2827 files changed, 517620 insertions, 0 deletions

diff --git a/include/Kbuild b/include/Kbuild
new file mode 100644
index 00000000..8d226bfa
--- /dev/null
+++ b/include/Kbuild
@@ -0,0 +1,12 @@
+# Top-level Makefile calls into asm-$(ARCH)
+# List only non-arch directories below
+
+header-y += asm-generic/
+header-y += linux/
+header-y += sound/
+header-y += mtd/
+header-y += rdma/
+header-y += video/
+header-y += drm/
+header-y += xen/
+header-y += scsi/
diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h
new file mode 100644
index 00000000..03f14856
--- /dev/null
+++ b/include/acpi/acconfig.h
@@ -0,0 +1,248 @@
+/******************************************************************************
+ *
+ * Name: acconfig.h - Global configuration constants
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef _ACCONFIG_H
+#define _ACCONFIG_H
+
+/******************************************************************************
+ *
+ * Configuration options
+ *
+ *****************************************************************************/
+
+/*
+ * ACPI_DEBUG_OUTPUT    - This switch enables all the debug facilities of the
+ *                        ACPI subsystem.  This includes the DEBUG_PRINT output
+ *                        statements.  When disabled, all DEBUG_PRINT
+ *                        statements are compiled out.
+ *
+ * ACPI_APPLICATION     - Use this switch if the subsystem is going to be run
+ *                        at the application level.
+ *
+ */
+
+/*
+ * OS name, used for the _OS object.  The _OS object is essentially obsolete,
+ * but there is a large base of ASL/AML code in existing machines that check
+ * for the string below.  The use of this string usually guarantees that
+ * the ASL will execute down the most tested code path.  Also, there is some
+ * code that will not execute the _OSI method unless _OS matches the string
+ * below.  Therefore, change this string at your own risk.
+ */
+#define ACPI_OS_NAME                    "Microsoft Windows NT"
+
+/* Maximum objects in the various object caches */
+
+#define ACPI_MAX_STATE_CACHE_DEPTH      96	/* State objects */
+#define ACPI_MAX_PARSE_CACHE_DEPTH      96	/* Parse tree objects */
+#define ACPI_MAX_EXTPARSE_CACHE_DEPTH   96	/* Parse tree objects */
+#define ACPI_MAX_OBJECT_CACHE_DEPTH     96	/* Interpreter operand objects */
+#define ACPI_MAX_NAMESPACE_CACHE_DEPTH  96	/* Namespace objects */
+
+/*
+ * Should the subsystem abort the loading of an ACPI table if the
+ * table checksum is incorrect?
+ */
+#define ACPI_CHECKSUM_ABORT             FALSE
+
+/*
+ * Generate a version of ACPICA that only supports "reduced hardware"
+ * platforms (as defined in ACPI 5.0). Set to TRUE to generate a specialized
+ * version of ACPICA that ONLY supports the ACPI 5.0 "reduced hardware"
+ * model. In other words, no ACPI hardware is supported.
+ *
+ * If TRUE, this means no support for the following:
+ *      PM Event and Control registers
+ *      SCI interrupt (and handler)
+ *      Fixed Events
+ *      General Purpose Events (GPEs)
+ *      Global Lock
+ *      ACPI PM timer
+ *      FACS table (Waking vectors and Global Lock)
+ */
+#define ACPI_REDUCED_HARDWARE           FALSE
+
+/******************************************************************************
+ *
+ * Subsystem Constants
+ *
+ *****************************************************************************/
+
+/* Version of ACPI supported */
+
+#define ACPI_CA_SUPPORT_LEVEL           5
+
+/* Maximum count for a semaphore object */
+
+#define ACPI_MAX_SEMAPHORE_COUNT        256
+
+/* Maximum object reference count (detects object deletion issues) */
+
+#define ACPI_MAX_REFERENCE_COUNT        0x1000
+
+/* Default page size for use in mapping memory for operation regions */
+
+#define ACPI_DEFAULT_PAGE_SIZE          4096	/* Must be power of 2 */
+
+/* owner_id tracking. 8 entries allows for 255 owner_ids */
+
+#define ACPI_NUM_OWNERID_MASKS          8
+
+/* Size of the root table array is increased by this increment */
+
+#define ACPI_ROOT_TABLE_SIZE_INCREMENT  4
+
+/* Maximum number of While() loop iterations before forced abort */
+
+#define ACPI_MAX_LOOP_ITERATIONS        0xFFFF
+
+/* Maximum sleep allowed via Sleep() operator */
+
+#define ACPI_MAX_SLEEP                  2000	/* Two seconds */
+
+/* Address Range lists are per-space_id (Memory and I/O only) */
+
+#define ACPI_ADDRESS_RANGE_MAX          2
+
+/******************************************************************************
+ *
+ * ACPI Specification constants (Do not change unless the specification changes)
+ *
+ *****************************************************************************/
+
+/* Number of distinct GPE register blocks and register width */
+
+#define ACPI_MAX_GPE_BLOCKS             2
+#define ACPI_GPE_REGISTER_WIDTH         8
+
+/* Method info (in WALK_STATE), containing local variables and argumetns */
+
+#define ACPI_METHOD_NUM_LOCALS          8
+#define ACPI_METHOD_MAX_LOCAL           7
+
+#define ACPI_METHOD_NUM_ARGS            7
+#define ACPI_METHOD_MAX_ARG             6
+
+/* Length of _HID, _UID, _CID, and UUID values */
+
+#define ACPI_DEVICE_ID_LENGTH           0x09
+#define ACPI_MAX_CID_LENGTH             48
+#define ACPI_UUID_LENGTH                16
+
+/*
+ * Operand Stack (in WALK_STATE), Must be large enough to contain METHOD_MAX_ARG
+ */
+#define ACPI_OBJ_NUM_OPERANDS           8
+#define ACPI_OBJ_MAX_OPERAND            7
+
+/* Number of elements in the Result Stack frame, can be an arbitrary value */
+
+#define ACPI_RESULTS_FRAME_OBJ_NUM      8
+
+/*
+ * Maximal number of elements the Result Stack can contain,
+ * it may be an arbitray value not exceeding the types of
+ * result_size and result_count (now u8).
+ */
+#define ACPI_RESULTS_OBJ_NUM_MAX        255
+
+/* Names within the namespace are 4 bytes long */
+
+#define ACPI_NAME_SIZE                  4
+#define ACPI_PATH_SEGMENT_LENGTH        5	/* 4 chars for name + 1 char for separator */
+#define ACPI_PATH_SEPARATOR             '.'
+
+/* Sizes for ACPI table headers */
+
+#define ACPI_OEM_ID_SIZE                6
+#define ACPI_OEM_TABLE_ID_SIZE          8
+
+/* Constants used in searching for the RSDP in low memory */
+
+#define ACPI_EBDA_PTR_LOCATION          0x0000040E	/* Physical Address */
+#define ACPI_EBDA_PTR_LENGTH            2
+#define ACPI_EBDA_WINDOW_SIZE           1024
+#define ACPI_HI_RSDP_WINDOW_BASE        0x000E0000	/* Physical Address */
+#define ACPI_HI_RSDP_WINDOW_SIZE        0x00020000
+#define ACPI_RSDP_SCAN_STEP             16
+
+/* Operation regions */
+
+#define ACPI_USER_REGION_BEGIN          0x80
+
+/* Maximum space_ids for Operation Regions */
+
+#define ACPI_MAX_ADDRESS_SPACE          255
+
+/* Array sizes.  Used for range checking also */
+
+#define ACPI_MAX_MATCH_OPCODE           5
+
+/* RSDP checksums */
+
+#define ACPI_RSDP_CHECKSUM_LENGTH       20
+#define ACPI_RSDP_XCHECKSUM_LENGTH      36
+
+/* SMBus, GSBus and IPMI bidirectional buffer size */
+
+#define ACPI_SMBUS_BUFFER_SIZE          34
+#define ACPI_GSBUS_BUFFER_SIZE          34
+#define ACPI_IPMI_BUFFER_SIZE           66
+
+/* _sx_d and _sx_w control methods */
+
+#define ACPI_NUM_sx_d_METHODS           4
+#define ACPI_NUM_sx_w_METHODS           5
+
+/******************************************************************************
+ *
+ * ACPI AML Debugger
+ *
+ *****************************************************************************/
+
+#define ACPI_DEBUGGER_MAX_ARGS          8	/* Must be max method args + 1 */
+
+#define ACPI_DEBUGGER_COMMAND_PROMPT    '-'
+#define ACPI_DEBUGGER_EXECUTE_PROMPT    '%'
+
+#endif				/* _ACCONFIG_H */
diff --git a/include/acpi/acexcep.h b/include/acpi/acexcep.h
new file mode 100644
index 00000000..92d6e1d7
--- /dev/null
+++ b/include/acpi/acexcep.h
@@ -0,0 +1,300 @@
+/******************************************************************************
+ *
+ * Name: acexcep.h - Exception codes returned by the ACPI subsystem
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2011, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACEXCEP_H__
+#define __ACEXCEP_H__
+
+/*
+ * Exceptions returned by external ACPI interfaces
+ */
+#define AE_CODE_ENVIRONMENTAL           0x0000
+#define AE_CODE_PROGRAMMER              0x1000
+#define AE_CODE_ACPI_TABLES             0x2000
+#define AE_CODE_AML                     0x3000
+#define AE_CODE_CONTROL                 0x4000
+#define AE_CODE_MASK                    0xF000
+
+#define ACPI_SUCCESS(a)                 (!(a))
+#define ACPI_FAILURE(a)                 (a)
+
+#define ACPI_SKIP(a)                    (a == AE_CTRL_SKIP)
+#define AE_OK                           (acpi_status) 0x0000
+
+/*
+ * Environmental exceptions
+ */
+#define AE_ERROR                        (acpi_status) (0x0001 | AE_CODE_ENVIRONMENTAL)
+#define AE_NO_ACPI_TABLES               (acpi_status) (0x0002 | AE_CODE_ENVIRONMENTAL)
+#define AE_NO_NAMESPACE                 (acpi_status) (0x0003 | AE_CODE_ENVIRONMENTAL)
+#define AE_NO_MEMORY                    (acpi_status) (0x0004 | AE_CODE_ENVIRONMENTAL)
+#define AE_NOT_FOUND                    (acpi_status) (0x0005 | AE_CODE_ENVIRONMENTAL)
+#define AE_NOT_EXIST                    (acpi_status) (0x0006 | AE_CODE_ENVIRONMENTAL)
+#define AE_ALREADY_EXISTS               (acpi_status) (0x0007 | AE_CODE_ENVIRONMENTAL)
+#define AE_TYPE                         (acpi_status) (0x0008 | AE_CODE_ENVIRONMENTAL)
+#define AE_NULL_OBJECT                  (acpi_status) (0x0009 | AE_CODE_ENVIRONMENTAL)
+#define AE_NULL_ENTRY                   (acpi_status) (0x000A | AE_CODE_ENVIRONMENTAL)
+#define AE_BUFFER_OVERFLOW              (acpi_status) (0x000B | AE_CODE_ENVIRONMENTAL)
+#define AE_STACK_OVERFLOW               (acpi_status) (0x000C | AE_CODE_ENVIRONMENTAL)
+#define AE_STACK_UNDERFLOW              (acpi_status) (0x000D | AE_CODE_ENVIRONMENTAL)
+#define AE_NOT_IMPLEMENTED              (acpi_status) (0x000E | AE_CODE_ENVIRONMENTAL)
+#define AE_SUPPORT                      (acpi_status) (0x000F | AE_CODE_ENVIRONMENTAL)
+#define AE_LIMIT                        (acpi_status) (0x0010 | AE_CODE_ENVIRONMENTAL)
+#define AE_TIME                         (acpi_status) (0x0011 | AE_CODE_ENVIRONMENTAL)
+#define AE_ACQUIRE_DEADLOCK             (acpi_status) (0x0012 | AE_CODE_ENVIRONMENTAL)
+#define AE_RELEASE_DEADLOCK             (acpi_status) (0x0013 | AE_CODE_ENVIRONMENTAL)
+#define AE_NOT_ACQUIRED                 (acpi_status) (0x0014 | AE_CODE_ENVIRONMENTAL)
+#define AE_ALREADY_ACQUIRED             (acpi_status) (0x0015 | AE_CODE_ENVIRONMENTAL)
+#define AE_NO_HARDWARE_RESPONSE         (acpi_status) (0x0016 | AE_CODE_ENVIRONMENTAL)
+#define AE_NO_GLOBAL_LOCK               (acpi_status) (0x0017 | AE_CODE_ENVIRONMENTAL)
+#define AE_ABORT_METHOD                 (acpi_status) (0x0018 | AE_CODE_ENVIRONMENTAL)
+#define AE_SAME_HANDLER                 (acpi_status) (0x0019 | AE_CODE_ENVIRONMENTAL)
+#define AE_NO_HANDLER                   (acpi_status) (0x001A | AE_CODE_ENVIRONMENTAL)
+#define AE_OWNER_ID_LIMIT               (acpi_status) (0x001B | AE_CODE_ENVIRONMENTAL)
+#define AE_NOT_CONFIGURED               (acpi_status) (0x001C | AE_CODE_ENVIRONMENTAL)
+
+#define AE_CODE_ENV_MAX                 0x001C
+
+/*
+ * Programmer exceptions
+ */
+#define AE_BAD_PARAMETER                (acpi_status) (0x0001 | AE_CODE_PROGRAMMER)
+#define AE_BAD_CHARACTER                (acpi_status) (0x0002 | AE_CODE_PROGRAMMER)
+#define AE_BAD_PATHNAME                 (acpi_status) (0x0003 | AE_CODE_PROGRAMMER)
+#define AE_BAD_DATA                     (acpi_status) (0x0004 | AE_CODE_PROGRAMMER)
+#define AE_BAD_HEX_CONSTANT             (acpi_status) (0x0005 | AE_CODE_PROGRAMMER)
+#define AE_BAD_OCTAL_CONSTANT           (acpi_status) (0x0006 | AE_CODE_PROGRAMMER)
+#define AE_BAD_DECIMAL_CONSTANT         (acpi_status) (0x0007 | AE_CODE_PROGRAMMER)
+#define AE_MISSING_ARGUMENTS            (acpi_status) (0x0008 | AE_CODE_PROGRAMMER)
+#define AE_BAD_ADDRESS                  (acpi_status) (0x0009 | AE_CODE_PROGRAMMER)
+
+#define AE_CODE_PGM_MAX                 0x0009
+
+/*
+ * Acpi table exceptions
+ */
+#define AE_BAD_SIGNATURE                (acpi_status) (0x0001 | AE_CODE_ACPI_TABLES)
+#define AE_BAD_HEADER                   (acpi_status) (0x0002 | AE_CODE_ACPI_TABLES)
+#define AE_BAD_CHECKSUM                 (acpi_status) (0x0003 | AE_CODE_ACPI_TABLES)
+#define AE_BAD_VALUE                    (acpi_status) (0x0004 | AE_CODE_ACPI_TABLES)
+#define AE_INVALID_TABLE_LENGTH         (acpi_status) (0x0005 | AE_CODE_ACPI_TABLES)
+
+#define AE_CODE_TBL_MAX                 0x0005
+
+/*
+ * AML exceptions.  These are caused by problems with
+ * the actual AML byte stream
+ */
+#define AE_AML_BAD_OPCODE               (acpi_status) (0x0001 | AE_CODE_AML)
+#define AE_AML_NO_OPERAND               (acpi_status) (0x0002 | AE_CODE_AML)
+#define AE_AML_OPERAND_TYPE             (acpi_status) (0x0003 | AE_CODE_AML)
+#define AE_AML_OPERAND_VALUE            (acpi_status) (0x0004 | AE_CODE_AML)
+#define AE_AML_UNINITIALIZED_LOCAL      (acpi_status) (0x0005 | AE_CODE_AML)
+#define AE_AML_UNINITIALIZED_ARG        (acpi_status) (0x0006 | AE_CODE_AML)
+#define AE_AML_UNINITIALIZED_ELEMENT    (acpi_status) (0x0007 | AE_CODE_AML)
+#define AE_AML_NUMERIC_OVERFLOW         (acpi_status) (0x0008 | AE_CODE_AML)
+#define AE_AML_REGION_LIMIT             (acpi_status) (0x0009 | AE_CODE_AML)
+#define AE_AML_BUFFER_LIMIT             (acpi_status) (0x000A | AE_CODE_AML)
+#define AE_AML_PACKAGE_LIMIT            (acpi_status) (0x000B | AE_CODE_AML)
+#define AE_AML_DIVIDE_BY_ZERO           (acpi_status) (0x000C | AE_CODE_AML)
+#define AE_AML_BAD_NAME                 (acpi_status) (0x000D | AE_CODE_AML)
+#define AE_AML_NAME_NOT_FOUND           (acpi_status) (0x000E | AE_CODE_AML)
+#define AE_AML_INTERNAL                 (acpi_status) (0x000F | AE_CODE_AML)
+#define AE_AML_INVALID_SPACE_ID         (acpi_status) (0x0010 | AE_CODE_AML)
+#define AE_AML_STRING_LIMIT             (acpi_status) (0x0011 | AE_CODE_AML)
+#define AE_AML_NO_RETURN_VALUE          (acpi_status) (0x0012 | AE_CODE_AML)
+#define AE_AML_METHOD_LIMIT             (acpi_status) (0x0013 | AE_CODE_AML)
+#define AE_AML_NOT_OWNER                (acpi_status) (0x0014 | AE_CODE_AML)
+#define AE_AML_MUTEX_ORDER              (acpi_status) (0x0015 | AE_CODE_AML)
+#define AE_AML_MUTEX_NOT_ACQUIRED       (acpi_status) (0x0016 | AE_CODE_AML)
+#define AE_AML_INVALID_RESOURCE_TYPE    (acpi_status) (0x0017 | AE_CODE_AML)
+#define AE_AML_INVALID_INDEX            (acpi_status) (0x0018 | AE_CODE_AML)
+#define AE_AML_REGISTER_LIMIT           (acpi_status) (0x0019 | AE_CODE_AML)
+#define AE_AML_NO_WHILE                 (acpi_status) (0x001A | AE_CODE_AML)
+#define AE_AML_ALIGNMENT                (acpi_status) (0x001B | AE_CODE_AML)
+#define AE_AML_NO_RESOURCE_END_TAG      (acpi_status) (0x001C | AE_CODE_AML)
+#define AE_AML_BAD_RESOURCE_VALUE       (acpi_status) (0x001D | AE_CODE_AML)
+#define AE_AML_CIRCULAR_REFERENCE       (acpi_status) (0x001E | AE_CODE_AML)
+#define AE_AML_BAD_RESOURCE_LENGTH      (acpi_status) (0x001F | AE_CODE_AML)
+#define AE_AML_ILLEGAL_ADDRESS          (acpi_status) (0x0020 | AE_CODE_AML)
+#define AE_AML_INFINITE_LOOP            (acpi_status) (0x0021 | AE_CODE_AML)
+
+#define AE_CODE_AML_MAX                 0x0021
+
+/*
+ * Internal exceptions used for control
+ */
+#define AE_CTRL_RETURN_VALUE            (acpi_status) (0x0001 | AE_CODE_CONTROL)
+#define AE_CTRL_PENDING                 (acpi_status) (0x0002 | AE_CODE_CONTROL)
+#define AE_CTRL_TERMINATE               (acpi_status) (0x0003 | AE_CODE_CONTROL)
+#define AE_CTRL_TRUE                    (acpi_status) (0x0004 | AE_CODE_CONTROL)
+#define AE_CTRL_FALSE                   (acpi_status) (0x0005 | AE_CODE_CONTROL)
+#define AE_CTRL_DEPTH                   (acpi_status) (0x0006 | AE_CODE_CONTROL)
+#define AE_CTRL_END                     (acpi_status) (0x0007 | AE_CODE_CONTROL)
+#define AE_CTRL_TRANSFER                (acpi_status) (0x0008 | AE_CODE_CONTROL)
+#define AE_CTRL_BREAK                   (acpi_status) (0x0009 | AE_CODE_CONTROL)
+#define AE_CTRL_CONTINUE                (acpi_status) (0x000A | AE_CODE_CONTROL)
+#define AE_CTRL_SKIP                    (acpi_status) (0x000B | AE_CODE_CONTROL)
+#define AE_CTRL_PARSE_CONTINUE          (acpi_status) (0x000C | AE_CODE_CONTROL)
+#define AE_CTRL_PARSE_PENDING           (acpi_status) (0x000D | AE_CODE_CONTROL)
+
+#define AE_CODE_CTRL_MAX                0x000D
+
+/* Exception strings for acpi_format_exception */
+
+#ifdef DEFINE_ACPI_GLOBALS
+
+/*
+ * String versions of the exception codes above
+ * These strings must match the corresponding defines exactly
+ */
+char const *acpi_gbl_exception_names_env[] = {
+	"AE_OK",
+	"AE_ERROR",
+	"AE_NO_ACPI_TABLES",
+	"AE_NO_NAMESPACE",
+	"AE_NO_MEMORY",
+	"AE_NOT_FOUND",
+	"AE_NOT_EXIST",
+	"AE_ALREADY_EXISTS",
+	"AE_TYPE",
+	"AE_NULL_OBJECT",
+	"AE_NULL_ENTRY",
+	"AE_BUFFER_OVERFLOW",
+	"AE_STACK_OVERFLOW",
+	"AE_STACK_UNDERFLOW",
+	"AE_NOT_IMPLEMENTED",
+	"AE_SUPPORT",
+	"AE_LIMIT",
+	"AE_TIME",
+	"AE_ACQUIRE_DEADLOCK",
+	"AE_RELEASE_DEADLOCK",
+	"AE_NOT_ACQUIRED",
+	"AE_ALREADY_ACQUIRED",
+	"AE_NO_HARDWARE_RESPONSE",
+	"AE_NO_GLOBAL_LOCK",
+	"AE_ABORT_METHOD",
+	"AE_SAME_HANDLER",
+	"AE_NO_HANDLER",
+	"AE_OWNER_ID_LIMIT",
+	"AE_NOT_CONFIGURED"
+};
+
+char const *acpi_gbl_exception_names_pgm[] = {
+	NULL,
+	"AE_BAD_PARAMETER",
+	"AE_BAD_CHARACTER",
+	"AE_BAD_PATHNAME",
+	"AE_BAD_DATA",
+	"AE_BAD_HEX_CONSTANT",
+	"AE_BAD_OCTAL_CONSTANT",
+	"AE_BAD_DECIMAL_CONSTANT",
+	"AE_MISSING_ARGUMENTS",
+	"AE_BAD_ADDRESS"
+};
+
+char const *acpi_gbl_exception_names_tbl[] = {
+	NULL,
+	"AE_BAD_SIGNATURE",
+	"AE_BAD_HEADER",
+	"AE_BAD_CHECKSUM",
+	"AE_BAD_VALUE",
+	"AE_INVALID_TABLE_LENGTH"
+};
+
+char const *acpi_gbl_exception_names_aml[] = {
+	NULL,
+	"AE_AML_BAD_OPCODE",
+	"AE_AML_NO_OPERAND",
+	"AE_AML_OPERAND_TYPE",
+	"AE_AML_OPERAND_VALUE",
+	"AE_AML_UNINITIALIZED_LOCAL",
+	"AE_AML_UNINITIALIZED_ARG",
+	"AE_AML_UNINITIALIZED_ELEMENT",
+	"AE_AML_NUMERIC_OVERFLOW",
+	"AE_AML_REGION_LIMIT",
+	"AE_AML_BUFFER_LIMIT",
+	"AE_AML_PACKAGE_LIMIT",
+	"AE_AML_DIVIDE_BY_ZERO",
+	"AE_AML_BAD_NAME",
+	"AE_AML_NAME_NOT_FOUND",
+	"AE_AML_INTERNAL",
+	"AE_AML_INVALID_SPACE_ID",
+	"AE_AML_STRING_LIMIT",
+	"AE_AML_NO_RETURN_VALUE",
+	"AE_AML_METHOD_LIMIT",
+	"AE_AML_NOT_OWNER",
+	"AE_AML_MUTEX_ORDER",
+	"AE_AML_MUTEX_NOT_ACQUIRED",
+	"AE_AML_INVALID_RESOURCE_TYPE",
+	"AE_AML_INVALID_INDEX",
+	"AE_AML_REGISTER_LIMIT",
+	"AE_AML_NO_WHILE",
+	"AE_AML_ALIGNMENT",
+	"AE_AML_NO_RESOURCE_END_TAG",
+	"AE_AML_BAD_RESOURCE_VALUE",
+	"AE_AML_CIRCULAR_REFERENCE",
+	"AE_AML_BAD_RESOURCE_LENGTH",
+	"AE_AML_ILLEGAL_ADDRESS",
+	"AE_AML_INFINITE_LOOP"
+};
+
+char const *acpi_gbl_exception_names_ctrl[] = {
+	NULL,
+	"AE_CTRL_RETURN_VALUE",
+	"AE_CTRL_PENDING",
+	"AE_CTRL_TERMINATE",
+	"AE_CTRL_TRUE",
+	"AE_CTRL_FALSE",
+	"AE_CTRL_DEPTH",
+	"AE_CTRL_END",
+	"AE_CTRL_TRANSFER",
+	"AE_CTRL_BREAK",
+	"AE_CTRL_CONTINUE",
+	"AE_CTRL_SKIP",
+	"AE_CTRL_PARSE_CONTINUE",
+	"AE_CTRL_PARSE_PENDING"
+};
+
+#endif				/* ACPI GLOBALS */
+
+#endif				/* __ACEXCEP_H__ */
diff --git a/include/acpi/acnames.h b/include/acpi/acnames.h
new file mode 100644
index 00000000..38f50881
--- /dev/null
+++ b/include/acpi/acnames.h
@@ -0,0 +1,84 @@
+/******************************************************************************
+ *
+ * Name: acnames.h - Global names and strings
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2011, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACNAMES_H__
+#define __ACNAMES_H__
+
+/* Method names - these methods can appear anywhere in the namespace */
+
+#define METHOD_NAME__SB_        "_SB_"
+#define METHOD_NAME__HID        "_HID"
+#define METHOD_NAME__CID        "_CID"
+#define METHOD_NAME__UID        "_UID"
+#define METHOD_NAME__ADR        "_ADR"
+#define METHOD_NAME__INI        "_INI"
+#define METHOD_NAME__STA        "_STA"
+#define METHOD_NAME__REG        "_REG"
+#define METHOD_NAME__SEG        "_SEG"
+#define METHOD_NAME__BBN        "_BBN"
+#define METHOD_NAME__PRT        "_PRT"
+#define METHOD_NAME__CRS        "_CRS"
+#define METHOD_NAME__PRS        "_PRS"
+#define METHOD_NAME__AEI        "_AEI"
+#define METHOD_NAME__PRW        "_PRW"
+#define METHOD_NAME__SRS        "_SRS"
+
+/* Method names - these methods must appear at the namespace root */
+
+#define METHOD_PATHNAME__BFS    "\\_BFS"
+#define METHOD_PATHNAME__GTS    "\\_GTS"
+#define METHOD_PATHNAME__PTS    "\\_PTS"
+#define METHOD_PATHNAME__SST    "\\_SI._SST"
+#define METHOD_PATHNAME__WAK    "\\_WAK"
+
+/* Definitions of the predefined namespace names  */
+
+#define ACPI_UNKNOWN_NAME       (u32) 0x3F3F3F3F	/* Unknown name is "????" */
+#define ACPI_ROOT_NAME          (u32) 0x5F5F5F5C	/* Root name is    "\___" */
+
+#define ACPI_PREFIX_MIXED       (u32) 0x69706341	/* "Acpi" */
+#define ACPI_PREFIX_LOWER       (u32) 0x69706361	/* "acpi" */
+
+#define ACPI_NS_ROOT_PATH       "\\"
+
+#endif				/* __ACNAMES_H__  */
diff --git a/include/acpi/acoutput.h b/include/acpi/acoutput.h
new file mode 100644
index 00000000..d7bd661b
--- /dev/null
+++ b/include/acpi/acoutput.h
@@ -0,0 +1,283 @@
+/******************************************************************************
+ *
+ * Name: acoutput.h -- debug output
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2011, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACOUTPUT_H__
+#define __ACOUTPUT_H__
+
+/*
+ * Debug levels and component IDs. These are used to control the
+ * granularity of the output of the ACPI_DEBUG_PRINT macro -- on a
+ * per-component basis and a per-exception-type basis.
+ */
+
+/* Component IDs are used in the global "DebugLayer" */
+
+#define ACPI_UTILITIES              0x00000001
+#define ACPI_HARDWARE               0x00000002
+#define ACPI_EVENTS                 0x00000004
+#define ACPI_TABLES                 0x00000008
+#define ACPI_NAMESPACE              0x00000010
+#define ACPI_PARSER                 0x00000020
+#define ACPI_DISPATCHER             0x00000040
+#define ACPI_EXECUTER               0x00000080
+#define ACPI_RESOURCES              0x00000100
+#define ACPI_CA_DEBUGGER            0x00000200
+#define ACPI_OS_SERVICES            0x00000400
+#define ACPI_CA_DISASSEMBLER        0x00000800
+
+/* Component IDs for ACPI tools and utilities */
+
+#define ACPI_COMPILER               0x00001000
+#define ACPI_TOOLS                  0x00002000
+#define ACPI_EXAMPLE                0x00004000
+#define ACPI_DRIVER                 0x00008000
+#define DT_COMPILER                 0x00010000
+
+#define ACPI_ALL_COMPONENTS         0x0001FFFF
+#define ACPI_COMPONENT_DEFAULT      (ACPI_ALL_COMPONENTS)
+
+/* Component IDs reserved for ACPI drivers */
+
+#define ACPI_ALL_DRIVERS            0xFFFF0000
+
+/*
+ * Raw debug output levels, do not use these in the ACPI_DEBUG_PRINT macros
+ */
+#define ACPI_LV_INIT                0x00000001
+#define ACPI_LV_DEBUG_OBJECT        0x00000002
+#define ACPI_LV_INFO                0x00000004
+#define ACPI_LV_REPAIR              0x00000008
+#define ACPI_LV_ALL_EXCEPTIONS      0x0000000F
+
+/* Trace verbosity level 1 [Standard Trace Level] */
+
+#define ACPI_LV_INIT_NAMES          0x00000020
+#define ACPI_LV_PARSE               0x00000040
+#define ACPI_LV_LOAD                0x00000080
+#define ACPI_LV_DISPATCH            0x00000100
+#define ACPI_LV_EXEC                0x00000200
+#define ACPI_LV_NAMES               0x00000400
+#define ACPI_LV_OPREGION            0x00000800
+#define ACPI_LV_BFIELD              0x00001000
+#define ACPI_LV_TABLES              0x00002000
+#define ACPI_LV_VALUES              0x00004000
+#define ACPI_LV_OBJECTS             0x00008000
+#define ACPI_LV_RESOURCES           0x00010000
+#define ACPI_LV_USER_REQUESTS       0x00020000
+#define ACPI_LV_PACKAGE             0x00040000
+#define ACPI_LV_VERBOSITY1          0x0007FF40 | ACPI_LV_ALL_EXCEPTIONS
+
+/* Trace verbosity level 2 [Function tracing and memory allocation] */
+
+#define ACPI_LV_ALLOCATIONS         0x00100000
+#define ACPI_LV_FUNCTIONS           0x00200000
+#define ACPI_LV_OPTIMIZATIONS       0x00400000
+#define ACPI_LV_VERBOSITY2          0x00700000 | ACPI_LV_VERBOSITY1
+#define ACPI_LV_ALL                 ACPI_LV_VERBOSITY2
+
+/* Trace verbosity level 3 [Threading, I/O, and Interrupts] */
+
+#define ACPI_LV_MUTEX               0x01000000
+#define ACPI_LV_THREADS             0x02000000
+#define ACPI_LV_IO                  0x04000000
+#define ACPI_LV_INTERRUPTS          0x08000000
+#define ACPI_LV_VERBOSITY3          0x0F000000 | ACPI_LV_VERBOSITY2
+
+/* Exceptionally verbose output -- also used in the global "DebugLevel"  */
+
+#define ACPI_LV_AML_DISASSEMBLE     0x10000000
+#define ACPI_LV_VERBOSE_INFO        0x20000000
+#define ACPI_LV_FULL_TABLES         0x40000000
+#define ACPI_LV_EVENTS              0x80000000
+#define ACPI_LV_VERBOSE             0xF0000000
+
+/*
+ * Debug level macros that are used in the DEBUG_PRINT macros
+ */
+#define ACPI_DEBUG_LEVEL(dl)        (u32) dl,ACPI_DEBUG_PARAMETERS
+
+/*
+ * Exception level -- used in the global "DebugLevel"
+ *
+ * Note: For errors, use the ACPI_ERROR or ACPI_EXCEPTION interfaces.
+ * For warnings, use ACPI_WARNING.
+ */
+#define ACPI_DB_INIT                ACPI_DEBUG_LEVEL (ACPI_LV_INIT)
+#define ACPI_DB_DEBUG_OBJECT        ACPI_DEBUG_LEVEL (ACPI_LV_DEBUG_OBJECT)
+#define ACPI_DB_INFO                ACPI_DEBUG_LEVEL (ACPI_LV_INFO)
+#define ACPI_DB_REPAIR              ACPI_DEBUG_LEVEL (ACPI_LV_REPAIR)
+#define ACPI_DB_ALL_EXCEPTIONS      ACPI_DEBUG_LEVEL (ACPI_LV_ALL_EXCEPTIONS)
+
+/* Trace level -- also used in the global "DebugLevel" */
+
+#define ACPI_DB_INIT_NAMES          ACPI_DEBUG_LEVEL (ACPI_LV_INIT_NAMES)
+#define ACPI_DB_THREADS             ACPI_DEBUG_LEVEL (ACPI_LV_THREADS)
+#define ACPI_DB_PARSE               ACPI_DEBUG_LEVEL (ACPI_LV_PARSE)
+#define ACPI_DB_DISPATCH            ACPI_DEBUG_LEVEL (ACPI_LV_DISPATCH)
+#define ACPI_DB_LOAD                ACPI_DEBUG_LEVEL (ACPI_LV_LOAD)
+#define ACPI_DB_EXEC                ACPI_DEBUG_LEVEL (ACPI_LV_EXEC)
+#define ACPI_DB_NAMES               ACPI_DEBUG_LEVEL (ACPI_LV_NAMES)
+#define ACPI_DB_OPREGION            ACPI_DEBUG_LEVEL (ACPI_LV_OPREGION)
+#define ACPI_DB_BFIELD              ACPI_DEBUG_LEVEL (ACPI_LV_BFIELD)
+#define ACPI_DB_TABLES              ACPI_DEBUG_LEVEL (ACPI_LV_TABLES)
+#define ACPI_DB_FUNCTIONS           ACPI_DEBUG_LEVEL (ACPI_LV_FUNCTIONS)
+#define ACPI_DB_OPTIMIZATIONS       ACPI_DEBUG_LEVEL (ACPI_LV_OPTIMIZATIONS)
+#define ACPI_DB_VALUES              ACPI_DEBUG_LEVEL (ACPI_LV_VALUES)
+#define ACPI_DB_OBJECTS             ACPI_DEBUG_LEVEL (ACPI_LV_OBJECTS)
+#define ACPI_DB_ALLOCATIONS         ACPI_DEBUG_LEVEL (ACPI_LV_ALLOCATIONS)
+#define ACPI_DB_RESOURCES           ACPI_DEBUG_LEVEL (ACPI_LV_RESOURCES)
+#define ACPI_DB_IO                  ACPI_DEBUG_LEVEL (ACPI_LV_IO)
+#define ACPI_DB_INTERRUPTS          ACPI_DEBUG_LEVEL (ACPI_LV_INTERRUPTS)
+#define ACPI_DB_USER_REQUESTS       ACPI_DEBUG_LEVEL (ACPI_LV_USER_REQUESTS)
+#define ACPI_DB_PACKAGE             ACPI_DEBUG_LEVEL (ACPI_LV_PACKAGE)
+#define ACPI_DB_MUTEX               ACPI_DEBUG_LEVEL (ACPI_LV_MUTEX)
+#define ACPI_DB_EVENTS              ACPI_DEBUG_LEVEL (ACPI_LV_EVENTS)
+
+#define ACPI_DB_ALL                 ACPI_DEBUG_LEVEL (ACPI_LV_ALL)
+
+/* Defaults for debug_level, debug and normal */
+
+#define ACPI_DEBUG_DEFAULT          (ACPI_LV_INFO | ACPI_LV_REPAIR)
+#define ACPI_NORMAL_DEFAULT         (ACPI_LV_INIT | ACPI_LV_DEBUG_OBJECT | ACPI_LV_REPAIR)
+#define ACPI_DEBUG_ALL              (ACPI_LV_AML_DISASSEMBLE | ACPI_LV_ALL_EXCEPTIONS | ACPI_LV_ALL)
+
+#if defined (ACPI_DEBUG_OUTPUT) || !defined (ACPI_NO_ERROR_MESSAGES)
+/*
+ * The module name is used primarily for error and debug messages.
+ * The __FILE__ macro is not very useful for this, because it
+ * usually includes the entire pathname to the module making the
+ * debug output difficult to read.
+ */
+#define ACPI_MODULE_NAME(name)          static const char ACPI_UNUSED_VAR _acpi_module_name[] = name;
+#else
+/*
+ * For the no-debug and no-error-msg cases, we must at least define
+ * a null module name.
+ */
+#define ACPI_MODULE_NAME(name)
+#define _acpi_module_name ""
+#endif
+
+/*
+ * Ascii error messages can be configured out
+ */
+#ifndef ACPI_NO_ERROR_MESSAGES
+#define AE_INFO                         _acpi_module_name, __LINE__
+
+/*
+ * Error reporting. Callers module and line number are inserted by AE_INFO,
+ * the plist contains a set of parens to allow variable-length lists.
+ * These macros are used for both the debug and non-debug versions of the code.
+ */
+#define ACPI_INFO(plist)                acpi_info plist
+#define ACPI_WARNING(plist)             acpi_warning plist
+#define ACPI_EXCEPTION(plist)           acpi_exception plist
+#define ACPI_ERROR(plist)               acpi_error plist
+#define ACPI_DEBUG_OBJECT(obj,l,i)      acpi_ex_do_debug_object(obj,l,i)
+
+#else
+
+/* No error messages */
+
+#define ACPI_INFO(plist)
+#define ACPI_WARNING(plist)
+#define ACPI_EXCEPTION(plist)
+#define ACPI_ERROR(plist)
+#define ACPI_DEBUG_OBJECT(obj,l,i)
+
+#endif				/* ACPI_NO_ERROR_MESSAGES */
+
+/*
+ * Debug macros that are conditionally compiled
+ */
+#ifdef ACPI_DEBUG_OUTPUT
+
+/*
+ * If ACPI_GET_FUNCTION_NAME was not defined in the compiler-dependent header,
+ * define it now. This is the case where there the compiler does not support
+ * a __FUNCTION__ macro or equivalent.
+ */
+#ifndef ACPI_GET_FUNCTION_NAME
+#define ACPI_GET_FUNCTION_NAME          _acpi_function_name
+
+/*
+ * The Name parameter should be the procedure name as a quoted string.
+ * The function name is also used by the function exit macros below.
+ * Note: (const char) is used to be compatible with the debug interfaces
+ * and macros such as __FUNCTION__.
+ */
+#define ACPI_FUNCTION_NAME(name)        static const char _acpi_function_name[] = #name;
+
+#else
+/* Compiler supports __FUNCTION__ (or equivalent) -- Ignore this macro */
+
+#define ACPI_FUNCTION_NAME(name)
+#endif				/* ACPI_GET_FUNCTION_NAME */
+
+/*
+ * Common parameters used for debug output functions:
+ * line number, function name, module(file) name, component ID
+ */
+#define ACPI_DEBUG_PARAMETERS           __LINE__, ACPI_GET_FUNCTION_NAME, _acpi_module_name, _COMPONENT
+
+/*
+ * Master debug print macros
+ * Print message if and only if:
+ *    1) Debug print for the current component is enabled
+ *    2) Debug error level or trace level for the print statement is enabled
+ */
+#define ACPI_DEBUG_PRINT(plist)         acpi_debug_print plist
+#define ACPI_DEBUG_PRINT_RAW(plist)     acpi_debug_print_raw plist
+
+#else
+/*
+ * This is the non-debug case -- make everything go away,
+ * leaving no executable debug code!
+ */
+#define ACPI_FUNCTION_NAME(a)
+#define ACPI_DEBUG_PRINT(pl)
+#define ACPI_DEBUG_PRINT_RAW(pl)
+
+#endif				/* ACPI_DEBUG_OUTPUT */
+
+#endif				/* __ACOUTPUT_H__ */
diff --git a/include/acpi/acpi.h b/include/acpi/acpi.h
new file mode 100644
index 00000000..de39915f
--- /dev/null
+++ b/include/acpi/acpi.h
@@ -0,0 +1,66 @@
+/******************************************************************************
+ *
+ * Name: acpi.h - Master public include file used to interface to ACPICA
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2011, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACPI_H__
+#define __ACPI_H__
+
+/*
+ * Public include files for use by code that will interface to ACPICA.
+ *
+ * Information includes the ACPICA data types, names, exceptions, and
+ * external interface prototypes. Also included are the definitions for
+ * all ACPI tables (FADT, MADT, etc.)
+ *
+ * Note: The order of these include files is important.
+ */
+#include "platform/acenv.h"	/* Environment-specific items */
+#include "acnames.h"		/* Common ACPI names and strings */
+#include "actypes.h"		/* ACPICA data types and structures */
+#include "acexcep.h"		/* ACPICA exceptions */
+#include "actbl.h"		/* ACPI table definitions */
+#include "acoutput.h"		/* Error output and Debug macros */
+#include "acrestyp.h"		/* Resource Descriptor structs */
+#include "acpiosxf.h"		/* OSL interfaces (ACPICA-to-OS) */
+#include "acpixf.h"		/* ACPI core subsystem external interfaces */
+
+#endif				/* __ACPI_H__ */
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
new file mode 100644
index 00000000..f1c8ca60
--- /dev/null
+++ b/include/acpi/acpi_bus.h
@@ -0,0 +1,412 @@
+/*
+ *  acpi_bus.h - ACPI Bus Driver ($Revision: 22 $)
+ *
+ *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
+ *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or (at
+ *  your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#ifndef __ACPI_BUS_H__
+#define __ACPI_BUS_H__
+
+#include <linux/device.h>
+
+#include <acpi/acpi.h>
+
+/* TBD: Make dynamic */
+#define ACPI_MAX_HANDLES	10
+struct acpi_handle_list {
+	u32 count;
+	acpi_handle handles[ACPI_MAX_HANDLES];
+};
+
+/* acpi_utils.h */
+acpi_status
+acpi_extract_package(union acpi_object *package,
+		     struct acpi_buffer *format, struct acpi_buffer *buffer);
+acpi_status
+acpi_evaluate_integer(acpi_handle handle,
+		      acpi_string pathname,
+		      struct acpi_object_list *arguments, unsigned long long *data);
+acpi_status
+acpi_evaluate_reference(acpi_handle handle,
+			acpi_string pathname,
+			struct acpi_object_list *arguments,
+			struct acpi_handle_list *list);
+
+#ifdef CONFIG_ACPI
+
+#include <linux/proc_fs.h>
+
+#define ACPI_BUS_FILE_ROOT	"acpi"
+extern struct proc_dir_entry *acpi_root_dir;
+
+enum acpi_bus_removal_type {
+	ACPI_BUS_REMOVAL_NORMAL = 0,
+	ACPI_BUS_REMOVAL_EJECT,
+	ACPI_BUS_REMOVAL_SUPRISE,
+	ACPI_BUS_REMOVAL_TYPE_COUNT
+};
+
+enum acpi_bus_device_type {
+	ACPI_BUS_TYPE_DEVICE = 0,
+	ACPI_BUS_TYPE_POWER,
+	ACPI_BUS_TYPE_PROCESSOR,
+	ACPI_BUS_TYPE_THERMAL,
+	ACPI_BUS_TYPE_POWER_BUTTON,
+	ACPI_BUS_TYPE_SLEEP_BUTTON,
+	ACPI_BUS_DEVICE_TYPE_COUNT
+};
+
+struct acpi_driver;
+struct acpi_device;
+
+/*
+ * ACPI Driver
+ * -----------
+ */
+
+typedef int (*acpi_op_add) (struct acpi_device * device);
+typedef int (*acpi_op_remove) (struct acpi_device * device, int type);
+typedef int (*acpi_op_start) (struct acpi_device * device);
+typedef int (*acpi_op_suspend) (struct acpi_device * device,
+				pm_message_t state);
+typedef int (*acpi_op_resume) (struct acpi_device * device);
+typedef int (*acpi_op_bind) (struct acpi_device * device);
+typedef int (*acpi_op_unbind) (struct acpi_device * device);
+typedef void (*acpi_op_notify) (struct acpi_device * device, u32 event);
+
+struct acpi_bus_ops {
+	u32 acpi_op_add:1;
+	u32 acpi_op_start:1;
+};
+
+struct acpi_device_ops {
+	acpi_op_add add;
+	acpi_op_remove remove;
+	acpi_op_start start;
+	acpi_op_suspend suspend;
+	acpi_op_resume resume;
+	acpi_op_bind bind;
+	acpi_op_unbind unbind;
+	acpi_op_notify notify;
+};
+
+#define ACPI_DRIVER_ALL_NOTIFY_EVENTS	0x1	/* system AND device events */
+
+struct acpi_driver {
+	char name[80];
+	char class[80];
+	const struct acpi_device_id *ids; /* Supported Hardware IDs */
+	unsigned int flags;
+	struct acpi_device_ops ops;
+	struct device_driver drv;
+	struct module *owner;
+};
+
+/*
+ * ACPI Device
+ * -----------
+ */
+
+/* Status (_STA) */
+
+struct acpi_device_status {
+	u32 present:1;
+	u32 enabled:1;
+	u32 show_in_ui:1;
+	u32 functional:1;
+	u32 battery_present:1;
+	u32 reserved:27;
+};
+
+/* Flags */
+
+struct acpi_device_flags {
+	u32 dynamic_status:1;
+	u32 bus_address:1;
+	u32 removable:1;
+	u32 ejectable:1;
+	u32 lockable:1;
+	u32 suprise_removal_ok:1;
+	u32 power_manageable:1;
+	u32 performance_manageable:1;
+	u32 reserved:24;
+};
+
+/* File System */
+
+struct acpi_device_dir {
+	struct proc_dir_entry *entry;
+};
+
+#define acpi_device_dir(d)	((d)->dir.entry)
+
+/* Plug and Play */
+
+typedef char acpi_bus_id[8];
+typedef unsigned long acpi_bus_address;
+typedef char acpi_device_name[40];
+typedef char acpi_device_class[20];
+
+struct acpi_hardware_id {
+	struct list_head list;
+	char *id;
+};
+
+struct acpi_device_pnp {
+	acpi_bus_id bus_id;	/* Object name */
+	acpi_bus_address bus_address;	/* _ADR */
+	char *unique_id;	/* _UID */
+	struct list_head ids;		/* _HID and _CIDs */
+	acpi_device_name device_name;	/* Driver-determined */
+	acpi_device_class device_class;	/*        "          */
+};
+
+#define acpi_device_bid(d)	((d)->pnp.bus_id)
+#define acpi_device_adr(d)	((d)->pnp.bus_address)
+const char *acpi_device_hid(struct acpi_device *device);
+#define acpi_device_name(d)	((d)->pnp.device_name)
+#define acpi_device_class(d)	((d)->pnp.device_class)
+
+/* Power Management */
+
+struct acpi_device_power_flags {
+	u32 explicit_get:1;	/* _PSC present? */
+	u32 power_resources:1;	/* Power resources */
+	u32 inrush_current:1;	/* Serialize Dx->D0 */
+	u32 power_removed:1;	/* Optimize Dx->D0 */
+	u32 reserved:28;
+};
+
+struct acpi_device_power_state {
+	struct {
+		u8 valid:1;
+		u8 explicit_set:1;	/* _PSx present? */
+		u8 reserved:6;
+	} flags;
+	int power;		/* % Power (compared to D0) */
+	int latency;		/* Dx->D0 time (microseconds) */
+	struct acpi_handle_list resources;	/* Power resources referenced */
+};
+
+struct acpi_device_power {
+	int state;		/* Current state */
+	struct acpi_device_power_flags flags;
+	struct acpi_device_power_state states[ACPI_D_STATE_COUNT];	/* Power states (D0-D3Cold) */
+};
+
+/* Performance Management */
+
+struct acpi_device_perf_flags {
+	u8 reserved:8;
+};
+
+struct acpi_device_perf_state {
+	struct {
+		u8 valid:1;
+		u8 reserved:7;
+	} flags;
+	u8 power;		/* % Power (compared to P0) */
+	u8 performance;		/* % Performance (    "   ) */
+	int latency;		/* Px->P0 time (microseconds) */
+};
+
+struct acpi_device_perf {
+	int state;
+	struct acpi_device_perf_flags flags;
+	int state_count;
+	struct acpi_device_perf_state *states;
+};
+
+/* Wakeup Management */
+struct acpi_device_wakeup_flags {
+	u8 valid:1;		/* Can successfully enable wakeup? */
+	u8 run_wake:1;		/* Run-Wake GPE devices */
+	u8 notifier_present:1;  /* Wake-up notify handler has been installed */
+};
+
+struct acpi_device_wakeup {
+	acpi_handle gpe_device;
+	u64 gpe_number;
+	u64 sleep_state;
+	struct acpi_handle_list resources;
+	struct acpi_device_wakeup_flags flags;
+	int prepare_count;
+};
+
+/* Device */
+
+struct acpi_device {
+	int device_type;
+	acpi_handle handle;		/* no handle for fixed hardware */
+	struct acpi_device *parent;
+	struct list_head children;
+	struct list_head node;
+	struct list_head wakeup_list;
+	struct acpi_device_status status;
+	struct acpi_device_flags flags;
+	struct acpi_device_pnp pnp;
+	struct acpi_device_power power;
+	struct acpi_device_wakeup wakeup;
+	struct acpi_device_perf performance;
+	struct acpi_device_dir dir;
+	struct acpi_device_ops ops;
+	struct acpi_driver *driver;
+	void *driver_data;
+	struct device dev;
+	struct acpi_bus_ops bus_ops;	/* workaround for different code path for hotplug */
+	enum acpi_bus_removal_type removal_type;	/* indicate for different removal type */
+};
+
+static inline void *acpi_driver_data(struct acpi_device *d)
+{
+	return d->driver_data;
+}
+
+#define to_acpi_device(d)	container_of(d, struct acpi_device, dev)
+#define to_acpi_driver(d)	container_of(d, struct acpi_driver, drv)
+
+/* acpi_device.dev.bus == &acpi_bus_type */
+extern struct bus_type acpi_bus_type;
+
+/*
+ * Events
+ * ------
+ */
+
+struct acpi_bus_event {
+	struct list_head node;
+	acpi_device_class device_class;
+	acpi_bus_id bus_id;
+	u32 type;
+	u32 data;
+};
+
+extern struct kobject *acpi_kobj;
+extern int acpi_bus_generate_netlink_event(const char*, const char*, u8, int);
+void acpi_bus_private_data_handler(acpi_handle, void *);
+int acpi_bus_get_private_data(acpi_handle, void **);
+extern int acpi_notifier_call_chain(struct acpi_device *, u32, u32);
+extern int register_acpi_notifier(struct notifier_block *);
+extern int unregister_acpi_notifier(struct notifier_block *);
+
+extern int register_acpi_bus_notifier(struct notifier_block *nb);
+extern void unregister_acpi_bus_notifier(struct notifier_block *nb);
+/*
+ * External Functions
+ */
+
+int acpi_bus_get_device(acpi_handle handle, struct acpi_device **device);
+void acpi_bus_data_handler(acpi_handle handle, void *context);
+acpi_status acpi_bus_get_status_handle(acpi_handle handle,
+				       unsigned long long *sta);
+int acpi_bus_get_status(struct acpi_device *device);
+int acpi_bus_set_power(acpi_handle handle, int state);
+int acpi_bus_update_power(acpi_handle handle, int *state_p);
+bool acpi_bus_power_manageable(acpi_handle handle);
+bool acpi_bus_can_wakeup(acpi_handle handle);
+int acpi_power_resource_register_device(struct device *dev, acpi_handle handle);
+void acpi_power_resource_unregister_device(struct device *dev, acpi_handle handle);
+#ifdef CONFIG_ACPI_PROC_EVENT
+int acpi_bus_generate_proc_event(struct acpi_device *device, u8 type, int data);
+int acpi_bus_generate_proc_event4(const char *class, const char *bid, u8 type, int data);
+int acpi_bus_receive_event(struct acpi_bus_event *event);
+#else
+static inline int acpi_bus_generate_proc_event(struct acpi_device *device, u8 type, int data)
+	{ return 0; }
+#endif
+int acpi_bus_register_driver(struct acpi_driver *driver);
+void acpi_bus_unregister_driver(struct acpi_driver *driver);
+int acpi_bus_add(struct acpi_device **child, struct acpi_device *parent,
+		 acpi_handle handle, int type);
+int acpi_bus_trim(struct acpi_device *start, int rmdevice);
+int acpi_bus_start(struct acpi_device *device);
+acpi_status acpi_bus_get_ejd(acpi_handle handle, acpi_handle * ejd);
+int acpi_match_device_ids(struct acpi_device *device,
+			  const struct acpi_device_id *ids);
+int acpi_create_dir(struct acpi_device *);
+void acpi_remove_dir(struct acpi_device *);
+
+/*
+ * Bind physical devices with ACPI devices
+ */
+struct acpi_bus_type {
+	struct list_head list;
+	struct bus_type *bus;
+	/* For general devices under the bus */
+	int (*find_device) (struct device *, acpi_handle *);
+	/* For bridges, such as PCI root bridge, IDE controller */
+	int (*find_bridge) (struct device *, acpi_handle *);
+};
+int register_acpi_bus_type(struct acpi_bus_type *);
+int unregister_acpi_bus_type(struct acpi_bus_type *);
+struct device *acpi_get_physical_device(acpi_handle);
+
+struct acpi_pci_root {
+	struct list_head node;
+	struct acpi_device * device;
+	struct acpi_pci_id id;
+	struct pci_bus *bus;
+	u16 segment;
+	struct resource secondary;	/* downstream bus range */
+
+	u32 osc_support_set;	/* _OSC state of support bits */
+	u32 osc_control_set;	/* _OSC state of control bits */
+};
+
+/* helper */
+acpi_handle acpi_get_child(acpi_handle, u64);
+int acpi_is_root_bridge(acpi_handle);
+acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int);
+struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle);
+#define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)((dev)->archdata.acpi_handle))
+
+int acpi_enable_wakeup_device_power(struct acpi_device *dev, int state);
+int acpi_disable_wakeup_device_power(struct acpi_device *dev);
+
+#ifdef CONFIG_PM
+int acpi_pm_device_sleep_state(struct device *, int *);
+#else
+static inline int acpi_pm_device_sleep_state(struct device *d, int *p)
+{
+	if (p)
+		*p = ACPI_STATE_D0;
+	return ACPI_STATE_D3;
+}
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+int acpi_pm_device_run_wake(struct device *, bool);
+int acpi_pm_device_sleep_wake(struct device *, bool);
+#else
+static inline int acpi_pm_device_run_wake(struct device *dev, bool enable)
+{
+	return -ENODEV;
+}
+static inline int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
+{
+	return -ENODEV;
+}
+#endif
+
+#endif				/* CONFIG_ACPI */
+
+#endif /*__ACPI_BUS_H__*/
diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h
new file mode 100644
index 00000000..bb145e4b
--- /dev/null
+++ b/include/acpi/acpi_drivers.h
@@ -0,0 +1,157 @@
+/*
+ *  acpi_drivers.h  ($Revision: 31 $)
+ *
+ *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
+ *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or (at
+ *  your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#ifndef __ACPI_DRIVERS_H__
+#define __ACPI_DRIVERS_H__
+
+#include <linux/acpi.h>
+#include <acpi/acpi_bus.h>
+
+#define ACPI_MAX_STRING			80
+
+/*
+ * Please update drivers/acpi/debug.c and Documentation/acpi/debug.txt
+ * if you add to this list.
+ */
+#define ACPI_BUS_COMPONENT		0x00010000
+#define ACPI_AC_COMPONENT		0x00020000
+#define ACPI_BATTERY_COMPONENT		0x00040000
+#define ACPI_BUTTON_COMPONENT		0x00080000
+#define ACPI_SBS_COMPONENT		0x00100000
+#define ACPI_FAN_COMPONENT		0x00200000
+#define ACPI_PCI_COMPONENT		0x00400000
+#define ACPI_POWER_COMPONENT		0x00800000
+#define ACPI_CONTAINER_COMPONENT	0x01000000
+#define ACPI_SYSTEM_COMPONENT		0x02000000
+#define ACPI_THERMAL_COMPONENT		0x04000000
+#define ACPI_MEMORY_DEVICE_COMPONENT	0x08000000
+#define ACPI_VIDEO_COMPONENT		0x10000000
+#define ACPI_PROCESSOR_COMPONENT	0x20000000
+
+/*
+ * _HID definitions
+ * HIDs must conform to ACPI spec(6.1.4)
+ * Linux specific HIDs do not apply to this and begin with LNX:
+ */
+
+#define ACPI_POWER_HID			"LNXPOWER"
+#define ACPI_PROCESSOR_OBJECT_HID	"LNXCPU"
+#define ACPI_SYSTEM_HID			"LNXSYSTM"
+#define ACPI_THERMAL_HID		"LNXTHERM"
+#define ACPI_BUTTON_HID_POWERF		"LNXPWRBN"
+#define ACPI_BUTTON_HID_SLEEPF		"LNXSLPBN"
+#define ACPI_VIDEO_HID			"LNXVIDEO"
+#define ACPI_BAY_HID			"LNXIOBAY"
+#define ACPI_DOCK_HID			"LNXDOCK"
+/* Quirk for broken IBM BIOSes */
+#define ACPI_SMBUS_IBM_HID		"SMBUSIBM"
+
+/*
+ * For fixed hardware buttons, we fabricate acpi_devices with HID
+ * ACPI_BUTTON_HID_POWERF or ACPI_BUTTON_HID_SLEEPF.  Fixed hardware
+ * signals only an event; it doesn't supply a notification value.
+ * To allow drivers to treat notifications from fixed hardware the
+ * same as those from real devices, we turn the events into this
+ * notification value.
+ */
+#define ACPI_FIXED_HARDWARE_EVENT	0x100
+
+/* --------------------------------------------------------------------------
+                                       PCI
+   -------------------------------------------------------------------------- */
+
+
+/* ACPI PCI Interrupt Link (pci_link.c) */
+
+int acpi_irq_penalty_init(void);
+int acpi_pci_link_allocate_irq(acpi_handle handle, int index, int *triggering,
+			       int *polarity, char **name);
+int acpi_pci_link_free_irq(acpi_handle handle);
+
+/* ACPI PCI Interrupt Routing (pci_irq.c) */
+
+int acpi_pci_irq_add_prt(acpi_handle handle, struct pci_bus *bus);
+void acpi_pci_irq_del_prt(struct pci_bus *bus);
+
+/* ACPI PCI Device Binding (pci_bind.c) */
+
+struct pci_bus;
+
+struct pci_dev *acpi_get_pci_dev(acpi_handle);
+int acpi_pci_bind_root(struct acpi_device *device);
+
+/* Arch-defined function to add a bus to the system */
+
+struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root);
+void pci_acpi_crs_quirks(void);
+
+/* --------------------------------------------------------------------------
+                                    Processor
+   -------------------------------------------------------------------------- */
+
+#define ACPI_PROCESSOR_LIMIT_NONE	0x00
+#define ACPI_PROCESSOR_LIMIT_INCREMENT	0x01
+#define ACPI_PROCESSOR_LIMIT_DECREMENT	0x02
+
+/*--------------------------------------------------------------------------
+                                  Dock Station
+  -------------------------------------------------------------------------- */
+struct acpi_dock_ops {
+	acpi_notify_handler handler;
+	acpi_notify_handler uevent;
+};
+
+#if defined(CONFIG_ACPI_DOCK) || defined(CONFIG_ACPI_DOCK_MODULE)
+extern int is_dock_device(acpi_handle handle);
+extern int register_dock_notifier(struct notifier_block *nb);
+extern void unregister_dock_notifier(struct notifier_block *nb);
+extern int register_hotplug_dock_device(acpi_handle handle,
+					const struct acpi_dock_ops *ops,
+					void *context);
+extern void unregister_hotplug_dock_device(acpi_handle handle);
+#else
+static inline int is_dock_device(acpi_handle handle)
+{
+	return 0;
+}
+static inline int register_dock_notifier(struct notifier_block *nb)
+{
+	return -ENODEV;
+}
+static inline void unregister_dock_notifier(struct notifier_block *nb)
+{
+}
+static inline int register_hotplug_dock_device(acpi_handle handle,
+					       const struct acpi_dock_ops *ops,
+					       void *context)
+{
+	return -ENODEV;
+}
+static inline void unregister_hotplug_dock_device(acpi_handle handle)
+{
+}
+#endif
+
+#endif /*__ACPI_DRIVERS_H__*/
diff --git a/include/acpi/acpi_numa.h b/include/acpi/acpi_numa.h
new file mode 100644
index 00000000..451823cb
--- /dev/null
+++ b/include/acpi/acpi_numa.h
@@ -0,0 +1,21 @@
+#ifndef __ACPI_NUMA_H
+#define __ACPI_NUMA_H
+
+#ifdef CONFIG_ACPI_NUMA
+#include <linux/kernel.h>
+
+/* Proximity bitmap length */
+#if MAX_NUMNODES > 256
+#define MAX_PXM_DOMAINS MAX_NUMNODES
+#else
+#define MAX_PXM_DOMAINS (256)	/* Old pxm spec is defined 8 bit */
+#endif
+
+extern int pxm_to_node(int);
+extern int node_to_pxm(int);
+extern void __acpi_map_pxm_to_node(int, int);
+extern int acpi_map_pxm_to_node(int);
+extern unsigned char acpi_srat_revision;
+
+#endif				/* CONFIG_ACPI_NUMA */
+#endif				/* __ACP_NUMA_H */
diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h
new file mode 100644
index 00000000..21a5548c
--- /dev/null
+++ b/include/acpi/acpiosxf.h
@@ -0,0 +1,281 @@
+
+/******************************************************************************
+ *
+ * Name: acpiosxf.h - All interfaces to the OS Services Layer (OSL).  These
+ *                    interfaces must be implemented by OSL to interface the
+ *                    ACPI components to the host operating system.
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2011, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACPIOSXF_H__
+#define __ACPIOSXF_H__
+
+#include "platform/acenv.h"
+#include "actypes.h"
+
+/* Types for acpi_os_execute */
+
+typedef enum {
+	OSL_GLOBAL_LOCK_HANDLER,
+	OSL_NOTIFY_HANDLER,
+	OSL_GPE_HANDLER,
+	OSL_DEBUGGER_THREAD,
+	OSL_EC_POLL_HANDLER,
+	OSL_EC_BURST_HANDLER
+} acpi_execute_type;
+
+#define ACPI_NO_UNIT_LIMIT          ((u32) -1)
+#define ACPI_MUTEX_SEM              1
+
+/* Functions for acpi_os_signal */
+
+#define ACPI_SIGNAL_FATAL           0
+#define ACPI_SIGNAL_BREAKPOINT      1
+
+struct acpi_signal_fatal_info {
+	u32 type;
+	u32 code;
+	u32 argument;
+};
+
+/*
+ * OSL Initialization and shutdown primitives
+ */
+acpi_status __initdata acpi_os_initialize(void);
+
+acpi_status acpi_os_terminate(void);
+
+/*
+ * ACPI Table interfaces
+ */
+acpi_physical_address acpi_os_get_root_pointer(void);
+
+acpi_status
+acpi_os_predefined_override(const struct acpi_predefined_names *init_val,
+			    acpi_string * new_val);
+
+acpi_status
+acpi_os_table_override(struct acpi_table_header *existing_table,
+		       struct acpi_table_header **new_table);
+
+acpi_status
+acpi_os_physical_table_override(struct acpi_table_header *existing_table,
+				acpi_physical_address * new_address,
+				u32 *new_table_length);
+
+/*
+ * Spinlock primitives
+ */
+
+#ifndef acpi_os_create_lock
+acpi_status
+acpi_os_create_lock(acpi_spinlock *out_handle);
+#endif
+
+void acpi_os_delete_lock(acpi_spinlock handle);
+
+acpi_cpu_flags acpi_os_acquire_lock(acpi_spinlock handle);
+
+void acpi_os_release_lock(acpi_spinlock handle, acpi_cpu_flags flags);
+
+/*
+ * Semaphore primitives
+ */
+acpi_status
+acpi_os_create_semaphore(u32 max_units,
+			 u32 initial_units, acpi_semaphore * out_handle);
+
+acpi_status acpi_os_delete_semaphore(acpi_semaphore handle);
+
+acpi_status
+acpi_os_wait_semaphore(acpi_semaphore handle, u32 units, u16 timeout);
+
+acpi_status acpi_os_signal_semaphore(acpi_semaphore handle, u32 units);
+
+/*
+ * Mutex primitives. May be configured to use semaphores instead via
+ * ACPI_MUTEX_TYPE (see platform/acenv.h)
+ */
+#if (ACPI_MUTEX_TYPE != ACPI_BINARY_SEMAPHORE)
+
+acpi_status acpi_os_create_mutex(acpi_mutex * out_handle);
+
+void acpi_os_delete_mutex(acpi_mutex handle);
+
+acpi_status acpi_os_acquire_mutex(acpi_mutex handle, u16 timeout);
+
+void acpi_os_release_mutex(acpi_mutex handle);
+#endif
+
+/*
+ * Memory allocation and mapping
+ */
+void *acpi_os_allocate(acpi_size size);
+
+void __iomem *acpi_os_map_memory(acpi_physical_address where,
+				acpi_size length);
+
+void acpi_os_unmap_memory(void __iomem * logical_address, acpi_size size);
+void early_acpi_os_unmap_memory(void __iomem * virt, acpi_size size);
+
+#ifdef ACPI_FUTURE_USAGE
+acpi_status
+acpi_os_get_physical_address(void *logical_address,
+			     acpi_physical_address * physical_address);
+#endif
+
+/*
+ * Memory/Object Cache
+ */
+acpi_status
+acpi_os_create_cache(char *cache_name,
+		     u16 object_size,
+		     u16 max_depth, acpi_cache_t ** return_cache);
+
+acpi_status acpi_os_delete_cache(acpi_cache_t * cache);
+
+acpi_status acpi_os_purge_cache(acpi_cache_t * cache);
+
+void *acpi_os_acquire_object(acpi_cache_t * cache);
+
+acpi_status acpi_os_release_object(acpi_cache_t * cache, void *object);
+
+/*
+ * Interrupt handlers
+ */
+acpi_status
+acpi_os_install_interrupt_handler(u32 gsi,
+				  acpi_osd_handler service_routine,
+				  void *context);
+
+acpi_status
+acpi_os_remove_interrupt_handler(u32 gsi, acpi_osd_handler service_routine);
+
+void acpi_os_gpe_count(u32 gpe_number);
+void acpi_os_fixed_event_count(u32 fixed_event_number);
+
+/*
+ * Threads and Scheduling
+ */
+extern struct workqueue_struct *kacpi_hotplug_wq;
+
+acpi_thread_id acpi_os_get_thread_id(void);
+
+acpi_status
+acpi_os_execute(acpi_execute_type type,
+		acpi_osd_exec_callback function, void *context);
+
+acpi_status
+acpi_os_hotplug_execute(acpi_osd_exec_callback function, void *context);
+
+void acpi_os_wait_events_complete(void *context);
+
+void acpi_os_sleep(u64 milliseconds);
+
+void acpi_os_stall(u32 microseconds);
+
+/*
+ * Platform and hardware-independent I/O interfaces
+ */
+acpi_status acpi_os_read_port(acpi_io_address address, u32 * value, u32 width);
+
+acpi_status acpi_os_write_port(acpi_io_address address, u32 value, u32 width);
+
+/*
+ * Platform and hardware-independent physical memory interfaces
+ */
+acpi_status
+acpi_os_read_memory(acpi_physical_address address, u64 *value, u32 width);
+
+acpi_status
+acpi_os_write_memory(acpi_physical_address address, u64 value, u32 width);
+
+/*
+ * Platform and hardware-independent PCI configuration space access
+ * Note: Can't use "Register" as a parameter, changed to "Reg" --
+ * certain compilers complain.
+ */
+acpi_status
+acpi_os_read_pci_configuration(struct acpi_pci_id *pci_id,
+			       u32 reg, u64 *value, u32 width);
+
+acpi_status
+acpi_os_write_pci_configuration(struct acpi_pci_id *pci_id,
+				u32 reg, u64 value, u32 width);
+
+/*
+ * Miscellaneous
+ */
+u64 acpi_os_get_timer(void);
+
+acpi_status acpi_os_signal(u32 function, void *info);
+
+/*
+ * Debug print routines
+ */
+void ACPI_INTERNAL_VAR_XFACE acpi_os_printf(const char *format, ...);
+
+void acpi_os_vprintf(const char *format, va_list args);
+
+void acpi_os_redirect_output(void *destination);
+
+#ifdef ACPI_FUTURE_USAGE
+/*
+ * Debug input
+ */
+u32 acpi_os_get_line(char *buffer);
+#endif
+
+/*
+ * Directory manipulation
+ */
+void *acpi_os_open_directory(char *pathname,
+			     char *wildcard_spec, char requested_file_type);
+
+/* requeste_file_type values */
+
+#define REQUEST_FILE_ONLY                   0
+#define REQUEST_DIR_ONLY                    1
+
+char *acpi_os_get_next_filename(void *dir_handle);
+
+void acpi_os_close_directory(void *dir_handle);
+
+#endif				/* __ACPIOSXF_H__ */
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
new file mode 100644
index 00000000..98211013
--- /dev/null
+++ b/include/acpi/acpixf.h
@@ -0,0 +1,553 @@
+
+/******************************************************************************
+ *
+ * Name: acpixf.h - External interfaces to the ACPI subsystem
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2011, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACXFACE_H__
+#define __ACXFACE_H__
+
+/* Current ACPICA subsystem version in YYYYMMDD format */
+
+#define ACPI_CA_VERSION                 0x20120320
+
+#include "acconfig.h"
+#include "actypes.h"
+#include "actbl.h"
+
+extern u8 acpi_gbl_permanent_mmap;
+
+/*
+ * Globals that are publicly available, allowing for
+ * run time configuration
+ */
+extern u32 acpi_dbg_level;
+extern u32 acpi_dbg_layer;
+extern u8 acpi_gbl_enable_interpreter_slack;
+extern u8 acpi_gbl_all_methods_serialized;
+extern u8 acpi_gbl_create_osi_method;
+extern u8 acpi_gbl_use_default_register_widths;
+extern acpi_name acpi_gbl_trace_method_name;
+extern u32 acpi_gbl_trace_flags;
+extern bool acpi_gbl_enable_aml_debug_object;
+extern u8 acpi_gbl_copy_dsdt_locally;
+extern u8 acpi_gbl_truncate_io_addresses;
+extern u8 acpi_gbl_disable_auto_repair;
+
+/*
+ * Hardware-reduced prototypes. All interfaces that use these macros will
+ * be configured out of the ACPICA build if the ACPI_REDUCED_HARDWARE flag
+ * is set to TRUE.
+ */
+#if (!ACPI_REDUCED_HARDWARE)
+#define ACPI_HW_DEPENDENT_RETURN_STATUS(prototype) \
+	prototype;
+
+#define ACPI_HW_DEPENDENT_RETURN_OK(prototype) \
+	prototype;
+
+#define ACPI_HW_DEPENDENT_RETURN_VOID(prototype) \
+	prototype;
+
+#else
+#define ACPI_HW_DEPENDENT_RETURN_STATUS(prototype) \
+	static ACPI_INLINE prototype {return(AE_NOT_CONFIGURED);}
+
+#define ACPI_HW_DEPENDENT_RETURN_OK(prototype) \
+	static ACPI_INLINE prototype {return(AE_OK);}
+
+#define ACPI_HW_DEPENDENT_RETURN_VOID(prototype) \
+	static ACPI_INLINE prototype {}
+
+#endif				/* !ACPI_REDUCED_HARDWARE */
+
+extern u32 acpi_current_gpe_count;
+extern struct acpi_table_fadt acpi_gbl_FADT;
+extern u8 acpi_gbl_system_awake_and_running;
+extern u8 acpi_gbl_reduced_hardware;	/* ACPI 5.0 */
+
+extern u32 acpi_rsdt_forced;
+/*
+ * Global interfaces
+ */
+acpi_status
+acpi_initialize_tables(struct acpi_table_desc *initial_storage,
+		       u32 initial_table_count, u8 allow_resize);
+
+acpi_status __init acpi_initialize_subsystem(void);
+
+acpi_status acpi_enable_subsystem(u32 flags);
+
+acpi_status acpi_initialize_objects(u32 flags);
+
+acpi_status acpi_terminate(void);
+
+#ifdef ACPI_FUTURE_USAGE
+acpi_status acpi_subsystem_status(void);
+#endif
+
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_enable(void))
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_disable(void))
+
+#ifdef ACPI_FUTURE_USAGE
+acpi_status acpi_get_system_info(struct acpi_buffer *ret_buffer);
+#endif
+
+const char *acpi_format_exception(acpi_status exception);
+
+acpi_status acpi_purge_cached_objects(void);
+
+acpi_status acpi_install_interface(acpi_string interface_name);
+
+acpi_status acpi_remove_interface(acpi_string interface_name);
+
+u32
+acpi_check_address_range(acpi_adr_space_type space_id,
+			 acpi_physical_address address,
+			 acpi_size length, u8 warn);
+
+/*
+ * ACPI Memory management
+ */
+void *acpi_allocate(u32 size);
+
+void *acpi_callocate(u32 size);
+
+void acpi_free(void *address);
+
+/*
+ * ACPI table manipulation interfaces
+ */
+acpi_status acpi_reallocate_root_table(void);
+
+acpi_status acpi_find_root_pointer(acpi_size *rsdp_address);
+
+acpi_status acpi_load_tables(void);
+
+acpi_status acpi_load_table(struct acpi_table_header *table_ptr);
+
+acpi_status acpi_unload_table_id(acpi_owner_id id);
+
+acpi_status
+acpi_get_table_header(acpi_string signature,
+		      u32 instance,
+		      struct acpi_table_header *out_table_header);
+
+acpi_status
+acpi_get_table_with_size(acpi_string signature,
+	       u32 instance, struct acpi_table_header **out_table,
+	       acpi_size *tbl_size);
+acpi_status
+acpi_get_table(acpi_string signature,
+	       u32 instance, struct acpi_table_header **out_table);
+
+acpi_status
+acpi_get_table_by_index(u32 table_index,
+			struct acpi_table_header **out_table);
+
+acpi_status
+acpi_install_table_handler(acpi_tbl_handler handler, void *context);
+
+acpi_status acpi_remove_table_handler(acpi_tbl_handler handler);
+
+/*
+ * Namespace and name interfaces
+ */
+acpi_status
+acpi_walk_namespace(acpi_object_type type,
+		    acpi_handle start_object,
+		    u32 max_depth,
+		    acpi_walk_callback pre_order_visit,
+		    acpi_walk_callback post_order_visit,
+		    void *context, void **return_value);
+
+acpi_status
+acpi_get_devices(const char *HID,
+		 acpi_walk_callback user_function,
+		 void *context, void **return_value);
+
+acpi_status
+acpi_get_name(acpi_handle object,
+	      u32 name_type, struct acpi_buffer *ret_path_ptr);
+
+acpi_status
+acpi_get_handle(acpi_handle parent,
+		acpi_string pathname, acpi_handle * ret_handle);
+
+acpi_status
+acpi_attach_data(acpi_handle object, acpi_object_handler handler, void *data);
+
+acpi_status acpi_detach_data(acpi_handle object, acpi_object_handler handler);
+
+acpi_status
+acpi_get_data(acpi_handle object, acpi_object_handler handler, void **data);
+
+acpi_status
+acpi_debug_trace(char *name, u32 debug_level, u32 debug_layer, u32 flags);
+
+/*
+ * Object manipulation and enumeration
+ */
+acpi_status
+acpi_evaluate_object(acpi_handle object,
+		     acpi_string pathname,
+		     struct acpi_object_list *parameter_objects,
+		     struct acpi_buffer *return_object_buffer);
+
+acpi_status
+acpi_evaluate_object_typed(acpi_handle object,
+			   acpi_string pathname,
+			   struct acpi_object_list *external_params,
+			   struct acpi_buffer *return_buffer,
+			   acpi_object_type return_type);
+
+acpi_status
+acpi_get_object_info(acpi_handle object,
+		     struct acpi_device_info **return_buffer);
+
+acpi_status acpi_install_method(u8 *buffer);
+
+acpi_status
+acpi_get_next_object(acpi_object_type type,
+		     acpi_handle parent,
+		     acpi_handle child, acpi_handle * out_handle);
+
+acpi_status acpi_get_type(acpi_handle object, acpi_object_type * out_type);
+
+acpi_status acpi_get_id(acpi_handle object, acpi_owner_id * out_type);
+
+acpi_status acpi_get_parent(acpi_handle object, acpi_handle * out_handle);
+
+/*
+ * Handler interfaces
+ */
+acpi_status
+acpi_install_initialization_handler(acpi_init_handler handler, u32 function);
+
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+				acpi_install_global_event_handler
+				(ACPI_GBL_EVENT_HANDLER handler, void *context))
+
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+				 acpi_install_fixed_event_handler(u32
+								  acpi_event,
+								  acpi_event_handler
+								  handler,
+								  void
+								  *context))
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+				 acpi_remove_fixed_event_handler(u32 acpi_event,
+								 acpi_event_handler
+								 handler))
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+				 acpi_install_gpe_handler(acpi_handle
+							  gpe_device,
+							  u32 gpe_number,
+							  u32 type,
+							  acpi_gpe_handler
+							  address,
+							  void *context))
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+				 acpi_remove_gpe_handler(acpi_handle gpe_device,
+							 u32 gpe_number,
+							 acpi_gpe_handler
+							 address))
+acpi_status
+acpi_install_notify_handler(acpi_handle device,
+			    u32 handler_type,
+			    acpi_notify_handler handler, void *context);
+
+acpi_status
+acpi_remove_notify_handler(acpi_handle device,
+			   u32 handler_type, acpi_notify_handler handler);
+
+acpi_status
+acpi_install_address_space_handler(acpi_handle device,
+				   acpi_adr_space_type space_id,
+				   acpi_adr_space_handler handler,
+				   acpi_adr_space_setup setup, void *context);
+
+acpi_status
+acpi_remove_address_space_handler(acpi_handle device,
+				  acpi_adr_space_type space_id,
+				  acpi_adr_space_handler handler);
+
+#ifdef ACPI_FUTURE_USAGE
+acpi_status acpi_install_exception_handler(acpi_exception_handler handler);
+#endif
+
+acpi_status acpi_install_interface_handler(acpi_interface_handler handler);
+
+/*
+ * Global Lock interfaces
+ */
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+				acpi_acquire_global_lock(u16 timeout,
+							 u32 *handle))
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+				acpi_release_global_lock(u32 handle))
+
+/*
+ * Interfaces to AML mutex objects
+ */
+acpi_status
+acpi_acquire_mutex(acpi_handle handle, acpi_string pathname, u16 timeout);
+
+acpi_status acpi_release_mutex(acpi_handle handle, acpi_string pathname);
+
+/*
+ * Fixed Event interfaces
+ */
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+				acpi_enable_event(u32 event, u32 flags))
+
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+				acpi_disable_event(u32 event, u32 flags))
+
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_clear_event(u32 event))
+
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+				acpi_get_event_status(u32 event,
+						      acpi_event_status
+						      *event_status))
+/*
+ * General Purpose Event (GPE) Interfaces
+ */
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_update_all_gpes(void))
+
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+				acpi_enable_gpe(acpi_handle gpe_device,
+						u32 gpe_number))
+
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+				acpi_disable_gpe(acpi_handle gpe_device,
+						 u32 gpe_number))
+
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+				acpi_clear_gpe(acpi_handle gpe_device,
+					       u32 gpe_number))
+
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+				acpi_set_gpe(acpi_handle gpe_device,
+					     u32 gpe_number, u8 action))
+
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+				acpi_finish_gpe(acpi_handle gpe_device,
+						u32 gpe_number))
+
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+				acpi_setup_gpe_for_wake(acpi_handle
+							parent_device,
+							acpi_handle gpe_device,
+							u32 gpe_number))
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+				 acpi_set_gpe_wake_mask(acpi_handle gpe_device,
+							u32 gpe_number,
+							u8 action))
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+				 acpi_get_gpe_status(acpi_handle gpe_device,
+						     u32 gpe_number,
+						     acpi_event_status
+						     *event_status))
+
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_disable_all_gpes(void))
+
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_enable_all_runtime_gpes(void))
+
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+				acpi_get_gpe_device(u32 gpe_index,
+						    acpi_handle * gpe_device))
+
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+				acpi_install_gpe_block(acpi_handle gpe_device,
+						       struct
+						       acpi_generic_address
+						       *gpe_block_address,
+						       u32 register_count,
+						       u32 interrupt_number))
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+				 acpi_remove_gpe_block(acpi_handle gpe_device))
+
+/*
+ * Resource interfaces
+ */
+typedef
+acpi_status(*acpi_walk_resource_callback) (struct acpi_resource * resource,
+					   void *context);
+
+acpi_status
+acpi_get_vendor_resource(acpi_handle device,
+			 char *name,
+			 struct acpi_vendor_uuid *uuid,
+			 struct acpi_buffer *ret_buffer);
+
+acpi_status
+acpi_get_current_resources(acpi_handle device, struct acpi_buffer *ret_buffer);
+
+#ifdef ACPI_FUTURE_USAGE
+acpi_status
+acpi_get_possible_resources(acpi_handle device, struct acpi_buffer *ret_buffer);
+#endif
+
+acpi_status
+acpi_get_event_resources(acpi_handle device_handle,
+			 struct acpi_buffer *ret_buffer);
+
+acpi_status
+acpi_walk_resources(acpi_handle device,
+		    char *name,
+		    acpi_walk_resource_callback user_function, void *context);
+
+acpi_status
+acpi_set_current_resources(acpi_handle device, struct acpi_buffer *in_buffer);
+
+acpi_status
+acpi_get_irq_routing_table(acpi_handle device, struct acpi_buffer *ret_buffer);
+
+acpi_status
+acpi_resource_to_address64(struct acpi_resource *resource,
+			   struct acpi_resource_address64 *out);
+
+acpi_status
+acpi_buffer_to_resource(u8 *aml_buffer,
+			u16 aml_buffer_length,
+			struct acpi_resource **resource_ptr);
+
+/*
+ * Hardware (ACPI device) interfaces
+ */
+acpi_status acpi_reset(void);
+
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+				acpi_read_bit_register(u32 register_id,
+						       u32 *return_value))
+
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+				acpi_write_bit_register(u32 register_id,
+							u32 value))
+
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+				acpi_set_firmware_waking_vector(u32
+								physical_address))
+
+#if ACPI_MACHINE_WIDTH == 64
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+				acpi_set_firmware_waking_vector64(u64
+								  physical_address))
+#endif
+
+acpi_status acpi_read(u64 *value, struct acpi_generic_address *reg);
+
+acpi_status acpi_write(u64 value, struct acpi_generic_address *reg);
+
+/*
+ * Sleep/Wake interfaces
+ */
+acpi_status
+acpi_get_sleep_type_data(u8 sleep_state, u8 * slp_typ_a, u8 * slp_typ_b);
+
+acpi_status acpi_enter_sleep_state_prep(u8 sleep_state);
+
+acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state, u8 flags);
+
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void))
+
+acpi_status acpi_leave_sleep_state_prep(u8 sleep_state, u8 flags);
+
+acpi_status acpi_leave_sleep_state(u8 sleep_state);
+
+/*
+ * ACPI Timer interfaces
+ */
+#ifdef ACPI_FUTURE_USAGE
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+				acpi_get_timer_resolution(u32 *resolution))
+
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_get_timer(u32 *ticks))
+
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
+				acpi_get_timer_duration(u32 start_ticks,
+							u32 end_ticks,
+							u32 *time_elapsed))
+#endif				/* ACPI_FUTURE_USAGE */
+
+/*
+ * Error/Warning output
+ */
+void ACPI_INTERNAL_VAR_XFACE
+acpi_error(const char *module_name,
+	   u32 line_number, const char *format, ...) ACPI_PRINTF_LIKE(3);
+
+void ACPI_INTERNAL_VAR_XFACE
+acpi_exception(const char *module_name,
+	       u32 line_number,
+	       acpi_status status, const char *format, ...) ACPI_PRINTF_LIKE(4);
+
+void ACPI_INTERNAL_VAR_XFACE
+acpi_warning(const char *module_name,
+	     u32 line_number, const char *format, ...) ACPI_PRINTF_LIKE(3);
+
+void ACPI_INTERNAL_VAR_XFACE
+acpi_info(const char *module_name,
+	  u32 line_number, const char *format, ...) ACPI_PRINTF_LIKE(3);
+
+/*
+ * Debug output
+ */
+#ifdef ACPI_DEBUG_OUTPUT
+
+void ACPI_INTERNAL_VAR_XFACE
+acpi_debug_print(u32 requested_debug_level,
+		 u32 line_number,
+		 const char *function_name,
+		 const char *module_name,
+		 u32 component_id, const char *format, ...) ACPI_PRINTF_LIKE(6);
+
+void ACPI_INTERNAL_VAR_XFACE
+acpi_debug_print_raw(u32 requested_debug_level,
+		     u32 line_number,
+		     const char *function_name,
+		     const char *module_name,
+		     u32 component_id,
+		     const char *format, ...) ACPI_PRINTF_LIKE(6);
+#endif
+
+#endif				/* __ACXFACE_H__ */
diff --git a/include/acpi/acrestyp.h b/include/acpi/acrestyp.h
new file mode 100644
index 00000000..3506e39a
--- /dev/null
+++ b/include/acpi/acrestyp.h
@@ -0,0 +1,604 @@
+/******************************************************************************
+ *
+ * Name: acrestyp.h - Defines, types, and structures for resource descriptors
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2011, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACRESTYP_H__
+#define __ACRESTYP_H__
+
+/*
+ * Definitions for Resource Attributes
+ */
+typedef u16 acpi_rs_length;	/* Resource Length field is fixed at 16 bits */
+typedef u32 acpi_rsdesc_size;	/* Max Resource Descriptor size is (Length+3) = (64_k-1)+3 */
+
+/*
+ * Memory Attributes
+ */
+#define ACPI_READ_ONLY_MEMORY           (u8) 0x00
+#define ACPI_READ_WRITE_MEMORY          (u8) 0x01
+
+#define ACPI_NON_CACHEABLE_MEMORY       (u8) 0x00
+#define ACPI_CACHABLE_MEMORY            (u8) 0x01
+#define ACPI_WRITE_COMBINING_MEMORY     (u8) 0x02
+#define ACPI_PREFETCHABLE_MEMORY        (u8) 0x03
+
+/*! [Begin] no source code translation */
+/*
+ * IO Attributes
+ * The ISA IO ranges are:     n000-n0FFh,  n400-n4FFh, n800-n8FFh, nC00-nCFFh.
+ * The non-ISA IO ranges are: n100-n3FFh,  n500-n7FFh, n900-nBFFh, nCD0-nFFFh.
+ */
+/*! [End] no source code translation !*/
+
+#define ACPI_NON_ISA_ONLY_RANGES        (u8) 0x01
+#define ACPI_ISA_ONLY_RANGES            (u8) 0x02
+#define ACPI_ENTIRE_RANGE               (ACPI_NON_ISA_ONLY_RANGES | ACPI_ISA_ONLY_RANGES)
+
+/* Type of translation - 1=Sparse, 0=Dense */
+
+#define ACPI_SPARSE_TRANSLATION         (u8) 0x01
+
+/*
+ * IO Port Descriptor Decode
+ */
+#define ACPI_DECODE_10                  (u8) 0x00	/* 10-bit IO address decode */
+#define ACPI_DECODE_16                  (u8) 0x01	/* 16-bit IO address decode */
+
+/*
+ * Interrupt attributes - used in multiple descriptors
+ */
+
+/* Triggering */
+
+#define ACPI_LEVEL_SENSITIVE            (u8) 0x00
+#define ACPI_EDGE_SENSITIVE             (u8) 0x01
+
+/* Polarity */
+
+#define ACPI_ACTIVE_HIGH                (u8) 0x00
+#define ACPI_ACTIVE_LOW                 (u8) 0x01
+#define ACPI_ACTIVE_BOTH                (u8) 0x02
+
+/* Sharing */
+
+#define ACPI_EXCLUSIVE                  (u8) 0x00
+#define ACPI_SHARED                     (u8) 0x01
+#define ACPI_EXCLUSIVE_AND_WAKE         (u8) 0x02
+#define ACPI_SHARED_AND_WAKE            (u8) 0x03
+
+/*
+ * DMA Attributes
+ */
+#define ACPI_COMPATIBILITY              (u8) 0x00
+#define ACPI_TYPE_A                     (u8) 0x01
+#define ACPI_TYPE_B                     (u8) 0x02
+#define ACPI_TYPE_F                     (u8) 0x03
+
+#define ACPI_NOT_BUS_MASTER             (u8) 0x00
+#define ACPI_BUS_MASTER                 (u8) 0x01
+
+#define ACPI_TRANSFER_8                 (u8) 0x00
+#define ACPI_TRANSFER_8_16              (u8) 0x01
+#define ACPI_TRANSFER_16                (u8) 0x02
+
+/*
+ * Start Dependent Functions Priority definitions
+ */
+#define ACPI_GOOD_CONFIGURATION         (u8) 0x00
+#define ACPI_ACCEPTABLE_CONFIGURATION   (u8) 0x01
+#define ACPI_SUB_OPTIMAL_CONFIGURATION  (u8) 0x02
+
+/*
+ * 16, 32 and 64-bit Address Descriptor resource types
+ */
+#define ACPI_MEMORY_RANGE               (u8) 0x00
+#define ACPI_IO_RANGE                   (u8) 0x01
+#define ACPI_BUS_NUMBER_RANGE           (u8) 0x02
+
+#define ACPI_ADDRESS_NOT_FIXED          (u8) 0x00
+#define ACPI_ADDRESS_FIXED              (u8) 0x01
+
+#define ACPI_POS_DECODE                 (u8) 0x00
+#define ACPI_SUB_DECODE                 (u8) 0x01
+
+/* Producer/Consumer */
+
+#define ACPI_PRODUCER                   (u8) 0x00
+#define ACPI_CONSUMER                   (u8) 0x01
+
+/*
+ * If possible, pack the following structures to byte alignment
+ */
+#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
+#pragma pack(1)
+#endif
+
+/* UUID data structures for use in vendor-defined resource descriptors */
+
+struct acpi_uuid {
+	u8 data[ACPI_UUID_LENGTH];
+};
+
+struct acpi_vendor_uuid {
+	u8 subtype;
+	u8 data[ACPI_UUID_LENGTH];
+};
+
+/*
+ * Structures used to describe device resources
+ */
+struct acpi_resource_irq {
+	u8 descriptor_length;
+	u8 triggering;
+	u8 polarity;
+	u8 sharable;
+	u8 interrupt_count;
+	u8 interrupts[1];
+};
+
+struct acpi_resource_dma {
+	u8 type;
+	u8 bus_master;
+	u8 transfer;
+	u8 channel_count;
+	u8 channels[1];
+};
+
+struct acpi_resource_start_dependent {
+	u8 descriptor_length;
+	u8 compatibility_priority;
+	u8 performance_robustness;
+};
+
+/*
+ * The END_DEPENDENT_FUNCTIONS_RESOURCE struct is not
+ * needed because it has no fields
+ */
+
+struct acpi_resource_io {
+	u8 io_decode;
+	u8 alignment;
+	u8 address_length;
+	u16 minimum;
+	u16 maximum;
+};
+
+struct acpi_resource_fixed_io {
+	u16 address;
+	u8 address_length;
+};
+
+struct acpi_resource_fixed_dma {
+	u16 request_lines;
+	u16 channels;
+	u8 width;
+};
+
+/* Values for Width field above */
+
+#define ACPI_DMA_WIDTH8                         0
+#define ACPI_DMA_WIDTH16                        1
+#define ACPI_DMA_WIDTH32                        2
+#define ACPI_DMA_WIDTH64                        3
+#define ACPI_DMA_WIDTH128                       4
+#define ACPI_DMA_WIDTH256                       5
+
+struct acpi_resource_vendor {
+	u16 byte_length;
+	u8 byte_data[1];
+};
+
+/* Vendor resource with UUID info (introduced in ACPI 3.0) */
+
+struct acpi_resource_vendor_typed {
+	u16 byte_length;
+	u8 uuid_subtype;
+	u8 uuid[ACPI_UUID_LENGTH];
+	u8 byte_data[1];
+};
+
+struct acpi_resource_end_tag {
+	u8 checksum;
+};
+
+struct acpi_resource_memory24 {
+	u8 write_protect;
+	u16 minimum;
+	u16 maximum;
+	u16 alignment;
+	u16 address_length;
+};
+
+struct acpi_resource_memory32 {
+	u8 write_protect;
+	u32 minimum;
+	u32 maximum;
+	u32 alignment;
+	u32 address_length;
+};
+
+struct acpi_resource_fixed_memory32 {
+	u8 write_protect;
+	u32 address;
+	u32 address_length;
+};
+
+struct acpi_memory_attribute {
+	u8 write_protect;
+	u8 caching;
+	u8 range_type;
+	u8 translation;
+};
+
+struct acpi_io_attribute {
+	u8 range_type;
+	u8 translation;
+	u8 translation_type;
+	u8 reserved1;
+};
+
+union acpi_resource_attribute {
+	struct acpi_memory_attribute mem;
+	struct acpi_io_attribute io;
+
+	/* Used for the *word_space macros */
+
+	u8 type_specific;
+};
+
+struct acpi_resource_source {
+	u8 index;
+	u16 string_length;
+	char *string_ptr;
+};
+
+/* Fields common to all address descriptors, 16/32/64 bit */
+
+#define ACPI_RESOURCE_ADDRESS_COMMON \
+	u8                                      resource_type; \
+	u8                                      producer_consumer; \
+	u8                                      decode; \
+	u8                                      min_address_fixed; \
+	u8                                      max_address_fixed; \
+	union acpi_resource_attribute           info;
+
+struct acpi_resource_address {
+ACPI_RESOURCE_ADDRESS_COMMON};
+
+struct acpi_resource_address16 {
+	ACPI_RESOURCE_ADDRESS_COMMON u16 granularity;
+	u16 minimum;
+	u16 maximum;
+	u16 translation_offset;
+	u16 address_length;
+	struct acpi_resource_source resource_source;
+};
+
+struct acpi_resource_address32 {
+	ACPI_RESOURCE_ADDRESS_COMMON u32 granularity;
+	u32 minimum;
+	u32 maximum;
+	u32 translation_offset;
+	u32 address_length;
+	struct acpi_resource_source resource_source;
+};
+
+struct acpi_resource_address64 {
+	ACPI_RESOURCE_ADDRESS_COMMON u64 granularity;
+	u64 minimum;
+	u64 maximum;
+	u64 translation_offset;
+	u64 address_length;
+	struct acpi_resource_source resource_source;
+};
+
+struct acpi_resource_extended_address64 {
+	ACPI_RESOURCE_ADDRESS_COMMON u8 revision_iD;
+	u64 granularity;
+	u64 minimum;
+	u64 maximum;
+	u64 translation_offset;
+	u64 address_length;
+	u64 type_specific;
+};
+
+struct acpi_resource_extended_irq {
+	u8 producer_consumer;
+	u8 triggering;
+	u8 polarity;
+	u8 sharable;
+	u8 interrupt_count;
+	struct acpi_resource_source resource_source;
+	u32 interrupts[1];
+};
+
+struct acpi_resource_generic_register {
+	u8 space_id;
+	u8 bit_width;
+	u8 bit_offset;
+	u8 access_size;
+	u64 address;
+};
+
+struct acpi_resource_gpio {
+	u8 revision_id;
+	u8 connection_type;
+	u8 producer_consumer;	/* For values, see Producer/Consumer above */
+	u8 pin_config;
+	u8 sharable;		/* For values, see Interrupt Attributes above */
+	u8 io_restriction;
+	u8 triggering;		/* For values, see Interrupt Attributes above */
+	u8 polarity;		/* For values, see Interrupt Attributes above */
+	u16 drive_strength;
+	u16 debounce_timeout;
+	u16 pin_table_length;
+	u16 vendor_length;
+	struct acpi_resource_source resource_source;
+	u16 *pin_table;
+	u8 *vendor_data;
+};
+
+/* Values for GPIO connection_type field above */
+
+#define ACPI_RESOURCE_GPIO_TYPE_INT             0
+#define ACPI_RESOURCE_GPIO_TYPE_IO              1
+
+/* Values for pin_config field above */
+
+#define ACPI_PIN_CONFIG_DEFAULT                 0
+#define ACPI_PIN_CONFIG_PULLUP                  1
+#define ACPI_PIN_CONFIG_PULLDOWN                2
+#define ACPI_PIN_CONFIG_NOPULL                  3
+
+/* Values for io_restriction field above */
+
+#define ACPI_IO_RESTRICT_NONE                   0
+#define ACPI_IO_RESTRICT_INPUT                  1
+#define ACPI_IO_RESTRICT_OUTPUT                 2
+#define ACPI_IO_RESTRICT_NONE_PRESERVE          3
+
+/* Common structure for I2C, SPI, and UART serial descriptors */
+
+#define ACPI_RESOURCE_SERIAL_COMMON \
+	u8                                      revision_id; \
+	u8                                      type; \
+	u8                                      producer_consumer;   /* For values, see Producer/Consumer above */\
+	u8                                      slave_mode; \
+	u8                                      type_revision_id; \
+	u16                                     type_data_length; \
+	u16                                     vendor_length; \
+	struct acpi_resource_source             resource_source; \
+	u8                                      *vendor_data;
+
+struct acpi_resource_common_serialbus {
+ACPI_RESOURCE_SERIAL_COMMON};
+
+/* Values for the Type field above */
+
+#define ACPI_RESOURCE_SERIAL_TYPE_I2C           1
+#define ACPI_RESOURCE_SERIAL_TYPE_SPI           2
+#define ACPI_RESOURCE_SERIAL_TYPE_UART          3
+
+/* Values for slave_mode field above */
+
+#define ACPI_CONTROLLER_INITIATED               0
+#define ACPI_DEVICE_INITIATED                   1
+
+struct acpi_resource_i2c_serialbus {
+	ACPI_RESOURCE_SERIAL_COMMON u8 access_mode;
+	u16 slave_address;
+	u32 connection_speed;
+};
+
+/* Values for access_mode field above */
+
+#define ACPI_I2C_7BIT_MODE                      0
+#define ACPI_I2C_10BIT_MODE                     1
+
+struct acpi_resource_spi_serialbus {
+	ACPI_RESOURCE_SERIAL_COMMON u8 wire_mode;
+	u8 device_polarity;
+	u8 data_bit_length;
+	u8 clock_phase;
+	u8 clock_polarity;
+	u16 device_selection;
+	u32 connection_speed;
+};
+
+/* Values for wire_mode field above */
+
+#define ACPI_SPI_4WIRE_MODE                     0
+#define ACPI_SPI_3WIRE_MODE                     1
+
+/* Values for device_polarity field above */
+
+#define ACPI_SPI_ACTIVE_LOW                     0
+#define ACPI_SPI_ACTIVE_HIGH                    1
+
+/* Values for clock_phase field above */
+
+#define ACPI_SPI_FIRST_PHASE                    0
+#define ACPI_SPI_SECOND_PHASE                   1
+
+/* Values for clock_polarity field above */
+
+#define ACPI_SPI_START_LOW                      0
+#define ACPI_SPI_START_HIGH                     1
+
+struct acpi_resource_uart_serialbus {
+	ACPI_RESOURCE_SERIAL_COMMON u8 endian;
+	u8 data_bits;
+	u8 stop_bits;
+	u8 flow_control;
+	u8 parity;
+	u8 lines_enabled;
+	u16 rx_fifo_size;
+	u16 tx_fifo_size;
+	u32 default_baud_rate;
+};
+
+/* Values for Endian field above */
+
+#define ACPI_UART_LITTLE_ENDIAN                 0
+#define ACPI_UART_BIG_ENDIAN                    1
+
+/* Values for data_bits field above */
+
+#define ACPI_UART_5_DATA_BITS                   0
+#define ACPI_UART_6_DATA_BITS                   1
+#define ACPI_UART_7_DATA_BITS                   2
+#define ACPI_UART_8_DATA_BITS                   3
+#define ACPI_UART_9_DATA_BITS                   4
+
+/* Values for stop_bits field above */
+
+#define ACPI_UART_NO_STOP_BITS                  0
+#define ACPI_UART_1_STOP_BIT                    1
+#define ACPI_UART_1P5_STOP_BITS                 2
+#define ACPI_UART_2_STOP_BITS                   3
+
+/* Values for flow_control field above */
+
+#define ACPI_UART_FLOW_CONTROL_NONE             0
+#define ACPI_UART_FLOW_CONTROL_HW               1
+#define ACPI_UART_FLOW_CONTROL_XON_XOFF         2
+
+/* Values for Parity field above */
+
+#define ACPI_UART_PARITY_NONE                   0
+#define ACPI_UART_PARITY_EVEN                   1
+#define ACPI_UART_PARITY_ODD                    2
+#define ACPI_UART_PARITY_MARK                   3
+#define ACPI_UART_PARITY_SPACE                  4
+
+/* Values for lines_enabled bitfield above */
+
+#define ACPI_UART_CARRIER_DETECT                (1<<2)
+#define ACPI_UART_RING_INDICATOR                (1<<3)
+#define ACPI_UART_DATA_SET_READY                (1<<4)
+#define ACPI_UART_DATA_TERMINAL_READY           (1<<5)
+#define ACPI_UART_CLEAR_TO_SEND                 (1<<6)
+#define ACPI_UART_REQUEST_TO_SEND               (1<<7)
+
+/* ACPI_RESOURCE_TYPEs */
+
+#define ACPI_RESOURCE_TYPE_IRQ                  0
+#define ACPI_RESOURCE_TYPE_DMA                  1
+#define ACPI_RESOURCE_TYPE_START_DEPENDENT      2
+#define ACPI_RESOURCE_TYPE_END_DEPENDENT        3
+#define ACPI_RESOURCE_TYPE_IO                   4
+#define ACPI_RESOURCE_TYPE_FIXED_IO             5
+#define ACPI_RESOURCE_TYPE_VENDOR               6
+#define ACPI_RESOURCE_TYPE_END_TAG              7
+#define ACPI_RESOURCE_TYPE_MEMORY24             8
+#define ACPI_RESOURCE_TYPE_MEMORY32             9
+#define ACPI_RESOURCE_TYPE_FIXED_MEMORY32       10
+#define ACPI_RESOURCE_TYPE_ADDRESS16            11
+#define ACPI_RESOURCE_TYPE_ADDRESS32            12
+#define ACPI_RESOURCE_TYPE_ADDRESS64            13
+#define ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64   14	/* ACPI 3.0 */
+#define ACPI_RESOURCE_TYPE_EXTENDED_IRQ         15
+#define ACPI_RESOURCE_TYPE_GENERIC_REGISTER     16
+#define ACPI_RESOURCE_TYPE_GPIO                 17	/* ACPI 5.0 */
+#define ACPI_RESOURCE_TYPE_FIXED_DMA            18	/* ACPI 5.0 */
+#define ACPI_RESOURCE_TYPE_SERIAL_BUS           19	/* ACPI 5.0 */
+#define ACPI_RESOURCE_TYPE_MAX                  19
+
+/* Master union for resource descriptors */
+
+union acpi_resource_data {
+	struct acpi_resource_irq irq;
+	struct acpi_resource_dma dma;
+	struct acpi_resource_start_dependent start_dpf;
+	struct acpi_resource_io io;
+	struct acpi_resource_fixed_io fixed_io;
+	struct acpi_resource_fixed_dma fixed_dma;
+	struct acpi_resource_vendor vendor;
+	struct acpi_resource_vendor_typed vendor_typed;
+	struct acpi_resource_end_tag end_tag;
+	struct acpi_resource_memory24 memory24;
+	struct acpi_resource_memory32 memory32;
+	struct acpi_resource_fixed_memory32 fixed_memory32;
+	struct acpi_resource_address16 address16;
+	struct acpi_resource_address32 address32;
+	struct acpi_resource_address64 address64;
+	struct acpi_resource_extended_address64 ext_address64;
+	struct acpi_resource_extended_irq extended_irq;
+	struct acpi_resource_generic_register generic_reg;
+	struct acpi_resource_gpio gpio;
+	struct acpi_resource_i2c_serialbus i2c_serial_bus;
+	struct acpi_resource_spi_serialbus spi_serial_bus;
+	struct acpi_resource_uart_serialbus uart_serial_bus;
+	struct acpi_resource_common_serialbus common_serial_bus;
+
+	/* Common fields */
+
+	struct acpi_resource_address address;	/* Common 16/32/64 address fields */
+};
+
+/* Common resource header */
+
+struct acpi_resource {
+	u32 type;
+	u32 length;
+	union acpi_resource_data data;
+};
+
+/* restore default alignment */
+
+#pragma pack()
+
+#define ACPI_RS_SIZE_NO_DATA                8	/* Id + Length fields */
+#define ACPI_RS_SIZE_MIN                    (u32) ACPI_ROUND_UP_TO_NATIVE_WORD (12)
+#define ACPI_RS_SIZE(type)                  (u32) (ACPI_RS_SIZE_NO_DATA + sizeof (type))
+
+#define ACPI_NEXT_RESOURCE(res)             (struct acpi_resource *)((u8 *) res + res->length)
+
+struct acpi_pci_routing_table {
+	u32 length;
+	u32 pin;
+	u64 address;		/* here for 64-bit alignment */
+	u32 source_index;
+	char source[4];		/* pad to 64 bits so sizeof() works in all cases */
+};
+
+#endif				/* __ACRESTYP_H__ */
diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h
new file mode 100644
index 00000000..8dea5466
--- /dev/null
+++ b/include/acpi/actbl.h
@@ -0,0 +1,380 @@
+/******************************************************************************
+ *
+ * Name: actbl.h - Basic ACPI Table Definitions
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2011, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACTBL_H__
+#define __ACTBL_H__
+
+/*******************************************************************************
+ *
+ * Fundamental ACPI tables
+ *
+ * This file contains definitions for the ACPI tables that are directly consumed
+ * by ACPICA. All other tables are consumed by the OS-dependent ACPI-related
+ * device drivers and other OS support code.
+ *
+ * The RSDP and FACS do not use the common ACPI table header. All other ACPI
+ * tables use the header.
+ *
+ ******************************************************************************/
+
+/*
+ * Values for description table header signatures for tables defined in this
+ * file. Useful because they make it more difficult to inadvertently type in
+ * the wrong signature.
+ */
+#define ACPI_SIG_DSDT           "DSDT"	/* Differentiated System Description Table */
+#define ACPI_SIG_FADT           "FACP"	/* Fixed ACPI Description Table */
+#define ACPI_SIG_FACS           "FACS"	/* Firmware ACPI Control Structure */
+#define ACPI_SIG_PSDT           "PSDT"	/* Persistent System Description Table */
+#define ACPI_SIG_RSDP           "RSD PTR "	/* Root System Description Pointer */
+#define ACPI_SIG_RSDT           "RSDT"	/* Root System Description Table */
+#define ACPI_SIG_XSDT           "XSDT"	/* Extended  System Description Table */
+#define ACPI_SIG_SSDT           "SSDT"	/* Secondary System Description Table */
+#define ACPI_RSDP_NAME          "RSDP"	/* Short name for RSDP, not signature */
+
+/*
+ * All tables and structures must be byte-packed to match the ACPI
+ * specification, since the tables are provided by the system BIOS
+ */
+#pragma pack(1)
+
+/*
+ * Note about bitfields: The u8 type is used for bitfields in ACPI tables.
+ * This is the only type that is even remotely portable. Anything else is not
+ * portable, so do not use any other bitfield types.
+ */
+
+/*******************************************************************************
+ *
+ * Master ACPI Table Header. This common header is used by all ACPI tables
+ * except the RSDP and FACS.
+ *
+ ******************************************************************************/
+
+struct acpi_table_header {
+	char signature[ACPI_NAME_SIZE];	/* ASCII table signature */
+	u32 length;		/* Length of table in bytes, including this header */
+	u8 revision;		/* ACPI Specification minor version # */
+	u8 checksum;		/* To make sum of entire table == 0 */
+	char oem_id[ACPI_OEM_ID_SIZE];	/* ASCII OEM identification */
+	char oem_table_id[ACPI_OEM_TABLE_ID_SIZE];	/* ASCII OEM table identification */
+	u32 oem_revision;	/* OEM revision number */
+	char asl_compiler_id[ACPI_NAME_SIZE];	/* ASCII ASL compiler vendor ID */
+	u32 asl_compiler_revision;	/* ASL compiler version */
+};
+
+/*******************************************************************************
+ *
+ * GAS - Generic Address Structure (ACPI 2.0+)
+ *
+ * Note: Since this structure is used in the ACPI tables, it is byte aligned.
+ * If misaliged access is not supported by the hardware, accesses to the
+ * 64-bit Address field must be performed with care.
+ *
+ ******************************************************************************/
+
+struct acpi_generic_address {
+	u8 space_id;		/* Address space where struct or register exists */
+	u8 bit_width;		/* Size in bits of given register */
+	u8 bit_offset;		/* Bit offset within the register */
+	u8 access_width;	/* Minimum Access size (ACPI 3.0) */
+	u64 address;		/* 64-bit address of struct or register */
+};
+
+/*******************************************************************************
+ *
+ * RSDP - Root System Description Pointer (Signature is "RSD PTR ")
+ *        Version 2
+ *
+ ******************************************************************************/
+
+struct acpi_table_rsdp {
+	char signature[8];	/* ACPI signature, contains "RSD PTR " */
+	u8 checksum;		/* ACPI 1.0 checksum */
+	char oem_id[ACPI_OEM_ID_SIZE];	/* OEM identification */
+	u8 revision;		/* Must be (0) for ACPI 1.0 or (2) for ACPI 2.0+ */
+	u32 rsdt_physical_address;	/* 32-bit physical address of the RSDT */
+	u32 length;		/* Table length in bytes, including header (ACPI 2.0+) */
+	u64 xsdt_physical_address;	/* 64-bit physical address of the XSDT (ACPI 2.0+) */
+	u8 extended_checksum;	/* Checksum of entire table (ACPI 2.0+) */
+	u8 reserved[3];		/* Reserved, must be zero */
+};
+
+#define ACPI_RSDP_REV0_SIZE     20	/* Size of original ACPI 1.0 RSDP */
+
+/*******************************************************************************
+ *
+ * RSDT/XSDT - Root System Description Tables
+ *             Version 1 (both)
+ *
+ ******************************************************************************/
+
+struct acpi_table_rsdt {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u32 table_offset_entry[1];	/* Array of pointers to ACPI tables */
+};
+
+struct acpi_table_xsdt {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u64 table_offset_entry[1];	/* Array of pointers to ACPI tables */
+};
+
+/*******************************************************************************
+ *
+ * FACS - Firmware ACPI Control Structure (FACS)
+ *
+ ******************************************************************************/
+
+struct acpi_table_facs {
+	char signature[4];	/* ASCII table signature */
+	u32 length;		/* Length of structure, in bytes */
+	u32 hardware_signature;	/* Hardware configuration signature */
+	u32 firmware_waking_vector;	/* 32-bit physical address of the Firmware Waking Vector */
+	u32 global_lock;	/* Global Lock for shared hardware resources */
+	u32 flags;
+	u64 xfirmware_waking_vector;	/* 64-bit version of the Firmware Waking Vector (ACPI 2.0+) */
+	u8 version;		/* Version of this table (ACPI 2.0+) */
+	u8 reserved[3];		/* Reserved, must be zero */
+	u32 ospm_flags;		/* Flags to be set by OSPM (ACPI 4.0) */
+	u8 reserved1[24];	/* Reserved, must be zero */
+};
+
+/* Masks for global_lock flag field above */
+
+#define ACPI_GLOCK_PENDING          (1)	/* 00: Pending global lock ownership */
+#define ACPI_GLOCK_OWNED            (1<<1)	/* 01: Global lock is owned */
+
+/* Masks for Flags field above  */
+
+#define ACPI_FACS_S4_BIOS_PRESENT   (1)	/* 00: S4BIOS support is present */
+#define ACPI_FACS_64BIT_WAKE        (1<<1)	/* 01: 64-bit wake vector supported (ACPI 4.0) */
+
+/* Masks for ospm_flags field above */
+
+#define ACPI_FACS_64BIT_ENVIRONMENT (1)	/* 00: 64-bit wake environment is required (ACPI 4.0) */
+
+/*******************************************************************************
+ *
+ * FADT - Fixed ACPI Description Table (Signature "FACP")
+ *        Version 4
+ *
+ ******************************************************************************/
+
+/* Fields common to all versions of the FADT */
+
+struct acpi_table_fadt {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u32 facs;		/* 32-bit physical address of FACS */
+	u32 dsdt;		/* 32-bit physical address of DSDT */
+	u8 model;		/* System Interrupt Model (ACPI 1.0) - not used in ACPI 2.0+ */
+	u8 preferred_profile;	/* Conveys preferred power management profile to OSPM. */
+	u16 sci_interrupt;	/* System vector of SCI interrupt */
+	u32 smi_command;	/* 32-bit Port address of SMI command port */
+	u8 acpi_enable;		/* Value to write to smi_cmd to enable ACPI */
+	u8 acpi_disable;	/* Value to write to smi_cmd to disable ACPI */
+	u8 S4bios_request;	/* Value to write to SMI CMD to enter S4BIOS state */
+	u8 pstate_control;	/* Processor performance state control */
+	u32 pm1a_event_block;	/* 32-bit Port address of Power Mgt 1a Event Reg Blk */
+	u32 pm1b_event_block;	/* 32-bit Port address of Power Mgt 1b Event Reg Blk */
+	u32 pm1a_control_block;	/* 32-bit Port address of Power Mgt 1a Control Reg Blk */
+	u32 pm1b_control_block;	/* 32-bit Port address of Power Mgt 1b Control Reg Blk */
+	u32 pm2_control_block;	/* 32-bit Port address of Power Mgt 2 Control Reg Blk */
+	u32 pm_timer_block;	/* 32-bit Port address of Power Mgt Timer Ctrl Reg Blk */
+	u32 gpe0_block;		/* 32-bit Port address of General Purpose Event 0 Reg Blk */
+	u32 gpe1_block;		/* 32-bit Port address of General Purpose Event 1 Reg Blk */
+	u8 pm1_event_length;	/* Byte Length of ports at pm1x_event_block */
+	u8 pm1_control_length;	/* Byte Length of ports at pm1x_control_block */
+	u8 pm2_control_length;	/* Byte Length of ports at pm2_control_block */
+	u8 pm_timer_length;	/* Byte Length of ports at pm_timer_block */
+	u8 gpe0_block_length;	/* Byte Length of ports at gpe0_block */
+	u8 gpe1_block_length;	/* Byte Length of ports at gpe1_block */
+	u8 gpe1_base;		/* Offset in GPE number space where GPE1 events start */
+	u8 cst_control;		/* Support for the _CST object and C States change notification */
+	u16 C2latency;		/* Worst case HW latency to enter/exit C2 state */
+	u16 C3latency;		/* Worst case HW latency to enter/exit C3 state */
+	u16 flush_size;		/* Processor's memory cache line width, in bytes */
+	u16 flush_stride;	/* Number of flush strides that need to be read */
+	u8 duty_offset;		/* Processor duty cycle index in processor's P_CNT reg */
+	u8 duty_width;		/* Processor duty cycle value bit width in P_CNT register */
+	u8 day_alarm;		/* Index to day-of-month alarm in RTC CMOS RAM */
+	u8 month_alarm;		/* Index to month-of-year alarm in RTC CMOS RAM */
+	u8 century;		/* Index to century in RTC CMOS RAM */
+	u16 boot_flags;		/* IA-PC Boot Architecture Flags (see below for individual flags) */
+	u8 reserved;		/* Reserved, must be zero */
+	u32 flags;		/* Miscellaneous flag bits (see below for individual flags) */
+	struct acpi_generic_address reset_register;	/* 64-bit address of the Reset register */
+	u8 reset_value;		/* Value to write to the reset_register port to reset the system */
+	u8 reserved4[3];	/* Reserved, must be zero */
+	u64 Xfacs;		/* 64-bit physical address of FACS */
+	u64 Xdsdt;		/* 64-bit physical address of DSDT */
+	struct acpi_generic_address xpm1a_event_block;	/* 64-bit Extended Power Mgt 1a Event Reg Blk address */
+	struct acpi_generic_address xpm1b_event_block;	/* 64-bit Extended Power Mgt 1b Event Reg Blk address */
+	struct acpi_generic_address xpm1a_control_block;	/* 64-bit Extended Power Mgt 1a Control Reg Blk address */
+	struct acpi_generic_address xpm1b_control_block;	/* 64-bit Extended Power Mgt 1b Control Reg Blk address */
+	struct acpi_generic_address xpm2_control_block;	/* 64-bit Extended Power Mgt 2 Control Reg Blk address */
+	struct acpi_generic_address xpm_timer_block;	/* 64-bit Extended Power Mgt Timer Ctrl Reg Blk address */
+	struct acpi_generic_address xgpe0_block;	/* 64-bit Extended General Purpose Event 0 Reg Blk address */
+	struct acpi_generic_address xgpe1_block;	/* 64-bit Extended General Purpose Event 1 Reg Blk address */
+	struct acpi_generic_address sleep_control;	/* 64-bit Sleep Control register */
+	struct acpi_generic_address sleep_status;	/* 64-bit Sleep Status register */
+};
+
+/* Masks for FADT Boot Architecture Flags (boot_flags) */
+
+#define ACPI_FADT_LEGACY_DEVICES    (1)  	/* 00: [V2] System has LPC or ISA bus devices */
+#define ACPI_FADT_8042              (1<<1)	/* 01: [V3] System has an 8042 controller on port 60/64 */
+#define ACPI_FADT_NO_VGA            (1<<2)	/* 02: [V4] It is not safe to probe for VGA hardware */
+#define ACPI_FADT_NO_MSI            (1<<3)	/* 03: [V4] Message Signaled Interrupts (MSI) must not be enabled */
+#define ACPI_FADT_NO_ASPM           (1<<4)	/* 04: [V4] PCIe ASPM control must not be enabled */
+#define ACPI_FADT_NO_CMOS_RTC       (1<<5)	/* 05: [V5] No CMOS real-time clock present */
+
+#define FADT2_REVISION_ID               3
+
+/* Masks for FADT flags */
+
+#define ACPI_FADT_WBINVD            (1)	/* 00: [V1] The wbinvd instruction works properly */
+#define ACPI_FADT_WBINVD_FLUSH      (1<<1)	/* 01: [V1] wbinvd flushes but does not invalidate caches */
+#define ACPI_FADT_C1_SUPPORTED      (1<<2)	/* 02: [V1] All processors support C1 state */
+#define ACPI_FADT_C2_MP_SUPPORTED   (1<<3)	/* 03: [V1] C2 state works on MP system */
+#define ACPI_FADT_POWER_BUTTON      (1<<4)	/* 04: [V1] Power button is handled as a control method device */
+#define ACPI_FADT_SLEEP_BUTTON      (1<<5)	/* 05: [V1] Sleep button is handled as a control method device */
+#define ACPI_FADT_FIXED_RTC         (1<<6)	/* 06: [V1] RTC wakeup status not in fixed register space */
+#define ACPI_FADT_S4_RTC_WAKE       (1<<7)	/* 07: [V1] RTC alarm can wake system from S4 */
+#define ACPI_FADT_32BIT_TIMER       (1<<8)	/* 08: [V1] ACPI timer width is 32-bit (0=24-bit) */
+#define ACPI_FADT_DOCKING_SUPPORTED (1<<9)	/* 09: [V1] Docking supported */
+#define ACPI_FADT_RESET_REGISTER    (1<<10)	/* 10: [V2] System reset via the FADT RESET_REG supported */
+#define ACPI_FADT_SEALED_CASE       (1<<11)	/* 11: [V3] No internal expansion capabilities and case is sealed */
+#define ACPI_FADT_HEADLESS          (1<<12)	/* 12: [V3] No local video capabilities or local input devices */
+#define ACPI_FADT_SLEEP_TYPE        (1<<13)	/* 13: [V3] Must execute native instruction after writing  SLP_TYPx register */
+#define ACPI_FADT_PCI_EXPRESS_WAKE  (1<<14)	/* 14: [V4] System supports PCIEXP_WAKE (STS/EN) bits (ACPI 3.0) */
+#define ACPI_FADT_PLATFORM_CLOCK    (1<<15)	/* 15: [V4] OSPM should use platform-provided timer (ACPI 3.0) */
+#define ACPI_FADT_S4_RTC_VALID      (1<<16)	/* 16: [V4] Contents of RTC_STS valid after S4 wake (ACPI 3.0) */
+#define ACPI_FADT_REMOTE_POWER_ON   (1<<17)	/* 17: [V4] System is compatible with remote power on (ACPI 3.0) */
+#define ACPI_FADT_APIC_CLUSTER      (1<<18)	/* 18: [V4] All local APICs must use cluster model (ACPI 3.0) */
+#define ACPI_FADT_APIC_PHYSICAL     (1<<19)	/* 19: [V4] All local x_aPICs must use physical dest mode (ACPI 3.0) */
+#define ACPI_FADT_HW_REDUCED        (1<<20)	/* 20: [V5] ACPI hardware is not implemented (ACPI 5.0) */
+#define ACPI_FADT_LOW_POWER_S0      (1<<21)	/* 21: [V5] S0 power savings are equal or better than S3 (ACPI 5.0) */
+
+/* Values for preferred_profile (Preferred Power Management Profiles) */
+
+enum acpi_prefered_pm_profiles {
+	PM_UNSPECIFIED = 0,
+	PM_DESKTOP = 1,
+	PM_MOBILE = 2,
+	PM_WORKSTATION = 3,
+	PM_ENTERPRISE_SERVER = 4,
+	PM_SOHO_SERVER = 5,
+	PM_APPLIANCE_PC = 6,
+	PM_PERFORMANCE_SERVER = 7,
+	PM_TABLET = 8
+};
+
+/* Values for sleep_status and sleep_control registers (V5 FADT) */
+
+#define ACPI_X_WAKE_STATUS          0x80
+#define ACPI_X_SLEEP_TYPE_MASK      0x1C
+#define ACPI_X_SLEEP_TYPE_POSITION  0x02
+#define ACPI_X_SLEEP_ENABLE         0x20
+
+/* Reset to default packing */
+
+#pragma pack()
+
+#define ACPI_FADT_OFFSET(f)             (u16) ACPI_OFFSET (struct acpi_table_fadt, f)
+
+/*
+ * Internal table-related structures
+ */
+union acpi_name_union {
+	u32 integer;
+	char ascii[4];
+};
+
+/* Internal ACPI Table Descriptor. One per ACPI table. */
+
+struct acpi_table_desc {
+	acpi_physical_address address;
+	struct acpi_table_header *pointer;
+	u32 length;		/* Length fixed at 32 bits */
+	union acpi_name_union signature;
+	acpi_owner_id owner_id;
+	u8 flags;
+};
+
+/* Masks for Flags field above */
+
+#define ACPI_TABLE_ORIGIN_UNKNOWN       (0)
+#define ACPI_TABLE_ORIGIN_MAPPED        (1)
+#define ACPI_TABLE_ORIGIN_ALLOCATED     (2)
+#define ACPI_TABLE_ORIGIN_OVERRIDE      (4)
+#define ACPI_TABLE_ORIGIN_MASK          (7)
+#define ACPI_TABLE_IS_LOADED            (8)
+
+/*
+ * Get the remaining ACPI tables
+ */
+
+#include <acpi/actbl1.h>
+#include <acpi/actbl2.h>
+#include <acpi/actbl3.h>
+
+/*
+ * Sizes of the various flavors of FADT. We need to look closely
+ * at the FADT length because the version number essentially tells
+ * us nothing because of many BIOS bugs where the version does not
+ * match the expected length. In other words, the length of the
+ * FADT is the bottom line as to what the version really is.
+ *
+ * For reference, the values below are as follows:
+ *     FADT V1  size: 0x074
+ *     FADT V2  size: 0x084
+ *     FADT V3  size: 0x0F4
+ *     FADT V4  size: 0x0F4
+ *     FADT V5  size: 0x10C
+ */
+#define ACPI_FADT_V1_SIZE       (u32) (ACPI_FADT_OFFSET (flags) + 4)
+#define ACPI_FADT_V2_SIZE       (u32) (ACPI_FADT_OFFSET (reserved4[0]) + 3)
+#define ACPI_FADT_V3_SIZE       (u32) (ACPI_FADT_OFFSET (sleep_control))
+#define ACPI_FADT_V5_SIZE       (u32) (sizeof (struct acpi_table_fadt))
+
+#endif				/* __ACTBL_H__ */
diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h
new file mode 100644
index 00000000..71e747be
--- /dev/null
+++ b/include/acpi/actbl1.h
@@ -0,0 +1,963 @@
+/******************************************************************************
+ *
+ * Name: actbl1.h - Additional ACPI table definitions
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2011, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACTBL1_H__
+#define __ACTBL1_H__
+
+/*******************************************************************************
+ *
+ * Additional ACPI Tables (1)
+ *
+ * These tables are not consumed directly by the ACPICA subsystem, but are
+ * included here to support device drivers and the AML disassembler.
+ *
+ * The tables in this file are fully defined within the ACPI specification.
+ *
+ ******************************************************************************/
+
+/*
+ * Values for description table header signatures for tables defined in this
+ * file. Useful because they make it more difficult to inadvertently type in
+ * the wrong signature.
+ */
+#define ACPI_SIG_BERT           "BERT"	/* Boot Error Record Table */
+#define ACPI_SIG_CPEP           "CPEP"	/* Corrected Platform Error Polling table */
+#define ACPI_SIG_ECDT           "ECDT"	/* Embedded Controller Boot Resources Table */
+#define ACPI_SIG_EINJ           "EINJ"	/* Error Injection table */
+#define ACPI_SIG_ERST           "ERST"	/* Error Record Serialization Table */
+#define ACPI_SIG_HEST           "HEST"	/* Hardware Error Source Table */
+#define ACPI_SIG_MADT           "APIC"	/* Multiple APIC Description Table */
+#define ACPI_SIG_MSCT           "MSCT"	/* Maximum System Characteristics Table */
+#define ACPI_SIG_SBST           "SBST"	/* Smart Battery Specification Table */
+#define ACPI_SIG_SLIT           "SLIT"	/* System Locality Distance Information Table */
+#define ACPI_SIG_SRAT           "SRAT"	/* System Resource Affinity Table */
+
+/*
+ * All tables must be byte-packed to match the ACPI specification, since
+ * the tables are provided by the system BIOS.
+ */
+#pragma pack(1)
+
+/*
+ * Note about bitfields: The u8 type is used for bitfields in ACPI tables.
+ * This is the only type that is even remotely portable. Anything else is not
+ * portable, so do not use any other bitfield types.
+ */
+
+/*******************************************************************************
+ *
+ * Common subtable headers
+ *
+ ******************************************************************************/
+
+/* Generic subtable header (used in MADT, SRAT, etc.) */
+
+struct acpi_subtable_header {
+	u8 type;
+	u8 length;
+};
+
+/* Subtable header for WHEA tables (EINJ, ERST, WDAT) */
+
+struct acpi_whea_header {
+	u8 action;
+	u8 instruction;
+	u8 flags;
+	u8 reserved;
+	struct acpi_generic_address register_region;
+	u64 value;		/* Value used with Read/Write register */
+	u64 mask;		/* Bitmask required for this register instruction */
+};
+
+/*******************************************************************************
+ *
+ * BERT - Boot Error Record Table (ACPI 4.0)
+ *        Version 1
+ *
+ ******************************************************************************/
+
+struct acpi_table_bert {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u32 region_length;	/* Length of the boot error region */
+	u64 address;		/* Physical address of the error region */
+};
+
+/* Boot Error Region (not a subtable, pointed to by Address field above) */
+
+struct acpi_bert_region {
+	u32 block_status;	/* Type of error information */
+	u32 raw_data_offset;	/* Offset to raw error data */
+	u32 raw_data_length;	/* Length of raw error data */
+	u32 data_length;	/* Length of generic error data */
+	u32 error_severity;	/* Severity code */
+};
+
+/* Values for block_status flags above */
+
+#define ACPI_BERT_UNCORRECTABLE             (1)
+#define ACPI_BERT_CORRECTABLE               (1<<1)
+#define ACPI_BERT_MULTIPLE_UNCORRECTABLE    (1<<2)
+#define ACPI_BERT_MULTIPLE_CORRECTABLE      (1<<3)
+#define ACPI_BERT_ERROR_ENTRY_COUNT         (0xFF<<4)	/* 8 bits, error count */
+
+/* Values for error_severity above */
+
+enum acpi_bert_error_severity {
+	ACPI_BERT_ERROR_CORRECTABLE = 0,
+	ACPI_BERT_ERROR_FATAL = 1,
+	ACPI_BERT_ERROR_CORRECTED = 2,
+	ACPI_BERT_ERROR_NONE = 3,
+	ACPI_BERT_ERROR_RESERVED = 4	/* 4 and greater are reserved */
+};
+
+/*
+ * Note: The generic error data that follows the error_severity field above
+ * uses the struct acpi_hest_generic_data defined under the HEST table below
+ */
+
+/*******************************************************************************
+ *
+ * CPEP - Corrected Platform Error Polling table (ACPI 4.0)
+ *        Version 1
+ *
+ ******************************************************************************/
+
+struct acpi_table_cpep {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u64 reserved;
+};
+
+/* Subtable */
+
+struct acpi_cpep_polling {
+	struct acpi_subtable_header header;
+	u8 id;			/* Processor ID */
+	u8 eid;			/* Processor EID */
+	u32 interval;		/* Polling interval (msec) */
+};
+
+/*******************************************************************************
+ *
+ * ECDT - Embedded Controller Boot Resources Table
+ *        Version 1
+ *
+ ******************************************************************************/
+
+struct acpi_table_ecdt {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	struct acpi_generic_address control;	/* Address of EC command/status register */
+	struct acpi_generic_address data;	/* Address of EC data register */
+	u32 uid;		/* Unique ID - must be same as the EC _UID method */
+	u8 gpe;			/* The GPE for the EC */
+	u8 id[1];		/* Full namepath of the EC in the ACPI namespace */
+};
+
+/*******************************************************************************
+ *
+ * EINJ - Error Injection Table (ACPI 4.0)
+ *        Version 1
+ *
+ ******************************************************************************/
+
+struct acpi_table_einj {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u32 header_length;
+	u8 flags;
+	u8 reserved[3];
+	u32 entries;
+};
+
+/* EINJ Injection Instruction Entries (actions) */
+
+struct acpi_einj_entry {
+	struct acpi_whea_header whea_header;	/* Common header for WHEA tables */
+};
+
+/* Masks for Flags field above */
+
+#define ACPI_EINJ_PRESERVE          (1)
+
+/* Values for Action field above */
+
+enum acpi_einj_actions {
+	ACPI_EINJ_BEGIN_OPERATION = 0,
+	ACPI_EINJ_GET_TRIGGER_TABLE = 1,
+	ACPI_EINJ_SET_ERROR_TYPE = 2,
+	ACPI_EINJ_GET_ERROR_TYPE = 3,
+	ACPI_EINJ_END_OPERATION = 4,
+	ACPI_EINJ_EXECUTE_OPERATION = 5,
+	ACPI_EINJ_CHECK_BUSY_STATUS = 6,
+	ACPI_EINJ_GET_COMMAND_STATUS = 7,
+	ACPI_EINJ_SET_ERROR_TYPE_WITH_ADDRESS = 8,
+	ACPI_EINJ_ACTION_RESERVED = 9,	/* 9 and greater are reserved */
+	ACPI_EINJ_TRIGGER_ERROR = 0xFF	/* Except for this value */
+};
+
+/* Values for Instruction field above */
+
+enum acpi_einj_instructions {
+	ACPI_EINJ_READ_REGISTER = 0,
+	ACPI_EINJ_READ_REGISTER_VALUE = 1,
+	ACPI_EINJ_WRITE_REGISTER = 2,
+	ACPI_EINJ_WRITE_REGISTER_VALUE = 3,
+	ACPI_EINJ_NOOP = 4,
+	ACPI_EINJ_FLUSH_CACHELINE = 5,
+	ACPI_EINJ_INSTRUCTION_RESERVED = 6	/* 6 and greater are reserved */
+};
+
+struct acpi_einj_error_type_with_addr {
+	u32 error_type;
+	u32 vendor_struct_offset;
+	u32 flags;
+	u32 apic_id;
+	u64 address;
+	u64 range;
+	u32 pcie_id;
+};
+
+struct acpi_einj_vendor {
+	u32 length;
+	u32 pcie_id;
+	u16 vendor_id;
+	u16 device_id;
+	u8 revision_id;
+	u8 reserved[3];
+};
+
+/* EINJ Trigger Error Action Table */
+
+struct acpi_einj_trigger {
+	u32 header_size;
+	u32 revision;
+	u32 table_size;
+	u32 entry_count;
+};
+
+/* Command status return values */
+
+enum acpi_einj_command_status {
+	ACPI_EINJ_SUCCESS = 0,
+	ACPI_EINJ_FAILURE = 1,
+	ACPI_EINJ_INVALID_ACCESS = 2,
+	ACPI_EINJ_STATUS_RESERVED = 3	/* 3 and greater are reserved */
+};
+
+/* Error types returned from ACPI_EINJ_GET_ERROR_TYPE (bitfield) */
+
+#define ACPI_EINJ_PROCESSOR_CORRECTABLE     (1)
+#define ACPI_EINJ_PROCESSOR_UNCORRECTABLE   (1<<1)
+#define ACPI_EINJ_PROCESSOR_FATAL           (1<<2)
+#define ACPI_EINJ_MEMORY_CORRECTABLE        (1<<3)
+#define ACPI_EINJ_MEMORY_UNCORRECTABLE      (1<<4)
+#define ACPI_EINJ_MEMORY_FATAL              (1<<5)
+#define ACPI_EINJ_PCIX_CORRECTABLE          (1<<6)
+#define ACPI_EINJ_PCIX_UNCORRECTABLE        (1<<7)
+#define ACPI_EINJ_PCIX_FATAL                (1<<8)
+#define ACPI_EINJ_PLATFORM_CORRECTABLE      (1<<9)
+#define ACPI_EINJ_PLATFORM_UNCORRECTABLE    (1<<10)
+#define ACPI_EINJ_PLATFORM_FATAL            (1<<11)
+#define ACPI_EINJ_VENDOR_DEFINED            (1<<31)
+
+/*******************************************************************************
+ *
+ * ERST - Error Record Serialization Table (ACPI 4.0)
+ *        Version 1
+ *
+ ******************************************************************************/
+
+struct acpi_table_erst {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u32 header_length;
+	u32 reserved;
+	u32 entries;
+};
+
+/* ERST Serialization Entries (actions) */
+
+struct acpi_erst_entry {
+	struct acpi_whea_header whea_header;	/* Common header for WHEA tables */
+};
+
+/* Masks for Flags field above */
+
+#define ACPI_ERST_PRESERVE          (1)
+
+/* Values for Action field above */
+
+enum acpi_erst_actions {
+	ACPI_ERST_BEGIN_WRITE = 0,
+	ACPI_ERST_BEGIN_READ = 1,
+	ACPI_ERST_BEGIN_CLEAR = 2,
+	ACPI_ERST_END = 3,
+	ACPI_ERST_SET_RECORD_OFFSET = 4,
+	ACPI_ERST_EXECUTE_OPERATION = 5,
+	ACPI_ERST_CHECK_BUSY_STATUS = 6,
+	ACPI_ERST_GET_COMMAND_STATUS = 7,
+	ACPI_ERST_GET_RECORD_ID = 8,
+	ACPI_ERST_SET_RECORD_ID = 9,
+	ACPI_ERST_GET_RECORD_COUNT = 10,
+	ACPI_ERST_BEGIN_DUMMY_WRIITE = 11,
+	ACPI_ERST_NOT_USED = 12,
+	ACPI_ERST_GET_ERROR_RANGE = 13,
+	ACPI_ERST_GET_ERROR_LENGTH = 14,
+	ACPI_ERST_GET_ERROR_ATTRIBUTES = 15,
+	ACPI_ERST_ACTION_RESERVED = 16	/* 16 and greater are reserved */
+};
+
+/* Values for Instruction field above */
+
+enum acpi_erst_instructions {
+	ACPI_ERST_READ_REGISTER = 0,
+	ACPI_ERST_READ_REGISTER_VALUE = 1,
+	ACPI_ERST_WRITE_REGISTER = 2,
+	ACPI_ERST_WRITE_REGISTER_VALUE = 3,
+	ACPI_ERST_NOOP = 4,
+	ACPI_ERST_LOAD_VAR1 = 5,
+	ACPI_ERST_LOAD_VAR2 = 6,
+	ACPI_ERST_STORE_VAR1 = 7,
+	ACPI_ERST_ADD = 8,
+	ACPI_ERST_SUBTRACT = 9,
+	ACPI_ERST_ADD_VALUE = 10,
+	ACPI_ERST_SUBTRACT_VALUE = 11,
+	ACPI_ERST_STALL = 12,
+	ACPI_ERST_STALL_WHILE_TRUE = 13,
+	ACPI_ERST_SKIP_NEXT_IF_TRUE = 14,
+	ACPI_ERST_GOTO = 15,
+	ACPI_ERST_SET_SRC_ADDRESS_BASE = 16,
+	ACPI_ERST_SET_DST_ADDRESS_BASE = 17,
+	ACPI_ERST_MOVE_DATA = 18,
+	ACPI_ERST_INSTRUCTION_RESERVED = 19	/* 19 and greater are reserved */
+};
+
+/* Command status return values */
+
+enum acpi_erst_command_status {
+	ACPI_ERST_SUCESS = 0,
+	ACPI_ERST_NO_SPACE = 1,
+	ACPI_ERST_NOT_AVAILABLE = 2,
+	ACPI_ERST_FAILURE = 3,
+	ACPI_ERST_RECORD_EMPTY = 4,
+	ACPI_ERST_NOT_FOUND = 5,
+	ACPI_ERST_STATUS_RESERVED = 6	/* 6 and greater are reserved */
+};
+
+/* Error Record Serialization Information */
+
+struct acpi_erst_info {
+	u16 signature;		/* Should be "ER" */
+	u8 data[48];
+};
+
+/*******************************************************************************
+ *
+ * HEST - Hardware Error Source Table (ACPI 4.0)
+ *        Version 1
+ *
+ ******************************************************************************/
+
+struct acpi_table_hest {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u32 error_source_count;
+};
+
+/* HEST subtable header */
+
+struct acpi_hest_header {
+	u16 type;
+	u16 source_id;
+};
+
+/* Values for Type field above for subtables */
+
+enum acpi_hest_types {
+	ACPI_HEST_TYPE_IA32_CHECK = 0,
+	ACPI_HEST_TYPE_IA32_CORRECTED_CHECK = 1,
+	ACPI_HEST_TYPE_IA32_NMI = 2,
+	ACPI_HEST_TYPE_NOT_USED3 = 3,
+	ACPI_HEST_TYPE_NOT_USED4 = 4,
+	ACPI_HEST_TYPE_NOT_USED5 = 5,
+	ACPI_HEST_TYPE_AER_ROOT_PORT = 6,
+	ACPI_HEST_TYPE_AER_ENDPOINT = 7,
+	ACPI_HEST_TYPE_AER_BRIDGE = 8,
+	ACPI_HEST_TYPE_GENERIC_ERROR = 9,
+	ACPI_HEST_TYPE_RESERVED = 10	/* 10 and greater are reserved */
+};
+
+/*
+ * HEST substructures contained in subtables
+ */
+
+/*
+ * IA32 Error Bank(s) - Follows the struct acpi_hest_ia_machine_check and
+ * struct acpi_hest_ia_corrected structures.
+ */
+struct acpi_hest_ia_error_bank {
+	u8 bank_number;
+	u8 clear_status_on_init;
+	u8 status_format;
+	u8 reserved;
+	u32 control_register;
+	u64 control_data;
+	u32 status_register;
+	u32 address_register;
+	u32 misc_register;
+};
+
+/* Common HEST sub-structure for PCI/AER structures below (6,7,8) */
+
+struct acpi_hest_aer_common {
+	u16 reserved1;
+	u8 flags;
+	u8 enabled;
+	u32 records_to_preallocate;
+	u32 max_sections_per_record;
+	u32 bus;
+	u16 device;
+	u16 function;
+	u16 device_control;
+	u16 reserved2;
+	u32 uncorrectable_mask;
+	u32 uncorrectable_severity;
+	u32 correctable_mask;
+	u32 advanced_capabilities;
+};
+
+/* Masks for HEST Flags fields */
+
+#define ACPI_HEST_FIRMWARE_FIRST        (1)
+#define ACPI_HEST_GLOBAL                (1<<1)
+
+/* Hardware Error Notification */
+
+struct acpi_hest_notify {
+	u8 type;
+	u8 length;
+	u16 config_write_enable;
+	u32 poll_interval;
+	u32 vector;
+	u32 polling_threshold_value;
+	u32 polling_threshold_window;
+	u32 error_threshold_value;
+	u32 error_threshold_window;
+};
+
+/* Values for Notify Type field above */
+
+enum acpi_hest_notify_types {
+	ACPI_HEST_NOTIFY_POLLED = 0,
+	ACPI_HEST_NOTIFY_EXTERNAL = 1,
+	ACPI_HEST_NOTIFY_LOCAL = 2,
+	ACPI_HEST_NOTIFY_SCI = 3,
+	ACPI_HEST_NOTIFY_NMI = 4,
+	ACPI_HEST_NOTIFY_RESERVED = 5	/* 5 and greater are reserved */
+};
+
+/* Values for config_write_enable bitfield above */
+
+#define ACPI_HEST_TYPE                  (1)
+#define ACPI_HEST_POLL_INTERVAL         (1<<1)
+#define ACPI_HEST_POLL_THRESHOLD_VALUE  (1<<2)
+#define ACPI_HEST_POLL_THRESHOLD_WINDOW (1<<3)
+#define ACPI_HEST_ERR_THRESHOLD_VALUE   (1<<4)
+#define ACPI_HEST_ERR_THRESHOLD_WINDOW  (1<<5)
+
+/*
+ * HEST subtables
+ */
+
+/* 0: IA32 Machine Check Exception */
+
+struct acpi_hest_ia_machine_check {
+	struct acpi_hest_header header;
+	u16 reserved1;
+	u8 flags;
+	u8 enabled;
+	u32 records_to_preallocate;
+	u32 max_sections_per_record;
+	u64 global_capability_data;
+	u64 global_control_data;
+	u8 num_hardware_banks;
+	u8 reserved3[7];
+};
+
+/* 1: IA32 Corrected Machine Check */
+
+struct acpi_hest_ia_corrected {
+	struct acpi_hest_header header;
+	u16 reserved1;
+	u8 flags;
+	u8 enabled;
+	u32 records_to_preallocate;
+	u32 max_sections_per_record;
+	struct acpi_hest_notify notify;
+	u8 num_hardware_banks;
+	u8 reserved2[3];
+};
+
+/* 2: IA32 Non-Maskable Interrupt */
+
+struct acpi_hest_ia_nmi {
+	struct acpi_hest_header header;
+	u32 reserved;
+	u32 records_to_preallocate;
+	u32 max_sections_per_record;
+	u32 max_raw_data_length;
+};
+
+/* 3,4,5: Not used */
+
+/* 6: PCI Express Root Port AER */
+
+struct acpi_hest_aer_root {
+	struct acpi_hest_header header;
+	struct acpi_hest_aer_common aer;
+	u32 root_error_command;
+};
+
+/* 7: PCI Express AER (AER Endpoint) */
+
+struct acpi_hest_aer {
+	struct acpi_hest_header header;
+	struct acpi_hest_aer_common aer;
+};
+
+/* 8: PCI Express/PCI-X Bridge AER */
+
+struct acpi_hest_aer_bridge {
+	struct acpi_hest_header header;
+	struct acpi_hest_aer_common aer;
+	u32 uncorrectable_mask2;
+	u32 uncorrectable_severity2;
+	u32 advanced_capabilities2;
+};
+
+/* 9: Generic Hardware Error Source */
+
+struct acpi_hest_generic {
+	struct acpi_hest_header header;
+	u16 related_source_id;
+	u8 reserved;
+	u8 enabled;
+	u32 records_to_preallocate;
+	u32 max_sections_per_record;
+	u32 max_raw_data_length;
+	struct acpi_generic_address error_status_address;
+	struct acpi_hest_notify notify;
+	u32 error_block_length;
+};
+
+/* Generic Error Status block */
+
+struct acpi_hest_generic_status {
+	u32 block_status;
+	u32 raw_data_offset;
+	u32 raw_data_length;
+	u32 data_length;
+	u32 error_severity;
+};
+
+/* Values for block_status flags above */
+
+#define ACPI_HEST_UNCORRECTABLE             (1)
+#define ACPI_HEST_CORRECTABLE               (1<<1)
+#define ACPI_HEST_MULTIPLE_UNCORRECTABLE    (1<<2)
+#define ACPI_HEST_MULTIPLE_CORRECTABLE      (1<<3)
+#define ACPI_HEST_ERROR_ENTRY_COUNT         (0xFF<<4)	/* 8 bits, error count */
+
+/* Generic Error Data entry */
+
+struct acpi_hest_generic_data {
+	u8 section_type[16];
+	u32 error_severity;
+	u16 revision;
+	u8 validation_bits;
+	u8 flags;
+	u32 error_data_length;
+	u8 fru_id[16];
+	u8 fru_text[20];
+};
+
+/*******************************************************************************
+ *
+ * MADT - Multiple APIC Description Table
+ *        Version 3
+ *
+ ******************************************************************************/
+
+struct acpi_table_madt {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u32 address;		/* Physical address of local APIC */
+	u32 flags;
+};
+
+/* Masks for Flags field above */
+
+#define ACPI_MADT_PCAT_COMPAT       (1)	/* 00: System also has dual 8259s */
+
+/* Values for PCATCompat flag */
+
+#define ACPI_MADT_DUAL_PIC          0
+#define ACPI_MADT_MULTIPLE_APIC     1
+
+/* Values for MADT subtable type in struct acpi_subtable_header */
+
+enum acpi_madt_type {
+	ACPI_MADT_TYPE_LOCAL_APIC = 0,
+	ACPI_MADT_TYPE_IO_APIC = 1,
+	ACPI_MADT_TYPE_INTERRUPT_OVERRIDE = 2,
+	ACPI_MADT_TYPE_NMI_SOURCE = 3,
+	ACPI_MADT_TYPE_LOCAL_APIC_NMI = 4,
+	ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE = 5,
+	ACPI_MADT_TYPE_IO_SAPIC = 6,
+	ACPI_MADT_TYPE_LOCAL_SAPIC = 7,
+	ACPI_MADT_TYPE_INTERRUPT_SOURCE = 8,
+	ACPI_MADT_TYPE_LOCAL_X2APIC = 9,
+	ACPI_MADT_TYPE_LOCAL_X2APIC_NMI = 10,
+	ACPI_MADT_TYPE_GENERIC_INTERRUPT = 11,
+	ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR = 12,
+	ACPI_MADT_TYPE_RESERVED = 13	/* 13 and greater are reserved */
+};
+
+/*
+ * MADT Sub-tables, correspond to Type in struct acpi_subtable_header
+ */
+
+/* 0: Processor Local APIC */
+
+struct acpi_madt_local_apic {
+	struct acpi_subtable_header header;
+	u8 processor_id;	/* ACPI processor id */
+	u8 id;			/* Processor's local APIC id */
+	u32 lapic_flags;
+};
+
+/* 1: IO APIC */
+
+struct acpi_madt_io_apic {
+	struct acpi_subtable_header header;
+	u8 id;			/* I/O APIC ID */
+	u8 reserved;		/* Reserved - must be zero */
+	u32 address;		/* APIC physical address */
+	u32 global_irq_base;	/* Global system interrupt where INTI lines start */
+};
+
+/* 2: Interrupt Override */
+
+struct acpi_madt_interrupt_override {
+	struct acpi_subtable_header header;
+	u8 bus;			/* 0 - ISA */
+	u8 source_irq;		/* Interrupt source (IRQ) */
+	u32 global_irq;		/* Global system interrupt */
+	u16 inti_flags;
+};
+
+/* 3: NMI Source */
+
+struct acpi_madt_nmi_source {
+	struct acpi_subtable_header header;
+	u16 inti_flags;
+	u32 global_irq;		/* Global system interrupt */
+};
+
+/* 4: Local APIC NMI */
+
+struct acpi_madt_local_apic_nmi {
+	struct acpi_subtable_header header;
+	u8 processor_id;	/* ACPI processor id */
+	u16 inti_flags;
+	u8 lint;		/* LINTn to which NMI is connected */
+};
+
+/* 5: Address Override */
+
+struct acpi_madt_local_apic_override {
+	struct acpi_subtable_header header;
+	u16 reserved;		/* Reserved, must be zero */
+	u64 address;		/* APIC physical address */
+};
+
+/* 6: I/O Sapic */
+
+struct acpi_madt_io_sapic {
+	struct acpi_subtable_header header;
+	u8 id;			/* I/O SAPIC ID */
+	u8 reserved;		/* Reserved, must be zero */
+	u32 global_irq_base;	/* Global interrupt for SAPIC start */
+	u64 address;		/* SAPIC physical address */
+};
+
+/* 7: Local Sapic */
+
+struct acpi_madt_local_sapic {
+	struct acpi_subtable_header header;
+	u8 processor_id;	/* ACPI processor id */
+	u8 id;			/* SAPIC ID */
+	u8 eid;			/* SAPIC EID */
+	u8 reserved[3];		/* Reserved, must be zero */
+	u32 lapic_flags;
+	u32 uid;		/* Numeric UID - ACPI 3.0 */
+	char uid_string[1];	/* String UID  - ACPI 3.0 */
+};
+
+/* 8: Platform Interrupt Source */
+
+struct acpi_madt_interrupt_source {
+	struct acpi_subtable_header header;
+	u16 inti_flags;
+	u8 type;		/* 1=PMI, 2=INIT, 3=corrected */
+	u8 id;			/* Processor ID */
+	u8 eid;			/* Processor EID */
+	u8 io_sapic_vector;	/* Vector value for PMI interrupts */
+	u32 global_irq;		/* Global system interrupt */
+	u32 flags;		/* Interrupt Source Flags */
+};
+
+/* Masks for Flags field above */
+
+#define ACPI_MADT_CPEI_OVERRIDE     (1)
+
+/* 9: Processor Local X2APIC (ACPI 4.0) */
+
+struct acpi_madt_local_x2apic {
+	struct acpi_subtable_header header;
+	u16 reserved;		/* Reserved - must be zero */
+	u32 local_apic_id;	/* Processor x2APIC ID  */
+	u32 lapic_flags;
+	u32 uid;		/* ACPI processor UID */
+};
+
+/* 10: Local X2APIC NMI (ACPI 4.0) */
+
+struct acpi_madt_local_x2apic_nmi {
+	struct acpi_subtable_header header;
+	u16 inti_flags;
+	u32 uid;		/* ACPI processor UID */
+	u8 lint;		/* LINTn to which NMI is connected */
+	u8 reserved[3];
+};
+
+/* 11: Generic Interrupt (ACPI 5.0) */
+
+struct acpi_madt_generic_interrupt {
+	struct acpi_subtable_header header;
+	u16 reserved;		/* Reserved - must be zero */
+	u32 gic_id;
+	u32 uid;
+	u32 flags;
+	u32 parking_version;
+	u32 performance_interrupt;
+	u64 parked_address;
+	u64 base_address;
+};
+
+/* 12: Generic Distributor (ACPI 5.0) */
+
+struct acpi_madt_generic_distributor {
+	struct acpi_subtable_header header;
+	u16 reserved;		/* Reserved - must be zero */
+	u32 gic_id;
+	u64 base_address;
+	u32 global_irq_base;
+	u32 reserved2;		/* Reserved - must be zero */
+};
+
+/*
+ * Common flags fields for MADT subtables
+ */
+
+/* MADT Local APIC flags (lapic_flags) and GIC flags */
+
+#define ACPI_MADT_ENABLED           (1)	/* 00: Processor is usable if set */
+
+/* MADT MPS INTI flags (inti_flags) */
+
+#define ACPI_MADT_POLARITY_MASK     (3)	/* 00-01: Polarity of APIC I/O input signals */
+#define ACPI_MADT_TRIGGER_MASK      (3<<2)	/* 02-03: Trigger mode of APIC input signals */
+
+/* Values for MPS INTI flags */
+
+#define ACPI_MADT_POLARITY_CONFORMS       0
+#define ACPI_MADT_POLARITY_ACTIVE_HIGH    1
+#define ACPI_MADT_POLARITY_RESERVED       2
+#define ACPI_MADT_POLARITY_ACTIVE_LOW     3
+
+#define ACPI_MADT_TRIGGER_CONFORMS        (0)
+#define ACPI_MADT_TRIGGER_EDGE            (1<<2)
+#define ACPI_MADT_TRIGGER_RESERVED        (2<<2)
+#define ACPI_MADT_TRIGGER_LEVEL           (3<<2)
+
+/*******************************************************************************
+ *
+ * MSCT - Maximum System Characteristics Table (ACPI 4.0)
+ *        Version 1
+ *
+ ******************************************************************************/
+
+struct acpi_table_msct {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u32 proximity_offset;	/* Location of proximity info struct(s) */
+	u32 max_proximity_domains;	/* Max number of proximity domains */
+	u32 max_clock_domains;	/* Max number of clock domains */
+	u64 max_address;	/* Max physical address in system */
+};
+
+/* Subtable - Maximum Proximity Domain Information. Version 1 */
+
+struct acpi_msct_proximity {
+	u8 revision;
+	u8 length;
+	u32 range_start;	/* Start of domain range */
+	u32 range_end;		/* End of domain range */
+	u32 processor_capacity;
+	u64 memory_capacity;	/* In bytes */
+};
+
+/*******************************************************************************
+ *
+ * SBST - Smart Battery Specification Table
+ *        Version 1
+ *
+ ******************************************************************************/
+
+struct acpi_table_sbst {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u32 warning_level;
+	u32 low_level;
+	u32 critical_level;
+};
+
+/*******************************************************************************
+ *
+ * SLIT - System Locality Distance Information Table
+ *        Version 1
+ *
+ ******************************************************************************/
+
+struct acpi_table_slit {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u64 locality_count;
+	u8 entry[1];		/* Real size = localities^2 */
+};
+
+/*******************************************************************************
+ *
+ * SRAT - System Resource Affinity Table
+ *        Version 3
+ *
+ ******************************************************************************/
+
+struct acpi_table_srat {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u32 table_revision;	/* Must be value '1' */
+	u64 reserved;		/* Reserved, must be zero */
+};
+
+/* Values for subtable type in struct acpi_subtable_header */
+
+enum acpi_srat_type {
+	ACPI_SRAT_TYPE_CPU_AFFINITY = 0,
+	ACPI_SRAT_TYPE_MEMORY_AFFINITY = 1,
+	ACPI_SRAT_TYPE_X2APIC_CPU_AFFINITY = 2,
+	ACPI_SRAT_TYPE_RESERVED = 3	/* 3 and greater are reserved */
+};
+
+/*
+ * SRAT Sub-tables, correspond to Type in struct acpi_subtable_header
+ */
+
+/* 0: Processor Local APIC/SAPIC Affinity */
+
+struct acpi_srat_cpu_affinity {
+	struct acpi_subtable_header header;
+	u8 proximity_domain_lo;
+	u8 apic_id;
+	u32 flags;
+	u8 local_sapic_eid;
+	u8 proximity_domain_hi[3];
+	u32 reserved;		/* Reserved, must be zero */
+};
+
+/* Flags */
+
+#define ACPI_SRAT_CPU_USE_AFFINITY  (1)	/* 00: Use affinity structure */
+
+/* 1: Memory Affinity */
+
+struct acpi_srat_mem_affinity {
+	struct acpi_subtable_header header;
+	u32 proximity_domain;
+	u16 reserved;		/* Reserved, must be zero */
+	u64 base_address;
+	u64 length;
+       u32 reserved1;
+	u32 flags;
+       u64 reserved2;	       /* Reserved, must be zero */
+};
+
+/* Flags */
+
+#define ACPI_SRAT_MEM_ENABLED       (1)	/* 00: Use affinity structure */
+#define ACPI_SRAT_MEM_HOT_PLUGGABLE (1<<1)	/* 01: Memory region is hot pluggable */
+#define ACPI_SRAT_MEM_NON_VOLATILE  (1<<2)	/* 02: Memory region is non-volatile */
+
+/* 2: Processor Local X2_APIC Affinity (ACPI 4.0) */
+
+struct acpi_srat_x2apic_cpu_affinity {
+	struct acpi_subtable_header header;
+	u16 reserved;		/* Reserved, must be zero */
+	u32 proximity_domain;
+	u32 apic_id;
+	u32 flags;
+	u32 clock_domain;
+	u32 reserved2;
+};
+
+/* Flags for struct acpi_srat_cpu_affinity and struct acpi_srat_x2apic_cpu_affinity */
+
+#define ACPI_SRAT_CPU_ENABLED       (1)	/* 00: Use affinity structure */
+
+/* Reset to default packing */
+
+#pragma pack()
+
+#endif				/* __ACTBL1_H__ */
diff --git a/include/acpi/actbl2.h b/include/acpi/actbl2.h
new file mode 100644
index 00000000..58bdd054
--- /dev/null
+++ b/include/acpi/actbl2.h
@@ -0,0 +1,1048 @@
+/******************************************************************************
+ *
+ * Name: actbl2.h - ACPI Table Definitions (tables not in ACPI spec)
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2011, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACTBL2_H__
+#define __ACTBL2_H__
+
+/*******************************************************************************
+ *
+ * Additional ACPI Tables (2)
+ *
+ * These tables are not consumed directly by the ACPICA subsystem, but are
+ * included here to support device drivers and the AML disassembler.
+ *
+ * The tables in this file are defined by third-party specifications, and are
+ * not defined directly by the ACPI specification itself.
+ *
+ ******************************************************************************/
+
+/*
+ * Values for description table header signatures for tables defined in this
+ * file. Useful because they make it more difficult to inadvertently type in
+ * the wrong signature.
+ */
+#define ACPI_SIG_ASF            "ASF!"	/* Alert Standard Format table */
+#define ACPI_SIG_BOOT           "BOOT"	/* Simple Boot Flag Table */
+#define ACPI_SIG_DBGP           "DBGP"	/* Debug Port table */
+#define ACPI_SIG_DMAR           "DMAR"	/* DMA Remapping table */
+#define ACPI_SIG_HPET           "HPET"	/* High Precision Event Timer table */
+#define ACPI_SIG_IBFT           "IBFT"	/* i_sCSI Boot Firmware Table */
+#define ACPI_SIG_IVRS           "IVRS"	/* I/O Virtualization Reporting Structure */
+#define ACPI_SIG_MCFG           "MCFG"	/* PCI Memory Mapped Configuration table */
+#define ACPI_SIG_MCHI           "MCHI"	/* Management Controller Host Interface table */
+#define ACPI_SIG_SLIC           "SLIC"	/* Software Licensing Description Table */
+#define ACPI_SIG_SPCR           "SPCR"	/* Serial Port Console Redirection table */
+#define ACPI_SIG_SPMI           "SPMI"	/* Server Platform Management Interface table */
+#define ACPI_SIG_TCPA           "TCPA"	/* Trusted Computing Platform Alliance table */
+#define ACPI_SIG_UEFI           "UEFI"	/* Uefi Boot Optimization Table */
+#define ACPI_SIG_WAET           "WAET"	/* Windows ACPI Emulated devices Table */
+#define ACPI_SIG_WDAT           "WDAT"	/* Watchdog Action Table */
+#define ACPI_SIG_WDDT           "WDDT"	/* Watchdog Timer Description Table */
+#define ACPI_SIG_WDRT           "WDRT"	/* Watchdog Resource Table */
+
+#ifdef ACPI_UNDEFINED_TABLES
+/*
+ * These tables have been seen in the field, but no definition has been found
+ */
+#define ACPI_SIG_ATKG           "ATKG"
+#define ACPI_SIG_GSCI           "GSCI"	/* GMCH SCI table */
+#define ACPI_SIG_IEIT           "IEIT"
+#endif
+
+/*
+ * All tables must be byte-packed to match the ACPI specification, since
+ * the tables are provided by the system BIOS.
+ */
+#pragma pack(1)
+
+/*
+ * Note about bitfields: The u8 type is used for bitfields in ACPI tables.
+ * This is the only type that is even remotely portable. Anything else is not
+ * portable, so do not use any other bitfield types.
+ */
+
+/*******************************************************************************
+ *
+ * ASF - Alert Standard Format table (Signature "ASF!")
+ *       Revision 0x10
+ *
+ * Conforms to the Alert Standard Format Specification V2.0, 23 April 2003
+ *
+ ******************************************************************************/
+
+struct acpi_table_asf {
+	struct acpi_table_header header;	/* Common ACPI table header */
+};
+
+/* ASF subtable header */
+
+struct acpi_asf_header {
+	u8 type;
+	u8 reserved;
+	u16 length;
+};
+
+/* Values for Type field above */
+
+enum acpi_asf_type {
+	ACPI_ASF_TYPE_INFO = 0,
+	ACPI_ASF_TYPE_ALERT = 1,
+	ACPI_ASF_TYPE_CONTROL = 2,
+	ACPI_ASF_TYPE_BOOT = 3,
+	ACPI_ASF_TYPE_ADDRESS = 4,
+	ACPI_ASF_TYPE_RESERVED = 5
+};
+
+/*
+ * ASF subtables
+ */
+
+/* 0: ASF Information */
+
+struct acpi_asf_info {
+	struct acpi_asf_header header;
+	u8 min_reset_value;
+	u8 min_poll_interval;
+	u16 system_id;
+	u32 mfg_id;
+	u8 flags;
+	u8 reserved2[3];
+};
+
+/* Masks for Flags field above */
+
+#define ACPI_ASF_SMBUS_PROTOCOLS    (1)
+
+/* 1: ASF Alerts */
+
+struct acpi_asf_alert {
+	struct acpi_asf_header header;
+	u8 assert_mask;
+	u8 deassert_mask;
+	u8 alerts;
+	u8 data_length;
+};
+
+struct acpi_asf_alert_data {
+	u8 address;
+	u8 command;
+	u8 mask;
+	u8 value;
+	u8 sensor_type;
+	u8 type;
+	u8 offset;
+	u8 source_type;
+	u8 severity;
+	u8 sensor_number;
+	u8 entity;
+	u8 instance;
+};
+
+/* 2: ASF Remote Control */
+
+struct acpi_asf_remote {
+	struct acpi_asf_header header;
+	u8 controls;
+	u8 data_length;
+	u16 reserved2;
+};
+
+struct acpi_asf_control_data {
+	u8 function;
+	u8 address;
+	u8 command;
+	u8 value;
+};
+
+/* 3: ASF RMCP Boot Options */
+
+struct acpi_asf_rmcp {
+	struct acpi_asf_header header;
+	u8 capabilities[7];
+	u8 completion_code;
+	u32 enterprise_id;
+	u8 command;
+	u16 parameter;
+	u16 boot_options;
+	u16 oem_parameters;
+};
+
+/* 4: ASF Address */
+
+struct acpi_asf_address {
+	struct acpi_asf_header header;
+	u8 eprom_address;
+	u8 devices;
+};
+
+/*******************************************************************************
+ *
+ * BOOT - Simple Boot Flag Table
+ *        Version 1
+ *
+ * Conforms to the "Simple Boot Flag Specification", Version 2.1
+ *
+ ******************************************************************************/
+
+struct acpi_table_boot {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u8 cmos_index;		/* Index in CMOS RAM for the boot register */
+	u8 reserved[3];
+};
+
+/*******************************************************************************
+ *
+ * DBGP - Debug Port table
+ *        Version 1
+ *
+ * Conforms to the "Debug Port Specification", Version 1.00, 2/9/2000
+ *
+ ******************************************************************************/
+
+struct acpi_table_dbgp {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u8 type;		/* 0=full 16550, 1=subset of 16550 */
+	u8 reserved[3];
+	struct acpi_generic_address debug_port;
+};
+
+/*******************************************************************************
+ *
+ * DMAR - DMA Remapping table
+ *        Version 1
+ *
+ * Conforms to "Intel Virtualization Technology for Directed I/O",
+ * Version 1.2, Sept. 2008
+ *
+ ******************************************************************************/
+
+struct acpi_table_dmar {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u8 width;		/* Host Address Width */
+	u8 flags;
+	u8 reserved[10];
+};
+
+/* Masks for Flags field above */
+
+#define ACPI_DMAR_INTR_REMAP        (1)
+
+/* DMAR subtable header */
+
+struct acpi_dmar_header {
+	u16 type;
+	u16 length;
+};
+
+/* Values for subtable type in struct acpi_dmar_header */
+
+enum acpi_dmar_type {
+	ACPI_DMAR_TYPE_HARDWARE_UNIT = 0,
+	ACPI_DMAR_TYPE_RESERVED_MEMORY = 1,
+	ACPI_DMAR_TYPE_ATSR = 2,
+	ACPI_DMAR_HARDWARE_AFFINITY = 3,
+	ACPI_DMAR_TYPE_RESERVED = 4	/* 4 and greater are reserved */
+};
+
+/* DMAR Device Scope structure */
+
+struct acpi_dmar_device_scope {
+	u8 entry_type;
+	u8 length;
+	u16 reserved;
+	u8 enumeration_id;
+	u8 bus;
+};
+
+/* Values for entry_type in struct acpi_dmar_device_scope */
+
+enum acpi_dmar_scope_type {
+	ACPI_DMAR_SCOPE_TYPE_NOT_USED = 0,
+	ACPI_DMAR_SCOPE_TYPE_ENDPOINT = 1,
+	ACPI_DMAR_SCOPE_TYPE_BRIDGE = 2,
+	ACPI_DMAR_SCOPE_TYPE_IOAPIC = 3,
+	ACPI_DMAR_SCOPE_TYPE_HPET = 4,
+	ACPI_DMAR_SCOPE_TYPE_RESERVED = 5	/* 5 and greater are reserved */
+};
+
+struct acpi_dmar_pci_path {
+	u8 dev;
+	u8 fn;
+};
+
+/*
+ * DMAR Sub-tables, correspond to Type in struct acpi_dmar_header
+ */
+
+/* 0: Hardware Unit Definition */
+
+struct acpi_dmar_hardware_unit {
+	struct acpi_dmar_header header;
+	u8 flags;
+	u8 reserved;
+	u16 segment;
+	u64 address;		/* Register Base Address */
+};
+
+/* Masks for Flags field above */
+
+#define ACPI_DMAR_INCLUDE_ALL       (1)
+
+/* 1: Reserved Memory Defininition */
+
+struct acpi_dmar_reserved_memory {
+	struct acpi_dmar_header header;
+	u16 reserved;
+	u16 segment;
+	u64 base_address;	/* 4_k aligned base address */
+	u64 end_address;	/* 4_k aligned limit address */
+};
+
+/* Masks for Flags field above */
+
+#define ACPI_DMAR_ALLOW_ALL         (1)
+
+/* 2: Root Port ATS Capability Reporting Structure */
+
+struct acpi_dmar_atsr {
+	struct acpi_dmar_header header;
+	u8 flags;
+	u8 reserved;
+	u16 segment;
+};
+
+/* Masks for Flags field above */
+
+#define ACPI_DMAR_ALL_PORTS         (1)
+
+/* 3: Remapping Hardware Static Affinity Structure */
+
+struct acpi_dmar_rhsa {
+	struct acpi_dmar_header header;
+	u32 reserved;
+	u64 base_address;
+	u32 proximity_domain;
+};
+
+/*******************************************************************************
+ *
+ * HPET - High Precision Event Timer table
+ *        Version 1
+ *
+ * Conforms to "IA-PC HPET (High Precision Event Timers) Specification",
+ * Version 1.0a, October 2004
+ *
+ ******************************************************************************/
+
+struct acpi_table_hpet {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u32 id;			/* Hardware ID of event timer block */
+	struct acpi_generic_address address;	/* Address of event timer block */
+	u8 sequence;		/* HPET sequence number */
+	u16 minimum_tick;	/* Main counter min tick, periodic mode */
+	u8 flags;
+};
+
+/* Masks for Flags field above */
+
+#define ACPI_HPET_PAGE_PROTECT_MASK (3)
+
+/* Values for Page Protect flags */
+
+enum acpi_hpet_page_protect {
+	ACPI_HPET_NO_PAGE_PROTECT = 0,
+	ACPI_HPET_PAGE_PROTECT4 = 1,
+	ACPI_HPET_PAGE_PROTECT64 = 2
+};
+
+/*******************************************************************************
+ *
+ * IBFT - Boot Firmware Table
+ *        Version 1
+ *
+ * Conforms to "iSCSI Boot Firmware Table (iBFT) as Defined in ACPI 3.0b
+ * Specification", Version 1.01, March 1, 2007
+ *
+ * Note: It appears that this table is not intended to appear in the RSDT/XSDT.
+ * Therefore, it is not currently supported by the disassembler.
+ *
+ ******************************************************************************/
+
+struct acpi_table_ibft {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u8 reserved[12];
+};
+
+/* IBFT common subtable header */
+
+struct acpi_ibft_header {
+	u8 type;
+	u8 version;
+	u16 length;
+	u8 index;
+	u8 flags;
+};
+
+/* Values for Type field above */
+
+enum acpi_ibft_type {
+	ACPI_IBFT_TYPE_NOT_USED = 0,
+	ACPI_IBFT_TYPE_CONTROL = 1,
+	ACPI_IBFT_TYPE_INITIATOR = 2,
+	ACPI_IBFT_TYPE_NIC = 3,
+	ACPI_IBFT_TYPE_TARGET = 4,
+	ACPI_IBFT_TYPE_EXTENSIONS = 5,
+	ACPI_IBFT_TYPE_RESERVED = 6	/* 6 and greater are reserved */
+};
+
+/* IBFT subtables */
+
+struct acpi_ibft_control {
+	struct acpi_ibft_header header;
+	u16 extensions;
+	u16 initiator_offset;
+	u16 nic0_offset;
+	u16 target0_offset;
+	u16 nic1_offset;
+	u16 target1_offset;
+};
+
+struct acpi_ibft_initiator {
+	struct acpi_ibft_header header;
+	u8 sns_server[16];
+	u8 slp_server[16];
+	u8 primary_server[16];
+	u8 secondary_server[16];
+	u16 name_length;
+	u16 name_offset;
+};
+
+struct acpi_ibft_nic {
+	struct acpi_ibft_header header;
+	u8 ip_address[16];
+	u8 subnet_mask_prefix;
+	u8 origin;
+	u8 gateway[16];
+	u8 primary_dns[16];
+	u8 secondary_dns[16];
+	u8 dhcp[16];
+	u16 vlan;
+	u8 mac_address[6];
+	u16 pci_address;
+	u16 name_length;
+	u16 name_offset;
+};
+
+struct acpi_ibft_target {
+	struct acpi_ibft_header header;
+	u8 target_ip_address[16];
+	u16 target_ip_socket;
+	u8 target_boot_lun[8];
+	u8 chap_type;
+	u8 nic_association;
+	u16 target_name_length;
+	u16 target_name_offset;
+	u16 chap_name_length;
+	u16 chap_name_offset;
+	u16 chap_secret_length;
+	u16 chap_secret_offset;
+	u16 reverse_chap_name_length;
+	u16 reverse_chap_name_offset;
+	u16 reverse_chap_secret_length;
+	u16 reverse_chap_secret_offset;
+};
+
+/*******************************************************************************
+ *
+ * IVRS - I/O Virtualization Reporting Structure
+ *        Version 1
+ *
+ * Conforms to "AMD I/O Virtualization Technology (IOMMU) Specification",
+ * Revision 1.26, February 2009.
+ *
+ ******************************************************************************/
+
+struct acpi_table_ivrs {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u32 info;		/* Common virtualization info */
+	u64 reserved;
+};
+
+/* Values for Info field above */
+
+#define ACPI_IVRS_PHYSICAL_SIZE     0x00007F00	/* 7 bits, physical address size */
+#define ACPI_IVRS_VIRTUAL_SIZE      0x003F8000	/* 7 bits, virtual address size */
+#define ACPI_IVRS_ATS_RESERVED      0x00400000	/* ATS address translation range reserved */
+
+/* IVRS subtable header */
+
+struct acpi_ivrs_header {
+	u8 type;		/* Subtable type */
+	u8 flags;
+	u16 length;		/* Subtable length */
+	u16 device_id;		/* ID of IOMMU */
+};
+
+/* Values for subtable Type above */
+
+enum acpi_ivrs_type {
+	ACPI_IVRS_TYPE_HARDWARE = 0x10,
+	ACPI_IVRS_TYPE_MEMORY1 = 0x20,
+	ACPI_IVRS_TYPE_MEMORY2 = 0x21,
+	ACPI_IVRS_TYPE_MEMORY3 = 0x22
+};
+
+/* Masks for Flags field above for IVHD subtable */
+
+#define ACPI_IVHD_TT_ENABLE         (1)
+#define ACPI_IVHD_PASS_PW           (1<<1)
+#define ACPI_IVHD_RES_PASS_PW       (1<<2)
+#define ACPI_IVHD_ISOC              (1<<3)
+#define ACPI_IVHD_IOTLB             (1<<4)
+
+/* Masks for Flags field above for IVMD subtable */
+
+#define ACPI_IVMD_UNITY             (1)
+#define ACPI_IVMD_READ              (1<<1)
+#define ACPI_IVMD_WRITE             (1<<2)
+#define ACPI_IVMD_EXCLUSION_RANGE   (1<<3)
+
+/*
+ * IVRS subtables, correspond to Type in struct acpi_ivrs_header
+ */
+
+/* 0x10: I/O Virtualization Hardware Definition Block (IVHD) */
+
+struct acpi_ivrs_hardware {
+	struct acpi_ivrs_header header;
+	u16 capability_offset;	/* Offset for IOMMU control fields */
+	u64 base_address;	/* IOMMU control registers */
+	u16 pci_segment_group;
+	u16 info;		/* MSI number and unit ID */
+	u32 reserved;
+};
+
+/* Masks for Info field above */
+
+#define ACPI_IVHD_MSI_NUMBER_MASK   0x001F	/* 5 bits, MSI message number */
+#define ACPI_IVHD_UNIT_ID_MASK      0x1F00	/* 5 bits, unit_iD */
+
+/*
+ * Device Entries for IVHD subtable, appear after struct acpi_ivrs_hardware structure.
+ * Upper two bits of the Type field are the (encoded) length of the structure.
+ * Currently, only 4 and 8 byte entries are defined. 16 and 32 byte entries
+ * are reserved for future use but not defined.
+ */
+struct acpi_ivrs_de_header {
+	u8 type;
+	u16 id;
+	u8 data_setting;
+};
+
+/* Length of device entry is in the top two bits of Type field above */
+
+#define ACPI_IVHD_ENTRY_LENGTH      0xC0
+
+/* Values for device entry Type field above */
+
+enum acpi_ivrs_device_entry_type {
+	/* 4-byte device entries, all use struct acpi_ivrs_device4 */
+
+	ACPI_IVRS_TYPE_PAD4 = 0,
+	ACPI_IVRS_TYPE_ALL = 1,
+	ACPI_IVRS_TYPE_SELECT = 2,
+	ACPI_IVRS_TYPE_START = 3,
+	ACPI_IVRS_TYPE_END = 4,
+
+	/* 8-byte device entries */
+
+	ACPI_IVRS_TYPE_PAD8 = 64,
+	ACPI_IVRS_TYPE_NOT_USED = 65,
+	ACPI_IVRS_TYPE_ALIAS_SELECT = 66,	/* Uses struct acpi_ivrs_device8a */
+	ACPI_IVRS_TYPE_ALIAS_START = 67,	/* Uses struct acpi_ivrs_device8a */
+	ACPI_IVRS_TYPE_EXT_SELECT = 70,	/* Uses struct acpi_ivrs_device8b */
+	ACPI_IVRS_TYPE_EXT_START = 71,	/* Uses struct acpi_ivrs_device8b */
+	ACPI_IVRS_TYPE_SPECIAL = 72	/* Uses struct acpi_ivrs_device8c */
+};
+
+/* Values for Data field above */
+
+#define ACPI_IVHD_INIT_PASS         (1)
+#define ACPI_IVHD_EINT_PASS         (1<<1)
+#define ACPI_IVHD_NMI_PASS          (1<<2)
+#define ACPI_IVHD_SYSTEM_MGMT       (3<<4)
+#define ACPI_IVHD_LINT0_PASS        (1<<6)
+#define ACPI_IVHD_LINT1_PASS        (1<<7)
+
+/* Types 0-4: 4-byte device entry */
+
+struct acpi_ivrs_device4 {
+	struct acpi_ivrs_de_header header;
+};
+
+/* Types 66-67: 8-byte device entry */
+
+struct acpi_ivrs_device8a {
+	struct acpi_ivrs_de_header header;
+	u8 reserved1;
+	u16 used_id;
+	u8 reserved2;
+};
+
+/* Types 70-71: 8-byte device entry */
+
+struct acpi_ivrs_device8b {
+	struct acpi_ivrs_de_header header;
+	u32 extended_data;
+};
+
+/* Values for extended_data above */
+
+#define ACPI_IVHD_ATS_DISABLED      (1<<31)
+
+/* Type 72: 8-byte device entry */
+
+struct acpi_ivrs_device8c {
+	struct acpi_ivrs_de_header header;
+	u8 handle;
+	u16 used_id;
+	u8 variety;
+};
+
+/* Values for Variety field above */
+
+#define ACPI_IVHD_IOAPIC            1
+#define ACPI_IVHD_HPET              2
+
+/* 0x20, 0x21, 0x22: I/O Virtualization Memory Definition Block (IVMD) */
+
+struct acpi_ivrs_memory {
+	struct acpi_ivrs_header header;
+	u16 aux_data;
+	u64 reserved;
+	u64 start_address;
+	u64 memory_length;
+};
+
+/*******************************************************************************
+ *
+ * MCFG - PCI Memory Mapped Configuration table and sub-table
+ *        Version 1
+ *
+ * Conforms to "PCI Firmware Specification", Revision 3.0, June 20, 2005
+ *
+ ******************************************************************************/
+
+struct acpi_table_mcfg {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u8 reserved[8];
+};
+
+/* Subtable */
+
+struct acpi_mcfg_allocation {
+	u64 address;		/* Base address, processor-relative */
+	u16 pci_segment;	/* PCI segment group number */
+	u8 start_bus_number;	/* Starting PCI Bus number */
+	u8 end_bus_number;	/* Final PCI Bus number */
+	u32 reserved;
+};
+
+/*******************************************************************************
+ *
+ * MCHI - Management Controller Host Interface Table
+ *        Version 1
+ *
+ * Conforms to "Management Component Transport Protocol (MCTP) Host
+ * Interface Specification", Revision 1.0.0a, October 13, 2009
+ *
+ ******************************************************************************/
+
+struct acpi_table_mchi {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u8 interface_type;
+	u8 protocol;
+	u64 protocol_data;
+	u8 interrupt_type;
+	u8 gpe;
+	u8 pci_device_flag;
+	u32 global_interrupt;
+	struct acpi_generic_address control_register;
+	u8 pci_segment;
+	u8 pci_bus;
+	u8 pci_device;
+	u8 pci_function;
+};
+
+/*******************************************************************************
+ *
+ * SLIC - Software Licensing Description Table
+ *        Version 1
+ *
+ * Conforms to "OEM Activation 2.0 for Windows Vista Operating Systems",
+ * Copyright 2006
+ *
+ ******************************************************************************/
+
+/* Basic SLIC table is only the common ACPI header */
+
+struct acpi_table_slic {
+	struct acpi_table_header header;	/* Common ACPI table header */
+};
+
+/* Common SLIC subtable header */
+
+struct acpi_slic_header {
+	u32 type;
+	u32 length;
+};
+
+/* Values for Type field above */
+
+enum acpi_slic_type {
+	ACPI_SLIC_TYPE_PUBLIC_KEY = 0,
+	ACPI_SLIC_TYPE_WINDOWS_MARKER = 1,
+	ACPI_SLIC_TYPE_RESERVED = 2	/* 2 and greater are reserved */
+};
+
+/*
+ * SLIC Sub-tables, correspond to Type in struct acpi_slic_header
+ */
+
+/* 0: Public Key Structure */
+
+struct acpi_slic_key {
+	struct acpi_slic_header header;
+	u8 key_type;
+	u8 version;
+	u16 reserved;
+	u32 algorithm;
+	char magic[4];
+	u32 bit_length;
+	u32 exponent;
+	u8 modulus[128];
+};
+
+/* 1: Windows Marker Structure */
+
+struct acpi_slic_marker {
+	struct acpi_slic_header header;
+	u32 version;
+	char oem_id[ACPI_OEM_ID_SIZE];	/* ASCII OEM identification */
+	char oem_table_id[ACPI_OEM_TABLE_ID_SIZE];	/* ASCII OEM table identification */
+	char windows_flag[8];
+	u32 slic_version;
+	u8 reserved[16];
+	u8 signature[128];
+};
+
+/*******************************************************************************
+ *
+ * SPCR - Serial Port Console Redirection table
+ *        Version 1
+ *
+ * Conforms to "Serial Port Console Redirection Table",
+ * Version 1.00, January 11, 2002
+ *
+ ******************************************************************************/
+
+struct acpi_table_spcr {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u8 interface_type;	/* 0=full 16550, 1=subset of 16550 */
+	u8 reserved[3];
+	struct acpi_generic_address serial_port;
+	u8 interrupt_type;
+	u8 pc_interrupt;
+	u32 interrupt;
+	u8 baud_rate;
+	u8 parity;
+	u8 stop_bits;
+	u8 flow_control;
+	u8 terminal_type;
+	u8 reserved1;
+	u16 pci_device_id;
+	u16 pci_vendor_id;
+	u8 pci_bus;
+	u8 pci_device;
+	u8 pci_function;
+	u32 pci_flags;
+	u8 pci_segment;
+	u32 reserved2;
+};
+
+/* Masks for pci_flags field above */
+
+#define ACPI_SPCR_DO_NOT_DISABLE    (1)
+
+/*******************************************************************************
+ *
+ * SPMI - Server Platform Management Interface table
+ *        Version 5
+ *
+ * Conforms to "Intelligent Platform Management Interface Specification
+ * Second Generation v2.0", Document Revision 1.0, February 12, 2004 with
+ * June 12, 2009 markup.
+ *
+ ******************************************************************************/
+
+struct acpi_table_spmi {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u8 interface_type;
+	u8 reserved;		/* Must be 1 */
+	u16 spec_revision;	/* Version of IPMI */
+	u8 interrupt_type;
+	u8 gpe_number;		/* GPE assigned */
+	u8 reserved1;
+	u8 pci_device_flag;
+	u32 interrupt;
+	struct acpi_generic_address ipmi_register;
+	u8 pci_segment;
+	u8 pci_bus;
+	u8 pci_device;
+	u8 pci_function;
+	u8 reserved2;
+};
+
+/* Values for interface_type above */
+
+enum acpi_spmi_interface_types {
+	ACPI_SPMI_NOT_USED = 0,
+	ACPI_SPMI_KEYBOARD = 1,
+	ACPI_SPMI_SMI = 2,
+	ACPI_SPMI_BLOCK_TRANSFER = 3,
+	ACPI_SPMI_SMBUS = 4,
+	ACPI_SPMI_RESERVED = 5	/* 5 and above are reserved */
+};
+
+/*******************************************************************************
+ *
+ * TCPA - Trusted Computing Platform Alliance table
+ *        Version 1
+ *
+ * Conforms to "TCG PC Specific Implementation Specification",
+ * Version 1.1, August 18, 2003
+ *
+ ******************************************************************************/
+
+struct acpi_table_tcpa {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u16 reserved;
+	u32 max_log_length;	/* Maximum length for the event log area */
+	u64 log_address;	/* Address of the event log area */
+};
+
+/*******************************************************************************
+ *
+ * UEFI - UEFI Boot optimization Table
+ *        Version 1
+ *
+ * Conforms to "Unified Extensible Firmware Interface Specification",
+ * Version 2.3, May 8, 2009
+ *
+ ******************************************************************************/
+
+struct acpi_table_uefi {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u8 identifier[16];	/* UUID identifier */
+	u16 data_offset;	/* Offset of remaining data in table */
+};
+
+/*******************************************************************************
+ *
+ * WAET - Windows ACPI Emulated devices Table
+ *        Version 1
+ *
+ * Conforms to "Windows ACPI Emulated Devices Table", version 1.0, April 6, 2009
+ *
+ ******************************************************************************/
+
+struct acpi_table_waet {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u32 flags;
+};
+
+/* Masks for Flags field above */
+
+#define ACPI_WAET_RTC_NO_ACK        (1)	/* RTC requires no int acknowledge */
+#define ACPI_WAET_TIMER_ONE_READ    (1<<1)	/* PM timer requires only one read */
+
+/*******************************************************************************
+ *
+ * WDAT - Watchdog Action Table
+ *        Version 1
+ *
+ * Conforms to "Hardware Watchdog Timers Design Specification",
+ * Copyright 2006 Microsoft Corporation.
+ *
+ ******************************************************************************/
+
+struct acpi_table_wdat {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u32 header_length;	/* Watchdog Header Length */
+	u16 pci_segment;	/* PCI Segment number */
+	u8 pci_bus;		/* PCI Bus number */
+	u8 pci_device;		/* PCI Device number */
+	u8 pci_function;	/* PCI Function number */
+	u8 reserved[3];
+	u32 timer_period;	/* Period of one timer count (msec) */
+	u32 max_count;		/* Maximum counter value supported */
+	u32 min_count;		/* Minimum counter value */
+	u8 flags;
+	u8 reserved2[3];
+	u32 entries;		/* Number of watchdog entries that follow */
+};
+
+/* Masks for Flags field above */
+
+#define ACPI_WDAT_ENABLED           (1)
+#define ACPI_WDAT_STOPPED           0x80
+
+/* WDAT Instruction Entries (actions) */
+
+struct acpi_wdat_entry {
+	u8 action;
+	u8 instruction;
+	u16 reserved;
+	struct acpi_generic_address register_region;
+	u32 value;		/* Value used with Read/Write register */
+	u32 mask;		/* Bitmask required for this register instruction */
+};
+
+/* Values for Action field above */
+
+enum acpi_wdat_actions {
+	ACPI_WDAT_RESET = 1,
+	ACPI_WDAT_GET_CURRENT_COUNTDOWN = 4,
+	ACPI_WDAT_GET_COUNTDOWN = 5,
+	ACPI_WDAT_SET_COUNTDOWN = 6,
+	ACPI_WDAT_GET_RUNNING_STATE = 8,
+	ACPI_WDAT_SET_RUNNING_STATE = 9,
+	ACPI_WDAT_GET_STOPPED_STATE = 10,
+	ACPI_WDAT_SET_STOPPED_STATE = 11,
+	ACPI_WDAT_GET_REBOOT = 16,
+	ACPI_WDAT_SET_REBOOT = 17,
+	ACPI_WDAT_GET_SHUTDOWN = 18,
+	ACPI_WDAT_SET_SHUTDOWN = 19,
+	ACPI_WDAT_GET_STATUS = 32,
+	ACPI_WDAT_SET_STATUS = 33,
+	ACPI_WDAT_ACTION_RESERVED = 34	/* 34 and greater are reserved */
+};
+
+/* Values for Instruction field above */
+
+enum acpi_wdat_instructions {
+	ACPI_WDAT_READ_VALUE = 0,
+	ACPI_WDAT_READ_COUNTDOWN = 1,
+	ACPI_WDAT_WRITE_VALUE = 2,
+	ACPI_WDAT_WRITE_COUNTDOWN = 3,
+	ACPI_WDAT_INSTRUCTION_RESERVED = 4,	/* 4 and greater are reserved */
+	ACPI_WDAT_PRESERVE_REGISTER = 0x80	/* Except for this value */
+};
+
+/*******************************************************************************
+ *
+ * WDDT - Watchdog Descriptor Table
+ *        Version 1
+ *
+ * Conforms to "Using the Intel ICH Family Watchdog Timer (WDT)",
+ * Version 001, September 2002
+ *
+ ******************************************************************************/
+
+struct acpi_table_wddt {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u16 spec_version;
+	u16 table_version;
+	u16 pci_vendor_id;
+	struct acpi_generic_address address;
+	u16 max_count;		/* Maximum counter value supported */
+	u16 min_count;		/* Minimum counter value supported */
+	u16 period;
+	u16 status;
+	u16 capability;
+};
+
+/* Flags for Status field above */
+
+#define ACPI_WDDT_AVAILABLE     (1)
+#define ACPI_WDDT_ACTIVE        (1<<1)
+#define ACPI_WDDT_TCO_OS_OWNED  (1<<2)
+#define ACPI_WDDT_USER_RESET    (1<<11)
+#define ACPI_WDDT_WDT_RESET     (1<<12)
+#define ACPI_WDDT_POWER_FAIL    (1<<13)
+#define ACPI_WDDT_UNKNOWN_RESET (1<<14)
+
+/* Flags for Capability field above */
+
+#define ACPI_WDDT_AUTO_RESET    (1)
+#define ACPI_WDDT_ALERT_SUPPORT (1<<1)
+
+/*******************************************************************************
+ *
+ * WDRT - Watchdog Resource Table
+ *        Version 1
+ *
+ * Conforms to "Watchdog Timer Hardware Requirements for Windows Server 2003",
+ * Version 1.01, August 28, 2006
+ *
+ ******************************************************************************/
+
+struct acpi_table_wdrt {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	struct acpi_generic_address control_register;
+	struct acpi_generic_address count_register;
+	u16 pci_device_id;
+	u16 pci_vendor_id;
+	u8 pci_bus;		/* PCI Bus number */
+	u8 pci_device;		/* PCI Device number */
+	u8 pci_function;	/* PCI Function number */
+	u8 pci_segment;		/* PCI Segment number */
+	u16 max_count;		/* Maximum counter value supported */
+	u8 units;
+};
+
+/* Reset to default packing */
+
+#pragma pack()
+
+#endif				/* __ACTBL2_H__ */
diff --git a/include/acpi/actbl3.h b/include/acpi/actbl3.h
new file mode 100644
index 00000000..c22ce80e
--- /dev/null
+++ b/include/acpi/actbl3.h
@@ -0,0 +1,552 @@
+/******************************************************************************
+ *
+ * Name: actbl3.h - ACPI Table Definitions
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2011, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACTBL3_H__
+#define __ACTBL3_H__
+
+/*******************************************************************************
+ *
+ * Additional ACPI Tables (3)
+ *
+ * These tables are not consumed directly by the ACPICA subsystem, but are
+ * included here to support device drivers and the AML disassembler.
+ *
+ * The tables in this file are fully defined within the ACPI specification.
+ *
+ ******************************************************************************/
+
+/*
+ * Values for description table header signatures for tables defined in this
+ * file. Useful because they make it more difficult to inadvertently type in
+ * the wrong signature.
+ */
+#define ACPI_SIG_BGRT           "BGRT"	/* Boot Graphics Resource Table */
+#define ACPI_SIG_DRTM           "DRTM"	/* Dynamic Root of Trust for Measurement table */
+#define ACPI_SIG_FPDT           "FPDT"	/* Firmware Performance Data Table */
+#define ACPI_SIG_GTDT           "GTDT"	/* Generic Timer Description Table */
+#define ACPI_SIG_MPST           "MPST"	/* Memory Power State Table */
+#define ACPI_SIG_PCCT           "PCCT"	/* Platform Communications Channel Table */
+#define ACPI_SIG_PMTT           "PMTT"	/* Platform Memory Topology Table */
+#define ACPI_SIG_RASF           "RASF"	/* RAS Feature table */
+
+#define ACPI_SIG_S3PT           "S3PT"	/* S3 Performance (sub)Table */
+#define ACPI_SIG_PCCS           "PCC"	/* PCC Shared Memory Region */
+
+/* Reserved table signatures */
+
+#define ACPI_SIG_CSRT           "CSRT"	/* Core System Resources Table */
+#define ACPI_SIG_DBG2           "DBG2"	/* Debug Port table 2 */
+#define ACPI_SIG_MATR           "MATR"	/* Memory Address Translation Table */
+#define ACPI_SIG_MSDM           "MSDM"	/* Microsoft Data Management Table */
+#define ACPI_SIG_WPBT           "WPBT"	/* Windows Platform Binary Table */
+
+/*
+ * All tables must be byte-packed to match the ACPI specification, since
+ * the tables are provided by the system BIOS.
+ */
+#pragma pack(1)
+
+/*
+ * Note about bitfields: The u8 type is used for bitfields in ACPI tables.
+ * This is the only type that is even remotely portable. Anything else is not
+ * portable, so do not use any other bitfield types.
+ */
+
+/*******************************************************************************
+ *
+ * BGRT - Boot Graphics Resource Table (ACPI 5.0)
+ *        Version 1
+ *
+ ******************************************************************************/
+
+struct acpi_table_bgrt {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u16 version;
+	u8 status;
+	u8 image_type;
+	u64 image_address;
+	u32 image_offset_x;
+	u32 image_offset_y;
+};
+
+/*******************************************************************************
+ *
+ * DRTM - Dynamic Root of Trust for Measurement table
+ *
+ ******************************************************************************/
+
+struct acpi_table_drtm {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u64 entry_base_address;
+	u64 entry_length;
+	u32 entry_address32;
+	u64 entry_address64;
+	u64 exit_address;
+	u64 log_area_address;
+	u32 log_area_length;
+	u64 arch_dependent_address;
+	u32 flags;
+};
+
+/* 1) Validated Tables List */
+
+struct acpi_drtm_vtl_list {
+	u32 validated_table_list_count;
+};
+
+/* 2) Resources List */
+
+struct acpi_drtm_resource_list {
+	u32 resource_list_count;
+};
+
+/* 3) Platform-specific Identifiers List */
+
+struct acpi_drtm_id_list {
+	u32 id_list_count;
+};
+
+/*******************************************************************************
+ *
+ * FPDT - Firmware Performance Data Table (ACPI 5.0)
+ *        Version 1
+ *
+ ******************************************************************************/
+
+struct acpi_table_fpdt {
+	struct acpi_table_header header;	/* Common ACPI table header */
+};
+
+/* FPDT subtable header */
+
+struct acpi_fpdt_header {
+	u16 type;
+	u8 length;
+	u8 revision;
+};
+
+/* Values for Type field above */
+
+enum acpi_fpdt_type {
+	ACPI_FPDT_TYPE_BOOT = 0,
+	ACPI_FPDT_TYPE_S3PERF = 1,
+};
+
+/*
+ * FPDT subtables
+ */
+
+/* 0: Firmware Basic Boot Performance Record */
+
+struct acpi_fpdt_boot {
+	struct acpi_fpdt_header header;
+	u8 reserved[4];
+	u64 reset_end;
+	u64 load_start;
+	u64 startup_start;
+	u64 exit_services_entry;
+	u64 exit_services_exit;
+};
+
+/* 1: S3 Performance Table Pointer Record */
+
+struct acpi_fpdt_s3pt_ptr {
+	struct acpi_fpdt_header header;
+	u8 reserved[4];
+	u64 address;
+};
+
+/*
+ * S3PT - S3 Performance Table. This table is pointed to by the
+ * FPDT S3 Pointer Record above.
+ */
+struct acpi_table_s3pt {
+	u8 signature[4];	/* "S3PT" */
+	u32 length;
+};
+
+/*
+ * S3PT Subtables
+ */
+struct acpi_s3pt_header {
+	u16 type;
+	u8 length;
+	u8 revision;
+};
+
+/* Values for Type field above */
+
+enum acpi_s3pt_type {
+	ACPI_S3PT_TYPE_RESUME = 0,
+	ACPI_S3PT_TYPE_SUSPEND = 1,
+};
+
+struct acpi_s3pt_resume {
+	struct acpi_s3pt_header header;
+	u32 resume_count;
+	u64 full_resume;
+	u64 average_resume;
+};
+
+struct acpi_s3pt_suspend {
+	struct acpi_s3pt_header header;
+	u64 suspend_start;
+	u64 suspend_end;
+};
+
+/*******************************************************************************
+ *
+ * GTDT - Generic Timer Description Table (ACPI 5.0)
+ *        Version 1
+ *
+ ******************************************************************************/
+
+struct acpi_table_gtdt {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u64 address;
+	u32 flags;
+	u32 secure_pl1_interrupt;
+	u32 secure_pl1_flags;
+	u32 non_secure_pl1_interrupt;
+	u32 non_secure_pl1_flags;
+	u32 virtual_timer_interrupt;
+	u32 virtual_timer_flags;
+	u32 non_secure_pl2_interrupt;
+	u32 non_secure_pl2_flags;
+};
+
+/* Values for Flags field above */
+
+#define ACPI_GTDT_MAPPED_BLOCK_PRESENT      1
+
+/* Values for all "TimerFlags" fields above */
+
+#define ACPI_GTDT_INTERRUPT_MODE            1
+#define ACPI_GTDT_INTERRUPT_POLARITY        2
+
+/*******************************************************************************
+ *
+ * MPST - Memory Power State Table (ACPI 5.0)
+ *        Version 1
+ *
+ ******************************************************************************/
+
+#define ACPI_MPST_CHANNEL_INFO \
+	u16                             reserved1; \
+	u8                              channel_id; \
+	u8                              reserved2; \
+	u16                             power_node_count;
+
+/* Main table */
+
+struct acpi_table_mpst {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	 ACPI_MPST_CHANNEL_INFO	/* Platform Communication Channel */
+};
+
+/* Memory Platform Communication Channel Info */
+
+struct acpi_mpst_channel {
+	ACPI_MPST_CHANNEL_INFO	/* Platform Communication Channel */
+};
+
+/* Memory Power Node Structure */
+
+struct acpi_mpst_power_node {
+	u8 flags;
+	u8 reserved1;
+	u16 node_id;
+	u32 length;
+	u64 range_address;
+	u64 range_length;
+	u8 num_power_states;
+	u8 num_physical_components;
+	u16 reserved2;
+};
+
+/* Values for Flags field above */
+
+#define ACPI_MPST_ENABLED               1
+#define ACPI_MPST_POWER_MANAGED         2
+#define ACPI_MPST_HOT_PLUG_CAPABLE      4
+
+/* Memory Power State Structure (follows POWER_NODE above) */
+
+struct acpi_mpst_power_state {
+	u8 power_state;
+	u8 info_index;
+};
+
+/* Physical Component ID Structure (follows POWER_STATE above) */
+
+struct acpi_mpst_component {
+	u16 component_id;
+};
+
+/* Memory Power State Characteristics Structure (follows all POWER_NODEs) */
+
+struct acpi_mpst_data_hdr {
+	u16 characteristics_count;
+};
+
+struct acpi_mpst_power_data {
+	u8 revision;
+	u8 flags;
+	u16 reserved1;
+	u32 average_power;
+	u32 power_saving;
+	u64 exit_latency;
+	u64 reserved2;
+};
+
+/* Values for Flags field above */
+
+#define ACPI_MPST_PRESERVE              1
+#define ACPI_MPST_AUTOENTRY             2
+#define ACPI_MPST_AUTOEXIT              4
+
+/* Shared Memory Region (not part of an ACPI table) */
+
+struct acpi_mpst_shared {
+	u32 signature;
+	u16 pcc_command;
+	u16 pcc_status;
+	u16 command_register;
+	u16 status_register;
+	u16 power_state_id;
+	u16 power_node_id;
+	u64 energy_consumed;
+	u64 average_power;
+};
+
+/*******************************************************************************
+ *
+ * PCCT - Platform Communications Channel Table (ACPI 5.0)
+ *        Version 1
+ *
+ ******************************************************************************/
+
+struct acpi_table_pcct {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u32 flags;
+	u32 latency;
+	u32 reserved;
+};
+
+/* Values for Flags field above */
+
+#define ACPI_PCCT_DOORBELL              1
+
+/*
+ * PCCT subtables
+ */
+
+/* 0: Generic Communications Subspace */
+
+struct acpi_pcct_subspace {
+	struct acpi_subtable_header header;
+	u8 reserved[6];
+	u64 base_address;
+	u64 length;
+	struct acpi_generic_address doorbell_register;
+	u64 preserve_mask;
+	u64 write_mask;
+};
+
+/*
+ * PCC memory structures (not part of the ACPI table)
+ */
+
+/* Shared Memory Region */
+
+struct acpi_pcct_shared_memory {
+	u32 signature;
+	u16 command;
+	u16 status;
+};
+
+/*******************************************************************************
+ *
+ * PMTT - Platform Memory Topology Table (ACPI 5.0)
+ *        Version 1
+ *
+ ******************************************************************************/
+
+struct acpi_table_pmtt {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u32 reserved;
+};
+
+/* Common header for PMTT subtables that follow main table */
+
+struct acpi_pmtt_header {
+	u8 type;
+	u8 reserved1;
+	u16 length;
+	u16 flags;
+	u16 reserved2;
+};
+
+/* Values for Type field above */
+
+#define ACPI_PMTT_TYPE_SOCKET           0
+#define ACPI_PMTT_TYPE_CONTROLLER       1
+#define ACPI_PMTT_TYPE_DIMM             2
+#define ACPI_PMTT_TYPE_RESERVED         3	/* 0x03-0xFF are reserved */
+
+/* Values for Flags field above */
+
+#define ACPI_PMTT_TOP_LEVEL             0x0001
+#define ACPI_PMTT_PHYSICAL              0x0002
+#define ACPI_PMTT_MEMORY_TYPE           0x000C
+
+/*
+ * PMTT subtables, correspond to Type in struct acpi_pmtt_header
+ */
+
+/* 0: Socket Structure */
+
+struct acpi_pmtt_socket {
+	struct acpi_pmtt_header header;
+	u16 socket_id;
+	u16 reserved;
+};
+
+/* 1: Memory Controller subtable */
+
+struct acpi_pmtt_controller {
+	struct acpi_pmtt_header header;
+	u32 read_latency;
+	u32 write_latency;
+	u32 read_bandwidth;
+	u32 write_bandwidth;
+	u16 access_width;
+	u16 alignment;
+	u16 reserved;
+	u16 domain_count;
+};
+
+/* 1a: Proximity Domain substructure */
+
+struct acpi_pmtt_domain {
+	u32 proximity_domain;
+};
+
+/* 2: Physical Component Identifier (DIMM) */
+
+struct acpi_pmtt_physical_component {
+	struct acpi_pmtt_header header;
+	u16 component_id;
+	u16 reserved;
+	u32 memory_size;
+	u32 bios_handle;
+};
+
+/*******************************************************************************
+ *
+ * RASF - RAS Feature Table (ACPI 5.0)
+ *        Version 1
+ *
+ ******************************************************************************/
+
+struct acpi_table_rasf {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u8 channel_id[12];
+};
+
+/* RASF Platform Communication Channel Shared Memory Region */
+
+struct acpi_rasf_shared_memory {
+	u32 signature;
+	u16 command;
+	u16 status;
+	u64 requested_address;
+	u64 requested_length;
+	u64 actual_address;
+	u64 actual_length;
+	u16 flags;
+	u8 speed;
+};
+
+/* Masks for Flags and Speed fields above */
+
+#define ACPI_RASF_SCRUBBER_RUNNING      1
+#define ACPI_RASF_SPEED                 (7<<1)
+
+/* Channel Commands */
+
+enum acpi_rasf_commands {
+	ACPI_RASF_GET_RAS_CAPABILITIES = 1,
+	ACPI_RASF_GET_PATROL_PARAMETERS = 2,
+	ACPI_RASF_START_PATROL_SCRUBBER = 3,
+	ACPI_RASF_STOP_PATROL_SCRUBBER = 4
+};
+
+/* Channel Command flags */
+
+#define ACPI_RASF_GENERATE_SCI          (1<<15)
+
+/* Status values */
+
+enum acpi_rasf_status {
+	ACPI_RASF_SUCCESS = 0,
+	ACPI_RASF_NOT_VALID = 1,
+	ACPI_RASF_NOT_SUPPORTED = 2,
+	ACPI_RASF_BUSY = 3,
+	ACPI_RASF_FAILED = 4,
+	ACPI_RASF_ABORTED = 5,
+	ACPI_RASF_INVALID_DATA = 6
+};
+
+/* Status flags */
+
+#define ACPI_RASF_COMMAND_COMPLETE      (1)
+#define ACPI_RASF_SCI_DOORBELL          (1<<1)
+#define ACPI_RASF_ERROR                 (1<<2)
+#define ACPI_RASF_STATUS                (0x1F<<3)
+
+/* Reset to default packing */
+
+#pragma pack()
+
+#endif				/* __ACTBL3_H__ */
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
new file mode 100644
index 00000000..e8bcc474
--- /dev/null
+++ b/include/acpi/actypes.h
@@ -0,0 +1,1121 @@
+/******************************************************************************
+ *
+ * Name: actypes.h - Common data types for the entire ACPI subsystem
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2011, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACTYPES_H__
+#define __ACTYPES_H__
+
+/* acpisrc:struct_defs -- for acpisrc conversion */
+
+/*
+ * ACPI_MACHINE_WIDTH must be specified in an OS- or compiler-dependent header
+ * and must be either 32 or 64. 16-bit ACPICA is no longer supported, as of
+ * 12/2006.
+ */
+#ifndef ACPI_MACHINE_WIDTH
+#error ACPI_MACHINE_WIDTH not defined
+#endif
+
+/*! [Begin] no source code translation */
+
+/*
+ * Data type ranges
+ * Note: These macros are designed to be compiler independent as well as
+ * working around problems that some 32-bit compilers have with 64-bit
+ * constants.
+ */
+#define ACPI_UINT8_MAX                  (UINT8) (~((UINT8)  0))	/* 0xFF               */
+#define ACPI_UINT16_MAX                 (UINT16)(~((UINT16) 0))	/* 0xFFFF             */
+#define ACPI_UINT32_MAX                 (UINT32)(~((UINT32) 0))	/* 0xFFFFFFFF         */
+#define ACPI_UINT64_MAX                 (UINT64)(~((UINT64) 0))	/* 0xFFFFFFFFFFFFFFFF */
+#define ACPI_ASCII_MAX                  0x7F
+
+/*
+ * Architecture-specific ACPICA Subsystem Data Types
+ *
+ * The goal of these types is to provide source code portability across
+ * 16-bit, 32-bit, and 64-bit targets.
+ *
+ * 1) The following types are of fixed size for all targets (16/32/64):
+ *
+ * BOOLEAN      Logical boolean
+ *
+ * UINT8        8-bit  (1 byte) unsigned value
+ * UINT16       16-bit (2 byte) unsigned value
+ * UINT32       32-bit (4 byte) unsigned value
+ * UINT64       64-bit (8 byte) unsigned value
+ *
+ * INT16        16-bit (2 byte) signed value
+ * INT32        32-bit (4 byte) signed value
+ * INT64        64-bit (8 byte) signed value
+ *
+ * COMPILER_DEPENDENT_UINT64/INT64 - These types are defined in the
+ * compiler-dependent header(s) and were introduced because there is no common
+ * 64-bit integer type across the various compilation models, as shown in
+ * the table below.
+ *
+ * Datatype  LP64 ILP64 LLP64 ILP32 LP32 16bit
+ * char      8    8     8     8     8    8
+ * short     16   16    16    16    16   16
+ * _int32         32
+ * int       32   64    32    32    16   16
+ * long      64   64    32    32    32   32
+ * long long            64    64
+ * pointer   64   64    64    32    32   32
+ *
+ * Note: ILP64 and LP32 are currently not supported.
+ *
+ *
+ * 2) These types represent the native word size of the target mode of the
+ * processor, and may be 16-bit, 32-bit, or 64-bit as required. They are
+ * usually used for memory allocation, efficient loop counters, and array
+ * indexes. The types are similar to the size_t type in the C library and are
+ * required because there is no C type that consistently represents the native
+ * data width. ACPI_SIZE is needed because there is no guarantee that a
+ * kernel-level C library is present.
+ *
+ * ACPI_SIZE        16/32/64-bit unsigned value
+ * ACPI_NATIVE_INT  16/32/64-bit signed value
+ */
+
+/*******************************************************************************
+ *
+ * Common types for all compilers, all targets
+ *
+ ******************************************************************************/
+
+typedef unsigned char BOOLEAN;
+typedef unsigned char UINT8;
+typedef unsigned short UINT16;
+typedef COMPILER_DEPENDENT_UINT64 UINT64;
+typedef COMPILER_DEPENDENT_INT64 INT64;
+
+/*! [End] no source code translation !*/
+
+/*
+ * Value returned by acpi_os_get_thread_id. There is no standard "thread_id"
+ * across operating systems or even the various UNIX systems. Since ACPICA
+ * only needs the thread ID as a unique thread identifier, we use a u64
+ * as the only common data type - it will accommodate any type of pointer or
+ * any type of integer. It is up to the host-dependent OSL to cast the
+ * native thread ID type to a u64 (in acpi_os_get_thread_id).
+ */
+#define acpi_thread_id                  u64
+
+/*******************************************************************************
+ *
+ * Types specific to 64-bit targets
+ *
+ ******************************************************************************/
+
+#if ACPI_MACHINE_WIDTH == 64
+
+/*! [Begin] no source code translation (keep the typedefs as-is) */
+
+typedef unsigned int UINT32;
+typedef int INT32;
+
+/*! [End] no source code translation !*/
+
+typedef s64 acpi_native_int;
+
+typedef u64 acpi_size;
+typedef u64 acpi_io_address;
+typedef u64 acpi_physical_address;
+
+#define ACPI_MAX_PTR                    ACPI_UINT64_MAX
+#define ACPI_SIZE_MAX                   ACPI_UINT64_MAX
+
+#define ACPI_USE_NATIVE_DIVIDE	/* Has native 64-bit integer support */
+
+/*
+ * In the case of the Itanium Processor Family (IPF), the hardware does not
+ * support misaligned memory transfers. Set the MISALIGNMENT_NOT_SUPPORTED flag
+ * to indicate that special precautions must be taken to avoid alignment faults.
+ * (IA64 or ia64 is currently used by existing compilers to indicate IPF.)
+ *
+ * Note: Em64_t and other X86-64 processors support misaligned transfers,
+ * so there is no need to define this flag.
+ */
+#if defined (__IA64__) || defined (__ia64__)
+#define ACPI_MISALIGNMENT_NOT_SUPPORTED
+#endif
+
+/*******************************************************************************
+ *
+ * Types specific to 32-bit targets
+ *
+ ******************************************************************************/
+
+#elif ACPI_MACHINE_WIDTH == 32
+
+/*! [Begin] no source code translation (keep the typedefs as-is) */
+
+typedef unsigned int UINT32;
+typedef int INT32;
+
+/*! [End] no source code translation !*/
+
+typedef s32 acpi_native_int;
+
+typedef u32 acpi_size;
+typedef u32 acpi_io_address;
+typedef u32 acpi_physical_address;
+
+#define ACPI_MAX_PTR                    ACPI_UINT32_MAX
+#define ACPI_SIZE_MAX                   ACPI_UINT32_MAX
+
+#else
+
+/* ACPI_MACHINE_WIDTH must be either 64 or 32 */
+
+#error unknown ACPI_MACHINE_WIDTH
+#endif
+
+/*******************************************************************************
+ *
+ * OS-dependent types
+ *
+ * If the defaults below are not appropriate for the host system, they can
+ * be defined in the OS-specific header, and this will take precedence.
+ *
+ ******************************************************************************/
+
+/* Flags for acpi_os_acquire_lock/acpi_os_release_lock */
+
+#ifndef acpi_cpu_flags
+#define acpi_cpu_flags			acpi_size
+#endif
+
+/* Object returned from acpi_os_create_cache */
+
+#ifndef acpi_cache_t
+#ifdef ACPI_USE_LOCAL_CACHE
+#define acpi_cache_t                    struct acpi_memory_list
+#else
+#define acpi_cache_t                    void *
+#endif
+#endif
+
+/*
+ * Synchronization objects - Mutexes, Semaphores, and spin_locks
+ */
+#if (ACPI_MUTEX_TYPE == ACPI_BINARY_SEMAPHORE)
+/*
+ * These macros are used if the host OS does not support a mutex object.
+ * Map the OSL Mutex interfaces to binary semaphores.
+ */
+#define acpi_mutex                      acpi_semaphore
+#define acpi_os_create_mutex(out_handle) acpi_os_create_semaphore (1, 1, out_handle)
+#define acpi_os_delete_mutex(handle)    (void) acpi_os_delete_semaphore (handle)
+#define acpi_os_acquire_mutex(handle,time) acpi_os_wait_semaphore (handle, 1, time)
+#define acpi_os_release_mutex(handle)   (void) acpi_os_signal_semaphore (handle, 1)
+#endif
+
+/* Configurable types for synchronization objects */
+
+#ifndef acpi_spinlock
+#define acpi_spinlock                   void *
+#endif
+
+#ifndef acpi_semaphore
+#define acpi_semaphore                  void *
+#endif
+
+#ifndef acpi_mutex
+#define acpi_mutex                      void *
+#endif
+
+/*******************************************************************************
+ *
+ * Compiler-dependent types
+ *
+ * If the defaults below are not appropriate for the host compiler, they can
+ * be defined in the compiler-specific header, and this will take precedence.
+ *
+ ******************************************************************************/
+
+/* Use C99 uintptr_t for pointer casting if available, "void *" otherwise */
+
+#ifndef acpi_uintptr_t
+#define acpi_uintptr_t                  void *
+#endif
+
+/*
+ * ACPI_PRINTF_LIKE is used to tag functions as "printf-like" because
+ * some compilers can catch printf format string problems
+ */
+#ifndef ACPI_PRINTF_LIKE
+#define ACPI_PRINTF_LIKE(c)
+#endif
+
+/*
+ * Some compilers complain about unused variables. Sometimes we don't want to
+ * use all the variables (for example, _acpi_module_name). This allows us
+ * to tell the compiler in a per-variable manner that a variable
+ * is unused
+ */
+#ifndef ACPI_UNUSED_VAR
+#define ACPI_UNUSED_VAR
+#endif
+
+/*
+ * All ACPICA functions that are available to the rest of the kernel are
+ * tagged with this macro which can be defined as appropriate for the host.
+ */
+#ifndef ACPI_EXPORT_SYMBOL
+#define ACPI_EXPORT_SYMBOL(symbol)
+#endif
+
+/******************************************************************************
+ *
+ * ACPI Specification constants (Do not change unless the specification changes)
+ *
+ *****************************************************************************/
+
+/* Number of distinct FADT-based GPE register blocks (GPE0 and GPE1) */
+
+#define ACPI_MAX_GPE_BLOCKS             2
+
+/* Default ACPI register widths */
+
+#define ACPI_GPE_REGISTER_WIDTH         8
+#define ACPI_PM1_REGISTER_WIDTH         16
+#define ACPI_PM2_REGISTER_WIDTH         8
+#define ACPI_PM_TIMER_WIDTH             32
+
+/* Names within the namespace are 4 bytes long */
+
+#define ACPI_NAME_SIZE                  4
+#define ACPI_PATH_SEGMENT_LENGTH        5	/* 4 chars for name + 1 char for separator */
+#define ACPI_PATH_SEPARATOR             '.'
+
+/* Sizes for ACPI table headers */
+
+#define ACPI_OEM_ID_SIZE                6
+#define ACPI_OEM_TABLE_ID_SIZE          8
+
+/* ACPI/PNP hardware IDs */
+
+#define PCI_ROOT_HID_STRING             "PNP0A03"
+#define PCI_EXPRESS_ROOT_HID_STRING     "PNP0A08"
+
+/* PM Timer ticks per second (HZ) */
+
+#define PM_TIMER_FREQUENCY              3579545
+
+/*******************************************************************************
+ *
+ * Independent types
+ *
+ ******************************************************************************/
+
+/* Logical defines and NULL */
+
+#ifdef FALSE
+#undef FALSE
+#endif
+#define FALSE                           (1 == 0)
+
+#ifdef TRUE
+#undef TRUE
+#endif
+#define TRUE                            (1 == 1)
+
+#ifndef NULL
+#define NULL                            (void *) 0
+#endif
+
+/*
+ * Miscellaneous types
+ */
+typedef u32 acpi_status;	/* All ACPI Exceptions */
+typedef u32 acpi_name;		/* 4-byte ACPI name */
+typedef char *acpi_string;	/* Null terminated ASCII string */
+typedef void *acpi_handle;	/* Actually a ptr to a NS Node */
+
+/* Owner IDs are used to track namespace nodes for selective deletion */
+
+typedef u8 acpi_owner_id;
+#define ACPI_OWNER_ID_MAX               0xFF
+
+#define ACPI_INTEGER_BIT_SIZE           64
+#define ACPI_MAX_DECIMAL_DIGITS         20	/* 2^64 = 18,446,744,073,709,551,616 */
+
+#if ACPI_MACHINE_WIDTH == 64
+#define ACPI_USE_NATIVE_DIVIDE	/* Use compiler native 64-bit divide */
+#endif
+
+#define ACPI_MAX64_DECIMAL_DIGITS       20
+#define ACPI_MAX32_DECIMAL_DIGITS       10
+#define ACPI_MAX16_DECIMAL_DIGITS        5
+#define ACPI_MAX8_DECIMAL_DIGITS         3
+
+/* PM Timer ticks per second (HZ) */
+
+#define PM_TIMER_FREQUENCY  3579545
+
+/*
+ * Constants with special meanings
+ */
+#define ACPI_ROOT_OBJECT                ACPI_ADD_PTR (acpi_handle, NULL, ACPI_MAX_PTR)
+#define ACPI_WAIT_FOREVER               0xFFFF	/* u16, as per ACPI spec */
+#define ACPI_DO_NOT_WAIT                0
+
+/*
+ * Obsolete: Acpi integer width. In ACPI version 1 (1996), integers are 32 bits.
+ * In ACPI version 2 (2000) and later, integers are 64 bits. Note that this
+ * pertains to the ACPI integer type only, not to other integers used in the
+ * implementation of the ACPICA subsystem.
+ *
+ * 01/2010: This type is obsolete and has been removed from the entire ACPICA
+ * code base. It remains here for compatibility with device drivers that use
+ * the type. However, it will be removed in the future.
+ */
+typedef u64 acpi_integer;
+#define ACPI_INTEGER_MAX                ACPI_UINT64_MAX
+
+/*******************************************************************************
+ *
+ * Commonly used macros
+ *
+ ******************************************************************************/
+
+/* Data manipulation */
+
+#define ACPI_LOBYTE(integer)            ((u8)   (u16)(integer))
+#define ACPI_HIBYTE(integer)            ((u8) (((u16)(integer)) >> 8))
+#define ACPI_LOWORD(integer)            ((u16)  (u32)(integer))
+#define ACPI_HIWORD(integer)            ((u16)(((u32)(integer)) >> 16))
+#define ACPI_LODWORD(integer64)         ((u32)  (u64)(integer64))
+#define ACPI_HIDWORD(integer64)         ((u32)(((u64)(integer64)) >> 32))
+
+#define ACPI_SET_BIT(target,bit)        ((target) |= (bit))
+#define ACPI_CLEAR_BIT(target,bit)      ((target) &= ~(bit))
+#define ACPI_MIN(a,b)                   (((a)<(b))?(a):(b))
+#define ACPI_MAX(a,b)                   (((a)>(b))?(a):(b))
+
+/* Size calculation */
+
+#define ACPI_ARRAY_LENGTH(x)            (sizeof(x) / sizeof((x)[0]))
+
+/* Pointer manipulation */
+
+#define ACPI_CAST_PTR(t, p)             ((t *) (acpi_uintptr_t) (p))
+#define ACPI_CAST_INDIRECT_PTR(t, p)    ((t **) (acpi_uintptr_t) (p))
+#define ACPI_ADD_PTR(t, a, b)           ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) + (acpi_size)(b)))
+#define ACPI_PTR_DIFF(a, b)             (acpi_size) (ACPI_CAST_PTR (u8, (a)) - ACPI_CAST_PTR (u8, (b)))
+
+/* Pointer/Integer type conversions */
+
+#define ACPI_TO_POINTER(i)              ACPI_ADD_PTR (void, (void *) NULL,(acpi_size) i)
+#define ACPI_TO_INTEGER(p)              ACPI_PTR_DIFF (p, (void *) NULL)
+#define ACPI_OFFSET(d, f)               (acpi_size) ACPI_PTR_DIFF (&(((d *)0)->f), (void *) NULL)
+#define ACPI_PHYSADDR_TO_PTR(i)         ACPI_TO_POINTER(i)
+#define ACPI_PTR_TO_PHYSADDR(i)         ACPI_TO_INTEGER(i)
+
+#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
+#define ACPI_COMPARE_NAME(a,b)          (*ACPI_CAST_PTR (u32, (a)) == *ACPI_CAST_PTR (u32, (b)))
+#else
+#define ACPI_COMPARE_NAME(a,b)          (!ACPI_STRNCMP (ACPI_CAST_PTR (char, (a)), ACPI_CAST_PTR (char, (b)), ACPI_NAME_SIZE))
+#endif
+
+/*******************************************************************************
+ *
+ * Miscellaneous constants
+ *
+ ******************************************************************************/
+
+/*
+ * Initialization sequence
+ */
+#define ACPI_FULL_INITIALIZATION        0x00
+#define ACPI_NO_ADDRESS_SPACE_INIT      0x01
+#define ACPI_NO_EVENT_INIT              0x04
+#define ACPI_NO_HANDLER_INIT            0x08
+#define ACPI_NO_ACPI_ENABLE             0x10
+#define ACPI_NO_DEVICE_INIT             0x20
+#define ACPI_NO_OBJECT_INIT             0x40
+
+/*
+ * Initialization state
+ */
+#define ACPI_SUBSYSTEM_INITIALIZE       0x01
+#define ACPI_INITIALIZED_OK             0x02
+
+/*
+ * Power state values
+ */
+#define ACPI_STATE_UNKNOWN              (u8) 0xFF
+
+#define ACPI_STATE_S0                   (u8) 0
+#define ACPI_STATE_S1                   (u8) 1
+#define ACPI_STATE_S2                   (u8) 2
+#define ACPI_STATE_S3                   (u8) 3
+#define ACPI_STATE_S4                   (u8) 4
+#define ACPI_STATE_S5                   (u8) 5
+#define ACPI_S_STATES_MAX               ACPI_STATE_S5
+#define ACPI_S_STATE_COUNT              6
+
+#define ACPI_STATE_D0                   (u8) 0
+#define ACPI_STATE_D1                   (u8) 1
+#define ACPI_STATE_D2                   (u8) 2
+#define ACPI_STATE_D3_HOT               (u8) 3
+#define ACPI_STATE_D3                   (u8) 4
+#define ACPI_STATE_D3_COLD              ACPI_STATE_D3
+#define ACPI_D_STATES_MAX               ACPI_STATE_D3
+#define ACPI_D_STATE_COUNT              5
+
+#define ACPI_STATE_C0                   (u8) 0
+#define ACPI_STATE_C1                   (u8) 1
+#define ACPI_STATE_C2                   (u8) 2
+#define ACPI_STATE_C3                   (u8) 3
+#define ACPI_C_STATES_MAX               ACPI_STATE_C3
+#define ACPI_C_STATE_COUNT              4
+
+/*
+ * Sleep type invalid value
+ */
+#define ACPI_SLEEP_TYPE_MAX             0x7
+#define ACPI_SLEEP_TYPE_INVALID         0xFF
+
+/*
+ * Sleep/Wake flags
+ */
+#define ACPI_NO_OPTIONAL_METHODS        0x00	/* Do not execute any optional methods */
+#define ACPI_EXECUTE_GTS                0x01	/* For enter sleep interface */
+#define ACPI_EXECUTE_BFS                0x02	/* For leave sleep prep interface */
+
+/*
+ * Standard notify values
+ */
+#define ACPI_NOTIFY_BUS_CHECK           (u8) 0x00
+#define ACPI_NOTIFY_DEVICE_CHECK        (u8) 0x01
+#define ACPI_NOTIFY_DEVICE_WAKE         (u8) 0x02
+#define ACPI_NOTIFY_EJECT_REQUEST       (u8) 0x03
+#define ACPI_NOTIFY_DEVICE_CHECK_LIGHT  (u8) 0x04
+#define ACPI_NOTIFY_FREQUENCY_MISMATCH  (u8) 0x05
+#define ACPI_NOTIFY_BUS_MODE_MISMATCH   (u8) 0x06
+#define ACPI_NOTIFY_POWER_FAULT         (u8) 0x07
+#define ACPI_NOTIFY_CAPABILITIES_CHECK  (u8) 0x08
+#define ACPI_NOTIFY_DEVICE_PLD_CHECK    (u8) 0x09
+#define ACPI_NOTIFY_RESERVED            (u8) 0x0A
+#define ACPI_NOTIFY_LOCALITY_UPDATE     (u8) 0x0B
+#define ACPI_NOTIFY_SHUTDOWN_REQUEST    (u8) 0x0C
+
+#define ACPI_NOTIFY_MAX                 0x0C
+
+/*
+ * Types associated with ACPI names and objects. The first group of
+ * values (up to ACPI_TYPE_EXTERNAL_MAX) correspond to the definition
+ * of the ACPI object_type() operator (See the ACPI Spec). Therefore,
+ * only add to the first group if the spec changes.
+ *
+ * NOTE: Types must be kept in sync with the global acpi_ns_properties
+ * and acpi_ns_type_names arrays.
+ */
+typedef u32 acpi_object_type;
+
+#define ACPI_TYPE_ANY                   0x00
+#define ACPI_TYPE_INTEGER               0x01	/* Byte/Word/Dword/Zero/One/Ones */
+#define ACPI_TYPE_STRING                0x02
+#define ACPI_TYPE_BUFFER                0x03
+#define ACPI_TYPE_PACKAGE               0x04	/* byte_const, multiple data_term/Constant/super_name */
+#define ACPI_TYPE_FIELD_UNIT            0x05
+#define ACPI_TYPE_DEVICE                0x06	/* Name, multiple Node */
+#define ACPI_TYPE_EVENT                 0x07
+#define ACPI_TYPE_METHOD                0x08	/* Name, byte_const, multiple Code */
+#define ACPI_TYPE_MUTEX                 0x09
+#define ACPI_TYPE_REGION                0x0A
+#define ACPI_TYPE_POWER                 0x0B	/* Name,byte_const,word_const,multi Node */
+#define ACPI_TYPE_PROCESSOR             0x0C	/* Name,byte_const,Dword_const,byte_const,multi nm_o */
+#define ACPI_TYPE_THERMAL               0x0D	/* Name, multiple Node */
+#define ACPI_TYPE_BUFFER_FIELD          0x0E
+#define ACPI_TYPE_DDB_HANDLE            0x0F
+#define ACPI_TYPE_DEBUG_OBJECT          0x10
+
+#define ACPI_TYPE_EXTERNAL_MAX          0x10
+
+/*
+ * These are object types that do not map directly to the ACPI
+ * object_type() operator. They are used for various internal purposes only.
+ * If new predefined ACPI_TYPEs are added (via the ACPI specification), these
+ * internal types must move upwards. (There is code that depends on these
+ * values being contiguous with the external types above.)
+ */
+#define ACPI_TYPE_LOCAL_REGION_FIELD    0x11
+#define ACPI_TYPE_LOCAL_BANK_FIELD      0x12
+#define ACPI_TYPE_LOCAL_INDEX_FIELD     0x13
+#define ACPI_TYPE_LOCAL_REFERENCE       0x14	/* Arg#, Local#, Name, Debug, ref_of, Index */
+#define ACPI_TYPE_LOCAL_ALIAS           0x15
+#define ACPI_TYPE_LOCAL_METHOD_ALIAS    0x16
+#define ACPI_TYPE_LOCAL_NOTIFY          0x17
+#define ACPI_TYPE_LOCAL_ADDRESS_HANDLER 0x18
+#define ACPI_TYPE_LOCAL_RESOURCE        0x19
+#define ACPI_TYPE_LOCAL_RESOURCE_FIELD  0x1A
+#define ACPI_TYPE_LOCAL_SCOPE           0x1B	/* 1 Name, multiple object_list Nodes */
+
+#define ACPI_TYPE_NS_NODE_MAX           0x1B	/* Last typecode used within a NS Node */
+
+/*
+ * These are special object types that never appear in
+ * a Namespace node, only in a union acpi_operand_object
+ */
+#define ACPI_TYPE_LOCAL_EXTRA           0x1C
+#define ACPI_TYPE_LOCAL_DATA            0x1D
+
+#define ACPI_TYPE_LOCAL_MAX             0x1D
+
+/* All types above here are invalid */
+
+#define ACPI_TYPE_INVALID               0x1E
+#define ACPI_TYPE_NOT_FOUND             0xFF
+
+#define ACPI_NUM_NS_TYPES               (ACPI_TYPE_INVALID + 1)
+
+/*
+ * All I/O
+ */
+#define ACPI_READ                       0
+#define ACPI_WRITE                      1
+#define ACPI_IO_MASK                    1
+
+/*
+ * Event Types: Fixed & General Purpose
+ */
+typedef u32 acpi_event_type;
+
+/*
+ * Fixed events
+ */
+#define ACPI_EVENT_PMTIMER              0
+#define ACPI_EVENT_GLOBAL               1
+#define ACPI_EVENT_POWER_BUTTON         2
+#define ACPI_EVENT_SLEEP_BUTTON         3
+#define ACPI_EVENT_RTC                  4
+#define ACPI_EVENT_MAX                  4
+#define ACPI_NUM_FIXED_EVENTS           ACPI_EVENT_MAX + 1
+
+/*
+ * Event Status - Per event
+ * -------------
+ * The encoding of acpi_event_status is illustrated below.
+ * Note that a set bit (1) indicates the property is TRUE
+ * (e.g. if bit 0 is set then the event is enabled).
+ * +-------------+-+-+-+
+ * |   Bits 31:3 |2|1|0|
+ * +-------------+-+-+-+
+ *          |     | | |
+ *          |     | | +- Enabled?
+ *          |     | +--- Enabled for wake?
+ *          |     +----- Set?
+ *          +----------- <Reserved>
+ */
+typedef u32 acpi_event_status;
+
+#define ACPI_EVENT_FLAG_DISABLED        (acpi_event_status) 0x00
+#define ACPI_EVENT_FLAG_ENABLED         (acpi_event_status) 0x01
+#define ACPI_EVENT_FLAG_WAKE_ENABLED    (acpi_event_status) 0x02
+#define ACPI_EVENT_FLAG_SET             (acpi_event_status) 0x04
+#define ACPI_EVENT_FLAG_HANDLE		(acpi_event_status) 0x08
+
+/*
+ * General Purpose Events (GPE)
+ */
+#define ACPI_GPE_INVALID                0xFF
+#define ACPI_GPE_MAX                    0xFF
+#define ACPI_NUM_GPE                    256
+
+/* Actions for acpi_set_gpe_wake_mask, acpi_hw_low_set_gpe */
+
+#define ACPI_GPE_ENABLE                 0
+#define ACPI_GPE_DISABLE                1
+#define ACPI_GPE_CONDITIONAL_ENABLE     2
+
+/*
+ * GPE info flags - Per GPE
+ * +-------+-+-+---+
+ * |  7:4  |3|2|1:0|
+ * +-------+-+-+---+
+ *     |    | |  |
+ *     |    | |  +-- Type of dispatch:to method, handler, notify, or none
+ *     |    | +----- Interrupt type: edge or level triggered
+ *     |    +------- Is a Wake GPE
+ *     +------------ <Reserved>
+ */
+#define ACPI_GPE_DISPATCH_NONE          (u8) 0x00
+#define ACPI_GPE_DISPATCH_METHOD        (u8) 0x01
+#define ACPI_GPE_DISPATCH_HANDLER       (u8) 0x02
+#define ACPI_GPE_DISPATCH_NOTIFY        (u8) 0x03
+#define ACPI_GPE_DISPATCH_MASK          (u8) 0x03
+
+#define ACPI_GPE_LEVEL_TRIGGERED        (u8) 0x04
+#define ACPI_GPE_EDGE_TRIGGERED         (u8) 0x00
+#define ACPI_GPE_XRUPT_TYPE_MASK        (u8) 0x04
+
+#define ACPI_GPE_CAN_WAKE               (u8) 0x08
+
+/*
+ * Flags for GPE and Lock interfaces
+ */
+#define ACPI_NOT_ISR                    0x1
+#define ACPI_ISR                        0x0
+
+/* Notify types */
+
+#define ACPI_SYSTEM_NOTIFY              0x1
+#define ACPI_DEVICE_NOTIFY              0x2
+#define ACPI_ALL_NOTIFY                 (ACPI_SYSTEM_NOTIFY | ACPI_DEVICE_NOTIFY)
+#define ACPI_MAX_NOTIFY_HANDLER_TYPE    0x3
+
+#define ACPI_MAX_SYS_NOTIFY             0x7F
+#define ACPI_MAX_DEVICE_SPECIFIC_NOTIFY 0xBF
+
+/* Address Space (Operation Region) Types */
+
+typedef u8 acpi_adr_space_type;
+
+#define ACPI_ADR_SPACE_SYSTEM_MEMORY    (acpi_adr_space_type) 0
+#define ACPI_ADR_SPACE_SYSTEM_IO        (acpi_adr_space_type) 1
+#define ACPI_ADR_SPACE_PCI_CONFIG       (acpi_adr_space_type) 2
+#define ACPI_ADR_SPACE_EC               (acpi_adr_space_type) 3
+#define ACPI_ADR_SPACE_SMBUS            (acpi_adr_space_type) 4
+#define ACPI_ADR_SPACE_CMOS             (acpi_adr_space_type) 5
+#define ACPI_ADR_SPACE_PCI_BAR_TARGET   (acpi_adr_space_type) 6
+#define ACPI_ADR_SPACE_IPMI             (acpi_adr_space_type) 7
+#define ACPI_ADR_SPACE_GPIO             (acpi_adr_space_type) 8
+#define ACPI_ADR_SPACE_GSBUS            (acpi_adr_space_type) 9
+
+#define ACPI_NUM_PREDEFINED_REGIONS     10
+
+/*
+ * Special Address Spaces
+ *
+ * Note: A Data Table region is a special type of operation region
+ * that has its own AML opcode. However, internally, the AML
+ * interpreter simply creates an operation region with an an address
+ * space type of ACPI_ADR_SPACE_DATA_TABLE.
+ */
+#define ACPI_ADR_SPACE_DATA_TABLE       (acpi_adr_space_type) 0x7E	/* Internal to ACPICA only */
+#define ACPI_ADR_SPACE_FIXED_HARDWARE   (acpi_adr_space_type) 0x7F
+
+/* Values for _REG connection code */
+
+#define ACPI_REG_DISCONNECT             0
+#define ACPI_REG_CONNECT                1
+
+/*
+ * bit_register IDs
+ *
+ * These values are intended to be used by the hardware interfaces
+ * and are mapped to individual bitfields defined within the ACPI
+ * registers. See the acpi_gbl_bit_register_info global table in utglobal.c
+ * for this mapping.
+ */
+
+/* PM1 Status register */
+
+#define ACPI_BITREG_TIMER_STATUS                0x00
+#define ACPI_BITREG_BUS_MASTER_STATUS           0x01
+#define ACPI_BITREG_GLOBAL_LOCK_STATUS          0x02
+#define ACPI_BITREG_POWER_BUTTON_STATUS         0x03
+#define ACPI_BITREG_SLEEP_BUTTON_STATUS         0x04
+#define ACPI_BITREG_RT_CLOCK_STATUS             0x05
+#define ACPI_BITREG_WAKE_STATUS                 0x06
+#define ACPI_BITREG_PCIEXP_WAKE_STATUS          0x07
+
+/* PM1 Enable register */
+
+#define ACPI_BITREG_TIMER_ENABLE                0x08
+#define ACPI_BITREG_GLOBAL_LOCK_ENABLE          0x09
+#define ACPI_BITREG_POWER_BUTTON_ENABLE         0x0A
+#define ACPI_BITREG_SLEEP_BUTTON_ENABLE         0x0B
+#define ACPI_BITREG_RT_CLOCK_ENABLE             0x0C
+#define ACPI_BITREG_PCIEXP_WAKE_DISABLE         0x0D
+
+/* PM1 Control register */
+
+#define ACPI_BITREG_SCI_ENABLE                  0x0E
+#define ACPI_BITREG_BUS_MASTER_RLD              0x0F
+#define ACPI_BITREG_GLOBAL_LOCK_RELEASE         0x10
+#define ACPI_BITREG_SLEEP_TYPE                  0x11
+#define ACPI_BITREG_SLEEP_ENABLE                0x12
+
+/* PM2 Control register */
+
+#define ACPI_BITREG_ARB_DISABLE                 0x13
+
+#define ACPI_BITREG_MAX                         0x13
+#define ACPI_NUM_BITREG                         ACPI_BITREG_MAX + 1
+
+/* Status register values. A 1 clears a status bit. 0 = no effect */
+
+#define ACPI_CLEAR_STATUS                       1
+
+/* Enable and Control register values */
+
+#define ACPI_ENABLE_EVENT                       1
+#define ACPI_DISABLE_EVENT                      0
+
+/* Sleep function dispatch */
+
+typedef acpi_status(*ACPI_SLEEP_FUNCTION) (u8 sleep_state, u8 flags);
+
+struct acpi_sleep_functions {
+	ACPI_SLEEP_FUNCTION legacy_function;
+	ACPI_SLEEP_FUNCTION extended_function;
+};
+
+/*
+ * External ACPI object definition
+ */
+
+/*
+ * Note: Type == ACPI_TYPE_ANY (0) is used to indicate a NULL package element
+ * or an unresolved named reference.
+ */
+union acpi_object {
+	acpi_object_type type;	/* See definition of acpi_ns_type for values */
+	struct {
+		acpi_object_type type;	/* ACPI_TYPE_INTEGER */
+		u64 value;	/* The actual number */
+	} integer;
+
+	struct {
+		acpi_object_type type;	/* ACPI_TYPE_STRING */
+		u32 length;	/* # of bytes in string, excluding trailing null */
+		char *pointer;	/* points to the string value */
+	} string;
+
+	struct {
+		acpi_object_type type;	/* ACPI_TYPE_BUFFER */
+		u32 length;	/* # of bytes in buffer */
+		u8 *pointer;	/* points to the buffer */
+	} buffer;
+
+	struct {
+		acpi_object_type type;	/* ACPI_TYPE_PACKAGE */
+		u32 count;	/* # of elements in package */
+		union acpi_object *elements;	/* Pointer to an array of ACPI_OBJECTs */
+	} package;
+
+	struct {
+		acpi_object_type type;	/* ACPI_TYPE_LOCAL_REFERENCE */
+		acpi_object_type actual_type;	/* Type associated with the Handle */
+		acpi_handle handle;	/* object reference */
+	} reference;
+
+	struct {
+		acpi_object_type type;	/* ACPI_TYPE_PROCESSOR */
+		u32 proc_id;
+		acpi_io_address pblk_address;
+		u32 pblk_length;
+	} processor;
+
+	struct {
+		acpi_object_type type;	/* ACPI_TYPE_POWER */
+		u32 system_level;
+		u32 resource_order;
+	} power_resource;
+};
+
+/*
+ * List of objects, used as a parameter list for control method evaluation
+ */
+struct acpi_object_list {
+	u32 count;
+	union acpi_object *pointer;
+};
+
+/*
+ * Miscellaneous common Data Structures used by the interfaces
+ */
+#define ACPI_NO_BUFFER              0
+#define ACPI_ALLOCATE_BUFFER        (acpi_size) (-1)
+#define ACPI_ALLOCATE_LOCAL_BUFFER  (acpi_size) (-2)
+
+struct acpi_buffer {
+	acpi_size length;	/* Length in bytes of the buffer */
+	void *pointer;		/* pointer to buffer */
+};
+
+/*
+ * name_type for acpi_get_name
+ */
+#define ACPI_FULL_PATHNAME              0
+#define ACPI_SINGLE_NAME                1
+#define ACPI_NAME_TYPE_MAX              1
+
+/*
+ * Predefined Namespace items
+ */
+struct acpi_predefined_names {
+	char *name;
+	u8 type;
+	char *val;
+};
+
+/*
+ * Structure and flags for acpi_get_system_info
+ */
+#define ACPI_SYS_MODE_UNKNOWN           0x0000
+#define ACPI_SYS_MODE_ACPI              0x0001
+#define ACPI_SYS_MODE_LEGACY            0x0002
+#define ACPI_SYS_MODES_MASK             0x0003
+
+/*
+ * System info returned by acpi_get_system_info()
+ */
+struct acpi_system_info {
+	u32 acpi_ca_version;
+	u32 flags;
+	u32 timer_resolution;
+	u32 reserved1;
+	u32 reserved2;
+	u32 debug_level;
+	u32 debug_layer;
+};
+
+/* Table Event Types */
+
+#define ACPI_TABLE_EVENT_LOAD           0x0
+#define ACPI_TABLE_EVENT_UNLOAD         0x1
+#define ACPI_NUM_TABLE_EVENTS           2
+
+/*
+ * Types specific to the OS service interfaces
+ */
+typedef u32(ACPI_SYSTEM_XFACE * acpi_osd_handler) (void *context);
+
+typedef void
+ (ACPI_SYSTEM_XFACE * acpi_osd_exec_callback) (void *context);
+
+/*
+ * Various handlers and callback procedures
+ */
+typedef
+void (*ACPI_GBL_EVENT_HANDLER) (u32 event_type,
+			       acpi_handle device,
+			       u32 event_number, void *context);
+
+#define ACPI_EVENT_TYPE_GPE         0
+#define ACPI_EVENT_TYPE_FIXED       1
+
+typedef u32(*acpi_event_handler) (void *context);
+
+typedef
+u32 (*acpi_gpe_handler) (acpi_handle gpe_device, u32 gpe_number, void *context);
+
+typedef
+void (*acpi_notify_handler) (acpi_handle device, u32 value, void *context);
+
+typedef
+void (*acpi_object_handler) (acpi_handle object, void *data);
+
+typedef acpi_status(*acpi_init_handler) (acpi_handle object, u32 function);
+
+#define ACPI_INIT_DEVICE_INI        1
+
+typedef
+acpi_status(*acpi_exception_handler) (acpi_status aml_status,
+				      acpi_name name,
+				      u16 opcode,
+				      u32 aml_offset, void *context);
+
+/* Table Event handler (Load, load_table, etc.) and types */
+
+typedef
+acpi_status(*acpi_tbl_handler) (u32 event, void *table, void *context);
+
+/* Address Spaces (For Operation Regions) */
+
+typedef
+acpi_status(*acpi_adr_space_handler) (u32 function,
+				      acpi_physical_address address,
+				      u32 bit_width,
+				      u64 *value,
+				      void *handler_context,
+				      void *region_context);
+
+#define ACPI_DEFAULT_HANDLER            NULL
+
+/* Special Context data for generic_serial_bus/general_purpose_io (ACPI 5.0) */
+
+struct acpi_connection_info {
+	u8 *connection;
+	u16 length;
+	u8 access_length;
+};
+
+typedef
+acpi_status(*acpi_adr_space_setup) (acpi_handle region_handle,
+				    u32 function,
+				    void *handler_context,
+				    void **region_context);
+
+#define ACPI_REGION_ACTIVATE    0
+#define ACPI_REGION_DEACTIVATE  1
+
+typedef
+acpi_status(*acpi_walk_callback) (acpi_handle object,
+				  u32 nesting_level,
+				  void *context, void **return_value);
+
+typedef
+u32 (*acpi_interface_handler) (acpi_string interface_name, u32 supported);
+
+/* Interrupt handler return values */
+
+#define ACPI_INTERRUPT_NOT_HANDLED      0x00
+#define ACPI_INTERRUPT_HANDLED          0x01
+
+/* GPE handler return values */
+
+#define ACPI_REENABLE_GPE               0x80
+
+/* Length of 32-bit EISAID values when converted back to a string */
+
+#define ACPI_EISAID_STRING_SIZE         8	/* Includes null terminator */
+
+/* Length of UUID (string) values */
+
+#define ACPI_UUID_LENGTH                16
+
+/* Structures used for device/processor HID, UID, CID */
+
+struct acpica_device_id {
+	u32 length;		/* Length of string + null */
+	char *string;
+};
+
+struct acpica_device_id_list {
+	u32 count;		/* Number of IDs in Ids array */
+	u32 list_size;		/* Size of list, including ID strings */
+	struct acpica_device_id ids[1];	/* ID array */
+};
+
+/*
+ * Structure returned from acpi_get_object_info.
+ * Optimized for both 32- and 64-bit builds
+ */
+struct acpi_device_info {
+	u32 info_size;		/* Size of info, including ID strings */
+	u32 name;		/* ACPI object Name */
+	acpi_object_type type;	/* ACPI object Type */
+	u8 param_count;		/* If a method, required parameter count */
+	u8 valid;		/* Indicates which optional fields are valid */
+	u8 flags;		/* Miscellaneous info */
+	u8 highest_dstates[4];	/* _sx_d values: 0xFF indicates not valid */
+	u8 lowest_dstates[5];	/* _sx_w values: 0xFF indicates not valid */
+	u32 current_status;	/* _STA value */
+	u64 address;	/* _ADR value */
+	struct acpica_device_id hardware_id;	/* _HID value */
+	struct acpica_device_id unique_id;	/* _UID value */
+	struct acpica_device_id_list compatible_id_list;	/* _CID list <must be last> */
+};
+
+/* Values for Flags field above (acpi_get_object_info) */
+
+#define ACPI_PCI_ROOT_BRIDGE            0x01
+
+/* Flags for Valid field above (acpi_get_object_info) */
+
+#define ACPI_VALID_STA                  0x01
+#define ACPI_VALID_ADR                  0x02
+#define ACPI_VALID_HID                  0x04
+#define ACPI_VALID_UID                  0x08
+#define ACPI_VALID_CID                  0x10
+#define ACPI_VALID_SXDS                 0x20
+#define ACPI_VALID_SXWS                 0x40
+
+/* Flags for _STA method */
+
+#define ACPI_STA_DEVICE_PRESENT         0x01
+#define ACPI_STA_DEVICE_ENABLED         0x02
+#define ACPI_STA_DEVICE_UI              0x04
+#define ACPI_STA_DEVICE_FUNCTIONING     0x08
+#define ACPI_STA_DEVICE_OK              0x08	/* Synonym */
+#define ACPI_STA_BATTERY_PRESENT        0x10
+
+/* Context structs for address space handlers */
+
+struct acpi_pci_id {
+	u16 segment;
+	u16 bus;
+	u16 device;
+	u16 function;
+};
+
+struct acpi_mem_space_context {
+	u32 length;
+	acpi_physical_address address;
+	acpi_physical_address mapped_physical_address;
+	u8 *mapped_logical_address;
+	acpi_size mapped_length;
+};
+
+/*
+ * struct acpi_memory_list is used only if the ACPICA local cache is enabled
+ */
+struct acpi_memory_list {
+	char *list_name;
+	void *list_head;
+	u16 object_size;
+	u16 max_depth;
+	u16 current_depth;
+	u16 link_offset;
+
+#ifdef ACPI_DBG_TRACK_ALLOCATIONS
+
+	/* Statistics for debug memory tracking only */
+
+	u32 total_allocated;
+	u32 total_freed;
+	u32 max_occupied;
+	u32 total_size;
+	u32 current_total_size;
+	u32 requests;
+	u32 hits;
+#endif
+};
+
+#endif				/* __ACTYPES_H__ */
diff --git a/include/acpi/apei.h b/include/acpi/apei.h
new file mode 100644
index 00000000..04f349d8
--- /dev/null
+++ b/include/acpi/apei.h
@@ -0,0 +1,46 @@
+/*
+ * apei.h - ACPI Platform Error Interface
+ */
+
+#ifndef ACPI_APEI_H
+#define ACPI_APEI_H
+
+#include <linux/acpi.h>
+#include <linux/cper.h>
+#include <asm/ioctls.h>
+
+#define APEI_ERST_INVALID_RECORD_ID	0xffffffffffffffffULL
+
+#define APEI_ERST_CLEAR_RECORD		_IOW('E', 1, u64)
+#define APEI_ERST_GET_RECORD_COUNT	_IOR('E', 2, u32)
+
+#ifdef __KERNEL__
+
+extern bool hest_disable;
+extern int erst_disable;
+#ifdef CONFIG_ACPI_APEI_GHES
+extern bool ghes_disable;
+#else
+#define ghes_disable 1
+#endif
+
+#ifdef CONFIG_ACPI_APEI
+void __init acpi_hest_init(void);
+#else
+static inline void acpi_hest_init(void) { return; }
+#endif
+
+typedef int (*apei_hest_func_t)(struct acpi_hest_header *hest_hdr, void *data);
+int apei_hest_parse(apei_hest_func_t func, void *data);
+
+int erst_write(const struct cper_record_header *record);
+ssize_t erst_get_record_count(void);
+int erst_get_record_id_begin(int *pos);
+int erst_get_record_id_next(int *pos, u64 *record_id);
+void erst_get_record_id_end(void);
+ssize_t erst_read(u64 record_id, struct cper_record_header *record,
+		  size_t buflen);
+int erst_clear(u64 record_id);
+
+#endif
+#endif
diff --git a/include/acpi/button.h b/include/acpi/button.h
new file mode 100644
index 00000000..97eea0e4
--- /dev/null
+++ b/include/acpi/button.h
@@ -0,0 +1,25 @@
+#ifndef ACPI_BUTTON_H
+#define ACPI_BUTTON_H
+
+#include <linux/notifier.h>
+
+#if defined(CONFIG_ACPI_BUTTON) || defined(CONFIG_ACPI_BUTTON_MODULE)
+extern int acpi_lid_notifier_register(struct notifier_block *nb);
+extern int acpi_lid_notifier_unregister(struct notifier_block *nb);
+extern int acpi_lid_open(void);
+#else
+static inline int acpi_lid_notifier_register(struct notifier_block *nb)
+{
+	return 0;
+}
+static inline int acpi_lid_notifier_unregister(struct notifier_block *nb)
+{
+	return 0;
+}
+static inline int acpi_lid_open(void)
+{
+	return 1;
+}
+#endif /* defined(CONFIG_ACPI_BUTTON) || defined(CONFIG_ACPI_BUTTON_MODULE) */
+
+#endif /* ACPI_BUTTON_H */
diff --git a/include/acpi/container.h b/include/acpi/container.h
new file mode 100644
index 00000000..a703f14e
--- /dev/null
+++ b/include/acpi/container.h
@@ -0,0 +1,12 @@
+#ifndef __ACPI_CONTAINER_H
+#define __ACPI_CONTAINER_H
+
+#include <linux/kernel.h>
+
+struct acpi_container {
+	acpi_handle handle;
+	unsigned long sun;
+	int state;
+};
+
+#endif				/* __ACPI_CONTAINER_H */
diff --git a/include/acpi/hed.h b/include/acpi/hed.h
new file mode 100644
index 00000000..46e1249b
--- /dev/null
+++ b/include/acpi/hed.h
@@ -0,0 +1,18 @@
+/*
+ * hed.h - ACPI Hardware Error Device
+ *
+ * Copyright (C) 2009, Intel Corp.
+ *	Author: Huang Ying <ying.huang@intel.com>
+ *
+ * This file is released under the GPLv2.
+ */
+
+#ifndef ACPI_HED_H
+#define ACPI_HED_H
+
+#include <linux/notifier.h>
+
+int register_acpi_hed_notifier(struct notifier_block *nb);
+void unregister_acpi_hed_notifier(struct notifier_block *nb);
+
+#endif
diff --git a/include/acpi/pdc_intel.h b/include/acpi/pdc_intel.h
new file mode 100644
index 00000000..552637b0
--- /dev/null
+++ b/include/acpi/pdc_intel.h
@@ -0,0 +1,35 @@
+
+/* _PDC bit definition for Intel processors */
+
+#ifndef __PDC_INTEL_H__
+#define __PDC_INTEL_H__
+
+#define ACPI_PDC_P_FFH			(0x0001)
+#define ACPI_PDC_C_C1_HALT		(0x0002)
+#define ACPI_PDC_T_FFH			(0x0004)
+#define ACPI_PDC_SMP_C1PT		(0x0008)
+#define ACPI_PDC_SMP_C2C3		(0x0010)
+#define ACPI_PDC_SMP_P_SWCOORD		(0x0020)
+#define ACPI_PDC_SMP_C_SWCOORD		(0x0040)
+#define ACPI_PDC_SMP_T_SWCOORD		(0x0080)
+#define ACPI_PDC_C_C1_FFH		(0x0100)
+#define ACPI_PDC_C_C2C3_FFH		(0x0200)
+#define ACPI_PDC_SMP_P_HWCOORD		(0x0800)
+
+#define ACPI_PDC_EST_CAPABILITY_SMP	(ACPI_PDC_SMP_C1PT | \
+					 ACPI_PDC_C_C1_HALT | \
+					 ACPI_PDC_P_FFH)
+
+#define ACPI_PDC_EST_CAPABILITY_SWSMP	(ACPI_PDC_SMP_C1PT | \
+					 ACPI_PDC_C_C1_HALT | \
+					 ACPI_PDC_SMP_P_SWCOORD | \
+					 ACPI_PDC_SMP_P_HWCOORD | \
+					 ACPI_PDC_P_FFH)
+
+#define ACPI_PDC_C_CAPABILITY_SMP	(ACPI_PDC_SMP_C2C3  | \
+					 ACPI_PDC_SMP_C1PT  | \
+					 ACPI_PDC_C_C1_HALT | \
+					 ACPI_PDC_C_C1_FFH  | \
+					 ACPI_PDC_C_C2C3_FFH)
+
+#endif				/* __PDC_INTEL_H__ */
diff --git a/include/acpi/platform/acenv.h b/include/acpi/platform/acenv.h
new file mode 100644
index 00000000..5af3ed52
--- /dev/null
+++ b/include/acpi/platform/acenv.h
@@ -0,0 +1,380 @@
+/******************************************************************************
+ *
+ * Name: acenv.h - Generation environment specific items
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2011, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACENV_H__
+#define __ACENV_H__
+
+/* Types for ACPI_MUTEX_TYPE */
+
+#define ACPI_BINARY_SEMAPHORE       0
+#define ACPI_OSL_MUTEX              1
+
+/* Types for DEBUGGER_THREADING */
+
+#define DEBUGGER_SINGLE_THREADED    0
+#define DEBUGGER_MULTI_THREADED     1
+
+/******************************************************************************
+ *
+ * Configuration for ACPI tools and utilities
+ *
+ *****************************************************************************/
+
+#ifdef ACPI_LIBRARY
+/*
+ * Note: The non-debug version of the acpi_library does not contain any
+ * debug support, for minimal size. The debug version uses ACPI_FULL_DEBUG
+ */
+#define ACPI_USE_LOCAL_CACHE
+#endif
+
+#ifdef ACPI_ASL_COMPILER
+#define ACPI_DEBUG_OUTPUT
+#define ACPI_APPLICATION
+#define ACPI_DISASSEMBLER
+#define ACPI_CONSTANT_EVAL_ONLY
+#define ACPI_LARGE_NAMESPACE_NODE
+#define ACPI_DATA_TABLE_DISASSEMBLY
+#endif
+
+#ifdef ACPI_EXEC_APP
+#undef DEBUGGER_THREADING
+#define DEBUGGER_THREADING      DEBUGGER_SINGLE_THREADED
+#define ACPI_FULL_DEBUG
+#define ACPI_APPLICATION
+#define ACPI_DEBUGGER
+#define ACPI_MUTEX_DEBUG
+#define ACPI_DBG_TRACK_ALLOCATIONS
+#endif
+
+#ifdef ACPI_APPLICATION
+#define ACPI_USE_SYSTEM_CLIBRARY
+#define ACPI_USE_LOCAL_CACHE
+#endif
+
+#ifdef ACPI_FULL_DEBUG
+#define ACPI_DEBUGGER
+#define ACPI_DEBUG_OUTPUT
+#define ACPI_DISASSEMBLER
+#endif
+
+/*
+ * Environment configuration.  The purpose of this file is to interface to the
+ * local generation environment.
+ *
+ * 1) ACPI_USE_SYSTEM_CLIBRARY - Define this if linking to an actual C library.
+ *      Otherwise, local versions of string/memory functions will be used.
+ * 2) ACPI_USE_STANDARD_HEADERS - Define this if linking to a C library and
+ *      the standard header files may be used.
+ *
+ * The ACPI subsystem only uses low level C library functions that do not call
+ * operating system services and may therefore be inlined in the code.
+ *
+ * It may be necessary to tailor these include files to the target
+ * generation environment.
+ *
+ *
+ * Functions and constants used from each header:
+ *
+ * string.h:    memcpy
+ *              memset
+ *              strcat
+ *              strcmp
+ *              strcpy
+ *              strlen
+ *              strncmp
+ *              strncat
+ *              strncpy
+ *
+ * stdlib.h:    strtoul
+ *
+ * stdarg.h:    va_list
+ *              va_arg
+ *              va_start
+ *              va_end
+ *
+ */
+
+/*! [Begin] no source code translation */
+
+#if defined(_LINUX) || defined(__linux__)
+#include "aclinux.h"
+
+#elif defined(_AED_EFI)
+#include "acefi.h"
+
+#elif defined(WIN32)
+#include "acwin.h"
+
+#elif defined(WIN64)
+#include "acwin64.h"
+
+#elif defined(MSDOS)		/* Must appear after WIN32 and WIN64 check */
+#include "acdos16.h"
+
+#elif defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
+#include "acfreebsd.h"
+
+#elif defined(__NetBSD__)
+#include "acnetbsd.h"
+
+#elif defined(MODESTO)
+#include "acmodesto.h"
+
+#elif defined(NETWARE)
+#include "acnetware.h"
+
+#elif defined(__sun)
+#include "acsolaris.h"
+
+#else
+
+/* All other environments */
+
+#define ACPI_USE_STANDARD_HEADERS
+
+#define COMPILER_DEPENDENT_INT64   long long
+#define COMPILER_DEPENDENT_UINT64  unsigned long long
+
+#endif
+
+/*! [End] no source code translation !*/
+
+/******************************************************************************
+ *
+ * Miscellaneous configuration
+ *
+ *****************************************************************************/
+
+/*
+ * Are mutexes supported by the host? default is no, use binary semaphores.
+ */
+#ifndef ACPI_MUTEX_TYPE
+#define ACPI_MUTEX_TYPE             ACPI_BINARY_SEMAPHORE
+#endif
+
+/* "inline" keywords - configurable since inline is not standardized */
+
+#ifndef ACPI_INLINE
+#define ACPI_INLINE
+#endif
+
+/*
+ * Debugger threading model
+ * Use single threaded if the entire subsystem is contained in an application
+ * Use multiple threaded when the subsystem is running in the kernel.
+ *
+ * By default the model is single threaded if ACPI_APPLICATION is set,
+ * multi-threaded if ACPI_APPLICATION is not set.
+ */
+#ifndef DEBUGGER_THREADING
+#ifdef ACPI_APPLICATION
+#define DEBUGGER_THREADING          DEBUGGER_SINGLE_THREADED
+
+#else
+#define DEBUGGER_THREADING          DEBUGGER_MULTI_THREADED
+#endif
+#endif				/* !DEBUGGER_THREADING */
+
+/******************************************************************************
+ *
+ * C library configuration
+ *
+ *****************************************************************************/
+
+#define ACPI_IS_ASCII(c)  ((c) < 0x80)
+
+#ifdef ACPI_USE_SYSTEM_CLIBRARY
+/*
+ * Use the standard C library headers.
+ * We want to keep these to a minimum.
+ */
+#ifdef ACPI_USE_STANDARD_HEADERS
+/*
+ * Use the standard headers from the standard locations
+ */
+#include <stdarg.h>
+#include <stdlib.h>
+#include <string.h>
+#include <ctype.h>
+
+#endif				/* ACPI_USE_STANDARD_HEADERS */
+
+/*
+ * We will be linking to the standard Clib functions
+ */
+#define ACPI_STRSTR(s1,s2)      strstr((s1), (s2))
+#define ACPI_STRCHR(s1,c)       strchr((s1), (c))
+#define ACPI_STRLEN(s)          (acpi_size) strlen((s))
+#define ACPI_STRCPY(d,s)        (void) strcpy((d), (s))
+#define ACPI_STRNCPY(d,s,n)     (void) strncpy((d), (s), (acpi_size)(n))
+#define ACPI_STRNCMP(d,s,n)     strncmp((d), (s), (acpi_size)(n))
+#define ACPI_STRCMP(d,s)        strcmp((d), (s))
+#define ACPI_STRCAT(d,s)        (void) strcat((d), (s))
+#define ACPI_STRNCAT(d,s,n)     strncat((d), (s), (acpi_size)(n))
+#define ACPI_STRTOUL(d,s,n)     strtoul((d), (s), (acpi_size)(n))
+#define ACPI_MEMCMP(s1,s2,n)    memcmp((const char *)(s1), (const char *)(s2), (acpi_size)(n))
+#define ACPI_MEMCPY(d,s,n)      (void) memcpy((d), (s), (acpi_size)(n))
+#define ACPI_MEMSET(d,s,n)      (void) memset((d), (s), (acpi_size)(n))
+
+#define ACPI_TOUPPER(i)         toupper((int) (i))
+#define ACPI_TOLOWER(i)         tolower((int) (i))
+#define ACPI_IS_XDIGIT(i)       isxdigit((int) (i))
+#define ACPI_IS_DIGIT(i)        isdigit((int) (i))
+#define ACPI_IS_SPACE(i)        isspace((int) (i))
+#define ACPI_IS_UPPER(i)        isupper((int) (i))
+#define ACPI_IS_PRINT(i)        isprint((int) (i))
+#define ACPI_IS_ALPHA(i)        isalpha((int) (i))
+
+#else
+
+/******************************************************************************
+ *
+ * Not using native C library, use local implementations
+ *
+ *****************************************************************************/
+
+ /*
+  * Use local definitions of C library macros and functions
+  * NOTE: The function implementations may not be as efficient
+  * as an inline or assembly code implementation provided by a
+  * native C library.
+  */
+
+#ifndef va_arg
+
+#ifndef _VALIST
+#define _VALIST
+typedef char *va_list;
+#endif				/* _VALIST */
+
+/*
+ * Storage alignment properties
+ */
+#define  _AUPBND                (sizeof (acpi_native_int) - 1)
+#define  _ADNBND                (sizeof (acpi_native_int) - 1)
+
+/*
+ * Variable argument list macro definitions
+ */
+#define _bnd(X, bnd)            (((sizeof (X)) + (bnd)) & (~(bnd)))
+#define va_arg(ap, T)           (*(T *)(((ap) += (_bnd (T, _AUPBND))) - (_bnd (T,_ADNBND))))
+#define va_end(ap)              (void) 0
+#define va_start(ap, A)         (void) ((ap) = (((char *) &(A)) + (_bnd (A,_AUPBND))))
+
+#endif				/* va_arg */
+
+#define ACPI_STRSTR(s1,s2)      acpi_ut_strstr ((s1), (s2))
+#define ACPI_STRCHR(s1,c)       acpi_ut_strchr ((s1), (c))
+#define ACPI_STRLEN(s)          (acpi_size) acpi_ut_strlen ((s))
+#define ACPI_STRCPY(d,s)        (void) acpi_ut_strcpy ((d), (s))
+#define ACPI_STRNCPY(d,s,n)     (void) acpi_ut_strncpy ((d), (s), (acpi_size)(n))
+#define ACPI_STRNCMP(d,s,n)     acpi_ut_strncmp ((d), (s), (acpi_size)(n))
+#define ACPI_STRCMP(d,s)        acpi_ut_strcmp ((d), (s))
+#define ACPI_STRCAT(d,s)        (void) acpi_ut_strcat ((d), (s))
+#define ACPI_STRNCAT(d,s,n)     acpi_ut_strncat ((d), (s), (acpi_size)(n))
+#define ACPI_STRTOUL(d,s,n)     acpi_ut_strtoul ((d), (s), (acpi_size)(n))
+#define ACPI_MEMCMP(s1,s2,n)    acpi_ut_memcmp((const char *)(s1), (const char *)(s2), (acpi_size)(n))
+#define ACPI_MEMCPY(d,s,n)      (void) acpi_ut_memcpy ((d), (s), (acpi_size)(n))
+#define ACPI_MEMSET(d,v,n)      (void) acpi_ut_memset ((d), (v), (acpi_size)(n))
+#define ACPI_TOUPPER(c)         acpi_ut_to_upper ((int) (c))
+#define ACPI_TOLOWER(c)         acpi_ut_to_lower ((int) (c))
+
+#endif				/* ACPI_USE_SYSTEM_CLIBRARY */
+
+/******************************************************************************
+ *
+ * Assembly code macros
+ *
+ *****************************************************************************/
+
+/*
+ * Handle platform- and compiler-specific assembly language differences.
+ * These should already have been defined by the platform includes above.
+ *
+ * Notes:
+ * 1) Interrupt 3 is used to break into a debugger
+ * 2) Interrupts are turned off during ACPI register setup
+ */
+
+/* Unrecognized compiler, use defaults */
+
+#ifndef ACPI_ASM_MACROS
+
+/*
+ * Calling conventions:
+ *
+ * ACPI_SYSTEM_XFACE        - Interfaces to host OS (handlers, threads)
+ * ACPI_EXTERNAL_XFACE      - External ACPI interfaces
+ * ACPI_INTERNAL_XFACE      - Internal ACPI interfaces
+ * ACPI_INTERNAL_VAR_XFACE  - Internal variable-parameter list interfaces
+ */
+#define ACPI_SYSTEM_XFACE
+#define ACPI_EXTERNAL_XFACE
+#define ACPI_INTERNAL_XFACE
+#define ACPI_INTERNAL_VAR_XFACE
+
+#define ACPI_ASM_MACROS
+#define BREAKPOINT3
+#define ACPI_DISABLE_IRQS()
+#define ACPI_ENABLE_IRQS()
+#define ACPI_ACQUIRE_GLOBAL_LOCK(Glptr, acq)
+#define ACPI_RELEASE_GLOBAL_LOCK(Glptr, acq)
+
+#endif				/* ACPI_ASM_MACROS */
+
+#ifdef ACPI_APPLICATION
+
+/* Don't want software interrupts within a ring3 application */
+
+#undef BREAKPOINT3
+#define BREAKPOINT3
+#endif
+
+/******************************************************************************
+ *
+ * Compiler-specific information is contained in the compiler-specific
+ * headers.
+ *
+ *****************************************************************************/
+#endif				/* __ACENV_H__ */
diff --git a/include/acpi/platform/acgcc.h b/include/acpi/platform/acgcc.h
new file mode 100644
index 00000000..e2288935
--- /dev/null
+++ b/include/acpi/platform/acgcc.h
@@ -0,0 +1,71 @@
+/******************************************************************************
+ *
+ * Name: acgcc.h - GCC specific defines, etc.
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2011, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACGCC_H__
+#define __ACGCC_H__
+
+#define ACPI_INLINE             __inline__
+
+/* Function name is used for debug output. Non-ANSI, compiler-dependent */
+
+#define ACPI_GET_FUNCTION_NAME          __func__
+
+/*
+ * This macro is used to tag functions as "printf-like" because
+ * some compilers (like GCC) can catch printf format string problems.
+ */
+#define ACPI_PRINTF_LIKE(c) __attribute__ ((__format__ (__printf__, c, c+1)))
+
+/*
+ * Some compilers complain about unused variables. Sometimes we don't want to
+ * use all the variables (for example, _acpi_module_name). This allows us
+ * to tell the compiler warning in a per-variable manner that a variable
+ * is unused.
+ */
+#define ACPI_UNUSED_VAR __attribute__ ((unused))
+
+#ifdef _ANSI
+#define inline
+#endif
+
+#endif				/* __ACGCC_H__ */
diff --git a/include/acpi/platform/aclinux.h b/include/acpi/platform/aclinux.h
new file mode 100644
index 00000000..6fbc4cab
--- /dev/null
+++ b/include/acpi/platform/aclinux.h
@@ -0,0 +1,180 @@
+/******************************************************************************
+ *
+ * Name: aclinux.h - OS specific defines, etc. for Linux
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2011, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACLINUX_H__
+#define __ACLINUX_H__
+
+/* Common (in-kernel/user-space) ACPICA configuration */
+
+#define ACPI_USE_SYSTEM_CLIBRARY
+#define ACPI_USE_DO_WHILE_0
+#define ACPI_MUTEX_TYPE             ACPI_BINARY_SEMAPHORE
+
+
+#ifdef __KERNEL__
+
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/sched.h>
+#include <linux/atomic.h>
+#include <asm/div64.h>
+#include <asm/acpi.h>
+#include <linux/slab.h>
+#include <linux/spinlock_types.h>
+#include <asm/current.h>
+
+/* Host-dependent types and defines for in-kernel ACPICA */
+
+#define ACPI_MACHINE_WIDTH          BITS_PER_LONG
+#define ACPI_EXPORT_SYMBOL(symbol)  EXPORT_SYMBOL(symbol);
+#define strtoul                     simple_strtoul
+
+#define acpi_cache_t                        struct kmem_cache
+#define acpi_spinlock                       spinlock_t *
+#define acpi_cpu_flags                      unsigned long
+
+#else /* !__KERNEL__ */
+
+#include <stdarg.h>
+#include <string.h>
+#include <stdlib.h>
+#include <ctype.h>
+#include <unistd.h>
+
+/* Host-dependent types and defines for user-space ACPICA */
+
+#define ACPI_FLUSH_CPU_CACHE()
+#define ACPI_CAST_PTHREAD_T(pthread) ((acpi_thread_id) (pthread))
+
+#if defined(__ia64__) || defined(__x86_64__)
+#define ACPI_MACHINE_WIDTH          64
+#define COMPILER_DEPENDENT_INT64    long
+#define COMPILER_DEPENDENT_UINT64   unsigned long
+#else
+#define ACPI_MACHINE_WIDTH          32
+#define COMPILER_DEPENDENT_INT64    long long
+#define COMPILER_DEPENDENT_UINT64   unsigned long long
+#define ACPI_USE_NATIVE_DIVIDE
+#endif
+
+#ifndef __cdecl
+#define __cdecl
+#endif
+
+#endif /* __KERNEL__ */
+
+/* Linux uses GCC */
+
+#include "acgcc.h"
+
+
+#ifdef __KERNEL__
+#include <acpi/actypes.h>
+/*
+ * Overrides for in-kernel ACPICA
+ */
+static inline acpi_thread_id acpi_os_get_thread_id(void)
+{
+	return (acpi_thread_id)(unsigned long)current;
+}
+
+/*
+ * The irqs_disabled() check is for resume from RAM.
+ * Interrupts are off during resume, just like they are for boot.
+ * However, boot has  (system_state != SYSTEM_RUNNING)
+ * to quiet __might_sleep() in kmalloc() and resume does not.
+ */
+static inline void *acpi_os_allocate(acpi_size size)
+{
+	return kmalloc(size, irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL);
+}
+
+static inline void *acpi_os_allocate_zeroed(acpi_size size)
+{
+	return kzalloc(size, irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL);
+}
+
+static inline void *acpi_os_acquire_object(acpi_cache_t * cache)
+{
+	return kmem_cache_zalloc(cache,
+		irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL);
+}
+
+#define ACPI_ALLOCATE(a)        acpi_os_allocate(a)
+#define ACPI_ALLOCATE_ZEROED(a) acpi_os_allocate_zeroed(a)
+#define ACPI_FREE(a)            kfree(a)
+
+#ifndef CONFIG_PREEMPT
+/*
+ * Used within ACPICA to show where it is safe to preempt execution
+ * when CONFIG_PREEMPT=n
+ */
+#define ACPI_PREEMPTION_POINT() \
+	do { \
+		if (!irqs_disabled()) \
+			cond_resched(); \
+	} while (0)
+#endif
+
+/*
+ * When lockdep is enabled, the spin_lock_init() macro stringifies it's
+ * argument and uses that as a name for the lock in debugging.
+ * By executing spin_lock_init() in a macro the key changes from "lock" for
+ * all locks to the name of the argument of acpi_os_create_lock(), which
+ * prevents lockdep from reporting false positives for ACPICA locks.
+ */
+#define acpi_os_create_lock(__handle)				\
+({								\
+	spinlock_t *lock = ACPI_ALLOCATE(sizeof(*lock));	\
+								\
+	if (lock) {						\
+		*(__handle) = lock;				\
+		spin_lock_init(*(__handle));			\
+	}							\
+	lock ? AE_OK : AE_NO_MEMORY;				\
+})
+
+#endif /* __KERNEL__ */
+
+#endif /* __ACLINUX_H__ */
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
new file mode 100644
index 00000000..9d650476
--- /dev/null
+++ b/include/acpi/processor.h
@@ -0,0 +1,358 @@
+#ifndef __ACPI_PROCESSOR_H
+#define __ACPI_PROCESSOR_H
+
+#include <linux/kernel.h>
+#include <linux/cpu.h>
+#include <linux/cpuidle.h>
+#include <linux/thermal.h>
+#include <asm/acpi.h>
+
+#define ACPI_PROCESSOR_BUSY_METRIC	10
+
+#define ACPI_PROCESSOR_MAX_POWER	8
+#define ACPI_PROCESSOR_MAX_C2_LATENCY	100
+#define ACPI_PROCESSOR_MAX_C3_LATENCY	1000
+
+#define ACPI_PROCESSOR_MAX_THROTTLING	16
+#define ACPI_PROCESSOR_MAX_THROTTLE	250	/* 25% */
+#define ACPI_PROCESSOR_MAX_DUTY_WIDTH	4
+
+#define ACPI_PDC_REVISION_ID		0x1
+
+#define ACPI_PSD_REV0_REVISION		0	/* Support for _PSD as in ACPI 3.0 */
+#define ACPI_PSD_REV0_ENTRIES		5
+
+#define ACPI_TSD_REV0_REVISION		0	/* Support for _PSD as in ACPI 3.0 */
+#define ACPI_TSD_REV0_ENTRIES		5
+/*
+ * Types of coordination defined in ACPI 3.0. Same macros can be used across
+ * P, C and T states
+ */
+#define DOMAIN_COORD_TYPE_SW_ALL	0xfc
+#define DOMAIN_COORD_TYPE_SW_ANY	0xfd
+#define DOMAIN_COORD_TYPE_HW_ALL	0xfe
+
+#define ACPI_CSTATE_SYSTEMIO	0
+#define ACPI_CSTATE_FFH		1
+#define ACPI_CSTATE_HALT	2
+
+#define ACPI_CX_DESC_LEN	32
+
+/* Power Management */
+
+struct acpi_processor_cx;
+
+struct acpi_power_register {
+	u8 descriptor;
+	u16 length;
+	u8 space_id;
+	u8 bit_width;
+	u8 bit_offset;
+	u8 access_size;
+	u64 address;
+} __attribute__ ((packed));
+
+struct acpi_processor_cx {
+	u8 valid;
+	u8 type;
+	u32 address;
+	u8 entry_method;
+	u8 index;
+	u32 latency;
+	u32 latency_ticks;
+	u32 power;
+	u32 usage;
+	u64 time;
+	u8 bm_sts_skip;
+	char desc[ACPI_CX_DESC_LEN];
+};
+
+struct acpi_processor_power {
+	struct cpuidle_device dev;
+	struct acpi_processor_cx *state;
+	unsigned long bm_check_timestamp;
+	u32 default_state;
+	int count;
+	struct acpi_processor_cx states[ACPI_PROCESSOR_MAX_POWER];
+	int timer_broadcast_on_state;
+};
+
+/* Performance Management */
+
+struct acpi_psd_package {
+	u64 num_entries;
+	u64 revision;
+	u64 domain;
+	u64 coord_type;
+	u64 num_processors;
+} __attribute__ ((packed));
+
+struct acpi_pct_register {
+	u8 descriptor;
+	u16 length;
+	u8 space_id;
+	u8 bit_width;
+	u8 bit_offset;
+	u8 reserved;
+	u64 address;
+} __attribute__ ((packed));
+
+struct acpi_processor_px {
+	u64 core_frequency;	/* megahertz */
+	u64 power;	/* milliWatts */
+	u64 transition_latency;	/* microseconds */
+	u64 bus_master_latency;	/* microseconds */
+	u64 control;	/* control value */
+	u64 status;	/* success indicator */
+};
+
+struct acpi_processor_performance {
+	unsigned int state;
+	unsigned int platform_limit;
+	struct acpi_pct_register control_register;
+	struct acpi_pct_register status_register;
+	unsigned int state_count;
+	struct acpi_processor_px *states;
+	struct acpi_psd_package domain_info;
+	cpumask_var_t shared_cpu_map;
+	unsigned int shared_type;
+};
+
+/* Throttling Control */
+
+struct acpi_tsd_package {
+	u64 num_entries;
+	u64 revision;
+	u64 domain;
+	u64 coord_type;
+	u64 num_processors;
+} __attribute__ ((packed));
+
+struct acpi_ptc_register {
+	u8 descriptor;
+	u16 length;
+	u8 space_id;
+	u8 bit_width;
+	u8 bit_offset;
+	u8 reserved;
+	u64 address;
+} __attribute__ ((packed));
+
+struct acpi_processor_tx_tss {
+	u64 freqpercentage;	/* */
+	u64 power;	/* milliWatts */
+	u64 transition_latency;	/* microseconds */
+	u64 control;	/* control value */
+	u64 status;	/* success indicator */
+};
+struct acpi_processor_tx {
+	u16 power;
+	u16 performance;
+};
+
+struct acpi_processor;
+struct acpi_processor_throttling {
+	unsigned int state;
+	unsigned int platform_limit;
+	struct acpi_pct_register control_register;
+	struct acpi_pct_register status_register;
+	unsigned int state_count;
+	struct acpi_processor_tx_tss *states_tss;
+	struct acpi_tsd_package domain_info;
+	cpumask_var_t shared_cpu_map;
+	int (*acpi_processor_get_throttling) (struct acpi_processor * pr);
+	int (*acpi_processor_set_throttling) (struct acpi_processor * pr,
+					      int state, bool force);
+
+	u32 address;
+	u8 duty_offset;
+	u8 duty_width;
+	u8 tsd_valid_flag;
+	unsigned int shared_type;
+	struct acpi_processor_tx states[ACPI_PROCESSOR_MAX_THROTTLING];
+};
+
+/* Limit Interface */
+
+struct acpi_processor_lx {
+	int px;			/* performance state */
+	int tx;			/* throttle level */
+};
+
+struct acpi_processor_limit {
+	struct acpi_processor_lx state;	/* current limit */
+	struct acpi_processor_lx thermal;	/* thermal limit */
+	struct acpi_processor_lx user;	/* user limit */
+};
+
+struct acpi_processor_flags {
+	u8 power:1;
+	u8 performance:1;
+	u8 throttling:1;
+	u8 limit:1;
+	u8 bm_control:1;
+	u8 bm_check:1;
+	u8 has_cst:1;
+	u8 power_setup_done:1;
+	u8 bm_rld_set:1;
+	u8 need_hotplug_init:1;
+};
+
+struct acpi_processor {
+	acpi_handle handle;
+	u32 acpi_id;
+	u32 id;
+	u32 pblk;
+	int performance_platform_limit;
+	int throttling_platform_limit;
+	/* 0 - states 0..n-th state available */
+
+	struct acpi_processor_flags flags;
+	struct acpi_processor_power power;
+	struct acpi_processor_performance *performance;
+	struct acpi_processor_throttling throttling;
+	struct acpi_processor_limit limit;
+	struct thermal_cooling_device *cdev;
+};
+
+struct acpi_processor_errata {
+	u8 smp;
+	struct {
+		u8 throttle:1;
+		u8 fdma:1;
+		u8 reserved:6;
+		u32 bmisx;
+	} piix4;
+};
+
+extern void acpi_processor_load_module(struct acpi_processor *pr);
+extern int acpi_processor_preregister_performance(struct
+						  acpi_processor_performance
+						  __percpu *performance);
+
+extern int acpi_processor_register_performance(struct acpi_processor_performance
+					       *performance, unsigned int cpu);
+extern void acpi_processor_unregister_performance(struct
+						  acpi_processor_performance
+						  *performance,
+						  unsigned int cpu);
+
+/* note: this locks both the calling module and the processor module
+         if a _PPC object exists, rmmod is disallowed then */
+int acpi_processor_notify_smm(struct module *calling_module);
+
+/* for communication between multiple parts of the processor kernel module */
+DECLARE_PER_CPU(struct acpi_processor *, processors);
+extern struct acpi_processor_errata errata;
+
+#ifdef ARCH_HAS_POWER_INIT
+void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags,
+					unsigned int cpu);
+int acpi_processor_ffh_cstate_probe(unsigned int cpu,
+				    struct acpi_processor_cx *cx,
+				    struct acpi_power_register *reg);
+void acpi_processor_ffh_cstate_enter(struct acpi_processor_cx *cstate);
+#else
+static inline void acpi_processor_power_init_bm_check(struct
+						      acpi_processor_flags
+						      *flags, unsigned int cpu)
+{
+	flags->bm_check = 1;
+	return;
+}
+static inline int acpi_processor_ffh_cstate_probe(unsigned int cpu,
+						  struct acpi_processor_cx *cx,
+						  struct acpi_power_register
+						  *reg)
+{
+	return -1;
+}
+static inline void acpi_processor_ffh_cstate_enter(struct acpi_processor_cx
+						   *cstate)
+{
+	return;
+}
+#endif
+
+/* in processor_perflib.c */
+
+#ifdef CONFIG_CPU_FREQ
+void acpi_processor_ppc_init(void);
+void acpi_processor_ppc_exit(void);
+int acpi_processor_ppc_has_changed(struct acpi_processor *pr, int event_flag);
+extern int acpi_processor_get_bios_limit(int cpu, unsigned int *limit);
+#else
+static inline void acpi_processor_ppc_init(void)
+{
+	return;
+}
+static inline void acpi_processor_ppc_exit(void)
+{
+	return;
+}
+static inline int acpi_processor_ppc_has_changed(struct acpi_processor *pr,
+								int event_flag)
+{
+	static unsigned int printout = 1;
+	if (printout) {
+		printk(KERN_WARNING
+		       "Warning: Processor Platform Limit event detected, but not handled.\n");
+		printk(KERN_WARNING
+		       "Consider compiling CPUfreq support into your kernel.\n");
+		printout = 0;
+	}
+	return 0;
+}
+static inline int acpi_processor_get_bios_limit(int cpu, unsigned int *limit)
+{
+	return -ENODEV;
+}
+
+#endif				/* CONFIG_CPU_FREQ */
+
+/* in processor_core.c */
+void acpi_processor_set_pdc(acpi_handle handle);
+int acpi_get_cpuid(acpi_handle, int type, u32 acpi_id);
+
+/* in processor_throttling.c */
+int acpi_processor_tstate_has_changed(struct acpi_processor *pr);
+int acpi_processor_get_throttling_info(struct acpi_processor *pr);
+extern int acpi_processor_set_throttling(struct acpi_processor *pr,
+					 int state, bool force);
+/*
+ * Reevaluate whether the T-state is invalid after one cpu is
+ * onlined/offlined. In such case the flags.throttling will be updated.
+ */
+extern void acpi_processor_reevaluate_tstate(struct acpi_processor *pr,
+			unsigned long action);
+extern const struct file_operations acpi_processor_throttling_fops;
+extern void acpi_processor_throttling_init(void);
+/* in processor_idle.c */
+int acpi_processor_power_init(struct acpi_processor *pr,
+			      struct acpi_device *device);
+int acpi_processor_cst_has_changed(struct acpi_processor *pr);
+int acpi_processor_hotplug(struct acpi_processor *pr);
+int acpi_processor_power_exit(struct acpi_processor *pr,
+			      struct acpi_device *device);
+int acpi_processor_suspend(struct acpi_device * device, pm_message_t state);
+int acpi_processor_resume(struct acpi_device * device);
+extern struct cpuidle_driver acpi_idle_driver;
+
+/* in processor_thermal.c */
+int acpi_processor_get_limit_info(struct acpi_processor *pr);
+extern const struct thermal_cooling_device_ops processor_cooling_ops;
+#ifdef CONFIG_CPU_FREQ
+void acpi_thermal_cpufreq_init(void);
+void acpi_thermal_cpufreq_exit(void);
+#else
+static inline void acpi_thermal_cpufreq_init(void)
+{
+	return;
+}
+static inline void acpi_thermal_cpufreq_exit(void)
+{
+	return;
+}
+#endif
+
+#endif
diff --git a/include/acpi/reboot.h b/include/acpi/reboot.h
new file mode 100644
index 00000000..0419184c
--- /dev/null
+++ b/include/acpi/reboot.h
@@ -0,0 +1,11 @@
+#ifndef __ACPI_REBOOT_H
+#define __ACPI_REBOOT_H
+
+#ifdef CONFIG_ACPI
+extern void acpi_reboot(void);
+#else
+static inline void acpi_reboot(void) { }
+#endif
+
+#endif
+
diff --git a/include/acpi/video.h b/include/acpi/video.h
new file mode 100644
index 00000000..61109f26
--- /dev/null
+++ b/include/acpi/video.h
@@ -0,0 +1,34 @@
+#ifndef __ACPI_VIDEO_H
+#define __ACPI_VIDEO_H
+
+#include <linux/errno.h> /* for ENODEV */
+
+struct acpi_device;
+
+#define ACPI_VIDEO_CLASS	"video"
+
+#define ACPI_VIDEO_DISPLAY_CRT  1
+#define ACPI_VIDEO_DISPLAY_TV   2
+#define ACPI_VIDEO_DISPLAY_DVI  3
+#define ACPI_VIDEO_DISPLAY_LCD  4
+
+#define ACPI_VIDEO_DISPLAY_LEGACY_MONITOR 0x0100
+#define ACPI_VIDEO_DISPLAY_LEGACY_PANEL   0x0110
+#define ACPI_VIDEO_DISPLAY_LEGACY_TV      0x0200
+
+#if (defined CONFIG_ACPI_VIDEO || defined CONFIG_ACPI_VIDEO_MODULE)
+extern int acpi_video_register(void);
+extern void acpi_video_unregister(void);
+extern int acpi_video_get_edid(struct acpi_device *device, int type,
+			       int device_id, void **edid);
+#else
+static inline int acpi_video_register(void) { return 0; }
+static inline void acpi_video_unregister(void) { return; }
+static inline int acpi_video_get_edid(struct acpi_device *device, int type,
+				      int device_id, void **edid)
+{
+	return -ENODEV;
+}
+#endif
+
+#endif
diff --git a/include/asm-generic/4level-fixup.h b/include/asm-generic/4level-fixup.h
new file mode 100644
index 00000000..77ff5477
--- /dev/null
+++ b/include/asm-generic/4level-fixup.h
@@ -0,0 +1,37 @@
+#ifndef _4LEVEL_FIXUP_H
+#define _4LEVEL_FIXUP_H
+
+#define __ARCH_HAS_4LEVEL_HACK
+#define __PAGETABLE_PUD_FOLDED
+
+#define PUD_SIZE			PGDIR_SIZE
+#define PUD_MASK			PGDIR_MASK
+#define PTRS_PER_PUD			1
+
+#define pud_t				pgd_t
+
+#define pmd_alloc(mm, pud, address) \
+	((unlikely(pgd_none(*(pud))) && __pmd_alloc(mm, pud, address))? \
+ 		NULL: pmd_offset(pud, address))
+
+#define pud_alloc(mm, pgd, address)	(pgd)
+#define pud_offset(pgd, start)		(pgd)
+#define pud_none(pud)			0
+#define pud_bad(pud)			0
+#define pud_present(pud)		1
+#define pud_ERROR(pud)			do { } while (0)
+#define pud_clear(pud)			pgd_clear(pud)
+#define pud_val(pud)			pgd_val(pud)
+#define pud_populate(mm, pud, pmd)	pgd_populate(mm, pud, pmd)
+#define pud_page(pud)			pgd_page(pud)
+#define pud_page_vaddr(pud)		pgd_page_vaddr(pud)
+
+#undef pud_free_tlb
+#define pud_free_tlb(tlb, x, addr)	do { } while (0)
+#define pud_free(mm, x)			do { } while (0)
+#define __pud_free_tlb(tlb, x, addr)	do { } while (0)
+
+#undef  pud_addr_end
+#define pud_addr_end(addr, end)		(end)
+
+#endif
diff --git a/include/asm-generic/Kbuild b/include/asm-generic/Kbuild
new file mode 100644
index 00000000..53f91b1a
--- /dev/null
+++ b/include/asm-generic/Kbuild
@@ -0,0 +1,34 @@
+header-y += auxvec.h
+header-y += bitsperlong.h
+header-y += errno-base.h
+header-y += errno.h
+header-y += fcntl.h
+header-y += int-l64.h
+header-y += int-ll64.h
+header-y += ioctl.h
+header-y += ioctls.h
+header-y += ipcbuf.h
+header-y += mman-common.h
+header-y += mman.h
+header-y += msgbuf.h
+header-y += param.h
+header-y += poll.h
+header-y += posix_types.h
+header-y += resource.h
+header-y += sembuf.h
+header-y += setup.h
+header-y += shmbuf.h
+header-y += shmparam.h
+header-y += siginfo.h
+header-y += signal-defs.h
+header-y += signal.h
+header-y += socket.h
+header-y += sockios.h
+header-y += stat.h
+header-y += statfs.h
+header-y += swab.h
+header-y += termbits.h
+header-y += termios.h
+header-y += types.h
+header-y += ucontext.h
+header-y += unistd.h
diff --git a/include/asm-generic/Kbuild.asm b/include/asm-generic/Kbuild.asm
new file mode 100644
index 00000000..c5d2e5dd
--- /dev/null
+++ b/include/asm-generic/Kbuild.asm
@@ -0,0 +1,45 @@
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \
+		  $(srctree)/include/asm-$(SRCARCH)/kvm.h),)
+header-y  += kvm.h
+endif
+
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h \
+		  $(srctree)/include/asm-$(SRCARCH)/kvm_para.h),)
+header-y  += kvm_para.h
+endif
+
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \
+		  $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
+header-y += a.out.h
+endif
+
+header-y += auxvec.h
+header-y += bitsperlong.h
+header-y += byteorder.h
+header-y += errno.h
+header-y += fcntl.h
+header-y += ioctl.h
+header-y += ioctls.h
+header-y += ipcbuf.h
+header-y += mman.h
+header-y += msgbuf.h
+header-y += param.h
+header-y += poll.h
+header-y += posix_types.h
+header-y += ptrace.h
+header-y += resource.h
+header-y += sembuf.h
+header-y += setup.h
+header-y += shmbuf.h
+header-y += sigcontext.h
+header-y += siginfo.h
+header-y += signal.h
+header-y += socket.h
+header-y += sockios.h
+header-y += stat.h
+header-y += statfs.h
+header-y += swab.h
+header-y += termbits.h
+header-y += termios.h
+header-y += types.h
+header-y += unistd.h
diff --git a/include/asm-generic/atomic-long.h b/include/asm-generic/atomic-long.h
new file mode 100644
index 00000000..b7babf02
--- /dev/null
+++ b/include/asm-generic/atomic-long.h
@@ -0,0 +1,258 @@
+#ifndef _ASM_GENERIC_ATOMIC_LONG_H
+#define _ASM_GENERIC_ATOMIC_LONG_H
+/*
+ * Copyright (C) 2005 Silicon Graphics, Inc.
+ *	Christoph Lameter
+ *
+ * Allows to provide arch independent atomic definitions without the need to
+ * edit all arch specific atomic.h files.
+ */
+
+#include <asm/types.h>
+
+/*
+ * Suppport for atomic_long_t
+ *
+ * Casts for parameters are avoided for existing atomic functions in order to
+ * avoid issues with cast-as-lval under gcc 4.x and other limitations that the
+ * macros of a platform may have.
+ */
+
+#if BITS_PER_LONG == 64
+
+typedef atomic64_t atomic_long_t;
+
+#define ATOMIC_LONG_INIT(i)	ATOMIC64_INIT(i)
+
+static inline long atomic_long_read(atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return (long)atomic64_read(v);
+}
+
+static inline void atomic_long_set(atomic_long_t *l, long i)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	atomic64_set(v, i);
+}
+
+static inline void atomic_long_inc(atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	atomic64_inc(v);
+}
+
+static inline void atomic_long_dec(atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	atomic64_dec(v);
+}
+
+static inline void atomic_long_add(long i, atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	atomic64_add(i, v);
+}
+
+static inline void atomic_long_sub(long i, atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	atomic64_sub(i, v);
+}
+
+static inline int atomic_long_sub_and_test(long i, atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return atomic64_sub_and_test(i, v);
+}
+
+static inline int atomic_long_dec_and_test(atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return atomic64_dec_and_test(v);
+}
+
+static inline int atomic_long_inc_and_test(atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return atomic64_inc_and_test(v);
+}
+
+static inline int atomic_long_add_negative(long i, atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return atomic64_add_negative(i, v);
+}
+
+static inline long atomic_long_add_return(long i, atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return (long)atomic64_add_return(i, v);
+}
+
+static inline long atomic_long_sub_return(long i, atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return (long)atomic64_sub_return(i, v);
+}
+
+static inline long atomic_long_inc_return(atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return (long)atomic64_inc_return(v);
+}
+
+static inline long atomic_long_dec_return(atomic_long_t *l)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return (long)atomic64_dec_return(v);
+}
+
+static inline long atomic_long_add_unless(atomic_long_t *l, long a, long u)
+{
+	atomic64_t *v = (atomic64_t *)l;
+
+	return (long)atomic64_add_unless(v, a, u);
+}
+
+#define atomic_long_inc_not_zero(l) atomic64_inc_not_zero((atomic64_t *)(l))
+
+#define atomic_long_cmpxchg(l, old, new) \
+	(atomic64_cmpxchg((atomic64_t *)(l), (old), (new)))
+#define atomic_long_xchg(v, new) \
+	(atomic64_xchg((atomic64_t *)(v), (new)))
+
+#else  /*  BITS_PER_LONG == 64  */
+
+typedef atomic_t atomic_long_t;
+
+#define ATOMIC_LONG_INIT(i)	ATOMIC_INIT(i)
+static inline long atomic_long_read(atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return (long)atomic_read(v);
+}
+
+static inline void atomic_long_set(atomic_long_t *l, long i)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	atomic_set(v, i);
+}
+
+static inline void atomic_long_inc(atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	atomic_inc(v);
+}
+
+static inline void atomic_long_dec(atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	atomic_dec(v);
+}
+
+static inline void atomic_long_add(long i, atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	atomic_add(i, v);
+}
+
+static inline void atomic_long_sub(long i, atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	atomic_sub(i, v);
+}
+
+static inline int atomic_long_sub_and_test(long i, atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return atomic_sub_and_test(i, v);
+}
+
+static inline int atomic_long_dec_and_test(atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return atomic_dec_and_test(v);
+}
+
+static inline int atomic_long_inc_and_test(atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return atomic_inc_and_test(v);
+}
+
+static inline int atomic_long_add_negative(long i, atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return atomic_add_negative(i, v);
+}
+
+static inline long atomic_long_add_return(long i, atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return (long)atomic_add_return(i, v);
+}
+
+static inline long atomic_long_sub_return(long i, atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return (long)atomic_sub_return(i, v);
+}
+
+static inline long atomic_long_inc_return(atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return (long)atomic_inc_return(v);
+}
+
+static inline long atomic_long_dec_return(atomic_long_t *l)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return (long)atomic_dec_return(v);
+}
+
+static inline long atomic_long_add_unless(atomic_long_t *l, long a, long u)
+{
+	atomic_t *v = (atomic_t *)l;
+
+	return (long)atomic_add_unless(v, a, u);
+}
+
+#define atomic_long_inc_not_zero(l) atomic_inc_not_zero((atomic_t *)(l))
+
+#define atomic_long_cmpxchg(l, old, new) \
+	(atomic_cmpxchg((atomic_t *)(l), (old), (new)))
+#define atomic_long_xchg(v, new) \
+	(atomic_xchg((atomic_t *)(v), (new)))
+
+#endif  /*  BITS_PER_LONG == 64  */
+
+#endif  /*  _ASM_GENERIC_ATOMIC_LONG_H  */
diff --git a/include/asm-generic/atomic.h b/include/asm-generic/atomic.h
new file mode 100644
index 00000000..1ced6413
--- /dev/null
+++ b/include/asm-generic/atomic.h
@@ -0,0 +1,198 @@
+/*
+ * Generic C implementation of atomic counter operations. Usable on
+ * UP systems only. Do not include in machine independent code.
+ *
+ * Originally implemented for MN10300.
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef __ASM_GENERIC_ATOMIC_H
+#define __ASM_GENERIC_ATOMIC_H
+
+#include <asm/cmpxchg.h>
+
+#ifdef CONFIG_SMP
+/* Force people to define core atomics */
+# if !defined(atomic_add_return) || !defined(atomic_sub_return) || \
+     !defined(atomic_clear_mask) || !defined(atomic_set_mask)
+#  error "SMP requires a little arch-specific magic"
+# endif
+#endif
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ */
+
+#define ATOMIC_INIT(i)	{ (i) }
+
+#ifdef __KERNEL__
+
+/**
+ * atomic_read - read atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically reads the value of @v.
+ */
+#ifndef atomic_read
+#define atomic_read(v)	(*(volatile int *)&(v)->counter)
+#endif
+
+/**
+ * atomic_set - set atomic variable
+ * @v: pointer of type atomic_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i.
+ */
+#define atomic_set(v, i) (((v)->counter) = (i))
+
+#include <linux/irqflags.h>
+
+/**
+ * atomic_add_return - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v and returns the result
+ */
+#ifndef atomic_add_return
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	unsigned long flags;
+	int temp;
+
+	raw_local_irq_save(flags); /* Don't trace it in an irqsoff handler */
+	temp = v->counter;
+	temp += i;
+	v->counter = temp;
+	raw_local_irq_restore(flags);
+
+	return temp;
+}
+#endif
+
+/**
+ * atomic_sub_return - subtract integer from atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v and returns the result
+ */
+#ifndef atomic_sub_return
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+	unsigned long flags;
+	int temp;
+
+	raw_local_irq_save(flags); /* Don't trace it in an irqsoff handler */
+	temp = v->counter;
+	temp -= i;
+	v->counter = temp;
+	raw_local_irq_restore(flags);
+
+	return temp;
+}
+#endif
+
+static inline int atomic_add_negative(int i, atomic_t *v)
+{
+	return atomic_add_return(i, v) < 0;
+}
+
+static inline void atomic_add(int i, atomic_t *v)
+{
+	atomic_add_return(i, v);
+}
+
+static inline void atomic_sub(int i, atomic_t *v)
+{
+	atomic_sub_return(i, v);
+}
+
+static inline void atomic_inc(atomic_t *v)
+{
+	atomic_add_return(1, v);
+}
+
+static inline void atomic_dec(atomic_t *v)
+{
+	atomic_sub_return(1, v);
+}
+
+#define atomic_dec_return(v)		atomic_sub_return(1, (v))
+#define atomic_inc_return(v)		atomic_add_return(1, (v))
+
+#define atomic_sub_and_test(i, v)	(atomic_sub_return((i), (v)) == 0)
+#define atomic_dec_and_test(v)		(atomic_dec_return(v) == 0)
+#define atomic_inc_and_test(v)		(atomic_inc_return(v) == 0)
+
+#define atomic_xchg(ptr, v)		(xchg(&(ptr)->counter, (v)))
+#define atomic_cmpxchg(v, old, new)	(cmpxchg(&((v)->counter), (old), (new)))
+
+#define cmpxchg_local(ptr, o, n)				  	       \
+	((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
+			(unsigned long)(n), sizeof(*(ptr))))
+
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+static inline int __atomic_add_unless(atomic_t *v, int a, int u)
+{
+  int c, old;
+  c = atomic_read(v);
+  while (c != u && (old = atomic_cmpxchg(v, c, c + a)) != c)
+    c = old;
+  return c;
+}
+
+/**
+ * atomic_clear_mask - Atomically clear bits in atomic variable
+ * @mask: Mask of the bits to be cleared
+ * @v: pointer of type atomic_t
+ *
+ * Atomically clears the bits set in @mask from @v
+ */
+#ifndef atomic_clear_mask
+static inline void atomic_clear_mask(unsigned long mask, atomic_t *v)
+{
+	unsigned long flags;
+
+	mask = ~mask;
+	raw_local_irq_save(flags); /* Don't trace it in a irqsoff handler */
+	v->counter &= mask;
+	raw_local_irq_restore(flags);
+}
+#endif
+
+/**
+ * atomic_set_mask - Atomically set bits in atomic variable
+ * @mask: Mask of the bits to be set
+ * @v: pointer of type atomic_t
+ *
+ * Atomically sets the bits set in @mask in @v
+ */
+#ifndef atomic_set_mask
+static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
+{
+	unsigned long flags;
+
+	raw_local_irq_save(flags); /* Don't trace it in a irqsoff handler */
+	v->counter |= mask;
+	raw_local_irq_restore(flags);
+}
+#endif
+
+/* Assume that atomic operations are already serializing */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_GENERIC_ATOMIC_H */
diff --git a/include/asm-generic/atomic64.h b/include/asm-generic/atomic64.h
new file mode 100644
index 00000000..b18ce4f9
--- /dev/null
+++ b/include/asm-generic/atomic64.h
@@ -0,0 +1,42 @@
+/*
+ * Generic implementation of 64-bit atomics using spinlocks,
+ * useful on processors that don't have 64-bit atomic instructions.
+ *
+ * Copyright © 2009 Paul Mackerras, IBM Corp. <paulus@au1.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_GENERIC_ATOMIC64_H
+#define _ASM_GENERIC_ATOMIC64_H
+
+typedef struct {
+	long long counter;
+} atomic64_t;
+
+#define ATOMIC64_INIT(i)	{ (i) }
+
+extern long long atomic64_read(const atomic64_t *v);
+extern void	 atomic64_set(atomic64_t *v, long long i);
+extern void	 atomic64_add(long long a, atomic64_t *v);
+extern long long atomic64_add_return(long long a, atomic64_t *v);
+extern void	 atomic64_sub(long long a, atomic64_t *v);
+extern long long atomic64_sub_return(long long a, atomic64_t *v);
+extern long long atomic64_dec_if_positive(atomic64_t *v);
+extern long long atomic64_cmpxchg(atomic64_t *v, long long o, long long n);
+extern long long atomic64_xchg(atomic64_t *v, long long new);
+extern int	 atomic64_add_unless(atomic64_t *v, long long a, long long u);
+
+#define atomic64_add_negative(a, v)	(atomic64_add_return((a), (v)) < 0)
+#define atomic64_inc(v)			atomic64_add(1LL, (v))
+#define atomic64_inc_return(v)		atomic64_add_return(1LL, (v))
+#define atomic64_inc_and_test(v) 	(atomic64_inc_return(v) == 0)
+#define atomic64_sub_and_test(a, v)	(atomic64_sub_return((a), (v)) == 0)
+#define atomic64_dec(v)			atomic64_sub(1LL, (v))
+#define atomic64_dec_return(v)		atomic64_sub_return(1LL, (v))
+#define atomic64_dec_and_test(v)	(atomic64_dec_return((v)) == 0)
+#define atomic64_inc_not_zero(v) 	atomic64_add_unless((v), 1LL, 0LL)
+
+#endif  /*  _ASM_GENERIC_ATOMIC64_H  */
diff --git a/include/asm-generic/audit_change_attr.h b/include/asm-generic/audit_change_attr.h
new file mode 100644
index 00000000..89b73e5d
--- /dev/null
+++ b/include/asm-generic/audit_change_attr.h
@@ -0,0 +1,30 @@
+#ifdef __NR_chmod
+__NR_chmod,
+#endif
+__NR_fchmod,
+#ifdef __NR_chown
+__NR_chown,
+__NR_fchown,
+__NR_lchown,
+#endif
+__NR_setxattr,
+__NR_lsetxattr,
+__NR_fsetxattr,
+__NR_removexattr,
+__NR_lremovexattr,
+__NR_fremovexattr,
+#ifdef __NR_fchownat
+__NR_fchownat,
+__NR_fchmodat,
+#endif
+#ifdef __NR_chown32
+__NR_chown32,
+__NR_fchown32,
+__NR_lchown32,
+#endif
+#ifdef __NR_link
+__NR_link,
+#endif
+#ifdef __NR_linkat
+__NR_linkat,
+#endif
diff --git a/include/asm-generic/audit_dir_write.h b/include/asm-generic/audit_dir_write.h
new file mode 100644
index 00000000..7b61db4f
--- /dev/null
+++ b/include/asm-generic/audit_dir_write.h
@@ -0,0 +1,32 @@
+#ifdef __NR_rename
+__NR_rename,
+#endif
+#ifdef __NR_mkdir
+__NR_mkdir,
+#endif
+#ifdef __NR_rmdir
+__NR_rmdir,
+#endif
+#ifdef __NR_creat
+__NR_creat,
+#endif
+#ifdef __NR_link
+__NR_link,
+#endif
+#ifdef __NR_unlink
+__NR_unlink,
+#endif
+#ifdef __NR_symlink
+__NR_symlink,
+#endif
+#ifdef __NR_mknod
+__NR_mknod,
+#endif
+#ifdef __NR_mkdirat
+__NR_mkdirat,
+__NR_mknodat,
+__NR_unlinkat,
+__NR_renameat,
+__NR_linkat,
+__NR_symlinkat,
+#endif
diff --git a/include/asm-generic/audit_read.h b/include/asm-generic/audit_read.h
new file mode 100644
index 00000000..3b249cb8
--- /dev/null
+++ b/include/asm-generic/audit_read.h
@@ -0,0 +1,13 @@
+#ifdef __NR_readlink
+__NR_readlink,
+#endif
+__NR_quotactl,
+__NR_listxattr,
+__NR_llistxattr,
+__NR_flistxattr,
+__NR_getxattr,
+__NR_lgetxattr,
+__NR_fgetxattr,
+#ifdef __NR_readlinkat
+__NR_readlinkat,
+#endif
diff --git a/include/asm-generic/audit_signal.h b/include/asm-generic/audit_signal.h
new file mode 100644
index 00000000..6feab7f1
--- /dev/null
+++ b/include/asm-generic/audit_signal.h
@@ -0,0 +1,3 @@
+__NR_kill,
+__NR_tgkill,
+__NR_tkill,
diff --git a/include/asm-generic/audit_write.h b/include/asm-generic/audit_write.h
new file mode 100644
index 00000000..e7020c57
--- /dev/null
+++ b/include/asm-generic/audit_write.h
@@ -0,0 +1,15 @@
+#include <asm-generic/audit_dir_write.h>
+__NR_acct,
+#ifdef __NR_swapon
+__NR_swapon,
+#endif
+__NR_quotactl,
+#ifdef __NR_truncate
+__NR_truncate,
+#endif
+#ifdef __NR_truncate64
+__NR_truncate64,
+#endif
+#ifdef __NR_bind
+__NR_bind,		/* bind can affect fs object only in one way... */
+#endif
diff --git a/include/asm-generic/auxvec.h b/include/asm-generic/auxvec.h
new file mode 100644
index 00000000..b99573b0
--- /dev/null
+++ b/include/asm-generic/auxvec.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_GENERIC_AUXVEC_H
+#define __ASM_GENERIC_AUXVEC_H
+/*
+ * Not all architectures need their own auxvec.h, the most
+ * common definitions are already in linux/auxvec.h.
+ */
+
+#endif /* __ASM_GENERIC_AUXVEC_H */
diff --git a/include/asm-generic/barrier.h b/include/asm-generic/barrier.h
new file mode 100644
index 00000000..639d7a4d
--- /dev/null
+++ b/include/asm-generic/barrier.h
@@ -0,0 +1,50 @@
+/* Generic barrier definitions, based on MN10300 definitions.
+ *
+ * It should be possible to use these on really simple architectures,
+ * but it serves more as a starting point for new ports.
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef __ASM_GENERIC_BARRIER_H
+#define __ASM_GENERIC_BARRIER_H
+
+#ifndef __ASSEMBLY__
+
+#define nop() asm volatile ("nop")
+
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ *
+ * This implementation only contains a compiler barrier.
+ */
+
+#define mb()	asm volatile ("": : :"memory")
+#define rmb()	mb()
+#define wmb()	asm volatile ("": : :"memory")
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#endif
+
+#define set_mb(var, value)  do { var = value;  mb(); } while (0)
+#define set_wmb(var, value) do { var = value; wmb(); } while (0)
+
+#define read_barrier_depends()		do {} while (0)
+#define smp_read_barrier_depends()	do {} while (0)
+
+#endif /* !__ASSEMBLY__ */
+#endif /* __ASM_GENERIC_BARRIER_H */
diff --git a/include/asm-generic/bitops.h b/include/asm-generic/bitops.h
new file mode 100644
index 00000000..280ca7a9
--- /dev/null
+++ b/include/asm-generic/bitops.h
@@ -0,0 +1,44 @@
+#ifndef __ASM_GENERIC_BITOPS_H
+#define __ASM_GENERIC_BITOPS_H
+
+/*
+ * For the benefit of those who are trying to port Linux to another
+ * architecture, here are some C-language equivalents.  You should
+ * recode these in the native assembly language, if at all possible.
+ *
+ * C language equivalents written by Theodore Ts'o, 9/26/92
+ */
+
+#include <linux/irqflags.h>
+#include <linux/compiler.h>
+
+/*
+ * clear_bit may not imply a memory barrier
+ */
+#ifndef smp_mb__before_clear_bit
+#define smp_mb__before_clear_bit()	smp_mb()
+#define smp_mb__after_clear_bit()	smp_mb()
+#endif
+
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/find.h>
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+
+#include <asm-generic/bitops/atomic.h>
+#include <asm-generic/bitops/non-atomic.h>
+#include <asm-generic/bitops/le.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+
+#endif /* __ASM_GENERIC_BITOPS_H */
diff --git a/include/asm-generic/bitops/__ffs.h b/include/asm-generic/bitops/__ffs.h
new file mode 100644
index 00000000..937d7c43
--- /dev/null
+++ b/include/asm-generic/bitops/__ffs.h
@@ -0,0 +1,43 @@
+#ifndef _ASM_GENERIC_BITOPS___FFS_H_
+#define _ASM_GENERIC_BITOPS___FFS_H_
+
+#include <asm/types.h>
+
+/**
+ * __ffs - find first bit in word.
+ * @word: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static __always_inline unsigned long __ffs(unsigned long word)
+{
+	int num = 0;
+
+#if BITS_PER_LONG == 64
+	if ((word & 0xffffffff) == 0) {
+		num += 32;
+		word >>= 32;
+	}
+#endif
+	if ((word & 0xffff) == 0) {
+		num += 16;
+		word >>= 16;
+	}
+	if ((word & 0xff) == 0) {
+		num += 8;
+		word >>= 8;
+	}
+	if ((word & 0xf) == 0) {
+		num += 4;
+		word >>= 4;
+	}
+	if ((word & 0x3) == 0) {
+		num += 2;
+		word >>= 2;
+	}
+	if ((word & 0x1) == 0)
+		num += 1;
+	return num;
+}
+
+#endif /* _ASM_GENERIC_BITOPS___FFS_H_ */
diff --git a/include/asm-generic/bitops/__fls.h b/include/asm-generic/bitops/__fls.h
new file mode 100644
index 00000000..a60a7ccb
--- /dev/null
+++ b/include/asm-generic/bitops/__fls.h
@@ -0,0 +1,43 @@
+#ifndef _ASM_GENERIC_BITOPS___FLS_H_
+#define _ASM_GENERIC_BITOPS___FLS_H_
+
+#include <asm/types.h>
+
+/**
+ * __fls - find last (most-significant) set bit in a long word
+ * @word: the word to search
+ *
+ * Undefined if no set bit exists, so code should check against 0 first.
+ */
+static __always_inline unsigned long __fls(unsigned long word)
+{
+	int num = BITS_PER_LONG - 1;
+
+#if BITS_PER_LONG == 64
+	if (!(word & (~0ul << 32))) {
+		num -= 32;
+		word <<= 32;
+	}
+#endif
+	if (!(word & (~0ul << (BITS_PER_LONG-16)))) {
+		num -= 16;
+		word <<= 16;
+	}
+	if (!(word & (~0ul << (BITS_PER_LONG-8)))) {
+		num -= 8;
+		word <<= 8;
+	}
+	if (!(word & (~0ul << (BITS_PER_LONG-4)))) {
+		num -= 4;
+		word <<= 4;
+	}
+	if (!(word & (~0ul << (BITS_PER_LONG-2)))) {
+		num -= 2;
+		word <<= 2;
+	}
+	if (!(word & (~0ul << (BITS_PER_LONG-1))))
+		num -= 1;
+	return num;
+}
+
+#endif /* _ASM_GENERIC_BITOPS___FLS_H_ */
diff --git a/include/asm-generic/bitops/arch_hweight.h b/include/asm-generic/bitops/arch_hweight.h
new file mode 100644
index 00000000..6a211f40
--- /dev/null
+++ b/include/asm-generic/bitops/arch_hweight.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_GENERIC_BITOPS_ARCH_HWEIGHT_H_
+#define _ASM_GENERIC_BITOPS_ARCH_HWEIGHT_H_
+
+#include <asm/types.h>
+
+static inline unsigned int __arch_hweight32(unsigned int w)
+{
+	return __sw_hweight32(w);
+}
+
+static inline unsigned int __arch_hweight16(unsigned int w)
+{
+	return __sw_hweight16(w);
+}
+
+static inline unsigned int __arch_hweight8(unsigned int w)
+{
+	return __sw_hweight8(w);
+}
+
+static inline unsigned long __arch_hweight64(__u64 w)
+{
+	return __sw_hweight64(w);
+}
+#endif /* _ASM_GENERIC_BITOPS_HWEIGHT_H_ */
diff --git a/include/asm-generic/bitops/atomic.h b/include/asm-generic/bitops/atomic.h
new file mode 100644
index 00000000..9ae6c34d
--- /dev/null
+++ b/include/asm-generic/bitops/atomic.h
@@ -0,0 +1,189 @@
+#ifndef _ASM_GENERIC_BITOPS_ATOMIC_H_
+#define _ASM_GENERIC_BITOPS_ATOMIC_H_
+
+#include <asm/types.h>
+#include <linux/irqflags.h>
+
+#ifdef CONFIG_SMP
+#include <asm/spinlock.h>
+#include <asm/cache.h>		/* we use L1_CACHE_BYTES */
+
+/* Use an array of spinlocks for our atomic_ts.
+ * Hash function to index into a different SPINLOCK.
+ * Since "a" is usually an address, use one spinlock per cacheline.
+ */
+#  define ATOMIC_HASH_SIZE 4
+#  define ATOMIC_HASH(a) (&(__atomic_hash[ (((unsigned long) a)/L1_CACHE_BYTES) & (ATOMIC_HASH_SIZE-1) ]))
+
+extern arch_spinlock_t __atomic_hash[ATOMIC_HASH_SIZE] __lock_aligned;
+
+/* Can't use raw_spin_lock_irq because of #include problems, so
+ * this is the substitute */
+#define _atomic_spin_lock_irqsave(l,f) do {	\
+	arch_spinlock_t *s = ATOMIC_HASH(l);	\
+	local_irq_save(f);			\
+	arch_spin_lock(s);			\
+} while(0)
+
+#define _atomic_spin_unlock_irqrestore(l,f) do {	\
+	arch_spinlock_t *s = ATOMIC_HASH(l);		\
+	arch_spin_unlock(s);				\
+	local_irq_restore(f);				\
+} while(0)
+
+
+#else
+#  define _atomic_spin_lock_irqsave(l,f) do { local_irq_save(f); } while (0)
+#  define _atomic_spin_unlock_irqrestore(l,f) do { local_irq_restore(f); } while (0)
+#endif
+
+/*
+ * NMI events can occur at any time, including when interrupts have been
+ * disabled by *_irqsave().  So you can get NMI events occurring while a
+ * *_bit function is holding a spin lock.  If the NMI handler also wants
+ * to do bit manipulation (and they do) then you can get a deadlock
+ * between the original caller of *_bit() and the NMI handler.
+ *
+ * by Keith Owens
+ */
+
+/**
+ * set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered.  See __set_bit()
+ * if you do not require the atomic guarantees.
+ *
+ * Note: there are no guarantees that this function will not be reordered
+ * on non x86 architectures, so if you are writing portable code,
+ * make sure not to rely on its reordering guarantees.
+ *
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void set_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long flags;
+
+	_atomic_spin_lock_irqsave(p, flags);
+	*p  |= mask;
+	_atomic_spin_unlock_irqrestore(p, flags);
+}
+
+/**
+ * clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and may not be reordered.  However, it does
+ * not contain a memory barrier, so if it is used for locking purposes,
+ * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
+ * in order to ensure changes are visible on other processors.
+ */
+static inline void clear_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long flags;
+
+	_atomic_spin_lock_irqsave(p, flags);
+	*p &= ~mask;
+	_atomic_spin_unlock_irqrestore(p, flags);
+}
+
+/**
+ * change_bit - Toggle a bit in memory
+ * @nr: Bit to change
+ * @addr: Address to start counting from
+ *
+ * change_bit() is atomic and may not be reordered. It may be
+ * reordered on other architectures than x86.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void change_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long flags;
+
+	_atomic_spin_lock_irqsave(p, flags);
+	*p ^= mask;
+	_atomic_spin_unlock_irqrestore(p, flags);
+}
+
+/**
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It may be reordered on other architectures than x86.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old;
+	unsigned long flags;
+
+	_atomic_spin_lock_irqsave(p, flags);
+	old = *p;
+	*p = old | mask;
+	_atomic_spin_unlock_irqrestore(p, flags);
+
+	return (old & mask) != 0;
+}
+
+/**
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It can be reorderdered on other architectures other than x86.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old;
+	unsigned long flags;
+
+	_atomic_spin_lock_irqsave(p, flags);
+	old = *p;
+	*p = old & ~mask;
+	_atomic_spin_unlock_irqrestore(p, flags);
+
+	return (old & mask) != 0;
+}
+
+/**
+ * test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old;
+	unsigned long flags;
+
+	_atomic_spin_lock_irqsave(p, flags);
+	old = *p;
+	*p = old ^ mask;
+	_atomic_spin_unlock_irqrestore(p, flags);
+
+	return (old & mask) != 0;
+}
+
+#endif /* _ASM_GENERIC_BITOPS_ATOMIC_H */
diff --git a/include/asm-generic/bitops/const_hweight.h b/include/asm-generic/bitops/const_hweight.h
new file mode 100644
index 00000000..fa2a50b7
--- /dev/null
+++ b/include/asm-generic/bitops/const_hweight.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_GENERIC_BITOPS_CONST_HWEIGHT_H_
+#define _ASM_GENERIC_BITOPS_CONST_HWEIGHT_H_
+
+/*
+ * Compile time versions of __arch_hweightN()
+ */
+#define __const_hweight8(w)		\
+      (	(!!((w) & (1ULL << 0))) +	\
+	(!!((w) & (1ULL << 1))) +	\
+	(!!((w) & (1ULL << 2))) +	\
+	(!!((w) & (1ULL << 3))) +	\
+	(!!((w) & (1ULL << 4))) +	\
+	(!!((w) & (1ULL << 5))) +	\
+	(!!((w) & (1ULL << 6))) +	\
+	(!!((w) & (1ULL << 7)))	)
+
+#define __const_hweight16(w) (__const_hweight8(w)  + __const_hweight8((w)  >> 8 ))
+#define __const_hweight32(w) (__const_hweight16(w) + __const_hweight16((w) >> 16))
+#define __const_hweight64(w) (__const_hweight32(w) + __const_hweight32((w) >> 32))
+
+/*
+ * Generic interface.
+ */
+#define hweight8(w)  (__builtin_constant_p(w) ? __const_hweight8(w)  : __arch_hweight8(w))
+#define hweight16(w) (__builtin_constant_p(w) ? __const_hweight16(w) : __arch_hweight16(w))
+#define hweight32(w) (__builtin_constant_p(w) ? __const_hweight32(w) : __arch_hweight32(w))
+#define hweight64(w) (__builtin_constant_p(w) ? __const_hweight64(w) : __arch_hweight64(w))
+
+/*
+ * Interface for known constant arguments
+ */
+#define HWEIGHT8(w)  (BUILD_BUG_ON_ZERO(!__builtin_constant_p(w)) + __const_hweight8(w))
+#define HWEIGHT16(w) (BUILD_BUG_ON_ZERO(!__builtin_constant_p(w)) + __const_hweight16(w))
+#define HWEIGHT32(w) (BUILD_BUG_ON_ZERO(!__builtin_constant_p(w)) + __const_hweight32(w))
+#define HWEIGHT64(w) (BUILD_BUG_ON_ZERO(!__builtin_constant_p(w)) + __const_hweight64(w))
+
+/*
+ * Type invariant interface to the compile time constant hweight functions.
+ */
+#define HWEIGHT(w)   HWEIGHT64((u64)w)
+
+#endif /* _ASM_GENERIC_BITOPS_CONST_HWEIGHT_H_ */
diff --git a/include/asm-generic/bitops/ext2-atomic-setbit.h b/include/asm-generic/bitops/ext2-atomic-setbit.h
new file mode 100644
index 00000000..5a099785
--- /dev/null
+++ b/include/asm-generic/bitops/ext2-atomic-setbit.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_GENERIC_BITOPS_EXT2_ATOMIC_SETBIT_H_
+#define _ASM_GENERIC_BITOPS_EXT2_ATOMIC_SETBIT_H_
+
+/*
+ * Atomic bitops based version of ext2 atomic bitops
+ */
+
+#define ext2_set_bit_atomic(l, nr, addr)	test_and_set_bit_le(nr, addr)
+#define ext2_clear_bit_atomic(l, nr, addr)	test_and_clear_bit_le(nr, addr)
+
+#endif /* _ASM_GENERIC_BITOPS_EXT2_ATOMIC_SETBIT_H_ */
diff --git a/include/asm-generic/bitops/ext2-atomic.h b/include/asm-generic/bitops/ext2-atomic.h
new file mode 100644
index 00000000..87f0f109
--- /dev/null
+++ b/include/asm-generic/bitops/ext2-atomic.h
@@ -0,0 +1,26 @@
+#ifndef _ASM_GENERIC_BITOPS_EXT2_ATOMIC_H_
+#define _ASM_GENERIC_BITOPS_EXT2_ATOMIC_H_
+
+/*
+ * Spinlock based version of ext2 atomic bitops
+ */
+
+#define ext2_set_bit_atomic(lock, nr, addr)		\
+	({						\
+		int ret;				\
+		spin_lock(lock);			\
+		ret = __test_and_set_bit_le(nr, addr);	\
+		spin_unlock(lock);			\
+		ret;					\
+	})
+
+#define ext2_clear_bit_atomic(lock, nr, addr)		\
+	({						\
+		int ret;				\
+		spin_lock(lock);			\
+		ret = __test_and_clear_bit_le(nr, addr);	\
+		spin_unlock(lock);			\
+		ret;					\
+	})
+
+#endif /* _ASM_GENERIC_BITOPS_EXT2_ATOMIC_H_ */
diff --git a/include/asm-generic/bitops/ffs.h b/include/asm-generic/bitops/ffs.h
new file mode 100644
index 00000000..fbbb43af
--- /dev/null
+++ b/include/asm-generic/bitops/ffs.h
@@ -0,0 +1,41 @@
+#ifndef _ASM_GENERIC_BITOPS_FFS_H_
+#define _ASM_GENERIC_BITOPS_FFS_H_
+
+/**
+ * ffs - find first bit set
+ * @x: the word to search
+ *
+ * This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+static inline int ffs(int x)
+{
+	int r = 1;
+
+	if (!x)
+		return 0;
+	if (!(x & 0xffff)) {
+		x >>= 16;
+		r += 16;
+	}
+	if (!(x & 0xff)) {
+		x >>= 8;
+		r += 8;
+	}
+	if (!(x & 0xf)) {
+		x >>= 4;
+		r += 4;
+	}
+	if (!(x & 3)) {
+		x >>= 2;
+		r += 2;
+	}
+	if (!(x & 1)) {
+		x >>= 1;
+		r += 1;
+	}
+	return r;
+}
+
+#endif /* _ASM_GENERIC_BITOPS_FFS_H_ */
diff --git a/include/asm-generic/bitops/ffz.h b/include/asm-generic/bitops/ffz.h
new file mode 100644
index 00000000..6744bd4c
--- /dev/null
+++ b/include/asm-generic/bitops/ffz.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_GENERIC_BITOPS_FFZ_H_
+#define _ASM_GENERIC_BITOPS_FFZ_H_
+
+/*
+ * ffz - find first zero in word.
+ * @word: The word to search
+ *
+ * Undefined if no zero exists, so code should check against ~0UL first.
+ */
+#define ffz(x)  __ffs(~(x))
+
+#endif /* _ASM_GENERIC_BITOPS_FFZ_H_ */
diff --git a/include/asm-generic/bitops/find.h b/include/asm-generic/bitops/find.h
new file mode 100644
index 00000000..71c77803
--- /dev/null
+++ b/include/asm-generic/bitops/find.h
@@ -0,0 +1,54 @@
+#ifndef _ASM_GENERIC_BITOPS_FIND_H_
+#define _ASM_GENERIC_BITOPS_FIND_H_
+
+#ifndef find_next_bit
+/**
+ * find_next_bit - find the next set bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The bitmap size in bits
+ */
+extern unsigned long find_next_bit(const unsigned long *addr, unsigned long
+		size, unsigned long offset);
+#endif
+
+#ifndef find_next_zero_bit
+/**
+ * find_next_zero_bit - find the next cleared bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The bitmap size in bits
+ */
+extern unsigned long find_next_zero_bit(const unsigned long *addr, unsigned
+		long size, unsigned long offset);
+#endif
+
+#ifdef CONFIG_GENERIC_FIND_FIRST_BIT
+
+/**
+ * find_first_bit - find the first set bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit number of the first set bit.
+ */
+extern unsigned long find_first_bit(const unsigned long *addr,
+				    unsigned long size);
+
+/**
+ * find_first_zero_bit - find the first cleared bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit number of the first cleared bit.
+ */
+extern unsigned long find_first_zero_bit(const unsigned long *addr,
+					 unsigned long size);
+#else /* CONFIG_GENERIC_FIND_FIRST_BIT */
+
+#define find_first_bit(addr, size) find_next_bit((addr), (size), 0)
+#define find_first_zero_bit(addr, size) find_next_zero_bit((addr), (size), 0)
+
+#endif /* CONFIG_GENERIC_FIND_FIRST_BIT */
+
+#endif /*_ASM_GENERIC_BITOPS_FIND_H_ */
diff --git a/include/asm-generic/bitops/fls.h b/include/asm-generic/bitops/fls.h
new file mode 100644
index 00000000..0576d1f4
--- /dev/null
+++ b/include/asm-generic/bitops/fls.h
@@ -0,0 +1,41 @@
+#ifndef _ASM_GENERIC_BITOPS_FLS_H_
+#define _ASM_GENERIC_BITOPS_FLS_H_
+
+/**
+ * fls - find last (most-significant) bit set
+ * @x: the word to search
+ *
+ * This is defined the same way as ffs.
+ * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
+ */
+
+static __always_inline int fls(int x)
+{
+	int r = 32;
+
+	if (!x)
+		return 0;
+	if (!(x & 0xffff0000u)) {
+		x <<= 16;
+		r -= 16;
+	}
+	if (!(x & 0xff000000u)) {
+		x <<= 8;
+		r -= 8;
+	}
+	if (!(x & 0xf0000000u)) {
+		x <<= 4;
+		r -= 4;
+	}
+	if (!(x & 0xc0000000u)) {
+		x <<= 2;
+		r -= 2;
+	}
+	if (!(x & 0x80000000u)) {
+		x <<= 1;
+		r -= 1;
+	}
+	return r;
+}
+
+#endif /* _ASM_GENERIC_BITOPS_FLS_H_ */
diff --git a/include/asm-generic/bitops/fls64.h b/include/asm-generic/bitops/fls64.h
new file mode 100644
index 00000000..b097cf84
--- /dev/null
+++ b/include/asm-generic/bitops/fls64.h
@@ -0,0 +1,36 @@
+#ifndef _ASM_GENERIC_BITOPS_FLS64_H_
+#define _ASM_GENERIC_BITOPS_FLS64_H_
+
+#include <asm/types.h>
+
+/**
+ * fls64 - find last set bit in a 64-bit word
+ * @x: the word to search
+ *
+ * This is defined in a similar way as the libc and compiler builtin
+ * ffsll, but returns the position of the most significant set bit.
+ *
+ * fls64(value) returns 0 if value is 0 or the position of the last
+ * set bit if value is nonzero. The last (most significant) bit is
+ * at position 64.
+ */
+#if BITS_PER_LONG == 32
+static __always_inline int fls64(__u64 x)
+{
+	__u32 h = x >> 32;
+	if (h)
+		return fls(h) + 32;
+	return fls(x);
+}
+#elif BITS_PER_LONG == 64
+static __always_inline int fls64(__u64 x)
+{
+	if (x == 0)
+		return 0;
+	return __fls(x) + 1;
+}
+#else
+#error BITS_PER_LONG not 32 or 64
+#endif
+
+#endif /* _ASM_GENERIC_BITOPS_FLS64_H_ */
diff --git a/include/asm-generic/bitops/hweight.h b/include/asm-generic/bitops/hweight.h
new file mode 100644
index 00000000..a94d6519
--- /dev/null
+++ b/include/asm-generic/bitops/hweight.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_GENERIC_BITOPS_HWEIGHT_H_
+#define _ASM_GENERIC_BITOPS_HWEIGHT_H_
+
+#include <asm-generic/bitops/arch_hweight.h>
+#include <asm-generic/bitops/const_hweight.h>
+
+#endif /* _ASM_GENERIC_BITOPS_HWEIGHT_H_ */
diff --git a/include/asm-generic/bitops/le.h b/include/asm-generic/bitops/le.h
new file mode 100644
index 00000000..f95c663a
--- /dev/null
+++ b/include/asm-generic/bitops/le.h
@@ -0,0 +1,87 @@
+#ifndef _ASM_GENERIC_BITOPS_LE_H_
+#define _ASM_GENERIC_BITOPS_LE_H_
+
+#include <asm/types.h>
+#include <asm/byteorder.h>
+
+#if defined(__LITTLE_ENDIAN)
+
+#define BITOP_LE_SWIZZLE	0
+
+static inline unsigned long find_next_zero_bit_le(const void *addr,
+		unsigned long size, unsigned long offset)
+{
+	return find_next_zero_bit(addr, size, offset);
+}
+
+static inline unsigned long find_next_bit_le(const void *addr,
+		unsigned long size, unsigned long offset)
+{
+	return find_next_bit(addr, size, offset);
+}
+
+static inline unsigned long find_first_zero_bit_le(const void *addr,
+		unsigned long size)
+{
+	return find_first_zero_bit(addr, size);
+}
+
+#elif defined(__BIG_ENDIAN)
+
+#define BITOP_LE_SWIZZLE	((BITS_PER_LONG-1) & ~0x7)
+
+#ifndef find_next_zero_bit_le
+extern unsigned long find_next_zero_bit_le(const void *addr,
+		unsigned long size, unsigned long offset);
+#endif
+
+#ifndef find_next_bit_le
+extern unsigned long find_next_bit_le(const void *addr,
+		unsigned long size, unsigned long offset);
+#endif
+
+#ifndef find_first_zero_bit_le
+#define find_first_zero_bit_le(addr, size) \
+	find_next_zero_bit_le((addr), (size), 0)
+#endif
+
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+
+static inline int test_bit_le(int nr, const void *addr)
+{
+	return test_bit(nr ^ BITOP_LE_SWIZZLE, addr);
+}
+
+static inline void __set_bit_le(int nr, void *addr)
+{
+	__set_bit(nr ^ BITOP_LE_SWIZZLE, addr);
+}
+
+static inline void __clear_bit_le(int nr, void *addr)
+{
+	__clear_bit(nr ^ BITOP_LE_SWIZZLE, addr);
+}
+
+static inline int test_and_set_bit_le(int nr, void *addr)
+{
+	return test_and_set_bit(nr ^ BITOP_LE_SWIZZLE, addr);
+}
+
+static inline int test_and_clear_bit_le(int nr, void *addr)
+{
+	return test_and_clear_bit(nr ^ BITOP_LE_SWIZZLE, addr);
+}
+
+static inline int __test_and_set_bit_le(int nr, void *addr)
+{
+	return __test_and_set_bit(nr ^ BITOP_LE_SWIZZLE, addr);
+}
+
+static inline int __test_and_clear_bit_le(int nr, void *addr)
+{
+	return __test_and_clear_bit(nr ^ BITOP_LE_SWIZZLE, addr);
+}
+
+#endif /* _ASM_GENERIC_BITOPS_LE_H_ */
diff --git a/include/asm-generic/bitops/lock.h b/include/asm-generic/bitops/lock.h
new file mode 100644
index 00000000..308a9e22
--- /dev/null
+++ b/include/asm-generic/bitops/lock.h
@@ -0,0 +1,45 @@
+#ifndef _ASM_GENERIC_BITOPS_LOCK_H_
+#define _ASM_GENERIC_BITOPS_LOCK_H_
+
+/**
+ * test_and_set_bit_lock - Set a bit and return its old value, for lock
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and provides acquire barrier semantics.
+ * It can be used to implement bit locks.
+ */
+#define test_and_set_bit_lock(nr, addr)	test_and_set_bit(nr, addr)
+
+/**
+ * clear_bit_unlock - Clear a bit in memory, for unlock
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This operation is atomic and provides release barrier semantics.
+ */
+#define clear_bit_unlock(nr, addr)	\
+do {					\
+	smp_mb__before_clear_bit();	\
+	clear_bit(nr, addr);		\
+} while (0)
+
+/**
+ * __clear_bit_unlock - Clear a bit in memory, for unlock
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This operation is like clear_bit_unlock, however it is not atomic.
+ * It does provide release barrier semantics so it can be used to unlock
+ * a bit lock, however it would only be used if no other CPU can modify
+ * any bits in the memory until the lock is released (a good example is
+ * if the bit lock itself protects access to the other bits in the word).
+ */
+#define __clear_bit_unlock(nr, addr)	\
+do {					\
+	smp_mb();			\
+	__clear_bit(nr, addr);		\
+} while (0)
+
+#endif /* _ASM_GENERIC_BITOPS_LOCK_H_ */
+
diff --git a/include/asm-generic/bitops/non-atomic.h b/include/asm-generic/bitops/non-atomic.h
new file mode 100644
index 00000000..697cc2b7
--- /dev/null
+++ b/include/asm-generic/bitops/non-atomic.h
@@ -0,0 +1,108 @@
+#ifndef _ASM_GENERIC_BITOPS_NON_ATOMIC_H_
+#define _ASM_GENERIC_BITOPS_NON_ATOMIC_H_
+
+#include <asm/types.h>
+
+/**
+ * __set_bit - Set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * Unlike set_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static inline void __set_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+
+	*p  |= mask;
+}
+
+static inline void __clear_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+
+	*p &= ~mask;
+}
+
+/**
+ * __change_bit - Toggle a bit in memory
+ * @nr: the bit to change
+ * @addr: the address to start counting from
+ *
+ * Unlike change_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static inline void __change_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+
+	*p ^= mask;
+}
+
+/**
+ * __test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static inline int __test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old = *p;
+
+	*p = old | mask;
+	return (old & mask) != 0;
+}
+
+/**
+ * __test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old = *p;
+
+	*p = old & ~mask;
+	return (old & mask) != 0;
+}
+
+/* WARNING: non atomic and it can be reordered! */
+static inline int __test_and_change_bit(int nr,
+					    volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old = *p;
+
+	*p = old ^ mask;
+	return (old & mask) != 0;
+}
+
+/**
+ * test_bit - Determine whether a bit is set
+ * @nr: bit number to test
+ * @addr: Address to start counting from
+ */
+static inline int test_bit(int nr, const volatile unsigned long *addr)
+{
+	return 1UL & (addr[BIT_WORD(nr)] >> (nr & (BITS_PER_LONG-1)));
+}
+
+#endif /* _ASM_GENERIC_BITOPS_NON_ATOMIC_H_ */
diff --git a/include/asm-generic/bitops/sched.h b/include/asm-generic/bitops/sched.h
new file mode 100644
index 00000000..604fab70
--- /dev/null
+++ b/include/asm-generic/bitops/sched.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_GENERIC_BITOPS_SCHED_H_
+#define _ASM_GENERIC_BITOPS_SCHED_H_
+
+#include <linux/compiler.h>	/* unlikely() */
+#include <asm/types.h>
+
+/*
+ * Every architecture must define this function. It's the fastest
+ * way of searching a 100-bit bitmap.  It's guaranteed that at least
+ * one of the 100 bits is cleared.
+ */
+static inline int sched_find_first_bit(const unsigned long *b)
+{
+#if BITS_PER_LONG == 64
+	if (b[0])
+		return __ffs(b[0]);
+	return __ffs(b[1]) + 64;
+#elif BITS_PER_LONG == 32
+	if (b[0])
+		return __ffs(b[0]);
+	if (b[1])
+		return __ffs(b[1]) + 32;
+	if (b[2])
+		return __ffs(b[2]) + 64;
+	return __ffs(b[3]) + 96;
+#else
+#error BITS_PER_LONG not defined
+#endif
+}
+
+#endif /* _ASM_GENERIC_BITOPS_SCHED_H_ */
diff --git a/include/asm-generic/bitsperlong.h b/include/asm-generic/bitsperlong.h
new file mode 100644
index 00000000..4ae54e07
--- /dev/null
+++ b/include/asm-generic/bitsperlong.h
@@ -0,0 +1,32 @@
+#ifndef __ASM_GENERIC_BITS_PER_LONG
+#define __ASM_GENERIC_BITS_PER_LONG
+
+/*
+ * There seems to be no way of detecting this automatically from user
+ * space, so 64 bit architectures should override this in their
+ * bitsperlong.h. In particular, an architecture that supports
+ * both 32 and 64 bit user space must not rely on CONFIG_64BIT
+ * to decide it, but rather check a compiler provided macro.
+ */
+#ifndef __BITS_PER_LONG
+#define __BITS_PER_LONG 32
+#endif
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_64BIT
+#define BITS_PER_LONG 64
+#else
+#define BITS_PER_LONG 32
+#endif /* CONFIG_64BIT */
+
+/*
+ * FIXME: The check currently breaks x86-64 build, so it's
+ * temporarily disabled. Please fix x86-64 and reenable
+ */
+#if 0 && BITS_PER_LONG != __BITS_PER_LONG
+#error Inconsistent word size. Check asm/bitsperlong.h
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_GENERIC_BITS_PER_LONG */
diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h
new file mode 100644
index 00000000..2520a6e2
--- /dev/null
+++ b/include/asm-generic/bug.h
@@ -0,0 +1,205 @@
+#ifndef _ASM_GENERIC_BUG_H
+#define _ASM_GENERIC_BUG_H
+
+#include <linux/compiler.h>
+
+#ifdef CONFIG_BUG
+
+#ifdef CONFIG_GENERIC_BUG
+#ifndef __ASSEMBLY__
+struct bug_entry {
+#ifndef CONFIG_GENERIC_BUG_RELATIVE_POINTERS
+	unsigned long	bug_addr;
+#else
+	signed int	bug_addr_disp;
+#endif
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+#ifndef CONFIG_GENERIC_BUG_RELATIVE_POINTERS
+	const char	*file;
+#else
+	signed int	file_disp;
+#endif
+	unsigned short	line;
+#endif
+	unsigned short	flags;
+};
+#endif		/* __ASSEMBLY__ */
+
+#define BUGFLAG_WARNING		(1 << 0)
+#define BUGFLAG_TAINT(taint)	(BUGFLAG_WARNING | ((taint) << 8))
+#define BUG_GET_TAINT(bug)	((bug)->flags >> 8)
+
+#endif	/* CONFIG_GENERIC_BUG */
+
+/*
+ * Don't use BUG() or BUG_ON() unless there's really no way out; one
+ * example might be detecting data structure corruption in the middle
+ * of an operation that can't be backed out of.  If the (sub)system
+ * can somehow continue operating, perhaps with reduced functionality,
+ * it's probably not BUG-worthy.
+ *
+ * If you're tempted to BUG(), think again:  is completely giving up
+ * really the *only* solution?  There are usually better options, where
+ * users don't need to reboot ASAP and can mostly shut down cleanly.
+ */
+#ifndef HAVE_ARCH_BUG
+#define BUG() do { \
+	printk("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
+	panic("BUG!"); \
+} while (0)
+#endif
+
+#ifndef HAVE_ARCH_BUG_ON
+#define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while(0)
+#endif
+
+/*
+ * WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report
+ * significant issues that need prompt attention if they should ever
+ * appear at runtime.  Use the versions with printk format strings
+ * to provide better diagnostics.
+ */
+#ifndef __WARN_TAINT
+#ifndef __ASSEMBLY__
+extern __printf(3, 4)
+void warn_slowpath_fmt(const char *file, const int line,
+		       const char *fmt, ...);
+extern __printf(4, 5)
+void warn_slowpath_fmt_taint(const char *file, const int line, unsigned taint,
+			     const char *fmt, ...);
+extern void warn_slowpath_null(const char *file, const int line);
+#define WANT_WARN_ON_SLOWPATH
+#endif
+#define __WARN()		warn_slowpath_null(__FILE__, __LINE__)
+#define __WARN_printf(arg...)	warn_slowpath_fmt(__FILE__, __LINE__, arg)
+#define __WARN_printf_taint(taint, arg...)				\
+	warn_slowpath_fmt_taint(__FILE__, __LINE__, taint, arg)
+#else
+#define __WARN()		__WARN_TAINT(TAINT_WARN)
+#define __WARN_printf(arg...)	do { printk(arg); __WARN(); } while (0)
+#define __WARN_printf_taint(taint, arg...)				\
+	do { printk(arg); __WARN_TAINT(taint); } while (0)
+#endif
+
+#ifndef WARN_ON
+#define WARN_ON(condition) ({						\
+	int __ret_warn_on = !!(condition);				\
+	if (unlikely(__ret_warn_on))					\
+		__WARN();						\
+	unlikely(__ret_warn_on);					\
+})
+#endif
+
+#ifndef WARN
+#define WARN(condition, format...) ({						\
+	int __ret_warn_on = !!(condition);				\
+	if (unlikely(__ret_warn_on))					\
+		__WARN_printf(format);					\
+	unlikely(__ret_warn_on);					\
+})
+#endif
+
+#define WARN_TAINT(condition, taint, format...) ({			\
+	int __ret_warn_on = !!(condition);				\
+	if (unlikely(__ret_warn_on))					\
+		__WARN_printf_taint(taint, format);			\
+	unlikely(__ret_warn_on);					\
+})
+
+#else /* !CONFIG_BUG */
+#ifndef HAVE_ARCH_BUG
+#define BUG() do {} while(0)
+#endif
+
+#ifndef HAVE_ARCH_BUG_ON
+#define BUG_ON(condition) do { if (condition) ; } while(0)
+#endif
+
+#ifndef HAVE_ARCH_WARN_ON
+#define WARN_ON(condition) ({						\
+	int __ret_warn_on = !!(condition);				\
+	unlikely(__ret_warn_on);					\
+})
+#endif
+
+#ifndef WARN
+#define WARN(condition, format...) ({					\
+	int __ret_warn_on = !!(condition);				\
+	unlikely(__ret_warn_on);					\
+})
+#endif
+
+#define WARN_TAINT(condition, taint, format...) WARN_ON(condition)
+
+#endif
+
+#define WARN_ON_ONCE(condition)	({				\
+	static bool __section(.data.unlikely) __warned;		\
+	int __ret_warn_once = !!(condition);			\
+								\
+	if (unlikely(__ret_warn_once))				\
+		if (WARN_ON(!__warned)) 			\
+			__warned = true;			\
+	unlikely(__ret_warn_once);				\
+})
+
+#define WARN_ONCE(condition, format...)	({			\
+	static bool __section(.data.unlikely) __warned;		\
+	int __ret_warn_once = !!(condition);			\
+								\
+	if (unlikely(__ret_warn_once))				\
+		if (WARN(!__warned, format)) 			\
+			__warned = true;			\
+	unlikely(__ret_warn_once);				\
+})
+
+#define WARN_TAINT_ONCE(condition, taint, format...)	({	\
+	static bool __section(.data.unlikely) __warned;		\
+	int __ret_warn_once = !!(condition);			\
+								\
+	if (unlikely(__ret_warn_once))				\
+		if (WARN_TAINT(!__warned, taint, format))	\
+			__warned = true;			\
+	unlikely(__ret_warn_once);				\
+})
+
+/*
+ * WARN_ON_SMP() is for cases that the warning is either
+ * meaningless for !SMP or may even cause failures.
+ * This is usually used for cases that we have
+ * WARN_ON(!spin_is_locked(&lock)) checks, as spin_is_locked()
+ * returns 0 for uniprocessor settings.
+ * It can also be used with values that are only defined
+ * on SMP:
+ *
+ * struct foo {
+ *  [...]
+ * #ifdef CONFIG_SMP
+ *	int bar;
+ * #endif
+ * };
+ *
+ * void func(struct foo *zoot)
+ * {
+ *	WARN_ON_SMP(!zoot->bar);
+ *
+ * For CONFIG_SMP, WARN_ON_SMP() should act the same as WARN_ON(),
+ * and should be a nop and return false for uniprocessor.
+ *
+ * if (WARN_ON_SMP(x)) returns true only when CONFIG_SMP is set
+ * and x is true.
+ */
+#ifdef CONFIG_SMP
+# define WARN_ON_SMP(x)			WARN_ON(x)
+#else
+/*
+ * Use of ({0;}) because WARN_ON_SMP(x) may be used either as
+ * a stand alone line statement or as a condition in an if ()
+ * statement.
+ * A simple "0" would cause gcc to give a "statement has no effect"
+ * warning.
+ */
+# define WARN_ON_SMP(x)			({0;})
+#endif
+
+#endif
diff --git a/include/asm-generic/bugs.h b/include/asm-generic/bugs.h
new file mode 100644
index 00000000..6c4f62ea
--- /dev/null
+++ b/include/asm-generic/bugs.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_GENERIC_BUGS_H
+#define __ASM_GENERIC_BUGS_H
+/*
+ * This file is included by 'init/main.c' to check for
+ * architecture-dependent bugs.
+ */
+
+static inline void check_bugs(void) { }
+
+#endif	/* __ASM_GENERIC_BUGS_H */
diff --git a/include/asm-generic/cache.h b/include/asm-generic/cache.h
new file mode 100644
index 00000000..1bfcfe5c
--- /dev/null
+++ b/include/asm-generic/cache.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_GENERIC_CACHE_H
+#define __ASM_GENERIC_CACHE_H
+/*
+ * 32 bytes appears to be the most common cache line size,
+ * so make that the default here. Architectures with larger
+ * cache lines need to provide their own cache.h.
+ */
+
+#define L1_CACHE_SHIFT		5
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+#endif /* __ASM_GENERIC_CACHE_H */
diff --git a/include/asm-generic/cacheflush.h b/include/asm-generic/cacheflush.h
new file mode 100644
index 00000000..87bc536c
--- /dev/null
+++ b/include/asm-generic/cacheflush.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_CACHEFLUSH_H
+#define __ASM_CACHEFLUSH_H
+
+/* Keep includes the same across arches.  */
+#include <linux/mm.h>
+
+/*
+ * The cache doesn't need to be flushed when TLB entries change when
+ * the cache is mapped to physical memory, not virtual memory
+ */
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_dup_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_icache_range(start, end)		do { } while (0)
+#define flush_icache_page(vma,pg)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	do { \
+		memcpy(dst, src, len); \
+		flush_icache_user_range(vma, page, vaddr, len); \
+	} while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+#endif /* __ASM_CACHEFLUSH_H */
diff --git a/include/asm-generic/checksum.h b/include/asm-generic/checksum.h
new file mode 100644
index 00000000..c084767c
--- /dev/null
+++ b/include/asm-generic/checksum.h
@@ -0,0 +1,83 @@
+#ifndef __ASM_GENERIC_CHECKSUM_H
+#define __ASM_GENERIC_CHECKSUM_H
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+extern __wsum csum_partial_copy(const void *src, void *dst, int len, __wsum sum);
+
+/*
+ * the same as csum_partial_copy, but copies from user space.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+					int len, __wsum sum, int *csum_err);
+
+#ifndef csum_partial_copy_nocheck
+#define csum_partial_copy_nocheck(src, dst, len, sum)	\
+	csum_partial_copy((src), (dst), (len), (sum))
+#endif
+
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries.
+ */
+extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+/*
+ * Fold a partial checksum
+ */
+static inline __sum16 csum_fold(__wsum csum)
+{
+	u32 sum = (__force u32)csum;
+	sum = (sum & 0xffff) + (sum >> 16);
+	sum = (sum & 0xffff) + (sum >> 16);
+	return (__force __sum16)~sum;
+}
+
+#ifndef csum_tcpudp_nofold
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+extern __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+		unsigned short proto, __wsum sum);
+#endif
+
+#ifndef csum_tcpudp_magic
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+		  unsigned short proto, __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+#endif
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+extern __sum16 ip_compute_csum(const void *buff, int len);
+
+#endif /* __ASM_GENERIC_CHECKSUM_H */
diff --git a/include/asm-generic/cmpxchg-local.h b/include/asm-generic/cmpxchg-local.h
new file mode 100644
index 00000000..2533fddd
--- /dev/null
+++ b/include/asm-generic/cmpxchg-local.h
@@ -0,0 +1,66 @@
+#ifndef __ASM_GENERIC_CMPXCHG_LOCAL_H
+#define __ASM_GENERIC_CMPXCHG_LOCAL_H
+
+#include <linux/types.h>
+#include <linux/irqflags.h>
+
+extern unsigned long wrong_size_cmpxchg(volatile void *ptr);
+
+/*
+ * Generic version of __cmpxchg_local (disables interrupts). Takes an unsigned
+ * long parameter, supporting various types of architectures.
+ */
+static inline unsigned long __cmpxchg_local_generic(volatile void *ptr,
+		unsigned long old, unsigned long new, int size)
+{
+	unsigned long flags, prev;
+
+	/*
+	 * Sanity checking, compile-time.
+	 */
+	if (size == 8 && sizeof(unsigned long) != 8)
+		wrong_size_cmpxchg(ptr);
+
+	local_irq_save(flags);
+	switch (size) {
+	case 1: prev = *(u8 *)ptr;
+		if (prev == old)
+			*(u8 *)ptr = (u8)new;
+		break;
+	case 2: prev = *(u16 *)ptr;
+		if (prev == old)
+			*(u16 *)ptr = (u16)new;
+		break;
+	case 4: prev = *(u32 *)ptr;
+		if (prev == old)
+			*(u32 *)ptr = (u32)new;
+		break;
+	case 8: prev = *(u64 *)ptr;
+		if (prev == old)
+			*(u64 *)ptr = (u64)new;
+		break;
+	default:
+		wrong_size_cmpxchg(ptr);
+	}
+	local_irq_restore(flags);
+	return prev;
+}
+
+/*
+ * Generic version of __cmpxchg64_local. Takes an u64 parameter.
+ */
+static inline u64 __cmpxchg64_local_generic(volatile void *ptr,
+		u64 old, u64 new)
+{
+	u64 prev;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	prev = *(u64 *)ptr;
+	if (prev == old)
+		*(u64 *)ptr = new;
+	local_irq_restore(flags);
+	return prev;
+}
+
+#endif
diff --git a/include/asm-generic/cmpxchg.h b/include/asm-generic/cmpxchg.h
new file mode 100644
index 00000000..14883026
--- /dev/null
+++ b/include/asm-generic/cmpxchg.h
@@ -0,0 +1,98 @@
+/*
+ * Generic UP xchg and cmpxchg using interrupt disablement.  Does not
+ * support SMP.
+ */
+
+#ifndef __ASM_GENERIC_CMPXCHG_H
+#define __ASM_GENERIC_CMPXCHG_H
+
+#ifdef CONFIG_SMP
+#error "Cannot use generic cmpxchg on SMP"
+#endif
+
+#include <linux/types.h>
+#include <linux/irqflags.h>
+
+#ifndef xchg
+
+/*
+ * This function doesn't exist, so you'll get a linker error if
+ * something tries to do an invalidly-sized xchg().
+ */
+extern void __xchg_called_with_bad_pointer(void);
+
+static inline
+unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
+{
+	unsigned long ret, flags;
+
+	switch (size) {
+	case 1:
+#ifdef __xchg_u8
+		return __xchg_u8(x, ptr);
+#else
+		local_irq_save(flags);
+		ret = *(volatile u8 *)ptr;
+		*(volatile u8 *)ptr = x;
+		local_irq_restore(flags);
+		return ret;
+#endif /* __xchg_u8 */
+
+	case 2:
+#ifdef __xchg_u16
+		return __xchg_u16(x, ptr);
+#else
+		local_irq_save(flags);
+		ret = *(volatile u16 *)ptr;
+		*(volatile u16 *)ptr = x;
+		local_irq_restore(flags);
+		return ret;
+#endif /* __xchg_u16 */
+
+	case 4:
+#ifdef __xchg_u32
+		return __xchg_u32(x, ptr);
+#else
+		local_irq_save(flags);
+		ret = *(volatile u32 *)ptr;
+		*(volatile u32 *)ptr = x;
+		local_irq_restore(flags);
+		return ret;
+#endif /* __xchg_u32 */
+
+#ifdef CONFIG_64BIT
+	case 8:
+#ifdef __xchg_u64
+		return __xchg_u64(x, ptr);
+#else
+		local_irq_save(flags);
+		ret = *(volatile u64 *)ptr;
+		*(volatile u64 *)ptr = x;
+		local_irq_restore(flags);
+		return ret;
+#endif /* __xchg_u64 */
+#endif /* CONFIG_64BIT */
+
+	default:
+		__xchg_called_with_bad_pointer();
+		return x;
+	}
+}
+
+#define xchg(ptr, x) \
+	((__typeof__(*(ptr))) __xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
+
+#endif /* xchg */
+
+/*
+ * Atomic compare and exchange.
+ *
+ * Do not define __HAVE_ARCH_CMPXCHG because we want to use it to check whether
+ * a cmpxchg primitive faster than repeated local irq save/restore exists.
+ */
+#include <asm-generic/cmpxchg-local.h>
+
+#define cmpxchg(ptr, o, n)	cmpxchg_local((ptr), (o), (n))
+#define cmpxchg64(ptr, o, n)	cmpxchg64_local((ptr), (o), (n))
+
+#endif /* __ASM_GENERIC_CMPXCHG_H */
diff --git a/include/asm-generic/cputime.h b/include/asm-generic/cputime.h
new file mode 100644
index 00000000..9a62937c
--- /dev/null
+++ b/include/asm-generic/cputime.h
@@ -0,0 +1,69 @@
+#ifndef _ASM_GENERIC_CPUTIME_H
+#define _ASM_GENERIC_CPUTIME_H
+
+#include <linux/time.h>
+#include <linux/jiffies.h>
+
+typedef unsigned long __nocast cputime_t;
+
+#define cputime_one_jiffy		jiffies_to_cputime(1)
+#define cputime_to_jiffies(__ct)	(__force unsigned long)(__ct)
+#define cputime_to_scaled(__ct)		(__ct)
+#define jiffies_to_cputime(__hz)	(__force cputime_t)(__hz)
+
+typedef u64 __nocast cputime64_t;
+
+#define cputime64_to_jiffies64(__ct)	(__force u64)(__ct)
+#define jiffies64_to_cputime64(__jif)	(__force cputime64_t)(__jif)
+
+#define nsecs_to_cputime64(__ct)	\
+	jiffies64_to_cputime64(nsecs_to_jiffies64(__ct))
+
+
+/*
+ * Convert cputime to microseconds and back.
+ */
+#define cputime_to_usecs(__ct)		\
+	jiffies_to_usecs(cputime_to_jiffies(__ct))
+#define usecs_to_cputime(__usec)	\
+	jiffies_to_cputime(usecs_to_jiffies(__usec))
+#define usecs_to_cputime64(__usec)	\
+	jiffies64_to_cputime64(nsecs_to_jiffies64((__usec) * 1000))
+
+/*
+ * Convert cputime to seconds and back.
+ */
+#define cputime_to_secs(jif)		(cputime_to_jiffies(jif) / HZ)
+#define secs_to_cputime(sec)		jiffies_to_cputime((sec) * HZ)
+
+/*
+ * Convert cputime to timespec and back.
+ */
+#define timespec_to_cputime(__val)	\
+	jiffies_to_cputime(timespec_to_jiffies(__val))
+#define cputime_to_timespec(__ct,__val)	\
+	jiffies_to_timespec(cputime_to_jiffies(__ct),__val)
+
+/*
+ * Convert cputime to timeval and back.
+ */
+#define timeval_to_cputime(__val)	\
+	jiffies_to_cputime(timeval_to_jiffies(__val))
+#define cputime_to_timeval(__ct,__val)	\
+	jiffies_to_timeval(cputime_to_jiffies(__ct),__val)
+
+/*
+ * Convert cputime to clock and back.
+ */
+#define cputime_to_clock_t(__ct)	\
+	jiffies_to_clock_t(cputime_to_jiffies(__ct))
+#define clock_t_to_cputime(__x)		\
+	jiffies_to_cputime(clock_t_to_jiffies(__x))
+
+/*
+ * Convert cputime64 to clock.
+ */
+#define cputime64_to_clock_t(__ct)	\
+	jiffies_64_to_clock_t(cputime64_to_jiffies64(__ct))
+
+#endif
diff --git a/include/asm-generic/current.h b/include/asm-generic/current.h
new file mode 100644
index 00000000..5e86f6ae
--- /dev/null
+++ b/include/asm-generic/current.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_GENERIC_CURRENT_H
+#define __ASM_GENERIC_CURRENT_H
+
+#include <linux/thread_info.h>
+
+#define get_current() (current_thread_info()->task)
+#define current get_current()
+
+#endif /* __ASM_GENERIC_CURRENT_H */
diff --git a/include/asm-generic/delay.h b/include/asm-generic/delay.h
new file mode 100644
index 00000000..0f79054c
--- /dev/null
+++ b/include/asm-generic/delay.h
@@ -0,0 +1,44 @@
+#ifndef __ASM_GENERIC_DELAY_H
+#define __ASM_GENERIC_DELAY_H
+
+/* Undefined functions to get compile-time errors */
+extern void __bad_udelay(void);
+extern void __bad_ndelay(void);
+
+extern void __udelay(unsigned long usecs);
+extern void __ndelay(unsigned long nsecs);
+extern void __const_udelay(unsigned long xloops);
+extern void __delay(unsigned long loops);
+
+/*
+ * The weird n/20000 thing suppresses a "comparison is always false due to
+ * limited range of data type" warning with non-const 8-bit arguments.
+ */
+
+/* 0x10c7 is 2**32 / 1000000 (rounded up) */
+#define udelay(n)							\
+	({								\
+		if (__builtin_constant_p(n)) {				\
+			if ((n) / 20000 >= 1)				\
+				 __bad_udelay();			\
+			else						\
+				__const_udelay((n) * 0x10c7ul);		\
+		} else {						\
+			__udelay(n);					\
+		}							\
+	})
+
+/* 0x5 is 2**32 / 1000000000 (rounded up) */
+#define ndelay(n)							\
+	({								\
+		if (__builtin_constant_p(n)) {				\
+			if ((n) / 20000 >= 1)				\
+				__bad_ndelay();				\
+			else						\
+				__const_udelay((n) * 5ul);		\
+		} else {						\
+			__ndelay(n);					\
+		}							\
+	})
+
+#endif /* __ASM_GENERIC_DELAY_H */
diff --git a/include/asm-generic/device.h b/include/asm-generic/device.h
new file mode 100644
index 00000000..d7c76bba
--- /dev/null
+++ b/include/asm-generic/device.h
@@ -0,0 +1,15 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#ifndef _ASM_GENERIC_DEVICE_H
+#define _ASM_GENERIC_DEVICE_H
+
+struct dev_archdata {
+};
+
+struct pdev_archdata {
+};
+
+#endif /* _ASM_GENERIC_DEVICE_H */
diff --git a/include/asm-generic/div64.h b/include/asm-generic/div64.h
new file mode 100644
index 00000000..8f4e3193
--- /dev/null
+++ b/include/asm-generic/div64.h
@@ -0,0 +1,58 @@
+#ifndef _ASM_GENERIC_DIV64_H
+#define _ASM_GENERIC_DIV64_H
+/*
+ * Copyright (C) 2003 Bernardo Innocenti <bernie@develer.com>
+ * Based on former asm-ppc/div64.h and asm-m68knommu/div64.h
+ *
+ * The semantics of do_div() are:
+ *
+ * uint32_t do_div(uint64_t *n, uint32_t base)
+ * {
+ * 	uint32_t remainder = *n % base;
+ * 	*n = *n / base;
+ * 	return remainder;
+ * }
+ *
+ * NOTE: macro parameter n is evaluated multiple times,
+ *       beware of side effects!
+ */
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+#if BITS_PER_LONG == 64
+
+# define do_div(n,base) ({					\
+	uint32_t __base = (base);				\
+	uint32_t __rem;						\
+	__rem = ((uint64_t)(n)) % __base;			\
+	(n) = ((uint64_t)(n)) / __base;				\
+	__rem;							\
+ })
+
+#elif BITS_PER_LONG == 32
+
+extern uint32_t __div64_32(uint64_t *dividend, uint32_t divisor);
+
+/* The unnecessary pointer compare is there
+ * to check for type safety (n must be 64bit)
+ */
+# define do_div(n,base) ({				\
+	uint32_t __base = (base);			\
+	uint32_t __rem;					\
+	(void)(((typeof((n)) *)0) == ((uint64_t *)0));	\
+	if (likely(((n) >> 32) == 0)) {			\
+		__rem = (uint32_t)(n) % __base;		\
+		(n) = (uint32_t)(n) / __base;		\
+	} else 						\
+		__rem = __div64_32(&(n), __base);	\
+	__rem;						\
+ })
+
+#else /* BITS_PER_LONG == ?? */
+
+# error do_div() does not yet support the C64
+
+#endif /* BITS_PER_LONG */
+
+#endif /* _ASM_GENERIC_DIV64_H */
diff --git a/include/asm-generic/dma-coherent.h b/include/asm-generic/dma-coherent.h
new file mode 100644
index 00000000..85a3ffaa
--- /dev/null
+++ b/include/asm-generic/dma-coherent.h
@@ -0,0 +1,32 @@
+#ifndef DMA_COHERENT_H
+#define DMA_COHERENT_H
+
+#ifdef CONFIG_HAVE_GENERIC_DMA_COHERENT
+/*
+ * These two functions are only for dma allocator.
+ * Don't use them in device drivers.
+ */
+int dma_alloc_from_coherent(struct device *dev, ssize_t size,
+				       dma_addr_t *dma_handle, void **ret);
+int dma_release_from_coherent(struct device *dev, int order, void *vaddr);
+
+/*
+ * Standard interface
+ */
+#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
+extern int
+dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
+			    dma_addr_t device_addr, size_t size, int flags);
+
+extern void
+dma_release_declared_memory(struct device *dev);
+
+extern void *
+dma_mark_declared_memory_occupied(struct device *dev,
+				  dma_addr_t device_addr, size_t size);
+#else
+#define dma_alloc_from_coherent(dev, size, handle, ret) (0)
+#define dma_release_from_coherent(dev, order, vaddr) (0)
+#endif
+
+#endif
diff --git a/include/asm-generic/dma-mapping-broken.h b/include/asm-generic/dma-mapping-broken.h
new file mode 100644
index 00000000..ccf7b4f3
--- /dev/null
+++ b/include/asm-generic/dma-mapping-broken.h
@@ -0,0 +1,79 @@
+#ifndef _ASM_GENERIC_DMA_MAPPING_H
+#define _ASM_GENERIC_DMA_MAPPING_H
+
+/* define the dma api to allow compilation but not linking of
+ * dma dependent code.  Code that depends on the dma-mapping
+ * API needs to set 'depends on HAS_DMA' in its Kconfig
+ */
+
+struct scatterlist;
+
+extern void *
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
+		   gfp_t flag);
+
+extern void
+dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
+		    dma_addr_t dma_handle);
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+
+extern dma_addr_t
+dma_map_single(struct device *dev, void *ptr, size_t size,
+	       enum dma_data_direction direction);
+
+extern void
+dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+		 enum dma_data_direction direction);
+
+extern int
+dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+	   enum dma_data_direction direction);
+
+extern void
+dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+	     enum dma_data_direction direction);
+
+extern dma_addr_t
+dma_map_page(struct device *dev, struct page *page, unsigned long offset,
+	     size_t size, enum dma_data_direction direction);
+
+extern void
+dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+	       enum dma_data_direction direction);
+
+extern void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
+			enum dma_data_direction direction);
+
+extern void
+dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
+			      unsigned long offset, size_t size,
+			      enum dma_data_direction direction);
+
+extern void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
+		    enum dma_data_direction direction);
+
+#define dma_sync_single_for_device dma_sync_single_for_cpu
+#define dma_sync_single_range_for_device dma_sync_single_range_for_cpu
+#define dma_sync_sg_for_device dma_sync_sg_for_cpu
+
+extern int
+dma_mapping_error(struct device *dev, dma_addr_t dma_addr);
+
+extern int
+dma_supported(struct device *dev, u64 mask);
+
+extern int
+dma_set_mask(struct device *dev, u64 mask);
+
+extern int
+dma_get_cache_alignment(void);
+
+extern void
+dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+	       enum dma_data_direction direction);
+
+#endif /* _ASM_GENERIC_DMA_MAPPING_H */
diff --git a/include/asm-generic/dma-mapping-common.h b/include/asm-generic/dma-mapping-common.h
new file mode 100644
index 00000000..2e248d89
--- /dev/null
+++ b/include/asm-generic/dma-mapping-common.h
@@ -0,0 +1,179 @@
+#ifndef _ASM_GENERIC_DMA_MAPPING_H
+#define _ASM_GENERIC_DMA_MAPPING_H
+
+#include <linux/kmemcheck.h>
+#include <linux/bug.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-debug.h>
+#include <linux/dma-attrs.h>
+
+static inline dma_addr_t dma_map_single_attrs(struct device *dev, void *ptr,
+					      size_t size,
+					      enum dma_data_direction dir,
+					      struct dma_attrs *attrs)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+	dma_addr_t addr;
+
+	kmemcheck_mark_initialized(ptr, size);
+	BUG_ON(!valid_dma_direction(dir));
+	addr = ops->map_page(dev, virt_to_page(ptr),
+			     (unsigned long)ptr & ~PAGE_MASK, size,
+			     dir, attrs);
+	debug_dma_map_page(dev, virt_to_page(ptr),
+			   (unsigned long)ptr & ~PAGE_MASK, size,
+			   dir, addr, true);
+	return addr;
+}
+
+static inline void dma_unmap_single_attrs(struct device *dev, dma_addr_t addr,
+					  size_t size,
+					  enum dma_data_direction dir,
+					  struct dma_attrs *attrs)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+
+	BUG_ON(!valid_dma_direction(dir));
+	if (ops->unmap_page)
+		ops->unmap_page(dev, addr, size, dir, attrs);
+	debug_dma_unmap_page(dev, addr, size, dir, true);
+}
+
+static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg,
+				   int nents, enum dma_data_direction dir,
+				   struct dma_attrs *attrs)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+	int i, ents;
+	struct scatterlist *s;
+
+	for_each_sg(sg, s, nents, i)
+		kmemcheck_mark_initialized(sg_virt(s), s->length);
+	BUG_ON(!valid_dma_direction(dir));
+	ents = ops->map_sg(dev, sg, nents, dir, attrs);
+	debug_dma_map_sg(dev, sg, nents, ents, dir);
+
+	return ents;
+}
+
+static inline void dma_unmap_sg_attrs(struct device *dev, struct scatterlist *sg,
+				      int nents, enum dma_data_direction dir,
+				      struct dma_attrs *attrs)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+
+	BUG_ON(!valid_dma_direction(dir));
+	debug_dma_unmap_sg(dev, sg, nents, dir);
+	if (ops->unmap_sg)
+		ops->unmap_sg(dev, sg, nents, dir, attrs);
+}
+
+static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
+				      size_t offset, size_t size,
+				      enum dma_data_direction dir)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+	dma_addr_t addr;
+
+	kmemcheck_mark_initialized(page_address(page) + offset, size);
+	BUG_ON(!valid_dma_direction(dir));
+	addr = ops->map_page(dev, page, offset, size, dir, NULL);
+	debug_dma_map_page(dev, page, offset, size, dir, addr, false);
+
+	return addr;
+}
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t addr,
+				  size_t size, enum dma_data_direction dir)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+
+	BUG_ON(!valid_dma_direction(dir));
+	if (ops->unmap_page)
+		ops->unmap_page(dev, addr, size, dir, NULL);
+	debug_dma_unmap_page(dev, addr, size, dir, false);
+}
+
+static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t addr,
+					   size_t size,
+					   enum dma_data_direction dir)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+
+	BUG_ON(!valid_dma_direction(dir));
+	if (ops->sync_single_for_cpu)
+		ops->sync_single_for_cpu(dev, addr, size, dir);
+	debug_dma_sync_single_for_cpu(dev, addr, size, dir);
+}
+
+static inline void dma_sync_single_for_device(struct device *dev,
+					      dma_addr_t addr, size_t size,
+					      enum dma_data_direction dir)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+
+	BUG_ON(!valid_dma_direction(dir));
+	if (ops->sync_single_for_device)
+		ops->sync_single_for_device(dev, addr, size, dir);
+	debug_dma_sync_single_for_device(dev, addr, size, dir);
+}
+
+static inline void dma_sync_single_range_for_cpu(struct device *dev,
+						 dma_addr_t addr,
+						 unsigned long offset,
+						 size_t size,
+						 enum dma_data_direction dir)
+{
+	const struct dma_map_ops *ops = get_dma_ops(dev);
+
+	BUG_ON(!valid_dma_direction(dir));
+	if (ops->sync_single_for_cpu)
+		ops->sync_single_for_cpu(dev, addr + offset, size, dir);
+	debug_dma_sync_single_range_for_cpu(dev, addr, offset, size, dir);
+}
+
+static inline void dma_sync_single_range_for_device(struct device *dev,
+						    dma_addr_t addr,
+						    unsigned long offset,
+						    size_t size,
+						    enum dma_data_direction dir)
+{
+	const struct dma_map_ops *ops = get_dma_ops(dev);
+
+	BUG_ON(!valid_dma_direction(dir));
+	if (ops->sync_single_for_device)
+		ops->sync_single_for_device(dev, addr + offset, size, dir);
+	debug_dma_sync_single_range_for_device(dev, addr, offset, size, dir);
+}
+
+static inline void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+		    int nelems, enum dma_data_direction dir)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+
+	BUG_ON(!valid_dma_direction(dir));
+	if (ops->sync_sg_for_cpu)
+		ops->sync_sg_for_cpu(dev, sg, nelems, dir);
+	debug_dma_sync_sg_for_cpu(dev, sg, nelems, dir);
+}
+
+static inline void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+		       int nelems, enum dma_data_direction dir)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+
+	BUG_ON(!valid_dma_direction(dir));
+	if (ops->sync_sg_for_device)
+		ops->sync_sg_for_device(dev, sg, nelems, dir);
+	debug_dma_sync_sg_for_device(dev, sg, nelems, dir);
+
+}
+
+#define dma_map_single(d, a, s, r) dma_map_single_attrs(d, a, s, r, NULL)
+#define dma_unmap_single(d, a, s, r) dma_unmap_single_attrs(d, a, s, r, NULL)
+#define dma_map_sg(d, s, n, r) dma_map_sg_attrs(d, s, n, r, NULL)
+#define dma_unmap_sg(d, s, n, r) dma_unmap_sg_attrs(d, s, n, r, NULL)
+
+#endif
diff --git a/include/asm-generic/dma.h b/include/asm-generic/dma.h
new file mode 100644
index 00000000..9dfc3a7f
--- /dev/null
+++ b/include/asm-generic/dma.h
@@ -0,0 +1,15 @@
+#ifndef __ASM_GENERIC_DMA_H
+#define __ASM_GENERIC_DMA_H
+/*
+ * This file traditionally describes the i8237 PC style DMA controller.
+ * Most architectures don't have these any more and can get the minimal
+ * implementation from kernel/dma.c by not defining MAX_DMA_CHANNELS.
+ *
+ * Some code relies on seeing MAX_DMA_ADDRESS though.
+ */
+#define MAX_DMA_ADDRESS PAGE_OFFSET
+
+extern int request_dma(unsigned int dmanr, const char *device_id);
+extern void free_dma(unsigned int dmanr);
+
+#endif /* __ASM_GENERIC_DMA_H */
diff --git a/include/asm-generic/emergency-restart.h b/include/asm-generic/emergency-restart.h
new file mode 100644
index 00000000..0d68a1ea
--- /dev/null
+++ b/include/asm-generic/emergency-restart.h
@@ -0,0 +1,9 @@
+#ifndef _ASM_GENERIC_EMERGENCY_RESTART_H
+#define _ASM_GENERIC_EMERGENCY_RESTART_H
+
+static inline void machine_emergency_restart(void)
+{
+	machine_restart(NULL);
+}
+
+#endif /* _ASM_GENERIC_EMERGENCY_RESTART_H */
diff --git a/include/asm-generic/errno-base.h b/include/asm-generic/errno-base.h
new file mode 100644
index 00000000..65115978
--- /dev/null
+++ b/include/asm-generic/errno-base.h
@@ -0,0 +1,39 @@
+#ifndef _ASM_GENERIC_ERRNO_BASE_H
+#define _ASM_GENERIC_ERRNO_BASE_H
+
+#define	EPERM		 1	/* Operation not permitted */
+#define	ENOENT		 2	/* No such file or directory */
+#define	ESRCH		 3	/* No such process */
+#define	EINTR		 4	/* Interrupted system call */
+#define	EIO		 5	/* I/O error */
+#define	ENXIO		 6	/* No such device or address */
+#define	E2BIG		 7	/* Argument list too long */
+#define	ENOEXEC		 8	/* Exec format error */
+#define	EBADF		 9	/* Bad file number */
+#define	ECHILD		10	/* No child processes */
+#define	EAGAIN		11	/* Try again */
+#define	ENOMEM		12	/* Out of memory */
+#define	EACCES		13	/* Permission denied */
+#define	EFAULT		14	/* Bad address */
+#define	ENOTBLK		15	/* Block device required */
+#define	EBUSY		16	/* Device or resource busy */
+#define	EEXIST		17	/* File exists */
+#define	EXDEV		18	/* Cross-device link */
+#define	ENODEV		19	/* No such device */
+#define	ENOTDIR		20	/* Not a directory */
+#define	EISDIR		21	/* Is a directory */
+#define	EINVAL		22	/* Invalid argument */
+#define	ENFILE		23	/* File table overflow */
+#define	EMFILE		24	/* Too many open files */
+#define	ENOTTY		25	/* Not a typewriter */
+#define	ETXTBSY		26	/* Text file busy */
+#define	EFBIG		27	/* File too large */
+#define	ENOSPC		28	/* No space left on device */
+#define	ESPIPE		29	/* Illegal seek */
+#define	EROFS		30	/* Read-only file system */
+#define	EMLINK		31	/* Too many links */
+#define	EPIPE		32	/* Broken pipe */
+#define	EDOM		33	/* Math argument out of domain of func */
+#define	ERANGE		34	/* Math result not representable */
+
+#endif
diff --git a/include/asm-generic/errno.h b/include/asm-generic/errno.h
new file mode 100644
index 00000000..3b626c3e
--- /dev/null
+++ b/include/asm-generic/errno.h
@@ -0,0 +1,116 @@
+#ifndef _ASM_GENERIC_ERRNO_H
+#define _ASM_GENERIC_ERRNO_H
+
+#include <asm-generic/errno-base.h>
+
+#define	EDEADLK		35	/* Resource deadlock would occur */
+#define	ENAMETOOLONG	36	/* File name too long */
+#define	ENOLCK		37	/* No record locks available */
+#define	ENOSYS		38	/* Function not implemented */
+#define	ENOTEMPTY	39	/* Directory not empty */
+#define	ELOOP		40	/* Too many symbolic links encountered */
+#define	EWOULDBLOCK	EAGAIN	/* Operation would block */
+#define	ENOMSG		42	/* No message of desired type */
+#define	EIDRM		43	/* Identifier removed */
+#define	ECHRNG		44	/* Channel number out of range */
+#define	EL2NSYNC	45	/* Level 2 not synchronized */
+#define	EL3HLT		46	/* Level 3 halted */
+#define	EL3RST		47	/* Level 3 reset */
+#define	ELNRNG		48	/* Link number out of range */
+#define	EUNATCH		49	/* Protocol driver not attached */
+#define	ENOCSI		50	/* No CSI structure available */
+#define	EL2HLT		51	/* Level 2 halted */
+#define	EBADE		52	/* Invalid exchange */
+#define	EBADR		53	/* Invalid request descriptor */
+#define	EXFULL		54	/* Exchange full */
+#define	ENOANO		55	/* No anode */
+#define	EBADRQC		56	/* Invalid request code */
+#define	EBADSLT		57	/* Invalid slot */
+
+#define	EDEADLOCK	EDEADLK
+
+#define	EBFONT		59	/* Bad font file format */
+#define	ENOSTR		60	/* Device not a stream */
+#define	ENODATA		61	/* No data available */
+#define	ETIME		62	/* Timer expired */
+#define	ENOSR		63	/* Out of streams resources */
+#define	ENONET		64	/* Machine is not on the network */
+#define	ENOPKG		65	/* Package not installed */
+#define	EREMOTE		66	/* Object is remote */
+#define	ENOLINK		67	/* Link has been severed */
+#define	EADV		68	/* Advertise error */
+#define	ESRMNT		69	/* Srmount error */
+#define	ECOMM		70	/* Communication error on send */
+#define	EPROTO		71	/* Protocol error */
+#define	EMULTIHOP	72	/* Multihop attempted */
+#define	EDOTDOT		73	/* RFS specific error */
+#define	EBADMSG		74	/* Not a data message */
+#define	EOVERFLOW	75	/* Value too large for defined data type */
+#define	ENOTUNIQ	76	/* Name not unique on network */
+#define	EBADFD		77	/* File descriptor in bad state */
+#define	EREMCHG		78	/* Remote address changed */
+#define	ELIBACC		79	/* Can not access a needed shared library */
+#define	ELIBBAD		80	/* Accessing a corrupted shared library */
+#define	ELIBSCN		81	/* .lib section in a.out corrupted */
+#define	ELIBMAX		82	/* Attempting to link in too many shared libraries */
+#define	ELIBEXEC	83	/* Cannot exec a shared library directly */
+#define	EILSEQ		84	/* Illegal byte sequence */
+#define	ERESTART	85	/* Interrupted system call should be restarted */
+#define	ESTRPIPE	86	/* Streams pipe error */
+#define	EUSERS		87	/* Too many users */
+#define	ENOTSOCK	88	/* Socket operation on non-socket */
+#define	EDESTADDRREQ	89	/* Destination address required */
+#define	EMSGSIZE	90	/* Message too long */
+#define	EPROTOTYPE	91	/* Protocol wrong type for socket */
+#define	ENOPROTOOPT	92	/* Protocol not available */
+#define	EPROTONOSUPPORT	93	/* Protocol not supported */
+#define	ESOCKTNOSUPPORT	94	/* Socket type not supported */
+#define	EOPNOTSUPP	95	/* Operation not supported on transport endpoint */
+#define	EPFNOSUPPORT	96	/* Protocol family not supported */
+#define	EAFNOSUPPORT	97	/* Address family not supported by protocol */
+#define	EADDRINUSE	98	/* Address already in use */
+#define	EADDRNOTAVAIL	99	/* Cannot assign requested address */
+#define	ENETDOWN	100	/* Network is down */
+#define	ENETUNREACH	101	/* Network is unreachable */
+#define	ENETRESET	102	/* Network dropped connection because of reset */
+#define	ECONNABORTED	103	/* Software caused connection abort */
+#define	ECONNRESET	104	/* Connection reset by peer */
+#define	ENOBUFS		105	/* No buffer space available */
+#define	EISCONN		106	/* Transport endpoint is already connected */
+#define	ENOTCONN	107	/* Transport endpoint is not connected */
+#define	ESHUTDOWN	108	/* Cannot send after transport endpoint shutdown */
+#define	ETOOMANYREFS	109	/* Too many references: cannot splice */
+#define	ETIMEDOUT	110	/* Connection timed out */
+#define	ECONNREFUSED	111	/* Connection refused */
+#define	EHOSTDOWN	112	/* Host is down */
+#define	EHOSTUNREACH	113	/* No route to host */
+#define	EALREADY	114	/* Operation already in progress */
+#define	EINPROGRESS	115	/* Operation now in progress */
+#define	ESTALE		116	/* Stale NFS file handle */
+#define	EUCLEAN		117	/* Structure needs cleaning */
+#define	ENOTNAM		118	/* Not a XENIX named type file */
+#define	ENAVAIL		119	/* No XENIX semaphores available */
+#define	EISNAM		120	/* Is a named type file */
+#define	EREMOTEIO	121	/* Remote I/O error */
+#define	EDQUOT		122	/* Quota exceeded */
+
+#define	ENOMEDIUM	123	/* No medium found */
+#define	EMEDIUMTYPE	124	/* Wrong medium type */
+#define	ECANCELED	125	/* Operation Canceled */
+#define	ENOKEY		126	/* Required key not available */
+#define	EKEYEXPIRED	127	/* Key has expired */
+#define	EKEYREVOKED	128	/* Key has been revoked */
+#define	EKEYREJECTED	129	/* Key was rejected by service */
+
+/* for robust mutexes */
+#define	EOWNERDEAD	130	/* Owner died */
+#define	ENOTRECOVERABLE	131	/* State not recoverable */
+
+#define ERFKILL		132	/* Operation not possible due to RF-kill */
+
+#define EHWPOISON	133	/* Memory page has hardware error */
+
+
+#define NEED_REPLACEMENT 180 /* nand flash data block need replacement */
+
+#endif
diff --git a/include/asm-generic/exec.h b/include/asm-generic/exec.h
new file mode 100644
index 00000000..567766b0
--- /dev/null
+++ b/include/asm-generic/exec.h
@@ -0,0 +1,19 @@
+/* Generic process execution definitions, based on MN10300 definitions.
+ *
+ * It should be possible to use these on really simple architectures,
+ * but it serves more as a starting point for new ports.
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef __ASM_GENERIC_EXEC_H
+#define __ASM_GENERIC_EXEC_H
+
+#define arch_align_stack(x) (x)
+
+#endif /* __ASM_GENERIC_EXEC_H */
diff --git a/include/asm-generic/fb.h b/include/asm-generic/fb.h
new file mode 100644
index 00000000..fe8ca7fc
--- /dev/null
+++ b/include/asm-generic/fb.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_GENERIC_FB_H_
+#define __ASM_GENERIC_FB_H_
+#include <linux/fb.h>
+
+#define fb_pgprotect(...) do {} while (0)
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* __ASM_GENERIC_FB_H_ */
diff --git a/include/asm-generic/fcntl.h b/include/asm-generic/fcntl.h
new file mode 100644
index 00000000..9e5b0356
--- /dev/null
+++ b/include/asm-generic/fcntl.h
@@ -0,0 +1,195 @@
+#ifndef _ASM_GENERIC_FCNTL_H
+#define _ASM_GENERIC_FCNTL_H
+
+#include <linux/types.h>
+
+/*
+ * FMODE_EXEC is 0x20
+ * FMODE_NONOTIFY is 0x1000000
+ * These cannot be used by userspace O_* until internal and external open
+ * flags are split.
+ * -Eric Paris
+ */
+
+/*
+ * When introducing new O_* bits, please check its uniqueness in fcntl_init().
+ */
+
+#define O_ACCMODE	00000003
+#define O_RDONLY	00000000
+#define O_WRONLY	00000001
+#define O_RDWR		00000002
+#ifndef O_CREAT
+#define O_CREAT		00000100	/* not fcntl */
+#endif
+#ifndef O_EXCL
+#define O_EXCL		00000200	/* not fcntl */
+#endif
+#ifndef O_NOCTTY
+#define O_NOCTTY	00000400	/* not fcntl */
+#endif
+#ifndef O_TRUNC
+#define O_TRUNC		00001000	/* not fcntl */
+#endif
+#ifndef O_APPEND
+#define O_APPEND	00002000
+#endif
+#ifndef O_NONBLOCK
+#define O_NONBLOCK	00004000
+#endif
+#ifndef O_DSYNC
+#define O_DSYNC		00010000	/* used to be O_SYNC, see below */
+#endif
+#ifndef FASYNC
+#define FASYNC		00020000	/* fcntl, for BSD compatibility */
+#endif
+#ifndef O_DIRECT
+#define O_DIRECT	00040000	/* direct disk access hint */
+#endif
+#ifndef O_LARGEFILE
+#define O_LARGEFILE	00100000
+#endif
+#ifndef O_DIRECTORY
+#define O_DIRECTORY	00200000	/* must be a directory */
+#endif
+#ifndef O_NOFOLLOW
+#define O_NOFOLLOW	00400000	/* don't follow links */
+#endif
+#ifndef O_NOATIME
+#define O_NOATIME	01000000
+#endif
+#ifndef O_CLOEXEC
+#define O_CLOEXEC	02000000	/* set close_on_exec */
+#endif
+
+/*
+ * Before Linux 2.6.33 only O_DSYNC semantics were implemented, but using
+ * the O_SYNC flag.  We continue to use the existing numerical value
+ * for O_DSYNC semantics now, but using the correct symbolic name for it.
+ * This new value is used to request true Posix O_SYNC semantics.  It is
+ * defined in this strange way to make sure applications compiled against
+ * new headers get at least O_DSYNC semantics on older kernels.
+ *
+ * This has the nice side-effect that we can simply test for O_DSYNC
+ * wherever we do not care if O_DSYNC or O_SYNC is used.
+ *
+ * Note: __O_SYNC must never be used directly.
+ */
+#ifndef O_SYNC
+#define __O_SYNC	04000000
+#define O_SYNC		(__O_SYNC|O_DSYNC)
+#endif
+
+#ifndef O_PATH
+#define O_PATH		010000000
+#endif
+
+#ifndef O_NDELAY
+#define O_NDELAY	O_NONBLOCK
+#endif
+
+#define F_DUPFD		0	/* dup */
+#define F_GETFD		1	/* get close_on_exec */
+#define F_SETFD		2	/* set/clear close_on_exec */
+#define F_GETFL		3	/* get file->f_flags */
+#define F_SETFL		4	/* set file->f_flags */
+#ifndef F_GETLK
+#define F_GETLK		5
+#define F_SETLK		6
+#define F_SETLKW	7
+#endif
+#ifndef F_SETOWN
+#define F_SETOWN	8	/* for sockets. */
+#define F_GETOWN	9	/* for sockets. */
+#endif
+#ifndef F_SETSIG
+#define F_SETSIG	10	/* for sockets. */
+#define F_GETSIG	11	/* for sockets. */
+#endif
+
+#ifndef CONFIG_64BIT
+#ifndef F_GETLK64
+#define F_GETLK64	12	/*  using 'struct flock64' */
+#define F_SETLK64	13
+#define F_SETLKW64	14
+#endif
+#endif
+
+#ifndef F_SETOWN_EX
+#define F_SETOWN_EX	15
+#define F_GETOWN_EX	16
+#endif
+
+#define F_OWNER_TID	0
+#define F_OWNER_PID	1
+#define F_OWNER_PGRP	2
+
+struct f_owner_ex {
+	int	type;
+	__kernel_pid_t	pid;
+};
+
+/* for F_[GET|SET]FL */
+#define FD_CLOEXEC	1	/* actually anything with low bit set goes */
+
+/* for posix fcntl() and lockf() */
+#ifndef F_RDLCK
+#define F_RDLCK		0
+#define F_WRLCK		1
+#define F_UNLCK		2
+#endif
+
+/* for old implementation of bsd flock () */
+#ifndef F_EXLCK
+#define F_EXLCK		4	/* or 3 */
+#define F_SHLCK		8	/* or 4 */
+#endif
+
+/* operations for bsd flock(), also used by the kernel implementation */
+#define LOCK_SH		1	/* shared lock */
+#define LOCK_EX		2	/* exclusive lock */
+#define LOCK_NB		4	/* or'd with one of the above to prevent
+				   blocking */
+#define LOCK_UN		8	/* remove lock */
+
+#define LOCK_MAND	32	/* This is a mandatory flock ... */
+#define LOCK_READ	64	/* which allows concurrent read operations */
+#define LOCK_WRITE	128	/* which allows concurrent write operations */
+#define LOCK_RW		192	/* which allows concurrent read & write ops */
+
+#define F_LINUX_SPECIFIC_BASE	1024
+
+#ifndef HAVE_ARCH_STRUCT_FLOCK
+#ifndef __ARCH_FLOCK_PAD
+#define __ARCH_FLOCK_PAD
+#endif
+
+struct flock {
+	short	l_type;
+	short	l_whence;
+	__kernel_off_t	l_start;
+	__kernel_off_t	l_len;
+	__kernel_pid_t	l_pid;
+	__ARCH_FLOCK_PAD
+};
+#endif
+
+#ifndef CONFIG_64BIT
+
+#ifndef HAVE_ARCH_STRUCT_FLOCK64
+#ifndef __ARCH_FLOCK64_PAD
+#define __ARCH_FLOCK64_PAD
+#endif
+
+struct flock64 {
+	short  l_type;
+	short  l_whence;
+	__kernel_loff_t l_start;
+	__kernel_loff_t l_len;
+	__kernel_pid_t  l_pid;
+	__ARCH_FLOCK64_PAD
+};
+#endif
+#endif /* !CONFIG_64BIT */
+
+#endif /* _ASM_GENERIC_FCNTL_H */
diff --git a/include/asm-generic/ftrace.h b/include/asm-generic/ftrace.h
new file mode 100644
index 00000000..51abba9e
--- /dev/null
+++ b/include/asm-generic/ftrace.h
@@ -0,0 +1,16 @@
+/*
+ * linux/include/asm-generic/ftrace.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_GENERIC_FTRACE_H__
+#define __ASM_GENERIC_FTRACE_H__
+
+/*
+ * Not all architectures need their own ftrace.h, the most
+ * common definitions are already in linux/ftrace.h.
+ */
+
+#endif /* __ASM_GENERIC_FTRACE_H__ */
diff --git a/include/asm-generic/futex.h b/include/asm-generic/futex.h
new file mode 100644
index 00000000..01f227e1
--- /dev/null
+++ b/include/asm-generic/futex.h
@@ -0,0 +1,57 @@
+#ifndef _ASM_GENERIC_FUTEX_H
+#define _ASM_GENERIC_FUTEX_H
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+
+static inline int
+futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int oldval = 0, ret;
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	if (! access_ok (VERIFY_WRITE, uaddr, sizeof(u32)))
+		return -EFAULT;
+
+	pagefault_disable();
+
+	switch (op) {
+	case FUTEX_OP_SET:
+	case FUTEX_OP_ADD:
+	case FUTEX_OP_OR:
+	case FUTEX_OP_ANDN:
+	case FUTEX_OP_XOR:
+	default:
+		ret = -ENOSYS;
+	}
+
+	pagefault_enable();
+
+	if (!ret) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+		default: ret = -ENOSYS;
+		}
+	}
+	return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
+			      u32 oldval, u32 newval)
+{
+	return -ENOSYS;
+}
+
+#endif
diff --git a/include/asm-generic/getorder.h b/include/asm-generic/getorder.h
new file mode 100644
index 00000000..65e4468a
--- /dev/null
+++ b/include/asm-generic/getorder.h
@@ -0,0 +1,61 @@
+#ifndef __ASM_GENERIC_GETORDER_H
+#define __ASM_GENERIC_GETORDER_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/compiler.h>
+#include <linux/log2.h>
+
+/*
+ * Runtime evaluation of get_order()
+ */
+static inline __attribute_const__
+int __get_order(unsigned long size)
+{
+	int order;
+
+	size--;
+	size >>= PAGE_SHIFT;
+#if BITS_PER_LONG == 32
+	order = fls(size);
+#else
+	order = fls64(size);
+#endif
+	return order;
+}
+
+/**
+ * get_order - Determine the allocation order of a memory size
+ * @size: The size for which to get the order
+ *
+ * Determine the allocation order of a particular sized block of memory.  This
+ * is on a logarithmic scale, where:
+ *
+ *	0 -> 2^0 * PAGE_SIZE and below
+ *	1 -> 2^1 * PAGE_SIZE to 2^0 * PAGE_SIZE + 1
+ *	2 -> 2^2 * PAGE_SIZE to 2^1 * PAGE_SIZE + 1
+ *	3 -> 2^3 * PAGE_SIZE to 2^2 * PAGE_SIZE + 1
+ *	4 -> 2^4 * PAGE_SIZE to 2^3 * PAGE_SIZE + 1
+ *	...
+ *
+ * The order returned is used to find the smallest allocation granule required
+ * to hold an object of the specified size.
+ *
+ * The result is undefined if the size is 0.
+ *
+ * This function may be used to initialise variables with compile time
+ * evaluations of constants.
+ */
+#define get_order(n)						\
+(								\
+	__builtin_constant_p(n) ? (				\
+		((n) == 0UL) ? BITS_PER_LONG - PAGE_SHIFT :	\
+		(((n) < (1UL << PAGE_SHIFT)) ? 0 :		\
+		 ilog2((n) - 1) - PAGE_SHIFT + 1)		\
+	) :							\
+	__get_order(n)						\
+)
+
+#endif	/* __ASSEMBLY__ */
+
+#endif	/* __ASM_GENERIC_GETORDER_H */
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
new file mode 100644
index 00000000..70ed842f
--- /dev/null
+++ b/include/asm-generic/gpio.h
@@ -0,0 +1,257 @@
+#ifndef _ASM_GENERIC_GPIO_H
+#define _ASM_GENERIC_GPIO_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/of.h>
+
+#ifdef CONFIG_GPIOLIB
+
+#include <linux/compiler.h>
+
+/* Platforms may implement their GPIO interface with library code,
+ * at a small performance cost for non-inlined operations and some
+ * extra memory (for code and for per-GPIO table entries).
+ *
+ * While the GPIO programming interface defines valid GPIO numbers
+ * to be in the range 0..MAX_INT, this library restricts them to the
+ * smaller range 0..ARCH_NR_GPIOS-1.
+ *
+ * ARCH_NR_GPIOS is somewhat arbitrary; it usually reflects the sum of
+ * builtin/SoC GPIOs plus a number of GPIOs on expanders; the latter is
+ * actually an estimate of a board-specific value.
+ */
+
+#ifndef ARCH_NR_GPIOS
+#define ARCH_NR_GPIOS		256
+#endif
+
+/*
+ * "valid" GPIO numbers are nonnegative and may be passed to
+ * setup routines like gpio_request().  only some valid numbers
+ * can successfully be requested and used.
+ *
+ * Invalid GPIO numbers are useful for indicating no-such-GPIO in
+ * platform data and other tables.
+ */
+
+static inline bool gpio_is_valid(int number)
+{
+	return number >= 0 && number < ARCH_NR_GPIOS;
+}
+
+struct device;
+struct gpio;
+struct seq_file;
+struct module;
+struct device_node;
+
+/**
+ * struct gpio_chip - abstract a GPIO controller
+ * @label: for diagnostics
+ * @dev: optional device providing the GPIOs
+ * @owner: helps prevent removal of modules exporting active GPIOs
+ * @request: optional hook for chip-specific activation, such as
+ *	enabling module power and clock; may sleep
+ * @free: optional hook for chip-specific deactivation, such as
+ *	disabling module power and clock; may sleep
+ * @direction_input: configures signal "offset" as input, or returns error
+ * @get: returns value for signal "offset"; for output signals this
+ *	returns either the value actually sensed, or zero
+ * @direction_output: configures signal "offset" as output, or returns error
+ * @set: assigns output value for signal "offset"
+ * @to_irq: optional hook supporting non-static gpio_to_irq() mappings;
+ *	implementation may not sleep
+ * @dbg_show: optional routine to show contents in debugfs; default code
+ *	will be used when this is omitted, but custom code can show extra
+ *	state (such as pullup/pulldown configuration).
+ * @base: identifies the first GPIO number handled by this chip; or, if
+ *	negative during registration, requests dynamic ID allocation.
+ * @ngpio: the number of GPIOs handled by this controller; the last GPIO
+ *	handled is (base + ngpio - 1).
+ * @can_sleep: flag must be set iff get()/set() methods sleep, as they
+ *	must while accessing GPIO expander chips over I2C or SPI
+ * @names: if set, must be an array of strings to use as alternative
+ *      names for the GPIOs in this chip. Any entry in the array
+ *      may be NULL if there is no alias for the GPIO, however the
+ *      array must be @ngpio entries long.  A name can include a single printk
+ *      format specifier for an unsigned int.  It is substituted by the actual
+ *      number of the gpio.
+ *
+ * A gpio_chip can help platforms abstract various sources of GPIOs so
+ * they can all be accessed through a common programing interface.
+ * Example sources would be SOC controllers, FPGAs, multifunction
+ * chips, dedicated GPIO expanders, and so on.
+ *
+ * Each chip controls a number of signals, identified in method calls
+ * by "offset" values in the range 0..(@ngpio - 1).  When those signals
+ * are referenced through calls like gpio_get_value(gpio), the offset
+ * is calculated by subtracting @base from the gpio number.
+ */
+struct gpio_chip {
+	const char		*label;
+	struct device		*dev;
+	struct module		*owner;
+
+	int			(*request)(struct gpio_chip *chip,
+						unsigned offset);
+	void			(*free)(struct gpio_chip *chip,
+						unsigned offset);
+
+	int			(*direction_input)(struct gpio_chip *chip,
+						unsigned offset);
+	int			(*get)(struct gpio_chip *chip,
+						unsigned offset);
+	int			(*direction_output)(struct gpio_chip *chip,
+						unsigned offset, int value);
+	int			(*set_debounce)(struct gpio_chip *chip,
+						unsigned offset, unsigned debounce);
+
+	void			(*set)(struct gpio_chip *chip,
+						unsigned offset, int value);
+
+	int			(*to_irq)(struct gpio_chip *chip,
+						unsigned offset);
+
+	void			(*dbg_show)(struct seq_file *s,
+						struct gpio_chip *chip);
+	int			base;
+	u16			ngpio;
+	const char		*const *names;
+	unsigned		can_sleep:1;
+	unsigned		exported:1;
+
+#if defined(CONFIG_OF_GPIO)
+	/*
+	 * If CONFIG_OF is enabled, then all GPIO controllers described in the
+	 * device tree automatically may have an OF translation
+	 */
+	struct device_node *of_node;
+	int of_gpio_n_cells;
+	int (*of_xlate)(struct gpio_chip *gc,
+		        const struct of_phandle_args *gpiospec, u32 *flags);
+#endif
+};
+
+extern const char *gpiochip_is_requested(struct gpio_chip *chip,
+			unsigned offset);
+extern struct gpio_chip *gpio_to_chip(unsigned gpio);
+extern int __must_check gpiochip_reserve(int start, int ngpio);
+
+/* add/remove chips */
+extern int gpiochip_add(struct gpio_chip *chip);
+extern int __must_check gpiochip_remove(struct gpio_chip *chip);
+extern struct gpio_chip *gpiochip_find(const void *data,
+					int (*match)(struct gpio_chip *chip,
+						     const void *data));
+
+
+/* Always use the library code for GPIO management calls,
+ * or when sleeping may be involved.
+ */
+extern int gpio_request(unsigned gpio, const char *label);
+extern void gpio_free(unsigned gpio);
+extern int gpio_re_enabled(unsigned gpio);
+
+extern int gpio_direction_input(unsigned gpio);
+extern int gpio_direction_output(unsigned gpio, int value);
+
+extern int gpio_set_debounce(unsigned gpio, unsigned debounce);
+
+extern int gpio_get_value_cansleep(unsigned gpio);
+extern void gpio_set_value_cansleep(unsigned gpio, int value);
+
+
+/* A platform's <asm/gpio.h> code may want to inline the I/O calls when
+ * the GPIO is constant and refers to some always-present controller,
+ * giving direct access to chip registers and tight bitbanging loops.
+ */
+extern int __gpio_get_value(unsigned gpio);
+extern void __gpio_set_value(unsigned gpio, int value);
+
+extern int __gpio_cansleep(unsigned gpio);
+
+extern int __gpio_to_irq(unsigned gpio);
+
+extern int gpio_request_one(unsigned gpio, unsigned long flags, const char *label);
+extern int gpio_request_array(const struct gpio *array, size_t num);
+extern void gpio_free_array(const struct gpio *array, size_t num);
+
+/* bindings for managed devices that want to request gpios */
+int devm_gpio_request(struct device *dev, unsigned gpio, const char *label);
+void devm_gpio_free(struct device *dev, unsigned int gpio);
+
+#ifdef CONFIG_GPIO_SYSFS
+
+/*
+ * A sysfs interface can be exported by individual drivers if they want,
+ * but more typically is configured entirely from userspace.
+ */
+extern int gpio_export(unsigned gpio, bool direction_may_change);
+extern int gpio_export_link(struct device *dev, const char *name,
+			unsigned gpio);
+extern int gpio_sysfs_set_active_low(unsigned gpio, int value);
+extern void gpio_unexport(unsigned gpio);
+
+#endif	/* CONFIG_GPIO_SYSFS */
+
+#else	/* !CONFIG_GPIOLIB */
+
+static inline bool gpio_is_valid(int number)
+{
+	/* only non-negative numbers are valid */
+	return number >= 0;
+}
+
+/* platforms that don't directly support access to GPIOs through I2C, SPI,
+ * or other blocking infrastructure can use these wrappers.
+ */
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+	return 0;
+}
+
+static inline int gpio_get_value_cansleep(unsigned gpio)
+{
+	might_sleep();
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value_cansleep(unsigned gpio, int value)
+{
+	might_sleep();
+	__gpio_set_value(gpio, value);
+}
+
+#endif /* !CONFIG_GPIOLIB */
+
+#ifndef CONFIG_GPIO_SYSFS
+
+struct device;
+
+/* sysfs support is only available with gpiolib, where it's optional */
+
+static inline int gpio_export(unsigned gpio, bool direction_may_change)
+{
+	return -ENOSYS;
+}
+
+static inline int gpio_export_link(struct device *dev, const char *name,
+				unsigned gpio)
+{
+	return -ENOSYS;
+}
+
+static inline int gpio_sysfs_set_active_low(unsigned gpio, int value)
+{
+	return -ENOSYS;
+}
+
+static inline void gpio_unexport(unsigned gpio)
+{
+}
+#endif	/* CONFIG_GPIO_SYSFS */
+
+#endif /* _ASM_GENERIC_GPIO_H */
diff --git a/include/asm-generic/hardirq.h b/include/asm-generic/hardirq.h
new file mode 100644
index 00000000..04d0a977
--- /dev/null
+++ b/include/asm-generic/hardirq.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_GENERIC_HARDIRQ_H
+#define __ASM_GENERIC_HARDIRQ_H
+
+#include <linux/cache.h>
+#include <linux/threads.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+#include <linux/irq.h>
+
+#ifndef ack_bad_irq
+static inline void ack_bad_irq(unsigned int irq)
+{
+	printk(KERN_CRIT "unexpected IRQ trap at vector %02x\n", irq);
+}
+#endif
+
+#endif /* __ASM_GENERIC_HARDIRQ_H */
diff --git a/include/asm-generic/hw_irq.h b/include/asm-generic/hw_irq.h
new file mode 100644
index 00000000..89036d7b
--- /dev/null
+++ b/include/asm-generic/hw_irq.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_GENERIC_HW_IRQ_H
+#define __ASM_GENERIC_HW_IRQ_H
+/*
+ * hw_irq.h has internal declarations for the low-level interrupt
+ * controller, like the original i8259A.
+ * In general, this is not needed for new architectures.
+ */
+
+#endif /* __ASM_GENERIC_HW_IRQ_H */
diff --git a/include/asm-generic/ide_iops.h b/include/asm-generic/ide_iops.h
new file mode 100644
index 00000000..1b91d068
--- /dev/null
+++ b/include/asm-generic/ide_iops.h
@@ -0,0 +1,38 @@
+/* Generic I/O and MEMIO string operations.  */
+
+#define __ide_insw	insw
+#define __ide_insl	insl
+#define __ide_outsw	outsw
+#define __ide_outsl	outsl
+
+static __inline__ void __ide_mm_insw(void __iomem *port, void *addr, u32 count)
+{
+	while (count--) {
+		*(u16 *)addr = readw(port);
+		addr += 2;
+	}
+}
+
+static __inline__ void __ide_mm_insl(void __iomem *port, void *addr, u32 count)
+{
+	while (count--) {
+		*(u32 *)addr = readl(port);
+		addr += 4;
+	}
+}
+
+static __inline__ void __ide_mm_outsw(void __iomem *port, void *addr, u32 count)
+{
+	while (count--) {
+		writew(*(u16 *)addr, port);
+		addr += 2;
+	}
+}
+
+static __inline__ void __ide_mm_outsl(void __iomem * port, void *addr, u32 count)
+{
+	while (count--) {
+		writel(*(u32 *)addr, port);
+		addr += 4;
+	}
+}
diff --git a/include/asm-generic/int-l64.h b/include/asm-generic/int-l64.h
new file mode 100644
index 00000000..1ca3efc9
--- /dev/null
+++ b/include/asm-generic/int-l64.h
@@ -0,0 +1,73 @@
+/*
+ * asm-generic/int-l64.h
+ *
+ * Integer declarations for architectures which use "long"
+ * for 64-bit types.
+ */
+
+#ifndef _ASM_GENERIC_INT_L64_H
+#define _ASM_GENERIC_INT_L64_H
+
+#include <asm/bitsperlong.h>
+
+#ifndef __ASSEMBLY__
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+typedef __signed__ long __s64;
+typedef unsigned long __u64;
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long s64;
+typedef unsigned long u64;
+
+#define S8_C(x)  x
+#define U8_C(x)  x ## U
+#define S16_C(x) x
+#define U16_C(x) x ## U
+#define S32_C(x) x
+#define U32_C(x) x ## U
+#define S64_C(x) x ## L
+#define U64_C(x) x ## UL
+
+#else /* __ASSEMBLY__ */
+
+#define S8_C(x)  x
+#define U8_C(x)  x
+#define S16_C(x) x
+#define U16_C(x) x
+#define S32_C(x) x
+#define U32_C(x) x
+#define S64_C(x) x
+#define U64_C(x) x
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_GENERIC_INT_L64_H */
diff --git a/include/asm-generic/int-ll64.h b/include/asm-generic/int-ll64.h
new file mode 100644
index 00000000..f394147c
--- /dev/null
+++ b/include/asm-generic/int-ll64.h
@@ -0,0 +1,78 @@
+/*
+ * asm-generic/int-ll64.h
+ *
+ * Integer declarations for architectures which use "long long"
+ * for 64-bit types.
+ */
+
+#ifndef _ASM_GENERIC_INT_LL64_H
+#define _ASM_GENERIC_INT_LL64_H
+
+#include <asm/bitsperlong.h>
+
+#ifndef __ASSEMBLY__
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#ifdef __GNUC__
+__extension__ typedef __signed__ long long __s64;
+__extension__ typedef unsigned long long __u64;
+#else
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+#define S8_C(x)  x
+#define U8_C(x)  x ## U
+#define S16_C(x) x
+#define U16_C(x) x ## U
+#define S32_C(x) x
+#define U32_C(x) x ## U
+#define S64_C(x) x ## LL
+#define U64_C(x) x ## ULL
+
+#else /* __ASSEMBLY__ */
+
+#define S8_C(x)  x
+#define U8_C(x)  x
+#define S16_C(x) x
+#define U16_C(x) x
+#define S32_C(x) x
+#define U32_C(x) x
+#define S64_C(x) x
+#define U64_C(x) x
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_GENERIC_INT_LL64_H */
diff --git a/include/asm-generic/io-64-nonatomic-hi-lo.h b/include/asm-generic/io-64-nonatomic-hi-lo.h
new file mode 100644
index 00000000..a6806a94
--- /dev/null
+++ b/include/asm-generic/io-64-nonatomic-hi-lo.h
@@ -0,0 +1,28 @@
+#ifndef _ASM_IO_64_NONATOMIC_HI_LO_H_
+#define _ASM_IO_64_NONATOMIC_HI_LO_H_
+
+#include <linux/io.h>
+#include <asm-generic/int-ll64.h>
+
+#ifndef readq
+static inline __u64 readq(const volatile void __iomem *addr)
+{
+	const volatile u32 __iomem *p = addr;
+	u32 low, high;
+
+	high = readl(p + 1);
+	low = readl(p);
+
+	return low + ((u64)high << 32);
+}
+#endif
+
+#ifndef writeq
+static inline void writeq(__u64 val, volatile void __iomem *addr)
+{
+	writel(val >> 32, addr + 4);
+	writel(val, addr);
+}
+#endif
+
+#endif	/* _ASM_IO_64_NONATOMIC_HI_LO_H_ */
diff --git a/include/asm-generic/io-64-nonatomic-lo-hi.h b/include/asm-generic/io-64-nonatomic-lo-hi.h
new file mode 100644
index 00000000..ca546b1f
--- /dev/null
+++ b/include/asm-generic/io-64-nonatomic-lo-hi.h
@@ -0,0 +1,28 @@
+#ifndef _ASM_IO_64_NONATOMIC_LO_HI_H_
+#define _ASM_IO_64_NONATOMIC_LO_HI_H_
+
+#include <linux/io.h>
+#include <asm-generic/int-ll64.h>
+
+#ifndef readq
+static inline __u64 readq(const volatile void __iomem *addr)
+{
+	const volatile u32 __iomem *p = addr;
+	u32 low, high;
+
+	low = readl(p);
+	high = readl(p + 1);
+
+	return low + ((u64)high << 32);
+}
+#endif
+
+#ifndef writeq
+static inline void writeq(__u64 val, volatile void __iomem *addr)
+{
+	writel(val, addr);
+	writel(val >> 32, addr + 4);
+}
+#endif
+
+#endif	/* _ASM_IO_64_NONATOMIC_LO_HI_H_ */
diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h
new file mode 100644
index 00000000..448303bd
--- /dev/null
+++ b/include/asm-generic/io.h
@@ -0,0 +1,372 @@
+/* Generic I/O port emulation, based on MN10300 code
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef __ASM_GENERIC_IO_H
+#define __ASM_GENERIC_IO_H
+
+#include <asm/page.h> /* I/O is all done through memory accesses */
+#include <asm/cacheflush.h>
+#include <linux/types.h>
+
+#ifdef CONFIG_GENERIC_IOMAP
+#include <asm-generic/iomap.h>
+#endif
+
+#include <asm-generic/pci_iomap.h>
+
+#ifndef mmiowb
+#define mmiowb() do {} while (0)
+#endif
+
+/*****************************************************************************/
+/*
+ * readX/writeX() are used to access memory mapped devices. On some
+ * architectures the memory mapped IO stuff needs to be accessed
+ * differently. On the simple architectures, we just read/write the
+ * memory location directly.
+ */
+#ifndef __raw_readb
+static inline u8 __raw_readb(const volatile void __iomem *addr)
+{
+	return *(const volatile u8 __force *) addr;
+}
+#endif
+
+#ifndef __raw_readw
+static inline u16 __raw_readw(const volatile void __iomem *addr)
+{
+	return *(const volatile u16 __force *) addr;
+}
+#endif
+
+#ifndef __raw_readl
+static inline u32 __raw_readl(const volatile void __iomem *addr)
+{
+	return *(const volatile u32 __force *) addr;
+}
+#endif
+
+#define readb __raw_readb
+#define readw(addr) __le16_to_cpu(__raw_readw(addr))
+#define readl(addr) __le32_to_cpu(__raw_readl(addr))
+
+#ifndef __raw_writeb
+static inline void __raw_writeb(u8 b, volatile void __iomem *addr)
+{
+	*(volatile u8 __force *) addr = b;
+}
+#endif
+
+#ifndef __raw_writew
+static inline void __raw_writew(u16 b, volatile void __iomem *addr)
+{
+	*(volatile u16 __force *) addr = b;
+}
+#endif
+
+#ifndef __raw_writel
+static inline void __raw_writel(u32 b, volatile void __iomem *addr)
+{
+	*(volatile u32 __force *) addr = b;
+}
+#endif
+
+#define writeb __raw_writeb
+#define writew(b,addr) __raw_writew(__cpu_to_le16(b),addr)
+#define writel(b,addr) __raw_writel(__cpu_to_le32(b),addr)
+
+#ifdef CONFIG_64BIT
+static inline u64 __raw_readq(const volatile void __iomem *addr)
+{
+	return *(const volatile u64 __force *) addr;
+}
+#define readq(addr) __le64_to_cpu(__raw_readq(addr))
+
+static inline void __raw_writeq(u64 b, volatile void __iomem *addr)
+{
+	*(volatile u64 __force *) addr = b;
+}
+#define writeq(b,addr) __raw_writeq(__cpu_to_le64(b),addr)
+#endif
+
+#ifndef PCI_IOBASE
+#define PCI_IOBASE ((void __iomem *) 0)
+#endif
+
+/*****************************************************************************/
+/*
+ * traditional input/output functions
+ */
+
+static inline u8 inb(unsigned long addr)
+{
+	return readb(addr + PCI_IOBASE);
+}
+
+static inline u16 inw(unsigned long addr)
+{
+	return readw(addr + PCI_IOBASE);
+}
+
+static inline u32 inl(unsigned long addr)
+{
+	return readl(addr + PCI_IOBASE);
+}
+
+static inline void outb(u8 b, unsigned long addr)
+{
+	writeb(b, addr + PCI_IOBASE);
+}
+
+static inline void outw(u16 b, unsigned long addr)
+{
+	writew(b, addr + PCI_IOBASE);
+}
+
+static inline void outl(u32 b, unsigned long addr)
+{
+	writel(b, addr + PCI_IOBASE);
+}
+
+#define inb_p(addr)	inb(addr)
+#define inw_p(addr)	inw(addr)
+#define inl_p(addr)	inl(addr)
+#define outb_p(x, addr)	outb((x), (addr))
+#define outw_p(x, addr)	outw((x), (addr))
+#define outl_p(x, addr)	outl((x), (addr))
+
+#ifndef insb
+static inline void insb(unsigned long addr, void *buffer, int count)
+{
+	if (count) {
+		u8 *buf = buffer;
+		do {
+			u8 x = inb(addr);
+			*buf++ = x;
+		} while (--count);
+	}
+}
+#endif
+
+#ifndef insw
+static inline void insw(unsigned long addr, void *buffer, int count)
+{
+	if (count) {
+		u16 *buf = buffer;
+		do {
+			u16 x = inw(addr);
+			*buf++ = x;
+		} while (--count);
+	}
+}
+#endif
+
+#ifndef insl
+static inline void insl(unsigned long addr, void *buffer, int count)
+{
+	if (count) {
+		u32 *buf = buffer;
+		do {
+			u32 x = inl(addr);
+			*buf++ = x;
+		} while (--count);
+	}
+}
+#endif
+
+#ifndef outsb
+static inline void outsb(unsigned long addr, const void *buffer, int count)
+{
+	if (count) {
+		const u8 *buf = buffer;
+		do {
+			outb(*buf++, addr);
+		} while (--count);
+	}
+}
+#endif
+
+#ifndef outsw
+static inline void outsw(unsigned long addr, const void *buffer, int count)
+{
+	if (count) {
+		const u16 *buf = buffer;
+		do {
+			outw(*buf++, addr);
+		} while (--count);
+	}
+}
+#endif
+
+#ifndef outsl
+static inline void outsl(unsigned long addr, const void *buffer, int count)
+{
+	if (count) {
+		const u32 *buf = buffer;
+		do {
+			outl(*buf++, addr);
+		} while (--count);
+	}
+}
+#endif
+
+static inline void readsl(const void __iomem *addr, void *buf, int len)
+{
+	insl(addr - PCI_IOBASE, buf, len);
+}
+
+static inline void readsw(const void __iomem *addr, void *buf, int len)
+{
+	insw(addr - PCI_IOBASE, buf, len);
+}
+
+static inline void readsb(const void __iomem *addr, void *buf, int len)
+{
+	insb(addr - PCI_IOBASE, buf, len);
+}
+
+static inline void writesl(const void __iomem *addr, const void *buf, int len)
+{
+	outsl(addr - PCI_IOBASE, buf, len);
+}
+
+static inline void writesw(const void __iomem *addr, const void *buf, int len)
+{
+	outsw(addr - PCI_IOBASE, buf, len);
+}
+
+static inline void writesb(const void __iomem *addr, const void *buf, int len)
+{
+	outsb(addr - PCI_IOBASE, buf, len);
+}
+
+#ifndef CONFIG_GENERIC_IOMAP
+#define ioread8(addr)		readb(addr)
+#define ioread16(addr)		readw(addr)
+#define ioread16be(addr)	be16_to_cpu(ioread16(addr))
+#define ioread32(addr)		readl(addr)
+#define ioread32be(addr)	be32_to_cpu(ioread32(addr))
+
+#define iowrite8(v, addr)	writeb((v), (addr))
+#define iowrite16(v, addr)	writew((v), (addr))
+#define iowrite16be(v, addr)	iowrite16(be16_to_cpu(v), (addr))
+#define iowrite32(v, addr)	writel((v), (addr))
+#define iowrite32be(v, addr)	iowrite32(be32_to_cpu(v), (addr))
+
+#define ioread8_rep(p, dst, count) \
+	insb((unsigned long) (p), (dst), (count))
+#define ioread16_rep(p, dst, count) \
+	insw((unsigned long) (p), (dst), (count))
+#define ioread32_rep(p, dst, count) \
+	insl((unsigned long) (p), (dst), (count))
+
+#define iowrite8_rep(p, src, count) \
+	outsb((unsigned long) (p), (src), (count))
+#define iowrite16_rep(p, src, count) \
+	outsw((unsigned long) (p), (src), (count))
+#define iowrite32_rep(p, src, count) \
+	outsl((unsigned long) (p), (src), (count))
+#endif /* CONFIG_GENERIC_IOMAP */
+
+#ifndef IO_SPACE_LIMIT
+#define IO_SPACE_LIMIT 0xffff
+#endif
+
+#ifdef __KERNEL__
+
+#include <linux/vmalloc.h>
+#define __io_virt(x) ((void __force *) (x))
+
+#ifndef CONFIG_GENERIC_IOMAP
+struct pci_dev;
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p)
+{
+}
+#endif /* CONFIG_GENERIC_IOMAP */
+
+/*
+ * Change virtual addresses to physical addresses and vv.
+ * These are pretty trivial
+ */
+static inline unsigned long virt_to_phys(volatile void *address)
+{
+	return __pa((unsigned long)address);
+}
+
+static inline void *phys_to_virt(unsigned long address)
+{
+	return __va(address);
+}
+
+/*
+ * Change "struct page" to physical address.
+ *
+ * This implementation is for the no-MMU case only... if you have an MMU
+ * you'll need to provide your own definitions.
+ */
+#ifndef CONFIG_MMU
+static inline void __iomem *ioremap(phys_addr_t offset, unsigned long size)
+{
+	return (void __iomem*) (unsigned long)offset;
+}
+
+#define __ioremap(offset, size, flags)	ioremap(offset, size)
+
+#ifndef ioremap_nocache
+#define ioremap_nocache ioremap
+#endif
+
+#ifndef ioremap_wc
+#define ioremap_wc ioremap_nocache
+#endif
+
+static inline void iounmap(void __iomem *addr)
+{
+}
+#endif /* CONFIG_MMU */
+
+#ifdef CONFIG_HAS_IOPORT
+#ifndef CONFIG_GENERIC_IOMAP
+static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+	return (void __iomem *) port;
+}
+
+static inline void ioport_unmap(void __iomem *p)
+{
+}
+#else /* CONFIG_GENERIC_IOMAP */
+extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
+extern void ioport_unmap(void __iomem *p);
+#endif /* CONFIG_GENERIC_IOMAP */
+#endif /* CONFIG_HAS_IOPORT */
+
+#define xlate_dev_kmem_ptr(p)	p
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+#ifndef virt_to_bus
+static inline unsigned long virt_to_bus(volatile void *address)
+{
+	return ((unsigned long) address);
+}
+
+static inline void *bus_to_virt(unsigned long address)
+{
+	return (void *) address;
+}
+#endif
+
+#define memset_io(a, b, c)	memset(__io_virt(a), (b), (c))
+#define memcpy_fromio(a, b, c)	memcpy((a), __io_virt(b), (c))
+#define memcpy_toio(a, b, c)	memcpy(__io_virt(a), (b), (c))
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_GENERIC_IO_H */
diff --git a/include/asm-generic/ioctl.h b/include/asm-generic/ioctl.h
new file mode 100644
index 00000000..15828b2d
--- /dev/null
+++ b/include/asm-generic/ioctl.h
@@ -0,0 +1,105 @@
+#ifndef _ASM_GENERIC_IOCTL_H
+#define _ASM_GENERIC_IOCTL_H
+
+/* ioctl command encoding: 32 bits total, command in lower 16 bits,
+ * size of the parameter structure in the lower 14 bits of the
+ * upper 16 bits.
+ * Encoding the size of the parameter structure in the ioctl request
+ * is useful for catching programs compiled with old versions
+ * and to avoid overwriting user space outside the user buffer area.
+ * The highest 2 bits are reserved for indicating the ``access mode''.
+ * NOTE: This limits the max parameter size to 16kB -1 !
+ */
+
+/*
+ * The following is for compatibility across the various Linux
+ * platforms.  The generic ioctl numbering scheme doesn't really enforce
+ * a type field.  De facto, however, the top 8 bits of the lower 16
+ * bits are indeed used as a type field, so we might just as well make
+ * this explicit here.  Please be sure to use the decoding macros
+ * below from now on.
+ */
+#define _IOC_NRBITS	8
+#define _IOC_TYPEBITS	8
+
+/*
+ * Let any architecture override either of the following before
+ * including this file.
+ */
+
+#ifndef _IOC_SIZEBITS
+# define _IOC_SIZEBITS	14
+#endif
+
+#ifndef _IOC_DIRBITS
+# define _IOC_DIRBITS	2
+#endif
+
+#define _IOC_NRMASK	((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK	((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK	((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK	((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT	0
+#define _IOC_TYPESHIFT	(_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT	(_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT	(_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * Direction bits, which any architecture can choose to override
+ * before including this file.
+ */
+
+#ifndef _IOC_NONE
+# define _IOC_NONE	0U
+#endif
+
+#ifndef _IOC_WRITE
+# define _IOC_WRITE	1U
+#endif
+
+#ifndef _IOC_READ
+# define _IOC_READ	2U
+#endif
+
+#define _IOC(dir,type,nr,size) \
+	(((dir)  << _IOC_DIRSHIFT) | \
+	 ((type) << _IOC_TYPESHIFT) | \
+	 ((nr)   << _IOC_NRSHIFT) | \
+	 ((size) << _IOC_SIZESHIFT))
+
+#ifdef __KERNEL__
+/* provoke compile error for invalid uses of size argument */
+extern unsigned int __invalid_size_argument_for_IOC;
+#define _IOC_TYPECHECK(t) \
+	((sizeof(t) == sizeof(t[1]) && \
+	  sizeof(t) < (1 << _IOC_SIZEBITS)) ? \
+	  sizeof(t) : __invalid_size_argument_for_IOC)
+#else
+#define _IOC_TYPECHECK(t) (sizeof(t))
+#endif
+
+/* used to create numbers */
+#define _IO(type,nr)		_IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)	_IOC(_IOC_READ,(type),(nr),(_IOC_TYPECHECK(size)))
+#define _IOW(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size)))
+#define _IOWR(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size)))
+#define _IOR_BAD(type,nr,size)	_IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW_BAD(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR_BAD(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* used to decode ioctl numbers.. */
+#define _IOC_DIR(nr)		(((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr)		(((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)		(((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)		(((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* ...and for the drivers/sound files... */
+
+#define IOC_IN		(_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT		(_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT	((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK	(_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT	(_IOC_SIZESHIFT)
+
+#endif /* _ASM_GENERIC_IOCTL_H */
diff --git a/include/asm-generic/ioctls.h b/include/asm-generic/ioctls.h
new file mode 100644
index 00000000..199975fa
--- /dev/null
+++ b/include/asm-generic/ioctls.h
@@ -0,0 +1,114 @@
+#ifndef __ASM_GENERIC_IOCTLS_H
+#define __ASM_GENERIC_IOCTLS_H
+
+#include <linux/ioctl.h>
+
+/*
+ * These are the most common definitions for tty ioctl numbers.
+ * Most of them do not use the recommended _IOC(), but there is
+ * probably some source code out there hardcoding the number,
+ * so we might as well use them for all new platforms.
+ *
+ * The architectures that use different values here typically
+ * try to be compatible with some Unix variants for the same
+ * architecture.
+ */
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TCGETS2		_IOR('T', 0x2A, struct termios2)
+#define TCSETS2		_IOW('T', 0x2B, struct termios2)
+#define TCSETSW2	_IOW('T', 0x2C, struct termios2)
+#define TCSETSF2	_IOW('T', 0x2D, struct termios2)
+#define TIOCGRS485	0x542E
+#ifndef TIOCSRS485
+#define TIOCSRS485	0x542F
+#endif
+#define TIOCGPTN	_IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T', 0x31, int)  /* Lock/unlock Pty */
+#define TIOCGDEV	_IOR('T', 0x32, unsigned int) /* Get primary device node of /dev/console */
+#define TCGETX		0x5432 /* SYS5 TCGETX compatibility */
+#define TCSETX		0x5433
+#define TCSETXF		0x5434
+#define TCSETXW		0x5435
+#define TIOCSIG		_IOW('T', 0x36, int)  /* pty: generate signal */
+#define TIOCVHANGUP	0x5437
+
+#define FIONCLEX	0x5450
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+
+/*
+ * Some arches already define FIOQSIZE due to a historical
+ * conflict with a Hayes modem-specific ioctl value.
+ */
+#ifndef FIOQSIZE
+# define FIOQSIZE	0x5460
+#endif
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+#define TIOCPKT_IOCTL		64
+
+#define TIOCSER_TEMT	0x01	/* Transmitter physically empty */
+
+#endif /* __ASM_GENERIC_IOCTLS_H */
diff --git a/include/asm-generic/iomap.h b/include/asm-generic/iomap.h
new file mode 100644
index 00000000..6afd7d6a
--- /dev/null
+++ b/include/asm-generic/iomap.h
@@ -0,0 +1,81 @@
+#ifndef __GENERIC_IO_H
+#define __GENERIC_IO_H
+
+#include <linux/linkage.h>
+#include <asm/byteorder.h>
+
+/*
+ * These are the "generic" interfaces for doing new-style
+ * memory-mapped or PIO accesses. Architectures may do
+ * their own arch-optimized versions, these just act as
+ * wrappers around the old-style IO register access functions:
+ * read[bwl]/write[bwl]/in[bwl]/out[bwl]
+ *
+ * Don't include this directly, include it from <asm/io.h>.
+ */
+
+/*
+ * Read/write from/to an (offsettable) iomem cookie. It might be a PIO
+ * access or a MMIO access, these functions don't care. The info is
+ * encoded in the hardware mapping set up by the mapping functions
+ * (or the cookie itself, depending on implementation and hw).
+ *
+ * The generic routines just encode the PIO/MMIO as part of the
+ * cookie, and coldly assume that the MMIO IO mappings are not
+ * in the low address range. Architectures for which this is not
+ * true can't use this generic implementation.
+ */
+extern unsigned int ioread8(void __iomem *);
+extern unsigned int ioread16(void __iomem *);
+extern unsigned int ioread16be(void __iomem *);
+extern unsigned int ioread32(void __iomem *);
+extern unsigned int ioread32be(void __iomem *);
+
+extern void iowrite8(u8, void __iomem *);
+extern void iowrite16(u16, void __iomem *);
+extern void iowrite16be(u16, void __iomem *);
+extern void iowrite32(u32, void __iomem *);
+extern void iowrite32be(u32, void __iomem *);
+
+/*
+ * "string" versions of the above. Note that they
+ * use native byte ordering for the accesses (on
+ * the assumption that IO and memory agree on a
+ * byte order, and CPU byteorder is irrelevant).
+ *
+ * They do _not_ update the port address. If you
+ * want MMIO that copies stuff laid out in MMIO
+ * memory across multiple ports, use "memcpy_toio()"
+ * and friends.
+ */
+extern void ioread8_rep(void __iomem *port, void *buf, unsigned long count);
+extern void ioread16_rep(void __iomem *port, void *buf, unsigned long count);
+extern void ioread32_rep(void __iomem *port, void *buf, unsigned long count);
+
+extern void iowrite8_rep(void __iomem *port, const void *buf, unsigned long count);
+extern void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count);
+extern void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count);
+
+#ifdef CONFIG_HAS_IOPORT
+/* Create a virtual mapping cookie for an IO port range */
+extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
+extern void ioport_unmap(void __iomem *);
+#endif
+
+#ifndef ARCH_HAS_IOREMAP_WC
+#define ioremap_wc ioremap_nocache
+#endif
+
+#ifdef CONFIG_PCI
+/* Destroy a virtual mapping cookie for a PCI BAR (memory or IO) */
+struct pci_dev;
+extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
+#elif defined(CONFIG_GENERIC_IOMAP)
+struct pci_dev;
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
+{ }
+#endif
+
+#include <asm-generic/pci_iomap.h>
+
+#endif
diff --git a/include/asm-generic/ipcbuf.h b/include/asm-generic/ipcbuf.h
new file mode 100644
index 00000000..76982b2a
--- /dev/null
+++ b/include/asm-generic/ipcbuf.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_GENERIC_IPCBUF_H
+#define __ASM_GENERIC_IPCBUF_H
+
+/*
+ * The generic ipc64_perm structure:
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * ipc64_perm was originally meant to be architecture specific, but
+ * everyone just ended up making identical copies without specific
+ * optimizations, so we may just as well all use the same one.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t on architectures that only had 16 bit
+ * - 32-bit seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm {
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	__kernel_mode_t		mode;
+				/* pad if mode_t is u16: */
+	unsigned char		__pad1[4 - sizeof(__kernel_mode_t)];
+	unsigned short		seq;
+	unsigned short		__pad2;
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+#endif /* __ASM_GENERIC_IPCBUF_H */
diff --git a/include/asm-generic/irq.h b/include/asm-generic/irq.h
new file mode 100644
index 00000000..b90ec0bc
--- /dev/null
+++ b/include/asm-generic/irq.h
@@ -0,0 +1,18 @@
+#ifndef __ASM_GENERIC_IRQ_H
+#define __ASM_GENERIC_IRQ_H
+
+/*
+ * NR_IRQS is the upper bound of how many interrupts can be handled
+ * in the platform. It is used to size the static irq_map array,
+ * so don't make it too big.
+ */
+#ifndef NR_IRQS
+#define NR_IRQS 64
+#endif
+
+static inline int irq_canonicalize(int irq)
+{
+	return irq;
+}
+
+#endif /* __ASM_GENERIC_IRQ_H */
diff --git a/include/asm-generic/irq_regs.h b/include/asm-generic/irq_regs.h
new file mode 100644
index 00000000..6bf9355f
--- /dev/null
+++ b/include/asm-generic/irq_regs.h
@@ -0,0 +1,37 @@
+/* Fallback per-CPU frame pointer holder
+ *
+ * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_GENERIC_IRQ_REGS_H
+#define _ASM_GENERIC_IRQ_REGS_H
+
+#include <linux/percpu.h>
+
+/*
+ * Per-cpu current frame pointer - the location of the last exception frame on
+ * the stack
+ */
+DECLARE_PER_CPU(struct pt_regs *, __irq_regs);
+
+static inline struct pt_regs *get_irq_regs(void)
+{
+	return __this_cpu_read(__irq_regs);
+}
+
+static inline struct pt_regs *set_irq_regs(struct pt_regs *new_regs)
+{
+	struct pt_regs *old_regs;
+
+	old_regs = __this_cpu_read(__irq_regs);
+	__this_cpu_write(__irq_regs, new_regs);
+	return old_regs;
+}
+
+#endif /* _ASM_GENERIC_IRQ_REGS_H */
diff --git a/include/asm-generic/irqflags.h b/include/asm-generic/irqflags.h
new file mode 100644
index 00000000..1f40d002
--- /dev/null
+++ b/include/asm-generic/irqflags.h
@@ -0,0 +1,66 @@
+#ifndef __ASM_GENERIC_IRQFLAGS_H
+#define __ASM_GENERIC_IRQFLAGS_H
+
+/*
+ * All architectures should implement at least the first two functions,
+ * usually inline assembly will be the best way.
+ */
+#ifndef ARCH_IRQ_DISABLED
+#define ARCH_IRQ_DISABLED 0
+#define ARCH_IRQ_ENABLED 1
+#endif
+
+/* read interrupt enabled status */
+#ifndef arch_local_save_flags
+unsigned long arch_local_save_flags(void);
+#endif
+
+/* set interrupt enabled status */
+#ifndef arch_local_irq_restore
+void arch_local_irq_restore(unsigned long flags);
+#endif
+
+/* get status and disable interrupts */
+#ifndef arch_local_irq_save
+static inline unsigned long arch_local_irq_save(void)
+{
+	unsigned long flags;
+	flags = arch_local_save_flags();
+	arch_local_irq_restore(ARCH_IRQ_DISABLED);
+	return flags;
+}
+#endif
+
+/* test flags */
+#ifndef arch_irqs_disabled_flags
+static inline int arch_irqs_disabled_flags(unsigned long flags)
+{
+	return flags == ARCH_IRQ_DISABLED;
+}
+#endif
+
+/* unconditionally enable interrupts */
+#ifndef arch_local_irq_enable
+static inline void arch_local_irq_enable(void)
+{
+	arch_local_irq_restore(ARCH_IRQ_ENABLED);
+}
+#endif
+
+/* unconditionally disable interrupts */
+#ifndef arch_local_irq_disable
+static inline void arch_local_irq_disable(void)
+{
+	arch_local_irq_restore(ARCH_IRQ_DISABLED);
+}
+#endif
+
+/* test hardware interrupt enable bit */
+#ifndef arch_irqs_disabled
+static inline int arch_irqs_disabled(void)
+{
+	return arch_irqs_disabled_flags(arch_local_save_flags());
+}
+#endif
+
+#endif /* __ASM_GENERIC_IRQFLAGS_H */
diff --git a/include/asm-generic/kdebug.h b/include/asm-generic/kdebug.h
new file mode 100644
index 00000000..d1814497
--- /dev/null
+++ b/include/asm-generic/kdebug.h
@@ -0,0 +1,9 @@
+#ifndef _ASM_GENERIC_KDEBUG_H
+#define _ASM_GENERIC_KDEBUG_H
+
+enum die_val {
+	DIE_UNUSED,
+	DIE_OOPS = 1,
+};
+
+#endif /* _ASM_GENERIC_KDEBUG_H */
diff --git a/include/asm-generic/kmap_types.h b/include/asm-generic/kmap_types.h
new file mode 100644
index 00000000..0232ccb7
--- /dev/null
+++ b/include/asm-generic/kmap_types.h
@@ -0,0 +1,40 @@
+#ifndef _ASM_GENERIC_KMAP_TYPES_H
+#define _ASM_GENERIC_KMAP_TYPES_H
+
+#ifdef __WITH_KM_FENCE
+# define KMAP_D(n) __KM_FENCE_##n ,
+#else
+# define KMAP_D(n)
+#endif
+
+enum km_type {
+KMAP_D(0)	KM_BOUNCE_READ,
+KMAP_D(1)	KM_SKB_SUNRPC_DATA,
+KMAP_D(2)	KM_SKB_DATA_SOFTIRQ,
+KMAP_D(3)	KM_USER0,
+KMAP_D(4)	KM_USER1,
+KMAP_D(5)	KM_BIO_SRC_IRQ,
+KMAP_D(6)	KM_BIO_DST_IRQ,
+KMAP_D(7)	KM_PTE0,
+KMAP_D(8)	KM_PTE1,
+KMAP_D(9)	KM_IRQ0,
+KMAP_D(10)	KM_IRQ1,
+KMAP_D(11)	KM_SOFTIRQ0,
+KMAP_D(12)	KM_SOFTIRQ1,
+KMAP_D(13)	KM_SYNC_ICACHE,
+KMAP_D(14)	KM_SYNC_DCACHE,
+/* UML specific, for copy_*_user - used in do_op_one_page */
+KMAP_D(15)	KM_UML_USERCOPY,
+KMAP_D(16)	KM_IRQ_PTE,
+KMAP_D(17)	KM_NMI,
+KMAP_D(18)	KM_NMI_PTE,
+KMAP_D(19)	KM_KDB,
+/*
+ * Remember to update debug_kmap_atomic() when adding new kmap types!
+ */
+KMAP_D(20)	KM_TYPE_NR
+};
+
+#undef KMAP_D
+
+#endif
diff --git a/include/asm-generic/libata-portmap.h b/include/asm-generic/libata-portmap.h
new file mode 100644
index 00000000..cf14f2ff
--- /dev/null
+++ b/include/asm-generic/libata-portmap.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_GENERIC_LIBATA_PORTMAP_H
+#define __ASM_GENERIC_LIBATA_PORTMAP_H
+
+#define ATA_PRIMARY_IRQ(dev)	14
+#define ATA_SECONDARY_IRQ(dev)	15
+
+#endif
diff --git a/include/asm-generic/linkage.h b/include/asm-generic/linkage.h
new file mode 100644
index 00000000..fef7a01e
--- /dev/null
+++ b/include/asm-generic/linkage.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_GENERIC_LINKAGE_H
+#define __ASM_GENERIC_LINKAGE_H
+/*
+ * linux/linkage.h provides reasonable defaults.
+ * an architecture can override them by providing its own version.
+ */
+
+#endif /* __ASM_GENERIC_LINKAGE_H */
diff --git a/include/asm-generic/local.h b/include/asm-generic/local.h
new file mode 100644
index 00000000..9ceb03b4
--- /dev/null
+++ b/include/asm-generic/local.h
@@ -0,0 +1,55 @@
+#ifndef _ASM_GENERIC_LOCAL_H
+#define _ASM_GENERIC_LOCAL_H
+
+#include <linux/percpu.h>
+#include <linux/atomic.h>
+#include <asm/types.h>
+
+/*
+ * A signed long type for operations which are atomic for a single CPU.
+ * Usually used in combination with per-cpu variables.
+ *
+ * This is the default implementation, which uses atomic_long_t.  Which is
+ * rather pointless.  The whole point behind local_t is that some processors
+ * can perform atomic adds and subtracts in a manner which is atomic wrt IRQs
+ * running on this CPU.  local_t allows exploitation of such capabilities.
+ */
+
+/* Implement in terms of atomics. */
+
+/* Don't use typedef: don't want them to be mixed with atomic_t's. */
+typedef struct
+{
+	atomic_long_t a;
+} local_t;
+
+#define LOCAL_INIT(i)	{ ATOMIC_LONG_INIT(i) }
+
+#define local_read(l)	atomic_long_read(&(l)->a)
+#define local_set(l,i)	atomic_long_set((&(l)->a),(i))
+#define local_inc(l)	atomic_long_inc(&(l)->a)
+#define local_dec(l)	atomic_long_dec(&(l)->a)
+#define local_add(i,l)	atomic_long_add((i),(&(l)->a))
+#define local_sub(i,l)	atomic_long_sub((i),(&(l)->a))
+
+#define local_sub_and_test(i, l) atomic_long_sub_and_test((i), (&(l)->a))
+#define local_dec_and_test(l) atomic_long_dec_and_test(&(l)->a)
+#define local_inc_and_test(l) atomic_long_inc_and_test(&(l)->a)
+#define local_add_negative(i, l) atomic_long_add_negative((i), (&(l)->a))
+#define local_add_return(i, l) atomic_long_add_return((i), (&(l)->a))
+#define local_sub_return(i, l) atomic_long_sub_return((i), (&(l)->a))
+#define local_inc_return(l) atomic_long_inc_return(&(l)->a)
+
+#define local_cmpxchg(l, o, n) atomic_long_cmpxchg((&(l)->a), (o), (n))
+#define local_xchg(l, n) atomic_long_xchg((&(l)->a), (n))
+#define local_add_unless(l, _a, u) atomic_long_add_unless((&(l)->a), (_a), (u))
+#define local_inc_not_zero(l) atomic_long_inc_not_zero(&(l)->a)
+
+/* Non-atomic variants, ie. preemption disabled and won't be touched
+ * in interrupt, etc.  Some archs can optimize this case well. */
+#define __local_inc(l)		local_set((l), local_read(l) + 1)
+#define __local_dec(l)		local_set((l), local_read(l) - 1)
+#define __local_add(i,l)	local_set((l), local_read(l) + (i))
+#define __local_sub(i,l)	local_set((l), local_read(l) - (i))
+
+#endif /* _ASM_GENERIC_LOCAL_H */
diff --git a/include/asm-generic/local64.h b/include/asm-generic/local64.h
new file mode 100644
index 00000000..5980002b
--- /dev/null
+++ b/include/asm-generic/local64.h
@@ -0,0 +1,96 @@
+#ifndef _ASM_GENERIC_LOCAL64_H
+#define _ASM_GENERIC_LOCAL64_H
+
+#include <linux/percpu.h>
+#include <asm/types.h>
+
+/*
+ * A signed long type for operations which are atomic for a single CPU.
+ * Usually used in combination with per-cpu variables.
+ *
+ * This is the default implementation, which uses atomic64_t.  Which is
+ * rather pointless.  The whole point behind local64_t is that some processors
+ * can perform atomic adds and subtracts in a manner which is atomic wrt IRQs
+ * running on this CPU.  local64_t allows exploitation of such capabilities.
+ */
+
+/* Implement in terms of atomics. */
+
+#if BITS_PER_LONG == 64
+
+#include <asm/local.h>
+
+typedef struct {
+	local_t a;
+} local64_t;
+
+#define LOCAL64_INIT(i)	{ LOCAL_INIT(i) }
+
+#define local64_read(l)		local_read(&(l)->a)
+#define local64_set(l,i)	local_set((&(l)->a),(i))
+#define local64_inc(l)		local_inc(&(l)->a)
+#define local64_dec(l)		local_dec(&(l)->a)
+#define local64_add(i,l)	local_add((i),(&(l)->a))
+#define local64_sub(i,l)	local_sub((i),(&(l)->a))
+
+#define local64_sub_and_test(i, l) local_sub_and_test((i), (&(l)->a))
+#define local64_dec_and_test(l) local_dec_and_test(&(l)->a)
+#define local64_inc_and_test(l) local_inc_and_test(&(l)->a)
+#define local64_add_negative(i, l) local_add_negative((i), (&(l)->a))
+#define local64_add_return(i, l) local_add_return((i), (&(l)->a))
+#define local64_sub_return(i, l) local_sub_return((i), (&(l)->a))
+#define local64_inc_return(l)	local_inc_return(&(l)->a)
+
+#define local64_cmpxchg(l, o, n) local_cmpxchg((&(l)->a), (o), (n))
+#define local64_xchg(l, n)	local_xchg((&(l)->a), (n))
+#define local64_add_unless(l, _a, u) local_add_unless((&(l)->a), (_a), (u))
+#define local64_inc_not_zero(l)	local_inc_not_zero(&(l)->a)
+
+/* Non-atomic variants, ie. preemption disabled and won't be touched
+ * in interrupt, etc.  Some archs can optimize this case well. */
+#define __local64_inc(l)	local64_set((l), local64_read(l) + 1)
+#define __local64_dec(l)	local64_set((l), local64_read(l) - 1)
+#define __local64_add(i,l)	local64_set((l), local64_read(l) + (i))
+#define __local64_sub(i,l)	local64_set((l), local64_read(l) - (i))
+
+#else /* BITS_PER_LONG != 64 */
+
+#include <linux/atomic.h>
+
+/* Don't use typedef: don't want them to be mixed with atomic_t's. */
+typedef struct {
+	atomic64_t a;
+} local64_t;
+
+#define LOCAL64_INIT(i)	{ ATOMIC_LONG_INIT(i) }
+
+#define local64_read(l)		atomic64_read(&(l)->a)
+#define local64_set(l,i)	atomic64_set((&(l)->a),(i))
+#define local64_inc(l)		atomic64_inc(&(l)->a)
+#define local64_dec(l)		atomic64_dec(&(l)->a)
+#define local64_add(i,l)	atomic64_add((i),(&(l)->a))
+#define local64_sub(i,l)	atomic64_sub((i),(&(l)->a))
+
+#define local64_sub_and_test(i, l) atomic64_sub_and_test((i), (&(l)->a))
+#define local64_dec_and_test(l) atomic64_dec_and_test(&(l)->a)
+#define local64_inc_and_test(l) atomic64_inc_and_test(&(l)->a)
+#define local64_add_negative(i, l) atomic64_add_negative((i), (&(l)->a))
+#define local64_add_return(i, l) atomic64_add_return((i), (&(l)->a))
+#define local64_sub_return(i, l) atomic64_sub_return((i), (&(l)->a))
+#define local64_inc_return(l)	atomic64_inc_return(&(l)->a)
+
+#define local64_cmpxchg(l, o, n) atomic64_cmpxchg((&(l)->a), (o), (n))
+#define local64_xchg(l, n)	atomic64_xchg((&(l)->a), (n))
+#define local64_add_unless(l, _a, u) atomic64_add_unless((&(l)->a), (_a), (u))
+#define local64_inc_not_zero(l)	atomic64_inc_not_zero(&(l)->a)
+
+/* Non-atomic variants, ie. preemption disabled and won't be touched
+ * in interrupt, etc.  Some archs can optimize this case well. */
+#define __local64_inc(l)	local64_set((l), local64_read(l) + 1)
+#define __local64_dec(l)	local64_set((l), local64_read(l) - 1)
+#define __local64_add(i,l)	local64_set((l), local64_read(l) + (i))
+#define __local64_sub(i,l)	local64_set((l), local64_read(l) - (i))
+
+#endif /* BITS_PER_LONG != 64 */
+
+#endif /* _ASM_GENERIC_LOCAL64_H */
diff --git a/include/asm-generic/memory_model.h b/include/asm-generic/memory_model.h
new file mode 100644
index 00000000..aea9e45e
--- /dev/null
+++ b/include/asm-generic/memory_model.h
@@ -0,0 +1,77 @@
+#ifndef __ASM_MEMORY_MODEL_H
+#define __ASM_MEMORY_MODEL_H
+
+#ifndef __ASSEMBLY__
+
+#if defined(CONFIG_FLATMEM)
+
+#ifndef ARCH_PFN_OFFSET
+#define ARCH_PFN_OFFSET		(0UL)
+#endif
+
+#elif defined(CONFIG_DISCONTIGMEM)
+
+#ifndef arch_pfn_to_nid
+#define arch_pfn_to_nid(pfn)	pfn_to_nid(pfn)
+#endif
+
+#ifndef arch_local_page_offset
+#define arch_local_page_offset(pfn, nid)	\
+	((pfn) - NODE_DATA(nid)->node_start_pfn)
+#endif
+
+#endif /* CONFIG_DISCONTIGMEM */
+
+/*
+ * supports 3 memory models.
+ */
+#if defined(CONFIG_FLATMEM)
+
+#define __pfn_to_page(pfn)	(mem_map + ((pfn) - ARCH_PFN_OFFSET))
+#define __page_to_pfn(page)	((unsigned long)((page) - mem_map) + \
+				 ARCH_PFN_OFFSET)
+#elif defined(CONFIG_DISCONTIGMEM)
+
+#define __pfn_to_page(pfn)			\
+({	unsigned long __pfn = (pfn);		\
+	unsigned long __nid = arch_pfn_to_nid(__pfn);  \
+	NODE_DATA(__nid)->node_mem_map + arch_local_page_offset(__pfn, __nid);\
+})
+
+#define __page_to_pfn(pg)						\
+({	const struct page *__pg = (pg);					\
+	struct pglist_data *__pgdat = NODE_DATA(page_to_nid(__pg));	\
+	(unsigned long)(__pg - __pgdat->node_mem_map) +			\
+	 __pgdat->node_start_pfn;					\
+})
+
+#elif defined(CONFIG_SPARSEMEM_VMEMMAP)
+
+/* memmap is virtually contiguous.  */
+#define __pfn_to_page(pfn)	(vmemmap + (pfn))
+#define __page_to_pfn(page)	(unsigned long)((page) - vmemmap)
+
+#elif defined(CONFIG_SPARSEMEM)
+/*
+ * Note: section's mem_map is encorded to reflect its start_pfn.
+ * section[i].section_mem_map == mem_map's address - start_pfn;
+ */
+#define __page_to_pfn(pg)					\
+({	const struct page *__pg = (pg);				\
+	int __sec = page_to_section(__pg);			\
+	(unsigned long)(__pg - __section_mem_map_addr(__nr_to_section(__sec)));	\
+})
+
+#define __pfn_to_page(pfn)				\
+({	unsigned long __pfn = (pfn);			\
+	struct mem_section *__sec = __pfn_to_section(__pfn);	\
+	__section_mem_map_addr(__sec) + __pfn;		\
+})
+#endif /* CONFIG_FLATMEM/DISCONTIGMEM/SPARSEMEM */
+
+#define page_to_pfn __page_to_pfn
+#define pfn_to_page __pfn_to_page
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/include/asm-generic/mm_hooks.h b/include/asm-generic/mm_hooks.h
new file mode 100644
index 00000000..67dea812
--- /dev/null
+++ b/include/asm-generic/mm_hooks.h
@@ -0,0 +1,18 @@
+/*
+ * Define generic no-op hooks for arch_dup_mmap and arch_exit_mmap, to
+ * be included in asm-FOO/mmu_context.h for any arch FOO which doesn't
+ * need to hook these.
+ */
+#ifndef _ASM_GENERIC_MM_HOOKS_H
+#define _ASM_GENERIC_MM_HOOKS_H
+
+static inline void arch_dup_mmap(struct mm_struct *oldmm,
+				 struct mm_struct *mm)
+{
+}
+
+static inline void arch_exit_mmap(struct mm_struct *mm)
+{
+}
+
+#endif	/* _ASM_GENERIC_MM_HOOKS_H */
diff --git a/include/asm-generic/mman-common.h b/include/asm-generic/mman-common.h
new file mode 100644
index 00000000..d030d2c2
--- /dev/null
+++ b/include/asm-generic/mman-common.h
@@ -0,0 +1,58 @@
+#ifndef __ASM_GENERIC_MMAN_COMMON_H
+#define __ASM_GENERIC_MMAN_COMMON_H
+
+/*
+ Author: Michael S. Tsirkin <mst@mellanox.co.il>, Mellanox Technologies Ltd.
+ Based on: asm-xxx/mman.h
+*/
+
+#define PROT_READ	0x1		/* page can be read */
+#define PROT_WRITE	0x2		/* page can be written */
+#define PROT_EXEC	0x4		/* page can be executed */
+#define PROT_SEM	0x8		/* page may be used for atomic ops */
+#define PROT_NONE	0x0		/* page can not be accessed */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED	0x01		/* Share changes */
+#define MAP_PRIVATE	0x02		/* Changes are private */
+#define MAP_TYPE	0x0f		/* Mask for type of mapping */
+#define MAP_FIXED	0x10		/* Interpret addr exactly */
+#define MAP_ANONYMOUS	0x20		/* don't use a file */
+#ifdef CONFIG_MMAP_ALLOW_UNINITIALIZED
+# define MAP_UNINITIALIZED 0x4000000	/* For anonymous mmap, memory could be uninitialized */
+#else
+# define MAP_UNINITIALIZED 0x0		/* Don't support this flag */
+#endif
+
+#define MS_ASYNC	1		/* sync memory asynchronously */
+#define MS_INVALIDATE	2		/* invalidate the caches */
+#define MS_SYNC		4		/* synchronous memory sync */
+
+#define MADV_NORMAL	0		/* no further special treatment */
+#define MADV_RANDOM	1		/* expect random page references */
+#define MADV_SEQUENTIAL	2		/* expect sequential page references */
+#define MADV_WILLNEED	3		/* will need these pages */
+#define MADV_DONTNEED	4		/* don't need these pages */
+
+/* common parameters: try to keep these consistent across architectures */
+#define MADV_REMOVE	9		/* remove these pages & resources */
+#define MADV_DONTFORK	10		/* don't inherit across fork */
+#define MADV_DOFORK	11		/* do inherit across fork */
+#define MADV_HWPOISON	100		/* poison a page for testing */
+#define MADV_SOFT_OFFLINE 101		/* soft offline page for testing */
+
+#define MADV_MERGEABLE   12		/* KSM may merge identical pages */
+#define MADV_UNMERGEABLE 13		/* KSM may not merge identical pages */
+
+#define MADV_HUGEPAGE	14		/* Worth backing with hugepages */
+#define MADV_NOHUGEPAGE	15		/* Not worth backing with hugepages */
+
+#define MADV_DONTDUMP   16		/* Explicity exclude from the core dump,
+					   overrides the coredump filter bits */
+#define MADV_DODUMP	17		/* Clear the MADV_NODUMP flag */
+
+/* compatibility flags */
+#define MAP_FILE	0
+
+#endif /* __ASM_GENERIC_MMAN_COMMON_H */
diff --git a/include/asm-generic/mman.h b/include/asm-generic/mman.h
new file mode 100644
index 00000000..32c8bd6a
--- /dev/null
+++ b/include/asm-generic/mman.h
@@ -0,0 +1,19 @@
+#ifndef __ASM_GENERIC_MMAN_H
+#define __ASM_GENERIC_MMAN_H
+
+#include <asm-generic/mman-common.h>
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
+#define MAP_HUGETLB	0x40000		/* create a huge page mapping */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#endif /* __ASM_GENERIC_MMAN_H */
diff --git a/include/asm-generic/mmu.h b/include/asm-generic/mmu.h
new file mode 100644
index 00000000..4f4aa56d
--- /dev/null
+++ b/include/asm-generic/mmu.h
@@ -0,0 +1,15 @@
+#ifndef __ASM_GENERIC_MMU_H
+#define __ASM_GENERIC_MMU_H
+
+/*
+ * This is the mmu.h header for nommu implementations.
+ * Architectures with an MMU need something more complex.
+ */
+#ifndef __ASSEMBLY__
+typedef struct {
+	struct vm_list_struct	*vmlist;
+	unsigned long		end_brk;
+} mm_context_t;
+#endif
+
+#endif /* __ASM_GENERIC_MMU_H */
diff --git a/include/asm-generic/mmu_context.h b/include/asm-generic/mmu_context.h
new file mode 100644
index 00000000..a7eec910
--- /dev/null
+++ b/include/asm-generic/mmu_context.h
@@ -0,0 +1,45 @@
+#ifndef __ASM_GENERIC_MMU_CONTEXT_H
+#define __ASM_GENERIC_MMU_CONTEXT_H
+
+/*
+ * Generic hooks for NOMMU architectures, which do not need to do
+ * anything special here.
+ */
+
+#include <asm-generic/mm_hooks.h>
+
+struct task_struct;
+struct mm_struct;
+
+static inline void enter_lazy_tlb(struct mm_struct *mm,
+			struct task_struct *tsk)
+{
+}
+
+static inline int init_new_context(struct task_struct *tsk,
+			struct mm_struct *mm)
+{
+	return 0;
+}
+
+static inline void destroy_context(struct mm_struct *mm)
+{
+}
+
+static inline void deactivate_mm(struct task_struct *task,
+			struct mm_struct *mm)
+{
+}
+
+static inline void switch_mm(struct mm_struct *prev,
+			struct mm_struct *next,
+			struct task_struct *tsk)
+{
+}
+
+static inline void activate_mm(struct mm_struct *prev_mm,
+			       struct mm_struct *next_mm)
+{
+}
+
+#endif /* __ASM_GENERIC_MMU_CONTEXT_H */
diff --git a/include/asm-generic/module.h b/include/asm-generic/module.h
new file mode 100644
index 00000000..ed5b44de
--- /dev/null
+++ b/include/asm-generic/module.h
@@ -0,0 +1,22 @@
+#ifndef __ASM_GENERIC_MODULE_H
+#define __ASM_GENERIC_MODULE_H
+
+/*
+ * Many architectures just need a simple module
+ * loader without arch specific data.
+ */
+struct mod_arch_specific
+{
+};
+
+#ifdef CONFIG_64BIT
+#define Elf_Shdr Elf64_Shdr
+#define Elf_Sym Elf64_Sym
+#define Elf_Ehdr Elf64_Ehdr
+#else
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+#endif
+
+#endif /* __ASM_GENERIC_MODULE_H */
diff --git a/include/asm-generic/msgbuf.h b/include/asm-generic/msgbuf.h
new file mode 100644
index 00000000..aec850d9
--- /dev/null
+++ b/include/asm-generic/msgbuf.h
@@ -0,0 +1,47 @@
+#ifndef __ASM_GENERIC_MSGBUF_H
+#define __ASM_GENERIC_MSGBUF_H
+
+#include <asm/bitsperlong.h>
+/*
+ * generic msqid64_ds structure.
+ *
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * msqid64_ds was originally meant to be architecture specific, but
+ * everyone just ended up making identical copies without specific
+ * optimizations, so we may just as well all use the same one.
+ *
+ * 64 bit architectures typically define a 64 bit __kernel_time_t,
+ * so they do not need the first three padding words.
+ * On big-endian systems, the padding is in the wrong place.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+#if __BITS_PER_LONG != 64
+	unsigned long	__unused1;
+#endif
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+#if __BITS_PER_LONG != 64
+	unsigned long	__unused2;
+#endif
+	__kernel_time_t msg_ctime;	/* last change time */
+#if __BITS_PER_LONG != 64
+	unsigned long	__unused3;
+#endif
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* __ASM_GENERIC_MSGBUF_H */
diff --git a/include/asm-generic/mutex-dec.h b/include/asm-generic/mutex-dec.h
new file mode 100644
index 00000000..f104af7c
--- /dev/null
+++ b/include/asm-generic/mutex-dec.h
@@ -0,0 +1,90 @@
+/*
+ * include/asm-generic/mutex-dec.h
+ *
+ * Generic implementation of the mutex fastpath, based on atomic
+ * decrement/increment.
+ */
+#ifndef _ASM_GENERIC_MUTEX_DEC_H
+#define _ASM_GENERIC_MUTEX_DEC_H
+
+/**
+ *  __mutex_fastpath_lock - try to take the lock by moving the count
+ *                          from 1 to a 0 value
+ *  @count: pointer of type atomic_t
+ *  @fail_fn: function to call if the original value was not 1
+ *
+ * Change the count from 1 to a value lower than 1, and call <fail_fn> if
+ * it wasn't 1 originally. This function MUST leave the value lower than
+ * 1 even when the "1" assertion wasn't true.
+ */
+static inline void
+__mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *))
+{
+	if (unlikely(atomic_dec_return(count) < 0))
+		fail_fn(count);
+}
+
+/**
+ *  __mutex_fastpath_lock_retval - try to take the lock by moving the count
+ *                                 from 1 to a 0 value
+ *  @count: pointer of type atomic_t
+ *  @fail_fn: function to call if the original value was not 1
+ *
+ * Change the count from 1 to a value lower than 1, and call <fail_fn> if
+ * it wasn't 1 originally. This function returns 0 if the fastpath succeeds,
+ * or anything the slow path function returns.
+ */
+static inline int
+__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
+{
+	if (unlikely(atomic_dec_return(count) < 0))
+		return fail_fn(count);
+	return 0;
+}
+
+/**
+ *  __mutex_fastpath_unlock - try to promote the count from 0 to 1
+ *  @count: pointer of type atomic_t
+ *  @fail_fn: function to call if the original value was not 0
+ *
+ * Try to promote the count from 0 to 1. If it wasn't 0, call <fail_fn>.
+ * In the failure case, this function is allowed to either set the value to
+ * 1, or to set it to a value lower than 1.
+ *
+ * If the implementation sets it to a value of lower than 1, then the
+ * __mutex_slowpath_needs_to_unlock() macro needs to return 1, it needs
+ * to return 0 otherwise.
+ */
+static inline void
+__mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *))
+{
+	if (unlikely(atomic_inc_return(count) <= 0))
+		fail_fn(count);
+}
+
+#define __mutex_slowpath_needs_to_unlock()		1
+
+/**
+ * __mutex_fastpath_trylock - try to acquire the mutex, without waiting
+ *
+ *  @count: pointer of type atomic_t
+ *  @fail_fn: fallback function
+ *
+ * Change the count from 1 to a value lower than 1, and return 0 (failure)
+ * if it wasn't 1 originally, or return 1 (success) otherwise. This function
+ * MUST leave the value lower than 1 even when the "1" assertion wasn't true.
+ * Additionally, if the value was < 0 originally, this function must not leave
+ * it to 0 on failure.
+ *
+ * If the architecture has no effective trylock variant, it should call the
+ * <fail_fn> spinlock-based trylock variant unconditionally.
+ */
+static inline int
+__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *))
+{
+	if (likely(atomic_cmpxchg(count, 1, 0) == 1))
+		return 1;
+	return 0;
+}
+
+#endif
diff --git a/include/asm-generic/mutex-null.h b/include/asm-generic/mutex-null.h
new file mode 100644
index 00000000..e1bbbc72
--- /dev/null
+++ b/include/asm-generic/mutex-null.h
@@ -0,0 +1,19 @@
+/*
+ * include/asm-generic/mutex-null.h
+ *
+ * Generic implementation of the mutex fastpath, based on NOP :-)
+ *
+ * This is used by the mutex-debugging infrastructure, but it can also
+ * be used by architectures that (for whatever reason) want to use the
+ * spinlock based slowpath.
+ */
+#ifndef _ASM_GENERIC_MUTEX_NULL_H
+#define _ASM_GENERIC_MUTEX_NULL_H
+
+#define __mutex_fastpath_lock(count, fail_fn)		fail_fn(count)
+#define __mutex_fastpath_lock_retval(count, fail_fn)	fail_fn(count)
+#define __mutex_fastpath_unlock(count, fail_fn)		fail_fn(count)
+#define __mutex_fastpath_trylock(count, fail_fn)	fail_fn(count)
+#define __mutex_slowpath_needs_to_unlock()		1
+
+#endif
diff --git a/include/asm-generic/mutex-xchg.h b/include/asm-generic/mutex-xchg.h
new file mode 100644
index 00000000..c04e0db8
--- /dev/null
+++ b/include/asm-generic/mutex-xchg.h
@@ -0,0 +1,118 @@
+/*
+ * include/asm-generic/mutex-xchg.h
+ *
+ * Generic implementation of the mutex fastpath, based on xchg().
+ *
+ * NOTE: An xchg based implementation might be less optimal than an atomic
+ *       decrement/increment based implementation. If your architecture
+ *       has a reasonable atomic dec/inc then you should probably use
+ *	 asm-generic/mutex-dec.h instead, or you could open-code an
+ *	 optimized version in asm/mutex.h.
+ */
+#ifndef _ASM_GENERIC_MUTEX_XCHG_H
+#define _ASM_GENERIC_MUTEX_XCHG_H
+
+/**
+ *  __mutex_fastpath_lock - try to take the lock by moving the count
+ *                          from 1 to a 0 value
+ *  @count: pointer of type atomic_t
+ *  @fail_fn: function to call if the original value was not 1
+ *
+ * Change the count from 1 to a value lower than 1, and call <fail_fn> if it
+ * wasn't 1 originally. This function MUST leave the value lower than 1
+ * even when the "1" assertion wasn't true.
+ */
+static inline void
+__mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *))
+{
+	if (unlikely(atomic_xchg(count, 0) != 1))
+		/*
+		 * We failed to acquire the lock, so mark it contended
+		 * to ensure that any waiting tasks are woken up by the
+		 * unlock slow path.
+		 */
+		if (likely(atomic_xchg(count, -1) != 1))
+			fail_fn(count);
+}
+
+/**
+ *  __mutex_fastpath_lock_retval - try to take the lock by moving the count
+ *                                 from 1 to a 0 value
+ *  @count: pointer of type atomic_t
+ *  @fail_fn: function to call if the original value was not 1
+ *
+ * Change the count from 1 to a value lower than 1, and call <fail_fn> if it
+ * wasn't 1 originally. This function returns 0 if the fastpath succeeds,
+ * or anything the slow path function returns
+ */
+static inline int
+__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
+{
+	if (unlikely(atomic_xchg(count, 0) != 1))
+		if (likely(atomic_xchg(count, -1) != 1))
+			return fail_fn(count);
+	return 0;
+}
+
+/**
+ *  __mutex_fastpath_unlock - try to promote the mutex from 0 to 1
+ *  @count: pointer of type atomic_t
+ *  @fail_fn: function to call if the original value was not 0
+ *
+ * try to promote the mutex from 0 to 1. if it wasn't 0, call <function>
+ * In the failure case, this function is allowed to either set the value to
+ * 1, or to set it to a value lower than one.
+ * If the implementation sets it to a value of lower than one, the
+ * __mutex_slowpath_needs_to_unlock() macro needs to return 1, it needs
+ * to return 0 otherwise.
+ */
+static inline void
+__mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *))
+{
+	if (unlikely(atomic_xchg(count, 1) != 0))
+		fail_fn(count);
+}
+
+#define __mutex_slowpath_needs_to_unlock()		0
+
+/**
+ * __mutex_fastpath_trylock - try to acquire the mutex, without waiting
+ *
+ *  @count: pointer of type atomic_t
+ *  @fail_fn: spinlock based trylock implementation
+ *
+ * Change the count from 1 to a value lower than 1, and return 0 (failure)
+ * if it wasn't 1 originally, or return 1 (success) otherwise. This function
+ * MUST leave the value lower than 1 even when the "1" assertion wasn't true.
+ * Additionally, if the value was < 0 originally, this function must not leave
+ * it to 0 on failure.
+ *
+ * If the architecture has no effective trylock variant, it should call the
+ * <fail_fn> spinlock-based trylock variant unconditionally.
+ */
+static inline int
+__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *))
+{
+	int prev = atomic_xchg(count, 0);
+
+	if (unlikely(prev < 0)) {
+		/*
+		 * The lock was marked contended so we must restore that
+		 * state. If while doing so we get back a prev value of 1
+		 * then we just own it.
+		 *
+		 * [ In the rare case of the mutex going to 1, to 0, to -1
+		 *   and then back to 0 in this few-instructions window,
+		 *   this has the potential to trigger the slowpath for the
+		 *   owner's unlock path needlessly, but that's not a problem
+		 *   in practice. ]
+		 */
+		prev = atomic_xchg(count, prev);
+		if (prev < 0)
+			prev = 0;
+	}
+
+	return prev;
+}
+
+#endif
diff --git a/include/asm-generic/mutex.h b/include/asm-generic/mutex.h
new file mode 100644
index 00000000..fe91ab50
--- /dev/null
+++ b/include/asm-generic/mutex.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_GENERIC_MUTEX_H
+#define __ASM_GENERIC_MUTEX_H
+/*
+ * Pull in the generic implementation for the mutex fastpath,
+ * which is a reasonable default on many architectures.
+ */
+
+#include <asm-generic/mutex-dec.h>
+#endif /* __ASM_GENERIC_MUTEX_H */
diff --git a/include/asm-generic/page.h b/include/asm-generic/page.h
new file mode 100644
index 00000000..37d1fe28
--- /dev/null
+++ b/include/asm-generic/page.h
@@ -0,0 +1,103 @@
+#ifndef __ASM_GENERIC_PAGE_H
+#define __ASM_GENERIC_PAGE_H
+/*
+ * Generic page.h implementation, for NOMMU architectures.
+ * This provides the dummy definitions for the memory management.
+ */
+
+#ifdef CONFIG_MMU
+#error need to prove a real asm/page.h
+#endif
+
+
+/* PAGE_SHIFT determines the page size */
+
+#define PAGE_SHIFT	12
+#ifdef __ASSEMBLY__
+#define PAGE_SIZE	(1 << PAGE_SHIFT)
+#else
+#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#endif
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+#include <asm/setup.h>
+
+#ifndef __ASSEMBLY__
+
+#define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
+#define free_user_page(page, addr)	free_page(addr)
+
+#define clear_page(page)	memset((page), 0, PAGE_SIZE)
+#define copy_page(to,from)	memcpy((to), (from), PAGE_SIZE)
+
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct {
+	unsigned long pte;
+} pte_t;
+typedef struct {
+	unsigned long pmd[16];
+} pmd_t;
+typedef struct {
+	unsigned long pgd;
+} pgd_t;
+typedef struct {
+	unsigned long pgprot;
+} pgprot_t;
+typedef struct page *pgtable_t;
+
+#define pte_val(x)	((x).pte)
+#define pmd_val(x)	((&x)->pmd[0])
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __pmd(x)	((pmd_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+
+#endif /* !__ASSEMBLY__ */
+
+#ifdef CONFIG_KERNEL_RAM_BASE_ADDRESS
+#define PAGE_OFFSET		(CONFIG_KERNEL_RAM_BASE_ADDRESS)
+#else
+#define PAGE_OFFSET		(0)
+#endif
+
+#ifndef ARCH_PFN_OFFSET
+#define ARCH_PFN_OFFSET		(PAGE_OFFSET >> PAGE_SHIFT)
+#endif
+
+#ifndef __ASSEMBLY__
+
+#define __va(x) ((void *)((unsigned long) (x)))
+#define __pa(x) ((unsigned long) (x))
+
+#define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_to_virt(pfn)	__va((pfn) << PAGE_SHIFT)
+
+#define virt_to_page(addr)	pfn_to_page(virt_to_pfn(addr))
+#define page_to_virt(page)	pfn_to_virt(page_to_pfn(page))
+
+#ifndef page_to_phys
+#define page_to_phys(page)      ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
+#endif
+
+#define pfn_valid(pfn)		((pfn) >= ARCH_PFN_OFFSET && ((pfn) - ARCH_PFN_OFFSET) < max_mapnr)
+
+#define	virt_addr_valid(kaddr)	(((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
+				((void *)(kaddr) < (void *)memory_end))
+
+#endif /* __ASSEMBLY__ */
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/getorder.h>
+
+#endif /* __ASM_GENERIC_PAGE_H */
diff --git a/include/asm-generic/param.h b/include/asm-generic/param.h
new file mode 100644
index 00000000..835632a3
--- /dev/null
+++ b/include/asm-generic/param.h
@@ -0,0 +1,25 @@
+#ifndef __ASM_GENERIC_PARAM_H
+#define __ASM_GENERIC_PARAM_H
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#ifndef EXEC_PAGESIZE
+#define EXEC_PAGESIZE	4096
+#endif
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#ifdef __KERNEL__
+# undef HZ
+# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
+# define USER_HZ	100		/* some user interfaces are */
+# define CLOCKS_PER_SEC	(USER_HZ)       /* in "ticks" like times() */
+#endif
+
+#endif /* __ASM_GENERIC_PARAM_H */
diff --git a/include/asm-generic/parport.h b/include/asm-generic/parport.h
new file mode 100644
index 00000000..40528cb9
--- /dev/null
+++ b/include/asm-generic/parport.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_GENERIC_PARPORT_H
+#define __ASM_GENERIC_PARPORT_H
+
+/*
+ * An ISA bus may have i8255 parallel ports at well-known
+ * locations in the I/O space, which are scanned by
+ * parport_pc_find_isa_ports.
+ *
+ * Without ISA support, the driver will only attach
+ * to devices on the PCI bus.
+ */
+
+static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma);
+static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma)
+{
+#ifdef CONFIG_ISA
+	return parport_pc_find_isa_ports(autoirq, autodma);
+#else
+	return 0;
+#endif
+}
+
+#endif /* __ASM_GENERIC_PARPORT_H */
diff --git a/include/asm-generic/pci-bridge.h b/include/asm-generic/pci-bridge.h
new file mode 100644
index 00000000..a5b5d5a8
--- /dev/null
+++ b/include/asm-generic/pci-bridge.h
@@ -0,0 +1,68 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_GENERIC_PCI_BRIDGE_H
+#define _ASM_GENERIC_PCI_BRIDGE_H
+
+#ifdef __KERNEL__
+
+enum {
+	/* Force re-assigning all resources (ignore firmware
+	 * setup completely)
+	 */
+	PCI_REASSIGN_ALL_RSRC	= 0x00000001,
+
+	/* Re-assign all bus numbers */
+	PCI_REASSIGN_ALL_BUS	= 0x00000002,
+
+	/* Do not try to assign, just use existing setup */
+	PCI_PROBE_ONLY		= 0x00000004,
+
+	/* Don't bother with ISA alignment unless the bridge has
+	 * ISA forwarding enabled
+	 */
+	PCI_CAN_SKIP_ISA_ALIGN	= 0x00000008,
+
+	/* Enable domain numbers in /proc */
+	PCI_ENABLE_PROC_DOMAINS	= 0x00000010,
+	/* ... except for domain 0 */
+	PCI_COMPAT_DOMAIN_0	= 0x00000020,
+};
+
+#ifdef CONFIG_PCI
+extern unsigned int pci_flags;
+
+static inline void pci_set_flags(int flags)
+{
+	pci_flags = flags;
+}
+
+static inline void pci_add_flags(int flags)
+{
+	pci_flags |= flags;
+}
+
+static inline void pci_clear_flags(int flags)
+{
+	pci_flags &= ~flags;
+}
+
+static inline int pci_has_flag(int flag)
+{
+	return pci_flags & flag;
+}
+#else
+static inline void pci_set_flags(int flags) { }
+static inline void pci_add_flags(int flags) { }
+static inline void pci_clear_flags(int flags) { }
+static inline int pci_has_flag(int flag)
+{
+	return 0;
+}
+#endif	/* CONFIG_PCI */
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_GENERIC_PCI_BRIDGE_H */
diff --git a/include/asm-generic/pci-dma-compat.h b/include/asm-generic/pci-dma-compat.h
new file mode 100644
index 00000000..1437b7da
--- /dev/null
+++ b/include/asm-generic/pci-dma-compat.h
@@ -0,0 +1,116 @@
+/* include this file if the platform implements the dma_ DMA Mapping API
+ * and wants to provide the pci_ DMA Mapping API in terms of it */
+
+#ifndef _ASM_GENERIC_PCI_DMA_COMPAT_H
+#define _ASM_GENERIC_PCI_DMA_COMPAT_H
+
+#include <linux/dma-mapping.h>
+
+static inline int
+pci_dma_supported(struct pci_dev *hwdev, u64 mask)
+{
+	return dma_supported(hwdev == NULL ? NULL : &hwdev->dev, mask);
+}
+
+static inline void *
+pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
+		     dma_addr_t *dma_handle)
+{
+	return dma_alloc_coherent(hwdev == NULL ? NULL : &hwdev->dev, size, dma_handle, GFP_ATOMIC);
+}
+
+static inline void
+pci_free_consistent(struct pci_dev *hwdev, size_t size,
+		    void *vaddr, dma_addr_t dma_handle)
+{
+	dma_free_coherent(hwdev == NULL ? NULL : &hwdev->dev, size, vaddr, dma_handle);
+}
+
+static inline dma_addr_t
+pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction)
+{
+	return dma_map_single(hwdev == NULL ? NULL : &hwdev->dev, ptr, size, (enum dma_data_direction)direction);
+}
+
+static inline void
+pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr,
+		 size_t size, int direction)
+{
+	dma_unmap_single(hwdev == NULL ? NULL : &hwdev->dev, dma_addr, size, (enum dma_data_direction)direction);
+}
+
+static inline dma_addr_t
+pci_map_page(struct pci_dev *hwdev, struct page *page,
+	     unsigned long offset, size_t size, int direction)
+{
+	return dma_map_page(hwdev == NULL ? NULL : &hwdev->dev, page, offset, size, (enum dma_data_direction)direction);
+}
+
+static inline void
+pci_unmap_page(struct pci_dev *hwdev, dma_addr_t dma_address,
+	       size_t size, int direction)
+{
+	dma_unmap_page(hwdev == NULL ? NULL : &hwdev->dev, dma_address, size, (enum dma_data_direction)direction);
+}
+
+static inline int
+pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
+	   int nents, int direction)
+{
+	return dma_map_sg(hwdev == NULL ? NULL : &hwdev->dev, sg, nents, (enum dma_data_direction)direction);
+}
+
+static inline void
+pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg,
+	     int nents, int direction)
+{
+	dma_unmap_sg(hwdev == NULL ? NULL : &hwdev->dev, sg, nents, (enum dma_data_direction)direction);
+}
+
+static inline void
+pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t dma_handle,
+		    size_t size, int direction)
+{
+	dma_sync_single_for_cpu(hwdev == NULL ? NULL : &hwdev->dev, dma_handle, size, (enum dma_data_direction)direction);
+}
+
+static inline void
+pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t dma_handle,
+		    size_t size, int direction)
+{
+	dma_sync_single_for_device(hwdev == NULL ? NULL : &hwdev->dev, dma_handle, size, (enum dma_data_direction)direction);
+}
+
+static inline void
+pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sg,
+		int nelems, int direction)
+{
+	dma_sync_sg_for_cpu(hwdev == NULL ? NULL : &hwdev->dev, sg, nelems, (enum dma_data_direction)direction);
+}
+
+static inline void
+pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg,
+		int nelems, int direction)
+{
+	dma_sync_sg_for_device(hwdev == NULL ? NULL : &hwdev->dev, sg, nelems, (enum dma_data_direction)direction);
+}
+
+static inline int
+pci_dma_mapping_error(struct pci_dev *pdev, dma_addr_t dma_addr)
+{
+	return dma_mapping_error(&pdev->dev, dma_addr);
+}
+
+#ifdef CONFIG_PCI
+static inline int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
+{
+	return dma_set_mask(&dev->dev, mask);
+}
+
+static inline int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
+{
+	return dma_set_coherent_mask(&dev->dev, mask);
+}
+#endif
+
+#endif
diff --git a/include/asm-generic/pci.h b/include/asm-generic/pci.h
new file mode 100644
index 00000000..e80a0495
--- /dev/null
+++ b/include/asm-generic/pci.h
@@ -0,0 +1,37 @@
+/*
+ * linux/include/asm-generic/pci.h
+ *
+ *  Copyright (C) 2003 Russell King
+ */
+#ifndef _ASM_GENERIC_PCI_H
+#define _ASM_GENERIC_PCI_H
+
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+	struct resource *root = NULL;
+
+	if (res->flags & IORESOURCE_IO)
+		root = &ioport_resource;
+	if (res->flags & IORESOURCE_MEM)
+		root = &iomem_resource;
+
+	return root;
+}
+
+#ifndef HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+	return channel ? 15 : 14;
+}
+#endif /* HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ */
+
+/*
+ * By default, assume that no iommu is in use and that the PCI
+ * space is mapped to address physical 0.
+ */
+#ifndef PCI_DMA_BUS_IS_PHYS
+#define PCI_DMA_BUS_IS_PHYS	(1)
+#endif
+
+#endif /* _ASM_GENERIC_PCI_H */
diff --git a/include/asm-generic/pci_iomap.h b/include/asm-generic/pci_iomap.h
new file mode 100644
index 00000000..ce373498
--- /dev/null
+++ b/include/asm-generic/pci_iomap.h
@@ -0,0 +1,35 @@
+/* Generic I/O port emulation, based on MN10300 code
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef __ASM_GENERIC_PCI_IOMAP_H
+#define __ASM_GENERIC_PCI_IOMAP_H
+
+struct pci_dev;
+#ifdef CONFIG_PCI
+/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+/* Create a virtual mapping cookie for a port on a given PCI device.
+ * Do not call this directly, it exists to make it easier for architectures
+ * to override */
+#ifdef CONFIG_NO_GENERIC_PCI_IOPORT_MAP
+extern void __iomem *__pci_ioport_map(struct pci_dev *dev, unsigned long port,
+				      unsigned int nr);
+#else
+#define __pci_ioport_map(dev, port, nr) ioport_map((port), (nr))
+#endif
+
+#elif defined(CONFIG_GENERIC_PCI_IOMAP)
+static inline void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
+{
+	return NULL;
+}
+#endif
+
+#endif /* __ASM_GENERIC_IO_H */
diff --git a/include/asm-generic/percpu.h b/include/asm-generic/percpu.h
new file mode 100644
index 00000000..d17784ea
--- /dev/null
+++ b/include/asm-generic/percpu.h
@@ -0,0 +1,125 @@
+#ifndef _ASM_GENERIC_PERCPU_H_
+#define _ASM_GENERIC_PERCPU_H_
+
+#include <linux/compiler.h>
+#include <linux/threads.h>
+#include <linux/percpu-defs.h>
+
+#ifdef CONFIG_SMP
+
+/*
+ * per_cpu_offset() is the offset that has to be added to a
+ * percpu variable to get to the instance for a certain processor.
+ *
+ * Most arches use the __per_cpu_offset array for those offsets but
+ * some arches have their own ways of determining the offset (x86_64, s390).
+ */
+#ifndef __per_cpu_offset
+extern unsigned long __per_cpu_offset[NR_CPUS];
+
+#define per_cpu_offset(x) (__per_cpu_offset[x])
+#endif
+
+/*
+ * Determine the offset for the currently active processor.
+ * An arch may define __my_cpu_offset to provide a more effective
+ * means of obtaining the offset to the per cpu variables of the
+ * current processor.
+ */
+#ifndef __my_cpu_offset
+#define __my_cpu_offset per_cpu_offset(raw_smp_processor_id())
+#endif
+#ifdef CONFIG_DEBUG_PREEMPT
+#define my_cpu_offset per_cpu_offset(smp_processor_id())
+#else
+#define my_cpu_offset __my_cpu_offset
+#endif
+
+/*
+ * Add a offset to a pointer but keep the pointer as is.
+ *
+ * Only S390 provides its own means of moving the pointer.
+ */
+#ifndef SHIFT_PERCPU_PTR
+/* Weird cast keeps both GCC and sparse happy. */
+#define SHIFT_PERCPU_PTR(__p, __offset)	({				\
+	__verify_pcpu_ptr((__p));					\
+	RELOC_HIDE((typeof(*(__p)) __kernel __force *)(__p), (__offset)); \
+})
+#endif
+
+/*
+ * A percpu variable may point to a discarded regions. The following are
+ * established ways to produce a usable pointer from the percpu variable
+ * offset.
+ */
+#define per_cpu(var, cpu) \
+	(*SHIFT_PERCPU_PTR(&(var), per_cpu_offset(cpu)))
+
+#ifndef __this_cpu_ptr
+#define __this_cpu_ptr(ptr) SHIFT_PERCPU_PTR(ptr, __my_cpu_offset)
+#endif
+#ifdef CONFIG_DEBUG_PREEMPT
+#define this_cpu_ptr(ptr) SHIFT_PERCPU_PTR(ptr, my_cpu_offset)
+#else
+#define this_cpu_ptr(ptr) __this_cpu_ptr(ptr)
+#endif
+
+#define __get_cpu_var(var) (*this_cpu_ptr(&(var)))
+#define __raw_get_cpu_var(var) (*__this_cpu_ptr(&(var)))
+
+#ifdef CONFIG_HAVE_SETUP_PER_CPU_AREA
+extern void setup_per_cpu_areas(void);
+#endif
+
+#else /* ! SMP */
+
+#define VERIFY_PERCPU_PTR(__p) ({			\
+	__verify_pcpu_ptr((__p));			\
+	(typeof(*(__p)) __kernel __force *)(__p);	\
+})
+
+#define per_cpu(var, cpu)	(*((void)(cpu), VERIFY_PERCPU_PTR(&(var))))
+#define __get_cpu_var(var)	(*VERIFY_PERCPU_PTR(&(var)))
+#define __raw_get_cpu_var(var)	(*VERIFY_PERCPU_PTR(&(var)))
+#define this_cpu_ptr(ptr)	per_cpu_ptr(ptr, 0)
+#define __this_cpu_ptr(ptr)	this_cpu_ptr(ptr)
+
+#endif	/* SMP */
+
+#ifndef PER_CPU_BASE_SECTION
+#ifdef CONFIG_SMP
+#define PER_CPU_BASE_SECTION ".data..percpu"
+#else
+#define PER_CPU_BASE_SECTION ".data"
+#endif
+#endif
+
+#ifdef CONFIG_SMP
+
+#ifdef MODULE
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#define PER_CPU_ALIGNED_SECTION ""
+#else
+#define PER_CPU_SHARED_ALIGNED_SECTION "..shared_aligned"
+#define PER_CPU_ALIGNED_SECTION "..shared_aligned"
+#endif
+#define PER_CPU_FIRST_SECTION "..first"
+
+#else
+
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#define PER_CPU_ALIGNED_SECTION "..shared_aligned"
+#define PER_CPU_FIRST_SECTION ""
+
+#endif
+
+#ifndef PER_CPU_ATTRIBUTES
+#define PER_CPU_ATTRIBUTES
+#endif
+
+#ifndef PER_CPU_DEF_ATTRIBUTES
+#define PER_CPU_DEF_ATTRIBUTES
+#endif
+
+#endif /* _ASM_GENERIC_PERCPU_H_ */
diff --git a/include/asm-generic/pgalloc.h b/include/asm-generic/pgalloc.h
new file mode 100644
index 00000000..9e429d08
--- /dev/null
+++ b/include/asm-generic/pgalloc.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_GENERIC_PGALLOC_H
+#define __ASM_GENERIC_PGALLOC_H
+/*
+ * an empty file is enough for a nommu architecture
+ */
+#ifdef CONFIG_MMU
+#error need to implement an architecture specific asm/pgalloc.h
+#endif
+
+#define check_pgt_cache()          do { } while (0)
+
+#endif /* __ASM_GENERIC_PGALLOC_H */
diff --git a/include/asm-generic/pgtable-nopmd.h b/include/asm-generic/pgtable-nopmd.h
new file mode 100644
index 00000000..725612b7
--- /dev/null
+++ b/include/asm-generic/pgtable-nopmd.h
@@ -0,0 +1,69 @@
+#ifndef _PGTABLE_NOPMD_H
+#define _PGTABLE_NOPMD_H
+
+#ifndef __ASSEMBLY__
+
+#include <asm-generic/pgtable-nopud.h>
+
+struct mm_struct;
+
+#define __PAGETABLE_PMD_FOLDED
+
+/*
+ * Having the pmd type consist of a pud gets the size right, and allows
+ * us to conceptually access the pud entry that this pmd is folded into
+ * without casting.
+ */
+typedef struct { pud_t pud; } pmd_t;
+
+#define PMD_SHIFT	PUD_SHIFT
+#define PTRS_PER_PMD	1
+#define PMD_SIZE  	(1UL << PMD_SHIFT)
+#define PMD_MASK  	(~(PMD_SIZE-1))
+
+/*
+ * The "pud_xxx()" functions here are trivial for a folded two-level
+ * setup: the pmd is never bad, and a pmd always exists (as it's folded
+ * into the pud entry)
+ */
+static inline int pud_none(pud_t pud)		{ return 0; }
+static inline int pud_bad(pud_t pud)		{ return 0; }
+static inline int pud_present(pud_t pud)	{ return 1; }
+static inline void pud_clear(pud_t *pud)	{ }
+#define pmd_ERROR(pmd)				(pud_ERROR((pmd).pud))
+
+#define pud_populate(mm, pmd, pte)		do { } while (0)
+
+/*
+ * (pmds are folded into puds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pud(pudptr, pudval)			set_pmd((pmd_t *)(pudptr), (pmd_t) { pudval })
+
+static inline pmd_t * pmd_offset(pud_t * pud, unsigned long address)
+{
+	return (pmd_t *)pud;
+}
+
+#define pmd_val(x)				(pud_val((x).pud))
+#define __pmd(x)				((pmd_t) { __pud(x) } )
+
+#define pud_page(pud)				(pmd_page((pmd_t){ pud }))
+#define pud_page_vaddr(pud)			(pmd_page_vaddr((pmd_t){ pud }))
+
+/*
+ * allocating and freeing a pmd is trivial: the 1-entry pmd is
+ * inside the pud, so has no extra memory associated with it.
+ */
+#define pmd_alloc_one(mm, address)		NULL
+static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+}
+#define __pmd_free_tlb(tlb, x, a)		do { } while (0)
+
+#undef  pmd_addr_end
+#define pmd_addr_end(addr, end)			(end)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _PGTABLE_NOPMD_H */
diff --git a/include/asm-generic/pgtable-nopud.h b/include/asm-generic/pgtable-nopud.h
new file mode 100644
index 00000000..810431d8
--- /dev/null
+++ b/include/asm-generic/pgtable-nopud.h
@@ -0,0 +1,61 @@
+#ifndef _PGTABLE_NOPUD_H
+#define _PGTABLE_NOPUD_H
+
+#ifndef __ASSEMBLY__
+
+#define __PAGETABLE_PUD_FOLDED
+
+/*
+ * Having the pud type consist of a pgd gets the size right, and allows
+ * us to conceptually access the pgd entry that this pud is folded into
+ * without casting.
+ */
+typedef struct { pgd_t pgd; } pud_t;
+
+#define PUD_SHIFT	PGDIR_SHIFT
+#define PTRS_PER_PUD	1
+#define PUD_SIZE  	(1UL << PUD_SHIFT)
+#define PUD_MASK  	(~(PUD_SIZE-1))
+
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pud is never bad, and a pud always exists (as it's folded
+ * into the pgd entry)
+ */
+static inline int pgd_none(pgd_t pgd)		{ return 0; }
+static inline int pgd_bad(pgd_t pgd)		{ return 0; }
+static inline int pgd_present(pgd_t pgd)	{ return 1; }
+static inline void pgd_clear(pgd_t *pgd)	{ }
+#define pud_ERROR(pud)				(pgd_ERROR((pud).pgd))
+
+#define pgd_populate(mm, pgd, pud)		do { } while (0)
+/*
+ * (puds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pgd(pgdptr, pgdval)			set_pud((pud_t *)(pgdptr), (pud_t) { pgdval })
+
+static inline pud_t * pud_offset(pgd_t * pgd, unsigned long address)
+{
+	return (pud_t *)pgd;
+}
+
+#define pud_val(x)				(pgd_val((x).pgd))
+#define __pud(x)				((pud_t) { __pgd(x) } )
+
+#define pgd_page(pgd)				(pud_page((pud_t){ pgd }))
+#define pgd_page_vaddr(pgd)			(pud_page_vaddr((pud_t){ pgd }))
+
+/*
+ * allocating and freeing a pud is trivial: the 1-entry pud is
+ * inside the pgd, so has no extra memory associated with it.
+ */
+#define pud_alloc_one(mm, address)		NULL
+#define pud_free(mm, x)				do { } while (0)
+#define __pud_free_tlb(tlb, x, a)		do { } while (0)
+
+#undef  pud_addr_end
+#define pud_addr_end(addr, end)			(end)
+
+#endif /* __ASSEMBLY__ */
+#endif /* _PGTABLE_NOPUD_H */
diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
new file mode 100644
index 00000000..c7ec2cdc
--- /dev/null
+++ b/include/asm-generic/pgtable.h
@@ -0,0 +1,538 @@
+#ifndef _ASM_GENERIC_PGTABLE_H
+#define _ASM_GENERIC_PGTABLE_H
+
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_MMU
+
+#include <linux/mm_types.h>
+#include <linux/bug.h>
+
+#ifndef __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+extern int ptep_set_access_flags(struct vm_area_struct *vma,
+				 unsigned long address, pte_t *ptep,
+				 pte_t entry, int dirty);
+#endif
+
+#ifndef __HAVE_ARCH_PMDP_SET_ACCESS_FLAGS
+extern int pmdp_set_access_flags(struct vm_area_struct *vma,
+				 unsigned long address, pmd_t *pmdp,
+				 pmd_t entry, int dirty);
+#endif
+
+#ifndef __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+static inline int ptep_test_and_clear_young(struct vm_area_struct *vma,
+					    unsigned long address,
+					    pte_t *ptep)
+{
+	pte_t pte = *ptep;
+	int r = 1;
+	if (!pte_young(pte))
+		r = 0;
+	else
+		set_pte_at(vma->vm_mm, address, ptep, pte_mkold(pte));
+	return r;
+}
+#endif
+
+#ifndef __HAVE_ARCH_PMDP_TEST_AND_CLEAR_YOUNG
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+static inline int pmdp_test_and_clear_young(struct vm_area_struct *vma,
+					    unsigned long address,
+					    pmd_t *pmdp)
+{
+	pmd_t pmd = *pmdp;
+	int r = 1;
+	if (!pmd_young(pmd))
+		r = 0;
+	else
+		set_pmd_at(vma->vm_mm, address, pmdp, pmd_mkold(pmd));
+	return r;
+}
+#else /* CONFIG_TRANSPARENT_HUGEPAGE */
+static inline int pmdp_test_and_clear_young(struct vm_area_struct *vma,
+					    unsigned long address,
+					    pmd_t *pmdp)
+{
+	BUG();
+	return 0;
+}
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+#endif
+
+#ifndef __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
+int ptep_clear_flush_young(struct vm_area_struct *vma,
+			   unsigned long address, pte_t *ptep);
+#endif
+
+#ifndef __HAVE_ARCH_PMDP_CLEAR_YOUNG_FLUSH
+int pmdp_clear_flush_young(struct vm_area_struct *vma,
+			   unsigned long address, pmd_t *pmdp);
+#endif
+
+#ifndef __HAVE_ARCH_PTEP_GET_AND_CLEAR
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
+				       unsigned long address,
+				       pte_t *ptep)
+{
+	pte_t pte = *ptep;
+	pte_clear(mm, address, ptep);
+	return pte;
+}
+#endif
+
+#ifndef __HAVE_ARCH_PMDP_GET_AND_CLEAR
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+static inline pmd_t pmdp_get_and_clear(struct mm_struct *mm,
+				       unsigned long address,
+				       pmd_t *pmdp)
+{
+	pmd_t pmd = *pmdp;
+	pmd_clear(mm, address, pmdp);
+	return pmd;
+}
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+#endif
+
+#ifndef __HAVE_ARCH_PTEP_GET_AND_CLEAR_FULL
+static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm,
+					    unsigned long address, pte_t *ptep,
+					    int full)
+{
+	pte_t pte;
+	pte = ptep_get_and_clear(mm, address, ptep);
+	return pte;
+}
+#endif
+
+/*
+ * Some architectures may be able to avoid expensive synchronization
+ * primitives when modifications are made to PTE's which are already
+ * not present, or in the process of an address space destruction.
+ */
+#ifndef __HAVE_ARCH_PTE_CLEAR_NOT_PRESENT_FULL
+static inline void pte_clear_not_present_full(struct mm_struct *mm,
+					      unsigned long address,
+					      pte_t *ptep,
+					      int full)
+{
+	pte_clear(mm, address, ptep);
+}
+#endif
+
+#ifndef __HAVE_ARCH_PTEP_CLEAR_FLUSH
+extern pte_t ptep_clear_flush(struct vm_area_struct *vma,
+			      unsigned long address,
+			      pte_t *ptep);
+#endif
+
+#ifndef __HAVE_ARCH_PMDP_CLEAR_FLUSH
+extern pmd_t pmdp_clear_flush(struct vm_area_struct *vma,
+			      unsigned long address,
+			      pmd_t *pmdp);
+#endif
+
+#ifndef __HAVE_ARCH_PTEP_SET_WRPROTECT
+struct mm_struct;
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long address, pte_t *ptep)
+{
+	pte_t old_pte = *ptep;
+	set_pte_at(mm, address, ptep, pte_wrprotect(old_pte));
+}
+#endif
+
+#ifndef __HAVE_ARCH_PMDP_SET_WRPROTECT
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+static inline void pmdp_set_wrprotect(struct mm_struct *mm,
+				      unsigned long address, pmd_t *pmdp)
+{
+	pmd_t old_pmd = *pmdp;
+	set_pmd_at(mm, address, pmdp, pmd_wrprotect(old_pmd));
+}
+#else /* CONFIG_TRANSPARENT_HUGEPAGE */
+static inline void pmdp_set_wrprotect(struct mm_struct *mm,
+				      unsigned long address, pmd_t *pmdp)
+{
+	BUG();
+}
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+#endif
+
+#ifndef __HAVE_ARCH_PMDP_SPLITTING_FLUSH
+extern pmd_t pmdp_splitting_flush(struct vm_area_struct *vma,
+				  unsigned long address,
+				  pmd_t *pmdp);
+#endif
+
+#ifndef __HAVE_ARCH_PTE_SAME
+static inline int pte_same(pte_t pte_a, pte_t pte_b)
+{
+	return pte_val(pte_a) == pte_val(pte_b);
+}
+#endif
+
+#ifndef __HAVE_ARCH_PMD_SAME
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+static inline int pmd_same(pmd_t pmd_a, pmd_t pmd_b)
+{
+	return pmd_val(pmd_a) == pmd_val(pmd_b);
+}
+#else /* CONFIG_TRANSPARENT_HUGEPAGE */
+static inline int pmd_same(pmd_t pmd_a, pmd_t pmd_b)
+{
+	BUG();
+	return 0;
+}
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+#endif
+
+#ifndef __HAVE_ARCH_PAGE_TEST_AND_CLEAR_DIRTY
+#define page_test_and_clear_dirty(pfn, mapped)	(0)
+#endif
+
+#ifndef __HAVE_ARCH_PAGE_TEST_AND_CLEAR_DIRTY
+#define pte_maybe_dirty(pte)		pte_dirty(pte)
+#else
+#define pte_maybe_dirty(pte)		(1)
+#endif
+
+#ifndef __HAVE_ARCH_PAGE_TEST_AND_CLEAR_YOUNG
+#define page_test_and_clear_young(pfn) (0)
+#endif
+
+#ifndef __HAVE_ARCH_PGD_OFFSET_GATE
+#define pgd_offset_gate(mm, addr)	pgd_offset(mm, addr)
+#endif
+
+#ifndef __HAVE_ARCH_MOVE_PTE
+#define move_pte(pte, prot, old_addr, new_addr)	(pte)
+#endif
+
+#ifndef flush_tlb_fix_spurious_fault
+#define flush_tlb_fix_spurious_fault(vma, address) flush_tlb_page(vma, address)
+#endif
+
+#ifndef pgprot_noncached
+#define pgprot_noncached(prot)	(prot)
+#endif
+
+#ifndef pgprot_writecombine
+#define pgprot_writecombine pgprot_noncached
+#endif
+
+/*
+ * When walking page tables, get the address of the next boundary,
+ * or the end address of the range if that comes earlier.  Although no
+ * vma end wraps to 0, rounded up __boundary may wrap to 0 throughout.
+ */
+
+#define pgd_addr_end(addr, end)						\
+({	unsigned long __boundary = ((addr) + PGDIR_SIZE) & PGDIR_MASK;	\
+	(__boundary - 1 < (end) - 1)? __boundary: (end);		\
+})
+
+#ifndef pud_addr_end
+#define pud_addr_end(addr, end)						\
+({	unsigned long __boundary = ((addr) + PUD_SIZE) & PUD_MASK;	\
+	(__boundary - 1 < (end) - 1)? __boundary: (end);		\
+})
+#endif
+
+#ifndef pmd_addr_end
+#define pmd_addr_end(addr, end)						\
+({	unsigned long __boundary = ((addr) + PMD_SIZE) & PMD_MASK;	\
+	(__boundary - 1 < (end) - 1)? __boundary: (end);		\
+})
+#endif
+
+/*
+ * When walking page tables, we usually want to skip any p?d_none entries;
+ * and any p?d_bad entries - reporting the error before resetting to none.
+ * Do the tests inline, but report and clear the bad entry in mm/memory.c.
+ */
+void pgd_clear_bad(pgd_t *);
+void pud_clear_bad(pud_t *);
+void pmd_clear_bad(pmd_t *);
+
+static inline int pgd_none_or_clear_bad(pgd_t *pgd)
+{
+	if (pgd_none(*pgd))
+		return 1;
+	if (unlikely(pgd_bad(*pgd))) {
+		pgd_clear_bad(pgd);
+		return 1;
+	}
+	return 0;
+}
+
+static inline int pud_none_or_clear_bad(pud_t *pud)
+{
+	if (pud_none(*pud))
+		return 1;
+	if (unlikely(pud_bad(*pud))) {
+		pud_clear_bad(pud);
+		return 1;
+	}
+	return 0;
+}
+
+static inline int pmd_none_or_clear_bad(pmd_t *pmd)
+{
+	if (pmd_none(*pmd))
+		return 1;
+	if (unlikely(pmd_bad(*pmd))) {
+		pmd_clear_bad(pmd);
+		return 1;
+	}
+	return 0;
+}
+
+static inline pte_t __ptep_modify_prot_start(struct mm_struct *mm,
+					     unsigned long addr,
+					     pte_t *ptep)
+{
+	/*
+	 * Get the current pte state, but zero it out to make it
+	 * non-present, preventing the hardware from asynchronously
+	 * updating it.
+	 */
+	return ptep_get_and_clear(mm, addr, ptep);
+}
+
+static inline void __ptep_modify_prot_commit(struct mm_struct *mm,
+					     unsigned long addr,
+					     pte_t *ptep, pte_t pte)
+{
+	/*
+	 * The pte is non-present, so there's no hardware state to
+	 * preserve.
+	 */
+	set_pte_at(mm, addr, ptep, pte);
+}
+
+#ifndef __HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION
+/*
+ * Start a pte protection read-modify-write transaction, which
+ * protects against asynchronous hardware modifications to the pte.
+ * The intention is not to prevent the hardware from making pte
+ * updates, but to prevent any updates it may make from being lost.
+ *
+ * This does not protect against other software modifications of the
+ * pte; the appropriate pte lock must be held over the transation.
+ *
+ * Note that this interface is intended to be batchable, meaning that
+ * ptep_modify_prot_commit may not actually update the pte, but merely
+ * queue the update to be done at some later time.  The update must be
+ * actually committed before the pte lock is released, however.
+ */
+static inline pte_t ptep_modify_prot_start(struct mm_struct *mm,
+					   unsigned long addr,
+					   pte_t *ptep)
+{
+	return __ptep_modify_prot_start(mm, addr, ptep);
+}
+
+/*
+ * Commit an update to a pte, leaving any hardware-controlled bits in
+ * the PTE unmodified.
+ */
+static inline void ptep_modify_prot_commit(struct mm_struct *mm,
+					   unsigned long addr,
+					   pte_t *ptep, pte_t pte)
+{
+	__ptep_modify_prot_commit(mm, addr, ptep, pte);
+}
+#endif /* __HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION */
+#endif /* CONFIG_MMU */
+
+/*
+ * A facility to provide lazy MMU batching.  This allows PTE updates and
+ * page invalidations to be delayed until a call to leave lazy MMU mode
+ * is issued.  Some architectures may benefit from doing this, and it is
+ * beneficial for both shadow and direct mode hypervisors, which may batch
+ * the PTE updates which happen during this window.  Note that using this
+ * interface requires that read hazards be removed from the code.  A read
+ * hazard could result in the direct mode hypervisor case, since the actual
+ * write to the page tables may not yet have taken place, so reads though
+ * a raw PTE pointer after it has been modified are not guaranteed to be
+ * up to date.  This mode can only be entered and left under the protection of
+ * the page table locks for all page tables which may be modified.  In the UP
+ * case, this is required so that preemption is disabled, and in the SMP case,
+ * it must synchronize the delayed page table writes properly on other CPUs.
+ */
+#ifndef __HAVE_ARCH_ENTER_LAZY_MMU_MODE
+#define arch_enter_lazy_mmu_mode()	do {} while (0)
+#define arch_leave_lazy_mmu_mode()	do {} while (0)
+#define arch_flush_lazy_mmu_mode()	do {} while (0)
+#endif
+
+/*
+ * A facility to provide batching of the reload of page tables and
+ * other process state with the actual context switch code for
+ * paravirtualized guests.  By convention, only one of the batched
+ * update (lazy) modes (CPU, MMU) should be active at any given time,
+ * entry should never be nested, and entry and exits should always be
+ * paired.  This is for sanity of maintaining and reasoning about the
+ * kernel code.  In this case, the exit (end of the context switch) is
+ * in architecture-specific code, and so doesn't need a generic
+ * definition.
+ */
+#ifndef __HAVE_ARCH_START_CONTEXT_SWITCH
+#define arch_start_context_switch(prev)	do {} while (0)
+#endif
+
+#ifndef __HAVE_PFNMAP_TRACKING
+/*
+ * Interface that can be used by architecture code to keep track of
+ * memory type of pfn mappings (remap_pfn_range, vm_insert_pfn)
+ *
+ * track_pfn_vma_new is called when a _new_ pfn mapping is being established
+ * for physical range indicated by pfn and size.
+ */
+static inline int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t *prot,
+					unsigned long pfn, unsigned long size)
+{
+	return 0;
+}
+
+/*
+ * Interface that can be used by architecture code to keep track of
+ * memory type of pfn mappings (remap_pfn_range, vm_insert_pfn)
+ *
+ * track_pfn_vma_copy is called when vma that is covering the pfnmap gets
+ * copied through copy_page_range().
+ */
+static inline int track_pfn_vma_copy(struct vm_area_struct *vma)
+{
+	return 0;
+}
+
+/*
+ * Interface that can be used by architecture code to keep track of
+ * memory type of pfn mappings (remap_pfn_range, vm_insert_pfn)
+ *
+ * untrack_pfn_vma is called while unmapping a pfnmap for a region.
+ * untrack can be called for a specific region indicated by pfn and size or
+ * can be for the entire vma (in which case size can be zero).
+ */
+static inline void untrack_pfn_vma(struct vm_area_struct *vma,
+					unsigned long pfn, unsigned long size)
+{
+}
+#else
+extern int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t *prot,
+				unsigned long pfn, unsigned long size);
+extern int track_pfn_vma_copy(struct vm_area_struct *vma);
+extern void untrack_pfn_vma(struct vm_area_struct *vma, unsigned long pfn,
+				unsigned long size);
+#endif
+
+#ifdef CONFIG_MMU
+
+#ifndef CONFIG_TRANSPARENT_HUGEPAGE
+static inline int pmd_trans_huge(pmd_t pmd)
+{
+	return 0;
+}
+static inline int pmd_trans_splitting(pmd_t pmd)
+{
+	return 0;
+}
+#ifndef __HAVE_ARCH_PMD_WRITE
+static inline int pmd_write(pmd_t pmd)
+{
+	BUG();
+	return 0;
+}
+#endif /* __HAVE_ARCH_PMD_WRITE */
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+
+#ifndef pmd_read_atomic
+static inline pmd_t pmd_read_atomic(pmd_t *pmdp)
+{
+	/*
+	 * Depend on compiler for an atomic pmd read. NOTE: this is
+	 * only going to work, if the pmdval_t isn't larger than
+	 * an unsigned long.
+	 */
+	return *pmdp;
+}
+#endif
+
+/*
+ * This function is meant to be used by sites walking pagetables with
+ * the mmap_sem hold in read mode to protect against MADV_DONTNEED and
+ * transhuge page faults. MADV_DONTNEED can convert a transhuge pmd
+ * into a null pmd and the transhuge page fault can convert a null pmd
+ * into an hugepmd or into a regular pmd (if the hugepage allocation
+ * fails). While holding the mmap_sem in read mode the pmd becomes
+ * stable and stops changing under us only if it's not null and not a
+ * transhuge pmd. When those races occurs and this function makes a
+ * difference vs the standard pmd_none_or_clear_bad, the result is
+ * undefined so behaving like if the pmd was none is safe (because it
+ * can return none anyway). The compiler level barrier() is critically
+ * important to compute the two checks atomically on the same pmdval.
+ *
+ * For 32bit kernels with a 64bit large pmd_t this automatically takes
+ * care of reading the pmd atomically to avoid SMP race conditions
+ * against pmd_populate() when the mmap_sem is hold for reading by the
+ * caller (a special atomic read not done by "gcc" as in the generic
+ * version above, is also needed when THP is disabled because the page
+ * fault can populate the pmd from under us).
+ */
+static inline int pmd_none_or_trans_huge_or_clear_bad(pmd_t *pmd)
+{
+	pmd_t pmdval = pmd_read_atomic(pmd);
+	/*
+	 * The barrier will stabilize the pmdval in a register or on
+	 * the stack so that it will stop changing under the code.
+	 *
+	 * When CONFIG_TRANSPARENT_HUGEPAGE=y on x86 32bit PAE,
+	 * pmd_read_atomic is allowed to return a not atomic pmdval
+	 * (for example pointing to an hugepage that has never been
+	 * mapped in the pmd). The below checks will only care about
+	 * the low part of the pmd with 32bit PAE x86 anyway, with the
+	 * exception of pmd_none(). So the important thing is that if
+	 * the low part of the pmd is found null, the high part will
+	 * be also null or the pmd_none() check below would be
+	 * confused.
+	 */
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+	barrier();
+#endif
+	if (pmd_none(pmdval))
+		return 1;
+	if (unlikely(pmd_bad(pmdval))) {
+		if (!pmd_trans_huge(pmdval))
+			pmd_clear_bad(pmd);
+		return 1;
+	}
+	return 0;
+}
+
+/*
+ * This is a noop if Transparent Hugepage Support is not built into
+ * the kernel. Otherwise it is equivalent to
+ * pmd_none_or_trans_huge_or_clear_bad(), and shall only be called in
+ * places that already verified the pmd is not none and they want to
+ * walk ptes while holding the mmap sem in read mode (write mode don't
+ * need this). If THP is not enabled, the pmd can't go away under the
+ * code even if MADV_DONTNEED runs, but if THP is enabled we need to
+ * run a pmd_trans_unstable before walking the ptes after
+ * split_huge_page_pmd returns (because it may have run when the pmd
+ * become null, but then a page fault can map in a THP and not a
+ * regular page).
+ */
+static inline int pmd_trans_unstable(pmd_t *pmd)
+{
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+	return pmd_none_or_trans_huge_or_clear_bad(pmd);
+#else
+	return 0;
+#endif
+}
+
+#endif /* CONFIG_MMU */
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_GENERIC_PGTABLE_H */
diff --git a/include/asm-generic/poll.h b/include/asm-generic/poll.h
new file mode 100644
index 00000000..9ce7f44a
--- /dev/null
+++ b/include/asm-generic/poll.h
@@ -0,0 +1,39 @@
+#ifndef __ASM_GENERIC_POLL_H
+#define __ASM_GENERIC_POLL_H
+
+/* These are specified by iBCS2 */
+#define POLLIN		0x0001
+#define POLLPRI		0x0002
+#define POLLOUT		0x0004
+#define POLLERR		0x0008
+#define POLLHUP		0x0010
+#define POLLNVAL	0x0020
+
+/* The rest seem to be more-or-less nonstandard. Check them! */
+#define POLLRDNORM	0x0040
+#define POLLRDBAND	0x0080
+#ifndef POLLWRNORM
+#define POLLWRNORM	0x0100
+#endif
+#ifndef POLLWRBAND
+#define POLLWRBAND	0x0200
+#endif
+#ifndef POLLMSG
+#define POLLMSG		0x0400
+#endif
+#ifndef POLLREMOVE
+#define POLLREMOVE	0x1000
+#endif
+#ifndef POLLRDHUP
+#define POLLRDHUP       0x2000
+#endif
+
+#define POLLFREE	0x4000	/* currently only for epoll */
+
+struct pollfd {
+	int fd;
+	short events;
+	short revents;
+};
+
+#endif	/* __ASM_GENERIC_POLL_H */
diff --git a/include/asm-generic/posix_types.h b/include/asm-generic/posix_types.h
new file mode 100644
index 00000000..91d44bd4
--- /dev/null
+++ b/include/asm-generic/posix_types.h
@@ -0,0 +1,100 @@
+#ifndef __ASM_GENERIC_POSIX_TYPES_H
+#define __ASM_GENERIC_POSIX_TYPES_H
+
+#include <asm/bitsperlong.h>
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.
+ *
+ * First the types that are often defined in different ways across
+ * architectures, so that you can override them.
+ */
+
+#ifndef __kernel_long_t
+typedef long		__kernel_long_t;
+typedef unsigned long	__kernel_ulong_t;
+#endif
+
+#ifndef __kernel_ino_t
+typedef __kernel_ulong_t __kernel_ino_t;
+#endif
+
+#ifndef __kernel_mode_t
+typedef unsigned int	__kernel_mode_t;
+#endif
+
+#ifndef __kernel_nlink_t
+typedef __kernel_ulong_t __kernel_nlink_t;
+#endif
+
+#ifndef __kernel_pid_t
+typedef int		__kernel_pid_t;
+#endif
+
+#ifndef __kernel_ipc_pid_t
+typedef int		__kernel_ipc_pid_t;
+#endif
+
+#ifndef __kernel_uid_t
+typedef unsigned int	__kernel_uid_t;
+typedef unsigned int	__kernel_gid_t;
+#endif
+
+#ifndef __kernel_suseconds_t
+typedef __kernel_long_t		__kernel_suseconds_t;
+#endif
+
+#ifndef __kernel_daddr_t
+typedef int		__kernel_daddr_t;
+#endif
+
+#ifndef __kernel_uid32_t
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+#endif
+
+#ifndef __kernel_old_uid_t
+typedef __kernel_uid_t	__kernel_old_uid_t;
+typedef __kernel_gid_t	__kernel_old_gid_t;
+#endif
+
+#ifndef __kernel_old_dev_t
+typedef unsigned int	__kernel_old_dev_t;
+#endif
+
+/*
+ * Most 32 bit architectures use "unsigned int" size_t,
+ * and all 64 bit architectures use "unsigned long" size_t.
+ */
+#ifndef __kernel_size_t
+#if __BITS_PER_LONG != 64
+typedef unsigned int	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef int		__kernel_ptrdiff_t;
+#else
+typedef __kernel_ulong_t __kernel_size_t;
+typedef __kernel_long_t	__kernel_ssize_t;
+typedef __kernel_long_t	__kernel_ptrdiff_t;
+#endif
+#endif
+
+#ifndef __kernel_fsid_t
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+#endif
+
+/*
+ * anything below here should be completely generic
+ */
+typedef __kernel_long_t	__kernel_off_t;
+typedef long long	__kernel_loff_t;
+typedef __kernel_long_t	__kernel_time_t;
+typedef __kernel_long_t	__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+
+#endif /* __ASM_GENERIC_POSIX_TYPES_H */
diff --git a/include/asm-generic/ptrace.h b/include/asm-generic/ptrace.h
new file mode 100644
index 00000000..82e674f6
--- /dev/null
+++ b/include/asm-generic/ptrace.h
@@ -0,0 +1,74 @@
+/*
+ * Common low level (register) ptrace helpers
+ *
+ * Copyright 2004-2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_GENERIC_PTRACE_H__
+#define __ASM_GENERIC_PTRACE_H__
+
+#ifndef __ASSEMBLY__
+
+/* Helpers for working with the instruction pointer */
+#ifndef GET_IP
+#define GET_IP(regs) ((regs)->pc)
+#endif
+#ifndef SET_IP
+#define SET_IP(regs, val) (GET_IP(regs) = (val))
+#endif
+
+static inline unsigned long instruction_pointer(struct pt_regs *regs)
+{
+	return GET_IP(regs);
+}
+static inline void instruction_pointer_set(struct pt_regs *regs,
+                                           unsigned long val)
+{
+	SET_IP(regs, val);
+}
+
+#ifndef profile_pc
+#define profile_pc(regs) instruction_pointer(regs)
+#endif
+
+/* Helpers for working with the user stack pointer */
+#ifndef GET_USP
+#define GET_USP(regs) ((regs)->usp)
+#endif
+#ifndef SET_USP
+#define SET_USP(regs, val) (GET_USP(regs) = (val))
+#endif
+
+static inline unsigned long user_stack_pointer(struct pt_regs *regs)
+{
+	return GET_USP(regs);
+}
+static inline void user_stack_pointer_set(struct pt_regs *regs,
+                                          unsigned long val)
+{
+	SET_USP(regs, val);
+}
+
+/* Helpers for working with the frame pointer */
+#ifndef GET_FP
+#define GET_FP(regs) ((regs)->fp)
+#endif
+#ifndef SET_FP
+#define SET_FP(regs, val) (GET_FP(regs) = (val))
+#endif
+
+static inline unsigned long frame_pointer(struct pt_regs *regs)
+{
+	return GET_FP(regs);
+}
+static inline void frame_pointer_set(struct pt_regs *regs,
+                                     unsigned long val)
+{
+	SET_FP(regs, val);
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/include/asm-generic/resource.h b/include/asm-generic/resource.h
new file mode 100644
index 00000000..61fa862f
--- /dev/null
+++ b/include/asm-generic/resource.h
@@ -0,0 +1,94 @@
+#ifndef _ASM_GENERIC_RESOURCE_H
+#define _ASM_GENERIC_RESOURCE_H
+
+/*
+ * Resource limit IDs
+ *
+ * ( Compatibility detail: there are architectures that have
+ *   a different rlimit ID order in the 5-9 range and want
+ *   to keep that order for binary compatibility. The reasons
+ *   are historic and all new rlimits are identical across all
+ *   arches. If an arch has such special order for some rlimits
+ *   then it defines them prior including asm-generic/resource.h. )
+ */
+
+#define RLIMIT_CPU		0	/* CPU time in sec */
+#define RLIMIT_FSIZE		1	/* Maximum filesize */
+#define RLIMIT_DATA		2	/* max data size */
+#define RLIMIT_STACK		3	/* max stack size */
+#define RLIMIT_CORE		4	/* max core file size */
+
+#ifndef RLIMIT_RSS
+# define RLIMIT_RSS		5	/* max resident set size */
+#endif
+
+#ifndef RLIMIT_NPROC
+# define RLIMIT_NPROC		6	/* max number of processes */
+#endif
+
+#ifndef RLIMIT_NOFILE
+# define RLIMIT_NOFILE		7	/* max number of open files */
+#endif
+
+#ifndef RLIMIT_MEMLOCK
+# define RLIMIT_MEMLOCK		8	/* max locked-in-memory address space */
+#endif
+
+#ifndef RLIMIT_AS
+# define RLIMIT_AS		9	/* address space limit */
+#endif
+
+#define RLIMIT_LOCKS		10	/* maximum file locks held */
+#define RLIMIT_SIGPENDING	11	/* max number of pending signals */
+#define RLIMIT_MSGQUEUE		12	/* maximum bytes in POSIX mqueues */
+#define RLIMIT_NICE		13	/* max nice prio allowed to raise to
+					   0-39 for nice level 19 .. -20 */
+#define RLIMIT_RTPRIO		14	/* maximum realtime priority */
+#define RLIMIT_RTTIME		15	/* timeout for RT tasks in us */
+#define RLIM_NLIMITS		16
+
+/*
+ * SuS says limits have to be unsigned.
+ * Which makes a ton more sense anyway.
+ *
+ * Some architectures override this (for compatibility reasons):
+ */
+#ifndef RLIM_INFINITY
+# define RLIM_INFINITY		(~0UL)
+#endif
+
+/*
+ * RLIMIT_STACK default maximum - some architectures override it:
+ */
+#ifndef _STK_LIM_MAX
+# define _STK_LIM_MAX		RLIM_INFINITY
+#endif
+
+#ifdef __KERNEL__
+
+/*
+ * boot-time rlimit defaults for the init task:
+ */
+#define INIT_RLIMITS							\
+{									\
+	[RLIMIT_CPU]		= {  RLIM_INFINITY,  RLIM_INFINITY },	\
+	[RLIMIT_FSIZE]		= {  RLIM_INFINITY,  RLIM_INFINITY },	\
+	[RLIMIT_DATA]		= {  RLIM_INFINITY,  RLIM_INFINITY },	\
+	[RLIMIT_STACK]		= {       _STK_LIM,   _STK_LIM_MAX },	\
+	[RLIMIT_CORE]		= {              0,  RLIM_INFINITY },	\
+	[RLIMIT_RSS]		= {  RLIM_INFINITY,  RLIM_INFINITY },	\
+	[RLIMIT_NPROC]		= {              0,              0 },	\
+	[RLIMIT_NOFILE]		= {   INR_OPEN_CUR,   INR_OPEN_MAX },	\
+	[RLIMIT_MEMLOCK]	= {    MLOCK_LIMIT,    MLOCK_LIMIT },	\
+	[RLIMIT_AS]		= {  RLIM_INFINITY,  RLIM_INFINITY },	\
+	[RLIMIT_LOCKS]		= {  RLIM_INFINITY,  RLIM_INFINITY },	\
+	[RLIMIT_SIGPENDING]	= { 		0,	       0 },	\
+	[RLIMIT_MSGQUEUE]	= {   MQ_BYTES_MAX,   MQ_BYTES_MAX },	\
+	[RLIMIT_NICE]		= { 0, 0 },				\
+	[RLIMIT_RTPRIO]		= { 0, 0 },				\
+	[RLIMIT_RTTIME]		= {  RLIM_INFINITY,  RLIM_INFINITY },	\
+}
+
+#endif	/* __KERNEL__ */
+
+#endif
diff --git a/include/asm-generic/rtc.h b/include/asm-generic/rtc.h
new file mode 100644
index 00000000..fa86f240
--- /dev/null
+++ b/include/asm-generic/rtc.h
@@ -0,0 +1,218 @@
+/* 
+ * include/asm-generic/rtc.h
+ *
+ * Author: Tom Rini <trini@mvista.com>
+ *
+ * Based on:
+ * drivers/char/rtc.c
+ *
+ * Please read the COPYING file for all license details.
+ */
+
+#ifndef __ASM_RTC_H__
+#define __ASM_RTC_H__
+
+#include <linux/mc146818rtc.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/delay.h>
+
+#define RTC_PIE 0x40		/* periodic interrupt enable */
+#define RTC_AIE 0x20		/* alarm interrupt enable */
+#define RTC_UIE 0x10		/* update-finished interrupt enable */
+
+/* some dummy definitions */
+#define RTC_BATT_BAD 0x100	/* battery bad */
+#define RTC_SQWE 0x08		/* enable square-wave output */
+#define RTC_DM_BINARY 0x04	/* all time/date values are BCD if clear */
+#define RTC_24H 0x02		/* 24 hour mode - else hours bit 7 means pm */
+#define RTC_DST_EN 0x01	        /* auto switch DST - works f. USA only */
+
+/*
+ * Returns true if a clock update is in progress
+ */
+static inline unsigned char rtc_is_updating(void)
+{
+	unsigned char uip;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtc_lock, flags);
+	uip = (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP);
+	spin_unlock_irqrestore(&rtc_lock, flags);
+	return uip;
+}
+
+static inline unsigned int __get_rtc_time(struct rtc_time *time)
+{
+	unsigned char ctrl;
+	unsigned long flags;
+
+#ifdef CONFIG_MACH_DECSTATION
+	unsigned int real_year;
+#endif
+
+	/*
+	 * read RTC once any update in progress is done. The update
+	 * can take just over 2ms. We wait 20ms. There is no need to
+	 * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP.
+	 * If you need to know *exactly* when a second has started, enable
+	 * periodic update complete interrupts, (via ioctl) and then 
+	 * immediately read /dev/rtc which will block until you get the IRQ.
+	 * Once the read clears, read the RTC time (again via ioctl). Easy.
+	 */
+	if (rtc_is_updating())
+		mdelay(20);
+
+	/*
+	 * Only the values that we read from the RTC are set. We leave
+	 * tm_wday, tm_yday and tm_isdst untouched. Even though the
+	 * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
+	 * by the RTC when initially set to a non-zero value.
+	 */
+	spin_lock_irqsave(&rtc_lock, flags);
+	time->tm_sec = CMOS_READ(RTC_SECONDS);
+	time->tm_min = CMOS_READ(RTC_MINUTES);
+	time->tm_hour = CMOS_READ(RTC_HOURS);
+	time->tm_mday = CMOS_READ(RTC_DAY_OF_MONTH);
+	time->tm_mon = CMOS_READ(RTC_MONTH);
+	time->tm_year = CMOS_READ(RTC_YEAR);
+#ifdef CONFIG_MACH_DECSTATION
+	real_year = CMOS_READ(RTC_DEC_YEAR);
+#endif
+	ctrl = CMOS_READ(RTC_CONTROL);
+	spin_unlock_irqrestore(&rtc_lock, flags);
+
+	if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+	{
+		time->tm_sec = bcd2bin(time->tm_sec);
+		time->tm_min = bcd2bin(time->tm_min);
+		time->tm_hour = bcd2bin(time->tm_hour);
+		time->tm_mday = bcd2bin(time->tm_mday);
+		time->tm_mon = bcd2bin(time->tm_mon);
+		time->tm_year = bcd2bin(time->tm_year);
+	}
+
+#ifdef CONFIG_MACH_DECSTATION
+	time->tm_year += real_year - 72;
+#endif
+
+	/*
+	 * Account for differences between how the RTC uses the values
+	 * and how they are defined in a struct rtc_time;
+	 */
+	if (time->tm_year <= 69)
+		time->tm_year += 100;
+
+	time->tm_mon--;
+
+	return RTC_24H;
+}
+
+#ifndef get_rtc_time
+#define get_rtc_time	__get_rtc_time
+#endif
+
+/* Set the current date and time in the real time clock. */
+static inline int __set_rtc_time(struct rtc_time *time)
+{
+	unsigned long flags;
+	unsigned char mon, day, hrs, min, sec;
+	unsigned char save_control, save_freq_select;
+	unsigned int yrs;
+#ifdef CONFIG_MACH_DECSTATION
+	unsigned int real_yrs, leap_yr;
+#endif
+
+	yrs = time->tm_year;
+	mon = time->tm_mon + 1;   /* tm_mon starts at zero */
+	day = time->tm_mday;
+	hrs = time->tm_hour;
+	min = time->tm_min;
+	sec = time->tm_sec;
+
+	if (yrs > 255)	/* They are unsigned */
+		return -EINVAL;
+
+	spin_lock_irqsave(&rtc_lock, flags);
+#ifdef CONFIG_MACH_DECSTATION
+	real_yrs = yrs;
+	leap_yr = ((!((yrs + 1900) % 4) && ((yrs + 1900) % 100)) ||
+			!((yrs + 1900) % 400));
+	yrs = 72;
+
+	/*
+	 * We want to keep the year set to 73 until March
+	 * for non-leap years, so that Feb, 29th is handled
+	 * correctly.
+	 */
+	if (!leap_yr && mon < 3) {
+		real_yrs--;
+		yrs = 73;
+	}
+#endif
+	/* These limits and adjustments are independent of
+	 * whether the chip is in binary mode or not.
+	 */
+	if (yrs > 169) {
+		spin_unlock_irqrestore(&rtc_lock, flags);
+		return -EINVAL;
+	}
+
+	if (yrs >= 100)
+		yrs -= 100;
+
+	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY)
+	    || RTC_ALWAYS_BCD) {
+		sec = bin2bcd(sec);
+		min = bin2bcd(min);
+		hrs = bin2bcd(hrs);
+		day = bin2bcd(day);
+		mon = bin2bcd(mon);
+		yrs = bin2bcd(yrs);
+	}
+
+	save_control = CMOS_READ(RTC_CONTROL);
+	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
+	save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
+	CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
+
+#ifdef CONFIG_MACH_DECSTATION
+	CMOS_WRITE(real_yrs, RTC_DEC_YEAR);
+#endif
+	CMOS_WRITE(yrs, RTC_YEAR);
+	CMOS_WRITE(mon, RTC_MONTH);
+	CMOS_WRITE(day, RTC_DAY_OF_MONTH);
+	CMOS_WRITE(hrs, RTC_HOURS);
+	CMOS_WRITE(min, RTC_MINUTES);
+	CMOS_WRITE(sec, RTC_SECONDS);
+
+	CMOS_WRITE(save_control, RTC_CONTROL);
+	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+
+	spin_unlock_irqrestore(&rtc_lock, flags);
+
+	return 0;
+}
+
+#ifndef set_rtc_time
+#define set_rtc_time	__set_rtc_time
+#endif
+
+static inline unsigned int get_rtc_ss(void)
+{
+	struct rtc_time h;
+
+	get_rtc_time(&h);
+	return h.tm_sec;
+}
+
+static inline int get_rtc_pll(struct rtc_pll_info *pll)
+{
+	return -EINVAL;
+}
+static inline int set_rtc_pll(struct rtc_pll_info *pll)
+{
+	return -EINVAL;
+}
+
+#endif /* __ASM_RTC_H__ */
diff --git a/include/asm-generic/rwsem.h b/include/asm-generic/rwsem.h
new file mode 100644
index 00000000..bb1e2cde
--- /dev/null
+++ b/include/asm-generic/rwsem.h
@@ -0,0 +1,132 @@
+#ifndef _ASM_POWERPC_RWSEM_H
+#define _ASM_POWERPC_RWSEM_H
+
+#ifndef _LINUX_RWSEM_H
+#error "Please don't include <asm/rwsem.h> directly, use <linux/rwsem.h> instead."
+#endif
+
+#ifdef __KERNEL__
+
+/*
+ * R/W semaphores for PPC using the stuff in lib/rwsem.c.
+ * Adapted largely from include/asm-i386/rwsem.h
+ * by Paul Mackerras <paulus@samba.org>.
+ */
+
+/*
+ * the semaphore definition
+ */
+#ifdef CONFIG_PPC64
+# define RWSEM_ACTIVE_MASK		0xffffffffL
+#else
+# define RWSEM_ACTIVE_MASK		0x0000ffffL
+#endif
+
+#define RWSEM_UNLOCKED_VALUE		0x00000000L
+#define RWSEM_ACTIVE_BIAS		0x00000001L
+#define RWSEM_WAITING_BIAS		(-RWSEM_ACTIVE_MASK-1)
+#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+
+/*
+ * lock for reading
+ */
+static inline void __down_read(struct rw_semaphore *sem)
+{
+	if (unlikely(atomic_long_inc_return((atomic_long_t *)&sem->count) <= 0))
+		rwsem_down_read_failed(sem);
+}
+
+static inline int __down_read_trylock(struct rw_semaphore *sem)
+{
+	long tmp;
+
+	while ((tmp = sem->count) >= 0) {
+		if (tmp == cmpxchg(&sem->count, tmp,
+				   tmp + RWSEM_ACTIVE_READ_BIAS)) {
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/*
+ * lock for writing
+ */
+static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
+{
+	long tmp;
+
+	tmp = atomic_long_add_return(RWSEM_ACTIVE_WRITE_BIAS,
+				     (atomic_long_t *)&sem->count);
+	if (unlikely(tmp != RWSEM_ACTIVE_WRITE_BIAS))
+		rwsem_down_write_failed(sem);
+}
+
+static inline void __down_write(struct rw_semaphore *sem)
+{
+	__down_write_nested(sem, 0);
+}
+
+static inline int __down_write_trylock(struct rw_semaphore *sem)
+{
+	long tmp;
+
+	tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE,
+		      RWSEM_ACTIVE_WRITE_BIAS);
+	return tmp == RWSEM_UNLOCKED_VALUE;
+}
+
+/*
+ * unlock after reading
+ */
+static inline void __up_read(struct rw_semaphore *sem)
+{
+	long tmp;
+
+	tmp = atomic_long_dec_return((atomic_long_t *)&sem->count);
+	if (unlikely(tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0))
+		rwsem_wake(sem);
+}
+
+/*
+ * unlock after writing
+ */
+static inline void __up_write(struct rw_semaphore *sem)
+{
+	if (unlikely(atomic_long_sub_return(RWSEM_ACTIVE_WRITE_BIAS,
+				 (atomic_long_t *)&sem->count) < 0))
+		rwsem_wake(sem);
+}
+
+/*
+ * implement atomic add functionality
+ */
+static inline void rwsem_atomic_add(long delta, struct rw_semaphore *sem)
+{
+	atomic_long_add(delta, (atomic_long_t *)&sem->count);
+}
+
+/*
+ * downgrade write lock to read lock
+ */
+static inline void __downgrade_write(struct rw_semaphore *sem)
+{
+	long tmp;
+
+	tmp = atomic_long_add_return(-RWSEM_WAITING_BIAS,
+				     (atomic_long_t *)&sem->count);
+	if (tmp < 0)
+		rwsem_downgrade_wake(sem);
+}
+
+/*
+ * implement exchange and add functionality
+ */
+static inline long rwsem_atomic_update(long delta, struct rw_semaphore *sem)
+{
+	return atomic_long_add_return(delta, (atomic_long_t *)&sem->count);
+}
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_POWERPC_RWSEM_H */
diff --git a/include/asm-generic/scatterlist.h b/include/asm-generic/scatterlist.h
new file mode 100644
index 00000000..5de07355
--- /dev/null
+++ b/include/asm-generic/scatterlist.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_GENERIC_SCATTERLIST_H
+#define __ASM_GENERIC_SCATTERLIST_H
+
+#include <linux/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+	unsigned long	sg_magic;
+#endif
+	unsigned long	page_link;
+	unsigned int	offset;
+	unsigned int	length;
+	dma_addr_t	dma_address;
+#ifdef CONFIG_NEED_SG_DMA_LENGTH
+	unsigned int	dma_length;
+#endif
+};
+
+/*
+ * These macros should be used after a dma_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg)	((sg)->dma_address)
+
+#ifdef CONFIG_NEED_SG_DMA_LENGTH
+#define sg_dma_len(sg)		((sg)->dma_length)
+#else
+#define sg_dma_len(sg)		((sg)->length)
+#endif
+
+#endif /* __ASM_GENERIC_SCATTERLIST_H */
diff --git a/include/asm-generic/sections.h b/include/asm-generic/sections.h
new file mode 100644
index 00000000..c1a1216e
--- /dev/null
+++ b/include/asm-generic/sections.h
@@ -0,0 +1,43 @@
+#ifndef _ASM_GENERIC_SECTIONS_H_
+#define _ASM_GENERIC_SECTIONS_H_
+
+/* References to section boundaries */
+
+extern char _text[], _stext[], _etext[];
+extern char _data[], _sdata[], _edata[];
+extern char __bss_start[], __bss_stop[];
+extern char __init_begin[], __init_end[];
+extern char _sinittext[], _einittext[];
+extern char _end[];
+extern char __per_cpu_load[], __per_cpu_start[], __per_cpu_end[];
+extern char __kprobes_text_start[], __kprobes_text_end[];
+extern char __entry_text_start[], __entry_text_end[];
+extern char __initdata_begin[], __initdata_end[];
+extern char __start_rodata[], __end_rodata[];
+
+/* Start and end of .ctors section - used for constructor calls. */
+extern char __ctors_start[], __ctors_end[];
+
+/* function descriptor handling (if any).  Override
+ * in asm/sections.h */
+#ifndef dereference_function_descriptor
+#define dereference_function_descriptor(p) (p)
+#endif
+
+/* random extra sections (if any).  Override
+ * in asm/sections.h */
+#ifndef arch_is_kernel_text
+static inline int arch_is_kernel_text(unsigned long addr)
+{
+	return 0;
+}
+#endif
+
+#ifndef arch_is_kernel_data
+static inline int arch_is_kernel_data(unsigned long addr)
+{
+	return 0;
+}
+#endif
+
+#endif /* _ASM_GENERIC_SECTIONS_H_ */
diff --git a/include/asm-generic/segment.h b/include/asm-generic/segment.h
new file mode 100644
index 00000000..5580eace
--- /dev/null
+++ b/include/asm-generic/segment.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_GENERIC_SEGMENT_H
+#define __ASM_GENERIC_SEGMENT_H
+/*
+ * Only here because we have some old header files that expect it...
+ *
+ * New architectures probably don't want to have their own version.
+ */
+
+#endif /* __ASM_GENERIC_SEGMENT_H */
diff --git a/include/asm-generic/sembuf.h b/include/asm-generic/sembuf.h
new file mode 100644
index 00000000..4cb2c13e
--- /dev/null
+++ b/include/asm-generic/sembuf.h
@@ -0,0 +1,38 @@
+#ifndef __ASM_GENERIC_SEMBUF_H
+#define __ASM_GENERIC_SEMBUF_H
+
+#include <asm/bitsperlong.h>
+
+/*
+ * The semid64_ds structure for x86 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * semid64_ds was originally meant to be architecture specific, but
+ * everyone just ended up making identical copies without specific
+ * optimizations, so we may just as well all use the same one.
+ *
+ * 64 bit architectures typically define a 64 bit __kernel_time_t,
+ * so they do not need the first two padding words.
+ * On big-endian systems, the padding is in the wrong place.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+struct semid64_ds {
+	struct ipc64_perm sem_perm;	/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;	/* last semop time */
+#if __BITS_PER_LONG != 64
+	unsigned long	__unused1;
+#endif
+	__kernel_time_t	sem_ctime;	/* last change time */
+#if __BITS_PER_LONG != 64
+	unsigned long	__unused2;
+#endif
+	unsigned long	sem_nsems;	/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* __ASM_GENERIC_SEMBUF_H */
diff --git a/include/asm-generic/serial.h b/include/asm-generic/serial.h
new file mode 100644
index 00000000..5e291090
--- /dev/null
+++ b/include/asm-generic/serial.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_GENERIC_SERIAL_H
+#define __ASM_GENERIC_SERIAL_H
+
+/*
+ * This should not be an architecture specific #define, oh well.
+ *
+ * Traditionally, it just describes i8250 and related serial ports
+ * that have this clock rate.
+ */
+
+#define BASE_BAUD (1843200 / 16)
+
+#endif /* __ASM_GENERIC_SERIAL_H */
diff --git a/include/asm-generic/setup.h b/include/asm-generic/setup.h
new file mode 100644
index 00000000..6fc26a51
--- /dev/null
+++ b/include/asm-generic/setup.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_GENERIC_SETUP_H
+#define __ASM_GENERIC_SETUP_H
+
+#define COMMAND_LINE_SIZE	512
+
+#endif	/* __ASM_GENERIC_SETUP_H */
diff --git a/include/asm-generic/shmbuf.h b/include/asm-generic/shmbuf.h
new file mode 100644
index 00000000..5768fa60
--- /dev/null
+++ b/include/asm-generic/shmbuf.h
@@ -0,0 +1,59 @@
+#ifndef __ASM_GENERIC_SHMBUF_H
+#define __ASM_GENERIC_SHMBUF_H
+
+#include <asm/bitsperlong.h>
+
+/*
+ * The shmid64_ds structure for x86 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * shmid64_ds was originally meant to be architecture specific, but
+ * everyone just ended up making identical copies without specific
+ * optimizations, so we may just as well all use the same one.
+ *
+ * 64 bit architectures typically define a 64 bit __kernel_time_t,
+ * so they do not need the first two padding words.
+ * On big-endian systems, the padding is in the wrong place.
+ *
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+#if __BITS_PER_LONG != 64
+	unsigned long		__unused1;
+#endif
+	__kernel_time_t		shm_dtime;	/* last detach time */
+#if __BITS_PER_LONG != 64
+	unsigned long		__unused2;
+#endif
+	__kernel_time_t		shm_ctime;	/* last change time */
+#if __BITS_PER_LONG != 64
+	unsigned long		__unused3;
+#endif
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* __ASM_GENERIC_SHMBUF_H */
diff --git a/include/asm-generic/shmparam.h b/include/asm-generic/shmparam.h
new file mode 100644
index 00000000..51a3852d
--- /dev/null
+++ b/include/asm-generic/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_GENERIC_SHMPARAM_H
+#define __ASM_GENERIC_SHMPARAM_H
+
+#define SHMLBA PAGE_SIZE	 /* attach addr a multiple of this */
+
+#endif /* _ASM_GENERIC_SHMPARAM_H */
diff --git a/include/asm-generic/siginfo.h b/include/asm-generic/siginfo.h
new file mode 100644
index 00000000..5e5e3865
--- /dev/null
+++ b/include/asm-generic/siginfo.h
@@ -0,0 +1,310 @@
+#ifndef _ASM_GENERIC_SIGINFO_H
+#define _ASM_GENERIC_SIGINFO_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+typedef union sigval {
+	int sival_int;
+	void __user *sival_ptr;
+} sigval_t;
+
+/*
+ * This is the size (including padding) of the part of the
+ * struct siginfo that is before the union.
+ */
+#ifndef __ARCH_SI_PREAMBLE_SIZE
+#define __ARCH_SI_PREAMBLE_SIZE	(3 * sizeof(int))
+#endif
+
+#define SI_MAX_SIZE	128
+#ifndef SI_PAD_SIZE
+#define SI_PAD_SIZE	((SI_MAX_SIZE - __ARCH_SI_PREAMBLE_SIZE) / sizeof(int))
+#endif
+
+#ifndef __ARCH_SI_UID_T
+#define __ARCH_SI_UID_T	__kernel_uid32_t
+#endif
+
+/*
+ * The default "si_band" type is "long", as specified by POSIX.
+ * However, some architectures want to override this to "int"
+ * for historical compatibility reasons, so we allow that.
+ */
+#ifndef __ARCH_SI_BAND_T
+#define __ARCH_SI_BAND_T long
+#endif
+
+#ifndef __ARCH_SI_CLOCK_T
+#define __ARCH_SI_CLOCK_T __kernel_clock_t
+#endif
+
+#ifndef __ARCH_SI_ATTRIBUTES
+#define __ARCH_SI_ATTRIBUTES
+#endif
+
+#ifndef HAVE_ARCH_SIGINFO_T
+
+typedef struct siginfo {
+	int si_signo;
+	int si_errno;
+	int si_code;
+
+	union {
+		int _pad[SI_PAD_SIZE];
+
+		/* kill() */
+		struct {
+			__kernel_pid_t _pid;	/* sender's pid */
+			__ARCH_SI_UID_T _uid;	/* sender's uid */
+		} _kill;
+
+		/* POSIX.1b timers */
+		struct {
+			__kernel_timer_t _tid;	/* timer id */
+			int _overrun;		/* overrun count */
+			char _pad[sizeof( __ARCH_SI_UID_T) - sizeof(int)];
+			sigval_t _sigval;	/* same as below */
+			int _sys_private;       /* not to be passed to user */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			__kernel_pid_t _pid;	/* sender's pid */
+			__ARCH_SI_UID_T _uid;	/* sender's uid */
+			sigval_t _sigval;
+		} _rt;
+
+		/* SIGCHLD */
+		struct {
+			__kernel_pid_t _pid;	/* which child */
+			__ARCH_SI_UID_T _uid;	/* sender's uid */
+			int _status;		/* exit code */
+			__ARCH_SI_CLOCK_T _utime;
+			__ARCH_SI_CLOCK_T _stime;
+		} _sigchld;
+
+		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+		struct {
+			void __user *_addr; /* faulting insn/memory ref. */
+#ifdef __ARCH_SI_TRAPNO
+			int _trapno;	/* TRAP # which caused the signal */
+#endif
+			short _addr_lsb; /* LSB of the reported address */
+		} _sigfault;
+
+		/* SIGPOLL */
+		struct {
+			__ARCH_SI_BAND_T _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
+			int _fd;
+		} _sigpoll;
+	} _sifields;
+} __ARCH_SI_ATTRIBUTES siginfo_t;
+
+#endif
+
+/*
+ * How these fields are to be accessed.
+ */
+#define si_pid		_sifields._kill._pid
+#define si_uid		_sifields._kill._uid
+#define si_tid		_sifields._timer._tid
+#define si_overrun	_sifields._timer._overrun
+#define si_sys_private  _sifields._timer._sys_private
+#define si_status	_sifields._sigchld._status
+#define si_utime	_sifields._sigchld._utime
+#define si_stime	_sifields._sigchld._stime
+#define si_value	_sifields._rt._sigval
+#define si_int		_sifields._rt._sigval.sival_int
+#define si_ptr		_sifields._rt._sigval.sival_ptr
+#define si_addr		_sifields._sigfault._addr
+#ifdef __ARCH_SI_TRAPNO
+#define si_trapno	_sifields._sigfault._trapno
+#endif
+#define si_addr_lsb	_sifields._sigfault._addr_lsb
+#define si_band		_sifields._sigpoll._band
+#define si_fd		_sifields._sigpoll._fd
+
+#ifdef __KERNEL__
+#define __SI_MASK	0xffff0000u
+#define __SI_KILL	(0 << 16)
+#define __SI_TIMER	(1 << 16)
+#define __SI_POLL	(2 << 16)
+#define __SI_FAULT	(3 << 16)
+#define __SI_CHLD	(4 << 16)
+#define __SI_RT		(5 << 16)
+#define __SI_MESGQ	(6 << 16)
+#define __SI_CODE(T,N)	((T) | ((N) & 0xffff))
+#else
+#define __SI_KILL	0
+#define __SI_TIMER	0
+#define __SI_POLL	0
+#define __SI_FAULT	0
+#define __SI_CHLD	0
+#define __SI_RT		0
+#define __SI_MESGQ	0
+#define __SI_CODE(T,N)	(N)
+#endif
+
+/*
+ * si_code values
+ * Digital reserves positive values for kernel-generated signals.
+ */
+#define SI_USER		0		/* sent by kill, sigsend, raise */
+#define SI_KERNEL	0x80		/* sent by the kernel from somewhere */
+#define SI_QUEUE	-1		/* sent by sigqueue */
+#define SI_TIMER __SI_CODE(__SI_TIMER,-2) /* sent by timer expiration */
+#define SI_MESGQ __SI_CODE(__SI_MESGQ,-3) /* sent by real time mesq state change */
+#define SI_ASYNCIO	-4		/* sent by AIO completion */
+#define SI_SIGIO	-5		/* sent by queued SIGIO */
+#define SI_TKILL	-6		/* sent by tkill system call */
+#define SI_DETHREAD	-7		/* sent by execve() killing subsidiary threads */
+
+#define SI_FROMUSER(siptr)	((siptr)->si_code <= 0)
+#define SI_FROMKERNEL(siptr)	((siptr)->si_code > 0)
+
+/*
+ * SIGILL si_codes
+ */
+#define ILL_ILLOPC	(__SI_FAULT|1)	/* illegal opcode */
+#define ILL_ILLOPN	(__SI_FAULT|2)	/* illegal operand */
+#define ILL_ILLADR	(__SI_FAULT|3)	/* illegal addressing mode */
+#define ILL_ILLTRP	(__SI_FAULT|4)	/* illegal trap */
+#define ILL_PRVOPC	(__SI_FAULT|5)	/* privileged opcode */
+#define ILL_PRVREG	(__SI_FAULT|6)	/* privileged register */
+#define ILL_COPROC	(__SI_FAULT|7)	/* coprocessor error */
+#define ILL_BADSTK	(__SI_FAULT|8)	/* internal stack error */
+#define NSIGILL		8
+
+/*
+ * SIGFPE si_codes
+ */
+#define FPE_INTDIV	(__SI_FAULT|1)	/* integer divide by zero */
+#define FPE_INTOVF	(__SI_FAULT|2)	/* integer overflow */
+#define FPE_FLTDIV	(__SI_FAULT|3)	/* floating point divide by zero */
+#define FPE_FLTOVF	(__SI_FAULT|4)	/* floating point overflow */
+#define FPE_FLTUND	(__SI_FAULT|5)	/* floating point underflow */
+#define FPE_FLTRES	(__SI_FAULT|6)	/* floating point inexact result */
+#define FPE_FLTINV	(__SI_FAULT|7)	/* floating point invalid operation */
+#define FPE_FLTSUB	(__SI_FAULT|8)	/* subscript out of range */
+#define NSIGFPE		8
+
+/*
+ * SIGSEGV si_codes
+ */
+#define SEGV_MAPERR	(__SI_FAULT|1)	/* address not mapped to object */
+#define SEGV_ACCERR	(__SI_FAULT|2)	/* invalid permissions for mapped object */
+#define NSIGSEGV	2
+
+/*
+ * SIGBUS si_codes
+ */
+#define BUS_ADRALN	(__SI_FAULT|1)	/* invalid address alignment */
+#define BUS_ADRERR	(__SI_FAULT|2)	/* non-existent physical address */
+#define BUS_OBJERR	(__SI_FAULT|3)	/* object specific hardware error */
+/* hardware memory error consumed on a machine check: action required */
+#define BUS_MCEERR_AR	(__SI_FAULT|4)
+/* hardware memory error detected in process but not consumed: action optional*/
+#define BUS_MCEERR_AO	(__SI_FAULT|5)
+#define NSIGBUS		5
+
+/*
+ * SIGTRAP si_codes
+ */
+#define TRAP_BRKPT	(__SI_FAULT|1)	/* process breakpoint */
+#define TRAP_TRACE	(__SI_FAULT|2)	/* process trace trap */
+#define TRAP_BRANCH     (__SI_FAULT|3)  /* process taken branch trap */
+#define TRAP_HWBKPT     (__SI_FAULT|4)  /* hardware breakpoint/watchpoint */
+#define NSIGTRAP	4
+
+/*
+ * SIGCHLD si_codes
+ */
+#define CLD_EXITED	(__SI_CHLD|1)	/* child has exited */
+#define CLD_KILLED	(__SI_CHLD|2)	/* child was killed */
+#define CLD_DUMPED	(__SI_CHLD|3)	/* child terminated abnormally */
+#define CLD_TRAPPED	(__SI_CHLD|4)	/* traced child has trapped */
+#define CLD_STOPPED	(__SI_CHLD|5)	/* child has stopped */
+#define CLD_CONTINUED	(__SI_CHLD|6)	/* stopped child has continued */
+#define NSIGCHLD	6
+
+/*
+ * SIGPOLL si_codes
+ */
+#define POLL_IN		(__SI_POLL|1)	/* data input available */
+#define POLL_OUT	(__SI_POLL|2)	/* output buffers available */
+#define POLL_MSG	(__SI_POLL|3)	/* input message available */
+#define POLL_ERR	(__SI_POLL|4)	/* i/o error */
+#define POLL_PRI	(__SI_POLL|5)	/* high priority input available */
+#define POLL_HUP	(__SI_POLL|6)	/* device disconnected */
+#define NSIGPOLL	6
+
+/*
+ * sigevent definitions
+ * 
+ * It seems likely that SIGEV_THREAD will have to be handled from 
+ * userspace, libpthread transmuting it to SIGEV_SIGNAL, which the
+ * thread manager then catches and does the appropriate nonsense.
+ * However, everything is written out here so as to not get lost.
+ */
+#define SIGEV_SIGNAL	0	/* notify via signal */
+#define SIGEV_NONE	1	/* other notification: meaningless */
+#define SIGEV_THREAD	2	/* deliver via thread creation */
+#define SIGEV_THREAD_ID 4	/* deliver to thread */
+
+/*
+ * This works because the alignment is ok on all current architectures
+ * but we leave open this being overridden in the future
+ */
+#ifndef __ARCH_SIGEV_PREAMBLE_SIZE
+#define __ARCH_SIGEV_PREAMBLE_SIZE	(sizeof(int) * 2 + sizeof(sigval_t))
+#endif
+
+#define SIGEV_MAX_SIZE	64
+#define SIGEV_PAD_SIZE	((SIGEV_MAX_SIZE - __ARCH_SIGEV_PREAMBLE_SIZE) \
+		/ sizeof(int))
+
+typedef struct sigevent {
+	sigval_t sigev_value;
+	int sigev_signo;
+	int sigev_notify;
+	union {
+		int _pad[SIGEV_PAD_SIZE];
+		 int _tid;
+
+		struct {
+			void (*_function)(sigval_t);
+			void *_attribute;	/* really pthread_attr_t */
+		} _sigev_thread;
+	} _sigev_un;
+} sigevent_t;
+
+#define sigev_notify_function	_sigev_un._sigev_thread._function
+#define sigev_notify_attributes	_sigev_un._sigev_thread._attribute
+#define sigev_notify_thread_id	 _sigev_un._tid
+
+#ifdef __KERNEL__
+
+struct siginfo;
+void do_schedule_next_timer(struct siginfo *info);
+
+#ifndef HAVE_ARCH_COPY_SIGINFO
+
+#include <linux/string.h>
+
+static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
+{
+	if (from->si_code < 0)
+		memcpy(to, from, sizeof(*to));
+	else
+		/* _sigchld is currently the largest know union member */
+		memcpy(to, from, __ARCH_SI_PREAMBLE_SIZE + sizeof(from->_sifields._sigchld));
+}
+
+#endif
+
+extern int copy_siginfo_to_user(struct siginfo __user *to, struct siginfo *from);
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/asm-generic/signal-defs.h b/include/asm-generic/signal-defs.h
new file mode 100644
index 00000000..00f95df5
--- /dev/null
+++ b/include/asm-generic/signal-defs.h
@@ -0,0 +1,28 @@
+#ifndef __ASM_GENERIC_SIGNAL_DEFS_H
+#define __ASM_GENERIC_SIGNAL_DEFS_H
+
+#include <linux/compiler.h>
+
+#ifndef SIG_BLOCK
+#define SIG_BLOCK          0	/* for blocking signals */
+#endif
+#ifndef SIG_UNBLOCK
+#define SIG_UNBLOCK        1	/* for unblocking signals */
+#endif
+#ifndef SIG_SETMASK
+#define SIG_SETMASK        2	/* for setting the signal mask */
+#endif
+
+#ifndef __ASSEMBLY__
+typedef void __signalfn_t(int);
+typedef __signalfn_t __user *__sighandler_t;
+
+typedef void __restorefn_t(void);
+typedef __restorefn_t __user *__sigrestore_t;
+
+#define SIG_DFL	((__force __sighandler_t)0)	/* default signal handling */
+#define SIG_IGN	((__force __sighandler_t)1)	/* ignore signal */
+#define SIG_ERR	((__force __sighandler_t)-1)	/* error return from signal */
+#endif
+
+#endif /* __ASM_GENERIC_SIGNAL_DEFS_H */
diff --git a/include/asm-generic/signal.h b/include/asm-generic/signal.h
new file mode 100644
index 00000000..555c0aee
--- /dev/null
+++ b/include/asm-generic/signal.h
@@ -0,0 +1,131 @@
+#ifndef __ASM_GENERIC_SIGNAL_H
+#define __ASM_GENERIC_SIGNAL_H
+
+#include <linux/types.h>
+
+#define _NSIG		64
+#define _NSIG_BPW	__BITS_PER_LONG
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#ifndef SIGRTMAX
+#define SIGRTMAX	_NSIG
+#endif
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002
+#define SA_SIGINFO	0x00000004
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+/*
+ * New architectures should not define the obsolete
+ *	SA_RESTORER	0x04000000
+ */
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#ifndef __ASSEMBLY__
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+/* not actually used, but required for linux/syscalls.h */
+typedef unsigned long old_sigset_t;
+
+#include <asm-generic/signal-defs.h>
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+#ifdef SA_RESTORER
+	__sigrestore_t sa_restorer;
+#endif
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+#include <asm/sigcontext.h>
+#undef __HAVE_ARCH_SIG_BITOPS
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_GENERIC_SIGNAL_H */
diff --git a/include/asm-generic/sizes.h b/include/asm-generic/sizes.h
new file mode 100644
index 00000000..ea5d4ef8
--- /dev/null
+++ b/include/asm-generic/sizes.h
@@ -0,0 +1,47 @@
+/*
+ * linux/include/asm-generic/sizes.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_GENERIC_SIZES_H__
+#define __ASM_GENERIC_SIZES_H__
+
+#define SZ_1				0x00000001
+#define SZ_2				0x00000002
+#define SZ_4				0x00000004
+#define SZ_8				0x00000008
+#define SZ_16				0x00000010
+#define SZ_32				0x00000020
+#define SZ_64				0x00000040
+#define SZ_128				0x00000080
+#define SZ_256				0x00000100
+#define SZ_512				0x00000200
+
+#define SZ_1K				0x00000400
+#define SZ_2K				0x00000800
+#define SZ_4K				0x00001000
+#define SZ_8K				0x00002000
+#define SZ_16K				0x00004000
+#define SZ_32K				0x00008000
+#define SZ_64K				0x00010000
+#define SZ_128K				0x00020000
+#define SZ_256K				0x00040000
+#define SZ_512K				0x00080000
+
+#define SZ_1M				0x00100000
+#define SZ_2M				0x00200000
+#define SZ_4M				0x00400000
+#define SZ_8M				0x00800000
+#define SZ_16M				0x01000000
+#define SZ_32M				0x02000000
+#define SZ_64M				0x04000000
+#define SZ_128M				0x08000000
+#define SZ_256M				0x10000000
+#define SZ_512M				0x20000000
+
+#define SZ_1G				0x40000000
+#define SZ_2G				0x80000000
+
+#endif /* __ASM_GENERIC_SIZES_H__ */
diff --git a/include/asm-generic/socket.h b/include/asm-generic/socket.h
new file mode 100644
index 00000000..b1bea032
--- /dev/null
+++ b/include/asm-generic/socket.h
@@ -0,0 +1,75 @@
+#ifndef __ASM_GENERIC_SOCKET_H
+#define __ASM_GENERIC_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_SNDBUFFORCE	32
+#define SO_RCVBUFFORCE	33
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+
+#ifndef SO_PASSCRED /* powerpc only differs in these */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+#endif
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER	26
+#define SO_DETACH_FILTER	27
+
+#define SO_PEERNAME		28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+#define SO_PASSSEC		34
+#define SO_TIMESTAMPNS		35
+#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
+
+#define SO_MARK			36
+
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
+#define SO_PROTOCOL		38
+#define SO_DOMAIN		39
+
+#define SO_RXQ_OVFL             40
+
+#define SO_WIFI_STATUS		41
+#define SCM_WIFI_STATUS	SO_WIFI_STATUS
+#define SO_PEEK_OFF		42
+
+/* Instruct lower device to use last 4-bytes of skb data as FCS */
+#define SO_NOFCS		43
+
+#endif /* __ASM_GENERIC_SOCKET_H */
diff --git a/include/asm-generic/sockios.h b/include/asm-generic/sockios.h
new file mode 100644
index 00000000..9a61a369
--- /dev/null
+++ b/include/asm-generic/sockios.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_GENERIC_SOCKIOS_H
+#define __ASM_GENERIC_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
+#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
+
+#endif /* __ASM_GENERIC_SOCKIOS_H */
diff --git a/include/asm-generic/spinlock.h b/include/asm-generic/spinlock.h
new file mode 100644
index 00000000..1547a03a
--- /dev/null
+++ b/include/asm-generic/spinlock.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_GENERIC_SPINLOCK_H
+#define __ASM_GENERIC_SPINLOCK_H
+/*
+ * You need to implement asm/spinlock.h for SMP support. The generic
+ * version does not handle SMP.
+ */
+#ifdef CONFIG_SMP
+#error need an architecture specific asm/spinlock.h
+#endif
+
+#endif /* __ASM_GENERIC_SPINLOCK_H */
diff --git a/include/asm-generic/stat.h b/include/asm-generic/stat.h
new file mode 100644
index 00000000..bd8cad21
--- /dev/null
+++ b/include/asm-generic/stat.h
@@ -0,0 +1,72 @@
+#ifndef __ASM_GENERIC_STAT_H
+#define __ASM_GENERIC_STAT_H
+
+/*
+ * Everybody gets this wrong and has to stick with it for all
+ * eternity. Hopefully, this version gets used by new architectures
+ * so they don't fall into the same traps.
+ *
+ * stat64 is copied from powerpc64, with explicit padding added.
+ * stat is the same structure layout on 64-bit, without the 'long long'
+ * types.
+ *
+ * By convention, 64 bit architectures use the stat interface, while
+ * 32 bit architectures use the stat64 interface. Note that we don't
+ * provide an __old_kernel_stat here, which new architecture should
+ * not have to start with.
+ */
+
+#include <asm/bitsperlong.h>
+
+#define STAT_HAVE_NSEC 1
+
+struct stat {
+	unsigned long	st_dev;		/* Device.  */
+	unsigned long	st_ino;		/* File serial number.  */
+	unsigned int	st_mode;	/* File mode.  */
+	unsigned int	st_nlink;	/* Link count.  */
+	unsigned int	st_uid;		/* User ID of the file's owner.  */
+	unsigned int	st_gid;		/* Group ID of the file's group. */
+	unsigned long	st_rdev;	/* Device number, if device.  */
+	unsigned long	__pad1;
+	long		st_size;	/* Size of file, in bytes.  */
+	int		st_blksize;	/* Optimal block size for I/O.  */
+	int		__pad2;
+	long		st_blocks;	/* Number 512-byte blocks allocated. */
+	long		st_atime;	/* Time of last access.  */
+	unsigned long	st_atime_nsec;
+	long		st_mtime;	/* Time of last modification.  */
+	unsigned long	st_mtime_nsec;
+	long		st_ctime;	/* Time of last status change.  */
+	unsigned long	st_ctime_nsec;
+	unsigned int	__unused4;
+	unsigned int	__unused5;
+};
+
+/* This matches struct stat64 in glibc2.1. Only used for 32 bit. */
+#if __BITS_PER_LONG != 64 || defined(__ARCH_WANT_STAT64)
+struct stat64 {
+	unsigned long long st_dev;	/* Device.  */
+	unsigned long long st_ino;	/* File serial number.  */
+	unsigned int	st_mode;	/* File mode.  */
+	unsigned int	st_nlink;	/* Link count.  */
+	unsigned int	st_uid;		/* User ID of the file's owner.  */
+	unsigned int	st_gid;		/* Group ID of the file's group. */
+	unsigned long long st_rdev;	/* Device number, if device.  */
+	unsigned long long __pad1;
+	long long	st_size;	/* Size of file, in bytes.  */
+	int		st_blksize;	/* Optimal block size for I/O.  */
+	int		__pad2;
+	long long	st_blocks;	/* Number 512-byte blocks allocated. */
+	int		st_atime;	/* Time of last access.  */
+	unsigned int	st_atime_nsec;
+	int		st_mtime;	/* Time of last modification.  */
+	unsigned int	st_mtime_nsec;
+	int		st_ctime;	/* Time of last status change.  */
+	unsigned int	st_ctime_nsec;
+	unsigned int	__unused4;
+	unsigned int	__unused5;
+};
+#endif
+
+#endif /* __ASM_GENERIC_STAT_H */
diff --git a/include/asm-generic/statfs.h b/include/asm-generic/statfs.h
new file mode 100644
index 00000000..c749af9c
--- /dev/null
+++ b/include/asm-generic/statfs.h
@@ -0,0 +1,86 @@
+#ifndef _GENERIC_STATFS_H
+#define _GENERIC_STATFS_H
+
+#include <linux/types.h>
+
+#ifdef __KERNEL__
+typedef __kernel_fsid_t	fsid_t;
+#endif
+
+/*
+ * Most 64-bit platforms use 'long', while most 32-bit platforms use '__u32'.
+ * Yes, they differ in signedness as well as size.
+ * Special cases can override it for themselves -- except for S390x, which
+ * is just a little too special for us. And MIPS, which I'm not touching
+ * with a 10' pole.
+ */
+#ifndef __statfs_word
+#if __BITS_PER_LONG == 64
+#define __statfs_word long
+#else
+#define __statfs_word __u32
+#endif
+#endif
+
+struct statfs {
+	__statfs_word f_type;
+	__statfs_word f_bsize;
+	__statfs_word f_blocks;
+	__statfs_word f_bfree;
+	__statfs_word f_bavail;
+	__statfs_word f_files;
+	__statfs_word f_ffree;
+	__kernel_fsid_t f_fsid;
+	__statfs_word f_namelen;
+	__statfs_word f_frsize;
+	__statfs_word f_flags;
+	__statfs_word f_spare[4];
+};
+
+/*
+ * ARM needs to avoid the 32-bit padding at the end, for consistency
+ * between EABI and OABI 
+ */
+#ifndef ARCH_PACK_STATFS64
+#define ARCH_PACK_STATFS64
+#endif
+
+struct statfs64 {
+	__statfs_word f_type;
+	__statfs_word f_bsize;
+	__u64 f_blocks;
+	__u64 f_bfree;
+	__u64 f_bavail;
+	__u64 f_files;
+	__u64 f_ffree;
+	__kernel_fsid_t f_fsid;
+	__statfs_word f_namelen;
+	__statfs_word f_frsize;
+	__statfs_word f_flags;
+	__statfs_word f_spare[4];
+} ARCH_PACK_STATFS64;
+
+/* 
+ * IA64 and x86_64 need to avoid the 32-bit padding at the end,
+ * to be compatible with the i386 ABI
+ */
+#ifndef ARCH_PACK_COMPAT_STATFS64
+#define ARCH_PACK_COMPAT_STATFS64
+#endif
+
+struct compat_statfs64 {
+	__u32 f_type;
+	__u32 f_bsize;
+	__u64 f_blocks;
+	__u64 f_bfree;
+	__u64 f_bavail;
+	__u64 f_files;
+	__u64 f_ffree;
+	__kernel_fsid_t f_fsid;
+	__u32 f_namelen;
+	__u32 f_frsize;
+	__u32 f_flags;
+	__u32 f_spare[4];
+} ARCH_PACK_COMPAT_STATFS64;
+
+#endif
diff --git a/include/asm-generic/string.h b/include/asm-generic/string.h
new file mode 100644
index 00000000..de5e0201
--- /dev/null
+++ b/include/asm-generic/string.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_GENERIC_STRING_H
+#define __ASM_GENERIC_STRING_H
+/*
+ * The kernel provides all required functions in lib/string.c
+ *
+ * Architectures probably want to provide at least their own optimized
+ * memcpy and memset functions though.
+ */
+
+#endif /* __ASM_GENERIC_STRING_H */
diff --git a/include/asm-generic/swab.h b/include/asm-generic/swab.h
new file mode 100644
index 00000000..a8e9029d
--- /dev/null
+++ b/include/asm-generic/swab.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_GENERIC_SWAB_H
+#define _ASM_GENERIC_SWAB_H
+
+#include <asm/bitsperlong.h>
+
+/*
+ * 32 bit architectures typically (but not always) want to
+ * set __SWAB_64_THRU_32__. In user space, this is only
+ * valid if the compiler supports 64 bit data types.
+ */
+
+#if __BITS_PER_LONG == 32
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#define __SWAB_64_THRU_32__
+#endif
+#endif
+
+#endif /* _ASM_GENERIC_SWAB_H */
diff --git a/include/asm-generic/switch_to.h b/include/asm-generic/switch_to.h
new file mode 100644
index 00000000..052c4ac0
--- /dev/null
+++ b/include/asm-generic/switch_to.h
@@ -0,0 +1,30 @@
+/* Generic task switch macro wrapper, based on MN10300 definitions.
+ *
+ * It should be possible to use these on really simple architectures,
+ * but it serves more as a starting point for new ports.
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef __ASM_GENERIC_SWITCH_TO_H
+#define __ASM_GENERIC_SWITCH_TO_H
+
+#include <linux/thread_info.h>
+
+/*
+ * Context switching is now performed out-of-line in switch_to.S
+ */
+extern struct task_struct *__switch_to(struct task_struct *,
+				       struct task_struct *);
+
+#define switch_to(prev, next, last)					\
+	do {								\
+		((last) = __switch_to((prev), (next)));			\
+	} while (0)
+
+#endif /* __ASM_GENERIC_SWITCH_TO_H */
diff --git a/include/asm-generic/syscall.h b/include/asm-generic/syscall.h
new file mode 100644
index 00000000..5c122ae6
--- /dev/null
+++ b/include/asm-generic/syscall.h
@@ -0,0 +1,145 @@
+/*
+ * Access to user system call parameters and results
+ *
+ * Copyright (C) 2008-2009 Red Hat, Inc.  All rights reserved.
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License v.2.
+ *
+ * This file is a stub providing documentation for what functions
+ * asm-ARCH/syscall.h files need to define.  Most arch definitions
+ * will be simple inlines.
+ *
+ * All of these functions expect to be called with no locks,
+ * and only when the caller is sure that the task of interest
+ * cannot return to user mode while we are looking at it.
+ */
+
+#ifndef _ASM_SYSCALL_H
+#define _ASM_SYSCALL_H	1
+
+struct task_struct;
+struct pt_regs;
+
+/**
+ * syscall_get_nr - find what system call a task is executing
+ * @task:	task of interest, must be blocked
+ * @regs:	task_pt_regs() of @task
+ *
+ * If @task is executing a system call or is at system call
+ * tracing about to attempt one, returns the system call number.
+ * If @task is not executing a system call, i.e. it's blocked
+ * inside the kernel for a fault or signal, returns -1.
+ *
+ * Note this returns int even on 64-bit machines.  Only 32 bits of
+ * system call number can be meaningful.  If the actual arch value
+ * is 64 bits, this truncates to 32 bits so 0xffffffff means -1.
+ *
+ * It's only valid to call this when @task is known to be blocked.
+ */
+int syscall_get_nr(struct task_struct *task, struct pt_regs *regs);
+
+/**
+ * syscall_rollback - roll back registers after an aborted system call
+ * @task:	task of interest, must be in system call exit tracing
+ * @regs:	task_pt_regs() of @task
+ *
+ * It's only valid to call this when @task is stopped for system
+ * call exit tracing (due to TIF_SYSCALL_TRACE or TIF_SYSCALL_AUDIT),
+ * after tracehook_report_syscall_entry() returned nonzero to prevent
+ * the system call from taking place.
+ *
+ * This rolls back the register state in @regs so it's as if the
+ * system call instruction was a no-op.  The registers containing
+ * the system call number and arguments are as they were before the
+ * system call instruction.  This may not be the same as what the
+ * register state looked like at system call entry tracing.
+ */
+void syscall_rollback(struct task_struct *task, struct pt_regs *regs);
+
+/**
+ * syscall_get_error - check result of traced system call
+ * @task:	task of interest, must be blocked
+ * @regs:	task_pt_regs() of @task
+ *
+ * Returns 0 if the system call succeeded, or -ERRORCODE if it failed.
+ *
+ * It's only valid to call this when @task is stopped for tracing on exit
+ * from a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT.
+ */
+long syscall_get_error(struct task_struct *task, struct pt_regs *regs);
+
+/**
+ * syscall_get_return_value - get the return value of a traced system call
+ * @task:	task of interest, must be blocked
+ * @regs:	task_pt_regs() of @task
+ *
+ * Returns the return value of the successful system call.
+ * This value is meaningless if syscall_get_error() returned nonzero.
+ *
+ * It's only valid to call this when @task is stopped for tracing on exit
+ * from a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT.
+ */
+long syscall_get_return_value(struct task_struct *task, struct pt_regs *regs);
+
+/**
+ * syscall_set_return_value - change the return value of a traced system call
+ * @task:	task of interest, must be blocked
+ * @regs:	task_pt_regs() of @task
+ * @error:	negative error code, or zero to indicate success
+ * @val:	user return value if @error is zero
+ *
+ * This changes the results of the system call that user mode will see.
+ * If @error is zero, the user sees a successful system call with a
+ * return value of @val.  If @error is nonzero, it's a negated errno
+ * code; the user sees a failed system call with this errno code.
+ *
+ * It's only valid to call this when @task is stopped for tracing on exit
+ * from a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT.
+ */
+void syscall_set_return_value(struct task_struct *task, struct pt_regs *regs,
+			      int error, long val);
+
+/**
+ * syscall_get_arguments - extract system call parameter values
+ * @task:	task of interest, must be blocked
+ * @regs:	task_pt_regs() of @task
+ * @i:		argument index [0,5]
+ * @n:		number of arguments; n+i must be [1,6].
+ * @args:	array filled with argument values
+ *
+ * Fetches @n arguments to the system call starting with the @i'th argument
+ * (from 0 through 5).  Argument @i is stored in @args[0], and so on.
+ * An arch inline version is probably optimal when @i and @n are constants.
+ *
+ * It's only valid to call this when @task is stopped for tracing on
+ * entry to a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT.
+ * It's invalid to call this with @i + @n > 6; we only support system calls
+ * taking up to 6 arguments.
+ */
+void syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
+			   unsigned int i, unsigned int n, unsigned long *args);
+
+/**
+ * syscall_set_arguments - change system call parameter value
+ * @task:	task of interest, must be in system call entry tracing
+ * @regs:	task_pt_regs() of @task
+ * @i:		argument index [0,5]
+ * @n:		number of arguments; n+i must be [1,6].
+ * @args:	array of argument values to store
+ *
+ * Changes @n arguments to the system call starting with the @i'th argument.
+ * Argument @i gets value @args[0], and so on.
+ * An arch inline version is probably optimal when @i and @n are constants.
+ *
+ * It's only valid to call this when @task is stopped for tracing on
+ * entry to a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT.
+ * It's invalid to call this with @i + @n > 6; we only support system calls
+ * taking up to 6 arguments.
+ */
+void syscall_set_arguments(struct task_struct *task, struct pt_regs *regs,
+			   unsigned int i, unsigned int n,
+			   const unsigned long *args);
+
+#endif	/* _ASM_SYSCALL_H */
diff --git a/include/asm-generic/syscalls.h b/include/asm-generic/syscalls.h
new file mode 100644
index 00000000..d89dec86
--- /dev/null
+++ b/include/asm-generic/syscalls.h
@@ -0,0 +1,62 @@
+#ifndef __ASM_GENERIC_SYSCALLS_H
+#define __ASM_GENERIC_SYSCALLS_H
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+
+/*
+ * Calling conventions for these system calls can differ, so
+ * it's possible to override them.
+ */
+#ifndef sys_clone
+asmlinkage long sys_clone(unsigned long clone_flags, unsigned long newsp,
+			void __user *parent_tid, void __user *child_tid,
+			struct pt_regs *regs);
+#endif
+
+#ifndef sys_fork
+asmlinkage long sys_fork(struct pt_regs *regs);
+#endif
+
+#ifndef sys_vfork
+asmlinkage long sys_vfork(struct pt_regs *regs);
+#endif
+
+#ifndef sys_execve
+asmlinkage long sys_execve(const char __user *filename,
+			   const char __user *const __user *argv,
+			   const char __user *const __user *envp,
+			   struct pt_regs *regs);
+#endif
+
+#ifndef sys_mmap2
+asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
+			unsigned long prot, unsigned long flags,
+			unsigned long fd, unsigned long pgoff);
+#endif
+
+#ifndef sys_mmap
+asmlinkage long sys_mmap(unsigned long addr, unsigned long len,
+			unsigned long prot, unsigned long flags,
+			unsigned long fd, off_t pgoff);
+#endif
+
+#ifndef sys_sigaltstack
+asmlinkage long sys_sigaltstack(const stack_t __user *, stack_t __user *,
+			struct pt_regs *);
+#endif
+
+#ifndef sys_rt_sigreturn
+asmlinkage long sys_rt_sigreturn(struct pt_regs *regs);
+#endif
+
+#ifndef sys_rt_sigsuspend
+asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize);
+#endif
+
+#ifndef sys_rt_sigaction
+asmlinkage long sys_rt_sigaction(int sig, const struct sigaction __user *act,
+			 struct sigaction __user *oact, size_t sigsetsize);
+#endif
+
+#endif /* __ASM_GENERIC_SYSCALLS_H */
diff --git a/include/asm-generic/termbits.h b/include/asm-generic/termbits.h
new file mode 100644
index 00000000..232b4781
--- /dev/null
+++ b/include/asm-generic/termbits.h
@@ -0,0 +1,199 @@
+#ifndef __ASM_GENERIC_TERMBITS_H
+#define __ASM_GENERIC_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+struct termios2 {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+struct ktermios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define    BOTHER 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000	/* input baud rate */
+#define CMSPAR	  010000000000	/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000	/* flow control */
+
+#define IBSHIFT	  16		/* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+#define EXTPROC	0200000
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* __ASM_GENERIC_TERMBITS_H */
diff --git a/include/asm-generic/termios-base.h b/include/asm-generic/termios-base.h
new file mode 100644
index 00000000..0a769feb
--- /dev/null
+++ b/include/asm-generic/termios-base.h
@@ -0,0 +1,77 @@
+/* termios.h: generic termios/termio user copying/translation
+ */
+
+#ifndef _ASM_GENERIC_TERMIOS_BASE_H
+#define _ASM_GENERIC_TERMIOS_BASE_H
+
+#include <asm/uaccess.h>
+
+#ifndef __ARCH_TERMIO_GETPUT
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+static inline int user_termio_to_kernel_termios(struct ktermios *termios,
+						struct termio __user *termio)
+{
+	unsigned short tmp;
+
+	if (get_user(tmp, &termio->c_iflag) < 0)
+		goto fault;
+	termios->c_iflag = (0xffff0000 & termios->c_iflag) | tmp;
+
+	if (get_user(tmp, &termio->c_oflag) < 0)
+		goto fault;
+	termios->c_oflag = (0xffff0000 & termios->c_oflag) | tmp;
+
+	if (get_user(tmp, &termio->c_cflag) < 0)
+		goto fault;
+	termios->c_cflag = (0xffff0000 & termios->c_cflag) | tmp;
+
+	if (get_user(tmp, &termio->c_lflag) < 0)
+		goto fault;
+	termios->c_lflag = (0xffff0000 & termios->c_lflag) | tmp;
+
+	if (get_user(termios->c_line, &termio->c_line) < 0)
+		goto fault;
+
+	if (copy_from_user(termios->c_cc, termio->c_cc, NCC) != 0)
+		goto fault;
+
+	return 0;
+
+ fault:
+	return -EFAULT;
+}
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+static inline int kernel_termios_to_user_termio(struct termio __user *termio,
+						struct ktermios *termios)
+{
+	if (put_user(termios->c_iflag, &termio->c_iflag) < 0 ||
+	    put_user(termios->c_oflag, &termio->c_oflag) < 0 ||
+	    put_user(termios->c_cflag, &termio->c_cflag) < 0 ||
+	    put_user(termios->c_lflag, &termio->c_lflag) < 0 ||
+	    put_user(termios->c_line,  &termio->c_line) < 0 ||
+	    copy_to_user(termio->c_cc, termios->c_cc, NCC) != 0)
+		return -EFAULT;
+
+	return 0;
+}
+
+#ifndef user_termios_to_kernel_termios
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
+#endif
+
+#ifndef kernel_termios_to_user_termios
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+#endif
+
+#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* __ARCH_TERMIO_GETPUT */
+
+#endif /* _ASM_GENERIC_TERMIOS_BASE_H */
diff --git a/include/asm-generic/termios.h b/include/asm-generic/termios.h
new file mode 100644
index 00000000..d0922adc
--- /dev/null
+++ b/include/asm-generic/termios.h
@@ -0,0 +1,154 @@
+#ifndef _ASM_GENERIC_TERMIOS_H
+#define _ASM_GENERIC_TERMIOS_H
+/*
+ * Most architectures have straight copies of the x86 code, with
+ * varying levels of bug fixes on top. Usually it's a good idea
+ * to use this generic version instead, but be careful to avoid
+ * ABI changes.
+ * New architectures should not provide their own version.
+ */
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+#ifdef __KERNEL__
+
+#include <asm/uaccess.h>
+
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+static inline int user_termio_to_kernel_termios(struct ktermios *termios,
+						const struct termio __user *termio)
+{
+	unsigned short tmp;
+
+	if (get_user(tmp, &termio->c_iflag) < 0)
+		goto fault;
+	termios->c_iflag = (0xffff0000 & termios->c_iflag) | tmp;
+
+	if (get_user(tmp, &termio->c_oflag) < 0)
+		goto fault;
+	termios->c_oflag = (0xffff0000 & termios->c_oflag) | tmp;
+
+	if (get_user(tmp, &termio->c_cflag) < 0)
+		goto fault;
+	termios->c_cflag = (0xffff0000 & termios->c_cflag) | tmp;
+
+	if (get_user(tmp, &termio->c_lflag) < 0)
+		goto fault;
+	termios->c_lflag = (0xffff0000 & termios->c_lflag) | tmp;
+
+	if (get_user(termios->c_line, &termio->c_line) < 0)
+		goto fault;
+
+	if (copy_from_user(termios->c_cc, termio->c_cc, NCC) != 0)
+		goto fault;
+
+	return 0;
+
+ fault:
+	return -EFAULT;
+}
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+static inline int kernel_termios_to_user_termio(struct termio __user *termio,
+						struct ktermios *termios)
+{
+	if (put_user(termios->c_iflag, &termio->c_iflag) < 0 ||
+	    put_user(termios->c_oflag, &termio->c_oflag) < 0 ||
+	    put_user(termios->c_cflag, &termio->c_cflag) < 0 ||
+	    put_user(termios->c_lflag, &termio->c_lflag) < 0 ||
+	    put_user(termios->c_line,  &termio->c_line) < 0 ||
+	    copy_to_user(termio->c_cc, termios->c_cc, NCC) != 0)
+		return -EFAULT;
+
+	return 0;
+}
+
+#ifdef TCGETS2
+static inline int user_termios_to_kernel_termios(struct ktermios *k,
+						 struct termios2 __user *u)
+{
+	return copy_from_user(k, u, sizeof(struct termios2));
+}
+
+static inline int kernel_termios_to_user_termios(struct termios2 __user *u,
+						 struct ktermios *k)
+{
+	return copy_to_user(u, k, sizeof(struct termios2));
+}
+
+static inline int user_termios_to_kernel_termios_1(struct ktermios *k,
+						   struct termios __user *u)
+{
+	return copy_from_user(k, u, sizeof(struct termios));
+}
+
+static inline int kernel_termios_to_user_termios_1(struct termios __user *u,
+						   struct ktermios *k)
+{
+	return copy_to_user(u, k, sizeof(struct termios));
+}
+#else /* TCGETS2 */
+static inline int user_termios_to_kernel_termios(struct ktermios *k,
+						 struct termios __user *u)
+{
+	return copy_from_user(k, u, sizeof(struct termios));
+}
+
+static inline int kernel_termios_to_user_termios(struct termios __user *u,
+						 struct ktermios *k)
+{
+	return copy_to_user(u, k, sizeof(struct termios));
+}
+#endif /* TCGETS2 */
+
+#endif	/* __KERNEL__ */
+
+#endif /* _ASM_GENERIC_TERMIOS_H */
diff --git a/include/asm-generic/timex.h b/include/asm-generic/timex.h
new file mode 100644
index 00000000..b2243cb8
--- /dev/null
+++ b/include/asm-generic/timex.h
@@ -0,0 +1,22 @@
+#ifndef __ASM_GENERIC_TIMEX_H
+#define __ASM_GENERIC_TIMEX_H
+
+/*
+ * If you have a cycle counter, return the value here.
+ */
+typedef unsigned long cycles_t;
+#ifndef get_cycles
+static inline cycles_t get_cycles(void)
+{
+	return 0;
+}
+#endif
+
+/*
+ * Architectures are encouraged to implement read_current_timer
+ * and define this in order to avoid the expensive delay loop
+ * calibration during boot.
+ */
+#undef ARCH_HAS_READ_CURRENT_TIMER
+
+#endif /* __ASM_GENERIC_TIMEX_H */
diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h
new file mode 100644
index 00000000..f96a5b58
--- /dev/null
+++ b/include/asm-generic/tlb.h
@@ -0,0 +1,178 @@
+/* include/asm-generic/tlb.h
+ *
+ *	Generic TLB shootdown code
+ *
+ * Copyright 2001 Red Hat, Inc.
+ * Based on code from mm/memory.c Copyright Linus Torvalds and others.
+ *
+ * Copyright 2011 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_GENERIC__TLB_H
+#define _ASM_GENERIC__TLB_H
+
+#include <linux/swap.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+/*
+ * Semi RCU freeing of the page directories.
+ *
+ * This is needed by some architectures to implement software pagetable walkers.
+ *
+ * gup_fast() and other software pagetable walkers do a lockless page-table
+ * walk and therefore needs some synchronization with the freeing of the page
+ * directories. The chosen means to accomplish that is by disabling IRQs over
+ * the walk.
+ *
+ * Architectures that use IPIs to flush TLBs will then automagically DTRT,
+ * since we unlink the page, flush TLBs, free the page. Since the disabling of
+ * IRQs delays the completion of the TLB flush we can never observe an already
+ * freed page.
+ *
+ * Architectures that do not have this (PPC) need to delay the freeing by some
+ * other means, this is that means.
+ *
+ * What we do is batch the freed directory pages (tables) and RCU free them.
+ * We use the sched RCU variant, as that guarantees that IRQ/preempt disabling
+ * holds off grace periods.
+ *
+ * However, in order to batch these pages we need to allocate storage, this
+ * allocation is deep inside the MM code and can thus easily fail on memory
+ * pressure. To guarantee progress we fall back to single table freeing, see
+ * the implementation of tlb_remove_table_one().
+ *
+ */
+struct mmu_table_batch {
+	struct rcu_head		rcu;
+	unsigned int		nr;
+	void			*tables[0];
+};
+
+#define MAX_TABLE_BATCH		\
+	((PAGE_SIZE - sizeof(struct mmu_table_batch)) / sizeof(void *))
+
+extern void tlb_table_flush(struct mmu_gather *tlb);
+extern void tlb_remove_table(struct mmu_gather *tlb, void *table);
+
+#endif
+
+/*
+ * If we can't allocate a page to make a big batch of page pointers
+ * to work on, then just handle a few from the on-stack structure.
+ */
+#define MMU_GATHER_BUNDLE	8
+
+struct mmu_gather_batch {
+	struct mmu_gather_batch	*next;
+	unsigned int		nr;
+	unsigned int		max;
+	struct page		*pages[0];
+};
+
+#define MAX_GATHER_BATCH	\
+	((PAGE_SIZE - sizeof(struct mmu_gather_batch)) / sizeof(void *))
+
+/* struct mmu_gather is an opaque type used by the mm code for passing around
+ * any data needed by arch specific code for tlb_remove_page.
+ */
+struct mmu_gather {
+	struct mm_struct	*mm;
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+	struct mmu_table_batch	*batch;
+#endif
+	unsigned int		need_flush : 1,	/* Did free PTEs */
+				fast_mode  : 1; /* No batching   */
+
+	unsigned int		fullmm;
+
+	struct mmu_gather_batch *active;
+	struct mmu_gather_batch	local;
+	struct page		*__pages[MMU_GATHER_BUNDLE];
+};
+
+#define HAVE_GENERIC_MMU_GATHER
+
+static inline int tlb_fast_mode(struct mmu_gather *tlb)
+{
+#ifdef CONFIG_SMP
+	return tlb->fast_mode;
+#else
+	/*
+	 * For UP we don't need to worry about TLB flush
+	 * and page free order so much..
+	 */
+	return 1;
+#endif
+}
+
+void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, bool fullmm);
+void tlb_flush_mmu(struct mmu_gather *tlb);
+void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end);
+int __tlb_remove_page(struct mmu_gather *tlb, struct page *page);
+
+/* tlb_remove_page
+ *	Similar to __tlb_remove_page but will call tlb_flush_mmu() itself when
+ *	required.
+ */
+static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
+{
+	if (!__tlb_remove_page(tlb, page))
+		tlb_flush_mmu(tlb);
+}
+
+/**
+ * tlb_remove_tlb_entry - remember a pte unmapping for later tlb invalidation.
+ *
+ * Record the fact that pte's were really umapped in ->need_flush, so we can
+ * later optimise away the tlb invalidate.   This helps when userspace is
+ * unmapping already-unmapped pages, which happens quite a lot.
+ */
+#define tlb_remove_tlb_entry(tlb, ptep, address)		\
+	do {							\
+		tlb->need_flush = 1;				\
+		__tlb_remove_tlb_entry(tlb, ptep, address);	\
+	} while (0)
+
+/**
+ * tlb_remove_pmd_tlb_entry - remember a pmd mapping for later tlb invalidation
+ * This is a nop so far, because only x86 needs it.
+ */
+#ifndef __tlb_remove_pmd_tlb_entry
+#define __tlb_remove_pmd_tlb_entry(tlb, pmdp, address) do {} while (0)
+#endif
+
+#define tlb_remove_pmd_tlb_entry(tlb, pmdp, address)		\
+	do {							\
+		tlb->need_flush = 1;				\
+		__tlb_remove_pmd_tlb_entry(tlb, pmdp, address);	\
+	} while (0)
+
+#define pte_free_tlb(tlb, ptep, address)			\
+	do {							\
+		tlb->need_flush = 1;				\
+		__pte_free_tlb(tlb, ptep, address);		\
+	} while (0)
+
+#ifndef __ARCH_HAS_4LEVEL_HACK
+#define pud_free_tlb(tlb, pudp, address)			\
+	do {							\
+		tlb->need_flush = 1;				\
+		__pud_free_tlb(tlb, pudp, address);		\
+	} while (0)
+#endif
+
+#define pmd_free_tlb(tlb, pmdp, address)			\
+	do {							\
+		tlb->need_flush = 1;				\
+		__pmd_free_tlb(tlb, pmdp, address);		\
+	} while (0)
+
+#define tlb_migrate_finish(mm) do {} while (0)
+
+#endif /* _ASM_GENERIC__TLB_H */
diff --git a/include/asm-generic/tlbflush.h b/include/asm-generic/tlbflush.h
new file mode 100644
index 00000000..d6d0a884
--- /dev/null
+++ b/include/asm-generic/tlbflush.h
@@ -0,0 +1,20 @@
+#ifndef __ASM_GENERIC_TLBFLUSH_H
+#define __ASM_GENERIC_TLBFLUSH_H
+/*
+ * This is a dummy tlbflush implementation that can be used on all
+ * nommu architectures.
+ * If you have an MMU, you need to write your own functions.
+ */
+#ifdef CONFIG_MMU
+#error need to implement an architecture specific asm/tlbflush.h
+#endif
+
+#include <linux/bug.h>
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+	BUG();
+}
+
+
+#endif /* __ASM_GENERIC_TLBFLUSH_H */
diff --git a/include/asm-generic/topology.h b/include/asm-generic/topology.h
new file mode 100644
index 00000000..fc824e28
--- /dev/null
+++ b/include/asm-generic/topology.h
@@ -0,0 +1,76 @@
+/*
+ * linux/include/asm-generic/topology.h
+ *
+ * Written by: Matthew Dobson, IBM Corporation
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <colpatch@us.ibm.com>
+ */
+#ifndef _ASM_GENERIC_TOPOLOGY_H
+#define _ASM_GENERIC_TOPOLOGY_H
+
+#ifndef	CONFIG_NUMA
+
+/* Other architectures wishing to use this simple topology API should fill
+   in the below functions as appropriate in their own <asm/topology.h> file. */
+#ifndef cpu_to_node
+#define cpu_to_node(cpu)	((void)(cpu),0)
+#endif
+#ifndef set_numa_node
+#define set_numa_node(node)
+#endif
+#ifndef set_cpu_numa_node
+#define set_cpu_numa_node(cpu, node)
+#endif
+#ifndef cpu_to_mem
+#define cpu_to_mem(cpu)		((void)(cpu),0)
+#endif
+
+#ifndef parent_node
+#define parent_node(node)	((void)(node),0)
+#endif
+#ifndef cpumask_of_node
+#define cpumask_of_node(node)	((void)node, cpu_online_mask)
+#endif
+#ifndef pcibus_to_node
+#define pcibus_to_node(bus)	((void)(bus), -1)
+#endif
+
+#ifndef cpumask_of_pcibus
+#define cpumask_of_pcibus(bus)	(pcibus_to_node(bus) == -1 ?		\
+				 cpu_all_mask :				\
+				 cpumask_of_node(pcibus_to_node(bus)))
+#endif
+
+#endif	/* CONFIG_NUMA */
+
+#if !defined(CONFIG_NUMA) || !defined(CONFIG_HAVE_MEMORYLESS_NODES)
+
+#ifndef set_numa_mem
+#define set_numa_mem(node)
+#endif
+#ifndef set_cpu_numa_mem
+#define set_cpu_numa_mem(cpu, node)
+#endif
+
+#endif	/* !CONFIG_NUMA || !CONFIG_HAVE_MEMORYLESS_NODES */
+
+#endif /* _ASM_GENERIC_TOPOLOGY_H */
diff --git a/include/asm-generic/types.h b/include/asm-generic/types.h
new file mode 100644
index 00000000..bd398060
--- /dev/null
+++ b/include/asm-generic/types.h
@@ -0,0 +1,9 @@
+#ifndef _ASM_GENERIC_TYPES_H
+#define _ASM_GENERIC_TYPES_H
+/*
+ * int-ll64 is used practically everywhere now,
+ * so use it as a reasonable default.
+ */
+#include <asm-generic/int-ll64.h>
+
+#endif /* _ASM_GENERIC_TYPES_H */
diff --git a/include/asm-generic/uaccess-unaligned.h b/include/asm-generic/uaccess-unaligned.h
new file mode 100644
index 00000000..67deb898
--- /dev/null
+++ b/include/asm-generic/uaccess-unaligned.h
@@ -0,0 +1,26 @@
+#ifndef __ASM_GENERIC_UACCESS_UNALIGNED_H
+#define __ASM_GENERIC_UACCESS_UNALIGNED_H
+
+/*
+ * This macro should be used instead of __get_user() when accessing
+ * values at locations that are not known to be aligned.
+ */
+#define __get_user_unaligned(x, ptr)					\
+({									\
+	__typeof__ (*(ptr)) __x;					\
+	__copy_from_user(&__x, (ptr), sizeof(*(ptr))) ? -EFAULT : 0;	\
+	(x) = __x;							\
+})
+
+
+/*
+ * This macro should be used instead of __put_user() when accessing
+ * values at locations that are not known to be aligned.
+ */
+#define __put_user_unaligned(x, ptr)					\
+({									\
+	__typeof__ (*(ptr)) __x = (x);					\
+	__copy_to_user((ptr), &__x, sizeof(*(ptr))) ? -EFAULT : 0;	\
+})
+
+#endif /* __ASM_GENERIC_UACCESS_UNALIGNED_H */
diff --git a/include/asm-generic/uaccess.h b/include/asm-generic/uaccess.h
new file mode 100644
index 00000000..9788568f
--- /dev/null
+++ b/include/asm-generic/uaccess.h
@@ -0,0 +1,334 @@
+#ifndef __ASM_GENERIC_UACCESS_H
+#define __ASM_GENERIC_UACCESS_H
+
+/*
+ * User space memory access functions, these should work
+ * on a ny machine that has kernel and user data in the same
+ * address space, e.g. all NOMMU machines.
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+
+#include <asm/segment.h>
+
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+
+#ifndef KERNEL_DS
+#define KERNEL_DS	MAKE_MM_SEG(~0UL)
+#endif
+
+#ifndef USER_DS
+#define USER_DS		MAKE_MM_SEG(TASK_SIZE - 1)
+#endif
+
+#ifndef get_fs
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current_thread_info()->addr_limit)
+
+static inline void set_fs(mm_segment_t fs)
+{
+	current_thread_info()->addr_limit = fs;
+}
+#endif
+
+#define segment_eq(a, b) ((a).seg == (b).seg)
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+#define access_ok(type, addr, size) __access_ok((unsigned long)(addr),(size))
+
+/*
+ * The architecture should really override this if possible, at least
+ * doing a check on the get_fs()
+ */
+#ifndef __access_ok
+static inline int __access_ok(unsigned long addr, unsigned long size)
+{
+	return 1;
+}
+#endif
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern unsigned long search_exception_table(unsigned long);
+
+/*
+ * architectures with an MMU should override these two
+ */
+#ifndef __copy_from_user
+static inline __must_check long __copy_from_user(void *to,
+		const void __user * from, unsigned long n)
+{
+	if (__builtin_constant_p(n)) {
+		switch(n) {
+		case 1:
+			*(u8 *)to = *(u8 __force *)from;
+			return 0;
+		case 2:
+			*(u16 *)to = *(u16 __force *)from;
+			return 0;
+		case 4:
+			*(u32 *)to = *(u32 __force *)from;
+			return 0;
+#ifdef CONFIG_64BIT
+		case 8:
+			*(u64 *)to = *(u64 __force *)from;
+			return 0;
+#endif
+		default:
+			break;
+		}
+	}
+
+	memcpy(to, (const void __force *)from, n);
+	return 0;
+}
+#endif
+
+#ifndef __copy_to_user
+static inline __must_check long __copy_to_user(void __user *to,
+		const void *from, unsigned long n)
+{
+	if (__builtin_constant_p(n)) {
+		switch(n) {
+		case 1:
+			*(u8 __force *)to = *(u8 *)from;
+			return 0;
+		case 2:
+			*(u16 __force *)to = *(u16 *)from;
+			return 0;
+		case 4:
+			*(u32 __force *)to = *(u32 *)from;
+			return 0;
+#ifdef CONFIG_64BIT
+		case 8:
+			*(u64 __force *)to = *(u64 *)from;
+			return 0;
+#endif
+		default:
+			break;
+		}
+	}
+
+	memcpy((void __force *)to, from, n);
+	return 0;
+}
+#endif
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ * This version just falls back to copy_{from,to}_user, which should
+ * provide a fast-path for small values.
+ */
+#define __put_user(x, ptr) \
+({								\
+	__typeof__(*(ptr)) __x = (x);				\
+	int __pu_err = -EFAULT;					\
+        __chk_user_ptr(ptr);                                    \
+	switch (sizeof (*(ptr))) {				\
+	case 1:							\
+	case 2:							\
+	case 4:							\
+	case 8:							\
+		__pu_err = __put_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		break;						\
+	default:						\
+		__put_user_bad();				\
+		break;						\
+	 }							\
+	__pu_err;						\
+})
+
+#define put_user(x, ptr)					\
+({								\
+	might_sleep();						\
+	access_ok(VERIFY_WRITE, ptr, sizeof(*ptr)) ?		\
+		__put_user(x, ptr) :				\
+		-EFAULT;					\
+})
+
+static inline int __put_user_fn(size_t size, void __user *ptr, void *x)
+{
+	size = __copy_to_user(ptr, x, size);
+	return size ? -EFAULT : size;
+}
+
+extern int __put_user_bad(void) __attribute__((noreturn));
+
+#define __get_user(x, ptr)					\
+({								\
+	int __gu_err = -EFAULT;					\
+	__chk_user_ptr(ptr);					\
+	switch (sizeof(*(ptr))) {				\
+	case 1: {						\
+		unsigned char __x;				\
+		__gu_err = __get_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
+		break;						\
+	};							\
+	case 2: {						\
+		unsigned short __x;				\
+		__gu_err = __get_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
+		break;						\
+	};							\
+	case 4: {						\
+		unsigned int __x;				\
+		__gu_err = __get_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
+		break;						\
+	};							\
+	case 8: {						\
+		unsigned long long __x;				\
+		__gu_err = __get_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
+		break;						\
+	};							\
+	default:						\
+		__get_user_bad();				\
+		break;						\
+	}							\
+	__gu_err;						\
+})
+
+#define get_user(x, ptr)					\
+({								\
+	might_sleep();						\
+	access_ok(VERIFY_READ, ptr, sizeof(*ptr)) ?		\
+		__get_user(x, ptr) :				\
+		-EFAULT;					\
+})
+
+static inline int __get_user_fn(size_t size, const void __user *ptr, void *x)
+{
+	size = __copy_from_user(x, ptr, size);
+	return size ? -EFAULT : size;
+}
+
+extern int __get_user_bad(void) __attribute__((noreturn));
+
+#ifndef __copy_from_user_inatomic
+#define __copy_from_user_inatomic __copy_from_user
+#endif
+
+#ifndef __copy_to_user_inatomic
+#define __copy_to_user_inatomic __copy_to_user
+#endif
+
+static inline long copy_from_user(void *to,
+		const void __user * from, unsigned long n)
+{
+	might_sleep();
+	if (access_ok(VERIFY_READ, from, n))
+		return __copy_from_user(to, from, n);
+	else
+		return n;
+}
+
+static inline long copy_to_user(void __user *to,
+		const void *from, unsigned long n)
+{
+	might_sleep();
+	if (access_ok(VERIFY_WRITE, to, n))
+		return __copy_to_user(to, from, n);
+	else
+		return n;
+}
+
+/*
+ * Copy a null terminated string from userspace.
+ */
+#ifndef __strncpy_from_user
+static inline long
+__strncpy_from_user(char *dst, const char __user *src, long count)
+{
+	char *tmp;
+	strncpy(dst, (const char __force *)src, count);
+	for (tmp = dst; *tmp && count > 0; tmp++, count--)
+		;
+	return (tmp - dst);
+}
+#endif
+
+static inline long
+strncpy_from_user(char *dst, const char __user *src, long count)
+{
+	if (!access_ok(VERIFY_READ, src, 1))
+		return -EFAULT;
+	return __strncpy_from_user(dst, src, count);
+}
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 on exception, a value greater than N if too long
+ */
+#ifndef __strnlen_user
+#define __strnlen_user(s, n) (strnlen((s), (n)) + 1)
+#endif
+
+/*
+ * Unlike strnlen, strnlen_user includes the nul terminator in
+ * its returned count. Callers should check for a returned value
+ * greater than N as an indication the string is too long.
+ */
+static inline long strnlen_user(const char __user *src, long n)
+{
+	if (!access_ok(VERIFY_READ, src, 1))
+		return 0;
+	return __strnlen_user(src, n);
+}
+
+static inline long strlen_user(const char __user *src)
+{
+	return strnlen_user(src, 32767);
+}
+
+/*
+ * Zero Userspace
+ */
+#ifndef __clear_user
+static inline __must_check unsigned long
+__clear_user(void __user *to, unsigned long n)
+{
+	memset((void __force *)to, 0, n);
+	return 0;
+}
+#endif
+
+static inline __must_check unsigned long
+clear_user(void __user *to, unsigned long n)
+{
+	might_sleep();
+	if (!access_ok(VERIFY_WRITE, to, n))
+		return n;
+
+	return __clear_user(to, n);
+}
+
+#endif /* __ASM_GENERIC_UACCESS_H */
diff --git a/include/asm-generic/ucontext.h b/include/asm-generic/ucontext.h
new file mode 100644
index 00000000..ad77343e
--- /dev/null
+++ b/include/asm-generic/ucontext.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_GENERIC_UCONTEXT_H
+#define __ASM_GENERIC_UCONTEXT_H
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* __ASM_GENERIC_UCONTEXT_H */
diff --git a/include/asm-generic/unaligned.h b/include/asm-generic/unaligned.h
new file mode 100644
index 00000000..03cf5936
--- /dev/null
+++ b/include/asm-generic/unaligned.h
@@ -0,0 +1,30 @@
+#ifndef __ASM_GENERIC_UNALIGNED_H
+#define __ASM_GENERIC_UNALIGNED_H
+
+/*
+ * This is the most generic implementation of unaligned accesses
+ * and should work almost anywhere.
+ *
+ * If an architecture can handle unaligned accesses in hardware,
+ * it may want to use the linux/unaligned/access_ok.h implementation
+ * instead.
+ */
+#include <asm/byteorder.h>
+
+#if defined(__LITTLE_ENDIAN)
+# include <linux/unaligned/le_struct.h>
+# include <linux/unaligned/be_byteshift.h>
+# include <linux/unaligned/generic.h>
+# define get_unaligned	__get_unaligned_le
+# define put_unaligned	__put_unaligned_le
+#elif defined(__BIG_ENDIAN)
+# include <linux/unaligned/be_struct.h>
+# include <linux/unaligned/le_byteshift.h>
+# include <linux/unaligned/generic.h>
+# define get_unaligned	__get_unaligned_be
+# define put_unaligned	__put_unaligned_be
+#else
+# error need to define endianess
+#endif
+
+#endif /* __ASM_GENERIC_UNALIGNED_H */
diff --git a/include/asm-generic/unistd.h b/include/asm-generic/unistd.h
new file mode 100644
index 00000000..991ef01c
--- /dev/null
+++ b/include/asm-generic/unistd.h
@@ -0,0 +1,931 @@
+#if !defined(_ASM_GENERIC_UNISTD_H) || defined(__SYSCALL)
+#define _ASM_GENERIC_UNISTD_H
+
+#include <asm/bitsperlong.h>
+
+/*
+ * This file contains the system call numbers, based on the
+ * layout of the x86-64 architecture, which embeds the
+ * pointer to the syscall in the table.
+ *
+ * As a basic principle, no duplication of functionality
+ * should be added, e.g. we don't use lseek when llseek
+ * is present. New architectures should use this file
+ * and implement the less feature-full calls in user space.
+ */
+
+#ifndef __SYSCALL
+#define __SYSCALL(x, y)
+#endif
+
+#if __BITS_PER_LONG == 32 || defined(__SYSCALL_COMPAT)
+#define __SC_3264(_nr, _32, _64) __SYSCALL(_nr, _32)
+#else
+#define __SC_3264(_nr, _32, _64) __SYSCALL(_nr, _64)
+#endif
+
+#ifdef __SYSCALL_COMPAT
+#define __SC_COMP(_nr, _sys, _comp) __SYSCALL(_nr, _comp)
+#define __SC_COMP_3264(_nr, _32, _64, _comp) __SYSCALL(_nr, _comp)
+#else
+#define __SC_COMP(_nr, _sys, _comp) __SYSCALL(_nr, _sys)
+#define __SC_COMP_3264(_nr, _32, _64, _comp) __SC_3264(_nr, _32, _64)
+#endif
+
+#define __NR_io_setup 0
+__SC_COMP(__NR_io_setup, sys_io_setup, compat_sys_io_setup)
+#define __NR_io_destroy 1
+__SYSCALL(__NR_io_destroy, sys_io_destroy)
+#define __NR_io_submit 2
+__SC_COMP(__NR_io_submit, sys_io_submit, compat_sys_io_submit)
+#define __NR_io_cancel 3
+__SYSCALL(__NR_io_cancel, sys_io_cancel)
+#define __NR_io_getevents 4
+__SC_COMP(__NR_io_getevents, sys_io_getevents, compat_sys_io_getevents)
+
+/* fs/xattr.c */
+#define __NR_setxattr 5
+__SYSCALL(__NR_setxattr, sys_setxattr)
+#define __NR_lsetxattr 6
+__SYSCALL(__NR_lsetxattr, sys_lsetxattr)
+#define __NR_fsetxattr 7
+__SYSCALL(__NR_fsetxattr, sys_fsetxattr)
+#define __NR_getxattr 8
+__SYSCALL(__NR_getxattr, sys_getxattr)
+#define __NR_lgetxattr 9
+__SYSCALL(__NR_lgetxattr, sys_lgetxattr)
+#define __NR_fgetxattr 10
+__SYSCALL(__NR_fgetxattr, sys_fgetxattr)
+#define __NR_listxattr 11
+__SYSCALL(__NR_listxattr, sys_listxattr)
+#define __NR_llistxattr 12
+__SYSCALL(__NR_llistxattr, sys_llistxattr)
+#define __NR_flistxattr 13
+__SYSCALL(__NR_flistxattr, sys_flistxattr)
+#define __NR_removexattr 14
+__SYSCALL(__NR_removexattr, sys_removexattr)
+#define __NR_lremovexattr 15
+__SYSCALL(__NR_lremovexattr, sys_lremovexattr)
+#define __NR_fremovexattr 16
+__SYSCALL(__NR_fremovexattr, sys_fremovexattr)
+
+/* fs/dcache.c */
+#define __NR_getcwd 17
+__SYSCALL(__NR_getcwd, sys_getcwd)
+
+/* fs/cookies.c */
+#define __NR_lookup_dcookie 18
+__SC_COMP(__NR_lookup_dcookie, sys_lookup_dcookie, compat_sys_lookup_dcookie)
+
+/* fs/eventfd.c */
+#define __NR_eventfd2 19
+__SYSCALL(__NR_eventfd2, sys_eventfd2)
+
+/* fs/eventpoll.c */
+#define __NR_epoll_create1 20
+__SYSCALL(__NR_epoll_create1, sys_epoll_create1)
+#define __NR_epoll_ctl 21
+__SYSCALL(__NR_epoll_ctl, sys_epoll_ctl)
+#define __NR_epoll_pwait 22
+__SC_COMP(__NR_epoll_pwait, sys_epoll_pwait, compat_sys_epoll_pwait)
+
+/* fs/fcntl.c */
+#define __NR_dup 23
+__SYSCALL(__NR_dup, sys_dup)
+#define __NR_dup3 24
+__SYSCALL(__NR_dup3, sys_dup3)
+#define __NR3264_fcntl 25
+__SC_COMP_3264(__NR3264_fcntl, sys_fcntl64, sys_fcntl, compat_sys_fcntl64)
+
+/* fs/inotify_user.c */
+#define __NR_inotify_init1 26
+__SYSCALL(__NR_inotify_init1, sys_inotify_init1)
+#define __NR_inotify_add_watch 27
+__SYSCALL(__NR_inotify_add_watch, sys_inotify_add_watch)
+#define __NR_inotify_rm_watch 28
+__SYSCALL(__NR_inotify_rm_watch, sys_inotify_rm_watch)
+
+/* fs/ioctl.c */
+#define __NR_ioctl 29
+__SC_COMP(__NR_ioctl, sys_ioctl, compat_sys_ioctl)
+
+/* fs/ioprio.c */
+#define __NR_ioprio_set 30
+__SYSCALL(__NR_ioprio_set, sys_ioprio_set)
+#define __NR_ioprio_get 31
+__SYSCALL(__NR_ioprio_get, sys_ioprio_get)
+
+/* fs/locks.c */
+#define __NR_flock 32
+__SYSCALL(__NR_flock, sys_flock)
+
+/* fs/namei.c */
+#define __NR_mknodat 33
+__SYSCALL(__NR_mknodat, sys_mknodat)
+#define __NR_mkdirat 34
+__SYSCALL(__NR_mkdirat, sys_mkdirat)
+#define __NR_unlinkat 35
+__SYSCALL(__NR_unlinkat, sys_unlinkat)
+#define __NR_symlinkat 36
+__SYSCALL(__NR_symlinkat, sys_symlinkat)
+#define __NR_linkat 37
+__SYSCALL(__NR_linkat, sys_linkat)
+#define __NR_renameat 38
+__SYSCALL(__NR_renameat, sys_renameat)
+
+/* fs/namespace.c */
+#define __NR_umount2 39
+__SYSCALL(__NR_umount2, sys_umount)
+#define __NR_mount 40
+__SC_COMP(__NR_mount, sys_mount, compat_sys_mount)
+#define __NR_pivot_root 41
+__SYSCALL(__NR_pivot_root, sys_pivot_root)
+
+/* fs/nfsctl.c */
+#define __NR_nfsservctl 42
+__SYSCALL(__NR_nfsservctl, sys_ni_syscall)
+
+/* fs/open.c */
+#define __NR3264_statfs 43
+__SC_COMP_3264(__NR3264_statfs, sys_statfs64, sys_statfs, \
+	       compat_sys_statfs64)
+#define __NR3264_fstatfs 44
+__SC_COMP_3264(__NR3264_fstatfs, sys_fstatfs64, sys_fstatfs, \
+	       compat_sys_fstatfs64)
+#define __NR3264_truncate 45
+__SC_COMP_3264(__NR3264_truncate, sys_truncate64, sys_truncate, \
+	       compat_sys_truncate64)
+#define __NR3264_ftruncate 46
+__SC_COMP_3264(__NR3264_ftruncate, sys_ftruncate64, sys_ftruncate, \
+	       compat_sys_ftruncate64)
+
+#define __NR_fallocate 47
+__SC_COMP(__NR_fallocate, sys_fallocate, compat_sys_fallocate)
+#define __NR_faccessat 48
+__SYSCALL(__NR_faccessat, sys_faccessat)
+#define __NR_chdir 49
+__SYSCALL(__NR_chdir, sys_chdir)
+#define __NR_fchdir 50
+__SYSCALL(__NR_fchdir, sys_fchdir)
+#define __NR_chroot 51
+__SYSCALL(__NR_chroot, sys_chroot)
+#define __NR_fchmod 52
+__SYSCALL(__NR_fchmod, sys_fchmod)
+#define __NR_fchmodat 53
+__SYSCALL(__NR_fchmodat, sys_fchmodat)
+#define __NR_fchownat 54
+__SYSCALL(__NR_fchownat, sys_fchownat)
+#define __NR_fchown 55
+__SYSCALL(__NR_fchown, sys_fchown)
+#define __NR_openat 56
+__SC_COMP(__NR_openat, sys_openat, compat_sys_openat)
+#define __NR_close 57
+__SYSCALL(__NR_close, sys_close)
+#define __NR_vhangup 58
+__SYSCALL(__NR_vhangup, sys_vhangup)
+
+/* fs/pipe.c */
+#define __NR_pipe2 59
+__SYSCALL(__NR_pipe2, sys_pipe2)
+
+/* fs/quota.c */
+#define __NR_quotactl 60
+__SYSCALL(__NR_quotactl, sys_quotactl)
+
+/* fs/readdir.c */
+#define __NR_getdents64 61
+__SC_COMP(__NR_getdents64, sys_getdents64, compat_sys_getdents64)
+
+/* fs/read_write.c */
+#define __NR3264_lseek 62
+__SC_3264(__NR3264_lseek, sys_llseek, sys_lseek)
+#define __NR_read 63
+__SYSCALL(__NR_read, sys_read)
+#define __NR_write 64
+__SYSCALL(__NR_write, sys_write)
+#define __NR_readv 65
+__SC_COMP(__NR_readv, sys_readv, compat_sys_readv)
+#define __NR_writev 66
+__SC_COMP(__NR_writev, sys_writev, compat_sys_writev)
+#define __NR_pread64 67
+__SC_COMP(__NR_pread64, sys_pread64, compat_sys_pread64)
+#define __NR_pwrite64 68
+__SC_COMP(__NR_pwrite64, sys_pwrite64, compat_sys_pwrite64)
+#define __NR_preadv 69
+__SC_COMP(__NR_preadv, sys_preadv, compat_sys_preadv)
+#define __NR_pwritev 70
+__SC_COMP(__NR_pwritev, sys_pwritev, compat_sys_pwritev)
+
+/* fs/sendfile.c */
+#define __NR3264_sendfile 71
+__SYSCALL(__NR3264_sendfile, sys_sendfile64)
+
+/* fs/select.c */
+#define __NR_pselect6 72
+__SC_COMP(__NR_pselect6, sys_pselect6, compat_sys_pselect6)
+#define __NR_ppoll 73
+__SC_COMP(__NR_ppoll, sys_ppoll, compat_sys_ppoll)
+
+/* fs/signalfd.c */
+#define __NR_signalfd4 74
+__SC_COMP(__NR_signalfd4, sys_signalfd4, compat_sys_signalfd4)
+
+/* fs/splice.c */
+#define __NR_vmsplice 75
+__SC_COMP(__NR_vmsplice, sys_vmsplice, compat_sys_vmsplice)
+#define __NR_splice 76
+__SYSCALL(__NR_splice, sys_splice)
+#define __NR_tee 77
+__SYSCALL(__NR_tee, sys_tee)
+
+/* fs/stat.c */
+#define __NR_readlinkat 78
+__SYSCALL(__NR_readlinkat, sys_readlinkat)
+#define __NR3264_fstatat 79
+__SC_3264(__NR3264_fstatat, sys_fstatat64, sys_newfstatat)
+#define __NR3264_fstat 80
+__SC_3264(__NR3264_fstat, sys_fstat64, sys_newfstat)
+
+/* fs/sync.c */
+#define __NR_sync 81
+__SYSCALL(__NR_sync, sys_sync)
+#define __NR_fsync 82
+__SYSCALL(__NR_fsync, sys_fsync)
+#define __NR_fdatasync 83
+__SYSCALL(__NR_fdatasync, sys_fdatasync)
+#ifdef __ARCH_WANT_SYNC_FILE_RANGE2
+#define __NR_sync_file_range2 84
+__SC_COMP(__NR_sync_file_range2, sys_sync_file_range2, \
+	  compat_sys_sync_file_range2)
+#else
+#define __NR_sync_file_range 84
+__SC_COMP(__NR_sync_file_range, sys_sync_file_range, \
+	  compat_sys_sync_file_range)
+#endif
+
+/* fs/timerfd.c */
+#define __NR_timerfd_create 85
+__SYSCALL(__NR_timerfd_create, sys_timerfd_create)
+#define __NR_timerfd_settime 86
+__SC_COMP(__NR_timerfd_settime, sys_timerfd_settime, \
+	  compat_sys_timerfd_settime)
+#define __NR_timerfd_gettime 87
+__SC_COMP(__NR_timerfd_gettime, sys_timerfd_gettime, \
+	  compat_sys_timerfd_gettime)
+
+/* fs/utimes.c */
+#define __NR_utimensat 88
+__SC_COMP(__NR_utimensat, sys_utimensat, compat_sys_utimensat)
+
+/* kernel/acct.c */
+#define __NR_acct 89
+__SYSCALL(__NR_acct, sys_acct)
+
+/* kernel/capability.c */
+#define __NR_capget 90
+__SYSCALL(__NR_capget, sys_capget)
+#define __NR_capset 91
+__SYSCALL(__NR_capset, sys_capset)
+
+/* kernel/exec_domain.c */
+#define __NR_personality 92
+__SYSCALL(__NR_personality, sys_personality)
+
+/* kernel/exit.c */
+#define __NR_exit 93
+__SYSCALL(__NR_exit, sys_exit)
+#define __NR_exit_group 94
+__SYSCALL(__NR_exit_group, sys_exit_group)
+#define __NR_waitid 95
+__SC_COMP(__NR_waitid, sys_waitid, compat_sys_waitid)
+
+/* kernel/fork.c */
+#define __NR_set_tid_address 96
+__SYSCALL(__NR_set_tid_address, sys_set_tid_address)
+#define __NR_unshare 97
+__SYSCALL(__NR_unshare, sys_unshare)
+
+/* kernel/futex.c */
+#define __NR_futex 98
+__SC_COMP(__NR_futex, sys_futex, compat_sys_futex)
+#define __NR_set_robust_list 99
+__SC_COMP(__NR_set_robust_list, sys_set_robust_list, \
+	  compat_sys_set_robust_list)
+#define __NR_get_robust_list 100
+__SC_COMP(__NR_get_robust_list, sys_get_robust_list, \
+	  compat_sys_get_robust_list)
+
+/* kernel/hrtimer.c */
+#define __NR_nanosleep 101
+__SC_COMP(__NR_nanosleep, sys_nanosleep, compat_sys_nanosleep)
+
+/* kernel/itimer.c */
+#define __NR_getitimer 102
+__SC_COMP(__NR_getitimer, sys_getitimer, compat_sys_getitimer)
+#define __NR_setitimer 103
+__SC_COMP(__NR_setitimer, sys_setitimer, compat_sys_setitimer)
+
+/* kernel/kexec.c */
+#define __NR_kexec_load 104
+__SC_COMP(__NR_kexec_load, sys_kexec_load, compat_sys_kexec_load)
+
+/* kernel/module.c */
+#define __NR_init_module 105
+__SYSCALL(__NR_init_module, sys_init_module)
+#define __NR_delete_module 106
+__SYSCALL(__NR_delete_module, sys_delete_module)
+
+/* kernel/posix-timers.c */
+#define __NR_timer_create 107
+__SC_COMP(__NR_timer_create, sys_timer_create, compat_sys_timer_create)
+#define __NR_timer_gettime 108
+__SC_COMP(__NR_timer_gettime, sys_timer_gettime, compat_sys_timer_gettime)
+#define __NR_timer_getoverrun 109
+__SYSCALL(__NR_timer_getoverrun, sys_timer_getoverrun)
+#define __NR_timer_settime 110
+__SC_COMP(__NR_timer_settime, sys_timer_settime, compat_sys_timer_settime)
+#define __NR_timer_delete 111
+__SYSCALL(__NR_timer_delete, sys_timer_delete)
+#define __NR_clock_settime 112
+__SC_COMP(__NR_clock_settime, sys_clock_settime, compat_sys_clock_settime)
+#define __NR_clock_gettime 113
+__SC_COMP(__NR_clock_gettime, sys_clock_gettime, compat_sys_clock_gettime)
+#define __NR_clock_getres 114
+__SC_COMP(__NR_clock_getres, sys_clock_getres, compat_sys_clock_getres)
+#define __NR_clock_nanosleep 115
+__SC_COMP(__NR_clock_nanosleep, sys_clock_nanosleep, \
+	  compat_sys_clock_nanosleep)
+
+/* kernel/printk.c */
+#define __NR_syslog 116
+__SYSCALL(__NR_syslog, sys_syslog)
+
+/* kernel/ptrace.c */
+#define __NR_ptrace 117
+__SYSCALL(__NR_ptrace, sys_ptrace)
+
+/* kernel/sched.c */
+#define __NR_sched_setparam 118
+__SYSCALL(__NR_sched_setparam, sys_sched_setparam)
+#define __NR_sched_setscheduler 119
+__SYSCALL(__NR_sched_setscheduler, sys_sched_setscheduler)
+#define __NR_sched_getscheduler 120
+__SYSCALL(__NR_sched_getscheduler, sys_sched_getscheduler)
+#define __NR_sched_getparam 121
+__SYSCALL(__NR_sched_getparam, sys_sched_getparam)
+#define __NR_sched_setaffinity 122
+__SC_COMP(__NR_sched_setaffinity, sys_sched_setaffinity, \
+	  compat_sys_sched_setaffinity)
+#define __NR_sched_getaffinity 123
+__SC_COMP(__NR_sched_getaffinity, sys_sched_getaffinity, \
+	  compat_sys_sched_getaffinity)
+#define __NR_sched_yield 124
+__SYSCALL(__NR_sched_yield, sys_sched_yield)
+#define __NR_sched_get_priority_max 125
+__SYSCALL(__NR_sched_get_priority_max, sys_sched_get_priority_max)
+#define __NR_sched_get_priority_min 126
+__SYSCALL(__NR_sched_get_priority_min, sys_sched_get_priority_min)
+#define __NR_sched_rr_get_interval 127
+__SC_COMP(__NR_sched_rr_get_interval, sys_sched_rr_get_interval, \
+	  compat_sys_sched_rr_get_interval)
+
+/* kernel/signal.c */
+#define __NR_restart_syscall 128
+__SYSCALL(__NR_restart_syscall, sys_restart_syscall)
+#define __NR_kill 129
+__SYSCALL(__NR_kill, sys_kill)
+#define __NR_tkill 130
+__SYSCALL(__NR_tkill, sys_tkill)
+#define __NR_tgkill 131
+__SYSCALL(__NR_tgkill, sys_tgkill)
+#define __NR_sigaltstack 132
+__SC_COMP(__NR_sigaltstack, sys_sigaltstack, compat_sys_sigaltstack)
+#define __NR_rt_sigsuspend 133
+__SC_COMP(__NR_rt_sigsuspend, sys_rt_sigsuspend, compat_sys_rt_sigsuspend)
+#define __NR_rt_sigaction 134
+__SC_COMP(__NR_rt_sigaction, sys_rt_sigaction, compat_sys_rt_sigaction)
+#define __NR_rt_sigprocmask 135
+__SYSCALL(__NR_rt_sigprocmask, sys_rt_sigprocmask)
+#define __NR_rt_sigpending 136
+__SYSCALL(__NR_rt_sigpending, sys_rt_sigpending)
+#define __NR_rt_sigtimedwait 137
+__SC_COMP(__NR_rt_sigtimedwait, sys_rt_sigtimedwait, \
+	  compat_sys_rt_sigtimedwait)
+#define __NR_rt_sigqueueinfo 138
+__SC_COMP(__NR_rt_sigqueueinfo, sys_rt_sigqueueinfo, \
+	  compat_sys_rt_sigqueueinfo)
+#define __NR_rt_sigreturn 139
+__SC_COMP(__NR_rt_sigreturn, sys_rt_sigreturn, compat_sys_rt_sigreturn)
+
+/* kernel/sys.c */
+#define __NR_setpriority 140
+__SYSCALL(__NR_setpriority, sys_setpriority)
+#define __NR_getpriority 141
+__SYSCALL(__NR_getpriority, sys_getpriority)
+#define __NR_reboot 142
+__SYSCALL(__NR_reboot, sys_reboot)
+#define __NR_setregid 143
+__SYSCALL(__NR_setregid, sys_setregid)
+#define __NR_setgid 144
+__SYSCALL(__NR_setgid, sys_setgid)
+#define __NR_setreuid 145
+__SYSCALL(__NR_setreuid, sys_setreuid)
+#define __NR_setuid 146
+__SYSCALL(__NR_setuid, sys_setuid)
+#define __NR_setresuid 147
+__SYSCALL(__NR_setresuid, sys_setresuid)
+#define __NR_getresuid 148
+__SYSCALL(__NR_getresuid, sys_getresuid)
+#define __NR_setresgid 149
+__SYSCALL(__NR_setresgid, sys_setresgid)
+#define __NR_getresgid 150
+__SYSCALL(__NR_getresgid, sys_getresgid)
+#define __NR_setfsuid 151
+__SYSCALL(__NR_setfsuid, sys_setfsuid)
+#define __NR_setfsgid 152
+__SYSCALL(__NR_setfsgid, sys_setfsgid)
+#define __NR_times 153
+__SC_COMP(__NR_times, sys_times, compat_sys_times)
+#define __NR_setpgid 154
+__SYSCALL(__NR_setpgid, sys_setpgid)
+#define __NR_getpgid 155
+__SYSCALL(__NR_getpgid, sys_getpgid)
+#define __NR_getsid 156
+__SYSCALL(__NR_getsid, sys_getsid)
+#define __NR_setsid 157
+__SYSCALL(__NR_setsid, sys_setsid)
+#define __NR_getgroups 158
+__SYSCALL(__NR_getgroups, sys_getgroups)
+#define __NR_setgroups 159
+__SYSCALL(__NR_setgroups, sys_setgroups)
+#define __NR_uname 160
+__SYSCALL(__NR_uname, sys_newuname)
+#define __NR_sethostname 161
+__SYSCALL(__NR_sethostname, sys_sethostname)
+#define __NR_setdomainname 162
+__SYSCALL(__NR_setdomainname, sys_setdomainname)
+#define __NR_getrlimit 163
+__SC_COMP(__NR_getrlimit, sys_getrlimit, compat_sys_getrlimit)
+#define __NR_setrlimit 164
+__SC_COMP(__NR_setrlimit, sys_setrlimit, compat_sys_setrlimit)
+#define __NR_getrusage 165
+__SC_COMP(__NR_getrusage, sys_getrusage, compat_sys_getrusage)
+#define __NR_umask 166
+__SYSCALL(__NR_umask, sys_umask)
+#define __NR_prctl 167
+__SYSCALL(__NR_prctl, sys_prctl)
+#define __NR_getcpu 168
+__SYSCALL(__NR_getcpu, sys_getcpu)
+
+/* kernel/time.c */
+#define __NR_gettimeofday 169
+__SC_COMP(__NR_gettimeofday, sys_gettimeofday, compat_sys_gettimeofday)
+#define __NR_settimeofday 170
+__SC_COMP(__NR_settimeofday, sys_settimeofday, compat_sys_settimeofday)
+#define __NR_adjtimex 171
+__SC_COMP(__NR_adjtimex, sys_adjtimex, compat_sys_adjtimex)
+
+/* kernel/timer.c */
+#define __NR_getpid 172
+__SYSCALL(__NR_getpid, sys_getpid)
+#define __NR_getppid 173
+__SYSCALL(__NR_getppid, sys_getppid)
+#define __NR_getuid 174
+__SYSCALL(__NR_getuid, sys_getuid)
+#define __NR_geteuid 175
+__SYSCALL(__NR_geteuid, sys_geteuid)
+#define __NR_getgid 176
+__SYSCALL(__NR_getgid, sys_getgid)
+#define __NR_getegid 177
+__SYSCALL(__NR_getegid, sys_getegid)
+#define __NR_gettid 178
+__SYSCALL(__NR_gettid, sys_gettid)
+#define __NR_sysinfo 179
+__SC_COMP(__NR_sysinfo, sys_sysinfo, compat_sys_sysinfo)
+
+/* ipc/mqueue.c */
+#define __NR_mq_open 180
+__SC_COMP(__NR_mq_open, sys_mq_open, compat_sys_mq_open)
+#define __NR_mq_unlink 181
+__SYSCALL(__NR_mq_unlink, sys_mq_unlink)
+#define __NR_mq_timedsend 182
+__SC_COMP(__NR_mq_timedsend, sys_mq_timedsend, compat_sys_mq_timedsend)
+#define __NR_mq_timedreceive 183
+__SC_COMP(__NR_mq_timedreceive, sys_mq_timedreceive, \
+	  compat_sys_mq_timedreceive)
+#define __NR_mq_notify 184
+__SC_COMP(__NR_mq_notify, sys_mq_notify, compat_sys_mq_notify)
+#define __NR_mq_getsetattr 185
+__SC_COMP(__NR_mq_getsetattr, sys_mq_getsetattr, compat_sys_mq_getsetattr)
+
+/* ipc/msg.c */
+#define __NR_msgget 186
+__SYSCALL(__NR_msgget, sys_msgget)
+#define __NR_msgctl 187
+__SC_COMP(__NR_msgctl, sys_msgctl, compat_sys_msgctl)
+#define __NR_msgrcv 188
+__SC_COMP(__NR_msgrcv, sys_msgrcv, compat_sys_msgrcv)
+#define __NR_msgsnd 189
+__SC_COMP(__NR_msgsnd, sys_msgsnd, compat_sys_msgsnd)
+
+/* ipc/sem.c */
+#define __NR_semget 190
+__SYSCALL(__NR_semget, sys_semget)
+#define __NR_semctl 191
+__SC_COMP(__NR_semctl, sys_semctl, compat_sys_semctl)
+#define __NR_semtimedop 192
+__SC_COMP(__NR_semtimedop, sys_semtimedop, compat_sys_semtimedop)
+#define __NR_semop 193
+__SYSCALL(__NR_semop, sys_semop)
+
+/* ipc/shm.c */
+#define __NR_shmget 194
+__SYSCALL(__NR_shmget, sys_shmget)
+#define __NR_shmctl 195
+__SC_COMP(__NR_shmctl, sys_shmctl, compat_sys_shmctl)
+#define __NR_shmat 196
+__SC_COMP(__NR_shmat, sys_shmat, compat_sys_shmat)
+#define __NR_shmdt 197
+__SYSCALL(__NR_shmdt, sys_shmdt)
+
+/* net/socket.c */
+#define __NR_socket 198
+__SYSCALL(__NR_socket, sys_socket)
+#define __NR_socketpair 199
+__SYSCALL(__NR_socketpair, sys_socketpair)
+#define __NR_bind 200
+__SYSCALL(__NR_bind, sys_bind)
+#define __NR_listen 201
+__SYSCALL(__NR_listen, sys_listen)
+#define __NR_accept 202
+__SYSCALL(__NR_accept, sys_accept)
+#define __NR_connect 203
+__SYSCALL(__NR_connect, sys_connect)
+#define __NR_getsockname 204
+__SYSCALL(__NR_getsockname, sys_getsockname)
+#define __NR_getpeername 205
+__SYSCALL(__NR_getpeername, sys_getpeername)
+#define __NR_sendto 206
+__SYSCALL(__NR_sendto, sys_sendto)
+#define __NR_recvfrom 207
+__SC_COMP(__NR_recvfrom, sys_recvfrom, compat_sys_recvfrom)
+#define __NR_setsockopt 208
+__SC_COMP(__NR_setsockopt, sys_setsockopt, compat_sys_setsockopt)
+#define __NR_getsockopt 209
+__SC_COMP(__NR_getsockopt, sys_getsockopt, compat_sys_getsockopt)
+#define __NR_shutdown 210
+__SYSCALL(__NR_shutdown, sys_shutdown)
+#define __NR_sendmsg 211
+__SC_COMP(__NR_sendmsg, sys_sendmsg, compat_sys_sendmsg)
+#define __NR_recvmsg 212
+__SC_COMP(__NR_recvmsg, sys_recvmsg, compat_sys_recvmsg)
+
+/* mm/filemap.c */
+#define __NR_readahead 213
+__SC_COMP(__NR_readahead, sys_readahead, compat_sys_readahead)
+
+/* mm/nommu.c, also with MMU */
+#define __NR_brk 214
+__SYSCALL(__NR_brk, sys_brk)
+#define __NR_munmap 215
+__SYSCALL(__NR_munmap, sys_munmap)
+#define __NR_mremap 216
+__SYSCALL(__NR_mremap, sys_mremap)
+
+/* security/keys/keyctl.c */
+#define __NR_add_key 217
+__SYSCALL(__NR_add_key, sys_add_key)
+#define __NR_request_key 218
+__SYSCALL(__NR_request_key, sys_request_key)
+#define __NR_keyctl 219
+__SC_COMP(__NR_keyctl, sys_keyctl, compat_sys_keyctl)
+
+/* arch/example/kernel/sys_example.c */
+#define __NR_clone 220
+__SYSCALL(__NR_clone, sys_clone)
+#define __NR_execve 221
+__SC_COMP(__NR_execve, sys_execve, compat_sys_execve)
+
+#define __NR3264_mmap 222
+__SC_3264(__NR3264_mmap, sys_mmap2, sys_mmap)
+/* mm/fadvise.c */
+#define __NR3264_fadvise64 223
+__SC_COMP(__NR3264_fadvise64, sys_fadvise64_64, compat_sys_fadvise64_64)
+
+/* mm/, CONFIG_MMU only */
+#ifndef __ARCH_NOMMU
+#define __NR_swapon 224
+__SYSCALL(__NR_swapon, sys_swapon)
+#define __NR_swapoff 225
+__SYSCALL(__NR_swapoff, sys_swapoff)
+#define __NR_mprotect 226
+__SYSCALL(__NR_mprotect, sys_mprotect)
+#define __NR_msync 227
+__SYSCALL(__NR_msync, sys_msync)
+#define __NR_mlock 228
+__SYSCALL(__NR_mlock, sys_mlock)
+#define __NR_munlock 229
+__SYSCALL(__NR_munlock, sys_munlock)
+#define __NR_mlockall 230
+__SYSCALL(__NR_mlockall, sys_mlockall)
+#define __NR_munlockall 231
+__SYSCALL(__NR_munlockall, sys_munlockall)
+#define __NR_mincore 232
+__SYSCALL(__NR_mincore, sys_mincore)
+#define __NR_madvise 233
+__SYSCALL(__NR_madvise, sys_madvise)
+#define __NR_remap_file_pages 234
+__SYSCALL(__NR_remap_file_pages, sys_remap_file_pages)
+#define __NR_mbind 235
+__SC_COMP(__NR_mbind, sys_mbind, compat_sys_mbind)
+#define __NR_get_mempolicy 236
+__SC_COMP(__NR_get_mempolicy, sys_get_mempolicy, compat_sys_get_mempolicy)
+#define __NR_set_mempolicy 237
+__SC_COMP(__NR_set_mempolicy, sys_set_mempolicy, compat_sys_set_mempolicy)
+#define __NR_migrate_pages 238
+__SC_COMP(__NR_migrate_pages, sys_migrate_pages, compat_sys_migrate_pages)
+#define __NR_move_pages 239
+__SC_COMP(__NR_move_pages, sys_move_pages, compat_sys_move_pages)
+#endif
+
+#define __NR_rt_tgsigqueueinfo 240
+__SC_COMP(__NR_rt_tgsigqueueinfo, sys_rt_tgsigqueueinfo, \
+	  compat_sys_rt_tgsigqueueinfo)
+#define __NR_perf_event_open 241
+__SYSCALL(__NR_perf_event_open, sys_perf_event_open)
+#define __NR_accept4 242
+__SYSCALL(__NR_accept4, sys_accept4)
+#define __NR_recvmmsg 243
+__SC_COMP(__NR_recvmmsg, sys_recvmmsg, compat_sys_recvmmsg)
+
+/*
+ * Architectures may provide up to 16 syscalls of their own
+ * starting with this value.
+ */
+#define __NR_arch_specific_syscall 244
+
+#define __NR_wait4 260
+__SC_COMP(__NR_wait4, sys_wait4, compat_sys_wait4)
+#define __NR_prlimit64 261
+__SYSCALL(__NR_prlimit64, sys_prlimit64)
+#define __NR_fanotify_init 262
+__SYSCALL(__NR_fanotify_init, sys_fanotify_init)
+#define __NR_fanotify_mark 263
+__SYSCALL(__NR_fanotify_mark, sys_fanotify_mark)
+#define __NR_name_to_handle_at         264
+__SYSCALL(__NR_name_to_handle_at, sys_name_to_handle_at)
+#define __NR_open_by_handle_at         265
+__SC_COMP(__NR_open_by_handle_at, sys_open_by_handle_at, \
+	  compat_sys_open_by_handle_at)
+#define __NR_clock_adjtime 266
+__SC_COMP(__NR_clock_adjtime, sys_clock_adjtime, compat_sys_clock_adjtime)
+#define __NR_syncfs 267
+__SYSCALL(__NR_syncfs, sys_syncfs)
+#define __NR_setns 268
+__SYSCALL(__NR_setns, sys_setns)
+#define __NR_sendmmsg 269
+__SC_COMP(__NR_sendmmsg, sys_sendmmsg, compat_sys_sendmmsg)
+#define __NR_process_vm_readv 270
+__SC_COMP(__NR_process_vm_readv, sys_process_vm_readv, \
+          compat_sys_process_vm_readv)
+#define __NR_process_vm_writev 271
+__SC_COMP(__NR_process_vm_writev, sys_process_vm_writev, \
+          compat_sys_process_vm_writev)
+
+#undef __NR_syscalls
+#define __NR_syscalls 272
+
+/*
+ * All syscalls below here should go away really,
+ * these are provided for both review and as a porting
+ * help for the C library version.
+*
+ * Last chance: are any of these important enough to
+ * enable by default?
+ */
+#ifdef __ARCH_WANT_SYSCALL_NO_AT
+#define __NR_open 1024
+__SYSCALL(__NR_open, sys_open)
+#define __NR_link 1025
+__SYSCALL(__NR_link, sys_link)
+#define __NR_unlink 1026
+__SYSCALL(__NR_unlink, sys_unlink)
+#define __NR_mknod 1027
+__SYSCALL(__NR_mknod, sys_mknod)
+#define __NR_chmod 1028
+__SYSCALL(__NR_chmod, sys_chmod)
+#define __NR_chown 1029
+__SYSCALL(__NR_chown, sys_chown)
+#define __NR_mkdir 1030
+__SYSCALL(__NR_mkdir, sys_mkdir)
+#define __NR_rmdir 1031
+__SYSCALL(__NR_rmdir, sys_rmdir)
+#define __NR_lchown 1032
+__SYSCALL(__NR_lchown, sys_lchown)
+#define __NR_access 1033
+__SYSCALL(__NR_access, sys_access)
+#define __NR_rename 1034
+__SYSCALL(__NR_rename, sys_rename)
+#define __NR_readlink 1035
+__SYSCALL(__NR_readlink, sys_readlink)
+#define __NR_symlink 1036
+__SYSCALL(__NR_symlink, sys_symlink)
+#define __NR_utimes 1037
+__SYSCALL(__NR_utimes, sys_utimes)
+#define __NR3264_stat 1038
+__SC_3264(__NR3264_stat, sys_stat64, sys_newstat)
+#define __NR3264_lstat 1039
+__SC_3264(__NR3264_lstat, sys_lstat64, sys_newlstat)
+
+#undef __NR_syscalls
+#define __NR_syscalls (__NR3264_lstat+1)
+#endif /* __ARCH_WANT_SYSCALL_NO_AT */
+
+#ifdef __ARCH_WANT_SYSCALL_NO_FLAGS
+#define __NR_pipe 1040
+__SYSCALL(__NR_pipe, sys_pipe)
+#define __NR_dup2 1041
+__SYSCALL(__NR_dup2, sys_dup2)
+#define __NR_epoll_create 1042
+__SYSCALL(__NR_epoll_create, sys_epoll_create)
+#define __NR_inotify_init 1043
+__SYSCALL(__NR_inotify_init, sys_inotify_init)
+#define __NR_eventfd 1044
+__SYSCALL(__NR_eventfd, sys_eventfd)
+#define __NR_signalfd 1045
+__SYSCALL(__NR_signalfd, sys_signalfd)
+
+#undef __NR_syscalls
+#define __NR_syscalls (__NR_signalfd+1)
+#endif /* __ARCH_WANT_SYSCALL_NO_FLAGS */
+
+#if (__BITS_PER_LONG == 32 || defined(__SYSCALL_COMPAT)) && \
+     defined(__ARCH_WANT_SYSCALL_OFF_T)
+#define __NR_sendfile 1046
+__SYSCALL(__NR_sendfile, sys_sendfile)
+#define __NR_ftruncate 1047
+__SYSCALL(__NR_ftruncate, sys_ftruncate)
+#define __NR_truncate 1048
+__SYSCALL(__NR_truncate, sys_truncate)
+#define __NR_stat 1049
+__SYSCALL(__NR_stat, sys_newstat)
+#define __NR_lstat 1050
+__SYSCALL(__NR_lstat, sys_newlstat)
+#define __NR_fstat 1051
+__SYSCALL(__NR_fstat, sys_newfstat)
+#define __NR_fcntl 1052
+__SYSCALL(__NR_fcntl, sys_fcntl)
+#define __NR_fadvise64 1053
+#define __ARCH_WANT_SYS_FADVISE64
+__SYSCALL(__NR_fadvise64, sys_fadvise64)
+#define __NR_newfstatat 1054
+#define __ARCH_WANT_SYS_NEWFSTATAT
+__SYSCALL(__NR_newfstatat, sys_newfstatat)
+#define __NR_fstatfs 1055
+__SYSCALL(__NR_fstatfs, sys_fstatfs)
+#define __NR_statfs 1056
+__SYSCALL(__NR_statfs, sys_statfs)
+#define __NR_lseek 1057
+__SYSCALL(__NR_lseek, sys_lseek)
+#define __NR_mmap 1058
+__SYSCALL(__NR_mmap, sys_mmap)
+
+#undef __NR_syscalls
+#define __NR_syscalls (__NR_mmap+1)
+#endif /* 32 bit off_t syscalls */
+
+#ifdef __ARCH_WANT_SYSCALL_DEPRECATED
+#define __NR_alarm 1059
+#define __ARCH_WANT_SYS_ALARM
+__SYSCALL(__NR_alarm, sys_alarm)
+#define __NR_getpgrp 1060
+#define __ARCH_WANT_SYS_GETPGRP
+__SYSCALL(__NR_getpgrp, sys_getpgrp)
+#define __NR_pause 1061
+#define __ARCH_WANT_SYS_PAUSE
+__SYSCALL(__NR_pause, sys_pause)
+#define __NR_time 1062
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_COMPAT_SYS_TIME
+__SYSCALL(__NR_time, sys_time)
+#define __NR_utime 1063
+#define __ARCH_WANT_SYS_UTIME
+__SYSCALL(__NR_utime, sys_utime)
+
+#define __NR_creat 1064
+__SYSCALL(__NR_creat, sys_creat)
+#define __NR_getdents 1065
+#define __ARCH_WANT_SYS_GETDENTS
+__SYSCALL(__NR_getdents, sys_getdents)
+#define __NR_futimesat 1066
+__SYSCALL(__NR_futimesat, sys_futimesat)
+#define __NR_select 1067
+#define __ARCH_WANT_SYS_SELECT
+__SYSCALL(__NR_select, sys_select)
+#define __NR_poll 1068
+__SYSCALL(__NR_poll, sys_poll)
+#define __NR_epoll_wait 1069
+__SYSCALL(__NR_epoll_wait, sys_epoll_wait)
+#define __NR_ustat 1070
+__SYSCALL(__NR_ustat, sys_ustat)
+#define __NR_vfork 1071
+__SYSCALL(__NR_vfork, sys_vfork)
+#define __NR_oldwait4 1072
+__SYSCALL(__NR_oldwait4, sys_wait4)
+#define __NR_recv 1073
+__SYSCALL(__NR_recv, sys_recv)
+#define __NR_send 1074
+__SYSCALL(__NR_send, sys_send)
+#define __NR_bdflush 1075
+__SYSCALL(__NR_bdflush, sys_bdflush)
+#define __NR_umount 1076
+__SYSCALL(__NR_umount, sys_oldumount)
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __NR_uselib 1077
+__SYSCALL(__NR_uselib, sys_uselib)
+#define __NR__sysctl 1078
+__SYSCALL(__NR__sysctl, sys_sysctl)
+
+#define __NR_fork 1079
+#ifdef CONFIG_MMU
+__SYSCALL(__NR_fork, sys_fork)
+#else
+__SYSCALL(__NR_fork, sys_ni_syscall)
+#endif /* CONFIG_MMU */
+
+#undef __NR_syscalls
+#define __NR_syscalls (__NR_fork+1)
+
+#endif /* __ARCH_WANT_SYSCALL_DEPRECATED */
+
+/*
+ * 32 bit systems traditionally used different
+ * syscalls for off_t and loff_t arguments, while
+ * 64 bit systems only need the off_t version.
+ * For new 32 bit platforms, there is no need to
+ * implement the old 32 bit off_t syscalls, so
+ * they take different names.
+ * Here we map the numbers so that both versions
+ * use the same syscall table layout.
+ */
+#if __BITS_PER_LONG == 64 && !defined(__SYSCALL_COMPAT)
+#define __NR_fcntl __NR3264_fcntl
+#define __NR_statfs __NR3264_statfs
+#define __NR_fstatfs __NR3264_fstatfs
+#define __NR_truncate __NR3264_truncate
+#define __NR_ftruncate __NR3264_ftruncate
+#define __NR_lseek __NR3264_lseek
+#define __NR_sendfile __NR3264_sendfile
+#define __NR_newfstatat __NR3264_fstatat
+#define __NR_fstat __NR3264_fstat
+#define __NR_mmap __NR3264_mmap
+#define __NR_fadvise64 __NR3264_fadvise64
+#ifdef __NR3264_stat
+#define __NR_stat __NR3264_stat
+#define __NR_lstat __NR3264_lstat
+#endif
+#else
+#define __NR_fcntl64 __NR3264_fcntl
+#define __NR_statfs64 __NR3264_statfs
+#define __NR_fstatfs64 __NR3264_fstatfs
+#define __NR_truncate64 __NR3264_truncate
+#define __NR_ftruncate64 __NR3264_ftruncate
+#define __NR_llseek __NR3264_lseek
+#define __NR_sendfile64 __NR3264_sendfile
+#define __NR_fstatat64 __NR3264_fstatat
+#define __NR_fstat64 __NR3264_fstat
+#define __NR_mmap2 __NR3264_mmap
+#define __NR_fadvise64_64 __NR3264_fadvise64
+#ifdef __NR3264_stat
+#define __NR_stat64 __NR3264_stat
+#define __NR_lstat64 __NR3264_lstat
+#endif
+#endif
+
+#ifdef __KERNEL__
+
+/*
+ * These are required system calls, we should
+ * invert the logic eventually and let them
+ * be selected by default.
+ */
+#if __BITS_PER_LONG == 32
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_LLSEEK
+#endif
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+#define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_GENERIC_UNISTD_H */
diff --git a/include/asm-generic/user.h b/include/asm-generic/user.h
new file mode 100644
index 00000000..35638c34
--- /dev/null
+++ b/include/asm-generic/user.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_GENERIC_USER_H
+#define __ASM_GENERIC_USER_H
+/*
+ * This file may define a 'struct user' structure. However, it is only
+ * used for a.out files, which are not supported on new architectures.
+ */
+
+#endif	/* __ASM_GENERIC_USER_H */
diff --git a/include/asm-generic/vga.h b/include/asm-generic/vga.h
new file mode 100644
index 00000000..36c8ff52
--- /dev/null
+++ b/include/asm-generic/vga.h
@@ -0,0 +1,24 @@
+/*
+ *	Access to VGA videoram
+ *
+ *	(c) 1998 Martin Mares <mj@ucw.cz>
+ */
+#ifndef __ASM_GENERIC_VGA_H
+#define __ASM_GENERIC_VGA_H
+
+/*
+ *	On most architectures that support VGA, we can just
+ *	recalculate addresses and then access the videoram
+ *	directly without any black magic.
+ *
+ *	Everyone else needs to ioremap the address and use
+ *	proper I/O accesses.
+ */
+#ifndef VGA_MAP_MEM
+#define VGA_MAP_MEM(x, s) (unsigned long)phys_to_virt(x)
+#endif
+
+#define vga_readb(x) (*(x))
+#define vga_writeb(x, y) (*(y) = (x))
+
+#endif /* _ASM_GENERIC_VGA_H */
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
new file mode 100644
index 00000000..8aeadf6b
--- /dev/null
+++ b/include/asm-generic/vmlinux.lds.h
@@ -0,0 +1,805 @@
+/*
+ * Helper macros to support writing architecture specific
+ * linker scripts.
+ *
+ * A minimal linker scripts has following content:
+ * [This is a sample, architectures may have special requiriements]
+ *
+ * OUTPUT_FORMAT(...)
+ * OUTPUT_ARCH(...)
+ * ENTRY(...)
+ * SECTIONS
+ * {
+ *	. = START;
+ *	__init_begin = .;
+ *	HEAD_TEXT_SECTION
+ *	INIT_TEXT_SECTION(PAGE_SIZE)
+ *	INIT_DATA_SECTION(...)
+ *	PERCPU_SECTION(CACHELINE_SIZE)
+ *	__init_end = .;
+ *
+ *	_stext = .;
+ *	TEXT_SECTION = 0
+ *	_etext = .;
+ *
+ *      _sdata = .;
+ *	RO_DATA_SECTION(PAGE_SIZE)
+ *	RW_DATA_SECTION(...)
+ *	_edata = .;
+ *
+ *	EXCEPTION_TABLE(...)
+ *	NOTES
+ *
+ *	BSS_SECTION(0, 0, 0)
+ *	_end = .;
+ *
+ *	STABS_DEBUG
+ *	DWARF_DEBUG
+ *
+ *	DISCARDS		// must be the last
+ * }
+ *
+ * [__init_begin, __init_end] is the init section that may be freed after init
+ * [_stext, _etext] is the text section
+ * [_sdata, _edata] is the data section
+ *
+ * Some of the included output section have their own set of constants.
+ * Examples are: [__initramfs_start, __initramfs_end] for initramfs and
+ *               [__nosave_begin, __nosave_end] for the nosave data
+ */
+
+#ifndef LOAD_OFFSET
+#define LOAD_OFFSET 0
+#endif
+
+#ifndef SYMBOL_PREFIX
+#define VMLINUX_SYMBOL(sym) sym
+#else
+#define PASTE2(x,y) x##y
+#define PASTE(x,y) PASTE2(x,y)
+#define VMLINUX_SYMBOL(sym) PASTE(SYMBOL_PREFIX, sym)
+#endif
+
+/* Align . to a 8 byte boundary equals to maximum function alignment. */
+#define ALIGN_FUNCTION()  . = ALIGN(8)
+
+/*
+ * Align to a 32 byte boundary equal to the
+ * alignment gcc 4.5 uses for a struct
+ */
+#define STRUCT_ALIGNMENT 32
+#define STRUCT_ALIGN() . = ALIGN(STRUCT_ALIGNMENT)
+
+/* The actual configuration determine if the init/exit sections
+ * are handled as text/data or they can be discarded (which
+ * often happens at runtime)
+ */
+#ifdef CONFIG_HOTPLUG
+#define DEV_KEEP(sec)    *(.dev##sec)
+#define DEV_DISCARD(sec)
+#else
+#define DEV_KEEP(sec)
+#define DEV_DISCARD(sec) *(.dev##sec)
+#endif
+
+#ifdef CONFIG_HOTPLUG_CPU
+#define CPU_KEEP(sec)    *(.cpu##sec)
+#define CPU_DISCARD(sec)
+#else
+#define CPU_KEEP(sec)
+#define CPU_DISCARD(sec) *(.cpu##sec)
+#endif
+
+#if defined(CONFIG_MEMORY_HOTPLUG)
+#define MEM_KEEP(sec)    *(.mem##sec)
+#define MEM_DISCARD(sec)
+#else
+#define MEM_KEEP(sec)
+#define MEM_DISCARD(sec) *(.mem##sec)
+#endif
+
+#ifdef CONFIG_FTRACE_MCOUNT_RECORD
+#define MCOUNT_REC()	. = ALIGN(8);				\
+			VMLINUX_SYMBOL(__start_mcount_loc) = .; \
+			*(__mcount_loc)				\
+			VMLINUX_SYMBOL(__stop_mcount_loc) = .;
+#else
+#define MCOUNT_REC()
+#endif
+
+#ifdef CONFIG_TRACE_BRANCH_PROFILING
+#define LIKELY_PROFILE()	VMLINUX_SYMBOL(__start_annotated_branch_profile) = .; \
+				*(_ftrace_annotated_branch)			      \
+				VMLINUX_SYMBOL(__stop_annotated_branch_profile) = .;
+#else
+#define LIKELY_PROFILE()
+#endif
+
+#ifdef CONFIG_PROFILE_ALL_BRANCHES
+#define BRANCH_PROFILE()	VMLINUX_SYMBOL(__start_branch_profile) = .;   \
+				*(_ftrace_branch)			      \
+				VMLINUX_SYMBOL(__stop_branch_profile) = .;
+#else
+#define BRANCH_PROFILE()
+#endif
+
+#ifdef CONFIG_EVENT_TRACING
+#define FTRACE_EVENTS()	. = ALIGN(8);					\
+			VMLINUX_SYMBOL(__start_ftrace_events) = .;	\
+			*(_ftrace_events)				\
+			VMLINUX_SYMBOL(__stop_ftrace_events) = .;
+#else
+#define FTRACE_EVENTS()
+#endif
+
+#ifdef CONFIG_TRACING
+#define TRACE_PRINTKS() VMLINUX_SYMBOL(__start___trace_bprintk_fmt) = .;      \
+			 *(__trace_printk_fmt) /* Trace_printk fmt' pointer */ \
+			 VMLINUX_SYMBOL(__stop___trace_bprintk_fmt) = .;
+#else
+#define TRACE_PRINTKS()
+#endif
+
+#ifdef CONFIG_FTRACE_SYSCALLS
+#define TRACE_SYSCALLS() . = ALIGN(8);					\
+			 VMLINUX_SYMBOL(__start_syscalls_metadata) = .;	\
+			 *(__syscalls_metadata)				\
+			 VMLINUX_SYMBOL(__stop_syscalls_metadata) = .;
+#else
+#define TRACE_SYSCALLS()
+#endif
+
+
+#define KERNEL_DTB()							\
+	STRUCT_ALIGN();							\
+	VMLINUX_SYMBOL(__dtb_start) = .;				\
+	*(.dtb.init.rodata)						\
+	VMLINUX_SYMBOL(__dtb_end) = .;
+
+/* .data section */
+#define DATA_DATA							\
+	*(.data)							\
+	*(.ref.data)							\
+	*(.data..shared_aligned) /* percpu related */			\
+	DEV_KEEP(init.data)						\
+	DEV_KEEP(exit.data)						\
+	CPU_KEEP(init.data)						\
+	CPU_KEEP(exit.data)						\
+	MEM_KEEP(init.data)						\
+	MEM_KEEP(exit.data)						\
+	*(.data.unlikely)						\
+	STRUCT_ALIGN();							\
+	*(__tracepoints)						\
+	/* implement dynamic printk debug */				\
+	. = ALIGN(8);                                                   \
+	VMLINUX_SYMBOL(__start___jump_table) = .;                       \
+	*(__jump_table)                                                 \
+	VMLINUX_SYMBOL(__stop___jump_table) = .;                        \
+	. = ALIGN(8);							\
+	VMLINUX_SYMBOL(__start___verbose) = .;                          \
+	*(__verbose)                                                    \
+	VMLINUX_SYMBOL(__stop___verbose) = .;				\
+	LIKELY_PROFILE()		       				\
+	BRANCH_PROFILE()						\
+	TRACE_PRINTKS()
+
+/*
+ * Data section helpers
+ */
+#define NOSAVE_DATA							\
+	. = ALIGN(PAGE_SIZE);						\
+	VMLINUX_SYMBOL(__nosave_begin) = .;				\
+	*(.data..nosave)						\
+	. = ALIGN(PAGE_SIZE);						\
+	VMLINUX_SYMBOL(__nosave_end) = .;
+
+#define PAGE_ALIGNED_DATA(page_align)					\
+	. = ALIGN(page_align);						\
+	*(.data..page_aligned)
+
+#define READ_MOSTLY_DATA(align)						\
+	. = ALIGN(align);						\
+	*(.data..read_mostly)						\
+	. = ALIGN(align);
+
+#define CACHELINE_ALIGNED_DATA(align)					\
+	. = ALIGN(align);						\
+	*(.data..cacheline_aligned)
+
+#define INIT_TASK_DATA(align)						\
+	. = ALIGN(align);						\
+	*(.data..init_task)
+
+/*
+ * Read only Data
+ */
+#define RO_DATA_SECTION(align)						\
+	. = ALIGN((align));						\
+	.rodata           : AT(ADDR(.rodata) - LOAD_OFFSET) {		\
+		VMLINUX_SYMBOL(__start_rodata) = .;			\
+		*(.rodata) *(.rodata.*)					\
+		*(__vermagic)		/* Kernel version magic */	\
+		. = ALIGN(8);						\
+		VMLINUX_SYMBOL(__start___tracepoints_ptrs) = .;		\
+		*(__tracepoints_ptrs)	/* Tracepoints: pointer array */\
+		VMLINUX_SYMBOL(__stop___tracepoints_ptrs) = .;		\
+		*(__tracepoints_strings)/* Tracepoints: strings */	\
+	}								\
+									\
+	.rodata1          : AT(ADDR(.rodata1) - LOAD_OFFSET) {		\
+		*(.rodata1)						\
+	}								\
+									\
+	BUG_TABLE							\
+									\
+	/* PCI quirks */						\
+	.pci_fixup        : AT(ADDR(.pci_fixup) - LOAD_OFFSET) {	\
+		VMLINUX_SYMBOL(__start_pci_fixups_early) = .;		\
+		*(.pci_fixup_early)					\
+		VMLINUX_SYMBOL(__end_pci_fixups_early) = .;		\
+		VMLINUX_SYMBOL(__start_pci_fixups_header) = .;		\
+		*(.pci_fixup_header)					\
+		VMLINUX_SYMBOL(__end_pci_fixups_header) = .;		\
+		VMLINUX_SYMBOL(__start_pci_fixups_final) = .;		\
+		*(.pci_fixup_final)					\
+		VMLINUX_SYMBOL(__end_pci_fixups_final) = .;		\
+		VMLINUX_SYMBOL(__start_pci_fixups_enable) = .;		\
+		*(.pci_fixup_enable)					\
+		VMLINUX_SYMBOL(__end_pci_fixups_enable) = .;		\
+		VMLINUX_SYMBOL(__start_pci_fixups_resume) = .;		\
+		*(.pci_fixup_resume)					\
+		VMLINUX_SYMBOL(__end_pci_fixups_resume) = .;		\
+		VMLINUX_SYMBOL(__start_pci_fixups_resume_early) = .;	\
+		*(.pci_fixup_resume_early)				\
+		VMLINUX_SYMBOL(__end_pci_fixups_resume_early) = .;	\
+		VMLINUX_SYMBOL(__start_pci_fixups_suspend) = .;		\
+		*(.pci_fixup_suspend)					\
+		VMLINUX_SYMBOL(__end_pci_fixups_suspend) = .;		\
+	}								\
+									\
+	/* Built-in firmware blobs */					\
+	.builtin_fw        : AT(ADDR(.builtin_fw) - LOAD_OFFSET) {	\
+		VMLINUX_SYMBOL(__start_builtin_fw) = .;			\
+		*(.builtin_fw)						\
+		VMLINUX_SYMBOL(__end_builtin_fw) = .;			\
+	}								\
+									\
+	/* RapidIO route ops */						\
+	.rio_ops        : AT(ADDR(.rio_ops) - LOAD_OFFSET) {		\
+		VMLINUX_SYMBOL(__start_rio_switch_ops) = .;		\
+		*(.rio_switch_ops)					\
+		VMLINUX_SYMBOL(__end_rio_switch_ops) = .;		\
+	}								\
+									\
+	TRACEDATA							\
+									\
+	/* Kernel symbol table: Normal symbols */			\
+	__ksymtab         : AT(ADDR(__ksymtab) - LOAD_OFFSET) {		\
+		VMLINUX_SYMBOL(__start___ksymtab) = .;			\
+		*(SORT(___ksymtab+*))					\
+		VMLINUX_SYMBOL(__stop___ksymtab) = .;			\
+	}								\
+									\
+	/* Kernel symbol table: GPL-only symbols */			\
+	__ksymtab_gpl     : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) {	\
+		VMLINUX_SYMBOL(__start___ksymtab_gpl) = .;		\
+		*(SORT(___ksymtab_gpl+*))				\
+		VMLINUX_SYMBOL(__stop___ksymtab_gpl) = .;		\
+	}								\
+									\
+	/* Kernel symbol table: Normal unused symbols */		\
+	__ksymtab_unused  : AT(ADDR(__ksymtab_unused) - LOAD_OFFSET) {	\
+		VMLINUX_SYMBOL(__start___ksymtab_unused) = .;		\
+		*(SORT(___ksymtab_unused+*))				\
+		VMLINUX_SYMBOL(__stop___ksymtab_unused) = .;		\
+	}								\
+									\
+	/* Kernel symbol table: GPL-only unused symbols */		\
+	__ksymtab_unused_gpl : AT(ADDR(__ksymtab_unused_gpl) - LOAD_OFFSET) { \
+		VMLINUX_SYMBOL(__start___ksymtab_unused_gpl) = .;	\
+		*(SORT(___ksymtab_unused_gpl+*))			\
+		VMLINUX_SYMBOL(__stop___ksymtab_unused_gpl) = .;	\
+	}								\
+									\
+	/* Kernel symbol table: GPL-future-only symbols */		\
+	__ksymtab_gpl_future : AT(ADDR(__ksymtab_gpl_future) - LOAD_OFFSET) { \
+		VMLINUX_SYMBOL(__start___ksymtab_gpl_future) = .;	\
+		*(SORT(___ksymtab_gpl_future+*))			\
+		VMLINUX_SYMBOL(__stop___ksymtab_gpl_future) = .;	\
+	}								\
+									\
+	/* Kernel symbol table: Normal symbols */			\
+	__kcrctab         : AT(ADDR(__kcrctab) - LOAD_OFFSET) {		\
+		VMLINUX_SYMBOL(__start___kcrctab) = .;			\
+		*(SORT(___kcrctab+*))					\
+		VMLINUX_SYMBOL(__stop___kcrctab) = .;			\
+	}								\
+									\
+	/* Kernel symbol table: GPL-only symbols */			\
+	__kcrctab_gpl     : AT(ADDR(__kcrctab_gpl) - LOAD_OFFSET) {	\
+		VMLINUX_SYMBOL(__start___kcrctab_gpl) = .;		\
+		*(SORT(___kcrctab_gpl+*))				\
+		VMLINUX_SYMBOL(__stop___kcrctab_gpl) = .;		\
+	}								\
+									\
+	/* Kernel symbol table: Normal unused symbols */		\
+	__kcrctab_unused  : AT(ADDR(__kcrctab_unused) - LOAD_OFFSET) {	\
+		VMLINUX_SYMBOL(__start___kcrctab_unused) = .;		\
+		*(SORT(___kcrctab_unused+*))				\
+		VMLINUX_SYMBOL(__stop___kcrctab_unused) = .;		\
+	}								\
+									\
+	/* Kernel symbol table: GPL-only unused symbols */		\
+	__kcrctab_unused_gpl : AT(ADDR(__kcrctab_unused_gpl) - LOAD_OFFSET) { \
+		VMLINUX_SYMBOL(__start___kcrctab_unused_gpl) = .;	\
+		*(SORT(___kcrctab_unused_gpl+*))			\
+		VMLINUX_SYMBOL(__stop___kcrctab_unused_gpl) = .;	\
+	}								\
+									\
+	/* Kernel symbol table: GPL-future-only symbols */		\
+	__kcrctab_gpl_future : AT(ADDR(__kcrctab_gpl_future) - LOAD_OFFSET) { \
+		VMLINUX_SYMBOL(__start___kcrctab_gpl_future) = .;	\
+		*(SORT(___kcrctab_gpl_future+*))			\
+		VMLINUX_SYMBOL(__stop___kcrctab_gpl_future) = .;	\
+	}								\
+									\
+	/* Kernel symbol table: strings */				\
+        __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) {	\
+		*(__ksymtab_strings)					\
+	}								\
+									\
+	/* __*init sections */						\
+	__init_rodata : AT(ADDR(__init_rodata) - LOAD_OFFSET) {		\
+		*(.ref.rodata)						\
+		DEV_KEEP(init.rodata)					\
+		DEV_KEEP(exit.rodata)					\
+		CPU_KEEP(init.rodata)					\
+		CPU_KEEP(exit.rodata)					\
+		MEM_KEEP(init.rodata)					\
+		MEM_KEEP(exit.rodata)					\
+	}								\
+									\
+	/* Built-in module parameters. */				\
+	__param : AT(ADDR(__param) - LOAD_OFFSET) {			\
+		VMLINUX_SYMBOL(__start___param) = .;			\
+		*(__param)						\
+		VMLINUX_SYMBOL(__stop___param) = .;			\
+	}								\
+									\
+	/* Built-in module versions. */					\
+	__modver : AT(ADDR(__modver) - LOAD_OFFSET) {			\
+		VMLINUX_SYMBOL(__start___modver) = .;			\
+		*(__modver)						\
+		VMLINUX_SYMBOL(__stop___modver) = .;			\
+		. = ALIGN((align));					\
+		VMLINUX_SYMBOL(__end_rodata) = .;			\
+	}								\
+	. = ALIGN((align));
+
+/* RODATA & RO_DATA provided for backward compatibility.
+ * All archs are supposed to use RO_DATA() */
+#define RODATA          RO_DATA_SECTION(4096)
+#define RO_DATA(align)  RO_DATA_SECTION(align)
+
+#define SECURITY_INIT							\
+	.security_initcall.init : AT(ADDR(.security_initcall.init) - LOAD_OFFSET) { \
+		VMLINUX_SYMBOL(__security_initcall_start) = .;		\
+		*(.security_initcall.init) 				\
+		VMLINUX_SYMBOL(__security_initcall_end) = .;		\
+	}
+
+/* .text section. Map to function alignment to avoid address changes
+ * during second ld run in second ld pass when generating System.map */
+#define TEXT_TEXT							\
+		ALIGN_FUNCTION();					\
+		*(.text.hot)						\
+		*(.text)						\
+		*(.ref.text)						\
+	DEV_KEEP(init.text)						\
+	DEV_KEEP(exit.text)						\
+	CPU_KEEP(init.text)						\
+	CPU_KEEP(exit.text)						\
+	MEM_KEEP(init.text)						\
+	MEM_KEEP(exit.text)						\
+		*(.text.unlikely)
+
+
+/* sched.text is aling to function alignment to secure we have same
+ * address even at second ld pass when generating System.map */
+#define SCHED_TEXT							\
+		ALIGN_FUNCTION();					\
+		VMLINUX_SYMBOL(__sched_text_start) = .;			\
+		*(.sched.text)						\
+		VMLINUX_SYMBOL(__sched_text_end) = .;
+
+/* spinlock.text is aling to function alignment to secure we have same
+ * address even at second ld pass when generating System.map */
+#define LOCK_TEXT							\
+		ALIGN_FUNCTION();					\
+		VMLINUX_SYMBOL(__lock_text_start) = .;			\
+		*(.spinlock.text)					\
+		VMLINUX_SYMBOL(__lock_text_end) = .;
+
+#define KPROBES_TEXT							\
+		ALIGN_FUNCTION();					\
+		VMLINUX_SYMBOL(__kprobes_text_start) = .;		\
+		*(.kprobes.text)					\
+		VMLINUX_SYMBOL(__kprobes_text_end) = .;
+
+#define ENTRY_TEXT							\
+		ALIGN_FUNCTION();					\
+		VMLINUX_SYMBOL(__entry_text_start) = .;			\
+		*(.entry.text)						\
+		VMLINUX_SYMBOL(__entry_text_end) = .;
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#define IRQENTRY_TEXT							\
+		ALIGN_FUNCTION();					\
+		VMLINUX_SYMBOL(__irqentry_text_start) = .;		\
+		*(.irqentry.text)					\
+		VMLINUX_SYMBOL(__irqentry_text_end) = .;
+#else
+#define IRQENTRY_TEXT
+#endif
+
+/* Section used for early init (in .S files) */
+#define HEAD_TEXT  *(.head.text)
+
+#define HEAD_TEXT_SECTION							\
+	.head.text : AT(ADDR(.head.text) - LOAD_OFFSET) {		\
+		HEAD_TEXT						\
+	}
+
+/*
+ * Exception table
+ */
+#define EXCEPTION_TABLE(align)						\
+	. = ALIGN(align);						\
+	__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {		\
+		VMLINUX_SYMBOL(__start___ex_table) = .;			\
+		*(__ex_table)						\
+		VMLINUX_SYMBOL(__stop___ex_table) = .;			\
+	}
+
+/*
+ * Init task
+ */
+#define INIT_TASK_DATA_SECTION(align)					\
+	. = ALIGN(align);						\
+	.data..init_task :  AT(ADDR(.data..init_task) - LOAD_OFFSET) {	\
+		INIT_TASK_DATA(align)					\
+	}
+
+#ifdef CONFIG_CONSTRUCTORS
+#define KERNEL_CTORS()	. = ALIGN(8);			   \
+			VMLINUX_SYMBOL(__ctors_start) = .; \
+			*(.ctors)			   \
+			VMLINUX_SYMBOL(__ctors_end) = .;
+#else
+#define KERNEL_CTORS()
+#endif
+
+/* init and exit section handling */
+#define INIT_DATA							\
+	*(.init.data)							\
+	DEV_DISCARD(init.data)						\
+	CPU_DISCARD(init.data)						\
+	MEM_DISCARD(init.data)						\
+	KERNEL_CTORS()							\
+	*(.init.rodata)							\
+	MCOUNT_REC()							\
+	FTRACE_EVENTS()							\
+	TRACE_SYSCALLS()						\
+	DEV_DISCARD(init.rodata)					\
+	CPU_DISCARD(init.rodata)					\
+	MEM_DISCARD(init.rodata)					\
+	KERNEL_DTB()
+
+#define INIT_TEXT							\
+	*(.init.text)							\
+	DEV_DISCARD(init.text)						\
+	CPU_DISCARD(init.text)						\
+	MEM_DISCARD(init.text)
+
+#define EXIT_DATA							\
+	*(.exit.data)							\
+	DEV_DISCARD(exit.data)						\
+	DEV_DISCARD(exit.rodata)					\
+	CPU_DISCARD(exit.data)						\
+	CPU_DISCARD(exit.rodata)					\
+	MEM_DISCARD(exit.data)						\
+	MEM_DISCARD(exit.rodata)
+
+#define EXIT_TEXT							\
+	*(.exit.text)							\
+	DEV_DISCARD(exit.text)						\
+	CPU_DISCARD(exit.text)						\
+	MEM_DISCARD(exit.text)
+
+#define EXIT_CALL							\
+	*(.exitcall.exit)
+
+/*
+ * bss (Block Started by Symbol) - uninitialized data
+ * zeroed during startup
+ */
+#define SBSS(sbss_align)						\
+	. = ALIGN(sbss_align);						\
+	.sbss : AT(ADDR(.sbss) - LOAD_OFFSET) {				\
+		*(.sbss)						\
+		*(.scommon)						\
+	}
+
+#define BSS(bss_align)							\
+	. = ALIGN(bss_align);						\
+	.bss : AT(ADDR(.bss) - LOAD_OFFSET) {				\
+		*(.bss..page_aligned)					\
+		*(.dynbss)						\
+		*(.bss)							\
+		*(COMMON)						\
+	}
+
+/*
+ * DWARF debug sections.
+ * Symbols in the DWARF debugging sections are relative to
+ * the beginning of the section so we begin them at 0.
+ */
+#define DWARF_DEBUG							\
+		/* DWARF 1 */						\
+		.debug          0 : { *(.debug) }			\
+		.line           0 : { *(.line) }			\
+		/* GNU DWARF 1 extensions */				\
+		.debug_srcinfo  0 : { *(.debug_srcinfo) }		\
+		.debug_sfnames  0 : { *(.debug_sfnames) }		\
+		/* DWARF 1.1 and DWARF 2 */				\
+		.debug_aranges  0 : { *(.debug_aranges) }		\
+		.debug_pubnames 0 : { *(.debug_pubnames) }		\
+		/* DWARF 2 */						\
+		.debug_info     0 : { *(.debug_info			\
+				.gnu.linkonce.wi.*) }			\
+		.debug_abbrev   0 : { *(.debug_abbrev) }		\
+		.debug_line     0 : { *(.debug_line) }			\
+		.debug_frame    0 : { *(.debug_frame) }			\
+		.debug_str      0 : { *(.debug_str) }			\
+		.debug_loc      0 : { *(.debug_loc) }			\
+		.debug_macinfo  0 : { *(.debug_macinfo) }		\
+		/* SGI/MIPS DWARF 2 extensions */			\
+		.debug_weaknames 0 : { *(.debug_weaknames) }		\
+		.debug_funcnames 0 : { *(.debug_funcnames) }		\
+		.debug_typenames 0 : { *(.debug_typenames) }		\
+		.debug_varnames  0 : { *(.debug_varnames) }		\
+
+		/* Stabs debugging sections.  */
+#define STABS_DEBUG							\
+		.stab 0 : { *(.stab) }					\
+		.stabstr 0 : { *(.stabstr) }				\
+		.stab.excl 0 : { *(.stab.excl) }			\
+		.stab.exclstr 0 : { *(.stab.exclstr) }			\
+		.stab.index 0 : { *(.stab.index) }			\
+		.stab.indexstr 0 : { *(.stab.indexstr) }		\
+		.comment 0 : { *(.comment) }
+
+#ifdef CONFIG_GENERIC_BUG
+#define BUG_TABLE							\
+	. = ALIGN(8);							\
+	__bug_table : AT(ADDR(__bug_table) - LOAD_OFFSET) {		\
+		VMLINUX_SYMBOL(__start___bug_table) = .;		\
+		*(__bug_table)						\
+		VMLINUX_SYMBOL(__stop___bug_table) = .;			\
+	}
+#else
+#define BUG_TABLE
+#endif
+
+#ifdef CONFIG_PM_TRACE
+#define TRACEDATA							\
+	. = ALIGN(4);							\
+	.tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) {		\
+		VMLINUX_SYMBOL(__tracedata_start) = .;			\
+		*(.tracedata)						\
+		VMLINUX_SYMBOL(__tracedata_end) = .;			\
+	}
+#else
+#define TRACEDATA
+#endif
+
+#define NOTES								\
+	.notes : AT(ADDR(.notes) - LOAD_OFFSET) {			\
+		VMLINUX_SYMBOL(__start_notes) = .;			\
+		*(.note.*)						\
+		VMLINUX_SYMBOL(__stop_notes) = .;			\
+	}
+
+#define INIT_SETUP(initsetup_align)					\
+		. = ALIGN(initsetup_align);				\
+		VMLINUX_SYMBOL(__setup_start) = .;			\
+		*(.init.setup)						\
+		VMLINUX_SYMBOL(__setup_end) = .;
+
+#define INIT_CALLS_LEVEL(level)						\
+		VMLINUX_SYMBOL(__initcall##level##_start) = .;		\
+		*(.initcall##level##.init)				\
+		*(.initcall##level##s.init)				\
+
+#define INIT_CALLS							\
+		VMLINUX_SYMBOL(__initcall_start) = .;			\
+		*(.initcallearly.init)					\
+		INIT_CALLS_LEVEL(0)					\
+		INIT_CALLS_LEVEL(1)					\
+		INIT_CALLS_LEVEL(2)					\
+		INIT_CALLS_LEVEL(3)					\
+		INIT_CALLS_LEVEL(4)					\
+		INIT_CALLS_LEVEL(5)					\
+		INIT_CALLS_LEVEL(rootfs)				\
+		INIT_CALLS_LEVEL(6)					\
+		INIT_CALLS_LEVEL(7)					\
+		VMLINUX_SYMBOL(__initcall_end) = .;
+
+#define CON_INITCALL							\
+		VMLINUX_SYMBOL(__con_initcall_start) = .;		\
+		*(.con_initcall.init)					\
+		VMLINUX_SYMBOL(__con_initcall_end) = .;
+
+#define SECURITY_INITCALL						\
+		VMLINUX_SYMBOL(__security_initcall_start) = .;		\
+		*(.security_initcall.init)				\
+		VMLINUX_SYMBOL(__security_initcall_end) = .;
+
+#ifdef CONFIG_BLK_DEV_INITRD
+#define INIT_RAM_FS							\
+	. = ALIGN(4);							\
+	VMLINUX_SYMBOL(__initramfs_start) = .;				\
+	*(.init.ramfs)							\
+	. = ALIGN(8);							\
+	*(.init.ramfs.info)
+#else
+#define INIT_RAM_FS
+#endif
+
+/*
+ * Default discarded sections.
+ *
+ * Some archs want to discard exit text/data at runtime rather than
+ * link time due to cross-section references such as alt instructions,
+ * bug table, eh_frame, etc.  DISCARDS must be the last of output
+ * section definitions so that such archs put those in earlier section
+ * definitions.
+ */
+#define DISCARDS							\
+	/DISCARD/ : {							\
+	EXIT_TEXT							\
+	EXIT_DATA							\
+	EXIT_CALL							\
+	*(.discard)							\
+	*(.discard.*)							\
+	}
+
+/**
+ * PERCPU_INPUT - the percpu input sections
+ * @cacheline: cacheline size
+ *
+ * The core percpu section names and core symbols which do not rely
+ * directly upon load addresses.
+ *
+ * @cacheline is used to align subsections to avoid false cacheline
+ * sharing between subsections for different purposes.
+ */
+#define PERCPU_INPUT(cacheline)						\
+	VMLINUX_SYMBOL(__per_cpu_start) = .;				\
+	*(.data..percpu..first)						\
+	. = ALIGN(PAGE_SIZE);						\
+	*(.data..percpu..page_aligned)					\
+	. = ALIGN(cacheline);						\
+	*(.data..percpu..readmostly)					\
+	. = ALIGN(cacheline);						\
+	*(.data..percpu)						\
+	*(.data..percpu..shared_aligned)				\
+	VMLINUX_SYMBOL(__per_cpu_end) = .;
+
+/**
+ * PERCPU_VADDR - define output section for percpu area
+ * @cacheline: cacheline size
+ * @vaddr: explicit base address (optional)
+ * @phdr: destination PHDR (optional)
+ *
+ * Macro which expands to output section for percpu area.
+ *
+ * @cacheline is used to align subsections to avoid false cacheline
+ * sharing between subsections for different purposes.
+ *
+ * If @vaddr is not blank, it specifies explicit base address and all
+ * percpu symbols will be offset from the given address.  If blank,
+ * @vaddr always equals @laddr + LOAD_OFFSET.
+ *
+ * @phdr defines the output PHDR to use if not blank.  Be warned that
+ * output PHDR is sticky.  If @phdr is specified, the next output
+ * section in the linker script will go there too.  @phdr should have
+ * a leading colon.
+ *
+ * Note that this macros defines __per_cpu_load as an absolute symbol.
+ * If there is no need to put the percpu section at a predetermined
+ * address, use PERCPU_SECTION.
+ */
+#define PERCPU_VADDR(cacheline, vaddr, phdr)				\
+	VMLINUX_SYMBOL(__per_cpu_load) = .;				\
+	.data..percpu vaddr : AT(VMLINUX_SYMBOL(__per_cpu_load)		\
+				- LOAD_OFFSET) {			\
+		PERCPU_INPUT(cacheline)					\
+	} phdr								\
+	. = VMLINUX_SYMBOL(__per_cpu_load) + SIZEOF(.data..percpu);
+
+/**
+ * PERCPU_SECTION - define output section for percpu area, simple version
+ * @cacheline: cacheline size
+ *
+ * Align to PAGE_SIZE and outputs output section for percpu area.  This
+ * macro doesn't manipulate @vaddr or @phdr and __per_cpu_load and
+ * __per_cpu_start will be identical.
+ *
+ * This macro is equivalent to ALIGN(PAGE_SIZE); PERCPU_VADDR(@cacheline,,)
+ * except that __per_cpu_load is defined as a relative symbol against
+ * .data..percpu which is required for relocatable x86_32 configuration.
+ */
+#define PERCPU_SECTION(cacheline)					\
+	. = ALIGN(PAGE_SIZE);						\
+	.data..percpu	: AT(ADDR(.data..percpu) - LOAD_OFFSET) {	\
+		VMLINUX_SYMBOL(__per_cpu_load) = .;			\
+		PERCPU_INPUT(cacheline)					\
+	}
+
+
+/*
+ * Definition of the high level *_SECTION macros
+ * They will fit only a subset of the architectures
+ */
+
+
+/*
+ * Writeable data.
+ * All sections are combined in a single .data section.
+ * The sections following CONSTRUCTORS are arranged so their
+ * typical alignment matches.
+ * A cacheline is typical/always less than a PAGE_SIZE so
+ * the sections that has this restriction (or similar)
+ * is located before the ones requiring PAGE_SIZE alignment.
+ * NOSAVE_DATA starts and ends with a PAGE_SIZE alignment which
+ * matches the requirement of PAGE_ALIGNED_DATA.
+ *
+ * use 0 as page_align if page_aligned data is not used */
+#define RW_DATA_SECTION(cacheline, pagealigned, inittask)		\
+	. = ALIGN(PAGE_SIZE);						\
+	.data : AT(ADDR(.data) - LOAD_OFFSET) {				\
+		INIT_TASK_DATA(inittask)				\
+		NOSAVE_DATA						\
+		PAGE_ALIGNED_DATA(pagealigned)				\
+		CACHELINE_ALIGNED_DATA(cacheline)			\
+		READ_MOSTLY_DATA(cacheline)				\
+		DATA_DATA						\
+		CONSTRUCTORS						\
+	}
+
+#define INIT_TEXT_SECTION(inittext_align)				\
+	. = ALIGN(inittext_align);					\
+	.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {		\
+		VMLINUX_SYMBOL(_sinittext) = .;				\
+		INIT_TEXT						\
+		VMLINUX_SYMBOL(_einittext) = .;				\
+	}
+
+#define INIT_DATA_SECTION(initsetup_align)				\
+	.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {		\
+		INIT_DATA						\
+		INIT_SETUP(initsetup_align)				\
+		INIT_CALLS						\
+		CON_INITCALL						\
+		SECURITY_INITCALL					\
+		INIT_RAM_FS						\
+	}
+
+#define BSS_SECTION(sbss_align, bss_align, stop_align)			\
+	. = ALIGN(sbss_align);						\
+	VMLINUX_SYMBOL(__bss_start) = .;				\
+	SBSS(sbss_align)						\
+	BSS(bss_align)							\
+	. = ALIGN(stop_align);						\
+	VMLINUX_SYMBOL(__bss_stop) = .;
diff --git a/include/asm-generic/xor.h b/include/asm-generic/xor.h
new file mode 100644
index 00000000..6028fb86
--- /dev/null
+++ b/include/asm-generic/xor.h
@@ -0,0 +1,718 @@
+/*
+ * include/asm-generic/xor.h
+ *
+ * Generic optimized RAID-5 checksumming functions.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/prefetch.h>
+
+static void
+xor_8regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+	long lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		p1[0] ^= p2[0];
+		p1[1] ^= p2[1];
+		p1[2] ^= p2[2];
+		p1[3] ^= p2[3];
+		p1[4] ^= p2[4];
+		p1[5] ^= p2[5];
+		p1[6] ^= p2[6];
+		p1[7] ^= p2[7];
+		p1 += 8;
+		p2 += 8;
+	} while (--lines > 0);
+}
+
+static void
+xor_8regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	    unsigned long *p3)
+{
+	long lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		p1[0] ^= p2[0] ^ p3[0];
+		p1[1] ^= p2[1] ^ p3[1];
+		p1[2] ^= p2[2] ^ p3[2];
+		p1[3] ^= p2[3] ^ p3[3];
+		p1[4] ^= p2[4] ^ p3[4];
+		p1[5] ^= p2[5] ^ p3[5];
+		p1[6] ^= p2[6] ^ p3[6];
+		p1[7] ^= p2[7] ^ p3[7];
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+	} while (--lines > 0);
+}
+
+static void
+xor_8regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	    unsigned long *p3, unsigned long *p4)
+{
+	long lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		p1[0] ^= p2[0] ^ p3[0] ^ p4[0];
+		p1[1] ^= p2[1] ^ p3[1] ^ p4[1];
+		p1[2] ^= p2[2] ^ p3[2] ^ p4[2];
+		p1[3] ^= p2[3] ^ p3[3] ^ p4[3];
+		p1[4] ^= p2[4] ^ p3[4] ^ p4[4];
+		p1[5] ^= p2[5] ^ p3[5] ^ p4[5];
+		p1[6] ^= p2[6] ^ p3[6] ^ p4[6];
+		p1[7] ^= p2[7] ^ p3[7] ^ p4[7];
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+		p4 += 8;
+	} while (--lines > 0);
+}
+
+static void
+xor_8regs_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	    unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+	long lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		p1[0] ^= p2[0] ^ p3[0] ^ p4[0] ^ p5[0];
+		p1[1] ^= p2[1] ^ p3[1] ^ p4[1] ^ p5[1];
+		p1[2] ^= p2[2] ^ p3[2] ^ p4[2] ^ p5[2];
+		p1[3] ^= p2[3] ^ p3[3] ^ p4[3] ^ p5[3];
+		p1[4] ^= p2[4] ^ p3[4] ^ p4[4] ^ p5[4];
+		p1[5] ^= p2[5] ^ p3[5] ^ p4[5] ^ p5[5];
+		p1[6] ^= p2[6] ^ p3[6] ^ p4[6] ^ p5[6];
+		p1[7] ^= p2[7] ^ p3[7] ^ p4[7] ^ p5[7];
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+		p4 += 8;
+		p5 += 8;
+	} while (--lines > 0);
+}
+
+static void
+xor_32regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+	long lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		register long d0, d1, d2, d3, d4, d5, d6, d7;
+		d0 = p1[0];	/* Pull the stuff into registers	*/
+		d1 = p1[1];	/*  ... in bursts, if possible.		*/
+		d2 = p1[2];
+		d3 = p1[3];
+		d4 = p1[4];
+		d5 = p1[5];
+		d6 = p1[6];
+		d7 = p1[7];
+		d0 ^= p2[0];
+		d1 ^= p2[1];
+		d2 ^= p2[2];
+		d3 ^= p2[3];
+		d4 ^= p2[4];
+		d5 ^= p2[5];
+		d6 ^= p2[6];
+		d7 ^= p2[7];
+		p1[0] = d0;	/* Store the result (in bursts)		*/
+		p1[1] = d1;
+		p1[2] = d2;
+		p1[3] = d3;
+		p1[4] = d4;
+		p1[5] = d5;
+		p1[6] = d6;
+		p1[7] = d7;
+		p1 += 8;
+		p2 += 8;
+	} while (--lines > 0);
+}
+
+static void
+xor_32regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	    unsigned long *p3)
+{
+	long lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		register long d0, d1, d2, d3, d4, d5, d6, d7;
+		d0 = p1[0];	/* Pull the stuff into registers	*/
+		d1 = p1[1];	/*  ... in bursts, if possible.		*/
+		d2 = p1[2];
+		d3 = p1[3];
+		d4 = p1[4];
+		d5 = p1[5];
+		d6 = p1[6];
+		d7 = p1[7];
+		d0 ^= p2[0];
+		d1 ^= p2[1];
+		d2 ^= p2[2];
+		d3 ^= p2[3];
+		d4 ^= p2[4];
+		d5 ^= p2[5];
+		d6 ^= p2[6];
+		d7 ^= p2[7];
+		d0 ^= p3[0];
+		d1 ^= p3[1];
+		d2 ^= p3[2];
+		d3 ^= p3[3];
+		d4 ^= p3[4];
+		d5 ^= p3[5];
+		d6 ^= p3[6];
+		d7 ^= p3[7];
+		p1[0] = d0;	/* Store the result (in bursts)		*/
+		p1[1] = d1;
+		p1[2] = d2;
+		p1[3] = d3;
+		p1[4] = d4;
+		p1[5] = d5;
+		p1[6] = d6;
+		p1[7] = d7;
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+	} while (--lines > 0);
+}
+
+static void
+xor_32regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	    unsigned long *p3, unsigned long *p4)
+{
+	long lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		register long d0, d1, d2, d3, d4, d5, d6, d7;
+		d0 = p1[0];	/* Pull the stuff into registers	*/
+		d1 = p1[1];	/*  ... in bursts, if possible.		*/
+		d2 = p1[2];
+		d3 = p1[3];
+		d4 = p1[4];
+		d5 = p1[5];
+		d6 = p1[6];
+		d7 = p1[7];
+		d0 ^= p2[0];
+		d1 ^= p2[1];
+		d2 ^= p2[2];
+		d3 ^= p2[3];
+		d4 ^= p2[4];
+		d5 ^= p2[5];
+		d6 ^= p2[6];
+		d7 ^= p2[7];
+		d0 ^= p3[0];
+		d1 ^= p3[1];
+		d2 ^= p3[2];
+		d3 ^= p3[3];
+		d4 ^= p3[4];
+		d5 ^= p3[5];
+		d6 ^= p3[6];
+		d7 ^= p3[7];
+		d0 ^= p4[0];
+		d1 ^= p4[1];
+		d2 ^= p4[2];
+		d3 ^= p4[3];
+		d4 ^= p4[4];
+		d5 ^= p4[5];
+		d6 ^= p4[6];
+		d7 ^= p4[7];
+		p1[0] = d0;	/* Store the result (in bursts)		*/
+		p1[1] = d1;
+		p1[2] = d2;
+		p1[3] = d3;
+		p1[4] = d4;
+		p1[5] = d5;
+		p1[6] = d6;
+		p1[7] = d7;
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+		p4 += 8;
+	} while (--lines > 0);
+}
+
+static void
+xor_32regs_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	    unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+	long lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		register long d0, d1, d2, d3, d4, d5, d6, d7;
+		d0 = p1[0];	/* Pull the stuff into registers	*/
+		d1 = p1[1];	/*  ... in bursts, if possible.		*/
+		d2 = p1[2];
+		d3 = p1[3];
+		d4 = p1[4];
+		d5 = p1[5];
+		d6 = p1[6];
+		d7 = p1[7];
+		d0 ^= p2[0];
+		d1 ^= p2[1];
+		d2 ^= p2[2];
+		d3 ^= p2[3];
+		d4 ^= p2[4];
+		d5 ^= p2[5];
+		d6 ^= p2[6];
+		d7 ^= p2[7];
+		d0 ^= p3[0];
+		d1 ^= p3[1];
+		d2 ^= p3[2];
+		d3 ^= p3[3];
+		d4 ^= p3[4];
+		d5 ^= p3[5];
+		d6 ^= p3[6];
+		d7 ^= p3[7];
+		d0 ^= p4[0];
+		d1 ^= p4[1];
+		d2 ^= p4[2];
+		d3 ^= p4[3];
+		d4 ^= p4[4];
+		d5 ^= p4[5];
+		d6 ^= p4[6];
+		d7 ^= p4[7];
+		d0 ^= p5[0];
+		d1 ^= p5[1];
+		d2 ^= p5[2];
+		d3 ^= p5[3];
+		d4 ^= p5[4];
+		d5 ^= p5[5];
+		d6 ^= p5[6];
+		d7 ^= p5[7];
+		p1[0] = d0;	/* Store the result (in bursts)		*/
+		p1[1] = d1;
+		p1[2] = d2;
+		p1[3] = d3;
+		p1[4] = d4;
+		p1[5] = d5;
+		p1[6] = d6;
+		p1[7] = d7;
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+		p4 += 8;
+		p5 += 8;
+	} while (--lines > 0);
+}
+
+static void
+xor_8regs_p_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+	long lines = bytes / (sizeof (long)) / 8 - 1;
+	prefetchw(p1);
+	prefetch(p2);
+
+	do {
+		prefetchw(p1+8);
+		prefetch(p2+8);
+ once_more:
+		p1[0] ^= p2[0];
+		p1[1] ^= p2[1];
+		p1[2] ^= p2[2];
+		p1[3] ^= p2[3];
+		p1[4] ^= p2[4];
+		p1[5] ^= p2[5];
+		p1[6] ^= p2[6];
+		p1[7] ^= p2[7];
+		p1 += 8;
+		p2 += 8;
+	} while (--lines > 0);
+	if (lines == 0)
+		goto once_more;
+}
+
+static void
+xor_8regs_p_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	    unsigned long *p3)
+{
+	long lines = bytes / (sizeof (long)) / 8 - 1;
+	prefetchw(p1);
+	prefetch(p2);
+	prefetch(p3);
+
+	do {
+		prefetchw(p1+8);
+		prefetch(p2+8);
+		prefetch(p3+8);
+ once_more:
+		p1[0] ^= p2[0] ^ p3[0];
+		p1[1] ^= p2[1] ^ p3[1];
+		p1[2] ^= p2[2] ^ p3[2];
+		p1[3] ^= p2[3] ^ p3[3];
+		p1[4] ^= p2[4] ^ p3[4];
+		p1[5] ^= p2[5] ^ p3[5];
+		p1[6] ^= p2[6] ^ p3[6];
+		p1[7] ^= p2[7] ^ p3[7];
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+	} while (--lines > 0);
+	if (lines == 0)
+		goto once_more;
+}
+
+static void
+xor_8regs_p_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	    unsigned long *p3, unsigned long *p4)
+{
+	long lines = bytes / (sizeof (long)) / 8 - 1;
+
+	prefetchw(p1);
+	prefetch(p2);
+	prefetch(p3);
+	prefetch(p4);
+
+	do {
+		prefetchw(p1+8);
+		prefetch(p2+8);
+		prefetch(p3+8);
+		prefetch(p4+8);
+ once_more:
+		p1[0] ^= p2[0] ^ p3[0] ^ p4[0];
+		p1[1] ^= p2[1] ^ p3[1] ^ p4[1];
+		p1[2] ^= p2[2] ^ p3[2] ^ p4[2];
+		p1[3] ^= p2[3] ^ p3[3] ^ p4[3];
+		p1[4] ^= p2[4] ^ p3[4] ^ p4[4];
+		p1[5] ^= p2[5] ^ p3[5] ^ p4[5];
+		p1[6] ^= p2[6] ^ p3[6] ^ p4[6];
+		p1[7] ^= p2[7] ^ p3[7] ^ p4[7];
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+		p4 += 8;
+	} while (--lines > 0);
+	if (lines == 0)
+		goto once_more;
+}
+
+static void
+xor_8regs_p_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	    unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+	long lines = bytes / (sizeof (long)) / 8 - 1;
+
+	prefetchw(p1);
+	prefetch(p2);
+	prefetch(p3);
+	prefetch(p4);
+	prefetch(p5);
+
+	do {
+		prefetchw(p1+8);
+		prefetch(p2+8);
+		prefetch(p3+8);
+		prefetch(p4+8);
+		prefetch(p5+8);
+ once_more:
+		p1[0] ^= p2[0] ^ p3[0] ^ p4[0] ^ p5[0];
+		p1[1] ^= p2[1] ^ p3[1] ^ p4[1] ^ p5[1];
+		p1[2] ^= p2[2] ^ p3[2] ^ p4[2] ^ p5[2];
+		p1[3] ^= p2[3] ^ p3[3] ^ p4[3] ^ p5[3];
+		p1[4] ^= p2[4] ^ p3[4] ^ p4[4] ^ p5[4];
+		p1[5] ^= p2[5] ^ p3[5] ^ p4[5] ^ p5[5];
+		p1[6] ^= p2[6] ^ p3[6] ^ p4[6] ^ p5[6];
+		p1[7] ^= p2[7] ^ p3[7] ^ p4[7] ^ p5[7];
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+		p4 += 8;
+		p5 += 8;
+	} while (--lines > 0);
+	if (lines == 0)
+		goto once_more;
+}
+
+static void
+xor_32regs_p_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+	long lines = bytes / (sizeof (long)) / 8 - 1;
+
+	prefetchw(p1);
+	prefetch(p2);
+
+	do {
+		register long d0, d1, d2, d3, d4, d5, d6, d7;
+
+		prefetchw(p1+8);
+		prefetch(p2+8);
+ once_more:
+		d0 = p1[0];	/* Pull the stuff into registers	*/
+		d1 = p1[1];	/*  ... in bursts, if possible.		*/
+		d2 = p1[2];
+		d3 = p1[3];
+		d4 = p1[4];
+		d5 = p1[5];
+		d6 = p1[6];
+		d7 = p1[7];
+		d0 ^= p2[0];
+		d1 ^= p2[1];
+		d2 ^= p2[2];
+		d3 ^= p2[3];
+		d4 ^= p2[4];
+		d5 ^= p2[5];
+		d6 ^= p2[6];
+		d7 ^= p2[7];
+		p1[0] = d0;	/* Store the result (in bursts)		*/
+		p1[1] = d1;
+		p1[2] = d2;
+		p1[3] = d3;
+		p1[4] = d4;
+		p1[5] = d5;
+		p1[6] = d6;
+		p1[7] = d7;
+		p1 += 8;
+		p2 += 8;
+	} while (--lines > 0);
+	if (lines == 0)
+		goto once_more;
+}
+
+static void
+xor_32regs_p_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	    unsigned long *p3)
+{
+	long lines = bytes / (sizeof (long)) / 8 - 1;
+
+	prefetchw(p1);
+	prefetch(p2);
+	prefetch(p3);
+
+	do {
+		register long d0, d1, d2, d3, d4, d5, d6, d7;
+
+		prefetchw(p1+8);
+		prefetch(p2+8);
+		prefetch(p3+8);
+ once_more:
+		d0 = p1[0];	/* Pull the stuff into registers	*/
+		d1 = p1[1];	/*  ... in bursts, if possible.		*/
+		d2 = p1[2];
+		d3 = p1[3];
+		d4 = p1[4];
+		d5 = p1[5];
+		d6 = p1[6];
+		d7 = p1[7];
+		d0 ^= p2[0];
+		d1 ^= p2[1];
+		d2 ^= p2[2];
+		d3 ^= p2[3];
+		d4 ^= p2[4];
+		d5 ^= p2[5];
+		d6 ^= p2[6];
+		d7 ^= p2[7];
+		d0 ^= p3[0];
+		d1 ^= p3[1];
+		d2 ^= p3[2];
+		d3 ^= p3[3];
+		d4 ^= p3[4];
+		d5 ^= p3[5];
+		d6 ^= p3[6];
+		d7 ^= p3[7];
+		p1[0] = d0;	/* Store the result (in bursts)		*/
+		p1[1] = d1;
+		p1[2] = d2;
+		p1[3] = d3;
+		p1[4] = d4;
+		p1[5] = d5;
+		p1[6] = d6;
+		p1[7] = d7;
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+	} while (--lines > 0);
+	if (lines == 0)
+		goto once_more;
+}
+
+static void
+xor_32regs_p_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	    unsigned long *p3, unsigned long *p4)
+{
+	long lines = bytes / (sizeof (long)) / 8 - 1;
+
+	prefetchw(p1);
+	prefetch(p2);
+	prefetch(p3);
+	prefetch(p4);
+
+	do {
+		register long d0, d1, d2, d3, d4, d5, d6, d7;
+
+		prefetchw(p1+8);
+		prefetch(p2+8);
+		prefetch(p3+8);
+		prefetch(p4+8);
+ once_more:
+		d0 = p1[0];	/* Pull the stuff into registers	*/
+		d1 = p1[1];	/*  ... in bursts, if possible.		*/
+		d2 = p1[2];
+		d3 = p1[3];
+		d4 = p1[4];
+		d5 = p1[5];
+		d6 = p1[6];
+		d7 = p1[7];
+		d0 ^= p2[0];
+		d1 ^= p2[1];
+		d2 ^= p2[2];
+		d3 ^= p2[3];
+		d4 ^= p2[4];
+		d5 ^= p2[5];
+		d6 ^= p2[6];
+		d7 ^= p2[7];
+		d0 ^= p3[0];
+		d1 ^= p3[1];
+		d2 ^= p3[2];
+		d3 ^= p3[3];
+		d4 ^= p3[4];
+		d5 ^= p3[5];
+		d6 ^= p3[6];
+		d7 ^= p3[7];
+		d0 ^= p4[0];
+		d1 ^= p4[1];
+		d2 ^= p4[2];
+		d3 ^= p4[3];
+		d4 ^= p4[4];
+		d5 ^= p4[5];
+		d6 ^= p4[6];
+		d7 ^= p4[7];
+		p1[0] = d0;	/* Store the result (in bursts)		*/
+		p1[1] = d1;
+		p1[2] = d2;
+		p1[3] = d3;
+		p1[4] = d4;
+		p1[5] = d5;
+		p1[6] = d6;
+		p1[7] = d7;
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+		p4 += 8;
+	} while (--lines > 0);
+	if (lines == 0)
+		goto once_more;
+}
+
+static void
+xor_32regs_p_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	    unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+	long lines = bytes / (sizeof (long)) / 8 - 1;
+
+	prefetchw(p1);
+	prefetch(p2);
+	prefetch(p3);
+	prefetch(p4);
+	prefetch(p5);
+
+	do {
+		register long d0, d1, d2, d3, d4, d5, d6, d7;
+
+		prefetchw(p1+8);
+		prefetch(p2+8);
+		prefetch(p3+8);
+		prefetch(p4+8);
+		prefetch(p5+8);
+ once_more:
+		d0 = p1[0];	/* Pull the stuff into registers	*/
+		d1 = p1[1];	/*  ... in bursts, if possible.		*/
+		d2 = p1[2];
+		d3 = p1[3];
+		d4 = p1[4];
+		d5 = p1[5];
+		d6 = p1[6];
+		d7 = p1[7];
+		d0 ^= p2[0];
+		d1 ^= p2[1];
+		d2 ^= p2[2];
+		d3 ^= p2[3];
+		d4 ^= p2[4];
+		d5 ^= p2[5];
+		d6 ^= p2[6];
+		d7 ^= p2[7];
+		d0 ^= p3[0];
+		d1 ^= p3[1];
+		d2 ^= p3[2];
+		d3 ^= p3[3];
+		d4 ^= p3[4];
+		d5 ^= p3[5];
+		d6 ^= p3[6];
+		d7 ^= p3[7];
+		d0 ^= p4[0];
+		d1 ^= p4[1];
+		d2 ^= p4[2];
+		d3 ^= p4[3];
+		d4 ^= p4[4];
+		d5 ^= p4[5];
+		d6 ^= p4[6];
+		d7 ^= p4[7];
+		d0 ^= p5[0];
+		d1 ^= p5[1];
+		d2 ^= p5[2];
+		d3 ^= p5[3];
+		d4 ^= p5[4];
+		d5 ^= p5[5];
+		d6 ^= p5[6];
+		d7 ^= p5[7];
+		p1[0] = d0;	/* Store the result (in bursts)		*/
+		p1[1] = d1;
+		p1[2] = d2;
+		p1[3] = d3;
+		p1[4] = d4;
+		p1[5] = d5;
+		p1[6] = d6;
+		p1[7] = d7;
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+		p4 += 8;
+		p5 += 8;
+	} while (--lines > 0);
+	if (lines == 0)
+		goto once_more;
+}
+
+static struct xor_block_template xor_block_8regs = {
+	.name = "8regs",
+	.do_2 = xor_8regs_2,
+	.do_3 = xor_8regs_3,
+	.do_4 = xor_8regs_4,
+	.do_5 = xor_8regs_5,
+};
+
+static struct xor_block_template xor_block_32regs = {
+	.name = "32regs",
+	.do_2 = xor_32regs_2,
+	.do_3 = xor_32regs_3,
+	.do_4 = xor_32regs_4,
+	.do_5 = xor_32regs_5,
+};
+
+static struct xor_block_template xor_block_8regs_p = {
+	.name = "8regs_prefetch",
+	.do_2 = xor_8regs_p_2,
+	.do_3 = xor_8regs_p_3,
+	.do_4 = xor_8regs_p_4,
+	.do_5 = xor_8regs_p_5,
+};
+
+static struct xor_block_template xor_block_32regs_p = {
+	.name = "32regs_prefetch",
+	.do_2 = xor_32regs_p_2,
+	.do_3 = xor_32regs_p_3,
+	.do_4 = xor_32regs_p_4,
+	.do_5 = xor_32regs_p_5,
+};
+
+#define XOR_TRY_TEMPLATES			\
+	do {					\
+		xor_speed(&xor_block_8regs);	\
+		xor_speed(&xor_block_8regs_p);	\
+		xor_speed(&xor_block_32regs);	\
+		xor_speed(&xor_block_32regs_p);	\
+	} while (0)
diff --git a/include/crypto/aead.h b/include/crypto/aead.h
new file mode 100644
index 00000000..0edf949f
--- /dev/null
+++ b/include/crypto/aead.h
@@ -0,0 +1,105 @@
+/*
+ * AEAD: Authenticated Encryption with Associated Data
+ * 
+ * Copyright (c) 2007 Herbert Xu <herbert@gondor.apana.org.au>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option) 
+ * any later version.
+ *
+ */
+
+#ifndef _CRYPTO_AEAD_H
+#define _CRYPTO_AEAD_H
+
+#include <linux/crypto.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+
+/**
+ *	struct aead_givcrypt_request - AEAD request with IV generation
+ *	@seq: Sequence number for IV generation
+ *	@giv: Space for generated IV
+ *	@areq: The AEAD request itself
+ */
+struct aead_givcrypt_request {
+	u64 seq;
+	u8 *giv;
+
+	struct aead_request areq;
+};
+
+static inline struct crypto_aead *aead_givcrypt_reqtfm(
+	struct aead_givcrypt_request *req)
+{
+	return crypto_aead_reqtfm(&req->areq);
+}
+
+static inline int crypto_aead_givencrypt(struct aead_givcrypt_request *req)
+{
+	struct aead_tfm *crt = crypto_aead_crt(aead_givcrypt_reqtfm(req));
+	return crt->givencrypt(req);
+};
+
+static inline int crypto_aead_givdecrypt(struct aead_givcrypt_request *req)
+{
+	struct aead_tfm *crt = crypto_aead_crt(aead_givcrypt_reqtfm(req));
+	return crt->givdecrypt(req);
+};
+
+static inline void aead_givcrypt_set_tfm(struct aead_givcrypt_request *req,
+					 struct crypto_aead *tfm)
+{
+	req->areq.base.tfm = crypto_aead_tfm(tfm);
+}
+
+static inline struct aead_givcrypt_request *aead_givcrypt_alloc(
+	struct crypto_aead *tfm, gfp_t gfp)
+{
+	struct aead_givcrypt_request *req;
+
+	req = kmalloc(sizeof(struct aead_givcrypt_request) +
+		      crypto_aead_reqsize(tfm), gfp);
+
+	if (likely(req))
+		aead_givcrypt_set_tfm(req, tfm);
+
+	return req;
+}
+
+static inline void aead_givcrypt_free(struct aead_givcrypt_request *req)
+{
+	kfree(req);
+}
+
+static inline void aead_givcrypt_set_callback(
+	struct aead_givcrypt_request *req, u32 flags,
+	crypto_completion_t complete, void *data)
+{
+	aead_request_set_callback(&req->areq, flags, complete, data);
+}
+
+static inline void aead_givcrypt_set_crypt(struct aead_givcrypt_request *req,
+					   struct scatterlist *src,
+					   struct scatterlist *dst,
+					   unsigned int nbytes, void *iv)
+{
+	aead_request_set_crypt(&req->areq, src, dst, nbytes, iv);
+}
+
+static inline void aead_givcrypt_set_assoc(struct aead_givcrypt_request *req,
+					   struct scatterlist *assoc,
+					   unsigned int assoclen)
+{
+	aead_request_set_assoc(&req->areq, assoc, assoclen);
+}
+
+static inline void aead_givcrypt_set_giv(struct aead_givcrypt_request *req,
+					 u8 *giv, u64 seq)
+{
+	req->giv = giv;
+	req->seq = seq;
+}
+
+#endif	/* _CRYPTO_AEAD_H */
diff --git a/include/crypto/aes.h b/include/crypto/aes.h
new file mode 100644
index 00000000..7524ba3b
--- /dev/null
+++ b/include/crypto/aes.h
@@ -0,0 +1,39 @@
+/*
+ * Common values for AES algorithms
+ */
+
+#ifndef _CRYPTO_AES_H
+#define _CRYPTO_AES_H
+
+#include <linux/types.h>
+#include <linux/crypto.h>
+
+#define AES_MIN_KEY_SIZE	16
+#define AES_MAX_KEY_SIZE	32
+#define AES_KEYSIZE_128		16
+#define AES_KEYSIZE_192		24
+#define AES_KEYSIZE_256		32
+#define AES_BLOCK_SIZE		16
+#define AES_MAX_KEYLENGTH	(15 * 16)
+#define AES_MAX_KEYLENGTH_U32	(AES_MAX_KEYLENGTH / sizeof(u32))
+
+/*
+ * Please ensure that the first two fields are 16-byte aligned
+ * relative to the start of the structure, i.e., don't move them!
+ */
+struct crypto_aes_ctx {
+	u32 key_enc[AES_MAX_KEYLENGTH_U32];
+	u32 key_dec[AES_MAX_KEYLENGTH_U32];
+	u32 key_length;
+};
+
+extern const u32 crypto_ft_tab[4][256];
+extern const u32 crypto_fl_tab[4][256];
+extern const u32 crypto_it_tab[4][256];
+extern const u32 crypto_il_tab[4][256];
+
+int crypto_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key,
+		unsigned int key_len);
+int crypto_aes_expand_key(struct crypto_aes_ctx *ctx, const u8 *in_key,
+		unsigned int key_len);
+#endif
diff --git a/include/crypto/algapi.h b/include/crypto/algapi.h
new file mode 100644
index 00000000..418d270e
--- /dev/null
+++ b/include/crypto/algapi.h
@@ -0,0 +1,390 @@
+/*
+ * Cryptographic API for algorithms (i.e., low-level API).
+ *
+ * Copyright (c) 2006 Herbert Xu <herbert@gondor.apana.org.au>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option) 
+ * any later version.
+ *
+ */
+#ifndef _CRYPTO_ALGAPI_H
+#define _CRYPTO_ALGAPI_H
+
+#include <linux/crypto.h>
+#include <linux/list.h>
+#include <linux/kernel.h>
+#include <linux/skbuff.h>
+
+struct module;
+struct rtattr;
+struct seq_file;
+
+struct crypto_type {
+	unsigned int (*ctxsize)(struct crypto_alg *alg, u32 type, u32 mask);
+	unsigned int (*extsize)(struct crypto_alg *alg);
+	int (*init)(struct crypto_tfm *tfm, u32 type, u32 mask);
+	int (*init_tfm)(struct crypto_tfm *tfm);
+	void (*show)(struct seq_file *m, struct crypto_alg *alg);
+	int (*report)(struct sk_buff *skb, struct crypto_alg *alg);
+	struct crypto_alg *(*lookup)(const char *name, u32 type, u32 mask);
+
+	unsigned int type;
+	unsigned int maskclear;
+	unsigned int maskset;
+	unsigned int tfmsize;
+};
+
+struct crypto_instance {
+	struct crypto_alg alg;
+
+	struct crypto_template *tmpl;
+	struct hlist_node list;
+
+	void *__ctx[] CRYPTO_MINALIGN_ATTR;
+};
+
+struct crypto_template {
+	struct list_head list;
+	struct hlist_head instances;
+	struct module *module;
+
+	struct crypto_instance *(*alloc)(struct rtattr **tb);
+	void (*free)(struct crypto_instance *inst);
+	int (*create)(struct crypto_template *tmpl, struct rtattr **tb);
+
+	char name[CRYPTO_MAX_ALG_NAME];
+};
+
+struct crypto_spawn {
+	struct list_head list;
+	struct crypto_alg *alg;
+	struct crypto_instance *inst;
+	const struct crypto_type *frontend;
+	u32 mask;
+};
+
+struct crypto_queue {
+	struct list_head list;
+	struct list_head *backlog;
+
+	unsigned int qlen;
+	unsigned int max_qlen;
+};
+
+struct scatter_walk {
+	struct scatterlist *sg;
+	unsigned int offset;
+};
+
+struct blkcipher_walk {
+	union {
+		struct {
+			struct page *page;
+			unsigned long offset;
+		} phys;
+
+		struct {
+			u8 *page;
+			u8 *addr;
+		} virt;
+	} src, dst;
+
+	struct scatter_walk in;
+	unsigned int nbytes;
+
+	struct scatter_walk out;
+	unsigned int total;
+
+	void *page;
+	u8 *buffer;
+	u8 *iv;
+
+	int flags;
+	unsigned int blocksize;
+};
+
+struct ablkcipher_walk {
+	struct {
+		struct page *page;
+		unsigned int offset;
+	} src, dst;
+
+	struct scatter_walk	in;
+	unsigned int		nbytes;
+	struct scatter_walk	out;
+	unsigned int		total;
+	struct list_head	buffers;
+	u8			*iv_buffer;
+	u8			*iv;
+	int			flags;
+	unsigned int		blocksize;
+};
+
+extern const struct crypto_type crypto_ablkcipher_type;
+extern const struct crypto_type crypto_aead_type;
+extern const struct crypto_type crypto_blkcipher_type;
+
+void crypto_mod_put(struct crypto_alg *alg);
+
+int crypto_register_template(struct crypto_template *tmpl);
+void crypto_unregister_template(struct crypto_template *tmpl);
+struct crypto_template *crypto_lookup_template(const char *name);
+
+int crypto_register_instance(struct crypto_template *tmpl,
+			     struct crypto_instance *inst);
+int crypto_unregister_instance(struct crypto_alg *alg);
+
+int crypto_init_spawn(struct crypto_spawn *spawn, struct crypto_alg *alg,
+		      struct crypto_instance *inst, u32 mask);
+int crypto_init_spawn2(struct crypto_spawn *spawn, struct crypto_alg *alg,
+		       struct crypto_instance *inst,
+		       const struct crypto_type *frontend);
+
+void crypto_drop_spawn(struct crypto_spawn *spawn);
+struct crypto_tfm *crypto_spawn_tfm(struct crypto_spawn *spawn, u32 type,
+				    u32 mask);
+void *crypto_spawn_tfm2(struct crypto_spawn *spawn);
+
+static inline void crypto_set_spawn(struct crypto_spawn *spawn,
+				    struct crypto_instance *inst)
+{
+	spawn->inst = inst;
+}
+
+struct crypto_attr_type *crypto_get_attr_type(struct rtattr **tb);
+int crypto_check_attr_type(struct rtattr **tb, u32 type);
+const char *crypto_attr_alg_name(struct rtattr *rta);
+struct crypto_alg *crypto_attr_alg2(struct rtattr *rta,
+				    const struct crypto_type *frontend,
+				    u32 type, u32 mask);
+
+static inline struct crypto_alg *crypto_attr_alg(struct rtattr *rta,
+						 u32 type, u32 mask)
+{
+	return crypto_attr_alg2(rta, NULL, type, mask);
+}
+
+int crypto_attr_u32(struct rtattr *rta, u32 *num);
+void *crypto_alloc_instance2(const char *name, struct crypto_alg *alg,
+			     unsigned int head);
+struct crypto_instance *crypto_alloc_instance(const char *name,
+					      struct crypto_alg *alg);
+
+void crypto_init_queue(struct crypto_queue *queue, unsigned int max_qlen);
+int crypto_enqueue_request(struct crypto_queue *queue,
+			   struct crypto_async_request *request);
+void *__crypto_dequeue_request(struct crypto_queue *queue, unsigned int offset);
+struct crypto_async_request *crypto_dequeue_request(struct crypto_queue *queue);
+int crypto_tfm_in_queue(struct crypto_queue *queue, struct crypto_tfm *tfm);
+
+/* These functions require the input/output to be aligned as u32. */
+void crypto_inc(u8 *a, unsigned int size);
+void crypto_xor(u8 *dst, const u8 *src, unsigned int size);
+
+int blkcipher_walk_done(struct blkcipher_desc *desc,
+			struct blkcipher_walk *walk, int err);
+int blkcipher_walk_virt(struct blkcipher_desc *desc,
+			struct blkcipher_walk *walk);
+int blkcipher_walk_phys(struct blkcipher_desc *desc,
+			struct blkcipher_walk *walk);
+int blkcipher_walk_virt_block(struct blkcipher_desc *desc,
+			      struct blkcipher_walk *walk,
+			      unsigned int blocksize);
+
+int ablkcipher_walk_done(struct ablkcipher_request *req,
+			 struct ablkcipher_walk *walk, int err);
+int ablkcipher_walk_phys(struct ablkcipher_request *req,
+			 struct ablkcipher_walk *walk);
+void __ablkcipher_walk_complete(struct ablkcipher_walk *walk);
+
+static inline void *crypto_tfm_ctx_aligned(struct crypto_tfm *tfm)
+{
+	return PTR_ALIGN(crypto_tfm_ctx(tfm),
+			 crypto_tfm_alg_alignmask(tfm) + 1);
+}
+
+static inline struct crypto_instance *crypto_tfm_alg_instance(
+	struct crypto_tfm *tfm)
+{
+	return container_of(tfm->__crt_alg, struct crypto_instance, alg);
+}
+
+static inline void *crypto_instance_ctx(struct crypto_instance *inst)
+{
+	return inst->__ctx;
+}
+
+static inline struct ablkcipher_alg *crypto_ablkcipher_alg(
+	struct crypto_ablkcipher *tfm)
+{
+	return &crypto_ablkcipher_tfm(tfm)->__crt_alg->cra_ablkcipher;
+}
+
+static inline void *crypto_ablkcipher_ctx(struct crypto_ablkcipher *tfm)
+{
+	return crypto_tfm_ctx(&tfm->base);
+}
+
+static inline void *crypto_ablkcipher_ctx_aligned(struct crypto_ablkcipher *tfm)
+{
+	return crypto_tfm_ctx_aligned(&tfm->base);
+}
+
+static inline struct aead_alg *crypto_aead_alg(struct crypto_aead *tfm)
+{
+	return &crypto_aead_tfm(tfm)->__crt_alg->cra_aead;
+}
+
+static inline void *crypto_aead_ctx(struct crypto_aead *tfm)
+{
+	return crypto_tfm_ctx(&tfm->base);
+}
+
+static inline struct crypto_instance *crypto_aead_alg_instance(
+	struct crypto_aead *aead)
+{
+	return crypto_tfm_alg_instance(&aead->base);
+}
+
+static inline struct crypto_blkcipher *crypto_spawn_blkcipher(
+	struct crypto_spawn *spawn)
+{
+	u32 type = CRYPTO_ALG_TYPE_BLKCIPHER;
+	u32 mask = CRYPTO_ALG_TYPE_MASK;
+
+	return __crypto_blkcipher_cast(crypto_spawn_tfm(spawn, type, mask));
+}
+
+static inline void *crypto_blkcipher_ctx(struct crypto_blkcipher *tfm)
+{
+	return crypto_tfm_ctx(&tfm->base);
+}
+
+static inline void *crypto_blkcipher_ctx_aligned(struct crypto_blkcipher *tfm)
+{
+	return crypto_tfm_ctx_aligned(&tfm->base);
+}
+
+static inline struct crypto_cipher *crypto_spawn_cipher(
+	struct crypto_spawn *spawn)
+{
+	u32 type = CRYPTO_ALG_TYPE_CIPHER;
+	u32 mask = CRYPTO_ALG_TYPE_MASK;
+
+	return __crypto_cipher_cast(crypto_spawn_tfm(spawn, type, mask));
+}
+
+static inline struct cipher_alg *crypto_cipher_alg(struct crypto_cipher *tfm)
+{
+	return &crypto_cipher_tfm(tfm)->__crt_alg->cra_cipher;
+}
+
+static inline struct crypto_hash *crypto_spawn_hash(struct crypto_spawn *spawn)
+{
+	u32 type = CRYPTO_ALG_TYPE_HASH;
+	u32 mask = CRYPTO_ALG_TYPE_HASH_MASK;
+
+	return __crypto_hash_cast(crypto_spawn_tfm(spawn, type, mask));
+}
+
+static inline void *crypto_hash_ctx(struct crypto_hash *tfm)
+{
+	return crypto_tfm_ctx(&tfm->base);
+}
+
+static inline void *crypto_hash_ctx_aligned(struct crypto_hash *tfm)
+{
+	return crypto_tfm_ctx_aligned(&tfm->base);
+}
+
+static inline void blkcipher_walk_init(struct blkcipher_walk *walk,
+				       struct scatterlist *dst,
+				       struct scatterlist *src,
+				       unsigned int nbytes)
+{
+	walk->in.sg = src;
+	walk->out.sg = dst;
+	walk->total = nbytes;
+}
+
+static inline void ablkcipher_walk_init(struct ablkcipher_walk *walk,
+					struct scatterlist *dst,
+					struct scatterlist *src,
+					unsigned int nbytes)
+{
+	walk->in.sg = src;
+	walk->out.sg = dst;
+	walk->total = nbytes;
+	INIT_LIST_HEAD(&walk->buffers);
+}
+
+static inline void ablkcipher_walk_complete(struct ablkcipher_walk *walk)
+{
+	if (unlikely(!list_empty(&walk->buffers)))
+		__ablkcipher_walk_complete(walk);
+}
+
+static inline struct crypto_async_request *crypto_get_backlog(
+	struct crypto_queue *queue)
+{
+	return queue->backlog == &queue->list ? NULL :
+	       container_of(queue->backlog, struct crypto_async_request, list);
+}
+
+static inline int ablkcipher_enqueue_request(struct crypto_queue *queue,
+					     struct ablkcipher_request *request)
+{
+	return crypto_enqueue_request(queue, &request->base);
+}
+
+static inline struct ablkcipher_request *ablkcipher_dequeue_request(
+	struct crypto_queue *queue)
+{
+	return ablkcipher_request_cast(crypto_dequeue_request(queue));
+}
+
+static inline void *ablkcipher_request_ctx(struct ablkcipher_request *req)
+{
+	return req->__ctx;
+}
+
+static inline int ablkcipher_tfm_in_queue(struct crypto_queue *queue,
+					  struct crypto_ablkcipher *tfm)
+{
+	return crypto_tfm_in_queue(queue, crypto_ablkcipher_tfm(tfm));
+}
+
+static inline void *aead_request_ctx(struct aead_request *req)
+{
+	return req->__ctx;
+}
+
+static inline void aead_request_complete(struct aead_request *req, int err)
+{
+	req->base.complete(&req->base, err);
+}
+
+static inline u32 aead_request_flags(struct aead_request *req)
+{
+	return req->base.flags;
+}
+
+static inline struct crypto_alg *crypto_get_attr_alg(struct rtattr **tb,
+						     u32 type, u32 mask)
+{
+	return crypto_attr_alg(tb[1], type, mask);
+}
+
+/*
+ * Returns CRYPTO_ALG_ASYNC if type/mask requires the use of sync algorithms.
+ * Otherwise returns zero.
+ */
+static inline int crypto_requires_sync(u32 type, u32 mask)
+{
+	return (type ^ CRYPTO_ALG_ASYNC) & mask & CRYPTO_ALG_ASYNC;
+}
+
+#endif	/* _CRYPTO_ALGAPI_H */
+
diff --git a/include/crypto/authenc.h b/include/crypto/authenc.h
new file mode 100644
index 00000000..e47b0449
--- /dev/null
+++ b/include/crypto/authenc.h
@@ -0,0 +1,27 @@
+/*
+ * Authenc: Simple AEAD wrapper for IPsec
+ *
+ * Copyright (c) 2007 Herbert Xu <herbert@gondor.apana.org.au>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+#ifndef _CRYPTO_AUTHENC_H
+#define _CRYPTO_AUTHENC_H
+
+#include <linux/types.h>
+
+enum {
+	CRYPTO_AUTHENC_KEYA_UNSPEC,
+	CRYPTO_AUTHENC_KEYA_PARAM,
+};
+
+struct crypto_authenc_key_param {
+	__be32 enckeylen;
+};
+
+#endif	/* _CRYPTO_AUTHENC_H */
+
diff --git a/include/crypto/b128ops.h b/include/crypto/b128ops.h
new file mode 100644
index 00000000..0b8e6bc5
--- /dev/null
+++ b/include/crypto/b128ops.h
@@ -0,0 +1,80 @@
+/* b128ops.h - common 128-bit block operations
+ *
+ * Copyright (c) 2003, Dr Brian Gladman, Worcester, UK.
+ * Copyright (c) 2006, Rik Snel <rsnel@cube.dyndns.org>
+ *
+ * Based on Dr Brian Gladman's (GPL'd) work published at
+ * http://fp.gladman.plus.com/cryptography_technology/index.htm
+ * See the original copyright notice below.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+/*
+ ---------------------------------------------------------------------------
+ Copyright (c) 2003, Dr Brian Gladman, Worcester, UK.   All rights reserved.
+
+ LICENSE TERMS
+
+ The free distribution and use of this software in both source and binary
+ form is allowed (with or without changes) provided that:
+
+   1. distributions of this source code include the above copyright
+      notice, this list of conditions and the following disclaimer;
+
+   2. distributions in binary form include the above copyright
+      notice, this list of conditions and the following disclaimer
+      in the documentation and/or other associated materials;
+
+   3. the copyright holder's name is not used to endorse products
+      built using this software without specific written permission.
+
+ ALTERNATIVELY, provided that this notice is retained in full, this product
+ may be distributed under the terms of the GNU General Public License (GPL),
+ in which case the provisions of the GPL apply INSTEAD OF those given above.
+
+ DISCLAIMER
+
+ This software is provided 'as is' with no explicit or implied warranties
+ in respect of its properties, including, but not limited to, correctness
+ and/or fitness for purpose.
+ ---------------------------------------------------------------------------
+ Issue Date: 13/06/2006
+*/
+
+#ifndef _CRYPTO_B128OPS_H
+#define _CRYPTO_B128OPS_H
+
+#include <linux/types.h>
+
+typedef struct {
+	u64 a, b;
+} u128;
+
+typedef struct {
+	__be64 a, b;
+} be128;
+
+typedef struct {
+	__le64 b, a;
+} le128;
+
+static inline void u128_xor(u128 *r, const u128 *p, const u128 *q)
+{
+	r->a = p->a ^ q->a;
+	r->b = p->b ^ q->b;
+}
+
+static inline void be128_xor(be128 *r, const be128 *p, const be128 *q)
+{
+	u128_xor((u128 *)r, (u128 *)p, (u128 *)q);
+}
+
+static inline void le128_xor(le128 *r, const le128 *p, const le128 *q)
+{
+	u128_xor((u128 *)r, (u128 *)p, (u128 *)q);
+}
+
+#endif /* _CRYPTO_B128OPS_H */
diff --git a/include/crypto/blowfish.h b/include/crypto/blowfish.h
new file mode 100644
index 00000000..1450d4a2
--- /dev/null
+++ b/include/crypto/blowfish.h
@@ -0,0 +1,23 @@
+/*
+ * Common values for blowfish algorithms
+ */
+
+#ifndef _CRYPTO_BLOWFISH_H
+#define _CRYPTO_BLOWFISH_H
+
+#include <linux/types.h>
+#include <linux/crypto.h>
+
+#define BF_BLOCK_SIZE 8
+#define BF_MIN_KEY_SIZE 4
+#define BF_MAX_KEY_SIZE 56
+
+struct bf_ctx {
+	u32 p[18];
+	u32 s[1024];
+};
+
+int blowfish_setkey(struct crypto_tfm *tfm, const u8 *key,
+		    unsigned int key_len);
+
+#endif
diff --git a/include/crypto/compress.h b/include/crypto/compress.h
new file mode 100644
index 00000000..86163ef2
--- /dev/null
+++ b/include/crypto/compress.h
@@ -0,0 +1,145 @@
+/*
+ * Compress: Compression algorithms under the cryptographic API.
+ *
+ * Copyright 2008 Sony Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _CRYPTO_COMPRESS_H
+#define _CRYPTO_COMPRESS_H
+
+#include <linux/crypto.h>
+
+
+struct comp_request {
+	const void *next_in;		/* next input byte */
+	void *next_out;			/* next output byte */
+	unsigned int avail_in;		/* bytes available at next_in */
+	unsigned int avail_out;		/* bytes available at next_out */
+};
+
+enum zlib_comp_params {
+	ZLIB_COMP_LEVEL = 1,		/* e.g. Z_DEFAULT_COMPRESSION */
+	ZLIB_COMP_METHOD,		/* e.g. Z_DEFLATED */
+	ZLIB_COMP_WINDOWBITS,		/* e.g. MAX_WBITS */
+	ZLIB_COMP_MEMLEVEL,		/* e.g. DEF_MEM_LEVEL */
+	ZLIB_COMP_STRATEGY,		/* e.g. Z_DEFAULT_STRATEGY */
+	__ZLIB_COMP_MAX,
+};
+
+#define ZLIB_COMP_MAX	(__ZLIB_COMP_MAX - 1)
+
+
+enum zlib_decomp_params {
+	ZLIB_DECOMP_WINDOWBITS = 1,	/* e.g. DEF_WBITS */
+	__ZLIB_DECOMP_MAX,
+};
+
+#define ZLIB_DECOMP_MAX	(__ZLIB_DECOMP_MAX - 1)
+
+
+struct crypto_pcomp {
+	struct crypto_tfm base;
+};
+
+struct pcomp_alg {
+	int (*compress_setup)(struct crypto_pcomp *tfm, void *params,
+			      unsigned int len);
+	int (*compress_init)(struct crypto_pcomp *tfm);
+	int (*compress_update)(struct crypto_pcomp *tfm,
+			       struct comp_request *req);
+	int (*compress_final)(struct crypto_pcomp *tfm,
+			      struct comp_request *req);
+	int (*decompress_setup)(struct crypto_pcomp *tfm, void *params,
+				unsigned int len);
+	int (*decompress_init)(struct crypto_pcomp *tfm);
+	int (*decompress_update)(struct crypto_pcomp *tfm,
+				 struct comp_request *req);
+	int (*decompress_final)(struct crypto_pcomp *tfm,
+				struct comp_request *req);
+
+	struct crypto_alg base;
+};
+
+extern struct crypto_pcomp *crypto_alloc_pcomp(const char *alg_name, u32 type,
+					       u32 mask);
+
+static inline struct crypto_tfm *crypto_pcomp_tfm(struct crypto_pcomp *tfm)
+{
+	return &tfm->base;
+}
+
+static inline void crypto_free_pcomp(struct crypto_pcomp *tfm)
+{
+	crypto_destroy_tfm(tfm, crypto_pcomp_tfm(tfm));
+}
+
+static inline struct pcomp_alg *__crypto_pcomp_alg(struct crypto_alg *alg)
+{
+	return container_of(alg, struct pcomp_alg, base);
+}
+
+static inline struct pcomp_alg *crypto_pcomp_alg(struct crypto_pcomp *tfm)
+{
+	return __crypto_pcomp_alg(crypto_pcomp_tfm(tfm)->__crt_alg);
+}
+
+static inline int crypto_compress_setup(struct crypto_pcomp *tfm,
+					void *params, unsigned int len)
+{
+	return crypto_pcomp_alg(tfm)->compress_setup(tfm, params, len);
+}
+
+static inline int crypto_compress_init(struct crypto_pcomp *tfm)
+{
+	return crypto_pcomp_alg(tfm)->compress_init(tfm);
+}
+
+static inline int crypto_compress_update(struct crypto_pcomp *tfm,
+					 struct comp_request *req)
+{
+	return crypto_pcomp_alg(tfm)->compress_update(tfm, req);
+}
+
+static inline int crypto_compress_final(struct crypto_pcomp *tfm,
+					struct comp_request *req)
+{
+	return crypto_pcomp_alg(tfm)->compress_final(tfm, req);
+}
+
+static inline int crypto_decompress_setup(struct crypto_pcomp *tfm,
+					  void *params, unsigned int len)
+{
+	return crypto_pcomp_alg(tfm)->decompress_setup(tfm, params, len);
+}
+
+static inline int crypto_decompress_init(struct crypto_pcomp *tfm)
+{
+	return crypto_pcomp_alg(tfm)->decompress_init(tfm);
+}
+
+static inline int crypto_decompress_update(struct crypto_pcomp *tfm,
+					   struct comp_request *req)
+{
+	return crypto_pcomp_alg(tfm)->decompress_update(tfm, req);
+}
+
+static inline int crypto_decompress_final(struct crypto_pcomp *tfm,
+					  struct comp_request *req)
+{
+	return crypto_pcomp_alg(tfm)->decompress_final(tfm, req);
+}
+
+#endif	/* _CRYPTO_COMPRESS_H */
diff --git a/include/crypto/cryptd.h b/include/crypto/cryptd.h
new file mode 100644
index 00000000..ba98918b
--- /dev/null
+++ b/include/crypto/cryptd.h
@@ -0,0 +1,69 @@
+/*
+ * Software async crypto daemon
+ *
+ * Added AEAD support to cryptd.
+ *    Authors: Tadeusz Struk (tadeusz.struk@intel.com)
+ *             Adrian Hoban <adrian.hoban@intel.com>
+ *             Gabriele Paoloni <gabriele.paoloni@intel.com>
+ *             Aidan O'Mahony (aidan.o.mahony@intel.com)
+ *    Copyright (c) 2010, Intel Corporation.
+ */
+
+#ifndef _CRYPTO_CRYPT_H
+#define _CRYPTO_CRYPT_H
+
+#include <linux/crypto.h>
+#include <linux/kernel.h>
+#include <crypto/hash.h>
+
+struct cryptd_ablkcipher {
+	struct crypto_ablkcipher base;
+};
+
+static inline struct cryptd_ablkcipher *__cryptd_ablkcipher_cast(
+	struct crypto_ablkcipher *tfm)
+{
+	return (struct cryptd_ablkcipher *)tfm;
+}
+
+/* alg_name should be algorithm to be cryptd-ed */
+struct cryptd_ablkcipher *cryptd_alloc_ablkcipher(const char *alg_name,
+						  u32 type, u32 mask);
+struct crypto_blkcipher *cryptd_ablkcipher_child(struct cryptd_ablkcipher *tfm);
+void cryptd_free_ablkcipher(struct cryptd_ablkcipher *tfm);
+
+struct cryptd_ahash {
+	struct crypto_ahash base;
+};
+
+static inline struct cryptd_ahash *__cryptd_ahash_cast(
+	struct crypto_ahash *tfm)
+{
+	return (struct cryptd_ahash *)tfm;
+}
+
+/* alg_name should be algorithm to be cryptd-ed */
+struct cryptd_ahash *cryptd_alloc_ahash(const char *alg_name,
+					u32 type, u32 mask);
+struct crypto_shash *cryptd_ahash_child(struct cryptd_ahash *tfm);
+struct shash_desc *cryptd_shash_desc(struct ahash_request *req);
+void cryptd_free_ahash(struct cryptd_ahash *tfm);
+
+struct cryptd_aead {
+	struct crypto_aead base;
+};
+
+static inline struct cryptd_aead *__cryptd_aead_cast(
+	struct crypto_aead *tfm)
+{
+	return (struct cryptd_aead *)tfm;
+}
+
+struct cryptd_aead *cryptd_alloc_aead(const char *alg_name,
+					  u32 type, u32 mask);
+
+struct crypto_aead *cryptd_aead_child(struct cryptd_aead *tfm);
+
+void cryptd_free_aead(struct cryptd_aead *tfm);
+
+#endif
diff --git a/include/crypto/crypto_wq.h b/include/crypto/crypto_wq.h
new file mode 100644
index 00000000..a7d252da
--- /dev/null
+++ b/include/crypto/crypto_wq.h
@@ -0,0 +1,7 @@
+#ifndef CRYPTO_WQ_H
+#define CRYPTO_WQ_H
+
+#include <linux/workqueue.h>
+
+extern struct workqueue_struct *kcrypto_wq;
+#endif
diff --git a/include/crypto/ctr.h b/include/crypto/ctr.h
new file mode 100644
index 00000000..4180fc08
--- /dev/null
+++ b/include/crypto/ctr.h
@@ -0,0 +1,20 @@
+/*
+ * CTR: Counter mode
+ *
+ * Copyright (c) 2007 Herbert Xu <herbert@gondor.apana.org.au>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+
+#ifndef _CRYPTO_CTR_H
+#define _CRYPTO_CTR_H
+
+#define CTR_RFC3686_NONCE_SIZE 4
+#define CTR_RFC3686_IV_SIZE 8
+#define CTR_RFC3686_BLOCK_SIZE 16
+
+#endif  /* _CRYPTO_CTR_H */
diff --git a/include/crypto/des.h b/include/crypto/des.h
new file mode 100644
index 00000000..2971c630
--- /dev/null
+++ b/include/crypto/des.h
@@ -0,0 +1,19 @@
+/* 
+ * DES & Triple DES EDE Cipher Algorithms.
+ */
+
+#ifndef __CRYPTO_DES_H
+#define __CRYPTO_DES_H
+
+#define DES_KEY_SIZE		8
+#define DES_EXPKEY_WORDS	32
+#define DES_BLOCK_SIZE		8
+
+#define DES3_EDE_KEY_SIZE	(3 * DES_KEY_SIZE)
+#define DES3_EDE_EXPKEY_WORDS	(3 * DES_EXPKEY_WORDS)
+#define DES3_EDE_BLOCK_SIZE	DES_BLOCK_SIZE
+
+
+extern unsigned long des_ekey(u32 *pe, const u8 *k);
+
+#endif /* __CRYPTO_DES_H */
diff --git a/include/crypto/gf128mul.h b/include/crypto/gf128mul.h
new file mode 100644
index 00000000..da2530e3
--- /dev/null
+++ b/include/crypto/gf128mul.h
@@ -0,0 +1,200 @@
+/* gf128mul.h - GF(2^128) multiplication functions
+ *
+ * Copyright (c) 2003, Dr Brian Gladman, Worcester, UK.
+ * Copyright (c) 2006 Rik Snel <rsnel@cube.dyndns.org>
+ *
+ * Based on Dr Brian Gladman's (GPL'd) work published at
+ * http://fp.gladman.plus.com/cryptography_technology/index.htm
+ * See the original copyright notice below.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+/*
+ ---------------------------------------------------------------------------
+ Copyright (c) 2003, Dr Brian Gladman, Worcester, UK.   All rights reserved.
+
+ LICENSE TERMS
+
+ The free distribution and use of this software in both source and binary
+ form is allowed (with or without changes) provided that:
+
+   1. distributions of this source code include the above copyright
+      notice, this list of conditions and the following disclaimer;
+
+   2. distributions in binary form include the above copyright
+      notice, this list of conditions and the following disclaimer
+      in the documentation and/or other associated materials;
+
+   3. the copyright holder's name is not used to endorse products
+      built using this software without specific written permission.
+
+ ALTERNATIVELY, provided that this notice is retained in full, this product
+ may be distributed under the terms of the GNU General Public License (GPL),
+ in which case the provisions of the GPL apply INSTEAD OF those given above.
+
+ DISCLAIMER
+
+ This software is provided 'as is' with no explicit or implied warranties
+ in respect of its properties, including, but not limited to, correctness
+ and/or fitness for purpose.
+ ---------------------------------------------------------------------------
+ Issue Date: 31/01/2006
+
+ An implementation of field multiplication in Galois Field GF(128)
+*/
+
+#ifndef _CRYPTO_GF128MUL_H
+#define _CRYPTO_GF128MUL_H
+
+#include <crypto/b128ops.h>
+#include <linux/slab.h>
+
+/* Comment by Rik:
+ *
+ * For some background on GF(2^128) see for example: 
+ * http://csrc.nist.gov/groups/ST/toolkit/BCM/documents/proposedmodes/gcm/gcm-revised-spec.pdf 
+ *
+ * The elements of GF(2^128) := GF(2)[X]/(X^128-X^7-X^2-X^1-1) can
+ * be mapped to computer memory in a variety of ways. Let's examine
+ * three common cases.
+ *
+ * Take a look at the 16 binary octets below in memory order. The msb's
+ * are left and the lsb's are right. char b[16] is an array and b[0] is
+ * the first octet.
+ *
+ * 80000000 00000000 00000000 00000000 .... 00000000 00000000 00000000
+ *   b[0]     b[1]     b[2]     b[3]          b[13]    b[14]    b[15]
+ *
+ * Every bit is a coefficient of some power of X. We can store the bits
+ * in every byte in little-endian order and the bytes themselves also in
+ * little endian order. I will call this lle (little-little-endian).
+ * The above buffer represents the polynomial 1, and X^7+X^2+X^1+1 looks
+ * like 11100001 00000000 .... 00000000 = { 0xE1, 0x00, }.
+ * This format was originally implemented in gf128mul and is used
+ * in GCM (Galois/Counter mode) and in ABL (Arbitrary Block Length).
+ *
+ * Another convention says: store the bits in bigendian order and the
+ * bytes also. This is bbe (big-big-endian). Now the buffer above
+ * represents X^127. X^7+X^2+X^1+1 looks like 00000000 .... 10000111,
+ * b[15] = 0x87 and the rest is 0. LRW uses this convention and bbe
+ * is partly implemented.
+ *
+ * Both of the above formats are easy to implement on big-endian
+ * machines.
+ *
+ * EME (which is patent encumbered) uses the ble format (bits are stored
+ * in big endian order and the bytes in little endian). The above buffer
+ * represents X^7 in this case and the primitive polynomial is b[0] = 0x87.
+ *
+ * The common machine word-size is smaller than 128 bits, so to make
+ * an efficient implementation we must split into machine word sizes.
+ * This file uses one 32bit for the moment. Machine endianness comes into
+ * play. The lle format in relation to machine endianness is discussed
+ * below by the original author of gf128mul Dr Brian Gladman.
+ *
+ * Let's look at the bbe and ble format on a little endian machine.
+ *
+ * bbe on a little endian machine u32 x[4]:
+ *
+ *  MS            x[0]           LS  MS            x[1]		  LS
+ *  ms   ls ms   ls ms   ls ms   ls  ms   ls ms   ls ms   ls ms   ls
+ *  103..96 111.104 119.112 127.120  71...64 79...72 87...80 95...88
+ *
+ *  MS            x[2]           LS  MS            x[3]		  LS
+ *  ms   ls ms   ls ms   ls ms   ls  ms   ls ms   ls ms   ls ms   ls
+ *  39...32 47...40 55...48 63...56  07...00 15...08 23...16 31...24
+ *
+ * ble on a little endian machine
+ *
+ *  MS            x[0]           LS  MS            x[1]		  LS
+ *  ms   ls ms   ls ms   ls ms   ls  ms   ls ms   ls ms   ls ms   ls
+ *  31...24 23...16 15...08 07...00  63...56 55...48 47...40 39...32
+ *
+ *  MS            x[2]           LS  MS            x[3]		  LS
+ *  ms   ls ms   ls ms   ls ms   ls  ms   ls ms   ls ms   ls ms   ls
+ *  95...88 87...80 79...72 71...64  127.120 199.112 111.104 103..96
+ *
+ * Multiplications in GF(2^128) are mostly bit-shifts, so you see why
+ * ble (and lbe also) are easier to implement on a little-endian
+ * machine than on a big-endian machine. The converse holds for bbe
+ * and lle.
+ *
+ * Note: to have good alignment, it seems to me that it is sufficient
+ * to keep elements of GF(2^128) in type u64[2]. On 32-bit wordsize
+ * machines this will automatically aligned to wordsize and on a 64-bit
+ * machine also.
+ */
+/*	Multiply a GF128 field element by x. Field elements are held in arrays
+    of bytes in which field bits 8n..8n + 7 are held in byte[n], with lower
+    indexed bits placed in the more numerically significant bit positions
+    within bytes.
+
+    On little endian machines the bit indexes translate into the bit
+    positions within four 32-bit words in the following way
+
+    MS            x[0]           LS  MS            x[1]		  LS
+    ms   ls ms   ls ms   ls ms   ls  ms   ls ms   ls ms   ls ms   ls
+    24...31 16...23 08...15 00...07  56...63 48...55 40...47 32...39
+
+    MS            x[2]           LS  MS            x[3]		  LS
+    ms   ls ms   ls ms   ls ms   ls  ms   ls ms   ls ms   ls ms   ls
+    88...95 80...87 72...79 64...71  120.127 112.119 104.111 96..103
+
+    On big endian machines the bit indexes translate into the bit
+    positions within four 32-bit words in the following way
+
+    MS            x[0]           LS  MS            x[1]		  LS
+    ms   ls ms   ls ms   ls ms   ls  ms   ls ms   ls ms   ls ms   ls
+    00...07 08...15 16...23 24...31  32...39 40...47 48...55 56...63
+
+    MS            x[2]           LS  MS            x[3]		  LS
+    ms   ls ms   ls ms   ls ms   ls  ms   ls ms   ls ms   ls ms   ls
+    64...71 72...79 80...87 88...95  96..103 104.111 112.119 120.127
+*/
+
+/*	A slow generic version of gf_mul, implemented for lle and bbe
+ * 	It multiplies a and b and puts the result in a */
+void gf128mul_lle(be128 *a, const be128 *b);
+
+void gf128mul_bbe(be128 *a, const be128 *b);
+
+/* multiply by x in ble format, needed by XTS */
+void gf128mul_x_ble(be128 *a, const be128 *b);
+
+/* 4k table optimization */
+
+struct gf128mul_4k {
+	be128 t[256];
+};
+
+struct gf128mul_4k *gf128mul_init_4k_lle(const be128 *g);
+struct gf128mul_4k *gf128mul_init_4k_bbe(const be128 *g);
+void gf128mul_4k_lle(be128 *a, struct gf128mul_4k *t);
+void gf128mul_4k_bbe(be128 *a, struct gf128mul_4k *t);
+
+static inline void gf128mul_free_4k(struct gf128mul_4k *t)
+{
+	kfree(t);
+}
+
+
+/* 64k table optimization, implemented for lle and bbe */
+
+struct gf128mul_64k {
+	struct gf128mul_4k *t[16];
+};
+
+/* first initialize with the constant factor with which you
+ * want to multiply and then call gf128_64k_lle with the other
+ * factor in the first argument, the table in the second and a
+ * scratch register in the third. Afterwards *a = *r. */
+struct gf128mul_64k *gf128mul_init_64k_lle(const be128 *g);
+struct gf128mul_64k *gf128mul_init_64k_bbe(const be128 *g);
+void gf128mul_free_64k(struct gf128mul_64k *t);
+void gf128mul_64k_lle(be128 *a, struct gf128mul_64k *t);
+void gf128mul_64k_bbe(be128 *a, struct gf128mul_64k *t);
+
+#endif /* _CRYPTO_GF128MUL_H */
diff --git a/include/crypto/hash.h b/include/crypto/hash.h
new file mode 100644
index 00000000..26cb1eb1
--- /dev/null
+++ b/include/crypto/hash.h
@@ -0,0 +1,353 @@
+/*
+ * Hash: Hash algorithms under the crypto API
+ * 
+ * Copyright (c) 2008 Herbert Xu <herbert@gondor.apana.org.au>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option) 
+ * any later version.
+ *
+ */
+
+#ifndef _CRYPTO_HASH_H
+#define _CRYPTO_HASH_H
+
+#include <linux/crypto.h>
+
+struct crypto_ahash;
+
+struct hash_alg_common {
+	unsigned int digestsize;
+	unsigned int statesize;
+
+	struct crypto_alg base;
+};
+
+struct ahash_request {
+	struct crypto_async_request base;
+
+	unsigned int nbytes;
+	struct scatterlist *src;
+	u8 *result;
+
+	/* This field may only be used by the ahash API code. */
+	void *priv;
+
+	void *__ctx[] CRYPTO_MINALIGN_ATTR;
+};
+
+struct ahash_alg {
+	int (*init)(struct ahash_request *req);
+	int (*update)(struct ahash_request *req);
+	int (*final)(struct ahash_request *req);
+	int (*finup)(struct ahash_request *req);
+	int (*digest)(struct ahash_request *req);
+	int (*export)(struct ahash_request *req, void *out);
+	int (*import)(struct ahash_request *req, const void *in);
+	int (*setkey)(struct crypto_ahash *tfm, const u8 *key,
+		      unsigned int keylen);
+
+	struct hash_alg_common halg;
+};
+
+struct shash_desc {
+	struct crypto_shash *tfm;
+	u32 flags;
+
+	void *__ctx[] CRYPTO_MINALIGN_ATTR;
+};
+
+struct shash_alg {
+	int (*init)(struct shash_desc *desc);
+	int (*update)(struct shash_desc *desc, const u8 *data,
+		      unsigned int len);
+	int (*final)(struct shash_desc *desc, u8 *out);
+	int (*finup)(struct shash_desc *desc, const u8 *data,
+		     unsigned int len, u8 *out);
+	int (*digest)(struct shash_desc *desc, const u8 *data,
+		      unsigned int len, u8 *out);
+	int (*export)(struct shash_desc *desc, void *out);
+	int (*import)(struct shash_desc *desc, const void *in);
+	int (*setkey)(struct crypto_shash *tfm, const u8 *key,
+		      unsigned int keylen);
+
+	unsigned int descsize;
+
+	/* These fields must match hash_alg_common. */
+	unsigned int digestsize
+		__attribute__ ((aligned(__alignof__(struct hash_alg_common))));
+	unsigned int statesize;
+
+	struct crypto_alg base;
+};
+
+struct crypto_ahash {
+	int (*init)(struct ahash_request *req);
+	int (*update)(struct ahash_request *req);
+	int (*final)(struct ahash_request *req);
+	int (*finup)(struct ahash_request *req);
+	int (*digest)(struct ahash_request *req);
+	int (*export)(struct ahash_request *req, void *out);
+	int (*import)(struct ahash_request *req, const void *in);
+	int (*setkey)(struct crypto_ahash *tfm, const u8 *key,
+		      unsigned int keylen);
+
+	unsigned int reqsize;
+	struct crypto_tfm base;
+};
+
+struct crypto_shash {
+	unsigned int descsize;
+	struct crypto_tfm base;
+};
+
+static inline struct crypto_ahash *__crypto_ahash_cast(struct crypto_tfm *tfm)
+{
+	return container_of(tfm, struct crypto_ahash, base);
+}
+
+struct crypto_ahash *crypto_alloc_ahash(const char *alg_name, u32 type,
+					u32 mask);
+
+static inline struct crypto_tfm *crypto_ahash_tfm(struct crypto_ahash *tfm)
+{
+	return &tfm->base;
+}
+
+static inline void crypto_free_ahash(struct crypto_ahash *tfm)
+{
+	crypto_destroy_tfm(tfm, crypto_ahash_tfm(tfm));
+}
+
+static inline unsigned int crypto_ahash_alignmask(
+	struct crypto_ahash *tfm)
+{
+	return crypto_tfm_alg_alignmask(crypto_ahash_tfm(tfm));
+}
+
+static inline struct hash_alg_common *__crypto_hash_alg_common(
+	struct crypto_alg *alg)
+{
+	return container_of(alg, struct hash_alg_common, base);
+}
+
+static inline struct hash_alg_common *crypto_hash_alg_common(
+	struct crypto_ahash *tfm)
+{
+	return __crypto_hash_alg_common(crypto_ahash_tfm(tfm)->__crt_alg);
+}
+
+static inline unsigned int crypto_ahash_digestsize(struct crypto_ahash *tfm)
+{
+	return crypto_hash_alg_common(tfm)->digestsize;
+}
+
+static inline unsigned int crypto_ahash_statesize(struct crypto_ahash *tfm)
+{
+	return crypto_hash_alg_common(tfm)->statesize;
+}
+
+static inline u32 crypto_ahash_get_flags(struct crypto_ahash *tfm)
+{
+	return crypto_tfm_get_flags(crypto_ahash_tfm(tfm));
+}
+
+static inline void crypto_ahash_set_flags(struct crypto_ahash *tfm, u32 flags)
+{
+	crypto_tfm_set_flags(crypto_ahash_tfm(tfm), flags);
+}
+
+static inline void crypto_ahash_clear_flags(struct crypto_ahash *tfm, u32 flags)
+{
+	crypto_tfm_clear_flags(crypto_ahash_tfm(tfm), flags);
+}
+
+static inline struct crypto_ahash *crypto_ahash_reqtfm(
+	struct ahash_request *req)
+{
+	return __crypto_ahash_cast(req->base.tfm);
+}
+
+static inline unsigned int crypto_ahash_reqsize(struct crypto_ahash *tfm)
+{
+	return tfm->reqsize;
+}
+
+static inline void *ahash_request_ctx(struct ahash_request *req)
+{
+	return req->__ctx;
+}
+
+int crypto_ahash_setkey(struct crypto_ahash *tfm, const u8 *key,
+			unsigned int keylen);
+int crypto_ahash_finup(struct ahash_request *req);
+int crypto_ahash_final(struct ahash_request *req);
+int crypto_ahash_digest(struct ahash_request *req);
+
+static inline int crypto_ahash_export(struct ahash_request *req, void *out)
+{
+	return crypto_ahash_reqtfm(req)->export(req, out);
+}
+
+static inline int crypto_ahash_import(struct ahash_request *req, const void *in)
+{
+	return crypto_ahash_reqtfm(req)->import(req, in);
+}
+
+static inline int crypto_ahash_init(struct ahash_request *req)
+{
+	return crypto_ahash_reqtfm(req)->init(req);
+}
+
+static inline int crypto_ahash_update(struct ahash_request *req)
+{
+	return crypto_ahash_reqtfm(req)->update(req);
+}
+
+static inline void ahash_request_set_tfm(struct ahash_request *req,
+					 struct crypto_ahash *tfm)
+{
+	req->base.tfm = crypto_ahash_tfm(tfm);
+}
+
+static inline struct ahash_request *ahash_request_alloc(
+	struct crypto_ahash *tfm, gfp_t gfp)
+{
+	struct ahash_request *req;
+
+	req = kmalloc(sizeof(struct ahash_request) +
+		      crypto_ahash_reqsize(tfm), gfp);
+
+	if (likely(req))
+		ahash_request_set_tfm(req, tfm);
+
+	return req;
+}
+
+static inline void ahash_request_free(struct ahash_request *req)
+{
+	kzfree(req);
+}
+
+static inline struct ahash_request *ahash_request_cast(
+	struct crypto_async_request *req)
+{
+	return container_of(req, struct ahash_request, base);
+}
+
+static inline void ahash_request_set_callback(struct ahash_request *req,
+					      u32 flags,
+					      crypto_completion_t complete,
+					      void *data)
+{
+	req->base.complete = complete;
+	req->base.data = data;
+	req->base.flags = flags;
+}
+
+static inline void ahash_request_set_crypt(struct ahash_request *req,
+					   struct scatterlist *src, u8 *result,
+					   unsigned int nbytes)
+{
+	req->src = src;
+	req->nbytes = nbytes;
+	req->result = result;
+}
+
+struct crypto_shash *crypto_alloc_shash(const char *alg_name, u32 type,
+					u32 mask);
+
+static inline struct crypto_tfm *crypto_shash_tfm(struct crypto_shash *tfm)
+{
+	return &tfm->base;
+}
+
+static inline void crypto_free_shash(struct crypto_shash *tfm)
+{
+	crypto_destroy_tfm(tfm, crypto_shash_tfm(tfm));
+}
+
+static inline unsigned int crypto_shash_alignmask(
+	struct crypto_shash *tfm)
+{
+	return crypto_tfm_alg_alignmask(crypto_shash_tfm(tfm));
+}
+
+static inline unsigned int crypto_shash_blocksize(struct crypto_shash *tfm)
+{
+	return crypto_tfm_alg_blocksize(crypto_shash_tfm(tfm));
+}
+
+static inline struct shash_alg *__crypto_shash_alg(struct crypto_alg *alg)
+{
+	return container_of(alg, struct shash_alg, base);
+}
+
+static inline struct shash_alg *crypto_shash_alg(struct crypto_shash *tfm)
+{
+	return __crypto_shash_alg(crypto_shash_tfm(tfm)->__crt_alg);
+}
+
+static inline unsigned int crypto_shash_digestsize(struct crypto_shash *tfm)
+{
+	return crypto_shash_alg(tfm)->digestsize;
+}
+
+static inline unsigned int crypto_shash_statesize(struct crypto_shash *tfm)
+{
+	return crypto_shash_alg(tfm)->statesize;
+}
+
+static inline u32 crypto_shash_get_flags(struct crypto_shash *tfm)
+{
+	return crypto_tfm_get_flags(crypto_shash_tfm(tfm));
+}
+
+static inline void crypto_shash_set_flags(struct crypto_shash *tfm, u32 flags)
+{
+	crypto_tfm_set_flags(crypto_shash_tfm(tfm), flags);
+}
+
+static inline void crypto_shash_clear_flags(struct crypto_shash *tfm, u32 flags)
+{
+	crypto_tfm_clear_flags(crypto_shash_tfm(tfm), flags);
+}
+
+static inline unsigned int crypto_shash_descsize(struct crypto_shash *tfm)
+{
+	return tfm->descsize;
+}
+
+static inline void *shash_desc_ctx(struct shash_desc *desc)
+{
+	return desc->__ctx;
+}
+
+int crypto_shash_setkey(struct crypto_shash *tfm, const u8 *key,
+			unsigned int keylen);
+int crypto_shash_digest(struct shash_desc *desc, const u8 *data,
+			unsigned int len, u8 *out);
+
+static inline int crypto_shash_export(struct shash_desc *desc, void *out)
+{
+	return crypto_shash_alg(desc->tfm)->export(desc, out);
+}
+
+static inline int crypto_shash_import(struct shash_desc *desc, const void *in)
+{
+	return crypto_shash_alg(desc->tfm)->import(desc, in);
+}
+
+static inline int crypto_shash_init(struct shash_desc *desc)
+{
+	return crypto_shash_alg(desc->tfm)->init(desc);
+}
+
+int crypto_shash_update(struct shash_desc *desc, const u8 *data,
+			unsigned int len);
+int crypto_shash_final(struct shash_desc *desc, u8 *out);
+int crypto_shash_finup(struct shash_desc *desc, const u8 *data,
+		       unsigned int len, u8 *out);
+
+#endif	/* _CRYPTO_HASH_H */
diff --git a/include/crypto/if_alg.h b/include/crypto/if_alg.h
new file mode 100644
index 00000000..d61c1117
--- /dev/null
+++ b/include/crypto/if_alg.h
@@ -0,0 +1,93 @@
+/*
+ * if_alg: User-space algorithm interface
+ *
+ * Copyright (c) 2010 Herbert Xu <herbert@gondor.apana.org.au>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+
+#ifndef _CRYPTO_IF_ALG_H
+#define _CRYPTO_IF_ALG_H
+
+#include <linux/compiler.h>
+#include <linux/completion.h>
+#include <linux/if_alg.h>
+#include <linux/scatterlist.h>
+#include <linux/types.h>
+#include <net/sock.h>
+
+#define ALG_MAX_PAGES			16
+
+struct crypto_async_request;
+
+struct alg_sock {
+	/* struct sock must be the first member of struct alg_sock */
+	struct sock sk;
+
+	struct sock *parent;
+
+	const struct af_alg_type *type;
+	void *private;
+};
+
+struct af_alg_completion {
+	struct completion completion;
+	int err;
+};
+
+struct af_alg_control {
+	struct af_alg_iv *iv;
+	int op;
+};
+
+struct af_alg_type {
+	void *(*bind)(const char *name, u32 type, u32 mask);
+	void (*release)(void *private);
+	int (*setkey)(void *private, const u8 *key, unsigned int keylen);
+	int (*accept)(void *private, struct sock *sk);
+
+	struct proto_ops *ops;
+	struct module *owner;
+	char name[14];
+};
+
+struct af_alg_sgl {
+	struct scatterlist sg[ALG_MAX_PAGES];
+	struct page *pages[ALG_MAX_PAGES];
+};
+
+int af_alg_register_type(const struct af_alg_type *type);
+int af_alg_unregister_type(const struct af_alg_type *type);
+
+int af_alg_release(struct socket *sock);
+int af_alg_accept(struct sock *sk, struct socket *newsock);
+
+int af_alg_make_sg(struct af_alg_sgl *sgl, void __user *addr, int len,
+		   int write);
+void af_alg_free_sg(struct af_alg_sgl *sgl);
+
+int af_alg_cmsg_send(struct msghdr *msg, struct af_alg_control *con);
+
+int af_alg_wait_for_completion(int err, struct af_alg_completion *completion);
+void af_alg_complete(struct crypto_async_request *req, int err);
+
+static inline struct alg_sock *alg_sk(struct sock *sk)
+{
+	return (struct alg_sock *)sk;
+}
+
+static inline void af_alg_release_parent(struct sock *sk)
+{
+	sock_put(alg_sk(sk)->parent);
+}
+
+static inline void af_alg_init_completion(struct af_alg_completion *completion)
+{
+	init_completion(&completion->completion);
+}
+
+#endif	/* _CRYPTO_IF_ALG_H */
diff --git a/include/crypto/internal/aead.h b/include/crypto/internal/aead.h
new file mode 100644
index 00000000..2eba3402
--- /dev/null
+++ b/include/crypto/internal/aead.h
@@ -0,0 +1,82 @@
+/*
+ * AEAD: Authenticated Encryption with Associated Data
+ * 
+ * Copyright (c) 2007 Herbert Xu <herbert@gondor.apana.org.au>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option) 
+ * any later version.
+ *
+ */
+
+#ifndef _CRYPTO_INTERNAL_AEAD_H
+#define _CRYPTO_INTERNAL_AEAD_H
+
+#include <crypto/aead.h>
+#include <crypto/algapi.h>
+#include <linux/types.h>
+
+struct rtattr;
+
+struct crypto_aead_spawn {
+	struct crypto_spawn base;
+};
+
+extern const struct crypto_type crypto_nivaead_type;
+
+static inline void crypto_set_aead_spawn(
+	struct crypto_aead_spawn *spawn, struct crypto_instance *inst)
+{
+	crypto_set_spawn(&spawn->base, inst);
+}
+
+struct crypto_alg *crypto_lookup_aead(const char *name, u32 type, u32 mask);
+
+int crypto_grab_aead(struct crypto_aead_spawn *spawn, const char *name,
+		     u32 type, u32 mask);
+
+static inline void crypto_drop_aead(struct crypto_aead_spawn *spawn)
+{
+	crypto_drop_spawn(&spawn->base);
+}
+
+static inline struct crypto_alg *crypto_aead_spawn_alg(
+	struct crypto_aead_spawn *spawn)
+{
+	return spawn->base.alg;
+}
+
+static inline struct crypto_aead *crypto_spawn_aead(
+	struct crypto_aead_spawn *spawn)
+{
+	return __crypto_aead_cast(
+		crypto_spawn_tfm(&spawn->base, CRYPTO_ALG_TYPE_AEAD,
+				 CRYPTO_ALG_TYPE_MASK));
+}
+
+struct crypto_instance *aead_geniv_alloc(struct crypto_template *tmpl,
+					 struct rtattr **tb, u32 type,
+					 u32 mask);
+void aead_geniv_free(struct crypto_instance *inst);
+int aead_geniv_init(struct crypto_tfm *tfm);
+void aead_geniv_exit(struct crypto_tfm *tfm);
+
+static inline struct crypto_aead *aead_geniv_base(struct crypto_aead *geniv)
+{
+	return crypto_aead_crt(geniv)->base;
+}
+
+static inline void *aead_givcrypt_reqctx(struct aead_givcrypt_request *req)
+{
+	return aead_request_ctx(&req->areq);
+}
+
+static inline void aead_givcrypt_complete(struct aead_givcrypt_request *req,
+					  int err)
+{
+	aead_request_complete(&req->areq, err);
+}
+
+#endif	/* _CRYPTO_INTERNAL_AEAD_H */
+
diff --git a/include/crypto/internal/compress.h b/include/crypto/internal/compress.h
new file mode 100644
index 00000000..178a888d
--- /dev/null
+++ b/include/crypto/internal/compress.h
@@ -0,0 +1,28 @@
+/*
+ * Compress: Compression algorithms under the cryptographic API.
+ *
+ * Copyright 2008 Sony Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _CRYPTO_INTERNAL_COMPRESS_H
+#define _CRYPTO_INTERNAL_COMPRESS_H
+
+#include <crypto/compress.h>
+
+extern int crypto_register_pcomp(struct pcomp_alg *alg);
+extern int crypto_unregister_pcomp(struct pcomp_alg *alg);
+
+#endif	/* _CRYPTO_INTERNAL_COMPRESS_H */
diff --git a/include/crypto/internal/hash.h b/include/crypto/internal/hash.h
new file mode 100644
index 00000000..5bfad8c8
--- /dev/null
+++ b/include/crypto/internal/hash.h
@@ -0,0 +1,223 @@
+/*
+ * Hash algorithms.
+ * 
+ * Copyright (c) 2008 Herbert Xu <herbert@gondor.apana.org.au>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option) 
+ * any later version.
+ *
+ */
+
+#ifndef _CRYPTO_INTERNAL_HASH_H
+#define _CRYPTO_INTERNAL_HASH_H
+
+#include <crypto/algapi.h>
+#include <crypto/hash.h>
+
+struct ahash_request;
+struct scatterlist;
+
+struct crypto_hash_walk {
+	char *data;
+
+	unsigned int offset;
+	unsigned int alignmask;
+
+	struct page *pg;
+	unsigned int entrylen;
+
+	unsigned int total;
+	struct scatterlist *sg;
+
+	unsigned int flags;
+};
+
+struct ahash_instance {
+	struct ahash_alg alg;
+};
+
+struct shash_instance {
+	struct shash_alg alg;
+};
+
+struct crypto_ahash_spawn {
+	struct crypto_spawn base;
+};
+
+struct crypto_shash_spawn {
+	struct crypto_spawn base;
+};
+
+extern const struct crypto_type crypto_ahash_type;
+
+int crypto_hash_walk_done(struct crypto_hash_walk *walk, int err);
+int crypto_hash_walk_first(struct ahash_request *req,
+			   struct crypto_hash_walk *walk);
+int crypto_hash_walk_first_compat(struct hash_desc *hdesc,
+				  struct crypto_hash_walk *walk,
+				  struct scatterlist *sg, unsigned int len);
+
+static inline int crypto_hash_walk_last(struct crypto_hash_walk *walk)
+{
+	return !(walk->entrylen | walk->total);
+}
+
+int crypto_register_ahash(struct ahash_alg *alg);
+int crypto_unregister_ahash(struct ahash_alg *alg);
+int ahash_register_instance(struct crypto_template *tmpl,
+			    struct ahash_instance *inst);
+void ahash_free_instance(struct crypto_instance *inst);
+
+int crypto_init_ahash_spawn(struct crypto_ahash_spawn *spawn,
+			    struct hash_alg_common *alg,
+			    struct crypto_instance *inst);
+
+static inline void crypto_drop_ahash(struct crypto_ahash_spawn *spawn)
+{
+	crypto_drop_spawn(&spawn->base);
+}
+
+struct hash_alg_common *ahash_attr_alg(struct rtattr *rta, u32 type, u32 mask);
+
+int crypto_register_shash(struct shash_alg *alg);
+int crypto_unregister_shash(struct shash_alg *alg);
+int shash_register_instance(struct crypto_template *tmpl,
+			    struct shash_instance *inst);
+void shash_free_instance(struct crypto_instance *inst);
+
+int crypto_init_shash_spawn(struct crypto_shash_spawn *spawn,
+			    struct shash_alg *alg,
+			    struct crypto_instance *inst);
+
+static inline void crypto_drop_shash(struct crypto_shash_spawn *spawn)
+{
+	crypto_drop_spawn(&spawn->base);
+}
+
+struct shash_alg *shash_attr_alg(struct rtattr *rta, u32 type, u32 mask);
+
+int shash_ahash_update(struct ahash_request *req, struct shash_desc *desc);
+int shash_ahash_finup(struct ahash_request *req, struct shash_desc *desc);
+int shash_ahash_digest(struct ahash_request *req, struct shash_desc *desc);
+
+int crypto_init_shash_ops_async(struct crypto_tfm *tfm);
+
+static inline void *crypto_ahash_ctx(struct crypto_ahash *tfm)
+{
+	return crypto_tfm_ctx(crypto_ahash_tfm(tfm));
+}
+
+static inline struct ahash_alg *__crypto_ahash_alg(struct crypto_alg *alg)
+{
+	return container_of(__crypto_hash_alg_common(alg), struct ahash_alg,
+			    halg);
+}
+
+static inline void crypto_ahash_set_reqsize(struct crypto_ahash *tfm,
+					    unsigned int reqsize)
+{
+	tfm->reqsize = reqsize;
+}
+
+static inline struct crypto_instance *ahash_crypto_instance(
+	struct ahash_instance *inst)
+{
+	return container_of(&inst->alg.halg.base, struct crypto_instance, alg);
+}
+
+static inline struct ahash_instance *ahash_instance(
+	struct crypto_instance *inst)
+{
+	return container_of(&inst->alg, struct ahash_instance, alg.halg.base);
+}
+
+static inline void *ahash_instance_ctx(struct ahash_instance *inst)
+{
+	return crypto_instance_ctx(ahash_crypto_instance(inst));
+}
+
+static inline unsigned int ahash_instance_headroom(void)
+{
+	return sizeof(struct ahash_alg) - sizeof(struct crypto_alg);
+}
+
+static inline struct ahash_instance *ahash_alloc_instance(
+	const char *name, struct crypto_alg *alg)
+{
+	return crypto_alloc_instance2(name, alg, ahash_instance_headroom());
+}
+
+static inline struct crypto_ahash *crypto_spawn_ahash(
+	struct crypto_ahash_spawn *spawn)
+{
+	return crypto_spawn_tfm2(&spawn->base);
+}
+
+static inline int ahash_enqueue_request(struct crypto_queue *queue,
+					     struct ahash_request *request)
+{
+	return crypto_enqueue_request(queue, &request->base);
+}
+
+static inline struct ahash_request *ahash_dequeue_request(
+	struct crypto_queue *queue)
+{
+	return ahash_request_cast(crypto_dequeue_request(queue));
+}
+
+static inline int ahash_tfm_in_queue(struct crypto_queue *queue,
+					  struct crypto_ahash *tfm)
+{
+	return crypto_tfm_in_queue(queue, crypto_ahash_tfm(tfm));
+}
+
+static inline void *crypto_shash_ctx(struct crypto_shash *tfm)
+{
+	return crypto_tfm_ctx(&tfm->base);
+}
+
+static inline struct crypto_instance *shash_crypto_instance(
+	struct shash_instance *inst)
+{
+	return container_of(&inst->alg.base, struct crypto_instance, alg);
+}
+
+static inline struct shash_instance *shash_instance(
+	struct crypto_instance *inst)
+{
+	return container_of(__crypto_shash_alg(&inst->alg),
+			    struct shash_instance, alg);
+}
+
+static inline void *shash_instance_ctx(struct shash_instance *inst)
+{
+	return crypto_instance_ctx(shash_crypto_instance(inst));
+}
+
+static inline struct shash_instance *shash_alloc_instance(
+	const char *name, struct crypto_alg *alg)
+{
+	return crypto_alloc_instance2(name, alg,
+				      sizeof(struct shash_alg) - sizeof(*alg));
+}
+
+static inline struct crypto_shash *crypto_spawn_shash(
+	struct crypto_shash_spawn *spawn)
+{
+	return crypto_spawn_tfm2(&spawn->base);
+}
+
+static inline void *crypto_shash_ctx_aligned(struct crypto_shash *tfm)
+{
+	return crypto_tfm_ctx_aligned(&tfm->base);
+}
+
+static inline struct crypto_shash *__crypto_shash_cast(struct crypto_tfm *tfm)
+{
+	return container_of(tfm, struct crypto_shash, base);
+}
+
+#endif	/* _CRYPTO_INTERNAL_HASH_H */
+
diff --git a/include/crypto/internal/rng.h b/include/crypto/internal/rng.h
new file mode 100644
index 00000000..89697336
--- /dev/null
+++ b/include/crypto/internal/rng.h
@@ -0,0 +1,26 @@
+/*
+ * RNG: Random Number Generator  algorithms under the crypto API
+ *
+ * Copyright (c) 2008 Neil Horman <nhorman@tuxdriver.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+
+#ifndef _CRYPTO_INTERNAL_RNG_H
+#define _CRYPTO_INTERNAL_RNG_H
+
+#include <crypto/algapi.h>
+#include <crypto/rng.h>
+
+extern const struct crypto_type crypto_rng_type;
+
+static inline void *crypto_rng_ctx(struct crypto_rng *tfm)
+{
+	return crypto_tfm_ctx(&tfm->base);
+}
+
+#endif
diff --git a/include/crypto/internal/skcipher.h b/include/crypto/internal/skcipher.h
new file mode 100644
index 00000000..06e8b32d
--- /dev/null
+++ b/include/crypto/internal/skcipher.h
@@ -0,0 +1,112 @@
+/*
+ * Symmetric key ciphers.
+ * 
+ * Copyright (c) 2007 Herbert Xu <herbert@gondor.apana.org.au>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option) 
+ * any later version.
+ *
+ */
+
+#ifndef _CRYPTO_INTERNAL_SKCIPHER_H
+#define _CRYPTO_INTERNAL_SKCIPHER_H
+
+#include <crypto/algapi.h>
+#include <crypto/skcipher.h>
+#include <linux/types.h>
+
+struct rtattr;
+
+struct crypto_skcipher_spawn {
+	struct crypto_spawn base;
+};
+
+extern const struct crypto_type crypto_givcipher_type;
+
+static inline void crypto_set_skcipher_spawn(
+	struct crypto_skcipher_spawn *spawn, struct crypto_instance *inst)
+{
+	crypto_set_spawn(&spawn->base, inst);
+}
+
+int crypto_grab_skcipher(struct crypto_skcipher_spawn *spawn, const char *name,
+			 u32 type, u32 mask);
+
+struct crypto_alg *crypto_lookup_skcipher(const char *name, u32 type, u32 mask);
+
+static inline void crypto_drop_skcipher(struct crypto_skcipher_spawn *spawn)
+{
+	crypto_drop_spawn(&spawn->base);
+}
+
+static inline struct crypto_alg *crypto_skcipher_spawn_alg(
+	struct crypto_skcipher_spawn *spawn)
+{
+	return spawn->base.alg;
+}
+
+static inline struct crypto_ablkcipher *crypto_spawn_skcipher(
+	struct crypto_skcipher_spawn *spawn)
+{
+	return __crypto_ablkcipher_cast(
+		crypto_spawn_tfm(&spawn->base, crypto_skcipher_type(0),
+				 crypto_skcipher_mask(0)));
+}
+
+int skcipher_null_givencrypt(struct skcipher_givcrypt_request *req);
+int skcipher_null_givdecrypt(struct skcipher_givcrypt_request *req);
+const char *crypto_default_geniv(const struct crypto_alg *alg);
+
+struct crypto_instance *skcipher_geniv_alloc(struct crypto_template *tmpl,
+					     struct rtattr **tb, u32 type,
+					     u32 mask);
+void skcipher_geniv_free(struct crypto_instance *inst);
+int skcipher_geniv_init(struct crypto_tfm *tfm);
+void skcipher_geniv_exit(struct crypto_tfm *tfm);
+
+static inline struct crypto_ablkcipher *skcipher_geniv_cipher(
+	struct crypto_ablkcipher *geniv)
+{
+	return crypto_ablkcipher_crt(geniv)->base;
+}
+
+static inline int skcipher_enqueue_givcrypt(
+	struct crypto_queue *queue, struct skcipher_givcrypt_request *request)
+{
+	return ablkcipher_enqueue_request(queue, &request->creq);
+}
+
+static inline struct skcipher_givcrypt_request *skcipher_dequeue_givcrypt(
+	struct crypto_queue *queue)
+{
+	return __crypto_dequeue_request(
+		queue, offsetof(struct skcipher_givcrypt_request, creq.base));
+}
+
+static inline void *skcipher_givcrypt_reqctx(
+	struct skcipher_givcrypt_request *req)
+{
+	return ablkcipher_request_ctx(&req->creq);
+}
+
+static inline void ablkcipher_request_complete(struct ablkcipher_request *req,
+					       int err)
+{
+	req->base.complete(&req->base, err);
+}
+
+static inline void skcipher_givcrypt_complete(
+	struct skcipher_givcrypt_request *req, int err)
+{
+	ablkcipher_request_complete(&req->creq, err);
+}
+
+static inline u32 ablkcipher_request_flags(struct ablkcipher_request *req)
+{
+	return req->base.flags;
+}
+
+#endif	/* _CRYPTO_INTERNAL_SKCIPHER_H */
+
diff --git a/include/crypto/lrw.h b/include/crypto/lrw.h
new file mode 100644
index 00000000..25a2c871
--- /dev/null
+++ b/include/crypto/lrw.h
@@ -0,0 +1,43 @@
+#ifndef _CRYPTO_LRW_H
+#define _CRYPTO_LRW_H
+
+#include <crypto/b128ops.h>
+
+struct scatterlist;
+struct gf128mul_64k;
+struct blkcipher_desc;
+
+#define LRW_BLOCK_SIZE 16
+
+struct lrw_table_ctx {
+	/* optimizes multiplying a random (non incrementing, as at the
+	 * start of a new sector) value with key2, we could also have
+	 * used 4k optimization tables or no optimization at all. In the
+	 * latter case we would have to store key2 here */
+	struct gf128mul_64k *table;
+	/* stores:
+	 *  key2*{ 0,0,...0,0,0,0,1 }, key2*{ 0,0,...0,0,0,1,1 },
+	 *  key2*{ 0,0,...0,0,1,1,1 }, key2*{ 0,0,...0,1,1,1,1 }
+	 *  key2*{ 0,0,...1,1,1,1,1 }, etc
+	 * needed for optimized multiplication of incrementing values
+	 * with key2 */
+	be128 mulinc[128];
+};
+
+int lrw_init_table(struct lrw_table_ctx *ctx, const u8 *tweak);
+void lrw_free_table(struct lrw_table_ctx *ctx);
+
+struct lrw_crypt_req {
+	be128 *tbuf;
+	unsigned int tbuflen;
+
+	struct lrw_table_ctx *table_ctx;
+	void *crypt_ctx;
+	void (*crypt_fn)(void *ctx, u8 *blks, unsigned int nbytes);
+};
+
+int lrw_crypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+	      struct scatterlist *src, unsigned int nbytes,
+	      struct lrw_crypt_req *req);
+
+#endif  /* _CRYPTO_LRW_H */
diff --git a/include/crypto/md5.h b/include/crypto/md5.h
new file mode 100644
index 00000000..65f299b0
--- /dev/null
+++ b/include/crypto/md5.h
@@ -0,0 +1,17 @@
+#ifndef _CRYPTO_MD5_H
+#define _CRYPTO_MD5_H
+
+#include <linux/types.h>
+
+#define MD5_DIGEST_SIZE		16
+#define MD5_HMAC_BLOCK_SIZE	64
+#define MD5_BLOCK_WORDS		16
+#define MD5_HASH_WORDS		4
+
+struct md5_state {
+	u32 hash[MD5_HASH_WORDS];
+	u32 block[MD5_BLOCK_WORDS];
+	u64 byte_count;
+};
+
+#endif
diff --git a/include/crypto/padlock.h b/include/crypto/padlock.h
new file mode 100644
index 00000000..d2cfa2ef
--- /dev/null
+++ b/include/crypto/padlock.h
@@ -0,0 +1,29 @@
+/*
+ * Driver for VIA PadLock
+ *
+ * Copyright (c) 2004 Michal Ludvig <michal@logix.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option) 
+ * any later version.
+ *
+ */
+
+#ifndef _CRYPTO_PADLOCK_H
+#define _CRYPTO_PADLOCK_H
+
+#define PADLOCK_ALIGNMENT 16
+
+#define PFX	KBUILD_MODNAME ": "
+
+#define PADLOCK_CRA_PRIORITY	300
+#define PADLOCK_COMPOSITE_PRIORITY 400
+
+#ifdef CONFIG_64BIT
+#define STACK_ALIGN 16
+#else
+#define STACK_ALIGN 4
+#endif
+
+#endif	/* _CRYPTO_PADLOCK_H */
diff --git a/include/crypto/pcrypt.h b/include/crypto/pcrypt.h
new file mode 100644
index 00000000..d7d8bd8c
--- /dev/null
+++ b/include/crypto/pcrypt.h
@@ -0,0 +1,51 @@
+/*
+ * pcrypt - Parallel crypto engine.
+ *
+ * Copyright (C) 2009 secunet Security Networks AG
+ * Copyright (C) 2009 Steffen Klassert <steffen.klassert@secunet.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef _CRYPTO_PCRYPT_H
+#define _CRYPTO_PCRYPT_H
+
+#include <linux/crypto.h>
+#include <linux/kernel.h>
+#include <linux/padata.h>
+
+struct pcrypt_request {
+	struct padata_priv	padata;
+	void			*data;
+	void			*__ctx[] CRYPTO_MINALIGN_ATTR;
+};
+
+static inline void *pcrypt_request_ctx(struct pcrypt_request *req)
+{
+	return req->__ctx;
+}
+
+static inline
+struct padata_priv *pcrypt_request_padata(struct pcrypt_request *req)
+{
+	return &req->padata;
+}
+
+static inline
+struct pcrypt_request *pcrypt_padata_request(struct padata_priv *padata)
+{
+	return container_of(padata, struct pcrypt_request, padata);
+}
+
+#endif
diff --git a/include/crypto/rng.h b/include/crypto/rng.h
new file mode 100644
index 00000000..c93f9b91
--- /dev/null
+++ b/include/crypto/rng.h
@@ -0,0 +1,75 @@
+/*
+ * RNG: Random Number Generator  algorithms under the crypto API
+ *
+ * Copyright (c) 2008 Neil Horman <nhorman@tuxdriver.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+
+#ifndef _CRYPTO_RNG_H
+#define _CRYPTO_RNG_H
+
+#include <linux/crypto.h>
+
+extern struct crypto_rng *crypto_default_rng;
+
+int crypto_get_default_rng(void);
+void crypto_put_default_rng(void);
+
+static inline struct crypto_rng *__crypto_rng_cast(struct crypto_tfm *tfm)
+{
+	return (struct crypto_rng *)tfm;
+}
+
+static inline struct crypto_rng *crypto_alloc_rng(const char *alg_name,
+						  u32 type, u32 mask)
+{
+	type &= ~CRYPTO_ALG_TYPE_MASK;
+	type |= CRYPTO_ALG_TYPE_RNG;
+	mask |= CRYPTO_ALG_TYPE_MASK;
+
+	return __crypto_rng_cast(crypto_alloc_base(alg_name, type, mask));
+}
+
+static inline struct crypto_tfm *crypto_rng_tfm(struct crypto_rng *tfm)
+{
+	return &tfm->base;
+}
+
+static inline struct rng_alg *crypto_rng_alg(struct crypto_rng *tfm)
+{
+	return &crypto_rng_tfm(tfm)->__crt_alg->cra_rng;
+}
+
+static inline struct rng_tfm *crypto_rng_crt(struct crypto_rng *tfm)
+{
+	return &crypto_rng_tfm(tfm)->crt_rng;
+}
+
+static inline void crypto_free_rng(struct crypto_rng *tfm)
+{
+	crypto_free_tfm(crypto_rng_tfm(tfm));
+}
+
+static inline int crypto_rng_get_bytes(struct crypto_rng *tfm,
+				       u8 *rdata, unsigned int dlen)
+{
+	return crypto_rng_crt(tfm)->rng_gen_random(tfm, rdata, dlen);
+}
+
+static inline int crypto_rng_reset(struct crypto_rng *tfm,
+				   u8 *seed, unsigned int slen)
+{
+	return crypto_rng_crt(tfm)->rng_reset(tfm, seed, slen);
+}
+
+static inline int crypto_rng_seedsize(struct crypto_rng *tfm)
+{
+	return crypto_rng_alg(tfm)->seedsize;
+}
+
+#endif
diff --git a/include/crypto/scatterwalk.h b/include/crypto/scatterwalk.h
new file mode 100644
index 00000000..3744d2a6
--- /dev/null
+++ b/include/crypto/scatterwalk.h
@@ -0,0 +1,116 @@
+/*
+ * Cryptographic scatter and gather helpers.
+ *
+ * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
+ * Copyright (c) 2002 Adam J. Richter <adam@yggdrasil.com>
+ * Copyright (c) 2004 Jean-Luc Cooke <jlcooke@certainkey.com>
+ * Copyright (c) 2007 Herbert Xu <herbert@gondor.apana.org.au>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+
+#ifndef _CRYPTO_SCATTERWALK_H
+#define _CRYPTO_SCATTERWALK_H
+
+#include <asm/kmap_types.h>
+#include <crypto/algapi.h>
+#include <linux/hardirq.h>
+#include <linux/highmem.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/scatterlist.h>
+#include <linux/sched.h>
+
+static inline void crypto_yield(u32 flags)
+{
+	if (flags & CRYPTO_TFM_REQ_MAY_SLEEP)
+		cond_resched();
+}
+
+static inline void scatterwalk_sg_chain(struct scatterlist *sg1, int num,
+					struct scatterlist *sg2)
+{
+	sg_set_page(&sg1[num - 1], (void *)sg2, 0, 0);
+	sg1[num - 1].page_link &= ~0x02;
+}
+
+static inline struct scatterlist *scatterwalk_sg_next(struct scatterlist *sg)
+{
+	if (sg_is_last(sg))
+		return NULL;
+
+	return (++sg)->length ? sg : (void *)sg_page(sg);
+}
+
+static inline void scatterwalk_crypto_chain(struct scatterlist *head,
+					    struct scatterlist *sg,
+					    int chain, int num)
+{
+	if (chain) {
+		head->length += sg->length;
+		sg = scatterwalk_sg_next(sg);
+	}
+
+	if (sg)
+		scatterwalk_sg_chain(head, num, sg);
+	else
+		sg_mark_end(head);
+}
+
+static inline unsigned long scatterwalk_samebuf(struct scatter_walk *walk_in,
+						struct scatter_walk *walk_out)
+{
+	return !(((sg_page(walk_in->sg) - sg_page(walk_out->sg)) << PAGE_SHIFT) +
+		 (int)(walk_in->offset - walk_out->offset));
+}
+
+static inline unsigned int scatterwalk_pagelen(struct scatter_walk *walk)
+{
+	unsigned int len = walk->sg->offset + walk->sg->length - walk->offset;
+	unsigned int len_this_page = offset_in_page(~walk->offset) + 1;
+	return len_this_page > len ? len : len_this_page;
+}
+
+static inline unsigned int scatterwalk_clamp(struct scatter_walk *walk,
+					     unsigned int nbytes)
+{
+	unsigned int len_this_page = scatterwalk_pagelen(walk);
+	return nbytes > len_this_page ? len_this_page : nbytes;
+}
+
+static inline void scatterwalk_advance(struct scatter_walk *walk,
+				       unsigned int nbytes)
+{
+	walk->offset += nbytes;
+}
+
+static inline unsigned int scatterwalk_aligned(struct scatter_walk *walk,
+					       unsigned int alignmask)
+{
+	return !(walk->offset & alignmask);
+}
+
+static inline struct page *scatterwalk_page(struct scatter_walk *walk)
+{
+	return sg_page(walk->sg) + (walk->offset >> PAGE_SHIFT);
+}
+
+static inline void scatterwalk_unmap(void *vaddr)
+{
+	kunmap_atomic(vaddr);
+}
+
+void scatterwalk_start(struct scatter_walk *walk, struct scatterlist *sg);
+void scatterwalk_copychunks(void *buf, struct scatter_walk *walk,
+			    size_t nbytes, int out);
+void *scatterwalk_map(struct scatter_walk *walk);
+void scatterwalk_done(struct scatter_walk *walk, int out, int more);
+
+void scatterwalk_map_and_copy(void *buf, struct scatterlist *sg,
+			      unsigned int start, unsigned int nbytes, int out);
+
+#endif  /* _CRYPTO_SCATTERWALK_H */
diff --git a/include/crypto/serpent.h b/include/crypto/serpent.h
new file mode 100644
index 00000000..b7e0941e
--- /dev/null
+++ b/include/crypto/serpent.h
@@ -0,0 +1,27 @@
+/*
+ * Common values for serpent algorithms
+ */
+
+#ifndef _CRYPTO_SERPENT_H
+#define _CRYPTO_SERPENT_H
+
+#include <linux/types.h>
+#include <linux/crypto.h>
+
+#define SERPENT_MIN_KEY_SIZE		  0
+#define SERPENT_MAX_KEY_SIZE		 32
+#define SERPENT_EXPKEY_WORDS		132
+#define SERPENT_BLOCK_SIZE		 16
+
+struct serpent_ctx {
+	u32 expkey[SERPENT_EXPKEY_WORDS];
+};
+
+int __serpent_setkey(struct serpent_ctx *ctx, const u8 *key,
+		     unsigned int keylen);
+int serpent_setkey(struct crypto_tfm *tfm, const u8 *key, unsigned int keylen);
+
+void __serpent_encrypt(struct serpent_ctx *ctx, u8 *dst, const u8 *src);
+void __serpent_decrypt(struct serpent_ctx *ctx, u8 *dst, const u8 *src);
+
+#endif
diff --git a/include/crypto/sha.h b/include/crypto/sha.h
new file mode 100644
index 00000000..c6c9c1fe
--- /dev/null
+++ b/include/crypto/sha.h
@@ -0,0 +1,90 @@
+/*
+ * Common values for SHA algorithms
+ */
+
+#ifndef _CRYPTO_SHA_H
+#define _CRYPTO_SHA_H
+
+#include <linux/types.h>
+
+#define SHA1_DIGEST_SIZE        20
+#define SHA1_BLOCK_SIZE         64
+
+#define SHA224_DIGEST_SIZE	28
+#define SHA224_BLOCK_SIZE	64
+
+#define SHA256_DIGEST_SIZE      32
+#define SHA256_BLOCK_SIZE       64
+
+#define SHA384_DIGEST_SIZE      48
+#define SHA384_BLOCK_SIZE       128
+
+#define SHA512_DIGEST_SIZE      64
+#define SHA512_BLOCK_SIZE       128
+
+#define SHA1_H0		0x67452301UL
+#define SHA1_H1		0xefcdab89UL
+#define SHA1_H2		0x98badcfeUL
+#define SHA1_H3		0x10325476UL
+#define SHA1_H4		0xc3d2e1f0UL
+
+#define SHA224_H0	0xc1059ed8UL
+#define SHA224_H1	0x367cd507UL
+#define SHA224_H2	0x3070dd17UL
+#define SHA224_H3	0xf70e5939UL
+#define SHA224_H4	0xffc00b31UL
+#define SHA224_H5	0x68581511UL
+#define SHA224_H6	0x64f98fa7UL
+#define SHA224_H7	0xbefa4fa4UL
+
+#define SHA256_H0	0x6a09e667UL
+#define SHA256_H1	0xbb67ae85UL
+#define SHA256_H2	0x3c6ef372UL
+#define SHA256_H3	0xa54ff53aUL
+#define SHA256_H4	0x510e527fUL
+#define SHA256_H5	0x9b05688cUL
+#define SHA256_H6	0x1f83d9abUL
+#define SHA256_H7	0x5be0cd19UL
+
+#define SHA384_H0	0xcbbb9d5dc1059ed8ULL
+#define SHA384_H1	0x629a292a367cd507ULL
+#define SHA384_H2	0x9159015a3070dd17ULL
+#define SHA384_H3	0x152fecd8f70e5939ULL
+#define SHA384_H4	0x67332667ffc00b31ULL
+#define SHA384_H5	0x8eb44a8768581511ULL
+#define SHA384_H6	0xdb0c2e0d64f98fa7ULL
+#define SHA384_H7	0x47b5481dbefa4fa4ULL
+
+#define SHA512_H0	0x6a09e667f3bcc908ULL
+#define SHA512_H1	0xbb67ae8584caa73bULL
+#define SHA512_H2	0x3c6ef372fe94f82bULL
+#define SHA512_H3	0xa54ff53a5f1d36f1ULL
+#define SHA512_H4	0x510e527fade682d1ULL
+#define SHA512_H5	0x9b05688c2b3e6c1fULL
+#define SHA512_H6	0x1f83d9abfb41bd6bULL
+#define SHA512_H7	0x5be0cd19137e2179ULL
+
+struct sha1_state {
+	u64 count;
+	u32 state[SHA1_DIGEST_SIZE / 4];
+	u8 buffer[SHA1_BLOCK_SIZE];
+};
+
+struct sha256_state {
+	u64 count;
+	u32 state[SHA256_DIGEST_SIZE / 4];
+	u8 buf[SHA256_BLOCK_SIZE];
+};
+
+struct sha512_state {
+	u64 count[2];
+	u64 state[SHA512_DIGEST_SIZE / 8];
+	u8 buf[SHA512_BLOCK_SIZE];
+};
+
+struct shash_desc;
+
+extern int crypto_sha1_update(struct shash_desc *desc, const u8 *data,
+			      unsigned int len);
+
+#endif
diff --git a/include/crypto/skcipher.h b/include/crypto/skcipher.h
new file mode 100644
index 00000000..25fd6126
--- /dev/null
+++ b/include/crypto/skcipher.h
@@ -0,0 +1,110 @@
+/*
+ * Symmetric key ciphers.
+ * 
+ * Copyright (c) 2007 Herbert Xu <herbert@gondor.apana.org.au>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option) 
+ * any later version.
+ *
+ */
+
+#ifndef _CRYPTO_SKCIPHER_H
+#define _CRYPTO_SKCIPHER_H
+
+#include <linux/crypto.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+
+/**
+ *	struct skcipher_givcrypt_request - Crypto request with IV generation
+ *	@seq: Sequence number for IV generation
+ *	@giv: Space for generated IV
+ *	@creq: The crypto request itself
+ */
+struct skcipher_givcrypt_request {
+	u64 seq;
+	u8 *giv;
+
+	struct ablkcipher_request creq;
+};
+
+static inline struct crypto_ablkcipher *skcipher_givcrypt_reqtfm(
+	struct skcipher_givcrypt_request *req)
+{
+	return crypto_ablkcipher_reqtfm(&req->creq);
+}
+
+static inline int crypto_skcipher_givencrypt(
+	struct skcipher_givcrypt_request *req)
+{
+	struct ablkcipher_tfm *crt =
+		crypto_ablkcipher_crt(skcipher_givcrypt_reqtfm(req));
+	return crt->givencrypt(req);
+};
+
+static inline int crypto_skcipher_givdecrypt(
+	struct skcipher_givcrypt_request *req)
+{
+	struct ablkcipher_tfm *crt =
+		crypto_ablkcipher_crt(skcipher_givcrypt_reqtfm(req));
+	return crt->givdecrypt(req);
+};
+
+static inline void skcipher_givcrypt_set_tfm(
+	struct skcipher_givcrypt_request *req, struct crypto_ablkcipher *tfm)
+{
+	req->creq.base.tfm = crypto_ablkcipher_tfm(tfm);
+}
+
+static inline struct skcipher_givcrypt_request *skcipher_givcrypt_cast(
+	struct crypto_async_request *req)
+{
+	return container_of(ablkcipher_request_cast(req),
+			    struct skcipher_givcrypt_request, creq);
+}
+
+static inline struct skcipher_givcrypt_request *skcipher_givcrypt_alloc(
+	struct crypto_ablkcipher *tfm, gfp_t gfp)
+{
+	struct skcipher_givcrypt_request *req;
+
+	req = kmalloc(sizeof(struct skcipher_givcrypt_request) +
+		      crypto_ablkcipher_reqsize(tfm), gfp);
+
+	if (likely(req))
+		skcipher_givcrypt_set_tfm(req, tfm);
+
+	return req;
+}
+
+static inline void skcipher_givcrypt_free(struct skcipher_givcrypt_request *req)
+{
+	kfree(req);
+}
+
+static inline void skcipher_givcrypt_set_callback(
+	struct skcipher_givcrypt_request *req, u32 flags,
+	crypto_completion_t complete, void *data)
+{
+	ablkcipher_request_set_callback(&req->creq, flags, complete, data);
+}
+
+static inline void skcipher_givcrypt_set_crypt(
+	struct skcipher_givcrypt_request *req,
+	struct scatterlist *src, struct scatterlist *dst,
+	unsigned int nbytes, void *iv)
+{
+	ablkcipher_request_set_crypt(&req->creq, src, dst, nbytes, iv);
+}
+
+static inline void skcipher_givcrypt_set_giv(
+	struct skcipher_givcrypt_request *req, u8 *giv, u64 seq)
+{
+	req->giv = giv;
+	req->seq = seq;
+}
+
+#endif	/* _CRYPTO_SKCIPHER_H */
+
diff --git a/include/crypto/twofish.h b/include/crypto/twofish.h
new file mode 100644
index 00000000..095c901a
--- /dev/null
+++ b/include/crypto/twofish.h
@@ -0,0 +1,24 @@
+#ifndef _CRYPTO_TWOFISH_H
+#define _CRYPTO_TWOFISH_H
+
+#include <linux/types.h>
+
+#define TF_MIN_KEY_SIZE 16
+#define TF_MAX_KEY_SIZE 32
+#define TF_BLOCK_SIZE 16
+
+struct crypto_tfm;
+
+/* Structure for an expanded Twofish key.  s contains the key-dependent
+ * S-boxes composed with the MDS matrix; w contains the eight "whitening"
+ * subkeys, K[0] through K[7].	k holds the remaining, "round" subkeys.  Note
+ * that k[i] corresponds to what the Twofish paper calls K[i+8]. */
+struct twofish_ctx {
+	u32 s[4][256], w[8], k[32];
+};
+
+int __twofish_setkey(struct twofish_ctx *ctx, const u8 *key,
+		     unsigned int key_len, u32 *flags);
+int twofish_setkey(struct crypto_tfm *tfm, const u8 *key, unsigned int key_len);
+
+#endif
diff --git a/include/crypto/vmac.h b/include/crypto/vmac.h
new file mode 100644
index 00000000..c4467c55
--- /dev/null
+++ b/include/crypto/vmac.h
@@ -0,0 +1,61 @@
+/*
+ * Modified to interface to the Linux kernel
+ * Copyright (c) 2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#ifndef __CRYPTO_VMAC_H
+#define __CRYPTO_VMAC_H
+
+/* --------------------------------------------------------------------------
+ * VMAC and VHASH Implementation by Ted Krovetz (tdk@acm.org) and Wei Dai.
+ * This implementation is herby placed in the public domain.
+ * The authors offers no warranty. Use at your own risk.
+ * Please send bug reports to the authors.
+ * Last modified: 17 APR 08, 1700 PDT
+ * ----------------------------------------------------------------------- */
+
+/*
+ * User definable settings.
+ */
+#define VMAC_TAG_LEN	64
+#define VMAC_KEY_SIZE	128/* Must be 128, 192 or 256			*/
+#define VMAC_KEY_LEN	(VMAC_KEY_SIZE/8)
+#define VMAC_NHBYTES	128/* Must 2^i for any 3 < i < 13 Standard = 128*/
+
+/*
+ * This implementation uses u32 and u64 as names for unsigned 32-
+ * and 64-bit integer types. These are defined in C99 stdint.h. The
+ * following may need adaptation if you are not running a C99 or
+ * Microsoft C environment.
+ */
+struct vmac_ctx {
+	u64 nhkey[(VMAC_NHBYTES/8)+2*(VMAC_TAG_LEN/64-1)];
+	u64 polykey[2*VMAC_TAG_LEN/64];
+	u64 l3key[2*VMAC_TAG_LEN/64];
+	u64 polytmp[2*VMAC_TAG_LEN/64];
+	u64 cached_nonce[2];
+	u64 cached_aes[2];
+	int first_block_processed;
+};
+
+typedef u64 vmac_t;
+
+struct vmac_ctx_t {
+	struct crypto_cipher *child;
+	struct vmac_ctx __vmac_ctx;
+};
+
+#endif /* __CRYPTO_VMAC_H */
diff --git a/include/crypto/xts.h b/include/crypto/xts.h
new file mode 100644
index 00000000..72c09eb5
--- /dev/null
+++ b/include/crypto/xts.h
@@ -0,0 +1,27 @@
+#ifndef _CRYPTO_XTS_H
+#define _CRYPTO_XTS_H
+
+#include <crypto/b128ops.h>
+
+struct scatterlist;
+struct blkcipher_desc;
+
+#define XTS_BLOCK_SIZE 16
+
+struct xts_crypt_req {
+	be128 *tbuf;
+	unsigned int tbuflen;
+
+	void *tweak_ctx;
+	void (*tweak_fn)(void *ctx, u8* dst, const u8* src);
+	void *crypt_ctx;
+	void (*crypt_fn)(void *ctx, u8 *blks, unsigned int nbytes);
+};
+
+#define XTS_TWEAK_CAST(x) ((void (*)(void *, u8*, const u8*))(x))
+
+int xts_crypt(struct blkcipher_desc *desc, struct scatterlist *dst,
+	      struct scatterlist *src, unsigned int nbytes,
+	      struct xts_crypt_req *req);
+
+#endif  /* _CRYPTO_XTS_H */
diff --git a/include/drm/Kbuild b/include/drm/Kbuild
new file mode 100644
index 00000000..1e38a19d
--- /dev/null
+++ b/include/drm/Kbuild
@@ -0,0 +1,15 @@
+header-y += drm.h
+header-y += drm_fourcc.h
+header-y += drm_mode.h
+header-y += drm_sarea.h
+header-y += exynos_drm.h
+header-y += i810_drm.h
+header-y += i915_drm.h
+header-y += mga_drm.h
+header-y += nouveau_drm.h
+header-y += r128_drm.h
+header-y += radeon_drm.h
+header-y += savage_drm.h
+header-y += sis_drm.h
+header-y += via_drm.h
+header-y += vmwgfx_drm.h
diff --git a/include/drm/drm.h b/include/drm/drm.h
new file mode 100644
index 00000000..64ff02d5
--- /dev/null
+++ b/include/drm/drm.h
@@ -0,0 +1,824 @@
+/**
+ * \file drm.h
+ * Header for the Direct Rendering Manager
+ *
+ * \author Rickard E. (Rik) Faith <faith@valinux.com>
+ *
+ * \par Acknowledgments:
+ * Dec 1999, Richard Henderson <rth@twiddle.net>, move to generic \c cmpxchg.
+ */
+
+/*
+ * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas.
+ * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
+ * All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DRM_H_
+#define _DRM_H_
+
+#if defined(__linux__)
+
+#include <linux/types.h>
+#include <asm/ioctl.h>
+typedef unsigned int drm_handle_t;
+
+#else /* One of the BSDs */
+
+#include <sys/ioccom.h>
+#include <sys/types.h>
+typedef int8_t   __s8;
+typedef uint8_t  __u8;
+typedef int16_t  __s16;
+typedef uint16_t __u16;
+typedef int32_t  __s32;
+typedef uint32_t __u32;
+typedef int64_t  __s64;
+typedef uint64_t __u64;
+typedef unsigned long drm_handle_t;
+
+#endif
+
+#define DRM_NAME	"drm"	  /**< Name in kernel, /dev, and /proc */
+#define DRM_MIN_ORDER	5	  /**< At least 2^5 bytes = 32 bytes */
+#define DRM_MAX_ORDER	22	  /**< Up to 2^22 bytes = 4MB */
+#define DRM_RAM_PERCENT 10	  /**< How much system ram can we lock? */
+
+#define _DRM_LOCK_HELD	0x80000000U /**< Hardware lock is held */
+#define _DRM_LOCK_CONT	0x40000000U /**< Hardware lock is contended */
+#define _DRM_LOCK_IS_HELD(lock)	   ((lock) & _DRM_LOCK_HELD)
+#define _DRM_LOCK_IS_CONT(lock)	   ((lock) & _DRM_LOCK_CONT)
+#define _DRM_LOCKING_CONTEXT(lock) ((lock) & ~(_DRM_LOCK_HELD|_DRM_LOCK_CONT))
+
+typedef unsigned int drm_context_t;
+typedef unsigned int drm_drawable_t;
+typedef unsigned int drm_magic_t;
+
+/**
+ * Cliprect.
+ *
+ * \warning: If you change this structure, make sure you change
+ * XF86DRIClipRectRec in the server as well
+ *
+ * \note KW: Actually it's illegal to change either for
+ * backwards-compatibility reasons.
+ */
+struct drm_clip_rect {
+	unsigned short x1;
+	unsigned short y1;
+	unsigned short x2;
+	unsigned short y2;
+};
+
+/**
+ * Drawable information.
+ */
+struct drm_drawable_info {
+	unsigned int num_rects;
+	struct drm_clip_rect *rects;
+};
+
+/**
+ * Texture region,
+ */
+struct drm_tex_region {
+	unsigned char next;
+	unsigned char prev;
+	unsigned char in_use;
+	unsigned char padding;
+	unsigned int age;
+};
+
+/**
+ * Hardware lock.
+ *
+ * The lock structure is a simple cache-line aligned integer.  To avoid
+ * processor bus contention on a multiprocessor system, there should not be any
+ * other data stored in the same cache line.
+ */
+struct drm_hw_lock {
+	__volatile__ unsigned int lock;		/**< lock variable */
+	char padding[60];			/**< Pad to cache line */
+};
+
+/**
+ * DRM_IOCTL_VERSION ioctl argument type.
+ *
+ * \sa drmGetVersion().
+ */
+struct drm_version {
+	int version_major;	  /**< Major version */
+	int version_minor;	  /**< Minor version */
+	int version_patchlevel;	  /**< Patch level */
+	size_t name_len;	  /**< Length of name buffer */
+	char __user *name;	  /**< Name of driver */
+	size_t date_len;	  /**< Length of date buffer */
+	char __user *date;	  /**< User-space buffer to hold date */
+	size_t desc_len;	  /**< Length of desc buffer */
+	char __user *desc;	  /**< User-space buffer to hold desc */
+};
+
+/**
+ * DRM_IOCTL_GET_UNIQUE ioctl argument type.
+ *
+ * \sa drmGetBusid() and drmSetBusId().
+ */
+struct drm_unique {
+	size_t unique_len;	  /**< Length of unique */
+	char __user *unique;	  /**< Unique name for driver instantiation */
+};
+
+struct drm_list {
+	int count;		  /**< Length of user-space structures */
+	struct drm_version __user *version;
+};
+
+struct drm_block {
+	int unused;
+};
+
+/**
+ * DRM_IOCTL_CONTROL ioctl argument type.
+ *
+ * \sa drmCtlInstHandler() and drmCtlUninstHandler().
+ */
+struct drm_control {
+	enum {
+		DRM_ADD_COMMAND,
+		DRM_RM_COMMAND,
+		DRM_INST_HANDLER,
+		DRM_UNINST_HANDLER
+	} func;
+	int irq;
+};
+
+/**
+ * Type of memory to map.
+ */
+enum drm_map_type {
+	_DRM_FRAME_BUFFER = 0,	  /**< WC (no caching), no core dump */
+	_DRM_REGISTERS = 1,	  /**< no caching, no core dump */
+	_DRM_SHM = 2,		  /**< shared, cached */
+	_DRM_AGP = 3,		  /**< AGP/GART */
+	_DRM_SCATTER_GATHER = 4,  /**< Scatter/gather memory for PCI DMA */
+	_DRM_CONSISTENT = 5,	  /**< Consistent memory for PCI DMA */
+	_DRM_GEM = 6,		  /**< GEM object */
+};
+
+/**
+ * Memory mapping flags.
+ */
+enum drm_map_flags {
+	_DRM_RESTRICTED = 0x01,	     /**< Cannot be mapped to user-virtual */
+	_DRM_READ_ONLY = 0x02,
+	_DRM_LOCKED = 0x04,	     /**< shared, cached, locked */
+	_DRM_KERNEL = 0x08,	     /**< kernel requires access */
+	_DRM_WRITE_COMBINING = 0x10, /**< use write-combining if available */
+	_DRM_CONTAINS_LOCK = 0x20,   /**< SHM page that contains lock */
+	_DRM_REMOVABLE = 0x40,	     /**< Removable mapping */
+	_DRM_DRIVER = 0x80	     /**< Managed by driver */
+};
+
+struct drm_ctx_priv_map {
+	unsigned int ctx_id;	 /**< Context requesting private mapping */
+	void *handle;		 /**< Handle of map */
+};
+
+/**
+ * DRM_IOCTL_GET_MAP, DRM_IOCTL_ADD_MAP and DRM_IOCTL_RM_MAP ioctls
+ * argument type.
+ *
+ * \sa drmAddMap().
+ */
+struct drm_map {
+	unsigned long offset;	 /**< Requested physical address (0 for SAREA)*/
+	unsigned long size;	 /**< Requested physical size (bytes) */
+	enum drm_map_type type;	 /**< Type of memory to map */
+	enum drm_map_flags flags;	 /**< Flags */
+	void *handle;		 /**< User-space: "Handle" to pass to mmap() */
+				 /**< Kernel-space: kernel-virtual address */
+	int mtrr;		 /**< MTRR slot used */
+	/*   Private data */
+};
+
+/**
+ * DRM_IOCTL_GET_CLIENT ioctl argument type.
+ */
+struct drm_client {
+	int idx;		/**< Which client desired? */
+	int auth;		/**< Is client authenticated? */
+	unsigned long pid;	/**< Process ID */
+	unsigned long uid;	/**< User ID */
+	unsigned long magic;	/**< Magic */
+	unsigned long iocs;	/**< Ioctl count */
+};
+
+enum drm_stat_type {
+	_DRM_STAT_LOCK,
+	_DRM_STAT_OPENS,
+	_DRM_STAT_CLOSES,
+	_DRM_STAT_IOCTLS,
+	_DRM_STAT_LOCKS,
+	_DRM_STAT_UNLOCKS,
+	_DRM_STAT_VALUE,	/**< Generic value */
+	_DRM_STAT_BYTE,		/**< Generic byte counter (1024bytes/K) */
+	_DRM_STAT_COUNT,	/**< Generic non-byte counter (1000/k) */
+
+	_DRM_STAT_IRQ,		/**< IRQ */
+	_DRM_STAT_PRIMARY,	/**< Primary DMA bytes */
+	_DRM_STAT_SECONDARY,	/**< Secondary DMA bytes */
+	_DRM_STAT_DMA,		/**< DMA */
+	_DRM_STAT_SPECIAL,	/**< Special DMA (e.g., priority or polled) */
+	_DRM_STAT_MISSED	/**< Missed DMA opportunity */
+	    /* Add to the *END* of the list */
+};
+
+/**
+ * DRM_IOCTL_GET_STATS ioctl argument type.
+ */
+struct drm_stats {
+	unsigned long count;
+	struct {
+		unsigned long value;
+		enum drm_stat_type type;
+	} data[15];
+};
+
+/**
+ * Hardware locking flags.
+ */
+enum drm_lock_flags {
+	_DRM_LOCK_READY = 0x01,	     /**< Wait until hardware is ready for DMA */
+	_DRM_LOCK_QUIESCENT = 0x02,  /**< Wait until hardware quiescent */
+	_DRM_LOCK_FLUSH = 0x04,	     /**< Flush this context's DMA queue first */
+	_DRM_LOCK_FLUSH_ALL = 0x08,  /**< Flush all DMA queues first */
+	/* These *HALT* flags aren't supported yet
+	   -- they will be used to support the
+	   full-screen DGA-like mode. */
+	_DRM_HALT_ALL_QUEUES = 0x10, /**< Halt all current and future queues */
+	_DRM_HALT_CUR_QUEUES = 0x20  /**< Halt all current queues */
+};
+
+/**
+ * DRM_IOCTL_LOCK, DRM_IOCTL_UNLOCK and DRM_IOCTL_FINISH ioctl argument type.
+ *
+ * \sa drmGetLock() and drmUnlock().
+ */
+struct drm_lock {
+	int context;
+	enum drm_lock_flags flags;
+};
+
+/**
+ * DMA flags
+ *
+ * \warning
+ * These values \e must match xf86drm.h.
+ *
+ * \sa drm_dma.
+ */
+enum drm_dma_flags {
+	/* Flags for DMA buffer dispatch */
+	_DRM_DMA_BLOCK = 0x01,	      /**<
+				       * Block until buffer dispatched.
+				       *
+				       * \note The buffer may not yet have
+				       * been processed by the hardware --
+				       * getting a hardware lock with the
+				       * hardware quiescent will ensure
+				       * that the buffer has been
+				       * processed.
+				       */
+	_DRM_DMA_WHILE_LOCKED = 0x02, /**< Dispatch while lock held */
+	_DRM_DMA_PRIORITY = 0x04,     /**< High priority dispatch */
+
+	/* Flags for DMA buffer request */
+	_DRM_DMA_WAIT = 0x10,	      /**< Wait for free buffers */
+	_DRM_DMA_SMALLER_OK = 0x20,   /**< Smaller-than-requested buffers OK */
+	_DRM_DMA_LARGER_OK = 0x40     /**< Larger-than-requested buffers OK */
+};
+
+/**
+ * DRM_IOCTL_ADD_BUFS and DRM_IOCTL_MARK_BUFS ioctl argument type.
+ *
+ * \sa drmAddBufs().
+ */
+struct drm_buf_desc {
+	int count;		 /**< Number of buffers of this size */
+	int size;		 /**< Size in bytes */
+	int low_mark;		 /**< Low water mark */
+	int high_mark;		 /**< High water mark */
+	enum {
+		_DRM_PAGE_ALIGN = 0x01,	/**< Align on page boundaries for DMA */
+		_DRM_AGP_BUFFER = 0x02,	/**< Buffer is in AGP space */
+		_DRM_SG_BUFFER = 0x04,	/**< Scatter/gather memory buffer */
+		_DRM_FB_BUFFER = 0x08,	/**< Buffer is in frame buffer */
+		_DRM_PCI_BUFFER_RO = 0x10 /**< Map PCI DMA buffer read-only */
+	} flags;
+	unsigned long agp_start; /**<
+				  * Start address of where the AGP buffers are
+				  * in the AGP aperture
+				  */
+};
+
+/**
+ * DRM_IOCTL_INFO_BUFS ioctl argument type.
+ */
+struct drm_buf_info {
+	int count;		/**< Entries in list */
+	struct drm_buf_desc __user *list;
+};
+
+/**
+ * DRM_IOCTL_FREE_BUFS ioctl argument type.
+ */
+struct drm_buf_free {
+	int count;
+	int __user *list;
+};
+
+/**
+ * Buffer information
+ *
+ * \sa drm_buf_map.
+ */
+struct drm_buf_pub {
+	int idx;		       /**< Index into the master buffer list */
+	int total;		       /**< Buffer size */
+	int used;		       /**< Amount of buffer in use (for DMA) */
+	void __user *address;	       /**< Address of buffer */
+};
+
+/**
+ * DRM_IOCTL_MAP_BUFS ioctl argument type.
+ */
+struct drm_buf_map {
+	int count;		/**< Length of the buffer list */
+	void __user *virtual;		/**< Mmap'd area in user-virtual */
+	struct drm_buf_pub __user *list;	/**< Buffer information */
+};
+
+/**
+ * DRM_IOCTL_DMA ioctl argument type.
+ *
+ * Indices here refer to the offset into the buffer list in drm_buf_get.
+ *
+ * \sa drmDMA().
+ */
+struct drm_dma {
+	int context;			  /**< Context handle */
+	int send_count;			  /**< Number of buffers to send */
+	int __user *send_indices;	  /**< List of handles to buffers */
+	int __user *send_sizes;		  /**< Lengths of data to send */
+	enum drm_dma_flags flags;	  /**< Flags */
+	int request_count;		  /**< Number of buffers requested */
+	int request_size;		  /**< Desired size for buffers */
+	int __user *request_indices;	  /**< Buffer information */
+	int __user *request_sizes;
+	int granted_count;		  /**< Number of buffers granted */
+};
+
+enum drm_ctx_flags {
+	_DRM_CONTEXT_PRESERVED = 0x01,
+	_DRM_CONTEXT_2DONLY = 0x02
+};
+
+/**
+ * DRM_IOCTL_ADD_CTX ioctl argument type.
+ *
+ * \sa drmCreateContext() and drmDestroyContext().
+ */
+struct drm_ctx {
+	drm_context_t handle;
+	enum drm_ctx_flags flags;
+};
+
+/**
+ * DRM_IOCTL_RES_CTX ioctl argument type.
+ */
+struct drm_ctx_res {
+	int count;
+	struct drm_ctx __user *contexts;
+};
+
+/**
+ * DRM_IOCTL_ADD_DRAW and DRM_IOCTL_RM_DRAW ioctl argument type.
+ */
+struct drm_draw {
+	drm_drawable_t handle;
+};
+
+/**
+ * DRM_IOCTL_UPDATE_DRAW ioctl argument type.
+ */
+typedef enum {
+	DRM_DRAWABLE_CLIPRECTS,
+} drm_drawable_info_type_t;
+
+struct drm_update_draw {
+	drm_drawable_t handle;
+	unsigned int type;
+	unsigned int num;
+	unsigned long long data;
+};
+
+/**
+ * DRM_IOCTL_GET_MAGIC and DRM_IOCTL_AUTH_MAGIC ioctl argument type.
+ */
+struct drm_auth {
+	drm_magic_t magic;
+};
+
+/**
+ * DRM_IOCTL_IRQ_BUSID ioctl argument type.
+ *
+ * \sa drmGetInterruptFromBusID().
+ */
+struct drm_irq_busid {
+	int irq;	/**< IRQ number */
+	int busnum;	/**< bus number */
+	int devnum;	/**< device number */
+	int funcnum;	/**< function number */
+};
+
+enum drm_vblank_seq_type {
+	_DRM_VBLANK_ABSOLUTE = 0x0,	/**< Wait for specific vblank sequence number */
+	_DRM_VBLANK_RELATIVE = 0x1,	/**< Wait for given number of vblanks */
+	/* bits 1-6 are reserved for high crtcs */
+	_DRM_VBLANK_HIGH_CRTC_MASK = 0x0000003e,
+	_DRM_VBLANK_EVENT = 0x4000000,   /**< Send event instead of blocking */
+	_DRM_VBLANK_FLIP = 0x8000000,   /**< Scheduled buffer swap should flip */
+	_DRM_VBLANK_NEXTONMISS = 0x10000000,	/**< If missed, wait for next vblank */
+	_DRM_VBLANK_SECONDARY = 0x20000000,	/**< Secondary display controller */
+	_DRM_VBLANK_SIGNAL = 0x40000000	/**< Send signal instead of blocking, unsupported */
+};
+#define _DRM_VBLANK_HIGH_CRTC_SHIFT 1
+
+#define _DRM_VBLANK_TYPES_MASK (_DRM_VBLANK_ABSOLUTE | _DRM_VBLANK_RELATIVE)
+#define _DRM_VBLANK_FLAGS_MASK (_DRM_VBLANK_EVENT | _DRM_VBLANK_SIGNAL | \
+				_DRM_VBLANK_SECONDARY | _DRM_VBLANK_NEXTONMISS)
+
+struct drm_wait_vblank_request {
+	enum drm_vblank_seq_type type;
+	unsigned int sequence;
+	unsigned long signal;
+};
+
+struct drm_wait_vblank_reply {
+	enum drm_vblank_seq_type type;
+	unsigned int sequence;
+	long tval_sec;
+	long tval_usec;
+};
+
+/**
+ * DRM_IOCTL_WAIT_VBLANK ioctl argument type.
+ *
+ * \sa drmWaitVBlank().
+ */
+union drm_wait_vblank {
+	struct drm_wait_vblank_request request;
+	struct drm_wait_vblank_reply reply;
+};
+
+#define _DRM_PRE_MODESET 1
+#define _DRM_POST_MODESET 2
+
+/**
+ * DRM_IOCTL_MODESET_CTL ioctl argument type
+ *
+ * \sa drmModesetCtl().
+ */
+struct drm_modeset_ctl {
+	__u32 crtc;
+	__u32 cmd;
+};
+
+/**
+ * DRM_IOCTL_AGP_ENABLE ioctl argument type.
+ *
+ * \sa drmAgpEnable().
+ */
+struct drm_agp_mode {
+	unsigned long mode;	/**< AGP mode */
+};
+
+/**
+ * DRM_IOCTL_AGP_ALLOC and DRM_IOCTL_AGP_FREE ioctls argument type.
+ *
+ * \sa drmAgpAlloc() and drmAgpFree().
+ */
+struct drm_agp_buffer {
+	unsigned long size;	/**< In bytes -- will round to page boundary */
+	unsigned long handle;	/**< Used for binding / unbinding */
+	unsigned long type;	/**< Type of memory to allocate */
+	unsigned long physical;	/**< Physical used by i810 */
+};
+
+/**
+ * DRM_IOCTL_AGP_BIND and DRM_IOCTL_AGP_UNBIND ioctls argument type.
+ *
+ * \sa drmAgpBind() and drmAgpUnbind().
+ */
+struct drm_agp_binding {
+	unsigned long handle;	/**< From drm_agp_buffer */
+	unsigned long offset;	/**< In bytes -- will round to page boundary */
+};
+
+/**
+ * DRM_IOCTL_AGP_INFO ioctl argument type.
+ *
+ * \sa drmAgpVersionMajor(), drmAgpVersionMinor(), drmAgpGetMode(),
+ * drmAgpBase(), drmAgpSize(), drmAgpMemoryUsed(), drmAgpMemoryAvail(),
+ * drmAgpVendorId() and drmAgpDeviceId().
+ */
+struct drm_agp_info {
+	int agp_version_major;
+	int agp_version_minor;
+	unsigned long mode;
+	unsigned long aperture_base;	/* physical address */
+	unsigned long aperture_size;	/* bytes */
+	unsigned long memory_allowed;	/* bytes */
+	unsigned long memory_used;
+
+	/* PCI information */
+	unsigned short id_vendor;
+	unsigned short id_device;
+};
+
+/**
+ * DRM_IOCTL_SG_ALLOC ioctl argument type.
+ */
+struct drm_scatter_gather {
+	unsigned long size;	/**< In bytes -- will round to page boundary */
+	unsigned long handle;	/**< Used for mapping / unmapping */
+};
+
+/**
+ * DRM_IOCTL_SET_VERSION ioctl argument type.
+ */
+struct drm_set_version {
+	int drm_di_major;
+	int drm_di_minor;
+	int drm_dd_major;
+	int drm_dd_minor;
+};
+
+/** DRM_IOCTL_GEM_CLOSE ioctl argument type */
+struct drm_gem_close {
+	/** Handle of the object to be closed. */
+	__u32 handle;
+	__u32 pad;
+};
+
+/** DRM_IOCTL_GEM_FLINK ioctl argument type */
+struct drm_gem_flink {
+	/** Handle for the object being named */
+	__u32 handle;
+
+	/** Returned global name */
+	__u32 name;
+};
+
+/** DRM_IOCTL_GEM_OPEN ioctl argument type */
+struct drm_gem_open {
+	/** Name of object being opened */
+	__u32 name;
+
+	/** Returned handle for the object */
+	__u32 handle;
+
+	/** Returned size of the object */
+	__u64 size;
+};
+
+/** DRM_IOCTL_GET_CAP ioctl argument type */
+struct drm_get_cap {
+	__u64 capability;
+	__u64 value;
+};
+
+#define DRM_CLOEXEC O_CLOEXEC
+struct drm_prime_handle {
+	__u32 handle;
+
+	/** Flags.. only applicable for handle->fd */
+	__u32 flags;
+
+	/** Returned dmabuf file descriptor */
+	__s32 fd;
+};
+
+#include "drm_mode.h"
+
+#define DRM_IOCTL_BASE			'd'
+#define DRM_IO(nr)			_IO(DRM_IOCTL_BASE,nr)
+#define DRM_IOR(nr,type)		_IOR(DRM_IOCTL_BASE,nr,type)
+#define DRM_IOW(nr,type)		_IOW(DRM_IOCTL_BASE,nr,type)
+#define DRM_IOWR(nr,type)		_IOWR(DRM_IOCTL_BASE,nr,type)
+
+#define DRM_IOCTL_VERSION		DRM_IOWR(0x00, struct drm_version)
+#define DRM_IOCTL_GET_UNIQUE		DRM_IOWR(0x01, struct drm_unique)
+#define DRM_IOCTL_GET_MAGIC		DRM_IOR( 0x02, struct drm_auth)
+#define DRM_IOCTL_IRQ_BUSID		DRM_IOWR(0x03, struct drm_irq_busid)
+#define DRM_IOCTL_GET_MAP               DRM_IOWR(0x04, struct drm_map)
+#define DRM_IOCTL_GET_CLIENT            DRM_IOWR(0x05, struct drm_client)
+#define DRM_IOCTL_GET_STATS             DRM_IOR( 0x06, struct drm_stats)
+#define DRM_IOCTL_SET_VERSION		DRM_IOWR(0x07, struct drm_set_version)
+#define DRM_IOCTL_MODESET_CTL           DRM_IOW(0x08, struct drm_modeset_ctl)
+#define DRM_IOCTL_GEM_CLOSE		DRM_IOW (0x09, struct drm_gem_close)
+#define DRM_IOCTL_GEM_FLINK		DRM_IOWR(0x0a, struct drm_gem_flink)
+#define DRM_IOCTL_GEM_OPEN		DRM_IOWR(0x0b, struct drm_gem_open)
+#define DRM_IOCTL_GET_CAP		DRM_IOWR(0x0c, struct drm_get_cap)
+
+#define DRM_IOCTL_SET_UNIQUE		DRM_IOW( 0x10, struct drm_unique)
+#define DRM_IOCTL_AUTH_MAGIC		DRM_IOW( 0x11, struct drm_auth)
+#define DRM_IOCTL_BLOCK			DRM_IOWR(0x12, struct drm_block)
+#define DRM_IOCTL_UNBLOCK		DRM_IOWR(0x13, struct drm_block)
+#define DRM_IOCTL_CONTROL		DRM_IOW( 0x14, struct drm_control)
+#define DRM_IOCTL_ADD_MAP		DRM_IOWR(0x15, struct drm_map)
+#define DRM_IOCTL_ADD_BUFS		DRM_IOWR(0x16, struct drm_buf_desc)
+#define DRM_IOCTL_MARK_BUFS		DRM_IOW( 0x17, struct drm_buf_desc)
+#define DRM_IOCTL_INFO_BUFS		DRM_IOWR(0x18, struct drm_buf_info)
+#define DRM_IOCTL_MAP_BUFS		DRM_IOWR(0x19, struct drm_buf_map)
+#define DRM_IOCTL_FREE_BUFS		DRM_IOW( 0x1a, struct drm_buf_free)
+
+#define DRM_IOCTL_RM_MAP		DRM_IOW( 0x1b, struct drm_map)
+
+#define DRM_IOCTL_SET_SAREA_CTX		DRM_IOW( 0x1c, struct drm_ctx_priv_map)
+#define DRM_IOCTL_GET_SAREA_CTX 	DRM_IOWR(0x1d, struct drm_ctx_priv_map)
+
+#define DRM_IOCTL_SET_MASTER            DRM_IO(0x1e)
+#define DRM_IOCTL_DROP_MASTER           DRM_IO(0x1f)
+
+#define DRM_IOCTL_ADD_CTX		DRM_IOWR(0x20, struct drm_ctx)
+#define DRM_IOCTL_RM_CTX		DRM_IOWR(0x21, struct drm_ctx)
+#define DRM_IOCTL_MOD_CTX		DRM_IOW( 0x22, struct drm_ctx)
+#define DRM_IOCTL_GET_CTX		DRM_IOWR(0x23, struct drm_ctx)
+#define DRM_IOCTL_SWITCH_CTX		DRM_IOW( 0x24, struct drm_ctx)
+#define DRM_IOCTL_NEW_CTX		DRM_IOW( 0x25, struct drm_ctx)
+#define DRM_IOCTL_RES_CTX		DRM_IOWR(0x26, struct drm_ctx_res)
+#define DRM_IOCTL_ADD_DRAW		DRM_IOWR(0x27, struct drm_draw)
+#define DRM_IOCTL_RM_DRAW		DRM_IOWR(0x28, struct drm_draw)
+#define DRM_IOCTL_DMA			DRM_IOWR(0x29, struct drm_dma)
+#define DRM_IOCTL_LOCK			DRM_IOW( 0x2a, struct drm_lock)
+#define DRM_IOCTL_UNLOCK		DRM_IOW( 0x2b, struct drm_lock)
+#define DRM_IOCTL_FINISH		DRM_IOW( 0x2c, struct drm_lock)
+
+#define DRM_IOCTL_PRIME_HANDLE_TO_FD    DRM_IOWR(0x2d, struct drm_prime_handle)
+#define DRM_IOCTL_PRIME_FD_TO_HANDLE    DRM_IOWR(0x2e, struct drm_prime_handle)
+
+#define DRM_IOCTL_AGP_ACQUIRE		DRM_IO(  0x30)
+#define DRM_IOCTL_AGP_RELEASE		DRM_IO(  0x31)
+#define DRM_IOCTL_AGP_ENABLE		DRM_IOW( 0x32, struct drm_agp_mode)
+#define DRM_IOCTL_AGP_INFO		DRM_IOR( 0x33, struct drm_agp_info)
+#define DRM_IOCTL_AGP_ALLOC		DRM_IOWR(0x34, struct drm_agp_buffer)
+#define DRM_IOCTL_AGP_FREE		DRM_IOW( 0x35, struct drm_agp_buffer)
+#define DRM_IOCTL_AGP_BIND		DRM_IOW( 0x36, struct drm_agp_binding)
+#define DRM_IOCTL_AGP_UNBIND		DRM_IOW( 0x37, struct drm_agp_binding)
+
+#define DRM_IOCTL_SG_ALLOC		DRM_IOWR(0x38, struct drm_scatter_gather)
+#define DRM_IOCTL_SG_FREE		DRM_IOW( 0x39, struct drm_scatter_gather)
+
+#define DRM_IOCTL_WAIT_VBLANK		DRM_IOWR(0x3a, union drm_wait_vblank)
+
+#define DRM_IOCTL_UPDATE_DRAW		DRM_IOW(0x3f, struct drm_update_draw)
+
+#define DRM_IOCTL_MODE_GETRESOURCES	DRM_IOWR(0xA0, struct drm_mode_card_res)
+#define DRM_IOCTL_MODE_GETCRTC		DRM_IOWR(0xA1, struct drm_mode_crtc)
+#define DRM_IOCTL_MODE_SETCRTC		DRM_IOWR(0xA2, struct drm_mode_crtc)
+#define DRM_IOCTL_MODE_CURSOR		DRM_IOWR(0xA3, struct drm_mode_cursor)
+#define DRM_IOCTL_MODE_GETGAMMA		DRM_IOWR(0xA4, struct drm_mode_crtc_lut)
+#define DRM_IOCTL_MODE_SETGAMMA		DRM_IOWR(0xA5, struct drm_mode_crtc_lut)
+#define DRM_IOCTL_MODE_GETENCODER	DRM_IOWR(0xA6, struct drm_mode_get_encoder)
+#define DRM_IOCTL_MODE_GETCONNECTOR	DRM_IOWR(0xA7, struct drm_mode_get_connector)
+#define DRM_IOCTL_MODE_ATTACHMODE	DRM_IOWR(0xA8, struct drm_mode_mode_cmd)
+#define DRM_IOCTL_MODE_DETACHMODE	DRM_IOWR(0xA9, struct drm_mode_mode_cmd)
+
+#define DRM_IOCTL_MODE_GETPROPERTY	DRM_IOWR(0xAA, struct drm_mode_get_property)
+#define DRM_IOCTL_MODE_SETPROPERTY	DRM_IOWR(0xAB, struct drm_mode_connector_set_property)
+#define DRM_IOCTL_MODE_GETPROPBLOB	DRM_IOWR(0xAC, struct drm_mode_get_blob)
+#define DRM_IOCTL_MODE_GETFB		DRM_IOWR(0xAD, struct drm_mode_fb_cmd)
+#define DRM_IOCTL_MODE_ADDFB		DRM_IOWR(0xAE, struct drm_mode_fb_cmd)
+#define DRM_IOCTL_MODE_RMFB		DRM_IOWR(0xAF, unsigned int)
+#define DRM_IOCTL_MODE_PAGE_FLIP	DRM_IOWR(0xB0, struct drm_mode_crtc_page_flip)
+#define DRM_IOCTL_MODE_DIRTYFB		DRM_IOWR(0xB1, struct drm_mode_fb_dirty_cmd)
+
+#define DRM_IOCTL_MODE_CREATE_DUMB DRM_IOWR(0xB2, struct drm_mode_create_dumb)
+#define DRM_IOCTL_MODE_MAP_DUMB    DRM_IOWR(0xB3, struct drm_mode_map_dumb)
+#define DRM_IOCTL_MODE_DESTROY_DUMB    DRM_IOWR(0xB4, struct drm_mode_destroy_dumb)
+#define DRM_IOCTL_MODE_GETPLANERESOURCES DRM_IOWR(0xB5, struct drm_mode_get_plane_res)
+#define DRM_IOCTL_MODE_GETPLANE	DRM_IOWR(0xB6, struct drm_mode_get_plane)
+#define DRM_IOCTL_MODE_SETPLANE	DRM_IOWR(0xB7, struct drm_mode_set_plane)
+#define DRM_IOCTL_MODE_ADDFB2		DRM_IOWR(0xB8, struct drm_mode_fb_cmd2)
+
+/**
+ * Device specific ioctls should only be in their respective headers
+ * The device specific ioctl range is from 0x40 to 0x99.
+ * Generic IOCTLS restart at 0xA0.
+ *
+ * \sa drmCommandNone(), drmCommandRead(), drmCommandWrite(), and
+ * drmCommandReadWrite().
+ */
+#define DRM_COMMAND_BASE                0x40
+#define DRM_COMMAND_END			0xA0
+
+/**
+ * Header for events written back to userspace on the drm fd.  The
+ * type defines the type of event, the length specifies the total
+ * length of the event (including the header), and user_data is
+ * typically a 64 bit value passed with the ioctl that triggered the
+ * event.  A read on the drm fd will always only return complete
+ * events, that is, if for example the read buffer is 100 bytes, and
+ * there are two 64 byte events pending, only one will be returned.
+ *
+ * Event types 0 - 0x7fffffff are generic drm events, 0x80000000 and
+ * up are chipset specific.
+ */
+struct drm_event {
+	__u32 type;
+	__u32 length;
+};
+
+#define DRM_EVENT_VBLANK 0x01
+#define DRM_EVENT_FLIP_COMPLETE 0x02
+
+struct drm_event_vblank {
+	struct drm_event base;
+	__u64 user_data;
+	__u32 tv_sec;
+	__u32 tv_usec;
+	__u32 sequence;
+	__u32 reserved;
+};
+
+#define DRM_CAP_DUMB_BUFFER 0x1
+#define DRM_CAP_VBLANK_HIGH_CRTC 0x2
+#define DRM_CAP_DUMB_PREFERRED_DEPTH 0x3
+#define DRM_CAP_DUMB_PREFER_SHADOW 0x4
+
+/* typedef area */
+#ifndef __KERNEL__
+typedef struct drm_clip_rect drm_clip_rect_t;
+typedef struct drm_drawable_info drm_drawable_info_t;
+typedef struct drm_tex_region drm_tex_region_t;
+typedef struct drm_hw_lock drm_hw_lock_t;
+typedef struct drm_version drm_version_t;
+typedef struct drm_unique drm_unique_t;
+typedef struct drm_list drm_list_t;
+typedef struct drm_block drm_block_t;
+typedef struct drm_control drm_control_t;
+typedef enum drm_map_type drm_map_type_t;
+typedef enum drm_map_flags drm_map_flags_t;
+typedef struct drm_ctx_priv_map drm_ctx_priv_map_t;
+typedef struct drm_map drm_map_t;
+typedef struct drm_client drm_client_t;
+typedef enum drm_stat_type drm_stat_type_t;
+typedef struct drm_stats drm_stats_t;
+typedef enum drm_lock_flags drm_lock_flags_t;
+typedef struct drm_lock drm_lock_t;
+typedef enum drm_dma_flags drm_dma_flags_t;
+typedef struct drm_buf_desc drm_buf_desc_t;
+typedef struct drm_buf_info drm_buf_info_t;
+typedef struct drm_buf_free drm_buf_free_t;
+typedef struct drm_buf_pub drm_buf_pub_t;
+typedef struct drm_buf_map drm_buf_map_t;
+typedef struct drm_dma drm_dma_t;
+typedef union drm_wait_vblank drm_wait_vblank_t;
+typedef struct drm_agp_mode drm_agp_mode_t;
+typedef enum drm_ctx_flags drm_ctx_flags_t;
+typedef struct drm_ctx drm_ctx_t;
+typedef struct drm_ctx_res drm_ctx_res_t;
+typedef struct drm_draw drm_draw_t;
+typedef struct drm_update_draw drm_update_draw_t;
+typedef struct drm_auth drm_auth_t;
+typedef struct drm_irq_busid drm_irq_busid_t;
+typedef enum drm_vblank_seq_type drm_vblank_seq_type_t;
+
+typedef struct drm_agp_buffer drm_agp_buffer_t;
+typedef struct drm_agp_binding drm_agp_binding_t;
+typedef struct drm_agp_info drm_agp_info_t;
+typedef struct drm_scatter_gather drm_scatter_gather_t;
+typedef struct drm_set_version drm_set_version_t;
+#endif
+
+#endif
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
new file mode 100644
index 00000000..dd731043
--- /dev/null
+++ b/include/drm/drmP.h
@@ -0,0 +1,1778 @@
+/**
+ * \file drmP.h
+ * Private header for Direct Rendering Manager
+ *
+ * \author Rickard E. (Rik) Faith <faith@valinux.com>
+ * \author Gareth Hughes <gareth@valinux.com>
+ */
+
+/*
+ * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas.
+ * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
+ * Copyright (c) 2009-2010, Code Aurora Forum.
+ * All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DRM_P_H_
+#define _DRM_P_H_
+
+#ifdef __KERNEL__
+#ifdef __alpha__
+/* add include of current.h so that "current" is defined
+ * before static inline funcs in wait.h. Doing this so we
+ * can build the DRM (part of PI DRI). 4/21/2000 S + B */
+#include <asm/current.h>
+#endif				/* __alpha__ */
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+#include <linux/proc_fs.h>
+#include <linux/init.h>
+#include <linux/file.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/jiffies.h>
+#include <linux/dma-mapping.h>
+#include <linux/mm.h>
+#include <linux/cdev.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#if defined(__alpha__) || defined(__powerpc__)
+#include <asm/pgtable.h>	/* For pte_wrprotect */
+#endif
+#include <asm/io.h>
+#include <asm/mman.h>
+#include <asm/uaccess.h>
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif
+#if defined(CONFIG_AGP) || defined(CONFIG_AGP_MODULE)
+#include <linux/types.h>
+#include <linux/agp_backend.h>
+#endif
+#include <linux/workqueue.h>
+#include <linux/poll.h>
+#include <asm/pgalloc.h>
+#include "drm.h"
+
+#include <linux/idr.h>
+
+#define __OS_HAS_AGP (defined(CONFIG_AGP) || (defined(CONFIG_AGP_MODULE) && defined(MODULE)))
+#define __OS_HAS_MTRR (defined(CONFIG_MTRR))
+
+struct module;
+
+struct drm_file;
+struct drm_device;
+
+#include "drm_os_linux.h"
+#include "drm_hashtab.h"
+#include "drm_mm.h"
+
+#define DRM_UT_CORE 		0x01
+#define DRM_UT_DRIVER		0x02
+#define DRM_UT_KMS		0x04
+#define DRM_UT_PRIME		0x08
+/*
+ * Three debug levels are defined.
+ * drm_core, drm_driver, drm_kms
+ * drm_core level can be used in the generic drm code. For example:
+ * 	drm_ioctl, drm_mm, drm_memory
+ * The macro definition of DRM_DEBUG is used.
+ * 	DRM_DEBUG(fmt, args...)
+ * 	The debug info by using the DRM_DEBUG can be obtained by adding
+ * 	the boot option of "drm.debug=1".
+ *
+ * drm_driver level can be used in the specific drm driver. It is used
+ * to add the debug info related with the drm driver. For example:
+ * i915_drv, i915_dma, i915_gem, radeon_drv,
+ * 	The macro definition of DRM_DEBUG_DRIVER can be used.
+ * 	DRM_DEBUG_DRIVER(fmt, args...)
+ * 	The debug info by using the DRM_DEBUG_DRIVER can be obtained by
+ * 	adding the boot option of "drm.debug=0x02"
+ *
+ * drm_kms level can be used in the KMS code related with specific drm driver.
+ * It is used to add the debug info related with KMS mode. For example:
+ * the connector/crtc ,
+ * 	The macro definition of DRM_DEBUG_KMS can be used.
+ * 	DRM_DEBUG_KMS(fmt, args...)
+ * 	The debug info by using the DRM_DEBUG_KMS can be obtained by
+ * 	adding the boot option of "drm.debug=0x04"
+ *
+ * If we add the boot option of "drm.debug=0x06", we can get the debug info by
+ * using the DRM_DEBUG_KMS and DRM_DEBUG_DRIVER.
+ * If we add the boot option of "drm.debug=0x05", we can get the debug info by
+ * using the DRM_DEBUG_KMS and DRM_DEBUG.
+ */
+
+extern __printf(4, 5)
+void drm_ut_debug_printk(unsigned int request_level,
+			 const char *prefix,
+			 const char *function_name,
+			 const char *format, ...);
+extern __printf(2, 3)
+int drm_err(const char *func, const char *format, ...);
+
+/***********************************************************************/
+/** \name DRM template customization defaults */
+/*@{*/
+
+/* driver capabilities and requirements mask */
+#define DRIVER_USE_AGP     0x1
+#define DRIVER_REQUIRE_AGP 0x2
+#define DRIVER_USE_MTRR    0x4
+#define DRIVER_PCI_DMA     0x8
+#define DRIVER_SG          0x10
+#define DRIVER_HAVE_DMA    0x20
+#define DRIVER_HAVE_IRQ    0x40
+#define DRIVER_IRQ_SHARED  0x80
+#define DRIVER_IRQ_VBL     0x100
+#define DRIVER_DMA_QUEUE   0x200
+#define DRIVER_FB_DMA      0x400
+#define DRIVER_IRQ_VBL2    0x800
+#define DRIVER_GEM         0x1000
+#define DRIVER_MODESET     0x2000
+#define DRIVER_PRIME       0x4000
+
+#define DRIVER_BUS_PCI 0x1
+#define DRIVER_BUS_PLATFORM 0x2
+#define DRIVER_BUS_USB 0x3
+
+/***********************************************************************/
+/** \name Begin the DRM... */
+/*@{*/
+
+#define DRM_DEBUG_CODE 2	  /**< Include debugging code if > 1, then
+				     also include looping detection. */
+
+#define DRM_MAGIC_HASH_ORDER  4  /**< Size of key hash table. Must be power of 2. */
+#define DRM_KERNEL_CONTEXT    0	 /**< Change drm_resctx if changed */
+#define DRM_RESERVED_CONTEXTS 1	 /**< Change drm_resctx if changed */
+#define DRM_LOOPING_LIMIT     5000000
+#define DRM_TIME_SLICE	      (HZ/20)  /**< Time slice for GLXContexts */
+#define DRM_LOCK_SLICE	      1	/**< Time slice for lock, in jiffies */
+
+#define DRM_FLAG_DEBUG	  0x01
+
+#define DRM_MAX_CTXBITMAP (PAGE_SIZE * 8)
+#define DRM_MAP_HASH_OFFSET 0x10000000
+
+/*@}*/
+
+/***********************************************************************/
+/** \name Macros to make printk easier */
+/*@{*/
+
+/**
+ * Error output.
+ *
+ * \param fmt printf() like format string.
+ * \param arg arguments
+ */
+#define DRM_ERROR(fmt, ...)				\
+	drm_err(__func__, fmt, ##__VA_ARGS__)
+
+#define DRM_INFO(fmt, ...)				\
+	printk(KERN_INFO "[" DRM_NAME "] " fmt, ##__VA_ARGS__)
+
+/**
+ * Debug output.
+ *
+ * \param fmt printf() like format string.
+ * \param arg arguments
+ */
+#if DRM_DEBUG_CODE
+#define DRM_DEBUG(fmt, args...)						\
+	do {								\
+		drm_ut_debug_printk(DRM_UT_CORE, DRM_NAME, 		\
+					__func__, fmt, ##args);		\
+	} while (0)
+
+#define DRM_DEBUG_DRIVER(fmt, args...)					\
+	do {								\
+		drm_ut_debug_printk(DRM_UT_DRIVER, DRM_NAME,		\
+					__func__, fmt, ##args);		\
+	} while (0)
+#define DRM_DEBUG_KMS(fmt, args...)				\
+	do {								\
+		drm_ut_debug_printk(DRM_UT_KMS, DRM_NAME, 		\
+					 __func__, fmt, ##args);	\
+	} while (0)
+#define DRM_DEBUG_PRIME(fmt, args...)					\
+	do {								\
+		drm_ut_debug_printk(DRM_UT_PRIME, DRM_NAME,		\
+					__func__, fmt, ##args);		\
+	} while (0)
+#define DRM_LOG(fmt, args...)						\
+	do {								\
+		drm_ut_debug_printk(DRM_UT_CORE, NULL,			\
+					NULL, fmt, ##args);		\
+	} while (0)
+#define DRM_LOG_KMS(fmt, args...)					\
+	do {								\
+		drm_ut_debug_printk(DRM_UT_KMS, NULL,			\
+					NULL, fmt, ##args);		\
+	} while (0)
+#define DRM_LOG_MODE(fmt, args...)					\
+	do {								\
+		drm_ut_debug_printk(DRM_UT_MODE, NULL,			\
+					NULL, fmt, ##args);		\
+	} while (0)
+#define DRM_LOG_DRIVER(fmt, args...)					\
+	do {								\
+		drm_ut_debug_printk(DRM_UT_DRIVER, NULL,		\
+					NULL, fmt, ##args);		\
+	} while (0)
+#else
+#define DRM_DEBUG_DRIVER(fmt, args...) do { } while (0)
+#define DRM_DEBUG_KMS(fmt, args...)	do { } while (0)
+#define DRM_DEBUG_PRIME(fmt, args...)	do { } while (0)
+#define DRM_DEBUG(fmt, arg...)		 do { } while (0)
+#define DRM_LOG(fmt, arg...)		do { } while (0)
+#define DRM_LOG_KMS(fmt, args...) do { } while (0)
+#define DRM_LOG_MODE(fmt, arg...) do { } while (0)
+#define DRM_LOG_DRIVER(fmt, arg...) do { } while (0)
+
+#endif
+
+/*@}*/
+
+/***********************************************************************/
+/** \name Internal types and structures */
+/*@{*/
+
+#define DRM_ARRAY_SIZE(x) ARRAY_SIZE(x)
+
+#define DRM_LEFTCOUNT(x) (((x)->rp + (x)->count - (x)->wp) % ((x)->count + 1))
+#define DRM_BUFCOUNT(x) ((x)->count - DRM_LEFTCOUNT(x))
+
+#define DRM_IF_VERSION(maj, min) (maj << 16 | min)
+
+/**
+ * Test that the hardware lock is held by the caller, returning otherwise.
+ *
+ * \param dev DRM device.
+ * \param filp file pointer of the caller.
+ */
+#define LOCK_TEST_WITH_RETURN( dev, _file_priv )				\
+do {										\
+	if (!_DRM_LOCK_IS_HELD(_file_priv->master->lock.hw_lock->lock) ||	\
+	    _file_priv->master->lock.file_priv != _file_priv)	{		\
+		DRM_ERROR( "%s called without lock held, held  %d owner %p %p\n",\
+			   __func__, _DRM_LOCK_IS_HELD(_file_priv->master->lock.hw_lock->lock),\
+			   _file_priv->master->lock.file_priv, _file_priv);	\
+		return -EINVAL;							\
+	}									\
+} while (0)
+
+/**
+ * Ioctl function type.
+ *
+ * \param inode device inode.
+ * \param file_priv DRM file private pointer.
+ * \param cmd command.
+ * \param arg argument.
+ */
+typedef int drm_ioctl_t(struct drm_device *dev, void *data,
+			struct drm_file *file_priv);
+
+typedef int drm_ioctl_compat_t(struct file *filp, unsigned int cmd,
+			       unsigned long arg);
+
+#define DRM_IOCTL_NR(n)                _IOC_NR(n)
+#define DRM_MAJOR       226
+
+#define DRM_AUTH	0x1
+#define	DRM_MASTER	0x2
+#define DRM_ROOT_ONLY	0x4
+#define DRM_CONTROL_ALLOW 0x8
+#define DRM_UNLOCKED	0x10
+
+struct drm_ioctl_desc {
+	unsigned int cmd;
+	int flags;
+	drm_ioctl_t *func;
+	unsigned int cmd_drv;
+};
+
+/**
+ * Creates a driver or general drm_ioctl_desc array entry for the given
+ * ioctl, for use by drm_ioctl().
+ */
+
+#define DRM_IOCTL_DEF_DRV(ioctl, _func, _flags)			\
+	[DRM_IOCTL_NR(DRM_##ioctl)] = {.cmd = DRM_##ioctl, .func = _func, .flags = _flags, .cmd_drv = DRM_IOCTL_##ioctl}
+
+struct drm_magic_entry {
+	struct list_head head;
+	struct drm_hash_item hash_item;
+	struct drm_file *priv;
+};
+
+struct drm_vma_entry {
+	struct list_head head;
+	struct vm_area_struct *vma;
+	pid_t pid;
+};
+
+/**
+ * DMA buffer.
+ */
+struct drm_buf {
+	int idx;		       /**< Index into master buflist */
+	int total;		       /**< Buffer size */
+	int order;		       /**< log-base-2(total) */
+	int used;		       /**< Amount of buffer in use (for DMA) */
+	unsigned long offset;	       /**< Byte offset (used internally) */
+	void *address;		       /**< Address of buffer */
+	unsigned long bus_address;     /**< Bus address of buffer */
+	struct drm_buf *next;	       /**< Kernel-only: used for free list */
+	__volatile__ int waiting;      /**< On kernel DMA queue */
+	__volatile__ int pending;      /**< On hardware DMA queue */
+	wait_queue_head_t dma_wait;    /**< Processes waiting */
+	struct drm_file *file_priv;    /**< Private of holding file descr */
+	int context;		       /**< Kernel queue for this buffer */
+	int while_locked;	       /**< Dispatch this buffer while locked */
+	enum {
+		DRM_LIST_NONE = 0,
+		DRM_LIST_FREE = 1,
+		DRM_LIST_WAIT = 2,
+		DRM_LIST_PEND = 3,
+		DRM_LIST_PRIO = 4,
+		DRM_LIST_RECLAIM = 5
+	} list;			       /**< Which list we're on */
+
+	int dev_priv_size;		 /**< Size of buffer private storage */
+	void *dev_private;		 /**< Per-buffer private storage */
+};
+
+/** bufs is one longer than it has to be */
+struct drm_waitlist {
+	int count;			/**< Number of possible buffers */
+	struct drm_buf **bufs;		/**< List of pointers to buffers */
+	struct drm_buf **rp;			/**< Read pointer */
+	struct drm_buf **wp;			/**< Write pointer */
+	struct drm_buf **end;		/**< End pointer */
+	spinlock_t read_lock;
+	spinlock_t write_lock;
+};
+
+struct drm_freelist {
+	int initialized;	       /**< Freelist in use */
+	atomic_t count;		       /**< Number of free buffers */
+	struct drm_buf *next;	       /**< End pointer */
+
+	wait_queue_head_t waiting;     /**< Processes waiting on free bufs */
+	int low_mark;		       /**< Low water mark */
+	int high_mark;		       /**< High water mark */
+	atomic_t wfh;		       /**< If waiting for high mark */
+	spinlock_t lock;
+};
+
+typedef struct drm_dma_handle {
+	dma_addr_t busaddr;
+	void *vaddr;
+	size_t size;
+} drm_dma_handle_t;
+
+/**
+ * Buffer entry.  There is one of this for each buffer size order.
+ */
+struct drm_buf_entry {
+	int buf_size;			/**< size */
+	int buf_count;			/**< number of buffers */
+	struct drm_buf *buflist;		/**< buffer list */
+	int seg_count;
+	int page_order;
+	struct drm_dma_handle **seglist;
+
+	struct drm_freelist freelist;
+};
+
+/* Event queued up for userspace to read */
+struct drm_pending_event {
+	struct drm_event *event;
+	struct list_head link;
+	struct drm_file *file_priv;
+	pid_t pid; /* pid of requester, no guarantee it's valid by the time
+		      we deliver the event, for tracing only */
+	void (*destroy)(struct drm_pending_event *event);
+};
+
+/* initial implementaton using a linked list - todo hashtab */
+struct drm_prime_file_private {
+	struct list_head head;
+	struct mutex lock;
+};
+
+/** File private data */
+struct drm_file {
+	int authenticated;
+	pid_t pid;
+	uid_t uid;
+	drm_magic_t magic;
+	unsigned long ioctl_count;
+	struct list_head lhead;
+	struct drm_minor *minor;
+	unsigned long lock_count;
+
+	/** Mapping of mm object handles to object pointers. */
+	struct idr object_idr;
+	/** Lock for synchronization of access to object_idr. */
+	spinlock_t table_lock;
+
+	struct file *filp;
+	void *driver_priv;
+
+	int is_master; /* this file private is a master for a minor */
+	struct drm_master *master; /* master this node is currently associated with
+				      N.B. not always minor->master */
+	struct list_head fbs;
+
+	wait_queue_head_t event_wait;
+	struct list_head event_list;
+	int event_space;
+
+	struct drm_prime_file_private prime;
+};
+
+/** Wait queue */
+struct drm_queue {
+	atomic_t use_count;		/**< Outstanding uses (+1) */
+	atomic_t finalization;		/**< Finalization in progress */
+	atomic_t block_count;		/**< Count of processes waiting */
+	atomic_t block_read;		/**< Queue blocked for reads */
+	wait_queue_head_t read_queue;	/**< Processes waiting on block_read */
+	atomic_t block_write;		/**< Queue blocked for writes */
+	wait_queue_head_t write_queue;	/**< Processes waiting on block_write */
+	atomic_t total_queued;		/**< Total queued statistic */
+	atomic_t total_flushed;		/**< Total flushes statistic */
+	atomic_t total_locks;		/**< Total locks statistics */
+	enum drm_ctx_flags flags;	/**< Context preserving and 2D-only */
+	struct drm_waitlist waitlist;	/**< Pending buffers */
+	wait_queue_head_t flush_queue;	/**< Processes waiting until flush */
+};
+
+/**
+ * Lock data.
+ */
+struct drm_lock_data {
+	struct drm_hw_lock *hw_lock;	/**< Hardware lock */
+	/** Private of lock holder's file (NULL=kernel) */
+	struct drm_file *file_priv;
+	wait_queue_head_t lock_queue;	/**< Queue of blocked processes */
+	unsigned long lock_time;	/**< Time of last lock in jiffies */
+	spinlock_t spinlock;
+	uint32_t kernel_waiters;
+	uint32_t user_waiters;
+	int idle_has_lock;
+};
+
+/**
+ * DMA data.
+ */
+struct drm_device_dma {
+
+	struct drm_buf_entry bufs[DRM_MAX_ORDER + 1];	/**< buffers, grouped by their size order */
+	int buf_count;			/**< total number of buffers */
+	struct drm_buf **buflist;		/**< Vector of pointers into drm_device_dma::bufs */
+	int seg_count;
+	int page_count;			/**< number of pages */
+	unsigned long *pagelist;	/**< page list */
+	unsigned long byte_count;
+	enum {
+		_DRM_DMA_USE_AGP = 0x01,
+		_DRM_DMA_USE_SG = 0x02,
+		_DRM_DMA_USE_FB = 0x04,
+		_DRM_DMA_USE_PCI_RO = 0x08
+	} flags;
+
+};
+
+/**
+ * AGP memory entry.  Stored as a doubly linked list.
+ */
+struct drm_agp_mem {
+	unsigned long handle;		/**< handle */
+	DRM_AGP_MEM *memory;
+	unsigned long bound;		/**< address */
+	int pages;
+	struct list_head head;
+};
+
+/**
+ * AGP data.
+ *
+ * \sa drm_agp_init() and drm_device::agp.
+ */
+struct drm_agp_head {
+	DRM_AGP_KERN agp_info;		/**< AGP device information */
+	struct list_head memory;
+	unsigned long mode;		/**< AGP mode */
+	struct agp_bridge_data *bridge;
+	int enabled;			/**< whether the AGP bus as been enabled */
+	int acquired;			/**< whether the AGP device has been acquired */
+	unsigned long base;
+	int agp_mtrr;
+	int cant_use_aperture;
+	unsigned long page_mask;
+};
+
+/**
+ * Scatter-gather memory.
+ */
+struct drm_sg_mem {
+	unsigned long handle;
+	void *virtual;
+	int pages;
+	struct page **pagelist;
+	dma_addr_t *busaddr;
+};
+
+struct drm_sigdata {
+	int context;
+	struct drm_hw_lock *lock;
+};
+
+
+/**
+ * Kernel side of a mapping
+ */
+struct drm_local_map {
+	resource_size_t offset;	 /**< Requested physical address (0 for SAREA)*/
+	unsigned long size;	 /**< Requested physical size (bytes) */
+	enum drm_map_type type;	 /**< Type of memory to map */
+	enum drm_map_flags flags;	 /**< Flags */
+	void *handle;		 /**< User-space: "Handle" to pass to mmap() */
+				 /**< Kernel-space: kernel-virtual address */
+	int mtrr;		 /**< MTRR slot used */
+};
+
+typedef struct drm_local_map drm_local_map_t;
+
+/**
+ * Mappings list
+ */
+struct drm_map_list {
+	struct list_head head;		/**< list head */
+	struct drm_hash_item hash;
+	struct drm_local_map *map;	/**< mapping */
+	uint64_t user_token;
+	struct drm_master *master;
+	struct drm_mm_node *file_offset_node;	/**< fake offset */
+};
+
+/**
+ * Context handle list
+ */
+struct drm_ctx_list {
+	struct list_head head;		/**< list head */
+	drm_context_t handle;		/**< context handle */
+	struct drm_file *tag;		/**< associated fd private data */
+};
+
+/* location of GART table */
+#define DRM_ATI_GART_MAIN 1
+#define DRM_ATI_GART_FB   2
+
+#define DRM_ATI_GART_PCI 1
+#define DRM_ATI_GART_PCIE 2
+#define DRM_ATI_GART_IGP 3
+
+struct drm_ati_pcigart_info {
+	int gart_table_location;
+	int gart_reg_if;
+	void *addr;
+	dma_addr_t bus_addr;
+	dma_addr_t table_mask;
+	struct drm_dma_handle *table_handle;
+	struct drm_local_map mapping;
+	int table_size;
+};
+
+/**
+ * GEM specific mm private for tracking GEM objects
+ */
+struct drm_gem_mm {
+	struct drm_mm offset_manager;	/**< Offset mgmt for buffer objects */
+	struct drm_open_hash offset_hash; /**< User token hash table for maps */
+};
+
+/**
+ * This structure defines the drm_mm memory object, which will be used by the
+ * DRM for its buffer objects.
+ */
+struct drm_gem_object {
+	/** Reference count of this object */
+	struct kref refcount;
+
+	/** Handle count of this object. Each handle also holds a reference */
+	atomic_t handle_count; /* number of handles on this object */
+
+	/** Related drm device */
+	struct drm_device *dev;
+
+	/** File representing the shmem storage */
+	struct file *filp;
+
+	/* Mapping info for this object */
+	struct drm_map_list map_list;
+
+	/**
+	 * Size of the object, in bytes.  Immutable over the object's
+	 * lifetime.
+	 */
+	size_t size;
+
+	/**
+	 * Global name for this object, starts at 1. 0 means unnamed.
+	 * Access is covered by the object_name_lock in the related drm_device
+	 */
+	int name;
+
+	/**
+	 * Memory domains. These monitor which caches contain read/write data
+	 * related to the object. When transitioning from one set of domains
+	 * to another, the driver is called to ensure that caches are suitably
+	 * flushed and invalidated
+	 */
+	uint32_t read_domains;
+	uint32_t write_domain;
+
+	/**
+	 * While validating an exec operation, the
+	 * new read/write domain values are computed here.
+	 * They will be transferred to the above values
+	 * at the point that any cache flushing occurs
+	 */
+	uint32_t pending_read_domains;
+	uint32_t pending_write_domain;
+
+	void *driver_private;
+
+	/* dma buf exported from this GEM object */
+	struct dma_buf *export_dma_buf;
+
+	/* dma buf attachment backing this object */
+	struct dma_buf_attachment *import_attach;
+};
+
+#include "drm_crtc.h"
+
+/* per-master structure */
+struct drm_master {
+
+	struct kref refcount; /* refcount for this master */
+
+	struct list_head head; /**< each minor contains a list of masters */
+	struct drm_minor *minor; /**< link back to minor we are a master for */
+
+	char *unique;			/**< Unique identifier: e.g., busid */
+	int unique_len;			/**< Length of unique field */
+	int unique_size;		/**< amount allocated */
+
+	int blocked;			/**< Blocked due to VC switch? */
+
+	/** \name Authentication */
+	/*@{ */
+	struct drm_open_hash magiclist;
+	struct list_head magicfree;
+	/*@} */
+
+	struct drm_lock_data lock;	/**< Information on hardware lock */
+
+	void *driver_priv; /**< Private structure for driver to use */
+};
+
+/* Size of ringbuffer for vblank timestamps. Just double-buffer
+ * in initial implementation.
+ */
+#define DRM_VBLANKTIME_RBSIZE 2
+
+/* Flags and return codes for get_vblank_timestamp() driver function. */
+#define DRM_CALLED_FROM_VBLIRQ 1
+#define DRM_VBLANKTIME_SCANOUTPOS_METHOD (1 << 0)
+#define DRM_VBLANKTIME_INVBL             (1 << 1)
+
+/* get_scanout_position() return flags */
+#define DRM_SCANOUTPOS_VALID        (1 << 0)
+#define DRM_SCANOUTPOS_INVBL        (1 << 1)
+#define DRM_SCANOUTPOS_ACCURATE     (1 << 2)
+
+struct drm_bus {
+	int bus_type;
+	int (*get_irq)(struct drm_device *dev);
+	const char *(*get_name)(struct drm_device *dev);
+	int (*set_busid)(struct drm_device *dev, struct drm_master *master);
+	int (*set_unique)(struct drm_device *dev, struct drm_master *master,
+			  struct drm_unique *unique);
+	int (*irq_by_busid)(struct drm_device *dev, struct drm_irq_busid *p);
+	/* hooks that are for PCI */
+	int (*agp_init)(struct drm_device *dev);
+
+};
+
+/**
+ * DRM driver structure. This structure represent the common code for
+ * a family of cards. There will one drm_device for each card present
+ * in this family
+ */
+struct drm_driver {
+	int (*load) (struct drm_device *, unsigned long flags);
+	int (*firstopen) (struct drm_device *);
+	int (*open) (struct drm_device *, struct drm_file *);
+	void (*preclose) (struct drm_device *, struct drm_file *file_priv);
+	void (*postclose) (struct drm_device *, struct drm_file *);
+	void (*lastclose) (struct drm_device *);
+	int (*unload) (struct drm_device *);
+	int (*suspend) (struct drm_device *, pm_message_t state);
+	int (*resume) (struct drm_device *);
+	int (*dma_ioctl) (struct drm_device *dev, void *data, struct drm_file *file_priv);
+	int (*dma_quiescent) (struct drm_device *);
+	int (*context_dtor) (struct drm_device *dev, int context);
+
+	/**
+	 * get_vblank_counter - get raw hardware vblank counter
+	 * @dev: DRM device
+	 * @crtc: counter to fetch
+	 *
+	 * Driver callback for fetching a raw hardware vblank counter
+	 * for @crtc.  If a device doesn't have a hardware counter, the
+	 * driver can simply return the value of drm_vblank_count and
+	 * make the enable_vblank() and disable_vblank() hooks into no-ops,
+	 * leaving interrupts enabled at all times.
+	 *
+	 * Wraparound handling and loss of events due to modesetting is dealt
+	 * with in the DRM core code.
+	 *
+	 * RETURNS
+	 * Raw vblank counter value.
+	 */
+	u32 (*get_vblank_counter) (struct drm_device *dev, int crtc);
+
+	/**
+	 * enable_vblank - enable vblank interrupt events
+	 * @dev: DRM device
+	 * @crtc: which irq to enable
+	 *
+	 * Enable vblank interrupts for @crtc.  If the device doesn't have
+	 * a hardware vblank counter, this routine should be a no-op, since
+	 * interrupts will have to stay on to keep the count accurate.
+	 *
+	 * RETURNS
+	 * Zero on success, appropriate errno if the given @crtc's vblank
+	 * interrupt cannot be enabled.
+	 */
+	int (*enable_vblank) (struct drm_device *dev, int crtc);
+
+	/**
+	 * disable_vblank - disable vblank interrupt events
+	 * @dev: DRM device
+	 * @crtc: which irq to enable
+	 *
+	 * Disable vblank interrupts for @crtc.  If the device doesn't have
+	 * a hardware vblank counter, this routine should be a no-op, since
+	 * interrupts will have to stay on to keep the count accurate.
+	 */
+	void (*disable_vblank) (struct drm_device *dev, int crtc);
+
+	/**
+	 * Called by \c drm_device_is_agp.  Typically used to determine if a
+	 * card is really attached to AGP or not.
+	 *
+	 * \param dev  DRM device handle
+	 *
+	 * \returns
+	 * One of three values is returned depending on whether or not the
+	 * card is absolutely \b not AGP (return of 0), absolutely \b is AGP
+	 * (return of 1), or may or may not be AGP (return of 2).
+	 */
+	int (*device_is_agp) (struct drm_device *dev);
+
+	/**
+	 * Called by vblank timestamping code.
+	 *
+	 * Return the current display scanout position from a crtc.
+	 *
+	 * \param dev  DRM device.
+	 * \param crtc Id of the crtc to query.
+	 * \param *vpos Target location for current vertical scanout position.
+	 * \param *hpos Target location for current horizontal scanout position.
+	 *
+	 * Returns vpos as a positive number while in active scanout area.
+	 * Returns vpos as a negative number inside vblank, counting the number
+	 * of scanlines to go until end of vblank, e.g., -1 means "one scanline
+	 * until start of active scanout / end of vblank."
+	 *
+	 * \return Flags, or'ed together as follows:
+	 *
+	 * DRM_SCANOUTPOS_VALID = Query successful.
+	 * DRM_SCANOUTPOS_INVBL = Inside vblank.
+	 * DRM_SCANOUTPOS_ACCURATE = Returned position is accurate. A lack of
+	 * this flag means that returned position may be offset by a constant
+	 * but unknown small number of scanlines wrt. real scanout position.
+	 *
+	 */
+	int (*get_scanout_position) (struct drm_device *dev, int crtc,
+				     int *vpos, int *hpos);
+
+	/**
+	 * Called by \c drm_get_last_vbltimestamp. Should return a precise
+	 * timestamp when the most recent VBLANK interval ended or will end.
+	 *
+	 * Specifically, the timestamp in @vblank_time should correspond as
+	 * closely as possible to the time when the first video scanline of
+	 * the video frame after the end of VBLANK will start scanning out,
+	 * the time immediately after end of the VBLANK interval. If the
+	 * @crtc is currently inside VBLANK, this will be a time in the future.
+	 * If the @crtc is currently scanning out a frame, this will be the
+	 * past start time of the current scanout. This is meant to adhere
+	 * to the OpenML OML_sync_control extension specification.
+	 *
+	 * \param dev dev DRM device handle.
+	 * \param crtc crtc for which timestamp should be returned.
+	 * \param *max_error Maximum allowable timestamp error in nanoseconds.
+	 *                   Implementation should strive to provide timestamp
+	 *                   with an error of at most *max_error nanoseconds.
+	 *                   Returns true upper bound on error for timestamp.
+	 * \param *vblank_time Target location for returned vblank timestamp.
+	 * \param flags 0 = Defaults, no special treatment needed.
+	 * \param       DRM_CALLED_FROM_VBLIRQ = Function is called from vblank
+	 *	        irq handler. Some drivers need to apply some workarounds
+	 *              for gpu-specific vblank irq quirks if flag is set.
+	 *
+	 * \returns
+	 * Zero if timestamping isn't supported in current display mode or a
+	 * negative number on failure. A positive status code on success,
+	 * which describes how the vblank_time timestamp was computed.
+	 */
+	int (*get_vblank_timestamp) (struct drm_device *dev, int crtc,
+				     int *max_error,
+				     struct timeval *vblank_time,
+				     unsigned flags);
+
+	/* these have to be filled in */
+
+	irqreturn_t(*irq_handler) (DRM_IRQ_ARGS);
+	void (*irq_preinstall) (struct drm_device *dev);
+	int (*irq_postinstall) (struct drm_device *dev);
+	void (*irq_uninstall) (struct drm_device *dev);
+	void (*reclaim_buffers) (struct drm_device *dev,
+				 struct drm_file * file_priv);
+	void (*reclaim_buffers_locked) (struct drm_device *dev,
+					struct drm_file *file_priv);
+	void (*reclaim_buffers_idlelocked) (struct drm_device *dev,
+					    struct drm_file *file_priv);
+	void (*set_version) (struct drm_device *dev,
+			     struct drm_set_version *sv);
+
+	/* Master routines */
+	int (*master_create)(struct drm_device *dev, struct drm_master *master);
+	void (*master_destroy)(struct drm_device *dev, struct drm_master *master);
+	/**
+	 * master_set is called whenever the minor master is set.
+	 * master_drop is called whenever the minor master is dropped.
+	 */
+
+	int (*master_set)(struct drm_device *dev, struct drm_file *file_priv,
+			  bool from_open);
+	void (*master_drop)(struct drm_device *dev, struct drm_file *file_priv,
+			    bool from_release);
+
+	int (*debugfs_init)(struct drm_minor *minor);
+	void (*debugfs_cleanup)(struct drm_minor *minor);
+
+	/**
+	 * Driver-specific constructor for drm_gem_objects, to set up
+	 * obj->driver_private.
+	 *
+	 * Returns 0 on success.
+	 */
+	int (*gem_init_object) (struct drm_gem_object *obj);
+	void (*gem_free_object) (struct drm_gem_object *obj);
+	int (*gem_open_object) (struct drm_gem_object *, struct drm_file *);
+	void (*gem_close_object) (struct drm_gem_object *, struct drm_file *);
+
+	/* prime: */
+	/* export handle -> fd (see drm_gem_prime_handle_to_fd() helper) */
+	int (*prime_handle_to_fd)(struct drm_device *dev, struct drm_file *file_priv,
+				uint32_t handle, uint32_t flags, int *prime_fd);
+	/* import fd -> handle (see drm_gem_prime_fd_to_handle() helper) */
+	int (*prime_fd_to_handle)(struct drm_device *dev, struct drm_file *file_priv,
+				int prime_fd, uint32_t *handle);
+	/* export GEM -> dmabuf */
+	struct dma_buf * (*gem_prime_export)(struct drm_device *dev,
+				struct drm_gem_object *obj, int flags);
+	/* import dmabuf -> GEM */
+	struct drm_gem_object * (*gem_prime_import)(struct drm_device *dev,
+				struct dma_buf *dma_buf);
+
+	/* vga arb irq handler */
+	void (*vgaarb_irq)(struct drm_device *dev, bool state);
+
+	/* dumb alloc support */
+	int (*dumb_create)(struct drm_file *file_priv,
+			   struct drm_device *dev,
+			   struct drm_mode_create_dumb *args);
+	int (*dumb_map_offset)(struct drm_file *file_priv,
+			       struct drm_device *dev, uint32_t handle,
+			       uint64_t *offset);
+	int (*dumb_destroy)(struct drm_file *file_priv,
+			    struct drm_device *dev,
+			    uint32_t handle);
+
+	/* Driver private ops for this object */
+	struct vm_operations_struct *gem_vm_ops;
+
+	int major;
+	int minor;
+	int patchlevel;
+	char *name;
+	char *desc;
+	char *date;
+
+	u32 driver_features;
+	int dev_priv_size;
+	struct drm_ioctl_desc *ioctls;
+	int num_ioctls;
+	const struct file_operations *fops;
+	union {
+		struct pci_driver *pci;
+		struct platform_device *platform_device;
+		struct usb_driver *usb;
+	} kdriver;
+	struct drm_bus *bus;
+
+	/* List of devices hanging off this driver */
+	struct list_head device_list;
+};
+
+#define DRM_MINOR_UNASSIGNED 0
+#define DRM_MINOR_LEGACY 1
+#define DRM_MINOR_CONTROL 2
+#define DRM_MINOR_RENDER 3
+
+
+/**
+ * debugfs node list. This structure represents a debugfs file to
+ * be created by the drm core
+ */
+struct drm_debugfs_list {
+	const char *name; /** file name */
+	int (*show)(struct seq_file*, void*); /** show callback */
+	u32 driver_features; /**< Required driver features for this entry */
+};
+
+/**
+ * debugfs node structure. This structure represents a debugfs file.
+ */
+struct drm_debugfs_node {
+	struct list_head list;
+	struct drm_minor *minor;
+	struct drm_debugfs_list *debugfs_ent;
+	struct dentry *dent;
+};
+
+/**
+ * Info file list entry. This structure represents a debugfs or proc file to
+ * be created by the drm core
+ */
+struct drm_info_list {
+	const char *name; /** file name */
+	int (*show)(struct seq_file*, void*); /** show callback */
+	u32 driver_features; /**< Required driver features for this entry */
+	void *data;
+};
+
+/**
+ * debugfs node structure. This structure represents a debugfs file.
+ */
+struct drm_info_node {
+	struct list_head list;
+	struct drm_minor *minor;
+	struct drm_info_list *info_ent;
+	struct dentry *dent;
+};
+
+/**
+ * DRM minor structure. This structure represents a drm minor number.
+ */
+struct drm_minor {
+	int index;			/**< Minor device number */
+	int type;                       /**< Control or render */
+	dev_t device;			/**< Device number for mknod */
+	struct device kdev;		/**< Linux device */
+	struct drm_device *dev;
+
+	struct proc_dir_entry *proc_root;  /**< proc directory entry */
+	struct drm_info_node proc_nodes;
+	struct dentry *debugfs_root;
+
+	struct list_head debugfs_list;
+	struct mutex debugfs_lock; /* Protects debugfs_list. */
+
+	struct drm_master *master; /* currently active master for this node */
+	struct list_head master_list;
+	struct drm_mode_group mode_group;
+};
+
+/* mode specified on the command line */
+struct drm_cmdline_mode {
+	bool specified;
+	bool refresh_specified;
+	bool bpp_specified;
+	int xres, yres;
+	int bpp;
+	int refresh;
+	bool rb;
+	bool interlace;
+	bool cvt;
+	bool margins;
+	enum drm_connector_force force;
+};
+
+
+struct drm_pending_vblank_event {
+	struct drm_pending_event base;
+	int pipe;
+	struct drm_event_vblank event;
+};
+
+/**
+ * DRM device structure. This structure represent a complete card that
+ * may contain multiple heads.
+ */
+struct drm_device {
+	struct list_head driver_item;	/**< list of devices per driver */
+	char *devname;			/**< For /proc/interrupts */
+	int if_version;			/**< Highest interface version set */
+
+	/** \name Locks */
+	/*@{ */
+	spinlock_t count_lock;		/**< For inuse, drm_device::open_count, drm_device::buf_use */
+	struct mutex struct_mutex;	/**< For others */
+	/*@} */
+
+	/** \name Usage Counters */
+	/*@{ */
+	int open_count;			/**< Outstanding files open */
+	atomic_t ioctl_count;		/**< Outstanding IOCTLs pending */
+	atomic_t vma_count;		/**< Outstanding vma areas open */
+	int buf_use;			/**< Buffers in use -- cannot alloc */
+	atomic_t buf_alloc;		/**< Buffer allocation in progress */
+	/*@} */
+
+	/** \name Performance counters */
+	/*@{ */
+	unsigned long counters;
+	enum drm_stat_type types[15];
+	atomic_t counts[15];
+	/*@} */
+
+	struct list_head filelist;
+
+	/** \name Memory management */
+	/*@{ */
+	struct list_head maplist;	/**< Linked list of regions */
+	int map_count;			/**< Number of mappable regions */
+	struct drm_open_hash map_hash;	/**< User token hash table for maps */
+
+	/** \name Context handle management */
+	/*@{ */
+	struct list_head ctxlist;	/**< Linked list of context handles */
+	int ctx_count;			/**< Number of context handles */
+	struct mutex ctxlist_mutex;	/**< For ctxlist */
+
+	struct idr ctx_idr;
+
+	struct list_head vmalist;	/**< List of vmas (for debugging) */
+
+	/*@} */
+
+	/** \name DMA queues (contexts) */
+	/*@{ */
+	int queue_count;		/**< Number of active DMA queues */
+	int queue_reserved;		  /**< Number of reserved DMA queues */
+	int queue_slots;		/**< Actual length of queuelist */
+	struct drm_queue **queuelist;	/**< Vector of pointers to DMA queues */
+	struct drm_device_dma *dma;		/**< Optional pointer for DMA support */
+	/*@} */
+
+	/** \name Context support */
+	/*@{ */
+	int irq_enabled;		/**< True if irq handler is enabled */
+	__volatile__ long context_flag;	/**< Context swapping flag */
+	__volatile__ long interrupt_flag; /**< Interruption handler flag */
+	__volatile__ long dma_flag;	/**< DMA dispatch flag */
+	wait_queue_head_t context_wait;	/**< Processes waiting on ctx switch */
+	int last_checked;		/**< Last context checked for DMA */
+	int last_context;		/**< Last current context */
+	unsigned long last_switch;	/**< jiffies at last context switch */
+	/*@} */
+
+	struct work_struct work;
+	/** \name VBLANK IRQ support */
+	/*@{ */
+
+	/*
+	 * At load time, disabling the vblank interrupt won't be allowed since
+	 * old clients may not call the modeset ioctl and therefore misbehave.
+	 * Once the modeset ioctl *has* been called though, we can safely
+	 * disable them when unused.
+	 */
+	int vblank_disable_allowed;
+
+	wait_queue_head_t *vbl_queue;   /**< VBLANK wait queue */
+	atomic_t *_vblank_count;        /**< number of VBLANK interrupts (driver must alloc the right number of counters) */
+	struct timeval *_vblank_time;   /**< timestamp of current vblank_count (drivers must alloc right number of fields) */
+	spinlock_t vblank_time_lock;    /**< Protects vblank count and time updates during vblank enable/disable */
+	spinlock_t vbl_lock;
+	atomic_t *vblank_refcount;      /* number of users of vblank interruptsper crtc */
+	u32 *last_vblank;               /* protected by dev->vbl_lock, used */
+					/* for wraparound handling */
+	int *vblank_enabled;            /* so we don't call enable more than
+					   once per disable */
+	int *vblank_inmodeset;          /* Display driver is setting mode */
+	u32 *last_vblank_wait;		/* Last vblank seqno waited per CRTC */
+	struct timer_list vblank_disable_timer;
+
+	u32 max_vblank_count;           /**< size of vblank counter register */
+
+	/**
+	 * List of events
+	 */
+	struct list_head vblank_event_list;
+	spinlock_t event_lock;
+
+	/*@} */
+	cycles_t ctx_start;
+	cycles_t lck_start;
+
+	struct fasync_struct *buf_async;/**< Processes waiting for SIGIO */
+	wait_queue_head_t buf_readers;	/**< Processes waiting to read */
+	wait_queue_head_t buf_writers;	/**< Processes waiting to ctx switch */
+
+	struct drm_agp_head *agp;	/**< AGP data */
+
+	struct device *dev;             /**< Device structure */
+	struct pci_dev *pdev;		/**< PCI device structure */
+	int pci_vendor;			/**< PCI vendor id */
+	int pci_device;			/**< PCI device id */
+#ifdef __alpha__
+	struct pci_controller *hose;
+#endif
+
+	struct platform_device *platformdev; /**< Platform device struture */
+	struct usb_device *usbdev;
+
+	struct drm_sg_mem *sg;	/**< Scatter gather memory */
+	unsigned int num_crtcs;                  /**< Number of CRTCs on this device */
+	void *dev_private;		/**< device private data */
+	void *mm_private;
+	struct address_space *dev_mapping;
+	struct drm_sigdata sigdata;	   /**< For block_all_signals */
+	sigset_t sigmask;
+
+	struct drm_driver *driver;
+	struct drm_local_map *agp_buffer_map;
+	unsigned int agp_buffer_token;
+	struct drm_minor *control;		/**< Control node for card */
+	struct drm_minor *primary;		/**< render type primary screen head */
+
+        struct drm_mode_config mode_config;	/**< Current mode config */
+
+	/** \name GEM information */
+	/*@{ */
+	spinlock_t object_name_lock;
+	struct idr object_name_idr;
+	/*@} */
+	int switch_power_state;
+
+	atomic_t unplugged; /* device has been unplugged or gone away */
+};
+
+#define DRM_SWITCH_POWER_ON 0
+#define DRM_SWITCH_POWER_OFF 1
+#define DRM_SWITCH_POWER_CHANGING 2
+
+static __inline__ int drm_core_check_feature(struct drm_device *dev,
+					     int feature)
+{
+	return ((dev->driver->driver_features & feature) ? 1 : 0);
+}
+
+static inline int drm_dev_to_irq(struct drm_device *dev)
+{
+	return dev->driver->bus->get_irq(dev);
+}
+
+
+#if __OS_HAS_AGP
+static inline int drm_core_has_AGP(struct drm_device *dev)
+{
+	return drm_core_check_feature(dev, DRIVER_USE_AGP);
+}
+#else
+#define drm_core_has_AGP(dev) (0)
+#endif
+
+#if __OS_HAS_MTRR
+static inline int drm_core_has_MTRR(struct drm_device *dev)
+{
+	return drm_core_check_feature(dev, DRIVER_USE_MTRR);
+}
+
+#define DRM_MTRR_WC		MTRR_TYPE_WRCOMB
+
+static inline int drm_mtrr_add(unsigned long offset, unsigned long size,
+			       unsigned int flags)
+{
+	return mtrr_add(offset, size, flags, 1);
+}
+
+static inline int drm_mtrr_del(int handle, unsigned long offset,
+			       unsigned long size, unsigned int flags)
+{
+	return mtrr_del(handle, offset, size);
+}
+
+#else
+#define drm_core_has_MTRR(dev) (0)
+
+#define DRM_MTRR_WC		0
+
+static inline int drm_mtrr_add(unsigned long offset, unsigned long size,
+			       unsigned int flags)
+{
+	return 0;
+}
+
+static inline int drm_mtrr_del(int handle, unsigned long offset,
+			       unsigned long size, unsigned int flags)
+{
+	return 0;
+}
+#endif
+
+static inline void drm_device_set_unplugged(struct drm_device *dev)
+{
+	smp_wmb();
+	atomic_set(&dev->unplugged, 1);
+}
+
+static inline int drm_device_is_unplugged(struct drm_device *dev)
+{
+	int ret = atomic_read(&dev->unplugged);
+	smp_rmb();
+	return ret;
+}
+
+/******************************************************************/
+/** \name Internal function definitions */
+/*@{*/
+
+				/* Driver support (drm_drv.h) */
+extern long drm_ioctl(struct file *filp,
+		      unsigned int cmd, unsigned long arg);
+extern long drm_compat_ioctl(struct file *filp,
+			     unsigned int cmd, unsigned long arg);
+extern int drm_lastclose(struct drm_device *dev);
+
+				/* Device support (drm_fops.h) */
+extern struct mutex drm_global_mutex;
+extern int drm_open(struct inode *inode, struct file *filp);
+extern int drm_stub_open(struct inode *inode, struct file *filp);
+extern int drm_fasync(int fd, struct file *filp, int on);
+extern ssize_t drm_read(struct file *filp, char __user *buffer,
+			size_t count, loff_t *offset);
+extern int drm_release(struct inode *inode, struct file *filp);
+
+				/* Mapping support (drm_vm.h) */
+extern int drm_mmap(struct file *filp, struct vm_area_struct *vma);
+extern int drm_mmap_locked(struct file *filp, struct vm_area_struct *vma);
+extern void drm_vm_open_locked(struct vm_area_struct *vma);
+extern void drm_vm_close_locked(struct vm_area_struct *vma);
+extern unsigned int drm_poll(struct file *filp, struct poll_table_struct *wait);
+
+				/* Memory management support (drm_memory.h) */
+#include "drm_memory.h"
+extern void drm_free_agp(DRM_AGP_MEM * handle, int pages);
+extern int drm_bind_agp(DRM_AGP_MEM * handle, unsigned int start);
+extern DRM_AGP_MEM *drm_agp_bind_pages(struct drm_device *dev,
+				       struct page **pages,
+				       unsigned long num_pages,
+				       uint32_t gtt_offset,
+				       uint32_t type);
+extern int drm_unbind_agp(DRM_AGP_MEM * handle);
+
+				/* Misc. IOCTL support (drm_ioctl.h) */
+extern int drm_irq_by_busid(struct drm_device *dev, void *data,
+			    struct drm_file *file_priv);
+extern int drm_getunique(struct drm_device *dev, void *data,
+			 struct drm_file *file_priv);
+extern int drm_setunique(struct drm_device *dev, void *data,
+			 struct drm_file *file_priv);
+extern int drm_getmap(struct drm_device *dev, void *data,
+		      struct drm_file *file_priv);
+extern int drm_getclient(struct drm_device *dev, void *data,
+			 struct drm_file *file_priv);
+extern int drm_getstats(struct drm_device *dev, void *data,
+			struct drm_file *file_priv);
+extern int drm_getcap(struct drm_device *dev, void *data,
+		      struct drm_file *file_priv);
+extern int drm_setversion(struct drm_device *dev, void *data,
+			  struct drm_file *file_priv);
+extern int drm_noop(struct drm_device *dev, void *data,
+		    struct drm_file *file_priv);
+
+				/* Context IOCTL support (drm_context.h) */
+extern int drm_resctx(struct drm_device *dev, void *data,
+		      struct drm_file *file_priv);
+extern int drm_addctx(struct drm_device *dev, void *data,
+		      struct drm_file *file_priv);
+extern int drm_modctx(struct drm_device *dev, void *data,
+		      struct drm_file *file_priv);
+extern int drm_getctx(struct drm_device *dev, void *data,
+		      struct drm_file *file_priv);
+extern int drm_switchctx(struct drm_device *dev, void *data,
+			 struct drm_file *file_priv);
+extern int drm_newctx(struct drm_device *dev, void *data,
+		      struct drm_file *file_priv);
+extern int drm_rmctx(struct drm_device *dev, void *data,
+		     struct drm_file *file_priv);
+
+extern int drm_ctxbitmap_init(struct drm_device *dev);
+extern void drm_ctxbitmap_cleanup(struct drm_device *dev);
+extern void drm_ctxbitmap_free(struct drm_device *dev, int ctx_handle);
+
+extern int drm_setsareactx(struct drm_device *dev, void *data,
+			   struct drm_file *file_priv);
+extern int drm_getsareactx(struct drm_device *dev, void *data,
+			   struct drm_file *file_priv);
+
+				/* Authentication IOCTL support (drm_auth.h) */
+extern int drm_getmagic(struct drm_device *dev, void *data,
+			struct drm_file *file_priv);
+extern int drm_authmagic(struct drm_device *dev, void *data,
+			 struct drm_file *file_priv);
+extern int drm_remove_magic(struct drm_master *master, drm_magic_t magic);
+
+/* Cache management (drm_cache.c) */
+void drm_clflush_pages(struct page *pages[], unsigned long num_pages);
+
+				/* Locking IOCTL support (drm_lock.h) */
+extern int drm_lock(struct drm_device *dev, void *data,
+		    struct drm_file *file_priv);
+extern int drm_unlock(struct drm_device *dev, void *data,
+		      struct drm_file *file_priv);
+extern int drm_lock_free(struct drm_lock_data *lock_data, unsigned int context);
+extern void drm_idlelock_take(struct drm_lock_data *lock_data);
+extern void drm_idlelock_release(struct drm_lock_data *lock_data);
+
+/*
+ * These are exported to drivers so that they can implement fencing using
+ * DMA quiscent + idle. DMA quiescent usually requires the hardware lock.
+ */
+
+extern int drm_i_have_hw_lock(struct drm_device *dev, struct drm_file *file_priv);
+
+				/* Buffer management support (drm_bufs.h) */
+extern int drm_addbufs_agp(struct drm_device *dev, struct drm_buf_desc * request);
+extern int drm_addbufs_pci(struct drm_device *dev, struct drm_buf_desc * request);
+extern int drm_addmap(struct drm_device *dev, resource_size_t offset,
+		      unsigned int size, enum drm_map_type type,
+		      enum drm_map_flags flags, struct drm_local_map **map_ptr);
+extern int drm_addmap_ioctl(struct drm_device *dev, void *data,
+			    struct drm_file *file_priv);
+extern int drm_rmmap(struct drm_device *dev, struct drm_local_map *map);
+extern int drm_rmmap_locked(struct drm_device *dev, struct drm_local_map *map);
+extern int drm_rmmap_ioctl(struct drm_device *dev, void *data,
+			   struct drm_file *file_priv);
+extern int drm_addbufs(struct drm_device *dev, void *data,
+		       struct drm_file *file_priv);
+extern int drm_infobufs(struct drm_device *dev, void *data,
+			struct drm_file *file_priv);
+extern int drm_markbufs(struct drm_device *dev, void *data,
+			struct drm_file *file_priv);
+extern int drm_freebufs(struct drm_device *dev, void *data,
+			struct drm_file *file_priv);
+extern int drm_mapbufs(struct drm_device *dev, void *data,
+		       struct drm_file *file_priv);
+extern int drm_order(unsigned long size);
+
+				/* DMA support (drm_dma.h) */
+extern int drm_dma_setup(struct drm_device *dev);
+extern void drm_dma_takedown(struct drm_device *dev);
+extern void drm_free_buffer(struct drm_device *dev, struct drm_buf * buf);
+extern void drm_core_reclaim_buffers(struct drm_device *dev,
+				     struct drm_file *filp);
+
+				/* IRQ support (drm_irq.h) */
+extern int drm_control(struct drm_device *dev, void *data,
+		       struct drm_file *file_priv);
+extern int drm_irq_install(struct drm_device *dev);
+extern int drm_irq_uninstall(struct drm_device *dev);
+
+extern int drm_vblank_init(struct drm_device *dev, int num_crtcs);
+extern int drm_wait_vblank(struct drm_device *dev, void *data,
+			   struct drm_file *filp);
+extern int drm_vblank_wait(struct drm_device *dev, unsigned int *vbl_seq);
+extern u32 drm_vblank_count(struct drm_device *dev, int crtc);
+extern u32 drm_vblank_count_and_time(struct drm_device *dev, int crtc,
+				     struct timeval *vblanktime);
+extern bool drm_handle_vblank(struct drm_device *dev, int crtc);
+extern int drm_vblank_get(struct drm_device *dev, int crtc);
+extern void drm_vblank_put(struct drm_device *dev, int crtc);
+extern void drm_vblank_off(struct drm_device *dev, int crtc);
+extern void drm_vblank_cleanup(struct drm_device *dev);
+extern u32 drm_get_last_vbltimestamp(struct drm_device *dev, int crtc,
+				     struct timeval *tvblank, unsigned flags);
+extern int drm_calc_vbltimestamp_from_scanoutpos(struct drm_device *dev,
+						 int crtc, int *max_error,
+						 struct timeval *vblank_time,
+						 unsigned flags,
+						 struct drm_crtc *refcrtc);
+extern void drm_calc_timestamping_constants(struct drm_crtc *crtc);
+
+extern bool
+drm_mode_parse_command_line_for_connector(const char *mode_option,
+					  struct drm_connector *connector,
+					  struct drm_cmdline_mode *mode);
+
+extern struct drm_display_mode *
+drm_mode_create_from_cmdline_mode(struct drm_device *dev,
+				  struct drm_cmdline_mode *cmd);
+
+/* Modesetting support */
+extern void drm_vblank_pre_modeset(struct drm_device *dev, int crtc);
+extern void drm_vblank_post_modeset(struct drm_device *dev, int crtc);
+extern int drm_modeset_ctl(struct drm_device *dev, void *data,
+			   struct drm_file *file_priv);
+
+				/* AGP/GART support (drm_agpsupport.h) */
+extern struct drm_agp_head *drm_agp_init(struct drm_device *dev);
+extern int drm_agp_acquire(struct drm_device *dev);
+extern int drm_agp_acquire_ioctl(struct drm_device *dev, void *data,
+				 struct drm_file *file_priv);
+extern int drm_agp_release(struct drm_device *dev);
+extern int drm_agp_release_ioctl(struct drm_device *dev, void *data,
+				 struct drm_file *file_priv);
+extern int drm_agp_enable(struct drm_device *dev, struct drm_agp_mode mode);
+extern int drm_agp_enable_ioctl(struct drm_device *dev, void *data,
+				struct drm_file *file_priv);
+extern int drm_agp_info(struct drm_device *dev, struct drm_agp_info *info);
+extern int drm_agp_info_ioctl(struct drm_device *dev, void *data,
+			struct drm_file *file_priv);
+extern int drm_agp_alloc(struct drm_device *dev, struct drm_agp_buffer *request);
+extern int drm_agp_alloc_ioctl(struct drm_device *dev, void *data,
+			 struct drm_file *file_priv);
+extern int drm_agp_free(struct drm_device *dev, struct drm_agp_buffer *request);
+extern int drm_agp_free_ioctl(struct drm_device *dev, void *data,
+			struct drm_file *file_priv);
+extern int drm_agp_unbind(struct drm_device *dev, struct drm_agp_binding *request);
+extern int drm_agp_unbind_ioctl(struct drm_device *dev, void *data,
+			  struct drm_file *file_priv);
+extern int drm_agp_bind(struct drm_device *dev, struct drm_agp_binding *request);
+extern int drm_agp_bind_ioctl(struct drm_device *dev, void *data,
+			struct drm_file *file_priv);
+
+				/* Stub support (drm_stub.h) */
+extern int drm_setmaster_ioctl(struct drm_device *dev, void *data,
+			       struct drm_file *file_priv);
+extern int drm_dropmaster_ioctl(struct drm_device *dev, void *data,
+				struct drm_file *file_priv);
+struct drm_master *drm_master_create(struct drm_minor *minor);
+extern struct drm_master *drm_master_get(struct drm_master *master);
+extern void drm_master_put(struct drm_master **master);
+
+extern void drm_put_dev(struct drm_device *dev);
+extern int drm_put_minor(struct drm_minor **minor);
+extern void drm_unplug_dev(struct drm_device *dev);
+extern unsigned int drm_debug;
+
+extern unsigned int drm_vblank_offdelay;
+extern unsigned int drm_timestamp_precision;
+
+extern struct class *drm_class;
+extern struct proc_dir_entry *drm_proc_root;
+extern struct dentry *drm_debugfs_root;
+
+extern struct idr drm_minors_idr;
+
+extern struct drm_local_map *drm_getsarea(struct drm_device *dev);
+
+				/* Proc support (drm_proc.h) */
+extern int drm_proc_init(struct drm_minor *minor, int minor_id,
+			 struct proc_dir_entry *root);
+extern int drm_proc_cleanup(struct drm_minor *minor, struct proc_dir_entry *root);
+
+				/* Debugfs support */
+#if defined(CONFIG_DEBUG_FS)
+extern int drm_debugfs_init(struct drm_minor *minor, int minor_id,
+			    struct dentry *root);
+extern int drm_debugfs_create_files(struct drm_info_list *files, int count,
+				    struct dentry *root, struct drm_minor *minor);
+extern int drm_debugfs_remove_files(struct drm_info_list *files, int count,
+                                    struct drm_minor *minor);
+extern int drm_debugfs_cleanup(struct drm_minor *minor);
+#endif
+
+				/* Info file support */
+extern int drm_name_info(struct seq_file *m, void *data);
+extern int drm_vm_info(struct seq_file *m, void *data);
+extern int drm_queues_info(struct seq_file *m, void *data);
+extern int drm_bufs_info(struct seq_file *m, void *data);
+extern int drm_vblank_info(struct seq_file *m, void *data);
+extern int drm_clients_info(struct seq_file *m, void* data);
+extern int drm_gem_name_info(struct seq_file *m, void *data);
+
+
+extern int drm_gem_prime_handle_to_fd(struct drm_device *dev,
+		struct drm_file *file_priv, uint32_t handle, uint32_t flags,
+		int *prime_fd);
+extern int drm_gem_prime_fd_to_handle(struct drm_device *dev,
+		struct drm_file *file_priv, int prime_fd, uint32_t *handle);
+
+extern int drm_prime_handle_to_fd_ioctl(struct drm_device *dev, void *data,
+					struct drm_file *file_priv);
+extern int drm_prime_fd_to_handle_ioctl(struct drm_device *dev, void *data,
+					struct drm_file *file_priv);
+
+extern struct sg_table *drm_prime_pages_to_sg(struct page **pages, int nr_pages);
+extern void drm_prime_gem_destroy(struct drm_gem_object *obj, struct sg_table *sg);
+
+
+void drm_prime_init_file_private(struct drm_prime_file_private *prime_fpriv);
+void drm_prime_destroy_file_private(struct drm_prime_file_private *prime_fpriv);
+int drm_prime_add_imported_buf_handle(struct drm_prime_file_private *prime_fpriv, struct dma_buf *dma_buf, uint32_t handle);
+int drm_prime_lookup_imported_buf_handle(struct drm_prime_file_private *prime_fpriv, struct dma_buf *dma_buf, uint32_t *handle);
+void drm_prime_remove_imported_buf_handle(struct drm_prime_file_private *prime_fpriv, struct dma_buf *dma_buf);
+
+int drm_prime_add_dma_buf(struct drm_device *dev, struct drm_gem_object *obj);
+int drm_prime_lookup_obj(struct drm_device *dev, struct dma_buf *buf,
+			 struct drm_gem_object **obj);
+
+#if DRM_DEBUG_CODE
+extern int drm_vma_info(struct seq_file *m, void *data);
+#endif
+
+				/* Scatter Gather Support (drm_scatter.h) */
+extern void drm_sg_cleanup(struct drm_sg_mem * entry);
+extern int drm_sg_alloc_ioctl(struct drm_device *dev, void *data,
+			struct drm_file *file_priv);
+extern int drm_sg_alloc(struct drm_device *dev, struct drm_scatter_gather * request);
+extern int drm_sg_free(struct drm_device *dev, void *data,
+		       struct drm_file *file_priv);
+
+			       /* ATI PCIGART support (ati_pcigart.h) */
+extern int drm_ati_pcigart_init(struct drm_device *dev,
+				struct drm_ati_pcigart_info * gart_info);
+extern int drm_ati_pcigart_cleanup(struct drm_device *dev,
+				   struct drm_ati_pcigart_info * gart_info);
+
+extern drm_dma_handle_t *drm_pci_alloc(struct drm_device *dev, size_t size,
+				       size_t align);
+extern void __drm_pci_free(struct drm_device *dev, drm_dma_handle_t * dmah);
+extern void drm_pci_free(struct drm_device *dev, drm_dma_handle_t * dmah);
+
+			       /* sysfs support (drm_sysfs.c) */
+struct drm_sysfs_class;
+extern struct class *drm_sysfs_create(struct module *owner, char *name);
+extern void drm_sysfs_destroy(void);
+extern int drm_sysfs_device_add(struct drm_minor *minor);
+extern void drm_sysfs_hotplug_event(struct drm_device *dev);
+extern void drm_sysfs_device_remove(struct drm_minor *minor);
+extern char *drm_get_connector_status_name(enum drm_connector_status status);
+extern int drm_sysfs_connector_add(struct drm_connector *connector);
+extern void drm_sysfs_connector_remove(struct drm_connector *connector);
+
+/* Graphics Execution Manager library functions (drm_gem.c) */
+int drm_gem_init(struct drm_device *dev);
+void drm_gem_destroy(struct drm_device *dev);
+void drm_gem_object_release(struct drm_gem_object *obj);
+void drm_gem_object_free(struct kref *kref);
+struct drm_gem_object *drm_gem_object_alloc(struct drm_device *dev,
+					    size_t size);
+int drm_gem_object_init(struct drm_device *dev,
+			struct drm_gem_object *obj, size_t size);
+int drm_gem_private_object_init(struct drm_device *dev,
+			struct drm_gem_object *obj, size_t size);
+void drm_gem_object_handle_free(struct drm_gem_object *obj);
+void drm_gem_vm_open(struct vm_area_struct *vma);
+void drm_gem_vm_close(struct vm_area_struct *vma);
+int drm_gem_mmap(struct file *filp, struct vm_area_struct *vma);
+
+#include "drm_global.h"
+
+static inline void
+drm_gem_object_reference(struct drm_gem_object *obj)
+{
+	kref_get(&obj->refcount);
+}
+
+static inline void
+drm_gem_object_unreference(struct drm_gem_object *obj)
+{
+	if (obj != NULL)
+		kref_put(&obj->refcount, drm_gem_object_free);
+}
+
+static inline void
+drm_gem_object_unreference_unlocked(struct drm_gem_object *obj)
+{
+	if (obj != NULL) {
+		struct drm_device *dev = obj->dev;
+		mutex_lock(&dev->struct_mutex);
+		kref_put(&obj->refcount, drm_gem_object_free);
+		mutex_unlock(&dev->struct_mutex);
+	}
+}
+
+int drm_gem_handle_create(struct drm_file *file_priv,
+			  struct drm_gem_object *obj,
+			  u32 *handlep);
+int drm_gem_handle_delete(struct drm_file *filp, u32 handle);
+
+static inline void
+drm_gem_object_handle_reference(struct drm_gem_object *obj)
+{
+	drm_gem_object_reference(obj);
+	atomic_inc(&obj->handle_count);
+}
+
+static inline void
+drm_gem_object_handle_unreference(struct drm_gem_object *obj)
+{
+	if (obj == NULL)
+		return;
+
+	if (atomic_read(&obj->handle_count) == 0)
+		return;
+	/*
+	 * Must bump handle count first as this may be the last
+	 * ref, in which case the object would disappear before we
+	 * checked for a name
+	 */
+	if (atomic_dec_and_test(&obj->handle_count))
+		drm_gem_object_handle_free(obj);
+	drm_gem_object_unreference(obj);
+}
+
+static inline void
+drm_gem_object_handle_unreference_unlocked(struct drm_gem_object *obj)
+{
+	if (obj == NULL)
+		return;
+
+	if (atomic_read(&obj->handle_count) == 0)
+		return;
+
+	/*
+	* Must bump handle count first as this may be the last
+	* ref, in which case the object would disappear before we
+	* checked for a name
+	*/
+
+	if (atomic_dec_and_test(&obj->handle_count))
+		drm_gem_object_handle_free(obj);
+	drm_gem_object_unreference_unlocked(obj);
+}
+
+void drm_gem_free_mmap_offset(struct drm_gem_object *obj);
+int drm_gem_create_mmap_offset(struct drm_gem_object *obj);
+
+struct drm_gem_object *drm_gem_object_lookup(struct drm_device *dev,
+					     struct drm_file *filp,
+					     u32 handle);
+int drm_gem_close_ioctl(struct drm_device *dev, void *data,
+			struct drm_file *file_priv);
+int drm_gem_flink_ioctl(struct drm_device *dev, void *data,
+			struct drm_file *file_priv);
+int drm_gem_open_ioctl(struct drm_device *dev, void *data,
+		       struct drm_file *file_priv);
+void drm_gem_open(struct drm_device *dev, struct drm_file *file_private);
+void drm_gem_release(struct drm_device *dev, struct drm_file *file_private);
+
+extern void drm_core_ioremap(struct drm_local_map *map, struct drm_device *dev);
+extern void drm_core_ioremap_wc(struct drm_local_map *map, struct drm_device *dev);
+extern void drm_core_ioremapfree(struct drm_local_map *map, struct drm_device *dev);
+
+static __inline__ struct drm_local_map *drm_core_findmap(struct drm_device *dev,
+							 unsigned int token)
+{
+	struct drm_map_list *_entry;
+	list_for_each_entry(_entry, &dev->maplist, head)
+	    if (_entry->user_token == token)
+		return _entry->map;
+	return NULL;
+}
+
+static __inline__ void drm_core_dropmap(struct drm_local_map *map)
+{
+}
+
+#include "drm_mem_util.h"
+
+extern int drm_fill_in_dev(struct drm_device *dev,
+			   const struct pci_device_id *ent,
+			   struct drm_driver *driver);
+int drm_get_minor(struct drm_device *dev, struct drm_minor **minor, int type);
+/*@}*/
+
+/* PCI section */
+static __inline__ int drm_pci_device_is_agp(struct drm_device *dev)
+{
+	if (dev->driver->device_is_agp != NULL) {
+		int err = (*dev->driver->device_is_agp) (dev);
+
+		if (err != 2) {
+			return err;
+		}
+	}
+
+	return pci_find_capability(dev->pdev, PCI_CAP_ID_AGP);
+}
+
+extern int drm_pci_init(struct drm_driver *driver, struct pci_driver *pdriver);
+extern void drm_pci_exit(struct drm_driver *driver, struct pci_driver *pdriver);
+extern int drm_get_pci_dev(struct pci_dev *pdev,
+			   const struct pci_device_id *ent,
+			   struct drm_driver *driver);
+
+
+/* platform section */
+extern int drm_platform_init(struct drm_driver *driver, struct platform_device *platform_device);
+extern void drm_platform_exit(struct drm_driver *driver, struct platform_device *platform_device);
+
+extern int drm_get_platform_dev(struct platform_device *pdev,
+				struct drm_driver *driver);
+
+/* returns true if currently okay to sleep */
+static __inline__ bool drm_can_sleep(void)
+{
+	if (in_atomic() || in_dbg_master() || irqs_disabled())
+		return false;
+	return true;
+}
+
+#endif				/* __KERNEL__ */
+#endif
diff --git a/include/drm/drm_buffer.h b/include/drm/drm_buffer.h
new file mode 100644
index 00000000..322dbff3
--- /dev/null
+++ b/include/drm/drm_buffer.h
@@ -0,0 +1,148 @@
+/**************************************************************************
+ *
+ * Copyright 2010 Pauli Nieminen.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ *
+ **************************************************************************/
+/*
+ * Multipart buffer for coping data which is larger than the page size.
+ *
+ * Authors:
+ * Pauli Nieminen <suokkos-at-gmail-dot-com>
+ */
+
+#ifndef _DRM_BUFFER_H_
+#define _DRM_BUFFER_H_
+
+#include "drmP.h"
+
+struct drm_buffer {
+	int iterator;
+	int size;
+	char *data[];
+};
+
+
+/**
+ * Return the index of page that buffer is currently pointing at.
+ */
+static inline int drm_buffer_page(struct drm_buffer *buf)
+{
+	return buf->iterator / PAGE_SIZE;
+}
+/**
+ * Return the index of the current byte in the page
+ */
+static inline int drm_buffer_index(struct drm_buffer *buf)
+{
+	return buf->iterator & (PAGE_SIZE - 1);
+}
+/**
+ * Return number of bytes that is left to process
+ */
+static inline int drm_buffer_unprocessed(struct drm_buffer *buf)
+{
+	return buf->size - buf->iterator;
+}
+
+/**
+ * Advance the buffer iterator number of bytes that is given.
+ */
+static inline void drm_buffer_advance(struct drm_buffer *buf, int bytes)
+{
+	buf->iterator += bytes;
+}
+
+/**
+ * Allocate the drm buffer object.
+ *
+ *   buf: A pointer to a pointer where the object is stored.
+ *   size: The number of bytes to allocate.
+ */
+extern int drm_buffer_alloc(struct drm_buffer **buf, int size);
+
+/**
+ * Copy the user data to the begin of the buffer and reset the processing
+ * iterator.
+ *
+ *   user_data: A pointer the data that is copied to the buffer.
+ *   size: The Number of bytes to copy.
+ */
+extern int drm_buffer_copy_from_user(struct drm_buffer *buf,
+		void __user *user_data, int size);
+
+/**
+ * Free the drm buffer object
+ */
+extern void drm_buffer_free(struct drm_buffer *buf);
+
+/**
+ * Read an object from buffer that may be split to multiple parts. If object
+ * is not split function just returns the pointer to object in buffer. But in
+ * case of split object data is copied to given stack object that is suplied
+ * by caller.
+ *
+ * The processing location of the buffer is also advanced to the next byte
+ * after the object.
+ *
+ *   objsize: The size of the objet in bytes.
+ *   stack_obj: A pointer to a memory location where object can be copied.
+ */
+extern void *drm_buffer_read_object(struct drm_buffer *buf,
+		int objsize, void *stack_obj);
+
+/**
+ * Returns the pointer to the dword which is offset number of elements from the
+ * current processing location.
+ *
+ * Caller must make sure that dword is not split in the buffer. This
+ * requirement is easily met if all the sizes of objects in buffer are
+ * multiples of dword and PAGE_SIZE is multiple dword.
+ *
+ * Call to this function doesn't change the processing location.
+ *
+ *   offset: The index of the dword relative to the internat iterator.
+ */
+static inline void *drm_buffer_pointer_to_dword(struct drm_buffer *buffer,
+		int offset)
+{
+	int iter = buffer->iterator + offset * 4;
+	return &buffer->data[iter / PAGE_SIZE][iter & (PAGE_SIZE - 1)];
+}
+/**
+ * Returns the pointer to the dword which is offset number of elements from
+ * the current processing location.
+ *
+ * Call to this function doesn't change the processing location.
+ *
+ *   offset: The index of the byte relative to the internat iterator.
+ */
+static inline void *drm_buffer_pointer_to_byte(struct drm_buffer *buffer,
+		int offset)
+{
+	int iter = buffer->iterator + offset;
+	return &buffer->data[iter / PAGE_SIZE][iter & (PAGE_SIZE - 1)];
+}
+
+#endif
diff --git a/include/drm/drm_cache.h b/include/drm/drm_cache.h
new file mode 100644
index 00000000..7bfb0630
--- /dev/null
+++ b/include/drm/drm_cache.h
@@ -0,0 +1,38 @@
+/**************************************************************************
+ *
+ * Copyright 2009 Red Hat Inc.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ *
+ **************************************************************************/
+/*
+ * Authors:
+ * Dave Airlie <airlied@redhat.com>
+ */
+
+#ifndef _DRM_CACHE_H_
+#define _DRM_CACHE_H_
+
+void drm_clflush_pages(struct page *pages[], unsigned long num_pages);
+
+#endif
diff --git a/include/drm/drm_core.h b/include/drm/drm_core.h
new file mode 100644
index 00000000..4e752386
--- /dev/null
+++ b/include/drm/drm_core.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2004 Jon Smirl <jonsmirl@gmail.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sub license,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * VIA, S3 GRAPHICS, AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+#define CORE_AUTHOR		"Gareth Hughes, Leif Delgass, José Fonseca, Jon Smirl"
+
+#define CORE_NAME		"drm"
+#define CORE_DESC		"DRM shared core routines"
+#define CORE_DATE		"20060810"
+
+#define DRM_IF_MAJOR	1
+#define DRM_IF_MINOR	4
+
+#define CORE_MAJOR	1
+#define CORE_MINOR	1
+#define CORE_PATCHLEVEL 0
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
new file mode 100644
index 00000000..e250eda4
--- /dev/null
+++ b/include/drm/drm_crtc.h
@@ -0,0 +1,1029 @@
+/*
+ * Copyright © 2006 Keith Packard
+ * Copyright © 2007-2008 Dave Airlie
+ * Copyright © 2007-2008 Intel Corporation
+ *   Jesse Barnes <jesse.barnes@intel.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#ifndef __DRM_CRTC_H__
+#define __DRM_CRTC_H__
+
+#include <linux/i2c.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/idr.h>
+#include <linux/fb.h>
+
+#include <drm/drm_fourcc.h>
+
+struct drm_device;
+struct drm_mode_set;
+struct drm_framebuffer;
+
+
+#define DRM_MODE_OBJECT_CRTC 0xcccccccc
+#define DRM_MODE_OBJECT_CONNECTOR 0xc0c0c0c0
+#define DRM_MODE_OBJECT_ENCODER 0xe0e0e0e0
+#define DRM_MODE_OBJECT_MODE 0xdededede
+#define DRM_MODE_OBJECT_PROPERTY 0xb0b0b0b0
+#define DRM_MODE_OBJECT_FB 0xfbfbfbfb
+#define DRM_MODE_OBJECT_BLOB 0xbbbbbbbb
+#define DRM_MODE_OBJECT_PLANE 0xeeeeeeee
+
+struct drm_mode_object {
+	uint32_t id;
+	uint32_t type;
+};
+
+/*
+ * Note on terminology:  here, for brevity and convenience, we refer to connector
+ * control chips as 'CRTCs'.  They can control any type of connector, VGA, LVDS,
+ * DVI, etc.  And 'screen' refers to the whole of the visible display, which
+ * may span multiple monitors (and therefore multiple CRTC and connector
+ * structures).
+ */
+
+enum drm_mode_status {
+    MODE_OK	= 0,	/* Mode OK */
+    MODE_HSYNC,		/* hsync out of range */
+    MODE_VSYNC,		/* vsync out of range */
+    MODE_H_ILLEGAL,	/* mode has illegal horizontal timings */
+    MODE_V_ILLEGAL,	/* mode has illegal horizontal timings */
+    MODE_BAD_WIDTH,	/* requires an unsupported linepitch */
+    MODE_NOMODE,	/* no mode with a matching name */
+    MODE_NO_INTERLACE,	/* interlaced mode not supported */
+    MODE_NO_DBLESCAN,	/* doublescan mode not supported */
+    MODE_NO_VSCAN,	/* multiscan mode not supported */
+    MODE_MEM,		/* insufficient video memory */
+    MODE_VIRTUAL_X,	/* mode width too large for specified virtual size */
+    MODE_VIRTUAL_Y,	/* mode height too large for specified virtual size */
+    MODE_MEM_VIRT,	/* insufficient video memory given virtual size */
+    MODE_NOCLOCK,	/* no fixed clock available */
+    MODE_CLOCK_HIGH,	/* clock required is too high */
+    MODE_CLOCK_LOW,	/* clock required is too low */
+    MODE_CLOCK_RANGE,	/* clock/mode isn't in a ClockRange */
+    MODE_BAD_HVALUE,	/* horizontal timing was out of range */
+    MODE_BAD_VVALUE,	/* vertical timing was out of range */
+    MODE_BAD_VSCAN,	/* VScan value out of range */
+    MODE_HSYNC_NARROW,	/* horizontal sync too narrow */
+    MODE_HSYNC_WIDE,	/* horizontal sync too wide */
+    MODE_HBLANK_NARROW,	/* horizontal blanking too narrow */
+    MODE_HBLANK_WIDE,	/* horizontal blanking too wide */
+    MODE_VSYNC_NARROW,	/* vertical sync too narrow */
+    MODE_VSYNC_WIDE,	/* vertical sync too wide */
+    MODE_VBLANK_NARROW,	/* vertical blanking too narrow */
+    MODE_VBLANK_WIDE,	/* vertical blanking too wide */
+    MODE_PANEL,         /* exceeds panel dimensions */
+    MODE_INTERLACE_WIDTH, /* width too large for interlaced mode */
+    MODE_ONE_WIDTH,     /* only one width is supported */
+    MODE_ONE_HEIGHT,    /* only one height is supported */
+    MODE_ONE_SIZE,      /* only one resolution is supported */
+    MODE_NO_REDUCED,    /* monitor doesn't accept reduced blanking */
+    MODE_UNVERIFIED = -3, /* mode needs to reverified */
+    MODE_BAD = -2,	/* unspecified reason */
+    MODE_ERROR	= -1	/* error condition */
+};
+
+#define DRM_MODE_TYPE_CLOCK_CRTC_C (DRM_MODE_TYPE_CLOCK_C | \
+				    DRM_MODE_TYPE_CRTC_C)
+
+#define DRM_MODE(nm, t, c, hd, hss, hse, ht, hsk, vd, vss, vse, vt, vs, f) \
+	.name = nm, .status = 0, .type = (t), .clock = (c), \
+	.hdisplay = (hd), .hsync_start = (hss), .hsync_end = (hse), \
+	.htotal = (ht), .hskew = (hsk), .vdisplay = (vd), \
+	.vsync_start = (vss), .vsync_end = (vse), .vtotal = (vt), \
+	.vscan = (vs), .flags = (f), .vrefresh = 0
+
+#define CRTC_INTERLACE_HALVE_V 0x1 /* halve V values for interlacing */
+
+struct drm_display_mode {
+	/* Header */
+	struct list_head head;
+	struct drm_mode_object base;
+
+	char name[DRM_DISPLAY_MODE_LEN];
+
+	enum drm_mode_status status;
+	unsigned int type;
+
+	/* Proposed mode values */
+	int clock;		/* in kHz */
+	int hdisplay;
+	int hsync_start;
+	int hsync_end;
+	int htotal;
+	int hskew;
+	int vdisplay;
+	int vsync_start;
+	int vsync_end;
+	int vtotal;
+	int vscan;
+	unsigned int flags;
+
+	/* Addressable image size (may be 0 for projectors, etc.) */
+	int width_mm;
+	int height_mm;
+
+	/* Actual mode we give to hw */
+	int clock_index;
+	int synth_clock;
+	int crtc_hdisplay;
+	int crtc_hblank_start;
+	int crtc_hblank_end;
+	int crtc_hsync_start;
+	int crtc_hsync_end;
+	int crtc_htotal;
+	int crtc_hskew;
+	int crtc_vdisplay;
+	int crtc_vblank_start;
+	int crtc_vblank_end;
+	int crtc_vsync_start;
+	int crtc_vsync_end;
+	int crtc_vtotal;
+	int crtc_hadjusted;
+	int crtc_vadjusted;
+
+	/* Driver private mode info */
+	int private_size;
+	int *private;
+	int private_flags;
+
+	int vrefresh;		/* in Hz */
+	int hsync;		/* in kHz */
+};
+
+enum drm_connector_status {
+	connector_status_connected = 1,
+	connector_status_disconnected = 2,
+	connector_status_unknown = 3,
+};
+
+enum subpixel_order {
+	SubPixelUnknown = 0,
+	SubPixelHorizontalRGB,
+	SubPixelHorizontalBGR,
+	SubPixelVerticalRGB,
+	SubPixelVerticalBGR,
+	SubPixelNone,
+};
+
+#define DRM_COLOR_FORMAT_RGB444		(1<<0)
+#define DRM_COLOR_FORMAT_YCRCB444	(1<<1)
+#define DRM_COLOR_FORMAT_YCRCB422	(1<<2)
+/*
+ * Describes a given display (e.g. CRT or flat panel) and its limitations.
+ */
+struct drm_display_info {
+	char name[DRM_DISPLAY_INFO_LEN];
+
+	/* Physical size */
+        unsigned int width_mm;
+	unsigned int height_mm;
+
+	/* Clock limits FIXME: storage format */
+	unsigned int min_vfreq, max_vfreq;
+	unsigned int min_hfreq, max_hfreq;
+	unsigned int pixel_clock;
+	unsigned int bpc;
+
+	enum subpixel_order subpixel_order;
+	u32 color_formats;
+
+	u8 cea_rev;
+
+	char *raw_edid; /* if any */
+};
+
+struct drm_framebuffer_funcs {
+	void (*destroy)(struct drm_framebuffer *framebuffer);
+	int (*create_handle)(struct drm_framebuffer *fb,
+			     struct drm_file *file_priv,
+			     unsigned int *handle);
+	/**
+	 * Optinal callback for the dirty fb ioctl.
+	 *
+	 * Userspace can notify the driver via this callback
+	 * that a area of the framebuffer has changed and should
+	 * be flushed to the display hardware.
+	 *
+	 * See documentation in drm_mode.h for the struct
+	 * drm_mode_fb_dirty_cmd for more information as all
+	 * the semantics and arguments have a one to one mapping
+	 * on this function.
+	 */
+	int (*dirty)(struct drm_framebuffer *framebuffer,
+		     struct drm_file *file_priv, unsigned flags,
+		     unsigned color, struct drm_clip_rect *clips,
+		     unsigned num_clips);
+};
+
+struct drm_framebuffer {
+	struct drm_device *dev;
+	struct list_head head;
+	struct drm_mode_object base;
+	const struct drm_framebuffer_funcs *funcs;
+	unsigned int pitches[4];
+	unsigned int offsets[4];
+	unsigned int width;
+	unsigned int height;
+	/* depth can be 15 or 16 */
+	unsigned int depth;
+	int bits_per_pixel;
+	int flags;
+	uint32_t pixel_format; /* fourcc format */
+	struct list_head filp_head;
+	/* if you are using the helper */
+	void *helper_private;
+};
+
+struct drm_property_blob {
+	struct drm_mode_object base;
+	struct list_head head;
+	unsigned int length;
+	unsigned char data[];
+};
+
+struct drm_property_enum {
+	uint64_t value;
+	struct list_head head;
+	char name[DRM_PROP_NAME_LEN];
+};
+
+struct drm_property {
+	struct list_head head;
+	struct drm_mode_object base;
+	uint32_t flags;
+	char name[DRM_PROP_NAME_LEN];
+	uint32_t num_values;
+	uint64_t *values;
+
+	struct list_head enum_blob_list;
+};
+
+struct drm_crtc;
+struct drm_connector;
+struct drm_encoder;
+struct drm_pending_vblank_event;
+struct drm_plane;
+
+/**
+ * drm_crtc_funcs - control CRTCs for a given device
+ * @reset: reset CRTC after state has been invalidate (e.g. resume)
+ * @dpms: control display power levels
+ * @save: save CRTC state
+ * @resore: restore CRTC state
+ * @lock: lock the CRTC
+ * @unlock: unlock the CRTC
+ * @shadow_allocate: allocate shadow pixmap
+ * @shadow_create: create shadow pixmap for rotation support
+ * @shadow_destroy: free shadow pixmap
+ * @mode_fixup: fixup proposed mode
+ * @mode_set: set the desired mode on the CRTC
+ * @gamma_set: specify color ramp for CRTC
+ * @destroy: deinit and free object.
+ *
+ * The drm_crtc_funcs structure is the central CRTC management structure
+ * in the DRM.  Each CRTC controls one or more connectors (note that the name
+ * CRTC is simply historical, a CRTC may control LVDS, VGA, DVI, TV out, etc.
+ * connectors, not just CRTs).
+ *
+ * Each driver is responsible for filling out this structure at startup time,
+ * in addition to providing other modesetting features, like i2c and DDC
+ * bus accessors.
+ */
+struct drm_crtc_funcs {
+	/* Save CRTC state */
+	void (*save)(struct drm_crtc *crtc); /* suspend? */
+	/* Restore CRTC state */
+	void (*restore)(struct drm_crtc *crtc); /* resume? */
+	/* Reset CRTC state */
+	void (*reset)(struct drm_crtc *crtc);
+
+	/* cursor controls */
+	int (*cursor_set)(struct drm_crtc *crtc, struct drm_file *file_priv,
+			  uint32_t handle, uint32_t width, uint32_t height);
+	int (*cursor_move)(struct drm_crtc *crtc, int x, int y);
+
+	/* Set gamma on the CRTC */
+	void (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b,
+			  uint32_t start, uint32_t size);
+	/* Object destroy routine */
+	void (*destroy)(struct drm_crtc *crtc);
+
+	int (*set_config)(struct drm_mode_set *set);
+
+	/*
+	 * Flip to the given framebuffer.  This implements the page
+	 * flip ioctl described in drm_mode.h, specifically, the
+	 * implementation must return immediately and block all
+	 * rendering to the current fb until the flip has completed.
+	 * If userspace set the event flag in the ioctl, the event
+	 * argument will point to an event to send back when the flip
+	 * completes, otherwise it will be NULL.
+	 */
+	int (*page_flip)(struct drm_crtc *crtc,
+			 struct drm_framebuffer *fb,
+			 struct drm_pending_vblank_event *event);
+};
+
+/**
+ * drm_crtc - central CRTC control structure
+ * @dev: parent DRM device
+ * @head: list management
+ * @base: base KMS object for ID tracking etc.
+ * @enabled: is this CRTC enabled?
+ * @mode: current mode timings
+ * @hwmode: mode timings as programmed to hw regs
+ * @x: x position on screen
+ * @y: y position on screen
+ * @funcs: CRTC control functions
+ * @gamma_size: size of gamma ramp
+ * @gamma_store: gamma ramp values
+ * @framedur_ns: precise frame timing
+ * @framedur_ns: precise line timing
+ * @pixeldur_ns: precise pixel timing
+ * @helper_private: mid-layer private data
+ *
+ * Each CRTC may have one or more connectors associated with it.  This structure
+ * allows the CRTC to be controlled.
+ */
+struct drm_crtc {
+	struct drm_device *dev;
+	struct list_head head;
+
+	struct drm_mode_object base;
+
+	/* framebuffer the connector is currently bound to */
+	struct drm_framebuffer *fb;
+
+	bool enabled;
+
+	/* Requested mode from modesetting. */
+	struct drm_display_mode mode;
+
+	/* Programmed mode in hw, after adjustments for encoders,
+	 * crtc, panel scaling etc. Needed for timestamping etc.
+	 */
+	struct drm_display_mode hwmode;
+
+	int x, y;
+	const struct drm_crtc_funcs *funcs;
+
+	/* CRTC gamma size for reporting to userspace */
+	uint32_t gamma_size;
+	uint16_t *gamma_store;
+
+	/* Constants needed for precise vblank and swap timestamping. */
+	s64 framedur_ns, linedur_ns, pixeldur_ns;
+
+	/* if you are using the helper */
+	void *helper_private;
+};
+
+
+/**
+ * drm_connector_funcs - control connectors on a given device
+ * @dpms: set power state (see drm_crtc_funcs above)
+ * @save: save connector state
+ * @restore: restore connector state
+ * @reset: reset connector after state has been invalidate (e.g. resume)
+ * @mode_valid: is this mode valid on the given connector?
+ * @mode_fixup: try to fixup proposed mode for this connector
+ * @mode_set: set this mode
+ * @detect: is this connector active?
+ * @get_modes: get mode list for this connector
+ * @set_property: property for this connector may need update
+ * @destroy: make object go away
+ * @force: notify the driver the connector is forced on
+ *
+ * Each CRTC may have one or more connectors attached to it.  The functions
+ * below allow the core DRM code to control connectors, enumerate available modes,
+ * etc.
+ */
+struct drm_connector_funcs {
+	void (*dpms)(struct drm_connector *connector, int mode);
+	void (*save)(struct drm_connector *connector);
+	void (*restore)(struct drm_connector *connector);
+	void (*reset)(struct drm_connector *connector);
+
+	/* Check to see if anything is attached to the connector.
+	 * @force is set to false whilst polling, true when checking the
+	 * connector due to user request. @force can be used by the driver
+	 * to avoid expensive, destructive operations during automated
+	 * probing.
+	 */
+	enum drm_connector_status (*detect)(struct drm_connector *connector,
+					    bool force);
+	int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height);
+	int (*set_property)(struct drm_connector *connector, struct drm_property *property,
+			     uint64_t val);
+	void (*destroy)(struct drm_connector *connector);
+	void (*force)(struct drm_connector *connector);
+};
+
+/**
+ * drm_encoder_funcs - encoder controls
+ * @reset: reset state (e.g. at init or resume time)
+ * @destroy: cleanup and free associated data
+ *
+ * Encoders sit between CRTCs and connectors.
+ */
+struct drm_encoder_funcs {
+	void (*reset)(struct drm_encoder *encoder);
+	void (*destroy)(struct drm_encoder *encoder);
+};
+
+#define DRM_CONNECTOR_MAX_UMODES 16
+#define DRM_CONNECTOR_MAX_PROPERTY 16
+#define DRM_CONNECTOR_LEN 32
+#define DRM_CONNECTOR_MAX_ENCODER 3
+
+/**
+ * drm_encoder - central DRM encoder structure
+ * @dev: parent DRM device
+ * @head: list management
+ * @base: base KMS object
+ * @encoder_type: one of the %DRM_MODE_ENCODER_<foo> types in drm_mode.h
+ * @possible_crtcs: bitmask of potential CRTC bindings
+ * @possible_clones: bitmask of potential sibling encoders for cloning
+ * @crtc: currently bound CRTC
+ * @funcs: control functions
+ * @helper_private: mid-layer private data
+ *
+ * CRTCs drive pixels to encoders, which convert them into signals
+ * appropriate for a given connector or set of connectors.
+ */
+struct drm_encoder {
+	struct drm_device *dev;
+	struct list_head head;
+
+	struct drm_mode_object base;
+	int encoder_type;
+	uint32_t possible_crtcs;
+	uint32_t possible_clones;
+
+	struct drm_crtc *crtc;
+	const struct drm_encoder_funcs *funcs;
+	void *helper_private;
+};
+
+enum drm_connector_force {
+	DRM_FORCE_UNSPECIFIED,
+	DRM_FORCE_OFF,
+	DRM_FORCE_ON,         /* force on analog part normally */
+	DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */
+};
+
+/* should we poll this connector for connects and disconnects */
+/* hot plug detectable */
+#define DRM_CONNECTOR_POLL_HPD (1 << 0)
+/* poll for connections */
+#define DRM_CONNECTOR_POLL_CONNECT (1 << 1)
+/* can cleanly poll for disconnections without flickering the screen */
+/* DACs should rarely do this without a lot of testing */
+#define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2)
+
+#define MAX_ELD_BYTES	128
+
+/**
+ * drm_connector - central DRM connector control structure
+ * @dev: parent DRM device
+ * @kdev: kernel device for sysfs attributes
+ * @attr: sysfs attributes
+ * @head: list management
+ * @base: base KMS object
+ * @connector_type: one of the %DRM_MODE_CONNECTOR_<foo> types from drm_mode.h
+ * @connector_type_id: index into connector type enum
+ * @interlace_allowed: can this connector handle interlaced modes?
+ * @doublescan_allowed: can this connector handle doublescan?
+ * @modes: modes available on this connector (from fill_modes() + user)
+ * @status: one of the drm_connector_status enums (connected, not, or unknown)
+ * @probed_modes: list of modes derived directly from the display
+ * @display_info: information about attached display (e.g. from EDID)
+ * @funcs: connector control functions
+ * @user_modes: user added mode list
+ * @edid_blob_ptr: DRM property containing EDID if present
+ * @property_ids: property tracking for this connector
+ * @property_values: value pointers or data for properties
+ * @polled: a %DRM_CONNECTOR_POLL_<foo> value for core driven polling
+ * @dpms: current dpms state
+ * @helper_private: mid-layer private data
+ * @force: a %DRM_FORCE_<foo> state for forced mode sets
+ * @encoder_ids: valid encoders for this connector
+ * @encoder: encoder driving this connector, if any
+ * @eld: EDID-like data, if present
+ * @dvi_dual: dual link DVI, if found
+ * @max_tmds_clock: max clock rate, if found
+ * @latency_present: AV delay info from ELD, if found
+ * @video_latency: video latency info from ELD, if found
+ * @audio_latency: audio latency info from ELD, if found
+ * @null_edid_counter: track sinks that give us all zeros for the EDID
+ *
+ * Each connector may be connected to one or more CRTCs, or may be clonable by
+ * another connector if they can share a CRTC.  Each connector also has a specific
+ * position in the broader display (referred to as a 'screen' though it could
+ * span multiple monitors).
+ */
+struct drm_connector {
+	struct drm_device *dev;
+	struct device kdev;
+	struct device_attribute *attr;
+	struct list_head head;
+
+	struct drm_mode_object base;
+
+	int connector_type;
+	int connector_type_id;
+	bool interlace_allowed;
+	bool doublescan_allowed;
+	struct list_head modes; /* list of modes on this connector */
+
+	enum drm_connector_status status;
+
+	/* these are modes added by probing with DDC or the BIOS */
+	struct list_head probed_modes;
+
+	struct drm_display_info display_info;
+	const struct drm_connector_funcs *funcs;
+
+	struct list_head user_modes;
+	struct drm_property_blob *edid_blob_ptr;
+	u32 property_ids[DRM_CONNECTOR_MAX_PROPERTY];
+	uint64_t property_values[DRM_CONNECTOR_MAX_PROPERTY];
+
+	uint8_t polled; /* DRM_CONNECTOR_POLL_* */
+
+	/* requested DPMS state */
+	int dpms;
+
+	void *helper_private;
+
+	/* forced on connector */
+	enum drm_connector_force force;
+	uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER];
+	struct drm_encoder *encoder; /* currently active encoder */
+
+	/* EDID bits */
+	uint8_t eld[MAX_ELD_BYTES];
+	bool dvi_dual;
+	int max_tmds_clock;	/* in MHz */
+	bool latency_present[2];
+	int video_latency[2];	/* [0]: progressive, [1]: interlaced */
+	int audio_latency[2];
+	int null_edid_counter; /* needed to workaround some HW bugs where we get all 0s */
+};
+
+/**
+ * drm_plane_funcs - driver plane control functions
+ * @update_plane: update the plane configuration
+ * @disable_plane: shut down the plane
+ * @destroy: clean up plane resources
+ */
+struct drm_plane_funcs {
+	int (*update_plane)(struct drm_plane *plane,
+			    struct drm_crtc *crtc, struct drm_framebuffer *fb,
+			    int crtc_x, int crtc_y,
+			    unsigned int crtc_w, unsigned int crtc_h,
+			    uint32_t src_x, uint32_t src_y,
+			    uint32_t src_w, uint32_t src_h);
+	int (*disable_plane)(struct drm_plane *plane);
+	void (*destroy)(struct drm_plane *plane);
+};
+
+/**
+ * drm_plane - central DRM plane control structure
+ * @dev: DRM device this plane belongs to
+ * @head: for list management
+ * @base: base mode object
+ * @possible_crtcs: pipes this plane can be bound to
+ * @format_types: array of formats supported by this plane
+ * @format_count: number of formats supported
+ * @crtc: currently bound CRTC
+ * @fb: currently bound fb
+ * @gamma_size: size of gamma table
+ * @gamma_store: gamma correction table
+ * @enabled: enabled flag
+ * @funcs: helper functions
+ * @helper_private: storage for drver layer
+ */
+struct drm_plane {
+	struct drm_device *dev;
+	struct list_head head;
+
+	struct drm_mode_object base;
+
+	uint32_t possible_crtcs;
+	uint32_t *format_types;
+	uint32_t format_count;
+
+	struct drm_crtc *crtc;
+	struct drm_framebuffer *fb;
+
+	/* CRTC gamma size for reporting to userspace */
+	uint32_t gamma_size;
+	uint16_t *gamma_store;
+
+	bool enabled;
+
+	const struct drm_plane_funcs *funcs;
+	void *helper_private;
+};
+
+/**
+ * drm_mode_set - new values for a CRTC config change
+ * @head: list management
+ * @fb: framebuffer to use for new config
+ * @crtc: CRTC whose configuration we're about to change
+ * @mode: mode timings to use
+ * @x: position of this CRTC relative to @fb
+ * @y: position of this CRTC relative to @fb
+ * @connectors: array of connectors to drive with this CRTC if possible
+ * @num_connectors: size of @connectors array
+ *
+ * Represents a single crtc the connectors that it drives with what mode
+ * and from which framebuffer it scans out from.
+ *
+ * This is used to set modes.
+ */
+struct drm_mode_set {
+	struct list_head head;
+
+	struct drm_framebuffer *fb;
+	struct drm_crtc *crtc;
+	struct drm_display_mode *mode;
+
+	uint32_t x;
+	uint32_t y;
+
+	struct drm_connector **connectors;
+	size_t num_connectors;
+};
+
+/**
+ * struct drm_mode_config_funcs - basic driver provided mode setting functions
+ * @fb_create: create a new framebuffer object
+ * @output_poll_changed: function to handle output configuration changes
+ *
+ * Some global (i.e. not per-CRTC, connector, etc) mode setting functions that
+ * involve drivers.
+ */
+struct drm_mode_config_funcs {
+	struct drm_framebuffer *(*fb_create)(struct drm_device *dev,
+					     struct drm_file *file_priv,
+					     struct drm_mode_fb_cmd2 *mode_cmd);
+	void (*output_poll_changed)(struct drm_device *dev);
+};
+
+/**
+ * drm_mode_group - group of mode setting resources for potential sub-grouping
+ * @num_crtcs: CRTC count
+ * @num_encoders: encoder count
+ * @num_connectors: connector count
+ * @id_list: list of KMS object IDs in this group
+ *
+ * Currently this simply tracks the global mode setting state.  But in the
+ * future it could allow groups of objects to be set aside into independent
+ * control groups for use by different user level processes (e.g. two X servers
+ * running simultaneously on different heads, each with their own mode
+ * configuration and freedom of mode setting).
+ */
+struct drm_mode_group {
+	uint32_t num_crtcs;
+	uint32_t num_encoders;
+	uint32_t num_connectors;
+
+	/* list of object IDs for this group */
+	uint32_t *id_list;
+};
+
+/**
+ * drm_mode_config - Mode configuration control structure
+ * @mutex: mutex protecting KMS related lists and structures
+ * @idr_mutex: mutex for KMS ID allocation and management
+ * @crtc_idr: main KMS ID tracking object
+ * @num_fb: number of fbs available
+ * @fb_list: list of framebuffers available
+ * @num_connector: number of connectors on this device
+ * @connector_list: list of connector objects
+ * @num_encoder: number of encoders on this device
+ * @encoder_list: list of encoder objects
+ * @num_crtc: number of CRTCs on this device
+ * @crtc_list: list of CRTC objects
+ * @min_width: minimum pixel width on this device
+ * @min_height: minimum pixel height on this device
+ * @max_width: maximum pixel width on this device
+ * @max_height: maximum pixel height on this device
+ * @funcs: core driver provided mode setting functions
+ * @fb_base: base address of the framebuffer
+ * @poll_enabled: track polling status for this device
+ * @output_poll_work: delayed work for polling in process context
+ * @*_property: core property tracking
+ *
+ * Core mode resource tracking structure.  All CRTC, encoders, and connectors
+ * enumerated by the driver are added here, as are global properties.  Some
+ * global restrictions are also here, e.g. dimension restrictions.
+ */
+struct drm_mode_config {
+	struct mutex mutex; /* protects configuration (mode lists etc.) */
+	struct mutex idr_mutex; /* for IDR management */
+	struct idr crtc_idr; /* use this idr for all IDs, fb, crtc, connector, modes - just makes life easier */
+	/* this is limited to one for now */
+	int num_fb;
+	struct list_head fb_list;
+	int num_connector;
+	struct list_head connector_list;
+	int num_encoder;
+	struct list_head encoder_list;
+	int num_plane;
+	struct list_head plane_list;
+
+	int num_crtc;
+	struct list_head crtc_list;
+
+	struct list_head property_list;
+
+	int min_width, min_height;
+	int max_width, max_height;
+	struct drm_mode_config_funcs *funcs;
+	resource_size_t fb_base;
+
+	/* output poll support */
+	bool poll_enabled;
+	struct delayed_work output_poll_work;
+
+	/* pointers to standard properties */
+	struct list_head property_blob_list;
+	struct drm_property *edid_property;
+	struct drm_property *dpms_property;
+
+	/* DVI-I properties */
+	struct drm_property *dvi_i_subconnector_property;
+	struct drm_property *dvi_i_select_subconnector_property;
+
+	/* TV properties */
+	struct drm_property *tv_subconnector_property;
+	struct drm_property *tv_select_subconnector_property;
+	struct drm_property *tv_mode_property;
+	struct drm_property *tv_left_margin_property;
+	struct drm_property *tv_right_margin_property;
+	struct drm_property *tv_top_margin_property;
+	struct drm_property *tv_bottom_margin_property;
+	struct drm_property *tv_brightness_property;
+	struct drm_property *tv_contrast_property;
+	struct drm_property *tv_flicker_reduction_property;
+	struct drm_property *tv_overscan_property;
+	struct drm_property *tv_saturation_property;
+	struct drm_property *tv_hue_property;
+
+	/* Optional properties */
+	struct drm_property *scaling_mode_property;
+	struct drm_property *dithering_mode_property;
+	struct drm_property *dirty_info_property;
+
+	/* dumb ioctl parameters */
+	uint32_t preferred_depth, prefer_shadow;
+};
+
+#define obj_to_crtc(x) container_of(x, struct drm_crtc, base)
+#define obj_to_connector(x) container_of(x, struct drm_connector, base)
+#define obj_to_encoder(x) container_of(x, struct drm_encoder, base)
+#define obj_to_mode(x) container_of(x, struct drm_display_mode, base)
+#define obj_to_fb(x) container_of(x, struct drm_framebuffer, base)
+#define obj_to_property(x) container_of(x, struct drm_property, base)
+#define obj_to_blob(x) container_of(x, struct drm_property_blob, base)
+#define obj_to_plane(x) container_of(x, struct drm_plane, base)
+
+struct drm_prop_enum_list {
+	int type;
+	char *name;
+};
+
+extern int drm_crtc_init(struct drm_device *dev,
+			 struct drm_crtc *crtc,
+			 const struct drm_crtc_funcs *funcs);
+extern void drm_crtc_cleanup(struct drm_crtc *crtc);
+
+extern int drm_connector_init(struct drm_device *dev,
+			      struct drm_connector *connector,
+			      const struct drm_connector_funcs *funcs,
+			      int connector_type);
+
+extern void drm_connector_cleanup(struct drm_connector *connector);
+/* helper to unplug all connectors from sysfs for device */
+extern void drm_connector_unplug_all(struct drm_device *dev);
+
+extern int drm_encoder_init(struct drm_device *dev,
+			    struct drm_encoder *encoder,
+			    const struct drm_encoder_funcs *funcs,
+			    int encoder_type);
+
+extern int drm_plane_init(struct drm_device *dev,
+			  struct drm_plane *plane,
+			  unsigned long possible_crtcs,
+			  const struct drm_plane_funcs *funcs,
+			  const uint32_t *formats, uint32_t format_count,
+			  bool priv);
+extern void drm_plane_cleanup(struct drm_plane *plane);
+
+extern void drm_encoder_cleanup(struct drm_encoder *encoder);
+
+extern char *drm_get_connector_name(struct drm_connector *connector);
+extern char *drm_get_dpms_name(int val);
+extern char *drm_get_dvi_i_subconnector_name(int val);
+extern char *drm_get_dvi_i_select_name(int val);
+extern char *drm_get_tv_subconnector_name(int val);
+extern char *drm_get_tv_select_name(int val);
+extern void drm_fb_release(struct drm_file *file_priv);
+extern int drm_mode_group_init_legacy_group(struct drm_device *dev, struct drm_mode_group *group);
+extern struct edid *drm_get_edid(struct drm_connector *connector,
+				 struct i2c_adapter *adapter);
+extern int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid);
+extern void drm_mode_probed_add(struct drm_connector *connector, struct drm_display_mode *mode);
+extern void drm_mode_remove(struct drm_connector *connector, struct drm_display_mode *mode);
+extern void drm_mode_copy(struct drm_display_mode *dst, const struct drm_display_mode *src);
+extern struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev,
+						   const struct drm_display_mode *mode);
+extern void drm_mode_debug_printmodeline(struct drm_display_mode *mode);
+extern void drm_mode_config_init(struct drm_device *dev);
+extern void drm_mode_config_reset(struct drm_device *dev);
+extern void drm_mode_config_cleanup(struct drm_device *dev);
+extern void drm_mode_set_name(struct drm_display_mode *mode);
+extern bool drm_mode_equal(struct drm_display_mode *mode1, struct drm_display_mode *mode2);
+extern int drm_mode_width(struct drm_display_mode *mode);
+extern int drm_mode_height(struct drm_display_mode *mode);
+
+/* for us by fb module */
+extern int drm_mode_attachmode_crtc(struct drm_device *dev,
+				    struct drm_crtc *crtc,
+				    const struct drm_display_mode *mode);
+extern int drm_mode_detachmode_crtc(struct drm_device *dev, struct drm_display_mode *mode);
+
+extern struct drm_display_mode *drm_mode_create(struct drm_device *dev);
+extern void drm_mode_destroy(struct drm_device *dev, struct drm_display_mode *mode);
+extern void drm_mode_list_concat(struct list_head *head,
+				 struct list_head *new);
+extern void drm_mode_validate_size(struct drm_device *dev,
+				   struct list_head *mode_list,
+				   int maxX, int maxY, int maxPitch);
+extern void drm_mode_prune_invalid(struct drm_device *dev,
+				   struct list_head *mode_list, bool verbose);
+extern void drm_mode_sort(struct list_head *mode_list);
+extern int drm_mode_hsync(const struct drm_display_mode *mode);
+extern int drm_mode_vrefresh(const struct drm_display_mode *mode);
+extern void drm_mode_set_crtcinfo(struct drm_display_mode *p,
+				  int adjust_flags);
+extern void drm_mode_connector_list_update(struct drm_connector *connector);
+extern int drm_mode_connector_update_edid_property(struct drm_connector *connector,
+						struct edid *edid);
+extern int drm_connector_property_set_value(struct drm_connector *connector,
+					 struct drm_property *property,
+					 uint64_t value);
+extern int drm_connector_property_get_value(struct drm_connector *connector,
+					 struct drm_property *property,
+					 uint64_t *value);
+extern struct drm_display_mode *drm_crtc_mode_create(struct drm_device *dev);
+extern void drm_framebuffer_set_object(struct drm_device *dev,
+				       unsigned long handle);
+extern int drm_framebuffer_init(struct drm_device *dev,
+				struct drm_framebuffer *fb,
+				const struct drm_framebuffer_funcs *funcs);
+extern void drm_framebuffer_cleanup(struct drm_framebuffer *fb);
+extern int drmfb_probe(struct drm_device *dev, struct drm_crtc *crtc);
+extern int drmfb_remove(struct drm_device *dev, struct drm_framebuffer *fb);
+extern void drm_crtc_probe_connector_modes(struct drm_device *dev, int maxX, int maxY);
+extern bool drm_crtc_in_use(struct drm_crtc *crtc);
+
+extern int drm_connector_attach_property(struct drm_connector *connector,
+				      struct drm_property *property, uint64_t init_val);
+extern struct drm_property *drm_property_create(struct drm_device *dev, int flags,
+						const char *name, int num_values);
+extern struct drm_property *drm_property_create_enum(struct drm_device *dev, int flags,
+					 const char *name,
+					 const struct drm_prop_enum_list *props,
+					 int num_values);
+struct drm_property *drm_property_create_range(struct drm_device *dev, int flags,
+					 const char *name,
+					 uint64_t min, uint64_t max);
+extern void drm_property_destroy(struct drm_device *dev, struct drm_property *property);
+extern int drm_property_add_enum(struct drm_property *property, int index,
+				 uint64_t value, const char *name);
+extern int drm_mode_create_dvi_i_properties(struct drm_device *dev);
+extern int drm_mode_create_tv_properties(struct drm_device *dev, int num_formats,
+				     char *formats[]);
+extern int drm_mode_create_scaling_mode_property(struct drm_device *dev);
+extern int drm_mode_create_dithering_property(struct drm_device *dev);
+extern int drm_mode_create_dirty_info_property(struct drm_device *dev);
+extern char *drm_get_encoder_name(struct drm_encoder *encoder);
+
+extern int drm_mode_connector_attach_encoder(struct drm_connector *connector,
+					     struct drm_encoder *encoder);
+extern void drm_mode_connector_detach_encoder(struct drm_connector *connector,
+					   struct drm_encoder *encoder);
+extern int drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc,
+					 int gamma_size);
+extern struct drm_mode_object *drm_mode_object_find(struct drm_device *dev,
+		uint32_t id, uint32_t type);
+/* IOCTLs */
+extern int drm_mode_getresources(struct drm_device *dev,
+				 void *data, struct drm_file *file_priv);
+extern int drm_mode_getplane_res(struct drm_device *dev, void *data,
+				   struct drm_file *file_priv);
+extern int drm_mode_getcrtc(struct drm_device *dev,
+			    void *data, struct drm_file *file_priv);
+extern int drm_mode_getconnector(struct drm_device *dev,
+			      void *data, struct drm_file *file_priv);
+extern int drm_mode_setcrtc(struct drm_device *dev,
+			    void *data, struct drm_file *file_priv);
+extern int drm_mode_getplane(struct drm_device *dev,
+			       void *data, struct drm_file *file_priv);
+extern int drm_mode_setplane(struct drm_device *dev,
+			       void *data, struct drm_file *file_priv);
+extern int drm_mode_cursor_ioctl(struct drm_device *dev,
+				void *data, struct drm_file *file_priv);
+extern int drm_mode_addfb(struct drm_device *dev,
+			  void *data, struct drm_file *file_priv);
+extern int drm_mode_addfb2(struct drm_device *dev,
+			   void *data, struct drm_file *file_priv);
+extern uint32_t drm_mode_legacy_fb_format(uint32_t bpp, uint32_t depth);
+extern int drm_mode_rmfb(struct drm_device *dev,
+			 void *data, struct drm_file *file_priv);
+extern int drm_mode_getfb(struct drm_device *dev,
+			  void *data, struct drm_file *file_priv);
+extern int drm_mode_dirtyfb_ioctl(struct drm_device *dev,
+				  void *data, struct drm_file *file_priv);
+extern int drm_mode_addmode_ioctl(struct drm_device *dev,
+				  void *data, struct drm_file *file_priv);
+extern int drm_mode_rmmode_ioctl(struct drm_device *dev,
+				 void *data, struct drm_file *file_priv);
+extern int drm_mode_attachmode_ioctl(struct drm_device *dev,
+				     void *data, struct drm_file *file_priv);
+extern int drm_mode_detachmode_ioctl(struct drm_device *dev,
+				     void *data, struct drm_file *file_priv);
+
+extern int drm_mode_getproperty_ioctl(struct drm_device *dev,
+				      void *data, struct drm_file *file_priv);
+extern int drm_mode_getblob_ioctl(struct drm_device *dev,
+				  void *data, struct drm_file *file_priv);
+extern int drm_mode_connector_property_set_ioctl(struct drm_device *dev,
+					      void *data, struct drm_file *file_priv);
+extern int drm_mode_hotplug_ioctl(struct drm_device *dev,
+				  void *data, struct drm_file *file_priv);
+extern int drm_mode_replacefb(struct drm_device *dev,
+			      void *data, struct drm_file *file_priv);
+extern int drm_mode_getencoder(struct drm_device *dev,
+			       void *data, struct drm_file *file_priv);
+extern int drm_mode_gamma_get_ioctl(struct drm_device *dev,
+				    void *data, struct drm_file *file_priv);
+extern int drm_mode_gamma_set_ioctl(struct drm_device *dev,
+				    void *data, struct drm_file *file_priv);
+extern u8 *drm_find_cea_extension(struct edid *edid);
+extern bool drm_detect_hdmi_monitor(struct edid *edid);
+extern bool drm_detect_monitor_audio(struct edid *edid);
+extern int drm_mode_page_flip_ioctl(struct drm_device *dev,
+				    void *data, struct drm_file *file_priv);
+extern struct drm_display_mode *drm_cvt_mode(struct drm_device *dev,
+				int hdisplay, int vdisplay, int vrefresh,
+				bool reduced, bool interlaced, bool margins);
+extern struct drm_display_mode *drm_gtf_mode(struct drm_device *dev,
+				int hdisplay, int vdisplay, int vrefresh,
+				bool interlaced, int margins);
+extern struct drm_display_mode *drm_gtf_mode_complex(struct drm_device *dev,
+				int hdisplay, int vdisplay, int vrefresh,
+				bool interlaced, int margins, int GTF_M,
+				int GTF_2C, int GTF_K, int GTF_2J);
+extern int drm_add_modes_noedid(struct drm_connector *connector,
+				int hdisplay, int vdisplay);
+
+extern int drm_edid_header_is_valid(const u8 *raw_edid);
+extern bool drm_edid_block_valid(u8 *raw_edid);
+extern bool drm_edid_is_valid(struct edid *edid);
+struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev,
+					   int hsize, int vsize, int fresh);
+
+extern int drm_mode_create_dumb_ioctl(struct drm_device *dev,
+				      void *data, struct drm_file *file_priv);
+extern int drm_mode_mmap_dumb_ioctl(struct drm_device *dev,
+				    void *data, struct drm_file *file_priv);
+extern int drm_mode_destroy_dumb_ioctl(struct drm_device *dev,
+				      void *data, struct drm_file *file_priv);
+
+extern void drm_fb_get_bpp_depth(uint32_t format, unsigned int *depth,
+				 int *bpp);
+#endif /* __DRM_CRTC_H__ */
diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h
new file mode 100644
index 00000000..37515d1a
--- /dev/null
+++ b/include/drm/drm_crtc_helper.h
@@ -0,0 +1,150 @@
+/*
+ * Copyright © 2006 Keith Packard
+ * Copyright © 2007-2008 Dave Airlie
+ * Copyright © 2007-2008 Intel Corporation
+ *   Jesse Barnes <jesse.barnes@intel.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The DRM mode setting helper functions are common code for drivers to use if
+ * they wish.  Drivers are not forced to use this code in their
+ * implementations but it would be useful if they code they do use at least
+ * provides a consistent interface and operation to userspace
+ */
+
+#ifndef __DRM_CRTC_HELPER_H__
+#define __DRM_CRTC_HELPER_H__
+
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/idr.h>
+
+#include <linux/fb.h>
+
+enum mode_set_atomic {
+	LEAVE_ATOMIC_MODE_SET,
+	ENTER_ATOMIC_MODE_SET,
+};
+
+struct drm_crtc_helper_funcs {
+	/*
+	 * Control power levels on the CRTC.  If the mode passed in is
+	 * unsupported, the provider must use the next lowest power level.
+	 */
+	void (*dpms)(struct drm_crtc *crtc, int mode);
+	void (*prepare)(struct drm_crtc *crtc);
+	void (*commit)(struct drm_crtc *crtc);
+
+	/* Provider can fixup or change mode timings before modeset occurs */
+	bool (*mode_fixup)(struct drm_crtc *crtc,
+			   struct drm_display_mode *mode,
+			   struct drm_display_mode *adjusted_mode);
+	/* Actually set the mode */
+	int (*mode_set)(struct drm_crtc *crtc, struct drm_display_mode *mode,
+			struct drm_display_mode *adjusted_mode, int x, int y,
+			struct drm_framebuffer *old_fb);
+
+	/* Move the crtc on the current fb to the given position *optional* */
+	int (*mode_set_base)(struct drm_crtc *crtc, int x, int y,
+			     struct drm_framebuffer *old_fb);
+	int (*mode_set_base_atomic)(struct drm_crtc *crtc,
+				    struct drm_framebuffer *fb, int x, int y,
+				    enum mode_set_atomic);
+
+	/* reload the current crtc LUT */
+	void (*load_lut)(struct drm_crtc *crtc);
+
+	/* disable crtc when not in use - more explicit than dpms off */
+	void (*disable)(struct drm_crtc *crtc);
+};
+
+struct drm_encoder_helper_funcs {
+	void (*dpms)(struct drm_encoder *encoder, int mode);
+	void (*save)(struct drm_encoder *encoder);
+	void (*restore)(struct drm_encoder *encoder);
+
+	bool (*mode_fixup)(struct drm_encoder *encoder,
+			   struct drm_display_mode *mode,
+			   struct drm_display_mode *adjusted_mode);
+	void (*prepare)(struct drm_encoder *encoder);
+	void (*commit)(struct drm_encoder *encoder);
+	void (*mode_set)(struct drm_encoder *encoder,
+			 struct drm_display_mode *mode,
+			 struct drm_display_mode *adjusted_mode);
+	struct drm_crtc *(*get_crtc)(struct drm_encoder *encoder);
+	/* detect for DAC style encoders */
+	enum drm_connector_status (*detect)(struct drm_encoder *encoder,
+					    struct drm_connector *connector);
+	/* disable encoder when not in use - more explicit than dpms off */
+	void (*disable)(struct drm_encoder *encoder);
+};
+
+struct drm_connector_helper_funcs {
+	int (*get_modes)(struct drm_connector *connector);
+	int (*mode_valid)(struct drm_connector *connector,
+			  struct drm_display_mode *mode);
+	struct drm_encoder *(*best_encoder)(struct drm_connector *connector);
+};
+
+extern int drm_helper_probe_single_connector_modes(struct drm_connector *connector, uint32_t maxX, uint32_t maxY);
+extern void drm_helper_disable_unused_functions(struct drm_device *dev);
+extern int drm_crtc_helper_set_config(struct drm_mode_set *set);
+extern bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
+				     struct drm_display_mode *mode,
+				     int x, int y,
+				     struct drm_framebuffer *old_fb);
+extern bool drm_helper_crtc_in_use(struct drm_crtc *crtc);
+extern bool drm_helper_encoder_in_use(struct drm_encoder *encoder);
+
+extern void drm_helper_connector_dpms(struct drm_connector *connector, int mode);
+
+extern int drm_helper_mode_fill_fb_struct(struct drm_framebuffer *fb,
+					  struct drm_mode_fb_cmd2 *mode_cmd);
+
+static inline void drm_crtc_helper_add(struct drm_crtc *crtc,
+				       const struct drm_crtc_helper_funcs *funcs)
+{
+	crtc->helper_private = (void *)funcs;
+}
+
+static inline void drm_encoder_helper_add(struct drm_encoder *encoder,
+					  const struct drm_encoder_helper_funcs *funcs)
+{
+	encoder->helper_private = (void *)funcs;
+}
+
+static inline void drm_connector_helper_add(struct drm_connector *connector,
+					    const struct drm_connector_helper_funcs *funcs)
+{
+	connector->helper_private = (void *)funcs;
+}
+
+extern int drm_helper_resume_force_mode(struct drm_device *dev);
+extern void drm_kms_helper_poll_init(struct drm_device *dev);
+extern void drm_kms_helper_poll_fini(struct drm_device *dev);
+extern void drm_helper_hpd_irq_event(struct drm_device *dev);
+
+extern void drm_kms_helper_poll_disable(struct drm_device *dev);
+extern void drm_kms_helper_poll_enable(struct drm_device *dev);
+
+extern int drm_format_num_planes(uint32_t format);
+
+#endif
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
new file mode 100644
index 00000000..93df2d72
--- /dev/null
+++ b/include/drm/drm_dp_helper.h
@@ -0,0 +1,252 @@
+/*
+ * Copyright © 2008 Keith Packard
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  The copyright holders make no representations
+ * about the suitability of this software for any purpose.  It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#ifndef _DRM_DP_HELPER_H_
+#define _DRM_DP_HELPER_H_
+
+#include <linux/types.h>
+#include <linux/i2c.h>
+
+/* From the VESA DisplayPort spec */
+
+#define AUX_NATIVE_WRITE	0x8
+#define AUX_NATIVE_READ		0x9
+#define AUX_I2C_WRITE		0x0
+#define AUX_I2C_READ		0x1
+#define AUX_I2C_STATUS		0x2
+#define AUX_I2C_MOT		0x4
+
+#define AUX_NATIVE_REPLY_ACK	(0x0 << 4)
+#define AUX_NATIVE_REPLY_NACK	(0x1 << 4)
+#define AUX_NATIVE_REPLY_DEFER	(0x2 << 4)
+#define AUX_NATIVE_REPLY_MASK	(0x3 << 4)
+
+#define AUX_I2C_REPLY_ACK	(0x0 << 6)
+#define AUX_I2C_REPLY_NACK	(0x1 << 6)
+#define AUX_I2C_REPLY_DEFER	(0x2 << 6)
+#define AUX_I2C_REPLY_MASK	(0x3 << 6)
+
+/* AUX CH addresses */
+/* DPCD */
+#define DP_DPCD_REV                         0x000
+
+#define DP_MAX_LINK_RATE                    0x001
+
+#define DP_MAX_LANE_COUNT                   0x002
+# define DP_MAX_LANE_COUNT_MASK		    0x1f
+# define DP_TPS3_SUPPORTED		    (1 << 6)
+# define DP_ENHANCED_FRAME_CAP		    (1 << 7)
+
+#define DP_MAX_DOWNSPREAD                   0x003
+# define DP_NO_AUX_HANDSHAKE_LINK_TRAINING  (1 << 6)
+
+#define DP_NORP                             0x004
+
+#define DP_DOWNSTREAMPORT_PRESENT           0x005
+# define DP_DWN_STRM_PORT_PRESENT           (1 << 0)
+# define DP_DWN_STRM_PORT_TYPE_MASK         0x06
+/* 00b = DisplayPort */
+/* 01b = Analog */
+/* 10b = TMDS or HDMI */
+/* 11b = Other */
+# define DP_FORMAT_CONVERSION               (1 << 3)
+
+#define DP_MAIN_LINK_CHANNEL_CODING         0x006
+
+#define DP_EDP_CONFIGURATION_CAP            0x00d
+#define DP_TRAINING_AUX_RD_INTERVAL         0x00e
+
+#define DP_PSR_SUPPORT                      0x070
+# define DP_PSR_IS_SUPPORTED                1
+#define DP_PSR_CAPS                         0x071
+# define DP_PSR_NO_TRAIN_ON_EXIT            1
+# define DP_PSR_SETUP_TIME_330              (0 << 1)
+# define DP_PSR_SETUP_TIME_275              (1 << 1)
+# define DP_PSR_SETUP_TIME_220              (2 << 1)
+# define DP_PSR_SETUP_TIME_165              (3 << 1)
+# define DP_PSR_SETUP_TIME_110              (4 << 1)
+# define DP_PSR_SETUP_TIME_55               (5 << 1)
+# define DP_PSR_SETUP_TIME_0                (6 << 1)
+# define DP_PSR_SETUP_TIME_MASK             (7 << 1)
+# define DP_PSR_SETUP_TIME_SHIFT            1
+
+/* link configuration */
+#define	DP_LINK_BW_SET		            0x100
+# define DP_LINK_BW_1_62		    0x06
+# define DP_LINK_BW_2_7			    0x0a
+# define DP_LINK_BW_5_4			    0x14
+
+#define DP_LANE_COUNT_SET	            0x101
+# define DP_LANE_COUNT_MASK		    0x0f
+# define DP_LANE_COUNT_ENHANCED_FRAME_EN    (1 << 7)
+
+#define DP_TRAINING_PATTERN_SET	            0x102
+# define DP_TRAINING_PATTERN_DISABLE	    0
+# define DP_TRAINING_PATTERN_1		    1
+# define DP_TRAINING_PATTERN_2		    2
+# define DP_TRAINING_PATTERN_3		    3
+# define DP_TRAINING_PATTERN_MASK	    0x3
+
+# define DP_LINK_QUAL_PATTERN_DISABLE	    (0 << 2)
+# define DP_LINK_QUAL_PATTERN_D10_2	    (1 << 2)
+# define DP_LINK_QUAL_PATTERN_ERROR_RATE    (2 << 2)
+# define DP_LINK_QUAL_PATTERN_PRBS7	    (3 << 2)
+# define DP_LINK_QUAL_PATTERN_MASK	    (3 << 2)
+
+# define DP_RECOVERED_CLOCK_OUT_EN	    (1 << 4)
+# define DP_LINK_SCRAMBLING_DISABLE	    (1 << 5)
+
+# define DP_SYMBOL_ERROR_COUNT_BOTH	    (0 << 6)
+# define DP_SYMBOL_ERROR_COUNT_DISPARITY    (1 << 6)
+# define DP_SYMBOL_ERROR_COUNT_SYMBOL	    (2 << 6)
+# define DP_SYMBOL_ERROR_COUNT_MASK	    (3 << 6)
+
+#define DP_TRAINING_LANE0_SET		    0x103
+#define DP_TRAINING_LANE1_SET		    0x104
+#define DP_TRAINING_LANE2_SET		    0x105
+#define DP_TRAINING_LANE3_SET		    0x106
+
+# define DP_TRAIN_VOLTAGE_SWING_MASK	    0x3
+# define DP_TRAIN_VOLTAGE_SWING_SHIFT	    0
+# define DP_TRAIN_MAX_SWING_REACHED	    (1 << 2)
+# define DP_TRAIN_VOLTAGE_SWING_400	    (0 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_600	    (1 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_800	    (2 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_1200	    (3 << 0)
+
+# define DP_TRAIN_PRE_EMPHASIS_MASK	    (3 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_0	    (0 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_3_5	    (1 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_6	    (2 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_9_5	    (3 << 3)
+
+# define DP_TRAIN_PRE_EMPHASIS_SHIFT	    3
+# define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED  (1 << 5)
+
+#define DP_DOWNSPREAD_CTRL		    0x107
+# define DP_SPREAD_AMP_0_5		    (1 << 4)
+
+#define DP_MAIN_LINK_CHANNEL_CODING_SET	    0x108
+# define DP_SET_ANSI_8B10B		    (1 << 0)
+
+#define DP_PSR_EN_CFG			    0x170
+# define DP_PSR_ENABLE			    (1 << 0)
+# define DP_PSR_MAIN_LINK_ACTIVE	    (1 << 1)
+# define DP_PSR_CRC_VERIFICATION	    (1 << 2)
+# define DP_PSR_FRAME_CAPTURE		    (1 << 3)
+
+#define DP_DEVICE_SERVICE_IRQ_VECTOR	    0x201
+# define DP_REMOTE_CONTROL_COMMAND_PENDING  (1 << 0)
+# define DP_AUTOMATED_TEST_REQUEST	    (1 << 1)
+# define DP_CP_IRQ			    (1 << 2)
+# define DP_SINK_SPECIFIC_IRQ		    (1 << 6)
+
+#define DP_EDP_CONFIGURATION_SET            0x10a
+
+#define DP_LANE0_1_STATUS		    0x202
+#define DP_LANE2_3_STATUS		    0x203
+# define DP_LANE_CR_DONE		    (1 << 0)
+# define DP_LANE_CHANNEL_EQ_DONE	    (1 << 1)
+# define DP_LANE_SYMBOL_LOCKED		    (1 << 2)
+
+#define DP_CHANNEL_EQ_BITS (DP_LANE_CR_DONE |		\
+			    DP_LANE_CHANNEL_EQ_DONE |	\
+			    DP_LANE_SYMBOL_LOCKED)
+
+#define DP_LANE_ALIGN_STATUS_UPDATED	    0x204
+
+#define DP_INTERLANE_ALIGN_DONE		    (1 << 0)
+#define DP_DOWNSTREAM_PORT_STATUS_CHANGED   (1 << 6)
+#define DP_LINK_STATUS_UPDATED		    (1 << 7)
+
+#define DP_SINK_STATUS			    0x205
+
+#define DP_RECEIVE_PORT_0_STATUS	    (1 << 0)
+#define DP_RECEIVE_PORT_1_STATUS	    (1 << 1)
+
+#define DP_ADJUST_REQUEST_LANE0_1	    0x206
+#define DP_ADJUST_REQUEST_LANE2_3	    0x207
+# define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK  0x03
+# define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT 0
+# define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK   0x0c
+# define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT  2
+# define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK  0x30
+# define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT 4
+# define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK   0xc0
+# define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT  6
+
+#define DP_TEST_REQUEST			    0x218
+# define DP_TEST_LINK_TRAINING		    (1 << 0)
+# define DP_TEST_LINK_PATTERN		    (1 << 1)
+# define DP_TEST_LINK_EDID_READ		    (1 << 2)
+# define DP_TEST_LINK_PHY_TEST_PATTERN	    (1 << 3) /* DPCD >= 1.1 */
+
+#define DP_TEST_LINK_RATE		    0x219
+# define DP_LINK_RATE_162		    (0x6)
+# define DP_LINK_RATE_27		    (0xa)
+
+#define DP_TEST_LANE_COUNT		    0x220
+
+#define DP_TEST_PATTERN			    0x221
+
+#define DP_TEST_RESPONSE		    0x260
+# define DP_TEST_ACK			    (1 << 0)
+# define DP_TEST_NAK			    (1 << 1)
+# define DP_TEST_EDID_CHECKSUM_WRITE	    (1 << 2)
+
+#define DP_SET_POWER                        0x600
+# define DP_SET_POWER_D0                    0x1
+# define DP_SET_POWER_D3                    0x2
+
+#define DP_PSR_ERROR_STATUS                 0x2006
+# define DP_PSR_LINK_CRC_ERROR              (1 << 0)
+# define DP_PSR_RFB_STORAGE_ERROR           (1 << 1)
+
+#define DP_PSR_ESI                          0x2007
+# define DP_PSR_CAPS_CHANGE                 (1 << 0)
+
+#define DP_PSR_STATUS                       0x2008
+# define DP_PSR_SINK_INACTIVE               0
+# define DP_PSR_SINK_ACTIVE_SRC_SYNCED      1
+# define DP_PSR_SINK_ACTIVE_RFB             2
+# define DP_PSR_SINK_ACTIVE_SINK_SYNCED     3
+# define DP_PSR_SINK_ACTIVE_RESYNC          4
+# define DP_PSR_SINK_INTERNAL_ERROR         7
+# define DP_PSR_SINK_STATE_MASK             0x07
+
+#define MODE_I2C_START	1
+#define MODE_I2C_WRITE	2
+#define MODE_I2C_READ	4
+#define MODE_I2C_STOP	8
+
+struct i2c_algo_dp_aux_data {
+	bool running;
+	u16 address;
+	int (*aux_ch) (struct i2c_adapter *adapter,
+		       int mode, uint8_t write_byte,
+		       uint8_t *read_byte);
+};
+
+int
+i2c_dp_aux_add_bus(struct i2c_adapter *adapter);
+
+#endif /* _DRM_DP_HELPER_H_ */
diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
new file mode 100644
index 00000000..bcb9a66b
--- /dev/null
+++ b/include/drm/drm_edid.h
@@ -0,0 +1,243 @@
+/*
+ * Copyright © 2007-2008 Intel Corporation
+ *   Jesse Barnes <jesse.barnes@intel.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#ifndef __DRM_EDID_H__
+#define __DRM_EDID_H__
+
+#include <linux/types.h>
+
+#define EDID_LENGTH 128
+#define DDC_ADDR 0x50
+
+#define CEA_EXT	    0x02
+#define VTB_EXT	    0x10
+#define DI_EXT	    0x40
+#define LS_EXT	    0x50
+#define MI_EXT	    0x60
+
+struct est_timings {
+	u8 t1;
+	u8 t2;
+	u8 mfg_rsvd;
+} __attribute__((packed));
+
+/* 00=16:10, 01=4:3, 10=5:4, 11=16:9 */
+#define EDID_TIMING_ASPECT_SHIFT 6
+#define EDID_TIMING_ASPECT_MASK  (0x3 << EDID_TIMING_ASPECT_SHIFT)
+
+/* need to add 60 */
+#define EDID_TIMING_VFREQ_SHIFT  0
+#define EDID_TIMING_VFREQ_MASK   (0x3f << EDID_TIMING_VFREQ_SHIFT)
+
+struct std_timing {
+	u8 hsize; /* need to multiply by 8 then add 248 */
+	u8 vfreq_aspect;
+} __attribute__((packed));
+
+#define DRM_EDID_PT_HSYNC_POSITIVE (1 << 1)
+#define DRM_EDID_PT_VSYNC_POSITIVE (1 << 2)
+#define DRM_EDID_PT_SEPARATE_SYNC  (3 << 3)
+#define DRM_EDID_PT_STEREO         (1 << 5)
+#define DRM_EDID_PT_INTERLACED     (1 << 7)
+
+/* If detailed data is pixel timing */
+struct detailed_pixel_timing {
+	u8 hactive_lo;
+	u8 hblank_lo;
+	u8 hactive_hblank_hi;
+	u8 vactive_lo;
+	u8 vblank_lo;
+	u8 vactive_vblank_hi;
+	u8 hsync_offset_lo;
+	u8 hsync_pulse_width_lo;
+	u8 vsync_offset_pulse_width_lo;
+	u8 hsync_vsync_offset_pulse_width_hi;
+	u8 width_mm_lo;
+	u8 height_mm_lo;
+	u8 width_height_mm_hi;
+	u8 hborder;
+	u8 vborder;
+	u8 misc;
+} __attribute__((packed));
+
+/* If it's not pixel timing, it'll be one of the below */
+struct detailed_data_string {
+	u8 str[13];
+} __attribute__((packed));
+
+struct detailed_data_monitor_range {
+	u8 min_vfreq;
+	u8 max_vfreq;
+	u8 min_hfreq_khz;
+	u8 max_hfreq_khz;
+	u8 pixel_clock_mhz; /* need to multiply by 10 */
+	__le16 sec_gtf_toggle; /* A000=use above, 20=use below */
+	u8 hfreq_start_khz; /* need to multiply by 2 */
+	u8 c; /* need to divide by 2 */
+	__le16 m;
+	u8 k;
+	u8 j; /* need to divide by 2 */
+} __attribute__((packed));
+
+struct detailed_data_wpindex {
+	u8 white_yx_lo; /* Lower 2 bits each */
+	u8 white_x_hi;
+	u8 white_y_hi;
+	u8 gamma; /* need to divide by 100 then add 1 */
+} __attribute__((packed));
+
+struct detailed_data_color_point {
+	u8 windex1;
+	u8 wpindex1[3];
+	u8 windex2;
+	u8 wpindex2[3];
+} __attribute__((packed));
+
+struct cvt_timing {
+	u8 code[3];
+} __attribute__((packed));
+
+struct detailed_non_pixel {
+	u8 pad1;
+	u8 type; /* ff=serial, fe=string, fd=monitor range, fc=monitor name
+		    fb=color point data, fa=standard timing data,
+		    f9=undefined, f8=mfg. reserved */
+	u8 pad2;
+	union {
+		struct detailed_data_string str;
+		struct detailed_data_monitor_range range;
+		struct detailed_data_wpindex color;
+		struct std_timing timings[6];
+		struct cvt_timing cvt[4];
+	} data;
+} __attribute__((packed));
+
+#define EDID_DETAIL_EST_TIMINGS 0xf7
+#define EDID_DETAIL_CVT_3BYTE 0xf8
+#define EDID_DETAIL_COLOR_MGMT_DATA 0xf9
+#define EDID_DETAIL_STD_MODES 0xfa
+#define EDID_DETAIL_MONITOR_CPDATA 0xfb
+#define EDID_DETAIL_MONITOR_NAME 0xfc
+#define EDID_DETAIL_MONITOR_RANGE 0xfd
+#define EDID_DETAIL_MONITOR_STRING 0xfe
+#define EDID_DETAIL_MONITOR_SERIAL 0xff
+
+struct detailed_timing {
+	__le16 pixel_clock; /* need to multiply by 10 KHz */
+	union {
+		struct detailed_pixel_timing pixel_data;
+		struct detailed_non_pixel other_data;
+	} data;
+} __attribute__((packed));
+
+#define DRM_EDID_INPUT_SERRATION_VSYNC (1 << 0)
+#define DRM_EDID_INPUT_SYNC_ON_GREEN   (1 << 1)
+#define DRM_EDID_INPUT_COMPOSITE_SYNC  (1 << 2)
+#define DRM_EDID_INPUT_SEPARATE_SYNCS  (1 << 3)
+#define DRM_EDID_INPUT_BLANK_TO_BLACK  (1 << 4)
+#define DRM_EDID_INPUT_VIDEO_LEVEL     (3 << 5)
+#define DRM_EDID_INPUT_DIGITAL         (1 << 7)
+#define DRM_EDID_DIGITAL_DEPTH_MASK    (7 << 4)
+#define DRM_EDID_DIGITAL_DEPTH_UNDEF   (0 << 4)
+#define DRM_EDID_DIGITAL_DEPTH_6       (1 << 4)
+#define DRM_EDID_DIGITAL_DEPTH_8       (2 << 4)
+#define DRM_EDID_DIGITAL_DEPTH_10      (3 << 4)
+#define DRM_EDID_DIGITAL_DEPTH_12      (4 << 4)
+#define DRM_EDID_DIGITAL_DEPTH_14      (5 << 4)
+#define DRM_EDID_DIGITAL_DEPTH_16      (6 << 4)
+#define DRM_EDID_DIGITAL_DEPTH_RSVD    (7 << 4)
+#define DRM_EDID_DIGITAL_TYPE_UNDEF    (0)
+#define DRM_EDID_DIGITAL_TYPE_DVI      (1)
+#define DRM_EDID_DIGITAL_TYPE_HDMI_A   (2)
+#define DRM_EDID_DIGITAL_TYPE_HDMI_B   (3)
+#define DRM_EDID_DIGITAL_TYPE_MDDI     (4)
+#define DRM_EDID_DIGITAL_TYPE_DP       (5)
+
+#define DRM_EDID_FEATURE_DEFAULT_GTF      (1 << 0)
+#define DRM_EDID_FEATURE_PREFERRED_TIMING (1 << 1)
+#define DRM_EDID_FEATURE_STANDARD_COLOR   (1 << 2)
+/* If analog */
+#define DRM_EDID_FEATURE_DISPLAY_TYPE     (3 << 3) /* 00=mono, 01=rgb, 10=non-rgb, 11=unknown */
+/* If digital */
+#define DRM_EDID_FEATURE_COLOR_MASK	  (3 << 3)
+#define DRM_EDID_FEATURE_RGB		  (0 << 3)
+#define DRM_EDID_FEATURE_RGB_YCRCB444	  (1 << 3)
+#define DRM_EDID_FEATURE_RGB_YCRCB422	  (2 << 3)
+#define DRM_EDID_FEATURE_RGB_YCRCB	  (3 << 3) /* both 4:4:4 and 4:2:2 */
+
+#define DRM_EDID_FEATURE_PM_ACTIVE_OFF    (1 << 5)
+#define DRM_EDID_FEATURE_PM_SUSPEND       (1 << 6)
+#define DRM_EDID_FEATURE_PM_STANDBY       (1 << 7)
+
+struct edid {
+	u8 header[8];
+	/* Vendor & product info */
+	u8 mfg_id[2];
+	u8 prod_code[2];
+	u32 serial; /* FIXME: byte order */
+	u8 mfg_week;
+	u8 mfg_year;
+	/* EDID version */
+	u8 version;
+	u8 revision;
+	/* Display info: */
+	u8 input;
+	u8 width_cm;
+	u8 height_cm;
+	u8 gamma;
+	u8 features;
+	/* Color characteristics */
+	u8 red_green_lo;
+	u8 black_white_lo;
+	u8 red_x;
+	u8 red_y;
+	u8 green_x;
+	u8 green_y;
+	u8 blue_x;
+	u8 blue_y;
+	u8 white_x;
+	u8 white_y;
+	/* Est. timings and mfg rsvd timings*/
+	struct est_timings established_timings;
+	/* Standard timings 1-8*/
+	struct std_timing standard_timings[8];
+	/* Detailing timings 1-4 */
+	struct detailed_timing detailed_timings[4];
+	/* Number of 128 byte ext. blocks */
+	u8 extensions;
+	/* Checksum */
+	u8 checksum;
+} __attribute__((packed));
+
+#define EDID_PRODUCT_ID(e) ((e)->prod_code[0] | ((e)->prod_code[1] << 8))
+
+struct drm_encoder;
+struct drm_connector;
+struct drm_display_mode;
+void drm_edid_to_eld(struct drm_connector *connector, struct edid *edid);
+int drm_av_sync_delay(struct drm_connector *connector,
+		      struct drm_display_mode *mode);
+struct drm_connector *drm_select_eld(struct drm_encoder *encoder,
+				     struct drm_display_mode *mode);
+int drm_load_edid_firmware(struct drm_connector *connector);
+
+#endif /* __DRM_EDID_H__ */
diff --git a/include/drm/drm_encoder_slave.h b/include/drm/drm_encoder_slave.h
new file mode 100644
index 00000000..2f65633d
--- /dev/null
+++ b/include/drm/drm_encoder_slave.h
@@ -0,0 +1,162 @@
+/*
+ * Copyright (C) 2009 Francisco Jerez.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial
+ * portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE
+ * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+ * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifndef __DRM_ENCODER_SLAVE_H__
+#define __DRM_ENCODER_SLAVE_H__
+
+#include "drmP.h"
+#include "drm_crtc.h"
+
+/**
+ * struct drm_encoder_slave_funcs - Entry points exposed by a slave encoder driver
+ * @set_config:	Initialize any encoder-specific modesetting parameters.
+ *		The meaning of the @params parameter is implementation
+ *		dependent. It will usually be a structure with DVO port
+ *		data format settings or timings. It's not required for
+ *		the new parameters to take effect until the next mode
+ *		is set.
+ *
+ * Most of its members are analogous to the function pointers in
+ * &drm_encoder_helper_funcs and they can optionally be used to
+ * initialize the latter. Connector-like methods (e.g. @get_modes and
+ * @set_property) will typically be wrapped around and only be called
+ * if the encoder is the currently selected one for the connector.
+ */
+struct drm_encoder_slave_funcs {
+	void (*set_config)(struct drm_encoder *encoder,
+			   void *params);
+
+	void (*destroy)(struct drm_encoder *encoder);
+	void (*dpms)(struct drm_encoder *encoder, int mode);
+	void (*save)(struct drm_encoder *encoder);
+	void (*restore)(struct drm_encoder *encoder);
+	bool (*mode_fixup)(struct drm_encoder *encoder,
+			   struct drm_display_mode *mode,
+			   struct drm_display_mode *adjusted_mode);
+	int (*mode_valid)(struct drm_encoder *encoder,
+			  struct drm_display_mode *mode);
+	void (*mode_set)(struct drm_encoder *encoder,
+			 struct drm_display_mode *mode,
+			 struct drm_display_mode *adjusted_mode);
+
+	enum drm_connector_status (*detect)(struct drm_encoder *encoder,
+					    struct drm_connector *connector);
+	int (*get_modes)(struct drm_encoder *encoder,
+			 struct drm_connector *connector);
+	int (*create_resources)(struct drm_encoder *encoder,
+				 struct drm_connector *connector);
+	int (*set_property)(struct drm_encoder *encoder,
+			    struct drm_connector *connector,
+			    struct drm_property *property,
+			    uint64_t val);
+
+};
+
+/**
+ * struct drm_encoder_slave - Slave encoder struct
+ * @base: DRM encoder object.
+ * @slave_funcs: Slave encoder callbacks.
+ * @slave_priv: Slave encoder private data.
+ * @bus_priv: Bus specific data.
+ *
+ * A &drm_encoder_slave has two sets of callbacks, @slave_funcs and the
+ * ones in @base. The former are never actually called by the common
+ * CRTC code, it's just a convenience for splitting the encoder
+ * functions in an upper, GPU-specific layer and a (hopefully)
+ * GPU-agnostic lower layer: It's the GPU driver responsibility to
+ * call the slave methods when appropriate.
+ *
+ * drm_i2c_encoder_init() provides a way to get an implementation of
+ * this.
+ */
+struct drm_encoder_slave {
+	struct drm_encoder base;
+
+	struct drm_encoder_slave_funcs *slave_funcs;
+	void *slave_priv;
+	void *bus_priv;
+};
+#define to_encoder_slave(x) container_of((x), struct drm_encoder_slave, base)
+
+int drm_i2c_encoder_init(struct drm_device *dev,
+			 struct drm_encoder_slave *encoder,
+			 struct i2c_adapter *adap,
+			 const struct i2c_board_info *info);
+
+
+/**
+ * struct drm_i2c_encoder_driver
+ *
+ * Describes a device driver for an encoder connected to the GPU
+ * through an I2C bus. In addition to the entry points in @i2c_driver
+ * an @encoder_init function should be provided. It will be called to
+ * give the driver an opportunity to allocate any per-encoder data
+ * structures and to initialize the @slave_funcs and (optionally)
+ * @slave_priv members of @encoder.
+ */
+struct drm_i2c_encoder_driver {
+	struct i2c_driver i2c_driver;
+
+	int (*encoder_init)(struct i2c_client *client,
+			    struct drm_device *dev,
+			    struct drm_encoder_slave *encoder);
+
+};
+#define to_drm_i2c_encoder_driver(x) container_of((x),			\
+						  struct drm_i2c_encoder_driver, \
+						  i2c_driver)
+
+/**
+ * drm_i2c_encoder_get_client - Get the I2C client corresponding to an encoder
+ */
+static inline struct i2c_client *drm_i2c_encoder_get_client(struct drm_encoder *encoder)
+{
+	return (struct i2c_client *)to_encoder_slave(encoder)->bus_priv;
+}
+
+/**
+ * drm_i2c_encoder_register - Register an I2C encoder driver
+ * @owner:	Module containing the driver.
+ * @driver:	Driver to be registered.
+ */
+static inline int drm_i2c_encoder_register(struct module *owner,
+					   struct drm_i2c_encoder_driver *driver)
+{
+	return i2c_register_driver(owner, &driver->i2c_driver);
+}
+
+/**
+ * drm_i2c_encoder_unregister - Unregister an I2C encoder driver
+ * @driver:	Driver to be unregistered.
+ */
+static inline void drm_i2c_encoder_unregister(struct drm_i2c_encoder_driver *driver)
+{
+	i2c_del_driver(&driver->i2c_driver);
+}
+
+void drm_i2c_encoder_destroy(struct drm_encoder *encoder);
+
+#endif
diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h
new file mode 100644
index 00000000..5120b01c
--- /dev/null
+++ b/include/drm/drm_fb_helper.h
@@ -0,0 +1,120 @@
+/*
+ * Copyright (c) 2006-2009 Red Hat Inc.
+ * Copyright (c) 2006-2008 Intel Corporation
+ * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
+ *
+ * DRM framebuffer helper functions
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  The copyright holders make no representations
+ * about the suitability of this software for any purpose.  It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ *
+ * Authors:
+ *      Dave Airlie <airlied@linux.ie>
+ *      Jesse Barnes <jesse.barnes@intel.com>
+ */
+#ifndef DRM_FB_HELPER_H
+#define DRM_FB_HELPER_H
+
+struct drm_fb_helper;
+
+#include <linux/kgdb.h>
+
+struct drm_fb_helper_crtc {
+	struct drm_mode_set mode_set;
+	struct drm_display_mode *desired_mode;
+};
+
+struct drm_fb_helper_surface_size {
+	u32 fb_width;
+	u32 fb_height;
+	u32 surface_width;
+	u32 surface_height;
+	u32 surface_bpp;
+	u32 surface_depth;
+};
+
+struct drm_fb_helper_funcs {
+	void (*gamma_set)(struct drm_crtc *crtc, u16 red, u16 green,
+			  u16 blue, int regno);
+	void (*gamma_get)(struct drm_crtc *crtc, u16 *red, u16 *green,
+			  u16 *blue, int regno);
+
+	int (*fb_probe)(struct drm_fb_helper *helper,
+			struct drm_fb_helper_surface_size *sizes);
+};
+
+struct drm_fb_helper_connector {
+	struct drm_connector *connector;
+	struct drm_cmdline_mode cmdline_mode;
+};
+
+struct drm_fb_helper {
+	struct drm_framebuffer *fb;
+	struct drm_framebuffer *saved_fb;
+	struct drm_device *dev;
+	struct drm_display_mode *mode;
+	int crtc_count;
+	struct drm_fb_helper_crtc *crtc_info;
+	int connector_count;
+	struct drm_fb_helper_connector **connector_info;
+	struct drm_fb_helper_funcs *funcs;
+	struct fb_info *fbdev;
+	u32 pseudo_palette[17];
+	struct list_head kernel_fb_list;
+
+	/* we got a hotplug but fbdev wasn't running the console
+	   delay until next set_par */
+	bool delayed_hotplug;
+};
+
+int drm_fb_helper_single_fb_probe(struct drm_fb_helper *helper,
+				  int preferred_bpp);
+
+int drm_fb_helper_init(struct drm_device *dev,
+		       struct drm_fb_helper *helper, int crtc_count,
+		       int max_conn);
+void drm_fb_helper_fini(struct drm_fb_helper *helper);
+int drm_fb_helper_blank(int blank, struct fb_info *info);
+int drm_fb_helper_pan_display(struct fb_var_screeninfo *var,
+			      struct fb_info *info);
+int drm_fb_helper_set_par(struct fb_info *info);
+int drm_fb_helper_check_var(struct fb_var_screeninfo *var,
+			    struct fb_info *info);
+int drm_fb_helper_setcolreg(unsigned regno,
+			    unsigned red,
+			    unsigned green,
+			    unsigned blue,
+			    unsigned transp,
+			    struct fb_info *info);
+
+bool drm_fb_helper_restore_fbdev_mode(struct drm_fb_helper *fb_helper);
+void drm_fb_helper_restore(void);
+void drm_fb_helper_fill_var(struct fb_info *info, struct drm_fb_helper *fb_helper,
+			    uint32_t fb_width, uint32_t fb_height);
+void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch,
+			    uint32_t depth);
+
+int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info);
+
+int drm_fb_helper_hotplug_event(struct drm_fb_helper *fb_helper);
+bool drm_fb_helper_initial_config(struct drm_fb_helper *fb_helper, int bpp_sel);
+int drm_fb_helper_single_add_all_connectors(struct drm_fb_helper *fb_helper);
+int drm_fb_helper_debug_enter(struct fb_info *info);
+int drm_fb_helper_debug_leave(struct fb_info *info);
+
+#endif
diff --git a/include/drm/drm_fixed.h b/include/drm/drm_fixed.h
new file mode 100644
index 00000000..4a08a664
--- /dev/null
+++ b/include/drm/drm_fixed.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2009 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ */
+#ifndef DRM_FIXED_H
+#define DRM_FIXED_H
+
+typedef union dfixed {
+	u32 full;
+} fixed20_12;
+
+
+#define dfixed_const(A) (u32)(((A) << 12))/*  + ((B + 0.000122)*4096)) */
+#define dfixed_const_half(A) (u32)(((A) << 12) + 2048)
+#define dfixed_const_666(A) (u32)(((A) << 12) + 2731)
+#define dfixed_const_8(A) (u32)(((A) << 12) + 3277)
+#define dfixed_mul(A, B) ((u64)((u64)(A).full * (B).full + 2048) >> 12)
+#define dfixed_init(A) { .full = dfixed_const((A)) }
+#define dfixed_init_half(A) { .full = dfixed_const_half((A)) }
+#define dfixed_trunc(A) ((A).full >> 12)
+
+static inline u32 dfixed_floor(fixed20_12 A)
+{
+	u32 non_frac = dfixed_trunc(A);
+
+	return dfixed_const(non_frac);
+}
+
+static inline u32 dfixed_ceil(fixed20_12 A)
+{
+	u32 non_frac = dfixed_trunc(A);
+
+	if (A.full > dfixed_const(non_frac))
+		return dfixed_const(non_frac + 1);
+	else
+		return dfixed_const(non_frac);
+}
+
+static inline u32 dfixed_div(fixed20_12 A, fixed20_12 B)
+{
+	u64 tmp = ((u64)A.full << 13);
+
+	do_div(tmp, B.full);
+	tmp += 1;
+	tmp /= 2;
+	return lower_32_bits(tmp);
+}
+#endif
diff --git a/include/drm/drm_fourcc.h b/include/drm/drm_fourcc.h
new file mode 100644
index 00000000..bdf0152c
--- /dev/null
+++ b/include/drm/drm_fourcc.h
@@ -0,0 +1,137 @@
+/*
+ * Copyright 2011 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef DRM_FOURCC_H
+#define DRM_FOURCC_H
+
+#include <linux/types.h>
+
+#define fourcc_code(a, b, c, d) ((__u32)(a) | ((__u32)(b) << 8) | \
+				 ((__u32)(c) << 16) | ((__u32)(d) << 24))
+
+#define DRM_FORMAT_BIG_ENDIAN (1<<31) /* format is big endian instead of little endian */
+
+/* color index */
+#define DRM_FORMAT_C8		fourcc_code('C', '8', ' ', ' ') /* [7:0] C */
+
+/* 8 bpp RGB */
+#define DRM_FORMAT_RGB332	fourcc_code('R', 'G', 'B', '8') /* [7:0] R:G:B 3:3:2 */
+#define DRM_FORMAT_BGR233	fourcc_code('B', 'G', 'R', '8') /* [7:0] B:G:R 2:3:3 */
+
+/* 16 bpp RGB */
+#define DRM_FORMAT_XRGB4444	fourcc_code('X', 'R', '1', '2') /* [15:0] x:R:G:B 4:4:4:4 little endian */
+#define DRM_FORMAT_XBGR4444	fourcc_code('X', 'B', '1', '2') /* [15:0] x:B:G:R 4:4:4:4 little endian */
+#define DRM_FORMAT_RGBX4444	fourcc_code('R', 'X', '1', '2') /* [15:0] R:G:B:x 4:4:4:4 little endian */
+#define DRM_FORMAT_BGRX4444	fourcc_code('B', 'X', '1', '2') /* [15:0] B:G:R:x 4:4:4:4 little endian */
+
+#define DRM_FORMAT_ARGB4444	fourcc_code('A', 'R', '1', '2') /* [15:0] A:R:G:B 4:4:4:4 little endian */
+#define DRM_FORMAT_ABGR4444	fourcc_code('A', 'B', '1', '2') /* [15:0] A:B:G:R 4:4:4:4 little endian */
+#define DRM_FORMAT_RGBA4444	fourcc_code('R', 'A', '1', '2') /* [15:0] R:G:B:A 4:4:4:4 little endian */
+#define DRM_FORMAT_BGRA4444	fourcc_code('B', 'A', '1', '2') /* [15:0] B:G:R:A 4:4:4:4 little endian */
+
+#define DRM_FORMAT_XRGB1555	fourcc_code('X', 'R', '1', '5') /* [15:0] x:R:G:B 1:5:5:5 little endian */
+#define DRM_FORMAT_XBGR1555	fourcc_code('X', 'B', '1', '5') /* [15:0] x:B:G:R 1:5:5:5 little endian */
+#define DRM_FORMAT_RGBX5551	fourcc_code('R', 'X', '1', '5') /* [15:0] R:G:B:x 5:5:5:1 little endian */
+#define DRM_FORMAT_BGRX5551	fourcc_code('B', 'X', '1', '5') /* [15:0] B:G:R:x 5:5:5:1 little endian */
+
+#define DRM_FORMAT_ARGB1555	fourcc_code('A', 'R', '1', '5') /* [15:0] A:R:G:B 1:5:5:5 little endian */
+#define DRM_FORMAT_ABGR1555	fourcc_code('A', 'B', '1', '5') /* [15:0] A:B:G:R 1:5:5:5 little endian */
+#define DRM_FORMAT_RGBA5551	fourcc_code('R', 'A', '1', '5') /* [15:0] R:G:B:A 5:5:5:1 little endian */
+#define DRM_FORMAT_BGRA5551	fourcc_code('B', 'A', '1', '5') /* [15:0] B:G:R:A 5:5:5:1 little endian */
+
+#define DRM_FORMAT_RGB565	fourcc_code('R', 'G', '1', '6') /* [15:0] R:G:B 5:6:5 little endian */
+#define DRM_FORMAT_BGR565	fourcc_code('B', 'G', '1', '6') /* [15:0] B:G:R 5:6:5 little endian */
+
+/* 24 bpp RGB */
+#define DRM_FORMAT_RGB888	fourcc_code('R', 'G', '2', '4') /* [23:0] R:G:B little endian */
+#define DRM_FORMAT_BGR888	fourcc_code('B', 'G', '2', '4') /* [23:0] B:G:R little endian */
+
+/* 32 bpp RGB */
+#define DRM_FORMAT_XRGB8888	fourcc_code('X', 'R', '2', '4') /* [31:0] x:R:G:B 8:8:8:8 little endian */
+#define DRM_FORMAT_XBGR8888	fourcc_code('X', 'B', '2', '4') /* [31:0] x:B:G:R 8:8:8:8 little endian */
+#define DRM_FORMAT_RGBX8888	fourcc_code('R', 'X', '2', '4') /* [31:0] R:G:B:x 8:8:8:8 little endian */
+#define DRM_FORMAT_BGRX8888	fourcc_code('B', 'X', '2', '4') /* [31:0] B:G:R:x 8:8:8:8 little endian */
+
+#define DRM_FORMAT_ARGB8888	fourcc_code('A', 'R', '2', '4') /* [31:0] A:R:G:B 8:8:8:8 little endian */
+#define DRM_FORMAT_ABGR8888	fourcc_code('A', 'B', '2', '4') /* [31:0] A:B:G:R 8:8:8:8 little endian */
+#define DRM_FORMAT_RGBA8888	fourcc_code('R', 'A', '2', '4') /* [31:0] R:G:B:A 8:8:8:8 little endian */
+#define DRM_FORMAT_BGRA8888	fourcc_code('B', 'A', '2', '4') /* [31:0] B:G:R:A 8:8:8:8 little endian */
+
+#define DRM_FORMAT_XRGB2101010	fourcc_code('X', 'R', '3', '0') /* [31:0] x:R:G:B 2:10:10:10 little endian */
+#define DRM_FORMAT_XBGR2101010	fourcc_code('X', 'B', '3', '0') /* [31:0] x:B:G:R 2:10:10:10 little endian */
+#define DRM_FORMAT_RGBX1010102	fourcc_code('R', 'X', '3', '0') /* [31:0] R:G:B:x 10:10:10:2 little endian */
+#define DRM_FORMAT_BGRX1010102	fourcc_code('B', 'X', '3', '0') /* [31:0] B:G:R:x 10:10:10:2 little endian */
+
+#define DRM_FORMAT_ARGB2101010	fourcc_code('A', 'R', '3', '0') /* [31:0] A:R:G:B 2:10:10:10 little endian */
+#define DRM_FORMAT_ABGR2101010	fourcc_code('A', 'B', '3', '0') /* [31:0] A:B:G:R 2:10:10:10 little endian */
+#define DRM_FORMAT_RGBA1010102	fourcc_code('R', 'A', '3', '0') /* [31:0] R:G:B:A 10:10:10:2 little endian */
+#define DRM_FORMAT_BGRA1010102	fourcc_code('B', 'A', '3', '0') /* [31:0] B:G:R:A 10:10:10:2 little endian */
+
+/* packed YCbCr */
+#define DRM_FORMAT_YUYV		fourcc_code('Y', 'U', 'Y', 'V') /* [31:0] Cr0:Y1:Cb0:Y0 8:8:8:8 little endian */
+#define DRM_FORMAT_YVYU		fourcc_code('Y', 'V', 'Y', 'U') /* [31:0] Cb0:Y1:Cr0:Y0 8:8:8:8 little endian */
+#define DRM_FORMAT_UYVY		fourcc_code('U', 'Y', 'V', 'Y') /* [31:0] Y1:Cr0:Y0:Cb0 8:8:8:8 little endian */
+#define DRM_FORMAT_VYUY		fourcc_code('V', 'Y', 'U', 'Y') /* [31:0] Y1:Cb0:Y0:Cr0 8:8:8:8 little endian */
+
+#define DRM_FORMAT_AYUV		fourcc_code('A', 'Y', 'U', 'V') /* [31:0] A:Y:Cb:Cr 8:8:8:8 little endian */
+
+/*
+ * 2 plane YCbCr
+ * index 0 = Y plane, [7:0] Y
+ * index 1 = Cr:Cb plane, [15:0] Cr:Cb little endian
+ * or
+ * index 1 = Cb:Cr plane, [15:0] Cb:Cr little endian
+ */
+#define DRM_FORMAT_NV12		fourcc_code('N', 'V', '1', '2') /* 2x2 subsampled Cr:Cb plane */
+#define DRM_FORMAT_NV21		fourcc_code('N', 'V', '2', '1') /* 2x2 subsampled Cb:Cr plane */
+#define DRM_FORMAT_NV16		fourcc_code('N', 'V', '1', '6') /* 2x1 subsampled Cr:Cb plane */
+#define DRM_FORMAT_NV61		fourcc_code('N', 'V', '6', '1') /* 2x1 subsampled Cb:Cr plane */
+
+/* 2 non contiguous plane YCbCr */
+#define DRM_FORMAT_NV12M	fourcc_code('N', 'M', '1', '2') /* 2x2 subsampled Cr:Cb plane */
+#define DRM_FORMAT_NV12MT	fourcc_code('T', 'M', '1', '2') /* 2x2 subsampled Cr:Cb plane 64x32 macroblocks */
+
+/*
+ * 3 plane YCbCr
+ * index 0: Y plane, [7:0] Y
+ * index 1: Cb plane, [7:0] Cb
+ * index 2: Cr plane, [7:0] Cr
+ * or
+ * index 1: Cr plane, [7:0] Cr
+ * index 2: Cb plane, [7:0] Cb
+ */
+#define DRM_FORMAT_YUV410	fourcc_code('Y', 'U', 'V', '9') /* 4x4 subsampled Cb (1) and Cr (2) planes */
+#define DRM_FORMAT_YVU410	fourcc_code('Y', 'V', 'U', '9') /* 4x4 subsampled Cr (1) and Cb (2) planes */
+#define DRM_FORMAT_YUV411	fourcc_code('Y', 'U', '1', '1') /* 4x1 subsampled Cb (1) and Cr (2) planes */
+#define DRM_FORMAT_YVU411	fourcc_code('Y', 'V', '1', '1') /* 4x1 subsampled Cr (1) and Cb (2) planes */
+#define DRM_FORMAT_YUV420	fourcc_code('Y', 'U', '1', '2') /* 2x2 subsampled Cb (1) and Cr (2) planes */
+#define DRM_FORMAT_YVU420	fourcc_code('Y', 'V', '1', '2') /* 2x2 subsampled Cr (1) and Cb (2) planes */
+#define DRM_FORMAT_YUV422	fourcc_code('Y', 'U', '1', '6') /* 2x1 subsampled Cb (1) and Cr (2) planes */
+#define DRM_FORMAT_YVU422	fourcc_code('Y', 'V', '1', '6') /* 2x1 subsampled Cr (1) and Cb (2) planes */
+#define DRM_FORMAT_YUV444	fourcc_code('Y', 'U', '2', '4') /* non-subsampled Cb (1) and Cr (2) planes */
+#define DRM_FORMAT_YVU444	fourcc_code('Y', 'V', '2', '4') /* non-subsampled Cr (1) and Cb (2) planes */
+
+/* 3 non contiguous plane YCbCr */
+#define DRM_FORMAT_YUV420M	fourcc_code('Y', 'M', '1', '2') /* 2x2 subsampled Cb (1) and Cr (2) planes */
+
+#endif /* DRM_FOURCC_H */
diff --git a/include/drm/drm_global.h b/include/drm/drm_global.h
new file mode 100644
index 00000000..a06805ea
--- /dev/null
+++ b/include/drm/drm_global.h
@@ -0,0 +1,53 @@
+/**************************************************************************
+ *
+ * Copyright 2008-2009 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+/*
+ * Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
+ */
+
+#ifndef _DRM_GLOBAL_H_
+#define _DRM_GLOBAL_H_
+enum drm_global_types {
+	DRM_GLOBAL_TTM_MEM = 0,
+	DRM_GLOBAL_TTM_BO,
+	DRM_GLOBAL_TTM_OBJECT,
+	DRM_GLOBAL_NUM
+};
+
+struct drm_global_reference {
+	enum drm_global_types global_type;
+	size_t size;
+	void *object;
+	int (*init) (struct drm_global_reference *);
+	void (*release) (struct drm_global_reference *);
+};
+
+extern void drm_global_init(void);
+extern void drm_global_release(void);
+extern int drm_global_item_ref(struct drm_global_reference *ref);
+extern void drm_global_item_unref(struct drm_global_reference *ref);
+
+#endif
diff --git a/include/drm/drm_hashtab.h b/include/drm/drm_hashtab.h
new file mode 100644
index 00000000..3650d5d0
--- /dev/null
+++ b/include/drm/drm_hashtab.h
@@ -0,0 +1,65 @@
+/**************************************************************************
+ *
+ * Copyright 2006 Tungsten Graphics, Inc., Bismack, ND. USA.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ *
+ **************************************************************************/
+/*
+ * Simple open hash tab implementation.
+ *
+ * Authors:
+ * Thomas Hellström <thomas-at-tungstengraphics-dot-com>
+ */
+
+#ifndef DRM_HASHTAB_H
+#define DRM_HASHTAB_H
+
+#include <linux/list.h>
+
+#define drm_hash_entry(_ptr, _type, _member) container_of(_ptr, _type, _member)
+
+struct drm_hash_item {
+	struct hlist_node head;
+	unsigned long key;
+};
+
+struct drm_open_hash {
+	struct hlist_head *table;
+	u8 order;
+};
+
+extern int drm_ht_create(struct drm_open_hash *ht, unsigned int order);
+extern int drm_ht_insert_item(struct drm_open_hash *ht, struct drm_hash_item *item);
+extern int drm_ht_just_insert_please(struct drm_open_hash *ht, struct drm_hash_item *item,
+				     unsigned long seed, int bits, int shift,
+				     unsigned long add);
+extern int drm_ht_find_item(struct drm_open_hash *ht, unsigned long key, struct drm_hash_item **item);
+
+extern void drm_ht_verbose_list(struct drm_open_hash *ht, unsigned long key);
+extern int drm_ht_remove_key(struct drm_open_hash *ht, unsigned long key);
+extern int drm_ht_remove_item(struct drm_open_hash *ht, struct drm_hash_item *item);
+extern void drm_ht_remove(struct drm_open_hash *ht);
+
+
+#endif
diff --git a/include/drm/drm_mem_util.h b/include/drm/drm_mem_util.h
new file mode 100644
index 00000000..6bd325fe
--- /dev/null
+++ b/include/drm/drm_mem_util.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright © 2008 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *     Jesse Barnes <jbarnes@virtuousgeek.org>
+ *
+ */
+#ifndef _DRM_MEM_UTIL_H_
+#define _DRM_MEM_UTIL_H_
+
+#include <linux/vmalloc.h>
+
+static __inline__ void *drm_calloc_large(size_t nmemb, size_t size)
+{
+	if (size != 0 && nmemb > ULONG_MAX / size)
+		return NULL;
+
+	if (size * nmemb <= PAGE_SIZE)
+	    return kcalloc(nmemb, size, GFP_KERNEL);
+
+	return __vmalloc(size * nmemb,
+			 GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO, PAGE_KERNEL);
+}
+
+/* Modeled after cairo's malloc_ab, it's like calloc but without the zeroing. */
+static __inline__ void *drm_malloc_ab(size_t nmemb, size_t size)
+{
+	if (size != 0 && nmemb > ULONG_MAX / size)
+		return NULL;
+
+	if (size * nmemb <= PAGE_SIZE)
+	    return kmalloc(nmemb * size, GFP_KERNEL);
+
+	return __vmalloc(size * nmemb,
+			 GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL);
+}
+
+static __inline void drm_free_large(void *ptr)
+{
+	if (!is_vmalloc_addr(ptr))
+		return kfree(ptr);
+
+	vfree(ptr);
+}
+
+#endif
diff --git a/include/drm/drm_memory.h b/include/drm/drm_memory.h
new file mode 100644
index 00000000..15af9b32
--- /dev/null
+++ b/include/drm/drm_memory.h
@@ -0,0 +1,59 @@
+/**
+ * \file drm_memory.h
+ * Memory management wrappers for DRM
+ *
+ * \author Rickard E. (Rik) Faith <faith@valinux.com>
+ * \author Gareth Hughes <gareth@valinux.com>
+ */
+
+/*
+ * Created: Thu Feb  4 14:00:34 1999 by faith@valinux.com
+ *
+ * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas.
+ * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <linux/highmem.h>
+#include <linux/vmalloc.h>
+#include "drmP.h"
+
+/**
+ * Cut down version of drm_memory_debug.h, which used to be called
+ * drm_memory.h.
+ */
+
+#if __OS_HAS_AGP
+
+#ifdef HAVE_PAGE_AGP
+#include <asm/agp.h>
+#else
+# ifdef __powerpc__
+#  define PAGE_AGP	__pgprot(_PAGE_KERNEL | _PAGE_NO_CACHE)
+# else
+#  define PAGE_AGP	PAGE_KERNEL
+# endif
+#endif
+
+#else				/* __OS_HAS_AGP */
+
+#endif
diff --git a/include/drm/drm_mm.h b/include/drm/drm_mm.h
new file mode 100644
index 00000000..564b14aa
--- /dev/null
+++ b/include/drm/drm_mm.h
@@ -0,0 +1,188 @@
+/**************************************************************************
+ *
+ * Copyright 2006-2008 Tungsten Graphics, Inc., Cedar Park, TX. USA.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ *
+ **************************************************************************/
+/*
+ * Authors:
+ * Thomas Hellstrom <thomas-at-tungstengraphics-dot-com>
+ */
+
+#ifndef _DRM_MM_H_
+#define _DRM_MM_H_
+
+/*
+ * Generic range manager structs
+ */
+#include <linux/list.h>
+#ifdef CONFIG_DEBUG_FS
+#include <linux/seq_file.h>
+#endif
+
+struct drm_mm_node {
+	struct list_head node_list;
+	struct list_head hole_stack;
+	unsigned hole_follows : 1;
+	unsigned scanned_block : 1;
+	unsigned scanned_prev_free : 1;
+	unsigned scanned_next_free : 1;
+	unsigned scanned_preceeds_hole : 1;
+	unsigned allocated : 1;
+	unsigned long start;
+	unsigned long size;
+	struct drm_mm *mm;
+};
+
+struct drm_mm {
+	/* List of all memory nodes that immediately precede a free hole. */
+	struct list_head hole_stack;
+	/* head_node.node_list is the list of all memory nodes, ordered
+	 * according to the (increasing) start address of the memory node. */
+	struct drm_mm_node head_node;
+	struct list_head unused_nodes;
+	int num_unused;
+	spinlock_t unused_lock;
+	unsigned int scan_check_range : 1;
+	unsigned scan_alignment;
+	unsigned long scan_size;
+	unsigned long scan_hit_start;
+	unsigned scan_hit_size;
+	unsigned scanned_blocks;
+	unsigned long scan_start;
+	unsigned long scan_end;
+	struct drm_mm_node *prev_scanned_node;
+};
+
+static inline bool drm_mm_node_allocated(struct drm_mm_node *node)
+{
+	return node->allocated;
+}
+
+static inline bool drm_mm_initialized(struct drm_mm *mm)
+{
+	return mm->hole_stack.next;
+}
+#define drm_mm_for_each_node(entry, mm) list_for_each_entry(entry, \
+						&(mm)->head_node.node_list, \
+						node_list)
+#define drm_mm_for_each_scanned_node_reverse(entry, n, mm) \
+	for (entry = (mm)->prev_scanned_node, \
+		next = entry ? list_entry(entry->node_list.next, \
+			struct drm_mm_node, node_list) : NULL; \
+	     entry != NULL; entry = next, \
+		next = entry ? list_entry(entry->node_list.next, \
+			struct drm_mm_node, node_list) : NULL) \
+/*
+ * Basic range manager support (drm_mm.c)
+ */
+extern struct drm_mm_node *drm_mm_get_block_generic(struct drm_mm_node *node,
+						    unsigned long size,
+						    unsigned alignment,
+						    int atomic);
+extern struct drm_mm_node *drm_mm_get_block_range_generic(
+						struct drm_mm_node *node,
+						unsigned long size,
+						unsigned alignment,
+						unsigned long start,
+						unsigned long end,
+						int atomic);
+static inline struct drm_mm_node *drm_mm_get_block(struct drm_mm_node *parent,
+						   unsigned long size,
+						   unsigned alignment)
+{
+	return drm_mm_get_block_generic(parent, size, alignment, 0);
+}
+static inline struct drm_mm_node *drm_mm_get_block_atomic(struct drm_mm_node *parent,
+							  unsigned long size,
+							  unsigned alignment)
+{
+	return drm_mm_get_block_generic(parent, size, alignment, 1);
+}
+static inline struct drm_mm_node *drm_mm_get_block_range(
+						struct drm_mm_node *parent,
+						unsigned long size,
+						unsigned alignment,
+						unsigned long start,
+						unsigned long end)
+{
+	return drm_mm_get_block_range_generic(parent, size, alignment,
+						start, end, 0);
+}
+static inline struct drm_mm_node *drm_mm_get_block_atomic_range(
+						struct drm_mm_node *parent,
+						unsigned long size,
+						unsigned alignment,
+						unsigned long start,
+						unsigned long end)
+{
+	return drm_mm_get_block_range_generic(parent, size, alignment,
+						start, end, 1);
+}
+extern int drm_mm_insert_node(struct drm_mm *mm, struct drm_mm_node *node,
+			      unsigned long size, unsigned alignment);
+extern int drm_mm_insert_node_in_range(struct drm_mm *mm,
+				       struct drm_mm_node *node,
+				       unsigned long size, unsigned alignment,
+				       unsigned long start, unsigned long end);
+extern void drm_mm_put_block(struct drm_mm_node *cur);
+extern void drm_mm_remove_node(struct drm_mm_node *node);
+extern void drm_mm_replace_node(struct drm_mm_node *old, struct drm_mm_node *new);
+extern struct drm_mm_node *drm_mm_search_free(const struct drm_mm *mm,
+					      unsigned long size,
+					      unsigned alignment,
+					      int best_match);
+extern struct drm_mm_node *drm_mm_search_free_in_range(
+						const struct drm_mm *mm,
+						unsigned long size,
+						unsigned alignment,
+						unsigned long start,
+						unsigned long end,
+						int best_match);
+extern int drm_mm_init(struct drm_mm *mm, unsigned long start,
+		       unsigned long size);
+extern void drm_mm_takedown(struct drm_mm *mm);
+extern int drm_mm_clean(struct drm_mm *mm);
+extern int drm_mm_pre_get(struct drm_mm *mm);
+
+static inline struct drm_mm *drm_get_mm(struct drm_mm_node *block)
+{
+	return block->mm;
+}
+
+void drm_mm_init_scan(struct drm_mm *mm, unsigned long size,
+		      unsigned alignment);
+void drm_mm_init_scan_with_range(struct drm_mm *mm, unsigned long size,
+				 unsigned alignment,
+				 unsigned long start,
+				 unsigned long end);
+int drm_mm_scan_add_block(struct drm_mm_node *node);
+int drm_mm_scan_remove_block(struct drm_mm_node *node);
+
+extern void drm_mm_debug_table(struct drm_mm *mm, const char *prefix);
+#ifdef CONFIG_DEBUG_FS
+int drm_mm_dump_table(struct seq_file *m, struct drm_mm *mm);
+#endif
+
+#endif
diff --git a/include/drm/drm_mode.h b/include/drm/drm_mode.h
new file mode 100644
index 00000000..4a0aae38
--- /dev/null
+++ b/include/drm/drm_mode.h
@@ -0,0 +1,446 @@
+/*
+ * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
+ * Copyright (c) 2007 Jakob Bornecrantz <wallbraker@gmail.com>
+ * Copyright (c) 2008 Red Hat Inc.
+ * Copyright (c) 2007-2008 Tungsten Graphics, Inc., Cedar Park, TX., USA
+ * Copyright (c) 2007-2008 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef _DRM_MODE_H
+#define _DRM_MODE_H
+
+#include <linux/types.h>
+
+#define DRM_DISPLAY_INFO_LEN	32
+#define DRM_CONNECTOR_NAME_LEN	32
+#define DRM_DISPLAY_MODE_LEN	32
+#define DRM_PROP_NAME_LEN	32
+
+#define DRM_MODE_TYPE_BUILTIN	(1<<0)
+#define DRM_MODE_TYPE_CLOCK_C	((1<<1) | DRM_MODE_TYPE_BUILTIN)
+#define DRM_MODE_TYPE_CRTC_C	((1<<2) | DRM_MODE_TYPE_BUILTIN)
+#define DRM_MODE_TYPE_PREFERRED	(1<<3)
+#define DRM_MODE_TYPE_DEFAULT	(1<<4)
+#define DRM_MODE_TYPE_USERDEF	(1<<5)
+#define DRM_MODE_TYPE_DRIVER	(1<<6)
+
+/* Video mode flags */
+/* bit compatible with the xorg definitions. */
+#define DRM_MODE_FLAG_PHSYNC	(1<<0)
+#define DRM_MODE_FLAG_NHSYNC	(1<<1)
+#define DRM_MODE_FLAG_PVSYNC	(1<<2)
+#define DRM_MODE_FLAG_NVSYNC	(1<<3)
+#define DRM_MODE_FLAG_INTERLACE	(1<<4)
+#define DRM_MODE_FLAG_DBLSCAN	(1<<5)
+#define DRM_MODE_FLAG_CSYNC	(1<<6)
+#define DRM_MODE_FLAG_PCSYNC	(1<<7)
+#define DRM_MODE_FLAG_NCSYNC	(1<<8)
+#define DRM_MODE_FLAG_HSKEW	(1<<9) /* hskew provided */
+#define DRM_MODE_FLAG_BCAST	(1<<10)
+#define DRM_MODE_FLAG_PIXMUX	(1<<11)
+#define DRM_MODE_FLAG_DBLCLK	(1<<12)
+#define DRM_MODE_FLAG_CLKDIV2	(1<<13)
+
+/* DPMS flags */
+/* bit compatible with the xorg definitions. */
+#define DRM_MODE_DPMS_ON	0
+#define DRM_MODE_DPMS_STANDBY	1
+#define DRM_MODE_DPMS_SUSPEND	2
+#define DRM_MODE_DPMS_OFF	3
+
+/* Scaling mode options */
+#define DRM_MODE_SCALE_NONE		0 /* Unmodified timing (display or
+					     software can still scale) */
+#define DRM_MODE_SCALE_FULLSCREEN	1 /* Full screen, ignore aspect */
+#define DRM_MODE_SCALE_CENTER		2 /* Centered, no scaling */
+#define DRM_MODE_SCALE_ASPECT		3 /* Full screen, preserve aspect */
+
+/* Dithering mode options */
+#define DRM_MODE_DITHERING_OFF	0
+#define DRM_MODE_DITHERING_ON	1
+#define DRM_MODE_DITHERING_AUTO 2
+
+/* Dirty info options */
+#define DRM_MODE_DIRTY_OFF      0
+#define DRM_MODE_DIRTY_ON       1
+#define DRM_MODE_DIRTY_ANNOTATE 2
+
+struct drm_mode_modeinfo {
+	__u32 clock;
+	__u16 hdisplay, hsync_start, hsync_end, htotal, hskew;
+	__u16 vdisplay, vsync_start, vsync_end, vtotal, vscan;
+
+	__u32 vrefresh;
+
+	__u32 flags;
+	__u32 type;
+	char name[DRM_DISPLAY_MODE_LEN];
+};
+
+struct drm_mode_card_res {
+	__u64 fb_id_ptr;
+	__u64 crtc_id_ptr;
+	__u64 connector_id_ptr;
+	__u64 encoder_id_ptr;
+	__u32 count_fbs;
+	__u32 count_crtcs;
+	__u32 count_connectors;
+	__u32 count_encoders;
+	__u32 min_width, max_width;
+	__u32 min_height, max_height;
+};
+
+struct drm_mode_crtc {
+	__u64 set_connectors_ptr;
+	__u32 count_connectors;
+
+	__u32 crtc_id; /**< Id */
+	__u32 fb_id; /**< Id of framebuffer */
+
+	__u32 x, y; /**< Position on the frameuffer */
+
+	__u32 gamma_size;
+	__u32 mode_valid;
+	struct drm_mode_modeinfo mode;
+};
+
+#define DRM_MODE_PRESENT_TOP_FIELD	(1<<0)
+#define DRM_MODE_PRESENT_BOTTOM_FIELD	(1<<1)
+
+/* Planes blend with or override other bits on the CRTC */
+struct drm_mode_set_plane {
+	__u32 plane_id;
+	__u32 crtc_id;
+	__u32 fb_id; /* fb object contains surface format type */
+	__u32 flags; /* see above flags */
+
+	/* Signed dest location allows it to be partially off screen */
+	__s32 crtc_x, crtc_y;
+	__u32 crtc_w, crtc_h;
+
+	/* Source values are 16.16 fixed point */
+	__u32 src_x, src_y;
+	__u32 src_h, src_w;
+};
+
+struct drm_mode_get_plane {
+	__u32 plane_id;
+
+	__u32 crtc_id;
+	__u32 fb_id;
+
+	__u32 possible_crtcs;
+	__u32 gamma_size;
+
+	__u32 count_format_types;
+	__u64 format_type_ptr;
+};
+
+struct drm_mode_get_plane_res {
+	__u64 plane_id_ptr;
+	__u32 count_planes;
+};
+
+#define DRM_MODE_ENCODER_NONE	0
+#define DRM_MODE_ENCODER_DAC	1
+#define DRM_MODE_ENCODER_TMDS	2
+#define DRM_MODE_ENCODER_LVDS	3
+#define DRM_MODE_ENCODER_TVDAC	4
+#define DRM_MODE_ENCODER_VIRTUAL 5
+
+struct drm_mode_get_encoder {
+	__u32 encoder_id;
+	__u32 encoder_type;
+
+	__u32 crtc_id; /**< Id of crtc */
+
+	__u32 possible_crtcs;
+	__u32 possible_clones;
+};
+
+/* This is for connectors with multiple signal types. */
+/* Try to match DRM_MODE_CONNECTOR_X as closely as possible. */
+#define DRM_MODE_SUBCONNECTOR_Automatic	0
+#define DRM_MODE_SUBCONNECTOR_Unknown	0
+#define DRM_MODE_SUBCONNECTOR_DVID	3
+#define DRM_MODE_SUBCONNECTOR_DVIA	4
+#define DRM_MODE_SUBCONNECTOR_Composite	5
+#define DRM_MODE_SUBCONNECTOR_SVIDEO	6
+#define DRM_MODE_SUBCONNECTOR_Component	8
+#define DRM_MODE_SUBCONNECTOR_SCART	9
+
+#define DRM_MODE_CONNECTOR_Unknown	0
+#define DRM_MODE_CONNECTOR_VGA		1
+#define DRM_MODE_CONNECTOR_DVII		2
+#define DRM_MODE_CONNECTOR_DVID		3
+#define DRM_MODE_CONNECTOR_DVIA		4
+#define DRM_MODE_CONNECTOR_Composite	5
+#define DRM_MODE_CONNECTOR_SVIDEO	6
+#define DRM_MODE_CONNECTOR_LVDS		7
+#define DRM_MODE_CONNECTOR_Component	8
+#define DRM_MODE_CONNECTOR_9PinDIN	9
+#define DRM_MODE_CONNECTOR_DisplayPort	10
+#define DRM_MODE_CONNECTOR_HDMIA	11
+#define DRM_MODE_CONNECTOR_HDMIB	12
+#define DRM_MODE_CONNECTOR_TV		13
+#define DRM_MODE_CONNECTOR_eDP		14
+#define DRM_MODE_CONNECTOR_VIRTUAL      15
+
+struct drm_mode_get_connector {
+
+	__u64 encoders_ptr;
+	__u64 modes_ptr;
+	__u64 props_ptr;
+	__u64 prop_values_ptr;
+
+	__u32 count_modes;
+	__u32 count_props;
+	__u32 count_encoders;
+
+	__u32 encoder_id; /**< Current Encoder */
+	__u32 connector_id; /**< Id */
+	__u32 connector_type;
+	__u32 connector_type_id;
+
+	__u32 connection;
+	__u32 mm_width, mm_height; /**< HxW in millimeters */
+	__u32 subpixel;
+};
+
+#define DRM_MODE_PROP_PENDING	(1<<0)
+#define DRM_MODE_PROP_RANGE	(1<<1)
+#define DRM_MODE_PROP_IMMUTABLE	(1<<2)
+#define DRM_MODE_PROP_ENUM	(1<<3) /* enumerated type with text strings */
+#define DRM_MODE_PROP_BLOB	(1<<4)
+
+struct drm_mode_property_enum {
+	__u64 value;
+	char name[DRM_PROP_NAME_LEN];
+};
+
+struct drm_mode_get_property {
+	__u64 values_ptr; /* values and blob lengths */
+	__u64 enum_blob_ptr; /* enum and blob id ptrs */
+
+	__u32 prop_id;
+	__u32 flags;
+	char name[DRM_PROP_NAME_LEN];
+
+	__u32 count_values;
+	__u32 count_enum_blobs;
+};
+
+struct drm_mode_connector_set_property {
+	__u64 value;
+	__u32 prop_id;
+	__u32 connector_id;
+};
+
+struct drm_mode_get_blob {
+	__u32 blob_id;
+	__u32 length;
+	__u64 data;
+};
+
+struct drm_mode_fb_cmd {
+	__u32 fb_id;
+	__u32 width, height;
+	__u32 pitch;
+	__u32 bpp;
+	__u32 depth;
+	/* driver specific handle */
+	__u32 handle;
+};
+
+#define DRM_MODE_FB_INTERLACED	(1<<0) /* for interlaced framebuffers */
+
+struct drm_mode_fb_cmd2 {
+	__u32 fb_id;
+	__u32 width, height;
+	__u32 pixel_format; /* fourcc code from drm_fourcc.h */
+	__u32 flags; /* see above flags */
+
+	/*
+	 * In case of planar formats, this ioctl allows up to 4
+	 * buffer objects with offets and pitches per plane.
+	 * The pitch and offset order is dictated by the fourcc,
+	 * e.g. NV12 (http://fourcc.org/yuv.php#NV12) is described as:
+	 *
+	 *   YUV 4:2:0 image with a plane of 8 bit Y samples
+	 *   followed by an interleaved U/V plane containing
+	 *   8 bit 2x2 subsampled colour difference samples.
+	 *
+	 * So it would consist of Y as offset[0] and UV as
+	 * offeset[1].  Note that offset[0] will generally
+	 * be 0.
+	 */
+	__u32 handles[4];
+	__u32 pitches[4]; /* pitch for each plane */
+	__u32 offsets[4]; /* offset of each plane */
+};
+
+#define DRM_MODE_FB_DIRTY_ANNOTATE_COPY 0x01
+#define DRM_MODE_FB_DIRTY_ANNOTATE_FILL 0x02
+#define DRM_MODE_FB_DIRTY_FLAGS         0x03
+
+#define DRM_MODE_FB_DIRTY_MAX_CLIPS     256
+
+/*
+ * Mark a region of a framebuffer as dirty.
+ *
+ * Some hardware does not automatically update display contents
+ * as a hardware or software draw to a framebuffer. This ioctl
+ * allows userspace to tell the kernel and the hardware what
+ * regions of the framebuffer have changed.
+ *
+ * The kernel or hardware is free to update more then just the
+ * region specified by the clip rects. The kernel or hardware
+ * may also delay and/or coalesce several calls to dirty into a
+ * single update.
+ *
+ * Userspace may annotate the updates, the annotates are a
+ * promise made by the caller that the change is either a copy
+ * of pixels or a fill of a single color in the region specified.
+ *
+ * If the DRM_MODE_FB_DIRTY_ANNOTATE_COPY flag is given then
+ * the number of updated regions are half of num_clips given,
+ * where the clip rects are paired in src and dst. The width and
+ * height of each one of the pairs must match.
+ *
+ * If the DRM_MODE_FB_DIRTY_ANNOTATE_FILL flag is given the caller
+ * promises that the region specified of the clip rects is filled
+ * completely with a single color as given in the color argument.
+ */
+
+struct drm_mode_fb_dirty_cmd {
+	__u32 fb_id;
+	__u32 flags;
+	__u32 color;
+	__u32 num_clips;
+	__u64 clips_ptr;
+};
+
+struct drm_mode_mode_cmd {
+	__u32 connector_id;
+	struct drm_mode_modeinfo mode;
+};
+
+#define DRM_MODE_CURSOR_BO	(1<<0)
+#define DRM_MODE_CURSOR_MOVE	(1<<1)
+
+/*
+ * depending on the value in flags different members are used.
+ *
+ * CURSOR_BO uses
+ *    crtc
+ *    width
+ *    height
+ *    handle - if 0 turns the cursor of
+ *
+ * CURSOR_MOVE uses
+ *    crtc
+ *    x
+ *    y
+ */
+struct drm_mode_cursor {
+	__u32 flags;
+	__u32 crtc_id;
+	__s32 x;
+	__s32 y;
+	__u32 width;
+	__u32 height;
+	/* driver specific handle */
+	__u32 handle;
+};
+
+struct drm_mode_crtc_lut {
+	__u32 crtc_id;
+	__u32 gamma_size;
+
+	/* pointers to arrays */
+	__u64 red;
+	__u64 green;
+	__u64 blue;
+};
+
+#define DRM_MODE_PAGE_FLIP_EVENT 0x01
+#define DRM_MODE_PAGE_FLIP_FLAGS DRM_MODE_PAGE_FLIP_EVENT
+
+/*
+ * Request a page flip on the specified crtc.
+ *
+ * This ioctl will ask KMS to schedule a page flip for the specified
+ * crtc.  Once any pending rendering targeting the specified fb (as of
+ * ioctl time) has completed, the crtc will be reprogrammed to display
+ * that fb after the next vertical refresh.  The ioctl returns
+ * immediately, but subsequent rendering to the current fb will block
+ * in the execbuffer ioctl until the page flip happens.  If a page
+ * flip is already pending as the ioctl is called, EBUSY will be
+ * returned.
+ *
+ * The ioctl supports one flag, DRM_MODE_PAGE_FLIP_EVENT, which will
+ * request that drm sends back a vblank event (see drm.h: struct
+ * drm_event_vblank) when the page flip is done.  The user_data field
+ * passed in with this ioctl will be returned as the user_data field
+ * in the vblank event struct.
+ *
+ * The reserved field must be zero until we figure out something
+ * clever to use it for.
+ */
+
+struct drm_mode_crtc_page_flip {
+	__u32 crtc_id;
+	__u32 fb_id;
+	__u32 flags;
+	__u32 reserved;
+	__u64 user_data;
+};
+
+/* create a dumb scanout buffer */
+struct drm_mode_create_dumb {
+	uint32_t height;
+	uint32_t width;
+	uint32_t bpp;
+	uint32_t flags;
+	/* handle, pitch, size will be returned */
+	uint32_t handle;
+	uint32_t pitch;
+	uint64_t size;
+};
+
+/* set up for mmap of a dumb scanout buffer */
+struct drm_mode_map_dumb {
+	/** Handle for the object being mapped. */
+	__u32 handle;
+	__u32 pad;
+	/**
+	 * Fake offset to use for subsequent mmap call
+	 *
+	 * This is a fixed-size type for 32/64 compatibility.
+	 */
+	__u64 offset;
+};
+
+struct drm_mode_destroy_dumb {
+	uint32_t handle;
+};
+
+#endif
diff --git a/include/drm/drm_os_linux.h b/include/drm/drm_os_linux.h
new file mode 100644
index 00000000..39336914
--- /dev/null
+++ b/include/drm/drm_os_linux.h
@@ -0,0 +1,127 @@
+/**
+ * \file drm_os_linux.h
+ * OS abstraction macros.
+ */
+
+#include <linux/interrupt.h>	/* For task queue support */
+#include <linux/delay.h>
+
+#ifndef readq
+static inline u64 readq(void __iomem *reg)
+{
+	return ((u64) readl(reg)) | (((u64) readl(reg + 4UL)) << 32);
+}
+
+static inline void writeq(u64 val, void __iomem *reg)
+{
+	writel(val & 0xffffffff, reg);
+	writel(val >> 32, reg + 0x4UL);
+}
+#endif
+
+/** Current process ID */
+#define DRM_CURRENTPID			task_pid_nr(current)
+#define DRM_SUSER(p)			capable(CAP_SYS_ADMIN)
+#define DRM_UDELAY(d)			udelay(d)
+/** Read a byte from a MMIO region */
+#define DRM_READ8(map, offset)		readb(((void __iomem *)(map)->handle) + (offset))
+/** Read a word from a MMIO region */
+#define DRM_READ16(map, offset)         readw(((void __iomem *)(map)->handle) + (offset))
+/** Read a dword from a MMIO region */
+#define DRM_READ32(map, offset)		readl(((void __iomem *)(map)->handle) + (offset))
+/** Write a byte into a MMIO region */
+#define DRM_WRITE8(map, offset, val)	writeb(val, ((void __iomem *)(map)->handle) + (offset))
+/** Write a word into a MMIO region */
+#define DRM_WRITE16(map, offset, val)   writew(val, ((void __iomem *)(map)->handle) + (offset))
+/** Write a dword into a MMIO region */
+#define DRM_WRITE32(map, offset, val)	writel(val, ((void __iomem *)(map)->handle) + (offset))
+/** Read memory barrier */
+
+/** Read a qword from a MMIO region - be careful using these unless you really understand them */
+#define DRM_READ64(map, offset)		readq(((void __iomem *)(map)->handle) + (offset))
+/** Write a qword into a MMIO region */
+#define DRM_WRITE64(map, offset, val)	writeq(val, ((void __iomem *)(map)->handle) + (offset))
+
+#define DRM_READMEMORYBARRIER()		rmb()
+/** Write memory barrier */
+#define DRM_WRITEMEMORYBARRIER()	wmb()
+/** Read/write memory barrier */
+#define DRM_MEMORYBARRIER()		mb()
+
+/** IRQ handler arguments and return type and values */
+#define DRM_IRQ_ARGS		int irq, void *arg
+
+/** AGP types */
+#if __OS_HAS_AGP
+#define DRM_AGP_MEM		struct agp_memory
+#define DRM_AGP_KERN		struct agp_kern_info
+#else
+/* define some dummy types for non AGP supporting kernels */
+struct no_agp_kern {
+	unsigned long aper_base;
+	unsigned long aper_size;
+};
+#define DRM_AGP_MEM             int
+#define DRM_AGP_KERN            struct no_agp_kern
+#endif
+
+#if !(__OS_HAS_MTRR)
+static __inline__ int mtrr_add(unsigned long base, unsigned long size,
+			       unsigned int type, char increment)
+{
+	return -ENODEV;
+}
+
+static __inline__ int mtrr_del(int reg, unsigned long base, unsigned long size)
+{
+	return -ENODEV;
+}
+
+#define MTRR_TYPE_WRCOMB     1
+
+#endif
+
+/** Other copying of data to kernel space */
+#define DRM_COPY_FROM_USER(arg1, arg2, arg3)		\
+	copy_from_user(arg1, arg2, arg3)
+/** Other copying of data from kernel space */
+#define DRM_COPY_TO_USER(arg1, arg2, arg3)		\
+	copy_to_user(arg1, arg2, arg3)
+/* Macros for copyfrom user, but checking readability only once */
+#define DRM_VERIFYAREA_READ( uaddr, size )		\
+	(access_ok( VERIFY_READ, uaddr, size ) ? 0 : -EFAULT)
+#define DRM_COPY_FROM_USER_UNCHECKED(arg1, arg2, arg3)	\
+	__copy_from_user(arg1, arg2, arg3)
+#define DRM_COPY_TO_USER_UNCHECKED(arg1, arg2, arg3)	\
+	__copy_to_user(arg1, arg2, arg3)
+#define DRM_GET_USER_UNCHECKED(val, uaddr)		\
+	__get_user(val, uaddr)
+
+#define DRM_HZ HZ
+
+#define DRM_WAIT_ON( ret, queue, timeout, condition )		\
+do {								\
+	DECLARE_WAITQUEUE(entry, current);			\
+	unsigned long end = jiffies + (timeout);		\
+	add_wait_queue(&(queue), &entry);			\
+								\
+	for (;;) {						\
+		__set_current_state(TASK_INTERRUPTIBLE);	\
+		if (condition)					\
+			break;					\
+		if (time_after_eq(jiffies, end)) {		\
+			ret = -EBUSY;				\
+			break;					\
+		}						\
+		schedule_timeout((HZ/100 > 1) ? HZ/100 : 1);	\
+		if (signal_pending(current)) {			\
+			ret = -EINTR;				\
+			break;					\
+		}						\
+	}							\
+	__set_current_state(TASK_RUNNING);			\
+	remove_wait_queue(&(queue), &entry);			\
+} while (0)
+
+#define DRM_WAKEUP( queue ) wake_up( queue )
+#define DRM_INIT_WAITQUEUE( queue ) init_waitqueue_head( queue )
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
new file mode 100644
index 00000000..81368ab6
--- /dev/null
+++ b/include/drm/drm_pciids.h
@@ -0,0 +1,766 @@
+/*
+   This file is auto-generated from the drm_pciids.txt in the DRM CVS
+   Please contact dri-devel@lists.sf.net to add new cards to this list
+*/
+#define radeon_PCI_IDS \
+	{0x1002, 0x3150, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
+	{0x1002, 0x3151, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x3152, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x3154, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x3155, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x3E50, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x3E54, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x4136, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS100|RADEON_IS_IGP}, \
+	{0x1002, 0x4137, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS200|RADEON_IS_IGP}, \
+	{0x1002, 0x4144, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
+	{0x1002, 0x4145, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
+	{0x1002, 0x4146, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
+	{0x1002, 0x4147, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
+	{0x1002, 0x4148, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
+	{0x1002, 0x4149, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
+	{0x1002, 0x414A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
+	{0x1002, 0x414B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
+	{0x1002, 0x4150, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
+	{0x1002, 0x4151, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
+	{0x1002, 0x4152, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
+	{0x1002, 0x4153, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
+	{0x1002, 0x4154, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
+	{0x1002, 0x4155, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
+	{0x1002, 0x4156, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
+	{0x1002, 0x4237, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS200|RADEON_IS_IGP}, \
+	{0x1002, 0x4242, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
+	{0x1002, 0x4336, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS100|RADEON_IS_IGP|RADEON_IS_MOBILITY}, \
+	{0x1002, 0x4337, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS200|RADEON_IS_IGP|RADEON_IS_MOBILITY}, \
+	{0x1002, 0x4437, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS200|RADEON_IS_IGP|RADEON_IS_MOBILITY}, \
+	{0x1002, 0x4966, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250}, \
+	{0x1002, 0x4967, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250}, \
+	{0x1002, 0x4A48, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x4A49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x4A4A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x4A4B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x4A4C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x4A4D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x4A4E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x4A4F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x4A50, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x4A54, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x4B48, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x4B49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x4B4A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x4B4B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x4B4C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x4C57, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV200|RADEON_IS_MOBILITY}, \
+	{0x1002, 0x4C58, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV200|RADEON_IS_MOBILITY}, \
+	{0x1002, 0x4C59, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100|RADEON_IS_MOBILITY}, \
+	{0x1002, 0x4C5A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100|RADEON_IS_MOBILITY}, \
+	{0x1002, 0x4C64, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
+	{0x1002, 0x4C66, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
+	{0x1002, 0x4C67, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
+	{0x1002, 0x4C6E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280|RADEON_IS_MOBILITY}, \
+	{0x1002, 0x4E44, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
+	{0x1002, 0x4E45, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
+	{0x1002, 0x4E46, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
+	{0x1002, 0x4E47, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
+	{0x1002, 0x4E48, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
+	{0x1002, 0x4E49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
+	{0x1002, 0x4E4A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
+	{0x1002, 0x4E4B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R350}, \
+	{0x1002, 0x4E50, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|RADEON_IS_MOBILITY}, \
+	{0x1002, 0x4E51, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|RADEON_IS_MOBILITY}, \
+	{0x1002, 0x4E52, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|RADEON_IS_MOBILITY}, \
+	{0x1002, 0x4E53, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|RADEON_IS_MOBILITY}, \
+	{0x1002, 0x4E54, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|RADEON_IS_MOBILITY}, \
+	{0x1002, 0x4E56, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350|RADEON_IS_MOBILITY}, \
+	{0x1002, 0x5144, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R100|RADEON_SINGLE_CRTC}, \
+	{0x1002, 0x5145, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R100|RADEON_SINGLE_CRTC}, \
+	{0x1002, 0x5146, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R100|RADEON_SINGLE_CRTC}, \
+	{0x1002, 0x5147, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R100|RADEON_SINGLE_CRTC}, \
+	{0x1002, 0x5148, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
+	{0x1002, 0x514C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
+	{0x1002, 0x514D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
+	{0x1002, 0x5157, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV200}, \
+	{0x1002, 0x5158, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV200}, \
+	{0x1002, 0x5159, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100}, \
+	{0x1002, 0x515A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100}, \
+	{0x1002, 0x515E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100|RADEON_SINGLE_CRTC}, \
+	{0x1002, 0x5460, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
+	{0x1002, 0x5462, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
+	{0x1002, 0x5464, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
+	{0x1002, 0x5548, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5549, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x554A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x554B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x554C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x554D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x554E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x554F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5550, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5551, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5552, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5554, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x564A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x564B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x564F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5657, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5834, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP}, \
+	{0x1002, 0x5835, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP|RADEON_IS_MOBILITY}, \
+	{0x1002, 0x5954, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+	{0x1002, 0x5955, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+	{0x1002, 0x5974, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+	{0x1002, 0x5975, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+	{0x1002, 0x5960, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
+	{0x1002, 0x5961, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
+	{0x1002, 0x5962, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
+	{0x1002, 0x5964, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
+	{0x1002, 0x5965, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
+	{0x1002, 0x5969, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100|RADEON_SINGLE_CRTC}, \
+	{0x1002, 0x5a41, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_IGPGART}, \
+	{0x1002, 0x5a42, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+	{0x1002, 0x5a61, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_IGPGART}, \
+	{0x1002, 0x5a62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+	{0x1002, 0x5b60, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5b62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5b63, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5b64, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5b65, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5c61, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280|RADEON_IS_MOBILITY}, \
+	{0x1002, 0x5c63, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280|RADEON_IS_MOBILITY}, \
+	{0x1002, 0x5d48, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5d49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5d4a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5d4c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5d4d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5d4e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5d4f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5d50, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5d52, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5d57, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5e48, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5e4a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5e4b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5e4c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5e4d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5e4f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6700, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6701, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6702, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6703, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6704, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6705, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6706, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6707, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6708, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6709, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6718, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6719, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x671c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x671d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x671f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6720, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6721, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6722, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6723, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6724, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6725, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6726, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6727, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6728, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6729, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6738, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6739, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x673e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6740, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6741, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6742, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6743, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6744, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6745, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6746, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6747, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6748, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6749, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x674A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6750, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6751, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6758, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6759, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x675B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x675D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x675F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6760, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6761, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6762, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6763, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6764, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6765, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6766, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6767, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6768, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6770, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6771, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6772, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6778, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6779, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x677B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6780, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6784, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6788, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x678A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6790, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6798, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6799, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x679A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x679E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x679F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6800, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6801, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6802, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6808, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6809, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6810, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6818, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6819, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6821, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6823, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6824, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6826, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6827, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6829, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x682B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x682D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x682F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6830, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6831, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6837, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6838, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6839, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x683B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x683D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x683F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_VERDE|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6840, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6841, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6842, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6843, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6849, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x684C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6858, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6859, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6880, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6888, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6889, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x688A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x688C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x688D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6898, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x6899, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x689b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x689c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HEMLOCK|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x689d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HEMLOCK|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x689e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68a0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_JUNIPER|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68a1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_JUNIPER|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68a8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_JUNIPER|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68a9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_JUNIPER|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68b0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_JUNIPER|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68b8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_JUNIPER|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68b9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_JUNIPER|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68ba, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_JUNIPER|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68be, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_JUNIPER|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68bf, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_JUNIPER|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_REDWOOD|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68c1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_REDWOOD|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68c7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_REDWOOD|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68c8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_REDWOOD|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68c9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_REDWOOD|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68d8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_REDWOOD|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68d9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_REDWOOD|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68da, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_REDWOOD|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68de, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_REDWOOD|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68e0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68e1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68e4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68e5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68e8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68e9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68f1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68f2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68f8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68f9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68fa, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68fe, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7101, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7103, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7104, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7105, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7108, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7109, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x710A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x710B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x710C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x710E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x710F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7140, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7141, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7142, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7143, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7144, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7145, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7146, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7147, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7149, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x714A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x714B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x714C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x714D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x714E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x714F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7151, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7152, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7153, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x715E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x715F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7180, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7181, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7183, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7186, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7187, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7188, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x718A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x718B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x718C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x718D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x718F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7193, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7196, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x719B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x719F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x71C0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x71C1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x71C2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x71C3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x71C4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x71C5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x71C6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x71C7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x71CD, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x71CE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x71D2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x71D4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x71D5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x71D6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x71DA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x71DE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV530|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7210, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV515|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7243, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7244, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7245, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7246, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7247, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7248, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7249, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x724A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x724B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x724C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x724D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x724E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x724F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7280, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV570|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7281, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV560|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7283, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV560|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7284, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R580|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7287, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV560|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7288, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV570|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7289, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV570|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x728B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV570|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x728C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV570|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7290, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV560|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7291, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV560|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7293, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV560|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7297, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV560|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7834, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7835, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x791e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS690|RADEON_IS_IGP|RADEON_NEW_MEMMAP|RADEON_IS_IGPGART}, \
+	{0x1002, 0x791f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS690|RADEON_IS_IGP|RADEON_NEW_MEMMAP|RADEON_IS_IGPGART}, \
+	{0x1002, 0x793f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS600|RADEON_IS_IGP|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7941, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS600|RADEON_IS_IGP|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x7942, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS600|RADEON_IS_IGP|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x796c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS740|RADEON_IS_IGP|RADEON_NEW_MEMMAP|RADEON_IS_IGPGART}, \
+	{0x1002, 0x796d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS740|RADEON_IS_IGP|RADEON_NEW_MEMMAP|RADEON_IS_IGPGART}, \
+	{0x1002, 0x796e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS740|RADEON_IS_IGP|RADEON_NEW_MEMMAP|RADEON_IS_IGPGART}, \
+	{0x1002, 0x796f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS740|RADEON_IS_IGP|RADEON_NEW_MEMMAP|RADEON_IS_IGPGART}, \
+	{0x1002, 0x9400, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R600|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9401, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R600|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9402, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R600|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9403, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R600|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9405, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R600|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x940A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R600|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x940B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R600|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x940F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R600|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94A0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94A1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94A3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94B1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94B3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94B4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94B5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94B9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV740|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9440, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9441, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9442, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9443, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9444, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9446, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x944A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x944B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x944C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x944E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9450, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9452, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9456, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x945A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x945B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x945E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9460, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9462, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x946A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x946B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x947A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x947B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9480, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9487, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9488, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9489, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x948A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x948F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9490, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9491, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9495, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9498, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x949C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x949E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x949F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94C0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV610|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94C1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV610|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94C3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV610|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94C4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV610|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94C5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV610|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94C6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV610|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94C7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV610|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94C8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV610|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94C9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV610|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94CB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV610|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94CC, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV610|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x94CD, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV610|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9500, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV670|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9501, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV670|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9504, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV670|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9505, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV670|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9506, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV670|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9507, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV670|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9508, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV670|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9509, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV670|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x950F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV670|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9511, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV670|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9515, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV670|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9517, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV670|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9519, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV670|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9540, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV710|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9541, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV710|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9542, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV710|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x954E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV710|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x954F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV710|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9552, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV710|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9553, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV710|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9555, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV710|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9557, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV710|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x955f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV710|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9580, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV630|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9581, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV630|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9583, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV630|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9586, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV630|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9587, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV630|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9588, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV630|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9589, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV630|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x958A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV630|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x958B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV630|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x958C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV630|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x958D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV630|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x958E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV630|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x958F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV630|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9590, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV635|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9591, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV635|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9593, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV635|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9595, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV635|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9596, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV635|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9597, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV635|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9598, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV635|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9599, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV635|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x959B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV635|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x95C0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x95C2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x95C4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x95C5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x95C6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x95C7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x95C9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x95CC, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x95CD, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x95CE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x95CF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x9610, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS780|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9611, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS780|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9612, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS780|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9613, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS780|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9614, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS780|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9615, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS780|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9616, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS780|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9640, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9641, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9642, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO2|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9643, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO2|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9644, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO2|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9645, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO2|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9647, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\
+	{0x1002, 0x9648, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\
+	{0x1002, 0x9649, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\
+	{0x1002, 0x964a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x964b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x964c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x964e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\
+	{0x1002, 0x964f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\
+	{0x1002, 0x9710, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9711, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9712, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9713, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9714, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9715, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9802, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9803, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9804, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9805, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9806, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9807, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9808, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9809, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x980A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9900, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9901, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9903, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9904, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9905, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9906, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9907, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9908, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9909, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x990A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x990F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9910, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9913, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9917, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9918, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9919, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9990, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9991, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9992, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9993, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x9994, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x99A0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x99A2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0x1002, 0x99A4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+	{0, 0, 0}
+
+#define r128_PCI_IDS \
+	{0x1002, 0x4c45, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x4c46, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x4d46, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x4d4c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x5041, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x5042, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x5043, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x5044, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x5045, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x5046, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x5047, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x5048, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x5049, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x504A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x504B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x504C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x504D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x504E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x504F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x5050, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x5051, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x5052, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x5053, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x5054, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x5055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x5056, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x5057, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x5058, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x5245, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x5246, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x5247, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x524b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x524c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x534d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x5446, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x544C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x5452, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0, 0, 0}
+
+#define mga_PCI_IDS \
+	{0x102b, 0x0520, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MGA_CARD_TYPE_G200}, \
+	{0x102b, 0x0521, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MGA_CARD_TYPE_G200}, \
+	{0x102b, 0x0525, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MGA_CARD_TYPE_G400}, \
+	{0x102b, 0x2527, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MGA_CARD_TYPE_G550}, \
+	{0, 0, 0}
+
+#define mach64_PCI_IDS \
+	{0x1002, 0x4749, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x4750, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x4751, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x4742, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x4744, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x4c49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x4c50, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x4c51, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x4c42, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x4c44, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x474c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x474f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x4752, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x4753, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x474d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x474e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x4c52, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x4c53, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x4c4d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1002, 0x4c4e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0, 0, 0}
+
+#define sisdrv_PCI_IDS \
+	{0x1039, 0x0300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1039, 0x5300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1039, 0x6300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1039, 0x6330, PCI_ANY_ID, PCI_ANY_ID, 0, 0, SIS_CHIP_315}, \
+	{0x1039, 0x6351, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1039, 0x7300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x18CA, 0x0040, PCI_ANY_ID, PCI_ANY_ID, 0, 0, SIS_CHIP_315}, \
+	{0x18CA, 0x0042, PCI_ANY_ID, PCI_ANY_ID, 0, 0, SIS_CHIP_315}, \
+	{0, 0, 0}
+
+#define tdfx_PCI_IDS \
+	{0x121a, 0x0003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x121a, 0x0004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x121a, 0x0005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x121a, 0x0007, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x121a, 0x0009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x121a, 0x000b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0, 0, 0}
+
+#define viadrv_PCI_IDS \
+	{0x1106, 0x3022, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1106, 0x3118, PCI_ANY_ID, PCI_ANY_ID, 0, 0, VIA_PRO_GROUP_A}, \
+	{0x1106, 0x3122, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1106, 0x7205, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1106, 0x3108, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1106, 0x3344, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1106, 0x3343, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x1106, 0x3230, PCI_ANY_ID, PCI_ANY_ID, 0, 0, VIA_DX9_0}, \
+	{0x1106, 0x3157, PCI_ANY_ID, PCI_ANY_ID, 0, 0, VIA_PRO_GROUP_A}, \
+	{0, 0, 0}
+
+#define i810_PCI_IDS \
+	{0x8086, 0x7121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x8086, 0x7123, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x8086, 0x7125, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x8086, 0x1132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0, 0, 0}
+
+#define i830_PCI_IDS \
+	{0x8086, 0x3577, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x8086, 0x2562, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x8086, 0x3582, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x8086, 0x2572, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x8086, 0x358e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0, 0, 0}
+
+#define gamma_PCI_IDS \
+	{0x3d3d, 0x0008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0, 0, 0}
+
+#define savage_PCI_IDS \
+	{0x5333, 0x8a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE3D}, \
+	{0x5333, 0x8a21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE3D}, \
+	{0x5333, 0x8a22, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE4}, \
+	{0x5333, 0x8a23, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE4}, \
+	{0x5333, 0x8c10, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE_MX}, \
+	{0x5333, 0x8c11, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE_MX}, \
+	{0x5333, 0x8c12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE_MX}, \
+	{0x5333, 0x8c13, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SAVAGE_MX}, \
+	{0x5333, 0x8c22, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \
+	{0x5333, 0x8c24, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \
+	{0x5333, 0x8c26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \
+	{0x5333, 0x8c2a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \
+	{0x5333, 0x8c2b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \
+	{0x5333, 0x8c2c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \
+	{0x5333, 0x8c2d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \
+	{0x5333, 0x8c2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \
+	{0x5333, 0x8c2f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_SUPERSAVAGE}, \
+	{0x5333, 0x8a25, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_PROSAVAGE}, \
+	{0x5333, 0x8a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_PROSAVAGE}, \
+	{0x5333, 0x8d01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_TWISTER}, \
+	{0x5333, 0x8d02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_TWISTER}, \
+	{0x5333, 0x8d03, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_PROSAVAGEDDR}, \
+	{0x5333, 0x8d04, PCI_ANY_ID, PCI_ANY_ID, 0, 0, S3_PROSAVAGEDDR}, \
+	{0, 0, 0}
+
+#define ffb_PCI_IDS \
+	{0, 0, 0}
+
+#define i915_PCI_IDS \
+	{0x8086, 0x3577, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x2562, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x3582, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x2572, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x2582, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x258a, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x2592, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x2772, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x27a2, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x27ae, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x2972, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x2982, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x2992, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x29a2, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x29b2, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x29c2, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x29d2, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x2a02, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x2a12, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x2a42, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x2e02, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x2e12, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x2e22, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x2e32, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x2e42, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0xa001, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0xa011, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x35e8, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x0042, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x0046, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0x8086, 0x0102, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+	{0, 0, 0}
diff --git a/include/drm/drm_sarea.h b/include/drm/drm_sarea.h
new file mode 100644
index 00000000..ee5389d2
--- /dev/null
+++ b/include/drm/drm_sarea.h
@@ -0,0 +1,84 @@
+/**
+ * \file drm_sarea.h
+ * \brief SAREA definitions
+ *
+ * \author Michel Dänzer <michel@daenzer.net>
+ */
+
+/*
+ * Copyright 2002 Tungsten Graphics, Inc., Cedar Park, Texas.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DRM_SAREA_H_
+#define _DRM_SAREA_H_
+
+#include "drm.h"
+
+/* SAREA area needs to be at least a page */
+#if defined(__alpha__)
+#define SAREA_MAX                       0x2000U
+#elif defined(__ia64__)
+#define SAREA_MAX                       0x10000U	/* 64kB */
+#else
+/* Intel 830M driver needs at least 8k SAREA */
+#define SAREA_MAX                       0x2000U
+#endif
+
+/** Maximum number of drawables in the SAREA */
+#define SAREA_MAX_DRAWABLES		256
+
+#define SAREA_DRAWABLE_CLAIMED_ENTRY    0x80000000
+
+/** SAREA drawable */
+struct drm_sarea_drawable {
+	unsigned int stamp;
+	unsigned int flags;
+};
+
+/** SAREA frame */
+struct drm_sarea_frame {
+	unsigned int x;
+	unsigned int y;
+	unsigned int width;
+	unsigned int height;
+	unsigned int fullscreen;
+};
+
+/** SAREA */
+struct drm_sarea {
+    /** first thing is always the DRM locking structure */
+	struct drm_hw_lock lock;
+    /** \todo Use readers/writer lock for drm_sarea::drawable_lock */
+	struct drm_hw_lock drawable_lock;
+	struct drm_sarea_drawable drawableTable[SAREA_MAX_DRAWABLES];	/**< drawables */
+	struct drm_sarea_frame frame;	/**< frame */
+	drm_context_t dummy_context;
+};
+
+#ifndef __KERNEL__
+typedef struct drm_sarea_drawable drm_sarea_drawable_t;
+typedef struct drm_sarea_frame drm_sarea_frame_t;
+typedef struct drm_sarea drm_sarea_t;
+#endif
+
+#endif				/* _DRM_SAREA_H_ */
diff --git a/include/drm/drm_sysfs.h b/include/drm/drm_sysfs.h
new file mode 100644
index 00000000..1d8e033f
--- /dev/null
+++ b/include/drm/drm_sysfs.h
@@ -0,0 +1,12 @@
+#ifndef _DRM_SYSFS_H_
+#define _DRM_SYSFS_H_
+
+/**
+ * This minimalistic include file is intended for users (read TTM) that
+ * don't want to include the full drmP.h file.
+ */
+
+extern int drm_class_device_register(struct device *dev);
+extern void drm_class_device_unregister(struct device *dev);
+
+#endif
diff --git a/include/drm/drm_usb.h b/include/drm/drm_usb.h
new file mode 100644
index 00000000..33506c11
--- /dev/null
+++ b/include/drm/drm_usb.h
@@ -0,0 +1,15 @@
+#ifndef DRM_USB_H
+#define DRM_USB_H
+
+#include <drmP.h>
+
+#include <linux/usb.h>
+
+extern int drm_usb_init(struct drm_driver *driver, struct usb_driver *udriver);
+extern void drm_usb_exit(struct drm_driver *driver, struct usb_driver *udriver);
+
+int drm_get_usb_dev(struct usb_interface *interface,
+		    const struct usb_device_id *id,
+		    struct drm_driver *driver);
+
+#endif
diff --git a/include/drm/exynos_drm.h b/include/drm/exynos_drm.h
new file mode 100644
index 00000000..e478de4e
--- /dev/null
+++ b/include/drm/exynos_drm.h
@@ -0,0 +1,185 @@
+/* exynos_drm.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * Authors:
+ *	Inki Dae <inki.dae@samsung.com>
+ *	Joonyoung Shim <jy0922.shim@samsung.com>
+ *	Seung-Woo Kim <sw0312.kim@samsung.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _EXYNOS_DRM_H_
+#define _EXYNOS_DRM_H_
+
+/**
+ * User-desired buffer creation information structure.
+ *
+ * @size: user-desired memory allocation size.
+ *	- this size value would be page-aligned internally.
+ * @flags: user request for setting memory type or cache attributes.
+ * @handle: returned a handle to created gem object.
+ *	- this handle will be set by gem module of kernel side.
+ */
+struct drm_exynos_gem_create {
+	uint64_t size;
+	unsigned int flags;
+	unsigned int handle;
+};
+
+/**
+ * A structure for getting buffer offset.
+ *
+ * @handle: a pointer to gem object created.
+ * @pad: just padding to be 64-bit aligned.
+ * @offset: relatived offset value of the memory region allocated.
+ *	- this value should be set by user.
+ */
+struct drm_exynos_gem_map_off {
+	unsigned int handle;
+	unsigned int pad;
+	uint64_t offset;
+};
+
+/**
+ * A structure for mapping buffer.
+ *
+ * @handle: a handle to gem object created.
+ * @size: memory size to be mapped.
+ * @mapped: having user virtual address mmaped.
+ *	- this variable would be filled by exynos gem module
+ *	of kernel side with user virtual address which is allocated
+ *	by do_mmap().
+ */
+struct drm_exynos_gem_mmap {
+	unsigned int handle;
+	unsigned int size;
+	uint64_t mapped;
+};
+
+/**
+ * A structure for user connection request of virtual display.
+ *
+ * @connection: indicate whether doing connetion or not by user.
+ * @extensions: if this value is 1 then the vidi driver would need additional
+ *	128bytes edid data.
+ * @edid: the edid data pointer from user side.
+ */
+struct drm_exynos_vidi_connection {
+	unsigned int connection;
+	unsigned int extensions;
+	uint64_t edid;
+};
+
+struct drm_exynos_plane_set_zpos {
+	__u32 plane_id;
+	__s32 zpos;
+};
+
+/* memory type definitions. */
+enum e_drm_exynos_gem_mem_type {
+	/* Physically Non-Continuous memory. */
+	EXYNOS_BO_NONCONTIG	= 1 << 0,
+	EXYNOS_BO_MASK		= EXYNOS_BO_NONCONTIG
+};
+
+#define DRM_EXYNOS_GEM_CREATE		0x00
+#define DRM_EXYNOS_GEM_MAP_OFFSET	0x01
+#define DRM_EXYNOS_GEM_MMAP		0x02
+/* Reserved 0x03 ~ 0x05 for exynos specific gem ioctl */
+#define DRM_EXYNOS_PLANE_SET_ZPOS	0x06
+#define DRM_EXYNOS_VIDI_CONNECTION	0x07
+
+#define DRM_IOCTL_EXYNOS_GEM_CREATE		DRM_IOWR(DRM_COMMAND_BASE + \
+		DRM_EXYNOS_GEM_CREATE, struct drm_exynos_gem_create)
+
+#define DRM_IOCTL_EXYNOS_GEM_MAP_OFFSET	DRM_IOWR(DRM_COMMAND_BASE + \
+		DRM_EXYNOS_GEM_MAP_OFFSET, struct drm_exynos_gem_map_off)
+
+#define DRM_IOCTL_EXYNOS_GEM_MMAP	DRM_IOWR(DRM_COMMAND_BASE + \
+		DRM_EXYNOS_GEM_MMAP, struct drm_exynos_gem_mmap)
+
+#define DRM_IOCTL_EXYNOS_PLANE_SET_ZPOS	DRM_IOWR(DRM_COMMAND_BASE + \
+		DRM_EXYNOS_PLANE_SET_ZPOS, struct drm_exynos_plane_set_zpos)
+
+#define DRM_IOCTL_EXYNOS_VIDI_CONNECTION	DRM_IOWR(DRM_COMMAND_BASE + \
+		DRM_EXYNOS_VIDI_CONNECTION, struct drm_exynos_vidi_connection)
+
+#ifdef __KERNEL__
+
+/**
+ * A structure for lcd panel information.
+ *
+ * @timing: default video mode for initializing
+ * @width_mm: physical size of lcd width.
+ * @height_mm: physical size of lcd height.
+ */
+struct exynos_drm_panel_info {
+	struct fb_videomode timing;
+	u32 width_mm;
+	u32 height_mm;
+};
+
+/**
+ * Platform Specific Structure for DRM based FIMD.
+ *
+ * @panel: default panel info for initializing
+ * @default_win: default window layer number to be used for UI.
+ * @bpp: default bit per pixel.
+ */
+struct exynos_drm_fimd_pdata {
+	struct exynos_drm_panel_info panel;
+	u32				vidcon0;
+	u32				vidcon1;
+	unsigned int			default_win;
+	unsigned int			bpp;
+};
+
+/**
+ * Platform Specific Structure for DRM based HDMI.
+ *
+ * @hdmi_dev: device point to specific hdmi driver.
+ * @mixer_dev: device point to specific mixer driver.
+ *
+ * this structure is used for common hdmi driver and each device object
+ * would be used to access specific device driver(hdmi or mixer driver)
+ */
+struct exynos_drm_common_hdmi_pd {
+	struct device *hdmi_dev;
+	struct device *mixer_dev;
+};
+
+/**
+ * Platform Specific Structure for DRM based HDMI core.
+ *
+ * @timing: default video mode for initializing
+ * @default_win: default window layer number to be used for UI.
+ * @bpp: default bit per pixel.
+ * @is_v13: set if hdmi version 13 is.
+ */
+struct exynos_drm_hdmi_pdata {
+	struct fb_videomode		timing;
+	unsigned int			default_win;
+	unsigned int			bpp;
+	unsigned int			is_v13:1;
+};
+
+#endif	/* __KERNEL__ */
+#endif	/* _EXYNOS_DRM_H_ */
diff --git a/include/drm/gma_drm.h b/include/drm/gma_drm.h
new file mode 100644
index 00000000..884613ee
--- /dev/null
+++ b/include/drm/gma_drm.h
@@ -0,0 +1,91 @@
+/**************************************************************************
+ * Copyright (c) 2007-2011, Intel Corporation.
+ * All Rights Reserved.
+ * Copyright (c) 2008, Tungsten Graphics Inc.  Cedar Park, TX., USA.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ **************************************************************************/
+
+#ifndef _PSB_DRM_H_
+#define _PSB_DRM_H_
+
+/*
+ *	Manage the LUT for an output
+ */
+struct drm_psb_dpst_lut_arg {
+	uint8_t lut[256];
+	int output_id;
+};
+
+/*
+ *	Validate modes
+ */
+struct drm_psb_mode_operation_arg {
+	u32 obj_id;
+	u16 operation;
+	struct drm_mode_modeinfo mode;
+	u64 data;
+};
+
+/*
+ *	Query the stolen memory for smarter management of
+ *	memory by the server
+ */
+struct drm_psb_stolen_memory_arg {
+	u32 base;
+	u32 size;
+};
+
+struct drm_psb_get_pipe_from_crtc_id_arg {
+	/** ID of CRTC being requested **/
+	u32 crtc_id;
+	/** pipe of requested CRTC **/
+	u32 pipe;
+};
+
+struct drm_psb_gem_create {
+	__u64 size;
+	__u32 handle;
+	__u32 flags;
+#define GMA_GEM_CREATE_STOLEN		1	/* Stolen memory can be used */
+};
+
+struct drm_psb_gem_mmap {
+	__u32 handle;
+	__u32 pad;
+	/**
+	 * Fake offset to use for subsequent mmap call
+	 *
+	 * This is a fixed-size type for 32/64 compatibility.
+	 */
+	__u64 offset;
+};
+
+/* Controlling the kernel modesetting buffers */
+
+#define DRM_GMA_GEM_CREATE	0x00		/* Create a GEM object */
+#define DRM_GMA_GEM_MMAP	0x01		/* Map GEM memory */
+#define DRM_GMA_STOLEN_MEMORY	0x02		/* Report stolen memory */
+#define DRM_GMA_2D_OP		0x03		/* Will be merged later */
+#define DRM_GMA_GAMMA		0x04		/* Set gamma table */
+#define DRM_GMA_ADB		0x05		/* Get backlight */
+#define DRM_GMA_DPST_BL		0x06		/* Set backlight */
+#define DRM_GMA_MODE_OPERATION	0x07		/* Mode validation/DC set */
+#define 	PSB_MODE_OPERATION_MODE_VALID	0x01
+#define DRM_GMA_GET_PIPE_FROM_CRTC_ID	0x08	/* CRTC to physical pipe# */
+
+
+#endif
diff --git a/include/drm/i2c/ch7006.h b/include/drm/i2c/ch7006.h
new file mode 100644
index 00000000..8390b437
--- /dev/null
+++ b/include/drm/i2c/ch7006.h
@@ -0,0 +1,86 @@
+/*
+ * Copyright (C) 2009 Francisco Jerez.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial
+ * portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE
+ * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+ * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifndef __DRM_I2C_CH7006_H__
+#define __DRM_I2C_CH7006_H__
+
+/**
+ * struct ch7006_encoder_params
+ *
+ * Describes how the ch7006 is wired up with the GPU. It should be
+ * used as the @params parameter of its @set_config method.
+ *
+ * See "http://www.chrontel.com/pdf/7006.pdf" for their precise
+ * meaning.
+ */
+struct ch7006_encoder_params {
+	enum {
+		CH7006_FORMAT_RGB16 = 0,
+		CH7006_FORMAT_YCrCb24m16,
+		CH7006_FORMAT_RGB24m16,
+		CH7006_FORMAT_RGB15,
+		CH7006_FORMAT_RGB24m12C,
+		CH7006_FORMAT_RGB24m12I,
+		CH7006_FORMAT_RGB24m8,
+		CH7006_FORMAT_RGB16m8,
+		CH7006_FORMAT_RGB15m8,
+		CH7006_FORMAT_YCrCb24m8,
+	} input_format;
+
+	enum {
+		CH7006_CLOCK_SLAVE = 0,
+		CH7006_CLOCK_MASTER,
+	} clock_mode;
+
+	enum {
+		CH7006_CLOCK_EDGE_NEG = 0,
+		CH7006_CLOCK_EDGE_POS,
+	} clock_edge;
+
+	int xcm, pcm;
+
+	enum {
+		CH7006_SYNC_SLAVE = 0,
+		CH7006_SYNC_MASTER,
+	} sync_direction;
+
+	enum {
+		CH7006_SYNC_SEPARATED = 0,
+		CH7006_SYNC_EMBEDDED,
+	} sync_encoding;
+
+	enum {
+		CH7006_POUT_1_8V = 0,
+		CH7006_POUT_3_3V,
+	} pout_level;
+
+	enum {
+		CH7006_ACTIVE_HSYNC = 0,
+		CH7006_ACTIVE_DSTART,
+	} active_detect;
+};
+
+#endif
diff --git a/include/drm/i2c/sil164.h b/include/drm/i2c/sil164.h
new file mode 100644
index 00000000..205e2738
--- /dev/null
+++ b/include/drm/i2c/sil164.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2010 Francisco Jerez.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial
+ * portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE
+ * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+ * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifndef __DRM_I2C_SIL164_H__
+#define __DRM_I2C_SIL164_H__
+
+/**
+ * struct sil164_encoder_params
+ *
+ * Describes how the sil164 is connected to the GPU. It should be used
+ * as the @params parameter of its @set_config method.
+ *
+ * See "http://www.siliconimage.com/docs/SiI-DS-0021-E-164.pdf".
+ */
+struct sil164_encoder_params {
+	enum {
+		SIL164_INPUT_EDGE_FALLING = 0,
+		SIL164_INPUT_EDGE_RISING
+	} input_edge;
+
+	enum {
+		SIL164_INPUT_WIDTH_12BIT = 0,
+		SIL164_INPUT_WIDTH_24BIT
+	} input_width;
+
+	enum {
+		SIL164_INPUT_SINGLE_EDGE = 0,
+		SIL164_INPUT_DUAL_EDGE
+	} input_dual;
+
+	enum {
+		SIL164_PLL_FILTER_ON = 0,
+		SIL164_PLL_FILTER_OFF,
+	} pll_filter;
+
+	int input_skew; /** < Allowed range [-4, 3], use 0 for no de-skew. */
+	int duallink_skew; /** < Allowed range [-4, 3]. */
+};
+
+#endif
diff --git a/include/drm/i810_drm.h b/include/drm/i810_drm.h
new file mode 100644
index 00000000..7a10bb6f
--- /dev/null
+++ b/include/drm/i810_drm.h
@@ -0,0 +1,281 @@
+#ifndef _I810_DRM_H_
+#define _I810_DRM_H_
+
+/* WARNING: These defines must be the same as what the Xserver uses.
+ * if you change them, you must change the defines in the Xserver.
+ */
+
+#ifndef _I810_DEFINES_
+#define _I810_DEFINES_
+
+#define I810_DMA_BUF_ORDER		12
+#define I810_DMA_BUF_SZ 		(1<<I810_DMA_BUF_ORDER)
+#define I810_DMA_BUF_NR 		256
+#define I810_NR_SAREA_CLIPRECTS 	8
+
+/* Each region is a minimum of 64k, and there are at most 64 of them.
+ */
+#define I810_NR_TEX_REGIONS 64
+#define I810_LOG_MIN_TEX_REGION_SIZE 16
+#endif
+
+#define I810_UPLOAD_TEX0IMAGE  0x1	/* handled clientside */
+#define I810_UPLOAD_TEX1IMAGE  0x2	/* handled clientside */
+#define I810_UPLOAD_CTX        0x4
+#define I810_UPLOAD_BUFFERS    0x8
+#define I810_UPLOAD_TEX0       0x10
+#define I810_UPLOAD_TEX1       0x20
+#define I810_UPLOAD_CLIPRECTS  0x40
+
+/* Indices into buf.Setup where various bits of state are mirrored per
+ * context and per buffer.  These can be fired at the card as a unit,
+ * or in a piecewise fashion as required.
+ */
+
+/* Destbuffer state
+ *    - backbuffer linear offset and pitch -- invarient in the current dri
+ *    - zbuffer linear offset and pitch -- also invarient
+ *    - drawing origin in back and depth buffers.
+ *
+ * Keep the depth/back buffer state here to accommodate private buffers
+ * in the future.
+ */
+#define I810_DESTREG_DI0  0	/* CMD_OP_DESTBUFFER_INFO (2 dwords) */
+#define I810_DESTREG_DI1  1
+#define I810_DESTREG_DV0  2	/* GFX_OP_DESTBUFFER_VARS (2 dwords) */
+#define I810_DESTREG_DV1  3
+#define I810_DESTREG_DR0  4	/* GFX_OP_DRAWRECT_INFO (4 dwords) */
+#define I810_DESTREG_DR1  5
+#define I810_DESTREG_DR2  6
+#define I810_DESTREG_DR3  7
+#define I810_DESTREG_DR4  8
+#define I810_DEST_SETUP_SIZE 10
+
+/* Context state
+ */
+#define I810_CTXREG_CF0   0	/* GFX_OP_COLOR_FACTOR */
+#define I810_CTXREG_CF1   1
+#define I810_CTXREG_ST0   2	/* GFX_OP_STIPPLE */
+#define I810_CTXREG_ST1   3
+#define I810_CTXREG_VF    4	/* GFX_OP_VERTEX_FMT */
+#define I810_CTXREG_MT    5	/* GFX_OP_MAP_TEXELS */
+#define I810_CTXREG_MC0   6	/* GFX_OP_MAP_COLOR_STAGES - stage 0 */
+#define I810_CTXREG_MC1   7	/* GFX_OP_MAP_COLOR_STAGES - stage 1 */
+#define I810_CTXREG_MC2   8	/* GFX_OP_MAP_COLOR_STAGES - stage 2 */
+#define I810_CTXREG_MA0   9	/* GFX_OP_MAP_ALPHA_STAGES - stage 0 */
+#define I810_CTXREG_MA1   10	/* GFX_OP_MAP_ALPHA_STAGES - stage 1 */
+#define I810_CTXREG_MA2   11	/* GFX_OP_MAP_ALPHA_STAGES - stage 2 */
+#define I810_CTXREG_SDM   12	/* GFX_OP_SRC_DEST_MONO */
+#define I810_CTXREG_FOG   13	/* GFX_OP_FOG_COLOR */
+#define I810_CTXREG_B1    14	/* GFX_OP_BOOL_1 */
+#define I810_CTXREG_B2    15	/* GFX_OP_BOOL_2 */
+#define I810_CTXREG_LCS   16	/* GFX_OP_LINEWIDTH_CULL_SHADE_MODE */
+#define I810_CTXREG_PV    17	/* GFX_OP_PV_RULE -- Invarient! */
+#define I810_CTXREG_ZA    18	/* GFX_OP_ZBIAS_ALPHAFUNC */
+#define I810_CTXREG_AA    19	/* GFX_OP_ANTIALIAS */
+#define I810_CTX_SETUP_SIZE 20
+
+/* Texture state (per tex unit)
+ */
+#define I810_TEXREG_MI0  0	/* GFX_OP_MAP_INFO (4 dwords) */
+#define I810_TEXREG_MI1  1
+#define I810_TEXREG_MI2  2
+#define I810_TEXREG_MI3  3
+#define I810_TEXREG_MF   4	/* GFX_OP_MAP_FILTER */
+#define I810_TEXREG_MLC  5	/* GFX_OP_MAP_LOD_CTL */
+#define I810_TEXREG_MLL  6	/* GFX_OP_MAP_LOD_LIMITS */
+#define I810_TEXREG_MCS  7	/* GFX_OP_MAP_COORD_SETS ??? */
+#define I810_TEX_SETUP_SIZE 8
+
+/* Flags for clear ioctl
+ */
+#define I810_FRONT   0x1
+#define I810_BACK    0x2
+#define I810_DEPTH   0x4
+
+typedef enum _drm_i810_init_func {
+	I810_INIT_DMA = 0x01,
+	I810_CLEANUP_DMA = 0x02,
+	I810_INIT_DMA_1_4 = 0x03
+} drm_i810_init_func_t;
+
+/* This is the init structure after v1.2 */
+typedef struct _drm_i810_init {
+	drm_i810_init_func_t func;
+	unsigned int mmio_offset;
+	unsigned int buffers_offset;
+	int sarea_priv_offset;
+	unsigned int ring_start;
+	unsigned int ring_end;
+	unsigned int ring_size;
+	unsigned int front_offset;
+	unsigned int back_offset;
+	unsigned int depth_offset;
+	unsigned int overlay_offset;
+	unsigned int overlay_physical;
+	unsigned int w;
+	unsigned int h;
+	unsigned int pitch;
+	unsigned int pitch_bits;
+} drm_i810_init_t;
+
+/* This is the init structure prior to v1.2 */
+typedef struct _drm_i810_pre12_init {
+	drm_i810_init_func_t func;
+	unsigned int mmio_offset;
+	unsigned int buffers_offset;
+	int sarea_priv_offset;
+	unsigned int ring_start;
+	unsigned int ring_end;
+	unsigned int ring_size;
+	unsigned int front_offset;
+	unsigned int back_offset;
+	unsigned int depth_offset;
+	unsigned int w;
+	unsigned int h;
+	unsigned int pitch;
+	unsigned int pitch_bits;
+} drm_i810_pre12_init_t;
+
+/* Warning: If you change the SAREA structure you must change the Xserver
+ * structure as well */
+
+typedef struct _drm_i810_tex_region {
+	unsigned char next, prev;	/* indices to form a circular LRU  */
+	unsigned char in_use;	/* owned by a client, or free? */
+	int age;		/* tracked by clients to update local LRU's */
+} drm_i810_tex_region_t;
+
+typedef struct _drm_i810_sarea {
+	unsigned int ContextState[I810_CTX_SETUP_SIZE];
+	unsigned int BufferState[I810_DEST_SETUP_SIZE];
+	unsigned int TexState[2][I810_TEX_SETUP_SIZE];
+	unsigned int dirty;
+
+	unsigned int nbox;
+	struct drm_clip_rect boxes[I810_NR_SAREA_CLIPRECTS];
+
+	/* Maintain an LRU of contiguous regions of texture space.  If
+	 * you think you own a region of texture memory, and it has an
+	 * age different to the one you set, then you are mistaken and
+	 * it has been stolen by another client.  If global texAge
+	 * hasn't changed, there is no need to walk the list.
+	 *
+	 * These regions can be used as a proxy for the fine-grained
+	 * texture information of other clients - by maintaining them
+	 * in the same lru which is used to age their own textures,
+	 * clients have an approximate lru for the whole of global
+	 * texture space, and can make informed decisions as to which
+	 * areas to kick out.  There is no need to choose whether to
+	 * kick out your own texture or someone else's - simply eject
+	 * them all in LRU order.
+	 */
+
+	drm_i810_tex_region_t texList[I810_NR_TEX_REGIONS + 1];
+	/* Last elt is sentinal */
+	int texAge;		/* last time texture was uploaded */
+	int last_enqueue;	/* last time a buffer was enqueued */
+	int last_dispatch;	/* age of the most recently dispatched buffer */
+	int last_quiescent;	/*  */
+	int ctxOwner;		/* last context to upload state */
+
+	int vertex_prim;
+
+	int pf_enabled;		/* is pageflipping allowed? */
+	int pf_active;
+	int pf_current_page;	/* which buffer is being displayed? */
+} drm_i810_sarea_t;
+
+/* WARNING: If you change any of these defines, make sure to change the
+ * defines in the Xserver file (xf86drmMga.h)
+ */
+
+/* i810 specific ioctls
+ * The device specific ioctl range is 0x40 to 0x79.
+ */
+#define DRM_I810_INIT		0x00
+#define DRM_I810_VERTEX		0x01
+#define DRM_I810_CLEAR		0x02
+#define DRM_I810_FLUSH		0x03
+#define DRM_I810_GETAGE		0x04
+#define DRM_I810_GETBUF		0x05
+#define DRM_I810_SWAP		0x06
+#define DRM_I810_COPY		0x07
+#define DRM_I810_DOCOPY		0x08
+#define DRM_I810_OV0INFO	0x09
+#define DRM_I810_FSTATUS	0x0a
+#define DRM_I810_OV0FLIP	0x0b
+#define DRM_I810_MC		0x0c
+#define DRM_I810_RSTATUS	0x0d
+#define DRM_I810_FLIP		0x0e
+
+#define DRM_IOCTL_I810_INIT		DRM_IOW( DRM_COMMAND_BASE + DRM_I810_INIT, drm_i810_init_t)
+#define DRM_IOCTL_I810_VERTEX		DRM_IOW( DRM_COMMAND_BASE + DRM_I810_VERTEX, drm_i810_vertex_t)
+#define DRM_IOCTL_I810_CLEAR		DRM_IOW( DRM_COMMAND_BASE + DRM_I810_CLEAR, drm_i810_clear_t)
+#define DRM_IOCTL_I810_FLUSH		DRM_IO(  DRM_COMMAND_BASE + DRM_I810_FLUSH)
+#define DRM_IOCTL_I810_GETAGE		DRM_IO(  DRM_COMMAND_BASE + DRM_I810_GETAGE)
+#define DRM_IOCTL_I810_GETBUF		DRM_IOWR(DRM_COMMAND_BASE + DRM_I810_GETBUF, drm_i810_dma_t)
+#define DRM_IOCTL_I810_SWAP		DRM_IO(  DRM_COMMAND_BASE + DRM_I810_SWAP)
+#define DRM_IOCTL_I810_COPY		DRM_IOW( DRM_COMMAND_BASE + DRM_I810_COPY, drm_i810_copy_t)
+#define DRM_IOCTL_I810_DOCOPY		DRM_IO(  DRM_COMMAND_BASE + DRM_I810_DOCOPY)
+#define DRM_IOCTL_I810_OV0INFO		DRM_IOR( DRM_COMMAND_BASE + DRM_I810_OV0INFO, drm_i810_overlay_t)
+#define DRM_IOCTL_I810_FSTATUS		DRM_IO ( DRM_COMMAND_BASE + DRM_I810_FSTATUS)
+#define DRM_IOCTL_I810_OV0FLIP		DRM_IO ( DRM_COMMAND_BASE + DRM_I810_OV0FLIP)
+#define DRM_IOCTL_I810_MC		DRM_IOW( DRM_COMMAND_BASE + DRM_I810_MC, drm_i810_mc_t)
+#define DRM_IOCTL_I810_RSTATUS		DRM_IO ( DRM_COMMAND_BASE + DRM_I810_RSTATUS)
+#define DRM_IOCTL_I810_FLIP             DRM_IO ( DRM_COMMAND_BASE + DRM_I810_FLIP)
+
+typedef struct _drm_i810_clear {
+	int clear_color;
+	int clear_depth;
+	int flags;
+} drm_i810_clear_t;
+
+/* These may be placeholders if we have more cliprects than
+ * I810_NR_SAREA_CLIPRECTS.  In that case, the client sets discard to
+ * false, indicating that the buffer will be dispatched again with a
+ * new set of cliprects.
+ */
+typedef struct _drm_i810_vertex {
+	int idx;		/* buffer index */
+	int used;		/* nr bytes in use */
+	int discard;		/* client is finished with the buffer? */
+} drm_i810_vertex_t;
+
+typedef struct _drm_i810_copy_t {
+	int idx;		/* buffer index */
+	int used;		/* nr bytes in use */
+	void *address;		/* Address to copy from */
+} drm_i810_copy_t;
+
+#define PR_TRIANGLES         (0x0<<18)
+#define PR_TRISTRIP_0        (0x1<<18)
+#define PR_TRISTRIP_1        (0x2<<18)
+#define PR_TRIFAN            (0x3<<18)
+#define PR_POLYGON           (0x4<<18)
+#define PR_LINES             (0x5<<18)
+#define PR_LINESTRIP         (0x6<<18)
+#define PR_RECTS             (0x7<<18)
+#define PR_MASK              (0x7<<18)
+
+typedef struct drm_i810_dma {
+	void *virtual;
+	int request_idx;
+	int request_size;
+	int granted;
+} drm_i810_dma_t;
+
+typedef struct _drm_i810_overlay_t {
+	unsigned int offset;	/* Address of the Overlay Regs */
+	unsigned int physical;
+} drm_i810_overlay_t;
+
+typedef struct _drm_i810_mc {
+	int idx;		/* buffer index */
+	int used;		/* nr bytes in use */
+	int num_blocks;		/* number of GFXBlocks */
+	int *length;		/* List of lengths for GFXBlocks (FUTURE) */
+	unsigned int last_render;	/* Last Render Request */
+} drm_i810_mc_t;
+
+#endif				/* _I810_DRM_H_ */
diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h
new file mode 100644
index 00000000..da929bb5
--- /dev/null
+++ b/include/drm/i915_drm.h
@@ -0,0 +1,888 @@
+/*
+ * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
+ * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
+ * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifndef _I915_DRM_H_
+#define _I915_DRM_H_
+
+#include "drm.h"
+
+/* Please note that modifications to all structs defined here are
+ * subject to backwards-compatibility constraints.
+ */
+
+#ifdef __KERNEL__
+/* For use by IPS driver */
+extern unsigned long i915_read_mch_val(void);
+extern bool i915_gpu_raise(void);
+extern bool i915_gpu_lower(void);
+extern bool i915_gpu_busy(void);
+extern bool i915_gpu_turbo_disable(void);
+#endif
+
+/* Each region is a minimum of 16k, and there are at most 255 of them.
+ */
+#define I915_NR_TEX_REGIONS 255	/* table size 2k - maximum due to use
+				 * of chars for next/prev indices */
+#define I915_LOG_MIN_TEX_REGION_SIZE 14
+
+typedef struct _drm_i915_init {
+	enum {
+		I915_INIT_DMA = 0x01,
+		I915_CLEANUP_DMA = 0x02,
+		I915_RESUME_DMA = 0x03
+	} func;
+	unsigned int mmio_offset;
+	int sarea_priv_offset;
+	unsigned int ring_start;
+	unsigned int ring_end;
+	unsigned int ring_size;
+	unsigned int front_offset;
+	unsigned int back_offset;
+	unsigned int depth_offset;
+	unsigned int w;
+	unsigned int h;
+	unsigned int pitch;
+	unsigned int pitch_bits;
+	unsigned int back_pitch;
+	unsigned int depth_pitch;
+	unsigned int cpp;
+	unsigned int chipset;
+} drm_i915_init_t;
+
+typedef struct _drm_i915_sarea {
+	struct drm_tex_region texList[I915_NR_TEX_REGIONS + 1];
+	int last_upload;	/* last time texture was uploaded */
+	int last_enqueue;	/* last time a buffer was enqueued */
+	int last_dispatch;	/* age of the most recently dispatched buffer */
+	int ctxOwner;		/* last context to upload state */
+	int texAge;
+	int pf_enabled;		/* is pageflipping allowed? */
+	int pf_active;
+	int pf_current_page;	/* which buffer is being displayed? */
+	int perf_boxes;		/* performance boxes to be displayed */
+	int width, height;      /* screen size in pixels */
+
+	drm_handle_t front_handle;
+	int front_offset;
+	int front_size;
+
+	drm_handle_t back_handle;
+	int back_offset;
+	int back_size;
+
+	drm_handle_t depth_handle;
+	int depth_offset;
+	int depth_size;
+
+	drm_handle_t tex_handle;
+	int tex_offset;
+	int tex_size;
+	int log_tex_granularity;
+	int pitch;
+	int rotation;           /* 0, 90, 180 or 270 */
+	int rotated_offset;
+	int rotated_size;
+	int rotated_pitch;
+	int virtualX, virtualY;
+
+	unsigned int front_tiled;
+	unsigned int back_tiled;
+	unsigned int depth_tiled;
+	unsigned int rotated_tiled;
+	unsigned int rotated2_tiled;
+
+	int pipeA_x;
+	int pipeA_y;
+	int pipeA_w;
+	int pipeA_h;
+	int pipeB_x;
+	int pipeB_y;
+	int pipeB_w;
+	int pipeB_h;
+
+	/* fill out some space for old userspace triple buffer */
+	drm_handle_t unused_handle;
+	__u32 unused1, unused2, unused3;
+
+	/* buffer object handles for static buffers. May change
+	 * over the lifetime of the client.
+	 */
+	__u32 front_bo_handle;
+	__u32 back_bo_handle;
+	__u32 unused_bo_handle;
+	__u32 depth_bo_handle;
+
+} drm_i915_sarea_t;
+
+/* due to userspace building against these headers we need some compat here */
+#define planeA_x pipeA_x
+#define planeA_y pipeA_y
+#define planeA_w pipeA_w
+#define planeA_h pipeA_h
+#define planeB_x pipeB_x
+#define planeB_y pipeB_y
+#define planeB_w pipeB_w
+#define planeB_h pipeB_h
+
+/* Flags for perf_boxes
+ */
+#define I915_BOX_RING_EMPTY    0x1
+#define I915_BOX_FLIP          0x2
+#define I915_BOX_WAIT          0x4
+#define I915_BOX_TEXTURE_LOAD  0x8
+#define I915_BOX_LOST_CONTEXT  0x10
+
+/* I915 specific ioctls
+ * The device specific ioctl range is 0x40 to 0x79.
+ */
+#define DRM_I915_INIT		0x00
+#define DRM_I915_FLUSH		0x01
+#define DRM_I915_FLIP		0x02
+#define DRM_I915_BATCHBUFFER	0x03
+#define DRM_I915_IRQ_EMIT	0x04
+#define DRM_I915_IRQ_WAIT	0x05
+#define DRM_I915_GETPARAM	0x06
+#define DRM_I915_SETPARAM	0x07
+#define DRM_I915_ALLOC		0x08
+#define DRM_I915_FREE		0x09
+#define DRM_I915_INIT_HEAP	0x0a
+#define DRM_I915_CMDBUFFER	0x0b
+#define DRM_I915_DESTROY_HEAP	0x0c
+#define DRM_I915_SET_VBLANK_PIPE	0x0d
+#define DRM_I915_GET_VBLANK_PIPE	0x0e
+#define DRM_I915_VBLANK_SWAP	0x0f
+#define DRM_I915_HWS_ADDR	0x11
+#define DRM_I915_GEM_INIT	0x13
+#define DRM_I915_GEM_EXECBUFFER	0x14
+#define DRM_I915_GEM_PIN	0x15
+#define DRM_I915_GEM_UNPIN	0x16
+#define DRM_I915_GEM_BUSY	0x17
+#define DRM_I915_GEM_THROTTLE	0x18
+#define DRM_I915_GEM_ENTERVT	0x19
+#define DRM_I915_GEM_LEAVEVT	0x1a
+#define DRM_I915_GEM_CREATE	0x1b
+#define DRM_I915_GEM_PREAD	0x1c
+#define DRM_I915_GEM_PWRITE	0x1d
+#define DRM_I915_GEM_MMAP	0x1e
+#define DRM_I915_GEM_SET_DOMAIN	0x1f
+#define DRM_I915_GEM_SW_FINISH	0x20
+#define DRM_I915_GEM_SET_TILING	0x21
+#define DRM_I915_GEM_GET_TILING	0x22
+#define DRM_I915_GEM_GET_APERTURE 0x23
+#define DRM_I915_GEM_MMAP_GTT	0x24
+#define DRM_I915_GET_PIPE_FROM_CRTC_ID	0x25
+#define DRM_I915_GEM_MADVISE	0x26
+#define DRM_I915_OVERLAY_PUT_IMAGE	0x27
+#define DRM_I915_OVERLAY_ATTRS	0x28
+#define DRM_I915_GEM_EXECBUFFER2	0x29
+#define DRM_I915_GET_SPRITE_COLORKEY	0x2a
+#define DRM_I915_SET_SPRITE_COLORKEY	0x2b
+
+#define DRM_IOCTL_I915_INIT		DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t)
+#define DRM_IOCTL_I915_FLUSH		DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH)
+#define DRM_IOCTL_I915_FLIP		DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLIP)
+#define DRM_IOCTL_I915_BATCHBUFFER	DRM_IOW( DRM_COMMAND_BASE + DRM_I915_BATCHBUFFER, drm_i915_batchbuffer_t)
+#define DRM_IOCTL_I915_IRQ_EMIT         DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_IRQ_EMIT, drm_i915_irq_emit_t)
+#define DRM_IOCTL_I915_IRQ_WAIT         DRM_IOW( DRM_COMMAND_BASE + DRM_I915_IRQ_WAIT, drm_i915_irq_wait_t)
+#define DRM_IOCTL_I915_GETPARAM         DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GETPARAM, drm_i915_getparam_t)
+#define DRM_IOCTL_I915_SETPARAM         DRM_IOW( DRM_COMMAND_BASE + DRM_I915_SETPARAM, drm_i915_setparam_t)
+#define DRM_IOCTL_I915_ALLOC            DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_ALLOC, drm_i915_mem_alloc_t)
+#define DRM_IOCTL_I915_FREE             DRM_IOW( DRM_COMMAND_BASE + DRM_I915_FREE, drm_i915_mem_free_t)
+#define DRM_IOCTL_I915_INIT_HEAP        DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT_HEAP, drm_i915_mem_init_heap_t)
+#define DRM_IOCTL_I915_CMDBUFFER	DRM_IOW( DRM_COMMAND_BASE + DRM_I915_CMDBUFFER, drm_i915_cmdbuffer_t)
+#define DRM_IOCTL_I915_DESTROY_HEAP	DRM_IOW( DRM_COMMAND_BASE + DRM_I915_DESTROY_HEAP, drm_i915_mem_destroy_heap_t)
+#define DRM_IOCTL_I915_SET_VBLANK_PIPE	DRM_IOW( DRM_COMMAND_BASE + DRM_I915_SET_VBLANK_PIPE, drm_i915_vblank_pipe_t)
+#define DRM_IOCTL_I915_GET_VBLANK_PIPE	DRM_IOR( DRM_COMMAND_BASE + DRM_I915_GET_VBLANK_PIPE, drm_i915_vblank_pipe_t)
+#define DRM_IOCTL_I915_VBLANK_SWAP	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_VBLANK_SWAP, drm_i915_vblank_swap_t)
+#define DRM_IOCTL_I915_HWS_ADDR		DRM_IOW(DRM_COMMAND_BASE + DRM_I915_HWS_ADDR, struct drm_i915_gem_init)
+#define DRM_IOCTL_I915_GEM_INIT		DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_INIT, struct drm_i915_gem_init)
+#define DRM_IOCTL_I915_GEM_EXECBUFFER	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER, struct drm_i915_gem_execbuffer)
+#define DRM_IOCTL_I915_GEM_EXECBUFFER2	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER2, struct drm_i915_gem_execbuffer2)
+#define DRM_IOCTL_I915_GEM_PIN		DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_PIN, struct drm_i915_gem_pin)
+#define DRM_IOCTL_I915_GEM_UNPIN	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_UNPIN, struct drm_i915_gem_unpin)
+#define DRM_IOCTL_I915_GEM_BUSY		DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_BUSY, struct drm_i915_gem_busy)
+#define DRM_IOCTL_I915_GEM_THROTTLE	DRM_IO ( DRM_COMMAND_BASE + DRM_I915_GEM_THROTTLE)
+#define DRM_IOCTL_I915_GEM_ENTERVT	DRM_IO(DRM_COMMAND_BASE + DRM_I915_GEM_ENTERVT)
+#define DRM_IOCTL_I915_GEM_LEAVEVT	DRM_IO(DRM_COMMAND_BASE + DRM_I915_GEM_LEAVEVT)
+#define DRM_IOCTL_I915_GEM_CREATE	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_CREATE, struct drm_i915_gem_create)
+#define DRM_IOCTL_I915_GEM_PREAD	DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_PREAD, struct drm_i915_gem_pread)
+#define DRM_IOCTL_I915_GEM_PWRITE	DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_PWRITE, struct drm_i915_gem_pwrite)
+#define DRM_IOCTL_I915_GEM_MMAP		DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_MMAP, struct drm_i915_gem_mmap)
+#define DRM_IOCTL_I915_GEM_MMAP_GTT	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_MMAP_GTT, struct drm_i915_gem_mmap_gtt)
+#define DRM_IOCTL_I915_GEM_SET_DOMAIN	DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_SET_DOMAIN, struct drm_i915_gem_set_domain)
+#define DRM_IOCTL_I915_GEM_SW_FINISH	DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_SW_FINISH, struct drm_i915_gem_sw_finish)
+#define DRM_IOCTL_I915_GEM_SET_TILING	DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_SET_TILING, struct drm_i915_gem_set_tiling)
+#define DRM_IOCTL_I915_GEM_GET_TILING	DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_GET_TILING, struct drm_i915_gem_get_tiling)
+#define DRM_IOCTL_I915_GEM_GET_APERTURE	DRM_IOR  (DRM_COMMAND_BASE + DRM_I915_GEM_GET_APERTURE, struct drm_i915_gem_get_aperture)
+#define DRM_IOCTL_I915_GET_PIPE_FROM_CRTC_ID DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GET_PIPE_FROM_CRTC_ID, struct drm_i915_get_pipe_from_crtc_id)
+#define DRM_IOCTL_I915_GEM_MADVISE	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_MADVISE, struct drm_i915_gem_madvise)
+#define DRM_IOCTL_I915_OVERLAY_PUT_IMAGE	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_OVERLAY_PUT_IMAGE, struct drm_intel_overlay_put_image)
+#define DRM_IOCTL_I915_OVERLAY_ATTRS	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_OVERLAY_ATTRS, struct drm_intel_overlay_attrs)
+#define DRM_IOCTL_I915_SET_SPRITE_COLORKEY DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_SET_SPRITE_COLORKEY, struct drm_intel_sprite_colorkey)
+#define DRM_IOCTL_I915_GET_SPRITE_COLORKEY DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_SET_SPRITE_COLORKEY, struct drm_intel_sprite_colorkey)
+
+/* Allow drivers to submit batchbuffers directly to hardware, relying
+ * on the security mechanisms provided by hardware.
+ */
+typedef struct drm_i915_batchbuffer {
+	int start;		/* agp offset */
+	int used;		/* nr bytes in use */
+	int DR1;		/* hw flags for GFX_OP_DRAWRECT_INFO */
+	int DR4;		/* window origin for GFX_OP_DRAWRECT_INFO */
+	int num_cliprects;	/* mulitpass with multiple cliprects? */
+	struct drm_clip_rect __user *cliprects;	/* pointer to userspace cliprects */
+} drm_i915_batchbuffer_t;
+
+/* As above, but pass a pointer to userspace buffer which can be
+ * validated by the kernel prior to sending to hardware.
+ */
+typedef struct _drm_i915_cmdbuffer {
+	char __user *buf;	/* pointer to userspace command buffer */
+	int sz;			/* nr bytes in buf */
+	int DR1;		/* hw flags for GFX_OP_DRAWRECT_INFO */
+	int DR4;		/* window origin for GFX_OP_DRAWRECT_INFO */
+	int num_cliprects;	/* mulitpass with multiple cliprects? */
+	struct drm_clip_rect __user *cliprects;	/* pointer to userspace cliprects */
+} drm_i915_cmdbuffer_t;
+
+/* Userspace can request & wait on irq's:
+ */
+typedef struct drm_i915_irq_emit {
+	int __user *irq_seq;
+} drm_i915_irq_emit_t;
+
+typedef struct drm_i915_irq_wait {
+	int irq_seq;
+} drm_i915_irq_wait_t;
+
+/* Ioctl to query kernel params:
+ */
+#define I915_PARAM_IRQ_ACTIVE            1
+#define I915_PARAM_ALLOW_BATCHBUFFER     2
+#define I915_PARAM_LAST_DISPATCH         3
+#define I915_PARAM_CHIPSET_ID            4
+#define I915_PARAM_HAS_GEM               5
+#define I915_PARAM_NUM_FENCES_AVAIL      6
+#define I915_PARAM_HAS_OVERLAY           7
+#define I915_PARAM_HAS_PAGEFLIPPING	 8
+#define I915_PARAM_HAS_EXECBUF2          9
+#define I915_PARAM_HAS_BSD		 10
+#define I915_PARAM_HAS_BLT		 11
+#define I915_PARAM_HAS_RELAXED_FENCING	 12
+#define I915_PARAM_HAS_COHERENT_RINGS	 13
+#define I915_PARAM_HAS_EXEC_CONSTANTS	 14
+#define I915_PARAM_HAS_RELAXED_DELTA	 15
+#define I915_PARAM_HAS_GEN7_SOL_RESET	 16
+#define I915_PARAM_HAS_LLC     	 17
+
+typedef struct drm_i915_getparam {
+	int param;
+	int __user *value;
+} drm_i915_getparam_t;
+
+/* Ioctl to set kernel params:
+ */
+#define I915_SETPARAM_USE_MI_BATCHBUFFER_START            1
+#define I915_SETPARAM_TEX_LRU_LOG_GRANULARITY             2
+#define I915_SETPARAM_ALLOW_BATCHBUFFER                   3
+#define I915_SETPARAM_NUM_USED_FENCES                     4
+
+typedef struct drm_i915_setparam {
+	int param;
+	int value;
+} drm_i915_setparam_t;
+
+/* A memory manager for regions of shared memory:
+ */
+#define I915_MEM_REGION_AGP 1
+
+typedef struct drm_i915_mem_alloc {
+	int region;
+	int alignment;
+	int size;
+	int __user *region_offset;	/* offset from start of fb or agp */
+} drm_i915_mem_alloc_t;
+
+typedef struct drm_i915_mem_free {
+	int region;
+	int region_offset;
+} drm_i915_mem_free_t;
+
+typedef struct drm_i915_mem_init_heap {
+	int region;
+	int size;
+	int start;
+} drm_i915_mem_init_heap_t;
+
+/* Allow memory manager to be torn down and re-initialized (eg on
+ * rotate):
+ */
+typedef struct drm_i915_mem_destroy_heap {
+	int region;
+} drm_i915_mem_destroy_heap_t;
+
+/* Allow X server to configure which pipes to monitor for vblank signals
+ */
+#define	DRM_I915_VBLANK_PIPE_A	1
+#define	DRM_I915_VBLANK_PIPE_B	2
+
+typedef struct drm_i915_vblank_pipe {
+	int pipe;
+} drm_i915_vblank_pipe_t;
+
+/* Schedule buffer swap at given vertical blank:
+ */
+typedef struct drm_i915_vblank_swap {
+	drm_drawable_t drawable;
+	enum drm_vblank_seq_type seqtype;
+	unsigned int sequence;
+} drm_i915_vblank_swap_t;
+
+typedef struct drm_i915_hws_addr {
+	__u64 addr;
+} drm_i915_hws_addr_t;
+
+struct drm_i915_gem_init {
+	/**
+	 * Beginning offset in the GTT to be managed by the DRM memory
+	 * manager.
+	 */
+	__u64 gtt_start;
+	/**
+	 * Ending offset in the GTT to be managed by the DRM memory
+	 * manager.
+	 */
+	__u64 gtt_end;
+};
+
+struct drm_i915_gem_create {
+	/**
+	 * Requested size for the object.
+	 *
+	 * The (page-aligned) allocated size for the object will be returned.
+	 */
+	__u64 size;
+	/**
+	 * Returned handle for the object.
+	 *
+	 * Object handles are nonzero.
+	 */
+	__u32 handle;
+	__u32 pad;
+};
+
+struct drm_i915_gem_pread {
+	/** Handle for the object being read. */
+	__u32 handle;
+	__u32 pad;
+	/** Offset into the object to read from */
+	__u64 offset;
+	/** Length of data to read */
+	__u64 size;
+	/**
+	 * Pointer to write the data into.
+	 *
+	 * This is a fixed-size type for 32/64 compatibility.
+	 */
+	__u64 data_ptr;
+};
+
+struct drm_i915_gem_pwrite {
+	/** Handle for the object being written to. */
+	__u32 handle;
+	__u32 pad;
+	/** Offset into the object to write to */
+	__u64 offset;
+	/** Length of data to write */
+	__u64 size;
+	/**
+	 * Pointer to read the data from.
+	 *
+	 * This is a fixed-size type for 32/64 compatibility.
+	 */
+	__u64 data_ptr;
+};
+
+struct drm_i915_gem_mmap {
+	/** Handle for the object being mapped. */
+	__u32 handle;
+	__u32 pad;
+	/** Offset in the object to map. */
+	__u64 offset;
+	/**
+	 * Length of data to map.
+	 *
+	 * The value will be page-aligned.
+	 */
+	__u64 size;
+	/**
+	 * Returned pointer the data was mapped at.
+	 *
+	 * This is a fixed-size type for 32/64 compatibility.
+	 */
+	__u64 addr_ptr;
+};
+
+struct drm_i915_gem_mmap_gtt {
+	/** Handle for the object being mapped. */
+	__u32 handle;
+	__u32 pad;
+	/**
+	 * Fake offset to use for subsequent mmap call
+	 *
+	 * This is a fixed-size type for 32/64 compatibility.
+	 */
+	__u64 offset;
+};
+
+struct drm_i915_gem_set_domain {
+	/** Handle for the object */
+	__u32 handle;
+
+	/** New read domains */
+	__u32 read_domains;
+
+	/** New write domain */
+	__u32 write_domain;
+};
+
+struct drm_i915_gem_sw_finish {
+	/** Handle for the object */
+	__u32 handle;
+};
+
+struct drm_i915_gem_relocation_entry {
+	/**
+	 * Handle of the buffer being pointed to by this relocation entry.
+	 *
+	 * It's appealing to make this be an index into the mm_validate_entry
+	 * list to refer to the buffer, but this allows the driver to create
+	 * a relocation list for state buffers and not re-write it per
+	 * exec using the buffer.
+	 */
+	__u32 target_handle;
+
+	/**
+	 * Value to be added to the offset of the target buffer to make up
+	 * the relocation entry.
+	 */
+	__u32 delta;
+
+	/** Offset in the buffer the relocation entry will be written into */
+	__u64 offset;
+
+	/**
+	 * Offset value of the target buffer that the relocation entry was last
+	 * written as.
+	 *
+	 * If the buffer has the same offset as last time, we can skip syncing
+	 * and writing the relocation.  This value is written back out by
+	 * the execbuffer ioctl when the relocation is written.
+	 */
+	__u64 presumed_offset;
+
+	/**
+	 * Target memory domains read by this operation.
+	 */
+	__u32 read_domains;
+
+	/**
+	 * Target memory domains written by this operation.
+	 *
+	 * Note that only one domain may be written by the whole
+	 * execbuffer operation, so that where there are conflicts,
+	 * the application will get -EINVAL back.
+	 */
+	__u32 write_domain;
+};
+
+/** @{
+ * Intel memory domains
+ *
+ * Most of these just align with the various caches in
+ * the system and are used to flush and invalidate as
+ * objects end up cached in different domains.
+ */
+/** CPU cache */
+#define I915_GEM_DOMAIN_CPU		0x00000001
+/** Render cache, used by 2D and 3D drawing */
+#define I915_GEM_DOMAIN_RENDER		0x00000002
+/** Sampler cache, used by texture engine */
+#define I915_GEM_DOMAIN_SAMPLER		0x00000004
+/** Command queue, used to load batch buffers */
+#define I915_GEM_DOMAIN_COMMAND		0x00000008
+/** Instruction cache, used by shader programs */
+#define I915_GEM_DOMAIN_INSTRUCTION	0x00000010
+/** Vertex address cache */
+#define I915_GEM_DOMAIN_VERTEX		0x00000020
+/** GTT domain - aperture and scanout */
+#define I915_GEM_DOMAIN_GTT		0x00000040
+/** @} */
+
+struct drm_i915_gem_exec_object {
+	/**
+	 * User's handle for a buffer to be bound into the GTT for this
+	 * operation.
+	 */
+	__u32 handle;
+
+	/** Number of relocations to be performed on this buffer */
+	__u32 relocation_count;
+	/**
+	 * Pointer to array of struct drm_i915_gem_relocation_entry containing
+	 * the relocations to be performed in this buffer.
+	 */
+	__u64 relocs_ptr;
+
+	/** Required alignment in graphics aperture */
+	__u64 alignment;
+
+	/**
+	 * Returned value of the updated offset of the object, for future
+	 * presumed_offset writes.
+	 */
+	__u64 offset;
+};
+
+struct drm_i915_gem_execbuffer {
+	/**
+	 * List of buffers to be validated with their relocations to be
+	 * performend on them.
+	 *
+	 * This is a pointer to an array of struct drm_i915_gem_validate_entry.
+	 *
+	 * These buffers must be listed in an order such that all relocations
+	 * a buffer is performing refer to buffers that have already appeared
+	 * in the validate list.
+	 */
+	__u64 buffers_ptr;
+	__u32 buffer_count;
+
+	/** Offset in the batchbuffer to start execution from. */
+	__u32 batch_start_offset;
+	/** Bytes used in batchbuffer from batch_start_offset */
+	__u32 batch_len;
+	__u32 DR1;
+	__u32 DR4;
+	__u32 num_cliprects;
+	/** This is a struct drm_clip_rect *cliprects */
+	__u64 cliprects_ptr;
+};
+
+struct drm_i915_gem_exec_object2 {
+	/**
+	 * User's handle for a buffer to be bound into the GTT for this
+	 * operation.
+	 */
+	__u32 handle;
+
+	/** Number of relocations to be performed on this buffer */
+	__u32 relocation_count;
+	/**
+	 * Pointer to array of struct drm_i915_gem_relocation_entry containing
+	 * the relocations to be performed in this buffer.
+	 */
+	__u64 relocs_ptr;
+
+	/** Required alignment in graphics aperture */
+	__u64 alignment;
+
+	/**
+	 * Returned value of the updated offset of the object, for future
+	 * presumed_offset writes.
+	 */
+	__u64 offset;
+
+#define EXEC_OBJECT_NEEDS_FENCE (1<<0)
+	__u64 flags;
+	__u64 rsvd1;
+	__u64 rsvd2;
+};
+
+struct drm_i915_gem_execbuffer2 {
+	/**
+	 * List of gem_exec_object2 structs
+	 */
+	__u64 buffers_ptr;
+	__u32 buffer_count;
+
+	/** Offset in the batchbuffer to start execution from. */
+	__u32 batch_start_offset;
+	/** Bytes used in batchbuffer from batch_start_offset */
+	__u32 batch_len;
+	__u32 DR1;
+	__u32 DR4;
+	__u32 num_cliprects;
+	/** This is a struct drm_clip_rect *cliprects */
+	__u64 cliprects_ptr;
+#define I915_EXEC_RING_MASK              (7<<0)
+#define I915_EXEC_DEFAULT                (0<<0)
+#define I915_EXEC_RENDER                 (1<<0)
+#define I915_EXEC_BSD                    (2<<0)
+#define I915_EXEC_BLT                    (3<<0)
+
+/* Used for switching the constants addressing mode on gen4+ RENDER ring.
+ * Gen6+ only supports relative addressing to dynamic state (default) and
+ * absolute addressing.
+ *
+ * These flags are ignored for the BSD and BLT rings.
+ */
+#define I915_EXEC_CONSTANTS_MASK 	(3<<6)
+#define I915_EXEC_CONSTANTS_REL_GENERAL (0<<6) /* default */
+#define I915_EXEC_CONSTANTS_ABSOLUTE 	(1<<6)
+#define I915_EXEC_CONSTANTS_REL_SURFACE (2<<6) /* gen4/5 only */
+	__u64 flags;
+	__u64 rsvd1;
+	__u64 rsvd2;
+};
+
+/** Resets the SO write offset registers for transform feedback on gen7. */
+#define I915_EXEC_GEN7_SOL_RESET	(1<<8)
+
+struct drm_i915_gem_pin {
+	/** Handle of the buffer to be pinned. */
+	__u32 handle;
+	__u32 pad;
+
+	/** alignment required within the aperture */
+	__u64 alignment;
+
+	/** Returned GTT offset of the buffer. */
+	__u64 offset;
+};
+
+struct drm_i915_gem_unpin {
+	/** Handle of the buffer to be unpinned. */
+	__u32 handle;
+	__u32 pad;
+};
+
+struct drm_i915_gem_busy {
+	/** Handle of the buffer to check for busy */
+	__u32 handle;
+
+	/** Return busy status (1 if busy, 0 if idle) */
+	__u32 busy;
+};
+
+#define I915_TILING_NONE	0
+#define I915_TILING_X		1
+#define I915_TILING_Y		2
+
+#define I915_BIT_6_SWIZZLE_NONE		0
+#define I915_BIT_6_SWIZZLE_9		1
+#define I915_BIT_6_SWIZZLE_9_10		2
+#define I915_BIT_6_SWIZZLE_9_11		3
+#define I915_BIT_6_SWIZZLE_9_10_11	4
+/* Not seen by userland */
+#define I915_BIT_6_SWIZZLE_UNKNOWN	5
+/* Seen by userland. */
+#define I915_BIT_6_SWIZZLE_9_17		6
+#define I915_BIT_6_SWIZZLE_9_10_17	7
+
+struct drm_i915_gem_set_tiling {
+	/** Handle of the buffer to have its tiling state updated */
+	__u32 handle;
+
+	/**
+	 * Tiling mode for the object (I915_TILING_NONE, I915_TILING_X,
+	 * I915_TILING_Y).
+	 *
+	 * This value is to be set on request, and will be updated by the
+	 * kernel on successful return with the actual chosen tiling layout.
+	 *
+	 * The tiling mode may be demoted to I915_TILING_NONE when the system
+	 * has bit 6 swizzling that can't be managed correctly by GEM.
+	 *
+	 * Buffer contents become undefined when changing tiling_mode.
+	 */
+	__u32 tiling_mode;
+
+	/**
+	 * Stride in bytes for the object when in I915_TILING_X or
+	 * I915_TILING_Y.
+	 */
+	__u32 stride;
+
+	/**
+	 * Returned address bit 6 swizzling required for CPU access through
+	 * mmap mapping.
+	 */
+	__u32 swizzle_mode;
+};
+
+struct drm_i915_gem_get_tiling {
+	/** Handle of the buffer to get tiling state for. */
+	__u32 handle;
+
+	/**
+	 * Current tiling mode for the object (I915_TILING_NONE, I915_TILING_X,
+	 * I915_TILING_Y).
+	 */
+	__u32 tiling_mode;
+
+	/**
+	 * Returned address bit 6 swizzling required for CPU access through
+	 * mmap mapping.
+	 */
+	__u32 swizzle_mode;
+};
+
+struct drm_i915_gem_get_aperture {
+	/** Total size of the aperture used by i915_gem_execbuffer, in bytes */
+	__u64 aper_size;
+
+	/**
+	 * Available space in the aperture used by i915_gem_execbuffer, in
+	 * bytes
+	 */
+	__u64 aper_available_size;
+};
+
+struct drm_i915_get_pipe_from_crtc_id {
+	/** ID of CRTC being requested **/
+	__u32 crtc_id;
+
+	/** pipe of requested CRTC **/
+	__u32 pipe;
+};
+
+#define I915_MADV_WILLNEED 0
+#define I915_MADV_DONTNEED 1
+#define __I915_MADV_PURGED 2 /* internal state */
+
+struct drm_i915_gem_madvise {
+	/** Handle of the buffer to change the backing store advice */
+	__u32 handle;
+
+	/* Advice: either the buffer will be needed again in the near future,
+	 *         or wont be and could be discarded under memory pressure.
+	 */
+	__u32 madv;
+
+	/** Whether the backing store still exists. */
+	__u32 retained;
+};
+
+/* flags */
+#define I915_OVERLAY_TYPE_MASK 		0xff
+#define I915_OVERLAY_YUV_PLANAR 	0x01
+#define I915_OVERLAY_YUV_PACKED 	0x02
+#define I915_OVERLAY_RGB		0x03
+
+#define I915_OVERLAY_DEPTH_MASK		0xff00
+#define I915_OVERLAY_RGB24		0x1000
+#define I915_OVERLAY_RGB16		0x2000
+#define I915_OVERLAY_RGB15		0x3000
+#define I915_OVERLAY_YUV422		0x0100
+#define I915_OVERLAY_YUV411		0x0200
+#define I915_OVERLAY_YUV420		0x0300
+#define I915_OVERLAY_YUV410		0x0400
+
+#define I915_OVERLAY_SWAP_MASK		0xff0000
+#define I915_OVERLAY_NO_SWAP		0x000000
+#define I915_OVERLAY_UV_SWAP		0x010000
+#define I915_OVERLAY_Y_SWAP		0x020000
+#define I915_OVERLAY_Y_AND_UV_SWAP	0x030000
+
+#define I915_OVERLAY_FLAGS_MASK		0xff000000
+#define I915_OVERLAY_ENABLE		0x01000000
+
+struct drm_intel_overlay_put_image {
+	/* various flags and src format description */
+	__u32 flags;
+	/* source picture description */
+	__u32 bo_handle;
+	/* stride values and offsets are in bytes, buffer relative */
+	__u16 stride_Y; /* stride for packed formats */
+	__u16 stride_UV;
+	__u32 offset_Y; /* offset for packet formats */
+	__u32 offset_U;
+	__u32 offset_V;
+	/* in pixels */
+	__u16 src_width;
+	__u16 src_height;
+	/* to compensate the scaling factors for partially covered surfaces */
+	__u16 src_scan_width;
+	__u16 src_scan_height;
+	/* output crtc description */
+	__u32 crtc_id;
+	__u16 dst_x;
+	__u16 dst_y;
+	__u16 dst_width;
+	__u16 dst_height;
+};
+
+/* flags */
+#define I915_OVERLAY_UPDATE_ATTRS	(1<<0)
+#define I915_OVERLAY_UPDATE_GAMMA	(1<<1)
+struct drm_intel_overlay_attrs {
+	__u32 flags;
+	__u32 color_key;
+	__s32 brightness;
+	__u32 contrast;
+	__u32 saturation;
+	__u32 gamma0;
+	__u32 gamma1;
+	__u32 gamma2;
+	__u32 gamma3;
+	__u32 gamma4;
+	__u32 gamma5;
+};
+
+/*
+ * Intel sprite handling
+ *
+ * Color keying works with a min/mask/max tuple.  Both source and destination
+ * color keying is allowed.
+ *
+ * Source keying:
+ * Sprite pixels within the min & max values, masked against the color channels
+ * specified in the mask field, will be transparent.  All other pixels will
+ * be displayed on top of the primary plane.  For RGB surfaces, only the min
+ * and mask fields will be used; ranged compares are not allowed.
+ *
+ * Destination keying:
+ * Primary plane pixels that match the min value, masked against the color
+ * channels specified in the mask field, will be replaced by corresponding
+ * pixels from the sprite plane.
+ *
+ * Note that source & destination keying are exclusive; only one can be
+ * active on a given plane.
+ */
+
+#define I915_SET_COLORKEY_NONE		(1<<0) /* disable color key matching */
+#define I915_SET_COLORKEY_DESTINATION	(1<<1)
+#define I915_SET_COLORKEY_SOURCE	(1<<2)
+struct drm_intel_sprite_colorkey {
+	__u32 plane_id;
+	__u32 min_value;
+	__u32 channel_mask;
+	__u32 max_value;
+	__u32 flags;
+};
+
+#endif				/* _I915_DRM_H_ */
diff --git a/include/drm/intel-gtt.h b/include/drm/intel-gtt.h
new file mode 100644
index 00000000..923afb5d
--- /dev/null
+++ b/include/drm/intel-gtt.h
@@ -0,0 +1,51 @@
+/* Common header for intel-gtt.ko and i915.ko */
+
+#ifndef _DRM_INTEL_GTT_H
+#define	_DRM_INTEL_GTT_H
+
+const struct intel_gtt {
+	/* Size of memory reserved for graphics by the BIOS */
+	unsigned int stolen_size;
+	/* Total number of gtt entries. */
+	unsigned int gtt_total_entries;
+	/* Part of the gtt that is mappable by the cpu, for those chips where
+	 * this is not the full gtt. */
+	unsigned int gtt_mappable_entries;
+	/* Whether i915 needs to use the dmar apis or not. */
+	unsigned int needs_dmar : 1;
+	/* Whether we idle the gpu before mapping/unmapping */
+	unsigned int do_idle_maps : 1;
+	/* Share the scratch page dma with ppgtts. */
+	dma_addr_t scratch_page_dma;
+	/* for ppgtt PDE access */
+	u32 __iomem *gtt;
+} *intel_gtt_get(void);
+
+void intel_gtt_chipset_flush(void);
+void intel_gtt_unmap_memory(struct scatterlist *sg_list, int num_sg);
+void intel_gtt_clear_range(unsigned int first_entry, unsigned int num_entries);
+int intel_gtt_map_memory(struct page **pages, unsigned int num_entries,
+			 struct scatterlist **sg_list, int *num_sg);
+void intel_gtt_insert_sg_entries(struct scatterlist *sg_list,
+				 unsigned int sg_len,
+				 unsigned int pg_start,
+				 unsigned int flags);
+void intel_gtt_insert_pages(unsigned int first_entry, unsigned int num_entries,
+			    struct page **pages, unsigned int flags);
+
+/* Special gtt memory types */
+#define AGP_DCACHE_MEMORY	1
+#define AGP_PHYS_MEMORY		2
+
+/* New caching attributes for gen6/sandybridge */
+#define AGP_USER_CACHED_MEMORY_LLC_MLC (AGP_USER_TYPES + 2)
+#define AGP_USER_UNCACHED_MEMORY (AGP_USER_TYPES + 4)
+
+/* flag for GFDT type */
+#define AGP_USER_CACHED_MEMORY_GFDT (1 << 3)
+
+#ifdef CONFIG_INTEL_IOMMU
+extern int intel_iommu_gfx_mapped;
+#endif
+
+#endif
diff --git a/include/drm/mga_drm.h b/include/drm/mga_drm.h
new file mode 100644
index 00000000..fca81700
--- /dev/null
+++ b/include/drm/mga_drm.h
@@ -0,0 +1,419 @@
+/* mga_drm.h -- Public header for the Matrox g200/g400 driver -*- linux-c -*-
+ * Created: Tue Jan 25 01:50:01 1999 by jhartmann@precisioninsight.com
+ *
+ * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas.
+ * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
+ * All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Jeff Hartmann <jhartmann@valinux.com>
+ *    Keith Whitwell <keith@tungstengraphics.com>
+ *
+ * Rewritten by:
+ *    Gareth Hughes <gareth@valinux.com>
+ */
+
+#ifndef __MGA_DRM_H__
+#define __MGA_DRM_H__
+
+#include "drm.h"
+
+/* WARNING: If you change any of these defines, make sure to change the
+ * defines in the Xserver file (mga_sarea.h)
+ */
+
+#ifndef __MGA_SAREA_DEFINES__
+#define __MGA_SAREA_DEFINES__
+
+/* WARP pipe flags
+ */
+#define MGA_F			0x1	/* fog */
+#define MGA_A			0x2	/* alpha */
+#define MGA_S			0x4	/* specular */
+#define MGA_T2			0x8	/* multitexture */
+
+#define MGA_WARP_TGZ		0
+#define MGA_WARP_TGZF		(MGA_F)
+#define MGA_WARP_TGZA		(MGA_A)
+#define MGA_WARP_TGZAF		(MGA_F|MGA_A)
+#define MGA_WARP_TGZS		(MGA_S)
+#define MGA_WARP_TGZSF		(MGA_S|MGA_F)
+#define MGA_WARP_TGZSA		(MGA_S|MGA_A)
+#define MGA_WARP_TGZSAF		(MGA_S|MGA_F|MGA_A)
+#define MGA_WARP_T2GZ		(MGA_T2)
+#define MGA_WARP_T2GZF		(MGA_T2|MGA_F)
+#define MGA_WARP_T2GZA		(MGA_T2|MGA_A)
+#define MGA_WARP_T2GZAF		(MGA_T2|MGA_A|MGA_F)
+#define MGA_WARP_T2GZS		(MGA_T2|MGA_S)
+#define MGA_WARP_T2GZSF		(MGA_T2|MGA_S|MGA_F)
+#define MGA_WARP_T2GZSA		(MGA_T2|MGA_S|MGA_A)
+#define MGA_WARP_T2GZSAF	(MGA_T2|MGA_S|MGA_F|MGA_A)
+
+#define MGA_MAX_G200_PIPES	8	/* no multitex */
+#define MGA_MAX_G400_PIPES	16
+#define MGA_MAX_WARP_PIPES	MGA_MAX_G400_PIPES
+#define MGA_WARP_UCODE_SIZE	32768	/* in bytes */
+
+#define MGA_CARD_TYPE_G200	1
+#define MGA_CARD_TYPE_G400	2
+#define MGA_CARD_TYPE_G450	3	/* not currently used */
+#define MGA_CARD_TYPE_G550	4
+
+#define MGA_FRONT		0x1
+#define MGA_BACK		0x2
+#define MGA_DEPTH		0x4
+
+/* What needs to be changed for the current vertex dma buffer?
+ */
+#define MGA_UPLOAD_CONTEXT	0x1
+#define MGA_UPLOAD_TEX0		0x2
+#define MGA_UPLOAD_TEX1		0x4
+#define MGA_UPLOAD_PIPE		0x8
+#define MGA_UPLOAD_TEX0IMAGE	0x10	/* handled client-side */
+#define MGA_UPLOAD_TEX1IMAGE	0x20	/* handled client-side */
+#define MGA_UPLOAD_2D		0x40
+#define MGA_WAIT_AGE		0x80	/* handled client-side */
+#define MGA_UPLOAD_CLIPRECTS	0x100	/* handled client-side */
+#if 0
+#define MGA_DMA_FLUSH		0x200	/* set when someone gets the lock
+					   quiescent */
+#endif
+
+/* 32 buffers of 64k each, total 2 meg.
+ */
+#define MGA_BUFFER_SIZE		(1 << 16)
+#define MGA_NUM_BUFFERS		128
+
+/* Keep these small for testing.
+ */
+#define MGA_NR_SAREA_CLIPRECTS	8
+
+/* 2 heaps (1 for card, 1 for agp), each divided into up to 128
+ * regions, subject to a minimum region size of (1<<16) == 64k.
+ *
+ * Clients may subdivide regions internally, but when sharing between
+ * clients, the region size is the minimum granularity.
+ */
+
+#define MGA_CARD_HEAP			0
+#define MGA_AGP_HEAP			1
+#define MGA_NR_TEX_HEAPS		2
+#define MGA_NR_TEX_REGIONS		16
+#define MGA_LOG_MIN_TEX_REGION_SIZE	16
+
+#define  DRM_MGA_IDLE_RETRY          2048
+
+#endif				/* __MGA_SAREA_DEFINES__ */
+
+/* Setup registers for 3D context
+ */
+typedef struct {
+	unsigned int dstorg;
+	unsigned int maccess;
+	unsigned int plnwt;
+	unsigned int dwgctl;
+	unsigned int alphactrl;
+	unsigned int fogcolor;
+	unsigned int wflag;
+	unsigned int tdualstage0;
+	unsigned int tdualstage1;
+	unsigned int fcol;
+	unsigned int stencil;
+	unsigned int stencilctl;
+} drm_mga_context_regs_t;
+
+/* Setup registers for 2D, X server
+ */
+typedef struct {
+	unsigned int pitch;
+} drm_mga_server_regs_t;
+
+/* Setup registers for each texture unit
+ */
+typedef struct {
+	unsigned int texctl;
+	unsigned int texctl2;
+	unsigned int texfilter;
+	unsigned int texbordercol;
+	unsigned int texorg;
+	unsigned int texwidth;
+	unsigned int texheight;
+	unsigned int texorg1;
+	unsigned int texorg2;
+	unsigned int texorg3;
+	unsigned int texorg4;
+} drm_mga_texture_regs_t;
+
+/* General aging mechanism
+ */
+typedef struct {
+	unsigned int head;	/* Position of head pointer          */
+	unsigned int wrap;	/* Primary DMA wrap count            */
+} drm_mga_age_t;
+
+typedef struct _drm_mga_sarea {
+	/* The channel for communication of state information to the kernel
+	 * on firing a vertex dma buffer.
+	 */
+	drm_mga_context_regs_t context_state;
+	drm_mga_server_regs_t server_state;
+	drm_mga_texture_regs_t tex_state[2];
+	unsigned int warp_pipe;
+	unsigned int dirty;
+	unsigned int vertsize;
+
+	/* The current cliprects, or a subset thereof.
+	 */
+	struct drm_clip_rect boxes[MGA_NR_SAREA_CLIPRECTS];
+	unsigned int nbox;
+
+	/* Information about the most recently used 3d drawable.  The
+	 * client fills in the req_* fields, the server fills in the
+	 * exported_ fields and puts the cliprects into boxes, above.
+	 *
+	 * The client clears the exported_drawable field before
+	 * clobbering the boxes data.
+	 */
+	unsigned int req_drawable;	/* the X drawable id */
+	unsigned int req_draw_buffer;	/* MGA_FRONT or MGA_BACK */
+
+	unsigned int exported_drawable;
+	unsigned int exported_index;
+	unsigned int exported_stamp;
+	unsigned int exported_buffers;
+	unsigned int exported_nfront;
+	unsigned int exported_nback;
+	int exported_back_x, exported_front_x, exported_w;
+	int exported_back_y, exported_front_y, exported_h;
+	struct drm_clip_rect exported_boxes[MGA_NR_SAREA_CLIPRECTS];
+
+	/* Counters for aging textures and for client-side throttling.
+	 */
+	unsigned int status[4];
+	unsigned int last_wrap;
+
+	drm_mga_age_t last_frame;
+	unsigned int last_enqueue;	/* last time a buffer was enqueued */
+	unsigned int last_dispatch;	/* age of the most recently dispatched buffer */
+	unsigned int last_quiescent;	/*  */
+
+	/* LRU lists for texture memory in agp space and on the card.
+	 */
+	struct drm_tex_region texList[MGA_NR_TEX_HEAPS][MGA_NR_TEX_REGIONS + 1];
+	unsigned int texAge[MGA_NR_TEX_HEAPS];
+
+	/* Mechanism to validate card state.
+	 */
+	int ctxOwner;
+} drm_mga_sarea_t;
+
+/* MGA specific ioctls
+ * The device specific ioctl range is 0x40 to 0x79.
+ */
+#define DRM_MGA_INIT     0x00
+#define DRM_MGA_FLUSH    0x01
+#define DRM_MGA_RESET    0x02
+#define DRM_MGA_SWAP     0x03
+#define DRM_MGA_CLEAR    0x04
+#define DRM_MGA_VERTEX   0x05
+#define DRM_MGA_INDICES  0x06
+#define DRM_MGA_ILOAD    0x07
+#define DRM_MGA_BLIT     0x08
+#define DRM_MGA_GETPARAM 0x09
+
+/* 3.2:
+ * ioctls for operating on fences.
+ */
+#define DRM_MGA_SET_FENCE      0x0a
+#define DRM_MGA_WAIT_FENCE     0x0b
+#define DRM_MGA_DMA_BOOTSTRAP  0x0c
+
+#define DRM_IOCTL_MGA_INIT     DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_INIT, drm_mga_init_t)
+#define DRM_IOCTL_MGA_FLUSH    DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_FLUSH, struct drm_lock)
+#define DRM_IOCTL_MGA_RESET    DRM_IO(  DRM_COMMAND_BASE + DRM_MGA_RESET)
+#define DRM_IOCTL_MGA_SWAP     DRM_IO(  DRM_COMMAND_BASE + DRM_MGA_SWAP)
+#define DRM_IOCTL_MGA_CLEAR    DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_CLEAR, drm_mga_clear_t)
+#define DRM_IOCTL_MGA_VERTEX   DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_VERTEX, drm_mga_vertex_t)
+#define DRM_IOCTL_MGA_INDICES  DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_INDICES, drm_mga_indices_t)
+#define DRM_IOCTL_MGA_ILOAD    DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_ILOAD, drm_mga_iload_t)
+#define DRM_IOCTL_MGA_BLIT     DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_BLIT, drm_mga_blit_t)
+#define DRM_IOCTL_MGA_GETPARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_MGA_GETPARAM, drm_mga_getparam_t)
+#define DRM_IOCTL_MGA_SET_FENCE     DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_SET_FENCE, __u32)
+#define DRM_IOCTL_MGA_WAIT_FENCE    DRM_IOWR(DRM_COMMAND_BASE + DRM_MGA_WAIT_FENCE, __u32)
+#define DRM_IOCTL_MGA_DMA_BOOTSTRAP DRM_IOWR(DRM_COMMAND_BASE + DRM_MGA_DMA_BOOTSTRAP, drm_mga_dma_bootstrap_t)
+
+typedef struct _drm_mga_warp_index {
+	int installed;
+	unsigned long phys_addr;
+	int size;
+} drm_mga_warp_index_t;
+
+typedef struct drm_mga_init {
+	enum {
+		MGA_INIT_DMA = 0x01,
+		MGA_CLEANUP_DMA = 0x02
+	} func;
+
+	unsigned long sarea_priv_offset;
+
+	int chipset;
+	int sgram;
+
+	unsigned int maccess;
+
+	unsigned int fb_cpp;
+	unsigned int front_offset, front_pitch;
+	unsigned int back_offset, back_pitch;
+
+	unsigned int depth_cpp;
+	unsigned int depth_offset, depth_pitch;
+
+	unsigned int texture_offset[MGA_NR_TEX_HEAPS];
+	unsigned int texture_size[MGA_NR_TEX_HEAPS];
+
+	unsigned long fb_offset;
+	unsigned long mmio_offset;
+	unsigned long status_offset;
+	unsigned long warp_offset;
+	unsigned long primary_offset;
+	unsigned long buffers_offset;
+} drm_mga_init_t;
+
+typedef struct drm_mga_dma_bootstrap {
+	/**
+	 * \name AGP texture region
+	 *
+	 * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, these fields will
+	 * be filled in with the actual AGP texture settings.
+	 *
+	 * \warning
+	 * If these fields are non-zero, but dma_mga_dma_bootstrap::agp_mode
+	 * is zero, it means that PCI memory (most likely through the use of
+	 * an IOMMU) is being used for "AGP" textures.
+	 */
+	/*@{ */
+	unsigned long texture_handle; /**< Handle used to map AGP textures. */
+	__u32 texture_size;	      /**< Size of the AGP texture region. */
+	/*@} */
+
+	/**
+	 * Requested size of the primary DMA region.
+	 *
+	 * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, this field will be
+	 * filled in with the actual AGP mode.  If AGP was not available
+	 */
+	__u32 primary_size;
+
+	/**
+	 * Requested number of secondary DMA buffers.
+	 *
+	 * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, this field will be
+	 * filled in with the actual number of secondary DMA buffers
+	 * allocated.  Particularly when PCI DMA is used, this may be
+	 * (subtantially) less than the number requested.
+	 */
+	__u32 secondary_bin_count;
+
+	/**
+	 * Requested size of each secondary DMA buffer.
+	 *
+	 * While the kernel \b is free to reduce
+	 * dma_mga_dma_bootstrap::secondary_bin_count, it is \b not allowed
+	 * to reduce dma_mga_dma_bootstrap::secondary_bin_size.
+	 */
+	__u32 secondary_bin_size;
+
+	/**
+	 * Bit-wise mask of AGPSTAT2_* values.  Currently only \c AGPSTAT2_1X,
+	 * \c AGPSTAT2_2X, and \c AGPSTAT2_4X are supported.  If this value is
+	 * zero, it means that PCI DMA should be used, even if AGP is
+	 * possible.
+	 *
+	 * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, this field will be
+	 * filled in with the actual AGP mode.  If AGP was not available
+	 * (i.e., PCI DMA was used), this value will be zero.
+	 */
+	__u32 agp_mode;
+
+	/**
+	 * Desired AGP GART size, measured in megabytes.
+	 */
+	__u8 agp_size;
+} drm_mga_dma_bootstrap_t;
+
+typedef struct drm_mga_clear {
+	unsigned int flags;
+	unsigned int clear_color;
+	unsigned int clear_depth;
+	unsigned int color_mask;
+	unsigned int depth_mask;
+} drm_mga_clear_t;
+
+typedef struct drm_mga_vertex {
+	int idx;		/* buffer to queue */
+	int used;		/* bytes in use */
+	int discard;		/* client finished with buffer?  */
+} drm_mga_vertex_t;
+
+typedef struct drm_mga_indices {
+	int idx;		/* buffer to queue */
+	unsigned int start;
+	unsigned int end;
+	int discard;		/* client finished with buffer?  */
+} drm_mga_indices_t;
+
+typedef struct drm_mga_iload {
+	int idx;
+	unsigned int dstorg;
+	unsigned int length;
+} drm_mga_iload_t;
+
+typedef struct _drm_mga_blit {
+	unsigned int planemask;
+	unsigned int srcorg;
+	unsigned int dstorg;
+	int src_pitch, dst_pitch;
+	int delta_sx, delta_sy;
+	int delta_dx, delta_dy;
+	int height, ydir;	/* flip image vertically */
+	int source_pitch, dest_pitch;
+} drm_mga_blit_t;
+
+/* 3.1: An ioctl to get parameters that aren't available to the 3d
+ * client any other way.
+ */
+#define MGA_PARAM_IRQ_NR            1
+
+/* 3.2: Query the actual card type.  The DDX only distinguishes between
+ * G200 chips and non-G200 chips, which it calls G400.  It turns out that
+ * there are some very sublte differences between the G4x0 chips and the G550
+ * chips.  Using this parameter query, a client-side driver can detect the
+ * difference between a G4x0 and a G550.
+ */
+#define MGA_PARAM_CARD_TYPE         2
+
+typedef struct drm_mga_getparam {
+	int param;
+	void __user *value;
+} drm_mga_getparam_t;
+
+#endif
diff --git a/include/drm/nouveau_drm.h b/include/drm/nouveau_drm.h
new file mode 100644
index 00000000..5edd3a76
--- /dev/null
+++ b/include/drm/nouveau_drm.h
@@ -0,0 +1,218 @@
+/*
+ * Copyright 2005 Stephane Marchesin.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef __NOUVEAU_DRM_H__
+#define __NOUVEAU_DRM_H__
+
+#define NOUVEAU_DRM_HEADER_PATCHLEVEL 16
+
+struct drm_nouveau_channel_alloc {
+	uint32_t     fb_ctxdma_handle;
+	uint32_t     tt_ctxdma_handle;
+
+	int          channel;
+	uint32_t     pushbuf_domains;
+
+	/* Notifier memory */
+	uint32_t     notifier_handle;
+
+	/* DRM-enforced subchannel assignments */
+	struct {
+		uint32_t handle;
+		uint32_t grclass;
+	} subchan[8];
+	uint32_t nr_subchan;
+};
+
+struct drm_nouveau_channel_free {
+	int channel;
+};
+
+struct drm_nouveau_grobj_alloc {
+	int      channel;
+	uint32_t handle;
+	int      class;
+};
+
+struct drm_nouveau_notifierobj_alloc {
+	uint32_t channel;
+	uint32_t handle;
+	uint32_t size;
+	uint32_t offset;
+};
+
+struct drm_nouveau_gpuobj_free {
+	int      channel;
+	uint32_t handle;
+};
+
+/* FIXME : maybe unify {GET,SET}PARAMs */
+#define NOUVEAU_GETPARAM_PCI_VENDOR      3
+#define NOUVEAU_GETPARAM_PCI_DEVICE      4
+#define NOUVEAU_GETPARAM_BUS_TYPE        5
+#define NOUVEAU_GETPARAM_FB_SIZE         8
+#define NOUVEAU_GETPARAM_AGP_SIZE        9
+#define NOUVEAU_GETPARAM_CHIPSET_ID      11
+#define NOUVEAU_GETPARAM_VM_VRAM_BASE    12
+#define NOUVEAU_GETPARAM_GRAPH_UNITS     13
+#define NOUVEAU_GETPARAM_PTIMER_TIME     14
+#define NOUVEAU_GETPARAM_HAS_BO_USAGE    15
+#define NOUVEAU_GETPARAM_HAS_PAGEFLIP    16
+struct drm_nouveau_getparam {
+	uint64_t param;
+	uint64_t value;
+};
+
+struct drm_nouveau_setparam {
+	uint64_t param;
+	uint64_t value;
+};
+
+#define NOUVEAU_GEM_DOMAIN_CPU       (1 << 0)
+#define NOUVEAU_GEM_DOMAIN_VRAM      (1 << 1)
+#define NOUVEAU_GEM_DOMAIN_GART      (1 << 2)
+#define NOUVEAU_GEM_DOMAIN_MAPPABLE  (1 << 3)
+
+#define NOUVEAU_GEM_TILE_COMP        0x00030000 /* nv50-only */
+#define NOUVEAU_GEM_TILE_LAYOUT_MASK 0x0000ff00
+#define NOUVEAU_GEM_TILE_16BPP       0x00000001
+#define NOUVEAU_GEM_TILE_32BPP       0x00000002
+#define NOUVEAU_GEM_TILE_ZETA        0x00000004
+#define NOUVEAU_GEM_TILE_NONCONTIG   0x00000008
+
+struct drm_nouveau_gem_info {
+	uint32_t handle;
+	uint32_t domain;
+	uint64_t size;
+	uint64_t offset;
+	uint64_t map_handle;
+	uint32_t tile_mode;
+	uint32_t tile_flags;
+};
+
+struct drm_nouveau_gem_new {
+	struct drm_nouveau_gem_info info;
+	uint32_t channel_hint;
+	uint32_t align;
+};
+
+#define NOUVEAU_GEM_MAX_BUFFERS 1024
+struct drm_nouveau_gem_pushbuf_bo_presumed {
+	uint32_t valid;
+	uint32_t domain;
+	uint64_t offset;
+};
+
+struct drm_nouveau_gem_pushbuf_bo {
+	uint64_t user_priv;
+	uint32_t handle;
+	uint32_t read_domains;
+	uint32_t write_domains;
+	uint32_t valid_domains;
+	struct drm_nouveau_gem_pushbuf_bo_presumed presumed;
+};
+
+#define NOUVEAU_GEM_RELOC_LOW  (1 << 0)
+#define NOUVEAU_GEM_RELOC_HIGH (1 << 1)
+#define NOUVEAU_GEM_RELOC_OR   (1 << 2)
+#define NOUVEAU_GEM_MAX_RELOCS 1024
+struct drm_nouveau_gem_pushbuf_reloc {
+	uint32_t reloc_bo_index;
+	uint32_t reloc_bo_offset;
+	uint32_t bo_index;
+	uint32_t flags;
+	uint32_t data;
+	uint32_t vor;
+	uint32_t tor;
+};
+
+#define NOUVEAU_GEM_MAX_PUSH 512
+struct drm_nouveau_gem_pushbuf_push {
+	uint32_t bo_index;
+	uint32_t pad;
+	uint64_t offset;
+	uint64_t length;
+};
+
+struct drm_nouveau_gem_pushbuf {
+	uint32_t channel;
+	uint32_t nr_buffers;
+	uint64_t buffers;
+	uint32_t nr_relocs;
+	uint32_t nr_push;
+	uint64_t relocs;
+	uint64_t push;
+	uint32_t suffix0;
+	uint32_t suffix1;
+	uint64_t vram_available;
+	uint64_t gart_available;
+};
+
+#define NOUVEAU_GEM_CPU_PREP_NOWAIT                                  0x00000001
+#define NOUVEAU_GEM_CPU_PREP_WRITE                                   0x00000004
+struct drm_nouveau_gem_cpu_prep {
+	uint32_t handle;
+	uint32_t flags;
+};
+
+struct drm_nouveau_gem_cpu_fini {
+	uint32_t handle;
+};
+
+enum nouveau_bus_type {
+	NV_AGP     = 0,
+	NV_PCI     = 1,
+	NV_PCIE    = 2,
+};
+
+struct drm_nouveau_sarea {
+};
+
+#define DRM_NOUVEAU_GETPARAM           0x00
+#define DRM_NOUVEAU_SETPARAM           0x01
+#define DRM_NOUVEAU_CHANNEL_ALLOC      0x02
+#define DRM_NOUVEAU_CHANNEL_FREE       0x03
+#define DRM_NOUVEAU_GROBJ_ALLOC        0x04
+#define DRM_NOUVEAU_NOTIFIEROBJ_ALLOC  0x05
+#define DRM_NOUVEAU_GPUOBJ_FREE        0x06
+#define DRM_NOUVEAU_GEM_NEW            0x40
+#define DRM_NOUVEAU_GEM_PUSHBUF        0x41
+#define DRM_NOUVEAU_GEM_CPU_PREP       0x42
+#define DRM_NOUVEAU_GEM_CPU_FINI       0x43
+#define DRM_NOUVEAU_GEM_INFO           0x44
+
+#define DRM_IOCTL_NOUVEAU_GETPARAM           DRM_IOWR(DRM_COMMAND_BASE + DRM_NOUVEAU_GETPARAM, struct drm_nouveau_getparam)
+#define DRM_IOCTL_NOUVEAU_SETPARAM           DRM_IOWR(DRM_COMMAND_BASE + DRM_NOUVEAU_SETPARAM, struct drm_nouveau_setparam)
+#define DRM_IOCTL_NOUVEAU_CHANNEL_ALLOC      DRM_IOWR(DRM_COMMAND_BASE + DRM_NOUVEAU_CHANNEL_ALLOC, struct drm_nouveau_channel_alloc)
+#define DRM_IOCTL_NOUVEAU_CHANNEL_FREE       DRM_IOW (DRM_COMMAND_BASE + DRM_NOUVEAU_CHANNEL_FREE, struct drm_nouveau_channel_free)
+#define DRM_IOCTL_NOUVEAU_GROBJ_ALLOC        DRM_IOW (DRM_COMMAND_BASE + DRM_NOUVEAU_GROBJ_ALLOC, struct drm_nouveau_grobj_alloc)
+#define DRM_IOCTL_NOUVEAU_NOTIFIEROBJ_ALLOC  DRM_IOWR(DRM_COMMAND_BASE + DRM_NOUVEAU_NOTIFIEROBJ_ALLOC, struct drm_nouveau_notifierobj_alloc)
+#define DRM_IOCTL_NOUVEAU_GPUOBJ_FREE        DRM_IOW (DRM_COMMAND_BASE + DRM_NOUVEAU_GPUOBJ_FREE, struct drm_nouveau_gpuobj_free)
+#define DRM_IOCTL_NOUVEAU_GEM_NEW            DRM_IOWR(DRM_COMMAND_BASE + DRM_NOUVEAU_GEM_NEW, struct drm_nouveau_gem_new)
+#define DRM_IOCTL_NOUVEAU_GEM_PUSHBUF        DRM_IOWR(DRM_COMMAND_BASE + DRM_NOUVEAU_GEM_PUSHBUF, struct drm_nouveau_gem_pushbuf)
+#define DRM_IOCTL_NOUVEAU_GEM_CPU_PREP       DRM_IOW (DRM_COMMAND_BASE + DRM_NOUVEAU_GEM_CPU_PREP, struct drm_nouveau_gem_cpu_prep)
+#define DRM_IOCTL_NOUVEAU_GEM_CPU_FINI       DRM_IOW (DRM_COMMAND_BASE + DRM_NOUVEAU_GEM_CPU_FINI, struct drm_nouveau_gem_cpu_fini)
+#define DRM_IOCTL_NOUVEAU_GEM_INFO           DRM_IOWR(DRM_COMMAND_BASE + DRM_NOUVEAU_GEM_INFO, struct drm_nouveau_gem_info)
+
+#endif /* __NOUVEAU_DRM_H__ */
diff --git a/include/drm/r128_drm.h b/include/drm/r128_drm.h
new file mode 100644
index 00000000..8d8878b5
--- /dev/null
+++ b/include/drm/r128_drm.h
@@ -0,0 +1,326 @@
+/* r128_drm.h -- Public header for the r128 driver -*- linux-c -*-
+ * Created: Wed Apr  5 19:24:19 2000 by kevin@precisioninsight.com
+ */
+/*
+ * Copyright 2000 Precision Insight, Inc., Cedar Park, Texas.
+ * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
+ * All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Gareth Hughes <gareth@valinux.com>
+ *    Kevin E. Martin <martin@valinux.com>
+ */
+
+#ifndef __R128_DRM_H__
+#define __R128_DRM_H__
+
+/* WARNING: If you change any of these defines, make sure to change the
+ * defines in the X server file (r128_sarea.h)
+ */
+#ifndef __R128_SAREA_DEFINES__
+#define __R128_SAREA_DEFINES__
+
+/* What needs to be changed for the current vertex buffer?
+ */
+#define R128_UPLOAD_CONTEXT		0x001
+#define R128_UPLOAD_SETUP		0x002
+#define R128_UPLOAD_TEX0		0x004
+#define R128_UPLOAD_TEX1		0x008
+#define R128_UPLOAD_TEX0IMAGES		0x010
+#define R128_UPLOAD_TEX1IMAGES		0x020
+#define R128_UPLOAD_CORE		0x040
+#define R128_UPLOAD_MASKS		0x080
+#define R128_UPLOAD_WINDOW		0x100
+#define R128_UPLOAD_CLIPRECTS		0x200	/* handled client-side */
+#define R128_REQUIRE_QUIESCENCE		0x400
+#define R128_UPLOAD_ALL			0x7ff
+
+#define R128_FRONT			0x1
+#define R128_BACK			0x2
+#define R128_DEPTH			0x4
+
+/* Primitive types
+ */
+#define R128_POINTS			0x1
+#define R128_LINES			0x2
+#define R128_LINE_STRIP			0x3
+#define R128_TRIANGLES			0x4
+#define R128_TRIANGLE_FAN		0x5
+#define R128_TRIANGLE_STRIP		0x6
+
+/* Vertex/indirect buffer size
+ */
+#define R128_BUFFER_SIZE		16384
+
+/* Byte offsets for indirect buffer data
+ */
+#define R128_INDEX_PRIM_OFFSET		20
+#define R128_HOSTDATA_BLIT_OFFSET	32
+
+/* Keep these small for testing.
+ */
+#define R128_NR_SAREA_CLIPRECTS		12
+
+/* There are 2 heaps (local/AGP).  Each region within a heap is a
+ *  minimum of 64k, and there are at most 64 of them per heap.
+ */
+#define R128_LOCAL_TEX_HEAP		0
+#define R128_AGP_TEX_HEAP		1
+#define R128_NR_TEX_HEAPS		2
+#define R128_NR_TEX_REGIONS		64
+#define R128_LOG_TEX_GRANULARITY	16
+
+#define R128_NR_CONTEXT_REGS		12
+
+#define R128_MAX_TEXTURE_LEVELS		11
+#define R128_MAX_TEXTURE_UNITS		2
+
+#endif				/* __R128_SAREA_DEFINES__ */
+
+typedef struct {
+	/* Context state - can be written in one large chunk */
+	unsigned int dst_pitch_offset_c;
+	unsigned int dp_gui_master_cntl_c;
+	unsigned int sc_top_left_c;
+	unsigned int sc_bottom_right_c;
+	unsigned int z_offset_c;
+	unsigned int z_pitch_c;
+	unsigned int z_sten_cntl_c;
+	unsigned int tex_cntl_c;
+	unsigned int misc_3d_state_cntl_reg;
+	unsigned int texture_clr_cmp_clr_c;
+	unsigned int texture_clr_cmp_msk_c;
+	unsigned int fog_color_c;
+
+	/* Texture state */
+	unsigned int tex_size_pitch_c;
+	unsigned int constant_color_c;
+
+	/* Setup state */
+	unsigned int pm4_vc_fpu_setup;
+	unsigned int setup_cntl;
+
+	/* Mask state */
+	unsigned int dp_write_mask;
+	unsigned int sten_ref_mask_c;
+	unsigned int plane_3d_mask_c;
+
+	/* Window state */
+	unsigned int window_xy_offset;
+
+	/* Core state */
+	unsigned int scale_3d_cntl;
+} drm_r128_context_regs_t;
+
+/* Setup registers for each texture unit
+ */
+typedef struct {
+	unsigned int tex_cntl;
+	unsigned int tex_combine_cntl;
+	unsigned int tex_size_pitch;
+	unsigned int tex_offset[R128_MAX_TEXTURE_LEVELS];
+	unsigned int tex_border_color;
+} drm_r128_texture_regs_t;
+
+typedef struct drm_r128_sarea {
+	/* The channel for communication of state information to the kernel
+	 * on firing a vertex buffer.
+	 */
+	drm_r128_context_regs_t context_state;
+	drm_r128_texture_regs_t tex_state[R128_MAX_TEXTURE_UNITS];
+	unsigned int dirty;
+	unsigned int vertsize;
+	unsigned int vc_format;
+
+	/* The current cliprects, or a subset thereof.
+	 */
+	struct drm_clip_rect boxes[R128_NR_SAREA_CLIPRECTS];
+	unsigned int nbox;
+
+	/* Counters for client-side throttling of rendering clients.
+	 */
+	unsigned int last_frame;
+	unsigned int last_dispatch;
+
+	struct drm_tex_region tex_list[R128_NR_TEX_HEAPS][R128_NR_TEX_REGIONS + 1];
+	unsigned int tex_age[R128_NR_TEX_HEAPS];
+	int ctx_owner;
+	int pfAllowPageFlip;	/* number of 3d windows (0,1,2 or more) */
+	int pfCurrentPage;	/* which buffer is being displayed? */
+} drm_r128_sarea_t;
+
+/* WARNING: If you change any of these defines, make sure to change the
+ * defines in the Xserver file (xf86drmR128.h)
+ */
+
+/* Rage 128 specific ioctls
+ * The device specific ioctl range is 0x40 to 0x79.
+ */
+#define DRM_R128_INIT       0x00
+#define DRM_R128_CCE_START  0x01
+#define DRM_R128_CCE_STOP   0x02
+#define DRM_R128_CCE_RESET  0x03
+#define DRM_R128_CCE_IDLE   0x04
+/* 0x05 not used */
+#define DRM_R128_RESET      0x06
+#define DRM_R128_SWAP       0x07
+#define DRM_R128_CLEAR      0x08
+#define DRM_R128_VERTEX     0x09
+#define DRM_R128_INDICES    0x0a
+#define DRM_R128_BLIT       0x0b
+#define DRM_R128_DEPTH      0x0c
+#define DRM_R128_STIPPLE    0x0d
+/* 0x0e not used */
+#define DRM_R128_INDIRECT   0x0f
+#define DRM_R128_FULLSCREEN 0x10
+#define DRM_R128_CLEAR2     0x11
+#define DRM_R128_GETPARAM   0x12
+#define DRM_R128_FLIP       0x13
+
+#define DRM_IOCTL_R128_INIT       DRM_IOW( DRM_COMMAND_BASE + DRM_R128_INIT, drm_r128_init_t)
+#define DRM_IOCTL_R128_CCE_START  DRM_IO(  DRM_COMMAND_BASE + DRM_R128_CCE_START)
+#define DRM_IOCTL_R128_CCE_STOP   DRM_IOW( DRM_COMMAND_BASE + DRM_R128_CCE_STOP, drm_r128_cce_stop_t)
+#define DRM_IOCTL_R128_CCE_RESET  DRM_IO(  DRM_COMMAND_BASE + DRM_R128_CCE_RESET)
+#define DRM_IOCTL_R128_CCE_IDLE   DRM_IO(  DRM_COMMAND_BASE + DRM_R128_CCE_IDLE)
+/* 0x05 not used */
+#define DRM_IOCTL_R128_RESET      DRM_IO(  DRM_COMMAND_BASE + DRM_R128_RESET)
+#define DRM_IOCTL_R128_SWAP       DRM_IO(  DRM_COMMAND_BASE + DRM_R128_SWAP)
+#define DRM_IOCTL_R128_CLEAR      DRM_IOW( DRM_COMMAND_BASE + DRM_R128_CLEAR, drm_r128_clear_t)
+#define DRM_IOCTL_R128_VERTEX     DRM_IOW( DRM_COMMAND_BASE + DRM_R128_VERTEX, drm_r128_vertex_t)
+#define DRM_IOCTL_R128_INDICES    DRM_IOW( DRM_COMMAND_BASE + DRM_R128_INDICES, drm_r128_indices_t)
+#define DRM_IOCTL_R128_BLIT       DRM_IOW( DRM_COMMAND_BASE + DRM_R128_BLIT, drm_r128_blit_t)
+#define DRM_IOCTL_R128_DEPTH      DRM_IOW( DRM_COMMAND_BASE + DRM_R128_DEPTH, drm_r128_depth_t)
+#define DRM_IOCTL_R128_STIPPLE    DRM_IOW( DRM_COMMAND_BASE + DRM_R128_STIPPLE, drm_r128_stipple_t)
+/* 0x0e not used */
+#define DRM_IOCTL_R128_INDIRECT   DRM_IOWR(DRM_COMMAND_BASE + DRM_R128_INDIRECT, drm_r128_indirect_t)
+#define DRM_IOCTL_R128_FULLSCREEN DRM_IOW( DRM_COMMAND_BASE + DRM_R128_FULLSCREEN, drm_r128_fullscreen_t)
+#define DRM_IOCTL_R128_CLEAR2     DRM_IOW( DRM_COMMAND_BASE + DRM_R128_CLEAR2, drm_r128_clear2_t)
+#define DRM_IOCTL_R128_GETPARAM   DRM_IOWR( DRM_COMMAND_BASE + DRM_R128_GETPARAM, drm_r128_getparam_t)
+#define DRM_IOCTL_R128_FLIP       DRM_IO(  DRM_COMMAND_BASE + DRM_R128_FLIP)
+
+typedef struct drm_r128_init {
+	enum {
+		R128_INIT_CCE = 0x01,
+		R128_CLEANUP_CCE = 0x02
+	} func;
+	unsigned long sarea_priv_offset;
+	int is_pci;
+	int cce_mode;
+	int cce_secure;
+	int ring_size;
+	int usec_timeout;
+
+	unsigned int fb_bpp;
+	unsigned int front_offset, front_pitch;
+	unsigned int back_offset, back_pitch;
+	unsigned int depth_bpp;
+	unsigned int depth_offset, depth_pitch;
+	unsigned int span_offset;
+
+	unsigned long fb_offset;
+	unsigned long mmio_offset;
+	unsigned long ring_offset;
+	unsigned long ring_rptr_offset;
+	unsigned long buffers_offset;
+	unsigned long agp_textures_offset;
+} drm_r128_init_t;
+
+typedef struct drm_r128_cce_stop {
+	int flush;
+	int idle;
+} drm_r128_cce_stop_t;
+
+typedef struct drm_r128_clear {
+	unsigned int flags;
+	unsigned int clear_color;
+	unsigned int clear_depth;
+	unsigned int color_mask;
+	unsigned int depth_mask;
+} drm_r128_clear_t;
+
+typedef struct drm_r128_vertex {
+	int prim;
+	int idx;		/* Index of vertex buffer */
+	int count;		/* Number of vertices in buffer */
+	int discard;		/* Client finished with buffer? */
+} drm_r128_vertex_t;
+
+typedef struct drm_r128_indices {
+	int prim;
+	int idx;
+	int start;
+	int end;
+	int discard;		/* Client finished with buffer? */
+} drm_r128_indices_t;
+
+typedef struct drm_r128_blit {
+	int idx;
+	int pitch;
+	int offset;
+	int format;
+	unsigned short x, y;
+	unsigned short width, height;
+} drm_r128_blit_t;
+
+typedef struct drm_r128_depth {
+	enum {
+		R128_WRITE_SPAN = 0x01,
+		R128_WRITE_PIXELS = 0x02,
+		R128_READ_SPAN = 0x03,
+		R128_READ_PIXELS = 0x04
+	} func;
+	int n;
+	int __user *x;
+	int __user *y;
+	unsigned int __user *buffer;
+	unsigned char __user *mask;
+} drm_r128_depth_t;
+
+typedef struct drm_r128_stipple {
+	unsigned int __user *mask;
+} drm_r128_stipple_t;
+
+typedef struct drm_r128_indirect {
+	int idx;
+	int start;
+	int end;
+	int discard;
+} drm_r128_indirect_t;
+
+typedef struct drm_r128_fullscreen {
+	enum {
+		R128_INIT_FULLSCREEN = 0x01,
+		R128_CLEANUP_FULLSCREEN = 0x02
+	} func;
+} drm_r128_fullscreen_t;
+
+/* 2.3: An ioctl to get parameters that aren't available to the 3d
+ * client any other way.
+ */
+#define R128_PARAM_IRQ_NR            1
+
+typedef struct drm_r128_getparam {
+	int param;
+	void __user *value;
+} drm_r128_getparam_t;
+
+#endif
diff --git a/include/drm/radeon_drm.h b/include/drm/radeon_drm.h
new file mode 100644
index 00000000..7c491b4b
--- /dev/null
+++ b/include/drm/radeon_drm.h
@@ -0,0 +1,975 @@
+/* radeon_drm.h -- Public header for the radeon driver -*- linux-c -*-
+ *
+ * Copyright 2000 Precision Insight, Inc., Cedar Park, Texas.
+ * Copyright 2000 VA Linux Systems, Inc., Fremont, California.
+ * Copyright 2002 Tungsten Graphics, Inc., Cedar Park, Texas.
+ * All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Kevin E. Martin <martin@valinux.com>
+ *    Gareth Hughes <gareth@valinux.com>
+ *    Keith Whitwell <keith@tungstengraphics.com>
+ */
+
+#ifndef __RADEON_DRM_H__
+#define __RADEON_DRM_H__
+
+#include "drm.h"
+
+/* WARNING: If you change any of these defines, make sure to change the
+ * defines in the X server file (radeon_sarea.h)
+ */
+#ifndef __RADEON_SAREA_DEFINES__
+#define __RADEON_SAREA_DEFINES__
+
+/* Old style state flags, required for sarea interface (1.1 and 1.2
+ * clears) and 1.2 drm_vertex2 ioctl.
+ */
+#define RADEON_UPLOAD_CONTEXT		0x00000001
+#define RADEON_UPLOAD_VERTFMT		0x00000002
+#define RADEON_UPLOAD_LINE		0x00000004
+#define RADEON_UPLOAD_BUMPMAP		0x00000008
+#define RADEON_UPLOAD_MASKS		0x00000010
+#define RADEON_UPLOAD_VIEWPORT		0x00000020
+#define RADEON_UPLOAD_SETUP		0x00000040
+#define RADEON_UPLOAD_TCL		0x00000080
+#define RADEON_UPLOAD_MISC		0x00000100
+#define RADEON_UPLOAD_TEX0		0x00000200
+#define RADEON_UPLOAD_TEX1		0x00000400
+#define RADEON_UPLOAD_TEX2		0x00000800
+#define RADEON_UPLOAD_TEX0IMAGES	0x00001000
+#define RADEON_UPLOAD_TEX1IMAGES	0x00002000
+#define RADEON_UPLOAD_TEX2IMAGES	0x00004000
+#define RADEON_UPLOAD_CLIPRECTS		0x00008000	/* handled client-side */
+#define RADEON_REQUIRE_QUIESCENCE	0x00010000
+#define RADEON_UPLOAD_ZBIAS		0x00020000	/* version 1.2 and newer */
+#define RADEON_UPLOAD_ALL		0x003effff
+#define RADEON_UPLOAD_CONTEXT_ALL       0x003e01ff
+
+/* New style per-packet identifiers for use in cmd_buffer ioctl with
+ * the RADEON_EMIT_PACKET command.  Comments relate new packets to old
+ * state bits and the packet size:
+ */
+#define RADEON_EMIT_PP_MISC                         0	/* context/7 */
+#define RADEON_EMIT_PP_CNTL                         1	/* context/3 */
+#define RADEON_EMIT_RB3D_COLORPITCH                 2	/* context/1 */
+#define RADEON_EMIT_RE_LINE_PATTERN                 3	/* line/2 */
+#define RADEON_EMIT_SE_LINE_WIDTH                   4	/* line/1 */
+#define RADEON_EMIT_PP_LUM_MATRIX                   5	/* bumpmap/1 */
+#define RADEON_EMIT_PP_ROT_MATRIX_0                 6	/* bumpmap/2 */
+#define RADEON_EMIT_RB3D_STENCILREFMASK             7	/* masks/3 */
+#define RADEON_EMIT_SE_VPORT_XSCALE                 8	/* viewport/6 */
+#define RADEON_EMIT_SE_CNTL                         9	/* setup/2 */
+#define RADEON_EMIT_SE_CNTL_STATUS                  10	/* setup/1 */
+#define RADEON_EMIT_RE_MISC                         11	/* misc/1 */
+#define RADEON_EMIT_PP_TXFILTER_0                   12	/* tex0/6 */
+#define RADEON_EMIT_PP_BORDER_COLOR_0               13	/* tex0/1 */
+#define RADEON_EMIT_PP_TXFILTER_1                   14	/* tex1/6 */
+#define RADEON_EMIT_PP_BORDER_COLOR_1               15	/* tex1/1 */
+#define RADEON_EMIT_PP_TXFILTER_2                   16	/* tex2/6 */
+#define RADEON_EMIT_PP_BORDER_COLOR_2               17	/* tex2/1 */
+#define RADEON_EMIT_SE_ZBIAS_FACTOR                 18	/* zbias/2 */
+#define RADEON_EMIT_SE_TCL_OUTPUT_VTX_FMT           19	/* tcl/11 */
+#define RADEON_EMIT_SE_TCL_MATERIAL_EMMISSIVE_RED   20	/* material/17 */
+#define R200_EMIT_PP_TXCBLEND_0                     21	/* tex0/4 */
+#define R200_EMIT_PP_TXCBLEND_1                     22	/* tex1/4 */
+#define R200_EMIT_PP_TXCBLEND_2                     23	/* tex2/4 */
+#define R200_EMIT_PP_TXCBLEND_3                     24	/* tex3/4 */
+#define R200_EMIT_PP_TXCBLEND_4                     25	/* tex4/4 */
+#define R200_EMIT_PP_TXCBLEND_5                     26	/* tex5/4 */
+#define R200_EMIT_PP_TXCBLEND_6                     27	/* /4 */
+#define R200_EMIT_PP_TXCBLEND_7                     28	/* /4 */
+#define R200_EMIT_TCL_LIGHT_MODEL_CTL_0             29	/* tcl/7 */
+#define R200_EMIT_TFACTOR_0                         30	/* tf/7 */
+#define R200_EMIT_VTX_FMT_0                         31	/* vtx/5 */
+#define R200_EMIT_VAP_CTL                           32	/* vap/1 */
+#define R200_EMIT_MATRIX_SELECT_0                   33	/* msl/5 */
+#define R200_EMIT_TEX_PROC_CTL_2                    34	/* tcg/5 */
+#define R200_EMIT_TCL_UCP_VERT_BLEND_CTL            35	/* tcl/1 */
+#define R200_EMIT_PP_TXFILTER_0                     36	/* tex0/6 */
+#define R200_EMIT_PP_TXFILTER_1                     37	/* tex1/6 */
+#define R200_EMIT_PP_TXFILTER_2                     38	/* tex2/6 */
+#define R200_EMIT_PP_TXFILTER_3                     39	/* tex3/6 */
+#define R200_EMIT_PP_TXFILTER_4                     40	/* tex4/6 */
+#define R200_EMIT_PP_TXFILTER_5                     41	/* tex5/6 */
+#define R200_EMIT_PP_TXOFFSET_0                     42	/* tex0/1 */
+#define R200_EMIT_PP_TXOFFSET_1                     43	/* tex1/1 */
+#define R200_EMIT_PP_TXOFFSET_2                     44	/* tex2/1 */
+#define R200_EMIT_PP_TXOFFSET_3                     45	/* tex3/1 */
+#define R200_EMIT_PP_TXOFFSET_4                     46	/* tex4/1 */
+#define R200_EMIT_PP_TXOFFSET_5                     47	/* tex5/1 */
+#define R200_EMIT_VTE_CNTL                          48	/* vte/1 */
+#define R200_EMIT_OUTPUT_VTX_COMP_SEL               49	/* vtx/1 */
+#define R200_EMIT_PP_TAM_DEBUG3                     50	/* tam/1 */
+#define R200_EMIT_PP_CNTL_X                         51	/* cst/1 */
+#define R200_EMIT_RB3D_DEPTHXY_OFFSET               52	/* cst/1 */
+#define R200_EMIT_RE_AUX_SCISSOR_CNTL               53	/* cst/1 */
+#define R200_EMIT_RE_SCISSOR_TL_0                   54	/* cst/2 */
+#define R200_EMIT_RE_SCISSOR_TL_1                   55	/* cst/2 */
+#define R200_EMIT_RE_SCISSOR_TL_2                   56	/* cst/2 */
+#define R200_EMIT_SE_VAP_CNTL_STATUS                57	/* cst/1 */
+#define R200_EMIT_SE_VTX_STATE_CNTL                 58	/* cst/1 */
+#define R200_EMIT_RE_POINTSIZE                      59	/* cst/1 */
+#define R200_EMIT_TCL_INPUT_VTX_VECTOR_ADDR_0       60	/* cst/4 */
+#define R200_EMIT_PP_CUBIC_FACES_0                  61
+#define R200_EMIT_PP_CUBIC_OFFSETS_0                62
+#define R200_EMIT_PP_CUBIC_FACES_1                  63
+#define R200_EMIT_PP_CUBIC_OFFSETS_1                64
+#define R200_EMIT_PP_CUBIC_FACES_2                  65
+#define R200_EMIT_PP_CUBIC_OFFSETS_2                66
+#define R200_EMIT_PP_CUBIC_FACES_3                  67
+#define R200_EMIT_PP_CUBIC_OFFSETS_3                68
+#define R200_EMIT_PP_CUBIC_FACES_4                  69
+#define R200_EMIT_PP_CUBIC_OFFSETS_4                70
+#define R200_EMIT_PP_CUBIC_FACES_5                  71
+#define R200_EMIT_PP_CUBIC_OFFSETS_5                72
+#define RADEON_EMIT_PP_TEX_SIZE_0                   73
+#define RADEON_EMIT_PP_TEX_SIZE_1                   74
+#define RADEON_EMIT_PP_TEX_SIZE_2                   75
+#define R200_EMIT_RB3D_BLENDCOLOR                   76
+#define R200_EMIT_TCL_POINT_SPRITE_CNTL             77
+#define RADEON_EMIT_PP_CUBIC_FACES_0                78
+#define RADEON_EMIT_PP_CUBIC_OFFSETS_T0             79
+#define RADEON_EMIT_PP_CUBIC_FACES_1                80
+#define RADEON_EMIT_PP_CUBIC_OFFSETS_T1             81
+#define RADEON_EMIT_PP_CUBIC_FACES_2                82
+#define RADEON_EMIT_PP_CUBIC_OFFSETS_T2             83
+#define R200_EMIT_PP_TRI_PERF_CNTL                  84
+#define R200_EMIT_PP_AFS_0                          85
+#define R200_EMIT_PP_AFS_1                          86
+#define R200_EMIT_ATF_TFACTOR                       87
+#define R200_EMIT_PP_TXCTLALL_0                     88
+#define R200_EMIT_PP_TXCTLALL_1                     89
+#define R200_EMIT_PP_TXCTLALL_2                     90
+#define R200_EMIT_PP_TXCTLALL_3                     91
+#define R200_EMIT_PP_TXCTLALL_4                     92
+#define R200_EMIT_PP_TXCTLALL_5                     93
+#define R200_EMIT_VAP_PVS_CNTL                      94
+#define RADEON_MAX_STATE_PACKETS                    95
+
+/* Commands understood by cmd_buffer ioctl.  More can be added but
+ * obviously these can't be removed or changed:
+ */
+#define RADEON_CMD_PACKET      1	/* emit one of the register packets above */
+#define RADEON_CMD_SCALARS     2	/* emit scalar data */
+#define RADEON_CMD_VECTORS     3	/* emit vector data */
+#define RADEON_CMD_DMA_DISCARD 4	/* discard current dma buf */
+#define RADEON_CMD_PACKET3     5	/* emit hw packet */
+#define RADEON_CMD_PACKET3_CLIP 6	/* emit hw packet wrapped in cliprects */
+#define RADEON_CMD_SCALARS2     7	/* r200 stopgap */
+#define RADEON_CMD_WAIT         8	/* emit hw wait commands -- note:
+					 *  doesn't make the cpu wait, just
+					 *  the graphics hardware */
+#define RADEON_CMD_VECLINEAR	9       /* another r200 stopgap */
+
+typedef union {
+	int i;
+	struct {
+		unsigned char cmd_type, pad0, pad1, pad2;
+	} header;
+	struct {
+		unsigned char cmd_type, packet_id, pad0, pad1;
+	} packet;
+	struct {
+		unsigned char cmd_type, offset, stride, count;
+	} scalars;
+	struct {
+		unsigned char cmd_type, offset, stride, count;
+	} vectors;
+	struct {
+		unsigned char cmd_type, addr_lo, addr_hi, count;
+	} veclinear;
+	struct {
+		unsigned char cmd_type, buf_idx, pad0, pad1;
+	} dma;
+	struct {
+		unsigned char cmd_type, flags, pad0, pad1;
+	} wait;
+} drm_radeon_cmd_header_t;
+
+#define RADEON_WAIT_2D  0x1
+#define RADEON_WAIT_3D  0x2
+
+/* Allowed parameters for R300_CMD_PACKET3
+ */
+#define R300_CMD_PACKET3_CLEAR		0
+#define R300_CMD_PACKET3_RAW		1
+
+/* Commands understood by cmd_buffer ioctl for R300.
+ * The interface has not been stabilized, so some of these may be removed
+ * and eventually reordered before stabilization.
+ */
+#define R300_CMD_PACKET0		1
+#define R300_CMD_VPU			2	/* emit vertex program upload */
+#define R300_CMD_PACKET3		3	/* emit a packet3 */
+#define R300_CMD_END3D			4	/* emit sequence ending 3d rendering */
+#define R300_CMD_CP_DELAY		5
+#define R300_CMD_DMA_DISCARD		6
+#define R300_CMD_WAIT			7
+#	define R300_WAIT_2D		0x1
+#	define R300_WAIT_3D		0x2
+/* these two defines are DOING IT WRONG - however
+ * we have userspace which relies on using these.
+ * The wait interface is backwards compat new 
+ * code should use the NEW_WAIT defines below
+ * THESE ARE NOT BIT FIELDS
+ */
+#	define R300_WAIT_2D_CLEAN	0x3
+#	define R300_WAIT_3D_CLEAN	0x4
+
+#	define R300_NEW_WAIT_2D_3D	0x3
+#	define R300_NEW_WAIT_2D_2D_CLEAN	0x4
+#	define R300_NEW_WAIT_3D_3D_CLEAN	0x6
+#	define R300_NEW_WAIT_2D_2D_CLEAN_3D_3D_CLEAN	0x8
+
+#define R300_CMD_SCRATCH		8
+#define R300_CMD_R500FP                 9
+
+typedef union {
+	unsigned int u;
+	struct {
+		unsigned char cmd_type, pad0, pad1, pad2;
+	} header;
+	struct {
+		unsigned char cmd_type, count, reglo, reghi;
+	} packet0;
+	struct {
+		unsigned char cmd_type, count, adrlo, adrhi;
+	} vpu;
+	struct {
+		unsigned char cmd_type, packet, pad0, pad1;
+	} packet3;
+	struct {
+		unsigned char cmd_type, packet;
+		unsigned short count;	/* amount of packet2 to emit */
+	} delay;
+	struct {
+		unsigned char cmd_type, buf_idx, pad0, pad1;
+	} dma;
+	struct {
+		unsigned char cmd_type, flags, pad0, pad1;
+	} wait;
+	struct {
+		unsigned char cmd_type, reg, n_bufs, flags;
+	} scratch;
+	struct {
+		unsigned char cmd_type, count, adrlo, adrhi_flags;
+	} r500fp;
+} drm_r300_cmd_header_t;
+
+#define RADEON_FRONT			0x1
+#define RADEON_BACK			0x2
+#define RADEON_DEPTH			0x4
+#define RADEON_STENCIL			0x8
+#define RADEON_CLEAR_FASTZ		0x80000000
+#define RADEON_USE_HIERZ		0x40000000
+#define RADEON_USE_COMP_ZBUF		0x20000000
+
+#define R500FP_CONSTANT_TYPE  (1 << 1)
+#define R500FP_CONSTANT_CLAMP (1 << 2)
+
+/* Primitive types
+ */
+#define RADEON_POINTS			0x1
+#define RADEON_LINES			0x2
+#define RADEON_LINE_STRIP		0x3
+#define RADEON_TRIANGLES		0x4
+#define RADEON_TRIANGLE_FAN		0x5
+#define RADEON_TRIANGLE_STRIP		0x6
+
+/* Vertex/indirect buffer size
+ */
+#define RADEON_BUFFER_SIZE		65536
+
+/* Byte offsets for indirect buffer data
+ */
+#define RADEON_INDEX_PRIM_OFFSET	20
+
+#define RADEON_SCRATCH_REG_OFFSET	32
+
+#define R600_SCRATCH_REG_OFFSET         256
+
+#define RADEON_NR_SAREA_CLIPRECTS	12
+
+/* There are 2 heaps (local/GART).  Each region within a heap is a
+ * minimum of 64k, and there are at most 64 of them per heap.
+ */
+#define RADEON_LOCAL_TEX_HEAP		0
+#define RADEON_GART_TEX_HEAP		1
+#define RADEON_NR_TEX_HEAPS		2
+#define RADEON_NR_TEX_REGIONS		64
+#define RADEON_LOG_TEX_GRANULARITY	16
+
+#define RADEON_MAX_TEXTURE_LEVELS	12
+#define RADEON_MAX_TEXTURE_UNITS	3
+
+#define RADEON_MAX_SURFACES		8
+
+/* Blits have strict offset rules.  All blit offset must be aligned on
+ * a 1K-byte boundary.
+ */
+#define RADEON_OFFSET_SHIFT             10
+#define RADEON_OFFSET_ALIGN             (1 << RADEON_OFFSET_SHIFT)
+#define RADEON_OFFSET_MASK              (RADEON_OFFSET_ALIGN - 1)
+
+#endif				/* __RADEON_SAREA_DEFINES__ */
+
+typedef struct {
+	unsigned int red;
+	unsigned int green;
+	unsigned int blue;
+	unsigned int alpha;
+} radeon_color_regs_t;
+
+typedef struct {
+	/* Context state */
+	unsigned int pp_misc;	/* 0x1c14 */
+	unsigned int pp_fog_color;
+	unsigned int re_solid_color;
+	unsigned int rb3d_blendcntl;
+	unsigned int rb3d_depthoffset;
+	unsigned int rb3d_depthpitch;
+	unsigned int rb3d_zstencilcntl;
+
+	unsigned int pp_cntl;	/* 0x1c38 */
+	unsigned int rb3d_cntl;
+	unsigned int rb3d_coloroffset;
+	unsigned int re_width_height;
+	unsigned int rb3d_colorpitch;
+	unsigned int se_cntl;
+
+	/* Vertex format state */
+	unsigned int se_coord_fmt;	/* 0x1c50 */
+
+	/* Line state */
+	unsigned int re_line_pattern;	/* 0x1cd0 */
+	unsigned int re_line_state;
+
+	unsigned int se_line_width;	/* 0x1db8 */
+
+	/* Bumpmap state */
+	unsigned int pp_lum_matrix;	/* 0x1d00 */
+
+	unsigned int pp_rot_matrix_0;	/* 0x1d58 */
+	unsigned int pp_rot_matrix_1;
+
+	/* Mask state */
+	unsigned int rb3d_stencilrefmask;	/* 0x1d7c */
+	unsigned int rb3d_ropcntl;
+	unsigned int rb3d_planemask;
+
+	/* Viewport state */
+	unsigned int se_vport_xscale;	/* 0x1d98 */
+	unsigned int se_vport_xoffset;
+	unsigned int se_vport_yscale;
+	unsigned int se_vport_yoffset;
+	unsigned int se_vport_zscale;
+	unsigned int se_vport_zoffset;
+
+	/* Setup state */
+	unsigned int se_cntl_status;	/* 0x2140 */
+
+	/* Misc state */
+	unsigned int re_top_left;	/* 0x26c0 */
+	unsigned int re_misc;
+} drm_radeon_context_regs_t;
+
+typedef struct {
+	/* Zbias state */
+	unsigned int se_zbias_factor;	/* 0x1dac */
+	unsigned int se_zbias_constant;
+} drm_radeon_context2_regs_t;
+
+/* Setup registers for each texture unit
+ */
+typedef struct {
+	unsigned int pp_txfilter;
+	unsigned int pp_txformat;
+	unsigned int pp_txoffset;
+	unsigned int pp_txcblend;
+	unsigned int pp_txablend;
+	unsigned int pp_tfactor;
+	unsigned int pp_border_color;
+} drm_radeon_texture_regs_t;
+
+typedef struct {
+	unsigned int start;
+	unsigned int finish;
+	unsigned int prim:8;
+	unsigned int stateidx:8;
+	unsigned int numverts:16;	/* overloaded as offset/64 for elt prims */
+	unsigned int vc_format;	/* vertex format */
+} drm_radeon_prim_t;
+
+typedef struct {
+	drm_radeon_context_regs_t context;
+	drm_radeon_texture_regs_t tex[RADEON_MAX_TEXTURE_UNITS];
+	drm_radeon_context2_regs_t context2;
+	unsigned int dirty;
+} drm_radeon_state_t;
+
+typedef struct {
+	/* The channel for communication of state information to the
+	 * kernel on firing a vertex buffer with either of the
+	 * obsoleted vertex/index ioctls.
+	 */
+	drm_radeon_context_regs_t context_state;
+	drm_radeon_texture_regs_t tex_state[RADEON_MAX_TEXTURE_UNITS];
+	unsigned int dirty;
+	unsigned int vertsize;
+	unsigned int vc_format;
+
+	/* The current cliprects, or a subset thereof.
+	 */
+	struct drm_clip_rect boxes[RADEON_NR_SAREA_CLIPRECTS];
+	unsigned int nbox;
+
+	/* Counters for client-side throttling of rendering clients.
+	 */
+	unsigned int last_frame;
+	unsigned int last_dispatch;
+	unsigned int last_clear;
+
+	struct drm_tex_region tex_list[RADEON_NR_TEX_HEAPS][RADEON_NR_TEX_REGIONS +
+						       1];
+	unsigned int tex_age[RADEON_NR_TEX_HEAPS];
+	int ctx_owner;
+	int pfState;		/* number of 3d windows (0,1,2ormore) */
+	int pfCurrentPage;	/* which buffer is being displayed? */
+	int crtc2_base;		/* CRTC2 frame offset */
+	int tiling_enabled;	/* set by drm, read by 2d + 3d clients */
+} drm_radeon_sarea_t;
+
+/* WARNING: If you change any of these defines, make sure to change the
+ * defines in the Xserver file (xf86drmRadeon.h)
+ *
+ * KW: actually it's illegal to change any of this (backwards compatibility).
+ */
+
+/* Radeon specific ioctls
+ * The device specific ioctl range is 0x40 to 0x79.
+ */
+#define DRM_RADEON_CP_INIT    0x00
+#define DRM_RADEON_CP_START   0x01
+#define DRM_RADEON_CP_STOP    0x02
+#define DRM_RADEON_CP_RESET   0x03
+#define DRM_RADEON_CP_IDLE    0x04
+#define DRM_RADEON_RESET      0x05
+#define DRM_RADEON_FULLSCREEN 0x06
+#define DRM_RADEON_SWAP       0x07
+#define DRM_RADEON_CLEAR      0x08
+#define DRM_RADEON_VERTEX     0x09
+#define DRM_RADEON_INDICES    0x0A
+#define DRM_RADEON_NOT_USED
+#define DRM_RADEON_STIPPLE    0x0C
+#define DRM_RADEON_INDIRECT   0x0D
+#define DRM_RADEON_TEXTURE    0x0E
+#define DRM_RADEON_VERTEX2    0x0F
+#define DRM_RADEON_CMDBUF     0x10
+#define DRM_RADEON_GETPARAM   0x11
+#define DRM_RADEON_FLIP       0x12
+#define DRM_RADEON_ALLOC      0x13
+#define DRM_RADEON_FREE       0x14
+#define DRM_RADEON_INIT_HEAP  0x15
+#define DRM_RADEON_IRQ_EMIT   0x16
+#define DRM_RADEON_IRQ_WAIT   0x17
+#define DRM_RADEON_CP_RESUME  0x18
+#define DRM_RADEON_SETPARAM   0x19
+#define DRM_RADEON_SURF_ALLOC 0x1a
+#define DRM_RADEON_SURF_FREE  0x1b
+/* KMS ioctl */
+#define DRM_RADEON_GEM_INFO		0x1c
+#define DRM_RADEON_GEM_CREATE		0x1d
+#define DRM_RADEON_GEM_MMAP		0x1e
+#define DRM_RADEON_GEM_PREAD		0x21
+#define DRM_RADEON_GEM_PWRITE		0x22
+#define DRM_RADEON_GEM_SET_DOMAIN	0x23
+#define DRM_RADEON_GEM_WAIT_IDLE	0x24
+#define DRM_RADEON_CS			0x26
+#define DRM_RADEON_INFO			0x27
+#define DRM_RADEON_GEM_SET_TILING	0x28
+#define DRM_RADEON_GEM_GET_TILING	0x29
+#define DRM_RADEON_GEM_BUSY		0x2a
+#define DRM_RADEON_GEM_VA		0x2b
+
+#define DRM_IOCTL_RADEON_CP_INIT    DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_CP_INIT, drm_radeon_init_t)
+#define DRM_IOCTL_RADEON_CP_START   DRM_IO(  DRM_COMMAND_BASE + DRM_RADEON_CP_START)
+#define DRM_IOCTL_RADEON_CP_STOP    DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_CP_STOP, drm_radeon_cp_stop_t)
+#define DRM_IOCTL_RADEON_CP_RESET   DRM_IO(  DRM_COMMAND_BASE + DRM_RADEON_CP_RESET)
+#define DRM_IOCTL_RADEON_CP_IDLE    DRM_IO(  DRM_COMMAND_BASE + DRM_RADEON_CP_IDLE)
+#define DRM_IOCTL_RADEON_RESET      DRM_IO(  DRM_COMMAND_BASE + DRM_RADEON_RESET)
+#define DRM_IOCTL_RADEON_FULLSCREEN DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_FULLSCREEN, drm_radeon_fullscreen_t)
+#define DRM_IOCTL_RADEON_SWAP       DRM_IO(  DRM_COMMAND_BASE + DRM_RADEON_SWAP)
+#define DRM_IOCTL_RADEON_CLEAR      DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_CLEAR, drm_radeon_clear_t)
+#define DRM_IOCTL_RADEON_VERTEX     DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_VERTEX, drm_radeon_vertex_t)
+#define DRM_IOCTL_RADEON_INDICES    DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_INDICES, drm_radeon_indices_t)
+#define DRM_IOCTL_RADEON_STIPPLE    DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_STIPPLE, drm_radeon_stipple_t)
+#define DRM_IOCTL_RADEON_INDIRECT   DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_INDIRECT, drm_radeon_indirect_t)
+#define DRM_IOCTL_RADEON_TEXTURE    DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_TEXTURE, drm_radeon_texture_t)
+#define DRM_IOCTL_RADEON_VERTEX2    DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_VERTEX2, drm_radeon_vertex2_t)
+#define DRM_IOCTL_RADEON_CMDBUF     DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_CMDBUF, drm_radeon_cmd_buffer_t)
+#define DRM_IOCTL_RADEON_GETPARAM   DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GETPARAM, drm_radeon_getparam_t)
+#define DRM_IOCTL_RADEON_FLIP       DRM_IO(  DRM_COMMAND_BASE + DRM_RADEON_FLIP)
+#define DRM_IOCTL_RADEON_ALLOC      DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_ALLOC, drm_radeon_mem_alloc_t)
+#define DRM_IOCTL_RADEON_FREE       DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_FREE, drm_radeon_mem_free_t)
+#define DRM_IOCTL_RADEON_INIT_HEAP  DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_INIT_HEAP, drm_radeon_mem_init_heap_t)
+#define DRM_IOCTL_RADEON_IRQ_EMIT   DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_IRQ_EMIT, drm_radeon_irq_emit_t)
+#define DRM_IOCTL_RADEON_IRQ_WAIT   DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_IRQ_WAIT, drm_radeon_irq_wait_t)
+#define DRM_IOCTL_RADEON_CP_RESUME  DRM_IO(  DRM_COMMAND_BASE + DRM_RADEON_CP_RESUME)
+#define DRM_IOCTL_RADEON_SETPARAM   DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_SETPARAM, drm_radeon_setparam_t)
+#define DRM_IOCTL_RADEON_SURF_ALLOC DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_SURF_ALLOC, drm_radeon_surface_alloc_t)
+#define DRM_IOCTL_RADEON_SURF_FREE  DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_SURF_FREE, drm_radeon_surface_free_t)
+/* KMS */
+#define DRM_IOCTL_RADEON_GEM_INFO	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_INFO, struct drm_radeon_gem_info)
+#define DRM_IOCTL_RADEON_GEM_CREATE	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_CREATE, struct drm_radeon_gem_create)
+#define DRM_IOCTL_RADEON_GEM_MMAP	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_MMAP, struct drm_radeon_gem_mmap)
+#define DRM_IOCTL_RADEON_GEM_PREAD	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_PREAD, struct drm_radeon_gem_pread)
+#define DRM_IOCTL_RADEON_GEM_PWRITE	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_PWRITE, struct drm_radeon_gem_pwrite)
+#define DRM_IOCTL_RADEON_GEM_SET_DOMAIN	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_SET_DOMAIN, struct drm_radeon_gem_set_domain)
+#define DRM_IOCTL_RADEON_GEM_WAIT_IDLE	DRM_IOW(DRM_COMMAND_BASE + DRM_RADEON_GEM_WAIT_IDLE, struct drm_radeon_gem_wait_idle)
+#define DRM_IOCTL_RADEON_CS		DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_CS, struct drm_radeon_cs)
+#define DRM_IOCTL_RADEON_INFO		DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_INFO, struct drm_radeon_info)
+#define DRM_IOCTL_RADEON_GEM_SET_TILING	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_SET_TILING, struct drm_radeon_gem_set_tiling)
+#define DRM_IOCTL_RADEON_GEM_GET_TILING	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_GET_TILING, struct drm_radeon_gem_get_tiling)
+#define DRM_IOCTL_RADEON_GEM_BUSY	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_BUSY, struct drm_radeon_gem_busy)
+#define DRM_IOCTL_RADEON_GEM_VA		DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_VA, struct drm_radeon_gem_va)
+
+typedef struct drm_radeon_init {
+	enum {
+		RADEON_INIT_CP = 0x01,
+		RADEON_CLEANUP_CP = 0x02,
+		RADEON_INIT_R200_CP = 0x03,
+		RADEON_INIT_R300_CP = 0x04,
+		RADEON_INIT_R600_CP = 0x05
+	} func;
+	unsigned long sarea_priv_offset;
+	int is_pci;
+	int cp_mode;
+	int gart_size;
+	int ring_size;
+	int usec_timeout;
+
+	unsigned int fb_bpp;
+	unsigned int front_offset, front_pitch;
+	unsigned int back_offset, back_pitch;
+	unsigned int depth_bpp;
+	unsigned int depth_offset, depth_pitch;
+
+	unsigned long fb_offset;
+	unsigned long mmio_offset;
+	unsigned long ring_offset;
+	unsigned long ring_rptr_offset;
+	unsigned long buffers_offset;
+	unsigned long gart_textures_offset;
+} drm_radeon_init_t;
+
+typedef struct drm_radeon_cp_stop {
+	int flush;
+	int idle;
+} drm_radeon_cp_stop_t;
+
+typedef struct drm_radeon_fullscreen {
+	enum {
+		RADEON_INIT_FULLSCREEN = 0x01,
+		RADEON_CLEANUP_FULLSCREEN = 0x02
+	} func;
+} drm_radeon_fullscreen_t;
+
+#define CLEAR_X1	0
+#define CLEAR_Y1	1
+#define CLEAR_X2	2
+#define CLEAR_Y2	3
+#define CLEAR_DEPTH	4
+
+typedef union drm_radeon_clear_rect {
+	float f[5];
+	unsigned int ui[5];
+} drm_radeon_clear_rect_t;
+
+typedef struct drm_radeon_clear {
+	unsigned int flags;
+	unsigned int clear_color;
+	unsigned int clear_depth;
+	unsigned int color_mask;
+	unsigned int depth_mask;	/* misnamed field:  should be stencil */
+	drm_radeon_clear_rect_t __user *depth_boxes;
+} drm_radeon_clear_t;
+
+typedef struct drm_radeon_vertex {
+	int prim;
+	int idx;		/* Index of vertex buffer */
+	int count;		/* Number of vertices in buffer */
+	int discard;		/* Client finished with buffer? */
+} drm_radeon_vertex_t;
+
+typedef struct drm_radeon_indices {
+	int prim;
+	int idx;
+	int start;
+	int end;
+	int discard;		/* Client finished with buffer? */
+} drm_radeon_indices_t;
+
+/* v1.2 - obsoletes drm_radeon_vertex and drm_radeon_indices
+ *      - allows multiple primitives and state changes in a single ioctl
+ *      - supports driver change to emit native primitives
+ */
+typedef struct drm_radeon_vertex2 {
+	int idx;		/* Index of vertex buffer */
+	int discard;		/* Client finished with buffer? */
+	int nr_states;
+	drm_radeon_state_t __user *state;
+	int nr_prims;
+	drm_radeon_prim_t __user *prim;
+} drm_radeon_vertex2_t;
+
+/* v1.3 - obsoletes drm_radeon_vertex2
+ *      - allows arbitrarily large cliprect list
+ *      - allows updating of tcl packet, vector and scalar state
+ *      - allows memory-efficient description of state updates
+ *      - allows state to be emitted without a primitive
+ *           (for clears, ctx switches)
+ *      - allows more than one dma buffer to be referenced per ioctl
+ *      - supports tcl driver
+ *      - may be extended in future versions with new cmd types, packets
+ */
+typedef struct drm_radeon_cmd_buffer {
+	int bufsz;
+	char __user *buf;
+	int nbox;
+	struct drm_clip_rect __user *boxes;
+} drm_radeon_cmd_buffer_t;
+
+typedef struct drm_radeon_tex_image {
+	unsigned int x, y;	/* Blit coordinates */
+	unsigned int width, height;
+	const void __user *data;
+} drm_radeon_tex_image_t;
+
+typedef struct drm_radeon_texture {
+	unsigned int offset;
+	int pitch;
+	int format;
+	int width;		/* Texture image coordinates */
+	int height;
+	drm_radeon_tex_image_t __user *image;
+} drm_radeon_texture_t;
+
+typedef struct drm_radeon_stipple {
+	unsigned int __user *mask;
+} drm_radeon_stipple_t;
+
+typedef struct drm_radeon_indirect {
+	int idx;
+	int start;
+	int end;
+	int discard;
+} drm_radeon_indirect_t;
+
+/* enum for card type parameters */
+#define RADEON_CARD_PCI 0
+#define RADEON_CARD_AGP 1
+#define RADEON_CARD_PCIE 2
+
+/* 1.3: An ioctl to get parameters that aren't available to the 3d
+ * client any other way.
+ */
+#define RADEON_PARAM_GART_BUFFER_OFFSET    1	/* card offset of 1st GART buffer */
+#define RADEON_PARAM_LAST_FRAME            2
+#define RADEON_PARAM_LAST_DISPATCH         3
+#define RADEON_PARAM_LAST_CLEAR            4
+/* Added with DRM version 1.6. */
+#define RADEON_PARAM_IRQ_NR                5
+#define RADEON_PARAM_GART_BASE             6	/* card offset of GART base */
+/* Added with DRM version 1.8. */
+#define RADEON_PARAM_REGISTER_HANDLE       7	/* for drmMap() */
+#define RADEON_PARAM_STATUS_HANDLE         8
+#define RADEON_PARAM_SAREA_HANDLE          9
+#define RADEON_PARAM_GART_TEX_HANDLE       10
+#define RADEON_PARAM_SCRATCH_OFFSET        11
+#define RADEON_PARAM_CARD_TYPE             12
+#define RADEON_PARAM_VBLANK_CRTC           13   /* VBLANK CRTC */
+#define RADEON_PARAM_FB_LOCATION           14   /* FB location */
+#define RADEON_PARAM_NUM_GB_PIPES          15   /* num GB pipes */
+#define RADEON_PARAM_DEVICE_ID             16
+#define RADEON_PARAM_NUM_Z_PIPES           17   /* num Z pipes */
+
+typedef struct drm_radeon_getparam {
+	int param;
+	void __user *value;
+} drm_radeon_getparam_t;
+
+/* 1.6: Set up a memory manager for regions of shared memory:
+ */
+#define RADEON_MEM_REGION_GART 1
+#define RADEON_MEM_REGION_FB   2
+
+typedef struct drm_radeon_mem_alloc {
+	int region;
+	int alignment;
+	int size;
+	int __user *region_offset;	/* offset from start of fb or GART */
+} drm_radeon_mem_alloc_t;
+
+typedef struct drm_radeon_mem_free {
+	int region;
+	int region_offset;
+} drm_radeon_mem_free_t;
+
+typedef struct drm_radeon_mem_init_heap {
+	int region;
+	int size;
+	int start;
+} drm_radeon_mem_init_heap_t;
+
+/* 1.6: Userspace can request & wait on irq's:
+ */
+typedef struct drm_radeon_irq_emit {
+	int __user *irq_seq;
+} drm_radeon_irq_emit_t;
+
+typedef struct drm_radeon_irq_wait {
+	int irq_seq;
+} drm_radeon_irq_wait_t;
+
+/* 1.10: Clients tell the DRM where they think the framebuffer is located in
+ * the card's address space, via a new generic ioctl to set parameters
+ */
+
+typedef struct drm_radeon_setparam {
+	unsigned int param;
+	__s64 value;
+} drm_radeon_setparam_t;
+
+#define RADEON_SETPARAM_FB_LOCATION    1	/* determined framebuffer location */
+#define RADEON_SETPARAM_SWITCH_TILING  2	/* enable/disable color tiling */
+#define RADEON_SETPARAM_PCIGART_LOCATION 3	/* PCI Gart Location */
+#define RADEON_SETPARAM_NEW_MEMMAP 4		/* Use new memory map */
+#define RADEON_SETPARAM_PCIGART_TABLE_SIZE 5    /* PCI GART Table Size */
+#define RADEON_SETPARAM_VBLANK_CRTC 6           /* VBLANK CRTC */
+/* 1.14: Clients can allocate/free a surface
+ */
+typedef struct drm_radeon_surface_alloc {
+	unsigned int address;
+	unsigned int size;
+	unsigned int flags;
+} drm_radeon_surface_alloc_t;
+
+typedef struct drm_radeon_surface_free {
+	unsigned int address;
+} drm_radeon_surface_free_t;
+
+#define	DRM_RADEON_VBLANK_CRTC1		1
+#define	DRM_RADEON_VBLANK_CRTC2		2
+
+/*
+ * Kernel modesetting world below.
+ */
+#define RADEON_GEM_DOMAIN_CPU		0x1
+#define RADEON_GEM_DOMAIN_GTT		0x2
+#define RADEON_GEM_DOMAIN_VRAM		0x4
+
+struct drm_radeon_gem_info {
+	uint64_t	gart_size;
+	uint64_t	vram_size;
+	uint64_t	vram_visible;
+};
+
+#define RADEON_GEM_NO_BACKING_STORE 1
+
+struct drm_radeon_gem_create {
+	uint64_t	size;
+	uint64_t	alignment;
+	uint32_t	handle;
+	uint32_t	initial_domain;
+	uint32_t	flags;
+};
+
+#define RADEON_TILING_MACRO				0x1
+#define RADEON_TILING_MICRO				0x2
+#define RADEON_TILING_SWAP_16BIT			0x4
+#define RADEON_TILING_SWAP_32BIT			0x8
+/* this object requires a surface when mapped - i.e. front buffer */
+#define RADEON_TILING_SURFACE				0x10
+#define RADEON_TILING_MICRO_SQUARE			0x20
+#define RADEON_TILING_EG_BANKW_SHIFT			8
+#define RADEON_TILING_EG_BANKW_MASK			0xf
+#define RADEON_TILING_EG_BANKH_SHIFT			12
+#define RADEON_TILING_EG_BANKH_MASK			0xf
+#define RADEON_TILING_EG_MACRO_TILE_ASPECT_SHIFT	16
+#define RADEON_TILING_EG_MACRO_TILE_ASPECT_MASK		0xf
+#define RADEON_TILING_EG_TILE_SPLIT_SHIFT		24
+#define RADEON_TILING_EG_TILE_SPLIT_MASK		0xf
+#define RADEON_TILING_EG_STENCIL_TILE_SPLIT_SHIFT	28
+#define RADEON_TILING_EG_STENCIL_TILE_SPLIT_MASK	0xf
+
+struct drm_radeon_gem_set_tiling {
+	uint32_t	handle;
+	uint32_t	tiling_flags;
+	uint32_t	pitch;
+};
+
+struct drm_radeon_gem_get_tiling {
+	uint32_t	handle;
+	uint32_t	tiling_flags;
+	uint32_t	pitch;
+};
+
+struct drm_radeon_gem_mmap {
+	uint32_t	handle;
+	uint32_t	pad;
+	uint64_t	offset;
+	uint64_t	size;
+	uint64_t	addr_ptr;
+};
+
+struct drm_radeon_gem_set_domain {
+	uint32_t	handle;
+	uint32_t	read_domains;
+	uint32_t	write_domain;
+};
+
+struct drm_radeon_gem_wait_idle {
+	uint32_t	handle;
+	uint32_t	pad;
+};
+
+struct drm_radeon_gem_busy {
+	uint32_t	handle;
+	uint32_t        domain;
+};
+
+struct drm_radeon_gem_pread {
+	/** Handle for the object being read. */
+	uint32_t handle;
+	uint32_t pad;
+	/** Offset into the object to read from */
+	uint64_t offset;
+	/** Length of data to read */
+	uint64_t size;
+	/** Pointer to write the data into. */
+	/* void *, but pointers are not 32/64 compatible */
+	uint64_t data_ptr;
+};
+
+struct drm_radeon_gem_pwrite {
+	/** Handle for the object being written to. */
+	uint32_t handle;
+	uint32_t pad;
+	/** Offset into the object to write to */
+	uint64_t offset;
+	/** Length of data to write */
+	uint64_t size;
+	/** Pointer to read the data from. */
+	/* void *, but pointers are not 32/64 compatible */
+	uint64_t data_ptr;
+};
+
+#define RADEON_VA_MAP			1
+#define RADEON_VA_UNMAP			2
+
+#define RADEON_VA_RESULT_OK		0
+#define RADEON_VA_RESULT_ERROR		1
+#define RADEON_VA_RESULT_VA_EXIST	2
+
+#define RADEON_VM_PAGE_VALID		(1 << 0)
+#define RADEON_VM_PAGE_READABLE		(1 << 1)
+#define RADEON_VM_PAGE_WRITEABLE	(1 << 2)
+#define RADEON_VM_PAGE_SYSTEM		(1 << 3)
+#define RADEON_VM_PAGE_SNOOPED		(1 << 4)
+
+struct drm_radeon_gem_va {
+	uint32_t		handle;
+	uint32_t		operation;
+	uint32_t		vm_id;
+	uint32_t		flags;
+	uint64_t		offset;
+};
+
+#define RADEON_CHUNK_ID_RELOCS	0x01
+#define RADEON_CHUNK_ID_IB	0x02
+#define RADEON_CHUNK_ID_FLAGS	0x03
+#define RADEON_CHUNK_ID_CONST_IB	0x04
+
+/* The first dword of RADEON_CHUNK_ID_FLAGS is a uint32 of these flags: */
+#define RADEON_CS_KEEP_TILING_FLAGS 0x01
+#define RADEON_CS_USE_VM            0x02
+/* The second dword of RADEON_CHUNK_ID_FLAGS is a uint32 that sets the ring type */
+#define RADEON_CS_RING_GFX          0
+#define RADEON_CS_RING_COMPUTE      1
+/* The third dword of RADEON_CHUNK_ID_FLAGS is a sint32 that sets the priority */
+/* 0 = normal, + = higher priority, - = lower priority */
+
+struct drm_radeon_cs_chunk {
+	uint32_t		chunk_id;
+	uint32_t		length_dw;
+	uint64_t		chunk_data;
+};
+
+/* drm_radeon_cs_reloc.flags */
+#define RADEON_RELOC_DONT_SYNC		0x01
+
+struct drm_radeon_cs_reloc {
+	uint32_t		handle;
+	uint32_t		read_domains;
+	uint32_t		write_domain;
+	uint32_t		flags;
+};
+
+struct drm_radeon_cs {
+	uint32_t		num_chunks;
+	uint32_t		cs_id;
+	/* this points to uint64_t * which point to cs chunks */
+	uint64_t		chunks;
+	/* updates to the limits after this CS ioctl */
+	uint64_t		gart_limit;
+	uint64_t		vram_limit;
+};
+
+#define RADEON_INFO_DEVICE_ID		0x00
+#define RADEON_INFO_NUM_GB_PIPES	0x01
+#define RADEON_INFO_NUM_Z_PIPES 	0x02
+#define RADEON_INFO_ACCEL_WORKING	0x03
+#define RADEON_INFO_CRTC_FROM_ID	0x04
+#define RADEON_INFO_ACCEL_WORKING2	0x05
+#define RADEON_INFO_TILING_CONFIG	0x06
+#define RADEON_INFO_WANT_HYPERZ		0x07
+#define RADEON_INFO_WANT_CMASK		0x08 /* get access to CMASK on r300 */
+#define RADEON_INFO_CLOCK_CRYSTAL_FREQ	0x09 /* clock crystal frequency */
+#define RADEON_INFO_NUM_BACKENDS	0x0a /* DB/backends for r600+ - need for OQ */
+#define RADEON_INFO_NUM_TILE_PIPES	0x0b /* tile pipes for r600+ */
+#define RADEON_INFO_FUSION_GART_WORKING	0x0c /* fusion writes to GTT were broken before this */
+#define RADEON_INFO_BACKEND_MAP		0x0d /* pipe to backend map, needed by mesa */
+/* virtual address start, va < start are reserved by the kernel */
+#define RADEON_INFO_VA_START		0x0e
+/* maximum size of ib using the virtual memory cs */
+#define RADEON_INFO_IB_VM_MAX_SIZE	0x0f
+/* max pipes - needed for compute shaders */
+#define RADEON_INFO_MAX_PIPES		0x10
+
+struct drm_radeon_info {
+	uint32_t		request;
+	uint32_t		pad;
+	uint64_t		value;
+};
+
+#endif
diff --git a/include/drm/savage_drm.h b/include/drm/savage_drm.h
new file mode 100644
index 00000000..818d49be
--- /dev/null
+++ b/include/drm/savage_drm.h
@@ -0,0 +1,210 @@
+/* savage_drm.h -- Public header for the savage driver
+ *
+ * Copyright 2004  Felix Kuehling
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sub license,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT. IN NO EVENT SHALL FELIX KUEHLING BE LIABLE FOR
+ * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
+ * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef __SAVAGE_DRM_H__
+#define __SAVAGE_DRM_H__
+
+#ifndef __SAVAGE_SAREA_DEFINES__
+#define __SAVAGE_SAREA_DEFINES__
+
+/* 2 heaps (1 for card, 1 for agp), each divided into up to 128
+ * regions, subject to a minimum region size of (1<<16) == 64k.
+ *
+ * Clients may subdivide regions internally, but when sharing between
+ * clients, the region size is the minimum granularity.
+ */
+
+#define SAVAGE_CARD_HEAP		0
+#define SAVAGE_AGP_HEAP			1
+#define SAVAGE_NR_TEX_HEAPS		2
+#define SAVAGE_NR_TEX_REGIONS		16
+#define SAVAGE_LOG_MIN_TEX_REGION_SIZE	16
+
+#endif				/* __SAVAGE_SAREA_DEFINES__ */
+
+typedef struct _drm_savage_sarea {
+	/* LRU lists for texture memory in agp space and on the card.
+	 */
+	struct drm_tex_region texList[SAVAGE_NR_TEX_HEAPS][SAVAGE_NR_TEX_REGIONS +
+						      1];
+	unsigned int texAge[SAVAGE_NR_TEX_HEAPS];
+
+	/* Mechanism to validate card state.
+	 */
+	int ctxOwner;
+} drm_savage_sarea_t, *drm_savage_sarea_ptr;
+
+/* Savage-specific ioctls
+ */
+#define DRM_SAVAGE_BCI_INIT		0x00
+#define DRM_SAVAGE_BCI_CMDBUF           0x01
+#define DRM_SAVAGE_BCI_EVENT_EMIT	0x02
+#define DRM_SAVAGE_BCI_EVENT_WAIT	0x03
+
+#define DRM_IOCTL_SAVAGE_BCI_INIT		DRM_IOW( DRM_COMMAND_BASE + DRM_SAVAGE_BCI_INIT, drm_savage_init_t)
+#define DRM_IOCTL_SAVAGE_BCI_CMDBUF		DRM_IOW( DRM_COMMAND_BASE + DRM_SAVAGE_BCI_CMDBUF, drm_savage_cmdbuf_t)
+#define DRM_IOCTL_SAVAGE_BCI_EVENT_EMIT	DRM_IOWR(DRM_COMMAND_BASE + DRM_SAVAGE_BCI_EVENT_EMIT, drm_savage_event_emit_t)
+#define DRM_IOCTL_SAVAGE_BCI_EVENT_WAIT	DRM_IOW( DRM_COMMAND_BASE + DRM_SAVAGE_BCI_EVENT_WAIT, drm_savage_event_wait_t)
+
+#define SAVAGE_DMA_PCI	1
+#define SAVAGE_DMA_AGP	3
+typedef struct drm_savage_init {
+	enum {
+		SAVAGE_INIT_BCI = 1,
+		SAVAGE_CLEANUP_BCI = 2
+	} func;
+	unsigned int sarea_priv_offset;
+
+	/* some parameters */
+	unsigned int cob_size;
+	unsigned int bci_threshold_lo, bci_threshold_hi;
+	unsigned int dma_type;
+
+	/* frame buffer layout */
+	unsigned int fb_bpp;
+	unsigned int front_offset, front_pitch;
+	unsigned int back_offset, back_pitch;
+	unsigned int depth_bpp;
+	unsigned int depth_offset, depth_pitch;
+
+	/* local textures */
+	unsigned int texture_offset;
+	unsigned int texture_size;
+
+	/* physical locations of non-permanent maps */
+	unsigned long status_offset;
+	unsigned long buffers_offset;
+	unsigned long agp_textures_offset;
+	unsigned long cmd_dma_offset;
+} drm_savage_init_t;
+
+typedef union drm_savage_cmd_header drm_savage_cmd_header_t;
+typedef struct drm_savage_cmdbuf {
+	/* command buffer in client's address space */
+	drm_savage_cmd_header_t __user *cmd_addr;
+	unsigned int size;	/* size of the command buffer in 64bit units */
+
+	unsigned int dma_idx;	/* DMA buffer index to use */
+	int discard;		/* discard DMA buffer when done */
+	/* vertex buffer in client's address space */
+	unsigned int __user *vb_addr;
+	unsigned int vb_size;	/* size of client vertex buffer in bytes */
+	unsigned int vb_stride;	/* stride of vertices in 32bit words */
+	/* boxes in client's address space */
+	struct drm_clip_rect __user *box_addr;
+	unsigned int nbox;	/* number of clipping boxes */
+} drm_savage_cmdbuf_t;
+
+#define SAVAGE_WAIT_2D  0x1	/* wait for 2D idle before updating event tag */
+#define SAVAGE_WAIT_3D  0x2	/* wait for 3D idle before updating event tag */
+#define SAVAGE_WAIT_IRQ 0x4	/* emit or wait for IRQ, not implemented yet */
+typedef struct drm_savage_event {
+	unsigned int count;
+	unsigned int flags;
+} drm_savage_event_emit_t, drm_savage_event_wait_t;
+
+/* Commands for the cmdbuf ioctl
+ */
+#define SAVAGE_CMD_STATE	0	/* a range of state registers */
+#define SAVAGE_CMD_DMA_PRIM	1	/* vertices from DMA buffer */
+#define SAVAGE_CMD_VB_PRIM	2	/* vertices from client vertex buffer */
+#define SAVAGE_CMD_DMA_IDX	3	/* indexed vertices from DMA buffer */
+#define SAVAGE_CMD_VB_IDX	4	/* indexed vertices client vertex buffer */
+#define SAVAGE_CMD_CLEAR	5	/* clear buffers */
+#define SAVAGE_CMD_SWAP		6	/* swap buffers */
+
+/* Primitive types
+*/
+#define SAVAGE_PRIM_TRILIST	0	/* triangle list */
+#define SAVAGE_PRIM_TRISTRIP	1	/* triangle strip */
+#define SAVAGE_PRIM_TRIFAN	2	/* triangle fan */
+#define SAVAGE_PRIM_TRILIST_201	3	/* reorder verts for correct flat
+					 * shading on s3d */
+
+/* Skip flags (vertex format)
+ */
+#define SAVAGE_SKIP_Z		0x01
+#define SAVAGE_SKIP_W		0x02
+#define SAVAGE_SKIP_C0		0x04
+#define SAVAGE_SKIP_C1		0x08
+#define SAVAGE_SKIP_S0		0x10
+#define SAVAGE_SKIP_T0		0x20
+#define SAVAGE_SKIP_ST0		0x30
+#define SAVAGE_SKIP_S1		0x40
+#define SAVAGE_SKIP_T1		0x80
+#define SAVAGE_SKIP_ST1		0xc0
+#define SAVAGE_SKIP_ALL_S3D	0x3f
+#define SAVAGE_SKIP_ALL_S4	0xff
+
+/* Buffer names for clear command
+ */
+#define SAVAGE_FRONT		0x1
+#define SAVAGE_BACK		0x2
+#define SAVAGE_DEPTH		0x4
+
+/* 64-bit command header
+ */
+union drm_savage_cmd_header {
+	struct {
+		unsigned char cmd;	/* command */
+		unsigned char pad0;
+		unsigned short pad1;
+		unsigned short pad2;
+		unsigned short pad3;
+	} cmd;			/* generic */
+	struct {
+		unsigned char cmd;
+		unsigned char global;	/* need idle engine? */
+		unsigned short count;	/* number of consecutive registers */
+		unsigned short start;	/* first register */
+		unsigned short pad3;
+	} state;		/* SAVAGE_CMD_STATE */
+	struct {
+		unsigned char cmd;
+		unsigned char prim;	/* primitive type */
+		unsigned short skip;	/* vertex format (skip flags) */
+		unsigned short count;	/* number of vertices */
+		unsigned short start;	/* first vertex in DMA/vertex buffer */
+	} prim;			/* SAVAGE_CMD_DMA_PRIM, SAVAGE_CMD_VB_PRIM */
+	struct {
+		unsigned char cmd;
+		unsigned char prim;
+		unsigned short skip;
+		unsigned short count;	/* number of indices that follow */
+		unsigned short pad3;
+	} idx;			/* SAVAGE_CMD_DMA_IDX, SAVAGE_CMD_VB_IDX */
+	struct {
+		unsigned char cmd;
+		unsigned char pad0;
+		unsigned short pad1;
+		unsigned int flags;
+	} clear0;		/* SAVAGE_CMD_CLEAR */
+	struct {
+		unsigned int mask;
+		unsigned int value;
+	} clear1;		/* SAVAGE_CMD_CLEAR data */
+};
+
+#endif
diff --git a/include/drm/sis_drm.h b/include/drm/sis_drm.h
new file mode 100644
index 00000000..035b804d
--- /dev/null
+++ b/include/drm/sis_drm.h
@@ -0,0 +1,71 @@
+/* sis_drv.h -- Private header for sis driver -*- linux-c -*- */
+/*
+ * Copyright 2005 Eric Anholt
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#ifndef __SIS_DRM_H__
+#define __SIS_DRM_H__
+
+/* SiS specific ioctls */
+#define NOT_USED_0_3
+#define DRM_SIS_FB_ALLOC	0x04
+#define DRM_SIS_FB_FREE	        0x05
+#define NOT_USED_6_12
+#define DRM_SIS_AGP_INIT	0x13
+#define DRM_SIS_AGP_ALLOC	0x14
+#define DRM_SIS_AGP_FREE	0x15
+#define DRM_SIS_FB_INIT	        0x16
+
+#define DRM_IOCTL_SIS_FB_ALLOC		DRM_IOWR(DRM_COMMAND_BASE + DRM_SIS_FB_ALLOC, drm_sis_mem_t)
+#define DRM_IOCTL_SIS_FB_FREE		DRM_IOW( DRM_COMMAND_BASE + DRM_SIS_FB_FREE, drm_sis_mem_t)
+#define DRM_IOCTL_SIS_AGP_INIT		DRM_IOWR(DRM_COMMAND_BASE + DRM_SIS_AGP_INIT, drm_sis_agp_t)
+#define DRM_IOCTL_SIS_AGP_ALLOC		DRM_IOWR(DRM_COMMAND_BASE + DRM_SIS_AGP_ALLOC, drm_sis_mem_t)
+#define DRM_IOCTL_SIS_AGP_FREE		DRM_IOW( DRM_COMMAND_BASE + DRM_SIS_AGP_FREE, drm_sis_mem_t)
+#define DRM_IOCTL_SIS_FB_INIT		DRM_IOW( DRM_COMMAND_BASE + DRM_SIS_FB_INIT, drm_sis_fb_t)
+/*
+#define DRM_IOCTL_SIS_FLIP		DRM_IOW( 0x48, drm_sis_flip_t)
+#define DRM_IOCTL_SIS_FLIP_INIT		DRM_IO(  0x49)
+#define DRM_IOCTL_SIS_FLIP_FINAL	DRM_IO(  0x50)
+*/
+
+typedef struct {
+	int context;
+	unsigned int offset;
+	unsigned int size;
+	unsigned long free;
+} drm_sis_mem_t;
+
+typedef struct {
+	unsigned int offset, size;
+} drm_sis_agp_t;
+
+typedef struct {
+	unsigned int offset, size;
+} drm_sis_fb_t;
+
+struct sis_file_private {
+	struct list_head obj_list;
+};
+
+#endif				/* __SIS_DRM_H__ */
diff --git a/include/drm/ttm/ttm_bo_api.h b/include/drm/ttm/ttm_bo_api.h
new file mode 100644
index 00000000..974c8f80
--- /dev/null
+++ b/include/drm/ttm/ttm_bo_api.h
@@ -0,0 +1,732 @@
+/**************************************************************************
+ *
+ * Copyright (c) 2006-2009 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+/*
+ * Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
+ */
+
+#ifndef _TTM_BO_API_H_
+#define _TTM_BO_API_H_
+
+#include "drm_hashtab.h"
+#include <linux/kref.h>
+#include <linux/list.h>
+#include <linux/wait.h>
+#include <linux/mutex.h>
+#include <linux/mm.h>
+#include <linux/rbtree.h>
+#include <linux/bitmap.h>
+
+struct ttm_bo_device;
+
+struct drm_mm_node;
+
+
+/**
+ * struct ttm_placement
+ *
+ * @fpfn:		first valid page frame number to put the object
+ * @lpfn:		last valid page frame number to put the object
+ * @num_placement:	number of preferred placements
+ * @placement:		preferred placements
+ * @num_busy_placement:	number of preferred placements when need to evict buffer
+ * @busy_placement:	preferred placements when need to evict buffer
+ *
+ * Structure indicating the placement you request for an object.
+ */
+struct ttm_placement {
+	unsigned	fpfn;
+	unsigned	lpfn;
+	unsigned	num_placement;
+	const uint32_t	*placement;
+	unsigned	num_busy_placement;
+	const uint32_t	*busy_placement;
+};
+
+/**
+ * struct ttm_bus_placement
+ *
+ * @addr:		mapped virtual address
+ * @base:		bus base address
+ * @is_iomem:		is this io memory ?
+ * @size:		size in byte
+ * @offset:		offset from the base address
+ * @io_reserved_vm:     The VM system has a refcount in @io_reserved_count
+ * @io_reserved_count:  Refcounting the numbers of callers to ttm_mem_io_reserve
+ *
+ * Structure indicating the bus placement of an object.
+ */
+struct ttm_bus_placement {
+	void		*addr;
+	unsigned long	base;
+	unsigned long	size;
+	unsigned long	offset;
+	bool		is_iomem;
+	bool		io_reserved_vm;
+	uint64_t        io_reserved_count;
+};
+
+
+/**
+ * struct ttm_mem_reg
+ *
+ * @mm_node: Memory manager node.
+ * @size: Requested size of memory region.
+ * @num_pages: Actual size of memory region in pages.
+ * @page_alignment: Page alignment.
+ * @placement: Placement flags.
+ * @bus: Placement on io bus accessible to the CPU
+ *
+ * Structure indicating the placement and space resources used by a
+ * buffer object.
+ */
+
+struct ttm_mem_reg {
+	void *mm_node;
+	unsigned long start;
+	unsigned long size;
+	unsigned long num_pages;
+	uint32_t page_alignment;
+	uint32_t mem_type;
+	uint32_t placement;
+	struct ttm_bus_placement bus;
+};
+
+/**
+ * enum ttm_bo_type
+ *
+ * @ttm_bo_type_device:	These are 'normal' buffers that can
+ * be mmapped by user space. Each of these bos occupy a slot in the
+ * device address space, that can be used for normal vm operations.
+ *
+ * @ttm_bo_type_kernel: These buffers are like ttm_bo_type_device buffers,
+ * but they cannot be accessed from user-space. For kernel-only use.
+ */
+
+enum ttm_bo_type {
+	ttm_bo_type_device,
+	ttm_bo_type_kernel
+};
+
+struct ttm_tt;
+
+/**
+ * struct ttm_buffer_object
+ *
+ * @bdev: Pointer to the buffer object device structure.
+ * @buffer_start: The virtual user-space start address of ttm_bo_type_user
+ * buffers.
+ * @type: The bo type.
+ * @destroy: Destruction function. If NULL, kfree is used.
+ * @num_pages: Actual number of pages.
+ * @addr_space_offset: Address space offset.
+ * @acc_size: Accounted size for this object.
+ * @kref: Reference count of this buffer object. When this refcount reaches
+ * zero, the object is put on the delayed delete list.
+ * @list_kref: List reference count of this buffer object. This member is
+ * used to avoid destruction while the buffer object is still on a list.
+ * Lru lists may keep one refcount, the delayed delete list, and kref != 0
+ * keeps one refcount. When this refcount reaches zero,
+ * the object is destroyed.
+ * @event_queue: Queue for processes waiting on buffer object status change.
+ * @mem: structure describing current placement.
+ * @persistent_swap_storage: Usually the swap storage is deleted for buffers
+ * pinned in physical memory. If this behaviour is not desired, this member
+ * holds a pointer to a persistent shmem object.
+ * @ttm: TTM structure holding system pages.
+ * @evicted: Whether the object was evicted without user-space knowing.
+ * @cpu_writes: For synchronization. Number of cpu writers.
+ * @lru: List head for the lru list.
+ * @ddestroy: List head for the delayed destroy list.
+ * @swap: List head for swap LRU list.
+ * @val_seq: Sequence of the validation holding the @reserved lock.
+ * Used to avoid starvation when many processes compete to validate the
+ * buffer. This member is protected by the bo_device::lru_lock.
+ * @seq_valid: The value of @val_seq is valid. This value is protected by
+ * the bo_device::lru_lock.
+ * @reserved: Deadlock-free lock used for synchronization state transitions.
+ * @sync_obj_arg: Opaque argument to synchronization object function.
+ * @sync_obj: Pointer to a synchronization object.
+ * @priv_flags: Flags describing buffer object internal state.
+ * @vm_rb: Rb node for the vm rb tree.
+ * @vm_node: Address space manager node.
+ * @offset: The current GPU offset, which can have different meanings
+ * depending on the memory type. For SYSTEM type memory, it should be 0.
+ * @cur_placement: Hint of current placement.
+ *
+ * Base class for TTM buffer object, that deals with data placement and CPU
+ * mappings. GPU mappings are really up to the driver, but for simpler GPUs
+ * the driver can usually use the placement offset @offset directly as the
+ * GPU virtual address. For drivers implementing multiple
+ * GPU memory manager contexts, the driver should manage the address space
+ * in these contexts separately and use these objects to get the correct
+ * placement and caching for these GPU maps. This makes it possible to use
+ * these objects for even quite elaborate memory management schemes.
+ * The destroy member, the API visibility of this object makes it possible
+ * to derive driver specific types.
+ */
+
+struct ttm_buffer_object {
+	/**
+	 * Members constant at init.
+	 */
+
+	struct ttm_bo_global *glob;
+	struct ttm_bo_device *bdev;
+	unsigned long buffer_start;
+	enum ttm_bo_type type;
+	void (*destroy) (struct ttm_buffer_object *);
+	unsigned long num_pages;
+	uint64_t addr_space_offset;
+	size_t acc_size;
+
+	/**
+	* Members not needing protection.
+	*/
+
+	struct kref kref;
+	struct kref list_kref;
+	wait_queue_head_t event_queue;
+
+	/**
+	 * Members protected by the bo::reserved lock.
+	 */
+
+	struct ttm_mem_reg mem;
+	struct file *persistent_swap_storage;
+	struct ttm_tt *ttm;
+	bool evicted;
+
+	/**
+	 * Members protected by the bo::reserved lock only when written to.
+	 */
+
+	atomic_t cpu_writers;
+
+	/**
+	 * Members protected by the bdev::lru_lock.
+	 */
+
+	struct list_head lru;
+	struct list_head ddestroy;
+	struct list_head swap;
+	struct list_head io_reserve_lru;
+	uint32_t val_seq;
+	bool seq_valid;
+
+	/**
+	 * Members protected by the bdev::lru_lock
+	 * only when written to.
+	 */
+
+	atomic_t reserved;
+
+	/**
+	 * Members protected by struct buffer_object_device::fence_lock
+	 * In addition, setting sync_obj to anything else
+	 * than NULL requires bo::reserved to be held. This allows for
+	 * checking NULL while reserved but not holding the mentioned lock.
+	 */
+
+	void *sync_obj_arg;
+	void *sync_obj;
+	unsigned long priv_flags;
+
+	/**
+	 * Members protected by the bdev::vm_lock
+	 */
+
+	struct rb_node vm_rb;
+	struct drm_mm_node *vm_node;
+
+
+	/**
+	 * Special members that are protected by the reserve lock
+	 * and the bo::lock when written to. Can be read with
+	 * either of these locks held.
+	 */
+
+	unsigned long offset;
+	uint32_t cur_placement;
+};
+
+/**
+ * struct ttm_bo_kmap_obj
+ *
+ * @virtual: The current kernel virtual address.
+ * @page: The page when kmap'ing a single page.
+ * @bo_kmap_type: Type of bo_kmap.
+ *
+ * Object describing a kernel mapping. Since a TTM bo may be located
+ * in various memory types with various caching policies, the
+ * mapping can either be an ioremap, a vmap, a kmap or part of a
+ * premapped region.
+ */
+
+#define TTM_BO_MAP_IOMEM_MASK 0x80
+struct ttm_bo_kmap_obj {
+	void *virtual;
+	struct page *page;
+	enum {
+		ttm_bo_map_iomap        = 1 | TTM_BO_MAP_IOMEM_MASK,
+		ttm_bo_map_vmap         = 2,
+		ttm_bo_map_kmap         = 3,
+		ttm_bo_map_premapped    = 4 | TTM_BO_MAP_IOMEM_MASK,
+	} bo_kmap_type;
+	struct ttm_buffer_object *bo;
+};
+
+/**
+ * ttm_bo_reference - reference a struct ttm_buffer_object
+ *
+ * @bo: The buffer object.
+ *
+ * Returns a refcounted pointer to a buffer object.
+ */
+
+static inline struct ttm_buffer_object *
+ttm_bo_reference(struct ttm_buffer_object *bo)
+{
+	kref_get(&bo->kref);
+	return bo;
+}
+
+/**
+ * ttm_bo_wait - wait for buffer idle.
+ *
+ * @bo:  The buffer object.
+ * @interruptible:  Use interruptible wait.
+ * @no_wait:  Return immediately if buffer is busy.
+ *
+ * This function must be called with the bo::mutex held, and makes
+ * sure any previous rendering to the buffer is completed.
+ * Note: It might be necessary to block validations before the
+ * wait by reserving the buffer.
+ * Returns -EBUSY if no_wait is true and the buffer is busy.
+ * Returns -ERESTARTSYS if interrupted by a signal.
+ */
+extern int ttm_bo_wait(struct ttm_buffer_object *bo, bool lazy,
+		       bool interruptible, bool no_wait);
+/**
+ * ttm_bo_validate
+ *
+ * @bo: The buffer object.
+ * @placement: Proposed placement for the buffer object.
+ * @interruptible: Sleep interruptible if sleeping.
+ * @no_wait_reserve: Return immediately if other buffers are busy.
+ * @no_wait_gpu: Return immediately if the GPU is busy.
+ *
+ * Changes placement and caching policy of the buffer object
+ * according proposed placement.
+ * Returns
+ * -EINVAL on invalid proposed placement.
+ * -ENOMEM on out-of-memory condition.
+ * -EBUSY if no_wait is true and buffer busy.
+ * -ERESTARTSYS if interrupted by a signal.
+ */
+extern int ttm_bo_validate(struct ttm_buffer_object *bo,
+				struct ttm_placement *placement,
+				bool interruptible, bool no_wait_reserve,
+				bool no_wait_gpu);
+
+/**
+ * ttm_bo_unref
+ *
+ * @bo: The buffer object.
+ *
+ * Unreference and clear a pointer to a buffer object.
+ */
+extern void ttm_bo_unref(struct ttm_buffer_object **bo);
+
+
+/**
+ * ttm_bo_list_ref_sub
+ *
+ * @bo: The buffer object.
+ * @count: The number of references with which to decrease @bo::list_kref;
+ * @never_free: The refcount should not reach zero with this operation.
+ *
+ * Release @count lru list references to this buffer object.
+ */
+extern void ttm_bo_list_ref_sub(struct ttm_buffer_object *bo, int count,
+				bool never_free);
+
+/**
+ * ttm_bo_add_to_lru
+ *
+ * @bo: The buffer object.
+ *
+ * Add this bo to the relevant mem type lru and, if it's backed by
+ * system pages (ttms) to the swap list.
+ * This function must be called with struct ttm_bo_global::lru_lock held, and
+ * is typically called immediately prior to unreserving a bo.
+ */
+extern void ttm_bo_add_to_lru(struct ttm_buffer_object *bo);
+
+/**
+ * ttm_bo_del_from_lru
+ *
+ * @bo: The buffer object.
+ *
+ * Remove this bo from all lru lists used to lookup and reserve an object.
+ * This function must be called with struct ttm_bo_global::lru_lock held,
+ * and is usually called just immediately after the bo has been reserved to
+ * avoid recursive reservation from lru lists.
+ */
+extern int ttm_bo_del_from_lru(struct ttm_buffer_object *bo);
+
+
+/**
+ * ttm_bo_lock_delayed_workqueue
+ *
+ * Prevent the delayed workqueue from running.
+ * Returns
+ * True if the workqueue was queued at the time
+ */
+extern int ttm_bo_lock_delayed_workqueue(struct ttm_bo_device *bdev);
+
+/**
+ * ttm_bo_unlock_delayed_workqueue
+ *
+ * Allows the delayed workqueue to run.
+ */
+extern void ttm_bo_unlock_delayed_workqueue(struct ttm_bo_device *bdev,
+					    int resched);
+
+/**
+ * ttm_bo_synccpu_write_grab
+ *
+ * @bo: The buffer object:
+ * @no_wait: Return immediately if buffer is busy.
+ *
+ * Synchronizes a buffer object for CPU RW access. This means
+ * blocking command submission that affects the buffer and
+ * waiting for buffer idle. This lock is recursive.
+ * Returns
+ * -EBUSY if the buffer is busy and no_wait is true.
+ * -ERESTARTSYS if interrupted by a signal.
+ */
+extern int
+ttm_bo_synccpu_write_grab(struct ttm_buffer_object *bo, bool no_wait);
+
+/**
+ * ttm_bo_synccpu_write_release:
+ *
+ * @bo : The buffer object.
+ *
+ * Releases a synccpu lock.
+ */
+extern void ttm_bo_synccpu_write_release(struct ttm_buffer_object *bo);
+
+/**
+ * ttm_bo_acc_size
+ *
+ * @bdev: Pointer to a ttm_bo_device struct.
+ * @bo_size: size of the buffer object in byte.
+ * @struct_size: size of the structure holding buffer object datas
+ *
+ * Returns size to account for a buffer object
+ */
+size_t ttm_bo_acc_size(struct ttm_bo_device *bdev,
+		       unsigned long bo_size,
+		       unsigned struct_size);
+size_t ttm_bo_dma_acc_size(struct ttm_bo_device *bdev,
+			   unsigned long bo_size,
+			   unsigned struct_size);
+
+/**
+ * ttm_bo_init
+ *
+ * @bdev: Pointer to a ttm_bo_device struct.
+ * @bo: Pointer to a ttm_buffer_object to be initialized.
+ * @size: Requested size of buffer object.
+ * @type: Requested type of buffer object.
+ * @flags: Initial placement flags.
+ * @page_alignment: Data alignment in pages.
+ * @buffer_start: Virtual address of user space data backing a
+ * user buffer object.
+ * @interruptible: If needing to sleep to wait for GPU resources,
+ * sleep interruptible.
+ * @persistent_swap_storage: Usually the swap storage is deleted for buffers
+ * pinned in physical memory. If this behaviour is not desired, this member
+ * holds a pointer to a persistent shmem object. Typically, this would
+ * point to the shmem object backing a GEM object if TTM is used to back a
+ * GEM user interface.
+ * @acc_size: Accounted size for this object.
+ * @destroy: Destroy function. Use NULL for kfree().
+ *
+ * This function initializes a pre-allocated struct ttm_buffer_object.
+ * As this object may be part of a larger structure, this function,
+ * together with the @destroy function,
+ * enables driver-specific objects derived from a ttm_buffer_object.
+ * On successful return, the object kref and list_kref are set to 1.
+ * If a failure occurs, the function will call the @destroy function, or
+ * kfree() if @destroy is NULL. Thus, after a failure, dereferencing @bo is
+ * illegal and will likely cause memory corruption.
+ *
+ * Returns
+ * -ENOMEM: Out of memory.
+ * -EINVAL: Invalid placement flags.
+ * -ERESTARTSYS: Interrupted by signal while sleeping waiting for resources.
+ */
+
+extern int ttm_bo_init(struct ttm_bo_device *bdev,
+			struct ttm_buffer_object *bo,
+			unsigned long size,
+			enum ttm_bo_type type,
+			struct ttm_placement *placement,
+			uint32_t page_alignment,
+			unsigned long buffer_start,
+			bool interrubtible,
+			struct file *persistent_swap_storage,
+			size_t acc_size,
+			void (*destroy) (struct ttm_buffer_object *));
+
+/**
+ * ttm_bo_synccpu_object_init
+ *
+ * @bdev: Pointer to a ttm_bo_device struct.
+ * @bo: Pointer to a ttm_buffer_object to be initialized.
+ * @size: Requested size of buffer object.
+ * @type: Requested type of buffer object.
+ * @flags: Initial placement flags.
+ * @page_alignment: Data alignment in pages.
+ * @buffer_start: Virtual address of user space data backing a
+ * user buffer object.
+ * @interruptible: If needing to sleep while waiting for GPU resources,
+ * sleep interruptible.
+ * @persistent_swap_storage: Usually the swap storage is deleted for buffers
+ * pinned in physical memory. If this behaviour is not desired, this member
+ * holds a pointer to a persistent shmem object. Typically, this would
+ * point to the shmem object backing a GEM object if TTM is used to back a
+ * GEM user interface.
+ * @p_bo: On successful completion *p_bo points to the created object.
+ *
+ * This function allocates a ttm_buffer_object, and then calls ttm_bo_init
+ * on that object. The destroy function is set to kfree().
+ * Returns
+ * -ENOMEM: Out of memory.
+ * -EINVAL: Invalid placement flags.
+ * -ERESTARTSYS: Interrupted by signal while waiting for resources.
+ */
+
+extern int ttm_bo_create(struct ttm_bo_device *bdev,
+				unsigned long size,
+				enum ttm_bo_type type,
+				struct ttm_placement *placement,
+				uint32_t page_alignment,
+				unsigned long buffer_start,
+				bool interruptible,
+				struct file *persistent_swap_storage,
+				struct ttm_buffer_object **p_bo);
+
+/**
+ * ttm_bo_check_placement
+ *
+ * @bo:		the buffer object.
+ * @placement:	placements
+ *
+ * Performs minimal validity checking on an intended change of
+ * placement flags.
+ * Returns
+ * -EINVAL: Intended change is invalid or not allowed.
+ */
+extern int ttm_bo_check_placement(struct ttm_buffer_object *bo,
+					struct ttm_placement *placement);
+
+/**
+ * ttm_bo_init_mm
+ *
+ * @bdev: Pointer to a ttm_bo_device struct.
+ * @mem_type: The memory type.
+ * @p_size: size managed area in pages.
+ *
+ * Initialize a manager for a given memory type.
+ * Note: if part of driver firstopen, it must be protected from a
+ * potentially racing lastclose.
+ * Returns:
+ * -EINVAL: invalid size or memory type.
+ * -ENOMEM: Not enough memory.
+ * May also return driver-specified errors.
+ */
+
+extern int ttm_bo_init_mm(struct ttm_bo_device *bdev, unsigned type,
+				unsigned long p_size);
+/**
+ * ttm_bo_clean_mm
+ *
+ * @bdev: Pointer to a ttm_bo_device struct.
+ * @mem_type: The memory type.
+ *
+ * Take down a manager for a given memory type after first walking
+ * the LRU list to evict any buffers left alive.
+ *
+ * Normally, this function is part of lastclose() or unload(), and at that
+ * point there shouldn't be any buffers left created by user-space, since
+ * there should've been removed by the file descriptor release() method.
+ * However, before this function is run, make sure to signal all sync objects,
+ * and verify that the delayed delete queue is empty. The driver must also
+ * make sure that there are no NO_EVICT buffers present in this memory type
+ * when the call is made.
+ *
+ * If this function is part of a VT switch, the caller must make sure that
+ * there are no appications currently validating buffers before this
+ * function is called. The caller can do that by first taking the
+ * struct ttm_bo_device::ttm_lock in write mode.
+ *
+ * Returns:
+ * -EINVAL: invalid or uninitialized memory type.
+ * -EBUSY: There are still buffers left in this memory type.
+ */
+
+extern int ttm_bo_clean_mm(struct ttm_bo_device *bdev, unsigned mem_type);
+
+/**
+ * ttm_bo_evict_mm
+ *
+ * @bdev: Pointer to a ttm_bo_device struct.
+ * @mem_type: The memory type.
+ *
+ * Evicts all buffers on the lru list of the memory type.
+ * This is normally part of a VT switch or an
+ * out-of-memory-space-due-to-fragmentation handler.
+ * The caller must make sure that there are no other processes
+ * currently validating buffers, and can do that by taking the
+ * struct ttm_bo_device::ttm_lock in write mode.
+ *
+ * Returns:
+ * -EINVAL: Invalid or uninitialized memory type.
+ * -ERESTARTSYS: The call was interrupted by a signal while waiting to
+ * evict a buffer.
+ */
+
+extern int ttm_bo_evict_mm(struct ttm_bo_device *bdev, unsigned mem_type);
+
+/**
+ * ttm_kmap_obj_virtual
+ *
+ * @map: A struct ttm_bo_kmap_obj returned from ttm_bo_kmap.
+ * @is_iomem: Pointer to an integer that on return indicates 1 if the
+ * virtual map is io memory, 0 if normal memory.
+ *
+ * Returns the virtual address of a buffer object area mapped by ttm_bo_kmap.
+ * If *is_iomem is 1 on return, the virtual address points to an io memory area,
+ * that should strictly be accessed by the iowriteXX() and similar functions.
+ */
+
+static inline void *ttm_kmap_obj_virtual(struct ttm_bo_kmap_obj *map,
+					 bool *is_iomem)
+{
+	*is_iomem = !!(map->bo_kmap_type & TTM_BO_MAP_IOMEM_MASK);
+	return map->virtual;
+}
+
+/**
+ * ttm_bo_kmap
+ *
+ * @bo: The buffer object.
+ * @start_page: The first page to map.
+ * @num_pages: Number of pages to map.
+ * @map: pointer to a struct ttm_bo_kmap_obj representing the map.
+ *
+ * Sets up a kernel virtual mapping, using ioremap, vmap or kmap to the
+ * data in the buffer object. The ttm_kmap_obj_virtual function can then be
+ * used to obtain a virtual address to the data.
+ *
+ * Returns
+ * -ENOMEM: Out of memory.
+ * -EINVAL: Invalid range.
+ */
+
+extern int ttm_bo_kmap(struct ttm_buffer_object *bo, unsigned long start_page,
+		       unsigned long num_pages, struct ttm_bo_kmap_obj *map);
+
+/**
+ * ttm_bo_kunmap
+ *
+ * @map: Object describing the map to unmap.
+ *
+ * Unmaps a kernel map set up by ttm_bo_kmap.
+ */
+
+extern void ttm_bo_kunmap(struct ttm_bo_kmap_obj *map);
+
+/**
+ * ttm_fbdev_mmap - mmap fbdev memory backed by a ttm buffer object.
+ *
+ * @vma:       vma as input from the fbdev mmap method.
+ * @bo:        The bo backing the address space. The address space will
+ * have the same size as the bo, and start at offset 0.
+ *
+ * This function is intended to be called by the fbdev mmap method
+ * if the fbdev address space is to be backed by a bo.
+ */
+
+extern int ttm_fbdev_mmap(struct vm_area_struct *vma,
+			  struct ttm_buffer_object *bo);
+
+/**
+ * ttm_bo_mmap - mmap out of the ttm device address space.
+ *
+ * @filp:      filp as input from the mmap method.
+ * @vma:       vma as input from the mmap method.
+ * @bdev:      Pointer to the ttm_bo_device with the address space manager.
+ *
+ * This function is intended to be called by the device mmap method.
+ * if the device address space is to be backed by the bo manager.
+ */
+
+extern int ttm_bo_mmap(struct file *filp, struct vm_area_struct *vma,
+		       struct ttm_bo_device *bdev);
+
+/**
+ * ttm_bo_io
+ *
+ * @bdev:      Pointer to the struct ttm_bo_device.
+ * @filp:      Pointer to the struct file attempting to read / write.
+ * @wbuf:      User-space pointer to address of buffer to write. NULL on read.
+ * @rbuf:      User-space pointer to address of buffer to read into.
+ * Null on write.
+ * @count:     Number of bytes to read / write.
+ * @f_pos:     Pointer to current file position.
+ * @write:     1 for read, 0 for write.
+ *
+ * This function implements read / write into ttm buffer objects, and is
+ * intended to
+ * be called from the fops::read and fops::write method.
+ * Returns:
+ * See man (2) write, man(2) read. In particular,
+ * the function may return -ERESTARTSYS if
+ * interrupted by a signal.
+ */
+
+extern ssize_t ttm_bo_io(struct ttm_bo_device *bdev, struct file *filp,
+			 const char __user *wbuf, char __user *rbuf,
+			 size_t count, loff_t *f_pos, bool write);
+
+extern void ttm_bo_swapout_all(struct ttm_bo_device *bdev);
+
+#endif
diff --git a/include/drm/ttm/ttm_bo_driver.h b/include/drm/ttm/ttm_bo_driver.h
new file mode 100644
index 00000000..d43e8923
--- /dev/null
+++ b/include/drm/ttm/ttm_bo_driver.h
@@ -0,0 +1,1037 @@
+/**************************************************************************
+ *
+ * Copyright (c) 2006-2009 Vmware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+/*
+ * Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
+ */
+#ifndef _TTM_BO_DRIVER_H_
+#define _TTM_BO_DRIVER_H_
+
+#include "ttm/ttm_bo_api.h"
+#include "ttm/ttm_memory.h"
+#include "ttm/ttm_module.h"
+#include "drm_mm.h"
+#include "drm_global.h"
+#include "linux/workqueue.h"
+#include "linux/fs.h"
+#include "linux/spinlock.h"
+
+struct ttm_backend;
+
+struct ttm_backend_func {
+	/**
+	 * struct ttm_backend_func member bind
+	 *
+	 * @ttm: Pointer to a struct ttm_tt.
+	 * @bo_mem: Pointer to a struct ttm_mem_reg describing the
+	 * memory type and location for binding.
+	 *
+	 * Bind the backend pages into the aperture in the location
+	 * indicated by @bo_mem. This function should be able to handle
+	 * differences between aperture and system page sizes.
+	 */
+	int (*bind) (struct ttm_tt *ttm, struct ttm_mem_reg *bo_mem);
+
+	/**
+	 * struct ttm_backend_func member unbind
+	 *
+	 * @ttm: Pointer to a struct ttm_tt.
+	 *
+	 * Unbind previously bound backend pages. This function should be
+	 * able to handle differences between aperture and system page sizes.
+	 */
+	int (*unbind) (struct ttm_tt *ttm);
+
+	/**
+	 * struct ttm_backend_func member destroy
+	 *
+	 * @ttm: Pointer to a struct ttm_tt.
+	 *
+	 * Destroy the backend. This will be call back from ttm_tt_destroy so
+	 * don't call ttm_tt_destroy from the callback or infinite loop.
+	 */
+	void (*destroy) (struct ttm_tt *ttm);
+};
+
+#define TTM_PAGE_FLAG_WRITE           (1 << 3)
+#define TTM_PAGE_FLAG_SWAPPED         (1 << 4)
+#define TTM_PAGE_FLAG_PERSISTENT_SWAP (1 << 5)
+#define TTM_PAGE_FLAG_ZERO_ALLOC      (1 << 6)
+#define TTM_PAGE_FLAG_DMA32           (1 << 7)
+
+enum ttm_caching_state {
+	tt_uncached,
+	tt_wc,
+	tt_cached
+};
+
+/**
+ * struct ttm_tt
+ *
+ * @bdev: Pointer to a struct ttm_bo_device.
+ * @func: Pointer to a struct ttm_backend_func that describes
+ * the backend methods.
+ * @dummy_read_page: Page to map where the ttm_tt page array contains a NULL
+ * pointer.
+ * @pages: Array of pages backing the data.
+ * @num_pages: Number of pages in the page array.
+ * @bdev: Pointer to the current struct ttm_bo_device.
+ * @be: Pointer to the ttm backend.
+ * @swap_storage: Pointer to shmem struct file for swap storage.
+ * @caching_state: The current caching state of the pages.
+ * @state: The current binding state of the pages.
+ *
+ * This is a structure holding the pages, caching- and aperture binding
+ * status for a buffer object that isn't backed by fixed (VRAM / AGP)
+ * memory.
+ */
+
+struct ttm_tt {
+	struct ttm_bo_device *bdev;
+	struct ttm_backend_func *func;
+	struct page *dummy_read_page;
+	struct page **pages;
+	uint32_t page_flags;
+	unsigned long num_pages;
+	struct ttm_bo_global *glob;
+	struct ttm_backend *be;
+	struct file *swap_storage;
+	enum ttm_caching_state caching_state;
+	enum {
+		tt_bound,
+		tt_unbound,
+		tt_unpopulated,
+	} state;
+};
+
+/**
+ * struct ttm_dma_tt
+ *
+ * @ttm: Base ttm_tt struct.
+ * @dma_address: The DMA (bus) addresses of the pages
+ * @pages_list: used by some page allocation backend
+ *
+ * This is a structure holding the pages, caching- and aperture binding
+ * status for a buffer object that isn't backed by fixed (VRAM / AGP)
+ * memory.
+ */
+struct ttm_dma_tt {
+	struct ttm_tt ttm;
+	dma_addr_t *dma_address;
+	struct list_head pages_list;
+};
+
+#define TTM_MEMTYPE_FLAG_FIXED         (1 << 0)	/* Fixed (on-card) PCI memory */
+#define TTM_MEMTYPE_FLAG_MAPPABLE      (1 << 1)	/* Memory mappable */
+#define TTM_MEMTYPE_FLAG_CMA           (1 << 3)	/* Can't map aperture */
+
+struct ttm_mem_type_manager;
+
+struct ttm_mem_type_manager_func {
+	/**
+	 * struct ttm_mem_type_manager member init
+	 *
+	 * @man: Pointer to a memory type manager.
+	 * @p_size: Implementation dependent, but typically the size of the
+	 * range to be managed in pages.
+	 *
+	 * Called to initialize a private range manager. The function is
+	 * expected to initialize the man::priv member.
+	 * Returns 0 on success, negative error code on failure.
+	 */
+	int  (*init)(struct ttm_mem_type_manager *man, unsigned long p_size);
+
+	/**
+	 * struct ttm_mem_type_manager member takedown
+	 *
+	 * @man: Pointer to a memory type manager.
+	 *
+	 * Called to undo the setup done in init. All allocated resources
+	 * should be freed.
+	 */
+	int  (*takedown)(struct ttm_mem_type_manager *man);
+
+	/**
+	 * struct ttm_mem_type_manager member get_node
+	 *
+	 * @man: Pointer to a memory type manager.
+	 * @bo: Pointer to the buffer object we're allocating space for.
+	 * @placement: Placement details.
+	 * @mem: Pointer to a struct ttm_mem_reg to be filled in.
+	 *
+	 * This function should allocate space in the memory type managed
+	 * by @man. Placement details if
+	 * applicable are given by @placement. If successful,
+	 * @mem::mm_node should be set to a non-null value, and
+	 * @mem::start should be set to a value identifying the beginning
+	 * of the range allocated, and the function should return zero.
+	 * If the memory region accommodate the buffer object, @mem::mm_node
+	 * should be set to NULL, and the function should return 0.
+	 * If a system error occurred, preventing the request to be fulfilled,
+	 * the function should return a negative error code.
+	 *
+	 * Note that @mem::mm_node will only be dereferenced by
+	 * struct ttm_mem_type_manager functions and optionally by the driver,
+	 * which has knowledge of the underlying type.
+	 *
+	 * This function may not be called from within atomic context, so
+	 * an implementation can and must use either a mutex or a spinlock to
+	 * protect any data structures managing the space.
+	 */
+	int  (*get_node)(struct ttm_mem_type_manager *man,
+			 struct ttm_buffer_object *bo,
+			 struct ttm_placement *placement,
+			 struct ttm_mem_reg *mem);
+
+	/**
+	 * struct ttm_mem_type_manager member put_node
+	 *
+	 * @man: Pointer to a memory type manager.
+	 * @mem: Pointer to a struct ttm_mem_reg to be filled in.
+	 *
+	 * This function frees memory type resources previously allocated
+	 * and that are identified by @mem::mm_node and @mem::start. May not
+	 * be called from within atomic context.
+	 */
+	void (*put_node)(struct ttm_mem_type_manager *man,
+			 struct ttm_mem_reg *mem);
+
+	/**
+	 * struct ttm_mem_type_manager member debug
+	 *
+	 * @man: Pointer to a memory type manager.
+	 * @prefix: Prefix to be used in printout to identify the caller.
+	 *
+	 * This function is called to print out the state of the memory
+	 * type manager to aid debugging of out-of-memory conditions.
+	 * It may not be called from within atomic context.
+	 */
+	void (*debug)(struct ttm_mem_type_manager *man, const char *prefix);
+};
+
+/**
+ * struct ttm_mem_type_manager
+ *
+ * @has_type: The memory type has been initialized.
+ * @use_type: The memory type is enabled.
+ * @flags: TTM_MEMTYPE_XX flags identifying the traits of the memory
+ * managed by this memory type.
+ * @gpu_offset: If used, the GPU offset of the first managed page of
+ * fixed memory or the first managed location in an aperture.
+ * @size: Size of the managed region.
+ * @available_caching: A mask of available caching types, TTM_PL_FLAG_XX,
+ * as defined in ttm_placement_common.h
+ * @default_caching: The default caching policy used for a buffer object
+ * placed in this memory type if the user doesn't provide one.
+ * @func: structure pointer implementing the range manager. See above
+ * @priv: Driver private closure for @func.
+ * @io_reserve_mutex: Mutex optionally protecting shared io_reserve structures
+ * @use_io_reserve_lru: Use an lru list to try to unreserve io_mem_regions
+ * reserved by the TTM vm system.
+ * @io_reserve_lru: Optional lru list for unreserving io mem regions.
+ * @io_reserve_fastpath: Only use bdev::driver::io_mem_reserve to obtain
+ * static information. bdev::driver::io_mem_free is never used.
+ * @lru: The lru list for this memory type.
+ *
+ * This structure is used to identify and manage memory types for a device.
+ * It's set up by the ttm_bo_driver::init_mem_type method.
+ */
+
+
+
+struct ttm_mem_type_manager {
+	struct ttm_bo_device *bdev;
+
+	/*
+	 * No protection. Constant from start.
+	 */
+
+	bool has_type;
+	bool use_type;
+	uint32_t flags;
+	unsigned long gpu_offset;
+	uint64_t size;
+	uint32_t available_caching;
+	uint32_t default_caching;
+	const struct ttm_mem_type_manager_func *func;
+	void *priv;
+	struct mutex io_reserve_mutex;
+	bool use_io_reserve_lru;
+	bool io_reserve_fastpath;
+
+	/*
+	 * Protected by @io_reserve_mutex:
+	 */
+
+	struct list_head io_reserve_lru;
+
+	/*
+	 * Protected by the global->lru_lock.
+	 */
+
+	struct list_head lru;
+};
+
+/**
+ * struct ttm_bo_driver
+ *
+ * @create_ttm_backend_entry: Callback to create a struct ttm_backend.
+ * @invalidate_caches: Callback to invalidate read caches when a buffer object
+ * has been evicted.
+ * @init_mem_type: Callback to initialize a struct ttm_mem_type_manager
+ * structure.
+ * @evict_flags: Callback to obtain placement flags when a buffer is evicted.
+ * @move: Callback for a driver to hook in accelerated functions to
+ * move a buffer.
+ * If set to NULL, a potentially slow memcpy() move is used.
+ * @sync_obj_signaled: See ttm_fence_api.h
+ * @sync_obj_wait: See ttm_fence_api.h
+ * @sync_obj_flush: See ttm_fence_api.h
+ * @sync_obj_unref: See ttm_fence_api.h
+ * @sync_obj_ref: See ttm_fence_api.h
+ */
+
+struct ttm_bo_driver {
+	/**
+	 * ttm_tt_create
+	 *
+	 * @bdev: pointer to a struct ttm_bo_device:
+	 * @size: Size of the data needed backing.
+	 * @page_flags: Page flags as identified by TTM_PAGE_FLAG_XX flags.
+	 * @dummy_read_page: See struct ttm_bo_device.
+	 *
+	 * Create a struct ttm_tt to back data with system memory pages.
+	 * No pages are actually allocated.
+	 * Returns:
+	 * NULL: Out of memory.
+	 */
+	struct ttm_tt *(*ttm_tt_create)(struct ttm_bo_device *bdev,
+					unsigned long size,
+					uint32_t page_flags,
+					struct page *dummy_read_page);
+
+	/**
+	 * ttm_tt_populate
+	 *
+	 * @ttm: The struct ttm_tt to contain the backing pages.
+	 *
+	 * Allocate all backing pages
+	 * Returns:
+	 * -ENOMEM: Out of memory.
+	 */
+	int (*ttm_tt_populate)(struct ttm_tt *ttm);
+
+	/**
+	 * ttm_tt_unpopulate
+	 *
+	 * @ttm: The struct ttm_tt to contain the backing pages.
+	 *
+	 * Free all backing page
+	 */
+	void (*ttm_tt_unpopulate)(struct ttm_tt *ttm);
+
+	/**
+	 * struct ttm_bo_driver member invalidate_caches
+	 *
+	 * @bdev: the buffer object device.
+	 * @flags: new placement of the rebound buffer object.
+	 *
+	 * A previosly evicted buffer has been rebound in a
+	 * potentially new location. Tell the driver that it might
+	 * consider invalidating read (texture) caches on the next command
+	 * submission as a consequence.
+	 */
+
+	int (*invalidate_caches) (struct ttm_bo_device *bdev, uint32_t flags);
+	int (*init_mem_type) (struct ttm_bo_device *bdev, uint32_t type,
+			      struct ttm_mem_type_manager *man);
+	/**
+	 * struct ttm_bo_driver member evict_flags:
+	 *
+	 * @bo: the buffer object to be evicted
+	 *
+	 * Return the bo flags for a buffer which is not mapped to the hardware.
+	 * These will be placed in proposed_flags so that when the move is
+	 * finished, they'll end up in bo->mem.flags
+	 */
+
+	 void(*evict_flags) (struct ttm_buffer_object *bo,
+				struct ttm_placement *placement);
+	/**
+	 * struct ttm_bo_driver member move:
+	 *
+	 * @bo: the buffer to move
+	 * @evict: whether this motion is evicting the buffer from
+	 * the graphics address space
+	 * @interruptible: Use interruptible sleeps if possible when sleeping.
+	 * @no_wait: whether this should give up and return -EBUSY
+	 * if this move would require sleeping
+	 * @new_mem: the new memory region receiving the buffer
+	 *
+	 * Move a buffer between two memory regions.
+	 */
+	int (*move) (struct ttm_buffer_object *bo,
+		     bool evict, bool interruptible,
+		     bool no_wait_reserve, bool no_wait_gpu,
+		     struct ttm_mem_reg *new_mem);
+
+	/**
+	 * struct ttm_bo_driver_member verify_access
+	 *
+	 * @bo: Pointer to a buffer object.
+	 * @filp: Pointer to a struct file trying to access the object.
+	 *
+	 * Called from the map / write / read methods to verify that the
+	 * caller is permitted to access the buffer object.
+	 * This member may be set to NULL, which will refuse this kind of
+	 * access for all buffer objects.
+	 * This function should return 0 if access is granted, -EPERM otherwise.
+	 */
+	int (*verify_access) (struct ttm_buffer_object *bo,
+			      struct file *filp);
+
+	/**
+	 * In case a driver writer dislikes the TTM fence objects,
+	 * the driver writer can replace those with sync objects of
+	 * his / her own. If it turns out that no driver writer is
+	 * using these. I suggest we remove these hooks and plug in
+	 * fences directly. The bo driver needs the following functionality:
+	 * See the corresponding functions in the fence object API
+	 * documentation.
+	 */
+
+	bool (*sync_obj_signaled) (void *sync_obj, void *sync_arg);
+	int (*sync_obj_wait) (void *sync_obj, void *sync_arg,
+			      bool lazy, bool interruptible);
+	int (*sync_obj_flush) (void *sync_obj, void *sync_arg);
+	void (*sync_obj_unref) (void **sync_obj);
+	void *(*sync_obj_ref) (void *sync_obj);
+
+	/* hook to notify driver about a driver move so it
+	 * can do tiling things */
+	void (*move_notify)(struct ttm_buffer_object *bo,
+			    struct ttm_mem_reg *new_mem);
+	/* notify the driver we are taking a fault on this BO
+	 * and have reserved it */
+	int (*fault_reserve_notify)(struct ttm_buffer_object *bo);
+
+	/**
+	 * notify the driver that we're about to swap out this bo
+	 */
+	void (*swap_notify) (struct ttm_buffer_object *bo);
+
+	/**
+	 * Driver callback on when mapping io memory (for bo_move_memcpy
+	 * for instance). TTM will take care to call io_mem_free whenever
+	 * the mapping is not use anymore. io_mem_reserve & io_mem_free
+	 * are balanced.
+	 */
+	int (*io_mem_reserve)(struct ttm_bo_device *bdev, struct ttm_mem_reg *mem);
+	void (*io_mem_free)(struct ttm_bo_device *bdev, struct ttm_mem_reg *mem);
+};
+
+/**
+ * struct ttm_bo_global_ref - Argument to initialize a struct ttm_bo_global.
+ */
+
+struct ttm_bo_global_ref {
+	struct drm_global_reference ref;
+	struct ttm_mem_global *mem_glob;
+};
+
+/**
+ * struct ttm_bo_global - Buffer object driver global data.
+ *
+ * @mem_glob: Pointer to a struct ttm_mem_global object for accounting.
+ * @dummy_read_page: Pointer to a dummy page used for mapping requests
+ * of unpopulated pages.
+ * @shrink: A shrink callback object used for buffer object swap.
+ * @device_list_mutex: Mutex protecting the device list.
+ * This mutex is held while traversing the device list for pm options.
+ * @lru_lock: Spinlock protecting the bo subsystem lru lists.
+ * @device_list: List of buffer object devices.
+ * @swap_lru: Lru list of buffer objects used for swapping.
+ */
+
+struct ttm_bo_global {
+
+	/**
+	 * Constant after init.
+	 */
+
+	struct kobject kobj;
+	struct ttm_mem_global *mem_glob;
+	struct page *dummy_read_page;
+	struct ttm_mem_shrink shrink;
+	struct mutex device_list_mutex;
+	spinlock_t lru_lock;
+
+	/**
+	 * Protected by device_list_mutex.
+	 */
+	struct list_head device_list;
+
+	/**
+	 * Protected by the lru_lock.
+	 */
+	struct list_head swap_lru;
+
+	/**
+	 * Internal protection.
+	 */
+	atomic_t bo_count;
+};
+
+
+#define TTM_NUM_MEM_TYPES 8
+
+#define TTM_BO_PRIV_FLAG_MOVING  0	/* Buffer object is moving and needs
+					   idling before CPU mapping */
+#define TTM_BO_PRIV_FLAG_MAX 1
+/**
+ * struct ttm_bo_device - Buffer object driver device-specific data.
+ *
+ * @driver: Pointer to a struct ttm_bo_driver struct setup by the driver.
+ * @man: An array of mem_type_managers.
+ * @fence_lock: Protects the synchronizing members on *all* bos belonging
+ * to this device.
+ * @addr_space_mm: Range manager for the device address space.
+ * lru_lock: Spinlock that protects the buffer+device lru lists and
+ * ddestroy lists.
+ * @val_seq: Current validation sequence.
+ * @nice_mode: Try nicely to wait for buffer idle when cleaning a manager.
+ * If a GPU lockup has been detected, this is forced to 0.
+ * @dev_mapping: A pointer to the struct address_space representing the
+ * device address space.
+ * @wq: Work queue structure for the delayed delete workqueue.
+ *
+ */
+
+struct ttm_bo_device {
+
+	/*
+	 * Constant after bo device init / atomic.
+	 */
+	struct list_head device_list;
+	struct ttm_bo_global *glob;
+	struct ttm_bo_driver *driver;
+	rwlock_t vm_lock;
+	struct ttm_mem_type_manager man[TTM_NUM_MEM_TYPES];
+	spinlock_t fence_lock;
+	/*
+	 * Protected by the vm lock.
+	 */
+	struct rb_root addr_space_rb;
+	struct drm_mm addr_space_mm;
+
+	/*
+	 * Protected by the global:lru lock.
+	 */
+	struct list_head ddestroy;
+	uint32_t val_seq;
+
+	/*
+	 * Protected by load / firstopen / lastclose /unload sync.
+	 */
+
+	bool nice_mode;
+	struct address_space *dev_mapping;
+
+	/*
+	 * Internal protection.
+	 */
+
+	struct delayed_work wq;
+
+	bool need_dma32;
+};
+
+/**
+ * ttm_flag_masked
+ *
+ * @old: Pointer to the result and original value.
+ * @new: New value of bits.
+ * @mask: Mask of bits to change.
+ *
+ * Convenience function to change a number of bits identified by a mask.
+ */
+
+static inline uint32_t
+ttm_flag_masked(uint32_t *old, uint32_t new, uint32_t mask)
+{
+	*old ^= (*old ^ new) & mask;
+	return *old;
+}
+
+/**
+ * ttm_tt_init
+ *
+ * @ttm: The struct ttm_tt.
+ * @bdev: pointer to a struct ttm_bo_device:
+ * @size: Size of the data needed backing.
+ * @page_flags: Page flags as identified by TTM_PAGE_FLAG_XX flags.
+ * @dummy_read_page: See struct ttm_bo_device.
+ *
+ * Create a struct ttm_tt to back data with system memory pages.
+ * No pages are actually allocated.
+ * Returns:
+ * NULL: Out of memory.
+ */
+extern int ttm_tt_init(struct ttm_tt *ttm, struct ttm_bo_device *bdev,
+			unsigned long size, uint32_t page_flags,
+			struct page *dummy_read_page);
+extern int ttm_dma_tt_init(struct ttm_dma_tt *ttm_dma, struct ttm_bo_device *bdev,
+			   unsigned long size, uint32_t page_flags,
+			   struct page *dummy_read_page);
+
+/**
+ * ttm_tt_fini
+ *
+ * @ttm: the ttm_tt structure.
+ *
+ * Free memory of ttm_tt structure
+ */
+extern void ttm_tt_fini(struct ttm_tt *ttm);
+extern void ttm_dma_tt_fini(struct ttm_dma_tt *ttm_dma);
+
+/**
+ * ttm_ttm_bind:
+ *
+ * @ttm: The struct ttm_tt containing backing pages.
+ * @bo_mem: The struct ttm_mem_reg identifying the binding location.
+ *
+ * Bind the pages of @ttm to an aperture location identified by @bo_mem
+ */
+extern int ttm_tt_bind(struct ttm_tt *ttm, struct ttm_mem_reg *bo_mem);
+
+/**
+ * ttm_ttm_destroy:
+ *
+ * @ttm: The struct ttm_tt.
+ *
+ * Unbind, unpopulate and destroy common struct ttm_tt.
+ */
+extern void ttm_tt_destroy(struct ttm_tt *ttm);
+
+/**
+ * ttm_ttm_unbind:
+ *
+ * @ttm: The struct ttm_tt.
+ *
+ * Unbind a struct ttm_tt.
+ */
+extern void ttm_tt_unbind(struct ttm_tt *ttm);
+
+/**
+ * ttm_tt_swapin:
+ *
+ * @ttm: The struct ttm_tt.
+ *
+ * Swap in a previously swap out ttm_tt.
+ */
+extern int ttm_tt_swapin(struct ttm_tt *ttm);
+
+/**
+ * ttm_tt_cache_flush:
+ *
+ * @pages: An array of pointers to struct page:s to flush.
+ * @num_pages: Number of pages to flush.
+ *
+ * Flush the data of the indicated pages from the cpu caches.
+ * This is used when changing caching attributes of the pages from
+ * cache-coherent.
+ */
+extern void ttm_tt_cache_flush(struct page *pages[], unsigned long num_pages);
+
+/**
+ * ttm_tt_set_placement_caching:
+ *
+ * @ttm A struct ttm_tt the backing pages of which will change caching policy.
+ * @placement: Flag indicating the desired caching policy.
+ *
+ * This function will change caching policy of any default kernel mappings of
+ * the pages backing @ttm. If changing from cached to uncached or
+ * write-combined,
+ * all CPU caches will first be flushed to make sure the data of the pages
+ * hit RAM. This function may be very costly as it involves global TLB
+ * and cache flushes and potential page splitting / combining.
+ */
+extern int ttm_tt_set_placement_caching(struct ttm_tt *ttm, uint32_t placement);
+extern int ttm_tt_swapout(struct ttm_tt *ttm,
+			  struct file *persistent_swap_storage);
+
+/*
+ * ttm_bo.c
+ */
+
+/**
+ * ttm_mem_reg_is_pci
+ *
+ * @bdev: Pointer to a struct ttm_bo_device.
+ * @mem: A valid struct ttm_mem_reg.
+ *
+ * Returns true if the memory described by @mem is PCI memory,
+ * false otherwise.
+ */
+extern bool ttm_mem_reg_is_pci(struct ttm_bo_device *bdev,
+				   struct ttm_mem_reg *mem);
+
+/**
+ * ttm_bo_mem_space
+ *
+ * @bo: Pointer to a struct ttm_buffer_object. the data of which
+ * we want to allocate space for.
+ * @proposed_placement: Proposed new placement for the buffer object.
+ * @mem: A struct ttm_mem_reg.
+ * @interruptible: Sleep interruptible when sliping.
+ * @no_wait_reserve: Return immediately if other buffers are busy.
+ * @no_wait_gpu: Return immediately if the GPU is busy.
+ *
+ * Allocate memory space for the buffer object pointed to by @bo, using
+ * the placement flags in @mem, potentially evicting other idle buffer objects.
+ * This function may sleep while waiting for space to become available.
+ * Returns:
+ * -EBUSY: No space available (only if no_wait == 1).
+ * -ENOMEM: Could not allocate memory for the buffer object, either due to
+ * fragmentation or concurrent allocators.
+ * -ERESTARTSYS: An interruptible sleep was interrupted by a signal.
+ */
+extern int ttm_bo_mem_space(struct ttm_buffer_object *bo,
+				struct ttm_placement *placement,
+				struct ttm_mem_reg *mem,
+				bool interruptible,
+				bool no_wait_reserve, bool no_wait_gpu);
+
+extern void ttm_bo_mem_put(struct ttm_buffer_object *bo,
+			   struct ttm_mem_reg *mem);
+extern void ttm_bo_mem_put_locked(struct ttm_buffer_object *bo,
+				  struct ttm_mem_reg *mem);
+
+/**
+ * ttm_bo_wait_for_cpu
+ *
+ * @bo: Pointer to a struct ttm_buffer_object.
+ * @no_wait: Don't sleep while waiting.
+ *
+ * Wait until a buffer object is no longer sync'ed for CPU access.
+ * Returns:
+ * -EBUSY: Buffer object was sync'ed for CPU access. (only if no_wait == 1).
+ * -ERESTARTSYS: An interruptible sleep was interrupted by a signal.
+ */
+
+extern int ttm_bo_wait_cpu(struct ttm_buffer_object *bo, bool no_wait);
+
+extern void ttm_bo_global_release(struct drm_global_reference *ref);
+extern int ttm_bo_global_init(struct drm_global_reference *ref);
+
+extern int ttm_bo_device_release(struct ttm_bo_device *bdev);
+
+/**
+ * ttm_bo_device_init
+ *
+ * @bdev: A pointer to a struct ttm_bo_device to initialize.
+ * @glob: A pointer to an initialized struct ttm_bo_global.
+ * @driver: A pointer to a struct ttm_bo_driver set up by the caller.
+ * @file_page_offset: Offset into the device address space that is available
+ * for buffer data. This ensures compatibility with other users of the
+ * address space.
+ *
+ * Initializes a struct ttm_bo_device:
+ * Returns:
+ * !0: Failure.
+ */
+extern int ttm_bo_device_init(struct ttm_bo_device *bdev,
+			      struct ttm_bo_global *glob,
+			      struct ttm_bo_driver *driver,
+			      uint64_t file_page_offset, bool need_dma32);
+
+/**
+ * ttm_bo_unmap_virtual
+ *
+ * @bo: tear down the virtual mappings for this BO
+ */
+extern void ttm_bo_unmap_virtual(struct ttm_buffer_object *bo);
+
+/**
+ * ttm_bo_unmap_virtual
+ *
+ * @bo: tear down the virtual mappings for this BO
+ *
+ * The caller must take ttm_mem_io_lock before calling this function.
+ */
+extern void ttm_bo_unmap_virtual_locked(struct ttm_buffer_object *bo);
+
+extern int ttm_mem_io_reserve_vm(struct ttm_buffer_object *bo);
+extern void ttm_mem_io_free_vm(struct ttm_buffer_object *bo);
+extern int ttm_mem_io_lock(struct ttm_mem_type_manager *man,
+			   bool interruptible);
+extern void ttm_mem_io_unlock(struct ttm_mem_type_manager *man);
+
+
+/**
+ * ttm_bo_reserve:
+ *
+ * @bo: A pointer to a struct ttm_buffer_object.
+ * @interruptible: Sleep interruptible if waiting.
+ * @no_wait: Don't sleep while trying to reserve, rather return -EBUSY.
+ * @use_sequence: If @bo is already reserved, Only sleep waiting for
+ * it to become unreserved if @sequence < (@bo)->sequence.
+ *
+ * Locks a buffer object for validation. (Or prevents other processes from
+ * locking it for validation) and removes it from lru lists, while taking
+ * a number of measures to prevent deadlocks.
+ *
+ * Deadlocks may occur when two processes try to reserve multiple buffers in
+ * different order, either by will or as a result of a buffer being evicted
+ * to make room for a buffer already reserved. (Buffers are reserved before
+ * they are evicted). The following algorithm prevents such deadlocks from
+ * occurring:
+ * 1) Buffers are reserved with the lru spinlock held. Upon successful
+ * reservation they are removed from the lru list. This stops a reserved buffer
+ * from being evicted. However the lru spinlock is released between the time
+ * a buffer is selected for eviction and the time it is reserved.
+ * Therefore a check is made when a buffer is reserved for eviction, that it
+ * is still the first buffer in the lru list, before it is removed from the
+ * list. @check_lru == 1 forces this check. If it fails, the function returns
+ * -EINVAL, and the caller should then choose a new buffer to evict and repeat
+ * the procedure.
+ * 2) Processes attempting to reserve multiple buffers other than for eviction,
+ * (typically execbuf), should first obtain a unique 32-bit
+ * validation sequence number,
+ * and call this function with @use_sequence == 1 and @sequence == the unique
+ * sequence number. If upon call of this function, the buffer object is already
+ * reserved, the validation sequence is checked against the validation
+ * sequence of the process currently reserving the buffer,
+ * and if the current validation sequence is greater than that of the process
+ * holding the reservation, the function returns -EAGAIN. Otherwise it sleeps
+ * waiting for the buffer to become unreserved, after which it retries
+ * reserving.
+ * The caller should, when receiving an -EAGAIN error
+ * release all its buffer reservations, wait for @bo to become unreserved, and
+ * then rerun the validation with the same validation sequence. This procedure
+ * will always guarantee that the process with the lowest validation sequence
+ * will eventually succeed, preventing both deadlocks and starvation.
+ *
+ * Returns:
+ * -EAGAIN: The reservation may cause a deadlock.
+ * Release all buffer reservations, wait for @bo to become unreserved and
+ * try again. (only if use_sequence == 1).
+ * -ERESTARTSYS: A wait for the buffer to become unreserved was interrupted by
+ * a signal. Release all buffer reservations and return to user-space.
+ * -EBUSY: The function needed to sleep, but @no_wait was true
+ * -EDEADLK: Bo already reserved using @sequence. This error code will only
+ * be returned if @use_sequence is set to true.
+ */
+extern int ttm_bo_reserve(struct ttm_buffer_object *bo,
+			  bool interruptible,
+			  bool no_wait, bool use_sequence, uint32_t sequence);
+
+
+/**
+ * ttm_bo_reserve_locked:
+ *
+ * @bo: A pointer to a struct ttm_buffer_object.
+ * @interruptible: Sleep interruptible if waiting.
+ * @no_wait: Don't sleep while trying to reserve, rather return -EBUSY.
+ * @use_sequence: If @bo is already reserved, Only sleep waiting for
+ * it to become unreserved if @sequence < (@bo)->sequence.
+ *
+ * Must be called with struct ttm_bo_global::lru_lock held,
+ * and will not remove reserved buffers from the lru lists.
+ * The function may release the LRU spinlock if it needs to sleep.
+ * Otherwise identical to ttm_bo_reserve.
+ *
+ * Returns:
+ * -EAGAIN: The reservation may cause a deadlock.
+ * Release all buffer reservations, wait for @bo to become unreserved and
+ * try again. (only if use_sequence == 1).
+ * -ERESTARTSYS: A wait for the buffer to become unreserved was interrupted by
+ * a signal. Release all buffer reservations and return to user-space.
+ * -EBUSY: The function needed to sleep, but @no_wait was true
+ * -EDEADLK: Bo already reserved using @sequence. This error code will only
+ * be returned if @use_sequence is set to true.
+ */
+extern int ttm_bo_reserve_locked(struct ttm_buffer_object *bo,
+				 bool interruptible,
+				 bool no_wait, bool use_sequence,
+				 uint32_t sequence);
+
+/**
+ * ttm_bo_unreserve
+ *
+ * @bo: A pointer to a struct ttm_buffer_object.
+ *
+ * Unreserve a previous reservation of @bo.
+ */
+extern void ttm_bo_unreserve(struct ttm_buffer_object *bo);
+
+/**
+ * ttm_bo_unreserve_locked
+ *
+ * @bo: A pointer to a struct ttm_buffer_object.
+ *
+ * Unreserve a previous reservation of @bo.
+ * Needs to be called with struct ttm_bo_global::lru_lock held.
+ */
+extern void ttm_bo_unreserve_locked(struct ttm_buffer_object *bo);
+
+/**
+ * ttm_bo_wait_unreserved
+ *
+ * @bo: A pointer to a struct ttm_buffer_object.
+ *
+ * Wait for a struct ttm_buffer_object to become unreserved.
+ * This is typically used in the execbuf code to relax cpu-usage when
+ * a potential deadlock condition backoff.
+ */
+extern int ttm_bo_wait_unreserved(struct ttm_buffer_object *bo,
+				  bool interruptible);
+
+/*
+ * ttm_bo_util.c
+ */
+
+/**
+ * ttm_bo_move_ttm
+ *
+ * @bo: A pointer to a struct ttm_buffer_object.
+ * @evict: 1: This is an eviction. Don't try to pipeline.
+ * @no_wait_reserve: Return immediately if other buffers are busy.
+ * @no_wait_gpu: Return immediately if the GPU is busy.
+ * @new_mem: struct ttm_mem_reg indicating where to move.
+ *
+ * Optimized move function for a buffer object with both old and
+ * new placement backed by a TTM. The function will, if successful,
+ * free any old aperture space, and set (@new_mem)->mm_node to NULL,
+ * and update the (@bo)->mem placement flags. If unsuccessful, the old
+ * data remains untouched, and it's up to the caller to free the
+ * memory space indicated by @new_mem.
+ * Returns:
+ * !0: Failure.
+ */
+
+extern int ttm_bo_move_ttm(struct ttm_buffer_object *bo,
+			   bool evict, bool no_wait_reserve,
+			   bool no_wait_gpu, struct ttm_mem_reg *new_mem);
+
+/**
+ * ttm_bo_move_memcpy
+ *
+ * @bo: A pointer to a struct ttm_buffer_object.
+ * @evict: 1: This is an eviction. Don't try to pipeline.
+ * @no_wait_reserve: Return immediately if other buffers are busy.
+ * @no_wait_gpu: Return immediately if the GPU is busy.
+ * @new_mem: struct ttm_mem_reg indicating where to move.
+ *
+ * Fallback move function for a mappable buffer object in mappable memory.
+ * The function will, if successful,
+ * free any old aperture space, and set (@new_mem)->mm_node to NULL,
+ * and update the (@bo)->mem placement flags. If unsuccessful, the old
+ * data remains untouched, and it's up to the caller to free the
+ * memory space indicated by @new_mem.
+ * Returns:
+ * !0: Failure.
+ */
+
+extern int ttm_bo_move_memcpy(struct ttm_buffer_object *bo,
+			      bool evict, bool no_wait_reserve,
+			      bool no_wait_gpu, struct ttm_mem_reg *new_mem);
+
+/**
+ * ttm_bo_free_old_node
+ *
+ * @bo: A pointer to a struct ttm_buffer_object.
+ *
+ * Utility function to free an old placement after a successful move.
+ */
+extern void ttm_bo_free_old_node(struct ttm_buffer_object *bo);
+
+/**
+ * ttm_bo_move_accel_cleanup.
+ *
+ * @bo: A pointer to a struct ttm_buffer_object.
+ * @sync_obj: A sync object that signals when moving is complete.
+ * @sync_obj_arg: An argument to pass to the sync object idle / wait
+ * functions.
+ * @evict: This is an evict move. Don't return until the buffer is idle.
+ * @no_wait_reserve: Return immediately if other buffers are busy.
+ * @no_wait_gpu: Return immediately if the GPU is busy.
+ * @new_mem: struct ttm_mem_reg indicating where to move.
+ *
+ * Accelerated move function to be called when an accelerated move
+ * has been scheduled. The function will create a new temporary buffer object
+ * representing the old placement, and put the sync object on both buffer
+ * objects. After that the newly created buffer object is unref'd to be
+ * destroyed when the move is complete. This will help pipeline
+ * buffer moves.
+ */
+
+extern int ttm_bo_move_accel_cleanup(struct ttm_buffer_object *bo,
+				     void *sync_obj,
+				     void *sync_obj_arg,
+				     bool evict, bool no_wait_reserve,
+				     bool no_wait_gpu,
+				     struct ttm_mem_reg *new_mem);
+/**
+ * ttm_io_prot
+ *
+ * @c_state: Caching state.
+ * @tmp: Page protection flag for a normal, cached mapping.
+ *
+ * Utility function that returns the pgprot_t that should be used for
+ * setting up a PTE with the caching model indicated by @c_state.
+ */
+extern pgprot_t ttm_io_prot(uint32_t caching_flags, pgprot_t tmp);
+
+extern const struct ttm_mem_type_manager_func ttm_bo_manager_func;
+
+#if (defined(CONFIG_AGP) || (defined(CONFIG_AGP_MODULE) && defined(MODULE)))
+#define TTM_HAS_AGP
+#include <linux/agp_backend.h>
+
+/**
+ * ttm_agp_tt_create
+ *
+ * @bdev: Pointer to a struct ttm_bo_device.
+ * @bridge: The agp bridge this device is sitting on.
+ * @size: Size of the data needed backing.
+ * @page_flags: Page flags as identified by TTM_PAGE_FLAG_XX flags.
+ * @dummy_read_page: See struct ttm_bo_device.
+ *
+ *
+ * Create a TTM backend that uses the indicated AGP bridge as an aperture
+ * for TT memory. This function uses the linux agpgart interface to
+ * bind and unbind memory backing a ttm_tt.
+ */
+extern struct ttm_tt *ttm_agp_tt_create(struct ttm_bo_device *bdev,
+					struct agp_bridge_data *bridge,
+					unsigned long size, uint32_t page_flags,
+					struct page *dummy_read_page);
+int ttm_agp_tt_populate(struct ttm_tt *ttm);
+void ttm_agp_tt_unpopulate(struct ttm_tt *ttm);
+#endif
+
+#endif
diff --git a/include/drm/ttm/ttm_execbuf_util.h b/include/drm/ttm/ttm_execbuf_util.h
new file mode 100644
index 00000000..26cc7f9f
--- /dev/null
+++ b/include/drm/ttm/ttm_execbuf_util.h
@@ -0,0 +1,112 @@
+/**************************************************************************
+ *
+ * Copyright (c) 2006-2009 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+/*
+ * Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
+ */
+
+#ifndef _TTM_EXECBUF_UTIL_H_
+#define _TTM_EXECBUF_UTIL_H_
+
+#include "ttm/ttm_bo_api.h"
+#include <linux/list.h>
+
+/**
+ * struct ttm_validate_buffer
+ *
+ * @head:           list head for thread-private list.
+ * @bo:             refcounted buffer object pointer.
+ * @new_sync_obj_arg: New sync_obj_arg for @bo, to be used once
+ * adding a new sync object.
+ * @reserved:       Indicates whether @bo has been reserved for validation.
+ * @removed:        Indicates whether @bo has been removed from lru lists.
+ * @put_count:      Number of outstanding references on bo::list_kref.
+ * @old_sync_obj:   Pointer to a sync object about to be unreferenced
+ */
+
+struct ttm_validate_buffer {
+	struct list_head head;
+	struct ttm_buffer_object *bo;
+	void *new_sync_obj_arg;
+	bool reserved;
+	bool removed;
+	int put_count;
+	void *old_sync_obj;
+};
+
+/**
+ * function ttm_eu_backoff_reservation
+ *
+ * @list:     thread private list of ttm_validate_buffer structs.
+ *
+ * Undoes all buffer validation reservations for bos pointed to by
+ * the list entries.
+ */
+
+extern void ttm_eu_backoff_reservation(struct list_head *list);
+
+/**
+ * function ttm_eu_reserve_buffers
+ *
+ * @list:    thread private list of ttm_validate_buffer structs.
+ *
+ * Tries to reserve bos pointed to by the list entries for validation.
+ * If the function returns 0, all buffers are marked as "unfenced",
+ * taken off the lru lists and are not synced for write CPU usage.
+ *
+ * If the function detects a deadlock due to multiple threads trying to
+ * reserve the same buffers in reverse order, all threads except one will
+ * back off and retry. This function may sleep while waiting for
+ * CPU write reservations to be cleared, and for other threads to
+ * unreserve their buffers.
+ *
+ * This function may return -ERESTART or -EAGAIN if the calling process
+ * receives a signal while waiting. In that case, no buffers on the list
+ * will be reserved upon return.
+ *
+ * Buffers reserved by this function should be unreserved by
+ * a call to either ttm_eu_backoff_reservation() or
+ * ttm_eu_fence_buffer_objects() when command submission is complete or
+ * has failed.
+ */
+
+extern int ttm_eu_reserve_buffers(struct list_head *list);
+
+/**
+ * function ttm_eu_fence_buffer_objects.
+ *
+ * @list:        thread private list of ttm_validate_buffer structs.
+ * @sync_obj:    The new sync object for the buffers.
+ *
+ * This function should be called when command submission is complete, and
+ * it will add a new sync object to bos pointed to by entries on @list.
+ * It also unreserves all buffers, putting them on lru lists.
+ *
+ */
+
+extern void ttm_eu_fence_buffer_objects(struct list_head *list, void *sync_obj);
+
+#endif
diff --git a/include/drm/ttm/ttm_lock.h b/include/drm/ttm/ttm_lock.h
new file mode 100644
index 00000000..2e7f0c94
--- /dev/null
+++ b/include/drm/ttm/ttm_lock.h
@@ -0,0 +1,247 @@
+/**************************************************************************
+ *
+ * Copyright (c) 2007-2009 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+/*
+ * Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
+ */
+
+/** @file ttm_lock.h
+ * This file implements a simple replacement for the buffer manager use
+ * of the DRM heavyweight hardware lock.
+ * The lock is a read-write lock. Taking it in read mode and write mode
+ * is relatively fast, and intended for in-kernel use only.
+ *
+ * The vt mode is used only when there is a need to block all
+ * user-space processes from validating buffers.
+ * It's allowed to leave kernel space with the vt lock held.
+ * If a user-space process dies while having the vt-lock,
+ * it will be released during the file descriptor release. The vt lock
+ * excludes write lock and read lock.
+ *
+ * The suspend mode is used to lock out all TTM users when preparing for
+ * and executing suspend operations.
+ *
+ */
+
+#ifndef _TTM_LOCK_H_
+#define _TTM_LOCK_H_
+
+#include "ttm/ttm_object.h"
+#include <linux/wait.h>
+#include <linux/atomic.h>
+
+/**
+ * struct ttm_lock
+ *
+ * @base: ttm base object used solely to release the lock if the client
+ * holding the lock dies.
+ * @queue: Queue for processes waiting for lock change-of-status.
+ * @lock: Spinlock protecting some lock members.
+ * @rw: Read-write lock counter. Protected by @lock.
+ * @flags: Lock state. Protected by @lock.
+ * @kill_takers: Boolean whether to kill takers of the lock.
+ * @signal: Signal to send when kill_takers is true.
+ */
+
+struct ttm_lock {
+	struct ttm_base_object base;
+	wait_queue_head_t queue;
+	spinlock_t lock;
+	int32_t rw;
+	uint32_t flags;
+	bool kill_takers;
+	int signal;
+	struct ttm_object_file *vt_holder;
+};
+
+
+/**
+ * ttm_lock_init
+ *
+ * @lock: Pointer to a struct ttm_lock
+ * Initializes the lock.
+ */
+extern void ttm_lock_init(struct ttm_lock *lock);
+
+/**
+ * ttm_read_unlock
+ *
+ * @lock: Pointer to a struct ttm_lock
+ *
+ * Releases a read lock.
+ */
+extern void ttm_read_unlock(struct ttm_lock *lock);
+
+/**
+ * ttm_read_lock
+ *
+ * @lock: Pointer to a struct ttm_lock
+ * @interruptible: Interruptible sleeping while waiting for a lock.
+ *
+ * Takes the lock in read mode.
+ * Returns:
+ * -ERESTARTSYS If interrupted by a signal and interruptible is true.
+ */
+extern int ttm_read_lock(struct ttm_lock *lock, bool interruptible);
+
+/**
+ * ttm_read_trylock
+ *
+ * @lock: Pointer to a struct ttm_lock
+ * @interruptible: Interruptible sleeping while waiting for a lock.
+ *
+ * Tries to take the lock in read mode. If the lock is already held
+ * in write mode, the function will return -EBUSY. If the lock is held
+ * in vt or suspend mode, the function will sleep until these modes
+ * are unlocked.
+ *
+ * Returns:
+ * -EBUSY The lock was already held in write mode.
+ * -ERESTARTSYS If interrupted by a signal and interruptible is true.
+ */
+extern int ttm_read_trylock(struct ttm_lock *lock, bool interruptible);
+
+/**
+ * ttm_write_unlock
+ *
+ * @lock: Pointer to a struct ttm_lock
+ *
+ * Releases a write lock.
+ */
+extern void ttm_write_unlock(struct ttm_lock *lock);
+
+/**
+ * ttm_write_lock
+ *
+ * @lock: Pointer to a struct ttm_lock
+ * @interruptible: Interruptible sleeping while waiting for a lock.
+ *
+ * Takes the lock in write mode.
+ * Returns:
+ * -ERESTARTSYS If interrupted by a signal and interruptible is true.
+ */
+extern int ttm_write_lock(struct ttm_lock *lock, bool interruptible);
+
+/**
+ * ttm_lock_downgrade
+ *
+ * @lock: Pointer to a struct ttm_lock
+ *
+ * Downgrades a write lock to a read lock.
+ */
+extern void ttm_lock_downgrade(struct ttm_lock *lock);
+
+/**
+ * ttm_suspend_lock
+ *
+ * @lock: Pointer to a struct ttm_lock
+ *
+ * Takes the lock in suspend mode. Excludes read and write mode.
+ */
+extern void ttm_suspend_lock(struct ttm_lock *lock);
+
+/**
+ * ttm_suspend_unlock
+ *
+ * @lock: Pointer to a struct ttm_lock
+ *
+ * Releases a suspend lock
+ */
+extern void ttm_suspend_unlock(struct ttm_lock *lock);
+
+/**
+ * ttm_vt_lock
+ *
+ * @lock: Pointer to a struct ttm_lock
+ * @interruptible: Interruptible sleeping while waiting for a lock.
+ * @tfile: Pointer to a struct ttm_object_file to register the lock with.
+ *
+ * Takes the lock in vt mode.
+ * Returns:
+ * -ERESTARTSYS If interrupted by a signal and interruptible is true.
+ * -ENOMEM: Out of memory when locking.
+ */
+extern int ttm_vt_lock(struct ttm_lock *lock, bool interruptible,
+		       struct ttm_object_file *tfile);
+
+/**
+ * ttm_vt_unlock
+ *
+ * @lock: Pointer to a struct ttm_lock
+ *
+ * Releases a vt lock.
+ * Returns:
+ * -EINVAL If the lock was not held.
+ */
+extern int ttm_vt_unlock(struct ttm_lock *lock);
+
+/**
+ * ttm_write_unlock
+ *
+ * @lock: Pointer to a struct ttm_lock
+ *
+ * Releases a write lock.
+ */
+extern void ttm_write_unlock(struct ttm_lock *lock);
+
+/**
+ * ttm_write_lock
+ *
+ * @lock: Pointer to a struct ttm_lock
+ * @interruptible: Interruptible sleeping while waiting for a lock.
+ *
+ * Takes the lock in write mode.
+ * Returns:
+ * -ERESTARTSYS If interrupted by a signal and interruptible is true.
+ */
+extern int ttm_write_lock(struct ttm_lock *lock, bool interruptible);
+
+/**
+ * ttm_lock_set_kill
+ *
+ * @lock: Pointer to a struct ttm_lock
+ * @val: Boolean whether to kill processes taking the lock.
+ * @signal: Signal to send to the process taking the lock.
+ *
+ * The kill-when-taking-lock functionality is used to kill processes that keep
+ * on using the TTM functionality when its resources has been taken down, for
+ * example when the X server exits. A typical sequence would look like this:
+ * - X server takes lock in write mode.
+ * - ttm_lock_set_kill() is called with @val set to true.
+ * - As part of X server exit, TTM resources are taken down.
+ * - X server releases the lock on file release.
+ * - Another dri client wants to render, takes the lock and is killed.
+ *
+ */
+static inline void ttm_lock_set_kill(struct ttm_lock *lock, bool val,
+				     int signal)
+{
+	lock->kill_takers = val;
+	if (val)
+		lock->signal = signal;
+}
+
+#endif
diff --git a/include/drm/ttm/ttm_memory.h b/include/drm/ttm/ttm_memory.h
new file mode 100644
index 00000000..d6d1da46
--- /dev/null
+++ b/include/drm/ttm/ttm_memory.h
@@ -0,0 +1,160 @@
+/**************************************************************************
+ *
+ * Copyright (c) 2006-2009 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+
+#ifndef TTM_MEMORY_H
+#define TTM_MEMORY_H
+
+#include <linux/workqueue.h>
+#include <linux/spinlock.h>
+#include <linux/bug.h>
+#include <linux/wait.h>
+#include <linux/errno.h>
+#include <linux/kobject.h>
+#include <linux/mm.h>
+
+/**
+ * struct ttm_mem_shrink - callback to shrink TTM memory usage.
+ *
+ * @do_shrink: The callback function.
+ *
+ * Arguments to the do_shrink functions are intended to be passed using
+ * inheritance. That is, the argument class derives from struct ttm_mem_shrink,
+ * and can be accessed using container_of().
+ */
+
+struct ttm_mem_shrink {
+	int (*do_shrink) (struct ttm_mem_shrink *);
+};
+
+/**
+ * struct ttm_mem_global - Global memory accounting structure.
+ *
+ * @shrink: A single callback to shrink TTM memory usage. Extend this
+ * to a linked list to be able to handle multiple callbacks when needed.
+ * @swap_queue: A workqueue to handle shrinking in low memory situations. We
+ * need a separate workqueue since it will spend a lot of time waiting
+ * for the GPU, and this will otherwise block other workqueue tasks(?)
+ * At this point we use only a single-threaded workqueue.
+ * @work: The workqueue callback for the shrink queue.
+ * @queue: Wait queue for processes suspended waiting for memory.
+ * @lock: Lock to protect the @shrink - and the memory accounting members,
+ * that is, essentially the whole structure with some exceptions.
+ * @zones: Array of pointers to accounting zones.
+ * @num_zones: Number of populated entries in the @zones array.
+ * @zone_kernel: Pointer to the kernel zone.
+ * @zone_highmem: Pointer to the highmem zone if there is one.
+ * @zone_dma32: Pointer to the dma32 zone if there is one.
+ *
+ * Note that this structure is not per device. It should be global for all
+ * graphics devices.
+ */
+
+#define TTM_MEM_MAX_ZONES 2
+struct ttm_mem_zone;
+struct ttm_mem_global {
+	struct kobject kobj;
+	struct ttm_mem_shrink *shrink;
+	struct workqueue_struct *swap_queue;
+	struct work_struct work;
+	wait_queue_head_t queue;
+	spinlock_t lock;
+	struct ttm_mem_zone *zones[TTM_MEM_MAX_ZONES];
+	unsigned int num_zones;
+	struct ttm_mem_zone *zone_kernel;
+#ifdef CONFIG_HIGHMEM
+	struct ttm_mem_zone *zone_highmem;
+#else
+	struct ttm_mem_zone *zone_dma32;
+#endif
+};
+
+/**
+ * ttm_mem_init_shrink - initialize a struct ttm_mem_shrink object
+ *
+ * @shrink: The object to initialize.
+ * @func: The callback function.
+ */
+
+static inline void ttm_mem_init_shrink(struct ttm_mem_shrink *shrink,
+				       int (*func) (struct ttm_mem_shrink *))
+{
+	shrink->do_shrink = func;
+}
+
+/**
+ * ttm_mem_register_shrink - register a struct ttm_mem_shrink object.
+ *
+ * @glob: The struct ttm_mem_global object to register with.
+ * @shrink: An initialized struct ttm_mem_shrink object to register.
+ *
+ * Returns:
+ * -EBUSY: There's already a callback registered. (May change).
+ */
+
+static inline int ttm_mem_register_shrink(struct ttm_mem_global *glob,
+					  struct ttm_mem_shrink *shrink)
+{
+	spin_lock(&glob->lock);
+	if (glob->shrink != NULL) {
+		spin_unlock(&glob->lock);
+		return -EBUSY;
+	}
+	glob->shrink = shrink;
+	spin_unlock(&glob->lock);
+	return 0;
+}
+
+/**
+ * ttm_mem_unregister_shrink - unregister a struct ttm_mem_shrink object.
+ *
+ * @glob: The struct ttm_mem_global object to unregister from.
+ * @shrink: A previously registert struct ttm_mem_shrink object.
+ *
+ */
+
+static inline void ttm_mem_unregister_shrink(struct ttm_mem_global *glob,
+					     struct ttm_mem_shrink *shrink)
+{
+	spin_lock(&glob->lock);
+	BUG_ON(glob->shrink != shrink);
+	glob->shrink = NULL;
+	spin_unlock(&glob->lock);
+}
+
+extern int ttm_mem_global_init(struct ttm_mem_global *glob);
+extern void ttm_mem_global_release(struct ttm_mem_global *glob);
+extern int ttm_mem_global_alloc(struct ttm_mem_global *glob, uint64_t memory,
+				bool no_wait, bool interruptible);
+extern void ttm_mem_global_free(struct ttm_mem_global *glob,
+				uint64_t amount);
+extern int ttm_mem_global_alloc_page(struct ttm_mem_global *glob,
+				     struct page *page,
+				     bool no_wait, bool interruptible);
+extern void ttm_mem_global_free_page(struct ttm_mem_global *glob,
+				     struct page *page);
+extern size_t ttm_round_pot(size_t size);
+#endif
diff --git a/include/drm/ttm/ttm_module.h b/include/drm/ttm/ttm_module.h
new file mode 100644
index 00000000..45fa318c
--- /dev/null
+++ b/include/drm/ttm/ttm_module.h
@@ -0,0 +1,40 @@
+/**************************************************************************
+ *
+ * Copyright 2008-2009 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+/*
+ * Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
+ */
+
+#ifndef _TTM_MODULE_H_
+#define _TTM_MODULE_H_
+
+#include <linux/kernel.h>
+struct kobject;
+
+#define TTM_PFX "[TTM] "
+extern struct kobject *ttm_get_kobj(void);
+
+#endif /* _TTM_MODULE_H_ */
diff --git a/include/drm/ttm/ttm_object.h b/include/drm/ttm/ttm_object.h
new file mode 100644
index 00000000..e46054e5
--- /dev/null
+++ b/include/drm/ttm/ttm_object.h
@@ -0,0 +1,271 @@
+/**************************************************************************
+ *
+ * Copyright (c) 2006-2009 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+/*
+ * Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
+ */
+/** @file ttm_object.h
+ *
+ * Base- and reference object implementation for the various
+ * ttm objects. Implements reference counting, minimal security checks
+ * and release on file close.
+ */
+
+#ifndef _TTM_OBJECT_H_
+#define _TTM_OBJECT_H_
+
+#include <linux/list.h>
+#include "drm_hashtab.h"
+#include <linux/kref.h>
+#include <ttm/ttm_memory.h>
+
+/**
+ * enum ttm_ref_type
+ *
+ * Describes what type of reference a ref object holds.
+ *
+ * TTM_REF_USAGE is a simple refcount on a base object.
+ *
+ * TTM_REF_SYNCCPU_READ is a SYNCCPU_READ reference on a
+ * buffer object.
+ *
+ * TTM_REF_SYNCCPU_WRITE is a SYNCCPU_WRITE reference on a
+ * buffer object.
+ *
+ */
+
+enum ttm_ref_type {
+	TTM_REF_USAGE,
+	TTM_REF_SYNCCPU_READ,
+	TTM_REF_SYNCCPU_WRITE,
+	TTM_REF_NUM
+};
+
+/**
+ * enum ttm_object_type
+ *
+ * One entry per ttm object type.
+ * Device-specific types should use the
+ * ttm_driver_typex types.
+ */
+
+enum ttm_object_type {
+	ttm_fence_type,
+	ttm_buffer_type,
+	ttm_lock_type,
+	ttm_driver_type0 = 256,
+	ttm_driver_type1,
+	ttm_driver_type2,
+	ttm_driver_type3,
+	ttm_driver_type4,
+	ttm_driver_type5
+};
+
+struct ttm_object_file;
+struct ttm_object_device;
+
+/**
+ * struct ttm_base_object
+ *
+ * @hash: hash entry for the per-device object hash.
+ * @type: derived type this object is base class for.
+ * @shareable: Other ttm_object_files can access this object.
+ *
+ * @tfile: Pointer to ttm_object_file of the creator.
+ * NULL if the object was not created by a user request.
+ * (kernel object).
+ *
+ * @refcount: Number of references to this object, not
+ * including the hash entry. A reference to a base object can
+ * only be held by a ref object.
+ *
+ * @refcount_release: A function to be called when there are
+ * no more references to this object. This function should
+ * destroy the object (or make sure destruction eventually happens),
+ * and when it is called, the object has
+ * already been taken out of the per-device hash. The parameter
+ * "base" should be set to NULL by the function.
+ *
+ * @ref_obj_release: A function to be called when a reference object
+ * with another ttm_ref_type than TTM_REF_USAGE is deleted.
+ * This function may, for example, release a lock held by a user-space
+ * process.
+ *
+ * This struct is intended to be used as a base struct for objects that
+ * are visible to user-space. It provides a global name, race-safe
+ * access and refcounting, minimal access contol and hooks for unref actions.
+ */
+
+struct ttm_base_object {
+	struct drm_hash_item hash;
+	enum ttm_object_type object_type;
+	bool shareable;
+	struct ttm_object_file *tfile;
+	struct kref refcount;
+	void (*refcount_release) (struct ttm_base_object **base);
+	void (*ref_obj_release) (struct ttm_base_object *base,
+				 enum ttm_ref_type ref_type);
+};
+
+/**
+ * ttm_base_object_init
+ *
+ * @tfile: Pointer to a struct ttm_object_file.
+ * @base: The struct ttm_base_object to initialize.
+ * @shareable: This object is shareable with other applcations.
+ * (different @tfile pointers.)
+ * @type: The object type.
+ * @refcount_release: See the struct ttm_base_object description.
+ * @ref_obj_release: See the struct ttm_base_object description.
+ *
+ * Initializes a struct ttm_base_object.
+ */
+
+extern int ttm_base_object_init(struct ttm_object_file *tfile,
+				struct ttm_base_object *base,
+				bool shareable,
+				enum ttm_object_type type,
+				void (*refcount_release) (struct ttm_base_object
+							  **),
+				void (*ref_obj_release) (struct ttm_base_object
+							 *,
+							 enum ttm_ref_type
+							 ref_type));
+
+/**
+ * ttm_base_object_lookup
+ *
+ * @tfile: Pointer to a struct ttm_object_file.
+ * @key: Hash key
+ *
+ * Looks up a struct ttm_base_object with the key @key.
+ * Also verifies that the object is visible to the application, by
+ * comparing the @tfile argument and checking the object shareable flag.
+ */
+
+extern struct ttm_base_object *ttm_base_object_lookup(struct ttm_object_file
+						      *tfile, uint32_t key);
+
+/**
+ * ttm_base_object_unref
+ *
+ * @p_base: Pointer to a pointer referencing a struct ttm_base_object.
+ *
+ * Decrements the base object refcount and clears the pointer pointed to by
+ * p_base.
+ */
+
+extern void ttm_base_object_unref(struct ttm_base_object **p_base);
+
+/**
+ * ttm_ref_object_add.
+ *
+ * @tfile: A struct ttm_object_file representing the application owning the
+ * ref_object.
+ * @base: The base object to reference.
+ * @ref_type: The type of reference.
+ * @existed: Upon completion, indicates that an identical reference object
+ * already existed, and the refcount was upped on that object instead.
+ *
+ * Adding a ref object to a base object is basically like referencing the
+ * base object, but a user-space application holds the reference. When the
+ * file corresponding to @tfile is closed, all its reference objects are
+ * deleted. A reference object can have different types depending on what
+ * it's intended for. It can be refcounting to prevent object destruction,
+ * When user-space takes a lock, it can add a ref object to that lock to
+ * make sure the lock is released if the application dies. A ref object
+ * will hold a single reference on a base object.
+ */
+extern int ttm_ref_object_add(struct ttm_object_file *tfile,
+			      struct ttm_base_object *base,
+			      enum ttm_ref_type ref_type, bool *existed);
+/**
+ * ttm_ref_object_base_unref
+ *
+ * @key: Key representing the base object.
+ * @ref_type: Ref type of the ref object to be dereferenced.
+ *
+ * Unreference a ref object with type @ref_type
+ * on the base object identified by @key. If there are no duplicate
+ * references, the ref object will be destroyed and the base object
+ * will be unreferenced.
+ */
+extern int ttm_ref_object_base_unref(struct ttm_object_file *tfile,
+				     unsigned long key,
+				     enum ttm_ref_type ref_type);
+
+/**
+ * ttm_object_file_init - initialize a struct ttm_object file
+ *
+ * @tdev: A struct ttm_object device this file is initialized on.
+ * @hash_order: Order of the hash table used to hold the reference objects.
+ *
+ * This is typically called by the file_ops::open function.
+ */
+
+extern struct ttm_object_file *ttm_object_file_init(struct ttm_object_device
+						    *tdev,
+						    unsigned int hash_order);
+
+/**
+ * ttm_object_file_release - release data held by a ttm_object_file
+ *
+ * @p_tfile: Pointer to pointer to the ttm_object_file object to release.
+ * *p_tfile will be set to NULL by this function.
+ *
+ * Releases all data associated by a ttm_object_file.
+ * Typically called from file_ops::release. The caller must
+ * ensure that there are no concurrent users of tfile.
+ */
+
+extern void ttm_object_file_release(struct ttm_object_file **p_tfile);
+
+/**
+ * ttm_object device init - initialize a struct ttm_object_device
+ *
+ * @hash_order: Order of hash table used to hash the base objects.
+ *
+ * This function is typically called on device initialization to prepare
+ * data structures needed for ttm base and ref objects.
+ */
+
+extern struct ttm_object_device *ttm_object_device_init
+    (struct ttm_mem_global *mem_glob, unsigned int hash_order);
+
+/**
+ * ttm_object_device_release - release data held by a ttm_object_device
+ *
+ * @p_tdev: Pointer to pointer to the ttm_object_device object to release.
+ * *p_tdev will be set to NULL by this function.
+ *
+ * Releases all data associated by a ttm_object_device.
+ * Typically called from driver::unload before the destruction of the
+ * device private data structure.
+ */
+
+extern void ttm_object_device_release(struct ttm_object_device **p_tdev);
+
+#endif
diff --git a/include/drm/ttm/ttm_page_alloc.h b/include/drm/ttm/ttm_page_alloc.h
new file mode 100644
index 00000000..5fe27400
--- /dev/null
+++ b/include/drm/ttm/ttm_page_alloc.h
@@ -0,0 +1,99 @@
+/*
+ * Copyright (c) Red Hat Inc.
+
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sub license,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie <airlied@redhat.com>
+ *          Jerome Glisse <jglisse@redhat.com>
+ */
+#ifndef TTM_PAGE_ALLOC
+#define TTM_PAGE_ALLOC
+
+#include "ttm_bo_driver.h"
+#include "ttm_memory.h"
+
+/**
+ * Initialize pool allocator.
+ */
+int ttm_page_alloc_init(struct ttm_mem_global *glob, unsigned max_pages);
+/**
+ * Free pool allocator.
+ */
+void ttm_page_alloc_fini(void);
+
+/**
+ * ttm_pool_populate:
+ *
+ * @ttm: The struct ttm_tt to contain the backing pages.
+ *
+ * Add backing pages to all of @ttm
+ */
+extern int ttm_pool_populate(struct ttm_tt *ttm);
+
+/**
+ * ttm_pool_unpopulate:
+ *
+ * @ttm: The struct ttm_tt which to free backing pages.
+ *
+ * Free all pages of @ttm
+ */
+extern void ttm_pool_unpopulate(struct ttm_tt *ttm);
+
+/**
+ * Output the state of pools to debugfs file
+ */
+extern int ttm_page_alloc_debugfs(struct seq_file *m, void *data);
+
+
+#ifdef CONFIG_SWIOTLB
+/**
+ * Initialize pool allocator.
+ */
+int ttm_dma_page_alloc_init(struct ttm_mem_global *glob, unsigned max_pages);
+
+/**
+ * Free pool allocator.
+ */
+void ttm_dma_page_alloc_fini(void);
+
+/**
+ * Output the state of pools to debugfs file
+ */
+extern int ttm_dma_page_alloc_debugfs(struct seq_file *m, void *data);
+
+extern int ttm_dma_populate(struct ttm_dma_tt *ttm_dma, struct device *dev);
+extern void ttm_dma_unpopulate(struct ttm_dma_tt *ttm_dma, struct device *dev);
+
+#else
+static inline int ttm_dma_page_alloc_init(struct ttm_mem_global *glob,
+					  unsigned max_pages)
+{
+	return -ENODEV;
+}
+
+static inline void ttm_dma_page_alloc_fini(void) { return; }
+
+static inline int ttm_dma_page_alloc_debugfs(struct seq_file *m, void *data)
+{
+	return 0;
+}
+#endif
+
+#endif
diff --git a/include/drm/ttm/ttm_placement.h b/include/drm/ttm/ttm_placement.h
new file mode 100644
index 00000000..c84ff153
--- /dev/null
+++ b/include/drm/ttm/ttm_placement.h
@@ -0,0 +1,92 @@
+/**************************************************************************
+ *
+ * Copyright (c) 2006-2009 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+/*
+ * Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
+ */
+
+#ifndef _TTM_PLACEMENT_H_
+#define _TTM_PLACEMENT_H_
+/*
+ * Memory regions for data placement.
+ */
+
+#define TTM_PL_SYSTEM           0
+#define TTM_PL_TT               1
+#define TTM_PL_VRAM             2
+#define TTM_PL_PRIV0            3
+#define TTM_PL_PRIV1            4
+#define TTM_PL_PRIV2            5
+#define TTM_PL_PRIV3            6
+#define TTM_PL_PRIV4            7
+#define TTM_PL_PRIV5            8
+#define TTM_PL_SWAPPED          15
+
+#define TTM_PL_FLAG_SYSTEM      (1 << TTM_PL_SYSTEM)
+#define TTM_PL_FLAG_TT          (1 << TTM_PL_TT)
+#define TTM_PL_FLAG_VRAM        (1 << TTM_PL_VRAM)
+#define TTM_PL_FLAG_PRIV0       (1 << TTM_PL_PRIV0)
+#define TTM_PL_FLAG_PRIV1       (1 << TTM_PL_PRIV1)
+#define TTM_PL_FLAG_PRIV2       (1 << TTM_PL_PRIV2)
+#define TTM_PL_FLAG_PRIV3       (1 << TTM_PL_PRIV3)
+#define TTM_PL_FLAG_PRIV4       (1 << TTM_PL_PRIV4)
+#define TTM_PL_FLAG_PRIV5       (1 << TTM_PL_PRIV5)
+#define TTM_PL_FLAG_SWAPPED     (1 << TTM_PL_SWAPPED)
+#define TTM_PL_MASK_MEM         0x0000FFFF
+
+/*
+ * Other flags that affects data placement.
+ * TTM_PL_FLAG_CACHED indicates cache-coherent mappings
+ * if available.
+ * TTM_PL_FLAG_SHARED means that another application may
+ * reference the buffer.
+ * TTM_PL_FLAG_NO_EVICT means that the buffer may never
+ * be evicted to make room for other buffers.
+ */
+
+#define TTM_PL_FLAG_CACHED      (1 << 16)
+#define TTM_PL_FLAG_UNCACHED    (1 << 17)
+#define TTM_PL_FLAG_WC          (1 << 18)
+#define TTM_PL_FLAG_SHARED      (1 << 20)
+#define TTM_PL_FLAG_NO_EVICT    (1 << 21)
+
+#define TTM_PL_MASK_CACHING     (TTM_PL_FLAG_CACHED | \
+				 TTM_PL_FLAG_UNCACHED | \
+				 TTM_PL_FLAG_WC)
+
+#define TTM_PL_MASK_MEMTYPE     (TTM_PL_MASK_MEM | TTM_PL_MASK_CACHING)
+
+/*
+ * Access flags to be used for CPU- and GPU- mappings.
+ * The idea is that the TTM synchronization mechanism will
+ * allow concurrent READ access and exclusive write access.
+ * Currently GPU- and CPU accesses are exclusive.
+ */
+
+#define TTM_ACCESS_READ         (1 << 0)
+#define TTM_ACCESS_WRITE        (1 << 1)
+
+#endif
diff --git a/include/drm/via_drm.h b/include/drm/via_drm.h
new file mode 100644
index 00000000..79b3b6e0
--- /dev/null
+++ b/include/drm/via_drm.h
@@ -0,0 +1,281 @@
+/*
+ * Copyright 1998-2003 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2003 S3 Graphics, Inc. All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sub license,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * VIA, S3 GRAPHICS, AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+#ifndef _VIA_DRM_H_
+#define _VIA_DRM_H_
+
+#include "drm.h"
+
+/* WARNING: These defines must be the same as what the Xserver uses.
+ * if you change them, you must change the defines in the Xserver.
+ */
+
+#ifndef _VIA_DEFINES_
+#define _VIA_DEFINES_
+
+#ifndef __KERNEL__
+#include "via_drmclient.h"
+#endif
+
+#define VIA_NR_SAREA_CLIPRECTS		8
+#define VIA_NR_XVMC_PORTS               10
+#define VIA_NR_XVMC_LOCKS               5
+#define VIA_MAX_CACHELINE_SIZE          64
+#define XVMCLOCKPTR(saPriv,lockNo)					\
+	((volatile struct drm_hw_lock *)(((((unsigned long) (saPriv)->XvMCLockArea) + \
+				      (VIA_MAX_CACHELINE_SIZE - 1)) &	\
+				     ~(VIA_MAX_CACHELINE_SIZE - 1)) +	\
+				    VIA_MAX_CACHELINE_SIZE*(lockNo)))
+
+/* Each region is a minimum of 64k, and there are at most 64 of them.
+ */
+#define VIA_NR_TEX_REGIONS 64
+#define VIA_LOG_MIN_TEX_REGION_SIZE 16
+#endif
+
+#define VIA_UPLOAD_TEX0IMAGE  0x1	/* handled clientside */
+#define VIA_UPLOAD_TEX1IMAGE  0x2	/* handled clientside */
+#define VIA_UPLOAD_CTX        0x4
+#define VIA_UPLOAD_BUFFERS    0x8
+#define VIA_UPLOAD_TEX0       0x10
+#define VIA_UPLOAD_TEX1       0x20
+#define VIA_UPLOAD_CLIPRECTS  0x40
+#define VIA_UPLOAD_ALL        0xff
+
+/* VIA specific ioctls */
+#define DRM_VIA_ALLOCMEM	0x00
+#define DRM_VIA_FREEMEM	        0x01
+#define DRM_VIA_AGP_INIT	0x02
+#define DRM_VIA_FB_INIT	        0x03
+#define DRM_VIA_MAP_INIT	0x04
+#define DRM_VIA_DEC_FUTEX       0x05
+#define NOT_USED
+#define DRM_VIA_DMA_INIT	0x07
+#define DRM_VIA_CMDBUFFER	0x08
+#define DRM_VIA_FLUSH	        0x09
+#define DRM_VIA_PCICMD	        0x0a
+#define DRM_VIA_CMDBUF_SIZE	0x0b
+#define NOT_USED
+#define DRM_VIA_WAIT_IRQ        0x0d
+#define DRM_VIA_DMA_BLIT        0x0e
+#define DRM_VIA_BLIT_SYNC       0x0f
+
+#define DRM_IOCTL_VIA_ALLOCMEM	  DRM_IOWR(DRM_COMMAND_BASE + DRM_VIA_ALLOCMEM, drm_via_mem_t)
+#define DRM_IOCTL_VIA_FREEMEM	  DRM_IOW( DRM_COMMAND_BASE + DRM_VIA_FREEMEM, drm_via_mem_t)
+#define DRM_IOCTL_VIA_AGP_INIT	  DRM_IOWR(DRM_COMMAND_BASE + DRM_VIA_AGP_INIT, drm_via_agp_t)
+#define DRM_IOCTL_VIA_FB_INIT	  DRM_IOWR(DRM_COMMAND_BASE + DRM_VIA_FB_INIT, drm_via_fb_t)
+#define DRM_IOCTL_VIA_MAP_INIT	  DRM_IOWR(DRM_COMMAND_BASE + DRM_VIA_MAP_INIT, drm_via_init_t)
+#define DRM_IOCTL_VIA_DEC_FUTEX   DRM_IOW( DRM_COMMAND_BASE + DRM_VIA_DEC_FUTEX, drm_via_futex_t)
+#define DRM_IOCTL_VIA_DMA_INIT	  DRM_IOWR(DRM_COMMAND_BASE + DRM_VIA_DMA_INIT, drm_via_dma_init_t)
+#define DRM_IOCTL_VIA_CMDBUFFER	  DRM_IOW( DRM_COMMAND_BASE + DRM_VIA_CMDBUFFER, drm_via_cmdbuffer_t)
+#define DRM_IOCTL_VIA_FLUSH	  DRM_IO(  DRM_COMMAND_BASE + DRM_VIA_FLUSH)
+#define DRM_IOCTL_VIA_PCICMD	  DRM_IOW( DRM_COMMAND_BASE + DRM_VIA_PCICMD, drm_via_cmdbuffer_t)
+#define DRM_IOCTL_VIA_CMDBUF_SIZE DRM_IOWR( DRM_COMMAND_BASE + DRM_VIA_CMDBUF_SIZE, \
+					    drm_via_cmdbuf_size_t)
+#define DRM_IOCTL_VIA_WAIT_IRQ    DRM_IOWR( DRM_COMMAND_BASE + DRM_VIA_WAIT_IRQ, drm_via_irqwait_t)
+#define DRM_IOCTL_VIA_DMA_BLIT    DRM_IOW(DRM_COMMAND_BASE + DRM_VIA_DMA_BLIT, drm_via_dmablit_t)
+#define DRM_IOCTL_VIA_BLIT_SYNC   DRM_IOW(DRM_COMMAND_BASE + DRM_VIA_BLIT_SYNC, drm_via_blitsync_t)
+
+/* Indices into buf.Setup where various bits of state are mirrored per
+ * context and per buffer.  These can be fired at the card as a unit,
+ * or in a piecewise fashion as required.
+ */
+
+#define VIA_TEX_SETUP_SIZE 8
+
+/* Flags for clear ioctl
+ */
+#define VIA_FRONT   0x1
+#define VIA_BACK    0x2
+#define VIA_DEPTH   0x4
+#define VIA_STENCIL 0x8
+#define VIA_MEM_VIDEO   0	/* matches drm constant */
+#define VIA_MEM_AGP     1	/* matches drm constant */
+#define VIA_MEM_SYSTEM  2
+#define VIA_MEM_MIXED   3
+#define VIA_MEM_UNKNOWN 4
+
+typedef struct {
+	__u32 offset;
+	__u32 size;
+} drm_via_agp_t;
+
+typedef struct {
+	__u32 offset;
+	__u32 size;
+} drm_via_fb_t;
+
+typedef struct {
+	__u32 context;
+	__u32 type;
+	__u32 size;
+	unsigned long index;
+	unsigned long offset;
+} drm_via_mem_t;
+
+typedef struct _drm_via_init {
+	enum {
+		VIA_INIT_MAP = 0x01,
+		VIA_CLEANUP_MAP = 0x02
+	} func;
+
+	unsigned long sarea_priv_offset;
+	unsigned long fb_offset;
+	unsigned long mmio_offset;
+	unsigned long agpAddr;
+} drm_via_init_t;
+
+typedef struct _drm_via_futex {
+	enum {
+		VIA_FUTEX_WAIT = 0x00,
+		VIA_FUTEX_WAKE = 0X01
+	} func;
+	__u32 ms;
+	__u32 lock;
+	__u32 val;
+} drm_via_futex_t;
+
+typedef struct _drm_via_dma_init {
+	enum {
+		VIA_INIT_DMA = 0x01,
+		VIA_CLEANUP_DMA = 0x02,
+		VIA_DMA_INITIALIZED = 0x03
+	} func;
+
+	unsigned long offset;
+	unsigned long size;
+	unsigned long reg_pause_addr;
+} drm_via_dma_init_t;
+
+typedef struct _drm_via_cmdbuffer {
+	char __user *buf;
+	unsigned long size;
+} drm_via_cmdbuffer_t;
+
+/* Warning: If you change the SAREA structure you must change the Xserver
+ * structure as well */
+
+typedef struct _drm_via_tex_region {
+	unsigned char next, prev;	/* indices to form a circular LRU  */
+	unsigned char inUse;	/* owned by a client, or free? */
+	int age;		/* tracked by clients to update local LRU's */
+} drm_via_tex_region_t;
+
+typedef struct _drm_via_sarea {
+	unsigned int dirty;
+	unsigned int nbox;
+	struct drm_clip_rect boxes[VIA_NR_SAREA_CLIPRECTS];
+	drm_via_tex_region_t texList[VIA_NR_TEX_REGIONS + 1];
+	int texAge;		/* last time texture was uploaded */
+	int ctxOwner;		/* last context to upload state */
+	int vertexPrim;
+
+	/*
+	 * Below is for XvMC.
+	 * We want the lock integers alone on, and aligned to, a cache line.
+	 * Therefore this somewhat strange construct.
+	 */
+
+	char XvMCLockArea[VIA_MAX_CACHELINE_SIZE * (VIA_NR_XVMC_LOCKS + 1)];
+
+	unsigned int XvMCDisplaying[VIA_NR_XVMC_PORTS];
+	unsigned int XvMCSubPicOn[VIA_NR_XVMC_PORTS];
+	unsigned int XvMCCtxNoGrabbed;	/* Last context to hold decoder */
+
+	/* Used by the 3d driver only at this point, for pageflipping:
+	 */
+	unsigned int pfCurrentOffset;
+} drm_via_sarea_t;
+
+typedef struct _drm_via_cmdbuf_size {
+	enum {
+		VIA_CMDBUF_SPACE = 0x01,
+		VIA_CMDBUF_LAG = 0x02
+	} func;
+	int wait;
+	__u32 size;
+} drm_via_cmdbuf_size_t;
+
+typedef enum {
+	VIA_IRQ_ABSOLUTE = 0x0,
+	VIA_IRQ_RELATIVE = 0x1,
+	VIA_IRQ_SIGNAL = 0x10000000,
+	VIA_IRQ_FORCE_SEQUENCE = 0x20000000
+} via_irq_seq_type_t;
+
+#define VIA_IRQ_FLAGS_MASK 0xF0000000
+
+enum drm_via_irqs {
+	drm_via_irq_hqv0 = 0,
+	drm_via_irq_hqv1,
+	drm_via_irq_dma0_dd,
+	drm_via_irq_dma0_td,
+	drm_via_irq_dma1_dd,
+	drm_via_irq_dma1_td,
+	drm_via_irq_num
+};
+
+struct drm_via_wait_irq_request {
+	unsigned irq;
+	via_irq_seq_type_t type;
+	__u32 sequence;
+	__u32 signal;
+};
+
+typedef union drm_via_irqwait {
+	struct drm_via_wait_irq_request request;
+	struct drm_wait_vblank_reply reply;
+} drm_via_irqwait_t;
+
+typedef struct drm_via_blitsync {
+	__u32 sync_handle;
+	unsigned engine;
+} drm_via_blitsync_t;
+
+/* - * Below,"flags" is currently unused but will be used for possible future
+ * extensions like kernel space bounce buffers for bad alignments and
+ * blit engine busy-wait polling for better latency in the absence of
+ * interrupts.
+ */
+
+typedef struct drm_via_dmablit {
+	__u32 num_lines;
+	__u32 line_length;
+
+	__u32 fb_addr;
+	__u32 fb_stride;
+
+	unsigned char *mem_addr;
+	__u32 mem_stride;
+
+	__u32 flags;
+	int to_fb;
+
+	drm_via_blitsync_t sync;
+} drm_via_dmablit_t;
+
+struct via_file_private {
+	struct list_head obj_list;
+};
+
+#endif				/* _VIA_DRM_H_ */
diff --git a/include/drm/vmwgfx_drm.h b/include/drm/vmwgfx_drm.h
new file mode 100644
index 00000000..bcb0912a
--- /dev/null
+++ b/include/drm/vmwgfx_drm.h
@@ -0,0 +1,790 @@
+/**************************************************************************
+ *
+ * Copyright © 2009 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+
+#ifndef __VMWGFX_DRM_H__
+#define __VMWGFX_DRM_H__
+
+#define DRM_VMW_MAX_SURFACE_FACES 6
+#define DRM_VMW_MAX_MIP_LEVELS 24
+
+
+#define DRM_VMW_GET_PARAM            0
+#define DRM_VMW_ALLOC_DMABUF         1
+#define DRM_VMW_UNREF_DMABUF         2
+#define DRM_VMW_CURSOR_BYPASS        3
+/* guarded by DRM_VMW_PARAM_NUM_STREAMS != 0*/
+#define DRM_VMW_CONTROL_STREAM       4
+#define DRM_VMW_CLAIM_STREAM         5
+#define DRM_VMW_UNREF_STREAM         6
+/* guarded by DRM_VMW_PARAM_3D == 1 */
+#define DRM_VMW_CREATE_CONTEXT       7
+#define DRM_VMW_UNREF_CONTEXT        8
+#define DRM_VMW_CREATE_SURFACE       9
+#define DRM_VMW_UNREF_SURFACE        10
+#define DRM_VMW_REF_SURFACE          11
+#define DRM_VMW_EXECBUF              12
+#define DRM_VMW_GET_3D_CAP           13
+#define DRM_VMW_FENCE_WAIT           14
+#define DRM_VMW_FENCE_SIGNALED       15
+#define DRM_VMW_FENCE_UNREF          16
+#define DRM_VMW_FENCE_EVENT          17
+#define DRM_VMW_PRESENT              18
+#define DRM_VMW_PRESENT_READBACK     19
+#define DRM_VMW_UPDATE_LAYOUT        20
+
+/*************************************************************************/
+/**
+ * DRM_VMW_GET_PARAM - get device information.
+ *
+ * DRM_VMW_PARAM_FIFO_OFFSET:
+ * Offset to use to map the first page of the FIFO read-only.
+ * The fifo is mapped using the mmap() system call on the drm device.
+ *
+ * DRM_VMW_PARAM_OVERLAY_IOCTL:
+ * Does the driver support the overlay ioctl.
+ */
+
+#define DRM_VMW_PARAM_NUM_STREAMS      0
+#define DRM_VMW_PARAM_NUM_FREE_STREAMS 1
+#define DRM_VMW_PARAM_3D               2
+#define DRM_VMW_PARAM_HW_CAPS          3
+#define DRM_VMW_PARAM_FIFO_CAPS        4
+#define DRM_VMW_PARAM_MAX_FB_SIZE      5
+#define DRM_VMW_PARAM_FIFO_HW_VERSION  6
+
+/**
+ * struct drm_vmw_getparam_arg
+ *
+ * @value: Returned value. //Out
+ * @param: Parameter to query. //In.
+ *
+ * Argument to the DRM_VMW_GET_PARAM Ioctl.
+ */
+
+struct drm_vmw_getparam_arg {
+	uint64_t value;
+	uint32_t param;
+	uint32_t pad64;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_CREATE_CONTEXT - Create a host context.
+ *
+ * Allocates a device unique context id, and queues a create context command
+ * for the host. Does not wait for host completion.
+ */
+
+/**
+ * struct drm_vmw_context_arg
+ *
+ * @cid: Device unique context ID.
+ *
+ * Output argument to the DRM_VMW_CREATE_CONTEXT Ioctl.
+ * Input argument to the DRM_VMW_UNREF_CONTEXT Ioctl.
+ */
+
+struct drm_vmw_context_arg {
+	int32_t cid;
+	uint32_t pad64;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_UNREF_CONTEXT - Create a host context.
+ *
+ * Frees a global context id, and queues a destroy host command for the host.
+ * Does not wait for host completion. The context ID can be used directly
+ * in the command stream and shows up as the same context ID on the host.
+ */
+
+/*************************************************************************/
+/**
+ * DRM_VMW_CREATE_SURFACE - Create a host suface.
+ *
+ * Allocates a device unique surface id, and queues a create surface command
+ * for the host. Does not wait for host completion. The surface ID can be
+ * used directly in the command stream and shows up as the same surface
+ * ID on the host.
+ */
+
+/**
+ * struct drm_wmv_surface_create_req
+ *
+ * @flags: Surface flags as understood by the host.
+ * @format: Surface format as understood by the host.
+ * @mip_levels: Number of mip levels for each face.
+ * An unused face should have 0 encoded.
+ * @size_addr: Address of a user-space array of sruct drm_vmw_size
+ * cast to an uint64_t for 32-64 bit compatibility.
+ * The size of the array should equal the total number of mipmap levels.
+ * @shareable: Boolean whether other clients (as identified by file descriptors)
+ * may reference this surface.
+ * @scanout: Boolean whether the surface is intended to be used as a
+ * scanout.
+ *
+ * Input data to the DRM_VMW_CREATE_SURFACE Ioctl.
+ * Output data from the DRM_VMW_REF_SURFACE Ioctl.
+ */
+
+struct drm_vmw_surface_create_req {
+	uint32_t flags;
+	uint32_t format;
+	uint32_t mip_levels[DRM_VMW_MAX_SURFACE_FACES];
+	uint64_t size_addr;
+	int32_t shareable;
+	int32_t scanout;
+};
+
+/**
+ * struct drm_wmv_surface_arg
+ *
+ * @sid: Surface id of created surface or surface to destroy or reference.
+ *
+ * Output data from the DRM_VMW_CREATE_SURFACE Ioctl.
+ * Input argument to the DRM_VMW_UNREF_SURFACE Ioctl.
+ * Input argument to the DRM_VMW_REF_SURFACE Ioctl.
+ */
+
+struct drm_vmw_surface_arg {
+	int32_t sid;
+	uint32_t pad64;
+};
+
+/**
+ * struct drm_vmw_size ioctl.
+ *
+ * @width - mip level width
+ * @height - mip level height
+ * @depth - mip level depth
+ *
+ * Description of a mip level.
+ * Input data to the DRM_WMW_CREATE_SURFACE Ioctl.
+ */
+
+struct drm_vmw_size {
+	uint32_t width;
+	uint32_t height;
+	uint32_t depth;
+	uint32_t pad64;
+};
+
+/**
+ * union drm_vmw_surface_create_arg
+ *
+ * @rep: Output data as described above.
+ * @req: Input data as described above.
+ *
+ * Argument to the DRM_VMW_CREATE_SURFACE Ioctl.
+ */
+
+union drm_vmw_surface_create_arg {
+	struct drm_vmw_surface_arg rep;
+	struct drm_vmw_surface_create_req req;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_REF_SURFACE - Reference a host surface.
+ *
+ * Puts a reference on a host surface with a give sid, as previously
+ * returned by the DRM_VMW_CREATE_SURFACE ioctl.
+ * A reference will make sure the surface isn't destroyed while we hold
+ * it and will allow the calling client to use the surface ID in the command
+ * stream.
+ *
+ * On successful return, the Ioctl returns the surface information given
+ * in the DRM_VMW_CREATE_SURFACE ioctl.
+ */
+
+/**
+ * union drm_vmw_surface_reference_arg
+ *
+ * @rep: Output data as described above.
+ * @req: Input data as described above.
+ *
+ * Argument to the DRM_VMW_REF_SURFACE Ioctl.
+ */
+
+union drm_vmw_surface_reference_arg {
+	struct drm_vmw_surface_create_req rep;
+	struct drm_vmw_surface_arg req;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_UNREF_SURFACE - Unreference a host surface.
+ *
+ * Clear a reference previously put on a host surface.
+ * When all references are gone, including the one implicitly placed
+ * on creation,
+ * a destroy surface command will be queued for the host.
+ * Does not wait for completion.
+ */
+
+/*************************************************************************/
+/**
+ * DRM_VMW_EXECBUF
+ *
+ * Submit a command buffer for execution on the host, and return a
+ * fence seqno that when signaled, indicates that the command buffer has
+ * executed.
+ */
+
+/**
+ * struct drm_vmw_execbuf_arg
+ *
+ * @commands: User-space address of a command buffer cast to an uint64_t.
+ * @command-size: Size in bytes of the command buffer.
+ * @throttle-us: Sleep until software is less than @throttle_us
+ * microseconds ahead of hardware. The driver may round this value
+ * to the nearest kernel tick.
+ * @fence_rep: User-space address of a struct drm_vmw_fence_rep cast to an
+ * uint64_t.
+ * @version: Allows expanding the execbuf ioctl parameters without breaking
+ * backwards compatibility, since user-space will always tell the kernel
+ * which version it uses.
+ * @flags: Execbuf flags. None currently.
+ *
+ * Argument to the DRM_VMW_EXECBUF Ioctl.
+ */
+
+#define DRM_VMW_EXECBUF_VERSION 1
+
+struct drm_vmw_execbuf_arg {
+	uint64_t commands;
+	uint32_t command_size;
+	uint32_t throttle_us;
+	uint64_t fence_rep;
+	uint32_t version;
+	uint32_t flags;
+};
+
+/**
+ * struct drm_vmw_fence_rep
+ *
+ * @handle: Fence object handle for fence associated with a command submission.
+ * @mask: Fence flags relevant for this fence object.
+ * @seqno: Fence sequence number in fifo. A fence object with a lower
+ * seqno will signal the EXEC flag before a fence object with a higher
+ * seqno. This can be used by user-space to avoid kernel calls to determine
+ * whether a fence has signaled the EXEC flag. Note that @seqno will
+ * wrap at 32-bit.
+ * @passed_seqno: The highest seqno number processed by the hardware
+ * so far. This can be used to mark user-space fence objects as signaled, and
+ * to determine whether a fence seqno might be stale.
+ * @error: This member should've been set to -EFAULT on submission.
+ * The following actions should be take on completion:
+ * error == -EFAULT: Fence communication failed. The host is synchronized.
+ * Use the last fence id read from the FIFO fence register.
+ * error != 0 && error != -EFAULT:
+ * Fence submission failed. The host is synchronized. Use the fence_seq member.
+ * error == 0: All is OK, The host may not be synchronized.
+ * Use the fence_seq member.
+ *
+ * Input / Output data to the DRM_VMW_EXECBUF Ioctl.
+ */
+
+struct drm_vmw_fence_rep {
+	uint32_t handle;
+	uint32_t mask;
+	uint32_t seqno;
+	uint32_t passed_seqno;
+	uint32_t pad64;
+	int32_t error;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_ALLOC_DMABUF
+ *
+ * Allocate a DMA buffer that is visible also to the host.
+ * NOTE: The buffer is
+ * identified by a handle and an offset, which are private to the guest, but
+ * useable in the command stream. The guest kernel may translate these
+ * and patch up the command stream accordingly. In the future, the offset may
+ * be zero at all times, or it may disappear from the interface before it is
+ * fixed.
+ *
+ * The DMA buffer may stay user-space mapped in the guest at all times,
+ * and is thus suitable for sub-allocation.
+ *
+ * DMA buffers are mapped using the mmap() syscall on the drm device.
+ */
+
+/**
+ * struct drm_vmw_alloc_dmabuf_req
+ *
+ * @size: Required minimum size of the buffer.
+ *
+ * Input data to the DRM_VMW_ALLOC_DMABUF Ioctl.
+ */
+
+struct drm_vmw_alloc_dmabuf_req {
+	uint32_t size;
+	uint32_t pad64;
+};
+
+/**
+ * struct drm_vmw_dmabuf_rep
+ *
+ * @map_handle: Offset to use in the mmap() call used to map the buffer.
+ * @handle: Handle unique to this buffer. Used for unreferencing.
+ * @cur_gmr_id: GMR id to use in the command stream when this buffer is
+ * referenced. See not above.
+ * @cur_gmr_offset: Offset to use in the command stream when this buffer is
+ * referenced. See note above.
+ *
+ * Output data from the DRM_VMW_ALLOC_DMABUF Ioctl.
+ */
+
+struct drm_vmw_dmabuf_rep {
+	uint64_t map_handle;
+	uint32_t handle;
+	uint32_t cur_gmr_id;
+	uint32_t cur_gmr_offset;
+	uint32_t pad64;
+};
+
+/**
+ * union drm_vmw_dmabuf_arg
+ *
+ * @req: Input data as described above.
+ * @rep: Output data as described above.
+ *
+ * Argument to the DRM_VMW_ALLOC_DMABUF Ioctl.
+ */
+
+union drm_vmw_alloc_dmabuf_arg {
+	struct drm_vmw_alloc_dmabuf_req req;
+	struct drm_vmw_dmabuf_rep rep;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_UNREF_DMABUF - Free a DMA buffer.
+ *
+ */
+
+/**
+ * struct drm_vmw_unref_dmabuf_arg
+ *
+ * @handle: Handle indicating what buffer to free. Obtained from the
+ * DRM_VMW_ALLOC_DMABUF Ioctl.
+ *
+ * Argument to the DRM_VMW_UNREF_DMABUF Ioctl.
+ */
+
+struct drm_vmw_unref_dmabuf_arg {
+	uint32_t handle;
+	uint32_t pad64;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_CONTROL_STREAM - Control overlays, aka streams.
+ *
+ * This IOCTL controls the overlay units of the svga device.
+ * The SVGA overlay units does not work like regular hardware units in
+ * that they do not automaticaly read back the contents of the given dma
+ * buffer. But instead only read back for each call to this ioctl, and
+ * at any point between this call being made and a following call that
+ * either changes the buffer or disables the stream.
+ */
+
+/**
+ * struct drm_vmw_rect
+ *
+ * Defines a rectangle. Used in the overlay ioctl to define
+ * source and destination rectangle.
+ */
+
+struct drm_vmw_rect {
+	int32_t x;
+	int32_t y;
+	uint32_t w;
+	uint32_t h;
+};
+
+/**
+ * struct drm_vmw_control_stream_arg
+ *
+ * @stream_id: Stearm to control
+ * @enabled: If false all following arguments are ignored.
+ * @handle: Handle to buffer for getting data from.
+ * @format: Format of the overlay as understood by the host.
+ * @width: Width of the overlay.
+ * @height: Height of the overlay.
+ * @size: Size of the overlay in bytes.
+ * @pitch: Array of pitches, the two last are only used for YUV12 formats.
+ * @offset: Offset from start of dma buffer to overlay.
+ * @src: Source rect, must be within the defined area above.
+ * @dst: Destination rect, x and y may be negative.
+ *
+ * Argument to the DRM_VMW_CONTROL_STREAM Ioctl.
+ */
+
+struct drm_vmw_control_stream_arg {
+	uint32_t stream_id;
+	uint32_t enabled;
+
+	uint32_t flags;
+	uint32_t color_key;
+
+	uint32_t handle;
+	uint32_t offset;
+	int32_t format;
+	uint32_t size;
+	uint32_t width;
+	uint32_t height;
+	uint32_t pitch[3];
+
+	uint32_t pad64;
+	struct drm_vmw_rect src;
+	struct drm_vmw_rect dst;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_CURSOR_BYPASS - Give extra information about cursor bypass.
+ *
+ */
+
+#define DRM_VMW_CURSOR_BYPASS_ALL    (1 << 0)
+#define DRM_VMW_CURSOR_BYPASS_FLAGS       (1)
+
+/**
+ * struct drm_vmw_cursor_bypass_arg
+ *
+ * @flags: Flags.
+ * @crtc_id: Crtc id, only used if DMR_CURSOR_BYPASS_ALL isn't passed.
+ * @xpos: X position of cursor.
+ * @ypos: Y position of cursor.
+ * @xhot: X hotspot.
+ * @yhot: Y hotspot.
+ *
+ * Argument to the DRM_VMW_CURSOR_BYPASS Ioctl.
+ */
+
+struct drm_vmw_cursor_bypass_arg {
+	uint32_t flags;
+	uint32_t crtc_id;
+	int32_t xpos;
+	int32_t ypos;
+	int32_t xhot;
+	int32_t yhot;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_CLAIM_STREAM - Claim a single stream.
+ */
+
+/**
+ * struct drm_vmw_context_arg
+ *
+ * @stream_id: Device unique context ID.
+ *
+ * Output argument to the DRM_VMW_CREATE_CONTEXT Ioctl.
+ * Input argument to the DRM_VMW_UNREF_CONTEXT Ioctl.
+ */
+
+struct drm_vmw_stream_arg {
+	uint32_t stream_id;
+	uint32_t pad64;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_UNREF_STREAM - Unclaim a stream.
+ *
+ * Return a single stream that was claimed by this process. Also makes
+ * sure that the stream has been stopped.
+ */
+
+/*************************************************************************/
+/**
+ * DRM_VMW_GET_3D_CAP
+ *
+ * Read 3D capabilities from the FIFO
+ *
+ */
+
+/**
+ * struct drm_vmw_get_3d_cap_arg
+ *
+ * @buffer: Pointer to a buffer for capability data, cast to an uint64_t
+ * @size: Max size to copy
+ *
+ * Input argument to the DRM_VMW_GET_3D_CAP_IOCTL
+ * ioctls.
+ */
+
+struct drm_vmw_get_3d_cap_arg {
+	uint64_t buffer;
+	uint32_t max_size;
+	uint32_t pad64;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_FENCE_WAIT
+ *
+ * Waits for a fence object to signal. The wait is interruptible, so that
+ * signals may be delivered during the interrupt. The wait may timeout,
+ * in which case the calls returns -EBUSY. If the wait is restarted,
+ * that is restarting without resetting @cookie_valid to zero,
+ * the timeout is computed from the first call.
+ *
+ * The flags argument to the DRM_VMW_FENCE_WAIT ioctl indicates what to wait
+ * on:
+ * DRM_VMW_FENCE_FLAG_EXEC: All commands ahead of the fence in the command
+ * stream
+ * have executed.
+ * DRM_VMW_FENCE_FLAG_QUERY: All query results resulting from query finish
+ * commands
+ * in the buffer given to the EXECBUF ioctl returning the fence object handle
+ * are available to user-space.
+ *
+ * DRM_VMW_WAIT_OPTION_UNREF: If this wait option is given, and the
+ * fenc wait ioctl returns 0, the fence object has been unreferenced after
+ * the wait.
+ */
+
+#define DRM_VMW_FENCE_FLAG_EXEC   (1 << 0)
+#define DRM_VMW_FENCE_FLAG_QUERY  (1 << 1)
+
+#define DRM_VMW_WAIT_OPTION_UNREF (1 << 0)
+
+/**
+ * struct drm_vmw_fence_wait_arg
+ *
+ * @handle: Fence object handle as returned by the DRM_VMW_EXECBUF ioctl.
+ * @cookie_valid: Must be reset to 0 on first call. Left alone on restart.
+ * @kernel_cookie: Set to 0 on first call. Left alone on restart.
+ * @timeout_us: Wait timeout in microseconds. 0 for indefinite timeout.
+ * @lazy: Set to 1 if timing is not critical. Allow more than a kernel tick
+ * before returning.
+ * @flags: Fence flags to wait on.
+ * @wait_options: Options that control the behaviour of the wait ioctl.
+ *
+ * Input argument to the DRM_VMW_FENCE_WAIT ioctl.
+ */
+
+struct drm_vmw_fence_wait_arg {
+	uint32_t handle;
+	int32_t  cookie_valid;
+	uint64_t kernel_cookie;
+	uint64_t timeout_us;
+	int32_t lazy;
+	int32_t flags;
+	int32_t wait_options;
+	int32_t pad64;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_FENCE_SIGNALED
+ *
+ * Checks if a fence object is signaled..
+ */
+
+/**
+ * struct drm_vmw_fence_signaled_arg
+ *
+ * @handle: Fence object handle as returned by the DRM_VMW_EXECBUF ioctl.
+ * @flags: Fence object flags input to DRM_VMW_FENCE_SIGNALED ioctl
+ * @signaled: Out: Flags signaled.
+ * @sequence: Out: Highest sequence passed so far. Can be used to signal the
+ * EXEC flag of user-space fence objects.
+ *
+ * Input/Output argument to the DRM_VMW_FENCE_SIGNALED and DRM_VMW_FENCE_UNREF
+ * ioctls.
+ */
+
+struct drm_vmw_fence_signaled_arg {
+	 uint32_t handle;
+	 uint32_t flags;
+	 int32_t signaled;
+	 uint32_t passed_seqno;
+	 uint32_t signaled_flags;
+	 uint32_t pad64;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_FENCE_UNREF
+ *
+ * Unreferences a fence object, and causes it to be destroyed if there are no
+ * other references to it.
+ *
+ */
+
+/**
+ * struct drm_vmw_fence_arg
+ *
+ * @handle: Fence object handle as returned by the DRM_VMW_EXECBUF ioctl.
+ *
+ * Input/Output argument to the DRM_VMW_FENCE_UNREF ioctl..
+ */
+
+struct drm_vmw_fence_arg {
+	 uint32_t handle;
+	 uint32_t pad64;
+};
+
+
+/*************************************************************************/
+/**
+ * DRM_VMW_FENCE_EVENT
+ *
+ * Queues an event on a fence to be delivered on the drm character device
+ * when the fence has signaled the DRM_VMW_FENCE_FLAG_EXEC flag.
+ * Optionally the approximate time when the fence signaled is
+ * given by the event.
+ */
+
+/*
+ * The event type
+ */
+#define DRM_VMW_EVENT_FENCE_SIGNALED 0x80000000
+
+struct drm_vmw_event_fence {
+	struct drm_event base;
+	uint64_t user_data;
+	uint32_t tv_sec;
+	uint32_t tv_usec;
+};
+
+/*
+ * Flags that may be given to the command.
+ */
+/* Request fence signaled time on the event. */
+#define DRM_VMW_FE_FLAG_REQ_TIME (1 << 0)
+
+/**
+ * struct drm_vmw_fence_event_arg
+ *
+ * @fence_rep: Pointer to fence_rep structure cast to uint64_t or 0 if
+ * the fence is not supposed to be referenced by user-space.
+ * @user_info: Info to be delivered with the event.
+ * @handle: Attach the event to this fence only.
+ * @flags: A set of flags as defined above.
+ */
+struct drm_vmw_fence_event_arg {
+	uint64_t fence_rep;
+	uint64_t user_data;
+	uint32_t handle;
+	uint32_t flags;
+};
+
+
+/*************************************************************************/
+/**
+ * DRM_VMW_PRESENT
+ *
+ * Executes an SVGA present on a given fb for a given surface. The surface
+ * is placed on the framebuffer. Cliprects are given relative to the given
+ * point (the point disignated by dest_{x|y}).
+ *
+ */
+
+/**
+ * struct drm_vmw_present_arg
+ * @fb_id: framebuffer id to present / read back from.
+ * @sid: Surface id to present from.
+ * @dest_x: X placement coordinate for surface.
+ * @dest_y: Y placement coordinate for surface.
+ * @clips_ptr: Pointer to an array of clip rects cast to an uint64_t.
+ * @num_clips: Number of cliprects given relative to the framebuffer origin,
+ * in the same coordinate space as the frame buffer.
+ * @pad64: Unused 64-bit padding.
+ *
+ * Input argument to the DRM_VMW_PRESENT ioctl.
+ */
+
+struct drm_vmw_present_arg {
+	uint32_t fb_id;
+	uint32_t sid;
+	int32_t dest_x;
+	int32_t dest_y;
+	uint64_t clips_ptr;
+	uint32_t num_clips;
+	uint32_t pad64;
+};
+
+
+/*************************************************************************/
+/**
+ * DRM_VMW_PRESENT_READBACK
+ *
+ * Executes an SVGA present readback from a given fb to the dma buffer
+ * currently bound as the fb. If there is no dma buffer bound to the fb,
+ * an error will be returned.
+ *
+ */
+
+/**
+ * struct drm_vmw_present_arg
+ * @fb_id: fb_id to present / read back from.
+ * @num_clips: Number of cliprects.
+ * @clips_ptr: Pointer to an array of clip rects cast to an uint64_t.
+ * @fence_rep: Pointer to a struct drm_vmw_fence_rep, cast to an uint64_t.
+ * If this member is NULL, then the ioctl should not return a fence.
+ */
+
+struct drm_vmw_present_readback_arg {
+	 uint32_t fb_id;
+	 uint32_t num_clips;
+	 uint64_t clips_ptr;
+	 uint64_t fence_rep;
+};
+
+/*************************************************************************/
+/**
+ * DRM_VMW_UPDATE_LAYOUT - Update layout
+ *
+ * Updates the preferred modes and connection status for connectors. The
+ * command consists of one drm_vmw_update_layout_arg pointing to an array
+ * of num_outputs drm_vmw_rect's.
+ */
+
+/**
+ * struct drm_vmw_update_layout_arg
+ *
+ * @num_outputs: number of active connectors
+ * @rects: pointer to array of drm_vmw_rect cast to an uint64_t
+ *
+ * Input argument to the DRM_VMW_UPDATE_LAYOUT Ioctl.
+ */
+struct drm_vmw_update_layout_arg {
+	uint32_t num_outputs;
+	uint32_t pad64;
+	uint64_t rects;
+};
+
+#endif
diff --git a/include/keys/ceph-type.h b/include/keys/ceph-type.h
new file mode 100644
index 00000000..f69c4ac1
--- /dev/null
+++ b/include/keys/ceph-type.h
@@ -0,0 +1,8 @@
+#ifndef _KEYS_CEPH_TYPE_H
+#define _KEYS_CEPH_TYPE_H
+
+#include <linux/key.h>
+
+extern struct key_type key_type_ceph;
+
+#endif
diff --git a/include/keys/dns_resolver-type.h b/include/keys/dns_resolver-type.h
new file mode 100644
index 00000000..9284a193
--- /dev/null
+++ b/include/keys/dns_resolver-type.h
@@ -0,0 +1,23 @@
+/* DNS resolver key type
+ *
+ * Copyright (C) 2010 Wang Lei. All Rights Reserved.
+ * Written by Wang Lei (wang840925@gmail.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _KEYS_DNS_RESOLVER_TYPE_H
+#define _KEYS_DNS_RESOLVER_TYPE_H
+
+#include <linux/key-type.h>
+
+extern struct key_type key_type_dns_resolver;
+
+extern int request_dns_resolver_key(const char *description,
+				    const char *callout_info,
+				    char **data);
+
+#endif /* _KEYS_DNS_RESOLVER_TYPE_H */
diff --git a/include/keys/encrypted-type.h b/include/keys/encrypted-type.h
new file mode 100644
index 00000000..1d454137
--- /dev/null
+++ b/include/keys/encrypted-type.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2010 IBM Corporation
+ * Copyright (C) 2010 Politecnico di Torino, Italy
+ *                    TORSEC group -- http://security.polito.it
+ *
+ * Authors:
+ * Mimi Zohar <zohar@us.ibm.com>
+ * Roberto Sassu <roberto.sassu@polito.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, version 2 of the License.
+ */
+
+#ifndef _KEYS_ENCRYPTED_TYPE_H
+#define _KEYS_ENCRYPTED_TYPE_H
+
+#include <linux/key.h>
+#include <linux/rcupdate.h>
+
+struct encrypted_key_payload {
+	struct rcu_head rcu;
+	char *format;		/* datablob: format */
+	char *master_desc;	/* datablob: master key name */
+	char *datalen;		/* datablob: decrypted key length */
+	u8 *iv;			/* datablob: iv */
+	u8 *encrypted_data;	/* datablob: encrypted data */
+	unsigned short datablob_len;	/* length of datablob */
+	unsigned short decrypted_datalen;	/* decrypted data length */
+	unsigned short payload_datalen;		/* payload data length */
+	unsigned short encrypted_key_format;	/* encrypted key format */
+	u8 *decrypted_data;	/* decrypted data */
+	u8 payload_data[0];	/* payload data + datablob + hmac */
+};
+
+extern struct key_type key_type_encrypted;
+
+#endif /* _KEYS_ENCRYPTED_TYPE_H */
diff --git a/include/keys/keyring-type.h b/include/keys/keyring-type.h
new file mode 100644
index 00000000..843f872a
--- /dev/null
+++ b/include/keys/keyring-type.h
@@ -0,0 +1,31 @@
+/* Keyring key type
+ *
+ * Copyright (C) 2008 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _KEYS_KEYRING_TYPE_H
+#define _KEYS_KEYRING_TYPE_H
+
+#include <linux/key.h>
+#include <linux/rcupdate.h>
+
+/*
+ * the keyring payload contains a list of the keys to which the keyring is
+ * subscribed
+ */
+struct keyring_list {
+	struct rcu_head	rcu;		/* RCU deletion hook */
+	unsigned short	maxkeys;	/* max keys this list can hold */
+	unsigned short	nkeys;		/* number of keys currently held */
+	unsigned short	delkey;		/* key to be unlinked by RCU */
+	struct key	*keys[0];
+};
+
+
+#endif /* _KEYS_KEYRING_TYPE_H */
diff --git a/include/keys/rxrpc-type.h b/include/keys/rxrpc-type.h
new file mode 100644
index 00000000..fc487543
--- /dev/null
+++ b/include/keys/rxrpc-type.h
@@ -0,0 +1,130 @@
+/* RxRPC key type
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _KEYS_RXRPC_TYPE_H
+#define _KEYS_RXRPC_TYPE_H
+
+#include <linux/key.h>
+
+/*
+ * key type for AF_RXRPC keys
+ */
+extern struct key_type key_type_rxrpc;
+
+extern struct key *rxrpc_get_null_key(const char *);
+
+/*
+ * RxRPC key for Kerberos IV (type-2 security)
+ */
+struct rxkad_key {
+	u32	vice_id;
+	u32	start;			/* time at which ticket starts */
+	u32	expiry;			/* time at which ticket expires */
+	u32	kvno;			/* key version number */
+	u8	primary_flag;		/* T if key for primary cell for this user */
+	u16	ticket_len;		/* length of ticket[] */
+	u8	session_key[8];		/* DES session key */
+	u8	ticket[0];		/* the encrypted ticket */
+};
+
+/*
+ * Kerberos 5 principal
+ *	name/name/name@realm
+ */
+struct krb5_principal {
+	u8	n_name_parts;		/* N of parts of the name part of the principal */
+	char	**name_parts;		/* parts of the name part of the principal */
+	char	*realm;			/* parts of the realm part of the principal */
+};
+
+/*
+ * Kerberos 5 tagged data
+ */
+struct krb5_tagged_data {
+	/* for tag value, see /usr/include/krb5/krb5.h
+	 * - KRB5_AUTHDATA_* for auth data
+	 * - 
+	 */
+	s32		tag;
+	u32		data_len;
+	u8		*data;
+};
+
+/*
+ * RxRPC key for Kerberos V (type-5 security)
+ */
+struct rxk5_key {
+	u64			authtime;	/* time at which auth token generated */
+	u64			starttime;	/* time at which auth token starts */
+	u64			endtime;	/* time at which auth token expired */
+	u64			renew_till;	/* time to which auth token can be renewed */
+	s32			is_skey;	/* T if ticket is encrypted in another ticket's
+						 * skey */
+	s32			flags;		/* mask of TKT_FLG_* bits (krb5/krb5.h) */
+	struct krb5_principal	client;		/* client principal name */
+	struct krb5_principal	server;		/* server principal name */
+	u16			ticket_len;	/* length of ticket */
+	u16			ticket2_len;	/* length of second ticket */
+	u8			n_authdata;	/* number of authorisation data elements */
+	u8			n_addresses;	/* number of addresses */
+	struct krb5_tagged_data	session;	/* session data; tag is enctype */
+	struct krb5_tagged_data *addresses;	/* addresses */
+	u8			*ticket;	/* krb5 ticket */
+	u8			*ticket2;	/* second krb5 ticket, if related to ticket (via
+						 * DUPLICATE-SKEY or ENC-TKT-IN-SKEY) */
+	struct krb5_tagged_data *authdata;	/* authorisation data */
+};
+
+/*
+ * list of tokens attached to an rxrpc key
+ */
+struct rxrpc_key_token {
+	u16	security_index;		/* RxRPC header security index */
+	struct rxrpc_key_token *next;	/* the next token in the list */
+	union {
+		struct rxkad_key *kad;
+		struct rxk5_key *k5;
+	};
+};
+
+/*
+ * structure of raw payloads passed to add_key() or instantiate key
+ */
+struct rxrpc_key_data_v1 {
+	u16		security_index;
+	u16		ticket_length;
+	u32		expiry;			/* time_t */
+	u32		kvno;
+	u8		session_key[8];
+	u8		ticket[0];
+};
+
+/*
+ * AF_RXRPC key payload derived from XDR format
+ * - based on openafs-1.4.10/src/auth/afs_token.xg
+ */
+#define AFSTOKEN_LENGTH_MAX		16384	/* max payload size */
+#define AFSTOKEN_STRING_MAX		256	/* max small string length */
+#define AFSTOKEN_DATA_MAX		64	/* max small data length */
+#define AFSTOKEN_CELL_MAX		64	/* max cellname length */
+#define AFSTOKEN_MAX			8	/* max tokens per payload */
+#define AFSTOKEN_BDATALN_MAX		16384	/* max big data length */
+#define AFSTOKEN_RK_TIX_MAX		12000	/* max RxKAD ticket size */
+#define AFSTOKEN_GK_KEY_MAX		64	/* max GSSAPI key size */
+#define AFSTOKEN_GK_TOKEN_MAX		16384	/* max GSSAPI token size */
+#define AFSTOKEN_K5_COMPONENTS_MAX	16	/* max K5 components */
+#define AFSTOKEN_K5_NAME_MAX		128	/* max K5 name length */
+#define AFSTOKEN_K5_REALM_MAX		64	/* max K5 realm name length */
+#define AFSTOKEN_K5_TIX_MAX		16384	/* max K5 ticket size */
+#define AFSTOKEN_K5_ADDRESSES_MAX	16	/* max K5 addresses */
+#define AFSTOKEN_K5_AUTHDATA_MAX	16	/* max K5 pieces of auth data */
+
+#endif /* _KEYS_RXRPC_TYPE_H */
diff --git a/include/keys/trusted-type.h b/include/keys/trusted-type.h
new file mode 100644
index 00000000..56f82e5c
--- /dev/null
+++ b/include/keys/trusted-type.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2010 IBM Corporation
+ * Author: David Safford <safford@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, version 2 of the License.
+ */
+
+#ifndef _KEYS_TRUSTED_TYPE_H
+#define _KEYS_TRUSTED_TYPE_H
+
+#include <linux/key.h>
+#include <linux/rcupdate.h>
+
+#define MIN_KEY_SIZE			32
+#define MAX_KEY_SIZE			128
+#define MAX_BLOB_SIZE			320
+
+struct trusted_key_payload {
+	struct rcu_head rcu;
+	unsigned int key_len;
+	unsigned int blob_len;
+	unsigned char migratable;
+	unsigned char key[MAX_KEY_SIZE + 1];
+	unsigned char blob[MAX_BLOB_SIZE];
+};
+
+extern struct key_type key_type_trusted;
+
+#endif /* _KEYS_TRUSTED_TYPE_H */
diff --git a/include/keys/user-type.h b/include/keys/user-type.h
new file mode 100644
index 00000000..bc9ec1d7
--- /dev/null
+++ b/include/keys/user-type.h
@@ -0,0 +1,48 @@
+/* user-type.h: User-defined key type
+ *
+ * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _KEYS_USER_TYPE_H
+#define _KEYS_USER_TYPE_H
+
+#include <linux/key.h>
+#include <linux/rcupdate.h>
+
+/*****************************************************************************/
+/*
+ * the payload for a key of type "user" or "logon"
+ * - once filled in and attached to a key:
+ *   - the payload struct is invariant may not be changed, only replaced
+ *   - the payload must be read with RCU procedures or with the key semaphore
+ *     held
+ *   - the payload may only be replaced with the key semaphore write-locked
+ * - the key's data length is the size of the actual data, not including the
+ *   payload wrapper
+ */
+struct user_key_payload {
+	struct rcu_head	rcu;		/* RCU destructor */
+	unsigned short	datalen;	/* length of this data */
+	char		data[0];	/* actual data */
+};
+
+extern struct key_type key_type_user;
+extern struct key_type key_type_logon;
+
+extern int user_instantiate(struct key *key, const void *data, size_t datalen);
+extern int user_update(struct key *key, const void *data, size_t datalen);
+extern int user_match(const struct key *key, const void *criterion);
+extern void user_revoke(struct key *key);
+extern void user_destroy(struct key *key);
+extern void user_describe(const struct key *user, struct seq_file *m);
+extern long user_read(const struct key *key,
+		      char __user *buffer, size_t buflen);
+
+
+#endif /* _KEYS_USER_TYPE_H */
diff --git a/include/linux/8250_pci.h b/include/linux/8250_pci.h
new file mode 100644
index 00000000..b24ff086
--- /dev/null
+++ b/include/linux/8250_pci.h
@@ -0,0 +1,37 @@
+/*
+ * Definitions for PCI support.
+ */
+#define FL_BASE_MASK		0x0007
+#define FL_BASE0		0x0000
+#define FL_BASE1		0x0001
+#define FL_BASE2		0x0002
+#define FL_BASE3		0x0003
+#define FL_BASE4		0x0004
+#define FL_GET_BASE(x)		(x & FL_BASE_MASK)
+
+/* Use successive BARs (PCI base address registers),
+   else use offset into some specified BAR */
+#define FL_BASE_BARS		0x0008
+
+/* do not assign an irq */
+#define FL_NOIRQ		0x0080
+
+/* Use the Base address register size to cap number of ports */
+#define FL_REGION_SZ_CAP	0x0100
+
+struct pciserial_board {
+	unsigned int flags;
+	unsigned int num_ports;
+	unsigned int base_baud;
+	unsigned int uart_offset;
+	unsigned int reg_shift;
+	unsigned int first_offset;
+};
+
+struct serial_private;
+
+struct serial_private *
+pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board);
+void pciserial_remove_ports(struct serial_private *priv);
+void pciserial_suspend_ports(struct serial_private *priv);
+void pciserial_resume_ports(struct serial_private *priv);
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
new file mode 100644
index 00000000..fb53cda1
--- /dev/null
+++ b/include/linux/Kbuild
@@ -0,0 +1,412 @@
+header-y += byteorder/
+header-y += can/
+header-y += caif/
+header-y += dvb/
+header-y += hdlc/
+header-y += hsi/
+header-y += isdn/
+header-y += mmc/
+header-y += nfsd/
+header-y += raid/
+header-y += spi/
+header-y += sunrpc/
+header-y += tc_act/
+header-y += tc_ematch/
+header-y += netfilter/
+header-y += netfilter_arp/
+header-y += netfilter_bridge/
+header-y += netfilter_ipv4/
+header-y += netfilter_ipv6/
+header-y += usb/
+header-y += wimax/
+
+objhdr-y += version.h
+
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \
+		  $(srctree)/include/asm-$(SRCARCH)/a.out.h \
+		  $(INSTALL_HDR_PATH)/include/asm-*/a.out.h),)
+header-y += a.out.h
+endif
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \
+		  $(srctree)/include/asm-$(SRCARCH)/kvm.h \
+		  $(INSTALL_HDR_PATH)/include/asm-*/kvm.h),)
+header-y += kvm.h
+endif
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h \
+		  $(srctree)/include/asm-$(SRCARCH)/kvm_para.h \
+		  $(INSTALL_HDR_PATH)/include/asm-*/kvm_para.h),)
+header-y += kvm_para.h
+endif
+
+header-y += acct.h
+header-y += adb.h
+header-y += adfs_fs.h
+header-y += affs_hardblocks.h
+header-y += agpgart.h
+header-y += aio_abi.h
+header-y += apm_bios.h
+header-y += arcfb.h
+header-y += atalk.h
+header-y += atm.h
+header-y += atm_eni.h
+header-y += atm_he.h
+header-y += atm_idt77105.h
+header-y += atm_nicstar.h
+header-y += atm_tcp.h
+header-y += atm_zatm.h
+header-y += atmapi.h
+header-y += atmarp.h
+header-y += atmbr2684.h
+header-y += atmclip.h
+header-y += atmdev.h
+header-y += atmioc.h
+header-y += atmlec.h
+header-y += atmmpc.h
+header-y += atmppp.h
+header-y += atmsap.h
+header-y += atmsvc.h
+header-y += audit.h
+header-y += auto_fs.h
+header-y += auto_fs4.h
+header-y += auxvec.h
+header-y += ax25.h
+header-y += b1lli.h
+header-y += baycom.h
+header-y += bfs_fs.h
+header-y += binfmts.h
+header-y += blk_types.h
+header-y += blkpg.h
+header-y += blktrace_api.h
+header-y += bpqether.h
+header-y += bsg.h
+header-y += can.h
+header-y += capability.h
+header-y += capi.h
+header-y += cciss_defs.h
+header-y += cciss_ioctl.h
+header-y += cdk.h
+header-y += cdrom.h
+header-y += cgroupstats.h
+header-y += chio.h
+header-y += cm4000_cs.h
+header-y += cn_proc.h
+header-y += coda.h
+header-y += coda_psdev.h
+header-y += coff.h
+header-y += comstats.h
+header-y += connector.h
+header-y += const.h
+header-y += cramfs_fs.h
+header-y += cuda.h
+header-y += cyclades.h
+header-y += cycx_cfm.h
+header-y += dcbnl.h
+header-y += dccp.h
+header-y += dlm.h
+header-y += dlm_device.h
+header-y += dlm_netlink.h
+header-y += dlm_plock.h
+header-y += dlmconstants.h
+header-y += dm-ioctl.h
+header-y += dm-log-userspace.h
+header-y += dn.h
+header-y += dqblk_xfs.h
+header-y += edd.h
+header-y += efs_fs_sb.h
+header-y += elf-em.h
+header-y += elf-fdpic.h
+header-y += elf.h
+header-y += elfcore.h
+header-y += errno.h
+header-y += errqueue.h
+header-y += ethtool.h
+header-y += eventpoll.h
+header-y += fadvise.h
+header-y += falloc.h
+header-y += fanotify.h
+header-y += fb.h
+header-y += fcntl.h
+header-y += fd.h
+header-y += fdreg.h
+header-y += fib_rules.h
+header-y += fiemap.h
+header-y += filter.h
+header-y += firewire-cdev.h
+header-y += firewire-constants.h
+header-y += flat.h
+header-y += fs.h
+header-y += fsl_hypervisor.h
+header-y += fuse.h
+header-y += futex.h
+header-y += gameport.h
+header-y += gen_stats.h
+header-y += generic_serial.h
+header-y += genetlink.h
+header-y += gfs2_ondisk.h
+header-y += gigaset_dev.h
+header-y += hdlc.h
+header-y += hdlcdrv.h
+header-y += hdreg.h
+header-y += hid.h
+header-y += hiddev.h
+header-y += hidraw.h
+header-y += hpet.h
+header-y += hysdn_if.h
+header-y += i2c-dev.h
+header-y += i2c.h
+header-y += i2o-dev.h
+header-y += i8k.h
+header-y += icmp.h
+header-y += icmpv6.h
+header-y += if.h
+header-y += if_addr.h
+header-y += if_addrlabel.h
+header-y += if_alg.h
+header-y += if_arcnet.h
+header-y += if_arp.h
+header-y += if_bonding.h
+header-y += if_bridge.h
+header-y += if_cablemodem.h
+header-y += if_ec.h
+header-y += if_eql.h
+header-y += if_ether.h
+header-y += if_fc.h
+header-y += if_fddi.h
+header-y += if_frad.h
+header-y += if_hippi.h
+header-y += if_infiniband.h
+header-y += if_link.h
+header-y += if_ltalk.h
+header-y += if_packet.h
+header-y += if_phonet.h
+header-y += if_plip.h
+header-y += if_ppp.h
+header-y += if_pppol2tp.h
+header-y += if_pppox.h
+header-y += if_pppolac.h
+header-y += if_pppopns.h
+header-y += if_slip.h
+header-y += if_strip.h
+header-y += if_team.h
+header-y += if_tr.h
+header-y += if_tun.h
+header-y += if_tunnel.h
+header-y += if_vlan.h
+header-y += if_x25.h
+header-y += igmp.h
+header-y += in.h
+header-y += in6.h
+header-y += in_route.h
+header-y += sock_diag.h
+header-y += inet_diag.h
+header-y += unix_diag.h
+header-y += inotify.h
+header-y += input.h
+header-y += ioctl.h
+header-y += ip.h
+header-y += ip6_tunnel.h
+header-y += ip_vs.h
+header-y += ipc.h
+header-y += ipmi.h
+header-y += ipmi_msgdefs.h
+header-y += ipsec.h
+header-y += ipv6.h
+header-y += ipv6_route.h
+header-y += ipx.h
+header-y += irda.h
+header-y += irqnr.h
+header-y += isdn.h
+header-y += isdn_divertif.h
+header-y += isdn_ppp.h
+header-y += isdnif.h
+header-y += iso_fs.h
+header-y += ivtv.h
+header-y += ivtvfb.h
+header-y += ixjuser.h
+header-y += jffs2.h
+header-y += joystick.h
+header-y += kd.h
+header-y += kdev_t.h
+header-y += kernel.h
+header-y += kernelcapi.h
+header-y += kernel-page-flags.h
+header-y += keyboard.h
+header-y += keyctl.h
+header-y += l2tp.h
+header-y += limits.h
+header-y += llc.h
+header-y += loop.h
+header-y += lp.h
+header-y += magic.h
+header-y += major.h
+header-y += map_to_7segment.h
+header-y += matroxfb.h
+header-y += mdio.h
+header-y += media.h
+header-y += mempolicy.h
+header-y += meye.h
+header-y += mii.h
+header-y += minix_fs.h
+header-y += mman.h
+header-y += mmtimer.h
+header-y += mqueue.h
+header-y += mroute.h
+header-y += mroute6.h
+header-y += msdos_fs.h
+header-y += msg.h
+header-y += mtio.h
+header-y += n_r3964.h
+header-y += nbd.h
+header-y += ncp.h
+header-y += ncp_fs.h
+header-y += ncp_mount.h
+header-y += ncp_no.h
+header-y += neighbour.h
+header-y += net.h
+header-y += net_dropmon.h
+header-y += net_tstamp.h
+header-y += netdevice.h
+header-y += netfilter.h
+header-y += netfilter_arp.h
+header-y += netfilter_bridge.h
+header-y += netfilter_decnet.h
+header-y += netfilter_ipv4.h
+header-y += netfilter_ipv6.h
+header-y += netlink.h
+header-y += netrom.h
+header-y += nfs.h
+header-y += nfs2.h
+header-y += nfs3.h
+header-y += nfs4.h
+header-y += nfs4_mount.h
+header-y += nfs_fs.h
+header-y += nfs_idmap.h
+header-y += nfs_mount.h
+header-y += nfsacl.h
+header-y += nl80211.h
+header-y += nubus.h
+header-y += nvram.h
+header-y += omap3isp.h
+header-y += omapfb.h
+header-y += oom.h
+header-y += param.h
+header-y += parport.h
+header-y += patchkey.h
+header-y += pci.h
+header-y += pci_regs.h
+header-y += perf_event.h
+header-y += personality.h
+header-y += pfkeyv2.h
+header-y += pg.h
+header-y += phantom.h
+header-y += phonet.h
+header-y += pkt_cls.h
+header-y += pkt_sched.h
+header-y += pktcdvd.h
+header-y += pmu.h
+header-y += poll.h
+header-y += posix_types.h
+header-y += ppdev.h
+header-y += ppp-comp.h
+header-y += ppp-ioctl.h
+header-y += ppp_defs.h
+header-y += pps.h
+header-y += prctl.h
+header-y += ptp_clock.h
+header-y += ptrace.h
+header-y += qnx4_fs.h
+header-y += qnxtypes.h
+header-y += quota.h
+header-y += radeonfb.h
+header-y += random.h
+header-y += raw.h
+header-y += rds.h
+header-y += reboot.h
+header-y += reiserfs_fs.h
+header-y += reiserfs_xattr.h
+header-y += resource.h
+header-y += rfkill.h
+header-y += romfs_fs.h
+header-y += rose.h
+header-y += route.h
+header-y += rtc.h
+header-y += rtnetlink.h
+header-y += scc.h
+header-y += sched.h
+header-y += screen_info.h
+header-y += sdla.h
+header-y += securebits.h
+header-y += selinux_netlink.h
+header-y += sem.h
+header-y += serial.h
+header-y += serial_core.h
+header-y += serial_reg.h
+header-y += serio.h
+header-y += shm.h
+header-y += signal.h
+header-y += signalfd.h
+header-y += snmp.h
+header-y += socket.h
+header-y += sockios.h
+header-y += som.h
+header-y += sonet.h
+header-y += sonypi.h
+header-y += sound.h
+header-y += soundcard.h
+header-y += stat.h
+header-y += stddef.h
+header-y += string.h
+header-y += suspend_ioctls.h
+header-y += swab.h
+header-y += synclink.h
+header-y += sysctl.h
+header-y += sysinfo.h
+header-y += taskstats.h
+header-y += tcp.h
+header-y += telephony.h
+header-y += termios.h
+header-y += time.h
+header-y += times.h
+header-y += timex.h
+header-y += tiocl.h
+header-y += tipc.h
+header-y += tipc_config.h
+header-y += toshiba.h
+header-y += tty.h
+header-y += types.h
+header-y += udf_fs_i.h
+header-y += udp.h
+header-y += uhid.h
+header-y += uinput.h
+header-y += uio.h
+header-y += ultrasound.h
+header-y += un.h
+header-y += unistd.h
+header-y += usbdevice_fs.h
+header-y += utime.h
+header-y += utsname.h
+header-y += uvcvideo.h
+header-y += v4l2-mediabus.h
+header-y += v4l2-subdev.h
+header-y += veth.h
+header-y += vhost.h
+header-y += videodev2.h
+header-y += virtio_9p.h
+header-y += virtio_balloon.h
+header-y += virtio_blk.h
+header-y += virtio_config.h
+header-y += virtio_console.h
+header-y += virtio_ids.h
+header-y += virtio_net.h
+header-y += virtio_pci.h
+header-y += virtio_ring.h
+header-y += virtio_rng.h
+header-y += vt.h
+header-y += wait.h
+header-y += wanrouter.h
+header-y += watchdog.h
+header-y += wimax.h
+header-y += wireless.h
+header-y += x25.h
+header-y += xattr.h
+header-y += xfrm.h
diff --git a/include/linux/a.out.h b/include/linux/a.out.h
new file mode 100644
index 00000000..e86dfca4
--- /dev/null
+++ b/include/linux/a.out.h
@@ -0,0 +1,278 @@
+#ifndef __A_OUT_GNU_H__
+#define __A_OUT_GNU_H__
+
+#define __GNU_EXEC_MACROS__
+
+#ifndef __STRUCT_EXEC_OVERRIDE__
+
+#include <asm/a.out.h>
+
+#endif /* __STRUCT_EXEC_OVERRIDE__ */
+
+#ifndef __ASSEMBLY__
+
+/* these go in the N_MACHTYPE field */
+enum machine_type {
+#if defined (M_OLDSUN2)
+  M__OLDSUN2 = M_OLDSUN2,
+#else
+  M_OLDSUN2 = 0,
+#endif
+#if defined (M_68010)
+  M__68010 = M_68010,
+#else
+  M_68010 = 1,
+#endif
+#if defined (M_68020)
+  M__68020 = M_68020,
+#else
+  M_68020 = 2,
+#endif
+#if defined (M_SPARC)
+  M__SPARC = M_SPARC,
+#else
+  M_SPARC = 3,
+#endif
+  /* skip a bunch so we don't run into any of sun's numbers */
+  M_386 = 100,
+  M_MIPS1 = 151,	/* MIPS R3000/R3000 binary */
+  M_MIPS2 = 152		/* MIPS R6000/R4000 binary */
+};
+
+#if !defined (N_MAGIC)
+#define N_MAGIC(exec) ((exec).a_info & 0xffff)
+#endif
+#define N_MACHTYPE(exec) ((enum machine_type)(((exec).a_info >> 16) & 0xff))
+#define N_FLAGS(exec) (((exec).a_info >> 24) & 0xff)
+#define N_SET_INFO(exec, magic, type, flags) \
+	((exec).a_info = ((magic) & 0xffff) \
+	 | (((int)(type) & 0xff) << 16) \
+	 | (((flags) & 0xff) << 24))
+#define N_SET_MAGIC(exec, magic) \
+	((exec).a_info = (((exec).a_info & 0xffff0000) | ((magic) & 0xffff)))
+
+#define N_SET_MACHTYPE(exec, machtype) \
+	((exec).a_info = \
+	 ((exec).a_info&0xff00ffff) | ((((int)(machtype))&0xff) << 16))
+
+#define N_SET_FLAGS(exec, flags) \
+	((exec).a_info = \
+	 ((exec).a_info&0x00ffffff) | (((flags) & 0xff) << 24))
+
+/* Code indicating object file or impure executable.  */
+#define OMAGIC 0407
+/* Code indicating pure executable.  */
+#define NMAGIC 0410
+/* Code indicating demand-paged executable.  */
+#define ZMAGIC 0413
+/* This indicates a demand-paged executable with the header in the text. 
+   The first page is unmapped to help trap NULL pointer references */
+#define QMAGIC 0314
+
+/* Code indicating core file.  */
+#define CMAGIC 0421
+
+#if !defined (N_BADMAG)
+#define N_BADMAG(x)	  (N_MAGIC(x) != OMAGIC		\
+			&& N_MAGIC(x) != NMAGIC		\
+  			&& N_MAGIC(x) != ZMAGIC \
+		        && N_MAGIC(x) != QMAGIC)
+#endif
+
+#define _N_HDROFF(x) (1024 - sizeof (struct exec))
+
+#if !defined (N_TXTOFF)
+#define N_TXTOFF(x) \
+ (N_MAGIC(x) == ZMAGIC ? _N_HDROFF((x)) + sizeof (struct exec) : \
+  (N_MAGIC(x) == QMAGIC ? 0 : sizeof (struct exec)))
+#endif
+
+#if !defined (N_DATOFF)
+#define N_DATOFF(x) (N_TXTOFF(x) + (x).a_text)
+#endif
+
+#if !defined (N_TRELOFF)
+#define N_TRELOFF(x) (N_DATOFF(x) + (x).a_data)
+#endif
+
+#if !defined (N_DRELOFF)
+#define N_DRELOFF(x) (N_TRELOFF(x) + N_TRSIZE(x))
+#endif
+
+#if !defined (N_SYMOFF)
+#define N_SYMOFF(x) (N_DRELOFF(x) + N_DRSIZE(x))
+#endif
+
+#if !defined (N_STROFF)
+#define N_STROFF(x) (N_SYMOFF(x) + N_SYMSIZE(x))
+#endif
+
+/* Address of text segment in memory after it is loaded.  */
+#if !defined (N_TXTADDR)
+#define N_TXTADDR(x) (N_MAGIC(x) == QMAGIC ? PAGE_SIZE : 0)
+#endif
+
+/* Address of data segment in memory after it is loaded.
+   Note that it is up to you to define SEGMENT_SIZE
+   on machines not listed here.  */
+#if defined(vax) || defined(hp300) || defined(pyr)
+#define SEGMENT_SIZE page_size
+#endif
+#ifdef	sony
+#define	SEGMENT_SIZE	0x2000
+#endif	/* Sony.  */
+#ifdef is68k
+#define SEGMENT_SIZE 0x20000
+#endif
+#if defined(m68k) && defined(PORTAR)
+#define PAGE_SIZE 0x400
+#define SEGMENT_SIZE PAGE_SIZE
+#endif
+
+#ifdef linux
+#ifdef __KERNEL__
+#include <asm/page.h>
+#else
+#include <unistd.h>
+#endif
+#if defined(__i386__) || defined(__mc68000__)
+#define SEGMENT_SIZE	1024
+#else
+#ifndef SEGMENT_SIZE
+#ifdef __KERNEL__
+#define SEGMENT_SIZE	PAGE_SIZE
+#else
+#define SEGMENT_SIZE   getpagesize()
+#endif
+#endif
+#endif
+#endif
+
+#define _N_SEGMENT_ROUND(x) ALIGN(x, SEGMENT_SIZE)
+
+#define _N_TXTENDADDR(x) (N_TXTADDR(x)+(x).a_text)
+
+#ifndef N_DATADDR
+#define N_DATADDR(x) \
+    (N_MAGIC(x)==OMAGIC? (_N_TXTENDADDR(x)) \
+     : (_N_SEGMENT_ROUND (_N_TXTENDADDR(x))))
+#endif
+
+/* Address of bss segment in memory after it is loaded.  */
+#if !defined (N_BSSADDR)
+#define N_BSSADDR(x) (N_DATADDR(x) + (x).a_data)
+#endif
+
+#if !defined (N_NLIST_DECLARED)
+struct nlist {
+  union {
+    char *n_name;
+    struct nlist *n_next;
+    long n_strx;
+  } n_un;
+  unsigned char n_type;
+  char n_other;
+  short n_desc;
+  unsigned long n_value;
+};
+#endif /* no N_NLIST_DECLARED.  */
+
+#if !defined (N_UNDF)
+#define N_UNDF 0
+#endif
+#if !defined (N_ABS)
+#define N_ABS 2
+#endif
+#if !defined (N_TEXT)
+#define N_TEXT 4
+#endif
+#if !defined (N_DATA)
+#define N_DATA 6
+#endif
+#if !defined (N_BSS)
+#define N_BSS 8
+#endif
+#if !defined (N_FN)
+#define N_FN 15
+#endif
+
+#if !defined (N_EXT)
+#define N_EXT 1
+#endif
+#if !defined (N_TYPE)
+#define N_TYPE 036
+#endif
+#if !defined (N_STAB)
+#define N_STAB 0340
+#endif
+
+/* The following type indicates the definition of a symbol as being
+   an indirect reference to another symbol.  The other symbol
+   appears as an undefined reference, immediately following this symbol.
+
+   Indirection is asymmetrical.  The other symbol's value will be used
+   to satisfy requests for the indirect symbol, but not vice versa.
+   If the other symbol does not have a definition, libraries will
+   be searched to find a definition.  */
+#define N_INDR 0xa
+
+/* The following symbols refer to set elements.
+   All the N_SET[ATDB] symbols with the same name form one set.
+   Space is allocated for the set in the text section, and each set
+   element's value is stored into one word of the space.
+   The first word of the space is the length of the set (number of elements).
+
+   The address of the set is made into an N_SETV symbol
+   whose name is the same as the name of the set.
+   This symbol acts like a N_DATA global symbol
+   in that it can satisfy undefined external references.  */
+
+/* These appear as input to LD, in a .o file.  */
+#define	N_SETA	0x14		/* Absolute set element symbol */
+#define	N_SETT	0x16		/* Text set element symbol */
+#define	N_SETD	0x18		/* Data set element symbol */
+#define	N_SETB	0x1A		/* Bss set element symbol */
+
+/* This is output from LD.  */
+#define N_SETV	0x1C		/* Pointer to set vector in data area.  */
+
+#if !defined (N_RELOCATION_INFO_DECLARED)
+/* This structure describes a single relocation to be performed.
+   The text-relocation section of the file is a vector of these structures,
+   all of which apply to the text section.
+   Likewise, the data-relocation section applies to the data section.  */
+
+struct relocation_info
+{
+  /* Address (within segment) to be relocated.  */
+  int r_address;
+  /* The meaning of r_symbolnum depends on r_extern.  */
+  unsigned int r_symbolnum:24;
+  /* Nonzero means value is a pc-relative offset
+     and it should be relocated for changes in its own address
+     as well as for changes in the symbol or section specified.  */
+  unsigned int r_pcrel:1;
+  /* Length (as exponent of 2) of the field to be relocated.
+     Thus, a value of 2 indicates 1<<2 bytes.  */
+  unsigned int r_length:2;
+  /* 1 => relocate with value of symbol.
+          r_symbolnum is the index of the symbol
+	  in file's the symbol table.
+     0 => relocate with the address of a segment.
+          r_symbolnum is N_TEXT, N_DATA, N_BSS or N_ABS
+	  (the N_EXT bit may be set also, but signifies nothing).  */
+  unsigned int r_extern:1;
+  /* Four bits that aren't used, but when writing an object file
+     it is desirable to clear them.  */
+#ifdef NS32K
+  unsigned r_bsr:1;
+  unsigned r_disp:1;
+  unsigned r_pad:2;
+#else
+  unsigned int r_pad:4;
+#endif
+};
+#endif /* no N_RELOCATION_INFO_DECLARED.  */
+
+#endif /*__ASSEMBLY__ */
+#endif /* __A_OUT_GNU_H__ */
diff --git a/include/linux/ac97_codec.h b/include/linux/ac97_codec.h
new file mode 100644
index 00000000..0260c3e7
--- /dev/null
+++ b/include/linux/ac97_codec.h
@@ -0,0 +1,362 @@
+#ifndef _AC97_CODEC_H_
+#define _AC97_CODEC_H_
+
+#include <linux/types.h>
+#include <linux/soundcard.h>
+
+/* AC97 1.0 */
+#define  AC97_RESET               0x0000      //
+#define  AC97_MASTER_VOL_STEREO   0x0002      // Line Out
+#define  AC97_HEADPHONE_VOL       0x0004      // 
+#define  AC97_MASTER_VOL_MONO     0x0006      // TAD Output
+#define  AC97_MASTER_TONE         0x0008      //
+#define  AC97_PCBEEP_VOL          0x000a      // none
+#define  AC97_PHONE_VOL           0x000c      // TAD Input (mono)
+#define  AC97_MIC_VOL             0x000e      // MIC Input (mono)
+#define  AC97_LINEIN_VOL          0x0010      // Line Input (stereo)
+#define  AC97_CD_VOL              0x0012      // CD Input (stereo)
+#define  AC97_VIDEO_VOL           0x0014      // none
+#define  AC97_AUX_VOL             0x0016      // Aux Input (stereo)
+#define  AC97_PCMOUT_VOL          0x0018      // Wave Output (stereo)
+#define  AC97_RECORD_SELECT       0x001a      //
+#define  AC97_RECORD_GAIN         0x001c
+#define  AC97_RECORD_GAIN_MIC     0x001e
+#define  AC97_GENERAL_PURPOSE     0x0020
+#define  AC97_3D_CONTROL          0x0022
+#define  AC97_MODEM_RATE          0x0024
+#define  AC97_POWER_CONTROL       0x0026
+
+/* AC'97 2.0 */
+#define AC97_EXTENDED_ID          0x0028       /* Extended Audio ID */
+#define AC97_EXTENDED_STATUS      0x002A       /* Extended Audio Status */
+#define AC97_PCM_FRONT_DAC_RATE   0x002C       /* PCM Front DAC Rate */
+#define AC97_PCM_SURR_DAC_RATE    0x002E       /* PCM Surround DAC Rate */
+#define AC97_PCM_LFE_DAC_RATE     0x0030       /* PCM LFE DAC Rate */
+#define AC97_PCM_LR_ADC_RATE      0x0032       /* PCM LR ADC Rate */
+#define AC97_PCM_MIC_ADC_RATE     0x0034       /* PCM MIC ADC Rate */
+#define AC97_CENTER_LFE_MASTER    0x0036       /* Center + LFE Master Volume */
+#define AC97_SURROUND_MASTER      0x0038       /* Surround (Rear) Master Volume */
+#define AC97_RESERVED_3A          0x003A       /* Reserved in AC '97 < 2.2 */
+
+/* AC'97 2.2 */
+#define AC97_SPDIF_CONTROL        0x003A       /* S/PDIF Control */
+
+/* range 0x3c-0x58 - MODEM */
+#define AC97_EXTENDED_MODEM_ID    0x003C
+#define AC97_EXTEND_MODEM_STAT    0x003E
+#define AC97_LINE1_RATE           0x0040
+#define AC97_LINE2_RATE           0x0042
+#define AC97_HANDSET_RATE         0x0044
+#define AC97_LINE1_LEVEL          0x0046
+#define AC97_LINE2_LEVEL          0x0048
+#define AC97_HANDSET_LEVEL        0x004A
+#define AC97_GPIO_CONFIG          0x004C
+#define AC97_GPIO_POLARITY        0x004E
+#define AC97_GPIO_STICKY          0x0050
+#define AC97_GPIO_WAKE_UP         0x0052
+#define AC97_GPIO_STATUS          0x0054
+#define AC97_MISC_MODEM_STAT      0x0056
+#define AC97_RESERVED_58          0x0058
+
+/* registers 0x005a - 0x007a are vendor reserved */
+
+#define AC97_VENDOR_ID1           0x007c
+#define AC97_VENDOR_ID2           0x007e
+
+/* volume control bit defines */
+#define AC97_MUTE                 0x8000
+#define AC97_MICBOOST             0x0040
+#define AC97_LEFTVOL              0x3f00
+#define AC97_RIGHTVOL             0x003f
+
+/* record mux defines */
+#define AC97_RECMUX_MIC           0x0000
+#define AC97_RECMUX_CD            0x0101
+#define AC97_RECMUX_VIDEO         0x0202
+#define AC97_RECMUX_AUX           0x0303
+#define AC97_RECMUX_LINE          0x0404
+#define AC97_RECMUX_STEREO_MIX    0x0505
+#define AC97_RECMUX_MONO_MIX      0x0606
+#define AC97_RECMUX_PHONE         0x0707
+
+/* general purpose register bit defines */
+#define AC97_GP_LPBK              0x0080       /* Loopback mode */
+#define AC97_GP_MS                0x0100       /* Mic Select 0=Mic1, 1=Mic2 */
+#define AC97_GP_MIX               0x0200       /* Mono output select 0=Mix, 1=Mic */
+#define AC97_GP_RLBK              0x0400       /* Remote Loopback - Modem line codec */
+#define AC97_GP_LLBK              0x0800       /* Local Loopback - Modem Line codec */
+#define AC97_GP_LD                0x1000       /* Loudness 1=on */
+#define AC97_GP_3D                0x2000       /* 3D Enhancement 1=on */
+#define AC97_GP_ST                0x4000       /* Stereo Enhancement 1=on */
+#define AC97_GP_POP               0x8000       /* Pcm Out Path, 0=pre 3D, 1=post 3D */
+
+/* extended audio status and control bit defines */
+#define AC97_EA_VRA               0x0001       /* Variable bit rate enable bit */
+#define AC97_EA_DRA               0x0002       /* Double-rate audio enable bit */
+#define AC97_EA_SPDIF             0x0004       /* S/PDIF Enable bit */
+#define AC97_EA_VRM               0x0008       /* Variable bit rate for MIC enable bit */
+#define AC97_EA_CDAC              0x0040       /* PCM Center DAC is ready (Read only) */
+#define AC97_EA_SDAC              0x0040       /* PCM Surround DACs are ready (Read only) */
+#define AC97_EA_LDAC              0x0080       /* PCM LFE DAC is ready (Read only) */
+#define AC97_EA_MDAC              0x0100       /* MIC ADC is ready (Read only) */
+#define AC97_EA_SPCV              0x0400       /* S/PDIF configuration valid (Read only) */
+#define AC97_EA_PRI               0x0800       /* Turns the PCM Center DAC off */
+#define AC97_EA_PRJ               0x1000       /* Turns the PCM Surround DACs off */
+#define AC97_EA_PRK               0x2000       /* Turns the PCM LFE DAC off */
+#define AC97_EA_PRL               0x4000       /* Turns the MIC ADC off */
+#define AC97_EA_SLOT_MASK         0xffcf       /* Mask for slot assignment bits */
+#define AC97_EA_SPSA_3_4          0x0000       /* Slot assigned to 3 & 4 */
+#define AC97_EA_SPSA_7_8          0x0010       /* Slot assigned to 7 & 8 */
+#define AC97_EA_SPSA_6_9          0x0020       /* Slot assigned to 6 & 9 */
+#define AC97_EA_SPSA_10_11        0x0030       /* Slot assigned to 10 & 11 */
+
+/* S/PDIF control bit defines */
+#define AC97_SC_PRO               0x0001       /* Professional status */
+#define AC97_SC_NAUDIO            0x0002       /* Non audio stream */
+#define AC97_SC_COPY              0x0004       /* Copyright status */
+#define AC97_SC_PRE               0x0008       /* Preemphasis status */
+#define AC97_SC_CC_MASK           0x07f0       /* Category Code mask */
+#define AC97_SC_L                 0x0800       /* Generation Level status */
+#define AC97_SC_SPSR_MASK         0xcfff       /* S/PDIF Sample Rate bits */
+#define AC97_SC_SPSR_44K          0x0000       /* Use 44.1kHz Sample rate */
+#define AC97_SC_SPSR_48K          0x2000       /* Use 48kHz Sample rate */
+#define AC97_SC_SPSR_32K          0x3000       /* Use 32kHz Sample rate */
+#define AC97_SC_DRS               0x4000       /* Double Rate S/PDIF */
+#define AC97_SC_V                 0x8000       /* Validity status */
+
+/* powerdown control and status bit defines */
+
+/* status */
+#define AC97_PWR_MDM              0x0010       /* Modem section ready */
+#define AC97_PWR_REF              0x0008       /* Vref nominal */
+#define AC97_PWR_ANL              0x0004       /* Analog section ready */
+#define AC97_PWR_DAC              0x0002       /* DAC section ready */
+#define AC97_PWR_ADC              0x0001       /* ADC section ready */
+
+/* control */
+#define AC97_PWR_PR0              0x0100       /* ADC and Mux powerdown */
+#define AC97_PWR_PR1              0x0200       /* DAC powerdown */
+#define AC97_PWR_PR2              0x0400       /* Output mixer powerdown (Vref on) */
+#define AC97_PWR_PR3              0x0800       /* Output mixer powerdown (Vref off) */
+#define AC97_PWR_PR4              0x1000       /* AC-link powerdown */
+#define AC97_PWR_PR5              0x2000       /* Internal Clk disable */
+#define AC97_PWR_PR6              0x4000       /* HP amp powerdown */
+#define AC97_PWR_PR7              0x8000       /* Modem off - if supported */
+
+/* extended audio ID register bit defines */
+#define AC97_EXTID_VRA            0x0001
+#define AC97_EXTID_DRA            0x0002
+#define AC97_EXTID_SPDIF          0x0004
+#define AC97_EXTID_VRM            0x0008
+#define AC97_EXTID_DSA0           0x0010
+#define AC97_EXTID_DSA1           0x0020
+#define AC97_EXTID_CDAC           0x0040
+#define AC97_EXTID_SDAC           0x0080
+#define AC97_EXTID_LDAC           0x0100
+#define AC97_EXTID_AMAP           0x0200
+#define AC97_EXTID_REV0           0x0400
+#define AC97_EXTID_REV1           0x0800
+#define AC97_EXTID_ID0            0x4000
+#define AC97_EXTID_ID1            0x8000
+
+/* extended status register bit defines */
+#define AC97_EXTSTAT_VRA          0x0001
+#define AC97_EXTSTAT_DRA          0x0002
+#define AC97_EXTSTAT_SPDIF        0x0004
+#define AC97_EXTSTAT_VRM          0x0008
+#define AC97_EXTSTAT_SPSA0        0x0010
+#define AC97_EXTSTAT_SPSA1        0x0020
+#define AC97_EXTSTAT_CDAC         0x0040
+#define AC97_EXTSTAT_SDAC         0x0080
+#define AC97_EXTSTAT_LDAC         0x0100
+#define AC97_EXTSTAT_MADC         0x0200
+#define AC97_EXTSTAT_SPCV         0x0400
+#define AC97_EXTSTAT_PRI          0x0800
+#define AC97_EXTSTAT_PRJ          0x1000
+#define AC97_EXTSTAT_PRK          0x2000
+#define AC97_EXTSTAT_PRL          0x4000
+
+/* extended audio ID register bit defines */
+#define AC97_EXTID_VRA            0x0001
+#define AC97_EXTID_DRA            0x0002
+#define AC97_EXTID_SPDIF          0x0004
+#define AC97_EXTID_VRM            0x0008
+#define AC97_EXTID_DSA0           0x0010
+#define AC97_EXTID_DSA1           0x0020
+#define AC97_EXTID_CDAC           0x0040
+#define AC97_EXTID_SDAC           0x0080
+#define AC97_EXTID_LDAC           0x0100
+#define AC97_EXTID_AMAP           0x0200
+#define AC97_EXTID_REV0           0x0400
+#define AC97_EXTID_REV1           0x0800
+#define AC97_EXTID_ID0            0x4000
+#define AC97_EXTID_ID1            0x8000
+
+/* extended status register bit defines */
+#define AC97_EXTSTAT_VRA          0x0001
+#define AC97_EXTSTAT_DRA          0x0002
+#define AC97_EXTSTAT_SPDIF        0x0004
+#define AC97_EXTSTAT_VRM          0x0008
+#define AC97_EXTSTAT_SPSA0        0x0010
+#define AC97_EXTSTAT_SPSA1        0x0020
+#define AC97_EXTSTAT_CDAC         0x0040
+#define AC97_EXTSTAT_SDAC         0x0080
+#define AC97_EXTSTAT_LDAC         0x0100
+#define AC97_EXTSTAT_MADC         0x0200
+#define AC97_EXTSTAT_SPCV         0x0400
+#define AC97_EXTSTAT_PRI          0x0800
+#define AC97_EXTSTAT_PRJ          0x1000
+#define AC97_EXTSTAT_PRK          0x2000
+#define AC97_EXTSTAT_PRL          0x4000
+
+/* useful power states */
+#define AC97_PWR_D0               0x0000      /* everything on */
+#define AC97_PWR_D1              AC97_PWR_PR0|AC97_PWR_PR1|AC97_PWR_PR4
+#define AC97_PWR_D2              AC97_PWR_PR0|AC97_PWR_PR1|AC97_PWR_PR2|AC97_PWR_PR3|AC97_PWR_PR4
+#define AC97_PWR_D3              AC97_PWR_PR0|AC97_PWR_PR1|AC97_PWR_PR2|AC97_PWR_PR3|AC97_PWR_PR4
+#define AC97_PWR_ANLOFF          AC97_PWR_PR2|AC97_PWR_PR3  /* analog section off */
+
+/* Total number of defined registers.  */
+#define AC97_REG_CNT 64
+
+
+/* OSS interface to the ac97s.. */
+#define AC97_STEREO_MASK (SOUND_MASK_VOLUME|SOUND_MASK_PCM|\
+	SOUND_MASK_LINE|SOUND_MASK_CD|\
+	SOUND_MASK_ALTPCM|SOUND_MASK_IGAIN|\
+	SOUND_MASK_LINE1|SOUND_MASK_VIDEO)
+
+#define AC97_SUPPORTED_MASK (AC97_STEREO_MASK | \
+	SOUND_MASK_BASS|SOUND_MASK_TREBLE|\
+	SOUND_MASK_SPEAKER|SOUND_MASK_MIC|\
+	SOUND_MASK_PHONEIN|SOUND_MASK_PHONEOUT)
+
+#define AC97_RECORD_MASK (SOUND_MASK_MIC|\
+	SOUND_MASK_CD|SOUND_MASK_IGAIN|SOUND_MASK_VIDEO|\
+	SOUND_MASK_LINE1| SOUND_MASK_LINE|\
+	SOUND_MASK_PHONEIN)
+
+/* original check is not good enough in case FOO is greater than
+ * SOUND_MIXER_NRDEVICES because the supported_mixers has exactly
+ * SOUND_MIXER_NRDEVICES elements.
+ * before matching the given mixer against the bitmask in supported_mixers we
+ * check if mixer number exceeds maximum allowed size which is as mentioned
+ * above SOUND_MIXER_NRDEVICES */
+#define supported_mixer(CODEC,FOO) ((FOO >= 0) && \
+                                    (FOO < SOUND_MIXER_NRDEVICES) && \
+                                    (CODEC)->supported_mixers & (1<<FOO) )
+
+struct ac97_codec {
+	/* Linked list of codecs */
+	struct list_head list;
+
+	/* AC97 controller connected with */
+	void *private_data;
+
+	char *name;
+	int id;
+	int dev_mixer; 
+	int type;
+	u32 model;
+
+	unsigned int modem:1;
+
+	struct ac97_ops *codec_ops;
+
+	/* controller specific lower leverl ac97 accessing routines.
+	   must be re-entrant safe */
+	u16  (*codec_read)  (struct ac97_codec *codec, u8 reg);
+	void (*codec_write) (struct ac97_codec *codec, u8 reg, u16 val);
+
+	/* Wait for codec-ready.  Ok to sleep here.  */
+	void  (*codec_wait)  (struct ac97_codec *codec);
+
+	/* callback used by helper drivers for interesting ac97 setups */
+	void  (*codec_unregister) (struct ac97_codec *codec);
+	
+	struct ac97_driver *driver;
+	void *driver_private;	/* Private data for the driver */
+	
+	spinlock_t lock;
+	
+	/* OSS mixer masks */
+	int modcnt;
+	int supported_mixers;
+	int stereo_mixers;
+	int record_sources;
+
+	/* Property flags */
+	int flags;
+
+	int bit_resolution;
+
+	/* OSS mixer interface */
+	int  (*read_mixer) (struct ac97_codec *codec, int oss_channel);
+	void (*write_mixer)(struct ac97_codec *codec, int oss_channel,
+			    unsigned int left, unsigned int right);
+	int  (*recmask_io) (struct ac97_codec *codec, int rw, int mask);
+	int  (*mixer_ioctl)(struct ac97_codec *codec, unsigned int cmd, unsigned long arg);
+
+	/* saved OSS mixer states */
+	unsigned int mixer_state[SOUND_MIXER_NRDEVICES];
+
+	/* Software Modem interface */
+	int  (*modem_ioctl)(struct ac97_codec *codec, unsigned int cmd, unsigned long arg);
+};
+
+/*
+ *	Operation structures for each known AC97 chip
+ */
+ 
+struct ac97_ops
+{
+	/* Initialise */
+	int (*init)(struct ac97_codec *c);
+	/* Amplifier control */
+	int (*amplifier)(struct ac97_codec *codec, int on);
+	/* Digital mode control */
+	int (*digital)(struct ac97_codec *codec, int slots, int rate, int mode);
+#define AUDIO_DIGITAL		0x8000
+#define AUDIO_PRO		0x4000
+#define AUDIO_DRS		0x2000
+#define AUDIO_CCMASK		0x003F
+	
+#define AC97_DELUDED_MODEM	1	/* Audio codec reports its a modem */
+#define AC97_NO_PCM_VOLUME	2	/* Volume control is missing 	   */
+#define AC97_DEFAULT_POWER_OFF 4 /* Needs warm reset to power up */
+};
+
+extern int ac97_probe_codec(struct ac97_codec *);
+
+extern struct ac97_codec *ac97_alloc_codec(void);
+extern void ac97_release_codec(struct ac97_codec *codec);
+
+struct ac97_driver {
+	struct list_head list;
+	char *name;
+	u32 codec_id;
+	u32 codec_mask;
+	int (*probe) (struct ac97_codec *codec, struct ac97_driver *driver);
+	void (*remove) (struct ac97_codec *codec, struct ac97_driver *driver);
+};
+
+/* quirk types */
+enum {
+	AC97_TUNE_DEFAULT = -1, /* use default from quirk list (not valid in list) */
+	AC97_TUNE_NONE = 0,     /* nothing extra to do */
+	AC97_TUNE_HP_ONLY,      /* headphone (true line-out) control as master only */
+	AC97_TUNE_SWAP_HP,      /* swap headphone and master controls */
+	AC97_TUNE_SWAP_SURROUND, /* swap master and surround controls */
+	AC97_TUNE_AD_SHARING,   /* for AD1985, turn on OMS bit and use headphone */
+	AC97_TUNE_ALC_JACK,     /* for Realtek, enable JACK detection */
+};
+
+struct ac97_quirk {
+	unsigned short vendor;  /* PCI vendor id */
+	unsigned short device;  /* PCI device id */
+	unsigned short mask;    /* device id bit mask, 0 = accept all */
+	const char *name;       /* name shown as info */
+	int type;               /* quirk type above */
+};
+
+#endif /* _AC97_CODEC_H_ */
diff --git a/include/linux/acct.h b/include/linux/acct.h
new file mode 100644
index 00000000..d537aa0e
--- /dev/null
+++ b/include/linux/acct.h
@@ -0,0 +1,215 @@
+/*
+ *  BSD Process Accounting for Linux - Definitions
+ *
+ *  Author: Marco van Wieringen (mvw@planets.elm.net)
+ *
+ *  This header file contains the definitions needed to implement
+ *  BSD-style process accounting. The kernel accounting code and all
+ *  user-level programs that try to do something useful with the
+ *  process accounting log must include this file.
+ *
+ *  Copyright (C) 1995 - 1997 Marco van Wieringen - ELM Consultancy B.V.
+ *
+ */
+
+#ifndef _LINUX_ACCT_H
+#define _LINUX_ACCT_H
+
+#include <linux/types.h>
+
+#include <asm/param.h>
+#include <asm/byteorder.h>
+
+/* 
+ *  comp_t is a 16-bit "floating" point number with a 3-bit base 8
+ *  exponent and a 13-bit fraction.
+ *  comp2_t is 24-bit with 5-bit base 2 exponent and 20 bit fraction
+ *  (leading 1 not stored).
+ *  See linux/kernel/acct.c for the specific encoding systems used.
+ */
+
+typedef __u16	comp_t;
+typedef __u32	comp2_t;
+
+/*
+ *   accounting file record
+ *
+ *   This structure contains all of the information written out to the
+ *   process accounting file whenever a process exits.
+ */
+
+#define ACCT_COMM	16
+
+struct acct
+{
+	char		ac_flag;		/* Flags */
+	char		ac_version;		/* Always set to ACCT_VERSION */
+	/* for binary compatibility back until 2.0 */
+	__u16		ac_uid16;		/* LSB of Real User ID */
+	__u16		ac_gid16;		/* LSB of Real Group ID */
+	__u16		ac_tty;			/* Control Terminal */
+	__u32		ac_btime;		/* Process Creation Time */
+	comp_t		ac_utime;		/* User Time */
+	comp_t		ac_stime;		/* System Time */
+	comp_t		ac_etime;		/* Elapsed Time */
+	comp_t		ac_mem;			/* Average Memory Usage */
+	comp_t		ac_io;			/* Chars Transferred */
+	comp_t		ac_rw;			/* Blocks Read or Written */
+	comp_t		ac_minflt;		/* Minor Pagefaults */
+	comp_t		ac_majflt;		/* Major Pagefaults */
+	comp_t		ac_swaps;		/* Number of Swaps */
+/* m68k had no padding here. */
+#if !defined(CONFIG_M68K) || !defined(__KERNEL__)
+	__u16		ac_ahz;			/* AHZ */
+#endif
+	__u32		ac_exitcode;		/* Exitcode */
+	char		ac_comm[ACCT_COMM + 1];	/* Command Name */
+	__u8		ac_etime_hi;		/* Elapsed Time MSB */
+	__u16		ac_etime_lo;		/* Elapsed Time LSB */
+	__u32		ac_uid;			/* Real User ID */
+	__u32		ac_gid;			/* Real Group ID */
+};
+
+struct acct_v3
+{
+	char		ac_flag;		/* Flags */
+	char		ac_version;		/* Always set to ACCT_VERSION */
+	__u16		ac_tty;			/* Control Terminal */
+	__u32		ac_exitcode;		/* Exitcode */
+	__u32		ac_uid;			/* Real User ID */
+	__u32		ac_gid;			/* Real Group ID */
+	__u32		ac_pid;			/* Process ID */
+	__u32		ac_ppid;		/* Parent Process ID */
+	__u32		ac_btime;		/* Process Creation Time */
+#ifdef __KERNEL__
+	__u32		ac_etime;		/* Elapsed Time */
+#else
+	float		ac_etime;		/* Elapsed Time */
+#endif
+	comp_t		ac_utime;		/* User Time */
+	comp_t		ac_stime;		/* System Time */
+	comp_t		ac_mem;			/* Average Memory Usage */
+	comp_t		ac_io;			/* Chars Transferred */
+	comp_t		ac_rw;			/* Blocks Read or Written */
+	comp_t		ac_minflt;		/* Minor Pagefaults */
+	comp_t		ac_majflt;		/* Major Pagefaults */
+	comp_t		ac_swaps;		/* Number of Swaps */
+	char		ac_comm[ACCT_COMM];	/* Command Name */
+};
+
+/*
+ *  accounting flags
+ */
+				/* bit set when the process ... */
+#define AFORK		0x01	/* ... executed fork, but did not exec */
+#define ASU		0x02	/* ... used super-user privileges */
+#define ACOMPAT		0x04	/* ... used compatibility mode (VAX only not used) */
+#define ACORE		0x08	/* ... dumped core */
+#define AXSIG		0x10	/* ... was killed by a signal */
+
+#ifdef __BIG_ENDIAN
+#define ACCT_BYTEORDER	0x80	/* accounting file is big endian */
+#else
+#define ACCT_BYTEORDER	0x00	/* accounting file is little endian */
+#endif
+
+#ifdef __KERNEL__
+
+
+#ifdef CONFIG_BSD_PROCESS_ACCT
+struct vfsmount;
+struct super_block;
+struct pacct_struct;
+struct pid_namespace;
+extern int acct_parm[]; /* for sysctl */
+extern void acct_auto_close_mnt(struct vfsmount *m);
+extern void acct_auto_close(struct super_block *sb);
+extern void acct_collect(long exitcode, int group_dead);
+extern void acct_process(void);
+extern void acct_exit_ns(struct pid_namespace *);
+#else
+#define acct_auto_close_mnt(x)	do { } while (0)
+#define acct_auto_close(x)	do { } while (0)
+#define acct_collect(x,y)	do { } while (0)
+#define acct_process()		do { } while (0)
+#define acct_exit_ns(ns)	do { } while (0)
+#endif
+
+/*
+ * ACCT_VERSION numbers as yet defined:
+ * 0: old format (until 2.6.7) with 16 bit uid/gid
+ * 1: extended variant (binary compatible on M68K)
+ * 2: extended variant (binary compatible on everything except M68K)
+ * 3: new binary incompatible format (64 bytes)
+ * 4: new binary incompatible format (128 bytes)
+ * 5: new binary incompatible format (128 bytes, second half)
+ *
+ */
+
+#undef ACCT_VERSION
+#undef AHZ
+
+#ifdef CONFIG_BSD_PROCESS_ACCT_V3
+#define ACCT_VERSION	3
+#define AHZ		100
+typedef struct acct_v3 acct_t;
+#else
+#ifdef CONFIG_M68K
+#define ACCT_VERSION	1
+#else
+#define ACCT_VERSION	2
+#endif
+#define AHZ		(USER_HZ)
+typedef struct acct acct_t;
+#endif
+
+#else
+#define ACCT_VERSION	2
+#define AHZ		(HZ)
+#endif	/* __KERNEL */
+
+#ifdef __KERNEL__
+#include <linux/jiffies.h>
+/*
+ * Yet another set of HZ to *HZ helper functions.
+ * See <linux/jiffies.h> for the original.
+ */
+
+static inline u32 jiffies_to_AHZ(unsigned long x)
+{
+#if (TICK_NSEC % (NSEC_PER_SEC / AHZ)) == 0
+# if HZ < AHZ
+	return x * (AHZ / HZ);
+# else
+	return x / (HZ / AHZ);
+# endif
+#else
+        u64 tmp = (u64)x * TICK_NSEC;
+        do_div(tmp, (NSEC_PER_SEC / AHZ));
+        return (long)tmp;
+#endif
+}
+
+static inline u64 nsec_to_AHZ(u64 x)
+{
+#if (NSEC_PER_SEC % AHZ) == 0
+	do_div(x, (NSEC_PER_SEC / AHZ));
+#elif (AHZ % 512) == 0
+	x *= AHZ/512;
+	do_div(x, (NSEC_PER_SEC / 512));
+#else
+	/*
+         * max relative error 5.7e-8 (1.8s per year) for AHZ <= 1024,
+         * overflow after 64.99 years.
+         * exact for AHZ=60, 72, 90, 120, 144, 180, 300, 600, 900, ...
+         */
+	x *= 9;
+	do_div(x, (unsigned long)((9ull * NSEC_PER_SEC + (AHZ/2))
+	                          / AHZ));
+#endif
+	return x;
+}
+
+#endif  /* __KERNEL */
+
+#endif	/* _LINUX_ACCT_H */
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
new file mode 100644
index 00000000..f421dd84
--- /dev/null
+++ b/include/linux/acpi.h
@@ -0,0 +1,385 @@
+/*
+ * acpi.h - ACPI Interface
+ *
+ * Copyright (C) 2001 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#ifndef _LINUX_ACPI_H
+#define _LINUX_ACPI_H
+
+#include <linux/ioport.h>	/* for struct resource */
+
+#ifdef	CONFIG_ACPI
+
+#ifndef _LINUX
+#define _LINUX
+#endif
+
+#include <linux/list.h>
+#include <linux/mod_devicetable.h>
+
+#include <acpi/acpi.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
+#include <acpi/acpi_numa.h>
+#include <asm/acpi.h>
+
+enum acpi_irq_model_id {
+	ACPI_IRQ_MODEL_PIC = 0,
+	ACPI_IRQ_MODEL_IOAPIC,
+	ACPI_IRQ_MODEL_IOSAPIC,
+	ACPI_IRQ_MODEL_PLATFORM,
+	ACPI_IRQ_MODEL_COUNT
+};
+
+extern enum acpi_irq_model_id	acpi_irq_model;
+
+enum acpi_interrupt_id {
+	ACPI_INTERRUPT_PMI	= 1,
+	ACPI_INTERRUPT_INIT,
+	ACPI_INTERRUPT_CPEI,
+	ACPI_INTERRUPT_COUNT
+};
+
+#define	ACPI_SPACE_MEM		0
+
+enum acpi_address_range_id {
+	ACPI_ADDRESS_RANGE_MEMORY = 1,
+	ACPI_ADDRESS_RANGE_RESERVED = 2,
+	ACPI_ADDRESS_RANGE_ACPI = 3,
+	ACPI_ADDRESS_RANGE_NVS	= 4,
+	ACPI_ADDRESS_RANGE_COUNT
+};
+
+
+/* Table Handlers */
+
+typedef int (*acpi_table_handler) (struct acpi_table_header *table);
+
+typedef int (*acpi_table_entry_handler) (struct acpi_subtable_header *header, const unsigned long end);
+
+char * __acpi_map_table (unsigned long phys_addr, unsigned long size);
+void __acpi_unmap_table(char *map, unsigned long size);
+int early_acpi_boot_init(void);
+int acpi_boot_init (void);
+void acpi_boot_table_init (void);
+int acpi_mps_check (void);
+int acpi_numa_init (void);
+
+int acpi_table_init (void);
+int acpi_table_parse (char *id, acpi_table_handler handler);
+int __init acpi_table_parse_entries(char *id, unsigned long table_size,
+	int entry_id, acpi_table_entry_handler handler, unsigned int max_entries);
+int acpi_table_parse_madt (enum acpi_madt_type id, acpi_table_entry_handler handler, unsigned int max_entries);
+int acpi_parse_mcfg (struct acpi_table_header *header);
+void acpi_table_print_madt_entry (struct acpi_subtable_header *madt);
+
+/* the following four functions are architecture-dependent */
+void acpi_numa_slit_init (struct acpi_table_slit *slit);
+void acpi_numa_processor_affinity_init (struct acpi_srat_cpu_affinity *pa);
+void acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa);
+void acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma);
+void acpi_numa_arch_fixup(void);
+
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+/* Arch dependent functions for cpu hotplug support */
+int acpi_map_lsapic(acpi_handle handle, int *pcpu);
+int acpi_unmap_lsapic(int cpu);
+#endif /* CONFIG_ACPI_HOTPLUG_CPU */
+
+int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base);
+int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base);
+void acpi_irq_stats_init(void);
+extern u32 acpi_irq_handled;
+extern u32 acpi_irq_not_handled;
+
+extern int sbf_port;
+extern unsigned long acpi_realmode_flags;
+
+int acpi_register_gsi (struct device *dev, u32 gsi, int triggering, int polarity);
+int acpi_gsi_to_irq (u32 gsi, unsigned int *irq);
+int acpi_isa_irq_to_gsi (unsigned isa_irq, u32 *gsi);
+
+#ifdef CONFIG_X86_IO_APIC
+extern int acpi_get_override_irq(u32 gsi, int *trigger, int *polarity);
+#else
+#define acpi_get_override_irq(gsi, trigger, polarity) (-1)
+#endif
+/*
+ * This function undoes the effect of one call to acpi_register_gsi().
+ * If this matches the last registration, any IRQ resources for gsi
+ * are freed.
+ */
+void acpi_unregister_gsi (u32 gsi);
+
+struct pci_dev;
+
+int acpi_pci_irq_enable (struct pci_dev *dev);
+void acpi_penalize_isa_irq(int irq, int active);
+
+void acpi_pci_irq_disable (struct pci_dev *dev);
+
+struct acpi_pci_driver {
+	struct acpi_pci_driver *next;
+	int (*add)(acpi_handle handle);
+	void (*remove)(acpi_handle handle);
+};
+
+int acpi_pci_register_driver(struct acpi_pci_driver *driver);
+void acpi_pci_unregister_driver(struct acpi_pci_driver *driver);
+
+extern int ec_read(u8 addr, u8 *val);
+extern int ec_write(u8 addr, u8 val);
+extern int ec_transaction(u8 command,
+                          const u8 *wdata, unsigned wdata_len,
+                          u8 *rdata, unsigned rdata_len);
+extern acpi_handle ec_get_handle(void);
+
+#if defined(CONFIG_ACPI_WMI) || defined(CONFIG_ACPI_WMI_MODULE)
+
+typedef void (*wmi_notify_handler) (u32 value, void *context);
+
+extern acpi_status wmi_evaluate_method(const char *guid, u8 instance,
+					u32 method_id,
+					const struct acpi_buffer *in,
+					struct acpi_buffer *out);
+extern acpi_status wmi_query_block(const char *guid, u8 instance,
+					struct acpi_buffer *out);
+extern acpi_status wmi_set_block(const char *guid, u8 instance,
+					const struct acpi_buffer *in);
+extern acpi_status wmi_install_notify_handler(const char *guid,
+					wmi_notify_handler handler, void *data);
+extern acpi_status wmi_remove_notify_handler(const char *guid);
+extern acpi_status wmi_get_event_data(u32 event, struct acpi_buffer *out);
+extern bool wmi_has_guid(const char *guid);
+
+#endif	/* CONFIG_ACPI_WMI */
+
+#define ACPI_VIDEO_OUTPUT_SWITCHING			0x0001
+#define ACPI_VIDEO_DEVICE_POSTING			0x0002
+#define ACPI_VIDEO_ROM_AVAILABLE			0x0004
+#define ACPI_VIDEO_BACKLIGHT				0x0008
+#define ACPI_VIDEO_BACKLIGHT_FORCE_VENDOR		0x0010
+#define ACPI_VIDEO_BACKLIGHT_FORCE_VIDEO		0x0020
+#define ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VENDOR	0x0040
+#define ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO		0x0080
+#define ACPI_VIDEO_BACKLIGHT_DMI_VENDOR			0x0100
+#define ACPI_VIDEO_BACKLIGHT_DMI_VIDEO			0x0200
+#define ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR		0x0400
+#define ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VIDEO		0x0800
+
+#if defined(CONFIG_ACPI_VIDEO) || defined(CONFIG_ACPI_VIDEO_MODULE)
+
+extern long acpi_video_get_capabilities(acpi_handle graphics_dev_handle);
+extern long acpi_is_video_device(struct acpi_device *device);
+extern int acpi_video_backlight_support(void);
+extern int acpi_video_display_switch_support(void);
+
+#else
+
+static inline long acpi_video_get_capabilities(acpi_handle graphics_dev_handle)
+{
+	return 0;
+}
+
+static inline long acpi_is_video_device(struct acpi_device *device)
+{
+	return 0;
+}
+
+static inline int acpi_video_backlight_support(void)
+{
+	return 0;
+}
+
+static inline int acpi_video_display_switch_support(void)
+{
+	return 0;
+}
+
+#endif /* defined(CONFIG_ACPI_VIDEO) || defined(CONFIG_ACPI_VIDEO_MODULE) */
+
+extern int acpi_blacklisted(void);
+extern void acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d);
+extern void acpi_osi_setup(char *str);
+
+#ifdef CONFIG_ACPI_NUMA
+int acpi_get_pxm(acpi_handle handle);
+int acpi_get_node(acpi_handle *handle);
+#else
+static inline int acpi_get_pxm(acpi_handle handle)
+{
+	return 0;
+}
+static inline int acpi_get_node(acpi_handle *handle)
+{
+	return 0;
+}
+#endif
+extern int acpi_paddr_to_node(u64 start_addr, u64 size);
+
+extern int pnpacpi_disabled;
+
+#define PXM_INVAL	(-1)
+
+int acpi_check_resource_conflict(const struct resource *res);
+
+int acpi_check_region(resource_size_t start, resource_size_t n,
+		      const char *name);
+
+int acpi_resources_are_enforced(void);
+
+#ifdef CONFIG_PM_SLEEP
+void __init acpi_no_s4_hw_signature(void);
+void __init acpi_old_suspend_ordering(void);
+void __init acpi_nvs_nosave(void);
+#endif /* CONFIG_PM_SLEEP */
+
+struct acpi_osc_context {
+	char *uuid_str; /* uuid string */
+	int rev;
+	struct acpi_buffer cap; /* arg2/arg3 */
+	struct acpi_buffer ret; /* free by caller if success */
+};
+
+#define OSC_QUERY_TYPE			0
+#define OSC_SUPPORT_TYPE 		1
+#define OSC_CONTROL_TYPE		2
+
+/* _OSC DW0 Definition */
+#define OSC_QUERY_ENABLE		1
+#define OSC_REQUEST_ERROR		2
+#define OSC_INVALID_UUID_ERROR		4
+#define OSC_INVALID_REVISION_ERROR	8
+#define OSC_CAPABILITIES_MASK_ERROR	16
+
+acpi_status acpi_run_osc(acpi_handle handle, struct acpi_osc_context *context);
+
+/* platform-wide _OSC bits */
+#define OSC_SB_PAD_SUPPORT		1
+#define OSC_SB_PPC_OST_SUPPORT		2
+#define OSC_SB_PR3_SUPPORT		4
+#define OSC_SB_CPUHP_OST_SUPPORT	8
+#define OSC_SB_APEI_SUPPORT		16
+
+extern bool osc_sb_apei_support_acked;
+
+/* PCI defined _OSC bits */
+/* _OSC DW1 Definition (OS Support Fields) */
+#define OSC_EXT_PCI_CONFIG_SUPPORT		1
+#define OSC_ACTIVE_STATE_PWR_SUPPORT 		2
+#define OSC_CLOCK_PWR_CAPABILITY_SUPPORT	4
+#define OSC_PCI_SEGMENT_GROUPS_SUPPORT		8
+#define OSC_MSI_SUPPORT				16
+#define OSC_PCI_SUPPORT_MASKS			0x1f
+
+/* _OSC DW1 Definition (OS Control Fields) */
+#define OSC_PCI_EXPRESS_NATIVE_HP_CONTROL	1
+#define OSC_SHPC_NATIVE_HP_CONTROL 		2
+#define OSC_PCI_EXPRESS_PME_CONTROL		4
+#define OSC_PCI_EXPRESS_AER_CONTROL		8
+#define OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL	16
+
+#define OSC_PCI_CONTROL_MASKS 	(OSC_PCI_EXPRESS_NATIVE_HP_CONTROL | 	\
+				OSC_SHPC_NATIVE_HP_CONTROL | 		\
+				OSC_PCI_EXPRESS_PME_CONTROL |		\
+				OSC_PCI_EXPRESS_AER_CONTROL |		\
+				OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL)
+
+#define OSC_PCI_NATIVE_HOTPLUG	(OSC_PCI_EXPRESS_NATIVE_HP_CONTROL |	\
+				OSC_SHPC_NATIVE_HP_CONTROL)
+
+extern acpi_status acpi_pci_osc_control_set(acpi_handle handle,
+					     u32 *mask, u32 req);
+extern void acpi_early_init(void);
+
+extern int acpi_nvs_register(__u64 start, __u64 size);
+
+extern int acpi_nvs_for_each_region(int (*func)(__u64, __u64, void *),
+				    void *data);
+
+#else	/* !CONFIG_ACPI */
+
+#define acpi_disabled 1
+
+static inline void acpi_early_init(void) { }
+
+static inline int early_acpi_boot_init(void)
+{
+	return 0;
+}
+static inline int acpi_boot_init(void)
+{
+	return 0;
+}
+
+static inline void acpi_boot_table_init(void)
+{
+	return;
+}
+
+static inline int acpi_mps_check(void)
+{
+	return 0;
+}
+
+static inline int acpi_check_resource_conflict(struct resource *res)
+{
+	return 0;
+}
+
+static inline int acpi_check_region(resource_size_t start, resource_size_t n,
+				    const char *name)
+{
+	return 0;
+}
+
+struct acpi_table_header;
+static inline int acpi_table_parse(char *id,
+				int (*handler)(struct acpi_table_header *))
+{
+	return -1;
+}
+
+static inline int acpi_nvs_register(__u64 start, __u64 size)
+{
+	return 0;
+}
+
+static inline int acpi_nvs_for_each_region(int (*func)(__u64, __u64, void *),
+					   void *data)
+{
+	return 0;
+}
+
+#endif	/* !CONFIG_ACPI */
+
+#ifdef CONFIG_ACPI
+void acpi_os_set_prepare_sleep(int (*func)(u8 sleep_state,
+			       u32 pm1a_ctrl,  u32 pm1b_ctrl));
+
+acpi_status acpi_os_prepare_sleep(u8 sleep_state,
+				  u32 pm1a_control, u32 pm1b_control);
+#else
+#define acpi_os_set_prepare_sleep(func, pm1a_ctrl, pm1b_ctrl) do { } while (0)
+#endif
+
+#endif	/*_LINUX_ACPI_H*/
diff --git a/include/linux/acpi_io.h b/include/linux/acpi_io.h
new file mode 100644
index 00000000..b0ffa219
--- /dev/null
+++ b/include/linux/acpi_io.h
@@ -0,0 +1,18 @@
+#ifndef _ACPI_IO_H_
+#define _ACPI_IO_H_
+
+#include <linux/io.h>
+#include <acpi/acpi.h>
+
+static inline void __iomem *acpi_os_ioremap(acpi_physical_address phys,
+					    acpi_size size)
+{
+       return ioremap_cache(phys, size);
+}
+
+void __iomem *acpi_os_get_iomem(acpi_physical_address phys, unsigned int size);
+
+int acpi_os_map_generic_address(struct acpi_generic_address *addr);
+void acpi_os_unmap_generic_address(struct acpi_generic_address *addr);
+
+#endif
diff --git a/include/linux/acpi_pmtmr.h b/include/linux/acpi_pmtmr.h
new file mode 100644
index 00000000..1d0ef1ae
--- /dev/null
+++ b/include/linux/acpi_pmtmr.h
@@ -0,0 +1,38 @@
+#ifndef _ACPI_PMTMR_H_
+#define _ACPI_PMTMR_H_
+
+#include <linux/clocksource.h>
+
+/* Number of PMTMR ticks expected during calibration run */
+#define PMTMR_TICKS_PER_SEC 3579545
+
+/* limit it to 24 bits */
+#define ACPI_PM_MASK CLOCKSOURCE_MASK(24)
+
+/* Overrun value */
+#define ACPI_PM_OVRRUN	(1<<24)
+
+#ifdef CONFIG_X86_PM_TIMER
+
+extern u32 acpi_pm_read_verified(void);
+extern u32 pmtmr_ioport;
+
+static inline u32 acpi_pm_read_early(void)
+{
+	if (!pmtmr_ioport)
+		return 0;
+	/* mask the output to 24 bits */
+	return acpi_pm_read_verified() & ACPI_PM_MASK;
+}
+
+#else
+
+static inline u32 acpi_pm_read_early(void)
+{
+	return 0;
+}
+
+#endif
+
+#endif
+
diff --git a/include/linux/adb.h b/include/linux/adb.h
new file mode 100644
index 00000000..63bca502
--- /dev/null
+++ b/include/linux/adb.h
@@ -0,0 +1,103 @@
+/*
+ * Definitions for ADB (Apple Desktop Bus) support.
+ */
+#ifndef __ADB_H
+#define __ADB_H
+
+/* ADB commands */
+#define ADB_BUSRESET		0
+#define ADB_FLUSH(id)		(0x01 | ((id) << 4))
+#define ADB_WRITEREG(id, reg)	(0x08 | (reg) | ((id) << 4))
+#define ADB_READREG(id, reg)	(0x0C | (reg) | ((id) << 4))
+
+/* ADB default device IDs (upper 4 bits of ADB command byte) */
+#define ADB_DONGLE	1	/* "software execution control" devices */
+#define ADB_KEYBOARD	2
+#define ADB_MOUSE	3
+#define ADB_TABLET	4
+#define ADB_MODEM	5
+#define ADB_MISC	7	/* maybe a monitor */
+
+#define ADB_RET_OK	0
+#define ADB_RET_TIMEOUT	3
+
+/* The kind of ADB request. The controller may emulate some
+   or all of those CUDA/PMU packet kinds */
+#define ADB_PACKET	0
+#define CUDA_PACKET	1
+#define ERROR_PACKET	2
+#define TIMER_PACKET	3
+#define POWER_PACKET	4
+#define MACIIC_PACKET	5
+#define PMU_PACKET	6
+#define ADB_QUERY	7
+
+/* ADB queries */
+
+/* ADB_QUERY_GETDEVINFO
+ * Query ADB slot for device presence
+ * data[2] = id, rep[0] = orig addr, rep[1] = handler_id
+ */
+#define ADB_QUERY_GETDEVINFO	1
+
+#ifdef __KERNEL__
+
+struct adb_request {
+	unsigned char data[32];
+	int nbytes;
+	unsigned char reply[32];
+	int reply_len;
+	unsigned char reply_expected;
+	unsigned char sent;
+	unsigned char complete;
+	void (*done)(struct adb_request *);
+	void *arg;
+	struct adb_request *next;
+};
+
+struct adb_ids {
+	int nids;
+	unsigned char id[16];
+};
+
+/* Structure which encapsulates a low-level ADB driver */
+
+struct adb_driver {
+	char name[16];
+	int (*probe)(void);
+	int (*init)(void);
+	int (*send_request)(struct adb_request *req, int sync);
+	int (*autopoll)(int devs);
+	void (*poll)(void);
+	int (*reset_bus)(void);
+};
+
+/* Values for adb_request flags */
+#define ADBREQ_REPLY	1	/* expect reply */
+#define ADBREQ_SYNC	2	/* poll until done */
+#define ADBREQ_NOSEND	4	/* build the request, but don't send it */
+
+/* Messages sent thru the client_list notifier. You should NOT stop
+   the operation, at least not with this version */
+enum adb_message {
+    ADB_MSG_POWERDOWN,	/* Currently called before sleep only */
+    ADB_MSG_PRE_RESET,	/* Called before resetting the bus */
+    ADB_MSG_POST_RESET	/* Called after resetting the bus (re-do init & register) */
+};
+extern struct blocking_notifier_head adb_client_list;
+
+int adb_request(struct adb_request *req, void (*done)(struct adb_request *),
+		int flags, int nbytes, ...);
+int adb_register(int default_id,int handler_id,struct adb_ids *ids,
+		 void (*handler)(unsigned char *, int, int));
+int adb_unregister(int index);
+void adb_poll(void);
+void adb_input(unsigned char *, int, int);
+int adb_reset_bus(void);
+
+int adb_try_handler_change(int address, int new_id);
+int adb_get_infos(int address, int *original_address, int *handler_id);
+
+#endif /* __KERNEL__ */
+
+#endif /* __ADB_H */
diff --git a/include/linux/adfs_fs.h b/include/linux/adfs_fs.h
new file mode 100644
index 00000000..b19801f7
--- /dev/null
+++ b/include/linux/adfs_fs.h
@@ -0,0 +1,63 @@
+#ifndef _ADFS_FS_H
+#define _ADFS_FS_H
+
+#include <linux/types.h>
+#include <linux/magic.h>
+
+/*
+ * Disc Record at disc address 0xc00
+ */
+struct adfs_discrecord {
+    __u8  log2secsize;
+    __u8  secspertrack;
+    __u8  heads;
+    __u8  density;
+    __u8  idlen;
+    __u8  log2bpmb;
+    __u8  skew;
+    __u8  bootoption;
+    __u8  lowsector;
+    __u8  nzones;
+    __le16 zone_spare;
+    __le32 root;
+    __le32 disc_size;
+    __le16 disc_id;
+    __u8  disc_name[10];
+    __le32 disc_type;
+    __le32 disc_size_high;
+    __u8  log2sharesize:4;
+    __u8  unused40:4;
+    __u8  big_flag:1;
+    __u8  unused41:1;
+    __u8  nzones_high;
+    __le32 format_version;
+    __le32 root_size;
+    __u8  unused52[60 - 52];
+};
+
+#define ADFS_DISCRECORD		(0xc00)
+#define ADFS_DR_OFFSET		(0x1c0)
+#define ADFS_DR_SIZE		 60
+#define ADFS_DR_SIZE_BITS	(ADFS_DR_SIZE << 3)
+
+#ifdef __KERNEL__
+/*
+ * Calculate the boot block checksum on an ADFS drive.  Note that this will
+ * appear to be correct if the sector contains all zeros, so also check that
+ * the disk size is non-zero!!!
+ */
+static inline int adfs_checkbblk(unsigned char *ptr)
+{
+	unsigned int result = 0;
+	unsigned char *p = ptr + 511;
+
+	do {
+	        result = (result & 0xff) + (result >> 8);
+        	result = result + *--p;
+	} while (p != ptr);
+
+	return (result & 0xff) != ptr[511];
+}
+#endif
+
+#endif
diff --git a/include/linux/aer.h b/include/linux/aer.h
new file mode 100644
index 00000000..544abdb2
--- /dev/null
+++ b/include/linux/aer.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2006 Intel Corp.
+ *     Tom Long Nguyen (tom.l.nguyen@intel.com)
+ *     Zhang Yanmin (yanmin.zhang@intel.com)
+ */
+
+#ifndef _AER_H_
+#define _AER_H_
+
+struct aer_header_log_regs {
+	unsigned int dw0;
+	unsigned int dw1;
+	unsigned int dw2;
+	unsigned int dw3;
+};
+
+struct aer_capability_regs {
+	u32 header;
+	u32 uncor_status;
+	u32 uncor_mask;
+	u32 uncor_severity;
+	u32 cor_status;
+	u32 cor_mask;
+	u32 cap_control;
+	struct aer_header_log_regs header_log;
+	u32 root_command;
+	u32 root_status;
+	u16 cor_err_source;
+	u16 uncor_err_source;
+};
+
+#if defined(CONFIG_PCIEAER)
+/* pci-e port driver needs this function to enable aer */
+extern int pci_enable_pcie_error_reporting(struct pci_dev *dev);
+extern int pci_disable_pcie_error_reporting(struct pci_dev *dev);
+extern int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev);
+#else
+static inline int pci_enable_pcie_error_reporting(struct pci_dev *dev)
+{
+	return -EINVAL;
+}
+static inline int pci_disable_pcie_error_reporting(struct pci_dev *dev)
+{
+	return -EINVAL;
+}
+static inline int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
+{
+	return -EINVAL;
+}
+#endif
+
+extern void cper_print_aer(const char *prefix, int cper_severity,
+			   struct aer_capability_regs *aer);
+extern int cper_severity_to_aer(int cper_severity);
+extern void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn,
+			      int severity);
+#endif //_AER_H_
+
diff --git a/include/linux/affs_hardblocks.h b/include/linux/affs_hardblocks.h
new file mode 100644
index 00000000..f1b948c1
--- /dev/null
+++ b/include/linux/affs_hardblocks.h
@@ -0,0 +1,68 @@
+#ifndef	AFFS_HARDBLOCKS_H
+#define	AFFS_HARDBLOCKS_H
+
+#include <linux/types.h>
+
+/* Just the needed definitions for the RDB of an Amiga HD. */
+
+struct RigidDiskBlock {
+	__u32	rdb_ID;
+	__be32	rdb_SummedLongs;
+	__s32	rdb_ChkSum;
+	__u32	rdb_HostID;
+	__be32	rdb_BlockBytes;
+	__u32	rdb_Flags;
+	__u32	rdb_BadBlockList;
+	__be32	rdb_PartitionList;
+	__u32	rdb_FileSysHeaderList;
+	__u32	rdb_DriveInit;
+	__u32	rdb_Reserved1[6];
+	__u32	rdb_Cylinders;
+	__u32	rdb_Sectors;
+	__u32	rdb_Heads;
+	__u32	rdb_Interleave;
+	__u32	rdb_Park;
+	__u32	rdb_Reserved2[3];
+	__u32	rdb_WritePreComp;
+	__u32	rdb_ReducedWrite;
+	__u32	rdb_StepRate;
+	__u32	rdb_Reserved3[5];
+	__u32	rdb_RDBBlocksLo;
+	__u32	rdb_RDBBlocksHi;
+	__u32	rdb_LoCylinder;
+	__u32	rdb_HiCylinder;
+	__u32	rdb_CylBlocks;
+	__u32	rdb_AutoParkSeconds;
+	__u32	rdb_HighRDSKBlock;
+	__u32	rdb_Reserved4;
+	char	rdb_DiskVendor[8];
+	char	rdb_DiskProduct[16];
+	char	rdb_DiskRevision[4];
+	char	rdb_ControllerVendor[8];
+	char	rdb_ControllerProduct[16];
+	char	rdb_ControllerRevision[4];
+	__u32	rdb_Reserved5[10];
+};
+
+#define	IDNAME_RIGIDDISK	0x5244534B	/* "RDSK" */
+
+struct PartitionBlock {
+	__be32	pb_ID;
+	__be32	pb_SummedLongs;
+	__s32	pb_ChkSum;
+	__u32	pb_HostID;
+	__be32	pb_Next;
+	__u32	pb_Flags;
+	__u32	pb_Reserved1[2];
+	__u32	pb_DevFlags;
+	__u8	pb_DriveName[32];
+	__u32	pb_Reserved2[15];
+	__be32	pb_Environment[17];
+	__u32	pb_EReserved[15];
+};
+
+#define	IDNAME_PARTITION	0x50415254	/* "PART" */
+
+#define RDB_ALLOCATION_LIMIT	16
+
+#endif	/* AFFS_HARDBLOCKS_H */
diff --git a/include/linux/agp_backend.h b/include/linux/agp_backend.h
new file mode 100644
index 00000000..eaf6cd75
--- /dev/null
+++ b/include/linux/agp_backend.h
@@ -0,0 +1,109 @@
+/*
+ * AGPGART backend specific includes. Not for userspace consumption.
+ *
+ * Copyright (C) 2004 Silicon Graphics, Inc.
+ * Copyright (C) 2002-2003 Dave Jones
+ * Copyright (C) 1999 Jeff Hartmann
+ * Copyright (C) 1999 Precision Insight, Inc.
+ * Copyright (C) 1999 Xi Graphics, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * JEFF HARTMANN, OR ANY OTHER CONTRIBUTORS BE LIABLE FOR ANY CLAIM, 
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR 
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE 
+ * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifndef _AGP_BACKEND_H
+#define _AGP_BACKEND_H 1
+
+#include <linux/list.h>
+
+enum chipset_type {
+	NOT_SUPPORTED,
+	SUPPORTED,
+};
+
+struct agp_version {
+	u16 major;
+	u16 minor;
+};
+
+struct agp_kern_info {
+	struct agp_version version;
+	struct pci_dev *device;
+	enum chipset_type chipset;
+	unsigned long mode;
+	unsigned long aper_base;
+	size_t aper_size;
+	int max_memory;		/* In pages */
+	int current_memory;
+	bool cant_use_aperture;
+	unsigned long page_mask;
+	const struct vm_operations_struct *vm_ops;
+};
+
+/*
+ * The agp_memory structure has information about the block of agp memory
+ * allocated.  A caller may manipulate the next and prev pointers to link
+ * each allocated item into a list.  These pointers are ignored by the backend.
+ * Everything else should never be written to, but the caller may read any of
+ * the items to determine the status of this block of agp memory.
+ */
+
+struct agp_bridge_data;
+
+struct agp_memory {
+	struct agp_memory *next;
+	struct agp_memory *prev;
+	struct agp_bridge_data *bridge;
+	struct page **pages;
+	size_t page_count;
+	int key;
+	int num_scratch_pages;
+	off_t pg_start;
+	u32 type;
+	u32 physical;
+	bool is_bound;
+	bool is_flushed;
+	/* list of agp_memory mapped to the aperture */
+	struct list_head mapped_list;
+	/* DMA-mapped addresses */
+	struct scatterlist *sg_list;
+	int num_sg;
+};
+
+#define AGP_NORMAL_MEMORY 0
+
+#define AGP_USER_TYPES (1 << 16)
+#define AGP_USER_MEMORY (AGP_USER_TYPES)
+#define AGP_USER_CACHED_MEMORY (AGP_USER_TYPES + 1)
+
+extern struct agp_bridge_data *agp_bridge;
+extern struct list_head agp_bridges;
+
+extern struct agp_bridge_data *(*agp_find_bridge)(struct pci_dev *);
+
+extern void agp_free_memory(struct agp_memory *);
+extern struct agp_memory *agp_allocate_memory(struct agp_bridge_data *, size_t, u32);
+extern int agp_copy_info(struct agp_bridge_data *, struct agp_kern_info *);
+extern int agp_bind_memory(struct agp_memory *, off_t);
+extern int agp_unbind_memory(struct agp_memory *);
+extern void agp_enable(struct agp_bridge_data *, u32);
+extern struct agp_bridge_data *agp_backend_acquire(struct pci_dev *);
+extern void agp_backend_release(struct agp_bridge_data *);
+
+#endif				/* _AGP_BACKEND_H */
diff --git a/include/linux/agpgart.h b/include/linux/agpgart.h
new file mode 100644
index 00000000..f6778ece
--- /dev/null
+++ b/include/linux/agpgart.h
@@ -0,0 +1,214 @@
+/*
+ * AGPGART module version 0.99
+ * Copyright (C) 1999 Jeff Hartmann
+ * Copyright (C) 1999 Precision Insight, Inc.
+ * Copyright (C) 1999 Xi Graphics, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * JEFF HARTMANN, OR ANY OTHER CONTRIBUTORS BE LIABLE FOR ANY CLAIM, 
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR 
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE 
+ * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifndef _AGP_H
+#define _AGP_H 1
+
+#define AGPIOC_BASE       'A'
+#define AGPIOC_INFO       _IOR (AGPIOC_BASE, 0, struct agp_info*)
+#define AGPIOC_ACQUIRE    _IO  (AGPIOC_BASE, 1)
+#define AGPIOC_RELEASE    _IO  (AGPIOC_BASE, 2)
+#define AGPIOC_SETUP      _IOW (AGPIOC_BASE, 3, struct agp_setup*)
+#define AGPIOC_RESERVE    _IOW (AGPIOC_BASE, 4, struct agp_region*)
+#define AGPIOC_PROTECT    _IOW (AGPIOC_BASE, 5, struct agp_region*)
+#define AGPIOC_ALLOCATE   _IOWR(AGPIOC_BASE, 6, struct agp_allocate*)
+#define AGPIOC_DEALLOCATE _IOW (AGPIOC_BASE, 7, int)
+#define AGPIOC_BIND       _IOW (AGPIOC_BASE, 8, struct agp_bind*)
+#define AGPIOC_UNBIND     _IOW (AGPIOC_BASE, 9, struct agp_unbind*)
+#define AGPIOC_CHIPSET_FLUSH _IO (AGPIOC_BASE, 10)
+
+#define AGP_DEVICE      "/dev/agpgart"
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#ifndef __KERNEL__
+#include <linux/types.h>
+
+struct agp_version {
+	__u16 major;
+	__u16 minor;
+};
+
+typedef struct _agp_info {
+	struct agp_version version;	/* version of the driver        */
+	__u32 bridge_id;	/* bridge vendor/device         */
+	__u32 agp_mode;		/* mode info of bridge          */
+	unsigned long aper_base;/* base of aperture             */
+	size_t aper_size;	/* size of aperture             */
+	size_t pg_total;	/* max pages (swap + system)    */
+	size_t pg_system;	/* max pages (system)           */
+	size_t pg_used;		/* current pages used           */
+} agp_info;
+
+typedef struct _agp_setup {
+	__u32 agp_mode;		/* mode info of bridge          */
+} agp_setup;
+
+/*
+ * The "prot" down below needs still a "sleep" flag somehow ...
+ */
+typedef struct _agp_segment {
+	__kernel_off_t pg_start;	/* starting page to populate    */
+	__kernel_size_t pg_count;	/* number of pages              */
+	int prot;			/* prot flags for mmap          */
+} agp_segment;
+
+typedef struct _agp_region {
+	__kernel_pid_t pid;		/* pid of process       */
+	__kernel_size_t seg_count;	/* number of segments   */
+	struct _agp_segment *seg_list;
+} agp_region;
+
+typedef struct _agp_allocate {
+	int key;		/* tag of allocation            */
+	__kernel_size_t pg_count;/* number of pages             */
+	__u32 type;		/* 0 == normal, other devspec   */
+   	__u32 physical;         /* device specific (some devices  
+				 * need a phys address of the     
+				 * actual page behind the gatt    
+				 * table)                        */
+} agp_allocate;
+
+typedef struct _agp_bind {
+	int key;		/* tag of allocation            */
+	__kernel_off_t pg_start;/* starting page to populate    */
+} agp_bind;
+
+typedef struct _agp_unbind {
+	int key;		/* tag of allocation            */
+	__u32 priority;		/* priority for paging out      */
+} agp_unbind;
+
+#else				/* __KERNEL__ */
+#include <linux/mutex.h>
+#include <linux/agp_backend.h>
+
+#define AGPGART_MINOR 175
+
+struct agp_info {
+	struct agp_version version;	/* version of the driver        */
+	u32 bridge_id;		/* bridge vendor/device         */
+	u32 agp_mode;		/* mode info of bridge          */
+	unsigned long aper_base;/* base of aperture             */
+	size_t aper_size;	/* size of aperture             */
+	size_t pg_total;	/* max pages (swap + system)    */
+	size_t pg_system;	/* max pages (system)           */
+	size_t pg_used;		/* current pages used           */
+};
+
+struct agp_setup {
+	u32 agp_mode;		/* mode info of bridge          */
+};
+
+/*
+ * The "prot" down below needs still a "sleep" flag somehow ...
+ */
+struct agp_segment {
+	off_t pg_start;		/* starting page to populate    */
+	size_t pg_count;	/* number of pages              */
+	int prot;		/* prot flags for mmap          */
+};
+
+struct agp_segment_priv {
+	off_t pg_start;
+	size_t pg_count;
+	pgprot_t prot;
+};
+
+struct agp_region {
+	pid_t pid;		/* pid of process               */
+	size_t seg_count;	/* number of segments           */
+	struct agp_segment *seg_list;
+};
+
+struct agp_allocate {
+	int key;		/* tag of allocation            */
+	size_t pg_count;	/* number of pages              */
+	u32 type;		/* 0 == normal, other devspec   */
+	u32 physical;           /* device specific (some devices  
+				 * need a phys address of the     
+				 * actual page behind the gatt    
+				 * table)                        */
+};
+
+struct agp_bind {
+	int key;		/* tag of allocation            */
+	off_t pg_start;		/* starting page to populate    */
+};
+
+struct agp_unbind {
+	int key;		/* tag of allocation            */
+	u32 priority;		/* priority for paging out      */
+};
+
+struct agp_client {
+	struct agp_client *next;
+	struct agp_client *prev;
+	pid_t pid;
+	int num_segments;
+	struct agp_segment_priv **segments;
+};
+
+struct agp_controller {
+	struct agp_controller *next;
+	struct agp_controller *prev;
+	pid_t pid;
+	int num_clients;
+	struct agp_memory *pool;
+	struct agp_client *clients;
+};
+
+#define AGP_FF_ALLOW_CLIENT		0
+#define AGP_FF_ALLOW_CONTROLLER 	1
+#define AGP_FF_IS_CLIENT		2
+#define AGP_FF_IS_CONTROLLER		3
+#define AGP_FF_IS_VALID 		4
+
+struct agp_file_private {
+	struct agp_file_private *next;
+	struct agp_file_private *prev;
+	pid_t my_pid;
+	unsigned long access_flags;	/* long req'd for set_bit --RR */
+};
+
+struct agp_front_data {
+	struct mutex agp_mutex;
+	struct agp_controller *current_controller;
+	struct agp_controller *controllers;
+	struct agp_file_private *file_priv_list;
+	bool used_by_controller;
+	bool backend_acquired;
+};
+
+#endif				/* __KERNEL__ */
+
+#endif				/* _AGP_H */
diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
new file mode 100644
index 00000000..73a25005
--- /dev/null
+++ b/include/linux/ahci_platform.h
@@ -0,0 +1,33 @@
+/*
+ * AHCI SATA platform driver
+ *
+ * Copyright 2004-2005  Red Hat, Inc.
+ *   Jeff Garzik <jgarzik@pobox.com>
+ * Copyright 2010  MontaVista Software, LLC.
+ *   Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ */
+
+#ifndef _AHCI_PLATFORM_H
+#define _AHCI_PLATFORM_H
+
+#include <linux/compiler.h>
+
+struct device;
+struct ata_port_info;
+
+struct ahci_platform_data {
+	int (*init)(struct device *dev, void __iomem *addr);
+	void (*exit)(struct device *dev);
+	int (*suspend)(struct device *dev);
+	int (*resume)(struct device *dev);
+	const struct ata_port_info *ata_port_info;
+	unsigned int force_port_map;
+	unsigned int mask_port_map;
+};
+
+#endif /* _AHCI_PLATFORM_H */
diff --git a/include/linux/aio.h b/include/linux/aio.h
new file mode 100644
index 00000000..b1a520ec
--- /dev/null
+++ b/include/linux/aio.h
@@ -0,0 +1,240 @@
+#ifndef __LINUX__AIO_H
+#define __LINUX__AIO_H
+
+#include <linux/list.h>
+#include <linux/workqueue.h>
+#include <linux/aio_abi.h>
+#include <linux/uio.h>
+#include <linux/rcupdate.h>
+
+#include <linux/atomic.h>
+
+#define AIO_MAXSEGS		4
+#define AIO_KIOGRP_NR_ATOMIC	8
+
+struct kioctx;
+
+/* Notes on cancelling a kiocb:
+ *	If a kiocb is cancelled, aio_complete may return 0 to indicate 
+ *	that cancel has not yet disposed of the kiocb.  All cancel 
+ *	operations *must* call aio_put_req to dispose of the kiocb 
+ *	to guard against races with the completion code.
+ */
+#define KIOCB_C_CANCELLED	0x01
+#define KIOCB_C_COMPLETE	0x02
+
+#define KIOCB_SYNC_KEY		(~0U)
+
+/* ki_flags bits */
+/*
+ * This may be used for cancel/retry serialization in the future, but
+ * for now it's unused and we probably don't want modules to even
+ * think they can use it.
+ */
+/* #define KIF_LOCKED		0 */
+#define KIF_KICKED		1
+#define KIF_CANCELLED		2
+
+#define kiocbTryLock(iocb)	test_and_set_bit(KIF_LOCKED, &(iocb)->ki_flags)
+#define kiocbTryKick(iocb)	test_and_set_bit(KIF_KICKED, &(iocb)->ki_flags)
+
+#define kiocbSetLocked(iocb)	set_bit(KIF_LOCKED, &(iocb)->ki_flags)
+#define kiocbSetKicked(iocb)	set_bit(KIF_KICKED, &(iocb)->ki_flags)
+#define kiocbSetCancelled(iocb)	set_bit(KIF_CANCELLED, &(iocb)->ki_flags)
+
+#define kiocbClearLocked(iocb)	clear_bit(KIF_LOCKED, &(iocb)->ki_flags)
+#define kiocbClearKicked(iocb)	clear_bit(KIF_KICKED, &(iocb)->ki_flags)
+#define kiocbClearCancelled(iocb)	clear_bit(KIF_CANCELLED, &(iocb)->ki_flags)
+
+#define kiocbIsLocked(iocb)	test_bit(KIF_LOCKED, &(iocb)->ki_flags)
+#define kiocbIsKicked(iocb)	test_bit(KIF_KICKED, &(iocb)->ki_flags)
+#define kiocbIsCancelled(iocb)	test_bit(KIF_CANCELLED, &(iocb)->ki_flags)
+
+/* is there a better place to document function pointer methods? */
+/**
+ * ki_retry	-	iocb forward progress callback
+ * @kiocb:	The kiocb struct to advance by performing an operation.
+ *
+ * This callback is called when the AIO core wants a given AIO operation
+ * to make forward progress.  The kiocb argument describes the operation
+ * that is to be performed.  As the operation proceeds, perhaps partially,
+ * ki_retry is expected to update the kiocb with progress made.  Typically
+ * ki_retry is set in the AIO core and it itself calls file_operations
+ * helpers.
+ *
+ * ki_retry's return value determines when the AIO operation is completed
+ * and an event is generated in the AIO event ring.  Except the special
+ * return values described below, the value that is returned from ki_retry
+ * is transferred directly into the completion ring as the operation's
+ * resulting status.  Once this has happened ki_retry *MUST NOT* reference
+ * the kiocb pointer again.
+ *
+ * If ki_retry returns -EIOCBQUEUED it has made a promise that aio_complete()
+ * will be called on the kiocb pointer in the future.  The AIO core will
+ * not ask the method again -- ki_retry must ensure forward progress.
+ * aio_complete() must be called once and only once in the future, multiple
+ * calls may result in undefined behaviour.
+ *
+ * If ki_retry returns -EIOCBRETRY it has made a promise that kick_iocb()
+ * will be called on the kiocb pointer in the future.  This may happen
+ * through generic helpers that associate kiocb->ki_wait with a wait
+ * queue head that ki_retry uses via current->io_wait.  It can also happen
+ * with custom tracking and manual calls to kick_iocb(), though that is
+ * discouraged.  In either case, kick_iocb() must be called once and only
+ * once.  ki_retry must ensure forward progress, the AIO core will wait
+ * indefinitely for kick_iocb() to be called.
+ */
+struct kiocb {
+	struct list_head	ki_run_list;
+	unsigned long		ki_flags;
+	int			ki_users;
+	unsigned		ki_key;		/* id of this request */
+
+	struct file		*ki_filp;
+	struct kioctx		*ki_ctx;	/* may be NULL for sync ops */
+	int			(*ki_cancel)(struct kiocb *, struct io_event *);
+	ssize_t			(*ki_retry)(struct kiocb *);
+	void			(*ki_dtor)(struct kiocb *);
+
+	union {
+		void __user		*user;
+		struct task_struct	*tsk;
+	} ki_obj;
+
+	__u64			ki_user_data;	/* user's data for completion */
+	loff_t			ki_pos;
+
+	void			*private;
+	/* State that we remember to be able to restart/retry  */
+	unsigned short		ki_opcode;
+	size_t			ki_nbytes; 	/* copy of iocb->aio_nbytes */
+	char 			__user *ki_buf;	/* remaining iocb->aio_buf */
+	size_t			ki_left; 	/* remaining bytes */
+	struct iovec		ki_inline_vec;	/* inline vector */
+ 	struct iovec		*ki_iovec;
+ 	unsigned long		ki_nr_segs;
+ 	unsigned long		ki_cur_seg;
+
+	struct list_head	ki_list;	/* the aio core uses this
+						 * for cancellation */
+	struct list_head	ki_batch;	/* batch allocation */
+
+	/*
+	 * If the aio_resfd field of the userspace iocb is not zero,
+	 * this is the underlying eventfd context to deliver events to.
+	 */
+	struct eventfd_ctx	*ki_eventfd;
+};
+
+#define is_sync_kiocb(iocb)	((iocb)->ki_key == KIOCB_SYNC_KEY)
+#define init_sync_kiocb(x, filp)			\
+	do {						\
+		struct task_struct *tsk = current;	\
+		(x)->ki_flags = 0;			\
+		(x)->ki_users = 1;			\
+		(x)->ki_key = KIOCB_SYNC_KEY;		\
+		(x)->ki_filp = (filp);			\
+		(x)->ki_ctx = NULL;			\
+		(x)->ki_cancel = NULL;			\
+		(x)->ki_retry = NULL;			\
+		(x)->ki_dtor = NULL;			\
+		(x)->ki_obj.tsk = tsk;			\
+		(x)->ki_user_data = 0;                  \
+		(x)->private = NULL;			\
+	} while (0)
+
+#define AIO_RING_MAGIC			0xa10a10a1
+#define AIO_RING_COMPAT_FEATURES	1
+#define AIO_RING_INCOMPAT_FEATURES	0
+struct aio_ring {
+	unsigned	id;	/* kernel internal index number */
+	unsigned	nr;	/* number of io_events */
+	unsigned	head;
+	unsigned	tail;
+
+	unsigned	magic;
+	unsigned	compat_features;
+	unsigned	incompat_features;
+	unsigned	header_length;	/* size of aio_ring */
+
+
+	struct io_event		io_events[0];
+}; /* 128 bytes + ring size */
+
+#define aio_ring_avail(info, ring)	(((ring)->head + (info)->nr - 1 - (ring)->tail) % (info)->nr)
+
+#define AIO_RING_PAGES	8
+struct aio_ring_info {
+	unsigned long		mmap_base;
+	unsigned long		mmap_size;
+
+	struct page		**ring_pages;
+	spinlock_t		ring_lock;
+	long			nr_pages;
+
+	unsigned		nr, tail;
+
+	struct page		*internal_pages[AIO_RING_PAGES];
+};
+
+struct kioctx {
+	atomic_t		users;
+	int			dead;
+	struct mm_struct	*mm;
+
+	/* This needs improving */
+	unsigned long		user_id;
+	struct hlist_node	list;
+
+	wait_queue_head_t	wait;
+
+	spinlock_t		ctx_lock;
+
+	int			reqs_active;
+	struct list_head	active_reqs;	/* used for cancellation */
+	struct list_head	run_list;	/* used for kicked reqs */
+
+	/* sys_io_setup currently limits this to an unsigned int */
+	unsigned		max_reqs;
+
+	struct aio_ring_info	ring_info;
+
+	struct delayed_work	wq;
+
+	struct rcu_head		rcu_head;
+};
+
+/* prototypes */
+extern unsigned aio_max_size;
+
+#ifdef CONFIG_AIO
+extern ssize_t wait_on_sync_kiocb(struct kiocb *iocb);
+extern int aio_put_req(struct kiocb *iocb);
+extern void kick_iocb(struct kiocb *iocb);
+extern int aio_complete(struct kiocb *iocb, long res, long res2);
+struct mm_struct;
+extern void exit_aio(struct mm_struct *mm);
+extern long do_io_submit(aio_context_t ctx_id, long nr,
+			 struct iocb __user *__user *iocbpp, bool compat);
+#else
+static inline ssize_t wait_on_sync_kiocb(struct kiocb *iocb) { return 0; }
+static inline int aio_put_req(struct kiocb *iocb) { return 0; }
+static inline void kick_iocb(struct kiocb *iocb) { }
+static inline int aio_complete(struct kiocb *iocb, long res, long res2) { return 0; }
+struct mm_struct;
+static inline void exit_aio(struct mm_struct *mm) { }
+static inline long do_io_submit(aio_context_t ctx_id, long nr,
+				struct iocb __user * __user *iocbpp,
+				bool compat) { return 0; }
+#endif /* CONFIG_AIO */
+
+static inline struct kiocb *list_kiocb(struct list_head *h)
+{
+	return list_entry(h, struct kiocb, ki_list);
+}
+
+/* for sysctl: */
+extern unsigned long aio_nr;
+extern unsigned long aio_max_nr;
+
+#endif /* __LINUX__AIO_H */
diff --git a/include/linux/aio_abi.h b/include/linux/aio_abi.h
new file mode 100644
index 00000000..86fa7a71
--- /dev/null
+++ b/include/linux/aio_abi.h
@@ -0,0 +1,111 @@
+/* include/linux/aio_abi.h
+ *
+ * Copyright 2000,2001,2002 Red Hat.
+ *
+ * Written by Benjamin LaHaise <bcrl@kvack.org>
+ *
+ * Distribute under the terms of the GPLv2 (see ../../COPYING) or under 
+ * the following terms.
+ *
+ * Permission to use, copy, modify, and distribute this software and its
+ * documentation is hereby granted, provided that the above copyright
+ * notice appears in all copies.  This software is provided without any
+ * warranty, express or implied.  Red Hat makes no representations about
+ * the suitability of this software for any purpose.
+ *
+ * IN NO EVENT SHALL RED HAT BE LIABLE TO ANY PARTY FOR DIRECT, INDIRECT,
+ * SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF
+ * THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF RED HAT HAS BEEN ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * RED HAT DISCLAIMS ANY WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS ON AN "AS IS" BASIS, AND
+ * RED HAT HAS NO OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES,
+ * ENHANCEMENTS, OR MODIFICATIONS.
+ */
+#ifndef __LINUX__AIO_ABI_H
+#define __LINUX__AIO_ABI_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+typedef __kernel_ulong_t aio_context_t;
+
+enum {
+	IOCB_CMD_PREAD = 0,
+	IOCB_CMD_PWRITE = 1,
+	IOCB_CMD_FSYNC = 2,
+	IOCB_CMD_FDSYNC = 3,
+	/* These two are experimental.
+	 * IOCB_CMD_PREADX = 4,
+	 * IOCB_CMD_POLL = 5,
+	 */
+	IOCB_CMD_NOOP = 6,
+	IOCB_CMD_PREADV = 7,
+	IOCB_CMD_PWRITEV = 8,
+};
+
+/*
+ * Valid flags for the "aio_flags" member of the "struct iocb".
+ *
+ * IOCB_FLAG_RESFD - Set if the "aio_resfd" member of the "struct iocb"
+ *                   is valid.
+ */
+#define IOCB_FLAG_RESFD		(1 << 0)
+
+/* read() from /dev/aio returns these structures. */
+struct io_event {
+	__u64		data;		/* the data field from the iocb */
+	__u64		obj;		/* what iocb this event came from */
+	__s64		res;		/* result code for this event */
+	__s64		res2;		/* secondary result */
+};
+
+#if defined(__LITTLE_ENDIAN)
+#define PADDED(x,y)	x, y
+#elif defined(__BIG_ENDIAN)
+#define PADDED(x,y)	y, x
+#else
+#error edit for your odd byteorder.
+#endif
+
+/*
+ * we always use a 64bit off_t when communicating
+ * with userland.  its up to libraries to do the
+ * proper padding and aio_error abstraction
+ */
+
+struct iocb {
+	/* these are internal to the kernel/libc. */
+	__u64	aio_data;	/* data to be returned in event's data */
+	__u32	PADDED(aio_key, aio_reserved1);
+				/* the kernel sets aio_key to the req # */
+
+	/* common fields */
+	__u16	aio_lio_opcode;	/* see IOCB_CMD_ above */
+	__s16	aio_reqprio;
+	__u32	aio_fildes;
+
+	__u64	aio_buf;
+	__u64	aio_nbytes;
+	__s64	aio_offset;
+
+	/* extra parameters */
+	__u64	aio_reserved2;	/* TODO: use this for a (struct sigevent *) */
+
+	/* flags for the "struct iocb" */
+	__u32	aio_flags;
+
+	/*
+	 * if the IOCB_FLAG_RESFD flag of "aio_flags" is set, this is an
+	 * eventfd to signal AIO readiness to
+	 */
+	__u32	aio_resfd;
+}; /* 64 bytes */
+
+#undef IFBIG
+#undef IFLITTLE
+
+#endif /* __LINUX__AIO_ABI_H */
+
diff --git a/include/linux/akm8975.h b/include/linux/akm8975.h
new file mode 100644
index 00000000..6a7c4326
--- /dev/null
+++ b/include/linux/akm8975.h
@@ -0,0 +1,87 @@
+/*
+ * Definitions for akm8975 compass chip.
+ */
+#ifndef AKM8975_H
+#define AKM8975_H
+
+#include <linux/ioctl.h>
+
+/*! \name AK8975 operation mode
+ \anchor AK8975_Mode
+ Defines an operation mode of the AK8975.*/
+/*! @{*/
+#define AK8975_MODE_SNG_MEASURE   0x01
+#define	AK8975_MODE_SELF_TEST     0x08
+#define	AK8975_MODE_FUSE_ACCESS   0x0F
+#define	AK8975_MODE_POWER_DOWN    0x00
+/*! @}*/
+
+#define RBUFF_SIZE		8	/* Rx buffer size */
+
+/*! \name AK8975 register address
+\anchor AK8975_REG
+Defines a register address of the AK8975.*/
+/*! @{*/
+#define AK8975_REG_WIA		0x00
+#define AK8975_REG_INFO		0x01
+#define AK8975_REG_ST1		0x02
+#define AK8975_REG_HXL		0x03
+#define AK8975_REG_HXH		0x04
+#define AK8975_REG_HYL		0x05
+#define AK8975_REG_HYH		0x06
+#define AK8975_REG_HZL		0x07
+#define AK8975_REG_HZH		0x08
+#define AK8975_REG_ST2		0x09
+#define AK8975_REG_CNTL		0x0A
+#define AK8975_REG_RSV		0x0B
+#define AK8975_REG_ASTC		0x0C
+#define AK8975_REG_TS1		0x0D
+#define AK8975_REG_TS2		0x0E
+#define AK8975_REG_I2CDIS	0x0F
+/*! @}*/
+
+/*! \name AK8975 fuse-rom address
+\anchor AK8975_FUSE
+Defines a read-only address of the fuse ROM of the AK8975.*/
+/*! @{*/
+#define AK8975_FUSE_ASAX	0x10
+#define AK8975_FUSE_ASAY	0x11
+#define AK8975_FUSE_ASAZ	0x12
+/*! @}*/
+
+#define AKMIO                   0xA1
+
+/* IOCTLs for AKM library */
+#define ECS_IOCTL_WRITE                 _IOW(AKMIO, 0x02, char[5])
+#define ECS_IOCTL_READ                  _IOWR(AKMIO, 0x03, char[5])
+#define ECS_IOCTL_GETDATA               _IOR(AKMIO, 0x08, char[RBUFF_SIZE])
+#define ECS_IOCTL_SET_YPR               _IOW(AKMIO, 0x0C, short[12])
+#define ECS_IOCTL_GET_OPEN_STATUS       _IOR(AKMIO, 0x0D, int)
+#define ECS_IOCTL_GET_CLOSE_STATUS      _IOR(AKMIO, 0x0E, int)
+#define ECS_IOCTL_GET_DELAY             _IOR(AKMIO, 0x30, short)
+
+/* IOCTLs for APPs */
+#define ECS_IOCTL_APP_SET_MFLAG		_IOW(AKMIO, 0x11, short)
+#define ECS_IOCTL_APP_GET_MFLAG		_IOW(AKMIO, 0x12, short)
+#define ECS_IOCTL_APP_SET_AFLAG		_IOW(AKMIO, 0x13, short)
+#define ECS_IOCTL_APP_GET_AFLAG		_IOR(AKMIO, 0x14, short)
+#define ECS_IOCTL_APP_SET_DELAY		_IOW(AKMIO, 0x18, short)
+#define ECS_IOCTL_APP_GET_DELAY		ECS_IOCTL_GET_DELAY
+/* Set raw magnetic vector flag */
+#define ECS_IOCTL_APP_SET_MVFLAG	_IOW(AKMIO, 0x19, short)
+/* Get raw magnetic vector flag */
+#define ECS_IOCTL_APP_GET_MVFLAG	_IOR(AKMIO, 0x1A, short)
+#define ECS_IOCTL_APP_SET_TFLAG         _IOR(AKMIO, 0x15, short)
+
+
+struct akm8975_platform_data {
+	int intr;
+
+	int (*init)(void);
+	void (*exit)(void);
+	int (*power_on)(void);
+	int (*power_off)(void);
+};
+
+#endif
+
diff --git a/include/linux/alarmtimer.h b/include/linux/alarmtimer.h
new file mode 100644
index 00000000..96c5c249
--- /dev/null
+++ b/include/linux/alarmtimer.h
@@ -0,0 +1,82 @@
+#ifndef _LINUX_ALARMTIMER_H
+#define _LINUX_ALARMTIMER_H
+
+#include <linux/time.h>
+#include <linux/hrtimer.h>
+#include <linux/timerqueue.h>
+#include <linux/rtc.h>
+
+enum alarmtimer_type {
+	ALARM_REALTIME,
+	ALARM_BOOTTIME,
+
+	ALARM_NUMTYPE,
+};
+
+enum alarmtimer_restart {
+	ALARMTIMER_NORESTART,
+	ALARMTIMER_RESTART,
+};
+
+
+#define ALARMTIMER_STATE_INACTIVE	0x00
+#define ALARMTIMER_STATE_ENQUEUED	0x01
+#define ALARMTIMER_STATE_CALLBACK	0x02
+
+/**
+ * struct alarm - Alarm timer structure
+ * @node:	timerqueue node for adding to the event list this value
+ *		also includes the expiration time.
+ * @period:	Period for recuring alarms
+ * @function:	Function pointer to be executed when the timer fires.
+ * @type:	Alarm type (BOOTTIME/REALTIME)
+ * @enabled:	Flag that represents if the alarm is set to fire or not
+ * @data:	Internal data value.
+ */
+struct alarm {
+	struct timerqueue_node	node;
+	enum alarmtimer_restart	(*function)(struct alarm *, ktime_t now);
+	enum alarmtimer_type	type;
+	int			state;
+	void			*data;
+};
+
+void alarm_init(struct alarm *alarm, enum alarmtimer_type type,
+		enum alarmtimer_restart (*function)(struct alarm *, ktime_t));
+void alarm_start(struct alarm *alarm, ktime_t start);
+int alarm_try_to_cancel(struct alarm *alarm);
+int alarm_cancel(struct alarm *alarm);
+
+u64 alarm_forward(struct alarm *alarm, ktime_t now, ktime_t interval);
+
+/*
+ * A alarmtimer is active, when it is enqueued into timerqueue or the
+ * callback function is running.
+ */
+static inline int alarmtimer_active(const struct alarm *timer)
+{
+	return timer->state != ALARMTIMER_STATE_INACTIVE;
+}
+
+/*
+ * Helper function to check, whether the timer is on one of the queues
+ */
+static inline int alarmtimer_is_queued(struct alarm *timer)
+{
+	return timer->state & ALARMTIMER_STATE_ENQUEUED;
+}
+
+/*
+ * Helper function to check, whether the timer is running the callback
+ * function
+ */
+static inline int alarmtimer_callback_running(struct alarm *timer)
+{
+	return timer->state & ALARMTIMER_STATE_CALLBACK;
+}
+
+
+/* Provide way to access the rtc device being used by alarmtimers */
+struct rtc_device *alarmtimer_get_rtcdev(void);
+
+#endif
diff --git a/include/linux/altera_jtaguart.h b/include/linux/altera_jtaguart.h
new file mode 100644
index 00000000..953b178a
--- /dev/null
+++ b/include/linux/altera_jtaguart.h
@@ -0,0 +1,16 @@
+/*
+ * altera_jtaguart.h -- Altera JTAG UART driver defines.
+ */
+
+#ifndef	__ALTJUART_H
+#define	__ALTJUART_H
+
+#define ALTERA_JTAGUART_MAJOR	204
+#define ALTERA_JTAGUART_MINOR	186
+
+struct altera_jtaguart_platform_uart {
+	unsigned long mapbase;	/* Physical address base */
+	unsigned int irq;	/* Interrupt vector */
+};
+
+#endif /* __ALTJUART_H */
diff --git a/include/linux/altera_uart.h b/include/linux/altera_uart.h
new file mode 100644
index 00000000..c022c82d
--- /dev/null
+++ b/include/linux/altera_uart.h
@@ -0,0 +1,15 @@
+/*
+ * altera_uart.h -- Altera UART driver defines.
+ */
+
+#ifndef	__ALTUART_H
+#define	__ALTUART_H
+
+struct altera_uart_platform_uart {
+	unsigned long mapbase;	/* Physical address base */
+	unsigned int irq;	/* Interrupt vector */
+	unsigned int uartclk;	/* UART clock rate */
+	unsigned int bus_shift;	/* Bus shift (address stride) */
+};
+
+#endif /* __ALTUART_H */
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
new file mode 100644
index 00000000..8d54f794
--- /dev/null
+++ b/include/linux/amba/bus.h
@@ -0,0 +1,130 @@
+/*
+ *  linux/include/amba/bus.h
+ *
+ *  This device type deals with ARM PrimeCells and anything else that
+ *  presents a proper CID (0xB105F00D) at the end of the I/O register
+ *  region or that is derived from a PrimeCell.
+ *
+ *  Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_AMBA_H
+#define ASMARM_AMBA_H
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/err.h>
+#include <linux/resource.h>
+#include <linux/regulator/consumer.h>
+
+#define AMBA_NR_IRQS	2
+#define AMBA_CID	0xb105f00d
+
+struct clk;
+
+struct amba_device {
+	struct device		dev;
+	struct resource		res;
+	struct clk		*pclk;
+	u64			dma_mask;
+	unsigned int		periphid;
+	unsigned int		irq[AMBA_NR_IRQS];
+};
+
+struct amba_driver {
+	struct device_driver	drv;
+	int			(*probe)(struct amba_device *, const struct amba_id *);
+	int			(*remove)(struct amba_device *);
+	void			(*shutdown)(struct amba_device *);
+	int			(*suspend)(struct amba_device *, pm_message_t);
+	int			(*resume)(struct amba_device *);
+	const struct amba_id	*id_table;
+};
+
+enum amba_vendor {
+	AMBA_VENDOR_ARM = 0x41,
+	AMBA_VENDOR_ST = 0x80,
+};
+
+extern struct bus_type amba_bustype;
+
+#define to_amba_device(d)	container_of(d, struct amba_device, dev)
+
+#define amba_get_drvdata(d)	dev_get_drvdata(&d->dev)
+#define amba_set_drvdata(d,p)	dev_set_drvdata(&d->dev, p)
+
+int amba_driver_register(struct amba_driver *);
+void amba_driver_unregister(struct amba_driver *);
+struct amba_device *amba_device_alloc(const char *, resource_size_t, size_t);
+void amba_device_put(struct amba_device *);
+int amba_device_add(struct amba_device *, struct resource *);
+int amba_device_register(struct amba_device *, struct resource *);
+void amba_device_unregister(struct amba_device *);
+struct amba_device *amba_find_device(const char *, struct device *, unsigned int, unsigned int);
+int amba_request_regions(struct amba_device *, const char *);
+void amba_release_regions(struct amba_device *);
+
+#define amba_pclk_enable(d)	\
+	(IS_ERR((d)->pclk) ? 0 : clk_enable((d)->pclk))
+
+#define amba_pclk_disable(d)	\
+	do { if (!IS_ERR((d)->pclk)) clk_disable((d)->pclk); } while (0)
+
+/* Some drivers don't use the struct amba_device */
+#define AMBA_CONFIG_BITS(a) (((a) >> 24) & 0xff)
+#define AMBA_REV_BITS(a) (((a) >> 20) & 0x0f)
+#define AMBA_MANF_BITS(a) (((a) >> 12) & 0xff)
+#define AMBA_PART_BITS(a) ((a) & 0xfff)
+
+#define amba_config(d)	AMBA_CONFIG_BITS((d)->periphid)
+#define amba_rev(d)	AMBA_REV_BITS((d)->periphid)
+#define amba_manf(d)	AMBA_MANF_BITS((d)->periphid)
+#define amba_part(d)	AMBA_PART_BITS((d)->periphid)
+
+#define __AMBA_DEV(busid, data, mask)				\
+	{							\
+		.coherent_dma_mask = mask,			\
+		.init_name = busid,				\
+		.platform_data = data,				\
+	}
+
+/*
+ * APB devices do not themselves have the ability to address memory,
+ * so DMA masks should be zero (much like USB peripheral devices.)
+ * The DMA controller DMA masks should be used instead (much like
+ * USB host controllers in conventional PCs.)
+ */
+#define AMBA_APB_DEVICE(name, busid, id, base, irqs, data)	\
+struct amba_device name##_device = {				\
+	.dev = __AMBA_DEV(busid, data, 0),			\
+	.res = DEFINE_RES_MEM(base, SZ_4K),			\
+	.irq = irqs,						\
+	.periphid = id,						\
+}
+
+/*
+ * AHB devices are DMA capable, so set their DMA masks
+ */
+#define AMBA_AHB_DEVICE(name, busid, id, base, irqs, data)	\
+struct amba_device name##_device = {				\
+	.dev = __AMBA_DEV(busid, data, ~0ULL),			\
+	.res = DEFINE_RES_MEM(base, SZ_4K),			\
+	.dma_mask = ~0ULL,					\
+	.irq = irqs,						\
+	.periphid = id,						\
+}
+
+/*
+ * module_amba_driver() - Helper macro for drivers that don't do anything
+ * special in module init/exit.  This eliminates a lot of boilerplate.  Each
+ * module may only use this macro once, and calling it replaces module_init()
+ * and module_exit()
+ */
+#define module_amba_driver(__amba_drv) \
+	module_driver(__amba_drv, amba_driver_register, amba_driver_unregister)
+
+#endif
diff --git a/include/linux/amba/clcd.h b/include/linux/amba/clcd.h
new file mode 100644
index 00000000..e82e3ee2
--- /dev/null
+++ b/include/linux/amba/clcd.h
@@ -0,0 +1,330 @@
+/*
+ * linux/include/asm-arm/hardware/amba_clcd.h -- Integrator LCD panel.
+ *
+ * David A Rusling
+ *
+ * Copyright (C) 2001 ARM Limited
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+#include <linux/fb.h>
+
+/*
+ * CLCD Controller Internal Register addresses
+ */
+#define CLCD_TIM0		0x00000000
+#define CLCD_TIM1 		0x00000004
+#define CLCD_TIM2 		0x00000008
+#define CLCD_TIM3 		0x0000000c
+#define CLCD_UBAS 		0x00000010
+#define CLCD_LBAS 		0x00000014
+
+#define CLCD_PL110_IENB		0x00000018
+#define CLCD_PL110_CNTL		0x0000001c
+#define CLCD_PL110_STAT		0x00000020
+#define CLCD_PL110_INTR 	0x00000024
+#define CLCD_PL110_UCUR		0x00000028
+#define CLCD_PL110_LCUR		0x0000002C
+
+#define CLCD_PL111_CNTL		0x00000018
+#define CLCD_PL111_IENB		0x0000001c
+#define CLCD_PL111_RIS		0x00000020
+#define CLCD_PL111_MIS		0x00000024
+#define CLCD_PL111_ICR		0x00000028
+#define CLCD_PL111_UCUR		0x0000002c
+#define CLCD_PL111_LCUR		0x00000030
+
+#define CLCD_PALL 		0x00000200
+#define CLCD_PALETTE		0x00000200
+
+#define TIM2_CLKSEL		(1 << 5)
+#define TIM2_IVS		(1 << 11)
+#define TIM2_IHS		(1 << 12)
+#define TIM2_IPC		(1 << 13)
+#define TIM2_IOE		(1 << 14)
+#define TIM2_BCD		(1 << 26)
+
+#define CNTL_LCDEN		(1 << 0)
+#define CNTL_LCDBPP1		(0 << 1)
+#define CNTL_LCDBPP2		(1 << 1)
+#define CNTL_LCDBPP4		(2 << 1)
+#define CNTL_LCDBPP8		(3 << 1)
+#define CNTL_LCDBPP16		(4 << 1)
+#define CNTL_LCDBPP16_565	(6 << 1)
+#define CNTL_LCDBPP16_444	(7 << 1)
+#define CNTL_LCDBPP24		(5 << 1)
+#define CNTL_LCDBW		(1 << 4)
+#define CNTL_LCDTFT		(1 << 5)
+#define CNTL_LCDMONO8		(1 << 6)
+#define CNTL_LCDDUAL		(1 << 7)
+#define CNTL_BGR		(1 << 8)
+#define CNTL_BEBO		(1 << 9)
+#define CNTL_BEPO		(1 << 10)
+#define CNTL_LCDPWR		(1 << 11)
+#define CNTL_LCDVCOMP(x)	((x) << 12)
+#define CNTL_LDMAFIFOTIME	(1 << 15)
+#define CNTL_WATERMARK		(1 << 16)
+
+enum {
+	/* individual formats */
+	CLCD_CAP_RGB444		= (1 << 0),
+	CLCD_CAP_RGB5551	= (1 << 1),
+	CLCD_CAP_RGB565		= (1 << 2),
+	CLCD_CAP_RGB888		= (1 << 3),
+	CLCD_CAP_BGR444		= (1 << 4),
+	CLCD_CAP_BGR5551	= (1 << 5),
+	CLCD_CAP_BGR565		= (1 << 6),
+	CLCD_CAP_BGR888		= (1 << 7),
+
+	/* connection layouts */
+	CLCD_CAP_444		= CLCD_CAP_RGB444 | CLCD_CAP_BGR444,
+	CLCD_CAP_5551		= CLCD_CAP_RGB5551 | CLCD_CAP_BGR5551,
+	CLCD_CAP_565		= CLCD_CAP_RGB565 | CLCD_CAP_BGR565,
+	CLCD_CAP_888		= CLCD_CAP_RGB888 | CLCD_CAP_BGR888,
+
+	/* red/blue ordering */
+	CLCD_CAP_RGB		= CLCD_CAP_RGB444 | CLCD_CAP_RGB5551 |
+				  CLCD_CAP_RGB565 | CLCD_CAP_RGB888,
+	CLCD_CAP_BGR		= CLCD_CAP_BGR444 | CLCD_CAP_BGR5551 |
+				  CLCD_CAP_BGR565 | CLCD_CAP_BGR888,
+
+	CLCD_CAP_ALL		= CLCD_CAP_BGR | CLCD_CAP_RGB,
+};
+
+struct clcd_panel {
+	struct fb_videomode	mode;
+	signed short		width;	/* width in mm */
+	signed short		height;	/* height in mm */
+	u32			tim2;
+	u32			tim3;
+	u32			cntl;
+	u32			caps;
+	unsigned int		bpp:8,
+				fixedtimings:1,
+				grayscale:1;
+	unsigned int		connector;
+};
+
+struct clcd_regs {
+	u32			tim0;
+	u32			tim1;
+	u32			tim2;
+	u32			tim3;
+	u32			cntl;
+	unsigned long		pixclock;
+};
+
+struct clcd_fb;
+
+/*
+ * the board-type specific routines
+ */
+struct clcd_board {
+	const char *name;
+
+	/*
+	 * Optional.  Hardware capability flags.
+	 */
+	u32	caps;
+
+	/*
+	 * Optional.  Check whether the var structure is acceptable
+	 * for this display.
+	 */
+	int	(*check)(struct clcd_fb *fb, struct fb_var_screeninfo *var);
+
+	/*
+	 * Compulsory.  Decode fb->fb.var into regs->*.  In the case of
+	 * fixed timing, set regs->* to the register values required.
+	 */
+	void	(*decode)(struct clcd_fb *fb, struct clcd_regs *regs);
+
+	/*
+	 * Optional.  Disable any extra display hardware.
+	 */
+	void	(*disable)(struct clcd_fb *);
+
+	/*
+	 * Optional.  Enable any extra display hardware.
+	 */
+	void	(*enable)(struct clcd_fb *);
+
+	/*
+	 * Setup platform specific parts of CLCD driver
+	 */
+	int	(*setup)(struct clcd_fb *);
+
+	/*
+	 * mmap the framebuffer memory
+	 */
+	int	(*mmap)(struct clcd_fb *, struct vm_area_struct *);
+
+	/*
+	 * Remove platform specific parts of CLCD driver
+	 */
+	void	(*remove)(struct clcd_fb *);
+};
+
+struct amba_device;
+struct clk;
+
+/* this data structure describes each frame buffer device we find */
+struct clcd_fb {
+	struct fb_info		fb;
+	struct amba_device	*dev;
+	struct clk		*clk;
+	struct clcd_panel	*panel;
+	struct clcd_board	*board;
+	void			*board_data;
+	void __iomem		*regs;
+	u16			off_ienb;
+	u16			off_cntl;
+	u32			clcd_cntl;
+	u32			cmap[16];
+	bool			clk_enabled;
+};
+
+static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs)
+{
+	struct fb_var_screeninfo *var = &fb->fb.var;
+	u32 val, cpl;
+
+	/*
+	 * Program the CLCD controller registers and start the CLCD
+	 */
+	val = ((var->xres / 16) - 1) << 2;
+	val |= (var->hsync_len - 1) << 8;
+	val |= (var->right_margin - 1) << 16;
+	val |= (var->left_margin - 1) << 24;
+	regs->tim0 = val;
+
+	val = var->yres;
+	if (fb->panel->cntl & CNTL_LCDDUAL)
+		val /= 2;
+	val -= 1;
+	val |= (var->vsync_len - 1) << 10;
+	val |= var->lower_margin << 16;
+	val |= var->upper_margin << 24;
+	regs->tim1 = val;
+
+	val = fb->panel->tim2;
+	val |= var->sync & FB_SYNC_HOR_HIGH_ACT  ? 0 : TIM2_IHS;
+	val |= var->sync & FB_SYNC_VERT_HIGH_ACT ? 0 : TIM2_IVS;
+
+	cpl = var->xres_virtual;
+	if (fb->panel->cntl & CNTL_LCDTFT)	  /* TFT */
+		/* / 1 */;
+	else if (!var->grayscale)		  /* STN color */
+		cpl = cpl * 8 / 3;
+	else if (fb->panel->cntl & CNTL_LCDMONO8) /* STN monochrome, 8bit */
+		cpl /= 8;
+	else					  /* STN monochrome, 4bit */
+		cpl /= 4;
+
+	regs->tim2 = val | ((cpl - 1) << 16);
+
+	regs->tim3 = fb->panel->tim3;
+
+	val = fb->panel->cntl;
+	if (var->grayscale)
+		val |= CNTL_LCDBW;
+
+	if (fb->panel->caps && fb->board->caps &&
+	    var->bits_per_pixel >= 16) {
+		/*
+		 * if board and panel supply capabilities, we can support
+		 * changing BGR/RGB depending on supplied parameters
+		 */
+		if (var->red.offset == 0)
+			val &= ~CNTL_BGR;
+		else
+			val |= CNTL_BGR;
+	}
+
+	switch (var->bits_per_pixel) {
+	case 1:
+		val |= CNTL_LCDBPP1;
+		break;
+	case 2:
+		val |= CNTL_LCDBPP2;
+		break;
+	case 4:
+		val |= CNTL_LCDBPP4;
+		break;
+	case 8:
+		val |= CNTL_LCDBPP8;
+		break;
+	case 16:
+		/*
+		 * PL110 cannot choose between 5551 and 565 modes in its
+		 * control register.  It is possible to use 565 with
+		 * custom external wiring.
+		 */
+		if (amba_part(fb->dev) == 0x110 ||
+		    var->green.length == 5)
+			val |= CNTL_LCDBPP16;
+		else if (var->green.length == 6)
+			val |= CNTL_LCDBPP16_565;
+		else
+			val |= CNTL_LCDBPP16_444;
+		break;
+	case 32:
+		val |= CNTL_LCDBPP24;
+		break;
+	}
+
+	regs->cntl = val;
+	regs->pixclock = var->pixclock;
+}
+
+static inline int clcdfb_check(struct clcd_fb *fb, struct fb_var_screeninfo *var)
+{
+	var->xres_virtual = var->xres = (var->xres + 15) & ~15;
+	var->yres_virtual = var->yres = (var->yres + 1) & ~1;
+
+#define CHECK(e,l,h) (var->e < l || var->e > h)
+	if (CHECK(right_margin, (5+1), 256) ||	/* back porch */
+	    CHECK(left_margin, (5+1), 256) ||	/* front porch */
+	    CHECK(hsync_len, (5+1), 256) ||
+	    var->xres > 4096 ||
+	    var->lower_margin > 255 ||		/* back porch */
+	    var->upper_margin > 255 ||		/* front porch */
+	    var->vsync_len > 32 ||
+	    var->yres > 1024)
+		return -EINVAL;
+#undef CHECK
+
+	/* single panel mode: PCD = max(PCD, 1) */
+	/* dual panel mode: PCD = max(PCD, 5) */
+
+	/*
+	 * You can't change the grayscale setting, and
+	 * we can only do non-interlaced video.
+	 */
+	if (var->grayscale != fb->fb.var.grayscale ||
+	    (var->vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED)
+		return -EINVAL;
+
+#define CHECK(e) (var->e != fb->fb.var.e)
+	if (fb->panel->fixedtimings &&
+	    (CHECK(xres)		||
+	     CHECK(yres)		||
+	     CHECK(bits_per_pixel)	||
+	     CHECK(pixclock)		||
+	     CHECK(left_margin)		||
+	     CHECK(right_margin)	||
+	     CHECK(upper_margin)	||
+	     CHECK(lower_margin)	||
+	     CHECK(hsync_len)		||
+	     CHECK(vsync_len)		||
+	     CHECK(sync)))
+		return -EINVAL;
+#undef CHECK
+
+	var->nonstd = 0;
+	var->accel_flags = 0;
+
+	return 0;
+}
diff --git a/include/linux/amba/kmi.h b/include/linux/amba/kmi.h
new file mode 100644
index 00000000..a39e5be7
--- /dev/null
+++ b/include/linux/amba/kmi.h
@@ -0,0 +1,92 @@
+/*
+ *  linux/include/asm-arm/hardware/amba_kmi.h
+ *
+ *  Internal header file for AMBA KMI ports
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ *
+ * ---------------------------------------------------------------------------
+ *  From ARM PrimeCell(tm) PS2 Keyboard/Mouse Interface (PL050) Technical
+ *  Reference Manual - ARM DDI 0143B - see http://www.arm.com/
+ * ---------------------------------------------------------------------------
+ */
+#ifndef ASM_ARM_HARDWARE_AMBA_KMI_H
+#define ASM_ARM_HARDWARE_AMBA_KMI_H
+
+/*
+ * KMI control register:
+ *  KMICR_TYPE       0 = PS2/AT mode, 1 = No line control bit mode
+ *  KMICR_RXINTREN   1 = enable RX interrupts
+ *  KMICR_TXINTREN   1 = enable TX interrupts
+ *  KMICR_EN         1 = enable KMI
+ *  KMICR_FD         1 = force KMI data low
+ *  KMICR_FC         1 = force KMI clock low
+ */
+#define KMICR		(KMI_BASE + 0x00)
+#define KMICR_TYPE		(1 << 5)
+#define KMICR_RXINTREN		(1 << 4)
+#define KMICR_TXINTREN		(1 << 3)
+#define KMICR_EN		(1 << 2)
+#define KMICR_FD		(1 << 1)
+#define KMICR_FC		(1 << 0)
+
+/*
+ * KMI status register:
+ *  KMISTAT_TXEMPTY  1 = transmitter register empty
+ *  KMISTAT_TXBUSY   1 = currently sending data
+ *  KMISTAT_RXFULL   1 = receiver register ready to be read
+ *  KMISTAT_RXBUSY   1 = currently receiving data
+ *  KMISTAT_RXPARITY parity of last databyte received
+ *  KMISTAT_IC       current level of KMI clock input
+ *  KMISTAT_ID       current level of KMI data input
+ */
+#define KMISTAT		(KMI_BASE + 0x04)
+#define KMISTAT_TXEMPTY		(1 << 6)
+#define KMISTAT_TXBUSY		(1 << 5)
+#define KMISTAT_RXFULL		(1 << 4)
+#define KMISTAT_RXBUSY		(1 << 3)
+#define KMISTAT_RXPARITY	(1 << 2)
+#define KMISTAT_IC		(1 << 1)
+#define KMISTAT_ID		(1 << 0)
+
+/*
+ * KMI data register
+ */
+#define KMIDATA		(KMI_BASE + 0x08)
+
+/*
+ * KMI clock divisor: to generate 8MHz internal clock
+ *  div = (ref / 8MHz) - 1; 0 <= div <= 15
+ */
+#define KMICLKDIV	(KMI_BASE + 0x0c)
+
+/*
+ * KMI interrupt register:
+ *  KMIIR_TXINTR     1 = transmit interrupt asserted
+ *  KMIIR_RXINTR     1 = receive interrupt asserted
+ */
+#define KMIIR		(KMI_BASE + 0x10)
+#define KMIIR_TXINTR		(1 << 1)
+#define KMIIR_RXINTR		(1 << 0)
+
+/*
+ * The size of the KMI primecell
+ */
+#define KMI_SIZE	(0x100)
+
+#endif
diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h
new file mode 100644
index 00000000..9d1d9caf
--- /dev/null
+++ b/include/linux/amba/mmci.h
@@ -0,0 +1,90 @@
+/*
+ *  include/linux/amba/mmci.h
+ */
+#ifndef AMBA_MMCI_H
+#define AMBA_MMCI_H
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/sdio_func.h>
+
+struct embedded_sdio_data {
+        struct sdio_cis cis;
+        struct sdio_cccr cccr;
+        struct sdio_embedded_func *funcs;
+        int num_funcs;
+};
+
+
+/*
+ * These defines is places here due to access is needed from machine
+ * configuration files. The ST Micro version does not have ROD and
+ * reuse the voltage registers for direction settings.
+ */
+#define MCI_ST_DATA2DIREN	(1 << 2)
+#define MCI_ST_CMDDIREN		(1 << 3)
+#define MCI_ST_DATA0DIREN	(1 << 4)
+#define MCI_ST_DATA31DIREN	(1 << 5)
+#define MCI_ST_FBCLKEN		(1 << 7)
+#define MCI_ST_DATA74DIREN	(1 << 8)
+
+/* Just some dummy forwarding */
+struct dma_chan;
+
+/**
+ * struct mmci_platform_data - platform configuration for the MMCI
+ * (also known as PL180) block.
+ * @f_max: the maximum operational frequency for this host in this
+ * platform configuration. When this is specified it takes precedence
+ * over the module parameter for the same frequency.
+ * @ocr_mask: available voltages on the 4 pins from the block, this
+ * is ignored if a regulator is used, see the MMC_VDD_* masks in
+ * mmc/host.h
+ * @ios_handler: a callback function to act on specfic ios changes,
+ * used for example to control a levelshifter
+ * mask into a value to be binary (or set some other custom bits
+ * in MMCIPWR) or:ed and written into the MMCIPWR register of the
+ * block.  May also control external power based on the power_mode.
+ * @status: if no GPIO read function was given to the block in
+ * gpio_wp (below) this function will be called to determine
+ * whether a card is present in the MMC slot or not
+ * @gpio_wp: read this GPIO pin to see if the card is write protected
+ * @gpio_cd: read this GPIO pin to detect card insertion
+ * @cd_invert: true if the gpio_cd pin value is active low
+ * @capabilities: the capabilities of the block as implemented in
+ * this platform, signify anything MMC_CAP_* from mmc/host.h
+ * @capabilities2: more capabilities, MMC_CAP2_* from mmc/host.h
+ * @sigdir: a bit field indicating for what bits in the MMC bus the host
+ * should enable signal direction indication.
+ * @dma_filter: function used to select an appropriate RX and TX
+ * DMA channel to be used for DMA, if and only if you're deploying the
+ * generic DMA engine
+ * @dma_rx_param: parameter passed to the DMA allocation
+ * filter in order to select an appropriate RX channel. If
+ * there is a bidirectional RX+TX channel, then just specify
+ * this and leave dma_tx_param set to NULL
+ * @dma_tx_param: parameter passed to the DMA allocation
+ * filter in order to select an appropriate TX channel. If this
+ * is NULL the driver will attempt to use the RX channel as a
+ * bidirectional channel
+ */
+struct mmci_platform_data {
+	unsigned int f_max;
+	unsigned int ocr_mask;
+	int (*ios_handler)(struct device *, struct mmc_ios *);
+	unsigned int (*status)(struct device *);
+	int	gpio_wp;
+	int	gpio_cd;
+	bool	cd_invert;
+	unsigned long capabilities;
+	unsigned long capabilities2;
+	u32 sigdir;
+	bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
+	void *dma_rx_param;
+	void *dma_tx_param;
+	unsigned int status_irq;
+	struct embedded_sdio_data *embedded_sdio;
+	int (*register_status_notify)(void (*callback)(int card_present, void *dev_id), void *dev_id);
+};
+
+#endif
diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h
new file mode 100644
index 00000000..76dd1b19
--- /dev/null
+++ b/include/linux/amba/pl022.h
@@ -0,0 +1,300 @@
+/*
+ * include/linux/amba/pl022.h
+ *
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * Copyright (C) 2006 STMicroelectronics Pvt. Ltd.
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ * Initial version inspired by:
+ *	linux-2.6.17-rc3-mm1/drivers/spi/pxa2xx_spi.c
+ * Initial adoption to PL022 by:
+ *      Sachin Verma <sachin.verma@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _SSP_PL022_H
+#define _SSP_PL022_H
+
+#include <linux/types.h>
+
+/**
+ * whether SSP is in loopback mode or not
+ */
+enum ssp_loopback {
+	LOOPBACK_DISABLED,
+	LOOPBACK_ENABLED
+};
+
+/**
+ * enum ssp_interface - interfaces allowed for this SSP Controller
+ * @SSP_INTERFACE_MOTOROLA_SPI: Motorola Interface
+ * @SSP_INTERFACE_TI_SYNC_SERIAL: Texas Instrument Synchronous Serial
+ * interface
+ * @SSP_INTERFACE_NATIONAL_MICROWIRE: National Semiconductor Microwire
+ * interface
+ * @SSP_INTERFACE_UNIDIRECTIONAL: Unidirectional interface (STn8810
+ * &STn8815 only)
+ */
+enum ssp_interface {
+	SSP_INTERFACE_MOTOROLA_SPI,
+	SSP_INTERFACE_TI_SYNC_SERIAL,
+	SSP_INTERFACE_NATIONAL_MICROWIRE,
+	SSP_INTERFACE_UNIDIRECTIONAL
+};
+
+/**
+ * enum ssp_hierarchy - whether SSP is configured as Master or Slave
+ */
+enum ssp_hierarchy {
+	SSP_MASTER,
+	SSP_SLAVE
+};
+
+/**
+ * enum ssp_clock_params - clock parameters, to set SSP clock at a
+ * desired freq
+ */
+struct ssp_clock_params {
+	u8 cpsdvsr; /* value from 2 to 254 (even only!) */
+	u8 scr;	    /* value from 0 to 255 */
+};
+
+/**
+ * enum ssp_rx_endian - endianess of Rx FIFO Data
+ * this feature is only available in ST versionf of PL022
+ */
+enum ssp_rx_endian {
+	SSP_RX_MSB,
+	SSP_RX_LSB
+};
+
+/**
+ * enum ssp_tx_endian - endianess of Tx FIFO Data
+ */
+enum ssp_tx_endian {
+	SSP_TX_MSB,
+	SSP_TX_LSB
+};
+
+/**
+ * enum ssp_data_size - number of bits in one data element
+ */
+enum ssp_data_size {
+	SSP_DATA_BITS_4 = 0x03, SSP_DATA_BITS_5, SSP_DATA_BITS_6,
+	SSP_DATA_BITS_7, SSP_DATA_BITS_8, SSP_DATA_BITS_9,
+	SSP_DATA_BITS_10, SSP_DATA_BITS_11, SSP_DATA_BITS_12,
+	SSP_DATA_BITS_13, SSP_DATA_BITS_14, SSP_DATA_BITS_15,
+	SSP_DATA_BITS_16, SSP_DATA_BITS_17, SSP_DATA_BITS_18,
+	SSP_DATA_BITS_19, SSP_DATA_BITS_20, SSP_DATA_BITS_21,
+	SSP_DATA_BITS_22, SSP_DATA_BITS_23, SSP_DATA_BITS_24,
+	SSP_DATA_BITS_25, SSP_DATA_BITS_26, SSP_DATA_BITS_27,
+	SSP_DATA_BITS_28, SSP_DATA_BITS_29, SSP_DATA_BITS_30,
+	SSP_DATA_BITS_31, SSP_DATA_BITS_32
+};
+
+/**
+ * enum ssp_mode - SSP mode of operation (Communication modes)
+ */
+enum ssp_mode {
+	INTERRUPT_TRANSFER,
+	POLLING_TRANSFER,
+	DMA_TRANSFER
+};
+
+/**
+ * enum ssp_rx_level_trig - receive FIFO watermark level which triggers
+ * IT: Interrupt fires when _N_ or more elements in RX FIFO.
+ */
+enum ssp_rx_level_trig {
+	SSP_RX_1_OR_MORE_ELEM,
+	SSP_RX_4_OR_MORE_ELEM,
+	SSP_RX_8_OR_MORE_ELEM,
+	SSP_RX_16_OR_MORE_ELEM,
+	SSP_RX_32_OR_MORE_ELEM
+};
+
+/**
+ * Transmit FIFO watermark level which triggers (IT Interrupt fires
+ * when _N_ or more empty locations in TX FIFO)
+ */
+enum ssp_tx_level_trig {
+	SSP_TX_1_OR_MORE_EMPTY_LOC,
+	SSP_TX_4_OR_MORE_EMPTY_LOC,
+	SSP_TX_8_OR_MORE_EMPTY_LOC,
+	SSP_TX_16_OR_MORE_EMPTY_LOC,
+	SSP_TX_32_OR_MORE_EMPTY_LOC
+};
+
+/**
+ * enum SPI Clock Phase - clock phase (Motorola SPI interface only)
+ * @SSP_CLK_FIRST_EDGE: Receive data on first edge transition (actual direction depends on polarity)
+ * @SSP_CLK_SECOND_EDGE: Receive data on second edge transition (actual direction depends on polarity)
+ */
+enum ssp_spi_clk_phase {
+	SSP_CLK_FIRST_EDGE,
+	SSP_CLK_SECOND_EDGE
+};
+
+/**
+ * enum SPI Clock Polarity - clock polarity (Motorola SPI interface only)
+ * @SSP_CLK_POL_IDLE_LOW: Low inactive level
+ * @SSP_CLK_POL_IDLE_HIGH: High inactive level
+ */
+enum ssp_spi_clk_pol {
+	SSP_CLK_POL_IDLE_LOW,
+	SSP_CLK_POL_IDLE_HIGH
+};
+
+/**
+ * Microwire Conrol Lengths Command size in microwire format
+ */
+enum ssp_microwire_ctrl_len {
+	SSP_BITS_4 = 0x03, SSP_BITS_5, SSP_BITS_6,
+	SSP_BITS_7, SSP_BITS_8, SSP_BITS_9,
+	SSP_BITS_10, SSP_BITS_11, SSP_BITS_12,
+	SSP_BITS_13, SSP_BITS_14, SSP_BITS_15,
+	SSP_BITS_16, SSP_BITS_17, SSP_BITS_18,
+	SSP_BITS_19, SSP_BITS_20, SSP_BITS_21,
+	SSP_BITS_22, SSP_BITS_23, SSP_BITS_24,
+	SSP_BITS_25, SSP_BITS_26, SSP_BITS_27,
+	SSP_BITS_28, SSP_BITS_29, SSP_BITS_30,
+	SSP_BITS_31, SSP_BITS_32
+};
+
+/**
+ * enum Microwire Wait State
+ * @SSP_MWIRE_WAIT_ZERO: No wait state inserted after last command bit
+ * @SSP_MWIRE_WAIT_ONE: One wait state inserted after last command bit
+ */
+enum ssp_microwire_wait_state {
+	SSP_MWIRE_WAIT_ZERO,
+	SSP_MWIRE_WAIT_ONE
+};
+
+/**
+ * enum ssp_duplex - whether Full/Half Duplex on microwire, only
+ * available in the ST Micro variant.
+ * @SSP_MICROWIRE_CHANNEL_FULL_DUPLEX: SSPTXD becomes bi-directional,
+ *     SSPRXD not used
+ * @SSP_MICROWIRE_CHANNEL_HALF_DUPLEX: SSPTXD is an output, SSPRXD is
+ *     an input.
+ */
+enum ssp_duplex {
+	SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
+	SSP_MICROWIRE_CHANNEL_HALF_DUPLEX
+};
+
+/**
+ * enum ssp_clkdelay - an optional clock delay on the feedback clock
+ * only available in the ST Micro PL023 variant.
+ * @SSP_FEEDBACK_CLK_DELAY_NONE: no delay, the data coming in from the
+ * slave is sampled directly
+ * @SSP_FEEDBACK_CLK_DELAY_1T: the incoming slave data is sampled with
+ * a delay of T-dt
+ * @SSP_FEEDBACK_CLK_DELAY_2T: dito with a delay if 2T-dt
+ * @SSP_FEEDBACK_CLK_DELAY_3T: dito with a delay if 3T-dt
+ * @SSP_FEEDBACK_CLK_DELAY_4T: dito with a delay if 4T-dt
+ * @SSP_FEEDBACK_CLK_DELAY_5T: dito with a delay if 5T-dt
+ * @SSP_FEEDBACK_CLK_DELAY_6T: dito with a delay if 6T-dt
+ * @SSP_FEEDBACK_CLK_DELAY_7T: dito with a delay if 7T-dt
+ */
+enum ssp_clkdelay {
+	SSP_FEEDBACK_CLK_DELAY_NONE,
+	SSP_FEEDBACK_CLK_DELAY_1T,
+	SSP_FEEDBACK_CLK_DELAY_2T,
+	SSP_FEEDBACK_CLK_DELAY_3T,
+	SSP_FEEDBACK_CLK_DELAY_4T,
+	SSP_FEEDBACK_CLK_DELAY_5T,
+	SSP_FEEDBACK_CLK_DELAY_6T,
+	SSP_FEEDBACK_CLK_DELAY_7T
+};
+
+/**
+ * CHIP select/deselect commands
+ */
+enum ssp_chip_select {
+	SSP_CHIP_SELECT,
+	SSP_CHIP_DESELECT
+};
+
+
+struct dma_chan;
+/**
+ * struct pl022_ssp_master - device.platform_data for SPI controller devices.
+ * @num_chipselect: chipselects are used to distinguish individual
+ *     SPI slaves, and are numbered from zero to num_chipselects - 1.
+ *     each slave has a chipselect signal, but it's common that not
+ *     every chipselect is connected to a slave.
+ * @enable_dma: if true enables DMA driven transfers.
+ * @dma_rx_param: parameter to locate an RX DMA channel.
+ * @dma_tx_param: parameter to locate a TX DMA channel.
+ * @autosuspend_delay: delay in ms following transfer completion before the
+ *     runtime power management system suspends the device. A setting of 0
+ *     indicates no delay and the device will be suspended immediately.
+ * @rt: indicates the controller should run the message pump with realtime
+ *     priority to minimise the transfer latency on the bus.
+ */
+struct pl022_ssp_controller {
+	u16 bus_id;
+	u8 num_chipselect;
+	u8 enable_dma:1;
+	bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
+	void *dma_rx_param;
+	void *dma_tx_param;
+	int autosuspend_delay;
+	bool rt;
+};
+
+/**
+ * struct ssp_config_chip - spi_board_info.controller_data for SPI
+ * slave devices, copied to spi_device.controller_data.
+ *
+ * @lbm: used for test purpose to internally connect RX and TX
+ * @iface: Interface type(Motorola, TI, Microwire, Universal)
+ * @hierarchy: sets whether interface is master or slave
+ * @slave_tx_disable: SSPTXD is disconnected (in slave mode only)
+ * @clk_freq: Tune freq parameters of SSP(when in master mode)
+ * @endian_rx: Endianess of Data in Rx FIFO
+ * @endian_tx: Endianess of Data in Tx FIFO
+ * @data_size: Width of data element(4 to 32 bits)
+ * @com_mode: communication mode: polling, Interrupt or DMA
+ * @rx_lev_trig: Rx FIFO watermark level (for IT & DMA mode)
+ * @tx_lev_trig: Tx FIFO watermark level (for IT & DMA mode)
+ * @clk_phase: Motorola SPI interface Clock phase
+ * @clk_pol: Motorola SPI interface Clock polarity
+ * @ctrl_len: Microwire interface: Control length
+ * @wait_state: Microwire interface: Wait state
+ * @duplex: Microwire interface: Full/Half duplex
+ * @clkdelay: on the PL023 variant, the delay in feeback clock cycles
+ * before sampling the incoming line
+ * @cs_control: function pointer to board-specific function to
+ * assert/deassert I/O port to control HW generation of devices chip-select.
+ * @dma_xfer_type: Type of DMA xfer (Mem-to-periph or Periph-to-Periph)
+ * @dma_config: DMA configuration for SSP controller and peripheral
+ */
+struct pl022_config_chip {
+	enum ssp_interface iface;
+	enum ssp_hierarchy hierarchy;
+	bool slave_tx_disable;
+	struct ssp_clock_params clk_freq;
+	enum ssp_mode com_mode;
+	enum ssp_rx_level_trig rx_lev_trig;
+	enum ssp_tx_level_trig tx_lev_trig;
+	enum ssp_microwire_ctrl_len ctrl_len;
+	enum ssp_microwire_wait_state wait_state;
+	enum ssp_duplex duplex;
+	enum ssp_clkdelay clkdelay;
+	void (*cs_control) (u32 control);
+};
+
+#endif /* _SSP_PL022_H */
diff --git a/include/linux/amba/pl061.h b/include/linux/amba/pl061.h
new file mode 100644
index 00000000..fb83c045
--- /dev/null
+++ b/include/linux/amba/pl061.h
@@ -0,0 +1,16 @@
+#include <linux/types.h>
+
+/* platform data for the PL061 GPIO driver */
+
+struct pl061_platform_data {
+	/* number of the first GPIO */
+	unsigned	gpio_base;
+
+	/* number of the first IRQ.
+	 * If the IRQ functionality in not desired this must be set to 0.
+	 */
+	unsigned	irq_base;
+
+	u8		directions;	/* startup directions, 1: out, 0: in */
+	u8		values;		/* startup values */
+};
diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h
new file mode 100644
index 00000000..e64ce2cf
--- /dev/null
+++ b/include/linux/amba/pl08x.h
@@ -0,0 +1,244 @@
+/*
+ * linux/amba/pl08x.h - ARM PrimeCell DMA Controller driver
+ *
+ * Copyright (C) 2005 ARM Ltd
+ * Copyright (C) 2010 ST-Ericsson SA
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * pl08x information required by platform code
+ *
+ * Please credit ARM.com
+ * Documentation: ARM DDI 0196D
+ */
+
+#ifndef AMBA_PL08X_H
+#define AMBA_PL08X_H
+
+/* We need sizes of structs from this header */
+#include <linux/dmaengine.h>
+#include <linux/interrupt.h>
+
+struct pl08x_lli;
+struct pl08x_driver_data;
+
+/* Bitmasks for selecting AHB ports for DMA transfers */
+enum {
+	PL08X_AHB1 = (1 << 0),
+	PL08X_AHB2 = (1 << 1)
+};
+
+/**
+ * struct pl08x_channel_data - data structure to pass info between
+ * platform and PL08x driver regarding channel configuration
+ * @bus_id: name of this device channel, not just a device name since
+ * devices may have more than one channel e.g. "foo_tx"
+ * @min_signal: the minimum DMA signal number to be muxed in for this
+ * channel (for platforms supporting muxed signals). If you have
+ * static assignments, make sure this is set to the assigned signal
+ * number, PL08x have 16 possible signals in number 0 thru 15 so
+ * when these are not enough they often get muxed (in hardware)
+ * disabling simultaneous use of the same channel for two devices.
+ * @max_signal: the maximum DMA signal number to be muxed in for
+ * the channel. Set to the same as min_signal for
+ * devices with static assignments
+ * @muxval: a number usually used to poke into some mux regiser to
+ * mux in the signal to this channel
+ * @cctl_opt: default options for the channel control register
+ * @addr: source/target address in physical memory for this DMA channel,
+ * can be the address of a FIFO register for burst requests for example.
+ * This can be left undefined if the PrimeCell API is used for configuring
+ * this.
+ * @circular_buffer: whether the buffer passed in is circular and
+ * shall simply be looped round round (like a record baby round
+ * round round round)
+ * @single: the device connected to this channel will request single DMA
+ * transfers, not bursts. (Bursts are default.)
+ * @periph_buses: the device connected to this channel is accessible via
+ * these buses (use PL08X_AHB1 | PL08X_AHB2).
+ */
+struct pl08x_channel_data {
+	char *bus_id;
+	int min_signal;
+	int max_signal;
+	u32 muxval;
+	u32 cctl;
+	dma_addr_t addr;
+	bool circular_buffer;
+	bool single;
+	u8 periph_buses;
+};
+
+/**
+ * Struct pl08x_bus_data - information of source or destination
+ * busses for a transfer
+ * @addr: current address
+ * @maxwidth: the maximum width of a transfer on this bus
+ * @buswidth: the width of this bus in bytes: 1, 2 or 4
+ */
+struct pl08x_bus_data {
+	dma_addr_t addr;
+	u8 maxwidth;
+	u8 buswidth;
+};
+
+/**
+ * struct pl08x_phy_chan - holder for the physical channels
+ * @id: physical index to this channel
+ * @lock: a lock to use when altering an instance of this struct
+ * @signal: the physical signal (aka channel) serving this physical channel
+ * right now
+ * @serving: the virtual channel currently being served by this physical
+ * channel
+ */
+struct pl08x_phy_chan {
+	unsigned int id;
+	void __iomem *base;
+	spinlock_t lock;
+	int signal;
+	struct pl08x_dma_chan *serving;
+};
+
+/**
+ * struct pl08x_sg - structure containing data per sg
+ * @src_addr: src address of sg
+ * @dst_addr: dst address of sg
+ * @len: transfer len in bytes
+ * @node: node for txd's dsg_list
+ */
+struct pl08x_sg {
+	dma_addr_t src_addr;
+	dma_addr_t dst_addr;
+	size_t len;
+	struct list_head node;
+};
+
+/**
+ * struct pl08x_txd - wrapper for struct dma_async_tx_descriptor
+ * @tx: async tx descriptor
+ * @node: node for txd list for channels
+ * @dsg_list: list of children sg's
+ * @direction: direction of transfer
+ * @llis_bus: DMA memory address (physical) start for the LLIs
+ * @llis_va: virtual memory address start for the LLIs
+ * @cctl: control reg values for current txd
+ * @ccfg: config reg values for current txd
+ */
+struct pl08x_txd {
+	struct dma_async_tx_descriptor tx;
+	struct list_head node;
+	struct list_head dsg_list;
+	enum dma_transfer_direction direction;
+	dma_addr_t llis_bus;
+	struct pl08x_lli *llis_va;
+	/* Default cctl value for LLIs */
+	u32 cctl;
+	/*
+	 * Settings to be put into the physical channel when we
+	 * trigger this txd.  Other registers are in llis_va[0].
+	 */
+	u32 ccfg;
+};
+
+/**
+ * struct pl08x_dma_chan_state - holds the PL08x specific virtual channel
+ * states
+ * @PL08X_CHAN_IDLE: the channel is idle
+ * @PL08X_CHAN_RUNNING: the channel has allocated a physical transport
+ * channel and is running a transfer on it
+ * @PL08X_CHAN_PAUSED: the channel has allocated a physical transport
+ * channel, but the transfer is currently paused
+ * @PL08X_CHAN_WAITING: the channel is waiting for a physical transport
+ * channel to become available (only pertains to memcpy channels)
+ */
+enum pl08x_dma_chan_state {
+	PL08X_CHAN_IDLE,
+	PL08X_CHAN_RUNNING,
+	PL08X_CHAN_PAUSED,
+	PL08X_CHAN_WAITING,
+};
+
+/**
+ * struct pl08x_dma_chan - this structure wraps a DMA ENGINE channel
+ * @chan: wrappped abstract channel
+ * @phychan: the physical channel utilized by this channel, if there is one
+ * @phychan_hold: if non-zero, hold on to the physical channel even if we
+ * have no pending entries
+ * @tasklet: tasklet scheduled by the IRQ to handle actual work etc
+ * @name: name of channel
+ * @cd: channel platform data
+ * @runtime_addr: address for RX/TX according to the runtime config
+ * @runtime_direction: current direction of this channel according to
+ * runtime config
+ * @pend_list: queued transactions pending on this channel
+ * @at: active transaction on this channel
+ * @lock: a lock for this channel data
+ * @host: a pointer to the host (internal use)
+ * @state: whether the channel is idle, paused, running etc
+ * @slave: whether this channel is a device (slave) or for memcpy
+ * @device_fc: Flow Controller Settings for ccfg register. Only valid for slave
+ * channels. Fill with 'true' if peripheral should be flow controller. Direction
+ * will be selected at Runtime.
+ * @waiting: a TX descriptor on this channel which is waiting for a physical
+ * channel to become available
+ */
+struct pl08x_dma_chan {
+	struct dma_chan chan;
+	struct pl08x_phy_chan *phychan;
+	int phychan_hold;
+	struct tasklet_struct tasklet;
+	char *name;
+	const struct pl08x_channel_data *cd;
+	dma_addr_t src_addr;
+	dma_addr_t dst_addr;
+	u32 src_cctl;
+	u32 dst_cctl;
+	enum dma_transfer_direction runtime_direction;
+	struct list_head pend_list;
+	struct pl08x_txd *at;
+	spinlock_t lock;
+	struct pl08x_driver_data *host;
+	enum pl08x_dma_chan_state state;
+	bool slave;
+	bool device_fc;
+	struct pl08x_txd *waiting;
+};
+
+/**
+ * struct pl08x_platform_data - the platform configuration for the PL08x
+ * PrimeCells.
+ * @slave_channels: the channels defined for the different devices on the
+ * platform, all inclusive, including multiplexed channels. The available
+ * physical channels will be multiplexed around these signals as they are
+ * requested, just enumerate all possible channels.
+ * @get_signal: request a physical signal to be used for a DMA transfer
+ * immediately: if there is some multiplexing or similar blocking the use
+ * of the channel the transfer can be denied by returning less than zero,
+ * else it returns the allocated signal number
+ * @put_signal: indicate to the platform that this physical signal is not
+ * running any DMA transfer and multiplexing can be recycled
+ * @lli_buses: buses which LLIs can be fetched from: PL08X_AHB1 | PL08X_AHB2
+ * @mem_buses: buses which memory can be accessed from: PL08X_AHB1 | PL08X_AHB2
+ */
+struct pl08x_platform_data {
+	const struct pl08x_channel_data *slave_channels;
+	unsigned int num_slave_channels;
+	struct pl08x_channel_data memcpy_channel;
+	int (*get_signal)(struct pl08x_dma_chan *);
+	void (*put_signal)(struct pl08x_dma_chan *);
+	u8 lli_buses;
+	u8 mem_buses;
+};
+
+#ifdef CONFIG_AMBA_PL08X
+bool pl08x_filter_id(struct dma_chan *chan, void *chan_id);
+#else
+static inline bool pl08x_filter_id(struct dma_chan *chan, void *chan_id)
+{
+	return false;
+}
+#endif
+
+#endif	/* AMBA_PL08X_H */
diff --git a/include/linux/amba/pl093.h b/include/linux/amba/pl093.h
new file mode 100644
index 00000000..2983e367
--- /dev/null
+++ b/include/linux/amba/pl093.h
@@ -0,0 +1,80 @@
+/* linux/amba/pl093.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * AMBA PL093 SSMC (synchronous static memory controller)
+ *  See DDI0236.pdf (r0p4) for more details
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define SMB_BANK(x)	((x) * 0x20) /* each bank control set is 0x20 apart */
+
+/* Offsets for SMBxxxxRy registers */
+
+#define SMBIDCYR	(0x00)
+#define SMBWSTRDR	(0x04)
+#define SMBWSTWRR	(0x08)
+#define SMBWSTOENR	(0x0C)
+#define SMBWSTWENR	(0x10)
+#define SMBCR		(0x14)
+#define SMBSR		(0x18)
+#define SMBWSTBRDR	(0x1C)
+
+/* Masks for SMB registers */
+#define IDCY_MASK	(0xf)
+#define WSTRD_MASK	(0xf)
+#define WSTWR_MASK	(0xf)
+#define WSTOEN_MASK	(0xf)
+#define WSTWEN_MASK	(0xf)
+
+/* Notes from datasheet:
+ *	WSTOEN <= WSTRD
+ *	WSTWEN <= WSTWR
+ *
+ * WSTOEN is not used with nWAIT
+ */
+
+/* SMBCR bit definitions */
+#define SMBCR_BIWRITEEN		(1 << 21)
+#define SMBCR_ADDRVALIDWRITEEN	(1 << 20)
+#define SMBCR_SYNCWRITE		(1 << 17)
+#define SMBCR_BMWRITE		(1 << 16)
+#define SMBCR_WRAPREAD		(1 << 14)
+#define SMBCR_BIREADEN		(1 << 13)
+#define SMBCR_ADDRVALIDREADEN	(1 << 12)
+#define SMBCR_SYNCREAD		(1 << 9)
+#define SMBCR_BMREAD		(1 << 8)
+#define SMBCR_SMBLSPOL		(1 << 6)
+#define SMBCR_WP		(1 << 3)
+#define SMBCR_WAITEN		(1 << 2)
+#define SMBCR_WAITPOL		(1 << 1)
+#define SMBCR_RBLE		(1 << 0)
+
+#define SMBCR_BURSTLENWRITE_MASK	(3 << 18)
+#define SMBCR_BURSTLENWRITE_4		(0 << 18)
+#define SMBCR_BURSTLENWRITE_8		(1 << 18)
+#define SMBCR_BURSTLENWRITE_RESERVED	(2 << 18)
+#define SMBCR_BURSTLENWRITE_CONTINUOUS	(3 << 18)
+
+#define SMBCR_BURSTLENREAD_MASK		(3 << 10)
+#define SMBCR_BURSTLENREAD_4		(0 << 10)
+#define SMBCR_BURSTLENREAD_8		(1 << 10)
+#define SMBCR_BURSTLENREAD_16		(2 << 10)
+#define SMBCR_BURSTLENREAD_CONTINUOUS	(3 << 10)
+
+#define SMBCR_MW_MASK			(3 << 4)
+#define SMBCR_MW_8BIT			(0 << 4)
+#define SMBCR_MW_16BIT			(1 << 4)
+#define SMBCR_MW_M32BIT			(2 << 4)
+
+/* SSMC status registers */
+#define SSMCCSR		(0x200)
+#define SSMCCR		(0x204)
+#define SSMCITCR	(0x208)
+#define SSMCITIP	(0x20C)
+#define SSMCITIOP	(0x210)
diff --git a/include/linux/amba/pl330.h b/include/linux/amba/pl330.h
new file mode 100644
index 00000000..fe93758e
--- /dev/null
+++ b/include/linux/amba/pl330.h
@@ -0,0 +1,35 @@
+/* linux/include/linux/amba/pl330.h
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef	__AMBA_PL330_H_
+#define	__AMBA_PL330_H_
+
+#include <linux/dmaengine.h>
+
+struct dma_pl330_platdata {
+	/*
+	 * Number of valid peripherals connected to DMAC.
+	 * This may be different from the value read from
+	 * CR0, as the PL330 implementation might have 'holes'
+	 * in the peri list or the peri could also be reached
+	 * from another DMAC which the platform prefers.
+	 */
+	u8 nr_valid_peri;
+	/* Array of valid peripherals */
+	u8 *peri_id;
+	/* Operational capabilities */
+	dma_cap_mask_t cap_mask;
+	/* Bytes to allocate for MC buffer */
+	unsigned mcbuf_sz;
+};
+
+extern bool pl330_filter(struct dma_chan *chan, void *param);
+#endif	/* __AMBA_PL330_H_ */
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
new file mode 100644
index 00000000..d117b29d
--- /dev/null
+++ b/include/linux/amba/serial.h
@@ -0,0 +1,212 @@
+/*
+ *  linux/include/asm-arm/hardware/serial_amba.h
+ *
+ *  Internal header file for AMBA serial ports
+ *
+ *  Copyright (C) ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef ASM_ARM_HARDWARE_SERIAL_AMBA_H
+#define ASM_ARM_HARDWARE_SERIAL_AMBA_H
+
+#include <linux/types.h>
+
+/* -------------------------------------------------------------------------------
+ *  From AMBA UART (PL010) Block Specification
+ * -------------------------------------------------------------------------------
+ *  UART Register Offsets.
+ */
+#define UART01x_DR		0x00	/* Data read or written from the interface. */
+#define UART01x_RSR		0x04	/* Receive status register (Read). */
+#define UART01x_ECR		0x04	/* Error clear register (Write). */
+#define UART010_LCRH		0x08	/* Line control register, high byte. */
+#define ST_UART011_DMAWM	0x08    /* DMA watermark configure register. */
+#define UART010_LCRM		0x0C	/* Line control register, middle byte. */
+#define ST_UART011_TIMEOUT	0x0C    /* Timeout period register. */
+#define UART010_LCRL		0x10	/* Line control register, low byte. */
+#define UART010_CR		0x14	/* Control register. */
+#define UART01x_FR		0x18	/* Flag register (Read only). */
+#define UART010_IIR		0x1C	/* Interrupt indentification register (Read). */
+#define UART010_ICR		0x1C	/* Interrupt clear register (Write). */
+#define ST_UART011_LCRH_RX	0x1C    /* Rx line control register. */
+#define UART01x_ILPR		0x20	/* IrDA low power counter register. */
+#define UART011_IBRD		0x24	/* Integer baud rate divisor register. */
+#define UART011_FBRD		0x28	/* Fractional baud rate divisor register. */
+#define UART011_LCRH		0x2c	/* Line control register. */
+#define ST_UART011_LCRH_TX	0x2c    /* Tx Line control register. */
+#define UART011_CR		0x30	/* Control register. */
+#define UART011_IFLS		0x34	/* Interrupt fifo level select. */
+#define UART011_IMSC		0x38	/* Interrupt mask. */
+#define UART011_RIS		0x3c	/* Raw interrupt status. */
+#define UART011_MIS		0x40	/* Masked interrupt status. */
+#define UART011_ICR		0x44	/* Interrupt clear register. */
+#define UART011_DMACR		0x48	/* DMA control register. */
+#define ST_UART011_XFCR		0x50	/* XON/XOFF control register. */
+#define ST_UART011_XON1		0x54	/* XON1 register. */
+#define ST_UART011_XON2		0x58	/* XON2 register. */
+#define ST_UART011_XOFF1	0x5C	/* XON1 register. */
+#define ST_UART011_XOFF2	0x60	/* XON2 register. */
+#define ST_UART011_ITCR		0x80	/* Integration test control register. */
+#define ST_UART011_ITIP		0x84	/* Integration test input register. */
+#define ST_UART011_ABCR		0x100	/* Autobaud control register. */
+#define ST_UART011_ABIMSC	0x15C	/* Autobaud interrupt mask/clear register. */
+
+#define UART011_DR_OE		(1 << 11)
+#define UART011_DR_BE		(1 << 10)
+#define UART011_DR_PE		(1 << 9)
+#define UART011_DR_FE		(1 << 8)
+
+#define UART01x_RSR_OE 		0x08
+#define UART01x_RSR_BE 		0x04
+#define UART01x_RSR_PE 		0x02
+#define UART01x_RSR_FE 		0x01
+
+#define UART011_FR_RI		0x100
+#define UART011_FR_TXFE		0x080
+#define UART011_FR_RXFF		0x040
+#define UART01x_FR_TXFF		0x020
+#define UART01x_FR_RXFE		0x010
+#define UART01x_FR_BUSY		0x008
+#define UART01x_FR_DCD 		0x004
+#define UART01x_FR_DSR 		0x002
+#define UART01x_FR_CTS 		0x001
+#define UART01x_FR_TMSK		(UART01x_FR_TXFF + UART01x_FR_BUSY)
+
+#define UART011_CR_CTSEN	0x8000	/* CTS hardware flow control */
+#define UART011_CR_RTSEN	0x4000	/* RTS hardware flow control */
+#define UART011_CR_OUT2		0x2000	/* OUT2 */
+#define UART011_CR_OUT1		0x1000	/* OUT1 */
+#define UART011_CR_RTS		0x0800	/* RTS */
+#define UART011_CR_DTR		0x0400	/* DTR */
+#define UART011_CR_RXE		0x0200	/* receive enable */
+#define UART011_CR_TXE		0x0100	/* transmit enable */
+#define UART011_CR_LBE		0x0080	/* loopback enable */
+#define UART010_CR_RTIE		0x0040
+#define UART010_CR_TIE 		0x0020
+#define UART010_CR_RIE 		0x0010
+#define UART010_CR_MSIE		0x0008
+#define ST_UART011_CR_OVSFACT	0x0008	/* Oversampling factor */
+#define UART01x_CR_IIRLP	0x0004	/* SIR low power mode */
+#define UART01x_CR_SIREN	0x0002	/* SIR enable */
+#define UART01x_CR_UARTEN	0x0001	/* UART enable */
+ 
+#define UART011_LCRH_SPS	0x80
+#define UART01x_LCRH_WLEN_8	0x60
+#define UART01x_LCRH_WLEN_7	0x40
+#define UART01x_LCRH_WLEN_6	0x20
+#define UART01x_LCRH_WLEN_5	0x00
+#define UART01x_LCRH_FEN	0x10
+#define UART01x_LCRH_STP2	0x08
+#define UART01x_LCRH_EPS	0x04
+#define UART01x_LCRH_PEN	0x02
+#define UART01x_LCRH_BRK	0x01
+
+#define ST_UART011_DMAWM_RX_1	(0 << 3)
+#define ST_UART011_DMAWM_RX_2	(1 << 3)
+#define ST_UART011_DMAWM_RX_4	(2 << 3)
+#define ST_UART011_DMAWM_RX_8	(3 << 3)
+#define ST_UART011_DMAWM_RX_16	(4 << 3)
+#define ST_UART011_DMAWM_RX_32	(5 << 3)
+#define ST_UART011_DMAWM_RX_48	(6 << 3)
+#define ST_UART011_DMAWM_TX_1	0
+#define ST_UART011_DMAWM_TX_2	1
+#define ST_UART011_DMAWM_TX_4	2
+#define ST_UART011_DMAWM_TX_8	3
+#define ST_UART011_DMAWM_TX_16	4
+#define ST_UART011_DMAWM_TX_32	5
+#define ST_UART011_DMAWM_TX_48	6
+
+#define UART010_IIR_RTIS	0x08
+#define UART010_IIR_TIS		0x04
+#define UART010_IIR_RIS		0x02
+#define UART010_IIR_MIS		0x01
+
+#define UART011_IFLS_RX1_8	(0 << 3)
+#define UART011_IFLS_RX2_8	(1 << 3)
+#define UART011_IFLS_RX4_8	(2 << 3)
+#define UART011_IFLS_RX6_8	(3 << 3)
+#define UART011_IFLS_RX7_8	(4 << 3)
+#define UART011_IFLS_TX1_8	(0 << 0)
+#define UART011_IFLS_TX2_8	(1 << 0)
+#define UART011_IFLS_TX4_8	(2 << 0)
+#define UART011_IFLS_TX6_8	(3 << 0)
+#define UART011_IFLS_TX7_8	(4 << 0)
+/* special values for ST vendor with deeper fifo */
+#define UART011_IFLS_RX_HALF	(5 << 3)
+#define UART011_IFLS_TX_HALF	(5 << 0)
+
+#define UART011_OEIM		(1 << 10)	/* overrun error interrupt mask */
+#define UART011_BEIM		(1 << 9)	/* break error interrupt mask */
+#define UART011_PEIM		(1 << 8)	/* parity error interrupt mask */
+#define UART011_FEIM		(1 << 7)	/* framing error interrupt mask */
+#define UART011_RTIM		(1 << 6)	/* receive timeout interrupt mask */
+#define UART011_TXIM		(1 << 5)	/* transmit interrupt mask */
+#define UART011_RXIM		(1 << 4)	/* receive interrupt mask */
+#define UART011_DSRMIM		(1 << 3)	/* DSR interrupt mask */
+#define UART011_DCDMIM		(1 << 2)	/* DCD interrupt mask */
+#define UART011_CTSMIM		(1 << 1)	/* CTS interrupt mask */
+#define UART011_RIMIM		(1 << 0)	/* RI interrupt mask */
+
+#define UART011_OEIS		(1 << 10)	/* overrun error interrupt status */
+#define UART011_BEIS		(1 << 9)	/* break error interrupt status */
+#define UART011_PEIS		(1 << 8)	/* parity error interrupt status */
+#define UART011_FEIS		(1 << 7)	/* framing error interrupt status */
+#define UART011_RTIS		(1 << 6)	/* receive timeout interrupt status */
+#define UART011_TXIS		(1 << 5)	/* transmit interrupt status */
+#define UART011_RXIS		(1 << 4)	/* receive interrupt status */
+#define UART011_DSRMIS		(1 << 3)	/* DSR interrupt status */
+#define UART011_DCDMIS		(1 << 2)	/* DCD interrupt status */
+#define UART011_CTSMIS		(1 << 1)	/* CTS interrupt status */
+#define UART011_RIMIS		(1 << 0)	/* RI interrupt status */
+
+#define UART011_OEIC		(1 << 10)	/* overrun error interrupt clear */
+#define UART011_BEIC		(1 << 9)	/* break error interrupt clear */
+#define UART011_PEIC		(1 << 8)	/* parity error interrupt clear */
+#define UART011_FEIC		(1 << 7)	/* framing error interrupt clear */
+#define UART011_RTIC		(1 << 6)	/* receive timeout interrupt clear */
+#define UART011_TXIC		(1 << 5)	/* transmit interrupt clear */
+#define UART011_RXIC		(1 << 4)	/* receive interrupt clear */
+#define UART011_DSRMIC		(1 << 3)	/* DSR interrupt clear */
+#define UART011_DCDMIC		(1 << 2)	/* DCD interrupt clear */
+#define UART011_CTSMIC		(1 << 1)	/* CTS interrupt clear */
+#define UART011_RIMIC		(1 << 0)	/* RI interrupt clear */
+
+#define UART011_DMAONERR	(1 << 2)	/* disable dma on error */
+#define UART011_TXDMAE		(1 << 1)	/* enable transmit dma */
+#define UART011_RXDMAE		(1 << 0)	/* enable receive dma */
+
+#define UART01x_RSR_ANY		(UART01x_RSR_OE|UART01x_RSR_BE|UART01x_RSR_PE|UART01x_RSR_FE)
+#define UART01x_FR_MODEM_ANY	(UART01x_FR_DCD|UART01x_FR_DSR|UART01x_FR_CTS)
+
+#ifndef __ASSEMBLY__
+struct amba_device; /* in uncompress this is included but amba/bus.h is not */
+struct amba_pl010_data {
+	void (*set_mctrl)(struct amba_device *dev, void __iomem *base, unsigned int mctrl);
+};
+
+struct dma_chan;
+struct amba_pl011_data {
+	bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
+	void *dma_rx_param;
+	void *dma_tx_param;
+        void (*init) (void);
+	void (*exit) (void);
+	void (*reset) (void);
+};
+#endif
+
+#endif
diff --git a/include/linux/amd-iommu.h b/include/linux/amd-iommu.h
new file mode 100644
index 00000000..15f6b9ed
--- /dev/null
+++ b/include/linux/amd-iommu.h
@@ -0,0 +1,171 @@
+/*
+ * Copyright (C) 2007-2010 Advanced Micro Devices, Inc.
+ * Author: Joerg Roedel <joerg.roedel@amd.com>
+ *         Leo Duran <leo.duran@amd.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _ASM_X86_AMD_IOMMU_H
+#define _ASM_X86_AMD_IOMMU_H
+
+#include <linux/types.h>
+
+#ifdef CONFIG_AMD_IOMMU
+
+struct task_struct;
+struct pci_dev;
+
+extern int amd_iommu_detect(void);
+extern int amd_iommu_init_hardware(void);
+
+/**
+ * amd_iommu_enable_device_erratum() - Enable erratum workaround for device
+ *				       in the IOMMUv2 driver
+ * @pdev: The PCI device the workaround is necessary for
+ * @erratum: The erratum workaround to enable
+ *
+ * The function needs to be called before amd_iommu_init_device().
+ * Possible values for the erratum number are for now:
+ * - AMD_PRI_DEV_ERRATUM_ENABLE_RESET - Reset PRI capability when PRI
+ *					is enabled
+ * - AMD_PRI_DEV_ERRATUM_LIMIT_REQ_ONE - Limit number of outstanding PRI
+ *					 requests to one
+ */
+#define AMD_PRI_DEV_ERRATUM_ENABLE_RESET		0
+#define AMD_PRI_DEV_ERRATUM_LIMIT_REQ_ONE		1
+
+extern void amd_iommu_enable_device_erratum(struct pci_dev *pdev, u32 erratum);
+
+/**
+ * amd_iommu_init_device() - Init device for use with IOMMUv2 driver
+ * @pdev: The PCI device to initialize
+ * @pasids: Number of PASIDs to support for this device
+ *
+ * This function does all setup for the device pdev so that it can be
+ * used with IOMMUv2.
+ * Returns 0 on success or negative value on error.
+ */
+extern int amd_iommu_init_device(struct pci_dev *pdev, int pasids);
+
+/**
+ * amd_iommu_free_device() - Free all IOMMUv2 related device resources
+ *			     and disable IOMMUv2 usage for this device
+ * @pdev: The PCI device to disable IOMMUv2 usage for'
+ */
+extern void amd_iommu_free_device(struct pci_dev *pdev);
+
+/**
+ * amd_iommu_bind_pasid() - Bind a given task to a PASID on a device
+ * @pdev: The PCI device to bind the task to
+ * @pasid: The PASID on the device the task should be bound to
+ * @task: the task to bind
+ *
+ * The function returns 0 on success or a negative value on error.
+ */
+extern int amd_iommu_bind_pasid(struct pci_dev *pdev, int pasid,
+				struct task_struct *task);
+
+/**
+ * amd_iommu_unbind_pasid() - Unbind a PASID from its task on
+ *			      a device
+ * @pdev: The device of the PASID
+ * @pasid: The PASID to unbind
+ *
+ * When this function returns the device is no longer using the PASID
+ * and the PASID is no longer bound to its task.
+ */
+extern void amd_iommu_unbind_pasid(struct pci_dev *pdev, int pasid);
+
+/**
+ * amd_iommu_set_invalid_ppr_cb() - Register a call-back for failed
+ *				    PRI requests
+ * @pdev: The PCI device the call-back should be registered for
+ * @cb: The call-back function
+ *
+ * The IOMMUv2 driver invokes this call-back when it is unable to
+ * successfully handle a PRI request. The device driver can then decide
+ * which PRI response the device should see. Possible return values for
+ * the call-back are:
+ *
+ * - AMD_IOMMU_INV_PRI_RSP_SUCCESS - Send SUCCESS back to the device
+ * - AMD_IOMMU_INV_PRI_RSP_INVALID - Send INVALID back to the device
+ * - AMD_IOMMU_INV_PRI_RSP_FAIL    - Send Failure back to the device,
+ *				     the device is required to disable
+ *				     PRI when it receives this response
+ *
+ * The function returns 0 on success or negative value on error.
+ */
+#define AMD_IOMMU_INV_PRI_RSP_SUCCESS	0
+#define AMD_IOMMU_INV_PRI_RSP_INVALID	1
+#define AMD_IOMMU_INV_PRI_RSP_FAIL	2
+
+typedef int (*amd_iommu_invalid_ppr_cb)(struct pci_dev *pdev,
+					int pasid,
+					unsigned long address,
+					u16);
+
+extern int amd_iommu_set_invalid_ppr_cb(struct pci_dev *pdev,
+					amd_iommu_invalid_ppr_cb cb);
+
+/**
+ * amd_iommu_device_info() - Get information about IOMMUv2 support of a
+ *			     PCI device
+ * @pdev: PCI device to query information from
+ * @info: A pointer to an amd_iommu_device_info structure which will contain
+ *	  the information about the PCI device
+ *
+ * Returns 0 on success, negative value on error
+ */
+
+#define AMD_IOMMU_DEVICE_FLAG_ATS_SUP     0x1    /* ATS feature supported */
+#define AMD_IOMMU_DEVICE_FLAG_PRI_SUP     0x2    /* PRI feature supported */
+#define AMD_IOMMU_DEVICE_FLAG_PASID_SUP   0x4    /* PASID context supported */
+#define AMD_IOMMU_DEVICE_FLAG_EXEC_SUP    0x8    /* Device may request execution
+						    on memory pages */
+#define AMD_IOMMU_DEVICE_FLAG_PRIV_SUP   0x10    /* Device may request
+						    super-user privileges */
+
+struct amd_iommu_device_info {
+	int max_pasids;
+	u32 flags;
+};
+
+extern int amd_iommu_device_info(struct pci_dev *pdev,
+				 struct amd_iommu_device_info *info);
+
+/**
+ * amd_iommu_set_invalidate_ctx_cb() - Register a call-back for invalidating
+ *				       a pasid context. This call-back is
+ *				       invoked when the IOMMUv2 driver needs to
+ *				       invalidate a PASID context, for example
+ *				       because the task that is bound to that
+ *				       context is about to exit.
+ *
+ * @pdev: The PCI device the call-back should be registered for
+ * @cb: The call-back function
+ */
+
+typedef void (*amd_iommu_invalidate_ctx)(struct pci_dev *pdev, int pasid);
+
+extern int amd_iommu_set_invalidate_ctx_cb(struct pci_dev *pdev,
+					   amd_iommu_invalidate_ctx cb);
+
+#else
+
+static inline int amd_iommu_detect(void) { return -ENODEV; }
+
+#endif
+
+#endif /* _ASM_X86_AMD_IOMMU_H */
diff --git a/include/linux/amifd.h b/include/linux/amifd.h
new file mode 100644
index 00000000..34699326
--- /dev/null
+++ b/include/linux/amifd.h
@@ -0,0 +1,62 @@
+#ifndef _AMIFD_H
+#define _AMIFD_H
+
+/* Definitions for the Amiga floppy driver */
+
+#include <linux/fd.h>
+
+#define FD_MAX_UNITS    4	/* Max. Number of drives */
+#define FLOPPY_MAX_SECTORS	22	/* Max. Number of sectors per track */
+
+#ifndef ASSEMBLER
+
+struct fd_data_type {
+    char *name;			/* description of data type */
+    int sects;			/* sectors per track */
+#ifdef __STDC__
+    int (*read_fkt)(int);
+    void (*write_fkt)(int);
+#else
+    int (*read_fkt)();		/* read whole track */
+    void (*write_fkt)();		/* write whole track */
+#endif
+};
+
+/*
+** Floppy type descriptions
+*/
+
+struct fd_drive_type {
+    unsigned long code;		/* code returned from drive */
+    char *name;			/* description of drive */
+    unsigned int tracks;	/* number of tracks */
+    unsigned int heads;		/* number of heads */
+    unsigned int read_size;	/* raw read size for one track */
+    unsigned int write_size;	/* raw write size for one track */
+    unsigned int sect_mult;	/* sectors and gap multiplier (HD = 2) */
+    unsigned int precomp1;	/* start track for precomp 1 */
+    unsigned int precomp2;	/* start track for precomp 2 */
+    unsigned int step_delay;	/* time (in ms) for delay after step */
+    unsigned int settle_time;	/* time to settle after dir change */
+    unsigned int side_time;	/* time needed to change sides */
+};
+
+struct amiga_floppy_struct {
+    struct fd_drive_type *type;	/* type of floppy for this unit */
+    struct fd_data_type *dtype;	/* type of floppy for this unit */
+    int track;			/* current track (-1 == unknown) */
+    unsigned char *trackbuf;    /* current track (kmaloc()'d */
+
+    int blocks;			/* total # blocks on disk */
+
+    int changed;		/* true when not known */
+    int disk;			/* disk in drive (-1 == unknown) */
+    int motor;			/* true when motor is at speed */
+    int busy;			/* true when drive is active */
+    int dirty;			/* true when trackbuf is not on disk */
+    int status;			/* current error code for unit */
+    struct gendisk *gendisk;
+};
+#endif
+
+#endif
diff --git a/include/linux/amifdreg.h b/include/linux/amifdreg.h
new file mode 100644
index 00000000..76188bf4
--- /dev/null
+++ b/include/linux/amifdreg.h
@@ -0,0 +1,81 @@
+#ifndef _LINUX_AMIFDREG_H
+#define _LINUX_AMIFDREG_H
+
+/*
+** CIAAPRA bits (read only)
+*/
+
+#define DSKRDY      (0x1<<5)        /* disk ready when low */
+#define DSKTRACK0   (0x1<<4)        /* head at track zero when low */
+#define DSKPROT     (0x1<<3)        /* disk protected when low */
+#define DSKCHANGE   (0x1<<2)        /* low when disk removed */
+
+/*
+** CIAAPRB bits (read/write)
+*/
+
+#define DSKMOTOR    (0x1<<7)        /* motor on when low */
+#define DSKSEL3     (0x1<<6)        /* select drive 3 when low */
+#define DSKSEL2     (0x1<<5)        /* select drive 2 when low */
+#define DSKSEL1     (0x1<<4)        /* select drive 1 when low */
+#define DSKSEL0     (0x1<<3)        /* select drive 0 when low */
+#define DSKSIDE     (0x1<<2)        /* side selection: 0 = upper, 1 = lower */
+#define DSKDIREC    (0x1<<1)        /* step direction: 0=in, 1=out (to trk 0) */
+#define DSKSTEP     (0x1)           /* pulse low to step head 1 track */
+
+/*
+** DSKBYTR bits (read only)
+*/
+
+#define DSKBYT      (1<<15)         /* register contains valid byte when set */
+#define DMAON       (1<<14)         /* disk DMA enabled */
+#define DISKWRITE   (1<<13)         /* disk write bit in DSKLEN enabled */
+#define WORDEQUAL   (1<<12)         /* DSKSYNC register match when true */
+/* bits 7-0 are data */
+
+/*
+** ADKCON/ADKCONR bits
+*/
+
+#ifndef SETCLR
+#define ADK_SETCLR      (1<<15)     /* control bit */
+#endif
+#define ADK_PRECOMP1    (1<<14)     /* precompensation selection */
+#define ADK_PRECOMP0    (1<<13)     /* 00=none, 01=140ns, 10=280ns, 11=500ns */
+#define ADK_MFMPREC     (1<<12)     /* 0=GCR precomp., 1=MFM precomp. */
+#define ADK_WORDSYNC    (1<<10)     /* enable DSKSYNC auto DMA */
+#define ADK_MSBSYNC     (1<<9)      /* when 1, enable sync on MSbit (for GCR) */
+#define ADK_FAST        (1<<8)      /* bit cell: 0=2us (GCR), 1=1us (MFM) */
+ 
+/*
+** DSKLEN bits
+*/
+
+#define DSKLEN_DMAEN    (1<<15)
+#define DSKLEN_WRITE    (1<<14)
+
+/*
+** INTENA/INTREQ bits
+*/
+
+#define DSKINDEX    (0x1<<4)        /* DSKINDEX bit */
+
+/*
+** Misc
+*/
+ 
+#define MFM_SYNC    0x4489          /* standard MFM sync value */
+
+/* Values for FD_COMMAND */
+#define FD_RECALIBRATE		0x07	/* move to track 0 */
+#define FD_SEEK			0x0F	/* seek track */
+#define FD_READ			0xE6	/* read with MT, MFM, SKip deleted */
+#define FD_WRITE		0xC5	/* write with MT, MFM */
+#define FD_SENSEI		0x08	/* Sense Interrupt Status */
+#define FD_SPECIFY		0x03	/* specify HUT etc */
+#define FD_FORMAT		0x4D	/* format one track */
+#define FD_VERSION		0x10	/* get version code */
+#define FD_CONFIGURE		0x13	/* configure FIFO operation */
+#define FD_PERPENDICULAR	0x12	/* perpendicular r/w mode */
+
+#endif /* _LINUX_AMIFDREG_H */
diff --git a/include/linux/amigaffs.h b/include/linux/amigaffs.h
new file mode 100644
index 00000000..43b41c06
--- /dev/null
+++ b/include/linux/amigaffs.h
@@ -0,0 +1,144 @@
+#ifndef AMIGAFFS_H
+#define AMIGAFFS_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#define FS_OFS		0x444F5300
+#define FS_FFS		0x444F5301
+#define FS_INTLOFS	0x444F5302
+#define FS_INTLFFS	0x444F5303
+#define FS_DCOFS	0x444F5304
+#define FS_DCFFS	0x444F5305
+#define MUFS_FS		0x6d754653   /* 'muFS' */
+#define MUFS_OFS	0x6d754600   /* 'muF\0' */
+#define MUFS_FFS	0x6d754601   /* 'muF\1' */
+#define MUFS_INTLOFS	0x6d754602   /* 'muF\2' */
+#define MUFS_INTLFFS	0x6d754603   /* 'muF\3' */
+#define MUFS_DCOFS	0x6d754604   /* 'muF\4' */
+#define MUFS_DCFFS	0x6d754605   /* 'muF\5' */
+
+#define T_SHORT		2
+#define T_LIST		16
+#define T_DATA		8
+
+#define ST_LINKFILE	-4
+#define ST_FILE		-3
+#define ST_ROOT		1
+#define ST_USERDIR	2
+#define ST_SOFTLINK	3
+#define ST_LINKDIR	4
+
+#define AFFS_ROOT_BMAPS		25
+
+struct affs_date {
+	__be32 days;
+	__be32 mins;
+	__be32 ticks;
+};
+
+struct affs_short_date {
+	__be16 days;
+	__be16 mins;
+	__be16 ticks;
+};
+
+struct affs_root_head {
+	__be32 ptype;
+	__be32 spare1;
+	__be32 spare2;
+	__be32 hash_size;
+	__be32 spare3;
+	__be32 checksum;
+	__be32 hashtable[1];
+};
+
+struct affs_root_tail {
+	__be32 bm_flag;
+	__be32 bm_blk[AFFS_ROOT_BMAPS];
+	__be32 bm_ext;
+	struct affs_date root_change;
+	u8 disk_name[32];
+	__be32 spare1;
+	__be32 spare2;
+	struct affs_date disk_change;
+	struct affs_date disk_create;
+	__be32 spare3;
+	__be32 spare4;
+	__be32 dcache;
+	__be32 stype;
+};
+
+struct affs_head {
+	__be32 ptype;
+	__be32 key;
+	__be32 block_count;
+	__be32 spare1;
+	__be32 first_data;
+	__be32 checksum;
+	__be32 table[1];
+};
+
+struct affs_tail {
+	__be32 spare1;
+	__be16 uid;
+	__be16 gid;
+	__be32 protect;
+	__be32 size;
+	u8 comment[92];
+	struct affs_date change;
+	u8 name[32];
+	__be32 spare2;
+	__be32 original;
+	__be32 link_chain;
+	__be32 spare[5];
+	__be32 hash_chain;
+	__be32 parent;
+	__be32 extension;
+	__be32 stype;
+};
+
+struct slink_front
+{
+	__be32 ptype;
+	__be32 key;
+	__be32 spare1[3];
+	__be32 checksum;
+	u8 symname[1];	/* depends on block size */
+};
+
+struct affs_data_head
+{
+	__be32 ptype;
+	__be32 key;
+	__be32 sequence;
+	__be32 size;
+	__be32 next;
+	__be32 checksum;
+	u8 data[1];	/* depends on block size */
+};
+
+/* Permission bits */
+
+#define FIBF_OTR_READ		0x8000
+#define FIBF_OTR_WRITE		0x4000
+#define FIBF_OTR_EXECUTE	0x2000
+#define FIBF_OTR_DELETE		0x1000
+#define FIBF_GRP_READ		0x0800
+#define FIBF_GRP_WRITE		0x0400
+#define FIBF_GRP_EXECUTE	0x0200
+#define FIBF_GRP_DELETE		0x0100
+
+#define FIBF_HIDDEN		0x0080
+#define FIBF_SCRIPT		0x0040
+#define FIBF_PURE		0x0020		/* no use under linux */
+#define FIBF_ARCHIVED		0x0010		/* never set, always cleared on write */
+#define FIBF_NOREAD		0x0008		/* 0 means allowed */
+#define FIBF_NOWRITE		0x0004		/* 0 means allowed */
+#define FIBF_NOEXECUTE		0x0002		/* 0 means allowed, ignored under linux */
+#define FIBF_NODELETE		0x0001		/* 0 means allowed */
+
+#define FIBF_OWNER		0x000F		/* Bits pertaining to owner */
+#define FIBF_MASK		0xEE0E		/* Bits modified by Linux */
+
+#endif
diff --git a/include/linux/android_aid.h b/include/linux/android_aid.h
new file mode 100644
index 00000000..0f904b3b
--- /dev/null
+++ b/include/linux/android_aid.h
@@ -0,0 +1,28 @@
+/* include/linux/android_aid.h
+ *
+ * Copyright (C) 2008 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _LINUX_ANDROID_AID_H
+#define _LINUX_ANDROID_AID_H
+
+/* AIDs that the kernel treats differently */
+#define AID_NET_BT_ADMIN 3001
+#define AID_NET_BT       3002
+#define AID_INET         3003
+#define AID_NET_RAW      3004
+#define AID_NET_ADMIN    3005
+#define AID_NET_BW_STATS 3006  /* read bandwidth statistics */
+#define AID_NET_BW_ACCT  3007  /* change bandwidth statistics accounting */
+
+#endif
diff --git a/include/linux/anon_inodes.h b/include/linux/anon_inodes.h
new file mode 100644
index 00000000..8013a452
--- /dev/null
+++ b/include/linux/anon_inodes.h
@@ -0,0 +1,20 @@
+/*
+ *  include/linux/anon_inodes.h
+ *
+ *  Copyright (C) 2007  Davide Libenzi <davidel@xmailserver.org>
+ *
+ */
+
+#ifndef _LINUX_ANON_INODES_H
+#define _LINUX_ANON_INODES_H
+
+struct file_operations;
+
+struct file *anon_inode_getfile(const char *name,
+				const struct file_operations *fops,
+				void *priv, int flags);
+int anon_inode_getfd(const char *name, const struct file_operations *fops,
+		     void *priv, int flags);
+
+#endif /* _LINUX_ANON_INODES_H */
+
diff --git a/include/linux/apm-emulation.h b/include/linux/apm-emulation.h
new file mode 100644
index 00000000..e6d80035
--- /dev/null
+++ b/include/linux/apm-emulation.h
@@ -0,0 +1,62 @@
+/* -*- linux-c -*-
+ *
+ * (C) 2003 zecke@handhelds.org
+ *
+ * GPL version 2
+ *
+ * based on arch/arm/kernel/apm.c
+ * factor out the information needed by architectures to provide
+ * apm status
+ */
+#ifndef __LINUX_APM_EMULATION_H
+#define __LINUX_APM_EMULATION_H
+
+#include <linux/apm_bios.h>
+
+/*
+ * This structure gets filled in by the machine specific 'get_power_status'
+ * implementation.  Any fields which are not set default to a safe value.
+ */
+struct apm_power_info {
+	unsigned char	ac_line_status;
+#define APM_AC_OFFLINE			0
+#define APM_AC_ONLINE			1
+#define APM_AC_BACKUP			2
+#define APM_AC_UNKNOWN			0xff
+
+	unsigned char	battery_status;
+#define APM_BATTERY_STATUS_HIGH		0
+#define APM_BATTERY_STATUS_LOW		1
+#define APM_BATTERY_STATUS_CRITICAL	2
+#define APM_BATTERY_STATUS_CHARGING	3
+#define APM_BATTERY_STATUS_NOT_PRESENT	4
+#define APM_BATTERY_STATUS_UNKNOWN	0xff
+
+	unsigned char	battery_flag;
+#define APM_BATTERY_FLAG_HIGH		(1 << 0)
+#define APM_BATTERY_FLAG_LOW		(1 << 1)
+#define APM_BATTERY_FLAG_CRITICAL	(1 << 2)
+#define APM_BATTERY_FLAG_CHARGING	(1 << 3)
+#define APM_BATTERY_FLAG_NOT_PRESENT	(1 << 7)
+#define APM_BATTERY_FLAG_UNKNOWN	0xff
+
+	int		battery_life;
+	int		time;
+	int		units;
+#define APM_UNITS_MINS			0
+#define APM_UNITS_SECS			1
+#define APM_UNITS_UNKNOWN		-1
+
+};
+
+/*
+ * This allows machines to provide their own "apm get power status" function.
+ */
+extern void (*apm_get_power_status)(struct apm_power_info *);
+
+/*
+ * Queue an event (APM_SYS_SUSPEND or APM_CRITICAL_SUSPEND)
+ */
+void apm_queue_event(apm_event_t event);
+
+#endif /* __LINUX_APM_EMULATION_H */
diff --git a/include/linux/apm_bios.h b/include/linux/apm_bios.h
new file mode 100644
index 00000000..01a6244c
--- /dev/null
+++ b/include/linux/apm_bios.h
@@ -0,0 +1,220 @@
+#ifndef _LINUX_APM_H
+#define _LINUX_APM_H
+
+/*
+ * Include file for the interface to an APM BIOS
+ * Copyright 1994-2001 Stephen Rothwell (sfr@canb.auug.org.au)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/types.h>
+
+typedef unsigned short	apm_event_t;
+typedef unsigned short	apm_eventinfo_t;
+
+struct apm_bios_info {
+	__u16	version;
+	__u16	cseg;
+	__u32	offset;
+	__u16	cseg_16;
+	__u16	dseg;
+	__u16	flags;
+	__u16	cseg_len;
+	__u16	cseg_16_len;
+	__u16	dseg_len;
+};
+
+#ifdef __KERNEL__
+
+#define APM_CS		(GDT_ENTRY_APMBIOS_BASE * 8)
+#define APM_CS_16	(APM_CS + 8)
+#define APM_DS		(APM_CS_16 + 8)
+
+/* Results of APM Installation Check */
+#define APM_16_BIT_SUPPORT	0x0001
+#define APM_32_BIT_SUPPORT	0x0002
+#define APM_IDLE_SLOWS_CLOCK	0x0004
+#define APM_BIOS_DISABLED      	0x0008
+#define APM_BIOS_DISENGAGED     0x0010
+
+/*
+ * Data for APM that is persistent across module unload/load
+ */
+struct apm_info {
+	struct apm_bios_info	bios;
+	unsigned short		connection_version;
+	int			get_power_status_broken;
+	int			get_power_status_swabinminutes;
+	int			allow_ints;
+	int			forbid_idle;
+	int			realmode_power_off;
+	int			disabled;
+};
+
+/*
+ * The APM function codes
+ */
+#define	APM_FUNC_INST_CHECK	0x5300
+#define	APM_FUNC_REAL_CONN	0x5301
+#define	APM_FUNC_16BIT_CONN	0x5302
+#define	APM_FUNC_32BIT_CONN	0x5303
+#define	APM_FUNC_DISCONN	0x5304
+#define	APM_FUNC_IDLE		0x5305
+#define	APM_FUNC_BUSY		0x5306
+#define	APM_FUNC_SET_STATE	0x5307
+#define	APM_FUNC_ENABLE_PM	0x5308
+#define	APM_FUNC_RESTORE_BIOS	0x5309
+#define	APM_FUNC_GET_STATUS	0x530a
+#define	APM_FUNC_GET_EVENT	0x530b
+#define	APM_FUNC_GET_STATE	0x530c
+#define	APM_FUNC_ENABLE_DEV_PM	0x530d
+#define	APM_FUNC_VERSION	0x530e
+#define	APM_FUNC_ENGAGE_PM	0x530f
+#define	APM_FUNC_GET_CAP	0x5310
+#define	APM_FUNC_RESUME_TIMER	0x5311
+#define	APM_FUNC_RESUME_ON_RING	0x5312
+#define	APM_FUNC_TIMER		0x5313
+
+/*
+ * Function code for APM_FUNC_RESUME_TIMER
+ */
+#define	APM_FUNC_DISABLE_TIMER	0
+#define	APM_FUNC_GET_TIMER	1
+#define	APM_FUNC_SET_TIMER	2
+
+/*
+ * Function code for APM_FUNC_RESUME_ON_RING
+ */
+#define	APM_FUNC_DISABLE_RING	0
+#define	APM_FUNC_ENABLE_RING	1
+#define	APM_FUNC_GET_RING	2
+
+/*
+ * Function code for APM_FUNC_TIMER_STATUS
+ */
+#define	APM_FUNC_TIMER_DISABLE	0
+#define	APM_FUNC_TIMER_ENABLE	1
+#define	APM_FUNC_TIMER_GET	2
+
+/*
+ * in arch/i386/kernel/setup.c
+ */
+extern struct apm_info	apm_info;
+
+#endif	/* __KERNEL__ */
+
+/*
+ * Power states
+ */
+#define APM_STATE_READY		0x0000
+#define APM_STATE_STANDBY	0x0001
+#define APM_STATE_SUSPEND	0x0002
+#define APM_STATE_OFF		0x0003
+#define APM_STATE_BUSY		0x0004
+#define APM_STATE_REJECT	0x0005
+#define APM_STATE_OEM_SYS	0x0020
+#define APM_STATE_OEM_DEV	0x0040
+
+#define APM_STATE_DISABLE	0x0000
+#define APM_STATE_ENABLE	0x0001
+
+#define APM_STATE_DISENGAGE	0x0000
+#define APM_STATE_ENGAGE	0x0001
+
+/*
+ * Events (results of Get PM Event)
+ */
+#define APM_SYS_STANDBY		0x0001
+#define APM_SYS_SUSPEND		0x0002
+#define APM_NORMAL_RESUME	0x0003
+#define APM_CRITICAL_RESUME	0x0004
+#define APM_LOW_BATTERY		0x0005
+#define APM_POWER_STATUS_CHANGE	0x0006
+#define APM_UPDATE_TIME		0x0007
+#define APM_CRITICAL_SUSPEND	0x0008
+#define APM_USER_STANDBY	0x0009
+#define APM_USER_SUSPEND	0x000a
+#define APM_STANDBY_RESUME	0x000b
+#define APM_CAPABILITY_CHANGE	0x000c
+
+/*
+ * Error codes
+ */
+#define APM_SUCCESS		0x00
+#define APM_DISABLED		0x01
+#define APM_CONNECTED		0x02
+#define APM_NOT_CONNECTED	0x03
+#define APM_16_CONNECTED	0x05
+#define APM_16_UNSUPPORTED	0x06
+#define APM_32_CONNECTED	0x07
+#define APM_32_UNSUPPORTED	0x08
+#define APM_BAD_DEVICE		0x09
+#define APM_BAD_PARAM		0x0a
+#define APM_NOT_ENGAGED		0x0b
+#define APM_BAD_FUNCTION	0x0c
+#define APM_RESUME_DISABLED	0x0d
+#define APM_NO_ERROR		0x53
+#define APM_BAD_STATE		0x60
+#define APM_NO_EVENTS		0x80
+#define APM_NOT_PRESENT		0x86
+
+/*
+ * APM Device IDs
+ */
+#define APM_DEVICE_BIOS		0x0000
+#define APM_DEVICE_ALL		0x0001
+#define APM_DEVICE_DISPLAY	0x0100
+#define APM_DEVICE_STORAGE	0x0200
+#define APM_DEVICE_PARALLEL	0x0300
+#define APM_DEVICE_SERIAL	0x0400
+#define APM_DEVICE_NETWORK	0x0500
+#define APM_DEVICE_PCMCIA	0x0600
+#define APM_DEVICE_BATTERY	0x8000
+#define APM_DEVICE_OEM		0xe000
+#define APM_DEVICE_OLD_ALL	0xffff
+#define APM_DEVICE_CLASS	0x00ff
+#define APM_DEVICE_MASK		0xff00
+
+#ifdef __KERNEL__
+/*
+ * This is the "All Devices" ID communicated to the BIOS
+ */
+#define APM_DEVICE_BALL		((apm_info.connection_version > 0x0100) ? \
+				 APM_DEVICE_ALL : APM_DEVICE_OLD_ALL)
+#endif
+
+/*
+ * Battery status
+ */
+#define APM_MAX_BATTERIES	2
+
+/*
+ * APM defined capability bit flags
+ */
+#define APM_CAP_GLOBAL_STANDBY		0x0001
+#define APM_CAP_GLOBAL_SUSPEND		0x0002
+#define APM_CAP_RESUME_STANDBY_TIMER	0x0004 /* Timer resume from standby */
+#define APM_CAP_RESUME_SUSPEND_TIMER	0x0008 /* Timer resume from suspend */
+#define APM_CAP_RESUME_STANDBY_RING	0x0010 /* Resume on Ring fr standby */
+#define APM_CAP_RESUME_SUSPEND_RING	0x0020 /* Resume on Ring fr suspend */
+#define APM_CAP_RESUME_STANDBY_PCMCIA	0x0040 /* Resume on PCMCIA Ring	*/
+#define APM_CAP_RESUME_SUSPEND_PCMCIA	0x0080 /* Resume on PCMCIA Ring	*/
+
+/*
+ * ioctl operations
+ */
+#include <linux/ioctl.h>
+
+#define APM_IOC_STANDBY		_IO('A', 1)
+#define APM_IOC_SUSPEND		_IO('A', 2)
+
+#endif	/* LINUX_APM_H */
diff --git a/include/linux/apple_bl.h b/include/linux/apple_bl.h
new file mode 100644
index 00000000..47bedc0e
--- /dev/null
+++ b/include/linux/apple_bl.h
@@ -0,0 +1,26 @@
+/*
+ * apple_bl exported symbols
+ */
+
+#ifndef _LINUX_APPLE_BL_H
+#define _LINUX_APPLE_BL_H
+
+#ifdef CONFIG_BACKLIGHT_APPLE
+
+extern int apple_bl_register(void);
+extern void apple_bl_unregister(void);
+
+#else /* !CONFIG_BACKLIGHT_APPLE */
+
+static inline int apple_bl_register(void)
+{
+	return 0;
+}
+
+static inline void apple_bl_unregister(void)
+{
+}
+
+#endif /* !CONFIG_BACKLIGHT_APPLE */
+
+#endif /* _LINUX_APPLE_BL_H */
diff --git a/include/linux/arcdevice.h b/include/linux/arcdevice.h
new file mode 100644
index 00000000..7216b0da
--- /dev/null
+++ b/include/linux/arcdevice.h
@@ -0,0 +1,346 @@
+/*
+ * INET         An implementation of the TCP/IP protocol suite for the LINUX
+ *              operating system.  NET  is implemented using the  BSD Socket
+ *              interface as the means of communication with the user level.
+ *
+ *              Definitions used by the ARCnet driver.
+ *
+ * Authors:     Avery Pennarun and David Woodhouse
+ *
+ *              This program is free software; you can redistribute it and/or
+ *              modify it under the terms of the GNU General Public License
+ *              as published by the Free Software Foundation; either version
+ *              2 of the License, or (at your option) any later version.
+ *
+ */
+#ifndef _LINUX_ARCDEVICE_H
+#define _LINUX_ARCDEVICE_H
+
+#include <asm/timex.h>
+#include <linux/if_arcnet.h>
+
+#ifdef __KERNEL__
+#include  <linux/irqreturn.h>
+
+#ifndef bool
+#define bool int
+#endif
+
+/*
+ * RECON_THRESHOLD is the maximum number of RECON messages to receive
+ * within one minute before printing a "cabling problem" warning. The
+ * default value should be fine.
+ *
+ * After that, a "cabling restored" message will be printed on the next IRQ
+ * if no RECON messages have been received for 10 seconds.
+ *
+ * Do not define RECON_THRESHOLD at all if you want to disable this feature.
+ */
+#define RECON_THRESHOLD 30
+
+
+/*
+ * Define this to the minimum "timeout" value.  If a transmit takes longer
+ * than TX_TIMEOUT jiffies, Linux will abort the TX and retry.  On a large
+ * network, or one with heavy network traffic, this timeout may need to be
+ * increased.  The larger it is, though, the longer it will be between
+ * necessary transmits - don't set this too high.
+ */
+#define TX_TIMEOUT (HZ * 200 / 1000)
+
+
+/* Display warnings about the driver being an ALPHA version. */
+#undef ALPHA_WARNING
+
+
+/*
+ * Debugging bitflags: each option can be enabled individually.
+ * 
+ * Note: only debug flags included in the ARCNET_DEBUG_MAX define will
+ *   actually be available.  GCC will (at least, GCC 2.7.0 will) notice
+ *   lines using a BUGLVL not in ARCNET_DEBUG_MAX and automatically optimize
+ *   them out.
+ */
+#define D_NORMAL	1	/* important operational info             */
+#define D_EXTRA		2	/* useful, but non-vital information      */
+#define	D_INIT		4	/* show init/probe messages               */
+#define D_INIT_REASONS	8	/* show reasons for discarding probes     */
+#define D_RECON		32	/* print a message whenever token is lost */
+#define D_PROTO		64	/* debug auto-protocol support            */
+/* debug levels below give LOTS of output during normal operation! */
+#define D_DURING	128	/* trace operations (including irq's)     */
+#define D_TX	        256	/* show tx packets                        */
+#define D_RX		512	/* show rx packets                        */
+#define D_SKB		1024	/* show skb's                             */
+#define D_SKB_SIZE	2048	/* show skb sizes			  */
+#define D_TIMING	4096	/* show time needed to copy buffers to card */
+#define D_DEBUG         8192    /* Very detailed debug line for line */
+
+#ifndef ARCNET_DEBUG_MAX
+#define ARCNET_DEBUG_MAX (127)	/* change to ~0 if you want detailed debugging */
+#endif
+
+#ifndef ARCNET_DEBUG
+#define ARCNET_DEBUG (D_NORMAL|D_EXTRA)
+#endif
+extern int arcnet_debug;
+
+/* macros to simplify debug checking */
+#define BUGLVL(x) if ((ARCNET_DEBUG_MAX)&arcnet_debug&(x))
+#define BUGMSG2(x,msg,args...) do { BUGLVL(x) printk(msg, ## args); } while (0)
+#define BUGMSG(x,msg,args...) \
+	BUGMSG2(x, "%s%6s: " msg, \
+            x==D_NORMAL	? KERN_WARNING \
+            		: x < D_DURING ? KERN_INFO : KERN_DEBUG, \
+	    dev->name , ## args)
+
+/* see how long a function call takes to run, expressed in CPU cycles */
+#define TIME(name, bytes, call) BUGLVL(D_TIMING) { \
+	    unsigned long _x, _y; \
+	    _x = get_cycles(); \
+	    call; \
+	    _y = get_cycles(); \
+	    BUGMSG(D_TIMING, \
+	       "%s: %d bytes in %lu cycles == " \
+	       "%lu Kbytes/100Mcycle\n",\
+		   name, bytes, _y - _x, \
+		   100000000 / 1024 * bytes / (_y - _x + 1));\
+	} \
+	else { \
+		    call;\
+	}
+
+
+/*
+ * Time needed to reset the card - in ms (milliseconds).  This works on my
+ * SMC PC100.  I can't find a reference that tells me just how long I
+ * should wait.
+ */
+#define RESETtime (300)
+
+/*
+ * These are the max/min lengths of packet payload, not including the
+ * arc_hardware header, but definitely including the soft header.
+ *
+ * Note: packet sizes 254, 255, 256 are impossible because of the way
+ * ARCnet registers work  That's why RFC1201 defines "exception" packets.
+ * In non-RFC1201 protocols, we have to just tack some extra bytes on the
+ * end.
+ */
+#define MTU	253		/* normal packet max size */
+#define MinTU	257		/* extended packet min size */
+#define XMTU	508		/* extended packet max size */
+
+/* status/interrupt mask bit fields */
+#define TXFREEflag	0x01	/* transmitter available */
+#define TXACKflag       0x02	/* transmitted msg. ackd */
+#define RECONflag       0x04	/* network reconfigured */
+#define TESTflag        0x08	/* test flag */
+#define EXCNAKflag      0x08    /* excesive nak flag */
+#define RESETflag       0x10	/* power-on-reset */
+#define RES1flag        0x20	/* reserved - usually set by jumper */
+#define RES2flag        0x40	/* reserved - usually set by jumper */
+#define NORXflag        0x80	/* receiver inhibited */
+
+/* Flags used for IO-mapped memory operations */
+#define AUTOINCflag     0x40	/* Increase location with each access */
+#define IOMAPflag       0x02	/* (for 90xx) Use IO mapped memory, not mmap */
+#define ENABLE16flag    0x80	/* (for 90xx) Enable 16-bit mode */
+
+/* in the command register, the following bits have these meanings:
+ *                0-2     command
+ *                3-4     page number (for enable rcv/xmt command)
+ *                 7      receive broadcasts
+ */
+#define NOTXcmd         0x01	/* disable transmitter */
+#define NORXcmd         0x02	/* disable receiver */
+#define TXcmd           0x03	/* enable transmitter */
+#define RXcmd           0x04	/* enable receiver */
+#define CONFIGcmd       0x05	/* define configuration */
+#define CFLAGScmd       0x06	/* clear flags */
+#define TESTcmd         0x07	/* load test flags */
+
+/* flags for "clear flags" command */
+#define RESETclear      0x08	/* power-on-reset */
+#define CONFIGclear     0x10	/* system reconfigured */
+
+#define EXCNAKclear     0x0E    /* Clear and acknowledge the excive nak bit */
+
+/* flags for "load test flags" command */
+#define TESTload        0x08	/* test flag (diagnostic) */
+
+/* byte deposited into first address of buffers on reset */
+#define TESTvalue       0321	/* that's octal for 0xD1 :) */
+
+/* for "enable receiver" command */
+#define RXbcasts        0x80	/* receive broadcasts */
+
+/* flags for "define configuration" command */
+#define NORMALconf      0x00	/* 1-249 byte packets */
+#define EXTconf         0x08	/* 250-504 byte packets */
+
+/* card feature flags, set during auto-detection.
+ * (currently only used by com20020pci)
+ */
+#define ARC_IS_5MBIT    1   /* card default speed is 5MBit */
+#define ARC_CAN_10MBIT  2   /* card uses COM20022, supporting 10MBit,
+				 but default is 2.5MBit. */
+
+
+/* information needed to define an encapsulation driver */
+struct ArcProto {
+	char suffix;		/* a for RFC1201, e for ether-encap, etc. */
+	int mtu;		/* largest possible packet */
+	int is_ip;              /* This is a ip plugin - not a raw thing */
+
+	void (*rx) (struct net_device * dev, int bufnum,
+		    struct archdr * pkthdr, int length);
+	int (*build_header) (struct sk_buff * skb, struct net_device *dev,
+			     unsigned short ethproto, uint8_t daddr);
+
+	/* these functions return '1' if the skb can now be freed */
+	int (*prepare_tx) (struct net_device * dev, struct archdr * pkt, int length,
+			   int bufnum);
+	int (*continue_tx) (struct net_device * dev, int bufnum);
+	int (*ack_tx) (struct net_device * dev, int acked);
+};
+
+extern struct ArcProto *arc_proto_map[256], *arc_proto_default,
+	*arc_bcast_proto, *arc_raw_proto;
+
+
+/*
+ * "Incoming" is information needed for each address that could be sending
+ * to us.  Mostly for partially-received split packets.
+ */
+struct Incoming {
+	struct sk_buff *skb;	/* packet data buffer             */
+	__be16 sequence;	/* sequence number of assembly    */
+	uint8_t lastpacket,	/* number of last packet (from 1) */
+		numpackets;	/* number of packets in split     */
+};
+
+
+/* only needed for RFC1201 */
+struct Outgoing {
+	struct ArcProto *proto;	/* protocol driver that owns this:
+				 *   if NULL, no packet is pending.
+				 */
+	struct sk_buff *skb;	/* buffer from upper levels */
+	struct archdr *pkt;	/* a pointer into the skb */
+	uint16_t length,	/* bytes total */
+		dataleft,	/* bytes left */
+		segnum,		/* segment being sent */
+		numsegs;	/* number of segments */
+};
+
+
+struct arcnet_local {
+	uint8_t config,		/* current value of CONFIG register */
+		timeout,	/* Extended timeout for COM20020 */
+		backplane,	/* Backplane flag for COM20020 */
+		clockp,		/* COM20020 clock divider */
+		clockm,		/* COM20020 clock multiplier flag */
+		setup,		/* Contents of setup1 register */
+		setup2,		/* Contents of setup2 register */
+		intmask;	/* current value of INTMASK register */
+	uint8_t default_proto[256];	/* default encap to use for each host */
+	int	cur_tx,		/* buffer used by current transmit, or -1 */
+		next_tx,	/* buffer where a packet is ready to send */
+		cur_rx;		/* current receive buffer */
+	int	lastload_dest,	/* can last loaded packet be acked? */
+		lasttrans_dest;	/* can last TX'd packet be acked? */
+	int	timed_out;	/* need to process TX timeout and drop packet */
+	unsigned long last_timeout;	/* time of last reported timeout */
+	char *card_name;	/* card ident string */
+	int card_flags;		/* special card features */
+
+
+	/* On preemtive and SMB a lock is needed */
+	spinlock_t lock;
+
+	/*
+	 * Buffer management: an ARCnet card has 4 x 512-byte buffers, each of
+	 * which can be used for either sending or receiving.  The new dynamic
+	 * buffer management routines use a simple circular queue of available
+	 * buffers, and take them as they're needed.  This way, we simplify
+	 * situations in which we (for example) want to pre-load a transmit
+	 * buffer, or start receiving while we copy a received packet to
+	 * memory.
+	 * 
+	 * The rules: only the interrupt handler is allowed to _add_ buffers to
+	 * the queue; thus, this doesn't require a lock.  Both the interrupt
+	 * handler and the transmit function will want to _remove_ buffers, so
+	 * we need to handle the situation where they try to do it at the same
+	 * time.
+	 * 
+	 * If next_buf == first_free_buf, the queue is empty.  Since there are
+	 * only four possible buffers, the queue should never be full.
+	 */
+	atomic_t buf_lock;
+	int buf_queue[5];
+	int next_buf, first_free_buf;
+
+	/* network "reconfiguration" handling */
+	unsigned long first_recon; /* time of "first" RECON message to count */
+	unsigned long last_recon;  /* time of most recent RECON */
+	int num_recons;		/* number of RECONs between first and last. */
+	bool network_down;	/* do we think the network is down? */
+
+	bool excnak_pending;    /* We just got an excesive nak interrupt */
+
+	struct {
+		uint16_t sequence;	/* sequence number (incs with each packet) */
+		__be16 aborted_seq;
+
+		struct Incoming incoming[256];	/* one from each address */
+	} rfc1201;
+
+	/* really only used by rfc1201, but we'll pretend it's not */
+	struct Outgoing outgoing;	/* packet currently being sent */
+
+	/* hardware-specific functions */
+	struct {
+		struct module *owner;
+		void (*command) (struct net_device * dev, int cmd);
+		int (*status) (struct net_device * dev);
+		void (*intmask) (struct net_device * dev, int mask);
+		bool (*reset) (struct net_device * dev, bool really_reset);
+		void (*open) (struct net_device * dev);
+		void (*close) (struct net_device * dev);
+
+		void (*copy_to_card) (struct net_device * dev, int bufnum, int offset,
+				      void *buf, int count);
+		void (*copy_from_card) (struct net_device * dev, int bufnum, int offset,
+					void *buf, int count);
+	} hw;
+
+	void __iomem *mem_start;	/* pointer to ioremap'ed MMIO */
+};
+
+
+#define ARCRESET(x)  (lp->hw.reset(dev, (x)))
+#define ACOMMAND(x)  (lp->hw.command(dev, (x)))
+#define ASTATUS()    (lp->hw.status(dev))
+#define AINTMASK(x)  (lp->hw.intmask(dev, (x)))
+
+
+
+#if ARCNET_DEBUG_MAX & D_SKB
+void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc);
+#else
+#define arcnet_dump_skb(dev,skb,desc) ;
+#endif
+
+void arcnet_unregister_proto(struct ArcProto *proto);
+irqreturn_t arcnet_interrupt(int irq, void *dev_id);
+struct net_device *alloc_arcdev(const char *name);
+
+int arcnet_open(struct net_device *dev);
+int arcnet_close(struct net_device *dev);
+netdev_tx_t arcnet_send_packet(struct sk_buff *skb,
+				     struct net_device *dev);
+void arcnet_timeout(struct net_device *dev);
+
+#endif				/* __KERNEL__ */
+#endif				/* _LINUX_ARCDEVICE_H */
diff --git a/include/linux/arcfb.h b/include/linux/arcfb.h
new file mode 100644
index 00000000..721e7654
--- /dev/null
+++ b/include/linux/arcfb.h
@@ -0,0 +1,8 @@
+#ifndef __LINUX_ARCFB_H__
+#define __LINUX_ARCFB_H__
+
+#define FBIO_WAITEVENT		_IO('F', 0x88)
+#define FBIO_GETCONTROL2	_IOR('F', 0x89, size_t)
+
+#endif
+
diff --git a/include/linux/async.h b/include/linux/async.h
new file mode 100644
index 00000000..68a95301
--- /dev/null
+++ b/include/linux/async.h
@@ -0,0 +1,27 @@
+/*
+ * async.h: Asynchronous function calls for boot performance
+ *
+ * (C) Copyright 2009 Intel Corporation
+ * Author: Arjan van de Ven <arjan@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/types.h>
+#include <linux/list.h>
+
+typedef u64 async_cookie_t;
+typedef void (async_func_ptr) (void *data, async_cookie_t cookie);
+
+extern async_cookie_t async_schedule(async_func_ptr *ptr, void *data);
+extern async_cookie_t async_schedule_domain(async_func_ptr *ptr, void *data,
+					    struct list_head *list);
+extern void async_synchronize_full(void);
+extern void async_synchronize_full_domain(struct list_head *list);
+extern void async_synchronize_cookie(async_cookie_t cookie);
+extern void async_synchronize_cookie_domain(async_cookie_t cookie,
+					    struct list_head *list);
+
diff --git a/include/linux/async_tx.h b/include/linux/async_tx.h
new file mode 100644
index 00000000..a1c486a8
--- /dev/null
+++ b/include/linux/async_tx.h
@@ -0,0 +1,209 @@
+/*
+ * Copyright © 2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+#ifndef _ASYNC_TX_H_
+#define _ASYNC_TX_H_
+#include <linux/dmaengine.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+
+/* on architectures without dma-mapping capabilities we need to ensure
+ * that the asynchronous path compiles away
+ */
+#ifdef CONFIG_HAS_DMA
+#define __async_inline
+#else
+#define __async_inline __always_inline
+#endif
+
+/**
+ * dma_chan_ref - object used to manage dma channels received from the
+ *   dmaengine core.
+ * @chan - the channel being tracked
+ * @node - node for the channel to be placed on async_tx_master_list
+ * @rcu - for list_del_rcu
+ * @count - number of times this channel is listed in the pool
+ *	(for channels with multiple capabiities)
+ */
+struct dma_chan_ref {
+	struct dma_chan *chan;
+	struct list_head node;
+	struct rcu_head rcu;
+	atomic_t count;
+};
+
+/**
+ * async_tx_flags - modifiers for the async_* calls
+ * @ASYNC_TX_XOR_ZERO_DST: this flag must be used for xor operations where the
+ * the destination address is not a source.  The asynchronous case handles this
+ * implicitly, the synchronous case needs to zero the destination block.
+ * @ASYNC_TX_XOR_DROP_DST: this flag must be used if the destination address is
+ * also one of the source addresses.  In the synchronous case the destination
+ * address is an implied source, whereas the asynchronous case it must be listed
+ * as a source.  The destination address must be the first address in the source
+ * array.
+ * @ASYNC_TX_ACK: immediately ack the descriptor, precludes setting up a
+ * dependency chain
+ * @ASYNC_TX_FENCE: specify that the next operation in the dependency
+ * chain uses this operation's result as an input
+ */
+enum async_tx_flags {
+	ASYNC_TX_XOR_ZERO_DST	 = (1 << 0),
+	ASYNC_TX_XOR_DROP_DST	 = (1 << 1),
+	ASYNC_TX_ACK		 = (1 << 2),
+	ASYNC_TX_FENCE		 = (1 << 3),
+};
+
+/**
+ * struct async_submit_ctl - async_tx submission/completion modifiers
+ * @flags: submission modifiers
+ * @depend_tx: parent dependency of the current operation being submitted
+ * @cb_fn: callback routine to run at operation completion
+ * @cb_param: parameter for the callback routine
+ * @scribble: caller provided space for dma/page address conversions
+ */
+struct async_submit_ctl {
+	enum async_tx_flags flags;
+	struct dma_async_tx_descriptor *depend_tx;
+	dma_async_tx_callback cb_fn;
+	void *cb_param;
+	void *scribble;
+};
+
+#ifdef CONFIG_DMA_ENGINE
+#define async_tx_issue_pending_all dma_issue_pending_all
+
+/**
+ * async_tx_issue_pending - send pending descriptor to the hardware channel
+ * @tx: descriptor handle to retrieve hardware context
+ *
+ * Note: any dependent operations will have already been issued by
+ * async_tx_channel_switch, or (in the case of no channel switch) will
+ * be already pending on this channel.
+ */
+static inline void async_tx_issue_pending(struct dma_async_tx_descriptor *tx)
+{
+	if (likely(tx)) {
+		struct dma_chan *chan = tx->chan;
+		struct dma_device *dma = chan->device;
+
+		dma->device_issue_pending(chan);
+	}
+}
+#ifdef CONFIG_ARCH_HAS_ASYNC_TX_FIND_CHANNEL
+#include <asm/async_tx.h>
+#else
+#define async_tx_find_channel(dep, type, dst, dst_count, src, src_count, len) \
+	 __async_tx_find_channel(dep, type)
+struct dma_chan *
+__async_tx_find_channel(struct async_submit_ctl *submit,
+			enum dma_transaction_type tx_type);
+#endif /* CONFIG_ARCH_HAS_ASYNC_TX_FIND_CHANNEL */
+#else
+static inline void async_tx_issue_pending_all(void)
+{
+	do { } while (0);
+}
+
+static inline void async_tx_issue_pending(struct dma_async_tx_descriptor *tx)
+{
+	do { } while (0);
+}
+
+static inline struct dma_chan *
+async_tx_find_channel(struct async_submit_ctl *submit,
+		      enum dma_transaction_type tx_type, struct page **dst,
+		      int dst_count, struct page **src, int src_count,
+		      size_t len)
+{
+	return NULL;
+}
+#endif
+
+/**
+ * async_tx_sync_epilog - actions to take if an operation is run synchronously
+ * @cb_fn: function to call when the transaction completes
+ * @cb_fn_param: parameter to pass to the callback routine
+ */
+static inline void
+async_tx_sync_epilog(struct async_submit_ctl *submit)
+{
+	if (submit->cb_fn)
+		submit->cb_fn(submit->cb_param);
+}
+
+typedef union {
+	unsigned long addr;
+	struct page *page;
+	dma_addr_t dma;
+} addr_conv_t;
+
+static inline void
+init_async_submit(struct async_submit_ctl *args, enum async_tx_flags flags,
+		  struct dma_async_tx_descriptor *tx,
+		  dma_async_tx_callback cb_fn, void *cb_param,
+		  addr_conv_t *scribble)
+{
+	args->flags = flags;
+	args->depend_tx = tx;
+	args->cb_fn = cb_fn;
+	args->cb_param = cb_param;
+	args->scribble = scribble;
+}
+
+void async_tx_submit(struct dma_chan *chan, struct dma_async_tx_descriptor *tx,
+		     struct async_submit_ctl *submit);
+
+struct dma_async_tx_descriptor *
+async_xor(struct page *dest, struct page **src_list, unsigned int offset,
+	  int src_cnt, size_t len, struct async_submit_ctl *submit);
+
+struct dma_async_tx_descriptor *
+async_xor_val(struct page *dest, struct page **src_list, unsigned int offset,
+	      int src_cnt, size_t len, enum sum_check_flags *result,
+	      struct async_submit_ctl *submit);
+
+struct dma_async_tx_descriptor *
+async_memcpy(struct page *dest, struct page *src, unsigned int dest_offset,
+	     unsigned int src_offset, size_t len,
+	     struct async_submit_ctl *submit);
+
+struct dma_async_tx_descriptor *
+async_memset(struct page *dest, int val, unsigned int offset,
+	     size_t len, struct async_submit_ctl *submit);
+
+struct dma_async_tx_descriptor *async_trigger_callback(struct async_submit_ctl *submit);
+
+struct dma_async_tx_descriptor *
+async_gen_syndrome(struct page **blocks, unsigned int offset, int src_cnt,
+		   size_t len, struct async_submit_ctl *submit);
+
+struct dma_async_tx_descriptor *
+async_syndrome_val(struct page **blocks, unsigned int offset, int src_cnt,
+		   size_t len, enum sum_check_flags *pqres, struct page *spare,
+		   struct async_submit_ctl *submit);
+
+struct dma_async_tx_descriptor *
+async_raid6_2data_recov(int src_num, size_t bytes, int faila, int failb,
+			struct page **ptrs, struct async_submit_ctl *submit);
+
+struct dma_async_tx_descriptor *
+async_raid6_datap_recov(int src_num, size_t bytes, int faila,
+			struct page **ptrs, struct async_submit_ctl *submit);
+
+void async_tx_quiesce(struct dma_async_tx_descriptor **tx);
+#endif /* _ASYNC_TX_H_ */
diff --git a/include/linux/ata.h b/include/linux/ata.h
new file mode 100644
index 00000000..32df2b6e
--- /dev/null
+++ b/include/linux/ata.h
@@ -0,0 +1,1078 @@
+
+/*
+ *  Copyright 2003-2004 Red Hat, Inc.  All rights reserved.
+ *  Copyright 2003-2004 Jeff Garzik
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ *  libata documentation is available via 'make {ps|pdf}docs',
+ *  as Documentation/DocBook/libata.*
+ *
+ *  Hardware documentation available from http://www.t13.org/
+ *
+ */
+
+#ifndef __LINUX_ATA_H__
+#define __LINUX_ATA_H__
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/* defines only for the constants which don't work well as enums */
+#define ATA_DMA_BOUNDARY	0xffffUL
+#define ATA_DMA_MASK		0xffffffffULL
+
+enum {
+	/* various global constants */
+	ATA_MAX_DEVICES		= 2,	/* per bus/port */
+	ATA_MAX_PRD		= 256,	/* we could make these 256/256 */
+	ATA_SECT_SIZE		= 512,
+	ATA_MAX_SECTORS_128	= 128,
+	ATA_MAX_SECTORS		= 256,
+	ATA_MAX_SECTORS_LBA48	= 65535,/* TODO: 65536? */
+	ATA_MAX_SECTORS_TAPE	= 65535,
+
+	ATA_ID_WORDS		= 256,
+	ATA_ID_CONFIG		= 0,
+	ATA_ID_CYLS		= 1,
+	ATA_ID_HEADS		= 3,
+	ATA_ID_SECTORS		= 6,
+	ATA_ID_SERNO		= 10,
+	ATA_ID_BUF_SIZE		= 21,
+	ATA_ID_FW_REV		= 23,
+	ATA_ID_PROD		= 27,
+	ATA_ID_MAX_MULTSECT	= 47,
+	ATA_ID_DWORD_IO		= 48,
+	ATA_ID_CAPABILITY	= 49,
+	ATA_ID_OLD_PIO_MODES	= 51,
+	ATA_ID_OLD_DMA_MODES	= 52,
+	ATA_ID_FIELD_VALID	= 53,
+	ATA_ID_CUR_CYLS		= 54,
+	ATA_ID_CUR_HEADS	= 55,
+	ATA_ID_CUR_SECTORS	= 56,
+	ATA_ID_MULTSECT		= 59,
+	ATA_ID_LBA_CAPACITY	= 60,
+	ATA_ID_SWDMA_MODES	= 62,
+	ATA_ID_MWDMA_MODES	= 63,
+	ATA_ID_PIO_MODES	= 64,
+	ATA_ID_EIDE_DMA_MIN	= 65,
+	ATA_ID_EIDE_DMA_TIME	= 66,
+	ATA_ID_EIDE_PIO		= 67,
+	ATA_ID_EIDE_PIO_IORDY	= 68,
+	ATA_ID_ADDITIONAL_SUPP	= 69,
+	ATA_ID_QUEUE_DEPTH	= 75,
+	ATA_ID_MAJOR_VER	= 80,
+	ATA_ID_COMMAND_SET_1	= 82,
+	ATA_ID_COMMAND_SET_2	= 83,
+	ATA_ID_CFSSE		= 84,
+	ATA_ID_CFS_ENABLE_1	= 85,
+	ATA_ID_CFS_ENABLE_2	= 86,
+	ATA_ID_CSF_DEFAULT	= 87,
+	ATA_ID_UDMA_MODES	= 88,
+	ATA_ID_HW_CONFIG	= 93,
+	ATA_ID_SPG		= 98,
+	ATA_ID_LBA_CAPACITY_2	= 100,
+	ATA_ID_SECTOR_SIZE	= 106,
+	ATA_ID_WWN		= 108,
+	ATA_ID_LOGICAL_SECTOR_SIZE	= 117,	/* and 118 */
+	ATA_ID_LAST_LUN		= 126,
+	ATA_ID_DLF		= 128,
+	ATA_ID_CSFO		= 129,
+	ATA_ID_CFA_POWER	= 160,
+	ATA_ID_CFA_KEY_MGMT	= 162,
+	ATA_ID_CFA_MODES	= 163,
+	ATA_ID_DATA_SET_MGMT	= 169,
+	ATA_ID_ROT_SPEED	= 217,
+	ATA_ID_PIO4		= (1 << 1),
+
+	ATA_ID_SERNO_LEN	= 20,
+	ATA_ID_FW_REV_LEN	= 8,
+	ATA_ID_PROD_LEN		= 40,
+	ATA_ID_WWN_LEN		= 8,
+
+	ATA_PCI_CTL_OFS		= 2,
+
+	ATA_PIO0		= (1 << 0),
+	ATA_PIO1		= ATA_PIO0 | (1 << 1),
+	ATA_PIO2		= ATA_PIO1 | (1 << 2),
+	ATA_PIO3		= ATA_PIO2 | (1 << 3),
+	ATA_PIO4		= ATA_PIO3 | (1 << 4),
+	ATA_PIO5		= ATA_PIO4 | (1 << 5),
+	ATA_PIO6		= ATA_PIO5 | (1 << 6),
+
+	ATA_PIO4_ONLY		= (1 << 4),
+
+	ATA_SWDMA0		= (1 << 0),
+	ATA_SWDMA1		= ATA_SWDMA0 | (1 << 1),
+	ATA_SWDMA2		= ATA_SWDMA1 | (1 << 2),
+
+	ATA_SWDMA2_ONLY		= (1 << 2),
+
+	ATA_MWDMA0		= (1 << 0),
+	ATA_MWDMA1		= ATA_MWDMA0 | (1 << 1),
+	ATA_MWDMA2		= ATA_MWDMA1 | (1 << 2),
+	ATA_MWDMA3		= ATA_MWDMA2 | (1 << 3),
+	ATA_MWDMA4		= ATA_MWDMA3 | (1 << 4),
+
+	ATA_MWDMA12_ONLY	= (1 << 1) | (1 << 2),
+	ATA_MWDMA2_ONLY		= (1 << 2),
+
+	ATA_UDMA0		= (1 << 0),
+	ATA_UDMA1		= ATA_UDMA0 | (1 << 1),
+	ATA_UDMA2		= ATA_UDMA1 | (1 << 2),
+	ATA_UDMA3		= ATA_UDMA2 | (1 << 3),
+	ATA_UDMA4		= ATA_UDMA3 | (1 << 4),
+	ATA_UDMA5		= ATA_UDMA4 | (1 << 5),
+	ATA_UDMA6		= ATA_UDMA5 | (1 << 6),
+	ATA_UDMA7		= ATA_UDMA6 | (1 << 7),
+	/* ATA_UDMA7 is just for completeness... doesn't exist (yet?).  */
+
+	ATA_UDMA24_ONLY		= (1 << 2) | (1 << 4),
+
+	ATA_UDMA_MASK_40C	= ATA_UDMA2,	/* udma0-2 */
+
+	/* DMA-related */
+	ATA_PRD_SZ		= 8,
+	ATA_PRD_TBL_SZ		= (ATA_MAX_PRD * ATA_PRD_SZ),
+	ATA_PRD_EOT		= (1 << 31),	/* end-of-table flag */
+
+	ATA_DMA_TABLE_OFS	= 4,
+	ATA_DMA_STATUS		= 2,
+	ATA_DMA_CMD		= 0,
+	ATA_DMA_WR		= (1 << 3),
+	ATA_DMA_START		= (1 << 0),
+	ATA_DMA_INTR		= (1 << 2),
+	ATA_DMA_ERR		= (1 << 1),
+	ATA_DMA_ACTIVE		= (1 << 0),
+
+	/* bits in ATA command block registers */
+	ATA_HOB			= (1 << 7),	/* LBA48 selector */
+	ATA_NIEN		= (1 << 1),	/* disable-irq flag */
+	ATA_LBA			= (1 << 6),	/* LBA28 selector */
+	ATA_DEV1		= (1 << 4),	/* Select Device 1 (slave) */
+	ATA_DEVICE_OBS		= (1 << 7) | (1 << 5), /* obs bits in dev reg */
+	ATA_DEVCTL_OBS		= (1 << 3),	/* obsolete bit in devctl reg */
+	ATA_BUSY		= (1 << 7),	/* BSY status bit */
+	ATA_DRDY		= (1 << 6),	/* device ready */
+	ATA_DF			= (1 << 5),	/* device fault */
+	ATA_DSC			= (1 << 4),	/* drive seek complete */
+	ATA_DRQ			= (1 << 3),	/* data request i/o */
+	ATA_CORR		= (1 << 2),	/* corrected data error */
+	ATA_IDX			= (1 << 1),	/* index */
+	ATA_ERR			= (1 << 0),	/* have an error */
+	ATA_SRST		= (1 << 2),	/* software reset */
+	ATA_ICRC		= (1 << 7),	/* interface CRC error */
+	ATA_BBK			= ATA_ICRC,	/* pre-EIDE: block marked bad */
+	ATA_UNC			= (1 << 6),	/* uncorrectable media error */
+	ATA_MC			= (1 << 5),	/* media changed */
+	ATA_IDNF		= (1 << 4),	/* ID not found */
+	ATA_MCR			= (1 << 3),	/* media change requested */
+	ATA_ABORTED		= (1 << 2),	/* command aborted */
+	ATA_TRK0NF		= (1 << 1),	/* track 0 not found */
+	ATA_AMNF		= (1 << 0),	/* address mark not found */
+	ATAPI_LFS		= 0xF0,		/* last failed sense */
+	ATAPI_EOM		= ATA_TRK0NF,	/* end of media */
+	ATAPI_ILI		= ATA_AMNF,	/* illegal length indication */
+	ATAPI_IO		= (1 << 1),
+	ATAPI_COD		= (1 << 0),
+
+	/* ATA command block registers */
+	ATA_REG_DATA		= 0x00,
+	ATA_REG_ERR		= 0x01,
+	ATA_REG_NSECT		= 0x02,
+	ATA_REG_LBAL		= 0x03,
+	ATA_REG_LBAM		= 0x04,
+	ATA_REG_LBAH		= 0x05,
+	ATA_REG_DEVICE		= 0x06,
+	ATA_REG_STATUS		= 0x07,
+
+	ATA_REG_FEATURE		= ATA_REG_ERR, /* and their aliases */
+	ATA_REG_CMD		= ATA_REG_STATUS,
+	ATA_REG_BYTEL		= ATA_REG_LBAM,
+	ATA_REG_BYTEH		= ATA_REG_LBAH,
+	ATA_REG_DEVSEL		= ATA_REG_DEVICE,
+	ATA_REG_IRQ		= ATA_REG_NSECT,
+
+	/* ATA device commands */
+	ATA_CMD_DEV_RESET	= 0x08, /* ATAPI device reset */
+	ATA_CMD_CHK_POWER	= 0xE5, /* check power mode */
+	ATA_CMD_STANDBY		= 0xE2, /* place in standby power mode */
+	ATA_CMD_IDLE		= 0xE3, /* place in idle power mode */
+	ATA_CMD_EDD		= 0x90,	/* execute device diagnostic */
+	ATA_CMD_DOWNLOAD_MICRO  = 0x92,
+	ATA_CMD_NOP		= 0x00,
+	ATA_CMD_FLUSH		= 0xE7,
+	ATA_CMD_FLUSH_EXT	= 0xEA,
+	ATA_CMD_ID_ATA		= 0xEC,
+	ATA_CMD_ID_ATAPI	= 0xA1,
+	ATA_CMD_SERVICE		= 0xA2,
+	ATA_CMD_READ		= 0xC8,
+	ATA_CMD_READ_EXT	= 0x25,
+	ATA_CMD_READ_QUEUED	= 0x26,
+	ATA_CMD_READ_STREAM_EXT	= 0x2B,
+	ATA_CMD_READ_STREAM_DMA_EXT = 0x2A,
+	ATA_CMD_WRITE		= 0xCA,
+	ATA_CMD_WRITE_EXT	= 0x35,
+	ATA_CMD_WRITE_QUEUED	= 0x36,
+	ATA_CMD_WRITE_STREAM_EXT = 0x3B,
+	ATA_CMD_WRITE_STREAM_DMA_EXT = 0x3A,
+	ATA_CMD_WRITE_FUA_EXT	= 0x3D,
+	ATA_CMD_WRITE_QUEUED_FUA_EXT = 0x3E,
+	ATA_CMD_FPDMA_READ	= 0x60,
+	ATA_CMD_FPDMA_WRITE	= 0x61,
+	ATA_CMD_PIO_READ	= 0x20,
+	ATA_CMD_PIO_READ_EXT	= 0x24,
+	ATA_CMD_PIO_WRITE	= 0x30,
+	ATA_CMD_PIO_WRITE_EXT	= 0x34,
+	ATA_CMD_READ_MULTI	= 0xC4,
+	ATA_CMD_READ_MULTI_EXT	= 0x29,
+	ATA_CMD_WRITE_MULTI	= 0xC5,
+	ATA_CMD_WRITE_MULTI_EXT	= 0x39,
+	ATA_CMD_WRITE_MULTI_FUA_EXT = 0xCE,
+	ATA_CMD_SET_FEATURES	= 0xEF,
+	ATA_CMD_SET_MULTI	= 0xC6,
+	ATA_CMD_PACKET		= 0xA0,
+	ATA_CMD_VERIFY		= 0x40,
+	ATA_CMD_VERIFY_EXT	= 0x42,
+	ATA_CMD_WRITE_UNCORR_EXT = 0x45,
+	ATA_CMD_STANDBYNOW1	= 0xE0,
+	ATA_CMD_IDLEIMMEDIATE	= 0xE1,
+	ATA_CMD_SLEEP		= 0xE6,
+	ATA_CMD_INIT_DEV_PARAMS	= 0x91,
+	ATA_CMD_READ_NATIVE_MAX	= 0xF8,
+	ATA_CMD_READ_NATIVE_MAX_EXT = 0x27,
+	ATA_CMD_SET_MAX		= 0xF9,
+	ATA_CMD_SET_MAX_EXT	= 0x37,
+	ATA_CMD_READ_LOG_EXT	= 0x2F,
+	ATA_CMD_WRITE_LOG_EXT	= 0x3F,
+	ATA_CMD_READ_LOG_DMA_EXT = 0x47,
+	ATA_CMD_WRITE_LOG_DMA_EXT = 0x57,
+	ATA_CMD_TRUSTED_RCV	= 0x5C,
+	ATA_CMD_TRUSTED_RCV_DMA = 0x5D,
+	ATA_CMD_TRUSTED_SND	= 0x5E,
+	ATA_CMD_TRUSTED_SND_DMA = 0x5F,
+	ATA_CMD_PMP_READ	= 0xE4,
+	ATA_CMD_PMP_WRITE	= 0xE8,
+	ATA_CMD_CONF_OVERLAY	= 0xB1,
+	ATA_CMD_SEC_SET_PASS	= 0xF1,
+	ATA_CMD_SEC_UNLOCK	= 0xF2,
+	ATA_CMD_SEC_ERASE_PREP	= 0xF3,
+	ATA_CMD_SEC_ERASE_UNIT	= 0xF4,
+	ATA_CMD_SEC_FREEZE_LOCK	= 0xF5,
+	ATA_CMD_SEC_DISABLE_PASS = 0xF6,
+	ATA_CMD_CONFIG_STREAM	= 0x51,
+	ATA_CMD_SMART		= 0xB0,
+	ATA_CMD_MEDIA_LOCK	= 0xDE,
+	ATA_CMD_MEDIA_UNLOCK	= 0xDF,
+	ATA_CMD_DSM		= 0x06,
+	ATA_CMD_CHK_MED_CRD_TYP = 0xD1,
+	ATA_CMD_CFA_REQ_EXT_ERR = 0x03,
+	ATA_CMD_CFA_WRITE_NE	= 0x38,
+	ATA_CMD_CFA_TRANS_SECT	= 0x87,
+	ATA_CMD_CFA_ERASE	= 0xC0,
+	ATA_CMD_CFA_WRITE_MULT_NE = 0xCD,
+	/* marked obsolete in the ATA/ATAPI-7 spec */
+	ATA_CMD_RESTORE		= 0x10,
+
+	/* READ_LOG_EXT pages */
+	ATA_LOG_SATA_NCQ	= 0x10,
+
+	/* READ/WRITE LONG (obsolete) */
+	ATA_CMD_READ_LONG	= 0x22,
+	ATA_CMD_READ_LONG_ONCE	= 0x23,
+	ATA_CMD_WRITE_LONG	= 0x32,
+	ATA_CMD_WRITE_LONG_ONCE	= 0x33,
+
+	/* SETFEATURES stuff */
+	SETFEATURES_XFER	= 0x03,
+	XFER_UDMA_7		= 0x47,
+	XFER_UDMA_6		= 0x46,
+	XFER_UDMA_5		= 0x45,
+	XFER_UDMA_4		= 0x44,
+	XFER_UDMA_3		= 0x43,
+	XFER_UDMA_2		= 0x42,
+	XFER_UDMA_1		= 0x41,
+	XFER_UDMA_0		= 0x40,
+	XFER_MW_DMA_4		= 0x24,	/* CFA only */
+	XFER_MW_DMA_3		= 0x23,	/* CFA only */
+	XFER_MW_DMA_2		= 0x22,
+	XFER_MW_DMA_1		= 0x21,
+	XFER_MW_DMA_0		= 0x20,
+	XFER_SW_DMA_2		= 0x12,
+	XFER_SW_DMA_1		= 0x11,
+	XFER_SW_DMA_0		= 0x10,
+	XFER_PIO_6		= 0x0E,	/* CFA only */
+	XFER_PIO_5		= 0x0D,	/* CFA only */
+	XFER_PIO_4		= 0x0C,
+	XFER_PIO_3		= 0x0B,
+	XFER_PIO_2		= 0x0A,
+	XFER_PIO_1		= 0x09,
+	XFER_PIO_0		= 0x08,
+	XFER_PIO_SLOW		= 0x00,
+
+	SETFEATURES_WC_ON	= 0x02, /* Enable write cache */
+	SETFEATURES_WC_OFF	= 0x82, /* Disable write cache */
+
+	/* Enable/Disable Automatic Acoustic Management */
+	SETFEATURES_AAM_ON	= 0x42,
+	SETFEATURES_AAM_OFF	= 0xC2,
+
+	SETFEATURES_SPINUP	= 0x07, /* Spin-up drive */
+
+	SETFEATURES_SATA_ENABLE = 0x10, /* Enable use of SATA feature */
+	SETFEATURES_SATA_DISABLE = 0x90, /* Disable use of SATA feature */
+
+	/* SETFEATURE Sector counts for SATA features */
+	SATA_FPDMA_OFFSET	= 0x01,	/* FPDMA non-zero buffer offsets */
+	SATA_FPDMA_AA		= 0x02, /* FPDMA Setup FIS Auto-Activate */
+	SATA_DIPM		= 0x03,	/* Device Initiated Power Management */
+	SATA_FPDMA_IN_ORDER	= 0x04,	/* FPDMA in-order data delivery */
+	SATA_AN			= 0x05,	/* Asynchronous Notification */
+	SATA_SSP		= 0x06,	/* Software Settings Preservation */
+
+	/* feature values for SET_MAX */
+	ATA_SET_MAX_ADDR	= 0x00,
+	ATA_SET_MAX_PASSWD	= 0x01,
+	ATA_SET_MAX_LOCK	= 0x02,
+	ATA_SET_MAX_UNLOCK	= 0x03,
+	ATA_SET_MAX_FREEZE_LOCK	= 0x04,
+
+	/* feature values for DEVICE CONFIGURATION OVERLAY */
+	ATA_DCO_RESTORE		= 0xC0,
+	ATA_DCO_FREEZE_LOCK	= 0xC1,
+	ATA_DCO_IDENTIFY	= 0xC2,
+	ATA_DCO_SET		= 0xC3,
+
+	/* feature values for SMART */
+	ATA_SMART_ENABLE	= 0xD8,
+	ATA_SMART_READ_VALUES	= 0xD0,
+	ATA_SMART_READ_THRESHOLDS = 0xD1,
+
+	/* feature values for Data Set Management */
+	ATA_DSM_TRIM		= 0x01,
+
+	/* password used in LBA Mid / LBA High for executing SMART commands */
+	ATA_SMART_LBAM_PASS	= 0x4F,
+	ATA_SMART_LBAH_PASS	= 0xC2,
+
+	/* ATAPI stuff */
+	ATAPI_PKT_DMA		= (1 << 0),
+	ATAPI_DMADIR		= (1 << 2),	/* ATAPI data dir:
+						   0=to device, 1=to host */
+	ATAPI_CDB_LEN		= 16,
+
+	/* PMP stuff */
+	SATA_PMP_MAX_PORTS	= 15,
+	SATA_PMP_CTRL_PORT	= 15,
+
+	SATA_PMP_GSCR_DWORDS	= 128,
+	SATA_PMP_GSCR_PROD_ID	= 0,
+	SATA_PMP_GSCR_REV	= 1,
+	SATA_PMP_GSCR_PORT_INFO	= 2,
+	SATA_PMP_GSCR_ERROR	= 32,
+	SATA_PMP_GSCR_ERROR_EN	= 33,
+	SATA_PMP_GSCR_FEAT	= 64,
+	SATA_PMP_GSCR_FEAT_EN	= 96,
+
+	SATA_PMP_PSCR_STATUS	= 0,
+	SATA_PMP_PSCR_ERROR	= 1,
+	SATA_PMP_PSCR_CONTROL	= 2,
+
+	SATA_PMP_FEAT_BIST	= (1 << 0),
+	SATA_PMP_FEAT_PMREQ	= (1 << 1),
+	SATA_PMP_FEAT_DYNSSC	= (1 << 2),
+	SATA_PMP_FEAT_NOTIFY	= (1 << 3),
+
+	/* cable types */
+	ATA_CBL_NONE		= 0,
+	ATA_CBL_PATA40		= 1,
+	ATA_CBL_PATA80		= 2,
+	ATA_CBL_PATA40_SHORT	= 3,	/* 40 wire cable to high UDMA spec */
+	ATA_CBL_PATA_UNK	= 4,	/* don't know, maybe 80c? */
+	ATA_CBL_PATA_IGN	= 5,	/* don't know, ignore cable handling */
+	ATA_CBL_SATA		= 6,
+
+	/* SATA Status and Control Registers */
+	SCR_STATUS		= 0,
+	SCR_ERROR		= 1,
+	SCR_CONTROL		= 2,
+	SCR_ACTIVE		= 3,
+	SCR_NOTIFICATION	= 4,
+
+	/* SError bits */
+	SERR_DATA_RECOVERED	= (1 << 0), /* recovered data error */
+	SERR_COMM_RECOVERED	= (1 << 1), /* recovered comm failure */
+	SERR_DATA		= (1 << 8), /* unrecovered data error */
+	SERR_PERSISTENT		= (1 << 9), /* persistent data/comm error */
+	SERR_PROTOCOL		= (1 << 10), /* protocol violation */
+	SERR_INTERNAL		= (1 << 11), /* host internal error */
+	SERR_PHYRDY_CHG		= (1 << 16), /* PHY RDY changed */
+	SERR_PHY_INT_ERR	= (1 << 17), /* PHY internal error */
+	SERR_COMM_WAKE		= (1 << 18), /* Comm wake */
+	SERR_10B_8B_ERR		= (1 << 19), /* 10b to 8b decode error */
+	SERR_DISPARITY		= (1 << 20), /* Disparity */
+	SERR_CRC		= (1 << 21), /* CRC error */
+	SERR_HANDSHAKE		= (1 << 22), /* Handshake error */
+	SERR_LINK_SEQ_ERR	= (1 << 23), /* Link sequence error */
+	SERR_TRANS_ST_ERROR	= (1 << 24), /* Transport state trans. error */
+	SERR_UNRECOG_FIS	= (1 << 25), /* Unrecognized FIS */
+	SERR_DEV_XCHG		= (1 << 26), /* device exchanged */
+
+	/* struct ata_taskfile flags */
+	ATA_TFLAG_LBA48		= (1 << 0), /* enable 48-bit LBA and "HOB" */
+	ATA_TFLAG_ISADDR	= (1 << 1), /* enable r/w to nsect/lba regs */
+	ATA_TFLAG_DEVICE	= (1 << 2), /* enable r/w to device reg */
+	ATA_TFLAG_WRITE		= (1 << 3), /* data dir: host->dev==1 (write) */
+	ATA_TFLAG_LBA		= (1 << 4), /* enable LBA */
+	ATA_TFLAG_FUA		= (1 << 5), /* enable FUA */
+	ATA_TFLAG_POLLING	= (1 << 6), /* set nIEN to 1 and use polling */
+
+	/* protocol flags */
+	ATA_PROT_FLAG_PIO	= (1 << 0), /* is PIO */
+	ATA_PROT_FLAG_DMA	= (1 << 1), /* is DMA */
+	ATA_PROT_FLAG_DATA	= ATA_PROT_FLAG_PIO | ATA_PROT_FLAG_DMA,
+	ATA_PROT_FLAG_NCQ	= (1 << 2), /* is NCQ */
+	ATA_PROT_FLAG_ATAPI	= (1 << 3), /* is ATAPI */
+};
+
+enum ata_tf_protocols {
+	/* ATA taskfile protocols */
+	ATA_PROT_UNKNOWN,	/* unknown/invalid */
+	ATA_PROT_NODATA,	/* no data */
+	ATA_PROT_PIO,		/* PIO data xfer */
+	ATA_PROT_DMA,		/* DMA */
+	ATA_PROT_NCQ,		/* NCQ */
+	ATAPI_PROT_NODATA,	/* packet command, no data */
+	ATAPI_PROT_PIO,		/* packet command, PIO data xfer*/
+	ATAPI_PROT_DMA,		/* packet command with special DMA sauce */
+};
+
+enum ata_ioctls {
+	ATA_IOC_GET_IO32	= 0x309,
+	ATA_IOC_SET_IO32	= 0x324,
+};
+
+/* core structures */
+
+struct ata_bmdma_prd {
+	__le32			addr;
+	__le32			flags_len;
+};
+
+struct ata_taskfile {
+	unsigned long		flags;		/* ATA_TFLAG_xxx */
+	u8			protocol;	/* ATA_PROT_xxx */
+
+	u8			ctl;		/* control reg */
+
+	u8			hob_feature;	/* additional data */
+	u8			hob_nsect;	/* to support LBA48 */
+	u8			hob_lbal;
+	u8			hob_lbam;
+	u8			hob_lbah;
+
+	u8			feature;
+	u8			nsect;
+	u8			lbal;
+	u8			lbam;
+	u8			lbah;
+
+	u8			device;
+
+	u8			command;	/* IO operation */
+};
+
+/*
+ * protocol tests
+ */
+static inline unsigned int ata_prot_flags(u8 prot)
+{
+	switch (prot) {
+	case ATA_PROT_NODATA:
+		return 0;
+	case ATA_PROT_PIO:
+		return ATA_PROT_FLAG_PIO;
+	case ATA_PROT_DMA:
+		return ATA_PROT_FLAG_DMA;
+	case ATA_PROT_NCQ:
+		return ATA_PROT_FLAG_DMA | ATA_PROT_FLAG_NCQ;
+	case ATAPI_PROT_NODATA:
+		return ATA_PROT_FLAG_ATAPI;
+	case ATAPI_PROT_PIO:
+		return ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_PIO;
+	case ATAPI_PROT_DMA:
+		return ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_DMA;
+	}
+	return 0;
+}
+
+static inline int ata_is_atapi(u8 prot)
+{
+	return ata_prot_flags(prot) & ATA_PROT_FLAG_ATAPI;
+}
+
+static inline int ata_is_nodata(u8 prot)
+{
+	return !(ata_prot_flags(prot) & ATA_PROT_FLAG_DATA);
+}
+
+static inline int ata_is_pio(u8 prot)
+{
+	return ata_prot_flags(prot) & ATA_PROT_FLAG_PIO;
+}
+
+static inline int ata_is_dma(u8 prot)
+{
+	return ata_prot_flags(prot) & ATA_PROT_FLAG_DMA;
+}
+
+static inline int ata_is_ncq(u8 prot)
+{
+	return ata_prot_flags(prot) & ATA_PROT_FLAG_NCQ;
+}
+
+static inline int ata_is_data(u8 prot)
+{
+	return ata_prot_flags(prot) & ATA_PROT_FLAG_DATA;
+}
+
+/*
+ * id tests
+ */
+#define ata_id_is_ata(id)	(((id)[ATA_ID_CONFIG] & (1 << 15)) == 0)
+#define ata_id_has_lba(id)	((id)[ATA_ID_CAPABILITY] & (1 << 9))
+#define ata_id_has_dma(id)	((id)[ATA_ID_CAPABILITY] & (1 << 8))
+#define ata_id_has_ncq(id)	((id)[76] & (1 << 8))
+#define ata_id_queue_depth(id)	(((id)[ATA_ID_QUEUE_DEPTH] & 0x1f) + 1)
+#define ata_id_removeable(id)	((id)[ATA_ID_CONFIG] & (1 << 7))
+#define ata_id_has_atapi_AN(id)	\
+	( (((id)[76] != 0x0000) && ((id)[76] != 0xffff)) && \
+	  ((id)[78] & (1 << 5)) )
+#define ata_id_has_fpdma_aa(id)	\
+	( (((id)[76] != 0x0000) && ((id)[76] != 0xffff)) && \
+	  ((id)[78] & (1 << 2)) )
+#define ata_id_iordy_disable(id) ((id)[ATA_ID_CAPABILITY] & (1 << 10))
+#define ata_id_has_iordy(id) ((id)[ATA_ID_CAPABILITY] & (1 << 11))
+#define ata_id_u32(id,n)	\
+	(((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)]))
+#define ata_id_u64(id,n)	\
+	( ((u64) (id)[(n) + 3] << 48) |	\
+	  ((u64) (id)[(n) + 2] << 32) |	\
+	  ((u64) (id)[(n) + 1] << 16) |	\
+	  ((u64) (id)[(n) + 0]) )
+
+#define ata_id_cdb_intr(id)	(((id)[ATA_ID_CONFIG] & 0x60) == 0x20)
+
+static inline bool ata_id_has_hipm(const u16 *id)
+{
+	u16 val = id[76];
+
+	if (val == 0 || val == 0xffff)
+		return false;
+
+	return val & (1 << 9);
+}
+
+static inline bool ata_id_has_dipm(const u16 *id)
+{
+	u16 val = id[78];
+
+	if (val == 0 || val == 0xffff)
+		return false;
+
+	return val & (1 << 3);
+}
+
+
+static inline bool ata_id_has_fua(const u16 *id)
+{
+	if ((id[ATA_ID_CFSSE] & 0xC000) != 0x4000)
+		return false;
+	return id[ATA_ID_CFSSE] & (1 << 6);
+}
+
+static inline bool ata_id_has_flush(const u16 *id)
+{
+	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
+		return false;
+	return id[ATA_ID_COMMAND_SET_2] & (1 << 12);
+}
+
+static inline bool ata_id_flush_enabled(const u16 *id)
+{
+	if (ata_id_has_flush(id) == 0)
+		return false;
+	if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
+		return false;
+	return id[ATA_ID_CFS_ENABLE_2] & (1 << 12);
+}
+
+static inline bool ata_id_has_flush_ext(const u16 *id)
+{
+	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
+		return false;
+	return id[ATA_ID_COMMAND_SET_2] & (1 << 13);
+}
+
+static inline bool ata_id_flush_ext_enabled(const u16 *id)
+{
+	if (ata_id_has_flush_ext(id) == 0)
+		return false;
+	if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
+		return false;
+	/*
+	 * some Maxtor disks have bit 13 defined incorrectly
+	 * so check bit 10 too
+	 */
+	return (id[ATA_ID_CFS_ENABLE_2] & 0x2400) == 0x2400;
+}
+
+static inline u32 ata_id_logical_sector_size(const u16 *id)
+{
+	/* T13/1699-D Revision 6a, Sep 6, 2008. Page 128.
+	 * IDENTIFY DEVICE data, word 117-118.
+	 * 0xd000 ignores bit 13 (logical:physical > 1)
+	 */
+	if ((id[ATA_ID_SECTOR_SIZE] & 0xd000) == 0x5000)
+		return (((id[ATA_ID_LOGICAL_SECTOR_SIZE+1] << 16)
+			 + id[ATA_ID_LOGICAL_SECTOR_SIZE]) * sizeof(u16)) ;
+	return ATA_SECT_SIZE;
+}
+
+static inline u8 ata_id_log2_per_physical_sector(const u16 *id)
+{
+	/* T13/1699-D Revision 6a, Sep 6, 2008. Page 128.
+	 * IDENTIFY DEVICE data, word 106.
+	 * 0xe000 ignores bit 12 (logical sector > 512 bytes)
+	 */
+	if ((id[ATA_ID_SECTOR_SIZE] & 0xe000) == 0x6000)
+		return (id[ATA_ID_SECTOR_SIZE] & 0xf);
+	return 0;
+}
+
+/* Offset of logical sectors relative to physical sectors.
+ *
+ * If device has more than one logical sector per physical sector
+ * (aka 512 byte emulation), vendors might offset the "sector 0" address
+ * so sector 63 is "naturally aligned" - e.g. FAT partition table.
+ * This avoids Read/Mod/Write penalties when using FAT partition table
+ * and updating "well aligned" (FS perspective) physical sectors on every
+ * transaction.
+ */
+static inline u16 ata_id_logical_sector_offset(const u16 *id,
+	 u8 log2_per_phys)
+{
+	u16 word_209 = id[209];
+
+	if ((log2_per_phys > 1) && (word_209 & 0xc000) == 0x4000) {
+		u16 first = word_209 & 0x3fff;
+		if (first > 0)
+			return (1 << log2_per_phys) - first;
+	}
+	return 0;
+}
+
+static inline bool ata_id_has_lba48(const u16 *id)
+{
+	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
+		return false;
+	if (!ata_id_u64(id, ATA_ID_LBA_CAPACITY_2))
+		return false;
+	return id[ATA_ID_COMMAND_SET_2] & (1 << 10);
+}
+
+static inline bool ata_id_lba48_enabled(const u16 *id)
+{
+	if (ata_id_has_lba48(id) == 0)
+		return false;
+	if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
+		return false;
+	return id[ATA_ID_CFS_ENABLE_2] & (1 << 10);
+}
+
+static inline bool ata_id_hpa_enabled(const u16 *id)
+{
+	/* Yes children, word 83 valid bits cover word 82 data */
+	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
+		return false;
+	/* And 87 covers 85-87 */
+	if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
+		return false;
+	/* Check command sets enabled as well as supported */
+	if ((id[ATA_ID_CFS_ENABLE_1] & (1 << 10)) == 0)
+		return false;
+	return id[ATA_ID_COMMAND_SET_1] & (1 << 10);
+}
+
+static inline bool ata_id_has_wcache(const u16 *id)
+{
+	/* Yes children, word 83 valid bits cover word 82 data */
+	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
+		return false;
+	return id[ATA_ID_COMMAND_SET_1] & (1 << 5);
+}
+
+static inline bool ata_id_has_pm(const u16 *id)
+{
+	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
+		return false;
+	return id[ATA_ID_COMMAND_SET_1] & (1 << 3);
+}
+
+static inline bool ata_id_rahead_enabled(const u16 *id)
+{
+	if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
+		return false;
+	return id[ATA_ID_CFS_ENABLE_1] & (1 << 6);
+}
+
+static inline bool ata_id_wcache_enabled(const u16 *id)
+{
+	if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
+		return false;
+	return id[ATA_ID_CFS_ENABLE_1] & (1 << 5);
+}
+
+/**
+ *	ata_id_major_version	-	get ATA level of drive
+ *	@id: Identify data
+ *
+ *	Caveats:
+ *		ATA-1 considers identify optional
+ *		ATA-2 introduces mandatory identify
+ *		ATA-3 introduces word 80 and accurate reporting
+ *
+ *	The practical impact of this is that ata_id_major_version cannot
+ *	reliably report on drives below ATA3.
+ */
+
+static inline unsigned int ata_id_major_version(const u16 *id)
+{
+	unsigned int mver;
+
+	if (id[ATA_ID_MAJOR_VER] == 0xFFFF)
+		return 0;
+
+	for (mver = 14; mver >= 1; mver--)
+		if (id[ATA_ID_MAJOR_VER] & (1 << mver))
+			break;
+	return mver;
+}
+
+static inline bool ata_id_is_sata(const u16 *id)
+{
+	/*
+	 * See if word 93 is 0 AND drive is at least ATA-5 compatible
+	 * verifying that word 80 by casting it to a signed type --
+	 * this trick allows us to filter out the reserved values of
+	 * 0x0000 and 0xffff along with the earlier ATA revisions...
+	 */
+	if (id[ATA_ID_HW_CONFIG] == 0 && (short)id[ATA_ID_MAJOR_VER] >= 0x0020)
+		return true;
+	return false;
+}
+
+static inline bool ata_id_has_tpm(const u16 *id)
+{
+	/* The TPM bits are only valid on ATA8 */
+	if (ata_id_major_version(id) < 8)
+		return false;
+	if ((id[48] & 0xC000) != 0x4000)
+		return false;
+	return id[48] & (1 << 0);
+}
+
+static inline bool ata_id_has_dword_io(const u16 *id)
+{
+	/* ATA 8 reuses this flag for "trusted" computing */
+	if (ata_id_major_version(id) > 7)
+		return false;
+	return id[ATA_ID_DWORD_IO] & (1 << 0);
+}
+
+static inline bool ata_id_has_unload(const u16 *id)
+{
+	if (ata_id_major_version(id) >= 7 &&
+	    (id[ATA_ID_CFSSE] & 0xC000) == 0x4000 &&
+	    id[ATA_ID_CFSSE] & (1 << 13))
+		return true;
+	return false;
+}
+
+static inline bool ata_id_has_wwn(const u16 *id)
+{
+	return (id[ATA_ID_CSF_DEFAULT] & 0xC100) == 0x4100;
+}
+
+static inline int ata_id_form_factor(const u16 *id)
+{
+	u16 val = id[168];
+
+	if (ata_id_major_version(id) < 7 || val == 0 || val == 0xffff)
+		return 0;
+
+	val &= 0xf;
+
+	if (val > 5)
+		return 0;
+
+	return val;
+}
+
+static inline int ata_id_rotation_rate(const u16 *id)
+{
+	u16 val = id[217];
+
+	if (ata_id_major_version(id) < 7 || val == 0 || val == 0xffff)
+		return 0;
+
+	if (val > 1 && val < 0x401)
+		return 0;
+
+	return val;
+}
+
+static inline bool ata_id_has_trim(const u16 *id)
+{
+	if (ata_id_major_version(id) >= 7 &&
+	    (id[ATA_ID_DATA_SET_MGMT] & 1))
+		return true;
+	return false;
+}
+
+static inline bool ata_id_has_zero_after_trim(const u16 *id)
+{
+	/* DSM supported, deterministic read, and read zero after trim set */
+	if (ata_id_has_trim(id) &&
+	    (id[ATA_ID_ADDITIONAL_SUPP] & 0x4020) == 0x4020)
+		return true;
+
+	return false;
+}
+
+static inline bool ata_id_current_chs_valid(const u16 *id)
+{
+	/* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command
+	   has not been issued to the device then the values of
+	   id[ATA_ID_CUR_CYLS] to id[ATA_ID_CUR_SECTORS] are vendor specific. */
+	return (id[ATA_ID_FIELD_VALID] & 1) && /* Current translation valid */
+		id[ATA_ID_CUR_CYLS] &&  /* cylinders in current translation */
+		id[ATA_ID_CUR_HEADS] &&  /* heads in current translation */
+		id[ATA_ID_CUR_HEADS] <= 16 &&
+		id[ATA_ID_CUR_SECTORS];    /* sectors in current translation */
+}
+
+static inline bool ata_id_is_cfa(const u16 *id)
+{
+	if ((id[ATA_ID_CONFIG] == 0x848A) ||	/* Traditional CF */
+	    (id[ATA_ID_CONFIG] == 0x844A))	/* Delkin Devices CF */
+		return true;
+	/*
+	 * CF specs don't require specific value in the word 0 anymore and yet
+	 * they forbid to report the ATA version in the word 80 and require the
+	 * CFA feature set support to be indicated in the word 83 in this case.
+	 * Unfortunately, some cards only follow either of this requirements,
+	 * and while those that don't indicate CFA feature support need some
+	 * sort of quirk list, it seems impractical for the ones that do...
+	 */
+	return (id[ATA_ID_COMMAND_SET_2] & 0xC004) == 0x4004;
+}
+
+static inline bool ata_id_is_ssd(const u16 *id)
+{
+	return id[ATA_ID_ROT_SPEED] == 0x01;
+}
+
+static inline bool ata_id_pio_need_iordy(const u16 *id, const u8 pio)
+{
+	/* CF spec. r4.1 Table 22 says no IORDY on PIO5 and PIO6. */
+	if (pio > 4 && ata_id_is_cfa(id))
+		return false;
+	/* For PIO3 and higher it is mandatory. */
+	if (pio > 2)
+		return true;
+	/* Turn it on when possible. */
+	return ata_id_has_iordy(id);
+}
+
+static inline bool ata_drive_40wire(const u16 *dev_id)
+{
+	if (ata_id_is_sata(dev_id))
+		return false;	/* SATA */
+	if ((dev_id[ATA_ID_HW_CONFIG] & 0xE000) == 0x6000)
+		return false;	/* 80 wire */
+	return true;
+}
+
+static inline bool ata_drive_40wire_relaxed(const u16 *dev_id)
+{
+	if ((dev_id[ATA_ID_HW_CONFIG] & 0x2000) == 0x2000)
+		return false;	/* 80 wire */
+	return true;
+}
+
+static inline int atapi_cdb_len(const u16 *dev_id)
+{
+	u16 tmp = dev_id[ATA_ID_CONFIG] & 0x3;
+	switch (tmp) {
+	case 0:		return 12;
+	case 1:		return 16;
+	default:	return -1;
+	}
+}
+
+static inline bool atapi_command_packet_set(const u16 *dev_id)
+{
+	return (dev_id[ATA_ID_CONFIG] >> 8) & 0x1f;
+}
+
+static inline bool atapi_id_dmadir(const u16 *dev_id)
+{
+	return ata_id_major_version(dev_id) >= 7 && (dev_id[62] & 0x8000);
+}
+
+/*
+ * ata_id_is_lba_capacity_ok() performs a sanity check on
+ * the claimed LBA capacity value for the device.
+ *
+ * Returns 1 if LBA capacity looks sensible, 0 otherwise.
+ *
+ * It is called only once for each device.
+ */
+static inline bool ata_id_is_lba_capacity_ok(u16 *id)
+{
+	unsigned long lba_sects, chs_sects, head, tail;
+
+	/* No non-LBA info .. so valid! */
+	if (id[ATA_ID_CYLS] == 0)
+		return true;
+
+	lba_sects = ata_id_u32(id, ATA_ID_LBA_CAPACITY);
+
+	/*
+	 * The ATA spec tells large drives to return
+	 * C/H/S = 16383/16/63 independent of their size.
+	 * Some drives can be jumpered to use 15 heads instead of 16.
+	 * Some drives can be jumpered to use 4092 cyls instead of 16383.
+	 */
+	if ((id[ATA_ID_CYLS] == 16383 ||
+	     (id[ATA_ID_CYLS] == 4092 && id[ATA_ID_CUR_CYLS] == 16383)) &&
+	    id[ATA_ID_SECTORS] == 63 &&
+	    (id[ATA_ID_HEADS] == 15 || id[ATA_ID_HEADS] == 16) &&
+	    (lba_sects >= 16383 * 63 * id[ATA_ID_HEADS]))
+		return true;
+
+	chs_sects = id[ATA_ID_CYLS] * id[ATA_ID_HEADS] * id[ATA_ID_SECTORS];
+
+	/* perform a rough sanity check on lba_sects: within 10% is OK */
+	if (lba_sects - chs_sects < chs_sects/10)
+		return true;
+
+	/* some drives have the word order reversed */
+	head = (lba_sects >> 16) & 0xffff;
+	tail = lba_sects & 0xffff;
+	lba_sects = head | (tail << 16);
+
+	if (lba_sects - chs_sects < chs_sects/10) {
+		*(__le32 *)&id[ATA_ID_LBA_CAPACITY] = __cpu_to_le32(lba_sects);
+		return true;	/* LBA capacity is (now) good */
+	}
+
+	return false;	/* LBA capacity value may be bad */
+}
+
+static inline void ata_id_to_hd_driveid(u16 *id)
+{
+#ifdef __BIG_ENDIAN
+	/* accessed in struct hd_driveid as 8-bit values */
+	id[ATA_ID_MAX_MULTSECT]	 = __cpu_to_le16(id[ATA_ID_MAX_MULTSECT]);
+	id[ATA_ID_CAPABILITY]	 = __cpu_to_le16(id[ATA_ID_CAPABILITY]);
+	id[ATA_ID_OLD_PIO_MODES] = __cpu_to_le16(id[ATA_ID_OLD_PIO_MODES]);
+	id[ATA_ID_OLD_DMA_MODES] = __cpu_to_le16(id[ATA_ID_OLD_DMA_MODES]);
+	id[ATA_ID_MULTSECT]	 = __cpu_to_le16(id[ATA_ID_MULTSECT]);
+
+	/* as 32-bit values */
+	*(u32 *)&id[ATA_ID_LBA_CAPACITY] = ata_id_u32(id, ATA_ID_LBA_CAPACITY);
+	*(u32 *)&id[ATA_ID_SPG]		 = ata_id_u32(id, ATA_ID_SPG);
+
+	/* as 64-bit value */
+	*(u64 *)&id[ATA_ID_LBA_CAPACITY_2] =
+		ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
+#endif
+}
+
+/*
+ * Write LBA Range Entries to the buffer that will cover the extent from
+ * sector to sector + count.  This is used for TRIM and for ADD LBA(S)
+ * TO NV CACHE PINNED SET.
+ */
+static inline unsigned ata_set_lba_range_entries(void *_buffer,
+		unsigned buf_size, u64 sector, unsigned long count)
+{
+	__le64 *buffer = _buffer;
+	unsigned i = 0, used_bytes;
+
+	while (i < buf_size / 8 ) { /* 6-byte LBA + 2-byte range per entry */
+		u64 entry = sector |
+			((u64)(count > 0xffff ? 0xffff : count) << 48);
+		buffer[i++] = __cpu_to_le64(entry);
+		if (count <= 0xffff)
+			break;
+		count -= 0xffff;
+		sector += 0xffff;
+	}
+
+	used_bytes = ALIGN(i * 8, 512);
+	memset(buffer + i, 0, used_bytes - i * 8);
+	return used_bytes;
+}
+
+static inline int is_multi_taskfile(struct ata_taskfile *tf)
+{
+	return (tf->command == ATA_CMD_READ_MULTI) ||
+	       (tf->command == ATA_CMD_WRITE_MULTI) ||
+	       (tf->command == ATA_CMD_READ_MULTI_EXT) ||
+	       (tf->command == ATA_CMD_WRITE_MULTI_EXT) ||
+	       (tf->command == ATA_CMD_WRITE_MULTI_FUA_EXT);
+}
+
+static inline bool ata_ok(u8 status)
+{
+	return ((status & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ | ATA_ERR))
+			== ATA_DRDY);
+}
+
+static inline bool lba_28_ok(u64 block, u32 n_block)
+{
+	/* check the ending block number: must be LESS THAN 0x0fffffff */
+	return ((block + n_block) < ((1 << 28) - 1)) && (n_block <= 256);
+}
+
+static inline bool lba_48_ok(u64 block, u32 n_block)
+{
+	/* check the ending block number */
+	return ((block + n_block - 1) < ((u64)1 << 48)) && (n_block <= 65536);
+}
+
+#define sata_pmp_gscr_vendor(gscr)	((gscr)[SATA_PMP_GSCR_PROD_ID] & 0xffff)
+#define sata_pmp_gscr_devid(gscr)	((gscr)[SATA_PMP_GSCR_PROD_ID] >> 16)
+#define sata_pmp_gscr_rev(gscr)		(((gscr)[SATA_PMP_GSCR_REV] >> 8) & 0xff)
+#define sata_pmp_gscr_ports(gscr)	((gscr)[SATA_PMP_GSCR_PORT_INFO] & 0xf)
+
+#endif /* __LINUX_ATA_H__ */
diff --git a/include/linux/ata_platform.h b/include/linux/ata_platform.h
new file mode 100644
index 00000000..b856a2a5
--- /dev/null
+++ b/include/linux/ata_platform.h
@@ -0,0 +1,34 @@
+#ifndef __LINUX_ATA_PLATFORM_H
+#define __LINUX_ATA_PLATFORM_H
+
+struct pata_platform_info {
+	/*
+	 * I/O port shift, for platforms with ports that are
+	 * constantly spaced and need larger than the 1-byte
+	 * spacing used by ata_std_ports().
+	 */
+	unsigned int ioport_shift;
+	/* 
+	 * Indicate platform specific irq types and initial
+	 * IRQ flags when call request_irq()
+	 */
+	unsigned int irq_flags;
+};
+
+extern int __devinit __pata_platform_probe(struct device *dev,
+					   struct resource *io_res,
+					   struct resource *ctl_res,
+					   struct resource *irq_res,
+					   unsigned int ioport_shift,
+					   int __pio_mask);
+
+extern int __devexit __pata_platform_remove(struct device *dev);
+
+/*
+ * Marvell SATA private data
+ */
+struct mv_sata_platform_data {
+	int	n_ports; /* number of sata ports */
+};
+
+#endif /* __LINUX_ATA_PLATFORM_H */
diff --git a/include/linux/atalk.h b/include/linux/atalk.h
new file mode 100644
index 00000000..f57c3688
--- /dev/null
+++ b/include/linux/atalk.h
@@ -0,0 +1,209 @@
+#ifndef __LINUX_ATALK_H__
+#define __LINUX_ATALK_H__
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include <linux/socket.h>
+
+/*
+ * AppleTalk networking structures
+ *
+ * The following are directly referenced from the University Of Michigan
+ * netatalk for compatibility reasons.
+ */
+#define ATPORT_FIRST	1
+#define ATPORT_RESERVED	128
+#define ATPORT_LAST	254		/* 254 is only legal on localtalk */ 
+#define ATADDR_ANYNET	(__u16)0
+#define ATADDR_ANYNODE	(__u8)0
+#define ATADDR_ANYPORT  (__u8)0
+#define ATADDR_BCAST	(__u8)255
+#define DDP_MAXSZ	587
+#define DDP_MAXHOPS     15		/* 4 bits of hop counter */
+
+#define SIOCATALKDIFADDR       (SIOCPROTOPRIVATE + 0)
+
+struct atalk_addr {
+	__be16	s_net;
+	__u8	s_node;
+};
+
+struct sockaddr_at {
+	__kernel_sa_family_t sat_family;
+	__u8		  sat_port;
+	struct atalk_addr sat_addr;
+	char		  sat_zero[8];
+};
+
+struct atalk_netrange {
+	__u8	nr_phase;
+	__be16	nr_firstnet;
+	__be16	nr_lastnet;
+};
+
+#ifdef __KERNEL__
+
+#include <net/sock.h>
+
+struct atalk_route {
+	struct net_device  *dev;
+	struct atalk_addr  target;
+	struct atalk_addr  gateway;
+	int		   flags;
+	struct atalk_route *next;
+};
+
+/**
+ *	struct atalk_iface - AppleTalk Interface
+ *	@dev - Network device associated with this interface
+ *	@address - Our address
+ *	@status - What are we doing?
+ *	@nets - Associated direct netrange
+ *	@next - next element in the list of interfaces
+ */
+struct atalk_iface {
+	struct net_device	*dev;
+	struct atalk_addr	address;
+	int			status;
+#define ATIF_PROBE	1		/* Probing for an address */
+#define ATIF_PROBE_FAIL	2		/* Probe collided */
+	struct atalk_netrange	nets;
+	struct atalk_iface	*next;
+};
+	
+struct atalk_sock {
+	/* struct sock has to be the first member of atalk_sock */
+	struct sock	sk;
+	__be16		dest_net;
+	__be16		src_net;
+	unsigned char	dest_node;
+	unsigned char	src_node;
+	unsigned char	dest_port;
+	unsigned char	src_port;
+};
+
+static inline struct atalk_sock *at_sk(struct sock *sk)
+{
+	return (struct atalk_sock *)sk;
+}
+
+struct ddpehdr {
+	__be16	deh_len_hops;	/* lower 10 bits are length, next 4 - hops */
+	__be16	deh_sum;
+	__be16	deh_dnet;
+	__be16	deh_snet;
+	__u8	deh_dnode;
+	__u8	deh_snode;
+	__u8	deh_dport;
+	__u8	deh_sport;
+	/* And netatalk apps expect to stick the type in themselves */
+};
+
+static __inline__ struct ddpehdr *ddp_hdr(struct sk_buff *skb)
+{
+	return (struct ddpehdr *)skb_transport_header(skb);
+}
+
+/* AppleTalk AARP headers */
+struct elapaarp {
+	__be16	hw_type;
+#define AARP_HW_TYPE_ETHERNET		1
+#define AARP_HW_TYPE_TOKENRING		2
+	__be16	pa_type;
+	__u8	hw_len;
+	__u8	pa_len;
+#define AARP_PA_ALEN			4
+	__be16	function;
+#define AARP_REQUEST			1
+#define AARP_REPLY			2
+#define AARP_PROBE			3
+	__u8	hw_src[ETH_ALEN];
+	__u8	pa_src_zero;
+	__be16	pa_src_net;
+	__u8	pa_src_node;
+	__u8	hw_dst[ETH_ALEN];
+	__u8	pa_dst_zero;
+	__be16	pa_dst_net;
+	__u8	pa_dst_node;
+} __attribute__ ((packed));
+
+static __inline__ struct elapaarp *aarp_hdr(struct sk_buff *skb)
+{
+	return (struct elapaarp *)skb_transport_header(skb);
+}
+
+/* Not specified - how long till we drop a resolved entry */
+#define AARP_EXPIRY_TIME	(5 * 60 * HZ)
+/* Size of hash table */
+#define AARP_HASH_SIZE		16
+/* Fast retransmission timer when resolving */
+#define AARP_TICK_TIME		(HZ / 5)
+/* Send 10 requests then give up (2 seconds) */
+#define AARP_RETRANSMIT_LIMIT	10
+/*
+ * Some value bigger than total retransmit time + a bit for last reply to
+ * appear and to stop continual requests
+ */
+#define AARP_RESOLVE_TIME	(10 * HZ)
+
+extern struct datalink_proto *ddp_dl, *aarp_dl;
+extern void aarp_proto_init(void);
+
+/* Inter module exports */
+
+/* Give a device find its atif control structure */
+static inline struct atalk_iface *atalk_find_dev(struct net_device *dev)
+{
+	return dev->atalk_ptr;
+}
+
+extern struct atalk_addr *atalk_find_dev_addr(struct net_device *dev);
+extern struct net_device *atrtr_get_dev(struct atalk_addr *sa);
+extern int		 aarp_send_ddp(struct net_device *dev,
+				       struct sk_buff *skb,
+				       struct atalk_addr *sa, void *hwaddr);
+extern void		 aarp_device_down(struct net_device *dev);
+extern void		 aarp_probe_network(struct atalk_iface *atif);
+extern int 		 aarp_proxy_probe_network(struct atalk_iface *atif,
+				     struct atalk_addr *sa);
+extern void		 aarp_proxy_remove(struct net_device *dev,
+					   struct atalk_addr *sa);
+
+extern void		aarp_cleanup_module(void);
+
+extern struct hlist_head atalk_sockets;
+extern rwlock_t atalk_sockets_lock;
+
+extern struct atalk_route *atalk_routes;
+extern rwlock_t atalk_routes_lock;
+
+extern struct atalk_iface *atalk_interfaces;
+extern rwlock_t atalk_interfaces_lock;
+
+extern struct atalk_route atrtr_default;
+
+extern const struct file_operations atalk_seq_arp_fops;
+
+extern int sysctl_aarp_expiry_time;
+extern int sysctl_aarp_tick_time;
+extern int sysctl_aarp_retransmit_limit;
+extern int sysctl_aarp_resolve_time;
+
+#ifdef CONFIG_SYSCTL
+extern void atalk_register_sysctl(void);
+extern void atalk_unregister_sysctl(void);
+#else
+#define atalk_register_sysctl()		do { } while(0)
+#define atalk_unregister_sysctl()	do { } while(0)
+#endif
+
+#ifdef CONFIG_PROC_FS
+extern int atalk_proc_init(void);
+extern void atalk_proc_exit(void);
+#else
+#define atalk_proc_init()	({ 0; })
+#define atalk_proc_exit()	do { } while(0)
+#endif /* CONFIG_PROC_FS */
+
+#endif /* __KERNEL__ */
+#endif /* __LINUX_ATALK_H__ */
diff --git a/include/linux/ath9k_platform.h b/include/linux/ath9k_platform.h
new file mode 100644
index 00000000..6e3f54f3
--- /dev/null
+++ b/include/linux/ath9k_platform.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _LINUX_ATH9K_PLATFORM_H
+#define _LINUX_ATH9K_PLATFORM_H
+
+#define ATH9K_PLAT_EEP_MAX_WORDS	2048
+
+struct ath9k_platform_data {
+	u16 eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS];
+	u8 *macaddr;
+
+	int led_pin;
+	u32 gpio_mask;
+	u32 gpio_val;
+
+	bool is_clk_25mhz;
+	int (*get_mac_revision)(void);
+	int (*external_reset)(void);
+};
+
+#endif /* _LINUX_ATH9K_PLATFORM_H */
diff --git a/include/linux/atm.h b/include/linux/atm.h
new file mode 100644
index 00000000..d3b29217
--- /dev/null
+++ b/include/linux/atm.h
@@ -0,0 +1,251 @@
+/* atm.h - general ATM declarations */
+ 
+/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
+ 
+
+/*
+ * WARNING: User-space programs should not #include <linux/atm.h> directly.
+ *          Instead, #include <atm.h>
+ */
+
+#ifndef _LINUX_ATM_H
+#define _LINUX_ATM_H
+
+/*
+ * BEGIN_xx and END_xx markers are used for automatic generation of
+ * documentation. Do not change them.
+ */
+
+#include <linux/compiler.h>
+#include <linux/atmapi.h>
+#include <linux/atmsap.h>
+#include <linux/atmioc.h>
+#include <linux/types.h>
+
+
+/* general ATM constants */
+#define ATM_CELL_SIZE		    53	/* ATM cell size incl. header */
+#define ATM_CELL_PAYLOAD	    48	/* ATM payload size */
+#define ATM_AAL0_SDU		    52	/* AAL0 SDU size */
+#define ATM_MAX_AAL34_PDU	 65535	/* maximum AAL3/4 PDU payload */
+#define ATM_AAL5_TRAILER	     8	/* AAL5 trailer size */
+#define ATM_MAX_AAL5_PDU	 65535	/* maximum AAL5 PDU payload */
+#define ATM_MAX_CDV		  9999	/* maximum (default) CDV */
+#define ATM_NOT_RSV_VCI		    32	/* first non-reserved VCI value */
+
+#define ATM_MAX_VPI		   255	/* maximum VPI at the UNI */
+#define ATM_MAX_VPI_NNI		  4096	/* maximum VPI at the NNI */
+#define ATM_MAX_VCI		 65535	/* maximum VCI */
+
+
+/* "protcol" values for the socket system call */
+#define ATM_NO_AAL	0		/* AAL not specified */
+#define ATM_AAL0	13		/* "raw" ATM cells */
+#define ATM_AAL1	1		/* AAL1 (CBR) */
+#define ATM_AAL2	2		/* AAL2 (VBR) */
+#define ATM_AAL34	3		/* AAL3/4 (data) */
+#define ATM_AAL5	5		/* AAL5 (data) */
+
+/*
+ * socket option name coding functions
+ *
+ * Note that __SO_ENCODE and __SO_LEVEL are somewhat a hack since the
+ * << 22 only reserves 9 bits for the level.  On some architectures
+ * SOL_SOCKET is 0xFFFF, so that's a bit of a problem
+ */
+
+#define __SO_ENCODE(l,n,t)	((((l) & 0x1FF) << 22) | ((n) << 16) | \
+				sizeof(t))
+#define __SO_LEVEL_MATCH(c,m)	(((c) >> 22) == ((m) & 0x1FF))
+#define __SO_NUMBER(c)		(((c) >> 16) & 0x3f)
+#define __SO_SIZE(c)		((c) & 0x3fff)
+
+/*
+ * ATM layer
+ */
+
+#define SO_SETCLP	__SO_ENCODE(SOL_ATM,0,int)
+			    /* set CLP bit value - TODO */
+#define SO_CIRANGE	__SO_ENCODE(SOL_ATM,1,struct atm_cirange)
+			    /* connection identifier range; socket must be
+			       bound or connected */
+#define SO_ATMQOS	__SO_ENCODE(SOL_ATM,2,struct atm_qos)
+			    /* Quality of Service setting */
+#define SO_ATMSAP	__SO_ENCODE(SOL_ATM,3,struct atm_sap)
+			    /* Service Access Point */
+#define SO_ATMPVC	__SO_ENCODE(SOL_ATM,4,struct sockaddr_atmpvc)
+			    /* "PVC" address (also for SVCs); get only */
+#define SO_MULTIPOINT	__SO_ENCODE(SOL_ATM, 5, int)
+			    /* make this vc a p2mp */
+
+
+/*
+ * Note @@@: since the socket layers don't really distinguish the control and
+ * the data plane but generally seems to be data plane-centric, any layer is
+ * about equally wrong for the SAP. If you have a better idea about this,
+ * please speak up ...
+ */
+
+
+/* ATM cell header (for AAL0) */
+
+/* BEGIN_CH */
+#define ATM_HDR_GFC_MASK	0xf0000000
+#define ATM_HDR_GFC_SHIFT	28
+#define ATM_HDR_VPI_MASK	0x0ff00000
+#define ATM_HDR_VPI_SHIFT	20
+#define ATM_HDR_VCI_MASK	0x000ffff0
+#define ATM_HDR_VCI_SHIFT	4
+#define ATM_HDR_PTI_MASK	0x0000000e
+#define ATM_HDR_PTI_SHIFT	1
+#define ATM_HDR_CLP		0x00000001
+/* END_CH */
+
+
+/* PTI codings */
+
+/* BEGIN_PTI */
+#define ATM_PTI_US0	0  /* user data cell, congestion not exp, SDU-type 0 */
+#define ATM_PTI_US1	1  /* user data cell, congestion not exp, SDU-type 1 */
+#define ATM_PTI_UCES0	2  /* user data cell, cong. experienced, SDU-type 0 */
+#define ATM_PTI_UCES1	3  /* user data cell, cong. experienced, SDU-type 1 */
+#define ATM_PTI_SEGF5	4  /* segment OAM F5 flow related cell */
+#define ATM_PTI_E2EF5	5  /* end-to-end OAM F5 flow related cell */
+#define ATM_PTI_RSV_RM	6  /* reserved for traffic control/resource mgmt */
+#define ATM_PTI_RSV	7  /* reserved */
+/* END_PTI */
+
+
+/*
+ * The following items should stay in linux/atm.h, which should be linked to
+ * netatm/atm.h
+ */
+
+/* Traffic description */
+
+#define ATM_NONE	0		/* no traffic */
+#define ATM_UBR		1
+#define ATM_CBR		2
+#define ATM_VBR		3
+#define ATM_ABR		4
+#define ATM_ANYCLASS	5		/* compatible with everything */
+
+#define ATM_MAX_PCR	-1		/* maximum available PCR */
+
+struct atm_trafprm {
+	unsigned char	traffic_class;	/* traffic class (ATM_UBR, ...) */
+	int		max_pcr;	/* maximum PCR in cells per second */
+	int		pcr;		/* desired PCR in cells per second */
+	int		min_pcr;	/* minimum PCR in cells per second */
+	int		max_cdv;	/* maximum CDV in microseconds */
+	int		max_sdu;	/* maximum SDU in bytes */
+        /* extra params for ABR */
+        unsigned int 	icr;         	/* Initial Cell Rate (24-bit) */
+        unsigned int	tbe;		/* Transient Buffer Exposure (24-bit) */ 
+        unsigned int 	frtt : 24;	/* Fixed Round Trip Time (24-bit) */
+        unsigned int 	rif  : 4;       /* Rate Increment Factor (4-bit) */
+        unsigned int 	rdf  : 4;       /* Rate Decrease Factor (4-bit) */
+        unsigned int nrm_pres  :1;      /* nrm present bit */
+        unsigned int trm_pres  :1;     	/* rm present bit */
+        unsigned int adtf_pres :1;     	/* adtf present bit */
+        unsigned int cdf_pres  :1;    	/* cdf present bit*/
+        unsigned int nrm       :3;     	/* Max # of Cells for each forward RM cell (3-bit) */
+        unsigned int trm       :3;    	/* Time between forward RM cells (3-bit) */    
+	unsigned int adtf      :10;     /* ACR Decrease Time Factor (10-bit) */
+	unsigned int cdf       :3;      /* Cutoff Decrease Factor (3-bit) */
+        unsigned int spare     :9;      /* spare bits */ 
+};
+
+struct atm_qos {
+	struct atm_trafprm txtp;	/* parameters in TX direction */
+	struct atm_trafprm rxtp __ATM_API_ALIGN;
+					/* parameters in RX direction */
+	unsigned char aal __ATM_API_ALIGN;
+};
+
+/* PVC addressing */
+
+#define ATM_ITF_ANY	-1		/* "magic" PVC address values */
+#define ATM_VPI_ANY	-1
+#define ATM_VCI_ANY	-1
+#define ATM_VPI_UNSPEC	-2
+#define ATM_VCI_UNSPEC	-2
+
+
+struct sockaddr_atmpvc {
+	unsigned short 	sap_family;	/* address family, AF_ATMPVC  */
+	struct {			/* PVC address */
+		short	itf;		/* ATM interface */
+		short	vpi;		/* VPI (only 8 bits at UNI) */
+		int	vci;		/* VCI (only 16 bits at UNI) */
+	} sap_addr __ATM_API_ALIGN;	/* PVC address */
+};
+
+/* SVC addressing */
+
+#define	ATM_ESA_LEN	20		/* ATM End System Address length */
+#define ATM_E164_LEN	12		/* maximum E.164 number length */
+
+#define ATM_AFI_DCC	0x39		/* DCC ATM Format */
+#define ATM_AFI_ICD	0x47		/* ICD ATM Format */
+#define ATM_AFI_E164	0x45		/* E.164 ATM Format */
+#define ATM_AFI_LOCAL	0x49		/* Local ATM Format */ 
+
+#define ATM_AFI_DCC_GROUP	0xBD	/* DCC ATM Group Format */
+#define ATM_AFI_ICD_GROUP	0xC5	/* ICD ATM Group Format */
+#define ATM_AFI_E164_GROUP	0xC3	/* E.164 ATM Group Format */
+#define ATM_AFI_LOCAL_GROUP	0xC7	/* Local ATM Group Format */
+
+#define ATM_LIJ_NONE	0		/* no leaf-initiated join */
+#define ATM_LIJ		1		/* request joining */
+#define ATM_LIJ_RPJ	2		/* set to root-prompted join */
+#define ATM_LIJ_NJ	3		/* set to network join */
+
+
+struct sockaddr_atmsvc {
+    unsigned short 	sas_family;	/* address family, AF_ATMSVC */
+    struct {				/* SVC address */
+        unsigned char	prv[ATM_ESA_LEN];/* private ATM address */
+        char		pub[ATM_E164_LEN+1]; /* public address (E.164) */
+    					/* unused addresses must be bzero'ed */
+	char		lij_type;	/* role in LIJ call; one of ATM_LIJ* */
+	__u32	lij_id;		/* LIJ call identifier */
+    } sas_addr __ATM_API_ALIGN;		/* SVC address */
+};
+
+
+static __inline__ int atmsvc_addr_in_use(struct sockaddr_atmsvc addr)
+{
+	return *addr.sas_addr.prv || *addr.sas_addr.pub;
+}
+
+
+static __inline__ int atmpvc_addr_in_use(struct sockaddr_atmpvc addr)
+{
+	return addr.sap_addr.itf || addr.sap_addr.vpi || addr.sap_addr.vci;
+}
+
+
+/*
+ * Some stuff for linux/sockios.h
+ */
+
+struct atmif_sioc {
+	int number;
+	int length;
+	void __user *arg;
+};
+
+#ifdef __KERNEL__
+#ifdef CONFIG_COMPAT
+#include <linux/compat.h>
+struct compat_atmif_sioc {
+	int number;
+	int length;
+	compat_uptr_t arg;
+};
+#endif
+#endif
+
+typedef unsigned short atm_backend_t;
+#endif
diff --git a/include/linux/atm_eni.h b/include/linux/atm_eni.h
new file mode 100644
index 00000000..34f31797
--- /dev/null
+++ b/include/linux/atm_eni.h
@@ -0,0 +1,23 @@
+/* atm_eni.h - Driver-specific declarations of the ENI driver (for use by
+	       driver-specific utilities) */
+
+/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
+
+
+#ifndef LINUX_ATM_ENI_H
+#define LINUX_ATM_ENI_H
+
+#include <linux/atmioc.h>
+
+
+struct eni_multipliers {
+	int tx,rx;	/* values are in percent and must be > 100 */
+};
+
+
+#define ENI_MEMDUMP     _IOW('a',ATMIOC_SARPRV,struct atmif_sioc)
+                                                /* printk memory map */
+#define ENI_SETMULT	_IOW('a',ATMIOC_SARPRV+7,struct atmif_sioc)
+						/* set buffer multipliers */
+
+#endif
diff --git a/include/linux/atm_he.h b/include/linux/atm_he.h
new file mode 100644
index 00000000..2a7713b5
--- /dev/null
+++ b/include/linux/atm_he.h
@@ -0,0 +1,20 @@
+/* atm_he.h */
+
+#ifndef LINUX_ATM_HE_H
+#define LINUX_ATM_HE_H
+
+#include <linux/atmioc.h>
+
+#define HE_GET_REG	_IOW('a', ATMIOC_SARPRV, struct atmif_sioc)
+
+#define HE_REGTYPE_PCI	1
+#define HE_REGTYPE_RCM	2
+#define HE_REGTYPE_TCM	3
+#define HE_REGTYPE_MBOX	4
+
+struct he_ioctl_reg {
+	unsigned addr, val;
+	char type;
+};
+
+#endif /* LINUX_ATM_HE_H */
diff --git a/include/linux/atm_idt77105.h b/include/linux/atm_idt77105.h
new file mode 100644
index 00000000..8b724000
--- /dev/null
+++ b/include/linux/atm_idt77105.h
@@ -0,0 +1,28 @@
+/* atm_idt77105.h - Driver-specific declarations of the IDT77105 driver (for
+ * use by driver-specific utilities) */
+
+/* Written 1999 by Greg Banks <gnb@linuxfan.com>. Copied from atm_suni.h. */
+
+
+#ifndef LINUX_ATM_IDT77105_H
+#define LINUX_ATM_IDT77105_H
+
+#include <linux/types.h>
+#include <linux/atmioc.h>
+#include <linux/atmdev.h>
+
+/*
+ * Structure for IDT77105_GETSTAT and IDT77105_GETSTATZ ioctls.
+ * Pointed to by `arg' in atmif_sioc.
+ */
+struct idt77105_stats {
+        __u32 symbol_errors;  /* wire symbol errors */
+        __u32 tx_cells;       /* cells transmitted */
+        __u32 rx_cells;       /* cells received */
+        __u32 rx_hec_errors;  /* Header Error Check errors on receive */
+};
+
+#define IDT77105_GETSTAT	_IOW('a',ATMIOC_PHYPRV+2,struct atmif_sioc)	/* get stats */
+#define IDT77105_GETSTATZ	_IOW('a',ATMIOC_PHYPRV+3,struct atmif_sioc)	/* get stats and zero */
+
+#endif
diff --git a/include/linux/atm_nicstar.h b/include/linux/atm_nicstar.h
new file mode 100644
index 00000000..577b79f3
--- /dev/null
+++ b/include/linux/atm_nicstar.h
@@ -0,0 +1,53 @@
+/******************************************************************************
+ *
+ * atm_nicstar.h
+ *
+ * Driver-specific declarations for use by NICSTAR driver specific utils.
+ *
+ * Author: Rui Prior
+ *
+ * (C) INESC 1998
+ *
+ ******************************************************************************/
+
+
+#ifndef LINUX_ATM_NICSTAR_H
+#define LINUX_ATM_NICSTAR_H
+
+/* Note: non-kernel programs including this file must also include
+ * sys/types.h for struct timeval
+ */
+
+#include <linux/atmapi.h>
+#include <linux/atmioc.h>
+
+#define NS_GETPSTAT	_IOWR('a',ATMIOC_SARPRV+1,struct atmif_sioc)
+						/* get pool statistics */
+#define NS_SETBUFLEV	_IOW('a',ATMIOC_SARPRV+2,struct atmif_sioc)
+						/* set buffer level markers */
+#define NS_ADJBUFLEV	_IO('a',ATMIOC_SARPRV+3)
+						/* adjust buffer level */
+
+typedef struct buf_nr
+{
+   unsigned min;
+   unsigned init;
+   unsigned max;
+}buf_nr;
+
+
+typedef struct pool_levels
+{
+   int buftype;
+   int count;		/* (At least for now) only used in NS_GETPSTAT */
+   buf_nr level;
+} pool_levels;
+
+/* type must be one of the following: */
+#define NS_BUFTYPE_SMALL 1
+#define NS_BUFTYPE_LARGE 2
+#define NS_BUFTYPE_HUGE 3
+#define NS_BUFTYPE_IOVEC 4
+
+
+#endif /* LINUX_ATM_NICSTAR_H */
diff --git a/include/linux/atm_suni.h b/include/linux/atm_suni.h
new file mode 100644
index 00000000..84f3aab5
--- /dev/null
+++ b/include/linux/atm_suni.h
@@ -0,0 +1,12 @@
+/* atm_suni.h - Driver-specific declarations of the SUNI driver (for use by
+		driver-specific utilities) */
+
+/* Written 1998,2000 by Werner Almesberger, EPFL ICA */
+
+
+#ifndef LINUX_ATM_SUNI_H
+#define LINUX_ATM_SUNI_H
+
+/* everything obsoleted */
+
+#endif
diff --git a/include/linux/atm_tcp.h b/include/linux/atm_tcp.h
new file mode 100644
index 00000000..375638f8
--- /dev/null
+++ b/include/linux/atm_tcp.h
@@ -0,0 +1,73 @@
+/* atm_tcp.h - Driver-specific declarations of the ATMTCP driver (for use by
+	       driver-specific utilities) */
+
+/* Written 1997-2000 by Werner Almesberger, EPFL LRC/ICA */
+
+
+#ifndef LINUX_ATM_TCP_H
+#define LINUX_ATM_TCP_H
+
+#include <linux/atmapi.h>
+#include <linux/atm.h>
+#include <linux/atmioc.h>
+#include <linux/types.h>
+
+
+/*
+ * All values in struct atmtcp_hdr are in network byte order
+ */
+
+struct atmtcp_hdr {
+	__u16	vpi;
+	__u16	vci;
+	__u32	length;		/* ... of data part */
+};
+
+/*
+ * All values in struct atmtcp_command are in host byte order
+ */
+
+#define ATMTCP_HDR_MAGIC	(~0)	/* this length indicates a command */
+#define ATMTCP_CTRL_OPEN	1	/* request/reply */
+#define ATMTCP_CTRL_CLOSE	2	/* request/reply */
+
+struct atmtcp_control {
+	struct atmtcp_hdr hdr;	/* must be first */
+	int type;		/* message type; both directions */
+	atm_kptr_t vcc;		/* both directions */
+	struct sockaddr_atmpvc addr; /* suggested value from kernel */
+	struct atm_qos	qos;	/* both directions */
+	int result;		/* to kernel only */
+} __ATM_API_ALIGN;
+
+/*
+ * Field usage:
+ * Messge type	dir.	hdr.v?i	type	addr	qos	vcc	result
+ * -----------  ----	------- ----	----	---	---	------
+ * OPEN		K->D	Y	Y	Y	Y	Y	0
+ * OPEN		D->K	-	Y	Y	Y	Y	Y
+ * CLOSE	K->D	-	-	Y	-	Y	0
+ * CLOSE	D->K	-	-	-	-	Y	Y
+ */
+
+#define SIOCSIFATMTCP	_IO('a',ATMIOC_ITF)	/* set ATMTCP mode */
+#define ATMTCP_CREATE	_IO('a',ATMIOC_ITF+14)	/* create persistent ATMTCP
+						   interface */
+#define ATMTCP_REMOVE	_IO('a',ATMIOC_ITF+15)	/* destroy persistent ATMTCP
+						   interface */
+
+
+#ifdef __KERNEL__
+
+struct atm_tcp_ops {
+	int (*attach)(struct atm_vcc *vcc,int itf);
+	int (*create_persistent)(int itf);
+	int (*remove_persistent)(int itf);
+	struct module *owner;
+};
+
+extern struct atm_tcp_ops atm_tcp_ops;
+
+#endif
+
+#endif
diff --git a/include/linux/atm_zatm.h b/include/linux/atm_zatm.h
new file mode 100644
index 00000000..10f0fa29
--- /dev/null
+++ b/include/linux/atm_zatm.h
@@ -0,0 +1,52 @@
+/* atm_zatm.h - Driver-specific declarations of the ZATM driver (for use by
+		driver-specific utilities) */
+
+/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */
+
+
+#ifndef LINUX_ATM_ZATM_H
+#define LINUX_ATM_ZATM_H
+
+/*
+ * Note: non-kernel programs including this file must also include
+ * sys/types.h for struct timeval
+ */
+
+#include <linux/atmapi.h>
+#include <linux/atmioc.h>
+
+#define ZATM_GETPOOL	_IOW('a',ATMIOC_SARPRV+1,struct atmif_sioc)
+						/* get pool statistics */
+#define ZATM_GETPOOLZ	_IOW('a',ATMIOC_SARPRV+2,struct atmif_sioc)
+						/* get statistics and zero */
+#define ZATM_SETPOOL	_IOW('a',ATMIOC_SARPRV+3,struct atmif_sioc)
+						/* set pool parameters */
+
+struct zatm_pool_info {
+	int ref_count;			/* free buffer pool usage counters */
+	int low_water,high_water;	/* refill parameters */
+	int rqa_count,rqu_count;	/* queue condition counters */
+	int offset,next_off;		/* alignment optimizations: offset */
+	int next_cnt,next_thres;	/* repetition counter and threshold */
+};
+
+struct zatm_pool_req {
+	int pool_num;			/* pool number */
+	struct zatm_pool_info info;	/* actual information */
+};
+
+struct zatm_t_hist {
+	struct timeval real;		/* real (wall-clock) time */
+	struct timeval expected;	/* expected real time */
+};
+
+
+#define ZATM_OAM_POOL		0	/* free buffer pool for OAM cells */
+#define ZATM_AAL0_POOL		1	/* free buffer pool for AAL0 cells */
+#define ZATM_AAL5_POOL_BASE	2	/* first AAL5 free buffer pool */
+#define ZATM_LAST_POOL	ZATM_AAL5_POOL_BASE+10 /* max. 64 kB */
+
+#define ZATM_TIMER_HISTORY_SIZE	16	/* number of timer adjustments to
+					   record; must be 2^n */
+
+#endif
diff --git a/include/linux/atmapi.h b/include/linux/atmapi.h
new file mode 100644
index 00000000..8fe54d90
--- /dev/null
+++ b/include/linux/atmapi.h
@@ -0,0 +1,29 @@
+/* atmapi.h - ATM API user space/kernel compatibility */
+ 
+/* Written 1999,2000 by Werner Almesberger, EPFL ICA */
+ 
+
+#ifndef _LINUX_ATMAPI_H
+#define _LINUX_ATMAPI_H
+
+#if defined(__sparc__) || defined(__ia64__)
+/* such alignment is not required on 32 bit sparcs, but we can't
+   figure that we are on a sparc64 while compiling user-space programs. */
+#define __ATM_API_ALIGN	__attribute__((aligned(8)))
+#else
+#define __ATM_API_ALIGN
+#endif
+
+
+/*
+ * Opaque type for kernel pointers. Note that _ is never accessed. We need
+ * the struct in order hide the array, so that we can make simple assignments
+ * instead of being forced to use memcpy. It also improves error reporting for
+ * code that still assumes that we're passing unsigned longs.
+ *
+ * Convention: NULL pointers are passed as a field of all zeroes.
+ */
+ 
+typedef struct { unsigned char _[8]; } __ATM_API_ALIGN atm_kptr_t;
+
+#endif
diff --git a/include/linux/atmarp.h b/include/linux/atmarp.h
new file mode 100644
index 00000000..231f4bde
--- /dev/null
+++ b/include/linux/atmarp.h
@@ -0,0 +1,41 @@
+/* atmarp.h - ATM ARP protocol and kernel-demon interface definitions */
+ 
+/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */
+ 
+
+#ifndef _LINUX_ATMARP_H
+#define _LINUX_ATMARP_H
+
+#include <linux/types.h>
+#include <linux/atmapi.h>
+#include <linux/atmioc.h>
+
+
+#define ATMARP_RETRY_DELAY 30		/* request next resolution or forget
+					   NAK after 30 sec - should go into
+					   atmclip.h */
+#define ATMARP_MAX_UNRES_PACKETS 5	/* queue that many packets while
+					   waiting for the resolver */
+
+
+#define ATMARPD_CTRL	_IO('a',ATMIOC_CLIP+1)	/* become atmarpd ctrl sock */
+#define ATMARP_MKIP	_IO('a',ATMIOC_CLIP+2)	/* attach socket to IP */
+#define ATMARP_SETENTRY	_IO('a',ATMIOC_CLIP+3)	/* fill or hide ARP entry */
+#define ATMARP_ENCAP	_IO('a',ATMIOC_CLIP+5)	/* change encapsulation */
+
+
+enum atmarp_ctrl_type {
+	act_invalid,		/* catch uninitialized structures */
+	act_need,		/* need address resolution */
+	act_up,			/* interface is coming up */
+	act_down,		/* interface is going down */
+	act_change		/* interface configuration has changed */
+};
+
+struct atmarp_ctrl {
+	enum atmarp_ctrl_type	type;	/* message type */
+	int			itf_num;/* interface number (if present) */
+	__be32			ip;	/* IP address (act_need only) */
+};
+
+#endif
diff --git a/include/linux/atmbr2684.h b/include/linux/atmbr2684.h
new file mode 100644
index 00000000..fdb2629b
--- /dev/null
+++ b/include/linux/atmbr2684.h
@@ -0,0 +1,117 @@
+#ifndef _LINUX_ATMBR2684_H
+#define _LINUX_ATMBR2684_H
+
+#include <linux/types.h>
+#include <linux/atm.h>
+#include <linux/if.h>		/* For IFNAMSIZ */
+
+/*
+ * Type of media we're bridging (ethernet, token ring, etc)  Currently only
+ * ethernet is supported
+ */
+#define BR2684_MEDIA_ETHERNET	(0)	/* 802.3 */
+#define BR2684_MEDIA_802_4	(1)	/* 802.4 */
+#define BR2684_MEDIA_TR		(2)	/* 802.5 - token ring */
+#define BR2684_MEDIA_FDDI	(3)
+#define BR2684_MEDIA_802_6	(4)	/* 802.6 */
+
+					/* used only at device creation:  */
+#define BR2684_FLAG_ROUTED	(1<<16)	/* payload is routed, not bridged */
+
+/*
+ * Is there FCS inbound on this VC?  This currently isn't supported.
+ */
+#define BR2684_FCSIN_NO		(0)
+#define BR2684_FCSIN_IGNORE	(1)
+#define BR2684_FCSIN_VERIFY	(2)
+
+/*
+ * Is there FCS outbound on this VC?  This currently isn't supported.
+ */
+#define BR2684_FCSOUT_NO	(0)
+#define BR2684_FCSOUT_SENDZERO	(1)
+#define BR2684_FCSOUT_GENERATE	(2)
+
+/*
+ * Does this VC include LLC encapsulation?
+ */
+#define BR2684_ENCAPS_VC	(0)	/* VC-mux */
+#define BR2684_ENCAPS_LLC	(1)
+#define BR2684_ENCAPS_AUTODETECT (2)	/* Unsuported */
+
+/*
+ * Is this VC bridged or routed?
+ */
+
+#define BR2684_PAYLOAD_ROUTED   (0)
+#define BR2684_PAYLOAD_BRIDGED  (1)
+
+/*
+ * This is for the ATM_NEWBACKENDIF call - these are like socket families:
+ * the first element of the structure is the backend number and the rest
+ * is per-backend specific
+ */
+struct atm_newif_br2684 {
+	atm_backend_t backend_num;	/* ATM_BACKEND_BR2684 */
+	int media;		/* BR2684_MEDIA_*, flags in upper bits */
+	char ifname[IFNAMSIZ];
+	int mtu;
+};
+
+/*
+ * This structure is used to specify a br2684 interface - either by a
+ * positive integer (returned by ATM_NEWBACKENDIF) or the interfaces name
+ */
+#define BR2684_FIND_BYNOTHING	(0)
+#define BR2684_FIND_BYNUM	(1)
+#define BR2684_FIND_BYIFNAME	(2)
+struct br2684_if_spec {
+	int method;		/* BR2684_FIND_* */
+	union {
+		char ifname[IFNAMSIZ];
+		int devnum;
+	} spec;
+};
+
+/*
+ * This is for the ATM_SETBACKEND call - these are like socket families:
+ * the first element of the structure is the backend number and the rest
+ * is per-backend specific
+ */
+struct atm_backend_br2684 {
+	atm_backend_t backend_num;	/* ATM_BACKEND_BR2684 */
+	struct br2684_if_spec ifspec;
+	int fcs_in;		/* BR2684_FCSIN_* */
+	int fcs_out;		/* BR2684_FCSOUT_* */
+	int fcs_auto;		/* 1: fcs_{in,out} disabled if no FCS rx'ed */
+	int encaps;		/* BR2684_ENCAPS_* */
+	int has_vpiid;		/* 1: use vpn_id - Unsupported */
+	__u8 vpn_id[7];
+	int send_padding;	/* unsupported */
+	int min_size;		/* we will pad smaller packets than this */
+};
+
+/*
+ * The BR2684_SETFILT ioctl is an experimental mechanism for folks
+ * terminating a large number of IP-only vcc's.  When netfilter allows
+ * efficient per-if in/out filters, this support will be removed
+ */
+struct br2684_filter {
+	__be32 prefix;		/* network byte order */
+	__be32 netmask;		/* 0 = disable filter */
+};
+
+struct br2684_filter_set {
+	struct br2684_if_spec ifspec;
+	struct br2684_filter filter;
+};
+
+enum br2684_payload {
+	p_routed = BR2684_PAYLOAD_ROUTED,
+	p_bridged = BR2684_PAYLOAD_BRIDGED,
+};
+
+#define BR2684_SETFILT	_IOW( 'a', ATMIOC_BACKEND + 0, \
+				struct br2684_filter_set)
+
+#endif /* _LINUX_ATMBR2684_H */
diff --git a/include/linux/atmclip.h b/include/linux/atmclip.h
new file mode 100644
index 00000000..02c94c44
--- /dev/null
+++ b/include/linux/atmclip.h
@@ -0,0 +1,21 @@
+/* atmclip.h - Classical IP over ATM */
+ 
+/* Written 1995-1998 by Werner Almesberger, EPFL LRC/ICA */
+ 
+
+#ifndef LINUX_ATMCLIP_H
+#define LINUX_ATMCLIP_H
+
+#include <linux/sockios.h>
+#include <linux/atmioc.h>
+
+
+#define RFC1483LLC_LEN	8		/* LLC+OUI+PID = 8 */
+#define RFC1626_MTU	9180		/* RFC1626 default MTU */
+
+#define CLIP_DEFAULT_IDLETIMER 1200	/* 20 minutes, see RFC1755 */
+#define CLIP_CHECK_INTERVAL	 10	/* check every ten seconds */
+
+#define	SIOCMKCLIP	_IO('a',ATMIOC_CLIP)	/* create IP interface */
+
+#endif
diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h
new file mode 100644
index 00000000..06fd4bbc
--- /dev/null
+++ b/include/linux/atmdev.h
@@ -0,0 +1,526 @@
+/* atmdev.h - ATM device driver declarations and various related items */
+ 
+/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
+ 
+
+#ifndef LINUX_ATMDEV_H
+#define LINUX_ATMDEV_H
+
+
+#include <linux/atmapi.h>
+#include <linux/atm.h>
+#include <linux/atmioc.h>
+
+
+#define ESI_LEN		6
+
+#define ATM_OC3_PCR	(155520000/270*260/8/53)
+			/* OC3 link rate:  155520000 bps
+			   SONET overhead: /270*260 (9 section, 1 path)
+			   bits per cell:  /8/53
+			   max cell rate:  353207.547 cells/sec */
+#define ATM_25_PCR	((25600000/8-8000)/54)
+			/* 25 Mbps ATM cell rate (59111) */
+#define ATM_OC12_PCR	(622080000/1080*1040/8/53)
+			/* OC12 link rate: 622080000 bps
+			   SONET overhead: /1080*1040
+			   bits per cell:  /8/53
+			   max cell rate:  1412830.188 cells/sec */
+#define ATM_DS3_PCR	(8000*12)
+			/* DS3: 12 cells in a 125 usec time slot */
+
+
+#define __AAL_STAT_ITEMS \
+    __HANDLE_ITEM(tx);			/* TX okay */ \
+    __HANDLE_ITEM(tx_err);		/* TX errors */ \
+    __HANDLE_ITEM(rx);			/* RX okay */ \
+    __HANDLE_ITEM(rx_err);		/* RX errors */ \
+    __HANDLE_ITEM(rx_drop);		/* RX out of memory */
+
+struct atm_aal_stats {
+#define __HANDLE_ITEM(i) int i
+	__AAL_STAT_ITEMS
+#undef __HANDLE_ITEM
+};
+
+
+struct atm_dev_stats {
+	struct atm_aal_stats aal0;
+	struct atm_aal_stats aal34;
+	struct atm_aal_stats aal5;
+} __ATM_API_ALIGN;
+
+
+#define ATM_GETLINKRATE	_IOW('a',ATMIOC_ITF+1,struct atmif_sioc)
+					/* get link rate */
+#define ATM_GETNAMES	_IOW('a',ATMIOC_ITF+3,struct atm_iobuf)
+					/* get interface names (numbers) */
+#define ATM_GETTYPE	_IOW('a',ATMIOC_ITF+4,struct atmif_sioc)
+					/* get interface type name */
+#define ATM_GETESI	_IOW('a',ATMIOC_ITF+5,struct atmif_sioc)
+					/* get interface ESI */
+#define ATM_GETADDR	_IOW('a',ATMIOC_ITF+6,struct atmif_sioc)
+					/* get itf's local ATM addr. list */
+#define ATM_RSTADDR	_IOW('a',ATMIOC_ITF+7,struct atmif_sioc)
+					/* reset itf's ATM address list */
+#define ATM_ADDADDR	_IOW('a',ATMIOC_ITF+8,struct atmif_sioc)
+					/* add a local ATM address */
+#define ATM_DELADDR	_IOW('a',ATMIOC_ITF+9,struct atmif_sioc)
+					/* remove a local ATM address */
+#define ATM_GETCIRANGE	_IOW('a',ATMIOC_ITF+10,struct atmif_sioc)
+					/* get connection identifier range */
+#define ATM_SETCIRANGE	_IOW('a',ATMIOC_ITF+11,struct atmif_sioc)
+					/* set connection identifier range */
+#define ATM_SETESI	_IOW('a',ATMIOC_ITF+12,struct atmif_sioc)
+					/* set interface ESI */
+#define ATM_SETESIF	_IOW('a',ATMIOC_ITF+13,struct atmif_sioc)
+					/* force interface ESI */
+#define ATM_ADDLECSADDR	_IOW('a', ATMIOC_ITF+14, struct atmif_sioc)
+					/* register a LECS address */
+#define ATM_DELLECSADDR	_IOW('a', ATMIOC_ITF+15, struct atmif_sioc)
+					/* unregister a LECS address */
+#define ATM_GETLECSADDR	_IOW('a', ATMIOC_ITF+16, struct atmif_sioc)
+					/* retrieve LECS address(es) */
+
+#define ATM_GETSTAT	_IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc)
+					/* get AAL layer statistics */
+#define ATM_GETSTATZ	_IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc)
+					/* get AAL layer statistics and zero */
+#define ATM_GETLOOP	_IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc)
+					/* get loopback mode */
+#define ATM_SETLOOP	_IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc)
+					/* set loopback mode */
+#define ATM_QUERYLOOP	_IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc)
+					/* query supported loopback modes */
+#define ATM_SETSC	_IOW('a',ATMIOC_SPECIAL+1,int)
+					/* enable or disable single-copy */
+#define ATM_SETBACKEND	_IOW('a',ATMIOC_SPECIAL+2,atm_backend_t)
+					/* set backend handler */
+#define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t)
+					/* use backend to make new if */
+#define ATM_ADDPARTY  	_IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf)
+ 					/* add party to p2mp call */
+#ifdef CONFIG_COMPAT
+/* It actually takes struct sockaddr_atmsvc, not struct atm_iobuf */
+#define COMPAT_ATM_ADDPARTY  	_IOW('a', ATMIOC_SPECIAL+4,struct compat_atm_iobuf)
+#endif
+#define ATM_DROPPARTY 	_IOW('a', ATMIOC_SPECIAL+5,int)
+					/* drop party from p2mp call */
+
+/*
+ * These are backend handkers that can be set via the ATM_SETBACKEND call
+ * above.  In the future we may support dynamic loading of these - for now,
+ * they're just being used to share the ATMIOC_BACKEND ioctls
+ */
+#define ATM_BACKEND_RAW		0	
+#define ATM_BACKEND_PPP		1	/* PPPoATM - RFC2364 */
+#define ATM_BACKEND_BR2684	2	/* Bridged RFC1483/2684 */
+
+/* for ATM_GETTYPE */
+#define ATM_ITFTYP_LEN	8	/* maximum length of interface type name */
+
+/*
+ * Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP
+ */
+
+/* Point of loopback				CPU-->SAR-->PHY-->line--> ... */
+#define __ATM_LM_NONE	0	/* no loop back     ^     ^     ^      ^      */
+#define __ATM_LM_AAL	1	/* loop back PDUs --'     |     |      |      */
+#define __ATM_LM_ATM	2	/* loop back ATM cells ---'     |      |      */
+/* RESERVED		4	loop back on PHY side  ---'		      */
+#define __ATM_LM_PHY	8	/* loop back bits (digital) ----'      |      */
+#define __ATM_LM_ANALOG 16	/* loop back the analog signal --------'      */
+
+/* Direction of loopback */
+#define __ATM_LM_MKLOC(n)	((n))	    /* Local (i.e. loop TX to RX) */
+#define __ATM_LM_MKRMT(n)	((n) << 8)  /* Remote (i.e. loop RX to TX) */
+
+#define __ATM_LM_XTLOC(n)	((n) & 0xff)
+#define __ATM_LM_XTRMT(n)	(((n) >> 8) & 0xff)
+
+#define ATM_LM_NONE	0	/* no loopback */
+
+#define ATM_LM_LOC_AAL	__ATM_LM_MKLOC(__ATM_LM_AAL)
+#define ATM_LM_LOC_ATM	__ATM_LM_MKLOC(__ATM_LM_ATM)
+#define ATM_LM_LOC_PHY	__ATM_LM_MKLOC(__ATM_LM_PHY)
+#define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG)
+
+#define ATM_LM_RMT_AAL	__ATM_LM_MKRMT(__ATM_LM_AAL)
+#define ATM_LM_RMT_ATM	__ATM_LM_MKRMT(__ATM_LM_ATM)
+#define ATM_LM_RMT_PHY	__ATM_LM_MKRMT(__ATM_LM_PHY)
+#define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG)
+
+/*
+ * Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that
+ * __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x)
+ */
+
+
+struct atm_iobuf {
+	int length;
+	void __user *buffer;
+};
+
+/* for ATM_GETCIRANGE / ATM_SETCIRANGE */
+
+#define ATM_CI_MAX      -1              /* use maximum range of VPI/VCI */
+ 
+struct atm_cirange {
+	signed char	vpi_bits;	/* 1..8, ATM_CI_MAX (-1) for maximum */
+	signed char	vci_bits;	/* 1..16, ATM_CI_MAX (-1) for maximum */
+};
+
+/* for ATM_SETSC; actually taken from the ATM_VF number space */
+
+#define ATM_SC_RX	1024		/* enable RX single-copy */
+#define ATM_SC_TX	2048		/* enable TX single-copy */
+
+#define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out
+				  anyway */
+
+/* MF: change_qos (Modify) flags */
+
+#define ATM_MF_IMMED	 1	/* Block until change is effective */
+#define ATM_MF_INC_RSV	 2	/* Change reservation on increase */
+#define ATM_MF_INC_SHP	 4	/* Change shaping on increase */
+#define ATM_MF_DEC_RSV	 8	/* Change reservation on decrease */
+#define ATM_MF_DEC_SHP	16	/* Change shaping on decrease */
+#define ATM_MF_BWD	32	/* Set the backward direction parameters */
+
+#define ATM_MF_SET	(ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \
+			  ATM_MF_DEC_SHP | ATM_MF_BWD)
+
+/*
+ * ATM_VS_* are used to express VC state in a human-friendly way.
+ */
+
+#define ATM_VS_IDLE	0	/* VC is not used */
+#define ATM_VS_CONNECTED 1	/* VC is connected */
+#define ATM_VS_CLOSING	2	/* VC is closing */
+#define ATM_VS_LISTEN	3	/* VC is listening for incoming setups */
+#define ATM_VS_INUSE	4	/* VC is in use (registered with atmsigd) */
+#define ATM_VS_BOUND	5	/* VC is bound */
+
+#define ATM_VS2TXT_MAP \
+    "IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND"
+
+#define ATM_VF2TXT_MAP \
+    "ADDR",	"READY",	"PARTIAL",	"REGIS", \
+    "RELEASED", "HASQOS",	"LISTEN",	"META", \
+    "256",	"512",		"1024",		"2048", \
+    "SESSION",	"HASSAP",	"BOUND",	"CLOSE"
+
+
+#ifdef __KERNEL__
+
+#include <linux/wait.h> /* wait_queue_head_t */
+#include <linux/time.h> /* struct timeval */
+#include <linux/net.h>
+#include <linux/bug.h>
+#include <linux/skbuff.h> /* struct sk_buff */
+#include <linux/uio.h>
+#include <net/sock.h>
+#include <linux/atomic.h>
+
+#ifdef CONFIG_PROC_FS
+#include <linux/proc_fs.h>
+
+extern struct proc_dir_entry *atm_proc_root;
+#endif
+
+#ifdef CONFIG_COMPAT
+#include <linux/compat.h>
+struct compat_atm_iobuf {
+	int length;
+	compat_uptr_t buffer;
+};
+#endif
+
+struct k_atm_aal_stats {
+#define __HANDLE_ITEM(i) atomic_t i
+	__AAL_STAT_ITEMS
+#undef __HANDLE_ITEM
+};
+
+
+struct k_atm_dev_stats {
+	struct k_atm_aal_stats aal0;
+	struct k_atm_aal_stats aal34;
+	struct k_atm_aal_stats aal5;
+};
+
+struct device;
+
+enum {
+	ATM_VF_ADDR,		/* Address is in use. Set by anybody, cleared
+				   by device driver. */
+	ATM_VF_READY,		/* VC is ready to transfer data. Set by device
+				   driver, cleared by anybody. */
+	ATM_VF_PARTIAL,		/* resources are bound to PVC (partial PVC
+				   setup), controlled by socket layer */
+	ATM_VF_REGIS,		/* registered with demon, controlled by SVC
+				   socket layer */
+	ATM_VF_BOUND,		/* local SAP is set, controlled by SVC socket
+				   layer */
+	ATM_VF_RELEASED,	/* demon has indicated/requested release,
+				   controlled by SVC socket layer */
+	ATM_VF_HASQOS,		/* QOS parameters have been set */
+	ATM_VF_LISTEN,		/* socket is used for listening */
+	ATM_VF_META,		/* SVC socket isn't used for normal data
+				   traffic and doesn't depend on signaling
+				   to be available */
+	ATM_VF_SESSION,		/* VCC is p2mp session control descriptor */
+	ATM_VF_HASSAP,		/* SAP has been set */
+	ATM_VF_CLOSE,		/* asynchronous close - treat like VF_RELEASED*/
+	ATM_VF_WAITING,		/* waiting for reply from sigd */
+	ATM_VF_IS_CLIP,		/* in use by CLIP protocol */
+};
+
+
+#define ATM_VF2VS(flags) \
+    (test_bit(ATM_VF_READY,&(flags)) ? ATM_VS_CONNECTED : \
+     test_bit(ATM_VF_RELEASED,&(flags)) ? ATM_VS_CLOSING : \
+     test_bit(ATM_VF_LISTEN,&(flags)) ? ATM_VS_LISTEN : \
+     test_bit(ATM_VF_REGIS,&(flags)) ? ATM_VS_INUSE : \
+     test_bit(ATM_VF_BOUND,&(flags)) ? ATM_VS_BOUND : ATM_VS_IDLE)
+
+
+enum {
+	ATM_DF_REMOVED,		/* device was removed from atm_devs list */
+};
+
+
+#define ATM_PHY_SIG_LOST    0	/* no carrier/light */
+#define ATM_PHY_SIG_UNKNOWN 1	/* carrier/light status is unknown */
+#define ATM_PHY_SIG_FOUND   2	/* carrier/light okay */
+
+#define ATM_ATMOPT_CLP	1	/* set CLP bit */
+
+struct atm_vcc {
+	/* struct sock has to be the first member of atm_vcc */
+	struct sock	sk;
+	unsigned long	flags;		/* VCC flags (ATM_VF_*) */
+	short		vpi;		/* VPI and VCI (types must be equal */
+					/* with sockaddr) */
+	int 		vci;
+	unsigned long	aal_options;	/* AAL layer options */
+	unsigned long	atm_options;	/* ATM layer options */
+	struct atm_dev	*dev;		/* device back pointer */
+	struct atm_qos	qos;		/* QOS */
+	struct atm_sap	sap;		/* SAP */
+	void (*push)(struct atm_vcc *vcc,struct sk_buff *skb);
+	void (*pop)(struct atm_vcc *vcc,struct sk_buff *skb); /* optional */
+	int (*push_oam)(struct atm_vcc *vcc,void *cell);
+	int (*send)(struct atm_vcc *vcc,struct sk_buff *skb);
+	void		*dev_data;	/* per-device data */
+	void		*proto_data;	/* per-protocol data */
+	struct k_atm_aal_stats *stats;	/* pointer to AAL stats group */
+	/* SVC part --- may move later ------------------------------------- */
+	short		itf;		/* interface number */
+	struct sockaddr_atmsvc local;
+	struct sockaddr_atmsvc remote;
+	/* Multipoint part ------------------------------------------------- */
+	struct atm_vcc	*session;	/* session VCC descriptor */
+	/* Other stuff ----------------------------------------------------- */
+	void		*user_back;	/* user backlink - not touched by */
+					/* native ATM stack. Currently used */
+					/* by CLIP and sch_atm. */
+};
+
+static inline struct atm_vcc *atm_sk(struct sock *sk)
+{
+	return (struct atm_vcc *)sk;
+}
+
+static inline struct atm_vcc *ATM_SD(struct socket *sock)
+{
+	return atm_sk(sock->sk);
+}
+
+static inline struct sock *sk_atm(struct atm_vcc *vcc)
+{
+	return (struct sock *)vcc;
+}
+
+struct atm_dev_addr {
+	struct sockaddr_atmsvc addr;	/* ATM address */
+	struct list_head entry;		/* next address */
+};
+
+enum atm_addr_type_t { ATM_ADDR_LOCAL, ATM_ADDR_LECS };
+
+struct atm_dev {
+	const struct atmdev_ops *ops;	/* device operations; NULL if unused */
+	const struct atmphy_ops *phy;	/* PHY operations, may be undefined */
+					/* (NULL) */
+	const char	*type;		/* device type name */
+	int		number;		/* device index */
+	void		*dev_data;	/* per-device data */
+	void		*phy_data;	/* private PHY date */
+	unsigned long	flags;		/* device flags (ATM_DF_*) */
+	struct list_head local;		/* local ATM addresses */
+	struct list_head lecs;		/* LECS ATM addresses learned via ILMI */
+	unsigned char	esi[ESI_LEN];	/* ESI ("MAC" addr) */
+	struct atm_cirange ci_range;	/* VPI/VCI range */
+	struct k_atm_dev_stats stats;	/* statistics */
+	char		signal;		/* signal status (ATM_PHY_SIG_*) */
+	int		link_rate;	/* link rate (default: OC3) */
+	atomic_t	refcnt;		/* reference count */
+	spinlock_t	lock;		/* protect internal members */
+#ifdef CONFIG_PROC_FS
+	struct proc_dir_entry *proc_entry; /* proc entry */
+	char *proc_name;		/* proc entry name */
+#endif
+	struct device class_dev;	/* sysfs device */
+	struct list_head dev_list;	/* linkage */
+};
+
+ 
+/* OF: send_Oam Flags */
+
+#define ATM_OF_IMMED  1		/* Attempt immediate delivery */
+#define ATM_OF_INRATE 2		/* Attempt in-rate delivery */
+
+
+/*
+ * ioctl, getsockopt, and setsockopt are optional and can be set to NULL.
+ */
+
+struct atmdev_ops { /* only send is required */
+	void (*dev_close)(struct atm_dev *dev);
+	int (*open)(struct atm_vcc *vcc);
+	void (*close)(struct atm_vcc *vcc);
+	int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void __user *arg);
+#ifdef CONFIG_COMPAT
+	int (*compat_ioctl)(struct atm_dev *dev,unsigned int cmd,
+			    void __user *arg);
+#endif
+	int (*getsockopt)(struct atm_vcc *vcc,int level,int optname,
+	    void __user *optval,int optlen);
+	int (*setsockopt)(struct atm_vcc *vcc,int level,int optname,
+	    void __user *optval,unsigned int optlen);
+	int (*send)(struct atm_vcc *vcc,struct sk_buff *skb);
+	int (*send_oam)(struct atm_vcc *vcc,void *cell,int flags);
+	void (*phy_put)(struct atm_dev *dev,unsigned char value,
+	    unsigned long addr);
+	unsigned char (*phy_get)(struct atm_dev *dev,unsigned long addr);
+	int (*change_qos)(struct atm_vcc *vcc,struct atm_qos *qos,int flags);
+	int (*proc_read)(struct atm_dev *dev,loff_t *pos,char *page);
+	struct module *owner;
+};
+
+struct atmphy_ops {
+	int (*start)(struct atm_dev *dev);
+	int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void __user *arg);
+	void (*interrupt)(struct atm_dev *dev);
+	int (*stop)(struct atm_dev *dev);
+};
+
+struct atm_skb_data {
+	struct atm_vcc	*vcc;		/* ATM VCC */
+	unsigned long	atm_options;	/* ATM layer options */
+};
+
+#define VCC_HTABLE_SIZE 32
+
+extern struct hlist_head vcc_hash[VCC_HTABLE_SIZE];
+extern rwlock_t vcc_sklist_lock;
+
+#define ATM_SKB(skb) (((struct atm_skb_data *) (skb)->cb))
+
+struct atm_dev *atm_dev_register(const char *type, struct device *parent,
+				 const struct atmdev_ops *ops,
+				 int number, /* -1 == pick first available */
+				 unsigned long *flags);
+struct atm_dev *atm_dev_lookup(int number);
+void atm_dev_deregister(struct atm_dev *dev);
+
+/* atm_dev_signal_change
+ *
+ * Propagate lower layer signal change in atm_dev->signal to netdevice.
+ * The event will be sent via a notifier call chain.
+ */
+void atm_dev_signal_change(struct atm_dev *dev, char signal);
+
+void vcc_insert_socket(struct sock *sk);
+
+void atm_dev_release_vccs(struct atm_dev *dev);
+
+
+static inline void atm_force_charge(struct atm_vcc *vcc,int truesize)
+{
+	atomic_add(truesize, &sk_atm(vcc)->sk_rmem_alloc);
+}
+
+
+static inline void atm_return(struct atm_vcc *vcc,int truesize)
+{
+	atomic_sub(truesize, &sk_atm(vcc)->sk_rmem_alloc);
+}
+
+
+static inline int atm_may_send(struct atm_vcc *vcc,unsigned int size)
+{
+	return (size + atomic_read(&sk_atm(vcc)->sk_wmem_alloc)) <
+	       sk_atm(vcc)->sk_sndbuf;
+}
+
+
+static inline void atm_dev_hold(struct atm_dev *dev)
+{
+	atomic_inc(&dev->refcnt);
+}
+
+
+static inline void atm_dev_put(struct atm_dev *dev)
+{
+	if (atomic_dec_and_test(&dev->refcnt)) {
+		BUG_ON(!test_bit(ATM_DF_REMOVED, &dev->flags));
+		if (dev->ops->dev_close)
+			dev->ops->dev_close(dev);
+		put_device(&dev->class_dev);
+	}
+}
+
+
+int atm_charge(struct atm_vcc *vcc,int truesize);
+struct sk_buff *atm_alloc_charge(struct atm_vcc *vcc,int pdu_size,
+    gfp_t gfp_flags);
+int atm_pcr_goal(const struct atm_trafprm *tp);
+
+void vcc_release_async(struct atm_vcc *vcc, int reply);
+
+struct atm_ioctl {
+	struct module *owner;
+	/* A module reference is kept if appropriate over this call.
+	 * Return -ENOIOCTLCMD if you don't handle it. */
+	int (*ioctl)(struct socket *, unsigned int cmd, unsigned long arg);
+	struct list_head list;
+};
+
+/**
+ * register_atm_ioctl - register handler for ioctl operations
+ *
+ * Special (non-device) handlers of ioctl's should
+ * register here. If you're a normal device, you should
+ * set .ioctl in your atmdev_ops instead.
+ */
+void register_atm_ioctl(struct atm_ioctl *);
+
+/**
+ * deregister_atm_ioctl - remove the ioctl handler
+ */
+void deregister_atm_ioctl(struct atm_ioctl *);
+
+
+/* register_atmdevice_notifier - register atm_dev notify events
+ *
+ * Clients like br2684 will register notify events
+ * Currently we notify of signal found/lost
+ */
+int register_atmdevice_notifier(struct notifier_block *nb);
+void unregister_atmdevice_notifier(struct notifier_block *nb);
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/linux/atmel-mci.h b/include/linux/atmel-mci.h
new file mode 100644
index 00000000..4c7a4b21
--- /dev/null
+++ b/include/linux/atmel-mci.h
@@ -0,0 +1,39 @@
+#ifndef __LINUX_ATMEL_MCI_H
+#define __LINUX_ATMEL_MCI_H
+
+#define ATMCI_MAX_NR_SLOTS	2
+
+/**
+ * struct mci_slot_pdata - board-specific per-slot configuration
+ * @bus_width: Number of data lines wired up the slot
+ * @detect_pin: GPIO pin wired to the card detect switch
+ * @wp_pin: GPIO pin wired to the write protect sensor
+ * @detect_is_active_high: The state of the detect pin when it is active
+ *
+ * If a given slot is not present on the board, @bus_width should be
+ * set to 0. The other fields are ignored in this case.
+ *
+ * Any pins that aren't available should be set to a negative value.
+ *
+ * Note that support for multiple slots is experimental -- some cards
+ * might get upset if we don't get the clock management exactly right.
+ * But in most cases, it should work just fine.
+ */
+struct mci_slot_pdata {
+	unsigned int		bus_width;
+	int			detect_pin;
+	int			wp_pin;
+	bool			detect_is_active_high;
+};
+
+/**
+ * struct mci_platform_data - board-specific MMC/SDcard configuration
+ * @dma_slave: DMA slave interface to use in data transfers.
+ * @slot: Per-slot configuration data.
+ */
+struct mci_platform_data {
+	struct mci_dma_data	*dma_slave;
+	struct mci_slot_pdata	slot[ATMCI_MAX_NR_SLOTS];
+};
+
+#endif /* __LINUX_ATMEL_MCI_H */
diff --git a/include/linux/atmel-pwm-bl.h b/include/linux/atmel-pwm-bl.h
new file mode 100644
index 00000000..0153a478
--- /dev/null
+++ b/include/linux/atmel-pwm-bl.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * Driver for the AT32AP700X PS/2 controller (PSIF).
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef __INCLUDE_ATMEL_PWM_BL_H
+#define __INCLUDE_ATMEL_PWM_BL_H
+
+/**
+ * struct atmel_pwm_bl_platform_data
+ * @pwm_channel: which PWM channel in the PWM module to use.
+ * @pwm_frequency: PWM frequency to generate, the driver will try to be as
+ *	close as the prescaler allows.
+ * @pwm_compare_max: value to use in the PWM channel compare register.
+ * @pwm_duty_max: maximum duty cycle value, must be less than or equal to
+ *	pwm_compare_max.
+ * @pwm_duty_min: minimum duty cycle value, must be less than pwm_duty_max.
+ * @pwm_active_low: set to one if the low part of the PWM signal increases the
+ *	brightness of the backlight.
+ * @gpio_on: GPIO line to control the backlight on/off, set to -1 if not used.
+ * @on_active_low: set to one if the on/off signal is on when GPIO is low.
+ *
+ * This struct must be added to the platform device in the board code. It is
+ * used by the atmel-pwm-bl driver to setup the GPIO to control on/off and the
+ * PWM device.
+ */
+struct atmel_pwm_bl_platform_data {
+	unsigned int pwm_channel;
+	unsigned int pwm_frequency;
+	unsigned int pwm_compare_max;
+	unsigned int pwm_duty_max;
+	unsigned int pwm_duty_min;
+	unsigned int pwm_active_low;
+	int gpio_on;
+	unsigned int on_active_low;
+};
+
+#endif /* __INCLUDE_ATMEL_PWM_BL_H */
diff --git a/include/linux/atmel-ssc.h b/include/linux/atmel-ssc.h
new file mode 100644
index 00000000..06023393
--- /dev/null
+++ b/include/linux/atmel-ssc.h
@@ -0,0 +1,312 @@
+#ifndef __INCLUDE_ATMEL_SSC_H
+#define __INCLUDE_ATMEL_SSC_H
+
+#include <linux/platform_device.h>
+#include <linux/list.h>
+
+struct ssc_device {
+	struct list_head	list;
+	void __iomem		*regs;
+	struct platform_device	*pdev;
+	struct clk		*clk;
+	int			user;
+	int			irq;
+};
+
+struct ssc_device * __must_check ssc_request(unsigned int ssc_num);
+void ssc_free(struct ssc_device *ssc);
+
+/* SSC register offsets */
+
+/* SSC Control Register */
+#define SSC_CR				0x00000000
+#define SSC_CR_RXDIS_SIZE			 1
+#define SSC_CR_RXDIS_OFFSET			 1
+#define SSC_CR_RXEN_SIZE			 1
+#define SSC_CR_RXEN_OFFSET			 0
+#define SSC_CR_SWRST_SIZE			 1
+#define SSC_CR_SWRST_OFFSET			15
+#define SSC_CR_TXDIS_SIZE			 1
+#define SSC_CR_TXDIS_OFFSET			 9
+#define SSC_CR_TXEN_SIZE			 1
+#define SSC_CR_TXEN_OFFSET			 8
+
+/* SSC Clock Mode Register */
+#define SSC_CMR				0x00000004
+#define SSC_CMR_DIV_SIZE			12
+#define SSC_CMR_DIV_OFFSET			 0
+
+/* SSC Receive Clock Mode Register */
+#define SSC_RCMR			0x00000010
+#define SSC_RCMR_CKG_SIZE			 2
+#define SSC_RCMR_CKG_OFFSET			 6
+#define SSC_RCMR_CKI_SIZE			 1
+#define SSC_RCMR_CKI_OFFSET			 5
+#define SSC_RCMR_CKO_SIZE			 3
+#define SSC_RCMR_CKO_OFFSET			 2
+#define SSC_RCMR_CKS_SIZE			 2
+#define SSC_RCMR_CKS_OFFSET			 0
+#define SSC_RCMR_PERIOD_SIZE			 8
+#define SSC_RCMR_PERIOD_OFFSET			24
+#define SSC_RCMR_START_SIZE			 4
+#define SSC_RCMR_START_OFFSET			 8
+#define SSC_RCMR_STOP_SIZE			 1
+#define SSC_RCMR_STOP_OFFSET			12
+#define SSC_RCMR_STTDLY_SIZE			 8
+#define SSC_RCMR_STTDLY_OFFSET			16
+
+/* SSC Receive Frame Mode Register */
+#define SSC_RFMR			0x00000014
+#define SSC_RFMR_DATLEN_SIZE			 5
+#define SSC_RFMR_DATLEN_OFFSET			 0
+#define SSC_RFMR_DATNB_SIZE			 4
+#define SSC_RFMR_DATNB_OFFSET			 8
+#define SSC_RFMR_FSEDGE_SIZE			 1
+#define SSC_RFMR_FSEDGE_OFFSET			24
+#define SSC_RFMR_FSLEN_SIZE			 4
+#define SSC_RFMR_FSLEN_OFFSET			16
+#define SSC_RFMR_FSOS_SIZE			 4
+#define SSC_RFMR_FSOS_OFFSET			20
+#define SSC_RFMR_LOOP_SIZE			 1
+#define SSC_RFMR_LOOP_OFFSET			 5
+#define SSC_RFMR_MSBF_SIZE			 1
+#define SSC_RFMR_MSBF_OFFSET			 7
+
+/* SSC Transmit Clock Mode Register */
+#define SSC_TCMR			0x00000018
+#define SSC_TCMR_CKG_SIZE			 2
+#define SSC_TCMR_CKG_OFFSET			 6
+#define SSC_TCMR_CKI_SIZE			 1
+#define SSC_TCMR_CKI_OFFSET			 5
+#define SSC_TCMR_CKO_SIZE			 3
+#define SSC_TCMR_CKO_OFFSET			 2
+#define SSC_TCMR_CKS_SIZE			 2
+#define SSC_TCMR_CKS_OFFSET			 0
+#define SSC_TCMR_PERIOD_SIZE			 8
+#define SSC_TCMR_PERIOD_OFFSET			24
+#define SSC_TCMR_START_SIZE			 4
+#define SSC_TCMR_START_OFFSET			 8
+#define SSC_TCMR_STTDLY_SIZE			 8
+#define SSC_TCMR_STTDLY_OFFSET			16
+
+/* SSC Transmit Frame Mode Register */
+#define SSC_TFMR			0x0000001c
+#define SSC_TFMR_DATDEF_SIZE			 1
+#define SSC_TFMR_DATDEF_OFFSET			 5
+#define SSC_TFMR_DATLEN_SIZE			 5
+#define SSC_TFMR_DATLEN_OFFSET			 0
+#define SSC_TFMR_DATNB_SIZE			 4
+#define SSC_TFMR_DATNB_OFFSET			 8
+#define SSC_TFMR_FSDEN_SIZE			 1
+#define SSC_TFMR_FSDEN_OFFSET			23
+#define SSC_TFMR_FSEDGE_SIZE			 1
+#define SSC_TFMR_FSEDGE_OFFSET			24
+#define SSC_TFMR_FSLEN_SIZE			 4
+#define SSC_TFMR_FSLEN_OFFSET			16
+#define SSC_TFMR_FSOS_SIZE			 3
+#define SSC_TFMR_FSOS_OFFSET			20
+#define SSC_TFMR_MSBF_SIZE			 1
+#define SSC_TFMR_MSBF_OFFSET			 7
+
+/* SSC Receive Hold Register */
+#define SSC_RHR				0x00000020
+#define SSC_RHR_RDAT_SIZE			32
+#define SSC_RHR_RDAT_OFFSET			 0
+
+/* SSC Transmit Hold Register */
+#define SSC_THR				0x00000024
+#define SSC_THR_TDAT_SIZE			32
+#define SSC_THR_TDAT_OFFSET			 0
+
+/* SSC Receive Sync. Holding Register */
+#define SSC_RSHR			0x00000030
+#define SSC_RSHR_RSDAT_SIZE			16
+#define SSC_RSHR_RSDAT_OFFSET			 0
+
+/* SSC Transmit Sync. Holding Register */
+#define SSC_TSHR			0x00000034
+#define SSC_TSHR_TSDAT_SIZE			16
+#define SSC_TSHR_RSDAT_OFFSET			 0
+
+/* SSC Receive Compare 0 Register */
+#define SSC_RC0R			0x00000038
+#define SSC_RC0R_CP0_SIZE			16
+#define SSC_RC0R_CP0_OFFSET			 0
+
+/* SSC Receive Compare 1 Register */
+#define SSC_RC1R			0x0000003c
+#define SSC_RC1R_CP1_SIZE			16
+#define SSC_RC1R_CP1_OFFSET			 0
+
+/* SSC Status Register */
+#define SSC_SR				0x00000040
+#define SSC_SR_CP0_SIZE				 1
+#define SSC_SR_CP0_OFFSET			 8
+#define SSC_SR_CP1_SIZE				 1
+#define SSC_SR_CP1_OFFSET			 9
+#define SSC_SR_ENDRX_SIZE			 1
+#define SSC_SR_ENDRX_OFFSET			 6
+#define SSC_SR_ENDTX_SIZE			 1
+#define SSC_SR_ENDTX_OFFSET			 2
+#define SSC_SR_OVRUN_SIZE			 1
+#define SSC_SR_OVRUN_OFFSET			 5
+#define SSC_SR_RXBUFF_SIZE			 1
+#define SSC_SR_RXBUFF_OFFSET			 7
+#define SSC_SR_RXEN_SIZE			 1
+#define SSC_SR_RXEN_OFFSET			17
+#define SSC_SR_RXRDY_SIZE			 1
+#define SSC_SR_RXRDY_OFFSET			 4
+#define SSC_SR_RXSYN_SIZE			 1
+#define SSC_SR_RXSYN_OFFSET			11
+#define SSC_SR_TXBUFE_SIZE			 1
+#define SSC_SR_TXBUFE_OFFSET			 3
+#define SSC_SR_TXEMPTY_SIZE			 1
+#define SSC_SR_TXEMPTY_OFFSET			 1
+#define SSC_SR_TXEN_SIZE			 1
+#define SSC_SR_TXEN_OFFSET			16
+#define SSC_SR_TXRDY_SIZE			 1
+#define SSC_SR_TXRDY_OFFSET			 0
+#define SSC_SR_TXSYN_SIZE			 1
+#define SSC_SR_TXSYN_OFFSET			10
+
+/* SSC Interrupt Enable Register */
+#define SSC_IER				0x00000044
+#define SSC_IER_CP0_SIZE			 1
+#define SSC_IER_CP0_OFFSET			 8
+#define SSC_IER_CP1_SIZE			 1
+#define SSC_IER_CP1_OFFSET			 9
+#define SSC_IER_ENDRX_SIZE			 1
+#define SSC_IER_ENDRX_OFFSET			 6
+#define SSC_IER_ENDTX_SIZE			 1
+#define SSC_IER_ENDTX_OFFSET			 2
+#define SSC_IER_OVRUN_SIZE			 1
+#define SSC_IER_OVRUN_OFFSET			 5
+#define SSC_IER_RXBUFF_SIZE			 1
+#define SSC_IER_RXBUFF_OFFSET			 7
+#define SSC_IER_RXRDY_SIZE			 1
+#define SSC_IER_RXRDY_OFFSET			 4
+#define SSC_IER_RXSYN_SIZE			 1
+#define SSC_IER_RXSYN_OFFSET			11
+#define SSC_IER_TXBUFE_SIZE			 1
+#define SSC_IER_TXBUFE_OFFSET			 3
+#define SSC_IER_TXEMPTY_SIZE			 1
+#define SSC_IER_TXEMPTY_OFFSET			 1
+#define SSC_IER_TXRDY_SIZE			 1
+#define SSC_IER_TXRDY_OFFSET			 0
+#define SSC_IER_TXSYN_SIZE			 1
+#define SSC_IER_TXSYN_OFFSET			10
+
+/* SSC Interrupt Disable Register */
+#define SSC_IDR				0x00000048
+#define SSC_IDR_CP0_SIZE			 1
+#define SSC_IDR_CP0_OFFSET			 8
+#define SSC_IDR_CP1_SIZE			 1
+#define SSC_IDR_CP1_OFFSET			 9
+#define SSC_IDR_ENDRX_SIZE			 1
+#define SSC_IDR_ENDRX_OFFSET			 6
+#define SSC_IDR_ENDTX_SIZE			 1
+#define SSC_IDR_ENDTX_OFFSET			 2
+#define SSC_IDR_OVRUN_SIZE			 1
+#define SSC_IDR_OVRUN_OFFSET			 5
+#define SSC_IDR_RXBUFF_SIZE			 1
+#define SSC_IDR_RXBUFF_OFFSET			 7
+#define SSC_IDR_RXRDY_SIZE			 1
+#define SSC_IDR_RXRDY_OFFSET			 4
+#define SSC_IDR_RXSYN_SIZE			 1
+#define SSC_IDR_RXSYN_OFFSET			11
+#define SSC_IDR_TXBUFE_SIZE			 1
+#define SSC_IDR_TXBUFE_OFFSET			 3
+#define SSC_IDR_TXEMPTY_SIZE			 1
+#define SSC_IDR_TXEMPTY_OFFSET			 1
+#define SSC_IDR_TXRDY_SIZE			 1
+#define SSC_IDR_TXRDY_OFFSET			 0
+#define SSC_IDR_TXSYN_SIZE			 1
+#define SSC_IDR_TXSYN_OFFSET			10
+
+/* SSC Interrupt Mask Register */
+#define SSC_IMR				0x0000004c
+#define SSC_IMR_CP0_SIZE			 1
+#define SSC_IMR_CP0_OFFSET			 8
+#define SSC_IMR_CP1_SIZE			 1
+#define SSC_IMR_CP1_OFFSET			 9
+#define SSC_IMR_ENDRX_SIZE			 1
+#define SSC_IMR_ENDRX_OFFSET			 6
+#define SSC_IMR_ENDTX_SIZE			 1
+#define SSC_IMR_ENDTX_OFFSET			 2
+#define SSC_IMR_OVRUN_SIZE			 1
+#define SSC_IMR_OVRUN_OFFSET			 5
+#define SSC_IMR_RXBUFF_SIZE			 1
+#define SSC_IMR_RXBUFF_OFFSET			 7
+#define SSC_IMR_RXRDY_SIZE			 1
+#define SSC_IMR_RXRDY_OFFSET			 4
+#define SSC_IMR_RXSYN_SIZE			 1
+#define SSC_IMR_RXSYN_OFFSET			11
+#define SSC_IMR_TXBUFE_SIZE			 1
+#define SSC_IMR_TXBUFE_OFFSET			 3
+#define SSC_IMR_TXEMPTY_SIZE			 1
+#define SSC_IMR_TXEMPTY_OFFSET			 1
+#define SSC_IMR_TXRDY_SIZE			 1
+#define SSC_IMR_TXRDY_OFFSET			 0
+#define SSC_IMR_TXSYN_SIZE			 1
+#define SSC_IMR_TXSYN_OFFSET			10
+
+/* SSC PDC Receive Pointer Register */
+#define SSC_PDC_RPR			0x00000100
+
+/* SSC PDC Receive Counter Register */
+#define SSC_PDC_RCR			0x00000104
+
+/* SSC PDC Transmit Pointer Register */
+#define SSC_PDC_TPR			0x00000108
+
+/* SSC PDC Receive Next Pointer Register */
+#define SSC_PDC_RNPR			0x00000110
+
+/* SSC PDC Receive Next Counter Register */
+#define SSC_PDC_RNCR			0x00000114
+
+/* SSC PDC Transmit Counter Register */
+#define SSC_PDC_TCR			0x0000010c
+
+/* SSC PDC Transmit Next Pointer Register */
+#define SSC_PDC_TNPR			0x00000118
+
+/* SSC PDC Transmit Next Counter Register */
+#define SSC_PDC_TNCR			0x0000011c
+
+/* SSC PDC Transfer Control Register */
+#define SSC_PDC_PTCR			0x00000120
+#define SSC_PDC_PTCR_RXTDIS_SIZE		 1
+#define SSC_PDC_PTCR_RXTDIS_OFFSET		 1
+#define SSC_PDC_PTCR_RXTEN_SIZE			 1
+#define SSC_PDC_PTCR_RXTEN_OFFSET		 0
+#define SSC_PDC_PTCR_TXTDIS_SIZE		 1
+#define SSC_PDC_PTCR_TXTDIS_OFFSET		 9
+#define SSC_PDC_PTCR_TXTEN_SIZE			 1
+#define SSC_PDC_PTCR_TXTEN_OFFSET		 8
+
+/* SSC PDC Transfer Status Register */
+#define SSC_PDC_PTSR			0x00000124
+#define SSC_PDC_PTSR_RXTEN_SIZE			 1
+#define SSC_PDC_PTSR_RXTEN_OFFSET		 0
+#define SSC_PDC_PTSR_TXTEN_SIZE			 1
+#define SSC_PDC_PTSR_TXTEN_OFFSET		 8
+
+/* Bit manipulation macros */
+#define SSC_BIT(name)					\
+	(1 << SSC_##name##_OFFSET)
+#define SSC_BF(name, value)				\
+	(((value) & ((1 << SSC_##name##_SIZE) - 1))	\
+	 << SSC_##name##_OFFSET)
+#define SSC_BFEXT(name, value)				\
+	(((value) >> SSC_##name##_OFFSET)		\
+	 & ((1 << SSC_##name##_SIZE) - 1))
+#define SSC_BFINS(name, value, old)			\
+	(((old) & ~(((1 << SSC_##name##_SIZE) - 1)	\
+	<< SSC_##name##_OFFSET)) | SSC_BF(name, value))
+
+/* Register access macros */
+#define ssc_readl(base, reg)		__raw_readl(base + SSC_##reg)
+#define ssc_writel(base, reg, value)	__raw_writel((value), base + SSC_##reg)
+
+#endif /* __INCLUDE_ATMEL_SSC_H */
diff --git a/include/linux/atmel_pdc.h b/include/linux/atmel_pdc.h
new file mode 100644
index 00000000..63499ce8
--- /dev/null
+++ b/include/linux/atmel_pdc.h
@@ -0,0 +1,38 @@
+/*
+ * include/linux/atmel_pdc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Peripheral Data Controller (PDC) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef ATMEL_PDC_H
+#define ATMEL_PDC_H
+
+#define ATMEL_PDC_RPR		0x100	/* Receive Pointer Register */
+#define ATMEL_PDC_RCR		0x104	/* Receive Counter Register */
+#define ATMEL_PDC_TPR		0x108	/* Transmit Pointer Register */
+#define ATMEL_PDC_TCR		0x10c	/* Transmit Counter Register */
+#define ATMEL_PDC_RNPR		0x110	/* Receive Next Pointer Register */
+#define ATMEL_PDC_RNCR		0x114	/* Receive Next Counter Register */
+#define ATMEL_PDC_TNPR		0x118	/* Transmit Next Pointer Register */
+#define ATMEL_PDC_TNCR		0x11c	/* Transmit Next Counter Register */
+
+#define ATMEL_PDC_PTCR		0x120	/* Transfer Control Register */
+#define		ATMEL_PDC_RXTEN		(1 << 0)	/* Receiver Transfer Enable */
+#define		ATMEL_PDC_RXTDIS	(1 << 1)	/* Receiver Transfer Disable */
+#define		ATMEL_PDC_TXTEN		(1 << 8)	/* Transmitter Transfer Enable */
+#define		ATMEL_PDC_TXTDIS	(1 << 9)	/* Transmitter Transfer Disable */
+
+#define ATMEL_PDC_PTSR		0x124	/* Transfer Status Register */
+
+#define ATMEL_PDC_SCND_BUF_OFF	0x10	/* Offset between first and second buffer registers */
+
+#endif
diff --git a/include/linux/atmel_pwm.h b/include/linux/atmel_pwm.h
new file mode 100644
index 00000000..ea04abb3
--- /dev/null
+++ b/include/linux/atmel_pwm.h
@@ -0,0 +1,70 @@
+#ifndef __LINUX_ATMEL_PWM_H
+#define __LINUX_ATMEL_PWM_H
+
+/**
+ * struct pwm_channel - driver handle to a PWM channel
+ * @regs: base of this channel's registers
+ * @index: number of this channel (0..31)
+ * @mck: base clock rate, which can be prescaled and maybe subdivided
+ *
+ * Drivers initialize a pwm_channel structure using pwm_channel_alloc().
+ * Then they configure its clock rate (derived from MCK), alignment,
+ * polarity, and duty cycle by writing directly to the channel registers,
+ * before enabling the channel by calling pwm_channel_enable().
+ *
+ * After emitting a PWM signal for the desired length of time, drivers
+ * may then pwm_channel_disable() or pwm_channel_free().  Both of these
+ * disable the channel, but when it's freed the IRQ is deconfigured and
+ * the channel must later be re-allocated and reconfigured.
+ *
+ * Note that if the period or duty cycle need to be changed while the
+ * PWM channel is operating, drivers must use the PWM_CUPD double buffer
+ * mechanism, either polling until they change or getting implicitly
+ * notified through a once-per-period interrupt handler.
+ */
+struct pwm_channel {
+	void __iomem	*regs;
+	unsigned	index;
+	unsigned long	mck;
+};
+
+extern int pwm_channel_alloc(int index, struct pwm_channel *ch);
+extern int pwm_channel_free(struct pwm_channel *ch);
+
+extern int pwm_clk_alloc(unsigned prescale, unsigned div);
+extern void pwm_clk_free(unsigned clk);
+
+extern int __pwm_channel_onoff(struct pwm_channel *ch, int enabled);
+
+#define pwm_channel_enable(ch)	__pwm_channel_onoff((ch), 1)
+#define pwm_channel_disable(ch)	__pwm_channel_onoff((ch), 0)
+
+/* periodic interrupts, mostly for CUPD changes to period or cycle */
+extern int pwm_channel_handler(struct pwm_channel *ch,
+		void (*handler)(struct pwm_channel *ch));
+
+/* per-channel registers (banked at pwm_channel->regs) */
+#define PWM_CMR		0x00		/* mode register */
+#define		PWM_CPR_CPD	(1 << 10)	/* set: CUPD modifies period */
+#define		PWM_CPR_CPOL	(1 << 9)	/* set: idle high */
+#define		PWM_CPR_CALG	(1 << 8)	/* set: center align */
+#define		PWM_CPR_CPRE	(0xf << 0)	/* mask: rate is mck/(2^pre) */
+#define		PWM_CPR_CLKA	(0xb << 0)	/* rate CLKA */
+#define		PWM_CPR_CLKB	(0xc << 0)	/* rate CLKB */
+#define PWM_CDTY	0x04		/* duty cycle (max of CPRD) */
+#define PWM_CPRD	0x08		/* period (count up from zero) */
+#define PWM_CCNT	0x0c		/* counter (20 bits?) */
+#define PWM_CUPD	0x10		/* update CPRD (or CDTY) next period */
+
+static inline void
+pwm_channel_writel(struct pwm_channel *pwmc, unsigned offset, u32 val)
+{
+	__raw_writel(val, pwmc->regs + offset);
+}
+
+static inline u32 pwm_channel_readl(struct pwm_channel *pwmc, unsigned offset)
+{
+	return __raw_readl(pwmc->regs + offset);
+}
+
+#endif /* __LINUX_ATMEL_PWM_H */
diff --git a/include/linux/atmel_serial.h b/include/linux/atmel_serial.h
new file mode 100644
index 00000000..fd683376
--- /dev/null
+++ b/include/linux/atmel_serial.h
@@ -0,0 +1,127 @@
+/*
+ * include/linux/atmel_serial.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * USART registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef ATMEL_SERIAL_H
+#define ATMEL_SERIAL_H
+
+#define ATMEL_US_CR		0x00			/* Control Register */
+#define		ATMEL_US_RSTRX		(1 <<  2)		/* Reset Receiver */
+#define		ATMEL_US_RSTTX		(1 <<  3)		/* Reset Transmitter */
+#define		ATMEL_US_RXEN		(1 <<  4)		/* Receiver Enable */
+#define		ATMEL_US_RXDIS		(1 <<  5)		/* Receiver Disable */
+#define		ATMEL_US_TXEN		(1 <<  6)		/* Transmitter Enable */
+#define		ATMEL_US_TXDIS		(1 <<  7)		/* Transmitter Disable */
+#define		ATMEL_US_RSTSTA		(1 <<  8)		/* Reset Status Bits */
+#define		ATMEL_US_STTBRK		(1 <<  9)		/* Start Break */
+#define		ATMEL_US_STPBRK		(1 << 10)		/* Stop Break */
+#define		ATMEL_US_STTTO		(1 << 11)		/* Start Time-out */
+#define		ATMEL_US_SENDA		(1 << 12)		/* Send Address */
+#define		ATMEL_US_RSTIT		(1 << 13)		/* Reset Iterations */
+#define		ATMEL_US_RSTNACK	(1 << 14)		/* Reset Non Acknowledge */
+#define		ATMEL_US_RETTO		(1 << 15)		/* Rearm Time-out */
+#define		ATMEL_US_DTREN		(1 << 16)		/* Data Terminal Ready Enable [AT91RM9200 only] */
+#define		ATMEL_US_DTRDIS		(1 << 17)		/* Data Terminal Ready Disable [AT91RM9200 only] */
+#define		ATMEL_US_RTSEN		(1 << 18)		/* Request To Send Enable */
+#define		ATMEL_US_RTSDIS		(1 << 19)		/* Request To Send Disable */
+
+#define ATMEL_US_MR		0x04			/* Mode Register */
+#define		ATMEL_US_USMODE		(0xf <<  0)		/* Mode of the USART */
+#define			ATMEL_US_USMODE_NORMAL		0
+#define			ATMEL_US_USMODE_RS485		1
+#define			ATMEL_US_USMODE_HWHS		2
+#define			ATMEL_US_USMODE_MODEM		3
+#define			ATMEL_US_USMODE_ISO7816_T0	4
+#define			ATMEL_US_USMODE_ISO7816_T1	6
+#define			ATMEL_US_USMODE_IRDA		8
+#define		ATMEL_US_USCLKS		(3   <<  4)		/* Clock Selection */
+#define			ATMEL_US_USCLKS_MCK		(0 <<  4)
+#define			ATMEL_US_USCLKS_MCK_DIV8	(1 <<  4)
+#define			ATMEL_US_USCLKS_SCK		(3 <<  4)
+#define		ATMEL_US_CHRL		(3   <<  6)		/* Character Length */
+#define			ATMEL_US_CHRL_5			(0 <<  6)
+#define			ATMEL_US_CHRL_6			(1 <<  6)
+#define			ATMEL_US_CHRL_7			(2 <<  6)
+#define			ATMEL_US_CHRL_8			(3 <<  6)
+#define		ATMEL_US_SYNC		(1 <<  8)		/* Synchronous Mode Select */
+#define		ATMEL_US_PAR		(7 <<  9)		/* Parity Type */
+#define			ATMEL_US_PAR_EVEN		(0 <<  9)
+#define			ATMEL_US_PAR_ODD		(1 <<  9)
+#define			ATMEL_US_PAR_SPACE		(2 <<  9)
+#define			ATMEL_US_PAR_MARK		(3 <<  9)
+#define			ATMEL_US_PAR_NONE		(4 <<  9)
+#define			ATMEL_US_PAR_MULTI_DROP		(6 <<  9)
+#define		ATMEL_US_NBSTOP		(3 << 12)		/* Number of Stop Bits */
+#define			ATMEL_US_NBSTOP_1		(0 << 12)
+#define			ATMEL_US_NBSTOP_1_5		(1 << 12)
+#define			ATMEL_US_NBSTOP_2		(2 << 12)
+#define		ATMEL_US_CHMODE		(3 << 14)		/* Channel Mode */
+#define			ATMEL_US_CHMODE_NORMAL		(0 << 14)
+#define			ATMEL_US_CHMODE_ECHO		(1 << 14)
+#define			ATMEL_US_CHMODE_LOC_LOOP	(2 << 14)
+#define			ATMEL_US_CHMODE_REM_LOOP	(3 << 14)
+#define		ATMEL_US_MSBF		(1 << 16)		/* Bit Order */
+#define		ATMEL_US_MODE9		(1 << 17)		/* 9-bit Character Length */
+#define		ATMEL_US_CLKO		(1 << 18)		/* Clock Output Select */
+#define		ATMEL_US_OVER		(1 << 19)		/* Oversampling Mode */
+#define		ATMEL_US_INACK		(1 << 20)		/* Inhibit Non Acknowledge */
+#define		ATMEL_US_DSNACK		(1 << 21)		/* Disable Successive NACK */
+#define		ATMEL_US_MAX_ITER	(7 << 24)		/* Max Iterations */
+#define		ATMEL_US_FILTER		(1 << 28)		/* Infrared Receive Line Filter */
+
+#define ATMEL_US_IER		0x08			/* Interrupt Enable Register */
+#define		ATMEL_US_RXRDY		(1 <<  0)		/* Receiver Ready */
+#define		ATMEL_US_TXRDY		(1 <<  1)		/* Transmitter Ready */
+#define		ATMEL_US_RXBRK		(1 <<  2)		/* Break Received / End of Break */
+#define		ATMEL_US_ENDRX		(1 <<  3)		/* End of Receiver Transfer */
+#define		ATMEL_US_ENDTX		(1 <<  4)		/* End of Transmitter Transfer */
+#define		ATMEL_US_OVRE		(1 <<  5)		/* Overrun Error */
+#define		ATMEL_US_FRAME		(1 <<  6)		/* Framing Error */
+#define		ATMEL_US_PARE		(1 <<  7)		/* Parity Error */
+#define		ATMEL_US_TIMEOUT	(1 <<  8)		/* Receiver Time-out */
+#define		ATMEL_US_TXEMPTY	(1 <<  9)		/* Transmitter Empty */
+#define		ATMEL_US_ITERATION	(1 << 10)		/* Max number of Repetitions Reached */
+#define		ATMEL_US_TXBUFE		(1 << 11)		/* Transmission Buffer Empty */
+#define		ATMEL_US_RXBUFF		(1 << 12)		/* Reception Buffer Full */
+#define		ATMEL_US_NACK		(1 << 13)		/* Non Acknowledge */
+#define		ATMEL_US_RIIC		(1 << 16)		/* Ring Indicator Input Change [AT91RM9200 only] */
+#define		ATMEL_US_DSRIC		(1 << 17)		/* Data Set Ready Input Change [AT91RM9200 only] */
+#define		ATMEL_US_DCDIC		(1 << 18)		/* Data Carrier Detect Input Change [AT91RM9200 only] */
+#define		ATMEL_US_CTSIC		(1 << 19)		/* Clear to Send Input Change */
+#define		ATMEL_US_RI		(1 << 20)		/* RI */
+#define		ATMEL_US_DSR		(1 << 21)		/* DSR */
+#define		ATMEL_US_DCD		(1 << 22)		/* DCD */
+#define		ATMEL_US_CTS		(1 << 23)		/* CTS */
+
+#define ATMEL_US_IDR		0x0c			/* Interrupt Disable Register */
+#define ATMEL_US_IMR		0x10			/* Interrupt Mask Register */
+#define ATMEL_US_CSR		0x14			/* Channel Status Register */
+#define ATMEL_US_RHR		0x18			/* Receiver Holding Register */
+#define ATMEL_US_THR		0x1c			/* Transmitter Holding Register */
+#define		ATMEL_US_SYNH		(1 << 15)		/* Transmit/Receive Sync [AT91SAM9261 only] */
+
+#define ATMEL_US_BRGR		0x20			/* Baud Rate Generator Register */
+#define		ATMEL_US_CD		(0xffff << 0)		/* Clock Divider */
+
+#define ATMEL_US_RTOR		0x24			/* Receiver Time-out Register */
+#define		ATMEL_US_TO		(0xffff << 0)		/* Time-out Value */
+
+#define ATMEL_US_TTGR		0x28			/* Transmitter Timeguard Register */
+#define		ATMEL_US_TG		(0xff << 0)		/* Timeguard Value */
+
+#define ATMEL_US_FIDI		0x40			/* FI DI Ratio Register */
+#define ATMEL_US_NER		0x44			/* Number of Errors Register */
+#define ATMEL_US_IF		0x4c			/* IrDA Filter Register */
+
+#endif
diff --git a/include/linux/atmel_tc.h b/include/linux/atmel_tc.h
new file mode 100644
index 00000000..1d14b1dc
--- /dev/null
+++ b/include/linux/atmel_tc.h
@@ -0,0 +1,262 @@
+/*
+ * Timer/Counter Unit (TC) registers.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef ATMEL_TC_H
+#define ATMEL_TC_H
+
+#include <linux/compiler.h>
+#include <linux/list.h>
+
+/*
+ * Many 32-bit Atmel SOCs include one or more TC blocks, each of which holds
+ * three general-purpose 16-bit timers.  These timers share one register bank.
+ * Depending on the SOC, each timer may have its own clock and IRQ, or those
+ * may be shared by the whole TC block.
+ *
+ * These TC blocks may have up to nine external pins:  TCLK0..2 signals for
+ * clocks or clock gates, and per-timer TIOA and TIOB signals used for PWM
+ * or triggering.  Those pins need to be set up for use with the TC block,
+ * else they will be used as GPIOs or for a different controller.
+ *
+ * Although we expect each TC block to have a platform_device node, those
+ * nodes are not what drivers bind to.  Instead, they ask for a specific
+ * TC block, by number ... which is a common approach on systems with many
+ * timers.  Then they use clk_get() and platform_get_irq() to get clock and
+ * IRQ resources.
+ */
+
+struct clk;
+
+/**
+ * struct atmel_tcb_config - SoC data for a Timer/Counter Block
+ * @counter_width: size in bits of a timer counter register
+ */
+struct atmel_tcb_config {
+	size_t	counter_width;
+};
+
+/**
+ * struct atmel_tc - information about a Timer/Counter Block
+ * @pdev: physical device
+ * @iomem: resource associated with the I/O register
+ * @regs: mapping through which the I/O registers can be accessed
+ * @tcb_config: configuration data from SoC
+ * @irq: irq for each of the three channels
+ * @clk: internal clock source for each of the three channels
+ * @node: list node, for tclib internal use
+ *
+ * On some platforms, each TC channel has its own clocks and IRQs,
+ * while on others, all TC channels share the same clock and IRQ.
+ * Drivers should clk_enable() all the clocks they need even though
+ * all the entries in @clk may point to the same physical clock.
+ * Likewise, drivers should request irqs independently for each
+ * channel, but they must use IRQF_SHARED in case some of the entries
+ * in @irq are actually the same IRQ.
+ */
+struct atmel_tc {
+	struct platform_device	*pdev;
+	struct resource		*iomem;
+	void __iomem		*regs;
+	struct atmel_tcb_config	*tcb_config;
+	int			irq[3];
+	struct clk		*clk[3];
+	struct list_head	node;
+};
+
+extern struct atmel_tc *atmel_tc_alloc(unsigned block, const char *name);
+extern void atmel_tc_free(struct atmel_tc *tc);
+
+/* platform-specific ATMEL_TC_TIMER_CLOCKx divisors (0 means 32KiHz) */
+extern const u8 atmel_tc_divisors[5];
+
+
+/*
+ * Two registers have block-wide controls.  These are: configuring the three
+ * "external" clocks (or event sources) used by the timer channels; and
+ * synchronizing the timers by resetting them all at once.
+ *
+ * "External" can mean "external to chip" using the TCLK0, TCLK1, or TCLK2
+ * signals.  Or, it can mean "external to timer", using the TIOA output from
+ * one of the other two timers that's being run in waveform mode.
+ */
+
+#define ATMEL_TC_BCR	0xc0		/* TC Block Control Register */
+#define     ATMEL_TC_SYNC	(1 << 0)	/* synchronize timers */
+
+#define ATMEL_TC_BMR	0xc4		/* TC Block Mode Register */
+#define     ATMEL_TC_TC0XC0S	(3 << 0)	/* external clock 0 source */
+#define        ATMEL_TC_TC0XC0S_TCLK0	(0 << 0)
+#define        ATMEL_TC_TC0XC0S_NONE	(1 << 0)
+#define        ATMEL_TC_TC0XC0S_TIOA1	(2 << 0)
+#define        ATMEL_TC_TC0XC0S_TIOA2	(3 << 0)
+#define     ATMEL_TC_TC1XC1S	(3 << 2)	/* external clock 1 source */
+#define        ATMEL_TC_TC1XC1S_TCLK1	(0 << 2)
+#define        ATMEL_TC_TC1XC1S_NONE	(1 << 2)
+#define        ATMEL_TC_TC1XC1S_TIOA0	(2 << 2)
+#define        ATMEL_TC_TC1XC1S_TIOA2	(3 << 2)
+#define     ATMEL_TC_TC2XC2S	(3 << 4)	/* external clock 2 source */
+#define        ATMEL_TC_TC2XC2S_TCLK2	(0 << 4)
+#define        ATMEL_TC_TC2XC2S_NONE	(1 << 4)
+#define        ATMEL_TC_TC2XC2S_TIOA0	(2 << 4)
+#define        ATMEL_TC_TC2XC2S_TIOA1	(3 << 4)
+
+
+/*
+ * Each TC block has three "channels", each with one counter and controls.
+ *
+ * Note that the semantics of ATMEL_TC_TIMER_CLOCKx (input clock selection
+ * when it's not "external") is silicon-specific.  AT91 platforms use one
+ * set of definitions; AVR32 platforms use a different set.  Don't hard-wire
+ * such knowledge into your code, use the global "atmel_tc_divisors" ...
+ * where index N is the divisor for clock N+1, else zero to indicate it uses
+ * the 32 KiHz clock.
+ *
+ * The timers can be chained in various ways, and operated in "waveform"
+ * generation mode (including PWM) or "capture" mode (to time events).  In
+ * both modes, behavior can be configured in many ways.
+ *
+ * Each timer has two I/O pins, TIOA and TIOB.  Waveform mode uses TIOA as a
+ * PWM output, and TIOB as either another PWM or as a trigger.  Capture mode
+ * uses them only as inputs.
+ */
+#define ATMEL_TC_CHAN(idx)	((idx)*0x40)
+#define ATMEL_TC_REG(idx, reg)	(ATMEL_TC_CHAN(idx) + ATMEL_TC_ ## reg)
+
+#define ATMEL_TC_CCR	0x00		/* Channel Control Register */
+#define     ATMEL_TC_CLKEN	(1 << 0)	/* clock enable */
+#define     ATMEL_TC_CLKDIS	(1 << 1)	/* clock disable */
+#define     ATMEL_TC_SWTRG	(1 << 2)	/* software trigger */
+
+#define ATMEL_TC_CMR	0x04		/* Channel Mode Register */
+
+/* Both modes share some CMR bits */
+#define     ATMEL_TC_TCCLKS	(7 << 0)	/* clock source */
+#define        ATMEL_TC_TIMER_CLOCK1	(0 << 0)
+#define        ATMEL_TC_TIMER_CLOCK2	(1 << 0)
+#define        ATMEL_TC_TIMER_CLOCK3	(2 << 0)
+#define        ATMEL_TC_TIMER_CLOCK4	(3 << 0)
+#define        ATMEL_TC_TIMER_CLOCK5	(4 << 0)
+#define        ATMEL_TC_XC0		(5 << 0)
+#define        ATMEL_TC_XC1		(6 << 0)
+#define        ATMEL_TC_XC2		(7 << 0)
+#define     ATMEL_TC_CLKI	(1 << 3)	/* clock invert */
+#define     ATMEL_TC_BURST	(3 << 4)	/* clock gating */
+#define        ATMEL_TC_GATE_NONE	(0 << 4)
+#define        ATMEL_TC_GATE_XC0	(1 << 4)
+#define        ATMEL_TC_GATE_XC1	(2 << 4)
+#define        ATMEL_TC_GATE_XC2	(3 << 4)
+#define     ATMEL_TC_WAVE	(1 << 15)	/* true = Waveform mode */
+
+/* CAPTURE mode CMR bits */
+#define     ATMEL_TC_LDBSTOP	(1 << 6)	/* counter stops on RB load */
+#define     ATMEL_TC_LDBDIS	(1 << 7)	/* counter disable on RB load */
+#define     ATMEL_TC_ETRGEDG	(3 << 8)	/* external trigger edge */
+#define        ATMEL_TC_ETRGEDG_NONE	(0 << 8)
+#define        ATMEL_TC_ETRGEDG_RISING	(1 << 8)
+#define        ATMEL_TC_ETRGEDG_FALLING	(2 << 8)
+#define        ATMEL_TC_ETRGEDG_BOTH	(3 << 8)
+#define     ATMEL_TC_ABETRG	(1 << 10)	/* external trigger is TIOA? */
+#define     ATMEL_TC_CPCTRG	(1 << 14)	/* RC compare trigger enable */
+#define     ATMEL_TC_LDRA	(3 << 16)	/* RA loading edge (of TIOA) */
+#define        ATMEL_TC_LDRA_NONE	(0 << 16)
+#define        ATMEL_TC_LDRA_RISING	(1 << 16)
+#define        ATMEL_TC_LDRA_FALLING	(2 << 16)
+#define        ATMEL_TC_LDRA_BOTH	(3 << 16)
+#define     ATMEL_TC_LDRB	(3 << 18)	/* RB loading edge (of TIOA) */
+#define        ATMEL_TC_LDRB_NONE	(0 << 18)
+#define        ATMEL_TC_LDRB_RISING	(1 << 18)
+#define        ATMEL_TC_LDRB_FALLING	(2 << 18)
+#define        ATMEL_TC_LDRB_BOTH	(3 << 18)
+
+/* WAVEFORM mode CMR bits */
+#define     ATMEL_TC_CPCSTOP	(1 <<  6)	/* RC compare stops counter */
+#define     ATMEL_TC_CPCDIS	(1 <<  7)	/* RC compare disables counter */
+#define     ATMEL_TC_EEVTEDG	(3 <<  8)	/* external event edge */
+#define        ATMEL_TC_EEVTEDG_NONE	(0 << 8)
+#define        ATMEL_TC_EEVTEDG_RISING	(1 << 8)
+#define        ATMEL_TC_EEVTEDG_FALLING	(2 << 8)
+#define        ATMEL_TC_EEVTEDG_BOTH	(3 << 8)
+#define     ATMEL_TC_EEVT	(3 << 10)	/* external event source */
+#define        ATMEL_TC_EEVT_TIOB	(0 << 10)
+#define        ATMEL_TC_EEVT_XC0	(1 << 10)
+#define        ATMEL_TC_EEVT_XC1	(2 << 10)
+#define        ATMEL_TC_EEVT_XC2	(3 << 10)
+#define     ATMEL_TC_ENETRG	(1 << 12)	/* external event is trigger */
+#define     ATMEL_TC_WAVESEL	(3 << 13)	/* waveform type */
+#define        ATMEL_TC_WAVESEL_UP	(0 << 13)
+#define        ATMEL_TC_WAVESEL_UPDOWN	(1 << 13)
+#define        ATMEL_TC_WAVESEL_UP_AUTO	(2 << 13)
+#define        ATMEL_TC_WAVESEL_UPDOWN_AUTO (3 << 13)
+#define     ATMEL_TC_ACPA	(3 << 16)	/* RA compare changes TIOA */
+#define        ATMEL_TC_ACPA_NONE	(0 << 16)
+#define        ATMEL_TC_ACPA_SET	(1 << 16)
+#define        ATMEL_TC_ACPA_CLEAR	(2 << 16)
+#define        ATMEL_TC_ACPA_TOGGLE	(3 << 16)
+#define     ATMEL_TC_ACPC	(3 << 18)	/* RC compare changes TIOA */
+#define        ATMEL_TC_ACPC_NONE	(0 << 18)
+#define        ATMEL_TC_ACPC_SET	(1 << 18)
+#define        ATMEL_TC_ACPC_CLEAR	(2 << 18)
+#define        ATMEL_TC_ACPC_TOGGLE	(3 << 18)
+#define     ATMEL_TC_AEEVT	(3 << 20)	/* external event changes TIOA */
+#define        ATMEL_TC_AEEVT_NONE	(0 << 20)
+#define        ATMEL_TC_AEEVT_SET	(1 << 20)
+#define        ATMEL_TC_AEEVT_CLEAR	(2 << 20)
+#define        ATMEL_TC_AEEVT_TOGGLE	(3 << 20)
+#define     ATMEL_TC_ASWTRG	(3 << 22)	/* software trigger changes TIOA */
+#define        ATMEL_TC_ASWTRG_NONE	(0 << 22)
+#define        ATMEL_TC_ASWTRG_SET	(1 << 22)
+#define        ATMEL_TC_ASWTRG_CLEAR	(2 << 22)
+#define        ATMEL_TC_ASWTRG_TOGGLE	(3 << 22)
+#define     ATMEL_TC_BCPB	(3 << 24)	/* RB compare changes TIOB */
+#define        ATMEL_TC_BCPB_NONE	(0 << 24)
+#define        ATMEL_TC_BCPB_SET	(1 << 24)
+#define        ATMEL_TC_BCPB_CLEAR	(2 << 24)
+#define        ATMEL_TC_BCPB_TOGGLE	(3 << 24)
+#define     ATMEL_TC_BCPC	(3 << 26)	/* RC compare changes TIOB */
+#define        ATMEL_TC_BCPC_NONE	(0 << 26)
+#define        ATMEL_TC_BCPC_SET	(1 << 26)
+#define        ATMEL_TC_BCPC_CLEAR	(2 << 26)
+#define        ATMEL_TC_BCPC_TOGGLE	(3 << 26)
+#define     ATMEL_TC_BEEVT	(3 << 28)	/* external event changes TIOB */
+#define        ATMEL_TC_BEEVT_NONE	(0 << 28)
+#define        ATMEL_TC_BEEVT_SET	(1 << 28)
+#define        ATMEL_TC_BEEVT_CLEAR	(2 << 28)
+#define        ATMEL_TC_BEEVT_TOGGLE	(3 << 28)
+#define     ATMEL_TC_BSWTRG	(3 << 30)	/* software trigger changes TIOB */
+#define        ATMEL_TC_BSWTRG_NONE	(0 << 30)
+#define        ATMEL_TC_BSWTRG_SET	(1 << 30)
+#define        ATMEL_TC_BSWTRG_CLEAR	(2 << 30)
+#define        ATMEL_TC_BSWTRG_TOGGLE	(3 << 30)
+
+#define ATMEL_TC_CV	0x10		/* counter Value */
+#define ATMEL_TC_RA	0x14		/* register A */
+#define ATMEL_TC_RB	0x18		/* register B */
+#define ATMEL_TC_RC	0x1c		/* register C */
+
+#define ATMEL_TC_SR	0x20		/* status (read-only) */
+/* Status-only flags */
+#define     ATMEL_TC_CLKSTA	(1 << 16)	/* clock enabled */
+#define     ATMEL_TC_MTIOA	(1 << 17)	/* TIOA mirror */
+#define     ATMEL_TC_MTIOB	(1 << 18)	/* TIOB mirror */
+
+#define ATMEL_TC_IER	0x24		/* interrupt enable (write-only) */
+#define ATMEL_TC_IDR	0x28		/* interrupt disable (write-only) */
+#define ATMEL_TC_IMR	0x2c		/* interrupt mask (read-only) */
+
+/* Status and IRQ flags */
+#define     ATMEL_TC_COVFS	(1 <<  0)	/* counter overflow */
+#define     ATMEL_TC_LOVRS	(1 <<  1)	/* load overrun */
+#define     ATMEL_TC_CPAS	(1 <<  2)	/* RA compare */
+#define     ATMEL_TC_CPBS	(1 <<  3)	/* RB compare */
+#define     ATMEL_TC_CPCS	(1 <<  4)	/* RC compare */
+#define     ATMEL_TC_LDRAS	(1 <<  5)	/* RA loading */
+#define     ATMEL_TC_LDRBS	(1 <<  6)	/* RB loading */
+#define     ATMEL_TC_ETRGS	(1 <<  7)	/* external trigger */
+
+#endif
diff --git a/include/linux/atmioc.h b/include/linux/atmioc.h
new file mode 100644
index 00000000..37f67aa8
--- /dev/null
+++ b/include/linux/atmioc.h
@@ -0,0 +1,41 @@
+/* atmioc.h - ranges for ATM-related ioctl numbers */
+ 
+/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */
+
+
+/*
+ * See http://icawww1.epfl.ch/linux-atm/magic.html for the complete list of
+ * "magic" ioctl numbers.
+ */
+
+
+#ifndef _LINUX_ATMIOC_H
+#define _LINUX_ATMIOC_H
+
+#include <asm/ioctl.h>
+		/* everybody including atmioc.h will also need _IO{,R,W,WR} */
+
+#define ATMIOC_PHYCOM	  0x00 /* PHY device common ioctls, globally unique */
+#define ATMIOC_PHYCOM_END 0x0f
+#define ATMIOC_PHYTYP	  0x10 /* PHY dev type ioctls, unique per PHY type */
+#define ATMIOC_PHYTYP_END 0x2f
+#define ATMIOC_PHYPRV	  0x30 /* PHY dev private ioctls, unique per driver */
+#define ATMIOC_PHYPRV_END 0x4f
+#define ATMIOC_SARCOM	  0x50 /* SAR device common ioctls, globally unique */
+#define ATMIOC_SARCOM_END 0x50
+#define ATMIOC_SARPRV	  0x60 /* SAR dev private ioctls, unique per driver */
+#define ATMIOC_SARPRV_END 0x7f
+#define ATMIOC_ITF	  0x80 /* Interface ioctls, globally unique */
+#define ATMIOC_ITF_END	  0x8f
+#define ATMIOC_BACKEND	  0x90 /* ATM generic backend ioctls, u. per backend */
+#define ATMIOC_BACKEND_END 0xaf
+/* 0xb0-0xbf: Reserved for future use */
+#define ATMIOC_AREQUIPA	  0xc0 /* Application requested IP over ATM, glob. u. */
+#define ATMIOC_LANE	  0xd0 /* LAN Emulation, globally unique */
+#define ATMIOC_MPOA       0xd8 /* MPOA, globally unique */
+#define	ATMIOC_CLIP	  0xe0 /* Classical IP over ATM control, globally u. */
+#define	ATMIOC_CLIP_END	  0xef
+#define	ATMIOC_SPECIAL	  0xf0 /* Special-purpose controls, globally unique */
+#define	ATMIOC_SPECIAL_END 0xff
+
+#endif
diff --git a/include/linux/atmlec.h b/include/linux/atmlec.h
new file mode 100644
index 00000000..39c917fd
--- /dev/null
+++ b/include/linux/atmlec.h
@@ -0,0 +1,98 @@
+/*
+ * ATM Lan Emulation Daemon driver interface
+ *
+ * Marko Kiiskila <mkiiskila@yahoo.com>
+ */
+
+#ifndef _ATMLEC_H_
+#define _ATMLEC_H_
+
+#include <linux/atmapi.h>
+#include <linux/atmioc.h>
+#include <linux/atm.h>
+#include <linux/if_ether.h>
+#include <linux/types.h>
+
+/* ATM lec daemon control socket */
+#define ATMLEC_CTRL	_IO('a', ATMIOC_LANE)
+#define ATMLEC_DATA	_IO('a', ATMIOC_LANE+1)
+#define ATMLEC_MCAST	_IO('a', ATMIOC_LANE+2)
+
+/* Maximum number of LEC interfaces (tweakable) */
+#define MAX_LEC_ITF 48
+
+/*
+ * From the total of MAX_LEC_ITF, last NUM_TR_DEVS are reserved for Token Ring.
+ * E.g. if MAX_LEC_ITF = 48 and NUM_TR_DEVS = 8, then lec0-lec39 are for
+ * Ethernet ELANs and lec40-lec47 are for Token Ring ELANS.
+ */
+#define NUM_TR_DEVS 8
+
+typedef enum {
+	l_set_mac_addr,
+	l_del_mac_addr,
+	l_svc_setup,
+	l_addr_delete,
+	l_topology_change,
+	l_flush_complete,
+	l_arp_update,
+	l_narp_req,		/* LANE2 mandates the use of this */
+	l_config,
+	l_flush_tran_id,
+	l_set_lecid,
+	l_arp_xmt,
+	l_rdesc_arp_xmt,
+	l_associate_req,
+	l_should_bridge		/* should we bridge this MAC? */
+} atmlec_msg_type;
+
+#define ATMLEC_MSG_TYPE_MAX l_should_bridge
+
+struct atmlec_config_msg {
+	unsigned int maximum_unknown_frame_count;
+	unsigned int max_unknown_frame_time;
+	unsigned short max_retry_count;
+	unsigned int aging_time;
+	unsigned int forward_delay_time;
+	unsigned int arp_response_time;
+	unsigned int flush_timeout;
+	unsigned int path_switching_delay;
+	unsigned int lane_version;	/* LANE2: 1 for LANEv1, 2 for LANEv2 */
+	int mtu;
+	int is_proxy;
+};
+
+struct atmlec_msg {
+	atmlec_msg_type type;
+	int sizeoftlvs;		/* LANE2: if != 0, tlvs follow */
+	union {
+		struct {
+			unsigned char mac_addr[ETH_ALEN];
+			unsigned char atm_addr[ATM_ESA_LEN];
+			unsigned int flag;	/*
+						 * Topology_change flag,
+						 * remoteflag, permanent flag,
+						 * lecid, transaction id
+						 */
+			unsigned int targetless_le_arp;	/* LANE2 */
+			unsigned int no_source_le_narp;	/* LANE2 */
+		} normal;
+		struct atmlec_config_msg config;
+		struct {
+			__u16 lec_id;				/* requestor lec_id  */
+			__u32 tran_id;				/* transaction id    */
+			unsigned char mac_addr[ETH_ALEN];	/* dst mac addr      */
+			unsigned char atm_addr[ATM_ESA_LEN];	/* reqestor ATM addr */
+		} proxy;	/*
+				 * For mapping LE_ARP requests to responses. Filled by
+				 * zeppelin, returned by kernel. Used only when proxying
+				 */
+	} content;
+} __ATM_API_ALIGN;
+
+struct atmlec_ioc {
+	int dev_num;
+	unsigned char atm_addr[ATM_ESA_LEN];
+	unsigned char receive;	/* 1= receive vcc, 0 = send vcc */
+};
+#endif /* _ATMLEC_H_ */
diff --git a/include/linux/atmmpc.h b/include/linux/atmmpc.h
new file mode 100644
index 00000000..2aba5787
--- /dev/null
+++ b/include/linux/atmmpc.h
@@ -0,0 +1,126 @@
+#ifndef _ATMMPC_H_
+#define _ATMMPC_H_
+
+#include <linux/atmapi.h>
+#include <linux/atmioc.h>
+#include <linux/atm.h>
+#include <linux/types.h>
+
+#define ATMMPC_CTRL _IO('a', ATMIOC_MPOA)
+#define ATMMPC_DATA _IO('a', ATMIOC_MPOA+1)
+
+#define MPC_SOCKET_INGRESS 1
+#define MPC_SOCKET_EGRESS  2
+
+struct atmmpc_ioc {
+        int dev_num;
+        __be32 ipaddr;              /* the IP address of the shortcut    */
+        int type;                     /* ingress or egress                 */
+};
+
+typedef struct in_ctrl_info {
+        __u8   Last_NHRP_CIE_code;
+        __u8   Last_Q2931_cause_value;
+        __u8   eg_MPC_ATM_addr[ATM_ESA_LEN];
+        __be32  tag;
+        __be32  in_dst_ip;      /* IP address this ingress MPC sends packets to */
+        __u16  holding_time;
+        __u32  request_id;
+} in_ctrl_info;
+
+typedef struct eg_ctrl_info {
+        __u8   DLL_header[256];
+        __u8   DH_length;
+        __be32  cache_id;
+        __be32  tag;
+        __be32  mps_ip;
+        __be32  eg_dst_ip;      /* IP address to which ingress MPC sends packets */
+        __u8   in_MPC_data_ATM_addr[ATM_ESA_LEN];
+        __u16  holding_time;
+} eg_ctrl_info;
+
+struct mpc_parameters {
+        __u16 mpc_p1;   /* Shortcut-Setup Frame Count    */
+        __u16 mpc_p2;   /* Shortcut-Setup Frame Time     */
+        __u8 mpc_p3[8]; /* Flow-detection Protocols      */
+        __u16 mpc_p4;   /* MPC Initial Retry Time        */
+        __u16 mpc_p5;   /* MPC Retry Time Maximum        */
+        __u16 mpc_p6;   /* Hold Down Time                */
+} ;
+
+struct k_message {
+        __u16 type;
+        __be32 ip_mask;
+        __u8  MPS_ctrl[ATM_ESA_LEN];
+        union {
+                in_ctrl_info in_info;
+                eg_ctrl_info eg_info;
+                struct mpc_parameters params;
+        } content;
+        struct atm_qos qos;       
+} __ATM_API_ALIGN;
+
+struct llc_snap_hdr {
+	/* RFC 1483 LLC/SNAP encapsulation for routed IP PDUs */
+        __u8  dsap;    /* Destination Service Access Point (0xAA)     */
+        __u8  ssap;    /* Source Service Access Point      (0xAA)     */
+        __u8  ui;      /* Unnumbered Information           (0x03)     */
+        __u8  org[3];  /* Organizational identification    (0x000000) */
+        __u8  type[2]; /* Ether type (for IP)              (0x0800)   */
+};
+
+/* TLVs this MPC recognizes */
+#define TLV_MPOA_DEVICE_TYPE         0x00a03e2a  
+
+/* MPOA device types in MPOA Device Type TLV */
+#define NON_MPOA    0
+#define MPS         1
+#define MPC         2
+#define MPS_AND_MPC 3
+
+
+/* MPC parameter defaults */
+
+#define MPC_P1 10  /* Shortcut-Setup Frame Count  */ 
+#define MPC_P2 1   /* Shortcut-Setup Frame Time   */
+#define MPC_P3 0   /* Flow-detection Protocols    */
+#define MPC_P4 5   /* MPC Initial Retry Time      */
+#define MPC_P5 40  /* MPC Retry Time Maximum      */
+#define MPC_P6 160 /* Hold Down Time              */
+#define HOLDING_TIME_DEFAULT 1200 /* same as MPS-p7 */
+
+/* MPC constants */
+
+#define MPC_C1 2   /* Retry Time Multiplier       */
+#define MPC_C2 60  /* Initial Keep-Alive Lifetime */
+
+/* Message types - to MPOA daemon */
+
+#define SND_MPOA_RES_RQST    201
+#define SET_MPS_CTRL_ADDR    202
+#define SND_MPOA_RES_RTRY    203 /* Different type in a retry due to req id         */
+#define STOP_KEEP_ALIVE_SM   204
+#define EGRESS_ENTRY_REMOVED 205
+#define SND_EGRESS_PURGE     206
+#define DIE                  207 /* tell the daemon to exit()                       */
+#define DATA_PLANE_PURGE     208 /* Data plane purge because of egress cache hit miss or dead MPS */
+#define OPEN_INGRESS_SVC     209
+
+/* Message types - from MPOA daemon */
+
+#define MPOA_TRIGGER_RCVD     101
+#define MPOA_RES_REPLY_RCVD   102
+#define INGRESS_PURGE_RCVD    103
+#define EGRESS_PURGE_RCVD     104
+#define MPS_DEATH             105
+#define CACHE_IMPOS_RCVD      106
+#define SET_MPC_CTRL_ADDR     107 /* Our MPC's control ATM address   */
+#define SET_MPS_MAC_ADDR      108
+#define CLEAN_UP_AND_EXIT     109
+#define SET_MPC_PARAMS        110 /* MPC configuration parameters    */
+
+/* Message types - bidirectional */       
+
+#define RELOAD                301 /* kill -HUP the daemon for reload */
+
+#endif /* _ATMMPC_H_ */
diff --git a/include/linux/atmppp.h b/include/linux/atmppp.h
new file mode 100644
index 00000000..300dcce0
--- /dev/null
+++ b/include/linux/atmppp.h
@@ -0,0 +1,24 @@
+/* atmppp.h - RFC2364 PPPoATM */
+
+/* Written 2000 by Mitchell Blank Jr */
+
+#ifndef _LINUX_ATMPPP_H
+#define _LINUX_ATMPPP_H
+
+#include <linux/atm.h>
+
+#define PPPOATM_ENCAPS_AUTODETECT	(0)
+#define PPPOATM_ENCAPS_VC		(1)
+#define PPPOATM_ENCAPS_LLC		(2)
+
+/*
+ * This is for the ATM_SETBACKEND call - these are like socket families:
+ * the first element of the structure is the backend number and the rest
+ * is per-backend specific
+ */
+struct atm_backend_ppp {
+	atm_backend_t	backend_num;	/* ATM_BACKEND_PPP */
+	int		encaps;		/* PPPOATM_ENCAPS_* */
+};
+
+#endif	/* _LINUX_ATMPPP_H */
diff --git a/include/linux/atmsap.h b/include/linux/atmsap.h
new file mode 100644
index 00000000..799b1045
--- /dev/null
+++ b/include/linux/atmsap.h
@@ -0,0 +1,162 @@
+/* atmsap.h - ATM Service Access Point addressing definitions */
+
+/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */
+
+
+#ifndef _LINUX_ATMSAP_H
+#define _LINUX_ATMSAP_H
+
+#include <linux/atmapi.h>
+
+/*
+ * BEGIN_xx and END_xx markers are used for automatic generation of
+ * documentation. Do not change them.
+ */
+
+
+/*
+ * Layer 2 protocol identifiers
+ */
+
+/* BEGIN_L2 */
+#define ATM_L2_NONE	0	/* L2 not specified */
+#define ATM_L2_ISO1745  0x01	/* Basic mode ISO 1745 */
+#define ATM_L2_Q291	0x02	/* ITU-T Q.291 (Rec. I.441) */
+#define ATM_L2_X25_LL	0x06	/* ITU-T X.25, link layer */
+#define ATM_L2_X25_ML	0x07	/* ITU-T X.25, multilink */
+#define ATM_L2_LAPB	0x08	/* Extended LAPB, half-duplex (Rec. T.71) */
+#define ATM_L2_HDLC_ARM	0x09	/* HDLC ARM (ISO/IEC 4335) */
+#define ATM_L2_HDLC_NRM	0x0a	/* HDLC NRM (ISO/IEC 4335) */
+#define ATM_L2_HDLC_ABM	0x0b	/* HDLC ABM (ISO/IEC 4335) */
+#define ATM_L2_ISO8802	0x0c	/* LAN LLC (ISO/IEC 8802/2) */
+#define ATM_L2_X75	0x0d	/* ITU-T X.75, SLP */
+#define ATM_L2_Q922	0x0e	/* ITU-T Q.922 */
+#define ATM_L2_USER	0x10	/* user-specified */
+#define ATM_L2_ISO7776	0x11	/* ISO 7776 DTE-DTE */
+/* END_L2 */
+
+
+/*
+ * Layer 3 protocol identifiers
+ */
+
+/* BEGIN_L3 */
+#define ATM_L3_NONE	0	/* L3 not specified */
+#define ATM_L3_X25	0x06	/* ITU-T X.25, packet layer */
+#define ATM_L3_ISO8208	0x07	/* ISO/IEC 8208 */
+#define ATM_L3_X223	0x08	/* ITU-T X.223 | ISO/IEC 8878 */
+#define ATM_L3_ISO8473	0x09	/* ITU-T X.233 | ISO/IEC 8473 */
+#define ATM_L3_T70	0x0a	/* ITU-T T.70 minimum network layer */
+#define ATM_L3_TR9577	0x0b	/* ISO/IEC TR 9577 */
+#define ATM_L3_H310	0x0c	/* ITU-T Recommendation H.310 */
+#define ATM_L3_H321	0x0d	/* ITU-T Recommendation H.321 */
+#define ATM_L3_USER	0x10	/* user-specified */
+/* END_L3 */
+
+
+/*
+ * High layer identifiers
+ */
+
+/* BEGIN_HL */
+#define ATM_HL_NONE	0	/* HL not specified */
+#define ATM_HL_ISO	0x01	/* ISO */
+#define ATM_HL_USER	0x02	/* user-specific */
+#define ATM_HL_HLP	0x03	/* high layer profile - UNI 3.0 only */
+#define ATM_HL_VENDOR	0x04	/* vendor-specific application identifier */
+/* END_HL */
+
+
+/*
+ * ITU-T coded mode of operation
+ */
+
+/* BEGIN_IMD */
+#define ATM_IMD_NONE	 0	/* mode not specified */
+#define ATM_IMD_NORMAL	 1	/* normal mode of operation */
+#define ATM_IMD_EXTENDED 2	/* extended mode of operation */
+/* END_IMD */
+
+/*
+ * H.310 code points
+ */
+
+#define ATM_TT_NONE	0	/* terminal type not specified */
+#define ATM_TT_RX	1	/* receive only */
+#define ATM_TT_TX	2	/* send only */
+#define ATM_TT_RXTX	3	/* receive and send */
+
+#define ATM_MC_NONE	0	/* no multiplexing */
+#define ATM_MC_TS	1	/* transport stream (TS) */
+#define ATM_MC_TS_FEC	2	/* transport stream with forward error corr. */
+#define ATM_MC_PS	3	/* program stream (PS) */
+#define ATM_MC_PS_FEC	4	/* program stream with forward error corr. */
+#define ATM_MC_H221	5	/* ITU-T Rec. H.221 */
+
+/*
+ * SAP structures
+ */
+
+#define ATM_MAX_HLI	8	/* maximum high-layer information length */
+
+
+struct atm_blli {
+    unsigned char l2_proto;	/* layer 2 protocol */
+    union {
+	struct {
+	    unsigned char mode;	/* mode of operation (ATM_IMD_xxx), 0 if */
+				/* absent */
+	    unsigned char window; /* window size (k), 1-127 (0 to omit) */
+	} itu;			/* ITU-T encoding */
+	unsigned char user;	/* user-specified l2 information */
+    } l2;
+    unsigned char l3_proto;	/* layer 3 protocol */
+    union {
+	struct {
+	    unsigned char mode;	/* mode of operation (ATM_IMD_xxx), 0 if */
+				/* absent */
+	    unsigned char def_size; /* default packet size (log2), 4-12 (0 to */
+				    /* omit) */
+	    unsigned char window;/* packet window size, 1-127 (0 to omit) */
+	} itu;			/* ITU-T encoding */
+	unsigned char user;	/* user specified l3 information */
+	struct {		      /* if l3_proto = ATM_L3_H310 */
+	    unsigned char term_type;  /* terminal type */
+	    unsigned char fw_mpx_cap; /* forward multiplexing capability */
+				      /* only if term_type != ATM_TT_NONE */
+	    unsigned char bw_mpx_cap; /* backward multiplexing capability */
+				      /* only if term_type != ATM_TT_NONE */
+	} h310;
+	struct {		  /* if l3_proto = ATM_L3_TR9577 */
+	    unsigned char ipi;	  /* initial protocol id */
+	    unsigned char snap[5];/* IEEE 802.1 SNAP identifier */
+				  /* (only if ipi == NLPID_IEEE802_1_SNAP) */
+	} tr9577;
+    } l3;
+} __ATM_API_ALIGN;
+
+
+struct atm_bhli {
+    unsigned char hl_type;	/* high layer information type */
+    unsigned char hl_length;	/* length (only if hl_type == ATM_HL_USER || */
+				/* hl_type == ATM_HL_ISO) */
+    unsigned char hl_info[ATM_MAX_HLI];/* high layer information */
+};
+
+
+#define ATM_MAX_BLLI	3		/* maximum number of BLLI elements */
+
+
+struct atm_sap {
+	struct atm_bhli bhli;		/* local SAP, high-layer information */
+	struct atm_blli blli[ATM_MAX_BLLI] __ATM_API_ALIGN;
+					/* local SAP, low-layer info */
+};
+
+
+static __inline__ int blli_in_use(struct atm_blli blli)
+{
+	return blli.l2_proto || blli.l3_proto;
+}
+
+#endif
diff --git a/include/linux/atmsvc.h b/include/linux/atmsvc.h
new file mode 100644
index 00000000..aa71583b
--- /dev/null
+++ b/include/linux/atmsvc.h
@@ -0,0 +1,55 @@
+/* atmsvc.h - ATM signaling kernel-demon interface definitions */
+ 
+/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
+ 
+
+#ifndef _LINUX_ATMSVC_H
+#define _LINUX_ATMSVC_H
+
+#include <linux/atmapi.h>
+#include <linux/atm.h>
+#include <linux/atmioc.h>
+
+
+#define ATMSIGD_CTRL _IO('a',ATMIOC_SPECIAL)
+				/* become ATM signaling demon control socket */
+
+enum atmsvc_msg_type { as_catch_null, as_bind, as_connect, as_accept, as_reject,
+		       as_listen, as_okay, as_error, as_indicate, as_close,
+		       as_itf_notify, as_modify, as_identify, as_terminate,
+		       as_addparty, as_dropparty };
+
+struct atmsvc_msg {
+	enum atmsvc_msg_type type;
+	atm_kptr_t vcc;
+	atm_kptr_t listen_vcc;		/* indicate */
+	int reply;			/* for okay and close:		   */
+					/*   < 0: error before active	   */
+					/*        (sigd has discarded ctx) */
+					/*   ==0: success		   */
+				        /*   > 0: error when active (still */
+					/*        need to close)	   */
+	struct sockaddr_atmpvc pvc;	/* indicate, okay (connect) */
+	struct sockaddr_atmsvc local;	/* local SVC address */
+	struct atm_qos qos;		/* QOS parameters */
+	struct atm_sap sap;		/* SAP */
+	unsigned int session;		/* for p2pm */
+	struct sockaddr_atmsvc svc;	/* SVC address */
+} __ATM_API_ALIGN;
+
+/*
+ * Message contents: see ftp://icaftp.epfl.ch/pub/linux/atm/docs/isp-*.tar.gz
+ */
+
+/*
+ * Some policy stuff for atmsigd and for net/atm/svc.c. Both have to agree on
+ * what PCR is used to request bandwidth from the device driver. net/atm/svc.c
+ * tries to do better than that, but only if there's no routing decision (i.e.
+ * if signaling only uses one ATM interface).
+ */
+
+#define SELECT_TOP_PCR(tp) ((tp).pcr ? (tp).pcr : \
+  (tp).max_pcr && (tp).max_pcr != ATM_MAX_PCR ? (tp).max_pcr : \
+  (tp).min_pcr ? (tp).min_pcr : ATM_MAX_PCR)
+
+#endif
diff --git a/include/linux/atomic.h b/include/linux/atomic.h
new file mode 100644
index 00000000..70cfcb2d
--- /dev/null
+++ b/include/linux/atomic.h
@@ -0,0 +1,106 @@
+/* Atomic operations usable in machine independent code */
+#ifndef _LINUX_ATOMIC_H
+#define _LINUX_ATOMIC_H
+#include <asm/atomic.h>
+
+/**
+ * atomic_add_unless - add unless the number is already a given value
+ * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as @v was not already @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	return __atomic_add_unless(v, a, u) != u;
+}
+
+/**
+ * atomic_inc_not_zero - increment unless the number is zero
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1, so long as @v is non-zero.
+ * Returns non-zero if @v was non-zero, and zero otherwise.
+ */
+#ifndef atomic_inc_not_zero
+#define atomic_inc_not_zero(v)		atomic_add_unless((v), 1, 0)
+#endif
+
+/**
+ * atomic_inc_not_zero_hint - increment if not null
+ * @v: pointer of type atomic_t
+ * @hint: probable value of the atomic before the increment
+ *
+ * This version of atomic_inc_not_zero() gives a hint of probable
+ * value of the atomic. This helps processor to not read the memory
+ * before doing the atomic read/modify/write cycle, lowering
+ * number of bus transactions on some arches.
+ *
+ * Returns: 0 if increment was not done, 1 otherwise.
+ */
+#ifndef atomic_inc_not_zero_hint
+static inline int atomic_inc_not_zero_hint(atomic_t *v, int hint)
+{
+	int val, c = hint;
+
+	/* sanity test, should be removed by compiler if hint is a constant */
+	if (!hint)
+		return atomic_inc_not_zero(v);
+
+	do {
+		val = atomic_cmpxchg(v, c, c + 1);
+		if (val == c)
+			return 1;
+		c = val;
+	} while (c);
+
+	return 0;
+}
+#endif
+
+#ifndef atomic_inc_unless_negative
+static inline int atomic_inc_unless_negative(atomic_t *p)
+{
+	int v, v1;
+	for (v = 0; v >= 0; v = v1) {
+		v1 = atomic_cmpxchg(p, v, v + 1);
+		if (likely(v1 == v))
+			return 1;
+	}
+	return 0;
+}
+#endif
+
+#ifndef atomic_dec_unless_positive
+static inline int atomic_dec_unless_positive(atomic_t *p)
+{
+	int v, v1;
+	for (v = 0; v <= 0; v = v1) {
+		v1 = atomic_cmpxchg(p, v, v - 1);
+		if (likely(v1 == v))
+			return 1;
+	}
+	return 0;
+}
+#endif
+
+#ifndef CONFIG_ARCH_HAS_ATOMIC_OR
+static inline void atomic_or(int i, atomic_t *v)
+{
+	int old;
+	int new;
+
+	do {
+		old = atomic_read(v);
+		new = old | i;
+	} while (atomic_cmpxchg(v, old, new) != old);
+}
+#endif /* #ifndef CONFIG_ARCH_HAS_ATOMIC_OR */
+
+#include <asm-generic/atomic-long.h>
+#ifdef CONFIG_GENERIC_ATOMIC64
+#include <asm-generic/atomic64.h>
+#endif
+#endif /* _LINUX_ATOMIC_H */
diff --git a/include/linux/attribute_container.h b/include/linux/attribute_container.h
new file mode 100644
index 00000000..896c6892
--- /dev/null
+++ b/include/linux/attribute_container.h
@@ -0,0 +1,72 @@
+/*
+ * attribute_container.h - a generic container for all classes
+ *
+ * Copyright (c) 2005 - James Bottomley <James.Bottomley@steeleye.com>
+ *
+ * This file is licensed under GPLv2
+ */
+
+#ifndef _ATTRIBUTE_CONTAINER_H_
+#define _ATTRIBUTE_CONTAINER_H_
+
+#include <linux/list.h>
+#include <linux/klist.h>
+
+struct device;
+
+struct attribute_container {
+	struct list_head	node;
+	struct klist		containers;
+	struct class		*class;
+	const struct attribute_group *grp;
+	struct device_attribute **attrs;
+	int (*match)(struct attribute_container *, struct device *);
+#define	ATTRIBUTE_CONTAINER_NO_CLASSDEVS	0x01
+	unsigned long		flags;
+};
+
+static inline int
+attribute_container_no_classdevs(struct attribute_container *atc)
+{
+	return atc->flags & ATTRIBUTE_CONTAINER_NO_CLASSDEVS;
+}
+
+static inline void
+attribute_container_set_no_classdevs(struct attribute_container *atc)
+{
+	atc->flags |= ATTRIBUTE_CONTAINER_NO_CLASSDEVS;
+}
+
+int attribute_container_register(struct attribute_container *cont);
+int __must_check attribute_container_unregister(struct attribute_container *cont);
+void attribute_container_create_device(struct device *dev,
+				       int (*fn)(struct attribute_container *,
+						 struct device *,
+						 struct device *));
+void attribute_container_add_device(struct device *dev,
+				    int (*fn)(struct attribute_container *,
+					      struct device *,
+					      struct device *));
+void attribute_container_remove_device(struct device *dev,
+				       void (*fn)(struct attribute_container *,
+						  struct device *,
+						  struct device *));
+void attribute_container_device_trigger(struct device *dev, 
+					int (*fn)(struct attribute_container *,
+						  struct device *,
+						  struct device *));
+void attribute_container_trigger(struct device *dev, 
+				 int (*fn)(struct attribute_container *,
+					   struct device *));
+int attribute_container_add_attrs(struct device *classdev);
+int attribute_container_add_class_device(struct device *classdev);
+int attribute_container_add_class_device_adapter(struct attribute_container *cont,
+						 struct device *dev,
+						 struct device *classdev);
+void attribute_container_remove_attrs(struct device *classdev);
+void attribute_container_class_device_del(struct device *classdev);
+struct attribute_container *attribute_container_classdev_to_container(struct device *);
+struct device *attribute_container_find_class_device(struct attribute_container *, struct device *);
+struct device_attribute **attribute_container_classdev_to_attrs(const struct device *classdev);
+
+#endif
diff --git a/include/linux/audit.h b/include/linux/audit.h
new file mode 100644
index 00000000..ed3ef197
--- /dev/null
+++ b/include/linux/audit.h
@@ -0,0 +1,723 @@
+/* audit.h -- Auditing support
+ *
+ * Copyright 2003-2004 Red Hat Inc., Durham, North Carolina.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * Written by Rickard E. (Rik) Faith <faith@redhat.com>
+ *
+ */
+
+#ifndef _LINUX_AUDIT_H_
+#define _LINUX_AUDIT_H_
+
+#include <linux/types.h>
+#include <linux/elf-em.h>
+#include <linux/ptrace.h>
+
+/* The netlink messages for the audit system is divided into blocks:
+ * 1000 - 1099 are for commanding the audit system
+ * 1100 - 1199 user space trusted application messages
+ * 1200 - 1299 messages internal to the audit daemon
+ * 1300 - 1399 audit event messages
+ * 1400 - 1499 SE Linux use
+ * 1500 - 1599 kernel LSPP events
+ * 1600 - 1699 kernel crypto events
+ * 1700 - 1799 kernel anomaly records
+ * 1800 - 1899 kernel integrity events
+ * 1900 - 1999 future kernel use
+ * 2000 is for otherwise unclassified kernel audit messages (legacy)
+ * 2001 - 2099 unused (kernel)
+ * 2100 - 2199 user space anomaly records
+ * 2200 - 2299 user space actions taken in response to anomalies
+ * 2300 - 2399 user space generated LSPP events
+ * 2400 - 2499 user space crypto events
+ * 2500 - 2999 future user space (maybe integrity labels and related events)
+ *
+ * Messages from 1000-1199 are bi-directional. 1200-1299 & 2100 - 2999 are
+ * exclusively user space. 1300-2099 is kernel --> user space 
+ * communication.
+ */
+#define AUDIT_GET		1000	/* Get status */
+#define AUDIT_SET		1001	/* Set status (enable/disable/auditd) */
+#define AUDIT_LIST		1002	/* List syscall rules -- deprecated */
+#define AUDIT_ADD		1003	/* Add syscall rule -- deprecated */
+#define AUDIT_DEL		1004	/* Delete syscall rule -- deprecated */
+#define AUDIT_USER		1005	/* Message from userspace -- deprecated */
+#define AUDIT_LOGIN		1006	/* Define the login id and information */
+#define AUDIT_WATCH_INS		1007	/* Insert file/dir watch entry */
+#define AUDIT_WATCH_REM		1008	/* Remove file/dir watch entry */
+#define AUDIT_WATCH_LIST	1009	/* List all file/dir watches */
+#define AUDIT_SIGNAL_INFO	1010	/* Get info about sender of signal to auditd */
+#define AUDIT_ADD_RULE		1011	/* Add syscall filtering rule */
+#define AUDIT_DEL_RULE		1012	/* Delete syscall filtering rule */
+#define AUDIT_LIST_RULES	1013	/* List syscall filtering rules */
+#define AUDIT_TRIM		1014	/* Trim junk from watched tree */
+#define AUDIT_MAKE_EQUIV	1015	/* Append to watched tree */
+#define AUDIT_TTY_GET		1016	/* Get TTY auditing status */
+#define AUDIT_TTY_SET		1017	/* Set TTY auditing status */
+
+#define AUDIT_FIRST_USER_MSG	1100	/* Userspace messages mostly uninteresting to kernel */
+#define AUDIT_USER_AVC		1107	/* We filter this differently */
+#define AUDIT_USER_TTY		1124	/* Non-ICANON TTY input meaning */
+#define AUDIT_LAST_USER_MSG	1199
+#define AUDIT_FIRST_USER_MSG2	2100	/* More user space messages */
+#define AUDIT_LAST_USER_MSG2	2999
+ 
+#define AUDIT_DAEMON_START      1200    /* Daemon startup record */
+#define AUDIT_DAEMON_END        1201    /* Daemon normal stop record */
+#define AUDIT_DAEMON_ABORT      1202    /* Daemon error stop record */
+#define AUDIT_DAEMON_CONFIG     1203    /* Daemon config change */
+
+#define AUDIT_SYSCALL		1300	/* Syscall event */
+/* #define AUDIT_FS_WATCH	1301	 * Deprecated */
+#define AUDIT_PATH		1302	/* Filename path information */
+#define AUDIT_IPC		1303	/* IPC record */
+#define AUDIT_SOCKETCALL	1304	/* sys_socketcall arguments */
+#define AUDIT_CONFIG_CHANGE	1305	/* Audit system configuration change */
+#define AUDIT_SOCKADDR		1306	/* sockaddr copied as syscall arg */
+#define AUDIT_CWD		1307	/* Current working directory */
+#define AUDIT_EXECVE		1309	/* execve arguments */
+#define AUDIT_IPC_SET_PERM	1311	/* IPC new permissions record type */
+#define AUDIT_MQ_OPEN		1312	/* POSIX MQ open record type */
+#define AUDIT_MQ_SENDRECV	1313	/* POSIX MQ send/receive record type */
+#define AUDIT_MQ_NOTIFY		1314	/* POSIX MQ notify record type */
+#define AUDIT_MQ_GETSETATTR	1315	/* POSIX MQ get/set attribute record type */
+#define AUDIT_KERNEL_OTHER	1316	/* For use by 3rd party modules */
+#define AUDIT_FD_PAIR		1317    /* audit record for pipe/socketpair */
+#define AUDIT_OBJ_PID		1318	/* ptrace target */
+#define AUDIT_TTY		1319	/* Input on an administrative TTY */
+#define AUDIT_EOE		1320	/* End of multi-record event */
+#define AUDIT_BPRM_FCAPS	1321	/* Information about fcaps increasing perms */
+#define AUDIT_CAPSET		1322	/* Record showing argument to sys_capset */
+#define AUDIT_MMAP		1323	/* Record showing descriptor and flags in mmap */
+#define AUDIT_NETFILTER_PKT	1324	/* Packets traversing netfilter chains */
+#define AUDIT_NETFILTER_CFG	1325	/* Netfilter chain modifications */
+
+#define AUDIT_AVC		1400	/* SE Linux avc denial or grant */
+#define AUDIT_SELINUX_ERR	1401	/* Internal SE Linux Errors */
+#define AUDIT_AVC_PATH		1402	/* dentry, vfsmount pair from avc */
+#define AUDIT_MAC_POLICY_LOAD	1403	/* Policy file load */
+#define AUDIT_MAC_STATUS	1404	/* Changed enforcing,permissive,off */
+#define AUDIT_MAC_CONFIG_CHANGE	1405	/* Changes to booleans */
+#define AUDIT_MAC_UNLBL_ALLOW	1406	/* NetLabel: allow unlabeled traffic */
+#define AUDIT_MAC_CIPSOV4_ADD	1407	/* NetLabel: add CIPSOv4 DOI entry */
+#define AUDIT_MAC_CIPSOV4_DEL	1408	/* NetLabel: del CIPSOv4 DOI entry */
+#define AUDIT_MAC_MAP_ADD	1409	/* NetLabel: add LSM domain mapping */
+#define AUDIT_MAC_MAP_DEL	1410	/* NetLabel: del LSM domain mapping */
+#define AUDIT_MAC_IPSEC_ADDSA	1411	/* Not used */
+#define AUDIT_MAC_IPSEC_DELSA	1412	/* Not used  */
+#define AUDIT_MAC_IPSEC_ADDSPD	1413	/* Not used */
+#define AUDIT_MAC_IPSEC_DELSPD	1414	/* Not used */
+#define AUDIT_MAC_IPSEC_EVENT	1415	/* Audit an IPSec event */
+#define AUDIT_MAC_UNLBL_STCADD	1416	/* NetLabel: add a static label */
+#define AUDIT_MAC_UNLBL_STCDEL	1417	/* NetLabel: del a static label */
+
+#define AUDIT_FIRST_KERN_ANOM_MSG   1700
+#define AUDIT_LAST_KERN_ANOM_MSG    1799
+#define AUDIT_ANOM_PROMISCUOUS      1700 /* Device changed promiscuous mode */
+#define AUDIT_ANOM_ABEND            1701 /* Process ended abnormally */
+#define AUDIT_INTEGRITY_DATA	    1800 /* Data integrity verification */
+#define AUDIT_INTEGRITY_METADATA    1801 /* Metadata integrity verification */
+#define AUDIT_INTEGRITY_STATUS	    1802 /* Integrity enable status */
+#define AUDIT_INTEGRITY_HASH	    1803 /* Integrity HASH type */
+#define AUDIT_INTEGRITY_PCR	    1804 /* PCR invalidation msgs */
+#define AUDIT_INTEGRITY_RULE	    1805 /* policy rule */
+
+#define AUDIT_KERNEL		2000	/* Asynchronous audit record. NOT A REQUEST. */
+
+/* Rule flags */
+#define AUDIT_FILTER_USER	0x00	/* Apply rule to user-generated messages */
+#define AUDIT_FILTER_TASK	0x01	/* Apply rule at task creation (not syscall) */
+#define AUDIT_FILTER_ENTRY	0x02	/* Apply rule at syscall entry */
+#define AUDIT_FILTER_WATCH	0x03	/* Apply rule to file system watches */
+#define AUDIT_FILTER_EXIT	0x04	/* Apply rule at syscall exit */
+#define AUDIT_FILTER_TYPE	0x05	/* Apply rule at audit_log_start */
+
+#define AUDIT_NR_FILTERS	6
+
+#define AUDIT_FILTER_PREPEND	0x10	/* Prepend to front of list */
+
+/* Rule actions */
+#define AUDIT_NEVER    0	/* Do not build context if rule matches */
+#define AUDIT_POSSIBLE 1	/* Build context if rule matches  */
+#define AUDIT_ALWAYS   2	/* Generate audit record if rule matches */
+
+/* Rule structure sizes -- if these change, different AUDIT_ADD and
+ * AUDIT_LIST commands must be implemented. */
+#define AUDIT_MAX_FIELDS   64
+#define AUDIT_MAX_KEY_LEN  256
+#define AUDIT_BITMASK_SIZE 64
+#define AUDIT_WORD(nr) ((__u32)((nr)/32))
+#define AUDIT_BIT(nr)  (1 << ((nr) - AUDIT_WORD(nr)*32))
+
+#define AUDIT_SYSCALL_CLASSES 16
+#define AUDIT_CLASS_DIR_WRITE 0
+#define AUDIT_CLASS_DIR_WRITE_32 1
+#define AUDIT_CLASS_CHATTR 2
+#define AUDIT_CLASS_CHATTR_32 3
+#define AUDIT_CLASS_READ 4
+#define AUDIT_CLASS_READ_32 5
+#define AUDIT_CLASS_WRITE 6
+#define AUDIT_CLASS_WRITE_32 7
+#define AUDIT_CLASS_SIGNAL 8
+#define AUDIT_CLASS_SIGNAL_32 9
+
+/* This bitmask is used to validate user input.  It represents all bits that
+ * are currently used in an audit field constant understood by the kernel.
+ * If you are adding a new #define AUDIT_<whatever>, please ensure that
+ * AUDIT_UNUSED_BITS is updated if need be. */
+#define AUDIT_UNUSED_BITS	0x07FFFC00
+
+/* AUDIT_FIELD_COMPARE rule list */
+#define AUDIT_COMPARE_UID_TO_OBJ_UID	1
+#define AUDIT_COMPARE_GID_TO_OBJ_GID	2
+#define AUDIT_COMPARE_EUID_TO_OBJ_UID	3
+#define AUDIT_COMPARE_EGID_TO_OBJ_GID	4
+#define AUDIT_COMPARE_AUID_TO_OBJ_UID	5
+#define AUDIT_COMPARE_SUID_TO_OBJ_UID	6
+#define AUDIT_COMPARE_SGID_TO_OBJ_GID	7
+#define AUDIT_COMPARE_FSUID_TO_OBJ_UID	8
+#define AUDIT_COMPARE_FSGID_TO_OBJ_GID	9
+
+#define AUDIT_COMPARE_UID_TO_AUID	10
+#define AUDIT_COMPARE_UID_TO_EUID	11
+#define AUDIT_COMPARE_UID_TO_FSUID	12
+#define AUDIT_COMPARE_UID_TO_SUID	13
+
+#define AUDIT_COMPARE_AUID_TO_FSUID	14
+#define AUDIT_COMPARE_AUID_TO_SUID	15
+#define AUDIT_COMPARE_AUID_TO_EUID	16
+
+#define AUDIT_COMPARE_EUID_TO_SUID	17
+#define AUDIT_COMPARE_EUID_TO_FSUID	18
+
+#define AUDIT_COMPARE_SUID_TO_FSUID	19
+
+#define AUDIT_COMPARE_GID_TO_EGID	20
+#define AUDIT_COMPARE_GID_TO_FSGID	21
+#define AUDIT_COMPARE_GID_TO_SGID	22
+
+#define AUDIT_COMPARE_EGID_TO_FSGID	23
+#define AUDIT_COMPARE_EGID_TO_SGID	24
+#define AUDIT_COMPARE_SGID_TO_FSGID	25
+
+#define AUDIT_MAX_FIELD_COMPARE		AUDIT_COMPARE_SGID_TO_FSGID
+
+/* Rule fields */
+				/* These are useful when checking the
+				 * task structure at task creation time
+				 * (AUDIT_PER_TASK).  */
+#define AUDIT_PID	0
+#define AUDIT_UID	1
+#define AUDIT_EUID	2
+#define AUDIT_SUID	3
+#define AUDIT_FSUID	4
+#define AUDIT_GID	5
+#define AUDIT_EGID	6
+#define AUDIT_SGID	7
+#define AUDIT_FSGID	8
+#define AUDIT_LOGINUID	9
+#define AUDIT_PERS	10
+#define AUDIT_ARCH	11
+#define AUDIT_MSGTYPE	12
+#define AUDIT_SUBJ_USER	13	/* security label user */
+#define AUDIT_SUBJ_ROLE	14	/* security label role */
+#define AUDIT_SUBJ_TYPE	15	/* security label type */
+#define AUDIT_SUBJ_SEN	16	/* security label sensitivity label */
+#define AUDIT_SUBJ_CLR	17	/* security label clearance label */
+#define AUDIT_PPID	18
+#define AUDIT_OBJ_USER	19
+#define AUDIT_OBJ_ROLE	20
+#define AUDIT_OBJ_TYPE	21
+#define AUDIT_OBJ_LEV_LOW	22
+#define AUDIT_OBJ_LEV_HIGH	23
+
+				/* These are ONLY useful when checking
+				 * at syscall exit time (AUDIT_AT_EXIT). */
+#define AUDIT_DEVMAJOR	100
+#define AUDIT_DEVMINOR	101
+#define AUDIT_INODE	102
+#define AUDIT_EXIT	103
+#define AUDIT_SUCCESS   104	/* exit >= 0; value ignored */
+#define AUDIT_WATCH	105
+#define AUDIT_PERM	106
+#define AUDIT_DIR	107
+#define AUDIT_FILETYPE	108
+#define AUDIT_OBJ_UID	109
+#define AUDIT_OBJ_GID	110
+#define AUDIT_FIELD_COMPARE	111
+
+#define AUDIT_ARG0      200
+#define AUDIT_ARG1      (AUDIT_ARG0+1)
+#define AUDIT_ARG2      (AUDIT_ARG0+2)
+#define AUDIT_ARG3      (AUDIT_ARG0+3)
+
+#define AUDIT_FILTERKEY	210
+
+#define AUDIT_NEGATE			0x80000000
+
+/* These are the supported operators.
+ *	4  2  1  8
+ *	=  >  <  ?
+ *	----------
+ *	0  0  0	 0	00	nonsense
+ *	0  0  0	 1	08	&  bit mask
+ *	0  0  1	 0	10	<
+ *	0  1  0	 0	20	>
+ *	0  1  1	 0	30	!=
+ *	1  0  0	 0	40	=
+ *	1  0  0	 1	48	&=  bit test
+ *	1  0  1	 0	50	<=
+ *	1  1  0	 0	60	>=
+ *	1  1  1	 1	78	all operators
+ */
+#define AUDIT_BIT_MASK			0x08000000
+#define AUDIT_LESS_THAN			0x10000000
+#define AUDIT_GREATER_THAN		0x20000000
+#define AUDIT_NOT_EQUAL			0x30000000
+#define AUDIT_EQUAL			0x40000000
+#define AUDIT_BIT_TEST			(AUDIT_BIT_MASK|AUDIT_EQUAL)
+#define AUDIT_LESS_THAN_OR_EQUAL	(AUDIT_LESS_THAN|AUDIT_EQUAL)
+#define AUDIT_GREATER_THAN_OR_EQUAL	(AUDIT_GREATER_THAN|AUDIT_EQUAL)
+#define AUDIT_OPERATORS			(AUDIT_EQUAL|AUDIT_NOT_EQUAL|AUDIT_BIT_MASK)
+
+enum {
+	Audit_equal,
+	Audit_not_equal,
+	Audit_bitmask,
+	Audit_bittest,
+	Audit_lt,
+	Audit_gt,
+	Audit_le,
+	Audit_ge,
+	Audit_bad
+};
+
+/* Status symbols */
+				/* Mask values */
+#define AUDIT_STATUS_ENABLED		0x0001
+#define AUDIT_STATUS_FAILURE		0x0002
+#define AUDIT_STATUS_PID		0x0004
+#define AUDIT_STATUS_RATE_LIMIT		0x0008
+#define AUDIT_STATUS_BACKLOG_LIMIT	0x0010
+				/* Failure-to-log actions */
+#define AUDIT_FAIL_SILENT	0
+#define AUDIT_FAIL_PRINTK	1
+#define AUDIT_FAIL_PANIC	2
+
+/* distinguish syscall tables */
+#define __AUDIT_ARCH_64BIT 0x80000000
+#define __AUDIT_ARCH_LE	   0x40000000
+#define AUDIT_ARCH_ALPHA	(EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_ARM		(EM_ARM|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_ARMEB	(EM_ARM)
+#define AUDIT_ARCH_CRIS		(EM_CRIS|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_FRV		(EM_FRV)
+#define AUDIT_ARCH_H8300	(EM_H8_300)
+#define AUDIT_ARCH_I386		(EM_386|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_IA64		(EM_IA_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_M32R		(EM_M32R)
+#define AUDIT_ARCH_M68K		(EM_68K)
+#define AUDIT_ARCH_MIPS		(EM_MIPS)
+#define AUDIT_ARCH_MIPSEL	(EM_MIPS|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_MIPS64	(EM_MIPS|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_MIPSEL64	(EM_MIPS|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_PARISC	(EM_PARISC)
+#define AUDIT_ARCH_PARISC64	(EM_PARISC|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_PPC		(EM_PPC)
+#define AUDIT_ARCH_PPC64	(EM_PPC64|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_S390		(EM_S390)
+#define AUDIT_ARCH_S390X	(EM_S390|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_SH		(EM_SH)
+#define AUDIT_ARCH_SHEL		(EM_SH|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_SH64		(EM_SH|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_SHEL64	(EM_SH|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_SPARC	(EM_SPARC)
+#define AUDIT_ARCH_SPARC64	(EM_SPARCV9|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_X86_64	(EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+
+#define AUDIT_PERM_EXEC		1
+#define AUDIT_PERM_WRITE	2
+#define AUDIT_PERM_READ		4
+#define AUDIT_PERM_ATTR		8
+
+struct audit_status {
+	__u32		mask;		/* Bit mask for valid entries */
+	__u32		enabled;	/* 1 = enabled, 0 = disabled */
+	__u32		failure;	/* Failure-to-log action */
+	__u32		pid;		/* pid of auditd process */
+	__u32		rate_limit;	/* messages rate limit (per second) */
+	__u32		backlog_limit;	/* waiting messages limit */
+	__u32		lost;		/* messages lost */
+	__u32		backlog;	/* messages waiting in queue */
+};
+
+struct audit_tty_status {
+	__u32		enabled; /* 1 = enabled, 0 = disabled */
+};
+
+/* audit_rule_data supports filter rules with both integer and string
+ * fields.  It corresponds with AUDIT_ADD_RULE, AUDIT_DEL_RULE and
+ * AUDIT_LIST_RULES requests.
+ */
+struct audit_rule_data {
+	__u32		flags;	/* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */
+	__u32		action;	/* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */
+	__u32		field_count;
+	__u32		mask[AUDIT_BITMASK_SIZE]; /* syscall(s) affected */
+	__u32		fields[AUDIT_MAX_FIELDS];
+	__u32		values[AUDIT_MAX_FIELDS];
+	__u32		fieldflags[AUDIT_MAX_FIELDS];
+	__u32		buflen;	/* total length of string fields */
+	char		buf[0];	/* string fields buffer */
+};
+
+/* audit_rule is supported to maintain backward compatibility with
+ * userspace.  It supports integer fields only and corresponds to
+ * AUDIT_ADD, AUDIT_DEL and AUDIT_LIST requests.
+ */
+struct audit_rule {		/* for AUDIT_LIST, AUDIT_ADD, and AUDIT_DEL */
+	__u32		flags;	/* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */
+	__u32		action;	/* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */
+	__u32		field_count;
+	__u32		mask[AUDIT_BITMASK_SIZE];
+	__u32		fields[AUDIT_MAX_FIELDS];
+	__u32		values[AUDIT_MAX_FIELDS];
+};
+
+#ifdef __KERNEL__
+#include <linux/sched.h>
+
+struct audit_sig_info {
+	uid_t		uid;
+	pid_t		pid;
+	char		ctx[0];
+};
+
+struct audit_buffer;
+struct audit_context;
+struct inode;
+struct netlink_skb_parms;
+struct path;
+struct linux_binprm;
+struct mq_attr;
+struct mqstat;
+struct audit_watch;
+struct audit_tree;
+
+struct audit_krule {
+	int			vers_ops;
+	u32			flags;
+	u32			listnr;
+	u32			action;
+	u32			mask[AUDIT_BITMASK_SIZE];
+	u32			buflen; /* for data alloc on list rules */
+	u32			field_count;
+	char			*filterkey; /* ties events to rules */
+	struct audit_field	*fields;
+	struct audit_field	*arch_f; /* quick access to arch field */
+	struct audit_field	*inode_f; /* quick access to an inode field */
+	struct audit_watch	*watch;	/* associated watch */
+	struct audit_tree	*tree;	/* associated watched tree */
+	struct list_head	rlist;	/* entry in audit_{watch,tree}.rules list */
+	struct list_head	list;	/* for AUDIT_LIST* purposes only */
+	u64			prio;
+};
+
+struct audit_field {
+	u32				type;
+	u32				val;
+	u32				op;
+	char				*lsm_str;
+	void				*lsm_rule;
+};
+
+extern int __init audit_register_class(int class, unsigned *list);
+extern int audit_classify_syscall(int abi, unsigned syscall);
+extern int audit_classify_arch(int arch);
+#ifdef CONFIG_AUDITSYSCALL
+/* These are defined in auditsc.c */
+				/* Public API */
+extern int  audit_alloc(struct task_struct *task);
+extern void __audit_free(struct task_struct *task);
+extern void __audit_syscall_entry(int arch,
+				  int major, unsigned long a0, unsigned long a1,
+				  unsigned long a2, unsigned long a3);
+extern void __audit_syscall_exit(int ret_success, long ret_value);
+extern void __audit_getname(const char *name);
+extern void audit_putname(const char *name);
+extern void __audit_inode(const char *name, const struct dentry *dentry);
+extern void __audit_inode_child(const struct dentry *dentry,
+				const struct inode *parent);
+extern void __audit_seccomp(unsigned long syscall);
+extern void __audit_ptrace(struct task_struct *t);
+
+static inline int audit_dummy_context(void)
+{
+	void *p = current->audit_context;
+	return !p || *(int *)p;
+}
+static inline void audit_free(struct task_struct *task)
+{
+	if (unlikely(task->audit_context))
+		__audit_free(task);
+}
+static inline void audit_syscall_entry(int arch, int major, unsigned long a0,
+				       unsigned long a1, unsigned long a2,
+				       unsigned long a3)
+{
+	if (unlikely(!audit_dummy_context()))
+		__audit_syscall_entry(arch, major, a0, a1, a2, a3);
+}
+static inline void audit_syscall_exit(void *pt_regs)
+{
+	if (unlikely(current->audit_context)) {
+		int success = is_syscall_success(pt_regs);
+		int return_code = regs_return_value(pt_regs);
+
+		__audit_syscall_exit(success, return_code);
+	}
+}
+static inline void audit_getname(const char *name)
+{
+	if (unlikely(!audit_dummy_context()))
+		__audit_getname(name);
+}
+static inline void audit_inode(const char *name, const struct dentry *dentry) {
+	if (unlikely(!audit_dummy_context()))
+		__audit_inode(name, dentry);
+}
+static inline void audit_inode_child(const struct dentry *dentry,
+				     const struct inode *parent) {
+	if (unlikely(!audit_dummy_context()))
+		__audit_inode_child(dentry, parent);
+}
+void audit_core_dumps(long signr);
+
+static inline void audit_seccomp(unsigned long syscall)
+{
+	if (unlikely(!audit_dummy_context()))
+		__audit_seccomp(syscall);
+}
+
+static inline void audit_ptrace(struct task_struct *t)
+{
+	if (unlikely(!audit_dummy_context()))
+		__audit_ptrace(t);
+}
+
+				/* Private API (for audit.c only) */
+extern unsigned int audit_serial(void);
+extern int auditsc_get_stamp(struct audit_context *ctx,
+			      struct timespec *t, unsigned int *serial);
+extern int  audit_set_loginuid(uid_t loginuid);
+#define audit_get_loginuid(t) ((t)->loginuid)
+#define audit_get_sessionid(t) ((t)->sessionid)
+extern void audit_log_task_context(struct audit_buffer *ab);
+extern void __audit_ipc_obj(struct kern_ipc_perm *ipcp);
+extern void __audit_ipc_set_perm(unsigned long qbytes, uid_t uid, gid_t gid, umode_t mode);
+extern int __audit_bprm(struct linux_binprm *bprm);
+extern void __audit_socketcall(int nargs, unsigned long *args);
+extern int __audit_sockaddr(int len, void *addr);
+extern void __audit_fd_pair(int fd1, int fd2);
+extern void __audit_mq_open(int oflag, umode_t mode, struct mq_attr *attr);
+extern void __audit_mq_sendrecv(mqd_t mqdes, size_t msg_len, unsigned int msg_prio, const struct timespec *abs_timeout);
+extern void __audit_mq_notify(mqd_t mqdes, const struct sigevent *notification);
+extern void __audit_mq_getsetattr(mqd_t mqdes, struct mq_attr *mqstat);
+extern int __audit_log_bprm_fcaps(struct linux_binprm *bprm,
+				  const struct cred *new,
+				  const struct cred *old);
+extern void __audit_log_capset(pid_t pid, const struct cred *new, const struct cred *old);
+extern void __audit_mmap_fd(int fd, int flags);
+
+static inline void audit_ipc_obj(struct kern_ipc_perm *ipcp)
+{
+	if (unlikely(!audit_dummy_context()))
+		__audit_ipc_obj(ipcp);
+}
+static inline void audit_fd_pair(int fd1, int fd2)
+{
+	if (unlikely(!audit_dummy_context()))
+		__audit_fd_pair(fd1, fd2);
+}
+static inline void audit_ipc_set_perm(unsigned long qbytes, uid_t uid, gid_t gid, umode_t mode)
+{
+	if (unlikely(!audit_dummy_context()))
+		__audit_ipc_set_perm(qbytes, uid, gid, mode);
+}
+static inline int audit_bprm(struct linux_binprm *bprm)
+{
+	if (unlikely(!audit_dummy_context()))
+		return __audit_bprm(bprm);
+	return 0;
+}
+static inline void audit_socketcall(int nargs, unsigned long *args)
+{
+	if (unlikely(!audit_dummy_context()))
+		__audit_socketcall(nargs, args);
+}
+static inline int audit_sockaddr(int len, void *addr)
+{
+	if (unlikely(!audit_dummy_context()))
+		return __audit_sockaddr(len, addr);
+	return 0;
+}
+static inline void audit_mq_open(int oflag, umode_t mode, struct mq_attr *attr)
+{
+	if (unlikely(!audit_dummy_context()))
+		__audit_mq_open(oflag, mode, attr);
+}
+static inline void audit_mq_sendrecv(mqd_t mqdes, size_t msg_len, unsigned int msg_prio, const struct timespec *abs_timeout)
+{
+	if (unlikely(!audit_dummy_context()))
+		__audit_mq_sendrecv(mqdes, msg_len, msg_prio, abs_timeout);
+}
+static inline void audit_mq_notify(mqd_t mqdes, const struct sigevent *notification)
+{
+	if (unlikely(!audit_dummy_context()))
+		__audit_mq_notify(mqdes, notification);
+}
+static inline void audit_mq_getsetattr(mqd_t mqdes, struct mq_attr *mqstat)
+{
+	if (unlikely(!audit_dummy_context()))
+		__audit_mq_getsetattr(mqdes, mqstat);
+}
+
+static inline int audit_log_bprm_fcaps(struct linux_binprm *bprm,
+				       const struct cred *new,
+				       const struct cred *old)
+{
+	if (unlikely(!audit_dummy_context()))
+		return __audit_log_bprm_fcaps(bprm, new, old);
+	return 0;
+}
+
+static inline void audit_log_capset(pid_t pid, const struct cred *new,
+				   const struct cred *old)
+{
+	if (unlikely(!audit_dummy_context()))
+		__audit_log_capset(pid, new, old);
+}
+
+static inline void audit_mmap_fd(int fd, int flags)
+{
+	if (unlikely(!audit_dummy_context()))
+		__audit_mmap_fd(fd, flags);
+}
+
+extern int audit_n_rules;
+extern int audit_signals;
+#else /* CONFIG_AUDITSYSCALL */
+#define audit_alloc(t) ({ 0; })
+#define audit_free(t) do { ; } while (0)
+#define audit_syscall_entry(ta,a,b,c,d,e) do { ; } while (0)
+#define audit_syscall_exit(r) do { ; } while (0)
+#define audit_dummy_context() 1
+#define audit_getname(n) do { ; } while (0)
+#define audit_putname(n) do { ; } while (0)
+#define __audit_inode(n,d) do { ; } while (0)
+#define __audit_inode_child(i,p) do { ; } while (0)
+#define audit_inode(n,d) do { (void)(d); } while (0)
+#define audit_inode_child(i,p) do { ; } while (0)
+#define audit_core_dumps(i) do { ; } while (0)
+#define audit_seccomp(i) do { ; } while (0)
+#define auditsc_get_stamp(c,t,s) (0)
+#define audit_get_loginuid(t) (-1)
+#define audit_get_sessionid(t) (-1)
+#define audit_log_task_context(b) do { ; } while (0)
+#define audit_ipc_obj(i) ((void)0)
+#define audit_ipc_set_perm(q,u,g,m) ((void)0)
+#define audit_bprm(p) ({ 0; })
+#define audit_socketcall(n,a) ((void)0)
+#define audit_fd_pair(n,a) ((void)0)
+#define audit_sockaddr(len, addr) ({ 0; })
+#define audit_mq_open(o,m,a) ((void)0)
+#define audit_mq_sendrecv(d,l,p,t) ((void)0)
+#define audit_mq_notify(d,n) ((void)0)
+#define audit_mq_getsetattr(d,s) ((void)0)
+#define audit_log_bprm_fcaps(b, ncr, ocr) ({ 0; })
+#define audit_log_capset(pid, ncr, ocr) ((void)0)
+#define audit_mmap_fd(fd, flags) ((void)0)
+#define audit_ptrace(t) ((void)0)
+#define audit_n_rules 0
+#define audit_signals 0
+#endif /* CONFIG_AUDITSYSCALL */
+
+#ifdef CONFIG_AUDIT
+/* These are defined in audit.c */
+				/* Public API */
+extern __printf(4, 5)
+void audit_log(struct audit_context *ctx, gfp_t gfp_mask, int type,
+	       const char *fmt, ...);
+
+extern struct audit_buffer *audit_log_start(struct audit_context *ctx, gfp_t gfp_mask, int type);
+extern __printf(2, 3)
+void audit_log_format(struct audit_buffer *ab, const char *fmt, ...);
+extern void		    audit_log_end(struct audit_buffer *ab);
+extern int		    audit_string_contains_control(const char *string,
+							  size_t len);
+extern void		    audit_log_n_hex(struct audit_buffer *ab,
+					  const unsigned char *buf,
+					  size_t len);
+extern void		    audit_log_n_string(struct audit_buffer *ab,
+					       const char *buf,
+					       size_t n);
+#define audit_log_string(a,b) audit_log_n_string(a, b, strlen(b));
+extern void		    audit_log_n_untrustedstring(struct audit_buffer *ab,
+							const char *string,
+							size_t n);
+extern void		    audit_log_untrustedstring(struct audit_buffer *ab,
+						      const char *string);
+extern void		    audit_log_d_path(struct audit_buffer *ab,
+					     const char *prefix,
+					     const struct path *path);
+extern void		    audit_log_key(struct audit_buffer *ab,
+					  char *key);
+extern void		    audit_log_lost(const char *message);
+#ifdef CONFIG_SECURITY
+extern void 		    audit_log_secctx(struct audit_buffer *ab, u32 secid);
+#else
+#define audit_log_secctx(b,s) do { ; } while (0)
+#endif
+
+extern int		    audit_update_lsm_rules(void);
+
+				/* Private API (for audit.c only) */
+extern int audit_filter_user(struct netlink_skb_parms *cb);
+extern int audit_filter_type(int type);
+extern int  audit_receive_filter(int type, int pid, int uid, int seq,
+				void *data, size_t datasz, uid_t loginuid,
+				u32 sessionid, u32 sid);
+extern int audit_enabled;
+#else
+#define audit_log(c,g,t,f,...) do { ; } while (0)
+#define audit_log_start(c,g,t) ({ NULL; })
+#define audit_log_vformat(b,f,a) do { ; } while (0)
+#define audit_log_format(b,f,...) do { ; } while (0)
+#define audit_log_end(b) do { ; } while (0)
+#define audit_log_n_hex(a,b,l) do { ; } while (0)
+#define audit_log_n_string(a,c,l) do { ; } while (0)
+#define audit_log_string(a,c) do { ; } while (0)
+#define audit_log_n_untrustedstring(a,n,s) do { ; } while (0)
+#define audit_log_untrustedstring(a,s) do { ; } while (0)
+#define audit_log_d_path(b, p, d) do { ; } while (0)
+#define audit_log_key(b, k) do { ; } while (0)
+#define audit_log_secctx(b,s) do { ; } while (0)
+#define audit_enabled 0
+#endif
+#endif
+#endif
diff --git a/include/linux/auto_dev-ioctl.h b/include/linux/auto_dev-ioctl.h
new file mode 100644
index 00000000..850f39b3
--- /dev/null
+++ b/include/linux/auto_dev-ioctl.h
@@ -0,0 +1,229 @@
+/*
+ * Copyright 2008 Red Hat, Inc. All rights reserved.
+ * Copyright 2008 Ian Kent <raven@themaw.net>
+ *
+ * This file is part of the Linux kernel and is made available under
+ * the terms of the GNU General Public License, version 2, or at your
+ * option, any later version, incorporated herein by reference.
+ */
+
+#ifndef _LINUX_AUTO_DEV_IOCTL_H
+#define _LINUX_AUTO_DEV_IOCTL_H
+
+#include <linux/auto_fs.h>
+
+#ifdef __KERNEL__
+#include <linux/string.h>
+#else
+#include <string.h>
+#endif /* __KERNEL__ */
+
+#define AUTOFS_DEVICE_NAME		"autofs"
+
+#define AUTOFS_DEV_IOCTL_VERSION_MAJOR	1
+#define AUTOFS_DEV_IOCTL_VERSION_MINOR	0
+
+#define AUTOFS_DEVID_LEN		16
+
+#define AUTOFS_DEV_IOCTL_SIZE		sizeof(struct autofs_dev_ioctl)
+
+/*
+ * An ioctl interface for autofs mount point control.
+ */
+
+struct args_protover {
+	__u32	version;
+};
+
+struct args_protosubver {
+	__u32	sub_version;
+};
+
+struct args_openmount {
+	__u32	devid;
+};
+
+struct args_ready {
+	__u32	token;
+};
+
+struct args_fail {
+	__u32	token;
+	__s32	status;
+};
+
+struct args_setpipefd {
+	__s32	pipefd;
+};
+
+struct args_timeout {
+	__u64	timeout;
+};
+
+struct args_requester {
+	__u32	uid;
+	__u32	gid;
+};
+
+struct args_expire {
+	__u32	how;
+};
+
+struct args_askumount {
+	__u32	may_umount;
+};
+
+struct args_ismountpoint {
+	union {
+		struct args_in {
+			__u32	type;
+		} in;
+		struct args_out {
+			__u32	devid;
+			__u32	magic;
+		} out;
+	};
+};
+
+/*
+ * All the ioctls use this structure.
+ * When sending a path size must account for the total length
+ * of the chunk of memory otherwise is is the size of the
+ * structure.
+ */
+
+struct autofs_dev_ioctl {
+	__u32 ver_major;
+	__u32 ver_minor;
+	__u32 size;		/* total size of data passed in
+				 * including this struct */
+	__s32 ioctlfd;		/* automount command fd */
+
+	/* Command parameters */
+
+	union {
+		struct args_protover		protover;
+		struct args_protosubver		protosubver;
+		struct args_openmount		openmount;
+		struct args_ready		ready;
+		struct args_fail		fail;
+		struct args_setpipefd		setpipefd;
+		struct args_timeout		timeout;
+		struct args_requester		requester;
+		struct args_expire		expire;
+		struct args_askumount		askumount;
+		struct args_ismountpoint	ismountpoint;
+	};
+
+	char path[0];
+};
+
+static inline void init_autofs_dev_ioctl(struct autofs_dev_ioctl *in)
+{
+	memset(in, 0, sizeof(struct autofs_dev_ioctl));
+	in->ver_major = AUTOFS_DEV_IOCTL_VERSION_MAJOR;
+	in->ver_minor = AUTOFS_DEV_IOCTL_VERSION_MINOR;
+	in->size = sizeof(struct autofs_dev_ioctl);
+	in->ioctlfd = -1;
+	return;
+}
+
+/*
+ * If you change this make sure you make the corresponding change
+ * to autofs-dev-ioctl.c:lookup_ioctl()
+ */
+enum {
+	/* Get various version info */
+	AUTOFS_DEV_IOCTL_VERSION_CMD = 0x71,
+	AUTOFS_DEV_IOCTL_PROTOVER_CMD,
+	AUTOFS_DEV_IOCTL_PROTOSUBVER_CMD,
+
+	/* Open mount ioctl fd */
+	AUTOFS_DEV_IOCTL_OPENMOUNT_CMD,
+
+	/* Close mount ioctl fd */
+	AUTOFS_DEV_IOCTL_CLOSEMOUNT_CMD,
+
+	/* Mount/expire status returns */
+	AUTOFS_DEV_IOCTL_READY_CMD,
+	AUTOFS_DEV_IOCTL_FAIL_CMD,
+
+	/* Activate/deactivate autofs mount */
+	AUTOFS_DEV_IOCTL_SETPIPEFD_CMD,
+	AUTOFS_DEV_IOCTL_CATATONIC_CMD,
+
+	/* Expiry timeout */
+	AUTOFS_DEV_IOCTL_TIMEOUT_CMD,
+
+	/* Get mount last requesting uid and gid */
+	AUTOFS_DEV_IOCTL_REQUESTER_CMD,
+
+	/* Check for eligible expire candidates */
+	AUTOFS_DEV_IOCTL_EXPIRE_CMD,
+
+	/* Request busy status */
+	AUTOFS_DEV_IOCTL_ASKUMOUNT_CMD,
+
+	/* Check if path is a mountpoint */
+	AUTOFS_DEV_IOCTL_ISMOUNTPOINT_CMD,
+};
+
+#define AUTOFS_IOCTL 0x93
+
+#define AUTOFS_DEV_IOCTL_VERSION \
+	_IOWR(AUTOFS_IOCTL, \
+	      AUTOFS_DEV_IOCTL_VERSION_CMD, struct autofs_dev_ioctl)
+
+#define AUTOFS_DEV_IOCTL_PROTOVER \
+	_IOWR(AUTOFS_IOCTL, \
+	      AUTOFS_DEV_IOCTL_PROTOVER_CMD, struct autofs_dev_ioctl)
+
+#define AUTOFS_DEV_IOCTL_PROTOSUBVER \
+	_IOWR(AUTOFS_IOCTL, \
+	      AUTOFS_DEV_IOCTL_PROTOSUBVER_CMD, struct autofs_dev_ioctl)
+
+#define AUTOFS_DEV_IOCTL_OPENMOUNT \
+	_IOWR(AUTOFS_IOCTL, \
+	      AUTOFS_DEV_IOCTL_OPENMOUNT_CMD, struct autofs_dev_ioctl)
+
+#define AUTOFS_DEV_IOCTL_CLOSEMOUNT \
+	_IOWR(AUTOFS_IOCTL, \
+	      AUTOFS_DEV_IOCTL_CLOSEMOUNT_CMD, struct autofs_dev_ioctl)
+
+#define AUTOFS_DEV_IOCTL_READY \
+	_IOWR(AUTOFS_IOCTL, \
+	      AUTOFS_DEV_IOCTL_READY_CMD, struct autofs_dev_ioctl)
+
+#define AUTOFS_DEV_IOCTL_FAIL \
+	_IOWR(AUTOFS_IOCTL, \
+	      AUTOFS_DEV_IOCTL_FAIL_CMD, struct autofs_dev_ioctl)
+
+#define AUTOFS_DEV_IOCTL_SETPIPEFD \
+	_IOWR(AUTOFS_IOCTL, \
+	      AUTOFS_DEV_IOCTL_SETPIPEFD_CMD, struct autofs_dev_ioctl)
+
+#define AUTOFS_DEV_IOCTL_CATATONIC \
+	_IOWR(AUTOFS_IOCTL, \
+	      AUTOFS_DEV_IOCTL_CATATONIC_CMD, struct autofs_dev_ioctl)
+
+#define AUTOFS_DEV_IOCTL_TIMEOUT \
+	_IOWR(AUTOFS_IOCTL, \
+	      AUTOFS_DEV_IOCTL_TIMEOUT_CMD, struct autofs_dev_ioctl)
+
+#define AUTOFS_DEV_IOCTL_REQUESTER \
+	_IOWR(AUTOFS_IOCTL, \
+	      AUTOFS_DEV_IOCTL_REQUESTER_CMD, struct autofs_dev_ioctl)
+
+#define AUTOFS_DEV_IOCTL_EXPIRE \
+	_IOWR(AUTOFS_IOCTL, \
+	      AUTOFS_DEV_IOCTL_EXPIRE_CMD, struct autofs_dev_ioctl)
+
+#define AUTOFS_DEV_IOCTL_ASKUMOUNT \
+	_IOWR(AUTOFS_IOCTL, \
+	      AUTOFS_DEV_IOCTL_ASKUMOUNT_CMD, struct autofs_dev_ioctl)
+
+#define AUTOFS_DEV_IOCTL_ISMOUNTPOINT \
+	_IOWR(AUTOFS_IOCTL, \
+	      AUTOFS_DEV_IOCTL_ISMOUNTPOINT_CMD, struct autofs_dev_ioctl)
+
+#endif	/* _LINUX_AUTO_DEV_IOCTL_H */
diff --git a/include/linux/auto_fs.h b/include/linux/auto_fs.h
new file mode 100644
index 00000000..da64e150
--- /dev/null
+++ b/include/linux/auto_fs.h
@@ -0,0 +1,86 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *   
+ * linux/include/linux/auto_fs.h
+ *
+ *   Copyright 1997 Transmeta Corporation - All Rights Reserved
+ *
+ * This file is part of the Linux kernel and is made available under
+ * the terms of the GNU General Public License, version 2, or at your
+ * option, any later version, incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+
+#ifndef _LINUX_AUTO_FS_H
+#define _LINUX_AUTO_FS_H
+
+#include <linux/types.h>
+#ifdef __KERNEL__
+#include <linux/fs.h>
+#include <linux/limits.h>
+#include <linux/ioctl.h>
+#else
+#include <sys/ioctl.h>
+#endif /* __KERNEL__ */
+
+/* This file describes autofs v3 */
+#define AUTOFS_PROTO_VERSION	3
+
+/* Range of protocol versions defined */
+#define AUTOFS_MAX_PROTO_VERSION	AUTOFS_PROTO_VERSION
+#define AUTOFS_MIN_PROTO_VERSION	AUTOFS_PROTO_VERSION
+
+/*
+ * Architectures where both 32- and 64-bit binaries can be executed
+ * on 64-bit kernels need this.  This keeps the structure format
+ * uniform, and makes sure the wait_queue_token isn't too big to be
+ * passed back down to the kernel.
+ *
+ * This assumes that on these architectures:
+ * mode     32 bit    64 bit
+ * -------------------------
+ * int      32 bit    32 bit
+ * long     32 bit    64 bit
+ *
+ * If so, 32-bit user-space code should be backwards compatible.
+ */
+
+#if defined(__sparc__) || defined(__mips__) || defined(__x86_64__) \
+ || defined(__powerpc__) || defined(__s390__)
+typedef unsigned int autofs_wqt_t;
+#else
+typedef unsigned long autofs_wqt_t;
+#endif
+
+/* Packet types */
+#define autofs_ptype_missing	0	/* Missing entry (mount request) */
+#define autofs_ptype_expire	1	/* Expire entry (umount request) */
+
+struct autofs_packet_hdr {
+	int proto_version;		/* Protocol version */
+	int type;			/* Type of packet */
+};
+
+struct autofs_packet_missing {
+	struct autofs_packet_hdr hdr;
+        autofs_wqt_t wait_queue_token;
+	int len;
+	char name[NAME_MAX+1];
+};	
+
+/* v3 expire (via ioctl) */
+struct autofs_packet_expire {
+	struct autofs_packet_hdr hdr;
+	int len;
+	char name[NAME_MAX+1];
+};
+
+#define AUTOFS_IOC_READY      _IO(0x93,0x60)
+#define AUTOFS_IOC_FAIL       _IO(0x93,0x61)
+#define AUTOFS_IOC_CATATONIC  _IO(0x93,0x62)
+#define AUTOFS_IOC_PROTOVER   _IOR(0x93,0x63,int)
+#define AUTOFS_IOC_SETTIMEOUT32 _IOWR(0x93,0x64,compat_ulong_t)
+#define AUTOFS_IOC_SETTIMEOUT _IOWR(0x93,0x64,unsigned long)
+#define AUTOFS_IOC_EXPIRE     _IOR(0x93,0x65,struct autofs_packet_expire)
+
+#endif /* _LINUX_AUTO_FS_H */
diff --git a/include/linux/auto_fs4.h b/include/linux/auto_fs4.h
new file mode 100644
index 00000000..e02982fa
--- /dev/null
+++ b/include/linux/auto_fs4.h
@@ -0,0 +1,164 @@
+/* -*- c -*-
+ * linux/include/linux/auto_fs4.h
+ *
+ * Copyright 1999-2000 Jeremy Fitzhardinge <jeremy@goop.org>
+ *
+ * This file is part of the Linux kernel and is made available under
+ * the terms of the GNU General Public License, version 2, or at your
+ * option, any later version, incorporated herein by reference.
+ */
+
+#ifndef _LINUX_AUTO_FS4_H
+#define _LINUX_AUTO_FS4_H
+
+/* Include common v3 definitions */
+#include <linux/types.h>
+#include <linux/auto_fs.h>
+
+/* autofs v4 definitions */
+#undef AUTOFS_PROTO_VERSION
+#undef AUTOFS_MIN_PROTO_VERSION
+#undef AUTOFS_MAX_PROTO_VERSION
+
+#define AUTOFS_PROTO_VERSION		5
+#define AUTOFS_MIN_PROTO_VERSION	3
+#define AUTOFS_MAX_PROTO_VERSION	5
+
+#define AUTOFS_PROTO_SUBVERSION		2
+
+/* Mask for expire behaviour */
+#define AUTOFS_EXP_IMMEDIATE		1
+#define AUTOFS_EXP_LEAVES		2
+
+#define AUTOFS_TYPE_ANY			0U
+#define AUTOFS_TYPE_INDIRECT		1U
+#define AUTOFS_TYPE_DIRECT		2U
+#define AUTOFS_TYPE_OFFSET		4U
+
+static inline void set_autofs_type_indirect(unsigned int *type)
+{
+	*type = AUTOFS_TYPE_INDIRECT;
+	return;
+}
+
+static inline unsigned int autofs_type_indirect(unsigned int type)
+{
+	return (type == AUTOFS_TYPE_INDIRECT);
+}
+
+static inline void set_autofs_type_direct(unsigned int *type)
+{
+	*type = AUTOFS_TYPE_DIRECT;
+	return;
+}
+
+static inline unsigned int autofs_type_direct(unsigned int type)
+{
+	return (type == AUTOFS_TYPE_DIRECT);
+}
+
+static inline void set_autofs_type_offset(unsigned int *type)
+{
+	*type = AUTOFS_TYPE_OFFSET;
+	return;
+}
+
+static inline unsigned int autofs_type_offset(unsigned int type)
+{
+	return (type == AUTOFS_TYPE_OFFSET);
+}
+
+static inline unsigned int autofs_type_trigger(unsigned int type)
+{
+	return (type == AUTOFS_TYPE_DIRECT || type == AUTOFS_TYPE_OFFSET);
+}
+
+/*
+ * This isn't really a type as we use it to say "no type set" to
+ * indicate we want to search for "any" mount in the
+ * autofs_dev_ioctl_ismountpoint() device ioctl function.
+ */
+static inline void set_autofs_type_any(unsigned int *type)
+{
+	*type = AUTOFS_TYPE_ANY;
+	return;
+}
+
+static inline unsigned int autofs_type_any(unsigned int type)
+{
+	return (type == AUTOFS_TYPE_ANY);
+}
+
+/* Daemon notification packet types */
+enum autofs_notify {
+	NFY_NONE,
+	NFY_MOUNT,
+	NFY_EXPIRE
+};
+
+/* Kernel protocol version 4 packet types */
+
+/* Expire entry (umount request) */
+#define autofs_ptype_expire_multi	2
+
+/* Kernel protocol version 5 packet types */
+
+/* Indirect mount missing and expire requests. */
+#define autofs_ptype_missing_indirect	3
+#define autofs_ptype_expire_indirect	4
+
+/* Direct mount missing and expire requests */
+#define autofs_ptype_missing_direct	5
+#define autofs_ptype_expire_direct	6
+
+/* v4 multi expire (via pipe) */
+struct autofs_packet_expire_multi {
+	struct autofs_packet_hdr hdr;
+        autofs_wqt_t wait_queue_token;
+	int len;
+	char name[NAME_MAX+1];
+};
+
+union autofs_packet_union {
+	struct autofs_packet_hdr hdr;
+	struct autofs_packet_missing missing;
+	struct autofs_packet_expire expire;
+	struct autofs_packet_expire_multi expire_multi;
+};
+
+/* autofs v5 common packet struct */
+struct autofs_v5_packet {
+	struct autofs_packet_hdr hdr;
+	autofs_wqt_t wait_queue_token;
+	__u32 dev;
+	__u64 ino;
+	__u32 uid;
+	__u32 gid;
+	__u32 pid;
+	__u32 tgid;
+	__u32 len;
+	char name[NAME_MAX+1];
+};
+
+typedef struct autofs_v5_packet autofs_packet_missing_indirect_t;
+typedef struct autofs_v5_packet autofs_packet_expire_indirect_t;
+typedef struct autofs_v5_packet autofs_packet_missing_direct_t;
+typedef struct autofs_v5_packet autofs_packet_expire_direct_t;
+
+union autofs_v5_packet_union {
+	struct autofs_packet_hdr hdr;
+	struct autofs_v5_packet v5_packet;
+	autofs_packet_missing_indirect_t missing_indirect;
+	autofs_packet_expire_indirect_t expire_indirect;
+	autofs_packet_missing_direct_t missing_direct;
+	autofs_packet_expire_direct_t expire_direct;
+};
+
+#define AUTOFS_IOC_EXPIRE_MULTI		_IOW(0x93,0x66,int)
+#define AUTOFS_IOC_EXPIRE_INDIRECT	AUTOFS_IOC_EXPIRE_MULTI
+#define AUTOFS_IOC_EXPIRE_DIRECT	AUTOFS_IOC_EXPIRE_MULTI
+#define AUTOFS_IOC_PROTOSUBVER		_IOR(0x93,0x67,int)
+#define AUTOFS_IOC_ASKUMOUNT		_IOR(0x93,0x70,int)
+
+
+#endif /* _LINUX_AUTO_FS4_H */
diff --git a/include/linux/auxvec.h b/include/linux/auxvec.h
new file mode 100644
index 00000000..f3b5d4e3
--- /dev/null
+++ b/include/linux/auxvec.h
@@ -0,0 +1,39 @@
+#ifndef _LINUX_AUXVEC_H
+#define _LINUX_AUXVEC_H
+
+#include <asm/auxvec.h>
+
+/* Symbolic values for the entries in the auxiliary table
+   put on the initial stack */
+#define AT_NULL   0	/* end of vector */
+#define AT_IGNORE 1	/* entry should be ignored */
+#define AT_EXECFD 2	/* file descriptor of program */
+#define AT_PHDR   3	/* program headers for program */
+#define AT_PHENT  4	/* size of program header entry */
+#define AT_PHNUM  5	/* number of program headers */
+#define AT_PAGESZ 6	/* system page size */
+#define AT_BASE   7	/* base address of interpreter */
+#define AT_FLAGS  8	/* flags */
+#define AT_ENTRY  9	/* entry point of program */
+#define AT_NOTELF 10	/* program is not ELF */
+#define AT_UID    11	/* real uid */
+#define AT_EUID   12	/* effective uid */
+#define AT_GID    13	/* real gid */
+#define AT_EGID   14	/* effective gid */
+#define AT_PLATFORM 15  /* string identifying CPU for optimizations */
+#define AT_HWCAP  16    /* arch dependent hints at CPU capabilities */
+#define AT_CLKTCK 17	/* frequency at which times() increments */
+/* AT_* values 18 through 22 are reserved */
+#define AT_SECURE 23   /* secure mode boolean */
+#define AT_BASE_PLATFORM 24	/* string identifying real platform, may
+				 * differ from AT_PLATFORM. */
+#define AT_RANDOM 25	/* address of 16 random bytes */
+
+#define AT_EXECFN  31	/* filename of program */
+
+#ifdef __KERNEL__
+#define AT_VECTOR_SIZE_BASE 19 /* NEW_AUX_ENT entries in auxiliary table */
+  /* number of "#define AT_.*" above, minus {AT_NULL, AT_IGNORE, AT_NOTELF} */
+#endif
+
+#endif /* _LINUX_AUXVEC_H */
diff --git a/include/linux/average.h b/include/linux/average.h
new file mode 100644
index 00000000..c6028fd7
--- /dev/null
+++ b/include/linux/average.h
@@ -0,0 +1,30 @@
+#ifndef _LINUX_AVERAGE_H
+#define _LINUX_AVERAGE_H
+
+/* Exponentially weighted moving average (EWMA) */
+
+/* For more documentation see lib/average.c */
+
+struct ewma {
+	unsigned long internal;
+	unsigned long factor;
+	unsigned long weight;
+};
+
+extern void ewma_init(struct ewma *avg, unsigned long factor,
+		      unsigned long weight);
+
+extern struct ewma *ewma_add(struct ewma *avg, unsigned long val);
+
+/**
+ * ewma_read() - Get average value
+ * @avg: Average structure
+ *
+ * Returns the average value held in @avg.
+ */
+static inline unsigned long ewma_read(const struct ewma *avg)
+{
+	return avg->internal >> avg->factor;
+}
+
+#endif /* _LINUX_AVERAGE_H */
diff --git a/include/linux/ax25.h b/include/linux/ax25.h
new file mode 100644
index 00000000..74c89a41
--- /dev/null
+++ b/include/linux/ax25.h
@@ -0,0 +1,116 @@
+/*
+ * These are the public elements of the Linux kernel AX.25 code. A similar
+ * file netrom.h exists for the NET/ROM protocol.
+ */
+
+#ifndef	AX25_KERNEL_H
+#define	AX25_KERNEL_H
+
+#include <linux/socket.h>
+
+#define AX25_MTU	256
+#define AX25_MAX_DIGIS  8
+
+#define AX25_WINDOW	1
+#define AX25_T1		2
+#define AX25_N2		3
+#define AX25_T3		4
+#define AX25_T2		5
+#define	AX25_BACKOFF	6
+#define	AX25_EXTSEQ	7
+#define	AX25_PIDINCL	8
+#define AX25_IDLE	9
+#define AX25_PACLEN	10
+#define AX25_IAMDIGI	12
+
+#define AX25_KILL	99
+
+#define SIOCAX25GETUID		(SIOCPROTOPRIVATE+0)
+#define SIOCAX25ADDUID		(SIOCPROTOPRIVATE+1)
+#define SIOCAX25DELUID		(SIOCPROTOPRIVATE+2)
+#define SIOCAX25NOUID		(SIOCPROTOPRIVATE+3)
+#define SIOCAX25OPTRT		(SIOCPROTOPRIVATE+7)
+#define SIOCAX25CTLCON		(SIOCPROTOPRIVATE+8)
+#define SIOCAX25GETINFOOLD	(SIOCPROTOPRIVATE+9)
+#define SIOCAX25ADDFWD		(SIOCPROTOPRIVATE+10)
+#define SIOCAX25DELFWD		(SIOCPROTOPRIVATE+11)
+#define SIOCAX25DEVCTL          (SIOCPROTOPRIVATE+12)
+#define SIOCAX25GETINFO         (SIOCPROTOPRIVATE+13)
+
+#define AX25_SET_RT_IPMODE	2
+
+#define AX25_NOUID_DEFAULT	0
+#define AX25_NOUID_BLOCK	1
+
+typedef struct {
+	char		ax25_call[7];	/* 6 call + SSID (shifted ascii!) */
+} ax25_address;
+
+struct sockaddr_ax25 {
+	__kernel_sa_family_t sax25_family;
+	ax25_address	sax25_call;
+	int		sax25_ndigis;
+	/* Digipeater ax25_address sets follow */
+};
+
+#define sax25_uid	sax25_ndigis
+
+struct full_sockaddr_ax25 {
+	struct sockaddr_ax25 fsa_ax25;
+	ax25_address	fsa_digipeater[AX25_MAX_DIGIS];
+};
+
+struct ax25_routes_struct {
+	ax25_address	port_addr;
+	ax25_address	dest_addr;
+	unsigned char	digi_count;
+	ax25_address	digi_addr[AX25_MAX_DIGIS];
+};
+
+struct ax25_route_opt_struct {
+	ax25_address	port_addr;
+	ax25_address	dest_addr;
+	int		cmd;
+	int		arg;
+};
+
+struct ax25_ctl_struct {
+        ax25_address            port_addr;
+        ax25_address            source_addr;
+        ax25_address            dest_addr;
+        unsigned int            cmd;
+        unsigned long           arg;
+        unsigned char           digi_count;
+        ax25_address            digi_addr[AX25_MAX_DIGIS];
+};
+
+/* this will go away. Please do not export to user land */
+struct ax25_info_struct_deprecated {
+	unsigned int	n2, n2count;
+	unsigned int	t1, t1timer;
+	unsigned int	t2, t2timer;
+	unsigned int	t3, t3timer;
+	unsigned int	idle, idletimer;
+	unsigned int	state;
+	unsigned int	rcv_q, snd_q;
+};
+
+struct ax25_info_struct {
+	unsigned int	n2, n2count;
+	unsigned int	t1, t1timer;
+	unsigned int	t2, t2timer;
+	unsigned int	t3, t3timer;
+	unsigned int	idle, idletimer;
+	unsigned int	state;
+	unsigned int	rcv_q, snd_q;
+	unsigned int	vs, vr, va, vs_max;
+	unsigned int	paclen;
+	unsigned int	window;
+};
+
+struct ax25_fwd_struct {
+	ax25_address	port_from;
+	ax25_address	port_to;
+};
+
+#endif
diff --git a/include/linux/b1lli.h b/include/linux/b1lli.h
new file mode 100644
index 00000000..713f7126
--- /dev/null
+++ b/include/linux/b1lli.h
@@ -0,0 +1,73 @@
+/* $Id: b1lli.h,v 1.8.8.3 2001/09/23 22:25:05 kai Exp $
+ *
+ * ISDN lowlevel-module for AVM B1-card.
+ *
+ * Copyright 1996 by Carsten Paeth (calle@calle.in-berlin.de)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef _B1LLI_H_
+#define _B1LLI_H_
+/*
+ * struct for loading t4 file 
+ */
+typedef struct avmb1_t4file {
+	int len;
+	unsigned char *data;
+} avmb1_t4file;
+
+typedef struct avmb1_loaddef {
+	int contr;
+	avmb1_t4file t4file;
+} avmb1_loaddef;
+
+typedef struct avmb1_loadandconfigdef {
+	int contr;
+	avmb1_t4file t4file;
+        avmb1_t4file t4config; 
+} avmb1_loadandconfigdef;
+
+typedef struct avmb1_resetdef {
+	int contr;
+} avmb1_resetdef;
+
+typedef struct avmb1_getdef {
+	int contr;
+	int cardtype;
+	int cardstate;
+} avmb1_getdef;
+
+/*
+ * struct for adding new cards 
+ */
+typedef struct avmb1_carddef {
+	int port;
+	int irq;
+} avmb1_carddef;
+
+#define AVM_CARDTYPE_B1		0
+#define AVM_CARDTYPE_T1		1
+#define AVM_CARDTYPE_M1		2
+#define AVM_CARDTYPE_M2		3
+
+typedef struct avmb1_extcarddef {
+	int port;
+	int irq;
+        int cardtype;
+        int cardnr;  /* for HEMA/T1 */
+} avmb1_extcarddef;
+
+#define	AVMB1_LOAD		0	/* load image to card */
+#define AVMB1_ADDCARD		1	/* add a new card - OBSOLETE */
+#define AVMB1_RESETCARD		2	/* reset a card */
+#define	AVMB1_LOAD_AND_CONFIG	3	/* load image and config to card */
+#define	AVMB1_ADDCARD_WITH_TYPE	4	/* add a new card, with cardtype */
+#define AVMB1_GET_CARDINFO	5	/* get cardtype */
+#define AVMB1_REMOVECARD	6	/* remove a card - OBSOLETE */
+
+#define	AVMB1_REGISTERCARD_IS_OBSOLETE
+
+#endif				/* _B1LLI_H_ */
diff --git a/include/linux/b1pcmcia.h b/include/linux/b1pcmcia.h
new file mode 100644
index 00000000..12a867c6
--- /dev/null
+++ b/include/linux/b1pcmcia.h
@@ -0,0 +1,21 @@
+/* $Id: b1pcmcia.h,v 1.1.8.2 2001/09/23 22:25:05 kai Exp $
+ *
+ * Exported functions of module b1pcmcia to be called by
+ * avm_cs card services module.
+ *
+ * Copyright 1999 by Carsten Paeth (calle@calle.in-berlin.de)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef _B1PCMCIA_H_
+#define _B1PCMCIA_H_
+
+int b1pcmcia_addcard_b1(unsigned int port, unsigned irq);
+int b1pcmcia_addcard_m1(unsigned int port, unsigned irq);
+int b1pcmcia_addcard_m2(unsigned int port, unsigned irq);
+int b1pcmcia_delcard(unsigned int port, unsigned irq);
+
+#endif	/* _B1PCMCIA_H_ */
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
new file mode 100644
index 00000000..b1038bd6
--- /dev/null
+++ b/include/linux/backing-dev.h
@@ -0,0 +1,356 @@
+/*
+ * include/linux/backing-dev.h
+ *
+ * low-level device information and state which is propagated up through
+ * to high-level code.
+ */
+
+#ifndef _LINUX_BACKING_DEV_H
+#define _LINUX_BACKING_DEV_H
+
+#include <linux/percpu_counter.h>
+#include <linux/log2.h>
+#include <linux/proportions.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/writeback.h>
+#include <linux/atomic.h>
+
+struct page;
+struct device;
+struct dentry;
+
+/*
+ * Bits in backing_dev_info.state
+ */
+enum bdi_state {
+	BDI_pending,		/* On its way to being activated */
+	BDI_wb_alloc,		/* Default embedded wb allocated */
+	BDI_async_congested,	/* The async (write) queue is getting full */
+	BDI_sync_congested,	/* The sync queue is getting full */
+	BDI_registered,		/* bdi_register() was done */
+	BDI_writeback_running,	/* Writeback is in progress */
+	BDI_unused,		/* Available bits start here */
+};
+
+typedef int (congested_fn)(void *, int);
+
+enum bdi_stat_item {
+	BDI_RECLAIMABLE,
+	BDI_WRITEBACK,
+	BDI_DIRTIED,
+	BDI_WRITTEN,
+	NR_BDI_STAT_ITEMS
+};
+
+#define BDI_STAT_BATCH (8*(1+ilog2(nr_cpu_ids)))
+
+struct bdi_writeback {
+	struct backing_dev_info *bdi;	/* our parent bdi */
+	unsigned int nr;
+
+	unsigned long last_old_flush;	/* last old data flush */
+	unsigned long last_active;	/* last time bdi thread was active */
+
+	struct task_struct *task;	/* writeback thread */
+	struct timer_list wakeup_timer; /* used for delayed bdi thread wakeup */
+	struct list_head b_dirty;	/* dirty inodes */
+	struct list_head b_io;		/* parked for writeback */
+	struct list_head b_more_io;	/* parked for more writeback */
+	spinlock_t list_lock;		/* protects the b_* lists */
+};
+
+struct backing_dev_info {
+	struct list_head bdi_list;
+	unsigned long ra_pages;	/* max readahead in PAGE_CACHE_SIZE units */
+	unsigned long state;	/* Always use atomic bitops on this */
+	unsigned int capabilities; /* Device capabilities */
+	congested_fn *congested_fn; /* Function pointer if device is md/dm */
+	void *congested_data;	/* Pointer to aux data for congested func */
+
+	char *name;
+
+	struct percpu_counter bdi_stat[NR_BDI_STAT_ITEMS];
+
+	unsigned long bw_time_stamp;	/* last time write bw is updated */
+	unsigned long dirtied_stamp;
+	unsigned long written_stamp;	/* pages written at bw_time_stamp */
+	unsigned long write_bandwidth;	/* the estimated write bandwidth */
+	unsigned long avg_write_bandwidth; /* further smoothed write bw */
+
+	/*
+	 * The base dirty throttle rate, re-calculated on every 200ms.
+	 * All the bdi tasks' dirty rate will be curbed under it.
+	 * @dirty_ratelimit tracks the estimated @balanced_dirty_ratelimit
+	 * in small steps and is much more smooth/stable than the latter.
+	 */
+	unsigned long dirty_ratelimit;
+	unsigned long balanced_dirty_ratelimit;
+
+	struct prop_local_percpu completions;
+	int dirty_exceeded;
+
+	unsigned int min_ratio;
+	unsigned int max_ratio, max_prop_frac;
+
+	struct bdi_writeback wb;  /* default writeback info for this bdi */
+	spinlock_t wb_lock;	  /* protects work_list */
+
+	struct list_head work_list;
+
+	struct device *dev;
+
+	struct timer_list laptop_mode_wb_timer;
+
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *debug_dir;
+	struct dentry *debug_stats;
+#endif
+};
+
+int bdi_init(struct backing_dev_info *bdi);
+void bdi_destroy(struct backing_dev_info *bdi);
+
+int bdi_register(struct backing_dev_info *bdi, struct device *parent,
+		const char *fmt, ...);
+int bdi_register_dev(struct backing_dev_info *bdi, dev_t dev);
+void bdi_unregister(struct backing_dev_info *bdi);
+int bdi_setup_and_register(struct backing_dev_info *, char *, unsigned int);
+void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages,
+			enum wb_reason reason);
+void bdi_start_background_writeback(struct backing_dev_info *bdi);
+int bdi_writeback_thread(void *data);
+int bdi_has_dirty_io(struct backing_dev_info *bdi);
+void bdi_arm_supers_timer(void);
+void bdi_wakeup_thread_delayed(struct backing_dev_info *bdi);
+void bdi_lock_two(struct bdi_writeback *wb1, struct bdi_writeback *wb2);
+
+extern spinlock_t bdi_lock;
+extern struct list_head bdi_list;
+extern struct list_head bdi_pending_list;
+
+static inline int wb_has_dirty_io(struct bdi_writeback *wb)
+{
+	return !list_empty(&wb->b_dirty) ||
+	       !list_empty(&wb->b_io) ||
+	       !list_empty(&wb->b_more_io);
+}
+
+static inline void __add_bdi_stat(struct backing_dev_info *bdi,
+		enum bdi_stat_item item, s64 amount)
+{
+	__percpu_counter_add(&bdi->bdi_stat[item], amount, BDI_STAT_BATCH);
+}
+
+static inline void __inc_bdi_stat(struct backing_dev_info *bdi,
+		enum bdi_stat_item item)
+{
+	__add_bdi_stat(bdi, item, 1);
+}
+
+static inline void inc_bdi_stat(struct backing_dev_info *bdi,
+		enum bdi_stat_item item)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	__inc_bdi_stat(bdi, item);
+	local_irq_restore(flags);
+}
+
+static inline void __dec_bdi_stat(struct backing_dev_info *bdi,
+		enum bdi_stat_item item)
+{
+	__add_bdi_stat(bdi, item, -1);
+}
+
+static inline void dec_bdi_stat(struct backing_dev_info *bdi,
+		enum bdi_stat_item item)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	__dec_bdi_stat(bdi, item);
+	local_irq_restore(flags);
+}
+
+static inline s64 bdi_stat(struct backing_dev_info *bdi,
+		enum bdi_stat_item item)
+{
+	return percpu_counter_read_positive(&bdi->bdi_stat[item]);
+}
+
+static inline s64 __bdi_stat_sum(struct backing_dev_info *bdi,
+		enum bdi_stat_item item)
+{
+	return percpu_counter_sum_positive(&bdi->bdi_stat[item]);
+}
+
+static inline s64 bdi_stat_sum(struct backing_dev_info *bdi,
+		enum bdi_stat_item item)
+{
+	s64 sum;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	sum = __bdi_stat_sum(bdi, item);
+	local_irq_restore(flags);
+
+	return sum;
+}
+
+extern void bdi_writeout_inc(struct backing_dev_info *bdi);
+
+/*
+ * maximal error of a stat counter.
+ */
+static inline unsigned long bdi_stat_error(struct backing_dev_info *bdi)
+{
+#ifdef CONFIG_SMP
+	return nr_cpu_ids * BDI_STAT_BATCH;
+#else
+	return 1;
+#endif
+}
+
+int bdi_set_min_ratio(struct backing_dev_info *bdi, unsigned int min_ratio);
+int bdi_set_max_ratio(struct backing_dev_info *bdi, unsigned int max_ratio);
+
+/*
+ * Flags in backing_dev_info::capability
+ *
+ * The first three flags control whether dirty pages will contribute to the
+ * VM's accounting and whether writepages() should be called for dirty pages
+ * (something that would not, for example, be appropriate for ramfs)
+ *
+ * WARNING: these flags are closely related and should not normally be
+ * used separately.  The BDI_CAP_NO_ACCT_AND_WRITEBACK combines these
+ * three flags into a single convenience macro.
+ *
+ * BDI_CAP_NO_ACCT_DIRTY:  Dirty pages shouldn't contribute to accounting
+ * BDI_CAP_NO_WRITEBACK:   Don't write pages back
+ * BDI_CAP_NO_ACCT_WB:     Don't automatically account writeback pages
+ *
+ * These flags let !MMU mmap() govern direct device mapping vs immediate
+ * copying more easily for MAP_PRIVATE, especially for ROM filesystems.
+ *
+ * BDI_CAP_MAP_COPY:       Copy can be mapped (MAP_PRIVATE)
+ * BDI_CAP_MAP_DIRECT:     Can be mapped directly (MAP_SHARED)
+ * BDI_CAP_READ_MAP:       Can be mapped for reading
+ * BDI_CAP_WRITE_MAP:      Can be mapped for writing
+ * BDI_CAP_EXEC_MAP:       Can be mapped for execution
+ *
+ * BDI_CAP_SWAP_BACKED:    Count shmem/tmpfs objects as swap-backed.
+ */
+#define BDI_CAP_NO_ACCT_DIRTY	0x00000001
+#define BDI_CAP_NO_WRITEBACK	0x00000002
+#define BDI_CAP_MAP_COPY	0x00000004
+#define BDI_CAP_MAP_DIRECT	0x00000008
+#define BDI_CAP_READ_MAP	0x00000010
+#define BDI_CAP_WRITE_MAP	0x00000020
+#define BDI_CAP_EXEC_MAP	0x00000040
+#define BDI_CAP_NO_ACCT_WB	0x00000080
+#define BDI_CAP_SWAP_BACKED	0x00000100
+
+#define BDI_CAP_VMFLAGS \
+	(BDI_CAP_READ_MAP | BDI_CAP_WRITE_MAP | BDI_CAP_EXEC_MAP)
+
+#define BDI_CAP_NO_ACCT_AND_WRITEBACK \
+	(BDI_CAP_NO_WRITEBACK | BDI_CAP_NO_ACCT_DIRTY | BDI_CAP_NO_ACCT_WB)
+
+#if defined(VM_MAYREAD) && \
+	(BDI_CAP_READ_MAP != VM_MAYREAD || \
+	 BDI_CAP_WRITE_MAP != VM_MAYWRITE || \
+	 BDI_CAP_EXEC_MAP != VM_MAYEXEC)
+#error please change backing_dev_info::capabilities flags
+#endif
+
+extern struct backing_dev_info default_backing_dev_info;
+extern struct backing_dev_info noop_backing_dev_info;
+
+int writeback_in_progress(struct backing_dev_info *bdi);
+
+static inline int bdi_congested(struct backing_dev_info *bdi, int bdi_bits)
+{
+	if (bdi->congested_fn)
+		return bdi->congested_fn(bdi->congested_data, bdi_bits);
+	return (bdi->state & bdi_bits);
+}
+
+static inline int bdi_read_congested(struct backing_dev_info *bdi)
+{
+	return bdi_congested(bdi, 1 << BDI_sync_congested);
+}
+
+static inline int bdi_write_congested(struct backing_dev_info *bdi)
+{
+	return bdi_congested(bdi, 1 << BDI_async_congested);
+}
+
+static inline int bdi_rw_congested(struct backing_dev_info *bdi)
+{
+	return bdi_congested(bdi, (1 << BDI_sync_congested) |
+				  (1 << BDI_async_congested));
+}
+
+enum {
+	BLK_RW_ASYNC	= 0,
+	BLK_RW_SYNC	= 1,
+};
+
+void clear_bdi_congested(struct backing_dev_info *bdi, int sync);
+void set_bdi_congested(struct backing_dev_info *bdi, int sync);
+long congestion_wait(int sync, long timeout);
+long wait_iff_congested(struct zone *zone, int sync, long timeout);
+
+static inline bool bdi_cap_writeback_dirty(struct backing_dev_info *bdi)
+{
+	return !(bdi->capabilities & BDI_CAP_NO_WRITEBACK);
+}
+
+static inline bool bdi_cap_account_dirty(struct backing_dev_info *bdi)
+{
+	return !(bdi->capabilities & BDI_CAP_NO_ACCT_DIRTY);
+}
+
+static inline bool bdi_cap_account_writeback(struct backing_dev_info *bdi)
+{
+	/* Paranoia: BDI_CAP_NO_WRITEBACK implies BDI_CAP_NO_ACCT_WB */
+	return !(bdi->capabilities & (BDI_CAP_NO_ACCT_WB |
+				      BDI_CAP_NO_WRITEBACK));
+}
+
+static inline bool bdi_cap_swap_backed(struct backing_dev_info *bdi)
+{
+	return bdi->capabilities & BDI_CAP_SWAP_BACKED;
+}
+
+static inline bool bdi_cap_flush_forker(struct backing_dev_info *bdi)
+{
+	return bdi == &default_backing_dev_info;
+}
+
+static inline bool mapping_cap_writeback_dirty(struct address_space *mapping)
+{
+	return bdi_cap_writeback_dirty(mapping->backing_dev_info);
+}
+
+static inline bool mapping_cap_account_dirty(struct address_space *mapping)
+{
+	return bdi_cap_account_dirty(mapping->backing_dev_info);
+}
+
+static inline bool mapping_cap_swap_backed(struct address_space *mapping)
+{
+	return bdi_cap_swap_backed(mapping->backing_dev_info);
+}
+
+static inline int bdi_sched_wait(void *word)
+{
+	schedule();
+	return 0;
+}
+
+#endif		/* _LINUX_BACKING_DEV_H */
diff --git a/include/linux/backlight.h b/include/linux/backlight.h
new file mode 100644
index 00000000..5ffc6dda
--- /dev/null
+++ b/include/linux/backlight.h
@@ -0,0 +1,137 @@
+/*
+ * Backlight Lowlevel Control Abstraction
+ *
+ * Copyright (C) 2003,2004 Hewlett-Packard Company
+ *
+ */
+
+#ifndef _LINUX_BACKLIGHT_H
+#define _LINUX_BACKLIGHT_H
+
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/notifier.h>
+
+/* Notes on locking:
+ *
+ * backlight_device->ops_lock is an internal backlight lock protecting the
+ * ops pointer and no code outside the core should need to touch it.
+ *
+ * Access to update_status() is serialised by the update_lock mutex since
+ * most drivers seem to need this and historically get it wrong.
+ *
+ * Most drivers don't need locking on their get_brightness() method.
+ * If yours does, you need to implement it in the driver. You can use the
+ * update_lock mutex if appropriate.
+ *
+ * Any other use of the locks below is probably wrong.
+ */
+
+enum backlight_update_reason {
+	BACKLIGHT_UPDATE_HOTKEY,
+	BACKLIGHT_UPDATE_SYSFS,
+};
+
+enum backlight_type {
+	BACKLIGHT_RAW = 1,
+	BACKLIGHT_PLATFORM,
+	BACKLIGHT_FIRMWARE,
+	BACKLIGHT_TYPE_MAX,
+};
+
+struct backlight_device;
+struct fb_info;
+
+struct backlight_ops {
+	unsigned int options;
+
+#define BL_CORE_SUSPENDRESUME	(1 << 0)
+
+	/* Notify the backlight driver some property has changed */
+	int (*update_status)(struct backlight_device *);
+	/* Return the current backlight brightness (accounting for power,
+	   fb_blank etc.) */
+	int (*get_brightness)(struct backlight_device *);
+	/* Check if given framebuffer device is the one bound to this backlight;
+	   return 0 if not, !=0 if it is. If NULL, backlight always matches the fb. */
+	int (*check_fb)(struct backlight_device *, struct fb_info *);
+};
+
+/* This structure defines all the properties of a backlight */
+struct backlight_properties {
+	/* Current User requested brightness (0 - max_brightness) */
+	int brightness;
+	/* Maximal value for brightness (read-only) */
+	int max_brightness;
+	/* Current FB Power mode (0: full on, 1..3: power saving
+	   modes; 4: full off), see FB_BLANK_XXX */
+	int power;
+	/* FB Blanking active? (values as for power) */
+	/* Due to be removed, please use (state & BL_CORE_FBBLANK) */
+	int fb_blank;
+	/* Backlight type */
+	enum backlight_type type;
+	/* Flags used to signal drivers of state changes */
+	/* Upper 4 bits are reserved for driver internal use */
+	unsigned int state;
+
+#define BL_CORE_SUSPENDED	(1 << 0)	/* backlight is suspended */
+#define BL_CORE_FBBLANK		(1 << 1)	/* backlight is under an fb blank event */
+#define BL_CORE_DRIVER4		(1 << 28)	/* reserved for driver specific use */
+#define BL_CORE_DRIVER3		(1 << 29)	/* reserved for driver specific use */
+#define BL_CORE_DRIVER2		(1 << 30)	/* reserved for driver specific use */
+#define BL_CORE_DRIVER1		(1 << 31)	/* reserved for driver specific use */
+
+};
+
+struct backlight_device {
+	/* Backlight properties */
+	struct backlight_properties props;
+
+	/* Serialise access to update_status method */
+	struct mutex update_lock;
+
+	/* This protects the 'ops' field. If 'ops' is NULL, the driver that
+	   registered this device has been unloaded, and if class_get_devdata()
+	   points to something in the body of that driver, it is also invalid. */
+	struct mutex ops_lock;
+	const struct backlight_ops *ops;
+
+	/* The framebuffer notifier block */
+	struct notifier_block fb_notif;
+
+	struct device dev;
+};
+
+static inline void backlight_update_status(struct backlight_device *bd)
+{
+	mutex_lock(&bd->update_lock);
+	if (bd->ops && bd->ops->update_status)
+		bd->ops->update_status(bd);
+	mutex_unlock(&bd->update_lock);
+}
+
+extern struct backlight_device *backlight_device_register(const char *name,
+	struct device *dev, void *devdata, const struct backlight_ops *ops,
+	const struct backlight_properties *props);
+extern void backlight_device_unregister(struct backlight_device *bd);
+extern void backlight_force_update(struct backlight_device *bd,
+				   enum backlight_update_reason reason);
+
+#define to_backlight_device(obj) container_of(obj, struct backlight_device, dev)
+
+static inline void * bl_get_data(struct backlight_device *bl_dev)
+{
+	return dev_get_drvdata(&bl_dev->dev);
+}
+
+struct generic_bl_info {
+	const char *name;
+	int max_intensity;
+	int default_intensity;
+	int limit_mask;
+	void (*set_bl_intensity)(int intensity);
+	void (*kick_battery)(void);
+};
+
+#endif
diff --git a/include/linux/basic_mmio_gpio.h b/include/linux/basic_mmio_gpio.h
new file mode 100644
index 00000000..feb91219
--- /dev/null
+++ b/include/linux/basic_mmio_gpio.h
@@ -0,0 +1,72 @@
+/*
+ * Basic memory-mapped GPIO controllers.
+ *
+ * Copyright 2008 MontaVista Software, Inc.
+ * Copyright 2008,2010 Anton Vorontsov <cbouatmailru@gmail.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __BASIC_MMIO_GPIO_H
+#define __BASIC_MMIO_GPIO_H
+
+#include <linux/gpio.h>
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/spinlock_types.h>
+
+struct bgpio_pdata {
+	int base;
+	int ngpio;
+};
+
+struct device;
+
+struct bgpio_chip {
+	struct gpio_chip gc;
+
+	unsigned long (*read_reg)(void __iomem *reg);
+	void (*write_reg)(void __iomem *reg, unsigned long data);
+
+	void __iomem *reg_dat;
+	void __iomem *reg_set;
+	void __iomem *reg_clr;
+	void __iomem *reg_dir;
+
+	/* Number of bits (GPIOs): <register width> * 8. */
+	int bits;
+
+	/*
+	 * Some GPIO controllers work with the big-endian bits notation,
+	 * e.g. in a 8-bits register, GPIO7 is the least significant bit.
+	 */
+	unsigned long (*pin2mask)(struct bgpio_chip *bgc, unsigned int pin);
+
+	/*
+	 * Used to lock bgpio_chip->data. Also, this is needed to keep
+	 * shadowed and real data registers writes together.
+	 */
+	spinlock_t lock;
+
+	/* Shadowed data register to clear/set bits safely. */
+	unsigned long data;
+
+	/* Shadowed direction registers to clear/set direction safely. */
+	unsigned long dir;
+};
+
+static inline struct bgpio_chip *to_bgpio_chip(struct gpio_chip *gc)
+{
+	return container_of(gc, struct bgpio_chip, gc);
+}
+
+int bgpio_remove(struct bgpio_chip *bgc);
+int bgpio_init(struct bgpio_chip *bgc, struct device *dev,
+	       unsigned long sz, void __iomem *dat, void __iomem *set,
+	       void __iomem *clr, void __iomem *dirout, void __iomem *dirin,
+	       bool big_endian);
+
+#endif /* __BASIC_MMIO_GPIO_H */
diff --git a/include/linux/baycom.h b/include/linux/baycom.h
new file mode 100644
index 00000000..81249e02
--- /dev/null
+++ b/include/linux/baycom.h
@@ -0,0 +1,39 @@
+/*
+ * The Linux BAYCOM driver for the Baycom serial 1200 baud modem
+ * and the parallel 9600 baud modem
+ * (C) 1997-1998 by Thomas Sailer, HB9JNX/AE4WA
+ */
+
+#ifndef _BAYCOM_H
+#define _BAYCOM_H
+
+/* -------------------------------------------------------------------- */
+/*
+ * structs for the IOCTL commands
+ */
+
+struct baycom_debug_data {
+	unsigned long debug1;
+	unsigned long debug2;
+	long debug3;
+};
+
+struct baycom_ioctl {
+	int cmd;
+	union {
+		struct baycom_debug_data dbg;
+	} data;
+};
+
+/* -------------------------------------------------------------------- */
+
+/*
+ * ioctl values change for baycom
+ */
+#define BAYCOMCTL_GETDEBUG       0x92
+
+/* -------------------------------------------------------------------- */
+
+#endif /* _BAYCOM_H */
+
+/* --------------------------------------------------------------------- */
diff --git a/include/linux/bcd.h b/include/linux/bcd.h
new file mode 100644
index 00000000..22ea563b
--- /dev/null
+++ b/include/linux/bcd.h
@@ -0,0 +1,9 @@
+#ifndef _BCD_H
+#define _BCD_H
+
+#include <linux/compiler.h>
+
+unsigned bcd2bin(unsigned char val) __attribute_const__;
+unsigned char bin2bcd(unsigned val) __attribute_const__;
+
+#endif /* _BCD_H */
diff --git a/include/linux/bch.h b/include/linux/bch.h
new file mode 100644
index 00000000..295b4ef1
--- /dev/null
+++ b/include/linux/bch.h
@@ -0,0 +1,79 @@
+/*
+ * Generic binary BCH encoding/decoding library
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 51
+ * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Copyright © 2011 Parrot S.A.
+ *
+ * Author: Ivan Djelic <ivan.djelic@parrot.com>
+ *
+ * Description:
+ *
+ * This library provides runtime configurable encoding/decoding of binary
+ * Bose-Chaudhuri-Hocquenghem (BCH) codes.
+*/
+#ifndef _BCH_H
+#define _BCH_H
+
+#include <linux/types.h>
+
+/**
+ * struct bch_control - BCH control structure
+ * @m:          Galois field order
+ * @n:          maximum codeword size in bits (= 2^m-1)
+ * @t:          error correction capability in bits
+ * @ecc_bits:   ecc exact size in bits, i.e. generator polynomial degree (<=m*t)
+ * @ecc_bytes:  ecc max size (m*t bits) in bytes
+ * @a_pow_tab:  Galois field GF(2^m) exponentiation lookup table
+ * @a_log_tab:  Galois field GF(2^m) log lookup table
+ * @mod8_tab:   remainder generator polynomial lookup tables
+ * @ecc_buf:    ecc parity words buffer
+ * @ecc_buf2:   ecc parity words buffer
+ * @xi_tab:     GF(2^m) base for solving degree 2 polynomial roots
+ * @syn:        syndrome buffer
+ * @cache:      log-based polynomial representation buffer
+ * @elp:        error locator polynomial
+ * @poly_2t:    temporary polynomials of degree 2t
+ */
+struct bch_control {
+	unsigned int    m;
+	unsigned int    n;
+	unsigned int    t;
+	unsigned int    ecc_bits;
+	unsigned int    ecc_bytes;
+/* private: */
+	uint16_t       *a_pow_tab;
+	uint16_t       *a_log_tab;
+	uint32_t       *mod8_tab;
+	uint32_t       *ecc_buf;
+	uint32_t       *ecc_buf2;
+	unsigned int   *xi_tab;
+	unsigned int   *syn;
+	int            *cache;
+	struct gf_poly *elp;
+	struct gf_poly *poly_2t[4];
+};
+
+struct bch_control *init_bch(int m, int t, unsigned int prim_poly);
+
+void free_bch(struct bch_control *bch);
+
+void encode_bch(struct bch_control *bch, const uint8_t *data,
+		unsigned int len, uint8_t *ecc);
+
+int decode_bch(struct bch_control *bch, const uint8_t *data, unsigned int len,
+	       const uint8_t *recv_ecc, const uint8_t *calc_ecc,
+	       const unsigned int *syn, unsigned int *errloc);
+
+#endif /* _BCH_H */
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
new file mode 100644
index 00000000..5af9a075
--- /dev/null
+++ b/include/linux/bcma/bcma.h
@@ -0,0 +1,307 @@
+#ifndef LINUX_BCMA_H_
+#define LINUX_BCMA_H_
+
+#include <linux/pci.h>
+#include <linux/mod_devicetable.h>
+
+#include <linux/bcma/bcma_driver_chipcommon.h>
+#include <linux/bcma/bcma_driver_pci.h>
+#include <linux/bcma/bcma_driver_mips.h>
+#include <linux/ssb/ssb.h> /* SPROM sharing */
+
+#include "bcma_regs.h"
+
+struct bcma_device;
+struct bcma_bus;
+
+enum bcma_hosttype {
+	BCMA_HOSTTYPE_PCI,
+	BCMA_HOSTTYPE_SDIO,
+	BCMA_HOSTTYPE_SOC,
+};
+
+struct bcma_chipinfo {
+	u16 id;
+	u8 rev;
+	u8 pkg;
+};
+
+enum bcma_clkmode {
+	BCMA_CLKMODE_FAST,
+	BCMA_CLKMODE_DYNAMIC,
+};
+
+struct bcma_host_ops {
+	u8 (*read8)(struct bcma_device *core, u16 offset);
+	u16 (*read16)(struct bcma_device *core, u16 offset);
+	u32 (*read32)(struct bcma_device *core, u16 offset);
+	void (*write8)(struct bcma_device *core, u16 offset, u8 value);
+	void (*write16)(struct bcma_device *core, u16 offset, u16 value);
+	void (*write32)(struct bcma_device *core, u16 offset, u32 value);
+#ifdef CONFIG_BCMA_BLOCKIO
+	void (*block_read)(struct bcma_device *core, void *buffer,
+			   size_t count, u16 offset, u8 reg_width);
+	void (*block_write)(struct bcma_device *core, const void *buffer,
+			    size_t count, u16 offset, u8 reg_width);
+#endif
+	/* Agent ops */
+	u32 (*aread32)(struct bcma_device *core, u16 offset);
+	void (*awrite32)(struct bcma_device *core, u16 offset, u32 value);
+};
+
+/* Core manufacturers */
+#define BCMA_MANUF_ARM			0x43B
+#define BCMA_MANUF_MIPS			0x4A7
+#define BCMA_MANUF_BCM			0x4BF
+
+/* Core class values. */
+#define BCMA_CL_SIM			0x0
+#define BCMA_CL_EROM			0x1
+#define BCMA_CL_CORESIGHT		0x9
+#define BCMA_CL_VERIF			0xB
+#define BCMA_CL_OPTIMO			0xD
+#define BCMA_CL_GEN			0xE
+#define BCMA_CL_PRIMECELL		0xF
+
+/* Core-ID values. */
+#define BCMA_CORE_OOB_ROUTER		0x367	/* Out of band */
+#define BCMA_CORE_INVALID		0x700
+#define BCMA_CORE_CHIPCOMMON		0x800
+#define BCMA_CORE_ILINE20		0x801
+#define BCMA_CORE_SRAM			0x802
+#define BCMA_CORE_SDRAM			0x803
+#define BCMA_CORE_PCI			0x804
+#define BCMA_CORE_MIPS			0x805
+#define BCMA_CORE_ETHERNET		0x806
+#define BCMA_CORE_V90			0x807
+#define BCMA_CORE_USB11_HOSTDEV		0x808
+#define BCMA_CORE_ADSL			0x809
+#define BCMA_CORE_ILINE100		0x80A
+#define BCMA_CORE_IPSEC			0x80B
+#define BCMA_CORE_UTOPIA		0x80C
+#define BCMA_CORE_PCMCIA		0x80D
+#define BCMA_CORE_INTERNAL_MEM		0x80E
+#define BCMA_CORE_MEMC_SDRAM		0x80F
+#define BCMA_CORE_OFDM			0x810
+#define BCMA_CORE_EXTIF			0x811
+#define BCMA_CORE_80211			0x812
+#define BCMA_CORE_PHY_A			0x813
+#define BCMA_CORE_PHY_B			0x814
+#define BCMA_CORE_PHY_G			0x815
+#define BCMA_CORE_MIPS_3302		0x816
+#define BCMA_CORE_USB11_HOST		0x817
+#define BCMA_CORE_USB11_DEV		0x818
+#define BCMA_CORE_USB20_HOST		0x819
+#define BCMA_CORE_USB20_DEV		0x81A
+#define BCMA_CORE_SDIO_HOST		0x81B
+#define BCMA_CORE_ROBOSWITCH		0x81C
+#define BCMA_CORE_PARA_ATA		0x81D
+#define BCMA_CORE_SATA_XORDMA		0x81E
+#define BCMA_CORE_ETHERNET_GBIT		0x81F
+#define BCMA_CORE_PCIE			0x820
+#define BCMA_CORE_PHY_N			0x821
+#define BCMA_CORE_SRAM_CTL		0x822
+#define BCMA_CORE_MINI_MACPHY		0x823
+#define BCMA_CORE_ARM_1176		0x824
+#define BCMA_CORE_ARM_7TDMI		0x825
+#define BCMA_CORE_PHY_LP		0x826
+#define BCMA_CORE_PMU			0x827
+#define BCMA_CORE_PHY_SSN		0x828
+#define BCMA_CORE_SDIO_DEV		0x829
+#define BCMA_CORE_ARM_CM3		0x82A
+#define BCMA_CORE_PHY_HT		0x82B
+#define BCMA_CORE_MIPS_74K		0x82C
+#define BCMA_CORE_MAC_GBIT		0x82D
+#define BCMA_CORE_DDR12_MEM_CTL		0x82E
+#define BCMA_CORE_PCIE_RC		0x82F	/* PCIe Root Complex */
+#define BCMA_CORE_OCP_OCP_BRIDGE	0x830
+#define BCMA_CORE_SHARED_COMMON		0x831
+#define BCMA_CORE_OCP_AHB_BRIDGE	0x832
+#define BCMA_CORE_SPI_HOST		0x833
+#define BCMA_CORE_I2S			0x834
+#define BCMA_CORE_SDR_DDR1_MEM_CTL	0x835	/* SDR/DDR1 memory controller core */
+#define BCMA_CORE_SHIM			0x837	/* SHIM component in ubus/6362 */
+#define BCMA_CORE_DEFAULT		0xFFF
+
+#define BCMA_MAX_NR_CORES		16
+
+struct bcma_device {
+	struct bcma_bus *bus;
+	struct bcma_device_id id;
+
+	struct device dev;
+	struct device *dma_dev;
+
+	unsigned int irq;
+	bool dev_registered;
+
+	u8 core_index;
+	u8 core_unit;
+
+	u32 addr;
+	u32 wrap;
+
+	void __iomem *io_addr;
+	void __iomem *io_wrap;
+
+	void *drvdata;
+	struct list_head list;
+};
+
+static inline void *bcma_get_drvdata(struct bcma_device *core)
+{
+	return core->drvdata;
+}
+static inline void bcma_set_drvdata(struct bcma_device *core, void *drvdata)
+{
+	core->drvdata = drvdata;
+}
+
+struct bcma_driver {
+	const char *name;
+	const struct bcma_device_id *id_table;
+
+	int (*probe)(struct bcma_device *dev);
+	void (*remove)(struct bcma_device *dev);
+	int (*suspend)(struct bcma_device *dev);
+	int (*resume)(struct bcma_device *dev);
+	void (*shutdown)(struct bcma_device *dev);
+
+	struct device_driver drv;
+};
+extern
+int __bcma_driver_register(struct bcma_driver *drv, struct module *owner);
+#define bcma_driver_register(drv) \
+	__bcma_driver_register(drv, THIS_MODULE)
+
+extern void bcma_driver_unregister(struct bcma_driver *drv);
+
+/* Set a fallback SPROM.
+ * See kdoc at the function definition for complete documentation. */
+extern int bcma_arch_register_fallback_sprom(
+		int (*sprom_callback)(struct bcma_bus *bus,
+		struct ssb_sprom *out));
+
+struct bcma_bus {
+	/* The MMIO area. */
+	void __iomem *mmio;
+
+	const struct bcma_host_ops *ops;
+
+	enum bcma_hosttype hosttype;
+	union {
+		/* Pointer to the PCI bus (only for BCMA_HOSTTYPE_PCI) */
+		struct pci_dev *host_pci;
+		/* Pointer to the SDIO device (only for BCMA_HOSTTYPE_SDIO) */
+		struct sdio_func *host_sdio;
+	};
+
+	struct bcma_chipinfo chipinfo;
+
+	struct bcma_device *mapped_core;
+	struct list_head cores;
+	u8 nr_cores;
+	u8 init_done:1;
+	u8 num;
+
+	struct bcma_drv_cc drv_cc;
+	struct bcma_drv_pci drv_pci;
+	struct bcma_drv_mips drv_mips;
+
+	/* We decided to share SPROM struct with SSB as long as we do not need
+	 * any hacks for BCMA. This simplifies drivers code. */
+	struct ssb_sprom sprom;
+};
+
+static inline u32 bcma_read8(struct bcma_device *core, u16 offset)
+{
+	return core->bus->ops->read8(core, offset);
+}
+static inline u32 bcma_read16(struct bcma_device *core, u16 offset)
+{
+	return core->bus->ops->read16(core, offset);
+}
+static inline u32 bcma_read32(struct bcma_device *core, u16 offset)
+{
+	return core->bus->ops->read32(core, offset);
+}
+static inline
+void bcma_write8(struct bcma_device *core, u16 offset, u32 value)
+{
+	core->bus->ops->write8(core, offset, value);
+}
+static inline
+void bcma_write16(struct bcma_device *core, u16 offset, u32 value)
+{
+	core->bus->ops->write16(core, offset, value);
+}
+static inline
+void bcma_write32(struct bcma_device *core, u16 offset, u32 value)
+{
+	core->bus->ops->write32(core, offset, value);
+}
+#ifdef CONFIG_BCMA_BLOCKIO
+static inline void bcma_block_read(struct bcma_device *core, void *buffer,
+				   size_t count, u16 offset, u8 reg_width)
+{
+	core->bus->ops->block_read(core, buffer, count, offset, reg_width);
+}
+static inline void bcma_block_write(struct bcma_device *core,
+				    const void *buffer, size_t count,
+				    u16 offset, u8 reg_width)
+{
+	core->bus->ops->block_write(core, buffer, count, offset, reg_width);
+}
+#endif
+static inline u32 bcma_aread32(struct bcma_device *core, u16 offset)
+{
+	return core->bus->ops->aread32(core, offset);
+}
+static inline
+void bcma_awrite32(struct bcma_device *core, u16 offset, u32 value)
+{
+	core->bus->ops->awrite32(core, offset, value);
+}
+
+static inline void bcma_mask32(struct bcma_device *cc, u16 offset, u32 mask)
+{
+	bcma_write32(cc, offset, bcma_read32(cc, offset) & mask);
+}
+static inline void bcma_set32(struct bcma_device *cc, u16 offset, u32 set)
+{
+	bcma_write32(cc, offset, bcma_read32(cc, offset) | set);
+}
+static inline void bcma_maskset32(struct bcma_device *cc,
+				  u16 offset, u32 mask, u32 set)
+{
+	bcma_write32(cc, offset, (bcma_read32(cc, offset) & mask) | set);
+}
+static inline void bcma_mask16(struct bcma_device *cc, u16 offset, u16 mask)
+{
+	bcma_write16(cc, offset, bcma_read16(cc, offset) & mask);
+}
+static inline void bcma_set16(struct bcma_device *cc, u16 offset, u16 set)
+{
+	bcma_write16(cc, offset, bcma_read16(cc, offset) | set);
+}
+static inline void bcma_maskset16(struct bcma_device *cc,
+				  u16 offset, u16 mask, u16 set)
+{
+	bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set);
+}
+
+extern struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid);
+extern bool bcma_core_is_enabled(struct bcma_device *core);
+extern void bcma_core_disable(struct bcma_device *core, u32 flags);
+extern int bcma_core_enable(struct bcma_device *core, u32 flags);
+extern void bcma_core_set_clockmode(struct bcma_device *core,
+				    enum bcma_clkmode clkmode);
+extern void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status,
+			      bool on);
+#define BCMA_DMA_TRANSLATION_MASK	0xC0000000
+#define  BCMA_DMA_TRANSLATION_NONE	0x00000000
+#define  BCMA_DMA_TRANSLATION_DMA32_CMT	0x40000000 /* Client Mode Translation for 32-bit DMA */
+#define  BCMA_DMA_TRANSLATION_DMA64_CMT	0x80000000 /* Client Mode Translation for 64-bit DMA */
+extern u32 bcma_core_dma_translation(struct bcma_device *core);
+
+#endif /* LINUX_BCMA_H_ */
diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h
new file mode 100644
index 00000000..8bbfe31f
--- /dev/null
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -0,0 +1,415 @@
+#ifndef LINUX_BCMA_DRIVER_CC_H_
+#define LINUX_BCMA_DRIVER_CC_H_
+
+/** ChipCommon core registers. **/
+#define BCMA_CC_ID			0x0000
+#define  BCMA_CC_ID_ID			0x0000FFFF
+#define  BCMA_CC_ID_ID_SHIFT		0
+#define  BCMA_CC_ID_REV			0x000F0000
+#define  BCMA_CC_ID_REV_SHIFT		16
+#define  BCMA_CC_ID_PKG			0x00F00000
+#define  BCMA_CC_ID_PKG_SHIFT		20
+#define  BCMA_CC_ID_NRCORES		0x0F000000
+#define  BCMA_CC_ID_NRCORES_SHIFT	24
+#define  BCMA_CC_ID_TYPE		0xF0000000
+#define  BCMA_CC_ID_TYPE_SHIFT		28
+#define BCMA_CC_CAP			0x0004		/* Capabilities */
+#define  BCMA_CC_CAP_NRUART		0x00000003	/* # of UARTs */
+#define  BCMA_CC_CAP_MIPSEB		0x00000004	/* MIPS in BigEndian Mode */
+#define  BCMA_CC_CAP_UARTCLK		0x00000018	/* UART clock select */
+#define   BCMA_CC_CAP_UARTCLK_INT	0x00000008	/* UARTs are driven by internal divided clock */
+#define  BCMA_CC_CAP_UARTGPIO		0x00000020	/* UARTs on GPIO 15-12 */
+#define  BCMA_CC_CAP_EXTBUS		0x000000C0	/* External buses present */
+#define  BCMA_CC_CAP_FLASHT		0x00000700	/* Flash Type */
+#define   BCMA_CC_FLASHT_NONE		0x00000000	/* No flash */
+#define   BCMA_CC_FLASHT_STSER		0x00000100	/* ST serial flash */
+#define   BCMA_CC_FLASHT_ATSER		0x00000200	/* Atmel serial flash */
+#define   BCMA_CC_FLASHT_NFLASH		0x00000200
+#define	  BCMA_CC_FLASHT_PARA		0x00000700	/* Parallel flash */
+#define  BCMA_CC_CAP_PLLT		0x00038000	/* PLL Type */
+#define   BCMA_PLLTYPE_NONE		0x00000000
+#define   BCMA_PLLTYPE_1		0x00010000	/* 48Mhz base, 3 dividers */
+#define   BCMA_PLLTYPE_2		0x00020000	/* 48Mhz, 4 dividers */
+#define   BCMA_PLLTYPE_3		0x00030000	/* 25Mhz, 2 dividers */
+#define   BCMA_PLLTYPE_4		0x00008000	/* 48Mhz, 4 dividers */
+#define   BCMA_PLLTYPE_5		0x00018000	/* 25Mhz, 4 dividers */
+#define   BCMA_PLLTYPE_6		0x00028000	/* 100/200 or 120/240 only */
+#define   BCMA_PLLTYPE_7		0x00038000	/* 25Mhz, 4 dividers */
+#define  BCMA_CC_CAP_PCTL		0x00040000	/* Power Control */
+#define  BCMA_CC_CAP_OTPS		0x00380000	/* OTP size */
+#define  BCMA_CC_CAP_OTPS_SHIFT		19
+#define  BCMA_CC_CAP_OTPS_BASE		5
+#define  BCMA_CC_CAP_JTAGM		0x00400000	/* JTAG master present */
+#define  BCMA_CC_CAP_BROM		0x00800000	/* Internal boot ROM active */
+#define  BCMA_CC_CAP_64BIT		0x08000000	/* 64-bit Backplane */
+#define  BCMA_CC_CAP_PMU		0x10000000	/* PMU available (rev >= 20) */
+#define  BCMA_CC_CAP_ECI		0x20000000	/* ECI available (rev >= 20) */
+#define  BCMA_CC_CAP_SPROM		0x40000000	/* SPROM present */
+#define BCMA_CC_CORECTL			0x0008
+#define  BCMA_CC_CORECTL_UARTCLK0	0x00000001	/* Drive UART with internal clock */
+#define	 BCMA_CC_CORECTL_SE		0x00000002	/* sync clk out enable (corerev >= 3) */
+#define  BCMA_CC_CORECTL_UARTCLKEN	0x00000008	/* UART clock enable (rev >= 21) */
+#define BCMA_CC_BIST			0x000C
+#define BCMA_CC_OTPS			0x0010		/* OTP status */
+#define	 BCMA_CC_OTPS_PROGFAIL		0x80000000
+#define	 BCMA_CC_OTPS_PROTECT		0x00000007
+#define	 BCMA_CC_OTPS_HW_PROTECT	0x00000001
+#define	 BCMA_CC_OTPS_SW_PROTECT	0x00000002
+#define	 BCMA_CC_OTPS_CID_PROTECT	0x00000004
+#define  BCMA_CC_OTPS_GU_PROG_IND	0x00000F00	/* General Use programmed indication */
+#define  BCMA_CC_OTPS_GU_PROG_IND_SHIFT	8
+#define  BCMA_CC_OTPS_GU_PROG_HW	0x00000100	/* HW region programmed */
+#define BCMA_CC_OTPC			0x0014		/* OTP control */
+#define	 BCMA_CC_OTPC_RECWAIT		0xFF000000
+#define	 BCMA_CC_OTPC_PROGWAIT		0x00FFFF00
+#define	 BCMA_CC_OTPC_PRW_SHIFT		8
+#define	 BCMA_CC_OTPC_MAXFAIL		0x00000038
+#define	 BCMA_CC_OTPC_VSEL		0x00000006
+#define	 BCMA_CC_OTPC_SELVL		0x00000001
+#define BCMA_CC_OTPP			0x0018		/* OTP prog */
+#define	 BCMA_CC_OTPP_COL		0x000000FF
+#define	 BCMA_CC_OTPP_ROW		0x0000FF00
+#define	 BCMA_CC_OTPP_ROW_SHIFT		8
+#define	 BCMA_CC_OTPP_READERR		0x10000000
+#define	 BCMA_CC_OTPP_VALUE		0x20000000
+#define	 BCMA_CC_OTPP_READ		0x40000000
+#define	 BCMA_CC_OTPP_START		0x80000000
+#define	 BCMA_CC_OTPP_BUSY		0x80000000
+#define BCMA_CC_OTPL			0x001C		/* OTP layout */
+#define  BCMA_CC_OTPL_GURGN_OFFSET	0x00000FFF	/* offset of general use region */
+#define BCMA_CC_IRQSTAT			0x0020
+#define BCMA_CC_IRQMASK			0x0024
+#define	 BCMA_CC_IRQ_GPIO		0x00000001	/* gpio intr */
+#define	 BCMA_CC_IRQ_EXT		0x00000002	/* ro: ext intr pin (corerev >= 3) */
+#define	 BCMA_CC_IRQ_WDRESET		0x80000000	/* watchdog reset occurred */
+#define BCMA_CC_CHIPCTL			0x0028		/* Rev >= 11 only */
+#define BCMA_CC_CHIPSTAT		0x002C		/* Rev >= 11 only */
+#define  BCMA_CC_CHIPST_4313_SPROM_PRESENT	1
+#define  BCMA_CC_CHIPST_4313_OTP_PRESENT	2
+#define  BCMA_CC_CHIPST_4331_SPROM_PRESENT	2
+#define  BCMA_CC_CHIPST_4331_OTP_PRESENT	4
+#define BCMA_CC_JCMD			0x0030		/* Rev >= 10 only */
+#define  BCMA_CC_JCMD_START		0x80000000
+#define  BCMA_CC_JCMD_BUSY		0x80000000
+#define  BCMA_CC_JCMD_PAUSE		0x40000000
+#define  BCMA_CC_JCMD0_ACC_MASK		0x0000F000
+#define  BCMA_CC_JCMD0_ACC_IRDR		0x00000000
+#define  BCMA_CC_JCMD0_ACC_DR		0x00001000
+#define  BCMA_CC_JCMD0_ACC_IR		0x00002000
+#define  BCMA_CC_JCMD0_ACC_RESET	0x00003000
+#define  BCMA_CC_JCMD0_ACC_IRPDR	0x00004000
+#define  BCMA_CC_JCMD0_ACC_PDR		0x00005000
+#define  BCMA_CC_JCMD0_IRW_MASK		0x00000F00
+#define  BCMA_CC_JCMD_ACC_MASK		0x000F0000	/* Changes for corerev 11 */
+#define  BCMA_CC_JCMD_ACC_IRDR		0x00000000
+#define  BCMA_CC_JCMD_ACC_DR		0x00010000
+#define  BCMA_CC_JCMD_ACC_IR		0x00020000
+#define  BCMA_CC_JCMD_ACC_RESET		0x00030000
+#define  BCMA_CC_JCMD_ACC_IRPDR		0x00040000
+#define  BCMA_CC_JCMD_ACC_PDR		0x00050000
+#define  BCMA_CC_JCMD_IRW_MASK		0x00001F00
+#define  BCMA_CC_JCMD_IRW_SHIFT		8
+#define  BCMA_CC_JCMD_DRW_MASK		0x0000003F
+#define BCMA_CC_JIR			0x0034		/* Rev >= 10 only */
+#define BCMA_CC_JDR			0x0038		/* Rev >= 10 only */
+#define BCMA_CC_JCTL			0x003C		/* Rev >= 10 only */
+#define  BCMA_CC_JCTL_FORCE_CLK		4		/* Force clock */
+#define  BCMA_CC_JCTL_EXT_EN		2		/* Enable external targets */
+#define  BCMA_CC_JCTL_EN		1		/* Enable Jtag master */
+#define BCMA_CC_FLASHCTL		0x0040
+#define  BCMA_CC_FLASHCTL_START		0x80000000
+#define  BCMA_CC_FLASHCTL_BUSY		BCMA_CC_FLASHCTL_START
+#define BCMA_CC_FLASHADDR		0x0044
+#define BCMA_CC_FLASHDATA		0x0048
+#define BCMA_CC_BCAST_ADDR		0x0050
+#define BCMA_CC_BCAST_DATA		0x0054
+#define BCMA_CC_GPIOPULLUP		0x0058		/* Rev >= 20 only */
+#define BCMA_CC_GPIOPULLDOWN		0x005C		/* Rev >= 20 only */
+#define BCMA_CC_GPIOIN			0x0060
+#define BCMA_CC_GPIOOUT			0x0064
+#define BCMA_CC_GPIOOUTEN		0x0068
+#define BCMA_CC_GPIOCTL			0x006C
+#define BCMA_CC_GPIOPOL			0x0070
+#define BCMA_CC_GPIOIRQ			0x0074
+#define BCMA_CC_WATCHDOG		0x0080
+#define BCMA_CC_GPIOTIMER		0x0088		/* LED powersave (corerev >= 16) */
+#define  BCMA_CC_GPIOTIMER_OFFTIME	0x0000FFFF
+#define  BCMA_CC_GPIOTIMER_OFFTIME_SHIFT	0
+#define  BCMA_CC_GPIOTIMER_ONTIME	0xFFFF0000
+#define  BCMA_CC_GPIOTIMER_ONTIME_SHIFT	16
+#define BCMA_CC_GPIOTOUTM		0x008C		/* LED powersave (corerev >= 16) */
+#define BCMA_CC_CLOCK_N			0x0090
+#define BCMA_CC_CLOCK_SB		0x0094
+#define BCMA_CC_CLOCK_PCI		0x0098
+#define BCMA_CC_CLOCK_M2		0x009C
+#define BCMA_CC_CLOCK_MIPS		0x00A0
+#define BCMA_CC_CLKDIV			0x00A4		/* Rev >= 3 only */
+#define	 BCMA_CC_CLKDIV_SFLASH		0x0F000000
+#define	 BCMA_CC_CLKDIV_SFLASH_SHIFT	24
+#define	 BCMA_CC_CLKDIV_OTP		0x000F0000
+#define	 BCMA_CC_CLKDIV_OTP_SHIFT	16
+#define	 BCMA_CC_CLKDIV_JTAG		0x00000F00
+#define	 BCMA_CC_CLKDIV_JTAG_SHIFT	8
+#define	 BCMA_CC_CLKDIV_UART		0x000000FF
+#define BCMA_CC_CAP_EXT			0x00AC		/* Capabilities */
+#define BCMA_CC_PLLONDELAY		0x00B0		/* Rev >= 4 only */
+#define BCMA_CC_FREFSELDELAY		0x00B4		/* Rev >= 4 only */
+#define BCMA_CC_SLOWCLKCTL		0x00B8		/* 6 <= Rev <= 9 only */
+#define  BCMA_CC_SLOWCLKCTL_SRC		0x00000007	/* slow clock source mask */
+#define	  BCMA_CC_SLOWCLKCTL_SRC_LPO	0x00000000	/* source of slow clock is LPO */
+#define   BCMA_CC_SLOWCLKCTL_SRC_XTAL	0x00000001	/* source of slow clock is crystal */
+#define	  BCMA_CC_SLOECLKCTL_SRC_PCI	0x00000002	/* source of slow clock is PCI */
+#define  BCMA_CC_SLOWCLKCTL_LPOFREQ	0x00000200	/* LPOFreqSel, 1: 160Khz, 0: 32KHz */
+#define  BCMA_CC_SLOWCLKCTL_LPOPD	0x00000400	/* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
+#define  BCMA_CC_SLOWCLKCTL_FSLOW	0x00000800	/* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
+#define  BCMA_CC_SLOWCLKCTL_IPLL	0x00001000	/* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */
+#define  BCMA_CC_SLOWCLKCTL_ENXTAL	0x00002000	/* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */
+#define  BCMA_CC_SLOWCLKCTL_XTALPU	0x00004000	/* XtalPU (RO), 1/0: crystal running/disabled */
+#define  BCMA_CC_SLOWCLKCTL_CLKDIV	0xFFFF0000	/* ClockDivider (SlowClk = 1/(4+divisor)) */
+#define  BCMA_CC_SLOWCLKCTL_CLKDIV_SHIFT	16
+#define BCMA_CC_SYSCLKCTL		0x00C0		/* Rev >= 3 only */
+#define	 BCMA_CC_SYSCLKCTL_IDLPEN	0x00000001	/* ILPen: Enable Idle Low Power */
+#define	 BCMA_CC_SYSCLKCTL_ALPEN	0x00000002	/* ALPen: Enable Active Low Power */
+#define	 BCMA_CC_SYSCLKCTL_PLLEN	0x00000004	/* ForcePLLOn */
+#define	 BCMA_CC_SYSCLKCTL_FORCEALP	0x00000008	/* Force ALP (or HT if ALPen is not set */
+#define	 BCMA_CC_SYSCLKCTL_FORCEHT	0x00000010	/* Force HT */
+#define  BCMA_CC_SYSCLKCTL_CLKDIV	0xFFFF0000	/* ClkDiv  (ILP = 1/(4+divisor)) */
+#define  BCMA_CC_SYSCLKCTL_CLKDIV_SHIFT	16
+#define BCMA_CC_CLKSTSTR		0x00C4		/* Rev >= 3 only */
+#define BCMA_CC_EROM			0x00FC
+#define BCMA_CC_PCMCIA_CFG		0x0100
+#define BCMA_CC_PCMCIA_MEMWAIT		0x0104
+#define BCMA_CC_PCMCIA_ATTRWAIT		0x0108
+#define BCMA_CC_PCMCIA_IOWAIT		0x010C
+#define BCMA_CC_IDE_CFG			0x0110
+#define BCMA_CC_IDE_MEMWAIT		0x0114
+#define BCMA_CC_IDE_ATTRWAIT		0x0118
+#define BCMA_CC_IDE_IOWAIT		0x011C
+#define BCMA_CC_PROG_CFG		0x0120
+#define BCMA_CC_PROG_WAITCNT		0x0124
+#define BCMA_CC_FLASH_CFG		0x0128
+#define  BCMA_CC_FLASH_CFG_DS		0x0010	/* Data size, 0=8bit, 1=16bit */
+#define BCMA_CC_FLASH_WAITCNT		0x012C
+#define BCMA_CC_SROM_CONTROL		0x0190
+#define  BCMA_CC_SROM_CONTROL_START	0x80000000
+#define  BCMA_CC_SROM_CONTROL_BUSY	0x80000000
+#define  BCMA_CC_SROM_CONTROL_OPCODE	0x60000000
+#define  BCMA_CC_SROM_CONTROL_OP_READ	0x00000000
+#define  BCMA_CC_SROM_CONTROL_OP_WRITE	0x20000000
+#define  BCMA_CC_SROM_CONTROL_OP_WRDIS	0x40000000
+#define  BCMA_CC_SROM_CONTROL_OP_WREN	0x60000000
+#define  BCMA_CC_SROM_CONTROL_OTPSEL	0x00000010
+#define  BCMA_CC_SROM_CONTROL_LOCK	0x00000008
+#define  BCMA_CC_SROM_CONTROL_SIZE_MASK	0x00000006
+#define  BCMA_CC_SROM_CONTROL_SIZE_1K	0x00000000
+#define  BCMA_CC_SROM_CONTROL_SIZE_4K	0x00000002
+#define  BCMA_CC_SROM_CONTROL_SIZE_16K	0x00000004
+#define  BCMA_CC_SROM_CONTROL_SIZE_SHIFT	1
+#define  BCMA_CC_SROM_CONTROL_PRESENT	0x00000001
+/* 0x1E0 is defined as shared BCMA_CLKCTLST */
+#define BCMA_CC_HW_WORKAROUND		0x01E4 /* Hardware workaround (rev >= 20) */
+#define BCMA_CC_UART0_DATA		0x0300
+#define BCMA_CC_UART0_IMR		0x0304
+#define BCMA_CC_UART0_FCR		0x0308
+#define BCMA_CC_UART0_LCR		0x030C
+#define BCMA_CC_UART0_MCR		0x0310
+#define BCMA_CC_UART0_LSR		0x0314
+#define BCMA_CC_UART0_MSR		0x0318
+#define BCMA_CC_UART0_SCRATCH		0x031C
+#define BCMA_CC_UART1_DATA		0x0400
+#define BCMA_CC_UART1_IMR		0x0404
+#define BCMA_CC_UART1_FCR		0x0408
+#define BCMA_CC_UART1_LCR		0x040C
+#define BCMA_CC_UART1_MCR		0x0410
+#define BCMA_CC_UART1_LSR		0x0414
+#define BCMA_CC_UART1_MSR		0x0418
+#define BCMA_CC_UART1_SCRATCH		0x041C
+/* PMU registers (rev >= 20) */
+#define BCMA_CC_PMU_CTL			0x0600 /* PMU control */
+#define  BCMA_CC_PMU_CTL_ILP_DIV	0xFFFF0000 /* ILP div mask */
+#define  BCMA_CC_PMU_CTL_ILP_DIV_SHIFT	16
+#define  BCMA_CC_PMU_CTL_PLL_UPD	0x00000400
+#define  BCMA_CC_PMU_CTL_NOILPONW	0x00000200 /* No ILP on wait */
+#define  BCMA_CC_PMU_CTL_HTREQEN	0x00000100 /* HT req enable */
+#define  BCMA_CC_PMU_CTL_ALPREQEN	0x00000080 /* ALP req enable */
+#define  BCMA_CC_PMU_CTL_XTALFREQ	0x0000007C /* Crystal freq */
+#define  BCMA_CC_PMU_CTL_XTALFREQ_SHIFT	2
+#define  BCMA_CC_PMU_CTL_ILPDIVEN	0x00000002 /* ILP div enable */
+#define  BCMA_CC_PMU_CTL_LPOSEL		0x00000001 /* LPO sel */
+#define BCMA_CC_PMU_CAP			0x0604 /* PMU capabilities */
+#define  BCMA_CC_PMU_CAP_REVISION	0x000000FF /* Revision mask */
+#define BCMA_CC_PMU_STAT		0x0608 /* PMU status */
+#define  BCMA_CC_PMU_STAT_INTPEND	0x00000040 /* Interrupt pending */
+#define  BCMA_CC_PMU_STAT_SBCLKST	0x00000030 /* Backplane clock status? */
+#define  BCMA_CC_PMU_STAT_HAVEALP	0x00000008 /* ALP available */
+#define  BCMA_CC_PMU_STAT_HAVEHT	0x00000004 /* HT available */
+#define  BCMA_CC_PMU_STAT_RESINIT	0x00000003 /* Res init */
+#define BCMA_CC_PMU_RES_STAT		0x060C /* PMU res status */
+#define BCMA_CC_PMU_RES_PEND		0x0610 /* PMU res pending */
+#define BCMA_CC_PMU_TIMER		0x0614 /* PMU timer */
+#define BCMA_CC_PMU_MINRES_MSK		0x0618 /* PMU min res mask */
+#define BCMA_CC_PMU_MAXRES_MSK		0x061C /* PMU max res mask */
+#define BCMA_CC_PMU_RES_TABSEL		0x0620 /* PMU res table sel */
+#define BCMA_CC_PMU_RES_DEPMSK		0x0624 /* PMU res dep mask */
+#define BCMA_CC_PMU_RES_UPDNTM		0x0628 /* PMU res updown timer */
+#define BCMA_CC_PMU_RES_TIMER		0x062C /* PMU res timer */
+#define BCMA_CC_PMU_CLKSTRETCH		0x0630 /* PMU clockstretch */
+#define BCMA_CC_PMU_WATCHDOG		0x0634 /* PMU watchdog */
+#define BCMA_CC_PMU_RES_REQTS		0x0640 /* PMU res req timer sel */
+#define BCMA_CC_PMU_RES_REQT		0x0644 /* PMU res req timer */
+#define BCMA_CC_PMU_RES_REQM		0x0648 /* PMU res req mask */
+#define BCMA_CC_CHIPCTL_ADDR		0x0650
+#define BCMA_CC_CHIPCTL_DATA		0x0654
+#define BCMA_CC_REGCTL_ADDR		0x0658
+#define BCMA_CC_REGCTL_DATA		0x065C
+#define BCMA_CC_PLLCTL_ADDR		0x0660
+#define BCMA_CC_PLLCTL_DATA		0x0664
+#define BCMA_CC_SPROM			0x0800 /* SPROM beginning */
+
+/* Divider allocation in 4716/47162/5356 */
+#define BCMA_CC_PMU5_MAINPLL_CPU	1
+#define BCMA_CC_PMU5_MAINPLL_MEM	2
+#define BCMA_CC_PMU5_MAINPLL_SSB	3
+
+/* PLL usage in 4716/47162 */
+#define BCMA_CC_PMU4716_MAINPLL_PLL0	12
+
+/* PLL usage in 5356/5357 */
+#define BCMA_CC_PMU5356_MAINPLL_PLL0	0
+#define BCMA_CC_PMU5357_MAINPLL_PLL0	0
+
+/* 4706 PMU */
+#define BCMA_CC_PMU4706_MAINPLL_PLL0	0
+
+/* ALP clock on pre-PMU chips */
+#define BCMA_CC_PMU_ALP_CLOCK		20000000
+/* HT clock for systems with PMU-enabled chipcommon */
+#define BCMA_CC_PMU_HT_CLOCK		80000000
+
+/* PMU rev 5 (& 6) */
+#define BCMA_CC_PPL_P1P2_OFF		0
+#define BCMA_CC_PPL_P1_MASK		0x0f000000
+#define BCMA_CC_PPL_P1_SHIFT		24
+#define BCMA_CC_PPL_P2_MASK		0x00f00000
+#define BCMA_CC_PPL_P2_SHIFT		20
+#define BCMA_CC_PPL_M14_OFF		1
+#define BCMA_CC_PPL_MDIV_MASK		0x000000ff
+#define BCMA_CC_PPL_MDIV_WIDTH		8
+#define BCMA_CC_PPL_NM5_OFF		2
+#define BCMA_CC_PPL_NDIV_MASK		0xfff00000
+#define BCMA_CC_PPL_NDIV_SHIFT		20
+#define BCMA_CC_PPL_FMAB_OFF		3
+#define BCMA_CC_PPL_MRAT_MASK		0xf0000000
+#define BCMA_CC_PPL_MRAT_SHIFT		28
+#define BCMA_CC_PPL_ABRAT_MASK		0x08000000
+#define BCMA_CC_PPL_ABRAT_SHIFT		27
+#define BCMA_CC_PPL_FDIV_MASK		0x07ffffff
+#define BCMA_CC_PPL_PLLCTL_OFF		4
+#define BCMA_CC_PPL_PCHI_OFF		5
+#define BCMA_CC_PPL_PCHI_MASK		0x0000003f
+
+/* BCM4331 ChipControl numbers. */
+#define BCMA_CHIPCTL_4331_BT_COEXIST		BIT(0)	/* 0 disable */
+#define BCMA_CHIPCTL_4331_SECI			BIT(1)	/* 0 SECI is disabled (JATG functional) */
+#define BCMA_CHIPCTL_4331_EXT_LNA		BIT(2)	/* 0 disable */
+#define BCMA_CHIPCTL_4331_SPROM_GPIO13_15	BIT(3)	/* sprom/gpio13-15 mux */
+#define BCMA_CHIPCTL_4331_EXTPA_EN		BIT(4)	/* 0 ext pa disable, 1 ext pa enabled */
+#define BCMA_CHIPCTL_4331_GPIOCLK_ON_SPROMCS	BIT(5)	/* set drive out GPIO_CLK on sprom_cs pin */
+#define BCMA_CHIPCTL_4331_PCIE_MDIO_ON_SPROMCS	BIT(6)	/* use sprom_cs pin as PCIE mdio interface */
+#define BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5	BIT(7)	/* aband extpa will be at gpio2/5 and sprom_dout */
+#define BCMA_CHIPCTL_4331_OVR_PIPEAUXCLKEN	BIT(8)	/* override core control on pipe_AuxClkEnable */
+#define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN	BIT(9)	/* override core control on pipe_AuxPowerDown */
+#define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN		BIT(10)	/* pcie_auxclkenable */
+#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN	BIT(11)	/* pcie_pipe_pllpowerdown */
+#define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4	BIT(16)	/* enable bt_shd0 at gpio4 */
+#define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5	BIT(17)	/* enable bt_shd1 at gpio5 */
+
+/* Data for the PMU, if available.
+ * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
+ */
+struct bcma_chipcommon_pmu {
+	u8 rev;			/* PMU revision */
+	u32 crystalfreq;	/* The active crystal frequency (in kHz) */
+};
+
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+struct bcma_pflash {
+	u8 buswidth;
+	u32 window;
+	u32 window_size;
+};
+
+struct bcma_serial_port {
+	void *regs;
+	unsigned long clockspeed;
+	unsigned int irq;
+	unsigned int baud_base;
+	unsigned int reg_shift;
+};
+#endif /* CONFIG_BCMA_DRIVER_MIPS */
+
+struct bcma_drv_cc {
+	struct bcma_device *core;
+	u32 status;
+	u32 capabilities;
+	u32 capabilities_ext;
+	u8 setup_done:1;
+	/* Fast Powerup Delay constant */
+	u16 fast_pwrup_delay;
+	struct bcma_chipcommon_pmu pmu;
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+	struct bcma_pflash pflash;
+
+	int nr_serial_ports;
+	struct bcma_serial_port serial_ports[4];
+#endif /* CONFIG_BCMA_DRIVER_MIPS */
+};
+
+/* Register access */
+#define bcma_cc_read32(cc, offset) \
+	bcma_read32((cc)->core, offset)
+#define bcma_cc_write32(cc, offset, val) \
+	bcma_write32((cc)->core, offset, val)
+
+#define bcma_cc_mask32(cc, offset, mask) \
+	bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) & (mask))
+#define bcma_cc_set32(cc, offset, set) \
+	bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) | (set))
+#define bcma_cc_maskset32(cc, offset, mask, set) \
+	bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
+
+extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
+
+extern void bcma_chipco_suspend(struct bcma_drv_cc *cc);
+extern void bcma_chipco_resume(struct bcma_drv_cc *cc);
+
+void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable);
+
+extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc,
+					  u32 ticks);
+
+void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+
+u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask);
+
+/* Chipcommon GPIO pin access. */
+u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask);
+u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);
+
+/* PMU support */
+extern void bcma_pmu_init(struct bcma_drv_cc *cc);
+
+extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset,
+				  u32 value);
+extern void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset,
+				    u32 mask, u32 set);
+extern void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc,
+					u32 offset, u32 mask, u32 set);
+extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc,
+				       u32 offset, u32 mask, u32 set);
+
+#endif /* LINUX_BCMA_DRIVER_CC_H_ */
diff --git a/include/linux/bcma/bcma_driver_mips.h b/include/linux/bcma/bcma_driver_mips.h
new file mode 100644
index 00000000..c0043645
--- /dev/null
+++ b/include/linux/bcma/bcma_driver_mips.h
@@ -0,0 +1,51 @@
+#ifndef LINUX_BCMA_DRIVER_MIPS_H_
+#define LINUX_BCMA_DRIVER_MIPS_H_
+
+#define BCMA_MIPS_IPSFLAG		0x0F08
+/* which sbflags get routed to mips interrupt 1 */
+#define  BCMA_MIPS_IPSFLAG_IRQ1		0x0000003F
+#define  BCMA_MIPS_IPSFLAG_IRQ1_SHIFT	0
+/* which sbflags get routed to mips interrupt 2 */
+#define  BCMA_MIPS_IPSFLAG_IRQ2		0x00003F00
+#define  BCMA_MIPS_IPSFLAG_IRQ2_SHIFT	8
+/* which sbflags get routed to mips interrupt 3 */
+#define  BCMA_MIPS_IPSFLAG_IRQ3		0x003F0000
+#define  BCMA_MIPS_IPSFLAG_IRQ3_SHIFT	16
+/* which sbflags get routed to mips interrupt 4 */
+#define  BCMA_MIPS_IPSFLAG_IRQ4		0x3F000000
+#define  BCMA_MIPS_IPSFLAG_IRQ4_SHIFT	24
+
+/* MIPS 74K core registers */
+#define BCMA_MIPS_MIPS74K_CORECTL	0x0000
+#define BCMA_MIPS_MIPS74K_EXCEPTBASE	0x0004
+#define BCMA_MIPS_MIPS74K_BIST		0x000C
+#define BCMA_MIPS_MIPS74K_INTMASK_INT0	0x0014
+#define BCMA_MIPS_MIPS74K_INTMASK(int) \
+	((int) * 4 + BCMA_MIPS_MIPS74K_INTMASK_INT0)
+#define BCMA_MIPS_MIPS74K_NMIMASK	0x002C
+#define BCMA_MIPS_MIPS74K_GPIOSEL	0x0040
+#define BCMA_MIPS_MIPS74K_GPIOOUT	0x0044
+#define BCMA_MIPS_MIPS74K_GPIOEN	0x0048
+#define BCMA_MIPS_MIPS74K_CLKCTLST	0x01E0
+
+#define BCMA_MIPS_OOBSELOUTA30		0x100
+
+struct bcma_device;
+
+struct bcma_drv_mips {
+	struct bcma_device *core;
+	u8 setup_done:1;
+	unsigned int assigned_irqs;
+};
+
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
+#else
+static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
+#endif
+
+extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore);
+
+extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
+
+#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */
diff --git a/include/linux/bcma/bcma_driver_pci.h b/include/linux/bcma/bcma_driver_pci.h
new file mode 100644
index 00000000..46c71e27
--- /dev/null
+++ b/include/linux/bcma/bcma_driver_pci.h
@@ -0,0 +1,214 @@
+#ifndef LINUX_BCMA_DRIVER_PCI_H_
+#define LINUX_BCMA_DRIVER_PCI_H_
+
+#include <linux/types.h>
+
+struct pci_dev;
+
+/** PCI core registers. **/
+#define BCMA_CORE_PCI_CTL			0x0000	/* PCI Control */
+#define  BCMA_CORE_PCI_CTL_RST_OE		0x00000001 /* PCI_RESET Output Enable */
+#define  BCMA_CORE_PCI_CTL_RST			0x00000002 /* PCI_RESET driven out to pin */
+#define  BCMA_CORE_PCI_CTL_CLK_OE		0x00000004 /* Clock gate Output Enable */
+#define  BCMA_CORE_PCI_CTL_CLK			0x00000008 /* Gate for clock driven out to pin */
+#define BCMA_CORE_PCI_ARBCTL			0x0010	/* PCI Arbiter Control */
+#define  BCMA_CORE_PCI_ARBCTL_INTERN		0x00000001 /* Use internal arbiter */
+#define  BCMA_CORE_PCI_ARBCTL_EXTERN		0x00000002 /* Use external arbiter */
+#define  BCMA_CORE_PCI_ARBCTL_PARKID		0x00000006 /* Mask, selects which agent is parked on an idle bus */
+#define   BCMA_CORE_PCI_ARBCTL_PARKID_LAST	0x00000000 /* Last requestor */
+#define   BCMA_CORE_PCI_ARBCTL_PARKID_4710	0x00000002 /* 4710 */
+#define   BCMA_CORE_PCI_ARBCTL_PARKID_EXT0	0x00000004 /* External requestor 0 */
+#define   BCMA_CORE_PCI_ARBCTL_PARKID_EXT1	0x00000006 /* External requestor 1 */
+#define BCMA_CORE_PCI_ISTAT			0x0020	/* Interrupt status */
+#define  BCMA_CORE_PCI_ISTAT_INTA		0x00000001 /* PCI INTA# */
+#define  BCMA_CORE_PCI_ISTAT_INTB		0x00000002 /* PCI INTB# */
+#define  BCMA_CORE_PCI_ISTAT_SERR		0x00000004 /* PCI SERR# (write to clear) */
+#define  BCMA_CORE_PCI_ISTAT_PERR		0x00000008 /* PCI PERR# (write to clear) */
+#define  BCMA_CORE_PCI_ISTAT_PME		0x00000010 /* PCI PME# */
+#define BCMA_CORE_PCI_IMASK			0x0024	/* Interrupt mask */
+#define  BCMA_CORE_PCI_IMASK_INTA		0x00000001 /* PCI INTA# */
+#define  BCMA_CORE_PCI_IMASK_INTB		0x00000002 /* PCI INTB# */
+#define  BCMA_CORE_PCI_IMASK_SERR		0x00000004 /* PCI SERR# */
+#define  BCMA_CORE_PCI_IMASK_PERR		0x00000008 /* PCI PERR# */
+#define  BCMA_CORE_PCI_IMASK_PME		0x00000010 /* PCI PME# */
+#define BCMA_CORE_PCI_MBOX			0x0028	/* Backplane to PCI Mailbox */
+#define  BCMA_CORE_PCI_MBOX_F0_0		0x00000100 /* PCI function 0, INT 0 */
+#define  BCMA_CORE_PCI_MBOX_F0_1		0x00000200 /* PCI function 0, INT 1 */
+#define  BCMA_CORE_PCI_MBOX_F1_0		0x00000400 /* PCI function 1, INT 0 */
+#define  BCMA_CORE_PCI_MBOX_F1_1		0x00000800 /* PCI function 1, INT 1 */
+#define  BCMA_CORE_PCI_MBOX_F2_0		0x00001000 /* PCI function 2, INT 0 */
+#define  BCMA_CORE_PCI_MBOX_F2_1		0x00002000 /* PCI function 2, INT 1 */
+#define  BCMA_CORE_PCI_MBOX_F3_0		0x00004000 /* PCI function 3, INT 0 */
+#define  BCMA_CORE_PCI_MBOX_F3_1		0x00008000 /* PCI function 3, INT 1 */
+#define BCMA_CORE_PCI_BCAST_ADDR		0x0050	/* Backplane Broadcast Address */
+#define  BCMA_CORE_PCI_BCAST_ADDR_MASK		0x000000FF
+#define BCMA_CORE_PCI_BCAST_DATA		0x0054	/* Backplane Broadcast Data */
+#define BCMA_CORE_PCI_GPIO_IN			0x0060	/* rev >= 2 only */
+#define BCMA_CORE_PCI_GPIO_OUT			0x0064	/* rev >= 2 only */
+#define BCMA_CORE_PCI_GPIO_ENABLE		0x0068	/* rev >= 2 only */
+#define BCMA_CORE_PCI_GPIO_CTL			0x006C	/* rev >= 2 only */
+#define BCMA_CORE_PCI_SBTOPCI0			0x0100	/* Backplane to PCI translation 0 (sbtopci0) */
+#define  BCMA_CORE_PCI_SBTOPCI0_MASK		0xFC000000
+#define BCMA_CORE_PCI_SBTOPCI1			0x0104	/* Backplane to PCI translation 1 (sbtopci1) */
+#define  BCMA_CORE_PCI_SBTOPCI1_MASK		0xFC000000
+#define BCMA_CORE_PCI_SBTOPCI2			0x0108	/* Backplane to PCI translation 2 (sbtopci2) */
+#define  BCMA_CORE_PCI_SBTOPCI2_MASK		0xC0000000
+#define BCMA_CORE_PCI_CONFIG_ADDR		0x0120	/* pcie config space access */
+#define BCMA_CORE_PCI_CONFIG_DATA		0x0124	/* pcie config space access */
+#define BCMA_CORE_PCI_MDIO_CONTROL		0x0128	/* controls the mdio access */
+#define  BCMA_CORE_PCI_MDIOCTL_DIVISOR_MASK	0x7f	/* clock to be used on MDIO */
+#define  BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL	0x2
+#define  BCMA_CORE_PCI_MDIOCTL_PREAM_EN		0x80	/* Enable preamble sequnce */
+#define  BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE	0x100	/* Tranaction complete */
+#define BCMA_CORE_PCI_MDIO_DATA			0x012c	/* Data to the mdio access */
+#define  BCMA_CORE_PCI_MDIODATA_MASK		0x0000ffff /* data 2 bytes */
+#define  BCMA_CORE_PCI_MDIODATA_TA		0x00020000 /* Turnaround */
+#define  BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD	18	/* Regaddr shift (rev < 10) */
+#define  BCMA_CORE_PCI_MDIODATA_REGADDR_MASK_OLD	0x003c0000 /* Regaddr Mask (rev < 10) */
+#define  BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD	22	/* Physmedia devaddr shift (rev < 10) */
+#define  BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK_OLD	0x0fc00000 /* Physmedia devaddr Mask (rev < 10) */
+#define  BCMA_CORE_PCI_MDIODATA_REGADDR_SHF	18	/* Regaddr shift */
+#define  BCMA_CORE_PCI_MDIODATA_REGADDR_MASK	0x007c0000 /* Regaddr Mask */
+#define  BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF	23	/* Physmedia devaddr shift */
+#define  BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK	0x0f800000 /* Physmedia devaddr Mask */
+#define  BCMA_CORE_PCI_MDIODATA_WRITE		0x10000000 /* write Transaction */
+#define  BCMA_CORE_PCI_MDIODATA_READ		0x20000000 /* Read Transaction */
+#define  BCMA_CORE_PCI_MDIODATA_START		0x40000000 /* start of Transaction */
+#define  BCMA_CORE_PCI_MDIODATA_DEV_ADDR	0x0	/* dev address for serdes */
+#define  BCMA_CORE_PCI_MDIODATA_BLK_ADDR	0x1F	/* blk address for serdes */
+#define  BCMA_CORE_PCI_MDIODATA_DEV_PLL		0x1d	/* SERDES PLL Dev */
+#define  BCMA_CORE_PCI_MDIODATA_DEV_TX		0x1e	/* SERDES TX Dev */
+#define  BCMA_CORE_PCI_MDIODATA_DEV_RX		0x1f	/* SERDES RX Dev */
+#define BCMA_CORE_PCI_PCIEIND_ADDR		0x0130	/* indirect access to the internal register */
+#define BCMA_CORE_PCI_PCIEIND_DATA		0x0134	/* Data to/from the internal regsiter */
+#define BCMA_CORE_PCI_CLKREQENCTRL		0x0138	/*  >= rev 6, Clkreq rdma control */
+#define BCMA_CORE_PCI_PCICFG0			0x0400	/* PCI config space 0 (rev >= 8) */
+#define BCMA_CORE_PCI_PCICFG1			0x0500	/* PCI config space 1 (rev >= 8) */
+#define BCMA_CORE_PCI_PCICFG2			0x0600	/* PCI config space 2 (rev >= 8) */
+#define BCMA_CORE_PCI_PCICFG3			0x0700	/* PCI config space 3 (rev >= 8) */
+#define BCMA_CORE_PCI_SPROM(wordoffset)		(0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */
+
+/* SBtoPCIx */
+#define BCMA_CORE_PCI_SBTOPCI_MEM		0x00000000
+#define BCMA_CORE_PCI_SBTOPCI_IO		0x00000001
+#define BCMA_CORE_PCI_SBTOPCI_CFG0		0x00000002
+#define BCMA_CORE_PCI_SBTOPCI_CFG1		0x00000003
+#define BCMA_CORE_PCI_SBTOPCI_PREF		0x00000004 /* Prefetch enable */
+#define BCMA_CORE_PCI_SBTOPCI_BURST		0x00000008 /* Burst enable */
+#define BCMA_CORE_PCI_SBTOPCI_MRM		0x00000020 /* Memory Read Multiple */
+#define BCMA_CORE_PCI_SBTOPCI_RC		0x00000030 /* Read Command mask (rev >= 11) */
+#define  BCMA_CORE_PCI_SBTOPCI_RC_READ		0x00000000 /* Memory read */
+#define  BCMA_CORE_PCI_SBTOPCI_RC_READL		0x00000010 /* Memory read line */
+#define  BCMA_CORE_PCI_SBTOPCI_RC_READM		0x00000020 /* Memory read multiple */
+
+/* PCIE protocol PHY diagnostic registers */
+#define BCMA_CORE_PCI_PLP_MODEREG		0x200	/* Mode */
+#define BCMA_CORE_PCI_PLP_STATUSREG		0x204	/* Status */
+#define  BCMA_CORE_PCI_PLP_POLARITYINV_STAT	0x10	/* Status reg PCIE_PLP_STATUSREG */
+#define BCMA_CORE_PCI_PLP_LTSSMCTRLREG		0x208	/* LTSSM control */
+#define BCMA_CORE_PCI_PLP_LTLINKNUMREG		0x20c	/* Link Training Link number */
+#define BCMA_CORE_PCI_PLP_LTLANENUMREG		0x210	/* Link Training Lane number */
+#define BCMA_CORE_PCI_PLP_LTNFTSREG		0x214	/* Link Training N_FTS */
+#define BCMA_CORE_PCI_PLP_ATTNREG		0x218	/* Attention */
+#define BCMA_CORE_PCI_PLP_ATTNMASKREG		0x21C	/* Attention Mask */
+#define BCMA_CORE_PCI_PLP_RXERRCTR		0x220	/* Rx Error */
+#define BCMA_CORE_PCI_PLP_RXFRMERRCTR		0x224	/* Rx Framing Error */
+#define BCMA_CORE_PCI_PLP_RXERRTHRESHREG	0x228	/* Rx Error threshold */
+#define BCMA_CORE_PCI_PLP_TESTCTRLREG		0x22C	/* Test Control reg */
+#define BCMA_CORE_PCI_PLP_SERDESCTRLOVRDREG	0x230	/* SERDES Control Override */
+#define BCMA_CORE_PCI_PLP_TIMINGOVRDREG		0x234	/* Timing param override */
+#define BCMA_CORE_PCI_PLP_RXTXSMDIAGREG		0x238	/* RXTX State Machine Diag */
+#define BCMA_CORE_PCI_PLP_LTSSMDIAGREG		0x23C	/* LTSSM State Machine Diag */
+
+/* PCIE protocol DLLP diagnostic registers */
+#define BCMA_CORE_PCI_DLLP_LCREG		0x100	/* Link Control */
+#define BCMA_CORE_PCI_DLLP_LSREG		0x104	/* Link Status */
+#define BCMA_CORE_PCI_DLLP_LAREG		0x108	/* Link Attention */
+#define  BCMA_CORE_PCI_DLLP_LSREG_LINKUP	(1 << 16)
+#define BCMA_CORE_PCI_DLLP_LAMASKREG		0x10C	/* Link Attention Mask */
+#define BCMA_CORE_PCI_DLLP_NEXTTXSEQNUMREG	0x110	/* Next Tx Seq Num */
+#define BCMA_CORE_PCI_DLLP_ACKEDTXSEQNUMREG	0x114	/* Acked Tx Seq Num */
+#define BCMA_CORE_PCI_DLLP_PURGEDTXSEQNUMREG	0x118	/* Purged Tx Seq Num */
+#define BCMA_CORE_PCI_DLLP_RXSEQNUMREG		0x11C	/* Rx Sequence Number */
+#define BCMA_CORE_PCI_DLLP_LRREG		0x120	/* Link Replay */
+#define BCMA_CORE_PCI_DLLP_LACKTOREG		0x124	/* Link Ack Timeout */
+#define BCMA_CORE_PCI_DLLP_PMTHRESHREG		0x128	/* Power Management Threshold */
+#define BCMA_CORE_PCI_DLLP_RTRYWPREG		0x12C	/* Retry buffer write ptr */
+#define BCMA_CORE_PCI_DLLP_RTRYRPREG		0x130	/* Retry buffer Read ptr */
+#define BCMA_CORE_PCI_DLLP_RTRYPPREG		0x134	/* Retry buffer Purged ptr */
+#define BCMA_CORE_PCI_DLLP_RTRRWREG		0x138	/* Retry buffer Read/Write */
+#define BCMA_CORE_PCI_DLLP_ECTHRESHREG		0x13C	/* Error Count Threshold */
+#define BCMA_CORE_PCI_DLLP_TLPERRCTRREG		0x140	/* TLP Error Counter */
+#define BCMA_CORE_PCI_DLLP_ERRCTRREG		0x144	/* Error Counter */
+#define BCMA_CORE_PCI_DLLP_NAKRXCTRREG		0x148	/* NAK Received Counter */
+#define BCMA_CORE_PCI_DLLP_TESTREG		0x14C	/* Test */
+#define BCMA_CORE_PCI_DLLP_PKTBIST		0x150	/* Packet BIST */
+#define BCMA_CORE_PCI_DLLP_PCIE11		0x154	/* DLLP PCIE 1.1 reg */
+
+/* SERDES RX registers */
+#define BCMA_CORE_PCI_SERDES_RX_CTRL		1	/* Rx cntrl */
+#define  BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE	0x80	/* rxpolarity_force */
+#define  BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY	0x40	/* rxpolarity_value */
+#define BCMA_CORE_PCI_SERDES_RX_TIMER1		2	/* Rx Timer1 */
+#define BCMA_CORE_PCI_SERDES_RX_CDR		6	/* CDR */
+#define BCMA_CORE_PCI_SERDES_RX_CDRBW		7	/* CDR BW */
+
+/* SERDES PLL registers */
+#define BCMA_CORE_PCI_SERDES_PLL_CTRL		1	/* PLL control reg */
+#define BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN	0x4000	/* bit 14 is FREQDET on */
+
+/* PCIcore specific boardflags */
+#define BCMA_CORE_PCI_BFL_NOPCI			0x00000400 /* Board leaves PCI floating */
+
+/* PCIE Config space accessing MACROS */
+#define BCMA_CORE_PCI_CFG_BUS_SHIFT		24	/* Bus shift */
+#define BCMA_CORE_PCI_CFG_SLOT_SHIFT		19	/* Slot/Device shift */
+#define BCMA_CORE_PCI_CFG_FUN_SHIFT		16	/* Function shift */
+#define BCMA_CORE_PCI_CFG_OFF_SHIFT		0	/* Register shift */
+
+#define BCMA_CORE_PCI_CFG_BUS_MASK		0xff	/* Bus mask */
+#define BCMA_CORE_PCI_CFG_SLOT_MASK		0x1f	/* Slot/Device mask */
+#define BCMA_CORE_PCI_CFG_FUN_MASK		7	/* Function mask */
+#define BCMA_CORE_PCI_CFG_OFF_MASK		0xfff	/* Register mask */
+
+/* PCIE Root Capability Register bits (Host mode only) */
+#define BCMA_CORE_PCI_RC_CRS_VISIBILITY		0x0001
+
+struct bcma_drv_pci;
+
+#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
+struct bcma_drv_pci_host {
+	struct bcma_drv_pci *pdev;
+
+	u32 host_cfg_addr;
+	spinlock_t cfgspace_lock;
+
+	struct pci_controller pci_controller;
+	struct pci_ops pci_ops;
+	struct resource mem_resource;
+	struct resource io_resource;
+};
+#endif
+
+struct bcma_drv_pci {
+	struct bcma_device *core;
+	u8 setup_done:1;
+	u8 hostmode:1;
+
+#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
+	struct bcma_drv_pci_host *host_controller;
+#endif
+};
+
+/* Register access */
+#define pcicore_read32(pc, offset)		bcma_read32((pc)->core, offset)
+#define pcicore_write32(pc, offset, val)	bcma_write32((pc)->core, offset, val)
+
+extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc);
+extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc,
+				 struct bcma_device *core, bool enable);
+
+extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev);
+extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev);
+
+#endif /* LINUX_BCMA_DRIVER_PCI_H_ */
diff --git a/include/linux/bcma/bcma_regs.h b/include/linux/bcma/bcma_regs.h
new file mode 100644
index 00000000..5a71d571
--- /dev/null
+++ b/include/linux/bcma/bcma_regs.h
@@ -0,0 +1,86 @@
+#ifndef LINUX_BCMA_REGS_H_
+#define LINUX_BCMA_REGS_H_
+
+/* Some single registers are shared between many cores */
+/* BCMA_CLKCTLST: ChipCommon (rev >= 20), PCIe, 80211 */
+#define BCMA_CLKCTLST			0x01E0 /* Clock control and status */
+#define  BCMA_CLKCTLST_FORCEALP		0x00000001 /* Force ALP request */
+#define  BCMA_CLKCTLST_FORCEHT		0x00000002 /* Force HT request */
+#define  BCMA_CLKCTLST_FORCEILP		0x00000004 /* Force ILP request */
+#define  BCMA_CLKCTLST_HAVEALPREQ	0x00000008 /* ALP available request */
+#define  BCMA_CLKCTLST_HAVEHTREQ	0x00000010 /* HT available request */
+#define  BCMA_CLKCTLST_HWCROFF		0x00000020 /* Force HW clock request off */
+#define  BCMA_CLKCTLST_EXTRESREQ	0x00000700 /* Mask of external resource requests */
+#define  BCMA_CLKCTLST_HAVEALP		0x00010000 /* ALP available */
+#define  BCMA_CLKCTLST_HAVEHT		0x00020000 /* HT available */
+#define  BCMA_CLKCTLST_BP_ON_ALP	0x00040000 /* RO: running on ALP clock */
+#define  BCMA_CLKCTLST_BP_ON_HT		0x00080000 /* RO: running on HT clock */
+#define  BCMA_CLKCTLST_EXTRESST		0x07000000 /* Mask of external resource status */
+/* Is there any BCM4328 on BCMA bus? */
+#define  BCMA_CLKCTLST_4328A0_HAVEHT	0x00010000 /* 4328a0 has reversed bits */
+#define  BCMA_CLKCTLST_4328A0_HAVEALP	0x00020000 /* 4328a0 has reversed bits */
+
+/* Agent registers (common for every core) */
+#define BCMA_IOCTL			0x0408 /* IO control */
+#define  BCMA_IOCTL_CLK			0x0001
+#define  BCMA_IOCTL_FGC			0x0002
+#define  BCMA_IOCTL_CORE_BITS		0x3FFC
+#define  BCMA_IOCTL_PME_EN		0x4000
+#define  BCMA_IOCTL_BIST_EN		0x8000
+#define BCMA_IOST			0x0500 /* IO status */
+#define  BCMA_IOST_CORE_BITS		0x0FFF
+#define  BCMA_IOST_DMA64		0x1000
+#define  BCMA_IOST_GATED_CLK		0x2000
+#define  BCMA_IOST_BIST_ERROR		0x4000
+#define  BCMA_IOST_BIST_DONE		0x8000
+#define BCMA_RESET_CTL			0x0800
+#define  BCMA_RESET_CTL_RESET		0x0001
+
+/* BCMA PCI config space registers. */
+#define BCMA_PCI_PMCSR			0x44
+#define  BCMA_PCI_PE			0x100
+#define BCMA_PCI_BAR0_WIN		0x80	/* Backplane address space 0 */
+#define BCMA_PCI_BAR1_WIN		0x84	/* Backplane address space 1 */
+#define BCMA_PCI_SPROMCTL		0x88	/* SPROM control */
+#define  BCMA_PCI_SPROMCTL_WE		0x10	/* SPROM write enable */
+#define BCMA_PCI_BAR1_CONTROL		0x8c	/* Address space 1 burst control */
+#define BCMA_PCI_IRQS			0x90	/* PCI interrupts */
+#define BCMA_PCI_IRQMASK		0x94	/* PCI IRQ control and mask (pcirev >= 6 only) */
+#define BCMA_PCI_BACKPLANE_IRQS		0x98	/* Backplane Interrupts */
+#define BCMA_PCI_BAR0_WIN2		0xAC
+#define BCMA_PCI_GPIO_IN		0xB0	/* GPIO Input (pcirev >= 3 only) */
+#define BCMA_PCI_GPIO_OUT		0xB4	/* GPIO Output (pcirev >= 3 only) */
+#define BCMA_PCI_GPIO_OUT_ENABLE	0xB8	/* GPIO Output Enable/Disable (pcirev >= 3 only) */
+#define  BCMA_PCI_GPIO_SCS		0x10	/* PCI config space bit 4 for 4306c0 slow clock source */
+#define  BCMA_PCI_GPIO_HWRAD		0x20	/* PCI config space GPIO 13 for hw radio disable */
+#define  BCMA_PCI_GPIO_XTAL		0x40	/* PCI config space GPIO 14 for Xtal powerup */
+#define  BCMA_PCI_GPIO_PLL		0x80	/* PCI config space GPIO 15 for PLL powerdown */
+
+/* SiliconBackplane Address Map.
+ * All regions may not exist on all chips.
+ */
+#define BCMA_SOC_SDRAM_BASE		0x00000000U	/* Physical SDRAM */
+#define BCMA_SOC_PCI_MEM		0x08000000U	/* Host Mode sb2pcitranslation0 (64 MB) */
+#define BCMA_SOC_PCI_MEM_SZ		(64 * 1024 * 1024)
+#define BCMA_SOC_PCI_CFG		0x0c000000U	/* Host Mode sb2pcitranslation1 (64 MB) */
+#define BCMA_SOC_SDRAM_SWAPPED		0x10000000U	/* Byteswapped Physical SDRAM */
+#define BCMA_SOC_SDRAM_R2		0x80000000U	/* Region 2 for sdram (512 MB) */
+
+
+#define BCMA_SOC_PCI_DMA		0x40000000U	/* Client Mode sb2pcitranslation2 (1 GB) */
+#define BCMA_SOC_PCI_DMA2		0x80000000U	/* Client Mode sb2pcitranslation2 (1 GB) */
+#define BCMA_SOC_PCI_DMA_SZ		0x40000000U	/* Client Mode sb2pcitranslation2 size in bytes */
+#define BCMA_SOC_PCIE_DMA_L32		0x00000000U	/* PCIE Client Mode sb2pcitranslation2
+							 * (2 ZettaBytes), low 32 bits
+							 */
+#define BCMA_SOC_PCIE_DMA_H32		0x80000000U	/* PCIE Client Mode sb2pcitranslation2
+							 * (2 ZettaBytes), high 32 bits
+							 */
+
+#define BCMA_SOC_PCI1_MEM		0x40000000U	/* Host Mode sb2pcitranslation0 (64 MB) */
+#define BCMA_SOC_PCI1_CFG		0x44000000U	/* Host Mode sb2pcitranslation1 (64 MB) */
+#define BCMA_SOC_PCIE1_DMA_H32		0xc0000000U	/* PCIE Client Mode sb2pcitranslation2
+							 * (2 ZettaBytes), high 32 bits
+							 */
+
+#endif /* LINUX_BCMA_REGS_H_ */
diff --git a/include/linux/bcma/bcma_soc.h b/include/linux/bcma/bcma_soc.h
new file mode 100644
index 00000000..4203c559
--- /dev/null
+++ b/include/linux/bcma/bcma_soc.h
@@ -0,0 +1,16 @@
+#ifndef LINUX_BCMA_SOC_H_
+#define LINUX_BCMA_SOC_H_
+
+#include <linux/bcma/bcma.h>
+
+struct bcma_soc {
+	struct bcma_bus bus;
+	struct bcma_device core_cc;
+	struct bcma_device core_mips;
+};
+
+int __init bcma_host_soc_register(struct bcma_soc *soc);
+
+int bcma_bus_register(struct bcma_bus *bus);
+
+#endif /* LINUX_BCMA_SOC_H_ */
diff --git a/include/linux/bfin_mac.h b/include/linux/bfin_mac.h
new file mode 100644
index 00000000..a69554ef
--- /dev/null
+++ b/include/linux/bfin_mac.h
@@ -0,0 +1,30 @@
+/*
+ * Blackfin On-Chip MAC Driver
+ *
+ * Copyright 2004-2010 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _LINUX_BFIN_MAC_H_
+#define _LINUX_BFIN_MAC_H_
+
+#include <linux/phy.h>
+
+struct bfin_phydev_platform_data {
+	unsigned short addr;
+	int irq;
+};
+
+struct bfin_mii_bus_platform_data {
+	int phydev_number;
+	struct bfin_phydev_platform_data *phydev_data;
+	const unsigned short *mac_peripherals;
+	int phy_mode;
+	unsigned int phy_mask;
+	unsigned short vlan1_mask, vlan2_mask;
+};
+
+#endif
diff --git a/include/linux/bfs_fs.h b/include/linux/bfs_fs.h
new file mode 100644
index 00000000..1c0b355a
--- /dev/null
+++ b/include/linux/bfs_fs.h
@@ -0,0 +1,81 @@
+/*
+ *	include/linux/bfs_fs.h - BFS data structures on disk.
+ *	Copyright (C) 1999 Tigran Aivazian <tigran@veritas.com>
+ */
+
+#ifndef _LINUX_BFS_FS_H
+#define _LINUX_BFS_FS_H
+
+#include <linux/types.h>
+
+#define BFS_BSIZE_BITS		9
+#define BFS_BSIZE		(1<<BFS_BSIZE_BITS)
+
+#define BFS_MAGIC		0x1BADFACE
+#define BFS_ROOT_INO		2
+#define BFS_INODES_PER_BLOCK	8
+
+/* SVR4 vnode type values (bfs_inode->i_vtype) */
+#define BFS_VDIR 2L
+#define BFS_VREG 1L
+
+/* BFS inode layout on disk */
+struct bfs_inode {
+	__le16 i_ino;
+	__u16 i_unused;
+	__le32 i_sblock;
+	__le32 i_eblock;
+	__le32 i_eoffset;
+	__le32 i_vtype;
+	__le32 i_mode;
+	__le32 i_uid;
+	__le32 i_gid;
+	__le32 i_nlink;
+	__le32 i_atime;
+	__le32 i_mtime;
+	__le32 i_ctime;
+	__u32 i_padding[4];
+};
+
+#define BFS_NAMELEN		14	
+#define BFS_DIRENT_SIZE		16
+#define BFS_DIRS_PER_BLOCK	32
+
+struct bfs_dirent {
+	__le16 ino;
+	char name[BFS_NAMELEN];
+};
+
+/* BFS superblock layout on disk */
+struct bfs_super_block {
+	__le32 s_magic;
+	__le32 s_start;
+	__le32 s_end;
+	__le32 s_from;
+	__le32 s_to;
+	__s32 s_bfrom;
+	__s32 s_bto;
+	char  s_fsname[6];
+	char  s_volume[6];
+	__u32 s_padding[118];
+};
+
+
+#define BFS_OFF2INO(offset) \
+        ((((offset) - BFS_BSIZE) / sizeof(struct bfs_inode)) + BFS_ROOT_INO)
+
+#define BFS_INO2OFF(ino) \
+	((__u32)(((ino) - BFS_ROOT_INO) * sizeof(struct bfs_inode)) + BFS_BSIZE)
+#define BFS_NZFILESIZE(ip) \
+        ((le32_to_cpu((ip)->i_eoffset) + 1) -  le32_to_cpu((ip)->i_sblock) * BFS_BSIZE)
+
+#define BFS_FILESIZE(ip) \
+        ((ip)->i_sblock == 0 ? 0 : BFS_NZFILESIZE(ip))
+
+#define BFS_FILEBLOCKS(ip) \
+        ((ip)->i_sblock == 0 ? 0 : (le32_to_cpu((ip)->i_eblock) + 1) -  le32_to_cpu((ip)->i_sblock))
+#define BFS_UNCLEAN(bfs_sb, sb)	\
+	((le32_to_cpu(bfs_sb->s_from) != -1) && (le32_to_cpu(bfs_sb->s_to) != -1) && !(sb->s_flags & MS_RDONLY))
+
+
+#endif	/* _LINUX_BFS_FS_H */
diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h
new file mode 100644
index 00000000..366422bc
--- /dev/null
+++ b/include/linux/binfmts.h
@@ -0,0 +1,140 @@
+#ifndef _LINUX_BINFMTS_H
+#define _LINUX_BINFMTS_H
+
+#include <linux/capability.h>
+
+struct pt_regs;
+
+/*
+ * These are the maximum length and maximum number of strings passed to the
+ * execve() system call.  MAX_ARG_STRLEN is essentially random but serves to
+ * prevent the kernel from being unduly impacted by misaddressed pointers.
+ * MAX_ARG_STRINGS is chosen to fit in a signed 32-bit integer.
+ */
+#define MAX_ARG_STRLEN (PAGE_SIZE * 32)
+#define MAX_ARG_STRINGS 0x7FFFFFFF
+
+/* sizeof(linux_binprm->buf) */
+#define BINPRM_BUF_SIZE 128
+
+#ifdef __KERNEL__
+#include <linux/sched.h>
+
+#define CORENAME_MAX_SIZE 128
+
+/*
+ * This structure is used to hold the arguments that are used when loading binaries.
+ */
+struct linux_binprm {
+	char buf[BINPRM_BUF_SIZE];
+#ifdef CONFIG_MMU
+	struct vm_area_struct *vma;
+	unsigned long vma_pages;
+#else
+# define MAX_ARG_PAGES	32
+	struct page *page[MAX_ARG_PAGES];
+#endif
+	struct mm_struct *mm;
+	unsigned long p; /* current top of mem */
+	unsigned int
+		cred_prepared:1,/* true if creds already prepared (multiple
+				 * preps happen for interpreters) */
+		cap_effective:1;/* true if has elevated effective capabilities,
+				 * false if not; except for init which inherits
+				 * its parent's caps anyway */
+#ifdef __alpha__
+	unsigned int taso:1;
+#endif
+	unsigned int recursion_depth;
+	struct file * file;
+	struct cred *cred;	/* new credentials */
+	int unsafe;		/* how unsafe this exec is (mask of LSM_UNSAFE_*) */
+	unsigned int per_clear;	/* bits to clear in current->personality */
+	int argc, envc;
+	const char * filename;	/* Name of binary as seen by procps */
+	const char * interp;	/* Name of the binary really executed. Most
+				   of the time same as filename, but could be
+				   different for binfmt_{misc,script} */
+	unsigned interp_flags;
+	unsigned interp_data;
+	unsigned long loader, exec;
+	char tcomm[TASK_COMM_LEN];
+};
+
+#define BINPRM_FLAGS_ENFORCE_NONDUMP_BIT 0
+#define BINPRM_FLAGS_ENFORCE_NONDUMP (1 << BINPRM_FLAGS_ENFORCE_NONDUMP_BIT)
+
+/* fd of the binary should be passed to the interpreter */
+#define BINPRM_FLAGS_EXECFD_BIT 1
+#define BINPRM_FLAGS_EXECFD (1 << BINPRM_FLAGS_EXECFD_BIT)
+
+#define BINPRM_MAX_RECURSION 4
+
+/* Function parameter for binfmt->coredump */
+struct coredump_params {
+	long signr;
+	struct pt_regs *regs;
+	struct file *file;
+	unsigned long limit;
+	unsigned long mm_flags;
+};
+
+/*
+ * This structure defines the functions that are used to load the binary formats that
+ * linux accepts.
+ */
+struct linux_binfmt {
+	struct list_head lh;
+	struct module *module;
+	int (*load_binary)(struct linux_binprm *, struct  pt_regs * regs);
+	int (*load_shlib)(struct file *);
+	int (*core_dump)(struct coredump_params *cprm);
+	unsigned long min_coredump;	/* minimal dump size */
+};
+
+extern void __register_binfmt(struct linux_binfmt *fmt, int insert);
+
+/* Registration of default binfmt handlers */
+static inline void register_binfmt(struct linux_binfmt *fmt)
+{
+	__register_binfmt(fmt, 0);
+}
+/* Same as above, but adds a new binfmt at the top of the list */
+static inline void insert_binfmt(struct linux_binfmt *fmt)
+{
+	__register_binfmt(fmt, 1);
+}
+
+extern void unregister_binfmt(struct linux_binfmt *);
+
+extern int prepare_binprm(struct linux_binprm *);
+extern int __must_check remove_arg_zero(struct linux_binprm *);
+extern int search_binary_handler(struct linux_binprm *, struct pt_regs *);
+extern int flush_old_exec(struct linux_binprm * bprm);
+extern void setup_new_exec(struct linux_binprm * bprm);
+extern void would_dump(struct linux_binprm *, struct file *);
+
+extern int suid_dumpable;
+#define SUID_DUMP_DISABLE	0	/* No setuid dumping */
+#define SUID_DUMP_USER		1	/* Dump as user of process */
+#define SUID_DUMP_ROOT		2	/* Dump as root */
+
+/* Stack area protections */
+#define EXSTACK_DEFAULT   0	/* Whatever the arch defaults to */
+#define EXSTACK_DISABLE_X 1	/* Disable executable stacks */
+#define EXSTACK_ENABLE_X  2	/* Enable executable stacks */
+
+extern int setup_arg_pages(struct linux_binprm * bprm,
+			   unsigned long stack_top,
+			   int executable_stack);
+extern int bprm_mm_init(struct linux_binprm *bprm);
+extern int copy_strings_kernel(int argc, const char *const *argv,
+			       struct linux_binprm *bprm);
+extern int prepare_bprm_creds(struct linux_binprm *bprm);
+extern void install_exec_creds(struct linux_binprm *bprm);
+extern void do_coredump(long signr, int exit_code, struct pt_regs *regs);
+extern void set_binfmt(struct linux_binfmt *new);
+extern void free_bprm(struct linux_binprm *);
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_BINFMTS_H */
diff --git a/include/linux/bio.h b/include/linux/bio.h
new file mode 100644
index 00000000..4d94eb8b
--- /dev/null
+++ b/include/linux/bio.h
@@ -0,0 +1,581 @@
+/*
+ * 2.5 block I/O model
+ *
+ * Copyright (C) 2001 Jens Axboe <axboe@suse.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public Licens
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-
+ */
+#ifndef __LINUX_BIO_H
+#define __LINUX_BIO_H
+
+#include <linux/highmem.h>
+#include <linux/mempool.h>
+#include <linux/ioprio.h>
+#include <linux/bug.h>
+
+#ifdef CONFIG_BLOCK
+
+#include <asm/io.h>
+
+/* struct bio, bio_vec and BIO_* flags are defined in blk_types.h */
+#include <linux/blk_types.h>
+
+#define BIO_DEBUG
+
+#ifdef BIO_DEBUG
+#define BIO_BUG_ON	BUG_ON
+#else
+#define BIO_BUG_ON
+#endif
+
+#define BIO_MAX_PAGES		256
+#define BIO_MAX_SIZE		(BIO_MAX_PAGES << PAGE_CACHE_SHIFT)
+#define BIO_MAX_SECTORS		(BIO_MAX_SIZE >> 9)
+
+/*
+ * upper 16 bits of bi_rw define the io priority of this bio
+ */
+#define BIO_PRIO_SHIFT	(8 * sizeof(unsigned long) - IOPRIO_BITS)
+#define bio_prio(bio)	((bio)->bi_rw >> BIO_PRIO_SHIFT)
+#define bio_prio_valid(bio)	ioprio_valid(bio_prio(bio))
+
+#define bio_set_prio(bio, prio)		do {			\
+	WARN_ON(prio >= (1 << IOPRIO_BITS));			\
+	(bio)->bi_rw &= ((1UL << BIO_PRIO_SHIFT) - 1);		\
+	(bio)->bi_rw |= ((unsigned long) (prio) << BIO_PRIO_SHIFT);	\
+} while (0)
+
+/*
+ * various member access, note that bio_data should of course not be used
+ * on highmem page vectors
+ */
+#define bio_iovec_idx(bio, idx)	(&((bio)->bi_io_vec[(idx)]))
+#define bio_iovec(bio)		bio_iovec_idx((bio), (bio)->bi_idx)
+#define bio_page(bio)		bio_iovec((bio))->bv_page
+#define bio_offset(bio)		bio_iovec((bio))->bv_offset
+#define bio_segments(bio)	((bio)->bi_vcnt - (bio)->bi_idx)
+#define bio_sectors(bio)	((bio)->bi_size >> 9)
+
+static inline unsigned int bio_cur_bytes(struct bio *bio)
+{
+	if (bio->bi_vcnt)
+		return bio_iovec(bio)->bv_len;
+	else /* dataless requests such as discard */
+		return bio->bi_size;
+}
+
+static inline void *bio_data(struct bio *bio)
+{
+	if (bio->bi_vcnt)
+		return page_address(bio_page(bio)) + bio_offset(bio);
+
+	return NULL;
+}
+
+static inline int bio_has_allocated_vec(struct bio *bio)
+{
+	return bio->bi_io_vec && bio->bi_io_vec != bio->bi_inline_vecs;
+}
+
+/*
+ * will die
+ */
+#define bio_to_phys(bio)	(page_to_phys(bio_page((bio))) + (unsigned long) bio_offset((bio)))
+#define bvec_to_phys(bv)	(page_to_phys((bv)->bv_page) + (unsigned long) (bv)->bv_offset)
+
+/*
+ * queues that have highmem support enabled may still need to revert to
+ * PIO transfers occasionally and thus map high pages temporarily. For
+ * permanent PIO fall back, user is probably better off disabling highmem
+ * I/O completely on that queue (see ide-dma for example)
+ */
+#define __bio_kmap_atomic(bio, idx, kmtype)				\
+	(kmap_atomic(bio_iovec_idx((bio), (idx))->bv_page) +	\
+		bio_iovec_idx((bio), (idx))->bv_offset)
+
+#define __bio_kunmap_atomic(addr, kmtype) kunmap_atomic(addr)
+
+/*
+ * merge helpers etc
+ */
+
+#define __BVEC_END(bio)		bio_iovec_idx((bio), (bio)->bi_vcnt - 1)
+#define __BVEC_START(bio)	bio_iovec_idx((bio), (bio)->bi_idx)
+
+/* Default implementation of BIOVEC_PHYS_MERGEABLE */
+#define __BIOVEC_PHYS_MERGEABLE(vec1, vec2)	\
+	((bvec_to_phys((vec1)) + (vec1)->bv_len) == bvec_to_phys((vec2)))
+
+/*
+ * allow arch override, for eg virtualized architectures (put in asm/io.h)
+ */
+#ifndef BIOVEC_PHYS_MERGEABLE
+#define BIOVEC_PHYS_MERGEABLE(vec1, vec2)	\
+	__BIOVEC_PHYS_MERGEABLE(vec1, vec2)
+#endif
+
+#define __BIO_SEG_BOUNDARY(addr1, addr2, mask) \
+	(((addr1) | (mask)) == (((addr2) - 1) | (mask)))
+#define BIOVEC_SEG_BOUNDARY(q, b1, b2) \
+	__BIO_SEG_BOUNDARY(bvec_to_phys((b1)), bvec_to_phys((b2)) + (b2)->bv_len, queue_segment_boundary((q)))
+#define BIO_SEG_BOUNDARY(q, b1, b2) \
+	BIOVEC_SEG_BOUNDARY((q), __BVEC_END((b1)), __BVEC_START((b2)))
+
+#define bio_io_error(bio) bio_endio((bio), -EIO)
+
+/*
+ * drivers should not use the __ version unless they _really_ want to
+ * run through the entire bio and not just pending pieces
+ */
+#define __bio_for_each_segment(bvl, bio, i, start_idx)			\
+	for (bvl = bio_iovec_idx((bio), (start_idx)), i = (start_idx);	\
+	     i < (bio)->bi_vcnt;					\
+	     bvl++, i++)
+
+#define bio_for_each_segment(bvl, bio, i)				\
+	__bio_for_each_segment(bvl, bio, i, (bio)->bi_idx)
+
+/*
+ * get a reference to a bio, so it won't disappear. the intended use is
+ * something like:
+ *
+ * bio_get(bio);
+ * submit_bio(rw, bio);
+ * if (bio->bi_flags ...)
+ *	do_something
+ * bio_put(bio);
+ *
+ * without the bio_get(), it could potentially complete I/O before submit_bio
+ * returns. and then bio would be freed memory when if (bio->bi_flags ...)
+ * runs
+ */
+#define bio_get(bio)	atomic_inc(&(bio)->bi_cnt)
+
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+/*
+ * bio integrity payload
+ */
+struct bio_integrity_payload {
+	struct bio		*bip_bio;	/* parent bio */
+
+	sector_t		bip_sector;	/* virtual start sector */
+
+	void			*bip_buf;	/* generated integrity data */
+	bio_end_io_t		*bip_end_io;	/* saved I/O completion fn */
+
+	unsigned int		bip_size;
+
+	unsigned short		bip_slab;	/* slab the bip came from */
+	unsigned short		bip_vcnt;	/* # of integrity bio_vecs */
+	unsigned short		bip_idx;	/* current bip_vec index */
+
+	struct work_struct	bip_work;	/* I/O completion */
+	struct bio_vec		bip_vec[0];	/* embedded bvec array */
+};
+#endif /* CONFIG_BLK_DEV_INTEGRITY */
+
+/*
+ * A bio_pair is used when we need to split a bio.
+ * This can only happen for a bio that refers to just one
+ * page of data, and in the unusual situation when the
+ * page crosses a chunk/device boundary
+ *
+ * The address of the master bio is stored in bio1.bi_private
+ * The address of the pool the pair was allocated from is stored
+ *   in bio2.bi_private
+ */
+struct bio_pair {
+	struct bio			bio1, bio2;
+	struct bio_vec			bv1, bv2;
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+	struct bio_integrity_payload	bip1, bip2;
+	struct bio_vec			iv1, iv2;
+#endif
+	atomic_t			cnt;
+	int				error;
+};
+extern struct bio_pair *bio_split(struct bio *bi, int first_sectors);
+extern void bio_pair_release(struct bio_pair *dbio);
+
+extern struct bio_set *bioset_create(unsigned int, unsigned int);
+extern void bioset_free(struct bio_set *);
+
+extern struct bio *bio_alloc(gfp_t, unsigned int);
+extern struct bio *bio_kmalloc(gfp_t, unsigned int);
+extern struct bio *bio_alloc_bioset(gfp_t, int, struct bio_set *);
+extern void bio_put(struct bio *);
+extern void bio_free(struct bio *, struct bio_set *);
+
+extern void bio_endio(struct bio *, int);
+struct request_queue;
+extern int bio_phys_segments(struct request_queue *, struct bio *);
+
+extern void __bio_clone(struct bio *, struct bio *);
+extern struct bio *bio_clone(struct bio *, gfp_t);
+
+extern void bio_init(struct bio *);
+
+extern int bio_add_page(struct bio *, struct page *, unsigned int,unsigned int);
+extern int bio_add_pc_page(struct request_queue *, struct bio *, struct page *,
+			   unsigned int, unsigned int);
+extern int bio_get_nr_vecs(struct block_device *);
+extern sector_t bio_sector_offset(struct bio *, unsigned short, unsigned int);
+extern struct bio *bio_map_user(struct request_queue *, struct block_device *,
+				unsigned long, unsigned int, int, gfp_t);
+struct sg_iovec;
+struct rq_map_data;
+extern struct bio *bio_map_user_iov(struct request_queue *,
+				    struct block_device *,
+				    struct sg_iovec *, int, int, gfp_t);
+extern void bio_unmap_user(struct bio *);
+extern struct bio *bio_map_kern(struct request_queue *, void *, unsigned int,
+				gfp_t);
+extern struct bio *bio_copy_kern(struct request_queue *, void *, unsigned int,
+				 gfp_t, int);
+extern void bio_set_pages_dirty(struct bio *bio);
+extern void bio_check_pages_dirty(struct bio *bio);
+
+#ifndef ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
+# error	"You should define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE for your platform"
+#endif
+#if ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
+extern void bio_flush_dcache_pages(struct bio *bi);
+#else
+static inline void bio_flush_dcache_pages(struct bio *bi)
+{
+}
+#endif
+
+extern struct bio *bio_copy_user(struct request_queue *, struct rq_map_data *,
+				 unsigned long, unsigned int, int, gfp_t);
+extern struct bio *bio_copy_user_iov(struct request_queue *,
+				     struct rq_map_data *, struct sg_iovec *,
+				     int, int, gfp_t);
+extern int bio_uncopy_user(struct bio *);
+void zero_fill_bio(struct bio *bio);
+extern struct bio_vec *bvec_alloc_bs(gfp_t, int, unsigned long *, struct bio_set *);
+extern void bvec_free_bs(struct bio_set *, struct bio_vec *, unsigned int);
+extern unsigned int bvec_nr_vecs(unsigned short idx);
+
+/*
+ * bio_set is used to allow other portions of the IO system to
+ * allocate their own private memory pools for bio and iovec structures.
+ * These memory pools in turn all allocate from the bio_slab
+ * and the bvec_slabs[].
+ */
+#define BIO_POOL_SIZE 2
+#define BIOVEC_NR_POOLS 6
+#define BIOVEC_MAX_IDX	(BIOVEC_NR_POOLS - 1)
+
+struct bio_set {
+	struct kmem_cache *bio_slab;
+	unsigned int front_pad;
+
+	mempool_t *bio_pool;
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+	mempool_t *bio_integrity_pool;
+#endif
+	mempool_t *bvec_pool;
+};
+
+struct biovec_slab {
+	int nr_vecs;
+	char *name;
+	struct kmem_cache *slab;
+};
+
+extern struct bio_set *fs_bio_set;
+
+/*
+ * a small number of entries is fine, not going to be performance critical.
+ * basically we just need to survive
+ */
+#define BIO_SPLIT_ENTRIES 2
+
+#ifdef CONFIG_HIGHMEM
+/*
+ * remember never ever reenable interrupts between a bvec_kmap_irq and
+ * bvec_kunmap_irq!
+ */
+static inline char *bvec_kmap_irq(struct bio_vec *bvec, unsigned long *flags)
+{
+	unsigned long addr;
+
+	/*
+	 * might not be a highmem page, but the preempt/irq count
+	 * balancing is a lot nicer this way
+	 */
+	local_irq_save(*flags);
+	addr = (unsigned long) kmap_atomic(bvec->bv_page);
+
+	BUG_ON(addr & ~PAGE_MASK);
+
+	return (char *) addr + bvec->bv_offset;
+}
+
+static inline void bvec_kunmap_irq(char *buffer, unsigned long *flags)
+{
+	unsigned long ptr = (unsigned long) buffer & PAGE_MASK;
+
+	kunmap_atomic((void *) ptr);
+	local_irq_restore(*flags);
+}
+
+#else
+static inline char *bvec_kmap_irq(struct bio_vec *bvec, unsigned long *flags)
+{
+	return page_address(bvec->bv_page) + bvec->bv_offset;
+}
+
+static inline void bvec_kunmap_irq(char *buffer, unsigned long *flags)
+{
+	*flags = 0;
+}
+#endif
+
+static inline char *__bio_kmap_irq(struct bio *bio, unsigned short idx,
+				   unsigned long *flags)
+{
+	return bvec_kmap_irq(bio_iovec_idx(bio, idx), flags);
+}
+#define __bio_kunmap_irq(buf, flags)	bvec_kunmap_irq(buf, flags)
+
+#define bio_kmap_irq(bio, flags) \
+	__bio_kmap_irq((bio), (bio)->bi_idx, (flags))
+#define bio_kunmap_irq(buf,flags)	__bio_kunmap_irq(buf, flags)
+
+/*
+ * Check whether this bio carries any data or not. A NULL bio is allowed.
+ */
+static inline int bio_has_data(struct bio *bio)
+{
+	return bio && bio->bi_io_vec != NULL;
+}
+
+/*
+ * BIO list management for use by remapping drivers (e.g. DM or MD) and loop.
+ *
+ * A bio_list anchors a singly-linked list of bios chained through the bi_next
+ * member of the bio.  The bio_list also caches the last list member to allow
+ * fast access to the tail.
+ */
+struct bio_list {
+	struct bio *head;
+	struct bio *tail;
+};
+
+static inline int bio_list_empty(const struct bio_list *bl)
+{
+	return bl->head == NULL;
+}
+
+static inline void bio_list_init(struct bio_list *bl)
+{
+	bl->head = bl->tail = NULL;
+}
+
+#define bio_list_for_each(bio, bl) \
+	for (bio = (bl)->head; bio; bio = bio->bi_next)
+
+static inline unsigned bio_list_size(const struct bio_list *bl)
+{
+	unsigned sz = 0;
+	struct bio *bio;
+
+	bio_list_for_each(bio, bl)
+		sz++;
+
+	return sz;
+}
+
+static inline void bio_list_add(struct bio_list *bl, struct bio *bio)
+{
+	bio->bi_next = NULL;
+
+	if (bl->tail)
+		bl->tail->bi_next = bio;
+	else
+		bl->head = bio;
+
+	bl->tail = bio;
+}
+
+static inline void bio_list_add_head(struct bio_list *bl, struct bio *bio)
+{
+	bio->bi_next = bl->head;
+
+	bl->head = bio;
+
+	if (!bl->tail)
+		bl->tail = bio;
+}
+
+static inline void bio_list_merge(struct bio_list *bl, struct bio_list *bl2)
+{
+	if (!bl2->head)
+		return;
+
+	if (bl->tail)
+		bl->tail->bi_next = bl2->head;
+	else
+		bl->head = bl2->head;
+
+	bl->tail = bl2->tail;
+}
+
+static inline void bio_list_merge_head(struct bio_list *bl,
+				       struct bio_list *bl2)
+{
+	if (!bl2->head)
+		return;
+
+	if (bl->head)
+		bl2->tail->bi_next = bl->head;
+	else
+		bl->tail = bl2->tail;
+
+	bl->head = bl2->head;
+}
+
+static inline struct bio *bio_list_peek(struct bio_list *bl)
+{
+	return bl->head;
+}
+
+static inline struct bio *bio_list_pop(struct bio_list *bl)
+{
+	struct bio *bio = bl->head;
+
+	if (bio) {
+		bl->head = bl->head->bi_next;
+		if (!bl->head)
+			bl->tail = NULL;
+
+		bio->bi_next = NULL;
+	}
+
+	return bio;
+}
+
+static inline struct bio *bio_list_get(struct bio_list *bl)
+{
+	struct bio *bio = bl->head;
+
+	bl->head = bl->tail = NULL;
+
+	return bio;
+}
+
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+
+#define bip_vec_idx(bip, idx)	(&(bip->bip_vec[(idx)]))
+#define bip_vec(bip)		bip_vec_idx(bip, 0)
+
+#define __bip_for_each_vec(bvl, bip, i, start_idx)			\
+	for (bvl = bip_vec_idx((bip), (start_idx)), i = (start_idx);	\
+	     i < (bip)->bip_vcnt;					\
+	     bvl++, i++)
+
+#define bip_for_each_vec(bvl, bip, i)					\
+	__bip_for_each_vec(bvl, bip, i, (bip)->bip_idx)
+
+#define bio_for_each_integrity_vec(_bvl, _bio, _iter)			\
+	for_each_bio(_bio)						\
+		bip_for_each_vec(_bvl, _bio->bi_integrity, _iter)
+
+#define bio_integrity(bio) (bio->bi_integrity != NULL)
+
+extern struct bio_integrity_payload *bio_integrity_alloc_bioset(struct bio *, gfp_t, unsigned int, struct bio_set *);
+extern struct bio_integrity_payload *bio_integrity_alloc(struct bio *, gfp_t, unsigned int);
+extern void bio_integrity_free(struct bio *, struct bio_set *);
+extern int bio_integrity_add_page(struct bio *, struct page *, unsigned int, unsigned int);
+extern int bio_integrity_enabled(struct bio *bio);
+extern int bio_integrity_set_tag(struct bio *, void *, unsigned int);
+extern int bio_integrity_get_tag(struct bio *, void *, unsigned int);
+extern int bio_integrity_prep(struct bio *);
+extern void bio_integrity_endio(struct bio *, int);
+extern void bio_integrity_advance(struct bio *, unsigned int);
+extern void bio_integrity_trim(struct bio *, unsigned int, unsigned int);
+extern void bio_integrity_split(struct bio *, struct bio_pair *, int);
+extern int bio_integrity_clone(struct bio *, struct bio *, gfp_t, struct bio_set *);
+extern int bioset_integrity_create(struct bio_set *, int);
+extern void bioset_integrity_free(struct bio_set *);
+extern void bio_integrity_init(void);
+
+#else /* CONFIG_BLK_DEV_INTEGRITY */
+
+static inline int bio_integrity(struct bio *bio)
+{
+	return 0;
+}
+
+static inline int bio_integrity_enabled(struct bio *bio)
+{
+	return 0;
+}
+
+static inline int bioset_integrity_create(struct bio_set *bs, int pool_size)
+{
+	return 0;
+}
+
+static inline void bioset_integrity_free (struct bio_set *bs)
+{
+	return;
+}
+
+static inline int bio_integrity_prep(struct bio *bio)
+{
+	return 0;
+}
+
+static inline void bio_integrity_free(struct bio *bio, struct bio_set *bs)
+{
+	return;
+}
+
+static inline int bio_integrity_clone(struct bio *bio, struct bio *bio_src,
+				      gfp_t gfp_mask, struct bio_set *bs)
+{
+	return 0;
+}
+
+static inline void bio_integrity_split(struct bio *bio, struct bio_pair *bp,
+				       int sectors)
+{
+	return;
+}
+
+static inline void bio_integrity_advance(struct bio *bio,
+					 unsigned int bytes_done)
+{
+	return;
+}
+
+static inline void bio_integrity_trim(struct bio *bio, unsigned int offset,
+				      unsigned int sectors)
+{
+	return;
+}
+
+static inline void bio_integrity_init(void)
+{
+	return;
+}
+
+#endif /* CONFIG_BLK_DEV_INTEGRITY */
+
+#endif /* CONFIG_BLOCK */
+#endif /* __LINUX_BIO_H */
diff --git a/include/linux/bit_spinlock.h b/include/linux/bit_spinlock.h
new file mode 100644
index 00000000..3b5bafce
--- /dev/null
+++ b/include/linux/bit_spinlock.h
@@ -0,0 +1,100 @@
+#ifndef __LINUX_BIT_SPINLOCK_H
+#define __LINUX_BIT_SPINLOCK_H
+
+#include <linux/kernel.h>
+#include <linux/preempt.h>
+#include <linux/atomic.h>
+#include <linux/bug.h>
+
+/*
+ *  bit-based spin_lock()
+ *
+ * Don't use this unless you really need to: spin_lock() and spin_unlock()
+ * are significantly faster.
+ */
+static inline void bit_spin_lock(int bitnum, unsigned long *addr)
+{
+	/*
+	 * Assuming the lock is uncontended, this never enters
+	 * the body of the outer loop. If it is contended, then
+	 * within the inner loop a non-atomic test is used to
+	 * busywait with less bus contention for a good time to
+	 * attempt to acquire the lock bit.
+	 */
+	preempt_disable();
+#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
+	while (unlikely(test_and_set_bit_lock(bitnum, addr))) {
+		preempt_enable();
+		do {
+			cpu_relax();
+		} while (test_bit(bitnum, addr));
+		preempt_disable();
+	}
+#endif
+	__acquire(bitlock);
+}
+
+/*
+ * Return true if it was acquired
+ */
+static inline int bit_spin_trylock(int bitnum, unsigned long *addr)
+{
+	preempt_disable();
+#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
+	if (unlikely(test_and_set_bit_lock(bitnum, addr))) {
+		preempt_enable();
+		return 0;
+	}
+#endif
+	__acquire(bitlock);
+	return 1;
+}
+
+/*
+ *  bit-based spin_unlock()
+ */
+static inline void bit_spin_unlock(int bitnum, unsigned long *addr)
+{
+#ifdef CONFIG_DEBUG_SPINLOCK
+	BUG_ON(!test_bit(bitnum, addr));
+#endif
+#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
+	clear_bit_unlock(bitnum, addr);
+#endif
+	preempt_enable();
+	__release(bitlock);
+}
+
+/*
+ *  bit-based spin_unlock()
+ *  non-atomic version, which can be used eg. if the bit lock itself is
+ *  protecting the rest of the flags in the word.
+ */
+static inline void __bit_spin_unlock(int bitnum, unsigned long *addr)
+{
+#ifdef CONFIG_DEBUG_SPINLOCK
+	BUG_ON(!test_bit(bitnum, addr));
+#endif
+#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
+	__clear_bit_unlock(bitnum, addr);
+#endif
+	preempt_enable();
+	__release(bitlock);
+}
+
+/*
+ * Return true if the lock is held.
+ */
+static inline int bit_spin_is_locked(int bitnum, unsigned long *addr)
+{
+#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
+	return test_bit(bitnum, addr);
+#elif defined CONFIG_PREEMPT_COUNT
+	return preempt_count();
+#else
+	return 1;
+#endif
+}
+
+#endif /* __LINUX_BIT_SPINLOCK_H */
+
diff --git a/include/linux/bitmap.h b/include/linux/bitmap.h
new file mode 100644
index 00000000..7ad63450
--- /dev/null
+++ b/include/linux/bitmap.h
@@ -0,0 +1,309 @@
+#ifndef __LINUX_BITMAP_H
+#define __LINUX_BITMAP_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <linux/bitops.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+/*
+ * bitmaps provide bit arrays that consume one or more unsigned
+ * longs.  The bitmap interface and available operations are listed
+ * here, in bitmap.h
+ *
+ * Function implementations generic to all architectures are in
+ * lib/bitmap.c.  Functions implementations that are architecture
+ * specific are in various include/asm-<arch>/bitops.h headers
+ * and other arch/<arch> specific files.
+ *
+ * See lib/bitmap.c for more details.
+ */
+
+/*
+ * The available bitmap operations and their rough meaning in the
+ * case that the bitmap is a single unsigned long are thus:
+ *
+ * Note that nbits should be always a compile time evaluable constant.
+ * Otherwise many inlines will generate horrible code.
+ *
+ * bitmap_zero(dst, nbits)			*dst = 0UL
+ * bitmap_fill(dst, nbits)			*dst = ~0UL
+ * bitmap_copy(dst, src, nbits)			*dst = *src
+ * bitmap_and(dst, src1, src2, nbits)		*dst = *src1 & *src2
+ * bitmap_or(dst, src1, src2, nbits)		*dst = *src1 | *src2
+ * bitmap_xor(dst, src1, src2, nbits)		*dst = *src1 ^ *src2
+ * bitmap_andnot(dst, src1, src2, nbits)	*dst = *src1 & ~(*src2)
+ * bitmap_complement(dst, src, nbits)		*dst = ~(*src)
+ * bitmap_equal(src1, src2, nbits)		Are *src1 and *src2 equal?
+ * bitmap_intersects(src1, src2, nbits) 	Do *src1 and *src2 overlap?
+ * bitmap_subset(src1, src2, nbits)		Is *src1 a subset of *src2?
+ * bitmap_empty(src, nbits)			Are all bits zero in *src?
+ * bitmap_full(src, nbits)			Are all bits set in *src?
+ * bitmap_weight(src, nbits)			Hamming Weight: number set bits
+ * bitmap_set(dst, pos, nbits)			Set specified bit area
+ * bitmap_clear(dst, pos, nbits)		Clear specified bit area
+ * bitmap_find_next_zero_area(buf, len, pos, n, mask)	Find bit free area
+ * bitmap_shift_right(dst, src, n, nbits)	*dst = *src >> n
+ * bitmap_shift_left(dst, src, n, nbits)	*dst = *src << n
+ * bitmap_remap(dst, src, old, new, nbits)	*dst = map(old, new)(src)
+ * bitmap_bitremap(oldbit, old, new, nbits)	newbit = map(old, new)(oldbit)
+ * bitmap_onto(dst, orig, relmap, nbits)	*dst = orig relative to relmap
+ * bitmap_fold(dst, orig, sz, nbits)		dst bits = orig bits mod sz
+ * bitmap_scnprintf(buf, len, src, nbits)	Print bitmap src to buf
+ * bitmap_parse(buf, buflen, dst, nbits)	Parse bitmap dst from kernel buf
+ * bitmap_parse_user(ubuf, ulen, dst, nbits)	Parse bitmap dst from user buf
+ * bitmap_scnlistprintf(buf, len, src, nbits)	Print bitmap src as list to buf
+ * bitmap_parselist(buf, dst, nbits)		Parse bitmap dst from kernel buf
+ * bitmap_parselist_user(buf, dst, nbits)	Parse bitmap dst from user buf
+ * bitmap_find_free_region(bitmap, bits, order)	Find and allocate bit region
+ * bitmap_release_region(bitmap, pos, order)	Free specified bit region
+ * bitmap_allocate_region(bitmap, pos, order)	Allocate specified bit region
+ */
+
+/*
+ * Also the following operations in asm/bitops.h apply to bitmaps.
+ *
+ * set_bit(bit, addr)			*addr |= bit
+ * clear_bit(bit, addr)			*addr &= ~bit
+ * change_bit(bit, addr)		*addr ^= bit
+ * test_bit(bit, addr)			Is bit set in *addr?
+ * test_and_set_bit(bit, addr)		Set bit and return old value
+ * test_and_clear_bit(bit, addr)	Clear bit and return old value
+ * test_and_change_bit(bit, addr)	Change bit and return old value
+ * find_first_zero_bit(addr, nbits)	Position first zero bit in *addr
+ * find_first_bit(addr, nbits)		Position first set bit in *addr
+ * find_next_zero_bit(addr, nbits, bit)	Position next zero bit in *addr >= bit
+ * find_next_bit(addr, nbits, bit)	Position next set bit in *addr >= bit
+ */
+
+/*
+ * The DECLARE_BITMAP(name,bits) macro, in linux/types.h, can be used
+ * to declare an array named 'name' of just enough unsigned longs to
+ * contain all bit positions from 0 to 'bits' - 1.
+ */
+
+/*
+ * lib/bitmap.c provides these functions:
+ */
+
+extern int __bitmap_empty(const unsigned long *bitmap, int bits);
+extern int __bitmap_full(const unsigned long *bitmap, int bits);
+extern int __bitmap_equal(const unsigned long *bitmap1,
+                	const unsigned long *bitmap2, int bits);
+extern void __bitmap_complement(unsigned long *dst, const unsigned long *src,
+			int bits);
+extern void __bitmap_shift_right(unsigned long *dst,
+                        const unsigned long *src, int shift, int bits);
+extern void __bitmap_shift_left(unsigned long *dst,
+                        const unsigned long *src, int shift, int bits);
+extern int __bitmap_and(unsigned long *dst, const unsigned long *bitmap1,
+			const unsigned long *bitmap2, int bits);
+extern void __bitmap_or(unsigned long *dst, const unsigned long *bitmap1,
+			const unsigned long *bitmap2, int bits);
+extern void __bitmap_xor(unsigned long *dst, const unsigned long *bitmap1,
+			const unsigned long *bitmap2, int bits);
+extern int __bitmap_andnot(unsigned long *dst, const unsigned long *bitmap1,
+			const unsigned long *bitmap2, int bits);
+extern int __bitmap_intersects(const unsigned long *bitmap1,
+			const unsigned long *bitmap2, int bits);
+extern int __bitmap_subset(const unsigned long *bitmap1,
+			const unsigned long *bitmap2, int bits);
+extern int __bitmap_weight(const unsigned long *bitmap, int bits);
+
+extern void bitmap_set(unsigned long *map, int i, int len);
+extern void bitmap_clear(unsigned long *map, int start, int nr);
+extern unsigned long bitmap_find_next_zero_area(unsigned long *map,
+					 unsigned long size,
+					 unsigned long start,
+					 unsigned int nr,
+					 unsigned long align_mask);
+
+extern int bitmap_scnprintf(char *buf, unsigned int len,
+			const unsigned long *src, int nbits);
+extern int __bitmap_parse(const char *buf, unsigned int buflen, int is_user,
+			unsigned long *dst, int nbits);
+extern int bitmap_parse_user(const char __user *ubuf, unsigned int ulen,
+			unsigned long *dst, int nbits);
+extern int bitmap_scnlistprintf(char *buf, unsigned int len,
+			const unsigned long *src, int nbits);
+extern int bitmap_parselist(const char *buf, unsigned long *maskp,
+			int nmaskbits);
+extern int bitmap_parselist_user(const char __user *ubuf, unsigned int ulen,
+			unsigned long *dst, int nbits);
+extern void bitmap_remap(unsigned long *dst, const unsigned long *src,
+		const unsigned long *old, const unsigned long *new, int bits);
+extern int bitmap_bitremap(int oldbit,
+		const unsigned long *old, const unsigned long *new, int bits);
+extern void bitmap_onto(unsigned long *dst, const unsigned long *orig,
+		const unsigned long *relmap, int bits);
+extern void bitmap_fold(unsigned long *dst, const unsigned long *orig,
+		int sz, int bits);
+extern int bitmap_find_free_region(unsigned long *bitmap, int bits, int order);
+extern void bitmap_release_region(unsigned long *bitmap, int pos, int order);
+extern int bitmap_allocate_region(unsigned long *bitmap, int pos, int order);
+extern void bitmap_copy_le(void *dst, const unsigned long *src, int nbits);
+extern int bitmap_ord_to_pos(const unsigned long *bitmap, int n, int bits);
+
+#define BITMAP_FIRST_WORD_MASK(start) (~0UL << ((start) % BITS_PER_LONG))
+#define BITMAP_LAST_WORD_MASK(nbits)					\
+(									\
+	((nbits) % BITS_PER_LONG) ?					\
+		(1UL<<((nbits) % BITS_PER_LONG))-1 : ~0UL		\
+)
+
+#define small_const_nbits(nbits) \
+	(__builtin_constant_p(nbits) && (nbits) <= BITS_PER_LONG)
+
+static inline void bitmap_zero(unsigned long *dst, int nbits)
+{
+	if (small_const_nbits(nbits))
+		*dst = 0UL;
+	else {
+		int len = BITS_TO_LONGS(nbits) * sizeof(unsigned long);
+		memset(dst, 0, len);
+	}
+}
+
+static inline void bitmap_fill(unsigned long *dst, int nbits)
+{
+	size_t nlongs = BITS_TO_LONGS(nbits);
+	if (!small_const_nbits(nbits)) {
+		int len = (nlongs - 1) * sizeof(unsigned long);
+		memset(dst, 0xff,  len);
+	}
+	dst[nlongs - 1] = BITMAP_LAST_WORD_MASK(nbits);
+}
+
+static inline void bitmap_copy(unsigned long *dst, const unsigned long *src,
+			int nbits)
+{
+	if (small_const_nbits(nbits))
+		*dst = *src;
+	else {
+		int len = BITS_TO_LONGS(nbits) * sizeof(unsigned long);
+		memcpy(dst, src, len);
+	}
+}
+
+static inline int bitmap_and(unsigned long *dst, const unsigned long *src1,
+			const unsigned long *src2, int nbits)
+{
+	if (small_const_nbits(nbits))
+		return (*dst = *src1 & *src2) != 0;
+	return __bitmap_and(dst, src1, src2, nbits);
+}
+
+static inline void bitmap_or(unsigned long *dst, const unsigned long *src1,
+			const unsigned long *src2, int nbits)
+{
+	if (small_const_nbits(nbits))
+		*dst = *src1 | *src2;
+	else
+		__bitmap_or(dst, src1, src2, nbits);
+}
+
+static inline void bitmap_xor(unsigned long *dst, const unsigned long *src1,
+			const unsigned long *src2, int nbits)
+{
+	if (small_const_nbits(nbits))
+		*dst = *src1 ^ *src2;
+	else
+		__bitmap_xor(dst, src1, src2, nbits);
+}
+
+static inline int bitmap_andnot(unsigned long *dst, const unsigned long *src1,
+			const unsigned long *src2, int nbits)
+{
+	if (small_const_nbits(nbits))
+		return (*dst = *src1 & ~(*src2)) != 0;
+	return __bitmap_andnot(dst, src1, src2, nbits);
+}
+
+static inline void bitmap_complement(unsigned long *dst, const unsigned long *src,
+			int nbits)
+{
+	if (small_const_nbits(nbits))
+		*dst = ~(*src) & BITMAP_LAST_WORD_MASK(nbits);
+	else
+		__bitmap_complement(dst, src, nbits);
+}
+
+static inline int bitmap_equal(const unsigned long *src1,
+			const unsigned long *src2, int nbits)
+{
+	if (small_const_nbits(nbits))
+		return ! ((*src1 ^ *src2) & BITMAP_LAST_WORD_MASK(nbits));
+	else
+		return __bitmap_equal(src1, src2, nbits);
+}
+
+static inline int bitmap_intersects(const unsigned long *src1,
+			const unsigned long *src2, int nbits)
+{
+	if (small_const_nbits(nbits))
+		return ((*src1 & *src2) & BITMAP_LAST_WORD_MASK(nbits)) != 0;
+	else
+		return __bitmap_intersects(src1, src2, nbits);
+}
+
+static inline int bitmap_subset(const unsigned long *src1,
+			const unsigned long *src2, int nbits)
+{
+	if (small_const_nbits(nbits))
+		return ! ((*src1 & ~(*src2)) & BITMAP_LAST_WORD_MASK(nbits));
+	else
+		return __bitmap_subset(src1, src2, nbits);
+}
+
+static inline int bitmap_empty(const unsigned long *src, int nbits)
+{
+	if (small_const_nbits(nbits))
+		return ! (*src & BITMAP_LAST_WORD_MASK(nbits));
+	else
+		return __bitmap_empty(src, nbits);
+}
+
+static inline int bitmap_full(const unsigned long *src, int nbits)
+{
+	if (small_const_nbits(nbits))
+		return ! (~(*src) & BITMAP_LAST_WORD_MASK(nbits));
+	else
+		return __bitmap_full(src, nbits);
+}
+
+static inline int bitmap_weight(const unsigned long *src, int nbits)
+{
+	if (small_const_nbits(nbits))
+		return hweight_long(*src & BITMAP_LAST_WORD_MASK(nbits));
+	return __bitmap_weight(src, nbits);
+}
+
+static inline void bitmap_shift_right(unsigned long *dst,
+			const unsigned long *src, int n, int nbits)
+{
+	if (small_const_nbits(nbits))
+		*dst = *src >> n;
+	else
+		__bitmap_shift_right(dst, src, n, nbits);
+}
+
+static inline void bitmap_shift_left(unsigned long *dst,
+			const unsigned long *src, int n, int nbits)
+{
+	if (small_const_nbits(nbits))
+		*dst = (*src << n) & BITMAP_LAST_WORD_MASK(nbits);
+	else
+		__bitmap_shift_left(dst, src, n, nbits);
+}
+
+static inline int bitmap_parse(const char *buf, unsigned int buflen,
+			unsigned long *maskp, int nmaskbits)
+{
+	return __bitmap_parse(buf, buflen, 0, maskp, nmaskbits);
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __LINUX_BITMAP_H */
diff --git a/include/linux/bitops.h b/include/linux/bitops.h
new file mode 100644
index 00000000..a3b6b821
--- /dev/null
+++ b/include/linux/bitops.h
@@ -0,0 +1,201 @@
+#ifndef _LINUX_BITOPS_H
+#define _LINUX_BITOPS_H
+#include <asm/types.h>
+
+#ifdef	__KERNEL__
+#define BIT(nr)			(1UL << (nr))
+#define BIT_MASK(nr)		(1UL << ((nr) % BITS_PER_LONG))
+#define BIT_WORD(nr)		((nr) / BITS_PER_LONG)
+#define BITS_PER_BYTE		8
+#define BITS_TO_LONGS(nr)	DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(long))
+#endif
+
+extern unsigned int __sw_hweight8(unsigned int w);
+extern unsigned int __sw_hweight16(unsigned int w);
+extern unsigned int __sw_hweight32(unsigned int w);
+extern unsigned long __sw_hweight64(__u64 w);
+
+/*
+ * Include this here because some architectures need generic_ffs/fls in
+ * scope
+ */
+#include <asm/bitops.h>
+
+#define for_each_set_bit(bit, addr, size) \
+	for ((bit) = find_first_bit((addr), (size));		\
+	     (bit) < (size);					\
+	     (bit) = find_next_bit((addr), (size), (bit) + 1))
+
+/* same as for_each_set_bit() but use bit as value to start with */
+#define for_each_set_bit_from(bit, addr, size) \
+	for ((bit) = find_next_bit((addr), (size), (bit));	\
+	     (bit) < (size);					\
+	     (bit) = find_next_bit((addr), (size), (bit) + 1))
+
+#define for_each_clear_bit(bit, addr, size) \
+	for ((bit) = find_first_zero_bit((addr), (size));	\
+	     (bit) < (size);					\
+	     (bit) = find_next_zero_bit((addr), (size), (bit) + 1))
+
+/* same as for_each_clear_bit() but use bit as value to start with */
+#define for_each_clear_bit_from(bit, addr, size) \
+	for ((bit) = find_next_zero_bit((addr), (size), (bit));	\
+	     (bit) < (size);					\
+	     (bit) = find_next_zero_bit((addr), (size), (bit) + 1))
+
+static __inline__ int get_bitmask_order(unsigned int count)
+{
+	int order;
+
+	order = fls(count);
+	return order;	/* We could be slightly more clever with -1 here... */
+}
+
+static __inline__ int get_count_order(unsigned int count)
+{
+	int order;
+
+	order = fls(count) - 1;
+	if (count & (count - 1))
+		order++;
+	return order;
+}
+
+static inline unsigned long hweight_long(unsigned long w)
+{
+	return sizeof(w) == 4 ? hweight32(w) : hweight64(w);
+}
+
+/**
+ * rol64 - rotate a 64-bit value left
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u64 rol64(__u64 word, unsigned int shift)
+{
+	return (word << shift) | (word >> (64 - shift));
+}
+
+/**
+ * ror64 - rotate a 64-bit value right
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u64 ror64(__u64 word, unsigned int shift)
+{
+	return (word >> shift) | (word << (64 - shift));
+}
+
+/**
+ * rol32 - rotate a 32-bit value left
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u32 rol32(__u32 word, unsigned int shift)
+{
+	return (word << shift) | (word >> (32 - shift));
+}
+
+/**
+ * ror32 - rotate a 32-bit value right
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u32 ror32(__u32 word, unsigned int shift)
+{
+	return (word >> shift) | (word << (32 - shift));
+}
+
+/**
+ * rol16 - rotate a 16-bit value left
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u16 rol16(__u16 word, unsigned int shift)
+{
+	return (word << shift) | (word >> (16 - shift));
+}
+
+/**
+ * ror16 - rotate a 16-bit value right
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u16 ror16(__u16 word, unsigned int shift)
+{
+	return (word >> shift) | (word << (16 - shift));
+}
+
+/**
+ * rol8 - rotate an 8-bit value left
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u8 rol8(__u8 word, unsigned int shift)
+{
+	return (word << shift) | (word >> (8 - shift));
+}
+
+/**
+ * ror8 - rotate an 8-bit value right
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u8 ror8(__u8 word, unsigned int shift)
+{
+	return (word >> shift) | (word << (8 - shift));
+}
+
+/**
+ * sign_extend32 - sign extend a 32-bit value using specified bit as sign-bit
+ * @value: value to sign extend
+ * @index: 0 based bit index (0<=index<32) to sign bit
+ */
+static inline __s32 sign_extend32(__u32 value, int index)
+{
+	__u8 shift = 31 - index;
+	return (__s32)(value << shift) >> shift;
+}
+
+static inline unsigned fls_long(unsigned long l)
+{
+	if (sizeof(l) == 4)
+		return fls(l);
+	return fls64(l);
+}
+
+/**
+ * __ffs64 - find first set bit in a 64 bit word
+ * @word: The 64 bit word
+ *
+ * On 64 bit arches this is a synomyn for __ffs
+ * The result is not defined if no bits are set, so check that @word
+ * is non-zero before calling this.
+ */
+static inline unsigned long __ffs64(u64 word)
+{
+#if BITS_PER_LONG == 32
+	if (((u32)word) == 0UL)
+		return __ffs((u32)(word >> 32)) + 32;
+#elif BITS_PER_LONG != 64
+#error BITS_PER_LONG not 32 or 64
+#endif
+	return __ffs((unsigned long)word);
+}
+
+#ifdef __KERNEL__
+
+#ifndef find_last_bit
+/**
+ * find_last_bit - find the last set bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit number of the first set bit, or size.
+ */
+extern unsigned long find_last_bit(const unsigned long *addr,
+				   unsigned long size);
+#endif
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/include/linux/bitrev.h b/include/linux/bitrev.h
new file mode 100644
index 00000000..7ffe03f4
--- /dev/null
+++ b/include/linux/bitrev.h
@@ -0,0 +1,16 @@
+#ifndef _LINUX_BITREV_H
+#define _LINUX_BITREV_H
+
+#include <linux/types.h>
+
+extern u8 const byte_rev_table[256];
+
+static inline u8 bitrev8(u8 byte)
+{
+	return byte_rev_table[byte];
+}
+
+extern u16 bitrev16(u16 in);
+extern u32 bitrev32(u32 in);
+
+#endif /* _LINUX_BITREV_H */
diff --git a/include/linux/blk-iopoll.h b/include/linux/blk-iopoll.h
new file mode 100644
index 00000000..308734d3
--- /dev/null
+++ b/include/linux/blk-iopoll.h
@@ -0,0 +1,48 @@
+#ifndef BLK_IOPOLL_H
+#define BLK_IOPOLL_H
+
+struct blk_iopoll;
+typedef int (blk_iopoll_fn)(struct blk_iopoll *, int);
+
+struct blk_iopoll {
+	struct list_head list;
+	unsigned long state;
+	unsigned long data;
+	int weight;
+	int max;
+	blk_iopoll_fn *poll;
+};
+
+enum {
+	IOPOLL_F_SCHED		= 0,
+	IOPOLL_F_DISABLE	= 1,
+};
+
+/*
+ * Returns 0 if we successfully set the IOPOLL_F_SCHED bit, indicating
+ * that we were the first to acquire this iop for scheduling. If this iop
+ * is currently disabled, return "failure".
+ */
+static inline int blk_iopoll_sched_prep(struct blk_iopoll *iop)
+{
+	if (!test_bit(IOPOLL_F_DISABLE, &iop->state))
+		return test_and_set_bit(IOPOLL_F_SCHED, &iop->state);
+
+	return 1;
+}
+
+static inline int blk_iopoll_disable_pending(struct blk_iopoll *iop)
+{
+	return test_bit(IOPOLL_F_DISABLE, &iop->state);
+}
+
+extern void blk_iopoll_sched(struct blk_iopoll *);
+extern void blk_iopoll_init(struct blk_iopoll *, int, blk_iopoll_fn *);
+extern void blk_iopoll_complete(struct blk_iopoll *);
+extern void __blk_iopoll_complete(struct blk_iopoll *);
+extern void blk_iopoll_enable(struct blk_iopoll *);
+extern void blk_iopoll_disable(struct blk_iopoll *);
+
+extern int blk_iopoll_enabled;
+
+#endif
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
new file mode 100644
index 00000000..4053cbd4
--- /dev/null
+++ b/include/linux/blk_types.h
@@ -0,0 +1,195 @@
+/*
+ * Block data types and constants.  Directly include this file only to
+ * break include dependency loop.
+ */
+#ifndef __LINUX_BLK_TYPES_H
+#define __LINUX_BLK_TYPES_H
+
+#ifdef CONFIG_BLOCK
+
+#include <linux/types.h>
+
+struct bio_set;
+struct bio;
+struct bio_integrity_payload;
+struct page;
+struct block_device;
+typedef void (bio_end_io_t) (struct bio *, int);
+typedef void (bio_destructor_t) (struct bio *);
+
+/*
+ * was unsigned short, but we might as well be ready for > 64kB I/O pages
+ */
+struct bio_vec {
+	struct page	*bv_page;
+	unsigned int	bv_len;
+	unsigned int	bv_offset;
+};
+
+/*
+ * main unit of I/O for the block layer and lower layers (ie drivers and
+ * stacking drivers)
+ */
+struct bio {
+	sector_t		bi_sector;	/* device address in 512 byte
+						   sectors */
+	struct bio		*bi_next;	/* request queue link */
+	struct block_device	*bi_bdev;
+	unsigned long		bi_flags;	/* status, command, etc */
+	unsigned long		bi_rw;		/* bottom bits READ/WRITE,
+						 * top bits priority
+						 */
+
+	unsigned short		bi_vcnt;	/* how many bio_vec's */
+	unsigned short		bi_idx;		/* current index into bvl_vec */
+
+	/* Number of segments in this BIO after
+	 * physical address coalescing is performed.
+	 */
+	unsigned int		bi_phys_segments;
+
+	unsigned int		bi_size;	/* residual I/O count */
+
+	/*
+	 * To keep track of the max segment size, we account for the
+	 * sizes of the first and last mergeable segments in this bio.
+	 */
+	unsigned int		bi_seg_front_size;
+	unsigned int		bi_seg_back_size;
+
+	unsigned int		bi_max_vecs;	/* max bvl_vecs we can hold */
+
+	atomic_t		bi_cnt;		/* pin count */
+
+	struct bio_vec		*bi_io_vec;	/* the actual vec list */
+
+	bio_end_io_t		*bi_end_io;
+
+	void			*bi_private;
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+	struct bio_integrity_payload *bi_integrity;  /* data integrity */
+#endif
+
+	bio_destructor_t	*bi_destructor;	/* destructor */
+
+	/*
+	 * We can inline a number of vecs at the end of the bio, to avoid
+	 * double allocations for a small number of bio_vecs. This member
+	 * MUST obviously be kept at the very end of the bio.
+	 */
+	struct bio_vec		bi_inline_vecs[0];
+};
+
+/*
+ * bio flags
+ */
+#define BIO_UPTODATE	0	/* ok after I/O completion */
+#define BIO_RW_BLOCK	1	/* RW_AHEAD set, and read/write would block */
+#define BIO_EOF		2	/* out-out-bounds error */
+#define BIO_SEG_VALID	3	/* bi_phys_segments valid */
+#define BIO_CLONED	4	/* doesn't own data */
+#define BIO_BOUNCED	5	/* bio is a bounce bio */
+#define BIO_USER_MAPPED 6	/* contains user pages */
+#define BIO_EOPNOTSUPP	7	/* not supported */
+#define BIO_NULL_MAPPED 8	/* contains invalid user pages */
+#define BIO_FS_INTEGRITY 9	/* fs owns integrity data, not block layer */
+#define BIO_QUIET	10	/* Make BIO Quiet */
+#define BIO_MAPPED_INTEGRITY 11/* integrity metadata has been remapped */
+#define bio_flagged(bio, flag)	((bio)->bi_flags & (1 << (flag)))
+
+/*
+ * top 4 bits of bio flags indicate the pool this bio came from
+ */
+#define BIO_POOL_BITS		(4)
+#define BIO_POOL_NONE		((1UL << BIO_POOL_BITS) - 1)
+#define BIO_POOL_OFFSET		(BITS_PER_LONG - BIO_POOL_BITS)
+#define BIO_POOL_MASK		(1UL << BIO_POOL_OFFSET)
+#define BIO_POOL_IDX(bio)	((bio)->bi_flags >> BIO_POOL_OFFSET)
+
+#endif /* CONFIG_BLOCK */
+
+/*
+ * Request flags.  For use in the cmd_flags field of struct request, and in
+ * bi_rw of struct bio.  Note that some flags are only valid in either one.
+ */
+enum rq_flag_bits {
+	/* common flags */
+	__REQ_WRITE,		/* not set, read. set, write */
+	__REQ_FAILFAST_DEV,	/* no driver retries of device errors */
+	__REQ_FAILFAST_TRANSPORT, /* no driver retries of transport errors */
+	__REQ_FAILFAST_DRIVER,	/* no driver retries of driver errors */
+
+	__REQ_SYNC,		/* request is sync (sync write or read) */
+	__REQ_META,		/* metadata io request */
+	__REQ_PRIO,		/* boost priority in cfq */
+	__REQ_DISCARD,		/* request to discard sectors */
+	__REQ_SECURE,		/* secure discard (used with __REQ_DISCARD) */
+
+	__REQ_NOIDLE,		/* don't anticipate more IO after this one */
+	__REQ_FUA,		/* forced unit access */
+	__REQ_FLUSH,		/* request for cache flush */
+
+	/* bio only flags */
+	__REQ_RAHEAD,		/* read ahead, can fail anytime */
+	__REQ_THROTTLED,	/* This bio has already been subjected to
+				 * throttling rules. Don't do it again. */
+
+	/* request only flags */
+	__REQ_SORTED,		/* elevator knows about this request */
+	__REQ_SOFTBARRIER,	/* may not be passed by ioscheduler */
+	__REQ_NOMERGE,		/* don't touch this for merging */
+	__REQ_STARTED,		/* drive already may have started this one */
+	__REQ_DONTPREP,		/* don't call prep for this one */
+	__REQ_QUEUED,		/* uses queueing */
+	__REQ_ELVPRIV,		/* elevator private data attached */
+	__REQ_FAILED,		/* set if the request failed */
+	__REQ_QUIET,		/* don't worry about errors */
+	__REQ_PREEMPT,		/* set for "ide_preempt" requests */
+	__REQ_ALLOCED,		/* request came from our alloc pool */
+	__REQ_COPY_USER,	/* contains copies of user pages */
+	__REQ_FLUSH_SEQ,	/* request for flush sequence */
+	__REQ_IO_STAT,		/* account I/O stat */
+	__REQ_MIXED_MERGE,	/* merge of different types, fail separately */
+	__REQ_NR_BITS,		/* stops here */
+};
+
+#define REQ_WRITE		(1 << __REQ_WRITE)
+#define REQ_FAILFAST_DEV	(1 << __REQ_FAILFAST_DEV)
+#define REQ_FAILFAST_TRANSPORT	(1 << __REQ_FAILFAST_TRANSPORT)
+#define REQ_FAILFAST_DRIVER	(1 << __REQ_FAILFAST_DRIVER)
+#define REQ_SYNC		(1 << __REQ_SYNC)
+#define REQ_META		(1 << __REQ_META)
+#define REQ_PRIO		(1 << __REQ_PRIO)
+#define REQ_DISCARD		(1 << __REQ_DISCARD)
+#define REQ_NOIDLE		(1 << __REQ_NOIDLE)
+
+#define REQ_FAILFAST_MASK \
+	(REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER)
+#define REQ_COMMON_MASK \
+	(REQ_WRITE | REQ_FAILFAST_MASK | REQ_SYNC | REQ_META | REQ_PRIO | \
+	 REQ_DISCARD | REQ_NOIDLE | REQ_FLUSH | REQ_FUA | REQ_SECURE)
+#define REQ_CLONE_MASK		REQ_COMMON_MASK
+
+#define REQ_RAHEAD		(1 << __REQ_RAHEAD)
+#define REQ_THROTTLED		(1 << __REQ_THROTTLED)
+
+#define REQ_SORTED		(1 << __REQ_SORTED)
+#define REQ_SOFTBARRIER		(1 << __REQ_SOFTBARRIER)
+#define REQ_FUA			(1 << __REQ_FUA)
+#define REQ_NOMERGE		(1 << __REQ_NOMERGE)
+#define REQ_STARTED		(1 << __REQ_STARTED)
+#define REQ_DONTPREP		(1 << __REQ_DONTPREP)
+#define REQ_QUEUED		(1 << __REQ_QUEUED)
+#define REQ_ELVPRIV		(1 << __REQ_ELVPRIV)
+#define REQ_FAILED		(1 << __REQ_FAILED)
+#define REQ_QUIET		(1 << __REQ_QUIET)
+#define REQ_PREEMPT		(1 << __REQ_PREEMPT)
+#define REQ_ALLOCED		(1 << __REQ_ALLOCED)
+#define REQ_COPY_USER		(1 << __REQ_COPY_USER)
+#define REQ_FLUSH		(1 << __REQ_FLUSH)
+#define REQ_FLUSH_SEQ		(1 << __REQ_FLUSH_SEQ)
+#define REQ_IO_STAT		(1 << __REQ_IO_STAT)
+#define REQ_MIXED_MERGE		(1 << __REQ_MIXED_MERGE)
+#define REQ_SECURE		(1 << __REQ_SECURE)
+
+#endif /* __LINUX_BLK_TYPES_H */
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
new file mode 100644
index 00000000..4d4ac24a
--- /dev/null
+++ b/include/linux/blkdev.h
@@ -0,0 +1,1421 @@
+#ifndef _LINUX_BLKDEV_H
+#define _LINUX_BLKDEV_H
+
+#include <linux/sched.h>
+
+#ifdef CONFIG_BLOCK
+
+#include <linux/major.h>
+#include <linux/genhd.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <linux/pagemap.h>
+#include <linux/backing-dev.h>
+#include <linux/wait.h>
+#include <linux/mempool.h>
+#include <linux/bio.h>
+#include <linux/stringify.h>
+#include <linux/gfp.h>
+#include <linux/bsg.h>
+#include <linux/smp.h>
+
+#include <asm/scatterlist.h>
+
+struct module;
+struct scsi_ioctl_command;
+
+struct request_queue;
+struct elevator_queue;
+struct request_pm_state;
+struct blk_trace;
+struct request;
+struct sg_io_hdr;
+struct bsg_job;
+
+#define BLKDEV_MIN_RQ	4
+#define BLKDEV_MAX_RQ	128	/* Default maximum */
+
+struct request;
+typedef void (rq_end_io_fn)(struct request *, int);
+
+struct request_list {
+	/*
+	 * count[], starved[], and wait[] are indexed by
+	 * BLK_RW_SYNC/BLK_RW_ASYNC
+	 */
+	int count[2];
+	int starved[2];
+	int elvpriv;
+	mempool_t *rq_pool;
+	wait_queue_head_t wait[2];
+};
+
+/*
+ * request command types
+ */
+enum rq_cmd_type_bits {
+	REQ_TYPE_FS		= 1,	/* fs request */
+	REQ_TYPE_BLOCK_PC,		/* scsi command */
+	REQ_TYPE_SENSE,			/* sense request */
+	REQ_TYPE_PM_SUSPEND,		/* suspend request */
+	REQ_TYPE_PM_RESUME,		/* resume request */
+	REQ_TYPE_PM_SHUTDOWN,		/* shutdown request */
+	REQ_TYPE_SPECIAL,		/* driver defined type */
+	/*
+	 * for ATA/ATAPI devices. this really doesn't belong here, ide should
+	 * use REQ_TYPE_SPECIAL and use rq->cmd[0] with the range of driver
+	 * private REQ_LB opcodes to differentiate what type of request this is
+	 */
+	REQ_TYPE_ATA_TASKFILE,
+	REQ_TYPE_ATA_PC,
+};
+
+#define BLK_MAX_CDB	16
+
+/*
+ * try to put the fields that are referenced together in the same cacheline.
+ * if you modify this structure, be sure to check block/blk-core.c:blk_rq_init()
+ * as well!
+ */
+struct request {
+	struct list_head queuelist;
+	struct call_single_data csd;
+
+	struct request_queue *q;
+
+	unsigned int cmd_flags;
+	enum rq_cmd_type_bits cmd_type;
+	unsigned long atomic_flags;
+
+	int cpu;
+
+	/* the following two fields are internal, NEVER access directly */
+	unsigned int __data_len;	/* total data len */
+	sector_t __sector;		/* sector cursor */
+
+	struct bio *bio;
+	struct bio *biotail;
+
+	struct hlist_node hash;	/* merge hash */
+	/*
+	 * The rb_node is only used inside the io scheduler, requests
+	 * are pruned when moved to the dispatch queue. So let the
+	 * completion_data share space with the rb_node.
+	 */
+	union {
+		struct rb_node rb_node;	/* sort/lookup */
+		void *completion_data;
+	};
+
+	/*
+	 * Three pointers are available for the IO schedulers, if they need
+	 * more they have to dynamically allocate it.  Flush requests are
+	 * never put on the IO scheduler. So let the flush fields share
+	 * space with the elevator data.
+	 */
+	union {
+		struct {
+			struct io_cq		*icq;
+			void			*priv[2];
+		} elv;
+
+		struct {
+			unsigned int		seq;
+			struct list_head	list;
+			rq_end_io_fn		*saved_end_io;
+		} flush;
+	};
+
+	struct gendisk *rq_disk;
+	struct hd_struct *part;
+	unsigned long start_time;
+#ifdef CONFIG_BLK_CGROUP
+	unsigned long long start_time_ns;
+	unsigned long long io_start_time_ns;    /* when passed to hardware */
+#endif
+	/* Number of scatter-gather DMA addr+len pairs after
+	 * physical address coalescing is performed.
+	 */
+	unsigned short nr_phys_segments;
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+	unsigned short nr_integrity_segments;
+#endif
+
+	unsigned short ioprio;
+
+	int ref_count;
+
+	void *special;		/* opaque pointer available for LLD use */
+	char *buffer;		/* kaddr of the current segment if available */
+
+	int tag;
+	int errors;
+
+	/*
+	 * when request is used as a packet command carrier
+	 */
+	unsigned char __cmd[BLK_MAX_CDB];
+	unsigned char *cmd;
+	unsigned short cmd_len;
+
+	unsigned int extra_len;	/* length of alignment and padding */
+	unsigned int sense_len;
+	unsigned int resid_len;	/* residual count */
+	void *sense;
+
+	unsigned long deadline;
+	struct list_head timeout_list;
+	unsigned int timeout;
+	int retries;
+
+	/*
+	 * completion callback.
+	 */
+	rq_end_io_fn *end_io;
+	void *end_io_data;
+
+	/* for bidi */
+	struct request *next_rq;
+};
+
+static inline unsigned short req_get_ioprio(struct request *req)
+{
+	return req->ioprio;
+}
+
+/*
+ * State information carried for REQ_TYPE_PM_SUSPEND and REQ_TYPE_PM_RESUME
+ * requests. Some step values could eventually be made generic.
+ */
+struct request_pm_state
+{
+	/* PM state machine step value, currently driver specific */
+	int	pm_step;
+	/* requested PM state value (S1, S2, S3, S4, ...) */
+	u32	pm_state;
+	void*	data;		/* for driver use */
+};
+
+#include <linux/elevator.h>
+
+typedef void (request_fn_proc) (struct request_queue *q);
+typedef void (make_request_fn) (struct request_queue *q, struct bio *bio);
+typedef int (prep_rq_fn) (struct request_queue *, struct request *);
+typedef void (unprep_rq_fn) (struct request_queue *, struct request *);
+
+struct bio_vec;
+struct bvec_merge_data {
+	struct block_device *bi_bdev;
+	sector_t bi_sector;
+	unsigned bi_size;
+	unsigned long bi_rw;
+};
+typedef int (merge_bvec_fn) (struct request_queue *, struct bvec_merge_data *,
+			     struct bio_vec *);
+typedef void (softirq_done_fn)(struct request *);
+typedef int (dma_drain_needed_fn)(struct request *);
+typedef int (lld_busy_fn) (struct request_queue *q);
+typedef int (bsg_job_fn) (struct bsg_job *);
+
+enum blk_eh_timer_return {
+	BLK_EH_NOT_HANDLED,
+	BLK_EH_HANDLED,
+	BLK_EH_RESET_TIMER,
+};
+
+typedef enum blk_eh_timer_return (rq_timed_out_fn)(struct request *);
+
+enum blk_queue_state {
+	Queue_down,
+	Queue_up,
+};
+
+struct blk_queue_tag {
+	struct request **tag_index;	/* map of busy tags */
+	unsigned long *tag_map;		/* bit map of free/busy tags */
+	int busy;			/* current depth */
+	int max_depth;			/* what we will send to device */
+	int real_max_depth;		/* what the array can hold */
+	atomic_t refcnt;		/* map can be shared */
+};
+
+#define BLK_SCSI_MAX_CMDS	(256)
+#define BLK_SCSI_CMD_PER_LONG	(BLK_SCSI_MAX_CMDS / (sizeof(long) * 8))
+
+struct queue_limits {
+	unsigned long		bounce_pfn;
+	unsigned long		seg_boundary_mask;
+
+	unsigned int		max_hw_sectors;
+	unsigned int		max_sectors;
+	unsigned int		max_segment_size;
+	unsigned int		physical_block_size;
+	unsigned int		alignment_offset;
+	unsigned int		io_min;
+	unsigned int		io_opt;
+	unsigned int		max_discard_sectors;
+	unsigned int		discard_granularity;
+	unsigned int		discard_alignment;
+
+	unsigned short		logical_block_size;
+	unsigned short		max_segments;
+	unsigned short		max_integrity_segments;
+
+	unsigned char		misaligned;
+	unsigned char		discard_misaligned;
+	unsigned char		cluster;
+	unsigned char		discard_zeroes_data;
+};
+
+struct request_queue {
+	/*
+	 * Together with queue_head for cacheline sharing
+	 */
+	struct list_head	queue_head;
+	struct request		*last_merge;
+	struct elevator_queue	*elevator;
+
+	/*
+	 * the queue request freelist, one for reads and one for writes
+	 */
+	struct request_list	rq;
+
+	request_fn_proc		*request_fn;
+	make_request_fn		*make_request_fn;
+	prep_rq_fn		*prep_rq_fn;
+	unprep_rq_fn		*unprep_rq_fn;
+	merge_bvec_fn		*merge_bvec_fn;
+	softirq_done_fn		*softirq_done_fn;
+	rq_timed_out_fn		*rq_timed_out_fn;
+	dma_drain_needed_fn	*dma_drain_needed;
+	lld_busy_fn		*lld_busy_fn;
+
+	/*
+	 * Dispatch queue sorting
+	 */
+	sector_t		end_sector;
+	struct request		*boundary_rq;
+
+	/*
+	 * Delayed queue handling
+	 */
+	struct delayed_work	delay_work;
+
+	struct backing_dev_info	backing_dev_info;
+
+	/*
+	 * The queue owner gets to use this for whatever they like.
+	 * ll_rw_blk doesn't touch it.
+	 */
+	void			*queuedata;
+
+	/*
+	 * various queue flags, see QUEUE_* below
+	 */
+	unsigned long		queue_flags;
+
+	/*
+	 * ida allocated id for this queue.  Used to index queues from
+	 * ioctx.
+	 */
+	int			id;
+
+	/*
+	 * queue needs bounce pages for pages above this limit
+	 */
+	gfp_t			bounce_gfp;
+
+	/*
+	 * protects queue structures from reentrancy. ->__queue_lock should
+	 * _never_ be used directly, it is queue private. always use
+	 * ->queue_lock.
+	 */
+	spinlock_t		__queue_lock;
+	spinlock_t		*queue_lock;
+
+	/*
+	 * queue kobject
+	 */
+	struct kobject kobj;
+
+	/*
+	 * queue settings
+	 */
+	unsigned long		nr_requests;	/* Max # of requests */
+	unsigned int		nr_congestion_on;
+	unsigned int		nr_congestion_off;
+	unsigned int		nr_batching;
+
+	unsigned int		dma_drain_size;
+	void			*dma_drain_buffer;
+	unsigned int		dma_pad_mask;
+	unsigned int		dma_alignment;
+
+	struct blk_queue_tag	*queue_tags;
+	struct list_head	tag_busy_list;
+
+	unsigned int		nr_sorted;
+	unsigned int		in_flight[2];
+
+	unsigned int		rq_timeout;
+	struct timer_list	timeout;
+	struct list_head	timeout_list;
+
+	struct list_head	icq_list;
+
+	struct queue_limits	limits;
+
+	/*
+	 * sg stuff
+	 */
+	unsigned int		sg_timeout;
+	unsigned int		sg_reserved_size;
+	int			node;
+#ifdef CONFIG_BLK_DEV_IO_TRACE
+	struct blk_trace	*blk_trace;
+#endif
+	/*
+	 * for flush operations
+	 */
+	unsigned int		flush_flags;
+	unsigned int		flush_not_queueable:1;
+	unsigned int		flush_queue_delayed:1;
+	unsigned int		flush_pending_idx:1;
+	unsigned int		flush_running_idx:1;
+	unsigned long		flush_pending_since;
+	struct list_head	flush_queue[2];
+	struct list_head	flush_data_in_flight;
+	struct request		flush_rq;
+
+	struct mutex		sysfs_lock;
+
+#if defined(CONFIG_BLK_DEV_BSG)
+	bsg_job_fn		*bsg_job_fn;
+	int			bsg_job_size;
+	struct bsg_class_device bsg_dev;
+#endif
+
+#ifdef CONFIG_BLK_DEV_THROTTLING
+	/* Throttle data */
+	struct throtl_data *td;
+#endif
+};
+
+#define QUEUE_FLAG_QUEUED	1	/* uses generic tag queueing */
+#define QUEUE_FLAG_STOPPED	2	/* queue is stopped */
+#define	QUEUE_FLAG_SYNCFULL	3	/* read queue has been filled */
+#define QUEUE_FLAG_ASYNCFULL	4	/* write queue has been filled */
+#define QUEUE_FLAG_DEAD		5	/* queue being torn down */
+#define QUEUE_FLAG_ELVSWITCH	6	/* don't use elevator, just do FIFO */
+#define QUEUE_FLAG_BIDI		7	/* queue supports bidi requests */
+#define QUEUE_FLAG_NOMERGES     8	/* disable merge attempts */
+#define QUEUE_FLAG_SAME_COMP	9	/* complete on same CPU-group */
+#define QUEUE_FLAG_FAIL_IO     10	/* fake timeout */
+#define QUEUE_FLAG_STACKABLE   11	/* supports request stacking */
+#define QUEUE_FLAG_NONROT      12	/* non-rotational device (SSD) */
+#define QUEUE_FLAG_VIRT        QUEUE_FLAG_NONROT /* paravirt device */
+#define QUEUE_FLAG_IO_STAT     13	/* do IO stats */
+#define QUEUE_FLAG_DISCARD     14	/* supports DISCARD */
+#define QUEUE_FLAG_NOXMERGES   15	/* No extended merges */
+#define QUEUE_FLAG_ADD_RANDOM  16	/* Contributes to random pool */
+#define QUEUE_FLAG_SECDISCARD  17	/* supports SECDISCARD */
+#define QUEUE_FLAG_SAME_FORCE  18	/* force complete on same CPU */
+
+#define QUEUE_FLAG_DEFAULT	((1 << QUEUE_FLAG_IO_STAT) |		\
+				 (1 << QUEUE_FLAG_STACKABLE)	|	\
+				 (1 << QUEUE_FLAG_SAME_COMP)	|	\
+				 (1 << QUEUE_FLAG_ADD_RANDOM))
+
+static inline void queue_lockdep_assert_held(struct request_queue *q)
+{
+	if (q->queue_lock)
+		lockdep_assert_held(q->queue_lock);
+}
+
+static inline void queue_flag_set_unlocked(unsigned int flag,
+					   struct request_queue *q)
+{
+	__set_bit(flag, &q->queue_flags);
+}
+
+static inline int queue_flag_test_and_clear(unsigned int flag,
+					    struct request_queue *q)
+{
+	queue_lockdep_assert_held(q);
+
+	if (test_bit(flag, &q->queue_flags)) {
+		__clear_bit(flag, &q->queue_flags);
+		return 1;
+	}
+
+	return 0;
+}
+
+static inline int queue_flag_test_and_set(unsigned int flag,
+					  struct request_queue *q)
+{
+	queue_lockdep_assert_held(q);
+
+	if (!test_bit(flag, &q->queue_flags)) {
+		__set_bit(flag, &q->queue_flags);
+		return 0;
+	}
+
+	return 1;
+}
+
+static inline void queue_flag_set(unsigned int flag, struct request_queue *q)
+{
+	queue_lockdep_assert_held(q);
+	__set_bit(flag, &q->queue_flags);
+}
+
+static inline void queue_flag_clear_unlocked(unsigned int flag,
+					     struct request_queue *q)
+{
+	__clear_bit(flag, &q->queue_flags);
+}
+
+static inline int queue_in_flight(struct request_queue *q)
+{
+	return q->in_flight[0] + q->in_flight[1];
+}
+
+static inline void queue_flag_clear(unsigned int flag, struct request_queue *q)
+{
+	queue_lockdep_assert_held(q);
+	__clear_bit(flag, &q->queue_flags);
+}
+
+#define blk_queue_tagged(q)	test_bit(QUEUE_FLAG_QUEUED, &(q)->queue_flags)
+#define blk_queue_stopped(q)	test_bit(QUEUE_FLAG_STOPPED, &(q)->queue_flags)
+#define blk_queue_dead(q)	test_bit(QUEUE_FLAG_DEAD, &(q)->queue_flags)
+#define blk_queue_nomerges(q)	test_bit(QUEUE_FLAG_NOMERGES, &(q)->queue_flags)
+#define blk_queue_noxmerges(q)	\
+	test_bit(QUEUE_FLAG_NOXMERGES, &(q)->queue_flags)
+#define blk_queue_nonrot(q)	test_bit(QUEUE_FLAG_NONROT, &(q)->queue_flags)
+#define blk_queue_io_stat(q)	test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags)
+#define blk_queue_add_random(q)	test_bit(QUEUE_FLAG_ADD_RANDOM, &(q)->queue_flags)
+#define blk_queue_stackable(q)	\
+	test_bit(QUEUE_FLAG_STACKABLE, &(q)->queue_flags)
+#define blk_queue_discard(q)	test_bit(QUEUE_FLAG_DISCARD, &(q)->queue_flags)
+#define blk_queue_secdiscard(q)	(blk_queue_discard(q) && \
+	test_bit(QUEUE_FLAG_SECDISCARD, &(q)->queue_flags))
+
+#define blk_noretry_request(rq) \
+	((rq)->cmd_flags & (REQ_FAILFAST_DEV|REQ_FAILFAST_TRANSPORT| \
+			     REQ_FAILFAST_DRIVER))
+
+#define blk_account_rq(rq) \
+	(((rq)->cmd_flags & REQ_STARTED) && \
+	 ((rq)->cmd_type == REQ_TYPE_FS || \
+	  ((rq)->cmd_flags & REQ_DISCARD)))
+
+#define blk_pm_request(rq)	\
+	((rq)->cmd_type == REQ_TYPE_PM_SUSPEND || \
+	 (rq)->cmd_type == REQ_TYPE_PM_RESUME)
+
+#define blk_rq_cpu_valid(rq)	((rq)->cpu != -1)
+#define blk_bidi_rq(rq)		((rq)->next_rq != NULL)
+/* rq->queuelist of dequeued request must be list_empty() */
+#define blk_queued_rq(rq)	(!list_empty(&(rq)->queuelist))
+
+#define list_entry_rq(ptr)	list_entry((ptr), struct request, queuelist)
+
+#define rq_data_dir(rq)		((rq)->cmd_flags & 1)
+
+static inline unsigned int blk_queue_cluster(struct request_queue *q)
+{
+	return q->limits.cluster;
+}
+
+/*
+ * We regard a request as sync, if either a read or a sync write
+ */
+static inline bool rw_is_sync(unsigned int rw_flags)
+{
+	return !(rw_flags & REQ_WRITE) || (rw_flags & REQ_SYNC);
+}
+
+static inline bool rq_is_sync(struct request *rq)
+{
+	return rw_is_sync(rq->cmd_flags);
+}
+
+static inline int blk_queue_full(struct request_queue *q, int sync)
+{
+	if (sync)
+		return test_bit(QUEUE_FLAG_SYNCFULL, &q->queue_flags);
+	return test_bit(QUEUE_FLAG_ASYNCFULL, &q->queue_flags);
+}
+
+static inline void blk_set_queue_full(struct request_queue *q, int sync)
+{
+	if (sync)
+		queue_flag_set(QUEUE_FLAG_SYNCFULL, q);
+	else
+		queue_flag_set(QUEUE_FLAG_ASYNCFULL, q);
+}
+
+static inline void blk_clear_queue_full(struct request_queue *q, int sync)
+{
+	if (sync)
+		queue_flag_clear(QUEUE_FLAG_SYNCFULL, q);
+	else
+		queue_flag_clear(QUEUE_FLAG_ASYNCFULL, q);
+}
+
+
+/*
+ * mergeable request must not have _NOMERGE or _BARRIER bit set, nor may
+ * it already be started by driver.
+ */
+#define RQ_NOMERGE_FLAGS	\
+	(REQ_NOMERGE | REQ_STARTED | REQ_SOFTBARRIER | REQ_FLUSH | REQ_FUA)
+#define rq_mergeable(rq)	\
+	(!((rq)->cmd_flags & RQ_NOMERGE_FLAGS) && \
+	 (((rq)->cmd_flags & REQ_DISCARD) || \
+	  (rq)->cmd_type == REQ_TYPE_FS))
+
+/*
+ * q->prep_rq_fn return values
+ */
+#define BLKPREP_OK		0	/* serve it */
+#define BLKPREP_KILL		1	/* fatal error, kill */
+#define BLKPREP_DEFER		2	/* leave on queue */
+
+extern unsigned long blk_max_low_pfn, blk_max_pfn;
+
+/*
+ * standard bounce addresses:
+ *
+ * BLK_BOUNCE_HIGH	: bounce all highmem pages
+ * BLK_BOUNCE_ANY	: don't bounce anything
+ * BLK_BOUNCE_ISA	: bounce pages above ISA DMA boundary
+ */
+
+#if BITS_PER_LONG == 32
+#define BLK_BOUNCE_HIGH		((u64)blk_max_low_pfn << PAGE_SHIFT)
+#else
+#define BLK_BOUNCE_HIGH		-1ULL
+#endif
+#define BLK_BOUNCE_ANY		(-1ULL)
+#define BLK_BOUNCE_ISA		(DMA_BIT_MASK(24))
+
+/*
+ * default timeout for SG_IO if none specified
+ */
+#define BLK_DEFAULT_SG_TIMEOUT	(60 * HZ)
+#define BLK_MIN_SG_TIMEOUT	(7 * HZ)
+
+#ifdef CONFIG_BOUNCE
+extern int init_emergency_isa_pool(void);
+extern void blk_queue_bounce(struct request_queue *q, struct bio **bio);
+#else
+static inline int init_emergency_isa_pool(void)
+{
+	return 0;
+}
+static inline void blk_queue_bounce(struct request_queue *q, struct bio **bio)
+{
+}
+#endif /* CONFIG_MMU */
+
+struct rq_map_data {
+	struct page **pages;
+	int page_order;
+	int nr_entries;
+	unsigned long offset;
+	int null_mapped;
+	int from_user;
+};
+
+struct req_iterator {
+	int i;
+	struct bio *bio;
+};
+
+/* This should not be used directly - use rq_for_each_segment */
+#define for_each_bio(_bio)		\
+	for (; _bio; _bio = _bio->bi_next)
+#define __rq_for_each_bio(_bio, rq)	\
+	if ((rq->bio))			\
+		for (_bio = (rq)->bio; _bio; _bio = _bio->bi_next)
+
+#define rq_for_each_segment(bvl, _rq, _iter)			\
+	__rq_for_each_bio(_iter.bio, _rq)			\
+		bio_for_each_segment(bvl, _iter.bio, _iter.i)
+
+#define rq_iter_last(rq, _iter)					\
+		(_iter.bio->bi_next == NULL && _iter.i == _iter.bio->bi_vcnt-1)
+
+#ifndef ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
+# error	"You should define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE for your platform"
+#endif
+#if ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
+extern void rq_flush_dcache_pages(struct request *rq);
+#else
+static inline void rq_flush_dcache_pages(struct request *rq)
+{
+}
+#endif
+
+extern int blk_register_queue(struct gendisk *disk);
+extern void blk_unregister_queue(struct gendisk *disk);
+extern void generic_make_request(struct bio *bio);
+extern void blk_rq_init(struct request_queue *q, struct request *rq);
+extern void blk_put_request(struct request *);
+extern void __blk_put_request(struct request_queue *, struct request *);
+extern struct request *blk_get_request(struct request_queue *, int, gfp_t);
+extern struct request *blk_make_request(struct request_queue *, struct bio *,
+					gfp_t);
+extern void blk_requeue_request(struct request_queue *, struct request *);
+extern void blk_add_request_payload(struct request *rq, struct page *page,
+		unsigned int len);
+extern int blk_rq_check_limits(struct request_queue *q, struct request *rq);
+extern int blk_lld_busy(struct request_queue *q);
+extern int blk_rq_prep_clone(struct request *rq, struct request *rq_src,
+			     struct bio_set *bs, gfp_t gfp_mask,
+			     int (*bio_ctr)(struct bio *, struct bio *, void *),
+			     void *data);
+extern void blk_rq_unprep_clone(struct request *rq);
+extern int blk_insert_cloned_request(struct request_queue *q,
+				     struct request *rq);
+extern void blk_delay_queue(struct request_queue *, unsigned long);
+extern void blk_recount_segments(struct request_queue *, struct bio *);
+extern int scsi_verify_blk_ioctl(struct block_device *, unsigned int);
+extern int scsi_cmd_blk_ioctl(struct block_device *, fmode_t,
+			      unsigned int, void __user *);
+extern int scsi_cmd_ioctl(struct request_queue *, struct gendisk *, fmode_t,
+			  unsigned int, void __user *);
+extern int sg_scsi_ioctl(struct request_queue *, struct gendisk *, fmode_t,
+			 struct scsi_ioctl_command __user *);
+
+extern void blk_queue_bio(struct request_queue *q, struct bio *bio);
+
+/*
+ * A queue has just exitted congestion.  Note this in the global counter of
+ * congested queues, and wake up anyone who was waiting for requests to be
+ * put back.
+ */
+static inline void blk_clear_queue_congested(struct request_queue *q, int sync)
+{
+	clear_bdi_congested(&q->backing_dev_info, sync);
+}
+
+/*
+ * A queue has just entered congestion.  Flag that in the queue's VM-visible
+ * state flags and increment the global gounter of congested queues.
+ */
+static inline void blk_set_queue_congested(struct request_queue *q, int sync)
+{
+	set_bdi_congested(&q->backing_dev_info, sync);
+}
+
+extern void blk_start_queue(struct request_queue *q);
+extern void blk_stop_queue(struct request_queue *q);
+extern void blk_sync_queue(struct request_queue *q);
+extern void __blk_stop_queue(struct request_queue *q);
+extern void __blk_run_queue(struct request_queue *q);
+extern void blk_run_queue(struct request_queue *);
+extern void blk_run_queue_async(struct request_queue *q);
+extern int blk_rq_map_user(struct request_queue *, struct request *,
+			   struct rq_map_data *, void __user *, unsigned long,
+			   gfp_t);
+extern int blk_rq_unmap_user(struct bio *);
+extern int blk_rq_map_kern(struct request_queue *, struct request *, void *, unsigned int, gfp_t);
+extern int blk_rq_map_user_iov(struct request_queue *, struct request *,
+			       struct rq_map_data *, struct sg_iovec *, int,
+			       unsigned int, gfp_t);
+extern int blk_execute_rq(struct request_queue *, struct gendisk *,
+			  struct request *, int);
+extern void blk_execute_rq_nowait(struct request_queue *, struct gendisk *,
+				  struct request *, int, rq_end_io_fn *);
+
+static inline struct request_queue *bdev_get_queue(struct block_device *bdev)
+{
+	return bdev->bd_disk->queue;
+}
+
+/*
+ * blk_rq_pos()			: the current sector
+ * blk_rq_bytes()		: bytes left in the entire request
+ * blk_rq_cur_bytes()		: bytes left in the current segment
+ * blk_rq_err_bytes()		: bytes left till the next error boundary
+ * blk_rq_sectors()		: sectors left in the entire request
+ * blk_rq_cur_sectors()		: sectors left in the current segment
+ */
+static inline sector_t blk_rq_pos(const struct request *rq)
+{
+	return rq->__sector;
+}
+
+static inline unsigned int blk_rq_bytes(const struct request *rq)
+{
+	return rq->__data_len;
+}
+
+static inline int blk_rq_cur_bytes(const struct request *rq)
+{
+	return rq->bio ? bio_cur_bytes(rq->bio) : 0;
+}
+
+extern unsigned int blk_rq_err_bytes(const struct request *rq);
+
+static inline unsigned int blk_rq_sectors(const struct request *rq)
+{
+	return blk_rq_bytes(rq) >> 9;
+}
+
+static inline unsigned int blk_rq_cur_sectors(const struct request *rq)
+{
+	return blk_rq_cur_bytes(rq) >> 9;
+}
+
+/*
+ * Request issue related functions.
+ */
+extern struct request *blk_peek_request(struct request_queue *q);
+extern void blk_start_request(struct request *rq);
+extern struct request *blk_fetch_request(struct request_queue *q);
+
+/*
+ * Request completion related functions.
+ *
+ * blk_update_request() completes given number of bytes and updates
+ * the request without completing it.
+ *
+ * blk_end_request() and friends.  __blk_end_request() must be called
+ * with the request queue spinlock acquired.
+ *
+ * Several drivers define their own end_request and call
+ * blk_end_request() for parts of the original function.
+ * This prevents code duplication in drivers.
+ */
+extern bool blk_update_request(struct request *rq, int error,
+			       unsigned int nr_bytes);
+extern bool blk_end_request(struct request *rq, int error,
+			    unsigned int nr_bytes);
+extern void blk_end_request_all(struct request *rq, int error);
+extern bool blk_end_request_cur(struct request *rq, int error);
+extern bool blk_end_request_err(struct request *rq, int error);
+extern bool __blk_end_request(struct request *rq, int error,
+			      unsigned int nr_bytes);
+extern void __blk_end_request_all(struct request *rq, int error);
+extern bool __blk_end_request_cur(struct request *rq, int error);
+extern bool __blk_end_request_err(struct request *rq, int error);
+
+extern void blk_complete_request(struct request *);
+extern void __blk_complete_request(struct request *);
+extern void blk_abort_request(struct request *);
+extern void blk_abort_queue(struct request_queue *);
+extern void blk_unprep_request(struct request *);
+
+/*
+ * Access functions for manipulating queue properties
+ */
+extern struct request_queue *blk_init_queue_node(request_fn_proc *rfn,
+					spinlock_t *lock, int node_id);
+extern struct request_queue *blk_init_queue(request_fn_proc *, spinlock_t *);
+extern struct request_queue *blk_init_allocated_queue(struct request_queue *,
+						      request_fn_proc *, spinlock_t *);
+extern void blk_cleanup_queue(struct request_queue *);
+extern void blk_queue_make_request(struct request_queue *, make_request_fn *);
+extern void blk_queue_bounce_limit(struct request_queue *, u64);
+extern void blk_limits_max_hw_sectors(struct queue_limits *, unsigned int);
+extern void blk_queue_max_hw_sectors(struct request_queue *, unsigned int);
+extern void blk_queue_max_segments(struct request_queue *, unsigned short);
+extern void blk_queue_max_segment_size(struct request_queue *, unsigned int);
+extern void blk_queue_max_discard_sectors(struct request_queue *q,
+		unsigned int max_discard_sectors);
+extern void blk_queue_logical_block_size(struct request_queue *, unsigned short);
+extern void blk_queue_physical_block_size(struct request_queue *, unsigned int);
+extern void blk_queue_alignment_offset(struct request_queue *q,
+				       unsigned int alignment);
+extern void blk_limits_io_min(struct queue_limits *limits, unsigned int min);
+extern void blk_queue_io_min(struct request_queue *q, unsigned int min);
+extern void blk_limits_io_opt(struct queue_limits *limits, unsigned int opt);
+extern void blk_queue_io_opt(struct request_queue *q, unsigned int opt);
+extern void blk_set_default_limits(struct queue_limits *lim);
+extern void blk_set_stacking_limits(struct queue_limits *lim);
+extern int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
+			    sector_t offset);
+extern int bdev_stack_limits(struct queue_limits *t, struct block_device *bdev,
+			    sector_t offset);
+extern void disk_stack_limits(struct gendisk *disk, struct block_device *bdev,
+			      sector_t offset);
+extern void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b);
+extern void blk_queue_dma_pad(struct request_queue *, unsigned int);
+extern void blk_queue_update_dma_pad(struct request_queue *, unsigned int);
+extern int blk_queue_dma_drain(struct request_queue *q,
+			       dma_drain_needed_fn *dma_drain_needed,
+			       void *buf, unsigned int size);
+extern void blk_queue_lld_busy(struct request_queue *q, lld_busy_fn *fn);
+extern void blk_queue_segment_boundary(struct request_queue *, unsigned long);
+extern void blk_queue_prep_rq(struct request_queue *, prep_rq_fn *pfn);
+extern void blk_queue_unprep_rq(struct request_queue *, unprep_rq_fn *ufn);
+extern void blk_queue_merge_bvec(struct request_queue *, merge_bvec_fn *);
+extern void blk_queue_dma_alignment(struct request_queue *, int);
+extern void blk_queue_update_dma_alignment(struct request_queue *, int);
+extern void blk_queue_softirq_done(struct request_queue *, softirq_done_fn *);
+extern void blk_queue_rq_timed_out(struct request_queue *, rq_timed_out_fn *);
+extern void blk_queue_rq_timeout(struct request_queue *, unsigned int);
+extern void blk_queue_flush(struct request_queue *q, unsigned int flush);
+extern void blk_queue_flush_queueable(struct request_queue *q, bool queueable);
+extern struct backing_dev_info *blk_get_backing_dev_info(struct block_device *bdev);
+
+extern int blk_rq_map_sg(struct request_queue *, struct request *, struct scatterlist *);
+extern void blk_dump_rq_flags(struct request *, char *);
+extern long nr_blockdev_pages(void);
+
+bool __must_check blk_get_queue(struct request_queue *);
+struct request_queue *blk_alloc_queue(gfp_t);
+struct request_queue *blk_alloc_queue_node(gfp_t, int);
+extern void blk_put_queue(struct request_queue *);
+
+/*
+ * blk_plug permits building a queue of related requests by holding the I/O
+ * fragments for a short period. This allows merging of sequential requests
+ * into single larger request. As the requests are moved from a per-task list to
+ * the device's request_queue in a batch, this results in improved scalability
+ * as the lock contention for request_queue lock is reduced.
+ *
+ * It is ok not to disable preemption when adding the request to the plug list
+ * or when attempting a merge, because blk_schedule_flush_list() will only flush
+ * the plug list when the task sleeps by itself. For details, please see
+ * schedule() where blk_schedule_flush_plug() is called.
+ */
+struct blk_plug {
+	unsigned long magic; /* detect uninitialized use-cases */
+	struct list_head list; /* requests */
+	struct list_head cb_list; /* md requires an unplug callback */
+	unsigned int should_sort; /* list to be sorted before flushing? */
+};
+#define BLK_MAX_REQUEST_COUNT 16
+
+struct blk_plug_cb {
+	struct list_head list;
+	void (*callback)(struct blk_plug_cb *);
+};
+
+extern void blk_start_plug(struct blk_plug *);
+extern void blk_finish_plug(struct blk_plug *);
+extern void blk_flush_plug_list(struct blk_plug *, bool);
+
+static inline void blk_flush_plug(struct task_struct *tsk)
+{
+	struct blk_plug *plug = tsk->plug;
+
+	if (plug)
+		blk_flush_plug_list(plug, false);
+}
+
+static inline void blk_schedule_flush_plug(struct task_struct *tsk)
+{
+	struct blk_plug *plug = tsk->plug;
+
+	if (plug)
+		blk_flush_plug_list(plug, true);
+}
+
+static inline bool blk_needs_flush_plug(struct task_struct *tsk)
+{
+	struct blk_plug *plug = tsk->plug;
+
+	return plug && (!list_empty(&plug->list) || !list_empty(&plug->cb_list));
+}
+
+/*
+ * tag stuff
+ */
+#define blk_rq_tagged(rq)		((rq)->cmd_flags & REQ_QUEUED)
+extern int blk_queue_start_tag(struct request_queue *, struct request *);
+extern struct request *blk_queue_find_tag(struct request_queue *, int);
+extern void blk_queue_end_tag(struct request_queue *, struct request *);
+extern int blk_queue_init_tags(struct request_queue *, int, struct blk_queue_tag *);
+extern void blk_queue_free_tags(struct request_queue *);
+extern int blk_queue_resize_tags(struct request_queue *, int);
+extern void blk_queue_invalidate_tags(struct request_queue *);
+extern struct blk_queue_tag *blk_init_tags(int);
+extern void blk_free_tags(struct blk_queue_tag *);
+
+static inline struct request *blk_map_queue_find_tag(struct blk_queue_tag *bqt,
+						int tag)
+{
+	if (unlikely(bqt == NULL || tag >= bqt->real_max_depth))
+		return NULL;
+	return bqt->tag_index[tag];
+}
+
+#define BLKDEV_DISCARD_SECURE  0x01    /* secure discard */
+
+extern int blkdev_issue_flush(struct block_device *, gfp_t, sector_t *);
+extern int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
+		sector_t nr_sects, gfp_t gfp_mask, unsigned long flags);
+extern int blkdev_issue_zeroout(struct block_device *bdev, sector_t sector,
+			sector_t nr_sects, gfp_t gfp_mask);
+static inline int sb_issue_discard(struct super_block *sb, sector_t block,
+		sector_t nr_blocks, gfp_t gfp_mask, unsigned long flags)
+{
+	return blkdev_issue_discard(sb->s_bdev, block << (sb->s_blocksize_bits - 9),
+				    nr_blocks << (sb->s_blocksize_bits - 9),
+				    gfp_mask, flags);
+}
+static inline int sb_issue_zeroout(struct super_block *sb, sector_t block,
+		sector_t nr_blocks, gfp_t gfp_mask)
+{
+	return blkdev_issue_zeroout(sb->s_bdev,
+				    block << (sb->s_blocksize_bits - 9),
+				    nr_blocks << (sb->s_blocksize_bits - 9),
+				    gfp_mask);
+}
+
+extern int blk_verify_command(unsigned char *cmd, fmode_t has_write_perm);
+
+enum blk_default_limits {
+	BLK_MAX_SEGMENTS	= 128,
+	BLK_SAFE_MAX_SECTORS	= 255,
+	BLK_DEF_MAX_SECTORS	= 1024,
+	BLK_MAX_SEGMENT_SIZE	= 65536,
+	BLK_SEG_BOUNDARY_MASK	= 0xFFFFFFFFUL,
+};
+
+#define blkdev_entry_to_request(entry) list_entry((entry), struct request, queuelist)
+
+static inline unsigned long queue_bounce_pfn(struct request_queue *q)
+{
+	return q->limits.bounce_pfn;
+}
+
+static inline unsigned long queue_segment_boundary(struct request_queue *q)
+{
+	return q->limits.seg_boundary_mask;
+}
+
+static inline unsigned int queue_max_sectors(struct request_queue *q)
+{
+	return q->limits.max_sectors;
+}
+
+static inline unsigned int queue_max_hw_sectors(struct request_queue *q)
+{
+	return q->limits.max_hw_sectors;
+}
+
+static inline unsigned short queue_max_segments(struct request_queue *q)
+{
+	return q->limits.max_segments;
+}
+
+static inline unsigned int queue_max_segment_size(struct request_queue *q)
+{
+	return q->limits.max_segment_size;
+}
+
+static inline unsigned short queue_logical_block_size(struct request_queue *q)
+{
+	int retval = 512;
+
+	if (q && q->limits.logical_block_size)
+		retval = q->limits.logical_block_size;
+
+	return retval;
+}
+
+static inline unsigned short bdev_logical_block_size(struct block_device *bdev)
+{
+	return queue_logical_block_size(bdev_get_queue(bdev));
+}
+
+static inline unsigned int queue_physical_block_size(struct request_queue *q)
+{
+	return q->limits.physical_block_size;
+}
+
+static inline unsigned int bdev_physical_block_size(struct block_device *bdev)
+{
+	return queue_physical_block_size(bdev_get_queue(bdev));
+}
+
+static inline unsigned int queue_io_min(struct request_queue *q)
+{
+	return q->limits.io_min;
+}
+
+static inline int bdev_io_min(struct block_device *bdev)
+{
+	return queue_io_min(bdev_get_queue(bdev));
+}
+
+static inline unsigned int queue_io_opt(struct request_queue *q)
+{
+	return q->limits.io_opt;
+}
+
+static inline int bdev_io_opt(struct block_device *bdev)
+{
+	return queue_io_opt(bdev_get_queue(bdev));
+}
+
+static inline int queue_alignment_offset(struct request_queue *q)
+{
+	if (q->limits.misaligned)
+		return -1;
+
+	return q->limits.alignment_offset;
+}
+
+static inline int queue_limit_alignment_offset(struct queue_limits *lim, sector_t sector)
+{
+	unsigned int granularity = max(lim->physical_block_size, lim->io_min);
+	unsigned int alignment = (sector << 9) & (granularity - 1);
+
+	return (granularity + lim->alignment_offset - alignment)
+		& (granularity - 1);
+}
+
+static inline int bdev_alignment_offset(struct block_device *bdev)
+{
+	struct request_queue *q = bdev_get_queue(bdev);
+
+	if (q->limits.misaligned)
+		return -1;
+
+	if (bdev != bdev->bd_contains)
+		return bdev->bd_part->alignment_offset;
+
+	return q->limits.alignment_offset;
+}
+
+static inline int queue_discard_alignment(struct request_queue *q)
+{
+	if (q->limits.discard_misaligned)
+		return -1;
+
+	return q->limits.discard_alignment;
+}
+
+static inline int queue_limit_discard_alignment(struct queue_limits *lim, sector_t sector)
+{
+	unsigned int alignment = (sector << 9) & (lim->discard_granularity - 1);
+
+	if (!lim->max_discard_sectors)
+		return 0;
+
+	return (lim->discard_granularity + lim->discard_alignment - alignment)
+		& (lim->discard_granularity - 1);
+}
+
+static inline unsigned int queue_discard_zeroes_data(struct request_queue *q)
+{
+	if (q->limits.max_discard_sectors && q->limits.discard_zeroes_data == 1)
+		return 1;
+
+	return 0;
+}
+
+static inline unsigned int bdev_discard_zeroes_data(struct block_device *bdev)
+{
+	return queue_discard_zeroes_data(bdev_get_queue(bdev));
+}
+
+static inline int queue_dma_alignment(struct request_queue *q)
+{
+	return q ? q->dma_alignment : 511;
+}
+
+static inline int blk_rq_aligned(struct request_queue *q, unsigned long addr,
+				 unsigned int len)
+{
+	unsigned int alignment = queue_dma_alignment(q) | q->dma_pad_mask;
+	return !(addr & alignment) && !(len & alignment);
+}
+
+/* assumes size > 256 */
+static inline unsigned int blksize_bits(unsigned int size)
+{
+	unsigned int bits = 8;
+	do {
+		bits++;
+		size >>= 1;
+	} while (size > 256);
+	return bits;
+}
+
+static inline unsigned int block_size(struct block_device *bdev)
+{
+	return bdev->bd_block_size;
+}
+
+static inline bool queue_flush_queueable(struct request_queue *q)
+{
+	return !q->flush_not_queueable;
+}
+
+typedef struct {struct page *v;} Sector;
+
+unsigned char *read_dev_sector(struct block_device *, sector_t, Sector *);
+
+static inline void put_dev_sector(Sector p)
+{
+	page_cache_release(p.v);
+}
+
+struct work_struct;
+int kblockd_schedule_work(struct request_queue *q, struct work_struct *work);
+
+#ifdef CONFIG_BLK_CGROUP
+/*
+ * This should not be using sched_clock(). A real patch is in progress
+ * to fix this up, until that is in place we need to disable preemption
+ * around sched_clock() in this function and set_io_start_time_ns().
+ */
+static inline void set_start_time_ns(struct request *req)
+{
+	preempt_disable();
+	req->start_time_ns = sched_clock();
+	preempt_enable();
+}
+
+static inline void set_io_start_time_ns(struct request *req)
+{
+	preempt_disable();
+	req->io_start_time_ns = sched_clock();
+	preempt_enable();
+}
+
+static inline uint64_t rq_start_time_ns(struct request *req)
+{
+        return req->start_time_ns;
+}
+
+static inline uint64_t rq_io_start_time_ns(struct request *req)
+{
+        return req->io_start_time_ns;
+}
+#else
+static inline void set_start_time_ns(struct request *req) {}
+static inline void set_io_start_time_ns(struct request *req) {}
+static inline uint64_t rq_start_time_ns(struct request *req)
+{
+	return 0;
+}
+static inline uint64_t rq_io_start_time_ns(struct request *req)
+{
+	return 0;
+}
+#endif
+
+#define MODULE_ALIAS_BLOCKDEV(major,minor) \
+	MODULE_ALIAS("block-major-" __stringify(major) "-" __stringify(minor))
+#define MODULE_ALIAS_BLOCKDEV_MAJOR(major) \
+	MODULE_ALIAS("block-major-" __stringify(major) "-*")
+
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+
+#define INTEGRITY_FLAG_READ	2	/* verify data integrity on read */
+#define INTEGRITY_FLAG_WRITE	4	/* generate data integrity on write */
+
+struct blk_integrity_exchg {
+	void			*prot_buf;
+	void			*data_buf;
+	sector_t		sector;
+	unsigned int		data_size;
+	unsigned short		sector_size;
+	const char		*disk_name;
+};
+
+typedef void (integrity_gen_fn) (struct blk_integrity_exchg *);
+typedef int (integrity_vrfy_fn) (struct blk_integrity_exchg *);
+typedef void (integrity_set_tag_fn) (void *, void *, unsigned int);
+typedef void (integrity_get_tag_fn) (void *, void *, unsigned int);
+
+struct blk_integrity {
+	integrity_gen_fn	*generate_fn;
+	integrity_vrfy_fn	*verify_fn;
+	integrity_set_tag_fn	*set_tag_fn;
+	integrity_get_tag_fn	*get_tag_fn;
+
+	unsigned short		flags;
+	unsigned short		tuple_size;
+	unsigned short		sector_size;
+	unsigned short		tag_size;
+
+	const char		*name;
+
+	struct kobject		kobj;
+};
+
+extern bool blk_integrity_is_initialized(struct gendisk *);
+extern int blk_integrity_register(struct gendisk *, struct blk_integrity *);
+extern void blk_integrity_unregister(struct gendisk *);
+extern int blk_integrity_compare(struct gendisk *, struct gendisk *);
+extern int blk_rq_map_integrity_sg(struct request_queue *, struct bio *,
+				   struct scatterlist *);
+extern int blk_rq_count_integrity_sg(struct request_queue *, struct bio *);
+extern int blk_integrity_merge_rq(struct request_queue *, struct request *,
+				  struct request *);
+extern int blk_integrity_merge_bio(struct request_queue *, struct request *,
+				   struct bio *);
+
+static inline
+struct blk_integrity *bdev_get_integrity(struct block_device *bdev)
+{
+	return bdev->bd_disk->integrity;
+}
+
+static inline struct blk_integrity *blk_get_integrity(struct gendisk *disk)
+{
+	return disk->integrity;
+}
+
+static inline int blk_integrity_rq(struct request *rq)
+{
+	if (rq->bio == NULL)
+		return 0;
+
+	return bio_integrity(rq->bio);
+}
+
+static inline void blk_queue_max_integrity_segments(struct request_queue *q,
+						    unsigned int segs)
+{
+	q->limits.max_integrity_segments = segs;
+}
+
+static inline unsigned short
+queue_max_integrity_segments(struct request_queue *q)
+{
+	return q->limits.max_integrity_segments;
+}
+
+#else /* CONFIG_BLK_DEV_INTEGRITY */
+
+struct bio;
+struct block_device;
+struct gendisk;
+struct blk_integrity;
+
+static inline int blk_integrity_rq(struct request *rq)
+{
+	return 0;
+}
+static inline int blk_rq_count_integrity_sg(struct request_queue *q,
+					    struct bio *b)
+{
+	return 0;
+}
+static inline int blk_rq_map_integrity_sg(struct request_queue *q,
+					  struct bio *b,
+					  struct scatterlist *s)
+{
+	return 0;
+}
+static inline struct blk_integrity *bdev_get_integrity(struct block_device *b)
+{
+	return 0;
+}
+static inline struct blk_integrity *blk_get_integrity(struct gendisk *disk)
+{
+	return NULL;
+}
+static inline int blk_integrity_compare(struct gendisk *a, struct gendisk *b)
+{
+	return 0;
+}
+static inline int blk_integrity_register(struct gendisk *d,
+					 struct blk_integrity *b)
+{
+	return 0;
+}
+static inline void blk_integrity_unregister(struct gendisk *d)
+{
+}
+static inline void blk_queue_max_integrity_segments(struct request_queue *q,
+						    unsigned int segs)
+{
+}
+static inline unsigned short queue_max_integrity_segments(struct request_queue *q)
+{
+	return 0;
+}
+static inline int blk_integrity_merge_rq(struct request_queue *rq,
+					 struct request *r1,
+					 struct request *r2)
+{
+	return 0;
+}
+static inline int blk_integrity_merge_bio(struct request_queue *rq,
+					  struct request *r,
+					  struct bio *b)
+{
+	return 0;
+}
+static inline bool blk_integrity_is_initialized(struct gendisk *g)
+{
+	return 0;
+}
+
+#endif /* CONFIG_BLK_DEV_INTEGRITY */
+
+struct block_device_operations {
+	int (*open) (struct block_device *, fmode_t);
+	int (*release) (struct gendisk *, fmode_t);
+	int (*ioctl) (struct block_device *, fmode_t, unsigned, unsigned long);
+	int (*compat_ioctl) (struct block_device *, fmode_t, unsigned, unsigned long);
+	int (*direct_access) (struct block_device *, sector_t,
+						void **, unsigned long *);
+	unsigned int (*check_events) (struct gendisk *disk,
+				      unsigned int clearing);
+	/* ->media_changed() is DEPRECATED, use ->check_events() instead */
+	int (*media_changed) (struct gendisk *);
+	void (*unlock_native_capacity) (struct gendisk *);
+	int (*revalidate_disk) (struct gendisk *);
+	int (*getgeo)(struct block_device *, struct hd_geometry *);
+	/* this callback is with swap_lock and sometimes page table lock held */
+	void (*swap_slot_free_notify) (struct block_device *, unsigned long);
+	struct module *owner;
+};
+
+extern int __blkdev_driver_ioctl(struct block_device *, fmode_t, unsigned int,
+				 unsigned long);
+#else /* CONFIG_BLOCK */
+/*
+ * stubs for when the block layer is configured out
+ */
+#define buffer_heads_over_limit 0
+
+static inline long nr_blockdev_pages(void)
+{
+	return 0;
+}
+
+struct blk_plug {
+};
+
+static inline void blk_start_plug(struct blk_plug *plug)
+{
+}
+
+static inline void blk_finish_plug(struct blk_plug *plug)
+{
+}
+
+static inline void blk_flush_plug(struct task_struct *task)
+{
+}
+
+static inline void blk_schedule_flush_plug(struct task_struct *task)
+{
+}
+
+
+static inline bool blk_needs_flush_plug(struct task_struct *tsk)
+{
+	return false;
+}
+
+#endif /* CONFIG_BLOCK */
+
+#endif
diff --git a/include/linux/blkpg.h b/include/linux/blkpg.h
new file mode 100644
index 00000000..faf8a45a
--- /dev/null
+++ b/include/linux/blkpg.h
@@ -0,0 +1,58 @@
+#ifndef _LINUX_BLKPG_H
+#define _LINUX_BLKPG_H
+
+/*
+ * Partition table and disk geometry handling
+ *
+ * A single ioctl with lots of subfunctions:
+ *
+ * Device number stuff:
+ *    get_whole_disk()		(given the device number of a partition,
+ *                               find the device number of the encompassing disk)
+ *    get_all_partitions()	(given the device number of a disk, return the
+ *				 device numbers of all its known partitions)
+ *
+ * Partition stuff:
+ *    add_partition()
+ *    delete_partition()
+ *    test_partition_in_use()	(also for test_disk_in_use)
+ *
+ * Geometry stuff:
+ *    get_geometry()
+ *    set_geometry()
+ *    get_bios_drivedata()
+ *
+ * For today, only the partition stuff - aeb, 990515
+ */
+#include <linux/compiler.h>
+#include <linux/ioctl.h>
+
+#define BLKPG      _IO(0x12,105)
+
+/* The argument structure */
+struct blkpg_ioctl_arg {
+        int op;
+        int flags;
+        int datalen;
+        void __user *data;
+};
+
+/* The subfunctions (for the op field) */
+#define BLKPG_ADD_PARTITION	1
+#define BLKPG_DEL_PARTITION	2
+
+/* Sizes of name fields. Unused at present. */
+#define BLKPG_DEVNAMELTH	64
+#define BLKPG_VOLNAMELTH	64
+
+/* The data structure for ADD_PARTITION and DEL_PARTITION */
+struct blkpg_partition {
+	long long start;		/* starting offset in bytes */
+	long long length;		/* length in bytes */
+	int pno;			/* partition number */
+	char devname[BLKPG_DEVNAMELTH];	/* partition name, like sda5 or c0d1p2,
+					   to be used in kernel messages */
+	char volname[BLKPG_VOLNAMELTH];	/* volume label */
+};
+
+#endif /* _LINUX_BLKPG_H */
diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h
new file mode 100644
index 00000000..4d1a0748
--- /dev/null
+++ b/include/linux/blktrace_api.h
@@ -0,0 +1,254 @@
+#ifndef BLKTRACE_H
+#define BLKTRACE_H
+
+#include <linux/types.h>
+#ifdef __KERNEL__
+#include <linux/blkdev.h>
+#include <linux/relay.h>
+#include <linux/compat.h>
+#endif
+
+/*
+ * Trace categories
+ */
+enum blktrace_cat {
+	BLK_TC_READ	= 1 << 0,	/* reads */
+	BLK_TC_WRITE	= 1 << 1,	/* writes */
+	BLK_TC_FLUSH	= 1 << 2,	/* flush */
+	BLK_TC_SYNC	= 1 << 3,	/* sync IO */
+	BLK_TC_SYNCIO	= BLK_TC_SYNC,
+	BLK_TC_QUEUE	= 1 << 4,	/* queueing/merging */
+	BLK_TC_REQUEUE	= 1 << 5,	/* requeueing */
+	BLK_TC_ISSUE	= 1 << 6,	/* issue */
+	BLK_TC_COMPLETE	= 1 << 7,	/* completions */
+	BLK_TC_FS	= 1 << 8,	/* fs requests */
+	BLK_TC_PC	= 1 << 9,	/* pc requests */
+	BLK_TC_NOTIFY	= 1 << 10,	/* special message */
+	BLK_TC_AHEAD	= 1 << 11,	/* readahead */
+	BLK_TC_META	= 1 << 12,	/* metadata */
+	BLK_TC_DISCARD	= 1 << 13,	/* discard requests */
+	BLK_TC_DRV_DATA	= 1 << 14,	/* binary per-driver data */
+	BLK_TC_FUA	= 1 << 15,	/* fua requests */
+
+	BLK_TC_END	= 1 << 15,	/* we've run out of bits! */
+};
+
+#define BLK_TC_SHIFT		(16)
+#define BLK_TC_ACT(act)		((act) << BLK_TC_SHIFT)
+
+/*
+ * Basic trace actions
+ */
+enum blktrace_act {
+	__BLK_TA_QUEUE = 1,		/* queued */
+	__BLK_TA_BACKMERGE,		/* back merged to existing rq */
+	__BLK_TA_FRONTMERGE,		/* front merge to existing rq */
+	__BLK_TA_GETRQ,			/* allocated new request */
+	__BLK_TA_SLEEPRQ,		/* sleeping on rq allocation */
+	__BLK_TA_REQUEUE,		/* request requeued */
+	__BLK_TA_ISSUE,			/* sent to driver */
+	__BLK_TA_COMPLETE,		/* completed by driver */
+	__BLK_TA_PLUG,			/* queue was plugged */
+	__BLK_TA_UNPLUG_IO,		/* queue was unplugged by io */
+	__BLK_TA_UNPLUG_TIMER,		/* queue was unplugged by timer */
+	__BLK_TA_INSERT,		/* insert request */
+	__BLK_TA_SPLIT,			/* bio was split */
+	__BLK_TA_BOUNCE,		/* bio was bounced */
+	__BLK_TA_REMAP,			/* bio was remapped */
+	__BLK_TA_ABORT,			/* request aborted */
+	__BLK_TA_DRV_DATA,		/* driver-specific binary data */
+};
+
+/*
+ * Notify events.
+ */
+enum blktrace_notify {
+	__BLK_TN_PROCESS = 0,		/* establish pid/name mapping */
+	__BLK_TN_TIMESTAMP,		/* include system clock */
+	__BLK_TN_MESSAGE,		/* Character string message */
+};
+
+
+/*
+ * Trace actions in full. Additionally, read or write is masked
+ */
+#define BLK_TA_QUEUE		(__BLK_TA_QUEUE | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_BACKMERGE	(__BLK_TA_BACKMERGE | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_FRONTMERGE	(__BLK_TA_FRONTMERGE | BLK_TC_ACT(BLK_TC_QUEUE))
+#define	BLK_TA_GETRQ		(__BLK_TA_GETRQ | BLK_TC_ACT(BLK_TC_QUEUE))
+#define	BLK_TA_SLEEPRQ		(__BLK_TA_SLEEPRQ | BLK_TC_ACT(BLK_TC_QUEUE))
+#define	BLK_TA_REQUEUE		(__BLK_TA_REQUEUE | BLK_TC_ACT(BLK_TC_REQUEUE))
+#define BLK_TA_ISSUE		(__BLK_TA_ISSUE | BLK_TC_ACT(BLK_TC_ISSUE))
+#define BLK_TA_COMPLETE		(__BLK_TA_COMPLETE| BLK_TC_ACT(BLK_TC_COMPLETE))
+#define BLK_TA_PLUG		(__BLK_TA_PLUG | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_UNPLUG_IO	(__BLK_TA_UNPLUG_IO | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_UNPLUG_TIMER	(__BLK_TA_UNPLUG_TIMER | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_INSERT		(__BLK_TA_INSERT | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_SPLIT		(__BLK_TA_SPLIT)
+#define BLK_TA_BOUNCE		(__BLK_TA_BOUNCE)
+#define BLK_TA_REMAP		(__BLK_TA_REMAP | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_ABORT		(__BLK_TA_ABORT | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_DRV_DATA	(__BLK_TA_DRV_DATA | BLK_TC_ACT(BLK_TC_DRV_DATA))
+
+#define BLK_TN_PROCESS		(__BLK_TN_PROCESS | BLK_TC_ACT(BLK_TC_NOTIFY))
+#define BLK_TN_TIMESTAMP	(__BLK_TN_TIMESTAMP | BLK_TC_ACT(BLK_TC_NOTIFY))
+#define BLK_TN_MESSAGE		(__BLK_TN_MESSAGE | BLK_TC_ACT(BLK_TC_NOTIFY))
+
+#define BLK_IO_TRACE_MAGIC	0x65617400
+#define BLK_IO_TRACE_VERSION	0x07
+
+/*
+ * The trace itself
+ */
+struct blk_io_trace {
+	__u32 magic;		/* MAGIC << 8 | version */
+	__u32 sequence;		/* event number */
+	__u64 time;		/* in microseconds */
+	__u64 sector;		/* disk offset */
+	__u32 bytes;		/* transfer length */
+	__u32 action;		/* what happened */
+	__u32 pid;		/* who did it */
+	__u32 device;		/* device number */
+	__u32 cpu;		/* on what cpu did it happen */
+	__u16 error;		/* completion error */
+	__u16 pdu_len;		/* length of data after this trace */
+};
+
+/*
+ * The remap event
+ */
+struct blk_io_trace_remap {
+	__be32 device_from;
+	__be32 device_to;
+	__be64 sector_from;
+};
+
+enum {
+	Blktrace_setup = 1,
+	Blktrace_running,
+	Blktrace_stopped,
+};
+
+#define BLKTRACE_BDEV_SIZE	32
+
+/*
+ * User setup structure passed with BLKTRACESTART
+ */
+struct blk_user_trace_setup {
+	char name[BLKTRACE_BDEV_SIZE];	/* output */
+	__u16 act_mask;			/* input */
+	__u32 buf_size;			/* input */
+	__u32 buf_nr;			/* input */
+	__u64 start_lba;
+	__u64 end_lba;
+	__u32 pid;
+};
+
+#ifdef __KERNEL__
+#if defined(CONFIG_BLK_DEV_IO_TRACE)
+
+#include <linux/sysfs.h>
+
+struct blk_trace {
+	int trace_state;
+	struct rchan *rchan;
+	unsigned long __percpu *sequence;
+	unsigned char __percpu *msg_data;
+	u16 act_mask;
+	u64 start_lba;
+	u64 end_lba;
+	u32 pid;
+	u32 dev;
+	struct dentry *dir;
+	struct dentry *dropped_file;
+	struct dentry *msg_file;
+	atomic_t dropped;
+};
+
+extern int blk_trace_ioctl(struct block_device *, unsigned, char __user *);
+extern void blk_trace_shutdown(struct request_queue *);
+extern int do_blk_trace_setup(struct request_queue *q, char *name,
+			      dev_t dev, struct block_device *bdev,
+			      struct blk_user_trace_setup *buts);
+extern __printf(2, 3)
+void __trace_note_message(struct blk_trace *, const char *fmt, ...);
+
+/**
+ * blk_add_trace_msg - Add a (simple) message to the blktrace stream
+ * @q:		queue the io is for
+ * @fmt:	format to print message in
+ * args...	Variable argument list for format
+ *
+ * Description:
+ *     Records a (simple) message onto the blktrace stream.
+ *
+ *     NOTE: BLK_TN_MAX_MSG characters are output at most.
+ *     NOTE: Can not use 'static inline' due to presence of var args...
+ *
+ **/
+#define blk_add_trace_msg(q, fmt, ...)					\
+	do {								\
+		struct blk_trace *bt = (q)->blk_trace;			\
+		if (unlikely(bt))					\
+			__trace_note_message(bt, fmt, ##__VA_ARGS__);	\
+	} while (0)
+#define BLK_TN_MAX_MSG		128
+
+extern void blk_add_driver_data(struct request_queue *q, struct request *rq,
+				void *data, size_t len);
+extern int blk_trace_setup(struct request_queue *q, char *name, dev_t dev,
+			   struct block_device *bdev,
+			   char __user *arg);
+extern int blk_trace_startstop(struct request_queue *q, int start);
+extern int blk_trace_remove(struct request_queue *q);
+extern void blk_trace_remove_sysfs(struct device *dev);
+extern int blk_trace_init_sysfs(struct device *dev);
+
+extern struct attribute_group blk_trace_attr_group;
+
+#else /* !CONFIG_BLK_DEV_IO_TRACE */
+# define blk_trace_ioctl(bdev, cmd, arg)		(-ENOTTY)
+# define blk_trace_shutdown(q)				do { } while (0)
+# define do_blk_trace_setup(q, name, dev, bdev, buts)	(-ENOTTY)
+# define blk_add_driver_data(q, rq, data, len)		do {} while (0)
+# define blk_trace_setup(q, name, dev, bdev, arg)	(-ENOTTY)
+# define blk_trace_startstop(q, start)			(-ENOTTY)
+# define blk_trace_remove(q)				(-ENOTTY)
+# define blk_add_trace_msg(q, fmt, ...)			do { } while (0)
+# define blk_trace_remove_sysfs(dev)			do { } while (0)
+static inline int blk_trace_init_sysfs(struct device *dev)
+{
+	return 0;
+}
+
+#endif /* CONFIG_BLK_DEV_IO_TRACE */
+
+#ifdef CONFIG_COMPAT
+
+struct compat_blk_user_trace_setup {
+	char name[32];
+	u16 act_mask;
+	u32 buf_size;
+	u32 buf_nr;
+	compat_u64 start_lba;
+	compat_u64 end_lba;
+	u32 pid;
+};
+#define BLKTRACESETUP32 _IOWR(0x12, 115, struct compat_blk_user_trace_setup)
+
+#endif
+
+#if defined(CONFIG_EVENT_TRACING) && defined(CONFIG_BLOCK)
+
+static inline int blk_cmd_buf_len(struct request *rq)
+{
+	return (rq->cmd_type == REQ_TYPE_BLOCK_PC) ? rq->cmd_len * 3 : 1;
+}
+
+extern void blk_dump_cmd(char *buf, struct request *rq);
+extern void blk_fill_rwbs(char *rwbs, u32 rw, int bytes);
+
+#endif /* CONFIG_EVENT_TRACING && CONFIG_BLOCK */
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/include/linux/blockgroup_lock.h b/include/linux/blockgroup_lock.h
new file mode 100644
index 00000000..e44b88ba
--- /dev/null
+++ b/include/linux/blockgroup_lock.h
@@ -0,0 +1,62 @@
+#ifndef _LINUX_BLOCKGROUP_LOCK_H
+#define _LINUX_BLOCKGROUP_LOCK_H
+/*
+ * Per-blockgroup locking for ext2 and ext3.
+ *
+ * Simple hashed spinlocking.
+ */
+
+#include <linux/spinlock.h>
+#include <linux/cache.h>
+
+#ifdef CONFIG_SMP
+
+/*
+ * We want a power-of-two.  Is there a better way than this?
+ */
+
+#if NR_CPUS >= 32
+#define NR_BG_LOCKS	128
+#elif NR_CPUS >= 16
+#define NR_BG_LOCKS	64
+#elif NR_CPUS >= 8
+#define NR_BG_LOCKS	32
+#elif NR_CPUS >= 4
+#define NR_BG_LOCKS	16
+#elif NR_CPUS >= 2
+#define NR_BG_LOCKS	8
+#else
+#define NR_BG_LOCKS	4
+#endif
+
+#else	/* CONFIG_SMP */
+#define NR_BG_LOCKS	1
+#endif	/* CONFIG_SMP */
+
+struct bgl_lock {
+	spinlock_t lock;
+} ____cacheline_aligned_in_smp;
+
+struct blockgroup_lock {
+	struct bgl_lock locks[NR_BG_LOCKS];
+};
+
+static inline void bgl_lock_init(struct blockgroup_lock *bgl)
+{
+	int i;
+
+	for (i = 0; i < NR_BG_LOCKS; i++)
+		spin_lock_init(&bgl->locks[i].lock);
+}
+
+/*
+ * The accessor is a macro so we can embed a blockgroup_lock into different
+ * superblock types
+ */
+static inline spinlock_t *
+bgl_lock_ptr(struct blockgroup_lock *bgl, unsigned int block_group)
+{
+	return &bgl->locks[(block_group) & (NR_BG_LOCKS-1)].lock;
+}
+
+#endif
diff --git a/include/linux/bma150.h b/include/linux/bma150.h
new file mode 100644
index 00000000..7911fda2
--- /dev/null
+++ b/include/linux/bma150.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (c) 2011 Bosch Sensortec GmbH
+ * Copyright (c) 2011 Unixphere
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _BMA150_H_
+#define _BMA150_H_
+
+#define BMA150_DRIVER		"bma150"
+
+struct bma150_cfg {
+	bool any_motion_int;		/* Set to enable any-motion interrupt */
+	bool hg_int;			/* Set to enable high-G interrupt */
+	bool lg_int;			/* Set to enable low-G interrupt */
+	unsigned char any_motion_dur;	/* Any-motion duration */
+	unsigned char any_motion_thres;	/* Any-motion threshold */
+	unsigned char hg_hyst;		/* High-G hysterisis */
+	unsigned char hg_dur;		/* High-G duration */
+	unsigned char hg_thres;		/* High-G threshold */
+	unsigned char lg_hyst;		/* Low-G hysterisis */
+	unsigned char lg_dur;		/* Low-G duration */
+	unsigned char lg_thres;		/* Low-G threshold */
+	unsigned char range;		/* BMA0150_RANGE_xxx (in G) */
+	unsigned char bandwidth;	/* BMA0150_BW_xxx (in Hz) */
+};
+
+struct bma150_platform_data {
+	struct bma150_cfg cfg;
+	int (*irq_gpio_cfg)(void);
+};
+
+#endif /* _BMA150_H_ */
diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h
new file mode 100644
index 00000000..66d3e954
--- /dev/null
+++ b/include/linux/bootmem.h
@@ -0,0 +1,174 @@
+/*
+ * Discontiguous memory support, Kanoj Sarcar, SGI, Nov 1999
+ */
+#ifndef _LINUX_BOOTMEM_H
+#define _LINUX_BOOTMEM_H
+
+#include <linux/mmzone.h>
+#include <asm/dma.h>
+
+/*
+ *  simple boot-time physical memory area allocator.
+ */
+
+extern unsigned long max_low_pfn;
+extern unsigned long min_low_pfn;
+
+/*
+ * highest page
+ */
+extern unsigned long max_pfn;
+
+#ifndef CONFIG_NO_BOOTMEM
+/*
+ * node_bootmem_map is a map pointer - the bits represent all physical 
+ * memory pages (including holes) on the node.
+ */
+typedef struct bootmem_data {
+	unsigned long node_min_pfn;
+	unsigned long node_low_pfn;
+	void *node_bootmem_map;
+	unsigned long last_end_off;
+	unsigned long hint_idx;
+	struct list_head list;
+} bootmem_data_t;
+
+extern bootmem_data_t bootmem_node_data[];
+#endif
+
+extern unsigned long bootmem_bootmap_pages(unsigned long);
+
+extern unsigned long init_bootmem_node(pg_data_t *pgdat,
+				       unsigned long freepfn,
+				       unsigned long startpfn,
+				       unsigned long endpfn);
+extern unsigned long init_bootmem(unsigned long addr, unsigned long memend);
+
+extern unsigned long free_low_memory_core_early(int nodeid);
+extern unsigned long free_all_bootmem_node(pg_data_t *pgdat);
+extern unsigned long free_all_bootmem(void);
+
+extern void free_bootmem_node(pg_data_t *pgdat,
+			      unsigned long addr,
+			      unsigned long size);
+extern void free_bootmem(unsigned long addr, unsigned long size);
+extern void free_bootmem_late(unsigned long addr, unsigned long size);
+
+/*
+ * Flags for reserve_bootmem (also if CONFIG_HAVE_ARCH_BOOTMEM_NODE,
+ * the architecture-specific code should honor this).
+ *
+ * If flags is 0, then the return value is always 0 (success). If
+ * flags contains BOOTMEM_EXCLUSIVE, then -EBUSY is returned if the
+ * memory already was reserved.
+ */
+#define BOOTMEM_DEFAULT		0
+#define BOOTMEM_EXCLUSIVE	(1<<0)
+
+extern int reserve_bootmem(unsigned long addr,
+			   unsigned long size,
+			   int flags);
+extern int reserve_bootmem_node(pg_data_t *pgdat,
+				unsigned long physaddr,
+				unsigned long size,
+				int flags);
+
+extern void *__alloc_bootmem(unsigned long size,
+			     unsigned long align,
+			     unsigned long goal);
+extern void *__alloc_bootmem_nopanic(unsigned long size,
+				     unsigned long align,
+				     unsigned long goal);
+extern void *__alloc_bootmem_node(pg_data_t *pgdat,
+				  unsigned long size,
+				  unsigned long align,
+				  unsigned long goal);
+void *__alloc_bootmem_node_high(pg_data_t *pgdat,
+				  unsigned long size,
+				  unsigned long align,
+				  unsigned long goal);
+extern void *__alloc_bootmem_node_nopanic(pg_data_t *pgdat,
+				  unsigned long size,
+				  unsigned long align,
+				  unsigned long goal);
+extern void *__alloc_bootmem_low(unsigned long size,
+				 unsigned long align,
+				 unsigned long goal);
+extern void *__alloc_bootmem_low_node(pg_data_t *pgdat,
+				      unsigned long size,
+				      unsigned long align,
+				      unsigned long goal);
+
+#ifdef CONFIG_NO_BOOTMEM
+/* We are using top down, so it is safe to use 0 here */
+#define BOOTMEM_LOW_LIMIT 0
+#else
+#define BOOTMEM_LOW_LIMIT __pa(MAX_DMA_ADDRESS)
+#endif
+
+#define alloc_bootmem(x) \
+	__alloc_bootmem(x, SMP_CACHE_BYTES, BOOTMEM_LOW_LIMIT)
+#define alloc_bootmem_align(x, align) \
+	__alloc_bootmem(x, align, BOOTMEM_LOW_LIMIT)
+#define alloc_bootmem_nopanic(x) \
+	__alloc_bootmem_nopanic(x, SMP_CACHE_BYTES, BOOTMEM_LOW_LIMIT)
+#define alloc_bootmem_pages(x) \
+	__alloc_bootmem(x, PAGE_SIZE, BOOTMEM_LOW_LIMIT)
+#define alloc_bootmem_pages_nopanic(x) \
+	__alloc_bootmem_nopanic(x, PAGE_SIZE, BOOTMEM_LOW_LIMIT)
+#define alloc_bootmem_node(pgdat, x) \
+	__alloc_bootmem_node(pgdat, x, SMP_CACHE_BYTES, BOOTMEM_LOW_LIMIT)
+#define alloc_bootmem_node_nopanic(pgdat, x) \
+	__alloc_bootmem_node_nopanic(pgdat, x, SMP_CACHE_BYTES, BOOTMEM_LOW_LIMIT)
+#define alloc_bootmem_pages_node(pgdat, x) \
+	__alloc_bootmem_node(pgdat, x, PAGE_SIZE, BOOTMEM_LOW_LIMIT)
+#define alloc_bootmem_pages_node_nopanic(pgdat, x) \
+	__alloc_bootmem_node_nopanic(pgdat, x, PAGE_SIZE, BOOTMEM_LOW_LIMIT)
+
+#define alloc_bootmem_low(x) \
+	__alloc_bootmem_low(x, SMP_CACHE_BYTES, 0)
+#define alloc_bootmem_low_pages(x) \
+	__alloc_bootmem_low(x, PAGE_SIZE, 0)
+#define alloc_bootmem_low_pages_node(pgdat, x) \
+	__alloc_bootmem_low_node(pgdat, x, PAGE_SIZE, 0)
+
+extern int reserve_bootmem_generic(unsigned long addr, unsigned long size,
+				   int flags);
+
+extern void *alloc_bootmem_section(unsigned long size,
+				   unsigned long section_nr);
+
+#ifdef CONFIG_HAVE_ARCH_ALLOC_REMAP
+extern void *alloc_remap(int nid, unsigned long size);
+#else
+static inline void *alloc_remap(int nid, unsigned long size)
+{
+	return NULL;
+}
+#endif /* CONFIG_HAVE_ARCH_ALLOC_REMAP */
+
+extern void *alloc_large_system_hash(const char *tablename,
+				     unsigned long bucketsize,
+				     unsigned long numentries,
+				     int scale,
+				     int flags,
+				     unsigned int *_hash_shift,
+				     unsigned int *_hash_mask,
+				     unsigned long limit);
+
+#define HASH_EARLY	0x00000001	/* Allocating during early boot? */
+#define HASH_SMALL	0x00000002	/* sub-page allocation allowed, min
+					 * shift passed via *_hash_shift */
+
+/* Only NUMA needs hash distribution. 64bit NUMA architectures have
+ * sufficient vmalloc space.
+ */
+#if defined(CONFIG_NUMA) && defined(CONFIG_64BIT)
+#define HASHDIST_DEFAULT 1
+#else
+#define HASHDIST_DEFAULT 0
+#endif
+extern int hashdist;		/* Distribute hashes across NUMA nodes? */
+
+
+#endif /* _LINUX_BOOTMEM_H */
diff --git a/include/linux/bottom_half.h b/include/linux/bottom_half.h
new file mode 100644
index 00000000..27b1bcff
--- /dev/null
+++ b/include/linux/bottom_half.h
@@ -0,0 +1,9 @@
+#ifndef _LINUX_BH_H
+#define _LINUX_BH_H
+
+extern void local_bh_disable(void);
+extern void _local_bh_enable(void);
+extern void local_bh_enable(void);
+extern void local_bh_enable_ip(unsigned long ip);
+
+#endif /* _LINUX_BH_H */
diff --git a/include/linux/bpqether.h b/include/linux/bpqether.h
new file mode 100644
index 00000000..a6c35e1a
--- /dev/null
+++ b/include/linux/bpqether.h
@@ -0,0 +1,41 @@
+#ifndef	__BPQETHER_H
+#define	__BPQETHER_H
+
+/*
+ * 	Defines for the BPQETHER pseudo device driver
+ */
+
+#ifndef __LINUX_IF_ETHER_H
+#include <linux/if_ether.h>
+#endif
+
+#define SIOCSBPQETHOPT		(SIOCDEVPRIVATE+0)	/* reserved */
+#define SIOCSBPQETHADDR		(SIOCDEVPRIVATE+1)
+ 
+struct bpq_ethaddr {
+	unsigned char destination[ETH_ALEN];
+	unsigned char accept[ETH_ALEN];
+};
+
+/* 
+ * For SIOCSBPQETHOPT - this is compatible with PI2/PacketTwin card drivers,
+ * currently not implemented, though. If someone wants to hook a radio
+ * to his Ethernet card he may find this useful. ;-)
+ */
+
+#define SIOCGBPQETHPARAM	0x5000  /* get Level 1 parameters */
+#define SIOCSBPQETHPARAM	0x5001  /* set */
+
+struct bpq_req  {
+    int cmd;
+    int speed;			/* unused */
+    int clockmode;		/* unused */
+    int txdelay;
+    unsigned char persist;	/* unused */
+    int slotime;		/* unused */
+    int squeldelay;
+    int dmachan;		/* unused */
+    int irq;			/* unused */
+};
+
+#endif
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
new file mode 100644
index 00000000..b840a496
--- /dev/null
+++ b/include/linux/brcmphy.h
@@ -0,0 +1,31 @@
+#define PHY_ID_BCM50610			0x0143bd60
+#define PHY_ID_BCM50610M		0x0143bd70
+#define PHY_ID_BCM5241			0x0143bc30
+#define PHY_ID_BCMAC131			0x0143bc70
+#define PHY_ID_BCM5481			0x0143bca0
+#define PHY_ID_BCM5482			0x0143bcb0
+#define PHY_ID_BCM5411			0x00206070
+#define PHY_ID_BCM5421			0x002060e0
+#define PHY_ID_BCM5464			0x002060b0
+#define PHY_ID_BCM5461			0x002060c0
+#define PHY_ID_BCM57780			0x03625d90
+
+#define PHY_BCM_OUI_MASK		0xfffffc00
+#define PHY_BCM_OUI_1			0x00206000
+#define PHY_BCM_OUI_2			0x0143bc00
+#define PHY_BCM_OUI_3			0x03625c00
+
+
+#define PHY_BCM_FLAGS_MODE_COPPER	0x00000001
+#define PHY_BCM_FLAGS_MODE_1000BX	0x00000002
+#define PHY_BCM_FLAGS_INTF_SGMII	0x00000010
+#define PHY_BCM_FLAGS_INTF_XAUI		0x00000020
+#define PHY_BRCM_WIRESPEED_ENABLE	0x00000100
+#define PHY_BRCM_AUTO_PWRDWN_ENABLE	0x00000200
+#define PHY_BRCM_RX_REFCLK_UNUSED	0x00000400
+#define PHY_BRCM_STD_IBND_DISABLE	0x00000800
+#define PHY_BRCM_EXT_IBND_RX_ENABLE	0x00001000
+#define PHY_BRCM_EXT_IBND_TX_ENABLE	0x00002000
+#define PHY_BRCM_CLEAR_RGMII_MODE	0x00004000
+#define PHY_BRCM_DIS_TXCRXC_NOENRGY	0x00008000
+#define PHY_BCM_FLAGS_VALID		0x80000000
diff --git a/include/linux/bsearch.h b/include/linux/bsearch.h
new file mode 100644
index 00000000..90b1aa86
--- /dev/null
+++ b/include/linux/bsearch.h
@@ -0,0 +1,9 @@
+#ifndef _LINUX_BSEARCH_H
+#define _LINUX_BSEARCH_H
+
+#include <linux/types.h>
+
+void *bsearch(const void *key, const void *base, size_t num, size_t size,
+	      int (*cmp)(const void *key, const void *elt));
+
+#endif /* _LINUX_BSEARCH_H */
diff --git a/include/linux/bsg-lib.h b/include/linux/bsg-lib.h
new file mode 100644
index 00000000..f55ab8cd
--- /dev/null
+++ b/include/linux/bsg-lib.h
@@ -0,0 +1,73 @@
+/*
+ *  BSG helper library
+ *
+ *  Copyright (C) 2008   James Smart, Emulex Corporation
+ *  Copyright (C) 2011   Red Hat, Inc.  All rights reserved.
+ *  Copyright (C) 2011   Mike Christie
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#ifndef _BLK_BSG_
+#define _BLK_BSG_
+
+#include <linux/blkdev.h>
+
+struct request;
+struct device;
+struct scatterlist;
+struct request_queue;
+
+struct bsg_buffer {
+	unsigned int payload_len;
+	int sg_cnt;
+	struct scatterlist *sg_list;
+};
+
+struct bsg_job {
+	struct device *dev;
+	struct request *req;
+
+	/* Transport/driver specific request/reply structs */
+	void *request;
+	void *reply;
+
+	unsigned int request_len;
+	unsigned int reply_len;
+	/*
+	 * On entry : reply_len indicates the buffer size allocated for
+	 * the reply.
+	 *
+	 * Upon completion : the message handler must set reply_len
+	 *  to indicates the size of the reply to be returned to the
+	 *  caller.
+	 */
+
+	/* DMA payloads for the request/response */
+	struct bsg_buffer request_payload;
+	struct bsg_buffer reply_payload;
+
+	void *dd_data;		/* Used for driver-specific storage */
+};
+
+void bsg_job_done(struct bsg_job *job, int result,
+		  unsigned int reply_payload_rcv_len);
+int bsg_setup_queue(struct device *dev, struct request_queue *q, char *name,
+		    bsg_job_fn *job_fn, int dd_job_size);
+void bsg_request_fn(struct request_queue *q);
+void bsg_remove_queue(struct request_queue *q);
+void bsg_goose_queue(struct request_queue *q);
+
+#endif
diff --git a/include/linux/bsg.h b/include/linux/bsg.h
new file mode 100644
index 00000000..ecb4730d
--- /dev/null
+++ b/include/linux/bsg.h
@@ -0,0 +1,94 @@
+#ifndef BSG_H
+#define BSG_H
+
+#include <linux/types.h>
+
+#define BSG_PROTOCOL_SCSI		0
+
+#define BSG_SUB_PROTOCOL_SCSI_CMD	0
+#define BSG_SUB_PROTOCOL_SCSI_TMF	1
+#define BSG_SUB_PROTOCOL_SCSI_TRANSPORT	2
+
+/*
+ * For flags member below
+ * sg.h sg_io_hdr also has bits defined for it's flags member. However
+ * none of these bits are implemented/used by bsg. The bits below are
+ * allocated to not conflict with sg.h ones anyway.
+ */
+#define BSG_FLAG_Q_AT_TAIL 0x10 /* default, == 0 at this bit, is Q_AT_HEAD */
+
+struct sg_io_v4 {
+	__s32 guard;		/* [i] 'Q' to differentiate from v3 */
+	__u32 protocol;		/* [i] 0 -> SCSI , .... */
+	__u32 subprotocol;	/* [i] 0 -> SCSI command, 1 -> SCSI task
+				   management function, .... */
+
+	__u32 request_len;	/* [i] in bytes */
+	__u64 request;		/* [i], [*i] {SCSI: cdb} */
+	__u64 request_tag;	/* [i] {SCSI: task tag (only if flagged)} */
+	__u32 request_attr;	/* [i] {SCSI: task attribute} */
+	__u32 request_priority;	/* [i] {SCSI: task priority} */
+	__u32 request_extra;	/* [i] {spare, for padding} */
+	__u32 max_response_len;	/* [i] in bytes */
+	__u64 response;		/* [i], [*o] {SCSI: (auto)sense data} */
+
+        /* "dout_": data out (to device); "din_": data in (from device) */
+	__u32 dout_iovec_count;	/* [i] 0 -> "flat" dout transfer else
+				   dout_xfer points to array of iovec */
+	__u32 dout_xfer_len;	/* [i] bytes to be transferred to device */
+	__u32 din_iovec_count;	/* [i] 0 -> "flat" din transfer */
+	__u32 din_xfer_len;	/* [i] bytes to be transferred from device */
+	__u64 dout_xferp;	/* [i], [*i] */
+	__u64 din_xferp;	/* [i], [*o] */
+
+	__u32 timeout;		/* [i] units: millisecond */
+	__u32 flags;		/* [i] bit mask */
+	__u64 usr_ptr;		/* [i->o] unused internally */
+	__u32 spare_in;		/* [i] */
+
+	__u32 driver_status;	/* [o] 0 -> ok */
+	__u32 transport_status;	/* [o] 0 -> ok */
+	__u32 device_status;	/* [o] {SCSI: command completion status} */
+	__u32 retry_delay;	/* [o] {SCSI: status auxiliary information} */
+	__u32 info;		/* [o] additional information */
+	__u32 duration;		/* [o] time to complete, in milliseconds */
+	__u32 response_len;	/* [o] bytes of response actually written */
+	__s32 din_resid;	/* [o] din_xfer_len - actual_din_xfer_len */
+	__s32 dout_resid;	/* [o] dout_xfer_len - actual_dout_xfer_len */
+	__u64 generated_tag;	/* [o] {SCSI: transport generated task tag} */
+	__u32 spare_out;	/* [o] */
+
+	__u32 padding;
+};
+
+#ifdef __KERNEL__
+
+#if defined(CONFIG_BLK_DEV_BSG)
+struct bsg_class_device {
+	struct device *class_dev;
+	struct device *parent;
+	int minor;
+	struct request_queue *queue;
+	struct kref ref;
+	void (*release)(struct device *);
+};
+
+extern int bsg_register_queue(struct request_queue *q,
+			      struct device *parent, const char *name,
+			      void (*release)(struct device *));
+extern void bsg_unregister_queue(struct request_queue *);
+#else
+static inline int bsg_register_queue(struct request_queue *q,
+				     struct device *parent, const char *name,
+				     void (*release)(struct device *))
+{
+	return 0;
+}
+static inline void bsg_unregister_queue(struct request_queue *q)
+{
+}
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/linux/btree-128.h b/include/linux/btree-128.h
new file mode 100644
index 00000000..0b3414c4
--- /dev/null
+++ b/include/linux/btree-128.h
@@ -0,0 +1,109 @@
+extern struct btree_geo btree_geo128;
+
+struct btree_head128 { struct btree_head h; };
+
+static inline void btree_init_mempool128(struct btree_head128 *head,
+					 mempool_t *mempool)
+{
+	btree_init_mempool(&head->h, mempool);
+}
+
+static inline int btree_init128(struct btree_head128 *head)
+{
+	return btree_init(&head->h);
+}
+
+static inline void btree_destroy128(struct btree_head128 *head)
+{
+	btree_destroy(&head->h);
+}
+
+static inline void *btree_lookup128(struct btree_head128 *head, u64 k1, u64 k2)
+{
+	u64 key[2] = {k1, k2};
+	return btree_lookup(&head->h, &btree_geo128, (unsigned long *)&key);
+}
+
+static inline void *btree_get_prev128(struct btree_head128 *head,
+				      u64 *k1, u64 *k2)
+{
+	u64 key[2] = {*k1, *k2};
+	void *val;
+
+	val = btree_get_prev(&head->h, &btree_geo128,
+			     (unsigned long *)&key);
+	*k1 = key[0];
+	*k2 = key[1];
+	return val;
+}
+
+static inline int btree_insert128(struct btree_head128 *head, u64 k1, u64 k2,
+				  void *val, gfp_t gfp)
+{
+	u64 key[2] = {k1, k2};
+	return btree_insert(&head->h, &btree_geo128,
+			    (unsigned long *)&key, val, gfp);
+}
+
+static inline int btree_update128(struct btree_head128 *head, u64 k1, u64 k2,
+				  void *val)
+{
+	u64 key[2] = {k1, k2};
+	return btree_update(&head->h, &btree_geo128,
+			    (unsigned long *)&key, val);
+}
+
+static inline void *btree_remove128(struct btree_head128 *head, u64 k1, u64 k2)
+{
+	u64 key[2] = {k1, k2};
+	return btree_remove(&head->h, &btree_geo128, (unsigned long *)&key);
+}
+
+static inline void *btree_last128(struct btree_head128 *head, u64 *k1, u64 *k2)
+{
+	u64 key[2];
+	void *val;
+
+	val = btree_last(&head->h, &btree_geo128, (unsigned long *)&key[0]);
+	if (val) {
+		*k1 = key[0];
+		*k2 = key[1];
+	}
+
+	return val;
+}
+
+static inline int btree_merge128(struct btree_head128 *target,
+				 struct btree_head128 *victim,
+				 gfp_t gfp)
+{
+	return btree_merge(&target->h, &victim->h, &btree_geo128, gfp);
+}
+
+void visitor128(void *elem, unsigned long opaque, unsigned long *__key,
+		size_t index, void *__func);
+
+typedef void (*visitor128_t)(void *elem, unsigned long opaque,
+			     u64 key1, u64 key2, size_t index);
+
+static inline size_t btree_visitor128(struct btree_head128 *head,
+				      unsigned long opaque,
+				      visitor128_t func2)
+{
+	return btree_visitor(&head->h, &btree_geo128, opaque,
+			     visitor128, func2);
+}
+
+static inline size_t btree_grim_visitor128(struct btree_head128 *head,
+					   unsigned long opaque,
+					   visitor128_t func2)
+{
+	return btree_grim_visitor(&head->h, &btree_geo128, opaque,
+				  visitor128, func2);
+}
+
+#define btree_for_each_safe128(head, k1, k2, val)	\
+	for (val = btree_last128(head, &k1, &k2);	\
+	     val;					\
+	     val = btree_get_prev128(head, &k1, &k2))
+
diff --git a/include/linux/btree-type.h b/include/linux/btree-type.h
new file mode 100644
index 00000000..9a1147ef
--- /dev/null
+++ b/include/linux/btree-type.h
@@ -0,0 +1,147 @@
+#define __BTREE_TP(pfx, type, sfx)	pfx ## type ## sfx
+#define _BTREE_TP(pfx, type, sfx)	__BTREE_TP(pfx, type, sfx)
+#define BTREE_TP(pfx)			_BTREE_TP(pfx, BTREE_TYPE_SUFFIX,)
+#define BTREE_FN(name)			BTREE_TP(btree_ ## name)
+#define BTREE_TYPE_HEAD			BTREE_TP(struct btree_head)
+#define VISITOR_FN			BTREE_TP(visitor)
+#define VISITOR_FN_T			_BTREE_TP(visitor, BTREE_TYPE_SUFFIX, _t)
+
+BTREE_TYPE_HEAD {
+	struct btree_head h;
+};
+
+static inline void BTREE_FN(init_mempool)(BTREE_TYPE_HEAD *head,
+					  mempool_t *mempool)
+{
+	btree_init_mempool(&head->h, mempool);
+}
+
+static inline int BTREE_FN(init)(BTREE_TYPE_HEAD *head)
+{
+	return btree_init(&head->h);
+}
+
+static inline void BTREE_FN(destroy)(BTREE_TYPE_HEAD *head)
+{
+	btree_destroy(&head->h);
+}
+
+static inline int BTREE_FN(merge)(BTREE_TYPE_HEAD *target,
+				  BTREE_TYPE_HEAD *victim,
+				  gfp_t gfp)
+{
+	return btree_merge(&target->h, &victim->h, BTREE_TYPE_GEO, gfp);
+}
+
+#if (BITS_PER_LONG > BTREE_TYPE_BITS)
+static inline void *BTREE_FN(lookup)(BTREE_TYPE_HEAD *head, BTREE_KEYTYPE key)
+{
+	unsigned long _key = key;
+	return btree_lookup(&head->h, BTREE_TYPE_GEO, &_key);
+}
+
+static inline int BTREE_FN(insert)(BTREE_TYPE_HEAD *head, BTREE_KEYTYPE key,
+				   void *val, gfp_t gfp)
+{
+	unsigned long _key = key;
+	return btree_insert(&head->h, BTREE_TYPE_GEO, &_key, val, gfp);
+}
+
+static inline int BTREE_FN(update)(BTREE_TYPE_HEAD *head, BTREE_KEYTYPE key,
+		void *val)
+{
+	unsigned long _key = key;
+	return btree_update(&head->h, BTREE_TYPE_GEO, &_key, val);
+}
+
+static inline void *BTREE_FN(remove)(BTREE_TYPE_HEAD *head, BTREE_KEYTYPE key)
+{
+	unsigned long _key = key;
+	return btree_remove(&head->h, BTREE_TYPE_GEO, &_key);
+}
+
+static inline void *BTREE_FN(last)(BTREE_TYPE_HEAD *head, BTREE_KEYTYPE *key)
+{
+	unsigned long _key;
+	void *val = btree_last(&head->h, BTREE_TYPE_GEO, &_key);
+	if (val)
+		*key = _key;
+	return val;
+}
+
+static inline void *BTREE_FN(get_prev)(BTREE_TYPE_HEAD *head, BTREE_KEYTYPE *key)
+{
+	unsigned long _key = *key;
+	void *val = btree_get_prev(&head->h, BTREE_TYPE_GEO, &_key);
+	if (val)
+		*key = _key;
+	return val;
+}
+#else
+static inline void *BTREE_FN(lookup)(BTREE_TYPE_HEAD *head, BTREE_KEYTYPE key)
+{
+	return btree_lookup(&head->h, BTREE_TYPE_GEO, (unsigned long *)&key);
+}
+
+static inline int BTREE_FN(insert)(BTREE_TYPE_HEAD *head, BTREE_KEYTYPE key,
+			   void *val, gfp_t gfp)
+{
+	return btree_insert(&head->h, BTREE_TYPE_GEO, (unsigned long *)&key,
+			    val, gfp);
+}
+
+static inline int BTREE_FN(update)(BTREE_TYPE_HEAD *head, BTREE_KEYTYPE key,
+		void *val)
+{
+	return btree_update(&head->h, BTREE_TYPE_GEO, (unsigned long *)&key, val);
+}
+
+static inline void *BTREE_FN(remove)(BTREE_TYPE_HEAD *head, BTREE_KEYTYPE key)
+{
+	return btree_remove(&head->h, BTREE_TYPE_GEO, (unsigned long *)&key);
+}
+
+static inline void *BTREE_FN(last)(BTREE_TYPE_HEAD *head, BTREE_KEYTYPE *key)
+{
+	return btree_last(&head->h, BTREE_TYPE_GEO, (unsigned long *)key);
+}
+
+static inline void *BTREE_FN(get_prev)(BTREE_TYPE_HEAD *head, BTREE_KEYTYPE *key)
+{
+	return btree_get_prev(&head->h, BTREE_TYPE_GEO, (unsigned long *)key);
+}
+#endif
+
+void VISITOR_FN(void *elem, unsigned long opaque, unsigned long *key,
+		size_t index, void *__func);
+
+typedef void (*VISITOR_FN_T)(void *elem, unsigned long opaque,
+			     BTREE_KEYTYPE key, size_t index);
+
+static inline size_t BTREE_FN(visitor)(BTREE_TYPE_HEAD *head,
+				       unsigned long opaque,
+				       VISITOR_FN_T func2)
+{
+	return btree_visitor(&head->h, BTREE_TYPE_GEO, opaque,
+			     visitorl, func2);
+}
+
+static inline size_t BTREE_FN(grim_visitor)(BTREE_TYPE_HEAD *head,
+					    unsigned long opaque,
+					    VISITOR_FN_T func2)
+{
+	return btree_grim_visitor(&head->h, BTREE_TYPE_GEO, opaque,
+				  visitorl, func2);
+}
+
+#undef VISITOR_FN
+#undef VISITOR_FN_T
+#undef __BTREE_TP
+#undef _BTREE_TP
+#undef BTREE_TP
+#undef BTREE_FN
+#undef BTREE_TYPE_HEAD
+#undef BTREE_TYPE_SUFFIX
+#undef BTREE_TYPE_GEO
+#undef BTREE_KEYTYPE
+#undef BTREE_TYPE_BITS
diff --git a/include/linux/btree.h b/include/linux/btree.h
new file mode 100644
index 00000000..65b5bb05
--- /dev/null
+++ b/include/linux/btree.h
@@ -0,0 +1,243 @@
+#ifndef BTREE_H
+#define BTREE_H
+
+#include <linux/kernel.h>
+#include <linux/mempool.h>
+
+/**
+ * DOC: B+Tree basics
+ *
+ * A B+Tree is a data structure for looking up arbitrary (currently allowing
+ * unsigned long, u32, u64 and 2 * u64) keys into pointers. The data structure
+ * is described at http://en.wikipedia.org/wiki/B-tree, we currently do not
+ * use binary search to find the key on lookups.
+ *
+ * Each B+Tree consists of a head, that contains bookkeeping information and
+ * a variable number (starting with zero) nodes. Each node contains the keys
+ * and pointers to sub-nodes, or, for leaf nodes, the keys and values for the
+ * tree entries.
+ *
+ * Each node in this implementation has the following layout:
+ * [key1, key2, ..., keyN] [val1, val2, ..., valN]
+ *
+ * Each key here is an array of unsigned longs, geo->no_longs in total. The
+ * number of keys and values (N) is geo->no_pairs.
+ */
+
+/**
+ * struct btree_head - btree head
+ *
+ * @node: the first node in the tree
+ * @mempool: mempool used for node allocations
+ * @height: current of the tree
+ */
+struct btree_head {
+	unsigned long *node;
+	mempool_t *mempool;
+	int height;
+};
+
+/* btree geometry */
+struct btree_geo;
+
+/**
+ * btree_alloc - allocate function for the mempool
+ * @gfp_mask: gfp mask for the allocation
+ * @pool_data: unused
+ */
+void *btree_alloc(gfp_t gfp_mask, void *pool_data);
+
+/**
+ * btree_free - free function for the mempool
+ * @element: the element to free
+ * @pool_data: unused
+ */
+void btree_free(void *element, void *pool_data);
+
+/**
+ * btree_init_mempool - initialise a btree with given mempool
+ *
+ * @head: the btree head to initialise
+ * @mempool: the mempool to use
+ *
+ * When this function is used, there is no need to destroy
+ * the mempool.
+ */
+void btree_init_mempool(struct btree_head *head, mempool_t *mempool);
+
+/**
+ * btree_init - initialise a btree
+ *
+ * @head: the btree head to initialise
+ *
+ * This function allocates the memory pool that the
+ * btree needs. Returns zero or a negative error code
+ * (-%ENOMEM) when memory allocation fails.
+ *
+ */
+int __must_check btree_init(struct btree_head *head);
+
+/**
+ * btree_destroy - destroy mempool
+ *
+ * @head: the btree head to destroy
+ *
+ * This function destroys the internal memory pool, use only
+ * when using btree_init(), not with btree_init_mempool().
+ */
+void btree_destroy(struct btree_head *head);
+
+/**
+ * btree_lookup - look up a key in the btree
+ *
+ * @head: the btree to look in
+ * @geo: the btree geometry
+ * @key: the key to look up
+ *
+ * This function returns the value for the given key, or %NULL.
+ */
+void *btree_lookup(struct btree_head *head, struct btree_geo *geo,
+		   unsigned long *key);
+
+/**
+ * btree_insert - insert an entry into the btree
+ *
+ * @head: the btree to add to
+ * @geo: the btree geometry
+ * @key: the key to add (must not already be present)
+ * @val: the value to add (must not be %NULL)
+ * @gfp: allocation flags for node allocations
+ *
+ * This function returns 0 if the item could be added, or an
+ * error code if it failed (may fail due to memory pressure).
+ */
+int __must_check btree_insert(struct btree_head *head, struct btree_geo *geo,
+			      unsigned long *key, void *val, gfp_t gfp);
+/**
+ * btree_update - update an entry in the btree
+ *
+ * @head: the btree to update
+ * @geo: the btree geometry
+ * @key: the key to update
+ * @val: the value to change it to (must not be %NULL)
+ *
+ * This function returns 0 if the update was successful, or
+ * -%ENOENT if the key could not be found.
+ */
+int btree_update(struct btree_head *head, struct btree_geo *geo,
+		 unsigned long *key, void *val);
+/**
+ * btree_remove - remove an entry from the btree
+ *
+ * @head: the btree to update
+ * @geo: the btree geometry
+ * @key: the key to remove
+ *
+ * This function returns the removed entry, or %NULL if the key
+ * could not be found.
+ */
+void *btree_remove(struct btree_head *head, struct btree_geo *geo,
+		   unsigned long *key);
+
+/**
+ * btree_merge - merge two btrees
+ *
+ * @target: the tree that gets all the entries
+ * @victim: the tree that gets merged into @target
+ * @geo: the btree geometry
+ * @gfp: allocation flags
+ *
+ * The two trees @target and @victim may not contain the same keys,
+ * that is a bug and triggers a BUG(). This function returns zero
+ * if the trees were merged successfully, and may return a failure
+ * when memory allocation fails, in which case both trees might have
+ * been partially merged, i.e. some entries have been moved from
+ * @victim to @target.
+ */
+int btree_merge(struct btree_head *target, struct btree_head *victim,
+		struct btree_geo *geo, gfp_t gfp);
+
+/**
+ * btree_last - get last entry in btree
+ *
+ * @head: btree head
+ * @geo: btree geometry
+ * @key: last key
+ *
+ * Returns the last entry in the btree, and sets @key to the key
+ * of that entry; returns NULL if the tree is empty, in that case
+ * key is not changed.
+ */
+void *btree_last(struct btree_head *head, struct btree_geo *geo,
+		 unsigned long *key);
+
+/**
+ * btree_get_prev - get previous entry
+ *
+ * @head: btree head
+ * @geo: btree geometry
+ * @key: pointer to key
+ *
+ * The function returns the next item right before the value pointed to by
+ * @key, and updates @key with its key, or returns %NULL when there is no
+ * entry with a key smaller than the given key.
+ */
+void *btree_get_prev(struct btree_head *head, struct btree_geo *geo,
+		     unsigned long *key);
+
+
+/* internal use, use btree_visitor{l,32,64,128} */
+size_t btree_visitor(struct btree_head *head, struct btree_geo *geo,
+		     unsigned long opaque,
+		     void (*func)(void *elem, unsigned long opaque,
+				  unsigned long *key, size_t index,
+				  void *func2),
+		     void *func2);
+
+/* internal use, use btree_grim_visitor{l,32,64,128} */
+size_t btree_grim_visitor(struct btree_head *head, struct btree_geo *geo,
+			  unsigned long opaque,
+			  void (*func)(void *elem, unsigned long opaque,
+				       unsigned long *key,
+				       size_t index, void *func2),
+			  void *func2);
+
+
+#include <linux/btree-128.h>
+
+extern struct btree_geo btree_geo32;
+#define BTREE_TYPE_SUFFIX l
+#define BTREE_TYPE_BITS BITS_PER_LONG
+#define BTREE_TYPE_GEO &btree_geo32
+#define BTREE_KEYTYPE unsigned long
+#include <linux/btree-type.h>
+
+#define btree_for_each_safel(head, key, val)	\
+	for (val = btree_lastl(head, &key);	\
+	     val;				\
+	     val = btree_get_prevl(head, &key))
+
+#define BTREE_TYPE_SUFFIX 32
+#define BTREE_TYPE_BITS 32
+#define BTREE_TYPE_GEO &btree_geo32
+#define BTREE_KEYTYPE u32
+#include <linux/btree-type.h>
+
+#define btree_for_each_safe32(head, key, val)	\
+	for (val = btree_last32(head, &key);	\
+	     val;				\
+	     val = btree_get_prev32(head, &key))
+
+extern struct btree_geo btree_geo64;
+#define BTREE_TYPE_SUFFIX 64
+#define BTREE_TYPE_BITS 64
+#define BTREE_TYPE_GEO &btree_geo64
+#define BTREE_KEYTYPE u64
+#include <linux/btree-type.h>
+
+#define btree_for_each_safe64(head, key, val)	\
+	for (val = btree_last64(head, &key);	\
+	     val;				\
+	     val = btree_get_prev64(head, &key))
+
+#endif
diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h
new file mode 100644
index 00000000..458f4977
--- /dev/null
+++ b/include/linux/buffer_head.h
@@ -0,0 +1,350 @@
+/*
+ * include/linux/buffer_head.h
+ *
+ * Everything to do with buffer_heads.
+ */
+
+#ifndef _LINUX_BUFFER_HEAD_H
+#define _LINUX_BUFFER_HEAD_H
+
+#include <linux/types.h>
+#include <linux/fs.h>
+#include <linux/linkage.h>
+#include <linux/pagemap.h>
+#include <linux/wait.h>
+#include <linux/atomic.h>
+
+#ifdef CONFIG_BLOCK
+
+enum bh_state_bits {
+	BH_Uptodate,	/* Contains valid data */
+	BH_Dirty,	/* Is dirty */
+	BH_Lock,	/* Is locked */
+	BH_Req,		/* Has been submitted for I/O */
+	BH_Uptodate_Lock,/* Used by the first bh in a page, to serialise
+			  * IO completion of other buffers in the page
+			  */
+
+	BH_Mapped,	/* Has a disk mapping */
+	BH_New,		/* Disk mapping was newly created by get_block */
+	BH_Async_Read,	/* Is under end_buffer_async_read I/O */
+	BH_Async_Write,	/* Is under end_buffer_async_write I/O */
+	BH_Delay,	/* Buffer is not yet allocated on disk */
+	BH_Boundary,	/* Block is followed by a discontiguity */
+	BH_Write_EIO,	/* I/O error on write */
+	BH_Unwritten,	/* Buffer is allocated on disk but not written */
+	BH_Quiet,	/* Buffer Error Prinks to be quiet */
+
+	BH_PrivateStart,/* not a state bit, but the first bit available
+			 * for private allocation by other entities
+			 */
+};
+
+#define MAX_BUF_PER_PAGE (PAGE_CACHE_SIZE / 512)
+
+struct page;
+struct buffer_head;
+struct address_space;
+typedef void (bh_end_io_t)(struct buffer_head *bh, int uptodate);
+
+/*
+ * Historically, a buffer_head was used to map a single block
+ * within a page, and of course as the unit of I/O through the
+ * filesystem and block layers.  Nowadays the basic I/O unit
+ * is the bio, and buffer_heads are used for extracting block
+ * mappings (via a get_block_t call), for tracking state within
+ * a page (via a page_mapping) and for wrapping bio submission
+ * for backward compatibility reasons (e.g. submit_bh).
+ */
+struct buffer_head {
+	unsigned long b_state;		/* buffer state bitmap (see above) */
+	struct buffer_head *b_this_page;/* circular list of page's buffers */
+	struct page *b_page;		/* the page this bh is mapped to */
+
+	sector_t b_blocknr;		/* start block number */
+	size_t b_size;			/* size of mapping */
+	char *b_data;			/* pointer to data within the page */
+
+	struct block_device *b_bdev;
+	bh_end_io_t *b_end_io;		/* I/O completion */
+ 	void *b_private;		/* reserved for b_end_io */
+	struct list_head b_assoc_buffers; /* associated with another mapping */
+	struct address_space *b_assoc_map;	/* mapping this buffer is
+						   associated with */
+	atomic_t b_count;		/* users using this buffer_head */
+};
+
+/*
+ * macro tricks to expand the set_buffer_foo(), clear_buffer_foo()
+ * and buffer_foo() functions.
+ */
+#define BUFFER_FNS(bit, name)						\
+static inline void set_buffer_##name(struct buffer_head *bh)		\
+{									\
+	set_bit(BH_##bit, &(bh)->b_state);				\
+}									\
+static inline void clear_buffer_##name(struct buffer_head *bh)		\
+{									\
+	clear_bit(BH_##bit, &(bh)->b_state);				\
+}									\
+static inline int buffer_##name(const struct buffer_head *bh)		\
+{									\
+	return test_bit(BH_##bit, &(bh)->b_state);			\
+}
+
+/*
+ * test_set_buffer_foo() and test_clear_buffer_foo()
+ */
+#define TAS_BUFFER_FNS(bit, name)					\
+static inline int test_set_buffer_##name(struct buffer_head *bh)	\
+{									\
+	return test_and_set_bit(BH_##bit, &(bh)->b_state);		\
+}									\
+static inline int test_clear_buffer_##name(struct buffer_head *bh)	\
+{									\
+	return test_and_clear_bit(BH_##bit, &(bh)->b_state);		\
+}									\
+
+/*
+ * Emit the buffer bitops functions.   Note that there are also functions
+ * of the form "mark_buffer_foo()".  These are higher-level functions which
+ * do something in addition to setting a b_state bit.
+ */
+BUFFER_FNS(Uptodate, uptodate)
+BUFFER_FNS(Dirty, dirty)
+TAS_BUFFER_FNS(Dirty, dirty)
+BUFFER_FNS(Lock, locked)
+BUFFER_FNS(Req, req)
+TAS_BUFFER_FNS(Req, req)
+BUFFER_FNS(Mapped, mapped)
+BUFFER_FNS(New, new)
+BUFFER_FNS(Async_Read, async_read)
+BUFFER_FNS(Async_Write, async_write)
+BUFFER_FNS(Delay, delay)
+BUFFER_FNS(Boundary, boundary)
+BUFFER_FNS(Write_EIO, write_io_error)
+BUFFER_FNS(Unwritten, unwritten)
+
+#define bh_offset(bh)		((unsigned long)(bh)->b_data & ~PAGE_MASK)
+#define touch_buffer(bh)	mark_page_accessed(bh->b_page)
+
+/* If we *know* page->private refers to buffer_heads */
+#define page_buffers(page)					\
+	({							\
+		BUG_ON(!PagePrivate(page));			\
+		((struct buffer_head *)page_private(page));	\
+	})
+#define page_has_buffers(page)	PagePrivate(page)
+
+/*
+ * Declarations
+ */
+
+void mark_buffer_dirty(struct buffer_head *bh);
+void init_buffer(struct buffer_head *, bh_end_io_t *, void *);
+void set_bh_page(struct buffer_head *bh,
+		struct page *page, unsigned long offset);
+int try_to_free_buffers(struct page *);
+struct buffer_head *alloc_page_buffers(struct page *page, unsigned long size,
+		int retry);
+void create_empty_buffers(struct page *, unsigned long,
+			unsigned long b_state);
+void end_buffer_read_sync(struct buffer_head *bh, int uptodate);
+void end_buffer_write_sync(struct buffer_head *bh, int uptodate);
+void end_buffer_async_write(struct buffer_head *bh, int uptodate);
+
+/* Things to do with buffers at mapping->private_list */
+void mark_buffer_dirty_inode(struct buffer_head *bh, struct inode *inode);
+int inode_has_buffers(struct inode *);
+void invalidate_inode_buffers(struct inode *);
+int remove_inode_buffers(struct inode *inode);
+int sync_mapping_buffers(struct address_space *mapping);
+void unmap_underlying_metadata(struct block_device *bdev, sector_t block);
+
+void mark_buffer_async_write(struct buffer_head *bh);
+void __wait_on_buffer(struct buffer_head *);
+wait_queue_head_t *bh_waitq_head(struct buffer_head *bh);
+struct buffer_head *__find_get_block(struct block_device *bdev, sector_t block,
+			unsigned size);
+struct buffer_head *__getblk(struct block_device *bdev, sector_t block,
+			unsigned size);
+void __brelse(struct buffer_head *);
+void __bforget(struct buffer_head *);
+void __breadahead(struct block_device *, sector_t block, unsigned int size);
+struct buffer_head *__bread(struct block_device *, sector_t block, unsigned size);
+void invalidate_bh_lrus(void);
+struct buffer_head *alloc_buffer_head(gfp_t gfp_flags);
+void free_buffer_head(struct buffer_head * bh);
+void unlock_buffer(struct buffer_head *bh);
+void __lock_buffer(struct buffer_head *bh);
+void ll_rw_block(int, int, struct buffer_head * bh[]);
+int sync_dirty_buffer(struct buffer_head *bh);
+int __sync_dirty_buffer(struct buffer_head *bh, int rw);
+void write_dirty_buffer(struct buffer_head *bh, int rw);
+int submit_bh(int, struct buffer_head *);
+void write_boundary_block(struct block_device *bdev,
+			sector_t bblock, unsigned blocksize);
+int bh_uptodate_or_lock(struct buffer_head *bh);
+int bh_submit_read(struct buffer_head *bh);
+
+extern int buffer_heads_over_limit;
+
+/*
+ * Generic address_space_operations implementations for buffer_head-backed
+ * address_spaces.
+ */
+void block_invalidatepage(struct page *page, unsigned long offset);
+int block_write_full_page(struct page *page, get_block_t *get_block,
+				struct writeback_control *wbc);
+int block_write_full_page_endio(struct page *page, get_block_t *get_block,
+			struct writeback_control *wbc, bh_end_io_t *handler);
+int block_read_full_page(struct page*, get_block_t*);
+int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc,
+				unsigned long from);
+int block_write_begin(struct address_space *mapping, loff_t pos, unsigned len,
+		unsigned flags, struct page **pagep, get_block_t *get_block);
+int __block_write_begin(struct page *page, loff_t pos, unsigned len,
+		get_block_t *get_block);
+int block_write_end(struct file *, struct address_space *,
+				loff_t, unsigned, unsigned,
+				struct page *, void *);
+int generic_write_end(struct file *, struct address_space *,
+				loff_t, unsigned, unsigned,
+				struct page *, void *);
+void page_zero_new_buffers(struct page *page, unsigned from, unsigned to);
+int cont_write_begin(struct file *, struct address_space *, loff_t,
+			unsigned, unsigned, struct page **, void **,
+			get_block_t *, loff_t *);
+int generic_cont_expand_simple(struct inode *inode, loff_t size);
+int block_commit_write(struct page *page, unsigned from, unsigned to);
+int __block_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf,
+				get_block_t get_block);
+int block_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf,
+				get_block_t get_block);
+/* Convert errno to return value from ->page_mkwrite() call */
+static inline int block_page_mkwrite_return(int err)
+{
+	if (err == 0)
+		return VM_FAULT_LOCKED;
+	if (err == -EFAULT)
+		return VM_FAULT_NOPAGE;
+	if (err == -ENOMEM)
+		return VM_FAULT_OOM;
+	if (err == -EAGAIN)
+		return VM_FAULT_RETRY;
+	/* -ENOSPC, -EDQUOT, -EIO ... */
+	return VM_FAULT_SIGBUS;
+}
+sector_t generic_block_bmap(struct address_space *, sector_t, get_block_t *);
+int block_truncate_page(struct address_space *, loff_t, get_block_t *);
+int nobh_write_begin(struct address_space *, loff_t, unsigned, unsigned,
+				struct page **, void **, get_block_t*);
+int nobh_write_end(struct file *, struct address_space *,
+				loff_t, unsigned, unsigned,
+				struct page *, void *);
+int nobh_truncate_page(struct address_space *, loff_t, get_block_t *);
+int nobh_writepage(struct page *page, get_block_t *get_block,
+                        struct writeback_control *wbc);
+
+void buffer_init(void);
+
+/*
+ * inline definitions
+ */
+
+static inline void attach_page_buffers(struct page *page,
+		struct buffer_head *head)
+{
+	page_cache_get(page);
+	SetPagePrivate(page);
+	set_page_private(page, (unsigned long)head);
+}
+
+static inline void get_bh(struct buffer_head *bh)
+{
+        atomic_inc(&bh->b_count);
+}
+
+static inline void put_bh(struct buffer_head *bh)
+{
+        smp_mb__before_atomic_dec();
+        atomic_dec(&bh->b_count);
+}
+
+static inline void brelse(struct buffer_head *bh)
+{
+	if (bh)
+		__brelse(bh);
+}
+
+static inline void bforget(struct buffer_head *bh)
+{
+	if (bh)
+		__bforget(bh);
+}
+
+static inline struct buffer_head *
+sb_bread(struct super_block *sb, sector_t block)
+{
+	return __bread(sb->s_bdev, block, sb->s_blocksize);
+}
+
+static inline void
+sb_breadahead(struct super_block *sb, sector_t block)
+{
+	__breadahead(sb->s_bdev, block, sb->s_blocksize);
+}
+
+static inline struct buffer_head *
+sb_getblk(struct super_block *sb, sector_t block)
+{
+	return __getblk(sb->s_bdev, block, sb->s_blocksize);
+}
+
+static inline struct buffer_head *
+sb_find_get_block(struct super_block *sb, sector_t block)
+{
+	return __find_get_block(sb->s_bdev, block, sb->s_blocksize);
+}
+
+static inline void
+map_bh(struct buffer_head *bh, struct super_block *sb, sector_t block)
+{
+	set_buffer_mapped(bh);
+	bh->b_bdev = sb->s_bdev;
+	bh->b_blocknr = block;
+	bh->b_size = sb->s_blocksize;
+}
+
+static inline void wait_on_buffer(struct buffer_head *bh)
+{
+	might_sleep();
+	if (buffer_locked(bh))
+		__wait_on_buffer(bh);
+}
+
+static inline int trylock_buffer(struct buffer_head *bh)
+{
+	return likely(!test_and_set_bit_lock(BH_Lock, &bh->b_state));
+}
+
+static inline void lock_buffer(struct buffer_head *bh)
+{
+	might_sleep();
+	if (!trylock_buffer(bh))
+		__lock_buffer(bh);
+}
+
+extern int __set_page_dirty_buffers(struct page *page);
+
+#else /* CONFIG_BLOCK */
+
+static inline void buffer_init(void) {}
+static inline int try_to_free_buffers(struct page *page) { return 1; }
+static inline int inode_has_buffers(struct inode *inode) { return 0; }
+static inline void invalidate_inode_buffers(struct inode *inode) {}
+static inline int remove_inode_buffers(struct inode *inode) { return 1; }
+static inline int sync_mapping_buffers(struct address_space *mapping) { return 0; }
+
+#endif /* CONFIG_BLOCK */
+#endif /* _LINUX_BUFFER_HEAD_H */
diff --git a/include/linux/bug.h b/include/linux/bug.h
new file mode 100644
index 00000000..72961c39
--- /dev/null
+++ b/include/linux/bug.h
@@ -0,0 +1,99 @@
+#ifndef _LINUX_BUG_H
+#define _LINUX_BUG_H
+
+#include <asm/bug.h>
+
+enum bug_trap_type {
+	BUG_TRAP_TYPE_NONE = 0,
+	BUG_TRAP_TYPE_WARN = 1,
+	BUG_TRAP_TYPE_BUG = 2,
+};
+
+struct pt_regs;
+
+#ifdef __CHECKER__
+#define BUILD_BUG_ON_NOT_POWER_OF_2(n)
+#define BUILD_BUG_ON_ZERO(e) (0)
+#define BUILD_BUG_ON_NULL(e) ((void*)0)
+#define BUILD_BUG_ON(condition)
+#define BUILD_BUG() (0)
+#else /* __CHECKER__ */
+
+/* Force a compilation error if a constant expression is not a power of 2 */
+#define BUILD_BUG_ON_NOT_POWER_OF_2(n)			\
+	BUILD_BUG_ON((n) == 0 || (((n) & ((n) - 1)) != 0))
+
+/* Force a compilation error if condition is true, but also produce a
+   result (of value 0 and type size_t), so the expression can be used
+   e.g. in a structure initializer (or where-ever else comma expressions
+   aren't permitted). */
+#define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:-!!(e); }))
+#define BUILD_BUG_ON_NULL(e) ((void *)sizeof(struct { int:-!!(e); }))
+
+/**
+ * BUILD_BUG_ON - break compile if a condition is true.
+ * @condition: the condition which the compiler should know is false.
+ *
+ * If you have some code which relies on certain constants being equal, or
+ * other compile-time-evaluated condition, you should use BUILD_BUG_ON to
+ * detect if someone changes it.
+ *
+ * The implementation uses gcc's reluctance to create a negative array, but
+ * gcc (as of 4.4) only emits that error for obvious cases (eg. not arguments
+ * to inline functions).  So as a fallback we use the optimizer; if it can't
+ * prove the condition is false, it will cause a link error on the undefined
+ * "__build_bug_on_failed".  This error message can be harder to track down
+ * though, hence the two different methods.
+ */
+#ifndef __OPTIMIZE__
+#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
+#else
+extern int __build_bug_on_failed;
+#define BUILD_BUG_ON(condition)					\
+	do {							\
+		((void)sizeof(char[1 - 2*!!(condition)]));	\
+		if (condition) __build_bug_on_failed = 1;	\
+	} while(0)
+#endif
+
+/**
+ * BUILD_BUG - break compile if used.
+ *
+ * If you have some code that you expect the compiler to eliminate at
+ * build time, you should use BUILD_BUG to detect if it is
+ * unexpectedly used.
+ */
+#define BUILD_BUG()						\
+	do {							\
+		extern void __build_bug_failed(void)		\
+			__linktime_error("BUILD_BUG failed");	\
+		__build_bug_failed();				\
+	} while (0)
+
+#endif	/* __CHECKER__ */
+
+#ifdef CONFIG_GENERIC_BUG
+#include <asm-generic/bug.h>
+
+static inline int is_warning_bug(const struct bug_entry *bug)
+{
+	return bug->flags & BUGFLAG_WARNING;
+}
+
+const struct bug_entry *find_bug(unsigned long bugaddr);
+
+enum bug_trap_type report_bug(unsigned long bug_addr, struct pt_regs *regs);
+
+/* These are defined by the architecture */
+int is_valid_bugaddr(unsigned long addr);
+
+#else	/* !CONFIG_GENERIC_BUG */
+
+static inline enum bug_trap_type report_bug(unsigned long bug_addr,
+					    struct pt_regs *regs)
+{
+	return BUG_TRAP_TYPE_BUG;
+}
+
+#endif	/* CONFIG_GENERIC_BUG */
+#endif	/* _LINUX_BUG_H */
diff --git a/include/linux/byteorder/Kbuild b/include/linux/byteorder/Kbuild
new file mode 100644
index 00000000..5896e344
--- /dev/null
+++ b/include/linux/byteorder/Kbuild
@@ -0,0 +1,2 @@
+header-y += big_endian.h
+header-y += little_endian.h
diff --git a/include/linux/byteorder/big_endian.h b/include/linux/byteorder/big_endian.h
new file mode 100644
index 00000000..3c80fd7e
--- /dev/null
+++ b/include/linux/byteorder/big_endian.h
@@ -0,0 +1,108 @@
+#ifndef _LINUX_BYTEORDER_BIG_ENDIAN_H
+#define _LINUX_BYTEORDER_BIG_ENDIAN_H
+
+#ifndef __BIG_ENDIAN
+#define __BIG_ENDIAN 4321
+#endif
+#ifndef __BIG_ENDIAN_BITFIELD
+#define __BIG_ENDIAN_BITFIELD
+#endif
+
+#include <linux/types.h>
+#include <linux/swab.h>
+
+#define __constant_htonl(x) ((__force __be32)(__u32)(x))
+#define __constant_ntohl(x) ((__force __u32)(__be32)(x))
+#define __constant_htons(x) ((__force __be16)(__u16)(x))
+#define __constant_ntohs(x) ((__force __u16)(__be16)(x))
+#define __constant_cpu_to_le64(x) ((__force __le64)___constant_swab64((x)))
+#define __constant_le64_to_cpu(x) ___constant_swab64((__force __u64)(__le64)(x))
+#define __constant_cpu_to_le32(x) ((__force __le32)___constant_swab32((x)))
+#define __constant_le32_to_cpu(x) ___constant_swab32((__force __u32)(__le32)(x))
+#define __constant_cpu_to_le16(x) ((__force __le16)___constant_swab16((x)))
+#define __constant_le16_to_cpu(x) ___constant_swab16((__force __u16)(__le16)(x))
+#define __constant_cpu_to_be64(x) ((__force __be64)(__u64)(x))
+#define __constant_be64_to_cpu(x) ((__force __u64)(__be64)(x))
+#define __constant_cpu_to_be32(x) ((__force __be32)(__u32)(x))
+#define __constant_be32_to_cpu(x) ((__force __u32)(__be32)(x))
+#define __constant_cpu_to_be16(x) ((__force __be16)(__u16)(x))
+#define __constant_be16_to_cpu(x) ((__force __u16)(__be16)(x))
+#define __cpu_to_le64(x) ((__force __le64)__swab64((x)))
+#define __le64_to_cpu(x) __swab64((__force __u64)(__le64)(x))
+#define __cpu_to_le32(x) ((__force __le32)__swab32((x)))
+#define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x))
+#define __cpu_to_le16(x) ((__force __le16)__swab16((x)))
+#define __le16_to_cpu(x) __swab16((__force __u16)(__le16)(x))
+#define __cpu_to_be64(x) ((__force __be64)(__u64)(x))
+#define __be64_to_cpu(x) ((__force __u64)(__be64)(x))
+#define __cpu_to_be32(x) ((__force __be32)(__u32)(x))
+#define __be32_to_cpu(x) ((__force __u32)(__be32)(x))
+#define __cpu_to_be16(x) ((__force __be16)(__u16)(x))
+#define __be16_to_cpu(x) ((__force __u16)(__be16)(x))
+
+static inline __le64 __cpu_to_le64p(const __u64 *p)
+{
+	return (__force __le64)__swab64p(p);
+}
+static inline __u64 __le64_to_cpup(const __le64 *p)
+{
+	return __swab64p((__u64 *)p);
+}
+static inline __le32 __cpu_to_le32p(const __u32 *p)
+{
+	return (__force __le32)__swab32p(p);
+}
+static inline __u32 __le32_to_cpup(const __le32 *p)
+{
+	return __swab32p((__u32 *)p);
+}
+static inline __le16 __cpu_to_le16p(const __u16 *p)
+{
+	return (__force __le16)__swab16p(p);
+}
+static inline __u16 __le16_to_cpup(const __le16 *p)
+{
+	return __swab16p((__u16 *)p);
+}
+static inline __be64 __cpu_to_be64p(const __u64 *p)
+{
+	return (__force __be64)*p;
+}
+static inline __u64 __be64_to_cpup(const __be64 *p)
+{
+	return (__force __u64)*p;
+}
+static inline __be32 __cpu_to_be32p(const __u32 *p)
+{
+	return (__force __be32)*p;
+}
+static inline __u32 __be32_to_cpup(const __be32 *p)
+{
+	return (__force __u32)*p;
+}
+static inline __be16 __cpu_to_be16p(const __u16 *p)
+{
+	return (__force __be16)*p;
+}
+static inline __u16 __be16_to_cpup(const __be16 *p)
+{
+	return (__force __u16)*p;
+}
+#define __cpu_to_le64s(x) __swab64s((x))
+#define __le64_to_cpus(x) __swab64s((x))
+#define __cpu_to_le32s(x) __swab32s((x))
+#define __le32_to_cpus(x) __swab32s((x))
+#define __cpu_to_le16s(x) __swab16s((x))
+#define __le16_to_cpus(x) __swab16s((x))
+#define __cpu_to_be64s(x) do { (void)(x); } while (0)
+#define __be64_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_be32s(x) do { (void)(x); } while (0)
+#define __be32_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_be16s(x) do { (void)(x); } while (0)
+#define __be16_to_cpus(x) do { (void)(x); } while (0)
+
+#ifdef __KERNEL__
+#include <linux/byteorder/generic.h>
+#endif
+
+#endif /* _LINUX_BYTEORDER_BIG_ENDIAN_H */
diff --git a/include/linux/byteorder/generic.h b/include/linux/byteorder/generic.h
new file mode 100644
index 00000000..0846e6b9
--- /dev/null
+++ b/include/linux/byteorder/generic.h
@@ -0,0 +1,173 @@
+#ifndef _LINUX_BYTEORDER_GENERIC_H
+#define _LINUX_BYTEORDER_GENERIC_H
+
+/*
+ * linux/byteorder_generic.h
+ * Generic Byte-reordering support
+ *
+ * The "... p" macros, like le64_to_cpup, can be used with pointers
+ * to unaligned data, but there will be a performance penalty on 
+ * some architectures.  Use get_unaligned for unaligned data.
+ *
+ * Francois-Rene Rideau <fare@tunes.org> 19970707
+ *    gathered all the good ideas from all asm-foo/byteorder.h into one file,
+ *    cleaned them up.
+ *    I hope it is compliant with non-GCC compilers.
+ *    I decided to put __BYTEORDER_HAS_U64__ in byteorder.h,
+ *    because I wasn't sure it would be ok to put it in types.h
+ *    Upgraded it to 2.1.43
+ * Francois-Rene Rideau <fare@tunes.org> 19971012
+ *    Upgraded it to 2.1.57
+ *    to please Linus T., replaced huge #ifdef's between little/big endian
+ *    by nestedly #include'd files.
+ * Francois-Rene Rideau <fare@tunes.org> 19971205
+ *    Made it to 2.1.71; now a facelift:
+ *    Put files under include/linux/byteorder/
+ *    Split swab from generic support.
+ *
+ * TODO:
+ *   = Regular kernel maintainers could also replace all these manual
+ *    byteswap macros that remain, disseminated among drivers,
+ *    after some grep or the sources...
+ *   = Linus might want to rename all these macros and files to fit his taste,
+ *    to fit his personal naming scheme.
+ *   = it seems that a few drivers would also appreciate
+ *    nybble swapping support...
+ *   = every architecture could add their byteswap macro in asm/byteorder.h
+ *    see how some architectures already do (i386, alpha, ppc, etc)
+ *   = cpu_to_beXX and beXX_to_cpu might some day need to be well
+ *    distinguished throughout the kernel. This is not the case currently,
+ *    since little endian, big endian, and pdp endian machines needn't it.
+ *    But this might be the case for, say, a port of Linux to 20/21 bit
+ *    architectures (and F21 Linux addict around?).
+ */
+
+/*
+ * The following macros are to be defined by <asm/byteorder.h>:
+ *
+ * Conversion of long and short int between network and host format
+ *	ntohl(__u32 x)
+ *	ntohs(__u16 x)
+ *	htonl(__u32 x)
+ *	htons(__u16 x)
+ * It seems that some programs (which? where? or perhaps a standard? POSIX?)
+ * might like the above to be functions, not macros (why?).
+ * if that's true, then detect them, and take measures.
+ * Anyway, the measure is: define only ___ntohl as a macro instead,
+ * and in a separate file, have
+ * unsigned long inline ntohl(x){return ___ntohl(x);}
+ *
+ * The same for constant arguments
+ *	__constant_ntohl(__u32 x)
+ *	__constant_ntohs(__u16 x)
+ *	__constant_htonl(__u32 x)
+ *	__constant_htons(__u16 x)
+ *
+ * Conversion of XX-bit integers (16- 32- or 64-)
+ * between native CPU format and little/big endian format
+ * 64-bit stuff only defined for proper architectures
+ *	cpu_to_[bl]eXX(__uXX x)
+ *	[bl]eXX_to_cpu(__uXX x)
+ *
+ * The same, but takes a pointer to the value to convert
+ *	cpu_to_[bl]eXXp(__uXX x)
+ *	[bl]eXX_to_cpup(__uXX x)
+ *
+ * The same, but change in situ
+ *	cpu_to_[bl]eXXs(__uXX x)
+ *	[bl]eXX_to_cpus(__uXX x)
+ *
+ * See asm-foo/byteorder.h for examples of how to provide
+ * architecture-optimized versions
+ *
+ */
+
+#define cpu_to_le64 __cpu_to_le64
+#define le64_to_cpu __le64_to_cpu
+#define cpu_to_le32 __cpu_to_le32
+#define le32_to_cpu __le32_to_cpu
+#define cpu_to_le16 __cpu_to_le16
+#define le16_to_cpu __le16_to_cpu
+#define cpu_to_be64 __cpu_to_be64
+#define be64_to_cpu __be64_to_cpu
+#define cpu_to_be32 __cpu_to_be32
+#define be32_to_cpu __be32_to_cpu
+#define cpu_to_be16 __cpu_to_be16
+#define be16_to_cpu __be16_to_cpu
+#define cpu_to_le64p __cpu_to_le64p
+#define le64_to_cpup __le64_to_cpup
+#define cpu_to_le32p __cpu_to_le32p
+#define le32_to_cpup __le32_to_cpup
+#define cpu_to_le16p __cpu_to_le16p
+#define le16_to_cpup __le16_to_cpup
+#define cpu_to_be64p __cpu_to_be64p
+#define be64_to_cpup __be64_to_cpup
+#define cpu_to_be32p __cpu_to_be32p
+#define be32_to_cpup __be32_to_cpup
+#define cpu_to_be16p __cpu_to_be16p
+#define be16_to_cpup __be16_to_cpup
+#define cpu_to_le64s __cpu_to_le64s
+#define le64_to_cpus __le64_to_cpus
+#define cpu_to_le32s __cpu_to_le32s
+#define le32_to_cpus __le32_to_cpus
+#define cpu_to_le16s __cpu_to_le16s
+#define le16_to_cpus __le16_to_cpus
+#define cpu_to_be64s __cpu_to_be64s
+#define be64_to_cpus __be64_to_cpus
+#define cpu_to_be32s __cpu_to_be32s
+#define be32_to_cpus __be32_to_cpus
+#define cpu_to_be16s __cpu_to_be16s
+#define be16_to_cpus __be16_to_cpus
+
+/*
+ * They have to be macros in order to do the constant folding
+ * correctly - if the argument passed into a inline function
+ * it is no longer constant according to gcc..
+ */
+
+#undef ntohl
+#undef ntohs
+#undef htonl
+#undef htons
+
+#define ___htonl(x) __cpu_to_be32(x)
+#define ___htons(x) __cpu_to_be16(x)
+#define ___ntohl(x) __be32_to_cpu(x)
+#define ___ntohs(x) __be16_to_cpu(x)
+
+#define htonl(x) ___htonl(x)
+#define ntohl(x) ___ntohl(x)
+#define htons(x) ___htons(x)
+#define ntohs(x) ___ntohs(x)
+
+static inline void le16_add_cpu(__le16 *var, u16 val)
+{
+	*var = cpu_to_le16(le16_to_cpu(*var) + val);
+}
+
+static inline void le32_add_cpu(__le32 *var, u32 val)
+{
+	*var = cpu_to_le32(le32_to_cpu(*var) + val);
+}
+
+static inline void le64_add_cpu(__le64 *var, u64 val)
+{
+	*var = cpu_to_le64(le64_to_cpu(*var) + val);
+}
+
+static inline void be16_add_cpu(__be16 *var, u16 val)
+{
+	*var = cpu_to_be16(be16_to_cpu(*var) + val);
+}
+
+static inline void be32_add_cpu(__be32 *var, u32 val)
+{
+	*var = cpu_to_be32(be32_to_cpu(*var) + val);
+}
+
+static inline void be64_add_cpu(__be64 *var, u64 val)
+{
+	*var = cpu_to_be64(be64_to_cpu(*var) + val);
+}
+
+#endif /* _LINUX_BYTEORDER_GENERIC_H */
diff --git a/include/linux/byteorder/little_endian.h b/include/linux/byteorder/little_endian.h
new file mode 100644
index 00000000..83195fb8
--- /dev/null
+++ b/include/linux/byteorder/little_endian.h
@@ -0,0 +1,108 @@
+#ifndef _LINUX_BYTEORDER_LITTLE_ENDIAN_H
+#define _LINUX_BYTEORDER_LITTLE_ENDIAN_H
+
+#ifndef __LITTLE_ENDIAN
+#define __LITTLE_ENDIAN 1234
+#endif
+#ifndef __LITTLE_ENDIAN_BITFIELD
+#define __LITTLE_ENDIAN_BITFIELD
+#endif
+
+#include <linux/types.h>
+#include <linux/swab.h>
+
+#define __constant_htonl(x) ((__force __be32)___constant_swab32((x)))
+#define __constant_ntohl(x) ___constant_swab32((__force __be32)(x))
+#define __constant_htons(x) ((__force __be16)___constant_swab16((x)))
+#define __constant_ntohs(x) ___constant_swab16((__force __be16)(x))
+#define __constant_cpu_to_le64(x) ((__force __le64)(__u64)(x))
+#define __constant_le64_to_cpu(x) ((__force __u64)(__le64)(x))
+#define __constant_cpu_to_le32(x) ((__force __le32)(__u32)(x))
+#define __constant_le32_to_cpu(x) ((__force __u32)(__le32)(x))
+#define __constant_cpu_to_le16(x) ((__force __le16)(__u16)(x))
+#define __constant_le16_to_cpu(x) ((__force __u16)(__le16)(x))
+#define __constant_cpu_to_be64(x) ((__force __be64)___constant_swab64((x)))
+#define __constant_be64_to_cpu(x) ___constant_swab64((__force __u64)(__be64)(x))
+#define __constant_cpu_to_be32(x) ((__force __be32)___constant_swab32((x)))
+#define __constant_be32_to_cpu(x) ___constant_swab32((__force __u32)(__be32)(x))
+#define __constant_cpu_to_be16(x) ((__force __be16)___constant_swab16((x)))
+#define __constant_be16_to_cpu(x) ___constant_swab16((__force __u16)(__be16)(x))
+#define __cpu_to_le64(x) ((__force __le64)(__u64)(x))
+#define __le64_to_cpu(x) ((__force __u64)(__le64)(x))
+#define __cpu_to_le32(x) ((__force __le32)(__u32)(x))
+#define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
+#define __cpu_to_le16(x) ((__force __le16)(__u16)(x))
+#define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
+#define __cpu_to_be64(x) ((__force __be64)__swab64((x)))
+#define __be64_to_cpu(x) __swab64((__force __u64)(__be64)(x))
+#define __cpu_to_be32(x) ((__force __be32)__swab32((x)))
+#define __be32_to_cpu(x) __swab32((__force __u32)(__be32)(x))
+#define __cpu_to_be16(x) ((__force __be16)__swab16((x)))
+#define __be16_to_cpu(x) __swab16((__force __u16)(__be16)(x))
+
+static inline __le64 __cpu_to_le64p(const __u64 *p)
+{
+	return (__force __le64)*p;
+}
+static inline __u64 __le64_to_cpup(const __le64 *p)
+{
+	return (__force __u64)*p;
+}
+static inline __le32 __cpu_to_le32p(const __u32 *p)
+{
+	return (__force __le32)*p;
+}
+static inline __u32 __le32_to_cpup(const __le32 *p)
+{
+	return (__force __u32)*p;
+}
+static inline __le16 __cpu_to_le16p(const __u16 *p)
+{
+	return (__force __le16)*p;
+}
+static inline __u16 __le16_to_cpup(const __le16 *p)
+{
+	return (__force __u16)*p;
+}
+static inline __be64 __cpu_to_be64p(const __u64 *p)
+{
+	return (__force __be64)__swab64p(p);
+}
+static inline __u64 __be64_to_cpup(const __be64 *p)
+{
+	return __swab64p((__u64 *)p);
+}
+static inline __be32 __cpu_to_be32p(const __u32 *p)
+{
+	return (__force __be32)__swab32p(p);
+}
+static inline __u32 __be32_to_cpup(const __be32 *p)
+{
+	return __swab32p((__u32 *)p);
+}
+static inline __be16 __cpu_to_be16p(const __u16 *p)
+{
+	return (__force __be16)__swab16p(p);
+}
+static inline __u16 __be16_to_cpup(const __be16 *p)
+{
+	return __swab16p((__u16 *)p);
+}
+#define __cpu_to_le64s(x) do { (void)(x); } while (0)
+#define __le64_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_le32s(x) do { (void)(x); } while (0)
+#define __le32_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_le16s(x) do { (void)(x); } while (0)
+#define __le16_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_be64s(x) __swab64s((x))
+#define __be64_to_cpus(x) __swab64s((x))
+#define __cpu_to_be32s(x) __swab32s((x))
+#define __be32_to_cpus(x) __swab32s((x))
+#define __cpu_to_be16s(x) __swab16s((x))
+#define __be16_to_cpus(x) __swab16s((x))
+
+#ifdef __KERNEL__
+#include <linux/byteorder/generic.h>
+#endif
+
+#endif /* _LINUX_BYTEORDER_LITTLE_ENDIAN_H */
diff --git a/include/linux/c2port.h b/include/linux/c2port.h
new file mode 100644
index 00000000..4efabcb5
--- /dev/null
+++ b/include/linux/c2port.h
@@ -0,0 +1,66 @@
+/*
+ *  Silicon Labs C2 port Linux support
+ *
+ *  Copyright (c) 2007 Rodolfo Giometti <giometti@linux.it>
+ *  Copyright (c) 2007 Eurotech S.p.A. <info@eurotech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation
+ */
+
+#include <linux/kmemcheck.h>
+
+#define C2PORT_NAME_LEN			32
+
+struct device;
+
+/*
+ * C2 port basic structs
+ */
+
+/* Main struct */
+struct c2port_ops;
+struct c2port_device {
+	kmemcheck_bitfield_begin(flags);
+	unsigned int access:1;
+	unsigned int flash_access:1;
+	kmemcheck_bitfield_end(flags);
+
+	int id;
+	char name[C2PORT_NAME_LEN];
+	struct c2port_ops *ops;
+	struct mutex mutex;		/* prevent races during read/write */
+
+	struct device *dev;
+
+	void *private_data;
+};
+
+/* Basic operations */
+struct c2port_ops {
+	/* Flash layout */
+	unsigned short block_size;	/* flash block size in bytes */
+	unsigned short blocks_num;	/* flash blocks number */
+
+	/* Enable or disable the access to C2 port */
+	void (*access)(struct c2port_device *dev, int status);
+
+	/* Set C2D data line as input/output */
+	void (*c2d_dir)(struct c2port_device *dev, int dir);
+
+	/* Read/write C2D data line */
+	int (*c2d_get)(struct c2port_device *dev);
+	void (*c2d_set)(struct c2port_device *dev, int status);
+
+	/* Write C2CK clock line */
+	void (*c2ck_set)(struct c2port_device *dev, int status);
+};
+
+/*
+ * Exported functions
+ */
+
+extern struct c2port_device *c2port_device_register(char *name,
+					struct c2port_ops *ops, void *devdata);
+extern void c2port_device_unregister(struct c2port_device *dev);
diff --git a/include/linux/cache.h b/include/linux/cache.h
new file mode 100644
index 00000000..4c570653
--- /dev/null
+++ b/include/linux/cache.h
@@ -0,0 +1,67 @@
+#ifndef __LINUX_CACHE_H
+#define __LINUX_CACHE_H
+
+#include <linux/kernel.h>
+#include <asm/cache.h>
+
+#ifndef L1_CACHE_ALIGN
+#define L1_CACHE_ALIGN(x) ALIGN(x, L1_CACHE_BYTES)
+#endif
+
+#ifndef SMP_CACHE_BYTES
+#define SMP_CACHE_BYTES L1_CACHE_BYTES
+#endif
+
+#ifndef __read_mostly
+#define __read_mostly
+#endif
+
+#ifndef ____cacheline_aligned
+#define ____cacheline_aligned __attribute__((__aligned__(SMP_CACHE_BYTES)))
+#endif
+
+#ifndef ____cacheline_aligned_in_smp
+#ifdef CONFIG_SMP
+#define ____cacheline_aligned_in_smp ____cacheline_aligned
+#else
+#define ____cacheline_aligned_in_smp
+#endif /* CONFIG_SMP */
+#endif
+
+#ifndef __cacheline_aligned
+#define __cacheline_aligned					\
+  __attribute__((__aligned__(SMP_CACHE_BYTES),			\
+		 __section__(".data..cacheline_aligned")))
+#endif /* __cacheline_aligned */
+
+#ifndef __cacheline_aligned_in_smp
+#ifdef CONFIG_SMP
+#define __cacheline_aligned_in_smp __cacheline_aligned
+#else
+#define __cacheline_aligned_in_smp
+#endif /* CONFIG_SMP */
+#endif
+
+/*
+ * The maximum alignment needed for some critical structures
+ * These could be inter-node cacheline sizes/L3 cacheline
+ * size etc.  Define this in asm/cache.h for your arch
+ */
+#ifndef INTERNODE_CACHE_SHIFT
+#define INTERNODE_CACHE_SHIFT L1_CACHE_SHIFT
+#endif
+
+#if !defined(____cacheline_internodealigned_in_smp)
+#if defined(CONFIG_SMP)
+#define ____cacheline_internodealigned_in_smp \
+	__attribute__((__aligned__(1 << (INTERNODE_CACHE_SHIFT))))
+#else
+#define ____cacheline_internodealigned_in_smp
+#endif
+#endif
+
+#ifndef CONFIG_ARCH_HAS_CACHE_LINE_SIZE
+#define cache_line_size()	L1_CACHE_BYTES
+#endif
+
+#endif /* __LINUX_CACHE_H */
diff --git a/include/linux/caif/Kbuild b/include/linux/caif/Kbuild
new file mode 100644
index 00000000..a9cf2506
--- /dev/null
+++ b/include/linux/caif/Kbuild
@@ -0,0 +1,2 @@
+header-y += caif_socket.h
+header-y += if_caif.h
diff --git a/include/linux/caif/caif_socket.h b/include/linux/caif/caif_socket.h
new file mode 100644
index 00000000..3f3bac6a
--- /dev/null
+++ b/include/linux/caif/caif_socket.h
@@ -0,0 +1,194 @@
+/* linux/caif_socket.h
+ * CAIF Definitions for CAIF socket and network layer
+ * Copyright (C) ST-Ericsson AB 2010
+ * Author:	 Sjur Brendeland/ sjur.brandeland@stericsson.com
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef _LINUX_CAIF_SOCKET_H
+#define _LINUX_CAIF_SOCKET_H
+
+#include <linux/types.h>
+#include <linux/socket.h>
+
+/**
+ * enum caif_link_selector -    Physical Link Selection.
+ * @CAIF_LINK_HIGH_BANDW:	Physical interface for high-bandwidth
+ *				traffic.
+ * @CAIF_LINK_LOW_LATENCY:	Physical interface for low-latency
+ *				traffic.
+ *
+ * CAIF Link Layers can register their link properties.
+ * This enum is used for choosing between CAIF Link Layers when
+ * setting up CAIF Channels when multiple CAIF Link Layers exists.
+ */
+enum caif_link_selector {
+	CAIF_LINK_HIGH_BANDW,
+	CAIF_LINK_LOW_LATENCY
+};
+
+/**
+ * enum caif_channel_priority - CAIF channel priorities.
+ *
+ * @CAIF_PRIO_MIN:	Min priority for a channel.
+ * @CAIF_PRIO_LOW:	Low-priority channel.
+ * @CAIF_PRIO_NORMAL:	Normal/default priority level.
+ * @CAIF_PRIO_HIGH:	High priority level
+ * @CAIF_PRIO_MAX:	Max priority for channel
+ *
+ * Priority can be set on CAIF Channels in order to
+ * prioritize between traffic on different CAIF Channels.
+ * These priority levels are recommended, but the priority value
+ * is not restricted to the values defined in this enum, any value
+ * between CAIF_PRIO_MIN and CAIF_PRIO_MAX could be used.
+ */
+enum caif_channel_priority {
+	CAIF_PRIO_MIN	 = 0x01,
+	CAIF_PRIO_LOW	 = 0x04,
+	CAIF_PRIO_NORMAL = 0x0f,
+	CAIF_PRIO_HIGH	 = 0x14,
+	CAIF_PRIO_MAX	 = 0x1F
+};
+
+/**
+ * enum caif_protocol_type  -	CAIF Channel type.
+ * @CAIFPROTO_AT:		Classic AT channel.
+ * @CAIFPROTO_DATAGRAM:	Datagram channel.
+ * @CAIFPROTO_DATAGRAM_LOOP:	Datagram loopback channel, used for testing.
+ * @CAIFPROTO_UTIL:		Utility (Psock) channel.
+ * @CAIFPROTO_RFM:		Remote File Manager
+ * @CAIFPROTO_DEBUG:		Debug link
+ *
+ * This enum defines the CAIF Channel type to be used. This defines
+ * the service to connect to on the modem.
+ */
+enum caif_protocol_type {
+	CAIFPROTO_AT,
+	CAIFPROTO_DATAGRAM,
+	CAIFPROTO_DATAGRAM_LOOP,
+	CAIFPROTO_UTIL,
+	CAIFPROTO_RFM,
+	CAIFPROTO_DEBUG,
+	_CAIFPROTO_MAX
+};
+#define	CAIFPROTO_MAX _CAIFPROTO_MAX
+
+/**
+ * enum caif_at_type - AT Service Endpoint
+ * @CAIF_ATTYPE_PLAIN:	     Connects to a plain vanilla AT channel.
+ */
+enum caif_at_type {
+	CAIF_ATTYPE_PLAIN = 2
+};
+ /**
+ * enum caif_debug_type - Content selection for debug connection
+ * @CAIF_DEBUG_TRACE_INTERACTIVE: Connection will contain
+ *				both trace and interactive debug.
+ * @CAIF_DEBUG_TRACE:		Connection contains trace only.
+ * @CAIF_DEBUG_INTERACTIVE:	Connection to interactive debug.
+ */
+enum caif_debug_type {
+	CAIF_DEBUG_TRACE_INTERACTIVE = 0,
+	CAIF_DEBUG_TRACE,
+	CAIF_DEBUG_INTERACTIVE,
+};
+
+/**
+ * enum caif_debug_service - Debug Service Endpoint
+ * @CAIF_RADIO_DEBUG_SERVICE:	Debug service on the Radio sub-system
+ * @CAIF_APP_DEBUG_SERVICE:	Debug for the applications sub-system
+ */
+enum caif_debug_service {
+	CAIF_RADIO_DEBUG_SERVICE = 1,
+	CAIF_APP_DEBUG_SERVICE
+};
+
+/**
+ * struct sockaddr_caif - the sockaddr structure for CAIF sockets.
+ * @family:		     Address family number, must be AF_CAIF.
+ * @u:			     Union of address data 'switched' by family.
+ * :
+ * @u.at:                    Applies when family = CAIFPROTO_AT.
+ *
+ * @u.at.type:               Type of AT link to set up (enum caif_at_type).
+ *
+ * @u.util:                  Applies when family = CAIFPROTO_UTIL
+ *
+ * @u.util.service:          Utility service name.
+ *
+ * @u.dgm:                   Applies when family = CAIFPROTO_DATAGRAM
+ *
+ * @u.dgm.connection_id:     Datagram connection id.
+ *
+ * @u.dgm.nsapi:             NSAPI of the PDP-Context.
+ *
+ * @u.rfm:                   Applies when family = CAIFPROTO_RFM
+ *
+ * @u.rfm.connection_id:     Connection ID for RFM.
+ *
+ * @u.rfm.volume:            Volume to mount.
+ *
+ * @u.dbg:		      Applies when family = CAIFPROTO_DEBUG.
+ *
+ * @u.dbg.type:			     Type of debug connection to set up
+ *			      (caif_debug_type).
+ *
+ * @u.dbg.service:	      Service sub-system to connect (caif_debug_service
+ * Description:
+ * This structure holds the connect parameters used for setting up a
+ * CAIF Channel. It defines the service to connect to on the modem.
+ */
+struct sockaddr_caif {
+	__kernel_sa_family_t  family;
+	union {
+		struct {
+			__u8  type;		/* type: enum caif_at_type */
+		} at;				/* CAIFPROTO_AT */
+		struct {
+			char	  service[16];
+		} util;				/* CAIFPROTO_UTIL */
+		union {
+			__u32 connection_id;
+			__u8  nsapi;
+		} dgm;				/* CAIFPROTO_DATAGRAM(_LOOP)*/
+		struct {
+			__u32 connection_id;
+			char	  volume[16];
+		} rfm;				/* CAIFPROTO_RFM */
+		struct {
+			__u8  type;		/* type:enum caif_debug_type */
+			__u8  service;		/* service:caif_debug_service */
+		} dbg;				/* CAIFPROTO_DEBUG */
+	} u;
+};
+
+/**
+ * enum caif_socket_opts - CAIF option values for getsockopt and setsockopt.
+ *
+ * @CAIFSO_LINK_SELECT:		Selector used if multiple CAIF Link layers are
+ *				available. Either a high bandwidth
+ *				link can be selected (CAIF_LINK_HIGH_BANDW) or
+ *				or a low latency link (CAIF_LINK_LOW_LATENCY).
+ *                              This option is of type __u32.
+ *				Alternatively SO_BINDTODEVICE can be used.
+ *
+ * @CAIFSO_REQ_PARAM:		Used to set the request parameters for a
+ *				utility channel. (maximum 256 bytes). This
+ *				option must be set before connecting.
+ *
+ * @CAIFSO_RSP_PARAM:		Gets the response parameters for a utility
+ *				channel. (maximum 256 bytes). This option
+ *				is valid after a successful connect.
+ *
+ *
+ * This enum defines the CAIF Socket options to be used on a socket
+ * of type PF_CAIF.
+ *
+ */
+enum caif_socket_opts {
+	CAIFSO_LINK_SELECT	= 127,
+	CAIFSO_REQ_PARAM	= 128,
+	CAIFSO_RSP_PARAM	= 129,
+};
+
+#endif /* _LINUX_CAIF_SOCKET_H */
diff --git a/include/linux/caif/if_caif.h b/include/linux/caif/if_caif.h
new file mode 100644
index 00000000..5e7eed4e
--- /dev/null
+++ b/include/linux/caif/if_caif.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) ST-Ericsson AB 2010
+ * Author:	Sjur Brendeland/ sjur.brandeland@stericsson.com
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef IF_CAIF_H_
+#define IF_CAIF_H_
+#include <linux/sockios.h>
+#include <linux/types.h>
+#include <linux/socket.h>
+
+/**
+ * enum ifla_caif - CAIF NetlinkRT parameters.
+ * @IFLA_CAIF_IPV4_CONNID:  Connection ID for IPv4 PDP Context.
+ *			    The type of attribute is NLA_U32.
+ * @IFLA_CAIF_IPV6_CONNID:  Connection ID for IPv6 PDP Context.
+ *			    The type of attribute is NLA_U32.
+ * @IFLA_CAIF_LOOPBACK:	    If different from zero, device is doing loopback
+ *			    The type of attribute is NLA_U8.
+ *
+ * When using RT Netlink to create, destroy or configure a CAIF IP interface,
+ * enum ifla_caif is used to specify the configuration attributes.
+ */
+enum ifla_caif {
+	__IFLA_CAIF_UNSPEC,
+	IFLA_CAIF_IPV4_CONNID,
+	IFLA_CAIF_IPV6_CONNID,
+	IFLA_CAIF_LOOPBACK,
+	__IFLA_CAIF_MAX
+};
+#define	IFLA_CAIF_MAX (__IFLA_CAIF_MAX-1)
+
+#endif /*IF_CAIF_H_*/
diff --git a/include/linux/can.h b/include/linux/can.h
new file mode 100644
index 00000000..9a19bcb3
--- /dev/null
+++ b/include/linux/can.h
@@ -0,0 +1,109 @@
+/*
+ * linux/can.h
+ *
+ * Definitions for CAN network layer (socket addr / CAN frame / CAN filter)
+ *
+ * Authors: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
+ *          Urs Thuermann   <urs.thuermann@volkswagen.de>
+ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
+ * All rights reserved.
+ *
+ */
+
+#ifndef CAN_H
+#define CAN_H
+
+#include <linux/types.h>
+#include <linux/socket.h>
+
+/* controller area network (CAN) kernel definitions */
+
+/* special address description flags for the CAN_ID */
+#define CAN_EFF_FLAG 0x80000000U /* EFF/SFF is set in the MSB */
+#define CAN_RTR_FLAG 0x40000000U /* remote transmission request */
+#define CAN_ERR_FLAG 0x20000000U /* error frame */
+
+/* valid bits in CAN ID for frame formats */
+#define CAN_SFF_MASK 0x000007FFU /* standard frame format (SFF) */
+#define CAN_EFF_MASK 0x1FFFFFFFU /* extended frame format (EFF) */
+#define CAN_ERR_MASK 0x1FFFFFFFU /* omit EFF, RTR, ERR flags */
+
+/*
+ * Controller Area Network Identifier structure
+ *
+ * bit 0-28	: CAN identifier (11/29 bit)
+ * bit 29	: error frame flag (0 = data frame, 1 = error frame)
+ * bit 30	: remote transmission request flag (1 = rtr frame)
+ * bit 31	: frame format flag (0 = standard 11 bit, 1 = extended 29 bit)
+ */
+typedef __u32 canid_t;
+
+/*
+ * Controller Area Network Error Frame Mask structure
+ *
+ * bit 0-28	: error class mask (see include/linux/can/error.h)
+ * bit 29-31	: set to zero
+ */
+typedef __u32 can_err_mask_t;
+
+/**
+ * struct can_frame - basic CAN frame structure
+ * @can_id:  the CAN ID of the frame and CAN_*_FLAG flags, see above.
+ * @can_dlc: the data length field of the CAN frame
+ * @data:    the CAN frame payload.
+ */
+struct can_frame {
+	canid_t can_id;  /* 32 bit CAN_ID + EFF/RTR/ERR flags */
+	__u8    can_dlc; /* data length code: 0 .. 8 */
+	__u8    data[8] __attribute__((aligned(8)));
+};
+
+/* particular protocols of the protocol family PF_CAN */
+#define CAN_RAW		1 /* RAW sockets */
+#define CAN_BCM		2 /* Broadcast Manager */
+#define CAN_TP16	3 /* VAG Transport Protocol v1.6 */
+#define CAN_TP20	4 /* VAG Transport Protocol v2.0 */
+#define CAN_MCNET	5 /* Bosch MCNet */
+#define CAN_ISOTP	6 /* ISO 15765-2 Transport Protocol */
+#define CAN_NPROTO	7
+
+#define SOL_CAN_BASE 100
+
+/**
+ * struct sockaddr_can - the sockaddr structure for CAN sockets
+ * @can_family:  address family number AF_CAN.
+ * @can_ifindex: CAN network interface index.
+ * @can_addr:    protocol specific address information
+ */
+struct sockaddr_can {
+	__kernel_sa_family_t can_family;
+	int         can_ifindex;
+	union {
+		/* transport protocol class address information (e.g. ISOTP) */
+		struct { canid_t rx_id, tx_id; } tp;
+
+		/* reserved for future CAN protocols address information */
+	} can_addr;
+};
+
+/**
+ * struct can_filter - CAN ID based filter in can_register().
+ * @can_id:   relevant bits of CAN ID which are not masked out.
+ * @can_mask: CAN mask (see description)
+ *
+ * Description:
+ * A filter matches, when
+ *
+ *          <received_can_id> & mask == can_id & mask
+ *
+ * The filter can be inverted (CAN_INV_FILTER bit set in can_id) or it can
+ * filter for error frames (CAN_ERR_FLAG bit set in mask).
+ */
+struct can_filter {
+	canid_t can_id;
+	canid_t can_mask;
+};
+
+#define CAN_INV_FILTER 0x20000000U /* to be set in can_filter.can_id */
+
+#endif /* CAN_H */
diff --git a/include/linux/can/Kbuild b/include/linux/can/Kbuild
new file mode 100644
index 00000000..c62b7f17
--- /dev/null
+++ b/include/linux/can/Kbuild
@@ -0,0 +1,5 @@
+header-y += raw.h
+header-y += bcm.h
+header-y += gw.h
+header-y += error.h
+header-y += netlink.h
diff --git a/include/linux/can/bcm.h b/include/linux/can/bcm.h
new file mode 100644
index 00000000..3ebe387f
--- /dev/null
+++ b/include/linux/can/bcm.h
@@ -0,0 +1,66 @@
+/*
+ * linux/can/bcm.h
+ *
+ * Definitions for CAN Broadcast Manager (BCM)
+ *
+ * Author: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
+ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
+ * All rights reserved.
+ *
+ */
+
+#ifndef CAN_BCM_H
+#define CAN_BCM_H
+
+#include <linux/types.h>
+#include <linux/can.h>
+
+/**
+ * struct bcm_msg_head - head of messages to/from the broadcast manager
+ * @opcode:    opcode, see enum below.
+ * @flags:     special flags, see below.
+ * @count:     number of frames to send before changing interval.
+ * @ival1:     interval for the first @count frames.
+ * @ival2:     interval for the following frames.
+ * @can_id:    CAN ID of frames to be sent or received.
+ * @nframes:   number of frames appended to the message head.
+ * @frames:    array of CAN frames.
+ */
+struct bcm_msg_head {
+	__u32 opcode;
+	__u32 flags;
+	__u32 count;
+	struct timeval ival1, ival2;
+	canid_t can_id;
+	__u32 nframes;
+	struct can_frame frames[0];
+};
+
+enum {
+	TX_SETUP = 1,	/* create (cyclic) transmission task */
+	TX_DELETE,	/* remove (cyclic) transmission task */
+	TX_READ,	/* read properties of (cyclic) transmission task */
+	TX_SEND,	/* send one CAN frame */
+	RX_SETUP,	/* create RX content filter subscription */
+	RX_DELETE,	/* remove RX content filter subscription */
+	RX_READ,	/* read properties of RX content filter subscription */
+	TX_STATUS,	/* reply to TX_READ request */
+	TX_EXPIRED,	/* notification on performed transmissions (count=0) */
+	RX_STATUS,	/* reply to RX_READ request */
+	RX_TIMEOUT,	/* cyclic message is absent */
+	RX_CHANGED	/* updated CAN frame (detected content change) */
+};
+
+#define SETTIMER            0x0001
+#define STARTTIMER          0x0002
+#define TX_COUNTEVT         0x0004
+#define TX_ANNOUNCE         0x0008
+#define TX_CP_CAN_ID        0x0010
+#define RX_FILTER_ID        0x0020
+#define RX_CHECK_DLC        0x0040
+#define RX_NO_AUTOTIMER     0x0080
+#define RX_ANNOUNCE_RESUME  0x0100
+#define TX_RESET_MULTI_IDX  0x0200
+#define RX_RTR_FRAME        0x0400
+
+#endif /* CAN_BCM_H */
diff --git a/include/linux/can/core.h b/include/linux/can/core.h
new file mode 100644
index 00000000..0ccc1cd2
--- /dev/null
+++ b/include/linux/can/core.h
@@ -0,0 +1,61 @@
+/*
+ * linux/can/core.h
+ *
+ * Protoypes and definitions for CAN protocol modules using the PF_CAN core
+ *
+ * Authors: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
+ *          Urs Thuermann   <urs.thuermann@volkswagen.de>
+ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
+ * All rights reserved.
+ *
+ */
+
+#ifndef CAN_CORE_H
+#define CAN_CORE_H
+
+#include <linux/can.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+
+#define CAN_VERSION "20090105"
+
+/* increment this number each time you change some user-space interface */
+#define CAN_ABI_VERSION "8"
+
+#define CAN_VERSION_STRING "rev " CAN_VERSION " abi " CAN_ABI_VERSION
+
+#define DNAME(dev) ((dev) ? (dev)->name : "any")
+
+/**
+ * struct can_proto - CAN protocol structure
+ * @type:       type argument in socket() syscall, e.g. SOCK_DGRAM.
+ * @protocol:   protocol number in socket() syscall.
+ * @ops:        pointer to struct proto_ops for sock->ops.
+ * @prot:       pointer to struct proto structure.
+ */
+struct can_proto {
+	int type;
+	int protocol;
+	const struct proto_ops *ops;
+	struct proto *prot;
+};
+
+/* function prototypes for the CAN networklayer core (af_can.c) */
+
+extern int  can_proto_register(const struct can_proto *cp);
+extern void can_proto_unregister(const struct can_proto *cp);
+
+extern int  can_rx_register(struct net_device *dev, canid_t can_id,
+			    canid_t mask,
+			    void (*func)(struct sk_buff *, void *),
+			    void *data, char *ident);
+
+extern void can_rx_unregister(struct net_device *dev, canid_t can_id,
+			      canid_t mask,
+			      void (*func)(struct sk_buff *, void *),
+			      void *data);
+
+extern int can_send(struct sk_buff *skb, int loop);
+extern int can_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg);
+
+#endif /* CAN_CORE_H */
diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
new file mode 100644
index 00000000..5d2efe7e
--- /dev/null
+++ b/include/linux/can/dev.h
@@ -0,0 +1,102 @@
+/*
+ * linux/can/dev.h
+ *
+ * Definitions for the CAN network device driver interface
+ *
+ * Copyright (C) 2006 Andrey Volkov <avolkov@varma-el.com>
+ *               Varma Electronics Oy
+ *
+ * Copyright (C) 2008 Wolfgang Grandegger <wg@grandegger.com>
+ *
+ */
+
+#ifndef CAN_DEV_H
+#define CAN_DEV_H
+
+#include <linux/can.h>
+#include <linux/can/netlink.h>
+#include <linux/can/error.h>
+
+/*
+ * CAN mode
+ */
+enum can_mode {
+	CAN_MODE_STOP = 0,
+	CAN_MODE_START,
+	CAN_MODE_SLEEP
+};
+
+/*
+ * CAN common private data
+ */
+struct can_priv {
+	struct can_device_stats can_stats;
+
+	struct can_bittiming bittiming;
+	struct can_bittiming_const *bittiming_const;
+	struct can_clock clock;
+
+	enum can_state state;
+	u32 ctrlmode;
+	u32 ctrlmode_supported;
+
+	int restart_ms;
+	struct timer_list restart_timer;
+
+	int (*do_set_bittiming)(struct net_device *dev);
+	int (*do_set_mode)(struct net_device *dev, enum can_mode mode);
+	int (*do_get_state)(const struct net_device *dev,
+			    enum can_state *state);
+	int (*do_get_berr_counter)(const struct net_device *dev,
+				   struct can_berr_counter *bec);
+
+	unsigned int echo_skb_max;
+	struct sk_buff **echo_skb;
+};
+
+/*
+ * get_can_dlc(value) - helper macro to cast a given data length code (dlc)
+ * to __u8 and ensure the dlc value to be max. 8 bytes.
+ *
+ * To be used in the CAN netdriver receive path to ensure conformance with
+ * ISO 11898-1 Chapter 8.4.2.3 (DLC field)
+ */
+#define get_can_dlc(i)	(min_t(__u8, (i), 8))
+
+/* Drop a given socketbuffer if it does not contain a valid CAN frame. */
+static inline int can_dropped_invalid_skb(struct net_device *dev,
+					  struct sk_buff *skb)
+{
+	const struct can_frame *cf = (struct can_frame *)skb->data;
+
+	if (unlikely(skb->len != sizeof(*cf) || cf->can_dlc > 8)) {
+		kfree_skb(skb);
+		dev->stats.tx_dropped++;
+		return 1;
+	}
+
+	return 0;
+}
+
+struct net_device *alloc_candev(int sizeof_priv, unsigned int echo_skb_max);
+void free_candev(struct net_device *dev);
+
+int open_candev(struct net_device *dev);
+void close_candev(struct net_device *dev);
+
+int register_candev(struct net_device *dev);
+void unregister_candev(struct net_device *dev);
+
+int can_restart_now(struct net_device *dev);
+void can_bus_off(struct net_device *dev);
+
+void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
+		      unsigned int idx);
+unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx);
+void can_free_echo_skb(struct net_device *dev, unsigned int idx);
+
+struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf);
+struct sk_buff *alloc_can_err_skb(struct net_device *dev,
+				  struct can_frame **cf);
+
+#endif /* CAN_DEV_H */
diff --git a/include/linux/can/error.h b/include/linux/can/error.h
new file mode 100644
index 00000000..63e855ea
--- /dev/null
+++ b/include/linux/can/error.h
@@ -0,0 +1,91 @@
+/*
+ * linux/can/error.h
+ *
+ * Definitions of the CAN error frame to be filtered and passed to the user.
+ *
+ * Author: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
+ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
+ * All rights reserved.
+ *
+ */
+
+#ifndef CAN_ERROR_H
+#define CAN_ERROR_H
+
+#define CAN_ERR_DLC 8 /* dlc for error frames */
+
+/* error class (mask) in can_id */
+#define CAN_ERR_TX_TIMEOUT   0x00000001U /* TX timeout (by netdevice driver) */
+#define CAN_ERR_LOSTARB      0x00000002U /* lost arbitration    / data[0]    */
+#define CAN_ERR_CRTL         0x00000004U /* controller problems / data[1]    */
+#define CAN_ERR_PROT         0x00000008U /* protocol violations / data[2..3] */
+#define CAN_ERR_TRX          0x00000010U /* transceiver status  / data[4]    */
+#define CAN_ERR_ACK          0x00000020U /* received no ACK on transmission */
+#define CAN_ERR_BUSOFF       0x00000040U /* bus off */
+#define CAN_ERR_BUSERROR     0x00000080U /* bus error (may flood!) */
+#define CAN_ERR_RESTARTED    0x00000100U /* controller restarted */
+
+/* arbitration lost in bit ... / data[0] */
+#define CAN_ERR_LOSTARB_UNSPEC   0x00 /* unspecified */
+				      /* else bit number in bitstream */
+
+/* error status of CAN-controller / data[1] */
+#define CAN_ERR_CRTL_UNSPEC      0x00 /* unspecified */
+#define CAN_ERR_CRTL_RX_OVERFLOW 0x01 /* RX buffer overflow */
+#define CAN_ERR_CRTL_TX_OVERFLOW 0x02 /* TX buffer overflow */
+#define CAN_ERR_CRTL_RX_WARNING  0x04 /* reached warning level for RX errors */
+#define CAN_ERR_CRTL_TX_WARNING  0x08 /* reached warning level for TX errors */
+#define CAN_ERR_CRTL_RX_PASSIVE  0x10 /* reached error passive status RX */
+#define CAN_ERR_CRTL_TX_PASSIVE  0x20 /* reached error passive status TX */
+				      /* (at least one error counter exceeds */
+				      /* the protocol-defined level of 127)  */
+
+/* error in CAN protocol (type) / data[2] */
+#define CAN_ERR_PROT_UNSPEC      0x00 /* unspecified */
+#define CAN_ERR_PROT_BIT         0x01 /* single bit error */
+#define CAN_ERR_PROT_FORM        0x02 /* frame format error */
+#define CAN_ERR_PROT_STUFF       0x04 /* bit stuffing error */
+#define CAN_ERR_PROT_BIT0        0x08 /* unable to send dominant bit */
+#define CAN_ERR_PROT_BIT1        0x10 /* unable to send recessive bit */
+#define CAN_ERR_PROT_OVERLOAD    0x20 /* bus overload */
+#define CAN_ERR_PROT_ACTIVE      0x40 /* active error announcement */
+#define CAN_ERR_PROT_TX          0x80 /* error occurred on transmission */
+
+/* error in CAN protocol (location) / data[3] */
+#define CAN_ERR_PROT_LOC_UNSPEC  0x00 /* unspecified */
+#define CAN_ERR_PROT_LOC_SOF     0x03 /* start of frame */
+#define CAN_ERR_PROT_LOC_ID28_21 0x02 /* ID bits 28 - 21 (SFF: 10 - 3) */
+#define CAN_ERR_PROT_LOC_ID20_18 0x06 /* ID bits 20 - 18 (SFF: 2 - 0 )*/
+#define CAN_ERR_PROT_LOC_SRTR    0x04 /* substitute RTR (SFF: RTR) */
+#define CAN_ERR_PROT_LOC_IDE     0x05 /* identifier extension */
+#define CAN_ERR_PROT_LOC_ID17_13 0x07 /* ID bits 17-13 */
+#define CAN_ERR_PROT_LOC_ID12_05 0x0F /* ID bits 12-5 */
+#define CAN_ERR_PROT_LOC_ID04_00 0x0E /* ID bits 4-0 */
+#define CAN_ERR_PROT_LOC_RTR     0x0C /* RTR */
+#define CAN_ERR_PROT_LOC_RES1    0x0D /* reserved bit 1 */
+#define CAN_ERR_PROT_LOC_RES0    0x09 /* reserved bit 0 */
+#define CAN_ERR_PROT_LOC_DLC     0x0B /* data length code */
+#define CAN_ERR_PROT_LOC_DATA    0x0A /* data section */
+#define CAN_ERR_PROT_LOC_CRC_SEQ 0x08 /* CRC sequence */
+#define CAN_ERR_PROT_LOC_CRC_DEL 0x18 /* CRC delimiter */
+#define CAN_ERR_PROT_LOC_ACK     0x19 /* ACK slot */
+#define CAN_ERR_PROT_LOC_ACK_DEL 0x1B /* ACK delimiter */
+#define CAN_ERR_PROT_LOC_EOF     0x1A /* end of frame */
+#define CAN_ERR_PROT_LOC_INTERM  0x12 /* intermission */
+
+/* error status of CAN-transceiver / data[4] */
+/*                                             CANH CANL */
+#define CAN_ERR_TRX_UNSPEC             0x00 /* 0000 0000 */
+#define CAN_ERR_TRX_CANH_NO_WIRE       0x04 /* 0000 0100 */
+#define CAN_ERR_TRX_CANH_SHORT_TO_BAT  0x05 /* 0000 0101 */
+#define CAN_ERR_TRX_CANH_SHORT_TO_VCC  0x06 /* 0000 0110 */
+#define CAN_ERR_TRX_CANH_SHORT_TO_GND  0x07 /* 0000 0111 */
+#define CAN_ERR_TRX_CANL_NO_WIRE       0x40 /* 0100 0000 */
+#define CAN_ERR_TRX_CANL_SHORT_TO_BAT  0x50 /* 0101 0000 */
+#define CAN_ERR_TRX_CANL_SHORT_TO_VCC  0x60 /* 0110 0000 */
+#define CAN_ERR_TRX_CANL_SHORT_TO_GND  0x70 /* 0111 0000 */
+#define CAN_ERR_TRX_CANL_SHORT_TO_CANH 0x80 /* 1000 0000 */
+
+/* controller specific additional information / data[5..7] */
+
+#endif /* CAN_ERROR_H */
diff --git a/include/linux/can/gw.h b/include/linux/can/gw.h
new file mode 100644
index 00000000..8e1db18c
--- /dev/null
+++ b/include/linux/can/gw.h
@@ -0,0 +1,162 @@
+/*
+ * linux/can/gw.h
+ *
+ * Definitions for CAN frame Gateway/Router/Bridge
+ *
+ * Author: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
+ * Copyright (c) 2011 Volkswagen Group Electronic Research
+ * All rights reserved.
+ *
+ */
+
+#ifndef CAN_GW_H
+#define CAN_GW_H
+
+#include <linux/types.h>
+#include <linux/can.h>
+
+struct rtcanmsg {
+	__u8  can_family;
+	__u8  gwtype;
+	__u16 flags;
+};
+
+/* CAN gateway types */
+enum {
+	CGW_TYPE_UNSPEC,
+	CGW_TYPE_CAN_CAN,	/* CAN->CAN routing */
+	__CGW_TYPE_MAX
+};
+
+#define CGW_TYPE_MAX (__CGW_TYPE_MAX - 1)
+
+/* CAN rtnetlink attribute definitions */
+enum {
+	CGW_UNSPEC,
+	CGW_MOD_AND,	/* CAN frame modification binary AND */
+	CGW_MOD_OR,	/* CAN frame modification binary OR */
+	CGW_MOD_XOR,	/* CAN frame modification binary XOR */
+	CGW_MOD_SET,	/* CAN frame modification set alternate values */
+	CGW_CS_XOR,	/* set data[] XOR checksum into data[index] */
+	CGW_CS_CRC8,	/* set data[] CRC8 checksum into data[index] */
+	CGW_HANDLED,	/* number of handled CAN frames */
+	CGW_DROPPED,	/* number of dropped CAN frames */
+	CGW_SRC_IF,	/* ifindex of source network interface */
+	CGW_DST_IF,	/* ifindex of destination network interface */
+	CGW_FILTER,	/* specify struct can_filter on source CAN device */
+	__CGW_MAX
+};
+
+#define CGW_MAX (__CGW_MAX - 1)
+
+#define CGW_FLAGS_CAN_ECHO 0x01
+#define CGW_FLAGS_CAN_SRC_TSTAMP 0x02
+
+#define CGW_MOD_FUNCS 4 /* AND OR XOR SET */
+
+/* CAN frame elements that are affected by curr. 3 CAN frame modifications */
+#define CGW_MOD_ID	0x01
+#define CGW_MOD_DLC	0x02
+#define CGW_MOD_DATA	0x04
+
+#define CGW_FRAME_MODS 3 /* ID DLC DATA */
+
+#define MAX_MODFUNCTIONS (CGW_MOD_FUNCS * CGW_FRAME_MODS)
+
+struct cgw_frame_mod {
+	struct can_frame cf;
+	__u8 modtype;
+} __attribute__((packed));
+
+#define CGW_MODATTR_LEN sizeof(struct cgw_frame_mod)
+
+struct cgw_csum_xor {
+	__s8 from_idx;
+	__s8 to_idx;
+	__s8 result_idx;
+	__u8 init_xor_val;
+} __attribute__((packed));
+
+struct cgw_csum_crc8 {
+	__s8 from_idx;
+	__s8 to_idx;
+	__s8 result_idx;
+	__u8 init_crc_val;
+	__u8 final_xor_val;
+	__u8 crctab[256];
+	__u8 profile;
+	__u8 profile_data[20];
+} __attribute__((packed));
+
+/* length of checksum operation parameters. idx = index in CAN frame data[] */
+#define CGW_CS_XOR_LEN  sizeof(struct cgw_csum_xor)
+#define CGW_CS_CRC8_LEN  sizeof(struct cgw_csum_crc8)
+
+/* CRC8 profiles (compute CRC for additional data elements - see below) */
+enum {
+	CGW_CRC8PRF_UNSPEC,
+	CGW_CRC8PRF_1U8,	/* compute one additional u8 value */
+	CGW_CRC8PRF_16U8,	/* u8 value table indexed by data[1] & 0xF */
+	CGW_CRC8PRF_SFFID_XOR,	/* (can_id & 0xFF) ^ (can_id >> 8 & 0xFF) */
+	__CGW_CRC8PRF_MAX
+};
+
+#define CGW_CRC8PRF_MAX (__CGW_CRC8PRF_MAX - 1)
+
+/*
+ * CAN rtnetlink attribute contents in detail
+ *
+ * CGW_XXX_IF (length 4 bytes):
+ * Sets an interface index for source/destination network interfaces.
+ * For the CAN->CAN gwtype the indices of _two_ CAN interfaces are mandatory.
+ *
+ * CGW_FILTER (length 8 bytes):
+ * Sets a CAN receive filter for the gateway job specified by the
+ * struct can_filter described in include/linux/can.h
+ *
+ * CGW_MOD_XXX (length 17 bytes):
+ * Specifies a modification that's done to a received CAN frame before it is
+ * send out to the destination interface.
+ *
+ * <struct can_frame> data used as operator
+ * <u8> affected CAN frame elements
+ *
+ * CGW_CS_XOR (length 4 bytes):
+ * Set a simple XOR checksum starting with an initial value into
+ * data[result-idx] using data[start-idx] .. data[end-idx]
+ *
+ * The XOR checksum is calculated like this:
+ *
+ * xor = init_xor_val
+ *
+ * for (i = from_idx .. to_idx)
+ *      xor ^= can_frame.data[i]
+ *
+ * can_frame.data[ result_idx ] = xor
+ *
+ * CGW_CS_CRC8 (length 282 bytes):
+ * Set a CRC8 value into data[result-idx] using a given 256 byte CRC8 table,
+ * a given initial value and a defined input data[start-idx] .. data[end-idx].
+ * Finally the result value is XOR'ed with the final_xor_val.
+ *
+ * The CRC8 checksum is calculated like this:
+ *
+ * crc = init_crc_val
+ *
+ * for (i = from_idx .. to_idx)
+ *      crc = crctab[ crc ^ can_frame.data[i] ]
+ *
+ * can_frame.data[ result_idx ] = crc ^ final_xor_val
+ *
+ * The calculated CRC may contain additional source data elements that can be
+ * defined in the handling of 'checksum profiles' e.g. shown in AUTOSAR specs
+ * like http://www.autosar.org/download/R4.0/AUTOSAR_SWS_E2ELibrary.pdf
+ * E.g. the profile_data[] may contain additional u8 values (called DATA_IDs)
+ * that are used depending on counter values inside the CAN frame data[].
+ * So far only three profiles have been implemented for illustration.
+ *
+ * Remark: In general the attribute data is a linear buffer.
+ *         Beware of sending unpacked or aligned structs!
+ */
+
+#endif
diff --git a/include/linux/can/netlink.h b/include/linux/can/netlink.h
new file mode 100644
index 00000000..14966ddb
--- /dev/null
+++ b/include/linux/can/netlink.h
@@ -0,0 +1,122 @@
+/*
+ * linux/can/netlink.h
+ *
+ * Definitions for the CAN netlink interface
+ *
+ * Copyright (c) 2009 Wolfgang Grandegger <wg@grandegger.com>
+ *
+ */
+
+#ifndef CAN_NETLINK_H
+#define CAN_NETLINK_H
+
+#include <linux/types.h>
+
+/*
+ * CAN bit-timing parameters
+ *
+ * For further information, please read chapter "8 BIT TIMING
+ * REQUIREMENTS" of the "Bosch CAN Specification version 2.0"
+ * at http://www.semiconductors.bosch.de/pdf/can2spec.pdf.
+ */
+struct can_bittiming {
+	__u32 bitrate;		/* Bit-rate in bits/second */
+	__u32 sample_point;	/* Sample point in one-tenth of a percent */
+	__u32 tq;		/* Time quanta (TQ) in nanoseconds */
+	__u32 prop_seg;		/* Propagation segment in TQs */
+	__u32 phase_seg1;	/* Phase buffer segment 1 in TQs */
+	__u32 phase_seg2;	/* Phase buffer segment 2 in TQs */
+	__u32 sjw;		/* Synchronisation jump width in TQs */
+	__u32 brp;		/* Bit-rate prescaler */
+};
+
+/*
+ * CAN harware-dependent bit-timing constant
+ *
+ * Used for calculating and checking bit-timing parameters
+ */
+struct can_bittiming_const {
+	char name[16];		/* Name of the CAN controller hardware */
+	__u32 tseg1_min;	/* Time segement 1 = prop_seg + phase_seg1 */
+	__u32 tseg1_max;
+	__u32 tseg2_min;	/* Time segement 2 = phase_seg2 */
+	__u32 tseg2_max;
+	__u32 sjw_max;		/* Synchronisation jump width */
+	__u32 brp_min;		/* Bit-rate prescaler */
+	__u32 brp_max;
+	__u32 brp_inc;
+};
+
+/*
+ * CAN clock parameters
+ */
+struct can_clock {
+	__u32 freq;		/* CAN system clock frequency in Hz */
+};
+
+/*
+ * CAN operational and error states
+ */
+enum can_state {
+	CAN_STATE_ERROR_ACTIVE = 0,	/* RX/TX error count < 96 */
+	CAN_STATE_ERROR_WARNING,	/* RX/TX error count < 128 */
+	CAN_STATE_ERROR_PASSIVE,	/* RX/TX error count < 256 */
+	CAN_STATE_BUS_OFF,		/* RX/TX error count >= 256 */
+	CAN_STATE_STOPPED,		/* Device is stopped */
+	CAN_STATE_SLEEPING,		/* Device is sleeping */
+	CAN_STATE_MAX
+};
+
+/*
+ * CAN bus error counters
+ */
+struct can_berr_counter {
+	__u16 txerr;
+	__u16 rxerr;
+};
+
+/*
+ * CAN controller mode
+ */
+struct can_ctrlmode {
+	__u32 mask;
+	__u32 flags;
+};
+
+#define CAN_CTRLMODE_LOOPBACK		0x01	/* Loopback mode */
+#define CAN_CTRLMODE_LISTENONLY		0x02 	/* Listen-only mode */
+#define CAN_CTRLMODE_3_SAMPLES		0x04	/* Triple sampling mode */
+#define CAN_CTRLMODE_ONE_SHOT		0x08	/* One-Shot mode */
+#define CAN_CTRLMODE_BERR_REPORTING	0x10	/* Bus-error reporting */
+
+/*
+ * CAN device statistics
+ */
+struct can_device_stats {
+	__u32 bus_error;	/* Bus errors */
+	__u32 error_warning;	/* Changes to error warning state */
+	__u32 error_passive;	/* Changes to error passive state */
+	__u32 bus_off;		/* Changes to bus off state */
+	__u32 arbitration_lost; /* Arbitration lost errors */
+	__u32 restarts;		/* CAN controller re-starts */
+};
+
+/*
+ * CAN netlink interface
+ */
+enum {
+	IFLA_CAN_UNSPEC,
+	IFLA_CAN_BITTIMING,
+	IFLA_CAN_BITTIMING_CONST,
+	IFLA_CAN_CLOCK,
+	IFLA_CAN_STATE,
+	IFLA_CAN_CTRLMODE,
+	IFLA_CAN_RESTART_MS,
+	IFLA_CAN_RESTART,
+	IFLA_CAN_BERR_COUNTER,
+	__IFLA_CAN_MAX
+};
+
+#define IFLA_CAN_MAX	(__IFLA_CAN_MAX - 1)
+
+#endif /* CAN_NETLINK_H */
diff --git a/include/linux/can/platform/cc770.h b/include/linux/can/platform/cc770.h
new file mode 100644
index 00000000..7702641f
--- /dev/null
+++ b/include/linux/can/platform/cc770.h
@@ -0,0 +1,33 @@
+#ifndef _CAN_PLATFORM_CC770_H_
+#define _CAN_PLATFORM_CC770_H_
+
+/* CPU Interface Register (0x02) */
+#define CPUIF_CEN	0x01	/* Clock Out Enable */
+#define CPUIF_MUX	0x04	/* Multiplex */
+#define CPUIF_SLP	0x08	/* Sleep */
+#define CPUIF_PWD	0x10	/* Power Down Mode */
+#define CPUIF_DMC	0x20	/* Divide Memory Clock */
+#define CPUIF_DSC	0x40	/* Divide System Clock */
+#define CPUIF_RST	0x80	/* Hardware Reset Status */
+
+/* Clock Out Register (0x1f) */
+#define CLKOUT_CD_MASK  0x0f	/* Clock Divider mask */
+#define CLKOUT_SL_MASK	0x30	/* Slew Rate mask */
+#define CLKOUT_SL_SHIFT	4
+
+/* Bus Configuration Register (0x2f) */
+#define BUSCFG_DR0	0x01	/* Disconnect RX0 Input / Select RX input */
+#define BUSCFG_DR1	0x02	/* Disconnect RX1 Input / Silent mode */
+#define BUSCFG_DT1	0x08	/* Disconnect TX1 Output */
+#define BUSCFG_POL	0x20	/* Polarity dominant or recessive */
+#define BUSCFG_CBY	0x40	/* Input Comparator Bypass */
+
+struct cc770_platform_data {
+	u32 osc_freq;	/* CAN bus oscillator frequency in Hz */
+
+	u8 cir;		/* CPU Interface Register */
+	u8 cor;		/* Clock Out Register */
+	u8 bcr;		/* Bus Configuration Register */
+};
+
+#endif	/* !_CAN_PLATFORM_CC770_H_ */
diff --git a/include/linux/can/platform/flexcan.h b/include/linux/can/platform/flexcan.h
new file mode 100644
index 00000000..72b713ab
--- /dev/null
+++ b/include/linux/can/platform/flexcan.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2010 Marc Kleine-Budde <kernel@pengutronix.de>
+ *
+ * This file is released under the GPLv2
+ *
+ */
+
+#ifndef __CAN_PLATFORM_FLEXCAN_H
+#define __CAN_PLATFORM_FLEXCAN_H
+
+/**
+ * struct flexcan_platform_data - flex CAN controller platform data
+ * @transceiver_enable:         - called to power on/off the transceiver
+ *
+ */
+struct flexcan_platform_data {
+	void (*transceiver_switch)(int enable);
+};
+
+#endif /* __CAN_PLATFORM_FLEXCAN_H */
diff --git a/include/linux/can/platform/mcp251x.h b/include/linux/can/platform/mcp251x.h
new file mode 100644
index 00000000..089fe432
--- /dev/null
+++ b/include/linux/can/platform/mcp251x.h
@@ -0,0 +1,34 @@
+#ifndef __CAN_PLATFORM_MCP251X_H__
+#define __CAN_PLATFORM_MCP251X_H__
+
+/*
+ *
+ * CAN bus driver for Microchip 251x CAN Controller with SPI Interface
+ *
+ */
+
+#include <linux/spi/spi.h>
+
+/**
+ * struct mcp251x_platform_data - MCP251X SPI CAN controller platform data
+ * @oscillator_frequency:       - oscillator frequency in Hz
+ * @irq_flags:                  - IRQF configuration flags
+ * @board_specific_setup:       - called before probing the chip (power,reset)
+ * @transceiver_enable:         - called to power on/off the transceiver
+ * @power_enable:               - called to power on/off the mcp *and* the
+ *                                transceiver
+ *
+ * Please note that you should define power_enable or transceiver_enable or
+ * none of them. Defining both of them is no use.
+ *
+ */
+
+struct mcp251x_platform_data {
+	unsigned long oscillator_frequency;
+	unsigned long irq_flags;
+	int (*board_specific_setup)(struct spi_device *spi);
+	int (*transceiver_enable)(int enable);
+	int (*power_enable) (int enable);
+};
+
+#endif /* __CAN_PLATFORM_MCP251X_H__ */
diff --git a/include/linux/can/platform/sja1000.h b/include/linux/can/platform/sja1000.h
new file mode 100644
index 00000000..96f8fcc7
--- /dev/null
+++ b/include/linux/can/platform/sja1000.h
@@ -0,0 +1,35 @@
+#ifndef _CAN_PLATFORM_SJA1000_H_
+#define _CAN_PLATFORM_SJA1000_H_
+
+/* clock divider register */
+#define CDR_CLKOUT_MASK 0x07
+#define CDR_CLK_OFF	0x08 /* Clock off (CLKOUT pin) */
+#define CDR_RXINPEN	0x20 /* TX1 output is RX irq output */
+#define CDR_CBP		0x40 /* CAN input comparator bypass */
+#define CDR_PELICAN	0x80 /* PeliCAN mode */
+
+/* output control register */
+#define OCR_MODE_BIPHASE  0x00
+#define OCR_MODE_TEST     0x01
+#define OCR_MODE_NORMAL   0x02
+#define OCR_MODE_CLOCK    0x03
+#define OCR_MODE_MASK     0x07
+#define OCR_TX0_INVERT    0x04
+#define OCR_TX0_PULLDOWN  0x08
+#define OCR_TX0_PULLUP    0x10
+#define OCR_TX0_PUSHPULL  0x18
+#define OCR_TX1_INVERT    0x20
+#define OCR_TX1_PULLDOWN  0x40
+#define OCR_TX1_PULLUP    0x80
+#define OCR_TX1_PUSHPULL  0xc0
+#define OCR_TX_MASK       0xfc
+#define OCR_TX_SHIFT      2
+
+struct sja1000_platform_data {
+	u32 osc_freq;	/* CAN bus oscillator frequency in Hz */
+
+	u8 ocr;		/* output control register */
+	u8 cdr;		/* clock divider register */
+};
+
+#endif	/* !_CAN_PLATFORM_SJA1000_H_ */
diff --git a/include/linux/can/platform/ti_hecc.h b/include/linux/can/platform/ti_hecc.h
new file mode 100644
index 00000000..af17cb3f
--- /dev/null
+++ b/include/linux/can/platform/ti_hecc.h
@@ -0,0 +1,44 @@
+#ifndef __CAN_PLATFORM_TI_HECC_H__
+#define __CAN_PLATFORM_TI_HECC_H__
+
+/*
+ * TI HECC (High End CAN Controller) driver platform header
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed as is WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+/**
+ * struct hecc_platform_data - HECC Platform Data
+ *
+ * @scc_hecc_offset:	mostly 0 - should really never change
+ * @scc_ram_offset:	SCC RAM offset
+ * @hecc_ram_offset:	HECC RAM offset
+ * @mbx_offset:		Mailbox RAM offset
+ * @int_line:		Interrupt line to use - 0 or 1
+ * @version:		version for future use
+ * @transceiver_switch:	platform specific callback fn for transceiver control
+ *
+ * Platform data structure to get all platform specific settings.
+ * this structure also accounts the fact that the IP may have different
+ * RAM and mailbox offsets for different SOC's
+ */
+struct ti_hecc_platform_data {
+	u32 scc_hecc_offset;
+	u32 scc_ram_offset;
+	u32 hecc_ram_offset;
+	u32 mbx_offset;
+	u32 int_line;
+	u32 version;
+	void (*transceiver_switch) (int);
+};
+#endif
diff --git a/include/linux/can/raw.h b/include/linux/can/raw.h
new file mode 100644
index 00000000..781f3a37
--- /dev/null
+++ b/include/linux/can/raw.h
@@ -0,0 +1,29 @@
+/*
+ * linux/can/raw.h
+ *
+ * Definitions for raw CAN sockets
+ *
+ * Authors: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
+ *          Urs Thuermann   <urs.thuermann@volkswagen.de>
+ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
+ * All rights reserved.
+ *
+ */
+
+#ifndef CAN_RAW_H
+#define CAN_RAW_H
+
+#include <linux/can.h>
+
+#define SOL_CAN_RAW (SOL_CAN_BASE + CAN_RAW)
+
+/* for socket options affecting the socket (not the global system) */
+
+enum {
+	CAN_RAW_FILTER = 1,	/* set 0 .. n can_filter(s)          */
+	CAN_RAW_ERR_FILTER,	/* set filter for error frames       */
+	CAN_RAW_LOOPBACK,	/* local loopback (default:on)       */
+	CAN_RAW_RECV_OWN_MSGS	/* receive my own msgs (default:off) */
+};
+
+#endif
diff --git a/include/linux/capability.h b/include/linux/capability.h
new file mode 100644
index 00000000..c398cff3
--- /dev/null
+++ b/include/linux/capability.h
@@ -0,0 +1,560 @@
+/*
+ * This is <linux/capability.h>
+ *
+ * Andrew G. Morgan <morgan@kernel.org>
+ * Alexander Kjeldaas <astor@guardian.no>
+ * with help from Aleph1, Roland Buresund and Andrew Main.
+ *
+ * See here for the libcap library ("POSIX draft" compliance):
+ *
+ * ftp://www.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/
+ */
+
+#ifndef _LINUX_CAPABILITY_H
+#define _LINUX_CAPABILITY_H
+
+#include <linux/types.h>
+
+struct task_struct;
+
+/* User-level do most of the mapping between kernel and user
+   capabilities based on the version tag given by the kernel. The
+   kernel might be somewhat backwards compatible, but don't bet on
+   it. */
+
+/* Note, cap_t, is defined by POSIX (draft) to be an "opaque" pointer to
+   a set of three capability sets.  The transposition of 3*the
+   following structure to such a composite is better handled in a user
+   library since the draft standard requires the use of malloc/free
+   etc.. */
+
+#define _LINUX_CAPABILITY_VERSION_1  0x19980330
+#define _LINUX_CAPABILITY_U32S_1     1
+
+#define _LINUX_CAPABILITY_VERSION_2  0x20071026  /* deprecated - use v3 */
+#define _LINUX_CAPABILITY_U32S_2     2
+
+#define _LINUX_CAPABILITY_VERSION_3  0x20080522
+#define _LINUX_CAPABILITY_U32S_3     2
+
+typedef struct __user_cap_header_struct {
+	__u32 version;
+	int pid;
+} __user *cap_user_header_t;
+
+typedef struct __user_cap_data_struct {
+        __u32 effective;
+        __u32 permitted;
+        __u32 inheritable;
+} __user *cap_user_data_t;
+
+
+#define VFS_CAP_REVISION_MASK	0xFF000000
+#define VFS_CAP_REVISION_SHIFT	24
+#define VFS_CAP_FLAGS_MASK	~VFS_CAP_REVISION_MASK
+#define VFS_CAP_FLAGS_EFFECTIVE	0x000001
+
+#define VFS_CAP_REVISION_1	0x01000000
+#define VFS_CAP_U32_1           1
+#define XATTR_CAPS_SZ_1         (sizeof(__le32)*(1 + 2*VFS_CAP_U32_1))
+
+#define VFS_CAP_REVISION_2	0x02000000
+#define VFS_CAP_U32_2           2
+#define XATTR_CAPS_SZ_2         (sizeof(__le32)*(1 + 2*VFS_CAP_U32_2))
+
+#define XATTR_CAPS_SZ           XATTR_CAPS_SZ_2
+#define VFS_CAP_U32             VFS_CAP_U32_2
+#define VFS_CAP_REVISION	VFS_CAP_REVISION_2
+
+struct vfs_cap_data {
+	__le32 magic_etc;            /* Little endian */
+	struct {
+		__le32 permitted;    /* Little endian */
+		__le32 inheritable;  /* Little endian */
+	} data[VFS_CAP_U32];
+};
+
+#ifndef __KERNEL__
+
+/*
+ * Backwardly compatible definition for source code - trapped in a
+ * 32-bit world. If you find you need this, please consider using
+ * libcap to untrap yourself...
+ */
+#define _LINUX_CAPABILITY_VERSION  _LINUX_CAPABILITY_VERSION_1
+#define _LINUX_CAPABILITY_U32S     _LINUX_CAPABILITY_U32S_1
+
+#else
+
+#define _KERNEL_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_3
+#define _KERNEL_CAPABILITY_U32S    _LINUX_CAPABILITY_U32S_3
+
+extern int file_caps_enabled;
+
+typedef struct kernel_cap_struct {
+	__u32 cap[_KERNEL_CAPABILITY_U32S];
+} kernel_cap_t;
+
+/* exact same as vfs_cap_data but in cpu endian and always filled completely */
+struct cpu_vfs_cap_data {
+	__u32 magic_etc;
+	kernel_cap_t permitted;
+	kernel_cap_t inheritable;
+};
+
+#define _USER_CAP_HEADER_SIZE  (sizeof(struct __user_cap_header_struct))
+#define _KERNEL_CAP_T_SIZE     (sizeof(kernel_cap_t))
+
+#endif
+
+
+/**
+ ** POSIX-draft defined capabilities.
+ **/
+
+/* In a system with the [_POSIX_CHOWN_RESTRICTED] option defined, this
+   overrides the restriction of changing file ownership and group
+   ownership. */
+
+#define CAP_CHOWN            0
+
+/* Override all DAC access, including ACL execute access if
+   [_POSIX_ACL] is defined. Excluding DAC access covered by
+   CAP_LINUX_IMMUTABLE. */
+
+#define CAP_DAC_OVERRIDE     1
+
+/* Overrides all DAC restrictions regarding read and search on files
+   and directories, including ACL restrictions if [_POSIX_ACL] is
+   defined. Excluding DAC access covered by CAP_LINUX_IMMUTABLE. */
+
+#define CAP_DAC_READ_SEARCH  2
+
+/* Overrides all restrictions about allowed operations on files, where
+   file owner ID must be equal to the user ID, except where CAP_FSETID
+   is applicable. It doesn't override MAC and DAC restrictions. */
+
+#define CAP_FOWNER           3
+
+/* Overrides the following restrictions that the effective user ID
+   shall match the file owner ID when setting the S_ISUID and S_ISGID
+   bits on that file; that the effective group ID (or one of the
+   supplementary group IDs) shall match the file owner ID when setting
+   the S_ISGID bit on that file; that the S_ISUID and S_ISGID bits are
+   cleared on successful return from chown(2) (not implemented). */
+
+#define CAP_FSETID           4
+
+/* Overrides the restriction that the real or effective user ID of a
+   process sending a signal must match the real or effective user ID
+   of the process receiving the signal. */
+
+#define CAP_KILL             5
+
+/* Allows setgid(2) manipulation */
+/* Allows setgroups(2) */
+/* Allows forged gids on socket credentials passing. */
+
+#define CAP_SETGID           6
+
+/* Allows set*uid(2) manipulation (including fsuid). */
+/* Allows forged pids on socket credentials passing. */
+
+#define CAP_SETUID           7
+
+
+/**
+ ** Linux-specific capabilities
+ **/
+
+/* Without VFS support for capabilities:
+ *   Transfer any capability in your permitted set to any pid,
+ *   remove any capability in your permitted set from any pid
+ * With VFS support for capabilities (neither of above, but)
+ *   Add any capability from current's capability bounding set
+ *       to the current process' inheritable set
+ *   Allow taking bits out of capability bounding set
+ *   Allow modification of the securebits for a process
+ */
+
+#define CAP_SETPCAP          8
+
+/* Allow modification of S_IMMUTABLE and S_APPEND file attributes */
+
+#define CAP_LINUX_IMMUTABLE  9
+
+/* Allows binding to TCP/UDP sockets below 1024 */
+/* Allows binding to ATM VCIs below 32 */
+
+#define CAP_NET_BIND_SERVICE 10
+
+/* Allow broadcasting, listen to multicast */
+
+#define CAP_NET_BROADCAST    11
+
+/* Allow interface configuration */
+/* Allow administration of IP firewall, masquerading and accounting */
+/* Allow setting debug option on sockets */
+/* Allow modification of routing tables */
+/* Allow setting arbitrary process / process group ownership on
+   sockets */
+/* Allow binding to any address for transparent proxying (also via NET_RAW) */
+/* Allow setting TOS (type of service) */
+/* Allow setting promiscuous mode */
+/* Allow clearing driver statistics */
+/* Allow multicasting */
+/* Allow read/write of device-specific registers */
+/* Allow activation of ATM control sockets */
+
+#define CAP_NET_ADMIN        12
+
+/* Allow use of RAW sockets */
+/* Allow use of PACKET sockets */
+/* Allow binding to any address for transparent proxying (also via NET_ADMIN) */
+
+#define CAP_NET_RAW          13
+
+/* Allow locking of shared memory segments */
+/* Allow mlock and mlockall (which doesn't really have anything to do
+   with IPC) */
+
+#define CAP_IPC_LOCK         14
+
+/* Override IPC ownership checks */
+
+#define CAP_IPC_OWNER        15
+
+/* Insert and remove kernel modules - modify kernel without limit */
+#define CAP_SYS_MODULE       16
+
+/* Allow ioperm/iopl access */
+/* Allow sending USB messages to any device via /proc/bus/usb */
+
+#define CAP_SYS_RAWIO        17
+
+/* Allow use of chroot() */
+
+#define CAP_SYS_CHROOT       18
+
+/* Allow ptrace() of any process */
+
+#define CAP_SYS_PTRACE       19
+
+/* Allow configuration of process accounting */
+
+#define CAP_SYS_PACCT        20
+
+/* Allow configuration of the secure attention key */
+/* Allow administration of the random device */
+/* Allow examination and configuration of disk quotas */
+/* Allow setting the domainname */
+/* Allow setting the hostname */
+/* Allow calling bdflush() */
+/* Allow mount() and umount(), setting up new smb connection */
+/* Allow some autofs root ioctls */
+/* Allow nfsservctl */
+/* Allow VM86_REQUEST_IRQ */
+/* Allow to read/write pci config on alpha */
+/* Allow irix_prctl on mips (setstacksize) */
+/* Allow flushing all cache on m68k (sys_cacheflush) */
+/* Allow removing semaphores */
+/* Used instead of CAP_CHOWN to "chown" IPC message queues, semaphores
+   and shared memory */
+/* Allow locking/unlocking of shared memory segment */
+/* Allow turning swap on/off */
+/* Allow forged pids on socket credentials passing */
+/* Allow setting readahead and flushing buffers on block devices */
+/* Allow setting geometry in floppy driver */
+/* Allow turning DMA on/off in xd driver */
+/* Allow administration of md devices (mostly the above, but some
+   extra ioctls) */
+/* Allow tuning the ide driver */
+/* Allow access to the nvram device */
+/* Allow administration of apm_bios, serial and bttv (TV) device */
+/* Allow manufacturer commands in isdn CAPI support driver */
+/* Allow reading non-standardized portions of pci configuration space */
+/* Allow DDI debug ioctl on sbpcd driver */
+/* Allow setting up serial ports */
+/* Allow sending raw qic-117 commands */
+/* Allow enabling/disabling tagged queuing on SCSI controllers and sending
+   arbitrary SCSI commands */
+/* Allow setting encryption key on loopback filesystem */
+/* Allow setting zone reclaim policy */
+
+#define CAP_SYS_ADMIN        21
+
+/* Allow use of reboot() */
+
+#define CAP_SYS_BOOT         22
+
+/* Allow raising priority and setting priority on other (different
+   UID) processes */
+/* Allow use of FIFO and round-robin (realtime) scheduling on own
+   processes and setting the scheduling algorithm used by another
+   process. */
+/* Allow setting cpu affinity on other processes */
+
+#define CAP_SYS_NICE         23
+
+/* Override resource limits. Set resource limits. */
+/* Override quota limits. */
+/* Override reserved space on ext2 filesystem */
+/* Modify data journaling mode on ext3 filesystem (uses journaling
+   resources) */
+/* NOTE: ext2 honors fsuid when checking for resource overrides, so
+   you can override using fsuid too */
+/* Override size restrictions on IPC message queues */
+/* Allow more than 64hz interrupts from the real-time clock */
+/* Override max number of consoles on console allocation */
+/* Override max number of keymaps */
+
+#define CAP_SYS_RESOURCE     24
+
+/* Allow manipulation of system clock */
+/* Allow irix_stime on mips */
+/* Allow setting the real-time clock */
+
+#define CAP_SYS_TIME         25
+
+/* Allow configuration of tty devices */
+/* Allow vhangup() of tty */
+
+#define CAP_SYS_TTY_CONFIG   26
+
+/* Allow the privileged aspects of mknod() */
+
+#define CAP_MKNOD            27
+
+/* Allow taking of leases on files */
+
+#define CAP_LEASE            28
+
+#define CAP_AUDIT_WRITE      29
+
+#define CAP_AUDIT_CONTROL    30
+
+#define CAP_SETFCAP	     31
+
+/* Override MAC access.
+   The base kernel enforces no MAC policy.
+   An LSM may enforce a MAC policy, and if it does and it chooses
+   to implement capability based overrides of that policy, this is
+   the capability it should use to do so. */
+
+#define CAP_MAC_OVERRIDE     32
+
+/* Allow MAC configuration or state changes.
+   The base kernel requires no MAC configuration.
+   An LSM may enforce a MAC policy, and if it does and it chooses
+   to implement capability based checks on modifications to that
+   policy or the data required to maintain it, this is the
+   capability it should use to do so. */
+
+#define CAP_MAC_ADMIN        33
+
+/* Allow configuring the kernel's syslog (printk behaviour) */
+
+#define CAP_SYSLOG           34
+
+/* Allow triggering something that will wake the system */
+
+#define CAP_WAKE_ALARM            35
+
+/* Allow preventing system suspends while epoll events are pending */
+
+#define CAP_EPOLLWAKEUP      36
+
+#define CAP_LAST_CAP         CAP_EPOLLWAKEUP
+
+#define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP)
+
+/*
+ * Bit location of each capability (used by user-space library and kernel)
+ */
+
+#define CAP_TO_INDEX(x)     ((x) >> 5)        /* 1 << 5 == bits in __u32 */
+#define CAP_TO_MASK(x)      (1 << ((x) & 31)) /* mask for indexed __u32 */
+
+#ifdef __KERNEL__
+
+struct dentry;
+struct user_namespace;
+
+struct user_namespace *current_user_ns(void);
+
+extern const kernel_cap_t __cap_empty_set;
+extern const kernel_cap_t __cap_init_eff_set;
+
+/*
+ * Internal kernel functions only
+ */
+
+#define CAP_FOR_EACH_U32(__capi)  \
+	for (__capi = 0; __capi < _KERNEL_CAPABILITY_U32S; ++__capi)
+
+/*
+ * CAP_FS_MASK and CAP_NFSD_MASKS:
+ *
+ * The fs mask is all the privileges that fsuid==0 historically meant.
+ * At one time in the past, that included CAP_MKNOD and CAP_LINUX_IMMUTABLE.
+ *
+ * It has never meant setting security.* and trusted.* xattrs.
+ *
+ * We could also define fsmask as follows:
+ *   1. CAP_FS_MASK is the privilege to bypass all fs-related DAC permissions
+ *   2. The security.* and trusted.* xattrs are fs-related MAC permissions
+ */
+
+# define CAP_FS_MASK_B0     (CAP_TO_MASK(CAP_CHOWN)		\
+			    | CAP_TO_MASK(CAP_MKNOD)		\
+			    | CAP_TO_MASK(CAP_DAC_OVERRIDE)	\
+			    | CAP_TO_MASK(CAP_DAC_READ_SEARCH)	\
+			    | CAP_TO_MASK(CAP_FOWNER)		\
+			    | CAP_TO_MASK(CAP_FSETID))
+
+# define CAP_FS_MASK_B1     (CAP_TO_MASK(CAP_MAC_OVERRIDE))
+
+#if _KERNEL_CAPABILITY_U32S != 2
+# error Fix up hand-coded capability macro initializers
+#else /* HAND-CODED capability initializers */
+
+# define CAP_EMPTY_SET    ((kernel_cap_t){{ 0, 0 }})
+# define CAP_FULL_SET     ((kernel_cap_t){{ ~0, ~0 }})
+# define CAP_FS_SET       ((kernel_cap_t){{ CAP_FS_MASK_B0 \
+				    | CAP_TO_MASK(CAP_LINUX_IMMUTABLE), \
+				    CAP_FS_MASK_B1 } })
+# define CAP_NFSD_SET     ((kernel_cap_t){{ CAP_FS_MASK_B0 \
+				    | CAP_TO_MASK(CAP_SYS_RESOURCE), \
+				    CAP_FS_MASK_B1 } })
+
+#endif /* _KERNEL_CAPABILITY_U32S != 2 */
+
+# define cap_clear(c)         do { (c) = __cap_empty_set; } while (0)
+
+#define cap_raise(c, flag)  ((c).cap[CAP_TO_INDEX(flag)] |= CAP_TO_MASK(flag))
+#define cap_lower(c, flag)  ((c).cap[CAP_TO_INDEX(flag)] &= ~CAP_TO_MASK(flag))
+#define cap_raised(c, flag) ((c).cap[CAP_TO_INDEX(flag)] & CAP_TO_MASK(flag))
+
+#define CAP_BOP_ALL(c, a, b, OP)                                    \
+do {                                                                \
+	unsigned __capi;                                            \
+	CAP_FOR_EACH_U32(__capi) {                                  \
+		c.cap[__capi] = a.cap[__capi] OP b.cap[__capi];     \
+	}                                                           \
+} while (0)
+
+#define CAP_UOP_ALL(c, a, OP)                                       \
+do {                                                                \
+	unsigned __capi;                                            \
+	CAP_FOR_EACH_U32(__capi) {                                  \
+		c.cap[__capi] = OP a.cap[__capi];                   \
+	}                                                           \
+} while (0)
+
+static inline kernel_cap_t cap_combine(const kernel_cap_t a,
+				       const kernel_cap_t b)
+{
+	kernel_cap_t dest;
+	CAP_BOP_ALL(dest, a, b, |);
+	return dest;
+}
+
+static inline kernel_cap_t cap_intersect(const kernel_cap_t a,
+					 const kernel_cap_t b)
+{
+	kernel_cap_t dest;
+	CAP_BOP_ALL(dest, a, b, &);
+	return dest;
+}
+
+static inline kernel_cap_t cap_drop(const kernel_cap_t a,
+				    const kernel_cap_t drop)
+{
+	kernel_cap_t dest;
+	CAP_BOP_ALL(dest, a, drop, &~);
+	return dest;
+}
+
+static inline kernel_cap_t cap_invert(const kernel_cap_t c)
+{
+	kernel_cap_t dest;
+	CAP_UOP_ALL(dest, c, ~);
+	return dest;
+}
+
+static inline int cap_isclear(const kernel_cap_t a)
+{
+	unsigned __capi;
+	CAP_FOR_EACH_U32(__capi) {
+		if (a.cap[__capi] != 0)
+			return 0;
+	}
+	return 1;
+}
+
+/*
+ * Check if "a" is a subset of "set".
+ * return 1 if ALL of the capabilities in "a" are also in "set"
+ *	cap_issubset(0101, 1111) will return 1
+ * return 0 if ANY of the capabilities in "a" are not in "set"
+ *	cap_issubset(1111, 0101) will return 0
+ */
+static inline int cap_issubset(const kernel_cap_t a, const kernel_cap_t set)
+{
+	kernel_cap_t dest;
+	dest = cap_drop(a, set);
+	return cap_isclear(dest);
+}
+
+/* Used to decide between falling back on the old suser() or fsuser(). */
+
+static inline int cap_is_fs_cap(int cap)
+{
+	const kernel_cap_t __cap_fs_set = CAP_FS_SET;
+	return !!(CAP_TO_MASK(cap) & __cap_fs_set.cap[CAP_TO_INDEX(cap)]);
+}
+
+static inline kernel_cap_t cap_drop_fs_set(const kernel_cap_t a)
+{
+	const kernel_cap_t __cap_fs_set = CAP_FS_SET;
+	return cap_drop(a, __cap_fs_set);
+}
+
+static inline kernel_cap_t cap_raise_fs_set(const kernel_cap_t a,
+					    const kernel_cap_t permitted)
+{
+	const kernel_cap_t __cap_fs_set = CAP_FS_SET;
+	return cap_combine(a,
+			   cap_intersect(permitted, __cap_fs_set));
+}
+
+static inline kernel_cap_t cap_drop_nfsd_set(const kernel_cap_t a)
+{
+	const kernel_cap_t __cap_fs_set = CAP_NFSD_SET;
+	return cap_drop(a, __cap_fs_set);
+}
+
+static inline kernel_cap_t cap_raise_nfsd_set(const kernel_cap_t a,
+					      const kernel_cap_t permitted)
+{
+	const kernel_cap_t __cap_nfsd_set = CAP_NFSD_SET;
+	return cap_combine(a,
+			   cap_intersect(permitted, __cap_nfsd_set));
+}
+
+extern bool has_capability(struct task_struct *t, int cap);
+extern bool has_ns_capability(struct task_struct *t,
+			      struct user_namespace *ns, int cap);
+extern bool has_capability_noaudit(struct task_struct *t, int cap);
+extern bool has_ns_capability_noaudit(struct task_struct *t,
+				      struct user_namespace *ns, int cap);
+extern bool capable(int cap);
+extern bool ns_capable(struct user_namespace *ns, int cap);
+extern bool nsown_capable(int cap);
+
+/* audit system wants to get cap info from files as well */
+extern int get_vfs_caps_from_disk(const struct dentry *dentry, struct cpu_vfs_cap_data *cpu_caps);
+
+#endif /* __KERNEL__ */
+
+#endif /* !_LINUX_CAPABILITY_H */
diff --git a/include/linux/capi.h b/include/linux/capi.h
new file mode 100644
index 00000000..65100d6c
--- /dev/null
+++ b/include/linux/capi.h
@@ -0,0 +1,133 @@
+/* $Id: capi.h,v 1.4.6.1 2001/09/23 22:25:05 kai Exp $
+ * 
+ * CAPI 2.0 Interface for Linux
+ * 
+ * Copyright 1997 by Carsten Paeth (calle@calle.in-berlin.de)
+ * 
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef __LINUX_CAPI_H__
+#define __LINUX_CAPI_H__
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+#ifndef __KERNEL__
+#include <linux/kernelcapi.h>
+#endif
+
+/*
+ * CAPI_REGISTER
+ */
+
+typedef struct capi_register_params {	/* CAPI_REGISTER */
+	__u32 level3cnt;	/* No. of simulatneous user data connections */
+	__u32 datablkcnt;	/* No. of buffered data messages */
+	__u32 datablklen;	/* Size of buffered data messages */
+} capi_register_params;
+
+#define	CAPI_REGISTER	_IOW('C',0x01,struct capi_register_params)
+
+/*
+ * CAPI_GET_MANUFACTURER
+ */
+
+#define CAPI_MANUFACTURER_LEN		64
+
+#define	CAPI_GET_MANUFACTURER	_IOWR('C',0x06,int)	/* broken: wanted size 64 (CAPI_MANUFACTURER_LEN) */
+
+/*
+ * CAPI_GET_VERSION
+ */
+
+typedef struct capi_version {
+	__u32 majorversion;
+	__u32 minorversion;
+	__u32 majormanuversion;
+	__u32 minormanuversion;
+} capi_version;
+
+#define CAPI_GET_VERSION	_IOWR('C',0x07,struct capi_version)
+
+/*
+ * CAPI_GET_SERIAL
+ */
+
+#define CAPI_SERIAL_LEN		8
+#define CAPI_GET_SERIAL		_IOWR('C',0x08,int)	/* broken: wanted size 8 (CAPI_SERIAL_LEN) */
+
+/*
+ * CAPI_GET_PROFILE
+ */
+
+typedef struct capi_profile {
+	__u16 ncontroller;	/* number of installed controller */
+	__u16 nbchannel;	/* number of B-Channels */
+	__u32 goptions;		/* global options */
+	__u32 support1;		/* B1 protocols support */
+	__u32 support2;		/* B2 protocols support */
+	__u32 support3;		/* B3 protocols support */
+	__u32 reserved[6];	/* reserved */
+	__u32 manu[5];		/* manufacturer specific information */
+} capi_profile;
+
+#define CAPI_GET_PROFILE	_IOWR('C',0x09,struct capi_profile)
+
+typedef struct capi_manufacturer_cmd {
+	unsigned long cmd;
+	void __user *data;
+} capi_manufacturer_cmd;
+
+/*
+ * CAPI_MANUFACTURER_CMD
+ */
+
+#define CAPI_MANUFACTURER_CMD	_IOWR('C',0x20, struct capi_manufacturer_cmd)
+
+/*
+ * CAPI_GET_ERRCODE
+ * capi errcode is set, * if read, write, or ioctl returns EIO,
+ * ioctl returns errcode directly, and in arg, if != 0
+ */
+
+#define CAPI_GET_ERRCODE	_IOR('C',0x21, __u16)
+
+/*
+ * CAPI_INSTALLED
+ */
+#define CAPI_INSTALLED		_IOR('C',0x22, __u16)
+
+
+/*
+ * member contr is input for
+ * CAPI_GET_MANUFACTURER, CAPI_VERSION, CAPI_GET_SERIAL
+ * and CAPI_GET_PROFILE
+ */
+typedef union capi_ioctl_struct {
+	__u32 contr;
+	capi_register_params rparams;
+	__u8 manufacturer[CAPI_MANUFACTURER_LEN];
+	capi_version version;
+	__u8 serial[CAPI_SERIAL_LEN];
+	capi_profile profile;
+	capi_manufacturer_cmd cmd;
+	__u16 errcode;
+} capi_ioctl_struct;
+
+/*
+ * Middleware extension
+ */
+
+#define CAPIFLAG_HIGHJACKING	0x0001
+
+#define CAPI_GET_FLAGS		_IOR('C',0x23, unsigned)
+#define CAPI_SET_FLAGS		_IOR('C',0x24, unsigned)
+#define CAPI_CLR_FLAGS		_IOR('C',0x25, unsigned)
+
+#define CAPI_NCCI_OPENCOUNT	_IOR('C',0x26, unsigned)
+
+#define CAPI_NCCI_GETUNIT	_IOR('C',0x27, unsigned)
+
+#endif				/* __LINUX_CAPI_H__ */
diff --git a/include/linux/cb710.h b/include/linux/cb710.h
new file mode 100644
index 00000000..8cc10411
--- /dev/null
+++ b/include/linux/cb710.h
@@ -0,0 +1,208 @@
+/*
+ *  cb710/cb710.h
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef LINUX_CB710_DRIVER_H
+#define LINUX_CB710_DRIVER_H
+
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+
+struct cb710_slot;
+
+typedef int (*cb710_irq_handler_t)(struct cb710_slot *);
+
+/* per-virtual-slot structure */
+struct cb710_slot {
+	struct platform_device	pdev;
+	void __iomem		*iobase;
+	cb710_irq_handler_t	irq_handler;
+};
+
+/* per-device structure */
+struct cb710_chip {
+	struct pci_dev		*pdev;
+	void __iomem		*iobase;
+	unsigned		platform_id;
+#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
+	atomic_t		slot_refs_count;
+#endif
+	unsigned		slot_mask;
+	unsigned		slots;
+	spinlock_t		irq_lock;
+	struct cb710_slot	slot[0];
+};
+
+/* NOTE: cb710_chip.slots is modified only during device init/exit and
+ * they are all serialized wrt themselves */
+
+/* cb710_chip.slot_mask values */
+#define CB710_SLOT_MMC		1
+#define CB710_SLOT_MS		2
+#define CB710_SLOT_SM		4
+
+/* slot port accessors - so the logic is more clear in the code */
+#define CB710_PORT_ACCESSORS(t) \
+static inline void cb710_write_port_##t(struct cb710_slot *slot,	\
+	unsigned port, u##t value)					\
+{									\
+	iowrite##t(value, slot->iobase + port);				\
+}									\
+									\
+static inline u##t cb710_read_port_##t(struct cb710_slot *slot,		\
+	unsigned port)							\
+{									\
+	return ioread##t(slot->iobase + port);				\
+}									\
+									\
+static inline void cb710_modify_port_##t(struct cb710_slot *slot,	\
+	unsigned port, u##t set, u##t clear)				\
+{									\
+	iowrite##t(							\
+		(ioread##t(slot->iobase + port) & ~clear)|set,		\
+		slot->iobase + port);					\
+}
+
+CB710_PORT_ACCESSORS(8)
+CB710_PORT_ACCESSORS(16)
+CB710_PORT_ACCESSORS(32)
+
+void cb710_pci_update_config_reg(struct pci_dev *pdev,
+	int reg, uint32_t and, uint32_t xor);
+void cb710_set_irq_handler(struct cb710_slot *slot,
+	cb710_irq_handler_t handler);
+
+/* some device struct walking */
+
+static inline struct cb710_slot *cb710_pdev_to_slot(
+	struct platform_device *pdev)
+{
+	return container_of(pdev, struct cb710_slot, pdev);
+}
+
+static inline struct cb710_chip *cb710_slot_to_chip(struct cb710_slot *slot)
+{
+	return dev_get_drvdata(slot->pdev.dev.parent);
+}
+
+static inline struct device *cb710_slot_dev(struct cb710_slot *slot)
+{
+	return &slot->pdev.dev;
+}
+
+static inline struct device *cb710_chip_dev(struct cb710_chip *chip)
+{
+	return &chip->pdev->dev;
+}
+
+/* debugging aids */
+
+#ifdef CONFIG_CB710_DEBUG
+void cb710_dump_regs(struct cb710_chip *chip, unsigned dump);
+#else
+#define cb710_dump_regs(c, d) do {} while (0)
+#endif
+
+#define CB710_DUMP_REGS_MMC	0x0F
+#define CB710_DUMP_REGS_MS	0x30
+#define CB710_DUMP_REGS_SM	0xC0
+#define CB710_DUMP_REGS_ALL	0xFF
+#define CB710_DUMP_REGS_MASK	0xFF
+
+#define CB710_DUMP_ACCESS_8	0x100
+#define CB710_DUMP_ACCESS_16	0x200
+#define CB710_DUMP_ACCESS_32	0x400
+#define CB710_DUMP_ACCESS_ALL	0x700
+#define CB710_DUMP_ACCESS_MASK	0x700
+
+#endif /* LINUX_CB710_DRIVER_H */
+/*
+ *  cb710/sgbuf2.h
+ *
+ *  Copyright by Michał Mirosław, 2008-2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef LINUX_CB710_SG_H
+#define LINUX_CB710_SG_H
+
+#include <linux/highmem.h>
+#include <linux/scatterlist.h>
+
+/*
+ * 32-bit PIO mapping sg iterator
+ *
+ * Hides scatterlist access issues - fragment boundaries, alignment, page
+ * mapping - for drivers using 32-bit-word-at-a-time-PIO (ie. PCI devices
+ * without DMA support).
+ *
+ * Best-case reading (transfer from device):
+ *   sg_miter_start(, SG_MITER_TO_SG);
+ *   cb710_sg_dwiter_write_from_io();
+ *   sg_miter_stop();
+ *
+ * Best-case writing (transfer to device):
+ *   sg_miter_start(, SG_MITER_FROM_SG);
+ *   cb710_sg_dwiter_read_to_io();
+ *   sg_miter_stop();
+ */
+
+uint32_t cb710_sg_dwiter_read_next_block(struct sg_mapping_iter *miter);
+void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t data);
+
+/**
+ * cb710_sg_dwiter_write_from_io - transfer data to mapped buffer from 32-bit IO port
+ * @miter: sg mapping iter
+ * @port: PIO port - IO or MMIO address
+ * @count: number of 32-bit words to transfer
+ *
+ * Description:
+ *   Reads @count 32-bit words from register @port and stores it in
+ *   buffer iterated by @miter.  Data that would overflow the buffer
+ *   is silently ignored.  Iterator is advanced by 4*@count bytes
+ *   or to the buffer's end whichever is closer.
+ *
+ * Context:
+ *   IRQ disabled if the SG_MITER_ATOMIC is set.  Don't care otherwise.
+ */
+static inline void cb710_sg_dwiter_write_from_io(struct sg_mapping_iter *miter,
+	void __iomem *port, size_t count)
+{
+	while (count-- > 0)
+		cb710_sg_dwiter_write_next_block(miter, ioread32(port));
+}
+
+/**
+ * cb710_sg_dwiter_read_to_io - transfer data to 32-bit IO port from mapped buffer
+ * @miter: sg mapping iter
+ * @port: PIO port - IO or MMIO address
+ * @count: number of 32-bit words to transfer
+ *
+ * Description:
+ *   Writes @count 32-bit words to register @port from buffer iterated
+ *   through @miter.  If buffer ends before @count words are written
+ *   missing data is replaced by zeroes. @miter is advanced by 4*@count
+ *   bytes or to the buffer's end whichever is closer.
+ *
+ * Context:
+ *   IRQ disabled if the SG_MITER_ATOMIC is set.  Don't care otherwise.
+ */
+static inline void cb710_sg_dwiter_read_to_io(struct sg_mapping_iter *miter,
+	void __iomem *port, size_t count)
+{
+	while (count-- > 0)
+		iowrite32(cb710_sg_dwiter_read_next_block(miter), port);
+}
+
+#endif /* LINUX_CB710_SG_H */
diff --git a/include/linux/cciss_defs.h b/include/linux/cciss_defs.h
new file mode 100644
index 00000000..316b670d
--- /dev/null
+++ b/include/linux/cciss_defs.h
@@ -0,0 +1,130 @@
+#ifndef CCISS_DEFS_H
+#define CCISS_DEFS_H
+
+#include <linux/types.h>
+
+/* general boundary definitions */
+#define SENSEINFOBYTES          32 /* note that this value may vary
+				      between host implementations */
+
+/* Command Status value */
+#define CMD_SUCCESS             0x0000
+#define CMD_TARGET_STATUS       0x0001
+#define CMD_DATA_UNDERRUN       0x0002
+#define CMD_DATA_OVERRUN        0x0003
+#define CMD_INVALID             0x0004
+#define CMD_PROTOCOL_ERR        0x0005
+#define CMD_HARDWARE_ERR        0x0006
+#define CMD_CONNECTION_LOST     0x0007
+#define CMD_ABORTED             0x0008
+#define CMD_ABORT_FAILED        0x0009
+#define CMD_UNSOLICITED_ABORT   0x000A
+#define CMD_TIMEOUT             0x000B
+#define CMD_UNABORTABLE		0x000C
+
+/* transfer direction */
+#define XFER_NONE               0x00
+#define XFER_WRITE              0x01
+#define XFER_READ               0x02
+#define XFER_RSVD               0x03
+
+/* task attribute */
+#define ATTR_UNTAGGED           0x00
+#define ATTR_SIMPLE             0x04
+#define ATTR_HEADOFQUEUE        0x05
+#define ATTR_ORDERED            0x06
+#define ATTR_ACA                0x07
+
+/* cdb type */
+#define TYPE_CMD				0x00
+#define TYPE_MSG				0x01
+
+/* Type defs used in the following structs */
+#define BYTE __u8
+#define WORD __u16
+#define HWORD __u16
+#define DWORD __u32
+
+#define CISS_MAX_LUN	1024
+
+#define LEVEL2LUN   1 /* index into Target(x) structure, due to byte swapping */
+#define LEVEL3LUN   0
+
+#pragma pack(1)
+
+/* Command List Structure */
+typedef union _SCSI3Addr_struct {
+   struct {
+    BYTE Dev;
+    BYTE Bus:6;
+    BYTE Mode:2;        /* b00 */
+  } PeripDev;
+   struct {
+    BYTE DevLSB;
+    BYTE DevMSB:6;
+    BYTE Mode:2;        /* b01 */
+  } LogDev;
+   struct {
+    BYTE Dev:5;
+    BYTE Bus:3;
+    BYTE Targ:6;
+    BYTE Mode:2;        /* b10 */
+  } LogUnit;
+} SCSI3Addr_struct;
+
+typedef struct _PhysDevAddr_struct {
+  DWORD             TargetId:24;
+  DWORD             Bus:6;
+  DWORD             Mode:2;
+  SCSI3Addr_struct  Target[2]; /* 2 level target device addr */
+} PhysDevAddr_struct;
+
+typedef struct _LogDevAddr_struct {
+  DWORD            VolId:30;
+  DWORD            Mode:2;
+  BYTE             reserved[4];
+} LogDevAddr_struct;
+
+typedef union _LUNAddr_struct {
+  BYTE               LunAddrBytes[8];
+  SCSI3Addr_struct   SCSI3Lun[4];
+  PhysDevAddr_struct PhysDev;
+  LogDevAddr_struct  LogDev;
+} LUNAddr_struct;
+
+typedef struct _RequestBlock_struct {
+  BYTE   CDBLen;
+  struct {
+    BYTE Type:3;
+    BYTE Attribute:3;
+    BYTE Direction:2;
+  } Type;
+  HWORD  Timeout;
+  BYTE   CDB[16];
+} RequestBlock_struct;
+
+typedef union _MoreErrInfo_struct{
+  struct {
+    BYTE  Reserved[3];
+    BYTE  Type;
+    DWORD ErrorInfo;
+  } Common_Info;
+  struct{
+    BYTE  Reserved[2];
+    BYTE  offense_size; /* size of offending entry */
+    BYTE  offense_num;  /* byte # of offense 0-base */
+    DWORD offense_value;
+  } Invalid_Cmd;
+} MoreErrInfo_struct;
+typedef struct _ErrorInfo_struct {
+  BYTE               ScsiStatus;
+  BYTE               SenseLen;
+  HWORD              CommandStatus;
+  DWORD              ResidualCnt;
+  MoreErrInfo_struct MoreErrInfo;
+  BYTE               SenseInfo[SENSEINFOBYTES];
+} ErrorInfo_struct;
+
+#pragma pack()
+
+#endif /* CCISS_DEFS_H */
diff --git a/include/linux/cciss_ioctl.h b/include/linux/cciss_ioctl.h
new file mode 100644
index 00000000..986493f5
--- /dev/null
+++ b/include/linux/cciss_ioctl.h
@@ -0,0 +1,115 @@
+#ifndef CCISS_IOCTLH
+#define CCISS_IOCTLH
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+#include <linux/cciss_defs.h>
+
+#define CCISS_IOC_MAGIC 'B'
+
+
+typedef struct _cciss_pci_info_struct
+{
+	unsigned char 	bus;
+	unsigned char 	dev_fn;
+	unsigned short	domain;
+	__u32 		board_id;
+} cciss_pci_info_struct; 
+
+typedef struct _cciss_coalint_struct
+{
+	__u32  delay;
+	__u32  count;
+} cciss_coalint_struct;
+
+typedef char NodeName_type[16];
+
+typedef __u32 Heartbeat_type;
+
+#define CISS_PARSCSIU2 	0x0001
+#define CISS_PARCSCIU3 	0x0002
+#define CISS_FIBRE1G	0x0100
+#define CISS_FIBRE2G	0x0200
+typedef __u32 BusTypes_type;
+
+typedef char FirmwareVer_type[4];
+typedef __u32 DriverVer_type;
+
+#define MAX_KMALLOC_SIZE 128000
+
+typedef struct _IOCTL_Command_struct {
+  LUNAddr_struct	   LUN_info;
+  RequestBlock_struct      Request;
+  ErrorInfo_struct  	   error_info; 
+  WORD			   buf_size;  /* size in bytes of the buf */
+  BYTE			   __user *buf;
+} IOCTL_Command_struct;
+
+typedef struct _BIG_IOCTL_Command_struct {
+  LUNAddr_struct	   LUN_info;
+  RequestBlock_struct      Request;
+  ErrorInfo_struct  	   error_info;
+  DWORD			   malloc_size; /* < MAX_KMALLOC_SIZE in cciss.c */
+  DWORD			   buf_size;    /* size in bytes of the buf */
+  				        /* < malloc_size * MAXSGENTRIES */
+  BYTE			   __user *buf;
+} BIG_IOCTL_Command_struct;
+
+typedef struct _LogvolInfo_struct{
+	__u32	LunID;
+	int	num_opens;  /* number of opens on the logical volume */
+	int	num_parts;  /* number of partitions configured on logvol */
+} LogvolInfo_struct;
+
+#define CCISS_GETPCIINFO _IOR(CCISS_IOC_MAGIC, 1, cciss_pci_info_struct)
+
+#define CCISS_GETINTINFO _IOR(CCISS_IOC_MAGIC, 2, cciss_coalint_struct)
+#define CCISS_SETINTINFO _IOW(CCISS_IOC_MAGIC, 3, cciss_coalint_struct)
+
+#define CCISS_GETNODENAME _IOR(CCISS_IOC_MAGIC, 4, NodeName_type)
+#define CCISS_SETNODENAME _IOW(CCISS_IOC_MAGIC, 5, NodeName_type)
+
+#define CCISS_GETHEARTBEAT _IOR(CCISS_IOC_MAGIC, 6, Heartbeat_type)
+#define CCISS_GETBUSTYPES  _IOR(CCISS_IOC_MAGIC, 7, BusTypes_type)
+#define CCISS_GETFIRMVER   _IOR(CCISS_IOC_MAGIC, 8, FirmwareVer_type)
+#define CCISS_GETDRIVVER   _IOR(CCISS_IOC_MAGIC, 9, DriverVer_type)
+#define CCISS_REVALIDVOLS  _IO(CCISS_IOC_MAGIC, 10)
+#define CCISS_PASSTHRU	   _IOWR(CCISS_IOC_MAGIC, 11, IOCTL_Command_struct)
+#define CCISS_DEREGDISK	   _IO(CCISS_IOC_MAGIC, 12)
+
+/* no longer used... use REGNEWD instead */ 
+#define CCISS_REGNEWDISK  _IOW(CCISS_IOC_MAGIC, 13, int)
+
+#define CCISS_REGNEWD	   _IO(CCISS_IOC_MAGIC, 14)
+#define CCISS_RESCANDISK   _IO(CCISS_IOC_MAGIC, 16)
+#define CCISS_GETLUNINFO   _IOR(CCISS_IOC_MAGIC, 17, LogvolInfo_struct)
+#define CCISS_BIG_PASSTHRU _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL_Command_struct)
+
+#ifdef __KERNEL__
+#ifdef CONFIG_COMPAT
+
+/* 32 bit compatible ioctl structs */
+typedef struct _IOCTL32_Command_struct {
+  LUNAddr_struct	   LUN_info;
+  RequestBlock_struct      Request;
+  ErrorInfo_struct  	   error_info;
+  WORD			   buf_size;  /* size in bytes of the buf */
+  __u32			   buf; /* 32 bit pointer to data buffer */
+} IOCTL32_Command_struct;
+
+typedef struct _BIG_IOCTL32_Command_struct {
+  LUNAddr_struct	   LUN_info;
+  RequestBlock_struct      Request;
+  ErrorInfo_struct  	   error_info;
+  DWORD			   malloc_size; /* < MAX_KMALLOC_SIZE in cciss.c */
+  DWORD			   buf_size;    /* size in bytes of the buf */
+  				        /* < malloc_size * MAXSGENTRIES */
+  __u32 		buf;	/* 32 bit pointer to data buffer */
+} BIG_IOCTL32_Command_struct;
+
+#define CCISS_PASSTHRU32   _IOWR(CCISS_IOC_MAGIC, 11, IOCTL32_Command_struct)
+#define CCISS_BIG_PASSTHRU32 _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL32_Command_struct)
+
+#endif /* CONFIG_COMPAT */
+#endif /* __KERNEL__ */
+#endif  
diff --git a/include/linux/cd1400.h b/include/linux/cd1400.h
new file mode 100644
index 00000000..1dc3ab05
--- /dev/null
+++ b/include/linux/cd1400.h
@@ -0,0 +1,292 @@
+/*****************************************************************************/
+
+/*
+ *	cd1400.h  -- cd1400 UART hardware info.
+ *
+ *	Copyright (C) 1996-1998  Stallion Technologies
+ *	Copyright (C) 1994-1996  Greg Ungerer.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License
+ *	along with this program; if not, write to the Free Software
+ *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*****************************************************************************/
+#ifndef	_CD1400_H
+#define	_CD1400_H
+/*****************************************************************************/
+
+/*
+ *	Define the number of async ports per cd1400 uart chip.
+ */
+#define	CD1400_PORTS		4
+
+/*
+ *	Define the cd1400 uarts internal FIFO sizes.
+ */
+#define	CD1400_TXFIFOSIZE	12
+#define	CD1400_RXFIFOSIZE	12
+
+/*
+ *	Local RX FIFO thresh hold level. Also define the RTS thresh hold
+ *	based on the RX thresh hold.
+ */
+#define	FIFO_RXTHRESHOLD	6
+#define	FIFO_RTSTHRESHOLD	7
+
+/*****************************************************************************/
+
+/*
+ *	Define the cd1400 register addresses. These are all the valid
+ *	registers with the cd1400. Some are global, some virtual, some
+ *	per port.
+ */
+#define	GFRCR		0x40
+#define	CAR		0x68
+#define	GCR		0x4b
+#define	SVRR		0x67
+#define	RICR		0x44
+#define	TICR		0x45
+#define	MICR		0x46
+#define	RIR		0x6b
+#define	TIR		0x6a
+#define	MIR		0x69
+#define	PPR		0x7e
+
+#define	RIVR		0x43
+#define	TIVR		0x42
+#define	MIVR		0x41
+#define	TDR		0x63
+#define	RDSR		0x62
+#define	MISR		0x4c
+#define	EOSRR		0x60
+
+#define	LIVR		0x18
+#define	CCR		0x05
+#define	SRER		0x06
+#define	COR1		0x08
+#define	COR2		0x09
+#define	COR3		0x0a
+#define	COR4		0x1e
+#define	COR5		0x1f
+#define	CCSR		0x0b
+#define	RDCR		0x0e
+#define	SCHR1		0x1a
+#define	SCHR2		0x1b
+#define	SCHR3		0x1c
+#define	SCHR4		0x1d
+#define	SCRL		0x22
+#define	SCRH		0x23
+#define	LNC		0x24
+#define	MCOR1		0x15
+#define	MCOR2		0x16
+#define	RTPR		0x21
+#define	MSVR1		0x6c
+#define	MSVR2		0x6d
+#define	PSVR		0x6f
+#define	RBPR		0x78
+#define	RCOR		0x7c
+#define	TBPR		0x72
+#define	TCOR		0x76
+
+/*****************************************************************************/
+
+/*
+ *	Define the set of baud rate clock divisors.
+ */
+#define	CD1400_CLK0	8
+#define	CD1400_CLK1	32
+#define	CD1400_CLK2	128
+#define	CD1400_CLK3	512
+#define	CD1400_CLK4	2048
+
+#define	CD1400_NUMCLKS	5
+
+/*****************************************************************************/
+
+/*
+ *	Define the clock pre-scalar value to be a 5 ms clock. This should be
+ *	OK for now. It would probably be better to make it 10 ms, but we
+ *	can't fit that divisor into 8 bits!
+ */
+#define	PPR_SCALAR	244
+
+/*****************************************************************************/
+
+/*
+ *	Define values used to set character size options.
+ */
+#define	COR1_CHL5	0x00
+#define	COR1_CHL6	0x01
+#define	COR1_CHL7	0x02
+#define	COR1_CHL8	0x03
+
+/*
+ *	Define values used to set the number of stop bits.
+ */
+#define	COR1_STOP1	0x00
+#define	COR1_STOP15	0x04
+#define	COR1_STOP2	0x08
+
+/*
+ *	Define values used to set the parity scheme in use.
+ */
+#define	COR1_PARNONE	0x00
+#define	COR1_PARFORCE	0x20
+#define	COR1_PARENB	0x40
+#define	COR1_PARIGNORE	0x10
+
+#define	COR1_PARODD	0x80
+#define	COR1_PAREVEN	0x00
+
+#define	COR2_IXM	0x80
+#define	COR2_TXIBE	0x40
+#define	COR2_ETC	0x20
+#define	COR2_LLM	0x10
+#define	COR2_RLM	0x08
+#define	COR2_RTSAO	0x04
+#define	COR2_CTSAE	0x02
+
+#define	COR3_SCDRNG	0x80
+#define	COR3_SCD34	0x40
+#define	COR3_FCT	0x20
+#define	COR3_SCD12	0x10
+
+/*
+ *	Define values used by COR4.
+ */
+#define	COR4_BRKINT	0x08
+#define	COR4_IGNBRK	0x18
+
+/*****************************************************************************/
+
+/*
+ *	Define the modem control register values.
+ *	Note that the actual hardware is a little different to the conventional
+ *	pin names on the cd1400.
+ */
+#define	MSVR1_DTR	0x01
+#define	MSVR1_DSR	0x10
+#define	MSVR1_RI	0x20
+#define	MSVR1_CTS	0x40
+#define	MSVR1_DCD	0x80
+
+#define	MSVR2_RTS	0x02
+#define	MSVR2_DSR	0x10
+#define	MSVR2_RI	0x20
+#define	MSVR2_CTS	0x40
+#define	MSVR2_DCD	0x80
+
+#define	MCOR1_DCD	0x80
+#define	MCOR1_CTS	0x40
+#define	MCOR1_RI	0x20
+#define	MCOR1_DSR	0x10
+
+#define	MCOR2_DCD	0x80
+#define	MCOR2_CTS	0x40
+#define	MCOR2_RI	0x20
+#define	MCOR2_DSR	0x10
+
+/*****************************************************************************/
+
+/*
+ *	Define the bits used with the service (interrupt) enable register.
+ */
+#define	SRER_NNDT	0x01
+#define	SRER_TXEMPTY	0x02
+#define	SRER_TXDATA	0x04
+#define	SRER_RXDATA	0x10
+#define	SRER_MODEM	0x80
+
+/*****************************************************************************/
+
+/*
+ *	Define operational commands for the command register.
+ */
+#define	CCR_RESET	0x80
+#define	CCR_CORCHANGE	0x4e
+#define	CCR_SENDCH	0x20
+#define	CCR_CHANCTRL	0x10
+
+#define	CCR_TXENABLE	(CCR_CHANCTRL | 0x08)
+#define	CCR_TXDISABLE	(CCR_CHANCTRL | 0x04)
+#define	CCR_RXENABLE	(CCR_CHANCTRL | 0x02)
+#define	CCR_RXDISABLE	(CCR_CHANCTRL | 0x01)
+
+#define	CCR_SENDSCHR1	(CCR_SENDCH | 0x01)
+#define	CCR_SENDSCHR2	(CCR_SENDCH | 0x02)
+#define	CCR_SENDSCHR3	(CCR_SENDCH | 0x03)
+#define	CCR_SENDSCHR4	(CCR_SENDCH | 0x04)
+
+#define	CCR_RESETCHAN	(CCR_RESET | 0x00)
+#define	CCR_RESETFULL	(CCR_RESET | 0x01)
+#define	CCR_TXFLUSHFIFO	(CCR_RESET | 0x02)
+
+#define	CCR_MAXWAIT	10000
+
+/*****************************************************************************/
+
+/*
+ *	Define the valid acknowledgement types (for hw ack cycle).
+ */
+#define	ACK_TYPMASK	0x07
+#define	ACK_TYPTX	0x02
+#define	ACK_TYPMDM	0x01
+#define	ACK_TYPRXGOOD	0x03
+#define	ACK_TYPRXBAD	0x07
+
+#define	SVRR_RX		0x01
+#define	SVRR_TX		0x02
+#define	SVRR_MDM	0x04
+
+#define	ST_OVERRUN	0x01
+#define	ST_FRAMING	0x02
+#define	ST_PARITY	0x04
+#define	ST_BREAK	0x08
+#define	ST_SCHAR1	0x10
+#define	ST_SCHAR2	0x20
+#define	ST_SCHAR3	0x30
+#define	ST_SCHAR4	0x40
+#define	ST_RANGE	0x70
+#define	ST_SCHARMASK	0x70
+#define	ST_TIMEOUT	0x80
+
+#define	MISR_DCD	0x80
+#define	MISR_CTS	0x40
+#define	MISR_RI		0x20
+#define	MISR_DSR	0x10
+
+/*****************************************************************************/
+
+/*
+ *	Defines for the CCSR status register.
+ */
+#define	CCSR_RXENABLED	0x80
+#define	CCSR_RXFLOWON	0x40
+#define	CCSR_RXFLOWOFF	0x20
+#define	CCSR_TXENABLED	0x08
+#define	CCSR_TXFLOWON	0x04
+#define	CCSR_TXFLOWOFF	0x02
+
+/*****************************************************************************/
+
+/*
+ *	Define the embedded commands.
+ */
+#define	ETC_CMD		0x00
+#define	ETC_STARTBREAK	0x81
+#define	ETC_DELAY	0x82
+#define	ETC_STOPBREAK	0x83
+
+/*****************************************************************************/
+#endif
diff --git a/include/linux/cdev.h b/include/linux/cdev.h
new file mode 100644
index 00000000..fb459197
--- /dev/null
+++ b/include/linux/cdev.h
@@ -0,0 +1,35 @@
+#ifndef _LINUX_CDEV_H
+#define _LINUX_CDEV_H
+
+#include <linux/kobject.h>
+#include <linux/kdev_t.h>
+#include <linux/list.h>
+
+struct file_operations;
+struct inode;
+struct module;
+
+struct cdev {
+	struct kobject kobj;
+	struct module *owner;
+	const struct file_operations *ops;
+	struct list_head list;
+	dev_t dev;
+	unsigned int count;
+};
+
+void cdev_init(struct cdev *, const struct file_operations *);
+
+struct cdev *cdev_alloc(void);
+
+void cdev_put(struct cdev *p);
+
+int cdev_add(struct cdev *, dev_t, unsigned);
+
+void cdev_del(struct cdev *);
+
+void cd_forget(struct inode *);
+
+extern struct backing_dev_info directly_mappable_cdev_bdi;
+
+#endif
diff --git a/include/linux/cdk.h b/include/linux/cdk.h
new file mode 100644
index 00000000..80093a8d
--- /dev/null
+++ b/include/linux/cdk.h
@@ -0,0 +1,486 @@
+/*****************************************************************************/
+
+/*
+ *	cdk.h  -- CDK interface definitions.
+ *
+ *	Copyright (C) 1996-1998  Stallion Technologies
+ *	Copyright (C) 1994-1996  Greg Ungerer.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License
+ *	along with this program; if not, write to the Free Software
+ *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*****************************************************************************/
+#ifndef	_CDK_H
+#define	_CDK_H
+/*****************************************************************************/
+
+#pragma	pack(2)
+
+/*
+ *	The following set of definitions is used to communicate with the
+ *	shared memory interface of the Stallion intelligent multiport serial
+ *	boards. The definitions in this file are taken directly from the
+ *	document titled "Generic Stackable Interface, Downloader and
+ *	Communications Development Kit".
+ */
+
+/*
+ *	Define the set of important shared memory addresses. These are
+ *	required to initialize the board and get things started. All of these
+ *	addresses are relative to the start of the shared memory.
+ */
+#define	CDK_SIGADDR	0x200
+#define	CDK_FEATADDR	0x280
+#define	CDK_CDKADDR	0x300
+#define	CDK_RDYADDR	0x262
+
+#define	CDK_ALIVEMARKER	13
+
+/*
+ *	On hardware power up the ROMs located on the EasyConnection 8/64 will
+ *	fill out the following signature information into shared memory. This
+ *	way the host system can quickly determine that the board is present
+ *	and is operational.
+ */
+typedef struct cdkecpsig {
+	unsigned long	magic;
+	unsigned short	romver;
+	unsigned short	cputype;
+	unsigned char	panelid[8];
+} cdkecpsig_t;
+
+#define	ECP_MAGIC	0x21504345
+
+/*
+ *	On hardware power up the ROMs located on the ONboard, Stallion and
+ *	Brumbys will fill out the following signature information into shared
+ *	memory. This way the host system can quickly determine that the board
+ *	is present and is operational.
+ */
+typedef struct cdkonbsig {
+	unsigned short	magic0;
+	unsigned short	magic1;
+	unsigned short	magic2;
+	unsigned short	magic3;
+	unsigned short	romver;
+	unsigned short	memoff;
+	unsigned short	memseg;
+	unsigned short	amask0;
+	unsigned short	pic;
+	unsigned short	status;
+	unsigned short	btype;
+	unsigned short	clkticks;
+	unsigned short	clkspeed;
+	unsigned short	amask1;
+	unsigned short	amask2;
+} cdkonbsig_t;
+
+#define	ONB_MAGIC0	0xf2a7
+#define	ONB_MAGIC1	0xa149
+#define	ONB_MAGIC2	0x6352
+#define	ONB_MAGIC3	0xf121
+
+/*
+ *	Define the feature area structure. The feature area is the set of
+ *	startup parameters used by the slave image when it starts executing.
+ *	They allow for the specification of buffer sizes, debug trace, etc.
+ */
+typedef struct cdkfeature {
+	unsigned long	debug;
+	unsigned long	banner;
+	unsigned long	etype;
+	unsigned long	nrdevs;
+	unsigned long	brdspec;
+	unsigned long	txrqsize;
+	unsigned long	rxrqsize;
+	unsigned long	flags;
+} cdkfeature_t;
+
+#define	ETYP_DDK	0
+#define	ETYP_CDK	1
+
+/*
+ *	Define the CDK header structure. This is the info that the slave
+ *	environment sets up after it has been downloaded and started. It
+ *	essentially provides a memory map for the shared memory interface.
+ */
+typedef struct cdkhdr {
+	unsigned short	command;
+	unsigned short	status;
+	unsigned short	port;
+	unsigned short	mode;
+	unsigned long	cmd_buf[14];
+	unsigned short	alive_cnt;
+	unsigned short	intrpt_mode;
+	unsigned char	intrpt_id[8];
+	unsigned char	ver_release;
+	unsigned char	ver_modification;
+	unsigned char	ver_fix;
+	unsigned char	deadman_restart;
+	unsigned short	deadman;
+	unsigned short	nrdevs;
+	unsigned long	memp;
+	unsigned long	hostp;
+	unsigned long	slavep;
+	unsigned char	hostreq;
+	unsigned char	slavereq;
+	unsigned char	cmd_reserved[30];
+} cdkhdr_t;
+
+#define	MODE_DDK	0
+#define	MODE_CDK	1
+
+#define	IMD_INTR	0x0
+#define	IMD_PPINTR	0x1
+#define	IMD_POLL	0xff
+
+/*
+ *	Define the memory mapping structure. This structure is pointed to by
+ *	the memp field in the stlcdkhdr struct. As many as these structures
+ *	as required are laid out in shared memory to define how the rest of
+ *	shared memory is divided up. There will be one for each port.
+ */
+typedef struct cdkmem {
+	unsigned short	dtype;
+	unsigned long	offset;
+} cdkmem_t;
+
+#define	TYP_UNDEFINED	0x0
+#define	TYP_ASYNCTRL	0x1
+#define	TYP_ASYNC	0x20
+#define	TYP_PARALLEL	0x40
+#define	TYP_SYNCX21	0x60
+
+/*****************************************************************************/
+
+/*
+ *	Following is a set of defines and structures used to actually deal
+ *	with the serial ports on the board. Firstly is the set of commands
+ *	that can be applied to ports.
+ */
+#define	ASYCMD		(((unsigned long) 'a') << 8)
+
+#define	A_NULL		(ASYCMD | 0)
+#define	A_FLUSH		(ASYCMD | 1)
+#define	A_BREAK		(ASYCMD | 2)
+#define	A_GETPORT	(ASYCMD | 3)
+#define	A_SETPORT	(ASYCMD | 4)
+#define	A_SETPORTF	(ASYCMD | 5)
+#define	A_SETPORTFTX	(ASYCMD | 6)
+#define	A_SETPORTFRX	(ASYCMD | 7)
+#define	A_GETSIGNALS	(ASYCMD | 8)
+#define	A_SETSIGNALS	(ASYCMD | 9)
+#define	A_SETSIGNALSF	(ASYCMD | 10)
+#define	A_SETSIGNALSFTX	(ASYCMD | 11)
+#define	A_SETSIGNALSFRX	(ASYCMD | 12)
+#define	A_GETNOTIFY	(ASYCMD | 13)
+#define	A_SETNOTIFY	(ASYCMD | 14)
+#define	A_NOTIFY	(ASYCMD | 15)
+#define	A_PORTCTRL	(ASYCMD | 16)
+#define	A_GETSTATS	(ASYCMD | 17)
+#define	A_RQSTATE	(ASYCMD | 18)
+#define	A_FLOWSTATE	(ASYCMD | 19)
+#define	A_CLEARSTATS	(ASYCMD | 20)
+
+/*
+ *	Define those arguments used for simple commands.
+ */
+#define	FLUSHRX		0x1
+#define	FLUSHTX		0x2
+
+#define	BREAKON		-1
+#define	BREAKOFF	-2
+
+/*
+ *	Define the port setting structure, and all those defines that go along
+ *	with it. Basically this structure defines the characteristics of this
+ *	port: baud rate, chars, parity, input/output char cooking etc.
+ */
+typedef struct asyport {
+	unsigned long	baudout;
+	unsigned long	baudin;
+	unsigned long	iflag;
+	unsigned long	oflag;
+	unsigned long	lflag;
+	unsigned long	pflag;
+	unsigned long	flow;
+	unsigned long	spare1;
+	unsigned short	vtime;
+	unsigned short	vmin;
+	unsigned short	txlo;
+	unsigned short	txhi;
+	unsigned short	rxlo;
+	unsigned short	rxhi;
+	unsigned short	rxhog;
+	unsigned short	spare2;
+	unsigned char	csize;
+	unsigned char	stopbs;
+	unsigned char	parity;
+	unsigned char	stopin;
+	unsigned char	startin;
+	unsigned char	stopout;
+	unsigned char	startout;
+	unsigned char	parmark;
+	unsigned char	brkmark;
+	unsigned char	cc[11];
+} asyport_t;
+
+#define	PT_STOP1	0x0
+#define	PT_STOP15	0x1
+#define	PT_STOP2	0x2
+
+#define	PT_NOPARITY	0x0
+#define	PT_ODDPARITY	0x1
+#define	PT_EVENPARITY	0x2
+#define	PT_MARKPARITY	0x3
+#define	PT_SPACEPARITY	0x4
+
+#define	F_NONE		0x0
+#define	F_IXON		0x1
+#define	F_IXOFF		0x2
+#define	F_IXANY		0x4
+#define	F_IOXANY	0x8
+#define	F_RTSFLOW	0x10
+#define	F_CTSFLOW	0x20
+#define	F_DTRFLOW	0x40
+#define	F_DCDFLOW	0x80
+#define	F_DSROFLOW	0x100
+#define	F_DSRIFLOW	0x200
+
+#define	FI_NORX		0x1
+#define	FI_RAW		0x2
+#define	FI_ISTRIP	0x4
+#define	FI_UCLC		0x8
+#define	FI_INLCR	0x10
+#define	FI_ICRNL	0x20
+#define	FI_IGNCR	0x40
+#define	FI_IGNBREAK	0x80
+#define	FI_DSCRDBREAK	0x100
+#define	FI_1MARKBREAK	0x200
+#define	FI_2MARKBREAK	0x400
+#define	FI_XCHNGBREAK	0x800
+#define	FI_IGNRXERRS	0x1000
+#define	FI_DSCDRXERRS	0x2000
+#define	FI_1MARKRXERRS	0x4000
+#define	FI_2MARKRXERRS	0x8000
+#define	FI_XCHNGRXERRS	0x10000
+#define	FI_DSCRDNULL	0x20000
+
+#define	FO_OLCUC	0x1
+#define	FO_ONLCR	0x2
+#define	FO_OOCRNL	0x4
+#define	FO_ONOCR	0x8
+#define	FO_ONLRET	0x10
+#define	FO_ONL		0x20
+#define	FO_OBS		0x40
+#define	FO_OVT		0x80
+#define	FO_OFF		0x100
+#define	FO_OTAB1	0x200
+#define	FO_OTAB2	0x400
+#define	FO_OTAB3	0x800
+#define	FO_OCR1		0x1000
+#define	FO_OCR2		0x2000
+#define	FO_OCR3		0x4000
+#define	FO_OFILL	0x8000
+#define	FO_ODELL	0x10000
+
+#define	P_RTSLOCK	0x1
+#define	P_CTSLOCK	0x2
+#define	P_MAPRTS	0x4
+#define	P_MAPCTS	0x8
+#define	P_LOOPBACK	0x10
+#define	P_DTRFOLLOW	0x20
+#define	P_FAKEDCD	0x40
+
+#define	P_RXIMIN	0x10000
+#define	P_RXITIME	0x20000
+#define	P_RXTHOLD	0x40000
+
+/*
+ *	Define a structure to communicate serial port signal and data state
+ *	information.
+ */
+typedef struct asysigs {
+	unsigned long	data;
+	unsigned long	signal;
+	unsigned long	sigvalue;
+} asysigs_t;
+
+#define	DT_TXBUSY	0x1
+#define	DT_TXEMPTY	0x2
+#define	DT_TXLOW	0x4
+#define	DT_TXHIGH	0x8
+#define	DT_TXFULL	0x10
+#define	DT_TXHOG	0x20
+#define	DT_TXFLOWED	0x40
+#define	DT_TXBREAK	0x80
+
+#define	DT_RXBUSY	0x100
+#define	DT_RXEMPTY	0x200
+#define	DT_RXLOW	0x400
+#define	DT_RXHIGH	0x800
+#define	DT_RXFULL	0x1000
+#define	DT_RXHOG	0x2000
+#define	DT_RXFLOWED	0x4000
+#define	DT_RXBREAK	0x8000
+
+#define	SG_DTR		0x1
+#define	SG_DCD		0x2
+#define	SG_RTS		0x4
+#define	SG_CTS		0x8
+#define	SG_DSR		0x10
+#define	SG_RI		0x20
+
+/*
+ *	Define the notification setting structure. This is used to tell the
+ *	port what events we want to be informed about. Fields here use the
+ *	same defines as for the asysigs structure above.
+ */
+typedef struct asynotify {
+	unsigned long	ctrl;
+	unsigned long	data;
+	unsigned long	signal;
+	unsigned long	sigvalue;
+} asynotify_t;
+
+/*
+ *	Define the port control structure. It is used to do fine grain
+ *	control operations on the port.
+ */
+typedef struct {
+	unsigned long	rxctrl;
+	unsigned long	txctrl;
+	char		rximdch;
+	char		tximdch;
+	char		spare1;
+	char		spare2;
+} asyctrl_t;
+
+#define	CT_ENABLE	0x1
+#define	CT_DISABLE	0x2
+#define	CT_STOP		0x4
+#define	CT_START	0x8
+#define	CT_STARTFLOW	0x10
+#define	CT_STOPFLOW	0x20
+#define	CT_SENDCHR	0x40
+
+/*
+ *	Define the stats structure kept for each port. This is a useful set
+ *	of data collected for each port on the slave. The A_GETSTATS command
+ *	is used to retrieve this data from the slave.
+ */
+typedef struct asystats {
+	unsigned long	opens;
+	unsigned long	txchars;
+	unsigned long	rxchars;
+	unsigned long	txringq;
+	unsigned long	rxringq;
+	unsigned long	txmsgs;
+	unsigned long	rxmsgs;
+	unsigned long	txflushes;
+	unsigned long	rxflushes;
+	unsigned long	overruns;
+	unsigned long	framing;
+	unsigned long	parity;
+	unsigned long	ringover;
+	unsigned long	lost;
+	unsigned long	rxstart;
+	unsigned long	rxstop;
+	unsigned long	txstart;
+	unsigned long	txstop;
+	unsigned long	dcdcnt;
+	unsigned long	dtrcnt;
+	unsigned long	ctscnt;
+	unsigned long	rtscnt;
+	unsigned long	dsrcnt;
+	unsigned long	ricnt;
+	unsigned long	txbreaks;
+	unsigned long	rxbreaks;
+	unsigned long	signals;
+	unsigned long	state;
+	unsigned long	hwid;
+} asystats_t;
+
+/*****************************************************************************/
+
+/*
+ *	All command and control communication with a device on the slave is
+ *	via a control block in shared memory. Each device has its own control
+ *	block, defined by the following structure. The control block allows
+ *	the host to open, close and control the device on the slave.
+ */
+typedef struct cdkctrl {
+	unsigned char	open;
+	unsigned char	close;
+	unsigned long	openarg;
+	unsigned long	closearg;
+	unsigned long	cmd;
+	unsigned long	status;
+	unsigned long	args[32];
+} cdkctrl_t;
+
+/*
+ *	Each device on the slave passes data to and from the host via a ring
+ *	queue in shared memory. Define a ring queue structure to hold the
+ *	vital information about each ring queue. Two ring queues will be
+ *	allocated for each port, one for receive data and one for transmit
+ *	data.
+ */
+typedef struct cdkasyrq {
+	unsigned long	offset;
+	unsigned short	size;
+	unsigned short	head;
+	unsigned short	tail;
+} cdkasyrq_t;
+
+/*
+ *	Each asynchronous port is defined in shared memory by the following
+ *	structure. It contains a control block to command a device, and also
+ *	the necessary data channel information as well.
+ */
+typedef struct cdkasy {
+	cdkctrl_t	ctrl;
+	unsigned short	notify;
+	asynotify_t	changed;
+	unsigned short	receive;
+	cdkasyrq_t	rxq;
+	unsigned short	transmit;
+	cdkasyrq_t	txq;
+} cdkasy_t;
+
+#pragma	pack()
+
+/*****************************************************************************/
+
+/*
+ *	Define the set of ioctls used by the driver to do special things
+ *	to the board. These include interrupting it, and initializing
+ *	the driver after board startup and shutdown.
+ */
+#include <linux/ioctl.h>
+
+#define	STL_BINTR	_IO('s',20)
+#define	STL_BSTART	_IO('s',21)
+#define	STL_BSTOP	_IO('s',22)
+#define	STL_BRESET	_IO('s',23)
+
+/*
+ *	Define a set of ioctl extensions, used to get at special stuff.
+ */
+#define	STL_GETPFLAG	_IO('s',80)
+#define	STL_SETPFLAG	_IO('s',81)
+
+/*****************************************************************************/
+#endif
diff --git a/include/linux/cdrom.h b/include/linux/cdrom.h
new file mode 100644
index 00000000..dfd7f187
--- /dev/null
+++ b/include/linux/cdrom.h
@@ -0,0 +1,1214 @@
+/*
+ * -- <linux/cdrom.h>
+ * General header file for linux CD-ROM drivers 
+ * Copyright (C) 1992         David Giller, rafetmad@oxy.edu
+ *               1994, 1995   Eberhard Mönkeberg, emoenke@gwdg.de
+ *               1996         David van Leeuwen, david@tm.tno.nl
+ *               1997, 1998   Erik Andersen, andersee@debian.org
+ *               1998-2002    Jens Axboe, axboe@suse.de
+ */
+ 
+#ifndef	_LINUX_CDROM_H
+#define	_LINUX_CDROM_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/*******************************************************
+ * As of Linux 2.1.x, all Linux CD-ROM application programs will use this 
+ * (and only this) include file.  It is my hope to provide Linux with
+ * a uniform interface between software accessing CD-ROMs and the various 
+ * device drivers that actually talk to the drives.  There may still be
+ * 23 different kinds of strange CD-ROM drives, but at least there will 
+ * now be one, and only one, Linux CD-ROM interface.
+ *
+ * Additionally, as of Linux 2.1.x, all Linux application programs 
+ * should use the O_NONBLOCK option when opening a CD-ROM device 
+ * for subsequent ioctl commands.  This allows for neat system errors 
+ * like "No medium found" or "Wrong medium type" upon attempting to 
+ * mount or play an empty slot, mount an audio disc, or play a data disc.
+ * Generally, changing an application program to support O_NONBLOCK
+ * is as easy as the following:
+ *       -    drive = open("/dev/cdrom", O_RDONLY);
+ *       +    drive = open("/dev/cdrom", O_RDONLY | O_NONBLOCK);
+ * It is worth the small change.
+ *
+ *  Patches for many common CD programs (provided by David A. van Leeuwen)
+ *  can be found at:  ftp://ftp.gwdg.de/pub/linux/cdrom/drivers/cm206/
+ * 
+ *******************************************************/
+
+/* When a driver supports a certain function, but the cdrom drive we are 
+ * using doesn't, we will return the error EDRIVE_CANT_DO_THIS.  We will 
+ * borrow the "Operation not supported" error from the network folks to 
+ * accomplish this.  Maybe someday we will get a more targeted error code, 
+ * but this will do for now... */
+#define EDRIVE_CANT_DO_THIS  EOPNOTSUPP
+
+/*******************************************************
+ * The CD-ROM IOCTL commands  -- these should be supported by 
+ * all the various cdrom drivers.  For the CD-ROM ioctls, we 
+ * will commandeer byte 0x53, or 'S'.
+ *******************************************************/
+#define CDROMPAUSE		0x5301 /* Pause Audio Operation */ 
+#define CDROMRESUME		0x5302 /* Resume paused Audio Operation */
+#define CDROMPLAYMSF		0x5303 /* Play Audio MSF (struct cdrom_msf) */
+#define CDROMPLAYTRKIND		0x5304 /* Play Audio Track/index 
+                                           (struct cdrom_ti) */
+#define CDROMREADTOCHDR		0x5305 /* Read TOC header 
+                                           (struct cdrom_tochdr) */
+#define CDROMREADTOCENTRY	0x5306 /* Read TOC entry 
+                                           (struct cdrom_tocentry) */
+#define CDROMSTOP		0x5307 /* Stop the cdrom drive */
+#define CDROMSTART		0x5308 /* Start the cdrom drive */
+#define CDROMEJECT		0x5309 /* Ejects the cdrom media */
+#define CDROMVOLCTRL		0x530a /* Control output volume 
+                                           (struct cdrom_volctrl) */
+#define CDROMSUBCHNL		0x530b /* Read subchannel data 
+                                           (struct cdrom_subchnl) */
+#define CDROMREADMODE2		0x530c /* Read CDROM mode 2 data (2336 Bytes) 
+                                           (struct cdrom_read) */
+#define CDROMREADMODE1		0x530d /* Read CDROM mode 1 data (2048 Bytes)
+                                           (struct cdrom_read) */
+#define CDROMREADAUDIO		0x530e /* (struct cdrom_read_audio) */
+#define CDROMEJECT_SW		0x530f /* enable(1)/disable(0) auto-ejecting */
+#define CDROMMULTISESSION	0x5310 /* Obtain the start-of-last-session 
+                                           address of multi session disks 
+                                           (struct cdrom_multisession) */
+#define CDROM_GET_MCN		0x5311 /* Obtain the "Universal Product Code" 
+                                           if available (struct cdrom_mcn) */
+#define CDROM_GET_UPC		CDROM_GET_MCN  /* This one is deprecated, 
+                                          but here anyway for compatibility */
+#define CDROMRESET		0x5312 /* hard-reset the drive */
+#define CDROMVOLREAD		0x5313 /* Get the drive's volume setting 
+                                          (struct cdrom_volctrl) */
+#define CDROMREADRAW		0x5314	/* read data in raw mode (2352 Bytes)
+                                           (struct cdrom_read) */
+/* 
+ * These ioctls are used only used in aztcd.c and optcd.c
+ */
+#define CDROMREADCOOKED		0x5315	/* read data in cooked mode */
+#define CDROMSEEK		0x5316  /* seek msf address */
+  
+/*
+ * This ioctl is only used by the scsi-cd driver.  
+   It is for playing audio in logical block addressing mode.
+ */
+#define CDROMPLAYBLK		0x5317	/* (struct cdrom_blk) */
+
+/* 
+ * These ioctls are only used in optcd.c
+ */
+#define CDROMREADALL		0x5318	/* read all 2646 bytes */
+
+/* 
+ * These ioctls are (now) only in ide-cd.c for controlling 
+ * drive spindown time.  They should be implemented in the
+ * Uniform driver, via generic packet commands, GPCMD_MODE_SELECT_10,
+ * GPCMD_MODE_SENSE_10 and the GPMODE_POWER_PAGE...
+ *  -Erik
+ */
+#define CDROMGETSPINDOWN        0x531d
+#define CDROMSETSPINDOWN        0x531e
+
+/* 
+ * These ioctls are implemented through the uniform CD-ROM driver
+ * They _will_ be adopted by all CD-ROM drivers, when all the CD-ROM
+ * drivers are eventually ported to the uniform CD-ROM driver interface.
+ */
+#define CDROMCLOSETRAY		0x5319	/* pendant of CDROMEJECT */
+#define CDROM_SET_OPTIONS	0x5320  /* Set behavior options */
+#define CDROM_CLEAR_OPTIONS	0x5321  /* Clear behavior options */
+#define CDROM_SELECT_SPEED	0x5322  /* Set the CD-ROM speed */
+#define CDROM_SELECT_DISC	0x5323  /* Select disc (for juke-boxes) */
+#define CDROM_MEDIA_CHANGED	0x5325  /* Check is media changed  */
+#define CDROM_DRIVE_STATUS	0x5326  /* Get tray position, etc. */
+#define CDROM_DISC_STATUS	0x5327  /* Get disc type, etc. */
+#define CDROM_CHANGER_NSLOTS    0x5328  /* Get number of slots */
+#define CDROM_LOCKDOOR		0x5329  /* lock or unlock door */
+#define CDROM_DEBUG		0x5330	/* Turn debug messages on/off */
+#define CDROM_GET_CAPABILITY	0x5331	/* get capabilities */
+
+/* Note that scsi/scsi_ioctl.h also uses 0x5382 - 0x5386.
+ * Future CDROM ioctls should be kept below 0x537F
+ */
+
+/* This ioctl is only used by sbpcd at the moment */
+#define CDROMAUDIOBUFSIZ        0x5382	/* set the audio buffer size */
+					/* conflict with SCSI_IOCTL_GET_IDLUN */
+
+/* DVD-ROM Specific ioctls */
+#define DVD_READ_STRUCT		0x5390  /* Read structure */
+#define DVD_WRITE_STRUCT	0x5391  /* Write structure */
+#define DVD_AUTH		0x5392  /* Authentication */
+
+#define CDROM_SEND_PACKET	0x5393	/* send a packet to the drive */
+#define CDROM_NEXT_WRITABLE	0x5394	/* get next writable block */
+#define CDROM_LAST_WRITTEN	0x5395	/* get last block written on disc */
+
+/*******************************************************
+ * CDROM IOCTL structures
+ *******************************************************/
+
+/* Address in MSF format */
+struct cdrom_msf0		
+{
+	__u8	minute;
+	__u8	second;
+	__u8	frame;
+};
+
+/* Address in either MSF or logical format */
+union cdrom_addr		
+{
+	struct cdrom_msf0	msf;
+	int			lba;
+};
+
+/* This struct is used by the CDROMPLAYMSF ioctl */ 
+struct cdrom_msf 
+{
+	__u8	cdmsf_min0;	/* start minute */
+	__u8	cdmsf_sec0;	/* start second */
+	__u8	cdmsf_frame0;	/* start frame */
+	__u8	cdmsf_min1;	/* end minute */
+	__u8	cdmsf_sec1;	/* end second */
+	__u8	cdmsf_frame1;	/* end frame */
+};
+
+/* This struct is used by the CDROMPLAYTRKIND ioctl */
+struct cdrom_ti 
+{
+	__u8	cdti_trk0;	/* start track */
+	__u8	cdti_ind0;	/* start index */
+	__u8	cdti_trk1;	/* end track */
+	__u8	cdti_ind1;	/* end index */
+};
+
+/* This struct is used by the CDROMREADTOCHDR ioctl */
+struct cdrom_tochdr 	
+{
+	__u8	cdth_trk0;	/* start track */
+	__u8	cdth_trk1;	/* end track */
+};
+
+/* This struct is used by the CDROMVOLCTRL and CDROMVOLREAD ioctls */
+struct cdrom_volctrl
+{
+	__u8	channel0;
+	__u8	channel1;
+	__u8	channel2;
+	__u8	channel3;
+};
+
+/* This struct is used by the CDROMSUBCHNL ioctl */
+struct cdrom_subchnl 
+{
+	__u8	cdsc_format;
+	__u8	cdsc_audiostatus;
+	__u8	cdsc_adr:	4;
+	__u8	cdsc_ctrl:	4;
+	__u8	cdsc_trk;
+	__u8	cdsc_ind;
+	union cdrom_addr cdsc_absaddr;
+	union cdrom_addr cdsc_reladdr;
+};
+
+
+/* This struct is used by the CDROMREADTOCENTRY ioctl */
+struct cdrom_tocentry 
+{
+	__u8	cdte_track;
+	__u8	cdte_adr	:4;
+	__u8	cdte_ctrl	:4;
+	__u8	cdte_format;
+	union cdrom_addr cdte_addr;
+	__u8	cdte_datamode;
+};
+
+/* This struct is used by the CDROMREADMODE1, and CDROMREADMODE2 ioctls */
+struct cdrom_read      
+{
+	int	cdread_lba;
+	char 	*cdread_bufaddr;
+	int	cdread_buflen;
+};
+
+/* This struct is used by the CDROMREADAUDIO ioctl */
+struct cdrom_read_audio
+{
+	union cdrom_addr addr; /* frame address */
+	__u8 addr_format;      /* CDROM_LBA or CDROM_MSF */
+	int nframes;           /* number of 2352-byte-frames to read at once */
+	__u8 __user *buf;      /* frame buffer (size: nframes*2352 bytes) */
+};
+
+/* This struct is used with the CDROMMULTISESSION ioctl */
+struct cdrom_multisession
+{
+	union cdrom_addr addr; /* frame address: start-of-last-session 
+	                           (not the new "frame 16"!).  Only valid
+	                           if the "xa_flag" is true. */
+	__u8 xa_flag;        /* 1: "is XA disk" */
+	__u8 addr_format;    /* CDROM_LBA or CDROM_MSF */
+};
+
+/* This struct is used with the CDROM_GET_MCN ioctl.  
+ * Very few audio discs actually have Universal Product Code information, 
+ * which should just be the Medium Catalog Number on the box.  Also note 
+ * that the way the codeis written on CD is _not_ uniform across all discs!
+ */  
+struct cdrom_mcn 
+{
+  __u8 medium_catalog_number[14]; /* 13 ASCII digits, null-terminated */
+};
+
+/* This is used by the CDROMPLAYBLK ioctl */
+struct cdrom_blk 
+{
+	unsigned from;
+	unsigned short len;
+};
+
+#define CDROM_PACKET_SIZE	12
+
+#define CGC_DATA_UNKNOWN	0
+#define CGC_DATA_WRITE		1
+#define CGC_DATA_READ		2
+#define CGC_DATA_NONE		3
+
+/* for CDROM_PACKET_COMMAND ioctl */
+struct cdrom_generic_command
+{
+	unsigned char 		cmd[CDROM_PACKET_SIZE];
+	unsigned char		__user *buffer;
+	unsigned int 		buflen;
+	int			stat;
+	struct request_sense	__user *sense;
+	unsigned char		data_direction;
+	int			quiet;
+	int			timeout;
+	void			__user *reserved[1];	/* unused, actually */
+};
+
+/*
+ * A CD-ROM physical sector size is 2048, 2052, 2056, 2324, 2332, 2336, 
+ * 2340, or 2352 bytes long.  
+
+*         Sector types of the standard CD-ROM data formats:
+ *
+ * format   sector type               user data size (bytes)
+ * -----------------------------------------------------------------------------
+ *   1     (Red Book)    CD-DA          2352    (CD_FRAMESIZE_RAW)
+ *   2     (Yellow Book) Mode1 Form1    2048    (CD_FRAMESIZE)
+ *   3     (Yellow Book) Mode1 Form2    2336    (CD_FRAMESIZE_RAW0)
+ *   4     (Green Book)  Mode2 Form1    2048    (CD_FRAMESIZE)
+ *   5     (Green Book)  Mode2 Form2    2328    (2324+4 spare bytes)
+ *
+ *
+ *       The layout of the standard CD-ROM data formats:
+ * -----------------------------------------------------------------------------
+ * - audio (red):                  | audio_sample_bytes |
+ *                                 |        2352        |
+ *
+ * - data (yellow, mode1):         | sync - head - data - EDC - zero - ECC |
+ *                                 |  12  -   4  - 2048 -  4  -   8  - 276 |
+ *
+ * - data (yellow, mode2):         | sync - head - data |
+ *                                 |  12  -   4  - 2336 |
+ *
+ * - XA data (green, mode2 form1): | sync - head - sub - data - EDC - ECC |
+ *                                 |  12  -   4  -  8  - 2048 -  4  - 276 |
+ *
+ * - XA data (green, mode2 form2): | sync - head - sub - data - Spare |
+ *                                 |  12  -   4  -  8  - 2324 -  4    |
+ *
+ */
+
+/* Some generally useful CD-ROM information -- mostly based on the above */
+#define CD_MINS              74 /* max. minutes per CD, not really a limit */
+#define CD_SECS              60 /* seconds per minute */
+#define CD_FRAMES            75 /* frames per second */
+#define CD_SYNC_SIZE         12 /* 12 sync bytes per raw data frame */
+#define CD_MSF_OFFSET       150 /* MSF numbering offset of first frame */
+#define CD_CHUNK_SIZE        24 /* lowest-level "data bytes piece" */
+#define CD_NUM_OF_CHUNKS     98 /* chunks per frame */
+#define CD_FRAMESIZE_SUB     96 /* subchannel data "frame" size */
+#define CD_HEAD_SIZE          4 /* header (address) bytes per raw data frame */
+#define CD_SUBHEAD_SIZE       8 /* subheader bytes per raw XA data frame */
+#define CD_EDC_SIZE           4 /* bytes EDC per most raw data frame types */
+#define CD_ZERO_SIZE          8 /* bytes zero per yellow book mode 1 frame */
+#define CD_ECC_SIZE         276 /* bytes ECC per most raw data frame types */
+#define CD_FRAMESIZE       2048 /* bytes per frame, "cooked" mode */
+#define CD_FRAMESIZE_RAW   2352 /* bytes per frame, "raw" mode */
+#define CD_FRAMESIZE_RAWER 2646 /* The maximum possible returned bytes */ 
+/* most drives don't deliver everything: */
+#define CD_FRAMESIZE_RAW1 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE) /*2340*/
+#define CD_FRAMESIZE_RAW0 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE-CD_HEAD_SIZE) /*2336*/
+
+#define CD_XA_HEAD        (CD_HEAD_SIZE+CD_SUBHEAD_SIZE) /* "before data" part of raw XA frame */
+#define CD_XA_TAIL        (CD_EDC_SIZE+CD_ECC_SIZE) /* "after data" part of raw XA frame */
+#define CD_XA_SYNC_HEAD   (CD_SYNC_SIZE+CD_XA_HEAD) /* sync bytes + header of XA frame */
+
+/* CD-ROM address types (cdrom_tocentry.cdte_format) */
+#define	CDROM_LBA 0x01 /* "logical block": first frame is #0 */
+#define	CDROM_MSF 0x02 /* "minute-second-frame": binary, not bcd here! */
+
+/* bit to tell whether track is data or audio (cdrom_tocentry.cdte_ctrl) */
+#define	CDROM_DATA_TRACK	0x04
+
+/* The leadout track is always 0xAA, regardless of # of tracks on disc */
+#define	CDROM_LEADOUT		0xAA
+
+/* audio states (from SCSI-2, but seen with other drives, too) */
+#define	CDROM_AUDIO_INVALID	0x00	/* audio status not supported */
+#define	CDROM_AUDIO_PLAY	0x11	/* audio play operation in progress */
+#define	CDROM_AUDIO_PAUSED	0x12	/* audio play operation paused */
+#define	CDROM_AUDIO_COMPLETED	0x13	/* audio play successfully completed */
+#define	CDROM_AUDIO_ERROR	0x14	/* audio play stopped due to error */
+#define	CDROM_AUDIO_NO_STATUS	0x15	/* no current audio status to return */
+
+/* capability flags used with the uniform CD-ROM driver */ 
+#define CDC_CLOSE_TRAY		0x1     /* caddy systems _can't_ close */
+#define CDC_OPEN_TRAY		0x2     /* but _can_ eject.  */
+#define CDC_LOCK		0x4     /* disable manual eject */
+#define CDC_SELECT_SPEED 	0x8     /* programmable speed */
+#define CDC_SELECT_DISC		0x10    /* select disc from juke-box */
+#define CDC_MULTI_SESSION 	0x20    /* read sessions>1 */
+#define CDC_MCN			0x40    /* Medium Catalog Number */
+#define CDC_MEDIA_CHANGED 	0x80    /* media changed */
+#define CDC_PLAY_AUDIO		0x100   /* audio functions */
+#define CDC_RESET               0x200   /* hard reset device */
+#define CDC_DRIVE_STATUS        0x800   /* driver implements drive status */
+#define CDC_GENERIC_PACKET	0x1000	/* driver implements generic packets */
+#define CDC_CD_R		0x2000	/* drive is a CD-R */
+#define CDC_CD_RW		0x4000	/* drive is a CD-RW */
+#define CDC_DVD			0x8000	/* drive is a DVD */
+#define CDC_DVD_R		0x10000	/* drive can write DVD-R */
+#define CDC_DVD_RAM		0x20000	/* drive can write DVD-RAM */
+#define CDC_MO_DRIVE		0x40000 /* drive is an MO device */
+#define CDC_MRW			0x80000 /* drive can read MRW */
+#define CDC_MRW_W		0x100000 /* drive can write MRW */
+#define CDC_RAM			0x200000 /* ok to open for WRITE */
+
+/* drive status possibilities returned by CDROM_DRIVE_STATUS ioctl */
+#define CDS_NO_INFO		0	/* if not implemented */
+#define CDS_NO_DISC		1
+#define CDS_TRAY_OPEN		2
+#define CDS_DRIVE_NOT_READY	3
+#define CDS_DISC_OK		4
+
+/* return values for the CDROM_DISC_STATUS ioctl */
+/* can also return CDS_NO_[INFO|DISC], from above */
+#define CDS_AUDIO		100
+#define CDS_DATA_1		101
+#define CDS_DATA_2		102
+#define CDS_XA_2_1		103
+#define CDS_XA_2_2		104
+#define CDS_MIXED		105
+
+/* User-configurable behavior options for the uniform CD-ROM driver */
+#define CDO_AUTO_CLOSE		0x1     /* close tray on first open() */
+#define CDO_AUTO_EJECT		0x2     /* open tray on last release() */
+#define CDO_USE_FFLAGS		0x4     /* use O_NONBLOCK information on open */
+#define CDO_LOCK		0x8     /* lock tray on open files */
+#define CDO_CHECK_TYPE		0x10    /* check type on open for data */
+
+/* Special codes used when specifying changer slots. */
+#define CDSL_NONE       	(INT_MAX-1)
+#define CDSL_CURRENT    	INT_MAX
+
+/* For partition based multisession access. IDE can handle 64 partitions
+ * per drive - SCSI CD-ROM's use minors to differentiate between the
+ * various drives, so we can't do multisessions the same way there.
+ * Use the -o session=x option to mount on them.
+ */
+#define CD_PART_MAX		64
+#define CD_PART_MASK		(CD_PART_MAX - 1)
+
+/*********************************************************************
+ * Generic Packet commands, MMC commands, and such
+ *********************************************************************/
+
+ /* The generic packet command opcodes for CD/DVD Logical Units,
+ * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
+#define GPCMD_BLANK			    0xa1
+#define GPCMD_CLOSE_TRACK		    0x5b
+#define GPCMD_FLUSH_CACHE		    0x35
+#define GPCMD_FORMAT_UNIT		    0x04
+#define GPCMD_GET_CONFIGURATION		    0x46
+#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
+#define GPCMD_GET_PERFORMANCE		    0xac
+#define GPCMD_INQUIRY			    0x12
+#define GPCMD_LOAD_UNLOAD		    0xa6
+#define GPCMD_MECHANISM_STATUS		    0xbd
+#define GPCMD_MODE_SELECT_10		    0x55
+#define GPCMD_MODE_SENSE_10		    0x5a
+#define GPCMD_PAUSE_RESUME		    0x4b
+#define GPCMD_PLAY_AUDIO_10		    0x45
+#define GPCMD_PLAY_AUDIO_MSF		    0x47
+#define GPCMD_PLAY_AUDIO_TI		    0x48
+#define GPCMD_PLAY_CD			    0xbc
+#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL  0x1e
+#define GPCMD_READ_10			    0x28
+#define GPCMD_READ_12			    0xa8
+#define GPCMD_READ_BUFFER		    0x3c
+#define GPCMD_READ_BUFFER_CAPACITY	    0x5c
+#define GPCMD_READ_CDVD_CAPACITY	    0x25
+#define GPCMD_READ_CD			    0xbe
+#define GPCMD_READ_CD_MSF		    0xb9
+#define GPCMD_READ_DISC_INFO		    0x51
+#define GPCMD_READ_DVD_STRUCTURE	    0xad
+#define GPCMD_READ_FORMAT_CAPACITIES	    0x23
+#define GPCMD_READ_HEADER		    0x44
+#define GPCMD_READ_TRACK_RZONE_INFO	    0x52
+#define GPCMD_READ_SUBCHANNEL		    0x42
+#define GPCMD_READ_TOC_PMA_ATIP		    0x43
+#define GPCMD_REPAIR_RZONE_TRACK	    0x58
+#define GPCMD_REPORT_KEY		    0xa4
+#define GPCMD_REQUEST_SENSE		    0x03
+#define GPCMD_RESERVE_RZONE_TRACK	    0x53
+#define GPCMD_SEND_CUE_SHEET		    0x5d
+#define GPCMD_SCAN			    0xba
+#define GPCMD_SEEK			    0x2b
+#define GPCMD_SEND_DVD_STRUCTURE	    0xbf
+#define GPCMD_SEND_EVENT		    0xa2
+#define GPCMD_SEND_KEY			    0xa3
+#define GPCMD_SEND_OPC			    0x54
+#define GPCMD_SET_READ_AHEAD		    0xa7
+#define GPCMD_SET_STREAMING		    0xb6
+#define GPCMD_START_STOP_UNIT		    0x1b
+#define GPCMD_STOP_PLAY_SCAN		    0x4e
+#define GPCMD_TEST_UNIT_READY		    0x00
+#define GPCMD_VERIFY_10			    0x2f
+#define GPCMD_WRITE_10			    0x2a
+#define GPCMD_WRITE_12			    0xaa
+#define GPCMD_WRITE_AND_VERIFY_10	    0x2e
+#define GPCMD_WRITE_BUFFER		    0x3b
+/* This is listed as optional in ATAPI 2.6, but is (curiously) 
+ * missing from Mt. Fuji, Table 57.  It _is_ mentioned in Mt. Fuji
+ * Table 377 as an MMC command for SCSi devices though...  Most ATAPI
+ * drives support it. */
+#define GPCMD_SET_SPEED			    0xbb
+/* This seems to be a SCSI specific CD-ROM opcode 
+ * to play data at track/index */
+#define GPCMD_PLAYAUDIO_TI		    0x48
+/*
+ * From MS Media Status Notification Support Specification. For
+ * older drives only.
+ */
+#define GPCMD_GET_MEDIA_STATUS		    0xda
+
+/* Mode page codes for mode sense/set */
+#define GPMODE_VENDOR_PAGE		0x00
+#define GPMODE_R_W_ERROR_PAGE		0x01
+#define GPMODE_WRITE_PARMS_PAGE		0x05
+#define GPMODE_WCACHING_PAGE		0x08
+#define GPMODE_AUDIO_CTL_PAGE		0x0e
+#define GPMODE_POWER_PAGE		0x1a
+#define GPMODE_FAULT_FAIL_PAGE		0x1c
+#define GPMODE_TO_PROTECT_PAGE		0x1d
+#define GPMODE_CAPABILITIES_PAGE	0x2a
+#define GPMODE_ALL_PAGES		0x3f
+/* Not in Mt. Fuji, but in ATAPI 2.6 -- deprecated now in favor
+ * of MODE_SENSE_POWER_PAGE */
+#define GPMODE_CDROM_PAGE		0x0d
+
+
+
+/* DVD struct types */
+#define DVD_STRUCT_PHYSICAL	0x00
+#define DVD_STRUCT_COPYRIGHT	0x01
+#define DVD_STRUCT_DISCKEY	0x02
+#define DVD_STRUCT_BCA		0x03
+#define DVD_STRUCT_MANUFACT	0x04
+
+struct dvd_layer {
+	__u8 book_version	: 4;
+	__u8 book_type		: 4;
+	__u8 min_rate		: 4;
+	__u8 disc_size		: 4;
+	__u8 layer_type		: 4;
+	__u8 track_path		: 1;
+	__u8 nlayers		: 2;
+	__u8 track_density	: 4;
+	__u8 linear_density	: 4;
+	__u8 bca		: 1;
+	__u32 start_sector;
+	__u32 end_sector;
+	__u32 end_sector_l0;
+};
+
+#define DVD_LAYERS	4
+
+struct dvd_physical {
+	__u8 type;
+	__u8 layer_num;
+	struct dvd_layer layer[DVD_LAYERS];
+};
+
+struct dvd_copyright {
+	__u8 type;
+
+	__u8 layer_num;
+	__u8 cpst;
+	__u8 rmi;
+};
+
+struct dvd_disckey {
+	__u8 type;
+
+	unsigned agid		: 2;
+	__u8 value[2048];
+};
+
+struct dvd_bca {
+	__u8 type;
+
+	int len;
+	__u8 value[188];
+};
+
+struct dvd_manufact {
+	__u8 type;
+
+	__u8 layer_num;
+	int len;
+	__u8 value[2048];
+};
+
+typedef union {
+	__u8 type;
+
+	struct dvd_physical	physical;
+	struct dvd_copyright	copyright;
+	struct dvd_disckey	disckey;
+	struct dvd_bca		bca;
+	struct dvd_manufact	manufact;
+} dvd_struct;
+
+/*
+ * DVD authentication ioctl
+ */
+
+/* Authentication states */
+#define DVD_LU_SEND_AGID	0
+#define DVD_HOST_SEND_CHALLENGE	1
+#define DVD_LU_SEND_KEY1	2
+#define DVD_LU_SEND_CHALLENGE	3
+#define DVD_HOST_SEND_KEY2	4
+
+/* Termination states */
+#define DVD_AUTH_ESTABLISHED	5
+#define DVD_AUTH_FAILURE	6
+
+/* Other functions */
+#define DVD_LU_SEND_TITLE_KEY	7
+#define DVD_LU_SEND_ASF		8
+#define DVD_INVALIDATE_AGID	9
+#define DVD_LU_SEND_RPC_STATE	10
+#define DVD_HOST_SEND_RPC_STATE	11
+
+/* State data */
+typedef __u8 dvd_key[5];		/* 40-bit value, MSB is first elem. */
+typedef __u8 dvd_challenge[10];	/* 80-bit value, MSB is first elem. */
+
+struct dvd_lu_send_agid {
+	__u8 type;
+	unsigned agid		: 2;
+};
+
+struct dvd_host_send_challenge {
+	__u8 type;
+	unsigned agid		: 2;
+
+	dvd_challenge chal;
+};
+
+struct dvd_send_key {
+	__u8 type;
+	unsigned agid		: 2;
+
+	dvd_key key;
+};
+
+struct dvd_lu_send_challenge {
+	__u8 type;
+	unsigned agid		: 2;
+
+	dvd_challenge chal;
+};
+
+#define DVD_CPM_NO_COPYRIGHT	0
+#define DVD_CPM_COPYRIGHTED	1
+
+#define DVD_CP_SEC_NONE		0
+#define DVD_CP_SEC_EXIST	1
+
+#define DVD_CGMS_UNRESTRICTED	0
+#define DVD_CGMS_SINGLE		2
+#define DVD_CGMS_RESTRICTED	3
+
+struct dvd_lu_send_title_key {
+	__u8 type;
+	unsigned agid		: 2;
+
+	dvd_key title_key;
+	int lba;
+	unsigned cpm		: 1;
+	unsigned cp_sec		: 1;
+	unsigned cgms		: 2;
+};
+
+struct dvd_lu_send_asf {
+	__u8 type;
+	unsigned agid		: 2;
+
+	unsigned asf		: 1;
+};
+
+struct dvd_host_send_rpcstate {
+	__u8 type;
+	__u8 pdrc;
+};
+
+struct dvd_lu_send_rpcstate {
+	__u8 type		: 2;
+	__u8 vra		: 3;
+	__u8 ucca		: 3;
+	__u8 region_mask;
+	__u8 rpc_scheme;
+};
+
+typedef union {
+	__u8 type;
+
+	struct dvd_lu_send_agid		lsa;
+	struct dvd_host_send_challenge	hsc;
+	struct dvd_send_key		lsk;
+	struct dvd_lu_send_challenge	lsc;
+	struct dvd_send_key		hsk;
+	struct dvd_lu_send_title_key	lstk;
+	struct dvd_lu_send_asf		lsasf;
+	struct dvd_host_send_rpcstate	hrpcs;
+	struct dvd_lu_send_rpcstate	lrpcs;
+} dvd_authinfo;
+
+struct request_sense {
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 valid		: 1;
+	__u8 error_code		: 7;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 error_code		: 7;
+	__u8 valid		: 1;
+#endif
+	__u8 segment_number;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved1		: 2;
+	__u8 ili		: 1;
+	__u8 reserved2		: 1;
+	__u8 sense_key		: 4;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 sense_key		: 4;
+	__u8 reserved2		: 1;
+	__u8 ili		: 1;
+	__u8 reserved1		: 2;
+#endif
+	__u8 information[4];
+	__u8 add_sense_len;
+	__u8 command_info[4];
+	__u8 asc;
+	__u8 ascq;
+	__u8 fruc;
+	__u8 sks[3];
+	__u8 asb[46];
+};
+
+/*
+ * feature profile
+ */
+#define CDF_RWRT	0x0020	/* "Random Writable" */
+#define CDF_HWDM	0x0024	/* "Hardware Defect Management" */
+#define CDF_MRW 	0x0028
+
+/*
+ * media status bits
+ */
+#define CDM_MRW_NOTMRW			0
+#define CDM_MRW_BGFORMAT_INACTIVE	1
+#define CDM_MRW_BGFORMAT_ACTIVE		2
+#define CDM_MRW_BGFORMAT_COMPLETE	3
+
+/*
+ * mrw address spaces
+ */
+#define MRW_LBA_DMA			0
+#define MRW_LBA_GAA			1
+
+/*
+ * mrw mode pages (first is deprecated) -- probed at init time and
+ * cdi->mrw_mode_page is set
+ */
+#define MRW_MODE_PC_PRE1		0x2c
+#define MRW_MODE_PC			0x03
+
+struct mrw_feature_desc {
+	__be16 feature_code;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved1		: 2;
+	__u8 feature_version	: 4;
+	__u8 persistent		: 1;
+	__u8 curr		: 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 curr		: 1;
+	__u8 persistent		: 1;
+	__u8 feature_version	: 4;
+	__u8 reserved1		: 2;
+#endif
+	__u8 add_len;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved2		: 7;
+	__u8 write		: 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 write		: 1;
+	__u8 reserved2		: 7;
+#endif
+	__u8 reserved3;
+	__u8 reserved4;
+	__u8 reserved5;
+};
+
+/* cf. mmc4r02g.pdf 5.3.10 Random Writable Feature (0020h) pg 197 of 635 */
+struct rwrt_feature_desc {
+	__be16 feature_code;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved1		: 2;
+	__u8 feature_version	: 4;
+	__u8 persistent		: 1;
+	__u8 curr		: 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 curr		: 1;
+	__u8 persistent		: 1;
+	__u8 feature_version	: 4;
+	__u8 reserved1		: 2;
+#endif
+	__u8 add_len;
+	__u32 last_lba;
+	__u32 block_size;
+	__u16 blocking;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved2		: 7;
+	__u8 page_present	: 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 page_present	: 1;
+	__u8 reserved2		: 7;
+#endif
+	__u8 reserved3;
+};
+
+typedef struct {
+	__be16 disc_information_length;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved1			: 3;
+        __u8 erasable			: 1;
+        __u8 border_status		: 2;
+        __u8 disc_status		: 2;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+        __u8 disc_status		: 2;
+        __u8 border_status		: 2;
+        __u8 erasable			: 1;
+	__u8 reserved1			: 3;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+	__u8 n_first_track;
+	__u8 n_sessions_lsb;
+	__u8 first_track_lsb;
+	__u8 last_track_lsb;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 did_v			: 1;
+        __u8 dbc_v			: 1;
+        __u8 uru			: 1;
+        __u8 reserved2			: 2;
+	__u8 dbit			: 1;
+	__u8 mrw_status			: 2;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 mrw_status			: 2;
+	__u8 dbit			: 1;
+        __u8 reserved2			: 2;
+        __u8 uru			: 1;
+        __u8 dbc_v			: 1;
+	__u8 did_v			: 1;
+#endif
+	__u8 disc_type;
+	__u8 n_sessions_msb;
+	__u8 first_track_msb;
+	__u8 last_track_msb;
+	__u32 disc_id;
+	__u32 lead_in;
+	__u32 lead_out;
+	__u8 disc_bar_code[8];
+	__u8 reserved3;
+	__u8 n_opc;
+} disc_information;
+
+typedef struct {
+	__be16 track_information_length;
+	__u8 track_lsb;
+	__u8 session_lsb;
+	__u8 reserved1;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved2			: 2;
+        __u8 damage			: 1;
+        __u8 copy			: 1;
+        __u8 track_mode			: 4;
+	__u8 rt				: 1;
+	__u8 blank			: 1;
+	__u8 packet			: 1;
+	__u8 fp				: 1;
+	__u8 data_mode			: 4;
+	__u8 reserved3			: 6;
+	__u8 lra_v			: 1;
+	__u8 nwa_v			: 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+        __u8 track_mode			: 4;
+        __u8 copy			: 1;
+        __u8 damage			: 1;
+	__u8 reserved2			: 2;
+	__u8 data_mode			: 4;
+	__u8 fp				: 1;
+	__u8 packet			: 1;
+	__u8 blank			: 1;
+	__u8 rt				: 1;
+	__u8 nwa_v			: 1;
+	__u8 lra_v			: 1;
+	__u8 reserved3			: 6;
+#endif
+	__be32 track_start;
+	__be32 next_writable;
+	__be32 free_blocks;
+	__be32 fixed_packet_size;
+	__be32 track_size;
+	__be32 last_rec_address;
+} track_information;
+
+struct feature_header {
+	__u32 data_len;
+	__u8 reserved1;
+	__u8 reserved2;
+	__u16 curr_profile;
+};
+
+struct mode_page_header {
+	__be16 mode_data_length;
+	__u8 medium_type;
+	__u8 reserved1;
+	__u8 reserved2;
+	__u8 reserved3;
+	__be16 desc_length;
+};
+
+#ifdef __KERNEL__
+#include <linux/fs.h>		/* not really needed, later.. */
+#include <linux/list.h>
+
+struct packet_command
+{
+	unsigned char 		cmd[CDROM_PACKET_SIZE];
+	unsigned char 		*buffer;
+	unsigned int 		buflen;
+	int			stat;
+	struct request_sense	*sense;
+	unsigned char		data_direction;
+	int			quiet;
+	int			timeout;
+	void			*reserved[1];
+};
+
+/*
+ * _OLD will use PIO transfer on atapi devices, _BPC_* will use DMA
+ */
+#define CDDA_OLD		0	/* old style */
+#define CDDA_BPC_SINGLE		1	/* single frame block pc */
+#define CDDA_BPC_FULL		2	/* multi frame block pc */
+
+/* Uniform cdrom data structures for cdrom.c */
+struct cdrom_device_info {
+	struct cdrom_device_ops  *ops;  /* link to device_ops */
+	struct list_head list;		/* linked list of all device_info */
+	struct gendisk *disk;		/* matching block layer disk */
+	void *handle;		        /* driver-dependent data */
+/* specifications */
+	int mask;                       /* mask of capability: disables them */
+	int speed;			/* maximum speed for reading data */
+	int capacity;			/* number of discs in jukebox */
+/* device-related storage */
+	unsigned int options	: 30;	/* options flags */
+	unsigned mc_flags	: 2;	/* media change buffer flags */
+	unsigned int vfs_events;	/* cached events for vfs path */
+	unsigned int ioctl_events;	/* cached events for ioctl path */
+    	int use_count;                  /* number of times device opened */
+    	char name[20];                  /* name of the device type */
+/* per-device flags */
+        __u8 sanyo_slot		: 2;	/* Sanyo 3 CD changer support */
+        __u8 keeplocked		: 1;	/* CDROM_LOCKDOOR status */
+        __u8 reserved		: 5;	/* not used yet */
+	int cdda_method;		/* see flags */
+	__u8 last_sense;
+	__u8 media_written;		/* dirty flag, DVD+RW bookkeeping */
+	unsigned short mmc3_profile;	/* current MMC3 profile */
+	int for_data;
+	int (*exit)(struct cdrom_device_info *);
+	int mrw_mode_page;
+};
+
+struct cdrom_device_ops {
+/* routines */
+	int (*open) (struct cdrom_device_info *, int);
+	void (*release) (struct cdrom_device_info *);
+	int (*drive_status) (struct cdrom_device_info *, int);
+	unsigned int (*check_events) (struct cdrom_device_info *cdi,
+				      unsigned int clearing, int slot);
+	int (*media_changed) (struct cdrom_device_info *, int);
+	int (*tray_move) (struct cdrom_device_info *, int);
+	int (*lock_door) (struct cdrom_device_info *, int);
+	int (*select_speed) (struct cdrom_device_info *, int);
+	int (*select_disc) (struct cdrom_device_info *, int);
+	int (*get_last_session) (struct cdrom_device_info *,
+				 struct cdrom_multisession *);
+	int (*get_mcn) (struct cdrom_device_info *,
+			struct cdrom_mcn *);
+	/* hard reset device */
+	int (*reset) (struct cdrom_device_info *);
+	/* play stuff */
+	int (*audio_ioctl) (struct cdrom_device_info *,unsigned int, void *);
+
+/* driver specifications */
+	const int capability;   /* capability flags */
+	int n_minors;           /* number of active minor devices */
+	/* handle uniform packets for scsi type devices (scsi,atapi) */
+	int (*generic_packet) (struct cdrom_device_info *,
+			       struct packet_command *);
+};
+
+/* the general block_device operations structure: */
+extern int cdrom_open(struct cdrom_device_info *cdi, struct block_device *bdev,
+			fmode_t mode);
+extern void cdrom_release(struct cdrom_device_info *cdi, fmode_t mode);
+extern int cdrom_ioctl(struct cdrom_device_info *cdi, struct block_device *bdev,
+		       fmode_t mode, unsigned int cmd, unsigned long arg);
+extern unsigned int cdrom_check_events(struct cdrom_device_info *cdi,
+				       unsigned int clearing);
+extern int cdrom_media_changed(struct cdrom_device_info *);
+
+extern int register_cdrom(struct cdrom_device_info *cdi);
+extern void unregister_cdrom(struct cdrom_device_info *cdi);
+
+typedef struct {
+    int data;
+    int audio;
+    int cdi;
+    int xa;
+    long error;
+} tracktype;
+
+extern int cdrom_get_last_written(struct cdrom_device_info *cdi, long *last_written);
+extern int cdrom_number_of_slots(struct cdrom_device_info *cdi);
+extern int cdrom_mode_select(struct cdrom_device_info *cdi,
+			     struct packet_command *cgc);
+extern int cdrom_mode_sense(struct cdrom_device_info *cdi,
+			    struct packet_command *cgc,
+			    int page_code, int page_control);
+extern void init_cdrom_command(struct packet_command *cgc,
+			       void *buffer, int len, int type);
+
+/* The SCSI spec says there could be 256 slots. */
+#define CDROM_MAX_SLOTS	256
+
+struct cdrom_mechstat_header {
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 fault         : 1;
+	__u8 changer_state : 2;
+	__u8 curslot       : 5;
+	__u8 mech_state    : 3;
+	__u8 door_open     : 1;
+	__u8 reserved1     : 4;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 curslot       : 5;
+	__u8 changer_state : 2;
+	__u8 fault         : 1;
+	__u8 reserved1     : 4;
+	__u8 door_open     : 1;
+	__u8 mech_state    : 3;
+#endif
+	__u8     curlba[3];
+	__u8     nslots;
+	__u16 slot_tablelen;
+};
+
+struct cdrom_slot {
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 disc_present : 1;
+	__u8 reserved1    : 6;
+	__u8 change       : 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 change       : 1;
+	__u8 reserved1    : 6;
+	__u8 disc_present : 1;
+#endif
+	__u8 reserved2[3];
+};
+
+struct cdrom_changer_info {
+	struct cdrom_mechstat_header hdr;
+	struct cdrom_slot slots[CDROM_MAX_SLOTS];
+};
+
+typedef enum {
+	mechtype_caddy = 0,
+	mechtype_tray  = 1,
+	mechtype_popup = 2,
+	mechtype_individual_changer = 4,
+	mechtype_cartridge_changer  = 5
+} mechtype_t;
+
+typedef struct {
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 ps			: 1;
+	__u8 reserved1		: 1;
+	__u8 page_code		: 6;
+        __u8 page_length;
+	__u8 reserved2		: 1;
+	__u8 bufe		: 1;
+	__u8 ls_v		: 1;
+	__u8 test_write		: 1;
+        __u8 write_type		: 4;
+	__u8 multi_session	: 2; /* or border, DVD */
+	__u8 fp			: 1;
+	__u8 copy		: 1;
+	__u8 track_mode		: 4;
+	__u8 reserved3		: 4;
+	__u8 data_block_type	: 4;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 page_code		: 6;
+	__u8 reserved1		: 1;
+	__u8 ps			: 1;
+        __u8 page_length;
+        __u8 write_type		: 4;
+	__u8 test_write		: 1;
+	__u8 ls_v		: 1;
+	__u8 bufe		: 1;
+	__u8 reserved2		: 1;
+	__u8 track_mode		: 4;
+	__u8 copy		: 1;
+	__u8 fp			: 1;
+	__u8 multi_session	: 2; /* or border, DVD */
+	__u8 data_block_type	: 4;
+	__u8 reserved3		: 4;
+#endif
+	__u8 link_size;
+	__u8 reserved4;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved5		: 2;
+	__u8 app_code		: 6;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 app_code		: 6;
+	__u8 reserved5		: 2;
+#endif
+	__u8 session_format;
+	__u8 reserved6;
+	__be32 packet_size;
+	__u16 audio_pause;
+	__u8 mcn[16];
+	__u8 isrc[16];
+	__u8 subhdr0;
+	__u8 subhdr1;
+	__u8 subhdr2;
+	__u8 subhdr3;
+} __attribute__((packed)) write_param_page;
+
+struct modesel_head
+{
+	__u8	reserved1;
+	__u8	medium;
+	__u8	reserved2;
+	__u8	block_desc_length;
+	__u8	density;
+	__u8	number_of_blocks_hi;
+	__u8	number_of_blocks_med;
+	__u8	number_of_blocks_lo;
+	__u8	reserved3;
+	__u8	block_length_hi;
+	__u8	block_length_med;
+	__u8	block_length_lo;
+};
+
+typedef struct {
+	__u16 report_key_length;
+	__u8 reserved1;
+	__u8 reserved2;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 type_code			: 2;
+	__u8 vra			: 3;
+	__u8 ucca			: 3;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 ucca			: 3;
+	__u8 vra			: 3;
+	__u8 type_code			: 2;
+#endif
+	__u8 region_mask;
+	__u8 rpc_scheme;
+	__u8 reserved3;
+} rpc_state_t;
+
+struct event_header {
+	__be16 data_len;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 nea		: 1;
+	__u8 reserved1		: 4;
+	__u8 notification_class	: 3;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 notification_class	: 3;
+	__u8 reserved1		: 4;
+	__u8 nea		: 1;
+#endif
+	__u8 supp_event_class;
+};
+
+struct media_event_desc {
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved1		: 4;
+	__u8 media_event_code	: 4;
+	__u8 reserved2		: 6;
+	__u8 media_present	: 1;
+	__u8 door_open		: 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 media_event_code	: 4;
+	__u8 reserved1		: 4;
+	__u8 door_open		: 1;
+	__u8 media_present	: 1;
+	__u8 reserved2		: 6;
+#endif
+	__u8 start_slot;
+	__u8 end_slot;
+};
+
+extern int cdrom_get_media_event(struct cdrom_device_info *cdi, struct media_event_desc *med);
+
+static inline void lba_to_msf(int lba, u8 *m, u8 *s, u8 *f)
+{
+	lba += CD_MSF_OFFSET;
+	lba &= 0xffffff;  /* negative lbas use only 24 bits */
+	*m = lba / (CD_SECS * CD_FRAMES);
+	lba %= (CD_SECS * CD_FRAMES);
+	*s = lba / CD_FRAMES;
+	*f = lba % CD_FRAMES;
+}
+
+static inline int msf_to_lba(u8 m, u8 s, u8 f)
+{
+	return (((m * CD_SECS) + s) * CD_FRAMES + f) - CD_MSF_OFFSET;
+}
+#endif  /* End of kernel only stuff */ 
+
+#endif  /* _LINUX_CDROM_H */
diff --git a/include/linux/ceph/auth.h b/include/linux/ceph/auth.h
new file mode 100644
index 00000000..aa13392a
--- /dev/null
+++ b/include/linux/ceph/auth.h
@@ -0,0 +1,92 @@
+#ifndef _FS_CEPH_AUTH_H
+#define _FS_CEPH_AUTH_H
+
+#include <linux/ceph/types.h>
+#include <linux/ceph/buffer.h>
+
+/*
+ * Abstract interface for communicating with the authenticate module.
+ * There is some handshake that takes place between us and the monitor
+ * to acquire the necessary keys.  These are used to generate an
+ * 'authorizer' that we use when connecting to a service (mds, osd).
+ */
+
+struct ceph_auth_client;
+struct ceph_authorizer;
+
+struct ceph_auth_client_ops {
+	const char *name;
+
+	/*
+	 * true if we are authenticated and can connect to
+	 * services.
+	 */
+	int (*is_authenticated)(struct ceph_auth_client *ac);
+
+	/*
+	 * true if we should (re)authenticate, e.g., when our tickets
+	 * are getting old and crusty.
+	 */
+	int (*should_authenticate)(struct ceph_auth_client *ac);
+
+	/*
+	 * build requests and process replies during monitor
+	 * handshake.  if handle_reply returns -EAGAIN, we build
+	 * another request.
+	 */
+	int (*build_request)(struct ceph_auth_client *ac, void *buf, void *end);
+	int (*handle_reply)(struct ceph_auth_client *ac, int result,
+			    void *buf, void *end);
+
+	/*
+	 * Create authorizer for connecting to a service, and verify
+	 * the response to authenticate the service.
+	 */
+	int (*create_authorizer)(struct ceph_auth_client *ac, int peer_type,
+				 struct ceph_authorizer **a,
+				 void **buf, size_t *len,
+				 void **reply_buf, size_t *reply_len);
+	int (*verify_authorizer_reply)(struct ceph_auth_client *ac,
+				       struct ceph_authorizer *a, size_t len);
+	void (*destroy_authorizer)(struct ceph_auth_client *ac,
+				   struct ceph_authorizer *a);
+	void (*invalidate_authorizer)(struct ceph_auth_client *ac,
+				      int peer_type);
+
+	/* reset when we (re)connect to a monitor */
+	void (*reset)(struct ceph_auth_client *ac);
+
+	void (*destroy)(struct ceph_auth_client *ac);
+};
+
+struct ceph_auth_client {
+	u32 protocol;           /* CEPH_AUTH_* */
+	void *private;          /* for use by protocol implementation */
+	const struct ceph_auth_client_ops *ops;  /* null iff protocol==0 */
+
+	bool negotiating;       /* true if negotiating protocol */
+	const char *name;       /* entity name */
+	u64 global_id;          /* our unique id in system */
+	const struct ceph_crypto_key *key;     /* our secret key */
+	unsigned want_keys;     /* which services we want */
+};
+
+extern struct ceph_auth_client *ceph_auth_init(const char *name,
+					       const struct ceph_crypto_key *key);
+extern void ceph_auth_destroy(struct ceph_auth_client *ac);
+
+extern void ceph_auth_reset(struct ceph_auth_client *ac);
+
+extern int ceph_auth_build_hello(struct ceph_auth_client *ac,
+				 void *buf, size_t len);
+extern int ceph_handle_auth_reply(struct ceph_auth_client *ac,
+				  void *buf, size_t len,
+				  void *reply_buf, size_t reply_len);
+extern int ceph_entity_name_encode(const char *name, void **p, void *end);
+
+extern int ceph_build_auth(struct ceph_auth_client *ac,
+		    void *msg_buf, size_t msg_len);
+
+extern int ceph_auth_is_authenticated(struct ceph_auth_client *ac);
+
+#endif
diff --git a/include/linux/ceph/buffer.h b/include/linux/ceph/buffer.h
new file mode 100644
index 00000000..58d19014
--- /dev/null
+++ b/include/linux/ceph/buffer.h
@@ -0,0 +1,39 @@
+#ifndef __FS_CEPH_BUFFER_H
+#define __FS_CEPH_BUFFER_H
+
+#include <linux/kref.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/types.h>
+#include <linux/uio.h>
+
+/*
+ * a simple reference counted buffer.
+ *
+ * use kmalloc for small sizes (<= one page), vmalloc for larger
+ * sizes.
+ */
+struct ceph_buffer {
+	struct kref kref;
+	struct kvec vec;
+	size_t alloc_len;
+	bool is_vmalloc;
+};
+
+extern struct ceph_buffer *ceph_buffer_new(size_t len, gfp_t gfp);
+extern void ceph_buffer_release(struct kref *kref);
+
+static inline struct ceph_buffer *ceph_buffer_get(struct ceph_buffer *b)
+{
+	kref_get(&b->kref);
+	return b;
+}
+
+static inline void ceph_buffer_put(struct ceph_buffer *b)
+{
+	kref_put(&b->kref, ceph_buffer_release);
+}
+
+extern int ceph_decode_buffer(struct ceph_buffer **b, void **p, void *end);
+
+#endif
diff --git a/include/linux/ceph/ceph_debug.h b/include/linux/ceph/ceph_debug.h
new file mode 100644
index 00000000..aa2e1918
--- /dev/null
+++ b/include/linux/ceph/ceph_debug.h
@@ -0,0 +1,38 @@
+#ifndef _FS_CEPH_DEBUG_H
+#define _FS_CEPH_DEBUG_H
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#ifdef CONFIG_CEPH_LIB_PRETTYDEBUG
+
+/*
+ * wrap pr_debug to include a filename:lineno prefix on each line.
+ * this incurs some overhead (kernel size and execution time) due to
+ * the extra function call at each call site.
+ */
+
+# if defined(DEBUG) || defined(CONFIG_DYNAMIC_DEBUG)
+extern const char *ceph_file_part(const char *s, int len);
+#  define dout(fmt, ...)						\
+	pr_debug("%.*s %12.12s:%-4d : " fmt,				\
+		 8 - (int)sizeof(KBUILD_MODNAME), "    ",		\
+		 ceph_file_part(__FILE__, sizeof(__FILE__)),		\
+		 __LINE__, ##__VA_ARGS__)
+# else
+/* faux printk call just to see any compiler warnings. */
+#  define dout(fmt, ...)	do {				\
+		if (0)						\
+			printk(KERN_DEBUG fmt, ##__VA_ARGS__);	\
+	} while (0)
+# endif
+
+#else
+
+/*
+ * or, just wrap pr_debug
+ */
+# define dout(fmt, ...)	pr_debug(" " fmt, ##__VA_ARGS__)
+
+#endif
+
+#endif
diff --git a/include/linux/ceph/ceph_frag.h b/include/linux/ceph/ceph_frag.h
new file mode 100644
index 00000000..5babb8e9
--- /dev/null
+++ b/include/linux/ceph/ceph_frag.h
@@ -0,0 +1,109 @@
+#ifndef FS_CEPH_FRAG_H
+#define FS_CEPH_FRAG_H
+
+/*
+ * "Frags" are a way to describe a subset of a 32-bit number space,
+ * using a mask and a value to match against that mask.  Any given frag
+ * (subset of the number space) can be partitioned into 2^n sub-frags.
+ *
+ * Frags are encoded into a 32-bit word:
+ *   8 upper bits = "bits"
+ *  24 lower bits = "value"
+ * (We could go to 5+27 bits, but who cares.)
+ *
+ * We use the _most_ significant bits of the 24 bit value.  This makes
+ * values logically sort.
+ *
+ * Unfortunately, because the "bits" field is still in the high bits, we
+ * can't sort encoded frags numerically.  However, it does allow you
+ * to feed encoded frags as values into frag_contains_value.
+ */
+static inline __u32 ceph_frag_make(__u32 b, __u32 v)
+{
+	return (b << 24) |
+		(v & (0xffffffu << (24-b)) & 0xffffffu);
+}
+static inline __u32 ceph_frag_bits(__u32 f)
+{
+	return f >> 24;
+}
+static inline __u32 ceph_frag_value(__u32 f)
+{
+	return f & 0xffffffu;
+}
+static inline __u32 ceph_frag_mask(__u32 f)
+{
+	return (0xffffffu << (24-ceph_frag_bits(f))) & 0xffffffu;
+}
+static inline __u32 ceph_frag_mask_shift(__u32 f)
+{
+	return 24 - ceph_frag_bits(f);
+}
+
+static inline int ceph_frag_contains_value(__u32 f, __u32 v)
+{
+	return (v & ceph_frag_mask(f)) == ceph_frag_value(f);
+}
+static inline int ceph_frag_contains_frag(__u32 f, __u32 sub)
+{
+	/* is sub as specific as us, and contained by us? */
+	return ceph_frag_bits(sub) >= ceph_frag_bits(f) &&
+	       (ceph_frag_value(sub) & ceph_frag_mask(f)) == ceph_frag_value(f);
+}
+
+static inline __u32 ceph_frag_parent(__u32 f)
+{
+	return ceph_frag_make(ceph_frag_bits(f) - 1,
+			 ceph_frag_value(f) & (ceph_frag_mask(f) << 1));
+}
+static inline int ceph_frag_is_left_child(__u32 f)
+{
+	return ceph_frag_bits(f) > 0 &&
+		(ceph_frag_value(f) & (0x1000000 >> ceph_frag_bits(f))) == 0;
+}
+static inline int ceph_frag_is_right_child(__u32 f)
+{
+	return ceph_frag_bits(f) > 0 &&
+		(ceph_frag_value(f) & (0x1000000 >> ceph_frag_bits(f))) == 1;
+}
+static inline __u32 ceph_frag_sibling(__u32 f)
+{
+	return ceph_frag_make(ceph_frag_bits(f),
+		      ceph_frag_value(f) ^ (0x1000000 >> ceph_frag_bits(f)));
+}
+static inline __u32 ceph_frag_left_child(__u32 f)
+{
+	return ceph_frag_make(ceph_frag_bits(f)+1, ceph_frag_value(f));
+}
+static inline __u32 ceph_frag_right_child(__u32 f)
+{
+	return ceph_frag_make(ceph_frag_bits(f)+1,
+	      ceph_frag_value(f) | (0x1000000 >> (1+ceph_frag_bits(f))));
+}
+static inline __u32 ceph_frag_make_child(__u32 f, int by, int i)
+{
+	int newbits = ceph_frag_bits(f) + by;
+	return ceph_frag_make(newbits,
+			 ceph_frag_value(f) | (i << (24 - newbits)));
+}
+static inline int ceph_frag_is_leftmost(__u32 f)
+{
+	return ceph_frag_value(f) == 0;
+}
+static inline int ceph_frag_is_rightmost(__u32 f)
+{
+	return ceph_frag_value(f) == ceph_frag_mask(f);
+}
+static inline __u32 ceph_frag_next(__u32 f)
+{
+	return ceph_frag_make(ceph_frag_bits(f),
+			 ceph_frag_value(f) + (0x1000000 >> ceph_frag_bits(f)));
+}
+
+/*
+ * comparator to sort frags logically, as when traversing the
+ * number space in ascending order...
+ */
+int ceph_frag_compare(__u32 a, __u32 b);
+
+#endif
diff --git a/include/linux/ceph/ceph_fs.h b/include/linux/ceph/ceph_fs.h
new file mode 100644
index 00000000..b8c60694
--- /dev/null
+++ b/include/linux/ceph/ceph_fs.h
@@ -0,0 +1,751 @@
+/*
+ * ceph_fs.h - Ceph constants and data types to share between kernel and
+ * user space.
+ *
+ * Most types in this file are defined as little-endian, and are
+ * primarily intended to describe data structures that pass over the
+ * wire or that are stored on disk.
+ *
+ * LGPL2
+ */
+
+#ifndef CEPH_FS_H
+#define CEPH_FS_H
+
+#include "msgr.h"
+#include "rados.h"
+
+/*
+ * subprotocol versions.  when specific messages types or high-level
+ * protocols change, bump the affected components.  we keep rev
+ * internal cluster protocols separately from the public,
+ * client-facing protocol.
+ */
+#define CEPH_OSD_PROTOCOL     8 /* cluster internal */
+#define CEPH_MDS_PROTOCOL    12 /* cluster internal */
+#define CEPH_MON_PROTOCOL     5 /* cluster internal */
+#define CEPH_OSDC_PROTOCOL   24 /* server/client */
+#define CEPH_MDSC_PROTOCOL   32 /* server/client */
+#define CEPH_MONC_PROTOCOL   15 /* server/client */
+
+
+#define CEPH_INO_ROOT  1
+#define CEPH_INO_CEPH  2        /* hidden .ceph dir */
+
+/* arbitrary limit on max # of monitors (cluster of 3 is typical) */
+#define CEPH_MAX_MON   31
+
+
+/*
+ * feature bits
+ */
+#define CEPH_FEATURE_UID            (1<<0)
+#define CEPH_FEATURE_NOSRCADDR      (1<<1)
+#define CEPH_FEATURE_MONCLOCKCHECK  (1<<2)
+#define CEPH_FEATURE_FLOCK          (1<<3)
+#define CEPH_FEATURE_SUBSCRIBE2     (1<<4)
+#define CEPH_FEATURE_MONNAMES       (1<<5)
+#define CEPH_FEATURE_RECONNECT_SEQ  (1<<6)
+#define CEPH_FEATURE_DIRLAYOUTHASH  (1<<7)
+
+
+/*
+ * ceph_file_layout - describe data layout for a file/inode
+ */
+struct ceph_file_layout {
+	/* file -> object mapping */
+	__le32 fl_stripe_unit;     /* stripe unit, in bytes.  must be multiple
+				      of page size. */
+	__le32 fl_stripe_count;    /* over this many objects */
+	__le32 fl_object_size;     /* until objects are this big, then move to
+				      new objects */
+	__le32 fl_cas_hash;        /* UNUSED.  0 = none; 1 = sha256 */
+
+	/* pg -> disk layout */
+	__le32 fl_object_stripe_unit;  /* UNUSED.  for per-object parity, if any */
+
+	/* object -> pg layout */
+	__le32 fl_pg_preferred; /* preferred primary for pg (-1 for none) */
+	__le32 fl_pg_pool;      /* namespace, crush ruleset, rep level */
+} __attribute__ ((packed));
+
+#define CEPH_MIN_STRIPE_UNIT 65536
+
+int ceph_file_layout_is_valid(const struct ceph_file_layout *layout);
+
+struct ceph_dir_layout {
+	__u8   dl_dir_hash;   /* see ceph_hash.h for ids */
+	__u8   dl_unused1;
+	__u16  dl_unused2;
+	__u32  dl_unused3;
+} __attribute__ ((packed));
+
+/* crypto algorithms */
+#define CEPH_CRYPTO_NONE 0x0
+#define CEPH_CRYPTO_AES  0x1
+
+#define CEPH_AES_IV "cephsageyudagreg"
+
+/* security/authentication protocols */
+#define CEPH_AUTH_UNKNOWN	0x0
+#define CEPH_AUTH_NONE	 	0x1
+#define CEPH_AUTH_CEPHX	 	0x2
+
+#define CEPH_AUTH_UID_DEFAULT ((__u64) -1)
+
+
+/*********************************************
+ * message layer
+ */
+
+/*
+ * message types
+ */
+
+/* misc */
+#define CEPH_MSG_SHUTDOWN               1
+#define CEPH_MSG_PING                   2
+
+/* client <-> monitor */
+#define CEPH_MSG_MON_MAP                4
+#define CEPH_MSG_MON_GET_MAP            5
+#define CEPH_MSG_STATFS                 13
+#define CEPH_MSG_STATFS_REPLY           14
+#define CEPH_MSG_MON_SUBSCRIBE          15
+#define CEPH_MSG_MON_SUBSCRIBE_ACK      16
+#define CEPH_MSG_AUTH			17
+#define CEPH_MSG_AUTH_REPLY		18
+
+/* client <-> mds */
+#define CEPH_MSG_MDS_MAP                21
+
+#define CEPH_MSG_CLIENT_SESSION         22
+#define CEPH_MSG_CLIENT_RECONNECT       23
+
+#define CEPH_MSG_CLIENT_REQUEST         24
+#define CEPH_MSG_CLIENT_REQUEST_FORWARD 25
+#define CEPH_MSG_CLIENT_REPLY           26
+#define CEPH_MSG_CLIENT_CAPS            0x310
+#define CEPH_MSG_CLIENT_LEASE           0x311
+#define CEPH_MSG_CLIENT_SNAP            0x312
+#define CEPH_MSG_CLIENT_CAPRELEASE      0x313
+
+/* pool ops */
+#define CEPH_MSG_POOLOP_REPLY           48
+#define CEPH_MSG_POOLOP                 49
+
+
+/* osd */
+#define CEPH_MSG_OSD_MAP                41
+#define CEPH_MSG_OSD_OP                 42
+#define CEPH_MSG_OSD_OPREPLY            43
+#define CEPH_MSG_WATCH_NOTIFY           44
+
+
+/* watch-notify operations */
+enum {
+  WATCH_NOTIFY				= 1, /* notifying watcher */
+  WATCH_NOTIFY_COMPLETE			= 2, /* notifier notified when done */
+};
+
+
+/* pool operations */
+enum {
+  POOL_OP_CREATE			= 0x01,
+  POOL_OP_DELETE			= 0x02,
+  POOL_OP_AUID_CHANGE			= 0x03,
+  POOL_OP_CREATE_SNAP			= 0x11,
+  POOL_OP_DELETE_SNAP			= 0x12,
+  POOL_OP_CREATE_UNMANAGED_SNAP		= 0x21,
+  POOL_OP_DELETE_UNMANAGED_SNAP		= 0x22,
+};
+
+struct ceph_mon_request_header {
+	__le64 have_version;
+	__le16 session_mon;
+	__le64 session_mon_tid;
+} __attribute__ ((packed));
+
+struct ceph_mon_statfs {
+	struct ceph_mon_request_header monhdr;
+	struct ceph_fsid fsid;
+} __attribute__ ((packed));
+
+struct ceph_statfs {
+	__le64 kb, kb_used, kb_avail;
+	__le64 num_objects;
+} __attribute__ ((packed));
+
+struct ceph_mon_statfs_reply {
+	struct ceph_fsid fsid;
+	__le64 version;
+	struct ceph_statfs st;
+} __attribute__ ((packed));
+
+const char *ceph_pool_op_name(int op);
+
+struct ceph_mon_poolop {
+	struct ceph_mon_request_header monhdr;
+	struct ceph_fsid fsid;
+	__le32 pool;
+	__le32 op;
+	__le64 auid;
+	__le64 snapid;
+	__le32 name_len;
+} __attribute__ ((packed));
+
+struct ceph_mon_poolop_reply {
+	struct ceph_mon_request_header monhdr;
+	struct ceph_fsid fsid;
+	__le32 reply_code;
+	__le32 epoch;
+	char has_data;
+	char data[0];
+} __attribute__ ((packed));
+
+struct ceph_mon_unmanaged_snap {
+	__le64 snapid;
+} __attribute__ ((packed));
+
+struct ceph_osd_getmap {
+	struct ceph_mon_request_header monhdr;
+	struct ceph_fsid fsid;
+	__le32 start;
+} __attribute__ ((packed));
+
+struct ceph_mds_getmap {
+	struct ceph_mon_request_header monhdr;
+	struct ceph_fsid fsid;
+} __attribute__ ((packed));
+
+struct ceph_client_mount {
+	struct ceph_mon_request_header monhdr;
+} __attribute__ ((packed));
+
+#define CEPH_SUBSCRIBE_ONETIME    1  /* i want only 1 update after have */
+
+struct ceph_mon_subscribe_item {
+	__le64 have_version;    __le64 have;
+	__u8 onetime;
+} __attribute__ ((packed));
+
+struct ceph_mon_subscribe_ack {
+	__le32 duration;         /* seconds */
+	struct ceph_fsid fsid;
+} __attribute__ ((packed));
+
+/*
+ * mds states
+ *   > 0 -> in
+ *  <= 0 -> out
+ */
+#define CEPH_MDS_STATE_DNE          0  /* down, does not exist. */
+#define CEPH_MDS_STATE_STOPPED     -1  /* down, once existed, but no subtrees.
+					  empty log. */
+#define CEPH_MDS_STATE_BOOT        -4  /* up, boot announcement. */
+#define CEPH_MDS_STATE_STANDBY     -5  /* up, idle.  waiting for assignment. */
+#define CEPH_MDS_STATE_CREATING    -6  /* up, creating MDS instance. */
+#define CEPH_MDS_STATE_STARTING    -7  /* up, starting previously stopped mds */
+#define CEPH_MDS_STATE_STANDBY_REPLAY -8 /* up, tailing active node's journal */
+
+#define CEPH_MDS_STATE_REPLAY       8  /* up, replaying journal. */
+#define CEPH_MDS_STATE_RESOLVE      9  /* up, disambiguating distributed
+					  operations (import, rename, etc.) */
+#define CEPH_MDS_STATE_RECONNECT    10 /* up, reconnect to clients */
+#define CEPH_MDS_STATE_REJOIN       11 /* up, rejoining distributed cache */
+#define CEPH_MDS_STATE_CLIENTREPLAY 12 /* up, replaying client operations */
+#define CEPH_MDS_STATE_ACTIVE       13 /* up, active */
+#define CEPH_MDS_STATE_STOPPING     14 /* up, but exporting metadata */
+
+extern const char *ceph_mds_state_name(int s);
+
+
+/*
+ * metadata lock types.
+ *  - these are bitmasks.. we can compose them
+ *  - they also define the lock ordering by the MDS
+ *  - a few of these are internal to the mds
+ */
+#define CEPH_LOCK_DVERSION    1
+#define CEPH_LOCK_DN          2
+#define CEPH_LOCK_ISNAP       16
+#define CEPH_LOCK_IVERSION    32    /* mds internal */
+#define CEPH_LOCK_IFILE       64
+#define CEPH_LOCK_IAUTH       128
+#define CEPH_LOCK_ILINK       256
+#define CEPH_LOCK_IDFT        512   /* dir frag tree */
+#define CEPH_LOCK_INEST       1024  /* mds internal */
+#define CEPH_LOCK_IXATTR      2048
+#define CEPH_LOCK_IFLOCK      4096  /* advisory file locks */
+#define CEPH_LOCK_INO         8192  /* immutable inode bits; not a lock */
+
+/* client_session ops */
+enum {
+	CEPH_SESSION_REQUEST_OPEN,
+	CEPH_SESSION_OPEN,
+	CEPH_SESSION_REQUEST_CLOSE,
+	CEPH_SESSION_CLOSE,
+	CEPH_SESSION_REQUEST_RENEWCAPS,
+	CEPH_SESSION_RENEWCAPS,
+	CEPH_SESSION_STALE,
+	CEPH_SESSION_RECALL_STATE,
+};
+
+extern const char *ceph_session_op_name(int op);
+
+struct ceph_mds_session_head {
+	__le32 op;
+	__le64 seq;
+	struct ceph_timespec stamp;
+	__le32 max_caps, max_leases;
+} __attribute__ ((packed));
+
+/* client_request */
+/*
+ * metadata ops.
+ *  & 0x001000 -> write op
+ *  & 0x010000 -> follow symlink (e.g. stat(), not lstat()).
+ &  & 0x100000 -> use weird ino/path trace
+ */
+#define CEPH_MDS_OP_WRITE        0x001000
+enum {
+	CEPH_MDS_OP_LOOKUP     = 0x00100,
+	CEPH_MDS_OP_GETATTR    = 0x00101,
+	CEPH_MDS_OP_LOOKUPHASH = 0x00102,
+	CEPH_MDS_OP_LOOKUPPARENT = 0x00103,
+	CEPH_MDS_OP_LOOKUPINO  = 0x00104,
+
+	CEPH_MDS_OP_SETXATTR   = 0x01105,
+	CEPH_MDS_OP_RMXATTR    = 0x01106,
+	CEPH_MDS_OP_SETLAYOUT  = 0x01107,
+	CEPH_MDS_OP_SETATTR    = 0x01108,
+	CEPH_MDS_OP_SETFILELOCK= 0x01109,
+	CEPH_MDS_OP_GETFILELOCK= 0x00110,
+	CEPH_MDS_OP_SETDIRLAYOUT=0x0110a,
+
+	CEPH_MDS_OP_MKNOD      = 0x01201,
+	CEPH_MDS_OP_LINK       = 0x01202,
+	CEPH_MDS_OP_UNLINK     = 0x01203,
+	CEPH_MDS_OP_RENAME     = 0x01204,
+	CEPH_MDS_OP_MKDIR      = 0x01220,
+	CEPH_MDS_OP_RMDIR      = 0x01221,
+	CEPH_MDS_OP_SYMLINK    = 0x01222,
+
+	CEPH_MDS_OP_CREATE     = 0x01301,
+	CEPH_MDS_OP_OPEN       = 0x00302,
+	CEPH_MDS_OP_READDIR    = 0x00305,
+
+	CEPH_MDS_OP_LOOKUPSNAP = 0x00400,
+	CEPH_MDS_OP_MKSNAP     = 0x01400,
+	CEPH_MDS_OP_RMSNAP     = 0x01401,
+	CEPH_MDS_OP_LSSNAP     = 0x00402,
+};
+
+extern const char *ceph_mds_op_name(int op);
+
+
+#define CEPH_SETATTR_MODE   1
+#define CEPH_SETATTR_UID    2
+#define CEPH_SETATTR_GID    4
+#define CEPH_SETATTR_MTIME  8
+#define CEPH_SETATTR_ATIME 16
+#define CEPH_SETATTR_SIZE  32
+#define CEPH_SETATTR_CTIME 64
+
+union ceph_mds_request_args {
+	struct {
+		__le32 mask;                 /* CEPH_CAP_* */
+	} __attribute__ ((packed)) getattr;
+	struct {
+		__le32 mode;
+		__le32 uid;
+		__le32 gid;
+		struct ceph_timespec mtime;
+		struct ceph_timespec atime;
+		__le64 size, old_size;       /* old_size needed by truncate */
+		__le32 mask;                 /* CEPH_SETATTR_* */
+	} __attribute__ ((packed)) setattr;
+	struct {
+		__le32 frag;                 /* which dir fragment */
+		__le32 max_entries;          /* how many dentries to grab */
+		__le32 max_bytes;
+	} __attribute__ ((packed)) readdir;
+	struct {
+		__le32 mode;
+		__le32 rdev;
+	} __attribute__ ((packed)) mknod;
+	struct {
+		__le32 mode;
+	} __attribute__ ((packed)) mkdir;
+	struct {
+		__le32 flags;
+		__le32 mode;
+		__le32 stripe_unit;          /* layout for newly created file */
+		__le32 stripe_count;         /* ... */
+		__le32 object_size;
+		__le32 file_replication;
+		__le32 preferred;
+	} __attribute__ ((packed)) open;
+	struct {
+		__le32 flags;
+	} __attribute__ ((packed)) setxattr;
+	struct {
+		struct ceph_file_layout layout;
+	} __attribute__ ((packed)) setlayout;
+	struct {
+		__u8 rule; /* currently fcntl or flock */
+		__u8 type; /* shared, exclusive, remove*/
+		__le64 pid; /* process id requesting the lock */
+		__le64 pid_namespace;
+		__le64 start; /* initial location to lock */
+		__le64 length; /* num bytes to lock from start */
+		__u8 wait; /* will caller wait for lock to become available? */
+	} __attribute__ ((packed)) filelock_change;
+} __attribute__ ((packed));
+
+#define CEPH_MDS_FLAG_REPLAY        1  /* this is a replayed op */
+#define CEPH_MDS_FLAG_WANT_DENTRY   2  /* want dentry in reply */
+
+struct ceph_mds_request_head {
+	__le64 oldest_client_tid;
+	__le32 mdsmap_epoch;           /* on client */
+	__le32 flags;                  /* CEPH_MDS_FLAG_* */
+	__u8 num_retry, num_fwd;       /* count retry, fwd attempts */
+	__le16 num_releases;           /* # include cap/lease release records */
+	__le32 op;                     /* mds op code */
+	__le32 caller_uid, caller_gid;
+	__le64 ino;                    /* use this ino for openc, mkdir, mknod,
+					  etc. (if replaying) */
+	union ceph_mds_request_args args;
+} __attribute__ ((packed));
+
+/* cap/lease release record */
+struct ceph_mds_request_release {
+	__le64 ino, cap_id;            /* ino and unique cap id */
+	__le32 caps, wanted;           /* new issued, wanted */
+	__le32 seq, issue_seq, mseq;
+	__le32 dname_seq;              /* if releasing a dentry lease, a */
+	__le32 dname_len;              /* string follows. */
+} __attribute__ ((packed));
+
+/* client reply */
+struct ceph_mds_reply_head {
+	__le32 op;
+	__le32 result;
+	__le32 mdsmap_epoch;
+	__u8 safe;                     /* true if committed to disk */
+	__u8 is_dentry, is_target;     /* true if dentry, target inode records
+					  are included with reply */
+} __attribute__ ((packed));
+
+/* one for each node split */
+struct ceph_frag_tree_split {
+	__le32 frag;                   /* this frag splits... */
+	__le32 by;                     /* ...by this many bits */
+} __attribute__ ((packed));
+
+struct ceph_frag_tree_head {
+	__le32 nsplits;                /* num ceph_frag_tree_split records */
+	struct ceph_frag_tree_split splits[];
+} __attribute__ ((packed));
+
+/* capability issue, for bundling with mds reply */
+struct ceph_mds_reply_cap {
+	__le32 caps, wanted;           /* caps issued, wanted */
+	__le64 cap_id;
+	__le32 seq, mseq;
+	__le64 realm;                  /* snap realm */
+	__u8 flags;                    /* CEPH_CAP_FLAG_* */
+} __attribute__ ((packed));
+
+#define CEPH_CAP_FLAG_AUTH  1          /* cap is issued by auth mds */
+
+/* inode record, for bundling with mds reply */
+struct ceph_mds_reply_inode {
+	__le64 ino;
+	__le64 snapid;
+	__le32 rdev;
+	__le64 version;                /* inode version */
+	__le64 xattr_version;          /* version for xattr blob */
+	struct ceph_mds_reply_cap cap; /* caps issued for this inode */
+	struct ceph_file_layout layout;
+	struct ceph_timespec ctime, mtime, atime;
+	__le32 time_warp_seq;
+	__le64 size, max_size, truncate_size;
+	__le32 truncate_seq;
+	__le32 mode, uid, gid;
+	__le32 nlink;
+	__le64 files, subdirs, rbytes, rfiles, rsubdirs;  /* dir stats */
+	struct ceph_timespec rctime;
+	struct ceph_frag_tree_head fragtree;  /* (must be at end of struct) */
+} __attribute__ ((packed));
+/* followed by frag array, symlink string, dir layout, xattr blob */
+
+/* reply_lease follows dname, and reply_inode */
+struct ceph_mds_reply_lease {
+	__le16 mask;            /* lease type(s) */
+	__le32 duration_ms;     /* lease duration */
+	__le32 seq;
+} __attribute__ ((packed));
+
+struct ceph_mds_reply_dirfrag {
+	__le32 frag;            /* fragment */
+	__le32 auth;            /* auth mds, if this is a delegation point */
+	__le32 ndist;           /* number of mds' this is replicated on */
+	__le32 dist[];
+} __attribute__ ((packed));
+
+#define CEPH_LOCK_FCNTL    1
+#define CEPH_LOCK_FLOCK    2
+
+#define CEPH_LOCK_SHARED   1
+#define CEPH_LOCK_EXCL     2
+#define CEPH_LOCK_UNLOCK   4
+
+struct ceph_filelock {
+	__le64 start;/* file offset to start lock at */
+	__le64 length; /* num bytes to lock; 0 for all following start */
+	__le64 client; /* which client holds the lock */
+	__le64 pid; /* process id holding the lock on the client */
+	__le64 pid_namespace;
+	__u8 type; /* shared lock, exclusive lock, or unlock */
+} __attribute__ ((packed));
+
+
+/* file access modes */
+#define CEPH_FILE_MODE_PIN        0
+#define CEPH_FILE_MODE_RD         1
+#define CEPH_FILE_MODE_WR         2
+#define CEPH_FILE_MODE_RDWR       3  /* RD | WR */
+#define CEPH_FILE_MODE_LAZY       4  /* lazy io */
+#define CEPH_FILE_MODE_NUM        8  /* bc these are bit fields.. mostly */
+
+int ceph_flags_to_mode(int flags);
+
+
+/* capability bits */
+#define CEPH_CAP_PIN         1  /* no specific capabilities beyond the pin */
+
+/* generic cap bits */
+#define CEPH_CAP_GSHARED     1  /* client can reads */
+#define CEPH_CAP_GEXCL       2  /* client can read and update */
+#define CEPH_CAP_GCACHE      4  /* (file) client can cache reads */
+#define CEPH_CAP_GRD         8  /* (file) client can read */
+#define CEPH_CAP_GWR        16  /* (file) client can write */
+#define CEPH_CAP_GBUFFER    32  /* (file) client can buffer writes */
+#define CEPH_CAP_GWREXTEND  64  /* (file) client can extend EOF */
+#define CEPH_CAP_GLAZYIO   128  /* (file) client can perform lazy io */
+
+/* per-lock shift */
+#define CEPH_CAP_SAUTH      2
+#define CEPH_CAP_SLINK      4
+#define CEPH_CAP_SXATTR     6
+#define CEPH_CAP_SFILE      8
+#define CEPH_CAP_SFLOCK    20 
+
+#define CEPH_CAP_BITS       22
+
+/* composed values */
+#define CEPH_CAP_AUTH_SHARED  (CEPH_CAP_GSHARED  << CEPH_CAP_SAUTH)
+#define CEPH_CAP_AUTH_EXCL     (CEPH_CAP_GEXCL     << CEPH_CAP_SAUTH)
+#define CEPH_CAP_LINK_SHARED  (CEPH_CAP_GSHARED  << CEPH_CAP_SLINK)
+#define CEPH_CAP_LINK_EXCL     (CEPH_CAP_GEXCL     << CEPH_CAP_SLINK)
+#define CEPH_CAP_XATTR_SHARED (CEPH_CAP_GSHARED  << CEPH_CAP_SXATTR)
+#define CEPH_CAP_XATTR_EXCL    (CEPH_CAP_GEXCL     << CEPH_CAP_SXATTR)
+#define CEPH_CAP_FILE(x)    (x << CEPH_CAP_SFILE)
+#define CEPH_CAP_FILE_SHARED   (CEPH_CAP_GSHARED   << CEPH_CAP_SFILE)
+#define CEPH_CAP_FILE_EXCL     (CEPH_CAP_GEXCL     << CEPH_CAP_SFILE)
+#define CEPH_CAP_FILE_CACHE    (CEPH_CAP_GCACHE    << CEPH_CAP_SFILE)
+#define CEPH_CAP_FILE_RD       (CEPH_CAP_GRD       << CEPH_CAP_SFILE)
+#define CEPH_CAP_FILE_WR       (CEPH_CAP_GWR       << CEPH_CAP_SFILE)
+#define CEPH_CAP_FILE_BUFFER   (CEPH_CAP_GBUFFER   << CEPH_CAP_SFILE)
+#define CEPH_CAP_FILE_WREXTEND (CEPH_CAP_GWREXTEND << CEPH_CAP_SFILE)
+#define CEPH_CAP_FILE_LAZYIO   (CEPH_CAP_GLAZYIO   << CEPH_CAP_SFILE)
+#define CEPH_CAP_FLOCK_SHARED  (CEPH_CAP_GSHARED   << CEPH_CAP_SFLOCK)
+#define CEPH_CAP_FLOCK_EXCL    (CEPH_CAP_GEXCL     << CEPH_CAP_SFLOCK)
+
+
+/* cap masks (for getattr) */
+#define CEPH_STAT_CAP_INODE    CEPH_CAP_PIN
+#define CEPH_STAT_CAP_TYPE     CEPH_CAP_PIN  /* mode >> 12 */
+#define CEPH_STAT_CAP_SYMLINK  CEPH_CAP_PIN
+#define CEPH_STAT_CAP_UID      CEPH_CAP_AUTH_SHARED
+#define CEPH_STAT_CAP_GID      CEPH_CAP_AUTH_SHARED
+#define CEPH_STAT_CAP_MODE     CEPH_CAP_AUTH_SHARED
+#define CEPH_STAT_CAP_NLINK    CEPH_CAP_LINK_SHARED
+#define CEPH_STAT_CAP_LAYOUT   CEPH_CAP_FILE_SHARED
+#define CEPH_STAT_CAP_MTIME    CEPH_CAP_FILE_SHARED
+#define CEPH_STAT_CAP_SIZE     CEPH_CAP_FILE_SHARED
+#define CEPH_STAT_CAP_ATIME    CEPH_CAP_FILE_SHARED  /* fixme */
+#define CEPH_STAT_CAP_XATTR    CEPH_CAP_XATTR_SHARED
+#define CEPH_STAT_CAP_INODE_ALL (CEPH_CAP_PIN |			\
+				 CEPH_CAP_AUTH_SHARED |	\
+				 CEPH_CAP_LINK_SHARED |	\
+				 CEPH_CAP_FILE_SHARED |	\
+				 CEPH_CAP_XATTR_SHARED)
+
+#define CEPH_CAP_ANY_SHARED (CEPH_CAP_AUTH_SHARED |			\
+			      CEPH_CAP_LINK_SHARED |			\
+			      CEPH_CAP_XATTR_SHARED |			\
+			      CEPH_CAP_FILE_SHARED)
+#define CEPH_CAP_ANY_RD   (CEPH_CAP_ANY_SHARED | CEPH_CAP_FILE_RD |	\
+			   CEPH_CAP_FILE_CACHE)
+
+#define CEPH_CAP_ANY_EXCL (CEPH_CAP_AUTH_EXCL |		\
+			   CEPH_CAP_LINK_EXCL |		\
+			   CEPH_CAP_XATTR_EXCL |	\
+			   CEPH_CAP_FILE_EXCL)
+#define CEPH_CAP_ANY_FILE_WR (CEPH_CAP_FILE_WR | CEPH_CAP_FILE_BUFFER |	\
+			      CEPH_CAP_FILE_EXCL)
+#define CEPH_CAP_ANY_WR   (CEPH_CAP_ANY_EXCL | CEPH_CAP_ANY_FILE_WR)
+#define CEPH_CAP_ANY      (CEPH_CAP_ANY_RD | CEPH_CAP_ANY_EXCL | \
+			   CEPH_CAP_ANY_FILE_WR | CEPH_CAP_FILE_LAZYIO | \
+			   CEPH_CAP_PIN)
+
+#define CEPH_CAP_LOCKS (CEPH_LOCK_IFILE | CEPH_LOCK_IAUTH | CEPH_LOCK_ILINK | \
+			CEPH_LOCK_IXATTR)
+
+int ceph_caps_for_mode(int mode);
+
+enum {
+	CEPH_CAP_OP_GRANT,         /* mds->client grant */
+	CEPH_CAP_OP_REVOKE,        /* mds->client revoke */
+	CEPH_CAP_OP_TRUNC,         /* mds->client trunc notify */
+	CEPH_CAP_OP_EXPORT,        /* mds has exported the cap */
+	CEPH_CAP_OP_IMPORT,        /* mds has imported the cap */
+	CEPH_CAP_OP_UPDATE,        /* client->mds update */
+	CEPH_CAP_OP_DROP,          /* client->mds drop cap bits */
+	CEPH_CAP_OP_FLUSH,         /* client->mds cap writeback */
+	CEPH_CAP_OP_FLUSH_ACK,     /* mds->client flushed */
+	CEPH_CAP_OP_FLUSHSNAP,     /* client->mds flush snapped metadata */
+	CEPH_CAP_OP_FLUSHSNAP_ACK, /* mds->client flushed snapped metadata */
+	CEPH_CAP_OP_RELEASE,       /* client->mds release (clean) cap */
+	CEPH_CAP_OP_RENEW,         /* client->mds renewal request */
+};
+
+extern const char *ceph_cap_op_name(int op);
+
+/*
+ * caps message, used for capability callbacks, acks, requests, etc.
+ */
+struct ceph_mds_caps {
+	__le32 op;                  /* CEPH_CAP_OP_* */
+	__le64 ino, realm;
+	__le64 cap_id;
+	__le32 seq, issue_seq;
+	__le32 caps, wanted, dirty; /* latest issued/wanted/dirty */
+	__le32 migrate_seq;
+	__le64 snap_follows;
+	__le32 snap_trace_len;
+
+	/* authlock */
+	__le32 uid, gid, mode;
+
+	/* linklock */
+	__le32 nlink;
+
+	/* xattrlock */
+	__le32 xattr_len;
+	__le64 xattr_version;
+
+	/* filelock */
+	__le64 size, max_size, truncate_size;
+	__le32 truncate_seq;
+	struct ceph_timespec mtime, atime, ctime;
+	struct ceph_file_layout layout;
+	__le32 time_warp_seq;
+} __attribute__ ((packed));
+
+/* cap release msg head */
+struct ceph_mds_cap_release {
+	__le32 num;                /* number of cap_items that follow */
+} __attribute__ ((packed));
+
+struct ceph_mds_cap_item {
+	__le64 ino;
+	__le64 cap_id;
+	__le32 migrate_seq, seq;
+} __attribute__ ((packed));
+
+#define CEPH_MDS_LEASE_REVOKE           1  /*    mds  -> client */
+#define CEPH_MDS_LEASE_RELEASE          2  /* client  -> mds    */
+#define CEPH_MDS_LEASE_RENEW            3  /* client <-> mds    */
+#define CEPH_MDS_LEASE_REVOKE_ACK       4  /* client  -> mds    */
+
+extern const char *ceph_lease_op_name(int o);
+
+/* lease msg header */
+struct ceph_mds_lease {
+	__u8 action;            /* CEPH_MDS_LEASE_* */
+	__le16 mask;            /* which lease */
+	__le64 ino;
+	__le64 first, last;     /* snap range */
+	__le32 seq;
+	__le32 duration_ms;     /* duration of renewal */
+} __attribute__ ((packed));
+/* followed by a __le32+string for dname */
+
+/* client reconnect */
+struct ceph_mds_cap_reconnect {
+	__le64 cap_id;
+	__le32 wanted;
+	__le32 issued;
+	__le64 snaprealm;
+	__le64 pathbase;        /* base ino for our path to this ino */
+	__le32 flock_len;       /* size of flock state blob, if any */
+} __attribute__ ((packed));
+/* followed by flock blob */
+
+struct ceph_mds_cap_reconnect_v1 {
+	__le64 cap_id;
+	__le32 wanted;
+	__le32 issued;
+	__le64 size;
+	struct ceph_timespec mtime, atime;
+	__le64 snaprealm;
+	__le64 pathbase;        /* base ino for our path to this ino */
+} __attribute__ ((packed));
+
+struct ceph_mds_snaprealm_reconnect {
+	__le64 ino;     /* snap realm base */
+	__le64 seq;     /* snap seq for this snap realm */
+	__le64 parent;  /* parent realm */
+} __attribute__ ((packed));
+
+/*
+ * snaps
+ */
+enum {
+	CEPH_SNAP_OP_UPDATE,  /* CREATE or DESTROY */
+	CEPH_SNAP_OP_CREATE,
+	CEPH_SNAP_OP_DESTROY,
+	CEPH_SNAP_OP_SPLIT,
+};
+
+extern const char *ceph_snap_op_name(int o);
+
+/* snap msg header */
+struct ceph_mds_snap_head {
+	__le32 op;                /* CEPH_SNAP_OP_* */
+	__le64 split;             /* ino to split off, if any */
+	__le32 num_split_inos;    /* # inos belonging to new child realm */
+	__le32 num_split_realms;  /* # child realms udner new child realm */
+	__le32 trace_len;         /* size of snap trace blob */
+} __attribute__ ((packed));
+/* followed by split ino list, then split realms, then the trace blob */
+
+/*
+ * encode info about a snaprealm, as viewed by a client
+ */
+struct ceph_mds_snap_realm {
+	__le64 ino;           /* ino */
+	__le64 created;       /* snap: when created */
+	__le64 parent;        /* ino: parent realm */
+	__le64 parent_since;  /* snap: same parent since */
+	__le64 seq;           /* snap: version */
+	__le32 num_snaps;
+	__le32 num_prior_parent_snaps;
+} __attribute__ ((packed));
+/* followed by my snap list, then prior parent snap list */
+
+#endif
diff --git a/include/linux/ceph/ceph_hash.h b/include/linux/ceph/ceph_hash.h
new file mode 100644
index 00000000..d099c3f9
--- /dev/null
+++ b/include/linux/ceph/ceph_hash.h
@@ -0,0 +1,13 @@
+#ifndef FS_CEPH_HASH_H
+#define FS_CEPH_HASH_H
+
+#define CEPH_STR_HASH_LINUX      0x1  /* linux dcache hash */
+#define CEPH_STR_HASH_RJENKINS   0x2  /* robert jenkins' */
+
+extern unsigned ceph_str_hash_linux(const char *s, unsigned len);
+extern unsigned ceph_str_hash_rjenkins(const char *s, unsigned len);
+
+extern unsigned ceph_str_hash(int type, const char *s, unsigned len);
+extern const char *ceph_str_hash_name(int type);
+
+#endif
diff --git a/include/linux/ceph/debugfs.h b/include/linux/ceph/debugfs.h
new file mode 100644
index 00000000..2a79702e
--- /dev/null
+++ b/include/linux/ceph/debugfs.h
@@ -0,0 +1,33 @@
+#ifndef _FS_CEPH_DEBUGFS_H
+#define _FS_CEPH_DEBUGFS_H
+
+#include "ceph_debug.h"
+#include "types.h"
+
+#define CEPH_DEFINE_SHOW_FUNC(name)					\
+static int name##_open(struct inode *inode, struct file *file)		\
+{									\
+	struct seq_file *sf;						\
+	int ret;							\
+									\
+	ret = single_open(file, name, NULL);				\
+	sf = file->private_data;					\
+	sf->private = inode->i_private;					\
+	return ret;							\
+}									\
+									\
+static const struct file_operations name##_fops = {			\
+	.open		= name##_open,					\
+	.read		= seq_read,					\
+	.llseek		= seq_lseek,					\
+	.release	= single_release,				\
+};
+
+/* debugfs.c */
+extern int ceph_debugfs_init(void);
+extern void ceph_debugfs_cleanup(void);
+extern int ceph_debugfs_client_init(struct ceph_client *client);
+extern void ceph_debugfs_client_cleanup(struct ceph_client *client);
+
+#endif
+
diff --git a/include/linux/ceph/decode.h b/include/linux/ceph/decode.h
new file mode 100644
index 00000000..220ae21e
--- /dev/null
+++ b/include/linux/ceph/decode.h
@@ -0,0 +1,202 @@
+#ifndef __CEPH_DECODE_H
+#define __CEPH_DECODE_H
+
+#include <linux/bug.h>
+#include <linux/time.h>
+#include <asm/unaligned.h>
+
+#include "types.h"
+
+/*
+ * in all cases,
+ *   void **p     pointer to position pointer
+ *   void *end    pointer to end of buffer (last byte + 1)
+ */
+
+static inline u64 ceph_decode_64(void **p)
+{
+	u64 v = get_unaligned_le64(*p);
+	*p += sizeof(u64);
+	return v;
+}
+static inline u32 ceph_decode_32(void **p)
+{
+	u32 v = get_unaligned_le32(*p);
+	*p += sizeof(u32);
+	return v;
+}
+static inline u16 ceph_decode_16(void **p)
+{
+	u16 v = get_unaligned_le16(*p);
+	*p += sizeof(u16);
+	return v;
+}
+static inline u8 ceph_decode_8(void **p)
+{
+	u8 v = *(u8 *)*p;
+	(*p)++;
+	return v;
+}
+static inline void ceph_decode_copy(void **p, void *pv, size_t n)
+{
+	memcpy(pv, *p, n);
+	*p += n;
+}
+
+/*
+ * bounds check input.
+ */
+#define ceph_decode_need(p, end, n, bad)		\
+	do {						\
+		if (unlikely(*(p) + (n) > (end))) 	\
+			goto bad;			\
+	} while (0)
+
+#define ceph_decode_64_safe(p, end, v, bad)			\
+	do {							\
+		ceph_decode_need(p, end, sizeof(u64), bad);	\
+		v = ceph_decode_64(p);				\
+	} while (0)
+#define ceph_decode_32_safe(p, end, v, bad)			\
+	do {							\
+		ceph_decode_need(p, end, sizeof(u32), bad);	\
+		v = ceph_decode_32(p);				\
+	} while (0)
+#define ceph_decode_16_safe(p, end, v, bad)			\
+	do {							\
+		ceph_decode_need(p, end, sizeof(u16), bad);	\
+		v = ceph_decode_16(p);				\
+	} while (0)
+#define ceph_decode_8_safe(p, end, v, bad)			\
+	do {							\
+		ceph_decode_need(p, end, sizeof(u8), bad);	\
+		v = ceph_decode_8(p);				\
+	} while (0)
+
+#define ceph_decode_copy_safe(p, end, pv, n, bad)		\
+	do {							\
+		ceph_decode_need(p, end, n, bad);		\
+		ceph_decode_copy(p, pv, n);			\
+	} while (0)
+
+/*
+ * struct ceph_timespec <-> struct timespec
+ */
+static inline void ceph_decode_timespec(struct timespec *ts,
+					const struct ceph_timespec *tv)
+{
+	ts->tv_sec = le32_to_cpu(tv->tv_sec);
+	ts->tv_nsec = le32_to_cpu(tv->tv_nsec);
+}
+static inline void ceph_encode_timespec(struct ceph_timespec *tv,
+					const struct timespec *ts)
+{
+	tv->tv_sec = cpu_to_le32(ts->tv_sec);
+	tv->tv_nsec = cpu_to_le32(ts->tv_nsec);
+}
+
+/*
+ * sockaddr_storage <-> ceph_sockaddr
+ */
+static inline void ceph_encode_addr(struct ceph_entity_addr *a)
+{
+	__be16 ss_family = htons(a->in_addr.ss_family);
+	a->in_addr.ss_family = *(__u16 *)&ss_family;
+}
+static inline void ceph_decode_addr(struct ceph_entity_addr *a)
+{
+	__be16 ss_family = *(__be16 *)&a->in_addr.ss_family;
+	a->in_addr.ss_family = ntohs(ss_family);
+	WARN_ON(a->in_addr.ss_family == 512);
+}
+
+/*
+ * encoders
+ */
+static inline void ceph_encode_64(void **p, u64 v)
+{
+	put_unaligned_le64(v, (__le64 *)*p);
+	*p += sizeof(u64);
+}
+static inline void ceph_encode_32(void **p, u32 v)
+{
+	put_unaligned_le32(v, (__le32 *)*p);
+	*p += sizeof(u32);
+}
+static inline void ceph_encode_16(void **p, u16 v)
+{
+	put_unaligned_le16(v, (__le16 *)*p);
+	*p += sizeof(u16);
+}
+static inline void ceph_encode_8(void **p, u8 v)
+{
+	*(u8 *)*p = v;
+	(*p)++;
+}
+static inline void ceph_encode_copy(void **p, const void *s, int len)
+{
+	memcpy(*p, s, len);
+	*p += len;
+}
+
+/*
+ * filepath, string encoders
+ */
+static inline void ceph_encode_filepath(void **p, void *end,
+					u64 ino, const char *path)
+{
+	u32 len = path ? strlen(path) : 0;
+	BUG_ON(*p + sizeof(ino) + sizeof(len) + len > end);
+	ceph_encode_8(p, 1);
+	ceph_encode_64(p, ino);
+	ceph_encode_32(p, len);
+	if (len)
+		memcpy(*p, path, len);
+	*p += len;
+}
+
+static inline void ceph_encode_string(void **p, void *end,
+				      const char *s, u32 len)
+{
+	BUG_ON(*p + sizeof(len) + len > end);
+	ceph_encode_32(p, len);
+	if (len)
+		memcpy(*p, s, len);
+	*p += len;
+}
+
+#define ceph_encode_need(p, end, n, bad)		\
+	do {						\
+		if (unlikely(*(p) + (n) > (end))) 	\
+			goto bad;			\
+	} while (0)
+
+#define ceph_encode_64_safe(p, end, v, bad)			\
+	do {							\
+		ceph_encode_need(p, end, sizeof(u64), bad);	\
+		ceph_encode_64(p, v);				\
+	} while (0)
+#define ceph_encode_32_safe(p, end, v, bad)			\
+	do {							\
+		ceph_encode_need(p, end, sizeof(u32), bad);	\
+		ceph_encode_32(p, v);			\
+	} while (0)
+#define ceph_encode_16_safe(p, end, v, bad)			\
+	do {							\
+		ceph_encode_need(p, end, sizeof(u16), bad);	\
+		ceph_encode_16(p, v);			\
+	} while (0)
+
+#define ceph_encode_copy_safe(p, end, pv, n, bad)		\
+	do {							\
+		ceph_encode_need(p, end, n, bad);		\
+		ceph_encode_copy(p, pv, n);			\
+	} while (0)
+#define ceph_encode_string_safe(p, end, s, n, bad)		\
+	do {							\
+		ceph_encode_need(p, end, n, bad);		\
+		ceph_encode_string(p, end, s, n);		\
+	} while (0)
+
+
+#endif
diff --git a/include/linux/ceph/libceph.h b/include/linux/ceph/libceph.h
new file mode 100644
index 00000000..e71d6839
--- /dev/null
+++ b/include/linux/ceph/libceph.h
@@ -0,0 +1,252 @@
+#ifndef _FS_CEPH_LIBCEPH_H
+#define _FS_CEPH_LIBCEPH_H
+
+#include "ceph_debug.h"
+
+#include <asm/unaligned.h>
+#include <linux/backing-dev.h>
+#include <linux/completion.h>
+#include <linux/exportfs.h>
+#include <linux/bug.h>
+#include <linux/fs.h>
+#include <linux/mempool.h>
+#include <linux/pagemap.h>
+#include <linux/wait.h>
+#include <linux/writeback.h>
+#include <linux/slab.h>
+
+#include "types.h"
+#include "messenger.h"
+#include "msgpool.h"
+#include "mon_client.h"
+#include "osd_client.h"
+#include "ceph_fs.h"
+
+/*
+ * Supported features
+ */
+#define CEPH_FEATURE_SUPPORTED_DEFAULT CEPH_FEATURE_NOSRCADDR
+#define CEPH_FEATURE_REQUIRED_DEFAULT  CEPH_FEATURE_NOSRCADDR
+
+/*
+ * mount options
+ */
+#define CEPH_OPT_FSID             (1<<0)
+#define CEPH_OPT_NOSHARE          (1<<1) /* don't share client with other sbs */
+#define CEPH_OPT_MYIP             (1<<2) /* specified my ip */
+#define CEPH_OPT_NOCRC            (1<<3) /* no data crc on writes */
+
+#define CEPH_OPT_DEFAULT   (0)
+
+#define ceph_set_opt(client, opt) \
+	(client)->options->flags |= CEPH_OPT_##opt;
+#define ceph_test_opt(client, opt) \
+	(!!((client)->options->flags & CEPH_OPT_##opt))
+
+struct ceph_options {
+	int flags;
+	struct ceph_fsid fsid;
+	struct ceph_entity_addr my_addr;
+	int mount_timeout;
+	int osd_idle_ttl;
+	int osd_timeout;
+	int osd_keepalive_timeout;
+
+	/*
+	 * any type that can't be simply compared or doesn't need need
+	 * to be compared should go beyond this point,
+	 * ceph_compare_options() should be updated accordingly
+	 */
+
+	struct ceph_entity_addr *mon_addr; /* should be the first
+					      pointer type of args */
+	int num_mon;
+	char *name;
+	struct ceph_crypto_key *key;
+};
+
+/*
+ * defaults
+ */
+#define CEPH_MOUNT_TIMEOUT_DEFAULT  60
+#define CEPH_OSD_TIMEOUT_DEFAULT    60  /* seconds */
+#define CEPH_OSD_KEEPALIVE_DEFAULT  5
+#define CEPH_OSD_IDLE_TTL_DEFAULT    60
+
+#define CEPH_MSG_MAX_FRONT_LEN	(16*1024*1024)
+#define CEPH_MSG_MAX_DATA_LEN	(16*1024*1024)
+
+#define CEPH_AUTH_NAME_DEFAULT   "guest"
+
+/*
+ * Delay telling the MDS we no longer want caps, in case we reopen
+ * the file.  Delay a minimum amount of time, even if we send a cap
+ * message for some other reason.  Otherwise, take the oppotunity to
+ * update the mds to avoid sending another message later.
+ */
+#define CEPH_CAPS_WANTED_DELAY_MIN_DEFAULT      5  /* cap release delay */
+#define CEPH_CAPS_WANTED_DELAY_MAX_DEFAULT     60  /* cap release delay */
+
+#define CEPH_CAP_RELEASE_SAFETY_DEFAULT        (CEPH_CAPS_PER_RELEASE * 4)
+
+/* mount state */
+enum {
+	CEPH_MOUNT_MOUNTING,
+	CEPH_MOUNT_MOUNTED,
+	CEPH_MOUNT_UNMOUNTING,
+	CEPH_MOUNT_UNMOUNTED,
+	CEPH_MOUNT_SHUTDOWN,
+};
+
+/*
+ * subtract jiffies
+ */
+static inline unsigned long time_sub(unsigned long a, unsigned long b)
+{
+	BUG_ON(time_after(b, a));
+	return (long)a - (long)b;
+}
+
+struct ceph_mds_client;
+
+/*
+ * per client state
+ *
+ * possibly shared by multiple mount points, if they are
+ * mounting the same ceph filesystem/cluster.
+ */
+struct ceph_client {
+	struct ceph_fsid fsid;
+	bool have_fsid;
+
+	void *private;
+
+	struct ceph_options *options;
+
+	struct mutex mount_mutex;      /* serialize mount attempts */
+	wait_queue_head_t auth_wq;
+	int auth_err;
+
+	int (*extra_mon_dispatch)(struct ceph_client *, struct ceph_msg *);
+
+	u32 supported_features;
+	u32 required_features;
+
+	struct ceph_messenger *msgr;   /* messenger instance */
+	struct ceph_mon_client monc;
+	struct ceph_osd_client osdc;
+
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *debugfs_dir;
+	struct dentry *debugfs_monmap;
+	struct dentry *debugfs_osdmap;
+#endif
+};
+
+
+
+/*
+ * snapshots
+ */
+
+/*
+ * A "snap context" is the set of existing snapshots when we
+ * write data.  It is used by the OSD to guide its COW behavior.
+ *
+ * The ceph_snap_context is refcounted, and attached to each dirty
+ * page, indicating which context the dirty data belonged when it was
+ * dirtied.
+ */
+struct ceph_snap_context {
+	atomic_t nref;
+	u64 seq;
+	int num_snaps;
+	u64 snaps[];
+};
+
+static inline struct ceph_snap_context *
+ceph_get_snap_context(struct ceph_snap_context *sc)
+{
+	/*
+	printk("get_snap_context %p %d -> %d\n", sc, atomic_read(&sc->nref),
+	       atomic_read(&sc->nref)+1);
+	*/
+	if (sc)
+		atomic_inc(&sc->nref);
+	return sc;
+}
+
+static inline void ceph_put_snap_context(struct ceph_snap_context *sc)
+{
+	if (!sc)
+		return;
+	/*
+	printk("put_snap_context %p %d -> %d\n", sc, atomic_read(&sc->nref),
+	       atomic_read(&sc->nref)-1);
+	*/
+	if (atomic_dec_and_test(&sc->nref)) {
+		/*printk(" deleting snap_context %p\n", sc);*/
+		kfree(sc);
+	}
+}
+
+/*
+ * calculate the number of pages a given length and offset map onto,
+ * if we align the data.
+ */
+static inline int calc_pages_for(u64 off, u64 len)
+{
+	return ((off+len+PAGE_CACHE_SIZE-1) >> PAGE_CACHE_SHIFT) -
+		(off >> PAGE_CACHE_SHIFT);
+}
+
+/* ceph_common.c */
+extern const char *ceph_msg_type_name(int type);
+extern int ceph_check_fsid(struct ceph_client *client, struct ceph_fsid *fsid);
+extern struct kmem_cache *ceph_inode_cachep;
+extern struct kmem_cache *ceph_cap_cachep;
+extern struct kmem_cache *ceph_dentry_cachep;
+extern struct kmem_cache *ceph_file_cachep;
+
+extern struct ceph_options *ceph_parse_options(char *options,
+			      const char *dev_name, const char *dev_name_end,
+			      int (*parse_extra_token)(char *c, void *private),
+			      void *private);
+extern void ceph_destroy_options(struct ceph_options *opt);
+extern int ceph_compare_options(struct ceph_options *new_opt,
+				struct ceph_client *client);
+extern struct ceph_client *ceph_create_client(struct ceph_options *opt,
+					      void *private,
+					      unsigned supported_features,
+					      unsigned required_features);
+extern u64 ceph_client_id(struct ceph_client *client);
+extern void ceph_destroy_client(struct ceph_client *client);
+extern int __ceph_open_session(struct ceph_client *client,
+			       unsigned long started);
+extern int ceph_open_session(struct ceph_client *client);
+
+/* pagevec.c */
+extern void ceph_release_page_vector(struct page **pages, int num_pages);
+
+extern struct page **ceph_get_direct_page_vector(const char __user *data,
+						 int num_pages,
+						 bool write_page);
+extern void ceph_put_page_vector(struct page **pages, int num_pages,
+				 bool dirty);
+extern void ceph_release_page_vector(struct page **pages, int num_pages);
+extern struct page **ceph_alloc_page_vector(int num_pages, gfp_t flags);
+extern int ceph_copy_user_to_page_vector(struct page **pages,
+					 const char __user *data,
+					 loff_t off, size_t len);
+extern int ceph_copy_to_page_vector(struct page **pages,
+				    const char *data,
+				    loff_t off, size_t len);
+extern int ceph_copy_from_page_vector(struct page **pages,
+				    char *data,
+				    loff_t off, size_t len);
+extern int ceph_copy_page_vector_to_user(struct page **pages, char __user *data,
+				    loff_t off, size_t len);
+extern void ceph_zero_page_vector_range(int off, int len, struct page **pages);
+
+
+#endif /* _FS_CEPH_SUPER_H */
diff --git a/include/linux/ceph/mdsmap.h b/include/linux/ceph/mdsmap.h
new file mode 100644
index 00000000..9935fac8
--- /dev/null
+++ b/include/linux/ceph/mdsmap.h
@@ -0,0 +1,63 @@
+#ifndef _FS_CEPH_MDSMAP_H
+#define _FS_CEPH_MDSMAP_H
+
+#include <linux/bug.h>
+#include "types.h"
+
+/*
+ * mds map - describe servers in the mds cluster.
+ *
+ * we limit fields to those the client actually xcares about
+ */
+struct ceph_mds_info {
+	u64 global_id;
+	struct ceph_entity_addr addr;
+	s32 state;
+	int num_export_targets;
+	bool laggy;
+	u32 *export_targets;
+};
+
+struct ceph_mdsmap {
+	u32 m_epoch, m_client_epoch, m_last_failure;
+	u32 m_root;
+	u32 m_session_timeout;          /* seconds */
+	u32 m_session_autoclose;        /* seconds */
+	u64 m_max_file_size;
+	u32 m_max_mds;                  /* size of m_addr, m_state arrays */
+	struct ceph_mds_info *m_info;
+
+	/* which object pools file data can be stored in */
+	int m_num_data_pg_pools;
+	u32 *m_data_pg_pools;
+	u32 m_cas_pg_pool;
+};
+
+static inline struct ceph_entity_addr *
+ceph_mdsmap_get_addr(struct ceph_mdsmap *m, int w)
+{
+	if (w >= m->m_max_mds)
+		return NULL;
+	return &m->m_info[w].addr;
+}
+
+static inline int ceph_mdsmap_get_state(struct ceph_mdsmap *m, int w)
+{
+	BUG_ON(w < 0);
+	if (w >= m->m_max_mds)
+		return CEPH_MDS_STATE_DNE;
+	return m->m_info[w].state;
+}
+
+static inline bool ceph_mdsmap_is_laggy(struct ceph_mdsmap *m, int w)
+{
+	if (w >= 0 && w < m->m_max_mds)
+		return m->m_info[w].laggy;
+	return false;
+}
+
+extern int ceph_mdsmap_get_random_mds(struct ceph_mdsmap *m);
+extern struct ceph_mdsmap *ceph_mdsmap_decode(void **p, void *end);
+extern void ceph_mdsmap_destroy(struct ceph_mdsmap *m);
+
+#endif
diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h
new file mode 100644
index 00000000..3bff047f
--- /dev/null
+++ b/include/linux/ceph/messenger.h
@@ -0,0 +1,255 @@
+#ifndef __FS_CEPH_MESSENGER_H
+#define __FS_CEPH_MESSENGER_H
+
+#include <linux/kref.h>
+#include <linux/mutex.h>
+#include <linux/net.h>
+#include <linux/radix-tree.h>
+#include <linux/uio.h>
+#include <linux/workqueue.h>
+
+#include "types.h"
+#include "buffer.h"
+
+struct ceph_msg;
+struct ceph_connection;
+
+/*
+ * Ceph defines these callbacks for handling connection events.
+ */
+struct ceph_connection_operations {
+	struct ceph_connection *(*get)(struct ceph_connection *);
+	void (*put)(struct ceph_connection *);
+
+	/* handle an incoming message. */
+	void (*dispatch) (struct ceph_connection *con, struct ceph_msg *m);
+
+	/* authorize an outgoing connection */
+	int (*get_authorizer) (struct ceph_connection *con,
+			       void **buf, int *len, int *proto,
+			       void **reply_buf, int *reply_len, int force_new);
+	int (*verify_authorizer_reply) (struct ceph_connection *con, int len);
+	int (*invalidate_authorizer)(struct ceph_connection *con);
+
+	/* protocol version mismatch */
+	void (*bad_proto) (struct ceph_connection *con);
+
+	/* there was some error on the socket (disconnect, whatever) */
+	void (*fault) (struct ceph_connection *con);
+
+	/* a remote host as terminated a message exchange session, and messages
+	 * we sent (or they tried to send us) may be lost. */
+	void (*peer_reset) (struct ceph_connection *con);
+
+	struct ceph_msg * (*alloc_msg) (struct ceph_connection *con,
+					struct ceph_msg_header *hdr,
+					int *skip);
+};
+
+/* use format string %s%d */
+#define ENTITY_NAME(n) ceph_entity_type_name((n).type), le64_to_cpu((n).num)
+
+struct ceph_messenger {
+	struct ceph_entity_inst inst;    /* my name+address */
+	struct ceph_entity_addr my_enc_addr;
+
+	bool nocrc;
+
+	/*
+	 * the global_seq counts connections i (attempt to) initiate
+	 * in order to disambiguate certain connect race conditions.
+	 */
+	u32 global_seq;
+	spinlock_t global_seq_lock;
+
+	u32 supported_features;
+	u32 required_features;
+};
+
+/*
+ * a single message.  it contains a header (src, dest, message type, etc.),
+ * footer (crc values, mainly), a "front" message body, and possibly a
+ * data payload (stored in some number of pages).
+ */
+struct ceph_msg {
+	struct ceph_msg_header hdr;	/* header */
+	struct ceph_msg_footer footer;	/* footer */
+	struct kvec front;              /* unaligned blobs of message */
+	struct ceph_buffer *middle;
+	struct page **pages;            /* data payload.  NOT OWNER. */
+	unsigned nr_pages;              /* size of page array */
+	unsigned page_alignment;        /* io offset in first page */
+	struct ceph_pagelist *pagelist; /* instead of pages */
+	struct list_head list_head;
+	struct kref kref;
+	struct bio  *bio;		/* instead of pages/pagelist */
+	struct bio  *bio_iter;		/* bio iterator */
+	int bio_seg;			/* current bio segment */
+	struct ceph_pagelist *trail;	/* the trailing part of the data */
+	bool front_is_vmalloc;
+	bool more_to_follow;
+	bool needs_out_seq;
+	int front_max;
+	unsigned long ack_stamp;        /* tx: when we were acked */
+
+	struct ceph_msgpool *pool;
+};
+
+struct ceph_msg_pos {
+	int page, page_pos;  /* which page; offset in page */
+	int data_pos;        /* offset in data payload */
+	bool did_page_crc;   /* true if we've calculated crc for current page */
+};
+
+/* ceph connection fault delay defaults, for exponential backoff */
+#define BASE_DELAY_INTERVAL	(HZ/2)
+#define MAX_DELAY_INTERVAL	(5 * 60 * HZ)
+
+/*
+ * ceph_connection state bit flags
+ */
+#define LOSSYTX         0  /* we can close channel or drop messages on errors */
+#define CONNECTING	1
+#define NEGOTIATING	2
+#define KEEPALIVE_PENDING      3
+#define WRITE_PENDING	4  /* we have data ready to send */
+#define STANDBY		8  /* no outgoing messages, socket closed.  we keep
+			    * the ceph_connection around to maintain shared
+			    * state with the peer. */
+#define CLOSED		10 /* we've closed the connection */
+#define SOCK_CLOSED	11 /* socket state changed to closed */
+#define OPENING         13 /* open connection w/ (possibly new) peer */
+#define DEAD            14 /* dead, about to kfree */
+#define BACKOFF         15
+
+/*
+ * A single connection with another host.
+ *
+ * We maintain a queue of outgoing messages, and some session state to
+ * ensure that we can preserve the lossless, ordered delivery of
+ * messages in the case of a TCP disconnect.
+ */
+struct ceph_connection {
+	void *private;
+	atomic_t nref;
+
+	const struct ceph_connection_operations *ops;
+
+	struct ceph_messenger *msgr;
+	struct socket *sock;
+	unsigned long state;	/* connection state (see flags above) */
+	const char *error_msg;  /* error message, if any */
+
+	struct ceph_entity_addr peer_addr; /* peer address */
+	struct ceph_entity_name peer_name; /* peer name */
+	struct ceph_entity_addr peer_addr_for_me;
+	unsigned peer_features;
+	u32 connect_seq;      /* identify the most recent connection
+				 attempt for this connection, client */
+	u32 peer_global_seq;  /* peer's global seq for this connection */
+
+	int auth_retry;       /* true if we need a newer authorizer */
+	void *auth_reply_buf;   /* where to put the authorizer reply */
+	int auth_reply_buf_len;
+
+	struct mutex mutex;
+
+	/* out queue */
+	struct list_head out_queue;
+	struct list_head out_sent;   /* sending or sent but unacked */
+	u64 out_seq;		     /* last message queued for send */
+
+	u64 in_seq, in_seq_acked;  /* last message received, acked */
+
+	/* connection negotiation temps */
+	char in_banner[CEPH_BANNER_MAX_LEN];
+	union {
+		struct {  /* outgoing connection */
+			struct ceph_msg_connect out_connect;
+			struct ceph_msg_connect_reply in_reply;
+		};
+		struct {  /* incoming */
+			struct ceph_msg_connect in_connect;
+			struct ceph_msg_connect_reply out_reply;
+		};
+	};
+	struct ceph_entity_addr actual_peer_addr;
+
+	/* message out temps */
+	struct ceph_msg *out_msg;        /* sending message (== tail of
+					    out_sent) */
+	bool out_msg_done;
+	struct ceph_msg_pos out_msg_pos;
+
+	struct kvec out_kvec[8],         /* sending header/footer data */
+		*out_kvec_cur;
+	int out_kvec_left;   /* kvec's left in out_kvec */
+	int out_skip;        /* skip this many bytes */
+	int out_kvec_bytes;  /* total bytes left */
+	bool out_kvec_is_msg; /* kvec refers to out_msg */
+	int out_more;        /* there is more data after the kvecs */
+	__le64 out_temp_ack; /* for writing an ack */
+
+	/* message in temps */
+	struct ceph_msg_header in_hdr;
+	struct ceph_msg *in_msg;
+	struct ceph_msg_pos in_msg_pos;
+	u32 in_front_crc, in_middle_crc, in_data_crc;  /* calculated crc */
+
+	char in_tag;         /* protocol control byte */
+	int in_base_pos;     /* bytes read */
+	__le64 in_temp_ack;  /* for reading an ack */
+
+	struct delayed_work work;	    /* send|recv work */
+	unsigned long       delay;          /* current delay interval */
+};
+
+
+extern const char *ceph_pr_addr(const struct sockaddr_storage *ss);
+extern int ceph_parse_ips(const char *c, const char *end,
+			  struct ceph_entity_addr *addr,
+			  int max_count, int *count);
+
+
+extern int ceph_msgr_init(void);
+extern void ceph_msgr_exit(void);
+extern void ceph_msgr_flush(void);
+
+extern struct ceph_messenger *ceph_messenger_create(
+	struct ceph_entity_addr *myaddr,
+	u32 features, u32 required);
+extern void ceph_messenger_destroy(struct ceph_messenger *);
+
+extern void ceph_con_init(struct ceph_messenger *msgr,
+			  struct ceph_connection *con);
+extern void ceph_con_open(struct ceph_connection *con,
+			  struct ceph_entity_addr *addr);
+extern bool ceph_con_opened(struct ceph_connection *con);
+extern void ceph_con_close(struct ceph_connection *con);
+extern void ceph_con_send(struct ceph_connection *con, struct ceph_msg *msg);
+extern void ceph_con_revoke(struct ceph_connection *con, struct ceph_msg *msg);
+extern void ceph_con_revoke_message(struct ceph_connection *con,
+				  struct ceph_msg *msg);
+extern void ceph_con_keepalive(struct ceph_connection *con);
+extern struct ceph_connection *ceph_con_get(struct ceph_connection *con);
+extern void ceph_con_put(struct ceph_connection *con);
+
+extern struct ceph_msg *ceph_msg_new(int type, int front_len, gfp_t flags,
+				     bool can_fail);
+extern void ceph_msg_kfree(struct ceph_msg *m);
+
+
+static inline struct ceph_msg *ceph_msg_get(struct ceph_msg *msg)
+{
+	kref_get(&msg->kref);
+	return msg;
+}
+extern void ceph_msg_last_put(struct kref *kref);
+static inline void ceph_msg_put(struct ceph_msg *msg)
+{
+	kref_put(&msg->kref, ceph_msg_last_put);
+}
+
+extern void ceph_msg_dump(struct ceph_msg *msg);
+
+#endif
diff --git a/include/linux/ceph/mon_client.h b/include/linux/ceph/mon_client.h
new file mode 100644
index 00000000..545f8591
--- /dev/null
+++ b/include/linux/ceph/mon_client.h
@@ -0,0 +1,122 @@
+#ifndef _FS_CEPH_MON_CLIENT_H
+#define _FS_CEPH_MON_CLIENT_H
+
+#include <linux/completion.h>
+#include <linux/kref.h>
+#include <linux/rbtree.h>
+
+#include "messenger.h"
+
+struct ceph_client;
+struct ceph_mount_args;
+struct ceph_auth_client;
+
+/*
+ * The monitor map enumerates the set of all monitors.
+ */
+struct ceph_monmap {
+	struct ceph_fsid fsid;
+	u32 epoch;
+	u32 num_mon;
+	struct ceph_entity_inst mon_inst[0];
+};
+
+struct ceph_mon_client;
+struct ceph_mon_generic_request;
+
+
+/*
+ * Generic mechanism for resending monitor requests.
+ */
+typedef void (*ceph_monc_request_func_t)(struct ceph_mon_client *monc,
+					 int newmon);
+
+/* a pending monitor request */
+struct ceph_mon_request {
+	struct ceph_mon_client *monc;
+	struct delayed_work delayed_work;
+	unsigned long delay;
+	ceph_monc_request_func_t do_request;
+};
+
+/*
+ * ceph_mon_generic_request is being used for the statfs and poolop requests
+ * which are bening done a bit differently because we need to get data back
+ * to the caller
+ */
+struct ceph_mon_generic_request {
+	struct kref kref;
+	u64 tid;
+	struct rb_node node;
+	int result;
+	void *buf;
+	int buf_len;
+	struct completion completion;
+	struct ceph_msg *request;  /* original request */
+	struct ceph_msg *reply;    /* and reply */
+};
+
+struct ceph_mon_client {
+	struct ceph_client *client;
+	struct ceph_monmap *monmap;
+
+	struct mutex mutex;
+	struct delayed_work delayed_work;
+
+	struct ceph_auth_client *auth;
+	struct ceph_msg *m_auth, *m_auth_reply, *m_subscribe, *m_subscribe_ack;
+	int pending_auth;
+
+	bool hunting;
+	int cur_mon;                       /* last monitor i contacted */
+	unsigned long sub_sent, sub_renew_after;
+	struct ceph_connection *con;
+	bool have_fsid;
+
+	/* pending generic requests */
+	struct rb_root generic_request_tree;
+	int num_generic_requests;
+	u64 last_tid;
+
+	/* mds/osd map */
+	int want_mdsmap;
+	int want_next_osdmap; /* 1 = want, 2 = want+asked */
+	u32 have_osdmap, have_mdsmap;
+
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *debugfs_file;
+#endif
+};
+
+extern struct ceph_monmap *ceph_monmap_decode(void *p, void *end);
+extern int ceph_monmap_contains(struct ceph_monmap *m,
+				struct ceph_entity_addr *addr);
+
+extern int ceph_monc_init(struct ceph_mon_client *monc, struct ceph_client *cl);
+extern void ceph_monc_stop(struct ceph_mon_client *monc);
+
+/*
+ * The model here is to indicate that we need a new map of at least
+ * epoch @want, and also call in when we receive a map.  We will
+ * periodically rerequest the map from the monitor cluster until we
+ * get what we want.
+ */
+extern int ceph_monc_got_mdsmap(struct ceph_mon_client *monc, u32 have);
+extern int ceph_monc_got_osdmap(struct ceph_mon_client *monc, u32 have);
+
+extern void ceph_monc_request_next_osdmap(struct ceph_mon_client *monc);
+
+extern int ceph_monc_do_statfs(struct ceph_mon_client *monc,
+			       struct ceph_statfs *buf);
+
+extern int ceph_monc_open_session(struct ceph_mon_client *monc);
+
+extern int ceph_monc_validate_auth(struct ceph_mon_client *monc);
+
+extern int ceph_monc_create_snapid(struct ceph_mon_client *monc,
+				   u32 pool, u64 *snapid);
+
+extern int ceph_monc_delete_snapid(struct ceph_mon_client *monc,
+				   u32 pool, u64 snapid);
+
+#endif
diff --git a/include/linux/ceph/msgpool.h b/include/linux/ceph/msgpool.h
new file mode 100644
index 00000000..a362605f
--- /dev/null
+++ b/include/linux/ceph/msgpool.h
@@ -0,0 +1,25 @@
+#ifndef _FS_CEPH_MSGPOOL
+#define _FS_CEPH_MSGPOOL
+
+#include <linux/mempool.h>
+#include "messenger.h"
+
+/*
+ * we use memory pools for preallocating messages we may receive, to
+ * avoid unexpected OOM conditions.
+ */
+struct ceph_msgpool {
+	const char *name;
+	mempool_t *pool;
+	int front_len;          /* preallocated payload size */
+};
+
+extern int ceph_msgpool_init(struct ceph_msgpool *pool,
+			     int front_len, int size, bool blocking,
+			     const char *name);
+extern void ceph_msgpool_destroy(struct ceph_msgpool *pool);
+extern struct ceph_msg *ceph_msgpool_get(struct ceph_msgpool *,
+					 int front_len);
+extern void ceph_msgpool_put(struct ceph_msgpool *, struct ceph_msg *);
+
+#endif
diff --git a/include/linux/ceph/msgr.h b/include/linux/ceph/msgr.h
new file mode 100644
index 00000000..680d3d64
--- /dev/null
+++ b/include/linux/ceph/msgr.h
@@ -0,0 +1,175 @@
+#ifndef CEPH_MSGR_H
+#define CEPH_MSGR_H
+
+/*
+ * Data types for message passing layer used by Ceph.
+ */
+
+#define CEPH_MON_PORT    6789  /* default monitor port */
+
+/*
+ * client-side processes will try to bind to ports in this
+ * range, simply for the benefit of tools like nmap or wireshark
+ * that would like to identify the protocol.
+ */
+#define CEPH_PORT_FIRST  6789
+#define CEPH_PORT_START  6800  /* non-monitors start here */
+#define CEPH_PORT_LAST   6900
+
+/*
+ * tcp connection banner.  include a protocol version. and adjust
+ * whenever the wire protocol changes.  try to keep this string length
+ * constant.
+ */
+#define CEPH_BANNER "ceph v027"
+#define CEPH_BANNER_MAX_LEN 30
+
+
+/*
+ * Rollover-safe type and comparator for 32-bit sequence numbers.
+ * Comparator returns -1, 0, or 1.
+ */
+typedef __u32 ceph_seq_t;
+
+static inline __s32 ceph_seq_cmp(__u32 a, __u32 b)
+{
+       return (__s32)a - (__s32)b;
+}
+
+
+/*
+ * entity_name -- logical name for a process participating in the
+ * network, e.g. 'mds0' or 'osd3'.
+ */
+struct ceph_entity_name {
+	__u8 type;      /* CEPH_ENTITY_TYPE_* */
+	__le64 num;
+} __attribute__ ((packed));
+
+#define CEPH_ENTITY_TYPE_MON    0x01
+#define CEPH_ENTITY_TYPE_MDS    0x02
+#define CEPH_ENTITY_TYPE_OSD    0x04
+#define CEPH_ENTITY_TYPE_CLIENT 0x08
+#define CEPH_ENTITY_TYPE_AUTH   0x20
+
+#define CEPH_ENTITY_TYPE_ANY    0xFF
+
+extern const char *ceph_entity_type_name(int type);
+
+/*
+ * entity_addr -- network address
+ */
+struct ceph_entity_addr {
+	__le32 type;
+	__le32 nonce;  /* unique id for process (e.g. pid) */
+	struct sockaddr_storage in_addr;
+} __attribute__ ((packed));
+
+struct ceph_entity_inst {
+	struct ceph_entity_name name;
+	struct ceph_entity_addr addr;
+} __attribute__ ((packed));
+
+
+/* used by message exchange protocol */
+#define CEPH_MSGR_TAG_READY         1  /* server->client: ready for messages */
+#define CEPH_MSGR_TAG_RESETSESSION  2  /* server->client: reset, try again */
+#define CEPH_MSGR_TAG_WAIT          3  /* server->client: wait for racing
+					  incoming connection */
+#define CEPH_MSGR_TAG_RETRY_SESSION 4  /* server->client + cseq: try again
+					  with higher cseq */
+#define CEPH_MSGR_TAG_RETRY_GLOBAL  5  /* server->client + gseq: try again
+					  with higher gseq */
+#define CEPH_MSGR_TAG_CLOSE         6  /* closing pipe */
+#define CEPH_MSGR_TAG_MSG           7  /* message */
+#define CEPH_MSGR_TAG_ACK           8  /* message ack */
+#define CEPH_MSGR_TAG_KEEPALIVE     9  /* just a keepalive byte! */
+#define CEPH_MSGR_TAG_BADPROTOVER  10  /* bad protocol version */
+#define CEPH_MSGR_TAG_BADAUTHORIZER 11 /* bad authorizer */
+#define CEPH_MSGR_TAG_FEATURES      12 /* insufficient features */
+
+
+/*
+ * connection negotiation
+ */
+struct ceph_msg_connect {
+	__le64 features;     /* supported feature bits */
+	__le32 host_type;    /* CEPH_ENTITY_TYPE_* */
+	__le32 global_seq;   /* count connections initiated by this host */
+	__le32 connect_seq;  /* count connections initiated in this session */
+	__le32 protocol_version;
+	__le32 authorizer_protocol;
+	__le32 authorizer_len;
+	__u8  flags;         /* CEPH_MSG_CONNECT_* */
+} __attribute__ ((packed));
+
+struct ceph_msg_connect_reply {
+	__u8 tag;
+	__le64 features;     /* feature bits for this session */
+	__le32 global_seq;
+	__le32 connect_seq;
+	__le32 protocol_version;
+	__le32 authorizer_len;
+	__u8 flags;
+} __attribute__ ((packed));
+
+#define CEPH_MSG_CONNECT_LOSSY  1  /* messages i send may be safely dropped */
+
+
+/*
+ * message header
+ */
+struct ceph_msg_header_old {
+	__le64 seq;       /* message seq# for this session */
+	__le64 tid;       /* transaction id */
+	__le16 type;      /* message type */
+	__le16 priority;  /* priority.  higher value == higher priority */
+	__le16 version;   /* version of message encoding */
+
+	__le32 front_len; /* bytes in main payload */
+	__le32 middle_len;/* bytes in middle payload */
+	__le32 data_len;  /* bytes of data payload */
+	__le16 data_off;  /* sender: include full offset;
+			     receiver: mask against ~PAGE_MASK */
+
+	struct ceph_entity_inst src, orig_src;
+	__le32 reserved;
+	__le32 crc;       /* header crc32c */
+} __attribute__ ((packed));
+
+struct ceph_msg_header {
+	__le64 seq;       /* message seq# for this session */
+	__le64 tid;       /* transaction id */
+	__le16 type;      /* message type */
+	__le16 priority;  /* priority.  higher value == higher priority */
+	__le16 version;   /* version of message encoding */
+
+	__le32 front_len; /* bytes in main payload */
+	__le32 middle_len;/* bytes in middle payload */
+	__le32 data_len;  /* bytes of data payload */
+	__le16 data_off;  /* sender: include full offset;
+			     receiver: mask against ~PAGE_MASK */
+
+	struct ceph_entity_name src;
+	__le32 reserved;
+	__le32 crc;       /* header crc32c */
+} __attribute__ ((packed));
+
+#define CEPH_MSG_PRIO_LOW     64
+#define CEPH_MSG_PRIO_DEFAULT 127
+#define CEPH_MSG_PRIO_HIGH    196
+#define CEPH_MSG_PRIO_HIGHEST 255
+
+/*
+ * follows data payload
+ */
+struct ceph_msg_footer {
+	__le32 front_crc, middle_crc, data_crc;
+	__u8 flags;
+} __attribute__ ((packed));
+
+#define CEPH_MSG_FOOTER_COMPLETE  (1<<0)   /* msg wasn't aborted */
+#define CEPH_MSG_FOOTER_NOCRC     (1<<1)   /* no data crc */
+
+
+#endif
diff --git a/include/linux/ceph/osd_client.h b/include/linux/ceph/osd_client.h
new file mode 100644
index 00000000..7c05ac20
--- /dev/null
+++ b/include/linux/ceph/osd_client.h
@@ -0,0 +1,296 @@
+#ifndef _FS_CEPH_OSD_CLIENT_H
+#define _FS_CEPH_OSD_CLIENT_H
+
+#include <linux/completion.h>
+#include <linux/kref.h>
+#include <linux/mempool.h>
+#include <linux/rbtree.h>
+
+#include "types.h"
+#include "osdmap.h"
+#include "messenger.h"
+
+/* 
+ * Maximum object name size 
+ * (must be at least as big as RBD_MAX_MD_NAME_LEN -- currently 100) 
+ */
+#define MAX_OBJ_NAME_SIZE 100
+
+struct ceph_msg;
+struct ceph_snap_context;
+struct ceph_osd_request;
+struct ceph_osd_client;
+struct ceph_authorizer;
+struct ceph_pagelist;
+
+/*
+ * completion callback for async writepages
+ */
+typedef void (*ceph_osdc_callback_t)(struct ceph_osd_request *,
+				     struct ceph_msg *);
+
+/* a given osd we're communicating with */
+struct ceph_osd {
+	atomic_t o_ref;
+	struct ceph_osd_client *o_osdc;
+	int o_osd;
+	int o_incarnation;
+	struct rb_node o_node;
+	struct ceph_connection o_con;
+	struct list_head o_requests;
+	struct list_head o_linger_requests;
+	struct list_head o_osd_lru;
+	struct ceph_authorizer *o_authorizer;
+	void *o_authorizer_buf, *o_authorizer_reply_buf;
+	size_t o_authorizer_buf_len, o_authorizer_reply_buf_len;
+	unsigned long lru_ttl;
+	int o_marked_for_keepalive;
+	struct list_head o_keepalive_item;
+};
+
+/* an in-flight request */
+struct ceph_osd_request {
+	u64             r_tid;              /* unique for this client */
+	struct rb_node  r_node;
+	struct list_head r_req_lru_item;
+	struct list_head r_osd_item;
+	struct list_head r_linger_item;
+	struct list_head r_linger_osd;
+	struct ceph_osd *r_osd;
+	struct ceph_pg   r_pgid;
+	int              r_pg_osds[CEPH_PG_MAX_SIZE];
+	int              r_num_pg_osds;
+
+	struct ceph_connection *r_con_filling_msg;
+
+	struct ceph_msg  *r_request, *r_reply;
+	int               r_result;
+	int               r_flags;     /* any additional flags for the osd */
+	u32               r_sent;      /* >0 if r_request is sending/sent */
+	int               r_got_reply;
+	int		  r_linger;
+
+	struct ceph_osd_client *r_osdc;
+	struct kref       r_kref;
+	bool              r_mempool;
+	struct completion r_completion, r_safe_completion;
+	ceph_osdc_callback_t r_callback, r_safe_callback;
+	struct ceph_eversion r_reassert_version;
+	struct list_head  r_unsafe_item;
+
+	struct inode *r_inode;         	      /* for use by callbacks */
+	void *r_priv;			      /* ditto */
+
+	char              r_oid[MAX_OBJ_NAME_SIZE];          /* object name */
+	int               r_oid_len;
+	unsigned long     r_stamp;            /* send OR check time */
+
+	struct ceph_file_layout r_file_layout;
+	struct ceph_snap_context *r_snapc;    /* snap context for writes */
+	unsigned          r_num_pages;        /* size of page array (follows) */
+	unsigned          r_page_alignment;   /* io offset in first page */
+	struct page     **r_pages;            /* pages for data payload */
+	int               r_pages_from_pool;
+	int               r_own_pages;        /* if true, i own page list */
+#ifdef CONFIG_BLOCK
+	struct bio       *r_bio;	      /* instead of pages */
+#endif
+
+	struct ceph_pagelist *r_trail;	      /* trailing part of the data */
+};
+
+struct ceph_osd_event {
+	u64 cookie;
+	int one_shot;
+	struct ceph_osd_client *osdc;
+	void (*cb)(u64, u64, u8, void *);
+	void *data;
+	struct rb_node node;
+	struct list_head osd_node;
+	struct kref kref;
+	struct completion completion;
+};
+
+struct ceph_osd_event_work {
+	struct work_struct work;
+	struct ceph_osd_event *event;
+        u64 ver;
+        u64 notify_id;
+        u8 opcode;
+};
+
+struct ceph_osd_client {
+	struct ceph_client     *client;
+
+	struct ceph_osdmap     *osdmap;       /* current map */
+	struct rw_semaphore    map_sem;
+	struct completion      map_waiters;
+	u64                    last_requested_map;
+
+	struct mutex           request_mutex;
+	struct rb_root         osds;          /* osds */
+	struct list_head       osd_lru;       /* idle osds */
+	u64                    timeout_tid;   /* tid of timeout triggering rq */
+	u64                    last_tid;      /* tid of last request */
+	struct rb_root         requests;      /* pending requests */
+	struct list_head       req_lru;	      /* in-flight lru */
+	struct list_head       req_unsent;    /* unsent/need-resend queue */
+	struct list_head       req_notarget;  /* map to no osd */
+	struct list_head       req_linger;    /* lingering requests */
+	int                    num_requests;
+	struct delayed_work    timeout_work;
+	struct delayed_work    osds_timeout_work;
+#ifdef CONFIG_DEBUG_FS
+	struct dentry 	       *debugfs_file;
+#endif
+
+	mempool_t              *req_mempool;
+
+	struct ceph_msgpool	msgpool_op;
+	struct ceph_msgpool	msgpool_op_reply;
+
+	spinlock_t		event_lock;
+	struct rb_root		event_tree;
+	u64			event_count;
+
+	struct workqueue_struct	*notify_wq;
+};
+
+struct ceph_osd_req_op {
+	u16 op;           /* CEPH_OSD_OP_* */
+	u32 flags;        /* CEPH_OSD_FLAG_* */
+	union {
+		struct {
+			u64 offset, length;
+			u64 truncate_size;
+			u32 truncate_seq;
+		} extent;
+		struct {
+			const char *name;
+			u32 name_len;
+			const char  *val;
+			u32 value_len;
+			__u8 cmp_op;       /* CEPH_OSD_CMPXATTR_OP_* */
+			__u8 cmp_mode;     /* CEPH_OSD_CMPXATTR_MODE_* */
+		} xattr;
+		struct {
+			const char *class_name;
+			__u8 class_len;
+			const char *method_name;
+			__u8 method_len;
+			__u8 argc;
+			const char *indata;
+			u32 indata_len;
+		} cls;
+		struct {
+			u64 cookie, count;
+		} pgls;
+	        struct {
+		        u64 snapid;
+	        } snap;
+		struct {
+			u64 cookie;
+			u64 ver;
+			__u8 flag;
+			u32 prot_ver;
+			u32 timeout;
+		} watch;
+	};
+	u32 payload_len;
+};
+
+extern int ceph_osdc_init(struct ceph_osd_client *osdc,
+			  struct ceph_client *client);
+extern void ceph_osdc_stop(struct ceph_osd_client *osdc);
+
+extern void ceph_osdc_handle_reply(struct ceph_osd_client *osdc,
+				   struct ceph_msg *msg);
+extern void ceph_osdc_handle_map(struct ceph_osd_client *osdc,
+				 struct ceph_msg *msg);
+
+extern void ceph_calc_raw_layout(struct ceph_osd_client *osdc,
+			struct ceph_file_layout *layout,
+			u64 snapid,
+			u64 off, u64 *plen, u64 *bno,
+			struct ceph_osd_request *req,
+			struct ceph_osd_req_op *op);
+
+extern struct ceph_osd_request *ceph_osdc_alloc_request(struct ceph_osd_client *osdc,
+					       int flags,
+					       struct ceph_snap_context *snapc,
+					       struct ceph_osd_req_op *ops,
+					       bool use_mempool,
+					       gfp_t gfp_flags,
+					       struct page **pages,
+					       struct bio *bio);
+
+extern void ceph_osdc_build_request(struct ceph_osd_request *req,
+				    u64 off, u64 *plen,
+				    struct ceph_osd_req_op *src_ops,
+				    struct ceph_snap_context *snapc,
+				    struct timespec *mtime,
+				    const char *oid,
+				    int oid_len);
+
+extern struct ceph_osd_request *ceph_osdc_new_request(struct ceph_osd_client *,
+				      struct ceph_file_layout *layout,
+				      struct ceph_vino vino,
+				      u64 offset, u64 *len, int op, int flags,
+				      struct ceph_snap_context *snapc,
+				      int do_sync, u32 truncate_seq,
+				      u64 truncate_size,
+				      struct timespec *mtime,
+				      bool use_mempool, int num_reply,
+				      int page_align);
+
+extern void ceph_osdc_set_request_linger(struct ceph_osd_client *osdc,
+					 struct ceph_osd_request *req);
+extern void ceph_osdc_unregister_linger_request(struct ceph_osd_client *osdc,
+						struct ceph_osd_request *req);
+
+static inline void ceph_osdc_get_request(struct ceph_osd_request *req)
+{
+	kref_get(&req->r_kref);
+}
+extern void ceph_osdc_release_request(struct kref *kref);
+static inline void ceph_osdc_put_request(struct ceph_osd_request *req)
+{
+	kref_put(&req->r_kref, ceph_osdc_release_request);
+}
+
+extern int ceph_osdc_start_request(struct ceph_osd_client *osdc,
+				   struct ceph_osd_request *req,
+				   bool nofail);
+extern int ceph_osdc_wait_request(struct ceph_osd_client *osdc,
+				  struct ceph_osd_request *req);
+extern void ceph_osdc_sync(struct ceph_osd_client *osdc);
+
+extern int ceph_osdc_readpages(struct ceph_osd_client *osdc,
+			       struct ceph_vino vino,
+			       struct ceph_file_layout *layout,
+			       u64 off, u64 *plen,
+			       u32 truncate_seq, u64 truncate_size,
+			       struct page **pages, int nr_pages,
+			       int page_align);
+
+extern int ceph_osdc_writepages(struct ceph_osd_client *osdc,
+				struct ceph_vino vino,
+				struct ceph_file_layout *layout,
+				struct ceph_snap_context *sc,
+				u64 off, u64 len,
+				u32 truncate_seq, u64 truncate_size,
+				struct timespec *mtime,
+				struct page **pages, int nr_pages,
+				int flags, int do_sync, bool nofail);
+
+/* watch/notify events */
+extern int ceph_osdc_create_event(struct ceph_osd_client *osdc,
+				  void (*event_cb)(u64, u64, u8, void *),
+				  int one_shot, void *data,
+				  struct ceph_osd_event **pevent);
+extern void ceph_osdc_cancel_event(struct ceph_osd_event *event);
+extern int ceph_osdc_wait_event(struct ceph_osd_event *event,
+				unsigned long timeout);
+extern void ceph_osdc_put_event(struct ceph_osd_event *event);
+#endif
+
diff --git a/include/linux/ceph/osdmap.h b/include/linux/ceph/osdmap.h
new file mode 100644
index 00000000..ba4c205c
--- /dev/null
+++ b/include/linux/ceph/osdmap.h
@@ -0,0 +1,130 @@
+#ifndef _FS_CEPH_OSDMAP_H
+#define _FS_CEPH_OSDMAP_H
+
+#include <linux/rbtree.h>
+#include "types.h"
+#include "ceph_fs.h"
+#include <linux/crush/crush.h>
+
+/*
+ * The osd map describes the current membership of the osd cluster and
+ * specifies the mapping of objects to placement groups and placement
+ * groups to (sets of) osds.  That is, it completely specifies the
+ * (desired) distribution of all data objects in the system at some
+ * point in time.
+ *
+ * Each map version is identified by an epoch, which increases monotonically.
+ *
+ * The map can be updated either via an incremental map (diff) describing
+ * the change between two successive epochs, or as a fully encoded map.
+ */
+struct ceph_pg_pool_info {
+	struct rb_node node;
+	int id;
+	struct ceph_pg_pool v;
+	int pg_num_mask, pgp_num_mask, lpg_num_mask, lpgp_num_mask;
+	char *name;
+};
+
+struct ceph_pg_mapping {
+	struct rb_node node;
+	struct ceph_pg pgid;
+	int len;
+	int osds[];
+};
+
+struct ceph_osdmap {
+	struct ceph_fsid fsid;
+	u32 epoch;
+	u32 mkfs_epoch;
+	struct ceph_timespec created, modified;
+
+	u32 flags;         /* CEPH_OSDMAP_* */
+
+	u32 max_osd;       /* size of osd_state, _offload, _addr arrays */
+	u8 *osd_state;     /* CEPH_OSD_* */
+	u32 *osd_weight;   /* 0 = failed, 0x10000 = 100% normal */
+	struct ceph_entity_addr *osd_addr;
+
+	struct rb_root pg_temp;
+	struct rb_root pg_pools;
+	u32 pool_max;
+
+	/* the CRUSH map specifies the mapping of placement groups to
+	 * the list of osds that store+replicate them. */
+	struct crush_map *crush;
+};
+
+/*
+ * file layout helpers
+ */
+#define ceph_file_layout_su(l) ((__s32)le32_to_cpu((l).fl_stripe_unit))
+#define ceph_file_layout_stripe_count(l) \
+	((__s32)le32_to_cpu((l).fl_stripe_count))
+#define ceph_file_layout_object_size(l) ((__s32)le32_to_cpu((l).fl_object_size))
+#define ceph_file_layout_cas_hash(l) ((__s32)le32_to_cpu((l).fl_cas_hash))
+#define ceph_file_layout_object_su(l) \
+	((__s32)le32_to_cpu((l).fl_object_stripe_unit))
+#define ceph_file_layout_pg_preferred(l) \
+	((__s32)le32_to_cpu((l).fl_pg_preferred))
+#define ceph_file_layout_pg_pool(l) \
+	((__s32)le32_to_cpu((l).fl_pg_pool))
+
+static inline unsigned ceph_file_layout_stripe_width(struct ceph_file_layout *l)
+{
+	return le32_to_cpu(l->fl_stripe_unit) *
+		le32_to_cpu(l->fl_stripe_count);
+}
+
+/* "period" == bytes before i start on a new set of objects */
+static inline unsigned ceph_file_layout_period(struct ceph_file_layout *l)
+{
+	return le32_to_cpu(l->fl_object_size) *
+		le32_to_cpu(l->fl_stripe_count);
+}
+
+
+static inline int ceph_osd_is_up(struct ceph_osdmap *map, int osd)
+{
+	return (osd < map->max_osd) && (map->osd_state[osd] & CEPH_OSD_UP);
+}
+
+static inline bool ceph_osdmap_flag(struct ceph_osdmap *map, int flag)
+{
+	return map && (map->flags & flag);
+}
+
+extern char *ceph_osdmap_state_str(char *str, int len, int state);
+
+static inline struct ceph_entity_addr *ceph_osd_addr(struct ceph_osdmap *map,
+						     int osd)
+{
+	if (osd >= map->max_osd)
+		return NULL;
+	return &map->osd_addr[osd];
+}
+
+extern struct ceph_osdmap *osdmap_decode(void **p, void *end);
+extern struct ceph_osdmap *osdmap_apply_incremental(void **p, void *end,
+					    struct ceph_osdmap *map,
+					    struct ceph_messenger *msgr);
+extern void ceph_osdmap_destroy(struct ceph_osdmap *map);
+
+/* calculate mapping of a file extent to an object */
+extern void ceph_calc_file_object_mapping(struct ceph_file_layout *layout,
+					  u64 off, u64 *plen,
+					  u64 *bno, u64 *oxoff, u64 *oxlen);
+
+/* calculate mapping of object to a placement group */
+extern int ceph_calc_object_layout(struct ceph_object_layout *ol,
+				   const char *oid,
+				   struct ceph_file_layout *fl,
+				   struct ceph_osdmap *osdmap);
+extern int ceph_calc_pg_acting(struct ceph_osdmap *osdmap, struct ceph_pg pgid,
+			       int *acting);
+extern int ceph_calc_pg_primary(struct ceph_osdmap *osdmap,
+				struct ceph_pg pgid);
+
+extern int ceph_pg_poolid_by_name(struct ceph_osdmap *map, const char *name);
+
+#endif
diff --git a/include/linux/ceph/pagelist.h b/include/linux/ceph/pagelist.h
new file mode 100644
index 00000000..9660d6b0
--- /dev/null
+++ b/include/linux/ceph/pagelist.h
@@ -0,0 +1,75 @@
+#ifndef __FS_CEPH_PAGELIST_H
+#define __FS_CEPH_PAGELIST_H
+
+#include <linux/list.h>
+
+struct ceph_pagelist {
+	struct list_head head;
+	void *mapped_tail;
+	size_t length;
+	size_t room;
+	struct list_head free_list;
+	size_t num_pages_free;
+};
+
+struct ceph_pagelist_cursor {
+	struct ceph_pagelist *pl;   /* pagelist, for error checking */
+	struct list_head *page_lru; /* page in list */
+	size_t room;		    /* room remaining to reset to */
+};
+
+static inline void ceph_pagelist_init(struct ceph_pagelist *pl)
+{
+	INIT_LIST_HEAD(&pl->head);
+	pl->mapped_tail = NULL;
+	pl->length = 0;
+	pl->room = 0;
+	INIT_LIST_HEAD(&pl->free_list);
+	pl->num_pages_free = 0;
+}
+
+extern int ceph_pagelist_release(struct ceph_pagelist *pl);
+
+extern int ceph_pagelist_append(struct ceph_pagelist *pl, const void *d, size_t l);
+
+extern int ceph_pagelist_reserve(struct ceph_pagelist *pl, size_t space);
+
+extern int ceph_pagelist_free_reserve(struct ceph_pagelist *pl);
+
+extern void ceph_pagelist_set_cursor(struct ceph_pagelist *pl,
+				     struct ceph_pagelist_cursor *c);
+
+extern int ceph_pagelist_truncate(struct ceph_pagelist *pl,
+				  struct ceph_pagelist_cursor *c);
+
+static inline int ceph_pagelist_encode_64(struct ceph_pagelist *pl, u64 v)
+{
+	__le64 ev = cpu_to_le64(v);
+	return ceph_pagelist_append(pl, &ev, sizeof(ev));
+}
+static inline int ceph_pagelist_encode_32(struct ceph_pagelist *pl, u32 v)
+{
+	__le32 ev = cpu_to_le32(v);
+	return ceph_pagelist_append(pl, &ev, sizeof(ev));
+}
+static inline int ceph_pagelist_encode_16(struct ceph_pagelist *pl, u16 v)
+{
+	__le16 ev = cpu_to_le16(v);
+	return ceph_pagelist_append(pl, &ev, sizeof(ev));
+}
+static inline int ceph_pagelist_encode_8(struct ceph_pagelist *pl, u8 v)
+{
+	return ceph_pagelist_append(pl, &v, 1);
+}
+static inline int ceph_pagelist_encode_string(struct ceph_pagelist *pl,
+					      char *s, size_t len)
+{
+	int ret = ceph_pagelist_encode_32(pl, len);
+	if (ret)
+		return ret;
+	if (len)
+		return ceph_pagelist_append(pl, s, len);
+	return 0;
+}
+
+#endif
diff --git a/include/linux/ceph/rados.h b/include/linux/ceph/rados.h
new file mode 100644
index 00000000..0a990998
--- /dev/null
+++ b/include/linux/ceph/rados.h
@@ -0,0 +1,426 @@
+#ifndef CEPH_RADOS_H
+#define CEPH_RADOS_H
+
+/*
+ * Data types for the Ceph distributed object storage layer RADOS
+ * (Reliable Autonomic Distributed Object Store).
+ */
+
+#include "msgr.h"
+
+/*
+ * osdmap encoding versions
+ */
+#define CEPH_OSDMAP_INC_VERSION     5
+#define CEPH_OSDMAP_INC_VERSION_EXT 6
+#define CEPH_OSDMAP_VERSION         5
+#define CEPH_OSDMAP_VERSION_EXT     6
+
+/*
+ * fs id
+ */
+struct ceph_fsid {
+	unsigned char fsid[16];
+};
+
+static inline int ceph_fsid_compare(const struct ceph_fsid *a,
+				    const struct ceph_fsid *b)
+{
+	return memcmp(a, b, sizeof(*a));
+}
+
+/*
+ * ino, object, etc.
+ */
+typedef __le64 ceph_snapid_t;
+#define CEPH_SNAPDIR ((__u64)(-1))  /* reserved for hidden .snap dir */
+#define CEPH_NOSNAP  ((__u64)(-2))  /* "head", "live" revision */
+#define CEPH_MAXSNAP ((__u64)(-3))  /* largest valid snapid */
+
+struct ceph_timespec {
+	__le32 tv_sec;
+	__le32 tv_nsec;
+} __attribute__ ((packed));
+
+
+/*
+ * object layout - how objects are mapped into PGs
+ */
+#define CEPH_OBJECT_LAYOUT_HASH     1
+#define CEPH_OBJECT_LAYOUT_LINEAR   2
+#define CEPH_OBJECT_LAYOUT_HASHINO  3
+
+/*
+ * pg layout -- how PGs are mapped onto (sets of) OSDs
+ */
+#define CEPH_PG_LAYOUT_CRUSH  0
+#define CEPH_PG_LAYOUT_HASH   1
+#define CEPH_PG_LAYOUT_LINEAR 2
+#define CEPH_PG_LAYOUT_HYBRID 3
+
+#define CEPH_PG_MAX_SIZE      16  /* max # osds in a single pg */
+
+/*
+ * placement group.
+ * we encode this into one __le64.
+ */
+struct ceph_pg {
+	__le16 preferred; /* preferred primary osd */
+	__le16 ps;        /* placement seed */
+	__le32 pool;      /* object pool */
+} __attribute__ ((packed));
+
+/*
+ * pg_pool is a set of pgs storing a pool of objects
+ *
+ *  pg_num -- base number of pseudorandomly placed pgs
+ *
+ *  pgp_num -- effective number when calculating pg placement.  this
+ * is used for pg_num increases.  new pgs result in data being "split"
+ * into new pgs.  for this to proceed smoothly, new pgs are intiially
+ * colocated with their parents; that is, pgp_num doesn't increase
+ * until the new pgs have successfully split.  only _then_ are the new
+ * pgs placed independently.
+ *
+ *  lpg_num -- localized pg count (per device).  replicas are randomly
+ * selected.
+ *
+ *  lpgp_num -- as above.
+ */
+#define CEPH_PG_TYPE_REP     1
+#define CEPH_PG_TYPE_RAID4   2
+#define CEPH_PG_POOL_VERSION 2
+struct ceph_pg_pool {
+	__u8 type;                /* CEPH_PG_TYPE_* */
+	__u8 size;                /* number of osds in each pg */
+	__u8 crush_ruleset;       /* crush placement rule */
+	__u8 object_hash;         /* hash mapping object name to ps */
+	__le32 pg_num, pgp_num;   /* number of pg's */
+	__le32 lpg_num, lpgp_num; /* number of localized pg's */
+	__le32 last_change;       /* most recent epoch changed */
+	__le64 snap_seq;          /* seq for per-pool snapshot */
+	__le32 snap_epoch;        /* epoch of last snap */
+	__le32 num_snaps;
+	__le32 num_removed_snap_intervals; /* if non-empty, NO per-pool snaps */
+	__le64 auid;               /* who owns the pg */
+} __attribute__ ((packed));
+
+/*
+ * stable_mod func is used to control number of placement groups.
+ * similar to straight-up modulo, but produces a stable mapping as b
+ * increases over time.  b is the number of bins, and bmask is the
+ * containing power of 2 minus 1.
+ *
+ * b <= bmask and bmask=(2**n)-1
+ * e.g., b=12 -> bmask=15, b=123 -> bmask=127
+ */
+static inline int ceph_stable_mod(int x, int b, int bmask)
+{
+	if ((x & bmask) < b)
+		return x & bmask;
+	else
+		return x & (bmask >> 1);
+}
+
+/*
+ * object layout - how a given object should be stored.
+ */
+struct ceph_object_layout {
+	struct ceph_pg ol_pgid;   /* raw pg, with _full_ ps precision. */
+	__le32 ol_stripe_unit;    /* for per-object parity, if any */
+} __attribute__ ((packed));
+
+/*
+ * compound epoch+version, used by storage layer to serialize mutations
+ */
+struct ceph_eversion {
+	__le32 epoch;
+	__le64 version;
+} __attribute__ ((packed));
+
+/*
+ * osd map bits
+ */
+
+/* status bits */
+#define CEPH_OSD_EXISTS 1
+#define CEPH_OSD_UP     2
+
+/* osd weights.  fixed point value: 0x10000 == 1.0 ("in"), 0 == "out" */
+#define CEPH_OSD_IN  0x10000
+#define CEPH_OSD_OUT 0
+
+
+/*
+ * osd map flag bits
+ */
+#define CEPH_OSDMAP_NEARFULL (1<<0)  /* sync writes (near ENOSPC) */
+#define CEPH_OSDMAP_FULL     (1<<1)  /* no data writes (ENOSPC) */
+#define CEPH_OSDMAP_PAUSERD  (1<<2)  /* pause all reads */
+#define CEPH_OSDMAP_PAUSEWR  (1<<3)  /* pause all writes */
+#define CEPH_OSDMAP_PAUSEREC (1<<4)  /* pause recovery */
+
+/*
+ * osd ops
+ */
+#define CEPH_OSD_OP_MODE       0xf000
+#define CEPH_OSD_OP_MODE_RD    0x1000
+#define CEPH_OSD_OP_MODE_WR    0x2000
+#define CEPH_OSD_OP_MODE_RMW   0x3000
+#define CEPH_OSD_OP_MODE_SUB   0x4000
+
+#define CEPH_OSD_OP_TYPE       0x0f00
+#define CEPH_OSD_OP_TYPE_LOCK  0x0100
+#define CEPH_OSD_OP_TYPE_DATA  0x0200
+#define CEPH_OSD_OP_TYPE_ATTR  0x0300
+#define CEPH_OSD_OP_TYPE_EXEC  0x0400
+#define CEPH_OSD_OP_TYPE_PG    0x0500
+
+enum {
+	/** data **/
+	/* read */
+	CEPH_OSD_OP_READ      = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_DATA | 1,
+	CEPH_OSD_OP_STAT      = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_DATA | 2,
+	CEPH_OSD_OP_MAPEXT    = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_DATA | 3,
+
+	/* fancy read */
+	CEPH_OSD_OP_MASKTRUNC   = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_DATA | 4,
+	CEPH_OSD_OP_SPARSE_READ = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_DATA | 5,
+
+	CEPH_OSD_OP_NOTIFY    = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_DATA | 6,
+	CEPH_OSD_OP_NOTIFY_ACK = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_DATA | 7,
+
+	/* versioning */
+	CEPH_OSD_OP_ASSERT_VER = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_DATA | 8,
+
+	/* write */
+	CEPH_OSD_OP_WRITE     = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 1,
+	CEPH_OSD_OP_WRITEFULL = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 2,
+	CEPH_OSD_OP_TRUNCATE  = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 3,
+	CEPH_OSD_OP_ZERO      = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 4,
+	CEPH_OSD_OP_DELETE    = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 5,
+
+	/* fancy write */
+	CEPH_OSD_OP_APPEND    = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 6,
+	CEPH_OSD_OP_STARTSYNC = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 7,
+	CEPH_OSD_OP_SETTRUNC  = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 8,
+	CEPH_OSD_OP_TRIMTRUNC = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 9,
+
+	CEPH_OSD_OP_TMAPUP  = CEPH_OSD_OP_MODE_RMW | CEPH_OSD_OP_TYPE_DATA | 10,
+	CEPH_OSD_OP_TMAPPUT = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 11,
+	CEPH_OSD_OP_TMAPGET = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_DATA | 12,
+
+	CEPH_OSD_OP_CREATE  = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 13,
+	CEPH_OSD_OP_ROLLBACK= CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 14,
+
+	CEPH_OSD_OP_WATCH   = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 15,
+
+	/** attrs **/
+	/* read */
+	CEPH_OSD_OP_GETXATTR  = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_ATTR | 1,
+	CEPH_OSD_OP_GETXATTRS = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_ATTR | 2,
+	CEPH_OSD_OP_CMPXATTR  = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_ATTR | 3,
+
+	/* write */
+	CEPH_OSD_OP_SETXATTR  = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_ATTR | 1,
+	CEPH_OSD_OP_SETXATTRS = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_ATTR | 2,
+	CEPH_OSD_OP_RESETXATTRS = CEPH_OSD_OP_MODE_WR|CEPH_OSD_OP_TYPE_ATTR | 3,
+	CEPH_OSD_OP_RMXATTR   = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_ATTR | 4,
+
+	/** subop **/
+	CEPH_OSD_OP_PULL            = CEPH_OSD_OP_MODE_SUB | 1,
+	CEPH_OSD_OP_PUSH            = CEPH_OSD_OP_MODE_SUB | 2,
+	CEPH_OSD_OP_BALANCEREADS    = CEPH_OSD_OP_MODE_SUB | 3,
+	CEPH_OSD_OP_UNBALANCEREADS  = CEPH_OSD_OP_MODE_SUB | 4,
+	CEPH_OSD_OP_SCRUB           = CEPH_OSD_OP_MODE_SUB | 5,
+	CEPH_OSD_OP_SCRUB_RESERVE   = CEPH_OSD_OP_MODE_SUB | 6,
+	CEPH_OSD_OP_SCRUB_UNRESERVE = CEPH_OSD_OP_MODE_SUB | 7,
+	CEPH_OSD_OP_SCRUB_STOP      = CEPH_OSD_OP_MODE_SUB | 8,
+
+	/** lock **/
+	CEPH_OSD_OP_WRLOCK    = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_LOCK | 1,
+	CEPH_OSD_OP_WRUNLOCK  = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_LOCK | 2,
+	CEPH_OSD_OP_RDLOCK    = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_LOCK | 3,
+	CEPH_OSD_OP_RDUNLOCK  = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_LOCK | 4,
+	CEPH_OSD_OP_UPLOCK    = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_LOCK | 5,
+	CEPH_OSD_OP_DNLOCK    = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_LOCK | 6,
+
+	/** exec **/
+	CEPH_OSD_OP_CALL    = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_EXEC | 1,
+
+	/** pg **/
+	CEPH_OSD_OP_PGLS      = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_PG | 1,
+};
+
+static inline int ceph_osd_op_type_lock(int op)
+{
+	return (op & CEPH_OSD_OP_TYPE) == CEPH_OSD_OP_TYPE_LOCK;
+}
+static inline int ceph_osd_op_type_data(int op)
+{
+	return (op & CEPH_OSD_OP_TYPE) == CEPH_OSD_OP_TYPE_DATA;
+}
+static inline int ceph_osd_op_type_attr(int op)
+{
+	return (op & CEPH_OSD_OP_TYPE) == CEPH_OSD_OP_TYPE_ATTR;
+}
+static inline int ceph_osd_op_type_exec(int op)
+{
+	return (op & CEPH_OSD_OP_TYPE) == CEPH_OSD_OP_TYPE_EXEC;
+}
+static inline int ceph_osd_op_type_pg(int op)
+{
+	return (op & CEPH_OSD_OP_TYPE) == CEPH_OSD_OP_TYPE_PG;
+}
+
+static inline int ceph_osd_op_mode_subop(int op)
+{
+	return (op & CEPH_OSD_OP_MODE) == CEPH_OSD_OP_MODE_SUB;
+}
+static inline int ceph_osd_op_mode_read(int op)
+{
+	return (op & CEPH_OSD_OP_MODE) == CEPH_OSD_OP_MODE_RD;
+}
+static inline int ceph_osd_op_mode_modify(int op)
+{
+	return (op & CEPH_OSD_OP_MODE) == CEPH_OSD_OP_MODE_WR;
+}
+
+/*
+ * note that the following tmap stuff is also defined in the ceph librados.h
+ * any modification here needs to be updated there
+ */
+#define CEPH_OSD_TMAP_HDR 'h'
+#define CEPH_OSD_TMAP_SET 's'
+#define CEPH_OSD_TMAP_RM  'r'
+
+extern const char *ceph_osd_op_name(int op);
+
+
+/*
+ * osd op flags
+ *
+ * An op may be READ, WRITE, or READ|WRITE.
+ */
+enum {
+	CEPH_OSD_FLAG_ACK = 1,          /* want (or is) "ack" ack */
+	CEPH_OSD_FLAG_ONNVRAM = 2,      /* want (or is) "onnvram" ack */
+	CEPH_OSD_FLAG_ONDISK = 4,       /* want (or is) "ondisk" ack */
+	CEPH_OSD_FLAG_RETRY = 8,        /* resend attempt */
+	CEPH_OSD_FLAG_READ = 16,        /* op may read */
+	CEPH_OSD_FLAG_WRITE = 32,       /* op may write */
+	CEPH_OSD_FLAG_ORDERSNAP = 64,   /* EOLDSNAP if snapc is out of order */
+	CEPH_OSD_FLAG_PEERSTAT = 128,   /* msg includes osd_peer_stat */
+	CEPH_OSD_FLAG_BALANCE_READS = 256,
+	CEPH_OSD_FLAG_PARALLELEXEC = 512, /* execute op in parallel */
+	CEPH_OSD_FLAG_PGOP = 1024,      /* pg op, no object */
+	CEPH_OSD_FLAG_EXEC = 2048,      /* op may exec */
+	CEPH_OSD_FLAG_EXEC_PUBLIC = 4096, /* op may exec (public) */
+};
+
+enum {
+	CEPH_OSD_OP_FLAG_EXCL = 1,      /* EXCL object create */
+};
+
+#define EOLDSNAPC    ERESTART  /* ORDERSNAP flag set; writer has old snapc*/
+#define EBLACKLISTED ESHUTDOWN /* blacklisted */
+
+/* xattr comparison */
+enum {
+	CEPH_OSD_CMPXATTR_OP_NOP = 0,
+	CEPH_OSD_CMPXATTR_OP_EQ  = 1,
+	CEPH_OSD_CMPXATTR_OP_NE  = 2,
+	CEPH_OSD_CMPXATTR_OP_GT  = 3,
+	CEPH_OSD_CMPXATTR_OP_GTE = 4,
+	CEPH_OSD_CMPXATTR_OP_LT  = 5,
+	CEPH_OSD_CMPXATTR_OP_LTE = 6
+};
+
+enum {
+	CEPH_OSD_CMPXATTR_MODE_STRING = 1,
+	CEPH_OSD_CMPXATTR_MODE_U64    = 2
+};
+
+#define RADOS_NOTIFY_VER	1
+
+/*
+ * an individual object operation.  each may be accompanied by some data
+ * payload
+ */
+struct ceph_osd_op {
+	__le16 op;           /* CEPH_OSD_OP_* */
+	__le32 flags;        /* CEPH_OSD_FLAG_* */
+	union {
+		struct {
+			__le64 offset, length;
+			__le64 truncate_size;
+			__le32 truncate_seq;
+		} __attribute__ ((packed)) extent;
+		struct {
+			__le32 name_len;
+			__le32 value_len;
+			__u8 cmp_op;       /* CEPH_OSD_CMPXATTR_OP_* */
+			__u8 cmp_mode;     /* CEPH_OSD_CMPXATTR_MODE_* */
+		} __attribute__ ((packed)) xattr;
+		struct {
+			__u8 class_len;
+			__u8 method_len;
+			__u8 argc;
+			__le32 indata_len;
+		} __attribute__ ((packed)) cls;
+		struct {
+			__le64 cookie, count;
+		} __attribute__ ((packed)) pgls;
+	        struct {
+		        __le64 snapid;
+	        } __attribute__ ((packed)) snap;
+		struct {
+			__le64 cookie;
+			__le64 ver;
+			__u8 flag;	/* 0 = unwatch, 1 = watch */
+		} __attribute__ ((packed)) watch;
+};
+	__le32 payload_len;
+} __attribute__ ((packed));
+
+/*
+ * osd request message header.  each request may include multiple
+ * ceph_osd_op object operations.
+ */
+struct ceph_osd_request_head {
+	__le32 client_inc;                 /* client incarnation */
+	struct ceph_object_layout layout;  /* pgid */
+	__le32 osdmap_epoch;               /* client's osdmap epoch */
+
+	__le32 flags;
+
+	struct ceph_timespec mtime;        /* for mutations only */
+	struct ceph_eversion reassert_version; /* if we are replaying op */
+
+	__le32 object_len;     /* length of object name */
+
+	__le64 snapid;         /* snapid to read */
+	__le64 snap_seq;       /* writer's snap context */
+	__le32 num_snaps;
+
+	__le16 num_ops;
+	struct ceph_osd_op ops[];  /* followed by ops[], obj, ticket, snaps */
+} __attribute__ ((packed));
+
+struct ceph_osd_reply_head {
+	__le32 client_inc;                /* client incarnation */
+	__le32 flags;
+	struct ceph_object_layout layout;
+	__le32 osdmap_epoch;
+	struct ceph_eversion reassert_version; /* for replaying uncommitted */
+
+	__le32 result;                    /* result code */
+
+	__le32 object_len;                /* length of object name */
+	__le32 num_ops;
+	struct ceph_osd_op ops[0];  /* ops[], object */
+} __attribute__ ((packed));
+
+
+
+#endif
diff --git a/include/linux/ceph/types.h b/include/linux/ceph/types.h
new file mode 100644
index 00000000..28b35a00
--- /dev/null
+++ b/include/linux/ceph/types.h
@@ -0,0 +1,29 @@
+#ifndef _FS_CEPH_TYPES_H
+#define _FS_CEPH_TYPES_H
+
+/* needed before including ceph_fs.h */
+#include <linux/in.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/string.h>
+
+#include "ceph_fs.h"
+#include "ceph_frag.h"
+#include "ceph_hash.h"
+
+/*
+ * Identify inodes by both their ino AND snapshot id (a u64).
+ */
+struct ceph_vino {
+	u64 ino;
+	u64 snap;
+};
+
+
+/* context for the caps reservation mechanism */
+struct ceph_cap_reservation {
+	int count;
+};
+
+
+#endif
diff --git a/include/linux/cfag12864b.h b/include/linux/cfag12864b.h
new file mode 100644
index 00000000..b454dfce
--- /dev/null
+++ b/include/linux/cfag12864b.h
@@ -0,0 +1,82 @@
+/*
+ *    Filename: cfag12864b.h
+ *     Version: 0.1.0
+ * Description: cfag12864b LCD driver header
+ *     License: GPLv2
+ *
+ *      Author: Copyright (C) Miguel Ojeda Sandonis
+ *        Date: 2006-10-12
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef _CFAG12864B_H_
+#define _CFAG12864B_H_
+
+#define CFAG12864B_WIDTH	(128)
+#define CFAG12864B_HEIGHT	(64)
+#define CFAG12864B_CONTROLLERS	(2)
+#define CFAG12864B_PAGES	(8)
+#define CFAG12864B_ADDRESSES	(64)
+#define CFAG12864B_SIZE		((CFAG12864B_CONTROLLERS) * \
+				(CFAG12864B_PAGES) * \
+				(CFAG12864B_ADDRESSES))
+
+/*
+ * The driver will blit this buffer to the LCD
+ *
+ * Its size is CFAG12864B_SIZE.
+ */
+extern unsigned char * cfag12864b_buffer;
+
+/*
+ * Get the refresh rate of the LCD
+ *
+ * Returns the refresh rate (hertz).
+ */
+extern unsigned int cfag12864b_getrate(void);
+
+/*
+ * Enable refreshing
+ *
+ * Returns 0 if successful (anyone was using it),
+ * or != 0 if failed (someone is using it).
+ */
+extern unsigned char cfag12864b_enable(void);
+
+/*
+ * Disable refreshing
+ *
+ * You should call this only when you finish using the LCD.
+ */
+extern void cfag12864b_disable(void);
+
+/*
+ * Is enabled refreshing? (is anyone using the module?)
+ *
+ * Returns 0 if refreshing is not enabled (anyone is using it),
+ * or != 0 if refreshing is enabled (someone is using it).
+ *
+ * Useful for buffer read-only modules.
+ */
+extern unsigned char cfag12864b_isenabled(void);
+
+/*
+ * Is the module inited?
+ */
+extern unsigned char cfag12864b_isinited(void);
+
+#endif /* _CFAG12864B_H_ */
+
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
new file mode 100644
index 00000000..b2a37357
--- /dev/null
+++ b/include/linux/cgroup.h
@@ -0,0 +1,627 @@
+#ifndef _LINUX_CGROUP_H
+#define _LINUX_CGROUP_H
+/*
+ *  cgroup interface
+ *
+ *  Copyright (C) 2003 BULL SA
+ *  Copyright (C) 2004-2006 Silicon Graphics, Inc.
+ *
+ */
+
+#include <linux/sched.h>
+#include <linux/cpumask.h>
+#include <linux/nodemask.h>
+#include <linux/rcupdate.h>
+#include <linux/cgroupstats.h>
+#include <linux/prio_heap.h>
+#include <linux/rwsem.h>
+#include <linux/idr.h>
+
+#ifdef CONFIG_CGROUPS
+
+struct cgroupfs_root;
+struct cgroup_subsys;
+struct inode;
+struct cgroup;
+struct css_id;
+
+extern int cgroup_init_early(void);
+extern int cgroup_init(void);
+extern void cgroup_lock(void);
+extern int cgroup_lock_is_held(void);
+extern bool cgroup_lock_live_group(struct cgroup *cgrp);
+extern void cgroup_unlock(void);
+extern void cgroup_fork(struct task_struct *p);
+extern void cgroup_fork_callbacks(struct task_struct *p);
+extern void cgroup_post_fork(struct task_struct *p);
+extern void cgroup_exit(struct task_struct *p, int run_callbacks);
+extern int cgroupstats_build(struct cgroupstats *stats,
+				struct dentry *dentry);
+extern int cgroup_load_subsys(struct cgroup_subsys *ss);
+extern void cgroup_unload_subsys(struct cgroup_subsys *ss);
+
+extern const struct file_operations proc_cgroup_operations;
+
+/* Define the enumeration of all builtin cgroup subsystems */
+#define SUBSYS(_x) _x ## _subsys_id,
+enum cgroup_subsys_id {
+#include <linux/cgroup_subsys.h>
+	CGROUP_BUILTIN_SUBSYS_COUNT
+};
+#undef SUBSYS
+/*
+ * This define indicates the maximum number of subsystems that can be loaded
+ * at once. We limit to this many since cgroupfs_root has subsys_bits to keep
+ * track of all of them.
+ */
+#define CGROUP_SUBSYS_COUNT (BITS_PER_BYTE*sizeof(unsigned long))
+
+/* Per-subsystem/per-cgroup state maintained by the system. */
+struct cgroup_subsys_state {
+	/*
+	 * The cgroup that this subsystem is attached to. Useful
+	 * for subsystems that want to know about the cgroup
+	 * hierarchy structure
+	 */
+	struct cgroup *cgroup;
+
+	/*
+	 * State maintained by the cgroup system to allow subsystems
+	 * to be "busy". Should be accessed via css_get(),
+	 * css_tryget() and and css_put().
+	 */
+
+	atomic_t refcnt;
+
+	unsigned long flags;
+	/* ID for this css, if possible */
+	struct css_id __rcu *id;
+};
+
+/* bits in struct cgroup_subsys_state flags field */
+enum {
+	CSS_ROOT, /* This CSS is the root of the subsystem */
+	CSS_REMOVED, /* This CSS is dead */
+};
+
+/*
+ * Call css_get() to hold a reference on the css; it can be used
+ * for a reference obtained via:
+ * - an existing ref-counted reference to the css
+ * - task->cgroups for a locked task
+ */
+
+extern void __css_get(struct cgroup_subsys_state *css, int count);
+static inline void css_get(struct cgroup_subsys_state *css)
+{
+	/* We don't need to reference count the root state */
+	if (!test_bit(CSS_ROOT, &css->flags))
+		__css_get(css, 1);
+}
+
+static inline bool css_is_removed(struct cgroup_subsys_state *css)
+{
+	return test_bit(CSS_REMOVED, &css->flags);
+}
+
+/*
+ * Call css_tryget() to take a reference on a css if your existing
+ * (known-valid) reference isn't already ref-counted. Returns false if
+ * the css has been destroyed.
+ */
+
+static inline bool css_tryget(struct cgroup_subsys_state *css)
+{
+	if (test_bit(CSS_ROOT, &css->flags))
+		return true;
+	while (!atomic_inc_not_zero(&css->refcnt)) {
+		if (test_bit(CSS_REMOVED, &css->flags))
+			return false;
+		cpu_relax();
+	}
+	return true;
+}
+
+/*
+ * css_put() should be called to release a reference taken by
+ * css_get() or css_tryget()
+ */
+
+extern void __css_put(struct cgroup_subsys_state *css, int count);
+static inline void css_put(struct cgroup_subsys_state *css)
+{
+	if (!test_bit(CSS_ROOT, &css->flags))
+		__css_put(css, 1);
+}
+
+/* bits in struct cgroup flags field */
+enum {
+	/* Control Group is dead */
+	CGRP_REMOVED,
+	/* Control Group has ever had a child cgroup or a task */
+	CGRP_RELEASABLE,
+	/* Control Group requires release notifications to userspace */
+	CGRP_NOTIFY_ON_RELEASE,
+	/*
+	 * A thread in rmdir() is wating for this cgroup.
+	 */
+	CGRP_WAIT_ON_RMDIR,
+	/*
+	 * Clone cgroup values when creating a new child cgroup
+	 */
+	CGRP_CLONE_CHILDREN,
+};
+
+struct cgroup {
+	unsigned long flags;		/* "unsigned long" so bitops work */
+
+	/*
+	 * count users of this cgroup. >0 means busy, but doesn't
+	 * necessarily indicate the number of tasks in the cgroup
+	 */
+	atomic_t count;
+
+	/*
+	 * We link our 'sibling' struct into our parent's 'children'.
+	 * Our children link their 'sibling' into our 'children'.
+	 */
+	struct list_head sibling;	/* my parent's children */
+	struct list_head children;	/* my children */
+
+	struct cgroup *parent;		/* my parent */
+	struct dentry __rcu *dentry;	/* cgroup fs entry, RCU protected */
+
+	/* Private pointers for each registered subsystem */
+	struct cgroup_subsys_state *subsys[CGROUP_SUBSYS_COUNT];
+
+	struct cgroupfs_root *root;
+	struct cgroup *top_cgroup;
+
+	/*
+	 * List of cg_cgroup_links pointing at css_sets with
+	 * tasks in this cgroup. Protected by css_set_lock
+	 */
+	struct list_head css_sets;
+
+	/*
+	 * Linked list running through all cgroups that can
+	 * potentially be reaped by the release agent. Protected by
+	 * release_list_lock
+	 */
+	struct list_head release_list;
+
+	/*
+	 * list of pidlists, up to two for each namespace (one for procs, one
+	 * for tasks); created on demand.
+	 */
+	struct list_head pidlists;
+	struct mutex pidlist_mutex;
+
+	/* For RCU-protected deletion */
+	struct rcu_head rcu_head;
+
+	/* List of events which userspace want to receive */
+	struct list_head event_list;
+	spinlock_t event_list_lock;
+};
+
+/*
+ * A css_set is a structure holding pointers to a set of
+ * cgroup_subsys_state objects. This saves space in the task struct
+ * object and speeds up fork()/exit(), since a single inc/dec and a
+ * list_add()/del() can bump the reference count on the entire cgroup
+ * set for a task.
+ */
+
+struct css_set {
+
+	/* Reference count */
+	atomic_t refcount;
+
+	/*
+	 * List running through all cgroup groups in the same hash
+	 * slot. Protected by css_set_lock
+	 */
+	struct hlist_node hlist;
+
+	/*
+	 * List running through all tasks using this cgroup
+	 * group. Protected by css_set_lock
+	 */
+	struct list_head tasks;
+
+	/*
+	 * List of cg_cgroup_link objects on link chains from
+	 * cgroups referenced from this css_set. Protected by
+	 * css_set_lock
+	 */
+	struct list_head cg_links;
+
+	/*
+	 * Set of subsystem states, one for each subsystem. This array
+	 * is immutable after creation apart from the init_css_set
+	 * during subsystem registration (at boot time) and modular subsystem
+	 * loading/unloading.
+	 */
+	struct cgroup_subsys_state *subsys[CGROUP_SUBSYS_COUNT];
+
+	/* For RCU-protected deletion */
+	struct rcu_head rcu_head;
+	struct work_struct work;
+};
+
+/*
+ * cgroup_map_cb is an abstract callback API for reporting map-valued
+ * control files
+ */
+
+struct cgroup_map_cb {
+	int (*fill)(struct cgroup_map_cb *cb, const char *key, u64 value);
+	void *state;
+};
+
+/*
+ * struct cftype: handler definitions for cgroup control files
+ *
+ * When reading/writing to a file:
+ *	- the cgroup to use is file->f_dentry->d_parent->d_fsdata
+ *	- the 'cftype' of the file is file->f_dentry->d_fsdata
+ */
+
+#define MAX_CFTYPE_NAME 64
+struct cftype {
+	/*
+	 * By convention, the name should begin with the name of the
+	 * subsystem, followed by a period
+	 */
+	char name[MAX_CFTYPE_NAME];
+	int private;
+	/*
+	 * If not 0, file mode is set to this value, otherwise it will
+	 * be figured out automatically
+	 */
+	umode_t mode;
+
+	/*
+	 * If non-zero, defines the maximum length of string that can
+	 * be passed to write_string; defaults to 64
+	 */
+	size_t max_write_len;
+
+	int (*open)(struct inode *inode, struct file *file);
+	ssize_t (*read)(struct cgroup *cgrp, struct cftype *cft,
+			struct file *file,
+			char __user *buf, size_t nbytes, loff_t *ppos);
+	/*
+	 * read_u64() is a shortcut for the common case of returning a
+	 * single integer. Use it in place of read()
+	 */
+	u64 (*read_u64)(struct cgroup *cgrp, struct cftype *cft);
+	/*
+	 * read_s64() is a signed version of read_u64()
+	 */
+	s64 (*read_s64)(struct cgroup *cgrp, struct cftype *cft);
+	/*
+	 * read_map() is used for defining a map of key/value
+	 * pairs. It should call cb->fill(cb, key, value) for each
+	 * entry. The key/value pairs (and their ordering) should not
+	 * change between reboots.
+	 */
+	int (*read_map)(struct cgroup *cont, struct cftype *cft,
+			struct cgroup_map_cb *cb);
+	/*
+	 * read_seq_string() is used for outputting a simple sequence
+	 * using seqfile.
+	 */
+	int (*read_seq_string)(struct cgroup *cont, struct cftype *cft,
+			       struct seq_file *m);
+
+	ssize_t (*write)(struct cgroup *cgrp, struct cftype *cft,
+			 struct file *file,
+			 const char __user *buf, size_t nbytes, loff_t *ppos);
+
+	/*
+	 * write_u64() is a shortcut for the common case of accepting
+	 * a single integer (as parsed by simple_strtoull) from
+	 * userspace. Use in place of write(); return 0 or error.
+	 */
+	int (*write_u64)(struct cgroup *cgrp, struct cftype *cft, u64 val);
+	/*
+	 * write_s64() is a signed version of write_u64()
+	 */
+	int (*write_s64)(struct cgroup *cgrp, struct cftype *cft, s64 val);
+
+	/*
+	 * write_string() is passed a nul-terminated kernelspace
+	 * buffer of maximum length determined by max_write_len.
+	 * Returns 0 or -ve error code.
+	 */
+	int (*write_string)(struct cgroup *cgrp, struct cftype *cft,
+			    const char *buffer);
+	/*
+	 * trigger() callback can be used to get some kick from the
+	 * userspace, when the actual string written is not important
+	 * at all. The private field can be used to determine the
+	 * kick type for multiplexing.
+	 */
+	int (*trigger)(struct cgroup *cgrp, unsigned int event);
+
+	int (*release)(struct inode *inode, struct file *file);
+
+	/*
+	 * register_event() callback will be used to add new userspace
+	 * waiter for changes related to the cftype. Implement it if
+	 * you want to provide this functionality. Use eventfd_signal()
+	 * on eventfd to send notification to userspace.
+	 */
+	int (*register_event)(struct cgroup *cgrp, struct cftype *cft,
+			struct eventfd_ctx *eventfd, const char *args);
+	/*
+	 * unregister_event() callback will be called when userspace
+	 * closes the eventfd or on cgroup removing.
+	 * This callback must be implemented, if you want provide
+	 * notification functionality.
+	 */
+	void (*unregister_event)(struct cgroup *cgrp, struct cftype *cft,
+			struct eventfd_ctx *eventfd);
+};
+
+struct cgroup_scanner {
+	struct cgroup *cg;
+	int (*test_task)(struct task_struct *p, struct cgroup_scanner *scan);
+	void (*process_task)(struct task_struct *p,
+			struct cgroup_scanner *scan);
+	struct ptr_heap *heap;
+	void *data;
+};
+
+/*
+ * Add a new file to the given cgroup directory. Should only be
+ * called by subsystems from within a populate() method
+ */
+int cgroup_add_file(struct cgroup *cgrp, struct cgroup_subsys *subsys,
+		       const struct cftype *cft);
+
+/*
+ * Add a set of new files to the given cgroup directory. Should
+ * only be called by subsystems from within a populate() method
+ */
+int cgroup_add_files(struct cgroup *cgrp,
+			struct cgroup_subsys *subsys,
+			const struct cftype cft[],
+			int count);
+
+int cgroup_is_removed(const struct cgroup *cgrp);
+
+int cgroup_path(const struct cgroup *cgrp, char *buf, int buflen);
+
+int cgroup_task_count(const struct cgroup *cgrp);
+
+/* Return true if cgrp is a descendant of the task's cgroup */
+int cgroup_is_descendant(const struct cgroup *cgrp, struct task_struct *task);
+
+/*
+ * When the subsys has to access css and may add permanent refcnt to css,
+ * it should take care of racy conditions with rmdir(). Following set of
+ * functions, is for stop/restart rmdir if necessary.
+ * Because these will call css_get/put, "css" should be alive css.
+ *
+ *  cgroup_exclude_rmdir();
+ *  ...do some jobs which may access arbitrary empty cgroup
+ *  cgroup_release_and_wakeup_rmdir();
+ *
+ *  When someone removes a cgroup while cgroup_exclude_rmdir() holds it,
+ *  it sleeps and cgroup_release_and_wakeup_rmdir() will wake him up.
+ */
+
+void cgroup_exclude_rmdir(struct cgroup_subsys_state *css);
+void cgroup_release_and_wakeup_rmdir(struct cgroup_subsys_state *css);
+
+/*
+ * Control Group taskset, used to pass around set of tasks to cgroup_subsys
+ * methods.
+ */
+struct cgroup_taskset;
+struct task_struct *cgroup_taskset_first(struct cgroup_taskset *tset);
+struct task_struct *cgroup_taskset_next(struct cgroup_taskset *tset);
+struct cgroup *cgroup_taskset_cur_cgroup(struct cgroup_taskset *tset);
+int cgroup_taskset_size(struct cgroup_taskset *tset);
+
+/**
+ * cgroup_taskset_for_each - iterate cgroup_taskset
+ * @task: the loop cursor
+ * @skip_cgrp: skip if task's cgroup matches this, %NULL to iterate through all
+ * @tset: taskset to iterate
+ */
+#define cgroup_taskset_for_each(task, skip_cgrp, tset)			\
+	for ((task) = cgroup_taskset_first((tset)); (task);		\
+	     (task) = cgroup_taskset_next((tset)))			\
+		if (!(skip_cgrp) ||					\
+		    cgroup_taskset_cur_cgroup((tset)) != (skip_cgrp))
+
+/*
+ * Control Group subsystem type.
+ * See Documentation/cgroups/cgroups.txt for details
+ */
+
+struct cgroup_subsys {
+	struct cgroup_subsys_state *(*create)(struct cgroup *cgrp);
+	int (*pre_destroy)(struct cgroup *cgrp);
+	void (*destroy)(struct cgroup *cgrp);
+	int (*allow_attach)(struct cgroup *cgrp, struct cgroup_taskset *tset);
+	int (*can_attach)(struct cgroup *cgrp, struct cgroup_taskset *tset);
+	void (*cancel_attach)(struct cgroup *cgrp, struct cgroup_taskset *tset);
+	void (*attach)(struct cgroup *cgrp, struct cgroup_taskset *tset);
+	void (*fork)(struct task_struct *task);
+	void (*exit)(struct cgroup *cgrp, struct cgroup *old_cgrp,
+		     struct task_struct *task);
+	int (*populate)(struct cgroup_subsys *ss, struct cgroup *cgrp);
+	void (*post_clone)(struct cgroup *cgrp);
+	void (*bind)(struct cgroup *root);
+
+	int subsys_id;
+	int active;
+	int disabled;
+	int early_init;
+	/*
+	 * True if this subsys uses ID. ID is not available before cgroup_init()
+	 * (not available in early_init time.)
+	 */
+	bool use_id;
+#define MAX_CGROUP_TYPE_NAMELEN 32
+	const char *name;
+
+	/*
+	 * Protects sibling/children links of cgroups in this
+	 * hierarchy, plus protects which hierarchy (or none) the
+	 * subsystem is a part of (i.e. root/sibling).  To avoid
+	 * potential deadlocks, the following operations should not be
+	 * undertaken while holding any hierarchy_mutex:
+	 *
+	 * - allocating memory
+	 * - initiating hotplug events
+	 */
+	struct mutex hierarchy_mutex;
+	struct lock_class_key subsys_key;
+
+	/*
+	 * Link to parent, and list entry in parent's children.
+	 * Protected by this->hierarchy_mutex and cgroup_lock()
+	 */
+	struct cgroupfs_root *root;
+	struct list_head sibling;
+	/* used when use_id == true */
+	struct idr idr;
+	spinlock_t id_lock;
+
+	/* should be defined only by modular subsystems */
+	struct module *module;
+};
+
+#define SUBSYS(_x) extern struct cgroup_subsys _x ## _subsys;
+#include <linux/cgroup_subsys.h>
+#undef SUBSYS
+
+static inline struct cgroup_subsys_state *cgroup_subsys_state(
+	struct cgroup *cgrp, int subsys_id)
+{
+	return cgrp->subsys[subsys_id];
+}
+
+/*
+ * function to get the cgroup_subsys_state which allows for extra
+ * rcu_dereference_check() conditions, such as locks used during the
+ * cgroup_subsys::attach() methods.
+ */
+#define task_subsys_state_check(task, subsys_id, __c)			\
+	rcu_dereference_check(task->cgroups->subsys[subsys_id],		\
+			      lockdep_is_held(&task->alloc_lock) ||	\
+			      cgroup_lock_is_held() || (__c))
+
+static inline struct cgroup_subsys_state *
+task_subsys_state(struct task_struct *task, int subsys_id)
+{
+	return task_subsys_state_check(task, subsys_id, false);
+}
+
+static inline struct cgroup* task_cgroup(struct task_struct *task,
+					       int subsys_id)
+{
+	return task_subsys_state(task, subsys_id)->cgroup;
+}
+
+/* A cgroup_iter should be treated as an opaque object */
+struct cgroup_iter {
+	struct list_head *cg_link;
+	struct list_head *task;
+};
+
+/*
+ * To iterate across the tasks in a cgroup:
+ *
+ * 1) call cgroup_iter_start to initialize an iterator
+ *
+ * 2) call cgroup_iter_next() to retrieve member tasks until it
+ *    returns NULL or until you want to end the iteration
+ *
+ * 3) call cgroup_iter_end() to destroy the iterator.
+ *
+ * Or, call cgroup_scan_tasks() to iterate through every task in a
+ * cgroup - cgroup_scan_tasks() holds the css_set_lock when calling
+ * the test_task() callback, but not while calling the process_task()
+ * callback.
+ */
+void cgroup_iter_start(struct cgroup *cgrp, struct cgroup_iter *it);
+struct task_struct *cgroup_iter_next(struct cgroup *cgrp,
+					struct cgroup_iter *it);
+void cgroup_iter_end(struct cgroup *cgrp, struct cgroup_iter *it);
+int cgroup_scan_tasks(struct cgroup_scanner *scan);
+int cgroup_attach_task(struct cgroup *, struct task_struct *);
+int cgroup_attach_task_all(struct task_struct *from, struct task_struct *);
+
+/*
+ * CSS ID is ID for cgroup_subsys_state structs under subsys. This only works
+ * if cgroup_subsys.use_id == true. It can be used for looking up and scanning.
+ * CSS ID is assigned at cgroup allocation (create) automatically
+ * and removed when subsys calls free_css_id() function. This is because
+ * the lifetime of cgroup_subsys_state is subsys's matter.
+ *
+ * Looking up and scanning function should be called under rcu_read_lock().
+ * Taking cgroup_mutex()/hierarchy_mutex() is not necessary for following calls.
+ * But the css returned by this routine can be "not populated yet" or "being
+ * destroyed". The caller should check css and cgroup's status.
+ */
+
+/*
+ * Typically Called at ->destroy(), or somewhere the subsys frees
+ * cgroup_subsys_state.
+ */
+void free_css_id(struct cgroup_subsys *ss, struct cgroup_subsys_state *css);
+
+/* Find a cgroup_subsys_state which has given ID */
+
+struct cgroup_subsys_state *css_lookup(struct cgroup_subsys *ss, int id);
+
+/*
+ * Get a cgroup whose id is greater than or equal to id under tree of root.
+ * Returning a cgroup_subsys_state or NULL.
+ */
+struct cgroup_subsys_state *css_get_next(struct cgroup_subsys *ss, int id,
+		struct cgroup_subsys_state *root, int *foundid);
+
+/* Returns true if root is ancestor of cg */
+bool css_is_ancestor(struct cgroup_subsys_state *cg,
+		     const struct cgroup_subsys_state *root);
+
+/* Get id and depth of css */
+unsigned short css_id(struct cgroup_subsys_state *css);
+unsigned short css_depth(struct cgroup_subsys_state *css);
+struct cgroup_subsys_state *cgroup_css_from_dir(struct file *f, int id);
+
+#else /* !CONFIG_CGROUPS */
+
+static inline int cgroup_init_early(void) { return 0; }
+static inline int cgroup_init(void) { return 0; }
+static inline void cgroup_fork(struct task_struct *p) {}
+static inline void cgroup_fork_callbacks(struct task_struct *p) {}
+static inline void cgroup_post_fork(struct task_struct *p) {}
+static inline void cgroup_exit(struct task_struct *p, int callbacks) {}
+
+static inline void cgroup_lock(void) {}
+static inline void cgroup_unlock(void) {}
+static inline int cgroupstats_build(struct cgroupstats *stats,
+					struct dentry *dentry)
+{
+	return -EINVAL;
+}
+
+/* No cgroups - nothing to do */
+static inline int cgroup_attach_task_all(struct task_struct *from,
+					 struct task_struct *t)
+{
+	return 0;
+}
+
+#endif /* !CONFIG_CGROUPS */
+
+#endif /* _LINUX_CGROUP_H */
diff --git a/include/linux/cgroup_subsys.h b/include/linux/cgroup_subsys.h
new file mode 100644
index 00000000..0bd390ce
--- /dev/null
+++ b/include/linux/cgroup_subsys.h
@@ -0,0 +1,74 @@
+/* Add subsystem definitions of the form SUBSYS(<name>) in this
+ * file. Surround each one by a line of comment markers so that
+ * patches don't collide
+ */
+
+/* */
+
+/* */
+
+#ifdef CONFIG_CPUSETS
+SUBSYS(cpuset)
+#endif
+
+/* */
+
+#ifdef CONFIG_CGROUP_DEBUG
+SUBSYS(debug)
+#endif
+
+/* */
+
+#ifdef CONFIG_CGROUP_SCHED
+SUBSYS(cpu_cgroup)
+#endif
+
+/* */
+
+#ifdef CONFIG_CGROUP_CPUACCT
+SUBSYS(cpuacct)
+#endif
+
+/* */
+
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
+SUBSYS(mem_cgroup)
+#endif
+
+/* */
+
+#ifdef CONFIG_CGROUP_DEVICE
+SUBSYS(devices)
+#endif
+
+/* */
+
+#ifdef CONFIG_CGROUP_FREEZER
+SUBSYS(freezer)
+#endif
+
+/* */
+
+#ifdef CONFIG_NET_CLS_CGROUP
+SUBSYS(net_cls)
+#endif
+
+/* */
+
+#ifdef CONFIG_BLK_CGROUP
+SUBSYS(blkio)
+#endif
+
+/* */
+
+#ifdef CONFIG_CGROUP_PERF
+SUBSYS(perf)
+#endif
+
+/* */
+
+#ifdef CONFIG_NETPRIO_CGROUP
+SUBSYS(net_prio)
+#endif
+
+/* */
diff --git a/include/linux/cgroupstats.h b/include/linux/cgroupstats.h
new file mode 100644
index 00000000..3753c331
--- /dev/null
+++ b/include/linux/cgroupstats.h
@@ -0,0 +1,71 @@
+/* cgroupstats.h - exporting per-cgroup statistics
+ *
+ * Copyright IBM Corporation, 2007
+ * Author Balbir Singh <balbir@linux.vnet.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _LINUX_CGROUPSTATS_H
+#define _LINUX_CGROUPSTATS_H
+
+#include <linux/types.h>
+#include <linux/taskstats.h>
+
+/*
+ * Data shared between user space and kernel space on a per cgroup
+ * basis. This data is shared using taskstats.
+ *
+ * Most of these states are derived by looking at the task->state value
+ * For the nr_io_wait state, a flag in the delay accounting structure
+ * indicates that the task is waiting on IO
+ *
+ * Each member is aligned to a 8 byte boundary.
+ */
+struct cgroupstats {
+	__u64	nr_sleeping;		/* Number of tasks sleeping */
+	__u64	nr_running;		/* Number of tasks running */
+	__u64	nr_stopped;		/* Number of tasks in stopped state */
+	__u64	nr_uninterruptible;	/* Number of tasks in uninterruptible */
+					/* state */
+	__u64	nr_io_wait;		/* Number of tasks waiting on IO */
+};
+
+/*
+ * Commands sent from userspace
+ * Not versioned. New commands should only be inserted at the enum's end
+ * prior to __CGROUPSTATS_CMD_MAX
+ */
+
+enum {
+	CGROUPSTATS_CMD_UNSPEC = __TASKSTATS_CMD_MAX,	/* Reserved */
+	CGROUPSTATS_CMD_GET,		/* user->kernel request/get-response */
+	CGROUPSTATS_CMD_NEW,		/* kernel->user event */
+	__CGROUPSTATS_CMD_MAX,
+};
+
+#define CGROUPSTATS_CMD_MAX (__CGROUPSTATS_CMD_MAX - 1)
+
+enum {
+	CGROUPSTATS_TYPE_UNSPEC = 0,	/* Reserved */
+	CGROUPSTATS_TYPE_CGROUP_STATS,	/* contains name + stats */
+	__CGROUPSTATS_TYPE_MAX,
+};
+
+#define CGROUPSTATS_TYPE_MAX (__CGROUPSTATS_TYPE_MAX - 1)
+
+enum {
+	CGROUPSTATS_CMD_ATTR_UNSPEC = 0,
+	CGROUPSTATS_CMD_ATTR_FD,
+	__CGROUPSTATS_CMD_ATTR_MAX,
+};
+
+#define CGROUPSTATS_CMD_ATTR_MAX (__CGROUPSTATS_CMD_ATTR_MAX - 1)
+
+#endif /* _LINUX_CGROUPSTATS_H */
diff --git a/include/linux/chio.h b/include/linux/chio.h
new file mode 100644
index 00000000..d9bac7f9
--- /dev/null
+++ b/include/linux/chio.h
@@ -0,0 +1,168 @@
+/*
+ * ioctl interface for the scsi media changer driver
+ */
+
+/* changer element types */
+#define CHET_MT   0	/* media transport element (robot) */
+#define CHET_ST   1	/* storage element (media slots) */
+#define CHET_IE   2	/* import/export element */
+#define CHET_DT   3	/* data transfer element (tape/cdrom/whatever) */
+#define CHET_V1   4	/* vendor specific #1 */
+#define CHET_V2   5	/* vendor specific #2 */
+#define CHET_V3   6	/* vendor specific #3 */
+#define CHET_V4   7	/* vendor specific #4 */
+
+
+/*
+ * CHIOGPARAMS
+ *    query changer properties
+ *
+ * CHIOVGPARAMS
+ *    query vendor-specific element types
+ *
+ *    accessing elements works by specifing type and unit of the element.
+ *    for example, storage elements are addressed with type = CHET_ST and
+ *    unit = 0 .. cp_nslots-1
+ *
+ */
+struct changer_params {
+	int cp_curpicker;  /* current transport element */
+	int cp_npickers;   /* number of transport elements      (CHET_MT) */
+	int cp_nslots;     /* number of storage elements        (CHET_ST) */
+	int cp_nportals;   /* number of import/export elements  (CHET_IE) */
+	int cp_ndrives;    /* number of data transfer elements  (CHET_DT) */
+};
+struct changer_vendor_params {
+	int  cvp_n1;       /* number of vendor specific elems   (CHET_V1) */
+	char cvp_label1[16];
+	int  cvp_n2;       /* number of vendor specific elems   (CHET_V2) */
+	char cvp_label2[16];
+	int  cvp_n3;       /* number of vendor specific elems   (CHET_V3) */
+	char cvp_label3[16];
+	int  cvp_n4;       /* number of vendor specific elems   (CHET_V4) */
+	char cvp_label4[16];
+	int  reserved[8];
+};
+
+
+/*
+ * CHIOMOVE
+ *    move a medium from one element to another
+ */
+struct changer_move {
+	int cm_fromtype;	/* type/unit of source element */
+	int cm_fromunit;	
+	int cm_totype;	/* type/unit of destination element */
+	int cm_tounit;
+	int cm_flags;
+};
+#define CM_INVERT   1   /* flag: rotate media (for double-sided like MOD) */
+
+
+/*
+ * CHIOEXCHANGE
+ *    move one medium from element #1 to element #2,
+ *    and another one from element #2 to element #3.
+ *    element #1 and #3 are allowed to be identical.
+ */
+struct changer_exchange {
+	int ce_srctype;	    /* type/unit of element #1 */
+	int ce_srcunit;
+	int ce_fdsttype;    /* type/unit of element #2 */
+	int ce_fdstunit;
+	int ce_sdsttype;    /* type/unit of element #3 */
+	int ce_sdstunit;
+	int ce_flags;
+};
+#define CE_INVERT1   1
+#define CE_INVERT2   2
+
+
+/*
+ * CHIOPOSITION
+ *    move the transport element (robot arm) to a specific element.
+ */
+struct changer_position {
+	int cp_type;
+	int cp_unit;
+	int cp_flags;
+};
+#define CP_INVERT   1
+
+
+/*
+ * CHIOGSTATUS
+ *    get element status for all elements of a specific type
+ */
+struct changer_element_status {
+	int             ces_type;
+	unsigned char   __user *ces_data;
+};
+#define CESTATUS_FULL     0x01 /* full */
+#define CESTATUS_IMPEXP   0x02	/* media was imported (inserted by sysop) */
+#define CESTATUS_EXCEPT   0x04	/* error condition */
+#define CESTATUS_ACCESS   0x08	/* access allowed */
+#define CESTATUS_EXENAB   0x10	/* element can export media */
+#define CESTATUS_INENAB   0x20	/* element can import media */
+
+
+/*
+ * CHIOGELEM
+ *    get more detailed status information for a single element
+ */
+struct changer_get_element {
+	int	cge_type;	 /* type/unit */
+	int	cge_unit;
+	int	cge_status;      /* status */
+	int     cge_errno;       /* errno */
+	int     cge_srctype;     /* source element of the last move/exchange */
+	int     cge_srcunit;
+	int     cge_id;          /* scsi id  (for data transfer elements) */
+	int     cge_lun;         /* scsi lun (for data transfer elements) */
+	char    cge_pvoltag[36]; /* primary volume tag */
+	char    cge_avoltag[36]; /* alternate volume tag */
+	int     cge_flags;
+};
+/* flags */
+#define CGE_ERRNO     0x01       /* errno available       */
+#define CGE_INVERT    0x02       /* media inverted        */
+#define CGE_SRC       0x04       /* media src available   */
+#define CGE_IDLUN     0x08       /* ID+LUN available      */
+#define CGE_PVOLTAG   0x10       /* primary volume tag available */
+#define CGE_AVOLTAG   0x20       /* alternate volume tag available */
+
+
+/*
+ * CHIOSVOLTAG
+ *    set volume tag
+ */
+struct changer_set_voltag {
+	int	csv_type;	 /* type/unit */
+	int	csv_unit;
+	char    csv_voltag[36];  /* volume tag */
+	int     csv_flags;
+};
+#define CSV_PVOLTAG   0x01       /* primary volume tag */
+#define CSV_AVOLTAG   0x02       /* alternate volume tag */
+#define CSV_CLEARTAG  0x04       /* clear volume tag */
+
+/* ioctls */
+#define CHIOMOVE       _IOW('c', 1,struct changer_move)
+#define CHIOEXCHANGE   _IOW('c', 2,struct changer_exchange)
+#define CHIOPOSITION   _IOW('c', 3,struct changer_position)
+#define CHIOGPICKER    _IOR('c', 4,int)                        /* not impl. */
+#define CHIOSPICKER    _IOW('c', 5,int)                        /* not impl. */
+#define CHIOGPARAMS    _IOR('c', 6,struct changer_params)
+#define CHIOGSTATUS    _IOW('c', 8,struct changer_element_status)
+#define CHIOGELEM      _IOW('c',16,struct changer_get_element)
+#define CHIOINITELEM   _IO('c',17)
+#define CHIOSVOLTAG    _IOW('c',18,struct changer_set_voltag)
+#define CHIOGVPARAMS   _IOR('c',19,struct changer_vendor_params)
+
+/* ---------------------------------------------------------------------- */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/include/linux/circ_buf.h b/include/linux/circ_buf.h
new file mode 100644
index 00000000..90f2471d
--- /dev/null
+++ b/include/linux/circ_buf.h
@@ -0,0 +1,36 @@
+/*
+ * See Documentation/circular-buffers.txt for more information.
+ */
+
+#ifndef _LINUX_CIRC_BUF_H
+#define _LINUX_CIRC_BUF_H 1
+
+struct circ_buf {
+	char *buf;
+	int head;
+	int tail;
+};
+
+/* Return count in buffer.  */
+#define CIRC_CNT(head,tail,size) (((head) - (tail)) & ((size)-1))
+
+/* Return space available, 0..size-1.  We always leave one free char
+   as a completely full buffer has head == tail, which is the same as
+   empty.  */
+#define CIRC_SPACE(head,tail,size) CIRC_CNT((tail),((head)+1),(size))
+
+/* Return count up to the end of the buffer.  Carefully avoid
+   accessing head and tail more than once, so they can change
+   underneath us without returning inconsistent results.  */
+#define CIRC_CNT_TO_END(head,tail,size) \
+	({int end = (size) - (tail); \
+	  int n = ((head) + end) & ((size)-1); \
+	  n < end ? n : end;})
+
+/* Return space available up to the end of the buffer.  */
+#define CIRC_SPACE_TO_END(head,tail,size) \
+	({int end = (size) - 1 - (head); \
+	  int n = (end + (tail)) & ((size)-1); \
+	  n <= end ? n : end+1;})
+
+#endif /* _LINUX_CIRC_BUF_H  */
diff --git a/include/linux/cleancache.h b/include/linux/cleancache.h
new file mode 100644
index 00000000..42e55dee
--- /dev/null
+++ b/include/linux/cleancache.h
@@ -0,0 +1,122 @@
+#ifndef _LINUX_CLEANCACHE_H
+#define _LINUX_CLEANCACHE_H
+
+#include <linux/fs.h>
+#include <linux/exportfs.h>
+#include <linux/mm.h>
+
+#define CLEANCACHE_KEY_MAX 6
+
+/*
+ * cleancache requires every file with a page in cleancache to have a
+ * unique key unless/until the file is removed/truncated.  For some
+ * filesystems, the inode number is unique, but for "modern" filesystems
+ * an exportable filehandle is required (see exportfs.h)
+ */
+struct cleancache_filekey {
+	union {
+		ino_t ino;
+		__u32 fh[CLEANCACHE_KEY_MAX];
+		u32 key[CLEANCACHE_KEY_MAX];
+	} u;
+};
+
+struct cleancache_ops {
+	int (*init_fs)(size_t);
+	int (*init_shared_fs)(char *uuid, size_t);
+	int (*get_page)(int, struct cleancache_filekey,
+			pgoff_t, struct page *);
+	void (*put_page)(int, struct cleancache_filekey,
+			pgoff_t, struct page *);
+	void (*invalidate_page)(int, struct cleancache_filekey, pgoff_t);
+	void (*invalidate_inode)(int, struct cleancache_filekey);
+	void (*invalidate_fs)(int);
+};
+
+extern struct cleancache_ops
+	cleancache_register_ops(struct cleancache_ops *ops);
+extern void __cleancache_init_fs(struct super_block *);
+extern void __cleancache_init_shared_fs(char *, struct super_block *);
+extern int  __cleancache_get_page(struct page *);
+extern void __cleancache_put_page(struct page *);
+extern void __cleancache_invalidate_page(struct address_space *, struct page *);
+extern void __cleancache_invalidate_inode(struct address_space *);
+extern void __cleancache_invalidate_fs(struct super_block *);
+extern int cleancache_enabled;
+
+#ifdef CONFIG_CLEANCACHE
+static inline bool cleancache_fs_enabled(struct page *page)
+{
+	return page->mapping->host->i_sb->cleancache_poolid >= 0;
+}
+static inline bool cleancache_fs_enabled_mapping(struct address_space *mapping)
+{
+	return mapping->host->i_sb->cleancache_poolid >= 0;
+}
+#else
+#define cleancache_enabled (0)
+#define cleancache_fs_enabled(_page) (0)
+#define cleancache_fs_enabled_mapping(_page) (0)
+#endif
+
+/*
+ * The shim layer provided by these inline functions allows the compiler
+ * to reduce all cleancache hooks to nothingness if CONFIG_CLEANCACHE
+ * is disabled, to a single global variable check if CONFIG_CLEANCACHE
+ * is enabled but no cleancache "backend" has dynamically enabled it,
+ * and, for the most frequent cleancache ops, to a single global variable
+ * check plus a superblock element comparison if CONFIG_CLEANCACHE is enabled
+ * and a cleancache backend has dynamically enabled cleancache, but the
+ * filesystem referenced by that cleancache op has not enabled cleancache.
+ * As a result, CONFIG_CLEANCACHE can be enabled by default with essentially
+ * no measurable performance impact.
+ */
+
+static inline void cleancache_init_fs(struct super_block *sb)
+{
+	if (cleancache_enabled)
+		__cleancache_init_fs(sb);
+}
+
+static inline void cleancache_init_shared_fs(char *uuid, struct super_block *sb)
+{
+	if (cleancache_enabled)
+		__cleancache_init_shared_fs(uuid, sb);
+}
+
+static inline int cleancache_get_page(struct page *page)
+{
+	int ret = -1;
+
+	if (cleancache_enabled && cleancache_fs_enabled(page))
+		ret = __cleancache_get_page(page);
+	return ret;
+}
+
+static inline void cleancache_put_page(struct page *page)
+{
+	if (cleancache_enabled && cleancache_fs_enabled(page))
+		__cleancache_put_page(page);
+}
+
+static inline void cleancache_invalidate_page(struct address_space *mapping,
+					struct page *page)
+{
+	/* careful... page->mapping is NULL sometimes when this is called */
+	if (cleancache_enabled && cleancache_fs_enabled_mapping(mapping))
+		__cleancache_invalidate_page(mapping, page);
+}
+
+static inline void cleancache_invalidate_inode(struct address_space *mapping)
+{
+	if (cleancache_enabled && cleancache_fs_enabled_mapping(mapping))
+		__cleancache_invalidate_inode(mapping);
+}
+
+static inline void cleancache_invalidate_fs(struct super_block *sb)
+{
+	if (cleancache_enabled)
+		__cleancache_invalidate_fs(sb);
+}
+
+#endif /* _LINUX_CLEANCACHE_H */
diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h
new file mode 100644
index 00000000..5e4312b6
--- /dev/null
+++ b/include/linux/clk-private.h
@@ -0,0 +1,196 @@
+/*
+ *  linux/include/linux/clk-private.h
+ *
+ *  Copyright (c) 2010-2011 Jeremy Kerr <jeremy.kerr@canonical.com>
+ *  Copyright (C) 2011-2012 Linaro Ltd <mturquette@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __LINUX_CLK_PRIVATE_H
+#define __LINUX_CLK_PRIVATE_H
+
+#include <linux/clk-provider.h>
+#include <linux/list.h>
+
+/*
+ * WARNING: Do not include clk-private.h from any file that implements struct
+ * clk_ops.  Doing so is a layering violation!
+ *
+ * This header exists only to allow for statically initialized clock data.  Any
+ * static clock data must be defined in a separate file from the logic that
+ * implements the clock operations for that same data.
+ */
+
+#ifdef CONFIG_COMMON_CLK
+
+struct clk {
+	const char		*name;
+	const struct clk_ops	*ops;
+	struct clk_hw		*hw;
+	struct clk		*parent;
+	char			**parent_names;
+	struct clk		**parents;
+	u8			num_parents;
+	unsigned long		rate;
+	unsigned long		new_rate;
+	unsigned long		flags;
+	unsigned int		enable_count;
+	unsigned int		prepare_count;
+	struct hlist_head	children;
+	struct hlist_node	child_node;
+	unsigned int		notifier_count;
+#ifdef CONFIG_COMMON_CLK_DEBUG
+	struct dentry		*dentry;
+#endif
+};
+
+/*
+ * DOC: Basic clock implementations common to many platforms
+ *
+ * Each basic clock hardware type is comprised of a structure describing the
+ * clock hardware, implementations of the relevant callbacks in struct clk_ops,
+ * unique flags for that hardware type, a registration function and an
+ * alternative macro for static initialization
+ */
+
+extern struct clk_ops clk_fixed_rate_ops;
+
+#define DEFINE_CLK_FIXED_RATE(_name, _flags, _rate,		\
+				_fixed_rate_flags)		\
+	static struct clk _name;				\
+	static char *_name##_parent_names[] = {};		\
+	static struct clk_fixed_rate _name##_hw = {		\
+		.hw = {						\
+			.clk = &_name,				\
+		},						\
+		.fixed_rate = _rate,				\
+		.flags = _fixed_rate_flags,			\
+	};							\
+	static struct clk _name = {				\
+		.name = #_name,					\
+		.ops = &clk_fixed_rate_ops,			\
+		.hw = &_name##_hw.hw,				\
+		.parent_names = _name##_parent_names,		\
+		.num_parents =					\
+			ARRAY_SIZE(_name##_parent_names),	\
+		.flags = _flags,				\
+	};
+
+extern struct clk_ops clk_gate_ops;
+
+#define DEFINE_CLK_GATE(_name, _parent_name, _parent_ptr,	\
+				_flags, _reg, _bit_idx,		\
+				_gate_flags, _lock)		\
+	static struct clk _name;				\
+	static char *_name##_parent_names[] = {			\
+		_parent_name,					\
+	};							\
+	static struct clk *_name##_parents[] = {		\
+		_parent_ptr,					\
+	};							\
+	static struct clk_gate _name##_hw = {			\
+		.hw = {						\
+			.clk = &_name,				\
+		},						\
+		.reg = _reg,					\
+		.bit_idx = _bit_idx,				\
+		.flags = _gate_flags,				\
+		.lock = _lock,					\
+	};							\
+	static struct clk _name = {				\
+		.name = #_name,					\
+		.ops = &clk_gate_ops,				\
+		.hw = &_name##_hw.hw,				\
+		.parent_names = _name##_parent_names,		\
+		.num_parents =					\
+			ARRAY_SIZE(_name##_parent_names),	\
+		.parents = _name##_parents,			\
+		.flags = _flags,				\
+	};
+
+extern struct clk_ops clk_divider_ops;
+
+#define DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr,	\
+				_flags, _reg, _shift, _width,	\
+				_divider_flags, _lock)		\
+	static struct clk _name;				\
+	static char *_name##_parent_names[] = {			\
+		_parent_name,					\
+	};							\
+	static struct clk *_name##_parents[] = {		\
+		_parent_ptr,					\
+	};							\
+	static struct clk_divider _name##_hw = {		\
+		.hw = {						\
+			.clk = &_name,				\
+		},						\
+		.reg = _reg,					\
+		.shift = _shift,				\
+		.width = _width,				\
+		.flags = _divider_flags,			\
+		.lock = _lock,					\
+	};							\
+	static struct clk _name = {				\
+		.name = #_name,					\
+		.ops = &clk_divider_ops,			\
+		.hw = &_name##_hw.hw,				\
+		.parent_names = _name##_parent_names,		\
+		.num_parents =					\
+			ARRAY_SIZE(_name##_parent_names),	\
+		.parents = _name##_parents,			\
+		.flags = _flags,				\
+	};
+
+extern struct clk_ops clk_mux_ops;
+
+#define DEFINE_CLK_MUX(_name, _parent_names, _parents, _flags,	\
+				_reg, _shift, _width,		\
+				_mux_flags, _lock)		\
+	static struct clk _name;				\
+	static struct clk_mux _name##_hw = {			\
+		.hw = {						\
+			.clk = &_name,				\
+		},						\
+		.reg = _reg,					\
+		.shift = _shift,				\
+		.width = _width,				\
+		.flags = _mux_flags,				\
+		.lock = _lock,					\
+	};							\
+	static struct clk _name = {				\
+		.name = #_name,					\
+		.ops = &clk_mux_ops,				\
+		.hw = &_name##_hw.hw,				\
+		.parent_names = _parent_names,			\
+		.num_parents =					\
+			ARRAY_SIZE(_parent_names),		\
+		.parents = _parents,				\
+		.flags = _flags,				\
+	};
+
+/**
+ * __clk_init - initialize the data structures in a struct clk
+ * @dev:	device initializing this clk, placeholder for now
+ * @clk:	clk being initialized
+ *
+ * Initializes the lists in struct clk, queries the hardware for the
+ * parent and rate and sets them both.
+ *
+ * Any struct clk passed into __clk_init must have the following members
+ * populated:
+ * 	.name
+ * 	.ops
+ * 	.hw
+ * 	.parent_names
+ * 	.num_parents
+ * 	.flags
+ *
+ * It is not necessary to call clk_register if __clk_init is used directly with
+ * statically initialized clock data.
+ */
+void __clk_init(struct device *dev, struct clk *clk);
+
+#endif /* CONFIG_COMMON_CLK */
+#endif /* CLK_PRIVATE_H */
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
new file mode 100644
index 00000000..5508897a
--- /dev/null
+++ b/include/linux/clk-provider.h
@@ -0,0 +1,300 @@
+/*
+ *  linux/include/linux/clk-provider.h
+ *
+ *  Copyright (c) 2010-2011 Jeremy Kerr <jeremy.kerr@canonical.com>
+ *  Copyright (C) 2011-2012 Linaro Ltd <mturquette@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __LINUX_CLK_PROVIDER_H
+#define __LINUX_CLK_PROVIDER_H
+
+#include <linux/clk.h>
+
+#ifdef CONFIG_COMMON_CLK
+
+/**
+ * struct clk_hw - handle for traversing from a struct clk to its corresponding
+ * hardware-specific structure.  struct clk_hw should be declared within struct
+ * clk_foo and then referenced by the struct clk instance that uses struct
+ * clk_foo's clk_ops
+ *
+ * clk: pointer to the struct clk instance that points back to this struct
+ * clk_hw instance
+ */
+struct clk_hw {
+	struct clk *clk;
+};
+
+/*
+ * flags used across common struct clk.  these flags should only affect the
+ * top-level framework.  custom flags for dealing with hardware specifics
+ * belong in struct clk_foo
+ */
+#define CLK_SET_RATE_GATE	BIT(0) /* must be gated across rate change */
+#define CLK_SET_PARENT_GATE	BIT(1) /* must be gated across re-parent */
+#define CLK_SET_RATE_PARENT	BIT(2) /* propagate rate change up one level */
+#define CLK_IGNORE_UNUSED	BIT(3) /* do not gate even if unused */
+#define CLK_IS_ROOT		BIT(4) /* root clk, has no parent */
+
+/**
+ * struct clk_ops -  Callback operations for hardware clocks; these are to
+ * be provided by the clock implementation, and will be called by drivers
+ * through the clk_* api.
+ *
+ * @prepare:	Prepare the clock for enabling. This must not return until
+ * 		the clock is fully prepared, and it's safe to call clk_enable.
+ * 		This callback is intended to allow clock implementations to
+ * 		do any initialisation that may sleep. Called with
+ * 		prepare_lock held.
+ *
+ * @unprepare:	Release the clock from its prepared state. This will typically
+ * 		undo any work done in the @prepare callback. Called with
+ * 		prepare_lock held.
+ *
+ * @enable:	Enable the clock atomically. This must not return until the
+ * 		clock is generating a valid clock signal, usable by consumer
+ * 		devices. Called with enable_lock held. This function must not
+ * 		sleep.
+ *
+ * @disable:	Disable the clock atomically. Called with enable_lock held.
+ * 		This function must not sleep.
+ *
+ * @recalc_rate	Recalculate the rate of this clock, by quering hardware.  The
+ * 		parent rate is an input parameter.  It is up to the caller to
+ * 		insure that the prepare_mutex is held across this call.
+ * 		Returns the calculated rate.  Optional, but recommended - if
+ * 		this op is not set then clock rate will be initialized to 0.
+ *
+ * @round_rate:	Given a target rate as input, returns the closest rate actually
+ * 		supported by the clock.
+ *
+ * @get_parent:	Queries the hardware to determine the parent of a clock.  The
+ * 		return value is a u8 which specifies the index corresponding to
+ * 		the parent clock.  This index can be applied to either the
+ * 		.parent_names or .parents arrays.  In short, this function
+ * 		translates the parent value read from hardware into an array
+ * 		index.  Currently only called when the clock is initialized by
+ * 		__clk_init.  This callback is mandatory for clocks with
+ * 		multiple parents.  It is optional (and unnecessary) for clocks
+ * 		with 0 or 1 parents.
+ *
+ * @set_parent:	Change the input source of this clock; for clocks with multiple
+ * 		possible parents specify a new parent by passing in the index
+ * 		as a u8 corresponding to the parent in either the .parent_names
+ * 		or .parents arrays.  This function in affect translates an
+ * 		array index into the value programmed into the hardware.
+ * 		Returns 0 on success, -EERROR otherwise.
+ *
+ * @set_rate:	Change the rate of this clock. If this callback returns
+ * 		CLK_SET_RATE_PARENT, the rate change will be propagated to the
+ * 		parent clock (which may propagate again if the parent clock
+ * 		also sets this flag). The requested rate of the parent is
+ * 		passed back from the callback in the second 'unsigned long *'
+ * 		argument.  Note that it is up to the hardware clock's set_rate
+ * 		implementation to insure that clocks do not run out of spec
+ * 		when propgating the call to set_rate up to the parent.  One way
+ * 		to do this is to gate the clock (via clk_disable and/or
+ * 		clk_unprepare) before calling clk_set_rate, then ungating it
+ * 		afterward.  If your clock also has the CLK_GATE_SET_RATE flag
+ * 		set then this will insure safety.  Returns 0 on success,
+ * 		-EERROR otherwise.
+ *
+ * The clk_enable/clk_disable and clk_prepare/clk_unprepare pairs allow
+ * implementations to split any work between atomic (enable) and sleepable
+ * (prepare) contexts.  If enabling a clock requires code that might sleep,
+ * this must be done in clk_prepare.  Clock enable code that will never be
+ * called in a sleepable context may be implement in clk_enable.
+ *
+ * Typically, drivers will call clk_prepare when a clock may be needed later
+ * (eg. when a device is opened), and clk_enable when the clock is actually
+ * required (eg. from an interrupt). Note that clk_prepare MUST have been
+ * called before clk_enable.
+ */
+struct clk_ops {
+	int		(*prepare)(struct clk_hw *hw);
+	void		(*unprepare)(struct clk_hw *hw);
+	int		(*enable)(struct clk_hw *hw);
+	void		(*disable)(struct clk_hw *hw);
+	int		(*is_enabled)(struct clk_hw *hw);
+	unsigned long	(*recalc_rate)(struct clk_hw *hw,
+					unsigned long parent_rate);
+	long		(*round_rate)(struct clk_hw *hw, unsigned long,
+					unsigned long *);
+	int		(*set_parent)(struct clk_hw *hw, u8 index);
+	u8		(*get_parent)(struct clk_hw *hw);
+	int		(*set_rate)(struct clk_hw *hw, unsigned long);
+	void		(*init)(struct clk_hw *hw);
+};
+
+/*
+ * DOC: Basic clock implementations common to many platforms
+ *
+ * Each basic clock hardware type is comprised of a structure describing the
+ * clock hardware, implementations of the relevant callbacks in struct clk_ops,
+ * unique flags for that hardware type, a registration function and an
+ * alternative macro for static initialization
+ */
+
+/**
+ * struct clk_fixed_rate - fixed-rate clock
+ * @hw:		handle between common and hardware-specific interfaces
+ * @fixed_rate:	constant frequency of clock
+ */
+struct clk_fixed_rate {
+	struct		clk_hw hw;
+	unsigned long	fixed_rate;
+	u8		flags;
+};
+
+struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
+		const char *parent_name, unsigned long flags,
+		unsigned long fixed_rate);
+
+/**
+ * struct clk_gate - gating clock
+ *
+ * @hw:		handle between common and hardware-specific interfaces
+ * @reg:	register controlling gate
+ * @bit_idx:	single bit controlling gate
+ * @flags:	hardware-specific flags
+ * @lock:	register lock
+ *
+ * Clock which can gate its output.  Implements .enable & .disable
+ *
+ * Flags:
+ * CLK_GATE_SET_DISABLE - by default this clock sets the bit at bit_idx to
+ * 	enable the clock.  Setting this flag does the opposite: setting the bit
+ * 	disable the clock and clearing it enables the clock
+ */
+struct clk_gate {
+	struct clk_hw hw;
+	void __iomem	*reg;
+	u8		bit_idx;
+	u8		flags;
+	spinlock_t	*lock;
+	char		*parent[1];
+};
+
+#define CLK_GATE_SET_TO_DISABLE		BIT(0)
+
+struct clk *clk_register_gate(struct device *dev, const char *name,
+		const char *parent_name, unsigned long flags,
+		void __iomem *reg, u8 bit_idx,
+		u8 clk_gate_flags, spinlock_t *lock);
+
+/**
+ * struct clk_divider - adjustable divider clock
+ *
+ * @hw:		handle between common and hardware-specific interfaces
+ * @reg:	register containing the divider
+ * @shift:	shift to the divider bit field
+ * @width:	width of the divider bit field
+ * @lock:	register lock
+ *
+ * Clock with an adjustable divider affecting its output frequency.  Implements
+ * .recalc_rate, .set_rate and .round_rate
+ *
+ * Flags:
+ * CLK_DIVIDER_ONE_BASED - by default the divisor is the value read from the
+ * 	register plus one.  If CLK_DIVIDER_ONE_BASED is set then the divider is
+ * 	the raw value read from the register, with the value of zero considered
+ * 	invalid
+ * CLK_DIVIDER_POWER_OF_TWO - clock divisor is 2 raised to the value read from
+ * 	the hardware register
+ */
+struct clk_divider {
+	struct clk_hw	hw;
+	void __iomem	*reg;
+	u8		shift;
+	u8		width;
+	u8		flags;
+	spinlock_t	*lock;
+	char		*parent[1];
+};
+
+#define CLK_DIVIDER_ONE_BASED		BIT(0)
+#define CLK_DIVIDER_POWER_OF_TWO	BIT(1)
+
+struct clk *clk_register_divider(struct device *dev, const char *name,
+		const char *parent_name, unsigned long flags,
+		void __iomem *reg, u8 shift, u8 width,
+		u8 clk_divider_flags, spinlock_t *lock);
+
+/**
+ * struct clk_mux - multiplexer clock
+ *
+ * @hw:		handle between common and hardware-specific interfaces
+ * @reg:	register controlling multiplexer
+ * @shift:	shift to multiplexer bit field
+ * @width:	width of mutliplexer bit field
+ * @num_clks:	number of parent clocks
+ * @lock:	register lock
+ *
+ * Clock with multiple selectable parents.  Implements .get_parent, .set_parent
+ * and .recalc_rate
+ *
+ * Flags:
+ * CLK_MUX_INDEX_ONE - register index starts at 1, not 0
+ * CLK_MUX_INDEX_BITWISE - register index is a single bit (power of two)
+ */
+struct clk_mux {
+	struct clk_hw	hw;
+	void __iomem	*reg;
+	u8		shift;
+	u8		width;
+	u8		flags;
+	spinlock_t	*lock;
+};
+
+#define CLK_MUX_INDEX_ONE		BIT(0)
+#define CLK_MUX_INDEX_BIT		BIT(1)
+
+struct clk *clk_register_mux(struct device *dev, const char *name,
+		char **parent_names, u8 num_parents, unsigned long flags,
+		void __iomem *reg, u8 shift, u8 width,
+		u8 clk_mux_flags, spinlock_t *lock);
+
+/**
+ * clk_register - allocate a new clock, register it and return an opaque cookie
+ * @dev: device that is registering this clock
+ * @name: clock name
+ * @ops: operations this clock supports
+ * @hw: link to hardware-specific clock data
+ * @parent_names: array of string names for all possible parents
+ * @num_parents: number of possible parents
+ * @flags: framework-level hints and quirks
+ *
+ * clk_register is the primary interface for populating the clock tree with new
+ * clock nodes.  It returns a pointer to the newly allocated struct clk which
+ * cannot be dereferenced by driver code but may be used in conjuction with the
+ * rest of the clock API.
+ */
+struct clk *clk_register(struct device *dev, const char *name,
+		const struct clk_ops *ops, struct clk_hw *hw,
+		char **parent_names, u8 num_parents, unsigned long flags);
+
+/* helper functions */
+const char *__clk_get_name(struct clk *clk);
+struct clk_hw *__clk_get_hw(struct clk *clk);
+u8 __clk_get_num_parents(struct clk *clk);
+struct clk *__clk_get_parent(struct clk *clk);
+inline int __clk_get_enable_count(struct clk *clk);
+inline int __clk_get_prepare_count(struct clk *clk);
+unsigned long __clk_get_rate(struct clk *clk);
+unsigned long __clk_get_flags(struct clk *clk);
+int __clk_is_enabled(struct clk *clk);
+struct clk *__clk_lookup(const char *name);
+
+/*
+ * FIXME clock api without lock protection
+ */
+int __clk_prepare(struct clk *clk);
+void __clk_unprepare(struct clk *clk);
+void __clk_reparent(struct clk *clk, struct clk *new_parent);
+unsigned long __clk_round_rate(struct clk *clk, unsigned long rate);
+
+#endif /* CONFIG_COMMON_CLK */
+#endif /* CLK_PROVIDER_H */
diff --git a/include/linux/clk.h b/include/linux/clk.h
new file mode 100644
index 00000000..b0252726
--- /dev/null
+++ b/include/linux/clk.h
@@ -0,0 +1,281 @@
+/*
+ *  linux/include/linux/clk.h
+ *
+ *  Copyright (C) 2004 ARM Limited.
+ *  Written by Deep Blue Solutions Limited.
+ *  Copyright (C) 2011-2012 Linaro Ltd <mturquette@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __LINUX_CLK_H
+#define __LINUX_CLK_H
+
+#include <linux/kernel.h>
+#include <linux/notifier.h>
+
+struct device;
+
+struct clk;
+
+#ifdef CONFIG_COMMON_CLK
+
+/**
+ * DOC: clk notifier callback types
+ *
+ * PRE_RATE_CHANGE - called immediately before the clk rate is changed,
+ *     to indicate that the rate change will proceed.  Drivers must
+ *     immediately terminate any operations that will be affected by the
+ *     rate change.  Callbacks may either return NOTIFY_DONE or
+ *     NOTIFY_STOP.
+ *
+ * ABORT_RATE_CHANGE: called if the rate change failed for some reason
+ *     after PRE_RATE_CHANGE.  In this case, all registered notifiers on
+ *     the clk will be called with ABORT_RATE_CHANGE. Callbacks must
+ *     always return NOTIFY_DONE.
+ *
+ * POST_RATE_CHANGE - called after the clk rate change has successfully
+ *     completed.  Callbacks must always return NOTIFY_DONE.
+ *
+ */
+#define PRE_RATE_CHANGE			BIT(0)
+#define POST_RATE_CHANGE		BIT(1)
+#define ABORT_RATE_CHANGE		BIT(2)
+
+/**
+ * struct clk_notifier - associate a clk with a notifier
+ * @clk: struct clk * to associate the notifier with
+ * @notifier_head: a blocking_notifier_head for this clk
+ * @node: linked list pointers
+ *
+ * A list of struct clk_notifier is maintained by the notifier code.
+ * An entry is created whenever code registers the first notifier on a
+ * particular @clk.  Future notifiers on that @clk are added to the
+ * @notifier_head.
+ */
+struct clk_notifier {
+	struct clk			*clk;
+	struct srcu_notifier_head	notifier_head;
+	struct list_head		node;
+};
+
+/**
+ * struct clk_notifier_data - rate data to pass to the notifier callback
+ * @clk: struct clk * being changed
+ * @old_rate: previous rate of this clk
+ * @new_rate: new rate of this clk
+ *
+ * For a pre-notifier, old_rate is the clk's rate before this rate
+ * change, and new_rate is what the rate will be in the future.  For a
+ * post-notifier, old_rate and new_rate are both set to the clk's
+ * current rate (this was done to optimize the implementation).
+ */
+struct clk_notifier_data {
+	struct clk		*clk;
+	unsigned long		old_rate;
+	unsigned long		new_rate;
+};
+
+int clk_notifier_register(struct clk *clk, struct notifier_block *nb);
+
+int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb);
+
+#endif /* !CONFIG_COMMON_CLK */
+
+/**
+ * clk_get - lookup and obtain a reference to a clock producer.
+ * @dev: device for clock "consumer"
+ * @id: clock comsumer ID
+ *
+ * Returns a struct clk corresponding to the clock producer, or
+ * valid IS_ERR() condition containing errno.  The implementation
+ * uses @dev and @id to determine the clock consumer, and thereby
+ * the clock producer.  (IOW, @id may be identical strings, but
+ * clk_get may return different clock producers depending on @dev.)
+ *
+ * Drivers must assume that the clock source is not enabled.
+ *
+ * clk_get should not be called from within interrupt context.
+ */
+struct clk *clk_get(struct device *dev, const char *id);
+
+/**
+ * clk_prepare - prepare a clock source
+ * @clk: clock source
+ *
+ * This prepares the clock source for use.
+ *
+ * Must not be called from within atomic context.
+ */
+#ifdef CONFIG_HAVE_CLK_PREPARE
+int clk_prepare(struct clk *clk);
+#else
+static inline int clk_prepare(struct clk *clk)
+{
+	might_sleep();
+	return 0;
+}
+#endif
+
+/**
+ * clk_enable - inform the system when the clock source should be running.
+ * @clk: clock source
+ *
+ * If the clock can not be enabled/disabled, this should return success.
+ *
+ * May be called from atomic contexts.
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_enable(struct clk *clk);
+
+/**
+ * clk_disable - inform the system when the clock source is no longer required.
+ * @clk: clock source
+ *
+ * Inform the system that a clock source is no longer required by
+ * a driver and may be shut down.
+ *
+ * May be called from atomic contexts.
+ *
+ * Implementation detail: if the clock source is shared between
+ * multiple drivers, clk_enable() calls must be balanced by the
+ * same number of clk_disable() calls for the clock source to be
+ * disabled.
+ */
+void clk_disable(struct clk *clk);
+
+
+/**
+ * clk_unprepare - undo preparation of a clock source
+ * @clk: clock source
+ *
+ * This undoes a previously prepared clock.  The caller must balance
+ * the number of prepare and unprepare calls.
+ *
+ * Must not be called from within atomic context.
+ */
+#ifdef CONFIG_HAVE_CLK_PREPARE
+void clk_unprepare(struct clk *clk);
+#else
+static inline void clk_unprepare(struct clk *clk)
+{
+	might_sleep();
+}
+#endif
+
+/* clk_prepare_enable helps cases using clk_enable in non-atomic context. */
+static inline int clk_prepare_enable(struct clk *clk)
+{
+	int ret;
+
+	ret = clk_prepare(clk);
+	if (ret)
+		return ret;
+	ret = clk_enable(clk);
+	if (ret)
+		clk_unprepare(clk);
+
+	return ret;
+}
+
+/* clk_disable_unprepare helps cases using clk_disable in non-atomic context. */
+static inline void clk_disable_unprepare(struct clk *clk)
+{
+	clk_disable(clk);
+	clk_unprepare(clk);
+}
+
+/**
+ * clk_get_rate - obtain the current clock rate (in Hz) for a clock source.
+ *		  This is only valid once the clock source has been enabled.
+ * @clk: clock source
+ */
+unsigned long clk_get_rate(struct clk *clk);
+
+/**
+ * clk_put	- "free" the clock source
+ * @clk: clock source
+ *
+ * Note: drivers must ensure that all clk_enable calls made on this
+ * clock source are balanced by clk_disable calls prior to calling
+ * this function.
+ *
+ * clk_put should not be called from within interrupt context.
+ */
+void clk_put(struct clk *clk);
+
+
+/*
+ * The remaining APIs are optional for machine class support.
+ */
+
+
+/**
+ * clk_round_rate - adjust a rate to the exact rate a clock can provide
+ * @clk: clock source
+ * @rate: desired clock rate in Hz
+ *
+ * Returns rounded clock rate in Hz, or negative errno.
+ */
+long clk_round_rate(struct clk *clk, unsigned long rate);
+ 
+/**
+ * clk_set_rate - set the clock rate for a clock source
+ * @clk: clock source
+ * @rate: desired clock rate in Hz
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_set_rate(struct clk *clk, unsigned long rate);
+ 
+/**
+ * clk_set_parent - set the parent clock source for this clock
+ * @clk: clock source
+ * @parent: parent clock source
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_set_parent(struct clk *clk, struct clk *parent);
+
+/**
+ * clk_get_parent - get the parent clock source for this clock
+ * @clk: clock source
+ *
+ * Returns struct clk corresponding to parent clock source, or
+ * valid IS_ERR() condition containing errno.
+ */
+struct clk *clk_get_parent(struct clk *clk);
+
+/**
+ * clk_get_sys - get a clock based upon the device name
+ * @dev_id: device name
+ * @con_id: connection ID
+ *
+ * Returns a struct clk corresponding to the clock producer, or
+ * valid IS_ERR() condition containing errno.  The implementation
+ * uses @dev_id and @con_id to determine the clock consumer, and
+ * thereby the clock producer. In contrast to clk_get() this function
+ * takes the device name instead of the device itself for identification.
+ *
+ * Drivers must assume that the clock source is not enabled.
+ *
+ * clk_get_sys should not be called from within interrupt context.
+ */
+struct clk *clk_get_sys(const char *dev_id, const char *con_id);
+
+/**
+ * clk_add_alias - add a new clock alias
+ * @alias: name for clock alias
+ * @alias_dev_name: device name
+ * @id: platform specific clock name
+ * @dev: device
+ *
+ * Allows using generic clock names for drivers by adding a new alias.
+ * Assumes clkdev, see clkdev.h for more info.
+ */
+int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
+			struct device *dev);
+
+#endif
diff --git a/include/linux/clkdev.h b/include/linux/clkdev.h
new file mode 100644
index 00000000..d9a4fd02
--- /dev/null
+++ b/include/linux/clkdev.h
@@ -0,0 +1,43 @@
+/*
+ *  include/linux/clkdev.h
+ *
+ *  Copyright (C) 2008 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Helper for the clk API to assist looking up a struct clk.
+ */
+#ifndef __CLKDEV_H
+#define __CLKDEV_H
+
+#include <asm/clkdev.h>
+
+struct clk;
+struct device;
+
+struct clk_lookup {
+	struct list_head	node;
+	const char		*dev_id;
+	const char		*con_id;
+	struct clk		*clk;
+};
+
+#define CLKDEV_INIT(d, n, c)	\
+	{			\
+		.dev_id = d,	\
+		.con_id = n,	\
+		.clk = c,	\
+	}
+
+struct clk_lookup *clkdev_alloc(struct clk *clk, const char *con_id,
+	const char *dev_fmt, ...);
+
+void clkdev_add(struct clk_lookup *cl);
+void clkdev_drop(struct clk_lookup *cl);
+
+void clkdev_add_table(struct clk_lookup *, size_t);
+int clk_add_alias(const char *, const char *, char *, struct device *);
+
+#endif
diff --git a/include/linux/clksrc-dbx500-prcmu.h b/include/linux/clksrc-dbx500-prcmu.h
new file mode 100644
index 00000000..4fb8119c
--- /dev/null
+++ b/include/linux/clksrc-dbx500-prcmu.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Mattias Wallin <mattias.wallin@stericsson.com>
+ *
+ */
+#ifndef __CLKSRC_DBX500_PRCMU_H
+#define __CLKSRC_DBX500_PRCMU_H
+
+#include <linux/init.h>
+#include <linux/io.h>
+
+#ifdef CONFIG_CLKSRC_DBX500_PRCMU
+void __init clksrc_dbx500_prcmu_init(void __iomem *base);
+#else
+static inline void __init clksrc_dbx500_prcmu_init(void __iomem *base) {}
+#endif
+
+#endif
diff --git a/include/linux/clockchips.h b/include/linux/clockchips.h
new file mode 100644
index 00000000..81e803e9
--- /dev/null
+++ b/include/linux/clockchips.h
@@ -0,0 +1,170 @@
+/*  linux/include/linux/clockchips.h
+ *
+ *  This file contains the structure definitions for clockchips.
+ *
+ *  If you are not a clockchip, or the time of day code, you should
+ *  not be including this file!
+ */
+#ifndef _LINUX_CLOCKCHIPS_H
+#define _LINUX_CLOCKCHIPS_H
+
+#ifdef CONFIG_GENERIC_CLOCKEVENTS_BUILD
+
+#include <linux/clocksource.h>
+#include <linux/cpumask.h>
+#include <linux/ktime.h>
+#include <linux/notifier.h>
+
+struct clock_event_device;
+
+/* Clock event mode commands */
+enum clock_event_mode {
+	CLOCK_EVT_MODE_UNUSED = 0,
+	CLOCK_EVT_MODE_SHUTDOWN,
+	CLOCK_EVT_MODE_PERIODIC,
+	CLOCK_EVT_MODE_ONESHOT,
+	CLOCK_EVT_MODE_RESUME,
+};
+
+/* Clock event notification values */
+enum clock_event_nofitiers {
+	CLOCK_EVT_NOTIFY_ADD,
+	CLOCK_EVT_NOTIFY_BROADCAST_ON,
+	CLOCK_EVT_NOTIFY_BROADCAST_OFF,
+	CLOCK_EVT_NOTIFY_BROADCAST_FORCE,
+	CLOCK_EVT_NOTIFY_BROADCAST_ENTER,
+	CLOCK_EVT_NOTIFY_BROADCAST_EXIT,
+	CLOCK_EVT_NOTIFY_SUSPEND,
+	CLOCK_EVT_NOTIFY_RESUME,
+	CLOCK_EVT_NOTIFY_CPU_DYING,
+	CLOCK_EVT_NOTIFY_CPU_DEAD,
+};
+
+/*
+ * Clock event features
+ */
+#define CLOCK_EVT_FEAT_PERIODIC		0x000001
+#define CLOCK_EVT_FEAT_ONESHOT		0x000002
+#define CLOCK_EVT_FEAT_KTIME		0x000004
+/*
+ * x86(64) specific misfeatures:
+ *
+ * - Clockevent source stops in C3 State and needs broadcast support.
+ * - Local APIC timer is used as a dummy device.
+ */
+#define CLOCK_EVT_FEAT_C3STOP		0x000008
+#define CLOCK_EVT_FEAT_DUMMY		0x000010
+
+/**
+ * struct clock_event_device - clock event device descriptor
+ * @event_handler:	Assigned by the framework to be called by the low
+ *			level handler of the event source
+ * @set_next_event:	set next event function using a clocksource delta
+ * @set_next_ktime:	set next event function using a direct ktime value
+ * @next_event:		local storage for the next event in oneshot mode
+ * @max_delta_ns:	maximum delta value in ns
+ * @min_delta_ns:	minimum delta value in ns
+ * @mult:		nanosecond to cycles multiplier
+ * @shift:		nanoseconds to cycles divisor (power of two)
+ * @mode:		operating mode assigned by the management code
+ * @features:		features
+ * @retries:		number of forced programming retries
+ * @set_mode:		set mode function
+ * @broadcast:		function to broadcast events
+ * @min_delta_ticks:	minimum delta value in ticks stored for reconfiguration
+ * @max_delta_ticks:	maximum delta value in ticks stored for reconfiguration
+ * @name:		ptr to clock event name
+ * @rating:		variable to rate clock event devices
+ * @irq:		IRQ number (only for non CPU local devices)
+ * @cpumask:		cpumask to indicate for which CPUs this device works
+ * @list:		list head for the management code
+ */
+struct clock_event_device {
+	void			(*event_handler)(struct clock_event_device *);
+	int			(*set_next_event)(unsigned long evt,
+						  struct clock_event_device *);
+	int			(*set_next_ktime)(ktime_t expires,
+						  struct clock_event_device *);
+	ktime_t			next_event;
+	u64			max_delta_ns;
+	u64			min_delta_ns;
+	u32			mult;
+	u32			shift;
+	enum clock_event_mode	mode;
+	unsigned int		features;
+	unsigned long		retries;
+
+	void			(*broadcast)(const struct cpumask *mask);
+	void			(*set_mode)(enum clock_event_mode mode,
+					    struct clock_event_device *);
+	unsigned long		min_delta_ticks;
+	unsigned long		max_delta_ticks;
+
+	const char		*name;
+	int			rating;
+	int			irq;
+	const struct cpumask	*cpumask;
+	struct list_head	list;
+} ____cacheline_aligned;
+
+/*
+ * Calculate a multiplication factor for scaled math, which is used to convert
+ * nanoseconds based values to clock ticks:
+ *
+ * clock_ticks = (nanoseconds * factor) >> shift.
+ *
+ * div_sc is the rearranged equation to calculate a factor from a given clock
+ * ticks / nanoseconds ratio:
+ *
+ * factor = (clock_ticks << shift) / nanoseconds
+ */
+static inline unsigned long div_sc(unsigned long ticks, unsigned long nsec,
+				   int shift)
+{
+	uint64_t tmp = ((uint64_t)ticks) << shift;
+
+	do_div(tmp, nsec);
+	return (unsigned long) tmp;
+}
+
+/* Clock event layer functions */
+extern u64 clockevent_delta2ns(unsigned long latch,
+			       struct clock_event_device *evt);
+extern void clockevents_register_device(struct clock_event_device *dev);
+
+extern void clockevents_config_and_register(struct clock_event_device *dev,
+					    u32 freq, unsigned long min_delta,
+					    unsigned long max_delta);
+
+extern int clockevents_update_freq(struct clock_event_device *ce, u32 freq);
+
+extern void clockevents_exchange_device(struct clock_event_device *old,
+					struct clock_event_device *new);
+extern void clockevents_set_mode(struct clock_event_device *dev,
+				 enum clock_event_mode mode);
+extern int clockevents_register_notifier(struct notifier_block *nb);
+extern int clockevents_program_event(struct clock_event_device *dev,
+				     ktime_t expires, bool force);
+
+extern void clockevents_handle_noop(struct clock_event_device *dev);
+
+static inline void
+clockevents_calc_mult_shift(struct clock_event_device *ce, u32 freq, u32 minsec)
+{
+	return clocks_calc_mult_shift(&ce->mult, &ce->shift, NSEC_PER_SEC,
+				      freq, minsec);
+}
+
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+extern void clockevents_notify(unsigned long reason, void *arg);
+#else
+# define clockevents_notify(reason, arg) do { } while (0)
+#endif
+
+#else /* CONFIG_GENERIC_CLOCKEVENTS_BUILD */
+
+#define clockevents_notify(reason, arg) do { } while (0)
+
+#endif
+
+#endif
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
new file mode 100644
index 00000000..fbe89e17
--- /dev/null
+++ b/include/linux/clocksource.h
@@ -0,0 +1,351 @@
+/*  linux/include/linux/clocksource.h
+ *
+ *  This file contains the structure definitions for clocksources.
+ *
+ *  If you are not a clocksource, or timekeeping code, you should
+ *  not be including this file!
+ */
+#ifndef _LINUX_CLOCKSOURCE_H
+#define _LINUX_CLOCKSOURCE_H
+
+#include <linux/types.h>
+#include <linux/timex.h>
+#include <linux/time.h>
+#include <linux/list.h>
+#include <linux/cache.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <asm/div64.h>
+#include <asm/io.h>
+
+/* clocksource cycle base type */
+typedef u64 cycle_t;
+struct clocksource;
+
+#ifdef CONFIG_ARCH_CLOCKSOURCE_DATA
+#include <asm/clocksource.h>
+#endif
+
+/**
+ * struct cyclecounter - hardware abstraction for a free running counter
+ *	Provides completely state-free accessors to the underlying hardware.
+ *	Depending on which hardware it reads, the cycle counter may wrap
+ *	around quickly. Locking rules (if necessary) have to be defined
+ *	by the implementor and user of specific instances of this API.
+ *
+ * @read:		returns the current cycle value
+ * @mask:		bitmask for two's complement
+ *			subtraction of non 64 bit counters,
+ *			see CLOCKSOURCE_MASK() helper macro
+ * @mult:		cycle to nanosecond multiplier
+ * @shift:		cycle to nanosecond divisor (power of two)
+ */
+struct cyclecounter {
+	cycle_t (*read)(const struct cyclecounter *cc);
+	cycle_t mask;
+	u32 mult;
+	u32 shift;
+};
+
+/**
+ * struct timecounter - layer above a %struct cyclecounter which counts nanoseconds
+ *	Contains the state needed by timecounter_read() to detect
+ *	cycle counter wrap around. Initialize with
+ *	timecounter_init(). Also used to convert cycle counts into the
+ *	corresponding nanosecond counts with timecounter_cyc2time(). Users
+ *	of this code are responsible for initializing the underlying
+ *	cycle counter hardware, locking issues and reading the time
+ *	more often than the cycle counter wraps around. The nanosecond
+ *	counter will only wrap around after ~585 years.
+ *
+ * @cc:			the cycle counter used by this instance
+ * @cycle_last:		most recent cycle counter value seen by
+ *			timecounter_read()
+ * @nsec:		continuously increasing count
+ */
+struct timecounter {
+	const struct cyclecounter *cc;
+	cycle_t cycle_last;
+	u64 nsec;
+};
+
+/**
+ * cyclecounter_cyc2ns - converts cycle counter cycles to nanoseconds
+ * @cc:		Pointer to cycle counter.
+ * @cycles:	Cycles
+ *
+ * XXX - This could use some mult_lxl_ll() asm optimization. Same code
+ * as in cyc2ns, but with unsigned result.
+ */
+static inline u64 cyclecounter_cyc2ns(const struct cyclecounter *cc,
+				      cycle_t cycles)
+{
+	u64 ret = (u64)cycles;
+	ret = (ret * cc->mult) >> cc->shift;
+	return ret;
+}
+
+/**
+ * timecounter_init - initialize a time counter
+ * @tc:			Pointer to time counter which is to be initialized/reset
+ * @cc:			A cycle counter, ready to be used.
+ * @start_tstamp:	Arbitrary initial time stamp.
+ *
+ * After this call the current cycle register (roughly) corresponds to
+ * the initial time stamp. Every call to timecounter_read() increments
+ * the time stamp counter by the number of elapsed nanoseconds.
+ */
+extern void timecounter_init(struct timecounter *tc,
+			     const struct cyclecounter *cc,
+			     u64 start_tstamp);
+
+/**
+ * timecounter_read - return nanoseconds elapsed since timecounter_init()
+ *                    plus the initial time stamp
+ * @tc:          Pointer to time counter.
+ *
+ * In other words, keeps track of time since the same epoch as
+ * the function which generated the initial time stamp.
+ */
+extern u64 timecounter_read(struct timecounter *tc);
+
+/**
+ * timecounter_cyc2time - convert a cycle counter to same
+ *                        time base as values returned by
+ *                        timecounter_read()
+ * @tc:		Pointer to time counter.
+ * @cycle_tstamp:	a value returned by tc->cc->read()
+ *
+ * Cycle counts that are converted correctly as long as they
+ * fall into the interval [-1/2 max cycle count, +1/2 max cycle count],
+ * with "max cycle count" == cs->mask+1.
+ *
+ * This allows conversion of cycle counter values which were generated
+ * in the past.
+ */
+extern u64 timecounter_cyc2time(struct timecounter *tc,
+				cycle_t cycle_tstamp);
+
+/**
+ * struct clocksource - hardware abstraction for a free running counter
+ *	Provides mostly state-free accessors to the underlying hardware.
+ *	This is the structure used for system time.
+ *
+ * @name:		ptr to clocksource name
+ * @list:		list head for registration
+ * @rating:		rating value for selection (higher is better)
+ *			To avoid rating inflation the following
+ *			list should give you a guide as to how
+ *			to assign your clocksource a rating
+ *			1-99: Unfit for real use
+ *				Only available for bootup and testing purposes.
+ *			100-199: Base level usability.
+ *				Functional for real use, but not desired.
+ *			200-299: Good.
+ *				A correct and usable clocksource.
+ *			300-399: Desired.
+ *				A reasonably fast and accurate clocksource.
+ *			400-499: Perfect
+ *				The ideal clocksource. A must-use where
+ *				available.
+ * @read:		returns a cycle value, passes clocksource as argument
+ * @enable:		optional function to enable the clocksource
+ * @disable:		optional function to disable the clocksource
+ * @mask:		bitmask for two's complement
+ *			subtraction of non 64 bit counters
+ * @mult:		cycle to nanosecond multiplier
+ * @shift:		cycle to nanosecond divisor (power of two)
+ * @max_idle_ns:	max idle time permitted by the clocksource (nsecs)
+ * @maxadj:		maximum adjustment value to mult (~11%)
+ * @flags:		flags describing special properties
+ * @archdata:		arch-specific data
+ * @suspend:		suspend function for the clocksource, if necessary
+ * @resume:		resume function for the clocksource, if necessary
+ * @cycle_last:		most recent cycle counter value seen by ::read()
+ */
+struct clocksource {
+	/*
+	 * Hotpath data, fits in a single cache line when the
+	 * clocksource itself is cacheline aligned.
+	 */
+	cycle_t (*read)(struct clocksource *cs);
+	cycle_t cycle_last;
+	cycle_t mask;
+	u32 mult;
+	u32 shift;
+	u64 max_idle_ns;
+	u32 maxadj;
+#ifdef CONFIG_ARCH_CLOCKSOURCE_DATA
+	struct arch_clocksource_data archdata;
+#endif
+
+	const char *name;
+	struct list_head list;
+	int rating;
+	int (*enable)(struct clocksource *cs);
+	void (*disable)(struct clocksource *cs);
+	unsigned long flags;
+	void (*suspend)(struct clocksource *cs);
+	void (*resume)(struct clocksource *cs);
+
+	/* private: */
+#ifdef CONFIG_CLOCKSOURCE_WATCHDOG
+	/* Watchdog related data, used by the framework */
+	struct list_head wd_list;
+	cycle_t cs_last;
+	cycle_t wd_last;
+#endif
+} ____cacheline_aligned;
+
+/*
+ * Clock source flags bits::
+ */
+#define CLOCK_SOURCE_IS_CONTINUOUS		0x01
+#define CLOCK_SOURCE_MUST_VERIFY		0x02
+
+#define CLOCK_SOURCE_WATCHDOG			0x10
+#define CLOCK_SOURCE_VALID_FOR_HRES		0x20
+#define CLOCK_SOURCE_UNSTABLE			0x40
+
+/* simplify initialization of mask field */
+#define CLOCKSOURCE_MASK(bits) (cycle_t)((bits) < 64 ? ((1ULL<<(bits))-1) : -1)
+
+/**
+ * clocksource_khz2mult - calculates mult from khz and shift
+ * @khz:		Clocksource frequency in KHz
+ * @shift_constant:	Clocksource shift factor
+ *
+ * Helper functions that converts a khz counter frequency to a timsource
+ * multiplier, given the clocksource shift value
+ */
+static inline u32 clocksource_khz2mult(u32 khz, u32 shift_constant)
+{
+	/*  khz = cyc/(Million ns)
+	 *  mult/2^shift  = ns/cyc
+	 *  mult = ns/cyc * 2^shift
+	 *  mult = 1Million/khz * 2^shift
+	 *  mult = 1000000 * 2^shift / khz
+	 *  mult = (1000000<<shift) / khz
+	 */
+	u64 tmp = ((u64)1000000) << shift_constant;
+
+	tmp += khz/2; /* round for do_div */
+	do_div(tmp, khz);
+
+	return (u32)tmp;
+}
+
+/**
+ * clocksource_hz2mult - calculates mult from hz and shift
+ * @hz:			Clocksource frequency in Hz
+ * @shift_constant:	Clocksource shift factor
+ *
+ * Helper functions that converts a hz counter
+ * frequency to a timsource multiplier, given the
+ * clocksource shift value
+ */
+static inline u32 clocksource_hz2mult(u32 hz, u32 shift_constant)
+{
+	/*  hz = cyc/(Billion ns)
+	 *  mult/2^shift  = ns/cyc
+	 *  mult = ns/cyc * 2^shift
+	 *  mult = 1Billion/hz * 2^shift
+	 *  mult = 1000000000 * 2^shift / hz
+	 *  mult = (1000000000<<shift) / hz
+	 */
+	u64 tmp = ((u64)1000000000) << shift_constant;
+
+	tmp += hz/2; /* round for do_div */
+	do_div(tmp, hz);
+
+	return (u32)tmp;
+}
+
+/**
+ * clocksource_cyc2ns - converts clocksource cycles to nanoseconds
+ * @cycles:	cycles
+ * @mult:	cycle to nanosecond multiplier
+ * @shift:	cycle to nanosecond divisor (power of two)
+ *
+ * Converts cycles to nanoseconds, using the given mult and shift.
+ *
+ * XXX - This could use some mult_lxl_ll() asm optimization
+ */
+static inline s64 clocksource_cyc2ns(cycle_t cycles, u32 mult, u32 shift)
+{
+	return ((u64) cycles * mult) >> shift;
+}
+
+
+extern int clocksource_register(struct clocksource*);
+extern void clocksource_unregister(struct clocksource*);
+extern void clocksource_touch_watchdog(void);
+extern struct clocksource* clocksource_get_next(void);
+extern void clocksource_change_rating(struct clocksource *cs, int rating);
+extern void clocksource_suspend(void);
+extern void clocksource_resume(void);
+extern struct clocksource * __init __weak clocksource_default_clock(void);
+extern void clocksource_mark_unstable(struct clocksource *cs);
+
+extern void
+clocks_calc_mult_shift(u32 *mult, u32 *shift, u32 from, u32 to, u32 minsec);
+
+/*
+ * Don't call __clocksource_register_scale directly, use
+ * clocksource_register_hz/khz
+ */
+extern int
+__clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq);
+extern void
+__clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq);
+
+static inline int clocksource_register_hz(struct clocksource *cs, u32 hz)
+{
+	return __clocksource_register_scale(cs, 1, hz);
+}
+
+static inline int clocksource_register_khz(struct clocksource *cs, u32 khz)
+{
+	return __clocksource_register_scale(cs, 1000, khz);
+}
+
+static inline void __clocksource_updatefreq_hz(struct clocksource *cs, u32 hz)
+{
+	__clocksource_updatefreq_scale(cs, 1, hz);
+}
+
+static inline void __clocksource_updatefreq_khz(struct clocksource *cs, u32 khz)
+{
+	__clocksource_updatefreq_scale(cs, 1000, khz);
+}
+
+#ifdef CONFIG_GENERIC_TIME_VSYSCALL
+extern void
+update_vsyscall(struct timespec *ts, struct timespec *wtm,
+			struct clocksource *c, u32 mult);
+extern void update_vsyscall_tz(void);
+#else
+static inline void
+update_vsyscall(struct timespec *ts, struct timespec *wtm,
+			struct clocksource *c, u32 mult)
+{
+}
+
+static inline void update_vsyscall_tz(void)
+{
+}
+#endif
+
+extern void timekeeping_notify(struct clocksource *clock);
+
+extern cycle_t clocksource_mmio_readl_up(struct clocksource *);
+extern cycle_t clocksource_mmio_readl_down(struct clocksource *);
+extern cycle_t clocksource_mmio_readw_up(struct clocksource *);
+extern cycle_t clocksource_mmio_readw_down(struct clocksource *);
+
+extern int clocksource_mmio_init(void __iomem *, const char *,
+	unsigned long, int, unsigned, cycle_t (*)(struct clocksource *));
+
+extern int clocksource_i8253_init(void);
+
+#endif /* _LINUX_CLOCKSOURCE_H */
diff --git a/include/linux/cm4000_cs.h b/include/linux/cm4000_cs.h
new file mode 100644
index 00000000..3c4aac40
--- /dev/null
+++ b/include/linux/cm4000_cs.h
@@ -0,0 +1,68 @@
+#ifndef	_CM4000_H_
+#define	_CM4000_H_
+
+#include <linux/types.h>
+
+#define	MAX_ATR			33
+
+#define	CM4000_MAX_DEV		4
+
+/* those two structures are passed via ioctl() from/to userspace.  They are
+ * used by existing userspace programs, so I kepth the awkward "bIFSD" naming
+ * not to break compilation of userspace apps. -HW */
+
+typedef struct atreq {
+	__s32 atr_len;
+	unsigned char atr[64];
+	__s32 power_act;
+	unsigned char bIFSD;
+	unsigned char bIFSC;
+} atreq_t;
+
+
+/* what is particularly stupid in the original driver is the arch-dependent
+ * member sizes. This leads to CONFIG_COMPAT breakage, since 32bit userspace
+ * will lay out the structure members differently than the 64bit kernel.
+ *
+ * I've changed "ptsreq.protocol" from "unsigned long" to "__u32".
+ * On 32bit this will make no difference.  With 64bit kernels, it will make
+ * 32bit apps work, too.
+ */
+
+typedef struct ptsreq {
+	__u32 protocol; /*T=0: 2^0, T=1:  2^1*/
+ 	unsigned char flags;
+ 	unsigned char pts1;
+ 	unsigned char pts2;
+	unsigned char pts3;
+} ptsreq_t;
+
+#define	CM_IOC_MAGIC		'c'
+#define	CM_IOC_MAXNR	        255
+
+#define	CM_IOCGSTATUS		_IOR (CM_IOC_MAGIC, 0, unsigned char *)
+#define	CM_IOCGATR		_IOWR(CM_IOC_MAGIC, 1, atreq_t *)
+#define	CM_IOCSPTS		_IOW (CM_IOC_MAGIC, 2, ptsreq_t *)
+#define	CM_IOCSRDR		_IO  (CM_IOC_MAGIC, 3)
+#define CM_IOCARDOFF            _IO  (CM_IOC_MAGIC, 4)
+
+#define CM_IOSDBGLVL            _IOW(CM_IOC_MAGIC, 250, int*)
+
+/* card and device states */
+#define	CM_CARD_INSERTED		0x01
+#define	CM_CARD_POWERED			0x02
+#define	CM_ATR_PRESENT			0x04
+#define	CM_ATR_VALID	 		0x08
+#define	CM_STATE_VALID			0x0f
+/* extra info only from CM4000 */
+#define	CM_NO_READER			0x10
+#define	CM_BAD_CARD			0x20
+
+
+#ifdef __KERNEL__
+
+#define	DEVICE_NAME		"cmm"
+#define	MODULE_NAME		"cm4000_cs"
+
+#endif	/* __KERNEL__ */
+#endif	/* _CM4000_H_ */
diff --git a/include/linux/cn_proc.h b/include/linux/cn_proc.h
new file mode 100644
index 00000000..d03612b1
--- /dev/null
+++ b/include/linux/cn_proc.h
@@ -0,0 +1,155 @@
+/*
+ * cn_proc.h - process events connector
+ *
+ * Copyright (C) Matt Helsley, IBM Corp. 2005
+ * Based on cn_fork.h by Nguyen Anh Quynh and Guillaume Thouvenin
+ * Copyright (C) 2005 Nguyen Anh Quynh <aquynh@gmail.com>
+ * Copyright (C) 2005 Guillaume Thouvenin <guillaume.thouvenin@bull.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef CN_PROC_H
+#define CN_PROC_H
+
+#include <linux/types.h>
+
+/*
+ * Userspace sends this enum to register with the kernel that it is listening
+ * for events on the connector.
+ */
+enum proc_cn_mcast_op {
+	PROC_CN_MCAST_LISTEN = 1,
+	PROC_CN_MCAST_IGNORE = 2
+};
+
+/*
+ * From the user's point of view, the process
+ * ID is the thread group ID and thread ID is the internal
+ * kernel "pid". So, fields are assigned as follow:
+ *
+ *  In user space     -  In  kernel space
+ *
+ * parent process ID  =  parent->tgid
+ * parent thread  ID  =  parent->pid
+ * child  process ID  =  child->tgid
+ * child  thread  ID  =  child->pid
+ */
+
+struct proc_event {
+	enum what {
+		/* Use successive bits so the enums can be used to record
+		 * sets of events as well
+		 */
+		PROC_EVENT_NONE = 0x00000000,
+		PROC_EVENT_FORK = 0x00000001,
+		PROC_EVENT_EXEC = 0x00000002,
+		PROC_EVENT_UID  = 0x00000004,
+		PROC_EVENT_GID  = 0x00000040,
+		PROC_EVENT_SID  = 0x00000080,
+		PROC_EVENT_PTRACE = 0x00000100,
+		PROC_EVENT_COMM = 0x00000200,
+		/* "next" should be 0x00000400 */
+		/* "last" is the last process event: exit */
+		PROC_EVENT_EXIT = 0x80000000
+	} what;
+	__u32 cpu;
+	__u64 __attribute__((aligned(8))) timestamp_ns;
+		/* Number of nano seconds since system boot */
+	union { /* must be last field of proc_event struct */
+		struct {
+			__u32 err;
+		} ack;
+
+		struct fork_proc_event {
+			__kernel_pid_t parent_pid;
+			__kernel_pid_t parent_tgid;
+			__kernel_pid_t child_pid;
+			__kernel_pid_t child_tgid;
+		} fork;
+
+		struct exec_proc_event {
+			__kernel_pid_t process_pid;
+			__kernel_pid_t process_tgid;
+		} exec;
+
+		struct id_proc_event {
+			__kernel_pid_t process_pid;
+			__kernel_pid_t process_tgid;
+			union {
+				__u32 ruid; /* task uid */
+				__u32 rgid; /* task gid */
+			} r;
+			union {
+				__u32 euid;
+				__u32 egid;
+			} e;
+		} id;
+
+		struct sid_proc_event {
+			__kernel_pid_t process_pid;
+			__kernel_pid_t process_tgid;
+		} sid;
+
+		struct ptrace_proc_event {
+			__kernel_pid_t process_pid;
+			__kernel_pid_t process_tgid;
+			__kernel_pid_t tracer_pid;
+			__kernel_pid_t tracer_tgid;
+		} ptrace;
+
+		struct comm_proc_event {
+			__kernel_pid_t process_pid;
+			__kernel_pid_t process_tgid;
+			char           comm[16];
+		} comm;
+
+		struct exit_proc_event {
+			__kernel_pid_t process_pid;
+			__kernel_pid_t process_tgid;
+			__u32 exit_code, exit_signal;
+		} exit;
+	} event_data;
+};
+
+#ifdef __KERNEL__
+#ifdef CONFIG_PROC_EVENTS
+void proc_fork_connector(struct task_struct *task);
+void proc_exec_connector(struct task_struct *task);
+void proc_id_connector(struct task_struct *task, int which_id);
+void proc_sid_connector(struct task_struct *task);
+void proc_ptrace_connector(struct task_struct *task, int which_id);
+void proc_comm_connector(struct task_struct *task);
+void proc_exit_connector(struct task_struct *task);
+#else
+static inline void proc_fork_connector(struct task_struct *task)
+{}
+
+static inline void proc_exec_connector(struct task_struct *task)
+{}
+
+static inline void proc_id_connector(struct task_struct *task,
+				     int which_id)
+{}
+
+static inline void proc_sid_connector(struct task_struct *task)
+{}
+
+static inline void proc_comm_connector(struct task_struct *task)
+{}
+
+static inline void proc_ptrace_connector(struct task_struct *task,
+					 int ptrace_id)
+{}
+
+static inline void proc_exit_connector(struct task_struct *task)
+{}
+#endif	/* CONFIG_PROC_EVENTS */
+#endif	/* __KERNEL__ */
+#endif	/* CN_PROC_H */
diff --git a/include/linux/cnt32_to_63.h b/include/linux/cnt32_to_63.h
new file mode 100644
index 00000000..aa629bce
--- /dev/null
+++ b/include/linux/cnt32_to_63.h
@@ -0,0 +1,107 @@
+/*
+ *  Extend a 32-bit counter to 63 bits
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	December 3, 2006
+ *  Copyright:	MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_CNT32_TO_63_H__
+#define __LINUX_CNT32_TO_63_H__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/* this is used only to give gcc a clue about good code generation */
+union cnt32_to_63 {
+	struct {
+#if defined(__LITTLE_ENDIAN)
+		u32 lo, hi;
+#elif defined(__BIG_ENDIAN)
+		u32 hi, lo;
+#endif
+	};
+	u64 val;
+};
+
+
+/**
+ * cnt32_to_63 - Expand a 32-bit counter to a 63-bit counter
+ * @cnt_lo: The low part of the counter
+ *
+ * Many hardware clock counters are only 32 bits wide and therefore have
+ * a relatively short period making wrap-arounds rather frequent.  This
+ * is a problem when implementing sched_clock() for example, where a 64-bit
+ * non-wrapping monotonic value is expected to be returned.
+ *
+ * To overcome that limitation, let's extend a 32-bit counter to 63 bits
+ * in a completely lock free fashion. Bits 0 to 31 of the clock are provided
+ * by the hardware while bits 32 to 62 are stored in memory.  The top bit in
+ * memory is used to synchronize with the hardware clock half-period.  When
+ * the top bit of both counters (hardware and in memory) differ then the
+ * memory is updated with a new value, incrementing it when the hardware
+ * counter wraps around.
+ *
+ * Because a word store in memory is atomic then the incremented value will
+ * always be in synch with the top bit indicating to any potential concurrent
+ * reader if the value in memory is up to date or not with regards to the
+ * needed increment.  And any race in updating the value in memory is harmless
+ * as the same value would simply be stored more than once.
+ *
+ * The restrictions for the algorithm to work properly are:
+ *
+ * 1) this code must be called at least once per each half period of the
+ *    32-bit counter;
+ *
+ * 2) this code must not be preempted for a duration longer than the
+ *    32-bit counter half period minus the longest period between two
+ *    calls to this code;
+ *
+ * Those requirements ensure proper update to the state bit in memory.
+ * This is usually not a problem in practice, but if it is then a kernel
+ * timer should be scheduled to manage for this code to be executed often
+ * enough.
+ *
+ * And finally:
+ *
+ * 3) the cnt_lo argument must be seen as a globally incrementing value,
+ *    meaning that it should be a direct reference to the counter data which
+ *    can be evaluated according to a specific ordering within the macro,
+ *    and not the result of a previous evaluation stored in a variable.
+ *
+ * For example, this is wrong:
+ *
+ *	u32 partial = get_hw_count();
+ *	u64 full = cnt32_to_63(partial);
+ *	return full;
+ *
+ * This is fine:
+ *
+ *	u64 full = cnt32_to_63(get_hw_count());
+ *	return full;
+ *
+ * Note that the top bit (bit 63) in the returned value should be considered
+ * as garbage.  It is not cleared here because callers are likely to use a
+ * multiplier on the returned value which can get rid of the top bit
+ * implicitly by making the multiplier even, therefore saving on a runtime
+ * clear-bit instruction. Otherwise caller must remember to clear the top
+ * bit explicitly.
+ */
+#define cnt32_to_63(cnt_lo) \
+({ \
+	static u32 __m_cnt_hi; \
+	union cnt32_to_63 __x; \
+	__x.hi = __m_cnt_hi; \
+ 	smp_rmb(); \
+	__x.lo = (cnt_lo); \
+	if (unlikely((s32)(__x.hi ^ __x.lo) < 0)) \
+		__m_cnt_hi = __x.hi = (__x.hi ^ 0x80000000) + (__x.hi >> 31); \
+	__x.val; \
+})
+
+#endif
diff --git a/include/linux/coda.h b/include/linux/coda.h
new file mode 100644
index 00000000..96c87693
--- /dev/null
+++ b/include/linux/coda.h
@@ -0,0 +1,744 @@
+/* 
+   You may distribute this file under either of the two licenses that
+   follow at your discretion.
+*/
+
+/* BLURB lgpl
+
+                           Coda File System
+                              Release 5
+
+          Copyright (c) 1987-1999 Carnegie Mellon University
+                  Additional copyrights listed below
+
+This code is distributed "AS IS" without warranty of any kind under
+the terms of the GNU Library General Public Licence Version 2, as
+shown in the file LICENSE, or under the license shown below. The
+technical and financial contributors to Coda are listed in the file
+CREDITS.
+
+                        Additional copyrights 
+*/
+
+/*
+
+            Coda: an Experimental Distributed File System
+                             Release 4.0
+
+          Copyright (c) 1987-1999 Carnegie Mellon University
+                         All Rights Reserved
+
+Permission  to  use, copy, modify and distribute this software and its
+documentation is hereby granted,  provided  that  both  the  copyright
+notice  and  this  permission  notice  appear  in  all  copies  of the
+software, derivative works or  modified  versions,  and  any  portions
+thereof, and that both notices appear in supporting documentation, and
+that credit is given to Carnegie Mellon University  in  all  documents
+and publicity pertaining to direct or indirect use of this code or its
+derivatives.
+
+CODA IS AN EXPERIMENTAL SOFTWARE SYSTEM AND IS  KNOWN  TO  HAVE  BUGS,
+SOME  OF  WHICH MAY HAVE SERIOUS CONSEQUENCES.  CARNEGIE MELLON ALLOWS
+FREE USE OF THIS SOFTWARE IN ITS "AS IS" CONDITION.   CARNEGIE  MELLON
+DISCLAIMS  ANY  LIABILITY  OF  ANY  KIND  FOR  ANY  DAMAGES WHATSOEVER
+RESULTING DIRECTLY OR INDIRECTLY FROM THE USE OF THIS SOFTWARE  OR  OF
+ANY DERIVATIVE WORK.
+
+Carnegie  Mellon  encourages  users  of  this  software  to return any
+improvements or extensions that  they  make,  and  to  grant  Carnegie
+Mellon the rights to redistribute these changes without encumbrance.
+*/
+
+/*
+ *
+ * Based on cfs.h from Mach, but revamped for increased simplicity.
+ * Linux modifications by 
+ * Peter Braam, Aug 1996
+ */
+
+#ifndef _CODA_HEADER_
+#define _CODA_HEADER_
+
+
+/* Catch new _KERNEL defn for NetBSD and DJGPP/__CYGWIN32__ */
+#if defined(__NetBSD__) || \
+  ((defined(DJGPP) || defined(__CYGWIN32__)) && !defined(KERNEL))
+#include <sys/types.h>
+#endif 
+
+#ifndef CODA_MAXSYMLINKS
+#define CODA_MAXSYMLINKS 10
+#endif
+
+#if defined(DJGPP) || defined(__CYGWIN32__)
+#ifdef KERNEL
+typedef unsigned long u_long;
+typedef unsigned int u_int;
+typedef unsigned short u_short;
+typedef u_long ino_t;
+typedef u_long dev_t;
+typedef void * caddr_t;
+#ifdef DOS
+typedef unsigned __int64 u_quad_t;
+#else 
+typedef unsigned long long u_quad_t;
+#endif
+
+#define inline
+
+struct timespec {
+        long       ts_sec;
+        long       ts_nsec;
+};
+#else  /* DJGPP but not KERNEL */
+#include <sys/time.h>
+typedef unsigned long long u_quad_t;
+#endif /* !KERNEL */
+#endif /* !DJGPP */
+
+
+#if defined(__linux__)
+#include <linux/time.h>
+#define cdev_t u_quad_t
+#ifndef __KERNEL__
+#if !defined(_UQUAD_T_) && (!defined(__GLIBC__) || __GLIBC__ < 2)
+#define _UQUAD_T_ 1
+typedef unsigned long long u_quad_t;
+#endif
+#else /*__KERNEL__ */
+typedef unsigned long long u_quad_t;
+#endif /* __KERNEL__ */
+#else
+#define cdev_t dev_t
+#endif
+
+#ifdef __CYGWIN32__
+struct timespec {
+        time_t  tv_sec;         /* seconds */
+        long    tv_nsec;        /* nanoseconds */
+};
+#endif
+
+#ifndef __BIT_TYPES_DEFINED__
+#define __BIT_TYPES_DEFINED__
+typedef signed char	      int8_t;
+typedef unsigned char	    u_int8_t;
+typedef short		     int16_t;
+typedef unsigned short	   u_int16_t;
+typedef int		     int32_t;
+typedef unsigned int	   u_int32_t;
+#endif
+
+
+/*
+ * Cfs constants
+ */
+#define CODA_MAXNAMLEN   255
+#define CODA_MAXPATHLEN  1024
+#define CODA_MAXSYMLINK  10
+
+/* these are Coda's version of O_RDONLY etc combinations
+ * to deal with VFS open modes
+ */
+#define	C_O_READ	0x001
+#define	C_O_WRITE       0x002
+#define C_O_TRUNC       0x010
+#define C_O_EXCL	0x100
+#define C_O_CREAT	0x200
+
+/* these are to find mode bits in Venus */ 
+#define C_M_READ  00400
+#define C_M_WRITE 00200
+
+/* for access Venus will use */
+#define C_A_C_OK    8               /* Test for writing upon create.  */
+#define C_A_R_OK    4               /* Test for read permission.  */
+#define C_A_W_OK    2               /* Test for write permission.  */
+#define C_A_X_OK    1               /* Test for execute permission.  */
+#define C_A_F_OK    0               /* Test for existence.  */
+
+
+
+#ifndef _VENUS_DIRENT_T_
+#define _VENUS_DIRENT_T_ 1
+struct venus_dirent {
+        u_int32_t d_fileno;		/* file number of entry */
+        u_int16_t d_reclen;		/* length of this record */
+        u_int8_t  d_type;			/* file type, see below */
+        u_int8_t  d_namlen;		/* length of string in d_name */
+        char	  d_name[CODA_MAXNAMLEN + 1];/* name must be no longer than this */
+};
+#undef DIRSIZ
+#define DIRSIZ(dp)      ((sizeof (struct venus_dirent) - (CODA_MAXNAMLEN+1)) + \
+                         (((dp)->d_namlen+1 + 3) &~ 3))
+
+/*
+ * File types
+ */
+#define	CDT_UNKNOWN	 0
+#define	CDT_FIFO	 1
+#define	CDT_CHR		 2
+#define	CDT_DIR		 4
+#define	CDT_BLK		 6
+#define	CDT_REG		 8
+#define	CDT_LNK		10
+#define	CDT_SOCK	12
+#define	CDT_WHT		14
+
+/*
+ * Convert between stat structure types and directory types.
+ */
+#define	IFTOCDT(mode)	(((mode) & 0170000) >> 12)
+#define	CDTTOIF(dirtype)	((dirtype) << 12)
+
+#endif
+
+#ifndef _VUID_T_
+#define _VUID_T_
+typedef u_int32_t vuid_t;
+typedef u_int32_t vgid_t;
+#endif /*_VUID_T_ */
+
+struct CodaFid {
+	u_int32_t opaque[4];
+};
+
+#define coda_f2i(fid)\
+	(fid ? (fid->opaque[3] ^ (fid->opaque[2]<<10) ^ (fid->opaque[1]<<20) ^ fid->opaque[0]) : 0)
+
+#ifndef _VENUS_VATTR_T_
+#define _VENUS_VATTR_T_
+/*
+ * Vnode types.  VNON means no type.
+ */
+enum coda_vtype	{ C_VNON, C_VREG, C_VDIR, C_VBLK, C_VCHR, C_VLNK, C_VSOCK, C_VFIFO, C_VBAD };
+
+struct coda_vattr {
+	long     	va_type;	/* vnode type (for create) */
+	u_short		va_mode;	/* files access mode and type */
+	short		va_nlink;	/* number of references to file */
+	vuid_t		va_uid;		/* owner user id */
+	vgid_t		va_gid;		/* owner group id */
+	long		va_fileid;	/* file id */
+	u_quad_t	va_size;	/* file size in bytes */
+	long		va_blocksize;	/* blocksize preferred for i/o */
+	struct timespec	va_atime;	/* time of last access */
+	struct timespec	va_mtime;	/* time of last modification */
+	struct timespec	va_ctime;	/* time file changed */
+	u_long		va_gen;		/* generation number of file */
+	u_long		va_flags;	/* flags defined for file */
+	cdev_t	        va_rdev;	/* device special file represents */
+	u_quad_t	va_bytes;	/* bytes of disk space held by file */
+	u_quad_t	va_filerev;	/* file modification number */
+};
+
+#endif 
+
+/* structure used by CODA_STATFS for getting cache information from venus */
+struct coda_statfs {
+    int32_t f_blocks;
+    int32_t f_bfree;
+    int32_t f_bavail;
+    int32_t f_files;
+    int32_t f_ffree;
+};
+
+/*
+ * Kernel <--> Venus communications.
+ */
+
+#define CODA_ROOT	2
+#define CODA_OPEN_BY_FD	3
+#define CODA_OPEN	4
+#define CODA_CLOSE	5
+#define CODA_IOCTL	6
+#define CODA_GETATTR	7
+#define CODA_SETATTR	8
+#define CODA_ACCESS	9
+#define CODA_LOOKUP	10
+#define CODA_CREATE	11
+#define CODA_REMOVE	12
+#define CODA_LINK	13
+#define CODA_RENAME	14
+#define CODA_MKDIR	15
+#define CODA_RMDIR	16
+#define CODA_SYMLINK	18
+#define CODA_READLINK	19
+#define CODA_FSYNC	20
+#define CODA_VGET	22
+#define CODA_SIGNAL	23
+#define CODA_REPLACE	 24 /* DOWNCALL */
+#define CODA_FLUSH       25 /* DOWNCALL */
+#define CODA_PURGEUSER   26 /* DOWNCALL */
+#define CODA_ZAPFILE     27 /* DOWNCALL */
+#define CODA_ZAPDIR      28 /* DOWNCALL */
+#define CODA_PURGEFID    30 /* DOWNCALL */
+#define CODA_OPEN_BY_PATH 31
+#define CODA_RESOLVE     32
+#define CODA_REINTEGRATE 33
+#define CODA_STATFS	 34
+#define CODA_STORE	 35
+#define CODA_RELEASE	 36
+#define CODA_NCALLS 37
+
+#define DOWNCALL(opcode) (opcode >= CODA_REPLACE && opcode <= CODA_PURGEFID)
+
+#define VC_MAXDATASIZE	    8192
+#define VC_MAXMSGSIZE      sizeof(union inputArgs)+sizeof(union outputArgs) +\
+                            VC_MAXDATASIZE  
+
+#define CIOC_KERNEL_VERSION _IOWR('c', 10, size_t)
+
+#define CODA_KERNEL_VERSION 3 /* 128-bit file identifiers */
+
+/*
+ *        Venus <-> Coda  RPC arguments
+ */
+struct coda_in_hdr {
+    u_int32_t opcode;
+    u_int32_t unique;	    /* Keep multiple outstanding msgs distinct */
+    pid_t pid;
+    pid_t pgid;
+    vuid_t uid;
+};
+
+/* Really important that opcode and unique are 1st two fields! */
+struct coda_out_hdr {
+    u_int32_t opcode;
+    u_int32_t unique;	
+    u_int32_t result;
+};
+
+/* coda_root: NO_IN */
+struct coda_root_out {
+    struct coda_out_hdr oh;
+    struct CodaFid VFid;
+};
+
+struct coda_root_in {
+    struct coda_in_hdr in;
+};
+
+/* coda_open: */
+struct coda_open_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_open_out {
+    struct coda_out_hdr oh;
+    cdev_t	dev;
+    ino_t	inode;
+};
+
+
+/* coda_store: */
+struct coda_store_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_store_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_release: */
+struct coda_release_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_release_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_close: */
+struct coda_close_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_close_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_ioctl: */
+struct coda_ioctl_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	cmd;
+    int	len;
+    int	rwflag;
+    char *data;			/* Place holder for data. */
+};
+
+struct coda_ioctl_out {
+    struct coda_out_hdr oh;
+    int	len;
+    caddr_t	data;		/* Place holder for data. */
+};
+
+
+/* coda_getattr: */
+struct coda_getattr_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+};
+
+struct coda_getattr_out {
+    struct coda_out_hdr oh;
+    struct coda_vattr attr;
+};
+
+
+/* coda_setattr: NO_OUT */
+struct coda_setattr_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    struct coda_vattr attr;
+};
+
+struct coda_setattr_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_access: NO_OUT */
+struct coda_access_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_access_out {
+    struct coda_out_hdr out;
+};
+
+
+/* lookup flags */
+#define CLU_CASE_SENSITIVE     0x01
+#define CLU_CASE_INSENSITIVE   0x02
+
+/* coda_lookup: */
+struct  coda_lookup_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int         name;		/* Place holder for data. */
+    int         flags;	
+};
+
+struct coda_lookup_out {
+    struct coda_out_hdr oh;
+    struct CodaFid VFid;
+    int	vtype;
+};
+
+
+/* coda_create: */
+struct coda_create_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    struct coda_vattr attr;
+    int excl;
+    int mode;
+    int 	name;		/* Place holder for data. */
+};
+
+struct coda_create_out {
+    struct coda_out_hdr oh;
+    struct CodaFid VFid;
+    struct coda_vattr attr;
+};
+
+
+/* coda_remove: NO_OUT */
+struct coda_remove_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int name;		/* Place holder for data. */
+};
+
+struct coda_remove_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_link: NO_OUT */
+struct coda_link_in {
+    struct coda_in_hdr ih;
+    struct CodaFid sourceFid;	/* cnode to link *to* */
+    struct CodaFid destFid;	/* Directory in which to place link */
+    int tname;		/* Place holder for data. */
+};
+
+struct coda_link_out {
+    struct coda_out_hdr out;
+};
+
+
+/* coda_rename: NO_OUT */
+struct coda_rename_in {
+    struct coda_in_hdr ih;
+    struct CodaFid sourceFid;
+    int 	srcname;
+    struct CodaFid destFid;
+    int 	destname;
+};
+
+struct coda_rename_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_mkdir: */
+struct coda_mkdir_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    struct coda_vattr attr;
+    int	   name;		/* Place holder for data. */
+};
+
+struct coda_mkdir_out {
+    struct coda_out_hdr oh;
+    struct CodaFid VFid;
+    struct coda_vattr attr;
+};
+
+
+/* coda_rmdir: NO_OUT */
+struct coda_rmdir_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int name;		/* Place holder for data. */
+};
+
+struct coda_rmdir_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_symlink: NO_OUT */
+struct coda_symlink_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;	/* Directory to put symlink in */
+    int srcname;
+    struct coda_vattr attr;
+    int tname;
+};
+
+struct coda_symlink_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_readlink: */
+struct coda_readlink_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+};
+
+struct coda_readlink_out {
+    struct coda_out_hdr oh;
+    int	count;
+    caddr_t	data;		/* Place holder for data. */
+};
+
+
+/* coda_fsync: NO_OUT */
+struct coda_fsync_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+};
+
+struct coda_fsync_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_vget: */
+struct coda_vget_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+};
+
+struct coda_vget_out {
+    struct coda_out_hdr oh;
+    struct CodaFid VFid;
+    int	vtype;
+};
+
+
+/* CODA_SIGNAL is out-of-band, doesn't need data. */
+/* CODA_INVALIDATE is a venus->kernel call */
+/* CODA_FLUSH is a venus->kernel call */
+
+/* coda_purgeuser: */
+/* CODA_PURGEUSER is a venus->kernel call */
+struct coda_purgeuser_out {
+    struct coda_out_hdr oh;
+    vuid_t uid;
+};
+
+/* coda_zapfile: */
+/* CODA_ZAPFILE is a venus->kernel call */
+struct coda_zapfile_out {  
+    struct coda_out_hdr oh;
+    struct CodaFid CodaFid;
+};
+
+/* coda_zapdir: */
+/* CODA_ZAPDIR is a venus->kernel call */	
+struct coda_zapdir_out {	  
+    struct coda_out_hdr oh;
+    struct CodaFid CodaFid;
+};
+
+/* coda_purgefid: */
+/* CODA_PURGEFID is a venus->kernel call */	
+struct coda_purgefid_out { 
+    struct coda_out_hdr oh;
+    struct CodaFid CodaFid;
+};
+
+/* coda_replace: */
+/* CODA_REPLACE is a venus->kernel call */	
+struct coda_replace_out { /* coda_replace is a venus->kernel call */
+    struct coda_out_hdr oh;
+    struct CodaFid NewFid;
+    struct CodaFid OldFid;
+};
+
+/* coda_open_by_fd: */
+struct coda_open_by_fd_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int        flags;
+};
+
+struct coda_open_by_fd_out {
+    struct coda_out_hdr oh;
+    int fd;
+
+#ifdef __KERNEL__
+    struct file *fh; /* not passed from userspace but used in-kernel only */
+#endif
+};
+
+/* coda_open_by_path: */
+struct coda_open_by_path_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_open_by_path_out {
+    struct coda_out_hdr oh;
+	int path;
+};
+
+/* coda_statfs: NO_IN */
+struct coda_statfs_in {
+    struct coda_in_hdr in;
+};
+
+struct coda_statfs_out {
+    struct coda_out_hdr oh;
+    struct coda_statfs stat;
+};
+
+/* 
+ * Occasionally, we don't cache the fid returned by CODA_LOOKUP. 
+ * For instance, if the fid is inconsistent. 
+ * This case is handled by setting the top bit of the type result parameter.
+ */
+#define CODA_NOCACHE          0x80000000
+
+union inputArgs {
+    struct coda_in_hdr ih;		/* NB: every struct below begins with an ih */
+    struct coda_open_in coda_open;
+    struct coda_store_in coda_store;
+    struct coda_release_in coda_release;
+    struct coda_close_in coda_close;
+    struct coda_ioctl_in coda_ioctl;
+    struct coda_getattr_in coda_getattr;
+    struct coda_setattr_in coda_setattr;
+    struct coda_access_in coda_access;
+    struct coda_lookup_in coda_lookup;
+    struct coda_create_in coda_create;
+    struct coda_remove_in coda_remove;
+    struct coda_link_in coda_link;
+    struct coda_rename_in coda_rename;
+    struct coda_mkdir_in coda_mkdir;
+    struct coda_rmdir_in coda_rmdir;
+    struct coda_symlink_in coda_symlink;
+    struct coda_readlink_in coda_readlink;
+    struct coda_fsync_in coda_fsync;
+    struct coda_vget_in coda_vget;
+    struct coda_open_by_fd_in coda_open_by_fd;
+    struct coda_open_by_path_in coda_open_by_path;
+    struct coda_statfs_in coda_statfs;
+};
+
+union outputArgs {
+    struct coda_out_hdr oh;		/* NB: every struct below begins with an oh */
+    struct coda_root_out coda_root;
+    struct coda_open_out coda_open;
+    struct coda_ioctl_out coda_ioctl;
+    struct coda_getattr_out coda_getattr;
+    struct coda_lookup_out coda_lookup;
+    struct coda_create_out coda_create;
+    struct coda_mkdir_out coda_mkdir;
+    struct coda_readlink_out coda_readlink;
+    struct coda_vget_out coda_vget;
+    struct coda_purgeuser_out coda_purgeuser;
+    struct coda_zapfile_out coda_zapfile;
+    struct coda_zapdir_out coda_zapdir;
+    struct coda_purgefid_out coda_purgefid;
+    struct coda_replace_out coda_replace;
+    struct coda_open_by_fd_out coda_open_by_fd;
+    struct coda_open_by_path_out coda_open_by_path;
+    struct coda_statfs_out coda_statfs;
+};    
+
+union coda_downcalls {
+    /* CODA_INVALIDATE is a venus->kernel call */
+    /* CODA_FLUSH is a venus->kernel call */
+    struct coda_purgeuser_out purgeuser;
+    struct coda_zapfile_out zapfile;
+    struct coda_zapdir_out zapdir;
+    struct coda_purgefid_out purgefid;
+    struct coda_replace_out replace;
+};
+
+
+/*
+ * Used for identifying usage of "Control" and pioctls
+ */
+
+#define PIOCPARM_MASK 0x0000ffff
+struct ViceIoctl {
+        void __user *in;        /* Data to be transferred in */
+        void __user *out;       /* Data to be transferred out */
+        u_short in_size;        /* Size of input buffer <= 2K */
+        u_short out_size;       /* Maximum size of output buffer, <= 2K */
+};
+
+struct PioctlData {
+        const char __user *path;
+        int follow;
+        struct ViceIoctl vi;
+};
+
+#define CODA_CONTROL		".CONTROL"
+#define CODA_CONTROLLEN		8
+#define CTL_INO			-1
+
+/* Data passed to mount */
+
+#define CODA_MOUNT_VERSION 1
+
+struct coda_mount_data {
+	int		version;
+	int		fd;       /* Opened device */
+};
+
+#endif 
+
diff --git a/include/linux/coda_psdev.h b/include/linux/coda_psdev.h
new file mode 100644
index 00000000..72f2d2f0
--- /dev/null
+++ b/include/linux/coda_psdev.h
@@ -0,0 +1,96 @@
+#ifndef __CODA_PSDEV_H
+#define __CODA_PSDEV_H
+
+#include <linux/magic.h>
+
+#define CODA_PSDEV_MAJOR 67
+#define MAX_CODADEVS  5	   /* how many do we allow */
+
+#ifdef __KERNEL__
+#include <linux/backing-dev.h>
+#include <linux/mutex.h>
+
+struct kstatfs;
+
+/* communication pending/processing queues */
+struct venus_comm {
+	u_long		    vc_seq;
+	wait_queue_head_t   vc_waitq; /* Venus wait queue */
+	struct list_head    vc_pending;
+	struct list_head    vc_processing;
+	int                 vc_inuse;
+	struct super_block *vc_sb;
+	struct backing_dev_info bdi;
+	struct mutex	    vc_mutex;
+};
+
+
+static inline struct venus_comm *coda_vcp(struct super_block *sb)
+{
+	return (struct venus_comm *)((sb)->s_fs_info);
+}
+
+/* upcalls */
+int venus_rootfid(struct super_block *sb, struct CodaFid *fidp);
+int venus_getattr(struct super_block *sb, struct CodaFid *fid,
+		  struct coda_vattr *attr);
+int venus_setattr(struct super_block *, struct CodaFid *, struct coda_vattr *);
+int venus_lookup(struct super_block *sb, struct CodaFid *fid, 
+		 const char *name, int length, int *type, 
+		 struct CodaFid *resfid);
+int venus_close(struct super_block *sb, struct CodaFid *fid, int flags,
+		vuid_t uid);
+int venus_open(struct super_block *sb, struct CodaFid *fid, int flags,
+	       struct file **f);
+int venus_mkdir(struct super_block *sb, struct CodaFid *dirfid, 
+		const char *name, int length, 
+		struct CodaFid *newfid, struct coda_vattr *attrs);
+int venus_create(struct super_block *sb, struct CodaFid *dirfid, 
+		 const char *name, int length, int excl, int mode,
+		 struct CodaFid *newfid, struct coda_vattr *attrs) ;
+int venus_rmdir(struct super_block *sb, struct CodaFid *dirfid, 
+		const char *name, int length);
+int venus_remove(struct super_block *sb, struct CodaFid *dirfid, 
+		 const char *name, int length);
+int venus_readlink(struct super_block *sb, struct CodaFid *fid, 
+		   char *buffer, int *length);
+int venus_rename(struct super_block *, struct CodaFid *new_fid, 
+		 struct CodaFid *old_fid, size_t old_length, 
+		 size_t new_length, const char *old_name, 
+		 const char *new_name);
+int venus_link(struct super_block *sb, struct CodaFid *fid, 
+		  struct CodaFid *dirfid, const char *name, int len );
+int venus_symlink(struct super_block *sb, struct CodaFid *fid,
+		  const char *name, int len, const char *symname, int symlen);
+int venus_access(struct super_block *sb, struct CodaFid *fid, int mask);
+int venus_pioctl(struct super_block *sb, struct CodaFid *fid,
+		 unsigned int cmd, struct PioctlData *data);
+int coda_downcall(struct venus_comm *vcp, int opcode, union outputArgs *out);
+int venus_fsync(struct super_block *sb, struct CodaFid *fid);
+int venus_statfs(struct dentry *dentry, struct kstatfs *sfs);
+
+/*
+ * Statistics
+ */
+
+extern struct venus_comm coda_comms[];
+#endif /* __KERNEL__ */
+
+/* messages between coda filesystem in kernel and Venus */
+struct upc_req {
+	struct list_head    uc_chain;
+	caddr_t	            uc_data;
+	u_short	            uc_flags;
+	u_short             uc_inSize;  /* Size is at most 5000 bytes */
+	u_short	            uc_outSize;
+	u_short	            uc_opcode;  /* copied from data to save lookup */
+	int		    uc_unique;
+	wait_queue_head_t   uc_sleep;   /* process' wait queue */
+};
+
+#define CODA_REQ_ASYNC  0x1
+#define CODA_REQ_READ   0x2
+#define CODA_REQ_WRITE  0x4
+#define CODA_REQ_ABORT  0x8
+
+#endif
diff --git a/include/linux/coff.h b/include/linux/coff.h
new file mode 100644
index 00000000..6354a7fe
--- /dev/null
+++ b/include/linux/coff.h
@@ -0,0 +1,351 @@
+/* This file is derived from the GAS 2.1.4 assembler control file.
+   The GAS product is under the GNU General Public License, version 2 or later.
+   As such, this file is also under that license.
+
+   If the file format changes in the COFF object, this file should be
+   subsequently updated to reflect the changes.
+
+   The actual loader module only uses a few of these structures. The full
+   set is documented here because I received the full set. If you wish
+   more information about COFF, then O'Reilly has a very excellent book.
+*/
+
+#define  E_SYMNMLEN  8   /* Number of characters in a symbol name         */
+#define  E_FILNMLEN 14   /* Number of characters in a file name           */
+#define  E_DIMNUM    4   /* Number of array dimensions in auxiliary entry */
+
+/*
+ * These defines are byte order independent. There is no alignment of fields
+ * permitted in the structures. Therefore they are declared as characters
+ * and the values loaded from the character positions. It also makes it
+ * nice to have it "endian" independent.
+ */
+ 
+/* Load a short int from the following tables with little-endian formats */
+#define COFF_SHORT_L(ps) ((short)(((unsigned short)((unsigned char)ps[1])<<8)|\
+				  ((unsigned short)((unsigned char)ps[0]))))
+
+/* Load a long int from the following tables with little-endian formats */
+#define COFF_LONG_L(ps) (((long)(((unsigned long)((unsigned char)ps[3])<<24) |\
+				 ((unsigned long)((unsigned char)ps[2])<<16) |\
+				 ((unsigned long)((unsigned char)ps[1])<<8)  |\
+				 ((unsigned long)((unsigned char)ps[0])))))
+ 
+/* Load a short int from the following tables with big-endian formats */
+#define COFF_SHORT_H(ps) ((short)(((unsigned short)((unsigned char)ps[0])<<8)|\
+				  ((unsigned short)((unsigned char)ps[1]))))
+
+/* Load a long int from the following tables with big-endian formats */
+#define COFF_LONG_H(ps) (((long)(((unsigned long)((unsigned char)ps[0])<<24) |\
+				 ((unsigned long)((unsigned char)ps[1])<<16) |\
+				 ((unsigned long)((unsigned char)ps[2])<<8)  |\
+				 ((unsigned long)((unsigned char)ps[3])))))
+
+/* These may be overridden later by brain dead implementations which generate
+   a big-endian header with little-endian data. In that case, generate a
+   replacement macro which tests a flag and uses either of the two above
+   as appropriate. */
+
+#define COFF_LONG(v)   COFF_LONG_L(v)
+#define COFF_SHORT(v)  COFF_SHORT_L(v)
+
+/*** coff information for Intel 386/486.  */
+
+/********************** FILE HEADER **********************/
+
+struct COFF_filehdr {
+	char f_magic[2];	/* magic number			*/
+	char f_nscns[2];	/* number of sections		*/
+	char f_timdat[4];	/* time & date stamp		*/
+	char f_symptr[4];	/* file pointer to symtab	*/
+	char f_nsyms[4];	/* number of symtab entries	*/
+	char f_opthdr[2];	/* sizeof(optional hdr)		*/
+	char f_flags[2];	/* flags			*/
+};
+
+/*
+ *   Bits for f_flags:
+ *
+ *	F_RELFLG	relocation info stripped from file
+ *	F_EXEC		file is executable  (i.e. no unresolved external
+ *			references)
+ *	F_LNNO		line numbers stripped from file
+ *	F_LSYMS		local symbols stripped from file
+ *	F_MINMAL	this is a minimal object file (".m") output of fextract
+ *	F_UPDATE	this is a fully bound update file, output of ogen
+ *	F_SWABD		this file has had its bytes swabbed (in names)
+ *	F_AR16WR	this file has the byte ordering of an AR16WR
+ *			(e.g. 11/70) machine
+ *	F_AR32WR	this file has the byte ordering of an AR32WR machine
+ *			(e.g. vax and iNTEL 386)
+ *	F_AR32W		this file has the byte ordering of an AR32W machine
+ *			(e.g. 3b,maxi)
+ *	F_PATCH		file contains "patch" list in optional header
+ *	F_NODF		(minimal file only) no decision functions for
+ *			replaced functions
+ */
+
+#define  COFF_F_RELFLG		0000001
+#define  COFF_F_EXEC		0000002
+#define  COFF_F_LNNO		0000004
+#define  COFF_F_LSYMS		0000010
+#define  COFF_F_MINMAL		0000020
+#define  COFF_F_UPDATE		0000040
+#define  COFF_F_SWABD		0000100
+#define  COFF_F_AR16WR		0000200
+#define  COFF_F_AR32WR		0000400
+#define  COFF_F_AR32W		0001000
+#define  COFF_F_PATCH		0002000
+#define  COFF_F_NODF		0002000
+
+#define	COFF_I386MAGIC	        0x14c   /* Linux's system    */
+
+#if 0   /* Perhaps, someday, these formats may be used.      */
+#define COFF_I386PTXMAGIC	0x154
+#define COFF_I386AIXMAGIC	0x175   /* IBM's AIX system  */
+#define COFF_I386BADMAG(x) ((COFF_SHORT((x).f_magic) != COFF_I386MAGIC) \
+			  && COFF_SHORT((x).f_magic) != COFF_I386PTXMAGIC \
+			  && COFF_SHORT((x).f_magic) != COFF_I386AIXMAGIC)
+#else
+#define COFF_I386BADMAG(x) (COFF_SHORT((x).f_magic) != COFF_I386MAGIC)
+#endif
+
+#define	COFF_FILHDR	struct COFF_filehdr
+#define	COFF_FILHSZ	sizeof(COFF_FILHDR)
+
+/********************** AOUT "OPTIONAL HEADER" **********************/
+
+/* Linux COFF must have this "optional" header. Standard COFF has no entry
+   location for the "entry" point. They normally would start with the first
+   location of the .text section. This is not a good idea for linux. So,
+   the use of this "optional" header is not optional. It is required.
+
+   Do not be tempted to assume that the size of the optional header is
+   a constant and simply index the next byte by the size of this structure.
+   Use the 'f_opthdr' field in the main coff header for the size of the
+   structure actually written to the file!!
+*/
+
+typedef struct 
+{
+  char 	magic[2];		/* type of file				 */
+  char	vstamp[2];		/* version stamp			 */
+  char	tsize[4];		/* text size in bytes, padded to FW bdry */
+  char	dsize[4];		/* initialized   data "   "		 */
+  char	bsize[4];		/* uninitialized data "   "		 */
+  char	entry[4];		/* entry pt.				 */
+  char 	text_start[4];		/* base of text used for this file       */
+  char 	data_start[4];		/* base of data used for this file       */
+}
+COFF_AOUTHDR;
+
+#define COFF_AOUTSZ (sizeof(COFF_AOUTHDR))
+
+#define COFF_STMAGIC	0401
+#define COFF_OMAGIC     0404
+#define COFF_JMAGIC     0407    /* dirty text and data image, can't share  */
+#define COFF_DMAGIC     0410    /* dirty text segment, data aligned        */
+#define COFF_ZMAGIC     0413    /* The proper magic number for executables  */
+#define COFF_SHMAGIC	0443	/* shared library header                   */
+
+/********************** SECTION HEADER **********************/
+
+struct COFF_scnhdr {
+  char		s_name[8];	/* section name			    */
+  char		s_paddr[4];	/* physical address, aliased s_nlib */
+  char		s_vaddr[4];	/* virtual address		    */
+  char		s_size[4];	/* section size			    */
+  char		s_scnptr[4];	/* file ptr to raw data for section */
+  char		s_relptr[4];	/* file ptr to relocation	    */
+  char		s_lnnoptr[4];	/* file ptr to line numbers	    */
+  char		s_nreloc[2];	/* number of relocation entries	    */
+  char		s_nlnno[2];	/* number of line number entries    */
+  char		s_flags[4];	/* flags			    */
+};
+
+#define	COFF_SCNHDR	struct COFF_scnhdr
+#define	COFF_SCNHSZ	sizeof(COFF_SCNHDR)
+
+/*
+ * names of "special" sections
+ */
+
+#define COFF_TEXT	".text"
+#define COFF_DATA	".data"
+#define COFF_BSS	".bss"
+#define COFF_COMMENT    ".comment"
+#define COFF_LIB        ".lib"
+
+#define COFF_SECT_TEXT  0      /* Section for instruction code             */
+#define COFF_SECT_DATA  1      /* Section for initialized globals          */
+#define COFF_SECT_BSS   2      /* Section for un-initialized globals       */
+#define COFF_SECT_REQD  3      /* Minimum number of sections for good file */
+
+#define COFF_STYP_REG     0x00 /* regular segment                          */
+#define COFF_STYP_DSECT   0x01 /* dummy segment                            */
+#define COFF_STYP_NOLOAD  0x02 /* no-load segment                          */
+#define COFF_STYP_GROUP   0x04 /* group segment                            */
+#define COFF_STYP_PAD     0x08 /* .pad segment                             */
+#define COFF_STYP_COPY    0x10 /* copy section                             */
+#define COFF_STYP_TEXT    0x20 /* .text segment                            */
+#define COFF_STYP_DATA    0x40 /* .data segment                            */
+#define COFF_STYP_BSS     0x80 /* .bss segment                             */
+#define COFF_STYP_INFO   0x200 /* .comment section                         */
+#define COFF_STYP_OVER   0x400 /* overlay section                          */
+#define COFF_STYP_LIB    0x800 /* library section                          */
+
+/*
+ * Shared libraries have the following section header in the data field for
+ * each library.
+ */
+
+struct COFF_slib {
+  char		sl_entsz[4];	/* Size of this entry               */
+  char		sl_pathndx[4];	/* size of the header field         */
+};
+
+#define	COFF_SLIBHD	struct COFF_slib
+#define	COFF_SLIBSZ	sizeof(COFF_SLIBHD)
+
+/********************** LINE NUMBERS **********************/
+
+/* 1 line number entry for every "breakpointable" source line in a section.
+ * Line numbers are grouped on a per function basis; first entry in a function
+ * grouping will have l_lnno = 0 and in place of physical address will be the
+ * symbol table index of the function name.
+ */
+
+struct COFF_lineno {
+  union {
+    char l_symndx[4];	/* function name symbol index, iff l_lnno == 0*/
+    char l_paddr[4];	/* (physical) address of line number	*/
+  } l_addr;
+  char l_lnno[2];	/* line number		*/
+};
+
+#define	COFF_LINENO	struct COFF_lineno
+#define	COFF_LINESZ	6
+
+/********************** SYMBOLS **********************/
+
+#define COFF_E_SYMNMLEN	 8	/* # characters in a short symbol name	*/
+#define COFF_E_FILNMLEN	14	/* # characters in a file name		*/
+#define COFF_E_DIMNUM	 4	/* # array dimensions in auxiliary entry */
+
+/*
+ *  All symbols and sections have the following definition
+ */
+
+struct COFF_syment 
+{
+  union {
+    char e_name[E_SYMNMLEN];    /* Symbol name (first 8 characters) */
+    struct {
+      char e_zeroes[4];         /* Leading zeros */
+      char e_offset[4];         /* Offset if this is a header section */
+    } e;
+  } e;
+
+  char e_value[4];              /* Value (address) of the segment */
+  char e_scnum[2];              /* Section number */
+  char e_type[2];               /* Type of section */
+  char e_sclass[1];             /* Loader class */
+  char e_numaux[1];             /* Number of auxiliary entries which follow */
+};
+
+#define COFF_N_BTMASK	(0xf)   /* Mask for important class bits */
+#define COFF_N_TMASK	(0x30)  /* Mask for important type bits  */
+#define COFF_N_BTSHFT	(4)     /* # bits to shift class field   */
+#define COFF_N_TSHIFT	(2)     /* # bits to shift type field    */
+
+/*
+ *  Auxiliary entries because the main table is too limiting.
+ */
+  
+union COFF_auxent {
+
+/*
+ *  Debugger information
+ */
+
+  struct {
+    char x_tagndx[4];	        /* str, un, or enum tag indx */
+    union {
+      struct {
+	char  x_lnno[2];        /* declaration line number */
+	char  x_size[2];        /* str/union/array size */
+      } x_lnsz;
+      char x_fsize[4];	        /* size of function */
+    } x_misc;
+
+    union {
+      struct {		        /* if ISFCN, tag, or .bb */
+	char x_lnnoptr[4];	/* ptr to fcn line # */
+	char x_endndx[4];	/* entry ndx past block end */
+      } x_fcn;
+
+      struct {		        /* if ISARY, up to 4 dimen. */
+	char x_dimen[E_DIMNUM][2];
+      } x_ary;
+    } x_fcnary;
+
+    char x_tvndx[2];	/* tv index */
+  } x_sym;
+
+/*
+ *   Source file names (debugger information)
+ */
+
+  union {
+    char x_fname[E_FILNMLEN];
+    struct {
+      char x_zeroes[4];
+      char x_offset[4];
+    } x_n;
+  } x_file;
+
+/*
+ *   Section information
+ */
+
+  struct {
+    char x_scnlen[4];	/* section length */
+    char x_nreloc[2];	/* # relocation entries */
+    char x_nlinno[2];	/* # line numbers */
+  } x_scn;
+
+/*
+ *   Transfer vector (branch table)
+ */
+  
+  struct {
+    char x_tvfill[4];	/* tv fill value */
+    char x_tvlen[2];	/* length of .tv */
+    char x_tvran[2][2];	/* tv range */
+  } x_tv;		/* info about .tv section (in auxent of symbol .tv)) */
+};
+
+#define	COFF_SYMENT	struct COFF_syment
+#define	COFF_SYMESZ	18	
+#define	COFF_AUXENT	union COFF_auxent
+#define	COFF_AUXESZ	18
+
+#define COFF_ETEXT	"etext"
+
+/********************** RELOCATION DIRECTIVES **********************/
+
+struct COFF_reloc {
+  char r_vaddr[4];        /* Virtual address of item    */
+  char r_symndx[4];       /* Symbol index in the symtab */
+  char r_type[2];         /* Relocation type            */
+};
+
+#define COFF_RELOC struct COFF_reloc
+#define COFF_RELSZ 10
+
+#define COFF_DEF_DATA_SECTION_ALIGNMENT  4
+#define COFF_DEF_BSS_SECTION_ALIGNMENT   4
+#define COFF_DEF_TEXT_SECTION_ALIGNMENT  4
+
+/* For new sections we haven't heard of before */
+#define COFF_DEF_SECTION_ALIGNMENT       4
diff --git a/include/linux/com20020.h b/include/linux/com20020.h
new file mode 100644
index 00000000..5dcfb944
--- /dev/null
+++ b/include/linux/com20020.h
@@ -0,0 +1,116 @@
+/*
+ * Linux ARCnet driver - COM20020 chipset support - function declarations
+ * 
+ * Written 1997 by David Woodhouse.
+ * Written 1994-1999 by Avery Pennarun.
+ * Derived from skeleton.c by Donald Becker.
+ *
+ * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
+ *  for sponsoring the further development of this driver.
+ *
+ * **********************
+ *
+ * The original copyright of skeleton.c was as follows:
+ *
+ * skeleton.c Written 1993 by Donald Becker.
+ * Copyright 1993 United States Government as represented by the
+ * Director, National Security Agency.  This software may only be used
+ * and distributed according to the terms of the GNU General Public License as
+ * modified by SRC, incorporated herein by reference.
+ *
+ * **********************
+ *
+ * For more details, see drivers/net/arcnet.c
+ *
+ * **********************
+ */
+#ifndef __COM20020_H
+#define __COM20020_H
+
+int com20020_check(struct net_device *dev);
+int com20020_found(struct net_device *dev, int shared);
+extern const struct net_device_ops com20020_netdev_ops;
+
+/* The number of low I/O ports used by the card. */
+#define ARCNET_TOTAL_SIZE 8
+
+/* various register addresses */
+#ifdef CONFIG_SA1100_CT6001
+#define BUS_ALIGN  2  /* 8 bit device on a 16 bit bus - needs padding */
+#else
+#define BUS_ALIGN  1
+#endif
+
+
+#define _INTMASK  (ioaddr+BUS_ALIGN*0)	/* writable */
+#define _STATUS   (ioaddr+BUS_ALIGN*0)	/* readable */
+#define _COMMAND  (ioaddr+BUS_ALIGN*1)	/* standard arcnet commands */
+#define _DIAGSTAT (ioaddr+BUS_ALIGN*1)	/* diagnostic status register */
+#define _ADDR_HI  (ioaddr+BUS_ALIGN*2)	/* control registers for IO-mapped memory */
+#define _ADDR_LO  (ioaddr+BUS_ALIGN*3)
+#define _MEMDATA  (ioaddr+BUS_ALIGN*4)	/* data port for IO-mapped memory */
+#define _SUBADR   (ioaddr+BUS_ALIGN*5)	/* the extended port _XREG refers to */
+#define _CONFIG   (ioaddr+BUS_ALIGN*6)	/* configuration register */
+#define _XREG     (ioaddr+BUS_ALIGN*7)	/* extra registers (indexed by _CONFIG
+  					or _SUBADR) */
+
+/* in the ADDR_HI register */
+#define RDDATAflag	0x80	/* next access is a read (not a write) */
+
+/* in the DIAGSTAT register */
+#define NEWNXTIDflag	0x02	/* ID to which token is passed has changed */
+
+/* in the CONFIG register */
+#define RESETcfg	0x80	/* put card in reset state */
+#define TXENcfg		0x20	/* enable TX */
+
+/* in SETUP register */
+#define PROMISCset	0x10	/* enable RCV_ALL */
+#define P1MODE		0x80    /* enable P1-MODE for Backplane */
+#define SLOWARB		0x01    /* enable Slow Arbitration for >=5Mbps */
+
+/* COM2002x */
+#define SUB_TENTATIVE	0	/* tentative node ID */
+#define SUB_NODE	1	/* node ID */
+#define SUB_SETUP1	2	/* various options */
+#define SUB_TEST	3	/* test/diag register */
+
+/* COM20022 only */
+#define SUB_SETUP2	4	/* sundry options */
+#define SUB_BUSCTL	5	/* bus control options */
+#define SUB_DMACOUNT	6	/* DMA count options */
+
+#define SET_SUBADR(x) do { \
+	if ((x) < 4) \
+	{ \
+		lp->config = (lp->config & ~0x03) | (x); \
+		SETCONF; \
+	} \
+	else \
+	{ \
+		outb(x, _SUBADR); \
+	} \
+} while (0)
+
+#undef ARCRESET
+#undef ASTATUS
+#undef ACOMMAND
+#undef AINTMASK
+
+#define ARCRESET { outb(lp->config | 0x80, _CONFIG); \
+		    udelay(5);                        \
+		    outb(lp->config , _CONFIG);       \
+                  }
+#define ARCRESET0 { outb(0x18 | 0x80, _CONFIG);   \
+		    udelay(5);                       \
+		    outb(0x18 , _CONFIG);            \
+                  }
+
+#define ASTATUS()	inb(_STATUS)
+#define ADIAGSTATUS()	inb(_DIAGSTAT)
+#define ACOMMAND(cmd)	outb((cmd),_COMMAND)
+#define AINTMASK(msk)	outb((msk),_INTMASK)
+
+#define SETCONF		outb(lp->config, _CONFIG)
+
+#endif /* __COM20020_H */
diff --git a/include/linux/combo_mt66xx.h b/include/linux/combo_mt66xx.h
new file mode 100755
index 00000000..7f46cf7f
--- /dev/null
+++ b/include/linux/combo_mt66xx.h
@@ -0,0 +1,25 @@
+
+
+#ifndef __COMBO_MT66XX_H__
+#define __COMBO_MT66xx_H__
+
+struct mtk_wmt_platform_data {
+	/* GPIO pin config */
+	int pmu;
+	int rst;
+	int bgf_int;
+	int urt_cts;
+	int rtc;
+	int gps_sync;
+	int gps_lna;
+
+	/* kernel launcher parameter. */
+	
+};
+
+struct mtk_sdio_eint_platform_data {
+	/* used for sdio eint. */
+	int sdio_eint;
+};
+
+#endif
diff --git a/include/linux/compaction.h b/include/linux/compaction.h
new file mode 100644
index 00000000..51a90b7f
--- /dev/null
+++ b/include/linux/compaction.h
@@ -0,0 +1,109 @@
+#ifndef _LINUX_COMPACTION_H
+#define _LINUX_COMPACTION_H
+
+/* Return values for compact_zone() and try_to_compact_pages() */
+/* compaction didn't start as it was not possible or direct reclaim was more suitable */
+#define COMPACT_SKIPPED		0
+/* compaction should continue to another pageblock */
+#define COMPACT_CONTINUE	1
+/* direct compaction partially compacted a zone and there are suitable pages */
+#define COMPACT_PARTIAL		2
+/* The full zone was compacted */
+#define COMPACT_COMPLETE	3
+
+#ifdef CONFIG_COMPACTION
+extern int sysctl_compact_memory;
+extern int sysctl_compaction_handler(struct ctl_table *table, int write,
+			void __user *buffer, size_t *length, loff_t *ppos);
+extern int sysctl_extfrag_threshold;
+extern int sysctl_extfrag_handler(struct ctl_table *table, int write,
+			void __user *buffer, size_t *length, loff_t *ppos);
+
+extern int fragmentation_index(struct zone *zone, unsigned int order);
+extern unsigned long try_to_compact_pages(struct zonelist *zonelist,
+			int order, gfp_t gfp_mask, nodemask_t *mask,
+			bool sync);
+extern int compact_pgdat(pg_data_t *pgdat, int order);
+extern unsigned long compaction_suitable(struct zone *zone, int order);
+
+/* Do not skip compaction more than 64 times */
+#define COMPACT_MAX_DEFER_SHIFT 6
+
+/*
+ * Compaction is deferred when compaction fails to result in a page
+ * allocation success. 1 << compact_defer_limit compactions are skipped up
+ * to a limit of 1 << COMPACT_MAX_DEFER_SHIFT
+ */
+static inline void defer_compaction(struct zone *zone, int order)
+{
+	zone->compact_considered = 0;
+	zone->compact_defer_shift++;
+
+	if (order < zone->compact_order_failed)
+		zone->compact_order_failed = order;
+
+	if (zone->compact_defer_shift > COMPACT_MAX_DEFER_SHIFT)
+		zone->compact_defer_shift = COMPACT_MAX_DEFER_SHIFT;
+}
+
+/* Returns true if compaction should be skipped this time */
+static inline bool compaction_deferred(struct zone *zone, int order)
+{
+	unsigned long defer_limit = 1UL << zone->compact_defer_shift;
+
+	if (order < zone->compact_order_failed)
+		return false;
+
+	/* Avoid possible overflow */
+	if (++zone->compact_considered > defer_limit)
+		zone->compact_considered = defer_limit;
+
+	return zone->compact_considered < (1UL << zone->compact_defer_shift);
+}
+
+#else
+static inline unsigned long try_to_compact_pages(struct zonelist *zonelist,
+			int order, gfp_t gfp_mask, nodemask_t *nodemask,
+			bool sync)
+{
+	return COMPACT_CONTINUE;
+}
+
+static inline int compact_pgdat(pg_data_t *pgdat, int order)
+{
+	return COMPACT_CONTINUE;
+}
+
+static inline unsigned long compaction_suitable(struct zone *zone, int order)
+{
+	return COMPACT_SKIPPED;
+}
+
+static inline void defer_compaction(struct zone *zone, int order)
+{
+}
+
+static inline bool compaction_deferred(struct zone *zone, int order)
+{
+	return 1;
+}
+
+#endif /* CONFIG_COMPACTION */
+
+#if defined(CONFIG_COMPACTION) && defined(CONFIG_SYSFS) && defined(CONFIG_NUMA)
+extern int compaction_register_node(struct node *node);
+extern void compaction_unregister_node(struct node *node);
+
+#else
+
+static inline int compaction_register_node(struct node *node)
+{
+	return 0;
+}
+
+static inline void compaction_unregister_node(struct node *node)
+{
+}
+#endif /* CONFIG_COMPACTION && CONFIG_SYSFS && CONFIG_NUMA */
+
+#endif /* _LINUX_COMPACTION_H */
diff --git a/include/linux/compat.h b/include/linux/compat.h
new file mode 100644
index 00000000..5d46217f
--- /dev/null
+++ b/include/linux/compat.h
@@ -0,0 +1,599 @@
+#ifndef _LINUX_COMPAT_H
+#define _LINUX_COMPAT_H
+/*
+ * These are the type definitions for the architecture specific
+ * syscall compatibility layer.
+ */
+
+#ifdef CONFIG_COMPAT
+
+#include <linux/stat.h>
+#include <linux/param.h>	/* for HZ */
+#include <linux/sem.h>
+#include <linux/socket.h>
+#include <linux/if.h>
+#include <linux/fs.h>
+#include <linux/aio_abi.h>	/* for aio_context_t */
+
+#include <asm/compat.h>
+#include <asm/siginfo.h>
+#include <asm/signal.h>
+
+#ifndef COMPAT_USE_64BIT_TIME
+#define COMPAT_USE_64BIT_TIME 0
+#endif
+
+#define compat_jiffies_to_clock_t(x)	\
+		(((unsigned long)(x) * COMPAT_USER_HZ) / HZ)
+
+typedef __compat_uid32_t	compat_uid_t;
+typedef __compat_gid32_t	compat_gid_t;
+
+struct compat_sel_arg_struct;
+struct rusage;
+
+struct compat_itimerspec {
+	struct compat_timespec it_interval;
+	struct compat_timespec it_value;
+};
+
+struct compat_utimbuf {
+	compat_time_t		actime;
+	compat_time_t		modtime;
+};
+
+struct compat_itimerval {
+	struct compat_timeval	it_interval;
+	struct compat_timeval	it_value;
+};
+
+struct compat_tms {
+	compat_clock_t		tms_utime;
+	compat_clock_t		tms_stime;
+	compat_clock_t		tms_cutime;
+	compat_clock_t		tms_cstime;
+};
+
+struct compat_timex {
+	compat_uint_t modes;
+	compat_long_t offset;
+	compat_long_t freq;
+	compat_long_t maxerror;
+	compat_long_t esterror;
+	compat_int_t status;
+	compat_long_t constant;
+	compat_long_t precision;
+	compat_long_t tolerance;
+	struct compat_timeval time;
+	compat_long_t tick;
+	compat_long_t ppsfreq;
+	compat_long_t jitter;
+	compat_int_t shift;
+	compat_long_t stabil;
+	compat_long_t jitcnt;
+	compat_long_t calcnt;
+	compat_long_t errcnt;
+	compat_long_t stbcnt;
+	compat_int_t tai;
+
+	compat_int_t:32; compat_int_t:32; compat_int_t:32; compat_int_t:32;
+	compat_int_t:32; compat_int_t:32; compat_int_t:32; compat_int_t:32;
+	compat_int_t:32; compat_int_t:32; compat_int_t:32;
+};
+
+#define _COMPAT_NSIG_WORDS	(_COMPAT_NSIG / _COMPAT_NSIG_BPW)
+
+typedef struct {
+	compat_sigset_word	sig[_COMPAT_NSIG_WORDS];
+} compat_sigset_t;
+
+/*
+ * These functions operate strictly on struct compat_time*
+ */
+extern int get_compat_timespec(struct timespec *,
+			       const struct compat_timespec __user *);
+extern int put_compat_timespec(const struct timespec *,
+			       struct compat_timespec __user *);
+extern int get_compat_timeval(struct timeval *,
+			      const struct compat_timeval __user *);
+extern int put_compat_timeval(const struct timeval *,
+			      struct compat_timeval __user *);
+/*
+ * These functions operate on 32- or 64-bit specs depending on
+ * COMPAT_USE_64BIT_TIME, hence the void user pointer arguments and the
+ * naming as compat_get/put_ rather than get/put_compat_.
+ */
+extern int compat_get_timespec(struct timespec *, const void __user *);
+extern int compat_put_timespec(const struct timespec *, void __user *);
+extern int compat_get_timeval(struct timeval *, const void __user *);
+extern int compat_put_timeval(const struct timeval *, void __user *);
+
+struct compat_iovec {
+	compat_uptr_t	iov_base;
+	compat_size_t	iov_len;
+};
+
+struct compat_rlimit {
+	compat_ulong_t	rlim_cur;
+	compat_ulong_t	rlim_max;
+};
+
+struct compat_rusage {
+	struct compat_timeval ru_utime;
+	struct compat_timeval ru_stime;
+	compat_long_t	ru_maxrss;
+	compat_long_t	ru_ixrss;
+	compat_long_t	ru_idrss;
+	compat_long_t	ru_isrss;
+	compat_long_t	ru_minflt;
+	compat_long_t	ru_majflt;
+	compat_long_t	ru_nswap;
+	compat_long_t	ru_inblock;
+	compat_long_t	ru_oublock;
+	compat_long_t	ru_msgsnd;
+	compat_long_t	ru_msgrcv;
+	compat_long_t	ru_nsignals;
+	compat_long_t	ru_nvcsw;
+	compat_long_t	ru_nivcsw;
+};
+
+extern int put_compat_rusage(const struct rusage *,
+			     struct compat_rusage __user *);
+
+struct compat_siginfo;
+
+extern asmlinkage long compat_sys_waitid(int, compat_pid_t,
+		struct compat_siginfo __user *, int,
+		struct compat_rusage __user *);
+
+struct compat_dirent {
+	u32		d_ino;
+	compat_off_t	d_off;
+	u16		d_reclen;
+	char		d_name[256];
+};
+
+struct compat_ustat {
+	compat_daddr_t		f_tfree;
+	compat_ino_t		f_tinode;
+	char			f_fname[6];
+	char			f_fpack[6];
+};
+
+typedef union compat_sigval {
+	compat_int_t	sival_int;
+	compat_uptr_t	sival_ptr;
+} compat_sigval_t;
+
+#define COMPAT_SIGEV_PAD_SIZE	((SIGEV_MAX_SIZE/sizeof(int)) - 3)
+
+typedef struct compat_sigevent {
+	compat_sigval_t sigev_value;
+	compat_int_t sigev_signo;
+	compat_int_t sigev_notify;
+	union {
+		compat_int_t _pad[COMPAT_SIGEV_PAD_SIZE];
+		compat_int_t _tid;
+
+		struct {
+			compat_uptr_t _function;
+			compat_uptr_t _attribute;
+		} _sigev_thread;
+	} _sigev_un;
+} compat_sigevent_t;
+
+struct compat_ifmap {
+	compat_ulong_t mem_start;
+	compat_ulong_t mem_end;
+	unsigned short base_addr;
+	unsigned char irq;
+	unsigned char dma;
+	unsigned char port;
+};
+
+struct compat_if_settings {
+	unsigned int type;	/* Type of physical device or protocol */
+	unsigned int size;	/* Size of the data allocated by the caller */
+	compat_uptr_t ifs_ifsu;	/* union of pointers */
+};
+
+struct compat_ifreq {
+	union {
+		char	ifrn_name[IFNAMSIZ];    /* if name, e.g. "en0" */
+	} ifr_ifrn;
+	union {
+		struct	sockaddr ifru_addr;
+		struct	sockaddr ifru_dstaddr;
+		struct	sockaddr ifru_broadaddr;
+		struct	sockaddr ifru_netmask;
+		struct	sockaddr ifru_hwaddr;
+		short	ifru_flags;
+		compat_int_t	ifru_ivalue;
+		compat_int_t	ifru_mtu;
+		struct	compat_ifmap ifru_map;
+		char	ifru_slave[IFNAMSIZ];   /* Just fits the size */
+		char	ifru_newname[IFNAMSIZ];
+		compat_caddr_t	ifru_data;
+		struct	compat_if_settings ifru_settings;
+	} ifr_ifru;
+};
+
+struct compat_ifconf {
+	compat_int_t	ifc_len;                /* size of buffer */
+	compat_caddr_t  ifcbuf;
+};
+
+struct compat_robust_list {
+	compat_uptr_t			next;
+};
+
+struct compat_robust_list_head {
+	struct compat_robust_list	list;
+	compat_long_t			futex_offset;
+	compat_uptr_t			list_op_pending;
+};
+
+struct compat_statfs;
+struct compat_statfs64;
+struct compat_old_linux_dirent;
+struct compat_linux_dirent;
+struct linux_dirent64;
+struct compat_msghdr;
+struct compat_mmsghdr;
+struct compat_sysinfo;
+struct compat_sysctl_args;
+struct compat_kexec_segment;
+struct compat_mq_attr;
+struct compat_msgbuf;
+
+extern void compat_exit_robust_list(struct task_struct *curr);
+
+asmlinkage long
+compat_sys_set_robust_list(struct compat_robust_list_head __user *head,
+			   compat_size_t len);
+asmlinkage long
+compat_sys_get_robust_list(int pid, compat_uptr_t __user *head_ptr,
+			   compat_size_t __user *len_ptr);
+
+#ifdef CONFIG_ARCH_WANT_OLD_COMPAT_IPC
+long compat_sys_semctl(int first, int second, int third, void __user *uptr);
+long compat_sys_msgsnd(int first, int second, int third, void __user *uptr);
+long compat_sys_msgrcv(int first, int second, int msgtyp, int third,
+		int version, void __user *uptr);
+long compat_sys_shmat(int first, int second, compat_uptr_t third, int version,
+		void __user *uptr);
+#else
+long compat_sys_semctl(int semid, int semnum, int cmd, int arg);
+long compat_sys_msgsnd(int msqid, struct compat_msgbuf __user *msgp,
+		size_t msgsz, int msgflg);
+long compat_sys_msgrcv(int msqid, struct compat_msgbuf __user *msgp,
+		size_t msgsz, long msgtyp, int msgflg);
+long compat_sys_shmat(int shmid, compat_uptr_t shmaddr, int shmflg);
+#endif
+long compat_sys_msgctl(int first, int second, void __user *uptr);
+long compat_sys_shmctl(int first, int second, void __user *uptr);
+long compat_sys_semtimedop(int semid, struct sembuf __user *tsems,
+		unsigned nsems, const struct compat_timespec __user *timeout);
+asmlinkage long compat_sys_keyctl(u32 option,
+			      u32 arg2, u32 arg3, u32 arg4, u32 arg5);
+asmlinkage long compat_sys_ustat(unsigned dev, struct compat_ustat __user *u32);
+
+asmlinkage ssize_t compat_sys_readv(unsigned long fd,
+		const struct compat_iovec __user *vec, unsigned long vlen);
+asmlinkage ssize_t compat_sys_writev(unsigned long fd,
+		const struct compat_iovec __user *vec, unsigned long vlen);
+asmlinkage ssize_t compat_sys_preadv(unsigned long fd,
+		const struct compat_iovec __user *vec,
+		unsigned long vlen, u32 pos_low, u32 pos_high);
+asmlinkage ssize_t compat_sys_pwritev(unsigned long fd,
+		const struct compat_iovec __user *vec,
+		unsigned long vlen, u32 pos_low, u32 pos_high);
+
+int compat_do_execve(char *filename, compat_uptr_t __user *argv,
+		     compat_uptr_t __user *envp, struct pt_regs *regs);
+
+asmlinkage long compat_sys_select(int n, compat_ulong_t __user *inp,
+		compat_ulong_t __user *outp, compat_ulong_t __user *exp,
+		struct compat_timeval __user *tvp);
+
+asmlinkage long compat_sys_old_select(struct compat_sel_arg_struct __user *arg);
+
+asmlinkage long compat_sys_wait4(compat_pid_t pid,
+				 compat_uint_t __user *stat_addr, int options,
+				 struct compat_rusage __user *ru);
+
+#define BITS_PER_COMPAT_LONG    (8*sizeof(compat_long_t))
+
+#define BITS_TO_COMPAT_LONGS(bits) \
+	(((bits)+BITS_PER_COMPAT_LONG-1)/BITS_PER_COMPAT_LONG)
+
+long compat_get_bitmap(unsigned long *mask, const compat_ulong_t __user *umask,
+		       unsigned long bitmap_size);
+long compat_put_bitmap(compat_ulong_t __user *umask, unsigned long *mask,
+		       unsigned long bitmap_size);
+int copy_siginfo_from_user32(siginfo_t *to, struct compat_siginfo __user *from);
+int copy_siginfo_to_user32(struct compat_siginfo __user *to, siginfo_t *from);
+int get_compat_sigevent(struct sigevent *event,
+		const struct compat_sigevent __user *u_event);
+long compat_sys_rt_tgsigqueueinfo(compat_pid_t tgid, compat_pid_t pid, int sig,
+				  struct compat_siginfo __user *uinfo);
+
+static inline int compat_timeval_compare(struct compat_timeval *lhs,
+					struct compat_timeval *rhs)
+{
+	if (lhs->tv_sec < rhs->tv_sec)
+		return -1;
+	if (lhs->tv_sec > rhs->tv_sec)
+		return 1;
+	return lhs->tv_usec - rhs->tv_usec;
+}
+
+static inline int compat_timespec_compare(struct compat_timespec *lhs,
+					struct compat_timespec *rhs)
+{
+	if (lhs->tv_sec < rhs->tv_sec)
+		return -1;
+	if (lhs->tv_sec > rhs->tv_sec)
+		return 1;
+	return lhs->tv_nsec - rhs->tv_nsec;
+}
+
+extern int get_compat_itimerspec(struct itimerspec *dst,
+				 const struct compat_itimerspec __user *src);
+extern int put_compat_itimerspec(struct compat_itimerspec __user *dst,
+				 const struct itimerspec *src);
+
+asmlinkage long compat_sys_gettimeofday(struct compat_timeval __user *tv,
+		struct timezone __user *tz);
+asmlinkage long compat_sys_settimeofday(struct compat_timeval __user *tv,
+		struct timezone __user *tz);
+
+asmlinkage long compat_sys_adjtimex(struct compat_timex __user *utp);
+
+extern int compat_printk(const char *fmt, ...);
+extern void sigset_from_compat(sigset_t *set, compat_sigset_t *compat);
+
+asmlinkage long compat_sys_migrate_pages(compat_pid_t pid,
+		compat_ulong_t maxnode, const compat_ulong_t __user *old_nodes,
+		const compat_ulong_t __user *new_nodes);
+
+extern int compat_ptrace_request(struct task_struct *child,
+				 compat_long_t request,
+				 compat_ulong_t addr, compat_ulong_t data);
+
+extern long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
+			       compat_ulong_t addr, compat_ulong_t data);
+asmlinkage long compat_sys_ptrace(compat_long_t request, compat_long_t pid,
+				  compat_long_t addr, compat_long_t data);
+
+/*
+ * epoll (fs/eventpoll.c) compat bits follow ...
+ */
+struct epoll_event;
+#define compat_epoll_event	epoll_event
+asmlinkage long compat_sys_epoll_pwait(int epfd,
+			struct compat_epoll_event __user *events,
+			int maxevents, int timeout,
+			const compat_sigset_t __user *sigmask,
+			compat_size_t sigsetsize);
+
+asmlinkage long compat_sys_utime(const char __user *filename,
+				 struct compat_utimbuf __user *t);
+asmlinkage long compat_sys_utimensat(unsigned int dfd,
+				     const char __user *filename,
+				     struct compat_timespec __user *t,
+				     int flags);
+
+asmlinkage long compat_sys_time(compat_time_t __user *tloc);
+asmlinkage long compat_sys_stime(compat_time_t __user *tptr);
+asmlinkage long compat_sys_signalfd(int ufd,
+				    const compat_sigset_t __user *sigmask,
+				    compat_size_t sigsetsize);
+asmlinkage long compat_sys_timerfd_settime(int ufd, int flags,
+				   const struct compat_itimerspec __user *utmr,
+				   struct compat_itimerspec __user *otmr);
+asmlinkage long compat_sys_timerfd_gettime(int ufd,
+				   struct compat_itimerspec __user *otmr);
+
+asmlinkage long compat_sys_move_pages(pid_t pid, unsigned long nr_page,
+				      __u32 __user *pages,
+				      const int __user *nodes,
+				      int __user *status,
+				      int flags);
+asmlinkage long compat_sys_futimesat(unsigned int dfd,
+				     const char __user *filename,
+				     struct compat_timeval __user *t);
+asmlinkage long compat_sys_utimes(const char __user *filename,
+				  struct compat_timeval __user *t);
+asmlinkage long compat_sys_newstat(const char __user *filename,
+				   struct compat_stat __user *statbuf);
+asmlinkage long compat_sys_newlstat(const char __user *filename,
+				    struct compat_stat __user *statbuf);
+asmlinkage long compat_sys_newfstatat(unsigned int dfd,
+				      const char __user *filename,
+				      struct compat_stat __user *statbuf,
+				      int flag);
+asmlinkage long compat_sys_newfstat(unsigned int fd,
+				    struct compat_stat __user *statbuf);
+asmlinkage long compat_sys_statfs(const char __user *pathname,
+				  struct compat_statfs __user *buf);
+asmlinkage long compat_sys_fstatfs(unsigned int fd,
+				   struct compat_statfs __user *buf);
+asmlinkage long compat_sys_statfs64(const char __user *pathname,
+				    compat_size_t sz,
+				    struct compat_statfs64 __user *buf);
+asmlinkage long compat_sys_fstatfs64(unsigned int fd, compat_size_t sz,
+				     struct compat_statfs64 __user *buf);
+asmlinkage long compat_sys_fcntl64(unsigned int fd, unsigned int cmd,
+				   unsigned long arg);
+asmlinkage long compat_sys_fcntl(unsigned int fd, unsigned int cmd,
+				 unsigned long arg);
+asmlinkage long compat_sys_io_setup(unsigned nr_reqs, u32 __user *ctx32p);
+asmlinkage long compat_sys_io_getevents(aio_context_t ctx_id,
+					unsigned long min_nr,
+					unsigned long nr,
+					struct io_event __user *events,
+					struct compat_timespec __user *timeout);
+asmlinkage long compat_sys_io_submit(aio_context_t ctx_id, int nr,
+				     u32 __user *iocb);
+asmlinkage long compat_sys_mount(const char __user *dev_name,
+				 const char __user *dir_name,
+				 const char __user *type, unsigned long flags,
+				 const void __user *data);
+asmlinkage long compat_sys_old_readdir(unsigned int fd,
+				       struct compat_old_linux_dirent __user *,
+				       unsigned int count);
+asmlinkage long compat_sys_getdents(unsigned int fd,
+				    struct compat_linux_dirent __user *dirent,
+				    unsigned int count);
+asmlinkage long compat_sys_getdents64(unsigned int fd,
+				      struct linux_dirent64 __user *dirent,
+				      unsigned int count);
+asmlinkage long compat_sys_vmsplice(int fd, const struct compat_iovec __user *,
+				    unsigned int nr_segs, unsigned int flags);
+asmlinkage long compat_sys_open(const char __user *filename, int flags,
+				umode_t mode);
+asmlinkage long compat_sys_openat(unsigned int dfd, const char __user *filename,
+				  int flags, umode_t mode);
+asmlinkage long compat_sys_open_by_handle_at(int mountdirfd,
+					     struct file_handle __user *handle,
+					     int flags);
+asmlinkage long compat_sys_pselect6(int n, compat_ulong_t __user *inp,
+				    compat_ulong_t __user *outp,
+				    compat_ulong_t __user *exp,
+				    struct compat_timespec __user *tsp,
+				    void __user *sig);
+asmlinkage long compat_sys_ppoll(struct pollfd __user *ufds,
+				 unsigned int nfds,
+				 struct compat_timespec __user *tsp,
+				 const compat_sigset_t __user *sigmask,
+				 compat_size_t sigsetsize);
+asmlinkage long compat_sys_signalfd4(int ufd,
+				     const compat_sigset_t __user *sigmask,
+				     compat_size_t sigsetsize, int flags);
+asmlinkage long compat_sys_get_mempolicy(int __user *policy,
+					 compat_ulong_t __user *nmask,
+					 compat_ulong_t maxnode,
+					 compat_ulong_t addr,
+					 compat_ulong_t flags);
+asmlinkage long compat_sys_set_mempolicy(int mode, compat_ulong_t __user *nmask,
+					 compat_ulong_t maxnode);
+asmlinkage long compat_sys_mbind(compat_ulong_t start, compat_ulong_t len,
+				 compat_ulong_t mode,
+				 compat_ulong_t __user *nmask,
+				 compat_ulong_t maxnode, compat_ulong_t flags);
+
+asmlinkage long compat_sys_setsockopt(int fd, int level, int optname,
+				      char __user *optval, unsigned int optlen);
+asmlinkage long compat_sys_sendmsg(int fd, struct compat_msghdr __user *msg,
+				   unsigned flags);
+asmlinkage long compat_sys_sendmmsg(int fd, struct compat_mmsghdr __user *mmsg,
+				    unsigned vlen, unsigned int flags);
+asmlinkage long compat_sys_recvmsg(int fd, struct compat_msghdr __user *msg,
+				   unsigned int flags);
+asmlinkage long compat_sys_recv(int fd, void __user *buf, size_t len,
+				unsigned flags);
+asmlinkage long compat_sys_recvfrom(int fd, void __user *buf, size_t len,
+			    unsigned flags, struct sockaddr __user *addr,
+			    int __user *addrlen);
+asmlinkage long compat_sys_recvmmsg(int fd, struct compat_mmsghdr __user *mmsg,
+				    unsigned vlen, unsigned int flags,
+				    struct compat_timespec __user *timeout);
+asmlinkage long compat_sys_nanosleep(struct compat_timespec __user *rqtp,
+				     struct compat_timespec __user *rmtp);
+asmlinkage long compat_sys_getitimer(int which,
+				     struct compat_itimerval __user *it);
+asmlinkage long compat_sys_setitimer(int which,
+				     struct compat_itimerval __user *in,
+				     struct compat_itimerval __user *out);
+asmlinkage long compat_sys_times(struct compat_tms __user *tbuf);
+asmlinkage long compat_sys_setrlimit(unsigned int resource,
+				     struct compat_rlimit __user *rlim);
+asmlinkage long compat_sys_getrlimit(unsigned int resource,
+				     struct compat_rlimit __user *rlim);
+asmlinkage long compat_sys_getrusage(int who, struct compat_rusage __user *ru);
+asmlinkage long compat_sys_sched_setaffinity(compat_pid_t pid,
+				     unsigned int len,
+				     compat_ulong_t __user *user_mask_ptr);
+asmlinkage long compat_sys_sched_getaffinity(compat_pid_t pid,
+				     unsigned int len,
+				     compat_ulong_t __user *user_mask_ptr);
+asmlinkage long compat_sys_timer_create(clockid_t which_clock,
+			struct compat_sigevent __user *timer_event_spec,
+			timer_t __user *created_timer_id);
+asmlinkage long compat_sys_timer_settime(timer_t timer_id, int flags,
+					 struct compat_itimerspec __user *new,
+					 struct compat_itimerspec __user *old);
+asmlinkage long compat_sys_timer_gettime(timer_t timer_id,
+				 struct compat_itimerspec __user *setting);
+asmlinkage long compat_sys_clock_settime(clockid_t which_clock,
+					 struct compat_timespec __user *tp);
+asmlinkage long compat_sys_clock_gettime(clockid_t which_clock,
+					 struct compat_timespec __user *tp);
+asmlinkage long compat_sys_clock_adjtime(clockid_t which_clock,
+					 struct compat_timex __user *tp);
+asmlinkage long compat_sys_clock_getres(clockid_t which_clock,
+					struct compat_timespec __user *tp);
+asmlinkage long compat_sys_clock_nanosleep(clockid_t which_clock, int flags,
+					   struct compat_timespec __user *rqtp,
+					   struct compat_timespec __user *rmtp);
+asmlinkage long compat_sys_rt_sigtimedwait(compat_sigset_t __user *uthese,
+		struct compat_siginfo __user *uinfo,
+		struct compat_timespec __user *uts, compat_size_t sigsetsize);
+asmlinkage long compat_sys_rt_sigsuspend(compat_sigset_t __user *unewset,
+					 compat_size_t sigsetsize);
+asmlinkage long compat_sys_sysinfo(struct compat_sysinfo __user *info);
+asmlinkage long compat_sys_ioctl(unsigned int fd, unsigned int cmd,
+				 unsigned long arg);
+asmlinkage long compat_sys_futex(u32 __user *uaddr, int op, u32 val,
+		struct compat_timespec __user *utime, u32 __user *uaddr2,
+		u32 val3);
+asmlinkage long compat_sys_getsockopt(int fd, int level, int optname,
+				      char __user *optval, int __user *optlen);
+asmlinkage long compat_sys_kexec_load(unsigned long entry,
+				      unsigned long nr_segments,
+				      struct compat_kexec_segment __user *,
+				      unsigned long flags);
+asmlinkage long compat_sys_mq_getsetattr(mqd_t mqdes,
+			const struct compat_mq_attr __user *u_mqstat,
+			struct compat_mq_attr __user *u_omqstat);
+asmlinkage long compat_sys_mq_notify(mqd_t mqdes,
+			const struct compat_sigevent __user *u_notification);
+asmlinkage long compat_sys_mq_open(const char __user *u_name,
+			int oflag, compat_mode_t mode,
+			struct compat_mq_attr __user *u_attr);
+asmlinkage long compat_sys_mq_timedsend(mqd_t mqdes,
+			const char __user *u_msg_ptr,
+			size_t msg_len, unsigned int msg_prio,
+			const struct compat_timespec __user *u_abs_timeout);
+asmlinkage ssize_t compat_sys_mq_timedreceive(mqd_t mqdes,
+			char __user *u_msg_ptr,
+			size_t msg_len, unsigned int __user *u_msg_prio,
+			const struct compat_timespec __user *u_abs_timeout);
+asmlinkage long compat_sys_socketcall(int call, u32 __user *args);
+asmlinkage long compat_sys_sysctl(struct compat_sysctl_args __user *args);
+
+extern ssize_t compat_rw_copy_check_uvector(int type,
+		const struct compat_iovec __user *uvector,
+		unsigned long nr_segs,
+		unsigned long fast_segs, struct iovec *fast_pointer,
+		struct iovec **ret_pointer,
+		int check_access);
+
+extern void __user *compat_alloc_user_space(unsigned long len);
+
+asmlinkage ssize_t compat_sys_process_vm_readv(compat_pid_t pid,
+		const struct compat_iovec __user *lvec,
+		unsigned long liovcnt, const struct compat_iovec __user *rvec,
+		unsigned long riovcnt, unsigned long flags);
+asmlinkage ssize_t compat_sys_process_vm_writev(compat_pid_t pid,
+		const struct compat_iovec __user *lvec,
+		unsigned long liovcnt, const struct compat_iovec __user *rvec,
+		unsigned long riovcnt, unsigned long flags);
+
+#else
+
+#define is_compat_task() (0)
+
+#endif /* CONFIG_COMPAT */
+#endif /* _LINUX_COMPAT_H */
diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h
new file mode 100644
index 00000000..e5834aa2
--- /dev/null
+++ b/include/linux/compiler-gcc.h
@@ -0,0 +1,112 @@
+#ifndef __LINUX_COMPILER_H
+#error "Please don't include <linux/compiler-gcc.h> directly, include <linux/compiler.h> instead."
+#endif
+
+/*
+ * Common definitions for all gcc versions go here.
+ */
+
+
+/* Optimization barrier */
+/* The "volatile" is due to gcc bugs */
+#define barrier() __asm__ __volatile__("": : :"memory")
+
+/*
+ * This macro obfuscates arithmetic on a variable address so that gcc
+ * shouldn't recognize the original var, and make assumptions about it.
+ *
+ * This is needed because the C standard makes it undefined to do
+ * pointer arithmetic on "objects" outside their boundaries and the
+ * gcc optimizers assume this is the case. In particular they
+ * assume such arithmetic does not wrap.
+ *
+ * A miscompilation has been observed because of this on PPC.
+ * To work around it we hide the relationship of the pointer and the object
+ * using this macro.
+ *
+ * Versions of the ppc64 compiler before 4.1 had a bug where use of
+ * RELOC_HIDE could trash r30. The bug can be worked around by changing
+ * the inline assembly constraint from =g to =r, in this particular
+ * case either is valid.
+ */
+#define RELOC_HIDE(ptr, off)					\
+  ({ unsigned long __ptr;					\
+    __asm__ ("" : "=r"(__ptr) : "0"(ptr));		\
+    (typeof(ptr)) (__ptr + (off)); })
+
+#ifdef __CHECKER__
+#define __must_be_array(arr) 0
+#else
+/* &a[0] degrades to a pointer: a different type from an array */
+#define __must_be_array(a) BUILD_BUG_ON_ZERO(__same_type((a), &(a)[0]))
+#endif
+
+/*
+ * Force always-inline if the user requests it so via the .config,
+ * or if gcc is too old:
+ */
+#if !defined(CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING) || \
+    !defined(CONFIG_OPTIMIZE_INLINING) || (__GNUC__ < 4)
+# define inline		inline		__attribute__((always_inline))
+# define __inline__	__inline__	__attribute__((always_inline))
+# define __inline	__inline	__attribute__((always_inline))
+#else
+/* A lot of inline functions can cause havoc with function tracing */
+# define inline		inline		notrace
+# define __inline__	__inline__	notrace
+# define __inline	__inline	notrace
+#endif
+
+#define __deprecated			__attribute__((deprecated))
+#define __packed			__attribute__((packed))
+#define __weak				__attribute__((weak))
+
+/*
+ * it doesn't make sense on ARM (currently the only user of __naked) to trace
+ * naked functions because then mcount is called without stack and frame pointer
+ * being set up and there is no chance to restore the lr register to the value
+ * before mcount was called.
+ *
+ * The asm() bodies of naked functions often depend on standard calling conventions,
+ * therefore they must be noinline and noclone.  GCC 4.[56] currently fail to enforce
+ * this, so we must do so ourselves.  See GCC PR44290.
+ */
+#define __naked				__attribute__((naked)) noinline __noclone notrace
+
+#define __noreturn			__attribute__((noreturn))
+
+/*
+ * From the GCC manual:
+ *
+ * Many functions have no effects except the return value and their
+ * return value depends only on the parameters and/or global
+ * variables.  Such a function can be subject to common subexpression
+ * elimination and loop optimization just as an arithmetic operator
+ * would be.
+ * [...]
+ */
+#define __pure				__attribute__((pure))
+#define __aligned(x)			__attribute__((aligned(x)))
+#define __printf(a, b)			__attribute__((format(printf, a, b)))
+#define __scanf(a, b)			__attribute__((format(scanf, a, b)))
+#define  noinline			__attribute__((noinline))
+#define __attribute_const__		__attribute__((__const__))
+#define __maybe_unused			__attribute__((unused))
+#define __always_unused			__attribute__((unused))
+
+#define __gcc_header(x) #x
+#define _gcc_header(x) __gcc_header(linux/compiler-gcc##x.h)
+#define gcc_header(x) _gcc_header(x)
+#include gcc_header(__GNUC__)
+
+#if !defined(__noclone)
+#define __noclone	/* not needed */
+#endif
+
+/*
+ * A trick to suppress uninitialized variable warning without generating any
+ * code
+ */
+#define uninitialized_var(x) x = x
+
+#define __always_inline		inline __attribute__((always_inline))
diff --git a/include/linux/compiler-gcc3.h b/include/linux/compiler-gcc3.h
new file mode 100644
index 00000000..37d41243
--- /dev/null
+++ b/include/linux/compiler-gcc3.h
@@ -0,0 +1,23 @@
+#ifndef __LINUX_COMPILER_H
+#error "Please don't include <linux/compiler-gcc3.h> directly, include <linux/compiler.h> instead."
+#endif
+
+#if __GNUC_MINOR__ < 2
+# error Sorry, your compiler is too old - please upgrade it.
+#endif
+
+#if __GNUC_MINOR__ >= 3
+# define __used			__attribute__((__used__))
+#else
+# define __used			__attribute__((__unused__))
+#endif
+
+#if __GNUC_MINOR__ >= 4
+#define __must_check		__attribute__((warn_unused_result))
+#endif
+
+#ifdef CONFIG_GCOV_KERNEL
+# if __GNUC_MINOR__ < 4
+#   error "GCOV profiling support for gcc versions below 3.4 not included"
+# endif /* __GNUC_MINOR__ */
+#endif /* CONFIG_GCOV_KERNEL */
diff --git a/include/linux/compiler-gcc4.h b/include/linux/compiler-gcc4.h
new file mode 100644
index 00000000..2f407917
--- /dev/null
+++ b/include/linux/compiler-gcc4.h
@@ -0,0 +1,58 @@
+#ifndef __LINUX_COMPILER_H
+#error "Please don't include <linux/compiler-gcc4.h> directly, include <linux/compiler.h> instead."
+#endif
+
+/* GCC 4.1.[01] miscompiles __weak */
+#ifdef __KERNEL__
+# if __GNUC_MINOR__ == 1 && __GNUC_PATCHLEVEL__ <= 1
+#  error Your version of gcc miscompiles the __weak directive
+# endif
+#endif
+
+#define __used			__attribute__((__used__))
+#define __must_check 		__attribute__((warn_unused_result))
+#define __compiler_offsetof(a,b) __builtin_offsetof(a,b)
+
+#if __GNUC_MINOR__ >= 3
+/* Mark functions as cold. gcc will assume any path leading to a call
+   to them will be unlikely.  This means a lot of manual unlikely()s
+   are unnecessary now for any paths leading to the usual suspects
+   like BUG(), printk(), panic() etc. [but let's keep them for now for
+   older compilers]
+
+   Early snapshots of gcc 4.3 don't support this and we can't detect this
+   in the preprocessor, but we can live with this because they're unreleased.
+   Maketime probing would be overkill here.
+
+   gcc also has a __attribute__((__hot__)) to move hot functions into
+   a special section, but I don't see any sense in this right now in
+   the kernel context */
+#define __cold			__attribute__((__cold__))
+
+#define __linktime_error(message) __attribute__((__error__(message)))
+
+#if __GNUC_MINOR__ >= 5
+/*
+ * Mark a position in code as unreachable.  This can be used to
+ * suppress control flow warnings after asm blocks that transfer
+ * control elsewhere.
+ *
+ * Early snapshots of gcc 4.5 don't support this and we can't detect
+ * this in the preprocessor, but we can live with this because they're
+ * unreleased.  Really, we need to have autoconf for the kernel.
+ */
+#define unreachable() __builtin_unreachable()
+
+/* Mark a function definition as prohibited from being cloned. */
+#define __noclone	__attribute__((__noclone__))
+
+#endif
+#endif
+
+#if __GNUC_MINOR__ > 0
+#define __compiletime_object_size(obj) __builtin_object_size(obj, 0)
+#endif
+#if __GNUC_MINOR__ >= 4 && !defined(__CHECKER__)
+#define __compiletime_warning(message) __attribute__((warning(message)))
+#define __compiletime_error(message) __attribute__((error(message)))
+#endif
diff --git a/include/linux/compiler-intel.h b/include/linux/compiler-intel.h
new file mode 100644
index 00000000..d8e636e5
--- /dev/null
+++ b/include/linux/compiler-intel.h
@@ -0,0 +1,31 @@
+#ifndef __LINUX_COMPILER_H
+#error "Please don't include <linux/compiler-intel.h> directly, include <linux/compiler.h> instead."
+#endif
+
+#ifdef __ECC
+
+/* Some compiler specific definitions are overwritten here
+ * for Intel ECC compiler
+ */
+
+#include <asm/intrinsics.h>
+
+/* Intel ECC compiler doesn't support gcc specific asm stmts.
+ * It uses intrinsics to do the equivalent things.
+ */
+#undef barrier
+#undef RELOC_HIDE
+
+#define barrier() __memory_barrier()
+
+#define RELOC_HIDE(ptr, off)					\
+  ({ unsigned long __ptr;					\
+     __ptr = (unsigned long) (ptr);				\
+    (typeof(ptr)) (__ptr + (off)); })
+
+/* Intel ECC compiler doesn't support __builtin_types_compatible_p() */
+#define __must_be_array(a) 0
+
+#endif
+
+#define uninitialized_var(x) x
diff --git a/include/linux/compiler.h b/include/linux/compiler.h
new file mode 100644
index 00000000..923d093c
--- /dev/null
+++ b/include/linux/compiler.h
@@ -0,0 +1,313 @@
+#ifndef __LINUX_COMPILER_H
+#define __LINUX_COMPILER_H
+
+#ifndef __ASSEMBLY__
+
+#ifdef __CHECKER__
+# define __user		__attribute__((noderef, address_space(1)))
+# define __kernel	__attribute__((address_space(0)))
+# define __safe		__attribute__((safe))
+# define __force	__attribute__((force))
+# define __nocast	__attribute__((nocast))
+# define __iomem	__attribute__((noderef, address_space(2)))
+# define __acquires(x)	__attribute__((context(x,0,1)))
+# define __releases(x)	__attribute__((context(x,1,0)))
+# define __acquire(x)	__context__(x,1)
+# define __release(x)	__context__(x,-1)
+# define __cond_lock(x,c)	((c) ? ({ __acquire(x); 1; }) : 0)
+# define __percpu	__attribute__((noderef, address_space(3)))
+#ifdef CONFIG_SPARSE_RCU_POINTER
+# define __rcu		__attribute__((noderef, address_space(4)))
+#else
+# define __rcu
+#endif
+extern void __chk_user_ptr(const volatile void __user *);
+extern void __chk_io_ptr(const volatile void __iomem *);
+#else
+# define __user
+# define __kernel
+# define __safe
+# define __force
+# define __nocast
+# define __iomem
+# define __chk_user_ptr(x) (void)0
+# define __chk_io_ptr(x) (void)0
+# define __builtin_warning(x, y...) (1)
+# define __acquires(x)
+# define __releases(x)
+# define __acquire(x) (void)0
+# define __release(x) (void)0
+# define __cond_lock(x,c) (c)
+# define __percpu
+# define __rcu
+#endif
+
+#ifdef __KERNEL__
+
+#ifdef __GNUC__
+#include <linux/compiler-gcc.h>
+#endif
+
+#define notrace __attribute__((no_instrument_function))
+
+/* Intel compiler defines __GNUC__. So we will overwrite implementations
+ * coming from above header files here
+ */
+#ifdef __INTEL_COMPILER
+# include <linux/compiler-intel.h>
+#endif
+
+/*
+ * Generic compiler-dependent macros required for kernel
+ * build go below this comment. Actual compiler/compiler version
+ * specific implementations come from the above header files
+ */
+
+struct ftrace_branch_data {
+	const char *func;
+	const char *file;
+	unsigned line;
+	union {
+		struct {
+			unsigned long correct;
+			unsigned long incorrect;
+		};
+		struct {
+			unsigned long miss;
+			unsigned long hit;
+		};
+		unsigned long miss_hit[2];
+	};
+};
+
+/*
+ * Note: DISABLE_BRANCH_PROFILING can be used by special lowlevel code
+ * to disable branch tracing on a per file basis.
+ */
+#if defined(CONFIG_TRACE_BRANCH_PROFILING) \
+    && !defined(DISABLE_BRANCH_PROFILING) && !defined(__CHECKER__)
+void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect);
+
+#define likely_notrace(x)	__builtin_expect(!!(x), 1)
+#define unlikely_notrace(x)	__builtin_expect(!!(x), 0)
+
+#define __branch_check__(x, expect) ({					\
+			int ______r;					\
+			static struct ftrace_branch_data		\
+				__attribute__((__aligned__(4)))		\
+				__attribute__((section("_ftrace_annotated_branch"))) \
+				______f = {				\
+				.func = __func__,			\
+				.file = __FILE__,			\
+				.line = __LINE__,			\
+			};						\
+			______r = likely_notrace(x);			\
+			ftrace_likely_update(&______f, ______r, expect); \
+			______r;					\
+		})
+
+/*
+ * Using __builtin_constant_p(x) to ignore cases where the return
+ * value is always the same.  This idea is taken from a similar patch
+ * written by Daniel Walker.
+ */
+# ifndef likely
+#  define likely(x)	(__builtin_constant_p(x) ? !!(x) : __branch_check__(x, 1))
+# endif
+# ifndef unlikely
+#  define unlikely(x)	(__builtin_constant_p(x) ? !!(x) : __branch_check__(x, 0))
+# endif
+
+#ifdef CONFIG_PROFILE_ALL_BRANCHES
+/*
+ * "Define 'is'", Bill Clinton
+ * "Define 'if'", Steven Rostedt
+ */
+#define if(cond, ...) __trace_if( (cond , ## __VA_ARGS__) )
+#define __trace_if(cond) \
+	if (__builtin_constant_p((cond)) ? !!(cond) :			\
+	({								\
+		int ______r;						\
+		static struct ftrace_branch_data			\
+			__attribute__((__aligned__(4)))			\
+			__attribute__((section("_ftrace_branch")))	\
+			______f = {					\
+				.func = __func__,			\
+				.file = __FILE__,			\
+				.line = __LINE__,			\
+			};						\
+		______r = !!(cond);					\
+		______f.miss_hit[______r]++;					\
+		______r;						\
+	}))
+#endif /* CONFIG_PROFILE_ALL_BRANCHES */
+
+#else
+# define likely(x)	__builtin_expect(!!(x), 1)
+# define unlikely(x)	__builtin_expect(!!(x), 0)
+#endif
+
+/* Optimization barrier */
+#ifndef barrier
+# define barrier() __memory_barrier()
+#endif
+
+/* Unreachable code */
+#ifndef unreachable
+# define unreachable() do { } while (1)
+#endif
+
+#ifndef RELOC_HIDE
+# define RELOC_HIDE(ptr, off)					\
+  ({ unsigned long __ptr;					\
+     __ptr = (unsigned long) (ptr);				\
+    (typeof(ptr)) (__ptr + (off)); })
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+/*
+ * Allow us to mark functions as 'deprecated' and have gcc emit a nice
+ * warning for each use, in hopes of speeding the functions removal.
+ * Usage is:
+ * 		int __deprecated foo(void)
+ */
+#ifndef __deprecated
+# define __deprecated		/* unimplemented */
+#endif
+
+#ifdef MODULE
+#define __deprecated_for_modules __deprecated
+#else
+#define __deprecated_for_modules
+#endif
+
+#ifndef __must_check
+#define __must_check
+#endif
+
+#ifndef CONFIG_ENABLE_MUST_CHECK
+#undef __must_check
+#define __must_check
+#endif
+#ifndef CONFIG_ENABLE_WARN_DEPRECATED
+#undef __deprecated
+#undef __deprecated_for_modules
+#define __deprecated
+#define __deprecated_for_modules
+#endif
+
+/*
+ * Allow us to avoid 'defined but not used' warnings on functions and data,
+ * as well as force them to be emitted to the assembly file.
+ *
+ * As of gcc 3.4, static functions that are not marked with attribute((used))
+ * may be elided from the assembly file.  As of gcc 3.4, static data not so
+ * marked will not be elided, but this may change in a future gcc version.
+ *
+ * NOTE: Because distributions shipped with a backported unit-at-a-time
+ * compiler in gcc 3.3, we must define __used to be __attribute__((used))
+ * for gcc >=3.3 instead of 3.4.
+ *
+ * In prior versions of gcc, such functions and data would be emitted, but
+ * would be warned about except with attribute((unused)).
+ *
+ * Mark functions that are referenced only in inline assembly as __used so
+ * the code is emitted even though it appears to be unreferenced.
+ */
+#ifndef __used
+# define __used			/* unimplemented */
+#endif
+
+#ifndef __maybe_unused
+# define __maybe_unused		/* unimplemented */
+#endif
+
+#ifndef __always_unused
+# define __always_unused	/* unimplemented */
+#endif
+
+#ifndef noinline
+#define noinline
+#endif
+
+/*
+ * Rather then using noinline to prevent stack consumption, use
+ * noinline_for_stack instead.  For documentation reasons.
+ */
+#define noinline_for_stack noinline
+
+#ifndef __always_inline
+#define __always_inline inline
+#endif
+
+#endif /* __KERNEL__ */
+
+/*
+ * From the GCC manual:
+ *
+ * Many functions do not examine any values except their arguments,
+ * and have no effects except the return value.  Basically this is
+ * just slightly more strict class than the `pure' attribute above,
+ * since function is not allowed to read global memory.
+ *
+ * Note that a function that has pointer arguments and examines the
+ * data pointed to must _not_ be declared `const'.  Likewise, a
+ * function that calls a non-`const' function usually must not be
+ * `const'.  It does not make sense for a `const' function to return
+ * `void'.
+ */
+#ifndef __attribute_const__
+# define __attribute_const__	/* unimplemented */
+#endif
+
+/*
+ * Tell gcc if a function is cold. The compiler will assume any path
+ * directly leading to the call is unlikely.
+ */
+
+#ifndef __cold
+#define __cold
+#endif
+
+/* Simple shorthand for a section definition */
+#ifndef __section
+# define __section(S) __attribute__ ((__section__(#S)))
+#endif
+
+/* Are two types/vars the same type (ignoring qualifiers)? */
+#ifndef __same_type
+# define __same_type(a, b) __builtin_types_compatible_p(typeof(a), typeof(b))
+#endif
+
+/* Compile time object size, -1 for unknown */
+#ifndef __compiletime_object_size
+# define __compiletime_object_size(obj) -1
+#endif
+#ifndef __compiletime_warning
+# define __compiletime_warning(message)
+#endif
+#ifndef __compiletime_error
+# define __compiletime_error(message)
+#endif
+#ifndef __linktime_error
+# define __linktime_error(message)
+#endif
+/*
+ * Prevent the compiler from merging or refetching accesses.  The compiler
+ * is also forbidden from reordering successive instances of ACCESS_ONCE(),
+ * but only when the compiler is aware of some particular ordering.  One way
+ * to make the compiler aware of ordering is to put the two invocations of
+ * ACCESS_ONCE() in different C statements.
+ *
+ * This macro does absolutely -nothing- to prevent the CPU from reordering,
+ * merging, or refetching absolutely anything at any time.  Its main intended
+ * use is to mediate communication between process-level code and irq/NMI
+ * handlers, all running on the same CPU.
+ */
+#define ACCESS_ONCE(x) (*(volatile typeof(x) *)&(x))
+
+#endif /* __LINUX_COMPILER_H */
diff --git a/include/linux/completion.h b/include/linux/completion.h
new file mode 100644
index 00000000..51494e6b
--- /dev/null
+++ b/include/linux/completion.h
@@ -0,0 +1,104 @@
+#ifndef __LINUX_COMPLETION_H
+#define __LINUX_COMPLETION_H
+
+/*
+ * (C) Copyright 2001 Linus Torvalds
+ *
+ * Atomic wait-for-completion handler data structures.
+ * See kernel/sched.c for details.
+ */
+
+#include <linux/wait.h>
+
+/*
+ * struct completion - structure used to maintain state for a "completion"
+ *
+ * This is the opaque structure used to maintain the state for a "completion".
+ * Completions currently use a FIFO to queue threads that have to wait for
+ * the "completion" event.
+ *
+ * See also:  complete(), wait_for_completion() (and friends _timeout,
+ * _interruptible, _interruptible_timeout, and _killable), init_completion(),
+ * and macros DECLARE_COMPLETION(), DECLARE_COMPLETION_ONSTACK(), and
+ * INIT_COMPLETION().
+ */
+struct completion {
+	unsigned int done;
+	wait_queue_head_t wait;
+};
+
+#define COMPLETION_INITIALIZER(work) \
+	{ 0, __WAIT_QUEUE_HEAD_INITIALIZER((work).wait) }
+
+#define COMPLETION_INITIALIZER_ONSTACK(work) \
+	({ init_completion(&work); work; })
+
+/**
+ * DECLARE_COMPLETION - declare and initialize a completion structure
+ * @work:  identifier for the completion structure
+ *
+ * This macro declares and initializes a completion structure. Generally used
+ * for static declarations. You should use the _ONSTACK variant for automatic
+ * variables.
+ */
+#define DECLARE_COMPLETION(work) \
+	struct completion work = COMPLETION_INITIALIZER(work)
+
+/*
+ * Lockdep needs to run a non-constant initializer for on-stack
+ * completions - so we use the _ONSTACK() variant for those that
+ * are on the kernel stack:
+ */
+/**
+ * DECLARE_COMPLETION_ONSTACK - declare and initialize a completion structure
+ * @work:  identifier for the completion structure
+ *
+ * This macro declares and initializes a completion structure on the kernel
+ * stack.
+ */
+#ifdef CONFIG_LOCKDEP
+# define DECLARE_COMPLETION_ONSTACK(work) \
+	struct completion work = COMPLETION_INITIALIZER_ONSTACK(work)
+#else
+# define DECLARE_COMPLETION_ONSTACK(work) DECLARE_COMPLETION(work)
+#endif
+
+/**
+ * init_completion - Initialize a dynamically allocated completion
+ * @x:  completion structure that is to be initialized
+ *
+ * This inline function will initialize a dynamically created completion
+ * structure.
+ */
+static inline void init_completion(struct completion *x)
+{
+	x->done = 0;
+	init_waitqueue_head(&x->wait);
+}
+
+extern void wait_for_completion(struct completion *);
+extern int wait_for_completion_interruptible(struct completion *x);
+extern int wait_for_completion_killable(struct completion *x);
+extern unsigned long wait_for_completion_timeout(struct completion *x,
+						   unsigned long timeout);
+extern long wait_for_completion_interruptible_timeout(
+	struct completion *x, unsigned long timeout);
+extern long wait_for_completion_killable_timeout(
+	struct completion *x, unsigned long timeout);
+extern bool try_wait_for_completion(struct completion *x);
+extern bool completion_done(struct completion *x);
+
+extern void complete(struct completion *);
+extern void complete_all(struct completion *);
+
+/**
+ * INIT_COMPLETION - reinitialize a completion structure
+ * @x:  completion structure to be reinitialized
+ *
+ * This macro should be used to reinitialize a completion structure so it can
+ * be reused. This is especially important after complete_all() is used.
+ */
+#define INIT_COMPLETION(x)	((x).done = 0)
+
+
+#endif
diff --git a/include/linux/comstats.h b/include/linux/comstats.h
new file mode 100644
index 00000000..3f5ea8e8
--- /dev/null
+++ b/include/linux/comstats.h
@@ -0,0 +1,119 @@
+/*****************************************************************************/
+
+/*
+ *	comstats.h  -- Serial Port Stats.
+ *
+ *	Copyright (C) 1996-1998  Stallion Technologies
+ *	Copyright (C) 1994-1996  Greg Ungerer.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License
+ *	along with this program; if not, write to the Free Software
+ *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*****************************************************************************/
+#ifndef	_COMSTATS_H
+#define	_COMSTATS_H
+/*****************************************************************************/
+
+/*
+ *	Serial port stats structure. The structure itself is UART
+ *	independent, but some fields may be UART/driver specific (for
+ *	example state).
+ */
+
+typedef struct {
+	unsigned long	brd;
+	unsigned long	panel;
+	unsigned long	port;
+	unsigned long	hwid;
+	unsigned long	type;
+	unsigned long	txtotal;
+	unsigned long	rxtotal;
+	unsigned long	txbuffered;
+	unsigned long	rxbuffered;
+	unsigned long	rxoverrun;
+	unsigned long	rxparity;
+	unsigned long	rxframing;
+	unsigned long	rxlost;
+	unsigned long	txbreaks;
+	unsigned long	rxbreaks;
+	unsigned long	txxon;
+	unsigned long	txxoff;
+	unsigned long	rxxon;
+	unsigned long	rxxoff;
+	unsigned long	txctson;
+	unsigned long	txctsoff;
+	unsigned long	rxrtson;
+	unsigned long	rxrtsoff;
+	unsigned long	modem;
+	unsigned long	state;
+	unsigned long	flags;
+	unsigned long	ttystate;
+	unsigned long	cflags;
+	unsigned long	iflags;
+	unsigned long	oflags;
+	unsigned long	lflags;
+	unsigned long	signals;
+} comstats_t;
+
+
+/*
+ *	Board stats structure. Returns useful info about the board.
+ */
+
+#define	COM_MAXPANELS	8
+
+typedef struct {
+	unsigned long	panel;
+	unsigned long	type;
+	unsigned long	hwid;
+	unsigned long	nrports;
+} companel_t;
+
+typedef struct {
+	unsigned long	brd;
+	unsigned long	type;
+	unsigned long	hwid;
+	unsigned long	state;
+	unsigned long	ioaddr;
+	unsigned long	ioaddr2;
+	unsigned long	memaddr;
+	unsigned long	irq;
+	unsigned long	nrpanels;
+	unsigned long	nrports;
+	companel_t	panels[COM_MAXPANELS];
+} combrd_t;
+
+
+/*
+ *	Define the ioctl operations for stats stuff.
+ */
+#include <linux/ioctl.h>
+
+#define	COM_GETPORTSTATS	_IO('c',30)
+#define	COM_CLRPORTSTATS	_IO('c',31)
+#define	COM_GETBRDSTATS		_IO('c',32)
+
+
+/*
+ *	Define the set of ioctls that give user level access to the
+ *	private port, panel and board structures. The argument required
+ *	will be driver dependent!  
+ */
+#define	COM_READPORT		_IO('c',40)
+#define	COM_READBOARD		_IO('c',41)
+#define	COM_READPANEL		_IO('c',42)
+
+/*****************************************************************************/
+#endif
diff --git a/include/linux/concap.h b/include/linux/concap.h
new file mode 100644
index 00000000..977acb3d
--- /dev/null
+++ b/include/linux/concap.h
@@ -0,0 +1,112 @@
+/* $Id: concap.h,v 1.3.2.2 2004/01/12 23:08:35 keil Exp $
+ *
+ * Copyright 1997 by Henner Eisen <eis@baty.hanse.de>
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ */
+
+#ifndef _LINUX_CONCAP_H
+#define _LINUX_CONCAP_H
+
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+
+/* Stuff to support encapsulation protocols genericly. The encapsulation
+   protocol is processed at the uppermost layer of the network interface.
+
+   Based on a ideas developed in a 'synchronous device' thread in the
+   linux-x25 mailing list contributed by Alan Cox, Thomasz Motylewski
+   and Jonathan Naylor.
+
+   For more documetation on this refer to Documentation/isdn/README.concap
+*/
+
+struct concap_proto_ops;
+struct concap_device_ops;
+
+/* this manages all data needed by the encapsulation protocol
+ */
+struct concap_proto{
+	struct net_device *net_dev;	/* net device using our service  */
+	struct concap_device_ops *dops;	/* callbacks provided by device */
+ 	struct concap_proto_ops  *pops;	/* callbacks provided by us */
+ 	spinlock_t lock;
+	int flags;
+	void *proto_data;		/* protocol specific private data, to
+					   be accessed via *pops methods only*/
+	/*
+	  :
+	  whatever 
+	  :
+	  */
+};
+
+/* Operations to be supported by the net device. Called by the encapsulation
+ * protocol entity. No receive method is offered because the encapsulation
+ * protocol directly calls netif_rx().
+ */
+struct concap_device_ops{
+
+	/* to request data is submitted by device*/ 
+	int (*data_req)(struct concap_proto *, struct sk_buff *);
+
+	/* Control methods must be set to NULL by devices which do not
+	   support connection control.*/
+	/* to request a connection is set up */ 
+	int (*connect_req)(struct concap_proto *);
+
+	/* to request a connection is released */
+	int (*disconn_req)(struct concap_proto *);	
+};
+
+/* Operations to be supported by the encapsulation protocol. Called by
+ * device driver.
+ */
+struct concap_proto_ops{
+
+	/* create a new encapsulation protocol instance of same type */
+	struct concap_proto *  (*proto_new) (void);
+
+	/* delete encapsulation protocol instance and free all its resources.
+	   cprot may no loger be referenced after calling this */
+	void (*proto_del)(struct concap_proto *cprot);
+
+	/* initialize the protocol's data. To be called at interface startup
+	   or when the device driver resets the interface. All services of the
+	   encapsulation protocol may be used after this*/
+	int (*restart)(struct concap_proto *cprot, 
+		       struct net_device *ndev,
+		       struct concap_device_ops *dops);
+
+	/* inactivate an encapsulation protocol instance. The encapsulation
+	   protocol may not call any *dops methods after this. */
+	int (*close)(struct concap_proto *cprot);
+
+	/* process a frame handed down to us by upper layer */
+	int (*encap_and_xmit)(struct concap_proto *cprot, struct sk_buff *skb);
+
+	/* to be called for each data entity received from lower layer*/ 
+	int (*data_ind)(struct concap_proto *cprot, struct sk_buff *skb);
+
+	/* to be called when a connection was set up/down.
+	   Protocols that don't process these primitives might fill in
+	   dummy methods here */
+	int (*connect_ind)(struct concap_proto *cprot);
+	int (*disconn_ind)(struct concap_proto *cprot);
+  /*
+    Some network device support functions, like net_header(), rebuild_header(),
+    and others, that depend solely on the encapsulation protocol, might
+    be provided here, too. The net device would just fill them in its
+    corresponding fields when it is opened.
+    */
+};
+
+/* dummy restart/close/connect/reset/disconn methods
+ */
+extern int concap_nop(struct concap_proto *cprot); 
+
+/* dummy submit method
+ */
+extern int concap_drop_skb(struct concap_proto *cprot, struct sk_buff *skb);
+#endif
diff --git a/include/linux/configfs.h b/include/linux/configfs.h
new file mode 100644
index 00000000..34025df6
--- /dev/null
+++ b/include/linux/configfs.h
@@ -0,0 +1,260 @@
+/* -*- mode: c; c-basic-offset: 8; -*-
+ * vim: noexpandtab sw=8 ts=8 sts=0:
+ *
+ * configfs.h - definitions for the device driver filesystem
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the
+ * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 021110-1307, USA.
+ *
+ * Based on sysfs:
+ * 	sysfs is Copyright (C) 2001, 2002, 2003 Patrick Mochel
+ *
+ * Based on kobject.h:
+ *      Copyright (c) 2002-2003	Patrick Mochel
+ *      Copyright (c) 2002-2003	Open Source Development Labs
+ *
+ * configfs Copyright (C) 2005 Oracle.  All rights reserved.
+ *
+ * Please read Documentation/filesystems/configfs/configfs.txt before using
+ * the configfs interface, ESPECIALLY the parts about reference counts and
+ * item destructors.
+ */
+
+#ifndef _CONFIGFS_H_
+#define _CONFIGFS_H_
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/kref.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+
+#include <linux/atomic.h>
+
+#define CONFIGFS_ITEM_NAME_LEN	20
+
+struct module;
+
+struct configfs_item_operations;
+struct configfs_group_operations;
+struct configfs_attribute;
+struct configfs_subsystem;
+
+struct config_item {
+	char			*ci_name;
+	char			ci_namebuf[CONFIGFS_ITEM_NAME_LEN];
+	struct kref		ci_kref;
+	struct list_head	ci_entry;
+	struct config_item	*ci_parent;
+	struct config_group	*ci_group;
+	struct config_item_type	*ci_type;
+	struct dentry		*ci_dentry;
+};
+
+extern int config_item_set_name(struct config_item *, const char *, ...);
+
+static inline char *config_item_name(struct config_item * item)
+{
+	return item->ci_name;
+}
+
+extern void config_item_init(struct config_item *);
+extern void config_item_init_type_name(struct config_item *item,
+				       const char *name,
+				       struct config_item_type *type);
+
+extern struct config_item * config_item_get(struct config_item *);
+extern void config_item_put(struct config_item *);
+
+struct config_item_type {
+	struct module				*ct_owner;
+	struct configfs_item_operations		*ct_item_ops;
+	struct configfs_group_operations	*ct_group_ops;
+	struct configfs_attribute		**ct_attrs;
+};
+
+/**
+ *	group - a group of config_items of a specific type, belonging
+ *	to a specific subsystem.
+ */
+struct config_group {
+	struct config_item		cg_item;
+	struct list_head		cg_children;
+	struct configfs_subsystem 	*cg_subsys;
+	struct config_group		**default_groups;
+};
+
+extern void config_group_init(struct config_group *group);
+extern void config_group_init_type_name(struct config_group *group,
+					const char *name,
+					struct config_item_type *type);
+
+static inline struct config_group *to_config_group(struct config_item *item)
+{
+	return item ? container_of(item,struct config_group,cg_item) : NULL;
+}
+
+static inline struct config_group *config_group_get(struct config_group *group)
+{
+	return group ? to_config_group(config_item_get(&group->cg_item)) : NULL;
+}
+
+static inline void config_group_put(struct config_group *group)
+{
+	config_item_put(&group->cg_item);
+}
+
+extern struct config_item *config_group_find_item(struct config_group *,
+						  const char *);
+
+
+struct configfs_attribute {
+	const char		*ca_name;
+	struct module 		*ca_owner;
+	umode_t			ca_mode;
+};
+
+/*
+ * Users often need to create attribute structures for their configurable
+ * attributes, containing a configfs_attribute member and function pointers
+ * for the show() and store() operations on that attribute. If they don't
+ * need anything else on the extended attribute structure, they can use
+ * this macro to define it  The argument _item is the name of the
+ * config_item structure.
+ */
+#define CONFIGFS_ATTR_STRUCT(_item)					\
+struct _item##_attribute {						\
+	struct configfs_attribute attr;					\
+	ssize_t (*show)(struct _item *, char *);			\
+	ssize_t (*store)(struct _item *, const char *, size_t);		\
+}
+
+/*
+ * With the extended attribute structure, users can use this macro
+ * (similar to sysfs' __ATTR) to make defining attributes easier.
+ * An example:
+ * #define MYITEM_ATTR(_name, _mode, _show, _store)	\
+ * struct myitem_attribute childless_attr_##_name =	\
+ *         __CONFIGFS_ATTR(_name, _mode, _show, _store)
+ */
+#define __CONFIGFS_ATTR(_name, _mode, _show, _store)			\
+{									\
+	.attr	= {							\
+			.ca_name = __stringify(_name),			\
+			.ca_mode = _mode,				\
+			.ca_owner = THIS_MODULE,			\
+	},								\
+	.show	= _show,						\
+	.store	= _store,						\
+}
+/* Here is a readonly version, only requiring a show() operation */
+#define __CONFIGFS_ATTR_RO(_name, _show)				\
+{									\
+	.attr	= {							\
+			.ca_name = __stringify(_name),			\
+			.ca_mode = 0444,				\
+			.ca_owner = THIS_MODULE,			\
+	},								\
+	.show	= _show,						\
+}
+
+/*
+ * With these extended attributes, the simple show_attribute() and
+ * store_attribute() operations need to call the show() and store() of the
+ * attributes.  This is a common pattern, so we provide a macro to define
+ * them.  The argument _item is the name of the config_item structure.
+ * This macro expects the attributes to be named "struct <name>_attribute"
+ * and the function to_<name>() to exist;
+ */
+#define CONFIGFS_ATTR_OPS(_item)					\
+static ssize_t _item##_attr_show(struct config_item *item,		\
+				 struct configfs_attribute *attr,	\
+				 char *page)				\
+{									\
+	struct _item *_item = to_##_item(item);				\
+	struct _item##_attribute *_item##_attr =			\
+		container_of(attr, struct _item##_attribute, attr);	\
+	ssize_t ret = 0;						\
+									\
+	if (_item##_attr->show)						\
+		ret = _item##_attr->show(_item, page);			\
+	return ret;							\
+}									\
+static ssize_t _item##_attr_store(struct config_item *item,		\
+				  struct configfs_attribute *attr,	\
+				  const char *page, size_t count)	\
+{									\
+	struct _item *_item = to_##_item(item);				\
+	struct _item##_attribute *_item##_attr =			\
+		container_of(attr, struct _item##_attribute, attr);	\
+	ssize_t ret = -EINVAL;						\
+									\
+	if (_item##_attr->store)					\
+		ret = _item##_attr->store(_item, page, count);		\
+	return ret;							\
+}
+
+/*
+ * If allow_link() exists, the item can symlink(2) out to other
+ * items.  If the item is a group, it may support mkdir(2).
+ * Groups supply one of make_group() and make_item().  If the
+ * group supports make_group(), one can create group children.  If it
+ * supports make_item(), one can create config_item children.  make_group()
+ * and make_item() return ERR_PTR() on errors.  If it has
+ * default_groups on group->default_groups, it has automatically created
+ * group children.  default_groups may coexist alongsize make_group() or
+ * make_item(), but if the group wishes to have only default_groups
+ * children (disallowing mkdir(2)), it need not provide either function.
+ * If the group has commit(), it supports pending and committed (active)
+ * items.
+ */
+struct configfs_item_operations {
+	void (*release)(struct config_item *);
+	ssize_t	(*show_attribute)(struct config_item *, struct configfs_attribute *,char *);
+	ssize_t	(*store_attribute)(struct config_item *,struct configfs_attribute *,const char *, size_t);
+	int (*allow_link)(struct config_item *src, struct config_item *target);
+	int (*drop_link)(struct config_item *src, struct config_item *target);
+};
+
+struct configfs_group_operations {
+	struct config_item *(*make_item)(struct config_group *group, const char *name);
+	struct config_group *(*make_group)(struct config_group *group, const char *name);
+	int (*commit_item)(struct config_item *item);
+	void (*disconnect_notify)(struct config_group *group, struct config_item *item);
+	void (*drop_item)(struct config_group *group, struct config_item *item);
+};
+
+struct configfs_subsystem {
+	struct config_group	su_group;
+	struct mutex		su_mutex;
+};
+
+static inline struct configfs_subsystem *to_configfs_subsystem(struct config_group *group)
+{
+	return group ?
+		container_of(group, struct configfs_subsystem, su_group) :
+		NULL;
+}
+
+int configfs_register_subsystem(struct configfs_subsystem *subsys);
+void configfs_unregister_subsystem(struct configfs_subsystem *subsys);
+
+/* These functions can sleep and can alloc with GFP_KERNEL */
+/* WARNING: These cannot be called underneath configfs callbacks!! */
+int configfs_depend_item(struct configfs_subsystem *subsys, struct config_item *target);
+void configfs_undepend_item(struct configfs_subsystem *subsys, struct config_item *target);
+
+#endif /* _CONFIGFS_H_ */
diff --git a/include/linux/connector.h b/include/linux/connector.h
new file mode 100644
index 00000000..76384074
--- /dev/null
+++ b/include/linux/connector.h
@@ -0,0 +1,141 @@
+/*
+ * 	connector.h
+ * 
+ * 2004-2005 Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
+ * All rights reserved.
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __CONNECTOR_H
+#define __CONNECTOR_H
+
+#include <linux/types.h>
+
+/*
+ * Process Events connector unique ids -- used for message routing
+ */
+#define CN_IDX_PROC			0x1
+#define CN_VAL_PROC			0x1
+#define CN_IDX_CIFS			0x2
+#define CN_VAL_CIFS                     0x1
+#define CN_W1_IDX			0x3	/* w1 communication */
+#define CN_W1_VAL			0x1
+#define CN_IDX_V86D			0x4
+#define CN_VAL_V86D_UVESAFB		0x1
+#define CN_IDX_BB			0x5	/* BlackBoard, from the TSP GPL sampling framework */
+#define CN_DST_IDX			0x6
+#define CN_DST_VAL			0x1
+#define CN_IDX_DM			0x7	/* Device Mapper */
+#define CN_VAL_DM_USERSPACE_LOG		0x1
+#define CN_IDX_DRBD			0x8
+#define CN_VAL_DRBD			0x1
+#define CN_KVP_IDX			0x9	/* HyperV KVP */
+#define CN_KVP_VAL			0x1	/* queries from the kernel */
+
+#define CN_NETLINK_USERS		10	/* Highest index + 1 */
+
+/*
+ * Maximum connector's message size.
+ */
+#define CONNECTOR_MAX_MSG_SIZE		16384
+
+/*
+ * idx and val are unique identifiers which 
+ * are used for message routing and 
+ * must be registered in connector.h for in-kernel usage.
+ */
+
+struct cb_id {
+	__u32 idx;
+	__u32 val;
+};
+
+struct cn_msg {
+	struct cb_id id;
+
+	__u32 seq;
+	__u32 ack;
+
+	__u16 len;		/* Length of the following data */
+	__u16 flags;
+	__u8 data[0];
+};
+
+#ifdef __KERNEL__
+
+#include <linux/atomic.h>
+
+#include <linux/list.h>
+#include <linux/workqueue.h>
+
+#include <net/sock.h>
+
+#define CN_CBQ_NAMELEN		32
+
+struct cn_queue_dev {
+	atomic_t refcnt;
+	unsigned char name[CN_CBQ_NAMELEN];
+
+	struct list_head queue_list;
+	spinlock_t queue_lock;
+
+	struct sock *nls;
+};
+
+struct cn_callback_id {
+	unsigned char name[CN_CBQ_NAMELEN];
+	struct cb_id id;
+};
+
+struct cn_callback_entry {
+	struct list_head callback_entry;
+	atomic_t refcnt;
+	struct cn_queue_dev *pdev;
+
+	struct cn_callback_id id;
+	void (*callback) (struct cn_msg *, struct netlink_skb_parms *);
+
+	u32 seq, group;
+};
+
+struct cn_dev {
+	struct cb_id id;
+
+	u32 seq, groups;
+	struct sock *nls;
+	void (*input) (struct sk_buff *skb);
+
+	struct cn_queue_dev *cbdev;
+};
+
+int cn_add_callback(struct cb_id *id, const char *name,
+		    void (*callback)(struct cn_msg *, struct netlink_skb_parms *));
+void cn_del_callback(struct cb_id *);
+int cn_netlink_send(struct cn_msg *, u32, gfp_t);
+
+int cn_queue_add_callback(struct cn_queue_dev *dev, const char *name,
+			  struct cb_id *id,
+			  void (*callback)(struct cn_msg *, struct netlink_skb_parms *));
+void cn_queue_del_callback(struct cn_queue_dev *dev, struct cb_id *id);
+void cn_queue_release_callback(struct cn_callback_entry *);
+
+struct cn_queue_dev *cn_queue_alloc_dev(const char *name, struct sock *);
+void cn_queue_free_dev(struct cn_queue_dev *dev);
+
+int cn_cb_equal(struct cb_id *, struct cb_id *);
+
+#endif				/* __KERNEL__ */
+#endif				/* __CONNECTOR_H */
diff --git a/include/linux/console.h b/include/linux/console.h
new file mode 100644
index 00000000..7201ce42
--- /dev/null
+++ b/include/linux/console.h
@@ -0,0 +1,184 @@
+/*
+ *  linux/include/linux/console.h
+ *
+ *  Copyright (C) 1993        Hamish Macdonald
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ *
+ * Changed:
+ * 10-Mar-94: Arno Griffioen: Conversion for vt100 emulator port from PC LINUX
+ */
+
+#ifndef _LINUX_CONSOLE_H_
+#define _LINUX_CONSOLE_H_ 1
+
+#include <linux/types.h>
+
+struct vc_data;
+struct console_font_op;
+struct console_font;
+struct module;
+struct tty_struct;
+
+/*
+ * this is what the terminal answers to a ESC-Z or csi0c query.
+ */
+#define VT100ID "\033[?1;2c"
+#define VT102ID "\033[?6c"
+
+struct consw {
+	struct module *owner;
+	const char *(*con_startup)(void);
+	void	(*con_init)(struct vc_data *, int);
+	void	(*con_deinit)(struct vc_data *);
+	void	(*con_clear)(struct vc_data *, int, int, int, int);
+	void	(*con_putc)(struct vc_data *, int, int, int);
+	void	(*con_putcs)(struct vc_data *, const unsigned short *, int, int, int);
+	void	(*con_cursor)(struct vc_data *, int);
+	int	(*con_scroll)(struct vc_data *, int, int, int, int);
+	void	(*con_bmove)(struct vc_data *, int, int, int, int, int, int);
+	int	(*con_switch)(struct vc_data *);
+	int	(*con_blank)(struct vc_data *, int, int);
+	int	(*con_font_set)(struct vc_data *, struct console_font *, unsigned);
+	int	(*con_font_get)(struct vc_data *, struct console_font *);
+	int	(*con_font_default)(struct vc_data *, struct console_font *, char *);
+	int	(*con_font_copy)(struct vc_data *, int);
+	int     (*con_resize)(struct vc_data *, unsigned int, unsigned int,
+			       unsigned int);
+	int	(*con_set_palette)(struct vc_data *, unsigned char *);
+	int	(*con_scrolldelta)(struct vc_data *, int);
+	int	(*con_set_origin)(struct vc_data *);
+	void	(*con_save_screen)(struct vc_data *);
+	u8	(*con_build_attr)(struct vc_data *, u8, u8, u8, u8, u8, u8);
+	void	(*con_invert_region)(struct vc_data *, u16 *, int);
+	u16    *(*con_screen_pos)(struct vc_data *, int);
+	unsigned long (*con_getxy)(struct vc_data *, unsigned long, int *, int *);
+	/*
+	 * Prepare the console for the debugger.  This includes, but is not
+	 * limited to, unblanking the console, loading an appropriate
+	 * palette, and allowing debugger generated output.
+	 */
+	int	(*con_debug_enter)(struct vc_data *);
+	/*
+	 * Restore the console to its pre-debug state as closely as possible.
+	 */
+	int	(*con_debug_leave)(struct vc_data *);
+};
+
+extern const struct consw *conswitchp;
+
+extern const struct consw dummy_con;	/* dummy console buffer */
+extern const struct consw vga_con;	/* VGA text console */
+extern const struct consw newport_con;	/* SGI Newport console  */
+extern const struct consw prom_con;	/* SPARC PROM console */
+
+int con_is_bound(const struct consw *csw);
+int register_con_driver(const struct consw *csw, int first, int last);
+int unregister_con_driver(const struct consw *csw);
+int take_over_console(const struct consw *sw, int first, int last, int deflt);
+void give_up_console(const struct consw *sw);
+#ifdef CONFIG_HW_CONSOLE
+int con_debug_enter(struct vc_data *vc);
+int con_debug_leave(void);
+#else
+#define con_debug_enter(vc) (0)
+#define con_debug_leave() (0)
+#endif
+
+/* scroll */
+#define SM_UP       (1)
+#define SM_DOWN     (2)
+
+/* cursor */
+#define CM_DRAW     (1)
+#define CM_ERASE    (2)
+#define CM_MOVE     (3)
+
+/*
+ * The interface for a console, or any other device that wants to capture
+ * console messages (printer driver?)
+ *
+ * If a console driver is marked CON_BOOT then it will be auto-unregistered
+ * when the first real console is registered.  This is for early-printk drivers.
+ */
+
+#define CON_PRINTBUFFER	(1)
+#define CON_CONSDEV	(2) /* Last on the command line */
+#define CON_ENABLED	(4)
+#define CON_BOOT	(8)
+#define CON_ANYTIME	(16) /* Safe to call when cpu is offline */
+#define CON_BRL		(32) /* Used for a braille device */
+
+struct console {
+	char	name[16];
+	void	(*write)(struct console *, const char *, unsigned);
+	int	(*read)(struct console *, char *, unsigned);
+	struct tty_driver *(*device)(struct console *, int *);
+	void	(*unblank)(void);
+	int	(*setup)(struct console *, char *);
+	int	(*early_setup)(void);
+	short	flags;
+	short	index;
+	int	cflag;
+	void	*data;
+	struct	 console *next;
+};
+
+/*
+ * for_each_console() allows you to iterate on each console
+ */
+#define for_each_console(con) \
+	for (con = console_drivers; con != NULL; con = con->next)
+
+extern int console_set_on_cmdline;
+
+extern int add_preferred_console(char *name, int idx, char *options);
+extern int update_console_cmdline(char *name, int idx, char *name_new, int idx_new, char *options);
+extern void register_console(struct console *);
+extern int unregister_console(struct console *);
+extern struct console *console_drivers;
+extern void console_lock(void);
+extern int console_trylock(void);
+extern void console_unlock(void);
+extern void console_conditional_schedule(void);
+extern void console_unblank(void);
+extern struct tty_driver *console_device(int *);
+extern void console_stop(struct console *);
+extern void console_start(struct console *);
+extern int is_console_locked(void);
+extern int braille_register_console(struct console *, int index,
+		char *console_options, char *braille_options);
+extern int braille_unregister_console(struct console *);
+extern void console_sysfs_notify(void);
+extern bool console_suspend_enabled;
+
+/* Suspend and resume console messages over PM events */
+extern void suspend_console(void);
+extern void resume_console(void);
+
+int mda_console_init(void);
+void prom_con_init(void);
+
+void vcs_make_sysfs(int index);
+void vcs_remove_sysfs(int index);
+
+/* Some debug stub to catch some of the obvious races in the VT code */
+#if 1
+#define WARN_CONSOLE_UNLOCKED()	WARN_ON(!is_console_locked() && !oops_in_progress)
+#else
+#define WARN_CONSOLE_UNLOCKED()
+#endif
+
+/* VESA Blanking Levels */
+#define VESA_NO_BLANKING        0
+#define VESA_VSYNC_SUSPEND      1
+#define VESA_HSYNC_SUSPEND      2
+#define VESA_POWERDOWN          3
+
+#ifdef CONFIG_VGA_CONSOLE
+extern bool vgacon_text_force(void);
+#endif
+
+#endif /* _LINUX_CONSOLE_H */
diff --git a/include/linux/console_struct.h b/include/linux/console_struct.h
new file mode 100644
index 00000000..7f0c3290
--- /dev/null
+++ b/include/linux/console_struct.h
@@ -0,0 +1,139 @@
+/*
+ * console_struct.h
+ *
+ * Data structure describing single virtual console except for data
+ * used by vt.c.
+ *
+ * Fields marked with [#] must be set by the low-level driver.
+ * Fields marked with [!] can be changed by the low-level driver
+ * to achieve effects such as fast scrolling by changing the origin.
+ */
+
+#ifndef _LINUX_CONSOLE_STRUCT_H
+#define _LINUX_CONSOLE_STRUCT_H
+
+#include <linux/wait.h>
+#include <linux/vt.h>
+#include <linux/workqueue.h>
+
+struct vt_struct;
+
+#define NPAR 16
+
+struct vc_data {
+	struct tty_port port;			/* Upper level data */
+
+	unsigned short	vc_num;			/* Console number */
+	unsigned int	vc_cols;		/* [#] Console size */
+	unsigned int	vc_rows;
+	unsigned int	vc_size_row;		/* Bytes per row */
+	unsigned int	vc_scan_lines;		/* # of scan lines */
+	unsigned long	vc_origin;		/* [!] Start of real screen */
+	unsigned long	vc_scr_end;		/* [!] End of real screen */
+	unsigned long	vc_visible_origin;	/* [!] Top of visible window */
+	unsigned int	vc_top, vc_bottom;	/* Scrolling region */
+	const struct consw *vc_sw;
+	unsigned short	*vc_screenbuf;		/* In-memory character/attribute buffer */
+	unsigned int	vc_screenbuf_size;
+	unsigned char	vc_mode;		/* KD_TEXT, ... */
+	/* attributes for all characters on screen */
+	unsigned char	vc_attr;		/* Current attributes */
+	unsigned char	vc_def_color;		/* Default colors */
+	unsigned char	vc_color;		/* Foreground & background */
+	unsigned char	vc_s_color;		/* Saved foreground & background */
+	unsigned char	vc_ulcolor;		/* Color for underline mode */
+	unsigned char   vc_itcolor;
+	unsigned char	vc_halfcolor;		/* Color for half intensity mode */
+	/* cursor */
+	unsigned int	vc_cursor_type;
+	unsigned short	vc_complement_mask;	/* [#] Xor mask for mouse pointer */
+	unsigned short	vc_s_complement_mask;	/* Saved mouse pointer mask */
+	unsigned int	vc_x, vc_y;		/* Cursor position */
+	unsigned int	vc_saved_x, vc_saved_y;
+	unsigned long	vc_pos;			/* Cursor address */
+	/* fonts */	
+	unsigned short	vc_hi_font_mask;	/* [#] Attribute set for upper 256 chars of font or 0 if not supported */
+	struct console_font vc_font;		/* Current VC font set */
+	unsigned short	vc_video_erase_char;	/* Background erase character */
+	/* VT terminal data */
+	unsigned int	vc_state;		/* Escape sequence parser state */
+	unsigned int	vc_npar,vc_par[NPAR];	/* Parameters of current escape sequence */
+	/* data for manual vt switching */
+	struct vt_mode	vt_mode;
+	struct pid 	*vt_pid;
+	int		vt_newvt;
+	wait_queue_head_t paste_wait;
+	/* mode flags */
+	unsigned int	vc_charset	: 1;	/* Character set G0 / G1 */
+	unsigned int	vc_s_charset	: 1;	/* Saved character set */
+	unsigned int	vc_disp_ctrl	: 1;	/* Display chars < 32? */
+	unsigned int	vc_toggle_meta	: 1;	/* Toggle high bit? */
+	unsigned int	vc_decscnm	: 1;	/* Screen Mode */
+	unsigned int	vc_decom	: 1;	/* Origin Mode */
+	unsigned int	vc_decawm	: 1;	/* Autowrap Mode */
+	unsigned int	vc_deccm	: 1;	/* Cursor Visible */
+	unsigned int	vc_decim	: 1;	/* Insert Mode */
+	unsigned int	vc_deccolm	: 1;	/* 80/132 Column Mode */
+	/* attribute flags */
+	unsigned int	vc_intensity	: 2;	/* 0=half-bright, 1=normal, 2=bold */
+	unsigned int    vc_italic:1;
+	unsigned int	vc_underline	: 1;
+	unsigned int	vc_blink	: 1;
+	unsigned int	vc_reverse	: 1;
+	unsigned int	vc_s_intensity	: 2;	/* saved rendition */
+	unsigned int    vc_s_italic:1;
+	unsigned int	vc_s_underline	: 1;
+	unsigned int	vc_s_blink	: 1;
+	unsigned int	vc_s_reverse	: 1;
+	/* misc */
+	unsigned int	vc_ques		: 1;
+	unsigned int	vc_need_wrap	: 1;
+	unsigned int	vc_can_do_color	: 1;
+	unsigned int	vc_report_mouse : 2;
+	unsigned char	vc_utf		: 1;	/* Unicode UTF-8 encoding */
+	unsigned char	vc_utf_count;
+		 int	vc_utf_char;
+	unsigned int	vc_tab_stop[8];		/* Tab stops. 256 columns. */
+	unsigned char   vc_palette[16*3];       /* Colour palette for VGA+ */
+	unsigned short * vc_translate;
+	unsigned char 	vc_G0_charset;
+	unsigned char 	vc_G1_charset;
+	unsigned char 	vc_saved_G0;
+	unsigned char 	vc_saved_G1;
+	unsigned int    vc_resize_user;         /* resize request from user */
+	unsigned int	vc_bell_pitch;		/* Console bell pitch */
+	unsigned int	vc_bell_duration;	/* Console bell duration */
+	struct vc_data **vc_display_fg;		/* [!] Ptr to var holding fg console for this display */
+	unsigned long	vc_uni_pagedir;
+	unsigned long	*vc_uni_pagedir_loc;  /* [!] Location of uni_pagedir variable for this console */
+	bool vc_panic_force_write; /* when oops/panic this VC can accept forced output/blanking */
+	/* additional information is in vt_kern.h */
+};
+
+struct vc {
+	struct vc_data *d;
+	struct work_struct SAK_work;
+
+	/* might add  scrmem, vt_struct, kbd  at some time,
+	   to have everything in one place - the disadvantage
+	   would be that vc_cons etc can no longer be static */
+};
+
+extern struct vc vc_cons [MAX_NR_CONSOLES];
+extern void vc_SAK(struct work_struct *work);
+
+#define CUR_DEF		0
+#define CUR_NONE	1
+#define CUR_UNDERLINE	2
+#define CUR_LOWER_THIRD	3
+#define CUR_LOWER_HALF	4
+#define CUR_TWO_THIRDS	5
+#define CUR_BLOCK	6
+#define CUR_HWMASK	0x0f
+#define CUR_SWMASK	0xfff0
+
+#define CUR_DEFAULT CUR_UNDERLINE
+
+#define CON_IS_VISIBLE(conp) (*conp->vc_display_fg == conp)
+
+#endif /* _LINUX_CONSOLE_STRUCT_H */
diff --git a/include/linux/consolemap.h b/include/linux/consolemap.h
new file mode 100644
index 00000000..c4811da1
--- /dev/null
+++ b/include/linux/consolemap.h
@@ -0,0 +1,34 @@
+/*
+ * consolemap.h
+ *
+ * Interface between console.c, selection.c  and consolemap.c
+ */
+#ifndef __LINUX_CONSOLEMAP_H__
+#define __LINUX_CONSOLEMAP_H__
+
+#define LAT1_MAP 0
+#define GRAF_MAP 1
+#define IBMPC_MAP 2
+#define USER_MAP 3
+
+#include <linux/types.h>
+
+#ifdef CONFIG_CONSOLE_TRANSLATIONS
+struct vc_data;
+
+extern u16 inverse_translate(struct vc_data *conp, int glyph, int use_unicode);
+extern unsigned short *set_translate(int m, struct vc_data *vc);
+extern int conv_uni_to_pc(struct vc_data *conp, long ucs);
+extern u32 conv_8bit_to_uni(unsigned char c);
+extern int conv_uni_to_8bit(u32 uni);
+void console_map_init(void);
+#else
+#define inverse_translate(conp, glyph, uni) ((uint16_t)glyph)
+#define set_translate(m, vc) ((unsigned short *)NULL)
+#define conv_uni_to_pc(conp, ucs) ((int) (ucs > 0xff ? -1: ucs))
+#define conv_8bit_to_uni(c) ((uint32_t)(c))
+#define conv_uni_to_8bit(c) ((int) ((c) & 0xff))
+#define console_map_init(c) do { ; } while (0)
+#endif /* CONFIG_CONSOLE_TRANSLATIONS */
+
+#endif /* __LINUX_CONSOLEMAP_H__ */
diff --git a/include/linux/const.h b/include/linux/const.h
new file mode 100644
index 00000000..c22c707c
--- /dev/null
+++ b/include/linux/const.h
@@ -0,0 +1,24 @@
+/* const.h: Macros for dealing with constants.  */
+
+#ifndef _LINUX_CONST_H
+#define _LINUX_CONST_H
+
+/* Some constant macros are used in both assembler and
+ * C code.  Therefore we cannot annotate them always with
+ * 'UL' and other type specifiers unilaterally.  We
+ * use the following macros to deal with this.
+ *
+ * Similarly, _AT() will cast an expression with a type in C, but
+ * leave it unchanged in asm.
+ */
+
+#ifdef __ASSEMBLY__
+#define _AC(X,Y)	X
+#define _AT(T,X)	X
+#else
+#define __AC(X,Y)	(X##Y)
+#define _AC(X,Y)	__AC(X,Y)
+#define _AT(T,X)	((T)(X))
+#endif
+
+#endif /* !(_LINUX_CONST_H) */
diff --git a/include/linux/cordic.h b/include/linux/cordic.h
new file mode 100644
index 00000000..cf68ca4a
--- /dev/null
+++ b/include/linux/cordic.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2011 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#ifndef __CORDIC_H_
+#define __CORDIC_H_
+
+#include <linux/types.h>
+
+/**
+ * struct cordic_iq - i/q coordinate.
+ *
+ * @i: real part of coordinate (in phase).
+ * @q: imaginary part of coordinate (quadrature).
+ */
+struct cordic_iq {
+	s32 i;
+	s32 q;
+};
+
+/**
+ * cordic_calc_iq() - calculates the i/q coordinate for given angle.
+ *
+ * @theta: angle in degrees for which i/q coordinate is to be calculated.
+ * @coord: function output parameter holding the i/q coordinate.
+ *
+ * The function calculates the i/q coordinate for a given angle using the
+ * CORDIC algorithm. The coordinate consists of a real (i) and an
+ * imaginary (q) part. The real part is essentially the cosine of the
+ * angle and the imaginary part is the sine of the angle. The returned
+ * values are scaled by 2^16 for precision. The range for theta is
+ * for -180 degrees to +180 degrees. Passed values outside this range are
+ * converted before doing the actual calculation.
+ */
+struct cordic_iq cordic_calc_iq(s32 theta);
+
+#endif /* __CORDIC_H_ */
diff --git a/include/linux/coredump.h b/include/linux/coredump.h
new file mode 100644
index 00000000..ba4b85a6
--- /dev/null
+++ b/include/linux/coredump.h
@@ -0,0 +1,15 @@
+#ifndef _LINUX_COREDUMP_H
+#define _LINUX_COREDUMP_H
+
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/fs.h>
+
+/*
+ * These are the only things you should do on a core-file: use only these
+ * functions to write out all the necessary info.
+ */
+extern int dump_write(struct file *file, const void *addr, int nr);
+extern int dump_seek(struct file *file, loff_t off);
+
+#endif /* _LINUX_COREDUMP_H */
diff --git a/include/linux/cper.h b/include/linux/cper.h
new file mode 100644
index 00000000..c2304949
--- /dev/null
+++ b/include/linux/cper.h
@@ -0,0 +1,394 @@
+/*
+ * UEFI Common Platform Error Record
+ *
+ * Copyright (C) 2010, Intel Corp.
+ *	Author: Huang Ying <ying.huang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef LINUX_CPER_H
+#define LINUX_CPER_H
+
+#include <linux/uuid.h>
+
+/* CPER record signature and the size */
+#define CPER_SIG_RECORD				"CPER"
+#define CPER_SIG_SIZE				4
+/* Used in signature_end field in struct cper_record_header */
+#define CPER_SIG_END				0xffffffff
+
+/*
+ * CPER record header revision, used in revision field in struct
+ * cper_record_header
+ */
+#define CPER_RECORD_REV				0x0100
+
+/*
+ * Severity difinition for error_severity in struct cper_record_header
+ * and section_severity in struct cper_section_descriptor
+ */
+enum {
+	CPER_SEV_RECOVERABLE,
+	CPER_SEV_FATAL,
+	CPER_SEV_CORRECTED,
+	CPER_SEV_INFORMATIONAL,
+};
+
+/*
+ * Validation bits difinition for validation_bits in struct
+ * cper_record_header. If set, corresponding fields in struct
+ * cper_record_header contain valid information.
+ *
+ * corresponds platform_id
+ */
+#define CPER_VALID_PLATFORM_ID			0x0001
+/* corresponds timestamp */
+#define CPER_VALID_TIMESTAMP			0x0002
+/* corresponds partition_id */
+#define CPER_VALID_PARTITION_ID			0x0004
+
+/*
+ * Notification type used to generate error record, used in
+ * notification_type in struct cper_record_header
+ *
+ * Corrected Machine Check
+ */
+#define CPER_NOTIFY_CMC							\
+	UUID_LE(0x2DCE8BB1, 0xBDD7, 0x450e, 0xB9, 0xAD, 0x9C, 0xF4,	\
+		0xEB, 0xD4, 0xF8, 0x90)
+/* Corrected Platform Error */
+#define CPER_NOTIFY_CPE							\
+	UUID_LE(0x4E292F96, 0xD843, 0x4a55, 0xA8, 0xC2, 0xD4, 0x81,	\
+		0xF2, 0x7E, 0xBE, 0xEE)
+/* Machine Check Exception */
+#define CPER_NOTIFY_MCE							\
+	UUID_LE(0xE8F56FFE, 0x919C, 0x4cc5, 0xBA, 0x88, 0x65, 0xAB,	\
+		0xE1, 0x49, 0x13, 0xBB)
+/* PCI Express Error */
+#define CPER_NOTIFY_PCIE						\
+	UUID_LE(0xCF93C01F, 0x1A16, 0x4dfc, 0xB8, 0xBC, 0x9C, 0x4D,	\
+		0xAF, 0x67, 0xC1, 0x04)
+/* INIT Record (for IPF) */
+#define CPER_NOTIFY_INIT						\
+	UUID_LE(0xCC5263E8, 0x9308, 0x454a, 0x89, 0xD0, 0x34, 0x0B,	\
+		0xD3, 0x9B, 0xC9, 0x8E)
+/* Non-Maskable Interrupt */
+#define CPER_NOTIFY_NMI							\
+	UUID_LE(0x5BAD89FF, 0xB7E6, 0x42c9, 0x81, 0x4A, 0xCF, 0x24,	\
+		0x85, 0xD6, 0xE9, 0x8A)
+/* BOOT Error Record */
+#define CPER_NOTIFY_BOOT						\
+	UUID_LE(0x3D61A466, 0xAB40, 0x409a, 0xA6, 0x98, 0xF3, 0x62,	\
+		0xD4, 0x64, 0xB3, 0x8F)
+/* DMA Remapping Error */
+#define CPER_NOTIFY_DMAR						\
+	UUID_LE(0x667DD791, 0xC6B3, 0x4c27, 0x8A, 0x6B, 0x0F, 0x8E,	\
+		0x72, 0x2D, 0xEB, 0x41)
+
+/*
+ * Flags bits definitions for flags in struct cper_record_header
+ * If set, the error has been recovered
+ */
+#define CPER_HW_ERROR_FLAGS_RECOVERED		0x1
+/* If set, the error is for previous boot */
+#define CPER_HW_ERROR_FLAGS_PREVERR		0x2
+/* If set, the error is injected for testing */
+#define CPER_HW_ERROR_FLAGS_SIMULATED		0x4
+
+/*
+ * CPER section header revision, used in revision field in struct
+ * cper_section_descriptor
+ */
+#define CPER_SEC_REV				0x0100
+
+/*
+ * Validation bits difinition for validation_bits in struct
+ * cper_section_descriptor. If set, corresponding fields in struct
+ * cper_section_descriptor contain valid information.
+ *
+ * corresponds fru_id
+ */
+#define CPER_SEC_VALID_FRU_ID			0x1
+/* corresponds fru_text */
+#define CPER_SEC_VALID_FRU_TEXT			0x2
+
+/*
+ * Flags bits definitions for flags in struct cper_section_descriptor
+ *
+ * If set, the section is associated with the error condition
+ * directly, and should be focused on
+ */
+#define CPER_SEC_PRIMARY			0x0001
+/*
+ * If set, the error was not contained within the processor or memory
+ * hierarchy and the error may have propagated to persistent storage
+ * or network
+ */
+#define CPER_SEC_CONTAINMENT_WARNING		0x0002
+/* If set, the component must be re-initialized or re-enabled prior to use */
+#define CPER_SEC_RESET				0x0004
+/* If set, Linux may choose to discontinue use of the resource */
+#define CPER_SEC_ERROR_THRESHOLD_EXCEEDED	0x0008
+/*
+ * If set, resource could not be queried for error information due to
+ * conflicts with other system software or resources. Some fields of
+ * the section will be invalid
+ */
+#define CPER_SEC_RESOURCE_NOT_ACCESSIBLE	0x0010
+/*
+ * If set, action has been taken to ensure error containment (such as
+ * poisoning data), but the error has not been fully corrected and the
+ * data has not been consumed. Linux may choose to take further
+ * corrective action before the data is consumed
+ */
+#define CPER_SEC_LATENT_ERROR			0x0020
+
+/*
+ * Section type definitions, used in section_type field in struct
+ * cper_section_descriptor
+ *
+ * Processor Generic
+ */
+#define CPER_SEC_PROC_GENERIC						\
+	UUID_LE(0x9876CCAD, 0x47B4, 0x4bdb, 0xB6, 0x5E, 0x16, 0xF1,	\
+		0x93, 0xC4, 0xF3, 0xDB)
+/* Processor Specific: X86/X86_64 */
+#define CPER_SEC_PROC_IA						\
+	UUID_LE(0xDC3EA0B0, 0xA144, 0x4797, 0xB9, 0x5B, 0x53, 0xFA,	\
+		0x24, 0x2B, 0x6E, 0x1D)
+/* Processor Specific: IA64 */
+#define CPER_SEC_PROC_IPF						\
+	UUID_LE(0xE429FAF1, 0x3CB7, 0x11D4, 0x0B, 0xCA, 0x07, 0x00,	\
+		0x80, 0xC7, 0x3C, 0x88, 0x81)
+/* Platform Memory */
+#define CPER_SEC_PLATFORM_MEM						\
+	UUID_LE(0xA5BC1114, 0x6F64, 0x4EDE, 0xB8, 0x63, 0x3E, 0x83,	\
+		0xED, 0x7C, 0x83, 0xB1)
+#define CPER_SEC_PCIE							\
+	UUID_LE(0xD995E954, 0xBBC1, 0x430F, 0xAD, 0x91, 0xB4, 0x4D,	\
+		0xCB, 0x3C, 0x6F, 0x35)
+/* Firmware Error Record Reference */
+#define CPER_SEC_FW_ERR_REC_REF						\
+	UUID_LE(0x81212A96, 0x09ED, 0x4996, 0x94, 0x71, 0x8D, 0x72,	\
+		0x9C, 0x8E, 0x69, 0xED)
+/* PCI/PCI-X Bus */
+#define CPER_SEC_PCI_X_BUS						\
+	UUID_LE(0xC5753963, 0x3B84, 0x4095, 0xBF, 0x78, 0xED, 0xDA,	\
+		0xD3, 0xF9, 0xC9, 0xDD)
+/* PCI Component/Device */
+#define CPER_SEC_PCI_DEV						\
+	UUID_LE(0xEB5E4685, 0xCA66, 0x4769, 0xB6, 0xA2, 0x26, 0x06,	\
+		0x8B, 0x00, 0x13, 0x26)
+#define CPER_SEC_DMAR_GENERIC						\
+	UUID_LE(0x5B51FEF7, 0xC79D, 0x4434, 0x8F, 0x1B, 0xAA, 0x62,	\
+		0xDE, 0x3E, 0x2C, 0x64)
+/* Intel VT for Directed I/O specific DMAr */
+#define CPER_SEC_DMAR_VT						\
+	UUID_LE(0x71761D37, 0x32B2, 0x45cd, 0xA7, 0xD0, 0xB0, 0xFE,	\
+		0xDD, 0x93, 0xE8, 0xCF)
+/* IOMMU specific DMAr */
+#define CPER_SEC_DMAR_IOMMU						\
+	UUID_LE(0x036F84E1, 0x7F37, 0x428c, 0xA7, 0x9E, 0x57, 0x5F,	\
+		0xDF, 0xAA, 0x84, 0xEC)
+
+#define CPER_PROC_VALID_TYPE			0x0001
+#define CPER_PROC_VALID_ISA			0x0002
+#define CPER_PROC_VALID_ERROR_TYPE		0x0004
+#define CPER_PROC_VALID_OPERATION		0x0008
+#define CPER_PROC_VALID_FLAGS			0x0010
+#define CPER_PROC_VALID_LEVEL			0x0020
+#define CPER_PROC_VALID_VERSION			0x0040
+#define CPER_PROC_VALID_BRAND_INFO		0x0080
+#define CPER_PROC_VALID_ID			0x0100
+#define CPER_PROC_VALID_TARGET_ADDRESS		0x0200
+#define CPER_PROC_VALID_REQUESTOR_ID		0x0400
+#define CPER_PROC_VALID_RESPONDER_ID		0x0800
+#define CPER_PROC_VALID_IP			0x1000
+
+#define CPER_MEM_VALID_ERROR_STATUS		0x0001
+#define CPER_MEM_VALID_PHYSICAL_ADDRESS		0x0002
+#define CPER_MEM_VALID_PHYSICAL_ADDRESS_MASK	0x0004
+#define CPER_MEM_VALID_NODE			0x0008
+#define CPER_MEM_VALID_CARD			0x0010
+#define CPER_MEM_VALID_MODULE			0x0020
+#define CPER_MEM_VALID_BANK			0x0040
+#define CPER_MEM_VALID_DEVICE			0x0080
+#define CPER_MEM_VALID_ROW			0x0100
+#define CPER_MEM_VALID_COLUMN			0x0200
+#define CPER_MEM_VALID_BIT_POSITION		0x0400
+#define CPER_MEM_VALID_REQUESTOR_ID		0x0800
+#define CPER_MEM_VALID_RESPONDER_ID		0x1000
+#define CPER_MEM_VALID_TARGET_ID		0x2000
+#define CPER_MEM_VALID_ERROR_TYPE		0x4000
+
+#define CPER_PCIE_VALID_PORT_TYPE		0x0001
+#define CPER_PCIE_VALID_VERSION			0x0002
+#define CPER_PCIE_VALID_COMMAND_STATUS		0x0004
+#define CPER_PCIE_VALID_DEVICE_ID		0x0008
+#define CPER_PCIE_VALID_SERIAL_NUMBER		0x0010
+#define CPER_PCIE_VALID_BRIDGE_CONTROL_STATUS	0x0020
+#define CPER_PCIE_VALID_CAPABILITY		0x0040
+#define CPER_PCIE_VALID_AER_INFO		0x0080
+
+#define CPER_PCIE_SLOT_SHIFT			3
+
+/*
+ * All tables and structs must be byte-packed to match CPER
+ * specification, since the tables are provided by the system BIOS
+ */
+#pragma pack(1)
+
+struct cper_record_header {
+	char	signature[CPER_SIG_SIZE];	/* must be CPER_SIG_RECORD */
+	__u16	revision;			/* must be CPER_RECORD_REV */
+	__u32	signature_end;			/* must be CPER_SIG_END */
+	__u16	section_count;
+	__u32	error_severity;
+	__u32	validation_bits;
+	__u32	record_length;
+	__u64	timestamp;
+	uuid_le	platform_id;
+	uuid_le	partition_id;
+	uuid_le	creator_id;
+	uuid_le	notification_type;
+	__u64	record_id;
+	__u32	flags;
+	__u64	persistence_information;
+	__u8	reserved[12];			/* must be zero */
+};
+
+struct cper_section_descriptor {
+	__u32	section_offset;		/* Offset in bytes of the
+					 *  section body from the base
+					 *  of the record header */
+	__u32	section_length;
+	__u16	revision;		/* must be CPER_RECORD_REV */
+	__u8	validation_bits;
+	__u8	reserved;		/* must be zero */
+	__u32	flags;
+	uuid_le	section_type;
+	uuid_le	fru_id;
+	__u32	section_severity;
+	__u8	fru_text[20];
+};
+
+/* Generic Processor Error Section */
+struct cper_sec_proc_generic {
+	__u64	validation_bits;
+	__u8	proc_type;
+	__u8	proc_isa;
+	__u8	proc_error_type;
+	__u8	operation;
+	__u8	flags;
+	__u8	level;
+	__u16	reserved;
+	__u64	cpu_version;
+	char	cpu_brand[128];
+	__u64	proc_id;
+	__u64	target_addr;
+	__u64	requestor_id;
+	__u64	responder_id;
+	__u64	ip;
+};
+
+/* IA32/X64 Processor Error Section */
+struct cper_sec_proc_ia {
+	__u64	validation_bits;
+	__u8	lapic_id;
+	__u8	cpuid[48];
+};
+
+/* IA32/X64 Processor Error Information Structure */
+struct cper_ia_err_info {
+	uuid_le	err_type;
+	__u64	validation_bits;
+	__u64	check_info;
+	__u64	target_id;
+	__u64	requestor_id;
+	__u64	responder_id;
+	__u64	ip;
+};
+
+/* IA32/X64 Processor Context Information Structure */
+struct cper_ia_proc_ctx {
+	__u16	reg_ctx_type;
+	__u16	reg_arr_size;
+	__u32	msr_addr;
+	__u64	mm_reg_addr;
+};
+
+/* Memory Error Section */
+struct cper_sec_mem_err {
+	__u64	validation_bits;
+	__u64	error_status;
+	__u64	physical_addr;
+	__u64	physical_addr_mask;
+	__u16	node;
+	__u16	card;
+	__u16	module;
+	__u16	bank;
+	__u16	device;
+	__u16	row;
+	__u16	column;
+	__u16	bit_pos;
+	__u64	requestor_id;
+	__u64	responder_id;
+	__u64	target_id;
+	__u8	error_type;
+};
+
+struct cper_sec_pcie {
+	__u64		validation_bits;
+	__u32		port_type;
+	struct {
+		__u8	minor;
+		__u8	major;
+		__u8	reserved[2];
+	}		version;
+	__u16		command;
+	__u16		status;
+	__u32		reserved;
+	struct {
+		__u16	vendor_id;
+		__u16	device_id;
+		__u8	class_code[3];
+		__u8	function;
+		__u8	device;
+		__u16	segment;
+		__u8	bus;
+		__u8	secondary_bus;
+		__u16	slot;
+		__u8	reserved;
+	}		device_id;
+	struct {
+		__u32	lower;
+		__u32	upper;
+	}		serial_number;
+	struct {
+		__u16	secondary_status;
+		__u16	control;
+	}		bridge;
+	__u8	capability[60];
+	__u8	aer_info[96];
+};
+
+/* Reset to default packing */
+#pragma pack()
+
+u64 cper_next_record_id(void);
+void cper_print_bits(const char *prefix, unsigned int bits,
+		     const char *strs[], unsigned int strs_size);
+
+#endif
diff --git a/include/linux/cpu.h b/include/linux/cpu.h
new file mode 100644
index 00000000..11dd01b8
--- /dev/null
+++ b/include/linux/cpu.h
@@ -0,0 +1,222 @@
+/*
+ * include/linux/cpu.h - generic cpu definition
+ *
+ * This is mainly for topological representation. We define the 
+ * basic 'struct cpu' here, which can be embedded in per-arch 
+ * definitions of processors.
+ *
+ * Basic handling of the devices is done in drivers/base/cpu.c
+ * and system devices are handled in drivers/base/sys.c. 
+ *
+ * CPUs are exported via sysfs in the class/cpu/devices/
+ * directory. 
+ */
+#ifndef _LINUX_CPU_H_
+#define _LINUX_CPU_H_
+
+#include <linux/node.h>
+#include <linux/compiler.h>
+#include <linux/cpumask.h>
+
+struct device;
+
+struct cpu {
+	int node_id;		/* The node which contains the CPU */
+	int hotpluggable;	/* creates sysfs control file if hotpluggable */
+	struct device dev;
+};
+
+extern int register_cpu(struct cpu *cpu, int num);
+extern struct device *get_cpu_device(unsigned cpu);
+extern bool cpu_is_hotpluggable(unsigned cpu);
+
+extern int cpu_add_dev_attr(struct device_attribute *attr);
+extern void cpu_remove_dev_attr(struct device_attribute *attr);
+
+extern int cpu_add_dev_attr_group(struct attribute_group *attrs);
+extern void cpu_remove_dev_attr_group(struct attribute_group *attrs);
+
+extern int sched_create_sysfs_power_savings_entries(struct device *dev);
+
+#ifdef CONFIG_HOTPLUG_CPU
+extern void unregister_cpu(struct cpu *cpu);
+extern ssize_t arch_cpu_probe(const char *, size_t);
+extern ssize_t arch_cpu_release(const char *, size_t);
+#endif
+struct notifier_block;
+
+#ifdef CONFIG_ARCH_HAS_CPU_AUTOPROBE
+extern int arch_cpu_uevent(struct device *dev, struct kobj_uevent_env *env);
+extern ssize_t arch_print_cpu_modalias(struct device *dev,
+				       struct device_attribute *attr,
+				       char *bufptr);
+#endif
+
+/*
+ * CPU notifier priorities.
+ */
+enum {
+	/*
+	 * SCHED_ACTIVE marks a cpu which is coming up active during
+	 * CPU_ONLINE and CPU_DOWN_FAILED and must be the first
+	 * notifier.  CPUSET_ACTIVE adjusts cpuset according to
+	 * cpu_active mask right after SCHED_ACTIVE.  During
+	 * CPU_DOWN_PREPARE, SCHED_INACTIVE and CPUSET_INACTIVE are
+	 * ordered in the similar way.
+	 *
+	 * This ordering guarantees consistent cpu_active mask and
+	 * migration behavior to all cpu notifiers.
+	 */
+	CPU_PRI_SCHED_ACTIVE	= INT_MAX,
+	CPU_PRI_CPUSET_ACTIVE	= INT_MAX - 1,
+	CPU_PRI_SCHED_INACTIVE	= INT_MIN + 1,
+	CPU_PRI_CPUSET_INACTIVE	= INT_MIN,
+
+	/* migration should happen before other stuff but after perf */
+	CPU_PRI_PERF		= 20,
+	CPU_PRI_MIGRATION	= 10,
+	/* prepare workqueues for other notifiers */
+	CPU_PRI_WORKQUEUE	= 5,
+};
+
+#define CPU_ONLINE		0x0002 /* CPU (unsigned)v is up */
+#define CPU_UP_PREPARE		0x0003 /* CPU (unsigned)v coming up */
+#define CPU_UP_CANCELED		0x0004 /* CPU (unsigned)v NOT coming up */
+#define CPU_DOWN_PREPARE	0x0005 /* CPU (unsigned)v going down */
+#define CPU_DOWN_FAILED		0x0006 /* CPU (unsigned)v NOT going down */
+#define CPU_DEAD		0x0007 /* CPU (unsigned)v dead */
+#define CPU_DYING		0x0008 /* CPU (unsigned)v not running any task,
+					* not handling interrupts, soon dead.
+					* Called on the dying cpu, interrupts
+					* are already disabled. Must not
+					* sleep, must not fail */
+#define CPU_POST_DEAD		0x0009 /* CPU (unsigned)v dead, cpu_hotplug
+					* lock is dropped */
+#define CPU_STARTING		0x000A /* CPU (unsigned)v soon running.
+					* Called on the new cpu, just before
+					* enabling interrupts. Must not sleep,
+					* must not fail */
+
+/* Used for CPU hotplug events occurring while tasks are frozen due to a suspend
+ * operation in progress
+ */
+#define CPU_TASKS_FROZEN	0x0010
+
+#define CPU_ONLINE_FROZEN	(CPU_ONLINE | CPU_TASKS_FROZEN)
+#define CPU_UP_PREPARE_FROZEN	(CPU_UP_PREPARE | CPU_TASKS_FROZEN)
+#define CPU_UP_CANCELED_FROZEN	(CPU_UP_CANCELED | CPU_TASKS_FROZEN)
+#define CPU_DOWN_PREPARE_FROZEN	(CPU_DOWN_PREPARE | CPU_TASKS_FROZEN)
+#define CPU_DOWN_FAILED_FROZEN	(CPU_DOWN_FAILED | CPU_TASKS_FROZEN)
+#define CPU_DEAD_FROZEN		(CPU_DEAD | CPU_TASKS_FROZEN)
+#define CPU_DYING_FROZEN	(CPU_DYING | CPU_TASKS_FROZEN)
+#define CPU_STARTING_FROZEN	(CPU_STARTING | CPU_TASKS_FROZEN)
+
+
+#ifdef CONFIG_SMP
+/* Need to know about CPUs going up/down? */
+#if defined(CONFIG_HOTPLUG_CPU) || !defined(MODULE)
+#define cpu_notifier(fn, pri) {					\
+	static struct notifier_block fn##_nb __cpuinitdata =	\
+		{ .notifier_call = fn, .priority = pri };	\
+	register_cpu_notifier(&fn##_nb);			\
+}
+#else /* #if defined(CONFIG_HOTPLUG_CPU) || !defined(MODULE) */
+#define cpu_notifier(fn, pri)	do { (void)(fn); } while (0)
+#endif /* #else #if defined(CONFIG_HOTPLUG_CPU) || !defined(MODULE) */
+#ifdef CONFIG_HOTPLUG_CPU
+extern int register_cpu_notifier(struct notifier_block *nb);
+extern void unregister_cpu_notifier(struct notifier_block *nb);
+#else
+
+#ifndef MODULE
+extern int register_cpu_notifier(struct notifier_block *nb);
+#else
+static inline int register_cpu_notifier(struct notifier_block *nb)
+{
+	return 0;
+}
+#endif
+
+static inline void unregister_cpu_notifier(struct notifier_block *nb)
+{
+}
+#endif
+
+int cpu_up(unsigned int cpu);
+void notify_cpu_starting(unsigned int cpu);
+extern void cpu_maps_update_begin(void);
+extern void cpu_maps_update_done(void);
+
+#else	/* CONFIG_SMP */
+
+#define cpu_notifier(fn, pri)	do { (void)(fn); } while (0)
+
+static inline int register_cpu_notifier(struct notifier_block *nb)
+{
+	return 0;
+}
+
+static inline void unregister_cpu_notifier(struct notifier_block *nb)
+{
+}
+
+static inline void cpu_maps_update_begin(void)
+{
+}
+
+static inline void cpu_maps_update_done(void)
+{
+}
+
+#endif /* CONFIG_SMP */
+extern struct bus_type cpu_subsys;
+
+#ifdef CONFIG_HOTPLUG_CPU
+/* Stop CPUs going up and down. */
+
+extern void get_online_cpus(void);
+extern void put_online_cpus(void);
+#define hotcpu_notifier(fn, pri)	cpu_notifier(fn, pri)
+#define register_hotcpu_notifier(nb)	register_cpu_notifier(nb)
+#define unregister_hotcpu_notifier(nb)	unregister_cpu_notifier(nb)
+int cpu_down(unsigned int cpu);
+
+#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
+extern void cpu_hotplug_driver_lock(void);
+extern void cpu_hotplug_driver_unlock(void);
+#else
+static inline void cpu_hotplug_driver_lock(void)
+{
+}
+
+static inline void cpu_hotplug_driver_unlock(void)
+{
+}
+#endif
+
+#else		/* CONFIG_HOTPLUG_CPU */
+
+#define get_online_cpus()	do { } while (0)
+#define put_online_cpus()	do { } while (0)
+#define hotcpu_notifier(fn, pri)	do { (void)(fn); } while (0)
+/* These aren't inline functions due to a GCC bug. */
+#define register_hotcpu_notifier(nb)	({ (void)(nb); 0; })
+#define unregister_hotcpu_notifier(nb)	({ (void)(nb); })
+#endif		/* CONFIG_HOTPLUG_CPU */
+
+#ifdef CONFIG_PM_SLEEP_SMP
+extern int disable_nonboot_cpus(void);
+extern void enable_nonboot_cpus(void);
+#else /* !CONFIG_PM_SLEEP_SMP */
+static inline int disable_nonboot_cpus(void) { return 0; }
+static inline void enable_nonboot_cpus(void) {}
+#endif /* !CONFIG_PM_SLEEP_SMP */
+
+#define IDLE_START 1
+#define IDLE_END 2
+
+void idle_notifier_register(struct notifier_block *n);
+void idle_notifier_unregister(struct notifier_block *n);
+void idle_notifier_call_chain(unsigned long val);
+
+#endif /* _LINUX_CPU_H_ */
diff --git a/include/linux/cpu_pm.h b/include/linux/cpu_pm.h
new file mode 100644
index 00000000..455b233d
--- /dev/null
+++ b/include/linux/cpu_pm.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _LINUX_CPU_PM_H
+#define _LINUX_CPU_PM_H
+
+#include <linux/kernel.h>
+#include <linux/notifier.h>
+
+/*
+ * When a CPU goes to a low power state that turns off power to the CPU's
+ * power domain, the contents of some blocks (floating point coprocessors,
+ * interrupt controllers, caches, timers) in the same power domain can
+ * be lost.  The cpm_pm notifiers provide a method for platform idle, suspend,
+ * and hotplug implementations to notify the drivers for these blocks that
+ * they may be reset.
+ *
+ * All cpu_pm notifications must be called with interrupts disabled.
+ *
+ * The notifications are split into two classes: CPU notifications and CPU
+ * cluster notifications.
+ *
+ * CPU notifications apply to a single CPU and must be called on the affected
+ * CPU.  They are used to save per-cpu context for affected blocks.
+ *
+ * CPU cluster notifications apply to all CPUs in a single power domain. They
+ * are used to save any global context for affected blocks, and must be called
+ * after all the CPUs in the power domain have been notified of the low power
+ * state.
+ */
+
+/*
+ * Event codes passed as unsigned long val to notifier calls
+ */
+enum cpu_pm_event {
+	/* A single cpu is entering a low power state */
+	CPU_PM_ENTER,
+
+	/* A single cpu failed to enter a low power state */
+	CPU_PM_ENTER_FAILED,
+
+	/* A single cpu is exiting a low power state */
+	CPU_PM_EXIT,
+
+	/* A cpu power domain is entering a low power state */
+	CPU_CLUSTER_PM_ENTER,
+
+	/* A cpu power domain failed to enter a low power state */
+	CPU_CLUSTER_PM_ENTER_FAILED,
+
+	/* A cpu power domain is exiting a low power state */
+	CPU_CLUSTER_PM_EXIT,
+};
+
+#ifdef CONFIG_CPU_PM
+int cpu_pm_register_notifier(struct notifier_block *nb);
+int cpu_pm_unregister_notifier(struct notifier_block *nb);
+int cpu_pm_enter(void);
+int cpu_pm_exit(void);
+int cpu_cluster_pm_enter(void);
+int cpu_cluster_pm_exit(void);
+
+#else
+
+static inline int cpu_pm_register_notifier(struct notifier_block *nb)
+{
+	return 0;
+}
+
+static inline int cpu_pm_unregister_notifier(struct notifier_block *nb)
+{
+	return 0;
+}
+
+static inline int cpu_pm_enter(void)
+{
+	return 0;
+}
+
+static inline int cpu_pm_exit(void)
+{
+	return 0;
+}
+
+static inline int cpu_cluster_pm_enter(void)
+{
+	return 0;
+}
+
+static inline int cpu_cluster_pm_exit(void)
+{
+	return 0;
+}
+#endif
+#endif
diff --git a/include/linux/cpu_rmap.h b/include/linux/cpu_rmap.h
new file mode 100644
index 00000000..473771a5
--- /dev/null
+++ b/include/linux/cpu_rmap.h
@@ -0,0 +1,73 @@
+/*
+ * cpu_rmap.c: CPU affinity reverse-map support
+ * Copyright 2011 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#include <linux/cpumask.h>
+#include <linux/gfp.h>
+#include <linux/slab.h>
+
+/**
+ * struct cpu_rmap - CPU affinity reverse-map
+ * @size: Number of objects to be reverse-mapped
+ * @used: Number of objects added
+ * @obj: Pointer to array of object pointers
+ * @near: For each CPU, the index and distance to the nearest object,
+ *      based on affinity masks
+ */
+struct cpu_rmap {
+	u16		size, used;
+	void		**obj;
+	struct {
+		u16	index;
+		u16	dist;
+	}		near[0];
+};
+#define CPU_RMAP_DIST_INF 0xffff
+
+extern struct cpu_rmap *alloc_cpu_rmap(unsigned int size, gfp_t flags);
+
+/**
+ * free_cpu_rmap - free CPU affinity reverse-map
+ * @rmap: Reverse-map allocated with alloc_cpu_rmap(), or %NULL
+ */
+static inline void free_cpu_rmap(struct cpu_rmap *rmap)
+{
+	kfree(rmap);
+}
+
+extern int cpu_rmap_add(struct cpu_rmap *rmap, void *obj);
+extern int cpu_rmap_update(struct cpu_rmap *rmap, u16 index,
+			   const struct cpumask *affinity);
+
+static inline u16 cpu_rmap_lookup_index(struct cpu_rmap *rmap, unsigned int cpu)
+{
+	return rmap->near[cpu].index;
+}
+
+static inline void *cpu_rmap_lookup_obj(struct cpu_rmap *rmap, unsigned int cpu)
+{
+	return rmap->obj[rmap->near[cpu].index];
+}
+
+#ifdef CONFIG_GENERIC_HARDIRQS
+
+/**
+ * alloc_irq_cpu_rmap - allocate CPU affinity reverse-map for IRQs
+ * @size: Number of objects to be mapped
+ *
+ * Must be called in process context.
+ */
+static inline struct cpu_rmap *alloc_irq_cpu_rmap(unsigned int size)
+{
+	return alloc_cpu_rmap(size, GFP_KERNEL);
+}
+extern void free_irq_cpu_rmap(struct cpu_rmap *rmap);
+
+extern int irq_cpu_rmap_add(struct cpu_rmap *rmap, int irq);
+
+#endif
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
new file mode 100644
index 00000000..d1c3bb0e
--- /dev/null
+++ b/include/linux/cpufreq.h
@@ -0,0 +1,412 @@
+/*
+ *  linux/include/linux/cpufreq.h
+ *
+ *  Copyright (C) 2001 Russell King
+ *            (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _LINUX_CPUFREQ_H
+#define _LINUX_CPUFREQ_H
+
+#include <linux/mutex.h>
+#include <linux/notifier.h>
+#include <linux/threads.h>
+#include <linux/kobject.h>
+#include <linux/sysfs.h>
+#include <linux/completion.h>
+#include <linux/workqueue.h>
+#include <linux/cpumask.h>
+#include <asm/div64.h>
+
+#define CPUFREQ_NAME_LEN 16
+
+
+/*********************************************************************
+ *                     CPUFREQ NOTIFIER INTERFACE                    *
+ *********************************************************************/
+
+#define CPUFREQ_TRANSITION_NOTIFIER	(0)
+#define CPUFREQ_POLICY_NOTIFIER		(1)
+
+#ifdef CONFIG_CPU_FREQ
+int cpufreq_register_notifier(struct notifier_block *nb, unsigned int list);
+int cpufreq_unregister_notifier(struct notifier_block *nb, unsigned int list);
+extern void disable_cpufreq(void);
+#else		/* CONFIG_CPU_FREQ */
+static inline int cpufreq_register_notifier(struct notifier_block *nb,
+						unsigned int list)
+{
+	return 0;
+}
+static inline int cpufreq_unregister_notifier(struct notifier_block *nb,
+						unsigned int list)
+{
+	return 0;
+}
+static inline void disable_cpufreq(void) { }
+#endif		/* CONFIG_CPU_FREQ */
+
+/* if (cpufreq_driver->target) exists, the ->governor decides what frequency
+ * within the limits is used. If (cpufreq_driver->setpolicy> exists, these
+ * two generic policies are available:
+ */
+
+#define CPUFREQ_POLICY_POWERSAVE	(1)
+#define CPUFREQ_POLICY_PERFORMANCE	(2)
+
+/* Frequency values here are CPU kHz so that hardware which doesn't run
+ * with some frequencies can complain without having to guess what per
+ * cent / per mille means.
+ * Maximum transition latency is in nanoseconds - if it's unknown,
+ * CPUFREQ_ETERNAL shall be used.
+ */
+
+struct cpufreq_governor;
+
+/* /sys/devices/system/cpu/cpufreq: entry point for global variables */
+extern struct kobject *cpufreq_global_kobject;
+
+#define CPUFREQ_ETERNAL			(-1)
+struct cpufreq_cpuinfo {
+	unsigned int		max_freq;
+	unsigned int		min_freq;
+
+	/* in 10^(-9) s = nanoseconds */
+	unsigned int		transition_latency;
+};
+
+struct cpufreq_real_policy {
+	unsigned int		min;    /* in kHz */
+	unsigned int		max;    /* in kHz */
+	unsigned int		policy; /* see above */
+	struct cpufreq_governor	*governor; /* see below */
+};
+
+struct cpufreq_policy {
+	cpumask_var_t		cpus;	/* CPUs requiring sw coordination */
+	cpumask_var_t		related_cpus; /* CPUs with any coordination */
+	unsigned int		shared_type; /* ANY or ALL affected CPUs
+						should set cpufreq */
+	unsigned int		cpu;    /* cpu nr of registered CPU */
+	struct cpufreq_cpuinfo	cpuinfo;/* see above */
+
+	unsigned int		min;    /* in kHz */
+	unsigned int		max;    /* in kHz */
+	unsigned int		cur;    /* in kHz, only needed if cpufreq
+					 * governors are used */
+	unsigned int		policy; /* see above */
+	struct cpufreq_governor	*governor; /* see below */
+
+	struct work_struct	update; /* if update_policy() needs to be
+					 * called, but you're in IRQ context */
+
+	struct cpufreq_real_policy	user_policy;
+
+	struct kobject		kobj;
+	struct completion	kobj_unregister;
+};
+
+#define CPUFREQ_ADJUST		(0)
+#define CPUFREQ_INCOMPATIBLE	(1)
+#define CPUFREQ_NOTIFY		(2)
+#define CPUFREQ_START		(3)
+
+#define CPUFREQ_SHARED_TYPE_NONE (0) /* None */
+#define CPUFREQ_SHARED_TYPE_HW	 (1) /* HW does needed coordination */
+#define CPUFREQ_SHARED_TYPE_ALL	 (2) /* All dependent CPUs should set freq */
+#define CPUFREQ_SHARED_TYPE_ANY	 (3) /* Freq can be set from any dependent CPU*/
+
+/******************** cpufreq transition notifiers *******************/
+
+#define CPUFREQ_PRECHANGE	(0)
+#define CPUFREQ_POSTCHANGE	(1)
+#define CPUFREQ_RESUMECHANGE	(8)
+#define CPUFREQ_SUSPENDCHANGE	(9)
+
+struct cpufreq_freqs {
+	unsigned int cpu;	/* cpu nr */
+	unsigned int old;
+	unsigned int new;
+	u8 flags;		/* flags of cpufreq_driver, see below. */
+};
+
+
+/**
+ * cpufreq_scale - "old * mult / div" calculation for large values (32-bit-arch safe)
+ * @old:   old value
+ * @div:   divisor
+ * @mult:  multiplier
+ *
+ *
+ *    new = old * mult / div
+ */
+static inline unsigned long cpufreq_scale(unsigned long old, u_int div, u_int mult)
+{
+#if BITS_PER_LONG == 32
+
+	u64 result = ((u64) old) * ((u64) mult);
+	do_div(result, div);
+	return (unsigned long) result;
+
+#elif BITS_PER_LONG == 64
+
+	unsigned long result = old * ((u64) mult);
+	result /= div;
+	return result;
+
+#endif
+};
+
+/*********************************************************************
+ *                          CPUFREQ GOVERNORS                        *
+ *********************************************************************/
+
+#define CPUFREQ_GOV_START  1
+#define CPUFREQ_GOV_STOP   2
+#define CPUFREQ_GOV_LIMITS 3
+
+struct cpufreq_governor {
+	char	name[CPUFREQ_NAME_LEN];
+	int	(*governor)	(struct cpufreq_policy *policy,
+				 unsigned int event);
+	ssize_t	(*show_setspeed)	(struct cpufreq_policy *policy,
+					 char *buf);
+	int	(*store_setspeed)	(struct cpufreq_policy *policy,
+					 unsigned int freq);
+	unsigned int max_transition_latency; /* HW must be able to switch to
+			next freq faster than this value in nano secs or we
+			will fallback to performance governor */
+	struct list_head	governor_list;
+	struct module		*owner;
+};
+
+/*
+ * Pass a target to the cpufreq driver.
+ */
+extern int cpufreq_driver_target(struct cpufreq_policy *policy,
+				 unsigned int target_freq,
+				 unsigned int relation);
+extern int __cpufreq_driver_target(struct cpufreq_policy *policy,
+				   unsigned int target_freq,
+				   unsigned int relation);
+
+
+extern int __cpufreq_driver_getavg(struct cpufreq_policy *policy,
+				   unsigned int cpu);
+
+int cpufreq_register_governor(struct cpufreq_governor *governor);
+void cpufreq_unregister_governor(struct cpufreq_governor *governor);
+
+
+/*********************************************************************
+ *                      CPUFREQ DRIVER INTERFACE                     *
+ *********************************************************************/
+
+#define CPUFREQ_RELATION_L 0  /* lowest frequency at or above target */
+#define CPUFREQ_RELATION_H 1  /* highest frequency below or at target */
+
+struct freq_attr;
+
+struct cpufreq_driver {
+	struct module           *owner;
+	char			name[CPUFREQ_NAME_LEN];
+	u8			flags;
+
+	/* needed by all drivers */
+	int	(*init)		(struct cpufreq_policy *policy);
+	int	(*verify)	(struct cpufreq_policy *policy);
+
+	/* define one out of two */
+	int	(*setpolicy)	(struct cpufreq_policy *policy);
+	int	(*target)	(struct cpufreq_policy *policy,
+				 unsigned int target_freq,
+				 unsigned int relation);
+
+	/* should be defined, if possible */
+	unsigned int	(*get)	(unsigned int cpu);
+
+	/* optional */
+	unsigned int (*getavg)	(struct cpufreq_policy *policy,
+				 unsigned int cpu);
+	int	(*bios_limit)	(int cpu, unsigned int *limit);
+
+	int	(*exit)		(struct cpufreq_policy *policy);
+	int	(*suspend)	(struct cpufreq_policy *policy);
+	int	(*resume)	(struct cpufreq_policy *policy);
+	struct freq_attr	**attr;
+};
+
+/* flags */
+
+#define CPUFREQ_STICKY		0x01	/* the driver isn't removed even if
+					 * all ->init() calls failed */
+#define CPUFREQ_CONST_LOOPS	0x02	/* loops_per_jiffy or other kernel
+					 * "constants" aren't affected by
+					 * frequency transitions */
+#define CPUFREQ_PM_NO_WARN	0x04	/* don't warn on suspend/resume speed
+					 * mismatches */
+
+int cpufreq_register_driver(struct cpufreq_driver *driver_data);
+int cpufreq_unregister_driver(struct cpufreq_driver *driver_data);
+
+
+void cpufreq_notify_transition(struct cpufreq_freqs *freqs, unsigned int state);
+
+
+static inline void cpufreq_verify_within_limits(struct cpufreq_policy *policy, unsigned int min, unsigned int max)
+{
+	if (policy->min < min)
+		policy->min = min;
+	if (policy->max < min)
+		policy->max = min;
+	if (policy->min > max)
+		policy->min = max;
+	if (policy->max > max)
+		policy->max = max;
+	if (policy->min > policy->max)
+		policy->min = policy->max;
+	return;
+}
+
+struct freq_attr {
+	struct attribute attr;
+	ssize_t (*show)(struct cpufreq_policy *, char *);
+	ssize_t (*store)(struct cpufreq_policy *, const char *, size_t count);
+};
+
+#define cpufreq_freq_attr_ro(_name)		\
+static struct freq_attr _name =			\
+__ATTR(_name, 0444, show_##_name, NULL)
+
+#define cpufreq_freq_attr_ro_perm(_name, _perm)	\
+static struct freq_attr _name =			\
+__ATTR(_name, _perm, show_##_name, NULL)
+
+#define cpufreq_freq_attr_rw(_name)		\
+static struct freq_attr _name =			\
+__ATTR(_name, 0644, show_##_name, store_##_name)
+
+struct global_attr {
+	struct attribute attr;
+	ssize_t (*show)(struct kobject *kobj,
+			struct attribute *attr, char *buf);
+	ssize_t (*store)(struct kobject *a, struct attribute *b,
+			 const char *c, size_t count);
+};
+
+#define define_one_global_ro(_name)		\
+static struct global_attr _name =		\
+__ATTR(_name, 0444, show_##_name, NULL)
+
+#define define_one_global_rw(_name)		\
+static struct global_attr _name =		\
+__ATTR(_name, 0644, show_##_name, store_##_name)
+
+
+/*********************************************************************
+ *                        CPUFREQ 2.6. INTERFACE                     *
+ *********************************************************************/
+int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu);
+int cpufreq_update_policy(unsigned int cpu);
+
+#ifdef CONFIG_CPU_FREQ
+/* query the current CPU frequency (in kHz). If zero, cpufreq couldn't detect it */
+unsigned int cpufreq_get(unsigned int cpu);
+#else
+static inline unsigned int cpufreq_get(unsigned int cpu)
+{
+	return 0;
+}
+#endif
+
+/* query the last known CPU freq (in kHz). If zero, cpufreq couldn't detect it */
+#ifdef CONFIG_CPU_FREQ
+unsigned int cpufreq_quick_get(unsigned int cpu);
+unsigned int cpufreq_quick_get_max(unsigned int cpu);
+#else
+static inline unsigned int cpufreq_quick_get(unsigned int cpu)
+{
+	return 0;
+}
+static inline unsigned int cpufreq_quick_get_max(unsigned int cpu)
+{
+	return 0;
+}
+#endif
+
+
+/*********************************************************************
+ *                       CPUFREQ DEFAULT GOVERNOR                    *
+ *********************************************************************/
+
+
+/*
+  Performance governor is fallback governor if any other gov failed to
+  auto load due latency restrictions
+*/
+#ifdef CONFIG_CPU_FREQ_GOV_PERFORMANCE
+extern struct cpufreq_governor cpufreq_gov_performance;
+#endif
+#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE
+#define CPUFREQ_DEFAULT_GOVERNOR	(&cpufreq_gov_performance)
+#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE)
+extern struct cpufreq_governor cpufreq_gov_powersave;
+#define CPUFREQ_DEFAULT_GOVERNOR	(&cpufreq_gov_powersave)
+#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE)
+extern struct cpufreq_governor cpufreq_gov_userspace;
+#define CPUFREQ_DEFAULT_GOVERNOR	(&cpufreq_gov_userspace)
+#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND)
+extern struct cpufreq_governor cpufreq_gov_ondemand;
+#define CPUFREQ_DEFAULT_GOVERNOR	(&cpufreq_gov_ondemand)
+#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE)
+extern struct cpufreq_governor cpufreq_gov_conservative;
+#define CPUFREQ_DEFAULT_GOVERNOR	(&cpufreq_gov_conservative)
+#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE)
+extern struct cpufreq_governor cpufreq_gov_interactive;
+#define CPUFREQ_DEFAULT_GOVERNOR	(&cpufreq_gov_interactive)
+#endif
+
+
+/*********************************************************************
+ *                     FREQUENCY TABLE HELPERS                       *
+ *********************************************************************/
+
+#define CPUFREQ_ENTRY_INVALID ~0
+#define CPUFREQ_TABLE_END     ~1
+
+struct cpufreq_frequency_table {
+	unsigned int	index;     /* any */
+	unsigned int	frequency; /* kHz - doesn't need to be in ascending
+				    * order */
+};
+
+int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy,
+				    struct cpufreq_frequency_table *table);
+
+int cpufreq_frequency_table_verify(struct cpufreq_policy *policy,
+				   struct cpufreq_frequency_table *table);
+
+int cpufreq_frequency_table_target(struct cpufreq_policy *policy,
+				   struct cpufreq_frequency_table *table,
+				   unsigned int target_freq,
+				   unsigned int relation,
+				   unsigned int *index);
+
+/* the following 3 funtions are for cpufreq core use only */
+struct cpufreq_frequency_table *cpufreq_frequency_get_table(unsigned int cpu);
+struct cpufreq_policy *cpufreq_cpu_get(unsigned int cpu);
+void   cpufreq_cpu_put(struct cpufreq_policy *data);
+
+/* the following are really really optional */
+extern struct freq_attr cpufreq_freq_attr_scaling_available_freqs;
+
+void cpufreq_frequency_table_get_attr(struct cpufreq_frequency_table *table,
+				      unsigned int cpu);
+
+void cpufreq_frequency_table_put_attr(unsigned int cpu);
+
+
+#endif /* _LINUX_CPUFREQ_H */
diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h
new file mode 100644
index 00000000..5ab71833
--- /dev/null
+++ b/include/linux/cpuidle.h
@@ -0,0 +1,237 @@
+/*
+ * cpuidle.h - a generic framework for CPU idle power management
+ *
+ * (C) 2007 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+ *          Shaohua Li <shaohua.li@intel.com>
+ *          Adam Belay <abelay@novell.com>
+ *
+ * This code is licenced under the GPL.
+ */
+
+#ifndef _LINUX_CPUIDLE_H
+#define _LINUX_CPUIDLE_H
+
+#include <linux/percpu.h>
+#include <linux/list.h>
+#include <linux/kobject.h>
+#include <linux/completion.h>
+#include <linux/hrtimer.h>
+
+#define CPUIDLE_STATE_MAX	8
+#define CPUIDLE_NAME_LEN	16
+#define CPUIDLE_DESC_LEN	32
+
+struct module;
+
+struct cpuidle_device;
+struct cpuidle_driver;
+
+
+/****************************
+ * CPUIDLE DEVICE INTERFACE *
+ ****************************/
+
+struct cpuidle_state_usage {
+	void		*driver_data;
+
+	unsigned long long	usage;
+	unsigned long long	time; /* in US */
+};
+
+struct cpuidle_state {
+	char		name[CPUIDLE_NAME_LEN];
+	char		desc[CPUIDLE_DESC_LEN];
+
+	unsigned int	flags;
+	unsigned int	exit_latency; /* in US */
+	int		power_usage; /* in mW */
+	unsigned int	target_residency; /* in US */
+	unsigned int    disable;
+
+	int (*enter)	(struct cpuidle_device *dev,
+			struct cpuidle_driver *drv,
+			int index);
+
+	int (*enter_dead) (struct cpuidle_device *dev, int index);
+};
+
+/* Idle State Flags */
+#define CPUIDLE_FLAG_TIME_VALID	(0x01) /* is residency time measurable? */
+#define CPUIDLE_FLAG_COUPLED	(0x02) /* state applies to multiple cpus */
+
+#define CPUIDLE_DRIVER_FLAGS_MASK (0xFFFF0000)
+
+/**
+ * cpuidle_get_statedata - retrieves private driver state data
+ * @st_usage: the state usage statistics
+ */
+static inline void *cpuidle_get_statedata(struct cpuidle_state_usage *st_usage)
+{
+	return st_usage->driver_data;
+}
+
+/**
+ * cpuidle_set_statedata - stores private driver state data
+ * @st_usage: the state usage statistics
+ * @data: the private data
+ */
+static inline void
+cpuidle_set_statedata(struct cpuidle_state_usage *st_usage, void *data)
+{
+	st_usage->driver_data = data;
+}
+
+struct cpuidle_state_kobj {
+	struct cpuidle_state *state;
+	struct cpuidle_state_usage *state_usage;
+	struct completion kobj_unregister;
+	struct kobject kobj;
+};
+
+struct cpuidle_device {
+	unsigned int		registered:1;
+	unsigned int		enabled:1;
+	unsigned int		cpu;
+
+	int			last_residency;
+	int			state_count;
+	struct cpuidle_state_usage	states_usage[CPUIDLE_STATE_MAX];
+	struct cpuidle_state_kobj *kobjs[CPUIDLE_STATE_MAX];
+
+	struct list_head 	device_list;
+	struct kobject		kobj;
+	struct completion	kobj_unregister;
+
+#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
+	int			safe_state_index;
+	cpumask_t		coupled_cpus;
+	struct cpuidle_coupled	*coupled;
+#endif
+};
+
+DECLARE_PER_CPU(struct cpuidle_device *, cpuidle_devices);
+
+/**
+ * cpuidle_get_last_residency - retrieves the last state's residency time
+ * @dev: the target CPU
+ *
+ * NOTE: this value is invalid if CPUIDLE_FLAG_TIME_VALID isn't set
+ */
+static inline int cpuidle_get_last_residency(struct cpuidle_device *dev)
+{
+	return dev->last_residency;
+}
+
+
+/****************************
+ * CPUIDLE DRIVER INTERFACE *
+ ****************************/
+
+struct cpuidle_driver {
+	const char		*name;
+	struct module 		*owner;
+
+	unsigned int		power_specified:1;
+	/* set to 1 to use the core cpuidle time keeping (for all states). */
+	unsigned int		en_core_tk_irqen:1;
+	struct cpuidle_state	states[CPUIDLE_STATE_MAX];
+	int			state_count;
+	int			safe_state_index;
+};
+
+#ifdef CONFIG_CPU_IDLE
+extern void disable_cpuidle(void);
+extern int cpuidle_idle_call(void);
+extern int cpuidle_register_driver(struct cpuidle_driver *drv);
+struct cpuidle_driver *cpuidle_get_driver(void);
+extern void cpuidle_unregister_driver(struct cpuidle_driver *drv);
+extern int cpuidle_register_device(struct cpuidle_device *dev);
+extern void cpuidle_unregister_device(struct cpuidle_device *dev);
+
+extern void cpuidle_pause_and_lock(void);
+extern void cpuidle_resume_and_unlock(void);
+extern int cpuidle_enable_device(struct cpuidle_device *dev);
+extern void cpuidle_disable_device(struct cpuidle_device *dev);
+extern int cpuidle_wrap_enter(struct cpuidle_device *dev,
+				struct cpuidle_driver *drv, int index,
+				int (*enter)(struct cpuidle_device *dev,
+					struct cpuidle_driver *drv, int index));
+extern int cpuidle_play_dead(void);
+
+#else
+static inline void disable_cpuidle(void) { }
+static inline int cpuidle_idle_call(void) { return -ENODEV; }
+static inline int cpuidle_register_driver(struct cpuidle_driver *drv)
+{return -ENODEV; }
+static inline struct cpuidle_driver *cpuidle_get_driver(void) {return NULL; }
+static inline void cpuidle_unregister_driver(struct cpuidle_driver *drv) { }
+static inline int cpuidle_register_device(struct cpuidle_device *dev)
+{return -ENODEV; }
+static inline void cpuidle_unregister_device(struct cpuidle_device *dev) { }
+
+static inline void cpuidle_pause_and_lock(void) { }
+static inline void cpuidle_resume_and_unlock(void) { }
+static inline int cpuidle_enable_device(struct cpuidle_device *dev)
+{return -ENODEV; }
+static inline void cpuidle_disable_device(struct cpuidle_device *dev) { }
+static inline int cpuidle_wrap_enter(struct cpuidle_device *dev,
+				struct cpuidle_driver *drv, int index,
+				int (*enter)(struct cpuidle_device *dev,
+					struct cpuidle_driver *drv, int index))
+{ return -ENODEV; }
+static inline int cpuidle_play_dead(void) {return -ENODEV; }
+
+#endif
+
+#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
+void cpuidle_coupled_parallel_barrier(struct cpuidle_device *dev, atomic_t *a);
+#endif
+
+/******************************
+ * CPUIDLE GOVERNOR INTERFACE *
+ ******************************/
+
+struct cpuidle_governor {
+	char			name[CPUIDLE_NAME_LEN];
+	struct list_head 	governor_list;
+	unsigned int		rating;
+
+	int  (*enable)		(struct cpuidle_driver *drv,
+					struct cpuidle_device *dev);
+	void (*disable)		(struct cpuidle_driver *drv,
+					struct cpuidle_device *dev);
+
+	int  (*select)		(struct cpuidle_driver *drv,
+					struct cpuidle_device *dev);
+	void (*reflect)		(struct cpuidle_device *dev, int index);
+
+	struct module 		*owner;
+};
+
+#ifdef CONFIG_CPU_IDLE
+
+extern int cpuidle_register_governor(struct cpuidle_governor *gov);
+extern void cpuidle_unregister_governor(struct cpuidle_governor *gov);
+
+#ifdef CONFIG_INTEL_IDLE
+extern int intel_idle_cpu_init(int cpu);
+#else
+static inline int intel_idle_cpu_init(int cpu) { return -1; }
+#endif
+
+#else
+static inline int intel_idle_cpu_init(int cpu) { return -1; }
+
+static inline int cpuidle_register_governor(struct cpuidle_governor *gov)
+{return 0;}
+static inline void cpuidle_unregister_governor(struct cpuidle_governor *gov) { }
+
+#endif
+
+#ifdef CONFIG_ARCH_HAS_CPU_RELAX
+#define CPUIDLE_DRIVER_STATE_START	1
+#else
+#define CPUIDLE_DRIVER_STATE_START	0
+#endif
+
+#endif /* _LINUX_CPUIDLE_H */
diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
new file mode 100644
index 00000000..a2c819d3
--- /dev/null
+++ b/include/linux/cpumask.h
@@ -0,0 +1,937 @@
+#ifndef __LINUX_CPUMASK_H
+#define __LINUX_CPUMASK_H
+
+/*
+ * Cpumasks provide a bitmap suitable for representing the
+ * set of CPU's in a system, one bit position per CPU number.  In general,
+ * only nr_cpu_ids (<= NR_CPUS) bits are valid.
+ */
+#include <linux/kernel.h>
+#include <linux/threads.h>
+#include <linux/bitmap.h>
+#include <linux/bug.h>
+
+typedef struct cpumask { DECLARE_BITMAP(bits, NR_CPUS); } cpumask_t;
+
+/**
+ * cpumask_bits - get the bits in a cpumask
+ * @maskp: the struct cpumask *
+ *
+ * You should only assume nr_cpu_ids bits of this mask are valid.  This is
+ * a macro so it's const-correct.
+ */
+#define cpumask_bits(maskp) ((maskp)->bits)
+
+#if NR_CPUS == 1
+#define nr_cpu_ids		1
+#else
+extern int nr_cpu_ids;
+#endif
+
+#ifdef CONFIG_CPUMASK_OFFSTACK
+/* Assuming NR_CPUS is huge, a runtime limit is more efficient.  Also,
+ * not all bits may be allocated. */
+#define nr_cpumask_bits	nr_cpu_ids
+#else
+#define nr_cpumask_bits	NR_CPUS
+#endif
+
+/*
+ * The following particular system cpumasks and operations manage
+ * possible, present, active and online cpus.
+ *
+ *     cpu_possible_mask- has bit 'cpu' set iff cpu is populatable
+ *     cpu_present_mask - has bit 'cpu' set iff cpu is populated
+ *     cpu_online_mask  - has bit 'cpu' set iff cpu available to scheduler
+ *     cpu_active_mask  - has bit 'cpu' set iff cpu available to migration
+ *
+ *  If !CONFIG_HOTPLUG_CPU, present == possible, and active == online.
+ *
+ *  The cpu_possible_mask is fixed at boot time, as the set of CPU id's
+ *  that it is possible might ever be plugged in at anytime during the
+ *  life of that system boot.  The cpu_present_mask is dynamic(*),
+ *  representing which CPUs are currently plugged in.  And
+ *  cpu_online_mask is the dynamic subset of cpu_present_mask,
+ *  indicating those CPUs available for scheduling.
+ *
+ *  If HOTPLUG is enabled, then cpu_possible_mask is forced to have
+ *  all NR_CPUS bits set, otherwise it is just the set of CPUs that
+ *  ACPI reports present at boot.
+ *
+ *  If HOTPLUG is enabled, then cpu_present_mask varies dynamically,
+ *  depending on what ACPI reports as currently plugged in, otherwise
+ *  cpu_present_mask is just a copy of cpu_possible_mask.
+ *
+ *  (*) Well, cpu_present_mask is dynamic in the hotplug case.  If not
+ *      hotplug, it's a copy of cpu_possible_mask, hence fixed at boot.
+ *
+ * Subtleties:
+ * 1) UP arch's (NR_CPUS == 1, CONFIG_SMP not defined) hardcode
+ *    assumption that their single CPU is online.  The UP
+ *    cpu_{online,possible,present}_masks are placebos.  Changing them
+ *    will have no useful affect on the following num_*_cpus()
+ *    and cpu_*() macros in the UP case.  This ugliness is a UP
+ *    optimization - don't waste any instructions or memory references
+ *    asking if you're online or how many CPUs there are if there is
+ *    only one CPU.
+ */
+
+extern const struct cpumask *const cpu_possible_mask;
+extern const struct cpumask *const cpu_online_mask;
+extern const struct cpumask *const cpu_present_mask;
+extern const struct cpumask *const cpu_active_mask;
+
+#if NR_CPUS > 1
+#define num_online_cpus()	cpumask_weight(cpu_online_mask)
+#define num_possible_cpus()	cpumask_weight(cpu_possible_mask)
+#define num_present_cpus()	cpumask_weight(cpu_present_mask)
+#define num_active_cpus()	cpumask_weight(cpu_active_mask)
+#define cpu_online(cpu)		cpumask_test_cpu((cpu), cpu_online_mask)
+#define cpu_possible(cpu)	cpumask_test_cpu((cpu), cpu_possible_mask)
+#define cpu_present(cpu)	cpumask_test_cpu((cpu), cpu_present_mask)
+#define cpu_active(cpu)		cpumask_test_cpu((cpu), cpu_active_mask)
+#else
+#define num_online_cpus()	1U
+#define num_possible_cpus()	1U
+#define num_present_cpus()	1U
+#define num_active_cpus()	1U
+#define cpu_online(cpu)		((cpu) == 0)
+#define cpu_possible(cpu)	((cpu) == 0)
+#define cpu_present(cpu)	((cpu) == 0)
+#define cpu_active(cpu)		((cpu) == 0)
+#endif
+
+/* verify cpu argument to cpumask_* operators */
+static inline unsigned int cpumask_check(unsigned int cpu)
+{
+#ifdef CONFIG_DEBUG_PER_CPU_MAPS
+	WARN_ON_ONCE(cpu >= nr_cpumask_bits);
+#endif /* CONFIG_DEBUG_PER_CPU_MAPS */
+	return cpu;
+}
+
+#if NR_CPUS == 1
+/* Uniprocessor.  Assume all masks are "1". */
+static inline unsigned int cpumask_first(const struct cpumask *srcp)
+{
+	return 0;
+}
+
+/* Valid inputs for n are -1 and 0. */
+static inline unsigned int cpumask_next(int n, const struct cpumask *srcp)
+{
+	return n+1;
+}
+
+static inline unsigned int cpumask_next_zero(int n, const struct cpumask *srcp)
+{
+	return n+1;
+}
+
+static inline unsigned int cpumask_next_and(int n,
+					    const struct cpumask *srcp,
+					    const struct cpumask *andp)
+{
+	return n+1;
+}
+
+/* cpu must be a valid cpu, ie 0, so there's no other choice. */
+static inline unsigned int cpumask_any_but(const struct cpumask *mask,
+					   unsigned int cpu)
+{
+	return 1;
+}
+
+#define for_each_cpu(cpu, mask)			\
+	for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask)
+#define for_each_cpu_not(cpu, mask)		\
+	for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask)
+#define for_each_cpu_and(cpu, mask, and)	\
+	for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask, (void)and)
+#else
+/**
+ * cpumask_first - get the first cpu in a cpumask
+ * @srcp: the cpumask pointer
+ *
+ * Returns >= nr_cpu_ids if no cpus set.
+ */
+static inline unsigned int cpumask_first(const struct cpumask *srcp)
+{
+	return find_first_bit(cpumask_bits(srcp), nr_cpumask_bits);
+}
+
+/**
+ * cpumask_next - get the next cpu in a cpumask
+ * @n: the cpu prior to the place to search (ie. return will be > @n)
+ * @srcp: the cpumask pointer
+ *
+ * Returns >= nr_cpu_ids if no further cpus set.
+ */
+static inline unsigned int cpumask_next(int n, const struct cpumask *srcp)
+{
+	/* -1 is a legal arg here. */
+	if (n != -1)
+		cpumask_check(n);
+	return find_next_bit(cpumask_bits(srcp), nr_cpumask_bits, n+1);
+}
+
+/**
+ * cpumask_next_zero - get the next unset cpu in a cpumask
+ * @n: the cpu prior to the place to search (ie. return will be > @n)
+ * @srcp: the cpumask pointer
+ *
+ * Returns >= nr_cpu_ids if no further cpus unset.
+ */
+static inline unsigned int cpumask_next_zero(int n, const struct cpumask *srcp)
+{
+	/* -1 is a legal arg here. */
+	if (n != -1)
+		cpumask_check(n);
+	return find_next_zero_bit(cpumask_bits(srcp), nr_cpumask_bits, n+1);
+}
+
+int cpumask_next_and(int n, const struct cpumask *, const struct cpumask *);
+int cpumask_any_but(const struct cpumask *mask, unsigned int cpu);
+
+/**
+ * for_each_cpu - iterate over every cpu in a mask
+ * @cpu: the (optionally unsigned) integer iterator
+ * @mask: the cpumask pointer
+ *
+ * After the loop, cpu is >= nr_cpu_ids.
+ */
+#define for_each_cpu(cpu, mask)				\
+	for ((cpu) = -1;				\
+		(cpu) = cpumask_next((cpu), (mask)),	\
+		(cpu) < nr_cpu_ids;)
+
+/**
+ * for_each_cpu_not - iterate over every cpu in a complemented mask
+ * @cpu: the (optionally unsigned) integer iterator
+ * @mask: the cpumask pointer
+ *
+ * After the loop, cpu is >= nr_cpu_ids.
+ */
+#define for_each_cpu_not(cpu, mask)				\
+	for ((cpu) = -1;					\
+		(cpu) = cpumask_next_zero((cpu), (mask)),	\
+		(cpu) < nr_cpu_ids;)
+
+/**
+ * for_each_cpu_and - iterate over every cpu in both masks
+ * @cpu: the (optionally unsigned) integer iterator
+ * @mask: the first cpumask pointer
+ * @and: the second cpumask pointer
+ *
+ * This saves a temporary CPU mask in many places.  It is equivalent to:
+ *	struct cpumask tmp;
+ *	cpumask_and(&tmp, &mask, &and);
+ *	for_each_cpu(cpu, &tmp)
+ *		...
+ *
+ * After the loop, cpu is >= nr_cpu_ids.
+ */
+#define for_each_cpu_and(cpu, mask, and)				\
+	for ((cpu) = -1;						\
+		(cpu) = cpumask_next_and((cpu), (mask), (and)),		\
+		(cpu) < nr_cpu_ids;)
+#endif /* SMP */
+
+#define CPU_BITS_NONE						\
+{								\
+	[0 ... BITS_TO_LONGS(NR_CPUS)-1] = 0UL			\
+}
+
+#define CPU_BITS_CPU0						\
+{								\
+	[0] =  1UL						\
+}
+
+/**
+ * cpumask_set_cpu - set a cpu in a cpumask
+ * @cpu: cpu number (< nr_cpu_ids)
+ * @dstp: the cpumask pointer
+ */
+static inline void cpumask_set_cpu(unsigned int cpu, struct cpumask *dstp)
+{
+	set_bit(cpumask_check(cpu), cpumask_bits(dstp));
+}
+
+/**
+ * cpumask_clear_cpu - clear a cpu in a cpumask
+ * @cpu: cpu number (< nr_cpu_ids)
+ * @dstp: the cpumask pointer
+ */
+static inline void cpumask_clear_cpu(int cpu, struct cpumask *dstp)
+{
+	clear_bit(cpumask_check(cpu), cpumask_bits(dstp));
+}
+
+/**
+ * cpumask_test_cpu - test for a cpu in a cpumask
+ * @cpu: cpu number (< nr_cpu_ids)
+ * @cpumask: the cpumask pointer
+ *
+ * No static inline type checking - see Subtlety (1) above.
+ */
+#define cpumask_test_cpu(cpu, cpumask) \
+	test_bit(cpumask_check(cpu), cpumask_bits((cpumask)))
+
+/**
+ * cpumask_test_and_set_cpu - atomically test and set a cpu in a cpumask
+ * @cpu: cpu number (< nr_cpu_ids)
+ * @cpumask: the cpumask pointer
+ *
+ * test_and_set_bit wrapper for cpumasks.
+ */
+static inline int cpumask_test_and_set_cpu(int cpu, struct cpumask *cpumask)
+{
+	return test_and_set_bit(cpumask_check(cpu), cpumask_bits(cpumask));
+}
+
+/**
+ * cpumask_test_and_clear_cpu - atomically test and clear a cpu in a cpumask
+ * @cpu: cpu number (< nr_cpu_ids)
+ * @cpumask: the cpumask pointer
+ *
+ * test_and_clear_bit wrapper for cpumasks.
+ */
+static inline int cpumask_test_and_clear_cpu(int cpu, struct cpumask *cpumask)
+{
+	return test_and_clear_bit(cpumask_check(cpu), cpumask_bits(cpumask));
+}
+
+/**
+ * cpumask_setall - set all cpus (< nr_cpu_ids) in a cpumask
+ * @dstp: the cpumask pointer
+ */
+static inline void cpumask_setall(struct cpumask *dstp)
+{
+	bitmap_fill(cpumask_bits(dstp), nr_cpumask_bits);
+}
+
+/**
+ * cpumask_clear - clear all cpus (< nr_cpu_ids) in a cpumask
+ * @dstp: the cpumask pointer
+ */
+static inline void cpumask_clear(struct cpumask *dstp)
+{
+	bitmap_zero(cpumask_bits(dstp), nr_cpumask_bits);
+}
+
+/**
+ * cpumask_and - *dstp = *src1p & *src2p
+ * @dstp: the cpumask result
+ * @src1p: the first input
+ * @src2p: the second input
+ */
+static inline int cpumask_and(struct cpumask *dstp,
+			       const struct cpumask *src1p,
+			       const struct cpumask *src2p)
+{
+	return bitmap_and(cpumask_bits(dstp), cpumask_bits(src1p),
+				       cpumask_bits(src2p), nr_cpumask_bits);
+}
+
+/**
+ * cpumask_or - *dstp = *src1p | *src2p
+ * @dstp: the cpumask result
+ * @src1p: the first input
+ * @src2p: the second input
+ */
+static inline void cpumask_or(struct cpumask *dstp, const struct cpumask *src1p,
+			      const struct cpumask *src2p)
+{
+	bitmap_or(cpumask_bits(dstp), cpumask_bits(src1p),
+				      cpumask_bits(src2p), nr_cpumask_bits);
+}
+
+/**
+ * cpumask_xor - *dstp = *src1p ^ *src2p
+ * @dstp: the cpumask result
+ * @src1p: the first input
+ * @src2p: the second input
+ */
+static inline void cpumask_xor(struct cpumask *dstp,
+			       const struct cpumask *src1p,
+			       const struct cpumask *src2p)
+{
+	bitmap_xor(cpumask_bits(dstp), cpumask_bits(src1p),
+				       cpumask_bits(src2p), nr_cpumask_bits);
+}
+
+/**
+ * cpumask_andnot - *dstp = *src1p & ~*src2p
+ * @dstp: the cpumask result
+ * @src1p: the first input
+ * @src2p: the second input
+ */
+static inline int cpumask_andnot(struct cpumask *dstp,
+				  const struct cpumask *src1p,
+				  const struct cpumask *src2p)
+{
+	return bitmap_andnot(cpumask_bits(dstp), cpumask_bits(src1p),
+					  cpumask_bits(src2p), nr_cpumask_bits);
+}
+
+/**
+ * cpumask_complement - *dstp = ~*srcp
+ * @dstp: the cpumask result
+ * @srcp: the input to invert
+ */
+static inline void cpumask_complement(struct cpumask *dstp,
+				      const struct cpumask *srcp)
+{
+	bitmap_complement(cpumask_bits(dstp), cpumask_bits(srcp),
+					      nr_cpumask_bits);
+}
+
+/**
+ * cpumask_equal - *src1p == *src2p
+ * @src1p: the first input
+ * @src2p: the second input
+ */
+static inline bool cpumask_equal(const struct cpumask *src1p,
+				const struct cpumask *src2p)
+{
+	return bitmap_equal(cpumask_bits(src1p), cpumask_bits(src2p),
+						 nr_cpumask_bits);
+}
+
+/**
+ * cpumask_intersects - (*src1p & *src2p) != 0
+ * @src1p: the first input
+ * @src2p: the second input
+ */
+static inline bool cpumask_intersects(const struct cpumask *src1p,
+				     const struct cpumask *src2p)
+{
+	return bitmap_intersects(cpumask_bits(src1p), cpumask_bits(src2p),
+						      nr_cpumask_bits);
+}
+
+/**
+ * cpumask_subset - (*src1p & ~*src2p) == 0
+ * @src1p: the first input
+ * @src2p: the second input
+ */
+static inline int cpumask_subset(const struct cpumask *src1p,
+				 const struct cpumask *src2p)
+{
+	return bitmap_subset(cpumask_bits(src1p), cpumask_bits(src2p),
+						  nr_cpumask_bits);
+}
+
+/**
+ * cpumask_empty - *srcp == 0
+ * @srcp: the cpumask to that all cpus < nr_cpu_ids are clear.
+ */
+static inline bool cpumask_empty(const struct cpumask *srcp)
+{
+	return bitmap_empty(cpumask_bits(srcp), nr_cpumask_bits);
+}
+
+/**
+ * cpumask_full - *srcp == 0xFFFFFFFF...
+ * @srcp: the cpumask to that all cpus < nr_cpu_ids are set.
+ */
+static inline bool cpumask_full(const struct cpumask *srcp)
+{
+	return bitmap_full(cpumask_bits(srcp), nr_cpumask_bits);
+}
+
+/**
+ * cpumask_weight - Count of bits in *srcp
+ * @srcp: the cpumask to count bits (< nr_cpu_ids) in.
+ */
+static inline unsigned int cpumask_weight(const struct cpumask *srcp)
+{
+	return bitmap_weight(cpumask_bits(srcp), nr_cpumask_bits);
+}
+
+/**
+ * cpumask_shift_right - *dstp = *srcp >> n
+ * @dstp: the cpumask result
+ * @srcp: the input to shift
+ * @n: the number of bits to shift by
+ */
+static inline void cpumask_shift_right(struct cpumask *dstp,
+				       const struct cpumask *srcp, int n)
+{
+	bitmap_shift_right(cpumask_bits(dstp), cpumask_bits(srcp), n,
+					       nr_cpumask_bits);
+}
+
+/**
+ * cpumask_shift_left - *dstp = *srcp << n
+ * @dstp: the cpumask result
+ * @srcp: the input to shift
+ * @n: the number of bits to shift by
+ */
+static inline void cpumask_shift_left(struct cpumask *dstp,
+				      const struct cpumask *srcp, int n)
+{
+	bitmap_shift_left(cpumask_bits(dstp), cpumask_bits(srcp), n,
+					      nr_cpumask_bits);
+}
+
+/**
+ * cpumask_copy - *dstp = *srcp
+ * @dstp: the result
+ * @srcp: the input cpumask
+ */
+static inline void cpumask_copy(struct cpumask *dstp,
+				const struct cpumask *srcp)
+{
+	bitmap_copy(cpumask_bits(dstp), cpumask_bits(srcp), nr_cpumask_bits);
+}
+
+/**
+ * cpumask_any - pick a "random" cpu from *srcp
+ * @srcp: the input cpumask
+ *
+ * Returns >= nr_cpu_ids if no cpus set.
+ */
+#define cpumask_any(srcp) cpumask_first(srcp)
+
+/**
+ * cpumask_first_and - return the first cpu from *srcp1 & *srcp2
+ * @src1p: the first input
+ * @src2p: the second input
+ *
+ * Returns >= nr_cpu_ids if no cpus set in both.  See also cpumask_next_and().
+ */
+#define cpumask_first_and(src1p, src2p) cpumask_next_and(-1, (src1p), (src2p))
+
+/**
+ * cpumask_any_and - pick a "random" cpu from *mask1 & *mask2
+ * @mask1: the first input cpumask
+ * @mask2: the second input cpumask
+ *
+ * Returns >= nr_cpu_ids if no cpus set.
+ */
+#define cpumask_any_and(mask1, mask2) cpumask_first_and((mask1), (mask2))
+
+/**
+ * cpumask_of - the cpumask containing just a given cpu
+ * @cpu: the cpu (<= nr_cpu_ids)
+ */
+#define cpumask_of(cpu) (get_cpu_mask(cpu))
+
+/**
+ * cpumask_scnprintf - print a cpumask into a string as comma-separated hex
+ * @buf: the buffer to sprintf into
+ * @len: the length of the buffer
+ * @srcp: the cpumask to print
+ *
+ * If len is zero, returns zero.  Otherwise returns the length of the
+ * (nul-terminated) @buf string.
+ */
+static inline int cpumask_scnprintf(char *buf, int len,
+				    const struct cpumask *srcp)
+{
+	return bitmap_scnprintf(buf, len, cpumask_bits(srcp), nr_cpumask_bits);
+}
+
+/**
+ * cpumask_parse_user - extract a cpumask from a user string
+ * @buf: the buffer to extract from
+ * @len: the length of the buffer
+ * @dstp: the cpumask to set.
+ *
+ * Returns -errno, or 0 for success.
+ */
+static inline int cpumask_parse_user(const char __user *buf, int len,
+				     struct cpumask *dstp)
+{
+	return bitmap_parse_user(buf, len, cpumask_bits(dstp), nr_cpumask_bits);
+}
+
+/**
+ * cpumask_parselist_user - extract a cpumask from a user string
+ * @buf: the buffer to extract from
+ * @len: the length of the buffer
+ * @dstp: the cpumask to set.
+ *
+ * Returns -errno, or 0 for success.
+ */
+static inline int cpumask_parselist_user(const char __user *buf, int len,
+				     struct cpumask *dstp)
+{
+	return bitmap_parselist_user(buf, len, cpumask_bits(dstp),
+							nr_cpumask_bits);
+}
+
+/**
+ * cpulist_scnprintf - print a cpumask into a string as comma-separated list
+ * @buf: the buffer to sprintf into
+ * @len: the length of the buffer
+ * @srcp: the cpumask to print
+ *
+ * If len is zero, returns zero.  Otherwise returns the length of the
+ * (nul-terminated) @buf string.
+ */
+static inline int cpulist_scnprintf(char *buf, int len,
+				    const struct cpumask *srcp)
+{
+	return bitmap_scnlistprintf(buf, len, cpumask_bits(srcp),
+				    nr_cpumask_bits);
+}
+
+/**
+ * cpulist_parse_user - extract a cpumask from a user string of ranges
+ * @buf: the buffer to extract from
+ * @len: the length of the buffer
+ * @dstp: the cpumask to set.
+ *
+ * Returns -errno, or 0 for success.
+ */
+static inline int cpulist_parse(const char *buf, struct cpumask *dstp)
+{
+	return bitmap_parselist(buf, cpumask_bits(dstp), nr_cpumask_bits);
+}
+
+/**
+ * cpumask_size - size to allocate for a 'struct cpumask' in bytes
+ *
+ * This will eventually be a runtime variable, depending on nr_cpu_ids.
+ */
+static inline size_t cpumask_size(void)
+{
+	/* FIXME: Once all cpumask assignments are eliminated, this
+	 * can be nr_cpumask_bits */
+	return BITS_TO_LONGS(NR_CPUS) * sizeof(long);
+}
+
+/*
+ * cpumask_var_t: struct cpumask for stack usage.
+ *
+ * Oh, the wicked games we play!  In order to make kernel coding a
+ * little more difficult, we typedef cpumask_var_t to an array or a
+ * pointer: doing &mask on an array is a noop, so it still works.
+ *
+ * ie.
+ *	cpumask_var_t tmpmask;
+ *	if (!alloc_cpumask_var(&tmpmask, GFP_KERNEL))
+ *		return -ENOMEM;
+ *
+ *	  ... use 'tmpmask' like a normal struct cpumask * ...
+ *
+ *	free_cpumask_var(tmpmask);
+ *
+ *
+ * However, one notable exception is there. alloc_cpumask_var() allocates
+ * only nr_cpumask_bits bits (in the other hand, real cpumask_t always has
+ * NR_CPUS bits). Therefore you don't have to dereference cpumask_var_t.
+ *
+ *	cpumask_var_t tmpmask;
+ *	if (!alloc_cpumask_var(&tmpmask, GFP_KERNEL))
+ *		return -ENOMEM;
+ *
+ *	var = *tmpmask;
+ *
+ * This code makes NR_CPUS length memcopy and brings to a memory corruption.
+ * cpumask_copy() provide safe copy functionality.
+ */
+#ifdef CONFIG_CPUMASK_OFFSTACK
+typedef struct cpumask *cpumask_var_t;
+
+bool alloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags, int node);
+bool alloc_cpumask_var(cpumask_var_t *mask, gfp_t flags);
+bool zalloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags, int node);
+bool zalloc_cpumask_var(cpumask_var_t *mask, gfp_t flags);
+void alloc_bootmem_cpumask_var(cpumask_var_t *mask);
+void free_cpumask_var(cpumask_var_t mask);
+void free_bootmem_cpumask_var(cpumask_var_t mask);
+
+#else
+typedef struct cpumask cpumask_var_t[1];
+
+static inline bool alloc_cpumask_var(cpumask_var_t *mask, gfp_t flags)
+{
+	return true;
+}
+
+static inline bool alloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags,
+					  int node)
+{
+	return true;
+}
+
+static inline bool zalloc_cpumask_var(cpumask_var_t *mask, gfp_t flags)
+{
+	cpumask_clear(*mask);
+	return true;
+}
+
+static inline bool zalloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags,
+					  int node)
+{
+	cpumask_clear(*mask);
+	return true;
+}
+
+static inline void alloc_bootmem_cpumask_var(cpumask_var_t *mask)
+{
+}
+
+static inline void free_cpumask_var(cpumask_var_t mask)
+{
+}
+
+static inline void free_bootmem_cpumask_var(cpumask_var_t mask)
+{
+}
+#endif /* CONFIG_CPUMASK_OFFSTACK */
+
+/* It's common to want to use cpu_all_mask in struct member initializers,
+ * so it has to refer to an address rather than a pointer. */
+extern const DECLARE_BITMAP(cpu_all_bits, NR_CPUS);
+#define cpu_all_mask to_cpumask(cpu_all_bits)
+
+/* First bits of cpu_bit_bitmap are in fact unset. */
+#define cpu_none_mask to_cpumask(cpu_bit_bitmap[0])
+
+#define for_each_possible_cpu(cpu) for_each_cpu((cpu), cpu_possible_mask)
+#define for_each_online_cpu(cpu)   for_each_cpu((cpu), cpu_online_mask)
+#define for_each_present_cpu(cpu)  for_each_cpu((cpu), cpu_present_mask)
+
+/* Wrappers for arch boot code to manipulate normally-constant masks */
+void set_cpu_possible(unsigned int cpu, bool possible);
+void set_cpu_present(unsigned int cpu, bool present);
+void set_cpu_online(unsigned int cpu, bool online);
+void set_cpu_active(unsigned int cpu, bool active);
+void init_cpu_present(const struct cpumask *src);
+void init_cpu_possible(const struct cpumask *src);
+void init_cpu_online(const struct cpumask *src);
+
+/**
+ * to_cpumask - convert an NR_CPUS bitmap to a struct cpumask *
+ * @bitmap: the bitmap
+ *
+ * There are a few places where cpumask_var_t isn't appropriate and
+ * static cpumasks must be used (eg. very early boot), yet we don't
+ * expose the definition of 'struct cpumask'.
+ *
+ * This does the conversion, and can be used as a constant initializer.
+ */
+#define to_cpumask(bitmap)						\
+	((struct cpumask *)(1 ? (bitmap)				\
+			    : (void *)sizeof(__check_is_bitmap(bitmap))))
+
+static inline int __check_is_bitmap(const unsigned long *bitmap)
+{
+	return 1;
+}
+
+/*
+ * Special-case data structure for "single bit set only" constant CPU masks.
+ *
+ * We pre-generate all the 64 (or 32) possible bit positions, with enough
+ * padding to the left and the right, and return the constant pointer
+ * appropriately offset.
+ */
+extern const unsigned long
+	cpu_bit_bitmap[BITS_PER_LONG+1][BITS_TO_LONGS(NR_CPUS)];
+
+static inline const struct cpumask *get_cpu_mask(unsigned int cpu)
+{
+	const unsigned long *p = cpu_bit_bitmap[1 + cpu % BITS_PER_LONG];
+	p -= cpu / BITS_PER_LONG;
+	return to_cpumask(p);
+}
+
+#define cpu_is_offline(cpu)	unlikely(!cpu_online(cpu))
+
+#if NR_CPUS <= BITS_PER_LONG
+#define CPU_BITS_ALL						\
+{								\
+	[BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD	\
+}
+
+#else /* NR_CPUS > BITS_PER_LONG */
+
+#define CPU_BITS_ALL						\
+{								\
+	[0 ... BITS_TO_LONGS(NR_CPUS)-2] = ~0UL,		\
+	[BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD		\
+}
+#endif /* NR_CPUS > BITS_PER_LONG */
+
+/*
+ *
+ * From here down, all obsolete.  Use cpumask_ variants!
+ *
+ */
+#ifndef CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS
+#define cpumask_of_cpu(cpu) (*get_cpu_mask(cpu))
+
+#define CPU_MASK_LAST_WORD BITMAP_LAST_WORD_MASK(NR_CPUS)
+
+#if NR_CPUS <= BITS_PER_LONG
+
+#define CPU_MASK_ALL							\
+(cpumask_t) { {								\
+	[BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD			\
+} }
+
+#else
+
+#define CPU_MASK_ALL							\
+(cpumask_t) { {								\
+	[0 ... BITS_TO_LONGS(NR_CPUS)-2] = ~0UL,			\
+	[BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD			\
+} }
+
+#endif
+
+#define CPU_MASK_NONE							\
+(cpumask_t) { {								\
+	[0 ... BITS_TO_LONGS(NR_CPUS)-1] =  0UL				\
+} }
+
+#define CPU_MASK_CPU0							\
+(cpumask_t) { {								\
+	[0] =  1UL							\
+} }
+
+#if NR_CPUS == 1
+#define first_cpu(src)		({ (void)(src); 0; })
+#define next_cpu(n, src)	({ (void)(src); 1; })
+#define any_online_cpu(mask)	0
+#define for_each_cpu_mask(cpu, mask)	\
+	for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask)
+#else /* NR_CPUS > 1 */
+int __first_cpu(const cpumask_t *srcp);
+int __next_cpu(int n, const cpumask_t *srcp);
+
+#define first_cpu(src)		__first_cpu(&(src))
+#define next_cpu(n, src)	__next_cpu((n), &(src))
+#define any_online_cpu(mask) cpumask_any_and(&mask, cpu_online_mask)
+#define for_each_cpu_mask(cpu, mask)			\
+	for ((cpu) = -1;				\
+		(cpu) = next_cpu((cpu), (mask)),	\
+		(cpu) < NR_CPUS; )
+#endif /* SMP */
+
+#if NR_CPUS <= 64
+
+#define for_each_cpu_mask_nr(cpu, mask)	for_each_cpu_mask(cpu, mask)
+
+#else /* NR_CPUS > 64 */
+
+int __next_cpu_nr(int n, const cpumask_t *srcp);
+#define for_each_cpu_mask_nr(cpu, mask)			\
+	for ((cpu) = -1;				\
+		(cpu) = __next_cpu_nr((cpu), &(mask)),	\
+		(cpu) < nr_cpu_ids; )
+
+#endif /* NR_CPUS > 64 */
+
+#define cpus_addr(src) ((src).bits)
+
+#define cpu_set(cpu, dst) __cpu_set((cpu), &(dst))
+static inline void __cpu_set(int cpu, volatile cpumask_t *dstp)
+{
+	set_bit(cpu, dstp->bits);
+}
+
+#define cpu_clear(cpu, dst) __cpu_clear((cpu), &(dst))
+static inline void __cpu_clear(int cpu, volatile cpumask_t *dstp)
+{
+	clear_bit(cpu, dstp->bits);
+}
+
+#define cpus_setall(dst) __cpus_setall(&(dst), NR_CPUS)
+static inline void __cpus_setall(cpumask_t *dstp, int nbits)
+{
+	bitmap_fill(dstp->bits, nbits);
+}
+
+#define cpus_clear(dst) __cpus_clear(&(dst), NR_CPUS)
+static inline void __cpus_clear(cpumask_t *dstp, int nbits)
+{
+	bitmap_zero(dstp->bits, nbits);
+}
+
+/* No static inline type checking - see Subtlety (1) above. */
+#define cpu_isset(cpu, cpumask) test_bit((cpu), (cpumask).bits)
+
+#define cpu_test_and_set(cpu, cpumask) __cpu_test_and_set((cpu), &(cpumask))
+static inline int __cpu_test_and_set(int cpu, cpumask_t *addr)
+{
+	return test_and_set_bit(cpu, addr->bits);
+}
+
+#define cpus_and(dst, src1, src2) __cpus_and(&(dst), &(src1), &(src2), NR_CPUS)
+static inline int __cpus_and(cpumask_t *dstp, const cpumask_t *src1p,
+					const cpumask_t *src2p, int nbits)
+{
+	return bitmap_and(dstp->bits, src1p->bits, src2p->bits, nbits);
+}
+
+#define cpus_or(dst, src1, src2) __cpus_or(&(dst), &(src1), &(src2), NR_CPUS)
+static inline void __cpus_or(cpumask_t *dstp, const cpumask_t *src1p,
+					const cpumask_t *src2p, int nbits)
+{
+	bitmap_or(dstp->bits, src1p->bits, src2p->bits, nbits);
+}
+
+#define cpus_xor(dst, src1, src2) __cpus_xor(&(dst), &(src1), &(src2), NR_CPUS)
+static inline void __cpus_xor(cpumask_t *dstp, const cpumask_t *src1p,
+					const cpumask_t *src2p, int nbits)
+{
+	bitmap_xor(dstp->bits, src1p->bits, src2p->bits, nbits);
+}
+
+#define cpus_andnot(dst, src1, src2) \
+				__cpus_andnot(&(dst), &(src1), &(src2), NR_CPUS)
+static inline int __cpus_andnot(cpumask_t *dstp, const cpumask_t *src1p,
+					const cpumask_t *src2p, int nbits)
+{
+	return bitmap_andnot(dstp->bits, src1p->bits, src2p->bits, nbits);
+}
+
+#define cpus_equal(src1, src2) __cpus_equal(&(src1), &(src2), NR_CPUS)
+static inline int __cpus_equal(const cpumask_t *src1p,
+					const cpumask_t *src2p, int nbits)
+{
+	return bitmap_equal(src1p->bits, src2p->bits, nbits);
+}
+
+#define cpus_intersects(src1, src2) __cpus_intersects(&(src1), &(src2), NR_CPUS)
+static inline int __cpus_intersects(const cpumask_t *src1p,
+					const cpumask_t *src2p, int nbits)
+{
+	return bitmap_intersects(src1p->bits, src2p->bits, nbits);
+}
+
+#define cpus_subset(src1, src2) __cpus_subset(&(src1), &(src2), NR_CPUS)
+static inline int __cpus_subset(const cpumask_t *src1p,
+					const cpumask_t *src2p, int nbits)
+{
+	return bitmap_subset(src1p->bits, src2p->bits, nbits);
+}
+
+#define cpus_empty(src) __cpus_empty(&(src), NR_CPUS)
+static inline int __cpus_empty(const cpumask_t *srcp, int nbits)
+{
+	return bitmap_empty(srcp->bits, nbits);
+}
+
+#define cpus_weight(cpumask) __cpus_weight(&(cpumask), NR_CPUS)
+static inline int __cpus_weight(const cpumask_t *srcp, int nbits)
+{
+	return bitmap_weight(srcp->bits, nbits);
+}
+
+#define cpus_shift_left(dst, src, n) \
+			__cpus_shift_left(&(dst), &(src), (n), NR_CPUS)
+static inline void __cpus_shift_left(cpumask_t *dstp,
+					const cpumask_t *srcp, int n, int nbits)
+{
+	bitmap_shift_left(dstp->bits, srcp->bits, n, nbits);
+}
+#endif /* !CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS */
+
+#endif /* __LINUX_CPUMASK_H */
diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h
new file mode 100644
index 00000000..668f66ba
--- /dev/null
+++ b/include/linux/cpuset.h
@@ -0,0 +1,238 @@
+#ifndef _LINUX_CPUSET_H
+#define _LINUX_CPUSET_H
+/*
+ *  cpuset interface
+ *
+ *  Copyright (C) 2003 BULL SA
+ *  Copyright (C) 2004-2006 Silicon Graphics, Inc.
+ *
+ */
+
+#include <linux/sched.h>
+#include <linux/cpumask.h>
+#include <linux/nodemask.h>
+#include <linux/cgroup.h>
+#include <linux/mm.h>
+
+#ifdef CONFIG_CPUSETS
+
+extern int number_of_cpusets;	/* How many cpusets are defined in system? */
+
+extern int cpuset_init(void);
+extern void cpuset_init_smp(void);
+extern void cpuset_update_active_cpus(void);
+extern void cpuset_cpus_allowed(struct task_struct *p, struct cpumask *mask);
+extern void cpuset_cpus_allowed_fallback(struct task_struct *p);
+extern nodemask_t cpuset_mems_allowed(struct task_struct *p);
+#define cpuset_current_mems_allowed (current->mems_allowed)
+void cpuset_init_current_mems_allowed(void);
+int cpuset_nodemask_valid_mems_allowed(nodemask_t *nodemask);
+
+extern int __cpuset_node_allowed_softwall(int node, gfp_t gfp_mask);
+extern int __cpuset_node_allowed_hardwall(int node, gfp_t gfp_mask);
+
+static inline int cpuset_node_allowed_softwall(int node, gfp_t gfp_mask)
+{
+	return number_of_cpusets <= 1 ||
+		__cpuset_node_allowed_softwall(node, gfp_mask);
+}
+
+static inline int cpuset_node_allowed_hardwall(int node, gfp_t gfp_mask)
+{
+	return number_of_cpusets <= 1 ||
+		__cpuset_node_allowed_hardwall(node, gfp_mask);
+}
+
+static inline int cpuset_zone_allowed_softwall(struct zone *z, gfp_t gfp_mask)
+{
+	return cpuset_node_allowed_softwall(zone_to_nid(z), gfp_mask);
+}
+
+static inline int cpuset_zone_allowed_hardwall(struct zone *z, gfp_t gfp_mask)
+{
+	return cpuset_node_allowed_hardwall(zone_to_nid(z), gfp_mask);
+}
+
+extern int cpuset_mems_allowed_intersects(const struct task_struct *tsk1,
+					  const struct task_struct *tsk2);
+
+#define cpuset_memory_pressure_bump() 				\
+	do {							\
+		if (cpuset_memory_pressure_enabled)		\
+			__cpuset_memory_pressure_bump();	\
+	} while (0)
+extern int cpuset_memory_pressure_enabled;
+extern void __cpuset_memory_pressure_bump(void);
+
+extern const struct file_operations proc_cpuset_operations;
+struct seq_file;
+extern void cpuset_task_status_allowed(struct seq_file *m,
+					struct task_struct *task);
+
+extern int cpuset_mem_spread_node(void);
+extern int cpuset_slab_spread_node(void);
+
+static inline int cpuset_do_page_mem_spread(void)
+{
+	return current->flags & PF_SPREAD_PAGE;
+}
+
+static inline int cpuset_do_slab_mem_spread(void)
+{
+	return current->flags & PF_SPREAD_SLAB;
+}
+
+extern int current_cpuset_is_being_rebound(void);
+
+extern void rebuild_sched_domains(void);
+
+extern void cpuset_print_task_mems_allowed(struct task_struct *p);
+
+/*
+ * get_mems_allowed is required when making decisions involving mems_allowed
+ * such as during page allocation. mems_allowed can be updated in parallel
+ * and depending on the new value an operation can fail potentially causing
+ * process failure. A retry loop with get_mems_allowed and put_mems_allowed
+ * prevents these artificial failures.
+ */
+static inline unsigned int get_mems_allowed(void)
+{
+	return read_seqcount_begin(&current->mems_allowed_seq);
+}
+
+/*
+ * If this returns false, the operation that took place after get_mems_allowed
+ * may have failed. It is up to the caller to retry the operation if
+ * appropriate.
+ */
+static inline bool put_mems_allowed(unsigned int seq)
+{
+	return !read_seqcount_retry(&current->mems_allowed_seq, seq);
+}
+
+static inline void set_mems_allowed(nodemask_t nodemask)
+{
+	task_lock(current);
+	write_seqcount_begin(&current->mems_allowed_seq);
+	current->mems_allowed = nodemask;
+	write_seqcount_end(&current->mems_allowed_seq);
+	task_unlock(current);
+}
+
+#else /* !CONFIG_CPUSETS */
+
+static inline int cpuset_init(void) { return 0; }
+static inline void cpuset_init_smp(void) {}
+
+static inline void cpuset_update_active_cpus(void)
+{
+	partition_sched_domains(1, NULL, NULL);
+}
+
+static inline void cpuset_cpus_allowed(struct task_struct *p,
+				       struct cpumask *mask)
+{
+	cpumask_copy(mask, cpu_possible_mask);
+}
+
+static inline void cpuset_cpus_allowed_fallback(struct task_struct *p)
+{
+}
+
+static inline nodemask_t cpuset_mems_allowed(struct task_struct *p)
+{
+	return node_possible_map;
+}
+
+#define cpuset_current_mems_allowed (node_states[N_HIGH_MEMORY])
+static inline void cpuset_init_current_mems_allowed(void) {}
+
+static inline int cpuset_nodemask_valid_mems_allowed(nodemask_t *nodemask)
+{
+	return 1;
+}
+
+static inline int cpuset_node_allowed_softwall(int node, gfp_t gfp_mask)
+{
+	return 1;
+}
+
+static inline int cpuset_node_allowed_hardwall(int node, gfp_t gfp_mask)
+{
+	return 1;
+}
+
+static inline int cpuset_zone_allowed_softwall(struct zone *z, gfp_t gfp_mask)
+{
+	return 1;
+}
+
+static inline int cpuset_zone_allowed_hardwall(struct zone *z, gfp_t gfp_mask)
+{
+	return 1;
+}
+
+static inline int cpuset_mems_allowed_intersects(const struct task_struct *tsk1,
+						 const struct task_struct *tsk2)
+{
+	return 1;
+}
+
+static inline void cpuset_memory_pressure_bump(void) {}
+
+static inline void cpuset_task_status_allowed(struct seq_file *m,
+						struct task_struct *task)
+{
+}
+
+static inline int cpuset_mem_spread_node(void)
+{
+	return 0;
+}
+
+static inline int cpuset_slab_spread_node(void)
+{
+	return 0;
+}
+
+static inline int cpuset_do_page_mem_spread(void)
+{
+	return 0;
+}
+
+static inline int cpuset_do_slab_mem_spread(void)
+{
+	return 0;
+}
+
+static inline int current_cpuset_is_being_rebound(void)
+{
+	return 0;
+}
+
+static inline void rebuild_sched_domains(void)
+{
+	partition_sched_domains(1, NULL, NULL);
+}
+
+static inline void cpuset_print_task_mems_allowed(struct task_struct *p)
+{
+}
+
+static inline void set_mems_allowed(nodemask_t nodemask)
+{
+}
+
+static inline unsigned int get_mems_allowed(void)
+{
+	return 0;
+}
+
+static inline bool put_mems_allowed(unsigned int seq)
+{
+	return true;
+}
+
+#endif /* !CONFIG_CPUSETS */
+
+#endif /* _LINUX_CPUSET_H */
diff --git a/include/linux/cramfs_fs.h b/include/linux/cramfs_fs.h
new file mode 100644
index 00000000..0e7bf272
--- /dev/null
+++ b/include/linux/cramfs_fs.h
@@ -0,0 +1,94 @@
+#ifndef __CRAMFS_H
+#define __CRAMFS_H
+
+#include <linux/types.h>
+#include <linux/magic.h>
+
+#define CRAMFS_SIGNATURE	"Compressed ROMFS"
+
+/*
+ * Width of various bitfields in struct cramfs_inode.
+ * Primarily used to generate warnings in mkcramfs.
+ */
+#define CRAMFS_MODE_WIDTH 16
+#define CRAMFS_UID_WIDTH 16
+#define CRAMFS_SIZE_WIDTH 24
+#define CRAMFS_GID_WIDTH 8
+#define CRAMFS_NAMELEN_WIDTH 6
+#define CRAMFS_OFFSET_WIDTH 26
+
+/*
+ * Since inode.namelen is a unsigned 6-bit number, the maximum cramfs
+ * path length is 63 << 2 = 252.
+ */
+#define CRAMFS_MAXPATHLEN (((1 << CRAMFS_NAMELEN_WIDTH) - 1) << 2)
+
+/*
+ * Reasonably terse representation of the inode data.
+ */
+struct cramfs_inode {
+	__u32 mode:CRAMFS_MODE_WIDTH, uid:CRAMFS_UID_WIDTH;
+	/* SIZE for device files is i_rdev */
+	__u32 size:CRAMFS_SIZE_WIDTH, gid:CRAMFS_GID_WIDTH;
+	/* NAMELEN is the length of the file name, divided by 4 and
+           rounded up.  (cramfs doesn't support hard links.) */
+	/* OFFSET: For symlinks and non-empty regular files, this
+	   contains the offset (divided by 4) of the file data in
+	   compressed form (starting with an array of block pointers;
+	   see README).  For non-empty directories it is the offset
+	   (divided by 4) of the inode of the first file in that
+	   directory.  For anything else, offset is zero. */
+	__u32 namelen:CRAMFS_NAMELEN_WIDTH, offset:CRAMFS_OFFSET_WIDTH;
+};
+
+struct cramfs_info {
+	__u32 crc;
+	__u32 edition;
+	__u32 blocks;
+	__u32 files;
+};
+
+/*
+ * Superblock information at the beginning of the FS.
+ */
+struct cramfs_super {
+	__u32 magic;			/* 0x28cd3d45 - random number */
+	__u32 size;			/* length in bytes */
+	__u32 flags;			/* feature flags */
+	__u32 future;			/* reserved for future use */
+	__u8 signature[16];		/* "Compressed ROMFS" */
+	struct cramfs_info fsid;	/* unique filesystem info */
+	__u8 name[16];			/* user-defined name */
+	struct cramfs_inode root;	/* root inode data */
+};
+
+/*
+ * Feature flags
+ *
+ * 0x00000000 - 0x000000ff: features that work for all past kernels
+ * 0x00000100 - 0xffffffff: features that don't work for past kernels
+ */
+#define CRAMFS_FLAG_FSID_VERSION_2	0x00000001	/* fsid version #2 */
+#define CRAMFS_FLAG_SORTED_DIRS		0x00000002	/* sorted dirs */
+#define CRAMFS_FLAG_HOLES		0x00000100	/* support for holes */
+#define CRAMFS_FLAG_WRONG_SIGNATURE	0x00000200	/* reserved */
+#define CRAMFS_FLAG_SHIFTED_ROOT_OFFSET	0x00000400	/* shifted root fs */
+
+/*
+ * Valid values in super.flags.  Currently we refuse to mount
+ * if (flags & ~CRAMFS_SUPPORTED_FLAGS).  Maybe that should be
+ * changed to test super.future instead.
+ */
+#define CRAMFS_SUPPORTED_FLAGS	( 0x000000ff \
+				| CRAMFS_FLAG_HOLES \
+				| CRAMFS_FLAG_WRONG_SIGNATURE \
+				| CRAMFS_FLAG_SHIFTED_ROOT_OFFSET )
+
+#ifdef __KERNEL__
+/* Uncompression interfaces to the underlying zlib */
+int cramfs_uncompress_block(void *dst, int dstlen, void *src, int srclen);
+int cramfs_uncompress_init(void);
+void cramfs_uncompress_exit(void);
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/linux/cramfs_fs_sb.h b/include/linux/cramfs_fs_sb.h
new file mode 100644
index 00000000..83906935
--- /dev/null
+++ b/include/linux/cramfs_fs_sb.h
@@ -0,0 +1,20 @@
+#ifndef _CRAMFS_FS_SB
+#define _CRAMFS_FS_SB
+
+/*
+ * cramfs super-block data in memory
+ */
+struct cramfs_sb_info {
+			unsigned long magic;
+			unsigned long size;
+			unsigned long blocks;
+			unsigned long files;
+			unsigned long flags;
+};
+
+static inline struct cramfs_sb_info *CRAMFS_SB(struct super_block *sb)
+{
+	return sb->s_fs_info;
+}
+
+#endif
diff --git a/include/linux/crash_dump.h b/include/linux/crash_dump.h
new file mode 100644
index 00000000..37e4f8da
--- /dev/null
+++ b/include/linux/crash_dump.h
@@ -0,0 +1,80 @@
+#ifndef LINUX_CRASH_DUMP_H
+#define LINUX_CRASH_DUMP_H
+
+#ifdef CONFIG_CRASH_DUMP
+#include <linux/kexec.h>
+#include <linux/proc_fs.h>
+#include <linux/elf.h>
+
+#define ELFCORE_ADDR_MAX	(-1ULL)
+#define ELFCORE_ADDR_ERR	(-2ULL)
+
+extern unsigned long long elfcorehdr_addr;
+extern unsigned long long elfcorehdr_size;
+
+extern ssize_t copy_oldmem_page(unsigned long, char *, size_t,
+						unsigned long, int);
+
+/* Architecture code defines this if there are other possible ELF
+ * machine types, e.g. on bi-arch capable hardware. */
+#ifndef vmcore_elf_check_arch_cross
+#define vmcore_elf_check_arch_cross(x) 0
+#endif
+
+/*
+ * Architecture code can redefine this if there are any special checks
+ * needed for 64-bit ELF vmcores. In case of 32-bit only architecture,
+ * this can be set to zero.
+ */
+#ifndef vmcore_elf64_check_arch
+#define vmcore_elf64_check_arch(x) (elf_check_arch(x) || vmcore_elf_check_arch_cross(x))
+#endif
+
+/*
+ * is_kdump_kernel() checks whether this kernel is booting after a panic of
+ * previous kernel or not. This is determined by checking if previous kernel
+ * has passed the elf core header address on command line.
+ *
+ * This is not just a test if CONFIG_CRASH_DUMP is enabled or not. It will
+ * return 1 if CONFIG_CRASH_DUMP=y and if kernel is booting after a panic of
+ * previous kernel.
+ */
+
+static inline int is_kdump_kernel(void)
+{
+	return (elfcorehdr_addr != ELFCORE_ADDR_MAX) ? 1 : 0;
+}
+
+/* is_vmcore_usable() checks if the kernel is booting after a panic and
+ * the vmcore region is usable.
+ *
+ * This makes use of the fact that due to alignment -2ULL is not
+ * a valid pointer, much in the vain of IS_ERR(), except
+ * dealing directly with an unsigned long long rather than a pointer.
+ */
+
+static inline int is_vmcore_usable(void)
+{
+	return is_kdump_kernel() && elfcorehdr_addr != ELFCORE_ADDR_ERR ? 1 : 0;
+}
+
+/* vmcore_unusable() marks the vmcore as unusable,
+ * without disturbing the logic of is_kdump_kernel()
+ */
+
+static inline void vmcore_unusable(void)
+{
+	if (is_kdump_kernel())
+		elfcorehdr_addr = ELFCORE_ADDR_ERR;
+}
+
+#define HAVE_OLDMEM_PFN_IS_RAM 1
+extern int register_oldmem_pfn_is_ram(int (*fn)(unsigned long pfn));
+extern void unregister_oldmem_pfn_is_ram(void);
+
+#else /* !CONFIG_CRASH_DUMP */
+static inline int is_kdump_kernel(void) { return 0; }
+#endif /* CONFIG_CRASH_DUMP */
+
+extern unsigned long saved_max_pfn;
+#endif /* LINUX_CRASHDUMP_H */
diff --git a/include/linux/crc-ccitt.h b/include/linux/crc-ccitt.h
new file mode 100644
index 00000000..f52696a1
--- /dev/null
+++ b/include/linux/crc-ccitt.h
@@ -0,0 +1,15 @@
+#ifndef _LINUX_CRC_CCITT_H
+#define _LINUX_CRC_CCITT_H
+
+#include <linux/types.h>
+
+extern u16 const crc_ccitt_table[256];
+
+extern u16 crc_ccitt(u16 crc, const u8 *buffer, size_t len);
+
+static inline u16 crc_ccitt_byte(u16 crc, const u8 c)
+{
+	return (crc >> 8) ^ crc_ccitt_table[(crc ^ c) & 0xff];
+}
+
+#endif /* _LINUX_CRC_CCITT_H */
diff --git a/include/linux/crc-itu-t.h b/include/linux/crc-itu-t.h
new file mode 100644
index 00000000..84920f3c
--- /dev/null
+++ b/include/linux/crc-itu-t.h
@@ -0,0 +1,28 @@
+/*
+ *	crc-itu-t.h - CRC ITU-T V.41 routine
+ *
+ * Implements the standard CRC ITU-T V.41:
+ *   Width 16
+ *   Poly  0x0x1021 (x^16 + x^12 + x^15 + 1)
+ *   Init  0
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2. See the file COPYING for more details.
+ */
+
+#ifndef CRC_ITU_T_H
+#define CRC_ITU_T_H
+
+#include <linux/types.h>
+
+extern u16 const crc_itu_t_table[256];
+
+extern u16 crc_itu_t(u16 crc, const u8 *buffer, size_t len);
+
+static inline u16 crc_itu_t_byte(u16 crc, const u8 data)
+{
+	return (crc << 8) ^ crc_itu_t_table[((crc >> 8) ^ data) & 0xff];
+}
+
+#endif /* CRC_ITU_T_H */
+
diff --git a/include/linux/crc-t10dif.h b/include/linux/crc-t10dif.h
new file mode 100644
index 00000000..a9c96d86
--- /dev/null
+++ b/include/linux/crc-t10dif.h
@@ -0,0 +1,8 @@
+#ifndef _LINUX_CRC_T10DIF_H
+#define _LINUX_CRC_T10DIF_H
+
+#include <linux/types.h>
+
+__u16 crc_t10dif(unsigned char const *, size_t);
+
+#endif
diff --git a/include/linux/crc16.h b/include/linux/crc16.h
new file mode 100644
index 00000000..9443c084
--- /dev/null
+++ b/include/linux/crc16.h
@@ -0,0 +1,30 @@
+/*
+ *	crc16.h - CRC-16 routine
+ *
+ * Implements the standard CRC-16:
+ *   Width 16
+ *   Poly  0x8005 (x^16 + x^15 + x^2 + 1)
+ *   Init  0
+ *
+ * Copyright (c) 2005 Ben Gardner <bgardner@wabtec.com>
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2. See the file COPYING for more details.
+ */
+
+#ifndef __CRC16_H
+#define __CRC16_H
+
+#include <linux/types.h>
+
+extern u16 const crc16_table[256];
+
+extern u16 crc16(u16 crc, const u8 *buffer, size_t len);
+
+static inline u16 crc16_byte(u16 crc, const u8 data)
+{
+	return (crc >> 8) ^ crc16_table[(crc ^ data) & 0xff];
+}
+
+#endif /* __CRC16_H */
+
diff --git a/include/linux/crc32.h b/include/linux/crc32.h
new file mode 100644
index 00000000..68267b64
--- /dev/null
+++ b/include/linux/crc32.h
@@ -0,0 +1,29 @@
+/*
+ * crc32.h
+ * See linux/lib/crc32.c for license and changes
+ */
+#ifndef _LINUX_CRC32_H
+#define _LINUX_CRC32_H
+
+#include <linux/types.h>
+#include <linux/bitrev.h>
+
+extern u32  crc32_le(u32 crc, unsigned char const *p, size_t len);
+extern u32  crc32_be(u32 crc, unsigned char const *p, size_t len);
+
+extern u32  __crc32c_le(u32 crc, unsigned char const *p, size_t len);
+
+#define crc32(seed, data, length)  crc32_le(seed, (unsigned char const *)(data), length)
+
+/*
+ * Helpers for hash table generation of ethernet nics:
+ *
+ * Ethernet sends the least significant bit of a byte first, thus crc32_le
+ * is used. The output of crc32_le is bit reversed [most significant bit
+ * is in bit nr 0], thus it must be reversed before use. Except for
+ * nics that bit swap the result internally...
+ */
+#define ether_crc(length, data)    bitrev32(crc32_le(~0, data, length))
+#define ether_crc_le(length, data) crc32_le(~0, data, length)
+
+#endif /* _LINUX_CRC32_H */
diff --git a/include/linux/crc32c.h b/include/linux/crc32c.h
new file mode 100644
index 00000000..bd8b44d9
--- /dev/null
+++ b/include/linux/crc32c.h
@@ -0,0 +1,11 @@
+#ifndef _LINUX_CRC32C_H
+#define _LINUX_CRC32C_H
+
+#include <linux/types.h>
+
+extern u32 crc32c(u32 crc, const void *address, unsigned int length);
+
+/* This macro exists for backwards-compatibility. */
+#define crc32c_le crc32c
+
+#endif	/* _LINUX_CRC32C_H */
diff --git a/include/linux/crc7.h b/include/linux/crc7.h
new file mode 100644
index 00000000..1786e772
--- /dev/null
+++ b/include/linux/crc7.h
@@ -0,0 +1,14 @@
+#ifndef _LINUX_CRC7_H
+#define _LINUX_CRC7_H
+#include <linux/types.h>
+
+extern const u8 crc7_syndrome_table[256];
+
+static inline u8 crc7_byte(u8 crc, u8 data)
+{
+	return crc7_syndrome_table[(crc << 1) ^ data];
+}
+
+extern u8 crc7(u8 crc, const u8 *buffer, size_t len);
+
+#endif
diff --git a/include/linux/crc8.h b/include/linux/crc8.h
new file mode 100644
index 00000000..13c8dabb
--- /dev/null
+++ b/include/linux/crc8.h
@@ -0,0 +1,101 @@
+/*
+ * Copyright (c) 2011 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#ifndef __CRC8_H_
+#define __CRC8_H_
+
+#include <linux/types.h>
+
+/* see usage of this value in crc8() description */
+#define CRC8_INIT_VALUE		0xFF
+
+/*
+ * Return value of crc8() indicating valid message+crc. This is true
+ * if a CRC is inverted before transmission. The CRC computed over the
+ * whole received bitstream is _table[x], where x is the bit pattern
+ * of the modification (almost always 0xff).
+ */
+#define CRC8_GOOD_VALUE(_table)	(_table[0xFF])
+
+/* required table size for crc8 algorithm */
+#define CRC8_TABLE_SIZE			256
+
+/* helper macro assuring right table size is used */
+#define DECLARE_CRC8_TABLE(_table) \
+	static u8 _table[CRC8_TABLE_SIZE]
+
+/**
+ * crc8_populate_lsb - fill crc table for given polynomial in regular bit order.
+ *
+ * @table:	table to be filled.
+ * @polynomial:	polynomial for which table is to be filled.
+ *
+ * This function fills the provided table according the polynomial provided for
+ * regular bit order (lsb first). Polynomials in CRC algorithms are typically
+ * represented as shown below.
+ *
+ *	poly = x^8 + x^7 + x^6 + x^4 + x^2 + 1
+ *
+ * For lsb first direction x^7 maps to the lsb. So the polynomial is as below.
+ *
+ * - lsb first: poly = 10101011(1) = 0xAB
+ */
+void crc8_populate_lsb(u8 table[CRC8_TABLE_SIZE], u8 polynomial);
+
+/**
+ * crc8_populate_msb - fill crc table for given polynomial in reverse bit order.
+ *
+ * @table:	table to be filled.
+ * @polynomial:	polynomial for which table is to be filled.
+ *
+ * This function fills the provided table according the polynomial provided for
+ * reverse bit order (msb first). Polynomials in CRC algorithms are typically
+ * represented as shown below.
+ *
+ *	poly = x^8 + x^7 + x^6 + x^4 + x^2 + 1
+ *
+ * For msb first direction x^7 maps to the msb. So the polynomial is as below.
+ *
+ * - msb first: poly = (1)11010101 = 0xD5
+ */
+void crc8_populate_msb(u8 table[CRC8_TABLE_SIZE], u8 polynomial);
+
+/**
+ * crc8() - calculate a crc8 over the given input data.
+ *
+ * @table:	crc table used for calculation.
+ * @pdata:	pointer to data buffer.
+ * @nbytes:	number of bytes in data buffer.
+ * @crc:	previous returned crc8 value.
+ *
+ * The CRC8 is calculated using the polynomial given in crc8_populate_msb()
+ * or crc8_populate_lsb().
+ *
+ * The caller provides the initial value (either %CRC8_INIT_VALUE
+ * or the previous returned value) to allow for processing of
+ * discontiguous blocks of data.  When generating the CRC the
+ * caller is responsible for complementing the final return value
+ * and inserting it into the byte stream.  When validating a byte
+ * stream (including CRC8), a final return value of %CRC8_GOOD_VALUE
+ * indicates the byte stream data can be considered valid.
+ *
+ * Reference:
+ * "A Painless Guide to CRC Error Detection Algorithms", ver 3, Aug 1993
+ * Williams, Ross N., ross<at>ross.net
+ * (see URL http://www.ross.net/crc/download/crc_v3.txt).
+ */
+u8 crc8(const u8 table[CRC8_TABLE_SIZE], u8 *pdata, size_t nbytes, u8 crc);
+
+#endif /* __CRC8_H_ */
diff --git a/include/linux/cred.h b/include/linux/cred.h
new file mode 100644
index 00000000..adadf71a
--- /dev/null
+++ b/include/linux/cred.h
@@ -0,0 +1,394 @@
+/* Credentials management - see Documentation/security/credentials.txt
+ *
+ * Copyright (C) 2008 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_CRED_H
+#define _LINUX_CRED_H
+
+#include <linux/capability.h>
+#include <linux/init.h>
+#include <linux/key.h>
+#include <linux/selinux.h>
+#include <linux/atomic.h>
+
+struct user_struct;
+struct cred;
+struct inode;
+
+/*
+ * COW Supplementary groups list
+ */
+#define NGROUPS_SMALL		32
+#define NGROUPS_PER_BLOCK	((unsigned int)(PAGE_SIZE / sizeof(gid_t)))
+
+struct group_info {
+	atomic_t	usage;
+	int		ngroups;
+	int		nblocks;
+	gid_t		small_block[NGROUPS_SMALL];
+	gid_t		*blocks[0];
+};
+
+/**
+ * get_group_info - Get a reference to a group info structure
+ * @group_info: The group info to reference
+ *
+ * This gets a reference to a set of supplementary groups.
+ *
+ * If the caller is accessing a task's credentials, they must hold the RCU read
+ * lock when reading.
+ */
+static inline struct group_info *get_group_info(struct group_info *gi)
+{
+	atomic_inc(&gi->usage);
+	return gi;
+}
+
+/**
+ * put_group_info - Release a reference to a group info structure
+ * @group_info: The group info to release
+ */
+#define put_group_info(group_info)			\
+do {							\
+	if (atomic_dec_and_test(&(group_info)->usage))	\
+		groups_free(group_info);		\
+} while (0)
+
+extern struct group_info *groups_alloc(int);
+extern struct group_info init_groups;
+extern void groups_free(struct group_info *);
+extern int set_current_groups(struct group_info *);
+extern int set_groups(struct cred *, struct group_info *);
+extern int groups_search(const struct group_info *, gid_t);
+
+/* access the groups "array" with this macro */
+#define GROUP_AT(gi, i) \
+	((gi)->blocks[(i) / NGROUPS_PER_BLOCK][(i) % NGROUPS_PER_BLOCK])
+
+extern int in_group_p(gid_t);
+extern int in_egroup_p(gid_t);
+
+/*
+ * The common credentials for a thread group
+ * - shared by CLONE_THREAD
+ */
+#ifdef CONFIG_KEYS
+struct thread_group_cred {
+	atomic_t	usage;
+	pid_t		tgid;			/* thread group process ID */
+	spinlock_t	lock;
+	struct key __rcu *session_keyring;	/* keyring inherited over fork */
+	struct key	*process_keyring;	/* keyring private to this process */
+	struct rcu_head	rcu;			/* RCU deletion hook */
+};
+#endif
+
+/*
+ * The security context of a task
+ *
+ * The parts of the context break down into two categories:
+ *
+ *  (1) The objective context of a task.  These parts are used when some other
+ *	task is attempting to affect this one.
+ *
+ *  (2) The subjective context.  These details are used when the task is acting
+ *	upon another object, be that a file, a task, a key or whatever.
+ *
+ * Note that some members of this structure belong to both categories - the
+ * LSM security pointer for instance.
+ *
+ * A task has two security pointers.  task->real_cred points to the objective
+ * context that defines that task's actual details.  The objective part of this
+ * context is used whenever that task is acted upon.
+ *
+ * task->cred points to the subjective context that defines the details of how
+ * that task is going to act upon another object.  This may be overridden
+ * temporarily to point to another security context, but normally points to the
+ * same context as task->real_cred.
+ */
+struct cred {
+	atomic_t	usage;
+#ifdef CONFIG_DEBUG_CREDENTIALS
+	atomic_t	subscribers;	/* number of processes subscribed */
+	void		*put_addr;
+	unsigned	magic;
+#define CRED_MAGIC	0x43736564
+#define CRED_MAGIC_DEAD	0x44656144
+#endif
+	uid_t		uid;		/* real UID of the task */
+	gid_t		gid;		/* real GID of the task */
+	uid_t		suid;		/* saved UID of the task */
+	gid_t		sgid;		/* saved GID of the task */
+	uid_t		euid;		/* effective UID of the task */
+	gid_t		egid;		/* effective GID of the task */
+	uid_t		fsuid;		/* UID for VFS ops */
+	gid_t		fsgid;		/* GID for VFS ops */
+	unsigned	securebits;	/* SUID-less security management */
+	kernel_cap_t	cap_inheritable; /* caps our children can inherit */
+	kernel_cap_t	cap_permitted;	/* caps we're permitted */
+	kernel_cap_t	cap_effective;	/* caps we can actually use */
+	kernel_cap_t	cap_bset;	/* capability bounding set */
+#ifdef CONFIG_KEYS
+	unsigned char	jit_keyring;	/* default keyring to attach requested
+					 * keys to */
+	struct key	*thread_keyring; /* keyring private to this thread */
+	struct key	*request_key_auth; /* assumed request_key authority */
+	struct thread_group_cred *tgcred; /* thread-group shared credentials */
+#endif
+#ifdef CONFIG_SECURITY
+	void		*security;	/* subjective LSM security */
+#endif
+	struct user_struct *user;	/* real user ID subscription */
+	struct user_namespace *user_ns; /* cached user->user_ns */
+	struct group_info *group_info;	/* supplementary groups for euid/fsgid */
+	struct rcu_head	rcu;		/* RCU deletion hook */
+};
+
+extern void __put_cred(struct cred *);
+extern void exit_creds(struct task_struct *);
+extern int copy_creds(struct task_struct *, unsigned long);
+extern const struct cred *get_task_cred(struct task_struct *);
+extern struct cred *cred_alloc_blank(void);
+extern struct cred *prepare_creds(void);
+extern struct cred *prepare_exec_creds(void);
+extern int commit_creds(struct cred *);
+extern void abort_creds(struct cred *);
+extern const struct cred *override_creds(const struct cred *);
+extern void revert_creds(const struct cred *);
+extern struct cred *prepare_kernel_cred(struct task_struct *);
+extern int change_create_files_as(struct cred *, struct inode *);
+extern int set_security_override(struct cred *, u32);
+extern int set_security_override_from_ctx(struct cred *, const char *);
+extern int set_create_files_as(struct cred *, struct inode *);
+extern void __init cred_init(void);
+
+/*
+ * check for validity of credentials
+ */
+#ifdef CONFIG_DEBUG_CREDENTIALS
+extern void __invalid_creds(const struct cred *, const char *, unsigned);
+extern void __validate_process_creds(struct task_struct *,
+				     const char *, unsigned);
+
+extern bool creds_are_invalid(const struct cred *cred);
+
+static inline void __validate_creds(const struct cred *cred,
+				    const char *file, unsigned line)
+{
+	if (unlikely(creds_are_invalid(cred)))
+		__invalid_creds(cred, file, line);
+}
+
+#define validate_creds(cred)				\
+do {							\
+	__validate_creds((cred), __FILE__, __LINE__);	\
+} while(0)
+
+#define validate_process_creds()				\
+do {								\
+	__validate_process_creds(current, __FILE__, __LINE__);	\
+} while(0)
+
+extern void validate_creds_for_do_exit(struct task_struct *);
+#else
+static inline void validate_creds(const struct cred *cred)
+{
+}
+static inline void validate_creds_for_do_exit(struct task_struct *tsk)
+{
+}
+static inline void validate_process_creds(void)
+{
+}
+#endif
+
+/**
+ * get_new_cred - Get a reference on a new set of credentials
+ * @cred: The new credentials to reference
+ *
+ * Get a reference on the specified set of new credentials.  The caller must
+ * release the reference.
+ */
+static inline struct cred *get_new_cred(struct cred *cred)
+{
+	atomic_inc(&cred->usage);
+	return cred;
+}
+
+/**
+ * get_cred - Get a reference on a set of credentials
+ * @cred: The credentials to reference
+ *
+ * Get a reference on the specified set of credentials.  The caller must
+ * release the reference.
+ *
+ * This is used to deal with a committed set of credentials.  Although the
+ * pointer is const, this will temporarily discard the const and increment the
+ * usage count.  The purpose of this is to attempt to catch at compile time the
+ * accidental alteration of a set of credentials that should be considered
+ * immutable.
+ */
+static inline const struct cred *get_cred(const struct cred *cred)
+{
+	struct cred *nonconst_cred = (struct cred *) cred;
+	validate_creds(cred);
+	return get_new_cred(nonconst_cred);
+}
+
+/**
+ * put_cred - Release a reference to a set of credentials
+ * @cred: The credentials to release
+ *
+ * Release a reference to a set of credentials, deleting them when the last ref
+ * is released.
+ *
+ * This takes a const pointer to a set of credentials because the credentials
+ * on task_struct are attached by const pointers to prevent accidental
+ * alteration of otherwise immutable credential sets.
+ */
+static inline void put_cred(const struct cred *_cred)
+{
+	struct cred *cred = (struct cred *) _cred;
+
+	validate_creds(cred);
+	if (atomic_dec_and_test(&(cred)->usage))
+		__put_cred(cred);
+}
+
+/**
+ * current_cred - Access the current task's subjective credentials
+ *
+ * Access the subjective credentials of the current task.  RCU-safe,
+ * since nobody else can modify it.
+ */
+#define current_cred() \
+	rcu_dereference_protected(current->cred, 1)
+
+/**
+ * __task_cred - Access a task's objective credentials
+ * @task: The task to query
+ *
+ * Access the objective credentials of a task.  The caller must hold the RCU
+ * readlock or the task must be dead and unable to change its own credentials.
+ *
+ * The result of this function should not be passed directly to get_cred();
+ * rather get_task_cred() should be used instead.
+ */
+#define __task_cred(task)						\
+	({								\
+		const struct task_struct *__t = (task);			\
+		rcu_dereference_check(__t->real_cred,			\
+				      task_is_dead(__t));		\
+	})
+
+/**
+ * get_current_cred - Get the current task's subjective credentials
+ *
+ * Get the subjective credentials of the current task, pinning them so that
+ * they can't go away.  Accessing the current task's credentials directly is
+ * not permitted.
+ */
+#define get_current_cred()				\
+	(get_cred(current_cred()))
+
+/**
+ * get_current_user - Get the current task's user_struct
+ *
+ * Get the user record of the current task, pinning it so that it can't go
+ * away.
+ */
+#define get_current_user()				\
+({							\
+	struct user_struct *__u;			\
+	const struct cred *__cred;			\
+	__cred = current_cred();			\
+	__u = get_uid(__cred->user);			\
+	__u;						\
+})
+
+/**
+ * get_current_groups - Get the current task's supplementary group list
+ *
+ * Get the supplementary group list of the current task, pinning it so that it
+ * can't go away.
+ */
+#define get_current_groups()				\
+({							\
+	struct group_info *__groups;			\
+	const struct cred *__cred;			\
+	__cred = current_cred();			\
+	__groups = get_group_info(__cred->group_info);	\
+	__groups;					\
+})
+
+#define task_cred_xxx(task, xxx)			\
+({							\
+	__typeof__(((struct cred *)NULL)->xxx) ___val;	\
+	rcu_read_lock();				\
+	___val = __task_cred((task))->xxx;		\
+	rcu_read_unlock();				\
+	___val;						\
+})
+
+#define task_uid(task)		(task_cred_xxx((task), uid))
+#define task_euid(task)		(task_cred_xxx((task), euid))
+
+#define current_cred_xxx(xxx)			\
+({						\
+	current_cred()->xxx;			\
+})
+
+#define current_uid()		(current_cred_xxx(uid))
+#define current_gid()		(current_cred_xxx(gid))
+#define current_euid()		(current_cred_xxx(euid))
+#define current_egid()		(current_cred_xxx(egid))
+#define current_suid()		(current_cred_xxx(suid))
+#define current_sgid()		(current_cred_xxx(sgid))
+#define current_fsuid() 	(current_cred_xxx(fsuid))
+#define current_fsgid() 	(current_cred_xxx(fsgid))
+#define current_cap()		(current_cred_xxx(cap_effective))
+#define current_user()		(current_cred_xxx(user))
+#define current_security()	(current_cred_xxx(security))
+
+#ifdef CONFIG_USER_NS
+#define current_user_ns()	(current_cred_xxx(user_ns))
+#define task_user_ns(task)	(task_cred_xxx((task), user_ns))
+#else
+extern struct user_namespace init_user_ns;
+#define current_user_ns()	(&init_user_ns)
+#define task_user_ns(task)	(&init_user_ns)
+#endif
+
+
+#define current_uid_gid(_uid, _gid)		\
+do {						\
+	const struct cred *__cred;		\
+	__cred = current_cred();		\
+	*(_uid) = __cred->uid;			\
+	*(_gid) = __cred->gid;			\
+} while(0)
+
+#define current_euid_egid(_euid, _egid)		\
+do {						\
+	const struct cred *__cred;		\
+	__cred = current_cred();		\
+	*(_euid) = __cred->euid;		\
+	*(_egid) = __cred->egid;		\
+} while(0)
+
+#define current_fsuid_fsgid(_fsuid, _fsgid)	\
+do {						\
+	const struct cred *__cred;		\
+	__cred = current_cred();		\
+	*(_fsuid) = __cred->fsuid;		\
+	*(_fsgid) = __cred->fsgid;		\
+} while(0)
+
+#endif /* _LINUX_CRED_H */
diff --git a/include/linux/crush/crush.h b/include/linux/crush/crush.h
new file mode 100644
index 00000000..97e435b1
--- /dev/null
+++ b/include/linux/crush/crush.h
@@ -0,0 +1,180 @@
+#ifndef CEPH_CRUSH_CRUSH_H
+#define CEPH_CRUSH_CRUSH_H
+
+#include <linux/types.h>
+
+/*
+ * CRUSH is a pseudo-random data distribution algorithm that
+ * efficiently distributes input values (typically, data objects)
+ * across a heterogeneous, structured storage cluster.
+ *
+ * The algorithm was originally described in detail in this paper
+ * (although the algorithm has evolved somewhat since then):
+ *
+ *     http://www.ssrc.ucsc.edu/Papers/weil-sc06.pdf
+ *
+ * LGPL2
+ */
+
+
+#define CRUSH_MAGIC 0x00010000ul   /* for detecting algorithm revisions */
+
+
+#define CRUSH_MAX_DEPTH 10  /* max crush hierarchy depth */
+#define CRUSH_MAX_SET   10  /* max size of a mapping result */
+
+
+/*
+ * CRUSH uses user-defined "rules" to describe how inputs should be
+ * mapped to devices.  A rule consists of sequence of steps to perform
+ * to generate the set of output devices.
+ */
+struct crush_rule_step {
+	__u32 op;
+	__s32 arg1;
+	__s32 arg2;
+};
+
+/* step op codes */
+enum {
+	CRUSH_RULE_NOOP = 0,
+	CRUSH_RULE_TAKE = 1,          /* arg1 = value to start with */
+	CRUSH_RULE_CHOOSE_FIRSTN = 2, /* arg1 = num items to pick */
+				      /* arg2 = type */
+	CRUSH_RULE_CHOOSE_INDEP = 3,  /* same */
+	CRUSH_RULE_EMIT = 4,          /* no args */
+	CRUSH_RULE_CHOOSE_LEAF_FIRSTN = 6,
+	CRUSH_RULE_CHOOSE_LEAF_INDEP = 7,
+};
+
+/*
+ * for specifying choose num (arg1) relative to the max parameter
+ * passed to do_rule
+ */
+#define CRUSH_CHOOSE_N            0
+#define CRUSH_CHOOSE_N_MINUS(x)   (-(x))
+
+/*
+ * The rule mask is used to describe what the rule is intended for.
+ * Given a ruleset and size of output set, we search through the
+ * rule list for a matching rule_mask.
+ */
+struct crush_rule_mask {
+	__u8 ruleset;
+	__u8 type;
+	__u8 min_size;
+	__u8 max_size;
+};
+
+struct crush_rule {
+	__u32 len;
+	struct crush_rule_mask mask;
+	struct crush_rule_step steps[0];
+};
+
+#define crush_rule_size(len) (sizeof(struct crush_rule) + \
+			      (len)*sizeof(struct crush_rule_step))
+
+
+
+/*
+ * A bucket is a named container of other items (either devices or
+ * other buckets).  Items within a bucket are chosen using one of a
+ * few different algorithms.  The table summarizes how the speed of
+ * each option measures up against mapping stability when items are
+ * added or removed.
+ *
+ *  Bucket Alg     Speed       Additions    Removals
+ *  ------------------------------------------------
+ *  uniform         O(1)       poor         poor
+ *  list            O(n)       optimal      poor
+ *  tree            O(log n)   good         good
+ *  straw           O(n)       optimal      optimal
+ */
+enum {
+	CRUSH_BUCKET_UNIFORM = 1,
+	CRUSH_BUCKET_LIST = 2,
+	CRUSH_BUCKET_TREE = 3,
+	CRUSH_BUCKET_STRAW = 4
+};
+extern const char *crush_bucket_alg_name(int alg);
+
+struct crush_bucket {
+	__s32 id;        /* this'll be negative */
+	__u16 type;      /* non-zero; type=0 is reserved for devices */
+	__u8 alg;        /* one of CRUSH_BUCKET_* */
+	__u8 hash;       /* which hash function to use, CRUSH_HASH_* */
+	__u32 weight;    /* 16-bit fixed point */
+	__u32 size;      /* num items */
+	__s32 *items;
+
+	/*
+	 * cached random permutation: used for uniform bucket and for
+	 * the linear search fallback for the other bucket types.
+	 */
+	__u32 perm_x;  /* @x for which *perm is defined */
+	__u32 perm_n;  /* num elements of *perm that are permuted/defined */
+	__u32 *perm;
+};
+
+struct crush_bucket_uniform {
+	struct crush_bucket h;
+	__u32 item_weight;  /* 16-bit fixed point; all items equally weighted */
+};
+
+struct crush_bucket_list {
+	struct crush_bucket h;
+	__u32 *item_weights;  /* 16-bit fixed point */
+	__u32 *sum_weights;   /* 16-bit fixed point.  element i is sum
+				 of weights 0..i, inclusive */
+};
+
+struct crush_bucket_tree {
+	struct crush_bucket h;  /* note: h.size is _tree_ size, not number of
+				   actual items */
+	__u8 num_nodes;
+	__u32 *node_weights;
+};
+
+struct crush_bucket_straw {
+	struct crush_bucket h;
+	__u32 *item_weights;   /* 16-bit fixed point */
+	__u32 *straws;         /* 16-bit fixed point */
+};
+
+
+
+/*
+ * CRUSH map includes all buckets, rules, etc.
+ */
+struct crush_map {
+	struct crush_bucket **buckets;
+	struct crush_rule **rules;
+
+	/*
+	 * Parent pointers to identify the parent bucket a device or
+	 * bucket in the hierarchy.  If an item appears more than
+	 * once, this is the _last_ time it appeared (where buckets
+	 * are processed in bucket id order, from -1 on down to
+	 * -max_buckets.
+	 */
+	__u32 *bucket_parents;
+	__u32 *device_parents;
+
+	__s32 max_buckets;
+	__u32 max_rules;
+	__s32 max_devices;
+};
+
+
+/* crush.c */
+extern int crush_get_bucket_item_weight(struct crush_bucket *b, int pos);
+extern void crush_calc_parents(struct crush_map *map);
+extern void crush_destroy_bucket_uniform(struct crush_bucket_uniform *b);
+extern void crush_destroy_bucket_list(struct crush_bucket_list *b);
+extern void crush_destroy_bucket_tree(struct crush_bucket_tree *b);
+extern void crush_destroy_bucket_straw(struct crush_bucket_straw *b);
+extern void crush_destroy_bucket(struct crush_bucket *b);
+extern void crush_destroy(struct crush_map *map);
+
+#endif
diff --git a/include/linux/crush/hash.h b/include/linux/crush/hash.h
new file mode 100644
index 00000000..91e88423
--- /dev/null
+++ b/include/linux/crush/hash.h
@@ -0,0 +1,17 @@
+#ifndef CEPH_CRUSH_HASH_H
+#define CEPH_CRUSH_HASH_H
+
+#define CRUSH_HASH_RJENKINS1   0
+
+#define CRUSH_HASH_DEFAULT CRUSH_HASH_RJENKINS1
+
+extern const char *crush_hash_name(int type);
+
+extern __u32 crush_hash32(int type, __u32 a);
+extern __u32 crush_hash32_2(int type, __u32 a, __u32 b);
+extern __u32 crush_hash32_3(int type, __u32 a, __u32 b, __u32 c);
+extern __u32 crush_hash32_4(int type, __u32 a, __u32 b, __u32 c, __u32 d);
+extern __u32 crush_hash32_5(int type, __u32 a, __u32 b, __u32 c, __u32 d,
+			    __u32 e);
+
+#endif
diff --git a/include/linux/crush/mapper.h b/include/linux/crush/mapper.h
new file mode 100644
index 00000000..c46b99c1
--- /dev/null
+++ b/include/linux/crush/mapper.h
@@ -0,0 +1,20 @@
+#ifndef CEPH_CRUSH_MAPPER_H
+#define CEPH_CRUSH_MAPPER_H
+
+/*
+ * CRUSH functions for find rules and then mapping an input to an
+ * output set.
+ *
+ * LGPL2
+ */
+
+#include "crush.h"
+
+extern int crush_find_rule(struct crush_map *map, int pool, int type, int size);
+extern int crush_do_rule(struct crush_map *map,
+			 int ruleno,
+			 int x, int *result, int result_max,
+			 int forcefeed,    /* -1 for none */
+			 __u32 *weights);
+
+#endif
diff --git a/include/linux/crypto.h b/include/linux/crypto.h
new file mode 100644
index 00000000..b92eadf9
--- /dev/null
+++ b/include/linux/crypto.h
@@ -0,0 +1,1287 @@
+/*
+ * Scatterlist Cryptographic API.
+ *
+ * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
+ * Copyright (c) 2002 David S. Miller (davem@redhat.com)
+ * Copyright (c) 2005 Herbert Xu <herbert@gondor.apana.org.au>
+ *
+ * Portions derived from Cryptoapi, by Alexander Kjeldaas <astor@fast.no>
+ * and Nettle, by Niels Möller.
+ * 
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option) 
+ * any later version.
+ *
+ */
+#ifndef _LINUX_CRYPTO_H
+#define _LINUX_CRYPTO_H
+
+#include <linux/atomic.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/bug.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/uaccess.h>
+
+/*
+ * Algorithm masks and types.
+ */
+#define CRYPTO_ALG_TYPE_MASK		0x0000000f
+#define CRYPTO_ALG_TYPE_CIPHER		0x00000001
+#define CRYPTO_ALG_TYPE_COMPRESS	0x00000002
+#define CRYPTO_ALG_TYPE_AEAD		0x00000003
+#define CRYPTO_ALG_TYPE_BLKCIPHER	0x00000004
+#define CRYPTO_ALG_TYPE_ABLKCIPHER	0x00000005
+#define CRYPTO_ALG_TYPE_GIVCIPHER	0x00000006
+#define CRYPTO_ALG_TYPE_DIGEST		0x00000008
+#define CRYPTO_ALG_TYPE_HASH		0x00000008
+#define CRYPTO_ALG_TYPE_SHASH		0x00000009
+#define CRYPTO_ALG_TYPE_AHASH		0x0000000a
+#define CRYPTO_ALG_TYPE_RNG		0x0000000c
+#define CRYPTO_ALG_TYPE_PCOMPRESS	0x0000000f
+
+#define CRYPTO_ALG_TYPE_HASH_MASK	0x0000000e
+#define CRYPTO_ALG_TYPE_AHASH_MASK	0x0000000c
+#define CRYPTO_ALG_TYPE_BLKCIPHER_MASK	0x0000000c
+
+#define CRYPTO_ALG_LARVAL		0x00000010
+#define CRYPTO_ALG_DEAD			0x00000020
+#define CRYPTO_ALG_DYING		0x00000040
+#define CRYPTO_ALG_ASYNC		0x00000080
+
+/*
+ * Set this bit if and only if the algorithm requires another algorithm of
+ * the same type to handle corner cases.
+ */
+#define CRYPTO_ALG_NEED_FALLBACK	0x00000100
+
+/*
+ * This bit is set for symmetric key ciphers that have already been wrapped
+ * with a generic IV generator to prevent them from being wrapped again.
+ */
+#define CRYPTO_ALG_GENIV		0x00000200
+
+/*
+ * Set if the algorithm has passed automated run-time testing.  Note that
+ * if there is no run-time testing for a given algorithm it is considered
+ * to have passed.
+ */
+
+#define CRYPTO_ALG_TESTED		0x00000400
+
+/*
+ * Set if the algorithm is an instance that is build from templates.
+ */
+#define CRYPTO_ALG_INSTANCE		0x00000800
+
+/* Set this bit if the algorithm provided is hardware accelerated but
+ * not available to userspace via instruction set or so.
+ */
+#define CRYPTO_ALG_KERN_DRIVER_ONLY	0x00001000
+
+/*
+ * Transform masks and values (for crt_flags).
+ */
+#define CRYPTO_TFM_REQ_MASK		0x000fff00
+#define CRYPTO_TFM_RES_MASK		0xfff00000
+
+#define CRYPTO_TFM_REQ_WEAK_KEY		0x00000100
+#define CRYPTO_TFM_REQ_MAY_SLEEP	0x00000200
+#define CRYPTO_TFM_REQ_MAY_BACKLOG	0x00000400
+#define CRYPTO_TFM_RES_WEAK_KEY		0x00100000
+#define CRYPTO_TFM_RES_BAD_KEY_LEN   	0x00200000
+#define CRYPTO_TFM_RES_BAD_KEY_SCHED 	0x00400000
+#define CRYPTO_TFM_RES_BAD_BLOCK_LEN 	0x00800000
+#define CRYPTO_TFM_RES_BAD_FLAGS 	0x01000000
+
+/*
+ * Miscellaneous stuff.
+ */
+#define CRYPTO_MAX_ALG_NAME		64
+
+/*
+ * The macro CRYPTO_MINALIGN_ATTR (along with the void * type in the actual
+ * declaration) is used to ensure that the crypto_tfm context structure is
+ * aligned correctly for the given architecture so that there are no alignment
+ * faults for C data types.  In particular, this is required on platforms such
+ * as arm where pointers are 32-bit aligned but there are data types such as
+ * u64 which require 64-bit alignment.
+ */
+#define CRYPTO_MINALIGN ARCH_KMALLOC_MINALIGN
+
+#define CRYPTO_MINALIGN_ATTR __attribute__ ((__aligned__(CRYPTO_MINALIGN)))
+
+struct scatterlist;
+struct crypto_ablkcipher;
+struct crypto_async_request;
+struct crypto_aead;
+struct crypto_blkcipher;
+struct crypto_hash;
+struct crypto_rng;
+struct crypto_tfm;
+struct crypto_type;
+struct aead_givcrypt_request;
+struct skcipher_givcrypt_request;
+
+typedef void (*crypto_completion_t)(struct crypto_async_request *req, int err);
+
+struct crypto_async_request {
+	struct list_head list;
+	crypto_completion_t complete;
+	void *data;
+	struct crypto_tfm *tfm;
+
+	u32 flags;
+};
+
+struct ablkcipher_request {
+	struct crypto_async_request base;
+
+	unsigned int nbytes;
+
+	void *info;
+
+	struct scatterlist *src;
+	struct scatterlist *dst;
+
+	void *__ctx[] CRYPTO_MINALIGN_ATTR;
+};
+
+/**
+ *	struct aead_request - AEAD request
+ *	@base: Common attributes for async crypto requests
+ *	@assoclen: Length in bytes of associated data for authentication
+ *	@cryptlen: Length of data to be encrypted or decrypted
+ *	@iv: Initialisation vector
+ *	@assoc: Associated data
+ *	@src: Source data
+ *	@dst: Destination data
+ *	@__ctx: Start of private context data
+ */
+struct aead_request {
+	struct crypto_async_request base;
+
+	unsigned int assoclen;
+	unsigned int cryptlen;
+
+	u8 *iv;
+
+	struct scatterlist *assoc;
+	struct scatterlist *src;
+	struct scatterlist *dst;
+
+	void *__ctx[] CRYPTO_MINALIGN_ATTR;
+};
+
+struct blkcipher_desc {
+	struct crypto_blkcipher *tfm;
+	void *info;
+	u32 flags;
+};
+
+struct cipher_desc {
+	struct crypto_tfm *tfm;
+	void (*crfn)(struct crypto_tfm *tfm, u8 *dst, const u8 *src);
+	unsigned int (*prfn)(const struct cipher_desc *desc, u8 *dst,
+			     const u8 *src, unsigned int nbytes);
+	void *info;
+};
+
+struct hash_desc {
+	struct crypto_hash *tfm;
+	u32 flags;
+};
+
+/*
+ * Algorithms: modular crypto algorithm implementations, managed
+ * via crypto_register_alg() and crypto_unregister_alg().
+ */
+struct ablkcipher_alg {
+	int (*setkey)(struct crypto_ablkcipher *tfm, const u8 *key,
+	              unsigned int keylen);
+	int (*encrypt)(struct ablkcipher_request *req);
+	int (*decrypt)(struct ablkcipher_request *req);
+	int (*givencrypt)(struct skcipher_givcrypt_request *req);
+	int (*givdecrypt)(struct skcipher_givcrypt_request *req);
+
+	const char *geniv;
+
+	unsigned int min_keysize;
+	unsigned int max_keysize;
+	unsigned int ivsize;
+};
+
+struct aead_alg {
+	int (*setkey)(struct crypto_aead *tfm, const u8 *key,
+	              unsigned int keylen);
+	int (*setauthsize)(struct crypto_aead *tfm, unsigned int authsize);
+	int (*encrypt)(struct aead_request *req);
+	int (*decrypt)(struct aead_request *req);
+	int (*givencrypt)(struct aead_givcrypt_request *req);
+	int (*givdecrypt)(struct aead_givcrypt_request *req);
+
+	const char *geniv;
+
+	unsigned int ivsize;
+	unsigned int maxauthsize;
+};
+
+struct blkcipher_alg {
+	int (*setkey)(struct crypto_tfm *tfm, const u8 *key,
+	              unsigned int keylen);
+	int (*encrypt)(struct blkcipher_desc *desc,
+		       struct scatterlist *dst, struct scatterlist *src,
+		       unsigned int nbytes);
+	int (*decrypt)(struct blkcipher_desc *desc,
+		       struct scatterlist *dst, struct scatterlist *src,
+		       unsigned int nbytes);
+
+	const char *geniv;
+
+	unsigned int min_keysize;
+	unsigned int max_keysize;
+	unsigned int ivsize;
+};
+
+struct cipher_alg {
+	unsigned int cia_min_keysize;
+	unsigned int cia_max_keysize;
+	int (*cia_setkey)(struct crypto_tfm *tfm, const u8 *key,
+	                  unsigned int keylen);
+	void (*cia_encrypt)(struct crypto_tfm *tfm, u8 *dst, const u8 *src);
+	void (*cia_decrypt)(struct crypto_tfm *tfm, u8 *dst, const u8 *src);
+};
+
+struct compress_alg {
+	int (*coa_compress)(struct crypto_tfm *tfm, const u8 *src,
+			    unsigned int slen, u8 *dst, unsigned int *dlen);
+	int (*coa_decompress)(struct crypto_tfm *tfm, const u8 *src,
+			      unsigned int slen, u8 *dst, unsigned int *dlen);
+};
+
+struct rng_alg {
+	int (*rng_make_random)(struct crypto_rng *tfm, u8 *rdata,
+			       unsigned int dlen);
+	int (*rng_reset)(struct crypto_rng *tfm, u8 *seed, unsigned int slen);
+
+	unsigned int seedsize;
+};
+
+
+#define cra_ablkcipher	cra_u.ablkcipher
+#define cra_aead	cra_u.aead
+#define cra_blkcipher	cra_u.blkcipher
+#define cra_cipher	cra_u.cipher
+#define cra_compress	cra_u.compress
+#define cra_rng		cra_u.rng
+
+struct crypto_alg {
+	struct list_head cra_list;
+	struct list_head cra_users;
+
+	u32 cra_flags;
+	unsigned int cra_blocksize;
+	unsigned int cra_ctxsize;
+	unsigned int cra_alignmask;
+
+	int cra_priority;
+	atomic_t cra_refcnt;
+
+	char cra_name[CRYPTO_MAX_ALG_NAME];
+	char cra_driver_name[CRYPTO_MAX_ALG_NAME];
+
+	const struct crypto_type *cra_type;
+
+	union {
+		struct ablkcipher_alg ablkcipher;
+		struct aead_alg aead;
+		struct blkcipher_alg blkcipher;
+		struct cipher_alg cipher;
+		struct compress_alg compress;
+		struct rng_alg rng;
+	} cra_u;
+
+	int (*cra_init)(struct crypto_tfm *tfm);
+	void (*cra_exit)(struct crypto_tfm *tfm);
+	void (*cra_destroy)(struct crypto_alg *alg);
+	
+	struct module *cra_module;
+};
+
+/*
+ * Algorithm registration interface.
+ */
+int crypto_register_alg(struct crypto_alg *alg);
+int crypto_unregister_alg(struct crypto_alg *alg);
+int crypto_register_algs(struct crypto_alg *algs, int count);
+int crypto_unregister_algs(struct crypto_alg *algs, int count);
+
+/*
+ * Algorithm query interface.
+ */
+int crypto_has_alg(const char *name, u32 type, u32 mask);
+
+/*
+ * Transforms: user-instantiated objects which encapsulate algorithms
+ * and core processing logic.  Managed via crypto_alloc_*() and
+ * crypto_free_*(), as well as the various helpers below.
+ */
+
+struct ablkcipher_tfm {
+	int (*setkey)(struct crypto_ablkcipher *tfm, const u8 *key,
+	              unsigned int keylen);
+	int (*encrypt)(struct ablkcipher_request *req);
+	int (*decrypt)(struct ablkcipher_request *req);
+	int (*givencrypt)(struct skcipher_givcrypt_request *req);
+	int (*givdecrypt)(struct skcipher_givcrypt_request *req);
+
+	struct crypto_ablkcipher *base;
+
+	unsigned int ivsize;
+	unsigned int reqsize;
+};
+
+struct aead_tfm {
+	int (*setkey)(struct crypto_aead *tfm, const u8 *key,
+	              unsigned int keylen);
+	int (*encrypt)(struct aead_request *req);
+	int (*decrypt)(struct aead_request *req);
+	int (*givencrypt)(struct aead_givcrypt_request *req);
+	int (*givdecrypt)(struct aead_givcrypt_request *req);
+
+	struct crypto_aead *base;
+
+	unsigned int ivsize;
+	unsigned int authsize;
+	unsigned int reqsize;
+};
+
+struct blkcipher_tfm {
+	void *iv;
+	int (*setkey)(struct crypto_tfm *tfm, const u8 *key,
+		      unsigned int keylen);
+	int (*encrypt)(struct blkcipher_desc *desc, struct scatterlist *dst,
+		       struct scatterlist *src, unsigned int nbytes);
+	int (*decrypt)(struct blkcipher_desc *desc, struct scatterlist *dst,
+		       struct scatterlist *src, unsigned int nbytes);
+};
+
+struct cipher_tfm {
+	int (*cit_setkey)(struct crypto_tfm *tfm,
+	                  const u8 *key, unsigned int keylen);
+	void (*cit_encrypt_one)(struct crypto_tfm *tfm, u8 *dst, const u8 *src);
+	void (*cit_decrypt_one)(struct crypto_tfm *tfm, u8 *dst, const u8 *src);
+};
+
+struct hash_tfm {
+	int (*init)(struct hash_desc *desc);
+	int (*update)(struct hash_desc *desc,
+		      struct scatterlist *sg, unsigned int nsg);
+	int (*final)(struct hash_desc *desc, u8 *out);
+	int (*digest)(struct hash_desc *desc, struct scatterlist *sg,
+		      unsigned int nsg, u8 *out);
+	int (*setkey)(struct crypto_hash *tfm, const u8 *key,
+		      unsigned int keylen);
+	unsigned int digestsize;
+};
+
+struct compress_tfm {
+	int (*cot_compress)(struct crypto_tfm *tfm,
+	                    const u8 *src, unsigned int slen,
+	                    u8 *dst, unsigned int *dlen);
+	int (*cot_decompress)(struct crypto_tfm *tfm,
+	                      const u8 *src, unsigned int slen,
+	                      u8 *dst, unsigned int *dlen);
+};
+
+struct rng_tfm {
+	int (*rng_gen_random)(struct crypto_rng *tfm, u8 *rdata,
+			      unsigned int dlen);
+	int (*rng_reset)(struct crypto_rng *tfm, u8 *seed, unsigned int slen);
+};
+
+#define crt_ablkcipher	crt_u.ablkcipher
+#define crt_aead	crt_u.aead
+#define crt_blkcipher	crt_u.blkcipher
+#define crt_cipher	crt_u.cipher
+#define crt_hash	crt_u.hash
+#define crt_compress	crt_u.compress
+#define crt_rng		crt_u.rng
+
+struct crypto_tfm {
+
+	u32 crt_flags;
+	
+	union {
+		struct ablkcipher_tfm ablkcipher;
+		struct aead_tfm aead;
+		struct blkcipher_tfm blkcipher;
+		struct cipher_tfm cipher;
+		struct hash_tfm hash;
+		struct compress_tfm compress;
+		struct rng_tfm rng;
+	} crt_u;
+
+	void (*exit)(struct crypto_tfm *tfm);
+	
+	struct crypto_alg *__crt_alg;
+
+	void *__crt_ctx[] CRYPTO_MINALIGN_ATTR;
+};
+
+struct crypto_ablkcipher {
+	struct crypto_tfm base;
+};
+
+struct crypto_aead {
+	struct crypto_tfm base;
+};
+
+struct crypto_blkcipher {
+	struct crypto_tfm base;
+};
+
+struct crypto_cipher {
+	struct crypto_tfm base;
+};
+
+struct crypto_comp {
+	struct crypto_tfm base;
+};
+
+struct crypto_hash {
+	struct crypto_tfm base;
+};
+
+struct crypto_rng {
+	struct crypto_tfm base;
+};
+
+enum {
+	CRYPTOA_UNSPEC,
+	CRYPTOA_ALG,
+	CRYPTOA_TYPE,
+	CRYPTOA_U32,
+	__CRYPTOA_MAX,
+};
+
+#define CRYPTOA_MAX (__CRYPTOA_MAX - 1)
+
+/* Maximum number of (rtattr) parameters for each template. */
+#define CRYPTO_MAX_ATTRS 32
+
+struct crypto_attr_alg {
+	char name[CRYPTO_MAX_ALG_NAME];
+};
+
+struct crypto_attr_type {
+	u32 type;
+	u32 mask;
+};
+
+struct crypto_attr_u32 {
+	u32 num;
+};
+
+/* 
+ * Transform user interface.
+ */
+ 
+struct crypto_tfm *crypto_alloc_base(const char *alg_name, u32 type, u32 mask);
+void crypto_destroy_tfm(void *mem, struct crypto_tfm *tfm);
+
+static inline void crypto_free_tfm(struct crypto_tfm *tfm)
+{
+	return crypto_destroy_tfm(tfm, tfm);
+}
+
+int alg_test(const char *driver, const char *alg, u32 type, u32 mask);
+
+/*
+ * Transform helpers which query the underlying algorithm.
+ */
+static inline const char *crypto_tfm_alg_name(struct crypto_tfm *tfm)
+{
+	return tfm->__crt_alg->cra_name;
+}
+
+static inline const char *crypto_tfm_alg_driver_name(struct crypto_tfm *tfm)
+{
+	return tfm->__crt_alg->cra_driver_name;
+}
+
+static inline int crypto_tfm_alg_priority(struct crypto_tfm *tfm)
+{
+	return tfm->__crt_alg->cra_priority;
+}
+
+static inline u32 crypto_tfm_alg_type(struct crypto_tfm *tfm)
+{
+	return tfm->__crt_alg->cra_flags & CRYPTO_ALG_TYPE_MASK;
+}
+
+static inline unsigned int crypto_tfm_alg_blocksize(struct crypto_tfm *tfm)
+{
+	return tfm->__crt_alg->cra_blocksize;
+}
+
+static inline unsigned int crypto_tfm_alg_alignmask(struct crypto_tfm *tfm)
+{
+	return tfm->__crt_alg->cra_alignmask;
+}
+
+static inline u32 crypto_tfm_get_flags(struct crypto_tfm *tfm)
+{
+	return tfm->crt_flags;
+}
+
+static inline void crypto_tfm_set_flags(struct crypto_tfm *tfm, u32 flags)
+{
+	tfm->crt_flags |= flags;
+}
+
+static inline void crypto_tfm_clear_flags(struct crypto_tfm *tfm, u32 flags)
+{
+	tfm->crt_flags &= ~flags;
+}
+
+static inline void *crypto_tfm_ctx(struct crypto_tfm *tfm)
+{
+	return tfm->__crt_ctx;
+}
+
+static inline unsigned int crypto_tfm_ctx_alignment(void)
+{
+	struct crypto_tfm *tfm;
+	return __alignof__(tfm->__crt_ctx);
+}
+
+/*
+ * API wrappers.
+ */
+static inline struct crypto_ablkcipher *__crypto_ablkcipher_cast(
+	struct crypto_tfm *tfm)
+{
+	return (struct crypto_ablkcipher *)tfm;
+}
+
+static inline u32 crypto_skcipher_type(u32 type)
+{
+	type &= ~(CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_GENIV);
+	type |= CRYPTO_ALG_TYPE_BLKCIPHER;
+	return type;
+}
+
+static inline u32 crypto_skcipher_mask(u32 mask)
+{
+	mask &= ~(CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_GENIV);
+	mask |= CRYPTO_ALG_TYPE_BLKCIPHER_MASK;
+	return mask;
+}
+
+struct crypto_ablkcipher *crypto_alloc_ablkcipher(const char *alg_name,
+						  u32 type, u32 mask);
+
+static inline struct crypto_tfm *crypto_ablkcipher_tfm(
+	struct crypto_ablkcipher *tfm)
+{
+	return &tfm->base;
+}
+
+static inline void crypto_free_ablkcipher(struct crypto_ablkcipher *tfm)
+{
+	crypto_free_tfm(crypto_ablkcipher_tfm(tfm));
+}
+
+static inline int crypto_has_ablkcipher(const char *alg_name, u32 type,
+					u32 mask)
+{
+	return crypto_has_alg(alg_name, crypto_skcipher_type(type),
+			      crypto_skcipher_mask(mask));
+}
+
+static inline struct ablkcipher_tfm *crypto_ablkcipher_crt(
+	struct crypto_ablkcipher *tfm)
+{
+	return &crypto_ablkcipher_tfm(tfm)->crt_ablkcipher;
+}
+
+static inline unsigned int crypto_ablkcipher_ivsize(
+	struct crypto_ablkcipher *tfm)
+{
+	return crypto_ablkcipher_crt(tfm)->ivsize;
+}
+
+static inline unsigned int crypto_ablkcipher_blocksize(
+	struct crypto_ablkcipher *tfm)
+{
+	return crypto_tfm_alg_blocksize(crypto_ablkcipher_tfm(tfm));
+}
+
+static inline unsigned int crypto_ablkcipher_alignmask(
+	struct crypto_ablkcipher *tfm)
+{
+	return crypto_tfm_alg_alignmask(crypto_ablkcipher_tfm(tfm));
+}
+
+static inline u32 crypto_ablkcipher_get_flags(struct crypto_ablkcipher *tfm)
+{
+	return crypto_tfm_get_flags(crypto_ablkcipher_tfm(tfm));
+}
+
+static inline void crypto_ablkcipher_set_flags(struct crypto_ablkcipher *tfm,
+					       u32 flags)
+{
+	crypto_tfm_set_flags(crypto_ablkcipher_tfm(tfm), flags);
+}
+
+static inline void crypto_ablkcipher_clear_flags(struct crypto_ablkcipher *tfm,
+						 u32 flags)
+{
+	crypto_tfm_clear_flags(crypto_ablkcipher_tfm(tfm), flags);
+}
+
+static inline int crypto_ablkcipher_setkey(struct crypto_ablkcipher *tfm,
+					   const u8 *key, unsigned int keylen)
+{
+	struct ablkcipher_tfm *crt = crypto_ablkcipher_crt(tfm);
+
+	return crt->setkey(crt->base, key, keylen);
+}
+
+static inline struct crypto_ablkcipher *crypto_ablkcipher_reqtfm(
+	struct ablkcipher_request *req)
+{
+	return __crypto_ablkcipher_cast(req->base.tfm);
+}
+
+static inline int crypto_ablkcipher_encrypt(struct ablkcipher_request *req)
+{
+	struct ablkcipher_tfm *crt =
+		crypto_ablkcipher_crt(crypto_ablkcipher_reqtfm(req));
+	return crt->encrypt(req);
+}
+
+static inline int crypto_ablkcipher_decrypt(struct ablkcipher_request *req)
+{
+	struct ablkcipher_tfm *crt =
+		crypto_ablkcipher_crt(crypto_ablkcipher_reqtfm(req));
+	return crt->decrypt(req);
+}
+
+static inline unsigned int crypto_ablkcipher_reqsize(
+	struct crypto_ablkcipher *tfm)
+{
+	return crypto_ablkcipher_crt(tfm)->reqsize;
+}
+
+static inline void ablkcipher_request_set_tfm(
+	struct ablkcipher_request *req, struct crypto_ablkcipher *tfm)
+{
+	req->base.tfm = crypto_ablkcipher_tfm(crypto_ablkcipher_crt(tfm)->base);
+}
+
+static inline struct ablkcipher_request *ablkcipher_request_cast(
+	struct crypto_async_request *req)
+{
+	return container_of(req, struct ablkcipher_request, base);
+}
+
+static inline struct ablkcipher_request *ablkcipher_request_alloc(
+	struct crypto_ablkcipher *tfm, gfp_t gfp)
+{
+	struct ablkcipher_request *req;
+
+	req = kmalloc(sizeof(struct ablkcipher_request) +
+		      crypto_ablkcipher_reqsize(tfm), gfp);
+
+	if (likely(req))
+		ablkcipher_request_set_tfm(req, tfm);
+
+	return req;
+}
+
+static inline void ablkcipher_request_free(struct ablkcipher_request *req)
+{
+	kzfree(req);
+}
+
+static inline void ablkcipher_request_set_callback(
+	struct ablkcipher_request *req,
+	u32 flags, crypto_completion_t complete, void *data)
+{
+	req->base.complete = complete;
+	req->base.data = data;
+	req->base.flags = flags;
+}
+
+static inline void ablkcipher_request_set_crypt(
+	struct ablkcipher_request *req,
+	struct scatterlist *src, struct scatterlist *dst,
+	unsigned int nbytes, void *iv)
+{
+	req->src = src;
+	req->dst = dst;
+	req->nbytes = nbytes;
+	req->info = iv;
+}
+
+static inline struct crypto_aead *__crypto_aead_cast(struct crypto_tfm *tfm)
+{
+	return (struct crypto_aead *)tfm;
+}
+
+struct crypto_aead *crypto_alloc_aead(const char *alg_name, u32 type, u32 mask);
+
+static inline struct crypto_tfm *crypto_aead_tfm(struct crypto_aead *tfm)
+{
+	return &tfm->base;
+}
+
+static inline void crypto_free_aead(struct crypto_aead *tfm)
+{
+	crypto_free_tfm(crypto_aead_tfm(tfm));
+}
+
+static inline struct aead_tfm *crypto_aead_crt(struct crypto_aead *tfm)
+{
+	return &crypto_aead_tfm(tfm)->crt_aead;
+}
+
+static inline unsigned int crypto_aead_ivsize(struct crypto_aead *tfm)
+{
+	return crypto_aead_crt(tfm)->ivsize;
+}
+
+static inline unsigned int crypto_aead_authsize(struct crypto_aead *tfm)
+{
+	return crypto_aead_crt(tfm)->authsize;
+}
+
+static inline unsigned int crypto_aead_blocksize(struct crypto_aead *tfm)
+{
+	return crypto_tfm_alg_blocksize(crypto_aead_tfm(tfm));
+}
+
+static inline unsigned int crypto_aead_alignmask(struct crypto_aead *tfm)
+{
+	return crypto_tfm_alg_alignmask(crypto_aead_tfm(tfm));
+}
+
+static inline u32 crypto_aead_get_flags(struct crypto_aead *tfm)
+{
+	return crypto_tfm_get_flags(crypto_aead_tfm(tfm));
+}
+
+static inline void crypto_aead_set_flags(struct crypto_aead *tfm, u32 flags)
+{
+	crypto_tfm_set_flags(crypto_aead_tfm(tfm), flags);
+}
+
+static inline void crypto_aead_clear_flags(struct crypto_aead *tfm, u32 flags)
+{
+	crypto_tfm_clear_flags(crypto_aead_tfm(tfm), flags);
+}
+
+static inline int crypto_aead_setkey(struct crypto_aead *tfm, const u8 *key,
+				     unsigned int keylen)
+{
+	struct aead_tfm *crt = crypto_aead_crt(tfm);
+
+	return crt->setkey(crt->base, key, keylen);
+}
+
+int crypto_aead_setauthsize(struct crypto_aead *tfm, unsigned int authsize);
+
+static inline struct crypto_aead *crypto_aead_reqtfm(struct aead_request *req)
+{
+	return __crypto_aead_cast(req->base.tfm);
+}
+
+static inline int crypto_aead_encrypt(struct aead_request *req)
+{
+	return crypto_aead_crt(crypto_aead_reqtfm(req))->encrypt(req);
+}
+
+static inline int crypto_aead_decrypt(struct aead_request *req)
+{
+	return crypto_aead_crt(crypto_aead_reqtfm(req))->decrypt(req);
+}
+
+static inline unsigned int crypto_aead_reqsize(struct crypto_aead *tfm)
+{
+	return crypto_aead_crt(tfm)->reqsize;
+}
+
+static inline void aead_request_set_tfm(struct aead_request *req,
+					struct crypto_aead *tfm)
+{
+	req->base.tfm = crypto_aead_tfm(crypto_aead_crt(tfm)->base);
+}
+
+static inline struct aead_request *aead_request_alloc(struct crypto_aead *tfm,
+						      gfp_t gfp)
+{
+	struct aead_request *req;
+
+	req = kmalloc(sizeof(*req) + crypto_aead_reqsize(tfm), gfp);
+
+	if (likely(req))
+		aead_request_set_tfm(req, tfm);
+
+	return req;
+}
+
+static inline void aead_request_free(struct aead_request *req)
+{
+	kzfree(req);
+}
+
+static inline void aead_request_set_callback(struct aead_request *req,
+					     u32 flags,
+					     crypto_completion_t complete,
+					     void *data)
+{
+	req->base.complete = complete;
+	req->base.data = data;
+	req->base.flags = flags;
+}
+
+static inline void aead_request_set_crypt(struct aead_request *req,
+					  struct scatterlist *src,
+					  struct scatterlist *dst,
+					  unsigned int cryptlen, u8 *iv)
+{
+	req->src = src;
+	req->dst = dst;
+	req->cryptlen = cryptlen;
+	req->iv = iv;
+}
+
+static inline void aead_request_set_assoc(struct aead_request *req,
+					  struct scatterlist *assoc,
+					  unsigned int assoclen)
+{
+	req->assoc = assoc;
+	req->assoclen = assoclen;
+}
+
+static inline struct crypto_blkcipher *__crypto_blkcipher_cast(
+	struct crypto_tfm *tfm)
+{
+	return (struct crypto_blkcipher *)tfm;
+}
+
+static inline struct crypto_blkcipher *crypto_blkcipher_cast(
+	struct crypto_tfm *tfm)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_BLKCIPHER);
+	return __crypto_blkcipher_cast(tfm);
+}
+
+static inline struct crypto_blkcipher *crypto_alloc_blkcipher(
+	const char *alg_name, u32 type, u32 mask)
+{
+	type &= ~CRYPTO_ALG_TYPE_MASK;
+	type |= CRYPTO_ALG_TYPE_BLKCIPHER;
+	mask |= CRYPTO_ALG_TYPE_MASK;
+
+	return __crypto_blkcipher_cast(crypto_alloc_base(alg_name, type, mask));
+}
+
+static inline struct crypto_tfm *crypto_blkcipher_tfm(
+	struct crypto_blkcipher *tfm)
+{
+	return &tfm->base;
+}
+
+static inline void crypto_free_blkcipher(struct crypto_blkcipher *tfm)
+{
+	crypto_free_tfm(crypto_blkcipher_tfm(tfm));
+}
+
+static inline int crypto_has_blkcipher(const char *alg_name, u32 type, u32 mask)
+{
+	type &= ~CRYPTO_ALG_TYPE_MASK;
+	type |= CRYPTO_ALG_TYPE_BLKCIPHER;
+	mask |= CRYPTO_ALG_TYPE_MASK;
+
+	return crypto_has_alg(alg_name, type, mask);
+}
+
+static inline const char *crypto_blkcipher_name(struct crypto_blkcipher *tfm)
+{
+	return crypto_tfm_alg_name(crypto_blkcipher_tfm(tfm));
+}
+
+static inline struct blkcipher_tfm *crypto_blkcipher_crt(
+	struct crypto_blkcipher *tfm)
+{
+	return &crypto_blkcipher_tfm(tfm)->crt_blkcipher;
+}
+
+static inline struct blkcipher_alg *crypto_blkcipher_alg(
+	struct crypto_blkcipher *tfm)
+{
+	return &crypto_blkcipher_tfm(tfm)->__crt_alg->cra_blkcipher;
+}
+
+static inline unsigned int crypto_blkcipher_ivsize(struct crypto_blkcipher *tfm)
+{
+	return crypto_blkcipher_alg(tfm)->ivsize;
+}
+
+static inline unsigned int crypto_blkcipher_blocksize(
+	struct crypto_blkcipher *tfm)
+{
+	return crypto_tfm_alg_blocksize(crypto_blkcipher_tfm(tfm));
+}
+
+static inline unsigned int crypto_blkcipher_alignmask(
+	struct crypto_blkcipher *tfm)
+{
+	return crypto_tfm_alg_alignmask(crypto_blkcipher_tfm(tfm));
+}
+
+static inline u32 crypto_blkcipher_get_flags(struct crypto_blkcipher *tfm)
+{
+	return crypto_tfm_get_flags(crypto_blkcipher_tfm(tfm));
+}
+
+static inline void crypto_blkcipher_set_flags(struct crypto_blkcipher *tfm,
+					      u32 flags)
+{
+	crypto_tfm_set_flags(crypto_blkcipher_tfm(tfm), flags);
+}
+
+static inline void crypto_blkcipher_clear_flags(struct crypto_blkcipher *tfm,
+						u32 flags)
+{
+	crypto_tfm_clear_flags(crypto_blkcipher_tfm(tfm), flags);
+}
+
+static inline int crypto_blkcipher_setkey(struct crypto_blkcipher *tfm,
+					  const u8 *key, unsigned int keylen)
+{
+	return crypto_blkcipher_crt(tfm)->setkey(crypto_blkcipher_tfm(tfm),
+						 key, keylen);
+}
+
+static inline int crypto_blkcipher_encrypt(struct blkcipher_desc *desc,
+					   struct scatterlist *dst,
+					   struct scatterlist *src,
+					   unsigned int nbytes)
+{
+	desc->info = crypto_blkcipher_crt(desc->tfm)->iv;
+	return crypto_blkcipher_crt(desc->tfm)->encrypt(desc, dst, src, nbytes);
+}
+
+static inline int crypto_blkcipher_encrypt_iv(struct blkcipher_desc *desc,
+					      struct scatterlist *dst,
+					      struct scatterlist *src,
+					      unsigned int nbytes)
+{
+	return crypto_blkcipher_crt(desc->tfm)->encrypt(desc, dst, src, nbytes);
+}
+
+static inline int crypto_blkcipher_decrypt(struct blkcipher_desc *desc,
+					   struct scatterlist *dst,
+					   struct scatterlist *src,
+					   unsigned int nbytes)
+{
+	desc->info = crypto_blkcipher_crt(desc->tfm)->iv;
+	return crypto_blkcipher_crt(desc->tfm)->decrypt(desc, dst, src, nbytes);
+}
+
+static inline int crypto_blkcipher_decrypt_iv(struct blkcipher_desc *desc,
+					      struct scatterlist *dst,
+					      struct scatterlist *src,
+					      unsigned int nbytes)
+{
+	return crypto_blkcipher_crt(desc->tfm)->decrypt(desc, dst, src, nbytes);
+}
+
+static inline void crypto_blkcipher_set_iv(struct crypto_blkcipher *tfm,
+					   const u8 *src, unsigned int len)
+{
+	memcpy(crypto_blkcipher_crt(tfm)->iv, src, len);
+}
+
+static inline void crypto_blkcipher_get_iv(struct crypto_blkcipher *tfm,
+					   u8 *dst, unsigned int len)
+{
+	memcpy(dst, crypto_blkcipher_crt(tfm)->iv, len);
+}
+
+static inline struct crypto_cipher *__crypto_cipher_cast(struct crypto_tfm *tfm)
+{
+	return (struct crypto_cipher *)tfm;
+}
+
+static inline struct crypto_cipher *crypto_cipher_cast(struct crypto_tfm *tfm)
+{
+	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER);
+	return __crypto_cipher_cast(tfm);
+}
+
+static inline struct crypto_cipher *crypto_alloc_cipher(const char *alg_name,
+							u32 type, u32 mask)
+{
+	type &= ~CRYPTO_ALG_TYPE_MASK;
+	type |= CRYPTO_ALG_TYPE_CIPHER;
+	mask |= CRYPTO_ALG_TYPE_MASK;
+
+	return __crypto_cipher_cast(crypto_alloc_base(alg_name, type, mask));
+}
+
+static inline struct crypto_tfm *crypto_cipher_tfm(struct crypto_cipher *tfm)
+{
+	return &tfm->base;
+}
+
+static inline void crypto_free_cipher(struct crypto_cipher *tfm)
+{
+	crypto_free_tfm(crypto_cipher_tfm(tfm));
+}
+
+static inline int crypto_has_cipher(const char *alg_name, u32 type, u32 mask)
+{
+	type &= ~CRYPTO_ALG_TYPE_MASK;
+	type |= CRYPTO_ALG_TYPE_CIPHER;
+	mask |= CRYPTO_ALG_TYPE_MASK;
+
+	return crypto_has_alg(alg_name, type, mask);
+}
+
+static inline struct cipher_tfm *crypto_cipher_crt(struct crypto_cipher *tfm)
+{
+	return &crypto_cipher_tfm(tfm)->crt_cipher;
+}
+
+static inline unsigned int crypto_cipher_blocksize(struct crypto_cipher *tfm)
+{
+	return crypto_tfm_alg_blocksize(crypto_cipher_tfm(tfm));
+}
+
+static inline unsigned int crypto_cipher_alignmask(struct crypto_cipher *tfm)
+{
+	return crypto_tfm_alg_alignmask(crypto_cipher_tfm(tfm));
+}
+
+static inline u32 crypto_cipher_get_flags(struct crypto_cipher *tfm)
+{
+	return crypto_tfm_get_flags(crypto_cipher_tfm(tfm));
+}
+
+static inline void crypto_cipher_set_flags(struct crypto_cipher *tfm,
+					   u32 flags)
+{
+	crypto_tfm_set_flags(crypto_cipher_tfm(tfm), flags);
+}
+
+static inline void crypto_cipher_clear_flags(struct crypto_cipher *tfm,
+					     u32 flags)
+{
+	crypto_tfm_clear_flags(crypto_cipher_tfm(tfm), flags);
+}
+
+static inline int crypto_cipher_setkey(struct crypto_cipher *tfm,
+                                       const u8 *key, unsigned int keylen)
+{
+	return crypto_cipher_crt(tfm)->cit_setkey(crypto_cipher_tfm(tfm),
+						  key, keylen);
+}
+
+static inline void crypto_cipher_encrypt_one(struct crypto_cipher *tfm,
+					     u8 *dst, const u8 *src)
+{
+	crypto_cipher_crt(tfm)->cit_encrypt_one(crypto_cipher_tfm(tfm),
+						dst, src);
+}
+
+static inline void crypto_cipher_decrypt_one(struct crypto_cipher *tfm,
+					     u8 *dst, const u8 *src)
+{
+	crypto_cipher_crt(tfm)->cit_decrypt_one(crypto_cipher_tfm(tfm),
+						dst, src);
+}
+
+static inline struct crypto_hash *__crypto_hash_cast(struct crypto_tfm *tfm)
+{
+	return (struct crypto_hash *)tfm;
+}
+
+static inline struct crypto_hash *crypto_hash_cast(struct crypto_tfm *tfm)
+{
+	BUG_ON((crypto_tfm_alg_type(tfm) ^ CRYPTO_ALG_TYPE_HASH) &
+	       CRYPTO_ALG_TYPE_HASH_MASK);
+	return __crypto_hash_cast(tfm);
+}
+
+static inline struct crypto_hash *crypto_alloc_hash(const char *alg_name,
+						    u32 type, u32 mask)
+{
+	type &= ~CRYPTO_ALG_TYPE_MASK;
+	mask &= ~CRYPTO_ALG_TYPE_MASK;
+	type |= CRYPTO_ALG_TYPE_HASH;
+	mask |= CRYPTO_ALG_TYPE_HASH_MASK;
+
+	return __crypto_hash_cast(crypto_alloc_base(alg_name, type, mask));
+}
+
+static inline struct crypto_tfm *crypto_hash_tfm(struct crypto_hash *tfm)
+{
+	return &tfm->base;
+}
+
+static inline void crypto_free_hash(struct crypto_hash *tfm)
+{
+	crypto_free_tfm(crypto_hash_tfm(tfm));
+}
+
+static inline int crypto_has_hash(const char *alg_name, u32 type, u32 mask)
+{
+	type &= ~CRYPTO_ALG_TYPE_MASK;
+	mask &= ~CRYPTO_ALG_TYPE_MASK;
+	type |= CRYPTO_ALG_TYPE_HASH;
+	mask |= CRYPTO_ALG_TYPE_HASH_MASK;
+
+	return crypto_has_alg(alg_name, type, mask);
+}
+
+static inline struct hash_tfm *crypto_hash_crt(struct crypto_hash *tfm)
+{
+	return &crypto_hash_tfm(tfm)->crt_hash;
+}
+
+static inline unsigned int crypto_hash_blocksize(struct crypto_hash *tfm)
+{
+	return crypto_tfm_alg_blocksize(crypto_hash_tfm(tfm));
+}
+
+static inline unsigned int crypto_hash_alignmask(struct crypto_hash *tfm)
+{
+	return crypto_tfm_alg_alignmask(crypto_hash_tfm(tfm));
+}
+
+static inline unsigned int crypto_hash_digestsize(struct crypto_hash *tfm)
+{
+	return crypto_hash_crt(tfm)->digestsize;
+}
+
+static inline u32 crypto_hash_get_flags(struct crypto_hash *tfm)
+{
+	return crypto_tfm_get_flags(crypto_hash_tfm(tfm));
+}
+
+static inline void crypto_hash_set_flags(struct crypto_hash *tfm, u32 flags)
+{
+	crypto_tfm_set_flags(crypto_hash_tfm(tfm), flags);
+}
+
+static inline void crypto_hash_clear_flags(struct crypto_hash *tfm, u32 flags)
+{
+	crypto_tfm_clear_flags(crypto_hash_tfm(tfm), flags);
+}
+
+static inline int crypto_hash_init(struct hash_desc *desc)
+{
+	return crypto_hash_crt(desc->tfm)->init(desc);
+}
+
+static inline int crypto_hash_update(struct hash_desc *desc,
+				     struct scatterlist *sg,
+				     unsigned int nbytes)
+{
+	return crypto_hash_crt(desc->tfm)->update(desc, sg, nbytes);
+}
+
+static inline int crypto_hash_final(struct hash_desc *desc, u8 *out)
+{
+	return crypto_hash_crt(desc->tfm)->final(desc, out);
+}
+
+static inline int crypto_hash_digest(struct hash_desc *desc,
+				     struct scatterlist *sg,
+				     unsigned int nbytes, u8 *out)
+{
+	return crypto_hash_crt(desc->tfm)->digest(desc, sg, nbytes, out);
+}
+
+static inline int crypto_hash_setkey(struct crypto_hash *hash,
+				     const u8 *key, unsigned int keylen)
+{
+	return crypto_hash_crt(hash)->setkey(hash, key, keylen);
+}
+
+static inline struct crypto_comp *__crypto_comp_cast(struct crypto_tfm *tfm)
+{
+	return (struct crypto_comp *)tfm;
+}
+
+static inline struct crypto_comp *crypto_comp_cast(struct crypto_tfm *tfm)
+{
+	BUG_ON((crypto_tfm_alg_type(tfm) ^ CRYPTO_ALG_TYPE_COMPRESS) &
+	       CRYPTO_ALG_TYPE_MASK);
+	return __crypto_comp_cast(tfm);
+}
+
+static inline struct crypto_comp *crypto_alloc_comp(const char *alg_name,
+						    u32 type, u32 mask)
+{
+	type &= ~CRYPTO_ALG_TYPE_MASK;
+	type |= CRYPTO_ALG_TYPE_COMPRESS;
+	mask |= CRYPTO_ALG_TYPE_MASK;
+
+	return __crypto_comp_cast(crypto_alloc_base(alg_name, type, mask));
+}
+
+static inline struct crypto_tfm *crypto_comp_tfm(struct crypto_comp *tfm)
+{
+	return &tfm->base;
+}
+
+static inline void crypto_free_comp(struct crypto_comp *tfm)
+{
+	crypto_free_tfm(crypto_comp_tfm(tfm));
+}
+
+static inline int crypto_has_comp(const char *alg_name, u32 type, u32 mask)
+{
+	type &= ~CRYPTO_ALG_TYPE_MASK;
+	type |= CRYPTO_ALG_TYPE_COMPRESS;
+	mask |= CRYPTO_ALG_TYPE_MASK;
+
+	return crypto_has_alg(alg_name, type, mask);
+}
+
+static inline const char *crypto_comp_name(struct crypto_comp *tfm)
+{
+	return crypto_tfm_alg_name(crypto_comp_tfm(tfm));
+}
+
+static inline struct compress_tfm *crypto_comp_crt(struct crypto_comp *tfm)
+{
+	return &crypto_comp_tfm(tfm)->crt_compress;
+}
+
+static inline int crypto_comp_compress(struct crypto_comp *tfm,
+                                       const u8 *src, unsigned int slen,
+                                       u8 *dst, unsigned int *dlen)
+{
+	return crypto_comp_crt(tfm)->cot_compress(crypto_comp_tfm(tfm),
+						  src, slen, dst, dlen);
+}
+
+static inline int crypto_comp_decompress(struct crypto_comp *tfm,
+                                         const u8 *src, unsigned int slen,
+                                         u8 *dst, unsigned int *dlen)
+{
+	return crypto_comp_crt(tfm)->cot_decompress(crypto_comp_tfm(tfm),
+						    src, slen, dst, dlen);
+}
+
+#endif	/* _LINUX_CRYPTO_H */
+
diff --git a/include/linux/cryptohash.h b/include/linux/cryptohash.h
new file mode 100644
index 00000000..2cd9f1cf
--- /dev/null
+++ b/include/linux/cryptohash.h
@@ -0,0 +1,18 @@
+#ifndef __CRYPTOHASH_H
+#define __CRYPTOHASH_H
+
+#define SHA_DIGEST_WORDS 5
+#define SHA_MESSAGE_BYTES (512 /*bits*/ / 8)
+#define SHA_WORKSPACE_WORDS 16
+
+void sha_init(__u32 *buf);
+void sha_transform(__u32 *digest, const char *data, __u32 *W);
+
+#define MD5_DIGEST_WORDS 4
+#define MD5_MESSAGE_BYTES 64
+
+void md5_transform(__u32 *hash, __u32 const *in);
+
+__u32 half_md4_transform(__u32 buf[4], __u32 const in[8]);
+
+#endif
diff --git a/include/linux/cryptouser.h b/include/linux/cryptouser.h
new file mode 100644
index 00000000..4abf2ea6
--- /dev/null
+++ b/include/linux/cryptouser.h
@@ -0,0 +1,105 @@
+/*
+ * Crypto user configuration API.
+ *
+ * Copyright (C) 2011 secunet Security Networks AG
+ * Copyright (C) 2011 Steffen Klassert <steffen.klassert@secunet.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+/* Netlink configuration messages.  */
+enum {
+	CRYPTO_MSG_BASE = 0x10,
+	CRYPTO_MSG_NEWALG = 0x10,
+	CRYPTO_MSG_DELALG,
+	CRYPTO_MSG_UPDATEALG,
+	CRYPTO_MSG_GETALG,
+	__CRYPTO_MSG_MAX
+};
+#define CRYPTO_MSG_MAX (__CRYPTO_MSG_MAX - 1)
+#define CRYPTO_NR_MSGTYPES (CRYPTO_MSG_MAX + 1 - CRYPTO_MSG_BASE)
+
+#define CRYPTO_MAX_NAME CRYPTO_MAX_ALG_NAME
+
+/* Netlink message attributes.  */
+enum crypto_attr_type_t {
+	CRYPTOCFGA_UNSPEC,
+	CRYPTOCFGA_PRIORITY_VAL,	/* __u32 */
+	CRYPTOCFGA_REPORT_LARVAL,	/* struct crypto_report_larval */
+	CRYPTOCFGA_REPORT_HASH,		/* struct crypto_report_hash */
+	CRYPTOCFGA_REPORT_BLKCIPHER,	/* struct crypto_report_blkcipher */
+	CRYPTOCFGA_REPORT_AEAD,		/* struct crypto_report_aead */
+	CRYPTOCFGA_REPORT_COMPRESS,	/* struct crypto_report_comp */
+	CRYPTOCFGA_REPORT_RNG,		/* struct crypto_report_rng */
+	CRYPTOCFGA_REPORT_CIPHER,	/* struct crypto_report_cipher */
+	__CRYPTOCFGA_MAX
+
+#define CRYPTOCFGA_MAX (__CRYPTOCFGA_MAX - 1)
+};
+
+struct crypto_user_alg {
+	char cru_name[CRYPTO_MAX_ALG_NAME];
+	char cru_driver_name[CRYPTO_MAX_ALG_NAME];
+	char cru_module_name[CRYPTO_MAX_ALG_NAME];
+	__u32 cru_type;
+	__u32 cru_mask;
+	__u32 cru_refcnt;
+	__u32 cru_flags;
+};
+
+struct crypto_report_larval {
+	char type[CRYPTO_MAX_NAME];
+};
+
+struct crypto_report_hash {
+	char type[CRYPTO_MAX_NAME];
+	unsigned int blocksize;
+	unsigned int digestsize;
+};
+
+struct crypto_report_cipher {
+	char type[CRYPTO_MAX_ALG_NAME];
+	unsigned int blocksize;
+	unsigned int min_keysize;
+	unsigned int max_keysize;
+};
+
+struct crypto_report_blkcipher {
+	char type[CRYPTO_MAX_NAME];
+	char geniv[CRYPTO_MAX_NAME];
+	unsigned int blocksize;
+	unsigned int min_keysize;
+	unsigned int max_keysize;
+	unsigned int ivsize;
+};
+
+struct crypto_report_aead {
+	char type[CRYPTO_MAX_NAME];
+	char geniv[CRYPTO_MAX_NAME];
+	unsigned int blocksize;
+	unsigned int maxauthsize;
+	unsigned int ivsize;
+};
+
+struct crypto_report_comp {
+	char type[CRYPTO_MAX_NAME];
+};
+
+struct crypto_report_rng {
+	char type[CRYPTO_MAX_NAME];
+	unsigned int seedsize;
+};
+
+#define CRYPTO_REPORT_MAXSIZE (sizeof(struct crypto_user_alg) + \
+			       sizeof(struct crypto_report_blkcipher))
diff --git a/include/linux/cs5535.h b/include/linux/cs5535.h
new file mode 100644
index 00000000..c077aec3
--- /dev/null
+++ b/include/linux/cs5535.h
@@ -0,0 +1,238 @@
+/*
+ * AMD CS5535/CS5536 definitions
+ * Copyright (C) 2006  Advanced Micro Devices, Inc.
+ * Copyright (C) 2009  Andres Salomon <dilinger@collabora.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ */
+
+#ifndef _CS5535_H
+#define _CS5535_H
+
+#include <asm/msr.h>
+
+/* MSRs */
+#define MSR_GLIU_P2D_RO0	0x10000029
+
+#define MSR_LX_GLD_MSR_CONFIG	0x48002001
+#define MSR_LX_MSR_PADSEL	0x48002011	/* NOT 0x48000011; the data
+						 * sheet has the wrong value */
+#define MSR_GLCP_SYS_RSTPLL	0x4C000014
+#define MSR_GLCP_DOTPLL		0x4C000015
+
+#define MSR_LBAR_SMB		0x5140000B
+#define MSR_LBAR_GPIO		0x5140000C
+#define MSR_LBAR_MFGPT		0x5140000D
+#define MSR_LBAR_ACPI		0x5140000E
+#define MSR_LBAR_PMS		0x5140000F
+
+#define MSR_DIVIL_SOFT_RESET	0x51400017
+
+#define MSR_PIC_YSEL_LOW	0x51400020
+#define MSR_PIC_YSEL_HIGH	0x51400021
+#define MSR_PIC_ZSEL_LOW	0x51400022
+#define MSR_PIC_ZSEL_HIGH	0x51400023
+#define MSR_PIC_IRQM_LPC	0x51400025
+
+#define MSR_MFGPT_IRQ		0x51400028
+#define MSR_MFGPT_NR		0x51400029
+#define MSR_MFGPT_SETUP		0x5140002B
+
+#define MSR_RTC_DOMA_OFFSET	0x51400055
+#define MSR_RTC_MONA_OFFSET	0x51400056
+#define MSR_RTC_CEN_OFFSET	0x51400057
+
+#define MSR_LX_SPARE_MSR	0x80000011	/* DC-specific */
+
+#define MSR_GX_GLD_MSR_CONFIG	0xC0002001
+#define MSR_GX_MSR_PADSEL	0xC0002011
+
+static inline int cs5535_pic_unreqz_select_high(unsigned int group,
+						unsigned int irq)
+{
+	uint32_t lo, hi;
+
+	rdmsr(MSR_PIC_ZSEL_HIGH, lo, hi);
+	lo &= ~(0xF << (group * 4));
+	lo |= (irq & 0xF) << (group * 4);
+	wrmsr(MSR_PIC_ZSEL_HIGH, lo, hi);
+	return 0;
+}
+
+/* PIC registers */
+#define CS5536_PIC_INT_SEL1	0x4d0
+#define CS5536_PIC_INT_SEL2	0x4d1
+
+/* resource sizes */
+#define LBAR_GPIO_SIZE		0xFF
+#define LBAR_MFGPT_SIZE		0x40
+#define LBAR_ACPI_SIZE		0x40
+#define LBAR_PMS_SIZE		0x80
+
+/*
+ * PMC registers (PMS block)
+ * It is only safe to access these registers as dword accesses.
+ * See CS5536 Specification Update erratas 17 & 18
+ */
+#define CS5536_PM_SCLK		0x10
+#define CS5536_PM_IN_SLPCTL	0x20
+#define CS5536_PM_WKXD		0x34
+#define CS5536_PM_WKD		0x30
+#define CS5536_PM_SSC		0x54
+
+/*
+ * PM registers (ACPI block)
+ * It is only safe to access these registers as dword accesses.
+ * See CS5536 Specification Update erratas 17 & 18
+ */
+#define CS5536_PM1_STS		0x00
+#define CS5536_PM1_EN		0x02
+#define CS5536_PM1_CNT		0x08
+#define CS5536_PM_GPE0_STS	0x18
+#define CS5536_PM_GPE0_EN	0x1c
+
+/* CS5536_PM1_STS bits */
+#define CS5536_WAK_FLAG		(1 << 15)
+#define CS5536_PWRBTN_FLAG	(1 << 8)
+
+/* CS5536_PM1_EN bits */
+#define CS5536_PM_PWRBTN	(1 << 8)
+#define CS5536_PM_RTC		(1 << 10)
+
+/* CS5536_PM_GPE0_STS bits */
+#define CS5536_GPIOM7_PME_FLAG	(1 << 31)
+#define CS5536_GPIOM6_PME_FLAG	(1 << 30)
+
+/* CS5536_PM_GPE0_EN bits */
+#define CS5536_GPIOM7_PME_EN	(1 << 31)
+#define CS5536_GPIOM6_PME_EN	(1 << 30)
+
+/* VSA2 magic values */
+#define VSA_VRC_INDEX		0xAC1C
+#define VSA_VRC_DATA		0xAC1E
+#define VSA_VR_UNLOCK		0xFC53  /* unlock virtual register */
+#define VSA_VR_SIGNATURE	0x0003
+#define VSA_VR_MEM_SIZE		0x0200
+#define AMD_VSA_SIG		0x4132  /* signature is ascii 'VSA2' */
+#define GSW_VSA_SIG		0x534d  /* General Software signature */
+
+#include <linux/io.h>
+
+static inline int cs5535_has_vsa2(void)
+{
+	static int has_vsa2 = -1;
+
+	if (has_vsa2 == -1) {
+		uint16_t val;
+
+		/*
+		 * The VSA has virtual registers that we can query for a
+		 * signature.
+		 */
+		outw(VSA_VR_UNLOCK, VSA_VRC_INDEX);
+		outw(VSA_VR_SIGNATURE, VSA_VRC_INDEX);
+
+		val = inw(VSA_VRC_DATA);
+		has_vsa2 = (val == AMD_VSA_SIG || val == GSW_VSA_SIG);
+	}
+
+	return has_vsa2;
+}
+
+/* GPIOs */
+#define GPIO_OUTPUT_VAL		0x00
+#define GPIO_OUTPUT_ENABLE	0x04
+#define GPIO_OUTPUT_OPEN_DRAIN	0x08
+#define GPIO_OUTPUT_INVERT	0x0C
+#define GPIO_OUTPUT_AUX1	0x10
+#define GPIO_OUTPUT_AUX2	0x14
+#define GPIO_PULL_UP		0x18
+#define GPIO_PULL_DOWN		0x1C
+#define GPIO_INPUT_ENABLE	0x20
+#define GPIO_INPUT_INVERT	0x24
+#define GPIO_INPUT_FILTER	0x28
+#define GPIO_INPUT_EVENT_COUNT	0x2C
+#define GPIO_READ_BACK		0x30
+#define GPIO_INPUT_AUX1		0x34
+#define GPIO_EVENTS_ENABLE	0x38
+#define GPIO_LOCK_ENABLE	0x3C
+#define GPIO_POSITIVE_EDGE_EN	0x40
+#define GPIO_NEGATIVE_EDGE_EN	0x44
+#define GPIO_POSITIVE_EDGE_STS	0x48
+#define GPIO_NEGATIVE_EDGE_STS	0x4C
+
+#define GPIO_FLTR7_AMOUNT	0xD8
+
+#define GPIO_MAP_X		0xE0
+#define GPIO_MAP_Y		0xE4
+#define GPIO_MAP_Z		0xE8
+#define GPIO_MAP_W		0xEC
+
+#define GPIO_FE7_SEL		0xF7
+
+void cs5535_gpio_set(unsigned offset, unsigned int reg);
+void cs5535_gpio_clear(unsigned offset, unsigned int reg);
+int cs5535_gpio_isset(unsigned offset, unsigned int reg);
+int cs5535_gpio_set_irq(unsigned group, unsigned irq);
+void cs5535_gpio_setup_event(unsigned offset, int pair, int pme);
+
+/* MFGPTs */
+
+#define MFGPT_MAX_TIMERS	8
+#define MFGPT_TIMER_ANY		(-1)
+
+#define MFGPT_DOMAIN_WORKING	1
+#define MFGPT_DOMAIN_STANDBY	2
+#define MFGPT_DOMAIN_ANY	(MFGPT_DOMAIN_WORKING | MFGPT_DOMAIN_STANDBY)
+
+#define MFGPT_CMP1		0
+#define MFGPT_CMP2		1
+
+#define MFGPT_EVENT_IRQ		0
+#define MFGPT_EVENT_NMI		1
+#define MFGPT_EVENT_RESET	3
+
+#define MFGPT_REG_CMP1		0
+#define MFGPT_REG_CMP2		2
+#define MFGPT_REG_COUNTER	4
+#define MFGPT_REG_SETUP		6
+
+#define MFGPT_SETUP_CNTEN	(1 << 15)
+#define MFGPT_SETUP_CMP2	(1 << 14)
+#define MFGPT_SETUP_CMP1	(1 << 13)
+#define MFGPT_SETUP_SETUP	(1 << 12)
+#define MFGPT_SETUP_STOPEN	(1 << 11)
+#define MFGPT_SETUP_EXTEN	(1 << 10)
+#define MFGPT_SETUP_REVEN	(1 << 5)
+#define MFGPT_SETUP_CLKSEL	(1 << 4)
+
+struct cs5535_mfgpt_timer;
+
+extern uint16_t cs5535_mfgpt_read(struct cs5535_mfgpt_timer *timer,
+		uint16_t reg);
+extern void cs5535_mfgpt_write(struct cs5535_mfgpt_timer *timer, uint16_t reg,
+		uint16_t value);
+
+extern int cs5535_mfgpt_toggle_event(struct cs5535_mfgpt_timer *timer, int cmp,
+		int event, int enable);
+extern int cs5535_mfgpt_set_irq(struct cs5535_mfgpt_timer *timer, int cmp,
+		int *irq, int enable);
+extern struct cs5535_mfgpt_timer *cs5535_mfgpt_alloc_timer(int timer,
+		int domain);
+extern void cs5535_mfgpt_free_timer(struct cs5535_mfgpt_timer *timer);
+
+static inline int cs5535_mfgpt_setup_irq(struct cs5535_mfgpt_timer *timer,
+		int cmp, int *irq)
+{
+	return cs5535_mfgpt_set_irq(timer, cmp, irq, 1);
+}
+
+static inline int cs5535_mfgpt_release_irq(struct cs5535_mfgpt_timer *timer,
+		int cmp, int *irq)
+{
+	return cs5535_mfgpt_set_irq(timer, cmp, irq, 0);
+}
+
+#endif
diff --git a/include/linux/ctype.h b/include/linux/ctype.h
new file mode 100644
index 00000000..8acfe312
--- /dev/null
+++ b/include/linux/ctype.h
@@ -0,0 +1,64 @@
+#ifndef _LINUX_CTYPE_H
+#define _LINUX_CTYPE_H
+
+/*
+ * NOTE! This ctype does not handle EOF like the standard C
+ * library is required to.
+ */
+
+#define _U	0x01	/* upper */
+#define _L	0x02	/* lower */
+#define _D	0x04	/* digit */
+#define _C	0x08	/* cntrl */
+#define _P	0x10	/* punct */
+#define _S	0x20	/* white space (space/lf/tab) */
+#define _X	0x40	/* hex digit */
+#define _SP	0x80	/* hard space (0x20) */
+
+extern const unsigned char _ctype[];
+
+#define __ismask(x) (_ctype[(int)(unsigned char)(x)])
+
+#define isalnum(c)	((__ismask(c)&(_U|_L|_D)) != 0)
+#define isalpha(c)	((__ismask(c)&(_U|_L)) != 0)
+#define iscntrl(c)	((__ismask(c)&(_C)) != 0)
+#define isdigit(c)	((__ismask(c)&(_D)) != 0)
+#define isgraph(c)	((__ismask(c)&(_P|_U|_L|_D)) != 0)
+#define islower(c)	((__ismask(c)&(_L)) != 0)
+#define isprint(c)	((__ismask(c)&(_P|_U|_L|_D|_SP)) != 0)
+#define ispunct(c)	((__ismask(c)&(_P)) != 0)
+/* Note: isspace() must return false for %NUL-terminator */
+#define isspace(c)	((__ismask(c)&(_S)) != 0)
+#define isupper(c)	((__ismask(c)&(_U)) != 0)
+#define isxdigit(c)	((__ismask(c)&(_D|_X)) != 0)
+
+#define isascii(c) (((unsigned char)(c))<=0x7f)
+#define toascii(c) (((unsigned char)(c))&0x7f)
+
+static inline unsigned char __tolower(unsigned char c)
+{
+	if (isupper(c))
+		c -= 'A'-'a';
+	return c;
+}
+
+static inline unsigned char __toupper(unsigned char c)
+{
+	if (islower(c))
+		c -= 'a'-'A';
+	return c;
+}
+
+#define tolower(c) __tolower(c)
+#define toupper(c) __toupper(c)
+
+/*
+ * Fast implementation of tolower() for internal usage. Do not use in your
+ * code.
+ */
+static inline char _tolower(const char c)
+{
+	return c | 0x20;
+}
+
+#endif
diff --git a/include/linux/cuda.h b/include/linux/cuda.h
new file mode 100644
index 00000000..9f9865ff
--- /dev/null
+++ b/include/linux/cuda.h
@@ -0,0 +1,41 @@
+/*
+ * Definitions for talking to the CUDA.  The CUDA is a microcontroller
+ * which controls the ADB, system power, RTC, and various other things.
+ *
+ * Copyright (C) 1996 Paul Mackerras.
+ */
+
+#ifndef _LINUX_CUDA_H
+#define _LINUX_CUDA_H
+
+/* CUDA commands (2nd byte) */
+#define CUDA_WARM_START		0
+#define CUDA_AUTOPOLL		1
+#define CUDA_GET_6805_ADDR	2
+#define CUDA_GET_TIME		3
+#define CUDA_GET_PRAM		7
+#define CUDA_SET_6805_ADDR	8
+#define CUDA_SET_TIME		9
+#define CUDA_POWERDOWN		0xa
+#define CUDA_POWERUP_TIME	0xb
+#define CUDA_SET_PRAM		0xc
+#define CUDA_MS_RESET		0xd
+#define CUDA_SEND_DFAC		0xe
+#define CUDA_RESET_SYSTEM	0x11
+#define CUDA_SET_IPL		0x12
+#define CUDA_SET_AUTO_RATE	0x14
+#define CUDA_GET_AUTO_RATE	0x16
+#define CUDA_SET_DEVICE_LIST	0x19
+#define CUDA_GET_DEVICE_LIST	0x1a
+#define CUDA_GET_SET_IIC	0x22
+
+#ifdef __KERNEL__
+
+extern int find_via_cuda(void);
+extern int cuda_request(struct adb_request *req,
+			void (*done)(struct adb_request *), int nbytes, ...);
+extern void cuda_poll(void);
+
+#endif	/* __KERNEL */
+
+#endif /* _LINUX_CUDA_H */
diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h
new file mode 100644
index 00000000..a5049eaf
--- /dev/null
+++ b/include/linux/cyclades.h
@@ -0,0 +1,784 @@
+/* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $
+ * linux/include/linux/cyclades.h
+ *
+ * This file was initially written by
+ * Randolph Bentson <bentson@grieg.seaslug.org> and is maintained by
+ * Ivan Passos <ivan@cyclades.com>.
+ *
+ * This file contains the general definitions for the cyclades.c driver
+ *$Log: cyclades.h,v $
+ *Revision 3.1  2002/01/29 11:36:16  henrique
+ *added throttle field on struct cyclades_port to indicate whether the
+ *port is throttled or not
+ *
+ *Revision 3.1  2000/04/19 18:52:52  ivan
+ *converted address fields to unsigned long and added fields for physical
+ *addresses on cyclades_card structure;
+ *
+ *Revision 3.0  1998/11/02 14:20:59  ivan
+ *added nports field on cyclades_card structure;
+ *
+ *Revision 2.5  1998/08/03 16:57:01  ivan
+ *added cyclades_idle_stats structure;
+ * 
+ *Revision 2.4  1998/06/01 12:09:53  ivan
+ *removed closing_wait2 from cyclades_port structure;
+ *
+ *Revision 2.3  1998/03/16 18:01:12  ivan
+ *changes in the cyclades_port structure to get it closer to the 
+ *standard serial port structure;
+ *added constants for new ioctls;
+ *
+ *Revision 2.2  1998/02/17 16:50:00  ivan
+ *changes in the cyclades_port structure (addition of shutdown_wait and 
+ *chip_rev variables);
+ *added constants for new ioctls and for CD1400 rev. numbers.
+ *
+ *Revision 2.1	1997/10/24 16:03:00  ivan
+ *added rflow (which allows enabling the CD1400 special flow control 
+ *feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to 
+ *cyclades_port structure;
+ *added Alpha support
+ *
+ *Revision 2.0  1997/06/30 10:30:00  ivan
+ *added some new doorbell command constants related to IOCTLW and
+ *UART error signaling
+ *
+ *Revision 1.8  1997/06/03 15:30:00  ivan
+ *added constant ZFIRM_HLT
+ *added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin)
+ *
+ *Revision 1.7  1997/03/26 10:30:00  daniel
+ *new entries at the end of cyclades_port struct to reallocate
+ *variables illegally allocated within card memory.
+ *
+ *Revision 1.6  1996/09/09 18:35:30  bentson
+ *fold in changes for Cyclom-Z -- including structures for
+ *communicating with board as well modest changes to original
+ *structures to support new features.
+ *
+ *Revision 1.5  1995/11/13 21:13:31  bentson
+ *changes suggested by Michael Chastain <mec@duracef.shout.net>
+ *to support use of this file in non-kernel applications
+ *
+ *
+ */
+
+#ifndef _LINUX_CYCLADES_H
+#define _LINUX_CYCLADES_H
+
+#include <linux/types.h>
+
+struct cyclades_monitor {
+        unsigned long           int_count;
+        unsigned long           char_count;
+        unsigned long           char_max;
+        unsigned long           char_last;
+};
+
+/*
+ * These stats all reflect activity since the device was last initialized.
+ * (i.e., since the port was opened with no other processes already having it
+ * open)
+ */
+struct cyclades_idle_stats {
+    __kernel_time_t in_use;	/* Time device has been in use (secs) */
+    __kernel_time_t recv_idle;	/* Time since last char received (secs) */
+    __kernel_time_t xmit_idle;	/* Time since last char transmitted (secs) */
+    unsigned long  recv_bytes;	/* Bytes received */
+    unsigned long  xmit_bytes;	/* Bytes transmitted */
+    unsigned long  overruns;	/* Input overruns */
+    unsigned long  frame_errs;	/* Input framing errors */
+    unsigned long  parity_errs;	/* Input parity errors */
+};
+
+#define CYCLADES_MAGIC  0x4359
+
+#define CYGETMON                0x435901
+#define CYGETTHRESH             0x435902
+#define CYSETTHRESH             0x435903
+#define CYGETDEFTHRESH          0x435904
+#define CYSETDEFTHRESH          0x435905
+#define CYGETTIMEOUT            0x435906
+#define CYSETTIMEOUT            0x435907
+#define CYGETDEFTIMEOUT         0x435908
+#define CYSETDEFTIMEOUT         0x435909
+#define CYSETRFLOW		0x43590a
+#define CYGETRFLOW		0x43590b
+#define CYSETRTSDTR_INV		0x43590c
+#define CYGETRTSDTR_INV		0x43590d
+#define CYZSETPOLLCYCLE		0x43590e
+#define CYZGETPOLLCYCLE		0x43590f
+#define CYGETCD1400VER		0x435910
+#define	CYSETWAIT		0x435912
+#define	CYGETWAIT		0x435913
+
+/*************** CYCLOM-Z ADDITIONS ***************/
+
+#define CZIOC           ('M' << 8)
+#define CZ_NBOARDS      (CZIOC|0xfa)
+#define CZ_BOOT_START   (CZIOC|0xfb)
+#define CZ_BOOT_DATA    (CZIOC|0xfc)
+#define CZ_BOOT_END     (CZIOC|0xfd)
+#define CZ_TEST         (CZIOC|0xfe)
+
+#define CZ_DEF_POLL	(HZ/25)
+
+#define MAX_BOARD       4       /* Max number of boards */
+#define MAX_DEV         256     /* Max number of ports total */
+#define	CYZ_MAX_SPEED	921600
+
+#define	CYZ_FIFO_SIZE	16
+
+#define CYZ_BOOT_NWORDS 0x100
+struct CYZ_BOOT_CTRL {
+        unsigned short  nboard;
+        int             status[MAX_BOARD];
+        int             nchannel[MAX_BOARD];
+        int             fw_rev[MAX_BOARD];
+        unsigned long   offset;
+        unsigned long   data[CYZ_BOOT_NWORDS];
+};
+
+
+#ifndef DP_WINDOW_SIZE
+/*
+ *	Memory Window Sizes
+ */
+
+#define	DP_WINDOW_SIZE		(0x00080000)	/* window size 512 Kb */
+#define	ZE_DP_WINDOW_SIZE	(0x00100000)	/* window size 1 Mb (Ze and
+						  8Zo V.2 */
+#define	CTRL_WINDOW_SIZE	(0x00000080)	/* runtime regs 128 bytes */
+
+/*
+ *	CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver
+ *	normally will access only interested on the fpga_id, fpga_version,
+ *	start_cpu and stop_cpu.
+ */
+
+struct	CUSTOM_REG {
+	__u32	fpga_id;		/* FPGA Identification Register */
+	__u32	fpga_version;		/* FPGA Version Number Register */
+	__u32	cpu_start;		/* CPU start Register (write) */
+	__u32	cpu_stop;		/* CPU stop Register (write) */
+	__u32	misc_reg;		/* Miscellaneous Register */
+	__u32	idt_mode;		/* IDT mode Register */
+	__u32	uart_irq_status;	/* UART IRQ status Register */
+	__u32	clear_timer0_irq;	/* Clear timer interrupt Register */
+	__u32	clear_timer1_irq;	/* Clear timer interrupt Register */
+	__u32	clear_timer2_irq;	/* Clear timer interrupt Register */
+	__u32	test_register;		/* Test Register */
+	__u32	test_count;		/* Test Count Register */
+	__u32	timer_select;		/* Timer select register */
+	__u32	pr_uart_irq_status;	/* Prioritized UART IRQ stat Reg */
+	__u32	ram_wait_state;		/* RAM wait-state Register */
+	__u32	uart_wait_state;	/* UART wait-state Register */
+	__u32	timer_wait_state;	/* timer wait-state Register */
+	__u32	ack_wait_state;		/* ACK wait State Register */
+};
+
+/*
+ *	RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime
+ *	registers. This structure can be used to access the 9060 registers
+ *	(memory mapped).
+ */
+
+struct RUNTIME_9060 {
+	__u32	loc_addr_range;	/* 00h - Local Address Range */
+	__u32	loc_addr_base;	/* 04h - Local Address Base */
+	__u32	loc_arbitr;	/* 08h - Local Arbitration */
+	__u32	endian_descr;	/* 0Ch - Big/Little Endian Descriptor */
+	__u32	loc_rom_range;	/* 10h - Local ROM Range */
+	__u32	loc_rom_base;	/* 14h - Local ROM Base */
+	__u32	loc_bus_descr;	/* 18h - Local Bus descriptor */
+	__u32	loc_range_mst;	/* 1Ch - Local Range for Master to PCI */
+	__u32	loc_base_mst;	/* 20h - Local Base for Master PCI */
+	__u32	loc_range_io;	/* 24h - Local Range for Master IO */
+	__u32	pci_base_mst;	/* 28h - PCI Base for Master PCI */
+	__u32	pci_conf_io;	/* 2Ch - PCI configuration for Master IO */
+	__u32	filler1;	/* 30h */
+	__u32	filler2;	/* 34h */
+	__u32	filler3;	/* 38h */
+	__u32	filler4;	/* 3Ch */
+	__u32	mail_box_0;	/* 40h - Mail Box 0 */
+	__u32	mail_box_1;	/* 44h - Mail Box 1 */
+	__u32	mail_box_2;	/* 48h - Mail Box 2 */
+	__u32	mail_box_3;	/* 4Ch - Mail Box 3 */
+	__u32	filler5;	/* 50h */
+	__u32	filler6;	/* 54h */
+	__u32	filler7;	/* 58h */
+	__u32	filler8;	/* 5Ch */
+	__u32	pci_doorbell;	/* 60h - PCI to Local Doorbell */
+	__u32	loc_doorbell;	/* 64h - Local to PCI Doorbell */
+	__u32	intr_ctrl_stat;	/* 68h - Interrupt Control/Status */
+	__u32	init_ctrl;	/* 6Ch - EEPROM control, Init Control, etc */
+};
+
+/* Values for the Local Base Address re-map register */
+
+#define	WIN_RAM		0x00000001L	/* set the sliding window to RAM */
+#define	WIN_CREG	0x14000001L	/* set the window to custom Registers */
+
+/* Values timer select registers */
+
+#define	TIMER_BY_1M	0x00		/* clock divided by 1M */
+#define	TIMER_BY_256K	0x01		/* clock divided by 256k */
+#define	TIMER_BY_128K	0x02		/* clock divided by 128k */
+#define	TIMER_BY_32K	0x03		/* clock divided by 32k */
+
+/****************** ****************** *******************/
+#endif
+
+#ifndef ZFIRM_ID
+/* #include "zfwint.h" */
+/****************** ****************** *******************/
+/*
+ *	This file contains the definitions for interfacing with the
+ *	Cyclom-Z ZFIRM Firmware.
+ */
+
+/* General Constant definitions */
+
+#define	MAX_CHAN	64		/* max number of channels per board */
+
+/* firmware id structure (set after boot) */
+
+#define ID_ADDRESS	0x00000180L	/* signature/pointer address */
+#define	ZFIRM_ID	0x5557465AL	/* ZFIRM/U signature */
+#define	ZFIRM_HLT	0x59505B5CL	/* ZFIRM needs external power supply */
+#define	ZFIRM_RST	0x56040674L	/* RST signal (due to FW reset) */
+
+#define	ZF_TINACT_DEF	1000		/* default inactivity timeout 
+					   (1000 ms) */
+#define	ZF_TINACT	ZF_TINACT_DEF
+
+struct	FIRM_ID {
+	__u32	signature;		/* ZFIRM/U signature */
+	__u32	zfwctrl_addr;		/* pointer to ZFW_CTRL structure */
+};
+
+/* Op. System id */
+
+#define	C_OS_LINUX	0x00000030	/* generic Linux system */
+
+/* channel op_mode */
+
+#define	C_CH_DISABLE	0x00000000	/* channel is disabled */
+#define	C_CH_TXENABLE	0x00000001	/* channel Tx enabled */
+#define	C_CH_RXENABLE	0x00000002	/* channel Rx enabled */
+#define	C_CH_ENABLE	0x00000003	/* channel Tx/Rx enabled */
+#define	C_CH_LOOPBACK	0x00000004	/* Loopback mode */
+
+/* comm_parity - parity */
+
+#define	C_PR_NONE	0x00000000	/* None */
+#define	C_PR_ODD	0x00000001	/* Odd */
+#define C_PR_EVEN	0x00000002	/* Even */
+#define C_PR_MARK	0x00000004	/* Mark */
+#define C_PR_SPACE	0x00000008	/* Space */
+#define C_PR_PARITY	0x000000ff
+
+#define	C_PR_DISCARD	0x00000100	/* discard char with frame/par error */
+#define C_PR_IGNORE	0x00000200	/* ignore frame/par error */
+
+/* comm_data_l - data length and stop bits */
+
+#define C_DL_CS5	0x00000001
+#define C_DL_CS6	0x00000002
+#define C_DL_CS7	0x00000004
+#define C_DL_CS8	0x00000008
+#define	C_DL_CS		0x0000000f
+#define C_DL_1STOP	0x00000010
+#define C_DL_15STOP	0x00000020
+#define C_DL_2STOP	0x00000040
+#define	C_DL_STOP	0x000000f0
+
+/* interrupt enabling/status */
+
+#define	C_IN_DISABLE	0x00000000	/* zero, disable interrupts */
+#define	C_IN_TXBEMPTY	0x00000001	/* tx buffer empty */
+#define	C_IN_TXLOWWM	0x00000002	/* tx buffer below LWM */
+#define	C_IN_RXHIWM	0x00000010	/* rx buffer above HWM */
+#define	C_IN_RXNNDT	0x00000020	/* rx no new data timeout */
+#define	C_IN_MDCD	0x00000100	/* modem DCD change */
+#define	C_IN_MDSR	0x00000200	/* modem DSR change */
+#define	C_IN_MRI	0x00000400	/* modem RI change */
+#define	C_IN_MCTS	0x00000800	/* modem CTS change */
+#define	C_IN_RXBRK	0x00001000	/* Break received */
+#define	C_IN_PR_ERROR	0x00002000	/* parity error */
+#define	C_IN_FR_ERROR	0x00004000	/* frame error */
+#define C_IN_OVR_ERROR  0x00008000      /* overrun error */
+#define C_IN_RXOFL	0x00010000      /* RX buffer overflow */
+#define C_IN_IOCTLW	0x00020000      /* I/O control w/ wait */
+#define C_IN_MRTS	0x00040000	/* modem RTS drop */
+#define C_IN_ICHAR	0x00080000
+ 
+/* flow control */
+
+#define	C_FL_OXX	0x00000001	/* output Xon/Xoff flow control */
+#define	C_FL_IXX	0x00000002	/* output Xon/Xoff flow control */
+#define C_FL_OIXANY	0x00000004	/* output Xon/Xoff (any xon) */
+#define	C_FL_SWFLOW	0x0000000f
+
+/* flow status */
+
+#define	C_FS_TXIDLE	0x00000000	/* no Tx data in the buffer or UART */
+#define	C_FS_SENDING	0x00000001	/* UART is sending data */
+#define	C_FS_SWFLOW	0x00000002	/* Tx is stopped by received Xoff */
+
+/* rs_control/rs_status RS-232 signals */
+
+#define C_RS_PARAM	0x80000000	/* Indicates presence of parameter in 
+					   IOCTLM command */
+#define	C_RS_RTS	0x00000001	/* RTS */
+#define	C_RS_DTR	0x00000004	/* DTR */
+#define	C_RS_DCD	0x00000100	/* CD */
+#define	C_RS_DSR	0x00000200	/* DSR */
+#define	C_RS_RI		0x00000400	/* RI */
+#define	C_RS_CTS	0x00000800	/* CTS */
+
+/* commands Host <-> Board */
+
+#define	C_CM_RESET	0x01		/* reset/flush buffers */
+#define	C_CM_IOCTL	0x02		/* re-read CH_CTRL */
+#define	C_CM_IOCTLW	0x03		/* re-read CH_CTRL, intr when done */
+#define	C_CM_IOCTLM	0x04		/* RS-232 outputs change */
+#define	C_CM_SENDXOFF	0x10		/* send Xoff */
+#define	C_CM_SENDXON	0x11		/* send Xon */
+#define C_CM_CLFLOW	0x12		/* Clear flow control (resume) */
+#define	C_CM_SENDBRK	0x41		/* send break */
+#define	C_CM_INTBACK	0x42		/* Interrupt back */
+#define	C_CM_SET_BREAK	0x43		/* Tx break on */
+#define	C_CM_CLR_BREAK	0x44		/* Tx break off */
+#define	C_CM_CMD_DONE	0x45		/* Previous command done */
+#define C_CM_INTBACK2	0x46		/* Alternate Interrupt back */
+#define	C_CM_TINACT	0x51		/* set inactivity detection */
+#define	C_CM_IRQ_ENBL	0x52		/* enable generation of interrupts */
+#define	C_CM_IRQ_DSBL	0x53		/* disable generation of interrupts */
+#define	C_CM_ACK_ENBL	0x54		/* enable acknowledged interrupt mode */
+#define	C_CM_ACK_DSBL	0x55		/* disable acknowledged intr mode */
+#define	C_CM_FLUSH_RX	0x56		/* flushes Rx buffer */
+#define	C_CM_FLUSH_TX	0x57		/* flushes Tx buffer */
+#define C_CM_Q_ENABLE	0x58		/* enables queue access from the 
+					   driver */
+#define C_CM_Q_DISABLE  0x59            /* disables queue access from the 
+					   driver */
+
+#define	C_CM_TXBEMPTY	0x60		/* Tx buffer is empty */
+#define	C_CM_TXLOWWM	0x61		/* Tx buffer low water mark */
+#define	C_CM_RXHIWM	0x62		/* Rx buffer high water mark */
+#define	C_CM_RXNNDT	0x63		/* rx no new data timeout */
+#define	C_CM_TXFEMPTY	0x64
+#define	C_CM_ICHAR	0x65
+#define	C_CM_MDCD	0x70		/* modem DCD change */
+#define	C_CM_MDSR	0x71		/* modem DSR change */
+#define	C_CM_MRI	0x72		/* modem RI change */
+#define	C_CM_MCTS	0x73		/* modem CTS change */
+#define C_CM_MRTS	0x74		/* modem RTS drop */
+#define	C_CM_RXBRK	0x84		/* Break received */
+#define	C_CM_PR_ERROR	0x85		/* Parity error */
+#define	C_CM_FR_ERROR	0x86		/* Frame error */
+#define C_CM_OVR_ERROR  0x87            /* Overrun error */
+#define C_CM_RXOFL	0x88            /* RX buffer overflow */
+#define	C_CM_CMDERROR	0x90		/* command error */
+#define	C_CM_FATAL	0x91		/* fatal error */
+#define	C_CM_HW_RESET	0x92		/* reset board */
+
+/*
+ *	CH_CTRL - This per port structure contains all parameters
+ *	that control an specific port. It can be seen as the
+ *	configuration registers of a "super-serial-controller".
+ */
+
+struct CH_CTRL {
+	__u32	op_mode;	/* operation mode */
+	__u32	intr_enable;	/* interrupt masking */
+	__u32	sw_flow;	/* SW flow control */
+	__u32	flow_status;	/* output flow status */
+	__u32	comm_baud;	/* baud rate  - numerically specified */
+	__u32	comm_parity;	/* parity */
+	__u32	comm_data_l;	/* data length/stop */
+	__u32	comm_flags;	/* other flags */
+	__u32	hw_flow;	/* HW flow control */
+	__u32	rs_control;	/* RS-232 outputs */
+	__u32	rs_status;	/* RS-232 inputs */
+	__u32	flow_xon;	/* xon char */
+	__u32	flow_xoff;	/* xoff char */
+	__u32	hw_overflow;	/* hw overflow counter */
+	__u32	sw_overflow;	/* sw overflow counter */
+	__u32	comm_error;	/* frame/parity error counter */
+	__u32 ichar;
+	__u32 filler[7];
+};
+
+
+/*
+ *	BUF_CTRL - This per channel structure contains
+ *	all Tx and Rx buffer control for a given channel.
+ */
+
+struct	BUF_CTRL	{
+	__u32	flag_dma;	/* buffers are in Host memory */
+	__u32	tx_bufaddr;	/* address of the tx buffer */
+	__u32	tx_bufsize;	/* tx buffer size */
+	__u32	tx_threshold;	/* tx low water mark */
+	__u32	tx_get;		/* tail index tx buf */
+	__u32	tx_put;		/* head index tx buf */
+	__u32	rx_bufaddr;	/* address of the rx buffer */
+	__u32	rx_bufsize;	/* rx buffer size */
+	__u32	rx_threshold;	/* rx high water mark */
+	__u32	rx_get;		/* tail index rx buf */
+	__u32	rx_put;		/* head index rx buf */
+	__u32	filler[5];	/* filler to align structures */
+};
+
+/*
+ *	BOARD_CTRL - This per board structure contains all global 
+ *	control fields related to the board.
+ */
+
+struct BOARD_CTRL {
+
+	/* static info provided by the on-board CPU */
+	__u32	n_channel;	/* number of channels */
+	__u32	fw_version;	/* firmware version */
+
+	/* static info provided by the driver */
+	__u32	op_system;	/* op_system id */
+	__u32	dr_version;	/* driver version */
+
+	/* board control area */
+	__u32	inactivity;	/* inactivity control */
+
+	/* host to FW commands */
+	__u32	hcmd_channel;	/* channel number */
+	__u32	hcmd_param;	/* pointer to parameters */
+
+	/* FW to Host commands */
+	__u32	fwcmd_channel;	/* channel number */
+	__u32	fwcmd_param;	/* pointer to parameters */
+	__u32	zf_int_queue_addr; /* offset for INT_QUEUE structure */
+
+	/* filler so the structures are aligned */
+	__u32	filler[6];
+};
+
+/* Host Interrupt Queue */
+
+#define QUEUE_SIZE	(10*MAX_CHAN)
+
+struct	INT_QUEUE {
+	unsigned char	intr_code[QUEUE_SIZE];
+	unsigned long	channel[QUEUE_SIZE];
+	unsigned long	param[QUEUE_SIZE];
+	unsigned long	put;
+	unsigned long	get;
+};
+
+/*
+ *	ZFW_CTRL - This is the data structure that includes all other
+ *	data structures used by the Firmware.
+ */
+ 
+struct ZFW_CTRL {
+	struct BOARD_CTRL	board_ctrl;
+	struct CH_CTRL		ch_ctrl[MAX_CHAN];
+	struct BUF_CTRL		buf_ctrl[MAX_CHAN];
+};
+
+/****************** ****************** *******************/
+#endif
+
+#ifdef __KERNEL__
+
+/* Per card data structure */
+struct cyclades_card {
+	void __iomem *base_addr;
+	union {
+		void __iomem *p9050;
+		struct RUNTIME_9060 __iomem *p9060;
+	} ctl_addr;
+	struct BOARD_CTRL __iomem *board_ctrl;	/* cyz specific */
+	int irq;
+	unsigned int num_chips;	/* 0 if card absent, -1 if Z/PCI, else Y */
+	unsigned int first_line;	/* minor number of first channel on card */
+	unsigned int nports;	/* Number of ports in the card */
+	int bus_index;		/* address shift - 0 for ISA, 1 for PCI */
+	int intr_enabled;		/* FW Interrupt flag - 0 disabled, 1 enabled */
+	u32 hw_ver;
+	spinlock_t card_lock;
+	struct cyclades_port *ports;
+};
+
+/***************************************
+ * Memory access functions/macros      *
+ * (required to support Alpha systems) *
+ ***************************************/
+
+#define cy_writeb(port,val)     do { writeb((val), (port)); mb(); } while (0)
+#define cy_writew(port,val)     do { writew((val), (port)); mb(); } while (0)
+#define cy_writel(port,val)     do { writel((val), (port)); mb(); } while (0)
+
+/*
+ * Statistics counters
+ */
+struct cyclades_icount {
+	__u32	cts, dsr, rng, dcd, tx, rx;
+	__u32	frame, parity, overrun, brk;
+	__u32	buf_overrun;
+};
+
+/*
+ * This is our internal structure for each serial port's state.
+ * 
+ * Many fields are paralleled by the structure used by the serial_struct
+ * structure.
+ *
+ * For definitions of the flags field, see tty.h
+ */
+
+struct cyclades_port {
+	int                     magic;
+	struct tty_port		port;
+	struct cyclades_card	*card;
+	union {
+		struct {
+			void __iomem *base_addr;
+		} cyy;
+		struct {
+			struct CH_CTRL __iomem	*ch_ctrl;
+			struct BUF_CTRL __iomem	*buf_ctrl;
+		} cyz;
+	} u;
+	int			line;
+	int			flags; 		/* defined in tty.h */
+	int                     type;		/* UART type */
+	int			read_status_mask;
+	int			ignore_status_mask;
+	int			timeout;
+	int			xmit_fifo_size;
+	int                     cor1,cor2,cor3,cor4,cor5;
+	int                     tbpr,tco,rbpr,rco;
+	int			baud;
+	int			rflow;
+	int			rtsdtr_inv;
+	int			chip_rev;
+	int			custom_divisor;
+	u8			x_char; /* to be pushed out ASAP */
+	int                     breakon;
+	int                     breakoff;
+	int			xmit_head;
+	int			xmit_tail;
+	int			xmit_cnt;
+        int                     default_threshold;
+        int                     default_timeout;
+	unsigned long		rflush_count;
+	struct cyclades_monitor	mon;
+	struct cyclades_idle_stats	idle_stats;
+	struct cyclades_icount	icount;
+	struct completion       shutdown_wait;
+	int throttle;
+};
+
+#define	CLOSING_WAIT_DELAY	30*HZ
+#define CY_CLOSING_WAIT_NONE	ASYNC_CLOSING_WAIT_NONE
+#define CY_CLOSING_WAIT_INF	ASYNC_CLOSING_WAIT_INF
+
+
+#define CyMAX_CHIPS_PER_CARD	8
+#define CyMAX_CHAR_FIFO		12
+#define CyPORTS_PER_CHIP	4
+#define	CD1400_MAX_SPEED	115200
+
+#define	CyISA_Ywin	0x2000
+
+#define CyPCI_Ywin 	0x4000
+#define CyPCI_Yctl 	0x80
+#define CyPCI_Zctl 	CTRL_WINDOW_SIZE
+#define CyPCI_Zwin 	0x80000
+#define CyPCI_Ze_win 	(2 * CyPCI_Zwin)
+
+#define PCI_DEVICE_ID_MASK	0x06
+
+/**** CD1400 registers ****/
+
+#define CD1400_REV_G	0x46
+#define CD1400_REV_J	0x48
+
+#define CyRegSize  	0x0400
+#define Cy_HwReset 	0x1400
+#define Cy_ClrIntr 	0x1800
+#define Cy_EpldRev 	0x1e00
+
+/* Global Registers */
+
+#define CyGFRCR		(0x40*2)
+#define      CyRevE		(44)
+#define CyCAR		(0x68*2)
+#define      CyCHAN_0		(0x00)
+#define      CyCHAN_1		(0x01)
+#define      CyCHAN_2		(0x02)
+#define      CyCHAN_3		(0x03)
+#define CyGCR		(0x4B*2)
+#define      CyCH0_SERIAL	(0x00)
+#define      CyCH0_PARALLEL	(0x80)
+#define CySVRR		(0x67*2)
+#define      CySRModem		(0x04)
+#define      CySRTransmit	(0x02)
+#define      CySRReceive	(0x01)
+#define CyRICR		(0x44*2)
+#define CyTICR		(0x45*2)
+#define CyMICR		(0x46*2)
+#define      CyICR0		(0x00)
+#define      CyICR1		(0x01)
+#define      CyICR2		(0x02)
+#define      CyICR3		(0x03)
+#define CyRIR		(0x6B*2)
+#define CyTIR		(0x6A*2)
+#define CyMIR		(0x69*2)
+#define      CyIRDirEq		(0x80)
+#define      CyIRBusy		(0x40)
+#define      CyIRUnfair		(0x20)
+#define      CyIRContext	(0x1C)
+#define      CyIRChannel	(0x03)
+#define CyPPR 		(0x7E*2)
+#define      CyCLOCK_20_1MS	(0x27)
+#define      CyCLOCK_25_1MS	(0x31)
+#define      CyCLOCK_25_5MS	(0xf4)
+#define      CyCLOCK_60_1MS	(0x75)
+#define      CyCLOCK_60_2MS	(0xea)
+
+/* Virtual Registers */
+
+#define CyRIVR		(0x43*2)
+#define CyTIVR		(0x42*2)
+#define CyMIVR		(0x41*2)
+#define      CyIVRMask (0x07)
+#define      CyIVRRxEx (0x07)
+#define      CyIVRRxOK (0x03)
+#define      CyIVRTxOK (0x02)
+#define      CyIVRMdmOK (0x01)
+#define CyTDR		(0x63*2)
+#define CyRDSR		(0x62*2)
+#define      CyTIMEOUT		(0x80)
+#define      CySPECHAR		(0x70)
+#define      CyBREAK		(0x08)
+#define      CyPARITY		(0x04)
+#define      CyFRAME		(0x02)
+#define      CyOVERRUN		(0x01)
+#define CyMISR		(0x4C*2)
+/* see CyMCOR_ and CyMSVR_ for bits*/
+#define CyEOSRR		(0x60*2)
+
+/* Channel Registers */
+
+#define CyLIVR		(0x18*2)
+#define      CyMscsr		(0x01)
+#define      CyTdsr		(0x02)
+#define      CyRgdsr		(0x03)
+#define      CyRedsr		(0x07)
+#define CyCCR		(0x05*2)
+/* Format 1 */
+#define      CyCHAN_RESET	(0x80)
+#define      CyCHIP_RESET	(0x81)
+#define      CyFlushTransFIFO	(0x82)
+/* Format 2 */
+#define      CyCOR_CHANGE	(0x40)
+#define      CyCOR1ch		(0x02)
+#define      CyCOR2ch		(0x04)
+#define      CyCOR3ch		(0x08)
+/* Format 3 */
+#define      CySEND_SPEC_1	(0x21)
+#define      CySEND_SPEC_2	(0x22)
+#define      CySEND_SPEC_3	(0x23)
+#define      CySEND_SPEC_4	(0x24)
+/* Format 4 */
+#define      CyCHAN_CTL		(0x10)
+#define      CyDIS_RCVR		(0x01)
+#define      CyENB_RCVR		(0x02)
+#define      CyDIS_XMTR		(0x04)
+#define      CyENB_XMTR		(0x08)
+#define CySRER		(0x06*2)
+#define      CyMdmCh		(0x80)
+#define      CyRxData		(0x10)
+#define      CyTxRdy		(0x04)
+#define      CyTxMpty		(0x02)
+#define      CyNNDT		(0x01)
+#define CyCOR1		(0x08*2)
+#define      CyPARITY_NONE	(0x00)
+#define      CyPARITY_0		(0x20)
+#define      CyPARITY_1		(0xA0)
+#define      CyPARITY_E		(0x40)
+#define      CyPARITY_O		(0xC0)
+#define      Cy_1_STOP		(0x00)
+#define      Cy_1_5_STOP	(0x04)
+#define      Cy_2_STOP		(0x08)
+#define      Cy_5_BITS		(0x00)
+#define      Cy_6_BITS		(0x01)
+#define      Cy_7_BITS		(0x02)
+#define      Cy_8_BITS		(0x03)
+#define CyCOR2		(0x09*2)
+#define      CyIXM		(0x80)
+#define      CyTxIBE		(0x40)
+#define      CyETC		(0x20)
+#define      CyAUTO_TXFL	(0x60)
+#define      CyLLM		(0x10)
+#define      CyRLM		(0x08)
+#define      CyRtsAO		(0x04)
+#define      CyCtsAE		(0x02)
+#define      CyDsrAE		(0x01)
+#define CyCOR3		(0x0A*2)
+#define      CySPL_CH_DRANGE	(0x80)  /* special character detect range */
+#define      CySPL_CH_DET1	(0x40)  /* enable special character detection
+                                                               on SCHR4-SCHR3 */
+#define      CyFL_CTRL_TRNSP	(0x20)  /* Flow Control Transparency */
+#define      CySPL_CH_DET2	(0x10)  /* Enable special character detection
+                                                               on SCHR2-SCHR1 */
+#define      CyREC_FIFO		(0x0F)  /* Receive FIFO threshold */
+#define CyCOR4		(0x1E*2)
+#define CyCOR5		(0x1F*2)
+#define CyCCSR		(0x0B*2)
+#define      CyRxEN		(0x80)
+#define      CyRxFloff		(0x40)
+#define      CyRxFlon		(0x20)
+#define      CyTxEN		(0x08)
+#define      CyTxFloff		(0x04)
+#define      CyTxFlon		(0x02)
+#define CyRDCR		(0x0E*2)
+#define CySCHR1		(0x1A*2)
+#define CySCHR2 	(0x1B*2)
+#define CySCHR3		(0x1C*2)
+#define CySCHR4		(0x1D*2)
+#define CySCRL		(0x22*2)
+#define CySCRH		(0x23*2)
+#define CyLNC		(0x24*2)
+#define CyMCOR1 	(0x15*2)
+#define CyMCOR2		(0x16*2)
+#define CyRTPR		(0x21*2)
+#define CyMSVR1		(0x6C*2)
+#define CyMSVR2		(0x6D*2)
+#define      CyANY_DELTA	(0xF0)
+#define      CyDSR		(0x80)
+#define      CyCTS		(0x40)
+#define      CyRI		(0x20)
+#define      CyDCD		(0x10)
+#define      CyDTR              (0x02)
+#define      CyRTS              (0x01)
+#define CyPVSR		(0x6F*2)
+#define CyRBPR		(0x78*2)
+#define CyRCOR		(0x7C*2)
+#define CyTBPR		(0x72*2)
+#define CyTCOR		(0x76*2)
+
+/* Custom Registers */
+
+#define	CyPLX_VER	(0x3400)
+#define	PLX_9050	0x0b
+#define	PLX_9060	0x0c
+#define	PLX_9080	0x0d
+
+/***************************************************************************/
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_CYCLADES_H */
diff --git a/include/linux/cyclomx.h b/include/linux/cyclomx.h
new file mode 100644
index 00000000..b88f7f42
--- /dev/null
+++ b/include/linux/cyclomx.h
@@ -0,0 +1,77 @@
+#ifndef	_CYCLOMX_H
+#define	_CYCLOMX_H
+/*
+* cyclomx.h	Cyclom 2X WAN Link Driver.
+*		User-level API definitions.
+*
+* Author:	Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+*
+* Copyright:	(c) 1998-2003 Arnaldo Carvalho de Melo
+*
+* Based on wanpipe.h by Gene Kozin <genek@compuserve.com>
+*
+*		This program is free software; you can redistribute it and/or
+*		modify it under the terms of the GNU General Public License
+*		as published by the Free Software Foundation; either version
+*		2 of the License, or (at your option) any later version.
+* ============================================================================
+* 2000/07/13    acme		remove crap #if KERNEL_VERSION > blah
+* 2000/01/21    acme            rename cyclomx_open to cyclomx_mod_inc_use_count
+*                               and cyclomx_close to cyclomx_mod_dec_use_count
+* 1999/05/19	acme		wait_queue_head_t wait_stats(support for 2.3.*)
+* 1999/01/03	acme		judicious use of data types
+* 1998/12/27	acme		cleanup: PACKED not needed
+* 1998/08/08	acme		Version 0.0.1
+*/
+
+#include <linux/wanrouter.h>
+#include <linux/spinlock.h>
+
+#ifdef	__KERNEL__
+/* Kernel Interface */
+
+#include <linux/cycx_drv.h>	/* Cyclom 2X support module API definitions */
+#include <linux/cycx_cfm.h>	/* Cyclom 2X firmware module definitions */
+#ifdef CONFIG_CYCLOMX_X25
+#include <linux/cycx_x25.h>
+#endif
+
+/* Adapter Data Space.
+ * This structure is needed because we handle multiple cards, otherwise
+ * static data would do it.
+ */
+struct cycx_device {
+	char devname[WAN_DRVNAME_SZ + 1];/* card name */
+	struct cycx_hw hw;		/* hardware configuration */
+	struct wan_device wandev;	/* WAN device data space */
+	u32 state_tick;			/* link state timestamp */
+	spinlock_t lock;
+	char in_isr;			/* interrupt-in-service flag */
+	char buff_int_mode_unbusy;      /* flag for carrying out dev_tint */
+	wait_queue_head_t wait_stats;  /* to wait for the STATS indication */
+	void __iomem *mbox;			/* -> mailbox */
+	void (*isr)(struct cycx_device* card);	/* interrupt service routine */
+	int (*exec)(struct cycx_device* card, void* u_cmd, void* u_data);
+	union {
+#ifdef CONFIG_CYCLOMX_X25
+		struct { /* X.25 specific data */
+			u32 lo_pvc;
+			u32 hi_pvc;
+			u32 lo_svc;
+			u32 hi_svc;
+			struct cycx_x25_stats stats;
+			spinlock_t lock;
+			u32 connection_keys;
+		} x;
+#endif
+	} u;
+};
+
+/* Public Functions */
+void cycx_set_state(struct cycx_device *card, int state);
+
+#ifdef CONFIG_CYCLOMX_X25
+int cycx_x25_wan_init(struct cycx_device *card, wandev_conf_t *conf);
+#endif
+#endif	/* __KERNEL__ */
+#endif	/* _CYCLOMX_H */
diff --git a/include/linux/cycx_cfm.h b/include/linux/cycx_cfm.h
new file mode 100644
index 00000000..032d26ed
--- /dev/null
+++ b/include/linux/cycx_cfm.h
@@ -0,0 +1,101 @@
+/*
+* cycx_cfm.h	Cyclom 2X WAN Link Driver.
+*		Definitions for the Cyclom 2X Firmware Module (CFM).
+*
+* Author:	Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+*
+* Copyright:	(c) 1998-2003 Arnaldo Carvalho de Melo
+*
+* Based on sdlasfm.h by Gene Kozin <74604.152@compuserve.com>
+*
+*		This program is free software; you can redistribute it and/or
+*		modify it under the terms of the GNU General Public License
+*		as published by the Free Software Foundation; either version
+*		2 of the License, or (at your option) any later version.
+* ============================================================================
+* 1998/08/08	acme		Initial version.
+*/
+#ifndef	_CYCX_CFM_H
+#define	_CYCX_CFM_H
+
+/* Defines */
+
+#define	CFM_VERSION	2
+#define	CFM_SIGNATURE	"CFM - Cyclades CYCX Firmware Module"
+
+/* min/max */
+#define	CFM_IMAGE_SIZE	0x20000	/* max size of CYCX code image file */
+#define	CFM_DESCR_LEN	256	/* max length of description string */
+#define	CFM_MAX_CYCX	1	/* max number of compatible adapters */
+#define	CFM_LOAD_BUFSZ	0x400	/* buffer size for reset code (buffer_load) */
+
+/* Firmware Commands */
+#define GEN_POWER_ON	0x1280
+
+#define GEN_SET_SEG	0x1401	/* boot segment setting. */
+#define GEN_BOOT_DAT	0x1402	/* boot data. */
+#define GEN_START	0x1403	/* board start. */
+#define GEN_DEFPAR	0x1404	/* buffer length for boot. */
+
+/* Adapter Types */
+#define CYCX_2X		2
+/* for now only the 2X is supported, no plans to support 8X or 16X */
+#define CYCX_8X		8
+#define CYCX_16X	16
+
+#define	CFID_X25_2X	5200
+
+/**
+ *	struct cycx_fw_info - firmware module information.
+ *	@codeid - firmware ID
+ *	@version - firmware version number
+ *	@adapter - compatible adapter types
+ *	@memsize - minimum memory size
+ *	@reserved - reserved
+ *	@startoffs - entry point offset
+ *	@winoffs - dual-port memory window offset
+ *	@codeoffs - code load offset
+ *	@codesize - code size
+ *	@dataoffs - configuration data load offset
+ *	@datasize - configuration data size
+ */
+struct cycx_fw_info {
+	unsigned short	codeid;
+	unsigned short	version;
+	unsigned short	adapter[CFM_MAX_CYCX];
+	unsigned long	memsize;
+	unsigned short	reserved[2];
+	unsigned short	startoffs;
+	unsigned short	winoffs;
+	unsigned short	codeoffs;
+	unsigned long	codesize;
+	unsigned short	dataoffs;
+	unsigned long	datasize;
+};
+
+/**
+ *	struct cycx_firmware - CYCX firmware file structure
+ *	@signature - CFM file signature
+ *	@version - file format version
+ *	@checksum - info + image
+ *	@reserved - reserved
+ *	@descr - description string
+ *	@info - firmware module info
+ *	@image - code image (variable size)
+ */
+struct cycx_firmware {
+	char		    signature[80];
+	unsigned short	    version;
+	unsigned short	    checksum;
+	unsigned short	    reserved[6];
+	char		    descr[CFM_DESCR_LEN];
+	struct cycx_fw_info info;
+	unsigned char	    image[0];
+};
+
+struct cycx_fw_header {
+	unsigned long  reset_size;
+	unsigned long  data_size;
+	unsigned long  code_size;
+};
+#endif	/* _CYCX_CFM_H */
diff --git a/include/linux/cycx_drv.h b/include/linux/cycx_drv.h
new file mode 100644
index 00000000..12fe6b0b
--- /dev/null
+++ b/include/linux/cycx_drv.h
@@ -0,0 +1,64 @@
+/*
+* cycx_drv.h	CYCX Support Module.  Kernel API Definitions.
+*
+* Author:	Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+*
+* Copyright:	(c) 1998-2003 Arnaldo Carvalho de Melo
+*
+* Based on sdladrv.h by Gene Kozin <genek@compuserve.com>
+*
+*		This program is free software; you can redistribute it and/or
+*		modify it under the terms of the GNU General Public License
+*		as published by the Free Software Foundation; either version
+*		2 of the License, or (at your option) any later version.
+* ============================================================================
+* 1999/10/23	acme		cycxhw_t cleanup
+* 1999/01/03	acme		more judicious use of data types...
+*				uclong, ucchar, etc deleted, the u8, u16, u32
+*				types are the portable way to go.
+* 1999/01/03	acme		judicious use of data types... u16, u32, etc
+* 1998/12/26	acme	 	FIXED_BUFFERS, CONF_OFFSET,
+*                               removal of cy_read{bwl}
+* 1998/08/08	acme	 	Initial version.
+*/
+#ifndef	_CYCX_DRV_H
+#define	_CYCX_DRV_H
+
+#define	CYCX_WINDOWSIZE	0x4000	/* default dual-port memory window size */
+#define	GEN_CYCX_INTR	0x02
+#define	RST_ENABLE	0x04
+#define	START_CPU	0x06
+#define	RST_DISABLE	0x08
+#define	FIXED_BUFFERS	0x08
+#define	TEST_PATTERN	0xaa55
+#define	CMD_OFFSET	0x20
+#define CONF_OFFSET     0x0380
+#define	RESET_OFFSET	0x3c00	/* For reset file load */
+#define	DATA_OFFSET	0x0100	/* For code and data files load */
+#define	START_OFFSET	0x3ff0	/* 80186 starts here */
+
+/**
+ *	struct cycx_hw - Adapter hardware configuration
+ *	@fwid - firmware ID
+ *	@irq - interrupt request level
+ *	@dpmbase - dual-port memory base
+ *	@dpmsize - dual-port memory size
+ *	@reserved - reserved for future use
+ */
+struct cycx_hw {
+	u32 fwid;
+	int irq;
+	void __iomem *dpmbase;
+	u32 dpmsize;
+	u32 reserved[5];
+};
+
+/* Function Prototypes */
+extern int cycx_setup(struct cycx_hw *hw, void *sfm, u32 len, unsigned long base);
+extern int cycx_down(struct cycx_hw *hw);
+extern int cycx_peek(struct cycx_hw *hw, u32 addr, void *buf, u32 len);
+extern int cycx_poke(struct cycx_hw *hw, u32 addr, void *buf, u32 len);
+extern int cycx_exec(void __iomem *addr);
+
+extern void cycx_intr(struct cycx_hw *hw);
+#endif	/* _CYCX_DRV_H */
diff --git a/include/linux/cycx_x25.h b/include/linux/cycx_x25.h
new file mode 100644
index 00000000..362bf19d
--- /dev/null
+++ b/include/linux/cycx_x25.h
@@ -0,0 +1,125 @@
+#ifndef	_CYCX_X25_H
+#define	_CYCX_X25_H
+/*
+* cycx_x25.h	Cyclom X.25 firmware API definitions.
+*
+* Author:	Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+*
+* Copyright:	(c) 1998-2003 Arnaldo Carvalho de Melo
+*
+* Based on sdla_x25.h by Gene Kozin <74604.152@compuserve.com>
+*
+*		This program is free software; you can redistribute it and/or
+*		modify it under the terms of the GNU General Public License
+*		as published by the Free Software Foundation; either version
+*		2 of the License, or (at your option) any later version.
+* ============================================================================
+* 2000/04/02	acme		dprintk and cycx_debug
+* 1999/01/03	acme		judicious use of data types
+* 1999/01/02	acme		#define X25_ACK_N3	0x4411
+* 1998/12/28	acme		cleanup: lot'o'things removed
+*					 commands listed,
+*					 TX25Cmd & TX25Config structs
+*					 typedef'ed
+*/
+#ifndef PACKED
+#define PACKED __attribute__((packed))
+#endif 
+
+/* X.25 shared memory layout. */
+#define	X25_MBOX_OFFS	0x300	/* general mailbox block */
+#define	X25_RXMBOX_OFFS	0x340	/* receive mailbox */
+
+/* Debug */
+#define dprintk(level, format, a...) if (cycx_debug >= level) printk(format, ##a)
+
+extern unsigned int cycx_debug;
+
+/* Data Structures */
+/* X.25 Command Block. */
+struct cycx_x25_cmd {
+	u16 command;
+	u16 link;	/* values: 0 or 1 */
+	u16 len;	/* values: 0 thru 0x205 (517) */
+	u32 buf;
+} PACKED;
+
+/* Defines for the 'command' field. */
+#define X25_CONNECT_REQUEST             0x4401
+#define X25_CONNECT_RESPONSE            0x4402
+#define X25_DISCONNECT_REQUEST          0x4403
+#define X25_DISCONNECT_RESPONSE         0x4404
+#define X25_DATA_REQUEST                0x4405
+#define X25_ACK_TO_VC			0x4406
+#define X25_INTERRUPT_RESPONSE          0x4407
+#define X25_CONFIG                      0x4408
+#define X25_CONNECT_INDICATION          0x4409
+#define X25_CONNECT_CONFIRM             0x440A
+#define X25_DISCONNECT_INDICATION       0x440B
+#define X25_DISCONNECT_CONFIRM          0x440C
+#define X25_DATA_INDICATION             0x440E
+#define X25_INTERRUPT_INDICATION        0x440F
+#define X25_ACK_FROM_VC			0x4410
+#define X25_ACK_N3			0x4411
+#define X25_CONNECT_COLLISION           0x4413
+#define X25_N3WIN                       0x4414
+#define X25_LINE_ON                     0x4415
+#define X25_LINE_OFF                    0x4416
+#define X25_RESET_REQUEST               0x4417
+#define X25_LOG                         0x4500
+#define X25_STATISTIC                   0x4600
+#define X25_TRACE                       0x4700
+#define X25_N2TRACEXC                   0x4702
+#define X25_N3TRACEXC                   0x4703
+
+/**
+ *	struct cycx_x25_config - cyclom2x x25 firmware configuration
+ *	@link - link number
+ *	@speed - line speed
+ *	@clock - internal/external
+ *	@n2 - # of level 2 retransm.(values: 1 thru FF)
+ *	@n2win - level 2 window (values: 1 thru 7)
+ *	@n3win - level 3 window (values: 1 thru 7)
+ *	@nvc - # of logical channels (values: 1 thru 64)
+ *	@pktlen - level 3 packet length - log base 2 of size
+ *	@locaddr - my address
+ *	@remaddr - remote address
+ *	@t1 - time, in seconds
+ *	@t2 - time, in seconds
+ *	@t21 - time, in seconds
+ *	@npvc - # of permanent virt. circuits (1 thru nvc)
+ *	@t23 - time, in seconds
+ *	@flags - see dosx25.doc, in portuguese, for details
+ */
+struct cycx_x25_config {
+	u8  link;
+	u8  speed;
+	u8  clock;
+	u8  n2;
+	u8  n2win;
+	u8  n3win;
+	u8  nvc;
+	u8  pktlen;
+	u8  locaddr;
+	u8  remaddr;
+	u16 t1;
+	u16 t2;
+	u8  t21;
+	u8  npvc;
+	u8  t23;
+	u8  flags;
+} PACKED;
+
+struct cycx_x25_stats {
+	u16 rx_crc_errors;
+	u16 rx_over_errors;
+	u16 n2_tx_frames;
+	u16 n2_rx_frames;
+	u16 tx_timeouts;
+	u16 rx_timeouts;
+	u16 n3_tx_packets;
+	u16 n3_rx_packets;
+	u16 tx_aborts;
+	u16 rx_aborts;
+} PACKED;
+#endif	/* _CYCX_X25_H */
diff --git a/include/linux/davinci_emac.h b/include/linux/davinci_emac.h
new file mode 100644
index 00000000..54288850
--- /dev/null
+++ b/include/linux/davinci_emac.h
@@ -0,0 +1,50 @@
+/*
+ * TI DaVinci EMAC platform support
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef _LINUX_DAVINCI_EMAC_H
+#define _LINUX_DAVINCI_EMAC_H
+
+#include <linux/if_ether.h>
+#include <linux/memory.h>
+
+struct mdio_platform_data {
+	unsigned long		bus_freq;
+};
+
+struct emac_platform_data {
+	char mac_addr[ETH_ALEN];
+	u32 ctrl_reg_offset;
+	u32 ctrl_mod_reg_offset;
+	u32 ctrl_ram_offset;
+	u32 hw_ram_addr;
+	u32 ctrl_ram_size;
+
+	/*
+	 * phy_id can be one of the following:
+	 *   - NULL		: use the first phy on the bus,
+	 *   - ""		: force to 100/full, no mdio control
+	 *   - "<bus>:<addr>"	: use the specified bus and phy
+	 */
+	const char *phy_id;
+
+	u8 rmii_en;
+	u8 version;
+	bool no_bd_ram;
+	void (*interrupt_enable) (void);
+	void (*interrupt_disable) (void);
+};
+
+enum {
+	EMAC_VERSION_1,	/* DM644x */
+	EMAC_VERSION_2,	/* DM646x */
+};
+
+void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context);
+#endif
diff --git a/include/linux/dca.h b/include/linux/dca.h
new file mode 100644
index 00000000..d27a7a05
--- /dev/null
+++ b/include/linux/dca.h
@@ -0,0 +1,81 @@
+/*
+ * Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called COPYING.
+ */
+#ifndef DCA_H
+#define DCA_H
+
+#include <linux/pci.h>
+
+/* DCA Provider API */
+
+/* DCA Notifier Interface */
+void dca_register_notify(struct notifier_block *nb);
+void dca_unregister_notify(struct notifier_block *nb);
+
+#define DCA_PROVIDER_ADD     0x0001
+#define DCA_PROVIDER_REMOVE  0x0002
+
+struct dca_provider {
+	struct list_head	node;
+	struct dca_ops		*ops;
+	struct device 		*cd;
+	int			 id;
+};
+
+struct dca_domain {
+	struct list_head	node;
+	struct list_head	dca_providers;
+	struct pci_bus		*pci_rc;
+};
+
+struct dca_ops {
+	int	(*add_requester)    (struct dca_provider *, struct device *);
+	int	(*remove_requester) (struct dca_provider *, struct device *);
+	u8	(*get_tag)	    (struct dca_provider *, struct device *,
+				     int cpu);
+	int	(*dev_managed)      (struct dca_provider *, struct device *);
+};
+
+struct dca_provider *alloc_dca_provider(struct dca_ops *ops, int priv_size);
+void free_dca_provider(struct dca_provider *dca);
+int register_dca_provider(struct dca_provider *dca, struct device *dev);
+void unregister_dca_provider(struct dca_provider *dca, struct device *dev);
+
+static inline void *dca_priv(struct dca_provider *dca)
+{
+	return (void *)dca + sizeof(struct dca_provider);
+}
+
+/* Requester API */
+#define DCA_GET_TAG_TWO_ARGS
+int dca_add_requester(struct device *dev);
+int dca_remove_requester(struct device *dev);
+u8 dca_get_tag(int cpu);
+u8 dca3_get_tag(struct device *dev, int cpu);
+
+/* internal stuff */
+int __init dca_sysfs_init(void);
+void __exit dca_sysfs_exit(void);
+int dca_sysfs_add_provider(struct dca_provider *dca, struct device *dev);
+void dca_sysfs_remove_provider(struct dca_provider *dca);
+int dca_sysfs_add_req(struct dca_provider *dca, struct device *dev, int slot);
+void dca_sysfs_remove_req(struct dca_provider *dca, int slot);
+
+#endif /* DCA_H */
diff --git a/include/linux/dcache.h b/include/linux/dcache.h
new file mode 100644
index 00000000..7e11f141
--- /dev/null
+++ b/include/linux/dcache.h
@@ -0,0 +1,403 @@
+#ifndef __LINUX_DCACHE_H
+#define __LINUX_DCACHE_H
+
+#include <linux/atomic.h>
+#include <linux/list.h>
+#include <linux/rculist.h>
+#include <linux/rculist_bl.h>
+#include <linux/spinlock.h>
+#include <linux/seqlock.h>
+#include <linux/cache.h>
+#include <linux/rcupdate.h>
+
+struct nameidata;
+struct path;
+struct vfsmount;
+
+/*
+ * linux/include/linux/dcache.h
+ *
+ * Dirent cache data structures
+ *
+ * (C) Copyright 1997 Thomas Schoebel-Theuer,
+ * with heavy changes by Linus Torvalds
+ */
+
+#define IS_ROOT(x) ((x) == (x)->d_parent)
+
+/*
+ * "quick string" -- eases parameter passing, but more importantly
+ * saves "metadata" about the string (ie length and the hash).
+ *
+ * hash comes first so it snuggles against d_parent in the
+ * dentry.
+ */
+struct qstr {
+	unsigned int hash;
+	unsigned int len;
+	const unsigned char *name;
+};
+
+struct dentry_stat_t {
+	int nr_dentry;
+	int nr_unused;
+	int age_limit;          /* age in seconds */
+	int want_pages;         /* pages requested by system */
+	int dummy[2];
+};
+extern struct dentry_stat_t dentry_stat;
+
+/* Name hashing routines. Initial hash value */
+/* Hash courtesy of the R5 hash in reiserfs modulo sign bits */
+#define init_name_hash()		0
+
+/* partial hash update function. Assume roughly 4 bits per character */
+static inline unsigned long
+partial_name_hash(unsigned long c, unsigned long prevhash)
+{
+	return (prevhash + (c << 4) + (c >> 4)) * 11;
+}
+
+/*
+ * Finally: cut down the number of bits to a int value (and try to avoid
+ * losing bits)
+ */
+static inline unsigned long end_name_hash(unsigned long hash)
+{
+	return (unsigned int) hash;
+}
+
+/* Compute the hash for a name string. */
+extern unsigned int full_name_hash(const unsigned char *, unsigned int);
+
+/*
+ * Try to keep struct dentry aligned on 64 byte cachelines (this will
+ * give reasonable cacheline footprint with larger lines without the
+ * large memory footprint increase).
+ */
+#ifdef CONFIG_64BIT
+# define DNAME_INLINE_LEN 32 /* 192 bytes */
+#else
+# ifdef CONFIG_SMP
+#  define DNAME_INLINE_LEN 36 /* 128 bytes */
+# else
+#  define DNAME_INLINE_LEN 40 /* 128 bytes */
+# endif
+#endif
+
+struct dentry {
+	/* RCU lookup touched fields */
+	unsigned int d_flags;		/* protected by d_lock */
+	seqcount_t d_seq;		/* per dentry seqlock */
+	struct hlist_bl_node d_hash;	/* lookup hash list */
+	struct dentry *d_parent;	/* parent directory */
+	struct qstr d_name;
+	struct inode *d_inode;		/* Where the name belongs to - NULL is
+					 * negative */
+	unsigned char d_iname[DNAME_INLINE_LEN];	/* small names */
+
+	/* Ref lookup also touches following */
+	unsigned int d_count;		/* protected by d_lock */
+	spinlock_t d_lock;		/* per dentry lock */
+	const struct dentry_operations *d_op;
+	struct super_block *d_sb;	/* The root of the dentry tree */
+	unsigned long d_time;		/* used by d_revalidate */
+	void *d_fsdata;			/* fs-specific data */
+
+	struct list_head d_lru;		/* LRU list */
+	/*
+	 * d_child and d_rcu can share memory
+	 */
+	union {
+		struct list_head d_child;	/* child of parent list */
+	 	struct rcu_head d_rcu;
+	} d_u;
+	struct list_head d_subdirs;	/* our children */
+	struct list_head d_alias;	/* inode alias list */
+};
+
+/*
+ * dentry->d_lock spinlock nesting subclasses:
+ *
+ * 0: normal
+ * 1: nested
+ */
+enum dentry_d_lock_class
+{
+	DENTRY_D_LOCK_NORMAL, /* implicitly used by plain spin_lock() APIs. */
+	DENTRY_D_LOCK_NESTED
+};
+
+struct dentry_operations {
+	int (*d_revalidate)(struct dentry *, struct nameidata *);
+	int (*d_hash)(const struct dentry *, const struct inode *,
+			struct qstr *);
+	int (*d_compare)(const struct dentry *, const struct inode *,
+			const struct dentry *, const struct inode *,
+			unsigned int, const char *, const struct qstr *);
+	int (*d_delete)(const struct dentry *);
+	void (*d_release)(struct dentry *);
+	void (*d_prune)(struct dentry *);
+	void (*d_iput)(struct dentry *, struct inode *);
+	char *(*d_dname)(struct dentry *, char *, int);
+	struct vfsmount *(*d_automount)(struct path *);
+	int (*d_manage)(struct dentry *, bool);
+} ____cacheline_aligned;
+
+/*
+ * Locking rules for dentry_operations callbacks are to be found in
+ * Documentation/filesystems/Locking. Keep it updated!
+ *
+ * FUrther descriptions are found in Documentation/filesystems/vfs.txt.
+ * Keep it updated too!
+ */
+
+/* d_flags entries */
+#define DCACHE_OP_HASH		0x0001
+#define DCACHE_OP_COMPARE	0x0002
+#define DCACHE_OP_REVALIDATE	0x0004
+#define DCACHE_OP_DELETE	0x0008
+#define DCACHE_OP_PRUNE         0x0010
+
+#define	DCACHE_DISCONNECTED	0x0020
+     /* This dentry is possibly not currently connected to the dcache tree, in
+      * which case its parent will either be itself, or will have this flag as
+      * well.  nfsd will not use a dentry with this bit set, but will first
+      * endeavour to clear the bit either by discovering that it is connected,
+      * or by performing lookup operations.   Any filesystem which supports
+      * nfsd_operations MUST have a lookup function which, if it finds a
+      * directory inode with a DCACHE_DISCONNECTED dentry, will d_move that
+      * dentry into place and return that dentry rather than the passed one,
+      * typically using d_splice_alias. */
+
+#define DCACHE_REFERENCED	0x0040  /* Recently used, don't discard. */
+#define DCACHE_RCUACCESS	0x0080	/* Entry has ever been RCU-visible */
+
+#define DCACHE_CANT_MOUNT	0x0100
+#define DCACHE_GENOCIDE		0x0200
+#define DCACHE_SHRINK_LIST	0x0400
+
+#define DCACHE_NFSFS_RENAMED	0x1000
+     /* this dentry has been "silly renamed" and has to be deleted on the last
+      * dput() */
+#define DCACHE_COOKIE		0x2000	/* For use by dcookie subsystem */
+#define DCACHE_FSNOTIFY_PARENT_WATCHED 0x4000
+     /* Parent inode is watched by some fsnotify listener */
+
+#define DCACHE_MOUNTED		0x10000	/* is a mountpoint */
+#define DCACHE_NEED_AUTOMOUNT	0x20000	/* handle automount on this dir */
+#define DCACHE_MANAGE_TRANSIT	0x40000	/* manage transit from this dirent */
+#define DCACHE_NEED_LOOKUP	0x80000 /* dentry requires i_op->lookup */
+#define DCACHE_MANAGED_DENTRY \
+	(DCACHE_MOUNTED|DCACHE_NEED_AUTOMOUNT|DCACHE_MANAGE_TRANSIT)
+
+extern seqlock_t rename_lock;
+
+static inline int dname_external(struct dentry *dentry)
+{
+	return dentry->d_name.name != dentry->d_iname;
+}
+
+/*
+ * These are the low-level FS interfaces to the dcache..
+ */
+extern void d_instantiate(struct dentry *, struct inode *);
+extern struct dentry * d_instantiate_unique(struct dentry *, struct inode *);
+extern struct dentry * d_materialise_unique(struct dentry *, struct inode *);
+extern void __d_drop(struct dentry *dentry);
+extern void d_drop(struct dentry *dentry);
+extern void d_delete(struct dentry *);
+extern void d_set_d_op(struct dentry *dentry, const struct dentry_operations *op);
+
+/* allocate/de-allocate */
+extern struct dentry * d_alloc(struct dentry *, const struct qstr *);
+extern struct dentry * d_alloc_pseudo(struct super_block *, const struct qstr *);
+extern struct dentry * d_splice_alias(struct inode *, struct dentry *);
+extern struct dentry * d_add_ci(struct dentry *, struct inode *, struct qstr *);
+extern struct dentry *d_find_any_alias(struct inode *inode);
+extern struct dentry * d_obtain_alias(struct inode *);
+extern void shrink_dcache_sb(struct super_block *);
+extern void shrink_dcache_parent(struct dentry *);
+extern void shrink_dcache_for_umount(struct super_block *);
+extern int d_invalidate(struct dentry *);
+
+/* only used at mount-time */
+extern struct dentry * d_make_root(struct inode *);
+
+/* <clickety>-<click> the ramfs-type tree */
+extern void d_genocide(struct dentry *);
+
+extern struct dentry *d_find_alias(struct inode *);
+extern void d_prune_aliases(struct inode *);
+
+/* test whether we have any submounts in a subdir tree */
+extern int have_submounts(struct dentry *);
+
+/*
+ * This adds the entry to the hash queues.
+ */
+extern void d_rehash(struct dentry *);
+
+/**
+ * d_add - add dentry to hash queues
+ * @entry: dentry to add
+ * @inode: The inode to attach to this dentry
+ *
+ * This adds the entry to the hash queues and initializes @inode.
+ * The entry was actually filled in earlier during d_alloc().
+ */
+ 
+static inline void d_add(struct dentry *entry, struct inode *inode)
+{
+	d_instantiate(entry, inode);
+	d_rehash(entry);
+}
+
+/**
+ * d_add_unique - add dentry to hash queues without aliasing
+ * @entry: dentry to add
+ * @inode: The inode to attach to this dentry
+ *
+ * This adds the entry to the hash queues and initializes @inode.
+ * The entry was actually filled in earlier during d_alloc().
+ */
+static inline struct dentry *d_add_unique(struct dentry *entry, struct inode *inode)
+{
+	struct dentry *res;
+
+	res = d_instantiate_unique(entry, inode);
+	d_rehash(res != NULL ? res : entry);
+	return res;
+}
+
+extern void dentry_update_name_case(struct dentry *, struct qstr *);
+
+/* used for rename() and baskets */
+extern void d_move(struct dentry *, struct dentry *);
+extern struct dentry *d_ancestor(struct dentry *, struct dentry *);
+
+/* appendix may either be NULL or be used for transname suffixes */
+extern struct dentry *d_lookup(struct dentry *, struct qstr *);
+extern struct dentry *d_hash_and_lookup(struct dentry *, struct qstr *);
+extern struct dentry *__d_lookup(struct dentry *, struct qstr *);
+extern struct dentry *__d_lookup_rcu(const struct dentry *parent,
+				const struct qstr *name,
+				unsigned *seq, struct inode **inode);
+
+/**
+ * __d_rcu_to_refcount - take a refcount on dentry if sequence check is ok
+ * @dentry: dentry to take a ref on
+ * @seq: seqcount to verify against
+ * Returns: 0 on failure, else 1.
+ *
+ * __d_rcu_to_refcount operates on a dentry,seq pair that was returned
+ * by __d_lookup_rcu, to get a reference on an rcu-walk dentry.
+ */
+static inline int __d_rcu_to_refcount(struct dentry *dentry, unsigned seq)
+{
+	int ret = 0;
+
+	assert_spin_locked(&dentry->d_lock);
+	if (!read_seqcount_retry(&dentry->d_seq, seq)) {
+		ret = 1;
+		dentry->d_count++;
+	}
+
+	return ret;
+}
+
+/* validate "insecure" dentry pointer */
+extern int d_validate(struct dentry *, struct dentry *);
+
+/*
+ * helper function for dentry_operations.d_dname() members
+ */
+extern char *dynamic_dname(struct dentry *, char *, int, const char *, ...);
+
+extern char *__d_path(const struct path *, const struct path *, char *, int);
+extern char *d_absolute_path(const struct path *, char *, int);
+extern char *d_path(const struct path *, char *, int);
+extern char *d_path_with_unreachable(const struct path *, char *, int);
+extern char *dentry_path_raw(struct dentry *, char *, int);
+extern char *dentry_path(struct dentry *, char *, int);
+
+/* Allocation counts.. */
+
+/**
+ *	dget, dget_dlock -	get a reference to a dentry
+ *	@dentry: dentry to get a reference to
+ *
+ *	Given a dentry or %NULL pointer increment the reference count
+ *	if appropriate and return the dentry. A dentry will not be 
+ *	destroyed when it has references.
+ */
+static inline struct dentry *dget_dlock(struct dentry *dentry)
+{
+	if (dentry)
+		dentry->d_count++;
+	return dentry;
+}
+
+static inline struct dentry *dget(struct dentry *dentry)
+{
+	if (dentry) {
+		spin_lock(&dentry->d_lock);
+		dget_dlock(dentry);
+		spin_unlock(&dentry->d_lock);
+	}
+	return dentry;
+}
+
+extern struct dentry *dget_parent(struct dentry *dentry);
+
+/**
+ *	d_unhashed -	is dentry hashed
+ *	@dentry: entry to check
+ *
+ *	Returns true if the dentry passed is not currently hashed.
+ */
+ 
+static inline int d_unhashed(struct dentry *dentry)
+{
+	return hlist_bl_unhashed(&dentry->d_hash);
+}
+
+static inline int d_unlinked(struct dentry *dentry)
+{
+	return d_unhashed(dentry) && !IS_ROOT(dentry);
+}
+
+static inline int cant_mount(struct dentry *dentry)
+{
+	return (dentry->d_flags & DCACHE_CANT_MOUNT);
+}
+
+static inline void dont_mount(struct dentry *dentry)
+{
+	spin_lock(&dentry->d_lock);
+	dentry->d_flags |= DCACHE_CANT_MOUNT;
+	spin_unlock(&dentry->d_lock);
+}
+
+extern void dput(struct dentry *);
+
+static inline bool d_managed(struct dentry *dentry)
+{
+	return dentry->d_flags & DCACHE_MANAGED_DENTRY;
+}
+
+static inline bool d_mountpoint(struct dentry *dentry)
+{
+	return dentry->d_flags & DCACHE_MOUNTED;
+}
+
+static inline bool d_need_lookup(struct dentry *dentry)
+{
+	return dentry->d_flags & DCACHE_NEED_LOOKUP;
+}
+
+extern void d_clear_need_lookup(struct dentry *dentry);
+
+extern int sysctl_vfs_cache_pressure;
+
+#endif	/* __LINUX_DCACHE_H */
diff --git a/include/linux/dcbnl.h b/include/linux/dcbnl.h
new file mode 100644
index 00000000..65a2562f
--- /dev/null
+++ b/include/linux/dcbnl.h
@@ -0,0 +1,672 @@
+/*
+ * Copyright (c) 2008-2011, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * Author: Lucy Liu <lucy.liu@intel.com>
+ */
+
+#ifndef __LINUX_DCBNL_H__
+#define __LINUX_DCBNL_H__
+
+#include <linux/types.h>
+
+/* IEEE 802.1Qaz std supported values */
+#define IEEE_8021QAZ_MAX_TCS	8
+
+#define IEEE_8021QAZ_TSA_STRICT		0
+#define IEEE_8021QAZ_TSA_CB_SHAPER	1
+#define IEEE_8021QAZ_TSA_ETS		2
+#define IEEE_8021QAZ_TSA_VENDOR		255
+
+/* This structure contains the IEEE 802.1Qaz ETS managed object
+ *
+ * @willing: willing bit in ETS configuration TLV
+ * @ets_cap: indicates supported capacity of ets feature
+ * @cbs: credit based shaper ets algorithm supported
+ * @tc_tx_bw: tc tx bandwidth indexed by traffic class
+ * @tc_rx_bw: tc rx bandwidth indexed by traffic class
+ * @tc_tsa: TSA Assignment table, indexed by traffic class
+ * @prio_tc: priority assignment table mapping 8021Qp to traffic class
+ * @tc_reco_bw: recommended tc bandwidth indexed by traffic class for TLV
+ * @tc_reco_tsa: recommended tc bandwidth indexed by traffic class for TLV
+ * @reco_prio_tc: recommended tc tx bandwidth indexed by traffic class for TLV
+ *
+ * Recommended values are used to set fields in the ETS recommendation TLV
+ * with hardware offloaded LLDP.
+ *
+ * ----
+ *  TSA Assignment 8 bit identifiers
+ *	0	strict priority
+ *	1	credit-based shaper
+ *	2	enhanced transmission selection
+ *	3-254	reserved
+ *	255	vendor specific
+ */
+struct ieee_ets {
+	__u8	willing;
+	__u8	ets_cap;
+	__u8	cbs;
+	__u8	tc_tx_bw[IEEE_8021QAZ_MAX_TCS];
+	__u8	tc_rx_bw[IEEE_8021QAZ_MAX_TCS];
+	__u8	tc_tsa[IEEE_8021QAZ_MAX_TCS];
+	__u8	prio_tc[IEEE_8021QAZ_MAX_TCS];
+	__u8	tc_reco_bw[IEEE_8021QAZ_MAX_TCS];
+	__u8	tc_reco_tsa[IEEE_8021QAZ_MAX_TCS];
+	__u8	reco_prio_tc[IEEE_8021QAZ_MAX_TCS];
+};
+
+/* This structure contains the IEEE 802.1Qaz PFC managed object
+ *
+ * @pfc_cap: Indicates the number of traffic classes on the local device
+ *	     that may simultaneously have PFC enabled.
+ * @pfc_en: bitmap indicating pfc enabled traffic classes
+ * @mbc: enable macsec bypass capability
+ * @delay: the allowance made for a round-trip propagation delay of the
+ *	   link in bits.
+ * @requests: count of the sent pfc frames
+ * @indications: count of the received pfc frames
+ */
+struct ieee_pfc {
+	__u8	pfc_cap;
+	__u8	pfc_en;
+	__u8	mbc;
+	__u16	delay;
+	__u64	requests[IEEE_8021QAZ_MAX_TCS];
+	__u64	indications[IEEE_8021QAZ_MAX_TCS];
+};
+
+/* CEE DCBX std supported values */
+#define CEE_DCBX_MAX_PGS	8
+#define CEE_DCBX_MAX_PRIO	8
+
+/**
+ * struct cee_pg - CEE Priority-Group managed object
+ *
+ * @willing: willing bit in the PG tlv
+ * @error: error bit in the PG tlv
+ * @pg_en: enable bit of the PG feature
+ * @tcs_supported: number of traffic classes supported
+ * @pg_bw: bandwidth percentage for each priority group
+ * @prio_pg: priority to PG mapping indexed by priority
+ */
+struct cee_pg {
+	__u8    willing;
+	__u8    error;
+	__u8    pg_en;
+	__u8    tcs_supported;
+	__u8    pg_bw[CEE_DCBX_MAX_PGS];
+	__u8    prio_pg[CEE_DCBX_MAX_PGS];
+};
+
+/**
+ * struct cee_pfc - CEE PFC managed object
+ *
+ * @willing: willing bit in the PFC tlv
+ * @error: error bit in the PFC tlv
+ * @pfc_en: bitmap indicating pfc enabled traffic classes
+ * @tcs_supported: number of traffic classes supported
+ */
+struct cee_pfc {
+	__u8    willing;
+	__u8    error;
+	__u8    pfc_en;
+	__u8    tcs_supported;
+};
+
+/* IEEE 802.1Qaz std supported values */
+#define IEEE_8021QAZ_APP_SEL_ETHERTYPE	1
+#define IEEE_8021QAZ_APP_SEL_STREAM	2
+#define IEEE_8021QAZ_APP_SEL_DGRAM	3
+#define IEEE_8021QAZ_APP_SEL_ANY	4
+
+/* This structure contains the IEEE 802.1Qaz APP managed object. This
+ * object is also used for the CEE std as well. There is no difference
+ * between the objects.
+ *
+ * @selector: protocol identifier type
+ * @protocol: protocol of type indicated
+ * @priority: 3-bit unsigned integer indicating priority
+ *
+ * ----
+ *  Selector field values
+ *	0	Reserved
+ *	1	Ethertype
+ *	2	Well known port number over TCP or SCTP
+ *	3	Well known port number over UDP or DCCP
+ *	4	Well known port number over TCP, SCTP, UDP, or DCCP
+ *	5-7	Reserved
+ */
+struct dcb_app {
+	__u8	selector;
+	__u8	priority;
+	__u16	protocol;
+};
+
+/**
+ * struct dcb_peer_app_info - APP feature information sent by the peer
+ *
+ * @willing: willing bit in the peer APP tlv
+ * @error: error bit in the peer APP tlv
+ *
+ * In addition to this information the full peer APP tlv also contains
+ * a table of 'app_count' APP objects defined above.
+ */
+struct dcb_peer_app_info {
+	__u8	willing;
+	__u8	error;
+};
+
+struct dcbmsg {
+	__u8               dcb_family;
+	__u8               cmd;
+	__u16              dcb_pad;
+};
+
+/**
+ * enum dcbnl_commands - supported DCB commands
+ *
+ * @DCB_CMD_UNDEFINED: unspecified command to catch errors
+ * @DCB_CMD_GSTATE: request the state of DCB in the device
+ * @DCB_CMD_SSTATE: set the state of DCB in the device
+ * @DCB_CMD_PGTX_GCFG: request the priority group configuration for Tx
+ * @DCB_CMD_PGTX_SCFG: set the priority group configuration for Tx
+ * @DCB_CMD_PGRX_GCFG: request the priority group configuration for Rx
+ * @DCB_CMD_PGRX_SCFG: set the priority group configuration for Rx
+ * @DCB_CMD_PFC_GCFG: request the priority flow control configuration
+ * @DCB_CMD_PFC_SCFG: set the priority flow control configuration
+ * @DCB_CMD_SET_ALL: apply all changes to the underlying device
+ * @DCB_CMD_GPERM_HWADDR: get the permanent MAC address of the underlying
+ *                        device.  Only useful when using bonding.
+ * @DCB_CMD_GCAP: request the DCB capabilities of the device
+ * @DCB_CMD_GNUMTCS: get the number of traffic classes currently supported
+ * @DCB_CMD_SNUMTCS: set the number of traffic classes
+ * @DCB_CMD_GBCN: set backward congestion notification configuration
+ * @DCB_CMD_SBCN: get backward congestion notification configration.
+ * @DCB_CMD_GAPP: get application protocol configuration
+ * @DCB_CMD_SAPP: set application protocol configuration
+ * @DCB_CMD_IEEE_SET: set IEEE 802.1Qaz configuration
+ * @DCB_CMD_IEEE_GET: get IEEE 802.1Qaz configuration
+ * @DCB_CMD_GDCBX: get DCBX engine configuration
+ * @DCB_CMD_SDCBX: set DCBX engine configuration
+ * @DCB_CMD_GFEATCFG: get DCBX features flags
+ * @DCB_CMD_SFEATCFG: set DCBX features negotiation flags
+ * @DCB_CMD_CEE_GET: get CEE aggregated configuration
+ * @DCB_CMD_IEEE_DEL: delete IEEE 802.1Qaz configuration
+ */
+enum dcbnl_commands {
+	DCB_CMD_UNDEFINED,
+
+	DCB_CMD_GSTATE,
+	DCB_CMD_SSTATE,
+
+	DCB_CMD_PGTX_GCFG,
+	DCB_CMD_PGTX_SCFG,
+	DCB_CMD_PGRX_GCFG,
+	DCB_CMD_PGRX_SCFG,
+
+	DCB_CMD_PFC_GCFG,
+	DCB_CMD_PFC_SCFG,
+
+	DCB_CMD_SET_ALL,
+
+	DCB_CMD_GPERM_HWADDR,
+
+	DCB_CMD_GCAP,
+
+	DCB_CMD_GNUMTCS,
+	DCB_CMD_SNUMTCS,
+
+	DCB_CMD_PFC_GSTATE,
+	DCB_CMD_PFC_SSTATE,
+
+	DCB_CMD_BCN_GCFG,
+	DCB_CMD_BCN_SCFG,
+
+	DCB_CMD_GAPP,
+	DCB_CMD_SAPP,
+
+	DCB_CMD_IEEE_SET,
+	DCB_CMD_IEEE_GET,
+
+	DCB_CMD_GDCBX,
+	DCB_CMD_SDCBX,
+
+	DCB_CMD_GFEATCFG,
+	DCB_CMD_SFEATCFG,
+
+	DCB_CMD_CEE_GET,
+	DCB_CMD_IEEE_DEL,
+
+	__DCB_CMD_ENUM_MAX,
+	DCB_CMD_MAX = __DCB_CMD_ENUM_MAX - 1,
+};
+
+/**
+ * enum dcbnl_attrs - DCB top-level netlink attributes
+ *
+ * @DCB_ATTR_UNDEFINED: unspecified attribute to catch errors
+ * @DCB_ATTR_IFNAME: interface name of the underlying device (NLA_STRING)
+ * @DCB_ATTR_STATE: enable state of DCB in the device (NLA_U8)
+ * @DCB_ATTR_PFC_STATE: enable state of PFC in the device (NLA_U8)
+ * @DCB_ATTR_PFC_CFG: priority flow control configuration (NLA_NESTED)
+ * @DCB_ATTR_NUM_TC: number of traffic classes supported in the device (NLA_U8)
+ * @DCB_ATTR_PG_CFG: priority group configuration (NLA_NESTED)
+ * @DCB_ATTR_SET_ALL: bool to commit changes to hardware or not (NLA_U8)
+ * @DCB_ATTR_PERM_HWADDR: MAC address of the physical device (NLA_NESTED)
+ * @DCB_ATTR_CAP: DCB capabilities of the device (NLA_NESTED)
+ * @DCB_ATTR_NUMTCS: number of traffic classes supported (NLA_NESTED)
+ * @DCB_ATTR_BCN: backward congestion notification configuration (NLA_NESTED)
+ * @DCB_ATTR_IEEE: IEEE 802.1Qaz supported attributes (NLA_NESTED)
+ * @DCB_ATTR_DCBX: DCBX engine configuration in the device (NLA_U8)
+ * @DCB_ATTR_FEATCFG: DCBX features flags (NLA_NESTED)
+ * @DCB_ATTR_CEE: CEE std supported attributes (NLA_NESTED)
+ */
+enum dcbnl_attrs {
+	DCB_ATTR_UNDEFINED,
+
+	DCB_ATTR_IFNAME,
+	DCB_ATTR_STATE,
+	DCB_ATTR_PFC_STATE,
+	DCB_ATTR_PFC_CFG,
+	DCB_ATTR_NUM_TC,
+	DCB_ATTR_PG_CFG,
+	DCB_ATTR_SET_ALL,
+	DCB_ATTR_PERM_HWADDR,
+	DCB_ATTR_CAP,
+	DCB_ATTR_NUMTCS,
+	DCB_ATTR_BCN,
+	DCB_ATTR_APP,
+
+	/* IEEE std attributes */
+	DCB_ATTR_IEEE,
+
+	DCB_ATTR_DCBX,
+	DCB_ATTR_FEATCFG,
+
+	/* CEE nested attributes */
+	DCB_ATTR_CEE,
+
+	__DCB_ATTR_ENUM_MAX,
+	DCB_ATTR_MAX = __DCB_ATTR_ENUM_MAX - 1,
+};
+
+/**
+ * enum ieee_attrs - IEEE 802.1Qaz get/set attributes
+ *
+ * @DCB_ATTR_IEEE_UNSPEC: unspecified
+ * @DCB_ATTR_IEEE_ETS: negotiated ETS configuration
+ * @DCB_ATTR_IEEE_PFC: negotiated PFC configuration
+ * @DCB_ATTR_IEEE_APP_TABLE: negotiated APP configuration
+ * @DCB_ATTR_IEEE_PEER_ETS: peer ETS configuration - get only
+ * @DCB_ATTR_IEEE_PEER_PFC: peer PFC configuration - get only
+ * @DCB_ATTR_IEEE_PEER_APP: peer APP tlv - get only
+ */
+enum ieee_attrs {
+	DCB_ATTR_IEEE_UNSPEC,
+	DCB_ATTR_IEEE_ETS,
+	DCB_ATTR_IEEE_PFC,
+	DCB_ATTR_IEEE_APP_TABLE,
+	DCB_ATTR_IEEE_PEER_ETS,
+	DCB_ATTR_IEEE_PEER_PFC,
+	DCB_ATTR_IEEE_PEER_APP,
+	__DCB_ATTR_IEEE_MAX
+};
+#define DCB_ATTR_IEEE_MAX (__DCB_ATTR_IEEE_MAX - 1)
+
+enum ieee_attrs_app {
+	DCB_ATTR_IEEE_APP_UNSPEC,
+	DCB_ATTR_IEEE_APP,
+	__DCB_ATTR_IEEE_APP_MAX
+};
+#define DCB_ATTR_IEEE_APP_MAX (__DCB_ATTR_IEEE_APP_MAX - 1)
+
+/**
+ * enum cee_attrs - CEE DCBX get attributes.
+ *
+ * @DCB_ATTR_CEE_UNSPEC: unspecified
+ * @DCB_ATTR_CEE_PEER_PG: peer PG configuration - get only
+ * @DCB_ATTR_CEE_PEER_PFC: peer PFC configuration - get only
+ * @DCB_ATTR_CEE_PEER_APP_TABLE: peer APP tlv - get only
+ * @DCB_ATTR_CEE_TX_PG: TX PG configuration (DCB_CMD_PGTX_GCFG)
+ * @DCB_ATTR_CEE_RX_PG: RX PG configuration (DCB_CMD_PGRX_GCFG)
+ * @DCB_ATTR_CEE_PFC: PFC configuration (DCB_CMD_PFC_GCFG)
+ * @DCB_ATTR_CEE_APP_TABLE: APP configuration (multi DCB_CMD_GAPP)
+ * @DCB_ATTR_CEE_FEAT: DCBX features flags (DCB_CMD_GFEATCFG)
+ *
+ * An aggregated collection of the cee std negotiated parameters.
+ */
+enum cee_attrs {
+	DCB_ATTR_CEE_UNSPEC,
+	DCB_ATTR_CEE_PEER_PG,
+	DCB_ATTR_CEE_PEER_PFC,
+	DCB_ATTR_CEE_PEER_APP_TABLE,
+	DCB_ATTR_CEE_TX_PG,
+	DCB_ATTR_CEE_RX_PG,
+	DCB_ATTR_CEE_PFC,
+	DCB_ATTR_CEE_APP_TABLE,
+	DCB_ATTR_CEE_FEAT,
+	__DCB_ATTR_CEE_MAX
+};
+#define DCB_ATTR_CEE_MAX (__DCB_ATTR_CEE_MAX - 1)
+
+enum peer_app_attr {
+	DCB_ATTR_CEE_PEER_APP_UNSPEC,
+	DCB_ATTR_CEE_PEER_APP_INFO,
+	DCB_ATTR_CEE_PEER_APP,
+	__DCB_ATTR_CEE_PEER_APP_MAX
+};
+#define DCB_ATTR_CEE_PEER_APP_MAX (__DCB_ATTR_CEE_PEER_APP_MAX - 1)
+
+enum cee_attrs_app {
+	DCB_ATTR_CEE_APP_UNSPEC,
+	DCB_ATTR_CEE_APP,
+	__DCB_ATTR_CEE_APP_MAX
+};
+#define DCB_ATTR_CEE_APP_MAX (__DCB_ATTR_CEE_APP_MAX - 1)
+
+/**
+ * enum dcbnl_pfc_attrs - DCB Priority Flow Control user priority nested attrs
+ *
+ * @DCB_PFC_UP_ATTR_UNDEFINED: unspecified attribute to catch errors
+ * @DCB_PFC_UP_ATTR_0: Priority Flow Control value for User Priority 0 (NLA_U8)
+ * @DCB_PFC_UP_ATTR_1: Priority Flow Control value for User Priority 1 (NLA_U8)
+ * @DCB_PFC_UP_ATTR_2: Priority Flow Control value for User Priority 2 (NLA_U8)
+ * @DCB_PFC_UP_ATTR_3: Priority Flow Control value for User Priority 3 (NLA_U8)
+ * @DCB_PFC_UP_ATTR_4: Priority Flow Control value for User Priority 4 (NLA_U8)
+ * @DCB_PFC_UP_ATTR_5: Priority Flow Control value for User Priority 5 (NLA_U8)
+ * @DCB_PFC_UP_ATTR_6: Priority Flow Control value for User Priority 6 (NLA_U8)
+ * @DCB_PFC_UP_ATTR_7: Priority Flow Control value for User Priority 7 (NLA_U8)
+ * @DCB_PFC_UP_ATTR_MAX: highest attribute number currently defined
+ * @DCB_PFC_UP_ATTR_ALL: apply to all priority flow control attrs (NLA_FLAG)
+ *
+ */
+enum dcbnl_pfc_up_attrs {
+	DCB_PFC_UP_ATTR_UNDEFINED,
+
+	DCB_PFC_UP_ATTR_0,
+	DCB_PFC_UP_ATTR_1,
+	DCB_PFC_UP_ATTR_2,
+	DCB_PFC_UP_ATTR_3,
+	DCB_PFC_UP_ATTR_4,
+	DCB_PFC_UP_ATTR_5,
+	DCB_PFC_UP_ATTR_6,
+	DCB_PFC_UP_ATTR_7,
+	DCB_PFC_UP_ATTR_ALL,
+
+	__DCB_PFC_UP_ATTR_ENUM_MAX,
+	DCB_PFC_UP_ATTR_MAX = __DCB_PFC_UP_ATTR_ENUM_MAX - 1,
+};
+
+/**
+ * enum dcbnl_pg_attrs - DCB Priority Group attributes
+ *
+ * @DCB_PG_ATTR_UNDEFINED: unspecified attribute to catch errors
+ * @DCB_PG_ATTR_TC_0: Priority Group Traffic Class 0 configuration (NLA_NESTED)
+ * @DCB_PG_ATTR_TC_1: Priority Group Traffic Class 1 configuration (NLA_NESTED)
+ * @DCB_PG_ATTR_TC_2: Priority Group Traffic Class 2 configuration (NLA_NESTED)
+ * @DCB_PG_ATTR_TC_3: Priority Group Traffic Class 3 configuration (NLA_NESTED)
+ * @DCB_PG_ATTR_TC_4: Priority Group Traffic Class 4 configuration (NLA_NESTED)
+ * @DCB_PG_ATTR_TC_5: Priority Group Traffic Class 5 configuration (NLA_NESTED)
+ * @DCB_PG_ATTR_TC_6: Priority Group Traffic Class 6 configuration (NLA_NESTED)
+ * @DCB_PG_ATTR_TC_7: Priority Group Traffic Class 7 configuration (NLA_NESTED)
+ * @DCB_PG_ATTR_TC_MAX: highest attribute number currently defined
+ * @DCB_PG_ATTR_TC_ALL: apply to all traffic classes (NLA_NESTED)
+ * @DCB_PG_ATTR_BW_ID_0: Percent of link bandwidth for Priority Group 0 (NLA_U8)
+ * @DCB_PG_ATTR_BW_ID_1: Percent of link bandwidth for Priority Group 1 (NLA_U8)
+ * @DCB_PG_ATTR_BW_ID_2: Percent of link bandwidth for Priority Group 2 (NLA_U8)
+ * @DCB_PG_ATTR_BW_ID_3: Percent of link bandwidth for Priority Group 3 (NLA_U8)
+ * @DCB_PG_ATTR_BW_ID_4: Percent of link bandwidth for Priority Group 4 (NLA_U8)
+ * @DCB_PG_ATTR_BW_ID_5: Percent of link bandwidth for Priority Group 5 (NLA_U8)
+ * @DCB_PG_ATTR_BW_ID_6: Percent of link bandwidth for Priority Group 6 (NLA_U8)
+ * @DCB_PG_ATTR_BW_ID_7: Percent of link bandwidth for Priority Group 7 (NLA_U8)
+ * @DCB_PG_ATTR_BW_ID_MAX: highest attribute number currently defined
+ * @DCB_PG_ATTR_BW_ID_ALL: apply to all priority groups (NLA_FLAG)
+ *
+ */
+enum dcbnl_pg_attrs {
+	DCB_PG_ATTR_UNDEFINED,
+
+	DCB_PG_ATTR_TC_0,
+	DCB_PG_ATTR_TC_1,
+	DCB_PG_ATTR_TC_2,
+	DCB_PG_ATTR_TC_3,
+	DCB_PG_ATTR_TC_4,
+	DCB_PG_ATTR_TC_5,
+	DCB_PG_ATTR_TC_6,
+	DCB_PG_ATTR_TC_7,
+	DCB_PG_ATTR_TC_MAX,
+	DCB_PG_ATTR_TC_ALL,
+
+	DCB_PG_ATTR_BW_ID_0,
+	DCB_PG_ATTR_BW_ID_1,
+	DCB_PG_ATTR_BW_ID_2,
+	DCB_PG_ATTR_BW_ID_3,
+	DCB_PG_ATTR_BW_ID_4,
+	DCB_PG_ATTR_BW_ID_5,
+	DCB_PG_ATTR_BW_ID_6,
+	DCB_PG_ATTR_BW_ID_7,
+	DCB_PG_ATTR_BW_ID_MAX,
+	DCB_PG_ATTR_BW_ID_ALL,
+
+	__DCB_PG_ATTR_ENUM_MAX,
+	DCB_PG_ATTR_MAX = __DCB_PG_ATTR_ENUM_MAX - 1,
+};
+
+/**
+ * enum dcbnl_tc_attrs - DCB Traffic Class attributes
+ *
+ * @DCB_TC_ATTR_PARAM_UNDEFINED: unspecified attribute to catch errors
+ * @DCB_TC_ATTR_PARAM_PGID: (NLA_U8) Priority group the traffic class belongs to
+ *                          Valid values are:  0-7
+ * @DCB_TC_ATTR_PARAM_UP_MAPPING: (NLA_U8) Traffic class to user priority map
+ *                                Some devices may not support changing the
+ *                                user priority map of a TC.
+ * @DCB_TC_ATTR_PARAM_STRICT_PRIO: (NLA_U8) Strict priority setting
+ *                                 0 - none
+ *                                 1 - group strict
+ *                                 2 - link strict
+ * @DCB_TC_ATTR_PARAM_BW_PCT: optional - (NLA_U8) If supported by the device and
+ *                            not configured to use link strict priority,
+ *                            this is the percentage of bandwidth of the
+ *                            priority group this traffic class belongs to
+ * @DCB_TC_ATTR_PARAM_ALL: (NLA_FLAG) all traffic class parameters
+ *
+ */
+enum dcbnl_tc_attrs {
+	DCB_TC_ATTR_PARAM_UNDEFINED,
+
+	DCB_TC_ATTR_PARAM_PGID,
+	DCB_TC_ATTR_PARAM_UP_MAPPING,
+	DCB_TC_ATTR_PARAM_STRICT_PRIO,
+	DCB_TC_ATTR_PARAM_BW_PCT,
+	DCB_TC_ATTR_PARAM_ALL,
+
+	__DCB_TC_ATTR_PARAM_ENUM_MAX,
+	DCB_TC_ATTR_PARAM_MAX = __DCB_TC_ATTR_PARAM_ENUM_MAX - 1,
+};
+
+/**
+ * enum dcbnl_cap_attrs - DCB Capability attributes
+ *
+ * @DCB_CAP_ATTR_UNDEFINED: unspecified attribute to catch errors
+ * @DCB_CAP_ATTR_ALL: (NLA_FLAG) all capability parameters
+ * @DCB_CAP_ATTR_PG: (NLA_U8) device supports Priority Groups
+ * @DCB_CAP_ATTR_PFC: (NLA_U8) device supports Priority Flow Control
+ * @DCB_CAP_ATTR_UP2TC: (NLA_U8) device supports user priority to
+ *                               traffic class mapping
+ * @DCB_CAP_ATTR_PG_TCS: (NLA_U8) bitmap where each bit represents a
+ *                                number of traffic classes the device
+ *                                can be configured to use for Priority Groups
+ * @DCB_CAP_ATTR_PFC_TCS: (NLA_U8) bitmap where each bit represents a
+ *                                 number of traffic classes the device can be
+ *                                 configured to use for Priority Flow Control
+ * @DCB_CAP_ATTR_GSP: (NLA_U8) device supports group strict priority
+ * @DCB_CAP_ATTR_BCN: (NLA_U8) device supports Backwards Congestion
+ *                             Notification
+ * @DCB_CAP_ATTR_DCBX: (NLA_U8) device supports DCBX engine
+ *
+ */
+enum dcbnl_cap_attrs {
+	DCB_CAP_ATTR_UNDEFINED,
+	DCB_CAP_ATTR_ALL,
+	DCB_CAP_ATTR_PG,
+	DCB_CAP_ATTR_PFC,
+	DCB_CAP_ATTR_UP2TC,
+	DCB_CAP_ATTR_PG_TCS,
+	DCB_CAP_ATTR_PFC_TCS,
+	DCB_CAP_ATTR_GSP,
+	DCB_CAP_ATTR_BCN,
+	DCB_CAP_ATTR_DCBX,
+
+	__DCB_CAP_ATTR_ENUM_MAX,
+	DCB_CAP_ATTR_MAX = __DCB_CAP_ATTR_ENUM_MAX - 1,
+};
+
+/**
+ * DCBX capability flags
+ *
+ * @DCB_CAP_DCBX_HOST: DCBX negotiation is performed by the host LLDP agent.
+ *                     'set' routines are used to configure the device with
+ *                     the negotiated parameters
+ *
+ * @DCB_CAP_DCBX_LLD_MANAGED: DCBX negotiation is not performed in the host but
+ *                            by another entity
+ *                            'get' routines are used to retrieve the
+ *                            negotiated parameters
+ *                            'set' routines can be used to set the initial
+ *                            negotiation configuration
+ *
+ * @DCB_CAP_DCBX_VER_CEE: for a non-host DCBX engine, indicates the engine
+ *                        supports the CEE protocol flavor
+ *
+ * @DCB_CAP_DCBX_VER_IEEE: for a non-host DCBX engine, indicates the engine
+ *                         supports the IEEE protocol flavor
+ *
+ * @DCB_CAP_DCBX_STATIC: for a non-host DCBX engine, indicates the engine
+ *                       supports static configuration (i.e no actual
+ *                       negotiation is performed negotiated parameters equal
+ *                       the initial configuration)
+ *
+ */
+#define DCB_CAP_DCBX_HOST		0x01
+#define DCB_CAP_DCBX_LLD_MANAGED	0x02
+#define DCB_CAP_DCBX_VER_CEE		0x04
+#define DCB_CAP_DCBX_VER_IEEE		0x08
+#define DCB_CAP_DCBX_STATIC		0x10
+
+/**
+ * enum dcbnl_numtcs_attrs - number of traffic classes
+ *
+ * @DCB_NUMTCS_ATTR_UNDEFINED: unspecified attribute to catch errors
+ * @DCB_NUMTCS_ATTR_ALL: (NLA_FLAG) all traffic class attributes
+ * @DCB_NUMTCS_ATTR_PG: (NLA_U8) number of traffic classes used for
+ *                               priority groups
+ * @DCB_NUMTCS_ATTR_PFC: (NLA_U8) number of traffic classes which can
+ *                                support priority flow control
+ */
+enum dcbnl_numtcs_attrs {
+	DCB_NUMTCS_ATTR_UNDEFINED,
+	DCB_NUMTCS_ATTR_ALL,
+	DCB_NUMTCS_ATTR_PG,
+	DCB_NUMTCS_ATTR_PFC,
+
+	__DCB_NUMTCS_ATTR_ENUM_MAX,
+	DCB_NUMTCS_ATTR_MAX = __DCB_NUMTCS_ATTR_ENUM_MAX - 1,
+};
+
+enum dcbnl_bcn_attrs{
+	DCB_BCN_ATTR_UNDEFINED = 0,
+
+	DCB_BCN_ATTR_RP_0,
+	DCB_BCN_ATTR_RP_1,
+	DCB_BCN_ATTR_RP_2,
+	DCB_BCN_ATTR_RP_3,
+	DCB_BCN_ATTR_RP_4,
+	DCB_BCN_ATTR_RP_5,
+	DCB_BCN_ATTR_RP_6,
+	DCB_BCN_ATTR_RP_7,
+	DCB_BCN_ATTR_RP_ALL,
+
+	DCB_BCN_ATTR_BCNA_0,
+	DCB_BCN_ATTR_BCNA_1,
+	DCB_BCN_ATTR_ALPHA,
+	DCB_BCN_ATTR_BETA,
+	DCB_BCN_ATTR_GD,
+	DCB_BCN_ATTR_GI,
+	DCB_BCN_ATTR_TMAX,
+	DCB_BCN_ATTR_TD,
+	DCB_BCN_ATTR_RMIN,
+	DCB_BCN_ATTR_W,
+	DCB_BCN_ATTR_RD,
+	DCB_BCN_ATTR_RU,
+	DCB_BCN_ATTR_WRTT,
+	DCB_BCN_ATTR_RI,
+	DCB_BCN_ATTR_C,
+	DCB_BCN_ATTR_ALL,
+
+	__DCB_BCN_ATTR_ENUM_MAX,
+	DCB_BCN_ATTR_MAX = __DCB_BCN_ATTR_ENUM_MAX - 1,
+};
+
+/**
+ * enum dcb_general_attr_values - general DCB attribute values
+ *
+ * @DCB_ATTR_UNDEFINED: value used to indicate an attribute is not supported
+ *
+ */
+enum dcb_general_attr_values {
+	DCB_ATTR_VALUE_UNDEFINED = 0xff
+};
+
+#define DCB_APP_IDTYPE_ETHTYPE	0x00
+#define DCB_APP_IDTYPE_PORTNUM	0x01
+enum dcbnl_app_attrs {
+	DCB_APP_ATTR_UNDEFINED,
+
+	DCB_APP_ATTR_IDTYPE,
+	DCB_APP_ATTR_ID,
+	DCB_APP_ATTR_PRIORITY,
+
+	__DCB_APP_ATTR_ENUM_MAX,
+	DCB_APP_ATTR_MAX = __DCB_APP_ATTR_ENUM_MAX - 1,
+};
+
+/**
+ * enum dcbnl_featcfg_attrs - features conifiguration flags
+ *
+ * @DCB_FEATCFG_ATTR_UNDEFINED: unspecified attribute to catch errors
+ * @DCB_FEATCFG_ATTR_ALL: (NLA_FLAG) all features configuration attributes
+ * @DCB_FEATCFG_ATTR_PG: (NLA_U8) configuration flags for priority groups
+ * @DCB_FEATCFG_ATTR_PFC: (NLA_U8) configuration flags for priority
+ *                                 flow control
+ * @DCB_FEATCFG_ATTR_APP: (NLA_U8) configuration flags for application TLV
+ *
+ */
+#define DCB_FEATCFG_ERROR	0x01	/* error in feature resolution */
+#define DCB_FEATCFG_ENABLE	0x02	/* enable feature */
+#define DCB_FEATCFG_WILLING	0x04	/* feature is willing */
+#define DCB_FEATCFG_ADVERTISE	0x08	/* advertise feature */
+enum dcbnl_featcfg_attrs {
+	DCB_FEATCFG_ATTR_UNDEFINED,
+	DCB_FEATCFG_ATTR_ALL,
+	DCB_FEATCFG_ATTR_PG,
+	DCB_FEATCFG_ATTR_PFC,
+	DCB_FEATCFG_ATTR_APP,
+
+	__DCB_FEATCFG_ATTR_ENUM_MAX,
+	DCB_FEATCFG_ATTR_MAX = __DCB_FEATCFG_ATTR_ENUM_MAX - 1,
+};
+
+#endif /* __LINUX_DCBNL_H__ */
diff --git a/include/linux/dccp.h b/include/linux/dccp.h
new file mode 100644
index 00000000..eaf95a02
--- /dev/null
+++ b/include/linux/dccp.h
@@ -0,0 +1,554 @@
+#ifndef _LINUX_DCCP_H
+#define _LINUX_DCCP_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/**
+ * struct dccp_hdr - generic part of DCCP packet header
+ *
+ * @dccph_sport - Relevant port on the endpoint that sent this packet
+ * @dccph_dport - Relevant port on the other endpoint
+ * @dccph_doff - Data Offset from the start of the DCCP header, in 32-bit words
+ * @dccph_ccval - Used by the HC-Sender CCID
+ * @dccph_cscov - Parts of the packet that are covered by the Checksum field
+ * @dccph_checksum - Internet checksum, depends on dccph_cscov
+ * @dccph_x - 0 = 24 bit sequence number, 1 = 48
+ * @dccph_type - packet type, see DCCP_PKT_ prefixed macros
+ * @dccph_seq - sequence number high or low order 24 bits, depends on dccph_x
+ */
+struct dccp_hdr {
+	__be16	dccph_sport,
+		dccph_dport;
+	__u8	dccph_doff;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8	dccph_cscov:4,
+		dccph_ccval:4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u8	dccph_ccval:4,
+		dccph_cscov:4;
+#else
+#error  "Adjust your <asm/byteorder.h> defines"
+#endif
+	__sum16	dccph_checksum;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8	dccph_x:1,
+		dccph_type:4,
+		dccph_reserved:3;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u8	dccph_reserved:3,
+		dccph_type:4,
+		dccph_x:1;
+#else
+#error  "Adjust your <asm/byteorder.h> defines"
+#endif
+	__u8	dccph_seq2;
+	__be16	dccph_seq;
+};
+
+/**
+ * struct dccp_hdr_ext - the low bits of a 48 bit seq packet
+ *
+ * @dccph_seq_low - low 24 bits of a 48 bit seq packet
+ */
+struct dccp_hdr_ext {
+	__be32	dccph_seq_low;
+};
+
+/**
+ * struct dccp_hdr_request - Connection initiation request header
+ *
+ * @dccph_req_service - Service to which the client app wants to connect
+ */
+struct dccp_hdr_request {
+	__be32	dccph_req_service;
+};
+/**
+ * struct dccp_hdr_ack_bits - acknowledgment bits common to most packets
+ *
+ * @dccph_resp_ack_nr_high - 48 bit ack number high order bits, contains GSR
+ * @dccph_resp_ack_nr_low - 48 bit ack number low order bits, contains GSR
+ */
+struct dccp_hdr_ack_bits {
+	__be16	dccph_reserved1;
+	__be16	dccph_ack_nr_high;
+	__be32	dccph_ack_nr_low;
+};
+/**
+ * struct dccp_hdr_response - Connection initiation response header
+ *
+ * @dccph_resp_ack - 48 bit Acknowledgment Number Subheader (5.3)
+ * @dccph_resp_service - Echoes the Service Code on a received DCCP-Request
+ */
+struct dccp_hdr_response {
+	struct dccp_hdr_ack_bits	dccph_resp_ack;
+	__be32				dccph_resp_service;
+};
+
+/**
+ * struct dccp_hdr_reset - Unconditionally shut down a connection
+ *
+ * @dccph_reset_ack - 48 bit Acknowledgment Number Subheader (5.6)
+ * @dccph_reset_code - one of %dccp_reset_codes
+ * @dccph_reset_data - the Data 1 ... Data 3 fields from 5.6
+ */
+struct dccp_hdr_reset {
+	struct dccp_hdr_ack_bits	dccph_reset_ack;
+	__u8				dccph_reset_code,
+					dccph_reset_data[3];
+};
+
+enum dccp_pkt_type {
+	DCCP_PKT_REQUEST = 0,
+	DCCP_PKT_RESPONSE,
+	DCCP_PKT_DATA,
+	DCCP_PKT_ACK,
+	DCCP_PKT_DATAACK,
+	DCCP_PKT_CLOSEREQ,
+	DCCP_PKT_CLOSE,
+	DCCP_PKT_RESET,
+	DCCP_PKT_SYNC,
+	DCCP_PKT_SYNCACK,
+	DCCP_PKT_INVALID,
+};
+
+#define DCCP_NR_PKT_TYPES DCCP_PKT_INVALID
+
+static inline unsigned int dccp_packet_hdr_len(const __u8 type)
+{
+	if (type == DCCP_PKT_DATA)
+		return 0;
+	if (type == DCCP_PKT_DATAACK	||
+	    type == DCCP_PKT_ACK	||
+	    type == DCCP_PKT_SYNC	||
+	    type == DCCP_PKT_SYNCACK	||
+	    type == DCCP_PKT_CLOSE	||
+	    type == DCCP_PKT_CLOSEREQ)
+		return sizeof(struct dccp_hdr_ack_bits);
+	if (type == DCCP_PKT_REQUEST)
+		return sizeof(struct dccp_hdr_request);
+	if (type == DCCP_PKT_RESPONSE)
+		return sizeof(struct dccp_hdr_response);
+	return sizeof(struct dccp_hdr_reset);
+}
+enum dccp_reset_codes {
+	DCCP_RESET_CODE_UNSPECIFIED = 0,
+	DCCP_RESET_CODE_CLOSED,
+	DCCP_RESET_CODE_ABORTED,
+	DCCP_RESET_CODE_NO_CONNECTION,
+	DCCP_RESET_CODE_PACKET_ERROR,
+	DCCP_RESET_CODE_OPTION_ERROR,
+	DCCP_RESET_CODE_MANDATORY_ERROR,
+	DCCP_RESET_CODE_CONNECTION_REFUSED,
+	DCCP_RESET_CODE_BAD_SERVICE_CODE,
+	DCCP_RESET_CODE_TOO_BUSY,
+	DCCP_RESET_CODE_BAD_INIT_COOKIE,
+	DCCP_RESET_CODE_AGGRESSION_PENALTY,
+
+	DCCP_MAX_RESET_CODES		/* Leave at the end!  */
+};
+
+/* DCCP options */
+enum {
+	DCCPO_PADDING = 0,
+	DCCPO_MANDATORY = 1,
+	DCCPO_MIN_RESERVED = 3,
+	DCCPO_MAX_RESERVED = 31,
+	DCCPO_CHANGE_L = 32,
+	DCCPO_CONFIRM_L = 33,
+	DCCPO_CHANGE_R = 34,
+	DCCPO_CONFIRM_R = 35,
+	DCCPO_NDP_COUNT = 37,
+	DCCPO_ACK_VECTOR_0 = 38,
+	DCCPO_ACK_VECTOR_1 = 39,
+	DCCPO_TIMESTAMP = 41,
+	DCCPO_TIMESTAMP_ECHO = 42,
+	DCCPO_ELAPSED_TIME = 43,
+	DCCPO_MAX = 45,
+	DCCPO_MIN_RX_CCID_SPECIFIC = 128,	/* from sender to receiver */
+	DCCPO_MAX_RX_CCID_SPECIFIC = 191,
+	DCCPO_MIN_TX_CCID_SPECIFIC = 192,	/* from receiver to sender */
+	DCCPO_MAX_TX_CCID_SPECIFIC = 255,
+};
+/* maximum size of a single TLV-encoded DCCP option (sans type/len bytes) */
+#define DCCP_SINGLE_OPT_MAXLEN	253
+
+/* DCCP CCIDS */
+enum {
+	DCCPC_CCID2 = 2,
+	DCCPC_CCID3 = 3,
+};
+
+/* DCCP features (RFC 4340 section 6.4) */
+enum dccp_feature_numbers {
+	DCCPF_RESERVED = 0,
+	DCCPF_CCID = 1,
+	DCCPF_SHORT_SEQNOS = 2,
+	DCCPF_SEQUENCE_WINDOW = 3,
+	DCCPF_ECN_INCAPABLE = 4,
+	DCCPF_ACK_RATIO = 5,
+	DCCPF_SEND_ACK_VECTOR = 6,
+	DCCPF_SEND_NDP_COUNT = 7,
+	DCCPF_MIN_CSUM_COVER = 8,
+	DCCPF_DATA_CHECKSUM = 9,
+	/* 10-127 reserved */
+	DCCPF_MIN_CCID_SPECIFIC = 128,
+	DCCPF_SEND_LEV_RATE = 192,	/* RFC 4342, sec. 8.4 */
+	DCCPF_MAX_CCID_SPECIFIC = 255,
+};
+
+/* DCCP socket control message types for cmsg */
+enum dccp_cmsg_type {
+	DCCP_SCM_PRIORITY = 1,
+	DCCP_SCM_QPOLICY_MAX = 0xFFFF,
+	/* ^-- Up to here reserved exclusively for qpolicy parameters */
+	DCCP_SCM_MAX
+};
+
+/* DCCP priorities for outgoing/queued packets */
+enum dccp_packet_dequeueing_policy {
+	DCCPQ_POLICY_SIMPLE,
+	DCCPQ_POLICY_PRIO,
+	DCCPQ_POLICY_MAX
+};
+
+/* DCCP socket options */
+#define DCCP_SOCKOPT_PACKET_SIZE	1 /* XXX deprecated, without effect */
+#define DCCP_SOCKOPT_SERVICE		2
+#define DCCP_SOCKOPT_CHANGE_L		3
+#define DCCP_SOCKOPT_CHANGE_R		4
+#define DCCP_SOCKOPT_GET_CUR_MPS	5
+#define DCCP_SOCKOPT_SERVER_TIMEWAIT	6
+#define DCCP_SOCKOPT_SEND_CSCOV		10
+#define DCCP_SOCKOPT_RECV_CSCOV		11
+#define DCCP_SOCKOPT_AVAILABLE_CCIDS	12
+#define DCCP_SOCKOPT_CCID		13
+#define DCCP_SOCKOPT_TX_CCID		14
+#define DCCP_SOCKOPT_RX_CCID		15
+#define DCCP_SOCKOPT_QPOLICY_ID		16
+#define DCCP_SOCKOPT_QPOLICY_TXQLEN	17
+#define DCCP_SOCKOPT_CCID_RX_INFO	128
+#define DCCP_SOCKOPT_CCID_TX_INFO	192
+
+/* maximum number of services provided on the same listening port */
+#define DCCP_SERVICE_LIST_MAX_LEN      32
+
+#ifdef __KERNEL__
+
+#include <linux/in.h>
+#include <linux/interrupt.h>
+#include <linux/ktime.h>
+#include <linux/list.h>
+#include <linux/uio.h>
+#include <linux/workqueue.h>
+
+#include <net/inet_connection_sock.h>
+#include <net/inet_sock.h>
+#include <net/inet_timewait_sock.h>
+#include <net/tcp_states.h>
+
+enum dccp_state {
+	DCCP_OPEN	     = TCP_ESTABLISHED,
+	DCCP_REQUESTING	     = TCP_SYN_SENT,
+	DCCP_LISTEN	     = TCP_LISTEN,
+	DCCP_RESPOND	     = TCP_SYN_RECV,
+	/*
+	 * States involved in closing a DCCP connection:
+	 * 1) ACTIVE_CLOSEREQ is entered by a server sending a CloseReq.
+	 *
+	 * 2) CLOSING can have three different meanings (RFC 4340, 8.3):
+	 *  a. Client has performed active-close, has sent a Close to the server
+	 *     from state OPEN or PARTOPEN, and is waiting for the final Reset
+	 *     (in this case, SOCK_DONE == 1).
+	 *  b. Client is asked to perform passive-close, by receiving a CloseReq
+	 *     in (PART)OPEN state. It sends a Close and waits for final Reset
+	 *     (in this case, SOCK_DONE == 0).
+	 *  c. Server performs an active-close as in (a), keeps TIMEWAIT state.
+	 *
+	 * 3) The following intermediate states are employed to give passively
+	 *    closing nodes a chance to process their unread data:
+	 *    - PASSIVE_CLOSE    (from OPEN => CLOSED) and
+	 *    - PASSIVE_CLOSEREQ (from (PART)OPEN to CLOSING; case (b) above).
+	 */
+	DCCP_ACTIVE_CLOSEREQ = TCP_FIN_WAIT1,
+	DCCP_PASSIVE_CLOSE   = TCP_CLOSE_WAIT,	/* any node receiving a Close */
+	DCCP_CLOSING	     = TCP_CLOSING,
+	DCCP_TIME_WAIT	     = TCP_TIME_WAIT,
+	DCCP_CLOSED	     = TCP_CLOSE,
+	DCCP_PARTOPEN	     = TCP_MAX_STATES,
+	DCCP_PASSIVE_CLOSEREQ,			/* clients receiving CloseReq */
+	DCCP_MAX_STATES
+};
+
+enum {
+	DCCPF_OPEN	      = TCPF_ESTABLISHED,
+	DCCPF_REQUESTING      = TCPF_SYN_SENT,
+	DCCPF_LISTEN	      = TCPF_LISTEN,
+	DCCPF_RESPOND	      = TCPF_SYN_RECV,
+	DCCPF_ACTIVE_CLOSEREQ = TCPF_FIN_WAIT1,
+	DCCPF_CLOSING	      = TCPF_CLOSING,
+	DCCPF_TIME_WAIT	      = TCPF_TIME_WAIT,
+	DCCPF_CLOSED	      = TCPF_CLOSE,
+	DCCPF_PARTOPEN	      = (1 << DCCP_PARTOPEN),
+};
+
+static inline struct dccp_hdr *dccp_hdr(const struct sk_buff *skb)
+{
+	return (struct dccp_hdr *)skb_transport_header(skb);
+}
+
+static inline struct dccp_hdr *dccp_zeroed_hdr(struct sk_buff *skb, int headlen)
+{
+	skb_push(skb, headlen);
+	skb_reset_transport_header(skb);
+	return memset(skb_transport_header(skb), 0, headlen);
+}
+
+static inline struct dccp_hdr_ext *dccp_hdrx(const struct dccp_hdr *dh)
+{
+	return (struct dccp_hdr_ext *)((unsigned char *)dh + sizeof(*dh));
+}
+
+static inline unsigned int __dccp_basic_hdr_len(const struct dccp_hdr *dh)
+{
+	return sizeof(*dh) + (dh->dccph_x ? sizeof(struct dccp_hdr_ext) : 0);
+}
+
+static inline unsigned int dccp_basic_hdr_len(const struct sk_buff *skb)
+{
+	const struct dccp_hdr *dh = dccp_hdr(skb);
+	return __dccp_basic_hdr_len(dh);
+}
+
+static inline __u64 dccp_hdr_seq(const struct dccp_hdr *dh)
+{
+	__u64 seq_nr =  ntohs(dh->dccph_seq);
+
+	if (dh->dccph_x != 0)
+		seq_nr = (seq_nr << 32) + ntohl(dccp_hdrx(dh)->dccph_seq_low);
+	else
+		seq_nr += (u32)dh->dccph_seq2 << 16;
+
+	return seq_nr;
+}
+
+static inline struct dccp_hdr_request *dccp_hdr_request(struct sk_buff *skb)
+{
+	return (struct dccp_hdr_request *)(skb_transport_header(skb) +
+					   dccp_basic_hdr_len(skb));
+}
+
+static inline struct dccp_hdr_ack_bits *dccp_hdr_ack_bits(const struct sk_buff *skb)
+{
+	return (struct dccp_hdr_ack_bits *)(skb_transport_header(skb) +
+					    dccp_basic_hdr_len(skb));
+}
+
+static inline u64 dccp_hdr_ack_seq(const struct sk_buff *skb)
+{
+	const struct dccp_hdr_ack_bits *dhack = dccp_hdr_ack_bits(skb);
+	return ((u64)ntohs(dhack->dccph_ack_nr_high) << 32) + ntohl(dhack->dccph_ack_nr_low);
+}
+
+static inline struct dccp_hdr_response *dccp_hdr_response(struct sk_buff *skb)
+{
+	return (struct dccp_hdr_response *)(skb_transport_header(skb) +
+					    dccp_basic_hdr_len(skb));
+}
+
+static inline struct dccp_hdr_reset *dccp_hdr_reset(struct sk_buff *skb)
+{
+	return (struct dccp_hdr_reset *)(skb_transport_header(skb) +
+					 dccp_basic_hdr_len(skb));
+}
+
+static inline unsigned int __dccp_hdr_len(const struct dccp_hdr *dh)
+{
+	return __dccp_basic_hdr_len(dh) +
+	       dccp_packet_hdr_len(dh->dccph_type);
+}
+
+static inline unsigned int dccp_hdr_len(const struct sk_buff *skb)
+{
+	return __dccp_hdr_len(dccp_hdr(skb));
+}
+
+/**
+ * struct dccp_request_sock  -  represent DCCP-specific connection request
+ * @dreq_inet_rsk: structure inherited from
+ * @dreq_iss: initial sequence number, sent on the first Response (RFC 4340, 7.1)
+ * @dreq_gss: greatest sequence number sent (for retransmitted Responses)
+ * @dreq_isr: initial sequence number received in the first Request
+ * @dreq_gsr: greatest sequence number received (for retransmitted Request(s))
+ * @dreq_service: service code present on the Request (there is just one)
+ * @dreq_featneg: feature negotiation options for this connection
+ * The following two fields are analogous to the ones in dccp_sock:
+ * @dreq_timestamp_echo: last received timestamp to echo (13.1)
+ * @dreq_timestamp_echo: the time of receiving the last @dreq_timestamp_echo
+ */
+struct dccp_request_sock {
+	struct inet_request_sock dreq_inet_rsk;
+	__u64			 dreq_iss;
+	__u64			 dreq_gss;
+	__u64			 dreq_isr;
+	__u64			 dreq_gsr;
+	__be32			 dreq_service;
+	struct list_head	 dreq_featneg;
+	__u32			 dreq_timestamp_echo;
+	__u32			 dreq_timestamp_time;
+};
+
+static inline struct dccp_request_sock *dccp_rsk(const struct request_sock *req)
+{
+	return (struct dccp_request_sock *)req;
+}
+
+extern struct inet_timewait_death_row dccp_death_row;
+
+extern int dccp_parse_options(struct sock *sk, struct dccp_request_sock *dreq,
+			      struct sk_buff *skb);
+
+struct dccp_options_received {
+	u64	dccpor_ndp:48;
+	u32	dccpor_timestamp;
+	u32	dccpor_timestamp_echo;
+	u32	dccpor_elapsed_time;
+};
+
+struct ccid;
+
+enum dccp_role {
+	DCCP_ROLE_UNDEFINED,
+	DCCP_ROLE_LISTEN,
+	DCCP_ROLE_CLIENT,
+	DCCP_ROLE_SERVER,
+};
+
+struct dccp_service_list {
+	__u32	dccpsl_nr;
+	__be32	dccpsl_list[0];
+};
+
+#define DCCP_SERVICE_INVALID_VALUE htonl((__u32)-1)
+#define DCCP_SERVICE_CODE_IS_ABSENT		0
+
+static inline int dccp_list_has_service(const struct dccp_service_list *sl,
+					const __be32 service)
+{
+	if (likely(sl != NULL)) {
+		u32 i = sl->dccpsl_nr;
+		while (i--)
+			if (sl->dccpsl_list[i] == service)
+				return 1;
+	}
+	return 0;
+}
+
+struct dccp_ackvec;
+
+/**
+ * struct dccp_sock - DCCP socket state
+ *
+ * @dccps_swl - sequence number window low
+ * @dccps_swh - sequence number window high
+ * @dccps_awl - acknowledgement number window low
+ * @dccps_awh - acknowledgement number window high
+ * @dccps_iss - initial sequence number sent
+ * @dccps_isr - initial sequence number received
+ * @dccps_osr - first OPEN sequence number received
+ * @dccps_gss - greatest sequence number sent
+ * @dccps_gsr - greatest valid sequence number received
+ * @dccps_gar - greatest valid ack number received on a non-Sync; initialized to %dccps_iss
+ * @dccps_service - first (passive sock) or unique (active sock) service code
+ * @dccps_service_list - second .. last service code on passive socket
+ * @dccps_timestamp_echo - latest timestamp received on a TIMESTAMP option
+ * @dccps_timestamp_time - time of receiving latest @dccps_timestamp_echo
+ * @dccps_l_ack_ratio - feature-local Ack Ratio
+ * @dccps_r_ack_ratio - feature-remote Ack Ratio
+ * @dccps_l_seq_win - local Sequence Window (influences ack number validity)
+ * @dccps_r_seq_win - remote Sequence Window (influences seq number validity)
+ * @dccps_pcslen - sender   partial checksum coverage (via sockopt)
+ * @dccps_pcrlen - receiver partial checksum coverage (via sockopt)
+ * @dccps_send_ndp_count - local Send NDP Count feature (7.7.2)
+ * @dccps_ndp_count - number of Non Data Packets since last data packet
+ * @dccps_mss_cache - current value of MSS (path MTU minus header sizes)
+ * @dccps_rate_last - timestamp for rate-limiting DCCP-Sync (RFC 4340, 7.5.4)
+ * @dccps_featneg - tracks feature-negotiation state (mostly during handshake)
+ * @dccps_hc_rx_ackvec - rx half connection ack vector
+ * @dccps_hc_rx_ccid - CCID used for the receiver (or receiving half-connection)
+ * @dccps_hc_tx_ccid - CCID used for the sender (or sending half-connection)
+ * @dccps_options_received - parsed set of retrieved options
+ * @dccps_qpolicy - TX dequeueing policy, one of %dccp_packet_dequeueing_policy
+ * @dccps_tx_qlen - maximum length of the TX queue
+ * @dccps_role - role of this sock, one of %dccp_role
+ * @dccps_hc_rx_insert_options - receiver wants to add options when acking
+ * @dccps_hc_tx_insert_options - sender wants to add options when sending
+ * @dccps_server_timewait - server holds timewait state on close (RFC 4340, 8.3)
+ * @dccps_sync_scheduled - flag which signals "send out-of-band message soon"
+ * @dccps_xmitlet - tasklet scheduled by the TX CCID to dequeue data packets
+ * @dccps_xmit_timer - used by the TX CCID to delay sending (rate-based pacing)
+ * @dccps_syn_rtt - RTT sample from Request/Response exchange (in usecs)
+ */
+struct dccp_sock {
+	/* inet_connection_sock has to be the first member of dccp_sock */
+	struct inet_connection_sock	dccps_inet_connection;
+#define dccps_syn_rtt			dccps_inet_connection.icsk_ack.lrcvtime
+	__u64				dccps_swl;
+	__u64				dccps_swh;
+	__u64				dccps_awl;
+	__u64				dccps_awh;
+	__u64				dccps_iss;
+	__u64				dccps_isr;
+	__u64				dccps_osr;
+	__u64				dccps_gss;
+	__u64				dccps_gsr;
+	__u64				dccps_gar;
+	__be32				dccps_service;
+	__u32				dccps_mss_cache;
+	struct dccp_service_list	*dccps_service_list;
+	__u32				dccps_timestamp_echo;
+	__u32				dccps_timestamp_time;
+	__u16				dccps_l_ack_ratio;
+	__u16				dccps_r_ack_ratio;
+	__u64				dccps_l_seq_win:48;
+	__u64				dccps_r_seq_win:48;
+	__u8				dccps_pcslen:4;
+	__u8				dccps_pcrlen:4;
+	__u8				dccps_send_ndp_count:1;
+	__u64				dccps_ndp_count:48;
+	unsigned long			dccps_rate_last;
+	struct list_head		dccps_featneg;
+	struct dccp_ackvec		*dccps_hc_rx_ackvec;
+	struct ccid			*dccps_hc_rx_ccid;
+	struct ccid			*dccps_hc_tx_ccid;
+	struct dccp_options_received	dccps_options_received;
+	__u8				dccps_qpolicy;
+	__u32				dccps_tx_qlen;
+	enum dccp_role			dccps_role:2;
+	__u8				dccps_hc_rx_insert_options:1;
+	__u8				dccps_hc_tx_insert_options:1;
+	__u8				dccps_server_timewait:1;
+	__u8				dccps_sync_scheduled:1;
+	struct tasklet_struct		dccps_xmitlet;
+	struct timer_list		dccps_xmit_timer;
+};
+
+static inline struct dccp_sock *dccp_sk(const struct sock *sk)
+{
+	return (struct dccp_sock *)sk;
+}
+
+static inline const char *dccp_role(const struct sock *sk)
+{
+	switch (dccp_sk(sk)->dccps_role) {
+	case DCCP_ROLE_UNDEFINED: return "undefined";
+	case DCCP_ROLE_LISTEN:	  return "listen";
+	case DCCP_ROLE_SERVER:	  return "server";
+	case DCCP_ROLE_CLIENT:	  return "client";
+	}
+	return NULL;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_DCCP_H */
diff --git a/include/linux/dcookies.h b/include/linux/dcookies.h
new file mode 100644
index 00000000..5ac3bdd5
--- /dev/null
+++ b/include/linux/dcookies.h
@@ -0,0 +1,68 @@
+/*
+ * dcookies.h
+ *
+ * Persistent cookie-path mappings
+ *
+ * Copyright 2002 John Levon <levon@movementarian.org>
+ */
+
+#ifndef DCOOKIES_H
+#define DCOOKIES_H
+ 
+
+#ifdef CONFIG_PROFILING
+ 
+#include <linux/dcache.h>
+#include <linux/types.h>
+ 
+struct dcookie_user;
+struct path;
+ 
+/**
+ * dcookie_register - register a user of dcookies
+ *
+ * Register as a dcookie user. Returns %NULL on failure.
+ */
+struct dcookie_user * dcookie_register(void);
+
+/**
+ * dcookie_unregister - unregister a user of dcookies
+ *
+ * Unregister as a dcookie user. This may invalidate
+ * any dcookie values returned from get_dcookie().
+ */
+void dcookie_unregister(struct dcookie_user * user);
+  
+/**
+ * get_dcookie - acquire a dcookie
+ *
+ * Convert the given dentry/vfsmount pair into
+ * a cookie value.
+ *
+ * Returns -EINVAL if no living task has registered as a
+ * dcookie user.
+ *
+ * Returns 0 on success, with *cookie filled in
+ */
+int get_dcookie(struct path *path, unsigned long *cookie);
+
+#else
+
+static inline struct dcookie_user * dcookie_register(void)
+{
+	return NULL;
+}
+
+static inline void dcookie_unregister(struct dcookie_user * user)
+{
+	return;
+}
+
+static inline int get_dcookie(struct path *path, unsigned long *cookie)
+{
+	return -ENOSYS;
+}
+
+#endif /* CONFIG_PROFILING */
+
+#endif /* DCOOKIES_H */
diff --git a/include/linux/debug_locks.h b/include/linux/debug_locks.h
new file mode 100644
index 00000000..3bd46f76
--- /dev/null
+++ b/include/linux/debug_locks.h
@@ -0,0 +1,75 @@
+#ifndef __LINUX_DEBUG_LOCKING_H
+#define __LINUX_DEBUG_LOCKING_H
+
+#include <linux/kernel.h>
+#include <linux/atomic.h>
+#include <linux/bug.h>
+
+struct task_struct;
+
+extern int debug_locks;
+extern int debug_locks_silent;
+
+
+static inline int __debug_locks_off(void)
+{
+	return xchg(&debug_locks, 0);
+}
+
+/*
+ * Generic 'turn off all lock debugging' function:
+ */
+extern int debug_locks_off(void);
+
+#define DEBUG_LOCKS_WARN_ON(c)						\
+({									\
+	int __ret = 0;							\
+									\
+	if (!oops_in_progress && unlikely(c)) {				\
+		if (debug_locks_off() && !debug_locks_silent)		\
+			WARN_ON(1);					\
+		__ret = 1;						\
+	}								\
+	__ret;								\
+})
+
+#ifdef CONFIG_SMP
+# define SMP_DEBUG_LOCKS_WARN_ON(c)			DEBUG_LOCKS_WARN_ON(c)
+#else
+# define SMP_DEBUG_LOCKS_WARN_ON(c)			do { } while (0)
+#endif
+
+#ifdef CONFIG_DEBUG_LOCKING_API_SELFTESTS
+  extern void locking_selftest(void);
+#else
+# define locking_selftest()	do { } while (0)
+#endif
+
+struct task_struct;
+
+#ifdef CONFIG_LOCKDEP
+extern void debug_show_all_locks(void);
+extern void debug_show_held_locks(struct task_struct *task);
+extern void debug_check_no_locks_freed(const void *from, unsigned long len);
+extern void debug_check_no_locks_held(struct task_struct *task);
+#else
+static inline void debug_show_all_locks(void)
+{
+}
+
+static inline void debug_show_held_locks(struct task_struct *task)
+{
+}
+
+static inline void
+debug_check_no_locks_freed(const void *from, unsigned long len)
+{
+}
+
+static inline void
+debug_check_no_locks_held(struct task_struct *task)
+{
+}
+#endif
+
+#endif
diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h
new file mode 100644
index 00000000..ae36b72c
--- /dev/null
+++ b/include/linux/debugfs.h
@@ -0,0 +1,224 @@
+/*
+ *  debugfs.h - a tiny little debug file system
+ *
+ *  Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com>
+ *  Copyright (C) 2004 IBM Inc.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License version
+ *	2 as published by the Free Software Foundation.
+ *
+ *  debugfs is for people to use instead of /proc or /sys.
+ *  See Documentation/DocBook/filesystems for more details.
+ */
+
+#ifndef _DEBUGFS_H_
+#define _DEBUGFS_H_
+
+#include <linux/fs.h>
+#include <linux/seq_file.h>
+
+#include <linux/types.h>
+
+struct file_operations;
+
+struct debugfs_blob_wrapper {
+	void *data;
+	unsigned long size;
+};
+
+struct debugfs_reg32 {
+	char *name;
+	unsigned long offset;
+};
+
+struct debugfs_regset32 {
+	struct debugfs_reg32 *regs;
+	int nregs;
+	void __iomem *base;
+};
+
+extern struct dentry *arch_debugfs_dir;
+
+#if defined(CONFIG_DEBUG_FS)
+
+/* declared over in file.c */
+extern const struct file_operations debugfs_file_operations;
+extern const struct inode_operations debugfs_link_operations;
+
+struct dentry *debugfs_create_file(const char *name, umode_t mode,
+				   struct dentry *parent, void *data,
+				   const struct file_operations *fops);
+
+struct dentry *debugfs_create_dir(const char *name, struct dentry *parent);
+
+struct dentry *debugfs_create_symlink(const char *name, struct dentry *parent,
+				      const char *dest);
+
+void debugfs_remove(struct dentry *dentry);
+void debugfs_remove_recursive(struct dentry *dentry);
+
+struct dentry *debugfs_rename(struct dentry *old_dir, struct dentry *old_dentry,
+                struct dentry *new_dir, const char *new_name);
+
+struct dentry *debugfs_create_u8(const char *name, umode_t mode,
+				 struct dentry *parent, u8 *value);
+struct dentry *debugfs_create_u16(const char *name, umode_t mode,
+				  struct dentry *parent, u16 *value);
+struct dentry *debugfs_create_u32(const char *name, umode_t mode,
+				  struct dentry *parent, u32 *value);
+struct dentry *debugfs_create_u64(const char *name, umode_t mode,
+				  struct dentry *parent, u64 *value);
+struct dentry *debugfs_create_x8(const char *name, umode_t mode,
+				 struct dentry *parent, u8 *value);
+struct dentry *debugfs_create_x16(const char *name, umode_t mode,
+				  struct dentry *parent, u16 *value);
+struct dentry *debugfs_create_x32(const char *name, umode_t mode,
+				  struct dentry *parent, u32 *value);
+struct dentry *debugfs_create_x64(const char *name, umode_t mode,
+				  struct dentry *parent, u64 *value);
+struct dentry *debugfs_create_size_t(const char *name, umode_t mode,
+				     struct dentry *parent, size_t *value);
+struct dentry *debugfs_create_bool(const char *name, umode_t mode,
+				  struct dentry *parent, u32 *value);
+
+struct dentry *debugfs_create_blob(const char *name, umode_t mode,
+				  struct dentry *parent,
+				  struct debugfs_blob_wrapper *blob);
+
+struct dentry *debugfs_create_regset32(const char *name, umode_t mode,
+				     struct dentry *parent,
+				     struct debugfs_regset32 *regset);
+
+int debugfs_print_regs32(struct seq_file *s, const struct debugfs_reg32 *regs,
+			 int nregs, void __iomem *base, char *prefix);
+
+bool debugfs_initialized(void);
+
+#else
+
+#include <linux/err.h>
+
+/* 
+ * We do not return NULL from these functions if CONFIG_DEBUG_FS is not enabled
+ * so users have a chance to detect if there was a real error or not.  We don't
+ * want to duplicate the design decision mistakes of procfs and devfs again.
+ */
+
+static inline struct dentry *debugfs_create_file(const char *name, umode_t mode,
+					struct dentry *parent, void *data,
+					const struct file_operations *fops)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline struct dentry *debugfs_create_dir(const char *name,
+						struct dentry *parent)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline struct dentry *debugfs_create_symlink(const char *name,
+						    struct dentry *parent,
+						    const char *dest)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline void debugfs_remove(struct dentry *dentry)
+{ }
+
+static inline void debugfs_remove_recursive(struct dentry *dentry)
+{ }
+
+static inline struct dentry *debugfs_rename(struct dentry *old_dir, struct dentry *old_dentry,
+                struct dentry *new_dir, char *new_name)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline struct dentry *debugfs_create_u8(const char *name, umode_t mode,
+					       struct dentry *parent,
+					       u8 *value)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline struct dentry *debugfs_create_u16(const char *name, umode_t mode,
+						struct dentry *parent,
+						u16 *value)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline struct dentry *debugfs_create_u32(const char *name, umode_t mode,
+						struct dentry *parent,
+						u32 *value)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline struct dentry *debugfs_create_u64(const char *name, umode_t mode,
+						struct dentry *parent,
+						u64 *value)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline struct dentry *debugfs_create_x8(const char *name, umode_t mode,
+					       struct dentry *parent,
+					       u8 *value)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline struct dentry *debugfs_create_x16(const char *name, umode_t mode,
+						struct dentry *parent,
+						u16 *value)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline struct dentry *debugfs_create_x32(const char *name, umode_t mode,
+						struct dentry *parent,
+						u32 *value)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline struct dentry *debugfs_create_size_t(const char *name, umode_t mode,
+				     struct dentry *parent,
+				     size_t *value)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline struct dentry *debugfs_create_bool(const char *name, umode_t mode,
+						 struct dentry *parent,
+						 u32 *value)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline struct dentry *debugfs_create_blob(const char *name, umode_t mode,
+				  struct dentry *parent,
+				  struct debugfs_blob_wrapper *blob)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline struct dentry *debugfs_create_regset32(const char *name,
+				   umode_t mode, struct dentry *parent,
+				   struct debugfs_regset32 *regset)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline bool debugfs_initialized(void)
+{
+	return false;
+}
+
+#endif
+
+#endif
diff --git a/include/linux/debugobjects.h b/include/linux/debugobjects.h
new file mode 100644
index 00000000..0e5f5785
--- /dev/null
+++ b/include/linux/debugobjects.h
@@ -0,0 +1,110 @@
+#ifndef _LINUX_DEBUGOBJECTS_H
+#define _LINUX_DEBUGOBJECTS_H
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+enum debug_obj_state {
+	ODEBUG_STATE_NONE,
+	ODEBUG_STATE_INIT,
+	ODEBUG_STATE_INACTIVE,
+	ODEBUG_STATE_ACTIVE,
+	ODEBUG_STATE_DESTROYED,
+	ODEBUG_STATE_NOTAVAILABLE,
+	ODEBUG_STATE_MAX,
+};
+
+struct debug_obj_descr;
+
+/**
+ * struct debug_obj - representaion of an tracked object
+ * @node:	hlist node to link the object into the tracker list
+ * @state:	tracked object state
+ * @astate:	current active state
+ * @object:	pointer to the real object
+ * @descr:	pointer to an object type specific debug description structure
+ */
+struct debug_obj {
+	struct hlist_node	node;
+	enum debug_obj_state	state;
+	unsigned int		astate;
+	void			*object;
+	struct debug_obj_descr	*descr;
+};
+
+/**
+ * struct debug_obj_descr - object type specific debug description structure
+ *
+ * @name:		name of the object typee
+ * @debug_hint:		function returning address, which have associated
+ *			kernel symbol, to allow identify the object
+ * @fixup_init:		fixup function, which is called when the init check
+ *			fails
+ * @fixup_activate:	fixup function, which is called when the activate check
+ *			fails
+ * @fixup_destroy:	fixup function, which is called when the destroy check
+ *			fails
+ * @fixup_free:		fixup function, which is called when the free check
+ *			fails
+ * @fixup_assert_init:  fixup function, which is called when the assert_init
+ *			check fails
+ */
+struct debug_obj_descr {
+	const char		*name;
+	void *(*debug_hint)	(void *addr);
+	int (*fixup_init)	(void *addr, enum debug_obj_state state);
+	int (*fixup_activate)	(void *addr, enum debug_obj_state state);
+	int (*fixup_destroy)	(void *addr, enum debug_obj_state state);
+	int (*fixup_free)	(void *addr, enum debug_obj_state state);
+	int (*fixup_assert_init)(void *addr, enum debug_obj_state state);
+};
+
+#ifdef CONFIG_DEBUG_OBJECTS
+extern void debug_object_init      (void *addr, struct debug_obj_descr *descr);
+extern void
+debug_object_init_on_stack(void *addr, struct debug_obj_descr *descr);
+extern void debug_object_activate  (void *addr, struct debug_obj_descr *descr);
+extern void debug_object_deactivate(void *addr, struct debug_obj_descr *descr);
+extern void debug_object_destroy   (void *addr, struct debug_obj_descr *descr);
+extern void debug_object_free      (void *addr, struct debug_obj_descr *descr);
+extern void debug_object_assert_init(void *addr, struct debug_obj_descr *descr);
+
+/*
+ * Active state:
+ * - Set at 0 upon initialization.
+ * - Must return to 0 before deactivation.
+ */
+extern void
+debug_object_active_state(void *addr, struct debug_obj_descr *descr,
+			  unsigned int expect, unsigned int next);
+
+extern void debug_objects_early_init(void);
+extern void debug_objects_mem_init(void);
+#else
+static inline void
+debug_object_init      (void *addr, struct debug_obj_descr *descr) { }
+static inline void
+debug_object_init_on_stack(void *addr, struct debug_obj_descr *descr) { }
+static inline void
+debug_object_activate  (void *addr, struct debug_obj_descr *descr) { }
+static inline void
+debug_object_deactivate(void *addr, struct debug_obj_descr *descr) { }
+static inline void
+debug_object_destroy   (void *addr, struct debug_obj_descr *descr) { }
+static inline void
+debug_object_free      (void *addr, struct debug_obj_descr *descr) { }
+static inline void
+debug_object_assert_init(void *addr, struct debug_obj_descr *descr) { }
+
+static inline void debug_objects_early_init(void) { }
+static inline void debug_objects_mem_init(void) { }
+#endif
+
+#ifdef CONFIG_DEBUG_OBJECTS_FREE
+extern void debug_check_no_obj_freed(const void *address, unsigned long size);
+#else
+static inline void
+debug_check_no_obj_freed(const void *address, unsigned long size) { }
+#endif
+
+#endif
diff --git a/include/linux/decompress/bunzip2.h b/include/linux/decompress/bunzip2.h
new file mode 100644
index 00000000..11527213
--- /dev/null
+++ b/include/linux/decompress/bunzip2.h
@@ -0,0 +1,10 @@
+#ifndef DECOMPRESS_BUNZIP2_H
+#define DECOMPRESS_BUNZIP2_H
+
+int bunzip2(unsigned char *inbuf, int len,
+	    int(*fill)(void*, unsigned int),
+	    int(*flush)(void*, unsigned int),
+	    unsigned char *output,
+	    int *pos,
+	    void(*error)(char *x));
+#endif
diff --git a/include/linux/decompress/generic.h b/include/linux/decompress/generic.h
new file mode 100644
index 00000000..0c7111a5
--- /dev/null
+++ b/include/linux/decompress/generic.h
@@ -0,0 +1,39 @@
+#ifndef DECOMPRESS_GENERIC_H
+#define DECOMPRESS_GENERIC_H
+
+typedef int (*decompress_fn) (unsigned char *inbuf, int len,
+			      int(*fill)(void*, unsigned int),
+			      int(*flush)(void*, unsigned int),
+			      unsigned char *outbuf,
+			      int *posp,
+			      void(*error)(char *x));
+
+/* inbuf   - input buffer
+ *len     - len of pre-read data in inbuf
+ *fill    - function to fill inbuf when empty
+ *flush   - function to write out outbuf
+ *outbuf  - output buffer
+ *posp    - if non-null, input position (number of bytes read) will be
+ *	  returned here
+ *
+ *If len != 0, inbuf should contain all the necessary input data, and fill
+ *should be NULL
+ *If len = 0, inbuf can be NULL, in which case the decompressor will allocate
+ *the input buffer.  If inbuf != NULL it must be at least XXX_IOBUF_SIZE bytes.
+ *fill will be called (repeatedly...) to read data, at most XXX_IOBUF_SIZE
+ *bytes should be read per call.  Replace XXX with the appropriate decompressor
+ *name, i.e. LZMA_IOBUF_SIZE.
+ *
+ *If flush = NULL, outbuf must be large enough to buffer all the expected
+ *output.  If flush != NULL, the output buffer will be allocated by the
+ *decompressor (outbuf = NULL), and the flush function will be called to
+ *flush the output buffer at the appropriate time (decompressor and stream
+ *dependent).
+ */
+
+
+/* Utility routine to detect the decompression method */
+decompress_fn decompress_method(const unsigned char *inbuf, int len,
+				const char **name);
+
+#endif
diff --git a/include/linux/decompress/inflate.h b/include/linux/decompress/inflate.h
new file mode 100644
index 00000000..8c0aef1b
--- /dev/null
+++ b/include/linux/decompress/inflate.h
@@ -0,0 +1,10 @@
+#ifndef INFLATE_H
+#define INFLATE_H
+
+int gunzip(unsigned char *inbuf, int len,
+	   int(*fill)(void*, unsigned int),
+	   int(*flush)(void*, unsigned int),
+	   unsigned char *output,
+	   int *pos,
+	   void(*error_fn)(char *x));
+#endif
diff --git a/include/linux/decompress/mm.h b/include/linux/decompress/mm.h
new file mode 100644
index 00000000..7925bf0e
--- /dev/null
+++ b/include/linux/decompress/mm.h
@@ -0,0 +1,93 @@
+/*
+ * linux/compr_mm.h
+ *
+ * Memory management for pre-boot and ramdisk uncompressors
+ *
+ * Authors: Alain Knaff <alain@knaff.lu>
+ *
+ */
+
+#ifndef DECOMPR_MM_H
+#define DECOMPR_MM_H
+
+#ifdef STATIC
+
+/* Code active when included from pre-boot environment: */
+
+/*
+ * Some architectures want to ensure there is no local data in their
+ * pre-boot environment, so that data can arbitrarily relocated (via
+ * GOT references).  This is achieved by defining STATIC_RW_DATA to
+ * be null.
+ */
+#ifndef STATIC_RW_DATA
+#define STATIC_RW_DATA static
+#endif
+
+/* A trivial malloc implementation, adapted from
+ *  malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
+ */
+STATIC_RW_DATA unsigned long malloc_ptr;
+STATIC_RW_DATA int malloc_count;
+
+static void *malloc(int size)
+{
+	void *p;
+
+	if (size < 0)
+		return NULL;
+	if (!malloc_ptr)
+		malloc_ptr = free_mem_ptr;
+
+	malloc_ptr = (malloc_ptr + 3) & ~3;     /* Align */
+
+	p = (void *)malloc_ptr;
+	malloc_ptr += size;
+
+	if (free_mem_end_ptr && malloc_ptr >= free_mem_end_ptr)
+		return NULL;
+
+	malloc_count++;
+	return p;
+}
+
+static void free(void *where)
+{
+	malloc_count--;
+	if (!malloc_count)
+		malloc_ptr = free_mem_ptr;
+}
+
+#define large_malloc(a) malloc(a)
+#define large_free(a) free(a)
+
+#define INIT
+
+#else /* STATIC */
+
+/* Code active when compiled standalone for use when loading ramdisk: */
+
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+
+/* Use defines rather than static inline in order to avoid spurious
+ * warnings when not needed (indeed large_malloc / large_free are not
+ * needed by inflate */
+
+#define malloc(a) kmalloc(a, GFP_KERNEL)
+#define free(a) kfree(a)
+
+#define large_malloc(a) vmalloc(a)
+#define large_free(a) vfree(a)
+
+#define INIT __init
+#define STATIC
+
+#include <linux/init.h>
+
+#endif /* STATIC */
+
+#endif /* DECOMPR_MM_H */
diff --git a/include/linux/decompress/unlz4.h b/include/linux/decompress/unlz4.h
new file mode 100755
index 00000000..d5b68bf3
--- /dev/null
+++ b/include/linux/decompress/unlz4.h
@@ -0,0 +1,10 @@
+#ifndef DECOMPRESS_UNLZ4_H
+#define DECOMPRESS_UNLZ4_H
+
+int unlz4(unsigned char *inbuf, int len,
+	int(*fill)(void*, unsigned int),
+	int(*flush)(void*, unsigned int),
+	unsigned char *output,
+	int *pos,
+	void(*error)(char *x));
+#endif
diff --git a/include/linux/decompress/unlzma.h b/include/linux/decompress/unlzma.h
new file mode 100644
index 00000000..7796538f
--- /dev/null
+++ b/include/linux/decompress/unlzma.h
@@ -0,0 +1,12 @@
+#ifndef DECOMPRESS_UNLZMA_H
+#define DECOMPRESS_UNLZMA_H
+
+int unlzma(unsigned char *, int,
+	   int(*fill)(void*, unsigned int),
+	   int(*flush)(void*, unsigned int),
+	   unsigned char *output,
+	   int *posp,
+	   void(*error)(char *x)
+	);
+
+#endif
diff --git a/include/linux/decompress/unlzo.h b/include/linux/decompress/unlzo.h
new file mode 100644
index 00000000..98722975
--- /dev/null
+++ b/include/linux/decompress/unlzo.h
@@ -0,0 +1,10 @@
+#ifndef DECOMPRESS_UNLZO_H
+#define DECOMPRESS_UNLZO_H
+
+int unlzo(unsigned char *inbuf, int len,
+	int(*fill)(void*, unsigned int),
+	int(*flush)(void*, unsigned int),
+	unsigned char *output,
+	int *pos,
+	void(*error)(char *x));
+#endif
diff --git a/include/linux/decompress/unxz.h b/include/linux/decompress/unxz.h
new file mode 100644
index 00000000..41728fc6
--- /dev/null
+++ b/include/linux/decompress/unxz.h
@@ -0,0 +1,19 @@
+/*
+ * Wrapper for decompressing XZ-compressed kernel, initramfs, and initrd
+ *
+ * Author: Lasse Collin <lasse.collin@tukaani.org>
+ *
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
+ */
+
+#ifndef DECOMPRESS_UNXZ_H
+#define DECOMPRESS_UNXZ_H
+
+int unxz(unsigned char *in, int in_size,
+	 int (*fill)(void *dest, unsigned int size),
+	 int (*flush)(void *src, unsigned int size),
+	 unsigned char *out, int *in_used,
+	 void (*error)(char *x));
+
+#endif
diff --git a/include/linux/delay.h b/include/linux/delay.h
new file mode 100644
index 00000000..a6ecb34c
--- /dev/null
+++ b/include/linux/delay.h
@@ -0,0 +1,55 @@
+#ifndef _LINUX_DELAY_H
+#define _LINUX_DELAY_H
+
+/*
+ * Copyright (C) 1993 Linus Torvalds
+ *
+ * Delay routines, using a pre-computed "loops_per_jiffy" value.
+ */
+
+#include <linux/kernel.h>
+
+extern unsigned long loops_per_jiffy;
+
+#include <asm/delay.h>
+
+/*
+ * Using udelay() for intervals greater than a few milliseconds can
+ * risk overflow for high loops_per_jiffy (high bogomips) machines. The
+ * mdelay() provides a wrapper to prevent this.  For delays greater
+ * than MAX_UDELAY_MS milliseconds, the wrapper is used.  Architecture
+ * specific values can be defined in asm-???/delay.h as an override.
+ * The 2nd mdelay() definition ensures GCC will optimize away the 
+ * while loop for the common cases where n <= MAX_UDELAY_MS  --  Paul G.
+ */
+
+#ifndef MAX_UDELAY_MS
+#define MAX_UDELAY_MS	5
+#endif
+
+#ifndef mdelay
+#define mdelay(n) (\
+	(__builtin_constant_p(n) && (n)<=MAX_UDELAY_MS) ? udelay((n)*1000) : \
+	({unsigned long __ms=(n); while (__ms--) udelay(1000);}))
+#endif
+
+#ifndef ndelay
+static inline void ndelay(unsigned long x)
+{
+	udelay(DIV_ROUND_UP(x, 1000));
+}
+#define ndelay(x) ndelay(x)
+#endif
+
+extern unsigned long lpj_fine;
+void calibrate_delay(void);
+void msleep(unsigned int msecs);
+unsigned long msleep_interruptible(unsigned int msecs);
+void usleep_range(unsigned long min, unsigned long max);
+
+static inline void ssleep(unsigned int seconds)
+{
+	msleep(seconds * 1000);
+}
+
+#endif /* defined(_LINUX_DELAY_H) */
diff --git a/include/linux/delayacct.h b/include/linux/delayacct.h
new file mode 100644
index 00000000..6cee17c2
--- /dev/null
+++ b/include/linux/delayacct.h
@@ -0,0 +1,153 @@
+/* delayacct.h - per-task delay accounting
+ *
+ * Copyright (C) Shailabh Nagar, IBM Corp. 2006
+ *
+ * This program is free software;  you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY;  without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ * the GNU General Public License for more details.
+ *
+ */
+
+#ifndef _LINUX_DELAYACCT_H
+#define _LINUX_DELAYACCT_H
+
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+/*
+ * Per-task flags relevant to delay accounting
+ * maintained privately to avoid exhausting similar flags in sched.h:PF_*
+ * Used to set current->delays->flags
+ */
+#define DELAYACCT_PF_SWAPIN	0x00000001	/* I am doing a swapin */
+#define DELAYACCT_PF_BLKIO	0x00000002	/* I am waiting on IO */
+
+#ifdef CONFIG_TASK_DELAY_ACCT
+
+extern int delayacct_on;	/* Delay accounting turned on/off */
+extern struct kmem_cache *delayacct_cache;
+extern void delayacct_init(void);
+extern void __delayacct_tsk_init(struct task_struct *);
+extern void __delayacct_tsk_exit(struct task_struct *);
+extern void __delayacct_blkio_start(void);
+extern void __delayacct_blkio_end(void);
+extern int __delayacct_add_tsk(struct taskstats *, struct task_struct *);
+extern __u64 __delayacct_blkio_ticks(struct task_struct *);
+extern void __delayacct_freepages_start(void);
+extern void __delayacct_freepages_end(void);
+
+static inline int delayacct_is_task_waiting_on_io(struct task_struct *p)
+{
+	if (p->delays)
+		return (p->delays->flags & DELAYACCT_PF_BLKIO);
+	else
+		return 0;
+}
+
+static inline void delayacct_set_flag(int flag)
+{
+	if (current->delays)
+		current->delays->flags |= flag;
+}
+
+static inline void delayacct_clear_flag(int flag)
+{
+	if (current->delays)
+		current->delays->flags &= ~flag;
+}
+
+static inline void delayacct_tsk_init(struct task_struct *tsk)
+{
+	/* reinitialize in case parent's non-null pointer was dup'ed*/
+	tsk->delays = NULL;
+	if (delayacct_on)
+		__delayacct_tsk_init(tsk);
+}
+
+/* Free tsk->delays. Called from bad fork and __put_task_struct
+ * where there's no risk of tsk->delays being accessed elsewhere
+ */
+static inline void delayacct_tsk_free(struct task_struct *tsk)
+{
+	if (tsk->delays)
+		kmem_cache_free(delayacct_cache, tsk->delays);
+	tsk->delays = NULL;
+}
+
+static inline void delayacct_blkio_start(void)
+{
+	delayacct_set_flag(DELAYACCT_PF_BLKIO);
+	if (current->delays)
+		__delayacct_blkio_start();
+}
+
+static inline void delayacct_blkio_end(void)
+{
+	if (current->delays)
+		__delayacct_blkio_end();
+	delayacct_clear_flag(DELAYACCT_PF_BLKIO);
+}
+
+static inline int delayacct_add_tsk(struct taskstats *d,
+					struct task_struct *tsk)
+{
+	if (!delayacct_on || !tsk->delays)
+		return 0;
+	return __delayacct_add_tsk(d, tsk);
+}
+
+static inline __u64 delayacct_blkio_ticks(struct task_struct *tsk)
+{
+	if (tsk->delays)
+		return __delayacct_blkio_ticks(tsk);
+	return 0;
+}
+
+static inline void delayacct_freepages_start(void)
+{
+	if (current->delays)
+		__delayacct_freepages_start();
+}
+
+static inline void delayacct_freepages_end(void)
+{
+	if (current->delays)
+		__delayacct_freepages_end();
+}
+
+#else
+static inline void delayacct_set_flag(int flag)
+{}
+static inline void delayacct_clear_flag(int flag)
+{}
+static inline void delayacct_init(void)
+{}
+static inline void delayacct_tsk_init(struct task_struct *tsk)
+{}
+static inline void delayacct_tsk_free(struct task_struct *tsk)
+{}
+static inline void delayacct_blkio_start(void)
+{}
+static inline void delayacct_blkio_end(void)
+{}
+static inline int delayacct_add_tsk(struct taskstats *d,
+					struct task_struct *tsk)
+{ return 0; }
+static inline __u64 delayacct_blkio_ticks(struct task_struct *tsk)
+{ return 0; }
+static inline int delayacct_is_task_waiting_on_io(struct task_struct *p)
+{ return 0; }
+static inline void delayacct_freepages_start(void)
+{}
+static inline void delayacct_freepages_end(void)
+{}
+
+#endif /* CONFIG_TASK_DELAY_ACCT */
+
+#endif
diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h
new file mode 100644
index 00000000..281c72a3
--- /dev/null
+++ b/include/linux/devfreq.h
@@ -0,0 +1,253 @@
+/*
+ * devfreq: Generic Dynamic Voltage and Frequency Scaling (DVFS) Framework
+ *	    for Non-CPU Devices.
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ *	MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_DEVFREQ_H__
+#define __LINUX_DEVFREQ_H__
+
+#include <linux/device.h>
+#include <linux/notifier.h>
+#include <linux/opp.h>
+
+#define DEVFREQ_NAME_LEN 16
+
+struct devfreq;
+
+/**
+ * struct devfreq_dev_status - Data given from devfreq user device to
+ *			     governors. Represents the performance
+ *			     statistics.
+ * @total_time		The total time represented by this instance of
+ *			devfreq_dev_status
+ * @busy_time		The time that the device was working among the
+ *			total_time.
+ * @current_frequency	The operating frequency.
+ * @private_data	An entry not specified by the devfreq framework.
+ *			A device and a specific governor may have their
+ *			own protocol with private_data. However, because
+ *			this is governor-specific, a governor using this
+ *			will be only compatible with devices aware of it.
+ */
+struct devfreq_dev_status {
+	/* both since the last measure */
+	unsigned long total_time;
+	unsigned long busy_time;
+	unsigned long current_frequency;
+	void *private_data;
+};
+
+/*
+ * The resulting frequency should be at most this. (this bound is the
+ * least upper bound; thus, the resulting freq should be lower or same)
+ * If the flag is not set, the resulting frequency should be at most the
+ * bound (greatest lower bound)
+ */
+#define DEVFREQ_FLAG_LEAST_UPPER_BOUND		0x1
+
+/**
+ * struct devfreq_dev_profile - Devfreq's user device profile
+ * @initial_freq	The operating frequency when devfreq_add_device() is
+ *			called.
+ * @polling_ms		The polling interval in ms. 0 disables polling.
+ * @target		The device should set its operating frequency at
+ *			freq or lowest-upper-than-freq value. If freq is
+ *			higher than any operable frequency, set maximum.
+ *			Before returning, target function should set
+ *			freq at the current frequency.
+ *			The "flags" parameter's possible values are
+ *			explained above with "DEVFREQ_FLAG_*" macros.
+ * @get_dev_status	The device should provide the current performance
+ *			status to devfreq, which is used by governors.
+ * @exit		An optional callback that is called when devfreq
+ *			is removing the devfreq object due to error or
+ *			from devfreq_remove_device() call. If the user
+ *			has registered devfreq->nb at a notifier-head,
+ *			this is the time to unregister it.
+ */
+struct devfreq_dev_profile {
+	unsigned long initial_freq;
+	unsigned int polling_ms;
+
+	int (*target)(struct device *dev, unsigned long *freq, u32 flags);
+	int (*get_dev_status)(struct device *dev,
+			      struct devfreq_dev_status *stat);
+	void (*exit)(struct device *dev);
+};
+
+/**
+ * struct devfreq_governor - Devfreq policy governor
+ * @name		Governor's name
+ * @get_target_freq	Returns desired operating frequency for the device.
+ *			Basically, get_target_freq will run
+ *			devfreq_dev_profile.get_dev_status() to get the
+ *			status of the device (load = busy_time / total_time).
+ *			If no_central_polling is set, this callback is called
+ *			only with update_devfreq() notified by OPP.
+ * @init		Called when the devfreq is being attached to a device
+ * @exit		Called when the devfreq is being removed from a
+ *			device. Governor should stop any internal routines
+ *			before return because related data may be
+ *			freed after exit().
+ * @no_central_polling	Do not use devfreq's central polling mechanism.
+ *			When this is set, devfreq will not call
+ *			get_target_freq with devfreq_monitor(). However,
+ *			devfreq will call get_target_freq with
+ *			devfreq_update() notified by OPP framework.
+ *
+ * Note that the callbacks are called with devfreq->lock locked by devfreq.
+ */
+struct devfreq_governor {
+	const char name[DEVFREQ_NAME_LEN];
+	int (*get_target_freq)(struct devfreq *this, unsigned long *freq);
+	int (*init)(struct devfreq *this);
+	void (*exit)(struct devfreq *this);
+	const bool no_central_polling;
+};
+
+/**
+ * struct devfreq - Device devfreq structure
+ * @node	list node - contains the devices with devfreq that have been
+ *		registered.
+ * @lock	a mutex to protect accessing devfreq.
+ * @dev		device registered by devfreq class. dev.parent is the device
+ *		using devfreq.
+ * @profile	device-specific devfreq profile
+ * @governor	method how to choose frequency based on the usage.
+ * @nb		notifier block used to notify devfreq object that it should
+ *		reevaluate operable frequencies. Devfreq users may use
+ *		devfreq.nb to the corresponding register notifier call chain.
+ * @polling_jiffies	interval in jiffies.
+ * @previous_freq	previously configured frequency value.
+ * @next_polling	the number of remaining jiffies to poll with
+ *			"devfreq_monitor" executions to reevaluate
+ *			frequency/voltage of the device. Set by
+ *			profile's polling_ms interval.
+ * @data	Private data of the governor. The devfreq framework does not
+ *		touch this.
+ * @being_removed	a flag to mark that this object is being removed in
+ *			order to prevent trying to remove the object multiple times.
+ * @min_freq	Limit minimum frequency requested by user (0: none)
+ * @max_freq	Limit maximum frequency requested by user (0: none)
+ *
+ * This structure stores the devfreq information for a give device.
+ *
+ * Note that when a governor accesses entries in struct devfreq in its
+ * functions except for the context of callbacks defined in struct
+ * devfreq_governor, the governor should protect its access with the
+ * struct mutex lock in struct devfreq. A governor may use this mutex
+ * to protect its own private data in void *data as well.
+ */
+struct devfreq {
+	struct list_head node;
+
+	struct mutex lock;
+	struct device dev;
+	struct devfreq_dev_profile *profile;
+	const struct devfreq_governor *governor;
+	struct notifier_block nb;
+
+	unsigned long polling_jiffies;
+	unsigned long previous_freq;
+	unsigned int next_polling;
+
+	void *data; /* private data for governors */
+
+	bool being_removed;
+
+	unsigned long min_freq;
+	unsigned long max_freq;
+};
+
+#if defined(CONFIG_PM_DEVFREQ)
+extern struct devfreq *devfreq_add_device(struct device *dev,
+				  struct devfreq_dev_profile *profile,
+				  const struct devfreq_governor *governor,
+				  void *data);
+extern int devfreq_remove_device(struct devfreq *devfreq);
+
+/* Helper functions for devfreq user device driver with OPP. */
+extern struct opp *devfreq_recommended_opp(struct device *dev,
+					   unsigned long *freq, u32 flags);
+extern int devfreq_register_opp_notifier(struct device *dev,
+					 struct devfreq *devfreq);
+extern int devfreq_unregister_opp_notifier(struct device *dev,
+					   struct devfreq *devfreq);
+
+#ifdef CONFIG_DEVFREQ_GOV_POWERSAVE
+extern const struct devfreq_governor devfreq_powersave;
+#endif
+#ifdef CONFIG_DEVFREQ_GOV_PERFORMANCE
+extern const struct devfreq_governor devfreq_performance;
+#endif
+#ifdef CONFIG_DEVFREQ_GOV_USERSPACE
+extern const struct devfreq_governor devfreq_userspace;
+#endif
+#ifdef CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND
+extern const struct devfreq_governor devfreq_simple_ondemand;
+/**
+ * struct devfreq_simple_ondemand_data - void *data fed to struct devfreq
+ *	and devfreq_add_device
+ * @ upthreshold	If the load is over this value, the frequency jumps.
+ *			Specify 0 to use the default. Valid value = 0 to 100.
+ * @ downdifferential	If the load is under upthreshold - downdifferential,
+ *			the governor may consider slowing the frequency down.
+ *			Specify 0 to use the default. Valid value = 0 to 100.
+ *			downdifferential < upthreshold must hold.
+ *
+ * If the fed devfreq_simple_ondemand_data pointer is NULL to the governor,
+ * the governor uses the default values.
+ */
+struct devfreq_simple_ondemand_data {
+	unsigned int upthreshold;
+	unsigned int downdifferential;
+};
+#endif
+
+#else /* !CONFIG_PM_DEVFREQ */
+static struct devfreq *devfreq_add_device(struct device *dev,
+					  struct devfreq_dev_profile *profile,
+					  struct devfreq_governor *governor,
+					  void *data)
+{
+	return NULL;
+}
+
+static int devfreq_remove_device(struct devfreq *devfreq)
+{
+	return 0;
+}
+
+static struct opp *devfreq_recommended_opp(struct device *dev,
+					   unsigned long *freq, u32 flags)
+{
+	return -EINVAL;
+}
+
+static int devfreq_register_opp_notifier(struct device *dev,
+					 struct devfreq *devfreq)
+{
+	return -EINVAL;
+}
+
+static int devfreq_unregister_opp_notifier(struct device *dev,
+					   struct devfreq *devfreq)
+{
+	return -EINVAL;
+}
+
+#define devfreq_powersave	NULL
+#define devfreq_performance	NULL
+#define devfreq_userspace	NULL
+#define devfreq_simple_ondemand	NULL
+
+#endif /* CONFIG_PM_DEVFREQ */
+
+#endif /* __LINUX_DEVFREQ_H__ */
diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
new file mode 100644
index 00000000..98f34b88
--- /dev/null
+++ b/include/linux/device-mapper.h
@@ -0,0 +1,514 @@
+/*
+ * Copyright (C) 2001 Sistina Software (UK) Limited.
+ * Copyright (C) 2004-2008 Red Hat, Inc. All rights reserved.
+ *
+ * This file is released under the LGPL.
+ */
+
+#ifndef _LINUX_DEVICE_MAPPER_H
+#define _LINUX_DEVICE_MAPPER_H
+
+#include <linux/bio.h>
+#include <linux/blkdev.h>
+#include <linux/ratelimit.h>
+
+struct dm_dev;
+struct dm_target;
+struct dm_table;
+struct mapped_device;
+struct bio_vec;
+
+typedef enum { STATUSTYPE_INFO, STATUSTYPE_TABLE } status_type_t;
+
+union map_info {
+	void *ptr;
+	unsigned long long ll;
+	unsigned target_request_nr;
+};
+
+/*
+ * In the constructor the target parameter will already have the
+ * table, type, begin and len fields filled in.
+ */
+typedef int (*dm_ctr_fn) (struct dm_target *target,
+			  unsigned int argc, char **argv);
+
+/*
+ * The destructor doesn't need to free the dm_target, just
+ * anything hidden ti->private.
+ */
+typedef void (*dm_dtr_fn) (struct dm_target *ti);
+
+/*
+ * The map function must return:
+ * < 0: error
+ * = 0: The target will handle the io by resubmitting it later
+ * = 1: simple remap complete
+ * = 2: The target wants to push back the io
+ */
+typedef int (*dm_map_fn) (struct dm_target *ti, struct bio *bio,
+			  union map_info *map_context);
+typedef int (*dm_map_request_fn) (struct dm_target *ti, struct request *clone,
+				  union map_info *map_context);
+
+/*
+ * Returns:
+ * < 0 : error (currently ignored)
+ * 0   : ended successfully
+ * 1   : for some reason the io has still not completed (eg,
+ *       multipath target might want to requeue a failed io).
+ * 2   : The target wants to push back the io
+ */
+typedef int (*dm_endio_fn) (struct dm_target *ti,
+			    struct bio *bio, int error,
+			    union map_info *map_context);
+typedef int (*dm_request_endio_fn) (struct dm_target *ti,
+				    struct request *clone, int error,
+				    union map_info *map_context);
+
+typedef void (*dm_flush_fn) (struct dm_target *ti);
+typedef void (*dm_presuspend_fn) (struct dm_target *ti);
+typedef void (*dm_postsuspend_fn) (struct dm_target *ti);
+typedef int (*dm_preresume_fn) (struct dm_target *ti);
+typedef void (*dm_resume_fn) (struct dm_target *ti);
+
+typedef int (*dm_status_fn) (struct dm_target *ti, status_type_t status_type,
+			     char *result, unsigned int maxlen);
+
+typedef int (*dm_message_fn) (struct dm_target *ti, unsigned argc, char **argv);
+
+typedef int (*dm_ioctl_fn) (struct dm_target *ti, unsigned int cmd,
+			    unsigned long arg);
+
+typedef int (*dm_merge_fn) (struct dm_target *ti, struct bvec_merge_data *bvm,
+			    struct bio_vec *biovec, int max_size);
+
+typedef int (*iterate_devices_callout_fn) (struct dm_target *ti,
+					   struct dm_dev *dev,
+					   sector_t start, sector_t len,
+					   void *data);
+
+typedef int (*dm_iterate_devices_fn) (struct dm_target *ti,
+				      iterate_devices_callout_fn fn,
+				      void *data);
+
+typedef void (*dm_io_hints_fn) (struct dm_target *ti,
+				struct queue_limits *limits);
+
+/*
+ * Returns:
+ *    0: The target can handle the next I/O immediately.
+ *    1: The target can't handle the next I/O immediately.
+ */
+typedef int (*dm_busy_fn) (struct dm_target *ti);
+
+void dm_error(const char *message);
+
+/*
+ * Combine device limits.
+ */
+int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev,
+			 sector_t start, sector_t len, void *data);
+
+struct dm_dev {
+	struct block_device *bdev;
+	fmode_t mode;
+	char name[16];
+};
+
+/*
+ * Constructors should call these functions to ensure destination devices
+ * are opened/closed correctly.
+ */
+int dm_get_device(struct dm_target *ti, const char *path, fmode_t mode,
+						 struct dm_dev **result);
+void dm_put_device(struct dm_target *ti, struct dm_dev *d);
+
+/*
+ * Information about a target type
+ */
+
+struct target_type {
+	uint64_t features;
+	const char *name;
+	struct module *module;
+	unsigned version[3];
+	dm_ctr_fn ctr;
+	dm_dtr_fn dtr;
+	dm_map_fn map;
+	dm_map_request_fn map_rq;
+	dm_endio_fn end_io;
+	dm_request_endio_fn rq_end_io;
+	dm_flush_fn flush;
+	dm_presuspend_fn presuspend;
+	dm_postsuspend_fn postsuspend;
+	dm_preresume_fn preresume;
+	dm_resume_fn resume;
+	dm_status_fn status;
+	dm_message_fn message;
+	dm_ioctl_fn ioctl;
+	dm_merge_fn merge;
+	dm_busy_fn busy;
+	dm_iterate_devices_fn iterate_devices;
+	dm_io_hints_fn io_hints;
+
+	/* For internal device-mapper use. */
+	struct list_head list;
+};
+
+/*
+ * Target features
+ */
+
+/*
+ * Any table that contains an instance of this target must have only one.
+ */
+#define DM_TARGET_SINGLETON		0x00000001
+#define dm_target_needs_singleton(type)	((type)->features & DM_TARGET_SINGLETON)
+
+/*
+ * Indicates that a target does not support read-only devices.
+ */
+#define DM_TARGET_ALWAYS_WRITEABLE	0x00000002
+#define dm_target_always_writeable(type) \
+		((type)->features & DM_TARGET_ALWAYS_WRITEABLE)
+
+/*
+ * Any device that contains a table with an instance of this target may never
+ * have tables containing any different target type.
+ */
+#define DM_TARGET_IMMUTABLE		0x00000004
+#define dm_target_is_immutable(type)	((type)->features & DM_TARGET_IMMUTABLE)
+
+struct dm_target {
+	struct dm_table *table;
+	struct target_type *type;
+
+	/* target limits */
+	sector_t begin;
+	sector_t len;
+
+	/* Always a power of 2 */
+	sector_t split_io;
+
+	/*
+	 * A number of zero-length barrier requests that will be submitted
+	 * to the target for the purpose of flushing cache.
+	 *
+	 * The request number will be placed in union map_info->target_request_nr.
+	 * It is a responsibility of the target driver to remap these requests
+	 * to the real underlying devices.
+	 */
+	unsigned num_flush_requests;
+
+	/*
+	 * The number of discard requests that will be submitted to the
+	 * target.  map_info->request_nr is used just like num_flush_requests.
+	 */
+	unsigned num_discard_requests;
+
+	/* target specific data */
+	void *private;
+
+	/* Used to provide an error string from the ctr */
+	char *error;
+
+	/*
+	 * Set if this target needs to receive discards regardless of
+	 * whether or not its underlying devices have support.
+	 */
+	unsigned discards_supported:1;
+
+	/*
+	 * Set if this target does not return zeroes on discarded blocks.
+	 */
+	unsigned discard_zeroes_data_unsupported:1;
+};
+
+/* Each target can link one of these into the table */
+struct dm_target_callbacks {
+	struct list_head list;
+	int (*congested_fn) (struct dm_target_callbacks *, int);
+};
+
+int dm_register_target(struct target_type *t);
+void dm_unregister_target(struct target_type *t);
+
+/*
+ * Target argument parsing.
+ */
+struct dm_arg_set {
+	unsigned argc;
+	char **argv;
+};
+
+/*
+ * The minimum and maximum value of a numeric argument, together with
+ * the error message to use if the number is found to be outside that range.
+ */
+struct dm_arg {
+	unsigned min;
+	unsigned max;
+	char *error;
+};
+
+/*
+ * Validate the next argument, either returning it as *value or, if invalid,
+ * returning -EINVAL and setting *error.
+ */
+int dm_read_arg(struct dm_arg *arg, struct dm_arg_set *arg_set,
+		unsigned *value, char **error);
+
+/*
+ * Process the next argument as the start of a group containing between
+ * arg->min and arg->max further arguments. Either return the size as
+ * *num_args or, if invalid, return -EINVAL and set *error.
+ */
+int dm_read_arg_group(struct dm_arg *arg, struct dm_arg_set *arg_set,
+		      unsigned *num_args, char **error);
+
+/*
+ * Return the current argument and shift to the next.
+ */
+const char *dm_shift_arg(struct dm_arg_set *as);
+
+/*
+ * Move through num_args arguments.
+ */
+void dm_consume_args(struct dm_arg_set *as, unsigned num_args);
+
+/*-----------------------------------------------------------------
+ * Functions for creating and manipulating mapped devices.
+ * Drop the reference with dm_put when you finish with the object.
+ *---------------------------------------------------------------*/
+
+/*
+ * DM_ANY_MINOR chooses the next available minor number.
+ */
+#define DM_ANY_MINOR (-1)
+int dm_create(int minor, struct mapped_device **md);
+
+/*
+ * Reference counting for md.
+ */
+struct mapped_device *dm_get_md(dev_t dev);
+void dm_get(struct mapped_device *md);
+void dm_put(struct mapped_device *md);
+
+/*
+ * An arbitrary pointer may be stored alongside a mapped device.
+ */
+void dm_set_mdptr(struct mapped_device *md, void *ptr);
+void *dm_get_mdptr(struct mapped_device *md);
+
+/*
+ * A device can still be used while suspended, but I/O is deferred.
+ */
+int dm_suspend(struct mapped_device *md, unsigned suspend_flags);
+int dm_resume(struct mapped_device *md);
+
+/*
+ * Event functions.
+ */
+uint32_t dm_get_event_nr(struct mapped_device *md);
+int dm_wait_event(struct mapped_device *md, int event_nr);
+uint32_t dm_next_uevent_seq(struct mapped_device *md);
+void dm_uevent_add(struct mapped_device *md, struct list_head *elist);
+
+/*
+ * Info functions.
+ */
+const char *dm_device_name(struct mapped_device *md);
+int dm_copy_name_and_uuid(struct mapped_device *md, char *name, char *uuid);
+struct gendisk *dm_disk(struct mapped_device *md);
+int dm_suspended(struct dm_target *ti);
+int dm_noflush_suspending(struct dm_target *ti);
+union map_info *dm_get_mapinfo(struct bio *bio);
+union map_info *dm_get_rq_mapinfo(struct request *rq);
+
+/*
+ * Geometry functions.
+ */
+int dm_get_geometry(struct mapped_device *md, struct hd_geometry *geo);
+int dm_set_geometry(struct mapped_device *md, struct hd_geometry *geo);
+
+
+/*-----------------------------------------------------------------
+ * Functions for manipulating device-mapper tables.
+ *---------------------------------------------------------------*/
+
+/*
+ * First create an empty table.
+ */
+int dm_table_create(struct dm_table **result, fmode_t mode,
+		    unsigned num_targets, struct mapped_device *md);
+
+/*
+ * Then call this once for each target.
+ */
+int dm_table_add_target(struct dm_table *t, const char *type,
+			sector_t start, sector_t len, char *params);
+
+/*
+ * Target_ctr should call this if it needs to add any callbacks.
+ */
+void dm_table_add_target_callbacks(struct dm_table *t, struct dm_target_callbacks *cb);
+
+/*
+ * Finally call this to make the table ready for use.
+ */
+int dm_table_complete(struct dm_table *t);
+
+/*
+ * Table reference counting.
+ */
+struct dm_table *dm_get_live_table(struct mapped_device *md);
+void dm_table_get(struct dm_table *t);
+void dm_table_put(struct dm_table *t);
+
+/*
+ * Queries
+ */
+sector_t dm_table_get_size(struct dm_table *t);
+unsigned int dm_table_get_num_targets(struct dm_table *t);
+fmode_t dm_table_get_mode(struct dm_table *t);
+struct mapped_device *dm_table_get_md(struct dm_table *t);
+
+/*
+ * Trigger an event.
+ */
+void dm_table_event(struct dm_table *t);
+
+/*
+ * The device must be suspended before calling this method.
+ * Returns the previous table, which the caller must destroy.
+ */
+struct dm_table *dm_swap_table(struct mapped_device *md,
+			       struct dm_table *t);
+
+/*
+ * A wrapper around vmalloc.
+ */
+void *dm_vcalloc(unsigned long nmemb, unsigned long elem_size);
+
+/*-----------------------------------------------------------------
+ * Macros.
+ *---------------------------------------------------------------*/
+#define DM_NAME "device-mapper"
+
+#ifdef CONFIG_PRINTK
+extern struct ratelimit_state dm_ratelimit_state;
+
+#define dm_ratelimit()	__ratelimit(&dm_ratelimit_state)
+#else
+#define dm_ratelimit()	0
+#endif
+
+#define DMCRIT(f, arg...) \
+	printk(KERN_CRIT DM_NAME ": " DM_MSG_PREFIX ": " f "\n", ## arg)
+
+#define DMERR(f, arg...) \
+	printk(KERN_ERR DM_NAME ": " DM_MSG_PREFIX ": " f "\n", ## arg)
+#define DMERR_LIMIT(f, arg...) \
+	do { \
+		if (dm_ratelimit())	\
+			printk(KERN_ERR DM_NAME ": " DM_MSG_PREFIX ": " \
+			       f "\n", ## arg); \
+	} while (0)
+
+#define DMWARN(f, arg...) \
+	printk(KERN_WARNING DM_NAME ": " DM_MSG_PREFIX ": " f "\n", ## arg)
+#define DMWARN_LIMIT(f, arg...) \
+	do { \
+		if (dm_ratelimit())	\
+			printk(KERN_WARNING DM_NAME ": " DM_MSG_PREFIX ": " \
+			       f "\n", ## arg); \
+	} while (0)
+
+#define DMINFO(f, arg...) \
+	printk(KERN_INFO DM_NAME ": " DM_MSG_PREFIX ": " f "\n", ## arg)
+#define DMINFO_LIMIT(f, arg...) \
+	do { \
+		if (dm_ratelimit())	\
+			printk(KERN_INFO DM_NAME ": " DM_MSG_PREFIX ": " f \
+			       "\n", ## arg); \
+	} while (0)
+
+#ifdef CONFIG_DM_DEBUG
+#  define DMDEBUG(f, arg...) \
+	printk(KERN_DEBUG DM_NAME ": " DM_MSG_PREFIX " DEBUG: " f "\n", ## arg)
+#  define DMDEBUG_LIMIT(f, arg...) \
+	do { \
+		if (dm_ratelimit())	\
+			printk(KERN_DEBUG DM_NAME ": " DM_MSG_PREFIX ": " f \
+			       "\n", ## arg); \
+	} while (0)
+#else
+#  define DMDEBUG(f, arg...) do {} while (0)
+#  define DMDEBUG_LIMIT(f, arg...) do {} while (0)
+#endif
+
+#define DMEMIT(x...) sz += ((sz >= maxlen) ? \
+			  0 : scnprintf(result + sz, maxlen - sz, x))
+
+#define SECTOR_SHIFT 9
+
+/*
+ * Definitions of return values from target end_io function.
+ */
+#define DM_ENDIO_INCOMPLETE	1
+#define DM_ENDIO_REQUEUE	2
+
+/*
+ * Definitions of return values from target map function.
+ */
+#define DM_MAPIO_SUBMITTED	0
+#define DM_MAPIO_REMAPPED	1
+#define DM_MAPIO_REQUEUE	DM_ENDIO_REQUEUE
+
+/*
+ * Ceiling(n / sz)
+ */
+#define dm_div_up(n, sz) (((n) + (sz) - 1) / (sz))
+
+#define dm_sector_div_up(n, sz) ( \
+{ \
+	sector_t _r = ((n) + (sz) - 1); \
+	sector_div(_r, (sz)); \
+	_r; \
+} \
+)
+
+/*
+ * ceiling(n / size) * size
+ */
+#define dm_round_up(n, sz) (dm_div_up((n), (sz)) * (sz))
+
+#define dm_array_too_big(fixed, obj, num) \
+	((num) > (UINT_MAX - (fixed)) / (obj))
+
+/*
+ * Sector offset taken relative to the start of the target instead of
+ * relative to the start of the device.
+ */
+#define dm_target_offset(ti, sector) ((sector) - (ti)->begin)
+
+static inline sector_t to_sector(unsigned long n)
+{
+	return (n >> SECTOR_SHIFT);
+}
+
+static inline unsigned long to_bytes(sector_t n)
+{
+	return (n << SECTOR_SHIFT);
+}
+
+/*-----------------------------------------------------------------
+ * Helper for block layer and dm core operations
+ *---------------------------------------------------------------*/
+void dm_dispatch_request(struct request *rq);
+void dm_requeue_unmapped_request(struct request *rq);
+void dm_kill_unmapped_request(struct request *rq, int error);
+int dm_underlying_device_busy(struct request_queue *q);
+
+#endif	/* _LINUX_DEVICE_MAPPER_H */
diff --git a/include/linux/device.h b/include/linux/device.h
new file mode 100644
index 00000000..5ad17ccc
--- /dev/null
+++ b/include/linux/device.h
@@ -0,0 +1,1021 @@
+/*
+ * device.h - generic, centralized driver model
+ *
+ * Copyright (c) 2001-2003 Patrick Mochel <mochel@osdl.org>
+ * Copyright (c) 2004-2009 Greg Kroah-Hartman <gregkh@suse.de>
+ * Copyright (c) 2008-2009 Novell Inc.
+ *
+ * This file is released under the GPLv2
+ *
+ * See Documentation/driver-model/ for more information.
+ */
+
+#ifndef _DEVICE_H_
+#define _DEVICE_H_
+
+#include <linux/ioport.h>
+#include <linux/kobject.h>
+#include <linux/klist.h>
+#include <linux/list.h>
+#include <linux/lockdep.h>
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/pm.h>
+#include <linux/atomic.h>
+#include <asm/device.h>
+
+struct device;
+struct device_private;
+struct device_driver;
+struct driver_private;
+struct module;
+struct class;
+struct subsys_private;
+struct bus_type;
+struct device_node;
+struct iommu_ops;
+
+struct bus_attribute {
+	struct attribute	attr;
+	ssize_t (*show)(struct bus_type *bus, char *buf);
+	ssize_t (*store)(struct bus_type *bus, const char *buf, size_t count);
+};
+
+#define BUS_ATTR(_name, _mode, _show, _store)	\
+struct bus_attribute bus_attr_##_name = __ATTR(_name, _mode, _show, _store)
+
+extern int __must_check bus_create_file(struct bus_type *,
+					struct bus_attribute *);
+extern void bus_remove_file(struct bus_type *, struct bus_attribute *);
+
+/**
+ * struct bus_type - The bus type of the device
+ *
+ * @name:	The name of the bus.
+ * @dev_name:	Used for subsystems to enumerate devices like ("foo%u", dev->id).
+ * @dev_root:	Default device to use as the parent.
+ * @bus_attrs:	Default attributes of the bus.
+ * @dev_attrs:	Default attributes of the devices on the bus.
+ * @drv_attrs:	Default attributes of the device drivers on the bus.
+ * @match:	Called, perhaps multiple times, whenever a new device or driver
+ *		is added for this bus. It should return a nonzero value if the
+ *		given device can be handled by the given driver.
+ * @uevent:	Called when a device is added, removed, or a few other things
+ *		that generate uevents to add the environment variables.
+ * @probe:	Called when a new device or driver add to this bus, and callback
+ *		the specific driver's probe to initial the matched device.
+ * @remove:	Called when a device removed from this bus.
+ * @shutdown:	Called at shut-down time to quiesce the device.
+ * @suspend:	Called when a device on this bus wants to go to sleep mode.
+ * @resume:	Called to bring a device on this bus out of sleep mode.
+ * @pm:		Power management operations of this bus, callback the specific
+ *		device driver's pm-ops.
+ * @iommu_ops:  IOMMU specific operations for this bus, used to attach IOMMU
+ *              driver implementations to a bus and allow the driver to do
+ *              bus-specific setup
+ * @p:		The private data of the driver core, only the driver core can
+ *		touch this.
+ *
+ * A bus is a channel between the processor and one or more devices. For the
+ * purposes of the device model, all devices are connected via a bus, even if
+ * it is an internal, virtual, "platform" bus. Buses can plug into each other.
+ * A USB controller is usually a PCI device, for example. The device model
+ * represents the actual connections between buses and the devices they control.
+ * A bus is represented by the bus_type structure. It contains the name, the
+ * default attributes, the bus' methods, PM operations, and the driver core's
+ * private data.
+ */
+struct bus_type {
+	const char		*name;
+	const char		*dev_name;
+	struct device		*dev_root;
+	struct bus_attribute	*bus_attrs;
+	struct device_attribute	*dev_attrs;
+	struct driver_attribute	*drv_attrs;
+
+	int (*match)(struct device *dev, struct device_driver *drv);
+	int (*uevent)(struct device *dev, struct kobj_uevent_env *env);
+	int (*probe)(struct device *dev);
+	int (*remove)(struct device *dev);
+	void (*shutdown)(struct device *dev);
+
+	int (*suspend)(struct device *dev, pm_message_t state);
+	int (*resume)(struct device *dev);
+
+	const struct dev_pm_ops *pm;
+
+	struct iommu_ops *iommu_ops;
+
+	struct subsys_private *p;
+};
+
+/* This is a #define to keep the compiler from merging different
+ * instances of the __key variable */
+#define bus_register(subsys)			\
+({						\
+	static struct lock_class_key __key;	\
+	__bus_register(subsys, &__key);	\
+})
+extern int __must_check __bus_register(struct bus_type *bus,
+				       struct lock_class_key *key);
+extern void bus_unregister(struct bus_type *bus);
+
+extern int __must_check bus_rescan_devices(struct bus_type *bus);
+
+/* iterator helpers for buses */
+struct subsys_dev_iter {
+	struct klist_iter		ki;
+	const struct device_type	*type;
+};
+void subsys_dev_iter_init(struct subsys_dev_iter *iter,
+			 struct bus_type *subsys,
+			 struct device *start,
+			 const struct device_type *type);
+struct device *subsys_dev_iter_next(struct subsys_dev_iter *iter);
+void subsys_dev_iter_exit(struct subsys_dev_iter *iter);
+
+int bus_for_each_dev(struct bus_type *bus, struct device *start, void *data,
+		     int (*fn)(struct device *dev, void *data));
+struct device *bus_find_device(struct bus_type *bus, struct device *start,
+			       void *data,
+			       int (*match)(struct device *dev, void *data));
+struct device *bus_find_device_by_name(struct bus_type *bus,
+				       struct device *start,
+				       const char *name);
+struct device *subsys_find_device_by_id(struct bus_type *bus, unsigned int id,
+					struct device *hint);
+int bus_for_each_drv(struct bus_type *bus, struct device_driver *start,
+		     void *data, int (*fn)(struct device_driver *, void *));
+void bus_sort_breadthfirst(struct bus_type *bus,
+			   int (*compare)(const struct device *a,
+					  const struct device *b));
+/*
+ * Bus notifiers: Get notified of addition/removal of devices
+ * and binding/unbinding of drivers to devices.
+ * In the long run, it should be a replacement for the platform
+ * notify hooks.
+ */
+struct notifier_block;
+
+extern int bus_register_notifier(struct bus_type *bus,
+				 struct notifier_block *nb);
+extern int bus_unregister_notifier(struct bus_type *bus,
+				   struct notifier_block *nb);
+
+/* All 4 notifers below get called with the target struct device *
+ * as an argument. Note that those functions are likely to be called
+ * with the device lock held in the core, so be careful.
+ */
+#define BUS_NOTIFY_ADD_DEVICE		0x00000001 /* device added */
+#define BUS_NOTIFY_DEL_DEVICE		0x00000002 /* device removed */
+#define BUS_NOTIFY_BIND_DRIVER		0x00000003 /* driver about to be
+						      bound */
+#define BUS_NOTIFY_BOUND_DRIVER		0x00000004 /* driver bound to device */
+#define BUS_NOTIFY_UNBIND_DRIVER	0x00000005 /* driver about to be
+						      unbound */
+#define BUS_NOTIFY_UNBOUND_DRIVER	0x00000006 /* driver is unbound
+						      from the device */
+
+extern struct kset *bus_get_kset(struct bus_type *bus);
+extern struct klist *bus_get_device_klist(struct bus_type *bus);
+
+/**
+ * struct device_driver - The basic device driver structure
+ * @name:	Name of the device driver.
+ * @bus:	The bus which the device of this driver belongs to.
+ * @owner:	The module owner.
+ * @mod_name:	Used for built-in modules.
+ * @suppress_bind_attrs: Disables bind/unbind via sysfs.
+ * @of_match_table: The open firmware table.
+ * @probe:	Called to query the existence of a specific device,
+ *		whether this driver can work with it, and bind the driver
+ *		to a specific device.
+ * @remove:	Called when the device is removed from the system to
+ *		unbind a device from this driver.
+ * @shutdown:	Called at shut-down time to quiesce the device.
+ * @suspend:	Called to put the device to sleep mode. Usually to a
+ *		low power state.
+ * @resume:	Called to bring a device from sleep mode.
+ * @groups:	Default attributes that get created by the driver core
+ *		automatically.
+ * @pm:		Power management operations of the device which matched
+ *		this driver.
+ * @p:		Driver core's private data, no one other than the driver
+ *		core can touch this.
+ *
+ * The device driver-model tracks all of the drivers known to the system.
+ * The main reason for this tracking is to enable the driver core to match
+ * up drivers with new devices. Once drivers are known objects within the
+ * system, however, a number of other things become possible. Device drivers
+ * can export information and configuration variables that are independent
+ * of any specific device.
+ */
+struct device_driver {
+	const char		*name;
+	struct bus_type		*bus;
+
+	struct module		*owner;
+	const char		*mod_name;	/* used for built-in modules */
+
+	bool suppress_bind_attrs;	/* disables bind/unbind via sysfs */
+
+	const struct of_device_id	*of_match_table;
+
+	int (*probe) (struct device *dev);
+	int (*remove) (struct device *dev);
+	void (*shutdown) (struct device *dev);
+	int (*suspend) (struct device *dev, pm_message_t state);
+	int (*resume) (struct device *dev);
+	const struct attribute_group **groups;
+
+	const struct dev_pm_ops *pm;
+
+	struct driver_private *p;
+};
+
+
+extern int __must_check driver_register(struct device_driver *drv);
+extern void driver_unregister(struct device_driver *drv);
+
+extern struct device_driver *driver_find(const char *name,
+					 struct bus_type *bus);
+extern int driver_probe_done(void);
+extern void wait_for_device_probe(void);
+
+
+/* sysfs interface for exporting driver attributes */
+
+struct driver_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct device_driver *driver, char *buf);
+	ssize_t (*store)(struct device_driver *driver, const char *buf,
+			 size_t count);
+};
+
+#define DRIVER_ATTR(_name, _mode, _show, _store)	\
+struct driver_attribute driver_attr_##_name =		\
+	__ATTR(_name, _mode, _show, _store)
+
+extern int __must_check driver_create_file(struct device_driver *driver,
+					const struct driver_attribute *attr);
+extern void driver_remove_file(struct device_driver *driver,
+			       const struct driver_attribute *attr);
+
+extern int __must_check driver_for_each_device(struct device_driver *drv,
+					       struct device *start,
+					       void *data,
+					       int (*fn)(struct device *dev,
+							 void *));
+struct device *driver_find_device(struct device_driver *drv,
+				  struct device *start, void *data,
+				  int (*match)(struct device *dev, void *data));
+
+/**
+ * struct subsys_interface - interfaces to device functions
+ * @name:       name of the device function
+ * @subsys:     subsytem of the devices to attach to
+ * @node:       the list of functions registered at the subsystem
+ * @add_dev:    device hookup to device function handler
+ * @remove_dev: device hookup to device function handler
+ *
+ * Simple interfaces attached to a subsystem. Multiple interfaces can
+ * attach to a subsystem and its devices. Unlike drivers, they do not
+ * exclusively claim or control devices. Interfaces usually represent
+ * a specific functionality of a subsystem/class of devices.
+ */
+struct subsys_interface {
+	const char *name;
+	struct bus_type *subsys;
+	struct list_head node;
+	int (*add_dev)(struct device *dev, struct subsys_interface *sif);
+	int (*remove_dev)(struct device *dev, struct subsys_interface *sif);
+};
+
+int subsys_interface_register(struct subsys_interface *sif);
+void subsys_interface_unregister(struct subsys_interface *sif);
+
+int subsys_system_register(struct bus_type *subsys,
+			   const struct attribute_group **groups);
+
+/**
+ * struct class - device classes
+ * @name:	Name of the class.
+ * @owner:	The module owner.
+ * @class_attrs: Default attributes of this class.
+ * @dev_attrs:	Default attributes of the devices belong to the class.
+ * @dev_bin_attrs: Default binary attributes of the devices belong to the class.
+ * @dev_kobj:	The kobject that represents this class and links it into the hierarchy.
+ * @dev_uevent:	Called when a device is added, removed from this class, or a
+ *		few other things that generate uevents to add the environment
+ *		variables.
+ * @devnode:	Callback to provide the devtmpfs.
+ * @class_release: Called to release this class.
+ * @dev_release: Called to release the device.
+ * @suspend:	Used to put the device to sleep mode, usually to a low power
+ *		state.
+ * @resume:	Used to bring the device from the sleep mode.
+ * @ns_type:	Callbacks so sysfs can detemine namespaces.
+ * @namespace:	Namespace of the device belongs to this class.
+ * @pm:		The default device power management operations of this class.
+ * @p:		The private data of the driver core, no one other than the
+ *		driver core can touch this.
+ *
+ * A class is a higher-level view of a device that abstracts out low-level
+ * implementation details. Drivers may see a SCSI disk or an ATA disk, but,
+ * at the class level, they are all simply disks. Classes allow user space
+ * to work with devices based on what they do, rather than how they are
+ * connected or how they work.
+ */
+struct class {
+	const char		*name;
+	struct module		*owner;
+
+	struct class_attribute		*class_attrs;
+	struct device_attribute		*dev_attrs;
+	struct bin_attribute		*dev_bin_attrs;
+	struct kobject			*dev_kobj;
+
+	int (*dev_uevent)(struct device *dev, struct kobj_uevent_env *env);
+	char *(*devnode)(struct device *dev, umode_t *mode);
+
+	void (*class_release)(struct class *class);
+	void (*dev_release)(struct device *dev);
+
+	int (*suspend)(struct device *dev, pm_message_t state);
+	int (*resume)(struct device *dev);
+
+	const struct kobj_ns_type_operations *ns_type;
+	const void *(*namespace)(struct device *dev);
+
+	const struct dev_pm_ops *pm;
+
+	struct subsys_private *p;
+};
+
+struct class_dev_iter {
+	struct klist_iter		ki;
+	const struct device_type	*type;
+};
+
+extern struct kobject *sysfs_dev_block_kobj;
+extern struct kobject *sysfs_dev_char_kobj;
+extern int __must_check __class_register(struct class *class,
+					 struct lock_class_key *key);
+extern void class_unregister(struct class *class);
+
+/* This is a #define to keep the compiler from merging different
+ * instances of the __key variable */
+#define class_register(class)			\
+({						\
+	static struct lock_class_key __key;	\
+	__class_register(class, &__key);	\
+})
+
+struct class_compat;
+struct class_compat *class_compat_register(const char *name);
+void class_compat_unregister(struct class_compat *cls);
+int class_compat_create_link(struct class_compat *cls, struct device *dev,
+			     struct device *device_link);
+void class_compat_remove_link(struct class_compat *cls, struct device *dev,
+			      struct device *device_link);
+
+extern void class_dev_iter_init(struct class_dev_iter *iter,
+				struct class *class,
+				struct device *start,
+				const struct device_type *type);
+extern struct device *class_dev_iter_next(struct class_dev_iter *iter);
+extern void class_dev_iter_exit(struct class_dev_iter *iter);
+
+extern int class_for_each_device(struct class *class, struct device *start,
+				 void *data,
+				 int (*fn)(struct device *dev, void *data));
+extern struct device *class_find_device(struct class *class,
+					struct device *start, void *data,
+					int (*match)(struct device *, void *));
+
+struct class_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct class *class, struct class_attribute *attr,
+			char *buf);
+	ssize_t (*store)(struct class *class, struct class_attribute *attr,
+			const char *buf, size_t count);
+	const void *(*namespace)(struct class *class,
+				 const struct class_attribute *attr);
+};
+
+#define CLASS_ATTR(_name, _mode, _show, _store)			\
+struct class_attribute class_attr_##_name = __ATTR(_name, _mode, _show, _store)
+
+extern int __must_check class_create_file(struct class *class,
+					  const struct class_attribute *attr);
+extern void class_remove_file(struct class *class,
+			      const struct class_attribute *attr);
+
+/* Simple class attribute that is just a static string */
+
+struct class_attribute_string {
+	struct class_attribute attr;
+	char *str;
+};
+
+/* Currently read-only only */
+#define _CLASS_ATTR_STRING(_name, _mode, _str) \
+	{ __ATTR(_name, _mode, show_class_attr_string, NULL), _str }
+#define CLASS_ATTR_STRING(_name, _mode, _str) \
+	struct class_attribute_string class_attr_##_name = \
+		_CLASS_ATTR_STRING(_name, _mode, _str)
+
+extern ssize_t show_class_attr_string(struct class *class, struct class_attribute *attr,
+                        char *buf);
+
+struct class_interface {
+	struct list_head	node;
+	struct class		*class;
+
+	int (*add_dev)		(struct device *, struct class_interface *);
+	void (*remove_dev)	(struct device *, struct class_interface *);
+};
+
+extern int __must_check class_interface_register(struct class_interface *);
+extern void class_interface_unregister(struct class_interface *);
+
+extern struct class * __must_check __class_create(struct module *owner,
+						  const char *name,
+						  struct lock_class_key *key);
+extern void class_destroy(struct class *cls);
+
+/* This is a #define to keep the compiler from merging different
+ * instances of the __key variable */
+#define class_create(owner, name)		\
+({						\
+	static struct lock_class_key __key;	\
+	__class_create(owner, name, &__key);	\
+})
+
+/*
+ * The type of device, "struct device" is embedded in. A class
+ * or bus can contain devices of different types
+ * like "partitions" and "disks", "mouse" and "event".
+ * This identifies the device type and carries type-specific
+ * information, equivalent to the kobj_type of a kobject.
+ * If "name" is specified, the uevent will contain it in
+ * the DEVTYPE variable.
+ */
+struct device_type {
+	const char *name;
+	const struct attribute_group **groups;
+	int (*uevent)(struct device *dev, struct kobj_uevent_env *env);
+	char *(*devnode)(struct device *dev, umode_t *mode);
+	void (*release)(struct device *dev);
+
+	const struct dev_pm_ops *pm;
+};
+
+/* interface for exporting device attributes */
+struct device_attribute {
+	struct attribute	attr;
+	ssize_t (*show)(struct device *dev, struct device_attribute *attr,
+			char *buf);
+	ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count);
+};
+
+struct dev_ext_attribute {
+	struct device_attribute attr;
+	void *var;
+};
+
+ssize_t device_show_ulong(struct device *dev, struct device_attribute *attr,
+			  char *buf);
+ssize_t device_store_ulong(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count);
+ssize_t device_show_int(struct device *dev, struct device_attribute *attr,
+			char *buf);
+ssize_t device_store_int(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count);
+
+#define DEVICE_ATTR(_name, _mode, _show, _store) \
+	struct device_attribute dev_attr_##_name = __ATTR(_name, _mode, _show, _store)
+#define DEVICE_ULONG_ATTR(_name, _mode, _var) \
+	struct dev_ext_attribute dev_attr_##_name = \
+		{ __ATTR(_name, _mode, device_show_ulong, device_store_ulong), &(_var) }
+#define DEVICE_INT_ATTR(_name, _mode, _var) \
+	struct dev_ext_attribute dev_attr_##_name = \
+		{ __ATTR(_name, _mode, device_show_ulong, device_store_ulong), &(_var) }
+
+extern int device_create_file(struct device *device,
+			      const struct device_attribute *entry);
+extern void device_remove_file(struct device *dev,
+			       const struct device_attribute *attr);
+extern int __must_check device_create_bin_file(struct device *dev,
+					const struct bin_attribute *attr);
+extern void device_remove_bin_file(struct device *dev,
+				   const struct bin_attribute *attr);
+extern int device_schedule_callback_owner(struct device *dev,
+		void (*func)(struct device *dev), struct module *owner);
+
+/* This is a macro to avoid include problems with THIS_MODULE */
+#define device_schedule_callback(dev, func)			\
+	device_schedule_callback_owner(dev, func, THIS_MODULE)
+
+/* device resource management */
+typedef void (*dr_release_t)(struct device *dev, void *res);
+typedef int (*dr_match_t)(struct device *dev, void *res, void *match_data);
+
+#ifdef CONFIG_DEBUG_DEVRES
+extern void *__devres_alloc(dr_release_t release, size_t size, gfp_t gfp,
+			     const char *name);
+#define devres_alloc(release, size, gfp) \
+	__devres_alloc(release, size, gfp, #release)
+#else
+extern void *devres_alloc(dr_release_t release, size_t size, gfp_t gfp);
+#endif
+extern void devres_free(void *res);
+extern void devres_add(struct device *dev, void *res);
+extern void *devres_find(struct device *dev, dr_release_t release,
+			 dr_match_t match, void *match_data);
+extern void *devres_get(struct device *dev, void *new_res,
+			dr_match_t match, void *match_data);
+extern void *devres_remove(struct device *dev, dr_release_t release,
+			   dr_match_t match, void *match_data);
+extern int devres_destroy(struct device *dev, dr_release_t release,
+			  dr_match_t match, void *match_data);
+
+/* devres group */
+extern void * __must_check devres_open_group(struct device *dev, void *id,
+					     gfp_t gfp);
+extern void devres_close_group(struct device *dev, void *id);
+extern void devres_remove_group(struct device *dev, void *id);
+extern int devres_release_group(struct device *dev, void *id);
+
+/* managed kzalloc/kfree for device drivers, no kmalloc, always use kzalloc */
+extern void *devm_kzalloc(struct device *dev, size_t size, gfp_t gfp);
+extern void devm_kfree(struct device *dev, void *p);
+
+void __iomem *devm_request_and_ioremap(struct device *dev,
+			struct resource *res);
+
+struct device_dma_parameters {
+	/*
+	 * a low level driver may set these to teach IOMMU code about
+	 * sg limitations.
+	 */
+	unsigned int max_segment_size;
+	unsigned long segment_boundary_mask;
+};
+
+/**
+ * struct device - The basic device structure
+ * @parent:	The device's "parent" device, the device to which it is attached.
+ * 		In most cases, a parent device is some sort of bus or host
+ * 		controller. If parent is NULL, the device, is a top-level device,
+ * 		which is not usually what you want.
+ * @p:		Holds the private data of the driver core portions of the device.
+ * 		See the comment of the struct device_private for detail.
+ * @kobj:	A top-level, abstract class from which other classes are derived.
+ * @init_name:	Initial name of the device.
+ * @type:	The type of device.
+ * 		This identifies the device type and carries type-specific
+ * 		information.
+ * @mutex:	Mutex to synchronize calls to its driver.
+ * @bus:	Type of bus device is on.
+ * @driver:	Which driver has allocated this
+ * @platform_data: Platform data specific to the device.
+ * 		Example: For devices on custom boards, as typical of embedded
+ * 		and SOC based hardware, Linux often uses platform_data to point
+ * 		to board-specific structures describing devices and how they
+ * 		are wired.  That can include what ports are available, chip
+ * 		variants, which GPIO pins act in what additional roles, and so
+ * 		on.  This shrinks the "Board Support Packages" (BSPs) and
+ * 		minimizes board-specific #ifdefs in drivers.
+ * @power:	For device power management.
+ * 		See Documentation/power/devices.txt for details.
+ * @pm_domain:	Provide callbacks that are executed during system suspend,
+ * 		hibernation, system resume and during runtime PM transitions
+ * 		along with subsystem-level and driver-level callbacks.
+ * @numa_node:	NUMA node this device is close to.
+ * @dma_mask:	Dma mask (if dma'ble device).
+ * @coherent_dma_mask: Like dma_mask, but for alloc_coherent mapping as not all
+ * 		hardware supports 64-bit addresses for consistent allocations
+ * 		such descriptors.
+ * @dma_parms:	A low level driver may set these to teach IOMMU code about
+ * 		segment limitations.
+ * @dma_pools:	Dma pools (if dma'ble device).
+ * @dma_mem:	Internal for coherent mem override.
+ * @archdata:	For arch-specific additions.
+ * @of_node:	Associated device tree node.
+ * @devt:	For creating the sysfs "dev".
+ * @id:		device instance
+ * @devres_lock: Spinlock to protect the resource of the device.
+ * @devres_head: The resources list of the device.
+ * @knode_class: The node used to add the device to the class list.
+ * @class:	The class of the device.
+ * @groups:	Optional attribute groups.
+ * @release:	Callback to free the device after all references have
+ * 		gone away. This should be set by the allocator of the
+ * 		device (i.e. the bus driver that discovered the device).
+ *
+ * At the lowest level, every device in a Linux system is represented by an
+ * instance of struct device. The device structure contains the information
+ * that the device model core needs to model the system. Most subsystems,
+ * however, track additional information about the devices they host. As a
+ * result, it is rare for devices to be represented by bare device structures;
+ * instead, that structure, like kobject structures, is usually embedded within
+ * a higher-level representation of the device.
+ */
+struct device {
+	struct device		*parent;
+
+	struct device_private	*p;
+
+	struct kobject kobj;
+	const char		*init_name; /* initial name of the device */
+	const struct device_type *type;
+
+	struct mutex		mutex;	/* mutex to synchronize calls to
+					 * its driver.
+					 */
+
+	struct bus_type	*bus;		/* type of bus device is on */
+	struct device_driver *driver;	/* which driver has allocated this
+					   device */
+	void		*platform_data;	/* Platform specific data, device
+					   core doesn't touch it */
+	struct dev_pm_info	power;
+	struct dev_pm_domain	*pm_domain;
+
+#ifdef CONFIG_NUMA
+	int		numa_node;	/* NUMA node this device is close to */
+#endif
+	u64		*dma_mask;	/* dma mask (if dma'able device) */
+	u64		coherent_dma_mask;/* Like dma_mask, but for
+					     alloc_coherent mappings as
+					     not all hardware supports
+					     64 bit addresses for consistent
+					     allocations such descriptors. */
+
+	struct device_dma_parameters *dma_parms;
+
+	struct list_head	dma_pools;	/* dma pools (if dma'ble) */
+
+	struct dma_coherent_mem	*dma_mem; /* internal for coherent mem
+					     override */
+	/* arch specific additions */
+	struct dev_archdata	archdata;
+
+	struct device_node	*of_node; /* associated device tree node */
+
+	dev_t			devt;	/* dev_t, creates the sysfs "dev" */
+	u32			id;	/* device instance */
+
+	spinlock_t		devres_lock;
+	struct list_head	devres_head;
+
+	struct klist_node	knode_class;
+	struct class		*class;
+	const struct attribute_group **groups;	/* optional groups */
+
+	void	(*release)(struct device *dev);
+};
+
+/* Get the wakeup routines, which depend on struct device */
+#include <linux/pm_wakeup.h>
+
+static inline const char *dev_name(const struct device *dev)
+{
+	/* Use the init name until the kobject becomes available */
+	if (dev->init_name)
+		return dev->init_name;
+
+	return kobject_name(&dev->kobj);
+}
+
+extern __printf(2, 3)
+int dev_set_name(struct device *dev, const char *name, ...);
+
+#ifdef CONFIG_NUMA
+static inline int dev_to_node(struct device *dev)
+{
+	return dev->numa_node;
+}
+static inline void set_dev_node(struct device *dev, int node)
+{
+	dev->numa_node = node;
+}
+#else
+static inline int dev_to_node(struct device *dev)
+{
+	return -1;
+}
+static inline void set_dev_node(struct device *dev, int node)
+{
+}
+#endif
+
+static inline struct pm_subsys_data *dev_to_psd(struct device *dev)
+{
+	return dev ? dev->power.subsys_data : NULL;
+}
+
+static inline unsigned int dev_get_uevent_suppress(const struct device *dev)
+{
+	return dev->kobj.uevent_suppress;
+}
+
+static inline void dev_set_uevent_suppress(struct device *dev, int val)
+{
+	dev->kobj.uevent_suppress = val;
+}
+
+static inline int device_is_registered(struct device *dev)
+{
+	return dev->kobj.state_in_sysfs;
+}
+
+static inline void device_enable_async_suspend(struct device *dev)
+{
+	if (!dev->power.is_prepared)
+		dev->power.async_suspend = true;
+}
+
+static inline void device_disable_async_suspend(struct device *dev)
+{
+	if (!dev->power.is_prepared)
+		dev->power.async_suspend = false;
+}
+
+static inline bool device_async_suspend_enabled(struct device *dev)
+{
+	return !!dev->power.async_suspend;
+}
+
+static inline void pm_suspend_ignore_children(struct device *dev, bool enable)
+{
+	dev->power.ignore_children = enable;
+}
+
+static inline void device_lock(struct device *dev)
+{
+	mutex_lock(&dev->mutex);
+}
+
+static inline int device_trylock(struct device *dev)
+{
+	return mutex_trylock(&dev->mutex);
+}
+
+static inline void device_unlock(struct device *dev)
+{
+	mutex_unlock(&dev->mutex);
+}
+
+void driver_init(void);
+
+/*
+ * High level routines for use by the bus drivers
+ */
+extern int __must_check device_register(struct device *dev);
+extern void device_unregister(struct device *dev);
+extern void device_initialize(struct device *dev);
+extern int __must_check device_add(struct device *dev);
+extern void device_del(struct device *dev);
+extern int device_for_each_child(struct device *dev, void *data,
+		     int (*fn)(struct device *dev, void *data));
+extern struct device *device_find_child(struct device *dev, void *data,
+				int (*match)(struct device *dev, void *data));
+extern int device_rename(struct device *dev, const char *new_name);
+extern int device_move(struct device *dev, struct device *new_parent,
+		       enum dpm_order dpm_order);
+extern const char *device_get_devnode(struct device *dev,
+				      umode_t *mode, const char **tmp);
+extern void *dev_get_drvdata(const struct device *dev);
+extern int dev_set_drvdata(struct device *dev, void *data);
+
+/*
+ * Root device objects for grouping under /sys/devices
+ */
+extern struct device *__root_device_register(const char *name,
+					     struct module *owner);
+
+/*
+ * This is a macro to avoid include problems with THIS_MODULE,
+ * just as per what is done for device_schedule_callback() above.
+ */
+#define root_device_register(name) \
+	__root_device_register(name, THIS_MODULE)
+
+extern void root_device_unregister(struct device *root);
+
+static inline void *dev_get_platdata(const struct device *dev)
+{
+	return dev->platform_data;
+}
+
+/*
+ * Manual binding of a device to driver. See drivers/base/bus.c
+ * for information on use.
+ */
+extern int __must_check device_bind_driver(struct device *dev);
+extern void device_release_driver(struct device *dev);
+extern int  __must_check device_attach(struct device *dev);
+extern int __must_check driver_attach(struct device_driver *drv);
+extern int __must_check device_reprobe(struct device *dev);
+
+/*
+ * Easy functions for dynamically creating devices on the fly
+ */
+extern struct device *device_create_vargs(struct class *cls,
+					  struct device *parent,
+					  dev_t devt,
+					  void *drvdata,
+					  const char *fmt,
+					  va_list vargs);
+extern __printf(5, 6)
+struct device *device_create(struct class *cls, struct device *parent,
+			     dev_t devt, void *drvdata,
+			     const char *fmt, ...);
+extern void device_destroy(struct class *cls, dev_t devt);
+
+/*
+ * Platform "fixup" functions - allow the platform to have their say
+ * about devices and actions that the general device layer doesn't
+ * know about.
+ */
+/* Notify platform of device discovery */
+extern int (*platform_notify)(struct device *dev);
+
+extern int (*platform_notify_remove)(struct device *dev);
+
+
+/*
+ * get_device - atomically increment the reference count for the device.
+ *
+ */
+extern struct device *get_device(struct device *dev);
+extern void put_device(struct device *dev);
+
+extern void wait_for_device_probe(void);
+
+#ifdef CONFIG_DEVTMPFS
+extern int devtmpfs_create_node(struct device *dev);
+extern int devtmpfs_delete_node(struct device *dev);
+extern int devtmpfs_mount(const char *mntdir);
+#else
+static inline int devtmpfs_create_node(struct device *dev) { return 0; }
+static inline int devtmpfs_delete_node(struct device *dev) { return 0; }
+static inline int devtmpfs_mount(const char *mountpoint) { return 0; }
+#endif
+
+/* drivers/base/power/shutdown.c */
+extern void device_shutdown(void);
+
+/* debugging and troubleshooting/diagnostic helpers. */
+extern const char *dev_driver_string(const struct device *dev);
+
+
+#ifdef CONFIG_PRINTK
+
+extern int __dev_printk(const char *level, const struct device *dev,
+			struct va_format *vaf);
+extern __printf(3, 4)
+int dev_printk(const char *level, const struct device *dev,
+	       const char *fmt, ...)
+	;
+extern __printf(2, 3)
+int dev_emerg(const struct device *dev, const char *fmt, ...);
+extern __printf(2, 3)
+int dev_alert(const struct device *dev, const char *fmt, ...);
+extern __printf(2, 3)
+int dev_crit(const struct device *dev, const char *fmt, ...);
+extern __printf(2, 3)
+int dev_err(const struct device *dev, const char *fmt, ...);
+extern __printf(2, 3)
+int dev_warn(const struct device *dev, const char *fmt, ...);
+extern __printf(2, 3)
+int dev_notice(const struct device *dev, const char *fmt, ...);
+extern __printf(2, 3)
+int _dev_info(const struct device *dev, const char *fmt, ...);
+
+#else
+
+static inline int __dev_printk(const char *level, const struct device *dev,
+			       struct va_format *vaf)
+{ return 0; }
+static inline __printf(3, 4)
+int dev_printk(const char *level, const struct device *dev,
+	       const char *fmt, ...)
+{ return 0; }
+
+static inline __printf(2, 3)
+int dev_emerg(const struct device *dev, const char *fmt, ...)
+{ return 0; }
+static inline __printf(2, 3)
+int dev_crit(const struct device *dev, const char *fmt, ...)
+{ return 0; }
+static inline __printf(2, 3)
+int dev_alert(const struct device *dev, const char *fmt, ...)
+{ return 0; }
+static inline __printf(2, 3)
+int dev_err(const struct device *dev, const char *fmt, ...)
+{ return 0; }
+static inline __printf(2, 3)
+int dev_warn(const struct device *dev, const char *fmt, ...)
+{ return 0; }
+static inline __printf(2, 3)
+int dev_notice(const struct device *dev, const char *fmt, ...)
+{ return 0; }
+static inline __printf(2, 3)
+int _dev_info(const struct device *dev, const char *fmt, ...)
+{ return 0; }
+
+#endif
+
+/*
+ * Stupid hackaround for existing uses of non-printk uses dev_info
+ *
+ * Note that the definition of dev_info below is actually _dev_info
+ * and a macro is used to avoid redefining dev_info
+ */
+
+#define dev_info(dev, fmt, arg...) _dev_info(dev, fmt, ##arg)
+
+#if defined(CONFIG_DYNAMIC_DEBUG)
+#define dev_dbg(dev, format, ...)		     \
+do {						     \
+	dynamic_dev_dbg(dev, format, ##__VA_ARGS__); \
+} while (0)
+#elif defined(DEBUG)
+#define dev_dbg(dev, format, arg...)		\
+	dev_printk(KERN_DEBUG, dev, format, ##arg)
+#else
+#define dev_dbg(dev, format, arg...)				\
+({								\
+	if (0)							\
+		dev_printk(KERN_DEBUG, dev, format, ##arg);	\
+	0;							\
+})
+#endif
+
+#ifdef VERBOSE_DEBUG
+#define dev_vdbg	dev_dbg
+#else
+#define dev_vdbg(dev, format, arg...)				\
+({								\
+	if (0)							\
+		dev_printk(KERN_DEBUG, dev, format, ##arg);	\
+	0;							\
+})
+#endif
+
+/*
+ * dev_WARN*() acts like dev_printk(), but with the key difference
+ * of using a WARN/WARN_ON to get the message out, including the
+ * file/line information and a backtrace.
+ */
+#define dev_WARN(dev, format, arg...) \
+	WARN(1, "Device: %s\n" format, dev_driver_string(dev), ## arg);
+
+#define dev_WARN_ONCE(dev, condition, format, arg...) \
+	WARN_ONCE(condition, "Device %s\n" format, \
+			dev_driver_string(dev), ## arg)
+
+/* Create alias, so I can be autoloaded. */
+#define MODULE_ALIAS_CHARDEV(major,minor) \
+	MODULE_ALIAS("char-major-" __stringify(major) "-" __stringify(minor))
+#define MODULE_ALIAS_CHARDEV_MAJOR(major) \
+	MODULE_ALIAS("char-major-" __stringify(major) "-*")
+
+#ifdef CONFIG_SYSFS_DEPRECATED
+extern long sysfs_deprecated;
+#else
+#define sysfs_deprecated 0
+#endif
+
+/**
+ * module_driver() - Helper macro for drivers that don't do anything
+ * special in module init/exit. This eliminates a lot of boilerplate.
+ * Each module may only use this macro once, and calling it replaces
+ * module_init() and module_exit().
+ *
+ * @__driver: driver name
+ * @__register: register function for this driver type
+ * @__unregister: unregister function for this driver type
+ * @...: Additional arguments to be passed to __register and __unregister.
+ *
+ * Use this macro to construct bus specific macros for registering
+ * drivers, and do not use it on its own.
+ */
+#define module_driver(__driver, __register, __unregister, ...) \
+static int __init __driver##_init(void) \
+{ \
+	return __register(&(__driver) , ##__VA_ARGS__); \
+} \
+module_init(__driver##_init); \
+static void __exit __driver##_exit(void) \
+{ \
+	__unregister(&(__driver) , ##__VA_ARGS__); \
+} \
+module_exit(__driver##_exit);
+
+#endif /* _DEVICE_H_ */
diff --git a/include/linux/device_cgroup.h b/include/linux/device_cgroup.h
new file mode 100644
index 00000000..8b64221b
--- /dev/null
+++ b/include/linux/device_cgroup.h
@@ -0,0 +1,19 @@
+#include <linux/fs.h>
+
+#ifdef CONFIG_CGROUP_DEVICE
+extern int __devcgroup_inode_permission(struct inode *inode, int mask);
+extern int devcgroup_inode_mknod(int mode, dev_t dev);
+static inline int devcgroup_inode_permission(struct inode *inode, int mask)
+{
+	if (likely(!inode->i_rdev))
+		return 0;
+	if (!S_ISBLK(inode->i_mode) && !S_ISCHR(inode->i_mode))
+		return 0;
+	return __devcgroup_inode_permission(inode, mask);
+}
+#else
+static inline int devcgroup_inode_permission(struct inode *inode, int mask)
+{ return 0; }
+static inline int devcgroup_inode_mknod(int mode, dev_t dev)
+{ return 0; }
+#endif
diff --git a/include/linux/devpts_fs.h b/include/linux/devpts_fs.h
new file mode 100644
index 00000000..5ce0e5fd
--- /dev/null
+++ b/include/linux/devpts_fs.h
@@ -0,0 +1,49 @@
+/* -*- linux-c -*- --------------------------------------------------------- *
+ *
+ * linux/include/linux/devpts_fs.h
+ *
+ *  Copyright 1998-2004 H. Peter Anvin -- All Rights Reserved
+ *
+ * This file is part of the Linux kernel and is made available under
+ * the terms of the GNU General Public License, version 2, or at your
+ * option, any later version, incorporated herein by reference.
+ *
+ * ------------------------------------------------------------------------- */
+
+#ifndef _LINUX_DEVPTS_FS_H
+#define _LINUX_DEVPTS_FS_H
+
+#include <linux/errno.h>
+
+#ifdef CONFIG_UNIX98_PTYS
+
+int devpts_new_index(struct inode *ptmx_inode);
+void devpts_kill_index(struct inode *ptmx_inode, int idx);
+/* mknod in devpts */
+int devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty);
+/* get tty structure */
+struct tty_struct *devpts_get_tty(struct inode *pts_inode, int number);
+/* unlink */
+void devpts_pty_kill(struct tty_struct *tty);
+
+#else
+
+/* Dummy stubs in the no-pty case */
+static inline int devpts_new_index(struct inode *ptmx_inode) { return -EINVAL; }
+static inline void devpts_kill_index(struct inode *ptmx_inode, int idx) { }
+static inline int devpts_pty_new(struct inode *ptmx_inode,
+				struct tty_struct *tty)
+{
+	return -EINVAL;
+}
+static inline struct tty_struct *devpts_get_tty(struct inode *pts_inode,
+		int number)
+{
+	return NULL;
+}
+static inline void devpts_pty_kill(struct tty_struct *tty) { }
+
+#endif
+
+
+#endif /* _LINUX_DEVPTS_FS_H */
diff --git a/include/linux/digsig.h b/include/linux/digsig.h
new file mode 100644
index 00000000..6f85a070
--- /dev/null
+++ b/include/linux/digsig.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2011 Nokia Corporation
+ * Copyright (C) 2011 Intel Corporation
+ *
+ * Author:
+ * Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
+ *                 <dmitry.kasatkin@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, version 2 of the License.
+ *
+ */
+
+#ifndef _DIGSIG_H
+#define _DIGSIG_H
+
+#include <linux/key.h>
+
+enum pubkey_algo {
+	PUBKEY_ALGO_RSA,
+	PUBKEY_ALGO_MAX,
+};
+
+enum digest_algo {
+	DIGEST_ALGO_SHA1,
+	DIGEST_ALGO_SHA256,
+	DIGEST_ALGO_MAX
+};
+
+struct pubkey_hdr {
+	uint8_t		version;	/* key format version */
+	uint32_t	timestamp;	/* key made, always 0 for now */
+	uint8_t		algo;
+	uint8_t		nmpi;
+	char		mpi[0];
+} __packed;
+
+struct signature_hdr {
+	uint8_t		version;	/* signature format version */
+	uint32_t	timestamp;	/* signature made */
+	uint8_t		algo;
+	uint8_t		hash;
+	uint8_t		keyid[8];
+	uint8_t		nmpi;
+	char		mpi[0];
+} __packed;
+
+#if defined(CONFIG_SIGNATURE) || defined(CONFIG_SIGNATURE_MODULE)
+
+int digsig_verify(struct key *keyring, const char *sig, int siglen,
+					const char *digest, int digestlen);
+
+#else
+
+static inline int digsig_verify(struct key *keyring, const char *sig,
+				int siglen, const char *digest, int digestlen)
+{
+	return -EOPNOTSUPP;
+}
+
+#endif /* CONFIG_SIGNATURE */
+
+#endif /* _DIGSIG_H */
diff --git a/include/linux/dio.h b/include/linux/dio.h
new file mode 100644
index 00000000..2cc0fd00
--- /dev/null
+++ b/include/linux/dio.h
@@ -0,0 +1,280 @@
+/* header file for DIO boards for the HP300 architecture.
+ * Maybe this should handle DIO-II later?
+ * The general structure of this is vaguely based on how
+ * the Amiga port handles Zorro boards.
+ * Copyright (C) Peter Maydell 05/1998 <pmaydell@chiark.greenend.org.uk>
+ * Converted to driver model Jochen Friedrich <jochen@scram.de>
+ *
+ * The board IDs are from the NetBSD kernel, which for once provided
+ * helpful comments...
+ *
+ * This goes with drivers/dio/dio.c
+ */
+
+#ifndef _LINUX_DIO_H
+#define _LINUX_DIO_H
+
+/* The DIO boards in a system are distinguished by 'select codes' which 
+ * range from 0-63 (DIO) and 132-255 (DIO-II). 
+ * The DIO board with select code sc is located at physical address 
+ *     0x600000 + sc * 0x10000
+ * So DIO cards cover [0x600000-0x800000); the areas [0x200000-0x400000) and
+ * [0x800000-0x1000000) are for additional space required by things
+ * like framebuffers. [0x400000-0x600000) is for miscellaneous internal I/O.
+ * On Linux, this is currently all mapped into the virtual address space
+ * at 0xf0000000 on bootup.
+ * DIO-II boards are at 0x1000000 + (sc - 132) * 0x400000
+ * which is address range [0x1000000-0x20000000) -- too big to map completely,
+ * so currently we just don't handle DIO-II boards.  It wouldn't be hard to 
+ * do with ioremap() though.
+ */
+
+#include <linux/device.h>
+
+#ifdef __KERNEL__
+
+#include <asm/hp300hw.h>
+
+typedef __u16 dio_id;
+
+    /*
+     *  DIO devices
+     */
+
+struct dio_dev {
+	struct dio_bus *bus;
+	dio_id id;
+	int scode;
+	struct dio_driver *driver;	/* which driver has allocated this device */
+	struct device dev;		/* Generic device interface */
+	u8 ipl;
+	char name[64];
+	struct resource resource;
+};
+
+#define to_dio_dev(n) container_of(n, struct dio_dev, dev)
+
+    /*
+     *  DIO bus
+     */
+
+struct dio_bus {
+	struct list_head devices;           /* list of devices on this bus */
+	unsigned int num_resources;         /* number of resources */
+	struct resource resources[2];       /* address space routed to this bus */
+	struct device dev;
+	char name[10];
+};
+
+extern struct dio_bus dio_bus;      /* Single DIO bus */
+extern struct bus_type dio_bus_type;
+
+    /*
+     *  DIO device IDs
+     */
+
+struct dio_device_id {
+	dio_id id;                    /* Device ID or DIO_WILDCARD */
+	unsigned long driver_data;    /* Data private to the driver */
+};
+
+    /*
+     *  DIO device drivers
+     */
+
+struct dio_driver {
+	struct list_head node;
+	char *name;
+	const struct dio_device_id *id_table;     /* NULL if wants all devices */
+	int (*probe)(struct dio_dev *z, const struct dio_device_id *id);
+/* New device inserted */
+	void (*remove)(struct dio_dev *z);        /* Device removed (NULL if not a hot-plug capable driver) */
+	struct device_driver driver;
+};
+
+#define to_dio_driver(drv)    container_of(drv, struct dio_driver, driver)
+
+/* DIO/DIO-II boards all have the following 8bit registers.
+ * These are offsets from the base of the device.
+ */
+#define DIO_IDOFF     0x01             /* primary device ID */
+#define DIO_IPLOFF    0x03             /* interrupt priority level */
+#define DIO_SECIDOFF  0x15             /* secondary device ID */
+#define DIOII_SIZEOFF 0x101            /* device size, DIO-II only */
+#define DIO_VIRADDRBASE 0xf0000000UL   /* vir addr where IOspace is mapped */
+
+#define DIO_BASE                0x600000        /* start of DIO space */
+#define DIO_END                 0x1000000       /* end of DIO space */
+#define DIO_DEVSIZE             0x10000         /* size of a DIO device */
+
+#define DIOII_BASE              0x01000000      /* start of DIO-II space */
+#define DIOII_END               0x20000000      /* end of DIO-II space */
+#define DIOII_DEVSIZE           0x00400000      /* size of a DIO-II device */
+
+/* Highest valid select code. If we add DIO-II support this should become
+ * 256 for everything except HP320, which only has DIO.
+ */
+#define DIO_SCMAX (hp300_model == HP_320 ? 32 : 256)
+#define DIOII_SCBASE 132 /* lowest DIO-II select code */
+#define DIO_SCINHOLE(scode) (((scode) >= 32) && ((scode) < DIOII_SCBASE))
+#define DIO_ISDIOII(scode) ((scode) >= 132 && (scode) < 256)
+
+/* macros to read device IDs, given base address */
+#define DIO_ID(baseaddr) in_8((baseaddr) + DIO_IDOFF)
+#define DIO_SECID(baseaddr) in_8((baseaddr) + DIO_SECIDOFF)
+
+/* extract the interrupt level */
+#define DIO_IPL(baseaddr) (((in_8((baseaddr) + DIO_IPLOFF) >> 4) & 0x03) + 3)
+
+/* find the size of a DIO-II board's address space.
+ * DIO boards are all fixed length.
+ */
+#define DIOII_SIZE(baseaddr) ((in_8((baseaddr) + DIOII_SIZEOFF) + 1) * 0x100000)
+
+/* general purpose macro for both DIO and DIO-II */
+#define DIO_SIZE(scode, base) (DIO_ISDIOII((scode)) ? DIOII_SIZE((base)) : DIO_DEVSIZE)
+
+/* The hardware has primary and secondary IDs; we encode these in a single
+ * int as PRIMARY ID & (SECONDARY ID << 8).
+ * In practice this is only important for framebuffers,
+ * and everybody else just sets ID fields equal to the DIO_ID_FOO value.
+ */
+#define DIO_ENCODE_ID(pr,sec) ((((int)sec & 0xff) << 8) | ((int)pr & 0xff))
+/* macro to determine whether a given primary ID requires a secondary ID byte */
+#define DIO_NEEDSSECID(id) ((id) == DIO_ID_FBUFFER)
+#define DIO_WILDCARD 0xff
+
+/* Now a whole slew of macros giving device IDs and descriptive strings: */
+#define DIO_ID_DCA0     0x02 /* 98644A serial */
+#define DIO_DESC_DCA0 "98644A DCA0 serial"
+#define DIO_ID_DCA0REM  0x82 /* 98644A serial */
+#define DIO_DESC_DCA0REM "98644A DCA0REM serial"
+#define DIO_ID_DCA1     0x42 /* 98644A serial */
+#define DIO_DESC_DCA1 "98644A DCA1 serial"
+#define DIO_ID_DCA1REM  0xc2 /* 98644A serial */
+#define DIO_DESC_DCA1REM "98644A DCA1REM serial"
+#define DIO_ID_DCM      0x05 /* 98642A serial MUX */
+#define DIO_DESC_DCM "98642A DCM serial MUX"
+#define DIO_ID_DCMREM   0x85 /* 98642A serial MUX */
+#define DIO_DESC_DCMREM "98642A DCMREM serial MUX"
+#define DIO_ID_LAN      0x15 /* 98643A LAN */
+#define DIO_DESC_LAN "98643A LANCE ethernet"
+#define DIO_ID_FHPIB    0x08 /* 98625A/98625B fast HP-IB */
+#define DIO_DESC_FHPIB "98625A/98625B fast HPIB"
+#define DIO_ID_NHPIB    0x01 /* 98624A HP-IB (normal ie slow) */
+#define DIO_DESC_NHPIB "98624A HPIB"
+#define DIO_ID_SCSI0    0x07 /* 98265A SCSI */
+#define DIO_DESC_SCSI0 "98265A SCSI0"
+#define DIO_ID_SCSI1    0x27 /* ditto */
+#define DIO_DESC_SCSI1 "98265A SCSI1"
+#define DIO_ID_SCSI2    0x47 /* ditto */
+#define DIO_DESC_SCSI2 "98265A SCSI2"
+#define DIO_ID_SCSI3    0x67 /* ditto */
+#define DIO_DESC_SCSI3 "98265A SCSI3"
+#define DIO_ID_FBUFFER  0x39 /* framebuffer: flavour is distinguished by secondary ID */
+#define DIO_DESC_FBUFFER "bitmapped display"
+/* the NetBSD kernel source is a bit unsure as to what these next IDs actually do :-> */
+#define DIO_ID_MISC0    0x03 /* 98622A */
+#define DIO_DESC_MISC0 "98622A"
+#define DIO_ID_MISC1    0x04 /* 98623A */
+#define DIO_DESC_MISC1 "98623A"
+#define DIO_ID_PARALLEL 0x06 /* internal parallel */
+#define DIO_DESC_PARALLEL "internal parallel"
+#define DIO_ID_MISC2    0x09 /* 98287A keyboard */
+#define DIO_DESC_MISC2 "98287A keyboard"
+#define DIO_ID_MISC3    0x0a /* HP98635A FP accelerator */
+#define DIO_DESC_MISC3 "HP98635A FP accelerator"
+#define DIO_ID_MISC4    0x0b /* timer */
+#define DIO_DESC_MISC4 "timer"
+#define DIO_ID_MISC5    0x12 /* 98640A */
+#define DIO_DESC_MISC5 "98640A"
+#define DIO_ID_MISC6    0x16 /* 98659A */
+#define DIO_DESC_MISC6 "98659A"
+#define DIO_ID_MISC7    0x19 /* 237 display */
+#define DIO_DESC_MISC7 "237 display"
+#define DIO_ID_MISC8    0x1a /* quad-wide card */
+#define DIO_DESC_MISC8 "quad-wide card"
+#define DIO_ID_MISC9    0x1b /* 98253A */
+#define DIO_DESC_MISC9 "98253A"
+#define DIO_ID_MISC10   0x1c /* 98627A */
+#define DIO_DESC_MISC10 "98253A"
+#define DIO_ID_MISC11   0x1d /* 98633A */
+#define DIO_DESC_MISC11 "98633A"
+#define DIO_ID_MISC12   0x1e /* 98259A */
+#define DIO_DESC_MISC12 "98259A"
+#define DIO_ID_MISC13   0x1f /* 8741 */
+#define DIO_DESC_MISC13 "8741"
+#define DIO_ID_VME      0x31 /* 98577A VME adapter */
+#define DIO_DESC_VME "98577A VME adapter"
+#define DIO_ID_DCL      0x34 /* 98628A serial */
+#define DIO_DESC_DCL "98628A DCL serial"
+#define DIO_ID_DCLREM   0xb4 /* 98628A serial */
+#define DIO_DESC_DCLREM "98628A DCLREM serial"
+/* These are the secondary IDs for the framebuffers */
+#define DIO_ID2_GATORBOX    0x01 /* 98700/98710 "gatorbox" */
+#define DIO_DESC2_GATORBOX       "98700/98710 \"gatorbox\" display"
+#define DIO_ID2_TOPCAT      0x02 /* 98544/98545/98547 "topcat" */
+#define DIO_DESC2_TOPCAT         "98544/98545/98547 \"topcat\" display"
+#define DIO_ID2_RENAISSANCE 0x04 /* 98720/98721 "renaissance" */
+#define DIO_DESC2_RENAISSANCE    "98720/98721 \"renaissance\" display"
+#define DIO_ID2_LRCATSEYE   0x05 /* lowres "catseye" */
+#define DIO_DESC2_LRCATSEYE      "low-res catseye display"
+#define DIO_ID2_HRCCATSEYE  0x06 /* highres colour "catseye" */
+#define DIO_DESC2_HRCCATSEYE     "high-res color catseye display"
+#define DIO_ID2_HRMCATSEYE  0x07 /* highres mono "catseye" */
+#define DIO_DESC2_HRMCATSEYE     "high-res mono catseye display"
+#define DIO_ID2_DAVINCI     0x08 /* 98730/98731 "davinci" */
+#define DIO_DESC2_DAVINCI        "98730/98731 \"davinci\" display"
+#define DIO_ID2_XXXCATSEYE  0x09 /* "catseye" */
+#define DIO_DESC2_XXXCATSEYE     "catseye display"
+#define DIO_ID2_HYPERION    0x0e /* A1096A "hyperion" */
+#define DIO_DESC2_HYPERION       "A1096A \"hyperion\" display"
+#define DIO_ID2_XGENESIS    0x0b /* "x-genesis"; no NetBSD support */
+#define DIO_DESC2_XGENESIS       "\"x-genesis\" display"
+#define DIO_ID2_TIGER       0x0c /* "tiger"; no NetBSD support */
+#define DIO_DESC2_TIGER          "\"tiger\" display"
+#define DIO_ID2_YGENESIS    0x0d /* "y-genesis"; no NetBSD support */
+#define DIO_DESC2_YGENESIS       "\"y-genesis\" display"
+/* if you add new IDs then you should tell dio.c about them so it can
+ * identify them...
+ */
+
+extern int dio_find(int deviceid);
+extern unsigned long dio_scodetophysaddr(int scode);
+extern int dio_create_sysfs_dev_files(struct dio_dev *);
+
+/* New-style probing */
+extern int dio_register_driver(struct dio_driver *);
+extern void dio_unregister_driver(struct dio_driver *);
+extern const struct dio_device_id *dio_match_device(const struct dio_device_id *ids, const struct dio_dev *z);
+static inline struct dio_driver *dio_dev_driver(const struct dio_dev *d)
+{
+    return d->driver;
+}
+
+#define dio_resource_start(d) ((d)->resource.start)
+#define dio_resource_end(d)   ((d)->resource.end)
+#define dio_resource_len(d)   (resource_size(&(d)->resource))
+#define dio_resource_flags(d) ((d)->resource.flags)
+
+#define dio_request_device(d, name) \
+    request_mem_region(dio_resource_start(d), dio_resource_len(d), name)
+#define dio_release_device(d) \
+    release_mem_region(dio_resource_start(d), dio_resource_len(d))
+
+/* Similar to the helpers above, these manipulate per-dio_dev
+ * driver-specific data.  They are really just a wrapper around
+ * the generic device structure functions of these calls.
+ */
+static inline void *dio_get_drvdata (struct dio_dev *d)
+{
+	return dev_get_drvdata(&d->dev);
+}
+
+static inline void dio_set_drvdata (struct dio_dev *d, void *data)
+{
+	dev_set_drvdata(&d->dev, data);
+}
+
+#endif /* __KERNEL__ */
+#endif /* ndef _LINUX_DIO_H */
diff --git a/include/linux/dirent.h b/include/linux/dirent.h
new file mode 100644
index 00000000..f072fb8d
--- /dev/null
+++ b/include/linux/dirent.h
@@ -0,0 +1,12 @@
+#ifndef _LINUX_DIRENT_H
+#define _LINUX_DIRENT_H
+
+struct linux_dirent64 {
+	u64		d_ino;
+	s64		d_off;
+	unsigned short	d_reclen;
+	unsigned char	d_type;
+	char		d_name[0];
+};
+
+#endif
diff --git a/include/linux/dlm.h b/include/linux/dlm.h
new file mode 100644
index 00000000..6c7f6e95
--- /dev/null
+++ b/include/linux/dlm.h
@@ -0,0 +1,233 @@
+/******************************************************************************
+*******************************************************************************
+**
+**  Copyright (C) Sistina Software, Inc.  1997-2003  All rights reserved.
+**  Copyright (C) 2004-2011 Red Hat, Inc.  All rights reserved.
+**
+**  This copyrighted material is made available to anyone wishing to use,
+**  modify, copy, or redistribute it subject to the terms and conditions
+**  of the GNU General Public License v.2.
+**
+*******************************************************************************
+******************************************************************************/
+
+#ifndef __DLM_DOT_H__
+#define __DLM_DOT_H__
+
+/*
+ * Interface to Distributed Lock Manager (DLM)
+ * routines and structures to use DLM lockspaces
+ */
+
+/* Lock levels and flags are here */
+#include <linux/dlmconstants.h>
+#include <linux/types.h>
+
+typedef void dlm_lockspace_t;
+
+/*
+ * Lock status block
+ *
+ * Use this structure to specify the contents of the lock value block.  For a
+ * conversion request, this structure is used to specify the lock ID of the
+ * lock.  DLM writes the status of the lock request and the lock ID assigned
+ * to the request in the lock status block.
+ *
+ * sb_lkid: the returned lock ID.  It is set on new (non-conversion) requests.
+ * It is available when dlm_lock returns.
+ *
+ * sb_lvbptr: saves or returns the contents of the lock's LVB according to rules
+ * shown for the DLM_LKF_VALBLK flag.
+ *
+ * sb_flags: DLM_SBF_DEMOTED is returned if in the process of promoting a lock,
+ * it was first demoted to NL to avoid conversion deadlock.
+ * DLM_SBF_VALNOTVALID is returned if the resource's LVB is marked invalid.
+ *
+ * sb_status: the returned status of the lock request set prior to AST
+ * execution.  Possible return values:
+ *
+ * 0 if lock request was successful
+ * -EAGAIN if request would block and is flagged DLM_LKF_NOQUEUE
+ * -DLM_EUNLOCK if unlock request was successful
+ * -DLM_ECANCEL if a cancel completed successfully
+ * -EDEADLK if a deadlock was detected
+ * -ETIMEDOUT if the lock request was canceled due to a timeout
+ */
+
+#define DLM_SBF_DEMOTED		0x01
+#define DLM_SBF_VALNOTVALID	0x02
+#define DLM_SBF_ALTMODE		0x04
+
+struct dlm_lksb {
+	int 	 sb_status;
+	__u32	 sb_lkid;
+	char 	 sb_flags;
+	char *	 sb_lvbptr;
+};
+
+/* dlm_new_lockspace() flags */
+
+#define DLM_LSFL_NODIR		0x00000001
+#define DLM_LSFL_TIMEWARN	0x00000002
+#define DLM_LSFL_FS     	0x00000004
+#define DLM_LSFL_NEWEXCL     	0x00000008
+
+#ifdef __KERNEL__
+
+struct dlm_slot {
+	int nodeid; /* 1 to MAX_INT */
+	int slot;   /* 1 to MAX_INT */
+};
+
+/*
+ * recover_prep: called before the dlm begins lock recovery.
+ *   Notfies lockspace user that locks from failed members will be granted.
+ * recover_slot: called after recover_prep and before recover_done.
+ *   Identifies a failed lockspace member.
+ * recover_done: called after the dlm completes lock recovery.
+ *   Identifies lockspace members and lockspace generation number.
+ */
+
+struct dlm_lockspace_ops {
+	void (*recover_prep) (void *ops_arg);
+	void (*recover_slot) (void *ops_arg, struct dlm_slot *slot);
+	void (*recover_done) (void *ops_arg, struct dlm_slot *slots,
+			      int num_slots, int our_slot, uint32_t generation);
+};
+
+/*
+ * dlm_new_lockspace
+ *
+ * Create/join a lockspace.
+ *
+ * name: lockspace name, null terminated, up to DLM_LOCKSPACE_LEN (not
+ *   including terminating null).
+ *
+ * cluster: cluster name, null terminated, up to DLM_LOCKSPACE_LEN (not
+ *   including terminating null).  Optional.  When cluster is null, it
+ *   is not used.  When set, dlm_new_lockspace() returns -EBADR if cluster
+ *   is not equal to the dlm cluster name.
+ *
+ * flags:
+ * DLM_LSFL_NODIR
+ *   The dlm should not use a resource directory, but statically assign
+ *   resource mastery to nodes based on the name hash that is otherwise
+ *   used to select the directory node.  Must be the same on all nodes.
+ * DLM_LSFL_TIMEWARN
+ *   The dlm should emit netlink messages if locks have been waiting
+ *   for a configurable amount of time.  (Unused.)
+ * DLM_LSFL_FS
+ *   The lockspace user is in the kernel (i.e. filesystem).  Enables
+ *   direct bast/cast callbacks.
+ * DLM_LSFL_NEWEXCL
+ *   dlm_new_lockspace() should return -EEXIST if the lockspace exists.
+ *
+ * lvblen: length of lvb in bytes.  Must be multiple of 8.
+ *   dlm_new_lockspace() returns an error if this does not match
+ *   what other nodes are using.
+ *
+ * ops: callbacks that indicate lockspace recovery points so the
+ *   caller can coordinate its recovery and know lockspace members.
+ *   This is only used by the initial dlm_new_lockspace() call.
+ *   Optional.
+ *
+ * ops_arg: arg for ops callbacks.
+ *
+ * ops_result: tells caller if the ops callbacks (if provided) will
+ *   be used or not.  0: will be used, -EXXX will not be used.
+ *   -EOPNOTSUPP: the dlm does not have recovery_callbacks enabled.
+ *
+ * lockspace: handle for dlm functions
+ */
+
+int dlm_new_lockspace(const char *name, const char *cluster,
+		      uint32_t flags, int lvblen,
+		      const struct dlm_lockspace_ops *ops, void *ops_arg,
+		      int *ops_result, dlm_lockspace_t **lockspace);
+
+/*
+ * dlm_release_lockspace
+ *
+ * Stop a lockspace.
+ */
+
+int dlm_release_lockspace(dlm_lockspace_t *lockspace, int force);
+
+/*
+ * dlm_lock
+ *
+ * Make an asyncronous request to acquire or convert a lock on a named
+ * resource.
+ *
+ * lockspace: context for the request
+ * mode: the requested mode of the lock (DLM_LOCK_)
+ * lksb: lock status block for input and async return values
+ * flags: input flags (DLM_LKF_)
+ * name: name of the resource to lock, can be binary
+ * namelen: the length in bytes of the resource name (MAX_RESNAME_LEN)
+ * parent: the lock ID of a parent lock or 0 if none
+ * lockast: function DLM executes when it completes processing the request
+ * astarg: argument passed to lockast and bast functions
+ * bast: function DLM executes when this lock later blocks another request
+ *
+ * Returns:
+ * 0 if request is successfully queued for processing
+ * -EINVAL if any input parameters are invalid
+ * -EAGAIN if request would block and is flagged DLM_LKF_NOQUEUE
+ * -ENOMEM if there is no memory to process request
+ * -ENOTCONN if there is a communication error
+ *
+ * If the call to dlm_lock returns an error then the operation has failed and
+ * the AST routine will not be called.  If dlm_lock returns 0 it is still
+ * possible that the lock operation will fail. The AST routine will be called
+ * when the locking is complete and the status is returned in the lksb.
+ *
+ * If the AST routines or parameter are passed to a conversion operation then
+ * they will overwrite those values that were passed to a previous dlm_lock
+ * call.
+ *
+ * AST routines should not block (at least not for long), but may make
+ * any locking calls they please.
+ */
+
+int dlm_lock(dlm_lockspace_t *lockspace,
+	     int mode,
+	     struct dlm_lksb *lksb,
+	     uint32_t flags,
+	     void *name,
+	     unsigned int namelen,
+	     uint32_t parent_lkid,
+	     void (*lockast) (void *astarg),
+	     void *astarg,
+	     void (*bast) (void *astarg, int mode));
+
+/*
+ * dlm_unlock
+ *
+ * Asynchronously release a lock on a resource.  The AST routine is called
+ * when the resource is successfully unlocked.
+ *
+ * lockspace: context for the request
+ * lkid: the lock ID as returned in the lksb
+ * flags: input flags (DLM_LKF_)
+ * lksb: if NULL the lksb parameter passed to last lock request is used
+ * astarg: the arg used with the completion ast for the unlock
+ *
+ * Returns:
+ * 0 if request is successfully queued for processing
+ * -EINVAL if any input parameters are invalid
+ * -ENOTEMPTY if the lock still has sublocks
+ * -EBUSY if the lock is waiting for a remote lock operation
+ * -ENOTCONN if there is a communication error
+ */
+
+int dlm_unlock(dlm_lockspace_t *lockspace,
+	       uint32_t lkid,
+	       uint32_t flags,
+	       struct dlm_lksb *lksb,
+	       void *astarg);
+
+#endif				/* __KERNEL__ */
+
+#endif				/* __DLM_DOT_H__ */
+
diff --git a/include/linux/dlm_device.h b/include/linux/dlm_device.h
new file mode 100644
index 00000000..3060783c
--- /dev/null
+++ b/include/linux/dlm_device.h
@@ -0,0 +1,108 @@
+/******************************************************************************
+*******************************************************************************
+**
+**  Copyright (C) Sistina Software, Inc.  1997-2003  All rights reserved.
+**  Copyright (C) 2004-2007 Red Hat, Inc.  All rights reserved.
+**
+**  This copyrighted material is made available to anyone wishing to use,
+**  modify, copy, or redistribute it subject to the terms and conditions
+**  of the GNU General Public License v.2.
+**
+*******************************************************************************
+******************************************************************************/
+
+#ifndef _LINUX_DLM_DEVICE_H
+#define _LINUX_DLM_DEVICE_H
+
+/* This is the device interface for dlm, most users will use a library
+ * interface.
+ */
+
+#include <linux/dlm.h>
+#include <linux/types.h>
+
+#define DLM_USER_LVB_LEN	32
+
+/* Version of the device interface */
+#define DLM_DEVICE_VERSION_MAJOR 6
+#define DLM_DEVICE_VERSION_MINOR 0
+#define DLM_DEVICE_VERSION_PATCH 1
+
+/* struct passed to the lock write */
+struct dlm_lock_params {
+	__u8 mode;
+	__u8 namelen;
+	__u16 unused;
+	__u32 flags;
+	__u32 lkid;
+	__u32 parent;
+	__u64 xid;
+	__u64 timeout;
+	void __user *castparam;
+	void __user *castaddr;
+	void __user *bastparam;
+	void __user *bastaddr;
+	struct dlm_lksb __user *lksb;
+	char lvb[DLM_USER_LVB_LEN];
+	char name[0];
+};
+
+struct dlm_lspace_params {
+	__u32 flags;
+	__u32 minor;
+	char name[0];
+};
+
+struct dlm_purge_params {
+	__u32 nodeid;
+	__u32 pid;
+};
+
+struct dlm_write_request {
+	__u32 version[3];
+	__u8 cmd;
+	__u8 is64bit;
+	__u8 unused[2];
+
+	union  {
+		struct dlm_lock_params   lock;
+		struct dlm_lspace_params lspace;
+		struct dlm_purge_params  purge;
+	} i;
+};
+
+struct dlm_device_version {
+	__u32 version[3];
+};
+
+/* struct read from the "device" fd,
+   consists mainly of userspace pointers for the library to use */
+
+struct dlm_lock_result {
+	__u32 version[3];
+	__u32 length;
+	void __user * user_astaddr;
+	void __user * user_astparam;
+	struct dlm_lksb __user * user_lksb;
+	struct dlm_lksb lksb;
+	__u8 bast_mode;
+	__u8 unused[3];
+	/* Offsets may be zero if no data is present */
+	__u32 lvb_offset;
+};
+
+/* Commands passed to the device */
+#define DLM_USER_LOCK         1
+#define DLM_USER_UNLOCK       2
+#define DLM_USER_QUERY        3
+#define DLM_USER_CREATE_LOCKSPACE  4
+#define DLM_USER_REMOVE_LOCKSPACE  5
+#define DLM_USER_PURGE        6
+#define DLM_USER_DEADLOCK     7
+
+/* Lockspace flags */
+#define DLM_USER_LSFLG_AUTOFREE   1
+#define DLM_USER_LSFLG_FORCEFREE  2
+
+#endif
+
diff --git a/include/linux/dlm_netlink.h b/include/linux/dlm_netlink.h
new file mode 100644
index 00000000..647c8ef2
--- /dev/null
+++ b/include/linux/dlm_netlink.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2007 Red Hat, Inc.  All rights reserved.
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License v.2.
+ */
+
+#ifndef _DLM_NETLINK_H
+#define _DLM_NETLINK_H
+
+#include <linux/types.h>
+
+enum {
+	DLM_STATUS_WAITING = 1,
+	DLM_STATUS_GRANTED = 2,
+	DLM_STATUS_CONVERT = 3,
+};
+
+#define DLM_LOCK_DATA_VERSION 1
+
+struct dlm_lock_data {
+	__u16 version;
+	__u32 lockspace_id;
+	int nodeid;
+	int ownpid;
+	__u32 id;
+	__u32 remid;
+	__u64 xid;
+	__s8 status;
+	__s8 grmode;
+	__s8 rqmode;
+	unsigned long timestamp;
+	int resource_namelen;
+	char resource_name[DLM_RESNAME_MAXLEN];
+};
+
+enum {
+	DLM_CMD_UNSPEC = 0,
+	DLM_CMD_HELLO,		/* user->kernel */
+	DLM_CMD_TIMEOUT,	/* kernel->user */
+	__DLM_CMD_MAX,
+};
+
+#define DLM_CMD_MAX (__DLM_CMD_MAX - 1)
+
+enum {
+	DLM_TYPE_UNSPEC = 0,
+	DLM_TYPE_LOCK,
+	__DLM_TYPE_MAX,
+};
+
+#define DLM_TYPE_MAX (__DLM_TYPE_MAX - 1)
+
+#define DLM_GENL_VERSION 0x1
+#define DLM_GENL_NAME "DLM"
+
+#endif /* _DLM_NETLINK_H */
diff --git a/include/linux/dlm_plock.h b/include/linux/dlm_plock.h
new file mode 100644
index 00000000..3b1cc1be
--- /dev/null
+++ b/include/linux/dlm_plock.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2005-2008 Red Hat, Inc.  All rights reserved.
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License v.2.
+ */
+
+#ifndef __DLM_PLOCK_DOT_H__
+#define __DLM_PLOCK_DOT_H__
+
+#include <linux/types.h>
+
+#define DLM_PLOCK_MISC_NAME		"dlm_plock"
+
+#define DLM_PLOCK_VERSION_MAJOR	1
+#define DLM_PLOCK_VERSION_MINOR	2
+#define DLM_PLOCK_VERSION_PATCH	0
+
+enum {
+	DLM_PLOCK_OP_LOCK = 1,
+	DLM_PLOCK_OP_UNLOCK,
+	DLM_PLOCK_OP_GET,
+};
+
+#define DLM_PLOCK_FL_CLOSE 1
+
+struct dlm_plock_info {
+	__u32 version[3];
+	__u8 optype;
+	__u8 ex;
+	__u8 wait;
+	__u8 flags;
+	__u32 pid;
+	__s32 nodeid;
+	__s32 rv;
+	__u32 fsid;
+	__u64 number;
+	__u64 start;
+	__u64 end;
+	__u64 owner;
+};
+
+#ifdef __KERNEL__
+int dlm_posix_lock(dlm_lockspace_t *lockspace, u64 number, struct file *file,
+		int cmd, struct file_lock *fl);
+int dlm_posix_unlock(dlm_lockspace_t *lockspace, u64 number, struct file *file,
+		struct file_lock *fl);
+int dlm_posix_get(dlm_lockspace_t *lockspace, u64 number, struct file *file,
+		struct file_lock *fl);
+#endif /* __KERNEL__ */
+
+#endif
+
diff --git a/include/linux/dlmconstants.h b/include/linux/dlmconstants.h
new file mode 100644
index 00000000..47bf08dc
--- /dev/null
+++ b/include/linux/dlmconstants.h
@@ -0,0 +1,163 @@
+/******************************************************************************
+*******************************************************************************
+**
+**  Copyright (C) Sistina Software, Inc.  1997-2003  All rights reserved.
+**  Copyright (C) 2004-2007 Red Hat, Inc.  All rights reserved.
+**
+**  This copyrighted material is made available to anyone wishing to use,
+**  modify, copy, or redistribute it subject to the terms and conditions
+**  of the GNU General Public License v.2.
+**
+*******************************************************************************
+******************************************************************************/
+
+#ifndef __DLMCONSTANTS_DOT_H__
+#define __DLMCONSTANTS_DOT_H__
+
+/*
+ * Constants used by DLM interface.
+ */
+
+#define DLM_LOCKSPACE_LEN       64
+#define DLM_RESNAME_MAXLEN      64
+
+
+/*
+ * Lock Modes
+ */
+
+#define DLM_LOCK_IV		(-1)	/* invalid */
+#define DLM_LOCK_NL		0	/* null */
+#define DLM_LOCK_CR		1	/* concurrent read */
+#define DLM_LOCK_CW		2	/* concurrent write */
+#define DLM_LOCK_PR		3	/* protected read */
+#define DLM_LOCK_PW		4	/* protected write */
+#define DLM_LOCK_EX		5	/* exclusive */
+
+
+/*
+ * Flags to dlm_lock
+ *
+ * DLM_LKF_NOQUEUE
+ *
+ * Do not queue the lock request on the wait queue if it cannot be granted
+ * immediately.  If the lock cannot be granted because of this flag, DLM will
+ * either return -EAGAIN from the dlm_lock call or will return 0 from
+ * dlm_lock and -EAGAIN in the lock status block when the AST is executed.
+ *
+ * DLM_LKF_CANCEL
+ *
+ * Used to cancel a pending lock request or conversion.  A converting lock is
+ * returned to its previously granted mode.
+ *
+ * DLM_LKF_CONVERT
+ *
+ * Indicates a lock conversion request.  For conversions the name and namelen
+ * are ignored and the lock ID in the LKSB is used to identify the lock.
+ *
+ * DLM_LKF_VALBLK
+ *
+ * Requests DLM to return the current contents of the lock value block in the
+ * lock status block.  When this flag is set in a lock conversion from PW or EX
+ * modes, DLM assigns the value specified in the lock status block to the lock
+ * value block of the lock resource.  The LVB is a DLM_LVB_LEN size array
+ * containing application-specific information.
+ *
+ * DLM_LKF_QUECVT
+ *
+ * Force a conversion request to be queued, even if it is compatible with
+ * the granted modes of other locks on the same resource.
+ *
+ * DLM_LKF_IVVALBLK
+ *
+ * Invalidate the lock value block.
+ *
+ * DLM_LKF_CONVDEADLK
+ *
+ * Allows the dlm to resolve conversion deadlocks internally by demoting the
+ * granted mode of a converting lock to NL.  The DLM_SBF_DEMOTED flag is
+ * returned for a conversion that's been effected by this.
+ *
+ * DLM_LKF_PERSISTENT
+ *
+ * Only relevant to locks originating in userspace.  A persistent lock will not
+ * be removed if the process holding the lock exits.
+ *
+ * DLM_LKF_NODLCKWT
+ *
+ * Do not cancel the lock if it gets into conversion deadlock.
+ * Exclude this lock from being monitored due to DLM_LSFL_TIMEWARN.
+ *
+ * DLM_LKF_NODLCKBLK
+ *
+ * net yet implemented
+ *
+ * DLM_LKF_EXPEDITE
+ *
+ * Used only with new requests for NL mode locks.  Tells the lock manager
+ * to grant the lock, ignoring other locks in convert and wait queues.
+ *
+ * DLM_LKF_NOQUEUEBAST
+ *
+ * Send blocking AST's before returning -EAGAIN to the caller.  It is only
+ * used along with the NOQUEUE flag.  Blocking AST's are not sent for failed
+ * NOQUEUE requests otherwise.
+ *
+ * DLM_LKF_HEADQUE
+ *
+ * Add a lock to the head of the convert or wait queue rather than the tail.
+ *
+ * DLM_LKF_NOORDER
+ *
+ * Disregard the standard grant order rules and grant a lock as soon as it
+ * is compatible with other granted locks.
+ *
+ * DLM_LKF_ORPHAN
+ *
+ * not yet implemented
+ *
+ * DLM_LKF_ALTPR
+ *
+ * If the requested mode cannot be granted immediately, try to grant the lock
+ * in PR mode instead.  If this alternate mode is granted instead of the
+ * requested mode, DLM_SBF_ALTMODE is returned in the lksb.
+ *
+ * DLM_LKF_ALTCW
+ *
+ * The same as ALTPR, but the alternate mode is CW.
+ *
+ * DLM_LKF_FORCEUNLOCK
+ *
+ * Unlock the lock even if it is converting or waiting or has sublocks.
+ * Only really for use by the userland device.c code.
+ *
+ */
+
+#define DLM_LKF_NOQUEUE		0x00000001
+#define DLM_LKF_CANCEL		0x00000002
+#define DLM_LKF_CONVERT		0x00000004
+#define DLM_LKF_VALBLK		0x00000008
+#define DLM_LKF_QUECVT		0x00000010
+#define DLM_LKF_IVVALBLK	0x00000020
+#define DLM_LKF_CONVDEADLK	0x00000040
+#define DLM_LKF_PERSISTENT	0x00000080
+#define DLM_LKF_NODLCKWT	0x00000100
+#define DLM_LKF_NODLCKBLK	0x00000200
+#define DLM_LKF_EXPEDITE	0x00000400
+#define DLM_LKF_NOQUEUEBAST	0x00000800
+#define DLM_LKF_HEADQUE		0x00001000
+#define DLM_LKF_NOORDER		0x00002000
+#define DLM_LKF_ORPHAN		0x00004000
+#define DLM_LKF_ALTPR		0x00008000
+#define DLM_LKF_ALTCW		0x00010000
+#define DLM_LKF_FORCEUNLOCK	0x00020000
+#define DLM_LKF_TIMEOUT		0x00040000
+
+/*
+ * Some return codes that are not in errno.h
+ */
+
+#define DLM_ECANCEL		0x10001
+#define DLM_EUNLOCK		0x10002
+
+#endif  /* __DLMCONSTANTS_DOT_H__ */
diff --git a/include/linux/dm-dirty-log.h b/include/linux/dm-dirty-log.h
new file mode 100644
index 00000000..7084503c
--- /dev/null
+++ b/include/linux/dm-dirty-log.h
@@ -0,0 +1,146 @@
+/*
+ * Copyright (C) 2003 Sistina Software
+ * Copyright (C) 2004-2008 Red Hat, Inc. All rights reserved.
+ *
+ * Device-Mapper dirty region log.
+ *
+ * This file is released under the LGPL.
+ */
+
+#ifndef _LINUX_DM_DIRTY_LOG
+#define _LINUX_DM_DIRTY_LOG
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/device-mapper.h>
+
+typedef sector_t region_t;
+
+struct dm_dirty_log_type;
+
+struct dm_dirty_log {
+	struct dm_dirty_log_type *type;
+	int (*flush_callback_fn)(struct dm_target *ti);
+	void *context;
+};
+
+struct dm_dirty_log_type {
+	const char *name;
+	struct module *module;
+
+	/* For internal device-mapper use */
+	struct list_head list;
+
+	int (*ctr)(struct dm_dirty_log *log, struct dm_target *ti,
+		   unsigned argc, char **argv);
+	void (*dtr)(struct dm_dirty_log *log);
+
+	/*
+	 * There are times when we don't want the log to touch
+	 * the disk.
+	 */
+	int (*presuspend)(struct dm_dirty_log *log);
+	int (*postsuspend)(struct dm_dirty_log *log);
+	int (*resume)(struct dm_dirty_log *log);
+
+	/*
+	 * Retrieves the smallest size of region that the log can
+	 * deal with.
+	 */
+	uint32_t (*get_region_size)(struct dm_dirty_log *log);
+
+	/*
+	 * A predicate to say whether a region is clean or not.
+	 * May block.
+	 */
+	int (*is_clean)(struct dm_dirty_log *log, region_t region);
+
+	/*
+	 *  Returns: 0, 1, -EWOULDBLOCK, < 0
+	 *
+	 * A predicate function to check the area given by
+	 * [sector, sector + len) is in sync.
+	 *
+	 * If -EWOULDBLOCK is returned the state of the region is
+	 * unknown, typically this will result in a read being
+	 * passed to a daemon to deal with, since a daemon is
+	 * allowed to block.
+	 */
+	int (*in_sync)(struct dm_dirty_log *log, region_t region,
+		       int can_block);
+
+	/*
+	 * Flush the current log state (eg, to disk).  This
+	 * function may block.
+	 */
+	int (*flush)(struct dm_dirty_log *log);
+
+	/*
+	 * Mark an area as clean or dirty.  These functions may
+	 * block, though for performance reasons blocking should
+	 * be extremely rare (eg, allocating another chunk of
+	 * memory for some reason).
+	 */
+	void (*mark_region)(struct dm_dirty_log *log, region_t region);
+	void (*clear_region)(struct dm_dirty_log *log, region_t region);
+
+	/*
+	 * Returns: <0 (error), 0 (no region), 1 (region)
+	 *
+	 * The mirrord will need perform recovery on regions of
+	 * the mirror that are in the NOSYNC state.  This
+	 * function asks the log to tell the caller about the
+	 * next region that this machine should recover.
+	 *
+	 * Do not confuse this function with 'in_sync()', one
+	 * tells you if an area is synchronised, the other
+	 * assigns recovery work.
+	*/
+	int (*get_resync_work)(struct dm_dirty_log *log, region_t *region);
+
+	/*
+	 * This notifies the log that the resync status of a region
+	 * has changed.  It also clears the region from the recovering
+	 * list (if present).
+	 */
+	void (*set_region_sync)(struct dm_dirty_log *log,
+				region_t region, int in_sync);
+
+	/*
+	 * Returns the number of regions that are in sync.
+	 */
+	region_t (*get_sync_count)(struct dm_dirty_log *log);
+
+	/*
+	 * Support function for mirror status requests.
+	 */
+	int (*status)(struct dm_dirty_log *log, status_type_t status_type,
+		      char *result, unsigned maxlen);
+
+	/*
+	 * is_remote_recovering is necessary for cluster mirroring. It provides
+	 * a way to detect recovery on another node, so we aren't writing
+	 * concurrently.  This function is likely to block (when a cluster log
+	 * is used).
+	 *
+	 * Returns: 0, 1
+	 */
+	int (*is_remote_recovering)(struct dm_dirty_log *log, region_t region);
+};
+
+int dm_dirty_log_type_register(struct dm_dirty_log_type *type);
+int dm_dirty_log_type_unregister(struct dm_dirty_log_type *type);
+
+/*
+ * Make sure you use these two functions, rather than calling
+ * type->constructor/destructor() directly.
+ */
+struct dm_dirty_log *dm_dirty_log_create(const char *type_name,
+			struct dm_target *ti,
+			int (*flush_callback_fn)(struct dm_target *ti),
+			unsigned argc, char **argv);
+void dm_dirty_log_destroy(struct dm_dirty_log *log);
+
+#endif	/* __KERNEL__ */
+#endif	/* _LINUX_DM_DIRTY_LOG_H */
diff --git a/include/linux/dm-io.h b/include/linux/dm-io.h
new file mode 100644
index 00000000..f4b0aa31
--- /dev/null
+++ b/include/linux/dm-io.h
@@ -0,0 +1,84 @@
+/*
+ * Copyright (C) 2003 Sistina Software
+ * Copyright (C) 2004 - 2008 Red Hat, Inc. All rights reserved.
+ *
+ * Device-Mapper low-level I/O.
+ *
+ * This file is released under the GPL.
+ */
+
+#ifndef _LINUX_DM_IO_H
+#define _LINUX_DM_IO_H
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+
+struct dm_io_region {
+	struct block_device *bdev;
+	sector_t sector;
+	sector_t count;		/* If this is zero the region is ignored. */
+};
+
+struct page_list {
+	struct page_list *next;
+	struct page *page;
+};
+
+typedef void (*io_notify_fn)(unsigned long error, void *context);
+
+enum dm_io_mem_type {
+	DM_IO_PAGE_LIST,/* Page list */
+	DM_IO_BVEC,	/* Bio vector */
+	DM_IO_VMA,	/* Virtual memory area */
+	DM_IO_KMEM,	/* Kernel memory */
+};
+
+struct dm_io_memory {
+	enum dm_io_mem_type type;
+
+	unsigned offset;
+
+	union {
+		struct page_list *pl;
+		struct bio_vec *bvec;
+		void *vma;
+		void *addr;
+	} ptr;
+};
+
+struct dm_io_notify {
+	io_notify_fn fn;	/* Callback for asynchronous requests */
+	void *context;		/* Passed to callback */
+};
+
+/*
+ * IO request structure
+ */
+struct dm_io_client;
+struct dm_io_request {
+	int bi_rw;			/* READ|WRITE - not READA */
+	struct dm_io_memory mem;	/* Memory to use for io */
+	struct dm_io_notify notify;	/* Synchronous if notify.fn is NULL */
+	struct dm_io_client *client;	/* Client memory handler */
+};
+
+/*
+ * For async io calls, users can alternatively use the dm_io() function below
+ * and dm_io_client_create() to create private mempools for the client.
+ *
+ * Create/destroy may block.
+ */
+struct dm_io_client *dm_io_client_create(void);
+void dm_io_client_destroy(struct dm_io_client *client);
+
+/*
+ * IO interface using private per-client pools.
+ * Each bit in the optional 'sync_error_bits' bitset indicates whether an
+ * error occurred doing io to the corresponding region.
+ */
+int dm_io(struct dm_io_request *io_req, unsigned num_regions,
+	  struct dm_io_region *region, unsigned long *sync_error_bits);
+
+#endif	/* __KERNEL__ */
+#endif	/* _LINUX_DM_IO_H */
diff --git a/include/linux/dm-ioctl.h b/include/linux/dm-ioctl.h
new file mode 100644
index 00000000..75fd5573
--- /dev/null
+++ b/include/linux/dm-ioctl.h
@@ -0,0 +1,337 @@
+/*
+ * Copyright (C) 2001 - 2003 Sistina Software (UK) Limited.
+ * Copyright (C) 2004 - 2009 Red Hat, Inc. All rights reserved.
+ *
+ * This file is released under the LGPL.
+ */
+
+#ifndef _LINUX_DM_IOCTL_V4_H
+#define _LINUX_DM_IOCTL_V4_H
+
+#include <linux/types.h>
+
+#define DM_DIR "mapper"		/* Slashes not supported */
+#define DM_CONTROL_NODE "control"
+#define DM_MAX_TYPE_NAME 16
+#define DM_NAME_LEN 128
+#define DM_UUID_LEN 129
+
+/*
+ * A traditional ioctl interface for the device mapper.
+ *
+ * Each device can have two tables associated with it, an
+ * 'active' table which is the one currently used by io passing
+ * through the device, and an 'inactive' one which is a table
+ * that is being prepared as a replacement for the 'active' one.
+ *
+ * DM_VERSION:
+ * Just get the version information for the ioctl interface.
+ *
+ * DM_REMOVE_ALL:
+ * Remove all dm devices, destroy all tables.  Only really used
+ * for debug.
+ *
+ * DM_LIST_DEVICES:
+ * Get a list of all the dm device names.
+ *
+ * DM_DEV_CREATE:
+ * Create a new device, neither the 'active' or 'inactive' table
+ * slots will be filled.  The device will be in suspended state
+ * after creation, however any io to the device will get errored
+ * since it will be out-of-bounds.
+ *
+ * DM_DEV_REMOVE:
+ * Remove a device, destroy any tables.
+ *
+ * DM_DEV_RENAME:
+ * Rename a device or set its uuid if none was previously supplied.
+ *
+ * DM_SUSPEND:
+ * This performs both suspend and resume, depending which flag is
+ * passed in.
+ * Suspend: This command will not return until all pending io to
+ * the device has completed.  Further io will be deferred until
+ * the device is resumed.
+ * Resume: It is no longer an error to issue this command on an
+ * unsuspended device.  If a table is present in the 'inactive'
+ * slot, it will be moved to the active slot, then the old table
+ * from the active slot will be _destroyed_.  Finally the device
+ * is resumed.
+ *
+ * DM_DEV_STATUS:
+ * Retrieves the status for the table in the 'active' slot.
+ *
+ * DM_DEV_WAIT:
+ * Wait for a significant event to occur to the device.  This
+ * could either be caused by an event triggered by one of the
+ * targets of the table in the 'active' slot, or a table change.
+ *
+ * DM_TABLE_LOAD:
+ * Load a table into the 'inactive' slot for the device.  The
+ * device does _not_ need to be suspended prior to this command.
+ *
+ * DM_TABLE_CLEAR:
+ * Destroy any table in the 'inactive' slot (ie. abort).
+ *
+ * DM_TABLE_DEPS:
+ * Return a set of device dependencies for the 'active' table.
+ *
+ * DM_TABLE_STATUS:
+ * Return the targets status for the 'active' table.
+ *
+ * DM_TARGET_MSG:
+ * Pass a message string to the target at a specific offset of a device.
+ *
+ * DM_DEV_SET_GEOMETRY:
+ * Set the geometry of a device by passing in a string in this format:
+ *
+ * "cylinders heads sectors_per_track start_sector"
+ *
+ * Beware that CHS geometry is nearly obsolete and only provided
+ * for compatibility with dm devices that can be booted by a PC
+ * BIOS.  See struct hd_geometry for range limits.  Also note that
+ * the geometry is erased if the device size changes.
+ */
+
+/*
+ * All ioctl arguments consist of a single chunk of memory, with
+ * this structure at the start.  If a uuid is specified any
+ * lookup (eg. for a DM_INFO) will be done on that, *not* the
+ * name.
+ */
+struct dm_ioctl {
+	/*
+	 * The version number is made up of three parts:
+	 * major - no backward or forward compatibility,
+	 * minor - only backwards compatible,
+	 * patch - both backwards and forwards compatible.
+	 *
+	 * All clients of the ioctl interface should fill in the
+	 * version number of the interface that they were
+	 * compiled with.
+	 *
+	 * All recognised ioctl commands (ie. those that don't
+	 * return -ENOTTY) fill out this field, even if the
+	 * command failed.
+	 */
+	__u32 version[3];	/* in/out */
+	__u32 data_size;	/* total size of data passed in
+				 * including this struct */
+
+	__u32 data_start;	/* offset to start of data
+				 * relative to start of this struct */
+
+	__u32 target_count;	/* in/out */
+	__s32 open_count;	/* out */
+	__u32 flags;		/* in/out */
+
+	/*
+	 * event_nr holds either the event number (input and output) or the
+	 * udev cookie value (input only).
+	 * The DM_DEV_WAIT ioctl takes an event number as input.
+	 * The DM_SUSPEND, DM_DEV_REMOVE and DM_DEV_RENAME ioctls
+	 * use the field as a cookie to return in the DM_COOKIE
+	 * variable with the uevents they issue.
+	 * For output, the ioctls return the event number, not the cookie.
+	 */
+	__u32 event_nr;      	/* in/out */
+	__u32 padding;
+
+	__u64 dev;		/* in/out */
+
+	char name[DM_NAME_LEN];	/* device name */
+	char uuid[DM_UUID_LEN];	/* unique identifier for
+				 * the block device */
+	char data[7];		/* padding or data */
+};
+
+/*
+ * Used to specify tables.  These structures appear after the
+ * dm_ioctl.
+ */
+struct dm_target_spec {
+	__u64 sector_start;
+	__u64 length;
+	__s32 status;		/* used when reading from kernel only */
+
+	/*
+	 * Location of the next dm_target_spec.
+	 * - When specifying targets on a DM_TABLE_LOAD command, this value is
+	 *   the number of bytes from the start of the "current" dm_target_spec
+	 *   to the start of the "next" dm_target_spec.
+	 * - When retrieving targets on a DM_TABLE_STATUS command, this value
+	 *   is the number of bytes from the start of the first dm_target_spec
+	 *   (that follows the dm_ioctl struct) to the start of the "next"
+	 *   dm_target_spec.
+	 */
+	__u32 next;
+
+	char target_type[DM_MAX_TYPE_NAME];
+
+	/*
+	 * Parameter string starts immediately after this object.
+	 * Be careful to add padding after string to ensure correct
+	 * alignment of subsequent dm_target_spec.
+	 */
+};
+
+/*
+ * Used to retrieve the target dependencies.
+ */
+struct dm_target_deps {
+	__u32 count;	/* Array size */
+	__u32 padding;	/* unused */
+	__u64 dev[0];	/* out */
+};
+
+/*
+ * Used to get a list of all dm devices.
+ */
+struct dm_name_list {
+	__u64 dev;
+	__u32 next;		/* offset to the next record from
+				   the _start_ of this */
+	char name[0];
+};
+
+/*
+ * Used to retrieve the target versions
+ */
+struct dm_target_versions {
+        __u32 next;
+        __u32 version[3];
+
+        char name[0];
+};
+
+/*
+ * Used to pass message to a target
+ */
+struct dm_target_msg {
+	__u64 sector;	/* Device sector */
+
+	char message[0];
+};
+
+/*
+ * If you change this make sure you make the corresponding change
+ * to dm-ioctl.c:lookup_ioctl()
+ */
+enum {
+	/* Top level cmds */
+	DM_VERSION_CMD = 0,
+	DM_REMOVE_ALL_CMD,
+	DM_LIST_DEVICES_CMD,
+
+	/* device level cmds */
+	DM_DEV_CREATE_CMD,
+	DM_DEV_REMOVE_CMD,
+	DM_DEV_RENAME_CMD,
+	DM_DEV_SUSPEND_CMD,
+	DM_DEV_STATUS_CMD,
+	DM_DEV_WAIT_CMD,
+
+	/* Table level cmds */
+	DM_TABLE_LOAD_CMD,
+	DM_TABLE_CLEAR_CMD,
+	DM_TABLE_DEPS_CMD,
+	DM_TABLE_STATUS_CMD,
+
+	/* Added later */
+	DM_LIST_VERSIONS_CMD,
+	DM_TARGET_MSG_CMD,
+	DM_DEV_SET_GEOMETRY_CMD
+};
+
+#define DM_IOCTL 0xfd
+
+#define DM_VERSION       _IOWR(DM_IOCTL, DM_VERSION_CMD, struct dm_ioctl)
+#define DM_REMOVE_ALL    _IOWR(DM_IOCTL, DM_REMOVE_ALL_CMD, struct dm_ioctl)
+#define DM_LIST_DEVICES  _IOWR(DM_IOCTL, DM_LIST_DEVICES_CMD, struct dm_ioctl)
+
+#define DM_DEV_CREATE    _IOWR(DM_IOCTL, DM_DEV_CREATE_CMD, struct dm_ioctl)
+#define DM_DEV_REMOVE    _IOWR(DM_IOCTL, DM_DEV_REMOVE_CMD, struct dm_ioctl)
+#define DM_DEV_RENAME    _IOWR(DM_IOCTL, DM_DEV_RENAME_CMD, struct dm_ioctl)
+#define DM_DEV_SUSPEND   _IOWR(DM_IOCTL, DM_DEV_SUSPEND_CMD, struct dm_ioctl)
+#define DM_DEV_STATUS    _IOWR(DM_IOCTL, DM_DEV_STATUS_CMD, struct dm_ioctl)
+#define DM_DEV_WAIT      _IOWR(DM_IOCTL, DM_DEV_WAIT_CMD, struct dm_ioctl)
+
+#define DM_TABLE_LOAD    _IOWR(DM_IOCTL, DM_TABLE_LOAD_CMD, struct dm_ioctl)
+#define DM_TABLE_CLEAR   _IOWR(DM_IOCTL, DM_TABLE_CLEAR_CMD, struct dm_ioctl)
+#define DM_TABLE_DEPS    _IOWR(DM_IOCTL, DM_TABLE_DEPS_CMD, struct dm_ioctl)
+#define DM_TABLE_STATUS  _IOWR(DM_IOCTL, DM_TABLE_STATUS_CMD, struct dm_ioctl)
+
+#define DM_LIST_VERSIONS _IOWR(DM_IOCTL, DM_LIST_VERSIONS_CMD, struct dm_ioctl)
+
+#define DM_TARGET_MSG	 _IOWR(DM_IOCTL, DM_TARGET_MSG_CMD, struct dm_ioctl)
+#define DM_DEV_SET_GEOMETRY	_IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl)
+
+#define DM_VERSION_MAJOR	4
+#define DM_VERSION_MINOR	22
+#define DM_VERSION_PATCHLEVEL	0
+#define DM_VERSION_EXTRA	"-ioctl (2011-10-19)"
+
+/* Status bits */
+#define DM_READONLY_FLAG	(1 << 0) /* In/Out */
+#define DM_SUSPEND_FLAG		(1 << 1) /* In/Out */
+#define DM_PERSISTENT_DEV_FLAG	(1 << 3) /* In */
+
+/*
+ * Flag passed into ioctl STATUS command to get table information
+ * rather than current status.
+ */
+#define DM_STATUS_TABLE_FLAG	(1 << 4) /* In */
+
+/*
+ * Flags that indicate whether a table is present in either of
+ * the two table slots that a device has.
+ */
+#define DM_ACTIVE_PRESENT_FLAG   (1 << 5) /* Out */
+#define DM_INACTIVE_PRESENT_FLAG (1 << 6) /* Out */
+
+/*
+ * Indicates that the buffer passed in wasn't big enough for the
+ * results.
+ */
+#define DM_BUFFER_FULL_FLAG	(1 << 8) /* Out */
+
+/*
+ * This flag is now ignored.
+ */
+#define DM_SKIP_BDGET_FLAG	(1 << 9) /* In */
+
+/*
+ * Set this to avoid attempting to freeze any filesystem when suspending.
+ */
+#define DM_SKIP_LOCKFS_FLAG	(1 << 10) /* In */
+
+/*
+ * Set this to suspend without flushing queued ios.
+ */
+#define DM_NOFLUSH_FLAG		(1 << 11) /* In */
+
+/*
+ * If set, any table information returned will relate to the inactive
+ * table instead of the live one.  Always check DM_INACTIVE_PRESENT_FLAG
+ * is set before using the data returned.
+ */
+#define DM_QUERY_INACTIVE_TABLE_FLAG	(1 << 12) /* In */
+
+/*
+ * If set, a uevent was generated for which the caller may need to wait.
+ */
+#define DM_UEVENT_GENERATED_FLAG	(1 << 13) /* Out */
+
+/*
+ * If set, rename changes the uuid not the name.  Only permitted
+ * if no uuid was previously supplied: an existing uuid cannot be changed.
+ */
+#define DM_UUID_FLAG			(1 << 14) /* In */
+
+/*
+ * If set, all buffers are wiped after use. Use when sending
+ * or requesting sensitive data such as an encryption key.
+ */
+#define DM_SECURE_DATA_FLAG		(1 << 15) /* In */
+
+#endif				/* _LINUX_DM_IOCTL_H */
diff --git a/include/linux/dm-kcopyd.h b/include/linux/dm-kcopyd.h
new file mode 100644
index 00000000..47d9d376
--- /dev/null
+++ b/include/linux/dm-kcopyd.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2001 - 2003 Sistina Software
+ * Copyright (C) 2004 - 2008 Red Hat, Inc. All rights reserved.
+ *
+ * kcopyd provides a simple interface for copying an area of one
+ * block-device to one or more other block-devices, either synchronous
+ * or with an asynchronous completion notification.
+ *
+ * This file is released under the GPL.
+ */
+
+#ifndef _LINUX_DM_KCOPYD_H
+#define _LINUX_DM_KCOPYD_H
+
+#ifdef __KERNEL__
+
+#include <linux/dm-io.h>
+
+/* FIXME: make this configurable */
+#define DM_KCOPYD_MAX_REGIONS 8
+
+#define DM_KCOPYD_IGNORE_ERROR 1
+
+/*
+ * To use kcopyd you must first create a dm_kcopyd_client object.
+ */
+struct dm_kcopyd_client;
+struct dm_kcopyd_client *dm_kcopyd_client_create(void);
+void dm_kcopyd_client_destroy(struct dm_kcopyd_client *kc);
+
+/*
+ * Submit a copy job to kcopyd.  This is built on top of the
+ * previous three fns.
+ *
+ * read_err is a boolean,
+ * write_err is a bitset, with 1 bit for each destination region
+ */
+typedef void (*dm_kcopyd_notify_fn)(int read_err, unsigned long write_err,
+				    void *context);
+
+int dm_kcopyd_copy(struct dm_kcopyd_client *kc, struct dm_io_region *from,
+		   unsigned num_dests, struct dm_io_region *dests,
+		   unsigned flags, dm_kcopyd_notify_fn fn, void *context);
+
+/*
+ * Prepare a callback and submit it via the kcopyd thread.
+ *
+ * dm_kcopyd_prepare_callback allocates a callback structure and returns it.
+ * It must not be called from interrupt context.
+ * The returned value should be passed into dm_kcopyd_do_callback.
+ *
+ * dm_kcopyd_do_callback submits the callback.
+ * It may be called from interrupt context.
+ * The callback is issued from the kcopyd thread.
+ */
+void *dm_kcopyd_prepare_callback(struct dm_kcopyd_client *kc,
+				 dm_kcopyd_notify_fn fn, void *context);
+void dm_kcopyd_do_callback(void *job, int read_err, unsigned long write_err);
+
+int dm_kcopyd_zero(struct dm_kcopyd_client *kc,
+		   unsigned num_dests, struct dm_io_region *dests,
+		   unsigned flags, dm_kcopyd_notify_fn fn, void *context);
+
+#endif	/* __KERNEL__ */
+#endif	/* _LINUX_DM_KCOPYD_H */
diff --git a/include/linux/dm-log-userspace.h b/include/linux/dm-log-userspace.h
new file mode 100644
index 00000000..0678c2ad
--- /dev/null
+++ b/include/linux/dm-log-userspace.h
@@ -0,0 +1,416 @@
+/*
+ * Copyright (C) 2006-2009 Red Hat, Inc.
+ *
+ * This file is released under the LGPL.
+ */
+
+#ifndef __DM_LOG_USERSPACE_H__
+#define __DM_LOG_USERSPACE_H__
+
+#include <linux/dm-ioctl.h> /* For DM_UUID_LEN */
+
+/*
+ * The device-mapper userspace log module consists of a kernel component and
+ * a user-space component.  The kernel component implements the API defined
+ * in dm-dirty-log.h.  Its purpose is simply to pass the parameters and
+ * return values of those API functions between kernel and user-space.
+ *
+ * Below are defined the 'request_types' - DM_ULOG_CTR, DM_ULOG_DTR, etc.
+ * These request types represent the different functions in the device-mapper
+ * dirty log API.  Each of these is described in more detail below.
+ *
+ * The user-space program must listen for requests from the kernel (representing
+ * the various API functions) and process them.
+ *
+ * User-space begins by setting up the communication link (error checking
+ * removed for clarity):
+ *	fd = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
+ *	addr.nl_family = AF_NETLINK;
+ *	addr.nl_groups = CN_IDX_DM;
+ *	addr.nl_pid = 0;
+ *	r = bind(fd, (struct sockaddr *) &addr, sizeof(addr));
+ *	opt = addr.nl_groups;
+ *	setsockopt(fd, SOL_NETLINK, NETLINK_ADD_MEMBERSHIP, &opt, sizeof(opt));
+ *
+ * User-space will then wait to receive requests form the kernel, which it
+ * will process as described below.  The requests are received in the form,
+ * ((struct dm_ulog_request) + (additional data)).  Depending on the request
+ * type, there may or may not be 'additional data'.  In the descriptions below,
+ * you will see 'Payload-to-userspace' and 'Payload-to-kernel'.  The
+ * 'Payload-to-userspace' is what the kernel sends in 'additional data' as
+ * necessary parameters to complete the request.  The 'Payload-to-kernel' is
+ * the 'additional data' returned to the kernel that contains the necessary
+ * results of the request.  The 'data_size' field in the dm_ulog_request
+ * structure denotes the availability and amount of payload data.
+ */
+
+/*
+ * DM_ULOG_CTR corresponds to (found in dm-dirty-log.h):
+ * int (*ctr)(struct dm_dirty_log *log, struct dm_target *ti,
+ *	      unsigned argc, char **argv);
+ *
+ * Payload-to-userspace:
+ *	A single string containing all the argv arguments separated by ' 's
+ * Payload-to-kernel:
+ *	A NUL-terminated string that is the name of the device that is used
+ *	as the backing store for the log data.  'dm_get_device' will be called
+ *	on this device.  ('dm_put_device' will be called on this device
+ *	automatically after calling DM_ULOG_DTR.)  If there is no device needed
+ *	for log data, 'data_size' in the dm_ulog_request struct should be 0.
+ *
+ * The UUID contained in the dm_ulog_request structure is the reference that
+ * will be used by all request types to a specific log.  The constructor must
+ * record this association with the instance created.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field, filling the
+ * data field with the log device if necessary, and setting 'data_size'
+ * appropriately.
+ */
+#define DM_ULOG_CTR                    1
+
+/*
+ * DM_ULOG_DTR corresponds to (found in dm-dirty-log.h):
+ * void (*dtr)(struct dm_dirty_log *log);
+ *
+ * Payload-to-userspace:
+ *	A single string containing all the argv arguments separated by ' 's
+ * Payload-to-kernel:
+ *	None.  ('data_size' in the dm_ulog_request struct should be 0.)
+ *
+ * The UUID contained in the dm_ulog_request structure is all that is
+ * necessary to identify the log instance being destroyed.  There is no
+ * payload data.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and clearing
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_DTR                    2
+
+/*
+ * DM_ULOG_PRESUSPEND corresponds to (found in dm-dirty-log.h):
+ * int (*presuspend)(struct dm_dirty_log *log);
+ *
+ * Payload-to-userspace:
+ *	None.
+ * Payload-to-kernel:
+ *	None.
+ *
+ * The UUID contained in the dm_ulog_request structure is all that is
+ * necessary to identify the log instance being presuspended.  There is no
+ * payload data.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_PRESUSPEND             3
+
+/*
+ * DM_ULOG_POSTSUSPEND corresponds to (found in dm-dirty-log.h):
+ * int (*postsuspend)(struct dm_dirty_log *log);
+ *
+ * Payload-to-userspace:
+ *	None.
+ * Payload-to-kernel:
+ *	None.
+ *
+ * The UUID contained in the dm_ulog_request structure is all that is
+ * necessary to identify the log instance being postsuspended.  There is no
+ * payload data.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_POSTSUSPEND            4
+
+/*
+ * DM_ULOG_RESUME corresponds to (found in dm-dirty-log.h):
+ * int (*resume)(struct dm_dirty_log *log);
+ *
+ * Payload-to-userspace:
+ *	None.
+ * Payload-to-kernel:
+ *	None.
+ *
+ * The UUID contained in the dm_ulog_request structure is all that is
+ * necessary to identify the log instance being resumed.  There is no
+ * payload data.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_RESUME                 5
+
+/*
+ * DM_ULOG_GET_REGION_SIZE corresponds to (found in dm-dirty-log.h):
+ * uint32_t (*get_region_size)(struct dm_dirty_log *log);
+ *
+ * Payload-to-userspace:
+ *	None.
+ * Payload-to-kernel:
+ *	uint64_t - contains the region size
+ *
+ * The region size is something that was determined at constructor time.
+ * It is returned in the payload area and 'data_size' is set to
+ * reflect this.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field appropriately.
+ */
+#define DM_ULOG_GET_REGION_SIZE        6
+
+/*
+ * DM_ULOG_IS_CLEAN corresponds to (found in dm-dirty-log.h):
+ * int (*is_clean)(struct dm_dirty_log *log, region_t region);
+ *
+ * Payload-to-userspace:
+ *	uint64_t - the region to get clean status on
+ * Payload-to-kernel:
+ *	int64_t  - 1 if clean, 0 otherwise
+ *
+ * Payload is sizeof(uint64_t) and contains the region for which the clean
+ * status is being made.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - filling the payload with 0 (not clean) or
+ * 1 (clean), setting 'data_size' and 'error' appropriately.
+ */
+#define DM_ULOG_IS_CLEAN               7
+
+/*
+ * DM_ULOG_IN_SYNC corresponds to (found in dm-dirty-log.h):
+ * int (*in_sync)(struct dm_dirty_log *log, region_t region,
+ *		  int can_block);
+ *
+ * Payload-to-userspace:
+ *	uint64_t - the region to get sync status on
+ * Payload-to-kernel:
+ *	int64_t - 1 if in-sync, 0 otherwise
+ *
+ * Exactly the same as 'is_clean' above, except this time asking "has the
+ * region been recovered?" vs. "is the region not being modified?"
+ */
+#define DM_ULOG_IN_SYNC                8
+
+/*
+ * DM_ULOG_FLUSH corresponds to (found in dm-dirty-log.h):
+ * int (*flush)(struct dm_dirty_log *log);
+ *
+ * Payload-to-userspace:
+ *	None.
+ * Payload-to-kernel:
+ *	None.
+ *
+ * No incoming or outgoing payload.  Simply flush log state to disk.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and clearing
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_FLUSH                  9
+
+/*
+ * DM_ULOG_MARK_REGION corresponds to (found in dm-dirty-log.h):
+ * void (*mark_region)(struct dm_dirty_log *log, region_t region);
+ *
+ * Payload-to-userspace:
+ *	uint64_t [] - region(s) to mark
+ * Payload-to-kernel:
+ *	None.
+ *
+ * Incoming payload contains the one or more regions to mark dirty.
+ * The number of regions contained in the payload can be determined from
+ * 'data_size/sizeof(uint64_t)'.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and clearing
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_MARK_REGION           10
+
+/*
+ * DM_ULOG_CLEAR_REGION corresponds to (found in dm-dirty-log.h):
+ * void (*clear_region)(struct dm_dirty_log *log, region_t region);
+ *
+ * Payload-to-userspace:
+ *	uint64_t [] - region(s) to clear
+ * Payload-to-kernel:
+ *	None.
+ *
+ * Incoming payload contains the one or more regions to mark clean.
+ * The number of regions contained in the payload can be determined from
+ * 'data_size/sizeof(uint64_t)'.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and clearing
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_CLEAR_REGION          11
+
+/*
+ * DM_ULOG_GET_RESYNC_WORK corresponds to (found in dm-dirty-log.h):
+ * int (*get_resync_work)(struct dm_dirty_log *log, region_t *region);
+ *
+ * Payload-to-userspace:
+ *	None.
+ * Payload-to-kernel:
+ *	{
+ *		int64_t i; -- 1 if recovery necessary, 0 otherwise
+ *		uint64_t r; -- The region to recover if i=1
+ *	}
+ * 'data_size' should be set appropriately.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field appropriately.
+ */
+#define DM_ULOG_GET_RESYNC_WORK       12
+
+/*
+ * DM_ULOG_SET_REGION_SYNC corresponds to (found in dm-dirty-log.h):
+ * void (*set_region_sync)(struct dm_dirty_log *log,
+ *			   region_t region, int in_sync);
+ *
+ * Payload-to-userspace:
+ *	{
+ *		uint64_t - region to set sync state on
+ *		int64_t  - 0 if not-in-sync, 1 if in-sync
+ *	}
+ * Payload-to-kernel:
+ *	None.
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and clearing
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_SET_REGION_SYNC       13
+
+/*
+ * DM_ULOG_GET_SYNC_COUNT corresponds to (found in dm-dirty-log.h):
+ * region_t (*get_sync_count)(struct dm_dirty_log *log);
+ *
+ * Payload-to-userspace:
+ *	None.
+ * Payload-to-kernel:
+ *	uint64_t - the number of in-sync regions
+ *
+ * No incoming payload.  Kernel-bound payload contains the number of
+ * regions that are in-sync (in a size_t).
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_GET_SYNC_COUNT        14
+
+/*
+ * DM_ULOG_STATUS_INFO corresponds to (found in dm-dirty-log.h):
+ * int (*status)(struct dm_dirty_log *log, STATUSTYPE_INFO,
+ *		 char *result, unsigned maxlen);
+ *
+ * Payload-to-userspace:
+ *	None.
+ * Payload-to-kernel:
+ *	Character string containing STATUSTYPE_INFO
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_STATUS_INFO           15
+
+/*
+ * DM_ULOG_STATUS_TABLE corresponds to (found in dm-dirty-log.h):
+ * int (*status)(struct dm_dirty_log *log, STATUSTYPE_TABLE,
+ *		 char *result, unsigned maxlen);
+ *
+ * Payload-to-userspace:
+ *	None.
+ * Payload-to-kernel:
+ *	Character string containing STATUSTYPE_TABLE
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_STATUS_TABLE          16
+
+/*
+ * DM_ULOG_IS_REMOTE_RECOVERING corresponds to (found in dm-dirty-log.h):
+ * int (*is_remote_recovering)(struct dm_dirty_log *log, region_t region);
+ *
+ * Payload-to-userspace:
+ *	uint64_t - region to determine recovery status on
+ * Payload-to-kernel:
+ *	{
+ *		int64_t is_recovering;  -- 0 if no, 1 if yes
+ *		uint64_t in_sync_hint;  -- lowest region still needing resync
+ *	}
+ *
+ * When the request has been processed, user-space must return the
+ * dm_ulog_request to the kernel - setting the 'error' field and
+ * 'data_size' appropriately.
+ */
+#define DM_ULOG_IS_REMOTE_RECOVERING  17
+
+/*
+ * (DM_ULOG_REQUEST_MASK & request_type) to get the request type
+ *
+ * Payload-to-userspace:
+ *	A single string containing all the argv arguments separated by ' 's
+ * Payload-to-kernel:
+ *	None.  ('data_size' in the dm_ulog_request struct should be 0.)
+ *
+ * We are reserving 8 bits of the 32-bit 'request_type' field for the
+ * various request types above.  The remaining 24-bits are currently
+ * set to zero and are reserved for future use and compatibility concerns.
+ *
+ * User-space should always use DM_ULOG_REQUEST_TYPE to acquire the
+ * request type from the 'request_type' field to maintain forward compatibility.
+ */
+#define DM_ULOG_REQUEST_MASK 0xFF
+#define DM_ULOG_REQUEST_TYPE(request_type) \
+	(DM_ULOG_REQUEST_MASK & (request_type))
+
+/*
+ * DM_ULOG_REQUEST_VERSION is incremented when there is a
+ * change to the way information is passed between kernel
+ * and userspace.  This could be a structure change of
+ * dm_ulog_request or a change in the way requests are
+ * issued/handled.  Changes are outlined here:
+ *	version 1:  Initial implementation
+ *	version 2:  DM_ULOG_CTR allowed to return a string containing a
+ *	            device name that is to be registered with DM via
+ *	            'dm_get_device'.
+ */
+#define DM_ULOG_REQUEST_VERSION 2
+
+struct dm_ulog_request {
+	/*
+	 * The local unique identifier (luid) and the universally unique
+	 * identifier (uuid) are used to tie a request to a specific
+	 * mirror log.  A single machine log could probably make due with
+	 * just the 'luid', but a cluster-aware log must use the 'uuid' and
+	 * the 'luid'.  The uuid is what is required for node to node
+	 * communication concerning a particular log, but the 'luid' helps
+	 * differentiate between logs that are being swapped and have the
+	 * same 'uuid'.  (Think "live" and "inactive" device-mapper tables.)
+	 */
+	uint64_t luid;
+	char uuid[DM_UUID_LEN];
+	char padding[3];        /* Padding because DM_UUID_LEN = 129 */
+
+	uint32_t version;       /* See DM_ULOG_REQUEST_VERSION */
+	int32_t error;          /* Used to report back processing errors */
+
+	uint32_t seq;           /* Sequence number for request */
+	uint32_t request_type;  /* DM_ULOG_* defined above */
+	uint32_t data_size;     /* How much data (not including this struct) */
+
+	char data[0];
+};
+
+#endif /* __DM_LOG_USERSPACE_H__ */
diff --git a/include/linux/dm-region-hash.h b/include/linux/dm-region-hash.h
new file mode 100644
index 00000000..9e2a7a40
--- /dev/null
+++ b/include/linux/dm-region-hash.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2003 Sistina Software Limited.
+ * Copyright (C) 2004-2008 Red Hat, Inc. All rights reserved.
+ *
+ * Device-Mapper dirty region hash interface.
+ *
+ * This file is released under the GPL.
+ */
+
+#ifndef DM_REGION_HASH_H
+#define DM_REGION_HASH_H
+
+#include <linux/dm-dirty-log.h>
+
+/*-----------------------------------------------------------------
+ * Region hash
+ *----------------------------------------------------------------*/
+struct dm_region_hash;
+struct dm_region;
+
+/*
+ * States a region can have.
+ */
+enum dm_rh_region_states {
+	DM_RH_CLEAN	 = 0x01,	/* No writes in flight. */
+	DM_RH_DIRTY	 = 0x02,	/* Writes in flight. */
+	DM_RH_NOSYNC	 = 0x04,	/* Out of sync. */
+	DM_RH_RECOVERING = 0x08,	/* Under resynchronization. */
+};
+
+/*
+ * Region hash create/destroy.
+ */
+struct bio_list;
+struct dm_region_hash *dm_region_hash_create(
+		void *context, void (*dispatch_bios)(void *context,
+						     struct bio_list *bios),
+		void (*wakeup_workers)(void *context),
+		void (*wakeup_all_recovery_waiters)(void *context),
+		sector_t target_begin, unsigned max_recovery,
+		struct dm_dirty_log *log, uint32_t region_size,
+		region_t nr_regions);
+void dm_region_hash_destroy(struct dm_region_hash *rh);
+
+struct dm_dirty_log *dm_rh_dirty_log(struct dm_region_hash *rh);
+
+/*
+ * Conversion functions.
+ */
+region_t dm_rh_bio_to_region(struct dm_region_hash *rh, struct bio *bio);
+sector_t dm_rh_region_to_sector(struct dm_region_hash *rh, region_t region);
+void *dm_rh_region_context(struct dm_region *reg);
+
+/*
+ * Get region size and key (ie. number of the region).
+ */
+sector_t dm_rh_get_region_size(struct dm_region_hash *rh);
+region_t dm_rh_get_region_key(struct dm_region *reg);
+
+/*
+ * Get/set/update region state (and dirty log).
+ *
+ */
+int dm_rh_get_state(struct dm_region_hash *rh, region_t region, int may_block);
+void dm_rh_set_state(struct dm_region_hash *rh, region_t region,
+		     enum dm_rh_region_states state, int may_block);
+
+/* Non-zero errors_handled leaves the state of the region NOSYNC */
+void dm_rh_update_states(struct dm_region_hash *rh, int errors_handled);
+
+/* Flush the region hash and dirty log. */
+int dm_rh_flush(struct dm_region_hash *rh);
+
+/* Inc/dec pending count on regions. */
+void dm_rh_inc_pending(struct dm_region_hash *rh, struct bio_list *bios);
+void dm_rh_dec(struct dm_region_hash *rh, region_t region);
+
+/* Delay bios on regions. */
+void dm_rh_delay(struct dm_region_hash *rh, struct bio *bio);
+
+void dm_rh_mark_nosync(struct dm_region_hash *rh, struct bio *bio);
+
+/*
+ * Region recovery control.
+ */
+
+/* Prepare some regions for recovery by starting to quiesce them. */
+void dm_rh_recovery_prepare(struct dm_region_hash *rh);
+
+/* Try fetching a quiesced region for recovery. */
+struct dm_region *dm_rh_recovery_start(struct dm_region_hash *rh);
+
+/* Report recovery end on a region. */
+void dm_rh_recovery_end(struct dm_region *reg, int error);
+
+/* Returns number of regions with recovery work outstanding. */
+int dm_rh_recovery_in_flight(struct dm_region_hash *rh);
+
+/* Start/stop recovery. */
+void dm_rh_start_recovery(struct dm_region_hash *rh);
+void dm_rh_stop_recovery(struct dm_region_hash *rh);
+
+#endif /* DM_REGION_HASH_H */
diff --git a/include/linux/dm9000.h b/include/linux/dm9000.h
new file mode 100644
index 00000000..96e87693
--- /dev/null
+++ b/include/linux/dm9000.h
@@ -0,0 +1,40 @@
+/* include/linux/dm9000.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *   Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for dm9000 platform data
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#ifndef __DM9000_PLATFORM_DATA
+#define __DM9000_PLATFORM_DATA __FILE__
+
+/* IO control flags */
+
+#define DM9000_PLATF_8BITONLY	(0x0001)
+#define DM9000_PLATF_16BITONLY	(0x0002)
+#define DM9000_PLATF_32BITONLY	(0x0004)
+#define DM9000_PLATF_EXT_PHY	(0x0008)
+#define DM9000_PLATF_NO_EEPROM	(0x0010)
+#define DM9000_PLATF_SIMPLE_PHY (0x0020)  /* Use NSR to find LinkStatus */
+
+/* platform data for platform device structure's platform_data field */
+
+struct dm9000_plat_data {
+	unsigned int	flags;
+	unsigned char	dev_addr[6];
+
+	/* allow replacement IO routines */
+
+	void	(*inblk)(void __iomem *reg, void *data, int len);
+	void	(*outblk)(void __iomem *reg, void *data, int len);
+	void	(*dumpblk)(void __iomem *reg, int len);
+};
+
+#endif /* __DM9000_PLATFORM_DATA */
+
diff --git a/include/linux/dma-attrs.h b/include/linux/dma-attrs.h
new file mode 100644
index 00000000..547ab568
--- /dev/null
+++ b/include/linux/dma-attrs.h
@@ -0,0 +1,77 @@
+#ifndef _DMA_ATTR_H
+#define _DMA_ATTR_H
+
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/bug.h>
+
+/**
+ * an enum dma_attr represents an attribute associated with a DMA
+ * mapping. The semantics of each attribute should be defined in
+ * Documentation/DMA-attributes.txt.
+ */
+enum dma_attr {
+	DMA_ATTR_WRITE_BARRIER,
+	DMA_ATTR_WEAK_ORDERING,
+	DMA_ATTR_WRITE_COMBINE,
+	DMA_ATTR_NON_CONSISTENT,
+	DMA_ATTR_MAX,
+};
+
+#define __DMA_ATTRS_LONGS BITS_TO_LONGS(DMA_ATTR_MAX)
+
+/**
+ * struct dma_attrs - an opaque container for DMA attributes
+ * @flags - bitmask representing a collection of enum dma_attr
+ */
+struct dma_attrs {
+	unsigned long flags[__DMA_ATTRS_LONGS];
+};
+
+#define DEFINE_DMA_ATTRS(x) 					\
+	struct dma_attrs x = {					\
+		.flags = { [0 ... __DMA_ATTRS_LONGS-1] = 0 },	\
+	}
+
+static inline void init_dma_attrs(struct dma_attrs *attrs)
+{
+	bitmap_zero(attrs->flags, __DMA_ATTRS_LONGS);
+}
+
+#ifdef CONFIG_HAVE_DMA_ATTRS
+/**
+ * dma_set_attr - set a specific attribute
+ * @attr: attribute to set
+ * @attrs: struct dma_attrs (may be NULL)
+ */
+static inline void dma_set_attr(enum dma_attr attr, struct dma_attrs *attrs)
+{
+	if (attrs == NULL)
+		return;
+	BUG_ON(attr >= DMA_ATTR_MAX);
+	__set_bit(attr, attrs->flags);
+}
+
+/**
+ * dma_get_attr - check for a specific attribute
+ * @attr: attribute to set
+ * @attrs: struct dma_attrs (may be NULL)
+ */
+static inline int dma_get_attr(enum dma_attr attr, struct dma_attrs *attrs)
+{
+	if (attrs == NULL)
+		return 0;
+	BUG_ON(attr >= DMA_ATTR_MAX);
+	return test_bit(attr, attrs->flags);
+}
+#else /* !CONFIG_HAVE_DMA_ATTRS */
+static inline void dma_set_attr(enum dma_attr attr, struct dma_attrs *attrs)
+{
+}
+
+static inline int dma_get_attr(enum dma_attr attr, struct dma_attrs *attrs)
+{
+	return 0;
+}
+#endif /* CONFIG_HAVE_DMA_ATTRS */
+#endif /* _DMA_ATTR_H */
diff --git a/include/linux/dma-buf.h b/include/linux/dma-buf.h
new file mode 100644
index 00000000..1f78d159
--- /dev/null
+++ b/include/linux/dma-buf.h
@@ -0,0 +1,269 @@
+/*
+ * Header file for dma buffer sharing framework.
+ *
+ * Copyright(C) 2011 Linaro Limited. All rights reserved.
+ * Author: Sumit Semwal <sumit.semwal@ti.com>
+ *
+ * Many thanks to linaro-mm-sig list, and specially
+ * Arnd Bergmann <arnd@arndb.de>, Rob Clark <rob@ti.com> and
+ * Daniel Vetter <daniel@ffwll.ch> for their support in creation and
+ * refining of this idea.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __DMA_BUF_H__
+#define __DMA_BUF_H__
+
+#include <linux/file.h>
+#include <linux/err.h>
+#include <linux/scatterlist.h>
+#include <linux/list.h>
+#include <linux/dma-mapping.h>
+#include <linux/fs.h>
+
+struct device;
+struct dma_buf;
+struct dma_buf_attachment;
+
+/**
+ * struct dma_buf_ops - operations possible on struct dma_buf
+ * @attach: [optional] allows different devices to 'attach' themselves to the
+ *	    given buffer. It might return -EBUSY to signal that backing storage
+ *	    is already allocated and incompatible with the requirements
+ *	    of requesting device.
+ * @detach: [optional] detach a given device from this buffer.
+ * @map_dma_buf: returns list of scatter pages allocated, increases usecount
+ *		 of the buffer. Requires atleast one attach to be called
+ *		 before. Returned sg list should already be mapped into
+ *		 _device_ address space. This call may sleep. May also return
+ *		 -EINTR. Should return -EINVAL if attach hasn't been called yet.
+ * @unmap_dma_buf: decreases usecount of buffer, might deallocate scatter
+ *		   pages.
+ * @release: release this buffer; to be called after the last dma_buf_put.
+ * @begin_cpu_access: [optional] called before cpu access to invalidate cpu
+ * 		      caches and allocate backing storage (if not yet done)
+ * 		      respectively pin the objet into memory.
+ * @end_cpu_access: [optional] called after cpu access to flush cashes.
+ * @kmap_atomic: maps a page from the buffer into kernel address
+ * 		 space, users may not block until the subsequent unmap call.
+ * 		 This callback must not sleep.
+ * @kunmap_atomic: [optional] unmaps a atomically mapped page from the buffer.
+ * 		   This Callback must not sleep.
+ * @kmap: maps a page from the buffer into kernel address space.
+ * @kunmap: [optional] unmaps a page from the buffer.
+ * @mmap: used to expose the backing storage to userspace. Note that the
+ * 	  mapping needs to be coherent - if the exporter doesn't directly
+ * 	  support this, it needs to fake coherency by shooting down any ptes
+ * 	  when transitioning away from the cpu domain.
+ */
+struct dma_buf_ops {
+	int (*attach)(struct dma_buf *, struct device *,
+			struct dma_buf_attachment *);
+
+	void (*detach)(struct dma_buf *, struct dma_buf_attachment *);
+
+	/* For {map,unmap}_dma_buf below, any specific buffer attributes
+	 * required should get added to device_dma_parameters accessible
+	 * via dev->dma_params.
+	 */
+	struct sg_table * (*map_dma_buf)(struct dma_buf_attachment *,
+						enum dma_data_direction);
+	void (*unmap_dma_buf)(struct dma_buf_attachment *,
+						struct sg_table *,
+						enum dma_data_direction);
+	/* TODO: Add try_map_dma_buf version, to return immed with -EBUSY
+	 * if the call would block.
+	 */
+
+	/* after final dma_buf_put() */
+	void (*release)(struct dma_buf *);
+
+	int (*begin_cpu_access)(struct dma_buf *, size_t, size_t,
+				enum dma_data_direction);
+	void (*end_cpu_access)(struct dma_buf *, size_t, size_t,
+			       enum dma_data_direction);
+	void *(*kmap_atomic)(struct dma_buf *, unsigned long);
+	void (*kunmap_atomic)(struct dma_buf *, unsigned long, void *);
+	void *(*kmap)(struct dma_buf *, unsigned long);
+	void (*kunmap)(struct dma_buf *, unsigned long, void *);
+
+	int (*mmap)(struct dma_buf *, struct vm_area_struct *vma);
+};
+
+/**
+ * struct dma_buf - shared buffer object
+ * @size: size of the buffer
+ * @file: file pointer used for sharing buffers across, and for refcounting.
+ * @attachments: list of dma_buf_attachment that denotes all devices attached.
+ * @ops: dma_buf_ops associated with this buffer object.
+ * @priv: exporter specific private data for this buffer object.
+ */
+struct dma_buf {
+	size_t size;
+	struct file *file;
+	struct list_head attachments;
+	const struct dma_buf_ops *ops;
+	/* mutex to serialize list manipulation and attach/detach */
+	struct mutex lock;
+	void *priv;
+};
+
+/**
+ * struct dma_buf_attachment - holds device-buffer attachment data
+ * @dmabuf: buffer for this attachment.
+ * @dev: device attached to the buffer.
+ * @node: list of dma_buf_attachment.
+ * @priv: exporter specific attachment data.
+ *
+ * This structure holds the attachment information between the dma_buf buffer
+ * and its user device(s). The list contains one attachment struct per device
+ * attached to the buffer.
+ */
+struct dma_buf_attachment {
+	struct dma_buf *dmabuf;
+	struct device *dev;
+	struct list_head node;
+	void *priv;
+};
+
+/**
+ * get_dma_buf - convenience wrapper for get_file.
+ * @dmabuf:	[in]	pointer to dma_buf
+ *
+ * Increments the reference count on the dma-buf, needed in case of drivers
+ * that either need to create additional references to the dmabuf on the
+ * kernel side.  For example, an exporter that needs to keep a dmabuf ptr
+ * so that subsequent exports don't create a new dmabuf.
+ */
+static inline void get_dma_buf(struct dma_buf *dmabuf)
+{
+	get_file(dmabuf->file);
+}
+
+#ifdef CONFIG_DMA_SHARED_BUFFER
+struct dma_buf_attachment *dma_buf_attach(struct dma_buf *dmabuf,
+							struct device *dev);
+void dma_buf_detach(struct dma_buf *dmabuf,
+				struct dma_buf_attachment *dmabuf_attach);
+struct dma_buf *dma_buf_export(void *priv, const struct dma_buf_ops *ops,
+			       size_t size, int flags);
+int dma_buf_fd(struct dma_buf *dmabuf, int flags);
+struct dma_buf *dma_buf_get(int fd);
+void dma_buf_put(struct dma_buf *dmabuf);
+
+struct sg_table *dma_buf_map_attachment(struct dma_buf_attachment *,
+					enum dma_data_direction);
+void dma_buf_unmap_attachment(struct dma_buf_attachment *, struct sg_table *,
+				enum dma_data_direction);
+int dma_buf_begin_cpu_access(struct dma_buf *dma_buf, size_t start, size_t len,
+			     enum dma_data_direction dir);
+void dma_buf_end_cpu_access(struct dma_buf *dma_buf, size_t start, size_t len,
+			    enum dma_data_direction dir);
+void *dma_buf_kmap_atomic(struct dma_buf *, unsigned long);
+void dma_buf_kunmap_atomic(struct dma_buf *, unsigned long, void *);
+void *dma_buf_kmap(struct dma_buf *, unsigned long);
+void dma_buf_kunmap(struct dma_buf *, unsigned long, void *);
+
+int dma_buf_mmap(struct dma_buf *, struct vm_area_struct *,
+		 unsigned long);
+#else
+
+static inline struct dma_buf_attachment *dma_buf_attach(struct dma_buf *dmabuf,
+							struct device *dev)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline void dma_buf_detach(struct dma_buf *dmabuf,
+				  struct dma_buf_attachment *dmabuf_attach)
+{
+	return;
+}
+
+static inline struct dma_buf *dma_buf_export(void *priv,
+					     const struct dma_buf_ops *ops,
+					     size_t size, int flags)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline int dma_buf_fd(struct dma_buf *dmabuf, int flags)
+{
+	return -ENODEV;
+}
+
+static inline struct dma_buf *dma_buf_get(int fd)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline void dma_buf_put(struct dma_buf *dmabuf)
+{
+	return;
+}
+
+static inline struct sg_table *dma_buf_map_attachment(
+	struct dma_buf_attachment *attach, enum dma_data_direction write)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline void dma_buf_unmap_attachment(struct dma_buf_attachment *attach,
+			struct sg_table *sg, enum dma_data_direction dir)
+{
+	return;
+}
+
+static inline int dma_buf_begin_cpu_access(struct dma_buf *dmabuf,
+					   size_t start, size_t len,
+					   enum dma_data_direction dir)
+{
+	return -ENODEV;
+}
+
+static inline void dma_buf_end_cpu_access(struct dma_buf *dmabuf,
+					  size_t start, size_t len,
+					  enum dma_data_direction dir)
+{
+}
+
+static inline void *dma_buf_kmap_atomic(struct dma_buf *dmabuf,
+					unsigned long pnum)
+{
+	return NULL;
+}
+
+static inline void dma_buf_kunmap_atomic(struct dma_buf *dmabuf,
+					 unsigned long pnum, void *vaddr)
+{
+}
+
+static inline void *dma_buf_kmap(struct dma_buf *dmabuf, unsigned long pnum)
+{
+	return NULL;
+}
+
+static inline void dma_buf_kunmap(struct dma_buf *dmabuf,
+				  unsigned long pnum, void *vaddr)
+{
+}
+
+static inline int dma_buf_mmap(struct dma_buf *dmabuf,
+			       struct vm_area_struct *vma,
+			       unsigned long pgoff)
+{
+	return -ENODEV;
+}
+#endif /* CONFIG_DMA_SHARED_BUFFER */
+
+#endif /* __DMA_BUF_H__ */
diff --git a/include/linux/dma-debug.h b/include/linux/dma-debug.h
new file mode 100644
index 00000000..171ad8ae
--- /dev/null
+++ b/include/linux/dma-debug.h
@@ -0,0 +1,181 @@
+/*
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * Author: Joerg Roedel <joerg.roedel@amd.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef __DMA_DEBUG_H
+#define __DMA_DEBUG_H
+
+#include <linux/types.h>
+
+struct device;
+struct scatterlist;
+struct bus_type;
+
+#ifdef CONFIG_DMA_API_DEBUG
+
+extern void dma_debug_add_bus(struct bus_type *bus);
+
+extern void dma_debug_init(u32 num_entries);
+
+extern int dma_debug_resize_entries(u32 num_entries);
+
+extern void debug_dma_map_page(struct device *dev, struct page *page,
+			       size_t offset, size_t size,
+			       int direction, dma_addr_t dma_addr,
+			       bool map_single);
+
+extern void debug_dma_unmap_page(struct device *dev, dma_addr_t addr,
+				 size_t size, int direction, bool map_single);
+
+extern void debug_dma_map_sg(struct device *dev, struct scatterlist *sg,
+			     int nents, int mapped_ents, int direction);
+
+extern void debug_dma_unmap_sg(struct device *dev, struct scatterlist *sglist,
+			       int nelems, int dir);
+
+extern void debug_dma_alloc_coherent(struct device *dev, size_t size,
+				     dma_addr_t dma_addr, void *virt);
+
+extern void debug_dma_free_coherent(struct device *dev, size_t size,
+				    void *virt, dma_addr_t addr);
+
+extern void debug_dma_sync_single_for_cpu(struct device *dev,
+					  dma_addr_t dma_handle, size_t size,
+					  int direction);
+
+extern void debug_dma_sync_single_for_device(struct device *dev,
+					     dma_addr_t dma_handle,
+					     size_t size, int direction);
+
+extern void debug_dma_sync_single_range_for_cpu(struct device *dev,
+						dma_addr_t dma_handle,
+						unsigned long offset,
+						size_t size,
+						int direction);
+
+extern void debug_dma_sync_single_range_for_device(struct device *dev,
+						   dma_addr_t dma_handle,
+						   unsigned long offset,
+						   size_t size, int direction);
+
+extern void debug_dma_sync_sg_for_cpu(struct device *dev,
+				      struct scatterlist *sg,
+				      int nelems, int direction);
+
+extern void debug_dma_sync_sg_for_device(struct device *dev,
+					 struct scatterlist *sg,
+					 int nelems, int direction);
+
+extern void debug_dma_dump_mappings(struct device *dev);
+
+#else /* CONFIG_DMA_API_DEBUG */
+
+static inline void dma_debug_add_bus(struct bus_type *bus)
+{
+}
+
+static inline void dma_debug_init(u32 num_entries)
+{
+}
+
+static inline int dma_debug_resize_entries(u32 num_entries)
+{
+	return 0;
+}
+
+static inline void debug_dma_map_page(struct device *dev, struct page *page,
+				      size_t offset, size_t size,
+				      int direction, dma_addr_t dma_addr,
+				      bool map_single)
+{
+}
+
+static inline void debug_dma_unmap_page(struct device *dev, dma_addr_t addr,
+					size_t size, int direction,
+					bool map_single)
+{
+}
+
+static inline void debug_dma_map_sg(struct device *dev, struct scatterlist *sg,
+				    int nents, int mapped_ents, int direction)
+{
+}
+
+static inline void debug_dma_unmap_sg(struct device *dev,
+				      struct scatterlist *sglist,
+				      int nelems, int dir)
+{
+}
+
+static inline void debug_dma_alloc_coherent(struct device *dev, size_t size,
+					    dma_addr_t dma_addr, void *virt)
+{
+}
+
+static inline void debug_dma_free_coherent(struct device *dev, size_t size,
+					   void *virt, dma_addr_t addr)
+{
+}
+
+static inline void debug_dma_sync_single_for_cpu(struct device *dev,
+						 dma_addr_t dma_handle,
+						 size_t size, int direction)
+{
+}
+
+static inline void debug_dma_sync_single_for_device(struct device *dev,
+						    dma_addr_t dma_handle,
+						    size_t size, int direction)
+{
+}
+
+static inline void debug_dma_sync_single_range_for_cpu(struct device *dev,
+						       dma_addr_t dma_handle,
+						       unsigned long offset,
+						       size_t size,
+						       int direction)
+{
+}
+
+static inline void debug_dma_sync_single_range_for_device(struct device *dev,
+							  dma_addr_t dma_handle,
+							  unsigned long offset,
+							  size_t size,
+							  int direction)
+{
+}
+
+static inline void debug_dma_sync_sg_for_cpu(struct device *dev,
+					     struct scatterlist *sg,
+					     int nelems, int direction)
+{
+}
+
+static inline void debug_dma_sync_sg_for_device(struct device *dev,
+						struct scatterlist *sg,
+						int nelems, int direction)
+{
+}
+
+static inline void debug_dma_dump_mappings(struct device *dev)
+{
+}
+
+#endif /* CONFIG_DMA_API_DEBUG */
+
+#endif /* __DMA_DEBUG_H */
diff --git a/include/linux/dma-direction.h b/include/linux/dma-direction.h
new file mode 100644
index 00000000..95b6a82f
--- /dev/null
+++ b/include/linux/dma-direction.h
@@ -0,0 +1,13 @@
+#ifndef _LINUX_DMA_DIRECTION_H
+#define _LINUX_DMA_DIRECTION_H
+/*
+ * These definitions mirror those in pci.h, so they can be used
+ * interchangeably with their PCI_ counterparts.
+ */
+enum dma_data_direction {
+	DMA_BIDIRECTIONAL = 0,
+	DMA_TO_DEVICE = 1,
+	DMA_FROM_DEVICE = 2,
+	DMA_NONE = 3,
+};
+#endif
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
new file mode 100644
index 00000000..dfc099e5
--- /dev/null
+++ b/include/linux/dma-mapping.h
@@ -0,0 +1,237 @@
+#ifndef _LINUX_DMA_MAPPING_H
+#define _LINUX_DMA_MAPPING_H
+
+#include <linux/string.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/dma-attrs.h>
+#include <linux/dma-direction.h>
+#include <linux/scatterlist.h>
+
+struct dma_map_ops {
+	void* (*alloc)(struct device *dev, size_t size,
+				dma_addr_t *dma_handle, gfp_t gfp,
+				struct dma_attrs *attrs);
+	void (*free)(struct device *dev, size_t size,
+			      void *vaddr, dma_addr_t dma_handle,
+			      struct dma_attrs *attrs);
+	int (*mmap)(struct device *, struct vm_area_struct *,
+			  void *, dma_addr_t, size_t, struct dma_attrs *attrs);
+
+	dma_addr_t (*map_page)(struct device *dev, struct page *page,
+			       unsigned long offset, size_t size,
+			       enum dma_data_direction dir,
+			       struct dma_attrs *attrs);
+	void (*unmap_page)(struct device *dev, dma_addr_t dma_handle,
+			   size_t size, enum dma_data_direction dir,
+			   struct dma_attrs *attrs);
+	int (*map_sg)(struct device *dev, struct scatterlist *sg,
+		      int nents, enum dma_data_direction dir,
+		      struct dma_attrs *attrs);
+	void (*unmap_sg)(struct device *dev,
+			 struct scatterlist *sg, int nents,
+			 enum dma_data_direction dir,
+			 struct dma_attrs *attrs);
+	void (*sync_single_for_cpu)(struct device *dev,
+				    dma_addr_t dma_handle, size_t size,
+				    enum dma_data_direction dir);
+	void (*sync_single_for_device)(struct device *dev,
+				       dma_addr_t dma_handle, size_t size,
+				       enum dma_data_direction dir);
+	void (*sync_sg_for_cpu)(struct device *dev,
+				struct scatterlist *sg, int nents,
+				enum dma_data_direction dir);
+	void (*sync_sg_for_device)(struct device *dev,
+				   struct scatterlist *sg, int nents,
+				   enum dma_data_direction dir);
+	int (*mapping_error)(struct device *dev, dma_addr_t dma_addr);
+	int (*dma_supported)(struct device *dev, u64 mask);
+	int (*set_dma_mask)(struct device *dev, u64 mask);
+#ifdef ARCH_HAS_DMA_GET_REQUIRED_MASK
+	u64 (*get_required_mask)(struct device *dev);
+#endif
+	int is_phys;
+};
+
+#define DMA_BIT_MASK(n)	(((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
+
+#define DMA_MASK_NONE	0x0ULL
+
+static inline int valid_dma_direction(int dma_direction)
+{
+	return ((dma_direction == DMA_BIDIRECTIONAL) ||
+		(dma_direction == DMA_TO_DEVICE) ||
+		(dma_direction == DMA_FROM_DEVICE));
+}
+
+static inline int is_device_dma_capable(struct device *dev)
+{
+	return dev->dma_mask != NULL && *dev->dma_mask != DMA_MASK_NONE;
+}
+
+#ifdef CONFIG_HAS_DMA
+#include <asm/dma-mapping.h>
+#else
+#include <asm-generic/dma-mapping-broken.h>
+#endif
+
+static inline u64 dma_get_mask(struct device *dev)
+{
+	if (dev && dev->dma_mask && *dev->dma_mask)
+		return *dev->dma_mask;
+	return DMA_BIT_MASK(32);
+}
+
+#ifdef CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK
+int dma_set_coherent_mask(struct device *dev, u64 mask);
+#else
+static inline int dma_set_coherent_mask(struct device *dev, u64 mask)
+{
+	if (!dma_supported(dev, mask))
+		return -EIO;
+	dev->coherent_dma_mask = mask;
+	return 0;
+}
+#endif
+
+extern u64 dma_get_required_mask(struct device *dev);
+
+static inline unsigned int dma_get_max_seg_size(struct device *dev)
+{
+	return dev->dma_parms ? dev->dma_parms->max_segment_size : 65536;
+}
+
+static inline unsigned int dma_set_max_seg_size(struct device *dev,
+						unsigned int size)
+{
+	if (dev->dma_parms) {
+		dev->dma_parms->max_segment_size = size;
+		return 0;
+	} else
+		return -EIO;
+}
+
+static inline unsigned long dma_get_seg_boundary(struct device *dev)
+{
+	return dev->dma_parms ?
+		dev->dma_parms->segment_boundary_mask : 0xffffffff;
+}
+
+static inline int dma_set_seg_boundary(struct device *dev, unsigned long mask)
+{
+	if (dev->dma_parms) {
+		dev->dma_parms->segment_boundary_mask = mask;
+		return 0;
+	} else
+		return -EIO;
+}
+
+static inline void *dma_zalloc_coherent(struct device *dev, size_t size,
+					dma_addr_t *dma_handle, gfp_t flag)
+{
+	void *ret = dma_alloc_coherent(dev, size, dma_handle, flag);
+	if (ret)
+		memset(ret, 0, size);
+	return ret;
+}
+
+#ifdef CONFIG_HAS_DMA
+static inline int dma_get_cache_alignment(void)
+{
+#ifdef ARCH_DMA_MINALIGN
+	return ARCH_DMA_MINALIGN;
+#endif
+	return 1;
+}
+#endif
+
+/* flags for the coherent memory api */
+#define	DMA_MEMORY_MAP			0x01
+#define DMA_MEMORY_IO			0x02
+#define DMA_MEMORY_INCLUDES_CHILDREN	0x04
+#define DMA_MEMORY_EXCLUSIVE		0x08
+
+#ifndef ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
+static inline int
+dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
+			    dma_addr_t device_addr, size_t size, int flags)
+{
+	return 0;
+}
+
+static inline void
+dma_release_declared_memory(struct device *dev)
+{
+}
+
+static inline void *
+dma_mark_declared_memory_occupied(struct device *dev,
+				  dma_addr_t device_addr, size_t size)
+{
+	return ERR_PTR(-EBUSY);
+}
+#endif
+
+/*
+ * Managed DMA API
+ */
+extern void *dmam_alloc_coherent(struct device *dev, size_t size,
+				 dma_addr_t *dma_handle, gfp_t gfp);
+extern void dmam_free_coherent(struct device *dev, size_t size, void *vaddr,
+			       dma_addr_t dma_handle);
+extern void *dmam_alloc_noncoherent(struct device *dev, size_t size,
+				    dma_addr_t *dma_handle, gfp_t gfp);
+extern void dmam_free_noncoherent(struct device *dev, size_t size, void *vaddr,
+				  dma_addr_t dma_handle);
+#ifdef ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
+extern int dmam_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
+					dma_addr_t device_addr, size_t size,
+					int flags);
+extern void dmam_release_declared_memory(struct device *dev);
+#else /* ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY */
+static inline int dmam_declare_coherent_memory(struct device *dev,
+				dma_addr_t bus_addr, dma_addr_t device_addr,
+				size_t size, gfp_t gfp)
+{
+	return 0;
+}
+
+static inline void dmam_release_declared_memory(struct device *dev)
+{
+}
+#endif /* ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY */
+
+#ifndef CONFIG_HAVE_DMA_ATTRS
+struct dma_attrs;
+
+#define dma_map_single_attrs(dev, cpu_addr, size, dir, attrs) \
+	dma_map_single(dev, cpu_addr, size, dir)
+
+#define dma_unmap_single_attrs(dev, dma_addr, size, dir, attrs) \
+	dma_unmap_single(dev, dma_addr, size, dir)
+
+#define dma_map_sg_attrs(dev, sgl, nents, dir, attrs) \
+	dma_map_sg(dev, sgl, nents, dir)
+
+#define dma_unmap_sg_attrs(dev, sgl, nents, dir, attrs) \
+	dma_unmap_sg(dev, sgl, nents, dir)
+
+#endif /* CONFIG_HAVE_DMA_ATTRS */
+
+#ifdef CONFIG_NEED_DMA_MAP_STATE
+#define DEFINE_DMA_UNMAP_ADDR(ADDR_NAME)        dma_addr_t ADDR_NAME
+#define DEFINE_DMA_UNMAP_LEN(LEN_NAME)          __u32 LEN_NAME
+#define dma_unmap_addr(PTR, ADDR_NAME)           ((PTR)->ADDR_NAME)
+#define dma_unmap_addr_set(PTR, ADDR_NAME, VAL)  (((PTR)->ADDR_NAME) = (VAL))
+#define dma_unmap_len(PTR, LEN_NAME)             ((PTR)->LEN_NAME)
+#define dma_unmap_len_set(PTR, LEN_NAME, VAL)    (((PTR)->LEN_NAME) = (VAL))
+#else
+#define DEFINE_DMA_UNMAP_ADDR(ADDR_NAME)
+#define DEFINE_DMA_UNMAP_LEN(LEN_NAME)
+#define dma_unmap_addr(PTR, ADDR_NAME)           (0)
+#define dma_unmap_addr_set(PTR, ADDR_NAME, VAL)  do { } while (0)
+#define dma_unmap_len(PTR, LEN_NAME)             (0)
+#define dma_unmap_len_set(PTR, LEN_NAME, VAL)    do { } while (0)
+#endif
+
+#endif
diff --git a/include/linux/dma_remapping.h b/include/linux/dma_remapping.h
new file mode 100644
index 00000000..57c9a8ae
--- /dev/null
+++ b/include/linux/dma_remapping.h
@@ -0,0 +1,52 @@
+#ifndef _DMA_REMAPPING_H
+#define _DMA_REMAPPING_H
+
+/*
+ * VT-d hardware uses 4KiB page size regardless of host page size.
+ */
+#define VTD_PAGE_SHIFT		(12)
+#define VTD_PAGE_SIZE		(1UL << VTD_PAGE_SHIFT)
+#define VTD_PAGE_MASK		(((u64)-1) << VTD_PAGE_SHIFT)
+#define VTD_PAGE_ALIGN(addr)	(((addr) + VTD_PAGE_SIZE - 1) & VTD_PAGE_MASK)
+
+#define VTD_STRIDE_SHIFT        (9)
+#define VTD_STRIDE_MASK         (((u64)-1) << VTD_STRIDE_SHIFT)
+
+#define DMA_PTE_READ (1)
+#define DMA_PTE_WRITE (2)
+#define DMA_PTE_LARGE_PAGE (1 << 7)
+#define DMA_PTE_SNP (1 << 11)
+
+#define CONTEXT_TT_MULTI_LEVEL	0
+#define CONTEXT_TT_DEV_IOTLB	1
+#define CONTEXT_TT_PASS_THROUGH 2
+
+struct intel_iommu;
+struct dmar_domain;
+struct root_entry;
+
+
+#ifdef CONFIG_INTEL_IOMMU
+extern void free_dmar_iommu(struct intel_iommu *iommu);
+extern int iommu_calculate_agaw(struct intel_iommu *iommu);
+extern int iommu_calculate_max_sagaw(struct intel_iommu *iommu);
+extern int dmar_disabled;
+extern int intel_iommu_enabled;
+#else
+static inline int iommu_calculate_agaw(struct intel_iommu *iommu)
+{
+	return 0;
+}
+static inline int iommu_calculate_max_sagaw(struct intel_iommu *iommu)
+{
+	return 0;
+}
+static inline void free_dmar_iommu(struct intel_iommu *iommu)
+{
+}
+#define dmar_disabled	(1)
+#define intel_iommu_enabled (0)
+#endif
+
+
+#endif
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
new file mode 100644
index 00000000..f9a2e5e6
--- /dev/null
+++ b/include/linux/dmaengine.h
@@ -0,0 +1,1002 @@
+/*
+ * Copyright(c) 2004 - 2006 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called COPYING.
+ */
+#ifndef LINUX_DMAENGINE_H
+#define LINUX_DMAENGINE_H
+
+#include <linux/device.h>
+#include <linux/uio.h>
+#include <linux/bug.h>
+#include <linux/scatterlist.h>
+#include <linux/bitmap.h>
+#include <linux/types.h>
+#include <asm/page.h>
+
+/**
+ * typedef dma_cookie_t - an opaque DMA cookie
+ *
+ * if dma_cookie_t is >0 it's a DMA request cookie, <0 it's an error code
+ */
+typedef s32 dma_cookie_t;
+#define DMA_MIN_COOKIE	1
+#define DMA_MAX_COOKIE	INT_MAX
+
+#define dma_submit_error(cookie) ((cookie) < 0 ? 1 : 0)
+
+/**
+ * enum dma_status - DMA transaction status
+ * @DMA_SUCCESS: transaction completed successfully
+ * @DMA_IN_PROGRESS: transaction not yet processed
+ * @DMA_PAUSED: transaction is paused
+ * @DMA_ERROR: transaction failed
+ */
+enum dma_status {
+	DMA_SUCCESS,
+	DMA_IN_PROGRESS,
+	DMA_PAUSED,
+	DMA_ERROR,
+};
+
+/**
+ * enum dma_transaction_type - DMA transaction types/indexes
+ *
+ * Note: The DMA_ASYNC_TX capability is not to be set by drivers.  It is
+ * automatically set as dma devices are registered.
+ */
+enum dma_transaction_type {
+	DMA_MEMCPY,
+	DMA_XOR,
+	DMA_PQ,
+	DMA_XOR_VAL,
+	DMA_PQ_VAL,
+	DMA_MEMSET,
+	DMA_INTERRUPT,
+	DMA_SG,
+	DMA_PRIVATE,
+	DMA_ASYNC_TX,
+	DMA_SLAVE,
+	DMA_CYCLIC,
+	DMA_INTERLEAVE,
+/* last transaction type for creation of the capabilities mask */
+	DMA_TX_TYPE_END,
+};
+
+/**
+ * enum dma_transfer_direction - dma transfer mode and direction indicator
+ * @DMA_MEM_TO_MEM: Async/Memcpy mode
+ * @DMA_MEM_TO_DEV: Slave mode & From Memory to Device
+ * @DMA_DEV_TO_MEM: Slave mode & From Device to Memory
+ * @DMA_DEV_TO_DEV: Slave mode & From Device to Device
+ */
+enum dma_transfer_direction {
+	DMA_MEM_TO_MEM,
+	DMA_MEM_TO_DEV,
+	DMA_DEV_TO_MEM,
+	DMA_DEV_TO_DEV,
+	DMA_TRANS_NONE,
+};
+
+/**
+ * Interleaved Transfer Request
+ * ----------------------------
+ * A chunk is collection of contiguous bytes to be transfered.
+ * The gap(in bytes) between two chunks is called inter-chunk-gap(ICG).
+ * ICGs may or maynot change between chunks.
+ * A FRAME is the smallest series of contiguous {chunk,icg} pairs,
+ *  that when repeated an integral number of times, specifies the transfer.
+ * A transfer template is specification of a Frame, the number of times
+ *  it is to be repeated and other per-transfer attributes.
+ *
+ * Practically, a client driver would have ready a template for each
+ *  type of transfer it is going to need during its lifetime and
+ *  set only 'src_start' and 'dst_start' before submitting the requests.
+ *
+ *
+ *  |      Frame-1        |       Frame-2       | ~ |       Frame-'numf'  |
+ *  |====....==.===...=...|====....==.===...=...| ~ |====....==.===...=...|
+ *
+ *    ==  Chunk size
+ *    ... ICG
+ */
+
+/**
+ * struct data_chunk - Element of scatter-gather list that makes a frame.
+ * @size: Number of bytes to read from source.
+ *	  size_dst := fn(op, size_src), so doesn't mean much for destination.
+ * @icg: Number of bytes to jump after last src/dst address of this
+ *	 chunk and before first src/dst address for next chunk.
+ *	 Ignored for dst(assumed 0), if dst_inc is true and dst_sgl is false.
+ *	 Ignored for src(assumed 0), if src_inc is true and src_sgl is false.
+ */
+struct data_chunk {
+	size_t size;
+	size_t icg;
+};
+
+/**
+ * struct dma_interleaved_template - Template to convey DMAC the transfer pattern
+ *	 and attributes.
+ * @src_start: Bus address of source for the first chunk.
+ * @dst_start: Bus address of destination for the first chunk.
+ * @dir: Specifies the type of Source and Destination.
+ * @src_inc: If the source address increments after reading from it.
+ * @dst_inc: If the destination address increments after writing to it.
+ * @src_sgl: If the 'icg' of sgl[] applies to Source (scattered read).
+ *		Otherwise, source is read contiguously (icg ignored).
+ *		Ignored if src_inc is false.
+ * @dst_sgl: If the 'icg' of sgl[] applies to Destination (scattered write).
+ *		Otherwise, destination is filled contiguously (icg ignored).
+ *		Ignored if dst_inc is false.
+ * @numf: Number of frames in this template.
+ * @frame_size: Number of chunks in a frame i.e, size of sgl[].
+ * @sgl: Array of {chunk,icg} pairs that make up a frame.
+ */
+struct dma_interleaved_template {
+	dma_addr_t src_start;
+	dma_addr_t dst_start;
+	enum dma_transfer_direction dir;
+	bool src_inc;
+	bool dst_inc;
+	bool src_sgl;
+	bool dst_sgl;
+	size_t numf;
+	size_t frame_size;
+	struct data_chunk sgl[0];
+};
+
+/**
+ * enum dma_ctrl_flags - DMA flags to augment operation preparation,
+ *  control completion, and communicate status.
+ * @DMA_PREP_INTERRUPT - trigger an interrupt (callback) upon completion of
+ *  this transaction
+ * @DMA_CTRL_ACK - if clear, the descriptor cannot be reused until the client
+ *  acknowledges receipt, i.e. has has a chance to establish any dependency
+ *  chains
+ * @DMA_COMPL_SKIP_SRC_UNMAP - set to disable dma-unmapping the source buffer(s)
+ * @DMA_COMPL_SKIP_DEST_UNMAP - set to disable dma-unmapping the destination(s)
+ * @DMA_COMPL_SRC_UNMAP_SINGLE - set to do the source dma-unmapping as single
+ * 	(if not set, do the source dma-unmapping as page)
+ * @DMA_COMPL_DEST_UNMAP_SINGLE - set to do the destination dma-unmapping as single
+ * 	(if not set, do the destination dma-unmapping as page)
+ * @DMA_PREP_PQ_DISABLE_P - prevent generation of P while generating Q
+ * @DMA_PREP_PQ_DISABLE_Q - prevent generation of Q while generating P
+ * @DMA_PREP_CONTINUE - indicate to a driver that it is reusing buffers as
+ *  sources that were the result of a previous operation, in the case of a PQ
+ *  operation it continues the calculation with new sources
+ * @DMA_PREP_FENCE - tell the driver that subsequent operations depend
+ *  on the result of this operation
+ */
+enum dma_ctrl_flags {
+	DMA_PREP_INTERRUPT = (1 << 0),
+	DMA_CTRL_ACK = (1 << 1),
+	DMA_COMPL_SKIP_SRC_UNMAP = (1 << 2),
+	DMA_COMPL_SKIP_DEST_UNMAP = (1 << 3),
+	DMA_COMPL_SRC_UNMAP_SINGLE = (1 << 4),
+	DMA_COMPL_DEST_UNMAP_SINGLE = (1 << 5),
+	DMA_PREP_PQ_DISABLE_P = (1 << 6),
+	DMA_PREP_PQ_DISABLE_Q = (1 << 7),
+	DMA_PREP_CONTINUE = (1 << 8),
+	DMA_PREP_FENCE = (1 << 9),
+};
+
+/**
+ * enum dma_ctrl_cmd - DMA operations that can optionally be exercised
+ * on a running channel.
+ * @DMA_TERMINATE_ALL: terminate all ongoing transfers
+ * @DMA_PAUSE: pause ongoing transfers
+ * @DMA_RESUME: resume paused transfer
+ * @DMA_SLAVE_CONFIG: this command is only implemented by DMA controllers
+ * that need to runtime reconfigure the slave channels (as opposed to passing
+ * configuration data in statically from the platform). An additional
+ * argument of struct dma_slave_config must be passed in with this
+ * command.
+ * @FSLDMA_EXTERNAL_START: this command will put the Freescale DMA controller
+ * into external start mode.
+ */
+enum dma_ctrl_cmd {
+	DMA_TERMINATE_ALL,
+	DMA_PAUSE,
+	DMA_RESUME,
+	DMA_SLAVE_CONFIG,
+	FSLDMA_EXTERNAL_START,
+};
+
+/**
+ * enum sum_check_bits - bit position of pq_check_flags
+ */
+enum sum_check_bits {
+	SUM_CHECK_P = 0,
+	SUM_CHECK_Q = 1,
+};
+
+/**
+ * enum pq_check_flags - result of async_{xor,pq}_zero_sum operations
+ * @SUM_CHECK_P_RESULT - 1 if xor zero sum error, 0 otherwise
+ * @SUM_CHECK_Q_RESULT - 1 if reed-solomon zero sum error, 0 otherwise
+ */
+enum sum_check_flags {
+	SUM_CHECK_P_RESULT = (1 << SUM_CHECK_P),
+	SUM_CHECK_Q_RESULT = (1 << SUM_CHECK_Q),
+};
+
+
+/**
+ * dma_cap_mask_t - capabilities bitmap modeled after cpumask_t.
+ * See linux/cpumask.h
+ */
+typedef struct { DECLARE_BITMAP(bits, DMA_TX_TYPE_END); } dma_cap_mask_t;
+
+/**
+ * struct dma_chan_percpu - the per-CPU part of struct dma_chan
+ * @memcpy_count: transaction counter
+ * @bytes_transferred: byte counter
+ */
+
+struct dma_chan_percpu {
+	/* stats */
+	unsigned long memcpy_count;
+	unsigned long bytes_transferred;
+};
+
+/**
+ * struct dma_chan - devices supply DMA channels, clients use them
+ * @device: ptr to the dma device who supplies this channel, always !%NULL
+ * @cookie: last cookie value returned to client
+ * @completed_cookie: last completed cookie for this channel
+ * @chan_id: channel ID for sysfs
+ * @dev: class device for sysfs
+ * @device_node: used to add this to the device chan list
+ * @local: per-cpu pointer to a struct dma_chan_percpu
+ * @client-count: how many clients are using this channel
+ * @table_count: number of appearances in the mem-to-mem allocation table
+ * @private: private data for certain client-channel associations
+ */
+struct dma_chan {
+	struct dma_device *device;
+	dma_cookie_t cookie;
+	dma_cookie_t completed_cookie;
+
+	/* sysfs */
+	int chan_id;
+	struct dma_chan_dev *dev;
+
+	struct list_head device_node;
+	struct dma_chan_percpu __percpu *local;
+	int client_count;
+	int table_count;
+	void *private;
+};
+
+/**
+ * struct dma_chan_dev - relate sysfs device node to backing channel device
+ * @chan - driver channel device
+ * @device - sysfs device
+ * @dev_id - parent dma_device dev_id
+ * @idr_ref - reference count to gate release of dma_device dev_id
+ */
+struct dma_chan_dev {
+	struct dma_chan *chan;
+	struct device device;
+	int dev_id;
+	atomic_t *idr_ref;
+};
+
+/**
+ * enum dma_slave_buswidth - defines bus with of the DMA slave
+ * device, source or target buses
+ */
+enum dma_slave_buswidth {
+	DMA_SLAVE_BUSWIDTH_UNDEFINED = 0,
+	DMA_SLAVE_BUSWIDTH_1_BYTE = 1,
+	DMA_SLAVE_BUSWIDTH_2_BYTES = 2,
+	DMA_SLAVE_BUSWIDTH_4_BYTES = 4,
+	DMA_SLAVE_BUSWIDTH_8_BYTES = 8,
+};
+
+/**
+ * struct dma_slave_config - dma slave channel runtime config
+ * @direction: whether the data shall go in or out on this slave
+ * channel, right now. DMA_TO_DEVICE and DMA_FROM_DEVICE are
+ * legal values, DMA_BIDIRECTIONAL is not acceptable since we
+ * need to differentiate source and target addresses.
+ * @src_addr: this is the physical address where DMA slave data
+ * should be read (RX), if the source is memory this argument is
+ * ignored.
+ * @dst_addr: this is the physical address where DMA slave data
+ * should be written (TX), if the source is memory this argument
+ * is ignored.
+ * @src_addr_width: this is the width in bytes of the source (RX)
+ * register where DMA data shall be read. If the source
+ * is memory this may be ignored depending on architecture.
+ * Legal values: 1, 2, 4, 8.
+ * @dst_addr_width: same as src_addr_width but for destination
+ * target (TX) mutatis mutandis.
+ * @src_maxburst: the maximum number of words (note: words, as in
+ * units of the src_addr_width member, not bytes) that can be sent
+ * in one burst to the device. Typically something like half the
+ * FIFO depth on I/O peripherals so you don't overflow it. This
+ * may or may not be applicable on memory sources.
+ * @dst_maxburst: same as src_maxburst but for destination target
+ * mutatis mutandis.
+ * @device_fc: Flow Controller Settings. Only valid for slave channels. Fill
+ * with 'true' if peripheral should be flow controller. Direction will be
+ * selected at Runtime.
+ *
+ * This struct is passed in as configuration data to a DMA engine
+ * in order to set up a certain channel for DMA transport at runtime.
+ * The DMA device/engine has to provide support for an additional
+ * command in the channel config interface, DMA_SLAVE_CONFIG
+ * and this struct will then be passed in as an argument to the
+ * DMA engine device_control() function.
+ *
+ * The rationale for adding configuration information to this struct
+ * is as follows: if it is likely that most DMA slave controllers in
+ * the world will support the configuration option, then make it
+ * generic. If not: if it is fixed so that it be sent in static from
+ * the platform data, then prefer to do that. Else, if it is neither
+ * fixed at runtime, nor generic enough (such as bus mastership on
+ * some CPU family and whatnot) then create a custom slave config
+ * struct and pass that, then make this config a member of that
+ * struct, if applicable.
+ */
+struct dma_slave_config {
+	enum dma_transfer_direction direction;
+	dma_addr_t src_addr;
+	dma_addr_t dst_addr;
+	enum dma_slave_buswidth src_addr_width;
+	enum dma_slave_buswidth dst_addr_width;
+	u32 src_maxburst;
+	u32 dst_maxburst;
+	bool device_fc;
+};
+
+static inline const char *dma_chan_name(struct dma_chan *chan)
+{
+	return dev_name(&chan->dev->device);
+}
+
+void dma_chan_cleanup(struct kref *kref);
+
+/**
+ * typedef dma_filter_fn - callback filter for dma_request_channel
+ * @chan: channel to be reviewed
+ * @filter_param: opaque parameter passed through dma_request_channel
+ *
+ * When this optional parameter is specified in a call to dma_request_channel a
+ * suitable channel is passed to this routine for further dispositioning before
+ * being returned.  Where 'suitable' indicates a non-busy channel that
+ * satisfies the given capability mask.  It returns 'true' to indicate that the
+ * channel is suitable.
+ */
+typedef bool (*dma_filter_fn)(struct dma_chan *chan, void *filter_param);
+
+typedef void (*dma_async_tx_callback)(void *dma_async_param);
+/**
+ * struct dma_async_tx_descriptor - async transaction descriptor
+ * ---dma generic offload fields---
+ * @cookie: tracking cookie for this transaction, set to -EBUSY if
+ *	this tx is sitting on a dependency list
+ * @flags: flags to augment operation preparation, control completion, and
+ * 	communicate status
+ * @phys: physical address of the descriptor
+ * @chan: target channel for this operation
+ * @tx_submit: set the prepared descriptor(s) to be executed by the engine
+ * @callback: routine to call after this operation is complete
+ * @callback_param: general parameter to pass to the callback routine
+ * ---async_tx api specific fields---
+ * @next: at completion submit this descriptor
+ * @parent: pointer to the next level up in the dependency chain
+ * @lock: protect the parent and next pointers
+ */
+struct dma_async_tx_descriptor {
+	dma_cookie_t cookie;
+	enum dma_ctrl_flags flags; /* not a 'long' to pack with cookie */
+	dma_addr_t phys;
+	struct dma_chan *chan;
+	dma_cookie_t (*tx_submit)(struct dma_async_tx_descriptor *tx);
+	dma_async_tx_callback callback;
+	void *callback_param;
+#ifdef CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH
+	struct dma_async_tx_descriptor *next;
+	struct dma_async_tx_descriptor *parent;
+	spinlock_t lock;
+#endif
+};
+
+#ifndef CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH
+static inline void txd_lock(struct dma_async_tx_descriptor *txd)
+{
+}
+static inline void txd_unlock(struct dma_async_tx_descriptor *txd)
+{
+}
+static inline void txd_chain(struct dma_async_tx_descriptor *txd, struct dma_async_tx_descriptor *next)
+{
+	BUG();
+}
+static inline void txd_clear_parent(struct dma_async_tx_descriptor *txd)
+{
+}
+static inline void txd_clear_next(struct dma_async_tx_descriptor *txd)
+{
+}
+static inline struct dma_async_tx_descriptor *txd_next(struct dma_async_tx_descriptor *txd)
+{
+	return NULL;
+}
+static inline struct dma_async_tx_descriptor *txd_parent(struct dma_async_tx_descriptor *txd)
+{
+	return NULL;
+}
+
+#else
+static inline void txd_lock(struct dma_async_tx_descriptor *txd)
+{
+	spin_lock_bh(&txd->lock);
+}
+static inline void txd_unlock(struct dma_async_tx_descriptor *txd)
+{
+	spin_unlock_bh(&txd->lock);
+}
+static inline void txd_chain(struct dma_async_tx_descriptor *txd, struct dma_async_tx_descriptor *next)
+{
+	txd->next = next;
+	next->parent = txd;
+}
+static inline void txd_clear_parent(struct dma_async_tx_descriptor *txd)
+{
+	txd->parent = NULL;
+}
+static inline void txd_clear_next(struct dma_async_tx_descriptor *txd)
+{
+	txd->next = NULL;
+}
+static inline struct dma_async_tx_descriptor *txd_parent(struct dma_async_tx_descriptor *txd)
+{
+	return txd->parent;
+}
+static inline struct dma_async_tx_descriptor *txd_next(struct dma_async_tx_descriptor *txd)
+{
+	return txd->next;
+}
+#endif
+
+/**
+ * struct dma_tx_state - filled in to report the status of
+ * a transfer.
+ * @last: last completed DMA cookie
+ * @used: last issued DMA cookie (i.e. the one in progress)
+ * @residue: the remaining number of bytes left to transmit
+ *	on the selected transfer for states DMA_IN_PROGRESS and
+ *	DMA_PAUSED if this is implemented in the driver, else 0
+ */
+struct dma_tx_state {
+	dma_cookie_t last;
+	dma_cookie_t used;
+	u32 residue;
+};
+
+/**
+ * struct dma_device - info on the entity supplying DMA services
+ * @chancnt: how many DMA channels are supported
+ * @privatecnt: how many DMA channels are requested by dma_request_channel
+ * @channels: the list of struct dma_chan
+ * @global_node: list_head for global dma_device_list
+ * @cap_mask: one or more dma_capability flags
+ * @max_xor: maximum number of xor sources, 0 if no capability
+ * @max_pq: maximum number of PQ sources and PQ-continue capability
+ * @copy_align: alignment shift for memcpy operations
+ * @xor_align: alignment shift for xor operations
+ * @pq_align: alignment shift for pq operations
+ * @fill_align: alignment shift for memset operations
+ * @dev_id: unique device ID
+ * @dev: struct device reference for dma mapping api
+ * @device_alloc_chan_resources: allocate resources and return the
+ *	number of allocated descriptors
+ * @device_free_chan_resources: release DMA channel's resources
+ * @device_prep_dma_memcpy: prepares a memcpy operation
+ * @device_prep_dma_xor: prepares a xor operation
+ * @device_prep_dma_xor_val: prepares a xor validation operation
+ * @device_prep_dma_pq: prepares a pq operation
+ * @device_prep_dma_pq_val: prepares a pqzero_sum operation
+ * @device_prep_dma_memset: prepares a memset operation
+ * @device_prep_dma_interrupt: prepares an end of chain interrupt operation
+ * @device_prep_slave_sg: prepares a slave dma operation
+ * @device_prep_dma_cyclic: prepare a cyclic dma operation suitable for audio.
+ *	The function takes a buffer of size buf_len. The callback function will
+ *	be called after period_len bytes have been transferred.
+ * @device_prep_interleaved_dma: Transfer expression in a generic way.
+ * @device_control: manipulate all pending operations on a channel, returns
+ *	zero or error code
+ * @device_tx_status: poll for transaction completion, the optional
+ *	txstate parameter can be supplied with a pointer to get a
+ *	struct with auxiliary transfer status information, otherwise the call
+ *	will just return a simple status code
+ * @device_issue_pending: push pending transactions to hardware
+ */
+struct dma_device {
+
+	unsigned int chancnt;
+	unsigned int privatecnt;
+	struct list_head channels;
+	struct list_head global_node;
+	dma_cap_mask_t  cap_mask;
+	unsigned short max_xor;
+	unsigned short max_pq;
+	u8 copy_align;
+	u8 xor_align;
+	u8 pq_align;
+	u8 fill_align;
+	#define DMA_HAS_PQ_CONTINUE (1 << 15)
+
+	int dev_id;
+	struct device *dev;
+
+	int (*device_alloc_chan_resources)(struct dma_chan *chan);
+	void (*device_free_chan_resources)(struct dma_chan *chan);
+
+	struct dma_async_tx_descriptor *(*device_prep_dma_memcpy)(
+		struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
+		size_t len, unsigned long flags);
+	struct dma_async_tx_descriptor *(*device_prep_dma_xor)(
+		struct dma_chan *chan, dma_addr_t dest, dma_addr_t *src,
+		unsigned int src_cnt, size_t len, unsigned long flags);
+	struct dma_async_tx_descriptor *(*device_prep_dma_xor_val)(
+		struct dma_chan *chan, dma_addr_t *src,	unsigned int src_cnt,
+		size_t len, enum sum_check_flags *result, unsigned long flags);
+	struct dma_async_tx_descriptor *(*device_prep_dma_pq)(
+		struct dma_chan *chan, dma_addr_t *dst, dma_addr_t *src,
+		unsigned int src_cnt, const unsigned char *scf,
+		size_t len, unsigned long flags);
+	struct dma_async_tx_descriptor *(*device_prep_dma_pq_val)(
+		struct dma_chan *chan, dma_addr_t *pq, dma_addr_t *src,
+		unsigned int src_cnt, const unsigned char *scf, size_t len,
+		enum sum_check_flags *pqres, unsigned long flags);
+	struct dma_async_tx_descriptor *(*device_prep_dma_memset)(
+		struct dma_chan *chan, dma_addr_t dest, int value, size_t len,
+		unsigned long flags);
+	struct dma_async_tx_descriptor *(*device_prep_dma_interrupt)(
+		struct dma_chan *chan, unsigned long flags);
+	struct dma_async_tx_descriptor *(*device_prep_dma_sg)(
+		struct dma_chan *chan,
+		struct scatterlist *dst_sg, unsigned int dst_nents,
+		struct scatterlist *src_sg, unsigned int src_nents,
+		unsigned long flags);
+
+	struct dma_async_tx_descriptor *(*device_prep_slave_sg)(
+		struct dma_chan *chan, struct scatterlist *sgl,
+		unsigned int sg_len, enum dma_transfer_direction direction,
+		unsigned long flags, void *context);
+	struct dma_async_tx_descriptor *(*device_prep_dma_cyclic)(
+		struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
+		size_t period_len, enum dma_transfer_direction direction,
+		void *context);
+	struct dma_async_tx_descriptor *(*device_prep_interleaved_dma)(
+		struct dma_chan *chan, struct dma_interleaved_template *xt,
+		unsigned long flags);
+	int (*device_control)(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
+		unsigned long arg);
+
+	enum dma_status (*device_tx_status)(struct dma_chan *chan,
+					    dma_cookie_t cookie,
+					    struct dma_tx_state *txstate);
+	void (*device_issue_pending)(struct dma_chan *chan);
+};
+
+static inline int dmaengine_device_control(struct dma_chan *chan,
+					   enum dma_ctrl_cmd cmd,
+					   unsigned long arg)
+{
+	return chan->device->device_control(chan, cmd, arg);
+}
+
+static inline int dmaengine_slave_config(struct dma_chan *chan,
+					  struct dma_slave_config *config)
+{
+	return dmaengine_device_control(chan, DMA_SLAVE_CONFIG,
+			(unsigned long)config);
+}
+
+static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_single(
+	struct dma_chan *chan, void *buf, size_t len,
+	enum dma_transfer_direction dir, unsigned long flags)
+{
+	struct scatterlist sg;
+	sg_init_one(&sg, buf, len);
+
+	return chan->device->device_prep_slave_sg(chan, &sg, 1,
+						  dir, flags, NULL);
+}
+
+static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_sg(
+	struct dma_chan *chan, struct scatterlist *sgl,	unsigned int sg_len,
+	enum dma_transfer_direction dir, unsigned long flags)
+{
+	return chan->device->device_prep_slave_sg(chan, sgl, sg_len,
+						  dir, flags, NULL);
+}
+
+static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_cyclic(
+		struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
+		size_t period_len, enum dma_transfer_direction dir)
+{
+	return chan->device->device_prep_dma_cyclic(chan, buf_addr, buf_len,
+						period_len, dir, NULL);
+}
+
+static inline int dmaengine_terminate_all(struct dma_chan *chan)
+{
+	return dmaengine_device_control(chan, DMA_TERMINATE_ALL, 0);
+}
+
+static inline int dmaengine_pause(struct dma_chan *chan)
+{
+	return dmaengine_device_control(chan, DMA_PAUSE, 0);
+}
+
+static inline int dmaengine_resume(struct dma_chan *chan)
+{
+	return dmaengine_device_control(chan, DMA_RESUME, 0);
+}
+
+static inline dma_cookie_t dmaengine_submit(struct dma_async_tx_descriptor *desc)
+{
+	return desc->tx_submit(desc);
+}
+
+static inline bool dmaengine_check_align(u8 align, size_t off1, size_t off2, size_t len)
+{
+	size_t mask;
+
+	if (!align)
+		return true;
+	mask = (1 << align) - 1;
+	if (mask & (off1 | off2 | len))
+		return false;
+	return true;
+}
+
+static inline bool is_dma_copy_aligned(struct dma_device *dev, size_t off1,
+				       size_t off2, size_t len)
+{
+	return dmaengine_check_align(dev->copy_align, off1, off2, len);
+}
+
+static inline bool is_dma_xor_aligned(struct dma_device *dev, size_t off1,
+				      size_t off2, size_t len)
+{
+	return dmaengine_check_align(dev->xor_align, off1, off2, len);
+}
+
+static inline bool is_dma_pq_aligned(struct dma_device *dev, size_t off1,
+				     size_t off2, size_t len)
+{
+	return dmaengine_check_align(dev->pq_align, off1, off2, len);
+}
+
+static inline bool is_dma_fill_aligned(struct dma_device *dev, size_t off1,
+				       size_t off2, size_t len)
+{
+	return dmaengine_check_align(dev->fill_align, off1, off2, len);
+}
+
+static inline void
+dma_set_maxpq(struct dma_device *dma, int maxpq, int has_pq_continue)
+{
+	dma->max_pq = maxpq;
+	if (has_pq_continue)
+		dma->max_pq |= DMA_HAS_PQ_CONTINUE;
+}
+
+static inline bool dmaf_continue(enum dma_ctrl_flags flags)
+{
+	return (flags & DMA_PREP_CONTINUE) == DMA_PREP_CONTINUE;
+}
+
+static inline bool dmaf_p_disabled_continue(enum dma_ctrl_flags flags)
+{
+	enum dma_ctrl_flags mask = DMA_PREP_CONTINUE | DMA_PREP_PQ_DISABLE_P;
+
+	return (flags & mask) == mask;
+}
+
+static inline bool dma_dev_has_pq_continue(struct dma_device *dma)
+{
+	return (dma->max_pq & DMA_HAS_PQ_CONTINUE) == DMA_HAS_PQ_CONTINUE;
+}
+
+static inline unsigned short dma_dev_to_maxpq(struct dma_device *dma)
+{
+	return dma->max_pq & ~DMA_HAS_PQ_CONTINUE;
+}
+
+/* dma_maxpq - reduce maxpq in the face of continued operations
+ * @dma - dma device with PQ capability
+ * @flags - to check if DMA_PREP_CONTINUE and DMA_PREP_PQ_DISABLE_P are set
+ *
+ * When an engine does not support native continuation we need 3 extra
+ * source slots to reuse P and Q with the following coefficients:
+ * 1/ {00} * P : remove P from Q', but use it as a source for P'
+ * 2/ {01} * Q : use Q to continue Q' calculation
+ * 3/ {00} * Q : subtract Q from P' to cancel (2)
+ *
+ * In the case where P is disabled we only need 1 extra source:
+ * 1/ {01} * Q : use Q to continue Q' calculation
+ */
+static inline int dma_maxpq(struct dma_device *dma, enum dma_ctrl_flags flags)
+{
+	if (dma_dev_has_pq_continue(dma) || !dmaf_continue(flags))
+		return dma_dev_to_maxpq(dma);
+	else if (dmaf_p_disabled_continue(flags))
+		return dma_dev_to_maxpq(dma) - 1;
+	else if (dmaf_continue(flags))
+		return dma_dev_to_maxpq(dma) - 3;
+	BUG();
+}
+
+/* --- public DMA engine API --- */
+
+#ifdef CONFIG_DMA_ENGINE
+void dmaengine_get(void);
+void dmaengine_put(void);
+#else
+static inline void dmaengine_get(void)
+{
+}
+static inline void dmaengine_put(void)
+{
+}
+#endif
+
+#ifdef CONFIG_NET_DMA
+#define net_dmaengine_get()	dmaengine_get()
+#define net_dmaengine_put()	dmaengine_put()
+#else
+static inline void net_dmaengine_get(void)
+{
+}
+static inline void net_dmaengine_put(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ASYNC_TX_DMA
+#define async_dmaengine_get()	dmaengine_get()
+#define async_dmaengine_put()	dmaengine_put()
+#ifndef CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH
+#define async_dma_find_channel(type) dma_find_channel(DMA_ASYNC_TX)
+#else
+#define async_dma_find_channel(type) dma_find_channel(type)
+#endif /* CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH */
+#else
+static inline void async_dmaengine_get(void)
+{
+}
+static inline void async_dmaengine_put(void)
+{
+}
+static inline struct dma_chan *
+async_dma_find_channel(enum dma_transaction_type type)
+{
+	return NULL;
+}
+#endif /* CONFIG_ASYNC_TX_DMA */
+
+dma_cookie_t dma_async_memcpy_buf_to_buf(struct dma_chan *chan,
+	void *dest, void *src, size_t len);
+dma_cookie_t dma_async_memcpy_buf_to_pg(struct dma_chan *chan,
+	struct page *page, unsigned int offset, void *kdata, size_t len);
+dma_cookie_t dma_async_memcpy_pg_to_pg(struct dma_chan *chan,
+	struct page *dest_pg, unsigned int dest_off, struct page *src_pg,
+	unsigned int src_off, size_t len);
+void dma_async_tx_descriptor_init(struct dma_async_tx_descriptor *tx,
+	struct dma_chan *chan);
+
+static inline void async_tx_ack(struct dma_async_tx_descriptor *tx)
+{
+	tx->flags |= DMA_CTRL_ACK;
+}
+
+static inline void async_tx_clear_ack(struct dma_async_tx_descriptor *tx)
+{
+	tx->flags &= ~DMA_CTRL_ACK;
+}
+
+static inline bool async_tx_test_ack(struct dma_async_tx_descriptor *tx)
+{
+	return (tx->flags & DMA_CTRL_ACK) == DMA_CTRL_ACK;
+}
+
+#define first_dma_cap(mask) __first_dma_cap(&(mask))
+static inline int __first_dma_cap(const dma_cap_mask_t *srcp)
+{
+	return min_t(int, DMA_TX_TYPE_END,
+		find_first_bit(srcp->bits, DMA_TX_TYPE_END));
+}
+
+#define next_dma_cap(n, mask) __next_dma_cap((n), &(mask))
+static inline int __next_dma_cap(int n, const dma_cap_mask_t *srcp)
+{
+	return min_t(int, DMA_TX_TYPE_END,
+		find_next_bit(srcp->bits, DMA_TX_TYPE_END, n+1));
+}
+
+#define dma_cap_set(tx, mask) __dma_cap_set((tx), &(mask))
+static inline void
+__dma_cap_set(enum dma_transaction_type tx_type, dma_cap_mask_t *dstp)
+{
+	set_bit(tx_type, dstp->bits);
+}
+
+#define dma_cap_clear(tx, mask) __dma_cap_clear((tx), &(mask))
+static inline void
+__dma_cap_clear(enum dma_transaction_type tx_type, dma_cap_mask_t *dstp)
+{
+	clear_bit(tx_type, dstp->bits);
+}
+
+#define dma_cap_zero(mask) __dma_cap_zero(&(mask))
+static inline void __dma_cap_zero(dma_cap_mask_t *dstp)
+{
+	bitmap_zero(dstp->bits, DMA_TX_TYPE_END);
+}
+
+#define dma_has_cap(tx, mask) __dma_has_cap((tx), &(mask))
+static inline int
+__dma_has_cap(enum dma_transaction_type tx_type, dma_cap_mask_t *srcp)
+{
+	return test_bit(tx_type, srcp->bits);
+}
+
+#define for_each_dma_cap_mask(cap, mask) \
+	for ((cap) = first_dma_cap(mask);	\
+		(cap) < DMA_TX_TYPE_END;	\
+		(cap) = next_dma_cap((cap), (mask)))
+
+/**
+ * dma_async_issue_pending - flush pending transactions to HW
+ * @chan: target DMA channel
+ *
+ * This allows drivers to push copies to HW in batches,
+ * reducing MMIO writes where possible.
+ */
+static inline void dma_async_issue_pending(struct dma_chan *chan)
+{
+	chan->device->device_issue_pending(chan);
+}
+
+#define dma_async_memcpy_issue_pending(chan) dma_async_issue_pending(chan)
+
+/**
+ * dma_async_is_tx_complete - poll for transaction completion
+ * @chan: DMA channel
+ * @cookie: transaction identifier to check status of
+ * @last: returns last completed cookie, can be NULL
+ * @used: returns last issued cookie, can be NULL
+ *
+ * If @last and @used are passed in, upon return they reflect the driver
+ * internal state and can be used with dma_async_is_complete() to check
+ * the status of multiple cookies without re-checking hardware state.
+ */
+static inline enum dma_status dma_async_is_tx_complete(struct dma_chan *chan,
+	dma_cookie_t cookie, dma_cookie_t *last, dma_cookie_t *used)
+{
+	struct dma_tx_state state;
+	enum dma_status status;
+
+	status = chan->device->device_tx_status(chan, cookie, &state);
+	if (last)
+		*last = state.last;
+	if (used)
+		*used = state.used;
+	return status;
+}
+
+#define dma_async_memcpy_complete(chan, cookie, last, used)\
+	dma_async_is_tx_complete(chan, cookie, last, used)
+
+/**
+ * dma_async_is_complete - test a cookie against chan state
+ * @cookie: transaction identifier to test status of
+ * @last_complete: last know completed transaction
+ * @last_used: last cookie value handed out
+ *
+ * dma_async_is_complete() is used in dma_async_memcpy_complete()
+ * the test logic is separated for lightweight testing of multiple cookies
+ */
+static inline enum dma_status dma_async_is_complete(dma_cookie_t cookie,
+			dma_cookie_t last_complete, dma_cookie_t last_used)
+{
+	if (last_complete <= last_used) {
+		if ((cookie <= last_complete) || (cookie > last_used))
+			return DMA_SUCCESS;
+	} else {
+		if ((cookie <= last_complete) && (cookie > last_used))
+			return DMA_SUCCESS;
+	}
+	return DMA_IN_PROGRESS;
+}
+
+static inline void
+dma_set_tx_state(struct dma_tx_state *st, dma_cookie_t last, dma_cookie_t used, u32 residue)
+{
+	if (st) {
+		st->last = last;
+		st->used = used;
+		st->residue = residue;
+	}
+}
+
+enum dma_status dma_sync_wait(struct dma_chan *chan, dma_cookie_t cookie);
+#ifdef CONFIG_DMA_ENGINE
+enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx);
+void dma_issue_pending_all(void);
+struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, dma_filter_fn fn, void *fn_param);
+void dma_release_channel(struct dma_chan *chan);
+#else
+static inline enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx)
+{
+	return DMA_SUCCESS;
+}
+static inline void dma_issue_pending_all(void)
+{
+}
+static inline struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask,
+					      dma_filter_fn fn, void *fn_param)
+{
+	return NULL;
+}
+static inline void dma_release_channel(struct dma_chan *chan)
+{
+}
+#endif
+
+/* --- DMA device --- */
+
+int dma_async_device_register(struct dma_device *device);
+void dma_async_device_unregister(struct dma_device *device);
+void dma_run_dependencies(struct dma_async_tx_descriptor *tx);
+struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type);
+struct dma_chan *net_dma_find_channel(void);
+#define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y)
+
+/* --- Helper iov-locking functions --- */
+
+struct dma_page_list {
+	char __user *base_address;
+	int nr_pages;
+	struct page **pages;
+};
+
+struct dma_pinned_list {
+	int nr_iovecs;
+	struct dma_page_list page_list[0];
+};
+
+struct dma_pinned_list *dma_pin_iovec_pages(struct iovec *iov, size_t len);
+void dma_unpin_iovec_pages(struct dma_pinned_list* pinned_list);
+
+dma_cookie_t dma_memcpy_to_iovec(struct dma_chan *chan, struct iovec *iov,
+	struct dma_pinned_list *pinned_list, unsigned char *kdata, size_t len);
+dma_cookie_t dma_memcpy_pg_to_iovec(struct dma_chan *chan, struct iovec *iov,
+	struct dma_pinned_list *pinned_list, struct page *page,
+	unsigned int offset, size_t len);
+
+#endif /* DMAENGINE_H */
diff --git a/include/linux/dmapool.h b/include/linux/dmapool.h
new file mode 100644
index 00000000..022e34fc
--- /dev/null
+++ b/include/linux/dmapool.h
@@ -0,0 +1,35 @@
+/*
+ * include/linux/dmapool.h
+ *
+ * Allocation pools for DMAable (coherent) memory.
+ *
+ * This file is licensed under  the terms of the GNU General Public 
+ * License version 2. This program is licensed "as is" without any 
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef LINUX_DMAPOOL_H
+#define	LINUX_DMAPOOL_H
+
+#include <asm/io.h>
+#include <asm/scatterlist.h>
+
+struct dma_pool *dma_pool_create(const char *name, struct device *dev, 
+			size_t size, size_t align, size_t allocation);
+
+void dma_pool_destroy(struct dma_pool *pool);
+
+void *dma_pool_alloc(struct dma_pool *pool, gfp_t mem_flags,
+		     dma_addr_t *handle);
+
+void dma_pool_free(struct dma_pool *pool, void *vaddr, dma_addr_t addr);
+
+/*
+ * Managed DMA pool
+ */
+struct dma_pool *dmam_pool_create(const char *name, struct device *dev,
+				  size_t size, size_t align, size_t allocation);
+void dmam_pool_destroy(struct dma_pool *pool);
+
+#endif
+
diff --git a/include/linux/dmar.h b/include/linux/dmar.h
new file mode 100644
index 00000000..731a6097
--- /dev/null
+++ b/include/linux/dmar.h
@@ -0,0 +1,264 @@
+/*
+ * Copyright (c) 2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * Copyright (C) Ashok Raj <ashok.raj@intel.com>
+ * Copyright (C) Shaohua Li <shaohua.li@intel.com>
+ */
+
+#ifndef __DMAR_H__
+#define __DMAR_H__
+
+#include <linux/acpi.h>
+#include <linux/types.h>
+#include <linux/msi.h>
+#include <linux/irqreturn.h>
+
+struct acpi_dmar_header;
+
+/* DMAR Flags */
+#define DMAR_INTR_REMAP		0x1
+#define DMAR_X2APIC_OPT_OUT	0x2
+
+struct intel_iommu;
+#ifdef CONFIG_DMAR_TABLE
+extern struct acpi_table_header *dmar_tbl;
+struct dmar_drhd_unit {
+	struct list_head list;		/* list of drhd units	*/
+	struct  acpi_dmar_header *hdr;	/* ACPI header		*/
+	u64	reg_base_addr;		/* register base address*/
+	struct	pci_dev **devices; 	/* target device array	*/
+	int	devices_cnt;		/* target device count	*/
+	u16	segment;		/* PCI domain		*/
+	u8	ignored:1; 		/* ignore drhd		*/
+	u8	include_all:1;
+	struct intel_iommu *iommu;
+};
+
+extern struct list_head dmar_drhd_units;
+
+#define for_each_drhd_unit(drhd) \
+	list_for_each_entry(drhd, &dmar_drhd_units, list)
+
+#define for_each_active_iommu(i, drhd)					\
+	list_for_each_entry(drhd, &dmar_drhd_units, list)		\
+		if (i=drhd->iommu, drhd->ignored) {} else
+
+#define for_each_iommu(i, drhd)						\
+	list_for_each_entry(drhd, &dmar_drhd_units, list)		\
+		if (i=drhd->iommu, 0) {} else 
+
+extern int dmar_table_init(void);
+extern int dmar_dev_scope_init(void);
+
+/* Intel IOMMU detection */
+extern int detect_intel_iommu(void);
+extern int enable_drhd_fault_handling(void);
+
+extern int parse_ioapics_under_ir(void);
+extern int alloc_iommu(struct dmar_drhd_unit *);
+#else
+static inline int detect_intel_iommu(void)
+{
+	return -ENODEV;
+}
+
+static inline int dmar_table_init(void)
+{
+	return -ENODEV;
+}
+static inline int enable_drhd_fault_handling(void)
+{
+	return -1;
+}
+#endif /* !CONFIG_DMAR_TABLE */
+
+struct irte {
+	union {
+		struct {
+			__u64	present 	: 1,
+				fpd		: 1,
+				dst_mode	: 1,
+				redir_hint	: 1,
+				trigger_mode	: 1,
+				dlvry_mode	: 3,
+				avail		: 4,
+				__reserved_1	: 4,
+				vector		: 8,
+				__reserved_2	: 8,
+				dest_id		: 32;
+		};
+		__u64 low;
+	};
+
+	union {
+		struct {
+			__u64	sid		: 16,
+				sq		: 2,
+				svt		: 2,
+				__reserved_3	: 44;
+		};
+		__u64 high;
+	};
+};
+
+#ifdef CONFIG_IRQ_REMAP
+extern int intr_remapping_enabled;
+extern int intr_remapping_supported(void);
+extern int enable_intr_remapping(void);
+extern void disable_intr_remapping(void);
+extern int reenable_intr_remapping(int);
+
+extern int get_irte(int irq, struct irte *entry);
+extern int modify_irte(int irq, struct irte *irte_modified);
+extern int alloc_irte(struct intel_iommu *iommu, int irq, u16 count);
+extern int set_irte_irq(int irq, struct intel_iommu *iommu, u16 index,
+   			u16 sub_handle);
+extern int map_irq_to_irte_handle(int irq, u16 *sub_handle);
+extern int free_irte(int irq);
+
+extern struct intel_iommu *map_dev_to_ir(struct pci_dev *dev);
+extern struct intel_iommu *map_ioapic_to_ir(int apic);
+extern struct intel_iommu *map_hpet_to_ir(u8 id);
+extern int set_ioapic_sid(struct irte *irte, int apic);
+extern int set_hpet_sid(struct irte *irte, u8 id);
+extern int set_msi_sid(struct irte *irte, struct pci_dev *dev);
+#else
+static inline int alloc_irte(struct intel_iommu *iommu, int irq, u16 count)
+{
+	return -1;
+}
+static inline int modify_irte(int irq, struct irte *irte_modified)
+{
+	return -1;
+}
+static inline int free_irte(int irq)
+{
+	return -1;
+}
+static inline int map_irq_to_irte_handle(int irq, u16 *sub_handle)
+{
+	return -1;
+}
+static inline int set_irte_irq(int irq, struct intel_iommu *iommu, u16 index,
+			       u16 sub_handle)
+{
+	return -1;
+}
+static inline struct intel_iommu *map_dev_to_ir(struct pci_dev *dev)
+{
+	return NULL;
+}
+static inline struct intel_iommu *map_ioapic_to_ir(int apic)
+{
+	return NULL;
+}
+static inline struct intel_iommu *map_hpet_to_ir(unsigned int hpet_id)
+{
+	return NULL;
+}
+static inline int set_ioapic_sid(struct irte *irte, int apic)
+{
+	return 0;
+}
+static inline int set_hpet_sid(struct irte *irte, u8 id)
+{
+	return -1;
+}
+static inline int set_msi_sid(struct irte *irte, struct pci_dev *dev)
+{
+	return 0;
+}
+
+#define intr_remapping_enabled		(0)
+
+static inline int enable_intr_remapping(void)
+{
+	return -1;
+}
+
+static inline void disable_intr_remapping(void)
+{
+}
+
+static inline int reenable_intr_remapping(int eim)
+{
+	return 0;
+}
+#endif
+
+enum {
+	IRQ_REMAP_XAPIC_MODE,
+	IRQ_REMAP_X2APIC_MODE,
+};
+
+/* Can't use the common MSI interrupt functions
+ * since DMAR is not a pci device
+ */
+struct irq_data;
+extern void dmar_msi_unmask(struct irq_data *data);
+extern void dmar_msi_mask(struct irq_data *data);
+extern void dmar_msi_read(int irq, struct msi_msg *msg);
+extern void dmar_msi_write(int irq, struct msi_msg *msg);
+extern int dmar_set_interrupt(struct intel_iommu *iommu);
+extern irqreturn_t dmar_fault(int irq, void *dev_id);
+extern int arch_setup_dmar_msi(unsigned int irq);
+
+#ifdef CONFIG_INTEL_IOMMU
+extern int iommu_detected, no_iommu;
+extern struct list_head dmar_rmrr_units;
+struct dmar_rmrr_unit {
+	struct list_head list;		/* list of rmrr units	*/
+	struct acpi_dmar_header *hdr;	/* ACPI header		*/
+	u64	base_address;		/* reserved base address*/
+	u64	end_address;		/* reserved end address */
+	struct pci_dev **devices;	/* target devices */
+	int	devices_cnt;		/* target device count */
+};
+
+#define for_each_rmrr_units(rmrr) \
+	list_for_each_entry(rmrr, &dmar_rmrr_units, list)
+
+struct dmar_atsr_unit {
+	struct list_head list;		/* list of ATSR units */
+	struct acpi_dmar_header *hdr;	/* ACPI header */
+	struct pci_dev **devices;	/* target devices */
+	int devices_cnt;		/* target device count */
+	u8 include_all:1;		/* include all ports */
+};
+
+int dmar_parse_rmrr_atsr_dev(void);
+extern int dmar_parse_one_rmrr(struct acpi_dmar_header *header);
+extern int dmar_parse_one_atsr(struct acpi_dmar_header *header);
+extern int dmar_parse_dev_scope(void *start, void *end, int *cnt,
+				struct pci_dev ***devices, u16 segment);
+extern int intel_iommu_init(void);
+#else /* !CONFIG_INTEL_IOMMU: */
+static inline int intel_iommu_init(void) { return -ENODEV; }
+static inline int dmar_parse_one_rmrr(struct acpi_dmar_header *header)
+{
+	return 0;
+}
+static inline int dmar_parse_one_atsr(struct acpi_dmar_header *header)
+{
+	return 0;
+}
+static inline int dmar_parse_rmrr_atsr_dev(void)
+{
+	return 0;
+}
+#endif /* CONFIG_INTEL_IOMMU */
+
+#endif /* __DMAR_H__ */
diff --git a/include/linux/dmi.h b/include/linux/dmi.h
new file mode 100644
index 00000000..f156cca2
--- /dev/null
+++ b/include/linux/dmi.h
@@ -0,0 +1,139 @@
+#ifndef __DMI_H__
+#define __DMI_H__
+
+#include <linux/list.h>
+#include <linux/mod_devicetable.h>
+
+/* enum dmi_field is in mod_devicetable.h */
+
+enum dmi_device_type {
+	DMI_DEV_TYPE_ANY = 0,
+	DMI_DEV_TYPE_OTHER,
+	DMI_DEV_TYPE_UNKNOWN,
+	DMI_DEV_TYPE_VIDEO,
+	DMI_DEV_TYPE_SCSI,
+	DMI_DEV_TYPE_ETHERNET,
+	DMI_DEV_TYPE_TOKENRING,
+	DMI_DEV_TYPE_SOUND,
+	DMI_DEV_TYPE_PATA,
+	DMI_DEV_TYPE_SATA,
+	DMI_DEV_TYPE_SAS,
+	DMI_DEV_TYPE_IPMI = -1,
+	DMI_DEV_TYPE_OEM_STRING = -2,
+	DMI_DEV_TYPE_DEV_ONBOARD = -3,
+};
+
+enum dmi_entry_type {
+	DMI_ENTRY_BIOS = 0,
+	DMI_ENTRY_SYSTEM,
+	DMI_ENTRY_BASEBOARD,
+	DMI_ENTRY_CHASSIS,
+	DMI_ENTRY_PROCESSOR,
+	DMI_ENTRY_MEM_CONTROLLER,
+	DMI_ENTRY_MEM_MODULE,
+	DMI_ENTRY_CACHE,
+	DMI_ENTRY_PORT_CONNECTOR,
+	DMI_ENTRY_SYSTEM_SLOT,
+	DMI_ENTRY_ONBOARD_DEVICE,
+	DMI_ENTRY_OEMSTRINGS,
+	DMI_ENTRY_SYSCONF,
+	DMI_ENTRY_BIOS_LANG,
+	DMI_ENTRY_GROUP_ASSOC,
+	DMI_ENTRY_SYSTEM_EVENT_LOG,
+	DMI_ENTRY_PHYS_MEM_ARRAY,
+	DMI_ENTRY_MEM_DEVICE,
+	DMI_ENTRY_32_MEM_ERROR,
+	DMI_ENTRY_MEM_ARRAY_MAPPED_ADDR,
+	DMI_ENTRY_MEM_DEV_MAPPED_ADDR,
+	DMI_ENTRY_BUILTIN_POINTING_DEV,
+	DMI_ENTRY_PORTABLE_BATTERY,
+	DMI_ENTRY_SYSTEM_RESET,
+	DMI_ENTRY_HW_SECURITY,
+	DMI_ENTRY_SYSTEM_POWER_CONTROLS,
+	DMI_ENTRY_VOLTAGE_PROBE,
+	DMI_ENTRY_COOLING_DEV,
+	DMI_ENTRY_TEMP_PROBE,
+	DMI_ENTRY_ELECTRICAL_CURRENT_PROBE,
+	DMI_ENTRY_OOB_REMOTE_ACCESS,
+	DMI_ENTRY_BIS_ENTRY,
+	DMI_ENTRY_SYSTEM_BOOT,
+	DMI_ENTRY_MGMT_DEV,
+	DMI_ENTRY_MGMT_DEV_COMPONENT,
+	DMI_ENTRY_MGMT_DEV_THRES,
+	DMI_ENTRY_MEM_CHANNEL,
+	DMI_ENTRY_IPMI_DEV,
+	DMI_ENTRY_SYS_POWER_SUPPLY,
+	DMI_ENTRY_ADDITIONAL,
+	DMI_ENTRY_ONBOARD_DEV_EXT,
+	DMI_ENTRY_MGMT_CONTROLLER_HOST,
+	DMI_ENTRY_INACTIVE = 126,
+	DMI_ENTRY_END_OF_TABLE = 127,
+};
+
+struct dmi_header {
+	u8 type;
+	u8 length;
+	u16 handle;
+};
+
+struct dmi_device {
+	struct list_head list;
+	int type;
+	const char *name;
+	void *device_data;	/* Type specific data */
+};
+
+#ifdef CONFIG_DMI
+
+struct dmi_dev_onboard {
+	struct dmi_device dev;
+	int instance;
+	int segment;
+	int bus;
+	int devfn;
+};
+
+extern int dmi_check_system(const struct dmi_system_id *list);
+const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list);
+extern const char * dmi_get_system_info(int field);
+extern const struct dmi_device * dmi_find_device(int type, const char *name,
+	const struct dmi_device *from);
+extern void dmi_scan_machine(void);
+extern bool dmi_get_date(int field, int *yearp, int *monthp, int *dayp);
+extern int dmi_name_in_vendors(const char *str);
+extern int dmi_name_in_serial(const char *str);
+extern int dmi_available;
+extern int dmi_walk(void (*decode)(const struct dmi_header *, void *),
+	void *private_data);
+extern bool dmi_match(enum dmi_field f, const char *str);
+
+#else
+
+static inline int dmi_check_system(const struct dmi_system_id *list) { return 0; }
+static inline const char * dmi_get_system_info(int field) { return NULL; }
+static inline const struct dmi_device * dmi_find_device(int type, const char *name,
+	const struct dmi_device *from) { return NULL; }
+static inline void dmi_scan_machine(void) { return; }
+static inline bool dmi_get_date(int field, int *yearp, int *monthp, int *dayp)
+{
+	if (yearp)
+		*yearp = 0;
+	if (monthp)
+		*monthp = 0;
+	if (dayp)
+		*dayp = 0;
+	return false;
+}
+static inline int dmi_name_in_vendors(const char *s) { return 0; }
+static inline int dmi_name_in_serial(const char *s) { return 0; }
+#define dmi_available 0
+static inline int dmi_walk(void (*decode)(const struct dmi_header *, void *),
+	void *private_data) { return -1; }
+static inline bool dmi_match(enum dmi_field f, const char *str)
+	{ return false; }
+static inline const struct dmi_system_id *
+	dmi_first_match(const struct dmi_system_id *list) { return NULL; }
+
+#endif
+
+#endif	/* __DMI_H__ */
diff --git a/include/linux/dn.h b/include/linux/dn.h
new file mode 100644
index 00000000..9c504454
--- /dev/null
+++ b/include/linux/dn.h
@@ -0,0 +1,146 @@
+#ifndef _LINUX_DN_H
+#define _LINUX_DN_H
+
+#include <linux/types.h>
+
+/*
+
+	DECnet Data Structures and Constants
+
+*/
+
+/* 
+ * DNPROTO_NSP can't be the same as SOL_SOCKET, 
+ * so increment each by one (compared to ULTRIX)
+ */
+#define DNPROTO_NSP     2                       /* NSP protocol number       */
+#define DNPROTO_ROU     3                       /* Routing protocol number   */
+#define DNPROTO_NML     4                       /* Net mgt protocol number   */
+#define DNPROTO_EVL     5                       /* Evl protocol number (usr) */
+#define DNPROTO_EVR     6                       /* Evl protocol number (evl) */
+#define DNPROTO_NSPT    7                       /* NSP trace protocol number */
+
+
+#define DN_ADDL		2
+#define DN_MAXADDL	2 /* ULTRIX headers have 20 here, but pathworks has 2 */
+#define DN_MAXOPTL	16
+#define DN_MAXOBJL	16
+#define DN_MAXACCL	40
+#define DN_MAXALIASL	128
+#define DN_MAXNODEL	256
+#define DNBUFSIZE	65023
+
+/* 
+ * SET/GET Socket options  - must match the DSO_ numbers below
+ */
+#define SO_CONDATA      1
+#define SO_CONACCESS    2
+#define SO_PROXYUSR     3
+#define SO_LINKINFO     7
+
+#define DSO_CONDATA     1        /* Set/Get connect data                */
+#define DSO_DISDATA     10       /* Set/Get disconnect data             */
+#define DSO_CONACCESS   2        /* Set/Get connect access data         */
+#define DSO_ACCEPTMODE  4        /* Set/Get accept mode                 */
+#define DSO_CONACCEPT   5        /* Accept deferred connection          */
+#define DSO_CONREJECT   6        /* Reject deferred connection          */
+#define DSO_LINKINFO    7        /* Set/Get link information            */
+#define DSO_STREAM      8        /* Set socket type to stream           */
+#define DSO_SEQPACKET   9        /* Set socket type to sequenced packet */
+#define DSO_MAXWINDOW   11       /* Maximum window size allowed         */
+#define DSO_NODELAY	12       /* Turn off nagle                      */
+#define DSO_CORK        13       /* Wait for more data!                 */
+#define DSO_SERVICES	14       /* NSP Services field                  */
+#define DSO_INFO	15       /* NSP Info field                      */
+#define DSO_MAX         15       /* Maximum option number               */
+
+
+/* LINK States */
+#define LL_INACTIVE	0
+#define LL_CONNECTING	1
+#define LL_RUNNING	2
+#define LL_DISCONNECTING 3
+
+#define ACC_IMMED 0
+#define ACC_DEFER 1
+
+#define SDF_WILD        1                  /* Wild card object          */
+#define SDF_PROXY       2                  /* Addr eligible for proxy   */
+#define SDF_UICPROXY    4                  /* Use uic-based proxy       */
+
+/* Structures */
+
+
+struct dn_naddr {
+	__le16		a_len;
+	__u8 a_addr[DN_MAXADDL]; /* Two bytes little endian */
+};
+
+struct sockaddr_dn {
+	__u16		sdn_family;
+	__u8		sdn_flags;
+	__u8		sdn_objnum;
+	__le16		sdn_objnamel;
+	__u8		sdn_objname[DN_MAXOBJL];
+	struct   dn_naddr	sdn_add;
+};
+#define sdn_nodeaddrl   sdn_add.a_len   /* Node address length  */
+#define sdn_nodeaddr    sdn_add.a_addr  /* Node address         */
+
+
+
+/*
+ * DECnet set/get DSO_CONDATA, DSO_DISDATA (optional data) structure
+ */
+struct optdata_dn {
+        __le16  opt_status;     /* Extended status return */
+#define opt_sts opt_status
+        __le16  opt_optl;       /* Length of user data    */
+        __u8   opt_data[16];   /* User data              */
+};
+
+struct accessdata_dn {
+	__u8		acc_accl;
+	__u8		acc_acc[DN_MAXACCL];
+	__u8 		acc_passl;
+	__u8		acc_pass[DN_MAXACCL];
+	__u8 		acc_userl;
+	__u8		acc_user[DN_MAXACCL];
+};
+
+/*
+ * DECnet logical link information structure
+ */
+struct linkinfo_dn {
+        __u16  idn_segsize;    /* Segment size for link */
+        __u8   idn_linkstate;  /* Logical link state    */
+};
+
+/*
+ * Ethernet address format (for DECnet)
+ */
+union etheraddress {
+        __u8 dne_addr[6];             /* Full ethernet address */
+  struct {
+                __u8 dne_hiord[4];    /* DECnet HIORD prefix   */
+                __u8 dne_nodeaddr[2]; /* DECnet node address   */
+  } dne_remote;
+};
+
+
+/*
+ * DECnet physical socket address format
+ */
+struct dn_addr {
+        __le16 dna_family;      /* AF_DECnet               */
+        union etheraddress dna_netaddr; /* DECnet ethernet address */
+};
+
+#define DECNET_IOCTL_BASE 0x89 /* PROTOPRIVATE range */
+
+#define SIOCSNETADDR  _IOW(DECNET_IOCTL_BASE, 0xe0, struct dn_naddr)
+#define SIOCGNETADDR  _IOR(DECNET_IOCTL_BASE, 0xe1, struct dn_naddr)
+#define OSIOCSNETADDR _IOW(DECNET_IOCTL_BASE, 0xe0, int)
+#define OSIOCGNETADDR _IOR(DECNET_IOCTL_BASE, 0xe1, int)
+
+#endif /* _LINUX_DN_H */
diff --git a/include/linux/dnotify.h b/include/linux/dnotify.h
new file mode 100644
index 00000000..3290555a
--- /dev/null
+++ b/include/linux/dnotify.h
@@ -0,0 +1,50 @@
+#ifndef _LINUX_DNOTIFY_H
+#define _LINUX_DNOTIFY_H
+/*
+ * Directory notification for Linux
+ *
+ * Copyright (C) 2000,2002 Stephen Rothwell
+ */
+
+#include <linux/fs.h>
+
+struct dnotify_struct {
+	struct dnotify_struct *	dn_next;
+	__u32			dn_mask;
+	int			dn_fd;
+	struct file *		dn_filp;
+	fl_owner_t		dn_owner;
+};
+
+#ifdef __KERNEL__
+
+
+#ifdef CONFIG_DNOTIFY
+
+#define DNOTIFY_ALL_EVENTS (FS_DELETE | FS_DELETE_CHILD |\
+			    FS_MODIFY | FS_MODIFY_CHILD |\
+			    FS_ACCESS | FS_ACCESS_CHILD |\
+			    FS_ATTRIB | FS_ATTRIB_CHILD |\
+			    FS_CREATE | FS_DN_RENAME |\
+			    FS_MOVED_FROM | FS_MOVED_TO)
+
+extern int dir_notify_enable;
+extern void dnotify_flush(struct file *, fl_owner_t);
+extern int fcntl_dirnotify(int, struct file *, unsigned long);
+
+#else
+
+static inline void dnotify_flush(struct file *filp, fl_owner_t id)
+{
+}
+
+static inline int fcntl_dirnotify(int fd, struct file *filp, unsigned long arg)
+{
+	return -EINVAL;
+}
+
+#endif /* CONFIG_DNOTIFY */
+
+#endif /* __KERNEL __ */
+
+#endif /* _LINUX_DNOTIFY_H */
diff --git a/include/linux/dns_resolver.h b/include/linux/dns_resolver.h
new file mode 100644
index 00000000..cc92268a
--- /dev/null
+++ b/include/linux/dns_resolver.h
@@ -0,0 +1,34 @@
+/*
+ *   DNS Resolver upcall management for CIFS DFS and AFS
+ *   Handles host name to IP address resolution and DNS query for AFSDB RR.
+ *
+ *   Copyright (c) International Business Machines  Corp., 2008
+ *   Author(s): Steve French (sfrench@us.ibm.com)
+ *              Wang Lei (wang840925@gmail.com)
+ *
+ *   This library is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU Lesser General Public License as published
+ *   by the Free Software Foundation; either version 2.1 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This library is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ *   the GNU Lesser General Public License for more details.
+ *
+ *   You should have received a copy of the GNU Lesser General Public License
+ *   along with this library; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _LINUX_DNS_RESOLVER_H
+#define _LINUX_DNS_RESOLVER_H
+
+#ifdef __KERNEL__
+
+extern int dns_query(const char *type, const char *name, size_t namelen,
+		     const char *options, char **_result, time_t *_expiry);
+
+#endif /* KERNEL */
+
+#endif /* _LINUX_DNS_RESOLVER_H */
diff --git a/include/linux/dqblk_qtree.h b/include/linux/dqblk_qtree.h
new file mode 100644
index 00000000..82a16527
--- /dev/null
+++ b/include/linux/dqblk_qtree.h
@@ -0,0 +1,56 @@
+/*
+ *	Definitions of structures and functions for quota formats using trie
+ */
+
+#ifndef _LINUX_DQBLK_QTREE_H
+#define _LINUX_DQBLK_QTREE_H
+
+#include <linux/types.h>
+
+/* Numbers of blocks needed for updates - we count with the smallest
+ * possible block size (1024) */
+#define QTREE_INIT_ALLOC 4
+#define QTREE_INIT_REWRITE 2
+#define QTREE_DEL_ALLOC 0
+#define QTREE_DEL_REWRITE 6
+
+struct dquot;
+
+/* Operations */
+struct qtree_fmt_operations {
+	void (*mem2disk_dqblk)(void *disk, struct dquot *dquot);	/* Convert given entry from in memory format to disk one */
+	void (*disk2mem_dqblk)(struct dquot *dquot, void *disk);	/* Convert given entry from disk format to in memory one */
+	int (*is_id)(void *disk, struct dquot *dquot);	/* Is this structure for given id? */
+};
+
+/* Inmemory copy of version specific information */
+struct qtree_mem_dqinfo {
+	struct super_block *dqi_sb;	/* Sb quota is on */
+	int dqi_type;			/* Quota type */
+	unsigned int dqi_blocks;	/* # of blocks in quota file */
+	unsigned int dqi_free_blk;	/* First block in list of free blocks */
+	unsigned int dqi_free_entry;	/* First block with free entry */
+	unsigned int dqi_blocksize_bits;	/* Block size of quota file */
+	unsigned int dqi_entry_size;	/* Size of quota entry in quota file */
+	unsigned int dqi_usable_bs;	/* Space usable in block for quota data */
+	unsigned int dqi_qtree_depth;	/* Precomputed depth of quota tree */
+	struct qtree_fmt_operations *dqi_ops;	/* Operations for entry manipulation */
+};
+
+int qtree_write_dquot(struct qtree_mem_dqinfo *info, struct dquot *dquot);
+int qtree_read_dquot(struct qtree_mem_dqinfo *info, struct dquot *dquot);
+int qtree_delete_dquot(struct qtree_mem_dqinfo *info, struct dquot *dquot);
+int qtree_release_dquot(struct qtree_mem_dqinfo *info, struct dquot *dquot);
+int qtree_entry_unused(struct qtree_mem_dqinfo *info, char *disk);
+static inline int qtree_depth(struct qtree_mem_dqinfo *info)
+{
+	unsigned int epb = info->dqi_usable_bs >> 2;
+	unsigned long long entries = epb;
+	int i;
+
+	for (i = 1; entries < (1ULL << 32); i++)
+		entries *= epb;
+	return i;
+}
+
+#endif /* _LINUX_DQBLK_QTREE_H */
diff --git a/include/linux/dqblk_v1.h b/include/linux/dqblk_v1.h
new file mode 100644
index 00000000..3713a723
--- /dev/null
+++ b/include/linux/dqblk_v1.h
@@ -0,0 +1,17 @@
+/*
+ *	File with in-memory structures of old quota format
+ */
+
+#ifndef _LINUX_DQBLK_V1_H
+#define _LINUX_DQBLK_V1_H
+
+/* Root squash turned on */
+#define V1_DQF_RSQUASH 1
+
+/* Numbers of blocks needed for updates */
+#define V1_INIT_ALLOC 1
+#define V1_INIT_REWRITE 1
+#define V1_DEL_ALLOC 0
+#define V1_DEL_REWRITE 2
+
+#endif	/* _LINUX_DQBLK_V1_H */
diff --git a/include/linux/dqblk_v2.h b/include/linux/dqblk_v2.h
new file mode 100644
index 00000000..18000a54
--- /dev/null
+++ b/include/linux/dqblk_v2.h
@@ -0,0 +1,16 @@
+/*
+ *  Definitions for vfsv0 quota format
+ */
+
+#ifndef _LINUX_DQBLK_V2_H
+#define _LINUX_DQBLK_V2_H
+
+#include <linux/dqblk_qtree.h>
+
+/* Numbers of blocks needed for updates */
+#define V2_INIT_ALLOC QTREE_INIT_ALLOC
+#define V2_INIT_REWRITE QTREE_INIT_REWRITE
+#define V2_DEL_ALLOC QTREE_DEL_ALLOC
+#define V2_DEL_REWRITE QTREE_DEL_REWRITE
+
+#endif /* _LINUX_DQBLK_V2_H */
diff --git a/include/linux/dqblk_xfs.h b/include/linux/dqblk_xfs.h
new file mode 100644
index 00000000..86552807
--- /dev/null
+++ b/include/linux/dqblk_xfs.h
@@ -0,0 +1,166 @@
+/*
+ * Copyright (c) 1995-2001,2004 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesset General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#ifndef _LINUX_DQBLK_XFS_H
+#define _LINUX_DQBLK_XFS_H
+
+#include <linux/types.h>
+
+/*
+ * Disk quota - quotactl(2) commands for the XFS Quota Manager (XQM).
+ */
+
+#define XQM_CMD(x)	(('X'<<8)+(x))	/* note: forms first QCMD argument */
+#define XQM_COMMAND(x)	(((x) & (0xff<<8)) == ('X'<<8))	/* test if for XFS */
+
+#define XQM_USRQUOTA	0	/* system call user quota type */
+#define XQM_GRPQUOTA	1	/* system call group quota type */
+#define XQM_PRJQUOTA	2	/* system call project quota type */
+#define XQM_MAXQUOTAS	3
+
+#define Q_XQUOTAON	XQM_CMD(1)	/* enable accounting/enforcement */
+#define Q_XQUOTAOFF	XQM_CMD(2)	/* disable accounting/enforcement */
+#define Q_XGETQUOTA	XQM_CMD(3)	/* get disk limits and usage */
+#define Q_XSETQLIM	XQM_CMD(4)	/* set disk limits */
+#define Q_XGETQSTAT	XQM_CMD(5)	/* get quota subsystem status */
+#define Q_XQUOTARM	XQM_CMD(6)	/* free disk space used by dquots */
+#define Q_XQUOTASYNC	XQM_CMD(7)	/* delalloc flush, updates dquots */
+
+/*
+ * fs_disk_quota structure:
+ *
+ * This contains the current quota information regarding a user/proj/group.
+ * It is 64-bit aligned, and all the blk units are in BBs (Basic Blocks) of
+ * 512 bytes.
+ */
+#define FS_DQUOT_VERSION	1	/* fs_disk_quota.d_version */
+typedef struct fs_disk_quota {
+	__s8		d_version;	/* version of this structure */
+	__s8		d_flags;	/* FS_{USER,PROJ,GROUP}_QUOTA */
+	__u16		d_fieldmask;	/* field specifier */
+	__u32		d_id;		/* user, project, or group ID */
+	__u64		d_blk_hardlimit;/* absolute limit on disk blks */
+	__u64		d_blk_softlimit;/* preferred limit on disk blks */
+	__u64		d_ino_hardlimit;/* maximum # allocated inodes */
+	__u64		d_ino_softlimit;/* preferred inode limit */
+	__u64		d_bcount;	/* # disk blocks owned by the user */
+	__u64		d_icount;	/* # inodes owned by the user */
+	__s32		d_itimer;	/* zero if within inode limits */
+					/* if not, we refuse service */
+	__s32		d_btimer;	/* similar to above; for disk blocks */
+	__u16	  	d_iwarns;       /* # warnings issued wrt num inodes */
+	__u16	  	d_bwarns;       /* # warnings issued wrt disk blocks */
+	__s32		d_padding2;	/* padding2 - for future use */
+	__u64		d_rtb_hardlimit;/* absolute limit on realtime blks */
+	__u64		d_rtb_softlimit;/* preferred limit on RT disk blks */
+	__u64		d_rtbcount;	/* # realtime blocks owned */
+	__s32		d_rtbtimer;	/* similar to above; for RT disk blks */
+	__u16	  	d_rtbwarns;     /* # warnings issued wrt RT disk blks */
+	__s16		d_padding3;	/* padding3 - for future use */	
+	char		d_padding4[8];	/* yet more padding */
+} fs_disk_quota_t;
+
+/*
+ * These fields are sent to Q_XSETQLIM to specify fields that need to change.
+ */
+#define FS_DQ_ISOFT	(1<<0)
+#define FS_DQ_IHARD	(1<<1)
+#define FS_DQ_BSOFT	(1<<2)
+#define FS_DQ_BHARD 	(1<<3)
+#define FS_DQ_RTBSOFT	(1<<4)
+#define FS_DQ_RTBHARD	(1<<5)
+#define FS_DQ_LIMIT_MASK	(FS_DQ_ISOFT | FS_DQ_IHARD | FS_DQ_BSOFT | \
+				 FS_DQ_BHARD | FS_DQ_RTBSOFT | FS_DQ_RTBHARD)
+/*
+ * These timers can only be set in super user's dquot. For others, timers are
+ * automatically started and stopped. Superusers timer values set the limits
+ * for the rest.  In case these values are zero, the DQ_{F,B}TIMELIMIT values
+ * defined below are used. 
+ * These values also apply only to the d_fieldmask field for Q_XSETQLIM.
+ */
+#define FS_DQ_BTIMER	(1<<6)
+#define FS_DQ_ITIMER	(1<<7)
+#define FS_DQ_RTBTIMER 	(1<<8)
+#define FS_DQ_TIMER_MASK	(FS_DQ_BTIMER | FS_DQ_ITIMER | FS_DQ_RTBTIMER)
+
+/*
+ * Warning counts are set in both super user's dquot and others. For others,
+ * warnings are set/cleared by the administrators (or automatically by going
+ * below the soft limit).  Superusers warning values set the warning limits
+ * for the rest.  In case these values are zero, the DQ_{F,B}WARNLIMIT values
+ * defined below are used. 
+ * These values also apply only to the d_fieldmask field for Q_XSETQLIM.
+ */
+#define FS_DQ_BWARNS	(1<<9)
+#define FS_DQ_IWARNS	(1<<10)
+#define FS_DQ_RTBWARNS	(1<<11)
+#define FS_DQ_WARNS_MASK	(FS_DQ_BWARNS | FS_DQ_IWARNS | FS_DQ_RTBWARNS)
+
+/*
+ * Accounting values.  These can only be set for filesystem with
+ * non-transactional quotas that require quotacheck(8) in userspace.
+ */
+#define FS_DQ_BCOUNT		(1<<12)
+#define FS_DQ_ICOUNT		(1<<13)
+#define FS_DQ_RTBCOUNT		(1<<14)
+#define FS_DQ_ACCT_MASK		(FS_DQ_BCOUNT | FS_DQ_ICOUNT | FS_DQ_RTBCOUNT)
+
+/*
+ * Various flags related to quotactl(2).
+ */
+#define FS_QUOTA_UDQ_ACCT	(1<<0)  /* user quota accounting */
+#define FS_QUOTA_UDQ_ENFD	(1<<1)  /* user quota limits enforcement */
+#define FS_QUOTA_GDQ_ACCT	(1<<2)  /* group quota accounting */
+#define FS_QUOTA_GDQ_ENFD	(1<<3)  /* group quota limits enforcement */
+#define FS_QUOTA_PDQ_ACCT	(1<<4)  /* project quota accounting */
+#define FS_QUOTA_PDQ_ENFD	(1<<5)  /* project quota limits enforcement */
+
+#define FS_USER_QUOTA		(1<<0)	/* user quota type */
+#define FS_PROJ_QUOTA		(1<<1)	/* project quota type */
+#define FS_GROUP_QUOTA		(1<<2)	/* group quota type */
+
+/*
+ * fs_quota_stat is the struct returned in Q_XGETQSTAT for a given file system.
+ * Provides a centralized way to get meta information about the quota subsystem.
+ * eg. space taken up for user and group quotas, number of dquots currently
+ * incore.
+ */
+#define FS_QSTAT_VERSION	1	/* fs_quota_stat.qs_version */
+
+/*
+ * Some basic information about 'quota files'.
+ */
+typedef struct fs_qfilestat {
+	__u64		qfs_ino;	/* inode number */
+	__u64		qfs_nblks;	/* number of BBs 512-byte-blks */
+	__u32		qfs_nextents;	/* number of extents */
+} fs_qfilestat_t;
+
+typedef struct fs_quota_stat {
+	__s8		qs_version;	/* version number for future changes */
+	__u16		qs_flags;	/* FS_QUOTA_{U,P,G}DQ_{ACCT,ENFD} */
+	__s8		qs_pad;		/* unused */
+	fs_qfilestat_t	qs_uquota;	/* user quota storage information */
+	fs_qfilestat_t	qs_gquota;	/* group quota storage information */
+	__u32		qs_incoredqs;	/* number of dquots incore */
+	__s32		qs_btimelimit;  /* limit for blks timer */	
+	__s32		qs_itimelimit;  /* limit for inodes timer */	
+	__s32		qs_rtbtimelimit;/* limit for rt blks timer */	
+	__u16		qs_bwarnlimit;	/* limit for num warnings */
+	__u16		qs_iwarnlimit;	/* limit for num warnings */
+} fs_quota_stat_t;
+
+#endif	/* _LINUX_DQBLK_XFS_H */
diff --git a/include/linux/drbd.h b/include/linux/drbd.h
new file mode 100644
index 00000000..9e5f5607
--- /dev/null
+++ b/include/linux/drbd.h
@@ -0,0 +1,369 @@
+/*
+  drbd.h
+  Kernel module for 2.6.x Kernels
+
+  This file is part of DRBD by Philipp Reisner and Lars Ellenberg.
+
+  Copyright (C) 2001-2008, LINBIT Information Technologies GmbH.
+  Copyright (C) 2001-2008, Philipp Reisner <philipp.reisner@linbit.com>.
+  Copyright (C) 2001-2008, Lars Ellenberg <lars.ellenberg@linbit.com>.
+
+  drbd is free software; you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation; either version 2, or (at your option)
+  any later version.
+
+  drbd is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with drbd; see the file COPYING.  If not, write to
+  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+#ifndef DRBD_H
+#define DRBD_H
+#include <linux/connector.h>
+#include <asm/types.h>
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#else
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <limits.h>
+
+/* Although the Linux source code makes a difference between
+   generic endianness and the bitfields' endianness, there is no
+   architecture as of Linux-2.6.24-rc4 where the bitfields' endianness
+   does not match the generic endianness. */
+
+#if __BYTE_ORDER == __LITTLE_ENDIAN
+#define __LITTLE_ENDIAN_BITFIELD
+#elif __BYTE_ORDER == __BIG_ENDIAN
+#define __BIG_ENDIAN_BITFIELD
+#else
+# error "sorry, weird endianness on this box"
+#endif
+
+#endif
+
+
+extern const char *drbd_buildtag(void);
+#define REL_VERSION "8.3.11"
+#define API_VERSION 88
+#define PRO_VERSION_MIN 86
+#define PRO_VERSION_MAX 96
+
+
+enum drbd_io_error_p {
+	EP_PASS_ON, /* FIXME should the better be named "Ignore"? */
+	EP_CALL_HELPER,
+	EP_DETACH
+};
+
+enum drbd_fencing_p {
+	FP_DONT_CARE,
+	FP_RESOURCE,
+	FP_STONITH
+};
+
+enum drbd_disconnect_p {
+	DP_RECONNECT,
+	DP_DROP_NET_CONF,
+	DP_FREEZE_IO
+};
+
+enum drbd_after_sb_p {
+	ASB_DISCONNECT,
+	ASB_DISCARD_YOUNGER_PRI,
+	ASB_DISCARD_OLDER_PRI,
+	ASB_DISCARD_ZERO_CHG,
+	ASB_DISCARD_LEAST_CHG,
+	ASB_DISCARD_LOCAL,
+	ASB_DISCARD_REMOTE,
+	ASB_CONSENSUS,
+	ASB_DISCARD_SECONDARY,
+	ASB_CALL_HELPER,
+	ASB_VIOLENTLY
+};
+
+enum drbd_on_no_data {
+	OND_IO_ERROR,
+	OND_SUSPEND_IO
+};
+
+enum drbd_on_congestion {
+	OC_BLOCK,
+	OC_PULL_AHEAD,
+	OC_DISCONNECT,
+};
+
+/* KEEP the order, do not delete or insert. Only append. */
+enum drbd_ret_code {
+	ERR_CODE_BASE		= 100,
+	NO_ERROR		= 101,
+	ERR_LOCAL_ADDR		= 102,
+	ERR_PEER_ADDR		= 103,
+	ERR_OPEN_DISK		= 104,
+	ERR_OPEN_MD_DISK	= 105,
+	ERR_DISK_NOT_BDEV	= 107,
+	ERR_MD_NOT_BDEV		= 108,
+	ERR_DISK_TO_SMALL	= 111,
+	ERR_MD_DISK_TO_SMALL	= 112,
+	ERR_BDCLAIM_DISK	= 114,
+	ERR_BDCLAIM_MD_DISK	= 115,
+	ERR_MD_IDX_INVALID	= 116,
+	ERR_IO_MD_DISK		= 118,
+	ERR_MD_INVALID          = 119,
+	ERR_AUTH_ALG		= 120,
+	ERR_AUTH_ALG_ND		= 121,
+	ERR_NOMEM		= 122,
+	ERR_DISCARD		= 123,
+	ERR_DISK_CONFIGURED	= 124,
+	ERR_NET_CONFIGURED	= 125,
+	ERR_MANDATORY_TAG	= 126,
+	ERR_MINOR_INVALID	= 127,
+	ERR_INTR		= 129, /* EINTR */
+	ERR_RESIZE_RESYNC	= 130,
+	ERR_NO_PRIMARY		= 131,
+	ERR_SYNC_AFTER		= 132,
+	ERR_SYNC_AFTER_CYCLE	= 133,
+	ERR_PAUSE_IS_SET	= 134,
+	ERR_PAUSE_IS_CLEAR	= 135,
+	ERR_PACKET_NR		= 137,
+	ERR_NO_DISK		= 138,
+	ERR_NOT_PROTO_C		= 139,
+	ERR_NOMEM_BITMAP	= 140,
+	ERR_INTEGRITY_ALG	= 141, /* DRBD 8.2 only */
+	ERR_INTEGRITY_ALG_ND	= 142, /* DRBD 8.2 only */
+	ERR_CPU_MASK_PARSE	= 143, /* DRBD 8.2 only */
+	ERR_CSUMS_ALG		= 144, /* DRBD 8.2 only */
+	ERR_CSUMS_ALG_ND	= 145, /* DRBD 8.2 only */
+	ERR_VERIFY_ALG		= 146, /* DRBD 8.2 only */
+	ERR_VERIFY_ALG_ND	= 147, /* DRBD 8.2 only */
+	ERR_CSUMS_RESYNC_RUNNING= 148, /* DRBD 8.2 only */
+	ERR_VERIFY_RUNNING	= 149, /* DRBD 8.2 only */
+	ERR_DATA_NOT_CURRENT	= 150,
+	ERR_CONNECTED		= 151, /* DRBD 8.3 only */
+	ERR_PERM		= 152,
+	ERR_NEED_APV_93		= 153,
+	ERR_STONITH_AND_PROT_A  = 154,
+	ERR_CONG_NOT_PROTO_A	= 155,
+	ERR_PIC_AFTER_DEP	= 156,
+	ERR_PIC_PEER_DEP	= 157,
+
+	/* insert new ones above this line */
+	AFTER_LAST_ERR_CODE
+};
+
+#define DRBD_PROT_A   1
+#define DRBD_PROT_B   2
+#define DRBD_PROT_C   3
+
+enum drbd_role {
+	R_UNKNOWN = 0,
+	R_PRIMARY = 1,     /* role */
+	R_SECONDARY = 2,   /* role */
+	R_MASK = 3,
+};
+
+/* The order of these constants is important.
+ * The lower ones (<C_WF_REPORT_PARAMS) indicate
+ * that there is no socket!
+ * >=C_WF_REPORT_PARAMS ==> There is a socket
+ */
+enum drbd_conns {
+	C_STANDALONE,
+	C_DISCONNECTING,  /* Temporal state on the way to StandAlone. */
+	C_UNCONNECTED,    /* >= C_UNCONNECTED -> inc_net() succeeds */
+
+	/* These temporal states are all used on the way
+	 * from >= C_CONNECTED to Unconnected.
+	 * The 'disconnect reason' states
+	 * I do not allow to change between them. */
+	C_TIMEOUT,
+	C_BROKEN_PIPE,
+	C_NETWORK_FAILURE,
+	C_PROTOCOL_ERROR,
+	C_TEAR_DOWN,
+
+	C_WF_CONNECTION,
+	C_WF_REPORT_PARAMS, /* we have a socket */
+	C_CONNECTED,      /* we have introduced each other */
+	C_STARTING_SYNC_S,  /* starting full sync by admin request. */
+	C_STARTING_SYNC_T,  /* starting full sync by admin request. */
+	C_WF_BITMAP_S,
+	C_WF_BITMAP_T,
+	C_WF_SYNC_UUID,
+
+	/* All SyncStates are tested with this comparison
+	 * xx >= C_SYNC_SOURCE && xx <= C_PAUSED_SYNC_T */
+	C_SYNC_SOURCE,
+	C_SYNC_TARGET,
+	C_VERIFY_S,
+	C_VERIFY_T,
+	C_PAUSED_SYNC_S,
+	C_PAUSED_SYNC_T,
+
+	C_AHEAD,
+	C_BEHIND,
+
+	C_MASK = 31
+};
+
+enum drbd_disk_state {
+	D_DISKLESS,
+	D_ATTACHING,      /* In the process of reading the meta-data */
+	D_FAILED,         /* Becomes D_DISKLESS as soon as we told it the peer */
+			/* when >= D_FAILED it is legal to access mdev->bc */
+	D_NEGOTIATING,    /* Late attaching state, we need to talk to the peer */
+	D_INCONSISTENT,
+	D_OUTDATED,
+	D_UNKNOWN,       /* Only used for the peer, never for myself */
+	D_CONSISTENT,     /* Might be D_OUTDATED, might be D_UP_TO_DATE ... */
+	D_UP_TO_DATE,       /* Only this disk state allows applications' IO ! */
+	D_MASK = 15
+};
+
+union drbd_state {
+/* According to gcc's docs is the ...
+ * The order of allocation of bit-fields within a unit (C90 6.5.2.1, C99 6.7.2.1).
+ * Determined by ABI.
+ * pointed out by Maxim Uvarov q<muvarov@ru.mvista.com>
+ * even though we transmit as "cpu_to_be32(state)",
+ * the offsets of the bitfields still need to be swapped
+ * on different endianness.
+ */
+	struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+		unsigned role:2 ;   /* 3/4	 primary/secondary/unknown */
+		unsigned peer:2 ;   /* 3/4	 primary/secondary/unknown */
+		unsigned conn:5 ;   /* 17/32	 cstates */
+		unsigned disk:4 ;   /* 8/16	 from D_DISKLESS to D_UP_TO_DATE */
+		unsigned pdsk:4 ;   /* 8/16	 from D_DISKLESS to D_UP_TO_DATE */
+		unsigned susp:1 ;   /* 2/2	 IO suspended no/yes (by user) */
+		unsigned aftr_isp:1 ; /* isp .. imposed sync pause */
+		unsigned peer_isp:1 ;
+		unsigned user_isp:1 ;
+		unsigned susp_nod:1 ; /* IO suspended because no data */
+		unsigned susp_fen:1 ; /* IO suspended because fence peer handler runs*/
+		unsigned _pad:9;   /* 0	 unused */
+#elif defined(__BIG_ENDIAN_BITFIELD)
+		unsigned _pad:9;
+		unsigned susp_fen:1 ;
+		unsigned susp_nod:1 ;
+		unsigned user_isp:1 ;
+		unsigned peer_isp:1 ;
+		unsigned aftr_isp:1 ; /* isp .. imposed sync pause */
+		unsigned susp:1 ;   /* 2/2	 IO suspended  no/yes */
+		unsigned pdsk:4 ;   /* 8/16	 from D_DISKLESS to D_UP_TO_DATE */
+		unsigned disk:4 ;   /* 8/16	 from D_DISKLESS to D_UP_TO_DATE */
+		unsigned conn:5 ;   /* 17/32	 cstates */
+		unsigned peer:2 ;   /* 3/4	 primary/secondary/unknown */
+		unsigned role:2 ;   /* 3/4	 primary/secondary/unknown */
+#else
+# error "this endianness is not supported"
+#endif
+	};
+	unsigned int i;
+};
+
+enum drbd_state_rv {
+	SS_CW_NO_NEED = 4,
+	SS_CW_SUCCESS = 3,
+	SS_NOTHING_TO_DO = 2,
+	SS_SUCCESS = 1,
+	SS_UNKNOWN_ERROR = 0, /* Used to sleep longer in _drbd_request_state */
+	SS_TWO_PRIMARIES = -1,
+	SS_NO_UP_TO_DATE_DISK = -2,
+	SS_NO_LOCAL_DISK = -4,
+	SS_NO_REMOTE_DISK = -5,
+	SS_CONNECTED_OUTDATES = -6,
+	SS_PRIMARY_NOP = -7,
+	SS_RESYNC_RUNNING = -8,
+	SS_ALREADY_STANDALONE = -9,
+	SS_CW_FAILED_BY_PEER = -10,
+	SS_IS_DISKLESS = -11,
+	SS_DEVICE_IN_USE = -12,
+	SS_NO_NET_CONFIG = -13,
+	SS_NO_VERIFY_ALG = -14,       /* drbd-8.2 only */
+	SS_NEED_CONNECTION = -15,    /* drbd-8.2 only */
+	SS_LOWER_THAN_OUTDATED = -16,
+	SS_NOT_SUPPORTED = -17,      /* drbd-8.2 only */
+	SS_IN_TRANSIENT_STATE = -18,  /* Retry after the next state change */
+	SS_CONCURRENT_ST_CHG = -19,   /* Concurrent cluster side state change! */
+	SS_AFTER_LAST_ERROR = -20,    /* Keep this at bottom */
+};
+
+/* from drbd_strings.c */
+extern const char *drbd_conn_str(enum drbd_conns);
+extern const char *drbd_role_str(enum drbd_role);
+extern const char *drbd_disk_str(enum drbd_disk_state);
+extern const char *drbd_set_st_err_str(enum drbd_state_rv);
+
+#define SHARED_SECRET_MAX 64
+
+#define MDF_CONSISTENT		(1 << 0)
+#define MDF_PRIMARY_IND		(1 << 1)
+#define MDF_CONNECTED_IND	(1 << 2)
+#define MDF_FULL_SYNC		(1 << 3)
+#define MDF_WAS_UP_TO_DATE	(1 << 4)
+#define MDF_PEER_OUT_DATED	(1 << 5)
+#define MDF_CRASHED_PRIMARY     (1 << 6)
+
+enum drbd_uuid_index {
+	UI_CURRENT,
+	UI_BITMAP,
+	UI_HISTORY_START,
+	UI_HISTORY_END,
+	UI_SIZE,      /* nl-packet: number of dirty bits */
+	UI_FLAGS,     /* nl-packet: flags */
+	UI_EXTENDED_SIZE   /* Everything. */
+};
+
+enum drbd_timeout_flag {
+	UT_DEFAULT      = 0,
+	UT_DEGRADED     = 1,
+	UT_PEER_OUTDATED = 2,
+};
+
+#define UUID_JUST_CREATED ((__u64)4)
+
+#define DRBD_MAGIC 0x83740267
+#define BE_DRBD_MAGIC __constant_cpu_to_be32(DRBD_MAGIC)
+#define DRBD_MAGIC_BIG 0x835a
+#define BE_DRBD_MAGIC_BIG __constant_cpu_to_be16(DRBD_MAGIC_BIG)
+
+/* these are of type "int" */
+#define DRBD_MD_INDEX_INTERNAL -1
+#define DRBD_MD_INDEX_FLEX_EXT -2
+#define DRBD_MD_INDEX_FLEX_INT -3
+
+/* Start of the new netlink/connector stuff */
+
+#define DRBD_NL_CREATE_DEVICE 0x01
+#define DRBD_NL_SET_DEFAULTS  0x02
+
+
+/* For searching a vacant cn_idx value */
+#define CN_IDX_STEP			6977
+
+struct drbd_nl_cfg_req {
+	int packet_type;
+	unsigned int drbd_minor;
+	int flags;
+	unsigned short tag_list[];
+};
+
+struct drbd_nl_cfg_reply {
+	int packet_type;
+	unsigned int minor;
+	int ret_code; /* enum ret_code or set_st_err_t */
+	unsigned short tag_list[]; /* only used with get_* calls */
+};
+
+#endif
diff --git a/include/linux/drbd_limits.h b/include/linux/drbd_limits.h
new file mode 100644
index 00000000..447c3675
--- /dev/null
+++ b/include/linux/drbd_limits.h
@@ -0,0 +1,168 @@
+/*
+  drbd_limits.h
+  This file is part of DRBD by Philipp Reisner and Lars Ellenberg.
+*/
+
+/*
+ * Our current limitations.
+ * Some of them are hard limits,
+ * some of them are arbitrary range limits, that make it easier to provide
+ * feedback about nonsense settings for certain configurable values.
+ */
+
+#ifndef DRBD_LIMITS_H
+#define DRBD_LIMITS_H 1
+
+#define DEBUG_RANGE_CHECK 0
+
+#define DRBD_MINOR_COUNT_MIN 1
+#define DRBD_MINOR_COUNT_MAX 256
+#define DRBD_MINOR_COUNT_DEF 32
+
+#define DRBD_DIALOG_REFRESH_MIN 0
+#define DRBD_DIALOG_REFRESH_MAX 600
+
+/* valid port number */
+#define DRBD_PORT_MIN 1
+#define DRBD_PORT_MAX 0xffff
+
+/* startup { */
+  /* if you want more than 3.4 days, disable */
+#define DRBD_WFC_TIMEOUT_MIN 0
+#define DRBD_WFC_TIMEOUT_MAX 300000
+#define DRBD_WFC_TIMEOUT_DEF 0
+
+#define DRBD_DEGR_WFC_TIMEOUT_MIN 0
+#define DRBD_DEGR_WFC_TIMEOUT_MAX 300000
+#define DRBD_DEGR_WFC_TIMEOUT_DEF 0
+
+#define DRBD_OUTDATED_WFC_TIMEOUT_MIN 0
+#define DRBD_OUTDATED_WFC_TIMEOUT_MAX 300000
+#define DRBD_OUTDATED_WFC_TIMEOUT_DEF 0
+/* }*/
+
+/* net { */
+  /* timeout, unit centi seconds
+   * more than one minute timeout is not useful */
+#define DRBD_TIMEOUT_MIN 1
+#define DRBD_TIMEOUT_MAX 600
+#define DRBD_TIMEOUT_DEF 60       /* 6 seconds */
+
+  /* active connection retries when C_WF_CONNECTION */
+#define DRBD_CONNECT_INT_MIN 1
+#define DRBD_CONNECT_INT_MAX 120
+#define DRBD_CONNECT_INT_DEF 10   /* seconds */
+
+  /* keep-alive probes when idle */
+#define DRBD_PING_INT_MIN 1
+#define DRBD_PING_INT_MAX 120
+#define DRBD_PING_INT_DEF 10
+
+ /* timeout for the ping packets.*/
+#define DRBD_PING_TIMEO_MIN  1
+#define DRBD_PING_TIMEO_MAX  100
+#define DRBD_PING_TIMEO_DEF  5
+
+  /* max number of write requests between write barriers */
+#define DRBD_MAX_EPOCH_SIZE_MIN 1
+#define DRBD_MAX_EPOCH_SIZE_MAX 20000
+#define DRBD_MAX_EPOCH_SIZE_DEF 2048
+
+  /* I don't think that a tcp send buffer of more than 10M is useful */
+#define DRBD_SNDBUF_SIZE_MIN  0
+#define DRBD_SNDBUF_SIZE_MAX  (10<<20)
+#define DRBD_SNDBUF_SIZE_DEF  0
+
+#define DRBD_RCVBUF_SIZE_MIN  0
+#define DRBD_RCVBUF_SIZE_MAX  (10<<20)
+#define DRBD_RCVBUF_SIZE_DEF  0
+
+  /* @4k PageSize -> 128kB - 512MB */
+#define DRBD_MAX_BUFFERS_MIN  32
+#define DRBD_MAX_BUFFERS_MAX  131072
+#define DRBD_MAX_BUFFERS_DEF  2048
+
+  /* @4k PageSize -> 4kB - 512MB */
+#define DRBD_UNPLUG_WATERMARK_MIN  1
+#define DRBD_UNPLUG_WATERMARK_MAX  131072
+#define DRBD_UNPLUG_WATERMARK_DEF (DRBD_MAX_BUFFERS_DEF/16)
+
+  /* 0 is disabled.
+   * 200 should be more than enough even for very short timeouts */
+#define DRBD_KO_COUNT_MIN  0
+#define DRBD_KO_COUNT_MAX  200
+#define DRBD_KO_COUNT_DEF  0
+/* } */
+
+/* syncer { */
+  /* FIXME allow rate to be zero? */
+#define DRBD_RATE_MIN 1
+/* channel bonding 10 GbE, or other hardware */
+#define DRBD_RATE_MAX (4 << 20)
+#define DRBD_RATE_DEF 250  /* kb/second */
+
+  /* less than 7 would hit performance unnecessarily.
+   * 3833 is the largest prime that still does fit
+   * into 64 sectors of activity log */
+#define DRBD_AL_EXTENTS_MIN  7
+#define DRBD_AL_EXTENTS_MAX  3833
+#define DRBD_AL_EXTENTS_DEF  127
+
+#define DRBD_AFTER_MIN  -1
+#define DRBD_AFTER_MAX  255
+#define DRBD_AFTER_DEF  -1
+
+/* } */
+
+/* drbdsetup XY resize -d Z
+ * you are free to reduce the device size to nothing, if you want to.
+ * the upper limit with 64bit kernel, enough ram and flexible meta data
+ * is 1 PiB, currently. */
+/* DRBD_MAX_SECTORS */
+#define DRBD_DISK_SIZE_SECT_MIN  0
+#define DRBD_DISK_SIZE_SECT_MAX  (1 * (2LLU << 40))
+#define DRBD_DISK_SIZE_SECT_DEF  0 /* = disabled = no user size... */
+
+#define DRBD_ON_IO_ERROR_DEF EP_PASS_ON
+#define DRBD_FENCING_DEF FP_DONT_CARE
+#define DRBD_AFTER_SB_0P_DEF ASB_DISCONNECT
+#define DRBD_AFTER_SB_1P_DEF ASB_DISCONNECT
+#define DRBD_AFTER_SB_2P_DEF ASB_DISCONNECT
+#define DRBD_RR_CONFLICT_DEF ASB_DISCONNECT
+#define DRBD_ON_NO_DATA_DEF OND_IO_ERROR
+#define DRBD_ON_CONGESTION_DEF OC_BLOCK
+
+#define DRBD_MAX_BIO_BVECS_MIN 0
+#define DRBD_MAX_BIO_BVECS_MAX 128
+#define DRBD_MAX_BIO_BVECS_DEF 0
+
+#define DRBD_C_PLAN_AHEAD_MIN  0
+#define DRBD_C_PLAN_AHEAD_MAX  300
+#define DRBD_C_PLAN_AHEAD_DEF  0 /* RS rate controller disabled by default */
+
+#define DRBD_C_DELAY_TARGET_MIN 1
+#define DRBD_C_DELAY_TARGET_MAX 100
+#define DRBD_C_DELAY_TARGET_DEF 10
+
+#define DRBD_C_FILL_TARGET_MIN 0
+#define DRBD_C_FILL_TARGET_MAX (1<<20) /* 500MByte in sec */
+#define DRBD_C_FILL_TARGET_DEF 0 /* By default disabled -> controlled by delay_target */
+
+#define DRBD_C_MAX_RATE_MIN     250 /* kByte/sec */
+#define DRBD_C_MAX_RATE_MAX     (4 << 20)
+#define DRBD_C_MAX_RATE_DEF     102400
+
+#define DRBD_C_MIN_RATE_MIN     0 /* kByte/sec */
+#define DRBD_C_MIN_RATE_MAX     (4 << 20)
+#define DRBD_C_MIN_RATE_DEF     4096
+
+#define DRBD_CONG_FILL_MIN	0
+#define DRBD_CONG_FILL_MAX	(10<<21) /* 10GByte in sectors */
+#define DRBD_CONG_FILL_DEF	0
+
+#define DRBD_CONG_EXTENTS_MIN	DRBD_AL_EXTENTS_MIN
+#define DRBD_CONG_EXTENTS_MAX	DRBD_AL_EXTENTS_MAX
+#define DRBD_CONG_EXTENTS_DEF	DRBD_AL_EXTENTS_DEF
+
+#undef RANGE
+#endif
diff --git a/include/linux/drbd_nl.h b/include/linux/drbd_nl.h
new file mode 100644
index 00000000..ab6159e4
--- /dev/null
+++ b/include/linux/drbd_nl.h
@@ -0,0 +1,160 @@
+/*
+   PAKET( name,
+	  TYPE ( pn, pr, member )
+	  ...
+   )
+
+   You may never reissue one of the pn arguments
+*/
+
+#if !defined(NL_PACKET) || !defined(NL_STRING) || !defined(NL_INTEGER) || !defined(NL_BIT) || !defined(NL_INT64)
+#error "The macros NL_PACKET, NL_STRING, NL_INTEGER, NL_INT64 and NL_BIT needs to be defined"
+#endif
+
+NL_PACKET(primary, 1,
+       NL_BIT(		1,	T_MAY_IGNORE,	primary_force)
+)
+
+NL_PACKET(secondary, 2, )
+
+NL_PACKET(disk_conf, 3,
+	NL_INT64(	2,	T_MAY_IGNORE,	disk_size)
+	NL_STRING(	3,	T_MANDATORY,	backing_dev,	128)
+	NL_STRING(	4,	T_MANDATORY,	meta_dev,	128)
+	NL_INTEGER(	5,	T_MANDATORY,	meta_dev_idx)
+	NL_INTEGER(	6,	T_MAY_IGNORE,	on_io_error)
+	NL_INTEGER(	7,	T_MAY_IGNORE,	fencing)
+	NL_BIT(		37,	T_MAY_IGNORE,	use_bmbv)
+	NL_BIT(		53,	T_MAY_IGNORE,	no_disk_flush)
+	NL_BIT(		54,	T_MAY_IGNORE,	no_md_flush)
+	  /*  55 max_bio_size was available in 8.2.6rc2 */
+	NL_INTEGER(	56,	T_MAY_IGNORE,	max_bio_bvecs)
+	NL_BIT(		57,	T_MAY_IGNORE,	no_disk_barrier)
+	NL_BIT(		58,	T_MAY_IGNORE,	no_disk_drain)
+)
+
+NL_PACKET(detach, 4, )
+
+NL_PACKET(net_conf, 5,
+	NL_STRING(	8,	T_MANDATORY,	my_addr,	128)
+	NL_STRING(	9,	T_MANDATORY,	peer_addr,	128)
+	NL_STRING(	10,	T_MAY_IGNORE,	shared_secret,	SHARED_SECRET_MAX)
+	NL_STRING(	11,	T_MAY_IGNORE,	cram_hmac_alg,	SHARED_SECRET_MAX)
+	NL_STRING(	44,	T_MAY_IGNORE,	integrity_alg,	SHARED_SECRET_MAX)
+	NL_INTEGER(	14,	T_MAY_IGNORE,	timeout)
+	NL_INTEGER(	15,	T_MANDATORY,	wire_protocol)
+	NL_INTEGER(	16,	T_MAY_IGNORE,	try_connect_int)
+	NL_INTEGER(	17,	T_MAY_IGNORE,	ping_int)
+	NL_INTEGER(	18,	T_MAY_IGNORE,	max_epoch_size)
+	NL_INTEGER(	19,	T_MAY_IGNORE,	max_buffers)
+	NL_INTEGER(	20,	T_MAY_IGNORE,	unplug_watermark)
+	NL_INTEGER(	21,	T_MAY_IGNORE,	sndbuf_size)
+	NL_INTEGER(	22,	T_MAY_IGNORE,	ko_count)
+	NL_INTEGER(	24,	T_MAY_IGNORE,	after_sb_0p)
+	NL_INTEGER(	25,	T_MAY_IGNORE,	after_sb_1p)
+	NL_INTEGER(	26,	T_MAY_IGNORE,	after_sb_2p)
+	NL_INTEGER(	39,	T_MAY_IGNORE,	rr_conflict)
+	NL_INTEGER(	40,	T_MAY_IGNORE,	ping_timeo)
+	NL_INTEGER(	67,	T_MAY_IGNORE,	rcvbuf_size)
+	NL_INTEGER(	81,	T_MAY_IGNORE,	on_congestion)
+	NL_INTEGER(	82,	T_MAY_IGNORE,	cong_fill)
+	NL_INTEGER(	83,	T_MAY_IGNORE,	cong_extents)
+	  /* 59 addr_family was available in GIT, never released */
+	NL_BIT(		60,	T_MANDATORY,	mind_af)
+	NL_BIT(		27,	T_MAY_IGNORE,	want_lose)
+	NL_BIT(		28,	T_MAY_IGNORE,	two_primaries)
+	NL_BIT(		41,	T_MAY_IGNORE,	always_asbp)
+	NL_BIT(		61,	T_MAY_IGNORE,	no_cork)
+	NL_BIT(		62,	T_MANDATORY,	auto_sndbuf_size)
+	NL_BIT(		70,	T_MANDATORY,	dry_run)
+)
+
+NL_PACKET(disconnect, 6,
+	NL_BIT(		84,	T_MAY_IGNORE,	force)
+)
+
+NL_PACKET(resize, 7,
+	NL_INT64(		29,	T_MAY_IGNORE,	resize_size)
+	NL_BIT(			68,	T_MAY_IGNORE,	resize_force)
+	NL_BIT(			69,	T_MANDATORY,	no_resync)
+)
+
+NL_PACKET(syncer_conf, 8,
+	NL_INTEGER(	30,	T_MAY_IGNORE,	rate)
+	NL_INTEGER(	31,	T_MAY_IGNORE,	after)
+	NL_INTEGER(	32,	T_MAY_IGNORE,	al_extents)
+/*	NL_INTEGER(     71,	T_MAY_IGNORE,	dp_volume)
+ *	NL_INTEGER(     72,	T_MAY_IGNORE,	dp_interval)
+ *	NL_INTEGER(     73,	T_MAY_IGNORE,	throttle_th)
+ *	NL_INTEGER(     74,	T_MAY_IGNORE,	hold_off_th)
+ * feature will be reimplemented differently with 8.3.9 */
+	NL_STRING(      52,     T_MAY_IGNORE,   verify_alg,     SHARED_SECRET_MAX)
+	NL_STRING(      51,     T_MAY_IGNORE,   cpu_mask,       32)
+	NL_STRING(	64,	T_MAY_IGNORE,	csums_alg,	SHARED_SECRET_MAX)
+	NL_BIT(         65,     T_MAY_IGNORE,   use_rle)
+	NL_INTEGER(	75,	T_MAY_IGNORE,	on_no_data)
+	NL_INTEGER(	76,	T_MAY_IGNORE,	c_plan_ahead)
+	NL_INTEGER(     77,	T_MAY_IGNORE,	c_delay_target)
+	NL_INTEGER(     78,	T_MAY_IGNORE,	c_fill_target)
+	NL_INTEGER(     79,	T_MAY_IGNORE,	c_max_rate)
+	NL_INTEGER(     80,	T_MAY_IGNORE,	c_min_rate)
+)
+
+NL_PACKET(invalidate, 9, )
+NL_PACKET(invalidate_peer, 10, )
+NL_PACKET(pause_sync, 11, )
+NL_PACKET(resume_sync, 12, )
+NL_PACKET(suspend_io, 13, )
+NL_PACKET(resume_io, 14, )
+NL_PACKET(outdate, 15, )
+NL_PACKET(get_config, 16, )
+NL_PACKET(get_state, 17,
+	NL_INTEGER(	33,	T_MAY_IGNORE,	state_i)
+)
+
+NL_PACKET(get_uuids, 18,
+	NL_STRING(	34,	T_MAY_IGNORE,	uuids,	(UI_SIZE*sizeof(__u64)))
+	NL_INTEGER(	35,	T_MAY_IGNORE,	uuids_flags)
+)
+
+NL_PACKET(get_timeout_flag, 19,
+	NL_BIT(		36,	T_MAY_IGNORE,	use_degraded)
+)
+
+NL_PACKET(call_helper, 20,
+	NL_STRING(	38,	T_MAY_IGNORE,	helper,		32)
+)
+
+/* Tag nr 42 already allocated in drbd-8.1 development. */
+
+NL_PACKET(sync_progress, 23,
+	NL_INTEGER(	43,	T_MAY_IGNORE,	sync_progress)
+)
+
+NL_PACKET(dump_ee, 24,
+	NL_STRING(	45,	T_MAY_IGNORE,	dump_ee_reason, 32)
+	NL_STRING(	46,	T_MAY_IGNORE,	seen_digest, SHARED_SECRET_MAX)
+	NL_STRING(	47,	T_MAY_IGNORE,	calc_digest, SHARED_SECRET_MAX)
+	NL_INT64(	48,	T_MAY_IGNORE,	ee_sector)
+	NL_INT64(	49,	T_MAY_IGNORE,	ee_block_id)
+	NL_STRING(	50,	T_MAY_IGNORE,	ee_data,	32 << 10)
+)
+
+NL_PACKET(start_ov, 25,
+	NL_INT64(	66,	T_MAY_IGNORE,	start_sector)
+)
+
+NL_PACKET(new_c_uuid, 26,
+       NL_BIT(		63,	T_MANDATORY,	clear_bm)
+)
+
+#ifdef NL_RESPONSE
+NL_RESPONSE(return_code_only, 27)
+#endif
+
+#undef NL_PACKET
+#undef NL_INTEGER
+#undef NL_INT64
+#undef NL_BIT
+#undef NL_STRING
+#undef NL_RESPONSE
diff --git a/include/linux/drbd_tag_magic.h b/include/linux/drbd_tag_magic.h
new file mode 100644
index 00000000..81f52f2c
--- /dev/null
+++ b/include/linux/drbd_tag_magic.h
@@ -0,0 +1,84 @@
+#ifndef DRBD_TAG_MAGIC_H
+#define DRBD_TAG_MAGIC_H
+
+#define TT_END     0
+#define TT_REMOVED 0xE000
+
+/* declare packet_type enums */
+enum packet_types {
+#define NL_PACKET(name, number, fields) P_ ## name = number,
+#define NL_RESPONSE(name, number) P_ ## name = number,
+#define NL_INTEGER(pn, pr, member)
+#define NL_INT64(pn, pr, member)
+#define NL_BIT(pn, pr, member)
+#define NL_STRING(pn, pr, member, len)
+#include "drbd_nl.h"
+	P_nl_after_last_packet,
+};
+
+/* These struct are used to deduce the size of the tag lists: */
+#define NL_PACKET(name, number, fields)	\
+	struct name ## _tag_len_struct { fields };
+#define NL_INTEGER(pn, pr, member)		\
+	int member; int tag_and_len ## member;
+#define NL_INT64(pn, pr, member)		\
+	__u64 member; int tag_and_len ## member;
+#define NL_BIT(pn, pr, member)		\
+	unsigned char member:1; int tag_and_len ## member;
+#define NL_STRING(pn, pr, member, len)	\
+	unsigned char member[len]; int member ## _len; \
+	int tag_and_len ## member;
+#include <linux/drbd_nl.h>
+
+/* declare tag-list-sizes */
+static const int tag_list_sizes[] = {
+#define NL_PACKET(name, number, fields) 2 fields ,
+#define NL_INTEGER(pn, pr, member)      + 4 + 4
+#define NL_INT64(pn, pr, member)        + 4 + 8
+#define NL_BIT(pn, pr, member)          + 4 + 1
+#define NL_STRING(pn, pr, member, len)  + 4 + (len)
+#include "drbd_nl.h"
+};
+
+/* The two highest bits are used for the tag type */
+#define TT_MASK      0xC000
+#define TT_INTEGER   0x0000
+#define TT_INT64     0x4000
+#define TT_BIT       0x8000
+#define TT_STRING    0xC000
+/* The next bit indicates if processing of the tag is mandatory */
+#define T_MANDATORY  0x2000
+#define T_MAY_IGNORE 0x0000
+#define TN_MASK      0x1fff
+/* The remaining 13 bits are used to enumerate the tags */
+
+#define tag_type(T)   ((T) & TT_MASK)
+#define tag_number(T) ((T) & TN_MASK)
+
+/* declare tag enums */
+#define NL_PACKET(name, number, fields) fields
+enum drbd_tags {
+#define NL_INTEGER(pn, pr, member)     T_ ## member = pn | TT_INTEGER | pr ,
+#define NL_INT64(pn, pr, member)       T_ ## member = pn | TT_INT64   | pr ,
+#define NL_BIT(pn, pr, member)         T_ ## member = pn | TT_BIT     | pr ,
+#define NL_STRING(pn, pr, member, len) T_ ## member = pn | TT_STRING  | pr ,
+#include "drbd_nl.h"
+};
+
+struct tag {
+	const char *name;
+	int type_n_flags;
+	int max_len;
+};
+
+/* declare tag names */
+#define NL_PACKET(name, number, fields) fields
+static const struct tag tag_descriptions[] = {
+#define NL_INTEGER(pn, pr, member)     [ pn ] = { #member, TT_INTEGER | pr, sizeof(int)   },
+#define NL_INT64(pn, pr, member)       [ pn ] = { #member, TT_INT64   | pr, sizeof(__u64) },
+#define NL_BIT(pn, pr, member)         [ pn ] = { #member, TT_BIT     | pr, sizeof(int)   },
+#define NL_STRING(pn, pr, member, len) [ pn ] = { #member, TT_STRING  | pr, (len)         },
+#include "drbd_nl.h"
+};
+
+#endif
diff --git a/include/linux/ds1286.h b/include/linux/ds1286.h
new file mode 100644
index 00000000..45ea0aa0
--- /dev/null
+++ b/include/linux/ds1286.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 1998, 1999, 2003 Ralf Baechle
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __LINUX_DS1286_H
+#define __LINUX_DS1286_H
+
+/**********************************************************************
+ * register summary
+ **********************************************************************/
+#define RTC_HUNDREDTH_SECOND	0
+#define RTC_SECONDS		1
+#define RTC_MINUTES		2
+#define RTC_MINUTES_ALARM	3
+#define RTC_HOURS		4
+#define RTC_HOURS_ALARM		5
+#define RTC_DAY			6
+#define RTC_DAY_ALARM		7
+#define RTC_DATE		8
+#define RTC_MONTH		9
+#define RTC_YEAR		10
+#define RTC_CMD			11
+#define RTC_WHSEC		12
+#define RTC_WSEC		13
+#define RTC_UNUSED		14
+
+/* RTC_*_alarm is always true if 2 MSBs are set */
+# define RTC_ALARM_DONT_CARE 	0xC0
+
+
+/*
+ * Bits in the month register
+ */
+#define RTC_EOSC		0x80
+#define RTC_ESQW		0x40
+
+/*
+ * Bits in the Command register
+ */
+#define RTC_TDF			0x01
+#define RTC_WAF			0x02
+#define RTC_TDM			0x04
+#define RTC_WAM			0x08
+#define RTC_PU_LVL		0x10
+#define RTC_IBH_LO		0x20
+#define RTC_IPSW		0x40
+#define RTC_TE			0x80
+
+#endif /* __LINUX_DS1286_H */
diff --git a/include/linux/ds17287rtc.h b/include/linux/ds17287rtc.h
new file mode 100644
index 00000000..d85d3f49
--- /dev/null
+++ b/include/linux/ds17287rtc.h
@@ -0,0 +1,66 @@
+/*
+ * ds17287rtc.h - register definitions for the ds1728[57] RTC / CMOS RAM
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * (C) 2003 Guido Guenther <agx@sigxcpu.org>
+ */
+#ifndef __LINUX_DS17287RTC_H
+#define __LINUX_DS17287RTC_H
+
+#include <linux/rtc.h>			/* get the user-level API */
+#include <linux/mc146818rtc.h>
+
+/* Register A */
+#define DS_REGA_DV2	0x40		/* countdown chain */
+#define DS_REGA_DV1	0x20		/* oscillator enable */
+#define DS_REGA_DV0	0x10		/* bank select */
+
+/* bank 1 registers */
+#define DS_B1_MODEL	0x40		/* model number byte */
+#define DS_B1_SN1 	0x41		/* serial number byte 1 */
+#define DS_B1_SN2 	0x42		/* serial number byte 2 */
+#define DS_B1_SN3 	0x43		/* serial number byte 3 */
+#define DS_B1_SN4 	0x44		/* serial number byte 4 */
+#define DS_B1_SN5 	0x45		/* serial number byte 5 */
+#define DS_B1_SN6 	0x46		/* serial number byte 6 */
+#define DS_B1_CRC 	0x47		/* CRC byte */
+#define DS_B1_CENTURY 	0x48		/* Century byte */
+#define DS_B1_DALARM 	0x49		/* date alarm */
+#define DS_B1_XCTRL4A	0x4a		/* extendec control register 4a */
+#define DS_B1_XCTRL4B	0x4b		/* extendec control register 4b */
+#define DS_B1_RTCADDR2 	0x4e		/* rtc address 2 */
+#define DS_B1_RTCADDR3 	0x4f		/* rtc address 3 */
+#define DS_B1_RAMLSB	0x50		/* extended ram LSB */
+#define DS_B1_RAMMSB	0x51		/* extended ram MSB */
+#define DS_B1_RAMDPORT	0x53		/* extended ram data port */
+
+/* register details */
+/* extended control register 4a */
+#define DS_XCTRL4A_VRT2	0x80 		/* valid ram and time */
+#define DS_XCTRL4A_INCR	0x40		/* increment progress status */
+#define DS_XCTRL4A_BME	0x20		/* burst mode enable */
+#define DS_XCTRL4A_PAB	0x08		/* power active bar ctrl */
+#define DS_XCTRL4A_RF	0x04		/* ram clear flag */
+#define DS_XCTRL4A_WF	0x02		/* wake up alarm flag */
+#define DS_XCTRL4A_KF	0x01		/* kickstart flag */
+
+/* interrupt causes */
+#define DS_XCTRL4A_IFS	(DS_XCTRL4A_RF|DS_XCTRL4A_WF|DS_XCTRL4A_KF)
+
+/* extended control register 4b */
+#define DS_XCTRL4B_ABE	0x80 		/* auxiliary battery enable */
+#define DS_XCTRL4B_E32K	0x40		/* enable 32.768 kHz Output */
+#define DS_XCTRL4B_CS	0x20		/* crystal select */
+#define DS_XCTRL4B_RCE	0x10		/* ram clear enable */
+#define DS_XCTRL4B_PRS	0x08		/* PAB resec select */
+#define DS_XCTRL4B_RIE	0x04		/* ram clear interrupt enable */
+#define DS_XCTRL4B_WFE	0x02		/* wake up alarm interrupt enable */
+#define DS_XCTRL4B_KFE	0x01		/* kickstart interrupt enable */
+
+/* interrupt enable bits */
+#define DS_XCTRL4B_IFES	(DS_XCTRL4B_RIE|DS_XCTRL4B_WFE|DS_XCTRL4B_KFE)
+
+#endif /* __LINUX_DS17287RTC_H */
diff --git a/include/linux/ds2782_battery.h b/include/linux/ds2782_battery.h
new file mode 100644
index 00000000..b4e281f6
--- /dev/null
+++ b/include/linux/ds2782_battery.h
@@ -0,0 +1,8 @@
+#ifndef __LINUX_DS2782_BATTERY_H
+#define __LINUX_DS2782_BATTERY_H
+
+struct ds278x_platform_data {
+	int rsns;
+};
+
+#endif
diff --git a/include/linux/dtlk.h b/include/linux/dtlk.h
new file mode 100644
index 00000000..22a7b9a5
--- /dev/null
+++ b/include/linux/dtlk.h
@@ -0,0 +1,85 @@
+#define DTLK_MINOR	0
+#define DTLK_IO_EXTENT	0x02
+
+	/* ioctl's use magic number of 0xa3 */
+#define DTLK_INTERROGATE 0xa390	/* get settings from the DoubleTalk */
+#define DTLK_STATUS 0xa391	/* get status from the DoubleTalk */
+
+
+#define DTLK_CLEAR 0x18		/* stops speech */
+
+#define DTLK_MAX_RETRIES (loops_per_jiffy/(10000/HZ))
+
+	/* TTS Port Status Flags */
+#define TTS_READABLE     0x80	/* mask for bit which is nonzero if a
+				   byte can be read from the TTS port */
+#define TTS_SPEAKING     0x40	/* mask for SYNC bit, which is nonzero
+				   while DoubleTalk is producing
+				   output with TTS, PCM or CVSD
+				   synthesizers or tone generators
+				   (that is, all but LPC) */
+#define TTS_SPEAKING2    0x20	/* mask for SYNC2 bit,
+				   which falls to zero up to 0.4 sec
+				   before speech stops */
+#define TTS_WRITABLE     0x10	/* mask for RDY bit, which when set to
+             			   1, indicates the TTS port is ready
+             			   to accept a byte of data.  The RDY
+             			   bit goes zero 2-3 usec after
+             			   writing, and goes 1 again 180-190
+             			   usec later. */
+#define TTS_ALMOST_FULL  0x08	/* mask for AF bit: When set to 1,
+				   indicates that less than 300 free
+				   bytes are available in the TTS
+				   input buffer. AF is always 0 in the
+				   PCM, TGN and CVSD modes. */
+#define TTS_ALMOST_EMPTY 0x04	/* mask for AE bit: When set to 1,
+				   indicates that less than 300 bytes
+				   of data remain in DoubleTalk's
+				   input (TTS or PCM) buffer. AE is
+				   always 1 in the TGN and CVSD
+				   modes. */
+
+	/* LPC speak commands */
+#define LPC_5220_NORMAL 0x60	/* 5220 format decoding table, normal rate */
+#define LPC_5220_FAST 0x64	/* 5220 format decoding table, fast rate */
+#define LPC_D6_NORMAL 0x20	/* D6 format decoding table, normal rate */
+#define LPC_D6_FAST 0x24	/* D6 format decoding table, fast rate */
+
+	/* LPC Port Status Flags (valid only after one of the LPC
+           speak commands) */
+#define LPC_SPEAKING     0x80	/* mask for TS bit: When set to 1,
+				   indicates the LPC synthesizer is
+				   producing speech.*/
+#define LPC_BUFFER_LOW   0x40	/* mask for BL bit: When set to 1,
+				   indicates that the hardware LPC
+				   data buffer has less than 30 bytes
+				   remaining. (Total internal buffer
+				   size = 4096 bytes.) */
+#define LPC_BUFFER_EMPTY 0x20	/* mask for BE bit: When set to 1,
+				   indicates that the LPC data buffer
+				   ran out of data (error condition if
+				   TS is also 1).  */
+
+				/* data returned by Interrogate command */
+struct dtlk_settings
+{
+  unsigned short serial_number;	/* 0-7Fh:0-7Fh */
+  unsigned char rom_version[24]; /* null terminated string */
+  unsigned char mode;		/* 0=Character; 1=Phoneme; 2=Text */
+  unsigned char punc_level;	/* nB; 0-7 */
+  unsigned char formant_freq;	/* nF; 0-9 */
+  unsigned char pitch;		/* nP; 0-99 */
+  unsigned char speed;		/* nS; 0-9 */
+  unsigned char volume;		/* nV; 0-9 */
+  unsigned char tone;		/* nX; 0-2 */
+  unsigned char expression;	/* nE; 0-9 */
+  unsigned char ext_dict_loaded; /* 1=exception dictionary loaded */
+  unsigned char ext_dict_status; /* 1=exception dictionary enabled */
+  unsigned char free_ram;	/* # pages (truncated) remaining for
+                                   text buffer */
+  unsigned char articulation;	/* nA; 0-9 */
+  unsigned char reverb;		/* nR; 0-9 */
+  unsigned char eob;		/* 7Fh value indicating end of
+                                   parameter block */
+  unsigned char has_indexing;	/* nonzero if indexing is implemented */
+};
diff --git a/include/linux/dvb/Kbuild b/include/linux/dvb/Kbuild
new file mode 100644
index 00000000..f4dba863
--- /dev/null
+++ b/include/linux/dvb/Kbuild
@@ -0,0 +1,8 @@
+header-y += audio.h
+header-y += ca.h
+header-y += dmx.h
+header-y += frontend.h
+header-y += net.h
+header-y += osd.h
+header-y += version.h
+header-y += video.h
diff --git a/include/linux/dvb/audio.h b/include/linux/dvb/audio.h
new file mode 100644
index 00000000..d47bccd6
--- /dev/null
+++ b/include/linux/dvb/audio.h
@@ -0,0 +1,135 @@
+/*
+ * audio.h
+ *
+ * Copyright (C) 2000 Ralph  Metzler <ralph@convergence.de>
+ *                  & Marcus Metzler <marcus@convergence.de>
+ *                    for convergence integrated media GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Lesser Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ */
+
+#ifndef _DVBAUDIO_H_
+#define _DVBAUDIO_H_
+
+#include <linux/types.h>
+
+typedef enum {
+	AUDIO_SOURCE_DEMUX, /* Select the demux as the main source */
+	AUDIO_SOURCE_MEMORY /* Select internal memory as the main source */
+} audio_stream_source_t;
+
+
+typedef enum {
+	AUDIO_STOPPED,      /* Device is stopped */
+	AUDIO_PLAYING,      /* Device is currently playing */
+	AUDIO_PAUSED        /* Device is paused */
+} audio_play_state_t;
+
+
+typedef enum {
+	AUDIO_STEREO,
+	AUDIO_MONO_LEFT,
+	AUDIO_MONO_RIGHT,
+	AUDIO_MONO,
+	AUDIO_STEREO_SWAPPED
+} audio_channel_select_t;
+
+
+typedef struct audio_mixer {
+	unsigned int volume_left;
+	unsigned int volume_right;
+  // what else do we need? bass, pass-through, ...
+} audio_mixer_t;
+
+
+typedef struct audio_status {
+	int                    AV_sync_state;  /* sync audio and video? */
+	int                    mute_state;     /* audio is muted */
+	audio_play_state_t     play_state;     /* current playback state */
+	audio_stream_source_t  stream_source;  /* current stream source */
+	audio_channel_select_t channel_select; /* currently selected channel */
+	int                    bypass_mode;    /* pass on audio data to */
+	audio_mixer_t	       mixer_state;    /* current mixer state */
+} audio_status_t;                              /* separate decoder hardware */
+
+
+typedef
+struct audio_karaoke {  /* if Vocal1 or Vocal2 are non-zero, they get mixed  */
+	int vocal1;    /* into left and right t at 70% each */
+	int vocal2;    /* if both, Vocal1 and Vocal2 are non-zero, Vocal1 gets*/
+	int melody;    /* mixed into the left channel and */
+		       /* Vocal2 into the right channel at 100% each. */
+		       /* if Melody is non-zero, the melody channel gets mixed*/
+} audio_karaoke_t;     /* into left and right  */
+
+
+typedef __u16 audio_attributes_t;
+/*   bits: descr. */
+/*   15-13 audio coding mode (0=ac3, 2=mpeg1, 3=mpeg2ext, 4=LPCM, 6=DTS, */
+/*   12    multichannel extension */
+/*   11-10 audio type (0=not spec, 1=language included) */
+/*    9- 8 audio application mode (0=not spec, 1=karaoke, 2=surround) */
+/*    7- 6 Quantization / DRC (mpeg audio: 1=DRC exists)(lpcm: 0=16bit,  */
+/*    5- 4 Sample frequency fs (0=48kHz, 1=96kHz) */
+/*    2- 0 number of audio channels (n+1 channels) */
+
+
+/* for GET_CAPABILITIES and SET_FORMAT, the latter should only set one bit */
+#define AUDIO_CAP_DTS    1
+#define AUDIO_CAP_LPCM   2
+#define AUDIO_CAP_MP1    4
+#define AUDIO_CAP_MP2    8
+#define AUDIO_CAP_MP3   16
+#define AUDIO_CAP_AAC   32
+#define AUDIO_CAP_OGG   64
+#define AUDIO_CAP_SDDS 128
+#define AUDIO_CAP_AC3  256
+
+#define AUDIO_STOP                 _IO('o', 1)
+#define AUDIO_PLAY                 _IO('o', 2)
+#define AUDIO_PAUSE                _IO('o', 3)
+#define AUDIO_CONTINUE             _IO('o', 4)
+#define AUDIO_SELECT_SOURCE        _IO('o', 5)
+#define AUDIO_SET_MUTE             _IO('o', 6)
+#define AUDIO_SET_AV_SYNC          _IO('o', 7)
+#define AUDIO_SET_BYPASS_MODE      _IO('o', 8)
+#define AUDIO_CHANNEL_SELECT       _IO('o', 9)
+#define AUDIO_GET_STATUS           _IOR('o', 10, audio_status_t)
+
+#define AUDIO_GET_CAPABILITIES     _IOR('o', 11, unsigned int)
+#define AUDIO_CLEAR_BUFFER         _IO('o',  12)
+#define AUDIO_SET_ID               _IO('o', 13)
+#define AUDIO_SET_MIXER            _IOW('o', 14, audio_mixer_t)
+#define AUDIO_SET_STREAMTYPE       _IO('o', 15)
+#define AUDIO_SET_EXT_ID           _IO('o', 16)
+#define AUDIO_SET_ATTRIBUTES       _IOW('o', 17, audio_attributes_t)
+#define AUDIO_SET_KARAOKE          _IOW('o', 18, audio_karaoke_t)
+
+/**
+ * AUDIO_GET_PTS
+ *
+ * Read the 33 bit presentation time stamp as defined
+ * in ITU T-REC-H.222.0 / ISO/IEC 13818-1.
+ *
+ * The PTS should belong to the currently played
+ * frame if possible, but may also be a value close to it
+ * like the PTS of the last decoded frame or the last PTS
+ * extracted by the PES parser.
+ */
+#define AUDIO_GET_PTS              _IOR('o', 19, __u64)
+#define AUDIO_BILINGUAL_CHANNEL_SELECT _IO('o', 20)
+
+#endif /* _DVBAUDIO_H_ */
diff --git a/include/linux/dvb/ca.h b/include/linux/dvb/ca.h
new file mode 100644
index 00000000..c18537f3
--- /dev/null
+++ b/include/linux/dvb/ca.h
@@ -0,0 +1,90 @@
+/*
+ * ca.h
+ *
+ * Copyright (C) 2000 Ralph  Metzler <ralph@convergence.de>
+ *                  & Marcus Metzler <marcus@convergence.de>
+ *                    for convergence integrated media GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Lesser Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ */
+
+#ifndef _DVBCA_H_
+#define _DVBCA_H_
+
+/* slot interface types and info */
+
+typedef struct ca_slot_info {
+	int num;               /* slot number */
+
+	int type;              /* CA interface this slot supports */
+#define CA_CI            1     /* CI high level interface */
+#define CA_CI_LINK       2     /* CI link layer level interface */
+#define CA_CI_PHYS       4     /* CI physical layer level interface */
+#define CA_DESCR         8     /* built-in descrambler */
+#define CA_SC          128     /* simple smart card interface */
+
+	unsigned int flags;
+#define CA_CI_MODULE_PRESENT 1 /* module (or card) inserted */
+#define CA_CI_MODULE_READY   2
+} ca_slot_info_t;
+
+
+/* descrambler types and info */
+
+typedef struct ca_descr_info {
+	unsigned int num;          /* number of available descramblers (keys) */
+	unsigned int type;         /* type of supported scrambling system */
+#define CA_ECD           1
+#define CA_NDS           2
+#define CA_DSS           4
+} ca_descr_info_t;
+
+typedef struct ca_caps {
+	unsigned int slot_num;     /* total number of CA card and module slots */
+	unsigned int slot_type;    /* OR of all supported types */
+	unsigned int descr_num;    /* total number of descrambler slots (keys) */
+	unsigned int descr_type;   /* OR of all supported types */
+} ca_caps_t;
+
+/* a message to/from a CI-CAM */
+typedef struct ca_msg {
+	unsigned int index;
+	unsigned int type;
+	unsigned int length;
+	unsigned char msg[256];
+} ca_msg_t;
+
+typedef struct ca_descr {
+	unsigned int index;
+	unsigned int parity;	/* 0 == even, 1 == odd */
+	unsigned char cw[8];
+} ca_descr_t;
+
+typedef struct ca_pid {
+	unsigned int pid;
+	int index;		/* -1 == disable*/
+} ca_pid_t;
+
+#define CA_RESET          _IO('o', 128)
+#define CA_GET_CAP        _IOR('o', 129, ca_caps_t)
+#define CA_GET_SLOT_INFO  _IOR('o', 130, ca_slot_info_t)
+#define CA_GET_DESCR_INFO _IOR('o', 131, ca_descr_info_t)
+#define CA_GET_MSG        _IOR('o', 132, ca_msg_t)
+#define CA_SEND_MSG       _IOW('o', 133, ca_msg_t)
+#define CA_SET_DESCR      _IOW('o', 134, ca_descr_t)
+#define CA_SET_PID        _IOW('o', 135, ca_pid_t)
+
+#endif
diff --git a/include/linux/dvb/dmx.h b/include/linux/dvb/dmx.h
new file mode 100644
index 00000000..f078f3ac
--- /dev/null
+++ b/include/linux/dvb/dmx.h
@@ -0,0 +1,157 @@
+/*
+ * dmx.h
+ *
+ * Copyright (C) 2000 Marcus Metzler <marcus@convergence.de>
+ *                  & Ralph  Metzler <ralph@convergence.de>
+ *                    for convergence integrated media GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ */
+
+#ifndef _DVBDMX_H_
+#define _DVBDMX_H_
+
+#include <linux/types.h>
+#ifdef __KERNEL__
+#include <linux/time.h>
+#else
+#include <time.h>
+#endif
+
+
+#define DMX_FILTER_SIZE 16
+
+typedef enum
+{
+	DMX_OUT_DECODER, /* Streaming directly to decoder. */
+	DMX_OUT_TAP,     /* Output going to a memory buffer */
+			 /* (to be retrieved via the read command).*/
+	DMX_OUT_TS_TAP,  /* Output multiplexed into a new TS  */
+			 /* (to be retrieved by reading from the */
+			 /* logical DVR device).                 */
+	DMX_OUT_TSDEMUX_TAP /* Like TS_TAP but retrieved from the DMX device */
+} dmx_output_t;
+
+
+typedef enum
+{
+	DMX_IN_FRONTEND, /* Input from a front-end device.  */
+	DMX_IN_DVR       /* Input from the logical DVR device.  */
+} dmx_input_t;
+
+
+typedef enum
+{
+	DMX_PES_AUDIO0,
+	DMX_PES_VIDEO0,
+	DMX_PES_TELETEXT0,
+	DMX_PES_SUBTITLE0,
+	DMX_PES_PCR0,
+
+	DMX_PES_AUDIO1,
+	DMX_PES_VIDEO1,
+	DMX_PES_TELETEXT1,
+	DMX_PES_SUBTITLE1,
+	DMX_PES_PCR1,
+
+	DMX_PES_AUDIO2,
+	DMX_PES_VIDEO2,
+	DMX_PES_TELETEXT2,
+	DMX_PES_SUBTITLE2,
+	DMX_PES_PCR2,
+
+	DMX_PES_AUDIO3,
+	DMX_PES_VIDEO3,
+	DMX_PES_TELETEXT3,
+	DMX_PES_SUBTITLE3,
+	DMX_PES_PCR3,
+
+	DMX_PES_OTHER
+} dmx_pes_type_t;
+
+#define DMX_PES_AUDIO    DMX_PES_AUDIO0
+#define DMX_PES_VIDEO    DMX_PES_VIDEO0
+#define DMX_PES_TELETEXT DMX_PES_TELETEXT0
+#define DMX_PES_SUBTITLE DMX_PES_SUBTITLE0
+#define DMX_PES_PCR      DMX_PES_PCR0
+
+
+typedef struct dmx_filter
+{
+	__u8  filter[DMX_FILTER_SIZE];
+	__u8  mask[DMX_FILTER_SIZE];
+	__u8  mode[DMX_FILTER_SIZE];
+} dmx_filter_t;
+
+
+struct dmx_sct_filter_params
+{
+	__u16          pid;
+	dmx_filter_t   filter;
+	__u32          timeout;
+	__u32          flags;
+#define DMX_CHECK_CRC       1
+#define DMX_ONESHOT         2
+#define DMX_IMMEDIATE_START 4
+#define DMX_KERNEL_CLIENT   0x8000
+};
+
+
+struct dmx_pes_filter_params
+{
+	__u16          pid;
+	dmx_input_t    input;
+	dmx_output_t   output;
+	dmx_pes_type_t pes_type;
+	__u32          flags;
+};
+
+typedef struct dmx_caps {
+	__u32 caps;
+	int num_decoders;
+} dmx_caps_t;
+
+typedef enum {
+	DMX_SOURCE_FRONT0 = 0,
+	DMX_SOURCE_FRONT1,
+	DMX_SOURCE_FRONT2,
+	DMX_SOURCE_FRONT3,
+	DMX_SOURCE_DVR0   = 16,
+	DMX_SOURCE_DVR1,
+	DMX_SOURCE_DVR2,
+	DMX_SOURCE_DVR3
+} dmx_source_t;
+
+struct dmx_stc {
+	unsigned int num;	/* input : which STC? 0..N */
+	unsigned int base;	/* output: divisor for stc to get 90 kHz clock */
+	__u64 stc;		/* output: stc in 'base'*90 kHz units */
+};
+
+
+#define DMX_START                _IO('o', 41)
+#define DMX_STOP                 _IO('o', 42)
+#define DMX_SET_FILTER           _IOW('o', 43, struct dmx_sct_filter_params)
+#define DMX_SET_PES_FILTER       _IOW('o', 44, struct dmx_pes_filter_params)
+#define DMX_SET_BUFFER_SIZE      _IO('o', 45)
+#define DMX_GET_PES_PIDS         _IOR('o', 47, __u16[5])
+#define DMX_GET_CAPS             _IOR('o', 48, dmx_caps_t)
+#define DMX_SET_SOURCE           _IOW('o', 49, dmx_source_t)
+#define DMX_GET_STC              _IOWR('o', 50, struct dmx_stc)
+#define DMX_ADD_PID              _IOW('o', 51, __u16)
+#define DMX_REMOVE_PID           _IOW('o', 52, __u16)
+
+#endif /*_DVBDMX_H_*/
diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h
new file mode 100644
index 00000000..cb4428ab
--- /dev/null
+++ b/include/linux/dvb/frontend.h
@@ -0,0 +1,436 @@
+/*
+ * frontend.h
+ *
+ * Copyright (C) 2000 Marcus Metzler <marcus@convergence.de>
+ *		    Ralph  Metzler <ralph@convergence.de>
+ *		    Holger Waechtler <holger@convergence.de>
+ *		    Andre Draszik <ad@convergence.de>
+ *		    for convergence integrated media GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ */
+
+#ifndef _DVBFRONTEND_H_
+#define _DVBFRONTEND_H_
+
+#include <linux/types.h>
+
+typedef enum fe_type {
+	FE_QPSK,
+	FE_QAM,
+	FE_OFDM,
+	FE_ATSC
+} fe_type_t;
+
+
+typedef enum fe_caps {
+	FE_IS_STUPID			= 0,
+	FE_CAN_INVERSION_AUTO		= 0x1,
+	FE_CAN_FEC_1_2			= 0x2,
+	FE_CAN_FEC_2_3			= 0x4,
+	FE_CAN_FEC_3_4			= 0x8,
+	FE_CAN_FEC_4_5			= 0x10,
+	FE_CAN_FEC_5_6			= 0x20,
+	FE_CAN_FEC_6_7			= 0x40,
+	FE_CAN_FEC_7_8			= 0x80,
+	FE_CAN_FEC_8_9			= 0x100,
+	FE_CAN_FEC_AUTO			= 0x200,
+	FE_CAN_QPSK			= 0x400,
+	FE_CAN_QAM_16			= 0x800,
+	FE_CAN_QAM_32			= 0x1000,
+	FE_CAN_QAM_64			= 0x2000,
+	FE_CAN_QAM_128			= 0x4000,
+	FE_CAN_QAM_256			= 0x8000,
+	FE_CAN_QAM_AUTO			= 0x10000,
+	FE_CAN_TRANSMISSION_MODE_AUTO	= 0x20000,
+	FE_CAN_BANDWIDTH_AUTO		= 0x40000,
+	FE_CAN_GUARD_INTERVAL_AUTO	= 0x80000,
+	FE_CAN_HIERARCHY_AUTO		= 0x100000,
+	FE_CAN_8VSB			= 0x200000,
+	FE_CAN_16VSB			= 0x400000,
+	FE_HAS_EXTENDED_CAPS		= 0x800000,   /* We need more bitspace for newer APIs, indicate this. */
+	FE_CAN_TURBO_FEC		= 0x8000000,  /* frontend supports "turbo fec modulation" */
+	FE_CAN_2G_MODULATION		= 0x10000000, /* frontend supports "2nd generation modulation" (DVB-S2) */
+	FE_NEEDS_BENDING		= 0x20000000, /* not supported anymore, don't use (frontend requires frequency bending) */
+	FE_CAN_RECOVER			= 0x40000000, /* frontend can recover from a cable unplug automatically */
+	FE_CAN_MUTE_TS			= 0x80000000  /* frontend can stop spurious TS data output */
+} fe_caps_t;
+
+
+struct dvb_frontend_info {
+	char       name[128];
+	fe_type_t  type;			/* DEPRECATED. Use DTV_ENUM_DELSYS instead */
+	__u32      frequency_min;
+	__u32      frequency_max;
+	__u32      frequency_stepsize;
+	__u32      frequency_tolerance;
+	__u32      symbol_rate_min;
+	__u32      symbol_rate_max;
+	__u32      symbol_rate_tolerance;	/* ppm */
+	__u32      notifier_delay;		/* DEPRECATED */
+	fe_caps_t  caps;
+};
+
+
+/**
+ *  Check out the DiSEqC bus spec available on http://www.eutelsat.org/ for
+ *  the meaning of this struct...
+ */
+struct dvb_diseqc_master_cmd {
+	__u8 msg [6];	/*  { framing, address, command, data [3] } */
+	__u8 msg_len;	/*  valid values are 3...6  */
+};
+
+
+struct dvb_diseqc_slave_reply {
+	__u8 msg [4];	/*  { framing, data [3] } */
+	__u8 msg_len;	/*  valid values are 0...4, 0 means no msg  */
+	int  timeout;	/*  return from ioctl after timeout ms with */
+};			/*  errorcode when no message was received  */
+
+
+typedef enum fe_sec_voltage {
+	SEC_VOLTAGE_13,
+	SEC_VOLTAGE_18,
+	SEC_VOLTAGE_OFF
+} fe_sec_voltage_t;
+
+
+typedef enum fe_sec_tone_mode {
+	SEC_TONE_ON,
+	SEC_TONE_OFF
+} fe_sec_tone_mode_t;
+
+
+typedef enum fe_sec_mini_cmd {
+	SEC_MINI_A,
+	SEC_MINI_B
+} fe_sec_mini_cmd_t;
+
+
+typedef enum fe_status {
+	FE_HAS_SIGNAL	= 0x01,   /* found something above the noise level */
+	FE_HAS_CARRIER	= 0x02,   /* found a DVB signal  */
+	FE_HAS_VITERBI	= 0x04,   /* FEC is stable  */
+	FE_HAS_SYNC	= 0x08,   /* found sync bytes  */
+	FE_HAS_LOCK	= 0x10,   /* everything's working... */
+	FE_TIMEDOUT	= 0x20,   /* no lock within the last ~2 seconds */
+	FE_REINIT	= 0x40    /* frontend was reinitialized,  */
+} fe_status_t;			  /* application is recommended to reset */
+				  /* DiSEqC, tone and parameters */
+
+typedef enum fe_spectral_inversion {
+	INVERSION_OFF,
+	INVERSION_ON,
+	INVERSION_AUTO
+} fe_spectral_inversion_t;
+
+
+typedef enum fe_code_rate {
+	FEC_NONE = 0,
+	FEC_1_2,
+	FEC_2_3,
+	FEC_3_4,
+	FEC_4_5,
+	FEC_5_6,
+	FEC_6_7,
+	FEC_7_8,
+	FEC_8_9,
+	FEC_AUTO,
+	FEC_3_5,
+	FEC_9_10,
+} fe_code_rate_t;
+
+
+typedef enum fe_modulation {
+	QPSK,
+	QAM_16,
+	QAM_32,
+	QAM_64,
+	QAM_128,
+	QAM_256,
+	QAM_AUTO,
+	VSB_8,
+	VSB_16,
+	PSK_8,
+	APSK_16,
+	APSK_32,
+	DQPSK,
+} fe_modulation_t;
+
+typedef enum fe_transmit_mode {
+	TRANSMISSION_MODE_2K,
+	TRANSMISSION_MODE_8K,
+	TRANSMISSION_MODE_AUTO,
+	TRANSMISSION_MODE_4K,
+	TRANSMISSION_MODE_1K,
+	TRANSMISSION_MODE_16K,
+	TRANSMISSION_MODE_32K,
+} fe_transmit_mode_t;
+
+#if defined(__DVB_CORE__) || !defined (__KERNEL__)
+typedef enum fe_bandwidth {
+	BANDWIDTH_8_MHZ,
+	BANDWIDTH_7_MHZ,
+	BANDWIDTH_6_MHZ,
+	BANDWIDTH_AUTO,
+	BANDWIDTH_5_MHZ,
+	BANDWIDTH_10_MHZ,
+	BANDWIDTH_1_712_MHZ,
+} fe_bandwidth_t;
+#endif
+
+typedef enum fe_guard_interval {
+	GUARD_INTERVAL_1_32,
+	GUARD_INTERVAL_1_16,
+	GUARD_INTERVAL_1_8,
+	GUARD_INTERVAL_1_4,
+	GUARD_INTERVAL_AUTO,
+	GUARD_INTERVAL_1_128,
+	GUARD_INTERVAL_19_128,
+	GUARD_INTERVAL_19_256,
+} fe_guard_interval_t;
+
+
+typedef enum fe_hierarchy {
+	HIERARCHY_NONE,
+	HIERARCHY_1,
+	HIERARCHY_2,
+	HIERARCHY_4,
+	HIERARCHY_AUTO
+} fe_hierarchy_t;
+
+
+#if defined(__DVB_CORE__) || !defined (__KERNEL__)
+struct dvb_qpsk_parameters {
+	__u32		symbol_rate;  /* symbol rate in Symbols per second */
+	fe_code_rate_t	fec_inner;    /* forward error correction (see above) */
+};
+
+struct dvb_qam_parameters {
+	__u32		symbol_rate; /* symbol rate in Symbols per second */
+	fe_code_rate_t	fec_inner;   /* forward error correction (see above) */
+	fe_modulation_t	modulation;  /* modulation type (see above) */
+};
+
+struct dvb_vsb_parameters {
+	fe_modulation_t	modulation;  /* modulation type (see above) */
+};
+
+struct dvb_ofdm_parameters {
+	fe_bandwidth_t      bandwidth;
+	fe_code_rate_t      code_rate_HP;  /* high priority stream code rate */
+	fe_code_rate_t      code_rate_LP;  /* low priority stream code rate */
+	fe_modulation_t     constellation; /* modulation type (see above) */
+	fe_transmit_mode_t  transmission_mode;
+	fe_guard_interval_t guard_interval;
+	fe_hierarchy_t      hierarchy_information;
+};
+
+
+struct dvb_frontend_parameters {
+	__u32 frequency;     /* (absolute) frequency in Hz for QAM/OFDM/ATSC */
+			     /* intermediate frequency in kHz for QPSK */
+	fe_spectral_inversion_t inversion;
+	union {
+		struct dvb_qpsk_parameters qpsk;
+		struct dvb_qam_parameters  qam;
+		struct dvb_ofdm_parameters ofdm;
+		struct dvb_vsb_parameters vsb;
+	} u;
+};
+
+struct dvb_frontend_event {
+	fe_status_t status;
+	struct dvb_frontend_parameters parameters;
+};
+#endif
+
+/* S2API Commands */
+#define DTV_UNDEFINED		0
+#define DTV_TUNE		1
+#define DTV_CLEAR		2
+#define DTV_FREQUENCY		3
+#define DTV_MODULATION		4
+#define DTV_BANDWIDTH_HZ	5
+#define DTV_INVERSION		6
+#define DTV_DISEQC_MASTER	7
+#define DTV_SYMBOL_RATE		8
+#define DTV_INNER_FEC		9
+#define DTV_VOLTAGE		10
+#define DTV_TONE		11
+#define DTV_PILOT		12
+#define DTV_ROLLOFF		13
+#define DTV_DISEQC_SLAVE_REPLY	14
+
+/* Basic enumeration set for querying unlimited capabilities */
+#define DTV_FE_CAPABILITY_COUNT	15
+#define DTV_FE_CAPABILITY	16
+#define DTV_DELIVERY_SYSTEM	17
+
+/* ISDB-T and ISDB-Tsb */
+#define DTV_ISDBT_PARTIAL_RECEPTION	18
+#define DTV_ISDBT_SOUND_BROADCASTING	19
+
+#define DTV_ISDBT_SB_SUBCHANNEL_ID	20
+#define DTV_ISDBT_SB_SEGMENT_IDX	21
+#define DTV_ISDBT_SB_SEGMENT_COUNT	22
+
+#define DTV_ISDBT_LAYERA_FEC			23
+#define DTV_ISDBT_LAYERA_MODULATION		24
+#define DTV_ISDBT_LAYERA_SEGMENT_COUNT		25
+#define DTV_ISDBT_LAYERA_TIME_INTERLEAVING	26
+
+#define DTV_ISDBT_LAYERB_FEC			27
+#define DTV_ISDBT_LAYERB_MODULATION		28
+#define DTV_ISDBT_LAYERB_SEGMENT_COUNT		29
+#define DTV_ISDBT_LAYERB_TIME_INTERLEAVING	30
+
+#define DTV_ISDBT_LAYERC_FEC			31
+#define DTV_ISDBT_LAYERC_MODULATION		32
+#define DTV_ISDBT_LAYERC_SEGMENT_COUNT		33
+#define DTV_ISDBT_LAYERC_TIME_INTERLEAVING	34
+
+#define DTV_API_VERSION		35
+
+#define DTV_CODE_RATE_HP	36
+#define DTV_CODE_RATE_LP	37
+#define DTV_GUARD_INTERVAL	38
+#define DTV_TRANSMISSION_MODE	39
+#define DTV_HIERARCHY		40
+
+#define DTV_ISDBT_LAYER_ENABLED	41
+
+#define DTV_ISDBS_TS_ID		42
+
+#define DTV_DVBT2_PLP_ID	43
+
+#define DTV_ENUM_DELSYS		44
+
+#define DTV_MAX_COMMAND				DTV_ENUM_DELSYS
+
+typedef enum fe_pilot {
+	PILOT_ON,
+	PILOT_OFF,
+	PILOT_AUTO,
+} fe_pilot_t;
+
+typedef enum fe_rolloff {
+	ROLLOFF_35, /* Implied value in DVB-S, default for DVB-S2 */
+	ROLLOFF_20,
+	ROLLOFF_25,
+	ROLLOFF_AUTO,
+} fe_rolloff_t;
+
+typedef enum fe_delivery_system {
+	SYS_UNDEFINED,
+	SYS_DVBC_ANNEX_A,
+	SYS_DVBC_ANNEX_B,
+	SYS_DVBT,
+	SYS_DSS,
+	SYS_DVBS,
+	SYS_DVBS2,
+	SYS_DVBH,
+	SYS_ISDBT,
+	SYS_ISDBS,
+	SYS_ISDBC,
+	SYS_ATSC,
+	SYS_ATSCMH,
+	SYS_DMBTH,
+	SYS_CMMB,
+	SYS_DAB,
+	SYS_DVBT2,
+	SYS_TURBO,
+	SYS_DVBC_ANNEX_C,
+} fe_delivery_system_t;
+
+
+#define SYS_DVBC_ANNEX_AC	SYS_DVBC_ANNEX_A
+
+
+struct dtv_cmds_h {
+	char	*name;		/* A display name for debugging purposes */
+
+	__u32	cmd;		/* A unique ID */
+
+	/* Flags */
+	__u32	set:1;		/* Either a set or get property */
+	__u32	buffer:1;	/* Does this property use the buffer? */
+	__u32	reserved:30;	/* Align */
+};
+
+struct dtv_property {
+	__u32 cmd;
+	__u32 reserved[3];
+	union {
+		__u32 data;
+		struct {
+			__u8 data[32];
+			__u32 len;
+			__u32 reserved1[3];
+			void *reserved2;
+		} buffer;
+	} u;
+	int result;
+} __attribute__ ((packed));
+
+/* num of properties cannot exceed DTV_IOCTL_MAX_MSGS per ioctl */
+#define DTV_IOCTL_MAX_MSGS 64
+
+struct dtv_properties {
+	__u32 num;
+	struct dtv_property *props;
+};
+
+#define FE_SET_PROPERTY		   _IOW('o', 82, struct dtv_properties)
+#define FE_GET_PROPERTY		   _IOR('o', 83, struct dtv_properties)
+
+
+/**
+ * When set, this flag will disable any zigzagging or other "normal" tuning
+ * behaviour. Additionally, there will be no automatic monitoring of the lock
+ * status, and hence no frontend events will be generated. If a frontend device
+ * is closed, this flag will be automatically turned off when the device is
+ * reopened read-write.
+ */
+#define FE_TUNE_MODE_ONESHOT 0x01
+
+
+#define FE_GET_INFO		   _IOR('o', 61, struct dvb_frontend_info)
+
+#define FE_DISEQC_RESET_OVERLOAD   _IO('o', 62)
+#define FE_DISEQC_SEND_MASTER_CMD  _IOW('o', 63, struct dvb_diseqc_master_cmd)
+#define FE_DISEQC_RECV_SLAVE_REPLY _IOR('o', 64, struct dvb_diseqc_slave_reply)
+#define FE_DISEQC_SEND_BURST       _IO('o', 65)  /* fe_sec_mini_cmd_t */
+
+#define FE_SET_TONE		   _IO('o', 66)  /* fe_sec_tone_mode_t */
+#define FE_SET_VOLTAGE		   _IO('o', 67)  /* fe_sec_voltage_t */
+#define FE_ENABLE_HIGH_LNB_VOLTAGE _IO('o', 68)  /* int */
+
+#define FE_READ_STATUS		   _IOR('o', 69, fe_status_t)
+#define FE_READ_BER		   _IOR('o', 70, __u32)
+#define FE_READ_SIGNAL_STRENGTH    _IOR('o', 71, __u16)
+#define FE_READ_SNR		   _IOR('o', 72, __u16)
+#define FE_READ_UNCORRECTED_BLOCKS _IOR('o', 73, __u32)
+
+#define FE_SET_FRONTEND		   _IOW('o', 76, struct dvb_frontend_parameters)
+#define FE_GET_FRONTEND		   _IOR('o', 77, struct dvb_frontend_parameters)
+#define FE_SET_FRONTEND_TUNE_MODE  _IO('o', 81) /* unsigned int */
+#define FE_GET_EVENT		   _IOR('o', 78, struct dvb_frontend_event)
+
+#define FE_DISHNETWORK_SEND_LEGACY_CMD _IO('o', 80) /* unsigned int */
+
+#endif /*_DVBFRONTEND_H_*/
diff --git a/include/linux/dvb/net.h b/include/linux/dvb/net.h
new file mode 100644
index 00000000..f451e7eb
--- /dev/null
+++ b/include/linux/dvb/net.h
@@ -0,0 +1,52 @@
+/*
+ * net.h
+ *
+ * Copyright (C) 2000 Marcus Metzler <marcus@convergence.de>
+ *                  & Ralph  Metzler <ralph@convergence.de>
+ *                    for convergence integrated media GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ */
+
+#ifndef _DVBNET_H_
+#define _DVBNET_H_
+
+#include <linux/types.h>
+
+struct dvb_net_if {
+	__u16 pid;
+	__u16 if_num;
+	__u8  feedtype;
+#define DVB_NET_FEEDTYPE_MPE 0	/* multi protocol encapsulation */
+#define DVB_NET_FEEDTYPE_ULE 1	/* ultra lightweight encapsulation */
+};
+
+
+#define NET_ADD_IF    _IOWR('o', 52, struct dvb_net_if)
+#define NET_REMOVE_IF _IO('o', 53)
+#define NET_GET_IF    _IOWR('o', 54, struct dvb_net_if)
+
+
+/* binary compatibility cruft: */
+struct __dvb_net_if_old {
+	__u16 pid;
+	__u16 if_num;
+};
+#define __NET_ADD_IF_OLD _IOWR('o', 52, struct __dvb_net_if_old)
+#define __NET_GET_IF_OLD _IOWR('o', 54, struct __dvb_net_if_old)
+
+
+#endif /*_DVBNET_H_*/
diff --git a/include/linux/dvb/osd.h b/include/linux/dvb/osd.h
new file mode 100644
index 00000000..880e6843
--- /dev/null
+++ b/include/linux/dvb/osd.h
@@ -0,0 +1,144 @@
+/*
+ * osd.h
+ *
+ * Copyright (C) 2001 Ralph  Metzler <ralph@convergence.de>
+ *                  & Marcus Metzler <marcus@convergence.de>
+ *                    for convergence integrated media GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Lesser Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ */
+
+#ifndef _DVBOSD_H_
+#define _DVBOSD_H_
+
+#include <linux/compiler.h>
+
+typedef enum {
+  // All functions return -2 on "not open"
+  OSD_Close=1,    // ()
+  // Disables OSD and releases the buffers
+  // returns 0 on success
+  OSD_Open,       // (x0,y0,x1,y1,BitPerPixel[2/4/8](color&0x0F),mix[0..15](color&0xF0))
+  // Opens OSD with this size and bit depth
+  // returns 0 on success, -1 on DRAM allocation error, -2 on "already open"
+  OSD_Show,       // ()
+  // enables OSD mode
+  // returns 0 on success
+  OSD_Hide,       // ()
+  // disables OSD mode
+  // returns 0 on success
+  OSD_Clear,      // ()
+  // Sets all pixel to color 0
+  // returns 0 on success
+  OSD_Fill,       // (color)
+  // Sets all pixel to color <col>
+  // returns 0 on success
+  OSD_SetColor,   // (color,R{x0},G{y0},B{x1},opacity{y1})
+  // set palette entry <num> to <r,g,b>, <mix> and <trans> apply
+  // R,G,B: 0..255
+  // R=Red, G=Green, B=Blue
+  // opacity=0:      pixel opacity 0% (only video pixel shows)
+  // opacity=1..254: pixel opacity as specified in header
+  // opacity=255:    pixel opacity 100% (only OSD pixel shows)
+  // returns 0 on success, -1 on error
+  OSD_SetPalette, // (firstcolor{color},lastcolor{x0},data)
+  // Set a number of entries in the palette
+  // sets the entries "firstcolor" through "lastcolor" from the array "data"
+  // data has 4 byte for each color:
+  // R,G,B, and a opacity value: 0->transparent, 1..254->mix, 255->pixel
+  OSD_SetTrans,   // (transparency{color})
+  // Sets transparency of mixed pixel (0..15)
+  // returns 0 on success
+  OSD_SetPixel,   // (x0,y0,color)
+  // sets pixel <x>,<y> to color number <col>
+  // returns 0 on success, -1 on error
+  OSD_GetPixel,   // (x0,y0)
+  // returns color number of pixel <x>,<y>,  or -1
+  OSD_SetRow,     // (x0,y0,x1,data)
+  // fills pixels x0,y through  x1,y with the content of data[]
+  // returns 0 on success, -1 on clipping all pixel (no pixel drawn)
+  OSD_SetBlock,   // (x0,y0,x1,y1,increment{color},data)
+  // fills pixels x0,y0 through  x1,y1 with the content of data[]
+  // inc contains the width of one line in the data block,
+  // inc<=0 uses blockwidth as linewidth
+  // returns 0 on success, -1 on clipping all pixel
+  OSD_FillRow,    // (x0,y0,x1,color)
+  // fills pixels x0,y through  x1,y with the color <col>
+  // returns 0 on success, -1 on clipping all pixel
+  OSD_FillBlock,  // (x0,y0,x1,y1,color)
+  // fills pixels x0,y0 through  x1,y1 with the color <col>
+  // returns 0 on success, -1 on clipping all pixel
+  OSD_Line,       // (x0,y0,x1,y1,color)
+  // draw a line from x0,y0 to x1,y1 with the color <col>
+  // returns 0 on success
+  OSD_Query,      // (x0,y0,x1,y1,xasp{color}}), yasp=11
+  // fills parameters with the picture dimensions and the pixel aspect ratio
+  // returns 0 on success
+  OSD_Test,       // ()
+  // draws a test picture. for debugging purposes only
+  // returns 0 on success
+// TODO: remove "test" in final version
+  OSD_Text,       // (x0,y0,size,color,text)
+  OSD_SetWindow, //  (x0) set window with number 0<x0<8 as current
+  OSD_MoveWindow, //  move current window to (x0, y0)
+  OSD_OpenRaw,	// Open other types of OSD windows
+} OSD_Command;
+
+typedef struct osd_cmd_s {
+	OSD_Command cmd;
+	int x0;
+	int y0;
+	int x1;
+	int y1;
+	int color;
+	void __user *data;
+} osd_cmd_t;
+
+/* OSD_OpenRaw: set 'color' to desired window type */
+typedef enum {
+	OSD_BITMAP1,           /* 1 bit bitmap */
+	OSD_BITMAP2,           /* 2 bit bitmap */
+	OSD_BITMAP4,           /* 4 bit bitmap */
+	OSD_BITMAP8,           /* 8 bit bitmap */
+	OSD_BITMAP1HR,         /* 1 Bit bitmap half resolution */
+	OSD_BITMAP2HR,         /* 2 bit bitmap half resolution */
+	OSD_BITMAP4HR,         /* 4 bit bitmap half resolution */
+	OSD_BITMAP8HR,         /* 8 bit bitmap half resolution */
+	OSD_YCRCB422,          /* 4:2:2 YCRCB Graphic Display */
+	OSD_YCRCB444,          /* 4:4:4 YCRCB Graphic Display */
+	OSD_YCRCB444HR,        /* 4:4:4 YCRCB graphic half resolution */
+	OSD_VIDEOTSIZE,        /* True Size Normal MPEG Video Display */
+	OSD_VIDEOHSIZE,        /* MPEG Video Display Half Resolution */
+	OSD_VIDEOQSIZE,        /* MPEG Video Display Quarter Resolution */
+	OSD_VIDEODSIZE,        /* MPEG Video Display Double Resolution */
+	OSD_VIDEOTHSIZE,       /* True Size MPEG Video Display Half Resolution */
+	OSD_VIDEOTQSIZE,       /* True Size MPEG Video Display Quarter Resolution*/
+	OSD_VIDEOTDSIZE,       /* True Size MPEG Video Display Double Resolution */
+	OSD_VIDEONSIZE,        /* Full Size MPEG Video Display */
+	OSD_CURSOR             /* Cursor */
+} osd_raw_window_t;
+
+typedef struct osd_cap_s {
+	int  cmd;
+#define OSD_CAP_MEMSIZE         1  /* memory size */
+	long val;
+} osd_cap_t;
+
+
+#define OSD_SEND_CMD            _IOW('o', 160, osd_cmd_t)
+#define OSD_GET_CAPABILITY      _IOR('o', 161, osd_cap_t)
+
+#endif
diff --git a/include/linux/dvb/version.h b/include/linux/dvb/version.h
new file mode 100644
index 00000000..0559e2bd
--- /dev/null
+++ b/include/linux/dvb/version.h
@@ -0,0 +1,29 @@
+/*
+ * version.h
+ *
+ * Copyright (C) 2000 Holger Waechtler <holger@convergence.de>
+ *                    for convergence integrated media GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ */
+
+#ifndef _DVBVERSION_H_
+#define _DVBVERSION_H_
+
+#define DVB_API_VERSION 5
+#define DVB_API_VERSION_MINOR 5
+
+#endif /*_DVBVERSION_H_*/
diff --git a/include/linux/dvb/video.h b/include/linux/dvb/video.h
new file mode 100644
index 00000000..1d750c0f
--- /dev/null
+++ b/include/linux/dvb/video.h
@@ -0,0 +1,276 @@
+/*
+ * video.h
+ *
+ * Copyright (C) 2000 Marcus Metzler <marcus@convergence.de>
+ *                  & Ralph  Metzler <ralph@convergence.de>
+ *                    for convergence integrated media GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ */
+
+#ifndef _DVBVIDEO_H_
+#define _DVBVIDEO_H_
+
+#include <linux/types.h>
+#ifdef __KERNEL__
+#include <linux/compiler.h>
+#else
+#include <stdint.h>
+#include <time.h>
+#endif
+
+typedef enum {
+	VIDEO_FORMAT_4_3,     /* Select 4:3 format */
+	VIDEO_FORMAT_16_9,    /* Select 16:9 format. */
+	VIDEO_FORMAT_221_1    /* 2.21:1 */
+} video_format_t;
+
+
+typedef enum {
+	 VIDEO_SYSTEM_PAL,
+	 VIDEO_SYSTEM_NTSC,
+	 VIDEO_SYSTEM_PALN,
+	 VIDEO_SYSTEM_PALNc,
+	 VIDEO_SYSTEM_PALM,
+	 VIDEO_SYSTEM_NTSC60,
+	 VIDEO_SYSTEM_PAL60,
+	 VIDEO_SYSTEM_PALM60
+} video_system_t;
+
+
+typedef enum {
+	VIDEO_PAN_SCAN,       /* use pan and scan format */
+	VIDEO_LETTER_BOX,     /* use letterbox format */
+	VIDEO_CENTER_CUT_OUT  /* use center cut out format */
+} video_displayformat_t;
+
+typedef struct {
+	int w;
+	int h;
+	video_format_t aspect_ratio;
+} video_size_t;
+
+typedef enum {
+	VIDEO_SOURCE_DEMUX, /* Select the demux as the main source */
+	VIDEO_SOURCE_MEMORY /* If this source is selected, the stream
+			       comes from the user through the write
+			       system call */
+} video_stream_source_t;
+
+
+typedef enum {
+	VIDEO_STOPPED, /* Video is stopped */
+	VIDEO_PLAYING, /* Video is currently playing */
+	VIDEO_FREEZED  /* Video is freezed */
+} video_play_state_t;
+
+
+/* Decoder commands */
+#define VIDEO_CMD_PLAY        (0)
+#define VIDEO_CMD_STOP        (1)
+#define VIDEO_CMD_FREEZE      (2)
+#define VIDEO_CMD_CONTINUE    (3)
+
+/* Flags for VIDEO_CMD_FREEZE */
+#define VIDEO_CMD_FREEZE_TO_BLACK     	(1 << 0)
+
+/* Flags for VIDEO_CMD_STOP */
+#define VIDEO_CMD_STOP_TO_BLACK      	(1 << 0)
+#define VIDEO_CMD_STOP_IMMEDIATELY     	(1 << 1)
+
+/* Play input formats: */
+/* The decoder has no special format requirements */
+#define VIDEO_PLAY_FMT_NONE         (0)
+/* The decoder requires full GOPs */
+#define VIDEO_PLAY_FMT_GOP          (1)
+
+/* The structure must be zeroed before use by the application
+   This ensures it can be extended safely in the future. */
+struct video_command {
+	__u32 cmd;
+	__u32 flags;
+	union {
+		struct {
+			__u64 pts;
+		} stop;
+
+		struct {
+			/* 0 or 1000 specifies normal speed,
+			   1 specifies forward single stepping,
+			   -1 specifies backward single stepping,
+			   >1: playback at speed/1000 of the normal speed,
+			   <-1: reverse playback at (-speed/1000) of the normal speed. */
+			__s32 speed;
+			__u32 format;
+		} play;
+
+		struct {
+			__u32 data[16];
+		} raw;
+	};
+};
+
+/* FIELD_UNKNOWN can be used if the hardware does not know whether
+   the Vsync is for an odd, even or progressive (i.e. non-interlaced)
+   field. */
+#define VIDEO_VSYNC_FIELD_UNKNOWN  	(0)
+#define VIDEO_VSYNC_FIELD_ODD 		(1)
+#define VIDEO_VSYNC_FIELD_EVEN		(2)
+#define VIDEO_VSYNC_FIELD_PROGRESSIVE	(3)
+
+struct video_event {
+	__s32 type;
+#define VIDEO_EVENT_SIZE_CHANGED	1
+#define VIDEO_EVENT_FRAME_RATE_CHANGED	2
+#define VIDEO_EVENT_DECODER_STOPPED 	3
+#define VIDEO_EVENT_VSYNC 		4
+	__kernel_time_t timestamp;
+	union {
+		video_size_t size;
+		unsigned int frame_rate;	/* in frames per 1000sec */
+		unsigned char vsync_field;	/* unknown/odd/even/progressive */
+	} u;
+};
+
+
+struct video_status {
+	int                   video_blank;   /* blank video on freeze? */
+	video_play_state_t    play_state;    /* current state of playback */
+	video_stream_source_t stream_source; /* current source (demux/memory) */
+	video_format_t        video_format;  /* current aspect ratio of stream*/
+	video_displayformat_t display_format;/* selected cropping mode */
+};
+
+
+struct video_still_picture {
+	char __user *iFrame;        /* pointer to a single iframe in memory */
+	__s32 size;
+};
+
+
+typedef
+struct video_highlight {
+	int     active;      /*    1=show highlight, 0=hide highlight */
+	__u8    contrast1;   /*    7- 4  Pattern pixel contrast */
+			     /*    3- 0  Background pixel contrast */
+	__u8    contrast2;   /*    7- 4  Emphasis pixel-2 contrast */
+			     /*    3- 0  Emphasis pixel-1 contrast */
+	__u8    color1;      /*    7- 4  Pattern pixel color */
+			     /*    3- 0  Background pixel color */
+	__u8    color2;      /*    7- 4  Emphasis pixel-2 color */
+			     /*    3- 0  Emphasis pixel-1 color */
+	__u32    ypos;       /*   23-22  auto action mode */
+			     /*   21-12  start y */
+			     /*    9- 0  end y */
+	__u32    xpos;       /*   23-22  button color number */
+			     /*   21-12  start x */
+			     /*    9- 0  end x */
+} video_highlight_t;
+
+
+typedef struct video_spu {
+	int active;
+	int stream_id;
+} video_spu_t;
+
+
+typedef struct video_spu_palette {      /* SPU Palette information */
+	int length;
+	__u8 __user *palette;
+} video_spu_palette_t;
+
+
+typedef struct video_navi_pack {
+	int length;          /* 0 ... 1024 */
+	__u8 data[1024];
+} video_navi_pack_t;
+
+
+typedef __u16 video_attributes_t;
+/*   bits: descr. */
+/*   15-14 Video compression mode (0=MPEG-1, 1=MPEG-2) */
+/*   13-12 TV system (0=525/60, 1=625/50) */
+/*   11-10 Aspect ratio (0=4:3, 3=16:9) */
+/*    9- 8 permitted display mode on 4:3 monitor (0=both, 1=only pan-sca */
+/*    7    line 21-1 data present in GOP (1=yes, 0=no) */
+/*    6    line 21-2 data present in GOP (1=yes, 0=no) */
+/*    5- 3 source resolution (0=720x480/576, 1=704x480/576, 2=352x480/57 */
+/*    2    source letterboxed (1=yes, 0=no) */
+/*    0    film/camera mode (0=camera, 1=film (625/50 only)) */
+
+
+/* bit definitions for capabilities: */
+/* can the hardware decode MPEG1 and/or MPEG2? */
+#define VIDEO_CAP_MPEG1   1
+#define VIDEO_CAP_MPEG2   2
+/* can you send a system and/or program stream to video device?
+   (you still have to open the video and the audio device but only
+    send the stream to the video device) */
+#define VIDEO_CAP_SYS     4
+#define VIDEO_CAP_PROG    8
+/* can the driver also handle SPU, NAVI and CSS encoded data?
+   (CSS API is not present yet) */
+#define VIDEO_CAP_SPU    16
+#define VIDEO_CAP_NAVI   32
+#define VIDEO_CAP_CSS    64
+
+
+#define VIDEO_STOP                 _IO('o', 21)
+#define VIDEO_PLAY                 _IO('o', 22)
+#define VIDEO_FREEZE               _IO('o', 23)
+#define VIDEO_CONTINUE             _IO('o', 24)
+#define VIDEO_SELECT_SOURCE        _IO('o', 25)
+#define VIDEO_SET_BLANK            _IO('o', 26)
+#define VIDEO_GET_STATUS           _IOR('o', 27, struct video_status)
+#define VIDEO_GET_EVENT            _IOR('o', 28, struct video_event)
+#define VIDEO_SET_DISPLAY_FORMAT   _IO('o', 29)
+#define VIDEO_STILLPICTURE         _IOW('o', 30, struct video_still_picture)
+#define VIDEO_FAST_FORWARD         _IO('o', 31)
+#define VIDEO_SLOWMOTION           _IO('o', 32)
+#define VIDEO_GET_CAPABILITIES     _IOR('o', 33, unsigned int)
+#define VIDEO_CLEAR_BUFFER         _IO('o',  34)
+#define VIDEO_SET_ID               _IO('o', 35)
+#define VIDEO_SET_STREAMTYPE       _IO('o', 36)
+#define VIDEO_SET_FORMAT           _IO('o', 37)
+#define VIDEO_SET_SYSTEM           _IO('o', 38)
+#define VIDEO_SET_HIGHLIGHT        _IOW('o', 39, video_highlight_t)
+#define VIDEO_SET_SPU              _IOW('o', 50, video_spu_t)
+#define VIDEO_SET_SPU_PALETTE      _IOW('o', 51, video_spu_palette_t)
+#define VIDEO_GET_NAVI             _IOR('o', 52, video_navi_pack_t)
+#define VIDEO_SET_ATTRIBUTES       _IO('o', 53)
+#define VIDEO_GET_SIZE             _IOR('o', 55, video_size_t)
+#define VIDEO_GET_FRAME_RATE       _IOR('o', 56, unsigned int)
+
+/**
+ * VIDEO_GET_PTS
+ *
+ * Read the 33 bit presentation time stamp as defined
+ * in ITU T-REC-H.222.0 / ISO/IEC 13818-1.
+ *
+ * The PTS should belong to the currently played
+ * frame if possible, but may also be a value close to it
+ * like the PTS of the last decoded frame or the last PTS
+ * extracted by the PES parser.
+ */
+#define VIDEO_GET_PTS              _IOR('o', 57, __u64)
+
+/* Read the number of displayed frames since the decoder was started */
+#define VIDEO_GET_FRAME_COUNT  	   _IOR('o', 58, __u64)
+
+#define VIDEO_COMMAND     	   _IOWR('o', 59, struct video_command)
+#define VIDEO_TRY_COMMAND 	   _IOWR('o', 60, struct video_command)
+
+#endif /*_DVBVIDEO_H_*/
diff --git a/include/linux/dw_apb_timer.h b/include/linux/dw_apb_timer.h
new file mode 100644
index 00000000..07261d52
--- /dev/null
+++ b/include/linux/dw_apb_timer.h
@@ -0,0 +1,56 @@
+/*
+ * (C) Copyright 2009 Intel Corporation
+ * Author: Jacob Pan (jacob.jun.pan@intel.com)
+ *
+ * Shared with ARM platforms, Jamie Iles, Picochip 2011
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Support for the Synopsys DesignWare APB Timers.
+ */
+#ifndef __DW_APB_TIMER_H__
+#define __DW_APB_TIMER_H__
+
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+
+#define APBTMRS_REG_SIZE       0x14
+
+struct dw_apb_timer {
+	void __iomem				*base;
+	unsigned long				freq;
+	int					irq;
+};
+
+struct dw_apb_clock_event_device {
+	struct clock_event_device		ced;
+	struct dw_apb_timer			timer;
+	struct irqaction			irqaction;
+	void					(*eoi)(struct dw_apb_timer *);
+};
+
+struct dw_apb_clocksource {
+	struct dw_apb_timer			timer;
+	struct clocksource			cs;
+};
+
+void dw_apb_clockevent_register(struct dw_apb_clock_event_device *dw_ced);
+void dw_apb_clockevent_pause(struct dw_apb_clock_event_device *dw_ced);
+void dw_apb_clockevent_resume(struct dw_apb_clock_event_device *dw_ced);
+void dw_apb_clockevent_stop(struct dw_apb_clock_event_device *dw_ced);
+
+struct dw_apb_clock_event_device *
+dw_apb_clockevent_init(int cpu, const char *name, unsigned rating,
+		       void __iomem *base, int irq, unsigned long freq);
+struct dw_apb_clocksource *
+dw_apb_clocksource_init(unsigned rating, const char *name, void __iomem *base,
+			unsigned long freq);
+void dw_apb_clocksource_register(struct dw_apb_clocksource *dw_cs);
+void dw_apb_clocksource_start(struct dw_apb_clocksource *dw_cs);
+cycle_t dw_apb_clocksource_read(struct dw_apb_clocksource *dw_cs);
+void dw_apb_clocksource_unregister(struct dw_apb_clocksource *dw_cs);
+
+#endif /* __DW_APB_TIMER_H__ */
diff --git a/include/linux/dw_dmac.h b/include/linux/dw_dmac.h
new file mode 100644
index 00000000..2412e02d
--- /dev/null
+++ b/include/linux/dw_dmac.h
@@ -0,0 +1,101 @@
+/*
+ * Driver for the Synopsys DesignWare DMA Controller (aka DMACA on
+ * AVR32 systems.)
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ * Copyright (C) 2010-2011 ST Microelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef DW_DMAC_H
+#define DW_DMAC_H
+
+#include <linux/dmaengine.h>
+
+/**
+ * struct dw_dma_platform_data - Controller configuration parameters
+ * @nr_channels: Number of channels supported by hardware (max 8)
+ * @is_private: The device channels should be marked as private and not for
+ *	by the general purpose DMA channel allocator.
+ */
+struct dw_dma_platform_data {
+	unsigned int	nr_channels;
+	bool		is_private;
+#define CHAN_ALLOCATION_ASCENDING	0	/* zero to seven */
+#define CHAN_ALLOCATION_DESCENDING	1	/* seven to zero */
+	unsigned char	chan_allocation_order;
+#define CHAN_PRIORITY_ASCENDING		0	/* chan0 highest */
+#define CHAN_PRIORITY_DESCENDING	1	/* chan7 highest */
+	unsigned char	chan_priority;
+};
+
+/* bursts size */
+enum dw_dma_msize {
+	DW_DMA_MSIZE_1,
+	DW_DMA_MSIZE_4,
+	DW_DMA_MSIZE_8,
+	DW_DMA_MSIZE_16,
+	DW_DMA_MSIZE_32,
+	DW_DMA_MSIZE_64,
+	DW_DMA_MSIZE_128,
+	DW_DMA_MSIZE_256,
+};
+
+/**
+ * struct dw_dma_slave - Controller-specific information about a slave
+ *
+ * @dma_dev: required DMA master device
+ * @cfg_hi: Platform-specific initializer for the CFG_HI register
+ * @cfg_lo: Platform-specific initializer for the CFG_LO register
+ * @src_master: src master for transfers on allocated channel.
+ * @dst_master: dest master for transfers on allocated channel.
+ */
+struct dw_dma_slave {
+	struct device		*dma_dev;
+	u32			cfg_hi;
+	u32			cfg_lo;
+	u8			src_master;
+	u8			dst_master;
+};
+
+/* Platform-configurable bits in CFG_HI */
+#define DWC_CFGH_FCMODE		(1 << 0)
+#define DWC_CFGH_FIFO_MODE	(1 << 1)
+#define DWC_CFGH_PROTCTL(x)	((x) << 2)
+#define DWC_CFGH_SRC_PER(x)	((x) << 7)
+#define DWC_CFGH_DST_PER(x)	((x) << 11)
+
+/* Platform-configurable bits in CFG_LO */
+#define DWC_CFGL_LOCK_CH_XFER	(0 << 12)	/* scope of LOCK_CH */
+#define DWC_CFGL_LOCK_CH_BLOCK	(1 << 12)
+#define DWC_CFGL_LOCK_CH_XACT	(2 << 12)
+#define DWC_CFGL_LOCK_BUS_XFER	(0 << 14)	/* scope of LOCK_BUS */
+#define DWC_CFGL_LOCK_BUS_BLOCK	(1 << 14)
+#define DWC_CFGL_LOCK_BUS_XACT	(2 << 14)
+#define DWC_CFGL_LOCK_CH	(1 << 15)	/* channel lockout */
+#define DWC_CFGL_LOCK_BUS	(1 << 16)	/* busmaster lockout */
+#define DWC_CFGL_HS_DST_POL	(1 << 18)	/* dst handshake active low */
+#define DWC_CFGL_HS_SRC_POL	(1 << 19)	/* src handshake active low */
+
+/* DMA API extensions */
+struct dw_cyclic_desc {
+	struct dw_desc	**desc;
+	unsigned long	periods;
+	void		(*period_callback)(void *param);
+	void		*period_callback_param;
+};
+
+struct dw_cyclic_desc *dw_dma_cyclic_prep(struct dma_chan *chan,
+		dma_addr_t buf_addr, size_t buf_len, size_t period_len,
+		enum dma_transfer_direction direction);
+void dw_dma_cyclic_free(struct dma_chan *chan);
+int dw_dma_cyclic_start(struct dma_chan *chan);
+void dw_dma_cyclic_stop(struct dma_chan *chan);
+
+dma_addr_t dw_dma_get_src_addr(struct dma_chan *chan);
+
+dma_addr_t dw_dma_get_dst_addr(struct dma_chan *chan);
+
+#endif /* DW_DMAC_H */
diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h
new file mode 100644
index 00000000..7e3c53a9
--- /dev/null
+++ b/include/linux/dynamic_debug.h
@@ -0,0 +1,108 @@
+#ifndef _DYNAMIC_DEBUG_H
+#define _DYNAMIC_DEBUG_H
+
+/*
+ * An instance of this structure is created in a special
+ * ELF section at every dynamic debug callsite.  At runtime,
+ * the special section is treated as an array of these.
+ */
+struct _ddebug {
+	/*
+	 * These fields are used to drive the user interface
+	 * for selecting and displaying debug callsites.
+	 */
+	const char *modname;
+	const char *function;
+	const char *filename;
+	const char *format;
+	unsigned int lineno:18;
+	/*
+ 	 * The flags field controls the behaviour at the callsite.
+ 	 * The bits here are changed dynamically when the user
+	 * writes commands to <debugfs>/dynamic_debug/control
+	 */
+#define _DPRINTK_FLAGS_NONE	0
+#define _DPRINTK_FLAGS_PRINT	(1<<0) /* printk() a message using the format */
+#define _DPRINTK_FLAGS_INCL_MODNAME	(1<<1)
+#define _DPRINTK_FLAGS_INCL_FUNCNAME	(1<<2)
+#define _DPRINTK_FLAGS_INCL_LINENO	(1<<3)
+#define _DPRINTK_FLAGS_INCL_TID		(1<<4)
+#if defined DEBUG
+#define _DPRINTK_FLAGS_DEFAULT _DPRINTK_FLAGS_PRINT
+#else
+#define _DPRINTK_FLAGS_DEFAULT 0
+#endif
+	unsigned int flags:8;
+} __attribute__((aligned(8)));
+
+
+int ddebug_add_module(struct _ddebug *tab, unsigned int n,
+				const char *modname);
+
+#if defined(CONFIG_DYNAMIC_DEBUG)
+extern int ddebug_remove_module(const char *mod_name);
+extern __printf(2, 3)
+int __dynamic_pr_debug(struct _ddebug *descriptor, const char *fmt, ...);
+
+struct device;
+
+extern __printf(3, 4)
+int __dynamic_dev_dbg(struct _ddebug *descriptor, const struct device *dev,
+		      const char *fmt, ...);
+
+struct net_device;
+
+extern __printf(3, 4)
+int __dynamic_netdev_dbg(struct _ddebug *descriptor,
+			 const struct net_device *dev,
+			 const char *fmt, ...);
+
+#define DEFINE_DYNAMIC_DEBUG_METADATA(name, fmt)		\
+	static struct _ddebug __used __aligned(8)		\
+	__attribute__((section("__verbose"))) name = {		\
+		.modname = KBUILD_MODNAME,			\
+		.function = __func__,				\
+		.filename = __FILE__,				\
+		.format = (fmt),				\
+		.lineno = __LINE__,				\
+		.flags =  _DPRINTK_FLAGS_DEFAULT,		\
+	}
+
+#define dynamic_pr_debug(fmt, ...)				\
+do {								\
+	DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt);		\
+	if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT))	\
+		__dynamic_pr_debug(&descriptor, pr_fmt(fmt),	\
+				   ##__VA_ARGS__);		\
+} while (0)
+
+#define dynamic_dev_dbg(dev, fmt, ...)				\
+do {								\
+	DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt);		\
+	if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT))	\
+		__dynamic_dev_dbg(&descriptor, dev, fmt,	\
+				  ##__VA_ARGS__);		\
+} while (0)
+
+#define dynamic_netdev_dbg(dev, fmt, ...)			\
+do {								\
+	DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt);		\
+	if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT))	\
+		__dynamic_netdev_dbg(&descriptor, dev, fmt,	\
+				     ##__VA_ARGS__);		\
+} while (0)
+
+#else
+
+static inline int ddebug_remove_module(const char *mod)
+{
+	return 0;
+}
+
+#define dynamic_pr_debug(fmt, ...)					\
+	do { if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); } while (0)
+#define dynamic_dev_dbg(dev, fmt, ...)					\
+	do { if (0) dev_printk(KERN_DEBUG, dev, fmt, ##__VA_ARGS__); } while (0)
+#endif
+
+#endif
diff --git a/include/linux/dynamic_queue_limits.h b/include/linux/dynamic_queue_limits.h
new file mode 100644
index 00000000..5621547d
--- /dev/null
+++ b/include/linux/dynamic_queue_limits.h
@@ -0,0 +1,97 @@
+/*
+ * Dynamic queue limits (dql) - Definitions
+ *
+ * Copyright (c) 2011, Tom Herbert <therbert@google.com>
+ *
+ * This header file contains the definitions for dynamic queue limits (dql).
+ * dql would be used in conjunction with a producer/consumer type queue
+ * (possibly a HW queue).  Such a queue would have these general properties:
+ *
+ *   1) Objects are queued up to some limit specified as number of objects.
+ *   2) Periodically a completion process executes which retires consumed
+ *      objects.
+ *   3) Starvation occurs when limit has been reached, all queued data has
+ *      actually been consumed, but completion processing has not yet run
+ *      so queuing new data is blocked.
+ *   4) Minimizing the amount of queued data is desirable.
+ *
+ * The goal of dql is to calculate the limit as the minimum number of objects
+ * needed to prevent starvation.
+ *
+ * The primary functions of dql are:
+ *    dql_queued - called when objects are enqueued to record number of objects
+ *    dql_avail - returns how many objects are available to be queued based
+ *      on the object limit and how many objects are already enqueued
+ *    dql_completed - called at completion time to indicate how many objects
+ *      were retired from the queue
+ *
+ * The dql implementation does not implement any locking for the dql data
+ * structures, the higher layer should provide this.  dql_queued should
+ * be serialized to prevent concurrent execution of the function; this
+ * is also true for  dql_completed.  However, dql_queued and dlq_completed  can
+ * be executed concurrently (i.e. they can be protected by different locks).
+ */
+
+#ifndef _LINUX_DQL_H
+#define _LINUX_DQL_H
+
+#ifdef __KERNEL__
+
+struct dql {
+	/* Fields accessed in enqueue path (dql_queued) */
+	unsigned int	num_queued;		/* Total ever queued */
+	unsigned int	adj_limit;		/* limit + num_completed */
+	unsigned int	last_obj_cnt;		/* Count at last queuing */
+
+	/* Fields accessed only by completion path (dql_completed) */
+
+	unsigned int	limit ____cacheline_aligned_in_smp; /* Current limit */
+	unsigned int	num_completed;		/* Total ever completed */
+
+	unsigned int	prev_ovlimit;		/* Previous over limit */
+	unsigned int	prev_num_queued;	/* Previous queue total */
+	unsigned int	prev_last_obj_cnt;	/* Previous queuing cnt */
+
+	unsigned int	lowest_slack;		/* Lowest slack found */
+	unsigned long	slack_start_time;	/* Time slacks seen */
+
+	/* Configuration */
+	unsigned int	max_limit;		/* Max limit */
+	unsigned int	min_limit;		/* Minimum limit */
+	unsigned int	slack_hold_time;	/* Time to measure slack */
+};
+
+/* Set some static maximums */
+#define DQL_MAX_OBJECT (UINT_MAX / 16)
+#define DQL_MAX_LIMIT ((UINT_MAX / 2) - DQL_MAX_OBJECT)
+
+/*
+ * Record number of objects queued. Assumes that caller has already checked
+ * availability in the queue with dql_avail.
+ */
+static inline void dql_queued(struct dql *dql, unsigned int count)
+{
+	BUG_ON(count > DQL_MAX_OBJECT);
+
+	dql->num_queued += count;
+	dql->last_obj_cnt = count;
+}
+
+/* Returns how many objects can be queued, < 0 indicates over limit. */
+static inline int dql_avail(const struct dql *dql)
+{
+	return dql->adj_limit - dql->num_queued;
+}
+
+/* Record number of completed objects and recalculate the limit. */
+void dql_completed(struct dql *dql, unsigned int count);
+
+/* Reset dql state */
+void dql_reset(struct dql *dql);
+
+/* Initialize dql state */
+int dql_init(struct dql *dql, unsigned hold_time);
+
+#endif /* _KERNEL_ */
+
+#endif /* _LINUX_DQL_H */
diff --git a/include/linux/ecryptfs.h b/include/linux/ecryptfs.h
new file mode 100644
index 00000000..2224a8c0
--- /dev/null
+++ b/include/linux/ecryptfs.h
@@ -0,0 +1,113 @@
+#ifndef _LINUX_ECRYPTFS_H
+#define _LINUX_ECRYPTFS_H
+
+/* Version verification for shared data structures w/ userspace */
+#define ECRYPTFS_VERSION_MAJOR 0x00
+#define ECRYPTFS_VERSION_MINOR 0x04
+#define ECRYPTFS_SUPPORTED_FILE_VERSION 0x03
+/* These flags indicate which features are supported by the kernel
+ * module; userspace tools such as the mount helper read
+ * ECRYPTFS_VERSIONING_MASK from a sysfs handle in order to determine
+ * how to behave. */
+#define ECRYPTFS_VERSIONING_PASSPHRASE            0x00000001
+#define ECRYPTFS_VERSIONING_PUBKEY                0x00000002
+#define ECRYPTFS_VERSIONING_PLAINTEXT_PASSTHROUGH 0x00000004
+#define ECRYPTFS_VERSIONING_POLICY                0x00000008
+#define ECRYPTFS_VERSIONING_XATTR                 0x00000010
+#define ECRYPTFS_VERSIONING_MULTKEY               0x00000020
+#define ECRYPTFS_VERSIONING_DEVMISC               0x00000040
+#define ECRYPTFS_VERSIONING_HMAC                  0x00000080
+#define ECRYPTFS_VERSIONING_FILENAME_ENCRYPTION   0x00000100
+#define ECRYPTFS_VERSIONING_GCM                   0x00000200
+#define ECRYPTFS_VERSIONING_MASK (ECRYPTFS_VERSIONING_PASSPHRASE \
+				  | ECRYPTFS_VERSIONING_PLAINTEXT_PASSTHROUGH \
+				  | ECRYPTFS_VERSIONING_PUBKEY \
+				  | ECRYPTFS_VERSIONING_XATTR \
+				  | ECRYPTFS_VERSIONING_MULTKEY \
+				  | ECRYPTFS_VERSIONING_DEVMISC \
+				  | ECRYPTFS_VERSIONING_FILENAME_ENCRYPTION)
+#define ECRYPTFS_MAX_PASSWORD_LENGTH 64
+#define ECRYPTFS_MAX_PASSPHRASE_BYTES ECRYPTFS_MAX_PASSWORD_LENGTH
+#define ECRYPTFS_SALT_SIZE 8
+#define ECRYPTFS_SALT_SIZE_HEX (ECRYPTFS_SALT_SIZE*2)
+/* The original signature size is only for what is stored on disk; all
+ * in-memory representations are expanded hex, so it better adapted to
+ * be passed around or referenced on the command line */
+#define ECRYPTFS_SIG_SIZE 8
+#define ECRYPTFS_SIG_SIZE_HEX (ECRYPTFS_SIG_SIZE*2)
+#define ECRYPTFS_PASSWORD_SIG_SIZE ECRYPTFS_SIG_SIZE_HEX
+#define ECRYPTFS_MAX_KEY_BYTES 64
+#define ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES 512
+#define ECRYPTFS_FILE_VERSION 0x03
+#define ECRYPTFS_MAX_PKI_NAME_BYTES 16
+
+#define RFC2440_CIPHER_DES3_EDE 0x02
+#define RFC2440_CIPHER_CAST_5 0x03
+#define RFC2440_CIPHER_BLOWFISH 0x04
+#define RFC2440_CIPHER_AES_128 0x07
+#define RFC2440_CIPHER_AES_192 0x08
+#define RFC2440_CIPHER_AES_256 0x09
+#define RFC2440_CIPHER_TWOFISH 0x0a
+#define RFC2440_CIPHER_CAST_6 0x0b
+
+#define RFC2440_CIPHER_RSA 0x01
+
+/**
+ * For convenience, we may need to pass around the encrypted session
+ * key between kernel and userspace because the authentication token
+ * may not be extractable.  For example, the TPM may not release the
+ * private key, instead requiring the encrypted data and returning the
+ * decrypted data.
+ */
+struct ecryptfs_session_key {
+#define ECRYPTFS_USERSPACE_SHOULD_TRY_TO_DECRYPT 0x00000001
+#define ECRYPTFS_USERSPACE_SHOULD_TRY_TO_ENCRYPT 0x00000002
+#define ECRYPTFS_CONTAINS_DECRYPTED_KEY 0x00000004
+#define ECRYPTFS_CONTAINS_ENCRYPTED_KEY 0x00000008
+	u32 flags;
+	u32 encrypted_key_size;
+	u32 decrypted_key_size;
+	u8 encrypted_key[ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES];
+	u8 decrypted_key[ECRYPTFS_MAX_KEY_BYTES];
+};
+
+struct ecryptfs_password {
+	u32 password_bytes;
+	s32 hash_algo;
+	u32 hash_iterations;
+	u32 session_key_encryption_key_bytes;
+#define ECRYPTFS_PERSISTENT_PASSWORD 0x01
+#define ECRYPTFS_SESSION_KEY_ENCRYPTION_KEY_SET 0x02
+	u32 flags;
+	/* Iterated-hash concatenation of salt and passphrase */
+	u8 session_key_encryption_key[ECRYPTFS_MAX_KEY_BYTES];
+	u8 signature[ECRYPTFS_PASSWORD_SIG_SIZE + 1];
+	/* Always in expanded hex */
+	u8 salt[ECRYPTFS_SALT_SIZE];
+};
+
+enum ecryptfs_token_types {ECRYPTFS_PASSWORD, ECRYPTFS_PRIVATE_KEY};
+
+struct ecryptfs_private_key {
+	u32 key_size;
+	u32 data_len;
+	u8 signature[ECRYPTFS_PASSWORD_SIG_SIZE + 1];
+	char pki_type[ECRYPTFS_MAX_PKI_NAME_BYTES + 1];
+	u8 data[];
+};
+
+/* May be a password or a private key */
+struct ecryptfs_auth_tok {
+	u16 version; /* 8-bit major and 8-bit minor */
+	u16 token_type;
+#define ECRYPTFS_ENCRYPT_ONLY 0x00000001
+	u32 flags;
+	struct ecryptfs_session_key session_key;
+	u8 reserved[32];
+	union {
+		struct ecryptfs_password password;
+		struct ecryptfs_private_key private_key;
+	} token;
+} __attribute__ ((packed));
+
+#endif /* _LINUX_ECRYPTFS_H */
diff --git a/include/linux/edac.h b/include/linux/edac.h
new file mode 100644
index 00000000..c621d762
--- /dev/null
+++ b/include/linux/edac.h
@@ -0,0 +1,476 @@
+/*
+ * Generic EDAC defs
+ *
+ * Author: Dave Jiang <djiang@mvista.com>
+ *
+ * 2006-2008 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+#ifndef _LINUX_EDAC_H_
+#define _LINUX_EDAC_H_
+
+#include <linux/atomic.h>
+#include <linux/kobject.h>
+#include <linux/completion.h>
+#include <linux/workqueue.h>
+
+struct device;
+
+#define EDAC_OPSTATE_INVAL	-1
+#define EDAC_OPSTATE_POLL	0
+#define EDAC_OPSTATE_NMI	1
+#define EDAC_OPSTATE_INT	2
+
+extern int edac_op_state;
+extern int edac_err_assert;
+extern atomic_t edac_handlers;
+extern struct bus_type edac_subsys;
+
+extern int edac_handler_set(void);
+extern void edac_atomic_assert_error(void);
+extern struct bus_type *edac_get_sysfs_subsys(void);
+extern void edac_put_sysfs_subsys(void);
+
+static inline void opstate_init(void)
+{
+	switch (edac_op_state) {
+	case EDAC_OPSTATE_POLL:
+	case EDAC_OPSTATE_NMI:
+		break;
+	default:
+		edac_op_state = EDAC_OPSTATE_POLL;
+	}
+	return;
+}
+
+#define EDAC_MC_LABEL_LEN	31
+#define MC_PROC_NAME_MAX_LEN	7
+
+/* memory devices */
+enum dev_type {
+	DEV_UNKNOWN = 0,
+	DEV_X1,
+	DEV_X2,
+	DEV_X4,
+	DEV_X8,
+	DEV_X16,
+	DEV_X32,		/* Do these parts exist? */
+	DEV_X64			/* Do these parts exist? */
+};
+
+#define DEV_FLAG_UNKNOWN	BIT(DEV_UNKNOWN)
+#define DEV_FLAG_X1		BIT(DEV_X1)
+#define DEV_FLAG_X2		BIT(DEV_X2)
+#define DEV_FLAG_X4		BIT(DEV_X4)
+#define DEV_FLAG_X8		BIT(DEV_X8)
+#define DEV_FLAG_X16		BIT(DEV_X16)
+#define DEV_FLAG_X32		BIT(DEV_X32)
+#define DEV_FLAG_X64		BIT(DEV_X64)
+
+/**
+ * enum mem_type - memory types. For a more detailed reference, please see
+ *			http://en.wikipedia.org/wiki/DRAM
+ *
+ * @MEM_EMPTY		Empty csrow
+ * @MEM_RESERVED:	Reserved csrow type
+ * @MEM_UNKNOWN:	Unknown csrow type
+ * @MEM_FPM:		FPM - Fast Page Mode, used on systems up to 1995.
+ * @MEM_EDO:		EDO - Extended data out, used on systems up to 1998.
+ * @MEM_BEDO:		BEDO - Burst Extended data out, an EDO variant.
+ * @MEM_SDR:		SDR - Single data rate SDRAM
+ *			http://en.wikipedia.org/wiki/Synchronous_dynamic_random-access_memory
+ *			They use 3 pins for chip select: Pins 0 and 2 are
+ *			for rank 0; pins 1 and 3 are for rank 1, if the memory
+ *			is dual-rank.
+ * @MEM_RDR:		Registered SDR SDRAM
+ * @MEM_DDR:		Double data rate SDRAM
+ *			http://en.wikipedia.org/wiki/DDR_SDRAM
+ * @MEM_RDDR:		Registered Double data rate SDRAM
+ *			This is a variant of the DDR memories.
+ *			A registered memory has a buffer inside it, hiding
+ *			part of the memory details to the memory controller.
+ * @MEM_RMBS:		Rambus DRAM, used on a few Pentium III/IV controllers.
+ * @MEM_DDR2:		DDR2 RAM, as described at JEDEC JESD79-2F.
+ *			Those memories are labed as "PC2-" instead of "PC" to
+ *			differenciate from DDR.
+ * @MEM_FB_DDR2:	Fully-Buffered DDR2, as described at JEDEC Std No. 205
+ *			and JESD206.
+ *			Those memories are accessed per DIMM slot, and not by
+ *			a chip select signal.
+ * @MEM_RDDR2:		Registered DDR2 RAM
+ *			This is a variant of the DDR2 memories.
+ * @MEM_XDR:		Rambus XDR
+ *			It is an evolution of the original RAMBUS memories,
+ *			created to compete with DDR2. Weren't used on any
+ *			x86 arch, but cell_edac PPC memory controller uses it.
+ * @MEM_DDR3:		DDR3 RAM
+ * @MEM_RDDR3:		Registered DDR3 RAM
+ *			This is a variant of the DDR3 memories.
+ */
+enum mem_type {
+	MEM_EMPTY = 0,
+	MEM_RESERVED,
+	MEM_UNKNOWN,
+	MEM_FPM,
+	MEM_EDO,
+	MEM_BEDO,
+	MEM_SDR,
+	MEM_RDR,
+	MEM_DDR,
+	MEM_RDDR,
+	MEM_RMBS,
+	MEM_DDR2,
+	MEM_FB_DDR2,
+	MEM_RDDR2,
+	MEM_XDR,
+	MEM_DDR3,
+	MEM_RDDR3,
+};
+
+#define MEM_FLAG_EMPTY		BIT(MEM_EMPTY)
+#define MEM_FLAG_RESERVED	BIT(MEM_RESERVED)
+#define MEM_FLAG_UNKNOWN	BIT(MEM_UNKNOWN)
+#define MEM_FLAG_FPM		BIT(MEM_FPM)
+#define MEM_FLAG_EDO		BIT(MEM_EDO)
+#define MEM_FLAG_BEDO		BIT(MEM_BEDO)
+#define MEM_FLAG_SDR		BIT(MEM_SDR)
+#define MEM_FLAG_RDR		BIT(MEM_RDR)
+#define MEM_FLAG_DDR		BIT(MEM_DDR)
+#define MEM_FLAG_RDDR		BIT(MEM_RDDR)
+#define MEM_FLAG_RMBS		BIT(MEM_RMBS)
+#define MEM_FLAG_DDR2           BIT(MEM_DDR2)
+#define MEM_FLAG_FB_DDR2        BIT(MEM_FB_DDR2)
+#define MEM_FLAG_RDDR2          BIT(MEM_RDDR2)
+#define MEM_FLAG_XDR            BIT(MEM_XDR)
+#define MEM_FLAG_DDR3		 BIT(MEM_DDR3)
+#define MEM_FLAG_RDDR3		 BIT(MEM_RDDR3)
+
+/* chipset Error Detection and Correction capabilities and mode */
+enum edac_type {
+	EDAC_UNKNOWN = 0,	/* Unknown if ECC is available */
+	EDAC_NONE,		/* Doesn't support ECC */
+	EDAC_RESERVED,		/* Reserved ECC type */
+	EDAC_PARITY,		/* Detects parity errors */
+	EDAC_EC,		/* Error Checking - no correction */
+	EDAC_SECDED,		/* Single bit error correction, Double detection */
+	EDAC_S2ECD2ED,		/* Chipkill x2 devices - do these exist? */
+	EDAC_S4ECD4ED,		/* Chipkill x4 devices */
+	EDAC_S8ECD8ED,		/* Chipkill x8 devices */
+	EDAC_S16ECD16ED,	/* Chipkill x16 devices */
+};
+
+#define EDAC_FLAG_UNKNOWN	BIT(EDAC_UNKNOWN)
+#define EDAC_FLAG_NONE		BIT(EDAC_NONE)
+#define EDAC_FLAG_PARITY	BIT(EDAC_PARITY)
+#define EDAC_FLAG_EC		BIT(EDAC_EC)
+#define EDAC_FLAG_SECDED	BIT(EDAC_SECDED)
+#define EDAC_FLAG_S2ECD2ED	BIT(EDAC_S2ECD2ED)
+#define EDAC_FLAG_S4ECD4ED	BIT(EDAC_S4ECD4ED)
+#define EDAC_FLAG_S8ECD8ED	BIT(EDAC_S8ECD8ED)
+#define EDAC_FLAG_S16ECD16ED	BIT(EDAC_S16ECD16ED)
+
+/* scrubbing capabilities */
+enum scrub_type {
+	SCRUB_UNKNOWN = 0,	/* Unknown if scrubber is available */
+	SCRUB_NONE,		/* No scrubber */
+	SCRUB_SW_PROG,		/* SW progressive (sequential) scrubbing */
+	SCRUB_SW_SRC,		/* Software scrub only errors */
+	SCRUB_SW_PROG_SRC,	/* Progressive software scrub from an error */
+	SCRUB_SW_TUNABLE,	/* Software scrub frequency is tunable */
+	SCRUB_HW_PROG,		/* HW progressive (sequential) scrubbing */
+	SCRUB_HW_SRC,		/* Hardware scrub only errors */
+	SCRUB_HW_PROG_SRC,	/* Progressive hardware scrub from an error */
+	SCRUB_HW_TUNABLE	/* Hardware scrub frequency is tunable */
+};
+
+#define SCRUB_FLAG_SW_PROG	BIT(SCRUB_SW_PROG)
+#define SCRUB_FLAG_SW_SRC	BIT(SCRUB_SW_SRC)
+#define SCRUB_FLAG_SW_PROG_SRC	BIT(SCRUB_SW_PROG_SRC)
+#define SCRUB_FLAG_SW_TUN	BIT(SCRUB_SW_SCRUB_TUNABLE)
+#define SCRUB_FLAG_HW_PROG	BIT(SCRUB_HW_PROG)
+#define SCRUB_FLAG_HW_SRC	BIT(SCRUB_HW_SRC)
+#define SCRUB_FLAG_HW_PROG_SRC	BIT(SCRUB_HW_PROG_SRC)
+#define SCRUB_FLAG_HW_TUN	BIT(SCRUB_HW_TUNABLE)
+
+/* FIXME - should have notify capabilities: NMI, LOG, PROC, etc */
+
+/* EDAC internal operation states */
+#define	OP_ALLOC		0x100
+#define OP_RUNNING_POLL		0x201
+#define OP_RUNNING_INTERRUPT	0x202
+#define OP_RUNNING_POLL_INTR	0x203
+#define OP_OFFLINE		0x300
+
+/*
+ * Concepts used at the EDAC subsystem
+ *
+ * There are several things to be aware of that aren't at all obvious:
+ *
+ * SOCKETS, SOCKET SETS, BANKS, ROWS, CHIP-SELECT ROWS, CHANNELS, etc..
+ *
+ * These are some of the many terms that are thrown about that don't always
+ * mean what people think they mean (Inconceivable!).  In the interest of
+ * creating a common ground for discussion, terms and their definitions
+ * will be established.
+ *
+ * Memory devices:	The individual DRAM chips on a memory stick.  These
+ *			devices commonly output 4 and 8 bits each (x4, x8).
+ *			Grouping several of these in parallel provides the
+ *			number of bits that the memory controller expects:
+ *			typically 72 bits, in order to provide 64 bits +
+ *			8 bits of ECC data.
+ *
+ * Memory Stick:	A printed circuit board that aggregates multiple
+ *			memory devices in parallel.  In general, this is the
+ *			Field Replaceable Unit (FRU) which gets replaced, in
+ *			the case of excessive errors. Most often it is also
+ *			called DIMM (Dual Inline Memory Module).
+ *
+ * Memory Socket:	A physical connector on the motherboard that accepts
+ *			a single memory stick. Also called as "slot" on several
+ *			datasheets.
+ *
+ * Channel:		A memory controller channel, responsible to communicate
+ *			with a group of DIMMs. Each channel has its own
+ *			independent control (command) and data bus, and can
+ *			be used independently or grouped with other channels.
+ *
+ * Branch:		It is typically the highest hierarchy on a
+ *			Fully-Buffered DIMM memory controller.
+ *			Typically, it contains two channels.
+ *			Two channels at the same branch can be used in single
+ *			mode or in lockstep mode.
+ *			When lockstep is enabled, the cacheline is doubled,
+ *			but it generally brings some performance penalty.
+ *			Also, it is generally not possible to point to just one
+ *			memory stick when an error occurs, as the error
+ *			correction code is calculated using two DIMMs instead
+ *			of one. Due to that, it is capable of correcting more
+ *			errors than on single mode.
+ *
+ * Single-channel:	The data accessed by the memory controller is contained
+ *			into one dimm only. E. g. if the data is 64 bits-wide,
+ *			the data flows to the CPU using one 64 bits parallel
+ *			access.
+ *			Typically used with SDR, DDR, DDR2 and DDR3 memories.
+ *			FB-DIMM and RAMBUS use a different concept for channel,
+ *			so this concept doesn't apply there.
+ *
+ * Double-channel:	The data size accessed by the memory controller is
+ *			interlaced into two dimms, accessed at the same time.
+ *			E. g. if the DIMM is 64 bits-wide (72 bits with ECC),
+ *			the data flows to the CPU using a 128 bits parallel
+ *			access.
+ *
+ * Chip-select row:	This is the name of the DRAM signal used to select the
+ *			DRAM ranks to be accessed. Common chip-select rows for
+ *			single channel are 64 bits, for dual channel 128 bits.
+ *			It may not be visible by the memory controller, as some
+ *			DIMM types have a memory buffer that can hide direct
+ *			access to it from the Memory Controller.
+ *
+ * Single-Ranked stick:	A Single-ranked stick has 1 chip-select row of memory.
+ *			Motherboards commonly drive two chip-select pins to
+ *			a memory stick. A single-ranked stick, will occupy
+ *			only one of those rows. The other will be unused.
+ *
+ * Double-Ranked stick:	A double-ranked stick has two chip-select rows which
+ *			access different sets of memory devices.  The two
+ *			rows cannot be accessed concurrently.
+ *
+ * Double-sided stick:	DEPRECATED TERM, see Double-Ranked stick.
+ *			A double-sided stick has two chip-select rows which
+ *			access different sets of memory devices. The two
+ *			rows cannot be accessed concurrently. "Double-sided"
+ *			is irrespective of the memory devices being mounted
+ *			on both sides of the memory stick.
+ *
+ * Socket set:		All of the memory sticks that are required for
+ *			a single memory access or all of the memory sticks
+ *			spanned by a chip-select row.  A single socket set
+ *			has two chip-select rows and if double-sided sticks
+ *			are used these will occupy those chip-select rows.
+ *
+ * Bank:		This term is avoided because it is unclear when
+ *			needing to distinguish between chip-select rows and
+ *			socket sets.
+ *
+ * Controller pages:
+ *
+ * Physical pages:
+ *
+ * Virtual pages:
+ *
+ *
+ * STRUCTURE ORGANIZATION AND CHOICES
+ *
+ *
+ *
+ * PS - I enjoyed writing all that about as much as you enjoyed reading it.
+ */
+
+/**
+ * struct rank_info - contains the information for one DIMM rank
+ *
+ * @chan_idx:	channel number where the rank is (typically, 0 or 1)
+ * @ce_count:	number of correctable errors for this rank
+ * @label:	DIMM label. Different ranks for the same DIMM should be
+ *		filled, on userspace, with the same label.
+ *		FIXME: The core currently won't enforce it.
+ * @csrow:	A pointer to the chip select row structure (the parent
+ *		structure). The location of the rank is given by
+ *		the (csrow->csrow_idx, chan_idx) vector.
+ */
+struct rank_info {
+	int chan_idx;
+	u32 ce_count;
+	char label[EDAC_MC_LABEL_LEN + 1];
+	struct csrow_info *csrow;	/* the parent */
+};
+
+struct csrow_info {
+	unsigned long first_page;	/* first page number in dimm */
+	unsigned long last_page;	/* last page number in dimm */
+	unsigned long page_mask;	/* used for interleaving -
+					 * 0UL for non intlv
+					 */
+	u32 nr_pages;		/* number of pages in csrow */
+	u32 grain;		/* granularity of reported error in bytes */
+	int csrow_idx;		/* the chip-select row */
+	enum dev_type dtype;	/* memory device type */
+	u32 ue_count;		/* Uncorrectable Errors for this csrow */
+	u32 ce_count;		/* Correctable Errors for this csrow */
+	enum mem_type mtype;	/* memory csrow type */
+	enum edac_type edac_mode;	/* EDAC mode for this csrow */
+	struct mem_ctl_info *mci;	/* the parent */
+
+	struct kobject kobj;	/* sysfs kobject for this csrow */
+
+	/* channel information for this csrow */
+	u32 nr_channels;
+	struct rank_info *channels;
+};
+
+struct mcidev_sysfs_group {
+	const char *name;				/* group name */
+	const struct mcidev_sysfs_attribute *mcidev_attr; /* group attributes */
+};
+
+struct mcidev_sysfs_group_kobj {
+	struct list_head list;		/* list for all instances within a mc */
+
+	struct kobject kobj;		/* kobj for the group */
+
+	const struct mcidev_sysfs_group *grp;	/* group description table */
+	struct mem_ctl_info *mci;	/* the parent */
+};
+
+/* mcidev_sysfs_attribute structure
+ *	used for driver sysfs attributes and in mem_ctl_info
+ * 	sysfs top level entries
+ */
+struct mcidev_sysfs_attribute {
+	/* It should use either attr or grp */
+	struct attribute attr;
+	const struct mcidev_sysfs_group *grp;	/* Points to a group of attributes */
+
+	/* Ops for show/store values at the attribute - not used on group */
+        ssize_t (*show)(struct mem_ctl_info *,char *);
+        ssize_t (*store)(struct mem_ctl_info *, const char *,size_t);
+};
+
+/* MEMORY controller information structure
+ */
+struct mem_ctl_info {
+	struct list_head link;	/* for global list of mem_ctl_info structs */
+
+	struct module *owner;	/* Module owner of this control struct */
+
+	unsigned long mtype_cap;	/* memory types supported by mc */
+	unsigned long edac_ctl_cap;	/* Mem controller EDAC capabilities */
+	unsigned long edac_cap;	/* configuration capabilities - this is
+				 * closely related to edac_ctl_cap.  The
+				 * difference is that the controller may be
+				 * capable of s4ecd4ed which would be listed
+				 * in edac_ctl_cap, but if channels aren't
+				 * capable of s4ecd4ed then the edac_cap would
+				 * not have that capability.
+				 */
+	unsigned long scrub_cap;	/* chipset scrub capabilities */
+	enum scrub_type scrub_mode;	/* current scrub mode */
+
+	/* Translates sdram memory scrub rate given in bytes/sec to the
+	   internal representation and configures whatever else needs
+	   to be configured.
+	 */
+	int (*set_sdram_scrub_rate) (struct mem_ctl_info * mci, u32 bw);
+
+	/* Get the current sdram memory scrub rate from the internal
+	   representation and converts it to the closest matching
+	   bandwidth in bytes/sec.
+	 */
+	int (*get_sdram_scrub_rate) (struct mem_ctl_info * mci);
+
+
+	/* pointer to edac checking routine */
+	void (*edac_check) (struct mem_ctl_info * mci);
+
+	/*
+	 * Remaps memory pages: controller pages to physical pages.
+	 * For most MC's, this will be NULL.
+	 */
+	/* FIXME - why not send the phys page to begin with? */
+	unsigned long (*ctl_page_to_phys) (struct mem_ctl_info * mci,
+					   unsigned long page);
+	int mc_idx;
+	int nr_csrows;
+	struct csrow_info *csrows;
+	/*
+	 * FIXME - what about controllers on other busses? - IDs must be
+	 * unique.  dev pointer should be sufficiently unique, but
+	 * BUS:SLOT.FUNC numbers may not be unique.
+	 */
+	struct device *dev;
+	const char *mod_name;
+	const char *mod_ver;
+	const char *ctl_name;
+	const char *dev_name;
+	char proc_name[MC_PROC_NAME_MAX_LEN + 1];
+	void *pvt_info;
+	u32 ue_noinfo_count;	/* Uncorrectable Errors w/o info */
+	u32 ce_noinfo_count;	/* Correctable Errors w/o info */
+	u32 ue_count;		/* Total Uncorrectable Errors for this MC */
+	u32 ce_count;		/* Total Correctable Errors for this MC */
+	unsigned long start_time;	/* mci load start time (in jiffies) */
+
+	struct completion complete;
+
+	/* edac sysfs device control */
+	struct kobject edac_mci_kobj;
+
+	/* list for all grp instances within a mc */
+	struct list_head grp_kobj_list;
+
+	/* Additional top controller level attributes, but specified
+	 * by the low level driver.
+	 *
+	 * Set by the low level driver to provide attributes at the
+	 * controller level, same level as 'ue_count' and 'ce_count' above.
+	 * An array of structures, NULL terminated
+	 *
+	 * If attributes are desired, then set to array of attributes
+	 * If no attributes are desired, leave NULL
+	 */
+	const struct mcidev_sysfs_attribute *mc_driver_sysfs_attributes;
+
+	/* work struct for this MC */
+	struct delayed_work work;
+
+	/* the internal state of this controller instance */
+	int op_state;
+};
+
+#endif
diff --git a/include/linux/edd.h b/include/linux/edd.h
new file mode 100644
index 00000000..4cbd0fe9
--- /dev/null
+++ b/include/linux/edd.h
@@ -0,0 +1,194 @@
+/*
+ * linux/include/linux/edd.h
+ *  Copyright (C) 2002, 2003, 2004 Dell Inc.
+ *  by Matt Domsch <Matt_Domsch@dell.com>
+ *
+ * structures and definitions for the int 13h, ax={41,48}h
+ * BIOS Enhanced Disk Drive Services
+ * This is based on the T13 group document D1572 Revision 0 (August 14 2002)
+ * available at http://www.t13.org/docs2002/d1572r0.pdf.  It is
+ * very similar to D1484 Revision 3 http://www.t13.org/docs2002/d1484r3.pdf
+ *
+ * In a nutshell, arch/{i386,x86_64}/boot/setup.S populates a scratch
+ * table in the boot_params that contains a list of BIOS-enumerated
+ * boot devices.
+ * In arch/{i386,x86_64}/kernel/setup.c, this information is
+ * transferred into the edd structure, and in drivers/firmware/edd.c, that
+ * information is used to identify BIOS boot disk.  The code in setup.S
+ * is very sensitive to the size of these structures.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef _LINUX_EDD_H
+#define _LINUX_EDD_H
+
+#include <linux/types.h>
+
+#define EDDNR 0x1e9		/* addr of number of edd_info structs at EDDBUF
+				   in boot_params - treat this as 1 byte  */
+#define EDDBUF	0xd00		/* addr of edd_info structs in boot_params */
+#define EDDMAXNR 6		/* number of edd_info structs starting at EDDBUF  */
+#define EDDEXTSIZE 8		/* change these if you muck with the structures */
+#define EDDPARMSIZE 74
+#define CHECKEXTENSIONSPRESENT 0x41
+#define GETDEVICEPARAMETERS 0x48
+#define LEGACYGETDEVICEPARAMETERS 0x08
+#define EDDMAGIC1 0x55AA
+#define EDDMAGIC2 0xAA55
+
+
+#define READ_SECTORS 0x02         /* int13 AH=0x02 is READ_SECTORS command */
+#define EDD_MBR_SIG_OFFSET 0x1B8  /* offset of signature in the MBR */
+#define EDD_MBR_SIG_BUF    0x290  /* addr in boot params */
+#define EDD_MBR_SIG_MAX 16        /* max number of signatures to store */
+#define EDD_MBR_SIG_NR_BUF 0x1ea  /* addr of number of MBR signtaures at EDD_MBR_SIG_BUF
+				     in boot_params - treat this as 1 byte  */
+
+#ifndef __ASSEMBLY__
+
+#define EDD_EXT_FIXED_DISK_ACCESS           (1 << 0)
+#define EDD_EXT_DEVICE_LOCKING_AND_EJECTING (1 << 1)
+#define EDD_EXT_ENHANCED_DISK_DRIVE_SUPPORT (1 << 2)
+#define EDD_EXT_64BIT_EXTENSIONS            (1 << 3)
+
+#define EDD_INFO_DMA_BOUNDARY_ERROR_TRANSPARENT (1 << 0)
+#define EDD_INFO_GEOMETRY_VALID                (1 << 1)
+#define EDD_INFO_REMOVABLE                     (1 << 2)
+#define EDD_INFO_WRITE_VERIFY                  (1 << 3)
+#define EDD_INFO_MEDIA_CHANGE_NOTIFICATION     (1 << 4)
+#define EDD_INFO_LOCKABLE                      (1 << 5)
+#define EDD_INFO_NO_MEDIA_PRESENT              (1 << 6)
+#define EDD_INFO_USE_INT13_FN50                (1 << 7)
+
+struct edd_device_params {
+	__u16 length;
+	__u16 info_flags;
+	__u32 num_default_cylinders;
+	__u32 num_default_heads;
+	__u32 sectors_per_track;
+	__u64 number_of_sectors;
+	__u16 bytes_per_sector;
+	__u32 dpte_ptr;		/* 0xFFFFFFFF for our purposes */
+	__u16 key;		/* = 0xBEDD */
+	__u8 device_path_info_length;	/* = 44 */
+	__u8 reserved2;
+	__u16 reserved3;
+	__u8 host_bus_type[4];
+	__u8 interface_type[8];
+	union {
+		struct {
+			__u16 base_address;
+			__u16 reserved1;
+			__u32 reserved2;
+		} __attribute__ ((packed)) isa;
+		struct {
+			__u8 bus;
+			__u8 slot;
+			__u8 function;
+			__u8 channel;
+			__u32 reserved;
+		} __attribute__ ((packed)) pci;
+		/* pcix is same as pci */
+		struct {
+			__u64 reserved;
+		} __attribute__ ((packed)) ibnd;
+		struct {
+			__u64 reserved;
+		} __attribute__ ((packed)) xprs;
+		struct {
+			__u64 reserved;
+		} __attribute__ ((packed)) htpt;
+		struct {
+			__u64 reserved;
+		} __attribute__ ((packed)) unknown;
+	} interface_path;
+	union {
+		struct {
+			__u8 device;
+			__u8 reserved1;
+			__u16 reserved2;
+			__u32 reserved3;
+			__u64 reserved4;
+		} __attribute__ ((packed)) ata;
+		struct {
+			__u8 device;
+			__u8 lun;
+			__u8 reserved1;
+			__u8 reserved2;
+			__u32 reserved3;
+			__u64 reserved4;
+		} __attribute__ ((packed)) atapi;
+		struct {
+			__u16 id;
+			__u64 lun;
+			__u16 reserved1;
+			__u32 reserved2;
+		} __attribute__ ((packed)) scsi;
+		struct {
+			__u64 serial_number;
+			__u64 reserved;
+		} __attribute__ ((packed)) usb;
+		struct {
+			__u64 eui;
+			__u64 reserved;
+		} __attribute__ ((packed)) i1394;
+		struct {
+			__u64 wwid;
+			__u64 lun;
+		} __attribute__ ((packed)) fibre;
+		struct {
+			__u64 identity_tag;
+			__u64 reserved;
+		} __attribute__ ((packed)) i2o;
+		struct {
+			__u32 array_number;
+			__u32 reserved1;
+			__u64 reserved2;
+		} __attribute__ ((packed)) raid;
+		struct {
+			__u8 device;
+			__u8 reserved1;
+			__u16 reserved2;
+			__u32 reserved3;
+			__u64 reserved4;
+		} __attribute__ ((packed)) sata;
+		struct {
+			__u64 reserved1;
+			__u64 reserved2;
+		} __attribute__ ((packed)) unknown;
+	} device_path;
+	__u8 reserved4;
+	__u8 checksum;
+} __attribute__ ((packed));
+
+struct edd_info {
+	__u8 device;
+	__u8 version;
+	__u16 interface_support;
+	__u16 legacy_max_cylinder;
+	__u8 legacy_max_head;
+	__u8 legacy_sectors_per_track;
+	struct edd_device_params params;
+} __attribute__ ((packed));
+
+struct edd {
+	unsigned int mbr_signature[EDD_MBR_SIG_MAX];
+	struct edd_info edd_info[EDDMAXNR];
+	unsigned char mbr_signature_nr;
+	unsigned char edd_info_nr;
+};
+
+#ifdef __KERNEL__
+extern struct edd edd;
+#endif /* __KERNEL__ */
+#endif				/*!__ASSEMBLY__ */
+
+#endif				/* _LINUX_EDD_H */
diff --git a/include/linux/eeprom_93cx6.h b/include/linux/eeprom_93cx6.h
new file mode 100644
index 00000000..e50f98b0
--- /dev/null
+++ b/include/linux/eeprom_93cx6.h
@@ -0,0 +1,82 @@
+/*
+	Copyright (C) 2004 - 2006 rt2x00 SourceForge Project
+	<http://rt2x00.serialmonkey.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+	Module: eeprom_93cx6
+	Abstract: EEPROM reader datastructures for 93cx6 chipsets.
+	Supported chipsets: 93c46, 93c56 and 93c66.
+ */
+
+/*
+ * EEPROM operation defines.
+ */
+#define PCI_EEPROM_WIDTH_93C46	6
+#define PCI_EEPROM_WIDTH_93C56	8
+#define PCI_EEPROM_WIDTH_93C66	8
+#define PCI_EEPROM_WIDTH_93C86	8
+#define PCI_EEPROM_WIDTH_OPCODE	3
+#define PCI_EEPROM_WRITE_OPCODE	0x05
+#define PCI_EEPROM_ERASE_OPCODE 0x07
+#define PCI_EEPROM_READ_OPCODE	0x06
+#define PCI_EEPROM_EWDS_OPCODE	0x10
+#define PCI_EEPROM_EWEN_OPCODE	0x13
+
+/**
+ * struct eeprom_93cx6 - control structure for setting the commands
+ * for reading the eeprom data.
+ * @data: private pointer for the driver.
+ * @register_read(struct eeprom_93cx6 *eeprom): handler to
+ * read the eeprom register, this function should set all reg_* fields.
+ * @register_write(struct eeprom_93cx6 *eeprom): handler to
+ * write to the eeprom register by using all reg_* fields.
+ * @width: eeprom width, should be one of the PCI_EEPROM_WIDTH_* defines
+ * @drive_data: Set if we're driving the data line.
+ * @reg_data_in: register field to indicate data input
+ * @reg_data_out: register field to indicate data output
+ * @reg_data_clock: register field to set the data clock
+ * @reg_chip_select: register field to set the chip select
+ *
+ * This structure is used for the communication between the driver
+ * and the eeprom_93cx6 handlers for reading the eeprom.
+ */
+struct eeprom_93cx6 {
+	void *data;
+
+	void (*register_read)(struct eeprom_93cx6 *eeprom);
+	void (*register_write)(struct eeprom_93cx6 *eeprom);
+
+	int width;
+
+	char drive_data;
+	char reg_data_in;
+	char reg_data_out;
+	char reg_data_clock;
+	char reg_chip_select;
+};
+
+extern void eeprom_93cx6_read(struct eeprom_93cx6 *eeprom,
+	const u8 word, u16 *data);
+extern void eeprom_93cx6_multiread(struct eeprom_93cx6 *eeprom,
+	const u8 word, __le16 *data, const u16 words);
+
+extern void eeprom_93cx6_wren(struct eeprom_93cx6 *eeprom, bool enable);
+
+extern void eeprom_93cx6_write(struct eeprom_93cx6 *eeprom,
+			       u8 addr, u16 data);
diff --git a/include/linux/eeprom_93xx46.h b/include/linux/eeprom_93xx46.h
new file mode 100644
index 00000000..06791811
--- /dev/null
+++ b/include/linux/eeprom_93xx46.h
@@ -0,0 +1,18 @@
+/*
+ * Module: eeprom_93xx46
+ * platform description for 93xx46 EEPROMs.
+ */
+
+struct eeprom_93xx46_platform_data {
+	unsigned char	flags;
+#define EE_ADDR8	0x01		/*  8 bit addr. cfg */
+#define EE_ADDR16	0x02		/* 16 bit addr. cfg */
+#define EE_READONLY	0x08		/* forbid writing */
+
+	/*
+	 * optional hooks to control additional logic
+	 * before and after spi transfer.
+	 */
+	void (*prepare)(void *);
+	void (*finish)(void *);
+};
diff --git a/include/linux/efi.h b/include/linux/efi.h
new file mode 100644
index 00000000..ec45ccd8
--- /dev/null
+++ b/include/linux/efi.h
@@ -0,0 +1,665 @@
+#ifndef _LINUX_EFI_H
+#define _LINUX_EFI_H
+
+/*
+ * Extensible Firmware Interface
+ * Based on 'Extensible Firmware Interface Specification' version 0.9, April 30, 1999
+ *
+ * Copyright (C) 1999 VA Linux Systems
+ * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ * Copyright (C) 1999, 2002-2003 Hewlett-Packard Co.
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *	Stephane Eranian <eranian@hpl.hp.com>
+ */
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/time.h>
+#include <linux/types.h>
+#include <linux/proc_fs.h>
+#include <linux/rtc.h>
+#include <linux/ioport.h>
+#include <linux/pfn.h>
+#include <linux/pstore.h>
+
+#include <asm/page.h>
+
+#define EFI_SUCCESS		0
+#define EFI_LOAD_ERROR          ( 1 | (1UL << (BITS_PER_LONG-1)))
+#define EFI_INVALID_PARAMETER	( 2 | (1UL << (BITS_PER_LONG-1)))
+#define EFI_UNSUPPORTED		( 3 | (1UL << (BITS_PER_LONG-1)))
+#define EFI_BAD_BUFFER_SIZE     ( 4 | (1UL << (BITS_PER_LONG-1)))
+#define EFI_BUFFER_TOO_SMALL	( 5 | (1UL << (BITS_PER_LONG-1)))
+#define EFI_NOT_FOUND		(14 | (1UL << (BITS_PER_LONG-1)))
+
+typedef unsigned long efi_status_t;
+typedef u8 efi_bool_t;
+typedef u16 efi_char16_t;		/* UNICODE character */
+
+
+typedef struct {
+	u8 b[16];
+} efi_guid_t;
+
+#define EFI_GUID(a,b,c,d0,d1,d2,d3,d4,d5,d6,d7) \
+((efi_guid_t) \
+{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \
+  (b) & 0xff, ((b) >> 8) & 0xff, \
+  (c) & 0xff, ((c) >> 8) & 0xff, \
+  (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }})
+
+/*
+ * Generic EFI table header
+ */
+typedef	struct {
+	u64 signature;
+	u32 revision;
+	u32 headersize;
+	u32 crc32;
+	u32 reserved;
+} efi_table_hdr_t;
+
+/*
+ * Memory map descriptor:
+ */
+
+/* Memory types: */
+#define EFI_RESERVED_TYPE		 0
+#define EFI_LOADER_CODE			 1
+#define EFI_LOADER_DATA			 2
+#define EFI_BOOT_SERVICES_CODE		 3
+#define EFI_BOOT_SERVICES_DATA		 4
+#define EFI_RUNTIME_SERVICES_CODE	 5
+#define EFI_RUNTIME_SERVICES_DATA	 6
+#define EFI_CONVENTIONAL_MEMORY		 7
+#define EFI_UNUSABLE_MEMORY		 8
+#define EFI_ACPI_RECLAIM_MEMORY		 9
+#define EFI_ACPI_MEMORY_NVS		10
+#define EFI_MEMORY_MAPPED_IO		11
+#define EFI_MEMORY_MAPPED_IO_PORT_SPACE	12
+#define EFI_PAL_CODE			13
+#define EFI_MAX_MEMORY_TYPE		14
+
+/* Attribute values: */
+#define EFI_MEMORY_UC		((u64)0x0000000000000001ULL)	/* uncached */
+#define EFI_MEMORY_WC		((u64)0x0000000000000002ULL)	/* write-coalescing */
+#define EFI_MEMORY_WT		((u64)0x0000000000000004ULL)	/* write-through */
+#define EFI_MEMORY_WB		((u64)0x0000000000000008ULL)	/* write-back */
+#define EFI_MEMORY_WP		((u64)0x0000000000001000ULL)	/* write-protect */
+#define EFI_MEMORY_RP		((u64)0x0000000000002000ULL)	/* read-protect */
+#define EFI_MEMORY_XP		((u64)0x0000000000004000ULL)	/* execute-protect */
+#define EFI_MEMORY_RUNTIME	((u64)0x8000000000000000ULL)	/* range requires runtime mapping */
+#define EFI_MEMORY_DESCRIPTOR_VERSION	1
+
+#define EFI_PAGE_SHIFT		12
+
+typedef struct {
+	u32 type;
+	u32 pad;
+	u64 phys_addr;
+	u64 virt_addr;
+	u64 num_pages;
+	u64 attribute;
+} efi_memory_desc_t;
+
+typedef struct {
+	efi_guid_t guid;
+	u32 headersize;
+	u32 flags;
+	u32 imagesize;
+} efi_capsule_header_t;
+
+/*
+ * Allocation types for calls to boottime->allocate_pages.
+ */
+#define EFI_ALLOCATE_ANY_PAGES		0
+#define EFI_ALLOCATE_MAX_ADDRESS	1
+#define EFI_ALLOCATE_ADDRESS		2
+#define EFI_MAX_ALLOCATE_TYPE		3
+
+typedef int (*efi_freemem_callback_t) (u64 start, u64 end, void *arg);
+
+/*
+ * Types and defines for Time Services
+ */
+#define EFI_TIME_ADJUST_DAYLIGHT 0x1
+#define EFI_TIME_IN_DAYLIGHT     0x2
+#define EFI_UNSPECIFIED_TIMEZONE 0x07ff
+
+typedef struct {
+	u16 year;
+	u8 month;
+	u8 day;
+	u8 hour;
+	u8 minute;
+	u8 second;
+	u8 pad1;
+	u32 nanosecond;
+	s16 timezone;
+	u8 daylight;
+	u8 pad2;
+} efi_time_t;
+
+typedef struct {
+	u32 resolution;
+	u32 accuracy;
+	u8 sets_to_zero;
+} efi_time_cap_t;
+
+/*
+ * EFI Boot Services table
+ */
+typedef struct {
+	efi_table_hdr_t hdr;
+	void *raise_tpl;
+	void *restore_tpl;
+	void *allocate_pages;
+	void *free_pages;
+	void *get_memory_map;
+	void *allocate_pool;
+	void *free_pool;
+	void *create_event;
+	void *set_timer;
+	void *wait_for_event;
+	void *signal_event;
+	void *close_event;
+	void *check_event;
+	void *install_protocol_interface;
+	void *reinstall_protocol_interface;
+	void *uninstall_protocol_interface;
+	void *handle_protocol;
+	void *__reserved;
+	void *register_protocol_notify;
+	void *locate_handle;
+	void *locate_device_path;
+	void *install_configuration_table;
+	void *load_image;
+	void *start_image;
+	void *exit;
+	void *unload_image;
+	void *exit_boot_services;
+	void *get_next_monotonic_count;
+	void *stall;
+	void *set_watchdog_timer;
+	void *connect_controller;
+	void *disconnect_controller;
+	void *open_protocol;
+	void *close_protocol;
+	void *open_protocol_information;
+	void *protocols_per_handle;
+	void *locate_handle_buffer;
+	void *locate_protocol;
+	void *install_multiple_protocol_interfaces;
+	void *uninstall_multiple_protocol_interfaces;
+	void *calculate_crc32;
+	void *copy_mem;
+	void *set_mem;
+	void *create_event_ex;
+} efi_boot_services_t;
+
+/*
+ * Types and defines for EFI ResetSystem
+ */
+#define EFI_RESET_COLD 0
+#define EFI_RESET_WARM 1
+#define EFI_RESET_SHUTDOWN 2
+
+/*
+ * EFI Runtime Services table
+ */
+#define EFI_RUNTIME_SERVICES_SIGNATURE ((u64)0x5652453544e5552ULL)
+#define EFI_RUNTIME_SERVICES_REVISION  0x00010000
+
+typedef struct {
+	efi_table_hdr_t hdr;
+	unsigned long get_time;
+	unsigned long set_time;
+	unsigned long get_wakeup_time;
+	unsigned long set_wakeup_time;
+	unsigned long set_virtual_address_map;
+	unsigned long convert_pointer;
+	unsigned long get_variable;
+	unsigned long get_next_variable;
+	unsigned long set_variable;
+	unsigned long get_next_high_mono_count;
+	unsigned long reset_system;
+	unsigned long update_capsule;
+	unsigned long query_capsule_caps;
+	unsigned long query_variable_info;
+} efi_runtime_services_t;
+
+typedef efi_status_t efi_get_time_t (efi_time_t *tm, efi_time_cap_t *tc);
+typedef efi_status_t efi_set_time_t (efi_time_t *tm);
+typedef efi_status_t efi_get_wakeup_time_t (efi_bool_t *enabled, efi_bool_t *pending,
+					    efi_time_t *tm);
+typedef efi_status_t efi_set_wakeup_time_t (efi_bool_t enabled, efi_time_t *tm);
+typedef efi_status_t efi_get_variable_t (efi_char16_t *name, efi_guid_t *vendor, u32 *attr,
+					 unsigned long *data_size, void *data);
+typedef efi_status_t efi_get_next_variable_t (unsigned long *name_size, efi_char16_t *name,
+					      efi_guid_t *vendor);
+typedef efi_status_t efi_set_variable_t (efi_char16_t *name, efi_guid_t *vendor, 
+					 u32 attr, unsigned long data_size,
+					 void *data);
+typedef efi_status_t efi_get_next_high_mono_count_t (u32 *count);
+typedef void efi_reset_system_t (int reset_type, efi_status_t status,
+				 unsigned long data_size, efi_char16_t *data);
+typedef efi_status_t efi_set_virtual_address_map_t (unsigned long memory_map_size,
+						unsigned long descriptor_size,
+						u32 descriptor_version,
+						efi_memory_desc_t *virtual_map);
+typedef efi_status_t efi_query_variable_info_t(u32 attr,
+					       u64 *storage_space,
+					       u64 *remaining_space,
+					       u64 *max_variable_size);
+typedef efi_status_t efi_update_capsule_t(efi_capsule_header_t **capsules,
+					  unsigned long count,
+					  unsigned long sg_list);
+typedef efi_status_t efi_query_capsule_caps_t(efi_capsule_header_t **capsules,
+					      unsigned long count,
+					      u64 *max_size,
+					      int *reset_type);
+
+/*
+ *  EFI Configuration Table and GUID definitions
+ */
+#define NULL_GUID \
+    EFI_GUID(  0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 )
+
+#define MPS_TABLE_GUID    \
+    EFI_GUID(  0xeb9d2d2f, 0x2d88, 0x11d3, 0x9a, 0x16, 0x0, 0x90, 0x27, 0x3f, 0xc1, 0x4d )
+
+#define ACPI_TABLE_GUID    \
+    EFI_GUID(  0xeb9d2d30, 0x2d88, 0x11d3, 0x9a, 0x16, 0x0, 0x90, 0x27, 0x3f, 0xc1, 0x4d )
+
+#define ACPI_20_TABLE_GUID    \
+    EFI_GUID(  0x8868e871, 0xe4f1, 0x11d3, 0xbc, 0x22, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81 )
+
+#define SMBIOS_TABLE_GUID    \
+    EFI_GUID(  0xeb9d2d31, 0x2d88, 0x11d3, 0x9a, 0x16, 0x0, 0x90, 0x27, 0x3f, 0xc1, 0x4d )
+
+#define SAL_SYSTEM_TABLE_GUID    \
+    EFI_GUID(  0xeb9d2d32, 0x2d88, 0x11d3, 0x9a, 0x16, 0x0, 0x90, 0x27, 0x3f, 0xc1, 0x4d )
+
+#define HCDP_TABLE_GUID	\
+    EFI_GUID(  0xf951938d, 0x620b, 0x42ef, 0x82, 0x79, 0xa8, 0x4b, 0x79, 0x61, 0x78, 0x98 )
+
+#define UGA_IO_PROTOCOL_GUID \
+    EFI_GUID(  0x61a4d49e, 0x6f68, 0x4f1b, 0xb9, 0x22, 0xa8, 0x6e, 0xed, 0xb, 0x7, 0xa2 )
+
+#define EFI_GLOBAL_VARIABLE_GUID \
+    EFI_GUID(  0x8be4df61, 0x93ca, 0x11d2, 0xaa, 0x0d, 0x00, 0xe0, 0x98, 0x03, 0x2b, 0x8c )
+
+#define UV_SYSTEM_TABLE_GUID \
+    EFI_GUID(  0x3b13a7d4, 0x633e, 0x11dd, 0x93, 0xec, 0xda, 0x25, 0x56, 0xd8, 0x95, 0x93 )
+
+#define LINUX_EFI_CRASH_GUID \
+    EFI_GUID(  0xcfc8fc79, 0xbe2e, 0x4ddc, 0x97, 0xf0, 0x9f, 0x98, 0xbf, 0xe2, 0x98, 0xa0 )
+
+#define LOADED_IMAGE_PROTOCOL_GUID \
+    EFI_GUID(  0x5b1b31a1, 0x9562, 0x11d2, 0x8e, 0x3f, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b )
+
+#define EFI_GRAPHICS_OUTPUT_PROTOCOL_GUID \
+    EFI_GUID(  0x9042a9de, 0x23dc, 0x4a38, 0x96, 0xfb, 0x7a, 0xde, 0xd0, 0x80, 0x51, 0x6a )
+
+#define EFI_UGA_PROTOCOL_GUID \
+    EFI_GUID(  0x982c298b, 0xf4fa, 0x41cb, 0xb8, 0x38, 0x77, 0xaa, 0x68, 0x8f, 0xb8, 0x39 )
+
+#define EFI_PCI_IO_PROTOCOL_GUID \
+    EFI_GUID(  0x4cf5b200, 0x68b8, 0x4ca5, 0x9e, 0xec, 0xb2, 0x3e, 0x3f, 0x50, 0x2, 0x9a )
+
+#define EFI_FILE_INFO_ID \
+    EFI_GUID(  0x9576e92, 0x6d3f, 0x11d2, 0x8e, 0x39, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b )
+
+#define EFI_FILE_SYSTEM_GUID \
+    EFI_GUID(  0x964e5b22, 0x6459, 0x11d2, 0x8e, 0x39, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b )
+
+typedef struct {
+	efi_guid_t guid;
+	u64 table;
+} efi_config_table_64_t;
+
+typedef struct {
+	efi_guid_t guid;
+	u32 table;
+} efi_config_table_32_t;
+
+typedef struct {
+	efi_guid_t guid;
+	unsigned long table;
+} efi_config_table_t;
+
+#define EFI_SYSTEM_TABLE_SIGNATURE ((u64)0x5453595320494249ULL)
+
+#define EFI_2_30_SYSTEM_TABLE_REVISION  ((2 << 16) | (30))
+#define EFI_2_20_SYSTEM_TABLE_REVISION  ((2 << 16) | (20))
+#define EFI_2_10_SYSTEM_TABLE_REVISION  ((2 << 16) | (10))
+#define EFI_2_00_SYSTEM_TABLE_REVISION  ((2 << 16) | (00))
+#define EFI_1_10_SYSTEM_TABLE_REVISION  ((1 << 16) | (10))
+#define EFI_1_02_SYSTEM_TABLE_REVISION  ((1 << 16) | (02))
+
+typedef struct {
+	efi_table_hdr_t hdr;
+	u64 fw_vendor;	/* physical addr of CHAR16 vendor string */
+	u32 fw_revision;
+	u32 __pad1;
+	u64 con_in_handle;
+	u64 con_in;
+	u64 con_out_handle;
+	u64 con_out;
+	u64 stderr_handle;
+	u64 stderr;
+	u64 runtime;
+	u64 boottime;
+	u32 nr_tables;
+	u32 __pad2;
+	u64 tables;
+} efi_system_table_64_t;
+
+typedef struct {
+	efi_table_hdr_t hdr;
+	u32 fw_vendor;	/* physical addr of CHAR16 vendor string */
+	u32 fw_revision;
+	u32 con_in_handle;
+	u32 con_in;
+	u32 con_out_handle;
+	u32 con_out;
+	u32 stderr_handle;
+	u32 stderr;
+	u32 runtime;
+	u32 boottime;
+	u32 nr_tables;
+	u32 tables;
+} efi_system_table_32_t;
+
+typedef struct {
+	efi_table_hdr_t hdr;
+	unsigned long fw_vendor;	/* physical addr of CHAR16 vendor string */
+	u32 fw_revision;
+	unsigned long con_in_handle;
+	unsigned long con_in;
+	unsigned long con_out_handle;
+	unsigned long con_out;
+	unsigned long stderr_handle;
+	unsigned long stderr;
+	efi_runtime_services_t *runtime;
+	efi_boot_services_t *boottime;
+	unsigned long nr_tables;
+	unsigned long tables;
+} efi_system_table_t;
+
+struct efi_memory_map {
+	void *phys_map;
+	void *map;
+	void *map_end;
+	int nr_map;
+	unsigned long desc_version;
+	unsigned long desc_size;
+};
+
+typedef struct {
+	u32 revision;
+	void *parent_handle;
+	efi_system_table_t *system_table;
+	void *device_handle;
+	void *file_path;
+	void *reserved;
+	u32 load_options_size;
+	void *load_options;
+	void *image_base;
+	__aligned_u64 image_size;
+	unsigned int image_code_type;
+	unsigned int image_data_type;
+	unsigned long unload;
+} efi_loaded_image_t;
+
+typedef struct {
+	u64 revision;
+	void *open_volume;
+} efi_file_io_interface_t;
+
+typedef struct {
+	u64 size;
+	u64 file_size;
+	u64 phys_size;
+	efi_time_t create_time;
+	efi_time_t last_access_time;
+	efi_time_t modification_time;
+	__aligned_u64 attribute;
+	efi_char16_t filename[1];
+} efi_file_info_t;
+
+typedef struct {
+	u64 revision;
+	void *open;
+	void *close;
+	void *delete;
+	void *read;
+	void *write;
+	void *get_position;
+	void *set_position;
+	void *get_info;
+	void *set_info;
+	void *flush;
+} efi_file_handle_t;
+
+#define EFI_FILE_MODE_READ	0x0000000000000001
+#define EFI_FILE_MODE_WRITE	0x0000000000000002
+#define EFI_FILE_MODE_CREATE	0x8000000000000000
+
+#define EFI_INVALID_TABLE_ADDR		(~0UL)
+
+/*
+ * All runtime access to EFI goes through this structure:
+ */
+extern struct efi {
+	efi_system_table_t *systab;	/* EFI system table */
+	unsigned int runtime_version;	/* Runtime services version */
+	unsigned long mps;		/* MPS table */
+	unsigned long acpi;		/* ACPI table  (IA64 ext 0.71) */
+	unsigned long acpi20;		/* ACPI table  (ACPI 2.0) */
+	unsigned long smbios;		/* SM BIOS table */
+	unsigned long sal_systab;	/* SAL system table */
+	unsigned long boot_info;	/* boot info table */
+	unsigned long hcdp;		/* HCDP table */
+	unsigned long uga;		/* UGA table */
+	unsigned long uv_systab;	/* UV system table */
+	efi_get_time_t *get_time;
+	efi_set_time_t *set_time;
+	efi_get_wakeup_time_t *get_wakeup_time;
+	efi_set_wakeup_time_t *set_wakeup_time;
+	efi_get_variable_t *get_variable;
+	efi_get_next_variable_t *get_next_variable;
+	efi_set_variable_t *set_variable;
+	efi_query_variable_info_t *query_variable_info;
+	efi_update_capsule_t *update_capsule;
+	efi_query_capsule_caps_t *query_capsule_caps;
+	efi_get_next_high_mono_count_t *get_next_high_mono_count;
+	efi_reset_system_t *reset_system;
+	efi_set_virtual_address_map_t *set_virtual_address_map;
+} efi;
+
+static inline int
+efi_guidcmp (efi_guid_t left, efi_guid_t right)
+{
+	return memcmp(&left, &right, sizeof (efi_guid_t));
+}
+
+static inline char *
+efi_guid_unparse(efi_guid_t *guid, char *out)
+{
+	sprintf(out, "%pUl", guid->b);
+        return out;
+}
+
+extern void efi_init (void);
+extern void *efi_get_pal_addr (void);
+extern void efi_map_pal_code (void);
+extern void efi_memmap_walk (efi_freemem_callback_t callback, void *arg);
+extern void efi_gettimeofday (struct timespec *ts);
+extern void efi_enter_virtual_mode (void);	/* switch EFI to virtual mode, if possible */
+extern u64 efi_get_iobase (void);
+extern u32 efi_mem_type (unsigned long phys_addr);
+extern u64 efi_mem_attributes (unsigned long phys_addr);
+extern u64 efi_mem_attribute (unsigned long phys_addr, unsigned long size);
+extern int __init efi_uart_console_only (void);
+extern void efi_initialize_iomem_resources(struct resource *code_resource,
+		struct resource *data_resource, struct resource *bss_resource);
+extern unsigned long efi_get_time(void);
+extern int efi_set_rtc_mmss(unsigned long nowtime);
+extern void efi_reserve_boot_services(void);
+extern struct efi_memory_map memmap;
+
+/**
+ * efi_range_is_wc - check the WC bit on an address range
+ * @start: starting kvirt address
+ * @len: length of range
+ *
+ * Consult the EFI memory map and make sure it's ok to set this range WC.
+ * Returns true or false.
+ */
+static inline int efi_range_is_wc(unsigned long start, unsigned long len)
+{
+	unsigned long i;
+
+	for (i = 0; i < len; i += (1UL << EFI_PAGE_SHIFT)) {
+		unsigned long paddr = __pa(start + i);
+		if (!(efi_mem_attributes(paddr) & EFI_MEMORY_WC))
+			return 0;
+	}
+	/* The range checked out */
+	return 1;
+}
+
+#ifdef CONFIG_EFI_PCDP
+extern int __init efi_setup_pcdp_console(char *);
+#endif
+
+/*
+ * We play games with efi_enabled so that the compiler will, if possible, remove
+ * EFI-related code altogether.
+ */
+#ifdef CONFIG_EFI
+# ifdef CONFIG_X86
+   extern int efi_enabled;
+   extern bool efi_64bit;
+# else
+#  define efi_enabled 1
+# endif
+#else
+# define efi_enabled 0
+#endif
+
+/*
+ * Variable Attributes
+ */
+#define EFI_VARIABLE_NON_VOLATILE       0x0000000000000001
+#define EFI_VARIABLE_BOOTSERVICE_ACCESS 0x0000000000000002
+#define EFI_VARIABLE_RUNTIME_ACCESS     0x0000000000000004
+#define EFI_VARIABLE_HARDWARE_ERROR_RECORD 0x0000000000000008
+#define EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS 0x0000000000000010
+#define EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS 0x0000000000000020
+#define EFI_VARIABLE_APPEND_WRITE	0x0000000000000040
+
+#define EFI_VARIABLE_MASK 	(EFI_VARIABLE_NON_VOLATILE | \
+				EFI_VARIABLE_BOOTSERVICE_ACCESS | \
+				EFI_VARIABLE_RUNTIME_ACCESS | \
+				EFI_VARIABLE_HARDWARE_ERROR_RECORD | \
+				EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS | \
+				EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS | \
+				EFI_VARIABLE_APPEND_WRITE)
+/*
+ * The type of search to perform when calling boottime->locate_handle
+ */
+#define EFI_LOCATE_ALL_HANDLES			0
+#define EFI_LOCATE_BY_REGISTER_NOTIFY		1
+#define EFI_LOCATE_BY_PROTOCOL			2
+
+/*
+ * EFI Device Path information
+ */
+#define EFI_DEV_HW			0x01
+#define  EFI_DEV_PCI				 1
+#define  EFI_DEV_PCCARD				 2
+#define  EFI_DEV_MEM_MAPPED			 3
+#define  EFI_DEV_VENDOR				 4
+#define  EFI_DEV_CONTROLLER			 5
+#define EFI_DEV_ACPI			0x02
+#define   EFI_DEV_BASIC_ACPI			 1
+#define   EFI_DEV_EXPANDED_ACPI			 2
+#define EFI_DEV_MSG			0x03
+#define   EFI_DEV_MSG_ATAPI			 1
+#define   EFI_DEV_MSG_SCSI			 2
+#define   EFI_DEV_MSG_FC			 3
+#define   EFI_DEV_MSG_1394			 4
+#define   EFI_DEV_MSG_USB			 5
+#define   EFI_DEV_MSG_USB_CLASS			15
+#define   EFI_DEV_MSG_I20			 6
+#define   EFI_DEV_MSG_MAC			11
+#define   EFI_DEV_MSG_IPV4			12
+#define   EFI_DEV_MSG_IPV6			13
+#define   EFI_DEV_MSG_INFINIBAND		 9
+#define   EFI_DEV_MSG_UART			14
+#define   EFI_DEV_MSG_VENDOR			10
+#define EFI_DEV_MEDIA			0x04
+#define   EFI_DEV_MEDIA_HARD_DRIVE		 1
+#define   EFI_DEV_MEDIA_CDROM			 2
+#define   EFI_DEV_MEDIA_VENDOR			 3
+#define   EFI_DEV_MEDIA_FILE			 4
+#define   EFI_DEV_MEDIA_PROTOCOL		 5
+#define EFI_DEV_BIOS_BOOT		0x05
+#define EFI_DEV_END_PATH		0x7F
+#define EFI_DEV_END_PATH2		0xFF
+#define   EFI_DEV_END_INSTANCE			0x01
+#define   EFI_DEV_END_ENTIRE			0xFF
+
+struct efi_generic_dev_path {
+	u8 type;
+	u8 sub_type;
+	u16 length;
+} __attribute ((packed));
+
+static inline void memrange_efi_to_native(u64 *addr, u64 *npages)
+{
+	*npages = PFN_UP(*addr + (*npages<<EFI_PAGE_SHIFT)) - PFN_DOWN(*addr);
+	*addr &= PAGE_MASK;
+}
+
+#if defined(CONFIG_EFI_VARS) || defined(CONFIG_EFI_VARS_MODULE)
+/*
+ * EFI Variable support.
+ *
+ * Different firmware drivers can expose their EFI-like variables using
+ * the following.
+ */
+
+struct efivar_operations {
+	efi_get_variable_t *get_variable;
+	efi_get_next_variable_t *get_next_variable;
+	efi_set_variable_t *set_variable;
+};
+
+struct efivars {
+	/*
+	 * ->lock protects two things:
+	 * 1) ->list - adds, removals, reads, writes
+	 * 2) ops.[gs]et_variable() calls.
+	 * It must not be held when creating sysfs entries or calling kmalloc.
+	 * ops.get_next_variable() is only called from register_efivars(),
+	 * which is protected by the BKL, so that path is safe.
+	 */
+	spinlock_t lock;
+	struct list_head list;
+	struct kset *kset;
+	struct bin_attribute *new_var, *del_var;
+	const struct efivar_operations *ops;
+	struct efivar_entry *walk_entry;
+	struct pstore_info efi_pstore_info;
+};
+
+int register_efivars(struct efivars *efivars,
+		     const struct efivar_operations *ops,
+		     struct kobject *parent_kobj);
+void unregister_efivars(struct efivars *efivars);
+
+#endif /* CONFIG_EFI_VARS */
+
+#endif /* _LINUX_EFI_H */
diff --git a/include/linux/efs_fs_sb.h b/include/linux/efs_fs_sb.h
new file mode 100644
index 00000000..a01be90c
--- /dev/null
+++ b/include/linux/efs_fs_sb.h
@@ -0,0 +1,62 @@
+/*
+ * efs_fs_sb.h
+ *
+ * Copyright (c) 1999 Al Smith
+ *
+ * Portions derived from IRIX header files (c) 1988 Silicon Graphics
+ */
+
+#ifndef __EFS_FS_SB_H__
+#define __EFS_FS_SB_H__
+
+#include <linux/types.h>
+#include <linux/magic.h>
+
+/* EFS superblock magic numbers */
+#define EFS_MAGIC	0x072959
+#define EFS_NEWMAGIC	0x07295a
+
+#define IS_EFS_MAGIC(x)	((x == EFS_MAGIC) || (x == EFS_NEWMAGIC))
+
+#define EFS_SUPER		1
+#define EFS_ROOTINODE		2
+
+/* efs superblock on disk */
+struct efs_super {
+	__be32		fs_size;        /* size of filesystem, in sectors */
+	__be32		fs_firstcg;     /* bb offset to first cg */
+	__be32		fs_cgfsize;     /* size of cylinder group in bb's */
+	__be16		fs_cgisize;     /* bb's of inodes per cylinder group */
+	__be16		fs_sectors;     /* sectors per track */
+	__be16		fs_heads;       /* heads per cylinder */
+	__be16		fs_ncg;         /* # of cylinder groups in filesystem */
+	__be16		fs_dirty;       /* fs needs to be fsck'd */
+	__be32		fs_time;        /* last super-block update */
+	__be32		fs_magic;       /* magic number */
+	char		fs_fname[6];    /* file system name */
+	char		fs_fpack[6];    /* file system pack name */
+	__be32		fs_bmsize;      /* size of bitmap in bytes */
+	__be32		fs_tfree;       /* total free data blocks */
+	__be32		fs_tinode;      /* total free inodes */
+	__be32		fs_bmblock;     /* bitmap location. */
+	__be32		fs_replsb;      /* Location of replicated superblock. */
+	__be32		fs_lastialloc;  /* last allocated inode */
+	char		fs_spare[20];   /* space for expansion - MUST BE ZERO */
+	__be32		fs_checksum;    /* checksum of volume portion of fs */
+};
+
+/* efs superblock information in memory */
+struct efs_sb_info {
+	__u32	fs_magic;	/* superblock magic number */
+	__u32	fs_start;	/* first block of filesystem */
+	__u32	first_block;	/* first data block in filesystem */
+	__u32	total_blocks;	/* total number of blocks in filesystem */
+	__u32	group_size;	/* # of blocks a group consists of */ 
+	__u32	data_free;	/* # of free data blocks */
+	__u32	inode_free;	/* # of free inodes */
+	__u16	inode_blocks;	/* # of blocks used for inodes in every grp */
+	__u16	total_groups;	/* # of groups */
+};
+
+#endif /* __EFS_FS_SB_H__ */
+
diff --git a/include/linux/efs_vh.h b/include/linux/efs_vh.h
new file mode 100644
index 00000000..8a11150c
--- /dev/null
+++ b/include/linux/efs_vh.h
@@ -0,0 +1,53 @@
+/*
+ * efs_vh.h
+ *
+ * Copyright (c) 1999 Al Smith
+ *
+ * Portions derived from IRIX header files (c) 1985 MIPS Computer Systems, Inc.
+ */
+
+#ifndef __EFS_VH_H__
+#define __EFS_VH_H__
+
+#define VHMAGIC		0xbe5a941	/* volume header magic number */
+#define NPARTAB		16		/* 16 unix partitions */
+#define NVDIR		15		/* max of 15 directory entries */
+#define BFNAMESIZE	16		/* max 16 chars in boot file name */
+#define VDNAMESIZE	8
+
+struct volume_directory {
+	char	vd_name[VDNAMESIZE];	/* name */
+	__be32	vd_lbn;			/* logical block number */
+	__be32	vd_nbytes;		/* file length in bytes */
+};
+
+struct partition_table {	/* one per logical partition */
+	__be32	pt_nblks;	/* # of logical blks in partition */
+	__be32	pt_firstlbn;	/* first lbn of partition */
+	__be32	pt_type;	/* use of partition */
+};
+
+struct volume_header {
+	__be32	vh_magic;			/* identifies volume header */
+	__be16	vh_rootpt;			/* root partition number */
+	__be16	vh_swappt;			/* swap partition number */
+	char	vh_bootfile[BFNAMESIZE];	/* name of file to boot */
+	char	pad[48];			/* device param space */
+	struct volume_directory vh_vd[NVDIR];	/* other vol hdr contents */
+	struct partition_table  vh_pt[NPARTAB];	/* device partition layout */
+	__be32	vh_csum;			/* volume header checksum */
+	__be32	vh_fill;			/* fill out to 512 bytes */
+};
+
+/* partition type sysv is used for EFS format CD-ROM partitions */
+#define SGI_SYSV	0x05
+#define SGI_EFS		0x07
+#define IS_EFS(x)	(((x) == SGI_EFS) || ((x) == SGI_SYSV))
+
+struct pt_types {
+	int	pt_type;
+	char	*pt_name;
+};
+
+#endif /* __EFS_VH_H__ */
+
diff --git a/include/linux/eisa.h b/include/linux/eisa.h
new file mode 100644
index 00000000..6925249a
--- /dev/null
+++ b/include/linux/eisa.h
@@ -0,0 +1,111 @@
+#ifndef _LINUX_EISA_H
+#define _LINUX_EISA_H
+
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+
+#define EISA_MAX_SLOTS 8
+
+#define EISA_MAX_RESOURCES 4
+
+/* A few EISA constants/offsets... */
+
+#define EISA_DMA1_STATUS            8
+#define EISA_INT1_CTRL           0x20
+#define EISA_INT1_MASK           0x21
+#define EISA_INT2_CTRL           0xA0
+#define EISA_INT2_MASK           0xA1
+#define EISA_DMA2_STATUS         0xD0
+#define EISA_DMA2_WRITE_SINGLE   0xD4
+#define EISA_EXT_NMI_RESET_CTRL 0x461
+#define EISA_INT1_EDGE_LEVEL    0x4D0
+#define EISA_INT2_EDGE_LEVEL    0x4D1
+#define EISA_VENDOR_ID_OFFSET   0xC80
+#define EISA_CONFIG_OFFSET      0xC84
+
+#define EISA_CONFIG_ENABLED         1
+#define EISA_CONFIG_FORCED          2
+
+/* There is not much we can say about an EISA device, apart from
+ * signature, slot number, and base address. dma_mask is set by
+ * default to parent device mask..*/
+
+struct eisa_device {
+	struct eisa_device_id id;
+	int                   slot;
+	int                   state;
+	unsigned long         base_addr;
+	struct resource       res[EISA_MAX_RESOURCES];
+	u64                   dma_mask;
+	struct device         dev; /* generic device */
+#ifdef CONFIG_EISA_NAMES
+	char		      pretty_name[50];
+#endif
+};
+
+#define to_eisa_device(n) container_of(n, struct eisa_device, dev)
+
+static inline int eisa_get_region_index (void *addr)
+{
+	unsigned long x = (unsigned long) addr;
+
+	x &= 0xc00;
+	return (x >> 12);
+}
+
+struct eisa_driver {
+	const struct eisa_device_id *id_table;
+	struct device_driver         driver;
+};
+
+#define to_eisa_driver(drv) container_of(drv,struct eisa_driver, driver)
+
+/* These external functions are only available when EISA support is enabled. */
+#ifdef CONFIG_EISA
+
+extern struct bus_type eisa_bus_type;
+int eisa_driver_register (struct eisa_driver *edrv);
+void eisa_driver_unregister (struct eisa_driver *edrv);
+
+#else /* !CONFIG_EISA */
+
+static inline int eisa_driver_register (struct eisa_driver *edrv) { return 0; }
+static inline void eisa_driver_unregister (struct eisa_driver *edrv) { }
+
+#endif /* !CONFIG_EISA */
+
+/* Mimics pci.h... */
+static inline void *eisa_get_drvdata (struct eisa_device *edev)
+{
+        return dev_get_drvdata(&edev->dev);
+}
+
+static inline void eisa_set_drvdata (struct eisa_device *edev, void *data)
+{
+        dev_set_drvdata(&edev->dev, data);
+}
+
+/* The EISA root device. There's rumours about machines with multiple
+ * busses (PA-RISC ?), so we try to handle that. */
+
+struct eisa_root_device {
+	struct device   *dev;	 /* Pointer to bridge device */
+	struct resource *res;
+	unsigned long    bus_base_addr;
+	int		 slots;  /* Max slot number */
+	int		 force_probe; /* Probe even when no slot 0 */
+	u64		 dma_mask; /* from bridge device */
+	int              bus_nr; /* Set by eisa_root_register */
+	struct resource  eisa_root_res;	/* ditto */
+};
+
+int eisa_root_register (struct eisa_root_device *root);
+
+#ifdef CONFIG_EISA
+extern int EISA_bus;
+#else
+# define EISA_bus 0
+#endif
+
+#endif
diff --git a/include/linux/elevator.h b/include/linux/elevator.h
new file mode 100644
index 00000000..7d4e0356
--- /dev/null
+++ b/include/linux/elevator.h
@@ -0,0 +1,208 @@
+#ifndef _LINUX_ELEVATOR_H
+#define _LINUX_ELEVATOR_H
+
+#include <linux/percpu.h>
+
+#ifdef CONFIG_BLOCK
+
+struct io_cq;
+
+typedef int (elevator_merge_fn) (struct request_queue *, struct request **,
+				 struct bio *);
+
+typedef void (elevator_merge_req_fn) (struct request_queue *, struct request *, struct request *);
+
+typedef void (elevator_merged_fn) (struct request_queue *, struct request *, int);
+
+typedef int (elevator_allow_merge_fn) (struct request_queue *, struct request *, struct bio *);
+
+typedef void (elevator_bio_merged_fn) (struct request_queue *,
+						struct request *, struct bio *);
+
+typedef int (elevator_dispatch_fn) (struct request_queue *, int);
+
+typedef void (elevator_add_req_fn) (struct request_queue *, struct request *);
+typedef struct request *(elevator_request_list_fn) (struct request_queue *, struct request *);
+typedef void (elevator_completed_req_fn) (struct request_queue *, struct request *);
+typedef int (elevator_may_queue_fn) (struct request_queue *, int);
+
+typedef void (elevator_init_icq_fn) (struct io_cq *);
+typedef void (elevator_exit_icq_fn) (struct io_cq *);
+typedef int (elevator_set_req_fn) (struct request_queue *, struct request *, gfp_t);
+typedef void (elevator_put_req_fn) (struct request *);
+typedef void (elevator_activate_req_fn) (struct request_queue *, struct request *);
+typedef void (elevator_deactivate_req_fn) (struct request_queue *, struct request *);
+
+typedef void *(elevator_init_fn) (struct request_queue *);
+typedef void (elevator_exit_fn) (struct elevator_queue *);
+
+struct elevator_ops
+{
+	elevator_merge_fn *elevator_merge_fn;
+	elevator_merged_fn *elevator_merged_fn;
+	elevator_merge_req_fn *elevator_merge_req_fn;
+	elevator_allow_merge_fn *elevator_allow_merge_fn;
+	elevator_bio_merged_fn *elevator_bio_merged_fn;
+
+	elevator_dispatch_fn *elevator_dispatch_fn;
+	elevator_add_req_fn *elevator_add_req_fn;
+	elevator_activate_req_fn *elevator_activate_req_fn;
+	elevator_deactivate_req_fn *elevator_deactivate_req_fn;
+
+	elevator_completed_req_fn *elevator_completed_req_fn;
+
+	elevator_request_list_fn *elevator_former_req_fn;
+	elevator_request_list_fn *elevator_latter_req_fn;
+
+	elevator_init_icq_fn *elevator_init_icq_fn;	/* see iocontext.h */
+	elevator_exit_icq_fn *elevator_exit_icq_fn;	/* ditto */
+
+	elevator_set_req_fn *elevator_set_req_fn;
+	elevator_put_req_fn *elevator_put_req_fn;
+
+	elevator_may_queue_fn *elevator_may_queue_fn;
+
+	elevator_init_fn *elevator_init_fn;
+	elevator_exit_fn *elevator_exit_fn;
+};
+
+#define ELV_NAME_MAX	(16)
+
+struct elv_fs_entry {
+	struct attribute attr;
+	ssize_t (*show)(struct elevator_queue *, char *);
+	ssize_t (*store)(struct elevator_queue *, const char *, size_t);
+};
+
+/*
+ * identifies an elevator type, such as AS or deadline
+ */
+struct elevator_type
+{
+	/* managed by elevator core */
+	struct kmem_cache *icq_cache;
+
+	/* fields provided by elevator implementation */
+	struct elevator_ops ops;
+	size_t icq_size;	/* see iocontext.h */
+	size_t icq_align;	/* ditto */
+	struct elv_fs_entry *elevator_attrs;
+	char elevator_name[ELV_NAME_MAX];
+	struct module *elevator_owner;
+
+	/* managed by elevator core */
+	char icq_cache_name[ELV_NAME_MAX + 5];	/* elvname + "_io_cq" */
+	struct list_head list;
+};
+
+/*
+ * each queue has an elevator_queue associated with it
+ */
+struct elevator_queue
+{
+	struct elevator_type *type;
+	void *elevator_data;
+	struct kobject kobj;
+	struct mutex sysfs_lock;
+	struct hlist_head *hash;
+	unsigned int registered:1;
+};
+
+/*
+ * block elevator interface
+ */
+extern void elv_dispatch_sort(struct request_queue *, struct request *);
+extern void elv_dispatch_add_tail(struct request_queue *, struct request *);
+extern void elv_add_request(struct request_queue *, struct request *, int);
+extern void __elv_add_request(struct request_queue *, struct request *, int);
+extern int elv_merge(struct request_queue *, struct request **, struct bio *);
+extern void elv_merge_requests(struct request_queue *, struct request *,
+			       struct request *);
+extern void elv_merged_request(struct request_queue *, struct request *, int);
+extern void elv_bio_merged(struct request_queue *q, struct request *,
+				struct bio *);
+extern void elv_requeue_request(struct request_queue *, struct request *);
+extern struct request *elv_former_request(struct request_queue *, struct request *);
+extern struct request *elv_latter_request(struct request_queue *, struct request *);
+extern int elv_register_queue(struct request_queue *q);
+extern void elv_unregister_queue(struct request_queue *q);
+extern int elv_may_queue(struct request_queue *, int);
+extern void elv_abort_queue(struct request_queue *);
+extern void elv_completed_request(struct request_queue *, struct request *);
+extern int elv_set_request(struct request_queue *, struct request *, gfp_t);
+extern void elv_put_request(struct request_queue *, struct request *);
+extern void elv_drain_elevator(struct request_queue *);
+
+/*
+ * io scheduler registration
+ */
+extern int elv_register(struct elevator_type *);
+extern void elv_unregister(struct elevator_type *);
+
+/*
+ * io scheduler sysfs switching
+ */
+extern ssize_t elv_iosched_show(struct request_queue *, char *);
+extern ssize_t elv_iosched_store(struct request_queue *, const char *, size_t);
+
+extern int elevator_init(struct request_queue *, char *);
+extern void elevator_exit(struct elevator_queue *);
+extern int elevator_change(struct request_queue *, const char *);
+extern bool elv_rq_merge_ok(struct request *, struct bio *);
+
+/*
+ * Helper functions.
+ */
+extern struct request *elv_rb_former_request(struct request_queue *, struct request *);
+extern struct request *elv_rb_latter_request(struct request_queue *, struct request *);
+
+/*
+ * rb support functions.
+ */
+extern void elv_rb_add(struct rb_root *, struct request *);
+extern void elv_rb_del(struct rb_root *, struct request *);
+extern struct request *elv_rb_find(struct rb_root *, sector_t);
+
+/*
+ * Return values from elevator merger
+ */
+#define ELEVATOR_NO_MERGE	0
+#define ELEVATOR_FRONT_MERGE	1
+#define ELEVATOR_BACK_MERGE	2
+
+/*
+ * Insertion selection
+ */
+#define ELEVATOR_INSERT_FRONT	1
+#define ELEVATOR_INSERT_BACK	2
+#define ELEVATOR_INSERT_SORT	3
+#define ELEVATOR_INSERT_REQUEUE	4
+#define ELEVATOR_INSERT_FLUSH	5
+#define ELEVATOR_INSERT_SORT_MERGE	6
+
+/*
+ * return values from elevator_may_queue_fn
+ */
+enum {
+	ELV_MQUEUE_MAY,
+	ELV_MQUEUE_NO,
+	ELV_MQUEUE_MUST,
+};
+
+#define rq_end_sector(rq)	(blk_rq_pos(rq) + blk_rq_sectors(rq))
+#define rb_entry_rq(node)	rb_entry((node), struct request, rb_node)
+
+/*
+ * Hack to reuse the csd.list list_head as the fifo time holder while
+ * the request is in the io scheduler. Saves an unsigned long in rq.
+ */
+#define rq_fifo_time(rq)	((unsigned long) (rq)->csd.list.next)
+#define rq_set_fifo_time(rq,exp)	((rq)->csd.list.next = (void *) (exp))
+#define rq_entry_fifo(ptr)	list_entry((ptr), struct request, queuelist)
+#define rq_fifo_clear(rq)	do {		\
+	list_del_init(&(rq)->queuelist);	\
+	INIT_LIST_HEAD(&(rq)->csd.list);	\
+	} while (0)
+
+#endif /* CONFIG_BLOCK */
+#endif
diff --git a/include/linux/elf-em.h b/include/linux/elf-em.h
new file mode 100644
index 00000000..8e2b7bac
--- /dev/null
+++ b/include/linux/elf-em.h
@@ -0,0 +1,56 @@
+#ifndef _LINUX_ELF_EM_H
+#define _LINUX_ELF_EM_H
+
+/* These constants define the various ELF target machines */
+#define EM_NONE		0
+#define EM_M32		1
+#define EM_SPARC	2
+#define EM_386		3
+#define EM_68K		4
+#define EM_88K		5
+#define EM_486		6	/* Perhaps disused */
+#define EM_860		7
+#define EM_MIPS		8	/* MIPS R3000 (officially, big-endian only) */
+				/* Next two are historical and binaries and
+				   modules of these types will be rejected by
+				   Linux.  */
+#define EM_MIPS_RS3_LE	10	/* MIPS R3000 little-endian */
+#define EM_MIPS_RS4_BE	10	/* MIPS R4000 big-endian */
+
+#define EM_PARISC	15	/* HPPA */
+#define EM_SPARC32PLUS	18	/* Sun's "v8plus" */
+#define EM_PPC		20	/* PowerPC */
+#define EM_PPC64	21	 /* PowerPC64 */
+#define EM_SPU		23	/* Cell BE SPU */
+#define EM_SH		42	/* SuperH */
+#define EM_SPARCV9	43	/* SPARC v9 64-bit */
+#define EM_IA_64	50	/* HP/Intel IA-64 */
+#define EM_X86_64	62	/* AMD x86-64 */
+#define EM_S390		22	/* IBM S/390 */
+#define EM_CRIS		76	/* Axis Communications 32-bit embedded processor */
+#define EM_V850		87	/* NEC v850 */
+#define EM_M32R		88	/* Renesas M32R */
+#define EM_H8_300	46	/* Renesas H8/300,300H,H8S */
+#define EM_MN10300	89	/* Panasonic/MEI MN10300, AM33 */
+#define EM_BLACKFIN     106     /* ADI Blackfin Processor */
+#define EM_TI_C6000	140	/* TI C6X DSPs */
+#define EM_FRV		0x5441	/* Fujitsu FR-V */
+#define EM_AVR32	0x18ad	/* Atmel AVR32 */
+
+/*
+ * This is an interim value that we will use until the committee comes
+ * up with a final number.
+ */
+#define EM_ALPHA	0x9026
+
+/* Bogus old v850 magic number, used by old tools. */
+#define EM_CYGNUS_V850	0x9080
+/* Bogus old m32r magic number, used by old tools. */
+#define EM_CYGNUS_M32R	0x9041
+/* This is the old interim value for S/390 architecture */
+#define EM_S390_OLD	0xA390
+/* Also Panasonic/MEI MN10300, AM33 */
+#define EM_CYGNUS_MN10300 0xbeef
+
+
+#endif /* _LINUX_ELF_EM_H */
diff --git a/include/linux/elf-fdpic.h b/include/linux/elf-fdpic.h
new file mode 100644
index 00000000..7cd2e80c
--- /dev/null
+++ b/include/linux/elf-fdpic.h
@@ -0,0 +1,70 @@
+/* elf-fdpic.h: FDPIC ELF load map
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_ELF_FDPIC_H
+#define _LINUX_ELF_FDPIC_H
+
+#include <linux/elf.h>
+
+#define PT_GNU_STACK    (PT_LOOS + 0x474e551)
+
+/* segment mappings for ELF FDPIC libraries/executables/interpreters */
+struct elf32_fdpic_loadseg {
+	Elf32_Addr	addr;		/* core address to which mapped */
+	Elf32_Addr	p_vaddr;	/* VMA recorded in file */
+	Elf32_Word	p_memsz;	/* allocation size recorded in file */
+};
+
+struct elf32_fdpic_loadmap {
+	Elf32_Half	version;	/* version of these structures, just in case... */
+	Elf32_Half	nsegs;		/* number of segments */
+	struct elf32_fdpic_loadseg segs[];
+};
+
+#define ELF32_FDPIC_LOADMAP_VERSION	0x0000
+
+/*
+ * binfmt binary parameters structure
+ */
+struct elf_fdpic_params {
+	struct elfhdr			hdr;		/* ref copy of ELF header */
+	struct elf_phdr			*phdrs;		/* ref copy of PT_PHDR table */
+	struct elf32_fdpic_loadmap	*loadmap;	/* loadmap to be passed to userspace */
+	unsigned long			elfhdr_addr;	/* mapped ELF header user address */
+	unsigned long			ph_addr;	/* mapped PT_PHDR user address */
+	unsigned long			map_addr;	/* mapped loadmap user address */
+	unsigned long			entry_addr;	/* mapped entry user address */
+	unsigned long			stack_size;	/* stack size requested (PT_GNU_STACK) */
+	unsigned long			dynamic_addr;	/* mapped PT_DYNAMIC user address */
+	unsigned long			load_addr;	/* user address at which to map binary */
+	unsigned long			flags;
+#define ELF_FDPIC_FLAG_ARRANGEMENT	0x0000000f	/* PT_LOAD arrangement flags */
+#define ELF_FDPIC_FLAG_INDEPENDENT	0x00000000	/* PT_LOADs can be put anywhere */
+#define ELF_FDPIC_FLAG_HONOURVADDR	0x00000001	/* PT_LOAD.vaddr must be honoured */
+#define ELF_FDPIC_FLAG_CONSTDISP	0x00000002	/* PT_LOADs require constant
+							 * displacement */
+#define ELF_FDPIC_FLAG_CONTIGUOUS	0x00000003	/* PT_LOADs should be contiguous */
+#define ELF_FDPIC_FLAG_EXEC_STACK	0x00000010	/* T if stack to be executable */
+#define ELF_FDPIC_FLAG_NOEXEC_STACK	0x00000020	/* T if stack not to be executable */
+#define ELF_FDPIC_FLAG_EXECUTABLE	0x00000040	/* T if this object is the executable */
+#define ELF_FDPIC_FLAG_PRESENT		0x80000000	/* T if this object is present */
+};
+
+#ifdef __KERNEL__
+#ifdef CONFIG_MMU
+extern void elf_fdpic_arch_lay_out_mm(struct elf_fdpic_params *exec_params,
+				      struct elf_fdpic_params *interp_params,
+				      unsigned long *start_stack,
+				      unsigned long *start_brk);
+#endif
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_ELF_FDPIC_H */
diff --git a/include/linux/elf.h b/include/linux/elf.h
new file mode 100644
index 00000000..999b4f52
--- /dev/null
+++ b/include/linux/elf.h
@@ -0,0 +1,449 @@
+#ifndef _LINUX_ELF_H
+#define _LINUX_ELF_H
+
+#include <linux/types.h>
+#include <linux/elf-em.h>
+#ifdef __KERNEL__
+#include <asm/elf.h>
+#endif
+
+/* 32-bit ELF base types. */
+typedef __u32	Elf32_Addr;
+typedef __u16	Elf32_Half;
+typedef __u32	Elf32_Off;
+typedef __s32	Elf32_Sword;
+typedef __u32	Elf32_Word;
+
+/* 64-bit ELF base types. */
+typedef __u64	Elf64_Addr;
+typedef __u16	Elf64_Half;
+typedef __s16	Elf64_SHalf;
+typedef __u64	Elf64_Off;
+typedef __s32	Elf64_Sword;
+typedef __u32	Elf64_Word;
+typedef __u64	Elf64_Xword;
+typedef __s64	Elf64_Sxword;
+
+/* These constants are for the segment types stored in the image headers */
+#define PT_NULL    0
+#define PT_LOAD    1
+#define PT_DYNAMIC 2
+#define PT_INTERP  3
+#define PT_NOTE    4
+#define PT_SHLIB   5
+#define PT_PHDR    6
+#define PT_TLS     7               /* Thread local storage segment */
+#define PT_LOOS    0x60000000      /* OS-specific */
+#define PT_HIOS    0x6fffffff      /* OS-specific */
+#define PT_LOPROC  0x70000000
+#define PT_HIPROC  0x7fffffff
+#define PT_GNU_EH_FRAME		0x6474e550
+
+#define PT_GNU_STACK	(PT_LOOS + 0x474e551)
+
+/*
+ * Extended Numbering
+ *
+ * If the real number of program header table entries is larger than
+ * or equal to PN_XNUM(0xffff), it is set to sh_info field of the
+ * section header at index 0, and PN_XNUM is set to e_phnum
+ * field. Otherwise, the section header at index 0 is zero
+ * initialized, if it exists.
+ *
+ * Specifications are available in:
+ *
+ * - Sun microsystems: Linker and Libraries.
+ *   Part No: 817-1984-17, September 2008.
+ *   URL: http://docs.sun.com/app/docs/doc/817-1984
+ *
+ * - System V ABI AMD64 Architecture Processor Supplement
+ *   Draft Version 0.99.,
+ *   May 11, 2009.
+ *   URL: http://www.x86-64.org/
+ */
+#define PN_XNUM 0xffff
+
+/* These constants define the different elf file types */
+#define ET_NONE   0
+#define ET_REL    1
+#define ET_EXEC   2
+#define ET_DYN    3
+#define ET_CORE   4
+#define ET_LOPROC 0xff00
+#define ET_HIPROC 0xffff
+
+/* This is the info that is needed to parse the dynamic section of the file */
+#define DT_NULL		0
+#define DT_NEEDED	1
+#define DT_PLTRELSZ	2
+#define DT_PLTGOT	3
+#define DT_HASH		4
+#define DT_STRTAB	5
+#define DT_SYMTAB	6
+#define DT_RELA		7
+#define DT_RELASZ	8
+#define DT_RELAENT	9
+#define DT_STRSZ	10
+#define DT_SYMENT	11
+#define DT_INIT		12
+#define DT_FINI		13
+#define DT_SONAME	14
+#define DT_RPATH 	15
+#define DT_SYMBOLIC	16
+#define DT_REL	        17
+#define DT_RELSZ	18
+#define DT_RELENT	19
+#define DT_PLTREL	20
+#define DT_DEBUG	21
+#define DT_TEXTREL	22
+#define DT_JMPREL	23
+#define DT_ENCODING	32
+#define OLD_DT_LOOS	0x60000000
+#define DT_LOOS		0x6000000d
+#define DT_HIOS		0x6ffff000
+#define DT_VALRNGLO	0x6ffffd00
+#define DT_VALRNGHI	0x6ffffdff
+#define DT_ADDRRNGLO	0x6ffffe00
+#define DT_ADDRRNGHI	0x6ffffeff
+#define DT_VERSYM	0x6ffffff0
+#define DT_RELACOUNT	0x6ffffff9
+#define DT_RELCOUNT	0x6ffffffa
+#define DT_FLAGS_1	0x6ffffffb
+#define DT_VERDEF	0x6ffffffc
+#define	DT_VERDEFNUM	0x6ffffffd
+#define DT_VERNEED	0x6ffffffe
+#define	DT_VERNEEDNUM	0x6fffffff
+#define OLD_DT_HIOS     0x6fffffff
+#define DT_LOPROC	0x70000000
+#define DT_HIPROC	0x7fffffff
+
+/* This info is needed when parsing the symbol table */
+#define STB_LOCAL  0
+#define STB_GLOBAL 1
+#define STB_WEAK   2
+
+#define STT_NOTYPE  0
+#define STT_OBJECT  1
+#define STT_FUNC    2
+#define STT_SECTION 3
+#define STT_FILE    4
+#define STT_COMMON  5
+#define STT_TLS     6
+
+#define ELF_ST_BIND(x)		((x) >> 4)
+#define ELF_ST_TYPE(x)		(((unsigned int) x) & 0xf)
+#define ELF32_ST_BIND(x)	ELF_ST_BIND(x)
+#define ELF32_ST_TYPE(x)	ELF_ST_TYPE(x)
+#define ELF64_ST_BIND(x)	ELF_ST_BIND(x)
+#define ELF64_ST_TYPE(x)	ELF_ST_TYPE(x)
+
+typedef struct dynamic{
+  Elf32_Sword d_tag;
+  union{
+    Elf32_Sword	d_val;
+    Elf32_Addr	d_ptr;
+  } d_un;
+} Elf32_Dyn;
+
+typedef struct {
+  Elf64_Sxword d_tag;		/* entry tag value */
+  union {
+    Elf64_Xword d_val;
+    Elf64_Addr d_ptr;
+  } d_un;
+} Elf64_Dyn;
+
+/* The following are used with relocations */
+#define ELF32_R_SYM(x) ((x) >> 8)
+#define ELF32_R_TYPE(x) ((x) & 0xff)
+
+#define ELF64_R_SYM(i)			((i) >> 32)
+#define ELF64_R_TYPE(i)			((i) & 0xffffffff)
+
+typedef struct elf32_rel {
+  Elf32_Addr	r_offset;
+  Elf32_Word	r_info;
+} Elf32_Rel;
+
+typedef struct elf64_rel {
+  Elf64_Addr r_offset;	/* Location at which to apply the action */
+  Elf64_Xword r_info;	/* index and type of relocation */
+} Elf64_Rel;
+
+typedef struct elf32_rela{
+  Elf32_Addr	r_offset;
+  Elf32_Word	r_info;
+  Elf32_Sword	r_addend;
+} Elf32_Rela;
+
+typedef struct elf64_rela {
+  Elf64_Addr r_offset;	/* Location at which to apply the action */
+  Elf64_Xword r_info;	/* index and type of relocation */
+  Elf64_Sxword r_addend;	/* Constant addend used to compute value */
+} Elf64_Rela;
+
+typedef struct elf32_sym{
+  Elf32_Word	st_name;
+  Elf32_Addr	st_value;
+  Elf32_Word	st_size;
+  unsigned char	st_info;
+  unsigned char	st_other;
+  Elf32_Half	st_shndx;
+} Elf32_Sym;
+
+typedef struct elf64_sym {
+  Elf64_Word st_name;		/* Symbol name, index in string tbl */
+  unsigned char	st_info;	/* Type and binding attributes */
+  unsigned char	st_other;	/* No defined meaning, 0 */
+  Elf64_Half st_shndx;		/* Associated section index */
+  Elf64_Addr st_value;		/* Value of the symbol */
+  Elf64_Xword st_size;		/* Associated symbol size */
+} Elf64_Sym;
+
+
+#define EI_NIDENT	16
+
+typedef struct elf32_hdr{
+  unsigned char	e_ident[EI_NIDENT];
+  Elf32_Half	e_type;
+  Elf32_Half	e_machine;
+  Elf32_Word	e_version;
+  Elf32_Addr	e_entry;  /* Entry point */
+  Elf32_Off	e_phoff;
+  Elf32_Off	e_shoff;
+  Elf32_Word	e_flags;
+  Elf32_Half	e_ehsize;
+  Elf32_Half	e_phentsize;
+  Elf32_Half	e_phnum;
+  Elf32_Half	e_shentsize;
+  Elf32_Half	e_shnum;
+  Elf32_Half	e_shstrndx;
+} Elf32_Ehdr;
+
+typedef struct elf64_hdr {
+  unsigned char	e_ident[EI_NIDENT];	/* ELF "magic number" */
+  Elf64_Half e_type;
+  Elf64_Half e_machine;
+  Elf64_Word e_version;
+  Elf64_Addr e_entry;		/* Entry point virtual address */
+  Elf64_Off e_phoff;		/* Program header table file offset */
+  Elf64_Off e_shoff;		/* Section header table file offset */
+  Elf64_Word e_flags;
+  Elf64_Half e_ehsize;
+  Elf64_Half e_phentsize;
+  Elf64_Half e_phnum;
+  Elf64_Half e_shentsize;
+  Elf64_Half e_shnum;
+  Elf64_Half e_shstrndx;
+} Elf64_Ehdr;
+
+/* These constants define the permissions on sections in the program
+   header, p_flags. */
+#define PF_R		0x4
+#define PF_W		0x2
+#define PF_X		0x1
+
+typedef struct elf32_phdr{
+  Elf32_Word	p_type;
+  Elf32_Off	p_offset;
+  Elf32_Addr	p_vaddr;
+  Elf32_Addr	p_paddr;
+  Elf32_Word	p_filesz;
+  Elf32_Word	p_memsz;
+  Elf32_Word	p_flags;
+  Elf32_Word	p_align;
+} Elf32_Phdr;
+
+typedef struct elf64_phdr {
+  Elf64_Word p_type;
+  Elf64_Word p_flags;
+  Elf64_Off p_offset;		/* Segment file offset */
+  Elf64_Addr p_vaddr;		/* Segment virtual address */
+  Elf64_Addr p_paddr;		/* Segment physical address */
+  Elf64_Xword p_filesz;		/* Segment size in file */
+  Elf64_Xword p_memsz;		/* Segment size in memory */
+  Elf64_Xword p_align;		/* Segment alignment, file & memory */
+} Elf64_Phdr;
+
+/* sh_type */
+#define SHT_NULL	0
+#define SHT_PROGBITS	1
+#define SHT_SYMTAB	2
+#define SHT_STRTAB	3
+#define SHT_RELA	4
+#define SHT_HASH	5
+#define SHT_DYNAMIC	6
+#define SHT_NOTE	7
+#define SHT_NOBITS	8
+#define SHT_REL		9
+#define SHT_SHLIB	10
+#define SHT_DYNSYM	11
+#define SHT_NUM		12
+#define SHT_LOPROC	0x70000000
+#define SHT_HIPROC	0x7fffffff
+#define SHT_LOUSER	0x80000000
+#define SHT_HIUSER	0xffffffff
+
+/* sh_flags */
+#define SHF_WRITE	0x1
+#define SHF_ALLOC	0x2
+#define SHF_EXECINSTR	0x4
+#define SHF_MASKPROC	0xf0000000
+
+/* special section indexes */
+#define SHN_UNDEF	0
+#define SHN_LORESERVE	0xff00
+#define SHN_LOPROC	0xff00
+#define SHN_HIPROC	0xff1f
+#define SHN_ABS		0xfff1
+#define SHN_COMMON	0xfff2
+#define SHN_HIRESERVE	0xffff
+ 
+typedef struct elf32_shdr {
+  Elf32_Word	sh_name;
+  Elf32_Word	sh_type;
+  Elf32_Word	sh_flags;
+  Elf32_Addr	sh_addr;
+  Elf32_Off	sh_offset;
+  Elf32_Word	sh_size;
+  Elf32_Word	sh_link;
+  Elf32_Word	sh_info;
+  Elf32_Word	sh_addralign;
+  Elf32_Word	sh_entsize;
+} Elf32_Shdr;
+
+typedef struct elf64_shdr {
+  Elf64_Word sh_name;		/* Section name, index in string tbl */
+  Elf64_Word sh_type;		/* Type of section */
+  Elf64_Xword sh_flags;		/* Miscellaneous section attributes */
+  Elf64_Addr sh_addr;		/* Section virtual addr at execution */
+  Elf64_Off sh_offset;		/* Section file offset */
+  Elf64_Xword sh_size;		/* Size of section in bytes */
+  Elf64_Word sh_link;		/* Index of another section */
+  Elf64_Word sh_info;		/* Additional section information */
+  Elf64_Xword sh_addralign;	/* Section alignment */
+  Elf64_Xword sh_entsize;	/* Entry size if section holds table */
+} Elf64_Shdr;
+
+#define	EI_MAG0		0		/* e_ident[] indexes */
+#define	EI_MAG1		1
+#define	EI_MAG2		2
+#define	EI_MAG3		3
+#define	EI_CLASS	4
+#define	EI_DATA		5
+#define	EI_VERSION	6
+#define	EI_OSABI	7
+#define	EI_PAD		8
+
+#define	ELFMAG0		0x7f		/* EI_MAG */
+#define	ELFMAG1		'E'
+#define	ELFMAG2		'L'
+#define	ELFMAG3		'F'
+#define	ELFMAG		"\177ELF"
+#define	SELFMAG		4
+
+#define	ELFCLASSNONE	0		/* EI_CLASS */
+#define	ELFCLASS32	1
+#define	ELFCLASS64	2
+#define	ELFCLASSNUM	3
+
+#define ELFDATANONE	0		/* e_ident[EI_DATA] */
+#define ELFDATA2LSB	1
+#define ELFDATA2MSB	2
+
+#define EV_NONE		0		/* e_version, EI_VERSION */
+#define EV_CURRENT	1
+#define EV_NUM		2
+
+#define ELFOSABI_NONE	0
+#define ELFOSABI_LINUX	3
+
+#ifndef ELF_OSABI
+#define ELF_OSABI ELFOSABI_NONE
+#endif
+
+/*
+ * Notes used in ET_CORE. Architectures export some of the arch register sets
+ * using the corresponding note types via the PTRACE_GETREGSET and
+ * PTRACE_SETREGSET requests.
+ */
+#define NT_PRSTATUS	1
+#define NT_PRFPREG	2
+#define NT_PRPSINFO	3
+#define NT_TASKSTRUCT	4
+#define NT_AUXV		6
+#define NT_PRXFPREG     0x46e62b7f      /* copied from gdb5.1/include/elf/common.h */
+#define NT_PPC_VMX	0x100		/* PowerPC Altivec/VMX registers */
+#define NT_PPC_SPE	0x101		/* PowerPC SPE/EVR registers */
+#define NT_PPC_VSX	0x102		/* PowerPC VSX registers */
+#define NT_386_TLS	0x200		/* i386 TLS slots (struct user_desc) */
+#define NT_386_IOPERM	0x201		/* x86 io permission bitmap (1=deny) */
+#define NT_X86_XSTATE	0x202		/* x86 extended state using xsave */
+#define NT_S390_HIGH_GPRS	0x300	/* s390 upper register halves */
+#define NT_S390_TIMER	0x301		/* s390 timer register */
+#define NT_S390_TODCMP	0x302		/* s390 TOD clock comparator register */
+#define NT_S390_TODPREG	0x303		/* s390 TOD programmable register */
+#define NT_S390_CTRS	0x304		/* s390 control registers */
+#define NT_S390_PREFIX	0x305		/* s390 prefix register */
+#define NT_S390_LAST_BREAK	0x306	/* s390 breaking event address */
+#define NT_S390_SYSTEM_CALL	0x307	/* s390 system call restart data */
+#define NT_ARM_VFP	0x400		/* ARM VFP/NEON registers */
+
+
+/* Note header in a PT_NOTE section */
+typedef struct elf32_note {
+  Elf32_Word	n_namesz;	/* Name size */
+  Elf32_Word	n_descsz;	/* Content size */
+  Elf32_Word	n_type;		/* Content type */
+} Elf32_Nhdr;
+
+/* Note header in a PT_NOTE section */
+typedef struct elf64_note {
+  Elf64_Word n_namesz;	/* Name size */
+  Elf64_Word n_descsz;	/* Content size */
+  Elf64_Word n_type;	/* Content type */
+} Elf64_Nhdr;
+
+#ifdef __KERNEL__
+#ifndef elf_read_implies_exec
+  /* Executables for which elf_read_implies_exec() returns TRUE will
+     have the READ_IMPLIES_EXEC personality flag set automatically.
+     Override in asm/elf.h as needed.  */
+# define elf_read_implies_exec(ex, have_pt_gnu_stack)	0
+#endif
+
+#if ELF_CLASS == ELFCLASS32
+
+extern Elf32_Dyn _DYNAMIC [];
+#define elfhdr		elf32_hdr
+#define elf_phdr	elf32_phdr
+#define elf_shdr	elf32_shdr
+#define elf_note	elf32_note
+#define elf_addr_t	Elf32_Off
+#define Elf_Half	Elf32_Half
+
+#else
+
+extern Elf64_Dyn _DYNAMIC [];
+#define elfhdr		elf64_hdr
+#define elf_phdr	elf64_phdr
+#define elf_shdr	elf64_shdr
+#define elf_note	elf64_note
+#define elf_addr_t	Elf64_Off
+#define Elf_Half	Elf64_Half
+
+#endif
+
+/* Optional callbacks to write extra ELF notes. */
+struct file;
+
+#ifndef ARCH_HAVE_EXTRA_ELF_NOTES
+static inline int elf_coredump_extra_notes_size(void) { return 0; }
+static inline int elf_coredump_extra_notes_write(struct file *file,
+			loff_t *foffset) { return 0; }
+#else
+extern int elf_coredump_extra_notes_size(void);
+extern int elf_coredump_extra_notes_write(struct file *file, loff_t *foffset);
+#endif
+#endif /* __KERNEL__ */
+#endif /* _LINUX_ELF_H */
diff --git a/include/linux/elfcore-compat.h b/include/linux/elfcore-compat.h
new file mode 100644
index 00000000..0a90e1c3
--- /dev/null
+++ b/include/linux/elfcore-compat.h
@@ -0,0 +1,55 @@
+#ifndef _LINUX_ELFCORE_COMPAT_H
+#define _LINUX_ELFCORE_COMPAT_H
+
+#include <linux/elf.h>
+#include <linux/elfcore.h>
+#include <linux/compat.h>
+
+/*
+ * Make sure these layouts match the linux/elfcore.h native definitions.
+ */
+
+struct compat_elf_siginfo
+{
+	compat_int_t			si_signo;
+	compat_int_t			si_code;
+	compat_int_t			si_errno;
+};
+
+struct compat_elf_prstatus
+{
+	struct compat_elf_siginfo	pr_info;
+	short				pr_cursig;
+	compat_ulong_t			pr_sigpend;
+	compat_ulong_t			pr_sighold;
+	compat_pid_t			pr_pid;
+	compat_pid_t			pr_ppid;
+	compat_pid_t			pr_pgrp;
+	compat_pid_t			pr_sid;
+	struct compat_timeval		pr_utime;
+	struct compat_timeval		pr_stime;
+	struct compat_timeval		pr_cutime;
+	struct compat_timeval		pr_cstime;
+	compat_elf_gregset_t		pr_reg;
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+	compat_ulong_t			pr_exec_fdpic_loadmap;
+	compat_ulong_t			pr_interp_fdpic_loadmap;
+#endif
+	compat_int_t			pr_fpvalid;
+};
+
+struct compat_elf_prpsinfo
+{
+	char				pr_state;
+	char				pr_sname;
+	char				pr_zomb;
+	char				pr_nice;
+	compat_ulong_t			pr_flag;
+	__compat_uid_t			pr_uid;
+	__compat_gid_t			pr_gid;
+	compat_pid_t			pr_pid, pr_ppid, pr_pgrp, pr_sid;
+	char				pr_fname[16];
+	char				pr_psargs[ELF_PRARGSZ];
+};
+
+#endif /* _LINUX_ELFCORE_COMPAT_H */
diff --git a/include/linux/elfcore.h b/include/linux/elfcore.h
new file mode 100644
index 00000000..0698c79f
--- /dev/null
+++ b/include/linux/elfcore.h
@@ -0,0 +1,172 @@
+#ifndef _LINUX_ELFCORE_H
+#define _LINUX_ELFCORE_H
+
+#include <linux/types.h>
+#include <linux/signal.h>
+#include <linux/time.h>
+#ifdef __KERNEL__
+#include <linux/user.h>
+#include <linux/bug.h>
+#endif
+#include <linux/ptrace.h>
+#include <linux/elf.h>
+#include <linux/fs.h>
+
+struct elf_siginfo
+{
+	int	si_signo;			/* signal number */
+	int	si_code;			/* extra code */
+	int	si_errno;			/* errno */
+};
+
+#ifdef __KERNEL__
+#include <asm/elf.h>
+#endif
+
+#ifndef __KERNEL__
+typedef elf_greg_t greg_t;
+typedef elf_gregset_t gregset_t;
+typedef elf_fpregset_t fpregset_t;
+typedef elf_fpxregset_t fpxregset_t;
+#define NGREG ELF_NGREG
+#endif
+
+/*
+ * Definitions to generate Intel SVR4-like core files.
+ * These mostly have the same names as the SVR4 types with "elf_"
+ * tacked on the front to prevent clashes with linux definitions,
+ * and the typedef forms have been avoided.  This is mostly like
+ * the SVR4 structure, but more Linuxy, with things that Linux does
+ * not support and which gdb doesn't really use excluded.
+ * Fields present but not used are marked with "XXX".
+ */
+struct elf_prstatus
+{
+#if 0
+	long	pr_flags;	/* XXX Process flags */
+	short	pr_why;		/* XXX Reason for process halt */
+	short	pr_what;	/* XXX More detailed reason */
+#endif
+	struct elf_siginfo pr_info;	/* Info associated with signal */
+	short	pr_cursig;		/* Current signal */
+	unsigned long pr_sigpend;	/* Set of pending signals */
+	unsigned long pr_sighold;	/* Set of held signals */
+#if 0
+	struct sigaltstack pr_altstack;	/* Alternate stack info */
+	struct sigaction pr_action;	/* Signal action for current sig */
+#endif
+	pid_t	pr_pid;
+	pid_t	pr_ppid;
+	pid_t	pr_pgrp;
+	pid_t	pr_sid;
+	struct timeval pr_utime;	/* User time */
+	struct timeval pr_stime;	/* System time */
+	struct timeval pr_cutime;	/* Cumulative user time */
+	struct timeval pr_cstime;	/* Cumulative system time */
+#if 0
+	long	pr_instr;		/* Current instruction */
+#endif
+	elf_gregset_t pr_reg;	/* GP registers */
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+	/* When using FDPIC, the loadmap addresses need to be communicated
+	 * to GDB in order for GDB to do the necessary relocations.  The
+	 * fields (below) used to communicate this information are placed
+	 * immediately after ``pr_reg'', so that the loadmap addresses may
+	 * be viewed as part of the register set if so desired.
+	 */
+	unsigned long pr_exec_fdpic_loadmap;
+	unsigned long pr_interp_fdpic_loadmap;
+#endif
+	int pr_fpvalid;		/* True if math co-processor being used.  */
+};
+
+#define ELF_PRARGSZ	(80)	/* Number of chars for args */
+
+struct elf_prpsinfo
+{
+	char	pr_state;	/* numeric process state */
+	char	pr_sname;	/* char for pr_state */
+	char	pr_zomb;	/* zombie */
+	char	pr_nice;	/* nice val */
+	unsigned long pr_flag;	/* flags */
+	__kernel_uid_t	pr_uid;
+	__kernel_gid_t	pr_gid;
+	pid_t	pr_pid, pr_ppid, pr_pgrp, pr_sid;
+	/* Lots missing */
+	char	pr_fname[16];	/* filename of executable */
+	char	pr_psargs[ELF_PRARGSZ];	/* initial part of arg list */
+};
+
+#ifndef __KERNEL__
+typedef struct elf_prstatus prstatus_t;
+typedef struct elf_prpsinfo prpsinfo_t;
+#define PRARGSZ ELF_PRARGSZ 
+#endif
+
+#ifdef __KERNEL__
+static inline void elf_core_copy_regs(elf_gregset_t *elfregs, struct pt_regs *regs)
+{
+#ifdef ELF_CORE_COPY_REGS
+	ELF_CORE_COPY_REGS((*elfregs), regs)
+#else
+	BUG_ON(sizeof(*elfregs) != sizeof(*regs));
+	*(struct pt_regs *)elfregs = *regs;
+#endif
+}
+
+static inline void elf_core_copy_kernel_regs(elf_gregset_t *elfregs, struct pt_regs *regs)
+{
+#ifdef ELF_CORE_COPY_KERNEL_REGS
+	ELF_CORE_COPY_KERNEL_REGS((*elfregs), regs);
+#else
+	elf_core_copy_regs(elfregs, regs);
+#endif
+}
+
+static inline int elf_core_copy_task_regs(struct task_struct *t, elf_gregset_t* elfregs)
+{
+#if defined (ELF_CORE_COPY_TASK_REGS)
+	return ELF_CORE_COPY_TASK_REGS(t, elfregs);
+#elif defined (task_pt_regs)
+	elf_core_copy_regs(elfregs, task_pt_regs(t));
+#endif
+	return 0;
+}
+
+extern int dump_fpu (struct pt_regs *, elf_fpregset_t *);
+
+static inline int elf_core_copy_task_fpregs(struct task_struct *t, struct pt_regs *regs, elf_fpregset_t *fpu)
+{
+#ifdef ELF_CORE_COPY_FPREGS
+	return ELF_CORE_COPY_FPREGS(t, fpu);
+#else
+	return dump_fpu(regs, fpu);
+#endif
+}
+
+#ifdef ELF_CORE_COPY_XFPREGS
+static inline int elf_core_copy_task_xfpregs(struct task_struct *t, elf_fpxregset_t *xfpu)
+{
+	return ELF_CORE_COPY_XFPREGS(t, xfpu);
+}
+#endif
+
+/*
+ * These functions parameterize elf_core_dump in fs/binfmt_elf.c to write out
+ * extra segments containing the gate DSO contents.  Dumping its
+ * contents makes post-mortem fully interpretable later without matching up
+ * the same kernel and hardware config to see what PC values meant.
+ * Dumping its extra ELF program headers includes all the other information
+ * a debugger needs to easily find how the gate DSO was being used.
+ */
+extern Elf_Half elf_core_extra_phdrs(void);
+extern int
+elf_core_write_extra_phdrs(struct file *file, loff_t offset, size_t *size,
+			   unsigned long limit);
+extern int
+elf_core_write_extra_data(struct file *file, size_t *size, unsigned long limit);
+extern size_t elf_core_extra_data_size(void);
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_ELFCORE_H */
diff --git a/include/linux/elfnote.h b/include/linux/elfnote.h
new file mode 100644
index 00000000..278e3ef0
--- /dev/null
+++ b/include/linux/elfnote.h
@@ -0,0 +1,98 @@
+#ifndef _LINUX_ELFNOTE_H
+#define _LINUX_ELFNOTE_H
+/*
+ * Helper macros to generate ELF Note structures, which are put into a
+ * PT_NOTE segment of the final vmlinux image.  These are useful for
+ * including name-value pairs of metadata into the kernel binary (or
+ * modules?) for use by external programs.
+ *
+ * Each note has three parts: a name, a type and a desc.  The name is
+ * intended to distinguish the note's originator, so it would be a
+ * company, project, subsystem, etc; it must be in a suitable form for
+ * use in a section name.  The type is an integer which is used to tag
+ * the data, and is considered to be within the "name" namespace (so
+ * "FooCo"'s type 42 is distinct from "BarProj"'s type 42).  The
+ * "desc" field is the actual data.  There are no constraints on the
+ * desc field's contents, though typically they're fairly small.
+ *
+ * All notes from a given NAME are put into a section named
+ * .note.NAME.  When the kernel image is finally linked, all the notes
+ * are packed into a single .notes section, which is mapped into the
+ * PT_NOTE segment.  Because notes for a given name are grouped into
+ * the same section, they'll all be adjacent the output file.
+ *
+ * This file defines macros for both C and assembler use.  Their
+ * syntax is slightly different, but they're semantically similar.
+ *
+ * See the ELF specification for more detail about ELF notes.
+ */
+
+#ifdef __ASSEMBLER__
+/*
+ * Generate a structure with the same shape as Elf{32,64}_Nhdr (which
+ * turn out to be the same size and shape), followed by the name and
+ * desc data with appropriate padding.  The 'desctype' argument is the
+ * assembler pseudo op defining the type of the data e.g. .asciz while
+ * 'descdata' is the data itself e.g.  "hello, world".
+ *
+ * e.g. ELFNOTE(XYZCo, 42, .asciz, "forty-two")
+ *      ELFNOTE(XYZCo, 12, .long, 0xdeadbeef)
+ */
+#define ELFNOTE_START(name, type, flags)	\
+.pushsection .note.name, flags,@note	;	\
+  .balign 4				;	\
+  .long 2f - 1f		/* namesz */	;	\
+  .long 4484f - 3f	/* descsz */	;	\
+  .long type				;	\
+1:.asciz #name				;	\
+2:.balign 4				;	\
+3:
+
+#define ELFNOTE_END				\
+4484:.balign 4				;	\
+.popsection				;
+
+#define ELFNOTE(name, type, desc)		\
+	ELFNOTE_START(name, type, "")		\
+		desc			;	\
+	ELFNOTE_END
+
+#else	/* !__ASSEMBLER__ */
+#include <linux/elf.h>
+/*
+ * Use an anonymous structure which matches the shape of
+ * Elf{32,64}_Nhdr, but includes the name and desc data.  The size and
+ * type of name and desc depend on the macro arguments.  "name" must
+ * be a literal string, and "desc" must be passed by value.  You may
+ * only define one note per line, since __LINE__ is used to generate
+ * unique symbols.
+ */
+#define _ELFNOTE_PASTE(a,b)	a##b
+#define _ELFNOTE(size, name, unique, type, desc)			\
+	static const struct {						\
+		struct elf##size##_note _nhdr;				\
+		unsigned char _name[sizeof(name)]			\
+		__attribute__((aligned(sizeof(Elf##size##_Word))));	\
+		typeof(desc) _desc					\
+			     __attribute__((aligned(sizeof(Elf##size##_Word)))); \
+	} _ELFNOTE_PASTE(_note_, unique)				\
+		__used							\
+		__attribute__((section(".note." name),			\
+			       aligned(sizeof(Elf##size##_Word)),	\
+			       unused)) = {				\
+		{							\
+			sizeof(name),					\
+			sizeof(desc),					\
+			type,						\
+		},							\
+		name,							\
+		desc							\
+	}
+#define ELFNOTE(size, name, type, desc)		\
+	_ELFNOTE(size, name, __LINE__, type, desc)
+
+#define ELFNOTE32(name, type, desc) ELFNOTE(32, name, type, desc)
+#define ELFNOTE64(name, type, desc) ELFNOTE(64, name, type, desc)
+#endif	/* __ASSEMBLER__ */
+
+#endif /* _LINUX_ELFNOTE_H */
diff --git a/include/linux/enclosure.h b/include/linux/enclosure.h
new file mode 100644
index 00000000..9a33c5f7
--- /dev/null
+++ b/include/linux/enclosure.h
@@ -0,0 +1,133 @@
+/*
+ * Enclosure Services
+ *
+ * Copyright (C) 2008 James Bottomley <James.Bottomley@HansenPartnership.com>
+ *
+**-----------------------------------------------------------------------------
+**
+**  This program is free software; you can redistribute it and/or
+**  modify it under the terms of the GNU General Public License
+**  version 2 as published by the Free Software Foundation.
+**
+**  This program is distributed in the hope that it will be useful,
+**  but WITHOUT ANY WARRANTY; without even the implied warranty of
+**  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+**  GNU General Public License for more details.
+**
+**  You should have received a copy of the GNU General Public License
+**  along with this program; if not, write to the Free Software
+**  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+**
+**-----------------------------------------------------------------------------
+*/
+#ifndef _LINUX_ENCLOSURE_H_
+#define _LINUX_ENCLOSURE_H_
+
+#include <linux/device.h>
+#include <linux/list.h>
+
+/* A few generic types ... taken from ses-2 */
+enum enclosure_component_type {
+	ENCLOSURE_COMPONENT_DEVICE = 0x01,
+	ENCLOSURE_COMPONENT_ARRAY_DEVICE = 0x17,
+};
+
+/* ses-2 common element status */
+enum enclosure_status {
+	ENCLOSURE_STATUS_UNSUPPORTED = 0,
+	ENCLOSURE_STATUS_OK,
+	ENCLOSURE_STATUS_CRITICAL,
+	ENCLOSURE_STATUS_NON_CRITICAL,
+	ENCLOSURE_STATUS_UNRECOVERABLE,
+	ENCLOSURE_STATUS_NOT_INSTALLED,
+	ENCLOSURE_STATUS_UNKNOWN,
+	ENCLOSURE_STATUS_UNAVAILABLE,
+	/* last element for counting purposes */
+	ENCLOSURE_STATUS_MAX
+};
+
+/* SFF-8485 activity light settings */
+enum enclosure_component_setting {
+	ENCLOSURE_SETTING_DISABLED = 0,
+	ENCLOSURE_SETTING_ENABLED = 1,
+	ENCLOSURE_SETTING_BLINK_A_ON_OFF = 2,
+	ENCLOSURE_SETTING_BLINK_A_OFF_ON = 3,
+	ENCLOSURE_SETTING_BLINK_B_ON_OFF = 6,
+	ENCLOSURE_SETTING_BLINK_B_OFF_ON = 7,
+};
+
+struct enclosure_device;
+struct enclosure_component;
+struct enclosure_component_callbacks {
+	void (*get_status)(struct enclosure_device *,
+			     struct enclosure_component *);
+	int (*set_status)(struct enclosure_device *,
+			  struct enclosure_component *,
+			  enum enclosure_status);
+	void (*get_fault)(struct enclosure_device *,
+			  struct enclosure_component *);
+	int (*set_fault)(struct enclosure_device *,
+			 struct enclosure_component *,
+			 enum enclosure_component_setting);
+	void (*get_active)(struct enclosure_device *,
+			   struct enclosure_component *);
+	int (*set_active)(struct enclosure_device *,
+			  struct enclosure_component *,
+			  enum enclosure_component_setting);
+	void (*get_locate)(struct enclosure_device *,
+			   struct enclosure_component *);
+	int (*set_locate)(struct enclosure_device *,
+			  struct enclosure_component *,
+			  enum enclosure_component_setting);
+};
+
+
+struct enclosure_component {
+	void *scratch;
+	struct device cdev;
+	struct device *dev;
+	enum enclosure_component_type type;
+	int number;
+	int fault;
+	int active;
+	int locate;
+	enum enclosure_status status;
+};
+
+struct enclosure_device {
+	void *scratch;
+	struct list_head node;
+	struct device edev;
+	struct enclosure_component_callbacks *cb;
+	int components;
+	struct enclosure_component component[0];
+};
+
+static inline struct enclosure_device *
+to_enclosure_device(struct device *dev)
+{
+	return container_of(dev, struct enclosure_device, edev);
+}
+
+static inline struct enclosure_component *
+to_enclosure_component(struct device *dev)
+{
+	return container_of(dev, struct enclosure_component, cdev);
+}
+
+struct enclosure_device *
+enclosure_register(struct device *, const char *, int,
+		   struct enclosure_component_callbacks *);
+void enclosure_unregister(struct enclosure_device *);
+struct enclosure_component *
+enclosure_component_register(struct enclosure_device *, unsigned int,
+				 enum enclosure_component_type, const char *);
+int enclosure_add_device(struct enclosure_device *enclosure, int component,
+			 struct device *dev);
+int enclosure_remove_device(struct enclosure_device *, struct device *);
+struct enclosure_device *enclosure_find(struct device *dev,
+					struct enclosure_device *start);
+int enclosure_for_each_device(int (*fn)(struct enclosure_device *, void *),
+			      void *data);
+
+#endif /* _LINUX_ENCLOSURE_H_ */
diff --git a/include/linux/err.h b/include/linux/err.h
new file mode 100644
index 00000000..f2edce25
--- /dev/null
+++ b/include/linux/err.h
@@ -0,0 +1,65 @@
+#ifndef _LINUX_ERR_H
+#define _LINUX_ERR_H
+
+#include <linux/compiler.h>
+
+#include <asm/errno.h>
+
+/*
+ * Kernel pointers have redundant information, so we can use a
+ * scheme where we can return either an error code or a dentry
+ * pointer with the same return value.
+ *
+ * This should be a per-architecture thing, to allow different
+ * error and pointer decisions.
+ */
+#define MAX_ERRNO	4095
+
+#ifndef __ASSEMBLY__
+
+#define IS_ERR_VALUE(x) unlikely((x) >= (unsigned long)-MAX_ERRNO)
+
+static inline void * __must_check ERR_PTR(long error)
+{
+	return (void *) error;
+}
+
+static inline long __must_check PTR_ERR(const void *ptr)
+{
+	return (long) ptr;
+}
+
+static inline long __must_check IS_ERR(const void *ptr)
+{
+	return IS_ERR_VALUE((unsigned long)ptr);
+}
+
+static inline long __must_check IS_ERR_OR_NULL(const void *ptr)
+{
+	return !ptr || IS_ERR_VALUE((unsigned long)ptr);
+}
+
+/**
+ * ERR_CAST - Explicitly cast an error-valued pointer to another pointer type
+ * @ptr: The pointer to cast.
+ *
+ * Explicitly cast an error-valued pointer to another pointer type in such a
+ * way as to make it clear that's what's going on.
+ */
+static inline void * __must_check ERR_CAST(const void *ptr)
+{
+	/* cast away the const */
+	return (void *) ptr;
+}
+
+static inline int __must_check PTR_RET(const void *ptr)
+{
+	if (IS_ERR(ptr))
+		return PTR_ERR(ptr);
+	else
+		return 0;
+}
+
+#endif
+
+#endif /* _LINUX_ERR_H */
diff --git a/include/linux/errno.h b/include/linux/errno.h
new file mode 100644
index 00000000..2d09bfa5
--- /dev/null
+++ b/include/linux/errno.h
@@ -0,0 +1,35 @@
+#ifndef _LINUX_ERRNO_H
+#define _LINUX_ERRNO_H
+
+#include <asm/errno.h>
+
+#ifdef __KERNEL__
+
+/*
+ * These should never be seen by user programs.  To return one of ERESTART*
+ * codes, signal_pending() MUST be set.  Note that ptrace can observe these
+ * at syscall exit tracing, but they will never be left for the debugged user
+ * process to see.
+ */
+#define ERESTARTSYS	512
+#define ERESTARTNOINTR	513
+#define ERESTARTNOHAND	514	/* restart if no handler.. */
+#define ENOIOCTLCMD	515	/* No ioctl command */
+#define ERESTART_RESTARTBLOCK 516 /* restart by calling sys_restart_syscall */
+#define EPROBE_DEFER	517	/* Driver requests probe retry */
+
+/* Defined for the NFSv3 protocol */
+#define EBADHANDLE	521	/* Illegal NFS file handle */
+#define ENOTSYNC	522	/* Update synchronization mismatch */
+#define EBADCOOKIE	523	/* Cookie is stale */
+#define ENOTSUPP	524	/* Operation is not supported */
+#define ETOOSMALL	525	/* Buffer or request is too small */
+#define ESERVERFAULT	526	/* An untranslatable error occurred */
+#define EBADTYPE	527	/* Type not supported by server */
+#define EJUKEBOX	528	/* Request initiated, but will not complete before timeout */
+#define EIOCBQUEUED	529	/* iocb queued, will get completion event */
+#define EIOCBRETRY	530	/* iocb queued, will trigger a retry */
+
+#endif
+
+#endif
diff --git a/include/linux/errqueue.h b/include/linux/errqueue.h
new file mode 100644
index 00000000..fd0628be
--- /dev/null
+++ b/include/linux/errqueue.h
@@ -0,0 +1,48 @@
+#ifndef _LINUX_ERRQUEUE_H
+#define _LINUX_ERRQUEUE_H 1
+
+#include <linux/types.h>
+
+struct sock_extended_err {
+	__u32	ee_errno;	
+	__u8	ee_origin;
+	__u8	ee_type;
+	__u8	ee_code;
+	__u8	ee_pad;
+	__u32   ee_info;
+	__u32   ee_data;
+};
+
+#define SO_EE_ORIGIN_NONE	0
+#define SO_EE_ORIGIN_LOCAL	1
+#define SO_EE_ORIGIN_ICMP	2
+#define SO_EE_ORIGIN_ICMP6	3
+#define SO_EE_ORIGIN_TXSTATUS	4
+#define SO_EE_ORIGIN_TIMESTAMPING SO_EE_ORIGIN_TXSTATUS
+
+#define SO_EE_OFFENDER(ee)	((struct sockaddr*)((ee)+1))
+
+#ifdef __KERNEL__
+
+#include <net/ip.h>
+#if IS_ENABLED(CONFIG_IPV6)
+#include <linux/ipv6.h>
+#endif
+
+#define SKB_EXT_ERR(skb) ((struct sock_exterr_skb *) ((skb)->cb))
+
+struct sock_exterr_skb {
+	union {
+		struct inet_skb_parm	h4;
+#if IS_ENABLED(CONFIG_IPV6)
+		struct inet6_skb_parm	h6;
+#endif
+	} header;
+	struct sock_extended_err	ee;
+	u16				addr_offset;
+	__be16				port;
+};
+
+#endif
+
+#endif
diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
new file mode 100644
index 00000000..fe5136d8
--- /dev/null
+++ b/include/linux/etherdevice.h
@@ -0,0 +1,280 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  NET  is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the Ethernet handlers.
+ *
+ * Version:	@(#)eth.h	1.0.4	05/13/93
+ *
+ * Authors:	Ross Biro
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		Relocated to include/linux where it belongs by Alan Cox 
+ *							<gw4pts@gw4pts.ampr.org>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ *	WARNING: This move may well be temporary. This file will get merged with others RSN.
+ *
+ */
+#ifndef _LINUX_ETHERDEVICE_H
+#define _LINUX_ETHERDEVICE_H
+
+#include <linux/if_ether.h>
+#include <linux/netdevice.h>
+#include <linux/random.h>
+#include <asm/unaligned.h>
+
+#ifdef __KERNEL__
+extern __be16		eth_type_trans(struct sk_buff *skb, struct net_device *dev);
+extern const struct header_ops eth_header_ops;
+
+extern int eth_header(struct sk_buff *skb, struct net_device *dev,
+		      unsigned short type,
+		      const void *daddr, const void *saddr, unsigned len);
+extern int eth_rebuild_header(struct sk_buff *skb);
+extern int eth_header_parse(const struct sk_buff *skb, unsigned char *haddr);
+extern int eth_header_cache(const struct neighbour *neigh, struct hh_cache *hh, __be16 type);
+extern void eth_header_cache_update(struct hh_cache *hh,
+				    const struct net_device *dev,
+				    const unsigned char *haddr);
+extern int eth_mac_addr(struct net_device *dev, void *p);
+extern int eth_change_mtu(struct net_device *dev, int new_mtu);
+extern int eth_validate_addr(struct net_device *dev);
+
+
+
+extern struct net_device *alloc_etherdev_mqs(int sizeof_priv, unsigned int txqs,
+					    unsigned int rxqs);
+#define alloc_etherdev(sizeof_priv) alloc_etherdev_mq(sizeof_priv, 1)
+#define alloc_etherdev_mq(sizeof_priv, count) alloc_etherdev_mqs(sizeof_priv, count, count)
+
+/**
+ * is_zero_ether_addr - Determine if give Ethernet address is all zeros.
+ * @addr: Pointer to a six-byte array containing the Ethernet address
+ *
+ * Return true if the address is all zeroes.
+ */
+static inline int is_zero_ether_addr(const u8 *addr)
+{
+	return !(addr[0] | addr[1] | addr[2] | addr[3] | addr[4] | addr[5]);
+}
+
+/**
+ * is_multicast_ether_addr - Determine if the Ethernet address is a multicast.
+ * @addr: Pointer to a six-byte array containing the Ethernet address
+ *
+ * Return true if the address is a multicast address.
+ * By definition the broadcast address is also a multicast address.
+ */
+static inline int is_multicast_ether_addr(const u8 *addr)
+{
+	return 0x01 & addr[0];
+}
+
+/**
+ * is_local_ether_addr - Determine if the Ethernet address is locally-assigned one (IEEE 802).
+ * @addr: Pointer to a six-byte array containing the Ethernet address
+ *
+ * Return true if the address is a local address.
+ */
+static inline int is_local_ether_addr(const u8 *addr)
+{
+	return 0x02 & addr[0];
+}
+
+/**
+ * is_broadcast_ether_addr - Determine if the Ethernet address is broadcast
+ * @addr: Pointer to a six-byte array containing the Ethernet address
+ *
+ * Return true if the address is the broadcast address.
+ */
+static inline int is_broadcast_ether_addr(const u8 *addr)
+{
+	return (addr[0] & addr[1] & addr[2] & addr[3] & addr[4] & addr[5]) == 0xff;
+}
+
+/**
+ * is_unicast_ether_addr - Determine if the Ethernet address is unicast
+ * @addr: Pointer to a six-byte array containing the Ethernet address
+ *
+ * Return true if the address is a unicast address.
+ */
+static inline int is_unicast_ether_addr(const u8 *addr)
+{
+	return !is_multicast_ether_addr(addr);
+}
+
+/**
+ * is_valid_ether_addr - Determine if the given Ethernet address is valid
+ * @addr: Pointer to a six-byte array containing the Ethernet address
+ *
+ * Check that the Ethernet address (MAC) is not 00:00:00:00:00:00, is not
+ * a multicast address, and is not FF:FF:FF:FF:FF:FF.
+ *
+ * Return true if the address is valid.
+ */
+static inline int is_valid_ether_addr(const u8 *addr)
+{
+	/* FF:FF:FF:FF:FF:FF is a multicast address so we don't need to
+	 * explicitly check for it here. */
+	return !is_multicast_ether_addr(addr) && !is_zero_ether_addr(addr);
+}
+
+/**
+ * random_ether_addr - Generate software assigned random Ethernet address
+ * @addr: Pointer to a six-byte array containing the Ethernet address
+ *
+ * Generate a random Ethernet address (MAC) that is not multicast
+ * and has the local assigned bit set.
+ */
+static inline void random_ether_addr(u8 *addr)
+{
+	get_random_bytes (addr, ETH_ALEN);
+	addr [0] &= 0xfe;	/* clear multicast bit */
+	addr [0] |= 0x02;	/* set local assignment bit (IEEE802) */
+}
+
+/**
+ * eth_hw_addr_random - Generate software assigned random Ethernet and
+ * set device flag
+ * @dev: pointer to net_device structure
+ *
+ * Generate a random Ethernet address (MAC) to be used by a net device
+ * and set addr_assign_type so the state can be read by sysfs and be
+ * used by userspace.
+ */
+static inline void eth_hw_addr_random(struct net_device *dev)
+{
+	dev->addr_assign_type |= NET_ADDR_RANDOM;
+	random_ether_addr(dev->dev_addr);
+}
+
+/**
+ * compare_ether_addr - Compare two Ethernet addresses
+ * @addr1: Pointer to a six-byte array containing the Ethernet address
+ * @addr2: Pointer other six-byte array containing the Ethernet address
+ *
+ * Compare two ethernet addresses, returns 0 if equal, non-zero otherwise.
+ * Unlike memcmp(), it doesn't return a value suitable for sorting.
+ */
+static inline unsigned compare_ether_addr(const u8 *addr1, const u8 *addr2)
+{
+	const u16 *a = (const u16 *) addr1;
+	const u16 *b = (const u16 *) addr2;
+
+	BUILD_BUG_ON(ETH_ALEN != 6);
+	return ((a[0] ^ b[0]) | (a[1] ^ b[1]) | (a[2] ^ b[2])) != 0;
+}
+
+static inline unsigned long zap_last_2bytes(unsigned long value)
+{
+#ifdef __BIG_ENDIAN
+	return value >> 16;
+#else
+	return value << 16;
+#endif
+}
+
+/**
+ * compare_ether_addr_64bits - Compare two Ethernet addresses
+ * @addr1: Pointer to an array of 8 bytes
+ * @addr2: Pointer to an other array of 8 bytes
+ *
+ * Compare two ethernet addresses, returns 0 if equal, non-zero otherwise.
+ * Unlike memcmp(), it doesn't return a value suitable for sorting.
+ * The function doesn't need any conditional branches and possibly uses
+ * word memory accesses on CPU allowing cheap unaligned memory reads.
+ * arrays = { byte1, byte2, byte3, byte4, byte6, byte7, pad1, pad2}
+ *
+ * Please note that alignment of addr1 & addr2 is only guaranted to be 16 bits.
+ */
+
+static inline unsigned compare_ether_addr_64bits(const u8 addr1[6+2],
+						 const u8 addr2[6+2])
+{
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+	unsigned long fold = ((*(unsigned long *)addr1) ^
+			      (*(unsigned long *)addr2));
+
+	if (sizeof(fold) == 8)
+		return zap_last_2bytes(fold) != 0;
+
+	fold |= zap_last_2bytes((*(unsigned long *)(addr1 + 4)) ^
+				(*(unsigned long *)(addr2 + 4)));
+	return fold != 0;
+#else
+	return compare_ether_addr(addr1, addr2);
+#endif
+}
+
+/**
+ * is_etherdev_addr - Tell if given Ethernet address belongs to the device.
+ * @dev: Pointer to a device structure
+ * @addr: Pointer to a six-byte array containing the Ethernet address
+ *
+ * Compare passed address with all addresses of the device. Return true if the
+ * address if one of the device addresses.
+ *
+ * Note that this function calls compare_ether_addr_64bits() so take care of
+ * the right padding.
+ */
+static inline bool is_etherdev_addr(const struct net_device *dev,
+				    const u8 addr[6 + 2])
+{
+	struct netdev_hw_addr *ha;
+	int res = 1;
+
+	rcu_read_lock();
+	for_each_dev_addr(dev, ha) {
+		res = compare_ether_addr_64bits(addr, ha->addr);
+		if (!res)
+			break;
+	}
+	rcu_read_unlock();
+	return !res;
+}
+#endif	/* __KERNEL__ */
+
+/**
+ * compare_ether_header - Compare two Ethernet headers
+ * @a: Pointer to Ethernet header
+ * @b: Pointer to Ethernet header
+ *
+ * Compare two ethernet headers, returns 0 if equal.
+ * This assumes that the network header (i.e., IP header) is 4-byte
+ * aligned OR the platform can handle unaligned access.  This is the
+ * case for all packets coming into netif_receive_skb or similar
+ * entry points.
+ */
+
+static inline unsigned long compare_ether_header(const void *a, const void *b)
+{
+#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) && BITS_PER_LONG == 64
+	unsigned long fold;
+
+	/*
+	 * We want to compare 14 bytes:
+	 *  [a0 ... a13] ^ [b0 ... b13]
+	 * Use two long XOR, ORed together, with an overlap of two bytes.
+	 *  [a0  a1  a2  a3  a4  a5  a6  a7 ] ^ [b0  b1  b2  b3  b4  b5  b6  b7 ] |
+	 *  [a6  a7  a8  a9  a10 a11 a12 a13] ^ [b6  b7  b8  b9  b10 b11 b12 b13]
+	 * This means the [a6 a7] ^ [b6 b7] part is done two times.
+	*/
+	fold = *(unsigned long *)a ^ *(unsigned long *)b;
+	fold |= *(unsigned long *)(a + 6) ^ *(unsigned long *)(b + 6);
+	return fold;
+#else
+	u32 *a32 = (u32 *)((u8 *)a + 2);
+	u32 *b32 = (u32 *)((u8 *)b + 2);
+
+	return (*(u16 *)a ^ *(u16 *)b) | (a32[0] ^ b32[0]) |
+	       (a32[1] ^ b32[1]) | (a32[2] ^ b32[2]);
+#endif
+}
+
+#endif	/* _LINUX_ETHERDEVICE_H */
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
new file mode 100644
index 00000000..f5647b59
--- /dev/null
+++ b/include/linux/ethtool.h
@@ -0,0 +1,1210 @@
+/*
+ * ethtool.h: Defines for Linux ethtool.
+ *
+ * Copyright (C) 1998 David S. Miller (davem@redhat.com)
+ * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
+ * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
+ * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
+ *                                christopher.leech@intel.com,
+ *                                scott.feldman@intel.com)
+ * Portions Copyright (C) Sun Microsystems 2008
+ */
+
+#ifndef _LINUX_ETHTOOL_H
+#define _LINUX_ETHTOOL_H
+
+#ifdef __KERNEL__
+#include <linux/compat.h>
+#endif
+#include <linux/types.h>
+#include <linux/if_ether.h>
+
+/* This should work for both 32 and 64 bit userland. */
+struct ethtool_cmd {
+	__u32	cmd;
+	__u32	supported;	/* Features this interface supports */
+	__u32	advertising;	/* Features this interface advertises */
+	__u16	speed;	        /* The forced speed (lower bits) in
+				 * Mbps. Please use
+				 * ethtool_cmd_speed()/_set() to
+				 * access it */
+	__u8	duplex;		/* Duplex, half or full */
+	__u8	port;		/* Which connector port */
+	__u8	phy_address;	/* MDIO PHY address (PRTAD for clause 45).
+				 * May be read-only or read-write
+				 * depending on the driver.
+				 */
+	__u8	transceiver;	/* Which transceiver to use */
+	__u8	autoneg;	/* Enable or disable autonegotiation */
+	__u8	mdio_support;	/* MDIO protocols supported.  Read-only.
+				 * Not set by all drivers.
+				 */
+	__u32	maxtxpkt;	/* Tx pkts before generating tx int */
+	__u32	maxrxpkt;	/* Rx pkts before generating rx int */
+	__u16	speed_hi;       /* The forced speed (upper
+				 * bits) in Mbps. Please use
+				 * ethtool_cmd_speed()/_set() to
+				 * access it */
+	__u8	eth_tp_mdix;
+	__u8	reserved2;
+	__u32	lp_advertising;	/* Features the link partner advertises */
+	__u32	reserved[2];
+};
+
+static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
+					 __u32 speed)
+{
+
+	ep->speed = (__u16)speed;
+	ep->speed_hi = (__u16)(speed >> 16);
+}
+
+static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep)
+{
+	return (ep->speed_hi << 16) | ep->speed;
+}
+
+/* Device supports clause 22 register access to PHY or peripherals
+ * using the interface defined in <linux/mii.h>.  This should not be
+ * set if there are known to be no such peripherals present or if
+ * the driver only emulates clause 22 registers for compatibility.
+ */
+#define ETH_MDIO_SUPPORTS_C22	1
+
+/* Device supports clause 45 register access to PHY or peripherals
+ * using the interface defined in <linux/mii.h> and <linux/mdio.h>.
+ * This should not be set if there are known to be no such peripherals
+ * present.
+ */
+#define ETH_MDIO_SUPPORTS_C45	2
+
+#define ETHTOOL_FWVERS_LEN	32
+#define ETHTOOL_BUSINFO_LEN	32
+/* these strings are set to whatever the driver author decides... */
+struct ethtool_drvinfo {
+	__u32	cmd;
+	char	driver[32];	/* driver short name, "tulip", "eepro100" */
+	char	version[32];	/* driver version string */
+	char	fw_version[ETHTOOL_FWVERS_LEN];	/* firmware version string */
+	char	bus_info[ETHTOOL_BUSINFO_LEN];	/* Bus info for this IF. */
+				/* For PCI devices, use pci_name(pci_dev). */
+	char	reserved1[32];
+	char	reserved2[12];
+				/*
+				 * Some struct members below are filled in
+				 * using ops->get_sset_count().  Obtaining
+				 * this info from ethtool_drvinfo is now
+				 * deprecated; Use ETHTOOL_GSSET_INFO
+				 * instead.
+				 */
+	__u32	n_priv_flags;	/* number of flags valid in ETHTOOL_GPFLAGS */
+	__u32	n_stats;	/* number of u64's from ETHTOOL_GSTATS */
+	__u32	testinfo_len;
+	__u32	eedump_len;	/* Size of data from ETHTOOL_GEEPROM (bytes) */
+	__u32	regdump_len;	/* Size of data from ETHTOOL_GREGS (bytes) */
+};
+
+#define SOPASS_MAX	6
+/* wake-on-lan settings */
+struct ethtool_wolinfo {
+	__u32	cmd;
+	__u32	supported;
+	__u32	wolopts;
+	__u8	sopass[SOPASS_MAX]; /* SecureOn(tm) password */
+};
+
+/* for passing single values */
+struct ethtool_value {
+	__u32	cmd;
+	__u32	data;
+};
+
+/* for passing big chunks of data */
+struct ethtool_regs {
+	__u32	cmd;
+	__u32	version; /* driver-specific, indicates different chips/revs */
+	__u32	len; /* bytes */
+	__u8	data[0];
+};
+
+/* for passing EEPROM chunks */
+struct ethtool_eeprom {
+	__u32	cmd;
+	__u32	magic;
+	__u32	offset; /* in bytes */
+	__u32	len; /* in bytes */
+	__u8	data[0];
+};
+
+/**
+ * struct ethtool_coalesce - coalescing parameters for IRQs and stats updates
+ * @cmd: ETHTOOL_{G,S}COALESCE
+ * @rx_coalesce_usecs: How many usecs to delay an RX interrupt after
+ *	a packet arrives.
+ * @rx_max_coalesced_frames: Maximum number of packets to receive
+ *	before an RX interrupt.
+ * @rx_coalesce_usecs_irq: Same as @rx_coalesce_usecs, except that
+ *	this value applies while an IRQ is being serviced by the host.
+ * @rx_max_coalesced_frames_irq: Same as @rx_max_coalesced_frames,
+ *	except that this value applies while an IRQ is being serviced
+ *	by the host.
+ * @tx_coalesce_usecs: How many usecs to delay a TX interrupt after
+ *	a packet is sent.
+ * @tx_max_coalesced_frames: Maximum number of packets to be sent
+ *	before a TX interrupt.
+ * @tx_coalesce_usecs_irq: Same as @tx_coalesce_usecs, except that
+ *	this value applies while an IRQ is being serviced by the host.
+ * @tx_max_coalesced_frames_irq: Same as @tx_max_coalesced_frames,
+ *	except that this value applies while an IRQ is being serviced
+ *	by the host.
+ * @stats_block_coalesce_usecs: How many usecs to delay in-memory
+ *	statistics block updates.  Some drivers do not have an
+ *	in-memory statistic block, and in such cases this value is
+ *	ignored.  This value must not be zero.
+ * @use_adaptive_rx_coalesce: Enable adaptive RX coalescing.
+ * @use_adaptive_tx_coalesce: Enable adaptive TX coalescing.
+ * @pkt_rate_low: Threshold for low packet rate (packets per second).
+ * @rx_coalesce_usecs_low: How many usecs to delay an RX interrupt after
+ *	a packet arrives, when the packet rate is below @pkt_rate_low.
+ * @rx_max_coalesced_frames_low: Maximum number of packets to be received
+ *	before an RX interrupt, when the packet rate is below @pkt_rate_low.
+ * @tx_coalesce_usecs_low: How many usecs to delay a TX interrupt after
+ *	a packet is sent, when the packet rate is below @pkt_rate_low.
+ * @tx_max_coalesced_frames_low: Maximum nuumber of packets to be sent before
+ *	a TX interrupt, when the packet rate is below @pkt_rate_low.
+ * @pkt_rate_high: Threshold for high packet rate (packets per second).
+ * @rx_coalesce_usecs_high: How many usecs to delay an RX interrupt after
+ *	a packet arrives, when the packet rate is above @pkt_rate_high.
+ * @rx_max_coalesced_frames_high: Maximum number of packets to be received
+ *	before an RX interrupt, when the packet rate is above @pkt_rate_high.
+ * @tx_coalesce_usecs_high: How many usecs to delay a TX interrupt after
+ *	a packet is sent, when the packet rate is above @pkt_rate_high.
+ * @tx_max_coalesced_frames_high: Maximum number of packets to be sent before
+ *	a TX interrupt, when the packet rate is above @pkt_rate_high.
+ * @rate_sample_interval: How often to do adaptive coalescing packet rate
+ *	sampling, measured in seconds.  Must not be zero.
+ *
+ * Each pair of (usecs, max_frames) fields specifies this exit
+ * condition for interrupt coalescing:
+ *	(usecs > 0 && time_since_first_completion >= usecs) ||
+ *	(max_frames > 0 && completed_frames >= max_frames)
+ * It is illegal to set both usecs and max_frames to zero as this
+ * would cause interrupts to never be generated.  To disable
+ * coalescing, set usecs = 0 and max_frames = 1.
+ *
+ * Some implementations ignore the value of max_frames and use the
+ * condition:
+ *	time_since_first_completion >= usecs
+ * This is deprecated.  Drivers for hardware that does not support
+ * counting completions should validate that max_frames == !rx_usecs.
+ *
+ * Adaptive RX/TX coalescing is an algorithm implemented by some
+ * drivers to improve latency under low packet rates and improve
+ * throughput under high packet rates.  Some drivers only implement
+ * one of RX or TX adaptive coalescing.  Anything not implemented by
+ * the driver causes these values to be silently ignored.
+ *
+ * When the packet rate is below @pkt_rate_high but above
+ * @pkt_rate_low (both measured in packets per second) the
+ * normal {rx,tx}_* coalescing parameters are used.
+ */
+struct ethtool_coalesce {
+	__u32	cmd;
+	__u32	rx_coalesce_usecs;
+	__u32	rx_max_coalesced_frames;
+	__u32	rx_coalesce_usecs_irq;
+	__u32	rx_max_coalesced_frames_irq;
+	__u32	tx_coalesce_usecs;
+	__u32	tx_max_coalesced_frames;
+	__u32	tx_coalesce_usecs_irq;
+	__u32	tx_max_coalesced_frames_irq;
+	__u32	stats_block_coalesce_usecs;
+	__u32	use_adaptive_rx_coalesce;
+	__u32	use_adaptive_tx_coalesce;
+	__u32	pkt_rate_low;
+	__u32	rx_coalesce_usecs_low;
+	__u32	rx_max_coalesced_frames_low;
+	__u32	tx_coalesce_usecs_low;
+	__u32	tx_max_coalesced_frames_low;
+	__u32	pkt_rate_high;
+	__u32	rx_coalesce_usecs_high;
+	__u32	rx_max_coalesced_frames_high;
+	__u32	tx_coalesce_usecs_high;
+	__u32	tx_max_coalesced_frames_high;
+	__u32	rate_sample_interval;
+};
+
+/* for configuring RX/TX ring parameters */
+struct ethtool_ringparam {
+	__u32	cmd;	/* ETHTOOL_{G,S}RINGPARAM */
+
+	/* Read only attributes.  These indicate the maximum number
+	 * of pending RX/TX ring entries the driver will allow the
+	 * user to set.
+	 */
+	__u32	rx_max_pending;
+	__u32	rx_mini_max_pending;
+	__u32	rx_jumbo_max_pending;
+	__u32	tx_max_pending;
+
+	/* Values changeable by the user.  The valid values are
+	 * in the range 1 to the "*_max_pending" counterpart above.
+	 */
+	__u32	rx_pending;
+	__u32	rx_mini_pending;
+	__u32	rx_jumbo_pending;
+	__u32	tx_pending;
+};
+
+/**
+ * struct ethtool_channels - configuring number of network channel
+ * @cmd: ETHTOOL_{G,S}CHANNELS
+ * @max_rx: Read only. Maximum number of receive channel the driver support.
+ * @max_tx: Read only. Maximum number of transmit channel the driver support.
+ * @max_other: Read only. Maximum number of other channel the driver support.
+ * @max_combined: Read only. Maximum number of combined channel the driver
+ *	support. Set of queues RX, TX or other.
+ * @rx_count: Valid values are in the range 1 to the max_rx.
+ * @tx_count: Valid values are in the range 1 to the max_tx.
+ * @other_count: Valid values are in the range 1 to the max_other.
+ * @combined_count: Valid values are in the range 1 to the max_combined.
+ *
+ * This can be used to configure RX, TX and other channels.
+ */
+
+struct ethtool_channels {
+	__u32	cmd;
+	__u32	max_rx;
+	__u32	max_tx;
+	__u32	max_other;
+	__u32	max_combined;
+	__u32	rx_count;
+	__u32	tx_count;
+	__u32	other_count;
+	__u32	combined_count;
+};
+
+/* for configuring link flow control parameters */
+struct ethtool_pauseparam {
+	__u32	cmd;	/* ETHTOOL_{G,S}PAUSEPARAM */
+
+	/* If the link is being auto-negotiated (via ethtool_cmd.autoneg
+	 * being true) the user may set 'autoneg' here non-zero to have the
+	 * pause parameters be auto-negotiated too.  In such a case, the
+	 * {rx,tx}_pause values below determine what capabilities are
+	 * advertised.
+	 *
+	 * If 'autoneg' is zero or the link is not being auto-negotiated,
+	 * then {rx,tx}_pause force the driver to use/not-use pause
+	 * flow control.
+	 */
+	__u32	autoneg;
+	__u32	rx_pause;
+	__u32	tx_pause;
+};
+
+#define ETH_GSTRING_LEN		32
+enum ethtool_stringset {
+	ETH_SS_TEST		= 0,
+	ETH_SS_STATS,
+	ETH_SS_PRIV_FLAGS,
+	ETH_SS_NTUPLE_FILTERS,	/* Do not use, GRXNTUPLE is now deprecated */
+	ETH_SS_FEATURES,
+};
+
+/* for passing string sets for data tagging */
+struct ethtool_gstrings {
+	__u32	cmd;		/* ETHTOOL_GSTRINGS */
+	__u32	string_set;	/* string set id e.c. ETH_SS_TEST, etc*/
+	__u32	len;		/* number of strings in the string set */
+	__u8	data[0];
+};
+
+struct ethtool_sset_info {
+	__u32	cmd;		/* ETHTOOL_GSSET_INFO */
+	__u32	reserved;
+	__u64	sset_mask;	/* input: each bit selects an sset to query */
+				/* output: each bit a returned sset */
+	__u32	data[0];	/* ETH_SS_xxx count, in order, based on bits
+				   in sset_mask.  One bit implies one
+				   __u32, two bits implies two
+				   __u32's, etc. */
+};
+
+/**
+ * enum ethtool_test_flags - flags definition of ethtool_test
+ * @ETH_TEST_FL_OFFLINE: if set perform online and offline tests, otherwise
+ *	only online tests.
+ * @ETH_TEST_FL_FAILED: Driver set this flag if test fails.
+ * @ETH_TEST_FL_EXTERNAL_LB: Application request to perform external loopback
+ *	test.
+ * @ETH_TEST_FL_EXTERNAL_LB_DONE: Driver performed the external loopback test
+ */
+
+enum ethtool_test_flags {
+	ETH_TEST_FL_OFFLINE	= (1 << 0),
+	ETH_TEST_FL_FAILED	= (1 << 1),
+	ETH_TEST_FL_EXTERNAL_LB	= (1 << 2),
+	ETH_TEST_FL_EXTERNAL_LB_DONE	= (1 << 3),
+};
+
+/* for requesting NIC test and getting results*/
+struct ethtool_test {
+	__u32	cmd;		/* ETHTOOL_TEST */
+	__u32	flags;		/* ETH_TEST_FL_xxx */
+	__u32	reserved;
+	__u32	len;		/* result length, in number of u64 elements */
+	__u64	data[0];
+};
+
+/* for dumping NIC-specific statistics */
+struct ethtool_stats {
+	__u32	cmd;		/* ETHTOOL_GSTATS */
+	__u32	n_stats;	/* number of u64's being returned */
+	__u64	data[0];
+};
+
+struct ethtool_perm_addr {
+	__u32	cmd;		/* ETHTOOL_GPERMADDR */
+	__u32	size;
+	__u8	data[0];
+};
+
+/* boolean flags controlling per-interface behavior characteristics.
+ * When reading, the flag indicates whether or not a certain behavior
+ * is enabled/present.  When writing, the flag indicates whether
+ * or not the driver should turn on (set) or off (clear) a behavior.
+ *
+ * Some behaviors may read-only (unconditionally absent or present).
+ * If such is the case, return EINVAL in the set-flags operation if the
+ * flag differs from the read-only value.
+ */
+enum ethtool_flags {
+	ETH_FLAG_TXVLAN		= (1 << 7),	/* TX VLAN offload enabled */
+	ETH_FLAG_RXVLAN		= (1 << 8),	/* RX VLAN offload enabled */
+	ETH_FLAG_LRO		= (1 << 15),	/* LRO is enabled */
+	ETH_FLAG_NTUPLE		= (1 << 27),	/* N-tuple filters enabled */
+	ETH_FLAG_RXHASH		= (1 << 28),
+};
+
+/* The following structures are for supporting RX network flow
+ * classification and RX n-tuple configuration. Note, all multibyte
+ * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to
+ * be in network byte order.
+ */
+
+/**
+ * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc.
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @psrc: Source port
+ * @pdst: Destination port
+ * @tos: Type-of-service
+ *
+ * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow.
+ */
+struct ethtool_tcpip4_spec {
+	__be32	ip4src;
+	__be32	ip4dst;
+	__be16	psrc;
+	__be16	pdst;
+	__u8    tos;
+};
+
+/**
+ * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @spi: Security parameters index
+ * @tos: Type-of-service
+ *
+ * This can be used to specify an IPsec transport or tunnel over IPv4.
+ */
+struct ethtool_ah_espip4_spec {
+	__be32	ip4src;
+	__be32	ip4dst;
+	__be32	spi;
+	__u8    tos;
+};
+
+#define	ETH_RX_NFC_IP4	1
+
+/**
+ * struct ethtool_usrip4_spec - general flow specification for IPv4
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @l4_4_bytes: First 4 bytes of transport (layer 4) header
+ * @tos: Type-of-service
+ * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0
+ * @proto: Transport protocol number; mask must be 0
+ */
+struct ethtool_usrip4_spec {
+	__be32	ip4src;
+	__be32	ip4dst;
+	__be32	l4_4_bytes;
+	__u8    tos;
+	__u8    ip_ver;
+	__u8    proto;
+};
+
+union ethtool_flow_union {
+	struct ethtool_tcpip4_spec		tcp_ip4_spec;
+	struct ethtool_tcpip4_spec		udp_ip4_spec;
+	struct ethtool_tcpip4_spec		sctp_ip4_spec;
+	struct ethtool_ah_espip4_spec		ah_ip4_spec;
+	struct ethtool_ah_espip4_spec		esp_ip4_spec;
+	struct ethtool_usrip4_spec		usr_ip4_spec;
+	struct ethhdr				ether_spec;
+	__u8					hdata[60];
+};
+
+struct ethtool_flow_ext {
+	__be16	vlan_etype;
+	__be16	vlan_tci;
+	__be32	data[2];
+};
+
+/**
+ * struct ethtool_rx_flow_spec - classification rule for RX flows
+ * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
+ * @h_u: Flow fields to match (dependent on @flow_type)
+ * @h_ext: Additional fields to match
+ * @m_u: Masks for flow field bits to be matched
+ * @m_ext: Masks for additional field bits to be matched
+ *	Note, all additional fields must be ignored unless @flow_type
+ *	includes the %FLOW_EXT flag.
+ * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC
+ *	if packets should be discarded
+ * @location: Location of rule in the table.  Locations must be
+ *	numbered such that a flow matching multiple rules will be
+ *	classified according to the first (lowest numbered) rule.
+ */
+struct ethtool_rx_flow_spec {
+	__u32		flow_type;
+	union ethtool_flow_union h_u;
+	struct ethtool_flow_ext h_ext;
+	union ethtool_flow_union m_u;
+	struct ethtool_flow_ext m_ext;
+	__u64		ring_cookie;
+	__u32		location;
+};
+
+/**
+ * struct ethtool_rxnfc - command to get or set RX flow classification rules
+ * @cmd: Specific command number - %ETHTOOL_GRXFH, %ETHTOOL_SRXFH,
+ *	%ETHTOOL_GRXRINGS, %ETHTOOL_GRXCLSRLCNT, %ETHTOOL_GRXCLSRULE,
+ *	%ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS
+ * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW
+ * @data: Command-dependent value
+ * @fs: Flow classification rule
+ * @rule_cnt: Number of rules to be affected
+ * @rule_locs: Array of used rule locations
+ *
+ * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating
+ * the fields included in the flow hash, e.g. %RXH_IP_SRC.  The following
+ * structure fields must not be used.
+ *
+ * For %ETHTOOL_GRXRINGS, @data is set to the number of RX rings/queues
+ * on return.
+ *
+ * For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined
+ * rules on return.  If @data is non-zero on return then it is the
+ * size of the rule table, plus the flag %RX_CLS_LOC_SPECIAL if the
+ * driver supports any special location values.  If that flag is not
+ * set in @data then special location values should not be used.
+ *
+ * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the location of an
+ * existing rule on entry and @fs contains the rule on return.
+ *
+ * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the
+ * user buffer for @rule_locs on entry.  On return, @data is the size
+ * of the rule table, @rule_cnt is the number of defined rules, and
+ * @rule_locs contains the locations of the defined rules.  Drivers
+ * must use the second parameter to get_rxnfc() instead of @rule_locs.
+ *
+ * For %ETHTOOL_SRXCLSRLINS, @fs specifies the rule to add or update.
+ * @fs.@location either specifies the location to use or is a special
+ * location value with %RX_CLS_LOC_SPECIAL flag set.  On return,
+ * @fs.@location is the actual rule location.
+ *
+ * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the location of an
+ * existing rule on entry.
+ *
+ * A driver supporting the special location values for
+ * %ETHTOOL_SRXCLSRLINS may add the rule at any suitable unused
+ * location, and may remove a rule at a later location (lower
+ * priority) that matches exactly the same set of flows.  The special
+ * values are: %RX_CLS_LOC_ANY, selecting any location;
+ * %RX_CLS_LOC_FIRST, selecting the first suitable location (maximum
+ * priority); and %RX_CLS_LOC_LAST, selecting the last suitable
+ * location (minimum priority).  Additional special values may be
+ * defined in future and drivers must return -%EINVAL for any
+ * unrecognised value.
+ */
+struct ethtool_rxnfc {
+	__u32				cmd;
+	__u32				flow_type;
+	__u64				data;
+	struct ethtool_rx_flow_spec	fs;
+	__u32				rule_cnt;
+	__u32				rule_locs[0];
+};
+
+#ifdef __KERNEL__
+#ifdef CONFIG_COMPAT
+
+struct compat_ethtool_rx_flow_spec {
+	u32		flow_type;
+	union ethtool_flow_union h_u;
+	struct ethtool_flow_ext h_ext;
+	union ethtool_flow_union m_u;
+	struct ethtool_flow_ext m_ext;
+	compat_u64	ring_cookie;
+	u32		location;
+};
+
+struct compat_ethtool_rxnfc {
+	u32				cmd;
+	u32				flow_type;
+	compat_u64			data;
+	struct compat_ethtool_rx_flow_spec fs;
+	u32				rule_cnt;
+	u32				rule_locs[0];
+};
+
+#endif /* CONFIG_COMPAT */
+#endif /* __KERNEL__ */
+
+/**
+ * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection
+ * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR
+ * @size: On entry, the array size of the user buffer, which may be zero.
+ *	On return from %ETHTOOL_GRXFHINDIR, the array size of the hardware
+ *	indirection table.
+ * @ring_index: RX ring/queue index for each hash value
+ *
+ * For %ETHTOOL_GRXFHINDIR, a @size of zero means that only the size
+ * should be returned.  For %ETHTOOL_SRXFHINDIR, a @size of zero means
+ * the table should be reset to default values.  This last feature
+ * is not supported by the original implementations.
+ */
+struct ethtool_rxfh_indir {
+	__u32	cmd;
+	__u32	size;
+	__u32	ring_index[0];
+};
+
+/**
+ * struct ethtool_rx_ntuple_flow_spec - specification for RX flow filter
+ * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
+ * @h_u: Flow field values to match (dependent on @flow_type)
+ * @m_u: Masks for flow field value bits to be ignored
+ * @vlan_tag: VLAN tag to match
+ * @vlan_tag_mask: Mask for VLAN tag bits to be ignored
+ * @data: Driver-dependent data to match
+ * @data_mask: Mask for driver-dependent data bits to be ignored
+ * @action: RX ring/queue index to deliver to (non-negative) or other action
+ *	(negative, e.g. %ETHTOOL_RXNTUPLE_ACTION_DROP)
+ *
+ * For flow types %TCP_V4_FLOW, %UDP_V4_FLOW and %SCTP_V4_FLOW, where
+ * a field value and mask are both zero this is treated as if all mask
+ * bits are set i.e. the field is ignored.
+ */
+struct ethtool_rx_ntuple_flow_spec {
+	__u32		 flow_type;
+	union {
+		struct ethtool_tcpip4_spec		tcp_ip4_spec;
+		struct ethtool_tcpip4_spec		udp_ip4_spec;
+		struct ethtool_tcpip4_spec		sctp_ip4_spec;
+		struct ethtool_ah_espip4_spec		ah_ip4_spec;
+		struct ethtool_ah_espip4_spec		esp_ip4_spec;
+		struct ethtool_usrip4_spec		usr_ip4_spec;
+		struct ethhdr				ether_spec;
+		__u8					hdata[72];
+	} h_u, m_u;
+
+	__u16	        vlan_tag;
+	__u16	        vlan_tag_mask;
+	__u64		data;
+	__u64		data_mask;
+
+	__s32		action;
+#define ETHTOOL_RXNTUPLE_ACTION_DROP	(-1)	/* drop packet */
+#define ETHTOOL_RXNTUPLE_ACTION_CLEAR	(-2)	/* clear filter */
+};
+
+/**
+ * struct ethtool_rx_ntuple - command to set or clear RX flow filter
+ * @cmd: Command number - %ETHTOOL_SRXNTUPLE
+ * @fs: Flow filter specification
+ */
+struct ethtool_rx_ntuple {
+	__u32					cmd;
+	struct ethtool_rx_ntuple_flow_spec	fs;
+};
+
+#define ETHTOOL_FLASH_MAX_FILENAME	128
+enum ethtool_flash_op_type {
+	ETHTOOL_FLASH_ALL_REGIONS	= 0,
+};
+
+/* for passing firmware flashing related parameters */
+struct ethtool_flash {
+	__u32	cmd;
+	__u32	region;
+	char	data[ETHTOOL_FLASH_MAX_FILENAME];
+};
+
+/**
+ * struct ethtool_dump - used for retrieving, setting device dump
+ * @cmd: Command number - %ETHTOOL_GET_DUMP_FLAG, %ETHTOOL_GET_DUMP_DATA, or
+ * 	%ETHTOOL_SET_DUMP
+ * @version: FW version of the dump, filled in by driver
+ * @flag: driver dependent flag for dump setting, filled in by driver during
+ * 	  get and filled in by ethtool for set operation
+ * @len: length of dump data, used as the length of the user buffer on entry to
+ * 	 %ETHTOOL_GET_DUMP_DATA and this is returned as dump length by driver
+ * 	 for %ETHTOOL_GET_DUMP_FLAG command
+ * @data: data collected for get dump data operation
+ */
+struct ethtool_dump {
+	__u32	cmd;
+	__u32	version;
+	__u32	flag;
+	__u32	len;
+	__u8	data[0];
+};
+
+/* for returning and changing feature sets */
+
+/**
+ * struct ethtool_get_features_block - block with state of 32 features
+ * @available: mask of changeable features
+ * @requested: mask of features requested to be enabled if possible
+ * @active: mask of currently enabled features
+ * @never_changed: mask of features not changeable for any device
+ */
+struct ethtool_get_features_block {
+	__u32	available;
+	__u32	requested;
+	__u32	active;
+	__u32	never_changed;
+};
+
+/**
+ * struct ethtool_gfeatures - command to get state of device's features
+ * @cmd: command number = %ETHTOOL_GFEATURES
+ * @size: in: number of elements in the features[] array;
+ *       out: number of elements in features[] needed to hold all features
+ * @features: state of features
+ */
+struct ethtool_gfeatures {
+	__u32	cmd;
+	__u32	size;
+	struct ethtool_get_features_block features[0];
+};
+
+/**
+ * struct ethtool_set_features_block - block with request for 32 features
+ * @valid: mask of features to be changed
+ * @requested: values of features to be changed
+ */
+struct ethtool_set_features_block {
+	__u32	valid;
+	__u32	requested;
+};
+
+/**
+ * struct ethtool_sfeatures - command to request change in device's features
+ * @cmd: command number = %ETHTOOL_SFEATURES
+ * @size: array size of the features[] array
+ * @features: feature change masks
+ */
+struct ethtool_sfeatures {
+	__u32	cmd;
+	__u32	size;
+	struct ethtool_set_features_block features[0];
+};
+
+/*
+ * %ETHTOOL_SFEATURES changes features present in features[].valid to the
+ * values of corresponding bits in features[].requested. Bits in .requested
+ * not set in .valid or not changeable are ignored.
+ *
+ * Returns %EINVAL when .valid contains undefined or never-changeable bits
+ * or size is not equal to required number of features words (32-bit blocks).
+ * Returns >= 0 if request was completed; bits set in the value mean:
+ *   %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not
+ *	changeable (not present in %ETHTOOL_GFEATURES' features[].available)
+ *	those bits were ignored.
+ *   %ETHTOOL_F_WISH - some or all changes requested were recorded but the
+ *      resulting state of bits masked by .valid is not equal to .requested.
+ *      Probably there are other device-specific constraints on some features
+ *      in the set. When %ETHTOOL_F_UNSUPPORTED is set, .valid is considered
+ *      here as though ignored bits were cleared.
+ *   %ETHTOOL_F_COMPAT - some or all changes requested were made by calling
+ *      compatibility functions. Requested offload state cannot be properly
+ *      managed by kernel.
+ *
+ * Meaning of bits in the masks are obtained by %ETHTOOL_GSSET_INFO (number of
+ * bits in the arrays - always multiple of 32) and %ETHTOOL_GSTRINGS commands
+ * for ETH_SS_FEATURES string set. First entry in the table corresponds to least
+ * significant bit in features[0] fields. Empty strings mark undefined features.
+ */
+enum ethtool_sfeatures_retval_bits {
+	ETHTOOL_F_UNSUPPORTED__BIT,
+	ETHTOOL_F_WISH__BIT,
+	ETHTOOL_F_COMPAT__BIT,
+};
+
+#define ETHTOOL_F_UNSUPPORTED   (1 << ETHTOOL_F_UNSUPPORTED__BIT)
+#define ETHTOOL_F_WISH          (1 << ETHTOOL_F_WISH__BIT)
+#define ETHTOOL_F_COMPAT        (1 << ETHTOOL_F_COMPAT__BIT)
+
+#ifdef __KERNEL__
+
+#include <linux/rculist.h>
+
+extern int __ethtool_get_settings(struct net_device *dev,
+				  struct ethtool_cmd *cmd);
+
+/**
+ * enum ethtool_phys_id_state - indicator state for physical identification
+ * @ETHTOOL_ID_INACTIVE: Physical ID indicator should be deactivated
+ * @ETHTOOL_ID_ACTIVE: Physical ID indicator should be activated
+ * @ETHTOOL_ID_ON: LED should be turned on (used iff %ETHTOOL_ID_ACTIVE
+ *	is not supported)
+ * @ETHTOOL_ID_OFF: LED should be turned off (used iff %ETHTOOL_ID_ACTIVE
+ *	is not supported)
+ */
+enum ethtool_phys_id_state {
+	ETHTOOL_ID_INACTIVE,
+	ETHTOOL_ID_ACTIVE,
+	ETHTOOL_ID_ON,
+	ETHTOOL_ID_OFF
+};
+
+struct net_device;
+
+/* Some generic methods drivers may use in their ethtool_ops */
+u32 ethtool_op_get_link(struct net_device *dev);
+
+/**
+ * ethtool_rxfh_indir_default - get default value for RX flow hash indirection
+ * @index: Index in RX flow hash indirection table
+ * @n_rx_rings: Number of RX rings to use
+ *
+ * This function provides the default policy for RX flow hash indirection.
+ */
+static inline u32 ethtool_rxfh_indir_default(u32 index, u32 n_rx_rings)
+{
+	return index % n_rx_rings;
+}
+
+/**
+ * struct ethtool_ops - optional netdev operations
+ * @get_settings: Get various device settings including Ethernet link
+ *	settings. The @cmd parameter is expected to have been cleared
+ *	before get_settings is called. Returns a negative error code or
+ *	zero.
+ * @set_settings: Set various device settings including Ethernet link
+ *	settings.  Returns a negative error code or zero.
+ * @get_drvinfo: Report driver/device information.  Should only set the
+ *	@driver, @version, @fw_version and @bus_info fields.  If not
+ *	implemented, the @driver and @bus_info fields will be filled in
+ *	according to the netdev's parent device.
+ * @get_regs_len: Get buffer length required for @get_regs
+ * @get_regs: Get device registers
+ * @get_wol: Report whether Wake-on-Lan is enabled
+ * @set_wol: Turn Wake-on-Lan on or off.  Returns a negative error code
+ *	or zero.
+ * @get_msglevel: Report driver message level.  This should be the value
+ *	of the @msg_enable field used by netif logging functions.
+ * @set_msglevel: Set driver message level
+ * @nway_reset: Restart autonegotiation.  Returns a negative error code
+ *	or zero.
+ * @get_link: Report whether physical link is up.  Will only be called if
+ *	the netdev is up.  Should usually be set to ethtool_op_get_link(),
+ *	which uses netif_carrier_ok().
+ * @get_eeprom: Read data from the device EEPROM.
+ *	Should fill in the magic field.  Don't need to check len for zero
+ *	or wraparound.  Fill in the data argument with the eeprom values
+ *	from offset to offset + len.  Update len to the amount read.
+ *	Returns an error or zero.
+ * @set_eeprom: Write data to the device EEPROM.
+ *	Should validate the magic field.  Don't need to check len for zero
+ *	or wraparound.  Update len to the amount written.  Returns an error
+ *	or zero.
+ * @get_coalesce: Get interrupt coalescing parameters.  Returns a negative
+ *	error code or zero.
+ * @set_coalesce: Set interrupt coalescing parameters.  Returns a negative
+ *	error code or zero.
+ * @get_ringparam: Report ring sizes
+ * @set_ringparam: Set ring sizes.  Returns a negative error code or zero.
+ * @get_pauseparam: Report pause parameters
+ * @set_pauseparam: Set pause parameters.  Returns a negative error code
+ *	or zero.
+ * @self_test: Run specified self-tests
+ * @get_strings: Return a set of strings that describe the requested objects
+ * @set_phys_id: Identify the physical devices, e.g. by flashing an LED
+ *	attached to it.  The implementation may update the indicator
+ *	asynchronously or synchronously, but in either case it must return
+ *	quickly.  It is initially called with the argument %ETHTOOL_ID_ACTIVE,
+ *	and must either activate asynchronous updates and return zero, return
+ *	a negative error or return a positive frequency for synchronous
+ *	indication (e.g. 1 for one on/off cycle per second).  If it returns
+ *	a frequency then it will be called again at intervals with the
+ *	argument %ETHTOOL_ID_ON or %ETHTOOL_ID_OFF and should set the state of
+ *	the indicator accordingly.  Finally, it is called with the argument
+ *	%ETHTOOL_ID_INACTIVE and must deactivate the indicator.  Returns a
+ *	negative error code or zero.
+ * @get_ethtool_stats: Return extended statistics about the device.
+ *	This is only useful if the device maintains statistics not
+ *	included in &struct rtnl_link_stats64.
+ * @begin: Function to be called before any other operation.  Returns a
+ *	negative error code or zero.
+ * @complete: Function to be called after any other operation except
+ *	@begin.  Will be called even if the other operation failed.
+ * @get_priv_flags: Report driver-specific feature flags.
+ * @set_priv_flags: Set driver-specific feature flags.  Returns a negative
+ *	error code or zero.
+ * @get_sset_count: Get number of strings that @get_strings will write.
+ * @get_rxnfc: Get RX flow classification rules.  Returns a negative
+ *	error code or zero.
+ * @set_rxnfc: Set RX flow classification rules.  Returns a negative
+ *	error code or zero.
+ * @flash_device: Write a firmware image to device's flash memory.
+ *	Returns a negative error code or zero.
+ * @reset: Reset (part of) the device, as specified by a bitmask of
+ *	flags from &enum ethtool_reset_flags.  Returns a negative
+ *	error code or zero.
+ * @get_rxfh_indir_size: Get the size of the RX flow hash indirection table.
+ *	Returns zero if not supported for this specific device.
+ * @get_rxfh_indir: Get the contents of the RX flow hash indirection table.
+ *	Will not be called if @get_rxfh_indir_size returns zero.
+ *	Returns a negative error code or zero.
+ * @set_rxfh_indir: Set the contents of the RX flow hash indirection table.
+ *	Will not be called if @get_rxfh_indir_size returns zero.
+ *	Returns a negative error code or zero.
+ * @get_channels: Get number of channels.
+ * @set_channels: Set number of channels.  Returns a negative error code or
+ *	zero.
+ * @get_dump_flag: Get dump flag indicating current dump length, version,
+ * 		   and flag of the device.
+ * @get_dump_data: Get dump data.
+ * @set_dump: Set dump specific flags to the device.
+ *
+ * All operations are optional (i.e. the function pointer may be set
+ * to %NULL) and callers must take this into account.  Callers must
+ * hold the RTNL lock.
+ *
+ * See the structures used by these operations for further documentation.
+ *
+ * See &struct net_device and &struct net_device_ops for documentation
+ * of the generic netdev features interface.
+ */
+struct ethtool_ops {
+	int	(*get_settings)(struct net_device *, struct ethtool_cmd *);
+	int	(*set_settings)(struct net_device *, struct ethtool_cmd *);
+	void	(*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *);
+	int	(*get_regs_len)(struct net_device *);
+	void	(*get_regs)(struct net_device *, struct ethtool_regs *, void *);
+	void	(*get_wol)(struct net_device *, struct ethtool_wolinfo *);
+	int	(*set_wol)(struct net_device *, struct ethtool_wolinfo *);
+	u32	(*get_msglevel)(struct net_device *);
+	void	(*set_msglevel)(struct net_device *, u32);
+	int	(*nway_reset)(struct net_device *);
+	u32	(*get_link)(struct net_device *);
+	int	(*get_eeprom_len)(struct net_device *);
+	int	(*get_eeprom)(struct net_device *,
+			      struct ethtool_eeprom *, u8 *);
+	int	(*set_eeprom)(struct net_device *,
+			      struct ethtool_eeprom *, u8 *);
+	int	(*get_coalesce)(struct net_device *, struct ethtool_coalesce *);
+	int	(*set_coalesce)(struct net_device *, struct ethtool_coalesce *);
+	void	(*get_ringparam)(struct net_device *,
+				 struct ethtool_ringparam *);
+	int	(*set_ringparam)(struct net_device *,
+				 struct ethtool_ringparam *);
+	void	(*get_pauseparam)(struct net_device *,
+				  struct ethtool_pauseparam*);
+	int	(*set_pauseparam)(struct net_device *,
+				  struct ethtool_pauseparam*);
+	void	(*self_test)(struct net_device *, struct ethtool_test *, u64 *);
+	void	(*get_strings)(struct net_device *, u32 stringset, u8 *);
+	int	(*set_phys_id)(struct net_device *, enum ethtool_phys_id_state);
+	void	(*get_ethtool_stats)(struct net_device *,
+				     struct ethtool_stats *, u64 *);
+	int	(*begin)(struct net_device *);
+	void	(*complete)(struct net_device *);
+	u32	(*get_priv_flags)(struct net_device *);
+	int	(*set_priv_flags)(struct net_device *, u32);
+	int	(*get_sset_count)(struct net_device *, int);
+	int	(*get_rxnfc)(struct net_device *,
+			     struct ethtool_rxnfc *, u32 *rule_locs);
+	int	(*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *);
+	int	(*flash_device)(struct net_device *, struct ethtool_flash *);
+	int	(*reset)(struct net_device *, u32 *);
+	u32	(*get_rxfh_indir_size)(struct net_device *);
+	int	(*get_rxfh_indir)(struct net_device *, u32 *);
+	int	(*set_rxfh_indir)(struct net_device *, const u32 *);
+	void	(*get_channels)(struct net_device *, struct ethtool_channels *);
+	int	(*set_channels)(struct net_device *, struct ethtool_channels *);
+	int	(*get_dump_flag)(struct net_device *, struct ethtool_dump *);
+	int	(*get_dump_data)(struct net_device *,
+				 struct ethtool_dump *, void *);
+	int	(*set_dump)(struct net_device *, struct ethtool_dump *);
+
+};
+#endif /* __KERNEL__ */
+
+/* CMDs currently supported */
+#define ETHTOOL_GSET		0x00000001 /* Get settings. */
+#define ETHTOOL_SSET		0x00000002 /* Set settings. */
+#define ETHTOOL_GDRVINFO	0x00000003 /* Get driver info. */
+#define ETHTOOL_GREGS		0x00000004 /* Get NIC registers. */
+#define ETHTOOL_GWOL		0x00000005 /* Get wake-on-lan options. */
+#define ETHTOOL_SWOL		0x00000006 /* Set wake-on-lan options. */
+#define ETHTOOL_GMSGLVL		0x00000007 /* Get driver message level */
+#define ETHTOOL_SMSGLVL		0x00000008 /* Set driver msg level. */
+#define ETHTOOL_NWAY_RST	0x00000009 /* Restart autonegotiation. */
+/* Get link status for host, i.e. whether the interface *and* the
+ * physical port (if there is one) are up (ethtool_value). */
+#define ETHTOOL_GLINK		0x0000000a
+#define ETHTOOL_GEEPROM		0x0000000b /* Get EEPROM data */
+#define ETHTOOL_SEEPROM		0x0000000c /* Set EEPROM data. */
+#define ETHTOOL_GCOALESCE	0x0000000e /* Get coalesce config */
+#define ETHTOOL_SCOALESCE	0x0000000f /* Set coalesce config. */
+#define ETHTOOL_GRINGPARAM	0x00000010 /* Get ring parameters */
+#define ETHTOOL_SRINGPARAM	0x00000011 /* Set ring parameters. */
+#define ETHTOOL_GPAUSEPARAM	0x00000012 /* Get pause parameters */
+#define ETHTOOL_SPAUSEPARAM	0x00000013 /* Set pause parameters. */
+#define ETHTOOL_GRXCSUM		0x00000014 /* Get RX hw csum enable (ethtool_value) */
+#define ETHTOOL_SRXCSUM		0x00000015 /* Set RX hw csum enable (ethtool_value) */
+#define ETHTOOL_GTXCSUM		0x00000016 /* Get TX hw csum enable (ethtool_value) */
+#define ETHTOOL_STXCSUM		0x00000017 /* Set TX hw csum enable (ethtool_value) */
+#define ETHTOOL_GSG		0x00000018 /* Get scatter-gather enable
+					    * (ethtool_value) */
+#define ETHTOOL_SSG		0x00000019 /* Set scatter-gather enable
+					    * (ethtool_value). */
+#define ETHTOOL_TEST		0x0000001a /* execute NIC self-test. */
+#define ETHTOOL_GSTRINGS	0x0000001b /* get specified string set */
+#define ETHTOOL_PHYS_ID		0x0000001c /* identify the NIC */
+#define ETHTOOL_GSTATS		0x0000001d /* get NIC-specific statistics */
+#define ETHTOOL_GTSO		0x0000001e /* Get TSO enable (ethtool_value) */
+#define ETHTOOL_STSO		0x0000001f /* Set TSO enable (ethtool_value) */
+#define ETHTOOL_GPERMADDR	0x00000020 /* Get permanent hardware address */
+#define ETHTOOL_GUFO		0x00000021 /* Get UFO enable (ethtool_value) */
+#define ETHTOOL_SUFO		0x00000022 /* Set UFO enable (ethtool_value) */
+#define ETHTOOL_GGSO		0x00000023 /* Get GSO enable (ethtool_value) */
+#define ETHTOOL_SGSO		0x00000024 /* Set GSO enable (ethtool_value) */
+#define ETHTOOL_GFLAGS		0x00000025 /* Get flags bitmap(ethtool_value) */
+#define ETHTOOL_SFLAGS		0x00000026 /* Set flags bitmap(ethtool_value) */
+#define ETHTOOL_GPFLAGS		0x00000027 /* Get driver-private flags bitmap */
+#define ETHTOOL_SPFLAGS		0x00000028 /* Set driver-private flags bitmap */
+
+#define ETHTOOL_GRXFH		0x00000029 /* Get RX flow hash configuration */
+#define ETHTOOL_SRXFH		0x0000002a /* Set RX flow hash configuration */
+#define ETHTOOL_GGRO		0x0000002b /* Get GRO enable (ethtool_value) */
+#define ETHTOOL_SGRO		0x0000002c /* Set GRO enable (ethtool_value) */
+#define ETHTOOL_GRXRINGS	0x0000002d /* Get RX rings available for LB */
+#define ETHTOOL_GRXCLSRLCNT	0x0000002e /* Get RX class rule count */
+#define ETHTOOL_GRXCLSRULE	0x0000002f /* Get RX classification rule */
+#define ETHTOOL_GRXCLSRLALL	0x00000030 /* Get all RX classification rule */
+#define ETHTOOL_SRXCLSRLDEL	0x00000031 /* Delete RX classification rule */
+#define ETHTOOL_SRXCLSRLINS	0x00000032 /* Insert RX classification rule */
+#define ETHTOOL_FLASHDEV	0x00000033 /* Flash firmware to device */
+#define ETHTOOL_RESET		0x00000034 /* Reset hardware */
+#define ETHTOOL_SRXNTUPLE	0x00000035 /* Add an n-tuple filter to device */
+#define ETHTOOL_GRXNTUPLE	0x00000036 /* deprecated */
+#define ETHTOOL_GSSET_INFO	0x00000037 /* Get string set info */
+#define ETHTOOL_GRXFHINDIR	0x00000038 /* Get RX flow hash indir'n table */
+#define ETHTOOL_SRXFHINDIR	0x00000039 /* Set RX flow hash indir'n table */
+
+#define ETHTOOL_GFEATURES	0x0000003a /* Get device offload settings */
+#define ETHTOOL_SFEATURES	0x0000003b /* Change device offload settings */
+#define ETHTOOL_GCHANNELS	0x0000003c /* Get no of channels */
+#define ETHTOOL_SCHANNELS	0x0000003d /* Set no of channels */
+#define ETHTOOL_SET_DUMP	0x0000003e /* Set dump settings */
+#define ETHTOOL_GET_DUMP_FLAG	0x0000003f /* Get dump settings */
+#define ETHTOOL_GET_DUMP_DATA	0x00000040 /* Get dump data */
+
+/* compatibility with older code */
+#define SPARC_ETH_GSET		ETHTOOL_GSET
+#define SPARC_ETH_SSET		ETHTOOL_SSET
+
+/* Indicates what features are supported by the interface. */
+#define SUPPORTED_10baseT_Half		(1 << 0)
+#define SUPPORTED_10baseT_Full		(1 << 1)
+#define SUPPORTED_100baseT_Half		(1 << 2)
+#define SUPPORTED_100baseT_Full		(1 << 3)
+#define SUPPORTED_1000baseT_Half	(1 << 4)
+#define SUPPORTED_1000baseT_Full	(1 << 5)
+#define SUPPORTED_Autoneg		(1 << 6)
+#define SUPPORTED_TP			(1 << 7)
+#define SUPPORTED_AUI			(1 << 8)
+#define SUPPORTED_MII			(1 << 9)
+#define SUPPORTED_FIBRE			(1 << 10)
+#define SUPPORTED_BNC			(1 << 11)
+#define SUPPORTED_10000baseT_Full	(1 << 12)
+#define SUPPORTED_Pause			(1 << 13)
+#define SUPPORTED_Asym_Pause		(1 << 14)
+#define SUPPORTED_2500baseX_Full	(1 << 15)
+#define SUPPORTED_Backplane		(1 << 16)
+#define SUPPORTED_1000baseKX_Full	(1 << 17)
+#define SUPPORTED_10000baseKX4_Full	(1 << 18)
+#define SUPPORTED_10000baseKR_Full	(1 << 19)
+#define SUPPORTED_10000baseR_FEC	(1 << 20)
+#define SUPPORTED_20000baseMLD2_Full	(1 << 21)
+#define SUPPORTED_20000baseKR2_Full	(1 << 22)
+
+/* Indicates what features are advertised by the interface. */
+#define ADVERTISED_10baseT_Half		(1 << 0)
+#define ADVERTISED_10baseT_Full		(1 << 1)
+#define ADVERTISED_100baseT_Half	(1 << 2)
+#define ADVERTISED_100baseT_Full	(1 << 3)
+#define ADVERTISED_1000baseT_Half	(1 << 4)
+#define ADVERTISED_1000baseT_Full	(1 << 5)
+#define ADVERTISED_Autoneg		(1 << 6)
+#define ADVERTISED_TP			(1 << 7)
+#define ADVERTISED_AUI			(1 << 8)
+#define ADVERTISED_MII			(1 << 9)
+#define ADVERTISED_FIBRE		(1 << 10)
+#define ADVERTISED_BNC			(1 << 11)
+#define ADVERTISED_10000baseT_Full	(1 << 12)
+#define ADVERTISED_Pause		(1 << 13)
+#define ADVERTISED_Asym_Pause		(1 << 14)
+#define ADVERTISED_2500baseX_Full	(1 << 15)
+#define ADVERTISED_Backplane		(1 << 16)
+#define ADVERTISED_1000baseKX_Full	(1 << 17)
+#define ADVERTISED_10000baseKX4_Full	(1 << 18)
+#define ADVERTISED_10000baseKR_Full	(1 << 19)
+#define ADVERTISED_10000baseR_FEC	(1 << 20)
+#define ADVERTISED_20000baseMLD2_Full	(1 << 21)
+#define ADVERTISED_20000baseKR2_Full	(1 << 22)
+
+/* The following are all involved in forcing a particular link
+ * mode for the device for setting things.  When getting the
+ * devices settings, these indicate the current mode and whether
+ * it was forced up into this mode or autonegotiated.
+ */
+
+/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
+#define SPEED_10		10
+#define SPEED_100		100
+#define SPEED_1000		1000
+#define SPEED_2500		2500
+#define SPEED_10000		10000
+#define SPEED_UNKNOWN		-1
+
+/* Duplex, half or full. */
+#define DUPLEX_HALF		0x00
+#define DUPLEX_FULL		0x01
+#define DUPLEX_UNKNOWN		0xff
+
+/* Which connector port. */
+#define PORT_TP			0x00
+#define PORT_AUI		0x01
+#define PORT_MII		0x02
+#define PORT_FIBRE		0x03
+#define PORT_BNC		0x04
+#define PORT_DA			0x05
+#define PORT_NONE		0xef
+#define PORT_OTHER		0xff
+
+/* Which transceiver to use. */
+#define XCVR_INTERNAL		0x00
+#define XCVR_EXTERNAL		0x01
+#define XCVR_DUMMY1		0x02
+#define XCVR_DUMMY2		0x03
+#define XCVR_DUMMY3		0x04
+
+/* Enable or disable autonegotiation.  If this is set to enable,
+ * the forced link modes above are completely ignored.
+ */
+#define AUTONEG_DISABLE		0x00
+#define AUTONEG_ENABLE		0x01
+
+/* Mode MDI or MDI-X */
+#define ETH_TP_MDI_INVALID	0x00
+#define ETH_TP_MDI		0x01
+#define ETH_TP_MDI_X		0x02
+
+/* Wake-On-Lan options. */
+#define WAKE_PHY		(1 << 0)
+#define WAKE_UCAST		(1 << 1)
+#define WAKE_MCAST		(1 << 2)
+#define WAKE_BCAST		(1 << 3)
+#define WAKE_ARP		(1 << 4)
+#define WAKE_MAGIC		(1 << 5)
+#define WAKE_MAGICSECURE	(1 << 6) /* only meaningful if WAKE_MAGIC */
+
+/* L2-L4 network traffic flow types */
+#define	TCP_V4_FLOW	0x01	/* hash or spec (tcp_ip4_spec) */
+#define	UDP_V4_FLOW	0x02	/* hash or spec (udp_ip4_spec) */
+#define	SCTP_V4_FLOW	0x03	/* hash or spec (sctp_ip4_spec) */
+#define	AH_ESP_V4_FLOW	0x04	/* hash only */
+#define	TCP_V6_FLOW	0x05	/* hash only */
+#define	UDP_V6_FLOW	0x06	/* hash only */
+#define	SCTP_V6_FLOW	0x07	/* hash only */
+#define	AH_ESP_V6_FLOW	0x08	/* hash only */
+#define	AH_V4_FLOW	0x09	/* hash or spec (ah_ip4_spec) */
+#define	ESP_V4_FLOW	0x0a	/* hash or spec (esp_ip4_spec) */
+#define	AH_V6_FLOW	0x0b	/* hash only */
+#define	ESP_V6_FLOW	0x0c	/* hash only */
+#define	IP_USER_FLOW	0x0d	/* spec only (usr_ip4_spec) */
+#define	IPV4_FLOW	0x10	/* hash only */
+#define	IPV6_FLOW	0x11	/* hash only */
+#define	ETHER_FLOW	0x12	/* spec only (ether_spec) */
+/* Flag to enable additional fields in struct ethtool_rx_flow_spec */
+#define	FLOW_EXT	0x80000000
+
+/* L3-L4 network traffic flow hash options */
+#define	RXH_L2DA	(1 << 1)
+#define	RXH_VLAN	(1 << 2)
+#define	RXH_L3_PROTO	(1 << 3)
+#define	RXH_IP_SRC	(1 << 4)
+#define	RXH_IP_DST	(1 << 5)
+#define	RXH_L4_B_0_1	(1 << 6) /* src port in case of TCP/UDP/SCTP */
+#define	RXH_L4_B_2_3	(1 << 7) /* dst port in case of TCP/UDP/SCTP */
+#define	RXH_DISCARD	(1 << 31)
+
+#define	RX_CLS_FLOW_DISC	0xffffffffffffffffULL
+
+/* Special RX classification rule insert location values */
+#define RX_CLS_LOC_SPECIAL	0x80000000	/* flag */
+#define RX_CLS_LOC_ANY		0xffffffff
+#define RX_CLS_LOC_FIRST	0xfffffffe
+#define RX_CLS_LOC_LAST		0xfffffffd
+
+/* Reset flags */
+/* The reset() operation must clear the flags for the components which
+ * were actually reset.  On successful return, the flags indicate the
+ * components which were not reset, either because they do not exist
+ * in the hardware or because they cannot be reset independently.  The
+ * driver must never reset any components that were not requested.
+ */
+enum ethtool_reset_flags {
+	/* These flags represent components dedicated to the interface
+	 * the command is addressed to.  Shift any flag left by
+	 * ETH_RESET_SHARED_SHIFT to reset a shared component of the
+	 * same type.
+	 */
+	ETH_RESET_MGMT		= 1 << 0,	/* Management processor */
+	ETH_RESET_IRQ		= 1 << 1,	/* Interrupt requester */
+	ETH_RESET_DMA		= 1 << 2,	/* DMA engine */
+	ETH_RESET_FILTER	= 1 << 3,	/* Filtering/flow direction */
+	ETH_RESET_OFFLOAD	= 1 << 4,	/* Protocol offload */
+	ETH_RESET_MAC		= 1 << 5,	/* Media access controller */
+	ETH_RESET_PHY		= 1 << 6,	/* Transceiver/PHY */
+	ETH_RESET_RAM		= 1 << 7,	/* RAM shared between
+						 * multiple components */
+
+	ETH_RESET_DEDICATED	= 0x0000ffff,	/* All components dedicated to
+						 * this interface */
+	ETH_RESET_ALL		= 0xffffffff,	/* All components used by this
+						 * interface, even if shared */
+};
+#define ETH_RESET_SHARED_SHIFT	16
+
+#endif /* _LINUX_ETHTOOL_H */
diff --git a/include/linux/eventfd.h b/include/linux/eventfd.h
new file mode 100644
index 00000000..91bb4f27
--- /dev/null
+++ b/include/linux/eventfd.h
@@ -0,0 +1,83 @@
+/*
+ *  include/linux/eventfd.h
+ *
+ *  Copyright (C) 2007  Davide Libenzi <davidel@xmailserver.org>
+ *
+ */
+
+#ifndef _LINUX_EVENTFD_H
+#define _LINUX_EVENTFD_H
+
+#include <linux/fcntl.h>
+#include <linux/file.h>
+#include <linux/wait.h>
+
+/*
+ * CAREFUL: Check include/asm-generic/fcntl.h when defining
+ * new flags, since they might collide with O_* ones. We want
+ * to re-use O_* flags that couldn't possibly have a meaning
+ * from eventfd, in order to leave a free define-space for
+ * shared O_* flags.
+ */
+#define EFD_SEMAPHORE (1 << 0)
+#define EFD_CLOEXEC O_CLOEXEC
+#define EFD_NONBLOCK O_NONBLOCK
+
+#define EFD_SHARED_FCNTL_FLAGS (O_CLOEXEC | O_NONBLOCK)
+#define EFD_FLAGS_SET (EFD_SHARED_FCNTL_FLAGS | EFD_SEMAPHORE)
+
+#ifdef CONFIG_EVENTFD
+
+struct file *eventfd_file_create(unsigned int count, int flags);
+struct eventfd_ctx *eventfd_ctx_get(struct eventfd_ctx *ctx);
+void eventfd_ctx_put(struct eventfd_ctx *ctx);
+struct file *eventfd_fget(int fd);
+struct eventfd_ctx *eventfd_ctx_fdget(int fd);
+struct eventfd_ctx *eventfd_ctx_fileget(struct file *file);
+int eventfd_signal(struct eventfd_ctx *ctx, int n);
+ssize_t eventfd_ctx_read(struct eventfd_ctx *ctx, int no_wait, __u64 *cnt);
+int eventfd_ctx_remove_wait_queue(struct eventfd_ctx *ctx, wait_queue_t *wait,
+				  __u64 *cnt);
+
+#else /* CONFIG_EVENTFD */
+
+/*
+ * Ugly ugly ugly error layer to support modules that uses eventfd but
+ * pretend to work in !CONFIG_EVENTFD configurations. Namely, AIO.
+ */
+static inline struct file *eventfd_file_create(unsigned int count, int flags)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline struct eventfd_ctx *eventfd_ctx_fdget(int fd)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline int eventfd_signal(struct eventfd_ctx *ctx, int n)
+{
+	return -ENOSYS;
+}
+
+static inline void eventfd_ctx_put(struct eventfd_ctx *ctx)
+{
+
+}
+
+static inline ssize_t eventfd_ctx_read(struct eventfd_ctx *ctx, int no_wait,
+				       __u64 *cnt)
+{
+	return -ENOSYS;
+}
+
+static inline int eventfd_ctx_remove_wait_queue(struct eventfd_ctx *ctx,
+						wait_queue_t *wait, __u64 *cnt)
+{
+	return -ENOSYS;
+}
+
+#endif
+
+#endif /* _LINUX_EVENTFD_H */
+
diff --git a/include/linux/eventpoll.h b/include/linux/eventpoll.h
new file mode 100644
index 00000000..6f8be328
--- /dev/null
+++ b/include/linux/eventpoll.h
@@ -0,0 +1,121 @@
+/*
+ *  include/linux/eventpoll.h ( Efficient event polling implementation )
+ *  Copyright (C) 2001,...,2006	 Davide Libenzi
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  Davide Libenzi <davidel@xmailserver.org>
+ *
+ */
+
+#ifndef _LINUX_EVENTPOLL_H
+#define _LINUX_EVENTPOLL_H
+
+/* For O_CLOEXEC */
+#include <linux/fcntl.h>
+#include <linux/types.h>
+
+/* Flags for epoll_create1.  */
+#define EPOLL_CLOEXEC O_CLOEXEC
+
+/* Valid opcodes to issue to sys_epoll_ctl() */
+#define EPOLL_CTL_ADD 1
+#define EPOLL_CTL_DEL 2
+#define EPOLL_CTL_MOD 3
+
+/*
+ * Request the handling of system wakeup events so as to prevent system suspends
+ * from happening while those events are being processed.
+ *
+ * Assuming neither EPOLLET nor EPOLLONESHOT is set, system suspends will not be
+ * re-allowed until epoll_wait is called again after consuming the wakeup
+ * event(s).
+ *
+ * Requires CAP_EPOLLWAKEUP
+ */
+#define EPOLLWAKEUP (1 << 29)
+
+/* Set the One Shot behaviour for the target file descriptor */
+#define EPOLLONESHOT (1 << 30)
+
+/* Set the Edge Triggered behaviour for the target file descriptor */
+#define EPOLLET (1 << 31)
+
+/* 
+ * On x86-64 make the 64bit structure have the same alignment as the
+ * 32bit structure. This makes 32bit emulation easier.
+ *
+ * UML/x86_64 needs the same packing as x86_64
+ */
+#ifdef __x86_64__
+#define EPOLL_PACKED __attribute__((packed))
+#else
+#define EPOLL_PACKED
+#endif
+
+struct epoll_event {
+	__u32 events;
+	__u64 data;
+} EPOLL_PACKED;
+
+#ifdef __KERNEL__
+
+/* Forward declarations to avoid compiler errors */
+struct file;
+
+
+#ifdef CONFIG_EPOLL
+
+/* Used to initialize the epoll bits inside the "struct file" */
+static inline void eventpoll_init_file(struct file *file)
+{
+	INIT_LIST_HEAD(&file->f_ep_links);
+	INIT_LIST_HEAD(&file->f_tfile_llink);
+}
+
+
+/* Used to release the epoll bits inside the "struct file" */
+void eventpoll_release_file(struct file *file);
+
+/*
+ * This is called from inside fs/file_table.c:__fput() to unlink files
+ * from the eventpoll interface. We need to have this facility to cleanup
+ * correctly files that are closed without being removed from the eventpoll
+ * interface.
+ */
+static inline void eventpoll_release(struct file *file)
+{
+
+	/*
+	 * Fast check to avoid the get/release of the semaphore. Since
+	 * we're doing this outside the semaphore lock, it might return
+	 * false negatives, but we don't care. It'll help in 99.99% of cases
+	 * to avoid the semaphore lock. False positives simply cannot happen
+	 * because the file in on the way to be removed and nobody ( but
+	 * eventpoll ) has still a reference to this file.
+	 */
+	if (likely(list_empty(&file->f_ep_links)))
+		return;
+
+	/*
+	 * The file is being closed while it is still linked to an epoll
+	 * descriptor. We need to handle this by correctly unlinking it
+	 * from its containers.
+	 */
+	eventpoll_release_file(file);
+}
+
+#else
+
+static inline void eventpoll_init_file(struct file *file) {}
+static inline void eventpoll_release(struct file *file) {}
+
+#endif
+
+#endif /* #ifdef __KERNEL__ */
+
+#endif /* #ifndef _LINUX_EVENTPOLL_H */
+
diff --git a/include/linux/evm.h b/include/linux/evm.h
new file mode 100644
index 00000000..9fc13a76
--- /dev/null
+++ b/include/linux/evm.h
@@ -0,0 +1,100 @@
+/*
+ * evm.h
+ *
+ * Copyright (c) 2009 IBM Corporation
+ * Author: Mimi Zohar <zohar@us.ibm.com>
+ */
+
+#ifndef _LINUX_EVM_H
+#define _LINUX_EVM_H
+
+#include <linux/integrity.h>
+#include <linux/xattr.h>
+
+struct integrity_iint_cache;
+
+#ifdef CONFIG_EVM
+extern enum integrity_status evm_verifyxattr(struct dentry *dentry,
+					     const char *xattr_name,
+					     void *xattr_value,
+					     size_t xattr_value_len,
+					     struct integrity_iint_cache *iint);
+extern int evm_inode_setattr(struct dentry *dentry, struct iattr *attr);
+extern void evm_inode_post_setattr(struct dentry *dentry, int ia_valid);
+extern int evm_inode_setxattr(struct dentry *dentry, const char *name,
+			      const void *value, size_t size);
+extern void evm_inode_post_setxattr(struct dentry *dentry,
+				    const char *xattr_name,
+				    const void *xattr_value,
+				    size_t xattr_value_len);
+extern int evm_inode_removexattr(struct dentry *dentry, const char *xattr_name);
+extern void evm_inode_post_removexattr(struct dentry *dentry,
+				       const char *xattr_name);
+extern int evm_inode_init_security(struct inode *inode,
+				   const struct xattr *xattr_array,
+				   struct xattr *evm);
+#ifdef CONFIG_FS_POSIX_ACL
+extern int posix_xattr_acl(const char *xattrname);
+#else
+static inline int posix_xattr_acl(const char *xattrname)
+{
+	return 0;
+}
+#endif
+#else
+#ifdef CONFIG_INTEGRITY
+static inline enum integrity_status evm_verifyxattr(struct dentry *dentry,
+						    const char *xattr_name,
+						    void *xattr_value,
+						    size_t xattr_value_len,
+					struct integrity_iint_cache *iint)
+{
+	return INTEGRITY_UNKNOWN;
+}
+#endif
+
+static inline int evm_inode_setattr(struct dentry *dentry, struct iattr *attr)
+{
+	return 0;
+}
+
+static inline void evm_inode_post_setattr(struct dentry *dentry, int ia_valid)
+{
+	return;
+}
+
+static inline int evm_inode_setxattr(struct dentry *dentry, const char *name,
+				     const void *value, size_t size)
+{
+	return 0;
+}
+
+static inline void evm_inode_post_setxattr(struct dentry *dentry,
+					   const char *xattr_name,
+					   const void *xattr_value,
+					   size_t xattr_value_len)
+{
+	return;
+}
+
+static inline int evm_inode_removexattr(struct dentry *dentry,
+					const char *xattr_name)
+{
+	return 0;
+}
+
+static inline void evm_inode_post_removexattr(struct dentry *dentry,
+					      const char *xattr_name)
+{
+	return;
+}
+
+static inline int evm_inode_init_security(struct inode *inode,
+					  const struct xattr *xattr_array,
+					  struct xattr *evm)
+{
+	return 0;
+}
+
+#endif /* CONFIG_EVM_H */
+#endif /* LINUX_EVM_H */
diff --git a/include/linux/export.h b/include/linux/export.h
new file mode 100644
index 00000000..696c0f48
--- /dev/null
+++ b/include/linux/export.h
@@ -0,0 +1,89 @@
+#ifndef _LINUX_EXPORT_H
+#define _LINUX_EXPORT_H
+/*
+ * Export symbols from the kernel to modules.  Forked from module.h
+ * to reduce the amount of pointless cruft we feed to gcc when only
+ * exporting a simple symbol or two.
+ *
+ * If you feel the need to add #include <linux/foo.h> to this file
+ * then you are doing something wrong and should go away silently.
+ */
+
+/* Some toolchains use a `_' prefix for all user symbols. */
+#ifdef CONFIG_SYMBOL_PREFIX
+#define MODULE_SYMBOL_PREFIX CONFIG_SYMBOL_PREFIX
+#else
+#define MODULE_SYMBOL_PREFIX ""
+#endif
+
+struct kernel_symbol
+{
+	unsigned long value;
+	const char *name;
+};
+
+#ifdef MODULE
+extern struct module __this_module;
+#define THIS_MODULE (&__this_module)
+#else
+#define THIS_MODULE ((struct module *)0)
+#endif
+
+#ifdef CONFIG_MODULES
+
+#ifndef __GENKSYMS__
+#ifdef CONFIG_MODVERSIONS
+/* Mark the CRC weak since genksyms apparently decides not to
+ * generate a checksums for some symbols */
+#define __CRC_SYMBOL(sym, sec)					\
+	extern void *__crc_##sym __attribute__((weak));		\
+	static const unsigned long __kcrctab_##sym		\
+	__used							\
+	__attribute__((section("___kcrctab" sec "+" #sym), unused))	\
+	= (unsigned long) &__crc_##sym;
+#else
+#define __CRC_SYMBOL(sym, sec)
+#endif
+
+/* For every exported symbol, place a struct in the __ksymtab section */
+#define __EXPORT_SYMBOL(sym, sec)				\
+	extern typeof(sym) sym;					\
+	__CRC_SYMBOL(sym, sec)					\
+	static const char __kstrtab_##sym[]			\
+	__attribute__((section("__ksymtab_strings"), aligned(1))) \
+	= MODULE_SYMBOL_PREFIX #sym;				\
+	static const struct kernel_symbol __ksymtab_##sym	\
+	__used							\
+	__attribute__((section("___ksymtab" sec "+" #sym), unused))	\
+	= { (unsigned long)&sym, __kstrtab_##sym }
+
+#define EXPORT_SYMBOL(sym)					\
+	__EXPORT_SYMBOL(sym, "")
+
+#define EXPORT_SYMBOL_GPL(sym)					\
+	__EXPORT_SYMBOL(sym, "_gpl")
+
+#define EXPORT_SYMBOL_GPL_FUTURE(sym)				\
+	__EXPORT_SYMBOL(sym, "_gpl_future")
+
+#ifdef CONFIG_UNUSED_SYMBOLS
+#define EXPORT_UNUSED_SYMBOL(sym) __EXPORT_SYMBOL(sym, "_unused")
+#define EXPORT_UNUSED_SYMBOL_GPL(sym) __EXPORT_SYMBOL(sym, "_unused_gpl")
+#else
+#define EXPORT_UNUSED_SYMBOL(sym)
+#define EXPORT_UNUSED_SYMBOL_GPL(sym)
+#endif
+
+#endif	/* __GENKSYMS__ */
+
+#else /* !CONFIG_MODULES... */
+
+#define EXPORT_SYMBOL(sym)
+#define EXPORT_SYMBOL_GPL(sym)
+#define EXPORT_SYMBOL_GPL_FUTURE(sym)
+#define EXPORT_UNUSED_SYMBOL(sym)
+#define EXPORT_UNUSED_SYMBOL_GPL(sym)
+
+#endif /* CONFIG_MODULES */
+
+#endif /* _LINUX_EXPORT_H */
diff --git a/include/linux/exportfs.h b/include/linux/exportfs.h
new file mode 100644
index 00000000..3a4cef53
--- /dev/null
+++ b/include/linux/exportfs.h
@@ -0,0 +1,196 @@
+#ifndef LINUX_EXPORTFS_H
+#define LINUX_EXPORTFS_H 1
+
+#include <linux/types.h>
+
+struct dentry;
+struct inode;
+struct super_block;
+struct vfsmount;
+
+/* limit the handle size to NFSv4 handle size now */
+#define MAX_HANDLE_SZ 128
+
+/*
+ * The fileid_type identifies how the file within the filesystem is encoded.
+ * In theory this is freely set and parsed by the filesystem, but we try to
+ * stick to conventions so we can share some generic code and don't confuse
+ * sniffers like ethereal/wireshark.
+ *
+ * The filesystem must not use the value '0' or '0xff'.
+ */
+enum fid_type {
+	/*
+	 * The root, or export point, of the filesystem.
+	 * (Never actually passed down to the filesystem.
+	 */
+	FILEID_ROOT = 0,
+
+	/*
+	 * 32bit inode number, 32 bit generation number.
+	 */
+	FILEID_INO32_GEN = 1,
+
+	/*
+	 * 32bit inode number, 32 bit generation number,
+	 * 32 bit parent directory inode number.
+	 */
+	FILEID_INO32_GEN_PARENT = 2,
+
+	/*
+	 * 64 bit object ID, 64 bit root object ID,
+	 * 32 bit generation number.
+	 */
+	FILEID_BTRFS_WITHOUT_PARENT = 0x4d,
+
+	/*
+	 * 64 bit object ID, 64 bit root object ID,
+	 * 32 bit generation number,
+	 * 64 bit parent object ID, 32 bit parent generation.
+	 */
+	FILEID_BTRFS_WITH_PARENT = 0x4e,
+
+	/*
+	 * 64 bit object ID, 64 bit root object ID,
+	 * 32 bit generation number,
+	 * 64 bit parent object ID, 32 bit parent generation,
+	 * 64 bit parent root object ID.
+	 */
+	FILEID_BTRFS_WITH_PARENT_ROOT = 0x4f,
+
+	/*
+	 * 32 bit block number, 16 bit partition reference,
+	 * 16 bit unused, 32 bit generation number.
+	 */
+	FILEID_UDF_WITHOUT_PARENT = 0x51,
+
+	/*
+	 * 32 bit block number, 16 bit partition reference,
+	 * 16 bit unused, 32 bit generation number,
+	 * 32 bit parent block number, 32 bit parent generation number
+	 */
+	FILEID_UDF_WITH_PARENT = 0x52,
+
+	/*
+	 * 64 bit checkpoint number, 64 bit inode number,
+	 * 32 bit generation number.
+	 */
+	FILEID_NILFS_WITHOUT_PARENT = 0x61,
+
+	/*
+	 * 64 bit checkpoint number, 64 bit inode number,
+	 * 32 bit generation number, 32 bit parent generation.
+	 * 64 bit parent inode number.
+	 */
+	FILEID_NILFS_WITH_PARENT = 0x62,
+};
+
+struct fid {
+	union {
+		struct {
+			u32 ino;
+			u32 gen;
+			u32 parent_ino;
+			u32 parent_gen;
+		} i32;
+ 		struct {
+ 			u32 block;
+ 			u16 partref;
+ 			u16 parent_partref;
+ 			u32 generation;
+ 			u32 parent_block;
+ 			u32 parent_generation;
+ 		} udf;
+		__u32 raw[0];
+	};
+};
+
+/**
+ * struct export_operations - for nfsd to communicate with file systems
+ * @encode_fh:      encode a file handle fragment from a dentry
+ * @fh_to_dentry:   find the implied object and get a dentry for it
+ * @fh_to_parent:   find the implied object's parent and get a dentry for it
+ * @get_name:       find the name for a given inode in a given directory
+ * @get_parent:     find the parent of a given directory
+ * @commit_metadata: commit metadata changes to stable storage
+ *
+ * See Documentation/filesystems/nfs/Exporting for details on how to use
+ * this interface correctly.
+ *
+ * encode_fh:
+ *    @encode_fh should store in the file handle fragment @fh (using at most
+ *    @max_len bytes) information that can be used by @decode_fh to recover the
+ *    file referred to by the &struct dentry @de.  If the @connectable flag is
+ *    set, the encode_fh() should store sufficient information so that a good
+ *    attempt can be made to find not only the file but also it's place in the
+ *    filesystem.   This typically means storing a reference to de->d_parent in
+ *    the filehandle fragment.  encode_fh() should return the fileid_type on
+ *    success and on error returns 255 (if the space needed to encode fh is
+ *    greater than @max_len*4 bytes). On error @max_len contains the minimum
+ *    size(in 4 byte unit) needed to encode the file handle.
+ *
+ * fh_to_dentry:
+ *    @fh_to_dentry is given a &struct super_block (@sb) and a file handle
+ *    fragment (@fh, @fh_len). It should return a &struct dentry which refers
+ *    to the same file that the file handle fragment refers to.  If it cannot,
+ *    it should return a %NULL pointer if the file was found but no acceptable
+ *    &dentries were available, or an %ERR_PTR error code indicating why it
+ *    couldn't be found (e.g. %ENOENT or %ENOMEM).  Any suitable dentry can be
+ *    returned including, if necessary, a new dentry created with d_alloc_root.
+ *    The caller can then find any other extant dentries by following the
+ *    d_alias links.
+ *
+ * fh_to_parent:
+ *    Same as @fh_to_dentry, except that it returns a pointer to the parent
+ *    dentry if it was encoded into the filehandle fragment by @encode_fh.
+ *
+ * get_name:
+ *    @get_name should find a name for the given @child in the given @parent
+ *    directory.  The name should be stored in the @name (with the
+ *    understanding that it is already pointing to a a %NAME_MAX+1 sized
+ *    buffer.   get_name() should return %0 on success, a negative error code
+ *    or error.  @get_name will be called without @parent->i_mutex held.
+ *
+ * get_parent:
+ *    @get_parent should find the parent directory for the given @child which
+ *    is also a directory.  In the event that it cannot be found, or storage
+ *    space cannot be allocated, a %ERR_PTR should be returned.
+ *
+ * commit_metadata:
+ *    @commit_metadata should commit metadata changes to stable storage.
+ *
+ * Locking rules:
+ *    get_parent is called with child->d_inode->i_mutex down
+ *    get_name is not (which is possibly inconsistent)
+ */
+
+struct export_operations {
+	int (*encode_fh)(struct dentry *de, __u32 *fh, int *max_len,
+			int connectable);
+	struct dentry * (*fh_to_dentry)(struct super_block *sb, struct fid *fid,
+			int fh_len, int fh_type);
+	struct dentry * (*fh_to_parent)(struct super_block *sb, struct fid *fid,
+			int fh_len, int fh_type);
+	int (*get_name)(struct dentry *parent, char *name,
+			struct dentry *child);
+	struct dentry * (*get_parent)(struct dentry *child);
+	int (*commit_metadata)(struct inode *inode);
+};
+
+extern int exportfs_encode_fh(struct dentry *dentry, struct fid *fid,
+	int *max_len, int connectable);
+extern struct dentry *exportfs_decode_fh(struct vfsmount *mnt, struct fid *fid,
+	int fh_len, int fileid_type, int (*acceptable)(void *, struct dentry *),
+	void *context);
+
+/*
+ * Generic helpers for filesystems.
+ */
+extern struct dentry *generic_fh_to_dentry(struct super_block *sb,
+	struct fid *fid, int fh_len, int fh_type,
+	struct inode *(*get_inode) (struct super_block *sb, u64 ino, u32 gen));
+extern struct dentry *generic_fh_to_parent(struct super_block *sb,
+	struct fid *fid, int fh_len, int fh_type,
+	struct inode *(*get_inode) (struct super_block *sb, u64 ino, u32 gen));
+
+#endif /* LINUX_EXPORTFS_H */
diff --git a/include/linux/ext2_fs.h b/include/linux/ext2_fs.h
new file mode 100644
index 00000000..2723e715
--- /dev/null
+++ b/include/linux/ext2_fs.h
@@ -0,0 +1,42 @@
+/*
+ *  linux/include/linux/ext2_fs.h
+ *
+ * Copyright (C) 1992, 1993, 1994, 1995
+ * Remy Card (card@masi.ibp.fr)
+ * Laboratoire MASI - Institut Blaise Pascal
+ * Universite Pierre et Marie Curie (Paris VI)
+ *
+ *  from
+ *
+ *  linux/include/linux/minix_fs.h
+ *
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ */
+
+#ifndef _LINUX_EXT2_FS_H
+#define _LINUX_EXT2_FS_H
+
+#include <linux/types.h>
+#include <linux/magic.h>
+
+#define EXT2_NAME_LEN 255
+
+/*
+ * Maximal count of links to a file
+ */
+#define EXT2_LINK_MAX		32000
+
+#define EXT2_SB_MAGIC_OFFSET	0x38
+#define EXT2_SB_BLOCKS_OFFSET	0x04
+#define EXT2_SB_BSIZE_OFFSET	0x18
+
+static inline u64 ext2_image_size(void *ext2_sb)
+{
+	__u8 *p = ext2_sb;
+	if (*(__le16 *)(p + EXT2_SB_MAGIC_OFFSET) != cpu_to_le16(EXT2_SUPER_MAGIC))
+		return 0;
+	return (u64)le32_to_cpup((__le32 *)(p + EXT2_SB_BLOCKS_OFFSET)) <<
+		le32_to_cpup((__le32 *)(p + EXT2_SB_BSIZE_OFFSET));
+}
+
+#endif	/* _LINUX_EXT2_FS_H */
diff --git a/include/linux/f75375s.h b/include/linux/f75375s.h
new file mode 100644
index 00000000..e99e2250
--- /dev/null
+++ b/include/linux/f75375s.h
@@ -0,0 +1,21 @@
+/*
+ * f75375s.h - platform data structure for f75375s sensor
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007, Riku Voipio <riku.voipio@iki.fi>
+ */
+
+#ifndef __LINUX_F75375S_H
+#define __LINUX_F75375S_H
+
+/* We want to set fans spinning on systems where there is no
+ * BIOS to do that for us */
+struct f75375s_platform_data {
+	u8 pwm[2];
+	u8 pwm_enable[2];
+};
+
+#endif /* __LINUX_F75375S_H */
diff --git a/include/linux/fadvise.h b/include/linux/fadvise.h
new file mode 100644
index 00000000..e8e74713
--- /dev/null
+++ b/include/linux/fadvise.h
@@ -0,0 +1,21 @@
+#ifndef FADVISE_H_INCLUDED
+#define FADVISE_H_INCLUDED
+
+#define POSIX_FADV_NORMAL	0 /* No further special treatment.  */
+#define POSIX_FADV_RANDOM	1 /* Expect random page references.  */
+#define POSIX_FADV_SEQUENTIAL	2 /* Expect sequential page references.  */
+#define POSIX_FADV_WILLNEED	3 /* Will need these pages.  */
+
+/*
+ * The advise values for POSIX_FADV_DONTNEED and POSIX_ADV_NOREUSE
+ * for s390-64 differ from the values for the rest of the world.
+ */
+#if defined(__s390x__)
+#define POSIX_FADV_DONTNEED	6 /* Don't need these pages.  */
+#define POSIX_FADV_NOREUSE	7 /* Data will be accessed once.  */
+#else
+#define POSIX_FADV_DONTNEED	4 /* Don't need these pages.  */
+#define POSIX_FADV_NOREUSE	5 /* Data will be accessed once.  */
+#endif
+
+#endif	/* FADVISE_H_INCLUDED */
diff --git a/include/linux/falloc.h b/include/linux/falloc.h
new file mode 100644
index 00000000..73e0b628
--- /dev/null
+++ b/include/linux/falloc.h
@@ -0,0 +1,28 @@
+#ifndef _FALLOC_H_
+#define _FALLOC_H_
+
+#define FALLOC_FL_KEEP_SIZE	0x01 /* default is extend size */
+#define FALLOC_FL_PUNCH_HOLE	0x02 /* de-allocates range */
+
+#ifdef __KERNEL__
+
+/*
+ * Space reservation ioctls and argument structure
+ * are designed to be compatible with the legacy XFS ioctls.
+ */
+struct space_resv {
+	__s16		l_type;
+	__s16		l_whence;
+	__s64		l_start;
+	__s64		l_len;		/* len == 0 means until end of file */
+	__s32		l_sysid;
+	__u32		l_pid;
+	__s32		l_pad[4];	/* reserved area */
+};
+
+#define FS_IOC_RESVSP		_IOW('X', 40, struct space_resv)
+#define FS_IOC_RESVSP64		_IOW('X', 42, struct space_resv)
+
+#endif /* __KERNEL__ */
+
+#endif /* _FALLOC_H_ */
diff --git a/include/linux/fanotify.h b/include/linux/fanotify.h
new file mode 100644
index 00000000..6c6133f7
--- /dev/null
+++ b/include/linux/fanotify.h
@@ -0,0 +1,120 @@
+#ifndef _LINUX_FANOTIFY_H
+#define _LINUX_FANOTIFY_H
+
+#include <linux/types.h>
+
+/* the following events that user-space can register for */
+#define FAN_ACCESS		0x00000001	/* File was accessed */
+#define FAN_MODIFY		0x00000002	/* File was modified */
+#define FAN_CLOSE_WRITE		0x00000008	/* Writtable file closed */
+#define FAN_CLOSE_NOWRITE	0x00000010	/* Unwrittable file closed */
+#define FAN_OPEN		0x00000020	/* File was opened */
+
+#define FAN_Q_OVERFLOW		0x00004000	/* Event queued overflowed */
+
+#define FAN_OPEN_PERM		0x00010000	/* File open in perm check */
+#define FAN_ACCESS_PERM		0x00020000	/* File accessed in perm check */
+
+#define FAN_ONDIR		0x40000000	/* event occurred against dir */
+
+#define FAN_EVENT_ON_CHILD	0x08000000	/* interested in child events */
+
+/* helper events */
+#define FAN_CLOSE		(FAN_CLOSE_WRITE | FAN_CLOSE_NOWRITE) /* close */
+
+/* flags used for fanotify_init() */
+#define FAN_CLOEXEC		0x00000001
+#define FAN_NONBLOCK		0x00000002
+
+/* These are NOT bitwise flags.  Both bits are used togther.  */
+#define FAN_CLASS_NOTIF		0x00000000
+#define FAN_CLASS_CONTENT	0x00000004
+#define FAN_CLASS_PRE_CONTENT	0x00000008
+#define FAN_ALL_CLASS_BITS	(FAN_CLASS_NOTIF | FAN_CLASS_CONTENT | \
+				 FAN_CLASS_PRE_CONTENT)
+
+#define FAN_UNLIMITED_QUEUE	0x00000010
+#define FAN_UNLIMITED_MARKS	0x00000020
+
+#define FAN_ALL_INIT_FLAGS	(FAN_CLOEXEC | FAN_NONBLOCK | \
+				 FAN_ALL_CLASS_BITS | FAN_UNLIMITED_QUEUE |\
+				 FAN_UNLIMITED_MARKS)
+
+/* flags used for fanotify_modify_mark() */
+#define FAN_MARK_ADD		0x00000001
+#define FAN_MARK_REMOVE		0x00000002
+#define FAN_MARK_DONT_FOLLOW	0x00000004
+#define FAN_MARK_ONLYDIR	0x00000008
+#define FAN_MARK_MOUNT		0x00000010
+#define FAN_MARK_IGNORED_MASK	0x00000020
+#define FAN_MARK_IGNORED_SURV_MODIFY	0x00000040
+#define FAN_MARK_FLUSH		0x00000080
+#ifdef __KERNEL__
+/* not valid from userspace, only kernel internal */
+#define FAN_MARK_ONDIR		0x00000100
+#endif
+
+#define FAN_ALL_MARK_FLAGS	(FAN_MARK_ADD |\
+				 FAN_MARK_REMOVE |\
+				 FAN_MARK_DONT_FOLLOW |\
+				 FAN_MARK_ONLYDIR |\
+				 FAN_MARK_MOUNT |\
+				 FAN_MARK_IGNORED_MASK |\
+				 FAN_MARK_IGNORED_SURV_MODIFY |\
+				 FAN_MARK_FLUSH)
+
+/*
+ * All of the events - we build the list by hand so that we can add flags in
+ * the future and not break backward compatibility.  Apps will get only the
+ * events that they originally wanted.  Be sure to add new events here!
+ */
+#define FAN_ALL_EVENTS (FAN_ACCESS |\
+			FAN_MODIFY |\
+			FAN_CLOSE |\
+			FAN_OPEN)
+
+/*
+ * All events which require a permission response from userspace
+ */
+#define FAN_ALL_PERM_EVENTS (FAN_OPEN_PERM |\
+			     FAN_ACCESS_PERM)
+
+#define FAN_ALL_OUTGOING_EVENTS	(FAN_ALL_EVENTS |\
+				 FAN_ALL_PERM_EVENTS |\
+				 FAN_Q_OVERFLOW)
+
+#define FANOTIFY_METADATA_VERSION	3
+
+struct fanotify_event_metadata {
+	__u32 event_len;
+	__u8 vers;
+	__u8 reserved;
+	__u16 metadata_len;
+	__aligned_u64 mask;
+	__s32 fd;
+	__s32 pid;
+};
+
+struct fanotify_response {
+	__s32 fd;
+	__u32 response;
+};
+
+/* Legit userspace responses to a _PERM event */
+#define FAN_ALLOW	0x01
+#define FAN_DENY	0x02
+/* No fd set in event */
+#define FAN_NOFD	-1
+
+/* Helper functions to deal with fanotify_event_metadata buffers */
+#define FAN_EVENT_METADATA_LEN (sizeof(struct fanotify_event_metadata))
+
+#define FAN_EVENT_NEXT(meta, len) ((len) -= (meta)->event_len, \
+				   (struct fanotify_event_metadata*)(((char *)(meta)) + \
+				   (meta)->event_len))
+
+#define FAN_EVENT_OK(meta, len)	((long)(len) >= (long)FAN_EVENT_METADATA_LEN && \
+				(long)(meta)->event_len >= (long)FAN_EVENT_METADATA_LEN && \
+				(long)(meta)->event_len <= (long)(len))
+
+#endif /* _LINUX_FANOTIFY_H */
diff --git a/include/linux/fault-inject.h b/include/linux/fault-inject.h
new file mode 100644
index 00000000..c6f996f2
--- /dev/null
+++ b/include/linux/fault-inject.h
@@ -0,0 +1,69 @@
+#ifndef _LINUX_FAULT_INJECT_H
+#define _LINUX_FAULT_INJECT_H
+
+#ifdef CONFIG_FAULT_INJECTION
+
+#include <linux/types.h>
+#include <linux/debugfs.h>
+#include <linux/atomic.h>
+
+/*
+ * For explanation of the elements of this struct, see
+ * Documentation/fault-injection/fault-injection.txt
+ */
+struct fault_attr {
+	unsigned long probability;
+	unsigned long interval;
+	atomic_t times;
+	atomic_t space;
+	unsigned long verbose;
+	u32 task_filter;
+	unsigned long stacktrace_depth;
+	unsigned long require_start;
+	unsigned long require_end;
+	unsigned long reject_start;
+	unsigned long reject_end;
+
+	unsigned long count;
+};
+
+#define FAULT_ATTR_INITIALIZER {				\
+		.interval = 1,					\
+		.times = ATOMIC_INIT(1),			\
+		.require_end = ULONG_MAX,			\
+		.stacktrace_depth = 32,				\
+		.verbose = 2,					\
+	}
+
+#define DECLARE_FAULT_ATTR(name) struct fault_attr name = FAULT_ATTR_INITIALIZER
+int setup_fault_attr(struct fault_attr *attr, char *str);
+bool should_fail(struct fault_attr *attr, ssize_t size);
+
+#ifdef CONFIG_FAULT_INJECTION_DEBUG_FS
+
+struct dentry *fault_create_debugfs_attr(const char *name,
+			struct dentry *parent, struct fault_attr *attr);
+
+#else /* CONFIG_FAULT_INJECTION_DEBUG_FS */
+
+static inline struct dentry *fault_create_debugfs_attr(const char *name,
+			struct dentry *parent, struct fault_attr *attr)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+#endif /* CONFIG_FAULT_INJECTION_DEBUG_FS */
+
+#endif /* CONFIG_FAULT_INJECTION */
+
+#ifdef CONFIG_FAILSLAB
+extern bool should_failslab(size_t size, gfp_t gfpflags, unsigned long flags);
+#else
+static inline bool should_failslab(size_t size, gfp_t gfpflags,
+				unsigned long flags)
+{
+	return false;
+}
+#endif /* CONFIG_FAILSLAB */
+
+#endif /* _LINUX_FAULT_INJECT_H */
diff --git a/include/linux/fb.h b/include/linux/fb.h
new file mode 100644
index 00000000..d31cb682
--- /dev/null
+++ b/include/linux/fb.h
@@ -0,0 +1,1181 @@
+#ifndef _LINUX_FB_H
+#define _LINUX_FB_H
+
+#include <linux/types.h>
+#include <linux/i2c.h>
+#ifdef __KERNEL__
+#include <linux/kgdb.h>
+#endif /* __KERNEL__ */
+
+/* Definitions of frame buffers						*/
+
+#define FB_MAX			32	/* sufficient for now */
+
+/* ioctls
+   0x46 is 'F'								*/
+#define FBIOGET_VSCREENINFO	0x4600
+#define FBIOPUT_VSCREENINFO	0x4601
+#define FBIOGET_FSCREENINFO	0x4602
+#define FBIOGETCMAP		0x4604
+#define FBIOPUTCMAP		0x4605
+#define FBIOPAN_DISPLAY		0x4606
+#ifdef __KERNEL__
+#define FBIO_CURSOR            _IOWR('F', 0x08, struct fb_cursor_user)
+#else
+#define FBIO_CURSOR            _IOWR('F', 0x08, struct fb_cursor)
+#endif
+/* 0x4607-0x460B are defined below */
+/* #define FBIOGET_MONITORSPEC	0x460C */
+/* #define FBIOPUT_MONITORSPEC	0x460D */
+/* #define FBIOSWITCH_MONIBIT	0x460E */
+#define FBIOGET_CON2FBMAP	0x460F
+#define FBIOPUT_CON2FBMAP	0x4610
+#define FBIOBLANK		0x4611		/* arg: 0 or vesa level + 1 */
+#define FBIOGET_VBLANK		_IOR('F', 0x12, struct fb_vblank)
+#define FBIO_ALLOC              0x4613
+#define FBIO_FREE               0x4614
+#define FBIOGET_GLYPH           0x4615
+#define FBIOGET_HWCINFO         0x4616
+#define FBIOPUT_MODEINFO        0x4617
+#define FBIOGET_DISPINFO        0x4618
+#define FBIO_WAITFORVSYNC	_IOW('F', 0x20, __u32)
+
+#define FB_TYPE_PACKED_PIXELS		0	/* Packed Pixels	*/
+#define FB_TYPE_PLANES			1	/* Non interleaved planes */
+#define FB_TYPE_INTERLEAVED_PLANES	2	/* Interleaved planes	*/
+#define FB_TYPE_TEXT			3	/* Text/attributes	*/
+#define FB_TYPE_VGA_PLANES		4	/* EGA/VGA planes	*/
+#define FB_TYPE_FOURCC			5	/* Type identified by a V4L2 FOURCC */
+
+#define FB_AUX_TEXT_MDA		0	/* Monochrome text */
+#define FB_AUX_TEXT_CGA		1	/* CGA/EGA/VGA Color text */
+#define FB_AUX_TEXT_S3_MMIO	2	/* S3 MMIO fasttext */
+#define FB_AUX_TEXT_MGA_STEP16	3	/* MGA Millenium I: text, attr, 14 reserved bytes */
+#define FB_AUX_TEXT_MGA_STEP8	4	/* other MGAs:      text, attr,  6 reserved bytes */
+#define FB_AUX_TEXT_SVGA_GROUP	8	/* 8-15: SVGA tileblit compatible modes */
+#define FB_AUX_TEXT_SVGA_MASK	7	/* lower three bits says step */
+#define FB_AUX_TEXT_SVGA_STEP2	8	/* SVGA text mode:  text, attr */
+#define FB_AUX_TEXT_SVGA_STEP4	9	/* SVGA text mode:  text, attr,  2 reserved bytes */
+#define FB_AUX_TEXT_SVGA_STEP8	10	/* SVGA text mode:  text, attr,  6 reserved bytes */
+#define FB_AUX_TEXT_SVGA_STEP16	11	/* SVGA text mode:  text, attr, 14 reserved bytes */
+#define FB_AUX_TEXT_SVGA_LAST	15	/* reserved up to 15 */
+
+#define FB_AUX_VGA_PLANES_VGA4		0	/* 16 color planes (EGA/VGA) */
+#define FB_AUX_VGA_PLANES_CFB4		1	/* CFB4 in planes (VGA) */
+#define FB_AUX_VGA_PLANES_CFB8		2	/* CFB8 in planes (VGA) */
+
+#define FB_VISUAL_MONO01		0	/* Monochr. 1=Black 0=White */
+#define FB_VISUAL_MONO10		1	/* Monochr. 1=White 0=Black */
+#define FB_VISUAL_TRUECOLOR		2	/* True color	*/
+#define FB_VISUAL_PSEUDOCOLOR		3	/* Pseudo color (like atari) */
+#define FB_VISUAL_DIRECTCOLOR		4	/* Direct color */
+#define FB_VISUAL_STATIC_PSEUDOCOLOR	5	/* Pseudo color readonly */
+#define FB_VISUAL_FOURCC		6	/* Visual identified by a V4L2 FOURCC */
+
+#define FB_ACCEL_NONE		0	/* no hardware accelerator	*/
+#define FB_ACCEL_ATARIBLITT	1	/* Atari Blitter		*/
+#define FB_ACCEL_AMIGABLITT	2	/* Amiga Blitter                */
+#define FB_ACCEL_S3_TRIO64	3	/* Cybervision64 (S3 Trio64)    */
+#define FB_ACCEL_NCR_77C32BLT	4	/* RetinaZ3 (NCR 77C32BLT)      */
+#define FB_ACCEL_S3_VIRGE	5	/* Cybervision64/3D (S3 ViRGE)	*/
+#define FB_ACCEL_ATI_MACH64GX	6	/* ATI Mach 64GX family		*/
+#define FB_ACCEL_DEC_TGA	7	/* DEC 21030 TGA		*/
+#define FB_ACCEL_ATI_MACH64CT	8	/* ATI Mach 64CT family		*/
+#define FB_ACCEL_ATI_MACH64VT	9	/* ATI Mach 64CT family VT class */
+#define FB_ACCEL_ATI_MACH64GT	10	/* ATI Mach 64CT family GT class */
+#define FB_ACCEL_SUN_CREATOR	11	/* Sun Creator/Creator3D	*/
+#define FB_ACCEL_SUN_CGSIX	12	/* Sun cg6			*/
+#define FB_ACCEL_SUN_LEO	13	/* Sun leo/zx			*/
+#define FB_ACCEL_IMS_TWINTURBO	14	/* IMS Twin Turbo		*/
+#define FB_ACCEL_3DLABS_PERMEDIA2 15	/* 3Dlabs Permedia 2		*/
+#define FB_ACCEL_MATROX_MGA2064W 16	/* Matrox MGA2064W (Millenium)	*/
+#define FB_ACCEL_MATROX_MGA1064SG 17	/* Matrox MGA1064SG (Mystique)	*/
+#define FB_ACCEL_MATROX_MGA2164W 18	/* Matrox MGA2164W (Millenium II) */
+#define FB_ACCEL_MATROX_MGA2164W_AGP 19	/* Matrox MGA2164W (Millenium II) */
+#define FB_ACCEL_MATROX_MGAG100	20	/* Matrox G100 (Productiva G100) */
+#define FB_ACCEL_MATROX_MGAG200	21	/* Matrox G200 (Myst, Mill, ...) */
+#define FB_ACCEL_SUN_CG14	22	/* Sun cgfourteen		 */
+#define FB_ACCEL_SUN_BWTWO	23	/* Sun bwtwo			*/
+#define FB_ACCEL_SUN_CGTHREE	24	/* Sun cgthree			*/
+#define FB_ACCEL_SUN_TCX	25	/* Sun tcx			*/
+#define FB_ACCEL_MATROX_MGAG400	26	/* Matrox G400			*/
+#define FB_ACCEL_NV3		27	/* nVidia RIVA 128              */
+#define FB_ACCEL_NV4		28	/* nVidia RIVA TNT		*/
+#define FB_ACCEL_NV5		29	/* nVidia RIVA TNT2		*/
+#define FB_ACCEL_CT_6555x	30	/* C&T 6555x			*/
+#define FB_ACCEL_3DFX_BANSHEE	31	/* 3Dfx Banshee			*/
+#define FB_ACCEL_ATI_RAGE128	32	/* ATI Rage128 family		*/
+#define FB_ACCEL_IGS_CYBER2000	33	/* CyberPro 2000		*/
+#define FB_ACCEL_IGS_CYBER2010	34	/* CyberPro 2010		*/
+#define FB_ACCEL_IGS_CYBER5000	35	/* CyberPro 5000		*/
+#define FB_ACCEL_SIS_GLAMOUR    36	/* SiS 300/630/540              */
+#define FB_ACCEL_3DLABS_PERMEDIA3 37	/* 3Dlabs Permedia 3		*/
+#define FB_ACCEL_ATI_RADEON	38	/* ATI Radeon family		*/
+#define FB_ACCEL_I810           39      /* Intel 810/815                */
+#define FB_ACCEL_SIS_GLAMOUR_2  40	/* SiS 315, 650, 740		*/
+#define FB_ACCEL_SIS_XABRE      41	/* SiS 330 ("Xabre")		*/
+#define FB_ACCEL_I830           42      /* Intel 830M/845G/85x/865G     */
+#define FB_ACCEL_NV_10          43      /* nVidia Arch 10               */
+#define FB_ACCEL_NV_20          44      /* nVidia Arch 20               */
+#define FB_ACCEL_NV_30          45      /* nVidia Arch 30               */
+#define FB_ACCEL_NV_40          46      /* nVidia Arch 40               */
+#define FB_ACCEL_XGI_VOLARI_V	47	/* XGI Volari V3XT, V5, V8      */
+#define FB_ACCEL_XGI_VOLARI_Z	48	/* XGI Volari Z7                */
+#define FB_ACCEL_OMAP1610	49	/* TI OMAP16xx                  */
+#define FB_ACCEL_TRIDENT_TGUI	50	/* Trident TGUI			*/
+#define FB_ACCEL_TRIDENT_3DIMAGE 51	/* Trident 3DImage		*/
+#define FB_ACCEL_TRIDENT_BLADE3D 52	/* Trident Blade3D		*/
+#define FB_ACCEL_TRIDENT_BLADEXP 53	/* Trident BladeXP		*/
+#define FB_ACCEL_CIRRUS_ALPINE   53	/* Cirrus Logic 543x/544x/5480	*/
+#define FB_ACCEL_NEOMAGIC_NM2070 90	/* NeoMagic NM2070              */
+#define FB_ACCEL_NEOMAGIC_NM2090 91	/* NeoMagic NM2090              */
+#define FB_ACCEL_NEOMAGIC_NM2093 92	/* NeoMagic NM2093              */
+#define FB_ACCEL_NEOMAGIC_NM2097 93	/* NeoMagic NM2097              */
+#define FB_ACCEL_NEOMAGIC_NM2160 94	/* NeoMagic NM2160              */
+#define FB_ACCEL_NEOMAGIC_NM2200 95	/* NeoMagic NM2200              */
+#define FB_ACCEL_NEOMAGIC_NM2230 96	/* NeoMagic NM2230              */
+#define FB_ACCEL_NEOMAGIC_NM2360 97	/* NeoMagic NM2360              */
+#define FB_ACCEL_NEOMAGIC_NM2380 98	/* NeoMagic NM2380              */
+#define FB_ACCEL_PXA3XX		 99	/* PXA3xx			*/
+
+#define FB_ACCEL_SAVAGE4        0x80	/* S3 Savage4                   */
+#define FB_ACCEL_SAVAGE3D       0x81	/* S3 Savage3D                  */
+#define FB_ACCEL_SAVAGE3D_MV    0x82	/* S3 Savage3D-MV               */
+#define FB_ACCEL_SAVAGE2000     0x83	/* S3 Savage2000                */
+#define FB_ACCEL_SAVAGE_MX_MV   0x84	/* S3 Savage/MX-MV              */
+#define FB_ACCEL_SAVAGE_MX      0x85	/* S3 Savage/MX                 */
+#define FB_ACCEL_SAVAGE_IX_MV   0x86	/* S3 Savage/IX-MV              */
+#define FB_ACCEL_SAVAGE_IX      0x87	/* S3 Savage/IX                 */
+#define FB_ACCEL_PROSAVAGE_PM   0x88	/* S3 ProSavage PM133           */
+#define FB_ACCEL_PROSAVAGE_KM   0x89	/* S3 ProSavage KM133           */
+#define FB_ACCEL_S3TWISTER_P    0x8a	/* S3 Twister                   */
+#define FB_ACCEL_S3TWISTER_K    0x8b	/* S3 TwisterK                  */
+#define FB_ACCEL_SUPERSAVAGE    0x8c    /* S3 Supersavage               */
+#define FB_ACCEL_PROSAVAGE_DDR  0x8d	/* S3 ProSavage DDR             */
+#define FB_ACCEL_PROSAVAGE_DDRK 0x8e	/* S3 ProSavage DDR-K           */
+
+#define FB_ACCEL_PUV3_UNIGFX	0xa0	/* PKUnity-v3 Unigfx		*/
+
+#define FB_CAP_FOURCC		1	/* Device supports FOURCC-based formats */
+
+struct fb_fix_screeninfo {
+	char id[16];			/* identification string eg "TT Builtin" */
+	unsigned long smem_start;	/* Start of frame buffer mem */
+					/* (physical address) */
+	__u32 smem_len;			/* Length of frame buffer mem */
+	__u32 type;			/* see FB_TYPE_*		*/
+	__u32 type_aux;			/* Interleave for interleaved Planes */
+	__u32 visual;			/* see FB_VISUAL_*		*/ 
+	__u16 xpanstep;			/* zero if no hardware panning  */
+	__u16 ypanstep;			/* zero if no hardware panning  */
+	__u16 ywrapstep;		/* zero if no hardware ywrap    */
+	__u32 line_length;		/* length of a line in bytes    */
+	unsigned long mmio_start;	/* Start of Memory Mapped I/O   */
+					/* (physical address) */
+	__u32 mmio_len;			/* Length of Memory Mapped I/O  */
+	__u32 accel;			/* Indicate to driver which	*/
+					/*  specific chip/card we have	*/
+	__u16 capabilities;		/* see FB_CAP_*			*/
+	__u16 reserved[2];		/* Reserved for future compatibility */
+};
+
+/* Interpretation of offset for color fields: All offsets are from the right,
+ * inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you
+ * can use the offset as right argument to <<). A pixel afterwards is a bit
+ * stream and is written to video memory as that unmodified.
+ *
+ * For pseudocolor: offset and length should be the same for all color
+ * components. Offset specifies the position of the least significant bit
+ * of the pallette index in a pixel value. Length indicates the number
+ * of available palette entries (i.e. # of entries = 1 << length).
+ */
+struct fb_bitfield {
+	__u32 offset;			/* beginning of bitfield	*/
+	__u32 length;			/* length of bitfield		*/
+	__u32 msb_right;		/* != 0 : Most significant bit is */ 
+					/* right */ 
+};
+
+#define FB_NONSTD_HAM		1	/* Hold-And-Modify (HAM)        */
+#define FB_NONSTD_REV_PIX_IN_B	2	/* order of pixels in each byte is reversed */
+
+#define FB_ACTIVATE_NOW		0	/* set values immediately (or vbl)*/
+#define FB_ACTIVATE_NXTOPEN	1	/* activate on next open	*/
+#define FB_ACTIVATE_TEST	2	/* don't set, round up impossible */
+#define FB_ACTIVATE_MASK       15
+					/* values			*/
+#define FB_ACTIVATE_VBL	       16	/* activate values on next vbl  */
+#define FB_CHANGE_CMAP_VBL     32	/* change colormap on vbl	*/
+#define FB_ACTIVATE_ALL	       64	/* change all VCs on this fb	*/
+#define FB_ACTIVATE_FORCE     128	/* force apply even when no change*/
+#define FB_ACTIVATE_INV_MODE  256       /* invalidate videomode */
+
+#define FB_ACCELF_TEXT		1	/* (OBSOLETE) see fb_info.flags and vc_mode */
+
+#define FB_SYNC_HOR_HIGH_ACT	1	/* horizontal sync high active	*/
+#define FB_SYNC_VERT_HIGH_ACT	2	/* vertical sync high active	*/
+#define FB_SYNC_EXT		4	/* external sync		*/
+#define FB_SYNC_COMP_HIGH_ACT	8	/* composite sync high active   */
+#define FB_SYNC_BROADCAST	16	/* broadcast video timings      */
+					/* vtotal = 144d/288n/576i => PAL  */
+					/* vtotal = 121d/242n/484i => NTSC */
+#define FB_SYNC_ON_GREEN	32	/* sync on green */
+
+#define FB_VMODE_NONINTERLACED  0	/* non interlaced */
+#define FB_VMODE_INTERLACED	1	/* interlaced	*/
+#define FB_VMODE_DOUBLE		2	/* double scan */
+#define FB_VMODE_ODD_FLD_FIRST	4	/* interlaced: top line first */
+#define FB_VMODE_MASK		255
+
+#define FB_VMODE_YWRAP		256	/* ywrap instead of panning     */
+#define FB_VMODE_SMOOTH_XPAN	512	/* smooth xpan possible (internally used) */
+#define FB_VMODE_CONUPDATE	512	/* don't update x/yoffset	*/
+
+/*
+ * Display rotation support
+ */
+#define FB_ROTATE_UR      0
+#define FB_ROTATE_CW      1
+#define FB_ROTATE_UD      2
+#define FB_ROTATE_CCW     3
+
+#define PICOS2KHZ(a) (1000000000UL/(a))
+#define KHZ2PICOS(a) (1000000000UL/(a))
+
+struct fb_var_screeninfo {
+	__u32 xres;			/* visible resolution		*/
+	__u32 yres;
+	__u32 xres_virtual;		/* virtual resolution		*/
+	__u32 yres_virtual;
+	__u32 xoffset;			/* offset from virtual to visible */
+	__u32 yoffset;			/* resolution			*/
+
+	__u32 bits_per_pixel;		/* guess what			*/
+	__u32 grayscale;		/* 0 = color, 1 = grayscale,	*/
+					/* >1 = FOURCC			*/
+	struct fb_bitfield red;		/* bitfield in fb mem if true color, */
+	struct fb_bitfield green;	/* else only length is significant */
+	struct fb_bitfield blue;
+	struct fb_bitfield transp;	/* transparency			*/	
+
+	__u32 nonstd;			/* != 0 Non standard pixel format */
+
+	__u32 activate;			/* see FB_ACTIVATE_*		*/
+
+	__u32 height;			/* height of picture in mm    */
+	__u32 width;			/* width of picture in mm     */
+
+	__u32 accel_flags;		/* (OBSOLETE) see fb_info.flags */
+
+	/* Timing: All values in pixclocks, except pixclock (of course) */
+	__u32 pixclock;			/* pixel clock in ps (pico seconds) */
+	__u32 left_margin;		/* time from sync to picture	*/
+	__u32 right_margin;		/* time from picture to sync	*/
+	__u32 upper_margin;		/* time from sync to picture	*/
+	__u32 lower_margin;
+	__u32 hsync_len;		/* length of horizontal sync	*/
+	__u32 vsync_len;		/* length of vertical sync	*/
+	__u32 sync;			/* see FB_SYNC_*		*/
+	__u32 vmode;			/* see FB_VMODE_*		*/
+	__u32 rotate;			/* angle we rotate counter clockwise */
+	__u32 colorspace;		/* colorspace for FOURCC-based modes */
+	__u32 reserved[4];		/* Reserved for future compatibility */
+};
+
+struct fb_cmap {
+	__u32 start;			/* First entry	*/
+	__u32 len;			/* Number of entries */
+	__u16 *red;			/* Red values	*/
+	__u16 *green;
+	__u16 *blue;
+	__u16 *transp;			/* transparency, can be NULL */
+};
+
+struct fb_con2fbmap {
+	__u32 console;
+	__u32 framebuffer;
+};
+
+/* VESA Blanking Levels */
+#define VESA_NO_BLANKING        0
+#define VESA_VSYNC_SUSPEND      1
+#define VESA_HSYNC_SUSPEND      2
+#define VESA_POWERDOWN          3
+
+
+enum {
+	/* screen: unblanked, hsync: on,  vsync: on */
+	FB_BLANK_UNBLANK       = VESA_NO_BLANKING,
+
+	/* screen: blanked,   hsync: on,  vsync: on */
+	FB_BLANK_NORMAL        = VESA_NO_BLANKING + 1,
+
+	/* screen: blanked,   hsync: on,  vsync: off */
+	FB_BLANK_VSYNC_SUSPEND = VESA_VSYNC_SUSPEND + 1,
+
+	/* screen: blanked,   hsync: off, vsync: on */
+	FB_BLANK_HSYNC_SUSPEND = VESA_HSYNC_SUSPEND + 1,
+
+	/* screen: blanked,   hsync: off, vsync: off */
+	FB_BLANK_POWERDOWN     = VESA_POWERDOWN + 1
+};
+
+#define FB_VBLANK_VBLANKING	0x001	/* currently in a vertical blank */
+#define FB_VBLANK_HBLANKING	0x002	/* currently in a horizontal blank */
+#define FB_VBLANK_HAVE_VBLANK	0x004	/* vertical blanks can be detected */
+#define FB_VBLANK_HAVE_HBLANK	0x008	/* horizontal blanks can be detected */
+#define FB_VBLANK_HAVE_COUNT	0x010	/* global retrace counter is available */
+#define FB_VBLANK_HAVE_VCOUNT	0x020	/* the vcount field is valid */
+#define FB_VBLANK_HAVE_HCOUNT	0x040	/* the hcount field is valid */
+#define FB_VBLANK_VSYNCING	0x080	/* currently in a vsync */
+#define FB_VBLANK_HAVE_VSYNC	0x100	/* verical syncs can be detected */
+
+struct fb_vblank {
+	__u32 flags;			/* FB_VBLANK flags */
+	__u32 count;			/* counter of retraces since boot */
+	__u32 vcount;			/* current scanline position */
+	__u32 hcount;			/* current scandot position */
+	__u32 reserved[4];		/* reserved for future compatibility */
+};
+
+/* Internal HW accel */
+#define ROP_COPY 0
+#define ROP_XOR  1
+
+struct fb_copyarea {
+	__u32 dx;
+	__u32 dy;
+	__u32 width;
+	__u32 height;
+	__u32 sx;
+	__u32 sy;
+};
+
+struct fb_fillrect {
+	__u32 dx;	/* screen-relative */
+	__u32 dy;
+	__u32 width;
+	__u32 height;
+	__u32 color;
+	__u32 rop;
+};
+
+struct fb_image {
+	__u32 dx;		/* Where to place image */
+	__u32 dy;
+	__u32 width;		/* Size of image */
+	__u32 height;
+	__u32 fg_color;		/* Only used when a mono bitmap */
+	__u32 bg_color;
+	__u8  depth;		/* Depth of the image */
+	const char *data;	/* Pointer to image data */
+	struct fb_cmap cmap;	/* color map info */
+};
+
+/*
+ * hardware cursor control
+ */
+
+#define FB_CUR_SETIMAGE 0x01
+#define FB_CUR_SETPOS   0x02
+#define FB_CUR_SETHOT   0x04
+#define FB_CUR_SETCMAP  0x08
+#define FB_CUR_SETSHAPE 0x10
+#define FB_CUR_SETSIZE	0x20
+#define FB_CUR_SETALL   0xFF
+
+struct fbcurpos {
+	__u16 x, y;
+};
+
+struct fb_cursor {
+	__u16 set;		/* what to set */
+	__u16 enable;		/* cursor on/off */
+	__u16 rop;		/* bitop operation */
+	const char *mask;	/* cursor mask bits */
+	struct fbcurpos hot;	/* cursor hot spot */
+	struct fb_image	image;	/* Cursor image */
+};
+
+#ifdef CONFIG_FB_BACKLIGHT
+/* Settings for the generic backlight code */
+#define FB_BACKLIGHT_LEVELS	128
+#define FB_BACKLIGHT_MAX	0xFF
+#endif
+
+#ifdef __KERNEL__
+
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/workqueue.h>
+#include <linux/notifier.h>
+#include <linux/list.h>
+#include <linux/backlight.h>
+#include <linux/slab.h>
+#include <asm/io.h>
+
+struct vm_area_struct;
+struct fb_info;
+struct device;
+struct file;
+
+/* Definitions below are used in the parsed monitor specs */
+#define FB_DPMS_ACTIVE_OFF	1
+#define FB_DPMS_SUSPEND		2
+#define FB_DPMS_STANDBY		4
+
+#define FB_DISP_DDI		1
+#define FB_DISP_ANA_700_300	2
+#define FB_DISP_ANA_714_286	4
+#define FB_DISP_ANA_1000_400	8
+#define FB_DISP_ANA_700_000	16
+
+#define FB_DISP_MONO		32
+#define FB_DISP_RGB		64
+#define FB_DISP_MULTI		128
+#define FB_DISP_UNKNOWN		256
+
+#define FB_SIGNAL_NONE		0
+#define FB_SIGNAL_BLANK_BLANK	1
+#define FB_SIGNAL_SEPARATE	2
+#define FB_SIGNAL_COMPOSITE	4
+#define FB_SIGNAL_SYNC_ON_GREEN	8
+#define FB_SIGNAL_SERRATION_ON	16
+
+#define FB_MISC_PRIM_COLOR	1
+#define FB_MISC_1ST_DETAIL	2	/* First Detailed Timing is preferred */
+struct fb_chroma {
+	__u32 redx;	/* in fraction of 1024 */
+	__u32 greenx;
+	__u32 bluex;
+	__u32 whitex;
+	__u32 redy;
+	__u32 greeny;
+	__u32 bluey;
+	__u32 whitey;
+};
+
+struct fb_monspecs {
+	struct fb_chroma chroma;
+	struct fb_videomode *modedb;	/* mode database */
+	__u8  manufacturer[4];		/* Manufacturer */
+	__u8  monitor[14];		/* Monitor String */
+	__u8  serial_no[14];		/* Serial Number */
+	__u8  ascii[14];		/* ? */
+	__u32 modedb_len;		/* mode database length */
+	__u32 model;			/* Monitor Model */
+	__u32 serial;			/* Serial Number - Integer */
+	__u32 year;			/* Year manufactured */
+	__u32 week;			/* Week Manufactured */
+	__u32 hfmin;			/* hfreq lower limit (Hz) */
+	__u32 hfmax;			/* hfreq upper limit (Hz) */
+	__u32 dclkmin;			/* pixelclock lower limit (Hz) */
+	__u32 dclkmax;			/* pixelclock upper limit (Hz) */
+	__u16 input;			/* display type - see FB_DISP_* */
+	__u16 dpms;			/* DPMS support - see FB_DPMS_ */
+	__u16 signal;			/* Signal Type - see FB_SIGNAL_* */
+	__u16 vfmin;			/* vfreq lower limit (Hz) */
+	__u16 vfmax;			/* vfreq upper limit (Hz) */
+	__u16 gamma;			/* Gamma - in fractions of 100 */
+	__u16 gtf	: 1;		/* supports GTF */
+	__u16 misc;			/* Misc flags - see FB_MISC_* */
+	__u8  version;			/* EDID version... */
+	__u8  revision;			/* ...and revision */
+	__u8  max_x;			/* Maximum horizontal size (cm) */
+	__u8  max_y;			/* Maximum vertical size (cm) */
+};
+
+struct fb_cmap_user {
+	__u32 start;			/* First entry	*/
+	__u32 len;			/* Number of entries */
+	__u16 __user *red;		/* Red values	*/
+	__u16 __user *green;
+	__u16 __user *blue;
+	__u16 __user *transp;		/* transparency, can be NULL */
+};
+
+struct fb_image_user {
+	__u32 dx;			/* Where to place image */
+	__u32 dy;
+	__u32 width;			/* Size of image */
+	__u32 height;
+	__u32 fg_color;			/* Only used when a mono bitmap */
+	__u32 bg_color;
+	__u8  depth;			/* Depth of the image */
+	const char __user *data;	/* Pointer to image data */
+	struct fb_cmap_user cmap;	/* color map info */
+};
+
+struct fb_cursor_user {
+	__u16 set;			/* what to set */
+	__u16 enable;			/* cursor on/off */
+	__u16 rop;			/* bitop operation */
+	const char __user *mask;	/* cursor mask bits */
+	struct fbcurpos hot;		/* cursor hot spot */
+	struct fb_image_user image;	/* Cursor image */
+};
+
+/*
+ * Register/unregister for framebuffer events
+ */
+
+/*	The resolution of the passed in fb_info about to change */ 
+#define FB_EVENT_MODE_CHANGE		0x01
+/*	The display on this fb_info is beeing suspended, no access to the
+ *	framebuffer is allowed any more after that call returns
+ */
+#define FB_EVENT_SUSPEND		0x02
+/*	The display on this fb_info was resumed, you can restore the display
+ *	if you own it
+ */
+#define FB_EVENT_RESUME			0x03
+/*      An entry from the modelist was removed */
+#define FB_EVENT_MODE_DELETE            0x04
+/*      A driver registered itself */
+#define FB_EVENT_FB_REGISTERED          0x05
+/*      A driver unregistered itself */
+#define FB_EVENT_FB_UNREGISTERED        0x06
+/*      CONSOLE-SPECIFIC: get console to framebuffer mapping */
+#define FB_EVENT_GET_CONSOLE_MAP        0x07
+/*      CONSOLE-SPECIFIC: set console to framebuffer mapping */
+#define FB_EVENT_SET_CONSOLE_MAP        0x08
+/*      A hardware display blank change occurred */
+#define FB_EVENT_BLANK                  0x09
+/*      Private modelist is to be replaced */
+#define FB_EVENT_NEW_MODELIST           0x0A
+/*	The resolution of the passed in fb_info about to change and
+        all vc's should be changed         */
+#define FB_EVENT_MODE_CHANGE_ALL	0x0B
+/*	A software display blank change occurred */
+#define FB_EVENT_CONBLANK               0x0C
+/*      Get drawing requirements        */
+#define FB_EVENT_GET_REQ                0x0D
+/*      Unbind from the console if possible */
+#define FB_EVENT_FB_UNBIND              0x0E
+/*      CONSOLE-SPECIFIC: remap all consoles to new fb - for vga switcheroo */
+#define FB_EVENT_REMAP_ALL_CONSOLE      0x0F
+
+struct fb_event {
+	struct fb_info *info;
+	void *data;
+};
+
+struct fb_blit_caps {
+	u32 x;
+	u32 y;
+	u32 len;
+	u32 flags;
+};
+
+extern int fb_register_client(struct notifier_block *nb);
+extern int fb_unregister_client(struct notifier_block *nb);
+extern int fb_notifier_call_chain(unsigned long val, void *v);
+/*
+ * Pixmap structure definition
+ *
+ * The purpose of this structure is to translate data
+ * from the hardware independent format of fbdev to what
+ * format the hardware needs.
+ */
+
+#define FB_PIXMAP_DEFAULT 1     /* used internally by fbcon */
+#define FB_PIXMAP_SYSTEM  2     /* memory is in system RAM  */
+#define FB_PIXMAP_IO      4     /* memory is iomapped       */
+#define FB_PIXMAP_SYNC    256   /* set if GPU can DMA       */
+
+struct fb_pixmap {
+	u8  *addr;		/* pointer to memory			*/
+	u32 size;		/* size of buffer in bytes		*/
+	u32 offset;		/* current offset to buffer		*/
+	u32 buf_align;		/* byte alignment of each bitmap	*/
+	u32 scan_align;		/* alignment per scanline		*/
+	u32 access_align;	/* alignment per read/write (bits)	*/
+	u32 flags;		/* see FB_PIXMAP_*			*/
+	u32 blit_x;             /* supported bit block dimensions (1-32)*/
+	u32 blit_y;             /* Format: blit_x = 1 << (width - 1)    */
+	                        /*         blit_y = 1 << (height - 1)   */
+	                        /* if 0, will be set to 0xffffffff (all)*/
+	/* access methods */
+	void (*writeio)(struct fb_info *info, void __iomem *dst, void *src, unsigned int size);
+	void (*readio) (struct fb_info *info, void *dst, void __iomem *src, unsigned int size);
+};
+
+#ifdef CONFIG_FB_DEFERRED_IO
+struct fb_deferred_io {
+	/* delay between mkwrite and deferred handler */
+	unsigned long delay;
+	struct mutex lock; /* mutex that protects the page list */
+	struct list_head pagelist; /* list of touched pages */
+	/* callback */
+	void (*deferred_io)(struct fb_info *info, struct list_head *pagelist);
+};
+#endif
+
+/*
+ * Frame buffer operations
+ *
+ * LOCKING NOTE: those functions must _ALL_ be called with the console
+ * semaphore held, this is the only suitable locking mechanism we have
+ * in 2.6. Some may be called at interrupt time at this point though.
+ *
+ * The exception to this is the debug related hooks.  Putting the fb
+ * into a debug state (e.g. flipping to the kernel console) and restoring
+ * it must be done in a lock-free manner, so low level drivers should
+ * keep track of the initial console (if applicable) and may need to
+ * perform direct, unlocked hardware writes in these hooks.
+ */
+
+struct fb_ops {
+	/* open/release and usage marking */
+	struct module *owner;
+	int (*fb_open)(struct fb_info *info, int user);
+	int (*fb_release)(struct fb_info *info, int user);
+
+	/* For framebuffers with strange non linear layouts or that do not
+	 * work with normal memory mapped access
+	 */
+	ssize_t (*fb_read)(struct fb_info *info, char __user *buf,
+			   size_t count, loff_t *ppos);
+	ssize_t (*fb_write)(struct fb_info *info, const char __user *buf,
+			    size_t count, loff_t *ppos);
+
+	/* checks var and eventually tweaks it to something supported,
+	 * DO NOT MODIFY PAR */
+	int (*fb_check_var)(struct fb_var_screeninfo *var, struct fb_info *info);
+
+	/* set the video mode according to info->var */
+	int (*fb_set_par)(struct fb_info *info);
+
+	/* set color register */
+	int (*fb_setcolreg)(unsigned regno, unsigned red, unsigned green,
+			    unsigned blue, unsigned transp, struct fb_info *info);
+
+	/* set color registers in batch */
+	int (*fb_setcmap)(struct fb_cmap *cmap, struct fb_info *info);
+
+	/* blank display */
+	int (*fb_blank)(int blank, struct fb_info *info);
+
+	/* pan display */
+	int (*fb_pan_display)(struct fb_var_screeninfo *var, struct fb_info *info);
+
+	/* Draws a rectangle */
+	void (*fb_fillrect) (struct fb_info *info, const struct fb_fillrect *rect);
+	/* Copy data from area to another */
+	void (*fb_copyarea) (struct fb_info *info, const struct fb_copyarea *region);
+	/* Draws a image to the display */
+	void (*fb_imageblit) (struct fb_info *info, const struct fb_image *image);
+
+	/* Draws cursor */
+	int (*fb_cursor) (struct fb_info *info, struct fb_cursor *cursor);
+
+	/* Rotates the display */
+	void (*fb_rotate)(struct fb_info *info, int angle);
+
+	/* wait for blit idle, optional */
+	int (*fb_sync)(struct fb_info *info);
+
+	/* perform fb specific ioctl (optional) */
+	int (*fb_ioctl)(struct fb_info *info, unsigned int cmd,
+			unsigned long arg);
+
+	/* Handle 32bit compat ioctl (optional) */
+	int (*fb_compat_ioctl)(struct fb_info *info, unsigned cmd,
+			unsigned long arg);
+
+	/* perform fb specific mmap */
+	int (*fb_mmap)(struct fb_info *info, struct vm_area_struct *vma);
+
+	/* get capability given var */
+	void (*fb_get_caps)(struct fb_info *info, struct fb_blit_caps *caps,
+			    struct fb_var_screeninfo *var);
+
+	/* teardown any resources to do with this framebuffer */
+	void (*fb_destroy)(struct fb_info *info);
+
+	/* called at KDB enter and leave time to prepare the console */
+	int (*fb_debug_enter)(struct fb_info *info);
+	int (*fb_debug_leave)(struct fb_info *info);
+};
+
+#ifdef CONFIG_FB_TILEBLITTING
+#define FB_TILE_CURSOR_NONE        0
+#define FB_TILE_CURSOR_UNDERLINE   1
+#define FB_TILE_CURSOR_LOWER_THIRD 2
+#define FB_TILE_CURSOR_LOWER_HALF  3
+#define FB_TILE_CURSOR_TWO_THIRDS  4
+#define FB_TILE_CURSOR_BLOCK       5
+
+struct fb_tilemap {
+	__u32 width;                /* width of each tile in pixels */
+	__u32 height;               /* height of each tile in scanlines */
+	__u32 depth;                /* color depth of each tile */
+	__u32 length;               /* number of tiles in the map */
+	const __u8 *data;           /* actual tile map: a bitmap array, packed
+				       to the nearest byte */
+};
+
+struct fb_tilerect {
+	__u32 sx;                   /* origin in the x-axis */
+	__u32 sy;                   /* origin in the y-axis */
+	__u32 width;                /* number of tiles in the x-axis */
+	__u32 height;               /* number of tiles in the y-axis */
+	__u32 index;                /* what tile to use: index to tile map */
+	__u32 fg;                   /* foreground color */
+	__u32 bg;                   /* background color */
+	__u32 rop;                  /* raster operation */
+};
+
+struct fb_tilearea {
+	__u32 sx;                   /* source origin in the x-axis */
+	__u32 sy;                   /* source origin in the y-axis */
+	__u32 dx;                   /* destination origin in the x-axis */
+	__u32 dy;                   /* destination origin in the y-axis */
+	__u32 width;                /* number of tiles in the x-axis */
+	__u32 height;               /* number of tiles in the y-axis */
+};
+
+struct fb_tileblit {
+	__u32 sx;                   /* origin in the x-axis */
+	__u32 sy;                   /* origin in the y-axis */
+	__u32 width;                /* number of tiles in the x-axis */
+	__u32 height;               /* number of tiles in the y-axis */
+	__u32 fg;                   /* foreground color */
+	__u32 bg;                   /* background color */
+	__u32 length;               /* number of tiles to draw */
+	__u32 *indices;             /* array of indices to tile map */
+};
+
+struct fb_tilecursor {
+	__u32 sx;                   /* cursor position in the x-axis */
+	__u32 sy;                   /* cursor position in the y-axis */
+	__u32 mode;                 /* 0 = erase, 1 = draw */
+	__u32 shape;                /* see FB_TILE_CURSOR_* */
+	__u32 fg;                   /* foreground color */
+	__u32 bg;                   /* background color */
+};
+
+struct fb_tile_ops {
+	/* set tile characteristics */
+	void (*fb_settile)(struct fb_info *info, struct fb_tilemap *map);
+
+	/* all dimensions from hereon are in terms of tiles */
+
+	/* move a rectangular region of tiles from one area to another*/
+	void (*fb_tilecopy)(struct fb_info *info, struct fb_tilearea *area);
+	/* fill a rectangular region with a tile */
+	void (*fb_tilefill)(struct fb_info *info, struct fb_tilerect *rect);
+	/* copy an array of tiles */
+	void (*fb_tileblit)(struct fb_info *info, struct fb_tileblit *blit);
+	/* cursor */
+	void (*fb_tilecursor)(struct fb_info *info,
+			      struct fb_tilecursor *cursor);
+	/* get maximum length of the tile map */
+	int (*fb_get_tilemax)(struct fb_info *info);
+};
+#endif /* CONFIG_FB_TILEBLITTING */
+
+/* FBINFO_* = fb_info.flags bit flags */
+#define FBINFO_MODULE		0x0001	/* Low-level driver is a module */
+#define FBINFO_HWACCEL_DISABLED	0x0002
+	/* When FBINFO_HWACCEL_DISABLED is set:
+	 *  Hardware acceleration is turned off.  Software implementations
+	 *  of required functions (copyarea(), fillrect(), and imageblit())
+	 *  takes over; acceleration engine should be in a quiescent state */
+
+/* hints */
+#define FBINFO_VIRTFB		0x0004 /* FB is System RAM, not device. */
+#define FBINFO_PARTIAL_PAN_OK	0x0040 /* otw use pan only for double-buffering */
+#define FBINFO_READS_FAST	0x0080 /* soft-copy faster than rendering */
+
+/* hardware supported ops */
+/*  semantics: when a bit is set, it indicates that the operation is
+ *   accelerated by hardware.
+ *  required functions will still work even if the bit is not set.
+ *  optional functions may not even exist if the flag bit is not set.
+ */
+#define FBINFO_HWACCEL_NONE		0x0000
+#define FBINFO_HWACCEL_COPYAREA		0x0100 /* required */
+#define FBINFO_HWACCEL_FILLRECT		0x0200 /* required */
+#define FBINFO_HWACCEL_IMAGEBLIT	0x0400 /* required */
+#define FBINFO_HWACCEL_ROTATE		0x0800 /* optional */
+#define FBINFO_HWACCEL_XPAN		0x1000 /* optional */
+#define FBINFO_HWACCEL_YPAN		0x2000 /* optional */
+#define FBINFO_HWACCEL_YWRAP		0x4000 /* optional */
+
+#define FBINFO_MISC_USEREVENT          0x10000 /* event request
+						  from userspace */
+#define FBINFO_MISC_TILEBLITTING       0x20000 /* use tile blitting */
+
+/* A driver may set this flag to indicate that it does want a set_par to be
+ * called every time when fbcon_switch is executed. The advantage is that with
+ * this flag set you can really be sure that set_par is always called before
+ * any of the functions dependent on the correct hardware state or altering
+ * that state, even if you are using some broken X releases. The disadvantage
+ * is that it introduces unwanted delays to every console switch if set_par
+ * is slow. It is a good idea to try this flag in the drivers initialization
+ * code whenever there is a bug report related to switching between X and the
+ * framebuffer console.
+ */
+#define FBINFO_MISC_ALWAYS_SETPAR   0x40000
+
+/* where the fb is a firmware driver, and can be replaced with a proper one */
+#define FBINFO_MISC_FIRMWARE        0x80000
+/*
+ * Host and GPU endianness differ.
+ */
+#define FBINFO_FOREIGN_ENDIAN	0x100000
+/*
+ * Big endian math. This is the same flags as above, but with different
+ * meaning, it is set by the fb subsystem depending FOREIGN_ENDIAN flag
+ * and host endianness. Drivers should not use this flag.
+ */
+#define FBINFO_BE_MATH  0x100000
+
+/* report to the VT layer that this fb driver can accept forced console
+   output like oopses */
+#define FBINFO_CAN_FORCE_OUTPUT     0x200000
+
+struct fb_info {
+	atomic_t count;
+	int node;
+	int flags;
+	struct mutex lock;		/* Lock for open/release/ioctl funcs */
+	struct mutex mm_lock;		/* Lock for fb_mmap and smem_* fields */
+	struct fb_var_screeninfo var;	/* Current var */
+	struct fb_fix_screeninfo fix;	/* Current fix */
+	struct fb_monspecs monspecs;	/* Current Monitor specs */
+	struct work_struct queue;	/* Framebuffer event queue */
+	struct fb_pixmap pixmap;	/* Image hardware mapper */
+	struct fb_pixmap sprite;	/* Cursor hardware mapper */
+	struct fb_cmap cmap;		/* Current cmap */
+	struct list_head modelist;      /* mode list */
+	struct fb_videomode *mode;	/* current mode */
+
+#ifdef CONFIG_FB_BACKLIGHT
+	/* assigned backlight device */
+	/* set before framebuffer registration, 
+	   remove after unregister */
+	struct backlight_device *bl_dev;
+
+	/* Backlight level curve */
+	struct mutex bl_curve_mutex;	
+	u8 bl_curve[FB_BACKLIGHT_LEVELS];
+#endif
+#ifdef CONFIG_FB_DEFERRED_IO
+	struct delayed_work deferred_work;
+	struct fb_deferred_io *fbdefio;
+#endif
+
+	struct fb_ops *fbops;
+	struct device *device;		/* This is the parent */
+	struct device *dev;		/* This is this fb device */
+	int class_flag;                    /* private sysfs flags */
+#ifdef CONFIG_FB_TILEBLITTING
+	struct fb_tile_ops *tileops;    /* Tile Blitting */
+#endif
+	char __iomem *screen_base;	/* Virtual address */
+	unsigned long screen_size;	/* Amount of ioremapped VRAM or 0 */ 
+	void *pseudo_palette;		/* Fake palette of 16 colors */ 
+#define FBINFO_STATE_RUNNING	0
+#define FBINFO_STATE_SUSPENDED	1
+	u32 state;			/* Hardware state i.e suspend */
+	void *fbcon_par;                /* fbcon use-only private area */
+	/* From here on everything is device dependent */
+	void *par;
+	/* we need the PCI or similar aperture base/size not
+	   smem_start/size as smem_start may just be an object
+	   allocated inside the aperture so may not actually overlap */
+	struct apertures_struct {
+		unsigned int count;
+		struct aperture {
+			resource_size_t base;
+			resource_size_t size;
+		} ranges[0];
+	} *apertures;
+};
+
+static inline struct apertures_struct *alloc_apertures(unsigned int max_num) {
+	struct apertures_struct *a = kzalloc(sizeof(struct apertures_struct)
+			+ max_num * sizeof(struct aperture), GFP_KERNEL);
+	if (!a)
+		return NULL;
+	a->count = max_num;
+	return a;
+}
+
+#ifdef MODULE
+#define FBINFO_DEFAULT	FBINFO_MODULE
+#else
+#define FBINFO_DEFAULT	0
+#endif
+
+// This will go away
+#define FBINFO_FLAG_MODULE	FBINFO_MODULE
+#define FBINFO_FLAG_DEFAULT	FBINFO_DEFAULT
+
+/* This will go away
+ * fbset currently hacks in FB_ACCELF_TEXT into var.accel_flags
+ * when it wants to turn the acceleration engine on.  This is
+ * really a separate operation, and should be modified via sysfs.
+ *  But for now, we leave it broken with the following define
+ */
+#define STUPID_ACCELF_TEXT_SHIT
+
+// This will go away
+#if defined(__sparc__)
+
+/* We map all of our framebuffers such that big-endian accesses
+ * are what we want, so the following is sufficient.
+ */
+
+// This will go away
+#define fb_readb sbus_readb
+#define fb_readw sbus_readw
+#define fb_readl sbus_readl
+#define fb_readq sbus_readq
+#define fb_writeb sbus_writeb
+#define fb_writew sbus_writew
+#define fb_writel sbus_writel
+#define fb_writeq sbus_writeq
+#define fb_memset sbus_memset_io
+#define fb_memcpy_fromfb sbus_memcpy_fromio
+#define fb_memcpy_tofb sbus_memcpy_toio
+
+#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || defined(__sh__) || defined(__powerpc__) || defined(__avr32__) || defined(__bfin__)
+
+#define fb_readb __raw_readb
+#define fb_readw __raw_readw
+#define fb_readl __raw_readl
+#define fb_readq __raw_readq
+#define fb_writeb __raw_writeb
+#define fb_writew __raw_writew
+#define fb_writel __raw_writel
+#define fb_writeq __raw_writeq
+#define fb_memset memset_io
+#define fb_memcpy_fromfb memcpy_fromio
+#define fb_memcpy_tofb memcpy_toio
+
+#else
+
+#define fb_readb(addr) (*(volatile u8 *) (addr))
+#define fb_readw(addr) (*(volatile u16 *) (addr))
+#define fb_readl(addr) (*(volatile u32 *) (addr))
+#define fb_readq(addr) (*(volatile u64 *) (addr))
+#define fb_writeb(b,addr) (*(volatile u8 *) (addr) = (b))
+#define fb_writew(b,addr) (*(volatile u16 *) (addr) = (b))
+#define fb_writel(b,addr) (*(volatile u32 *) (addr) = (b))
+#define fb_writeq(b,addr) (*(volatile u64 *) (addr) = (b))
+#define fb_memset memset
+#define fb_memcpy_fromfb memcpy
+#define fb_memcpy_tofb memcpy
+
+#endif
+
+#define FB_LEFT_POS(p, bpp)          (fb_be_math(p) ? (32 - (bpp)) : 0)
+#define FB_SHIFT_HIGH(p, val, bits)  (fb_be_math(p) ? (val) >> (bits) : \
+						      (val) << (bits))
+#define FB_SHIFT_LOW(p, val, bits)   (fb_be_math(p) ? (val) << (bits) : \
+						      (val) >> (bits))
+
+    /*
+     *  `Generic' versions of the frame buffer device operations
+     */
+
+extern int fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var); 
+extern int fb_pan_display(struct fb_info *info, struct fb_var_screeninfo *var); 
+extern int fb_blank(struct fb_info *info, int blank);
+extern void cfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect); 
+extern void cfb_copyarea(struct fb_info *info, const struct fb_copyarea *area); 
+extern void cfb_imageblit(struct fb_info *info, const struct fb_image *image);
+/*
+ * Drawing operations where framebuffer is in system RAM
+ */
+extern void sys_fillrect(struct fb_info *info, const struct fb_fillrect *rect);
+extern void sys_copyarea(struct fb_info *info, const struct fb_copyarea *area);
+extern void sys_imageblit(struct fb_info *info, const struct fb_image *image);
+extern ssize_t fb_sys_read(struct fb_info *info, char __user *buf,
+			   size_t count, loff_t *ppos);
+extern ssize_t fb_sys_write(struct fb_info *info, const char __user *buf,
+			    size_t count, loff_t *ppos);
+
+/* drivers/video/fbmem.c */
+extern int register_framebuffer(struct fb_info *fb_info);
+extern int unregister_framebuffer(struct fb_info *fb_info);
+extern int unlink_framebuffer(struct fb_info *fb_info);
+extern void remove_conflicting_framebuffers(struct apertures_struct *a,
+				const char *name, bool primary);
+extern int fb_prepare_logo(struct fb_info *fb_info, int rotate);
+extern int fb_show_logo(struct fb_info *fb_info, int rotate);
+extern char* fb_get_buffer_offset(struct fb_info *info, struct fb_pixmap *buf, u32 size);
+extern void fb_pad_unaligned_buffer(u8 *dst, u32 d_pitch, u8 *src, u32 idx,
+				u32 height, u32 shift_high, u32 shift_low, u32 mod);
+extern void fb_pad_aligned_buffer(u8 *dst, u32 d_pitch, u8 *src, u32 s_pitch, u32 height);
+extern void fb_set_suspend(struct fb_info *info, int state);
+extern int fb_get_color_depth(struct fb_var_screeninfo *var,
+			      struct fb_fix_screeninfo *fix);
+extern int fb_get_options(char *name, char **option);
+extern int fb_new_modelist(struct fb_info *info);
+
+extern struct fb_info *registered_fb[FB_MAX];
+extern int num_registered_fb;
+extern struct class *fb_class;
+
+extern int lock_fb_info(struct fb_info *info);
+
+static inline void unlock_fb_info(struct fb_info *info)
+{
+	mutex_unlock(&info->lock);
+}
+
+static inline void __fb_pad_aligned_buffer(u8 *dst, u32 d_pitch,
+					   u8 *src, u32 s_pitch, u32 height)
+{
+	int i, j;
+
+	d_pitch -= s_pitch;
+
+	for (i = height; i--; ) {
+		/* s_pitch is a few bytes at the most, memcpy is suboptimal */
+		for (j = 0; j < s_pitch; j++)
+			*dst++ = *src++;
+		dst += d_pitch;
+	}
+}
+
+/* drivers/video/fb_defio.c */
+extern void fb_deferred_io_init(struct fb_info *info);
+extern void fb_deferred_io_open(struct fb_info *info,
+				struct inode *inode,
+				struct file *file);
+extern void fb_deferred_io_cleanup(struct fb_info *info);
+extern int fb_deferred_io_fsync(struct file *file, loff_t start,
+				loff_t end, int datasync);
+
+static inline bool fb_be_math(struct fb_info *info)
+{
+#ifdef CONFIG_FB_FOREIGN_ENDIAN
+#if defined(CONFIG_FB_BOTH_ENDIAN)
+	return info->flags & FBINFO_BE_MATH;
+#elif defined(CONFIG_FB_BIG_ENDIAN)
+	return true;
+#elif defined(CONFIG_FB_LITTLE_ENDIAN)
+	return false;
+#endif /* CONFIG_FB_BOTH_ENDIAN */
+#else
+#ifdef __BIG_ENDIAN
+	return true;
+#else
+	return false;
+#endif /* __BIG_ENDIAN */
+#endif /* CONFIG_FB_FOREIGN_ENDIAN */
+}
+
+/* drivers/video/fbsysfs.c */
+extern struct fb_info *framebuffer_alloc(size_t size, struct device *dev);
+extern void framebuffer_release(struct fb_info *info);
+extern int fb_init_device(struct fb_info *fb_info);
+extern void fb_cleanup_device(struct fb_info *head);
+extern void fb_bl_default_curve(struct fb_info *fb_info, u8 off, u8 min, u8 max);
+
+/* drivers/video/fbmon.c */
+#define FB_MAXTIMINGS		0
+#define FB_VSYNCTIMINGS		1
+#define FB_HSYNCTIMINGS		2
+#define FB_DCLKTIMINGS		3
+#define FB_IGNOREMON		0x100
+
+#define FB_MODE_IS_UNKNOWN	0
+#define FB_MODE_IS_DETAILED	1
+#define FB_MODE_IS_STANDARD	2
+#define FB_MODE_IS_VESA		4
+#define FB_MODE_IS_CALCULATED	8
+#define FB_MODE_IS_FIRST	16
+#define FB_MODE_IS_FROM_VAR     32
+
+extern int fbmon_dpms(const struct fb_info *fb_info);
+extern int fb_get_mode(int flags, u32 val, struct fb_var_screeninfo *var,
+		       struct fb_info *info);
+extern int fb_validate_mode(const struct fb_var_screeninfo *var,
+			    struct fb_info *info);
+extern int fb_parse_edid(unsigned char *edid, struct fb_var_screeninfo *var);
+extern const unsigned char *fb_firmware_edid(struct device *device);
+extern void fb_edid_to_monspecs(unsigned char *edid,
+				struct fb_monspecs *specs);
+extern void fb_edid_add_monspecs(unsigned char *edid,
+				 struct fb_monspecs *specs);
+extern void fb_destroy_modedb(struct fb_videomode *modedb);
+extern int fb_find_mode_cvt(struct fb_videomode *mode, int margins, int rb);
+extern unsigned char *fb_ddc_read(struct i2c_adapter *adapter);
+
+/* drivers/video/modedb.c */
+#define VESA_MODEDB_SIZE 34
+extern void fb_var_to_videomode(struct fb_videomode *mode,
+				const struct fb_var_screeninfo *var);
+extern void fb_videomode_to_var(struct fb_var_screeninfo *var,
+				const struct fb_videomode *mode);
+extern int fb_mode_is_equal(const struct fb_videomode *mode1,
+			    const struct fb_videomode *mode2);
+extern int fb_add_videomode(const struct fb_videomode *mode,
+			    struct list_head *head);
+extern void fb_delete_videomode(const struct fb_videomode *mode,
+				struct list_head *head);
+extern const struct fb_videomode *fb_match_mode(const struct fb_var_screeninfo *var,
+						struct list_head *head);
+extern const struct fb_videomode *fb_find_best_mode(const struct fb_var_screeninfo *var,
+						    struct list_head *head);
+extern const struct fb_videomode *fb_find_nearest_mode(const struct fb_videomode *mode,
+						       struct list_head *head);
+extern void fb_destroy_modelist(struct list_head *head);
+extern void fb_videomode_to_modelist(const struct fb_videomode *modedb, int num,
+				     struct list_head *head);
+extern const struct fb_videomode *fb_find_best_display(const struct fb_monspecs *specs,
+						       struct list_head *head);
+
+/* drivers/video/fbcmap.c */
+extern int fb_alloc_cmap(struct fb_cmap *cmap, int len, int transp);
+extern int fb_alloc_cmap_gfp(struct fb_cmap *cmap, int len, int transp, gfp_t flags);
+extern void fb_dealloc_cmap(struct fb_cmap *cmap);
+extern int fb_copy_cmap(const struct fb_cmap *from, struct fb_cmap *to);
+extern int fb_cmap_to_user(const struct fb_cmap *from, struct fb_cmap_user *to);
+extern int fb_set_cmap(struct fb_cmap *cmap, struct fb_info *fb_info);
+extern int fb_set_user_cmap(struct fb_cmap_user *cmap, struct fb_info *fb_info);
+extern const struct fb_cmap *fb_default_cmap(int len);
+extern void fb_invert_cmaps(void);
+
+struct fb_videomode {
+	const char *name;	/* optional */
+	u32 refresh;		/* optional */
+	u32 xres;
+	u32 yres;
+	u32 pixclock;
+	u32 left_margin;
+	u32 right_margin;
+	u32 upper_margin;
+	u32 lower_margin;
+	u32 hsync_len;
+	u32 vsync_len;
+	u32 sync;
+	u32 vmode;
+	u32 flag;
+};
+
+extern const char *fb_mode_option;
+extern const struct fb_videomode vesa_modes[];
+extern const struct fb_videomode cea_modes[64];
+
+struct fb_modelist {
+	struct list_head list;
+	struct fb_videomode mode;
+};
+
+extern int fb_find_mode(struct fb_var_screeninfo *var,
+			struct fb_info *info, const char *mode_option,
+			const struct fb_videomode *db,
+			unsigned int dbsize,
+			const struct fb_videomode *default_mode,
+			unsigned int default_bpp);
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_FB_H */
diff --git a/include/linux/fcdevice.h b/include/linux/fcdevice.h
new file mode 100644
index 00000000..e460ef83
--- /dev/null
+++ b/include/linux/fcdevice.h
@@ -0,0 +1,33 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  NET  is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the Fibre Channel handlers.
+ *
+ * Version:	@(#)fcdevice.h	1.0.0	09/26/98
+ *
+ * Authors:	Vineet Abraham <vma@iol.unh.edu>
+ *
+ *		Relocated to include/linux where it belongs by Alan Cox 
+ *							<gw4pts@gw4pts.ampr.org>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ *	WARNING: This move may well be temporary. This file will get merged with others RSN.
+ *
+ */
+#ifndef _LINUX_FCDEVICE_H
+#define _LINUX_FCDEVICE_H
+
+
+#include <linux/if_fc.h>
+
+#ifdef __KERNEL__
+extern struct net_device *alloc_fcdev(int sizeof_priv);
+#endif
+
+#endif	/* _LINUX_FCDEVICE_H */
diff --git a/include/linux/fcntl.h b/include/linux/fcntl.h
new file mode 100644
index 00000000..f550f894
--- /dev/null
+++ b/include/linux/fcntl.h
@@ -0,0 +1,79 @@
+#ifndef _LINUX_FCNTL_H
+#define _LINUX_FCNTL_H
+
+#include <asm/fcntl.h>
+
+#define F_SETLEASE	(F_LINUX_SPECIFIC_BASE + 0)
+#define F_GETLEASE	(F_LINUX_SPECIFIC_BASE + 1)
+
+/*
+ * Cancel a blocking posix lock; internal use only until we expose an
+ * asynchronous lock api to userspace:
+ */
+#define F_CANCELLK	(F_LINUX_SPECIFIC_BASE + 5)
+
+/* Create a file descriptor with FD_CLOEXEC set. */
+#define F_DUPFD_CLOEXEC	(F_LINUX_SPECIFIC_BASE + 6)
+
+/*
+ * Request nofications on a directory.
+ * See below for events that may be notified.
+ */
+#define F_NOTIFY	(F_LINUX_SPECIFIC_BASE+2)
+
+/*
+ * Set and get of pipe page size array
+ */
+#define F_SETPIPE_SZ	(F_LINUX_SPECIFIC_BASE + 7)
+#define F_GETPIPE_SZ	(F_LINUX_SPECIFIC_BASE + 8)
+
+/*
+ * Types of directory notifications that may be requested.
+ */
+#define DN_ACCESS	0x00000001	/* File accessed */
+#define DN_MODIFY	0x00000002	/* File modified */
+#define DN_CREATE	0x00000004	/* File created */
+#define DN_DELETE	0x00000008	/* File removed */
+#define DN_RENAME	0x00000010	/* File renamed */
+#define DN_ATTRIB	0x00000020	/* File changed attibutes */
+#define DN_MULTISHOT	0x80000000	/* Don't remove notifier */
+
+#define AT_FDCWD		-100    /* Special value used to indicate
+                                           openat should use the current
+                                           working directory. */
+#define AT_SYMLINK_NOFOLLOW	0x100   /* Do not follow symbolic links.  */
+#define AT_REMOVEDIR		0x200   /* Remove directory instead of
+                                           unlinking file.  */
+#define AT_SYMLINK_FOLLOW	0x400   /* Follow symbolic links.  */
+#define AT_NO_AUTOMOUNT		0x800	/* Suppress terminal automount traversal */
+#define AT_EMPTY_PATH		0x1000	/* Allow empty relative pathname */
+
+#ifdef __KERNEL__
+
+#ifndef force_o_largefile
+#define force_o_largefile() (BITS_PER_LONG != 32)
+#endif
+
+#if BITS_PER_LONG == 32
+#define IS_GETLK32(cmd)		((cmd) == F_GETLK)
+#define IS_SETLK32(cmd)		((cmd) == F_SETLK)
+#define IS_SETLKW32(cmd)	((cmd) == F_SETLKW)
+#define IS_GETLK64(cmd)		((cmd) == F_GETLK64)
+#define IS_SETLK64(cmd)		((cmd) == F_SETLK64)
+#define IS_SETLKW64(cmd)	((cmd) == F_SETLKW64)
+#else
+#define IS_GETLK32(cmd)		(0)
+#define IS_SETLK32(cmd)		(0)
+#define IS_SETLKW32(cmd)	(0)
+#define IS_GETLK64(cmd)		((cmd) == F_GETLK)
+#define IS_SETLK64(cmd)		((cmd) == F_SETLK)
+#define IS_SETLKW64(cmd)	((cmd) == F_SETLKW)
+#endif /* BITS_PER_LONG == 32 */
+
+#define IS_GETLK(cmd)	(IS_GETLK32(cmd)  || IS_GETLK64(cmd))
+#define IS_SETLK(cmd)	(IS_SETLK32(cmd)  || IS_SETLK64(cmd))
+#define IS_SETLKW(cmd)	(IS_SETLKW32(cmd) || IS_SETLKW64(cmd))
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/linux/fd.h b/include/linux/fd.h
new file mode 100644
index 00000000..72202b1b
--- /dev/null
+++ b/include/linux/fd.h
@@ -0,0 +1,402 @@
+#ifndef _LINUX_FD_H
+#define _LINUX_FD_H
+
+#include <linux/ioctl.h>
+#include <linux/compiler.h>
+
+/* New file layout: Now the ioctl definitions immediately follow the
+ * definitions of the structures that they use */
+
+/*
+ * Geometry
+ */
+struct floppy_struct {
+	unsigned int	size,		/* nr of sectors total */
+			sect,		/* sectors per track */
+			head,		/* nr of heads */
+			track,		/* nr of tracks */
+			stretch;	/* bit 0 !=0 means double track steps */
+					/* bit 1 != 0 means swap sides */
+					/* bits 2..9 give the first sector */
+					/*  number (the LSB is flipped) */
+#define FD_STRETCH 1
+#define FD_SWAPSIDES 2
+#define FD_ZEROBASED 4
+#define FD_SECTBASEMASK 0x3FC
+#define FD_MKSECTBASE(s) (((s) ^ 1) << 2)
+#define FD_SECTBASE(floppy) ((((floppy)->stretch & FD_SECTBASEMASK) >> 2) ^ 1)
+
+	unsigned char	gap,		/* gap1 size */
+
+			rate,		/* data rate. |= 0x40 for perpendicular */
+#define FD_2M 0x4
+#define FD_SIZECODEMASK 0x38
+#define FD_SIZECODE(floppy) (((((floppy)->rate&FD_SIZECODEMASK)>> 3)+ 2) %8)
+#define FD_SECTSIZE(floppy) ( (floppy)->rate & FD_2M ? \
+			     512 : 128 << FD_SIZECODE(floppy) )
+#define FD_PERP 0x40
+
+			spec1,		/* stepping rate, head unload time */
+			fmt_gap;	/* gap2 size */
+	const char	* name; /* used only for predefined formats */
+};
+
+
+/* commands needing write access have 0x40 set */
+/* commands needing super user access have 0x80 set */
+
+#define FDCLRPRM _IO(2, 0x41)
+/* clear user-defined parameters */
+
+#define FDSETPRM _IOW(2, 0x42, struct floppy_struct) 
+#define FDSETMEDIAPRM FDSETPRM
+/* set user-defined parameters for current media */
+
+#define FDDEFPRM _IOW(2, 0x43, struct floppy_struct) 
+#define FDGETPRM _IOR(2, 0x04, struct floppy_struct)
+#define FDDEFMEDIAPRM FDDEFPRM
+#define FDGETMEDIAPRM FDGETPRM
+/* set/get disk parameters */
+
+
+#define	FDMSGON  _IO(2,0x45)
+#define	FDMSGOFF _IO(2,0x46)
+/* issue/don't issue kernel messages on media type change */
+
+
+/* 
+ * Formatting (obsolete)
+ */
+#define FD_FILL_BYTE 0xF6 /* format fill byte. */
+
+struct format_descr {
+	unsigned int device,head,track;
+};
+
+#define FDFMTBEG _IO(2,0x47)
+/* begin formatting a disk */
+#define	FDFMTTRK _IOW(2,0x48, struct format_descr)
+/* format the specified track */
+#define FDFMTEND _IO(2,0x49)
+/* end formatting a disk */
+
+
+/*
+ * Error thresholds
+ */
+struct floppy_max_errors {
+	unsigned int
+	  abort,      /* number of errors to be reached before aborting */
+	  read_track, /* maximal number of errors permitted to read an
+		       * entire track at once */
+	  reset,      /* maximal number of errors before a reset is tried */
+	  recal,      /* maximal number of errors before a recalibrate is
+		       * tried */
+
+	  /*
+	   * Threshold for reporting FDC errors to the console.
+	   * Setting this to zero may flood your screen when using
+	   * ultra cheap floppies ;-)
+	   */
+	  reporting;
+
+};
+
+#define FDSETEMSGTRESH	_IO(2,0x4a)
+/* set fdc error reporting threshold */
+
+#define FDFLUSH  _IO(2,0x4b)
+/* flush buffers for media; either for verifying media, or for
+ * handling a media change without closing the file descriptor */
+
+#define FDSETMAXERRS _IOW(2, 0x4c, struct floppy_max_errors)
+#define FDGETMAXERRS _IOR(2, 0x0e, struct floppy_max_errors)
+/* set/get abortion and read_track threshold. See also floppy_drive_params
+ * structure */
+
+
+typedef char floppy_drive_name[16];
+#define FDGETDRVTYP _IOR(2, 0x0f, floppy_drive_name)
+/* get drive type: 5 1/4 or 3 1/2 */
+
+
+/*
+ * Drive parameters (user modifiable)
+ */
+struct floppy_drive_params {
+	signed char cmos;		/* CMOS type */
+	
+	/* Spec2 is (HLD<<1 | ND), where HLD is head load time (1=2ms, 2=4 ms 
+	 * etc) and ND is set means no DMA. Hardcoded to 6 (HLD=6ms, use DMA).
+	 */
+	unsigned long max_dtr;		/* Step rate, usec */
+	unsigned long hlt;     		/* Head load/settle time, msec */
+	unsigned long hut;     		/* Head unload time (remnant of 
+					 * 8" drives) */
+	unsigned long srt;     		/* Step rate, usec */
+
+	unsigned long spinup;		/* time needed for spinup (expressed
+					 * in jiffies) */
+	unsigned long spindown;		/* timeout needed for spindown */
+	unsigned char spindown_offset;	/* decides in which position the disk
+					 * will stop */
+	unsigned char select_delay;	/* delay to wait after select */
+	unsigned char rps;		/* rotations per second */
+	unsigned char tracks;		/* maximum number of tracks */
+	unsigned long timeout;		/* timeout for interrupt requests */
+	
+	unsigned char interleave_sect;	/* if there are more sectors, use 
+					 * interleave */
+	
+	struct floppy_max_errors max_errors;
+	
+	char flags;			/* various flags, including ftd_msg */
+/*
+ * Announce successful media type detection and media information loss after
+ * disk changes.
+ * Also used to enable/disable printing of overrun warnings.
+ */
+
+#define FTD_MSG 0x10
+#define FD_BROKEN_DCL 0x20
+#define FD_DEBUG 0x02
+#define FD_SILENT_DCL_CLEAR 0x4
+#define FD_INVERTED_DCL 0x80 /* must be 0x80, because of hardware 
+				considerations */
+
+	char read_track;		/* use readtrack during probing? */
+
+/*
+ * Auto-detection. Each drive type has eight formats which are
+ * used in succession to try to read the disk. If the FDC cannot lock onto
+ * the disk, the next format is tried. This uses the variable 'probing'.
+ */
+	short autodetect[8];		/* autodetected formats */
+	
+	int checkfreq; /* how often should the drive be checked for disk 
+			* changes */
+	int native_format; /* native format of this drive */
+};
+
+enum {
+	FD_NEED_TWADDLE_BIT,	/* more magic */
+	FD_VERIFY_BIT,		/* inquire for write protection */
+	FD_DISK_NEWCHANGE_BIT,	/* change detected, and no action undertaken yet
+				 * to clear media change status */
+	FD_UNUSED_BIT,
+	FD_DISK_CHANGED_BIT,	/* disk has been changed since last i/o */
+	FD_DISK_WRITABLE_BIT	/* disk is writable */
+};
+
+#define FDSETDRVPRM _IOW(2, 0x90, struct floppy_drive_params)
+#define FDGETDRVPRM _IOR(2, 0x11, struct floppy_drive_params)
+/* set/get drive parameters */
+
+
+/*
+ * Current drive state (not directly modifiable by user, readonly)
+ */
+struct floppy_drive_struct {
+	unsigned long flags;
+/* values for these flags */
+#define FD_NEED_TWADDLE (1 << FD_NEED_TWADDLE_BIT)
+#define FD_VERIFY (1 << FD_VERIFY_BIT)
+#define FD_DISK_NEWCHANGE (1 << FD_DISK_NEWCHANGE_BIT)
+#define FD_DISK_CHANGED (1 << FD_DISK_CHANGED_BIT)
+#define FD_DISK_WRITABLE (1 << FD_DISK_WRITABLE_BIT)
+
+	unsigned long spinup_date;
+	unsigned long select_date;
+	unsigned long first_read_date;
+	short probed_format;
+	short track; /* current track */
+	short maxblock; /* id of highest block read */
+	short maxtrack; /* id of highest half track read */
+	int generation; /* how many diskchanges? */
+
+/*
+ * (User-provided) media information is _not_ discarded after a media change
+ * if the corresponding keep_data flag is non-zero. Positive values are
+ * decremented after each probe.
+ */
+	int keep_data;
+	
+	/* Prevent "aliased" accesses. */
+	int fd_ref;
+	int fd_device;
+	unsigned long last_checked; /* when was the drive last checked for a disk 
+			   * change? */
+	
+	char *dmabuf;
+	int bufblocks;
+};
+
+#define FDGETDRVSTAT _IOR(2, 0x12, struct floppy_drive_struct)
+#define FDPOLLDRVSTAT _IOR(2, 0x13, struct floppy_drive_struct)
+/* get drive state: GET returns the cached state, POLL polls for new state */
+
+
+/*
+ * reset FDC
+ */
+enum reset_mode {
+	FD_RESET_IF_NEEDED,	/* reset only if the reset flags is set */
+	FD_RESET_IF_RAWCMD,	/* obsolete */
+	FD_RESET_ALWAYS		/* reset always */
+};
+#define FDRESET _IO(2, 0x54)
+
+
+/*
+ * FDC state
+ */
+struct floppy_fdc_state {	
+	int spec1;		/* spec1 value last used */
+	int spec2;		/* spec2 value last used */
+	int dtr;
+	unsigned char version;	/* FDC version code */
+	unsigned char dor;
+	unsigned long address;	/* io address */
+	unsigned int rawcmd:2;
+	unsigned int reset:1;
+	unsigned int need_configure:1;
+	unsigned int perp_mode:2;
+	unsigned int has_fifo:1;
+	unsigned int driver_version;	/* version code for floppy driver */
+#define FD_DRIVER_VERSION 0x100
+/* user programs using the floppy API should use floppy_fdc_state to
+ * get the version number of the floppy driver that they are running
+ * on. If this version number is bigger than the one compiled into the
+ * user program (the FD_DRIVER_VERSION define), it should be prepared
+ * to bigger structures
+ */
+
+	unsigned char track[4];
+	/* Position of the heads of the 4 units attached to this FDC,
+	 * as stored on the FDC. In the future, the position as stored
+	 * on the FDC might not agree with the actual physical
+	 * position of these drive heads. By allowing such
+	 * disagreement, it will be possible to reset the FDC without
+	 * incurring the expensive cost of repositioning all heads.
+	 * Right now, these positions are hard wired to 0. */
+
+};
+
+#define FDGETFDCSTAT _IOR(2, 0x15, struct floppy_fdc_state)
+
+
+/*
+ * Asynchronous Write error tracking
+ */
+struct floppy_write_errors {
+	/* Write error logging.
+	 *
+	 * These fields can be cleared with the FDWERRORCLR ioctl.
+	 * Only writes that were attempted but failed due to a physical media
+	 * error are logged.  write(2) calls that fail and return an error code
+	 * to the user process are not counted.
+	 */
+
+	unsigned int write_errors;  /* number of physical write errors 
+				     * encountered */
+	
+	/* position of first and last write errors */
+	unsigned long first_error_sector;
+	int           first_error_generation;
+	unsigned long last_error_sector;
+	int           last_error_generation;
+	
+	unsigned int badness; /* highest retry count for a read or write 
+			       * operation */
+};
+
+#define FDWERRORCLR  _IO(2, 0x56)
+/* clear write error and badness information */
+#define FDWERRORGET  _IOR(2, 0x17, struct floppy_write_errors)
+/* get write error and badness information */
+
+
+/*
+ * Raw commands
+ */
+/* new interface flag: now we can do them in batches */
+#define FDHAVEBATCHEDRAWCMD
+
+struct floppy_raw_cmd {
+	unsigned int flags;
+#define FD_RAW_READ 1
+#define FD_RAW_WRITE 2
+#define FD_RAW_NO_MOTOR 4
+#define FD_RAW_DISK_CHANGE 4 /* out: disk change flag was set */
+#define FD_RAW_INTR 8    /* wait for an interrupt */
+#define FD_RAW_SPIN 0x10 /* spin up the disk for this command */
+#define FD_RAW_NO_MOTOR_AFTER 0x20 /* switch the motor off after command 
+				    * completion */
+#define FD_RAW_NEED_DISK 0x40  /* this command needs a disk to be present */
+#define FD_RAW_NEED_SEEK 0x80  /* this command uses an implied seek (soft) */
+
+/* more "in" flags */
+#define FD_RAW_MORE 0x100  /* more records follow */
+#define FD_RAW_STOP_IF_FAILURE 0x200 /* stop if we encounter a failure */
+#define FD_RAW_STOP_IF_SUCCESS 0x400 /* stop if command successful */
+#define FD_RAW_SOFTFAILURE 0x800 /* consider the return value for failure
+				  * detection too */
+
+/* more "out" flags */
+#define FD_RAW_FAILURE 0x10000 /* command sent to fdc, fdc returned error */
+#define FD_RAW_HARDFAILURE 0x20000 /* fdc had to be reset, or timed out */
+
+	void __user *data;
+	char *kernel_data; /* location of data buffer in the kernel */
+	struct floppy_raw_cmd *next; /* used for chaining of raw cmd's 
+				      * within the kernel */
+	long length; /* in: length of dma transfer. out: remaining bytes */
+	long phys_length; /* physical length, if different from dma length */
+	int buffer_length; /* length of allocated buffer */
+
+	unsigned char rate;
+	unsigned char cmd_count;
+	unsigned char cmd[16];
+	unsigned char reply_count;
+	unsigned char reply[16];
+	int track;
+	int resultcode;
+
+	int reserved1;
+	int reserved2;
+};
+
+#define FDRAWCMD _IO(2, 0x58)
+/* send a raw command to the fdc. Structure size not included, because of
+ * batches */
+
+#define FDTWADDLE _IO(2, 0x59)
+/* flicker motor-on bit before reading a sector. Experimental */
+
+
+#define FDEJECT _IO(2, 0x5a)
+/* eject the disk */
+
+
+#ifdef __KERNEL__
+#ifdef CONFIG_COMPAT
+#include <linux/compat.h>
+
+struct compat_floppy_struct {
+	compat_uint_t	size;
+	compat_uint_t	sect;
+	compat_uint_t	head;
+	compat_uint_t	track;
+	compat_uint_t	stretch;
+	unsigned char	gap;
+	unsigned char	rate;
+	unsigned char	spec1;
+	unsigned char	fmt_gap;
+	const compat_caddr_t name;
+};
+
+#define FDGETPRM32 _IOR(2, 0x04, struct compat_floppy_struct)
+#endif
+#endif
+
+#endif
diff --git a/include/linux/fddidevice.h b/include/linux/fddidevice.h
new file mode 100644
index 00000000..155bafd9
--- /dev/null
+++ b/include/linux/fddidevice.h
@@ -0,0 +1,34 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the FDDI handlers.
+ *
+ * Version:	@(#)fddidevice.h	1.0.0	08/12/96
+ *
+ * Author:	Lawrence V. Stefani, <stefani@lkg.dec.com>
+ *
+ *		fddidevice.h is based on previous trdevice.h work by
+ *			Ross Biro
+ *			Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *			Alan Cox, <gw4pts@gw4pts.ampr.org>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_FDDIDEVICE_H
+#define _LINUX_FDDIDEVICE_H
+
+#include <linux/if_fddi.h>
+
+#ifdef __KERNEL__
+extern __be16	fddi_type_trans(struct sk_buff *skb,
+				struct net_device *dev);
+extern int fddi_change_mtu(struct net_device *dev, int new_mtu);
+extern struct net_device *alloc_fddidev(int sizeof_priv);
+#endif
+
+#endif	/* _LINUX_FDDIDEVICE_H */
diff --git a/include/linux/fdreg.h b/include/linux/fdreg.h
new file mode 100644
index 00000000..61ce6416
--- /dev/null
+++ b/include/linux/fdreg.h
@@ -0,0 +1,137 @@
+#ifndef _LINUX_FDREG_H
+#define _LINUX_FDREG_H
+/*
+ * This file contains some defines for the floppy disk controller.
+ * Various sources. Mostly "IBM Microcomputers: A Programmers
+ * Handbook", Sanches and Canton.
+ */
+
+#ifdef FDPATCHES
+#define FD_IOPORT fdc_state[fdc].address
+#else
+/* It would be a lot saner just to force fdc_state[fdc].address to always
+   be set ! FIXME */
+#define FD_IOPORT 0x3f0
+#endif
+
+/* Fd controller regs. S&C, about page 340 */
+#define FD_STATUS	(4 + FD_IOPORT )
+#define FD_DATA		(5 + FD_IOPORT )
+
+/* Digital Output Register */
+#define FD_DOR		(2 + FD_IOPORT )
+
+/* Digital Input Register (read) */
+#define FD_DIR		(7 + FD_IOPORT )
+
+/* Diskette Control Register (write)*/
+#define FD_DCR		(7 + FD_IOPORT )
+
+/* Bits of main status register */
+#define STATUS_BUSYMASK	0x0F		/* drive busy mask */
+#define STATUS_BUSY	0x10		/* FDC busy */
+#define STATUS_DMA	0x20		/* 0- DMA mode */
+#define STATUS_DIR	0x40		/* 0- cpu->fdc */
+#define STATUS_READY	0x80		/* Data reg ready */
+
+/* Bits of FD_ST0 */
+#define ST0_DS		0x03		/* drive select mask */
+#define ST0_HA		0x04		/* Head (Address) */
+#define ST0_NR		0x08		/* Not Ready */
+#define ST0_ECE		0x10		/* Equipment check error */
+#define ST0_SE		0x20		/* Seek end */
+#define ST0_INTR	0xC0		/* Interrupt code mask */
+
+/* Bits of FD_ST1 */
+#define ST1_MAM		0x01		/* Missing Address Mark */
+#define ST1_WP		0x02		/* Write Protect */
+#define ST1_ND		0x04		/* No Data - unreadable */
+#define ST1_OR		0x10		/* OverRun */
+#define ST1_CRC		0x20		/* CRC error in data or addr */
+#define ST1_EOC		0x80		/* End Of Cylinder */
+
+/* Bits of FD_ST2 */
+#define ST2_MAM		0x01		/* Missing Address Mark (again) */
+#define ST2_BC		0x02		/* Bad Cylinder */
+#define ST2_SNS		0x04		/* Scan Not Satisfied */
+#define ST2_SEH		0x08		/* Scan Equal Hit */
+#define ST2_WC		0x10		/* Wrong Cylinder */
+#define ST2_CRC		0x20		/* CRC error in data field */
+#define ST2_CM		0x40		/* Control Mark = deleted */
+
+/* Bits of FD_ST3 */
+#define ST3_HA		0x04		/* Head (Address) */
+#define ST3_DS		0x08		/* drive is double-sided */
+#define ST3_TZ		0x10		/* Track Zero signal (1=track 0) */
+#define ST3_RY		0x20		/* drive is ready */
+#define ST3_WP		0x40		/* Write Protect */
+#define ST3_FT		0x80		/* Drive Fault */
+
+/* Values for FD_COMMAND */
+#define FD_RECALIBRATE		0x07	/* move to track 0 */
+#define FD_SEEK			0x0F	/* seek track */
+#define FD_READ			0xE6	/* read with MT, MFM, SKip deleted */
+#define FD_WRITE		0xC5	/* write with MT, MFM */
+#define FD_SENSEI		0x08	/* Sense Interrupt Status */
+#define FD_SPECIFY		0x03	/* specify HUT etc */
+#define FD_FORMAT		0x4D	/* format one track */
+#define FD_VERSION		0x10	/* get version code */
+#define FD_CONFIGURE		0x13	/* configure FIFO operation */
+#define FD_PERPENDICULAR	0x12	/* perpendicular r/w mode */
+#define FD_GETSTATUS		0x04	/* read ST3 */
+#define FD_DUMPREGS		0x0E	/* dump the contents of the fdc regs */
+#define FD_READID		0xEA	/* prints the header of a sector */
+#define FD_UNLOCK		0x14	/* Fifo config unlock */
+#define FD_LOCK			0x94	/* Fifo config lock */
+#define FD_RSEEK_OUT		0x8f	/* seek out (i.e. to lower tracks) */
+#define FD_RSEEK_IN		0xcf	/* seek in (i.e. to higher tracks) */
+
+/* the following commands are new in the 82078. They are not used in the
+ * floppy driver, except the first three. These commands may be useful for apps
+ * which use the FDRAWCMD interface. For doc, get the 82078 spec sheets at
+ * http://www.intel.com/design/archives/periphrl/docs/29046803.htm */
+
+#define FD_PARTID		0x18	/* part id ("extended" version cmd) */
+#define FD_SAVE			0x2e	/* save fdc regs for later restore */
+#define FD_DRIVESPEC		0x8e	/* drive specification: Access to the
+					 * 2 Mbps data transfer rate for tape
+					 * drives */
+
+#define FD_RESTORE		0x4e    /* later restore */
+#define FD_POWERDOWN		0x27	/* configure FDC's powersave features */
+#define FD_FORMAT_N_WRITE	0xef    /* format and write in one go. */
+#define FD_OPTION		0x33	/* ISO format (which is a clean way to
+					 * pack more sectors on a track) */
+
+/* DMA commands */
+#define DMA_READ	0x46
+#define DMA_WRITE	0x4A
+
+/* FDC version return types */
+#define FDC_NONE	0x00
+#define FDC_UNKNOWN	0x10	/* DO NOT USE THIS TYPE EXCEPT IF IDENTIFICATION
+				   FAILS EARLY */
+#define FDC_8272A	0x20	/* Intel 8272a, NEC 765 */
+#define FDC_765ED	0x30	/* Non-Intel 1MB-compatible FDC, can't detect */
+#define FDC_82072	0x40	/* Intel 82072; 8272a + FIFO + DUMPREGS */
+#define FDC_82072A	0x45	/* 82072A (on Sparcs) */
+#define FDC_82077_ORIG	0x51	/* Original version of 82077AA, sans LOCK */
+#define FDC_82077	0x52	/* 82077AA-1 */
+#define FDC_82078_UNKN	0x5f	/* Unknown 82078 variant */
+#define FDC_82078	0x60	/* 44pin 82078 or 64pin 82078SL */
+#define FDC_82078_1	0x61	/* 82078-1 (2Mbps fdc) */
+#define FDC_S82078B	0x62	/* S82078B (first seen on Adaptec AVA-2825 VLB
+				 * SCSI/EIDE/Floppy controller) */
+#define FDC_87306	0x63	/* National Semiconductor PC 87306 */
+
+/*
+ * Beware: the fdc type list is roughly sorted by increasing features.
+ * Presence of features is tested by comparing the FDC version id with the
+ * "oldest" version that has the needed feature.
+ * If during FDC detection, an obscure test fails late in the sequence, don't
+ * assign FDC_UNKNOWN. Else the FDC will be treated as a dumb 8272a, or worse.
+ * This is especially true if the tests are unneeded.
+ */
+
+#define FD_RESET_DELAY 20
+#endif
diff --git a/include/linux/fdtable.h b/include/linux/fdtable.h
new file mode 100644
index 00000000..158a41ee
--- /dev/null
+++ b/include/linux/fdtable.h
@@ -0,0 +1,130 @@
+/*
+ * descriptor table internals; you almost certainly want file.h instead.
+ */
+
+#ifndef __LINUX_FDTABLE_H
+#define __LINUX_FDTABLE_H
+
+#include <linux/posix_types.h>
+#include <linux/compiler.h>
+#include <linux/spinlock.h>
+#include <linux/rcupdate.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+
+#include <linux/atomic.h>
+
+/*
+ * The default fd array needs to be at least BITS_PER_LONG,
+ * as this is the granularity returned by copy_fdset().
+ */
+#define NR_OPEN_DEFAULT BITS_PER_LONG
+
+struct fdtable {
+	unsigned int max_fds;
+	struct file __rcu **fd;      /* current fd array */
+	unsigned long *close_on_exec;
+	unsigned long *open_fds;
+	struct rcu_head rcu;
+	struct fdtable *next;
+};
+
+static inline void __set_close_on_exec(int fd, struct fdtable *fdt)
+{
+	__set_bit(fd, fdt->close_on_exec);
+}
+
+static inline void __clear_close_on_exec(int fd, struct fdtable *fdt)
+{
+	__clear_bit(fd, fdt->close_on_exec);
+}
+
+static inline bool close_on_exec(int fd, const struct fdtable *fdt)
+{
+	return test_bit(fd, fdt->close_on_exec);
+}
+
+static inline void __set_open_fd(int fd, struct fdtable *fdt)
+{
+	__set_bit(fd, fdt->open_fds);
+}
+
+static inline void __clear_open_fd(int fd, struct fdtable *fdt)
+{
+	__clear_bit(fd, fdt->open_fds);
+}
+
+static inline bool fd_is_open(int fd, const struct fdtable *fdt)
+{
+	return test_bit(fd, fdt->open_fds);
+}
+
+/*
+ * Open file table structure
+ */
+struct files_struct {
+  /*
+   * read mostly part
+   */
+	atomic_t count;
+	struct fdtable __rcu *fdt;
+	struct fdtable fdtab;
+  /*
+   * written part on a separate cache line in SMP
+   */
+	spinlock_t file_lock ____cacheline_aligned_in_smp;
+	int next_fd;
+	unsigned long close_on_exec_init[1];
+	unsigned long open_fds_init[1];
+	struct file __rcu * fd_array[NR_OPEN_DEFAULT];
+};
+
+#define rcu_dereference_check_fdtable(files, fdtfd) \
+	(rcu_dereference_check((fdtfd), \
+			       lockdep_is_held(&(files)->file_lock) || \
+			       atomic_read(&(files)->count) == 1 || \
+			       rcu_my_thread_group_empty()))
+
+#define files_fdtable(files) \
+		(rcu_dereference_check_fdtable((files), (files)->fdt))
+
+struct file_operations;
+struct vfsmount;
+struct dentry;
+
+extern int expand_files(struct files_struct *, int nr);
+extern void free_fdtable_rcu(struct rcu_head *rcu);
+extern void __init files_defer_init(void);
+
+static inline void free_fdtable(struct fdtable *fdt)
+{
+	call_rcu(&fdt->rcu, free_fdtable_rcu);
+}
+
+static inline struct file * fcheck_files(struct files_struct *files, unsigned int fd)
+{
+	struct file * file = NULL;
+	struct fdtable *fdt = files_fdtable(files);
+
+	if (fd < fdt->max_fds)
+		file = rcu_dereference_check_fdtable(files, fdt->fd[fd]);
+	return file;
+}
+
+/*
+ * Check whether the specified fd has an open file.
+ */
+#define fcheck(fd)	fcheck_files(current->files, fd)
+
+struct task_struct;
+
+struct files_struct *get_files_struct(struct task_struct *);
+void put_files_struct(struct files_struct *fs);
+void reset_files_struct(struct files_struct *);
+int unshare_files(struct files_struct **);
+struct files_struct *dup_fd(struct files_struct *, int *);
+
+extern struct kmem_cache *files_cachep;
+
+#endif /* __LINUX_FDTABLE_H */
diff --git a/include/linux/fec.h b/include/linux/fec.h
new file mode 100644
index 00000000..bcff455d
--- /dev/null
+++ b/include/linux/fec.h
@@ -0,0 +1,24 @@
+/* include/linux/fec.h
+ *
+ * Copyright (c) 2009 Orex Computed Radiography
+ *   Baruch Siach <baruch@tkos.co.il>
+ *
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * Header file for the FEC platform data
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __LINUX_FEC_H__
+#define __LINUX_FEC_H__
+
+#include <linux/phy.h>
+
+struct fec_platform_data {
+	phy_interface_t phy;
+	unsigned char mac[ETH_ALEN];
+};
+
+#endif
diff --git a/include/linux/fib_rules.h b/include/linux/fib_rules.h
new file mode 100644
index 00000000..51da65b6
--- /dev/null
+++ b/include/linux/fib_rules.h
@@ -0,0 +1,72 @@
+#ifndef __LINUX_FIB_RULES_H
+#define __LINUX_FIB_RULES_H
+
+#include <linux/types.h>
+#include <linux/rtnetlink.h>
+
+/* rule is permanent, and cannot be deleted */
+#define FIB_RULE_PERMANENT	0x00000001
+#define FIB_RULE_INVERT		0x00000002
+#define FIB_RULE_UNRESOLVED	0x00000004
+#define FIB_RULE_IIF_DETACHED	0x00000008
+#define FIB_RULE_DEV_DETACHED	FIB_RULE_IIF_DETACHED
+#define FIB_RULE_OIF_DETACHED	0x00000010
+
+/* try to find source address in routing lookups */
+#define FIB_RULE_FIND_SADDR	0x00010000
+
+struct fib_rule_hdr {
+	__u8		family;
+	__u8		dst_len;
+	__u8		src_len;
+	__u8		tos;
+
+	__u8		table;
+	__u8		res1;	/* reserved */
+	__u8		res2;	/* reserved */
+	__u8		action;
+
+	__u32		flags;
+};
+
+enum {
+	FRA_UNSPEC,
+	FRA_DST,	/* destination address */
+	FRA_SRC,	/* source address */
+	FRA_IIFNAME,	/* interface name */
+#define FRA_IFNAME	FRA_IIFNAME
+	FRA_GOTO,	/* target to jump to (FR_ACT_GOTO) */
+	FRA_UNUSED2,
+	FRA_PRIORITY,	/* priority/preference */
+	FRA_UNUSED3,
+	FRA_UNUSED4,
+	FRA_UNUSED5,
+	FRA_FWMARK,	/* mark */
+	FRA_FLOW,	/* flow/class id */
+	FRA_UNUSED6,
+	FRA_UNUSED7,
+	FRA_UNUSED8,
+	FRA_TABLE,	/* Extended table id */
+	FRA_FWMASK,	/* mask for netfilter mark */
+	FRA_OIFNAME,
+	__FRA_MAX
+};
+
+#define FRA_MAX (__FRA_MAX - 1)
+
+enum {
+	FR_ACT_UNSPEC,
+	FR_ACT_TO_TBL,		/* Pass to fixed table */
+	FR_ACT_GOTO,		/* Jump to another rule */
+	FR_ACT_NOP,		/* No operation */
+	FR_ACT_RES3,
+	FR_ACT_RES4,
+	FR_ACT_BLACKHOLE,	/* Drop without notification */
+	FR_ACT_UNREACHABLE,	/* Drop with ENETUNREACH */
+	FR_ACT_PROHIBIT,	/* Drop with EACCES */
+	__FR_ACT_MAX,
+};
+
+#define FR_ACT_MAX (__FR_ACT_MAX - 1)
+
+#endif
diff --git a/include/linux/fiemap.h b/include/linux/fiemap.h
new file mode 100644
index 00000000..d830747f
--- /dev/null
+++ b/include/linux/fiemap.h
@@ -0,0 +1,68 @@
+/*
+ * FS_IOC_FIEMAP ioctl infrastructure.
+ *
+ * Some portions copyright (C) 2007 Cluster File Systems, Inc
+ *
+ * Authors: Mark Fasheh <mfasheh@suse.com>
+ *          Kalpak Shah <kalpak.shah@sun.com>
+ *          Andreas Dilger <adilger@sun.com>
+ */
+
+#ifndef _LINUX_FIEMAP_H
+#define _LINUX_FIEMAP_H
+
+#include <linux/types.h>
+
+struct fiemap_extent {
+	__u64 fe_logical;  /* logical offset in bytes for the start of
+			    * the extent from the beginning of the file */
+	__u64 fe_physical; /* physical offset in bytes for the start
+			    * of the extent from the beginning of the disk */
+	__u64 fe_length;   /* length in bytes for this extent */
+	__u64 fe_reserved64[2];
+	__u32 fe_flags;    /* FIEMAP_EXTENT_* flags for this extent */
+	__u32 fe_reserved[3];
+};
+
+struct fiemap {
+	__u64 fm_start;		/* logical offset (inclusive) at
+				 * which to start mapping (in) */
+	__u64 fm_length;	/* logical length of mapping which
+				 * userspace wants (in) */
+	__u32 fm_flags;		/* FIEMAP_FLAG_* flags for request (in/out) */
+	__u32 fm_mapped_extents;/* number of extents that were mapped (out) */
+	__u32 fm_extent_count;  /* size of fm_extents array (in) */
+	__u32 fm_reserved;
+	struct fiemap_extent fm_extents[0]; /* array of mapped extents (out) */
+};
+
+#define FIEMAP_MAX_OFFSET	(~0ULL)
+
+#define FIEMAP_FLAG_SYNC	0x00000001 /* sync file data before map */
+#define FIEMAP_FLAG_XATTR	0x00000002 /* map extended attribute tree */
+
+#define FIEMAP_FLAGS_COMPAT	(FIEMAP_FLAG_SYNC | FIEMAP_FLAG_XATTR)
+
+#define FIEMAP_EXTENT_LAST		0x00000001 /* Last extent in file. */
+#define FIEMAP_EXTENT_UNKNOWN		0x00000002 /* Data location unknown. */
+#define FIEMAP_EXTENT_DELALLOC		0x00000004 /* Location still pending.
+						    * Sets EXTENT_UNKNOWN. */
+#define FIEMAP_EXTENT_ENCODED		0x00000008 /* Data can not be read
+						    * while fs is unmounted */
+#define FIEMAP_EXTENT_DATA_ENCRYPTED	0x00000080 /* Data is encrypted by fs.
+						    * Sets EXTENT_NO_BYPASS. */
+#define FIEMAP_EXTENT_NOT_ALIGNED	0x00000100 /* Extent offsets may not be
+						    * block aligned. */
+#define FIEMAP_EXTENT_DATA_INLINE	0x00000200 /* Data mixed with metadata.
+						    * Sets EXTENT_NOT_ALIGNED.*/
+#define FIEMAP_EXTENT_DATA_TAIL		0x00000400 /* Multiple files in block.
+						    * Sets EXTENT_NOT_ALIGNED.*/
+#define FIEMAP_EXTENT_UNWRITTEN		0x00000800 /* Space allocated, but
+						    * no data (i.e. zero). */
+#define FIEMAP_EXTENT_MERGED		0x00001000 /* File does not natively
+						    * support extents. Result
+						    * merged for efficiency. */
+#define FIEMAP_EXTENT_SHARED		0x00002000 /* Space shared with other
+						    * files. */
+
+#endif /* _LINUX_FIEMAP_H */
diff --git a/include/linux/file.h b/include/linux/file.h
new file mode 100644
index 00000000..58bf158c
--- /dev/null
+++ b/include/linux/file.h
@@ -0,0 +1,42 @@
+/*
+ * Wrapper functions for accessing the file_struct fd array.
+ */
+
+#ifndef __LINUX_FILE_H
+#define __LINUX_FILE_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/posix_types.h>
+
+struct file;
+
+extern void fput(struct file *);
+
+struct file_operations;
+struct vfsmount;
+struct dentry;
+struct path;
+extern struct file *alloc_file(struct path *, fmode_t mode,
+	const struct file_operations *fop);
+
+static inline void fput_light(struct file *file, int fput_needed)
+{
+	if (fput_needed)
+		fput(file);
+}
+
+extern struct file *fget(unsigned int fd);
+extern struct file *fget_light(unsigned int fd, int *fput_needed);
+extern struct file *fget_raw(unsigned int fd);
+extern struct file *fget_raw_light(unsigned int fd, int *fput_needed);
+extern void set_close_on_exec(unsigned int fd, int flag);
+extern void put_filp(struct file *);
+extern int alloc_fd(unsigned start, unsigned flags);
+extern int get_unused_fd(void);
+#define get_unused_fd_flags(flags) alloc_fd(0, (flags))
+extern void put_unused_fd(unsigned int fd);
+
+extern void fd_install(unsigned int fd, struct file *file);
+
+#endif /* __LINUX_FILE_H */
diff --git a/include/linux/filter.h b/include/linux/filter.h
new file mode 100644
index 00000000..8eeb205f
--- /dev/null
+++ b/include/linux/filter.h
@@ -0,0 +1,235 @@
+/*
+ * Linux Socket Filter Data Structures
+ */
+
+#ifndef __LINUX_FILTER_H__
+#define __LINUX_FILTER_H__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+#ifdef __KERNEL__
+#include <linux/atomic.h>
+#endif
+
+/*
+ * Current version of the filter code architecture.
+ */
+#define BPF_MAJOR_VERSION 1
+#define BPF_MINOR_VERSION 1
+
+/*
+ *	Try and keep these values and structures similar to BSD, especially
+ *	the BPF code definitions which need to match so you can share filters
+ */
+ 
+struct sock_filter {	/* Filter block */
+	__u16	code;   /* Actual filter code */
+	__u8	jt;	/* Jump true */
+	__u8	jf;	/* Jump false */
+	__u32	k;      /* Generic multiuse field */
+};
+
+struct sock_fprog {	/* Required for SO_ATTACH_FILTER. */
+	unsigned short		len;	/* Number of filter blocks */
+	struct sock_filter __user *filter;
+};
+
+/*
+ * Instruction classes
+ */
+
+#define BPF_CLASS(code) ((code) & 0x07)
+#define         BPF_LD          0x00
+#define         BPF_LDX         0x01
+#define         BPF_ST          0x02
+#define         BPF_STX         0x03
+#define         BPF_ALU         0x04
+#define         BPF_JMP         0x05
+#define         BPF_RET         0x06
+#define         BPF_MISC        0x07
+
+/* ld/ldx fields */
+#define BPF_SIZE(code)  ((code) & 0x18)
+#define         BPF_W           0x00
+#define         BPF_H           0x08
+#define         BPF_B           0x10
+#define BPF_MODE(code)  ((code) & 0xe0)
+#define         BPF_IMM         0x00
+#define         BPF_ABS         0x20
+#define         BPF_IND         0x40
+#define         BPF_MEM         0x60
+#define         BPF_LEN         0x80
+#define         BPF_MSH         0xa0
+
+/* alu/jmp fields */
+#define BPF_OP(code)    ((code) & 0xf0)
+#define         BPF_ADD         0x00
+#define         BPF_SUB         0x10
+#define         BPF_MUL         0x20
+#define         BPF_DIV         0x30
+#define         BPF_OR          0x40
+#define         BPF_AND         0x50
+#define         BPF_LSH         0x60
+#define         BPF_RSH         0x70
+#define         BPF_NEG         0x80
+#define         BPF_JA          0x00
+#define         BPF_JEQ         0x10
+#define         BPF_JGT         0x20
+#define         BPF_JGE         0x30
+#define         BPF_JSET        0x40
+#define BPF_SRC(code)   ((code) & 0x08)
+#define         BPF_K           0x00
+#define         BPF_X           0x08
+
+/* ret - BPF_K and BPF_X also apply */
+#define BPF_RVAL(code)  ((code) & 0x18)
+#define         BPF_A           0x10
+
+/* misc */
+#define BPF_MISCOP(code) ((code) & 0xf8)
+#define         BPF_TAX         0x00
+#define         BPF_TXA         0x80
+
+#ifndef BPF_MAXINSNS
+#define BPF_MAXINSNS 4096
+#endif
+
+/*
+ * Macros for filter block array initializers.
+ */
+#ifndef BPF_STMT
+#define BPF_STMT(code, k) { (unsigned short)(code), 0, 0, k }
+#endif
+#ifndef BPF_JUMP
+#define BPF_JUMP(code, k, jt, jf) { (unsigned short)(code), jt, jf, k }
+#endif
+
+/*
+ * Number of scratch memory words for: BPF_ST and BPF_STX
+ */
+#define BPF_MEMWORDS 16
+
+/* RATIONALE. Negative offsets are invalid in BPF.
+   We use them to reference ancillary data.
+   Unlike introduction new instructions, it does not break
+   existing compilers/optimizers.
+ */
+#define SKF_AD_OFF    (-0x1000)
+#define SKF_AD_PROTOCOL 0
+#define SKF_AD_PKTTYPE 	4
+#define SKF_AD_IFINDEX 	8
+#define SKF_AD_NLATTR	12
+#define SKF_AD_NLATTR_NEST	16
+#define SKF_AD_MARK 	20
+#define SKF_AD_QUEUE	24
+#define SKF_AD_HATYPE	28
+#define SKF_AD_RXHASH	32
+#define SKF_AD_CPU	36
+#define SKF_AD_MAX	40
+#define SKF_NET_OFF   (-0x100000)
+#define SKF_LL_OFF    (-0x200000)
+
+#ifdef __KERNEL__
+
+struct sk_buff;
+struct sock;
+
+struct sk_filter
+{
+	atomic_t		refcnt;
+	unsigned int         	len;	/* Number of filter blocks */
+	unsigned int		(*bpf_func)(const struct sk_buff *skb,
+					    const struct sock_filter *filter);
+	struct rcu_head		rcu;
+	struct sock_filter     	insns[0];
+};
+
+static inline unsigned int sk_filter_len(const struct sk_filter *fp)
+{
+	return fp->len * sizeof(struct sock_filter) + sizeof(*fp);
+}
+
+extern int sk_filter(struct sock *sk, struct sk_buff *skb);
+extern unsigned int sk_run_filter(const struct sk_buff *skb,
+				  const struct sock_filter *filter);
+extern int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk);
+extern int sk_detach_filter(struct sock *sk);
+extern int sk_chk_filter(struct sock_filter *filter, unsigned int flen);
+
+#ifdef CONFIG_BPF_JIT
+extern void bpf_jit_compile(struct sk_filter *fp);
+extern void bpf_jit_free(struct sk_filter *fp);
+#define SK_RUN_FILTER(FILTER, SKB) (*FILTER->bpf_func)(SKB, FILTER->insns)
+#else
+static inline void bpf_jit_compile(struct sk_filter *fp)
+{
+}
+static inline void bpf_jit_free(struct sk_filter *fp)
+{
+}
+#define SK_RUN_FILTER(FILTER, SKB) sk_run_filter(SKB, FILTER->insns)
+#endif
+
+enum {
+	BPF_S_RET_K = 1,
+	BPF_S_RET_A,
+	BPF_S_ALU_ADD_K,
+	BPF_S_ALU_ADD_X,
+	BPF_S_ALU_SUB_K,
+	BPF_S_ALU_SUB_X,
+	BPF_S_ALU_MUL_K,
+	BPF_S_ALU_MUL_X,
+	BPF_S_ALU_DIV_X,
+	BPF_S_ALU_AND_K,
+	BPF_S_ALU_AND_X,
+	BPF_S_ALU_OR_K,
+	BPF_S_ALU_OR_X,
+	BPF_S_ALU_LSH_K,
+	BPF_S_ALU_LSH_X,
+	BPF_S_ALU_RSH_K,
+	BPF_S_ALU_RSH_X,
+	BPF_S_ALU_NEG,
+	BPF_S_LD_W_ABS,
+	BPF_S_LD_H_ABS,
+	BPF_S_LD_B_ABS,
+	BPF_S_LD_W_LEN,
+	BPF_S_LD_W_IND,
+	BPF_S_LD_H_IND,
+	BPF_S_LD_B_IND,
+	BPF_S_LD_IMM,
+	BPF_S_LDX_W_LEN,
+	BPF_S_LDX_B_MSH,
+	BPF_S_LDX_IMM,
+	BPF_S_MISC_TAX,
+	BPF_S_MISC_TXA,
+	BPF_S_ALU_DIV_K,
+	BPF_S_LD_MEM,
+	BPF_S_LDX_MEM,
+	BPF_S_ST,
+	BPF_S_STX,
+	BPF_S_JMP_JA,
+	BPF_S_JMP_JEQ_K,
+	BPF_S_JMP_JEQ_X,
+	BPF_S_JMP_JGE_K,
+	BPF_S_JMP_JGE_X,
+	BPF_S_JMP_JGT_K,
+	BPF_S_JMP_JGT_X,
+	BPF_S_JMP_JSET_K,
+	BPF_S_JMP_JSET_X,
+	/* Ancillary data */
+	BPF_S_ANC_PROTOCOL,
+	BPF_S_ANC_PKTTYPE,
+	BPF_S_ANC_IFINDEX,
+	BPF_S_ANC_NLATTR,
+	BPF_S_ANC_NLATTR_NEST,
+	BPF_S_ANC_MARK,
+	BPF_S_ANC_QUEUE,
+	BPF_S_ANC_HATYPE,
+	BPF_S_ANC_RXHASH,
+	BPF_S_ANC_CPU,
+};
+
+#endif /* __KERNEL__ */
+
+#endif /* __LINUX_FILTER_H__ */
diff --git a/include/linux/fips.h b/include/linux/fips.h
new file mode 100644
index 00000000..f8fb07b0
--- /dev/null
+++ b/include/linux/fips.h
@@ -0,0 +1,10 @@
+#ifndef _FIPS_H
+#define _FIPS_H
+
+#ifdef CONFIG_CRYPTO_FIPS
+extern int fips_enabled;
+#else
+#define fips_enabled 0
+#endif
+
+#endif
diff --git a/include/linux/firewire-cdev.h b/include/linux/firewire-cdev.h
new file mode 100644
index 00000000..d5003695
--- /dev/null
+++ b/include/linux/firewire-cdev.h
@@ -0,0 +1,1039 @@
+/*
+ * Char device interface.
+ *
+ * Copyright (C) 2005-2007  Kristian Hoegsberg <krh@bitplanet.net>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _LINUX_FIREWIRE_CDEV_H
+#define _LINUX_FIREWIRE_CDEV_H
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+#include <linux/firewire-constants.h>
+
+/* available since kernel version 2.6.22 */
+#define FW_CDEV_EVENT_BUS_RESET				0x00
+#define FW_CDEV_EVENT_RESPONSE				0x01
+#define FW_CDEV_EVENT_REQUEST				0x02
+#define FW_CDEV_EVENT_ISO_INTERRUPT			0x03
+
+/* available since kernel version 2.6.30 */
+#define FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED		0x04
+#define FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED		0x05
+
+/* available since kernel version 2.6.36 */
+#define FW_CDEV_EVENT_REQUEST2				0x06
+#define FW_CDEV_EVENT_PHY_PACKET_SENT			0x07
+#define FW_CDEV_EVENT_PHY_PACKET_RECEIVED		0x08
+#define FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL	0x09
+
+/**
+ * struct fw_cdev_event_common - Common part of all fw_cdev_event_ types
+ * @closure:	For arbitrary use by userspace
+ * @type:	Discriminates the fw_cdev_event_ types
+ *
+ * This struct may be used to access generic members of all fw_cdev_event_
+ * types regardless of the specific type.
+ *
+ * Data passed in the @closure field for a request will be returned in the
+ * corresponding event.  It is big enough to hold a pointer on all platforms.
+ * The ioctl used to set @closure depends on the @type of event.
+ */
+struct fw_cdev_event_common {
+	__u64 closure;
+	__u32 type;
+};
+
+/**
+ * struct fw_cdev_event_bus_reset - Sent when a bus reset occurred
+ * @closure:	See &fw_cdev_event_common; set by %FW_CDEV_IOC_GET_INFO ioctl
+ * @type:	See &fw_cdev_event_common; always %FW_CDEV_EVENT_BUS_RESET
+ * @node_id:       New node ID of this node
+ * @local_node_id: Node ID of the local node, i.e. of the controller
+ * @bm_node_id:    Node ID of the bus manager
+ * @irm_node_id:   Node ID of the iso resource manager
+ * @root_node_id:  Node ID of the root node
+ * @generation:    New bus generation
+ *
+ * This event is sent when the bus the device belongs to goes through a bus
+ * reset.  It provides information about the new bus configuration, such as
+ * new node ID for this device, new root ID, and others.
+ *
+ * If @bm_node_id is 0xffff right after bus reset it can be reread by an
+ * %FW_CDEV_IOC_GET_INFO ioctl after bus manager selection was finished.
+ * Kernels with ABI version < 4 do not set @bm_node_id.
+ */
+struct fw_cdev_event_bus_reset {
+	__u64 closure;
+	__u32 type;
+	__u32 node_id;
+	__u32 local_node_id;
+	__u32 bm_node_id;
+	__u32 irm_node_id;
+	__u32 root_node_id;
+	__u32 generation;
+};
+
+/**
+ * struct fw_cdev_event_response - Sent when a response packet was received
+ * @closure:	See &fw_cdev_event_common; set by %FW_CDEV_IOC_SEND_REQUEST
+ *		or %FW_CDEV_IOC_SEND_BROADCAST_REQUEST
+ *		or %FW_CDEV_IOC_SEND_STREAM_PACKET ioctl
+ * @type:	See &fw_cdev_event_common; always %FW_CDEV_EVENT_RESPONSE
+ * @rcode:	Response code returned by the remote node
+ * @length:	Data length, i.e. the response's payload size in bytes
+ * @data:	Payload data, if any
+ *
+ * This event is sent when the stack receives a response to an outgoing request
+ * sent by %FW_CDEV_IOC_SEND_REQUEST ioctl.  The payload data for responses
+ * carrying data (read and lock responses) follows immediately and can be
+ * accessed through the @data field.
+ *
+ * The event is also generated after conclusions of transactions that do not
+ * involve response packets.  This includes unified write transactions,
+ * broadcast write transactions, and transmission of asynchronous stream
+ * packets.  @rcode indicates success or failure of such transmissions.
+ */
+struct fw_cdev_event_response {
+	__u64 closure;
+	__u32 type;
+	__u32 rcode;
+	__u32 length;
+	__u32 data[0];
+};
+
+/**
+ * struct fw_cdev_event_request - Old version of &fw_cdev_event_request2
+ * @type:	See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST
+ *
+ * This event is sent instead of &fw_cdev_event_request2 if the kernel or
+ * the client implements ABI version <= 3.  &fw_cdev_event_request lacks
+ * essential information; use &fw_cdev_event_request2 instead.
+ */
+struct fw_cdev_event_request {
+	__u64 closure;
+	__u32 type;
+	__u32 tcode;
+	__u64 offset;
+	__u32 handle;
+	__u32 length;
+	__u32 data[0];
+};
+
+/**
+ * struct fw_cdev_event_request2 - Sent on incoming request to an address region
+ * @closure:	See &fw_cdev_event_common; set by %FW_CDEV_IOC_ALLOCATE ioctl
+ * @type:	See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST2
+ * @tcode:	Transaction code of the incoming request
+ * @offset:	The offset into the 48-bit per-node address space
+ * @source_node_id: Sender node ID
+ * @destination_node_id: Destination node ID
+ * @card:	The index of the card from which the request came
+ * @generation:	Bus generation in which the request is valid
+ * @handle:	Reference to the kernel-side pending request
+ * @length:	Data length, i.e. the request's payload size in bytes
+ * @data:	Incoming data, if any
+ *
+ * This event is sent when the stack receives an incoming request to an address
+ * region registered using the %FW_CDEV_IOC_ALLOCATE ioctl.  The request is
+ * guaranteed to be completely contained in the specified region.  Userspace is
+ * responsible for sending the response by %FW_CDEV_IOC_SEND_RESPONSE ioctl,
+ * using the same @handle.
+ *
+ * The payload data for requests carrying data (write and lock requests)
+ * follows immediately and can be accessed through the @data field.
+ *
+ * Unlike &fw_cdev_event_request, @tcode of lock requests is one of the
+ * firewire-core specific %TCODE_LOCK_MASK_SWAP...%TCODE_LOCK_VENDOR_DEPENDENT,
+ * i.e. encodes the extended transaction code.
+ *
+ * @card may differ from &fw_cdev_get_info.card because requests are received
+ * from all cards of the Linux host.  @source_node_id, @destination_node_id, and
+ * @generation pertain to that card.  Destination node ID and bus generation may
+ * therefore differ from the corresponding fields of the last
+ * &fw_cdev_event_bus_reset.
+ *
+ * @destination_node_id may also differ from the current node ID because of a
+ * non-local bus ID part or in case of a broadcast write request.  Note, a
+ * client must call an %FW_CDEV_IOC_SEND_RESPONSE ioctl even in case of a
+ * broadcast write request; the kernel will then release the kernel-side pending
+ * request but will not actually send a response packet.
+ *
+ * In case of a write request to FCP_REQUEST or FCP_RESPONSE, the kernel already
+ * sent a write response immediately after the request was received; in this
+ * case the client must still call an %FW_CDEV_IOC_SEND_RESPONSE ioctl to
+ * release the kernel-side pending request, though another response won't be
+ * sent.
+ *
+ * If the client subsequently needs to initiate requests to the sender node of
+ * an &fw_cdev_event_request2, it needs to use a device file with matching
+ * card index, node ID, and generation for outbound requests.
+ */
+struct fw_cdev_event_request2 {
+	__u64 closure;
+	__u32 type;
+	__u32 tcode;
+	__u64 offset;
+	__u32 source_node_id;
+	__u32 destination_node_id;
+	__u32 card;
+	__u32 generation;
+	__u32 handle;
+	__u32 length;
+	__u32 data[0];
+};
+
+/**
+ * struct fw_cdev_event_iso_interrupt - Sent when an iso packet was completed
+ * @closure:	See &fw_cdev_event_common;
+ *		set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl
+ * @type:	See &fw_cdev_event_common; always %FW_CDEV_EVENT_ISO_INTERRUPT
+ * @cycle:	Cycle counter of the last completed packet
+ * @header_length: Total length of following headers, in bytes
+ * @header:	Stripped headers, if any
+ *
+ * This event is sent when the controller has completed an &fw_cdev_iso_packet
+ * with the %FW_CDEV_ISO_INTERRUPT bit set, when explicitly requested with
+ * %FW_CDEV_IOC_FLUSH_ISO, or when there have been so many completed packets
+ * without the interrupt bit set that the kernel's internal buffer for @header
+ * is about to overflow.  (In the last case, kernels with ABI version < 5 drop
+ * header data up to the next interrupt packet.)
+ *
+ * Isochronous transmit events (context type %FW_CDEV_ISO_CONTEXT_TRANSMIT):
+ *
+ * In version 3 and some implementations of version 2 of the ABI, &header_length
+ * is a multiple of 4 and &header contains timestamps of all packets up until
+ * the interrupt packet.  The format of the timestamps is as described below for
+ * isochronous reception.  In version 1 of the ABI, &header_length was 0.
+ *
+ * Isochronous receive events (context type %FW_CDEV_ISO_CONTEXT_RECEIVE):
+ *
+ * The headers stripped of all packets up until and including the interrupt
+ * packet are returned in the @header field.  The amount of header data per
+ * packet is as specified at iso context creation by
+ * &fw_cdev_create_iso_context.header_size.
+ *
+ * Hence, _interrupt.header_length / _context.header_size is the number of
+ * packets received in this interrupt event.  The client can now iterate
+ * through the mmap()'ed DMA buffer according to this number of packets and
+ * to the buffer sizes as the client specified in &fw_cdev_queue_iso.
+ *
+ * Since version 2 of this ABI, the portion for each packet in _interrupt.header
+ * consists of the 1394 isochronous packet header, followed by a timestamp
+ * quadlet if &fw_cdev_create_iso_context.header_size > 4, followed by quadlets
+ * from the packet payload if &fw_cdev_create_iso_context.header_size > 8.
+ *
+ * Format of 1394 iso packet header:  16 bits data_length, 2 bits tag, 6 bits
+ * channel, 4 bits tcode, 4 bits sy, in big endian byte order.
+ * data_length is the actual received size of the packet without the four
+ * 1394 iso packet header bytes.
+ *
+ * Format of timestamp:  16 bits invalid, 3 bits cycleSeconds, 13 bits
+ * cycleCount, in big endian byte order.
+ *
+ * In version 1 of the ABI, no timestamp quadlet was inserted; instead, payload
+ * data followed directly after the 1394 is header if header_size > 4.
+ * Behaviour of ver. 1 of this ABI is no longer available since ABI ver. 2.
+ */
+struct fw_cdev_event_iso_interrupt {
+	__u64 closure;
+	__u32 type;
+	__u32 cycle;
+	__u32 header_length;
+	__u32 header[0];
+};
+
+/**
+ * struct fw_cdev_event_iso_interrupt_mc - An iso buffer chunk was completed
+ * @closure:	See &fw_cdev_event_common;
+ *		set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl
+ * @type:	%FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL
+ * @completed:	Offset into the receive buffer; data before this offset is valid
+ *
+ * This event is sent in multichannel contexts (context type
+ * %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL) for &fw_cdev_iso_packet buffer
+ * chunks that have been completely filled and that have the
+ * %FW_CDEV_ISO_INTERRUPT bit set, or when explicitly requested with
+ * %FW_CDEV_IOC_FLUSH_ISO.
+ *
+ * The buffer is continuously filled with the following data, per packet:
+ *  - the 1394 iso packet header as described at &fw_cdev_event_iso_interrupt,
+ *    but in little endian byte order,
+ *  - packet payload (as many bytes as specified in the data_length field of
+ *    the 1394 iso packet header) in big endian byte order,
+ *  - 0...3 padding bytes as needed to align the following trailer quadlet,
+ *  - trailer quadlet, containing the reception timestamp as described at
+ *    &fw_cdev_event_iso_interrupt, but in little endian byte order.
+ *
+ * Hence the per-packet size is data_length (rounded up to a multiple of 4) + 8.
+ * When processing the data, stop before a packet that would cross the
+ * @completed offset.
+ *
+ * A packet near the end of a buffer chunk will typically spill over into the
+ * next queued buffer chunk.  It is the responsibility of the client to check
+ * for this condition, assemble a broken-up packet from its parts, and not to
+ * re-queue any buffer chunks in which as yet unread packet parts reside.
+ */
+struct fw_cdev_event_iso_interrupt_mc {
+	__u64 closure;
+	__u32 type;
+	__u32 completed;
+};
+
+/**
+ * struct fw_cdev_event_iso_resource - Iso resources were allocated or freed
+ * @closure:	See &fw_cdev_event_common;
+ *		set by %FW_CDEV_IOC_(DE)ALLOCATE_ISO_RESOURCE(_ONCE) ioctl
+ * @type:	%FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED or
+ *		%FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED
+ * @handle:	Reference by which an allocated resource can be deallocated
+ * @channel:	Isochronous channel which was (de)allocated, if any
+ * @bandwidth:	Bandwidth allocation units which were (de)allocated, if any
+ *
+ * An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED event is sent after an isochronous
+ * resource was allocated at the IRM.  The client has to check @channel and
+ * @bandwidth for whether the allocation actually succeeded.
+ *
+ * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event is sent after an isochronous
+ * resource was deallocated at the IRM.  It is also sent when automatic
+ * reallocation after a bus reset failed.
+ *
+ * @channel is <0 if no channel was (de)allocated or if reallocation failed.
+ * @bandwidth is 0 if no bandwidth was (de)allocated or if reallocation failed.
+ */
+struct fw_cdev_event_iso_resource {
+	__u64 closure;
+	__u32 type;
+	__u32 handle;
+	__s32 channel;
+	__s32 bandwidth;
+};
+
+/**
+ * struct fw_cdev_event_phy_packet - A PHY packet was transmitted or received
+ * @closure:	See &fw_cdev_event_common; set by %FW_CDEV_IOC_SEND_PHY_PACKET
+ *		or %FW_CDEV_IOC_RECEIVE_PHY_PACKETS ioctl
+ * @type:	%FW_CDEV_EVENT_PHY_PACKET_SENT or %..._RECEIVED
+ * @rcode:	%RCODE_..., indicates success or failure of transmission
+ * @length:	Data length in bytes
+ * @data:	Incoming data
+ *
+ * If @type is %FW_CDEV_EVENT_PHY_PACKET_SENT, @length is 0 and @data empty,
+ * except in case of a ping packet:  Then, @length is 4, and @data[0] is the
+ * ping time in 49.152MHz clocks if @rcode is %RCODE_COMPLETE.
+ *
+ * If @type is %FW_CDEV_EVENT_PHY_PACKET_RECEIVED, @length is 8 and @data
+ * consists of the two PHY packet quadlets, in host byte order.
+ */
+struct fw_cdev_event_phy_packet {
+	__u64 closure;
+	__u32 type;
+	__u32 rcode;
+	__u32 length;
+	__u32 data[0];
+};
+
+/**
+ * union fw_cdev_event - Convenience union of fw_cdev_event_ types
+ * @common:		Valid for all types
+ * @bus_reset:		Valid if @common.type == %FW_CDEV_EVENT_BUS_RESET
+ * @response:		Valid if @common.type == %FW_CDEV_EVENT_RESPONSE
+ * @request:		Valid if @common.type == %FW_CDEV_EVENT_REQUEST
+ * @request2:		Valid if @common.type == %FW_CDEV_EVENT_REQUEST2
+ * @iso_interrupt:	Valid if @common.type == %FW_CDEV_EVENT_ISO_INTERRUPT
+ * @iso_interrupt_mc:	Valid if @common.type ==
+ *				%FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL
+ * @iso_resource:	Valid if @common.type ==
+ *				%FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED or
+ *				%FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED
+ * @phy_packet:		Valid if @common.type ==
+ *				%FW_CDEV_EVENT_PHY_PACKET_SENT or
+ *				%FW_CDEV_EVENT_PHY_PACKET_RECEIVED
+ *
+ * Convenience union for userspace use.  Events could be read(2) into an
+ * appropriately aligned char buffer and then cast to this union for further
+ * processing.  Note that for a request, response or iso_interrupt event,
+ * the data[] or header[] may make the size of the full event larger than
+ * sizeof(union fw_cdev_event).  Also note that if you attempt to read(2)
+ * an event into a buffer that is not large enough for it, the data that does
+ * not fit will be discarded so that the next read(2) will return a new event.
+ */
+union fw_cdev_event {
+	struct fw_cdev_event_common		common;
+	struct fw_cdev_event_bus_reset		bus_reset;
+	struct fw_cdev_event_response		response;
+	struct fw_cdev_event_request		request;
+	struct fw_cdev_event_request2		request2;		/* added in 2.6.36 */
+	struct fw_cdev_event_iso_interrupt	iso_interrupt;
+	struct fw_cdev_event_iso_interrupt_mc	iso_interrupt_mc;	/* added in 2.6.36 */
+	struct fw_cdev_event_iso_resource	iso_resource;		/* added in 2.6.30 */
+	struct fw_cdev_event_phy_packet		phy_packet;		/* added in 2.6.36 */
+};
+
+/* available since kernel version 2.6.22 */
+#define FW_CDEV_IOC_GET_INFO           _IOWR('#', 0x00, struct fw_cdev_get_info)
+#define FW_CDEV_IOC_SEND_REQUEST        _IOW('#', 0x01, struct fw_cdev_send_request)
+#define FW_CDEV_IOC_ALLOCATE           _IOWR('#', 0x02, struct fw_cdev_allocate)
+#define FW_CDEV_IOC_DEALLOCATE          _IOW('#', 0x03, struct fw_cdev_deallocate)
+#define FW_CDEV_IOC_SEND_RESPONSE       _IOW('#', 0x04, struct fw_cdev_send_response)
+#define FW_CDEV_IOC_INITIATE_BUS_RESET  _IOW('#', 0x05, struct fw_cdev_initiate_bus_reset)
+#define FW_CDEV_IOC_ADD_DESCRIPTOR     _IOWR('#', 0x06, struct fw_cdev_add_descriptor)
+#define FW_CDEV_IOC_REMOVE_DESCRIPTOR   _IOW('#', 0x07, struct fw_cdev_remove_descriptor)
+#define FW_CDEV_IOC_CREATE_ISO_CONTEXT _IOWR('#', 0x08, struct fw_cdev_create_iso_context)
+#define FW_CDEV_IOC_QUEUE_ISO          _IOWR('#', 0x09, struct fw_cdev_queue_iso)
+#define FW_CDEV_IOC_START_ISO           _IOW('#', 0x0a, struct fw_cdev_start_iso)
+#define FW_CDEV_IOC_STOP_ISO            _IOW('#', 0x0b, struct fw_cdev_stop_iso)
+
+/* available since kernel version 2.6.24 */
+#define FW_CDEV_IOC_GET_CYCLE_TIMER     _IOR('#', 0x0c, struct fw_cdev_get_cycle_timer)
+
+/* available since kernel version 2.6.30 */
+#define FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE       _IOWR('#', 0x0d, struct fw_cdev_allocate_iso_resource)
+#define FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE      _IOW('#', 0x0e, struct fw_cdev_deallocate)
+#define FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE   _IOW('#', 0x0f, struct fw_cdev_allocate_iso_resource)
+#define FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE_ONCE _IOW('#', 0x10, struct fw_cdev_allocate_iso_resource)
+#define FW_CDEV_IOC_GET_SPEED                     _IO('#', 0x11) /* returns speed code */
+#define FW_CDEV_IOC_SEND_BROADCAST_REQUEST       _IOW('#', 0x12, struct fw_cdev_send_request)
+#define FW_CDEV_IOC_SEND_STREAM_PACKET           _IOW('#', 0x13, struct fw_cdev_send_stream_packet)
+
+/* available since kernel version 2.6.34 */
+#define FW_CDEV_IOC_GET_CYCLE_TIMER2   _IOWR('#', 0x14, struct fw_cdev_get_cycle_timer2)
+
+/* available since kernel version 2.6.36 */
+#define FW_CDEV_IOC_SEND_PHY_PACKET    _IOWR('#', 0x15, struct fw_cdev_send_phy_packet)
+#define FW_CDEV_IOC_RECEIVE_PHY_PACKETS _IOW('#', 0x16, struct fw_cdev_receive_phy_packets)
+#define FW_CDEV_IOC_SET_ISO_CHANNELS    _IOW('#', 0x17, struct fw_cdev_set_iso_channels)
+
+/* available since kernel version 3.4 */
+#define FW_CDEV_IOC_FLUSH_ISO           _IOW('#', 0x18, struct fw_cdev_flush_iso)
+
+/*
+ * ABI version history
+ *  1  (2.6.22)  - initial version
+ *     (2.6.24)  - added %FW_CDEV_IOC_GET_CYCLE_TIMER
+ *  2  (2.6.30)  - changed &fw_cdev_event_iso_interrupt.header if
+ *                 &fw_cdev_create_iso_context.header_size is 8 or more
+ *               - added %FW_CDEV_IOC_*_ISO_RESOURCE*,
+ *                 %FW_CDEV_IOC_GET_SPEED, %FW_CDEV_IOC_SEND_BROADCAST_REQUEST,
+ *                 %FW_CDEV_IOC_SEND_STREAM_PACKET
+ *     (2.6.32)  - added time stamp to xmit &fw_cdev_event_iso_interrupt
+ *     (2.6.33)  - IR has always packet-per-buffer semantics now, not one of
+ *                 dual-buffer or packet-per-buffer depending on hardware
+ *               - shared use and auto-response for FCP registers
+ *  3  (2.6.34)  - made &fw_cdev_get_cycle_timer reliable
+ *               - added %FW_CDEV_IOC_GET_CYCLE_TIMER2
+ *  4  (2.6.36)  - added %FW_CDEV_EVENT_REQUEST2, %FW_CDEV_EVENT_PHY_PACKET_*,
+ *                 and &fw_cdev_allocate.region_end
+ *               - implemented &fw_cdev_event_bus_reset.bm_node_id
+ *               - added %FW_CDEV_IOC_SEND_PHY_PACKET, _RECEIVE_PHY_PACKETS
+ *               - added %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL,
+ *                 %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL, and
+ *                 %FW_CDEV_IOC_SET_ISO_CHANNELS
+ *  5  (3.4)     - send %FW_CDEV_EVENT_ISO_INTERRUPT events when needed to
+ *                 avoid dropping data
+ *               - added %FW_CDEV_IOC_FLUSH_ISO
+ */
+
+/**
+ * struct fw_cdev_get_info - General purpose information ioctl
+ * @version:	The version field is just a running serial number.  Both an
+ *		input parameter (ABI version implemented by the client) and
+ *		output parameter (ABI version implemented by the kernel).
+ *		A client shall fill in the ABI @version for which the client
+ *		was implemented.  This is necessary for forward compatibility.
+ * @rom_length:	If @rom is non-zero, up to @rom_length bytes of Configuration
+ *		ROM will be copied into that user space address.  In either
+ *		case, @rom_length is updated with the actual length of the
+ *		Configuration ROM.
+ * @rom:	If non-zero, address of a buffer to be filled by a copy of the
+ *		device's Configuration ROM
+ * @bus_reset:	If non-zero, address of a buffer to be filled by a
+ *		&struct fw_cdev_event_bus_reset with the current state
+ *		of the bus.  This does not cause a bus reset to happen.
+ * @bus_reset_closure: Value of &closure in this and subsequent bus reset events
+ * @card:	The index of the card this device belongs to
+ *
+ * The %FW_CDEV_IOC_GET_INFO ioctl is usually the very first one which a client
+ * performs right after it opened a /dev/fw* file.
+ *
+ * As a side effect, reception of %FW_CDEV_EVENT_BUS_RESET events to be read(2)
+ * is started by this ioctl.
+ */
+struct fw_cdev_get_info {
+	__u32 version;
+	__u32 rom_length;
+	__u64 rom;
+	__u64 bus_reset;
+	__u64 bus_reset_closure;
+	__u32 card;
+};
+
+/**
+ * struct fw_cdev_send_request - Send an asynchronous request packet
+ * @tcode:	Transaction code of the request
+ * @length:	Length of outgoing payload, in bytes
+ * @offset:	48-bit offset at destination node
+ * @closure:	Passed back to userspace in the response event
+ * @data:	Userspace pointer to payload
+ * @generation:	The bus generation where packet is valid
+ *
+ * Send a request to the device.  This ioctl implements all outgoing requests.
+ * Both quadlet and block request specify the payload as a pointer to the data
+ * in the @data field.  Once the transaction completes, the kernel writes an
+ * &fw_cdev_event_response event back.  The @closure field is passed back to
+ * user space in the response event.
+ */
+struct fw_cdev_send_request {
+	__u32 tcode;
+	__u32 length;
+	__u64 offset;
+	__u64 closure;
+	__u64 data;
+	__u32 generation;
+};
+
+/**
+ * struct fw_cdev_send_response - Send an asynchronous response packet
+ * @rcode:	Response code as determined by the userspace handler
+ * @length:	Length of outgoing payload, in bytes
+ * @data:	Userspace pointer to payload
+ * @handle:	The handle from the &fw_cdev_event_request
+ *
+ * Send a response to an incoming request.  By setting up an address range using
+ * the %FW_CDEV_IOC_ALLOCATE ioctl, userspace can listen for incoming requests.  An
+ * incoming request will generate an %FW_CDEV_EVENT_REQUEST, and userspace must
+ * send a reply using this ioctl.  The event has a handle to the kernel-side
+ * pending transaction, which should be used with this ioctl.
+ */
+struct fw_cdev_send_response {
+	__u32 rcode;
+	__u32 length;
+	__u64 data;
+	__u32 handle;
+};
+
+/**
+ * struct fw_cdev_allocate - Allocate a CSR in an address range
+ * @offset:	Start offset of the address range
+ * @closure:	To be passed back to userspace in request events
+ * @length:	Length of the CSR, in bytes
+ * @handle:	Handle to the allocation, written by the kernel
+ * @region_end:	First address above the address range (added in ABI v4, 2.6.36)
+ *
+ * Allocate an address range in the 48-bit address space on the local node
+ * (the controller).  This allows userspace to listen for requests with an
+ * offset within that address range.  Every time when the kernel receives a
+ * request within the range, an &fw_cdev_event_request2 event will be emitted.
+ * (If the kernel or the client implements ABI version <= 3, an
+ * &fw_cdev_event_request will be generated instead.)
+ *
+ * The @closure field is passed back to userspace in these request events.
+ * The @handle field is an out parameter, returning a handle to the allocated
+ * range to be used for later deallocation of the range.
+ *
+ * The address range is allocated on all local nodes.  The address allocation
+ * is exclusive except for the FCP command and response registers.  If an
+ * exclusive address region is already in use, the ioctl fails with errno set
+ * to %EBUSY.
+ *
+ * If kernel and client implement ABI version >= 4, the kernel looks up a free
+ * spot of size @length inside [@offset..@region_end) and, if found, writes
+ * the start address of the new CSR back in @offset.  I.e. @offset is an
+ * in and out parameter.  If this automatic placement of a CSR in a bigger
+ * address range is not desired, the client simply needs to set @region_end
+ * = @offset + @length.
+ *
+ * If the kernel or the client implements ABI version <= 3, @region_end is
+ * ignored and effectively assumed to be @offset + @length.
+ *
+ * @region_end is only present in a kernel header >= 2.6.36.  If necessary,
+ * this can for example be tested by #ifdef FW_CDEV_EVENT_REQUEST2.
+ */
+struct fw_cdev_allocate {
+	__u64 offset;
+	__u64 closure;
+	__u32 length;
+	__u32 handle;
+	__u64 region_end;	/* available since kernel version 2.6.36 */
+};
+
+/**
+ * struct fw_cdev_deallocate - Free a CSR address range or isochronous resource
+ * @handle:	Handle to the address range or iso resource, as returned by the
+ *		kernel when the range or resource was allocated
+ */
+struct fw_cdev_deallocate {
+	__u32 handle;
+};
+
+#define FW_CDEV_LONG_RESET	0
+#define FW_CDEV_SHORT_RESET	1
+
+/**
+ * struct fw_cdev_initiate_bus_reset - Initiate a bus reset
+ * @type:	%FW_CDEV_SHORT_RESET or %FW_CDEV_LONG_RESET
+ *
+ * Initiate a bus reset for the bus this device is on.  The bus reset can be
+ * either the original (long) bus reset or the arbitrated (short) bus reset
+ * introduced in 1394a-2000.
+ *
+ * The ioctl returns immediately.  A subsequent &fw_cdev_event_bus_reset
+ * indicates when the reset actually happened.  Since ABI v4, this may be
+ * considerably later than the ioctl because the kernel ensures a grace period
+ * between subsequent bus resets as per IEEE 1394 bus management specification.
+ */
+struct fw_cdev_initiate_bus_reset {
+	__u32 type;
+};
+
+/**
+ * struct fw_cdev_add_descriptor - Add contents to the local node's config ROM
+ * @immediate:	If non-zero, immediate key to insert before pointer
+ * @key:	Upper 8 bits of root directory pointer
+ * @data:	Userspace pointer to contents of descriptor block
+ * @length:	Length of descriptor block data, in quadlets
+ * @handle:	Handle to the descriptor, written by the kernel
+ *
+ * Add a descriptor block and optionally a preceding immediate key to the local
+ * node's Configuration ROM.
+ *
+ * The @key field specifies the upper 8 bits of the descriptor root directory
+ * pointer and the @data and @length fields specify the contents. The @key
+ * should be of the form 0xXX000000. The offset part of the root directory entry
+ * will be filled in by the kernel.
+ *
+ * If not 0, the @immediate field specifies an immediate key which will be
+ * inserted before the root directory pointer.
+ *
+ * @immediate, @key, and @data array elements are CPU-endian quadlets.
+ *
+ * If successful, the kernel adds the descriptor and writes back a @handle to
+ * the kernel-side object to be used for later removal of the descriptor block
+ * and immediate key.  The kernel will also generate a bus reset to signal the
+ * change of the Configuration ROM to other nodes.
+ *
+ * This ioctl affects the Configuration ROMs of all local nodes.
+ * The ioctl only succeeds on device files which represent a local node.
+ */
+struct fw_cdev_add_descriptor {
+	__u32 immediate;
+	__u32 key;
+	__u64 data;
+	__u32 length;
+	__u32 handle;
+};
+
+/**
+ * struct fw_cdev_remove_descriptor - Remove contents from the Configuration ROM
+ * @handle:	Handle to the descriptor, as returned by the kernel when the
+ *		descriptor was added
+ *
+ * Remove a descriptor block and accompanying immediate key from the local
+ * nodes' Configuration ROMs.  The kernel will also generate a bus reset to
+ * signal the change of the Configuration ROM to other nodes.
+ */
+struct fw_cdev_remove_descriptor {
+	__u32 handle;
+};
+
+#define FW_CDEV_ISO_CONTEXT_TRANSMIT			0
+#define FW_CDEV_ISO_CONTEXT_RECEIVE			1
+#define FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL	2 /* added in 2.6.36 */
+
+/**
+ * struct fw_cdev_create_iso_context - Create a context for isochronous I/O
+ * @type:	%FW_CDEV_ISO_CONTEXT_TRANSMIT or %FW_CDEV_ISO_CONTEXT_RECEIVE or
+ *		%FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL
+ * @header_size: Header size to strip in single-channel reception
+ * @channel:	Channel to bind to in single-channel reception or transmission
+ * @speed:	Transmission speed
+ * @closure:	To be returned in &fw_cdev_event_iso_interrupt or
+ *		&fw_cdev_event_iso_interrupt_multichannel
+ * @handle:	Handle to context, written back by kernel
+ *
+ * Prior to sending or receiving isochronous I/O, a context must be created.
+ * The context records information about the transmit or receive configuration
+ * and typically maps to an underlying hardware resource.  A context is set up
+ * for either sending or receiving.  It is bound to a specific isochronous
+ * @channel.
+ *
+ * In case of multichannel reception, @header_size and @channel are ignored
+ * and the channels are selected by %FW_CDEV_IOC_SET_ISO_CHANNELS.
+ *
+ * For %FW_CDEV_ISO_CONTEXT_RECEIVE contexts, @header_size must be at least 4
+ * and must be a multiple of 4.  It is ignored in other context types.
+ *
+ * @speed is ignored in receive context types.
+ *
+ * If a context was successfully created, the kernel writes back a handle to the
+ * context, which must be passed in for subsequent operations on that context.
+ *
+ * Limitations:
+ * No more than one iso context can be created per fd.
+ * The total number of contexts that all userspace and kernelspace drivers can
+ * create on a card at a time is a hardware limit, typically 4 or 8 contexts per
+ * direction, and of them at most one multichannel receive context.
+ */
+struct fw_cdev_create_iso_context {
+	__u32 type;
+	__u32 header_size;
+	__u32 channel;
+	__u32 speed;
+	__u64 closure;
+	__u32 handle;
+};
+
+/**
+ * struct fw_cdev_set_iso_channels - Select channels in multichannel reception
+ * @channels:	Bitmask of channels to listen to
+ * @handle:	Handle of the mutichannel receive context
+ *
+ * @channels is the bitwise or of 1ULL << n for each channel n to listen to.
+ *
+ * The ioctl fails with errno %EBUSY if there is already another receive context
+ * on a channel in @channels.  In that case, the bitmask of all unoccupied
+ * channels is returned in @channels.
+ */
+struct fw_cdev_set_iso_channels {
+	__u64 channels;
+	__u32 handle;
+};
+
+#define FW_CDEV_ISO_PAYLOAD_LENGTH(v)	(v)
+#define FW_CDEV_ISO_INTERRUPT		(1 << 16)
+#define FW_CDEV_ISO_SKIP		(1 << 17)
+#define FW_CDEV_ISO_SYNC		(1 << 17)
+#define FW_CDEV_ISO_TAG(v)		((v) << 18)
+#define FW_CDEV_ISO_SY(v)		((v) << 20)
+#define FW_CDEV_ISO_HEADER_LENGTH(v)	((v) << 24)
+
+/**
+ * struct fw_cdev_iso_packet - Isochronous packet
+ * @control:	Contains the header length (8 uppermost bits),
+ *		the sy field (4 bits), the tag field (2 bits), a sync flag
+ *		or a skip flag (1 bit), an interrupt flag (1 bit), and the
+ *		payload length (16 lowermost bits)
+ * @header:	Header and payload in case of a transmit context.
+ *
+ * &struct fw_cdev_iso_packet is used to describe isochronous packet queues.
+ * Use the FW_CDEV_ISO_ macros to fill in @control.
+ * The @header array is empty in case of receive contexts.
+ *
+ * Context type %FW_CDEV_ISO_CONTEXT_TRANSMIT:
+ *
+ * @control.HEADER_LENGTH must be a multiple of 4.  It specifies the numbers of
+ * bytes in @header that will be prepended to the packet's payload.  These bytes
+ * are copied into the kernel and will not be accessed after the ioctl has
+ * returned.
+ *
+ * The @control.SY and TAG fields are copied to the iso packet header.  These
+ * fields are specified by IEEE 1394a and IEC 61883-1.
+ *
+ * The @control.SKIP flag specifies that no packet is to be sent in a frame.
+ * When using this, all other fields except @control.INTERRUPT must be zero.
+ *
+ * When a packet with the @control.INTERRUPT flag set has been completed, an
+ * &fw_cdev_event_iso_interrupt event will be sent.
+ *
+ * Context type %FW_CDEV_ISO_CONTEXT_RECEIVE:
+ *
+ * @control.HEADER_LENGTH must be a multiple of the context's header_size.
+ * If the HEADER_LENGTH is larger than the context's header_size, multiple
+ * packets are queued for this entry.
+ *
+ * The @control.SY and TAG fields are ignored.
+ *
+ * If the @control.SYNC flag is set, the context drops all packets until a
+ * packet with a sy field is received which matches &fw_cdev_start_iso.sync.
+ *
+ * @control.PAYLOAD_LENGTH defines how many payload bytes can be received for
+ * one packet (in addition to payload quadlets that have been defined as headers
+ * and are stripped and returned in the &fw_cdev_event_iso_interrupt structure).
+ * If more bytes are received, the additional bytes are dropped.  If less bytes
+ * are received, the remaining bytes in this part of the payload buffer will not
+ * be written to, not even by the next packet.  I.e., packets received in
+ * consecutive frames will not necessarily be consecutive in memory.  If an
+ * entry has queued multiple packets, the PAYLOAD_LENGTH is divided equally
+ * among them.
+ *
+ * When a packet with the @control.INTERRUPT flag set has been completed, an
+ * &fw_cdev_event_iso_interrupt event will be sent.  An entry that has queued
+ * multiple receive packets is completed when its last packet is completed.
+ *
+ * Context type %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL:
+ *
+ * Here, &fw_cdev_iso_packet would be more aptly named _iso_buffer_chunk since
+ * it specifies a chunk of the mmap()'ed buffer, while the number and alignment
+ * of packets to be placed into the buffer chunk is not known beforehand.
+ *
+ * @control.PAYLOAD_LENGTH is the size of the buffer chunk and specifies room
+ * for header, payload, padding, and trailer bytes of one or more packets.
+ * It must be a multiple of 4.
+ *
+ * @control.HEADER_LENGTH, TAG and SY are ignored.  SYNC is treated as described
+ * for single-channel reception.
+ *
+ * When a buffer chunk with the @control.INTERRUPT flag set has been filled
+ * entirely, an &fw_cdev_event_iso_interrupt_mc event will be sent.
+ */
+struct fw_cdev_iso_packet {
+	__u32 control;
+	__u32 header[0];
+};
+
+/**
+ * struct fw_cdev_queue_iso - Queue isochronous packets for I/O
+ * @packets:	Userspace pointer to an array of &fw_cdev_iso_packet
+ * @data:	Pointer into mmap()'ed payload buffer
+ * @size:	Size of the @packets array, in bytes
+ * @handle:	Isochronous context handle
+ *
+ * Queue a number of isochronous packets for reception or transmission.
+ * This ioctl takes a pointer to an array of &fw_cdev_iso_packet structs,
+ * which describe how to transmit from or receive into a contiguous region
+ * of a mmap()'ed payload buffer.  As part of transmit packet descriptors,
+ * a series of headers can be supplied, which will be prepended to the
+ * payload during DMA.
+ *
+ * The kernel may or may not queue all packets, but will write back updated
+ * values of the @packets, @data and @size fields, so the ioctl can be
+ * resubmitted easily.
+ *
+ * In case of a multichannel receive context, @data must be quadlet-aligned
+ * relative to the buffer start.
+ */
+struct fw_cdev_queue_iso {
+	__u64 packets;
+	__u64 data;
+	__u32 size;
+	__u32 handle;
+};
+
+#define FW_CDEV_ISO_CONTEXT_MATCH_TAG0		 1
+#define FW_CDEV_ISO_CONTEXT_MATCH_TAG1		 2
+#define FW_CDEV_ISO_CONTEXT_MATCH_TAG2		 4
+#define FW_CDEV_ISO_CONTEXT_MATCH_TAG3		 8
+#define FW_CDEV_ISO_CONTEXT_MATCH_ALL_TAGS	15
+
+/**
+ * struct fw_cdev_start_iso - Start an isochronous transmission or reception
+ * @cycle:	Cycle in which to start I/O.  If @cycle is greater than or
+ *		equal to 0, the I/O will start on that cycle.
+ * @sync:	Determines the value to wait for for receive packets that have
+ *		the %FW_CDEV_ISO_SYNC bit set
+ * @tags:	Tag filter bit mask.  Only valid for isochronous reception.
+ *		Determines the tag values for which packets will be accepted.
+ *		Use FW_CDEV_ISO_CONTEXT_MATCH_ macros to set @tags.
+ * @handle:	Isochronous context handle within which to transmit or receive
+ */
+struct fw_cdev_start_iso {
+	__s32 cycle;
+	__u32 sync;
+	__u32 tags;
+	__u32 handle;
+};
+
+/**
+ * struct fw_cdev_stop_iso - Stop an isochronous transmission or reception
+ * @handle:	Handle of isochronous context to stop
+ */
+struct fw_cdev_stop_iso {
+	__u32 handle;
+};
+
+/**
+ * struct fw_cdev_flush_iso - flush completed iso packets
+ * @handle:	handle of isochronous context to flush
+ *
+ * For %FW_CDEV_ISO_CONTEXT_TRANSMIT or %FW_CDEV_ISO_CONTEXT_RECEIVE contexts,
+ * report any completed packets.
+ *
+ * For %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL contexts, report the current
+ * offset in the receive buffer, if it has changed; this is typically in the
+ * middle of some buffer chunk.
+ *
+ * Any %FW_CDEV_EVENT_ISO_INTERRUPT or %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL
+ * events generated by this ioctl are sent synchronously, i.e., are available
+ * for reading from the file descriptor when this ioctl returns.
+ */
+struct fw_cdev_flush_iso {
+	__u32 handle;
+};
+
+/**
+ * struct fw_cdev_get_cycle_timer - read cycle timer register
+ * @local_time:   system time, in microseconds since the Epoch
+ * @cycle_timer:  Cycle Time register contents
+ *
+ * Same as %FW_CDEV_IOC_GET_CYCLE_TIMER2, but fixed to use %CLOCK_REALTIME
+ * and only with microseconds resolution.
+ *
+ * In version 1 and 2 of the ABI, this ioctl returned unreliable (non-
+ * monotonic) @cycle_timer values on certain controllers.
+ */
+struct fw_cdev_get_cycle_timer {
+	__u64 local_time;
+	__u32 cycle_timer;
+};
+
+/**
+ * struct fw_cdev_get_cycle_timer2 - read cycle timer register
+ * @tv_sec:       system time, seconds
+ * @tv_nsec:      system time, sub-seconds part in nanoseconds
+ * @clk_id:       input parameter, clock from which to get the system time
+ * @cycle_timer:  Cycle Time register contents
+ *
+ * The %FW_CDEV_IOC_GET_CYCLE_TIMER2 ioctl reads the isochronous cycle timer
+ * and also the system clock.  This allows to correlate reception time of
+ * isochronous packets with system time.
+ *
+ * @clk_id lets you choose a clock like with POSIX' clock_gettime function.
+ * Supported @clk_id values are POSIX' %CLOCK_REALTIME and %CLOCK_MONOTONIC
+ * and Linux' %CLOCK_MONOTONIC_RAW.
+ *
+ * @cycle_timer consists of 7 bits cycleSeconds, 13 bits cycleCount, and
+ * 12 bits cycleOffset, in host byte order.  Cf. the Cycle Time register
+ * per IEEE 1394 or Isochronous Cycle Timer register per OHCI-1394.
+ */
+struct fw_cdev_get_cycle_timer2 {
+	__s64 tv_sec;
+	__s32 tv_nsec;
+	__s32 clk_id;
+	__u32 cycle_timer;
+};
+
+/**
+ * struct fw_cdev_allocate_iso_resource - (De)allocate a channel or bandwidth
+ * @closure:	Passed back to userspace in corresponding iso resource events
+ * @channels:	Isochronous channels of which one is to be (de)allocated
+ * @bandwidth:	Isochronous bandwidth units to be (de)allocated
+ * @handle:	Handle to the allocation, written by the kernel (only valid in
+ *		case of %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE ioctls)
+ *
+ * The %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE ioctl initiates allocation of an
+ * isochronous channel and/or of isochronous bandwidth at the isochronous
+ * resource manager (IRM).  Only one of the channels specified in @channels is
+ * allocated.  An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED is sent after
+ * communication with the IRM, indicating success or failure in the event data.
+ * The kernel will automatically reallocate the resources after bus resets.
+ * Should a reallocation fail, an %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event
+ * will be sent.  The kernel will also automatically deallocate the resources
+ * when the file descriptor is closed.
+ *
+ * The %FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE ioctl can be used to initiate
+ * deallocation of resources which were allocated as described above.
+ * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event concludes this operation.
+ *
+ * The %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE ioctl is a variant of allocation
+ * without automatic re- or deallocation.
+ * An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED event concludes this operation,
+ * indicating success or failure in its data.
+ *
+ * The %FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE_ONCE ioctl works like
+ * %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE except that resources are freed
+ * instead of allocated.
+ * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event concludes this operation.
+ *
+ * To summarize, %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE allocates iso resources
+ * for the lifetime of the fd or @handle.
+ * In contrast, %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE allocates iso resources
+ * for the duration of a bus generation.
+ *
+ * @channels is a host-endian bitfield with the least significant bit
+ * representing channel 0 and the most significant bit representing channel 63:
+ * 1ULL << c for each channel c that is a candidate for (de)allocation.
+ *
+ * @bandwidth is expressed in bandwidth allocation units, i.e. the time to send
+ * one quadlet of data (payload or header data) at speed S1600.
+ */
+struct fw_cdev_allocate_iso_resource {
+	__u64 closure;
+	__u64 channels;
+	__u32 bandwidth;
+	__u32 handle;
+};
+
+/**
+ * struct fw_cdev_send_stream_packet - send an asynchronous stream packet
+ * @length:	Length of outgoing payload, in bytes
+ * @tag:	Data format tag
+ * @channel:	Isochronous channel to transmit to
+ * @sy:		Synchronization code
+ * @closure:	Passed back to userspace in the response event
+ * @data:	Userspace pointer to payload
+ * @generation:	The bus generation where packet is valid
+ * @speed:	Speed to transmit at
+ *
+ * The %FW_CDEV_IOC_SEND_STREAM_PACKET ioctl sends an asynchronous stream packet
+ * to every device which is listening to the specified channel.  The kernel
+ * writes an &fw_cdev_event_response event which indicates success or failure of
+ * the transmission.
+ */
+struct fw_cdev_send_stream_packet {
+	__u32 length;
+	__u32 tag;
+	__u32 channel;
+	__u32 sy;
+	__u64 closure;
+	__u64 data;
+	__u32 generation;
+	__u32 speed;
+};
+
+/**
+ * struct fw_cdev_send_phy_packet - send a PHY packet
+ * @closure:	Passed back to userspace in the PHY-packet-sent event
+ * @data:	First and second quadlet of the PHY packet
+ * @generation:	The bus generation where packet is valid
+ *
+ * The %FW_CDEV_IOC_SEND_PHY_PACKET ioctl sends a PHY packet to all nodes
+ * on the same card as this device.  After transmission, an
+ * %FW_CDEV_EVENT_PHY_PACKET_SENT event is generated.
+ *
+ * The payload @data[] shall be specified in host byte order.  Usually,
+ * @data[1] needs to be the bitwise inverse of @data[0].  VersaPHY packets
+ * are an exception to this rule.
+ *
+ * The ioctl is only permitted on device files which represent a local node.
+ */
+struct fw_cdev_send_phy_packet {
+	__u64 closure;
+	__u32 data[2];
+	__u32 generation;
+};
+
+/**
+ * struct fw_cdev_receive_phy_packets - start reception of PHY packets
+ * @closure: Passed back to userspace in phy packet events
+ *
+ * This ioctl activates issuing of %FW_CDEV_EVENT_PHY_PACKET_RECEIVED due to
+ * incoming PHY packets from any node on the same bus as the device.
+ *
+ * The ioctl is only permitted on device files which represent a local node.
+ */
+struct fw_cdev_receive_phy_packets {
+	__u64 closure;
+};
+
+#define FW_CDEV_VERSION 3 /* Meaningless legacy macro; don't use it. */
+
+#endif /* _LINUX_FIREWIRE_CDEV_H */
diff --git a/include/linux/firewire-constants.h b/include/linux/firewire-constants.h
new file mode 100644
index 00000000..9b4bb5fb
--- /dev/null
+++ b/include/linux/firewire-constants.h
@@ -0,0 +1,92 @@
+/*
+ * IEEE 1394 constants.
+ *
+ * Copyright (C) 2005-2007  Kristian Hoegsberg <krh@bitplanet.net>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _LINUX_FIREWIRE_CONSTANTS_H
+#define _LINUX_FIREWIRE_CONSTANTS_H
+
+#define TCODE_WRITE_QUADLET_REQUEST	0x0
+#define TCODE_WRITE_BLOCK_REQUEST	0x1
+#define TCODE_WRITE_RESPONSE		0x2
+#define TCODE_READ_QUADLET_REQUEST	0x4
+#define TCODE_READ_BLOCK_REQUEST	0x5
+#define TCODE_READ_QUADLET_RESPONSE	0x6
+#define TCODE_READ_BLOCK_RESPONSE	0x7
+#define TCODE_CYCLE_START		0x8
+#define TCODE_LOCK_REQUEST		0x9
+#define TCODE_STREAM_DATA		0xa
+#define TCODE_LOCK_RESPONSE		0xb
+
+#define EXTCODE_MASK_SWAP		0x1
+#define EXTCODE_COMPARE_SWAP		0x2
+#define EXTCODE_FETCH_ADD		0x3
+#define EXTCODE_LITTLE_ADD		0x4
+#define EXTCODE_BOUNDED_ADD		0x5
+#define EXTCODE_WRAP_ADD		0x6
+#define EXTCODE_VENDOR_DEPENDENT	0x7
+
+/* Linux firewire-core (Juju) specific tcodes */
+#define TCODE_LOCK_MASK_SWAP		(0x10 | EXTCODE_MASK_SWAP)
+#define TCODE_LOCK_COMPARE_SWAP		(0x10 | EXTCODE_COMPARE_SWAP)
+#define TCODE_LOCK_FETCH_ADD		(0x10 | EXTCODE_FETCH_ADD)
+#define TCODE_LOCK_LITTLE_ADD		(0x10 | EXTCODE_LITTLE_ADD)
+#define TCODE_LOCK_BOUNDED_ADD		(0x10 | EXTCODE_BOUNDED_ADD)
+#define TCODE_LOCK_WRAP_ADD		(0x10 | EXTCODE_WRAP_ADD)
+#define TCODE_LOCK_VENDOR_DEPENDENT	(0x10 | EXTCODE_VENDOR_DEPENDENT)
+
+#define RCODE_COMPLETE			0x0
+#define RCODE_CONFLICT_ERROR		0x4
+#define RCODE_DATA_ERROR		0x5
+#define RCODE_TYPE_ERROR		0x6
+#define RCODE_ADDRESS_ERROR		0x7
+
+/* Linux firewire-core (Juju) specific rcodes */
+#define RCODE_SEND_ERROR		0x10
+#define RCODE_CANCELLED			0x11
+#define RCODE_BUSY			0x12
+#define RCODE_GENERATION		0x13
+#define RCODE_NO_ACK			0x14
+
+#define SCODE_100			0x0
+#define SCODE_200			0x1
+#define SCODE_400			0x2
+#define SCODE_800			0x3
+#define SCODE_1600			0x4
+#define SCODE_3200			0x5
+#define SCODE_BETA			0x3
+
+#define ACK_COMPLETE			0x1
+#define ACK_PENDING			0x2
+#define ACK_BUSY_X			0x4
+#define ACK_BUSY_A			0x5
+#define ACK_BUSY_B			0x6
+#define ACK_DATA_ERROR			0xd
+#define ACK_TYPE_ERROR			0xe
+
+#define RETRY_1				0x00
+#define RETRY_X				0x01
+#define RETRY_A				0x02
+#define RETRY_B				0x03
+
+#endif /* _LINUX_FIREWIRE_CONSTANTS_H */
diff --git a/include/linux/firewire.h b/include/linux/firewire.h
new file mode 100644
index 00000000..cdc9b719
--- /dev/null
+++ b/include/linux/firewire.h
@@ -0,0 +1,440 @@
+#ifndef _LINUX_FIREWIRE_H
+#define _LINUX_FIREWIRE_H
+
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/kref.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/sysfs.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include <linux/atomic.h>
+#include <asm/byteorder.h>
+
+#define CSR_REGISTER_BASE		0xfffff0000000ULL
+
+/* register offsets are relative to CSR_REGISTER_BASE */
+#define CSR_STATE_CLEAR			0x0
+#define CSR_STATE_SET			0x4
+#define CSR_NODE_IDS			0x8
+#define CSR_RESET_START			0xc
+#define CSR_SPLIT_TIMEOUT_HI		0x18
+#define CSR_SPLIT_TIMEOUT_LO		0x1c
+#define CSR_CYCLE_TIME			0x200
+#define CSR_BUS_TIME			0x204
+#define CSR_BUSY_TIMEOUT		0x210
+#define CSR_PRIORITY_BUDGET		0x218
+#define CSR_BUS_MANAGER_ID		0x21c
+#define CSR_BANDWIDTH_AVAILABLE		0x220
+#define CSR_CHANNELS_AVAILABLE		0x224
+#define CSR_CHANNELS_AVAILABLE_HI	0x224
+#define CSR_CHANNELS_AVAILABLE_LO	0x228
+#define CSR_MAINT_UTILITY		0x230
+#define CSR_BROADCAST_CHANNEL		0x234
+#define CSR_CONFIG_ROM			0x400
+#define CSR_CONFIG_ROM_END		0x800
+#define CSR_OMPR			0x900
+#define CSR_OPCR(i)			(0x904 + (i) * 4)
+#define CSR_IMPR			0x980
+#define CSR_IPCR(i)			(0x984 + (i) * 4)
+#define CSR_FCP_COMMAND			0xB00
+#define CSR_FCP_RESPONSE		0xD00
+#define CSR_FCP_END			0xF00
+#define CSR_TOPOLOGY_MAP		0x1000
+#define CSR_TOPOLOGY_MAP_END		0x1400
+#define CSR_SPEED_MAP			0x2000
+#define CSR_SPEED_MAP_END		0x3000
+
+#define CSR_OFFSET		0x40
+#define CSR_LEAF		0x80
+#define CSR_DIRECTORY		0xc0
+
+#define CSR_DESCRIPTOR		0x01
+#define CSR_VENDOR		0x03
+#define CSR_HARDWARE_VERSION	0x04
+#define CSR_UNIT		0x11
+#define CSR_SPECIFIER_ID	0x12
+#define CSR_VERSION		0x13
+#define CSR_DEPENDENT_INFO	0x14
+#define CSR_MODEL		0x17
+#define CSR_DIRECTORY_ID	0x20
+
+struct fw_csr_iterator {
+	const u32 *p;
+	const u32 *end;
+};
+
+void fw_csr_iterator_init(struct fw_csr_iterator *ci, const u32 *p);
+int fw_csr_iterator_next(struct fw_csr_iterator *ci, int *key, int *value);
+int fw_csr_string(const u32 *directory, int key, char *buf, size_t size);
+
+extern struct bus_type fw_bus_type;
+
+struct fw_card_driver;
+struct fw_node;
+
+struct fw_card {
+	const struct fw_card_driver *driver;
+	struct device *device;
+	struct kref kref;
+	struct completion done;
+
+	int node_id;
+	int generation;
+	int current_tlabel;
+	u64 tlabel_mask;
+	struct list_head transaction_list;
+	u64 reset_jiffies;
+
+	u32 split_timeout_hi;
+	u32 split_timeout_lo;
+	unsigned int split_timeout_cycles;
+	unsigned int split_timeout_jiffies;
+
+	unsigned long long guid;
+	unsigned max_receive;
+	int link_speed;
+	int config_rom_generation;
+
+	spinlock_t lock; /* Take this lock when handling the lists in
+			  * this struct. */
+	struct fw_node *local_node;
+	struct fw_node *root_node;
+	struct fw_node *irm_node;
+	u8 color; /* must be u8 to match the definition in struct fw_node */
+	int gap_count;
+	bool beta_repeaters_present;
+
+	int index;
+	struct list_head link;
+
+	struct list_head phy_receiver_list;
+
+	struct delayed_work br_work; /* bus reset job */
+	bool br_short;
+
+	struct delayed_work bm_work; /* bus manager job */
+	int bm_retries;
+	int bm_generation;
+	int bm_node_id;
+	bool bm_abdicate;
+
+	bool priority_budget_implemented;	/* controller feature */
+	bool broadcast_channel_auto_allocated;	/* controller feature */
+
+	bool broadcast_channel_allocated;
+	u32 broadcast_channel;
+	__be32 topology_map[(CSR_TOPOLOGY_MAP_END - CSR_TOPOLOGY_MAP) / 4];
+
+	__be32 maint_utility_register;
+};
+
+struct fw_attribute_group {
+	struct attribute_group *groups[2];
+	struct attribute_group group;
+	struct attribute *attrs[12];
+};
+
+enum fw_device_state {
+	FW_DEVICE_INITIALIZING,
+	FW_DEVICE_RUNNING,
+	FW_DEVICE_GONE,
+	FW_DEVICE_SHUTDOWN,
+};
+
+/*
+ * Note, fw_device.generation always has to be read before fw_device.node_id.
+ * Use SMP memory barriers to ensure this.  Otherwise requests will be sent
+ * to an outdated node_id if the generation was updated in the meantime due
+ * to a bus reset.
+ *
+ * Likewise, fw-core will take care to update .node_id before .generation so
+ * that whenever fw_device.generation is current WRT the actual bus generation,
+ * fw_device.node_id is guaranteed to be current too.
+ *
+ * The same applies to fw_device.card->node_id vs. fw_device.generation.
+ *
+ * fw_device.config_rom and fw_device.config_rom_length may be accessed during
+ * the lifetime of any fw_unit belonging to the fw_device, before device_del()
+ * was called on the last fw_unit.  Alternatively, they may be accessed while
+ * holding fw_device_rwsem.
+ */
+struct fw_device {
+	atomic_t state;
+	struct fw_node *node;
+	int node_id;
+	int generation;
+	unsigned max_speed;
+	struct fw_card *card;
+	struct device device;
+
+	struct mutex client_list_mutex;
+	struct list_head client_list;
+
+	const u32 *config_rom;
+	size_t config_rom_length;
+	int config_rom_retries;
+	unsigned is_local:1;
+	unsigned max_rec:4;
+	unsigned cmc:1;
+	unsigned irmc:1;
+	unsigned bc_implemented:2;
+
+	struct delayed_work work;
+	struct fw_attribute_group attribute_group;
+};
+
+static inline struct fw_device *fw_device(struct device *dev)
+{
+	return container_of(dev, struct fw_device, device);
+}
+
+static inline int fw_device_is_shutdown(struct fw_device *device)
+{
+	return atomic_read(&device->state) == FW_DEVICE_SHUTDOWN;
+}
+
+int fw_device_enable_phys_dma(struct fw_device *device);
+
+/*
+ * fw_unit.directory must not be accessed after device_del(&fw_unit.device).
+ */
+struct fw_unit {
+	struct device device;
+	const u32 *directory;
+	struct fw_attribute_group attribute_group;
+};
+
+static inline struct fw_unit *fw_unit(struct device *dev)
+{
+	return container_of(dev, struct fw_unit, device);
+}
+
+static inline struct fw_unit *fw_unit_get(struct fw_unit *unit)
+{
+	get_device(&unit->device);
+
+	return unit;
+}
+
+static inline void fw_unit_put(struct fw_unit *unit)
+{
+	put_device(&unit->device);
+}
+
+static inline struct fw_device *fw_parent_device(struct fw_unit *unit)
+{
+	return fw_device(unit->device.parent);
+}
+
+struct ieee1394_device_id;
+
+struct fw_driver {
+	struct device_driver driver;
+	/* Called when the parent device sits through a bus reset. */
+	void (*update)(struct fw_unit *unit);
+	const struct ieee1394_device_id *id_table;
+};
+
+struct fw_packet;
+struct fw_request;
+
+typedef void (*fw_packet_callback_t)(struct fw_packet *packet,
+				     struct fw_card *card, int status);
+typedef void (*fw_transaction_callback_t)(struct fw_card *card, int rcode,
+					  void *data, size_t length,
+					  void *callback_data);
+/*
+ * Important note:  Except for the FCP registers, the callback must guarantee
+ * that either fw_send_response() or kfree() is called on the @request.
+ */
+typedef void (*fw_address_callback_t)(struct fw_card *card,
+				      struct fw_request *request,
+				      int tcode, int destination, int source,
+				      int generation,
+				      unsigned long long offset,
+				      void *data, size_t length,
+				      void *callback_data);
+
+struct fw_packet {
+	int speed;
+	int generation;
+	u32 header[4];
+	size_t header_length;
+	void *payload;
+	size_t payload_length;
+	dma_addr_t payload_bus;
+	bool payload_mapped;
+	u32 timestamp;
+
+	/*
+	 * This callback is called when the packet transmission has completed.
+	 * For successful transmission, the status code is the ack received
+	 * from the destination.  Otherwise it is one of the juju-specific
+	 * rcodes:  RCODE_SEND_ERROR, _CANCELLED, _BUSY, _GENERATION, _NO_ACK.
+	 * The callback can be called from tasklet context and thus
+	 * must never block.
+	 */
+	fw_packet_callback_t callback;
+	int ack;
+	struct list_head link;
+	void *driver_data;
+};
+
+struct fw_transaction {
+	int node_id; /* The generation is implied; it is always the current. */
+	int tlabel;
+	struct list_head link;
+	struct fw_card *card;
+	bool is_split_transaction;
+	struct timer_list split_timeout_timer;
+
+	struct fw_packet packet;
+
+	/*
+	 * The data passed to the callback is valid only during the
+	 * callback.
+	 */
+	fw_transaction_callback_t callback;
+	void *callback_data;
+};
+
+struct fw_address_handler {
+	u64 offset;
+	size_t length;
+	fw_address_callback_t address_callback;
+	void *callback_data;
+	struct list_head link;
+};
+
+struct fw_address_region {
+	u64 start;
+	u64 end;
+};
+
+extern const struct fw_address_region fw_high_memory_region;
+
+int fw_core_add_address_handler(struct fw_address_handler *handler,
+				const struct fw_address_region *region);
+void fw_core_remove_address_handler(struct fw_address_handler *handler);
+void fw_send_response(struct fw_card *card,
+		      struct fw_request *request, int rcode);
+void fw_send_request(struct fw_card *card, struct fw_transaction *t,
+		     int tcode, int destination_id, int generation, int speed,
+		     unsigned long long offset, void *payload, size_t length,
+		     fw_transaction_callback_t callback, void *callback_data);
+int fw_cancel_transaction(struct fw_card *card,
+			  struct fw_transaction *transaction);
+int fw_run_transaction(struct fw_card *card, int tcode, int destination_id,
+		       int generation, int speed, unsigned long long offset,
+		       void *payload, size_t length);
+
+static inline int fw_stream_packet_destination_id(int tag, int channel, int sy)
+{
+	return tag << 14 | channel << 8 | sy;
+}
+
+struct fw_descriptor {
+	struct list_head link;
+	size_t length;
+	u32 immediate;
+	u32 key;
+	const u32 *data;
+};
+
+int fw_core_add_descriptor(struct fw_descriptor *desc);
+void fw_core_remove_descriptor(struct fw_descriptor *desc);
+
+/*
+ * The iso packet format allows for an immediate header/payload part
+ * stored in 'header' immediately after the packet info plus an
+ * indirect payload part that is pointer to by the 'payload' field.
+ * Applications can use one or the other or both to implement simple
+ * low-bandwidth streaming (e.g. audio) or more advanced
+ * scatter-gather streaming (e.g. assembling video frame automatically).
+ */
+struct fw_iso_packet {
+	u16 payload_length;	/* Length of indirect payload		*/
+	u32 interrupt:1;	/* Generate interrupt on this packet	*/
+	u32 skip:1;		/* tx: Set to not send packet at all	*/
+				/* rx: Sync bit, wait for matching sy	*/
+	u32 tag:2;		/* tx: Tag in packet header		*/
+	u32 sy:4;		/* tx: Sy in packet header		*/
+	u32 header_length:8;	/* Length of immediate header		*/
+	u32 header[0];		/* tx: Top of 1394 isoch. data_block	*/
+};
+
+#define FW_ISO_CONTEXT_TRANSMIT			0
+#define FW_ISO_CONTEXT_RECEIVE			1
+#define FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL	2
+
+#define FW_ISO_CONTEXT_MATCH_TAG0	 1
+#define FW_ISO_CONTEXT_MATCH_TAG1	 2
+#define FW_ISO_CONTEXT_MATCH_TAG2	 4
+#define FW_ISO_CONTEXT_MATCH_TAG3	 8
+#define FW_ISO_CONTEXT_MATCH_ALL_TAGS	15
+
+/*
+ * An iso buffer is just a set of pages mapped for DMA in the
+ * specified direction.  Since the pages are to be used for DMA, they
+ * are not mapped into the kernel virtual address space.  We store the
+ * DMA address in the page private. The helper function
+ * fw_iso_buffer_map() will map the pages into a given vma.
+ */
+struct fw_iso_buffer {
+	enum dma_data_direction direction;
+	struct page **pages;
+	int page_count;
+};
+
+int fw_iso_buffer_init(struct fw_iso_buffer *buffer, struct fw_card *card,
+		       int page_count, enum dma_data_direction direction);
+void fw_iso_buffer_destroy(struct fw_iso_buffer *buffer, struct fw_card *card);
+size_t fw_iso_buffer_lookup(struct fw_iso_buffer *buffer, dma_addr_t completed);
+
+struct fw_iso_context;
+typedef void (*fw_iso_callback_t)(struct fw_iso_context *context,
+				  u32 cycle, size_t header_length,
+				  void *header, void *data);
+typedef void (*fw_iso_mc_callback_t)(struct fw_iso_context *context,
+				     dma_addr_t completed, void *data);
+struct fw_iso_context {
+	struct fw_card *card;
+	int type;
+	int channel;
+	int speed;
+	size_t header_size;
+	union {
+		fw_iso_callback_t sc;
+		fw_iso_mc_callback_t mc;
+	} callback;
+	void *callback_data;
+};
+
+struct fw_iso_context *fw_iso_context_create(struct fw_card *card,
+		int type, int channel, int speed, size_t header_size,
+		fw_iso_callback_t callback, void *callback_data);
+int fw_iso_context_set_channels(struct fw_iso_context *ctx, u64 *channels);
+int fw_iso_context_queue(struct fw_iso_context *ctx,
+			 struct fw_iso_packet *packet,
+			 struct fw_iso_buffer *buffer,
+			 unsigned long payload);
+void fw_iso_context_queue_flush(struct fw_iso_context *ctx);
+int fw_iso_context_flush_completions(struct fw_iso_context *ctx);
+int fw_iso_context_start(struct fw_iso_context *ctx,
+			 int cycle, int sync, int tags);
+int fw_iso_context_stop(struct fw_iso_context *ctx);
+void fw_iso_context_destroy(struct fw_iso_context *ctx);
+void fw_iso_resource_manage(struct fw_card *card, int generation,
+			    u64 channels_mask, int *channel, int *bandwidth,
+			    bool allocate);
+
+extern struct workqueue_struct *fw_workqueue;
+
+#endif /* _LINUX_FIREWIRE_H */
diff --git a/include/linux/firmware-map.h b/include/linux/firmware-map.h
new file mode 100644
index 00000000..43fe52fc
--- /dev/null
+++ b/include/linux/firmware-map.h
@@ -0,0 +1,43 @@
+/*
+ * include/linux/firmware-map.h:
+ *  Copyright (C) 2008 SUSE LINUX Products GmbH
+ *  by Bernhard Walle <bernhard.walle@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef _LINUX_FIRMWARE_MAP_H
+#define _LINUX_FIRMWARE_MAP_H
+
+#include <linux/list.h>
+
+/*
+ * provide a dummy interface if CONFIG_FIRMWARE_MEMMAP is disabled
+ */
+#ifdef CONFIG_FIRMWARE_MEMMAP
+
+int firmware_map_add_early(u64 start, u64 end, const char *type);
+int firmware_map_add_hotplug(u64 start, u64 end, const char *type);
+
+#else /* CONFIG_FIRMWARE_MEMMAP */
+
+static inline int firmware_map_add_early(u64 start, u64 end, const char *type)
+{
+	return 0;
+}
+
+static inline int firmware_map_add_hotplug(u64 start, u64 end, const char *type)
+{
+	return 0;
+}
+
+#endif /* CONFIG_FIRMWARE_MEMMAP */
+
+#endif /* _LINUX_FIRMWARE_MAP_H */
diff --git a/include/linux/firmware.h b/include/linux/firmware.h
new file mode 100644
index 00000000..1e7c0118
--- /dev/null
+++ b/include/linux/firmware.h
@@ -0,0 +1,67 @@
+#ifndef _LINUX_FIRMWARE_H
+#define _LINUX_FIRMWARE_H
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/gfp.h>
+
+#define FW_ACTION_NOHOTPLUG 0
+#define FW_ACTION_HOTPLUG 1
+
+struct firmware {
+	size_t size;
+	const u8 *data;
+	struct page **pages;
+};
+
+struct module;
+struct device;
+
+struct builtin_fw {
+	char *name;
+	void *data;
+	unsigned long size;
+};
+
+/* We have to play tricks here much like stringify() to get the
+   __COUNTER__ macro to be expanded as we want it */
+#define __fw_concat1(x, y) x##y
+#define __fw_concat(x, y) __fw_concat1(x, y)
+
+#define DECLARE_BUILTIN_FIRMWARE(name, blob)				     \
+	DECLARE_BUILTIN_FIRMWARE_SIZE(name, &(blob), sizeof(blob))
+
+#define DECLARE_BUILTIN_FIRMWARE_SIZE(name, blob, size)			     \
+	static const struct builtin_fw __fw_concat(__builtin_fw,__COUNTER__) \
+	__used __section(.builtin_fw) = { name, blob, size }
+
+#if defined(CONFIG_FW_LOADER) || (defined(CONFIG_FW_LOADER_MODULE) && defined(MODULE))
+int request_firmware(const struct firmware **fw, const char *name,
+		     struct device *device);
+int request_firmware_nowait(
+	struct module *module, bool uevent,
+	const char *name, struct device *device, gfp_t gfp, void *context,
+	void (*cont)(const struct firmware *fw, void *context));
+
+void release_firmware(const struct firmware *fw);
+#else
+static inline int request_firmware(const struct firmware **fw,
+				   const char *name,
+				   struct device *device)
+{
+	return -EINVAL;
+}
+static inline int request_firmware_nowait(
+	struct module *module, bool uevent,
+	const char *name, struct device *device, gfp_t gfp, void *context,
+	void (*cont)(const struct firmware *fw, void *context))
+{
+	return -EINVAL;
+}
+
+static inline void release_firmware(const struct firmware *fw)
+{
+}
+#endif
+
+#endif
diff --git a/include/linux/flat.h b/include/linux/flat.h
new file mode 100644
index 00000000..ec56852e
--- /dev/null
+++ b/include/linux/flat.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright (C) 2002-2003  David McCullough <davidm@snapgear.com>
+ * Copyright (C) 1998       Kenneth Albanowski <kjahds@kjahds.com>
+ *                          The Silver Hammer Group, Ltd.
+ *
+ * This file provides the definitions and structures needed to
+ * support uClinux flat-format executables.
+ */
+
+#ifndef _LINUX_FLAT_H
+#define _LINUX_FLAT_H
+
+#ifdef __KERNEL__
+#include <asm/flat.h>
+#endif
+
+#define	FLAT_VERSION			0x00000004L
+
+#ifdef CONFIG_BINFMT_SHARED_FLAT
+#define	MAX_SHARED_LIBS			(4)
+#else
+#define	MAX_SHARED_LIBS			(1)
+#endif
+
+/*
+ * To make everything easier to port and manage cross platform
+ * development,  all fields are in network byte order.
+ */
+
+struct flat_hdr {
+	char magic[4];
+	unsigned long rev;          /* version (as above) */
+	unsigned long entry;        /* Offset of first executable instruction
+	                               with text segment from beginning of file */
+	unsigned long data_start;   /* Offset of data segment from beginning of
+	                               file */
+	unsigned long data_end;     /* Offset of end of data segment
+	                               from beginning of file */
+	unsigned long bss_end;      /* Offset of end of bss segment from beginning
+	                               of file */
+
+	/* (It is assumed that data_end through bss_end forms the bss segment.) */
+
+	unsigned long stack_size;   /* Size of stack, in bytes */
+	unsigned long reloc_start;  /* Offset of relocation records from
+	                               beginning of file */
+	unsigned long reloc_count;  /* Number of relocation records */
+	unsigned long flags;       
+	unsigned long build_date;   /* When the program/library was built */
+	unsigned long filler[5];    /* Reservered, set to zero */
+};
+
+#define FLAT_FLAG_RAM    0x0001 /* load program entirely into RAM */
+#define FLAT_FLAG_GOTPIC 0x0002 /* program is PIC with GOT */
+#define FLAT_FLAG_GZIP   0x0004 /* all but the header is compressed */
+#define FLAT_FLAG_GZDATA 0x0008 /* only data/relocs are compressed (for XIP) */
+#define FLAT_FLAG_KTRACE 0x0010 /* output useful kernel trace for debugging */
+
+
+#ifdef __KERNEL__ /* so systems without linux headers can compile the apps */
+/*
+ * While it would be nice to keep this header clean,  users of older
+ * tools still need this support in the kernel.  So this section is
+ * purely for compatibility with old tool chains.
+ *
+ * DO NOT make changes or enhancements to the old format please,  just work
+ *        with the format above,  except to fix bugs with old format support.
+ */
+
+#include <asm/byteorder.h>
+
+#define	OLD_FLAT_VERSION			0x00000002L
+#define OLD_FLAT_RELOC_TYPE_TEXT	0
+#define OLD_FLAT_RELOC_TYPE_DATA	1
+#define OLD_FLAT_RELOC_TYPE_BSS		2
+
+typedef union {
+	unsigned long	value;
+	struct {
+# if defined(mc68000) && !defined(CONFIG_COLDFIRE)
+		signed long offset : 30;
+		unsigned long type : 2;
+#   	define OLD_FLAT_FLAG_RAM    0x1 /* load program entirely into RAM */
+# elif defined(__BIG_ENDIAN_BITFIELD)
+		unsigned long type : 2;
+		signed long offset : 30;
+#   	define OLD_FLAT_FLAG_RAM    0x1 /* load program entirely into RAM */
+# elif defined(__LITTLE_ENDIAN_BITFIELD)
+		signed long offset : 30;
+		unsigned long type : 2;
+#   	define OLD_FLAT_FLAG_RAM    0x1 /* load program entirely into RAM */
+# else
+#   	error "Unknown bitfield order for flat files."
+# endif
+	} reloc;
+} flat_v2_reloc_t;
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_FLAT_H */
diff --git a/include/linux/flex_array.h b/include/linux/flex_array.h
new file mode 100644
index 00000000..6843cf19
--- /dev/null
+++ b/include/linux/flex_array.h
@@ -0,0 +1,80 @@
+#ifndef _FLEX_ARRAY_H
+#define _FLEX_ARRAY_H
+
+#include <linux/types.h>
+#include <asm/page.h>
+
+#define FLEX_ARRAY_PART_SIZE PAGE_SIZE
+#define FLEX_ARRAY_BASE_SIZE PAGE_SIZE
+
+struct flex_array_part;
+
+/*
+ * This is meant to replace cases where an array-like
+ * structure has gotten too big to fit into kmalloc()
+ * and the developer is getting tempted to use
+ * vmalloc().
+ */
+
+struct flex_array {
+	union {
+		struct {
+			int element_size;
+			int total_nr_elements;
+			int elems_per_part;
+			u32 reciprocal_elems;
+			struct flex_array_part *parts[];
+		};
+		/*
+		 * This little trick makes sure that
+		 * sizeof(flex_array) == PAGE_SIZE
+		 */
+		char padding[FLEX_ARRAY_BASE_SIZE];
+	};
+};
+
+/* Number of bytes left in base struct flex_array, excluding metadata */
+#define FLEX_ARRAY_BASE_BYTES_LEFT					\
+	(FLEX_ARRAY_BASE_SIZE - offsetof(struct flex_array, parts))
+
+/* Number of pointers in base to struct flex_array_part pages */
+#define FLEX_ARRAY_NR_BASE_PTRS						\
+	(FLEX_ARRAY_BASE_BYTES_LEFT / sizeof(struct flex_array_part *))
+
+/* Number of elements of size that fit in struct flex_array_part */
+#define FLEX_ARRAY_ELEMENTS_PER_PART(size)				\
+	(FLEX_ARRAY_PART_SIZE / size)
+
+/*
+ * Defines a statically allocated flex array and ensures its parameters are
+ * valid.
+ */
+#define DEFINE_FLEX_ARRAY(__arrayname, __element_size, __total)		\
+	struct flex_array __arrayname = { { {				\
+		.element_size = (__element_size),			\
+		.total_nr_elements = (__total),				\
+	} } };								\
+	static inline void __arrayname##_invalid_parameter(void)	\
+	{								\
+		BUILD_BUG_ON((__total) > FLEX_ARRAY_NR_BASE_PTRS *	\
+			FLEX_ARRAY_ELEMENTS_PER_PART(__element_size));	\
+	}
+
+struct flex_array *flex_array_alloc(int element_size, unsigned int total,
+		gfp_t flags);
+int flex_array_prealloc(struct flex_array *fa, unsigned int start,
+		unsigned int nr_elements, gfp_t flags);
+void flex_array_free(struct flex_array *fa);
+void flex_array_free_parts(struct flex_array *fa);
+int flex_array_put(struct flex_array *fa, unsigned int element_nr, void *src,
+		gfp_t flags);
+int flex_array_clear(struct flex_array *fa, unsigned int element_nr);
+void *flex_array_get(struct flex_array *fa, unsigned int element_nr);
+int flex_array_shrink(struct flex_array *fa);
+
+#define flex_array_put_ptr(fa, nr, src, gfp) \
+	flex_array_put(fa, nr, (void *)&(src), gfp)
+
+void *flex_array_get_ptr(struct flex_array *fa, unsigned int element_nr);
+
+#endif /* _FLEX_ARRAY_H */
diff --git a/include/linux/font.h b/include/linux/font.h
new file mode 100644
index 00000000..40a24ab4
--- /dev/null
+++ b/include/linux/font.h
@@ -0,0 +1,58 @@
+/*
+ *  font.h -- `Soft' font definitions
+ *
+ *  Created 1995 by Geert Uytterhoeven
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License.  See the file COPYING in the main directory of this archive
+ *  for more details.
+ */
+
+#ifndef _VIDEO_FONT_H
+#define _VIDEO_FONT_H
+
+#include <linux/types.h>
+
+struct font_desc {
+    int idx;
+    const char *name;
+    int width, height;
+    const void *data;
+    int pref;
+};
+
+#define VGA8x8_IDX	0
+#define VGA8x16_IDX	1
+#define PEARL8x8_IDX	2
+#define VGA6x11_IDX	3
+#define FONT7x14_IDX	4
+#define	FONT10x18_IDX	5
+#define SUN8x16_IDX	6
+#define SUN12x22_IDX	7
+#define ACORN8x8_IDX	8
+#define	MINI4x6_IDX	9
+
+extern const struct font_desc	font_vga_8x8,
+			font_vga_8x16,
+			font_pearl_8x8,
+			font_vga_6x11,
+			font_7x14,
+			font_10x18,
+			font_sun_8x16,
+			font_sun_12x22,
+			font_acorn_8x8,
+			font_mini_4x6;
+
+/* Find a font with a specific name */
+
+extern const struct font_desc *find_font(const char *name);
+
+/* Get the default font for a specific screen size */
+
+extern const struct font_desc *get_default_font(int xres, int yres,
+						u32 font_w, u32 font_h);
+
+/* Max. length for the name of a predefined font */
+#define MAX_FONT_NAME	32
+
+#endif /* _VIDEO_FONT_H */
diff --git a/include/linux/freezer.h b/include/linux/freezer.h
new file mode 100644
index 00000000..a628084e
--- /dev/null
+++ b/include/linux/freezer.h
@@ -0,0 +1,214 @@
+/* Freezer declarations */
+
+#ifndef FREEZER_H_INCLUDED
+#define FREEZER_H_INCLUDED
+
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/atomic.h>
+
+#ifdef CONFIG_FREEZER
+extern atomic_t system_freezing_cnt;	/* nr of freezing conds in effect */
+extern bool pm_freezing;		/* PM freezing in effect */
+extern bool pm_nosig_freezing;		/* PM nosig freezing in effect */
+
+/*
+ * Check if a process has been frozen
+ */
+static inline bool frozen(struct task_struct *p)
+{
+	return p->flags & PF_FROZEN;
+}
+
+extern bool freezing_slow_path(struct task_struct *p);
+
+/*
+ * Check if there is a request to freeze a process
+ */
+static inline bool freezing(struct task_struct *p)
+{
+	if (likely(!atomic_read(&system_freezing_cnt)))
+		return false;
+	return freezing_slow_path(p);
+}
+
+/* Takes and releases task alloc lock using task_lock() */
+extern void __thaw_task(struct task_struct *t);
+
+extern bool __refrigerator(bool check_kthr_stop);
+extern int freeze_processes(void);
+extern int freeze_kernel_threads(void);
+extern void thaw_processes(void);
+extern void thaw_kernel_threads(void);
+
+/*
+ * HACK: prevent sleeping while atomic warnings due to ARM signal handling
+ * disabling irqs
+ */
+static inline bool try_to_freeze_nowarn(void)
+{
+	if (likely(!freezing(current)))
+		return false;
+	return __refrigerator(false);
+}
+
+static inline bool try_to_freeze(void)
+{
+	might_sleep();
+	if (likely(!freezing(current)))
+		return false;
+	return __refrigerator(false);
+}
+
+extern bool freeze_task(struct task_struct *p);
+extern bool set_freezable(void);
+
+#ifdef CONFIG_CGROUP_FREEZER
+extern bool cgroup_freezing(struct task_struct *task);
+#else /* !CONFIG_CGROUP_FREEZER */
+static inline bool cgroup_freezing(struct task_struct *task)
+{
+	return false;
+}
+#endif /* !CONFIG_CGROUP_FREEZER */
+
+/*
+ * The PF_FREEZER_SKIP flag should be set by a vfork parent right before it
+ * calls wait_for_completion(&vfork) and reset right after it returns from this
+ * function.  Next, the parent should call try_to_freeze() to freeze itself
+ * appropriately in case the child has exited before the freezing of tasks is
+ * complete.  However, we don't want kernel threads to be frozen in unexpected
+ * places, so we allow them to block freeze_processes() instead or to set
+ * PF_NOFREEZE if needed. Fortunately, in the ____call_usermodehelper() case the
+ * parent won't really block freeze_processes(), since ____call_usermodehelper()
+ * (the child) does a little before exec/exit and it can't be frozen before
+ * waking up the parent.
+ */
+
+
+/* Tell the freezer not to count the current task as freezable. */
+static inline void freezer_do_not_count(void)
+{
+	current->flags |= PF_FREEZER_SKIP;
+}
+
+/*
+ * Tell the freezer to count the current task as freezable again and try to
+ * freeze it.
+ */
+static inline void freezer_count(void)
+{
+	current->flags &= ~PF_FREEZER_SKIP;
+	try_to_freeze();
+}
+
+/*
+ * Check if the task should be counted as freezable by the freezer
+ */
+static inline int freezer_should_skip(struct task_struct *p)
+{
+	return !!(p->flags & PF_FREEZER_SKIP);
+}
+
+/*
+ * These macros are intended to be used whenever you want allow a task that's
+ * sleeping in TASK_UNINTERRUPTIBLE or TASK_KILLABLE state to be frozen. Note
+ * that neither return any clear indication of whether a freeze event happened
+ * while in this function.
+ */
+
+/* Like schedule(), but should not block the freezer. */
+#define freezable_schedule()						\
+({									\
+	freezer_do_not_count();						\
+	schedule();							\
+	freezer_count();						\
+})
+
+/* Like schedule_timeout_killable(), but should not block the freezer. */
+#define freezable_schedule_timeout_killable(timeout)			\
+({									\
+	long __retval;							\
+	freezer_do_not_count();						\
+	__retval = schedule_timeout_killable(timeout);			\
+	freezer_count();						\
+	__retval;							\
+})
+
+/*
+ * Freezer-friendly wrappers around wait_event_interruptible(),
+ * wait_event_killable() and wait_event_interruptible_timeout(), originally
+ * defined in <linux/wait.h>
+ */
+
+#define wait_event_freezekillable(wq, condition)			\
+({									\
+	int __retval;							\
+	freezer_do_not_count();						\
+	__retval = wait_event_killable(wq, (condition));		\
+	freezer_count();						\
+	__retval;							\
+})
+
+#define wait_event_freezable(wq, condition)				\
+({									\
+	int __retval;							\
+	for (;;) {							\
+		__retval = wait_event_interruptible(wq, 		\
+				(condition) || freezing(current));	\
+		if (__retval || (condition))				\
+			break;						\
+		try_to_freeze();					\
+	}								\
+	__retval;							\
+})
+
+#define wait_event_freezable_timeout(wq, condition, timeout)		\
+({									\
+	long __retval = timeout;					\
+	for (;;) {							\
+		__retval = wait_event_interruptible_timeout(wq,		\
+				(condition) || freezing(current),	\
+				__retval); 				\
+		if (__retval <= 0 || (condition))			\
+			break;						\
+		try_to_freeze();					\
+	}								\
+	__retval;							\
+})
+
+#else /* !CONFIG_FREEZER */
+static inline bool frozen(struct task_struct *p) { return false; }
+static inline bool freezing(struct task_struct *p) { return false; }
+static inline void __thaw_task(struct task_struct *t) {}
+
+static inline bool __refrigerator(bool check_kthr_stop) { return false; }
+static inline int freeze_processes(void) { return -ENOSYS; }
+static inline int freeze_kernel_threads(void) { return -ENOSYS; }
+static inline void thaw_processes(void) {}
+static inline void thaw_kernel_threads(void) {}
+
+static inline bool try_to_freeze(void) { return false; }
+
+static inline void freezer_do_not_count(void) {}
+static inline void freezer_count(void) {}
+static inline int freezer_should_skip(struct task_struct *p) { return 0; }
+static inline void set_freezable(void) {}
+
+#define freezable_schedule()  schedule()
+
+#define freezable_schedule_timeout_killable(timeout)			\
+	schedule_timeout_killable(timeout)
+
+#define wait_event_freezable(wq, condition)				\
+		wait_event_interruptible(wq, condition)
+
+#define wait_event_freezable_timeout(wq, condition, timeout)		\
+		wait_event_interruptible_timeout(wq, condition, timeout)
+
+#define wait_event_freezekillable(wq, condition)		\
+		wait_event_killable(wq, condition)
+
+#endif /* !CONFIG_FREEZER */
+
+#endif	/* FREEZER_H_INCLUDED */
diff --git a/include/linux/fs.h b/include/linux/fs.h
new file mode 100644
index 00000000..25c40b9f
--- /dev/null
+++ b/include/linux/fs.h
@@ -0,0 +1,2676 @@
+#ifndef _LINUX_FS_H
+#define _LINUX_FS_H
+
+/*
+ * This file has definitions for some important file table
+ * structures etc.
+ */
+
+#include <linux/limits.h>
+#include <linux/ioctl.h>
+#include <linux/blk_types.h>
+#include <linux/types.h>
+
+/*
+ * It's silly to have NR_OPEN bigger than NR_FILE, but you can change
+ * the file limit at runtime and only root can increase the per-process
+ * nr_file rlimit, so it's safe to set up a ridiculously high absolute
+ * upper limit on files-per-process.
+ *
+ * Some programs (notably those using select()) may have to be 
+ * recompiled to take full advantage of the new limits..  
+ */
+
+/* Fixed constants first: */
+#undef NR_OPEN
+#define INR_OPEN_CUR 1024	/* Initial setting for nfile rlimits */
+#define INR_OPEN_MAX 4096	/* Hard limit for nfile rlimits */
+
+#define BLOCK_SIZE_BITS 10
+#define BLOCK_SIZE (1<<BLOCK_SIZE_BITS)
+
+#define SEEK_SET	0	/* seek relative to beginning of file */
+#define SEEK_CUR	1	/* seek relative to current file position */
+#define SEEK_END	2	/* seek relative to end of file */
+#define SEEK_DATA	3	/* seek to the next data */
+#define SEEK_HOLE	4	/* seek to the next hole */
+#define SEEK_MAX	SEEK_HOLE
+
+struct fstrim_range {
+	__u64 start;
+	__u64 len;
+	__u64 minlen;
+};
+
+/* And dynamically-tunable limits and defaults: */
+struct files_stat_struct {
+	unsigned long nr_files;		/* read only */
+	unsigned long nr_free_files;	/* read only */
+	unsigned long max_files;		/* tunable */
+};
+
+struct inodes_stat_t {
+	int nr_inodes;
+	int nr_unused;
+	int dummy[5];		/* padding for sysctl ABI compatibility */
+};
+
+
+#define NR_FILE  8192	/* this can well be larger on a larger system */
+
+#define MAY_EXEC		0x00000001
+#define MAY_WRITE		0x00000002
+#define MAY_READ		0x00000004
+#define MAY_APPEND		0x00000008
+#define MAY_ACCESS		0x00000010
+#define MAY_OPEN		0x00000020
+#define MAY_CHDIR		0x00000040
+/* called from RCU mode, don't block */
+#define MAY_NOT_BLOCK		0x00000080
+
+/*
+ * flags in file.f_mode.  Note that FMODE_READ and FMODE_WRITE must correspond
+ * to O_WRONLY and O_RDWR via the strange trick in __dentry_open()
+ */
+
+/* file is open for reading */
+#define FMODE_READ		((__force fmode_t)0x1)
+/* file is open for writing */
+#define FMODE_WRITE		((__force fmode_t)0x2)
+/* file is seekable */
+#define FMODE_LSEEK		((__force fmode_t)0x4)
+/* file can be accessed using pread */
+#define FMODE_PREAD		((__force fmode_t)0x8)
+/* file can be accessed using pwrite */
+#define FMODE_PWRITE		((__force fmode_t)0x10)
+/* File is opened for execution with sys_execve / sys_uselib */
+#define FMODE_EXEC		((__force fmode_t)0x20)
+/* File is opened with O_NDELAY (only set for block devices) */
+#define FMODE_NDELAY		((__force fmode_t)0x40)
+/* File is opened with O_EXCL (only set for block devices) */
+#define FMODE_EXCL		((__force fmode_t)0x80)
+/* File is opened using open(.., 3, ..) and is writeable only for ioctls
+   (specialy hack for floppy.c) */
+#define FMODE_WRITE_IOCTL	((__force fmode_t)0x100)
+/* 32bit hashes as llseek() offset (for directories) */
+#define FMODE_32BITHASH         ((__force fmode_t)0x200)
+/* 64bit hashes as llseek() offset (for directories) */
+#define FMODE_64BITHASH         ((__force fmode_t)0x400)
+
+/*
+ * Don't update ctime and mtime.
+ *
+ * Currently a special hack for the XFS open_by_handle ioctl, but we'll
+ * hopefully graduate it to a proper O_CMTIME flag supported by open(2) soon.
+ */
+#define FMODE_NOCMTIME		((__force fmode_t)0x800)
+
+/* Expect random access pattern */
+#define FMODE_RANDOM		((__force fmode_t)0x1000)
+
+/* File is huge (eg. /dev/kmem): treat loff_t as unsigned */
+#define FMODE_UNSIGNED_OFFSET	((__force fmode_t)0x2000)
+
+/* File is opened with O_PATH; almost nothing can be done with it */
+#define FMODE_PATH		((__force fmode_t)0x4000)
+
+/* File was opened by fanotify and shouldn't generate fanotify events */
+#define FMODE_NONOTIFY		((__force fmode_t)0x1000000)
+
+/*
+ * The below are the various read and write types that we support. Some of
+ * them include behavioral modifiers that send information down to the
+ * block layer and IO scheduler. Terminology:
+ *
+ *	The block layer uses device plugging to defer IO a little bit, in
+ *	the hope that we will see more IO very shortly. This increases
+ *	coalescing of adjacent IO and thus reduces the number of IOs we
+ *	have to send to the device. It also allows for better queuing,
+ *	if the IO isn't mergeable. If the caller is going to be waiting
+ *	for the IO, then he must ensure that the device is unplugged so
+ *	that the IO is dispatched to the driver.
+ *
+ *	All IO is handled async in Linux. This is fine for background
+ *	writes, but for reads or writes that someone waits for completion
+ *	on, we want to notify the block layer and IO scheduler so that they
+ *	know about it. That allows them to make better scheduling
+ *	decisions. So when the below references 'sync' and 'async', it
+ *	is referencing this priority hint.
+ *
+ * With that in mind, the available types are:
+ *
+ * READ			A normal read operation. Device will be plugged.
+ * READ_SYNC		A synchronous read. Device is not plugged, caller can
+ *			immediately wait on this read without caring about
+ *			unplugging.
+ * READA		Used for read-ahead operations. Lower priority, and the
+ *			block layer could (in theory) choose to ignore this
+ *			request if it runs into resource problems.
+ * WRITE		A normal async write. Device will be plugged.
+ * WRITE_SYNC		Synchronous write. Identical to WRITE, but passes down
+ *			the hint that someone will be waiting on this IO
+ *			shortly. The write equivalent of READ_SYNC.
+ * WRITE_ODIRECT	Special case write for O_DIRECT only.
+ * WRITE_FLUSH		Like WRITE_SYNC but with preceding cache flush.
+ * WRITE_FUA		Like WRITE_SYNC but data is guaranteed to be on
+ *			non-volatile media on completion.
+ * WRITE_FLUSH_FUA	Combination of WRITE_FLUSH and FUA. The IO is preceded
+ *			by a cache flush and data is guaranteed to be on
+ *			non-volatile media on completion.
+ *
+ */
+#define RW_MASK			REQ_WRITE
+#define RWA_MASK		REQ_RAHEAD
+
+#define READ			0
+#define WRITE			RW_MASK
+#define READA			RWA_MASK
+
+#define READ_SYNC		(READ | REQ_SYNC)
+#define WRITE_SYNC		(WRITE | REQ_SYNC | REQ_NOIDLE)
+#define WRITE_ODIRECT		(WRITE | REQ_SYNC)
+#define WRITE_FLUSH		(WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH)
+#define WRITE_FUA		(WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FUA)
+#define WRITE_FLUSH_FUA		(WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH | REQ_FUA)
+
+#define SEL_IN		1
+#define SEL_OUT		2
+#define SEL_EX		4
+
+/* public flags for file_system_type */
+#define FS_REQUIRES_DEV 1 
+#define FS_BINARY_MOUNTDATA 2
+#define FS_HAS_SUBTYPE 4
+#define FS_REVAL_DOT	16384	/* Check the paths ".", ".." for staleness */
+#define FS_RENAME_DOES_D_MOVE	32768	/* FS will handle d_move()
+					 * during rename() internally.
+					 */
+
+/*
+ * These are the fs-independent mount-flags: up to 32 flags are supported
+ */
+#define MS_RDONLY	 1	/* Mount read-only */
+#define MS_NOSUID	 2	/* Ignore suid and sgid bits */
+#define MS_NODEV	 4	/* Disallow access to device special files */
+#define MS_NOEXEC	 8	/* Disallow program execution */
+#define MS_SYNCHRONOUS	16	/* Writes are synced at once */
+#define MS_REMOUNT	32	/* Alter flags of a mounted FS */
+#define MS_MANDLOCK	64	/* Allow mandatory locks on an FS */
+#define MS_DIRSYNC	128	/* Directory modifications are synchronous */
+#define MS_NOATIME	1024	/* Do not update access times. */
+#define MS_NODIRATIME	2048	/* Do not update directory access times */
+#define MS_BIND		4096
+#define MS_MOVE		8192
+#define MS_REC		16384
+#define MS_VERBOSE	32768	/* War is peace. Verbosity is silence.
+				   MS_VERBOSE is deprecated. */
+#define MS_SILENT	32768
+#define MS_POSIXACL	(1<<16)	/* VFS does not apply the umask */
+#define MS_UNBINDABLE	(1<<17)	/* change to unbindable */
+#define MS_PRIVATE	(1<<18)	/* change to private */
+#define MS_SLAVE	(1<<19)	/* change to slave */
+#define MS_SHARED	(1<<20)	/* change to shared */
+#define MS_RELATIME	(1<<21)	/* Update atime relative to mtime/ctime. */
+#define MS_KERNMOUNT	(1<<22) /* this is a kern_mount call */
+#define MS_I_VERSION	(1<<23) /* Update inode I_version field */
+#define MS_STRICTATIME	(1<<24) /* Always perform atime updates */
+#define MS_NOSEC	(1<<28)
+#define MS_BORN		(1<<29)
+#define MS_ACTIVE	(1<<30)
+#define MS_NOUSER	(1<<31)
+
+/*
+ * Superblock flags that can be altered by MS_REMOUNT
+ */
+#define MS_RMT_MASK	(MS_RDONLY|MS_SYNCHRONOUS|MS_MANDLOCK|MS_I_VERSION)
+
+/*
+ * Old magic mount flag and mask
+ */
+#define MS_MGC_VAL 0xC0ED0000
+#define MS_MGC_MSK 0xffff0000
+
+/* Inode flags - they have nothing to superblock flags now */
+
+#define S_SYNC		1	/* Writes are synced at once */
+#define S_NOATIME	2	/* Do not update access times */
+#define S_APPEND	4	/* Append-only file */
+#define S_IMMUTABLE	8	/* Immutable file */
+#define S_DEAD		16	/* removed, but still open directory */
+#define S_NOQUOTA	32	/* Inode is not counted to quota */
+#define S_DIRSYNC	64	/* Directory modifications are synchronous */
+#define S_NOCMTIME	128	/* Do not update file c/mtime */
+#define S_SWAPFILE	256	/* Do not truncate: swapon got its bmaps */
+#define S_PRIVATE	512	/* Inode is fs-internal */
+#define S_IMA		1024	/* Inode has an associated IMA struct */
+#define S_AUTOMOUNT	2048	/* Automount/referral quasi-directory */
+#define S_NOSEC		4096	/* no suid or xattr security attributes */
+
+/*
+ * Note that nosuid etc flags are inode-specific: setting some file-system
+ * flags just means all the inodes inherit those flags by default. It might be
+ * possible to override it selectively if you really wanted to with some
+ * ioctl() that is not currently implemented.
+ *
+ * Exception: MS_RDONLY is always applied to the entire file system.
+ *
+ * Unfortunately, it is possible to change a filesystems flags with it mounted
+ * with files in use.  This means that all of the inodes will not have their
+ * i_flags updated.  Hence, i_flags no longer inherit the superblock mount
+ * flags, so these have to be checked separately. -- rmk@arm.uk.linux.org
+ */
+#define __IS_FLG(inode,flg) ((inode)->i_sb->s_flags & (flg))
+
+#define IS_RDONLY(inode) ((inode)->i_sb->s_flags & MS_RDONLY)
+#define IS_SYNC(inode)		(__IS_FLG(inode, MS_SYNCHRONOUS) || \
+					((inode)->i_flags & S_SYNC))
+#define IS_DIRSYNC(inode)	(__IS_FLG(inode, MS_SYNCHRONOUS|MS_DIRSYNC) || \
+					((inode)->i_flags & (S_SYNC|S_DIRSYNC)))
+#define IS_MANDLOCK(inode)	__IS_FLG(inode, MS_MANDLOCK)
+#define IS_NOATIME(inode)   __IS_FLG(inode, MS_RDONLY|MS_NOATIME)
+#define IS_I_VERSION(inode)   __IS_FLG(inode, MS_I_VERSION)
+
+#define IS_NOQUOTA(inode)	((inode)->i_flags & S_NOQUOTA)
+#define IS_APPEND(inode)	((inode)->i_flags & S_APPEND)
+#define IS_IMMUTABLE(inode)	((inode)->i_flags & S_IMMUTABLE)
+#define IS_POSIXACL(inode)	__IS_FLG(inode, MS_POSIXACL)
+
+#define IS_DEADDIR(inode)	((inode)->i_flags & S_DEAD)
+#define IS_NOCMTIME(inode)	((inode)->i_flags & S_NOCMTIME)
+#define IS_SWAPFILE(inode)	((inode)->i_flags & S_SWAPFILE)
+#define IS_PRIVATE(inode)	((inode)->i_flags & S_PRIVATE)
+#define IS_IMA(inode)		((inode)->i_flags & S_IMA)
+#define IS_AUTOMOUNT(inode)	((inode)->i_flags & S_AUTOMOUNT)
+#define IS_NOSEC(inode)		((inode)->i_flags & S_NOSEC)
+
+/* the read-only stuff doesn't really belong here, but any other place is
+   probably as bad and I don't want to create yet another include file. */
+
+#define BLKROSET   _IO(0x12,93)	/* set device read-only (0 = read-write) */
+#define BLKROGET   _IO(0x12,94)	/* get read-only status (0 = read_write) */
+#define BLKRRPART  _IO(0x12,95)	/* re-read partition table */
+#define BLKGETSIZE _IO(0x12,96)	/* return device size /512 (long *arg) */
+#define BLKFLSBUF  _IO(0x12,97)	/* flush buffer cache */
+#define BLKRASET   _IO(0x12,98)	/* set read ahead for block device */
+#define BLKRAGET   _IO(0x12,99)	/* get current read ahead setting */
+#define BLKFRASET  _IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */
+#define BLKFRAGET  _IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */
+#define BLKSECTSET _IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */
+#define BLKSECTGET _IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */
+#define BLKSSZGET  _IO(0x12,104)/* get block device sector size */
+#if 0
+#define BLKPG      _IO(0x12,105)/* See blkpg.h */
+
+/* Some people are morons.  Do not use sizeof! */
+
+#define BLKELVGET  _IOR(0x12,106,size_t)/* elevator get */
+#define BLKELVSET  _IOW(0x12,107,size_t)/* elevator set */
+/* This was here just to show that the number is taken -
+   probably all these _IO(0x12,*) ioctls should be moved to blkpg.h. */
+#endif
+/* A jump here: 108-111 have been used for various private purposes. */
+#define BLKBSZGET  _IOR(0x12,112,size_t)
+#define BLKBSZSET  _IOW(0x12,113,size_t)
+#define BLKGETSIZE64 _IOR(0x12,114,size_t)	/* return device size in bytes (u64 *arg) */
+#define BLKTRACESETUP _IOWR(0x12,115,struct blk_user_trace_setup)
+#define BLKTRACESTART _IO(0x12,116)
+#define BLKTRACESTOP _IO(0x12,117)
+#define BLKTRACETEARDOWN _IO(0x12,118)
+#define BLKDISCARD _IO(0x12,119)
+#define BLKIOMIN _IO(0x12,120)
+#define BLKIOOPT _IO(0x12,121)
+#define BLKALIGNOFF _IO(0x12,122)
+#define BLKPBSZGET _IO(0x12,123)
+#define BLKDISCARDZEROES _IO(0x12,124)
+#define BLKSECDISCARD _IO(0x12,125)
+#define BLKROTATIONAL _IO(0x12,126)
+
+#define BMAP_IOCTL 1		/* obsolete - kept for compatibility */
+#define FIBMAP	   _IO(0x00,1)	/* bmap access */
+#define FIGETBSZ   _IO(0x00,2)	/* get the block size used for bmap */
+#define FIFREEZE	_IOWR('X', 119, int)	/* Freeze */
+#define FITHAW		_IOWR('X', 120, int)	/* Thaw */
+#define FITRIM		_IOWR('X', 121, struct fstrim_range)	/* Trim */
+
+#define	FS_IOC_GETFLAGS			_IOR('f', 1, long)
+#define	FS_IOC_SETFLAGS			_IOW('f', 2, long)
+#define	FS_IOC_GETVERSION		_IOR('v', 1, long)
+#define	FS_IOC_SETVERSION		_IOW('v', 2, long)
+#define FS_IOC_FIEMAP			_IOWR('f', 11, struct fiemap)
+#define FS_IOC32_GETFLAGS		_IOR('f', 1, int)
+#define FS_IOC32_SETFLAGS		_IOW('f', 2, int)
+#define FS_IOC32_GETVERSION		_IOR('v', 1, int)
+#define FS_IOC32_SETVERSION		_IOW('v', 2, int)
+
+/*
+ * Inode flags (FS_IOC_GETFLAGS / FS_IOC_SETFLAGS)
+ */
+#define	FS_SECRM_FL			0x00000001 /* Secure deletion */
+#define	FS_UNRM_FL			0x00000002 /* Undelete */
+#define	FS_COMPR_FL			0x00000004 /* Compress file */
+#define FS_SYNC_FL			0x00000008 /* Synchronous updates */
+#define FS_IMMUTABLE_FL			0x00000010 /* Immutable file */
+#define FS_APPEND_FL			0x00000020 /* writes to file may only append */
+#define FS_NODUMP_FL			0x00000040 /* do not dump file */
+#define FS_NOATIME_FL			0x00000080 /* do not update atime */
+/* Reserved for compression usage... */
+#define FS_DIRTY_FL			0x00000100
+#define FS_COMPRBLK_FL			0x00000200 /* One or more compressed clusters */
+#define FS_NOCOMP_FL			0x00000400 /* Don't compress */
+#define FS_ECOMPR_FL			0x00000800 /* Compression error */
+/* End compression flags --- maybe not all used */
+#define FS_BTREE_FL			0x00001000 /* btree format dir */
+#define FS_INDEX_FL			0x00001000 /* hash-indexed directory */
+#define FS_IMAGIC_FL			0x00002000 /* AFS directory */
+#define FS_JOURNAL_DATA_FL		0x00004000 /* Reserved for ext3 */
+#define FS_NOTAIL_FL			0x00008000 /* file tail should not be merged */
+#define FS_DIRSYNC_FL			0x00010000 /* dirsync behaviour (directories only) */
+#define FS_TOPDIR_FL			0x00020000 /* Top of directory hierarchies*/
+#define FS_EXTENT_FL			0x00080000 /* Extents */
+#define FS_DIRECTIO_FL			0x00100000 /* Use direct i/o */
+#define FS_NOCOW_FL			0x00800000 /* Do not cow file */
+#define FS_RESERVED_FL			0x80000000 /* reserved for ext2 lib */
+
+#define FS_FL_USER_VISIBLE		0x0003DFFF /* User visible flags */
+#define FS_FL_USER_MODIFIABLE		0x000380FF /* User modifiable flags */
+
+
+#define SYNC_FILE_RANGE_WAIT_BEFORE	1
+#define SYNC_FILE_RANGE_WRITE		2
+#define SYNC_FILE_RANGE_WAIT_AFTER	4
+
+#ifdef __KERNEL__
+
+#include <linux/linkage.h>
+#include <linux/wait.h>
+#include <linux/kdev_t.h>
+#include <linux/dcache.h>
+#include <linux/path.h>
+#include <linux/stat.h>
+#include <linux/cache.h>
+#include <linux/list.h>
+#include <linux/radix-tree.h>
+#include <linux/prio_tree.h>
+#include <linux/init.h>
+#include <linux/pid.h>
+#include <linux/bug.h>
+#include <linux/mutex.h>
+#include <linux/capability.h>
+#include <linux/semaphore.h>
+#include <linux/fiemap.h>
+#include <linux/rculist_bl.h>
+#include <linux/atomic.h>
+#include <linux/shrinker.h>
+#include <linux/migrate_mode.h>
+
+#include <asm/byteorder.h>
+
+struct export_operations;
+struct hd_geometry;
+struct iovec;
+struct nameidata;
+struct kiocb;
+struct kobject;
+struct pipe_inode_info;
+struct poll_table_struct;
+struct kstatfs;
+struct vm_area_struct;
+struct vfsmount;
+struct cred;
+
+extern void __init inode_init(void);
+extern void __init inode_init_early(void);
+extern void __init files_init(unsigned long);
+
+extern struct files_stat_struct files_stat;
+extern unsigned long get_max_files(void);
+extern int sysctl_nr_open;
+extern struct inodes_stat_t inodes_stat;
+extern int leases_enable, lease_break_time;
+
+struct buffer_head;
+typedef int (get_block_t)(struct inode *inode, sector_t iblock,
+			struct buffer_head *bh_result, int create);
+typedef void (dio_iodone_t)(struct kiocb *iocb, loff_t offset,
+			ssize_t bytes, void *private, int ret,
+			bool is_async);
+
+/*
+ * Attribute flags.  These should be or-ed together to figure out what
+ * has been changed!
+ */
+#define ATTR_MODE	(1 << 0)
+#define ATTR_UID	(1 << 1)
+#define ATTR_GID	(1 << 2)
+#define ATTR_SIZE	(1 << 3)
+#define ATTR_ATIME	(1 << 4)
+#define ATTR_MTIME	(1 << 5)
+#define ATTR_CTIME	(1 << 6)
+#define ATTR_ATIME_SET	(1 << 7)
+#define ATTR_MTIME_SET	(1 << 8)
+#define ATTR_FORCE	(1 << 9) /* Not a change, but a change it */
+#define ATTR_ATTR_FLAG	(1 << 10)
+#define ATTR_KILL_SUID	(1 << 11)
+#define ATTR_KILL_SGID	(1 << 12)
+#define ATTR_FILE	(1 << 13)
+#define ATTR_KILL_PRIV	(1 << 14)
+#define ATTR_OPEN	(1 << 15) /* Truncating from open(O_TRUNC) */
+#define ATTR_TIMES_SET	(1 << 16)
+
+/*
+ * This is the Inode Attributes structure, used for notify_change().  It
+ * uses the above definitions as flags, to know which values have changed.
+ * Also, in this manner, a Filesystem can look at only the values it cares
+ * about.  Basically, these are the attributes that the VFS layer can
+ * request to change from the FS layer.
+ *
+ * Derek Atkins <warlord@MIT.EDU> 94-10-20
+ */
+struct iattr {
+	unsigned int	ia_valid;
+	umode_t		ia_mode;
+	uid_t		ia_uid;
+	gid_t		ia_gid;
+	loff_t		ia_size;
+	struct timespec	ia_atime;
+	struct timespec	ia_mtime;
+	struct timespec	ia_ctime;
+
+	/*
+	 * Not an attribute, but an auxiliary info for filesystems wanting to
+	 * implement an ftruncate() like method.  NOTE: filesystem should
+	 * check for (ia_valid & ATTR_FILE), and not for (ia_file != NULL).
+	 */
+	struct file	*ia_file;
+};
+
+/*
+ * Includes for diskquotas.
+ */
+#include <linux/quota.h>
+
+/** 
+ * enum positive_aop_returns - aop return codes with specific semantics
+ *
+ * @AOP_WRITEPAGE_ACTIVATE: Informs the caller that page writeback has
+ * 			    completed, that the page is still locked, and
+ * 			    should be considered active.  The VM uses this hint
+ * 			    to return the page to the active list -- it won't
+ * 			    be a candidate for writeback again in the near
+ * 			    future.  Other callers must be careful to unlock
+ * 			    the page if they get this return.  Returned by
+ * 			    writepage(); 
+ *
+ * @AOP_TRUNCATED_PAGE: The AOP method that was handed a locked page has
+ *  			unlocked it and the page might have been truncated.
+ *  			The caller should back up to acquiring a new page and
+ *  			trying again.  The aop will be taking reasonable
+ *  			precautions not to livelock.  If the caller held a page
+ *  			reference, it should drop it before retrying.  Returned
+ *  			by readpage().
+ *
+ * address_space_operation functions return these large constants to indicate
+ * special semantics to the caller.  These are much larger than the bytes in a
+ * page to allow for functions that return the number of bytes operated on in a
+ * given page.
+ */
+
+enum positive_aop_returns {
+	AOP_WRITEPAGE_ACTIVATE	= 0x80000,
+	AOP_TRUNCATED_PAGE	= 0x80001,
+};
+
+#define AOP_FLAG_UNINTERRUPTIBLE	0x0001 /* will not do a short write */
+#define AOP_FLAG_CONT_EXPAND		0x0002 /* called from cont_expand */
+#define AOP_FLAG_NOFS			0x0004 /* used by filesystem to direct
+						* helper code (eg buffer layer)
+						* to clear GFP_FS from alloc */
+
+/*
+ * oh the beauties of C type declarations.
+ */
+struct page;
+struct address_space;
+struct writeback_control;
+
+struct iov_iter {
+	const struct iovec *iov;
+	unsigned long nr_segs;
+	size_t iov_offset;
+	size_t count;
+};
+
+size_t iov_iter_copy_from_user_atomic(struct page *page,
+		struct iov_iter *i, unsigned long offset, size_t bytes);
+size_t iov_iter_copy_from_user(struct page *page,
+		struct iov_iter *i, unsigned long offset, size_t bytes);
+void iov_iter_advance(struct iov_iter *i, size_t bytes);
+int iov_iter_fault_in_readable(struct iov_iter *i, size_t bytes);
+size_t iov_iter_single_seg_count(struct iov_iter *i);
+
+static inline void iov_iter_init(struct iov_iter *i,
+			const struct iovec *iov, unsigned long nr_segs,
+			size_t count, size_t written)
+{
+	i->iov = iov;
+	i->nr_segs = nr_segs;
+	i->iov_offset = 0;
+	i->count = count + written;
+
+	iov_iter_advance(i, written);
+}
+
+static inline size_t iov_iter_count(struct iov_iter *i)
+{
+	return i->count;
+}
+
+/*
+ * "descriptor" for what we're up to with a read.
+ * This allows us to use the same read code yet
+ * have multiple different users of the data that
+ * we read from a file.
+ *
+ * The simplest case just copies the data to user
+ * mode.
+ */
+typedef struct {
+	size_t written;
+	size_t count;
+	union {
+		char __user *buf;
+		void *data;
+	} arg;
+	int error;
+} read_descriptor_t;
+
+typedef int (*read_actor_t)(read_descriptor_t *, struct page *,
+		unsigned long, unsigned long);
+
+struct address_space_operations {
+	int (*writepage)(struct page *page, struct writeback_control *wbc);
+	int (*readpage)(struct file *, struct page *);
+
+	/* Write back some dirty pages from this mapping. */
+	int (*writepages)(struct address_space *, struct writeback_control *);
+
+	/* Set a page dirty.  Return true if this dirtied it */
+	int (*set_page_dirty)(struct page *page);
+
+	int (*readpages)(struct file *filp, struct address_space *mapping,
+			struct list_head *pages, unsigned nr_pages);
+
+	int (*write_begin)(struct file *, struct address_space *mapping,
+				loff_t pos, unsigned len, unsigned flags,
+				struct page **pagep, void **fsdata);
+	int (*write_end)(struct file *, struct address_space *mapping,
+				loff_t pos, unsigned len, unsigned copied,
+				struct page *page, void *fsdata);
+
+	/* Unfortunately this kludge is needed for FIBMAP. Don't use it */
+	sector_t (*bmap)(struct address_space *, sector_t);
+	void (*invalidatepage) (struct page *, unsigned long);
+	int (*releasepage) (struct page *, gfp_t);
+	void (*freepage)(struct page *);
+	ssize_t (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
+			loff_t offset, unsigned long nr_segs);
+	int (*get_xip_mem)(struct address_space *, pgoff_t, int,
+						void **, unsigned long *);
+	/*
+	 * migrate the contents of a page to the specified target. If sync
+	 * is false, it must not block.
+	 */
+	int (*migratepage) (struct address_space *,
+			struct page *, struct page *, enum migrate_mode);
+	int (*launder_page) (struct page *);
+	int (*is_partially_uptodate) (struct page *, read_descriptor_t *,
+					unsigned long);
+	int (*error_remove_page)(struct address_space *, struct page *);
+};
+
+extern const struct address_space_operations empty_aops;
+
+/*
+ * pagecache_write_begin/pagecache_write_end must be used by general code
+ * to write into the pagecache.
+ */
+int pagecache_write_begin(struct file *, struct address_space *mapping,
+				loff_t pos, unsigned len, unsigned flags,
+				struct page **pagep, void **fsdata);
+
+int pagecache_write_end(struct file *, struct address_space *mapping,
+				loff_t pos, unsigned len, unsigned copied,
+				struct page *page, void *fsdata);
+
+struct backing_dev_info;
+struct address_space {
+	struct inode		*host;		/* owner: inode, block_device */
+	struct radix_tree_root	page_tree;	/* radix tree of all pages */
+	spinlock_t		tree_lock;	/* and lock protecting it */
+	unsigned int		i_mmap_writable;/* count VM_SHARED mappings */
+	struct prio_tree_root	i_mmap;		/* tree of private and shared mappings */
+	struct list_head	i_mmap_nonlinear;/*list VM_NONLINEAR mappings */
+	struct mutex		i_mmap_mutex;	/* protect tree, count, list */
+	/* Protected by tree_lock together with the radix tree */
+	unsigned long		nrpages;	/* number of total pages */
+	pgoff_t			writeback_index;/* writeback starts here */
+	const struct address_space_operations *a_ops;	/* methods */
+	unsigned long		flags;		/* error bits/gfp mask */
+	struct backing_dev_info *backing_dev_info; /* device readahead, etc */
+	spinlock_t		private_lock;	/* for use by the address_space */
+	struct list_head	private_list;	/* ditto */
+	struct address_space	*assoc_mapping;	/* ditto */
+} __attribute__((aligned(sizeof(long))));
+	/*
+	 * On most architectures that alignment is already the case; but
+	 * must be enforced here for CRIS, to let the least significant bit
+	 * of struct page's "mapping" pointer be used for PAGE_MAPPING_ANON.
+	 */
+struct request_queue;
+
+struct block_device {
+	dev_t			bd_dev;  /* not a kdev_t - it's a search key */
+	int			bd_openers;
+	struct inode *		bd_inode;	/* will die */
+	struct super_block *	bd_super;
+	struct mutex		bd_mutex;	/* open/close mutex */
+	struct list_head	bd_inodes;
+	void *			bd_claiming;
+	void *			bd_holder;
+	int			bd_holders;
+	bool			bd_write_holder;
+#ifdef CONFIG_SYSFS
+	struct list_head	bd_holder_disks;
+#endif
+	struct block_device *	bd_contains;
+	unsigned		bd_block_size;
+	struct hd_struct *	bd_part;
+	/* number of times partitions within this device have been opened. */
+	unsigned		bd_part_count;
+	int			bd_invalidated;
+	struct gendisk *	bd_disk;
+	struct request_queue *  bd_queue;
+	struct list_head	bd_list;
+	/*
+	 * Private data.  You must have bd_claim'ed the block_device
+	 * to use this.  NOTE:  bd_claim allows an owner to claim
+	 * the same device multiple times, the owner must take special
+	 * care to not mess up bd_private for that case.
+	 */
+	unsigned long		bd_private;
+
+	/* The counter of freeze processes */
+	int			bd_fsfreeze_count;
+	/* Mutex for freeze */
+	struct mutex		bd_fsfreeze_mutex;
+};
+
+/*
+ * Radix-tree tags, for tagging dirty and writeback pages within the pagecache
+ * radix trees
+ */
+#define PAGECACHE_TAG_DIRTY	0
+#define PAGECACHE_TAG_WRITEBACK	1
+#define PAGECACHE_TAG_TOWRITE	2
+
+int mapping_tagged(struct address_space *mapping, int tag);
+
+/*
+ * Might pages of this file be mapped into userspace?
+ */
+static inline int mapping_mapped(struct address_space *mapping)
+{
+	return	!prio_tree_empty(&mapping->i_mmap) ||
+		!list_empty(&mapping->i_mmap_nonlinear);
+}
+
+/*
+ * Might pages of this file have been modified in userspace?
+ * Note that i_mmap_writable counts all VM_SHARED vmas: do_mmap_pgoff
+ * marks vma as VM_SHARED if it is shared, and the file was opened for
+ * writing i.e. vma may be mprotected writable even if now readonly.
+ */
+static inline int mapping_writably_mapped(struct address_space *mapping)
+{
+	return mapping->i_mmap_writable != 0;
+}
+
+/*
+ * Use sequence counter to get consistent i_size on 32-bit processors.
+ */
+#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
+#include <linux/seqlock.h>
+#define __NEED_I_SIZE_ORDERED
+#define i_size_ordered_init(inode) seqcount_init(&inode->i_size_seqcount)
+#else
+#define i_size_ordered_init(inode) do { } while (0)
+#endif
+
+struct posix_acl;
+#define ACL_NOT_CACHED ((void *)(-1))
+
+#define IOP_FASTPERM	0x0001
+#define IOP_LOOKUP	0x0002
+#define IOP_NOFOLLOW	0x0004
+
+/*
+ * Keep mostly read-only and often accessed (especially for
+ * the RCU path lookup and 'stat' data) fields at the beginning
+ * of the 'struct inode'
+ */
+struct inode {
+	umode_t			i_mode;
+	unsigned short		i_opflags;
+	uid_t			i_uid;
+	gid_t			i_gid;
+	unsigned int		i_flags;
+
+#ifdef CONFIG_FS_POSIX_ACL
+	struct posix_acl	*i_acl;
+	struct posix_acl	*i_default_acl;
+#endif
+
+	const struct inode_operations	*i_op;
+	struct super_block	*i_sb;
+	struct address_space	*i_mapping;
+
+#ifdef CONFIG_SECURITY
+	void			*i_security;
+#endif
+
+	/* Stat data, not accessed from path walking */
+	unsigned long		i_ino;
+	/*
+	 * Filesystems may only read i_nlink directly.  They shall use the
+	 * following functions for modification:
+	 *
+	 *    (set|clear|inc|drop)_nlink
+	 *    inode_(inc|dec)_link_count
+	 */
+	union {
+		const unsigned int i_nlink;
+		unsigned int __i_nlink;
+	};
+	dev_t			i_rdev;
+	struct timespec		i_atime;
+	struct timespec		i_mtime;
+	struct timespec		i_ctime;
+	spinlock_t		i_lock;	/* i_blocks, i_bytes, maybe i_size */
+	unsigned short          i_bytes;
+	blkcnt_t		i_blocks;
+	loff_t			i_size;
+
+#ifdef __NEED_I_SIZE_ORDERED
+	seqcount_t		i_size_seqcount;
+#endif
+
+	/* Misc */
+	unsigned long		i_state;
+	struct mutex		i_mutex;
+
+	unsigned long		dirtied_when;	/* jiffies of first dirtying */
+
+	struct hlist_node	i_hash;
+	struct list_head	i_wb_list;	/* backing dev IO list */
+	struct list_head	i_lru;		/* inode LRU list */
+	struct list_head	i_sb_list;
+	union {
+		struct list_head	i_dentry;
+		struct rcu_head		i_rcu;
+	};
+	atomic_t		i_count;
+	unsigned int		i_blkbits;
+	u64			i_version;
+	atomic_t		i_dio_count;
+	atomic_t		i_writecount;
+	const struct file_operations	*i_fop;	/* former ->i_op->default_file_ops */
+	struct file_lock	*i_flock;
+	struct address_space	i_data;
+#ifdef CONFIG_QUOTA
+	struct dquot		*i_dquot[MAXQUOTAS];
+#endif
+	struct list_head	i_devices;
+	union {
+		struct pipe_inode_info	*i_pipe;
+		struct block_device	*i_bdev;
+		struct cdev		*i_cdev;
+	};
+
+	__u32			i_generation;
+
+#ifdef CONFIG_FSNOTIFY
+	__u32			i_fsnotify_mask; /* all events this inode cares about */
+	struct hlist_head	i_fsnotify_marks;
+#endif
+
+#ifdef CONFIG_IMA
+	atomic_t		i_readcount; /* struct files open RO */
+#endif
+	void			*i_private; /* fs or device private pointer */
+};
+
+static inline int inode_unhashed(struct inode *inode)
+{
+	return hlist_unhashed(&inode->i_hash);
+}
+
+/*
+ * inode->i_mutex nesting subclasses for the lock validator:
+ *
+ * 0: the object of the current VFS operation
+ * 1: parent
+ * 2: child/target
+ * 3: quota file
+ *
+ * The locking order between these classes is
+ * parent -> child -> normal -> xattr -> quota
+ */
+enum inode_i_mutex_lock_class
+{
+	I_MUTEX_NORMAL,
+	I_MUTEX_PARENT,
+	I_MUTEX_CHILD,
+	I_MUTEX_XATTR,
+	I_MUTEX_QUOTA
+};
+
+/*
+ * NOTE: in a 32bit arch with a preemptable kernel and
+ * an UP compile the i_size_read/write must be atomic
+ * with respect to the local cpu (unlike with preempt disabled),
+ * but they don't need to be atomic with respect to other cpus like in
+ * true SMP (so they need either to either locally disable irq around
+ * the read or for example on x86 they can be still implemented as a
+ * cmpxchg8b without the need of the lock prefix). For SMP compiles
+ * and 64bit archs it makes no difference if preempt is enabled or not.
+ */
+static inline loff_t i_size_read(const struct inode *inode)
+{
+#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
+	loff_t i_size;
+	unsigned int seq;
+
+	do {
+		seq = read_seqcount_begin(&inode->i_size_seqcount);
+		i_size = inode->i_size;
+	} while (read_seqcount_retry(&inode->i_size_seqcount, seq));
+	return i_size;
+#elif BITS_PER_LONG==32 && defined(CONFIG_PREEMPT)
+	loff_t i_size;
+
+	preempt_disable();
+	i_size = inode->i_size;
+	preempt_enable();
+	return i_size;
+#else
+	return inode->i_size;
+#endif
+}
+
+/*
+ * NOTE: unlike i_size_read(), i_size_write() does need locking around it
+ * (normally i_mutex), otherwise on 32bit/SMP an update of i_size_seqcount
+ * can be lost, resulting in subsequent i_size_read() calls spinning forever.
+ */
+static inline void i_size_write(struct inode *inode, loff_t i_size)
+{
+#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
+	write_seqcount_begin(&inode->i_size_seqcount);
+	inode->i_size = i_size;
+	write_seqcount_end(&inode->i_size_seqcount);
+#elif BITS_PER_LONG==32 && defined(CONFIG_PREEMPT)
+	preempt_disable();
+	inode->i_size = i_size;
+	preempt_enable();
+#else
+	inode->i_size = i_size;
+#endif
+}
+
+static inline unsigned iminor(const struct inode *inode)
+{
+	return MINOR(inode->i_rdev);
+}
+
+static inline unsigned imajor(const struct inode *inode)
+{
+	return MAJOR(inode->i_rdev);
+}
+
+extern struct block_device *I_BDEV(struct inode *inode);
+
+struct fown_struct {
+	rwlock_t lock;          /* protects pid, uid, euid fields */
+	struct pid *pid;	/* pid or -pgrp where SIGIO should be sent */
+	enum pid_type pid_type;	/* Kind of process group SIGIO should be sent to */
+	uid_t uid, euid;	/* uid/euid of process setting the owner */
+	int signum;		/* posix.1b rt signal to be delivered on IO */
+};
+
+/*
+ * Track a single file's readahead state
+ */
+struct file_ra_state {
+	pgoff_t start;			/* where readahead started */
+	unsigned int size;		/* # of readahead pages */
+	unsigned int async_size;	/* do asynchronous readahead when
+					   there are only # of pages ahead */
+
+	unsigned int ra_pages;		/* Maximum readahead window */
+	unsigned int mmap_miss;		/* Cache miss stat for mmap accesses */
+	loff_t prev_pos;		/* Cache last read() position */
+};
+
+/*
+ * Check if @index falls in the readahead windows.
+ */
+static inline int ra_has_index(struct file_ra_state *ra, pgoff_t index)
+{
+	return (index >= ra->start &&
+		index <  ra->start + ra->size);
+}
+
+#define FILE_MNT_WRITE_TAKEN	1
+#define FILE_MNT_WRITE_RELEASED	2
+
+struct file {
+	/*
+	 * fu_list becomes invalid after file_free is called and queued via
+	 * fu_rcuhead for RCU freeing
+	 */
+	union {
+		struct list_head	fu_list;
+		struct rcu_head 	fu_rcuhead;
+	} f_u;
+	struct path		f_path;
+#define f_dentry	f_path.dentry
+#define f_vfsmnt	f_path.mnt
+	const struct file_operations	*f_op;
+
+	/*
+	 * Protects f_ep_links, f_flags, f_pos vs i_size in lseek SEEK_CUR.
+	 * Must not be taken from IRQ context.
+	 */
+	spinlock_t		f_lock;
+#ifdef CONFIG_SMP
+	int			f_sb_list_cpu;
+#endif
+	atomic_long_t		f_count;
+	unsigned int 		f_flags;
+	fmode_t			f_mode;
+	loff_t			f_pos;
+	struct fown_struct	f_owner;
+	const struct cred	*f_cred;
+	struct file_ra_state	f_ra;
+
+	u64			f_version;
+#ifdef CONFIG_SECURITY
+	void			*f_security;
+#endif
+	/* needed for tty driver, and maybe others */
+	void			*private_data;
+
+#ifdef CONFIG_EPOLL
+	/* Used by fs/eventpoll.c to link all the hooks to this file */
+	struct list_head	f_ep_links;
+	struct list_head	f_tfile_llink;
+#endif /* #ifdef CONFIG_EPOLL */
+	struct address_space	*f_mapping;
+#ifdef CONFIG_DEBUG_WRITECOUNT
+	unsigned long f_mnt_write_state;
+#endif
+};
+
+struct file_handle {
+	__u32 handle_bytes;
+	int handle_type;
+	/* file identifier */
+	unsigned char f_handle[0];
+};
+
+#define get_file(x)	atomic_long_inc(&(x)->f_count)
+#define fput_atomic(x)	atomic_long_add_unless(&(x)->f_count, -1, 1)
+#define file_count(x)	atomic_long_read(&(x)->f_count)
+
+#ifdef CONFIG_DEBUG_WRITECOUNT
+static inline void file_take_write(struct file *f)
+{
+	WARN_ON(f->f_mnt_write_state != 0);
+	f->f_mnt_write_state = FILE_MNT_WRITE_TAKEN;
+}
+static inline void file_release_write(struct file *f)
+{
+	f->f_mnt_write_state |= FILE_MNT_WRITE_RELEASED;
+}
+static inline void file_reset_write(struct file *f)
+{
+	f->f_mnt_write_state = 0;
+}
+static inline void file_check_state(struct file *f)
+{
+	/*
+	 * At this point, either both or neither of these bits
+	 * should be set.
+	 */
+	WARN_ON(f->f_mnt_write_state == FILE_MNT_WRITE_TAKEN);
+	WARN_ON(f->f_mnt_write_state == FILE_MNT_WRITE_RELEASED);
+}
+static inline int file_check_writeable(struct file *f)
+{
+	if (f->f_mnt_write_state == FILE_MNT_WRITE_TAKEN)
+		return 0;
+	printk(KERN_WARNING "writeable file with no "
+			    "mnt_want_write()\n");
+	WARN_ON(1);
+	return -EINVAL;
+}
+#else /* !CONFIG_DEBUG_WRITECOUNT */
+static inline void file_take_write(struct file *filp) {}
+static inline void file_release_write(struct file *filp) {}
+static inline void file_reset_write(struct file *filp) {}
+static inline void file_check_state(struct file *filp) {}
+static inline int file_check_writeable(struct file *filp)
+{
+	return 0;
+}
+#endif /* CONFIG_DEBUG_WRITECOUNT */
+
+#define	MAX_NON_LFS	((1UL<<31) - 1)
+
+/* Page cache limit. The filesystems should put that into their s_maxbytes 
+   limits, otherwise bad things can happen in VM. */ 
+#if BITS_PER_LONG==32
+#define MAX_LFS_FILESIZE	(((u64)PAGE_CACHE_SIZE << (BITS_PER_LONG-1))-1) 
+#elif BITS_PER_LONG==64
+#define MAX_LFS_FILESIZE 	0x7fffffffffffffffUL
+#endif
+
+#define FL_POSIX	1
+#define FL_FLOCK	2
+#define FL_ACCESS	8	/* not trying to lock, just looking */
+#define FL_EXISTS	16	/* when unlocking, test for existence */
+#define FL_LEASE	32	/* lease held on this file */
+#define FL_CLOSE	64	/* unlock on close */
+#define FL_SLEEP	128	/* A blocking lock */
+#define FL_DOWNGRADE_PENDING	256 /* Lease is being downgraded */
+#define FL_UNLOCK_PENDING	512 /* Lease is being broken */
+
+/*
+ * Special return value from posix_lock_file() and vfs_lock_file() for
+ * asynchronous locking.
+ */
+#define FILE_LOCK_DEFERRED 1
+
+/*
+ * The POSIX file lock owner is determined by
+ * the "struct files_struct" in the thread group
+ * (or NULL for no owner - BSD locks).
+ *
+ * Lockd stuffs a "host" pointer into this.
+ */
+typedef struct files_struct *fl_owner_t;
+
+struct file_lock_operations {
+	void (*fl_copy_lock)(struct file_lock *, struct file_lock *);
+	void (*fl_release_private)(struct file_lock *);
+};
+
+struct lock_manager_operations {
+	int (*lm_compare_owner)(struct file_lock *, struct file_lock *);
+	void (*lm_notify)(struct file_lock *);	/* unblock callback */
+	int (*lm_grant)(struct file_lock *, struct file_lock *, int);
+	void (*lm_release_private)(struct file_lock *);
+	void (*lm_break)(struct file_lock *);
+	int (*lm_change)(struct file_lock **, int);
+};
+
+struct lock_manager {
+	struct list_head list;
+};
+
+void locks_start_grace(struct lock_manager *);
+void locks_end_grace(struct lock_manager *);
+int locks_in_grace(void);
+
+/* that will die - we need it for nfs_lock_info */
+#include <linux/nfs_fs_i.h>
+
+struct file_lock {
+	struct file_lock *fl_next;	/* singly linked list for this inode  */
+	struct list_head fl_link;	/* doubly linked list of all locks */
+	struct list_head fl_block;	/* circular list of blocked processes */
+	fl_owner_t fl_owner;
+	unsigned int fl_flags;
+	unsigned char fl_type;
+	unsigned int fl_pid;
+	struct pid *fl_nspid;
+	wait_queue_head_t fl_wait;
+	struct file *fl_file;
+	loff_t fl_start;
+	loff_t fl_end;
+
+	struct fasync_struct *	fl_fasync; /* for lease break notifications */
+	/* for lease breaks: */
+	unsigned long fl_break_time;
+	unsigned long fl_downgrade_time;
+
+	const struct file_lock_operations *fl_ops;	/* Callbacks for filesystems */
+	const struct lock_manager_operations *fl_lmops;	/* Callbacks for lockmanagers */
+	union {
+		struct nfs_lock_info	nfs_fl;
+		struct nfs4_lock_info	nfs4_fl;
+		struct {
+			struct list_head link;	/* link in AFS vnode's pending_locks list */
+			int state;		/* state of grant or error if -ve */
+		} afs;
+	} fl_u;
+};
+
+/* The following constant reflects the upper bound of the file/locking space */
+#ifndef OFFSET_MAX
+#define INT_LIMIT(x)	(~((x)1 << (sizeof(x)*8 - 1)))
+#define OFFSET_MAX	INT_LIMIT(loff_t)
+#define OFFT_OFFSET_MAX	INT_LIMIT(off_t)
+#endif
+
+#include <linux/fcntl.h>
+
+extern void send_sigio(struct fown_struct *fown, int fd, int band);
+
+#ifdef CONFIG_FILE_LOCKING
+extern int fcntl_getlk(struct file *, struct flock __user *);
+extern int fcntl_setlk(unsigned int, struct file *, unsigned int,
+			struct flock __user *);
+
+#if BITS_PER_LONG == 32
+extern int fcntl_getlk64(struct file *, struct flock64 __user *);
+extern int fcntl_setlk64(unsigned int, struct file *, unsigned int,
+			struct flock64 __user *);
+#endif
+
+extern int fcntl_setlease(unsigned int fd, struct file *filp, long arg);
+extern int fcntl_getlease(struct file *filp);
+
+/* fs/locks.c */
+void locks_free_lock(struct file_lock *fl);
+extern void locks_init_lock(struct file_lock *);
+extern struct file_lock * locks_alloc_lock(void);
+extern void locks_copy_lock(struct file_lock *, struct file_lock *);
+extern void __locks_copy_lock(struct file_lock *, const struct file_lock *);
+extern void locks_remove_posix(struct file *, fl_owner_t);
+extern void locks_remove_flock(struct file *);
+extern void locks_release_private(struct file_lock *);
+extern void posix_test_lock(struct file *, struct file_lock *);
+extern int posix_lock_file(struct file *, struct file_lock *, struct file_lock *);
+extern int posix_lock_file_wait(struct file *, struct file_lock *);
+extern int posix_unblock_lock(struct file *, struct file_lock *);
+extern int vfs_test_lock(struct file *, struct file_lock *);
+extern int vfs_lock_file(struct file *, unsigned int, struct file_lock *, struct file_lock *);
+extern int vfs_cancel_lock(struct file *filp, struct file_lock *fl);
+extern int flock_lock_file_wait(struct file *filp, struct file_lock *fl);
+extern int __break_lease(struct inode *inode, unsigned int flags);
+extern void lease_get_mtime(struct inode *, struct timespec *time);
+extern int generic_setlease(struct file *, long, struct file_lock **);
+extern int vfs_setlease(struct file *, long, struct file_lock **);
+extern int lease_modify(struct file_lock **, int);
+extern int lock_may_read(struct inode *, loff_t start, unsigned long count);
+extern int lock_may_write(struct inode *, loff_t start, unsigned long count);
+extern void locks_delete_block(struct file_lock *waiter);
+extern void lock_flocks(void);
+extern void unlock_flocks(void);
+#else /* !CONFIG_FILE_LOCKING */
+static inline int fcntl_getlk(struct file *file, struct flock __user *user)
+{
+	return -EINVAL;
+}
+
+static inline int fcntl_setlk(unsigned int fd, struct file *file,
+			      unsigned int cmd, struct flock __user *user)
+{
+	return -EACCES;
+}
+
+#if BITS_PER_LONG == 32
+static inline int fcntl_getlk64(struct file *file, struct flock64 __user *user)
+{
+	return -EINVAL;
+}
+
+static inline int fcntl_setlk64(unsigned int fd, struct file *file,
+				unsigned int cmd, struct flock64 __user *user)
+{
+	return -EACCES;
+}
+#endif
+static inline int fcntl_setlease(unsigned int fd, struct file *filp, long arg)
+{
+	return 0;
+}
+
+static inline int fcntl_getlease(struct file *filp)
+{
+	return 0;
+}
+
+static inline void locks_init_lock(struct file_lock *fl)
+{
+	return;
+}
+
+static inline void __locks_copy_lock(struct file_lock *new, struct file_lock *fl)
+{
+	return;
+}
+
+static inline void locks_copy_lock(struct file_lock *new, struct file_lock *fl)
+{
+	return;
+}
+
+static inline void locks_remove_posix(struct file *filp, fl_owner_t owner)
+{
+	return;
+}
+
+static inline void locks_remove_flock(struct file *filp)
+{
+	return;
+}
+
+static inline void posix_test_lock(struct file *filp, struct file_lock *fl)
+{
+	return;
+}
+
+static inline int posix_lock_file(struct file *filp, struct file_lock *fl,
+				  struct file_lock *conflock)
+{
+	return -ENOLCK;
+}
+
+static inline int posix_lock_file_wait(struct file *filp, struct file_lock *fl)
+{
+	return -ENOLCK;
+}
+
+static inline int posix_unblock_lock(struct file *filp,
+				     struct file_lock *waiter)
+{
+	return -ENOENT;
+}
+
+static inline int vfs_test_lock(struct file *filp, struct file_lock *fl)
+{
+	return 0;
+}
+
+static inline int vfs_lock_file(struct file *filp, unsigned int cmd,
+				struct file_lock *fl, struct file_lock *conf)
+{
+	return -ENOLCK;
+}
+
+static inline int vfs_cancel_lock(struct file *filp, struct file_lock *fl)
+{
+	return 0;
+}
+
+static inline int flock_lock_file_wait(struct file *filp,
+				       struct file_lock *request)
+{
+	return -ENOLCK;
+}
+
+static inline int __break_lease(struct inode *inode, unsigned int mode)
+{
+	return 0;
+}
+
+static inline void lease_get_mtime(struct inode *inode, struct timespec *time)
+{
+	return;
+}
+
+static inline int generic_setlease(struct file *filp, long arg,
+				    struct file_lock **flp)
+{
+	return -EINVAL;
+}
+
+static inline int vfs_setlease(struct file *filp, long arg,
+			       struct file_lock **lease)
+{
+	return -EINVAL;
+}
+
+static inline int lease_modify(struct file_lock **before, int arg)
+{
+	return -EINVAL;
+}
+
+static inline int lock_may_read(struct inode *inode, loff_t start,
+				unsigned long len)
+{
+	return 1;
+}
+
+static inline int lock_may_write(struct inode *inode, loff_t start,
+				 unsigned long len)
+{
+	return 1;
+}
+
+static inline void locks_delete_block(struct file_lock *waiter)
+{
+}
+
+static inline void lock_flocks(void)
+{
+}
+
+static inline void unlock_flocks(void)
+{
+}
+
+#endif /* !CONFIG_FILE_LOCKING */
+
+
+struct fasync_struct {
+	spinlock_t		fa_lock;
+	int			magic;
+	int			fa_fd;
+	struct fasync_struct	*fa_next; /* singly linked list */
+	struct file		*fa_file;
+	struct rcu_head		fa_rcu;
+};
+
+#define FASYNC_MAGIC 0x4601
+
+/* SMP safe fasync helpers: */
+extern int fasync_helper(int, struct file *, int, struct fasync_struct **);
+extern struct fasync_struct *fasync_insert_entry(int, struct file *, struct fasync_struct **, struct fasync_struct *);
+extern int fasync_remove_entry(struct file *, struct fasync_struct **);
+extern struct fasync_struct *fasync_alloc(void);
+extern void fasync_free(struct fasync_struct *);
+
+/* can be called from interrupts */
+extern void kill_fasync(struct fasync_struct **, int, int);
+
+extern int __f_setown(struct file *filp, struct pid *, enum pid_type, int force);
+extern int f_setown(struct file *filp, unsigned long arg, int force);
+extern void f_delown(struct file *filp);
+extern pid_t f_getown(struct file *filp);
+extern int send_sigurg(struct fown_struct *fown);
+
+/*
+ *	Umount options
+ */
+
+#define MNT_FORCE	0x00000001	/* Attempt to forcibily umount */
+#define MNT_DETACH	0x00000002	/* Just detach from the tree */
+#define MNT_EXPIRE	0x00000004	/* Mark for expiry */
+#define UMOUNT_NOFOLLOW	0x00000008	/* Don't follow symlink on umount */
+#define UMOUNT_UNUSED	0x80000000	/* Flag guaranteed to be unused */
+
+extern struct list_head super_blocks;
+extern spinlock_t sb_lock;
+
+struct super_block {
+	struct list_head	s_list;		/* Keep this first */
+	dev_t			s_dev;		/* search index; _not_ kdev_t */
+	unsigned char		s_dirt;
+	unsigned char		s_blocksize_bits;
+	unsigned long		s_blocksize;
+	loff_t			s_maxbytes;	/* Max file size */
+	struct file_system_type	*s_type;
+	const struct super_operations	*s_op;
+	const struct dquot_operations	*dq_op;
+	const struct quotactl_ops	*s_qcop;
+	const struct export_operations *s_export_op;
+	unsigned long		s_flags;
+	unsigned long		s_magic;
+	struct dentry		*s_root;
+	struct rw_semaphore	s_umount;
+	struct mutex		s_lock;
+	int			s_count;
+	atomic_t		s_active;
+#ifdef CONFIG_SECURITY
+	void                    *s_security;
+#endif
+	const struct xattr_handler **s_xattr;
+
+	struct list_head	s_inodes;	/* all inodes */
+	struct hlist_bl_head	s_anon;		/* anonymous dentries for (nfs) exporting */
+#ifdef CONFIG_SMP
+	struct list_head __percpu *s_files;
+#else
+	struct list_head	s_files;
+#endif
+	struct list_head	s_mounts;	/* list of mounts; _not_ for fs use */
+	/* s_dentry_lru, s_nr_dentry_unused protected by dcache.c lru locks */
+	struct list_head	s_dentry_lru;	/* unused dentry lru */
+	int			s_nr_dentry_unused;	/* # of dentry on lru */
+
+	/* s_inode_lru_lock protects s_inode_lru and s_nr_inodes_unused */
+	spinlock_t		s_inode_lru_lock ____cacheline_aligned_in_smp;
+	struct list_head	s_inode_lru;		/* unused inode lru */
+	int			s_nr_inodes_unused;	/* # of inodes on lru */
+
+	struct block_device	*s_bdev;
+	struct backing_dev_info *s_bdi;
+	struct mtd_info		*s_mtd;
+	struct hlist_node	s_instances;
+	struct quota_info	s_dquot;	/* Diskquota specific options */
+
+	int			s_frozen;
+	wait_queue_head_t	s_wait_unfrozen;
+
+	char s_id[32];				/* Informational name */
+	u8 s_uuid[16];				/* UUID */
+
+	void 			*s_fs_info;	/* Filesystem private info */
+	unsigned int		s_max_links;
+	fmode_t			s_mode;
+
+	/* Granularity of c/m/atime in ns.
+	   Cannot be worse than a second */
+	u32		   s_time_gran;
+
+	/*
+	 * The next field is for VFS *only*. No filesystems have any business
+	 * even looking at it. You had been warned.
+	 */
+	struct mutex s_vfs_rename_mutex;	/* Kludge */
+
+	/*
+	 * Filesystem subtype.  If non-empty the filesystem type field
+	 * in /proc/mounts will be "type.subtype"
+	 */
+	char *s_subtype;
+
+	/*
+	 * Saved mount options for lazy filesystems using
+	 * generic_show_options()
+	 */
+	char __rcu *s_options;
+	const struct dentry_operations *s_d_op; /* default d_op for dentries */
+
+	/*
+	 * Saved pool identifier for cleancache (-1 means none)
+	 */
+	int cleancache_poolid;
+
+	struct shrinker s_shrink;	/* per-sb shrinker handle */
+
+	/* Number of inodes with nlink == 0 but still referenced */
+	atomic_long_t s_remove_count;
+
+	/* Being remounted read-only */
+	int s_readonly_remount;
+};
+
+/* superblock cache pruning functions */
+extern void prune_icache_sb(struct super_block *sb, int nr_to_scan);
+extern void prune_dcache_sb(struct super_block *sb, int nr_to_scan);
+
+extern struct timespec current_fs_time(struct super_block *sb);
+
+/*
+ * Snapshotting support.
+ */
+enum {
+	SB_UNFROZEN = 0,
+	SB_FREEZE_WRITE	= 1,
+	SB_FREEZE_TRANS = 2,
+};
+
+#define vfs_check_frozen(sb, level) \
+	wait_event((sb)->s_wait_unfrozen, ((sb)->s_frozen < (level)))
+
+/*
+ * until VFS tracks user namespaces for inodes, just make all files
+ * belong to init_user_ns
+ */
+extern struct user_namespace init_user_ns;
+#define inode_userns(inode) (&init_user_ns)
+extern bool inode_owner_or_capable(const struct inode *inode);
+
+/* not quite ready to be deprecated, but... */
+extern void lock_super(struct super_block *);
+extern void unlock_super(struct super_block *);
+
+/*
+ * VFS helper functions..
+ */
+extern int vfs_create(struct inode *, struct dentry *, umode_t, struct nameidata *);
+extern int vfs_mkdir(struct inode *, struct dentry *, umode_t);
+extern int vfs_mknod(struct inode *, struct dentry *, umode_t, dev_t);
+extern int vfs_symlink(struct inode *, struct dentry *, const char *);
+extern int vfs_link(struct dentry *, struct inode *, struct dentry *);
+extern int vfs_rmdir(struct inode *, struct dentry *);
+extern int vfs_unlink(struct inode *, struct dentry *);
+extern int vfs_rename(struct inode *, struct dentry *, struct inode *, struct dentry *);
+
+/*
+ * VFS dentry helper functions.
+ */
+extern void dentry_unhash(struct dentry *dentry);
+
+/*
+ * VFS file helper functions.
+ */
+extern void inode_init_owner(struct inode *inode, const struct inode *dir,
+			umode_t mode);
+/*
+ * VFS FS_IOC_FIEMAP helper definitions.
+ */
+struct fiemap_extent_info {
+	unsigned int fi_flags;		/* Flags as passed from user */
+	unsigned int fi_extents_mapped;	/* Number of mapped extents */
+	unsigned int fi_extents_max;	/* Size of fiemap_extent array */
+	struct fiemap_extent __user *fi_extents_start; /* Start of
+							fiemap_extent array */
+};
+int fiemap_fill_next_extent(struct fiemap_extent_info *info, u64 logical,
+			    u64 phys, u64 len, u32 flags);
+int fiemap_check_flags(struct fiemap_extent_info *fieinfo, u32 fs_flags);
+
+/*
+ * File types
+ *
+ * NOTE! These match bits 12..15 of stat.st_mode
+ * (ie "(i_mode >> 12) & 15").
+ */
+#define DT_UNKNOWN	0
+#define DT_FIFO		1
+#define DT_CHR		2
+#define DT_DIR		4
+#define DT_BLK		6
+#define DT_REG		8
+#define DT_LNK		10
+#define DT_SOCK		12
+#define DT_WHT		14
+
+/*
+ * This is the "filldir" function type, used by readdir() to let
+ * the kernel specify what kind of dirent layout it wants to have.
+ * This allows the kernel to read directories into kernel space or
+ * to have different dirent layouts depending on the binary type.
+ */
+typedef int (*filldir_t)(void *, const char *, int, loff_t, u64, unsigned);
+struct block_device_operations;
+
+/* These macros are for out of kernel modules to test that
+ * the kernel supports the unlocked_ioctl and compat_ioctl
+ * fields in struct file_operations. */
+#define HAVE_COMPAT_IOCTL 1
+#define HAVE_UNLOCKED_IOCTL 1
+
+struct file_operations {
+	struct module *owner;
+	loff_t (*llseek) (struct file *, loff_t, int);
+	ssize_t (*read) (struct file *, char __user *, size_t, loff_t *);
+	ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *);
+	ssize_t (*aio_read) (struct kiocb *, const struct iovec *, unsigned long, loff_t);
+	ssize_t (*aio_write) (struct kiocb *, const struct iovec *, unsigned long, loff_t);
+	int (*readdir) (struct file *, void *, filldir_t);
+	unsigned int (*poll) (struct file *, struct poll_table_struct *);
+	long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
+	long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
+	int (*mmap) (struct file *, struct vm_area_struct *);
+	int (*open) (struct inode *, struct file *);
+	int (*flush) (struct file *, fl_owner_t id);
+	int (*release) (struct inode *, struct file *);
+	int (*fsync) (struct file *, loff_t, loff_t, int datasync);
+	int (*aio_fsync) (struct kiocb *, int datasync);
+	int (*fasync) (int, struct file *, int);
+	int (*lock) (struct file *, int, struct file_lock *);
+	ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int);
+	unsigned long (*get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long);
+	int (*check_flags)(int);
+	int (*flock) (struct file *, int, struct file_lock *);
+	ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, loff_t *, size_t, unsigned int);
+	ssize_t (*splice_read)(struct file *, loff_t *, struct pipe_inode_info *, size_t, unsigned int);
+	int (*setlease)(struct file *, long, struct file_lock **);
+	long (*fallocate)(struct file *file, int mode, loff_t offset,
+			  loff_t len);
+};
+
+struct inode_operations {
+	struct dentry * (*lookup) (struct inode *,struct dentry *, struct nameidata *);
+	void * (*follow_link) (struct dentry *, struct nameidata *);
+	int (*permission) (struct inode *, int);
+	struct posix_acl * (*get_acl)(struct inode *, int);
+
+	int (*readlink) (struct dentry *, char __user *,int);
+	void (*put_link) (struct dentry *, struct nameidata *, void *);
+
+	int (*create) (struct inode *,struct dentry *,umode_t,struct nameidata *);
+	int (*link) (struct dentry *,struct inode *,struct dentry *);
+	int (*unlink) (struct inode *,struct dentry *);
+	int (*symlink) (struct inode *,struct dentry *,const char *);
+	int (*mkdir) (struct inode *,struct dentry *,umode_t);
+	int (*rmdir) (struct inode *,struct dentry *);
+	int (*mknod) (struct inode *,struct dentry *,umode_t,dev_t);
+	int (*rename) (struct inode *, struct dentry *,
+			struct inode *, struct dentry *);
+	void (*truncate) (struct inode *);
+	int (*setattr) (struct dentry *, struct iattr *);
+	int (*getattr) (struct vfsmount *mnt, struct dentry *, struct kstat *);
+	int (*setxattr) (struct dentry *, const char *,const void *,size_t,int);
+	ssize_t (*getxattr) (struct dentry *, const char *, void *, size_t);
+	ssize_t (*listxattr) (struct dentry *, char *, size_t);
+	int (*removexattr) (struct dentry *, const char *);
+	void (*truncate_range)(struct inode *, loff_t, loff_t);
+	int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start,
+		      u64 len);
+} ____cacheline_aligned;
+
+struct seq_file;
+
+ssize_t rw_copy_check_uvector(int type, const struct iovec __user * uvector,
+			      unsigned long nr_segs, unsigned long fast_segs,
+			      struct iovec *fast_pointer,
+			      struct iovec **ret_pointer,
+			      int check_access);
+
+extern ssize_t vfs_read(struct file *, char __user *, size_t, loff_t *);
+extern ssize_t vfs_write(struct file *, const char __user *, size_t, loff_t *);
+extern ssize_t vfs_readv(struct file *, const struct iovec __user *,
+		unsigned long, loff_t *);
+extern ssize_t vfs_writev(struct file *, const struct iovec __user *,
+		unsigned long, loff_t *);
+
+struct super_operations {
+   	struct inode *(*alloc_inode)(struct super_block *sb);
+	void (*destroy_inode)(struct inode *);
+
+   	void (*dirty_inode) (struct inode *, int flags);
+	int (*write_inode) (struct inode *, struct writeback_control *wbc);
+	int (*drop_inode) (struct inode *);
+	void (*evict_inode) (struct inode *);
+	void (*put_super) (struct super_block *);
+	void (*write_super) (struct super_block *);
+	int (*sync_fs)(struct super_block *sb, int wait);
+	int (*freeze_fs) (struct super_block *);
+	int (*unfreeze_fs) (struct super_block *);
+	int (*statfs) (struct dentry *, struct kstatfs *);
+	int (*remount_fs) (struct super_block *, int *, char *);
+	void (*umount_begin) (struct super_block *);
+
+	int (*show_options)(struct seq_file *, struct dentry *);
+	int (*show_devname)(struct seq_file *, struct dentry *);
+	int (*show_path)(struct seq_file *, struct dentry *);
+	int (*show_stats)(struct seq_file *, struct dentry *);
+#ifdef CONFIG_QUOTA
+	ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t);
+	ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t);
+#endif
+	int (*bdev_try_to_free_page)(struct super_block*, struct page*, gfp_t);
+	int (*nr_cached_objects)(struct super_block *);
+	void (*free_cached_objects)(struct super_block *, int);
+};
+
+/*
+ * Inode state bits.  Protected by inode->i_lock
+ *
+ * Three bits determine the dirty state of the inode, I_DIRTY_SYNC,
+ * I_DIRTY_DATASYNC and I_DIRTY_PAGES.
+ *
+ * Four bits define the lifetime of an inode.  Initially, inodes are I_NEW,
+ * until that flag is cleared.  I_WILL_FREE, I_FREEING and I_CLEAR are set at
+ * various stages of removing an inode.
+ *
+ * Two bits are used for locking and completion notification, I_NEW and I_SYNC.
+ *
+ * I_DIRTY_SYNC		Inode is dirty, but doesn't have to be written on
+ *			fdatasync().  i_atime is the usual cause.
+ * I_DIRTY_DATASYNC	Data-related inode changes pending. We keep track of
+ *			these changes separately from I_DIRTY_SYNC so that we
+ *			don't have to write inode on fdatasync() when only
+ *			mtime has changed in it.
+ * I_DIRTY_PAGES	Inode has dirty pages.  Inode itself may be clean.
+ * I_NEW		Serves as both a mutex and completion notification.
+ *			New inodes set I_NEW.  If two processes both create
+ *			the same inode, one of them will release its inode and
+ *			wait for I_NEW to be released before returning.
+ *			Inodes in I_WILL_FREE, I_FREEING or I_CLEAR state can
+ *			also cause waiting on I_NEW, without I_NEW actually
+ *			being set.  find_inode() uses this to prevent returning
+ *			nearly-dead inodes.
+ * I_WILL_FREE		Must be set when calling write_inode_now() if i_count
+ *			is zero.  I_FREEING must be set when I_WILL_FREE is
+ *			cleared.
+ * I_FREEING		Set when inode is about to be freed but still has dirty
+ *			pages or buffers attached or the inode itself is still
+ *			dirty.
+ * I_CLEAR		Added by end_writeback().  In this state the inode is clean
+ *			and can be destroyed.  Inode keeps I_FREEING.
+ *
+ *			Inodes that are I_WILL_FREE, I_FREEING or I_CLEAR are
+ *			prohibited for many purposes.  iget() must wait for
+ *			the inode to be completely released, then create it
+ *			anew.  Other functions will just ignore such inodes,
+ *			if appropriate.  I_NEW is used for waiting.
+ *
+ * I_SYNC		Synchonized write of dirty inode data.  The bits is
+ *			set during data writeback, and cleared with a wakeup
+ *			on the bit address once it is done.
+ *
+ * I_REFERENCED		Marks the inode as recently references on the LRU list.
+ *
+ * I_DIO_WAKEUP		Never set.  Only used as a key for wait_on_bit().
+ *
+ * Q: What is the difference between I_WILL_FREE and I_FREEING?
+ */
+#define I_DIRTY_SYNC		(1 << 0)
+#define I_DIRTY_DATASYNC	(1 << 1)
+#define I_DIRTY_PAGES		(1 << 2)
+#define __I_NEW			3
+#define I_NEW			(1 << __I_NEW)
+#define I_WILL_FREE		(1 << 4)
+#define I_FREEING		(1 << 5)
+#define I_CLEAR			(1 << 6)
+#define __I_SYNC		7
+#define I_SYNC			(1 << __I_SYNC)
+#define I_REFERENCED		(1 << 8)
+#define __I_DIO_WAKEUP		9
+#define I_DIO_WAKEUP		(1 << I_DIO_WAKEUP)
+
+#define I_DIRTY (I_DIRTY_SYNC | I_DIRTY_DATASYNC | I_DIRTY_PAGES)
+
+extern void __mark_inode_dirty(struct inode *, int);
+static inline void mark_inode_dirty(struct inode *inode)
+{
+	__mark_inode_dirty(inode, I_DIRTY);
+}
+
+static inline void mark_inode_dirty_sync(struct inode *inode)
+{
+	__mark_inode_dirty(inode, I_DIRTY_SYNC);
+}
+
+extern void inc_nlink(struct inode *inode);
+extern void drop_nlink(struct inode *inode);
+extern void clear_nlink(struct inode *inode);
+extern void set_nlink(struct inode *inode, unsigned int nlink);
+
+static inline void inode_inc_link_count(struct inode *inode)
+{
+	inc_nlink(inode);
+	mark_inode_dirty(inode);
+}
+
+static inline void inode_dec_link_count(struct inode *inode)
+{
+	drop_nlink(inode);
+	mark_inode_dirty(inode);
+}
+
+/**
+ * inode_inc_iversion - increments i_version
+ * @inode: inode that need to be updated
+ *
+ * Every time the inode is modified, the i_version field will be incremented.
+ * The filesystem has to be mounted with i_version flag
+ */
+
+static inline void inode_inc_iversion(struct inode *inode)
+{
+       spin_lock(&inode->i_lock);
+       inode->i_version++;
+       spin_unlock(&inode->i_lock);
+}
+
+extern void touch_atime(struct path *);
+static inline void file_accessed(struct file *file)
+{
+	if (!(file->f_flags & O_NOATIME))
+		touch_atime(&file->f_path);
+}
+
+int sync_inode(struct inode *inode, struct writeback_control *wbc);
+int sync_inode_metadata(struct inode *inode, int wait);
+
+struct file_system_type {
+	const char *name;
+	int fs_flags;
+	struct dentry *(*mount) (struct file_system_type *, int,
+		       const char *, void *);
+	void (*kill_sb) (struct super_block *);
+	struct module *owner;
+	struct file_system_type * next;
+	struct hlist_head fs_supers;
+
+	struct lock_class_key s_lock_key;
+	struct lock_class_key s_umount_key;
+	struct lock_class_key s_vfs_rename_key;
+
+	struct lock_class_key i_lock_key;
+	struct lock_class_key i_mutex_key;
+	struct lock_class_key i_mutex_dir_key;
+};
+
+extern struct dentry *mount_ns(struct file_system_type *fs_type, int flags,
+	void *data, int (*fill_super)(struct super_block *, void *, int));
+extern struct dentry *mount_bdev(struct file_system_type *fs_type,
+	int flags, const char *dev_name, void *data,
+	int (*fill_super)(struct super_block *, void *, int));
+extern struct dentry *mount_single(struct file_system_type *fs_type,
+	int flags, void *data,
+	int (*fill_super)(struct super_block *, void *, int));
+extern struct dentry *mount_nodev(struct file_system_type *fs_type,
+	int flags, void *data,
+	int (*fill_super)(struct super_block *, void *, int));
+extern struct dentry *mount_subtree(struct vfsmount *mnt, const char *path);
+void generic_shutdown_super(struct super_block *sb);
+void kill_block_super(struct super_block *sb);
+void kill_anon_super(struct super_block *sb);
+void kill_litter_super(struct super_block *sb);
+void deactivate_super(struct super_block *sb);
+void deactivate_locked_super(struct super_block *sb);
+int set_anon_super(struct super_block *s, void *data);
+int get_anon_bdev(dev_t *);
+void free_anon_bdev(dev_t);
+struct super_block *sget(struct file_system_type *type,
+			int (*test)(struct super_block *,void *),
+			int (*set)(struct super_block *,void *),
+			void *data);
+extern struct dentry *mount_pseudo(struct file_system_type *, char *,
+	const struct super_operations *ops,
+	const struct dentry_operations *dops,
+	unsigned long);
+
+/* Alas, no aliases. Too much hassle with bringing module.h everywhere */
+#define fops_get(fops) \
+	(((fops) && try_module_get((fops)->owner) ? (fops) : NULL))
+#define fops_put(fops) \
+	do { if (fops) module_put((fops)->owner); } while(0)
+
+extern int register_filesystem(struct file_system_type *);
+extern int unregister_filesystem(struct file_system_type *);
+extern struct vfsmount *kern_mount_data(struct file_system_type *, void *data);
+#define kern_mount(type) kern_mount_data(type, NULL)
+extern void kern_unmount(struct vfsmount *mnt);
+extern int may_umount_tree(struct vfsmount *);
+extern int may_umount(struct vfsmount *);
+extern long do_mount(char *, char *, char *, unsigned long, void *);
+extern struct vfsmount *collect_mounts(struct path *);
+extern void drop_collected_mounts(struct vfsmount *);
+extern int iterate_mounts(int (*)(struct vfsmount *, void *), void *,
+			  struct vfsmount *);
+extern int vfs_statfs(struct path *, struct kstatfs *);
+extern int user_statfs(const char __user *, struct kstatfs *);
+extern int fd_statfs(int, struct kstatfs *);
+extern int vfs_ustat(dev_t, struct kstatfs *);
+extern int freeze_super(struct super_block *super);
+extern int thaw_super(struct super_block *super);
+extern bool our_mnt(struct vfsmount *mnt);
+
+extern int current_umask(void);
+
+/* /sys/fs */
+extern struct kobject *fs_kobj;
+
+#define MAX_RW_COUNT (INT_MAX & PAGE_CACHE_MASK)
+extern int rw_verify_area(int, struct file *, loff_t *, size_t);
+
+#define FLOCK_VERIFY_READ  1
+#define FLOCK_VERIFY_WRITE 2
+
+#ifdef CONFIG_FILE_LOCKING
+extern int locks_mandatory_locked(struct inode *);
+extern int locks_mandatory_area(int, struct inode *, struct file *, loff_t, size_t);
+
+/*
+ * Candidates for mandatory locking have the setgid bit set
+ * but no group execute bit -  an otherwise meaningless combination.
+ */
+
+static inline int __mandatory_lock(struct inode *ino)
+{
+	return (ino->i_mode & (S_ISGID | S_IXGRP)) == S_ISGID;
+}
+
+/*
+ * ... and these candidates should be on MS_MANDLOCK mounted fs,
+ * otherwise these will be advisory locks
+ */
+
+static inline int mandatory_lock(struct inode *ino)
+{
+	return IS_MANDLOCK(ino) && __mandatory_lock(ino);
+}
+
+static inline int locks_verify_locked(struct inode *inode)
+{
+	if (mandatory_lock(inode))
+		return locks_mandatory_locked(inode);
+	return 0;
+}
+
+static inline int locks_verify_truncate(struct inode *inode,
+				    struct file *filp,
+				    loff_t size)
+{
+	if (inode->i_flock && mandatory_lock(inode))
+		return locks_mandatory_area(
+			FLOCK_VERIFY_WRITE, inode, filp,
+			size < inode->i_size ? size : inode->i_size,
+			(size < inode->i_size ? inode->i_size - size
+			 : size - inode->i_size)
+		);
+	return 0;
+}
+
+static inline int break_lease(struct inode *inode, unsigned int mode)
+{
+	if (inode->i_flock)
+		return __break_lease(inode, mode);
+	return 0;
+}
+#else /* !CONFIG_FILE_LOCKING */
+static inline int locks_mandatory_locked(struct inode *inode)
+{
+	return 0;
+}
+
+static inline int locks_mandatory_area(int rw, struct inode *inode,
+				       struct file *filp, loff_t offset,
+				       size_t count)
+{
+	return 0;
+}
+
+static inline int __mandatory_lock(struct inode *inode)
+{
+	return 0;
+}
+
+static inline int mandatory_lock(struct inode *inode)
+{
+	return 0;
+}
+
+static inline int locks_verify_locked(struct inode *inode)
+{
+	return 0;
+}
+
+static inline int locks_verify_truncate(struct inode *inode, struct file *filp,
+					size_t size)
+{
+	return 0;
+}
+
+static inline int break_lease(struct inode *inode, unsigned int mode)
+{
+	return 0;
+}
+
+#endif /* CONFIG_FILE_LOCKING */
+
+/* fs/open.c */
+
+extern int do_truncate(struct dentry *, loff_t start, unsigned int time_attrs,
+		       struct file *filp);
+extern int do_fallocate(struct file *file, int mode, loff_t offset,
+			loff_t len);
+extern long do_sys_open(int dfd, const char __user *filename, int flags,
+			umode_t mode);
+extern struct file *filp_open(const char *, int, umode_t);
+extern struct file *file_open_root(struct dentry *, struct vfsmount *,
+				   const char *, int);
+extern struct file * dentry_open(struct dentry *, struct vfsmount *, int,
+				 const struct cred *);
+extern int filp_close(struct file *, fl_owner_t id);
+extern char * getname(const char __user *);
+
+/* fs/ioctl.c */
+
+extern int ioctl_preallocate(struct file *filp, void __user *argp);
+
+/* fs/dcache.c */
+extern void __init vfs_caches_init_early(void);
+extern void __init vfs_caches_init(unsigned long);
+
+extern struct kmem_cache *names_cachep;
+
+#define __getname_gfp(gfp)	kmem_cache_alloc(names_cachep, (gfp))
+#define __getname()		__getname_gfp(GFP_KERNEL)
+#define __putname(name)		kmem_cache_free(names_cachep, (void *)(name))
+#ifndef CONFIG_AUDITSYSCALL
+#define putname(name)   __putname(name)
+#else
+extern void putname(const char *name);
+#endif
+
+#ifdef CONFIG_BLOCK
+extern int register_blkdev(unsigned int, const char *);
+extern void unregister_blkdev(unsigned int, const char *);
+extern struct block_device *bdget(dev_t);
+extern struct block_device *bdgrab(struct block_device *bdev);
+extern void bd_set_size(struct block_device *, loff_t size);
+extern sector_t blkdev_max_block(struct block_device *bdev);
+extern void bd_forget(struct inode *inode);
+extern void bdput(struct block_device *);
+extern void invalidate_bdev(struct block_device *);
+extern int sync_blockdev(struct block_device *bdev);
+extern void kill_bdev(struct block_device *);
+extern struct super_block *freeze_bdev(struct block_device *);
+extern void emergency_thaw_all(void);
+extern int thaw_bdev(struct block_device *bdev, struct super_block *sb);
+extern int fsync_bdev(struct block_device *);
+#else
+static inline void bd_forget(struct inode *inode) {}
+static inline int sync_blockdev(struct block_device *bdev) { return 0; }
+static inline void kill_bdev(struct block_device *bdev) {}
+static inline void invalidate_bdev(struct block_device *bdev) {}
+
+static inline struct super_block *freeze_bdev(struct block_device *sb)
+{
+	return NULL;
+}
+
+static inline int thaw_bdev(struct block_device *bdev, struct super_block *sb)
+{
+	return 0;
+}
+#endif
+extern int sync_filesystem(struct super_block *);
+extern const struct file_operations def_blk_fops;
+extern const struct file_operations def_chr_fops;
+extern const struct file_operations bad_sock_fops;
+extern const struct file_operations def_fifo_fops;
+#ifdef CONFIG_BLOCK
+extern int ioctl_by_bdev(struct block_device *, unsigned, unsigned long);
+extern int blkdev_ioctl(struct block_device *, fmode_t, unsigned, unsigned long);
+extern long compat_blkdev_ioctl(struct file *, unsigned, unsigned long);
+extern int blkdev_get(struct block_device *bdev, fmode_t mode, void *holder);
+extern struct block_device *blkdev_get_by_path(const char *path, fmode_t mode,
+					       void *holder);
+extern struct block_device *blkdev_get_by_dev(dev_t dev, fmode_t mode,
+					      void *holder);
+extern int blkdev_put(struct block_device *bdev, fmode_t mode);
+#ifdef CONFIG_SYSFS
+extern int bd_link_disk_holder(struct block_device *bdev, struct gendisk *disk);
+extern void bd_unlink_disk_holder(struct block_device *bdev,
+				  struct gendisk *disk);
+#else
+static inline int bd_link_disk_holder(struct block_device *bdev,
+				      struct gendisk *disk)
+{
+	return 0;
+}
+static inline void bd_unlink_disk_holder(struct block_device *bdev,
+					 struct gendisk *disk)
+{
+}
+#endif
+#endif
+
+/* fs/char_dev.c */
+#define CHRDEV_MAJOR_HASH_SIZE	255
+extern int alloc_chrdev_region(dev_t *, unsigned, unsigned, const char *);
+extern int register_chrdev_region(dev_t, unsigned, const char *);
+extern int __register_chrdev(unsigned int major, unsigned int baseminor,
+			     unsigned int count, const char *name,
+			     const struct file_operations *fops);
+extern void __unregister_chrdev(unsigned int major, unsigned int baseminor,
+				unsigned int count, const char *name);
+extern void unregister_chrdev_region(dev_t, unsigned);
+extern void chrdev_show(struct seq_file *,off_t);
+
+static inline int register_chrdev(unsigned int major, const char *name,
+				  const struct file_operations *fops)
+{
+	return __register_chrdev(major, 0, 256, name, fops);
+}
+
+static inline void unregister_chrdev(unsigned int major, const char *name)
+{
+	__unregister_chrdev(major, 0, 256, name);
+}
+
+/* fs/block_dev.c */
+#define BDEVNAME_SIZE	32	/* Largest string for a blockdev identifier */
+#define BDEVT_SIZE	10	/* Largest string for MAJ:MIN for blkdev */
+
+#ifdef CONFIG_BLOCK
+#define BLKDEV_MAJOR_HASH_SIZE	255
+extern const char *__bdevname(dev_t, char *buffer);
+extern const char *bdevname(struct block_device *bdev, char *buffer);
+extern struct block_device *lookup_bdev(const char *);
+extern void blkdev_show(struct seq_file *,off_t);
+
+#else
+#define BLKDEV_MAJOR_HASH_SIZE	0
+#endif
+
+extern void init_special_inode(struct inode *, umode_t, dev_t);
+
+/* Invalid inode operations -- fs/bad_inode.c */
+extern void make_bad_inode(struct inode *);
+extern int is_bad_inode(struct inode *);
+
+extern const struct file_operations read_pipefifo_fops;
+extern const struct file_operations write_pipefifo_fops;
+extern const struct file_operations rdwr_pipefifo_fops;
+
+#ifdef CONFIG_BLOCK
+/*
+ * return READ, READA, or WRITE
+ */
+#define bio_rw(bio)		((bio)->bi_rw & (RW_MASK | RWA_MASK))
+
+/*
+ * return data direction, READ or WRITE
+ */
+#define bio_data_dir(bio)	((bio)->bi_rw & 1)
+
+extern void check_disk_size_change(struct gendisk *disk,
+				   struct block_device *bdev);
+extern int revalidate_disk(struct gendisk *);
+extern int check_disk_change(struct block_device *);
+extern int __invalidate_device(struct block_device *, bool);
+extern int invalidate_partition(struct gendisk *, int);
+#endif
+unsigned long invalidate_mapping_pages(struct address_space *mapping,
+					pgoff_t start, pgoff_t end);
+
+static inline void invalidate_remote_inode(struct inode *inode)
+{
+	if (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
+	    S_ISLNK(inode->i_mode))
+		invalidate_mapping_pages(inode->i_mapping, 0, -1);
+}
+extern int invalidate_inode_pages2(struct address_space *mapping);
+extern int invalidate_inode_pages2_range(struct address_space *mapping,
+					 pgoff_t start, pgoff_t end);
+extern int write_inode_now(struct inode *, int);
+extern int filemap_fdatawrite(struct address_space *);
+extern int filemap_flush(struct address_space *);
+extern int filemap_fdatawait(struct address_space *);
+extern int filemap_fdatawait_range(struct address_space *, loff_t lstart,
+				   loff_t lend);
+extern int filemap_write_and_wait(struct address_space *mapping);
+extern int filemap_write_and_wait_range(struct address_space *mapping,
+				        loff_t lstart, loff_t lend);
+extern int __filemap_fdatawrite_range(struct address_space *mapping,
+				loff_t start, loff_t end, int sync_mode);
+extern int filemap_fdatawrite_range(struct address_space *mapping,
+				loff_t start, loff_t end);
+
+extern int vfs_fsync_range(struct file *file, loff_t start, loff_t end,
+			   int datasync);
+extern int vfs_fsync(struct file *file, int datasync);
+extern int generic_write_sync(struct file *file, loff_t pos, loff_t count);
+extern void sync_supers(void);
+extern void emergency_sync(void);
+extern void emergency_remount(void);
+#ifdef CONFIG_BLOCK
+extern sector_t bmap(struct inode *, sector_t);
+#endif
+extern int notify_change(struct dentry *, struct iattr *);
+extern int inode_permission(struct inode *, int);
+extern int generic_permission(struct inode *, int);
+
+static inline bool execute_ok(struct inode *inode)
+{
+	return (inode->i_mode & S_IXUGO) || S_ISDIR(inode->i_mode);
+}
+
+/*
+ * get_write_access() gets write permission for a file.
+ * put_write_access() releases this write permission.
+ * This is used for regular files.
+ * We cannot support write (and maybe mmap read-write shared) accesses and
+ * MAP_DENYWRITE mmappings simultaneously. The i_writecount field of an inode
+ * can have the following values:
+ * 0: no writers, no VM_DENYWRITE mappings
+ * < 0: (-i_writecount) vm_area_structs with VM_DENYWRITE set exist
+ * > 0: (i_writecount) users are writing to the file.
+ *
+ * Normally we operate on that counter with atomic_{inc,dec} and it's safe
+ * except for the cases where we don't hold i_writecount yet. Then we need to
+ * use {get,deny}_write_access() - these functions check the sign and refuse
+ * to do the change if sign is wrong.
+ */
+static inline int get_write_access(struct inode *inode)
+{
+	return atomic_inc_unless_negative(&inode->i_writecount) ? 0 : -ETXTBSY;
+}
+static inline int deny_write_access(struct file *file)
+{
+	struct inode *inode = file->f_path.dentry->d_inode;
+	return atomic_dec_unless_positive(&inode->i_writecount) ? 0 : -ETXTBSY;
+}
+static inline void put_write_access(struct inode * inode)
+{
+	atomic_dec(&inode->i_writecount);
+}
+static inline void allow_write_access(struct file *file)
+{
+	if (file)
+		atomic_inc(&file->f_path.dentry->d_inode->i_writecount);
+}
+#ifdef CONFIG_IMA
+static inline void i_readcount_dec(struct inode *inode)
+{
+	BUG_ON(!atomic_read(&inode->i_readcount));
+	atomic_dec(&inode->i_readcount);
+}
+static inline void i_readcount_inc(struct inode *inode)
+{
+	atomic_inc(&inode->i_readcount);
+}
+#else
+static inline void i_readcount_dec(struct inode *inode)
+{
+	return;
+}
+static inline void i_readcount_inc(struct inode *inode)
+{
+	return;
+}
+#endif
+extern int do_pipe_flags(int *, int);
+extern struct file *create_read_pipe(struct file *f, int flags);
+extern struct file *create_write_pipe(int flags);
+extern void free_write_pipe(struct file *);
+
+extern int kernel_read(struct file *, loff_t, char *, unsigned long);
+extern struct file * open_exec(const char *);
+ 
+/* fs/dcache.c -- generic fs support functions */
+extern int is_subdir(struct dentry *, struct dentry *);
+extern int path_is_under(struct path *, struct path *);
+extern ino_t find_inode_number(struct dentry *, struct qstr *);
+
+#include <linux/err.h>
+
+/* needed for stackable file system support */
+extern loff_t default_llseek(struct file *file, loff_t offset, int origin);
+
+extern loff_t vfs_llseek(struct file *file, loff_t offset, int origin);
+
+extern int inode_init_always(struct super_block *, struct inode *);
+extern void inode_init_once(struct inode *);
+extern void address_space_init_once(struct address_space *mapping);
+extern void ihold(struct inode * inode);
+extern void iput(struct inode *);
+extern struct inode * igrab(struct inode *);
+extern ino_t iunique(struct super_block *, ino_t);
+extern int inode_needs_sync(struct inode *inode);
+extern int generic_delete_inode(struct inode *inode);
+static inline int generic_drop_inode(struct inode *inode)
+{
+	return !inode->i_nlink || inode_unhashed(inode);
+}
+
+extern struct inode *ilookup5_nowait(struct super_block *sb,
+		unsigned long hashval, int (*test)(struct inode *, void *),
+		void *data);
+extern struct inode *ilookup5(struct super_block *sb, unsigned long hashval,
+		int (*test)(struct inode *, void *), void *data);
+extern struct inode *ilookup(struct super_block *sb, unsigned long ino);
+
+extern struct inode * iget5_locked(struct super_block *, unsigned long, int (*test)(struct inode *, void *), int (*set)(struct inode *, void *), void *);
+extern struct inode * iget_locked(struct super_block *, unsigned long);
+extern int insert_inode_locked4(struct inode *, unsigned long, int (*test)(struct inode *, void *), void *);
+extern int insert_inode_locked(struct inode *);
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+extern void lockdep_annotate_inode_mutex_key(struct inode *inode);
+#else
+static inline void lockdep_annotate_inode_mutex_key(struct inode *inode) { };
+#endif
+extern void unlock_new_inode(struct inode *);
+extern unsigned int get_next_ino(void);
+
+extern void __iget(struct inode * inode);
+extern void iget_failed(struct inode *);
+extern void end_writeback(struct inode *);
+extern void __destroy_inode(struct inode *);
+extern struct inode *new_inode_pseudo(struct super_block *sb);
+extern struct inode *new_inode(struct super_block *sb);
+extern void free_inode_nonrcu(struct inode *inode);
+extern int should_remove_suid(struct dentry *);
+extern int file_remove_suid(struct file *);
+
+extern void __insert_inode_hash(struct inode *, unsigned long hashval);
+static inline void insert_inode_hash(struct inode *inode)
+{
+	__insert_inode_hash(inode, inode->i_ino);
+}
+
+extern void __remove_inode_hash(struct inode *);
+static inline void remove_inode_hash(struct inode *inode)
+{
+	if (!inode_unhashed(inode))
+		__remove_inode_hash(inode);
+}
+
+extern void inode_sb_list_add(struct inode *inode);
+
+#ifdef CONFIG_BLOCK
+extern void submit_bio(int, struct bio *);
+extern int bdev_read_only(struct block_device *);
+#endif
+extern int set_blocksize(struct block_device *, int);
+extern int sb_set_blocksize(struct super_block *, int);
+extern int sb_min_blocksize(struct super_block *, int);
+
+extern int generic_file_mmap(struct file *, struct vm_area_struct *);
+extern int generic_file_readonly_mmap(struct file *, struct vm_area_struct *);
+extern int file_read_actor(read_descriptor_t * desc, struct page *page, unsigned long offset, unsigned long size);
+int generic_write_checks(struct file *file, loff_t *pos, size_t *count, int isblk);
+extern ssize_t generic_file_aio_read(struct kiocb *, const struct iovec *, unsigned long, loff_t);
+extern ssize_t __generic_file_aio_write(struct kiocb *, const struct iovec *, unsigned long,
+		loff_t *);
+extern ssize_t generic_file_aio_write(struct kiocb *, const struct iovec *, unsigned long, loff_t);
+extern ssize_t generic_file_direct_write(struct kiocb *, const struct iovec *,
+		unsigned long *, loff_t, loff_t *, size_t, size_t);
+extern ssize_t generic_file_buffered_write(struct kiocb *, const struct iovec *,
+		unsigned long, loff_t, loff_t *, size_t, ssize_t);
+extern ssize_t do_sync_read(struct file *filp, char __user *buf, size_t len, loff_t *ppos);
+extern ssize_t do_sync_write(struct file *filp, const char __user *buf, size_t len, loff_t *ppos);
+extern int generic_segment_checks(const struct iovec *iov,
+		unsigned long *nr_segs, size_t *count, int access_flags);
+
+/* fs/block_dev.c */
+extern ssize_t blkdev_aio_write(struct kiocb *iocb, const struct iovec *iov,
+				unsigned long nr_segs, loff_t pos);
+extern int blkdev_fsync(struct file *filp, loff_t start, loff_t end,
+			int datasync);
+extern void block_sync_page(struct page *page);
+
+/* fs/splice.c */
+extern ssize_t generic_file_splice_read(struct file *, loff_t *,
+		struct pipe_inode_info *, size_t, unsigned int);
+extern ssize_t default_file_splice_read(struct file *, loff_t *,
+		struct pipe_inode_info *, size_t, unsigned int);
+extern ssize_t generic_file_splice_write(struct pipe_inode_info *,
+		struct file *, loff_t *, size_t, unsigned int);
+extern ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe,
+		struct file *out, loff_t *, size_t len, unsigned int flags);
+extern long do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
+		size_t len, unsigned int flags);
+
+extern void
+file_ra_state_init(struct file_ra_state *ra, struct address_space *mapping);
+extern loff_t noop_llseek(struct file *file, loff_t offset, int origin);
+extern loff_t no_llseek(struct file *file, loff_t offset, int origin);
+extern loff_t generic_file_llseek(struct file *file, loff_t offset, int origin);
+extern loff_t generic_file_llseek_size(struct file *file, loff_t offset,
+		int origin, loff_t maxsize);
+extern int generic_file_open(struct inode * inode, struct file * filp);
+extern int nonseekable_open(struct inode * inode, struct file * filp);
+
+#ifdef CONFIG_FS_XIP
+extern ssize_t xip_file_read(struct file *filp, char __user *buf, size_t len,
+			     loff_t *ppos);
+extern int xip_file_mmap(struct file * file, struct vm_area_struct * vma);
+extern ssize_t xip_file_write(struct file *filp, const char __user *buf,
+			      size_t len, loff_t *ppos);
+extern int xip_truncate_page(struct address_space *mapping, loff_t from);
+#else
+static inline int xip_truncate_page(struct address_space *mapping, loff_t from)
+{
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_BLOCK
+typedef void (dio_submit_t)(int rw, struct bio *bio, struct inode *inode,
+			    loff_t file_offset);
+
+enum {
+	/* need locking between buffered and direct access */
+	DIO_LOCKING	= 0x01,
+
+	/* filesystem does not support filling holes */
+	DIO_SKIP_HOLES	= 0x02,
+};
+
+void dio_end_io(struct bio *bio, int error);
+void inode_dio_wait(struct inode *inode);
+void inode_dio_done(struct inode *inode);
+
+ssize_t __blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode,
+	struct block_device *bdev, const struct iovec *iov, loff_t offset,
+	unsigned long nr_segs, get_block_t get_block, dio_iodone_t end_io,
+	dio_submit_t submit_io,	int flags);
+
+static inline ssize_t blockdev_direct_IO(int rw, struct kiocb *iocb,
+		struct inode *inode, const struct iovec *iov, loff_t offset,
+		unsigned long nr_segs, get_block_t get_block)
+{
+	return __blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
+				    offset, nr_segs, get_block, NULL, NULL,
+				    DIO_LOCKING | DIO_SKIP_HOLES);
+}
+#else
+static inline void inode_dio_wait(struct inode *inode)
+{
+}
+#endif
+
+extern const struct file_operations generic_ro_fops;
+
+#define special_file(m) (S_ISCHR(m)||S_ISBLK(m)||S_ISFIFO(m)||S_ISSOCK(m))
+
+extern int vfs_readlink(struct dentry *, char __user *, int, const char *);
+extern int vfs_follow_link(struct nameidata *, const char *);
+extern int page_readlink(struct dentry *, char __user *, int);
+extern void *page_follow_link_light(struct dentry *, struct nameidata *);
+extern void page_put_link(struct dentry *, struct nameidata *, void *);
+extern int __page_symlink(struct inode *inode, const char *symname, int len,
+		int nofs);
+extern int page_symlink(struct inode *inode, const char *symname, int len);
+extern const struct inode_operations page_symlink_inode_operations;
+extern int generic_readlink(struct dentry *, char __user *, int);
+extern void generic_fillattr(struct inode *, struct kstat *);
+extern int vfs_getattr(struct vfsmount *, struct dentry *, struct kstat *);
+void __inode_add_bytes(struct inode *inode, loff_t bytes);
+void inode_add_bytes(struct inode *inode, loff_t bytes);
+void inode_sub_bytes(struct inode *inode, loff_t bytes);
+loff_t inode_get_bytes(struct inode *inode);
+void inode_set_bytes(struct inode *inode, loff_t bytes);
+
+extern int vfs_readdir(struct file *, filldir_t, void *);
+
+extern int vfs_stat(const char __user *, struct kstat *);
+extern int vfs_lstat(const char __user *, struct kstat *);
+extern int vfs_fstat(unsigned int, struct kstat *);
+extern int vfs_fstatat(int , const char __user *, struct kstat *, int);
+
+extern int do_vfs_ioctl(struct file *filp, unsigned int fd, unsigned int cmd,
+		    unsigned long arg);
+extern int __generic_block_fiemap(struct inode *inode,
+				  struct fiemap_extent_info *fieinfo,
+				  loff_t start, loff_t len,
+				  get_block_t *get_block);
+extern int generic_block_fiemap(struct inode *inode,
+				struct fiemap_extent_info *fieinfo, u64 start,
+				u64 len, get_block_t *get_block);
+
+extern void get_filesystem(struct file_system_type *fs);
+extern void put_filesystem(struct file_system_type *fs);
+extern struct file_system_type *get_fs_type(const char *name);
+extern struct super_block *get_super(struct block_device *);
+extern struct super_block *get_super_thawed(struct block_device *);
+extern struct super_block *get_active_super(struct block_device *bdev);
+extern void drop_super(struct super_block *sb);
+extern void iterate_supers(void (*)(struct super_block *, void *), void *);
+extern void iterate_supers_type(struct file_system_type *,
+			        void (*)(struct super_block *, void *), void *);
+
+extern int dcache_dir_open(struct inode *, struct file *);
+extern int dcache_dir_close(struct inode *, struct file *);
+extern loff_t dcache_dir_lseek(struct file *, loff_t, int);
+extern int dcache_readdir(struct file *, void *, filldir_t);
+extern int simple_setattr(struct dentry *, struct iattr *);
+extern int simple_getattr(struct vfsmount *, struct dentry *, struct kstat *);
+extern int simple_statfs(struct dentry *, struct kstatfs *);
+extern int simple_open(struct inode *inode, struct file *file);
+extern int simple_link(struct dentry *, struct inode *, struct dentry *);
+extern int simple_unlink(struct inode *, struct dentry *);
+extern int simple_rmdir(struct inode *, struct dentry *);
+extern int simple_rename(struct inode *, struct dentry *, struct inode *, struct dentry *);
+extern int noop_fsync(struct file *, loff_t, loff_t, int);
+extern int simple_empty(struct dentry *);
+extern int simple_readpage(struct file *file, struct page *page);
+extern int simple_write_begin(struct file *file, struct address_space *mapping,
+			loff_t pos, unsigned len, unsigned flags,
+			struct page **pagep, void **fsdata);
+extern int simple_write_end(struct file *file, struct address_space *mapping,
+			loff_t pos, unsigned len, unsigned copied,
+			struct page *page, void *fsdata);
+
+extern struct dentry *simple_lookup(struct inode *, struct dentry *, struct nameidata *);
+extern ssize_t generic_read_dir(struct file *, char __user *, size_t, loff_t *);
+extern const struct file_operations simple_dir_operations;
+extern const struct inode_operations simple_dir_inode_operations;
+struct tree_descr { char *name; const struct file_operations *ops; int mode; };
+struct dentry *d_alloc_name(struct dentry *, const char *);
+extern int simple_fill_super(struct super_block *, unsigned long, struct tree_descr *);
+extern int simple_pin_fs(struct file_system_type *, struct vfsmount **mount, int *count);
+extern void simple_release_fs(struct vfsmount **mount, int *count);
+
+extern ssize_t simple_read_from_buffer(void __user *to, size_t count,
+			loff_t *ppos, const void *from, size_t available);
+extern ssize_t simple_write_to_buffer(void *to, size_t available, loff_t *ppos,
+		const void __user *from, size_t count);
+
+extern int generic_file_fsync(struct file *, loff_t, loff_t, int);
+
+extern int generic_check_addressable(unsigned, u64);
+
+#ifdef CONFIG_MIGRATION
+extern int buffer_migrate_page(struct address_space *,
+				struct page *, struct page *,
+				enum migrate_mode);
+#else
+#define buffer_migrate_page NULL
+#endif
+
+extern int inode_change_ok(const struct inode *, struct iattr *);
+extern int inode_newsize_ok(const struct inode *, loff_t offset);
+extern void setattr_copy(struct inode *inode, const struct iattr *attr);
+
+extern void file_update_time(struct file *file);
+
+extern int generic_show_options(struct seq_file *m, struct dentry *root);
+extern void save_mount_options(struct super_block *sb, char *options);
+extern void replace_mount_options(struct super_block *sb, char *options);
+
+static inline ino_t parent_ino(struct dentry *dentry)
+{
+	ino_t res;
+
+	/*
+	 * Don't strictly need d_lock here? If the parent ino could change
+	 * then surely we'd have a deeper race in the caller?
+	 */
+	spin_lock(&dentry->d_lock);
+	res = dentry->d_parent->d_inode->i_ino;
+	spin_unlock(&dentry->d_lock);
+	return res;
+}
+
+/* Transaction based IO helpers */
+
+/*
+ * An argresp is stored in an allocated page and holds the
+ * size of the argument or response, along with its content
+ */
+struct simple_transaction_argresp {
+	ssize_t size;
+	char data[0];
+};
+
+#define SIMPLE_TRANSACTION_LIMIT (PAGE_SIZE - sizeof(struct simple_transaction_argresp))
+
+char *simple_transaction_get(struct file *file, const char __user *buf,
+				size_t size);
+ssize_t simple_transaction_read(struct file *file, char __user *buf,
+				size_t size, loff_t *pos);
+int simple_transaction_release(struct inode *inode, struct file *file);
+
+void simple_transaction_set(struct file *file, size_t n);
+
+/*
+ * simple attribute files
+ *
+ * These attributes behave similar to those in sysfs:
+ *
+ * Writing to an attribute immediately sets a value, an open file can be
+ * written to multiple times.
+ *
+ * Reading from an attribute creates a buffer from the value that might get
+ * read with multiple read calls. When the attribute has been read
+ * completely, no further read calls are possible until the file is opened
+ * again.
+ *
+ * All attributes contain a text representation of a numeric value
+ * that are accessed with the get() and set() functions.
+ */
+#define DEFINE_SIMPLE_ATTRIBUTE(__fops, __get, __set, __fmt)		\
+static int __fops ## _open(struct inode *inode, struct file *file)	\
+{									\
+	__simple_attr_check_format(__fmt, 0ull);			\
+	return simple_attr_open(inode, file, __get, __set, __fmt);	\
+}									\
+static const struct file_operations __fops = {				\
+	.owner	 = THIS_MODULE,						\
+	.open	 = __fops ## _open,					\
+	.release = simple_attr_release,					\
+	.read	 = simple_attr_read,					\
+	.write	 = simple_attr_write,					\
+	.llseek	 = generic_file_llseek,					\
+};
+
+static inline __printf(1, 2)
+void __simple_attr_check_format(const char *fmt, ...)
+{
+	/* don't do anything, just let the compiler check the arguments; */
+}
+
+int simple_attr_open(struct inode *inode, struct file *file,
+		     int (*get)(void *, u64 *), int (*set)(void *, u64),
+		     const char *fmt);
+int simple_attr_release(struct inode *inode, struct file *file);
+ssize_t simple_attr_read(struct file *file, char __user *buf,
+			 size_t len, loff_t *ppos);
+ssize_t simple_attr_write(struct file *file, const char __user *buf,
+			  size_t len, loff_t *ppos);
+
+struct ctl_table;
+int proc_nr_files(struct ctl_table *table, int write,
+		  void __user *buffer, size_t *lenp, loff_t *ppos);
+int proc_nr_dentry(struct ctl_table *table, int write,
+		  void __user *buffer, size_t *lenp, loff_t *ppos);
+int proc_nr_inodes(struct ctl_table *table, int write,
+		   void __user *buffer, size_t *lenp, loff_t *ppos);
+int __init get_filesystem_list(char *buf);
+
+#define __FMODE_EXEC		((__force int) FMODE_EXEC)
+#define __FMODE_NONOTIFY	((__force int) FMODE_NONOTIFY)
+
+#define ACC_MODE(x) ("\004\002\006\006"[(x)&O_ACCMODE])
+#define OPEN_FMODE(flag) ((__force fmode_t)(((flag + 1) & O_ACCMODE) | \
+					    (flag & __FMODE_NONOTIFY)))
+
+static inline int is_sxid(umode_t mode)
+{
+	return (mode & S_ISUID) || ((mode & S_ISGID) && (mode & S_IXGRP));
+}
+
+static inline void inode_has_no_xattr(struct inode *inode)
+{
+	if (!is_sxid(inode->i_mode) && (inode->i_sb->s_flags & MS_NOSEC))
+		inode->i_flags |= S_NOSEC;
+}
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_FS_H */
diff --git a/include/linux/fs_enet_pd.h b/include/linux/fs_enet_pd.h
new file mode 100644
index 00000000..51b79346
--- /dev/null
+++ b/include/linux/fs_enet_pd.h
@@ -0,0 +1,162 @@
+/*
+ * Platform information definitions for the
+ * universal Freescale Ethernet driver.
+ *
+ * Copyright (c) 2003 Intracom S.A. 
+ *  by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc. 
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License 
+ * version 2. This program is licensed "as is" without any warranty of any 
+ * kind, whether express or implied.
+ */
+
+#ifndef FS_ENET_PD_H
+#define FS_ENET_PD_H
+
+#include <linux/string.h>
+#include <linux/of_mdio.h>
+#include <asm/types.h>
+
+#define FS_ENET_NAME	"fs_enet"
+
+enum fs_id {
+	fsid_fec1,
+	fsid_fec2,
+	fsid_fcc1,
+	fsid_fcc2,
+	fsid_fcc3,
+	fsid_scc1,
+	fsid_scc2,
+	fsid_scc3,
+	fsid_scc4,
+};
+
+#define FS_MAX_INDEX	9
+
+static inline int fs_get_fec_index(enum fs_id id)
+{
+	if (id >= fsid_fec1 && id <= fsid_fec2)
+		return id - fsid_fec1;
+	return -1;
+}
+
+static inline int fs_get_fcc_index(enum fs_id id)
+{
+	if (id >= fsid_fcc1 && id <= fsid_fcc3)
+		return id - fsid_fcc1;
+	return -1;
+}
+
+static inline int fs_get_scc_index(enum fs_id id)
+{
+	if (id >= fsid_scc1 && id <= fsid_scc4)
+		return id - fsid_scc1;
+	return -1;
+}
+
+static inline int fs_fec_index2id(int index)
+{
+	int id = fsid_fec1 + index - 1;
+	if (id >= fsid_fec1 && id <= fsid_fec2)
+		return id;
+	return FS_MAX_INDEX;
+		}
+
+static inline int fs_fcc_index2id(int index)
+{
+	int id = fsid_fcc1 + index - 1;
+	if (id >= fsid_fcc1 && id <= fsid_fcc3)
+		return id;
+	return FS_MAX_INDEX;
+}
+
+static inline int fs_scc_index2id(int index)
+{
+	int id = fsid_scc1 + index - 1;
+	if (id >= fsid_scc1 && id <= fsid_scc4)
+		return id;
+	return FS_MAX_INDEX;
+}
+
+enum fs_mii_method {
+	fsmii_fixed,
+	fsmii_fec,
+	fsmii_bitbang,
+};
+
+enum fs_ioport {
+	fsiop_porta,
+	fsiop_portb,
+	fsiop_portc,
+	fsiop_portd,
+	fsiop_porte,
+};
+
+struct fs_mii_bit {
+	u32 offset;
+	u8 bit;
+	u8 polarity;
+};
+struct fs_mii_bb_platform_info {
+	struct fs_mii_bit 	mdio_dir;
+	struct fs_mii_bit 	mdio_dat;
+	struct fs_mii_bit	mdc_dat;
+	int delay;	/* delay in us         */
+	int irq[32]; 	/* irqs per phy's */
+};
+
+struct fs_platform_info {
+
+	void(*init_ioports)(struct fs_platform_info *);
+	/* device specific information */
+	int fs_no;		/* controller index            */
+	char fs_type[4];	/* controller type             */
+
+	u32 cp_page;		/* CPM page */
+	u32 cp_block;		/* CPM sblock */
+	u32 cp_command;		/* CPM page/sblock/mcn */
+
+	u32 clk_trx;		/* some stuff for pins & mux configuration*/
+	u32 clk_rx;
+	u32 clk_tx;
+	u32 clk_route;
+	u32 clk_mask;
+
+	u32 mem_offset;
+	u32 dpram_offset;
+	u32 fcc_regs_c;
+	
+	u32 device_flags;
+
+	struct device_node *phy_node;
+	const struct fs_mii_bus_info *bus_info;
+
+	int rx_ring, tx_ring;	/* number of buffers on rx     */
+	__u8 macaddr[6];	/* mac address                 */
+	int rx_copybreak;	/* limit we copy small frames  */
+	int use_napi;		/* use NAPI                    */
+	int napi_weight;	/* NAPI weight                 */
+
+	int use_rmii;		/* use RMII mode 	       */
+	int has_phy;            /* if the network is phy container as well...*/
+};
+struct fs_mii_fec_platform_info {
+	u32 irq[32];
+	u32 mii_speed;
+};
+
+static inline int fs_get_id(struct fs_platform_info *fpi)
+{
+	if(strstr(fpi->fs_type, "SCC"))
+		return fs_scc_index2id(fpi->fs_no);
+	if(strstr(fpi->fs_type, "FCC"))
+		return fs_fcc_index2id(fpi->fs_no);
+	if(strstr(fpi->fs_type, "FEC"))
+		return fs_fec_index2id(fpi->fs_no);
+	return fpi->fs_no;
+}
+
+#endif
diff --git a/include/linux/fs_stack.h b/include/linux/fs_stack.h
new file mode 100644
index 00000000..da317c71
--- /dev/null
+++ b/include/linux/fs_stack.h
@@ -0,0 +1,29 @@
+#ifndef _LINUX_FS_STACK_H
+#define _LINUX_FS_STACK_H
+
+/* This file defines generic functions used primarily by stackable
+ * filesystems; none of these functions require i_mutex to be held.
+ */
+
+#include <linux/fs.h>
+
+/* externs for fs/stack.c */
+extern void fsstack_copy_attr_all(struct inode *dest, const struct inode *src);
+extern void fsstack_copy_inode_size(struct inode *dst, struct inode *src);
+
+/* inlines */
+static inline void fsstack_copy_attr_atime(struct inode *dest,
+					   const struct inode *src)
+{
+	dest->i_atime = src->i_atime;
+}
+
+static inline void fsstack_copy_attr_times(struct inode *dest,
+					   const struct inode *src)
+{
+	dest->i_atime = src->i_atime;
+	dest->i_mtime = src->i_mtime;
+	dest->i_ctime = src->i_ctime;
+}
+
+#endif /* _LINUX_FS_STACK_H */
diff --git a/include/linux/fs_struct.h b/include/linux/fs_struct.h
new file mode 100644
index 00000000..003dc0fd
--- /dev/null
+++ b/include/linux/fs_struct.h
@@ -0,0 +1,54 @@
+#ifndef _LINUX_FS_STRUCT_H
+#define _LINUX_FS_STRUCT_H
+
+#include <linux/path.h>
+#include <linux/spinlock.h>
+#include <linux/seqlock.h>
+
+struct fs_struct {
+	int users;
+	spinlock_t lock;
+	seqcount_t seq;
+	int umask;
+	int in_exec;
+	struct path root, pwd;
+};
+
+extern struct kmem_cache *fs_cachep;
+
+extern void exit_fs(struct task_struct *);
+extern void set_fs_root(struct fs_struct *, struct path *);
+extern void set_fs_pwd(struct fs_struct *, struct path *);
+extern struct fs_struct *copy_fs_struct(struct fs_struct *);
+extern void free_fs_struct(struct fs_struct *);
+extern void daemonize_fs_struct(void);
+extern int unshare_fs_struct(void);
+
+static inline void get_fs_root(struct fs_struct *fs, struct path *root)
+{
+	spin_lock(&fs->lock);
+	*root = fs->root;
+	path_get(root);
+	spin_unlock(&fs->lock);
+}
+
+static inline void get_fs_pwd(struct fs_struct *fs, struct path *pwd)
+{
+	spin_lock(&fs->lock);
+	*pwd = fs->pwd;
+	path_get(pwd);
+	spin_unlock(&fs->lock);
+}
+
+static inline void get_fs_root_and_pwd(struct fs_struct *fs, struct path *root,
+				       struct path *pwd)
+{
+	spin_lock(&fs->lock);
+	*root = fs->root;
+	path_get(root);
+	*pwd = fs->pwd;
+	path_get(pwd);
+	spin_unlock(&fs->lock);
+}
+
+#endif /* _LINUX_FS_STRUCT_H */
diff --git a/include/linux/fs_uart_pd.h b/include/linux/fs_uart_pd.h
new file mode 100644
index 00000000..36b61ff3
--- /dev/null
+++ b/include/linux/fs_uart_pd.h
@@ -0,0 +1,71 @@
+/*
+ * Platform information definitions for the CPM Uart driver.
+ *
+ * 2006 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef FS_UART_PD_H
+#define FS_UART_PD_H
+
+#include <asm/types.h>
+
+enum fs_uart_id {
+	fsid_smc1_uart,
+	fsid_smc2_uart,
+	fsid_scc1_uart,
+	fsid_scc2_uart,
+	fsid_scc3_uart,
+	fsid_scc4_uart,
+	fs_uart_nr,
+};
+
+static inline int fs_uart_id_scc2fsid(int id)
+{
+    return fsid_scc1_uart + id - 1;
+}
+
+static inline int fs_uart_id_fsid2scc(int id)
+{
+    return id - fsid_scc1_uart + 1;
+}
+
+static inline int fs_uart_id_smc2fsid(int id)
+{
+    return fsid_smc1_uart + id - 1;
+}
+
+static inline int fs_uart_id_fsid2smc(int id)
+{
+    return id - fsid_smc1_uart + 1;
+}
+
+struct fs_uart_platform_info {
+        void(*init_ioports)(struct fs_uart_platform_info *);
+	/* device specific information */
+	int fs_no;		/* controller index */
+	char fs_type[4];        /* controller type  */
+	u32 uart_clk;
+	u8 tx_num_fifo;
+	u8 tx_buf_size;
+	u8 rx_num_fifo;
+	u8 rx_buf_size;
+	u8 brg;
+	u8 clk_rx;
+	u8 clk_tx;
+};
+
+static inline int fs_uart_get_id(struct fs_uart_platform_info *fpi)
+{
+        if(strstr(fpi->fs_type, "SMC"))
+                return fs_uart_id_smc2fsid(fpi->fs_no);
+        if(strstr(fpi->fs_type, "SCC"))
+                return fs_uart_id_scc2fsid(fpi->fs_no);
+        return fpi->fs_no;
+}
+
+#endif
diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h
new file mode 100644
index 00000000..ce31408b
--- /dev/null
+++ b/include/linux/fscache-cache.h
@@ -0,0 +1,516 @@
+/* General filesystem caching backing cache interface
+ *
+ * Copyright (C) 2004-2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * NOTE!!! See:
+ *
+ *	Documentation/filesystems/caching/backend-api.txt
+ *
+ * for a description of the cache backend interface declared here.
+ */
+
+#ifndef _LINUX_FSCACHE_CACHE_H
+#define _LINUX_FSCACHE_CACHE_H
+
+#include <linux/fscache.h>
+#include <linux/sched.h>
+#include <linux/workqueue.h>
+
+#define NR_MAXCACHES BITS_PER_LONG
+
+struct fscache_cache;
+struct fscache_cache_ops;
+struct fscache_object;
+struct fscache_operation;
+
+/*
+ * cache tag definition
+ */
+struct fscache_cache_tag {
+	struct list_head	link;
+	struct fscache_cache	*cache;		/* cache referred to by this tag */
+	unsigned long		flags;
+#define FSCACHE_TAG_RESERVED	0		/* T if tag is reserved for a cache */
+	atomic_t		usage;
+	char			name[0];	/* tag name */
+};
+
+/*
+ * cache definition
+ */
+struct fscache_cache {
+	const struct fscache_cache_ops *ops;
+	struct fscache_cache_tag *tag;		/* tag representing this cache */
+	struct kobject		*kobj;		/* system representation of this cache */
+	struct list_head	link;		/* link in list of caches */
+	size_t			max_index_size;	/* maximum size of index data */
+	char			identifier[36];	/* cache label */
+
+	/* node management */
+	struct work_struct	op_gc;		/* operation garbage collector */
+	struct list_head	object_list;	/* list of data/index objects */
+	struct list_head	op_gc_list;	/* list of ops to be deleted */
+	spinlock_t		object_list_lock;
+	spinlock_t		op_gc_list_lock;
+	atomic_t		object_count;	/* no. of live objects in this cache */
+	struct fscache_object	*fsdef;		/* object for the fsdef index */
+	unsigned long		flags;
+#define FSCACHE_IOERROR		0	/* cache stopped on I/O error */
+#define FSCACHE_CACHE_WITHDRAWN	1	/* cache has been withdrawn */
+};
+
+extern wait_queue_head_t fscache_cache_cleared_wq;
+
+/*
+ * operation to be applied to a cache object
+ * - retrieval initiation operations are done in the context of the process
+ *   that issued them, and not in an async thread pool
+ */
+typedef void (*fscache_operation_release_t)(struct fscache_operation *op);
+typedef void (*fscache_operation_processor_t)(struct fscache_operation *op);
+
+struct fscache_operation {
+	struct work_struct	work;		/* record for async ops */
+	struct list_head	pend_link;	/* link in object->pending_ops */
+	struct fscache_object	*object;	/* object to be operated upon */
+
+	unsigned long		flags;
+#define FSCACHE_OP_TYPE		0x000f	/* operation type */
+#define FSCACHE_OP_ASYNC	0x0001	/* - async op, processor may sleep for disk */
+#define FSCACHE_OP_MYTHREAD	0x0002	/* - processing is done be issuing thread, not pool */
+#define FSCACHE_OP_WAITING	4	/* cleared when op is woken */
+#define FSCACHE_OP_EXCLUSIVE	5	/* exclusive op, other ops must wait */
+#define FSCACHE_OP_DEAD		6	/* op is now dead */
+#define FSCACHE_OP_DEC_READ_CNT	7	/* decrement object->n_reads on destruction */
+#define FSCACHE_OP_KEEP_FLAGS	0xc0	/* flags to keep when repurposing an op */
+
+	atomic_t		usage;
+	unsigned		debug_id;	/* debugging ID */
+
+	/* operation processor callback
+	 * - can be NULL if FSCACHE_OP_WAITING is going to be used to perform
+	 *   the op in a non-pool thread */
+	fscache_operation_processor_t processor;
+
+	/* operation releaser */
+	fscache_operation_release_t release;
+};
+
+extern atomic_t fscache_op_debug_id;
+extern void fscache_op_work_func(struct work_struct *work);
+
+extern void fscache_enqueue_operation(struct fscache_operation *);
+extern void fscache_put_operation(struct fscache_operation *);
+
+/**
+ * fscache_operation_init - Do basic initialisation of an operation
+ * @op: The operation to initialise
+ * @release: The release function to assign
+ *
+ * Do basic initialisation of an operation.  The caller must still set flags,
+ * object and processor if needed.
+ */
+static inline void fscache_operation_init(struct fscache_operation *op,
+					fscache_operation_processor_t processor,
+					fscache_operation_release_t release)
+{
+	INIT_WORK(&op->work, fscache_op_work_func);
+	atomic_set(&op->usage, 1);
+	op->debug_id = atomic_inc_return(&fscache_op_debug_id);
+	op->processor = processor;
+	op->release = release;
+	INIT_LIST_HEAD(&op->pend_link);
+}
+
+/*
+ * data read operation
+ */
+struct fscache_retrieval {
+	struct fscache_operation op;
+	struct address_space	*mapping;	/* netfs pages */
+	fscache_rw_complete_t	end_io_func;	/* function to call on I/O completion */
+	void			*context;	/* netfs read context (pinned) */
+	struct list_head	to_do;		/* list of things to be done by the backend */
+	unsigned long		start_time;	/* time at which retrieval started */
+};
+
+typedef int (*fscache_page_retrieval_func_t)(struct fscache_retrieval *op,
+					     struct page *page,
+					     gfp_t gfp);
+
+typedef int (*fscache_pages_retrieval_func_t)(struct fscache_retrieval *op,
+					      struct list_head *pages,
+					      unsigned *nr_pages,
+					      gfp_t gfp);
+
+/**
+ * fscache_get_retrieval - Get an extra reference on a retrieval operation
+ * @op: The retrieval operation to get a reference on
+ *
+ * Get an extra reference on a retrieval operation.
+ */
+static inline
+struct fscache_retrieval *fscache_get_retrieval(struct fscache_retrieval *op)
+{
+	atomic_inc(&op->op.usage);
+	return op;
+}
+
+/**
+ * fscache_enqueue_retrieval - Enqueue a retrieval operation for processing
+ * @op: The retrieval operation affected
+ *
+ * Enqueue a retrieval operation for processing by the FS-Cache thread pool.
+ */
+static inline void fscache_enqueue_retrieval(struct fscache_retrieval *op)
+{
+	fscache_enqueue_operation(&op->op);
+}
+
+/**
+ * fscache_put_retrieval - Drop a reference to a retrieval operation
+ * @op: The retrieval operation affected
+ *
+ * Drop a reference to a retrieval operation.
+ */
+static inline void fscache_put_retrieval(struct fscache_retrieval *op)
+{
+	fscache_put_operation(&op->op);
+}
+
+/*
+ * cached page storage work item
+ * - used to do three things:
+ *   - batch writes to the cache
+ *   - do cache writes asynchronously
+ *   - defer writes until cache object lookup completion
+ */
+struct fscache_storage {
+	struct fscache_operation op;
+	pgoff_t			store_limit;	/* don't write more than this */
+};
+
+/*
+ * cache operations
+ */
+struct fscache_cache_ops {
+	/* name of cache provider */
+	const char *name;
+
+	/* allocate an object record for a cookie */
+	struct fscache_object *(*alloc_object)(struct fscache_cache *cache,
+					       struct fscache_cookie *cookie);
+
+	/* look up the object for a cookie
+	 * - return -ETIMEDOUT to be requeued
+	 */
+	int (*lookup_object)(struct fscache_object *object);
+
+	/* finished looking up */
+	void (*lookup_complete)(struct fscache_object *object);
+
+	/* increment the usage count on this object (may fail if unmounting) */
+	struct fscache_object *(*grab_object)(struct fscache_object *object);
+
+	/* pin an object in the cache */
+	int (*pin_object)(struct fscache_object *object);
+
+	/* unpin an object in the cache */
+	void (*unpin_object)(struct fscache_object *object);
+
+	/* store the updated auxiliary data on an object */
+	void (*update_object)(struct fscache_object *object);
+
+	/* discard the resources pinned by an object and effect retirement if
+	 * necessary */
+	void (*drop_object)(struct fscache_object *object);
+
+	/* dispose of a reference to an object */
+	void (*put_object)(struct fscache_object *object);
+
+	/* sync a cache */
+	void (*sync_cache)(struct fscache_cache *cache);
+
+	/* notification that the attributes of a non-index object (such as
+	 * i_size) have changed */
+	int (*attr_changed)(struct fscache_object *object);
+
+	/* reserve space for an object's data and associated metadata */
+	int (*reserve_space)(struct fscache_object *object, loff_t i_size);
+
+	/* request a backing block for a page be read or allocated in the
+	 * cache */
+	fscache_page_retrieval_func_t read_or_alloc_page;
+
+	/* request backing blocks for a list of pages be read or allocated in
+	 * the cache */
+	fscache_pages_retrieval_func_t read_or_alloc_pages;
+
+	/* request a backing block for a page be allocated in the cache so that
+	 * it can be written directly */
+	fscache_page_retrieval_func_t allocate_page;
+
+	/* request backing blocks for pages be allocated in the cache so that
+	 * they can be written directly */
+	fscache_pages_retrieval_func_t allocate_pages;
+
+	/* write a page to its backing block in the cache */
+	int (*write_page)(struct fscache_storage *op, struct page *page);
+
+	/* detach backing block from a page (optional)
+	 * - must release the cookie lock before returning
+	 * - may sleep
+	 */
+	void (*uncache_page)(struct fscache_object *object,
+			     struct page *page);
+
+	/* dissociate a cache from all the pages it was backing */
+	void (*dissociate_pages)(struct fscache_cache *cache);
+};
+
+/*
+ * data file or index object cookie
+ * - a file will only appear in one cache
+ * - a request to cache a file may or may not be honoured, subject to
+ *   constraints such as disk space
+ * - indices are created on disk just-in-time
+ */
+struct fscache_cookie {
+	atomic_t			usage;		/* number of users of this cookie */
+	atomic_t			n_children;	/* number of children of this cookie */
+	spinlock_t			lock;
+	spinlock_t			stores_lock;	/* lock on page store tree */
+	struct hlist_head		backing_objects; /* object(s) backing this file/index */
+	const struct fscache_cookie_def	*def;		/* definition */
+	struct fscache_cookie		*parent;	/* parent of this entry */
+	void				*netfs_data;	/* back pointer to netfs */
+	struct radix_tree_root		stores;		/* pages to be stored on this cookie */
+#define FSCACHE_COOKIE_PENDING_TAG	0		/* pages tag: pending write to cache */
+#define FSCACHE_COOKIE_STORING_TAG	1		/* pages tag: writing to cache */
+
+	unsigned long			flags;
+#define FSCACHE_COOKIE_LOOKING_UP	0	/* T if non-index cookie being looked up still */
+#define FSCACHE_COOKIE_CREATING		1	/* T if non-index object being created still */
+#define FSCACHE_COOKIE_NO_DATA_YET	2	/* T if new object with no cached data yet */
+#define FSCACHE_COOKIE_PENDING_FILL	3	/* T if pending initial fill on object */
+#define FSCACHE_COOKIE_FILLING		4	/* T if filling object incrementally */
+#define FSCACHE_COOKIE_UNAVAILABLE	5	/* T if cookie is unavailable (error, etc) */
+};
+
+extern struct fscache_cookie fscache_fsdef_index;
+
+/*
+ * on-disk cache file or index handle
+ */
+struct fscache_object {
+	enum fscache_object_state {
+		FSCACHE_OBJECT_INIT,		/* object in initial unbound state */
+		FSCACHE_OBJECT_LOOKING_UP,	/* looking up object */
+		FSCACHE_OBJECT_CREATING,	/* creating object */
+
+		/* active states */
+		FSCACHE_OBJECT_AVAILABLE,	/* cleaning up object after creation */
+		FSCACHE_OBJECT_ACTIVE,		/* object is usable */
+		FSCACHE_OBJECT_UPDATING,	/* object is updating */
+
+		/* terminal states */
+		FSCACHE_OBJECT_DYING,		/* object waiting for accessors to finish */
+		FSCACHE_OBJECT_LC_DYING,	/* object cleaning up after lookup/create */
+		FSCACHE_OBJECT_ABORT_INIT,	/* abort the init state */
+		FSCACHE_OBJECT_RELEASING,	/* releasing object */
+		FSCACHE_OBJECT_RECYCLING,	/* retiring object */
+		FSCACHE_OBJECT_WITHDRAWING,	/* withdrawing object */
+		FSCACHE_OBJECT_DEAD,		/* object is now dead */
+		FSCACHE_OBJECT__NSTATES
+	} state;
+
+	int			debug_id;	/* debugging ID */
+	int			n_children;	/* number of child objects */
+	int			n_ops;		/* number of ops outstanding on object */
+	int			n_obj_ops;	/* number of object ops outstanding on object */
+	int			n_in_progress;	/* number of ops in progress */
+	int			n_exclusive;	/* number of exclusive ops queued */
+	atomic_t		n_reads;	/* number of read ops in progress */
+	spinlock_t		lock;		/* state and operations lock */
+
+	unsigned long		lookup_jif;	/* time at which lookup started */
+	unsigned long		event_mask;	/* events this object is interested in */
+	unsigned long		events;		/* events to be processed by this object
+						 * (order is important - using fls) */
+#define FSCACHE_OBJECT_EV_REQUEUE	0	/* T if object should be requeued */
+#define FSCACHE_OBJECT_EV_UPDATE	1	/* T if object should be updated */
+#define FSCACHE_OBJECT_EV_CLEARED	2	/* T if accessors all gone */
+#define FSCACHE_OBJECT_EV_ERROR		3	/* T if fatal error occurred during processing */
+#define FSCACHE_OBJECT_EV_RELEASE	4	/* T if netfs requested object release */
+#define FSCACHE_OBJECT_EV_RETIRE	5	/* T if netfs requested object retirement */
+#define FSCACHE_OBJECT_EV_WITHDRAW	6	/* T if cache requested object withdrawal */
+#define FSCACHE_OBJECT_EVENTS_MASK	0x7f	/* mask of all events*/
+
+	unsigned long		flags;
+#define FSCACHE_OBJECT_LOCK		0	/* T if object is busy being processed */
+#define FSCACHE_OBJECT_PENDING_WRITE	1	/* T if object has pending write */
+#define FSCACHE_OBJECT_WAITING		2	/* T if object is waiting on its parent */
+
+	struct list_head	cache_link;	/* link in cache->object_list */
+	struct hlist_node	cookie_link;	/* link in cookie->backing_objects */
+	struct fscache_cache	*cache;		/* cache that supplied this object */
+	struct fscache_cookie	*cookie;	/* netfs's file/index object */
+	struct fscache_object	*parent;	/* parent object */
+	struct work_struct	work;		/* attention scheduling record */
+	struct list_head	dependents;	/* FIFO of dependent objects */
+	struct list_head	dep_link;	/* link in parent's dependents list */
+	struct list_head	pending_ops;	/* unstarted operations on this object */
+#ifdef CONFIG_FSCACHE_OBJECT_LIST
+	struct rb_node		objlist_link;	/* link in global object list */
+#endif
+	pgoff_t			store_limit;	/* current storage limit */
+	loff_t			store_limit_l;	/* current storage limit */
+};
+
+extern const char *fscache_object_states[];
+
+#define fscache_object_is_active(obj)			      \
+	(!test_bit(FSCACHE_IOERROR, &(obj)->cache->flags) &&  \
+	 (obj)->state >= FSCACHE_OBJECT_AVAILABLE &&	      \
+	 (obj)->state < FSCACHE_OBJECT_DYING)
+
+#define fscache_object_is_dead(obj)				\
+	(test_bit(FSCACHE_IOERROR, &(obj)->cache->flags) &&	\
+	 (obj)->state >= FSCACHE_OBJECT_DYING)
+
+extern void fscache_object_work_func(struct work_struct *work);
+
+/**
+ * fscache_object_init - Initialise a cache object description
+ * @object: Object description
+ *
+ * Initialise a cache object description to its basic values.
+ *
+ * See Documentation/filesystems/caching/backend-api.txt for a complete
+ * description.
+ */
+static inline
+void fscache_object_init(struct fscache_object *object,
+			 struct fscache_cookie *cookie,
+			 struct fscache_cache *cache)
+{
+	atomic_inc(&cache->object_count);
+
+	object->state = FSCACHE_OBJECT_INIT;
+	spin_lock_init(&object->lock);
+	INIT_LIST_HEAD(&object->cache_link);
+	INIT_HLIST_NODE(&object->cookie_link);
+	INIT_WORK(&object->work, fscache_object_work_func);
+	INIT_LIST_HEAD(&object->dependents);
+	INIT_LIST_HEAD(&object->dep_link);
+	INIT_LIST_HEAD(&object->pending_ops);
+	object->n_children = 0;
+	object->n_ops = object->n_in_progress = object->n_exclusive = 0;
+	object->events = object->event_mask = 0;
+	object->flags = 0;
+	object->store_limit = 0;
+	object->store_limit_l = 0;
+	object->cache = cache;
+	object->cookie = cookie;
+	object->parent = NULL;
+}
+
+extern void fscache_object_lookup_negative(struct fscache_object *object);
+extern void fscache_obtained_object(struct fscache_object *object);
+
+#ifdef CONFIG_FSCACHE_OBJECT_LIST
+extern void fscache_object_destroy(struct fscache_object *object);
+#else
+#define fscache_object_destroy(object) do {} while(0)
+#endif
+
+/**
+ * fscache_object_destroyed - Note destruction of an object in a cache
+ * @cache: The cache from which the object came
+ *
+ * Note the destruction and deallocation of an object record in a cache.
+ */
+static inline void fscache_object_destroyed(struct fscache_cache *cache)
+{
+	if (atomic_dec_and_test(&cache->object_count))
+		wake_up_all(&fscache_cache_cleared_wq);
+}
+
+/**
+ * fscache_object_lookup_error - Note an object encountered an error
+ * @object: The object on which the error was encountered
+ *
+ * Note that an object encountered a fatal error (usually an I/O error) and
+ * that it should be withdrawn as soon as possible.
+ */
+static inline void fscache_object_lookup_error(struct fscache_object *object)
+{
+	set_bit(FSCACHE_OBJECT_EV_ERROR, &object->events);
+}
+
+/**
+ * fscache_set_store_limit - Set the maximum size to be stored in an object
+ * @object: The object to set the maximum on
+ * @i_size: The limit to set in bytes
+ *
+ * Set the maximum size an object is permitted to reach, implying the highest
+ * byte that may be written.  Intended to be called by the attr_changed() op.
+ *
+ * See Documentation/filesystems/caching/backend-api.txt for a complete
+ * description.
+ */
+static inline
+void fscache_set_store_limit(struct fscache_object *object, loff_t i_size)
+{
+	object->store_limit_l = i_size;
+	object->store_limit = i_size >> PAGE_SHIFT;
+	if (i_size & ~PAGE_MASK)
+		object->store_limit++;
+}
+
+/**
+ * fscache_end_io - End a retrieval operation on a page
+ * @op: The FS-Cache operation covering the retrieval
+ * @page: The page that was to be fetched
+ * @error: The error code (0 if successful)
+ *
+ * Note the end of an operation to retrieve a page, as covered by a particular
+ * operation record.
+ */
+static inline void fscache_end_io(struct fscache_retrieval *op,
+				  struct page *page, int error)
+{
+	op->end_io_func(page, op->context, error);
+}
+
+/*
+ * out-of-line cache backend functions
+ */
+extern __printf(3, 4)
+void fscache_init_cache(struct fscache_cache *cache,
+			const struct fscache_cache_ops *ops,
+			const char *idfmt, ...);
+
+extern int fscache_add_cache(struct fscache_cache *cache,
+			     struct fscache_object *fsdef,
+			     const char *tagname);
+extern void fscache_withdraw_cache(struct fscache_cache *cache);
+
+extern void fscache_io_error(struct fscache_cache *cache);
+
+extern void fscache_mark_pages_cached(struct fscache_retrieval *op,
+				      struct pagevec *pagevec);
+
+extern bool fscache_object_sleep_till_congested(signed long *timeoutp);
+
+extern enum fscache_checkaux fscache_check_aux(struct fscache_object *object,
+					       const void *data,
+					       uint16_t datalen);
+
+#endif /* _LINUX_FSCACHE_CACHE_H */
diff --git a/include/linux/fscache.h b/include/linux/fscache.h
new file mode 100644
index 00000000..9ec20dec
--- /dev/null
+++ b/include/linux/fscache.h
@@ -0,0 +1,667 @@
+/* General filesystem caching interface
+ *
+ * Copyright (C) 2004-2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * NOTE!!! See:
+ *
+ *	Documentation/filesystems/caching/netfs-api.txt
+ *
+ * for a description of the network filesystem interface declared here.
+ */
+
+#ifndef _LINUX_FSCACHE_H
+#define _LINUX_FSCACHE_H
+
+#include <linux/fs.h>
+#include <linux/list.h>
+#include <linux/pagemap.h>
+#include <linux/pagevec.h>
+
+#if defined(CONFIG_FSCACHE) || defined(CONFIG_FSCACHE_MODULE)
+#define fscache_available() (1)
+#define fscache_cookie_valid(cookie) (cookie)
+#else
+#define fscache_available() (0)
+#define fscache_cookie_valid(cookie) (0)
+#endif
+
+
+/*
+ * overload PG_private_2 to give us PG_fscache - this is used to indicate that
+ * a page is currently backed by a local disk cache
+ */
+#define PageFsCache(page)		PagePrivate2((page))
+#define SetPageFsCache(page)		SetPagePrivate2((page))
+#define ClearPageFsCache(page)		ClearPagePrivate2((page))
+#define TestSetPageFsCache(page)	TestSetPagePrivate2((page))
+#define TestClearPageFsCache(page)	TestClearPagePrivate2((page))
+
+/* pattern used to fill dead space in an index entry */
+#define FSCACHE_INDEX_DEADFILL_PATTERN 0x79
+
+struct pagevec;
+struct fscache_cache_tag;
+struct fscache_cookie;
+struct fscache_netfs;
+
+typedef void (*fscache_rw_complete_t)(struct page *page,
+				      void *context,
+				      int error);
+
+/* result of index entry consultation */
+enum fscache_checkaux {
+	FSCACHE_CHECKAUX_OKAY,		/* entry okay as is */
+	FSCACHE_CHECKAUX_NEEDS_UPDATE,	/* entry requires update */
+	FSCACHE_CHECKAUX_OBSOLETE,	/* entry requires deletion */
+};
+
+/*
+ * fscache cookie definition
+ */
+struct fscache_cookie_def {
+	/* name of cookie type */
+	char name[16];
+
+	/* cookie type */
+	uint8_t type;
+#define FSCACHE_COOKIE_TYPE_INDEX	0
+#define FSCACHE_COOKIE_TYPE_DATAFILE	1
+
+	/* select the cache into which to insert an entry in this index
+	 * - optional
+	 * - should return a cache identifier or NULL to cause the cache to be
+	 *   inherited from the parent if possible or the first cache picked
+	 *   for a non-index file if not
+	 */
+	struct fscache_cache_tag *(*select_cache)(
+		const void *parent_netfs_data,
+		const void *cookie_netfs_data);
+
+	/* get an index key
+	 * - should store the key data in the buffer
+	 * - should return the amount of data stored
+	 * - not permitted to return an error
+	 * - the netfs data from the cookie being used as the source is
+	 *   presented
+	 */
+	uint16_t (*get_key)(const void *cookie_netfs_data,
+			    void *buffer,
+			    uint16_t bufmax);
+
+	/* get certain file attributes from the netfs data
+	 * - this function can be absent for an index
+	 * - not permitted to return an error
+	 * - the netfs data from the cookie being used as the source is
+	 *   presented
+	 */
+	void (*get_attr)(const void *cookie_netfs_data, uint64_t *size);
+
+	/* get the auxiliary data from netfs data
+	 * - this function can be absent if the index carries no state data
+	 * - should store the auxiliary data in the buffer
+	 * - should return the amount of amount stored
+	 * - not permitted to return an error
+	 * - the netfs data from the cookie being used as the source is
+	 *   presented
+	 */
+	uint16_t (*get_aux)(const void *cookie_netfs_data,
+			    void *buffer,
+			    uint16_t bufmax);
+
+	/* consult the netfs about the state of an object
+	 * - this function can be absent if the index carries no state data
+	 * - the netfs data from the cookie being used as the target is
+	 *   presented, as is the auxiliary data
+	 */
+	enum fscache_checkaux (*check_aux)(void *cookie_netfs_data,
+					   const void *data,
+					   uint16_t datalen);
+
+	/* get an extra reference on a read context
+	 * - this function can be absent if the completion function doesn't
+	 *   require a context
+	 */
+	void (*get_context)(void *cookie_netfs_data, void *context);
+
+	/* release an extra reference on a read context
+	 * - this function can be absent if the completion function doesn't
+	 *   require a context
+	 */
+	void (*put_context)(void *cookie_netfs_data, void *context);
+
+	/* indicate pages that now have cache metadata retained
+	 * - this function should mark the specified pages as now being cached
+	 * - the pages will have been marked with PG_fscache before this is
+	 *   called, so this is optional
+	 */
+	void (*mark_pages_cached)(void *cookie_netfs_data,
+				  struct address_space *mapping,
+				  struct pagevec *cached_pvec);
+
+	/* indicate the cookie is no longer cached
+	 * - this function is called when the backing store currently caching
+	 *   a cookie is removed
+	 * - the netfs should use this to clean up any markers indicating
+	 *   cached pages
+	 * - this is mandatory for any object that may have data
+	 */
+	void (*now_uncached)(void *cookie_netfs_data);
+};
+
+/*
+ * fscache cached network filesystem type
+ * - name, version and ops must be filled in before registration
+ * - all other fields will be set during registration
+ */
+struct fscache_netfs {
+	uint32_t			version;	/* indexing version */
+	const char			*name;		/* filesystem name */
+	struct fscache_cookie		*primary_index;
+	struct list_head		link;		/* internal link */
+};
+
+/*
+ * slow-path functions for when there is actually caching available, and the
+ * netfs does actually have a valid token
+ * - these are not to be called directly
+ * - these are undefined symbols when FS-Cache is not configured and the
+ *   optimiser takes care of not using them
+ */
+extern int __fscache_register_netfs(struct fscache_netfs *);
+extern void __fscache_unregister_netfs(struct fscache_netfs *);
+extern struct fscache_cache_tag *__fscache_lookup_cache_tag(const char *);
+extern void __fscache_release_cache_tag(struct fscache_cache_tag *);
+
+extern struct fscache_cookie *__fscache_acquire_cookie(
+	struct fscache_cookie *,
+	const struct fscache_cookie_def *,
+	void *);
+extern void __fscache_relinquish_cookie(struct fscache_cookie *, int);
+extern void __fscache_update_cookie(struct fscache_cookie *);
+extern int __fscache_attr_changed(struct fscache_cookie *);
+extern int __fscache_read_or_alloc_page(struct fscache_cookie *,
+					struct page *,
+					fscache_rw_complete_t,
+					void *,
+					gfp_t);
+extern int __fscache_read_or_alloc_pages(struct fscache_cookie *,
+					 struct address_space *,
+					 struct list_head *,
+					 unsigned *,
+					 fscache_rw_complete_t,
+					 void *,
+					 gfp_t);
+extern int __fscache_alloc_page(struct fscache_cookie *, struct page *, gfp_t);
+extern int __fscache_write_page(struct fscache_cookie *, struct page *, gfp_t);
+extern void __fscache_uncache_page(struct fscache_cookie *, struct page *);
+extern bool __fscache_check_page_write(struct fscache_cookie *, struct page *);
+extern void __fscache_wait_on_page_write(struct fscache_cookie *, struct page *);
+extern bool __fscache_maybe_release_page(struct fscache_cookie *, struct page *,
+					 gfp_t);
+extern void __fscache_uncache_all_inode_pages(struct fscache_cookie *,
+					      struct inode *);
+
+/**
+ * fscache_register_netfs - Register a filesystem as desiring caching services
+ * @netfs: The description of the filesystem
+ *
+ * Register a filesystem as desiring caching services if they're available.
+ *
+ * See Documentation/filesystems/caching/netfs-api.txt for a complete
+ * description.
+ */
+static inline
+int fscache_register_netfs(struct fscache_netfs *netfs)
+{
+	if (fscache_available())
+		return __fscache_register_netfs(netfs);
+	else
+		return 0;
+}
+
+/**
+ * fscache_unregister_netfs - Indicate that a filesystem no longer desires
+ * caching services
+ * @netfs: The description of the filesystem
+ *
+ * Indicate that a filesystem no longer desires caching services for the
+ * moment.
+ *
+ * See Documentation/filesystems/caching/netfs-api.txt for a complete
+ * description.
+ */
+static inline
+void fscache_unregister_netfs(struct fscache_netfs *netfs)
+{
+	if (fscache_available())
+		__fscache_unregister_netfs(netfs);
+}
+
+/**
+ * fscache_lookup_cache_tag - Look up a cache tag
+ * @name: The name of the tag to search for
+ *
+ * Acquire a specific cache referral tag that can be used to select a specific
+ * cache in which to cache an index.
+ *
+ * See Documentation/filesystems/caching/netfs-api.txt for a complete
+ * description.
+ */
+static inline
+struct fscache_cache_tag *fscache_lookup_cache_tag(const char *name)
+{
+	if (fscache_available())
+		return __fscache_lookup_cache_tag(name);
+	else
+		return NULL;
+}
+
+/**
+ * fscache_release_cache_tag - Release a cache tag
+ * @tag: The tag to release
+ *
+ * Release a reference to a cache referral tag previously looked up.
+ *
+ * See Documentation/filesystems/caching/netfs-api.txt for a complete
+ * description.
+ */
+static inline
+void fscache_release_cache_tag(struct fscache_cache_tag *tag)
+{
+	if (fscache_available())
+		__fscache_release_cache_tag(tag);
+}
+
+/**
+ * fscache_acquire_cookie - Acquire a cookie to represent a cache object
+ * @parent: The cookie that's to be the parent of this one
+ * @def: A description of the cache object, including callback operations
+ * @netfs_data: An arbitrary piece of data to be kept in the cookie to
+ * represent the cache object to the netfs
+ *
+ * This function is used to inform FS-Cache about part of an index hierarchy
+ * that can be used to locate files.  This is done by requesting a cookie for
+ * each index in the path to the file.
+ *
+ * See Documentation/filesystems/caching/netfs-api.txt for a complete
+ * description.
+ */
+static inline
+struct fscache_cookie *fscache_acquire_cookie(
+	struct fscache_cookie *parent,
+	const struct fscache_cookie_def *def,
+	void *netfs_data)
+{
+	if (fscache_cookie_valid(parent))
+		return __fscache_acquire_cookie(parent, def, netfs_data);
+	else
+		return NULL;
+}
+
+/**
+ * fscache_relinquish_cookie - Return the cookie to the cache, maybe discarding
+ * it
+ * @cookie: The cookie being returned
+ * @retire: True if the cache object the cookie represents is to be discarded
+ *
+ * This function returns a cookie to the cache, forcibly discarding the
+ * associated cache object if retire is set to true.
+ *
+ * See Documentation/filesystems/caching/netfs-api.txt for a complete
+ * description.
+ */
+static inline
+void fscache_relinquish_cookie(struct fscache_cookie *cookie, int retire)
+{
+	if (fscache_cookie_valid(cookie))
+		__fscache_relinquish_cookie(cookie, retire);
+}
+
+/**
+ * fscache_update_cookie - Request that a cache object be updated
+ * @cookie: The cookie representing the cache object
+ *
+ * Request an update of the index data for the cache object associated with the
+ * cookie.
+ *
+ * See Documentation/filesystems/caching/netfs-api.txt for a complete
+ * description.
+ */
+static inline
+void fscache_update_cookie(struct fscache_cookie *cookie)
+{
+	if (fscache_cookie_valid(cookie))
+		__fscache_update_cookie(cookie);
+}
+
+/**
+ * fscache_pin_cookie - Pin a data-storage cache object in its cache
+ * @cookie: The cookie representing the cache object
+ *
+ * Permit data-storage cache objects to be pinned in the cache.
+ *
+ * See Documentation/filesystems/caching/netfs-api.txt for a complete
+ * description.
+ */
+static inline
+int fscache_pin_cookie(struct fscache_cookie *cookie)
+{
+	return -ENOBUFS;
+}
+
+/**
+ * fscache_pin_cookie - Unpin a data-storage cache object in its cache
+ * @cookie: The cookie representing the cache object
+ *
+ * Permit data-storage cache objects to be unpinned from the cache.
+ *
+ * See Documentation/filesystems/caching/netfs-api.txt for a complete
+ * description.
+ */
+static inline
+void fscache_unpin_cookie(struct fscache_cookie *cookie)
+{
+}
+
+/**
+ * fscache_attr_changed - Notify cache that an object's attributes changed
+ * @cookie: The cookie representing the cache object
+ *
+ * Send a notification to the cache indicating that an object's attributes have
+ * changed.  This includes the data size.  These attributes will be obtained
+ * through the get_attr() cookie definition op.
+ *
+ * See Documentation/filesystems/caching/netfs-api.txt for a complete
+ * description.
+ */
+static inline
+int fscache_attr_changed(struct fscache_cookie *cookie)
+{
+	if (fscache_cookie_valid(cookie))
+		return __fscache_attr_changed(cookie);
+	else
+		return -ENOBUFS;
+}
+
+/**
+ * fscache_reserve_space - Reserve data space for a cached object
+ * @cookie: The cookie representing the cache object
+ * @i_size: The amount of space to be reserved
+ *
+ * Reserve an amount of space in the cache for the cache object attached to a
+ * cookie so that a write to that object within the space can always be
+ * honoured.
+ *
+ * See Documentation/filesystems/caching/netfs-api.txt for a complete
+ * description.
+ */
+static inline
+int fscache_reserve_space(struct fscache_cookie *cookie, loff_t size)
+{
+	return -ENOBUFS;
+}
+
+/**
+ * fscache_read_or_alloc_page - Read a page from the cache or allocate a block
+ * in which to store it
+ * @cookie: The cookie representing the cache object
+ * @page: The netfs page to fill if possible
+ * @end_io_func: The callback to invoke when and if the page is filled
+ * @context: An arbitrary piece of data to pass on to end_io_func()
+ * @gfp: The conditions under which memory allocation should be made
+ *
+ * Read a page from the cache, or if that's not possible make a potential
+ * one-block reservation in the cache into which the page may be stored once
+ * fetched from the server.
+ *
+ * If the page is not backed by the cache object, or if it there's some reason
+ * it can't be, -ENOBUFS will be returned and nothing more will be done for
+ * that page.
+ *
+ * Else, if that page is backed by the cache, a read will be initiated directly
+ * to the netfs's page and 0 will be returned by this function.  The
+ * end_io_func() callback will be invoked when the operation terminates on a
+ * completion or failure.  Note that the callback may be invoked before the
+ * return.
+ *
+ * Else, if the page is unbacked, -ENODATA is returned and a block may have
+ * been allocated in the cache.
+ *
+ * See Documentation/filesystems/caching/netfs-api.txt for a complete
+ * description.
+ */
+static inline
+int fscache_read_or_alloc_page(struct fscache_cookie *cookie,
+			       struct page *page,
+			       fscache_rw_complete_t end_io_func,
+			       void *context,
+			       gfp_t gfp)
+{
+	if (fscache_cookie_valid(cookie))
+		return __fscache_read_or_alloc_page(cookie, page, end_io_func,
+						    context, gfp);
+	else
+		return -ENOBUFS;
+}
+
+/**
+ * fscache_read_or_alloc_pages - Read pages from the cache and/or allocate
+ * blocks in which to store them
+ * @cookie: The cookie representing the cache object
+ * @mapping: The netfs inode mapping to which the pages will be attached
+ * @pages: A list of potential netfs pages to be filled
+ * @nr_pages: Number of pages to be read and/or allocated
+ * @end_io_func: The callback to invoke when and if each page is filled
+ * @context: An arbitrary piece of data to pass on to end_io_func()
+ * @gfp: The conditions under which memory allocation should be made
+ *
+ * Read a set of pages from the cache, or if that's not possible, attempt to
+ * make a potential one-block reservation for each page in the cache into which
+ * that page may be stored once fetched from the server.
+ *
+ * If some pages are not backed by the cache object, or if it there's some
+ * reason they can't be, -ENOBUFS will be returned and nothing more will be
+ * done for that pages.
+ *
+ * Else, if some of the pages are backed by the cache, a read will be initiated
+ * directly to the netfs's page and 0 will be returned by this function.  The
+ * end_io_func() callback will be invoked when the operation terminates on a
+ * completion or failure.  Note that the callback may be invoked before the
+ * return.
+ *
+ * Else, if a page is unbacked, -ENODATA is returned and a block may have
+ * been allocated in the cache.
+ *
+ * Because the function may want to return all of -ENOBUFS, -ENODATA and 0 in
+ * regard to different pages, the return values are prioritised in that order.
+ * Any pages submitted for reading are removed from the pages list.
+ *
+ * See Documentation/filesystems/caching/netfs-api.txt for a complete
+ * description.
+ */
+static inline
+int fscache_read_or_alloc_pages(struct fscache_cookie *cookie,
+				struct address_space *mapping,
+				struct list_head *pages,
+				unsigned *nr_pages,
+				fscache_rw_complete_t end_io_func,
+				void *context,
+				gfp_t gfp)
+{
+	if (fscache_cookie_valid(cookie))
+		return __fscache_read_or_alloc_pages(cookie, mapping, pages,
+						     nr_pages, end_io_func,
+						     context, gfp);
+	else
+		return -ENOBUFS;
+}
+
+/**
+ * fscache_alloc_page - Allocate a block in which to store a page
+ * @cookie: The cookie representing the cache object
+ * @page: The netfs page to allocate a page for
+ * @gfp: The conditions under which memory allocation should be made
+ *
+ * Request Allocation a block in the cache in which to store a netfs page
+ * without retrieving any contents from the cache.
+ *
+ * If the page is not backed by a file then -ENOBUFS will be returned and
+ * nothing more will be done, and no reservation will be made.
+ *
+ * Else, a block will be allocated if one wasn't already, and 0 will be
+ * returned
+ *
+ * See Documentation/filesystems/caching/netfs-api.txt for a complete
+ * description.
+ */
+static inline
+int fscache_alloc_page(struct fscache_cookie *cookie,
+		       struct page *page,
+		       gfp_t gfp)
+{
+	if (fscache_cookie_valid(cookie))
+		return __fscache_alloc_page(cookie, page, gfp);
+	else
+		return -ENOBUFS;
+}
+
+/**
+ * fscache_write_page - Request storage of a page in the cache
+ * @cookie: The cookie representing the cache object
+ * @page: The netfs page to store
+ * @gfp: The conditions under which memory allocation should be made
+ *
+ * Request the contents of the netfs page be written into the cache.  This
+ * request may be ignored if no cache block is currently allocated, in which
+ * case it will return -ENOBUFS.
+ *
+ * If a cache block was already allocated, a write will be initiated and 0 will
+ * be returned.  The PG_fscache_write page bit is set immediately and will then
+ * be cleared at the completion of the write to indicate the success or failure
+ * of the operation.  Note that the completion may happen before the return.
+ *
+ * See Documentation/filesystems/caching/netfs-api.txt for a complete
+ * description.
+ */
+static inline
+int fscache_write_page(struct fscache_cookie *cookie,
+		       struct page *page,
+		       gfp_t gfp)
+{
+	if (fscache_cookie_valid(cookie))
+		return __fscache_write_page(cookie, page, gfp);
+	else
+		return -ENOBUFS;
+}
+
+/**
+ * fscache_uncache_page - Indicate that caching is no longer required on a page
+ * @cookie: The cookie representing the cache object
+ * @page: The netfs page that was being cached.
+ *
+ * Tell the cache that we no longer want a page to be cached and that it should
+ * remove any knowledge of the netfs page it may have.
+ *
+ * Note that this cannot cancel any outstanding I/O operations between this
+ * page and the cache.
+ *
+ * See Documentation/filesystems/caching/netfs-api.txt for a complete
+ * description.
+ */
+static inline
+void fscache_uncache_page(struct fscache_cookie *cookie,
+			  struct page *page)
+{
+	if (fscache_cookie_valid(cookie))
+		__fscache_uncache_page(cookie, page);
+}
+
+/**
+ * fscache_check_page_write - Ask if a page is being writing to the cache
+ * @cookie: The cookie representing the cache object
+ * @page: The netfs page that is being cached.
+ *
+ * Ask the cache if a page is being written to the cache.
+ *
+ * See Documentation/filesystems/caching/netfs-api.txt for a complete
+ * description.
+ */
+static inline
+bool fscache_check_page_write(struct fscache_cookie *cookie,
+			      struct page *page)
+{
+	if (fscache_cookie_valid(cookie))
+		return __fscache_check_page_write(cookie, page);
+	return false;
+}
+
+/**
+ * fscache_wait_on_page_write - Wait for a page to complete writing to the cache
+ * @cookie: The cookie representing the cache object
+ * @page: The netfs page that is being cached.
+ *
+ * Ask the cache to wake us up when a page is no longer being written to the
+ * cache.
+ *
+ * See Documentation/filesystems/caching/netfs-api.txt for a complete
+ * description.
+ */
+static inline
+void fscache_wait_on_page_write(struct fscache_cookie *cookie,
+				struct page *page)
+{
+	if (fscache_cookie_valid(cookie))
+		__fscache_wait_on_page_write(cookie, page);
+}
+
+/**
+ * fscache_maybe_release_page - Consider releasing a page, cancelling a store
+ * @cookie: The cookie representing the cache object
+ * @page: The netfs page that is being cached.
+ * @gfp: The gfp flags passed to releasepage()
+ *
+ * Consider releasing a page for the vmscan algorithm, on behalf of the netfs's
+ * releasepage() call.  A storage request on the page may cancelled if it is
+ * not currently being processed.
+ *
+ * The function returns true if the page no longer has a storage request on it,
+ * and false if a storage request is left in place.  If true is returned, the
+ * page will have been passed to fscache_uncache_page().  If false is returned
+ * the page cannot be freed yet.
+ */
+static inline
+bool fscache_maybe_release_page(struct fscache_cookie *cookie,
+				struct page *page,
+				gfp_t gfp)
+{
+	if (fscache_cookie_valid(cookie) && PageFsCache(page))
+		return __fscache_maybe_release_page(cookie, page, gfp);
+	return false;
+}
+
+/**
+ * fscache_uncache_all_inode_pages - Uncache all an inode's pages
+ * @cookie: The cookie representing the inode's cache object.
+ * @inode: The inode to uncache pages from.
+ *
+ * Uncache all the pages in an inode that are marked PG_fscache, assuming them
+ * to be associated with the given cookie.
+ *
+ * This function may sleep.  It will wait for pages that are being written out
+ * and will wait whilst the PG_fscache mark is removed by the cache.
+ */
+static inline
+void fscache_uncache_all_inode_pages(struct fscache_cookie *cookie,
+				     struct inode *inode)
+{
+	if (fscache_cookie_valid(cookie))
+		__fscache_uncache_all_inode_pages(cookie, inode);
+}
+
+#endif /* _LINUX_FSCACHE_H */
diff --git a/include/linux/fsl-diu-fb.h b/include/linux/fsl-diu-fb.h
new file mode 100644
index 00000000..11c16a1f
--- /dev/null
+++ b/include/linux/fsl-diu-fb.h
@@ -0,0 +1,164 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ *  Freescale DIU Frame Buffer device driver
+ *
+ *  Authors: Hongjun Chen <hong-jun.chen@freescale.com>
+ *           Paul Widmer <paul.widmer@freescale.com>
+ *           Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+ *           York Sun <yorksun@freescale.com>
+ *
+ *   Based on imxfb.c Copyright (C) 2004 S.Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __FSL_DIU_FB_H__
+#define __FSL_DIU_FB_H__
+
+#include <linux/types.h>
+
+struct mfb_chroma_key {
+	int enable;
+	__u8  red_max;
+	__u8  green_max;
+	__u8  blue_max;
+	__u8  red_min;
+	__u8  green_min;
+	__u8  blue_min;
+};
+
+struct aoi_display_offset {
+	__s32 x_aoi_d;
+	__s32 y_aoi_d;
+};
+
+#define MFB_SET_CHROMA_KEY	_IOW('M', 1, struct mfb_chroma_key)
+#define MFB_SET_BRIGHTNESS	_IOW('M', 3, __u8)
+#define MFB_SET_ALPHA		_IOW('M', 0, __u8)
+#define MFB_GET_ALPHA		_IOR('M', 0, __u8)
+#define MFB_SET_AOID		_IOW('M', 4, struct aoi_display_offset)
+#define MFB_GET_AOID		_IOR('M', 4, struct aoi_display_offset)
+#define MFB_SET_PIXFMT		_IOW('M', 8, __u32)
+#define MFB_GET_PIXFMT		_IOR('M', 8, __u32)
+
+/*
+ * The original definitions of MFB_SET_PIXFMT and MFB_GET_PIXFMT used the
+ * wrong value for 'size' field of the ioctl.  The current macros above use the
+ * right size, but we still need to provide backwards compatibility, at least
+ * for a while.
+*/
+#define MFB_SET_PIXFMT_OLD	0x80014d08
+#define MFB_GET_PIXFMT_OLD	0x40014d08
+
+#ifdef __KERNEL__
+
+/*
+ * These are the fields of area descriptor(in DDR memory) for every plane
+ */
+struct diu_ad {
+	/* Word 0(32-bit) in DDR memory */
+/* 	__u16 comp; */
+/* 	__u16 pixel_s:2; */
+/* 	__u16 pallete:1; */
+/* 	__u16 red_c:2; */
+/* 	__u16 green_c:2; */
+/* 	__u16 blue_c:2; */
+/* 	__u16 alpha_c:3; */
+/* 	__u16 byte_f:1; */
+/* 	__u16 res0:3; */
+
+	__be32 pix_fmt; /* hard coding pixel format */
+
+	/* Word 1(32-bit) in DDR memory */
+	__le32 addr;
+
+	/* Word 2(32-bit) in DDR memory */
+/* 	__u32 delta_xs:11; */
+/* 	__u32 res1:1; */
+/* 	__u32 delta_ys:11; */
+/* 	__u32 res2:1; */
+/* 	__u32 g_alpha:8; */
+	__le32 src_size_g_alpha;
+
+	/* Word 3(32-bit) in DDR memory */
+/* 	__u32 delta_xi:11; */
+/* 	__u32 res3:5; */
+/* 	__u32 delta_yi:11; */
+/* 	__u32 res4:3; */
+/* 	__u32 flip:2; */
+	__le32 aoi_size;
+
+	/* Word 4(32-bit) in DDR memory */
+	/*__u32 offset_xi:11;
+	__u32 res5:5;
+	__u32 offset_yi:11;
+	__u32 res6:5;
+	*/
+	__le32 offset_xyi;
+
+	/* Word 5(32-bit) in DDR memory */
+	/*__u32 offset_xd:11;
+	__u32 res7:5;
+	__u32 offset_yd:11;
+	__u32 res8:5; */
+	__le32 offset_xyd;
+
+
+	/* Word 6(32-bit) in DDR memory */
+	__u8 ckmax_r;
+	__u8 ckmax_g;
+	__u8 ckmax_b;
+	__u8 res9;
+
+	/* Word 7(32-bit) in DDR memory */
+	__u8 ckmin_r;
+	__u8 ckmin_g;
+	__u8 ckmin_b;
+	__u8 res10;
+/* 	__u32 res10:8; */
+
+	/* Word 8(32-bit) in DDR memory */
+	__le32 next_ad;
+
+	/* Word 9(32-bit) in DDR memory, just for 64-bit aligned */
+	__u32 paddr;
+} __attribute__ ((packed));
+
+/* DIU register map */
+struct diu {
+	__be32 desc[3];
+	__be32 gamma;
+	__be32 pallete;
+	__be32 cursor;
+	__be32 curs_pos;
+	__be32 diu_mode;
+	__be32 bgnd;
+	__be32 bgnd_wb;
+	__be32 disp_size;
+	__be32 wb_size;
+	__be32 wb_mem_addr;
+	__be32 hsyn_para;
+	__be32 vsyn_para;
+	__be32 syn_pol;
+	__be32 thresholds;
+	__be32 int_status;
+	__be32 int_mask;
+	__be32 colorbar[8];
+	__be32 filling;
+	__be32 plut;
+} __attribute__ ((packed));
+
+/*
+ * Modes of operation of DIU.  The DIU supports five different modes, but
+ * the driver only supports modes 0 and 1.
+ */
+#define MFB_MODE0	0	/* DIU off */
+#define MFB_MODE1	1	/* All three planes output to display */
+
+#endif /* __KERNEL__ */
+#endif /* __FSL_DIU_FB_H__ */
diff --git a/include/linux/fsl/mxs-dma.h b/include/linux/fsl/mxs-dma.h
new file mode 100644
index 00000000..203d7c4a
--- /dev/null
+++ b/include/linux/fsl/mxs-dma.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_MXS_DMA_H__
+#define __MACH_MXS_DMA_H__
+
+#include <linux/dmaengine.h>
+
+struct mxs_dma_data {
+	int chan_irq;
+};
+
+static inline int mxs_dma_is_apbh(struct dma_chan *chan)
+{
+	return !strcmp(dev_name(chan->device->dev), "mxs-dma-apbh");
+}
+
+static inline int mxs_dma_is_apbx(struct dma_chan *chan)
+{
+	return !strcmp(dev_name(chan->device->dev), "mxs-dma-apbx");
+}
+
+#endif /* __MACH_MXS_DMA_H__ */
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
new file mode 100644
index 00000000..fffdf00f
--- /dev/null
+++ b/include/linux/fsl_devices.h
@@ -0,0 +1,138 @@
+/*
+ * include/linux/fsl_devices.h
+ *
+ * Definitions for any platform device related flags or structures for
+ * Freescale processor devices
+ *
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
+ *
+ * Copyright 2004 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef _FSL_DEVICE_H_
+#define _FSL_DEVICE_H_
+
+#include <linux/types.h>
+
+/*
+ * Some conventions on how we handle peripherals on Freescale chips
+ *
+ * unique device: a platform_device entry in fsl_plat_devs[] plus
+ * associated device information in its platform_data structure.
+ *
+ * A chip is described by a set of unique devices.
+ *
+ * Each sub-arch has its own master list of unique devices and
+ * enumerates them by enum fsl_devices in a sub-arch specific header
+ *
+ * The platform data structure is broken into two parts.  The
+ * first is device specific information that help identify any
+ * unique features of a peripheral.  The second is any
+ * information that may be defined by the board or how the device
+ * is connected externally of the chip.
+ *
+ * naming conventions:
+ * - platform data structures: <driver>_platform_data
+ * - platform data device flags: FSL_<driver>_DEV_<FLAG>
+ * - platform data board flags: FSL_<driver>_BRD_<FLAG>
+ *
+ */
+
+enum fsl_usb2_operating_modes {
+	FSL_USB2_MPH_HOST,
+	FSL_USB2_DR_HOST,
+	FSL_USB2_DR_DEVICE,
+	FSL_USB2_DR_OTG,
+};
+
+enum fsl_usb2_phy_modes {
+	FSL_USB2_PHY_NONE,
+	FSL_USB2_PHY_ULPI,
+	FSL_USB2_PHY_UTMI,
+	FSL_USB2_PHY_UTMI_WIDE,
+	FSL_USB2_PHY_SERIAL,
+};
+
+struct clk;
+struct platform_device;
+
+struct fsl_usb2_platform_data {
+	/* board specific information */
+	enum fsl_usb2_operating_modes	operating_mode;
+	enum fsl_usb2_phy_modes		phy_mode;
+	unsigned int			port_enables;
+	unsigned int			workaround;
+
+	int		(*init)(struct platform_device *);
+	void		(*exit)(struct platform_device *);
+	void __iomem	*regs;		/* ioremap'd register base */
+	struct clk	*clk;
+	unsigned	power_budget;	/* hcd->power_budget */
+	unsigned	big_endian_mmio:1;
+	unsigned	big_endian_desc:1;
+	unsigned	es:1;		/* need USBMODE:ES */
+	unsigned	le_setup_buf:1;
+	unsigned	have_sysif_regs:1;
+	unsigned	invert_drvvbus:1;
+	unsigned	invert_pwr_fault:1;
+
+	unsigned	suspended:1;
+	unsigned	already_suspended:1;
+
+	/* register save area for suspend/resume */
+	u32		pm_command;
+	u32		pm_status;
+	u32		pm_intr_enable;
+	u32		pm_frame_index;
+	u32		pm_segment;
+	u32		pm_frame_list;
+	u32		pm_async_next;
+	u32		pm_configured_flag;
+	u32		pm_portsc;
+	u32		pm_usbgenctrl;
+};
+
+/* Flags in fsl_usb2_mph_platform_data */
+#define FSL_USB2_PORT0_ENABLED	0x00000001
+#define FSL_USB2_PORT1_ENABLED	0x00000002
+
+#define FLS_USB2_WORKAROUND_ENGCM09152	(1 << 0)
+
+struct spi_device;
+
+struct fsl_spi_platform_data {
+	u32 	initial_spmode;	/* initial SPMODE value */
+	s16	bus_num;
+	unsigned int flags;
+#define SPI_QE_CPU_MODE		(1 << 0) /* QE CPU ("PIO") mode */
+#define SPI_CPM_MODE		(1 << 1) /* CPM/QE ("DMA") mode */
+#define SPI_CPM1		(1 << 2) /* SPI unit is in CPM1 block */
+#define SPI_CPM2		(1 << 3) /* SPI unit is in CPM2 block */
+#define SPI_QE			(1 << 4) /* SPI unit is in QE block */
+	/* board specific information */
+	u16	max_chipselect;
+	void	(*cs_control)(struct spi_device *spi, bool on);
+	u32	sysclk;
+};
+
+struct mpc8xx_pcmcia_ops {
+	void(*hw_ctrl)(int slot, int enable);
+	int(*voltage_set)(int slot, int vcc, int vpp);
+};
+
+/* Returns non-zero if the current suspend operation would
+ * lead to a deep sleep (i.e. power removed from the core,
+ * instead of just the clock).
+ */
+#if defined(CONFIG_PPC_83xx) && defined(CONFIG_SUSPEND)
+int fsl_deep_sleep(void);
+#else
+static inline int fsl_deep_sleep(void) { return 0; }
+#endif
+
+#endif /* _FSL_DEVICE_H_ */
diff --git a/include/linux/fsl_hypervisor.h b/include/linux/fsl_hypervisor.h
new file mode 100644
index 00000000..1cebaeee
--- /dev/null
+++ b/include/linux/fsl_hypervisor.h
@@ -0,0 +1,241 @@
+/*
+ * Freescale hypervisor ioctl and kernel interface
+ *
+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc.
+ * Author: Timur Tabi <timur@freescale.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of this
+ * software, even if advised of the possibility of such damage.
+ *
+ * This file is used by the Freescale hypervisor management driver.  It can
+ * also be included by applications that need to communicate with the driver
+ * via the ioctl interface.
+ */
+
+#ifndef FSL_HYPERVISOR_H
+#define FSL_HYPERVISOR_H
+
+#include <linux/types.h>
+
+/**
+ * struct fsl_hv_ioctl_restart - restart a partition
+ * @ret: return error code from the hypervisor
+ * @partition: the ID of the partition to restart, or -1 for the
+ *             calling partition
+ *
+ * Used by FSL_HV_IOCTL_PARTITION_RESTART
+ */
+struct fsl_hv_ioctl_restart {
+	__u32 ret;
+	__u32 partition;
+};
+
+/**
+ * struct fsl_hv_ioctl_status - get a partition's status
+ * @ret: return error code from the hypervisor
+ * @partition: the ID of the partition to query, or -1 for the
+ *             calling partition
+ * @status: The returned status of the partition
+ *
+ * Used by FSL_HV_IOCTL_PARTITION_GET_STATUS
+ *
+ * Values of 'status':
+ *    0 = Stopped
+ *    1 = Running
+ *    2 = Starting
+ *    3 = Stopping
+ */
+struct fsl_hv_ioctl_status {
+	__u32 ret;
+	__u32 partition;
+	__u32 status;
+};
+
+/**
+ * struct fsl_hv_ioctl_start - start a partition
+ * @ret: return error code from the hypervisor
+ * @partition: the ID of the partition to control
+ * @entry_point: The offset within the guest IMA to start execution
+ * @load: If non-zero, reload the partition's images before starting
+ *
+ * Used by FSL_HV_IOCTL_PARTITION_START
+ */
+struct fsl_hv_ioctl_start {
+	__u32 ret;
+	__u32 partition;
+	__u32 entry_point;
+	__u32 load;
+};
+
+/**
+ * struct fsl_hv_ioctl_stop - stop a partition
+ * @ret: return error code from the hypervisor
+ * @partition: the ID of the partition to stop, or -1 for the calling
+ *             partition
+ *
+ * Used by FSL_HV_IOCTL_PARTITION_STOP
+ */
+struct fsl_hv_ioctl_stop {
+	__u32 ret;
+	__u32 partition;
+};
+
+/**
+ * struct fsl_hv_ioctl_memcpy - copy memory between partitions
+ * @ret: return error code from the hypervisor
+ * @source: the partition ID of the source partition, or -1 for this
+ *          partition
+ * @target: the partition ID of the target partition, or -1 for this
+ *          partition
+ * @reserved: reserved, must be set to 0
+ * @local_addr: user-space virtual address of a buffer in the local
+ *              partition
+ * @remote_addr: guest physical address of a buffer in the
+ *           remote partition
+ * @count: the number of bytes to copy.  Both the local and remote
+ *         buffers must be at least 'count' bytes long
+ *
+ * Used by FSL_HV_IOCTL_MEMCPY
+ *
+ * The 'local' partition is the partition that calls this ioctl.  The
+ * 'remote' partition is a different partition.  The data is copied from
+ * the 'source' paritition' to the 'target' partition.
+ *
+ * The buffer in the remote partition must be guest physically
+ * contiguous.
+ *
+ * This ioctl does not support copying memory between two remote
+ * partitions or within the same partition, so either 'source' or
+ * 'target' (but not both) must be -1.  In other words, either
+ *
+ *      source == local and target == remote
+ * or
+ *      source == remote and target == local
+ */
+struct fsl_hv_ioctl_memcpy {
+	__u32 ret;
+	__u32 source;
+	__u32 target;
+	__u32 reserved;	/* padding to ensure local_vaddr is aligned */
+	__u64 local_vaddr;
+	__u64 remote_paddr;
+	__u64 count;
+};
+
+/**
+ * struct fsl_hv_ioctl_doorbell - ring a doorbell
+ * @ret: return error code from the hypervisor
+ * @doorbell: the handle of the doorbell to ring doorbell
+ *
+ * Used by FSL_HV_IOCTL_DOORBELL
+ */
+struct fsl_hv_ioctl_doorbell {
+	__u32 ret;
+	__u32 doorbell;
+};
+
+/**
+ * struct fsl_hv_ioctl_prop - get/set a device tree property
+ * @ret: return error code from the hypervisor
+ * @handle: handle of partition whose tree to access
+ * @path: virtual address of path name of node to access
+ * @propname: virtual address of name of property to access
+ * @propval: virtual address of property data buffer
+ * @proplen: Size of property data buffer
+ * @reserved: reserved, must be set to 0
+ *
+ * Used by FSL_HV_IOCTL_DOORBELL
+ */
+struct fsl_hv_ioctl_prop {
+	__u32 ret;
+	__u32 handle;
+	__u64 path;
+	__u64 propname;
+	__u64 propval;
+	__u32 proplen;
+	__u32 reserved;	/* padding to ensure structure is aligned */
+};
+
+/* The ioctl type, documented in ioctl-number.txt */
+#define FSL_HV_IOCTL_TYPE	0xAF
+
+/* Restart another partition */
+#define FSL_HV_IOCTL_PARTITION_RESTART \
+	_IOWR(FSL_HV_IOCTL_TYPE, 1, struct fsl_hv_ioctl_restart)
+
+/* Get a partition's status */
+#define FSL_HV_IOCTL_PARTITION_GET_STATUS \
+	_IOWR(FSL_HV_IOCTL_TYPE, 2, struct fsl_hv_ioctl_status)
+
+/* Boot another partition */
+#define FSL_HV_IOCTL_PARTITION_START \
+	_IOWR(FSL_HV_IOCTL_TYPE, 3, struct fsl_hv_ioctl_start)
+
+/* Stop this or another partition */
+#define FSL_HV_IOCTL_PARTITION_STOP \
+	_IOWR(FSL_HV_IOCTL_TYPE, 4, struct fsl_hv_ioctl_stop)
+
+/* Copy data from one partition to another */
+#define FSL_HV_IOCTL_MEMCPY \
+	_IOWR(FSL_HV_IOCTL_TYPE, 5, struct fsl_hv_ioctl_memcpy)
+
+/* Ring a doorbell */
+#define FSL_HV_IOCTL_DOORBELL \
+	_IOWR(FSL_HV_IOCTL_TYPE, 6, struct fsl_hv_ioctl_doorbell)
+
+/* Get a property from another guest's device tree */
+#define FSL_HV_IOCTL_GETPROP \
+	_IOWR(FSL_HV_IOCTL_TYPE, 7, struct fsl_hv_ioctl_prop)
+
+/* Set a property in another guest's device tree */
+#define FSL_HV_IOCTL_SETPROP \
+	_IOWR(FSL_HV_IOCTL_TYPE, 8, struct fsl_hv_ioctl_prop)
+
+#ifdef __KERNEL__
+
+/**
+ * fsl_hv_event_register() - register a callback for failover events
+ * @nb: pointer to caller-supplied notifier_block structure
+ *
+ * This function is called by device drivers to register their callback
+ * functions for fail-over events.
+ *
+ * The caller should allocate a notifier_block object and initialize the
+ * 'priority' and 'notifier_call' fields.
+ */
+int fsl_hv_failover_register(struct notifier_block *nb);
+
+/**
+ * fsl_hv_event_unregister() - unregister a callback for failover events
+ * @nb: the same 'nb' used in previous fsl_hv_failover_register call
+ */
+int fsl_hv_failover_unregister(struct notifier_block *nb);
+
+#endif
+
+#endif
diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h
new file mode 100644
index 00000000..a6dfe694
--- /dev/null
+++ b/include/linux/fsnotify.h
@@ -0,0 +1,342 @@
+#ifndef _LINUX_FS_NOTIFY_H
+#define _LINUX_FS_NOTIFY_H
+
+/*
+ * include/linux/fsnotify.h - generic hooks for filesystem notification, to
+ * reduce in-source duplication from both dnotify and inotify.
+ *
+ * We don't compile any of this away in some complicated menagerie of ifdefs.
+ * Instead, we rely on the code inside to optimize away as needed.
+ *
+ * (C) Copyright 2005 Robert Love
+ */
+
+#include <linux/fsnotify_backend.h>
+#include <linux/audit.h>
+#include <linux/slab.h>
+#include <linux/bug.h>
+
+/*
+ * fsnotify_d_instantiate - instantiate a dentry for inode
+ */
+static inline void fsnotify_d_instantiate(struct dentry *dentry,
+					  struct inode *inode)
+{
+	__fsnotify_d_instantiate(dentry, inode);
+}
+
+/* Notify this dentry's parent about a child's events. */
+static inline int fsnotify_parent(struct path *path, struct dentry *dentry, __u32 mask)
+{
+	if (!dentry)
+		dentry = path->dentry;
+
+	return __fsnotify_parent(path, dentry, mask);
+}
+
+/* simple call site for access decisions */
+static inline int fsnotify_perm(struct file *file, int mask)
+{
+	struct path *path = &file->f_path;
+	struct inode *inode = path->dentry->d_inode;
+	__u32 fsnotify_mask = 0;
+	int ret;
+
+	if (file->f_mode & FMODE_NONOTIFY)
+		return 0;
+	if (!(mask & (MAY_READ | MAY_OPEN)))
+		return 0;
+	if (mask & MAY_OPEN)
+		fsnotify_mask = FS_OPEN_PERM;
+	else if (mask & MAY_READ)
+		fsnotify_mask = FS_ACCESS_PERM;
+	else
+		BUG();
+
+	ret = fsnotify_parent(path, NULL, fsnotify_mask);
+	if (ret)
+		return ret;
+
+	return fsnotify(inode, fsnotify_mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
+}
+
+/*
+ * fsnotify_d_move - dentry has been moved
+ */
+static inline void fsnotify_d_move(struct dentry *dentry)
+{
+	/*
+	 * On move we need to update dentry->d_flags to indicate if the new parent
+	 * cares about events from this dentry.
+	 */
+	__fsnotify_update_dcache_flags(dentry);
+}
+
+/*
+ * fsnotify_link_count - inode's link count changed
+ */
+static inline void fsnotify_link_count(struct inode *inode)
+{
+	fsnotify(inode, FS_ATTRIB, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
+}
+
+/*
+ * fsnotify_move - file old_name at old_dir was moved to new_name at new_dir
+ */
+static inline void fsnotify_move(struct inode *old_dir, struct inode *new_dir,
+				 const unsigned char *old_name,
+				 int isdir, struct inode *target, struct dentry *moved)
+{
+	struct inode *source = moved->d_inode;
+	u32 fs_cookie = fsnotify_get_cookie();
+	__u32 old_dir_mask = (FS_EVENT_ON_CHILD | FS_MOVED_FROM);
+	__u32 new_dir_mask = (FS_EVENT_ON_CHILD | FS_MOVED_TO);
+	const unsigned char *new_name = moved->d_name.name;
+
+	if (old_dir == new_dir)
+		old_dir_mask |= FS_DN_RENAME;
+
+	if (isdir) {
+		old_dir_mask |= FS_ISDIR;
+		new_dir_mask |= FS_ISDIR;
+	}
+
+	fsnotify(old_dir, old_dir_mask, old_dir, FSNOTIFY_EVENT_INODE, old_name, fs_cookie);
+	fsnotify(new_dir, new_dir_mask, new_dir, FSNOTIFY_EVENT_INODE, new_name, fs_cookie);
+
+	if (target)
+		fsnotify_link_count(target);
+
+	if (source)
+		fsnotify(source, FS_MOVE_SELF, moved->d_inode, FSNOTIFY_EVENT_INODE, NULL, 0);
+	audit_inode_child(moved, new_dir);
+}
+
+/*
+ * fsnotify_inode_delete - and inode is being evicted from cache, clean up is needed
+ */
+static inline void fsnotify_inode_delete(struct inode *inode)
+{
+	__fsnotify_inode_delete(inode);
+}
+
+/*
+ * fsnotify_vfsmount_delete - a vfsmount is being destroyed, clean up is needed
+ */
+static inline void fsnotify_vfsmount_delete(struct vfsmount *mnt)
+{
+	__fsnotify_vfsmount_delete(mnt);
+}
+
+/*
+ * fsnotify_nameremove - a filename was removed from a directory
+ */
+static inline void fsnotify_nameremove(struct dentry *dentry, int isdir)
+{
+	__u32 mask = FS_DELETE;
+
+	if (isdir)
+		mask |= FS_ISDIR;
+
+	fsnotify_parent(NULL, dentry, mask);
+}
+
+/*
+ * fsnotify_inoderemove - an inode is going away
+ */
+static inline void fsnotify_inoderemove(struct inode *inode)
+{
+	fsnotify(inode, FS_DELETE_SELF, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
+	__fsnotify_inode_delete(inode);
+}
+
+/*
+ * fsnotify_create - 'name' was linked in
+ */
+static inline void fsnotify_create(struct inode *inode, struct dentry *dentry)
+{
+	audit_inode_child(dentry, inode);
+
+	fsnotify(inode, FS_CREATE, dentry->d_inode, FSNOTIFY_EVENT_INODE, dentry->d_name.name, 0);
+}
+
+/*
+ * fsnotify_link - new hardlink in 'inode' directory
+ * Note: We have to pass also the linked inode ptr as some filesystems leave
+ *   new_dentry->d_inode NULL and instantiate inode pointer later
+ */
+static inline void fsnotify_link(struct inode *dir, struct inode *inode, struct dentry *new_dentry)
+{
+	fsnotify_link_count(inode);
+	audit_inode_child(new_dentry, dir);
+
+	fsnotify(dir, FS_CREATE, inode, FSNOTIFY_EVENT_INODE, new_dentry->d_name.name, 0);
+}
+
+/*
+ * fsnotify_mkdir - directory 'name' was created
+ */
+static inline void fsnotify_mkdir(struct inode *inode, struct dentry *dentry)
+{
+	__u32 mask = (FS_CREATE | FS_ISDIR);
+	struct inode *d_inode = dentry->d_inode;
+
+	audit_inode_child(dentry, inode);
+
+	fsnotify(inode, mask, d_inode, FSNOTIFY_EVENT_INODE, dentry->d_name.name, 0);
+}
+
+/*
+ * fsnotify_access - file was read
+ */
+static inline void fsnotify_access(struct file *file)
+{
+	struct path *path = &file->f_path;
+	struct inode *inode = path->dentry->d_inode;
+	__u32 mask = FS_ACCESS;
+
+	if (S_ISDIR(inode->i_mode))
+		mask |= FS_ISDIR;
+
+	if (!(file->f_mode & FMODE_NONOTIFY)) {
+		fsnotify_parent(path, NULL, mask);
+		fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
+	}
+}
+
+/*
+ * fsnotify_modify - file was modified
+ */
+static inline void fsnotify_modify(struct file *file)
+{
+	struct path *path = &file->f_path;
+	struct inode *inode = path->dentry->d_inode;
+	__u32 mask = FS_MODIFY;
+
+	if (S_ISDIR(inode->i_mode))
+		mask |= FS_ISDIR;
+
+	if (!(file->f_mode & FMODE_NONOTIFY)) {
+		fsnotify_parent(path, NULL, mask);
+		fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
+	}
+}
+
+/*
+ * fsnotify_open - file was opened
+ */
+static inline void fsnotify_open(struct file *file)
+{
+	struct path *path = &file->f_path;
+	struct inode *inode = path->dentry->d_inode;
+	__u32 mask = FS_OPEN;
+
+	if (S_ISDIR(inode->i_mode))
+		mask |= FS_ISDIR;
+
+	fsnotify_parent(path, NULL, mask);
+	fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
+}
+
+/*
+ * fsnotify_close - file was closed
+ */
+static inline void fsnotify_close(struct file *file)
+{
+	struct path *path = &file->f_path;
+	struct inode *inode = file->f_path.dentry->d_inode;
+	fmode_t mode = file->f_mode;
+	__u32 mask = (mode & FMODE_WRITE) ? FS_CLOSE_WRITE : FS_CLOSE_NOWRITE;
+
+	if (S_ISDIR(inode->i_mode))
+		mask |= FS_ISDIR;
+
+	if (!(file->f_mode & FMODE_NONOTIFY)) {
+		fsnotify_parent(path, NULL, mask);
+		fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
+	}
+}
+
+/*
+ * fsnotify_xattr - extended attributes were changed
+ */
+static inline void fsnotify_xattr(struct dentry *dentry)
+{
+	struct inode *inode = dentry->d_inode;
+	__u32 mask = FS_ATTRIB;
+
+	if (S_ISDIR(inode->i_mode))
+		mask |= FS_ISDIR;
+
+	fsnotify_parent(NULL, dentry, mask);
+	fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
+}
+
+/*
+ * fsnotify_change - notify_change event.  file was modified and/or metadata
+ * was changed.
+ */
+static inline void fsnotify_change(struct dentry *dentry, unsigned int ia_valid)
+{
+	struct inode *inode = dentry->d_inode;
+	__u32 mask = 0;
+
+	if (ia_valid & ATTR_UID)
+		mask |= FS_ATTRIB;
+	if (ia_valid & ATTR_GID)
+		mask |= FS_ATTRIB;
+	if (ia_valid & ATTR_SIZE)
+		mask |= FS_MODIFY;
+
+	/* both times implies a utime(s) call */
+	if ((ia_valid & (ATTR_ATIME | ATTR_MTIME)) == (ATTR_ATIME | ATTR_MTIME))
+		mask |= FS_ATTRIB;
+	else if (ia_valid & ATTR_ATIME)
+		mask |= FS_ACCESS;
+	else if (ia_valid & ATTR_MTIME)
+		mask |= FS_MODIFY;
+
+	if (ia_valid & ATTR_MODE)
+		mask |= FS_ATTRIB;
+
+	if (mask) {
+		if (S_ISDIR(inode->i_mode))
+			mask |= FS_ISDIR;
+
+		fsnotify_parent(NULL, dentry, mask);
+		fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
+	}
+}
+
+#if defined(CONFIG_FSNOTIFY)	/* notify helpers */
+
+/*
+ * fsnotify_oldname_init - save off the old filename before we change it
+ */
+static inline const unsigned char *fsnotify_oldname_init(const unsigned char *name)
+{
+	return kstrdup(name, GFP_KERNEL);
+}
+
+/*
+ * fsnotify_oldname_free - free the name we got from fsnotify_oldname_init
+ */
+static inline void fsnotify_oldname_free(const unsigned char *old_name)
+{
+	kfree(old_name);
+}
+
+#else	/* CONFIG_FSNOTIFY */
+
+static inline const char *fsnotify_oldname_init(const unsigned char *name)
+{
+	return NULL;
+}
+
+static inline void fsnotify_oldname_free(const unsigned char *old_name)
+{
+}
+
+#endif	/*  CONFIG_FSNOTIFY */
+
+#endif	/* _LINUX_FS_NOTIFY_H */
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
new file mode 100644
index 00000000..91d0e0a3
--- /dev/null
+++ b/include/linux/fsnotify_backend.h
@@ -0,0 +1,470 @@
+/*
+ * Filesystem access notification for Linux
+ *
+ *  Copyright (C) 2008 Red Hat, Inc., Eric Paris <eparis@redhat.com>
+ */
+
+#ifndef __LINUX_FSNOTIFY_BACKEND_H
+#define __LINUX_FSNOTIFY_BACKEND_H
+
+#ifdef __KERNEL__
+
+#include <linux/idr.h> /* inotify uses this */
+#include <linux/fs.h> /* struct inode */
+#include <linux/list.h>
+#include <linux/path.h> /* struct path */
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include <linux/atomic.h>
+
+/*
+ * IN_* from inotfy.h lines up EXACTLY with FS_*, this is so we can easily
+ * convert between them.  dnotify only needs conversion at watch creation
+ * so no perf loss there.  fanotify isn't defined yet, so it can use the
+ * wholes if it needs more events.
+ */
+#define FS_ACCESS		0x00000001	/* File was accessed */
+#define FS_MODIFY		0x00000002	/* File was modified */
+#define FS_ATTRIB		0x00000004	/* Metadata changed */
+#define FS_CLOSE_WRITE		0x00000008	/* Writtable file was closed */
+#define FS_CLOSE_NOWRITE	0x00000010	/* Unwrittable file closed */
+#define FS_OPEN			0x00000020	/* File was opened */
+#define FS_MOVED_FROM		0x00000040	/* File was moved from X */
+#define FS_MOVED_TO		0x00000080	/* File was moved to Y */
+#define FS_CREATE		0x00000100	/* Subfile was created */
+#define FS_DELETE		0x00000200	/* Subfile was deleted */
+#define FS_DELETE_SELF		0x00000400	/* Self was deleted */
+#define FS_MOVE_SELF		0x00000800	/* Self was moved */
+
+#define FS_UNMOUNT		0x00002000	/* inode on umount fs */
+#define FS_Q_OVERFLOW		0x00004000	/* Event queued overflowed */
+#define FS_IN_IGNORED		0x00008000	/* last inotify event here */
+
+#define FS_OPEN_PERM		0x00010000	/* open event in an permission hook */
+#define FS_ACCESS_PERM		0x00020000	/* access event in a permissions hook */
+
+#define FS_EXCL_UNLINK		0x04000000	/* do not send events if object is unlinked */
+#define FS_ISDIR		0x40000000	/* event occurred against dir */
+#define FS_IN_ONESHOT		0x80000000	/* only send event once */
+
+#define FS_DN_RENAME		0x10000000	/* file renamed */
+#define FS_DN_MULTISHOT		0x20000000	/* dnotify multishot */
+
+/* This inode cares about things that happen to its children.  Always set for
+ * dnotify and inotify. */
+#define FS_EVENT_ON_CHILD	0x08000000
+
+/* This is a list of all events that may get sent to a parernt based on fs event
+ * happening to inodes inside that directory */
+#define FS_EVENTS_POSS_ON_CHILD   (FS_ACCESS | FS_MODIFY | FS_ATTRIB |\
+				   FS_CLOSE_WRITE | FS_CLOSE_NOWRITE | FS_OPEN |\
+				   FS_MOVED_FROM | FS_MOVED_TO | FS_CREATE |\
+				   FS_DELETE)
+
+#define FS_MOVE			(FS_MOVED_FROM | FS_MOVED_TO)
+
+#define ALL_FSNOTIFY_PERM_EVENTS (FS_OPEN_PERM | FS_ACCESS_PERM)
+
+#define ALL_FSNOTIFY_EVENTS (FS_ACCESS | FS_MODIFY | FS_ATTRIB | \
+			     FS_CLOSE_WRITE | FS_CLOSE_NOWRITE | FS_OPEN | \
+			     FS_MOVED_FROM | FS_MOVED_TO | FS_CREATE | \
+			     FS_DELETE | FS_DELETE_SELF | FS_MOVE_SELF | \
+			     FS_UNMOUNT | FS_Q_OVERFLOW | FS_IN_IGNORED | \
+			     FS_OPEN_PERM | FS_ACCESS_PERM | FS_EXCL_UNLINK | \
+			     FS_ISDIR | FS_IN_ONESHOT | FS_DN_RENAME | \
+			     FS_DN_MULTISHOT | FS_EVENT_ON_CHILD)
+
+struct fsnotify_group;
+struct fsnotify_event;
+struct fsnotify_mark;
+struct fsnotify_event_private_data;
+
+/*
+ * Each group much define these ops.  The fsnotify infrastructure will call
+ * these operations for each relevant group.
+ *
+ * should_send_event - given a group, inode, and mask this function determines
+ *		if the group is interested in this event.
+ * handle_event - main call for a group to handle an fs event
+ * free_group_priv - called when a group refcnt hits 0 to clean up the private union
+ * freeing-mark - this means that a mark has been flagged to die when everything
+ *		finishes using it.  The function is supplied with what must be a
+ *		valid group and inode to use to clean up.
+ */
+struct fsnotify_ops {
+	bool (*should_send_event)(struct fsnotify_group *group, struct inode *inode,
+				  struct fsnotify_mark *inode_mark,
+				  struct fsnotify_mark *vfsmount_mark,
+				  __u32 mask, void *data, int data_type);
+	int (*handle_event)(struct fsnotify_group *group,
+			    struct fsnotify_mark *inode_mark,
+			    struct fsnotify_mark *vfsmount_mark,
+			    struct fsnotify_event *event);
+	void (*free_group_priv)(struct fsnotify_group *group);
+	void (*freeing_mark)(struct fsnotify_mark *mark, struct fsnotify_group *group);
+	void (*free_event_priv)(struct fsnotify_event_private_data *priv);
+};
+
+/*
+ * A group is a "thing" that wants to receive notification about filesystem
+ * events.  The mask holds the subset of event types this group cares about.
+ * refcnt on a group is up to the implementor and at any moment if it goes 0
+ * everything will be cleaned up.
+ */
+struct fsnotify_group {
+	/*
+	 * How the refcnt is used is up to each group.  When the refcnt hits 0
+	 * fsnotify will clean up all of the resources associated with this group.
+	 * As an example, the dnotify group will always have a refcnt=1 and that
+	 * will never change.  Inotify, on the other hand, has a group per
+	 * inotify_init() and the refcnt will hit 0 only when that fd has been
+	 * closed.
+	 */
+	atomic_t refcnt;		/* things with interest in this group */
+
+	const struct fsnotify_ops *ops;	/* how this group handles things */
+
+	/* needed to send notification to userspace */
+	struct mutex notification_mutex;	/* protect the notification_list */
+	struct list_head notification_list;	/* list of event_holder this group needs to send to userspace */
+	wait_queue_head_t notification_waitq;	/* read() on the notification file blocks on this waitq */
+	unsigned int q_len;			/* events on the queue */
+	unsigned int max_events;		/* maximum events allowed on the list */
+	/*
+	 * Valid fsnotify group priorities.  Events are send in order from highest
+	 * priority to lowest priority.  We default to the lowest priority.
+	 */
+	#define FS_PRIO_0	0 /* normal notifiers, no permissions */
+	#define FS_PRIO_1	1 /* fanotify content based access control */
+	#define FS_PRIO_2	2 /* fanotify pre-content access */
+	unsigned int priority;
+
+	/* stores all fastpath marks assoc with this group so they can be cleaned on unregister */
+	spinlock_t mark_lock;		/* protect marks_list */
+	atomic_t num_marks;		/* 1 for each mark and 1 for not being
+					 * past the point of no return when freeing
+					 * a group */
+	struct list_head marks_list;	/* all inode marks for this group */
+
+	/* groups can define private fields here or use the void *private */
+	union {
+		void *private;
+#ifdef CONFIG_INOTIFY_USER
+		struct inotify_group_private_data {
+			spinlock_t	idr_lock;
+			struct idr      idr;
+			u32             last_wd;
+			struct fasync_struct    *fa;    /* async notification */
+			struct user_struct      *user;
+		} inotify_data;
+#endif
+#ifdef CONFIG_FANOTIFY
+		struct fanotify_group_private_data {
+#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
+			/* allows a group to block waiting for a userspace response */
+			struct mutex access_mutex;
+			struct list_head access_list;
+			wait_queue_head_t access_waitq;
+			atomic_t bypass_perm;
+#endif /* CONFIG_FANOTIFY_ACCESS_PERMISSIONS */
+			int f_flags;
+			unsigned int max_marks;
+			struct user_struct *user;
+		} fanotify_data;
+#endif /* CONFIG_FANOTIFY */
+	};
+};
+
+/*
+ * A single event can be queued in multiple group->notification_lists.
+ *
+ * each group->notification_list will point to an event_holder which in turns points
+ * to the actual event that needs to be sent to userspace.
+ *
+ * Seemed cheaper to create a refcnt'd event and a small holder for every group
+ * than create a different event for every group
+ *
+ */
+struct fsnotify_event_holder {
+	struct fsnotify_event *event;
+	struct list_head event_list;
+};
+
+/*
+ * Inotify needs to tack data onto an event.  This struct lets us later find the
+ * correct private data of the correct group.
+ */
+struct fsnotify_event_private_data {
+	struct fsnotify_group *group;
+	struct list_head event_list;
+};
+
+/*
+ * all of the information about the original object we want to now send to
+ * a group.  If you want to carry more info from the accessing task to the
+ * listener this structure is where you need to be adding fields.
+ */
+struct fsnotify_event {
+	/*
+	 * If we create an event we are also likely going to need a holder
+	 * to link to a group.  So embed one holder in the event.  Means only
+	 * one allocation for the common case where we only have one group
+	 */
+	struct fsnotify_event_holder holder;
+	spinlock_t lock;	/* protection for the associated event_holder and private_list */
+	/* to_tell may ONLY be dereferenced during handle_event(). */
+	struct inode *to_tell;	/* either the inode the event happened to or its parent */
+	/*
+	 * depending on the event type we should have either a path or inode
+	 * We hold a reference on path, but NOT on inode.  Since we have the ref on
+	 * the path, it may be dereferenced at any point during this object's
+	 * lifetime.  That reference is dropped when this object's refcnt hits
+	 * 0.  If this event contains an inode instead of a path, the inode may
+	 * ONLY be used during handle_event().
+	 */
+	union {
+		struct path path;
+		struct inode *inode;
+	};
+/* when calling fsnotify tell it if the data is a path or inode */
+#define FSNOTIFY_EVENT_NONE	0
+#define FSNOTIFY_EVENT_PATH	1
+#define FSNOTIFY_EVENT_INODE	2
+	int data_type;		/* which of the above union we have */
+	atomic_t refcnt;	/* how many groups still are using/need to send this event */
+	__u32 mask;		/* the type of access, bitwise OR for FS_* event types */
+
+	u32 sync_cookie;	/* used to corrolate events, namely inotify mv events */
+	const unsigned char *file_name;
+	size_t name_len;
+	struct pid *tgid;
+
+#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
+	__u32 response;	/* userspace answer to question */
+#endif /* CONFIG_FANOTIFY_ACCESS_PERMISSIONS */
+
+	struct list_head private_data_list;	/* groups can store private data here */
+};
+
+/*
+ * Inode specific fields in an fsnotify_mark
+ */
+struct fsnotify_inode_mark {
+	struct inode *inode;		/* inode this mark is associated with */
+	struct hlist_node i_list;	/* list of marks by inode->i_fsnotify_marks */
+	struct list_head free_i_list;	/* tmp list used when freeing this mark */
+};
+
+/*
+ * Mount point specific fields in an fsnotify_mark
+ */
+struct fsnotify_vfsmount_mark {
+	struct vfsmount *mnt;		/* vfsmount this mark is associated with */
+	struct hlist_node m_list;	/* list of marks by inode->i_fsnotify_marks */
+	struct list_head free_m_list;	/* tmp list used when freeing this mark */
+};
+
+/*
+ * a mark is simply an object attached to an in core inode which allows an
+ * fsnotify listener to indicate they are either no longer interested in events
+ * of a type matching mask or only interested in those events.
+ *
+ * these are flushed when an inode is evicted from core and may be flushed
+ * when the inode is modified (as seen by fsnotify_access).  Some fsnotify users
+ * (such as dnotify) will flush these when the open fd is closed and not at
+ * inode eviction or modification.
+ */
+struct fsnotify_mark {
+	__u32 mask;			/* mask this mark is for */
+	/* we hold ref for each i_list and g_list.  also one ref for each 'thing'
+	 * in kernel that found and may be using this mark. */
+	atomic_t refcnt;		/* active things looking at this mark */
+	struct fsnotify_group *group;	/* group this mark is for */
+	struct list_head g_list;	/* list of marks by group->i_fsnotify_marks */
+	spinlock_t lock;		/* protect group and inode */
+	union {
+		struct fsnotify_inode_mark i;
+		struct fsnotify_vfsmount_mark m;
+	};
+	struct list_head free_g_list;	/* tmp list used when freeing this mark */
+	__u32 ignored_mask;		/* events types to ignore */
+#define FSNOTIFY_MARK_FLAG_INODE		0x01
+#define FSNOTIFY_MARK_FLAG_VFSMOUNT		0x02
+#define FSNOTIFY_MARK_FLAG_OBJECT_PINNED	0x04
+#define FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY	0x08
+#define FSNOTIFY_MARK_FLAG_ALIVE		0x10
+	unsigned int flags;		/* vfsmount or inode mark? */
+	struct list_head destroy_list;
+	void (*free_mark)(struct fsnotify_mark *mark); /* called on final put+free */
+};
+
+#ifdef CONFIG_FSNOTIFY
+
+/* called from the vfs helpers */
+
+/* main fsnotify call to send events */
+extern int fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
+		    const unsigned char *name, u32 cookie);
+extern int __fsnotify_parent(struct path *path, struct dentry *dentry, __u32 mask);
+extern void __fsnotify_inode_delete(struct inode *inode);
+extern void __fsnotify_vfsmount_delete(struct vfsmount *mnt);
+extern u32 fsnotify_get_cookie(void);
+
+static inline int fsnotify_inode_watches_children(struct inode *inode)
+{
+	/* FS_EVENT_ON_CHILD is set if the inode may care */
+	if (!(inode->i_fsnotify_mask & FS_EVENT_ON_CHILD))
+		return 0;
+	/* this inode might care about child events, does it care about the
+	 * specific set of events that can happen on a child? */
+	return inode->i_fsnotify_mask & FS_EVENTS_POSS_ON_CHILD;
+}
+
+/*
+ * Update the dentry with a flag indicating the interest of its parent to receive
+ * filesystem events when those events happens to this dentry->d_inode.
+ */
+static inline void __fsnotify_update_dcache_flags(struct dentry *dentry)
+{
+	struct dentry *parent;
+
+	assert_spin_locked(&dentry->d_lock);
+
+	/*
+	 * Serialisation of setting PARENT_WATCHED on the dentries is provided
+	 * by d_lock. If inotify_inode_watched changes after we have taken
+	 * d_lock, the following __fsnotify_update_child_dentry_flags call will
+	 * find our entry, so it will spin until we complete here, and update
+	 * us with the new state.
+	 */
+	parent = dentry->d_parent;
+	if (parent->d_inode && fsnotify_inode_watches_children(parent->d_inode))
+		dentry->d_flags |= DCACHE_FSNOTIFY_PARENT_WATCHED;
+	else
+		dentry->d_flags &= ~DCACHE_FSNOTIFY_PARENT_WATCHED;
+}
+
+/*
+ * fsnotify_d_instantiate - instantiate a dentry for inode
+ */
+static inline void __fsnotify_d_instantiate(struct dentry *dentry, struct inode *inode)
+{
+	if (!inode)
+		return;
+
+	spin_lock(&dentry->d_lock);
+	__fsnotify_update_dcache_flags(dentry);
+	spin_unlock(&dentry->d_lock);
+}
+
+/* called from fsnotify listeners, such as fanotify or dnotify */
+
+/* get a reference to an existing or create a new group */
+extern struct fsnotify_group *fsnotify_alloc_group(const struct fsnotify_ops *ops);
+/* drop reference on a group from fsnotify_alloc_group */
+extern void fsnotify_put_group(struct fsnotify_group *group);
+
+/* take a reference to an event */
+extern void fsnotify_get_event(struct fsnotify_event *event);
+extern void fsnotify_put_event(struct fsnotify_event *event);
+/* find private data previously attached to an event and unlink it */
+extern struct fsnotify_event_private_data *fsnotify_remove_priv_from_event(struct fsnotify_group *group,
+									   struct fsnotify_event *event);
+
+/* attach the event to the group notification queue */
+extern struct fsnotify_event *fsnotify_add_notify_event(struct fsnotify_group *group,
+							struct fsnotify_event *event,
+							struct fsnotify_event_private_data *priv,
+							struct fsnotify_event *(*merge)(struct list_head *,
+											struct fsnotify_event *));
+/* true if the group notification queue is empty */
+extern bool fsnotify_notify_queue_is_empty(struct fsnotify_group *group);
+/* return, but do not dequeue the first event on the notification queue */
+extern struct fsnotify_event *fsnotify_peek_notify_event(struct fsnotify_group *group);
+/* return AND dequeue the first event on the notification queue */
+extern struct fsnotify_event *fsnotify_remove_notify_event(struct fsnotify_group *group);
+
+/* functions used to manipulate the marks attached to inodes */
+
+/* run all marks associated with a vfsmount and update mnt->mnt_fsnotify_mask */
+extern void fsnotify_recalc_vfsmount_mask(struct vfsmount *mnt);
+/* run all marks associated with an inode and update inode->i_fsnotify_mask */
+extern void fsnotify_recalc_inode_mask(struct inode *inode);
+extern void fsnotify_init_mark(struct fsnotify_mark *mark, void (*free_mark)(struct fsnotify_mark *mark));
+/* find (and take a reference) to a mark associated with group and inode */
+extern struct fsnotify_mark *fsnotify_find_inode_mark(struct fsnotify_group *group, struct inode *inode);
+/* find (and take a reference) to a mark associated with group and vfsmount */
+extern struct fsnotify_mark *fsnotify_find_vfsmount_mark(struct fsnotify_group *group, struct vfsmount *mnt);
+/* copy the values from old into new */
+extern void fsnotify_duplicate_mark(struct fsnotify_mark *new, struct fsnotify_mark *old);
+/* set the ignored_mask of a mark */
+extern void fsnotify_set_mark_ignored_mask_locked(struct fsnotify_mark *mark, __u32 mask);
+/* set the mask of a mark (might pin the object into memory */
+extern void fsnotify_set_mark_mask_locked(struct fsnotify_mark *mark, __u32 mask);
+/* attach the mark to both the group and the inode */
+extern int fsnotify_add_mark(struct fsnotify_mark *mark, struct fsnotify_group *group,
+			     struct inode *inode, struct vfsmount *mnt, int allow_dups);
+/* given a mark, flag it to be freed when all references are dropped */
+extern void fsnotify_destroy_mark(struct fsnotify_mark *mark);
+/* run all the marks in a group, and clear all of the vfsmount marks */
+extern void fsnotify_clear_vfsmount_marks_by_group(struct fsnotify_group *group);
+/* run all the marks in a group, and clear all of the inode marks */
+extern void fsnotify_clear_inode_marks_by_group(struct fsnotify_group *group);
+/* run all the marks in a group, and clear all of the marks where mark->flags & flags is true*/
+extern void fsnotify_clear_marks_by_group_flags(struct fsnotify_group *group, unsigned int flags);
+/* run all the marks in a group, and flag them to be freed */
+extern void fsnotify_clear_marks_by_group(struct fsnotify_group *group);
+extern void fsnotify_get_mark(struct fsnotify_mark *mark);
+extern void fsnotify_put_mark(struct fsnotify_mark *mark);
+extern void fsnotify_unmount_inodes(struct list_head *list);
+
+/* put here because inotify does some weird stuff when destroying watches */
+extern struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask,
+						    void *data, int data_is,
+						    const unsigned char *name,
+						    u32 cookie, gfp_t gfp);
+
+/* fanotify likes to change events after they are on lists... */
+extern struct fsnotify_event *fsnotify_clone_event(struct fsnotify_event *old_event);
+extern int fsnotify_replace_event(struct fsnotify_event_holder *old_holder,
+				  struct fsnotify_event *new_event);
+
+#else
+
+static inline int fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
+			   const unsigned char *name, u32 cookie)
+{
+	return 0;
+}
+
+static inline int __fsnotify_parent(struct path *path, struct dentry *dentry, __u32 mask)
+{
+	return 0;
+}
+
+static inline void __fsnotify_inode_delete(struct inode *inode)
+{}
+
+static inline void __fsnotify_vfsmount_delete(struct vfsmount *mnt)
+{}
+
+static inline void __fsnotify_update_dcache_flags(struct dentry *dentry)
+{}
+
+static inline void __fsnotify_d_instantiate(struct dentry *dentry, struct inode *inode)
+{}
+
+static inline u32 fsnotify_get_cookie(void)
+{
+	return 0;
+}
+
+static inline void fsnotify_unmount_inodes(struct list_head *list)
+{}
+
+#endif	/* CONFIG_FSNOTIFY */
+
+#endif	/* __KERNEL __ */
+
+#endif	/* __LINUX_FSNOTIFY_BACKEND_H */
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
new file mode 100644
index 00000000..72a6cabb
--- /dev/null
+++ b/include/linux/ftrace.h
@@ -0,0 +1,687 @@
+/*
+ * Ftrace header.  For implementation details beyond the random comments
+ * scattered below, see: Documentation/trace/ftrace-design.txt
+ */
+
+#ifndef _LINUX_FTRACE_H
+#define _LINUX_FTRACE_H
+
+#include <linux/trace_clock.h>
+#include <linux/kallsyms.h>
+#include <linux/linkage.h>
+#include <linux/bitops.h>
+#include <linux/ktime.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+
+#include <asm/ftrace.h>
+
+struct module;
+struct ftrace_hash;
+
+#ifdef CONFIG_FUNCTION_TRACER
+
+extern int ftrace_enabled;
+extern int
+ftrace_enable_sysctl(struct ctl_table *table, int write,
+		     void __user *buffer, size_t *lenp,
+		     loff_t *ppos);
+
+typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip);
+
+/*
+ * FTRACE_OPS_FL_* bits denote the state of ftrace_ops struct and are
+ * set in the flags member.
+ *
+ * ENABLED - set/unset when ftrace_ops is registered/unregistered
+ * GLOBAL  - set manualy by ftrace_ops user to denote the ftrace_ops
+ *           is part of the global tracers sharing the same filter
+ *           via set_ftrace_* debugfs files.
+ * DYNAMIC - set when ftrace_ops is registered to denote dynamically
+ *           allocated ftrace_ops which need special care
+ * CONTROL - set manualy by ftrace_ops user to denote the ftrace_ops
+ *           could be controled by following calls:
+ *             ftrace_function_local_enable
+ *             ftrace_function_local_disable
+ */
+enum {
+	FTRACE_OPS_FL_ENABLED		= 1 << 0,
+	FTRACE_OPS_FL_GLOBAL		= 1 << 1,
+	FTRACE_OPS_FL_DYNAMIC		= 1 << 2,
+	FTRACE_OPS_FL_CONTROL		= 1 << 3,
+};
+
+struct ftrace_ops {
+	ftrace_func_t			func;
+	struct ftrace_ops		*next;
+	unsigned long			flags;
+	int __percpu			*disabled;
+#ifdef CONFIG_DYNAMIC_FTRACE
+	struct ftrace_hash		*notrace_hash;
+	struct ftrace_hash		*filter_hash;
+#endif
+};
+
+extern int function_trace_stop;
+
+/*
+ * Type of the current tracing.
+ */
+enum ftrace_tracing_type_t {
+	FTRACE_TYPE_ENTER = 0, /* Hook the call of the function */
+	FTRACE_TYPE_RETURN,	/* Hook the return of the function */
+};
+
+/* Current tracing type, default is FTRACE_TYPE_ENTER */
+extern enum ftrace_tracing_type_t ftrace_tracing_type;
+
+/**
+ * ftrace_stop - stop function tracer.
+ *
+ * A quick way to stop the function tracer. Note this an on off switch,
+ * it is not something that is recursive like preempt_disable.
+ * This does not disable the calling of mcount, it only stops the
+ * calling of functions from mcount.
+ */
+static inline void ftrace_stop(void)
+{
+	function_trace_stop = 1;
+}
+
+/**
+ * ftrace_start - start the function tracer.
+ *
+ * This function is the inverse of ftrace_stop. This does not enable
+ * the function tracing if the function tracer is disabled. This only
+ * sets the function tracer flag to continue calling the functions
+ * from mcount.
+ */
+static inline void ftrace_start(void)
+{
+	function_trace_stop = 0;
+}
+
+/*
+ * The ftrace_ops must be a static and should also
+ * be read_mostly.  These functions do modify read_mostly variables
+ * so use them sparely. Never free an ftrace_op or modify the
+ * next pointer after it has been registered. Even after unregistering
+ * it, the next pointer may still be used internally.
+ */
+int register_ftrace_function(struct ftrace_ops *ops);
+int unregister_ftrace_function(struct ftrace_ops *ops);
+void clear_ftrace_function(void);
+
+/**
+ * ftrace_function_local_enable - enable controlled ftrace_ops on current cpu
+ *
+ * This function enables tracing on current cpu by decreasing
+ * the per cpu control variable.
+ * It must be called with preemption disabled and only on ftrace_ops
+ * registered with FTRACE_OPS_FL_CONTROL. If called without preemption
+ * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled.
+ */
+static inline void ftrace_function_local_enable(struct ftrace_ops *ops)
+{
+	if (WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL)))
+		return;
+
+	(*this_cpu_ptr(ops->disabled))--;
+}
+
+/**
+ * ftrace_function_local_disable - enable controlled ftrace_ops on current cpu
+ *
+ * This function enables tracing on current cpu by decreasing
+ * the per cpu control variable.
+ * It must be called with preemption disabled and only on ftrace_ops
+ * registered with FTRACE_OPS_FL_CONTROL. If called without preemption
+ * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled.
+ */
+static inline void ftrace_function_local_disable(struct ftrace_ops *ops)
+{
+	if (WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL)))
+		return;
+
+	(*this_cpu_ptr(ops->disabled))++;
+}
+
+/**
+ * ftrace_function_local_disabled - returns ftrace_ops disabled value
+ *                                  on current cpu
+ *
+ * This function returns value of ftrace_ops::disabled on current cpu.
+ * It must be called with preemption disabled and only on ftrace_ops
+ * registered with FTRACE_OPS_FL_CONTROL. If called without preemption
+ * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled.
+ */
+static inline int ftrace_function_local_disabled(struct ftrace_ops *ops)
+{
+	WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL));
+	return *this_cpu_ptr(ops->disabled);
+}
+
+extern void ftrace_stub(unsigned long a0, unsigned long a1);
+
+#else /* !CONFIG_FUNCTION_TRACER */
+/*
+ * (un)register_ftrace_function must be a macro since the ops parameter
+ * must not be evaluated.
+ */
+#define register_ftrace_function(ops) ({ 0; })
+#define unregister_ftrace_function(ops) ({ 0; })
+static inline void clear_ftrace_function(void) { }
+static inline void ftrace_kill(void) { }
+static inline void ftrace_stop(void) { }
+static inline void ftrace_start(void) { }
+#endif /* CONFIG_FUNCTION_TRACER */
+
+#ifdef CONFIG_STACK_TRACER
+extern int stack_tracer_enabled;
+int
+stack_trace_sysctl(struct ctl_table *table, int write,
+		   void __user *buffer, size_t *lenp,
+		   loff_t *ppos);
+#endif
+
+struct ftrace_func_command {
+	struct list_head	list;
+	char			*name;
+	int			(*func)(struct ftrace_hash *hash,
+					char *func, char *cmd,
+					char *params, int enable);
+};
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+int ftrace_arch_code_modify_prepare(void);
+int ftrace_arch_code_modify_post_process(void);
+
+void ftrace_bug(int err, unsigned long ip);
+
+struct seq_file;
+
+struct ftrace_probe_ops {
+	void			(*func)(unsigned long ip,
+					unsigned long parent_ip,
+					void **data);
+	int			(*callback)(unsigned long ip, void **data);
+	void			(*free)(void **data);
+	int			(*print)(struct seq_file *m,
+					 unsigned long ip,
+					 struct ftrace_probe_ops *ops,
+					 void *data);
+};
+
+extern int
+register_ftrace_function_probe(char *glob, struct ftrace_probe_ops *ops,
+			      void *data);
+extern void
+unregister_ftrace_function_probe(char *glob, struct ftrace_probe_ops *ops,
+				void *data);
+extern void
+unregister_ftrace_function_probe_func(char *glob, struct ftrace_probe_ops *ops);
+extern void unregister_ftrace_function_probe_all(char *glob);
+
+extern int ftrace_text_reserved(void *start, void *end);
+
+enum {
+	FTRACE_FL_ENABLED	= (1 << 30),
+};
+
+#define FTRACE_FL_MASK		(0x3UL << 30)
+#define FTRACE_REF_MAX		((1 << 30) - 1)
+
+struct dyn_ftrace {
+	union {
+		unsigned long		ip; /* address of mcount call-site */
+		struct dyn_ftrace	*freelist;
+	};
+	unsigned long		flags;
+	struct dyn_arch_ftrace		arch;
+};
+
+int ftrace_force_update(void);
+int ftrace_set_filter(struct ftrace_ops *ops, unsigned char *buf,
+		       int len, int reset);
+int ftrace_set_notrace(struct ftrace_ops *ops, unsigned char *buf,
+			int len, int reset);
+void ftrace_set_global_filter(unsigned char *buf, int len, int reset);
+void ftrace_set_global_notrace(unsigned char *buf, int len, int reset);
+void ftrace_free_filter(struct ftrace_ops *ops);
+
+int register_ftrace_command(struct ftrace_func_command *cmd);
+int unregister_ftrace_command(struct ftrace_func_command *cmd);
+
+enum {
+	FTRACE_UPDATE_CALLS		= (1 << 0),
+	FTRACE_DISABLE_CALLS		= (1 << 1),
+	FTRACE_UPDATE_TRACE_FUNC	= (1 << 2),
+	FTRACE_START_FUNC_RET		= (1 << 3),
+	FTRACE_STOP_FUNC_RET		= (1 << 4),
+};
+
+enum {
+	FTRACE_UPDATE_IGNORE,
+	FTRACE_UPDATE_MAKE_CALL,
+	FTRACE_UPDATE_MAKE_NOP,
+};
+
+enum {
+	FTRACE_ITER_FILTER	= (1 << 0),
+	FTRACE_ITER_NOTRACE	= (1 << 1),
+	FTRACE_ITER_PRINTALL	= (1 << 2),
+	FTRACE_ITER_DO_HASH	= (1 << 3),
+	FTRACE_ITER_HASH	= (1 << 4),
+	FTRACE_ITER_ENABLED	= (1 << 5),
+};
+
+void arch_ftrace_update_code(int command);
+
+struct ftrace_rec_iter;
+
+struct ftrace_rec_iter *ftrace_rec_iter_start(void);
+struct ftrace_rec_iter *ftrace_rec_iter_next(struct ftrace_rec_iter *iter);
+struct dyn_ftrace *ftrace_rec_iter_record(struct ftrace_rec_iter *iter);
+
+int ftrace_update_record(struct dyn_ftrace *rec, int enable);
+int ftrace_test_record(struct dyn_ftrace *rec, int enable);
+void ftrace_run_stop_machine(int command);
+int ftrace_location(unsigned long ip);
+
+extern ftrace_func_t ftrace_trace_function;
+
+int ftrace_regex_open(struct ftrace_ops *ops, int flag,
+		  struct inode *inode, struct file *file);
+ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf,
+			    size_t cnt, loff_t *ppos);
+ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf,
+			     size_t cnt, loff_t *ppos);
+loff_t ftrace_regex_lseek(struct file *file, loff_t offset, int origin);
+int ftrace_regex_release(struct inode *inode, struct file *file);
+
+void __init
+ftrace_set_early_filter(struct ftrace_ops *ops, char *buf, int enable);
+
+/* defined in arch */
+extern int ftrace_ip_converted(unsigned long ip);
+extern int ftrace_dyn_arch_init(void *data);
+extern int ftrace_update_ftrace_func(ftrace_func_t func);
+extern void ftrace_caller(void);
+extern void ftrace_call(void);
+extern void mcount_call(void);
+
+#ifndef FTRACE_ADDR
+#define FTRACE_ADDR ((unsigned long)ftrace_caller)
+#endif
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+extern void ftrace_graph_caller(void);
+extern int ftrace_enable_ftrace_graph_caller(void);
+extern int ftrace_disable_ftrace_graph_caller(void);
+#else
+static inline int ftrace_enable_ftrace_graph_caller(void) { return 0; }
+static inline int ftrace_disable_ftrace_graph_caller(void) { return 0; }
+#endif
+
+/**
+ * ftrace_make_nop - convert code into nop
+ * @mod: module structure if called by module load initialization
+ * @rec: the mcount call site record
+ * @addr: the address that the call site should be calling
+ *
+ * This is a very sensitive operation and great care needs
+ * to be taken by the arch.  The operation should carefully
+ * read the location, check to see if what is read is indeed
+ * what we expect it to be, and then on success of the compare,
+ * it should write to the location.
+ *
+ * The code segment at @rec->ip should be a caller to @addr
+ *
+ * Return must be:
+ *  0 on success
+ *  -EFAULT on error reading the location
+ *  -EINVAL on a failed compare of the contents
+ *  -EPERM  on error writing to the location
+ * Any other value will be considered a failure.
+ */
+extern int ftrace_make_nop(struct module *mod,
+			   struct dyn_ftrace *rec, unsigned long addr);
+
+/**
+ * ftrace_make_call - convert a nop call site into a call to addr
+ * @rec: the mcount call site record
+ * @addr: the address that the call site should call
+ *
+ * This is a very sensitive operation and great care needs
+ * to be taken by the arch.  The operation should carefully
+ * read the location, check to see if what is read is indeed
+ * what we expect it to be, and then on success of the compare,
+ * it should write to the location.
+ *
+ * The code segment at @rec->ip should be a nop
+ *
+ * Return must be:
+ *  0 on success
+ *  -EFAULT on error reading the location
+ *  -EINVAL on a failed compare of the contents
+ *  -EPERM  on error writing to the location
+ * Any other value will be considered a failure.
+ */
+extern int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr);
+
+/* May be defined in arch */
+extern int ftrace_arch_read_dyn_info(char *buf, int size);
+
+extern int skip_trace(unsigned long ip);
+
+extern void ftrace_disable_daemon(void);
+extern void ftrace_enable_daemon(void);
+#else
+static inline int skip_trace(unsigned long ip) { return 0; }
+static inline int ftrace_force_update(void) { return 0; }
+static inline void ftrace_disable_daemon(void) { }
+static inline void ftrace_enable_daemon(void) { }
+static inline void ftrace_release_mod(struct module *mod) {}
+static inline int register_ftrace_command(struct ftrace_func_command *cmd)
+{
+	return -EINVAL;
+}
+static inline int unregister_ftrace_command(char *cmd_name)
+{
+	return -EINVAL;
+}
+static inline int ftrace_text_reserved(void *start, void *end)
+{
+	return 0;
+}
+
+/*
+ * Again users of functions that have ftrace_ops may not
+ * have them defined when ftrace is not enabled, but these
+ * functions may still be called. Use a macro instead of inline.
+ */
+#define ftrace_regex_open(ops, flag, inod, file) ({ -ENODEV; })
+#define ftrace_set_early_filter(ops, buf, enable) do { } while (0)
+#define ftrace_set_filter(ops, buf, len, reset) ({ -ENODEV; })
+#define ftrace_set_notrace(ops, buf, len, reset) ({ -ENODEV; })
+#define ftrace_free_filter(ops) do { } while (0)
+
+static inline ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf,
+			    size_t cnt, loff_t *ppos) { return -ENODEV; }
+static inline ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf,
+			     size_t cnt, loff_t *ppos) { return -ENODEV; }
+static inline loff_t ftrace_regex_lseek(struct file *file, loff_t offset, int origin)
+{
+	return -ENODEV;
+}
+static inline int
+ftrace_regex_release(struct inode *inode, struct file *file) { return -ENODEV; }
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+/* totally disable ftrace - can not re-enable after this */
+void ftrace_kill(void);
+
+static inline void tracer_disable(void)
+{
+#ifdef CONFIG_FUNCTION_TRACER
+	ftrace_enabled = 0;
+#endif
+}
+
+/*
+ * Ftrace disable/restore without lock. Some synchronization mechanism
+ * must be used to prevent ftrace_enabled to be changed between
+ * disable/restore.
+ */
+static inline int __ftrace_enabled_save(void)
+{
+#ifdef CONFIG_FUNCTION_TRACER
+	int saved_ftrace_enabled = ftrace_enabled;
+	ftrace_enabled = 0;
+	return saved_ftrace_enabled;
+#else
+	return 0;
+#endif
+}
+
+static inline void __ftrace_enabled_restore(int enabled)
+{
+#ifdef CONFIG_FUNCTION_TRACER
+	ftrace_enabled = enabled;
+#endif
+}
+
+#ifndef HAVE_ARCH_CALLER_ADDR
+# ifdef CONFIG_FRAME_POINTER
+#  define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
+#  define CALLER_ADDR1 ((unsigned long)__builtin_return_address(1))
+#  define CALLER_ADDR2 ((unsigned long)__builtin_return_address(2))
+#  define CALLER_ADDR3 ((unsigned long)__builtin_return_address(3))
+#  define CALLER_ADDR4 ((unsigned long)__builtin_return_address(4))
+#  define CALLER_ADDR5 ((unsigned long)__builtin_return_address(5))
+#  define CALLER_ADDR6 ((unsigned long)__builtin_return_address(6))
+# else
+#  define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
+#  define CALLER_ADDR1 0UL
+#  define CALLER_ADDR2 0UL
+#  define CALLER_ADDR3 0UL
+#  define CALLER_ADDR4 0UL
+#  define CALLER_ADDR5 0UL
+#  define CALLER_ADDR6 0UL
+# endif
+#endif /* ifndef HAVE_ARCH_CALLER_ADDR */
+
+#ifdef CONFIG_IRQSOFF_TRACER
+  extern void time_hardirqs_on(unsigned long a0, unsigned long a1);
+  extern void time_hardirqs_off(unsigned long a0, unsigned long a1);
+#else
+  static inline void time_hardirqs_on(unsigned long a0, unsigned long a1) { }
+  static inline void time_hardirqs_off(unsigned long a0, unsigned long a1) { }
+#endif
+
+#ifdef CONFIG_PREEMPT_TRACER
+  extern void trace_preempt_on(unsigned long a0, unsigned long a1);
+  extern void trace_preempt_off(unsigned long a0, unsigned long a1);
+#else
+  static inline void trace_preempt_on(unsigned long a0, unsigned long a1) { }
+  static inline void trace_preempt_off(unsigned long a0, unsigned long a1) { }
+#endif
+
+#ifdef CONFIG_FTRACE_MCOUNT_RECORD
+extern void ftrace_init(void);
+#else
+static inline void ftrace_init(void) { }
+#endif
+
+/*
+ * Structure that defines an entry function trace.
+ */
+struct ftrace_graph_ent {
+	unsigned long func; /* Current function */
+	int depth;
+};
+
+/*
+ * Structure that defines a return function trace.
+ */
+struct ftrace_graph_ret {
+	unsigned long func; /* Current function */
+	unsigned long long calltime;
+	unsigned long long rettime;
+	/* Number of functions that overran the depth limit for current task */
+	unsigned long overrun;
+	int depth;
+};
+
+/* Type of the callback handlers for tracing function graph*/
+typedef void (*trace_func_graph_ret_t)(struct ftrace_graph_ret *); /* return */
+typedef int (*trace_func_graph_ent_t)(struct ftrace_graph_ent *); /* entry */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+
+/* for init task */
+#define INIT_FTRACE_GRAPH		.ret_stack = NULL,
+
+/*
+ * Stack of return addresses for functions
+ * of a thread.
+ * Used in struct thread_info
+ */
+struct ftrace_ret_stack {
+	unsigned long ret;
+	unsigned long func;
+	unsigned long long calltime;
+	unsigned long long subtime;
+	unsigned long fp;
+};
+
+/*
+ * Primary handler of a function return.
+ * It relays on ftrace_return_to_handler.
+ * Defined in entry_32/64.S
+ */
+extern void return_to_handler(void);
+
+extern int
+ftrace_push_return_trace(unsigned long ret, unsigned long func, int *depth,
+			 unsigned long frame_pointer);
+
+/*
+ * Sometimes we don't want to trace a function with the function
+ * graph tracer but we want them to keep traced by the usual function
+ * tracer if the function graph tracer is not configured.
+ */
+#define __notrace_funcgraph		notrace
+
+/*
+ * We want to which function is an entrypoint of a hardirq.
+ * That will help us to put a signal on output.
+ */
+#define __irq_entry		 __attribute__((__section__(".irqentry.text")))
+
+/* Limits of hardirq entrypoints */
+extern char __irqentry_text_start[];
+extern char __irqentry_text_end[];
+
+#define FTRACE_RETFUNC_DEPTH 50
+#define FTRACE_RETSTACK_ALLOC_SIZE 32
+extern int register_ftrace_graph(trace_func_graph_ret_t retfunc,
+				trace_func_graph_ent_t entryfunc);
+
+extern void ftrace_graph_stop(void);
+
+/* The current handlers in use */
+extern trace_func_graph_ret_t ftrace_graph_return;
+extern trace_func_graph_ent_t ftrace_graph_entry;
+
+extern void unregister_ftrace_graph(void);
+
+extern void ftrace_graph_init_task(struct task_struct *t);
+extern void ftrace_graph_exit_task(struct task_struct *t);
+extern void ftrace_graph_init_idle_task(struct task_struct *t, int cpu);
+
+static inline int task_curr_ret_stack(struct task_struct *t)
+{
+	return t->curr_ret_stack;
+}
+
+static inline void pause_graph_tracing(void)
+{
+	atomic_inc(&current->tracing_graph_pause);
+}
+
+static inline void unpause_graph_tracing(void)
+{
+	atomic_dec(&current->tracing_graph_pause);
+}
+#else /* !CONFIG_FUNCTION_GRAPH_TRACER */
+
+#define __notrace_funcgraph
+#define __irq_entry
+#define INIT_FTRACE_GRAPH
+
+static inline void ftrace_graph_init_task(struct task_struct *t) { }
+static inline void ftrace_graph_exit_task(struct task_struct *t) { }
+static inline void ftrace_graph_init_idle_task(struct task_struct *t, int cpu) { }
+
+static inline int register_ftrace_graph(trace_func_graph_ret_t retfunc,
+			  trace_func_graph_ent_t entryfunc)
+{
+	return -1;
+}
+static inline void unregister_ftrace_graph(void) { }
+
+static inline int task_curr_ret_stack(struct task_struct *tsk)
+{
+	return -1;
+}
+
+static inline void pause_graph_tracing(void) { }
+static inline void unpause_graph_tracing(void) { }
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
+#ifdef CONFIG_TRACING
+
+/* flags for current->trace */
+enum {
+	TSK_TRACE_FL_TRACE_BIT	= 0,
+	TSK_TRACE_FL_GRAPH_BIT	= 1,
+};
+enum {
+	TSK_TRACE_FL_TRACE	= 1 << TSK_TRACE_FL_TRACE_BIT,
+	TSK_TRACE_FL_GRAPH	= 1 << TSK_TRACE_FL_GRAPH_BIT,
+};
+
+static inline void set_tsk_trace_trace(struct task_struct *tsk)
+{
+	set_bit(TSK_TRACE_FL_TRACE_BIT, &tsk->trace);
+}
+
+static inline void clear_tsk_trace_trace(struct task_struct *tsk)
+{
+	clear_bit(TSK_TRACE_FL_TRACE_BIT, &tsk->trace);
+}
+
+static inline int test_tsk_trace_trace(struct task_struct *tsk)
+{
+	return tsk->trace & TSK_TRACE_FL_TRACE;
+}
+
+static inline void set_tsk_trace_graph(struct task_struct *tsk)
+{
+	set_bit(TSK_TRACE_FL_GRAPH_BIT, &tsk->trace);
+}
+
+static inline void clear_tsk_trace_graph(struct task_struct *tsk)
+{
+	clear_bit(TSK_TRACE_FL_GRAPH_BIT, &tsk->trace);
+}
+
+static inline int test_tsk_trace_graph(struct task_struct *tsk)
+{
+	return tsk->trace & TSK_TRACE_FL_GRAPH;
+}
+
+enum ftrace_dump_mode;
+
+extern enum ftrace_dump_mode ftrace_dump_on_oops;
+
+#ifdef CONFIG_PREEMPT
+#define INIT_TRACE_RECURSION		.trace_recursion = 0,
+#endif
+
+#endif /* CONFIG_TRACING */
+
+#ifndef INIT_TRACE_RECURSION
+#define INIT_TRACE_RECURSION
+#endif
+
+#ifdef CONFIG_FTRACE_SYSCALLS
+
+unsigned long arch_syscall_addr(int nr);
+
+#endif /* CONFIG_FTRACE_SYSCALLS */
+
+#endif /* _LINUX_FTRACE_H */
diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h
new file mode 100644
index 00000000..176a939d
--- /dev/null
+++ b/include/linux/ftrace_event.h
@@ -0,0 +1,312 @@
+#ifndef _LINUX_FTRACE_EVENT_H
+#define _LINUX_FTRACE_EVENT_H
+
+#include <linux/ring_buffer.h>
+#include <linux/trace_seq.h>
+#include <linux/percpu.h>
+#include <linux/hardirq.h>
+#include <linux/perf_event.h>
+
+struct trace_array;
+struct tracer;
+struct dentry;
+
+struct trace_print_flags {
+	unsigned long		mask;
+	const char		*name;
+};
+
+struct trace_print_flags_u64 {
+	unsigned long long	mask;
+	const char		*name;
+};
+
+const char *ftrace_print_flags_seq(struct trace_seq *p, const char *delim,
+				   unsigned long flags,
+				   const struct trace_print_flags *flag_array);
+
+const char *ftrace_print_symbols_seq(struct trace_seq *p, unsigned long val,
+				     const struct trace_print_flags *symbol_array);
+
+#if BITS_PER_LONG == 32
+const char *ftrace_print_symbols_seq_u64(struct trace_seq *p,
+					 unsigned long long val,
+					 const struct trace_print_flags_u64
+								 *symbol_array);
+#endif
+
+const char *ftrace_print_hex_seq(struct trace_seq *p,
+				 const unsigned char *buf, int len);
+
+/*
+ * The trace entry - the most basic unit of tracing. This is what
+ * is printed in the end as a single line in the trace output, such as:
+ *
+ *     bash-15816 [01]   235.197585: idle_cpu <- irq_enter
+ */
+struct trace_entry {
+	unsigned short		type;
+	unsigned char		flags;
+	unsigned char		preempt_count;
+	int			pid;
+	int			padding;
+};
+
+#define FTRACE_MAX_EVENT						\
+	((1 << (sizeof(((struct trace_entry *)0)->type) * 8)) - 1)
+
+/*
+ * Trace iterator - used by printout routines who present trace
+ * results to users and which routines might sleep, etc:
+ */
+struct trace_iterator {
+	struct trace_array	*tr;
+	struct tracer		*trace;
+	void			*private;
+	int			cpu_file;
+	struct mutex		mutex;
+	struct ring_buffer_iter	*buffer_iter[NR_CPUS];
+	unsigned long		iter_flags;
+
+	/* trace_seq for __print_flags() and __print_symbolic() etc. */
+	struct trace_seq	tmp_seq;
+
+	/* The below is zeroed out in pipe_read */
+	struct trace_seq	seq;
+	struct trace_entry	*ent;
+	unsigned long		lost_events;
+	int			leftover;
+	int			ent_size;
+	int			cpu;
+	u64			ts;
+
+	loff_t			pos;
+	long			idx;
+
+	cpumask_var_t		started;
+};
+
+
+struct trace_event;
+
+typedef enum print_line_t (*trace_print_func)(struct trace_iterator *iter,
+				      int flags, struct trace_event *event);
+
+struct trace_event_functions {
+	trace_print_func	trace;
+	trace_print_func	raw;
+	trace_print_func	hex;
+	trace_print_func	binary;
+};
+
+struct trace_event {
+	struct hlist_node		node;
+	struct list_head		list;
+	int				type;
+	struct trace_event_functions	*funcs;
+};
+
+extern int register_ftrace_event(struct trace_event *event);
+extern int unregister_ftrace_event(struct trace_event *event);
+
+/* Return values for print_line callback */
+enum print_line_t {
+	TRACE_TYPE_PARTIAL_LINE	= 0,	/* Retry after flushing the seq */
+	TRACE_TYPE_HANDLED	= 1,
+	TRACE_TYPE_UNHANDLED	= 2,	/* Relay to other output functions */
+	TRACE_TYPE_NO_CONSUME	= 3	/* Handled but ask to not consume */
+};
+
+void tracing_generic_entry_update(struct trace_entry *entry,
+				  unsigned long flags,
+				  int pc);
+struct ring_buffer_event *
+trace_current_buffer_lock_reserve(struct ring_buffer **current_buffer,
+				  int type, unsigned long len,
+				  unsigned long flags, int pc);
+void trace_current_buffer_unlock_commit(struct ring_buffer *buffer,
+					struct ring_buffer_event *event,
+					unsigned long flags, int pc);
+void trace_nowake_buffer_unlock_commit(struct ring_buffer *buffer,
+				       struct ring_buffer_event *event,
+					unsigned long flags, int pc);
+void trace_nowake_buffer_unlock_commit_regs(struct ring_buffer *buffer,
+					    struct ring_buffer_event *event,
+					    unsigned long flags, int pc,
+					    struct pt_regs *regs);
+void trace_current_buffer_discard_commit(struct ring_buffer *buffer,
+					 struct ring_buffer_event *event);
+
+void tracing_record_cmdline(struct task_struct *tsk);
+
+struct event_filter;
+
+enum trace_reg {
+	TRACE_REG_REGISTER,
+	TRACE_REG_UNREGISTER,
+#ifdef CONFIG_PERF_EVENTS
+	TRACE_REG_PERF_REGISTER,
+	TRACE_REG_PERF_UNREGISTER,
+	TRACE_REG_PERF_OPEN,
+	TRACE_REG_PERF_CLOSE,
+	TRACE_REG_PERF_ADD,
+	TRACE_REG_PERF_DEL,
+#endif
+};
+
+struct ftrace_event_call;
+
+struct ftrace_event_class {
+	char			*system;
+	void			*probe;
+#ifdef CONFIG_PERF_EVENTS
+	void			*perf_probe;
+#endif
+	int			(*reg)(struct ftrace_event_call *event,
+				       enum trace_reg type, void *data);
+	int			(*define_fields)(struct ftrace_event_call *);
+	struct list_head	*(*get_fields)(struct ftrace_event_call *);
+	struct list_head	fields;
+	int			(*raw_init)(struct ftrace_event_call *);
+};
+
+extern int ftrace_event_reg(struct ftrace_event_call *event,
+			    enum trace_reg type, void *data);
+
+enum {
+	TRACE_EVENT_FL_ENABLED_BIT,
+	TRACE_EVENT_FL_FILTERED_BIT,
+	TRACE_EVENT_FL_RECORDED_CMD_BIT,
+	TRACE_EVENT_FL_CAP_ANY_BIT,
+	TRACE_EVENT_FL_NO_SET_FILTER_BIT,
+	TRACE_EVENT_FL_IGNORE_ENABLE_BIT,
+};
+
+enum {
+	TRACE_EVENT_FL_ENABLED		= (1 << TRACE_EVENT_FL_ENABLED_BIT),
+	TRACE_EVENT_FL_FILTERED		= (1 << TRACE_EVENT_FL_FILTERED_BIT),
+	TRACE_EVENT_FL_RECORDED_CMD	= (1 << TRACE_EVENT_FL_RECORDED_CMD_BIT),
+	TRACE_EVENT_FL_CAP_ANY		= (1 << TRACE_EVENT_FL_CAP_ANY_BIT),
+	TRACE_EVENT_FL_NO_SET_FILTER	= (1 << TRACE_EVENT_FL_NO_SET_FILTER_BIT),
+	TRACE_EVENT_FL_IGNORE_ENABLE	= (1 << TRACE_EVENT_FL_IGNORE_ENABLE_BIT),
+};
+
+struct ftrace_event_call {
+	struct list_head	list;
+	struct ftrace_event_class *class;
+	char			*name;
+	struct dentry		*dir;
+	struct trace_event	event;
+	const char		*print_fmt;
+	struct event_filter	*filter;
+	void			*mod;
+	void			*data;
+
+	/*
+	 * 32 bit flags:
+	 *   bit 1:		enabled
+	 *   bit 2:		filter_active
+	 *   bit 3:		enabled cmd record
+	 *
+	 * Changes to flags must hold the event_mutex.
+	 *
+	 * Note: Reads of flags do not hold the event_mutex since
+	 * they occur in critical sections. But the way flags
+	 * is currently used, these changes do no affect the code
+	 * except that when a change is made, it may have a slight
+	 * delay in propagating the changes to other CPUs due to
+	 * caching and such.
+	 */
+	unsigned int		flags;
+
+#ifdef CONFIG_PERF_EVENTS
+	int				perf_refcount;
+	struct hlist_head __percpu	*perf_events;
+#endif
+};
+
+#define __TRACE_EVENT_FLAGS(name, value)				\
+	static int __init trace_init_flags_##name(void)			\
+	{								\
+		event_##name.flags = value;				\
+		return 0;						\
+	}								\
+	early_initcall(trace_init_flags_##name);
+
+#define PERF_MAX_TRACE_SIZE	2048
+
+#define MAX_FILTER_STR_VAL	256	/* Should handle KSYM_SYMBOL_LEN */
+
+extern void destroy_preds(struct ftrace_event_call *call);
+extern int filter_match_preds(struct event_filter *filter, void *rec);
+extern int filter_current_check_discard(struct ring_buffer *buffer,
+					struct ftrace_event_call *call,
+					void *rec,
+					struct ring_buffer_event *event);
+
+enum {
+	FILTER_OTHER = 0,
+	FILTER_STATIC_STRING,
+	FILTER_DYN_STRING,
+	FILTER_PTR_STRING,
+	FILTER_TRACE_FN,
+};
+
+#define EVENT_STORAGE_SIZE 128
+extern struct mutex event_storage_mutex;
+extern char event_storage[EVENT_STORAGE_SIZE];
+
+extern int trace_event_raw_init(struct ftrace_event_call *call);
+extern int trace_define_field(struct ftrace_event_call *call, const char *type,
+			      const char *name, int offset, int size,
+			      int is_signed, int filter_type);
+extern int trace_add_event_call(struct ftrace_event_call *call);
+extern void trace_remove_event_call(struct ftrace_event_call *call);
+
+#define is_signed_type(type)	(((type)(-1)) < 0)
+
+int trace_set_clr_event(const char *system, const char *event, int set);
+
+/*
+ * The double __builtin_constant_p is because gcc will give us an error
+ * if we try to allocate the static variable to fmt if it is not a
+ * constant. Even with the outer if statement optimizing out.
+ */
+#define event_trace_printk(ip, fmt, args...)				\
+do {									\
+	__trace_printk_check_format(fmt, ##args);			\
+	tracing_record_cmdline(current);				\
+	if (__builtin_constant_p(fmt)) {				\
+		static const char *trace_printk_fmt			\
+		  __attribute__((section("__trace_printk_fmt"))) =	\
+			__builtin_constant_p(fmt) ? fmt : NULL;		\
+									\
+		__trace_bprintk(ip, trace_printk_fmt, ##args);		\
+	} else								\
+		__trace_printk(ip, fmt, ##args);			\
+} while (0)
+
+#ifdef CONFIG_PERF_EVENTS
+struct perf_event;
+
+DECLARE_PER_CPU(struct pt_regs, perf_trace_regs);
+
+extern int  perf_trace_init(struct perf_event *event);
+extern void perf_trace_destroy(struct perf_event *event);
+extern int  perf_trace_add(struct perf_event *event, int flags);
+extern void perf_trace_del(struct perf_event *event, int flags);
+extern int  ftrace_profile_set_filter(struct perf_event *event, int event_id,
+				     char *filter_str);
+extern void ftrace_profile_free_filter(struct perf_event *event);
+extern void *perf_trace_buf_prepare(int size, unsigned short type,
+				    struct pt_regs *regs, int *rctxp);
+
+static inline void
+perf_trace_buf_submit(void *raw_data, int size, int rctx, u64 addr,
+		       u64 count, struct pt_regs *regs, void *head)
+{
+	perf_tp_event(addr, count, raw_data, size, regs, head, rctx);
+}
+#endif
+
+#endif /* _LINUX_FTRACE_EVENT_H */
diff --git a/include/linux/ftrace_irq.h b/include/linux/ftrace_irq.h
new file mode 100644
index 00000000..dca7bf8c
--- /dev/null
+++ b/include/linux/ftrace_irq.h
@@ -0,0 +1,13 @@
+#ifndef _LINUX_FTRACE_IRQ_H
+#define _LINUX_FTRACE_IRQ_H
+
+
+#ifdef CONFIG_FTRACE_NMI_ENTER
+extern void ftrace_nmi_enter(void);
+extern void ftrace_nmi_exit(void);
+#else
+static inline void ftrace_nmi_enter(void) { }
+static inline void ftrace_nmi_exit(void) { }
+#endif
+
+#endif /* _LINUX_FTRACE_IRQ_H */
diff --git a/include/linux/fuse.h b/include/linux/fuse.h
new file mode 100644
index 00000000..8f2ab8fe
--- /dev/null
+++ b/include/linux/fuse.h
@@ -0,0 +1,648 @@
+/*
+    FUSE: Filesystem in Userspace
+    Copyright (C) 2001-2008  Miklos Szeredi <miklos@szeredi.hu>
+
+    This program can be distributed under the terms of the GNU GPL.
+    See the file COPYING.
+*/
+
+/*
+ * This file defines the kernel interface of FUSE
+ *
+ * Protocol changelog:
+ *
+ * 7.9:
+ *  - new fuse_getattr_in input argument of GETATTR
+ *  - add lk_flags in fuse_lk_in
+ *  - add lock_owner field to fuse_setattr_in, fuse_read_in and fuse_write_in
+ *  - add blksize field to fuse_attr
+ *  - add file flags field to fuse_read_in and fuse_write_in
+ *
+ * 7.10
+ *  - add nonseekable open flag
+ *
+ * 7.11
+ *  - add IOCTL message
+ *  - add unsolicited notification support
+ *  - add POLL message and NOTIFY_POLL notification
+ *
+ * 7.12
+ *  - add umask flag to input argument of open, mknod and mkdir
+ *  - add notification messages for invalidation of inodes and
+ *    directory entries
+ *
+ * 7.13
+ *  - make max number of background requests and congestion threshold
+ *    tunables
+ *
+ * 7.14
+ *  - add splice support to fuse device
+ *
+ * 7.15
+ *  - add store notify
+ *  - add retrieve notify
+ *
+ * 7.16
+ *  - add BATCH_FORGET request
+ *  - FUSE_IOCTL_UNRESTRICTED shall now return with array of 'struct
+ *    fuse_ioctl_iovec' instead of ambiguous 'struct iovec'
+ *  - add FUSE_IOCTL_32BIT flag
+ *
+ * 7.17
+ *  - add FUSE_FLOCK_LOCKS and FUSE_RELEASE_FLOCK_UNLOCK
+ *
+ * 7.18
+ *  - add FUSE_IOCTL_DIR flag
+ *  - add FUSE_NOTIFY_DELETE
+ */
+
+#ifndef _LINUX_FUSE_H
+#define _LINUX_FUSE_H
+
+#include <linux/types.h>
+
+/*
+ * Version negotiation:
+ *
+ * Both the kernel and userspace send the version they support in the
+ * INIT request and reply respectively.
+ *
+ * If the major versions match then both shall use the smallest
+ * of the two minor versions for communication.
+ *
+ * If the kernel supports a larger major version, then userspace shall
+ * reply with the major version it supports, ignore the rest of the
+ * INIT message and expect a new INIT message from the kernel with a
+ * matching major version.
+ *
+ * If the library supports a larger major version, then it shall fall
+ * back to the major protocol version sent by the kernel for
+ * communication and reply with that major version (and an arbitrary
+ * supported minor version).
+ */
+
+/** Version number of this interface */
+#define FUSE_KERNEL_VERSION 7
+
+/** Minor version number of this interface */
+#define FUSE_KERNEL_MINOR_VERSION 18
+
+/** The node ID of the root inode */
+#define FUSE_ROOT_ID 1
+
+/* Make sure all structures are padded to 64bit boundary, so 32bit
+   userspace works under 64bit kernels */
+
+struct fuse_attr {
+	__u64	ino;
+	__u64	size;
+	__u64	blocks;
+	__u64	atime;
+	__u64	mtime;
+	__u64	ctime;
+	__u32	atimensec;
+	__u32	mtimensec;
+	__u32	ctimensec;
+	__u32	mode;
+	__u32	nlink;
+	__u32	uid;
+	__u32	gid;
+	__u32	rdev;
+	__u32	blksize;
+	__u32	padding;
+};
+
+struct fuse_kstatfs {
+	__u64	blocks;
+	__u64	bfree;
+	__u64	bavail;
+	__u64	files;
+	__u64	ffree;
+	__u32	bsize;
+	__u32	namelen;
+	__u32	frsize;
+	__u32	padding;
+	__u32	spare[6];
+};
+
+struct fuse_file_lock {
+	__u64	start;
+	__u64	end;
+	__u32	type;
+	__u32	pid; /* tgid */
+};
+
+/**
+ * Bitmasks for fuse_setattr_in.valid
+ */
+#define FATTR_MODE	(1 << 0)
+#define FATTR_UID	(1 << 1)
+#define FATTR_GID	(1 << 2)
+#define FATTR_SIZE	(1 << 3)
+#define FATTR_ATIME	(1 << 4)
+#define FATTR_MTIME	(1 << 5)
+#define FATTR_FH	(1 << 6)
+#define FATTR_ATIME_NOW	(1 << 7)
+#define FATTR_MTIME_NOW	(1 << 8)
+#define FATTR_LOCKOWNER	(1 << 9)
+
+/**
+ * Flags returned by the OPEN request
+ *
+ * FOPEN_DIRECT_IO: bypass page cache for this open file
+ * FOPEN_KEEP_CACHE: don't invalidate the data cache on open
+ * FOPEN_NONSEEKABLE: the file is not seekable
+ */
+#define FOPEN_DIRECT_IO		(1 << 0)
+#define FOPEN_KEEP_CACHE	(1 << 1)
+#define FOPEN_NONSEEKABLE	(1 << 2)
+
+/**
+ * INIT request/reply flags
+ *
+ * FUSE_POSIX_LOCKS: remote locking for POSIX file locks
+ * FUSE_EXPORT_SUPPORT: filesystem handles lookups of "." and ".."
+ * FUSE_DONT_MASK: don't apply umask to file mode on create operations
+ * FUSE_FLOCK_LOCKS: remote locking for BSD style file locks
+ */
+#define FUSE_ASYNC_READ		(1 << 0)
+#define FUSE_POSIX_LOCKS	(1 << 1)
+#define FUSE_FILE_OPS		(1 << 2)
+#define FUSE_ATOMIC_O_TRUNC	(1 << 3)
+#define FUSE_EXPORT_SUPPORT	(1 << 4)
+#define FUSE_BIG_WRITES		(1 << 5)
+#define FUSE_DONT_MASK		(1 << 6)
+#define FUSE_FLOCK_LOCKS	(1 << 10)
+
+/**
+ * CUSE INIT request/reply flags
+ *
+ * CUSE_UNRESTRICTED_IOCTL:  use unrestricted ioctl
+ */
+#define CUSE_UNRESTRICTED_IOCTL	(1 << 0)
+
+/**
+ * Release flags
+ */
+#define FUSE_RELEASE_FLUSH	(1 << 0)
+#define FUSE_RELEASE_FLOCK_UNLOCK	(1 << 1)
+
+/**
+ * Getattr flags
+ */
+#define FUSE_GETATTR_FH		(1 << 0)
+
+/**
+ * Lock flags
+ */
+#define FUSE_LK_FLOCK		(1 << 0)
+
+/**
+ * WRITE flags
+ *
+ * FUSE_WRITE_CACHE: delayed write from page cache, file handle is guessed
+ * FUSE_WRITE_LOCKOWNER: lock_owner field is valid
+ */
+#define FUSE_WRITE_CACHE	(1 << 0)
+#define FUSE_WRITE_LOCKOWNER	(1 << 1)
+
+/**
+ * Read flags
+ */
+#define FUSE_READ_LOCKOWNER	(1 << 1)
+
+/**
+ * Ioctl flags
+ *
+ * FUSE_IOCTL_COMPAT: 32bit compat ioctl on 64bit machine
+ * FUSE_IOCTL_UNRESTRICTED: not restricted to well-formed ioctls, retry allowed
+ * FUSE_IOCTL_RETRY: retry with new iovecs
+ * FUSE_IOCTL_32BIT: 32bit ioctl
+ * FUSE_IOCTL_DIR: is a directory
+ *
+ * FUSE_IOCTL_MAX_IOV: maximum of in_iovecs + out_iovecs
+ */
+#define FUSE_IOCTL_COMPAT	(1 << 0)
+#define FUSE_IOCTL_UNRESTRICTED	(1 << 1)
+#define FUSE_IOCTL_RETRY	(1 << 2)
+#define FUSE_IOCTL_32BIT	(1 << 3)
+#define FUSE_IOCTL_DIR		(1 << 4)
+
+#define FUSE_IOCTL_MAX_IOV	256
+
+/**
+ * Poll flags
+ *
+ * FUSE_POLL_SCHEDULE_NOTIFY: request poll notify
+ */
+#define FUSE_POLL_SCHEDULE_NOTIFY (1 << 0)
+
+enum fuse_opcode {
+	FUSE_LOOKUP	   = 1,
+	FUSE_FORGET	   = 2,  /* no reply */
+	FUSE_GETATTR	   = 3,
+	FUSE_SETATTR	   = 4,
+	FUSE_READLINK	   = 5,
+	FUSE_SYMLINK	   = 6,
+	FUSE_MKNOD	   = 8,
+	FUSE_MKDIR	   = 9,
+	FUSE_UNLINK	   = 10,
+	FUSE_RMDIR	   = 11,
+	FUSE_RENAME	   = 12,
+	FUSE_LINK	   = 13,
+	FUSE_OPEN	   = 14,
+	FUSE_READ	   = 15,
+	FUSE_WRITE	   = 16,
+	FUSE_STATFS	   = 17,
+	FUSE_RELEASE       = 18,
+	FUSE_FSYNC         = 20,
+	FUSE_SETXATTR      = 21,
+	FUSE_GETXATTR      = 22,
+	FUSE_LISTXATTR     = 23,
+	FUSE_REMOVEXATTR   = 24,
+	FUSE_FLUSH         = 25,
+	FUSE_INIT          = 26,
+	FUSE_OPENDIR       = 27,
+	FUSE_READDIR       = 28,
+	FUSE_RELEASEDIR    = 29,
+	FUSE_FSYNCDIR      = 30,
+	FUSE_GETLK         = 31,
+	FUSE_SETLK         = 32,
+	FUSE_SETLKW        = 33,
+	FUSE_ACCESS        = 34,
+	FUSE_CREATE        = 35,
+	FUSE_INTERRUPT     = 36,
+	FUSE_BMAP          = 37,
+	FUSE_DESTROY       = 38,
+	FUSE_IOCTL         = 39,
+	FUSE_POLL          = 40,
+	FUSE_NOTIFY_REPLY  = 41,
+	FUSE_BATCH_FORGET  = 42,
+
+	/* CUSE specific operations */
+	CUSE_INIT          = 4096,
+};
+
+enum fuse_notify_code {
+	FUSE_NOTIFY_POLL   = 1,
+	FUSE_NOTIFY_INVAL_INODE = 2,
+	FUSE_NOTIFY_INVAL_ENTRY = 3,
+	FUSE_NOTIFY_STORE = 4,
+	FUSE_NOTIFY_RETRIEVE = 5,
+	FUSE_NOTIFY_DELETE = 6,
+	FUSE_NOTIFY_CODE_MAX,
+};
+
+/* The read buffer is required to be at least 8k, but may be much larger */
+#define FUSE_MIN_READ_BUFFER 8192
+
+#define FUSE_COMPAT_ENTRY_OUT_SIZE 120
+
+struct fuse_entry_out {
+	__u64	nodeid;		/* Inode ID */
+	__u64	generation;	/* Inode generation: nodeid:gen must
+				   be unique for the fs's lifetime */
+	__u64	entry_valid;	/* Cache timeout for the name */
+	__u64	attr_valid;	/* Cache timeout for the attributes */
+	__u32	entry_valid_nsec;
+	__u32	attr_valid_nsec;
+	struct fuse_attr attr;
+};
+
+struct fuse_forget_in {
+	__u64	nlookup;
+};
+
+struct fuse_forget_one {
+	__u64	nodeid;
+	__u64	nlookup;
+};
+
+struct fuse_batch_forget_in {
+	__u32	count;
+	__u32	dummy;
+};
+
+struct fuse_getattr_in {
+	__u32	getattr_flags;
+	__u32	dummy;
+	__u64	fh;
+};
+
+#define FUSE_COMPAT_ATTR_OUT_SIZE 96
+
+struct fuse_attr_out {
+	__u64	attr_valid;	/* Cache timeout for the attributes */
+	__u32	attr_valid_nsec;
+	__u32	dummy;
+	struct fuse_attr attr;
+};
+
+#define FUSE_COMPAT_MKNOD_IN_SIZE 8
+
+struct fuse_mknod_in {
+	__u32	mode;
+	__u32	rdev;
+	__u32	umask;
+	__u32	padding;
+};
+
+struct fuse_mkdir_in {
+	__u32	mode;
+	__u32	umask;
+};
+
+struct fuse_rename_in {
+	__u64	newdir;
+};
+
+struct fuse_link_in {
+	__u64	oldnodeid;
+};
+
+struct fuse_setattr_in {
+	__u32	valid;
+	__u32	padding;
+	__u64	fh;
+	__u64	size;
+	__u64	lock_owner;
+	__u64	atime;
+	__u64	mtime;
+	__u64	unused2;
+	__u32	atimensec;
+	__u32	mtimensec;
+	__u32	unused3;
+	__u32	mode;
+	__u32	unused4;
+	__u32	uid;
+	__u32	gid;
+	__u32	unused5;
+};
+
+struct fuse_open_in {
+	__u32	flags;
+	__u32	unused;
+};
+
+struct fuse_create_in {
+	__u32	flags;
+	__u32	mode;
+	__u32	umask;
+	__u32	padding;
+};
+
+struct fuse_open_out {
+	__u64	fh;
+	__u32	open_flags;
+	__u32	padding;
+};
+
+struct fuse_release_in {
+	__u64	fh;
+	__u32	flags;
+	__u32	release_flags;
+	__u64	lock_owner;
+};
+
+struct fuse_flush_in {
+	__u64	fh;
+	__u32	unused;
+	__u32	padding;
+	__u64	lock_owner;
+};
+
+struct fuse_read_in {
+	__u64	fh;
+	__u64	offset;
+	__u32	size;
+	__u32	read_flags;
+	__u64	lock_owner;
+	__u32	flags;
+	__u32	padding;
+};
+
+#define FUSE_COMPAT_WRITE_IN_SIZE 24
+
+struct fuse_write_in {
+	__u64	fh;
+	__u64	offset;
+	__u32	size;
+	__u32	write_flags;
+	__u64	lock_owner;
+	__u32	flags;
+	__u32	padding;
+};
+
+struct fuse_write_out {
+	__u32	size;
+	__u32	padding;
+};
+
+#define FUSE_COMPAT_STATFS_SIZE 48
+
+struct fuse_statfs_out {
+	struct fuse_kstatfs st;
+};
+
+struct fuse_fsync_in {
+	__u64	fh;
+	__u32	fsync_flags;
+	__u32	padding;
+};
+
+struct fuse_setxattr_in {
+	__u32	size;
+	__u32	flags;
+};
+
+struct fuse_getxattr_in {
+	__u32	size;
+	__u32	padding;
+};
+
+struct fuse_getxattr_out {
+	__u32	size;
+	__u32	padding;
+};
+
+struct fuse_lk_in {
+	__u64	fh;
+	__u64	owner;
+	struct fuse_file_lock lk;
+	__u32	lk_flags;
+	__u32	padding;
+};
+
+struct fuse_lk_out {
+	struct fuse_file_lock lk;
+};
+
+struct fuse_access_in {
+	__u32	mask;
+	__u32	padding;
+};
+
+struct fuse_init_in {
+	__u32	major;
+	__u32	minor;
+	__u32	max_readahead;
+	__u32	flags;
+};
+
+struct fuse_init_out {
+	__u32	major;
+	__u32	minor;
+	__u32	max_readahead;
+	__u32	flags;
+	__u16   max_background;
+	__u16   congestion_threshold;
+	__u32	max_write;
+};
+
+#define CUSE_INIT_INFO_MAX 4096
+
+struct cuse_init_in {
+	__u32	major;
+	__u32	minor;
+	__u32	unused;
+	__u32	flags;
+};
+
+struct cuse_init_out {
+	__u32	major;
+	__u32	minor;
+	__u32	unused;
+	__u32	flags;
+	__u32	max_read;
+	__u32	max_write;
+	__u32	dev_major;		/* chardev major */
+	__u32	dev_minor;		/* chardev minor */
+	__u32	spare[10];
+};
+
+struct fuse_interrupt_in {
+	__u64	unique;
+};
+
+struct fuse_bmap_in {
+	__u64	block;
+	__u32	blocksize;
+	__u32	padding;
+};
+
+struct fuse_bmap_out {
+	__u64	block;
+};
+
+struct fuse_ioctl_in {
+	__u64	fh;
+	__u32	flags;
+	__u32	cmd;
+	__u64	arg;
+	__u32	in_size;
+	__u32	out_size;
+};
+
+struct fuse_ioctl_iovec {
+	__u64	base;
+	__u64	len;
+};
+
+struct fuse_ioctl_out {
+	__s32	result;
+	__u32	flags;
+	__u32	in_iovs;
+	__u32	out_iovs;
+};
+
+struct fuse_poll_in {
+	__u64	fh;
+	__u64	kh;
+	__u32	flags;
+	__u32   padding;
+};
+
+struct fuse_poll_out {
+	__u32	revents;
+	__u32	padding;
+};
+
+struct fuse_notify_poll_wakeup_out {
+	__u64	kh;
+};
+
+struct fuse_in_header {
+	__u32	len;
+	__u32	opcode;
+	__u64	unique;
+	__u64	nodeid;
+	__u32	uid;
+	__u32	gid;
+	__u32	pid;
+	__u32	padding;
+};
+
+struct fuse_out_header {
+	__u32	len;
+	__s32	error;
+	__u64	unique;
+};
+
+struct fuse_dirent {
+	__u64	ino;
+	__u64	off;
+	__u32	namelen;
+	__u32	type;
+	char name[];
+};
+
+#define FUSE_NAME_OFFSET offsetof(struct fuse_dirent, name)
+#define FUSE_DIRENT_ALIGN(x) (((x) + sizeof(__u64) - 1) & ~(sizeof(__u64) - 1))
+#define FUSE_DIRENT_SIZE(d) \
+	FUSE_DIRENT_ALIGN(FUSE_NAME_OFFSET + (d)->namelen)
+
+struct fuse_notify_inval_inode_out {
+	__u64	ino;
+	__s64	off;
+	__s64	len;
+};
+
+struct fuse_notify_inval_entry_out {
+	__u64	parent;
+	__u32	namelen;
+	__u32	padding;
+};
+
+struct fuse_notify_delete_out {
+	__u64	parent;
+	__u64	child;
+	__u32	namelen;
+	__u32	padding;
+};
+
+struct fuse_notify_store_out {
+	__u64	nodeid;
+	__u64	offset;
+	__u32	size;
+	__u32	padding;
+};
+
+struct fuse_notify_retrieve_out {
+	__u64	notify_unique;
+	__u64	nodeid;
+	__u64	offset;
+	__u32	size;
+	__u32	padding;
+};
+
+/* Matches the size of fuse_write_in */
+struct fuse_notify_retrieve_in {
+	__u64	dummy1;
+	__u64	offset;
+	__u32	size;
+	__u32	dummy2;
+	__u64	dummy3;
+	__u64	dummy4;
+};
+
+#endif /* _LINUX_FUSE_H */
diff --git a/include/linux/futex.h b/include/linux/futex.h
new file mode 100644
index 00000000..1e5a26d7
--- /dev/null
+++ b/include/linux/futex.h
@@ -0,0 +1,215 @@
+#ifndef _LINUX_FUTEX_H
+#define _LINUX_FUTEX_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+/* Second argument to futex syscall */
+
+
+#define FUTEX_WAIT		0
+#define FUTEX_WAKE		1
+#define FUTEX_FD		2
+#define FUTEX_REQUEUE		3
+#define FUTEX_CMP_REQUEUE	4
+#define FUTEX_WAKE_OP		5
+#define FUTEX_LOCK_PI		6
+#define FUTEX_UNLOCK_PI		7
+#define FUTEX_TRYLOCK_PI	8
+#define FUTEX_WAIT_BITSET	9
+#define FUTEX_WAKE_BITSET	10
+#define FUTEX_WAIT_REQUEUE_PI	11
+#define FUTEX_CMP_REQUEUE_PI	12
+
+#define FUTEX_PRIVATE_FLAG	128
+#define FUTEX_CLOCK_REALTIME	256
+#define FUTEX_CMD_MASK		~(FUTEX_PRIVATE_FLAG | FUTEX_CLOCK_REALTIME)
+
+#define FUTEX_WAIT_PRIVATE	(FUTEX_WAIT | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAKE_PRIVATE	(FUTEX_WAKE | FUTEX_PRIVATE_FLAG)
+#define FUTEX_REQUEUE_PRIVATE	(FUTEX_REQUEUE | FUTEX_PRIVATE_FLAG)
+#define FUTEX_CMP_REQUEUE_PRIVATE (FUTEX_CMP_REQUEUE | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAKE_OP_PRIVATE	(FUTEX_WAKE_OP | FUTEX_PRIVATE_FLAG)
+#define FUTEX_LOCK_PI_PRIVATE	(FUTEX_LOCK_PI | FUTEX_PRIVATE_FLAG)
+#define FUTEX_UNLOCK_PI_PRIVATE	(FUTEX_UNLOCK_PI | FUTEX_PRIVATE_FLAG)
+#define FUTEX_TRYLOCK_PI_PRIVATE (FUTEX_TRYLOCK_PI | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAIT_BITSET_PRIVATE	(FUTEX_WAIT_BITSET | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAKE_BITSET_PRIVATE	(FUTEX_WAKE_BITSET | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAIT_REQUEUE_PI_PRIVATE	(FUTEX_WAIT_REQUEUE_PI | \
+					 FUTEX_PRIVATE_FLAG)
+#define FUTEX_CMP_REQUEUE_PI_PRIVATE	(FUTEX_CMP_REQUEUE_PI | \
+					 FUTEX_PRIVATE_FLAG)
+
+/*
+ * Support for robust futexes: the kernel cleans up held futexes at
+ * thread exit time.
+ */
+
+/*
+ * Per-lock list entry - embedded in user-space locks, somewhere close
+ * to the futex field. (Note: user-space uses a double-linked list to
+ * achieve O(1) list add and remove, but the kernel only needs to know
+ * about the forward link)
+ *
+ * NOTE: this structure is part of the syscall ABI, and must not be
+ * changed.
+ */
+struct robust_list {
+	struct robust_list __user *next;
+};
+
+/*
+ * Per-thread list head:
+ *
+ * NOTE: this structure is part of the syscall ABI, and must only be
+ * changed if the change is first communicated with the glibc folks.
+ * (When an incompatible change is done, we'll increase the structure
+ *  size, which glibc will detect)
+ */
+struct robust_list_head {
+	/*
+	 * The head of the list. Points back to itself if empty:
+	 */
+	struct robust_list list;
+
+	/*
+	 * This relative offset is set by user-space, it gives the kernel
+	 * the relative position of the futex field to examine. This way
+	 * we keep userspace flexible, to freely shape its data-structure,
+	 * without hardcoding any particular offset into the kernel:
+	 */
+	long futex_offset;
+
+	/*
+	 * The death of the thread may race with userspace setting
+	 * up a lock's links. So to handle this race, userspace first
+	 * sets this field to the address of the to-be-taken lock,
+	 * then does the lock acquire, and then adds itself to the
+	 * list, and then clears this field. Hence the kernel will
+	 * always have full knowledge of all locks that the thread
+	 * _might_ have taken. We check the owner TID in any case,
+	 * so only truly owned locks will be handled.
+	 */
+	struct robust_list __user *list_op_pending;
+};
+
+/*
+ * Are there any waiters for this robust futex:
+ */
+#define FUTEX_WAITERS		0x80000000
+
+/*
+ * The kernel signals via this bit that a thread holding a futex
+ * has exited without unlocking the futex. The kernel also does
+ * a FUTEX_WAKE on such futexes, after setting the bit, to wake
+ * up any possible waiters:
+ */
+#define FUTEX_OWNER_DIED	0x40000000
+
+/*
+ * The rest of the robust-futex field is for the TID:
+ */
+#define FUTEX_TID_MASK		0x3fffffff
+
+/*
+ * This limit protects against a deliberately circular list.
+ * (Not worth introducing an rlimit for it)
+ */
+#define ROBUST_LIST_LIMIT	2048
+
+/*
+ * bitset with all bits set for the FUTEX_xxx_BITSET OPs to request a
+ * match of any bit.
+ */
+#define FUTEX_BITSET_MATCH_ANY	0xffffffff
+
+#ifdef __KERNEL__
+struct inode;
+struct mm_struct;
+struct task_struct;
+union ktime;
+
+long do_futex(u32 __user *uaddr, int op, u32 val, union ktime *timeout,
+	      u32 __user *uaddr2, u32 val2, u32 val3);
+
+extern int
+handle_futex_death(u32 __user *uaddr, struct task_struct *curr, int pi);
+
+/*
+ * Futexes are matched on equal values of this key.
+ * The key type depends on whether it's a shared or private mapping.
+ * Don't rearrange members without looking at hash_futex().
+ *
+ * offset is aligned to a multiple of sizeof(u32) (== 4) by definition.
+ * We use the two low order bits of offset to tell what is the kind of key :
+ *  00 : Private process futex (PTHREAD_PROCESS_PRIVATE)
+ *       (no reference on an inode or mm)
+ *  01 : Shared futex (PTHREAD_PROCESS_SHARED)
+ *	mapped on a file (reference on the underlying inode)
+ *  10 : Shared futex (PTHREAD_PROCESS_SHARED)
+ *       (but private mapping on an mm, and reference taken on it)
+*/
+
+#define FUT_OFF_INODE    1 /* We set bit 0 if key has a reference on inode */
+#define FUT_OFF_MMSHARED 2 /* We set bit 1 if key has a reference on mm */
+
+union futex_key {
+	struct {
+		unsigned long pgoff;
+		struct inode *inode;
+		int offset;
+	} shared;
+	struct {
+		unsigned long address;
+		struct mm_struct *mm;
+		int offset;
+	} private;
+	struct {
+		unsigned long word;
+		void *ptr;
+		int offset;
+	} both;
+};
+
+#define FUTEX_KEY_INIT (union futex_key) { .both = { .ptr = NULL } }
+
+#ifdef CONFIG_FUTEX
+extern void exit_robust_list(struct task_struct *curr);
+extern void exit_pi_state_list(struct task_struct *curr);
+extern int futex_cmpxchg_enabled;
+#else
+static inline void exit_robust_list(struct task_struct *curr)
+{
+}
+static inline void exit_pi_state_list(struct task_struct *curr)
+{
+}
+#endif
+#endif /* __KERNEL__ */
+
+#define FUTEX_OP_SET		0	/* *(int *)UADDR2 = OPARG; */
+#define FUTEX_OP_ADD		1	/* *(int *)UADDR2 += OPARG; */
+#define FUTEX_OP_OR		2	/* *(int *)UADDR2 |= OPARG; */
+#define FUTEX_OP_ANDN		3	/* *(int *)UADDR2 &= ~OPARG; */
+#define FUTEX_OP_XOR		4	/* *(int *)UADDR2 ^= OPARG; */
+
+#define FUTEX_OP_OPARG_SHIFT	8	/* Use (1 << OPARG) instead of OPARG.  */
+
+#define FUTEX_OP_CMP_EQ		0	/* if (oldval == CMPARG) wake */
+#define FUTEX_OP_CMP_NE		1	/* if (oldval != CMPARG) wake */
+#define FUTEX_OP_CMP_LT		2	/* if (oldval < CMPARG) wake */
+#define FUTEX_OP_CMP_LE		3	/* if (oldval <= CMPARG) wake */
+#define FUTEX_OP_CMP_GT		4	/* if (oldval > CMPARG) wake */
+#define FUTEX_OP_CMP_GE		5	/* if (oldval >= CMPARG) wake */
+
+/* FUTEX_WAKE_OP will perform atomically
+   int oldval = *(int *)UADDR2;
+   *(int *)UADDR2 = oldval OP OPARG;
+   if (oldval CMP CMPARG)
+     wake UADDR2;  */
+
+#define FUTEX_OP(op, oparg, cmp, cmparg) \
+  (((op & 0xf) << 28) | ((cmp & 0xf) << 24)		\
+   | ((oparg & 0xfff) << 12) | (cmparg & 0xfff))
+
+#endif
diff --git a/include/linux/gameport.h b/include/linux/gameport.h
new file mode 100644
index 00000000..b456b08d
--- /dev/null
+++ b/include/linux/gameport.h
@@ -0,0 +1,226 @@
+#ifndef _GAMEPORT_H
+#define _GAMEPORT_H
+
+/*
+ *  Copyright (c) 1999-2002 Vojtech Pavlik
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifdef __KERNEL__
+#include <asm/io.h>
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+#include <linux/timer.h>
+#include <linux/slab.h>
+
+struct gameport {
+
+	void *port_data;	/* Private pointer for gameport drivers */
+	char name[32];
+	char phys[32];
+
+	int io;
+	int speed;
+	int fuzz;
+
+	void (*trigger)(struct gameport *);
+	unsigned char (*read)(struct gameport *);
+	int (*cooked_read)(struct gameport *, int *, int *);
+	int (*calibrate)(struct gameport *, int *, int *);
+	int (*open)(struct gameport *, int);
+	void (*close)(struct gameport *);
+
+	struct timer_list poll_timer;
+	unsigned int poll_interval;	/* in msecs */
+	spinlock_t timer_lock;
+	unsigned int poll_cnt;
+	void (*poll_handler)(struct gameport *);
+
+	struct gameport *parent, *child;
+
+	struct gameport_driver *drv;
+	struct mutex drv_mutex;		/* protects serio->drv so attributes can pin driver */
+
+	struct device dev;
+
+	struct list_head node;
+};
+#define to_gameport_port(d)	container_of(d, struct gameport, dev)
+
+struct gameport_driver {
+	const char *description;
+
+	int (*connect)(struct gameport *, struct gameport_driver *drv);
+	int (*reconnect)(struct gameport *);
+	void (*disconnect)(struct gameport *);
+
+	struct device_driver driver;
+
+	bool ignore;
+};
+#define to_gameport_driver(d)	container_of(d, struct gameport_driver, driver)
+
+int gameport_open(struct gameport *gameport, struct gameport_driver *drv, int mode);
+void gameport_close(struct gameport *gameport);
+
+#if defined(CONFIG_GAMEPORT) || (defined(MODULE) && defined(CONFIG_GAMEPORT_MODULE))
+
+void __gameport_register_port(struct gameport *gameport, struct module *owner);
+/* use a define to avoid include chaining to get THIS_MODULE */
+#define gameport_register_port(gameport) \
+	__gameport_register_port(gameport, THIS_MODULE)
+
+void gameport_unregister_port(struct gameport *gameport);
+
+__printf(2, 3)
+void gameport_set_phys(struct gameport *gameport, const char *fmt, ...);
+
+#else
+
+static inline void gameport_register_port(struct gameport *gameport)
+{
+	return;
+}
+
+static inline void gameport_unregister_port(struct gameport *gameport)
+{
+	return;
+}
+
+static inline __printf(2, 3)
+void gameport_set_phys(struct gameport *gameport, const char *fmt, ...)
+{
+	return;
+}
+
+#endif
+
+static inline struct gameport *gameport_allocate_port(void)
+{
+	struct gameport *gameport = kzalloc(sizeof(struct gameport), GFP_KERNEL);
+
+	return gameport;
+}
+
+static inline void gameport_free_port(struct gameport *gameport)
+{
+	kfree(gameport);
+}
+
+static inline void gameport_set_name(struct gameport *gameport, const char *name)
+{
+	strlcpy(gameport->name, name, sizeof(gameport->name));
+}
+
+/*
+ * Use the following functions to manipulate gameport's per-port
+ * driver-specific data.
+ */
+static inline void *gameport_get_drvdata(struct gameport *gameport)
+{
+	return dev_get_drvdata(&gameport->dev);
+}
+
+static inline void gameport_set_drvdata(struct gameport *gameport, void *data)
+{
+	dev_set_drvdata(&gameport->dev, data);
+}
+
+/*
+ * Use the following functions to pin gameport's driver in process context
+ */
+static inline int gameport_pin_driver(struct gameport *gameport)
+{
+	return mutex_lock_interruptible(&gameport->drv_mutex);
+}
+
+static inline void gameport_unpin_driver(struct gameport *gameport)
+{
+	mutex_unlock(&gameport->drv_mutex);
+}
+
+int __must_check __gameport_register_driver(struct gameport_driver *drv,
+				struct module *owner, const char *mod_name);
+
+/* use a define to avoid include chaining to get THIS_MODULE & friends */
+#define gameport_register_driver(drv) \
+	__gameport_register_driver(drv, THIS_MODULE, KBUILD_MODNAME)
+
+void gameport_unregister_driver(struct gameport_driver *drv);
+
+#endif /* __KERNEL__ */
+
+#define GAMEPORT_MODE_DISABLED		0
+#define GAMEPORT_MODE_RAW		1
+#define GAMEPORT_MODE_COOKED		2
+
+#define GAMEPORT_ID_VENDOR_ANALOG	0x0001
+#define GAMEPORT_ID_VENDOR_MADCATZ	0x0002
+#define GAMEPORT_ID_VENDOR_LOGITECH	0x0003
+#define GAMEPORT_ID_VENDOR_CREATIVE	0x0004
+#define GAMEPORT_ID_VENDOR_GENIUS	0x0005
+#define GAMEPORT_ID_VENDOR_INTERACT	0x0006
+#define GAMEPORT_ID_VENDOR_MICROSOFT	0x0007
+#define GAMEPORT_ID_VENDOR_THRUSTMASTER	0x0008
+#define GAMEPORT_ID_VENDOR_GRAVIS	0x0009
+#define GAMEPORT_ID_VENDOR_GUILLEMOT	0x000a
+
+#ifdef __KERNEL__
+
+static inline void gameport_trigger(struct gameport *gameport)
+{
+	if (gameport->trigger)
+		gameport->trigger(gameport);
+	else
+		outb(0xff, gameport->io);
+}
+
+static inline unsigned char gameport_read(struct gameport *gameport)
+{
+	if (gameport->read)
+		return gameport->read(gameport);
+	else
+		return inb(gameport->io);
+}
+
+static inline int gameport_cooked_read(struct gameport *gameport, int *axes, int *buttons)
+{
+	if (gameport->cooked_read)
+		return gameport->cooked_read(gameport, axes, buttons);
+	else
+		return -1;
+}
+
+static inline int gameport_calibrate(struct gameport *gameport, int *axes, int *max)
+{
+	if (gameport->calibrate)
+		return gameport->calibrate(gameport, axes, max);
+	else
+		return -1;
+}
+
+static inline int gameport_time(struct gameport *gameport, int time)
+{
+	return (time * gameport->speed) / 1000;
+}
+
+static inline void gameport_set_poll_handler(struct gameport *gameport, void (*handler)(struct gameport *))
+{
+	gameport->poll_handler = handler;
+}
+
+static inline void gameport_set_poll_interval(struct gameport *gameport, unsigned int msecs)
+{
+	gameport->poll_interval = msecs;
+}
+
+void gameport_start_polling(struct gameport *gameport);
+void gameport_stop_polling(struct gameport *gameport);
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/include/linux/gcd.h b/include/linux/gcd.h
new file mode 100644
index 00000000..69f5e8a0
--- /dev/null
+++ b/include/linux/gcd.h
@@ -0,0 +1,8 @@
+#ifndef _GCD_H
+#define _GCD_H
+
+#include <linux/compiler.h>
+
+unsigned long gcd(unsigned long a, unsigned long b) __attribute_const__;
+
+#endif /* _GCD_H */
diff --git a/include/linux/gen_stats.h b/include/linux/gen_stats.h
new file mode 100644
index 00000000..552c8a0a
--- /dev/null
+++ b/include/linux/gen_stats.h
@@ -0,0 +1,67 @@
+#ifndef __LINUX_GEN_STATS_H
+#define __LINUX_GEN_STATS_H
+
+#include <linux/types.h>
+
+enum {
+	TCA_STATS_UNSPEC,
+	TCA_STATS_BASIC,
+	TCA_STATS_RATE_EST,
+	TCA_STATS_QUEUE,
+	TCA_STATS_APP,
+	__TCA_STATS_MAX,
+};
+#define TCA_STATS_MAX (__TCA_STATS_MAX - 1)
+
+/**
+ * struct gnet_stats_basic - byte/packet throughput statistics
+ * @bytes: number of seen bytes
+ * @packets: number of seen packets
+ */
+struct gnet_stats_basic {
+	__u64	bytes;
+	__u32	packets;
+};
+struct gnet_stats_basic_packed {
+	__u64	bytes;
+	__u32	packets;
+} __attribute__ ((packed));
+
+/**
+ * struct gnet_stats_rate_est - rate estimator
+ * @bps: current byte rate
+ * @pps: current packet rate
+ */
+struct gnet_stats_rate_est {
+	__u32	bps;
+	__u32	pps;
+};
+
+/**
+ * struct gnet_stats_queue - queuing statistics
+ * @qlen: queue length
+ * @backlog: backlog size of queue
+ * @drops: number of dropped packets
+ * @requeues: number of requeues
+ * @overlimits: number of enqueues over the limit
+ */
+struct gnet_stats_queue {
+	__u32	qlen;
+	__u32	backlog;
+	__u32	drops;
+	__u32	requeues;
+	__u32	overlimits;
+};
+
+/**
+ * struct gnet_estimator - rate estimator configuration
+ * @interval: sampling period
+ * @ewma_log: the log of measurement window weight
+ */
+struct gnet_estimator {
+	signed char	interval;
+	unsigned char	ewma_log;
+};
+
+
+#endif /* __LINUX_GEN_STATS_H */
diff --git a/include/linux/genalloc.h b/include/linux/genalloc.h
new file mode 100644
index 00000000..5e98eeb2
--- /dev/null
+++ b/include/linux/genalloc.h
@@ -0,0 +1,81 @@
+/*
+ * Basic general purpose allocator for managing special purpose
+ * memory, for example, memory that is not managed by the regular
+ * kmalloc/kfree interface.  Uses for this includes on-device special
+ * memory, uncached memory etc.
+ *
+ * It is safe to use the allocator in NMI handlers and other special
+ * unblockable contexts that could otherwise deadlock on locks.  This
+ * is implemented by using atomic operations and retries on any
+ * conflicts.  The disadvantage is that there may be livelocks in
+ * extreme cases.  For better scalability, one allocator can be used
+ * for each CPU.
+ *
+ * The lockless operation only works if there is enough memory
+ * available.  If new memory is added to the pool a lock has to be
+ * still taken.  So any user relying on locklessness has to ensure
+ * that sufficient memory is preallocated.
+ *
+ * The basic atomic operation of this allocator is cmpxchg on long.
+ * On architectures that don't have NMI-safe cmpxchg implementation,
+ * the allocator can NOT be used in NMI handler.  So code uses the
+ * allocator in NMI handler should depend on
+ * CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG.
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2.  See the file COPYING for more details.
+ */
+
+
+#ifndef __GENALLOC_H__
+#define __GENALLOC_H__
+/*
+ *  General purpose special memory pool descriptor.
+ */
+struct gen_pool {
+	spinlock_t lock;
+	struct list_head chunks;	/* list of chunks in this pool */
+	int min_alloc_order;		/* minimum allocation order */
+};
+
+/*
+ *  General purpose special memory pool chunk descriptor.
+ */
+struct gen_pool_chunk {
+	struct list_head next_chunk;	/* next chunk in pool */
+	atomic_t avail;
+	phys_addr_t phys_addr;		/* physical starting address of memory chunk */
+	unsigned long start_addr;	/* starting address of memory chunk */
+	unsigned long end_addr;		/* ending address of memory chunk */
+	unsigned long bits[0];		/* bitmap for allocating memory chunk */
+};
+
+extern struct gen_pool *gen_pool_create(int, int);
+extern phys_addr_t gen_pool_virt_to_phys(struct gen_pool *pool, unsigned long);
+extern int gen_pool_add_virt(struct gen_pool *, unsigned long, phys_addr_t,
+			     size_t, int);
+/**
+ * gen_pool_add - add a new chunk of special memory to the pool
+ * @pool: pool to add new memory chunk to
+ * @addr: starting address of memory chunk to add to pool
+ * @size: size in bytes of the memory chunk to add to pool
+ * @nid: node id of the node the chunk structure and bitmap should be
+ *       allocated on, or -1
+ *
+ * Add a new chunk of special memory to the specified pool.
+ *
+ * Returns 0 on success or a -ve errno on failure.
+ */
+static inline int gen_pool_add(struct gen_pool *pool, unsigned long addr,
+			       size_t size, int nid)
+{
+	return gen_pool_add_virt(pool, addr, -1, size, nid);
+}
+extern void gen_pool_destroy(struct gen_pool *);
+extern unsigned long gen_pool_alloc(struct gen_pool *, size_t);
+extern void gen_pool_free(struct gen_pool *, unsigned long, size_t);
+extern void gen_pool_for_each_chunk(struct gen_pool *,
+	void (*)(struct gen_pool *, struct gen_pool_chunk *, void *), void *);
+extern size_t gen_pool_avail(struct gen_pool *);
+extern size_t gen_pool_size(struct gen_pool *);
+#endif /* __GENALLOC_H__ */
diff --git a/include/linux/generic_acl.h b/include/linux/generic_acl.h
new file mode 100644
index 00000000..b6d65754
--- /dev/null
+++ b/include/linux/generic_acl.h
@@ -0,0 +1,14 @@
+#ifndef LINUX_GENERIC_ACL_H
+#define LINUX_GENERIC_ACL_H
+
+#include <linux/xattr.h>
+
+struct inode;
+
+extern const struct xattr_handler generic_acl_access_handler;
+extern const struct xattr_handler generic_acl_default_handler;
+
+int generic_acl_init(struct inode *, struct inode *);
+int generic_acl_chmod(struct inode *);
+
+#endif /* LINUX_GENERIC_ACL_H */
diff --git a/include/linux/generic_serial.h b/include/linux/generic_serial.h
new file mode 100644
index 00000000..fadff285
--- /dev/null
+++ b/include/linux/generic_serial.h
@@ -0,0 +1,95 @@
+/*
+ *  generic_serial.h
+ *
+ *  Copyright (C) 1998 R.E.Wolff@BitWizard.nl
+ *
+ *  written for the SX serial driver.
+ *     Contains the code that should be shared over all the serial drivers.
+ *
+ *  Version 0.1 -- December, 1998.
+ */
+
+#ifndef GENERIC_SERIAL_H
+#define GENERIC_SERIAL_H
+
+#ifdef __KERNEL__
+#include <linux/mutex.h>
+#include <linux/tty.h>
+
+struct real_driver {
+  void                    (*disable_tx_interrupts) (void *);
+  void                    (*enable_tx_interrupts) (void *);
+  void                    (*disable_rx_interrupts) (void *);
+  void                    (*enable_rx_interrupts) (void *);
+  void                    (*shutdown_port) (void*);
+  int                     (*set_real_termios) (void*);
+  int                     (*chars_in_buffer) (void*);
+  void                    (*close) (void*);
+  void                    (*hungup) (void*);
+  void                    (*getserial) (void*, struct serial_struct *sp);
+};
+
+
+
+struct gs_port {
+  int                     magic;
+  struct tty_port	  port;
+  unsigned char           *xmit_buf; 
+  int                     xmit_head;
+  int                     xmit_tail;
+  int                     xmit_cnt;
+  struct mutex            port_write_mutex;
+  unsigned long           event;
+  unsigned short          closing_wait;
+  int                     close_delay;
+  struct real_driver      *rd;
+  int                     wakeup_chars;
+  int                     baud_base;
+  int                     baud;
+  int                     custom_divisor;
+  spinlock_t              driver_lock;
+};
+
+#endif /* __KERNEL__ */
+
+/* Flags */
+/* Warning: serial.h defines some ASYNC_ flags, they say they are "only"
+   used in serial.c, but they are also used in all other serial drivers. 
+   Make sure they don't clash with these here... */
+#define GS_TX_INTEN      0x00800000
+#define GS_RX_INTEN      0x00400000
+#define GS_ACTIVE        0x00200000
+
+
+
+#define GS_TYPE_NORMAL   1
+
+#define GS_DEBUG_FLUSH   0x00000001
+#define GS_DEBUG_BTR     0x00000002
+#define GS_DEBUG_TERMIOS 0x00000004
+#define GS_DEBUG_STUFF   0x00000008
+#define GS_DEBUG_CLOSE   0x00000010
+#define GS_DEBUG_FLOW    0x00000020
+#define GS_DEBUG_WRITE   0x00000040
+
+#ifdef __KERNEL__
+int gs_put_char(struct tty_struct *tty, unsigned char ch);
+int  gs_write(struct tty_struct *tty, 
+             const unsigned char *buf, int count);
+int  gs_write_room(struct tty_struct *tty);
+int  gs_chars_in_buffer(struct tty_struct *tty);
+void gs_flush_buffer(struct tty_struct *tty);
+void gs_flush_chars(struct tty_struct *tty);
+void gs_stop(struct tty_struct *tty);
+void gs_start(struct tty_struct *tty);
+void gs_hangup(struct tty_struct *tty);
+int  gs_block_til_ready(void *port, struct file *filp);
+void gs_close(struct tty_struct *tty, struct file *filp);
+void gs_set_termios (struct tty_struct * tty, 
+                     struct ktermios * old_termios);
+int  gs_init_port(struct gs_port *port);
+int  gs_setserial(struct gs_port *port, struct serial_struct __user *sp);
+int  gs_getserial(struct gs_port *port, struct serial_struct __user *sp);
+void gs_got_break(struct gs_port *port);
+#endif /* __KERNEL__ */
+#endif
diff --git a/include/linux/genetlink.h b/include/linux/genetlink.h
new file mode 100644
index 00000000..73c28dea
--- /dev/null
+++ b/include/linux/genetlink.h
@@ -0,0 +1,115 @@
+#ifndef __LINUX_GENERIC_NETLINK_H
+#define __LINUX_GENERIC_NETLINK_H
+
+#include <linux/types.h>
+#include <linux/netlink.h>
+
+#define GENL_NAMSIZ	16	/* length of family name */
+
+#define GENL_MIN_ID	NLMSG_MIN_TYPE
+#define GENL_MAX_ID	1023
+
+struct genlmsghdr {
+	__u8	cmd;
+	__u8	version;
+	__u16	reserved;
+};
+
+#define GENL_HDRLEN	NLMSG_ALIGN(sizeof(struct genlmsghdr))
+
+#define GENL_ADMIN_PERM		0x01
+#define GENL_CMD_CAP_DO		0x02
+#define GENL_CMD_CAP_DUMP	0x04
+#define GENL_CMD_CAP_HASPOL	0x08
+
+/*
+ * List of reserved static generic netlink identifiers:
+ */
+#define GENL_ID_GENERATE	0
+#define GENL_ID_CTRL		NLMSG_MIN_TYPE
+
+/**************************************************************************
+ * Controller
+ **************************************************************************/
+
+enum {
+	CTRL_CMD_UNSPEC,
+	CTRL_CMD_NEWFAMILY,
+	CTRL_CMD_DELFAMILY,
+	CTRL_CMD_GETFAMILY,
+	CTRL_CMD_NEWOPS,
+	CTRL_CMD_DELOPS,
+	CTRL_CMD_GETOPS,
+	CTRL_CMD_NEWMCAST_GRP,
+	CTRL_CMD_DELMCAST_GRP,
+	CTRL_CMD_GETMCAST_GRP, /* unused */
+	__CTRL_CMD_MAX,
+};
+
+#define CTRL_CMD_MAX (__CTRL_CMD_MAX - 1)
+
+enum {
+	CTRL_ATTR_UNSPEC,
+	CTRL_ATTR_FAMILY_ID,
+	CTRL_ATTR_FAMILY_NAME,
+	CTRL_ATTR_VERSION,
+	CTRL_ATTR_HDRSIZE,
+	CTRL_ATTR_MAXATTR,
+	CTRL_ATTR_OPS,
+	CTRL_ATTR_MCAST_GROUPS,
+	__CTRL_ATTR_MAX,
+};
+
+#define CTRL_ATTR_MAX (__CTRL_ATTR_MAX - 1)
+
+enum {
+	CTRL_ATTR_OP_UNSPEC,
+	CTRL_ATTR_OP_ID,
+	CTRL_ATTR_OP_FLAGS,
+	__CTRL_ATTR_OP_MAX,
+};
+
+#define CTRL_ATTR_OP_MAX (__CTRL_ATTR_OP_MAX - 1)
+
+enum {
+	CTRL_ATTR_MCAST_GRP_UNSPEC,
+	CTRL_ATTR_MCAST_GRP_NAME,
+	CTRL_ATTR_MCAST_GRP_ID,
+	__CTRL_ATTR_MCAST_GRP_MAX,
+};
+
+#define CTRL_ATTR_MCAST_GRP_MAX (__CTRL_ATTR_MCAST_GRP_MAX - 1)
+
+#ifdef __KERNEL__
+
+/* All generic netlink requests are serialized by a global lock.  */
+extern void genl_lock(void);
+extern void genl_unlock(void);
+#ifdef CONFIG_PROVE_LOCKING
+extern int lockdep_genl_is_held(void);
+#endif
+
+/**
+ * rcu_dereference_genl - rcu_dereference with debug checking
+ * @p: The pointer to read, prior to dereferencing
+ *
+ * Do an rcu_dereference(p), but check caller either holds rcu_read_lock()
+ * or genl mutex. Note : Please prefer genl_dereference() or rcu_dereference()
+ */
+#define rcu_dereference_genl(p)					\
+	rcu_dereference_check(p, lockdep_genl_is_held())
+
+/**
+ * genl_dereference - fetch RCU pointer when updates are prevented by genl mutex
+ * @p: The pointer to read, prior to dereferencing
+ *
+ * Return the value of the specified RCU-protected pointer, but omit
+ * both the smp_read_barrier_depends() and the ACCESS_ONCE(), because
+ * caller holds genl mutex.
+ */
+#define genl_dereference(p)					\
+	rcu_dereference_protected(p, lockdep_genl_is_held())
+
+#endif /* __KERNEL__ */
+
+#endif	/* __LINUX_GENERIC_NETLINK_H */
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
new file mode 100644
index 00000000..017a7fb5
--- /dev/null
+++ b/include/linux/genhd.h
@@ -0,0 +1,663 @@
+#ifndef _LINUX_GENHD_H
+#define _LINUX_GENHD_H
+
+/*
+ * 	genhd.h Copyright (C) 1992 Drew Eckhardt
+ *	Generic hard disk header file by  
+ * 		Drew Eckhardt
+ *
+ *		<drew@colorado.edu>
+ */
+
+#include <linux/types.h>
+#include <linux/kdev_t.h>
+#include <linux/rcupdate.h>
+#include <linux/slab.h>
+
+#ifdef CONFIG_BLOCK
+
+#define kobj_to_dev(k)		container_of((k), struct device, kobj)
+#define dev_to_disk(device)	container_of((device), struct gendisk, part0.__dev)
+#define dev_to_part(device)	container_of((device), struct hd_struct, __dev)
+#define disk_to_dev(disk)	(&(disk)->part0.__dev)
+#define part_to_dev(part)	(&((part)->__dev))
+
+extern struct device_type part_type;
+extern struct kobject *block_depr;
+extern struct class block_class;
+
+enum {
+/* These three have identical behaviour; use the second one if DOS FDISK gets
+   confused about extended/logical partitions starting past cylinder 1023. */
+	DOS_EXTENDED_PARTITION = 5,
+	LINUX_EXTENDED_PARTITION = 0x85,
+	WIN98_EXTENDED_PARTITION = 0x0f,
+
+	SUN_WHOLE_DISK = DOS_EXTENDED_PARTITION,
+
+	LINUX_SWAP_PARTITION = 0x82,
+	LINUX_DATA_PARTITION = 0x83,
+	LINUX_LVM_PARTITION = 0x8e,
+	LINUX_RAID_PARTITION = 0xfd,	/* autodetect RAID partition */
+
+	SOLARIS_X86_PARTITION =	LINUX_SWAP_PARTITION,
+	NEW_SOLARIS_X86_PARTITION = 0xbf,
+
+	DM6_AUX1PARTITION = 0x51,	/* no DDO:  use xlated geom */
+	DM6_AUX3PARTITION = 0x53,	/* no DDO:  use xlated geom */
+	DM6_PARTITION =	0x54,		/* has DDO: use xlated geom & offset */
+	EZD_PARTITION =	0x55,		/* EZ-DRIVE */
+
+	FREEBSD_PARTITION = 0xa5,	/* FreeBSD Partition ID */
+	OPENBSD_PARTITION = 0xa6,	/* OpenBSD Partition ID */
+	NETBSD_PARTITION = 0xa9,	/* NetBSD Partition ID */
+	BSDI_PARTITION = 0xb7,		/* BSDI Partition ID */
+	MINIX_PARTITION = 0x81,		/* Minix Partition ID */
+	UNIXWARE_PARTITION = 0x63,	/* Same as GNU_HURD and SCO Unix */
+};
+
+#define DISK_MAX_PARTS			256
+#define DISK_NAME_LEN			32
+
+#include <linux/major.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/string.h>
+#include <linux/fs.h>
+#include <linux/workqueue.h>
+
+struct partition {
+	unsigned char boot_ind;		/* 0x80 - active */
+	unsigned char head;		/* starting head */
+	unsigned char sector;		/* starting sector */
+	unsigned char cyl;		/* starting cylinder */
+	unsigned char sys_ind;		/* What partition type */
+	unsigned char end_head;		/* end head */
+	unsigned char end_sector;	/* end sector */
+	unsigned char end_cyl;		/* end cylinder */
+	__le32 start_sect;	/* starting sector counting from 0 */
+	__le32 nr_sects;		/* nr of sectors in partition */
+} __attribute__((packed));
+
+struct disk_stats {
+	unsigned long sectors[2];	/* READs and WRITEs */
+	unsigned long ios[2];
+	unsigned long merges[2];
+	unsigned long ticks[2];
+	unsigned long io_ticks;
+	unsigned long time_in_queue;
+};
+
+#define PARTITION_META_INFO_VOLNAMELTH	64
+#define PARTITION_META_INFO_UUIDLTH	16
+
+struct partition_meta_info {
+	u8 uuid[PARTITION_META_INFO_UUIDLTH];	/* always big endian */
+	u8 volname[PARTITION_META_INFO_VOLNAMELTH];
+};
+
+struct hd_struct {
+	sector_t start_sect;
+	sector_t nr_sects;
+	sector_t alignment_offset;
+	unsigned int discard_alignment;
+	struct device __dev;
+	struct kobject *holder_dir;
+	int policy, partno;
+	struct partition_meta_info *info;
+#ifdef CONFIG_FAIL_MAKE_REQUEST
+	int make_it_fail;
+#endif
+	unsigned long stamp;
+	atomic_t in_flight[2];
+#ifdef	CONFIG_SMP
+	struct disk_stats __percpu *dkstats;
+#else
+	struct disk_stats dkstats;
+#endif
+	atomic_t ref;
+	struct rcu_head rcu_head;
+};
+
+#define GENHD_FL_REMOVABLE			1
+/* 2 is unused */
+#define GENHD_FL_MEDIA_CHANGE_NOTIFY		4
+#define GENHD_FL_CD				8
+#define GENHD_FL_UP				16
+#define GENHD_FL_SUPPRESS_PARTITION_INFO	32
+#define GENHD_FL_EXT_DEVT			64 /* allow extended devt */
+#define GENHD_FL_NATIVE_CAPACITY		128
+#define GENHD_FL_BLOCK_EVENTS_ON_EXCL_WRITE	256
+#define GENHD_FL_NO_PART_SCAN			512
+
+enum {
+	DISK_EVENT_MEDIA_CHANGE			= 1 << 0, /* media changed */
+	DISK_EVENT_EJECT_REQUEST		= 1 << 1, /* eject requested */
+};
+
+#define BLK_SCSI_MAX_CMDS	(256)
+#define BLK_SCSI_CMD_PER_LONG	(BLK_SCSI_MAX_CMDS / (sizeof(long) * 8))
+
+struct blk_scsi_cmd_filter {
+	unsigned long read_ok[BLK_SCSI_CMD_PER_LONG];
+	unsigned long write_ok[BLK_SCSI_CMD_PER_LONG];
+	struct kobject kobj;
+};
+
+struct disk_part_tbl {
+	struct rcu_head rcu_head;
+	int len;
+	struct hd_struct __rcu *last_lookup;
+	struct hd_struct __rcu *part[];
+};
+
+struct disk_events;
+
+struct gendisk {
+	/* major, first_minor and minors are input parameters only,
+	 * don't use directly.  Use disk_devt() and disk_max_parts().
+	 */
+	int major;			/* major number of driver */
+	int first_minor;
+	int minors;                     /* maximum number of minors, =1 for
+                                         * disks that can't be partitioned. */
+
+	char disk_name[DISK_NAME_LEN];	/* name of major driver */
+	char *(*devnode)(struct gendisk *gd, umode_t *mode);
+
+	unsigned int events;		/* supported events */
+	unsigned int async_events;	/* async events, subset of all */
+
+	/* Array of pointers to partitions indexed by partno.
+	 * Protected with matching bdev lock but stat and other
+	 * non-critical accesses use RCU.  Always access through
+	 * helpers.
+	 */
+	struct disk_part_tbl __rcu *part_tbl;
+	struct hd_struct part0;
+
+	const struct block_device_operations *fops;
+	struct request_queue *queue;
+	void *private_data;
+
+	int flags;
+	struct device *driverfs_dev;  // FIXME: remove
+	struct kobject *slave_dir;
+
+	struct timer_rand_state *random;
+	atomic_t sync_io;		/* RAID */
+	struct disk_events *ev;
+#ifdef  CONFIG_BLK_DEV_INTEGRITY
+	struct blk_integrity *integrity;
+#endif
+	int node_id;
+};
+
+static inline struct gendisk *part_to_disk(struct hd_struct *part)
+{
+	if (likely(part)) {
+		if (part->partno)
+			return dev_to_disk(part_to_dev(part)->parent);
+		else
+			return dev_to_disk(part_to_dev(part));
+	}
+	return NULL;
+}
+
+static inline void part_pack_uuid(const u8 *uuid_str, u8 *to)
+{
+	int i;
+	for (i = 0; i < 16; ++i) {
+		*to++ = (hex_to_bin(*uuid_str) << 4) |
+			(hex_to_bin(*(uuid_str + 1)));
+		uuid_str += 2;
+		switch (i) {
+		case 3:
+		case 5:
+		case 7:
+		case 9:
+			uuid_str++;
+			continue;
+		}
+	}
+}
+
+static inline int disk_max_parts(struct gendisk *disk)
+{
+	if (disk->flags & GENHD_FL_EXT_DEVT)
+		return DISK_MAX_PARTS;
+	return disk->minors;
+}
+
+static inline bool disk_part_scan_enabled(struct gendisk *disk)
+{
+	return disk_max_parts(disk) > 1 &&
+		!(disk->flags & GENHD_FL_NO_PART_SCAN);
+}
+
+static inline dev_t disk_devt(struct gendisk *disk)
+{
+	return disk_to_dev(disk)->devt;
+}
+
+static inline dev_t part_devt(struct hd_struct *part)
+{
+	return part_to_dev(part)->devt;
+}
+
+extern struct hd_struct *disk_get_part(struct gendisk *disk, int partno);
+
+static inline void disk_put_part(struct hd_struct *part)
+{
+	if (likely(part))
+		put_device(part_to_dev(part));
+}
+
+/*
+ * Smarter partition iterator without context limits.
+ */
+#define DISK_PITER_REVERSE	(1 << 0) /* iterate in the reverse direction */
+#define DISK_PITER_INCL_EMPTY	(1 << 1) /* include 0-sized parts */
+#define DISK_PITER_INCL_PART0	(1 << 2) /* include partition 0 */
+#define DISK_PITER_INCL_EMPTY_PART0 (1 << 3) /* include empty partition 0 */
+
+struct disk_part_iter {
+	struct gendisk		*disk;
+	struct hd_struct	*part;
+	int			idx;
+	unsigned int		flags;
+};
+
+extern void disk_part_iter_init(struct disk_part_iter *piter,
+				 struct gendisk *disk, unsigned int flags);
+extern struct hd_struct *disk_part_iter_next(struct disk_part_iter *piter);
+extern void disk_part_iter_exit(struct disk_part_iter *piter);
+
+extern struct hd_struct *disk_map_sector_rcu(struct gendisk *disk,
+					     sector_t sector);
+
+/*
+ * Macros to operate on percpu disk statistics:
+ *
+ * {disk|part|all}_stat_{add|sub|inc|dec}() modify the stat counters
+ * and should be called between disk_stat_lock() and
+ * disk_stat_unlock().
+ *
+ * part_stat_read() can be called at any time.
+ *
+ * part_stat_{add|set_all}() and {init|free}_part_stats are for
+ * internal use only.
+ */
+#ifdef	CONFIG_SMP
+#define part_stat_lock()	({ rcu_read_lock(); get_cpu(); })
+#define part_stat_unlock()	do { put_cpu(); rcu_read_unlock(); } while (0)
+
+#define __part_stat_add(cpu, part, field, addnd)			\
+	(per_cpu_ptr((part)->dkstats, (cpu))->field += (addnd))
+
+#define part_stat_read(part, field)					\
+({									\
+	typeof((part)->dkstats->field) res = 0;				\
+	unsigned int _cpu;						\
+	for_each_possible_cpu(_cpu)					\
+		res += per_cpu_ptr((part)->dkstats, _cpu)->field;	\
+	res;								\
+})
+
+static inline void part_stat_set_all(struct hd_struct *part, int value)
+{
+	int i;
+
+	for_each_possible_cpu(i)
+		memset(per_cpu_ptr(part->dkstats, i), value,
+				sizeof(struct disk_stats));
+}
+
+static inline int init_part_stats(struct hd_struct *part)
+{
+	part->dkstats = alloc_percpu(struct disk_stats);
+	if (!part->dkstats)
+		return 0;
+	return 1;
+}
+
+static inline void free_part_stats(struct hd_struct *part)
+{
+	free_percpu(part->dkstats);
+}
+
+#else /* !CONFIG_SMP */
+#define part_stat_lock()	({ rcu_read_lock(); 0; })
+#define part_stat_unlock()	rcu_read_unlock()
+
+#define __part_stat_add(cpu, part, field, addnd)				\
+	((part)->dkstats.field += addnd)
+
+#define part_stat_read(part, field)	((part)->dkstats.field)
+
+static inline void part_stat_set_all(struct hd_struct *part, int value)
+{
+	memset(&part->dkstats, value, sizeof(struct disk_stats));
+}
+
+static inline int init_part_stats(struct hd_struct *part)
+{
+	return 1;
+}
+
+static inline void free_part_stats(struct hd_struct *part)
+{
+}
+
+#endif /* CONFIG_SMP */
+
+#define part_stat_add(cpu, part, field, addnd)	do {			\
+	__part_stat_add((cpu), (part), field, addnd);			\
+	if ((part)->partno)						\
+		__part_stat_add((cpu), &part_to_disk((part))->part0,	\
+				field, addnd);				\
+} while (0)
+
+#define part_stat_dec(cpu, gendiskp, field)				\
+	part_stat_add(cpu, gendiskp, field, -1)
+#define part_stat_inc(cpu, gendiskp, field)				\
+	part_stat_add(cpu, gendiskp, field, 1)
+#define part_stat_sub(cpu, gendiskp, field, subnd)			\
+	part_stat_add(cpu, gendiskp, field, -subnd)
+
+static inline void part_inc_in_flight(struct hd_struct *part, int rw)
+{
+	atomic_inc(&part->in_flight[rw]);
+	if (part->partno)
+		atomic_inc(&part_to_disk(part)->part0.in_flight[rw]);
+}
+
+static inline void part_dec_in_flight(struct hd_struct *part, int rw)
+{
+	atomic_dec(&part->in_flight[rw]);
+	if (part->partno)
+		atomic_dec(&part_to_disk(part)->part0.in_flight[rw]);
+}
+
+static inline int part_in_flight(struct hd_struct *part)
+{
+	return atomic_read(&part->in_flight[0]) + atomic_read(&part->in_flight[1]);
+}
+
+static inline struct partition_meta_info *alloc_part_info(struct gendisk *disk)
+{
+	if (disk)
+		return kzalloc_node(sizeof(struct partition_meta_info),
+				    GFP_KERNEL, disk->node_id);
+	return kzalloc(sizeof(struct partition_meta_info), GFP_KERNEL);
+}
+
+static inline void free_part_info(struct hd_struct *part)
+{
+	kfree(part->info);
+}
+
+/* block/blk-core.c */
+extern void part_round_stats(int cpu, struct hd_struct *part);
+
+/* block/genhd.c */
+extern void add_disk(struct gendisk *disk);
+extern void del_gendisk(struct gendisk *gp);
+extern struct gendisk *get_gendisk(dev_t dev, int *partno);
+extern struct block_device *bdget_disk(struct gendisk *disk, int partno);
+
+extern void set_device_ro(struct block_device *bdev, int flag);
+extern void set_disk_ro(struct gendisk *disk, int flag);
+
+static inline int get_disk_ro(struct gendisk *disk)
+{
+	return disk->part0.policy;
+}
+
+extern void disk_block_events(struct gendisk *disk);
+extern void disk_unblock_events(struct gendisk *disk);
+extern void disk_flush_events(struct gendisk *disk, unsigned int mask);
+extern unsigned int disk_clear_events(struct gendisk *disk, unsigned int mask);
+
+/* drivers/char/random.c */
+extern void add_disk_randomness(struct gendisk *disk);
+extern void rand_initialize_disk(struct gendisk *disk);
+
+static inline sector_t get_start_sect(struct block_device *bdev)
+{
+	return bdev->bd_part->start_sect;
+}
+static inline sector_t get_capacity(struct gendisk *disk)
+{
+	return disk->part0.nr_sects;
+}
+static inline void set_capacity(struct gendisk *disk, sector_t size)
+{
+	disk->part0.nr_sects = size;
+}
+
+#ifdef CONFIG_SOLARIS_X86_PARTITION
+
+#define SOLARIS_X86_NUMSLICE	16
+#define SOLARIS_X86_VTOC_SANE	(0x600DDEEEUL)
+
+struct solaris_x86_slice {
+	__le16 s_tag;		/* ID tag of partition */
+	__le16 s_flag;		/* permission flags */
+	__le32 s_start;		/* start sector no of partition */
+	__le32 s_size;		/* # of blocks in partition */
+};
+
+struct solaris_x86_vtoc {
+	unsigned int v_bootinfo[3];	/* info needed by mboot (unsupported) */
+	__le32 v_sanity;		/* to verify vtoc sanity */
+	__le32 v_version;		/* layout version */
+	char	v_volume[8];		/* volume name */
+	__le16	v_sectorsz;		/* sector size in bytes */
+	__le16	v_nparts;		/* number of partitions */
+	unsigned int v_reserved[10];	/* free space */
+	struct solaris_x86_slice
+		v_slice[SOLARIS_X86_NUMSLICE]; /* slice headers */
+	unsigned int timestamp[SOLARIS_X86_NUMSLICE]; /* timestamp (unsupported) */
+	char	v_asciilabel[128];	/* for compatibility */
+};
+
+#endif /* CONFIG_SOLARIS_X86_PARTITION */
+
+#ifdef CONFIG_BSD_DISKLABEL
+/*
+ * BSD disklabel support by Yossi Gottlieb <yogo@math.tau.ac.il>
+ * updated by Marc Espie <Marc.Espie@openbsd.org>
+ */
+
+/* check against BSD src/sys/sys/disklabel.h for consistency */
+
+#define BSD_DISKMAGIC	(0x82564557UL)	/* The disk magic number */
+#define BSD_MAXPARTITIONS	16
+#define OPENBSD_MAXPARTITIONS	16
+#define BSD_FS_UNUSED		0	/* disklabel unused partition entry ID */
+struct bsd_disklabel {
+	__le32	d_magic;		/* the magic number */
+	__s16	d_type;			/* drive type */
+	__s16	d_subtype;		/* controller/d_type specific */
+	char	d_typename[16];		/* type name, e.g. "eagle" */
+	char	d_packname[16];			/* pack identifier */ 
+	__u32	d_secsize;		/* # of bytes per sector */
+	__u32	d_nsectors;		/* # of data sectors per track */
+	__u32	d_ntracks;		/* # of tracks per cylinder */
+	__u32	d_ncylinders;		/* # of data cylinders per unit */
+	__u32	d_secpercyl;		/* # of data sectors per cylinder */
+	__u32	d_secperunit;		/* # of data sectors per unit */
+	__u16	d_sparespertrack;	/* # of spare sectors per track */
+	__u16	d_sparespercyl;		/* # of spare sectors per cylinder */
+	__u32	d_acylinders;		/* # of alt. cylinders per unit */
+	__u16	d_rpm;			/* rotational speed */
+	__u16	d_interleave;		/* hardware sector interleave */
+	__u16	d_trackskew;		/* sector 0 skew, per track */
+	__u16	d_cylskew;		/* sector 0 skew, per cylinder */
+	__u32	d_headswitch;		/* head switch time, usec */
+	__u32	d_trkseek;		/* track-to-track seek, usec */
+	__u32	d_flags;		/* generic flags */
+#define NDDATA 5
+	__u32	d_drivedata[NDDATA];	/* drive-type specific information */
+#define NSPARE 5
+	__u32	d_spare[NSPARE];	/* reserved for future use */
+	__le32	d_magic2;		/* the magic number (again) */
+	__le16	d_checksum;		/* xor of data incl. partitions */
+
+			/* filesystem and partition information: */
+	__le16	d_npartitions;		/* number of partitions in following */
+	__le32	d_bbsize;		/* size of boot area at sn0, bytes */
+	__le32	d_sbsize;		/* max size of fs superblock, bytes */
+	struct	bsd_partition {		/* the partition table */
+		__le32	p_size;		/* number of sectors in partition */
+		__le32	p_offset;	/* starting sector */
+		__le32	p_fsize;	/* filesystem basic fragment size */
+		__u8	p_fstype;	/* filesystem type, see below */
+		__u8	p_frag;		/* filesystem fragments per block */
+		__le16	p_cpg;		/* filesystem cylinders per group */
+	} d_partitions[BSD_MAXPARTITIONS];	/* actually may be more */
+};
+
+#endif	/* CONFIG_BSD_DISKLABEL */
+
+#ifdef CONFIG_UNIXWARE_DISKLABEL
+/*
+ * Unixware slices support by Andrzej Krzysztofowicz <ankry@mif.pg.gda.pl>
+ * and Krzysztof G. Baranowski <kgb@knm.org.pl>
+ */
+
+#define UNIXWARE_DISKMAGIC     (0xCA5E600DUL)	/* The disk magic number */
+#define UNIXWARE_DISKMAGIC2    (0x600DDEEEUL)	/* The slice table magic nr */
+#define UNIXWARE_NUMSLICE      16
+#define UNIXWARE_FS_UNUSED     0		/* Unused slice entry ID */
+
+struct unixware_slice {
+	__le16   s_label;	/* label */
+	__le16   s_flags;	/* permission flags */
+	__le32   start_sect;	/* starting sector */
+	__le32   nr_sects;	/* number of sectors in slice */
+};
+
+struct unixware_disklabel {
+	__le32   d_type;               	/* drive type */
+	__le32   d_magic;                /* the magic number */
+	__le32   d_version;              /* version number */
+	char    d_serial[12];           /* serial number of the device */
+	__le32   d_ncylinders;           /* # of data cylinders per device */
+	__le32   d_ntracks;              /* # of tracks per cylinder */
+	__le32   d_nsectors;             /* # of data sectors per track */
+	__le32   d_secsize;              /* # of bytes per sector */
+	__le32   d_part_start;           /* # of first sector of this partition */
+	__le32   d_unknown1[12];         /* ? */
+ 	__le32	d_alt_tbl;              /* byte offset of alternate table */
+ 	__le32	d_alt_len;              /* byte length of alternate table */
+ 	__le32	d_phys_cyl;             /* # of physical cylinders per device */
+ 	__le32	d_phys_trk;             /* # of physical tracks per cylinder */
+ 	__le32	d_phys_sec;             /* # of physical sectors per track */
+ 	__le32	d_phys_bytes;           /* # of physical bytes per sector */
+ 	__le32	d_unknown2;             /* ? */
+	__le32   d_unknown3;             /* ? */
+	__le32	d_pad[8];               /* pad */
+
+	struct unixware_vtoc {
+		__le32	v_magic;		/* the magic number */
+		__le32	v_version;		/* version number */
+		char	v_name[8];		/* volume name */
+		__le16	v_nslices;		/* # of slices */
+		__le16	v_unknown1;		/* ? */
+		__le32	v_reserved[10];		/* reserved */
+		struct unixware_slice
+			v_slice[UNIXWARE_NUMSLICE];	/* slice headers */
+	} vtoc;
+
+};  /* 408 */
+
+#endif /* CONFIG_UNIXWARE_DISKLABEL */
+
+#ifdef CONFIG_MINIX_SUBPARTITION
+#   define MINIX_NR_SUBPARTITIONS  4
+#endif /* CONFIG_MINIX_SUBPARTITION */
+
+#define ADDPART_FLAG_NONE	0
+#define ADDPART_FLAG_RAID	1
+#define ADDPART_FLAG_WHOLEDISK	2
+
+extern int blk_alloc_devt(struct hd_struct *part, dev_t *devt);
+extern void blk_free_devt(dev_t devt);
+extern dev_t blk_lookup_devt(const char *name, int partno);
+extern char *disk_name (struct gendisk *hd, int partno, char *buf);
+
+extern int disk_expand_part_tbl(struct gendisk *disk, int target);
+extern int rescan_partitions(struct gendisk *disk, struct block_device *bdev);
+extern int invalidate_partitions(struct gendisk *disk, struct block_device *bdev);
+extern struct hd_struct * __must_check add_partition(struct gendisk *disk,
+						     int partno, sector_t start,
+						     sector_t len, int flags,
+						     struct partition_meta_info
+						       *info);
+extern void __delete_partition(struct hd_struct *);
+extern void delete_partition(struct gendisk *, int);
+extern void printk_all_partitions(void);
+
+extern struct gendisk *alloc_disk_node(int minors, int node_id);
+extern struct gendisk *alloc_disk(int minors);
+extern struct kobject *get_disk(struct gendisk *disk);
+extern void put_disk(struct gendisk *disk);
+extern void blk_register_region(dev_t devt, unsigned long range,
+			struct module *module,
+			struct kobject *(*probe)(dev_t, int *, void *),
+			int (*lock)(dev_t, void *),
+			void *data);
+extern void blk_unregister_region(dev_t devt, unsigned long range);
+
+extern ssize_t part_size_show(struct device *dev,
+			      struct device_attribute *attr, char *buf);
+extern ssize_t part_stat_show(struct device *dev,
+			      struct device_attribute *attr, char *buf);
+extern ssize_t part_inflight_show(struct device *dev,
+			      struct device_attribute *attr, char *buf);
+#ifdef CONFIG_FAIL_MAKE_REQUEST
+extern ssize_t part_fail_show(struct device *dev,
+			      struct device_attribute *attr, char *buf);
+extern ssize_t part_fail_store(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t count);
+#endif /* CONFIG_FAIL_MAKE_REQUEST */
+
+static inline void hd_ref_init(struct hd_struct *part)
+{
+	atomic_set(&part->ref, 1);
+	smp_mb();
+}
+
+static inline void hd_struct_get(struct hd_struct *part)
+{
+	atomic_inc(&part->ref);
+	smp_mb__after_atomic_inc();
+}
+
+static inline int hd_struct_try_get(struct hd_struct *part)
+{
+	return atomic_inc_not_zero(&part->ref);
+}
+
+static inline void hd_struct_put(struct hd_struct *part)
+{
+	if (atomic_dec_and_test(&part->ref))
+		__delete_partition(part);
+}
+
+#else /* CONFIG_BLOCK */
+
+static inline void printk_all_partitions(void) { }
+
+static inline dev_t blk_lookup_devt(const char *name, int partno)
+{
+	dev_t devt = MKDEV(0, 0);
+	return devt;
+}
+
+#endif /* CONFIG_BLOCK */
+
+#endif /* _LINUX_GENHD_H */
diff --git a/include/linux/getcpu.h b/include/linux/getcpu.h
new file mode 100644
index 00000000..c7372d7a
--- /dev/null
+++ b/include/linux/getcpu.h
@@ -0,0 +1,18 @@
+#ifndef _LINUX_GETCPU_H
+#define _LINUX_GETCPU_H 1
+
+/* Cache for getcpu() to speed it up. Results might be a short time
+   out of date, but will be faster.
+
+   User programs should not refer to the contents of this structure.
+   I repeat they should not refer to it. If they do they will break
+   in future kernels.
+
+   It is only a private cache for vgetcpu(). It will change in future kernels.
+   The user program must store this information per thread (__thread)
+   If you want 100% accurate information pass NULL instead. */
+struct getcpu_cache {
+	unsigned long blob[128 / sizeof(long)];
+};
+
+#endif
diff --git a/include/linux/gfp.h b/include/linux/gfp.h
new file mode 100644
index 00000000..581e74b7
--- /dev/null
+++ b/include/linux/gfp.h
@@ -0,0 +1,394 @@
+#ifndef __LINUX_GFP_H
+#define __LINUX_GFP_H
+
+#include <linux/mmzone.h>
+#include <linux/stddef.h>
+#include <linux/linkage.h>
+#include <linux/topology.h>
+#include <linux/mmdebug.h>
+
+struct vm_area_struct;
+
+/* Plain integer GFP bitmasks. Do not use this directly. */
+#define ___GFP_DMA		0x01u
+#define ___GFP_HIGHMEM		0x02u
+#define ___GFP_DMA32		0x04u
+#define ___GFP_MOVABLE		0x08u
+#define ___GFP_WAIT		0x10u
+#define ___GFP_HIGH		0x20u
+#define ___GFP_IO		0x40u
+#define ___GFP_FS		0x80u
+#define ___GFP_COLD		0x100u
+#define ___GFP_NOWARN		0x200u
+#define ___GFP_REPEAT		0x400u
+#define ___GFP_NOFAIL		0x800u
+#define ___GFP_NORETRY		0x1000u
+#define ___GFP_COMP		0x4000u
+#define ___GFP_ZERO		0x8000u
+#define ___GFP_NOMEMALLOC	0x10000u
+#define ___GFP_HARDWALL		0x20000u
+#define ___GFP_THISNODE		0x40000u
+#define ___GFP_RECLAIMABLE	0x80000u
+#ifdef CONFIG_KMEMCHECK
+#define ___GFP_NOTRACK		0x200000u
+#else
+#define ___GFP_NOTRACK		0
+#endif
+#define ___GFP_NO_KSWAPD	0x400000u
+#define ___GFP_OTHER_NODE	0x800000u
+#define ___GFP_WRITE		0x1000000u
+
+/*
+ * GFP bitmasks..
+ *
+ * Zone modifiers (see linux/mmzone.h - low three bits)
+ *
+ * Do not put any conditional on these. If necessary modify the definitions
+ * without the underscores and use them consistently. The definitions here may
+ * be used in bit comparisons.
+ */
+#define __GFP_DMA	((__force gfp_t)___GFP_DMA)
+#define __GFP_HIGHMEM	((__force gfp_t)___GFP_HIGHMEM)
+#define __GFP_DMA32	((__force gfp_t)___GFP_DMA32)
+#define __GFP_MOVABLE	((__force gfp_t)___GFP_MOVABLE)  /* Page is movable */
+#define GFP_ZONEMASK	(__GFP_DMA|__GFP_HIGHMEM|__GFP_DMA32|__GFP_MOVABLE)
+/*
+ * Action modifiers - doesn't change the zoning
+ *
+ * __GFP_REPEAT: Try hard to allocate the memory, but the allocation attempt
+ * _might_ fail.  This depends upon the particular VM implementation.
+ *
+ * __GFP_NOFAIL: The VM implementation _must_ retry infinitely: the caller
+ * cannot handle allocation failures.  This modifier is deprecated and no new
+ * users should be added.
+ *
+ * __GFP_NORETRY: The VM implementation must not retry indefinitely.
+ *
+ * __GFP_MOVABLE: Flag that this page will be movable by the page migration
+ * mechanism or reclaimed
+ */
+#define __GFP_WAIT	((__force gfp_t)___GFP_WAIT)	/* Can wait and reschedule? */
+#define __GFP_HIGH	((__force gfp_t)___GFP_HIGH)	/* Should access emergency pools? */
+#define __GFP_IO	((__force gfp_t)___GFP_IO)	/* Can start physical IO? */
+#define __GFP_FS	((__force gfp_t)___GFP_FS)	/* Can call down to low-level FS? */
+#define __GFP_COLD	((__force gfp_t)___GFP_COLD)	/* Cache-cold page required */
+#define __GFP_NOWARN	((__force gfp_t)___GFP_NOWARN)	/* Suppress page allocation failure warning */
+#define __GFP_REPEAT	((__force gfp_t)___GFP_REPEAT)	/* See above */
+#define __GFP_NOFAIL	((__force gfp_t)___GFP_NOFAIL)	/* See above */
+#define __GFP_NORETRY	((__force gfp_t)___GFP_NORETRY) /* See above */
+#define __GFP_COMP	((__force gfp_t)___GFP_COMP)	/* Add compound page metadata */
+#define __GFP_ZERO	((__force gfp_t)___GFP_ZERO)	/* Return zeroed page on success */
+#define __GFP_NOMEMALLOC ((__force gfp_t)___GFP_NOMEMALLOC) /* Don't use emergency reserves */
+#define __GFP_HARDWALL   ((__force gfp_t)___GFP_HARDWALL) /* Enforce hardwall cpuset memory allocs */
+#define __GFP_THISNODE	((__force gfp_t)___GFP_THISNODE)/* No fallback, no policies */
+#define __GFP_RECLAIMABLE ((__force gfp_t)___GFP_RECLAIMABLE) /* Page is reclaimable */
+#define __GFP_NOTRACK	((__force gfp_t)___GFP_NOTRACK)  /* Don't track with kmemcheck */
+
+#define __GFP_NO_KSWAPD	((__force gfp_t)___GFP_NO_KSWAPD)
+#define __GFP_OTHER_NODE ((__force gfp_t)___GFP_OTHER_NODE) /* On behalf of other node */
+#define __GFP_WRITE	((__force gfp_t)___GFP_WRITE)	/* Allocator intends to dirty page */
+
+/*
+ * This may seem redundant, but it's a way of annotating false positives vs.
+ * allocations that simply cannot be supported (e.g. page tables).
+ */
+#define __GFP_NOTRACK_FALSE_POSITIVE (__GFP_NOTRACK)
+
+#define __GFP_BITS_SHIFT 25	/* Room for N __GFP_FOO bits */
+#define __GFP_BITS_MASK ((__force gfp_t)((1 << __GFP_BITS_SHIFT) - 1))
+
+/* This equals 0, but use constants in case they ever change */
+#define GFP_NOWAIT	(GFP_ATOMIC & ~__GFP_HIGH)
+/* GFP_ATOMIC means both !wait (__GFP_WAIT not set) and use emergency pool */
+#define GFP_ATOMIC	(__GFP_HIGH)
+#define GFP_NOIO	(__GFP_WAIT)
+#define GFP_NOFS	(__GFP_WAIT | __GFP_IO)
+#define GFP_KERNEL	(__GFP_WAIT | __GFP_IO | __GFP_FS)
+#define GFP_TEMPORARY	(__GFP_WAIT | __GFP_IO | __GFP_FS | \
+			 __GFP_RECLAIMABLE)
+#define GFP_USER	(__GFP_WAIT | __GFP_IO | __GFP_FS | __GFP_HARDWALL)
+#define GFP_HIGHUSER	(__GFP_WAIT | __GFP_IO | __GFP_FS | __GFP_HARDWALL | \
+			 __GFP_HIGHMEM)
+#define GFP_HIGHUSER_MOVABLE	(__GFP_WAIT | __GFP_IO | __GFP_FS | \
+				 __GFP_HARDWALL | __GFP_HIGHMEM | \
+				 __GFP_MOVABLE)
+#define GFP_IOFS	(__GFP_IO | __GFP_FS)
+#define GFP_TRANSHUGE	(GFP_HIGHUSER_MOVABLE | __GFP_COMP | \
+			 __GFP_NOMEMALLOC | __GFP_NORETRY | __GFP_NOWARN | \
+			 __GFP_NO_KSWAPD)
+
+#ifdef CONFIG_NUMA
+#define GFP_THISNODE	(__GFP_THISNODE | __GFP_NOWARN | __GFP_NORETRY)
+#else
+#define GFP_THISNODE	((__force gfp_t)0)
+#endif
+
+/* This mask makes up all the page movable related flags */
+#define GFP_MOVABLE_MASK (__GFP_RECLAIMABLE|__GFP_MOVABLE)
+
+/* Control page allocator reclaim behavior */
+#define GFP_RECLAIM_MASK (__GFP_WAIT|__GFP_HIGH|__GFP_IO|__GFP_FS|\
+			__GFP_NOWARN|__GFP_REPEAT|__GFP_NOFAIL|\
+			__GFP_NORETRY|__GFP_NOMEMALLOC)
+
+/* Control slab gfp mask during early boot */
+#define GFP_BOOT_MASK (__GFP_BITS_MASK & ~(__GFP_WAIT|__GFP_IO|__GFP_FS))
+
+/* Control allocation constraints */
+#define GFP_CONSTRAINT_MASK (__GFP_HARDWALL|__GFP_THISNODE)
+
+/* Do not use these with a slab allocator */
+#define GFP_SLAB_BUG_MASK (__GFP_DMA32|__GFP_HIGHMEM|~__GFP_BITS_MASK)
+
+/* Flag - indicates that the buffer will be suitable for DMA.  Ignored on some
+   platforms, used as appropriate on others */
+
+#define GFP_DMA		__GFP_DMA
+
+/* 4GB DMA on some platforms */
+#define GFP_DMA32	__GFP_DMA32
+
+/* Convert GFP flags to their corresponding migrate type */
+static inline int allocflags_to_migratetype(gfp_t gfp_flags)
+{
+	WARN_ON((gfp_flags & GFP_MOVABLE_MASK) == GFP_MOVABLE_MASK);
+
+	if (unlikely(page_group_by_mobility_disabled))
+		return MIGRATE_UNMOVABLE;
+
+	/* Group based on mobility */
+	return (((gfp_flags & __GFP_MOVABLE) != 0) << 1) |
+		((gfp_flags & __GFP_RECLAIMABLE) != 0);
+}
+
+#ifdef CONFIG_HIGHMEM
+#define OPT_ZONE_HIGHMEM ZONE_HIGHMEM
+#else
+#define OPT_ZONE_HIGHMEM ZONE_NORMAL
+#endif
+
+#ifdef CONFIG_ZONE_DMA
+#define OPT_ZONE_DMA ZONE_DMA
+#else
+#define OPT_ZONE_DMA ZONE_NORMAL
+#endif
+
+#ifdef CONFIG_ZONE_DMA32
+#define OPT_ZONE_DMA32 ZONE_DMA32
+#else
+#define OPT_ZONE_DMA32 ZONE_NORMAL
+#endif
+
+/*
+ * GFP_ZONE_TABLE is a word size bitstring that is used for looking up the
+ * zone to use given the lowest 4 bits of gfp_t. Entries are ZONE_SHIFT long
+ * and there are 16 of them to cover all possible combinations of
+ * __GFP_DMA, __GFP_DMA32, __GFP_MOVABLE and __GFP_HIGHMEM.
+ *
+ * The zone fallback order is MOVABLE=>HIGHMEM=>NORMAL=>DMA32=>DMA.
+ * But GFP_MOVABLE is not only a zone specifier but also an allocation
+ * policy. Therefore __GFP_MOVABLE plus another zone selector is valid.
+ * Only 1 bit of the lowest 3 bits (DMA,DMA32,HIGHMEM) can be set to "1".
+ *
+ *       bit       result
+ *       =================
+ *       0x0    => NORMAL
+ *       0x1    => DMA or NORMAL
+ *       0x2    => HIGHMEM or NORMAL
+ *       0x3    => BAD (DMA+HIGHMEM)
+ *       0x4    => DMA32 or DMA or NORMAL
+ *       0x5    => BAD (DMA+DMA32)
+ *       0x6    => BAD (HIGHMEM+DMA32)
+ *       0x7    => BAD (HIGHMEM+DMA32+DMA)
+ *       0x8    => NORMAL (MOVABLE+0)
+ *       0x9    => DMA or NORMAL (MOVABLE+DMA)
+ *       0xa    => MOVABLE (Movable is valid only if HIGHMEM is set too)
+ *       0xb    => BAD (MOVABLE+HIGHMEM+DMA)
+ *       0xc    => DMA32 (MOVABLE+HIGHMEM+DMA32)
+ *       0xd    => BAD (MOVABLE+DMA32+DMA)
+ *       0xe    => BAD (MOVABLE+DMA32+HIGHMEM)
+ *       0xf    => BAD (MOVABLE+DMA32+HIGHMEM+DMA)
+ *
+ * ZONES_SHIFT must be <= 2 on 32 bit platforms.
+ */
+
+#if 16 * ZONES_SHIFT > BITS_PER_LONG
+#error ZONES_SHIFT too large to create GFP_ZONE_TABLE integer
+#endif
+
+#define GFP_ZONE_TABLE ( \
+	(ZONE_NORMAL << 0 * ZONES_SHIFT)				      \
+	| (OPT_ZONE_DMA << ___GFP_DMA * ZONES_SHIFT)			      \
+	| (OPT_ZONE_HIGHMEM << ___GFP_HIGHMEM * ZONES_SHIFT)		      \
+	| (OPT_ZONE_DMA32 << ___GFP_DMA32 * ZONES_SHIFT)		      \
+	| (ZONE_NORMAL << ___GFP_MOVABLE * ZONES_SHIFT)			      \
+	| (OPT_ZONE_DMA << (___GFP_MOVABLE | ___GFP_DMA) * ZONES_SHIFT)	      \
+	| (ZONE_MOVABLE << (___GFP_MOVABLE | ___GFP_HIGHMEM) * ZONES_SHIFT)   \
+	| (OPT_ZONE_DMA32 << (___GFP_MOVABLE | ___GFP_DMA32) * ZONES_SHIFT)   \
+)
+
+/*
+ * GFP_ZONE_BAD is a bitmap for all combinations of __GFP_DMA, __GFP_DMA32
+ * __GFP_HIGHMEM and __GFP_MOVABLE that are not permitted. One flag per
+ * entry starting with bit 0. Bit is set if the combination is not
+ * allowed.
+ */
+#define GFP_ZONE_BAD ( \
+	1 << (___GFP_DMA | ___GFP_HIGHMEM)				      \
+	| 1 << (___GFP_DMA | ___GFP_DMA32)				      \
+	| 1 << (___GFP_DMA32 | ___GFP_HIGHMEM)				      \
+	| 1 << (___GFP_DMA | ___GFP_DMA32 | ___GFP_HIGHMEM)		      \
+	| 1 << (___GFP_MOVABLE | ___GFP_HIGHMEM | ___GFP_DMA)		      \
+	| 1 << (___GFP_MOVABLE | ___GFP_DMA32 | ___GFP_DMA)		      \
+	| 1 << (___GFP_MOVABLE | ___GFP_DMA32 | ___GFP_HIGHMEM)		      \
+	| 1 << (___GFP_MOVABLE | ___GFP_DMA32 | ___GFP_DMA | ___GFP_HIGHMEM)  \
+)
+
+static inline enum zone_type gfp_zone(gfp_t flags)
+{
+	enum zone_type z;
+	int bit = (__force int) (flags & GFP_ZONEMASK);
+
+	z = (GFP_ZONE_TABLE >> (bit * ZONES_SHIFT)) &
+					 ((1 << ZONES_SHIFT) - 1);
+	VM_BUG_ON((GFP_ZONE_BAD >> bit) & 1);
+	return z;
+}
+
+/*
+ * There is only one page-allocator function, and two main namespaces to
+ * it. The alloc_page*() variants return 'struct page *' and as such
+ * can allocate highmem pages, the *get*page*() variants return
+ * virtual kernel addresses to the allocated page(s).
+ */
+
+static inline int gfp_zonelist(gfp_t flags)
+{
+	if (NUMA_BUILD && unlikely(flags & __GFP_THISNODE))
+		return 1;
+
+	return 0;
+}
+
+/*
+ * We get the zone list from the current node and the gfp_mask.
+ * This zone list contains a maximum of MAXNODES*MAX_NR_ZONES zones.
+ * There are two zonelists per node, one for all zones with memory and
+ * one containing just zones from the node the zonelist belongs to.
+ *
+ * For the normal case of non-DISCONTIGMEM systems the NODE_DATA() gets
+ * optimized to &contig_page_data at compile-time.
+ */
+static inline struct zonelist *node_zonelist(int nid, gfp_t flags)
+{
+	return NODE_DATA(nid)->node_zonelists + gfp_zonelist(flags);
+}
+
+#ifndef HAVE_ARCH_FREE_PAGE
+static inline void arch_free_page(struct page *page, int order) { }
+#endif
+#ifndef HAVE_ARCH_ALLOC_PAGE
+static inline void arch_alloc_page(struct page *page, int order) { }
+#endif
+
+struct page *
+__alloc_pages_nodemask(gfp_t gfp_mask, unsigned int order,
+		       struct zonelist *zonelist, nodemask_t *nodemask);
+
+static inline struct page *
+__alloc_pages(gfp_t gfp_mask, unsigned int order,
+		struct zonelist *zonelist)
+{
+	return __alloc_pages_nodemask(gfp_mask, order, zonelist, NULL);
+}
+
+static inline struct page *alloc_pages_node(int nid, gfp_t gfp_mask,
+						unsigned int order)
+{
+	/* Unknown node is current node */
+	if (nid < 0)
+		nid = numa_node_id();
+
+	return __alloc_pages(gfp_mask, order, node_zonelist(nid, gfp_mask));
+}
+
+static inline struct page *alloc_pages_exact_node(int nid, gfp_t gfp_mask,
+						unsigned int order)
+{
+	VM_BUG_ON(nid < 0 || nid >= MAX_NUMNODES || !node_online(nid));
+
+	return __alloc_pages(gfp_mask, order, node_zonelist(nid, gfp_mask));
+}
+
+#ifdef CONFIG_NUMA
+extern struct page *alloc_pages_current(gfp_t gfp_mask, unsigned order);
+
+static inline struct page *
+alloc_pages(gfp_t gfp_mask, unsigned int order)
+{
+	return alloc_pages_current(gfp_mask, order);
+}
+extern struct page *alloc_pages_vma(gfp_t gfp_mask, int order,
+			struct vm_area_struct *vma, unsigned long addr,
+			int node);
+#else
+#define alloc_pages(gfp_mask, order) \
+		alloc_pages_node(numa_node_id(), gfp_mask, order)
+#define alloc_pages_vma(gfp_mask, order, vma, addr, node)	\
+	alloc_pages(gfp_mask, order)
+#endif
+#define alloc_page(gfp_mask) alloc_pages(gfp_mask, 0)
+#define alloc_page_vma(gfp_mask, vma, addr)			\
+	alloc_pages_vma(gfp_mask, 0, vma, addr, numa_node_id())
+#define alloc_page_vma_node(gfp_mask, vma, addr, node)		\
+	alloc_pages_vma(gfp_mask, 0, vma, addr, node)
+
+extern unsigned long __get_free_pages(gfp_t gfp_mask, unsigned int order);
+extern unsigned long get_zeroed_page(gfp_t gfp_mask);
+
+void *alloc_pages_exact(size_t size, gfp_t gfp_mask);
+void free_pages_exact(void *virt, size_t size);
+/* This is different from alloc_pages_exact_node !!! */
+void *alloc_pages_exact_nid(int nid, size_t size, gfp_t gfp_mask);
+
+#define __get_free_page(gfp_mask) \
+		__get_free_pages((gfp_mask), 0)
+
+#define __get_dma_pages(gfp_mask, order) \
+		__get_free_pages((gfp_mask) | GFP_DMA, (order))
+
+extern void __free_pages(struct page *page, unsigned int order);
+extern void free_pages(unsigned long addr, unsigned int order);
+extern void free_hot_cold_page(struct page *page, int cold);
+extern void free_hot_cold_page_list(struct list_head *list, int cold);
+
+#define __free_page(page) __free_pages((page), 0)
+#define free_page(addr) free_pages((addr), 0)
+
+void page_alloc_init(void);
+void drain_zone_pages(struct zone *zone, struct per_cpu_pages *pcp);
+void drain_all_pages(void);
+void drain_local_pages(void *dummy);
+
+/*
+ * gfp_allowed_mask is set to GFP_BOOT_MASK during early boot to restrict what
+ * GFP flags are used before interrupts are enabled. Once interrupts are
+ * enabled, it is set to __GFP_BITS_MASK while the system is running. During
+ * hibernation, it is used by PM to avoid I/O during memory allocation while
+ * devices are suspended.
+ */
+extern gfp_t gfp_allowed_mask;
+
+extern void pm_restrict_gfp_mask(void);
+extern void pm_restore_gfp_mask(void);
+
+#ifdef CONFIG_PM_SLEEP
+extern bool pm_suspended_storage(void);
+#else
+static inline bool pm_suspended_storage(void)
+{
+	return false;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+#endif /* __LINUX_GFP_H */
diff --git a/include/linux/gfs2_ondisk.h b/include/linux/gfs2_ondisk.h
new file mode 100644
index 00000000..fa98bdb0
--- /dev/null
+++ b/include/linux/gfs2_ondisk.h
@@ -0,0 +1,452 @@
+/*
+ * Copyright (C) Sistina Software, Inc.  1997-2003 All rights reserved.
+ * Copyright (C) 2004-2006 Red Hat, Inc.  All rights reserved.
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License v.2.
+ */
+
+#ifndef __GFS2_ONDISK_DOT_H__
+#define __GFS2_ONDISK_DOT_H__
+
+#include <linux/types.h>
+
+#define GFS2_MAGIC		0x01161970
+#define GFS2_BASIC_BLOCK	512
+#define GFS2_BASIC_BLOCK_SHIFT	9
+
+/* Lock numbers of the LM_TYPE_NONDISK type */
+
+#define GFS2_MOUNT_LOCK		0
+#define GFS2_LIVE_LOCK		1
+#define GFS2_TRANS_LOCK		2
+#define GFS2_RENAME_LOCK	3
+#define GFS2_CONTROL_LOCK	4
+#define GFS2_MOUNTED_LOCK	5
+
+/* Format numbers for various metadata types */
+
+#define GFS2_FORMAT_NONE	0
+#define GFS2_FORMAT_SB		100
+#define GFS2_FORMAT_RG		200
+#define GFS2_FORMAT_RB		300
+#define GFS2_FORMAT_DI		400
+#define GFS2_FORMAT_IN		500
+#define GFS2_FORMAT_LF		600
+#define GFS2_FORMAT_JD		700
+#define GFS2_FORMAT_LH		800
+#define GFS2_FORMAT_LD		900
+#define GFS2_FORMAT_LB		1000
+#define GFS2_FORMAT_EA		1600
+#define GFS2_FORMAT_ED		1700
+#define GFS2_FORMAT_QC		1400
+/* These are format numbers for entities contained in files */
+#define GFS2_FORMAT_RI		1100
+#define GFS2_FORMAT_DE		1200
+#define GFS2_FORMAT_QU		1500
+/* These are part of the superblock */
+#define GFS2_FORMAT_FS		1801
+#define GFS2_FORMAT_MULTI	1900
+
+/*
+ * An on-disk inode number
+ */
+
+struct gfs2_inum {
+	__be64 no_formal_ino;
+	__be64 no_addr;
+};
+
+/*
+ * Generic metadata head structure
+ * Every inplace buffer logged in the journal must start with this.
+ */
+
+#define GFS2_METATYPE_NONE	0
+#define GFS2_METATYPE_SB	1
+#define GFS2_METATYPE_RG	2
+#define GFS2_METATYPE_RB	3
+#define GFS2_METATYPE_DI	4
+#define GFS2_METATYPE_IN	5
+#define GFS2_METATYPE_LF	6
+#define GFS2_METATYPE_JD	7
+#define GFS2_METATYPE_LH	8
+#define GFS2_METATYPE_LD	9
+#define GFS2_METATYPE_LB	12
+#define GFS2_METATYPE_EA	10
+#define GFS2_METATYPE_ED	11
+#define GFS2_METATYPE_QC	14
+
+struct gfs2_meta_header {
+	__be32 mh_magic;
+	__be32 mh_type;
+	__be64 __pad0;		/* Was generation number in gfs1 */
+	__be32 mh_format;
+	/* This union is to keep userspace happy */
+	union {
+		__be32 mh_jid;		/* Was incarnation number in gfs1 */
+		__be32 __pad1;
+	};
+};
+
+/*
+ * super-block structure
+ *
+ * It's probably good if SIZEOF_SB <= GFS2_BASIC_BLOCK (512 bytes)
+ *
+ * Order is important, need to be able to read old superblocks to do on-disk
+ * version upgrades.
+ */
+
+/* Address of superblock in GFS2 basic blocks */
+#define GFS2_SB_ADDR		128
+
+/* The lock number for the superblock (must be zero) */
+#define GFS2_SB_LOCK		0
+
+/* Requirement:  GFS2_LOCKNAME_LEN % 8 == 0
+   Includes: the fencing zero at the end */
+#define GFS2_LOCKNAME_LEN	64
+
+struct gfs2_sb {
+	struct gfs2_meta_header sb_header;
+
+	__be32 sb_fs_format;
+	__be32 sb_multihost_format;
+	__u32  __pad0;	/* Was superblock flags in gfs1 */
+
+	__be32 sb_bsize;
+	__be32 sb_bsize_shift;
+	__u32 __pad1;	/* Was journal segment size in gfs1 */
+
+	struct gfs2_inum sb_master_dir; /* Was jindex dinode in gfs1 */
+	struct gfs2_inum __pad2; /* Was rindex dinode in gfs1 */
+	struct gfs2_inum sb_root_dir;
+
+	char sb_lockproto[GFS2_LOCKNAME_LEN];
+	char sb_locktable[GFS2_LOCKNAME_LEN];
+
+	struct gfs2_inum __pad3; /* Was quota inode in gfs1 */
+	struct gfs2_inum __pad4; /* Was licence inode in gfs1 */
+#define GFS2_HAS_UUID 1
+	__u8 sb_uuid[16]; /* The UUID, maybe 0 for backwards compat */
+};
+
+/*
+ * resource index structure
+ */
+
+struct gfs2_rindex {
+	__be64 ri_addr;	/* grp block disk address */
+	__be32 ri_length;	/* length of rgrp header in fs blocks */
+	__u32 __pad;
+
+	__be64 ri_data0;	/* first data location */
+	__be32 ri_data;	/* num of data blocks in rgrp */
+
+	__be32 ri_bitbytes;	/* number of bytes in data bitmaps */
+
+	__u8 ri_reserved[64];
+};
+
+/*
+ * resource group header structure
+ */
+
+/* Number of blocks per byte in rgrp */
+#define GFS2_NBBY		4
+#define GFS2_BIT_SIZE		2
+#define GFS2_BIT_MASK		0x00000003
+
+#define GFS2_BLKST_FREE		0
+#define GFS2_BLKST_USED		1
+#define GFS2_BLKST_UNLINKED	2
+#define GFS2_BLKST_DINODE	3
+
+#define GFS2_RGF_JOURNAL	0x00000001
+#define GFS2_RGF_METAONLY	0x00000002
+#define GFS2_RGF_DATAONLY	0x00000004
+#define GFS2_RGF_NOALLOC	0x00000008
+#define GFS2_RGF_TRIMMED	0x00000010
+
+struct gfs2_rgrp {
+	struct gfs2_meta_header rg_header;
+
+	__be32 rg_flags;
+	__be32 rg_free;
+	__be32 rg_dinodes;
+	__be32 __pad;
+	__be64 rg_igeneration;
+
+	__u8 rg_reserved[80]; /* Several fields from gfs1 now reserved */
+};
+
+/*
+ * quota structure
+ */
+
+struct gfs2_quota {
+	__be64 qu_limit;
+	__be64 qu_warn;
+	__be64 qu_value;
+	__u8 qu_reserved[64];
+};
+
+/*
+ * dinode structure
+ */
+
+#define GFS2_MAX_META_HEIGHT	10
+#define GFS2_DIR_MAX_DEPTH	17
+
+#define DT2IF(dt) (((dt) << 12) & S_IFMT)
+#define IF2DT(sif) (((sif) & S_IFMT) >> 12)
+
+enum {
+	gfs2fl_Jdata		= 0,
+	gfs2fl_ExHash		= 1,
+	gfs2fl_Unused		= 2,
+	gfs2fl_EaIndirect	= 3,
+	gfs2fl_Directio		= 4,
+	gfs2fl_Immutable	= 5,
+	gfs2fl_AppendOnly	= 6,
+	gfs2fl_NoAtime		= 7,
+	gfs2fl_Sync		= 8,
+	gfs2fl_System		= 9,
+	gfs2fl_TruncInProg	= 29,
+	gfs2fl_InheritDirectio	= 30,
+	gfs2fl_InheritJdata	= 31,
+};
+
+/* Dinode flags */
+#define GFS2_DIF_JDATA			0x00000001
+#define GFS2_DIF_EXHASH			0x00000002
+#define GFS2_DIF_UNUSED			0x00000004  /* only in gfs1 */
+#define GFS2_DIF_EA_INDIRECT		0x00000008
+#define GFS2_DIF_DIRECTIO		0x00000010
+#define GFS2_DIF_IMMUTABLE		0x00000020
+#define GFS2_DIF_APPENDONLY		0x00000040
+#define GFS2_DIF_NOATIME		0x00000080
+#define GFS2_DIF_SYNC			0x00000100
+#define GFS2_DIF_SYSTEM			0x00000200 /* New in gfs2 */
+#define GFS2_DIF_TRUNC_IN_PROG		0x20000000 /* New in gfs2 */
+#define GFS2_DIF_INHERIT_DIRECTIO	0x40000000
+#define GFS2_DIF_INHERIT_JDATA		0x80000000
+
+struct gfs2_dinode {
+	struct gfs2_meta_header di_header;
+
+	struct gfs2_inum di_num;
+
+	__be32 di_mode;	/* mode of file */
+	__be32 di_uid;	/* owner's user id */
+	__be32 di_gid;	/* owner's group id */
+	__be32 di_nlink;	/* number of links to this file */
+	__be64 di_size;	/* number of bytes in file */
+	__be64 di_blocks;	/* number of blocks in file */
+	__be64 di_atime;	/* time last accessed */
+	__be64 di_mtime;	/* time last modified */
+	__be64 di_ctime;	/* time last changed */
+	__be32 di_major;	/* device major number */
+	__be32 di_minor;	/* device minor number */
+
+	/* This section varies from gfs1. Padding added to align with
+         * remainder of dinode
+	 */
+	__be64 di_goal_meta;	/* rgrp to alloc from next */
+	__be64 di_goal_data;	/* data block goal */
+	__be64 di_generation;	/* generation number for NFS */
+
+	__be32 di_flags;	/* GFS2_DIF_... */
+	__be32 di_payload_format;  /* GFS2_FORMAT_... */
+	__u16 __pad1;	/* Was ditype in gfs1 */
+	__be16 di_height;	/* height of metadata */
+	__u32 __pad2;	/* Unused incarnation number from gfs1 */
+
+	/* These only apply to directories  */
+	__u16 __pad3;	/* Padding */
+	__be16 di_depth;	/* Number of bits in the table */
+	__be32 di_entries;	/* The number of entries in the directory */
+
+	struct gfs2_inum __pad4; /* Unused even in current gfs1 */
+
+	__be64 di_eattr;	/* extended attribute block number */
+	__be32 di_atime_nsec;   /* nsec portion of atime */
+	__be32 di_mtime_nsec;   /* nsec portion of mtime */
+	__be32 di_ctime_nsec;   /* nsec portion of ctime */
+
+	__u8 di_reserved[44];
+};
+
+/*
+ * directory structure - many of these per directory file
+ */
+
+#define GFS2_FNAMESIZE		255
+#define GFS2_DIRENT_SIZE(name_len) ((sizeof(struct gfs2_dirent) + (name_len) + 7) & ~7)
+
+struct gfs2_dirent {
+	struct gfs2_inum de_inum;
+	__be32 de_hash;
+	__be16 de_rec_len;
+	__be16 de_name_len;
+	__be16 de_type;
+	__u8 __pad[14];
+};
+
+/*
+ * Header of leaf directory nodes
+ */
+
+struct gfs2_leaf {
+	struct gfs2_meta_header lf_header;
+
+	__be16 lf_depth;		/* Depth of leaf */
+	__be16 lf_entries;		/* Number of dirents in leaf */
+	__be32 lf_dirent_format;	/* Format of the dirents */
+	__be64 lf_next;			/* Next leaf, if overflow */
+
+	__u8 lf_reserved[64];
+};
+
+/*
+ * Extended attribute header format
+ *
+ * This works in a similar way to dirents. There is a fixed size header
+ * followed by a variable length section made up of the name and the
+ * associated data. In the case of a "stuffed" entry, the value is
+ * inline directly after the name, the ea_num_ptrs entry will be
+ * zero in that case. For non-"stuffed" entries, there will be
+ * a set of pointers (aligned to 8 byte boundary) to the block(s)
+ * containing the value.
+ *
+ * The blocks containing the values and the blocks containing the
+ * extended attribute headers themselves all start with the common
+ * metadata header. Each inode, if it has extended attributes, will
+ * have either a single block containing the extended attribute headers
+ * or a single indirect block pointing to blocks containing the
+ * extended attribure headers.
+ *
+ * The maximim size of the data part of an extended attribute is 64k
+ * so the number of blocks required depends upon block size. Since the
+ * block size also determines the number of pointers in an indirect
+ * block, its a fairly complicated calculation to work out the maximum
+ * number of blocks that an inode may have relating to extended attributes.
+ *
+ */
+
+#define GFS2_EA_MAX_NAME_LEN	255
+#define GFS2_EA_MAX_DATA_LEN	65536
+
+#define GFS2_EATYPE_UNUSED	0
+#define GFS2_EATYPE_USR		1
+#define GFS2_EATYPE_SYS		2
+#define GFS2_EATYPE_SECURITY	3
+
+#define GFS2_EATYPE_LAST	3
+#define GFS2_EATYPE_VALID(x)	((x) <= GFS2_EATYPE_LAST)
+
+#define GFS2_EAFLAG_LAST	0x01	/* last ea in block */
+
+struct gfs2_ea_header {
+	__be32 ea_rec_len;
+	__be32 ea_data_len;
+	__u8 ea_name_len;	/* no NULL pointer after the string */
+	__u8 ea_type;		/* GFS2_EATYPE_... */
+	__u8 ea_flags;		/* GFS2_EAFLAG_... */
+	__u8 ea_num_ptrs;
+	__u32 __pad;
+};
+
+/*
+ * Log header structure
+ */
+
+#define GFS2_LOG_HEAD_UNMOUNT	0x00000001	/* log is clean */
+
+struct gfs2_log_header {
+	struct gfs2_meta_header lh_header;
+
+	__be64 lh_sequence;	/* Sequence number of this transaction */
+	__be32 lh_flags;	/* GFS2_LOG_HEAD_... */
+	__be32 lh_tail;		/* Block number of log tail */
+	__be32 lh_blkno;
+	__be32 lh_hash;
+};
+
+/*
+ * Log type descriptor
+ */
+
+#define GFS2_LOG_DESC_METADATA	300
+/* ld_data1 is the number of metadata blocks in the descriptor.
+   ld_data2 is unused. */
+
+#define GFS2_LOG_DESC_REVOKE	301
+/* ld_data1 is the number of revoke blocks in the descriptor.
+   ld_data2 is unused. */
+
+#define GFS2_LOG_DESC_JDATA	302
+/* ld_data1 is the number of data blocks in the descriptor.
+   ld_data2 is unused. */
+
+struct gfs2_log_descriptor {
+	struct gfs2_meta_header ld_header;
+
+	__be32 ld_type;		/* GFS2_LOG_DESC_... */
+	__be32 ld_length;	/* Number of buffers in this chunk */
+	__be32 ld_data1;	/* descriptor-specific field */
+	__be32 ld_data2;	/* descriptor-specific field */
+
+	__u8 ld_reserved[32];
+};
+
+/*
+ * Inum Range
+ * Describe a range of formal inode numbers allocated to
+ * one machine to assign to inodes.
+ */
+
+#define GFS2_INUM_QUANTUM	1048576
+
+struct gfs2_inum_range {
+	__be64 ir_start;
+	__be64 ir_length;
+};
+
+/*
+ * Statfs change
+ * Describes an change to the pool of free and allocated
+ * blocks.
+ */
+
+struct gfs2_statfs_change {
+	__be64 sc_total;
+	__be64 sc_free;
+	__be64 sc_dinodes;
+};
+
+/*
+ * Quota change
+ * Describes an allocation change for a particular
+ * user or group.
+ */
+
+#define GFS2_QCF_USER		0x00000001
+
+struct gfs2_quota_change {
+	__be64 qc_change;
+	__be32 qc_flags;	/* GFS2_QCF_... */
+	__be32 qc_id;
+};
+
+struct gfs2_quota_lvb {
+        __be32 qb_magic;
+        __u32 __pad;
+        __be64 qb_limit;      /* Hard limit of # blocks to alloc */
+        __be64 qb_warn;       /* Warn user when alloc is above this # */
+        __be64 qb_value;       /* Current # blocks allocated */
+};
+
+#endif /* __GFS2_ONDISK_DOT_H__ */
diff --git a/include/linux/gigaset_dev.h b/include/linux/gigaset_dev.h
new file mode 100644
index 00000000..258ba829
--- /dev/null
+++ b/include/linux/gigaset_dev.h
@@ -0,0 +1,38 @@
+/*
+ * interface to user space for the gigaset driver
+ *
+ * Copyright (c) 2004 by Hansjoerg Lipp <hjlipp@web.de>
+ *
+ * =====================================================================
+ *    This program is free software; you can redistribute it and/or
+ *    modify it under the terms of the GNU General Public License as
+ *    published by the Free Software Foundation; either version 2 of
+ *    the License, or (at your option) any later version.
+ * =====================================================================
+ */
+
+#ifndef GIGASET_INTERFACE_H
+#define GIGASET_INTERFACE_H
+
+#include <linux/ioctl.h>
+
+/* The magic IOCTL value for this interface. */
+#define GIGASET_IOCTL 0x47
+
+/* enable/disable device control via character device (lock out ISDN subsys) */
+#define GIGASET_REDIR    _IOWR(GIGASET_IOCTL, 0, int)
+
+/* enable adapter configuration mode (M10x only) */
+#define GIGASET_CONFIG   _IOWR(GIGASET_IOCTL, 1, int)
+
+/* set break characters (M105 only) */
+#define GIGASET_BRKCHARS _IOW(GIGASET_IOCTL, 2, unsigned char[6])
+
+/* get version information selected by arg[0] */
+#define GIGASET_VERSION  _IOWR(GIGASET_IOCTL, 3, unsigned[4])
+/* values for GIGASET_VERSION arg[0] */
+#define GIGVER_DRIVER 0		/* get driver version */
+#define GIGVER_COMPAT 1		/* get interface compatibility version */
+#define GIGVER_FWBASE 2		/* get base station firmware version */
+
+#endif
diff --git a/include/linux/gpio-fan.h b/include/linux/gpio-fan.h
new file mode 100644
index 00000000..09665916
--- /dev/null
+++ b/include/linux/gpio-fan.h
@@ -0,0 +1,36 @@
+/*
+ * include/linux/gpio-fan.h
+ *
+ * Platform data structure for GPIO fan driver
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __LINUX_GPIO_FAN_H
+#define __LINUX_GPIO_FAN_H
+
+struct gpio_fan_alarm {
+	unsigned	gpio;
+	unsigned	active_low;
+};
+
+struct gpio_fan_speed {
+	int rpm;
+	int ctrl_val;
+};
+
+struct gpio_fan_platform_data {
+	int			num_ctrl;
+	unsigned		*ctrl;	/* fan control GPIOs. */
+	struct gpio_fan_alarm	*alarm;	/* fan alarm GPIO. */
+	/*
+	 * Speed conversion array: rpm from/to GPIO bit field.
+	 * This array _must_ be sorted in ascending rpm order.
+	 */
+	int			num_speed;
+	struct gpio_fan_speed	*speed;
+};
+
+#endif /* __LINUX_GPIO_FAN_H */
diff --git a/include/linux/gpio-i2cmux.h b/include/linux/gpio-i2cmux.h
new file mode 100644
index 00000000..4a333bb0
--- /dev/null
+++ b/include/linux/gpio-i2cmux.h
@@ -0,0 +1,38 @@
+/*
+ * gpio-i2cmux interface to platform code
+ *
+ * Peter Korsgaard <peter.korsgaard@barco.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _LINUX_GPIO_I2CMUX_H
+#define _LINUX_GPIO_I2CMUX_H
+
+/* MUX has no specific idle mode */
+#define GPIO_I2CMUX_NO_IDLE	((unsigned)-1)
+
+/**
+ * struct gpio_i2cmux_platform_data - Platform-dependent data for gpio-i2cmux
+ * @parent: Parent I2C bus adapter number
+ * @base_nr: Base I2C bus number to number adapters from or zero for dynamic
+ * @values: Array of bitmasks of GPIO settings (low/high) for each
+ *	position
+ * @n_values: Number of multiplexer positions (busses to instantiate)
+ * @gpios: Array of GPIO numbers used to control MUX
+ * @n_gpios: Number of GPIOs used to control MUX
+ * @idle: Bitmask to write to MUX when idle or GPIO_I2CMUX_NO_IDLE if not used
+ */
+struct gpio_i2cmux_platform_data {
+	int parent;
+	int base_nr;
+	const unsigned *values;
+	int n_values;
+	const unsigned *gpios;
+	int n_gpios;
+	unsigned idle;
+};
+
+#endif /* _LINUX_GPIO_I2CMUX_H */
diff --git a/include/linux/gpio-pxa.h b/include/linux/gpio-pxa.h
new file mode 100644
index 00000000..d755b28b
--- /dev/null
+++ b/include/linux/gpio-pxa.h
@@ -0,0 +1,20 @@
+#ifndef __GPIO_PXA_H
+#define __GPIO_PXA_H
+
+#define GPIO_bit(x)	(1 << ((x) & 0x1f))
+
+#define gpio_to_bank(gpio)	((gpio) >> 5)
+
+/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
+ * Those cases currently cause holes in the GPIO number space, the
+ * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
+ */
+extern int pxa_last_gpio;
+
+extern int pxa_irq_to_gpio(int irq);
+
+struct pxa_gpio_platform_data {
+	int (*gpio_set_wake)(unsigned int gpio, unsigned int on);
+};
+
+#endif /* __GPIO_PXA_H */
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
new file mode 100644
index 00000000..6155ecf1
--- /dev/null
+++ b/include/linux/gpio.h
@@ -0,0 +1,177 @@
+#ifndef __LINUX_GPIO_H
+#define __LINUX_GPIO_H
+
+/* see Documentation/gpio.txt */
+
+/* make these flag values available regardless of GPIO kconfig options */
+#define GPIOF_DIR_OUT	(0 << 0)
+#define GPIOF_DIR_IN	(1 << 0)
+
+#define GPIOF_INIT_LOW	(0 << 1)
+#define GPIOF_INIT_HIGH	(1 << 1)
+
+#define GPIOF_IN		(GPIOF_DIR_IN)
+#define GPIOF_OUT_INIT_LOW	(GPIOF_DIR_OUT | GPIOF_INIT_LOW)
+#define GPIOF_OUT_INIT_HIGH	(GPIOF_DIR_OUT | GPIOF_INIT_HIGH)
+
+/* Gpio pin is open drain */
+#define GPIOF_OPEN_DRAIN	(1 << 2)
+
+/* Gpio pin is open source */
+#define GPIOF_OPEN_SOURCE	(1 << 3)
+
+/**
+ * struct gpio - a structure describing a GPIO with configuration
+ * @gpio:	the GPIO number
+ * @flags:	GPIO configuration as specified by GPIOF_*
+ * @label:	a literal description string of this GPIO
+ */
+struct gpio {
+	unsigned	gpio;
+	unsigned long	flags;
+	const char	*label;
+};
+
+#ifdef CONFIG_GENERIC_GPIO
+#include <asm/gpio.h>
+
+#else
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/bug.h>
+
+struct device;
+struct gpio_chip;
+
+static inline bool gpio_is_valid(int number)
+{
+	return false;
+}
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+	return -ENOSYS;
+}
+
+static inline int gpio_request_one(unsigned gpio,
+					unsigned long flags, const char *label)
+{
+	return -ENOSYS;
+}
+
+static inline int gpio_request_array(const struct gpio *array, size_t num)
+{
+	return -ENOSYS;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+	might_sleep();
+
+	/* GPIO can never have been requested */
+	WARN_ON(1);
+}
+
+static inline void gpio_free_array(const struct gpio *array, size_t num)
+{
+	might_sleep();
+
+	/* GPIO can never have been requested */
+	WARN_ON(1);
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+	return -ENOSYS;
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+	return -ENOSYS;
+}
+
+static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
+{
+	return -ENOSYS;
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	/* GPIO can never have been requested or set as {in,out}put */
+	WARN_ON(1);
+	return 0;
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	/* GPIO can never have been requested or set as output */
+	WARN_ON(1);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+	/* GPIO can never have been requested or set as {in,out}put */
+	WARN_ON(1);
+	return 0;
+}
+
+static inline int gpio_get_value_cansleep(unsigned gpio)
+{
+	/* GPIO can never have been requested or set as {in,out}put */
+	WARN_ON(1);
+	return 0;
+}
+
+static inline void gpio_set_value_cansleep(unsigned gpio, int value)
+{
+	/* GPIO can never have been requested or set as output */
+	WARN_ON(1);
+}
+
+static inline int gpio_export(unsigned gpio, bool direction_may_change)
+{
+	/* GPIO can never have been requested or set as {in,out}put */
+	WARN_ON(1);
+	return -EINVAL;
+}
+
+static inline int gpio_export_link(struct device *dev, const char *name,
+				unsigned gpio)
+{
+	/* GPIO can never have been exported */
+	WARN_ON(1);
+	return -EINVAL;
+}
+
+static inline int gpio_sysfs_set_active_low(unsigned gpio, int value)
+{
+	/* GPIO can never have been requested */
+	WARN_ON(1);
+	return -EINVAL;
+}
+
+static inline void gpio_unexport(unsigned gpio)
+{
+	/* GPIO can never have been exported */
+	WARN_ON(1);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	/* GPIO can never have been requested or set as input */
+	WARN_ON(1);
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	/* irq can never have been returned from gpio_to_irq() */
+	WARN_ON(1);
+	return -EINVAL;
+}
+
+#endif
+
+#endif /* __LINUX_GPIO_H */
diff --git a/include/linux/gpio_event.h b/include/linux/gpio_event.h
new file mode 100644
index 00000000..2613fc5e
--- /dev/null
+++ b/include/linux/gpio_event.h
@@ -0,0 +1,170 @@
+/* include/linux/gpio_event.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _LINUX_GPIO_EVENT_H
+#define _LINUX_GPIO_EVENT_H
+
+#include <linux/input.h>
+
+struct gpio_event_input_devs {
+	int count;
+	struct input_dev *dev[];
+};
+enum {
+	GPIO_EVENT_FUNC_UNINIT  = 0x0,
+	GPIO_EVENT_FUNC_INIT    = 0x1,
+	GPIO_EVENT_FUNC_SUSPEND = 0x2,
+	GPIO_EVENT_FUNC_RESUME  = 0x3,
+};
+struct gpio_event_info {
+	int (*func)(struct gpio_event_input_devs *input_devs,
+		    struct gpio_event_info *info,
+		    void **data, int func);
+	int (*event)(struct gpio_event_input_devs *input_devs,
+		     struct gpio_event_info *info,
+		     void **data, unsigned int dev, unsigned int type,
+		     unsigned int code, int value); /* out events */
+	bool no_suspend;
+};
+
+struct gpio_event_platform_data {
+	const char *name;
+	struct gpio_event_info **info;
+	size_t info_count;
+	int (*power)(const struct gpio_event_platform_data *pdata, bool on);
+	const char *names[]; /* If name is NULL, names contain a NULL */
+			     /* terminated list of input devices to create */
+};
+
+#define GPIO_EVENT_DEV_NAME "gpio-event"
+
+/* Key matrix */
+
+enum gpio_event_matrix_flags {
+	/* unset: drive active output low, set: drive active output high */
+	GPIOKPF_ACTIVE_HIGH              = 1U << 0,
+	GPIOKPF_DEBOUNCE                 = 1U << 1,
+	GPIOKPF_REMOVE_SOME_PHANTOM_KEYS = 1U << 2,
+	GPIOKPF_REMOVE_PHANTOM_KEYS      = GPIOKPF_REMOVE_SOME_PHANTOM_KEYS |
+					   GPIOKPF_DEBOUNCE,
+	GPIOKPF_DRIVE_INACTIVE           = 1U << 3,
+	GPIOKPF_LEVEL_TRIGGERED_IRQ      = 1U << 4,
+	GPIOKPF_PRINT_UNMAPPED_KEYS      = 1U << 16,
+	GPIOKPF_PRINT_MAPPED_KEYS        = 1U << 17,
+	GPIOKPF_PRINT_PHANTOM_KEYS       = 1U << 18,
+};
+
+#define MATRIX_CODE_BITS (10)
+#define MATRIX_KEY_MASK ((1U << MATRIX_CODE_BITS) - 1)
+#define MATRIX_KEY(dev, code) \
+	(((dev) << MATRIX_CODE_BITS) | (code & MATRIX_KEY_MASK))
+
+extern int gpio_event_matrix_func(struct gpio_event_input_devs *input_devs,
+			struct gpio_event_info *info, void **data, int func);
+struct gpio_event_matrix_info {
+	/* initialize to gpio_event_matrix_func */
+	struct gpio_event_info info;
+	/* size must be ninputs * noutputs */
+	const unsigned short *keymap;
+	unsigned int *input_gpios;
+	unsigned int *output_gpios;
+	unsigned int ninputs;
+	unsigned int noutputs;
+	/* time to wait before reading inputs after driving each output */
+	ktime_t settle_time;
+	/* time to wait before scanning the keypad a second time */
+	ktime_t debounce_delay;
+	ktime_t poll_time;
+	unsigned flags;
+};
+
+/* Directly connected inputs and outputs */
+
+enum gpio_event_direct_flags {
+	GPIOEDF_ACTIVE_HIGH         = 1U << 0,
+/*	GPIOEDF_USE_DOWN_IRQ        = 1U << 1, */
+/*	GPIOEDF_USE_IRQ             = (1U << 2) | GPIOIDF_USE_DOWN_IRQ, */
+	GPIOEDF_PRINT_KEYS          = 1U << 8,
+	GPIOEDF_PRINT_KEY_DEBOUNCE  = 1U << 9,
+	GPIOEDF_PRINT_KEY_UNSTABLE  = 1U << 10,
+};
+
+struct gpio_event_direct_entry {
+	uint32_t gpio:16;
+	uint32_t code:10;
+	uint32_t dev:6;
+};
+
+/* inputs */
+extern int gpio_event_input_func(struct gpio_event_input_devs *input_devs,
+			struct gpio_event_info *info, void **data, int func);
+struct gpio_event_input_info {
+	/* initialize to gpio_event_input_func */
+	struct gpio_event_info info;
+	ktime_t debounce_time;
+	ktime_t poll_time;
+	uint16_t flags;
+	uint16_t type;
+	const struct gpio_event_direct_entry *keymap;
+	size_t keymap_size;
+};
+
+/* outputs */
+extern int gpio_event_output_func(struct gpio_event_input_devs *input_devs,
+			struct gpio_event_info *info, void **data, int func);
+extern int gpio_event_output_event(struct gpio_event_input_devs *input_devs,
+			struct gpio_event_info *info, void **data,
+			unsigned int dev, unsigned int type,
+			unsigned int code, int value);
+struct gpio_event_output_info {
+	/* initialize to gpio_event_output_func and gpio_event_output_event */
+	struct gpio_event_info info;
+	uint16_t flags;
+	uint16_t type;
+	const struct gpio_event_direct_entry *keymap;
+	size_t keymap_size;
+};
+
+
+/* axes */
+
+enum gpio_event_axis_flags {
+	GPIOEAF_PRINT_UNKNOWN_DIRECTION  = 1U << 16,
+	GPIOEAF_PRINT_RAW                = 1U << 17,
+	GPIOEAF_PRINT_EVENT              = 1U << 18,
+};
+
+extern int gpio_event_axis_func(struct gpio_event_input_devs *input_devs,
+			struct gpio_event_info *info, void **data, int func);
+struct gpio_event_axis_info {
+	/* initialize to gpio_event_axis_func */
+	struct gpio_event_info info;
+	uint8_t  count; /* number of gpios for this axis */
+	uint8_t  dev; /* device index when using multiple input devices */
+	uint8_t  type; /* EV_REL or EV_ABS */
+	uint16_t code;
+	uint16_t decoded_size;
+	uint16_t (*map)(struct gpio_event_axis_info *info, uint16_t in);
+	uint32_t *gpio;
+	uint32_t flags;
+};
+#define gpio_axis_2bit_gray_map gpio_axis_4bit_gray_map
+#define gpio_axis_3bit_gray_map gpio_axis_4bit_gray_map
+uint16_t gpio_axis_4bit_gray_map(
+			struct gpio_event_axis_info *info, uint16_t in);
+uint16_t gpio_axis_5bit_singletrack_map(
+			struct gpio_event_axis_info *info, uint16_t in);
+
+#endif
diff --git a/include/linux/gpio_keys.h b/include/linux/gpio_keys.h
new file mode 100644
index 00000000..a7e977ff
--- /dev/null
+++ b/include/linux/gpio_keys.h
@@ -0,0 +1,31 @@
+#ifndef _GPIO_KEYS_H
+#define _GPIO_KEYS_H
+
+struct device;
+
+struct gpio_keys_button {
+	/* Configuration parameters */
+	unsigned int code;	/* input event code (KEY_*, SW_*) */
+	int gpio;		/* -1 if this key does not support gpio */
+	int active_low;
+	const char *desc;
+	unsigned int type;	/* input event type (EV_KEY, EV_SW, EV_ABS) */
+	int wakeup;		/* configure the button as a wake-up source */
+	int debounce_interval;	/* debounce ticks interval in msecs */
+	bool can_disable;
+	int value;		/* axis value for EV_ABS */
+	unsigned int irq;	/* Irq number in case of interrupt keys */
+};
+
+struct gpio_keys_platform_data {
+	struct gpio_keys_button *buttons;
+	int nbuttons;
+	unsigned int poll_interval;	/* polling interval in msecs -
+					   for polling driver only */
+	unsigned int rep:1;		/* enable input subsystem auto repeat */
+	int (*enable)(struct device *dev);
+	void (*disable)(struct device *dev);
+	const char *name;		/* input device name */
+};
+
+#endif
diff --git a/include/linux/gpio_mouse.h b/include/linux/gpio_mouse.h
new file mode 100644
index 00000000..44ed7aa1
--- /dev/null
+++ b/include/linux/gpio_mouse.h
@@ -0,0 +1,61 @@
+/*
+ * Driver for simulating a mouse on GPIO lines.
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _GPIO_MOUSE_H
+#define _GPIO_MOUSE_H
+
+#define GPIO_MOUSE_POLARITY_ACT_HIGH	0x00
+#define GPIO_MOUSE_POLARITY_ACT_LOW	0x01
+
+#define GPIO_MOUSE_PIN_UP	0
+#define GPIO_MOUSE_PIN_DOWN	1
+#define GPIO_MOUSE_PIN_LEFT	2
+#define GPIO_MOUSE_PIN_RIGHT	3
+#define GPIO_MOUSE_PIN_BLEFT	4
+#define GPIO_MOUSE_PIN_BMIDDLE	5
+#define GPIO_MOUSE_PIN_BRIGHT	6
+#define GPIO_MOUSE_PIN_MAX	7
+
+/**
+ * struct gpio_mouse_platform_data
+ * @scan_ms: integer in ms specifying the scan periode.
+ * @polarity: Pin polarity, active high or low.
+ * @up: GPIO line for up value.
+ * @down: GPIO line for down value.
+ * @left: GPIO line for left value.
+ * @right: GPIO line for right value.
+ * @bleft: GPIO line for left button.
+ * @bmiddle: GPIO line for middle button.
+ * @bright: GPIO line for right button.
+ *
+ * This struct must be added to the platform_device in the board code.
+ * It is used by the gpio_mouse driver to setup GPIO lines and to
+ * calculate mouse movement.
+ */
+struct gpio_mouse_platform_data {
+	int scan_ms;
+	int polarity;
+
+	union {
+		struct {
+			int up;
+			int down;
+			int left;
+			int right;
+
+			int bleft;
+			int bmiddle;
+			int bright;
+		};
+		int pins[GPIO_MOUSE_PIN_MAX];
+	};
+};
+
+#endif /* _GPIO_MOUSE_H */
diff --git a/include/linux/gsmmux.h b/include/linux/gsmmux.h
new file mode 100644
index 00000000..c25e9477
--- /dev/null
+++ b/include/linux/gsmmux.h
@@ -0,0 +1,36 @@
+#ifndef _LINUX_GSMMUX_H
+#define _LINUX_GSMMUX_H
+
+struct gsm_config
+{
+	unsigned int adaption;
+	unsigned int encapsulation;
+	unsigned int initiator;
+	unsigned int t1;
+	unsigned int t2;
+	unsigned int t3;
+	unsigned int n2;
+	unsigned int mru;
+	unsigned int mtu;
+	unsigned int k;
+	unsigned int i;
+	unsigned int unused[8];		/* Padding for expansion without
+					   breaking stuff */
+};
+
+#define GSMIOC_GETCONF		_IOR('G', 0, struct gsm_config)
+#define GSMIOC_SETCONF		_IOW('G', 1, struct gsm_config)
+
+struct gsm_netconfig {
+	unsigned int adaption;  /* Adaption to use in network mode */
+	unsigned short protocol;/* Protocol to use - only ETH_P_IP supported */
+	unsigned short unused2;
+	char if_name[IFNAMSIZ];	/* interface name format string */
+	__u8 unused[28];        /* For future use */
+};
+
+#define GSMIOC_ENABLE_NET      _IOW('G', 2, struct gsm_netconfig)
+#define GSMIOC_DISABLE_NET     _IO('G', 3)
+
+
+#endif
diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h
new file mode 100644
index 00000000..bb7f3097
--- /dev/null
+++ b/include/linux/hardirq.h
@@ -0,0 +1,210 @@
+#ifndef LINUX_HARDIRQ_H
+#define LINUX_HARDIRQ_H
+
+#include <linux/preempt.h>
+#include <linux/lockdep.h>
+#include <linux/ftrace_irq.h>
+#include <asm/hardirq.h>
+
+/*
+ * We put the hardirq and softirq counter into the preemption
+ * counter. The bitmask has the following meaning:
+ *
+ * - bits 0-7 are the preemption count (max preemption depth: 256)
+ * - bits 8-15 are the softirq count (max # of softirqs: 256)
+ *
+ * The hardirq count can in theory reach the same as NR_IRQS.
+ * In reality, the number of nested IRQS is limited to the stack
+ * size as well. For archs with over 1000 IRQS it is not practical
+ * to expect that they will all nest. We give a max of 10 bits for
+ * hardirq nesting. An arch may choose to give less than 10 bits.
+ * m68k expects it to be 8.
+ *
+ * - bits 16-25 are the hardirq count (max # of nested hardirqs: 1024)
+ * - bit 26 is the NMI_MASK
+ * - bit 28 is the PREEMPT_ACTIVE flag
+ *
+ * PREEMPT_MASK: 0x000000ff
+ * SOFTIRQ_MASK: 0x0000ff00
+ * HARDIRQ_MASK: 0x03ff0000
+ *     NMI_MASK: 0x04000000
+ */
+#define PREEMPT_BITS	8
+#define SOFTIRQ_BITS	8
+#define NMI_BITS	1
+
+#define MAX_HARDIRQ_BITS 10
+
+#ifndef HARDIRQ_BITS
+# define HARDIRQ_BITS	MAX_HARDIRQ_BITS
+#endif
+
+#if HARDIRQ_BITS > MAX_HARDIRQ_BITS
+#error HARDIRQ_BITS too high!
+#endif
+
+#define PREEMPT_SHIFT	0
+#define SOFTIRQ_SHIFT	(PREEMPT_SHIFT + PREEMPT_BITS)
+#define HARDIRQ_SHIFT	(SOFTIRQ_SHIFT + SOFTIRQ_BITS)
+#define NMI_SHIFT	(HARDIRQ_SHIFT + HARDIRQ_BITS)
+
+#define __IRQ_MASK(x)	((1UL << (x))-1)
+
+#define PREEMPT_MASK	(__IRQ_MASK(PREEMPT_BITS) << PREEMPT_SHIFT)
+#define SOFTIRQ_MASK	(__IRQ_MASK(SOFTIRQ_BITS) << SOFTIRQ_SHIFT)
+#define HARDIRQ_MASK	(__IRQ_MASK(HARDIRQ_BITS) << HARDIRQ_SHIFT)
+#define NMI_MASK	(__IRQ_MASK(NMI_BITS)     << NMI_SHIFT)
+
+#define PREEMPT_OFFSET	(1UL << PREEMPT_SHIFT)
+#define SOFTIRQ_OFFSET	(1UL << SOFTIRQ_SHIFT)
+#define HARDIRQ_OFFSET	(1UL << HARDIRQ_SHIFT)
+#define NMI_OFFSET	(1UL << NMI_SHIFT)
+
+#define SOFTIRQ_DISABLE_OFFSET	(2 * SOFTIRQ_OFFSET)
+
+#ifndef PREEMPT_ACTIVE
+#define PREEMPT_ACTIVE_BITS	1
+#define PREEMPT_ACTIVE_SHIFT	(NMI_SHIFT + NMI_BITS)
+#define PREEMPT_ACTIVE	(__IRQ_MASK(PREEMPT_ACTIVE_BITS) << PREEMPT_ACTIVE_SHIFT)
+#endif
+
+#if PREEMPT_ACTIVE < (1 << (NMI_SHIFT + NMI_BITS))
+#error PREEMPT_ACTIVE is too low!
+#endif
+
+#define hardirq_count()	(preempt_count() & HARDIRQ_MASK)
+#define softirq_count()	(preempt_count() & SOFTIRQ_MASK)
+#define irq_count()	(preempt_count() & (HARDIRQ_MASK | SOFTIRQ_MASK \
+				 | NMI_MASK))
+
+/*
+ * Are we doing bottom half or hardware interrupt processing?
+ * Are we in a softirq context? Interrupt context?
+ * in_softirq - Are we currently processing softirq or have bh disabled?
+ * in_serving_softirq - Are we currently processing softirq?
+ */
+#define in_irq()		(hardirq_count())
+#define in_softirq()		(softirq_count())
+#define in_interrupt()		(irq_count())
+#define in_serving_softirq()	(softirq_count() & SOFTIRQ_OFFSET)
+
+/*
+ * Are we in NMI context?
+ */
+#define in_nmi()	(preempt_count() & NMI_MASK)
+
+#if defined(CONFIG_PREEMPT_COUNT)
+# define PREEMPT_CHECK_OFFSET 1
+#else
+# define PREEMPT_CHECK_OFFSET 0
+#endif
+
+/*
+ * Are we running in atomic context?  WARNING: this macro cannot
+ * always detect atomic context; in particular, it cannot know about
+ * held spinlocks in non-preemptible kernels.  Thus it should not be
+ * used in the general case to determine whether sleeping is possible.
+ * Do not use in_atomic() in driver code.
+ */
+#define in_atomic()	((preempt_count() & ~PREEMPT_ACTIVE) != 0)
+
+/*
+ * Check whether we were atomic before we did preempt_disable():
+ * (used by the scheduler, *after* releasing the kernel lock)
+ */
+#define in_atomic_preempt_off() \
+		((preempt_count() & ~PREEMPT_ACTIVE) != PREEMPT_CHECK_OFFSET)
+
+#ifdef CONFIG_PREEMPT_COUNT
+# define preemptible()	(preempt_count() == 0 && !irqs_disabled())
+# define IRQ_EXIT_OFFSET (HARDIRQ_OFFSET-1)
+#else
+# define preemptible()	0
+# define IRQ_EXIT_OFFSET HARDIRQ_OFFSET
+#endif
+
+#if defined(CONFIG_SMP) || defined(CONFIG_GENERIC_HARDIRQS)
+extern void synchronize_irq(unsigned int irq);
+#else
+# define synchronize_irq(irq)	barrier()
+#endif
+
+struct task_struct;
+
+#if !defined(CONFIG_VIRT_CPU_ACCOUNTING) && !defined(CONFIG_IRQ_TIME_ACCOUNTING)
+static inline void account_system_vtime(struct task_struct *tsk)
+{
+}
+#else
+extern void account_system_vtime(struct task_struct *tsk);
+#endif
+
+#if defined(CONFIG_TINY_RCU) || defined(CONFIG_TINY_PREEMPT_RCU)
+
+static inline void rcu_nmi_enter(void)
+{
+}
+
+static inline void rcu_nmi_exit(void)
+{
+}
+
+#else
+extern void rcu_nmi_enter(void);
+extern void rcu_nmi_exit(void);
+#endif
+
+/*
+ * It is safe to do non-atomic ops on ->hardirq_context,
+ * because NMI handlers may not preempt and the ops are
+ * always balanced, so the interrupted value of ->hardirq_context
+ * will always be restored.
+ */
+#define __irq_enter()					\
+	do {						\
+		account_system_vtime(current);		\
+		add_preempt_count(HARDIRQ_OFFSET);	\
+		trace_hardirq_enter();			\
+	} while (0)
+
+/*
+ * Enter irq context (on NO_HZ, update jiffies):
+ */
+extern void irq_enter(void);
+
+/*
+ * Exit irq context without processing softirqs:
+ */
+#define __irq_exit()					\
+	do {						\
+		trace_hardirq_exit();			\
+		account_system_vtime(current);		\
+		sub_preempt_count(HARDIRQ_OFFSET);	\
+	} while (0)
+
+/*
+ * Exit irq context and process softirqs if needed:
+ */
+extern void irq_exit(void);
+
+#define nmi_enter()						\
+	do {							\
+		ftrace_nmi_enter();				\
+		BUG_ON(in_nmi());				\
+		add_preempt_count(NMI_OFFSET + HARDIRQ_OFFSET);	\
+		lockdep_off();					\
+		rcu_nmi_enter();				\
+		trace_hardirq_enter();				\
+	} while (0)
+
+#define nmi_exit()						\
+	do {							\
+		trace_hardirq_exit();				\
+		rcu_nmi_exit();					\
+		lockdep_on();					\
+		BUG_ON(!in_nmi());				\
+		sub_preempt_count(NMI_OFFSET + HARDIRQ_OFFSET);	\
+		ftrace_nmi_exit();				\
+	} while (0)
+
+#endif /* LINUX_HARDIRQ_H */
diff --git a/include/linux/hash.h b/include/linux/hash.h
new file mode 100644
index 00000000..b80506bd
--- /dev/null
+++ b/include/linux/hash.h
@@ -0,0 +1,70 @@
+#ifndef _LINUX_HASH_H
+#define _LINUX_HASH_H
+/* Fast hashing routine for ints,  longs and pointers.
+   (C) 2002 William Lee Irwin III, IBM */
+
+/*
+ * Knuth recommends primes in approximately golden ratio to the maximum
+ * integer representable by a machine word for multiplicative hashing.
+ * Chuck Lever verified the effectiveness of this technique:
+ * http://www.citi.umich.edu/techreports/reports/citi-tr-00-1.pdf
+ *
+ * These primes are chosen to be bit-sparse, that is operations on
+ * them can use shifts and additions instead of multiplications for
+ * machines where multiplications are slow.
+ */
+
+#include <asm/types.h>
+
+/* 2^31 + 2^29 - 2^25 + 2^22 - 2^19 - 2^16 + 1 */
+#define GOLDEN_RATIO_PRIME_32 0x9e370001UL
+/*  2^63 + 2^61 - 2^57 + 2^54 - 2^51 - 2^18 + 1 */
+#define GOLDEN_RATIO_PRIME_64 0x9e37fffffffc0001UL
+
+#if BITS_PER_LONG == 32
+#define GOLDEN_RATIO_PRIME GOLDEN_RATIO_PRIME_32
+#define hash_long(val, bits) hash_32(val, bits)
+#elif BITS_PER_LONG == 64
+#define hash_long(val, bits) hash_64(val, bits)
+#define GOLDEN_RATIO_PRIME GOLDEN_RATIO_PRIME_64
+#else
+#error Wordsize not 32 or 64
+#endif
+
+static inline u64 hash_64(u64 val, unsigned int bits)
+{
+	u64 hash = val;
+
+	/*  Sigh, gcc can't optimise this alone like it does for 32 bits. */
+	u64 n = hash;
+	n <<= 18;
+	hash -= n;
+	n <<= 33;
+	hash -= n;
+	n <<= 3;
+	hash += n;
+	n <<= 3;
+	hash -= n;
+	n <<= 4;
+	hash += n;
+	n <<= 2;
+	hash += n;
+
+	/* High bits are more random, so use them. */
+	return hash >> (64 - bits);
+}
+
+static inline u32 hash_32(u32 val, unsigned int bits)
+{
+	/* On some cpus multiply is faster, on others gcc will do shifts */
+	u32 hash = val * GOLDEN_RATIO_PRIME_32;
+
+	/* High bits are more random, so use them. */
+	return hash >> (32 - bits);
+}
+
+static inline unsigned long hash_ptr(const void *ptr, unsigned int bits)
+{
+	return hash_long((unsigned long)ptr, bits);
+}
+#endif /* _LINUX_HASH_H */
diff --git a/include/linux/hdlc.h b/include/linux/hdlc.h
new file mode 100644
index 00000000..ee275c8b
--- /dev/null
+++ b/include/linux/hdlc.h
@@ -0,0 +1,131 @@
+/*
+ * Generic HDLC support routines for Linux
+ *
+ * Copyright (C) 1999-2005 Krzysztof Halasa <khc@pm.waw.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ */
+
+#ifndef __HDLC_H
+#define __HDLC_H
+
+
+#define HDLC_MAX_MTU 1500	/* Ethernet 1500 bytes */
+#if 0
+#define HDLC_MAX_MRU (HDLC_MAX_MTU + 10 + 14 + 4) /* for ETH+VLAN over FR */
+#else
+#define HDLC_MAX_MRU 1600 /* as required for FR network */
+#endif
+
+
+#ifdef __KERNEL__
+
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/hdlc/ioctl.h>
+
+/* This structure is a private property of HDLC protocols.
+   Hardware drivers have no interest here */
+
+struct hdlc_proto {
+	int (*open)(struct net_device *dev);
+	void (*close)(struct net_device *dev);
+	void (*start)(struct net_device *dev); /* if open & DCD */
+	void (*stop)(struct net_device *dev); /* if open & !DCD */
+	void (*detach)(struct net_device *dev);
+	int (*ioctl)(struct net_device *dev, struct ifreq *ifr);
+	__be16 (*type_trans)(struct sk_buff *skb, struct net_device *dev);
+	int (*netif_rx)(struct sk_buff *skb);
+	netdev_tx_t (*xmit)(struct sk_buff *skb, struct net_device *dev);
+	struct module *module;
+	struct hdlc_proto *next; /* next protocol in the list */
+};
+
+
+/* Pointed to by netdev_priv(dev) */
+typedef struct hdlc_device {
+	/* used by HDLC layer to take control over HDLC device from hw driver*/
+	int (*attach)(struct net_device *dev,
+		      unsigned short encoding, unsigned short parity);
+
+	/* hardware driver must handle this instead of dev->hard_start_xmit */
+	netdev_tx_t (*xmit)(struct sk_buff *skb, struct net_device *dev);
+
+	/* Things below are for HDLC layer internal use only */
+	const struct hdlc_proto *proto;
+	int carrier;
+	int open;
+	spinlock_t state_lock;
+	void *state;
+	void *priv;
+} hdlc_device;
+
+
+
+/* Exported from hdlc module */
+
+/* Called by hardware driver when a user requests HDLC service */
+int hdlc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
+
+/* Must be used by hardware driver on module startup/exit */
+#define register_hdlc_device(dev)	register_netdev(dev)
+void unregister_hdlc_device(struct net_device *dev);
+
+
+void register_hdlc_protocol(struct hdlc_proto *proto);
+void unregister_hdlc_protocol(struct hdlc_proto *proto);
+
+struct net_device *alloc_hdlcdev(void *priv);
+
+static inline struct hdlc_device* dev_to_hdlc(struct net_device *dev)
+{
+	return netdev_priv(dev);
+}
+
+static __inline__ void debug_frame(const struct sk_buff *skb)
+{
+	int i;
+
+	for (i=0; i < skb->len; i++) {
+		if (i == 100) {
+			printk("...\n");
+			return;
+		}
+		printk(" %02X", skb->data[i]);
+	}
+	printk("\n");
+}
+
+
+/* Must be called by hardware driver when HDLC device is being opened */
+int hdlc_open(struct net_device *dev);
+/* Must be called by hardware driver when HDLC device is being closed */
+void hdlc_close(struct net_device *dev);
+/* May be used by hardware driver */
+int hdlc_change_mtu(struct net_device *dev, int new_mtu);
+/* Must be pointed to by hw driver's dev->netdev_ops->ndo_start_xmit */
+netdev_tx_t hdlc_start_xmit(struct sk_buff *skb, struct net_device *dev);
+
+int attach_hdlc_protocol(struct net_device *dev, struct hdlc_proto *proto,
+			 size_t size);
+/* May be used by hardware driver to gain control over HDLC device */
+void detach_hdlc_protocol(struct net_device *dev);
+
+static __inline__ __be16 hdlc_type_trans(struct sk_buff *skb,
+					 struct net_device *dev)
+{
+	hdlc_device *hdlc = dev_to_hdlc(dev);
+
+	skb->dev = dev;
+	skb_reset_mac_header(skb);
+
+	if (hdlc->proto->type_trans)
+		return hdlc->proto->type_trans(skb, dev);
+	else
+		return htons(ETH_P_HDLC);
+}
+
+#endif /* __KERNEL */
+#endif /* __HDLC_H */
diff --git a/include/linux/hdlc/Kbuild b/include/linux/hdlc/Kbuild
new file mode 100644
index 00000000..1fb26448
--- /dev/null
+++ b/include/linux/hdlc/Kbuild
@@ -0,0 +1 @@
+header-y += ioctl.h
diff --git a/include/linux/hdlc/ioctl.h b/include/linux/hdlc/ioctl.h
new file mode 100644
index 00000000..58397236
--- /dev/null
+++ b/include/linux/hdlc/ioctl.h
@@ -0,0 +1,81 @@
+#ifndef __HDLC_IOCTL_H__
+#define __HDLC_IOCTL_H__
+
+
+#define GENERIC_HDLC_VERSION 4	/* For synchronization with sethdlc utility */
+
+#define CLOCK_DEFAULT   0	/* Default setting */
+#define CLOCK_EXT	1	/* External TX and RX clock - DTE */
+#define CLOCK_INT	2	/* Internal TX and RX clock - DCE */
+#define CLOCK_TXINT	3	/* Internal TX and external RX clock */
+#define CLOCK_TXFROMRX	4	/* TX clock derived from external RX clock */
+
+
+#define ENCODING_DEFAULT	0 /* Default setting */
+#define ENCODING_NRZ		1
+#define ENCODING_NRZI		2
+#define ENCODING_FM_MARK	3
+#define ENCODING_FM_SPACE	4
+#define ENCODING_MANCHESTER	5
+
+
+#define PARITY_DEFAULT		0 /* Default setting */
+#define PARITY_NONE		1 /* No parity */
+#define PARITY_CRC16_PR0	2 /* CRC16, initial value 0x0000 */
+#define PARITY_CRC16_PR1	3 /* CRC16, initial value 0xFFFF */
+#define PARITY_CRC16_PR0_CCITT	4 /* CRC16, initial 0x0000, ITU-T version */
+#define PARITY_CRC16_PR1_CCITT	5 /* CRC16, initial 0xFFFF, ITU-T version */
+#define PARITY_CRC32_PR0_CCITT	6 /* CRC32, initial value 0x00000000 */
+#define PARITY_CRC32_PR1_CCITT	7 /* CRC32, initial value 0xFFFFFFFF */
+
+#define LMI_DEFAULT		0 /* Default setting */
+#define LMI_NONE		1 /* No LMI, all PVCs are static */
+#define LMI_ANSI		2 /* ANSI Annex D */
+#define LMI_CCITT		3 /* ITU-T Annex A */
+#define LMI_CISCO		4 /* The "original" LMI, aka Gang of Four */
+
+typedef struct { 
+	unsigned int clock_rate; /* bits per second */
+	unsigned int clock_type; /* internal, external, TX-internal etc. */
+	unsigned short loopback;
+} sync_serial_settings;          /* V.35, V.24, X.21 */
+
+typedef struct { 
+	unsigned int clock_rate; /* bits per second */
+	unsigned int clock_type; /* internal, external, TX-internal etc. */
+	unsigned short loopback;
+	unsigned int slot_map;
+} te1_settings;                  /* T1, E1 */
+
+typedef struct {
+	unsigned short encoding;
+	unsigned short parity;
+} raw_hdlc_proto;
+
+typedef struct {
+	unsigned int t391;
+	unsigned int t392;
+	unsigned int n391;
+	unsigned int n392;
+	unsigned int n393;
+	unsigned short lmi;
+	unsigned short dce; /* 1 for DCE (network side) operation */
+} fr_proto;
+
+typedef struct {
+	unsigned int dlci;
+} fr_proto_pvc;          /* for creating/deleting FR PVCs */
+
+typedef struct {
+	unsigned int dlci;
+	char master[IFNAMSIZ];	/* Name of master FRAD device */
+}fr_proto_pvc_info;		/* for returning PVC information only */
+
+typedef struct {
+    unsigned int interval;
+    unsigned int timeout;
+} cisco_proto;
+
+/* PPP doesn't need any info now - supply length = 0 to ioctl */
+
+#endif /* __HDLC_IOCTL_H__ */
diff --git a/include/linux/hdlcdrv.h b/include/linux/hdlcdrv.h
new file mode 100644
index 00000000..c010b4a7
--- /dev/null
+++ b/include/linux/hdlcdrv.h
@@ -0,0 +1,377 @@
+/*
+ * hdlcdrv.h  -- HDLC packet radio network driver.
+ * The Linux soundcard driver for 1200 baud and 9600 baud packet radio
+ * (C) 1996-1998 by Thomas Sailer, HB9JNX/AE4WA
+ */
+
+#ifndef _HDLCDRV_H
+#define _HDLCDRV_H
+
+/* -------------------------------------------------------------------- */
+/*
+ * structs for the IOCTL commands
+ */
+
+struct hdlcdrv_params {
+	int iobase;
+	int irq;
+	int dma;
+	int dma2;
+	int seriobase;
+	int pariobase;
+	int midiiobase;
+};	
+
+struct hdlcdrv_channel_params {
+	int tx_delay;  /* the transmitter keyup delay in 10ms units */
+	int tx_tail;   /* the transmitter keyoff delay in 10ms units */
+	int slottime;  /* the slottime in 10ms; usually 10 = 100ms */
+	int ppersist;  /* the p-persistence 0..255 */
+	int fulldup;   /* some driver do not support full duplex, setting */
+	               /* this just makes them send even if DCD is on */
+};	
+
+struct hdlcdrv_old_channel_state {
+  	int ptt;
+  	int dcd;
+  	int ptt_keyed;
+};
+
+struct hdlcdrv_channel_state {
+ 	int ptt;
+ 	int dcd;
+ 	int ptt_keyed;
+ 	unsigned long tx_packets;
+ 	unsigned long tx_errors;
+ 	unsigned long rx_packets;
+ 	unsigned long rx_errors;
+};
+
+struct hdlcdrv_ioctl {
+	int cmd;
+	union {
+		struct hdlcdrv_params mp;
+		struct hdlcdrv_channel_params cp;
+		struct hdlcdrv_channel_state cs;
+		struct hdlcdrv_old_channel_state ocs;
+		unsigned int calibrate;
+		unsigned char bits;
+		char modename[128];
+		char drivername[32];
+	} data;
+};
+
+/* -------------------------------------------------------------------- */
+
+/*
+ * ioctl values
+ */
+#define HDLCDRVCTL_GETMODEMPAR       0
+#define HDLCDRVCTL_SETMODEMPAR       1
+#define HDLCDRVCTL_MODEMPARMASK      2  /* not handled by hdlcdrv */
+#define HDLCDRVCTL_GETCHANNELPAR    10
+#define HDLCDRVCTL_SETCHANNELPAR    11
+#define HDLCDRVCTL_OLDGETSTAT       20
+#define HDLCDRVCTL_CALIBRATE        21
+#define HDLCDRVCTL_GETSTAT          22
+
+/*
+ * these are mainly for debugging purposes
+ */
+#define HDLCDRVCTL_GETSAMPLES       30
+#define HDLCDRVCTL_GETBITS          31
+
+/*
+ * not handled by hdlcdrv, but by its depending drivers
+ */
+#define HDLCDRVCTL_GETMODE          40
+#define HDLCDRVCTL_SETMODE          41
+#define HDLCDRVCTL_MODELIST         42
+#define HDLCDRVCTL_DRIVERNAME       43
+
+/*
+ * mask of needed modem parameters, returned by HDLCDRVCTL_MODEMPARMASK
+ */
+#define HDLCDRV_PARMASK_IOBASE      (1<<0)
+#define HDLCDRV_PARMASK_IRQ         (1<<1)
+#define HDLCDRV_PARMASK_DMA         (1<<2)
+#define HDLCDRV_PARMASK_DMA2        (1<<3)
+#define HDLCDRV_PARMASK_SERIOBASE   (1<<4)
+#define HDLCDRV_PARMASK_PARIOBASE   (1<<5)
+#define HDLCDRV_PARMASK_MIDIIOBASE  (1<<6)
+
+/* -------------------------------------------------------------------- */
+
+#ifdef __KERNEL__
+
+#include <linux/netdevice.h>
+#include <linux/if.h>
+#include <linux/spinlock.h>
+
+#define HDLCDRV_MAGIC      0x5ac6e778
+#define HDLCDRV_HDLCBUFFER  32 /* should be a power of 2 for speed reasons */
+#define HDLCDRV_BITBUFFER  256 /* should be a power of 2 for speed reasons */
+#undef HDLCDRV_LOOPBACK  /* define for HDLC debugging purposes */
+#define HDLCDRV_DEBUG
+
+/* maximum packet length, excluding CRC */
+#define HDLCDRV_MAXFLEN             400	
+
+
+struct hdlcdrv_hdlcbuffer {
+	spinlock_t lock;
+	unsigned rd, wr;
+	unsigned short buf[HDLCDRV_HDLCBUFFER];
+};
+
+#ifdef HDLCDRV_DEBUG
+struct hdlcdrv_bitbuffer {
+	unsigned int rd;
+	unsigned int wr;
+	unsigned int shreg;
+	unsigned char buffer[HDLCDRV_BITBUFFER];
+};
+
+static inline void hdlcdrv_add_bitbuffer(struct hdlcdrv_bitbuffer *buf, 
+					 unsigned int bit)
+{
+	unsigned char new;
+
+	new = buf->shreg & 1;
+	buf->shreg >>= 1;
+	buf->shreg |= (!!bit) << 7;
+	if (new) {
+		buf->buffer[buf->wr] = buf->shreg;
+		buf->wr = (buf->wr+1) % sizeof(buf->buffer);
+		buf->shreg = 0x80;
+	}
+}
+
+static inline void hdlcdrv_add_bitbuffer_word(struct hdlcdrv_bitbuffer *buf, 
+					      unsigned int bits)
+{
+	buf->buffer[buf->wr] = bits & 0xff;
+	buf->wr = (buf->wr+1) % sizeof(buf->buffer);
+	buf->buffer[buf->wr] = (bits >> 8) & 0xff;
+	buf->wr = (buf->wr+1) % sizeof(buf->buffer);
+
+}
+#endif /* HDLCDRV_DEBUG */
+
+/* -------------------------------------------------------------------- */
+/*
+ * Information that need to be kept for each driver. 
+ */
+
+struct hdlcdrv_ops {
+	/*
+	 * first some informations needed by the hdlcdrv routines
+	 */
+	const char *drvname;
+	const char *drvinfo;
+	/*
+	 * the routines called by the hdlcdrv routines
+	 */
+	int (*open)(struct net_device *);
+	int (*close)(struct net_device *);
+	int (*ioctl)(struct net_device *, struct ifreq *, 
+		     struct hdlcdrv_ioctl *, int);
+};
+
+struct hdlcdrv_state {
+	int magic;
+	int opened;
+
+	const struct hdlcdrv_ops *ops;
+
+	struct {
+		int bitrate;
+	} par;
+
+	struct hdlcdrv_pttoutput {
+		int dma2;
+		int seriobase;
+		int pariobase;
+		int midiiobase;
+		unsigned int flags;
+	} ptt_out;
+
+	struct hdlcdrv_channel_params ch_params;
+
+	struct hdlcdrv_hdlcrx {
+		struct hdlcdrv_hdlcbuffer hbuf;
+		unsigned long in_hdlc_rx;
+		/* 0 = sync hunt, != 0 receiving */
+		int rx_state;	
+		unsigned int bitstream;
+		unsigned int bitbuf;
+		int numbits;
+		unsigned char dcd;
+		
+		int len;
+		unsigned char *bp;
+		unsigned char buffer[HDLCDRV_MAXFLEN+2];
+	} hdlcrx;
+
+	struct hdlcdrv_hdlctx {
+		struct hdlcdrv_hdlcbuffer hbuf;
+		unsigned long in_hdlc_tx;
+		/*
+		 * 0 = send flags
+		 * 1 = send txtail (flags)
+		 * 2 = send packet
+		 */
+		int tx_state;	
+		int numflags;
+		unsigned int bitstream;
+		unsigned char ptt;
+		int calibrate;
+		int slotcnt;
+
+		unsigned int bitbuf;
+		int numbits;
+		
+		int len;
+		unsigned char *bp;
+		unsigned char buffer[HDLCDRV_MAXFLEN+2];
+	} hdlctx;
+
+#ifdef HDLCDRV_DEBUG
+	struct hdlcdrv_bitbuffer bitbuf_channel;
+	struct hdlcdrv_bitbuffer bitbuf_hdlc;
+#endif /* HDLCDRV_DEBUG */
+
+	int ptt_keyed;
+
+	/* queued skb for transmission */
+	struct sk_buff *skb;
+};
+
+
+/* -------------------------------------------------------------------- */
+
+static inline int hdlcdrv_hbuf_full(struct hdlcdrv_hdlcbuffer *hb) 
+{
+	unsigned long flags;
+	int ret;
+	
+	spin_lock_irqsave(&hb->lock, flags);
+	ret = !((HDLCDRV_HDLCBUFFER - 1 + hb->rd - hb->wr) % HDLCDRV_HDLCBUFFER);
+	spin_unlock_irqrestore(&hb->lock, flags);
+	return ret;
+}
+
+/* -------------------------------------------------------------------- */
+
+static inline int hdlcdrv_hbuf_empty(struct hdlcdrv_hdlcbuffer *hb)
+{
+	unsigned long flags;
+	int ret;
+	
+	spin_lock_irqsave(&hb->lock, flags);
+	ret = (hb->rd == hb->wr);
+	spin_unlock_irqrestore(&hb->lock, flags);
+	return ret;
+}
+
+/* -------------------------------------------------------------------- */
+
+static inline unsigned short hdlcdrv_hbuf_get(struct hdlcdrv_hdlcbuffer *hb)
+{
+	unsigned long flags;
+	unsigned short val;
+	unsigned newr;
+
+	spin_lock_irqsave(&hb->lock, flags);
+	if (hb->rd == hb->wr)
+		val = 0;
+	else {
+		newr = (hb->rd+1) % HDLCDRV_HDLCBUFFER;
+		val = hb->buf[hb->rd];
+		hb->rd = newr;
+	}
+	spin_unlock_irqrestore(&hb->lock, flags);
+	return val;
+}
+
+/* -------------------------------------------------------------------- */
+
+static inline void hdlcdrv_hbuf_put(struct hdlcdrv_hdlcbuffer *hb, 
+				    unsigned short val)
+{
+	unsigned newp;
+	unsigned long flags;
+	
+	spin_lock_irqsave(&hb->lock, flags);
+	newp = (hb->wr+1) % HDLCDRV_HDLCBUFFER;
+	if (newp != hb->rd) { 
+		hb->buf[hb->wr] = val & 0xffff;
+		hb->wr = newp;
+	}
+	spin_unlock_irqrestore(&hb->lock, flags);
+}
+
+/* -------------------------------------------------------------------- */
+
+static inline void hdlcdrv_putbits(struct hdlcdrv_state *s, unsigned int bits)
+{
+	hdlcdrv_hbuf_put(&s->hdlcrx.hbuf, bits);
+}
+
+static inline unsigned int hdlcdrv_getbits(struct hdlcdrv_state *s)
+{
+	unsigned int ret;
+
+	if (hdlcdrv_hbuf_empty(&s->hdlctx.hbuf)) {
+		if (s->hdlctx.calibrate > 0)
+			s->hdlctx.calibrate--;
+		else
+			s->hdlctx.ptt = 0;
+		ret = 0;
+	} else 
+		ret = hdlcdrv_hbuf_get(&s->hdlctx.hbuf);
+#ifdef HDLCDRV_LOOPBACK
+	hdlcdrv_hbuf_put(&s->hdlcrx.hbuf, ret);
+#endif /* HDLCDRV_LOOPBACK */
+	return ret;
+}
+
+static inline void hdlcdrv_channelbit(struct hdlcdrv_state *s, unsigned int bit)
+{
+#ifdef HDLCDRV_DEBUG
+	hdlcdrv_add_bitbuffer(&s->bitbuf_channel, bit);
+#endif /* HDLCDRV_DEBUG */
+}
+
+static inline void hdlcdrv_setdcd(struct hdlcdrv_state *s, int dcd)
+{
+	s->hdlcrx.dcd = !!dcd;
+}
+
+static inline int hdlcdrv_ptt(struct hdlcdrv_state *s)
+{
+	return s->hdlctx.ptt || (s->hdlctx.calibrate > 0);
+}
+
+/* -------------------------------------------------------------------- */
+
+void hdlcdrv_receiver(struct net_device *, struct hdlcdrv_state *);
+void hdlcdrv_transmitter(struct net_device *, struct hdlcdrv_state *);
+void hdlcdrv_arbitrate(struct net_device *, struct hdlcdrv_state *);
+struct net_device *hdlcdrv_register(const struct hdlcdrv_ops *ops,
+				    unsigned int privsize, const char *ifname,
+				    unsigned int baseaddr, unsigned int irq, 
+				    unsigned int dma);
+void hdlcdrv_unregister(struct net_device *dev);
+
+/* -------------------------------------------------------------------- */
+
+
+
+#endif /* __KERNEL__ */
+
+/* -------------------------------------------------------------------- */
+
+#endif /* _HDLCDRV_H */
+
+/* -------------------------------------------------------------------- */
diff --git a/include/linux/hdreg.h b/include/linux/hdreg.h
new file mode 100644
index 00000000..29ee2873
--- /dev/null
+++ b/include/linux/hdreg.h
@@ -0,0 +1,658 @@
+#ifndef _LINUX_HDREG_H
+#define _LINUX_HDREG_H
+
+#include <linux/types.h>
+
+/*
+ * Command Header sizes for IOCTL commands
+ */
+
+#define HDIO_DRIVE_CMD_HDR_SIZE		(4 * sizeof(__u8))
+#define HDIO_DRIVE_HOB_HDR_SIZE		(8 * sizeof(__u8))
+#define HDIO_DRIVE_TASK_HDR_SIZE	(8 * sizeof(__u8))
+
+#define IDE_DRIVE_TASK_NO_DATA		0
+#ifndef __KERNEL__
+#define IDE_DRIVE_TASK_INVALID		-1
+#define IDE_DRIVE_TASK_SET_XFER		1
+#define IDE_DRIVE_TASK_IN		2
+#define IDE_DRIVE_TASK_OUT		3
+#endif
+#define IDE_DRIVE_TASK_RAW_WRITE	4
+
+/*
+ * Define standard taskfile in/out register
+ */
+#define IDE_TASKFILE_STD_IN_FLAGS	0xFE
+#define IDE_HOB_STD_IN_FLAGS		0x3C
+#ifndef __KERNEL__
+#define IDE_TASKFILE_STD_OUT_FLAGS	0xFE
+#define IDE_HOB_STD_OUT_FLAGS		0x3C
+
+typedef unsigned char task_ioreg_t;
+typedef unsigned long sata_ioreg_t;
+#endif
+
+typedef union ide_reg_valid_s {
+	unsigned all				: 16;
+	struct {
+		unsigned data			: 1;
+		unsigned error_feature		: 1;
+		unsigned sector			: 1;
+		unsigned nsector		: 1;
+		unsigned lcyl			: 1;
+		unsigned hcyl			: 1;
+		unsigned select			: 1;
+		unsigned status_command		: 1;
+
+		unsigned data_hob		: 1;
+		unsigned error_feature_hob	: 1;
+		unsigned sector_hob		: 1;
+		unsigned nsector_hob		: 1;
+		unsigned lcyl_hob		: 1;
+		unsigned hcyl_hob		: 1;
+		unsigned select_hob		: 1;
+		unsigned control_hob		: 1;
+	} b;
+} ide_reg_valid_t;
+
+typedef struct ide_task_request_s {
+	__u8		io_ports[8];
+	__u8		hob_ports[8]; /* bytes 6 and 7 are unused */
+	ide_reg_valid_t	out_flags;
+	ide_reg_valid_t	in_flags;
+	int		data_phase;
+	int		req_cmd;
+	unsigned long	out_size;
+	unsigned long	in_size;
+} ide_task_request_t;
+
+typedef struct ide_ioctl_request_s {
+	ide_task_request_t	*task_request;
+	unsigned char		*out_buffer;
+	unsigned char		*in_buffer;
+} ide_ioctl_request_t;
+
+struct hd_drive_cmd_hdr {
+	__u8 command;
+	__u8 sector_number;
+	__u8 feature;
+	__u8 sector_count;
+};
+
+#ifndef __KERNEL__
+typedef struct hd_drive_task_hdr {
+	__u8 data;
+	__u8 feature;
+	__u8 sector_count;
+	__u8 sector_number;
+	__u8 low_cylinder;
+	__u8 high_cylinder;
+	__u8 device_head;
+	__u8 command;
+} task_struct_t;
+
+typedef struct hd_drive_hob_hdr {
+	__u8 data;
+	__u8 feature;
+	__u8 sector_count;
+	__u8 sector_number;
+	__u8 low_cylinder;
+	__u8 high_cylinder;
+	__u8 device_head;
+	__u8 control;
+} hob_struct_t;
+#endif
+
+#define TASKFILE_NO_DATA		0x0000
+
+#define TASKFILE_IN			0x0001
+#define TASKFILE_MULTI_IN		0x0002
+
+#define TASKFILE_OUT			0x0004
+#define TASKFILE_MULTI_OUT		0x0008
+#define TASKFILE_IN_OUT			0x0010
+
+#define TASKFILE_IN_DMA			0x0020
+#define TASKFILE_OUT_DMA		0x0040
+#define TASKFILE_IN_DMAQ		0x0080
+#define TASKFILE_OUT_DMAQ		0x0100
+
+#ifndef __KERNEL__
+#define TASKFILE_P_IN			0x0200
+#define TASKFILE_P_OUT			0x0400
+#define TASKFILE_P_IN_DMA		0x0800
+#define TASKFILE_P_OUT_DMA		0x1000
+#define TASKFILE_P_IN_DMAQ		0x2000
+#define TASKFILE_P_OUT_DMAQ		0x4000
+#define TASKFILE_48			0x8000
+#define TASKFILE_INVALID		0x7fff
+#endif
+
+#ifndef __KERNEL__
+/* ATA/ATAPI Commands pre T13 Spec */
+#define WIN_NOP				0x00
+/*
+ *	0x01->0x02 Reserved
+ */
+#define CFA_REQ_EXT_ERROR_CODE		0x03 /* CFA Request Extended Error Code */
+/*
+ *	0x04->0x07 Reserved
+ */
+#define WIN_SRST			0x08 /* ATAPI soft reset command */
+#define WIN_DEVICE_RESET		0x08
+/*
+ *	0x09->0x0F Reserved
+ */
+#define WIN_RECAL			0x10
+#define WIN_RESTORE			WIN_RECAL
+/*
+ *	0x10->0x1F Reserved
+ */
+#define WIN_READ			0x20 /* 28-Bit */
+#define WIN_READ_ONCE			0x21 /* 28-Bit without retries */
+#define WIN_READ_LONG			0x22 /* 28-Bit */
+#define WIN_READ_LONG_ONCE		0x23 /* 28-Bit without retries */
+#define WIN_READ_EXT			0x24 /* 48-Bit */
+#define WIN_READDMA_EXT			0x25 /* 48-Bit */
+#define WIN_READDMA_QUEUED_EXT		0x26 /* 48-Bit */
+#define WIN_READ_NATIVE_MAX_EXT		0x27 /* 48-Bit */
+/*
+ *	0x28
+ */
+#define WIN_MULTREAD_EXT		0x29 /* 48-Bit */
+/*
+ *	0x2A->0x2F Reserved
+ */
+#define WIN_WRITE			0x30 /* 28-Bit */
+#define WIN_WRITE_ONCE			0x31 /* 28-Bit without retries */
+#define WIN_WRITE_LONG			0x32 /* 28-Bit */
+#define WIN_WRITE_LONG_ONCE		0x33 /* 28-Bit without retries */
+#define WIN_WRITE_EXT			0x34 /* 48-Bit */
+#define WIN_WRITEDMA_EXT		0x35 /* 48-Bit */
+#define WIN_WRITEDMA_QUEUED_EXT		0x36 /* 48-Bit */
+#define WIN_SET_MAX_EXT			0x37 /* 48-Bit */
+#define CFA_WRITE_SECT_WO_ERASE		0x38 /* CFA Write Sectors without erase */
+#define WIN_MULTWRITE_EXT		0x39 /* 48-Bit */
+/*
+ *	0x3A->0x3B Reserved
+ */
+#define WIN_WRITE_VERIFY		0x3C /* 28-Bit */
+/*
+ *	0x3D->0x3F Reserved
+ */
+#define WIN_VERIFY			0x40 /* 28-Bit - Read Verify Sectors */
+#define WIN_VERIFY_ONCE			0x41 /* 28-Bit - without retries */
+#define WIN_VERIFY_EXT			0x42 /* 48-Bit */
+/*
+ *	0x43->0x4F Reserved
+ */
+#define WIN_FORMAT			0x50
+/*
+ *	0x51->0x5F Reserved
+ */
+#define WIN_INIT			0x60
+/*
+ *	0x61->0x5F Reserved
+ */
+#define WIN_SEEK			0x70 /* 0x70-0x7F Reserved */
+
+#define CFA_TRANSLATE_SECTOR		0x87 /* CFA Translate Sector */
+#define WIN_DIAGNOSE			0x90
+#define WIN_SPECIFY			0x91 /* set drive geometry translation */
+#define WIN_DOWNLOAD_MICROCODE		0x92
+#define WIN_STANDBYNOW2			0x94
+#define WIN_STANDBY2			0x96
+#define WIN_SETIDLE2			0x97
+#define WIN_CHECKPOWERMODE2		0x98
+#define WIN_SLEEPNOW2			0x99
+/*
+ *	0x9A VENDOR
+ */
+#define WIN_PACKETCMD			0xA0 /* Send a packet command. */
+#define WIN_PIDENTIFY			0xA1 /* identify ATAPI device	*/
+#define WIN_QUEUED_SERVICE		0xA2
+#define WIN_SMART			0xB0 /* self-monitoring and reporting */
+#define CFA_ERASE_SECTORS		0xC0
+#define WIN_MULTREAD			0xC4 /* read sectors using multiple mode*/
+#define WIN_MULTWRITE			0xC5 /* write sectors using multiple mode */
+#define WIN_SETMULT			0xC6 /* enable/disable multiple mode */
+#define WIN_READDMA_QUEUED		0xC7 /* read sectors using Queued DMA transfers */
+#define WIN_READDMA			0xC8 /* read sectors using DMA transfers */
+#define WIN_READDMA_ONCE		0xC9 /* 28-Bit - without retries */
+#define WIN_WRITEDMA			0xCA /* write sectors using DMA transfers */
+#define WIN_WRITEDMA_ONCE		0xCB /* 28-Bit - without retries */
+#define WIN_WRITEDMA_QUEUED		0xCC /* write sectors using Queued DMA transfers */
+#define CFA_WRITE_MULTI_WO_ERASE	0xCD /* CFA Write multiple without erase */
+#define WIN_GETMEDIASTATUS		0xDA
+#define WIN_ACKMEDIACHANGE		0xDB /* ATA-1, ATA-2 vendor */
+#define WIN_POSTBOOT			0xDC
+#define WIN_PREBOOT 			0xDD
+#define WIN_DOORLOCK			0xDE /* lock door on removable drives */
+#define WIN_DOORUNLOCK			0xDF /* unlock door on removable drives */
+#define WIN_STANDBYNOW1			0xE0
+#define WIN_IDLEIMMEDIATE		0xE1 /* force drive to become "ready" */
+#define WIN_STANDBY			0xE2 /* Set device in Standby Mode */
+#define WIN_SETIDLE1			0xE3
+#define WIN_READ_BUFFER			0xE4 /* force read only 1 sector */
+#define WIN_CHECKPOWERMODE1		0xE5
+#define WIN_SLEEPNOW1			0xE6
+#define WIN_FLUSH_CACHE			0xE7
+#define WIN_WRITE_BUFFER		0xE8 /* force write only 1 sector */
+#define WIN_WRITE_SAME			0xE9 /* read ata-2 to use */
+	/* SET_FEATURES 0x22 or 0xDD */
+#define WIN_FLUSH_CACHE_EXT		0xEA /* 48-Bit */
+#define WIN_IDENTIFY			0xEC /* ask drive to identify itself	*/
+#define WIN_MEDIAEJECT			0xED
+#define WIN_IDENTIFY_DMA		0xEE /* same as WIN_IDENTIFY, but DMA */
+#define WIN_SETFEATURES			0xEF /* set special drive features */
+#define EXABYTE_ENABLE_NEST		0xF0
+#define WIN_SECURITY_SET_PASS		0xF1
+#define WIN_SECURITY_UNLOCK		0xF2
+#define WIN_SECURITY_ERASE_PREPARE	0xF3
+#define WIN_SECURITY_ERASE_UNIT		0xF4
+#define WIN_SECURITY_FREEZE_LOCK	0xF5
+#define WIN_SECURITY_DISABLE		0xF6
+#define WIN_READ_NATIVE_MAX		0xF8 /* return the native maximum address */
+#define WIN_SET_MAX			0xF9
+#define DISABLE_SEAGATE			0xFB
+
+/* WIN_SMART sub-commands */
+
+#define SMART_READ_VALUES		0xD0
+#define SMART_READ_THRESHOLDS		0xD1
+#define SMART_AUTOSAVE			0xD2
+#define SMART_SAVE			0xD3
+#define SMART_IMMEDIATE_OFFLINE		0xD4
+#define SMART_READ_LOG_SECTOR		0xD5
+#define SMART_WRITE_LOG_SECTOR		0xD6
+#define SMART_WRITE_THRESHOLDS		0xD7
+#define SMART_ENABLE			0xD8
+#define SMART_DISABLE			0xD9
+#define SMART_STATUS			0xDA
+#define SMART_AUTO_OFFLINE		0xDB
+
+/* Password used in TF4 & TF5 executing SMART commands */
+
+#define SMART_LCYL_PASS			0x4F
+#define SMART_HCYL_PASS			0xC2
+
+/* WIN_SETFEATURES sub-commands */
+#define SETFEATURES_EN_8BIT	0x01	/* Enable 8-Bit Transfers */
+#define SETFEATURES_EN_WCACHE	0x02	/* Enable write cache */
+#define SETFEATURES_DIS_DEFECT	0x04	/* Disable Defect Management */
+#define SETFEATURES_EN_APM	0x05	/* Enable advanced power management */
+#define SETFEATURES_EN_SAME_R	0x22	/* for a region ATA-1 */
+#define SETFEATURES_DIS_MSN	0x31	/* Disable Media Status Notification */
+#define SETFEATURES_DIS_RETRY	0x33	/* Disable Retry */
+#define SETFEATURES_EN_AAM	0x42	/* Enable Automatic Acoustic Management */
+#define SETFEATURES_RW_LONG	0x44	/* Set Length of VS bytes */
+#define SETFEATURES_SET_CACHE	0x54	/* Set Cache segments to SC Reg. Val */
+#define SETFEATURES_DIS_RLA	0x55	/* Disable read look-ahead feature */
+#define SETFEATURES_EN_RI	0x5D	/* Enable release interrupt */
+#define SETFEATURES_EN_SI	0x5E	/* Enable SERVICE interrupt */
+#define SETFEATURES_DIS_RPOD	0x66	/* Disable reverting to power on defaults */
+#define SETFEATURES_DIS_ECC	0x77	/* Disable ECC byte count */
+#define SETFEATURES_DIS_8BIT	0x81	/* Disable 8-Bit Transfers */
+#define SETFEATURES_DIS_WCACHE	0x82	/* Disable write cache */
+#define SETFEATURES_EN_DEFECT	0x84	/* Enable Defect Management */
+#define SETFEATURES_DIS_APM	0x85	/* Disable advanced power management */
+#define SETFEATURES_EN_ECC	0x88	/* Enable ECC byte count */
+#define SETFEATURES_EN_MSN	0x95	/* Enable Media Status Notification */
+#define SETFEATURES_EN_RETRY	0x99	/* Enable Retry */
+#define SETFEATURES_EN_RLA	0xAA	/* Enable read look-ahead feature */
+#define SETFEATURES_PREFETCH	0xAB	/* Sets drive prefetch value */
+#define SETFEATURES_EN_REST	0xAC	/* ATA-1 */
+#define SETFEATURES_4B_RW_LONG	0xBB	/* Set Length of 4 bytes */
+#define SETFEATURES_DIS_AAM	0xC2	/* Disable Automatic Acoustic Management */
+#define SETFEATURES_EN_RPOD	0xCC	/* Enable reverting to power on defaults */
+#define SETFEATURES_DIS_RI	0xDD	/* Disable release interrupt ATAPI */
+#define SETFEATURES_EN_SAME_M	0xDD	/* for a entire device ATA-1 */
+#define SETFEATURES_DIS_SI	0xDE	/* Disable SERVICE interrupt ATAPI */
+
+/* WIN_SECURITY sub-commands */
+
+#define SECURITY_SET_PASSWORD		0xBA
+#define SECURITY_UNLOCK			0xBB
+#define SECURITY_ERASE_PREPARE		0xBC
+#define SECURITY_ERASE_UNIT		0xBD
+#define SECURITY_FREEZE_LOCK		0xBE
+#define SECURITY_DISABLE_PASSWORD	0xBF
+#endif /* __KERNEL__ */
+
+struct hd_geometry {
+      unsigned char heads;
+      unsigned char sectors;
+      unsigned short cylinders;
+      unsigned long start;
+};
+
+/* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x030n/0x031n */
+#define HDIO_GETGEO		0x0301	/* get device geometry */
+#define HDIO_GET_UNMASKINTR	0x0302	/* get current unmask setting */
+#define HDIO_GET_MULTCOUNT	0x0304	/* get current IDE blockmode setting */
+#define HDIO_GET_QDMA		0x0305	/* get use-qdma flag */
+
+#define HDIO_SET_XFER		0x0306  /* set transfer rate via proc */
+
+#define HDIO_OBSOLETE_IDENTITY	0x0307	/* OBSOLETE, DO NOT USE: returns 142 bytes */
+#define HDIO_GET_KEEPSETTINGS	0x0308	/* get keep-settings-on-reset flag */
+#define HDIO_GET_32BIT		0x0309	/* get current io_32bit setting */
+#define HDIO_GET_NOWERR		0x030a	/* get ignore-write-error flag */
+#define HDIO_GET_DMA		0x030b	/* get use-dma flag */
+#define HDIO_GET_NICE		0x030c	/* get nice flags */
+#define HDIO_GET_IDENTITY	0x030d	/* get IDE identification info */
+#define HDIO_GET_WCACHE		0x030e	/* get write cache mode on|off */
+#define HDIO_GET_ACOUSTIC	0x030f	/* get acoustic value */
+#define	HDIO_GET_ADDRESS	0x0310	/* */
+
+#define HDIO_GET_BUSSTATE	0x031a	/* get the bus state of the hwif */
+#define HDIO_TRISTATE_HWIF	0x031b	/* execute a channel tristate */
+#define HDIO_DRIVE_RESET	0x031c	/* execute a device reset */
+#define HDIO_DRIVE_TASKFILE	0x031d	/* execute raw taskfile */
+#define HDIO_DRIVE_TASK		0x031e	/* execute task and special drive command */
+#define HDIO_DRIVE_CMD		0x031f	/* execute a special drive command */
+#define HDIO_DRIVE_CMD_AEB	HDIO_DRIVE_TASK
+
+/* hd/ide ctl's that pass (arg) non-ptr values are numbered 0x032n/0x033n */
+#define HDIO_SET_MULTCOUNT	0x0321	/* change IDE blockmode */
+#define HDIO_SET_UNMASKINTR	0x0322	/* permit other irqs during I/O */
+#define HDIO_SET_KEEPSETTINGS	0x0323	/* keep ioctl settings on reset */
+#define HDIO_SET_32BIT		0x0324	/* change io_32bit flags */
+#define HDIO_SET_NOWERR		0x0325	/* change ignore-write-error flag */
+#define HDIO_SET_DMA		0x0326	/* change use-dma flag */
+#define HDIO_SET_PIO_MODE	0x0327	/* reconfig interface to new speed */
+#ifndef __KERNEL__
+#define HDIO_SCAN_HWIF		0x0328	/* register and (re)scan interface */
+#define HDIO_UNREGISTER_HWIF	0x032a  /* unregister interface */
+#endif
+#define HDIO_SET_NICE		0x0329	/* set nice flags */
+#define HDIO_SET_WCACHE		0x032b	/* change write cache enable-disable */
+#define HDIO_SET_ACOUSTIC	0x032c	/* change acoustic behavior */
+#define HDIO_SET_BUSSTATE	0x032d	/* set the bus state of the hwif */
+#define HDIO_SET_QDMA		0x032e	/* change use-qdma flag */
+#define HDIO_SET_ADDRESS	0x032f	/* change lba addressing modes */
+
+/* bus states */
+enum {
+	BUSSTATE_OFF = 0,
+	BUSSTATE_ON,
+	BUSSTATE_TRISTATE
+};
+
+/* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x033n/0x033n */
+/* 0x330 is reserved - used to be HDIO_GETGEO_BIG */
+/* 0x331 is reserved - used to be HDIO_GETGEO_BIG_RAW */
+/* 0x338 is reserved - used to be HDIO_SET_IDE_SCSI */
+/* 0x339 is reserved - used to be HDIO_SET_SCSI_IDE */
+
+#define __NEW_HD_DRIVE_ID
+
+#ifndef __KERNEL__
+/*
+ * Structure returned by HDIO_GET_IDENTITY, as per ANSI NCITS ATA6 rev.1b spec.
+ *
+ * If you change something here, please remember to update fix_driveid() in
+ * ide/probe.c.
+ */
+struct hd_driveid {
+	unsigned short	config;		/* lots of obsolete bit flags */
+	unsigned short	cyls;		/* Obsolete, "physical" cyls */
+	unsigned short	reserved2;	/* reserved (word 2) */
+	unsigned short	heads;		/* Obsolete, "physical" heads */
+	unsigned short	track_bytes;	/* unformatted bytes per track */
+	unsigned short	sector_bytes;	/* unformatted bytes per sector */
+	unsigned short	sectors;	/* Obsolete, "physical" sectors per track */
+	unsigned short	vendor0;	/* vendor unique */
+	unsigned short	vendor1;	/* vendor unique */
+	unsigned short	vendor2;	/* Retired vendor unique */
+	unsigned char	serial_no[20];	/* 0 = not_specified */
+	unsigned short	buf_type;	/* Retired */
+	unsigned short	buf_size;	/* Retired, 512 byte increments
+					 * 0 = not_specified
+					 */
+	unsigned short	ecc_bytes;	/* for r/w long cmds; 0 = not_specified */
+	unsigned char	fw_rev[8];	/* 0 = not_specified */
+	unsigned char	model[40];	/* 0 = not_specified */
+	unsigned char	max_multsect;	/* 0=not_implemented */
+	unsigned char	vendor3;	/* vendor unique */
+	unsigned short	dword_io;	/* 0=not_implemented; 1=implemented */
+	unsigned char	vendor4;	/* vendor unique */
+	unsigned char	capability;	/* (upper byte of word 49)
+					 *  3:	IORDYsup
+					 *  2:	IORDYsw
+					 *  1:	LBA
+					 *  0:	DMA
+					 */
+	unsigned short	reserved50;	/* reserved (word 50) */
+	unsigned char	vendor5;	/* Obsolete, vendor unique */
+	unsigned char	tPIO;		/* Obsolete, 0=slow, 1=medium, 2=fast */
+	unsigned char	vendor6;	/* Obsolete, vendor unique */
+	unsigned char	tDMA;		/* Obsolete, 0=slow, 1=medium, 2=fast */
+	unsigned short	field_valid;	/* (word 53)
+					 *  2:	ultra_ok	word  88
+					 *  1:	eide_ok		words 64-70
+					 *  0:	cur_ok		words 54-58
+					 */
+	unsigned short	cur_cyls;	/* Obsolete, logical cylinders */
+	unsigned short	cur_heads;	/* Obsolete, l heads */
+	unsigned short	cur_sectors;	/* Obsolete, l sectors per track */
+	unsigned short	cur_capacity0;	/* Obsolete, l total sectors on drive */
+	unsigned short	cur_capacity1;	/* Obsolete, (2 words, misaligned int)     */
+	unsigned char	multsect;	/* current multiple sector count */
+	unsigned char	multsect_valid;	/* when (bit0==1) multsect is ok */
+	unsigned int	lba_capacity;	/* Obsolete, total number of sectors */
+	unsigned short	dma_1word;	/* Obsolete, single-word dma info */
+	unsigned short	dma_mword;	/* multiple-word dma info */
+	unsigned short  eide_pio_modes; /* bits 0:mode3 1:mode4 */
+	unsigned short  eide_dma_min;	/* min mword dma cycle time (ns) */
+	unsigned short  eide_dma_time;	/* recommended mword dma cycle time (ns) */
+	unsigned short  eide_pio;       /* min cycle time (ns), no IORDY  */
+	unsigned short  eide_pio_iordy; /* min cycle time (ns), with IORDY */
+	unsigned short	words69_70[2];	/* reserved words 69-70
+					 * future command overlap and queuing
+					 */
+	unsigned short	words71_74[4];	/* reserved words 71-74
+					 * for IDENTIFY PACKET DEVICE command
+					 */
+	unsigned short  queue_depth;	/* (word 75)
+					 * 15:5	reserved
+					 *  4:0	Maximum queue depth -1
+					 */
+	unsigned short  words76_79[4];	/* reserved words 76-79 */
+	unsigned short  major_rev_num;	/* (word 80) */
+	unsigned short  minor_rev_num;	/* (word 81) */
+	unsigned short  command_set_1;	/* (word 82) supported
+					 * 15:	Obsolete
+					 * 14:	NOP command
+					 * 13:	READ_BUFFER
+					 * 12:	WRITE_BUFFER
+					 * 11:	Obsolete
+					 * 10:	Host Protected Area
+					 *  9:	DEVICE Reset
+					 *  8:	SERVICE Interrupt
+					 *  7:	Release Interrupt
+					 *  6:	look-ahead
+					 *  5:	write cache
+					 *  4:	PACKET Command
+					 *  3:	Power Management Feature Set
+					 *  2:	Removable Feature Set
+					 *  1:	Security Feature Set
+					 *  0:	SMART Feature Set
+					 */
+	unsigned short  command_set_2;	/* (word 83)
+					 * 15:	Shall be ZERO
+					 * 14:	Shall be ONE
+					 * 13:	FLUSH CACHE EXT
+					 * 12:	FLUSH CACHE
+					 * 11:	Device Configuration Overlay
+					 * 10:	48-bit Address Feature Set
+					 *  9:	Automatic Acoustic Management
+					 *  8:	SET MAX security
+					 *  7:	reserved 1407DT PARTIES
+					 *  6:	SetF sub-command Power-Up
+					 *  5:	Power-Up in Standby Feature Set
+					 *  4:	Removable Media Notification
+					 *  3:	APM Feature Set
+					 *  2:	CFA Feature Set
+					 *  1:	READ/WRITE DMA QUEUED
+					 *  0:	Download MicroCode
+					 */
+	unsigned short  cfsse;		/* (word 84)
+					 * cmd set-feature supported extensions
+					 * 15:	Shall be ZERO
+					 * 14:	Shall be ONE
+					 * 13:6	reserved
+					 *  5:	General Purpose Logging
+					 *  4:	Streaming Feature Set
+					 *  3:	Media Card Pass Through
+					 *  2:	Media Serial Number Valid
+					 *  1:	SMART selt-test supported
+					 *  0:	SMART error logging
+					 */
+	unsigned short  cfs_enable_1;	/* (word 85)
+					 * command set-feature enabled
+					 * 15:	Obsolete
+					 * 14:	NOP command
+					 * 13:	READ_BUFFER
+					 * 12:	WRITE_BUFFER
+					 * 11:	Obsolete
+					 * 10:	Host Protected Area
+					 *  9:	DEVICE Reset
+					 *  8:	SERVICE Interrupt
+					 *  7:	Release Interrupt
+					 *  6:	look-ahead
+					 *  5:	write cache
+					 *  4:	PACKET Command
+					 *  3:	Power Management Feature Set
+					 *  2:	Removable Feature Set
+					 *  1:	Security Feature Set
+					 *  0:	SMART Feature Set
+					 */
+	unsigned short  cfs_enable_2;	/* (word 86)
+					 * command set-feature enabled
+					 * 15:	Shall be ZERO
+					 * 14:	Shall be ONE
+					 * 13:	FLUSH CACHE EXT
+					 * 12:	FLUSH CACHE
+					 * 11:	Device Configuration Overlay
+					 * 10:	48-bit Address Feature Set
+					 *  9:	Automatic Acoustic Management
+					 *  8:	SET MAX security
+					 *  7:	reserved 1407DT PARTIES
+					 *  6:	SetF sub-command Power-Up
+					 *  5:	Power-Up in Standby Feature Set
+					 *  4:	Removable Media Notification
+					 *  3:	APM Feature Set
+					 *  2:	CFA Feature Set
+					 *  1:	READ/WRITE DMA QUEUED
+					 *  0:	Download MicroCode
+					 */
+	unsigned short  csf_default;	/* (word 87)
+					 * command set-feature default
+					 * 15:	Shall be ZERO
+					 * 14:	Shall be ONE
+					 * 13:6	reserved
+					 *  5:	General Purpose Logging enabled
+					 *  4:	Valid CONFIGURE STREAM executed
+					 *  3:	Media Card Pass Through enabled
+					 *  2:	Media Serial Number Valid
+					 *  1:	SMART selt-test supported
+					 *  0:	SMART error logging
+					 */
+	unsigned short  dma_ultra;	/* (word 88) */
+	unsigned short	trseuc;		/* time required for security erase */
+	unsigned short	trsEuc;		/* time required for enhanced erase */
+	unsigned short	CurAPMvalues;	/* current APM values */
+	unsigned short	mprc;		/* master password revision code */
+	unsigned short	hw_config;	/* hardware config (word 93)
+					 * 15:	Shall be ZERO
+					 * 14:	Shall be ONE
+					 * 13:
+					 * 12:
+					 * 11:
+					 * 10:
+					 *  9:
+					 *  8:
+					 *  7:
+					 *  6:
+					 *  5:
+					 *  4:
+					 *  3:
+					 *  2:
+					 *  1:
+					 *  0:	Shall be ONE
+					 */
+	unsigned short	acoustic;	/* (word 94)
+					 * 15:8	Vendor's recommended value
+					 *  7:0	current value
+					 */
+	unsigned short	msrqs;		/* min stream request size */
+	unsigned short	sxfert;		/* stream transfer time */
+	unsigned short	sal;		/* stream access latency */
+	unsigned int	spg;		/* stream performance granularity */
+	unsigned long long lba_capacity_2;/* 48-bit total number of sectors */
+	unsigned short	words104_125[22];/* reserved words 104-125 */
+	unsigned short	last_lun;	/* (word 126) */
+	unsigned short	word127;	/* (word 127) Feature Set
+					 * Removable Media Notification
+					 * 15:2	reserved
+					 *  1:0	00 = not supported
+					 *	01 = supported
+					 *	10 = reserved
+					 *	11 = reserved
+					 */
+	unsigned short	dlf;		/* (word 128)
+					 * device lock function
+					 * 15:9	reserved
+					 *  8	security level 1:max 0:high
+					 *  7:6	reserved
+					 *  5	enhanced erase
+					 *  4	expire
+					 *  3	frozen
+					 *  2	locked
+					 *  1	en/disabled
+					 *  0	capability
+					 */
+	unsigned short  csfo;		/*  (word 129)
+					 * current set features options
+					 * 15:4	reserved
+					 *  3:	auto reassign
+					 *  2:	reverting
+					 *  1:	read-look-ahead
+					 *  0:	write cache
+					 */
+	unsigned short	words130_155[26];/* reserved vendor words 130-155 */
+	unsigned short	word156;	/* reserved vendor word 156 */
+	unsigned short	words157_159[3];/* reserved vendor words 157-159 */
+	unsigned short	cfa_power;	/* (word 160) CFA Power Mode
+					 * 15 word 160 supported
+					 * 14 reserved
+					 * 13
+					 * 12
+					 * 11:0
+					 */
+	unsigned short	words161_175[15];/* Reserved for CFA */
+	unsigned short	words176_205[30];/* Current Media Serial Number */
+	unsigned short	words206_254[49];/* reserved words 206-254 */
+	unsigned short	integrity_word;	/* (word 255)
+					 * 15:8 Checksum
+					 *  7:0 Signature
+					 */
+};
+#endif /* __KERNEL__ */
+
+/*
+ * IDE "nice" flags. These are used on a per drive basis to determine
+ * when to be nice and give more bandwidth to the other devices which
+ * share the same IDE bus.
+ */
+#define IDE_NICE_DSC_OVERLAP	(0)	/* per the DSC overlap protocol */
+#define IDE_NICE_ATAPI_OVERLAP	(1)	/* not supported yet */
+#define IDE_NICE_1		(3)	/* when probably won't affect us much */
+#ifndef __KERNEL__
+#define IDE_NICE_0		(2)	/* when sure that it won't affect us */
+#define IDE_NICE_2		(4)	/* when we know it's on our expense */
+#endif
+
+#endif	/* _LINUX_HDREG_H */
diff --git a/include/linux/hid-debug.h b/include/linux/hid-debug.h
new file mode 100644
index 00000000..53744fa1
--- /dev/null
+++ b/include/linux/hid-debug.h
@@ -0,0 +1,65 @@
+#ifndef __HID_DEBUG_H
+#define __HID_DEBUG_H
+
+/*
+ *  Copyright (c) 2007-2009	Jiri Kosina
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#define HID_DEBUG_BUFSIZE 512
+
+#ifdef CONFIG_DEBUG_FS
+
+void hid_dump_input(struct hid_device *, struct hid_usage *, __s32);
+void hid_dump_device(struct hid_device *, struct seq_file *);
+void hid_dump_field(struct hid_field *, int, struct seq_file *);
+char *hid_resolv_usage(unsigned, struct seq_file *);
+void hid_debug_register(struct hid_device *, const char *);
+void hid_debug_unregister(struct hid_device *);
+void hid_debug_init(void);
+void hid_debug_exit(void);
+void hid_debug_event(struct hid_device *, char *);
+
+
+struct hid_debug_list {
+	char *hid_debug_buf;
+	int head;
+	int tail;
+	struct fasync_struct *fasync;
+	struct hid_device *hdev;
+	struct list_head node;
+	struct mutex read_mutex;
+};
+
+#else
+
+#define hid_dump_input(a,b,c)		do { } while (0)
+#define hid_dump_device(a,b)		do { } while (0)
+#define hid_dump_field(a,b,c)		do { } while (0)
+#define hid_resolv_usage(a,b)		do { } while (0)
+#define hid_debug_register(a, b)	do { } while (0)
+#define hid_debug_unregister(a)		do { } while (0)
+#define hid_debug_init()		do { } while (0)
+#define hid_debug_exit()		do { } while (0)
+#define hid_debug_event(a,b)		do { } while (0)
+
+#endif
+
+#endif
+
diff --git a/include/linux/hid-roccat.h b/include/linux/hid-roccat.h
new file mode 100644
index 00000000..24e1ca01
--- /dev/null
+++ b/include/linux/hid-roccat.h
@@ -0,0 +1,29 @@
+#ifndef __HID_ROCCAT_H
+#define __HID_ROCCAT_H
+
+/*
+ * Copyright (c) 2010 Stefan Achatz <erazor_de@users.sourceforge.net>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/hid.h>
+#include <linux/types.h>
+
+#define ROCCATIOCGREPSIZE _IOR('H', 0xf1, int)
+
+#ifdef __KERNEL__
+
+int roccat_connect(struct class *klass, struct hid_device *hid,
+		int report_size);
+void roccat_disconnect(int minor);
+int roccat_report_event(int minor, u8 const *data);
+
+#endif
+
+#endif
diff --git a/include/linux/hid.h b/include/linux/hid.h
new file mode 100644
index 00000000..773b4acf
--- /dev/null
+++ b/include/linux/hid.h
@@ -0,0 +1,949 @@
+#ifndef __HID_H
+#define __HID_H
+
+/*
+ *  Copyright (c) 1999 Andreas Gal
+ *  Copyright (c) 2000-2001 Vojtech Pavlik
+ *  Copyright (c) 2006-2007 Jiri Kosina
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+/*
+ * USB HID (Human Interface Device) interface class code
+ */
+
+#define USB_INTERFACE_CLASS_HID		3
+
+/*
+ * USB HID interface subclass and protocol codes
+ */
+
+#define USB_INTERFACE_SUBCLASS_BOOT	1
+#define USB_INTERFACE_PROTOCOL_KEYBOARD	1
+#define USB_INTERFACE_PROTOCOL_MOUSE	2
+
+/*
+ * HID class requests
+ */
+
+#define HID_REQ_GET_REPORT		0x01
+#define HID_REQ_GET_IDLE		0x02
+#define HID_REQ_GET_PROTOCOL		0x03
+#define HID_REQ_SET_REPORT		0x09
+#define HID_REQ_SET_IDLE		0x0A
+#define HID_REQ_SET_PROTOCOL		0x0B
+
+/*
+ * HID class descriptor types
+ */
+
+#define HID_DT_HID			(USB_TYPE_CLASS | 0x01)
+#define HID_DT_REPORT			(USB_TYPE_CLASS | 0x02)
+#define HID_DT_PHYSICAL			(USB_TYPE_CLASS | 0x03)
+
+#define HID_MAX_DESCRIPTOR_SIZE		4096
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/mod_devicetable.h> /* hid_device_id */
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <linux/input.h>
+#include <linux/semaphore.h>
+#include <linux/power_supply.h>
+
+/*
+ * We parse each description item into this structure. Short items data
+ * values are expanded to 32-bit signed int, long items contain a pointer
+ * into the data area.
+ */
+
+struct hid_item {
+	unsigned  format;
+	__u8      size;
+	__u8      type;
+	__u8      tag;
+	union {
+	    __u8   u8;
+	    __s8   s8;
+	    __u16  u16;
+	    __s16  s16;
+	    __u32  u32;
+	    __s32  s32;
+	    __u8  *longdata;
+	} data;
+};
+
+/*
+ * HID report item format
+ */
+
+#define HID_ITEM_FORMAT_SHORT	0
+#define HID_ITEM_FORMAT_LONG	1
+
+/*
+ * Special tag indicating long items
+ */
+
+#define HID_ITEM_TAG_LONG	15
+
+/*
+ * HID report descriptor item type (prefix bit 2,3)
+ */
+
+#define HID_ITEM_TYPE_MAIN		0
+#define HID_ITEM_TYPE_GLOBAL		1
+#define HID_ITEM_TYPE_LOCAL		2
+#define HID_ITEM_TYPE_RESERVED		3
+
+/*
+ * HID report descriptor main item tags
+ */
+
+#define HID_MAIN_ITEM_TAG_INPUT			8
+#define HID_MAIN_ITEM_TAG_OUTPUT		9
+#define HID_MAIN_ITEM_TAG_FEATURE		11
+#define HID_MAIN_ITEM_TAG_BEGIN_COLLECTION	10
+#define HID_MAIN_ITEM_TAG_END_COLLECTION	12
+
+/*
+ * HID report descriptor main item contents
+ */
+
+#define HID_MAIN_ITEM_CONSTANT		0x001
+#define HID_MAIN_ITEM_VARIABLE		0x002
+#define HID_MAIN_ITEM_RELATIVE		0x004
+#define HID_MAIN_ITEM_WRAP		0x008
+#define HID_MAIN_ITEM_NONLINEAR		0x010
+#define HID_MAIN_ITEM_NO_PREFERRED	0x020
+#define HID_MAIN_ITEM_NULL_STATE	0x040
+#define HID_MAIN_ITEM_VOLATILE		0x080
+#define HID_MAIN_ITEM_BUFFERED_BYTE	0x100
+
+/*
+ * HID report descriptor collection item types
+ */
+
+#define HID_COLLECTION_PHYSICAL		0
+#define HID_COLLECTION_APPLICATION	1
+#define HID_COLLECTION_LOGICAL		2
+
+/*
+ * HID report descriptor global item tags
+ */
+
+#define HID_GLOBAL_ITEM_TAG_USAGE_PAGE		0
+#define HID_GLOBAL_ITEM_TAG_LOGICAL_MINIMUM	1
+#define HID_GLOBAL_ITEM_TAG_LOGICAL_MAXIMUM	2
+#define HID_GLOBAL_ITEM_TAG_PHYSICAL_MINIMUM	3
+#define HID_GLOBAL_ITEM_TAG_PHYSICAL_MAXIMUM	4
+#define HID_GLOBAL_ITEM_TAG_UNIT_EXPONENT	5
+#define HID_GLOBAL_ITEM_TAG_UNIT		6
+#define HID_GLOBAL_ITEM_TAG_REPORT_SIZE		7
+#define HID_GLOBAL_ITEM_TAG_REPORT_ID		8
+#define HID_GLOBAL_ITEM_TAG_REPORT_COUNT	9
+#define HID_GLOBAL_ITEM_TAG_PUSH		10
+#define HID_GLOBAL_ITEM_TAG_POP			11
+
+/*
+ * HID report descriptor local item tags
+ */
+
+#define HID_LOCAL_ITEM_TAG_USAGE		0
+#define HID_LOCAL_ITEM_TAG_USAGE_MINIMUM	1
+#define HID_LOCAL_ITEM_TAG_USAGE_MAXIMUM	2
+#define HID_LOCAL_ITEM_TAG_DESIGNATOR_INDEX	3
+#define HID_LOCAL_ITEM_TAG_DESIGNATOR_MINIMUM	4
+#define HID_LOCAL_ITEM_TAG_DESIGNATOR_MAXIMUM	5
+#define HID_LOCAL_ITEM_TAG_STRING_INDEX		7
+#define HID_LOCAL_ITEM_TAG_STRING_MINIMUM	8
+#define HID_LOCAL_ITEM_TAG_STRING_MAXIMUM	9
+#define HID_LOCAL_ITEM_TAG_DELIMITER		10
+
+/*
+ * HID usage tables
+ */
+
+#define HID_USAGE_PAGE		0xffff0000
+
+#define HID_UP_UNDEFINED	0x00000000
+#define HID_UP_GENDESK		0x00010000
+#define HID_UP_SIMULATION	0x00020000
+#define HID_UP_GENDEVCTRLS	0x00060000
+#define HID_UP_KEYBOARD		0x00070000
+#define HID_UP_LED		0x00080000
+#define HID_UP_BUTTON		0x00090000
+#define HID_UP_ORDINAL		0x000a0000
+#define HID_UP_CONSUMER		0x000c0000
+#define HID_UP_DIGITIZER	0x000d0000
+#define HID_UP_PID		0x000f0000
+#define HID_UP_HPVENDOR         0xff7f0000
+#define HID_UP_MSVENDOR		0xff000000
+#define HID_UP_CUSTOM		0x00ff0000
+#define HID_UP_LOGIVENDOR	0xffbc0000
+
+#define HID_USAGE		0x0000ffff
+
+#define HID_GD_POINTER		0x00010001
+#define HID_GD_MOUSE		0x00010002
+#define HID_GD_JOYSTICK		0x00010004
+#define HID_GD_GAMEPAD		0x00010005
+#define HID_GD_KEYBOARD		0x00010006
+#define HID_GD_KEYPAD		0x00010007
+#define HID_GD_MULTIAXIS	0x00010008
+#define HID_GD_X		0x00010030
+#define HID_GD_Y		0x00010031
+#define HID_GD_Z		0x00010032
+#define HID_GD_RX		0x00010033
+#define HID_GD_RY		0x00010034
+#define HID_GD_RZ		0x00010035
+#define HID_GD_SLIDER		0x00010036
+#define HID_GD_DIAL		0x00010037
+#define HID_GD_WHEEL		0x00010038
+#define HID_GD_HATSWITCH	0x00010039
+#define HID_GD_BUFFER		0x0001003a
+#define HID_GD_BYTECOUNT	0x0001003b
+#define HID_GD_MOTION		0x0001003c
+#define HID_GD_START		0x0001003d
+#define HID_GD_SELECT		0x0001003e
+#define HID_GD_VX		0x00010040
+#define HID_GD_VY		0x00010041
+#define HID_GD_VZ		0x00010042
+#define HID_GD_VBRX		0x00010043
+#define HID_GD_VBRY		0x00010044
+#define HID_GD_VBRZ		0x00010045
+#define HID_GD_VNO		0x00010046
+#define HID_GD_FEATURE		0x00010047
+#define HID_GD_UP		0x00010090
+#define HID_GD_DOWN		0x00010091
+#define HID_GD_RIGHT		0x00010092
+#define HID_GD_LEFT		0x00010093
+
+#define HID_DC_BATTERYSTRENGTH	0x00060020
+
+#define HID_DG_DIGITIZER	0x000d0001
+#define HID_DG_PEN		0x000d0002
+#define HID_DG_LIGHTPEN		0x000d0003
+#define HID_DG_TOUCHSCREEN	0x000d0004
+#define HID_DG_TOUCHPAD		0x000d0005
+#define HID_DG_STYLUS		0x000d0020
+#define HID_DG_PUCK		0x000d0021
+#define HID_DG_FINGER		0x000d0022
+#define HID_DG_TIPPRESSURE	0x000d0030
+#define HID_DG_BARRELPRESSURE	0x000d0031
+#define HID_DG_INRANGE		0x000d0032
+#define HID_DG_TOUCH		0x000d0033
+#define HID_DG_UNTOUCH		0x000d0034
+#define HID_DG_TAP		0x000d0035
+#define HID_DG_TABLETFUNCTIONKEY	0x000d0039
+#define HID_DG_PROGRAMCHANGEKEY	0x000d003a
+#define HID_DG_INVERT		0x000d003c
+#define HID_DG_TIPSWITCH	0x000d0042
+#define HID_DG_TIPSWITCH2	0x000d0043
+#define HID_DG_BARRELSWITCH	0x000d0044
+#define HID_DG_ERASER		0x000d0045
+#define HID_DG_TABLETPICK	0x000d0046
+/*
+ * as of May 20, 2009 the usages below are not yet in the official USB spec
+ * but are being pushed by Microsft as described in their paper "Digitizer
+ * Drivers for Windows Touch and Pen-Based Computers"
+ */
+#define HID_DG_CONFIDENCE	0x000d0047
+#define HID_DG_WIDTH		0x000d0048
+#define HID_DG_HEIGHT		0x000d0049
+#define HID_DG_CONTACTID	0x000d0051
+#define HID_DG_INPUTMODE	0x000d0052
+#define HID_DG_DEVICEINDEX	0x000d0053
+#define HID_DG_CONTACTCOUNT	0x000d0054
+#define HID_DG_CONTACTMAX	0x000d0055
+
+/*
+ * HID report types --- Ouch! HID spec says 1 2 3!
+ */
+
+#define HID_INPUT_REPORT	0
+#define HID_OUTPUT_REPORT	1
+#define HID_FEATURE_REPORT	2
+
+/*
+ * HID connect requests
+ */
+
+#define HID_CONNECT_HIDINPUT		0x01
+#define HID_CONNECT_HIDINPUT_FORCE	0x02
+#define HID_CONNECT_HIDRAW		0x04
+#define HID_CONNECT_HIDDEV		0x08
+#define HID_CONNECT_HIDDEV_FORCE	0x10
+#define HID_CONNECT_FF			0x20
+#define HID_CONNECT_DEFAULT	(HID_CONNECT_HIDINPUT|HID_CONNECT_HIDRAW| \
+		HID_CONNECT_HIDDEV|HID_CONNECT_FF)
+
+/*
+ * HID device quirks.
+ */
+
+/* 
+ * Increase this if you need to configure more HID quirks at module load time
+ */
+#define MAX_USBHID_BOOT_QUIRKS 4
+
+#define HID_QUIRK_INVERT			0x00000001
+#define HID_QUIRK_NOTOUCH			0x00000002
+#define HID_QUIRK_IGNORE			0x00000004
+#define HID_QUIRK_NOGET				0x00000008
+#define HID_QUIRK_HIDDEV_FORCE			0x00000010
+#define HID_QUIRK_BADPAD			0x00000020
+#define HID_QUIRK_MULTI_INPUT			0x00000040
+#define HID_QUIRK_HIDINPUT_FORCE		0x00000080
+#define HID_QUIRK_MULTITOUCH			0x00000100
+#define HID_QUIRK_SKIP_OUTPUT_REPORTS		0x00010000
+#define HID_QUIRK_FULLSPEED_INTERVAL		0x10000000
+#define HID_QUIRK_NO_INIT_REPORTS		0x20000000
+#define HID_QUIRK_NO_IGNORE			0x40000000
+#define HID_QUIRK_NO_INPUT_SYNC			0x80000000
+
+/*
+ * This is the global environment of the parser. This information is
+ * persistent for main-items. The global environment can be saved and
+ * restored with PUSH/POP statements.
+ */
+
+struct hid_global {
+	unsigned usage_page;
+	__s32    logical_minimum;
+	__s32    logical_maximum;
+	__s32    physical_minimum;
+	__s32    physical_maximum;
+	__s32    unit_exponent;
+	unsigned unit;
+	unsigned report_id;
+	unsigned report_size;
+	unsigned report_count;
+};
+
+/*
+ * This is the local environment. It is persistent up the next main-item.
+ */
+
+#define HID_MAX_USAGES			12288
+#define HID_DEFAULT_NUM_COLLECTIONS	16
+
+struct hid_local {
+	unsigned usage[HID_MAX_USAGES]; /* usage array */
+	unsigned collection_index[HID_MAX_USAGES]; /* collection index array */
+	unsigned usage_index;
+	unsigned usage_minimum;
+	unsigned delimiter_depth;
+	unsigned delimiter_branch;
+};
+
+/*
+ * This is the collection stack. We climb up the stack to determine
+ * application and function of each field.
+ */
+
+struct hid_collection {
+	unsigned type;
+	unsigned usage;
+	unsigned level;
+};
+
+struct hid_usage {
+	unsigned  hid;			/* hid usage code */
+	unsigned  collection_index;	/* index into collection array */
+	/* hidinput data */
+	__u16     code;			/* input driver code */
+	__u8      type;			/* input driver type */
+	__s8	  hat_min;		/* hat switch fun */
+	__s8	  hat_max;		/* ditto */
+	__s8	  hat_dir;		/* ditto */
+};
+
+struct hid_input;
+
+struct hid_field {
+	unsigned  physical;		/* physical usage for this field */
+	unsigned  logical;		/* logical usage for this field */
+	unsigned  application;		/* application usage for this field */
+	struct hid_usage *usage;	/* usage table for this function */
+	unsigned  maxusage;		/* maximum usage index */
+	unsigned  flags;		/* main-item flags (i.e. volatile,array,constant) */
+	unsigned  report_offset;	/* bit offset in the report */
+	unsigned  report_size;		/* size of this field in the report */
+	unsigned  report_count;		/* number of this field in the report */
+	unsigned  report_type;		/* (input,output,feature) */
+	__s32    *value;		/* last known value(s) */
+	__s32     logical_minimum;
+	__s32     logical_maximum;
+	__s32     physical_minimum;
+	__s32     physical_maximum;
+	__s32     unit_exponent;
+	unsigned  unit;
+	struct hid_report *report;	/* associated report */
+	unsigned index;			/* index into report->field[] */
+	/* hidinput data */
+	struct hid_input *hidinput;	/* associated input structure */
+	__u16 dpad;			/* dpad input code */
+};
+
+#define HID_MAX_FIELDS 128
+
+struct hid_report {
+	struct list_head list;
+	unsigned id;					/* id of this report */
+	unsigned type;					/* report type */
+	struct hid_field *field[HID_MAX_FIELDS];	/* fields of the report */
+	unsigned maxfield;				/* maximum valid field index */
+	unsigned size;					/* size of the report (bits) */
+	struct hid_device *device;			/* associated device */
+};
+
+struct hid_report_enum {
+	unsigned numbered;
+	struct list_head report_list;
+	struct hid_report *report_id_hash[256];
+};
+
+#define HID_REPORT_TYPES 3
+
+#define HID_MIN_BUFFER_SIZE	64		/* make sure there is at least a packet size of space */
+#define HID_MAX_BUFFER_SIZE	4096		/* 4kb */
+#define HID_CONTROL_FIFO_SIZE	256		/* to init devices with >100 reports */
+#define HID_OUTPUT_FIFO_SIZE	64
+
+struct hid_control_fifo {
+	unsigned char dir;
+	struct hid_report *report;
+	char *raw_report;
+};
+
+struct hid_output_fifo {
+	struct hid_report *report;
+	char *raw_report;
+};
+
+#define HID_CLAIMED_INPUT	1
+#define HID_CLAIMED_HIDDEV	2
+#define HID_CLAIMED_HIDRAW	4
+
+#define HID_STAT_ADDED		1
+#define HID_STAT_PARSED		2
+
+struct hid_input {
+	struct list_head list;
+	struct hid_report *report;
+	struct input_dev *input;
+};
+
+enum hid_type {
+	HID_TYPE_OTHER = 0,
+	HID_TYPE_USBMOUSE,
+	HID_TYPE_USBNONE
+};
+
+struct hid_driver;
+struct hid_ll_driver;
+
+struct hid_device {							/* device report descriptor */
+	__u8 *rdesc;
+	unsigned rsize;
+	struct hid_collection *collection;				/* List of HID collections */
+	unsigned collection_size;					/* Number of allocated hid_collections */
+	unsigned maxcollection;						/* Number of parsed collections */
+	unsigned maxapplication;					/* Number of applications */
+	__u16 bus;							/* BUS ID */
+	__u32 vendor;							/* Vendor ID */
+	__u32 product;							/* Product ID */
+	__u32 version;							/* HID version */
+	enum hid_type type;						/* device type (mouse, kbd, ...) */
+	unsigned country;						/* HID country */
+	struct hid_report_enum report_enum[HID_REPORT_TYPES];
+
+	struct semaphore driver_lock;					/* protects the current driver */
+	struct device dev;						/* device */
+	struct hid_driver *driver;
+	struct hid_ll_driver *ll_driver;
+
+#ifdef CONFIG_HID_BATTERY_STRENGTH
+	/*
+	 * Power supply information for HID devices which report
+	 * battery strength. power_supply is registered iff
+	 * battery.name is non-NULL.
+	 */
+	struct power_supply battery;
+	__s32 battery_min;
+	__s32 battery_max;
+	__s32 battery_report_type;
+	__s32 battery_report_id;
+#endif
+
+	unsigned int status;						/* see STAT flags above */
+	unsigned claimed;						/* Claimed by hidinput, hiddev? */
+	unsigned quirks;						/* Various quirks the device can pull on us */
+
+	struct list_head inputs;					/* The list of inputs */
+	void *hiddev;							/* The hiddev structure */
+	void *hidraw;
+	int minor;							/* Hiddev minor number */
+
+	int open;							/* is the device open by anyone? */
+	char name[128];							/* Device name */
+	char phys[64];							/* Device physical location */
+	char uniq[64];							/* Device unique identifier (serial #) */
+
+	void *driver_data;
+
+	/* temporary hid_ff handling (until moved to the drivers) */
+	int (*ff_init)(struct hid_device *);
+
+	/* hiddev event handler */
+	int (*hiddev_connect)(struct hid_device *, unsigned int);
+	void (*hiddev_disconnect)(struct hid_device *);
+	void (*hiddev_hid_event) (struct hid_device *, struct hid_field *field,
+				  struct hid_usage *, __s32);
+	void (*hiddev_report_event) (struct hid_device *, struct hid_report *);
+
+	/* handler for raw input (Get_Report) data, used by hidraw */
+	int (*hid_get_raw_report) (struct hid_device *, unsigned char, __u8 *, size_t, unsigned char);
+
+	/* handler for raw output data, used by hidraw */
+	int (*hid_output_raw_report) (struct hid_device *, __u8 *, size_t, unsigned char);
+
+	/* debugging support via debugfs */
+	unsigned short debug;
+	struct dentry *debug_dir;
+	struct dentry *debug_rdesc;
+	struct dentry *debug_events;
+	struct list_head debug_list;
+	wait_queue_head_t debug_wait;
+};
+
+static inline void *hid_get_drvdata(struct hid_device *hdev)
+{
+	return dev_get_drvdata(&hdev->dev);
+}
+
+static inline void hid_set_drvdata(struct hid_device *hdev, void *data)
+{
+	dev_set_drvdata(&hdev->dev, data);
+}
+
+#define HID_GLOBAL_STACK_SIZE 4
+#define HID_COLLECTION_STACK_SIZE 4
+
+struct hid_parser {
+	struct hid_global     global;
+	struct hid_global     global_stack[HID_GLOBAL_STACK_SIZE];
+	unsigned              global_stack_ptr;
+	struct hid_local      local;
+	unsigned              collection_stack[HID_COLLECTION_STACK_SIZE];
+	unsigned              collection_stack_ptr;
+	struct hid_device    *device;
+};
+
+struct hid_class_descriptor {
+	__u8  bDescriptorType;
+	__le16 wDescriptorLength;
+} __attribute__ ((packed));
+
+struct hid_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__le16 bcdHID;
+	__u8  bCountryCode;
+	__u8  bNumDescriptors;
+
+	struct hid_class_descriptor desc[1];
+} __attribute__ ((packed));
+
+#define HID_DEVICE(b, ven, prod) \
+	.bus = (b), \
+	.vendor = (ven), .product = (prod)
+
+#define HID_USB_DEVICE(ven, prod)	HID_DEVICE(BUS_USB, ven, prod)
+#define HID_BLUETOOTH_DEVICE(ven, prod)	HID_DEVICE(BUS_BLUETOOTH, ven, prod)
+
+#define HID_REPORT_ID(rep) \
+	.report_type = (rep)
+#define HID_USAGE_ID(uhid, utype, ucode) \
+	.usage_hid = (uhid), .usage_type = (utype), .usage_code = (ucode)
+/* we don't want to catch types and codes equal to 0 */
+#define HID_TERMINATOR		(HID_ANY_ID - 1)
+
+struct hid_report_id {
+	__u32 report_type;
+};
+struct hid_usage_id {
+	__u32 usage_hid;
+	__u32 usage_type;
+	__u32 usage_code;
+};
+
+/**
+ * struct hid_driver
+ * @name: driver name (e.g. "Footech_bar-wheel")
+ * @id_table: which devices is this driver for (must be non-NULL for probe
+ * 	      to be called)
+ * @dyn_list: list of dynamically added device ids
+ * @dyn_lock: lock protecting @dyn_list
+ * @probe: new device inserted
+ * @remove: device removed (NULL if not a hot-plug capable driver)
+ * @report_table: on which reports to call raw_event (NULL means all)
+ * @raw_event: if report in report_table, this hook is called (NULL means nop)
+ * @usage_table: on which events to call event (NULL means all)
+ * @event: if usage in usage_table, this hook is called (NULL means nop)
+ * @report_fixup: called before report descriptor parsing (NULL means nop)
+ * @input_mapping: invoked on input registering before mapping an usage
+ * @input_mapped: invoked on input registering after mapping an usage
+ * @feature_mapping: invoked on feature registering
+ * @input_register: called just before input device is registered after reports
+ * 		    are parsed.
+ * @suspend: invoked on suspend (NULL means nop)
+ * @resume: invoked on resume if device was not reset (NULL means nop)
+ * @reset_resume: invoked on resume if device was reset (NULL means nop)
+ *
+ * raw_event and event should return 0 on no action performed, 1 when no
+ * further processing should be done and negative on error
+ *
+ * input_mapping shall return a negative value to completely ignore this usage
+ * (e.g. doubled or invalid usage), zero to continue with parsing of this
+ * usage by generic code (no special handling needed) or positive to skip
+ * generic parsing (needed special handling which was done in the hook already)
+ * input_mapped shall return negative to inform the layer that this usage
+ * should not be considered for further processing or zero to notify that
+ * no processing was performed and should be done in a generic manner
+ * Both these functions may be NULL which means the same behavior as returning
+ * zero from them.
+ */
+struct hid_driver {
+	char *name;
+	const struct hid_device_id *id_table;
+
+	struct list_head dyn_list;
+	spinlock_t dyn_lock;
+
+	int (*probe)(struct hid_device *dev, const struct hid_device_id *id);
+	void (*remove)(struct hid_device *dev);
+
+	const struct hid_report_id *report_table;
+	int (*raw_event)(struct hid_device *hdev, struct hid_report *report,
+			u8 *data, int size);
+	const struct hid_usage_id *usage_table;
+	int (*event)(struct hid_device *hdev, struct hid_field *field,
+			struct hid_usage *usage, __s32 value);
+
+	__u8 *(*report_fixup)(struct hid_device *hdev, __u8 *buf,
+			unsigned int *size);
+
+	int (*input_mapping)(struct hid_device *hdev,
+			struct hid_input *hidinput, struct hid_field *field,
+			struct hid_usage *usage, unsigned long **bit, int *max);
+	int (*input_mapped)(struct hid_device *hdev,
+			struct hid_input *hidinput, struct hid_field *field,
+			struct hid_usage *usage, unsigned long **bit, int *max);
+	void (*feature_mapping)(struct hid_device *hdev,
+			struct hid_field *field,
+			struct hid_usage *usage);
+	int (*input_register)(struct hid_device *hdev, struct hid_input
+			*hidinput);
+#ifdef CONFIG_PM
+	int (*suspend)(struct hid_device *hdev, pm_message_t message);
+	int (*resume)(struct hid_device *hdev);
+	int (*reset_resume)(struct hid_device *hdev);
+#endif
+/* private: */
+	struct device_driver driver;
+};
+
+/**
+ * hid_ll_driver - low level driver callbacks
+ * @start: called on probe to start the device
+ * @stop: called on remove
+ * @open: called by input layer on open
+ * @close: called by input layer on close
+ * @hidinput_input_event: event input event (e.g. ff or leds)
+ * @parse: this method is called only once to parse the device data,
+ *	   shouldn't allocate anything to not leak memory
+ */
+struct hid_ll_driver {
+	int (*start)(struct hid_device *hdev);
+	void (*stop)(struct hid_device *hdev);
+
+	int (*open)(struct hid_device *hdev);
+	void (*close)(struct hid_device *hdev);
+
+	int (*power)(struct hid_device *hdev, int level);
+
+	int (*hidinput_input_event) (struct input_dev *idev, unsigned int type,
+			unsigned int code, int value);
+
+	int (*parse)(struct hid_device *hdev);
+};
+
+#define	PM_HINT_FULLON	1<<5
+#define PM_HINT_NORMAL	1<<1
+
+/* Applications from HID Usage Tables 4/8/99 Version 1.1 */
+/* We ignore a few input applications that are not widely used */
+#define IS_INPUT_APPLICATION(a) (((a >= 0x00010000) && (a <= 0x00010008)) || (a == 0x00010080) || (a == 0x000c0001) || ((a >= 0x000d0002) && (a <= 0x000d0006)))
+
+/* HID core API */
+
+extern int hid_debug;
+
+extern int hid_add_device(struct hid_device *);
+extern void hid_destroy_device(struct hid_device *);
+
+extern int __must_check __hid_register_driver(struct hid_driver *,
+		struct module *, const char *mod_name);
+
+/* use a define to avoid include chaining to get THIS_MODULE & friends */
+#define hid_register_driver(driver) \
+	__hid_register_driver(driver, THIS_MODULE, KBUILD_MODNAME)
+
+extern void hid_unregister_driver(struct hid_driver *);
+
+extern void hidinput_hid_event(struct hid_device *, struct hid_field *, struct hid_usage *, __s32);
+extern void hidinput_report_event(struct hid_device *hid, struct hid_report *report);
+extern int hidinput_connect(struct hid_device *hid, unsigned int force);
+extern void hidinput_disconnect(struct hid_device *);
+
+int hid_set_field(struct hid_field *, unsigned, __s32);
+int hid_input_report(struct hid_device *, int type, u8 *, int, int);
+int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int code, struct hid_field **field);
+struct hid_field *hidinput_get_led_field(struct hid_device *hid);
+unsigned int hidinput_count_leds(struct hid_device *hid);
+void hid_output_report(struct hid_report *report, __u8 *data);
+struct hid_device *hid_allocate_device(void);
+struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id);
+int hid_parse_report(struct hid_device *hid, __u8 *start, unsigned size);
+int hid_check_keys_pressed(struct hid_device *hid);
+int hid_connect(struct hid_device *hid, unsigned int connect_mask);
+void hid_disconnect(struct hid_device *hid);
+const struct hid_device_id *hid_match_id(struct hid_device *hdev,
+					 const struct hid_device_id *id);
+
+/**
+ * hid_map_usage - map usage input bits
+ *
+ * @hidinput: hidinput which we are interested in
+ * @usage: usage to fill in
+ * @bit: pointer to input->{}bit (out parameter)
+ * @max: maximal valid usage->code to consider later (out parameter)
+ * @type: input event type (EV_KEY, EV_REL, ...)
+ * @c: code which corresponds to this usage and type
+ */
+static inline void hid_map_usage(struct hid_input *hidinput,
+		struct hid_usage *usage, unsigned long **bit, int *max,
+		__u8 type, __u16 c)
+{
+	struct input_dev *input = hidinput->input;
+
+	usage->type = type;
+	usage->code = c;
+
+	switch (type) {
+	case EV_ABS:
+		*bit = input->absbit;
+		*max = ABS_MAX;
+		break;
+	case EV_REL:
+		*bit = input->relbit;
+		*max = REL_MAX;
+		break;
+	case EV_KEY:
+		*bit = input->keybit;
+		*max = KEY_MAX;
+		break;
+	case EV_LED:
+		*bit = input->ledbit;
+		*max = LED_MAX;
+		break;
+	}
+}
+
+/**
+ * hid_map_usage_clear - map usage input bits and clear the input bit
+ *
+ * The same as hid_map_usage, except the @c bit is also cleared in supported
+ * bits (@bit).
+ */
+static inline void hid_map_usage_clear(struct hid_input *hidinput,
+		struct hid_usage *usage, unsigned long **bit, int *max,
+		__u8 type, __u16 c)
+{
+	hid_map_usage(hidinput, usage, bit, max, type, c);
+	clear_bit(c, *bit);
+}
+
+/**
+ * hid_parse - parse HW reports
+ *
+ * @hdev: hid device
+ *
+ * Call this from probe after you set up the device (if needed). Your
+ * report_fixup will be called (if non-NULL) after reading raw report from
+ * device before passing it to hid layer for real parsing.
+ */
+static inline int __must_check hid_parse(struct hid_device *hdev)
+{
+	int ret;
+
+	if (hdev->status & HID_STAT_PARSED)
+		return 0;
+
+	ret = hdev->ll_driver->parse(hdev);
+	if (!ret)
+		hdev->status |= HID_STAT_PARSED;
+
+	return ret;
+}
+
+/**
+ * hid_hw_start - start underlaying HW
+ *
+ * @hdev: hid device
+ * @connect_mask: which outputs to connect, see HID_CONNECT_*
+ *
+ * Call this in probe function *after* hid_parse. This will setup HW buffers
+ * and start the device (if not deffered to device open). hid_hw_stop must be
+ * called if this was successful.
+ */
+static inline int __must_check hid_hw_start(struct hid_device *hdev,
+		unsigned int connect_mask)
+{
+	int ret = hdev->ll_driver->start(hdev);
+	if (ret || !connect_mask)
+		return ret;
+	ret = hid_connect(hdev, connect_mask);
+	if (ret)
+		hdev->ll_driver->stop(hdev);
+	return ret;
+}
+
+/**
+ * hid_hw_stop - stop underlaying HW
+ *
+ * @hdev: hid device
+ *
+ * This is usually called from remove function or from probe when something
+ * failed and hid_hw_start was called already.
+ */
+static inline void hid_hw_stop(struct hid_device *hdev)
+{
+	hid_disconnect(hdev);
+	hdev->ll_driver->stop(hdev);
+}
+
+/**
+ * hid_hw_open - signal underlaying HW to start delivering events
+ *
+ * @hdev: hid device
+ *
+ * Tell underlying HW to start delivering events from the device.
+ * This function should be called sometime after successful call
+ * to hid_hiw_start().
+ */
+static inline int __must_check hid_hw_open(struct hid_device *hdev)
+{
+	return hdev->ll_driver->open(hdev);
+}
+
+/**
+ * hid_hw_close - signal underlaying HW to stop delivering events
+ *
+ * @hdev: hid device
+ *
+ * This function indicates that we are not interested in the events
+ * from this device anymore. Delivery of events may or may not stop,
+ * depending on the number of users still outstanding.
+ */
+static inline void hid_hw_close(struct hid_device *hdev)
+{
+	hdev->ll_driver->close(hdev);
+}
+
+/**
+ * hid_hw_power - requests underlying HW to go into given power mode
+ *
+ * @hdev: hid device
+ * @level: requested power level (one of %PM_HINT_* defines)
+ *
+ * This function requests underlying hardware to enter requested power
+ * mode.
+ */
+
+static inline int hid_hw_power(struct hid_device *hdev, int level)
+{
+	return hdev->ll_driver->power ? hdev->ll_driver->power(hdev, level) : 0;
+}
+
+void hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size,
+		int interrupt);
+
+extern int hid_generic_init(void);
+extern void hid_generic_exit(void);
+
+/* HID quirks API */
+u32 usbhid_lookup_quirk(const u16 idVendor, const u16 idProduct);
+int usbhid_quirks_init(char **quirks_param);
+void usbhid_quirks_exit(void);
+void usbhid_set_leds(struct hid_device *hid);
+
+#ifdef CONFIG_HID_PID
+int hid_pidff_init(struct hid_device *hid);
+#else
+#define hid_pidff_init NULL
+#endif
+
+#define dbg_hid(format, arg...)						\
+do {									\
+	if (hid_debug)							\
+		printk(KERN_DEBUG "%s: " format, __FILE__, ##arg);	\
+} while (0)
+
+#define hid_printk(level, hid, fmt, arg...)		\
+	dev_printk(level, &(hid)->dev, fmt, ##arg)
+#define hid_emerg(hid, fmt, arg...)			\
+	dev_emerg(&(hid)->dev, fmt, ##arg)
+#define hid_crit(hid, fmt, arg...)			\
+	dev_crit(&(hid)->dev, fmt, ##arg)
+#define hid_alert(hid, fmt, arg...)			\
+	dev_alert(&(hid)->dev, fmt, ##arg)
+#define hid_err(hid, fmt, arg...)			\
+	dev_err(&(hid)->dev, fmt, ##arg)
+#define hid_notice(hid, fmt, arg...)			\
+	dev_notice(&(hid)->dev, fmt, ##arg)
+#define hid_warn(hid, fmt, arg...)			\
+	dev_warn(&(hid)->dev, fmt, ##arg)
+#define hid_info(hid, fmt, arg...)			\
+	dev_info(&(hid)->dev, fmt, ##arg)
+#define hid_dbg(hid, fmt, arg...)			\
+	dev_dbg(&(hid)->dev, fmt, ##arg)
+
+#endif /* __KERNEL__ */
+
+#endif
+
diff --git a/include/linux/hiddev.h b/include/linux/hiddev.h
new file mode 100644
index 00000000..a3f481a3
--- /dev/null
+++ b/include/linux/hiddev.h
@@ -0,0 +1,240 @@
+#ifndef _HIDDEV_H
+#define _HIDDEV_H
+
+/*
+ *  Copyright (c) 1999-2000 Vojtech Pavlik
+ *
+ *  Sponsored by SuSE
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or 
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * 
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
+ * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
+ */
+
+#include <linux/types.h>
+
+/*
+ * The event structure itself
+ */
+
+struct hiddev_event {
+	unsigned hid;
+	signed int value;
+};
+
+struct hiddev_devinfo {
+	__u32 bustype;
+	__u32 busnum;
+	__u32 devnum;
+	__u32 ifnum;
+	__s16 vendor;
+	__s16 product;
+	__s16 version;
+	__u32 num_applications;
+};
+
+struct hiddev_collection_info {
+	__u32 index;
+	__u32 type;
+	__u32 usage;
+	__u32 level;
+};
+
+#define HID_STRING_SIZE 256
+struct hiddev_string_descriptor {
+	__s32 index;
+	char value[HID_STRING_SIZE];
+};
+
+struct hiddev_report_info {
+	__u32 report_type;
+	__u32 report_id;
+	__u32 num_fields;
+};
+
+/* To do a GUSAGE/SUSAGE, fill in at least usage_code,  report_type and 
+ * report_id.  Set report_id to REPORT_ID_UNKNOWN if the rest of the fields 
+ * are unknown.  Otherwise use a usage_ref struct filled in from a previous 
+ * successful GUSAGE call to save time.  To actually send a value to the
+ * device, perform a SUSAGE first, followed by a SREPORT.  An INITREPORT or a
+ * GREPORT isn't necessary for a GUSAGE to return valid data.
+ */
+#define HID_REPORT_ID_UNKNOWN 0xffffffff
+#define HID_REPORT_ID_FIRST   0x00000100
+#define HID_REPORT_ID_NEXT    0x00000200
+#define HID_REPORT_ID_MASK    0x000000ff
+#define HID_REPORT_ID_MAX     0x000000ff
+
+#define HID_REPORT_TYPE_INPUT	1
+#define HID_REPORT_TYPE_OUTPUT	2
+#define HID_REPORT_TYPE_FEATURE	3
+#define HID_REPORT_TYPE_MIN     1
+#define HID_REPORT_TYPE_MAX     3
+
+struct hiddev_field_info {
+	__u32 report_type;
+	__u32 report_id;
+	__u32 field_index;
+	__u32 maxusage;
+	__u32 flags;
+	__u32 physical;		/* physical usage for this field */
+	__u32 logical;		/* logical usage for this field */
+	__u32 application;		/* application usage for this field */
+	__s32 logical_minimum;
+	__s32 logical_maximum;
+	__s32 physical_minimum;
+	__s32 physical_maximum;
+	__u32 unit_exponent;
+	__u32 unit;
+};
+
+/* Fill in report_type, report_id and field_index to get the information on a
+ * field.
+ */
+#define HID_FIELD_CONSTANT		0x001
+#define HID_FIELD_VARIABLE		0x002
+#define HID_FIELD_RELATIVE		0x004
+#define HID_FIELD_WRAP			0x008	
+#define HID_FIELD_NONLINEAR		0x010
+#define HID_FIELD_NO_PREFERRED		0x020
+#define HID_FIELD_NULL_STATE		0x040
+#define HID_FIELD_VOLATILE		0x080
+#define HID_FIELD_BUFFERED_BYTE		0x100
+
+struct hiddev_usage_ref {
+	__u32 report_type;
+	__u32 report_id;
+	__u32 field_index;
+	__u32 usage_index;
+	__u32 usage_code;
+	__s32 value;
+};
+
+/* hiddev_usage_ref_multi is used for sending multiple bytes to a control.
+ * It really manifests itself as setting the value of consecutive usages */
+#define HID_MAX_MULTI_USAGES 1024
+struct hiddev_usage_ref_multi {
+	struct hiddev_usage_ref uref;
+	__u32 num_values;
+	__s32 values[HID_MAX_MULTI_USAGES];
+};
+
+/* FIELD_INDEX_NONE is returned in read() data from the kernel when flags
+ * is set to (HIDDEV_FLAG_UREF | HIDDEV_FLAG_REPORT) and a new report has
+ * been sent by the device 
+ */
+#define HID_FIELD_INDEX_NONE 0xffffffff
+
+/*
+ * Protocol version.
+ */
+
+#define HID_VERSION		0x010004
+
+/*
+ * IOCTLs (0x00 - 0x7f)
+ */
+
+#define HIDIOCGVERSION		_IOR('H', 0x01, int)
+#define HIDIOCAPPLICATION	_IO('H', 0x02)
+#define HIDIOCGDEVINFO		_IOR('H', 0x03, struct hiddev_devinfo)
+#define HIDIOCGSTRING		_IOR('H', 0x04, struct hiddev_string_descriptor)
+#define HIDIOCINITREPORT	_IO('H', 0x05)
+#define HIDIOCGNAME(len)	_IOC(_IOC_READ, 'H', 0x06, len)
+#define HIDIOCGREPORT		_IOW('H', 0x07, struct hiddev_report_info)
+#define HIDIOCSREPORT		_IOW('H', 0x08, struct hiddev_report_info)
+#define HIDIOCGREPORTINFO	_IOWR('H', 0x09, struct hiddev_report_info)
+#define HIDIOCGFIELDINFO	_IOWR('H', 0x0A, struct hiddev_field_info)
+#define HIDIOCGUSAGE		_IOWR('H', 0x0B, struct hiddev_usage_ref)
+#define HIDIOCSUSAGE		_IOW('H', 0x0C, struct hiddev_usage_ref)
+#define HIDIOCGUCODE		_IOWR('H', 0x0D, struct hiddev_usage_ref)
+#define HIDIOCGFLAG		_IOR('H', 0x0E, int)
+#define HIDIOCSFLAG		_IOW('H', 0x0F, int)
+#define HIDIOCGCOLLECTIONINDEX	_IOW('H', 0x10, struct hiddev_usage_ref)
+#define HIDIOCGCOLLECTIONINFO	_IOWR('H', 0x11, struct hiddev_collection_info)
+#define HIDIOCGPHYS(len)	_IOC(_IOC_READ, 'H', 0x12, len)
+
+/* For writing/reading to multiple/consecutive usages */
+#define HIDIOCGUSAGES		_IOWR('H', 0x13, struct hiddev_usage_ref_multi)
+#define HIDIOCSUSAGES		_IOW('H', 0x14, struct hiddev_usage_ref_multi)
+
+/* 
+ * Flags to be used in HIDIOCSFLAG
+ */
+#define HIDDEV_FLAG_UREF	0x1
+#define HIDDEV_FLAG_REPORT	0x2
+#define HIDDEV_FLAGS		0x3
+
+/* To traverse the input report descriptor info for a HID device, perform the 
+ * following:
+ *
+ * rinfo.report_type = HID_REPORT_TYPE_INPUT;
+ * rinfo.report_id = HID_REPORT_ID_FIRST;
+ * ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo);
+ *
+ * while (ret >= 0) {
+ * 	for (i = 0; i < rinfo.num_fields; i++) {
+ * 		finfo.report_type = rinfo.report_type;
+ * 		finfo.report_id = rinfo.report_id;
+ * 		finfo.field_index = i;
+ * 		ioctl(fd, HIDIOCGFIELDINFO, &finfo);
+ * 		for (j = 0; j < finfo.maxusage; j++) {
+ * 			uref.report_type = rinfo.report_type;
+ * 			uref.report_id = rinfo.report_id;
+ * 			uref.field_index = i;
+ * 			uref.usage_index = j;
+ * 			ioctl(fd, HIDIOCGUCODE, &uref);
+ * 			ioctl(fd, HIDIOCGUSAGE, &uref);
+ * 		}
+ * 	}
+ * 	rinfo.report_id |= HID_REPORT_ID_NEXT;
+ * 	ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo);
+ * }
+ */
+
+
+#ifdef __KERNEL__
+
+/*
+ * In-kernel definitions.
+ */
+
+struct hid_device;
+struct hid_usage;
+struct hid_field;
+struct hid_report;
+
+#ifdef CONFIG_USB_HIDDEV
+int hiddev_connect(struct hid_device *hid, unsigned int force);
+void hiddev_disconnect(struct hid_device *);
+void hiddev_hid_event(struct hid_device *hid, struct hid_field *field,
+		      struct hid_usage *usage, __s32 value);
+void hiddev_report_event(struct hid_device *hid, struct hid_report *report);
+#else
+static inline int hiddev_connect(struct hid_device *hid,
+		unsigned int force)
+{ return -1; }
+static inline void hiddev_disconnect(struct hid_device *hid) { }
+static inline void hiddev_hid_event(struct hid_device *hid, struct hid_field *field,
+		      struct hid_usage *usage, __s32 value) { }
+static inline void hiddev_report_event(struct hid_device *hid, struct hid_report *report) { }
+#endif
+
+#endif
+#endif
diff --git a/include/linux/hidraw.h b/include/linux/hidraw.h
new file mode 100644
index 00000000..4b88e697
--- /dev/null
+++ b/include/linux/hidraw.h
@@ -0,0 +1,92 @@
+#ifndef _HIDRAW_H
+#define _HIDRAW_H
+
+/*
+ *  Copyright (c) 2007 Jiri Kosina
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/hid.h>
+#include <linux/types.h>
+
+struct hidraw_report_descriptor {
+	__u32 size;
+	__u8 value[HID_MAX_DESCRIPTOR_SIZE];
+};
+
+struct hidraw_devinfo {
+	__u32 bustype;
+	__s16 vendor;
+	__s16 product;
+};
+
+/* ioctl interface */
+#define HIDIOCGRDESCSIZE	_IOR('H', 0x01, int)
+#define HIDIOCGRDESC		_IOR('H', 0x02, struct hidraw_report_descriptor)
+#define HIDIOCGRAWINFO		_IOR('H', 0x03, struct hidraw_devinfo)
+#define HIDIOCGRAWNAME(len)     _IOC(_IOC_READ, 'H', 0x04, len)
+#define HIDIOCGRAWPHYS(len)     _IOC(_IOC_READ, 'H', 0x05, len)
+/* The first byte of SFEATURE and GFEATURE is the report number */
+#define HIDIOCSFEATURE(len)    _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len)
+#define HIDIOCGFEATURE(len)    _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x07, len)
+
+#define HIDRAW_FIRST_MINOR 0
+#define HIDRAW_MAX_DEVICES 64
+/* number of reports to buffer */
+#define HIDRAW_BUFFER_SIZE 64
+
+
+/* kernel-only API declarations */
+#ifdef __KERNEL__
+
+struct hidraw {
+	unsigned int minor;
+	int exist;
+	int open;
+	wait_queue_head_t wait;
+	struct hid_device *hid;
+	struct device *dev;
+	struct list_head list;
+};
+
+struct hidraw_report {
+	__u8 *value;
+	int len;
+};
+
+struct hidraw_list {
+	struct hidraw_report buffer[HIDRAW_BUFFER_SIZE];
+	int head;
+	int tail;
+	struct fasync_struct *fasync;
+	struct hidraw *hidraw;
+	struct list_head node;
+	struct mutex read_mutex;
+};
+
+#ifdef CONFIG_HIDRAW
+int hidraw_init(void);
+void hidraw_exit(void);
+void hidraw_report_event(struct hid_device *, u8 *, int);
+int hidraw_connect(struct hid_device *);
+void hidraw_disconnect(struct hid_device *);
+#else
+static inline int hidraw_init(void) { return 0; }
+static inline void hidraw_exit(void) { }
+static inline void hidraw_report_event(struct hid_device *hid, u8 *data, int len) { }
+static inline int hidraw_connect(struct hid_device *hid) { return -1; }
+static inline void hidraw_disconnect(struct hid_device *hid) { }
+#endif
+
+#endif
+
+#endif
diff --git a/include/linux/highmem.h b/include/linux/highmem.h
new file mode 100644
index 00000000..d3999b4e
--- /dev/null
+++ b/include/linux/highmem.h
@@ -0,0 +1,287 @@
+#ifndef _LINUX_HIGHMEM_H
+#define _LINUX_HIGHMEM_H
+
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/bug.h>
+#include <linux/mm.h>
+#include <linux/uaccess.h>
+#include <linux/hardirq.h>
+
+#include <asm/cacheflush.h>
+
+#ifndef ARCH_HAS_FLUSH_ANON_PAGE
+static inline void flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned long vmaddr)
+{
+}
+#endif
+
+#ifndef ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
+static inline void flush_kernel_dcache_page(struct page *page)
+{
+}
+static inline void flush_kernel_vmap_range(void *vaddr, int size)
+{
+}
+static inline void invalidate_kernel_vmap_range(void *vaddr, int size)
+{
+}
+#endif
+
+#include <asm/kmap_types.h>
+
+#ifdef CONFIG_HIGHMEM
+#include <asm/highmem.h>
+
+/* declarations for linux/mm/highmem.c */
+unsigned int nr_free_highpages(void);
+extern unsigned long totalhigh_pages;
+
+void kmap_flush_unused(void);
+
+#else /* CONFIG_HIGHMEM */
+
+static inline unsigned int nr_free_highpages(void) { return 0; }
+
+#define totalhigh_pages 0UL
+
+#ifndef ARCH_HAS_KMAP
+static inline void *kmap(struct page *page)
+{
+	might_sleep();
+	return page_address(page);
+}
+
+static inline void kunmap(struct page *page)
+{
+}
+
+static inline void *kmap_atomic(struct page *page)
+{
+	pagefault_disable();
+	return page_address(page);
+}
+#define kmap_atomic_prot(page, prot)	kmap_atomic(page)
+
+static inline void __kunmap_atomic(void *addr)
+{
+	pagefault_enable();
+}
+
+#define kmap_atomic_pfn(pfn)	kmap_atomic(pfn_to_page(pfn))
+#define kmap_atomic_to_page(ptr)	virt_to_page(ptr)
+
+#define kmap_flush_unused()	do {} while(0)
+#endif
+
+#endif /* CONFIG_HIGHMEM */
+
+#if defined(CONFIG_HIGHMEM) || defined(CONFIG_X86_32)
+
+DECLARE_PER_CPU(int, __kmap_atomic_idx);
+
+static inline int kmap_atomic_idx_push(void)
+{
+	int idx = __this_cpu_inc_return(__kmap_atomic_idx) - 1;
+
+#ifdef CONFIG_DEBUG_HIGHMEM
+	WARN_ON_ONCE(in_irq() && !irqs_disabled());
+	BUG_ON(idx > KM_TYPE_NR);
+#endif
+	return idx;
+}
+
+static inline int kmap_atomic_idx(void)
+{
+	return __this_cpu_read(__kmap_atomic_idx) - 1;
+}
+
+static inline void kmap_atomic_idx_pop(void)
+{
+#ifdef CONFIG_DEBUG_HIGHMEM
+	int idx = __this_cpu_dec_return(__kmap_atomic_idx);
+
+	BUG_ON(idx < 0);
+#else
+	__this_cpu_dec(__kmap_atomic_idx);
+#endif
+}
+
+#endif
+
+/*
+ * NOTE:
+ * kmap_atomic() and kunmap_atomic() with two arguments are deprecated.
+ * We only keep them for backward compatibility, any usage of them
+ * are now warned.
+ */
+
+#define PASTE(a, b) a ## b
+#define PASTE2(a, b) PASTE(a, b)
+
+#define NARG_(_2, _1, n, ...) n
+#define NARG(...) NARG_(__VA_ARGS__, 2, 1, :)
+
+static inline void __deprecated *kmap_atomic_deprecated(struct page *page,
+							enum km_type km)
+{
+	return kmap_atomic(page);
+}
+
+#define kmap_atomic1(...) kmap_atomic(__VA_ARGS__)
+#define kmap_atomic2(...) kmap_atomic_deprecated(__VA_ARGS__)
+#define kmap_atomic(...) PASTE2(kmap_atomic, NARG(__VA_ARGS__)(__VA_ARGS__))
+
+static inline void __deprecated __kunmap_atomic_deprecated(void *addr,
+							enum km_type km)
+{
+	__kunmap_atomic(addr);
+}
+
+/*
+ * Prevent people trying to call kunmap_atomic() as if it were kunmap()
+ * kunmap_atomic() should get the return value of kmap_atomic, not the page.
+ */
+#define kunmap_atomic_deprecated(addr, km)                      \
+do {                                                            \
+	BUILD_BUG_ON(__same_type((addr), struct page *));       \
+	__kunmap_atomic_deprecated(addr, km);                   \
+} while (0)
+
+#define kunmap_atomic_withcheck(addr)                           \
+do {                                                            \
+	BUILD_BUG_ON(__same_type((addr), struct page *));       \
+	__kunmap_atomic(addr);                                  \
+} while (0)
+
+#define kunmap_atomic1(...) kunmap_atomic_withcheck(__VA_ARGS__)
+#define kunmap_atomic2(...) kunmap_atomic_deprecated(__VA_ARGS__)
+#define kunmap_atomic(...) PASTE2(kunmap_atomic, NARG(__VA_ARGS__)(__VA_ARGS__))
+/**** End of C pre-processor tricks for deprecated macros ****/
+
+/* when CONFIG_HIGHMEM is not set these will be plain clear/copy_page */
+#ifndef clear_user_highpage
+static inline void clear_user_highpage(struct page *page, unsigned long vaddr)
+{
+	void *addr = kmap_atomic(page);
+	clear_user_page(addr, vaddr, page);
+	kunmap_atomic(addr);
+}
+#endif
+
+#ifndef __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+/**
+ * __alloc_zeroed_user_highpage - Allocate a zeroed HIGHMEM page for a VMA with caller-specified movable GFP flags
+ * @movableflags: The GFP flags related to the pages future ability to move like __GFP_MOVABLE
+ * @vma: The VMA the page is to be allocated for
+ * @vaddr: The virtual address the page will be inserted into
+ *
+ * This function will allocate a page for a VMA but the caller is expected
+ * to specify via movableflags whether the page will be movable in the
+ * future or not
+ *
+ * An architecture may override this function by defining
+ * __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE and providing their own
+ * implementation.
+ */
+static inline struct page *
+__alloc_zeroed_user_highpage(gfp_t movableflags,
+			struct vm_area_struct *vma,
+			unsigned long vaddr)
+{
+	struct page *page = alloc_page_vma(GFP_HIGHUSER | movableflags,
+			vma, vaddr);
+
+	if (page)
+		clear_user_highpage(page, vaddr);
+
+	return page;
+}
+#endif
+
+/**
+ * alloc_zeroed_user_highpage_movable - Allocate a zeroed HIGHMEM page for a VMA that the caller knows can move
+ * @vma: The VMA the page is to be allocated for
+ * @vaddr: The virtual address the page will be inserted into
+ *
+ * This function will allocate a page for a VMA that the caller knows will
+ * be able to migrate in the future using move_pages() or reclaimed
+ */
+static inline struct page *
+alloc_zeroed_user_highpage_movable(struct vm_area_struct *vma,
+					unsigned long vaddr)
+{
+	return __alloc_zeroed_user_highpage(__GFP_MOVABLE, vma, vaddr);
+}
+
+static inline void clear_highpage(struct page *page)
+{
+	void *kaddr = kmap_atomic(page);
+	clear_page(kaddr);
+	kunmap_atomic(kaddr);
+}
+
+static inline void zero_user_segments(struct page *page,
+	unsigned start1, unsigned end1,
+	unsigned start2, unsigned end2)
+{
+	void *kaddr = kmap_atomic(page);
+
+	BUG_ON(end1 > PAGE_SIZE || end2 > PAGE_SIZE);
+
+	if (end1 > start1)
+		memset(kaddr + start1, 0, end1 - start1);
+
+	if (end2 > start2)
+		memset(kaddr + start2, 0, end2 - start2);
+
+	kunmap_atomic(kaddr);
+	flush_dcache_page(page);
+}
+
+static inline void zero_user_segment(struct page *page,
+	unsigned start, unsigned end)
+{
+	zero_user_segments(page, start, end, 0, 0);
+}
+
+static inline void zero_user(struct page *page,
+	unsigned start, unsigned size)
+{
+	zero_user_segments(page, start, start + size, 0, 0);
+}
+
+static inline void __deprecated memclear_highpage_flush(struct page *page,
+			unsigned int offset, unsigned int size)
+{
+	zero_user(page, offset, size);
+}
+
+#ifndef __HAVE_ARCH_COPY_USER_HIGHPAGE
+
+static inline void copy_user_highpage(struct page *to, struct page *from,
+	unsigned long vaddr, struct vm_area_struct *vma)
+{
+	char *vfrom, *vto;
+
+	vfrom = kmap_atomic(from);
+	vto = kmap_atomic(to);
+	copy_user_page(vto, vfrom, vaddr, to);
+	kunmap_atomic(vto);
+	kunmap_atomic(vfrom);
+}
+
+#endif
+
+static inline void copy_highpage(struct page *to, struct page *from)
+{
+	char *vfrom, *vto;
+
+	vfrom = kmap_atomic(from);
+	vto = kmap_atomic(to);
+	copy_page(vto, vfrom);
+	kunmap_atomic(vto);
+	kunmap_atomic(vfrom);
+}
+
+#endif /* _LINUX_HIGHMEM_H */
diff --git a/include/linux/highuid.h b/include/linux/highuid.h
new file mode 100644
index 00000000..434e5624
--- /dev/null
+++ b/include/linux/highuid.h
@@ -0,0 +1,97 @@
+#ifndef _LINUX_HIGHUID_H
+#define _LINUX_HIGHUID_H
+
+#include <linux/types.h>
+
+/*
+ * general notes:
+ *
+ * CONFIG_UID16 is defined if the given architecture needs to
+ * support backwards compatibility for old system calls.
+ *
+ * kernel code should use uid_t and gid_t at all times when dealing with
+ * kernel-private data.
+ *
+ * old_uid_t and old_gid_t should only be different if CONFIG_UID16 is
+ * defined, else the platform should provide dummy typedefs for them
+ * such that they are equivalent to __kernel_{u,g}id_t.
+ *
+ * uid16_t and gid16_t are used on all architectures. (when dealing
+ * with structures hard coded to 16 bits, such as in filesystems)
+ */
+
+
+/*
+ * This is the "overflow" UID and GID. They are used to signify uid/gid
+ * overflow to old programs when they request uid/gid information but are
+ * using the old 16 bit interfaces.
+ * When you run a libc5 program, it will think that all highuid files or
+ * processes are owned by this uid/gid.
+ * The idea is that it's better to do so than possibly return 0 in lieu of
+ * 65536, etc.
+ */
+
+extern int overflowuid;
+extern int overflowgid;
+
+extern void __bad_uid(void);
+extern void __bad_gid(void);
+
+#define DEFAULT_OVERFLOWUID	65534
+#define DEFAULT_OVERFLOWGID	65534
+
+#ifdef CONFIG_UID16
+
+/* prevent uid mod 65536 effect by returning a default value for high UIDs */
+#define high2lowuid(uid) ((uid) & ~0xFFFF ? (old_uid_t)overflowuid : (old_uid_t)(uid))
+#define high2lowgid(gid) ((gid) & ~0xFFFF ? (old_gid_t)overflowgid : (old_gid_t)(gid))
+/*
+ * -1 is different in 16 bits than it is in 32 bits
+ * these macros are used by chown(), setreuid(), ...,
+ */
+#define low2highuid(uid) ((uid) == (old_uid_t)-1 ? (uid_t)-1 : (uid_t)(uid))
+#define low2highgid(gid) ((gid) == (old_gid_t)-1 ? (gid_t)-1 : (gid_t)(gid))
+
+#define __convert_uid(size, uid) \
+	(size >= sizeof(uid) ? (uid) : high2lowuid(uid))
+#define __convert_gid(size, gid) \
+	(size >= sizeof(gid) ? (gid) : high2lowgid(gid))
+	
+
+#else
+
+#define __convert_uid(size, uid) (uid)
+#define __convert_gid(size, gid) (gid)
+
+#endif /* !CONFIG_UID16 */
+
+/* uid/gid input should be always 32bit uid_t */
+#define SET_UID(var, uid) do { (var) = __convert_uid(sizeof(var), (uid)); } while (0)
+#define SET_GID(var, gid) do { (var) = __convert_gid(sizeof(var), (gid)); } while (0)
+
+/*
+ * Everything below this line is needed on all architectures, to deal with
+ * filesystems that only store 16 bits of the UID/GID, etc.
+ */
+
+/*
+ * This is the UID and GID that will get written to disk if a filesystem
+ * only supports 16-bit UIDs and the kernel has a high UID/GID to write
+ */
+extern int fs_overflowuid;
+extern int fs_overflowgid;
+
+#define DEFAULT_FS_OVERFLOWUID	65534
+#define DEFAULT_FS_OVERFLOWGID	65534
+
+/*
+ * Since these macros are used in architectures that only need limited
+ * 16-bit UID back compatibility, we won't use old_uid_t and old_gid_t
+ */
+#define fs_high2lowuid(uid) ((uid) & ~0xFFFF ? (uid16_t)fs_overflowuid : (uid16_t)(uid))
+#define fs_high2lowgid(gid) ((gid) & ~0xFFFF ? (gid16_t)fs_overflowgid : (gid16_t)(gid))
+
+#define low_16_bits(x)	((x) & 0xFFFF)
+#define high_16_bits(x)	(((x) & 0xFFFF0000) >> 16)
+
+#endif /* _LINUX_HIGHUID_H */
diff --git a/include/linux/hil.h b/include/linux/hil.h
new file mode 100644
index 00000000..523785a9
--- /dev/null
+++ b/include/linux/hil.h
@@ -0,0 +1,483 @@
+#ifndef _HIL_H_
+#define _HIL_H_
+
+/*
+ * Hewlett Packard Human Interface Loop (HP-HIL) Protocol -- header.
+ *
+ * Copyright (c) 2001 Brian S. Julin
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL").
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ *
+ * References:
+ * HP-HIL Technical Reference Manual.  Hewlett Packard Product No. 45918A
+ *
+ * A note of thanks to HP for providing and shipping reference materials
+ * free of charge to help in the development of HIL support for Linux.
+ *
+ */
+
+#include <asm/types.h>
+
+/* Physical constants relevant to raw loop/device timing. 
+ */ 
+
+#define HIL_CLOCK		8MHZ
+#define HIL_EK1_CLOCK		30HZ
+#define HIL_EK2_CLOCK		60HZ
+
+#define HIL_TIMEOUT_DEV         5	/* ms */
+#define HIL_TIMEOUT_DEVS	10	/* ms */
+#define HIL_TIMEOUT_NORESP	10	/* ms */
+#define HIL_TIMEOUT_DEVS_DATA	16	/* ms */
+#define HIL_TIMEOUT_SELFTEST	200	/* ms */
+
+
+/* Actual wire line coding.  These will only be useful if someone is 
+ * implementing a software MLC to run HIL devices on a non-parisc machine.
+ */
+
+#define HIL_WIRE_PACKET_LEN	15
+enum hil_wire_bitpos {
+	HIL_WIRE_START		= 0,
+	HIL_WIRE_ADDR2,
+	HIL_WIRE_ADDR1,
+	HIL_WIRE_ADDR0,
+	HIL_WIRE_COMMAND,
+	HIL_WIRE_DATA7,
+	HIL_WIRE_DATA6,
+	HIL_WIRE_DATA5,
+	HIL_WIRE_DATA4,
+	HIL_WIRE_DATA3,
+	HIL_WIRE_DATA2,
+	HIL_WIRE_DATA1,
+	HIL_WIRE_DATA0,
+	HIL_WIRE_PARITY,
+	HIL_WIRE_STOP
+};
+
+/* HP documentation uses these bit positions to refer to commands;
+ * we will call these "packets".
+ */
+enum hil_pkt_bitpos {
+	HIL_PKT_CMD		= 0x00000800,
+	HIL_PKT_ADDR2		= 0x00000400,
+	HIL_PKT_ADDR1		= 0x00000200,
+	HIL_PKT_ADDR0		= 0x00000100,
+	HIL_PKT_ADDR_MASK	= 0x00000700,
+	HIL_PKT_ADDR_SHIFT	= 8,
+	HIL_PKT_DATA7		= 0x00000080,
+	HIL_PKT_DATA6		= 0x00000040,
+	HIL_PKT_DATA5		= 0x00000020,
+	HIL_PKT_DATA4		= 0x00000010,
+	HIL_PKT_DATA3		= 0x00000008,
+	HIL_PKT_DATA2		= 0x00000004,
+	HIL_PKT_DATA1		= 0x00000002,
+	HIL_PKT_DATA0		= 0x00000001,
+	HIL_PKT_DATA_MASK	= 0x000000FF,
+	HIL_PKT_DATA_SHIFT	= 0
+};
+
+/* The HIL MLC also has several error/status/control bits.  We extend the 
+ * "packet" to include these when direct access to the MLC is available,
+ * or emulate them in cases where they are not available. 
+ *
+ * This way the device driver knows that the underlying MLC driver
+ * has had to deal with loop errors.
+ */
+enum hil_error_bitpos {
+	HIL_ERR_OB	= 0x00000800, /* MLC is busy sending an auto-poll, 
+					 or we have filled up the output 
+					 buffer and must wait. */
+	HIL_ERR_INT	= 0x00010000, /* A normal interrupt has occurred. */
+	HIL_ERR_NMI	= 0x00020000, /* An NMI has occurred. */
+	HIL_ERR_LERR	= 0x00040000, /* A poll didn't come back. */
+	HIL_ERR_PERR	= 0x01000000, /* There was a Parity Error. */
+	HIL_ERR_FERR	= 0x02000000, /* There was a Framing Error. */
+	HIL_ERR_FOF	= 0x04000000  /* Input FIFO Overflowed. */
+};
+
+enum hil_control_bitpos {
+	HIL_CTRL_TEST	= 0x00010000,
+	HIL_CTRL_IPF	= 0x00040000,
+	HIL_CTRL_APE	= 0x02000000
+};
+
+/* Bits 30,31 are unused, we use them to control write behavior. */
+#define HIL_DO_ALTER_CTRL  0x40000000 /* Write MSW of packet to control 
+                                          before writing LSW to loop */
+#define HIL_CTRL_ONLY      0xc0000000 /* *Only* alter the control registers */
+
+/* This gives us a 32-bit "packet" 
+ */
+typedef u32 hil_packet;
+
+
+/* HIL Loop commands 
+ */
+enum hil_command {
+	HIL_CMD_IFC	= 0x00,	/* Interface Clear */
+	HIL_CMD_EPT	= 0x01,	/* Enter Pass-Thru Mode */
+	HIL_CMD_ELB	= 0x02,	/* Enter Loop-Back Mode */
+	HIL_CMD_IDD	= 0x03,	/* Identify and Describe */
+	HIL_CMD_DSR	= 0x04,	/* Device Soft Reset */
+	HIL_CMD_PST	= 0x05,	/* Perform Self Test */
+	HIL_CMD_RRG	= 0x06,	/* Read Register */
+	HIL_CMD_WRG	= 0x07,	/* Write Register */
+	HIL_CMD_ACF	= 0x08,	/* Auto Configure */
+	HIL_CMDID_ACF	= 0x07,	/* Auto Configure bits with incremented ID */
+	HIL_CMD_POL	= 0x10,	/* Poll */
+	HIL_CMDCT_POL	= 0x0f,	/* Poll command bits with item count  */
+	HIL_CMD_RPL	= 0x20,	/* RePoll */
+	HIL_CMDCT_RPL	= 0x0f,	/* RePoll command bits with item count */
+	HIL_CMD_RNM	= 0x30,	/* Report Name */
+	HIL_CMD_RST	= 0x31,	/* Report Status */
+	HIL_CMD_EXD	= 0x32,	/* Extended Describe */
+	HIL_CMD_RSC	= 0x33,	/* Report Security Code */
+
+	/* 0x34 to 0x3c reserved for future use  */
+
+	HIL_CMD_DKA	= 0x3d,	/* Disable Keyswitch Autorepeat */
+	HIL_CMD_EK1	= 0x3e,	/* Enable Keyswitch Autorepeat 1 */
+	HIL_CMD_EK2	= 0x3f,	/* Enable Keyswitch Autorepeat 2 */
+	HIL_CMD_PR1	= 0x40,	/* Prompt1 */  
+	HIL_CMD_PR2	= 0x41,	/* Prompt2 */
+	HIL_CMD_PR3	= 0x42,	/* Prompt3 */
+	HIL_CMD_PR4	= 0x43,	/* Prompt4 */
+	HIL_CMD_PR5	= 0x44,	/* Prompt5 */
+	HIL_CMD_PR6	= 0x45,	/* Prompt6 */
+	HIL_CMD_PR7	= 0x46,	/* Prompt7 */
+	HIL_CMD_PRM	= 0x47,	/* Prompt (General Purpose) */
+	HIL_CMD_AK1	= 0x48,	/* Acknowledge1 */  
+	HIL_CMD_AK2	= 0x49,	/* Acknowledge2 */
+	HIL_CMD_AK3	= 0x4a,	/* Acknowledge3 */
+	HIL_CMD_AK4	= 0x4b,	/* Acknowledge4 */
+	HIL_CMD_AK5	= 0x4c,	/* Acknowledge5 */
+	HIL_CMD_AK6	= 0x4d,	/* Acknowledge6 */
+	HIL_CMD_AK7	= 0x4e,	/* Acknowledge7 */
+	HIL_CMD_ACK	= 0x4f,	/* Acknowledge (General Purpose) */
+
+	/* 0x50 to 0x78 reserved for future use  */
+	/* 0x80 to 0xEF device-specific commands */
+	/* 0xf0 to 0xf9 reserved for future use  */
+
+	HIL_CMD_RIO	= 0xfa,	/* Register I/O Error */
+	HIL_CMD_SHR	= 0xfb,	/* System Hard Reset */
+	HIL_CMD_TER	= 0xfc,	/* Transmission Error */
+	HIL_CMD_CAE	= 0xfd,	/* Configuration Address Error */
+	HIL_CMD_DHR	= 0xfe,	/* Device Hard Reset */
+
+	/* 0xff is prohibited from use. */
+};
+
+
+/* 
+ * Response "records" to HIL commands
+ */
+
+/* Device ID byte 
+ */
+#define HIL_IDD_DID_TYPE_MASK		0xe0	/* Primary type bits */
+#define HIL_IDD_DID_TYPE_KB_INTEGRAL	0xa0	/* Integral keyboard */
+#define HIL_IDD_DID_TYPE_KB_ITF		0xc0	/* ITD keyboard */
+#define HIL_IDD_DID_TYPE_KB_RSVD	0xe0	/* Reserved keyboard type */
+#define HIL_IDD_DID_TYPE_KB_LANG_MASK	0x1f	/* Keyboard locale bits */
+#define HIL_IDD_DID_KBLANG_USE_ESD	0x00	/* Use ESD Locale instead */
+#define HIL_IDD_DID_TYPE_ABS		0x80    /* Absolute Positioners */
+#define HIL_IDD_DID_ABS_RSVD1_MASK	0xf8	/* Reserved */
+#define HIL_IDD_DID_ABS_RSVD1		0x98
+#define HIL_IDD_DID_ABS_TABLET_MASK	0xf8	/* Tablets and digitizers */
+#define HIL_IDD_DID_ABS_TABLET		0x90
+#define HIL_IDD_DID_ABS_TSCREEN_MASK	0xfc	/* Touch screens */
+#define HIL_IDD_DID_ABS_TSCREEN		0x8c
+#define HIL_IDD_DID_ABS_RSVD2_MASK	0xfc	/* Reserved */
+#define HIL_IDD_DID_ABS_RSVD2		0x88
+#define HIL_IDD_DID_ABS_RSVD3_MASK	0xfc	/* Reserved */
+#define HIL_IDD_DID_ABS_RSVD3		0x80
+#define HIL_IDD_DID_TYPE_REL		0x60    /* Relative Positioners */
+#define HIL_IDD_DID_REL_RSVD1_MASK	0xf0	/* Reserved */
+#define HIL_IDD_DID_REL_RSVD1		0x70
+#define HIL_IDD_DID_REL_RSVD2_MASK	0xfc	/* Reserved */
+#define HIL_IDD_DID_REL_RSVD2		0x6c
+#define HIL_IDD_DID_REL_MOUSE_MASK	0xfc	/* Mouse */
+#define HIL_IDD_DID_REL_MOUSE		0x68
+#define HIL_IDD_DID_REL_QUAD_MASK	0xf8	/* Other Quadrature Devices */
+#define HIL_IDD_DID_REL_QUAD		0x60
+#define HIL_IDD_DID_TYPE_CHAR		0x40    /* Character Entry */
+#define HIL_IDD_DID_CHAR_BARCODE_MASK	0xfc	/* Barcode Reader */
+#define HIL_IDD_DID_CHAR_BARCODE	0x5c
+#define HIL_IDD_DID_CHAR_RSVD1_MASK	0xfc	/* Reserved */
+#define HIL_IDD_DID_CHAR_RSVD1		0x58
+#define HIL_IDD_DID_CHAR_RSVD2_MASK	0xf8	/* Reserved */
+#define HIL_IDD_DID_CHAR_RSVD2		0x50
+#define HIL_IDD_DID_CHAR_RSVD3_MASK	0xf0	/* Reserved */
+#define HIL_IDD_DID_CHAR_RSVD3		0x40
+#define HIL_IDD_DID_TYPE_OTHER		0x20    /* Miscellaneous */
+#define HIL_IDD_DID_OTHER_RSVD1_MASK	0xf0	/* Reserved */
+#define HIL_IDD_DID_OTHER_RSVD1		0x30
+#define HIL_IDD_DID_OTHER_BARCODE_MASK	0xfc	/* Tone Generator */
+#define HIL_IDD_DID_OTHER_BARCODE	0x2c
+#define HIL_IDD_DID_OTHER_RSVD2_MASK	0xfc	/* Reserved */
+#define HIL_IDD_DID_OTHER_RSVD2		0x28
+#define HIL_IDD_DID_OTHER_RSVD3_MASK	0xf8	/* Reserved */
+#define HIL_IDD_DID_OTHER_RSVD3		0x20
+#define HIL_IDD_DID_TYPE_KEYPAD		0x00	/* Vectra Keyboard */
+
+/* IDD record header 
+ */
+#define HIL_IDD_HEADER_AXSET_MASK	0x03    /* Number of axis in a set */
+#define HIL_IDD_HEADER_RSC		0x04	/* Supports RSC command */
+#define HIL_IDD_HEADER_EXD		0x08	/* Supports EXD command */
+#define HIL_IDD_HEADER_IOD		0x10	/* IOD byte to follow */
+#define HIL_IDD_HEADER_16BIT		0x20	/* 16 (vs. 8) bit resolution */
+#define HIL_IDD_HEADER_ABS		0x40	/* Reports Absolute Position */
+#define HIL_IDD_HEADER_2X_AXIS		0x80	/* Two sets of 1-3 axis */
+
+/* I/O Descriptor
+ */
+#define HIL_IDD_IOD_NBUTTON_MASK	0x07	/* Number of buttons */
+#define HIL_IDD_IOD_PROXIMITY		0x08	/* Proximity in/out events */
+#define HIL_IDD_IOD_PROMPT_MASK		0x70	/* Number of prompts/acks */
+#define HIL_IDD_IOD_PROMPT_SHIFT	4
+#define HIL_IDD_IOD_PROMPT		0x80	/* Generic prompt/ack */
+
+#define HIL_IDD_NUM_AXES_PER_SET(header_packet) \
+((header_packet) & HIL_IDD_HEADER_AXSET_MASK)
+
+#define HIL_IDD_NUM_AXSETS(header_packet) \
+(2 - !((header_packet) & HIL_IDD_HEADER_2X_AXIS))
+
+#define HIL_IDD_LEN(header_packet) \
+((4 - !(header_packet & HIL_IDD_HEADER_IOD) -			\
+  2 * !(HIL_IDD_NUM_AXES_PER_SET(header_packet))) +		\
+  2 * HIL_IDD_NUM_AXES_PER_SET(header_packet) *			\
+ !!((header_packet) & HIL_IDD_HEADER_ABS))
+
+/* The following HIL_IDD_* macros assume you have an array of 
+ * packets and/or unpacked 8-bit data in the order that they 
+ * were received.
+ */
+
+#define HIL_IDD_AXIS_COUNTS_PER_M(header_ptr) \
+(!(HIL_IDD_NUM_AXSETS(*(header_ptr))) ? -1 :			\
+(((*(header_ptr + 1) & HIL_PKT_DATA_MASK) +			\
+  ((*(header_ptr + 2) & HIL_PKT_DATA_MASK)) << 8)		\
+* ((*(header_ptr) & HIL_IDD_HEADER_16BIT) ? 100 : 1)))
+
+#define HIL_IDD_AXIS_MAX(header_ptr, __axnum) \
+((!(*(header_ptr) & HIL_IDD_HEADER_ABS) ||			\
+  (HIL_IDD_NUM_AXES_PER_SET(*(header_ptr)) <= __axnum)) ? 0 :	\
+ ((HIL_PKT_DATA_MASK & *((header_ptr) + 3 + 2 * __axnum)) +	\
+  ((HIL_PKT_DATA_MASK & *((header_ptr) + 4 + 2 * __axnum)) << 8)))
+
+#define HIL_IDD_IOD(header_ptr) \
+(*(header_ptr + HIL_IDD_LEN((*header_ptr)) - 1))
+
+#define HIL_IDD_HAS_GEN_PROMPT(header_ptr) \
+((*header_ptr & HIL_IDD_HEADER_IOD) &&				\
+ (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_PROMPT))
+
+#define HIL_IDD_HAS_GEN_PROXIMITY(header_ptr) \
+((*header_ptr & HIL_IDD_HEADER_IOD) &&				\
+ (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_PROXIMITY))
+
+#define HIL_IDD_NUM_BUTTONS(header_ptr) \
+((*header_ptr & HIL_IDD_HEADER_IOD) ?				\
+ (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_NBUTTON_MASK) : 0)
+
+#define HIL_IDD_NUM_PROMPTS(header_ptr) \
+((*header_ptr & HIL_IDD_HEADER_IOD) ?				\
+ ((HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_NPROMPT_MASK)		\
+  >> HIL_IDD_IOD_PROMPT_SHIFT) : 0)
+
+/* The response to HIL EXD commands -- the "extended describe record" */
+#define	HIL_EXD_HEADER_WRG		0x03	/* Supports type2 WRG */
+#define HIL_EXD_HEADER_WRG_TYPE1	0x01	/* Supports type1 WRG */
+#define	HIL_EXD_HEADER_WRG_TYPE2	0x02	/* Supports type2 WRG */
+#define	HIL_EXD_HEADER_RRG		0x04	/* Supports RRG command */
+#define	HIL_EXD_HEADER_RNM		0x10	/* Supports RNM command */
+#define HIL_EXD_HEADER_RST		0x20	/* Supports RST command */
+#define HIL_EXD_HEADER_LOCALE		0x40	/* Contains locale code */
+
+#define HIL_EXD_NUM_RRG(header_ptr) \
+((*header_ptr & HIL_EXD_HEADER_RRG) ? \
+ (*(header_ptr + 1) & HIL_PKT_DATA_MASK) : 0)
+
+#define HIL_EXD_NUM_WWG(header_ptr) \
+((*header_ptr & HIL_EXD_HEADER_WRG) ?				\
+ (*(header_ptr + 2 - !(*header_ptr & HIL_EXD_HEADER_RRG)) &	\
+    HIL_PKT_DATA_MASK) : 0)
+
+#define HIL_EXD_LEN(header_ptr) \
+(!!(*header_ptr & HIL_EXD_HEADER_RRG) +				\
+ !!(*header_ptr & HIL_EXD_HEADER_WRG) +				\
+ !!(*header_ptr & HIL_EXD_HEADER_LOCALE) +			\
+ 2 * !!(*header_ptr & HIL_EXD_HEADER_WRG_TYPE2) + 1)
+
+#define HIL_EXD_LOCALE(header_ptr) \
+(!(*header_ptr & HIL_EXD_HEADER_LOCALE) ? -1 :			\
+ (*(header_ptr + HIL_EXD_LEN(header_ptr) - 1) & HIL_PKT_DATA_MASK))
+
+#define HIL_EXD_WRG_TYPE2_LEN(header_ptr) \
+(!(*header_ptr & HIL_EXD_HEADER_WRG_TYPE2) ? -1	:			\
+ (*(header_ptr + HIL_EXD_LEN(header_ptr) - 2 -                  	\
+    !!(*header_ptr & HIL_EXD_HEADER_LOCALE)) & HIL_PKT_DATA_MASK) +	\
+ ((*(header_ptr + HIL_EXD_LEN(header_ptr) - 1 -				\
+     !!(*header_ptr & HIL_EXD_HEADER_LOCALE)) & HIL_PKT_DATA_MASK) << 8))
+
+/* Device locale codes. */ 
+
+/* Last defined locale code.  Everything above this is "Reserved",
+   and note that this same table applies to the Device ID Byte where 
+   keyboards may have a nationality code which is only 5 bits. */
+#define HIL_LOCALE_MAX 0x1f
+
+/* Map to hopefully useful strings.  I was trying to make these look
+   like locale.aliases strings do; maybe that isn't the right table to
+   emulate.  In either case, I didn't have much to work on. */
+#define HIL_LOCALE_MAP \
+"",			/* 0x00 Reserved */		\
+"",			/* 0x01 Reserved */		\
+"",			/* 0x02 Reserved */		\
+"swiss.french",		/* 0x03 Swiss/French */		\
+"portuguese",		/* 0x04 Portuguese */		\
+"arabic",		/* 0x05 Arabic */		\
+"hebrew",		/* 0x06 Hebrew */		\
+"english.canadian",	/* 0x07 Canadian English */	\
+"turkish",		/* 0x08 Turkish */		\
+"greek",		/* 0x09 Greek */		\
+"thai",			/* 0x0a Thai (Thailand) */	\
+"italian",		/* 0x0b Italian */		\
+"korean",		/* 0x0c Hangul (Korea) */	\
+"dutch",		/* 0x0d Dutch */		\
+"swedish",		/* 0x0e Swedish */		\
+"german",		/* 0x0f German */		\
+"chinese",		/* 0x10 Chinese-PRC */		\
+"chinese",		/* 0x11 Chinese-ROC */		\
+"swiss.french",		/* 0x12 Swiss/French II */	\
+"spanish",		/* 0x13 Spanish */		\
+"swiss.german",		/* 0x14 Swiss/German II */	\
+"flemish",		/* 0x15 Belgian (Flemish) */	\
+"finnish",		/* 0x16 Finnish	*/		\
+"english.uk",		/* 0x17 United Kingdom */	\
+"french.canadian",	/* 0x18 French/Canadian */	\
+"swiss.german",		/* 0x19 Swiss/German */		\
+"norwegian",		/* 0x1a Norwegian */		\
+"french",		/* 0x1b French */		\
+"danish",		/* 0x1c Danish */		\
+"japanese",		/* 0x1d Katakana */		\
+"spanish",		/* 0x1e Latin American/Spanish*/\
+"english.us"		/* 0x1f United States */	\
+
+
+/* HIL keycodes */
+#define HIL_KEYCODES_SET1_TBLSIZE 128
+#define HIL_KEYCODES_SET1 	\
+   KEY_5,		KEY_RESERVED,	KEY_RIGHTALT,	KEY_LEFTALT,	\
+   KEY_RIGHTSHIFT,	KEY_LEFTSHIFT,	KEY_LEFTCTRL,	KEY_SYSRQ,	\
+   KEY_KP4,		KEY_KP8,	KEY_KP5,	KEY_KP9,	\
+   KEY_KP6,		KEY_KP7,	KEY_KPCOMMA,	KEY_KPENTER,	\
+   KEY_KP1,		KEY_KPSLASH,	KEY_KP2,	KEY_KPPLUS,	\
+   KEY_KP3,		KEY_KPASTERISK,	KEY_KP0,	KEY_KPMINUS,	\
+   KEY_B,		KEY_V,		KEY_C,		KEY_X,		\
+   KEY_Z,		KEY_RESERVED,	KEY_RESERVED,   KEY_ESC,	\
+   KEY_6,		KEY_F10,	KEY_3,		KEY_F11,	\
+   KEY_KPDOT,		KEY_F9,		KEY_TAB /*KP*/,	KEY_F12,	\
+   KEY_H,		KEY_G,		KEY_F,		KEY_D,		\
+   KEY_S,		KEY_A,		KEY_RESERVED,	KEY_CAPSLOCK,	\
+   KEY_U,		KEY_Y,		KEY_T,		KEY_R,		\
+   KEY_E,		KEY_W,		KEY_Q,		KEY_TAB,	\
+   KEY_7,		KEY_6,		KEY_5,		KEY_4,		\
+   KEY_3,		KEY_2,		KEY_1,		KEY_GRAVE,	\
+   KEY_F13,		KEY_F14,	KEY_F15,	KEY_F16,	\
+   KEY_F17,		KEY_F18,	KEY_F19,	KEY_F20,	\
+   KEY_MENU,		KEY_F4,		KEY_F3,		KEY_F2,		\
+   KEY_F1,		KEY_VOLUMEUP,	KEY_STOP,	KEY_SENDFILE,	\
+   KEY_SYSRQ,		KEY_F5,		KEY_F6,		KEY_F7,		\
+   KEY_F8,		KEY_VOLUMEDOWN,	KEY_DEL_EOL,	KEY_DEL_EOS,	\
+   KEY_8,		KEY_9,		KEY_0,		KEY_MINUS,	\
+   KEY_EQUAL,		KEY_BACKSPACE,	KEY_INS_LINE,	KEY_DEL_LINE,	\
+   KEY_I,		KEY_O,		KEY_P,		KEY_LEFTBRACE,	\
+   KEY_RIGHTBRACE,	KEY_BACKSLASH,	KEY_INSERT,	KEY_DELETE,	\
+   KEY_J,		KEY_K,		KEY_L,		KEY_SEMICOLON,	\
+   KEY_APOSTROPHE,	KEY_ENTER,	KEY_HOME,	KEY_PAGEUP,	\
+   KEY_M,		KEY_COMMA,	KEY_DOT,	KEY_SLASH,	\
+   KEY_BACKSLASH,	KEY_SELECT,	KEY_102ND,	KEY_PAGEDOWN,	\
+   KEY_N,		KEY_SPACE,	KEY_NEXT,	KEY_RESERVED,	\
+   KEY_LEFT,		KEY_DOWN,	KEY_UP,		KEY_RIGHT
+
+
+#define HIL_KEYCODES_SET3_TBLSIZE 128
+#define HIL_KEYCODES_SET3 	\
+  KEY_RESERVED,	KEY_ESC,	KEY_1,		KEY_2,			\
+  KEY_3,	KEY_4,		KEY_5,		KEY_6,			\
+  KEY_7,	KEY_8,		KEY_9,		KEY_0,			\
+  KEY_MINUS,	KEY_EQUAL,	KEY_BACKSPACE,	KEY_TAB,		\
+  KEY_Q,	KEY_W,		KEY_E,		KEY_R,			\
+  KEY_T,	KEY_Y,		KEY_U,		KEY_I,			\
+  KEY_O,	KEY_P,		KEY_LEFTBRACE,	KEY_RIGHTBRACE,		\
+  KEY_ENTER,	KEY_LEFTCTRL,	KEY_A,		KEY_S,			\
+  KEY_D,	KEY_F,		KEY_G,		KEY_H,			\
+  KEY_J,	KEY_K,		KEY_L,		KEY_SEMICOLON,		\
+  KEY_APOSTROPHE,KEY_GRAVE,	KEY_LEFTSHIFT,	KEY_BACKSLASH,		\
+  KEY_Z,	KEY_X,		KEY_C,		KEY_V,			\
+  KEY_B,	KEY_N,		KEY_M,		KEY_COMMA,		\
+  KEY_DOT,	KEY_SLASH,	KEY_RIGHTSHIFT,	KEY_KPASTERISK,		\
+  KEY_LEFTALT,	KEY_SPACE,	KEY_CAPSLOCK,	KEY_F1,			\
+  KEY_F2,	KEY_F3,		KEY_F4,		KEY_F5,			\
+  KEY_F6,	KEY_F7,		KEY_F8,		KEY_F9,			\
+  KEY_F10,	KEY_NUMLOCK,	KEY_SCROLLLOCK,	KEY_KP7,		\
+  KEY_KP8,	KEY_KP9,	KEY_KPMINUS,	KEY_KP4,		\
+  KEY_KP5,	KEY_KP6,	KEY_KPPLUS,	KEY_KP1,		\
+  KEY_KP2,	KEY_KP3,	KEY_KP0,	KEY_KPDOT,		\
+  KEY_SYSRQ,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,		\
+  KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,		\
+  KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,		\
+  KEY_UP,	KEY_LEFT,	KEY_DOWN,	KEY_RIGHT,		\
+  KEY_HOME,	KEY_PAGEUP,	KEY_END,	KEY_PAGEDOWN,		\
+  KEY_INSERT,	KEY_DELETE,	KEY_102ND,	KEY_RESERVED,		\
+  KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,		\
+  KEY_F1,	KEY_F2,		KEY_F3,		KEY_F4,			\
+  KEY_F5,	KEY_F6,		KEY_F7,		KEY_F8,			\
+  KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,		\
+  KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED
+
+
+/* Response to POL command, the "poll record header" */
+
+#define HIL_POL_NUM_AXES_MASK	0x03	/* Number of axis reported */
+#define HIL_POL_CTS		0x04	/* Device ready to receive data */
+#define HIL_POL_STATUS_PENDING	0x08	/* Device has status to report */
+#define HIL_POL_CHARTYPE_MASK	0x70	/* Type of character data to follow */
+#define HIL_POL_CHARTYPE_NONE	0x00	/* No character data to follow */
+#define HIL_POL_CHARTYPE_RSVD1	0x10	/* Reserved Set 1 */
+#define HIL_POL_CHARTYPE_ASCII	0x20	/* U.S. ASCII */
+#define HIL_POL_CHARTYPE_BINARY	0x30	/* Binary data */
+#define HIL_POL_CHARTYPE_SET1	0x40	/* Keycode Set 1 */
+#define HIL_POL_CHARTYPE_RSVD2	0x50	/* Reserved Set 2 */
+#define HIL_POL_CHARTYPE_SET2	0x60	/* Keycode Set 2 */
+#define HIL_POL_CHARTYPE_SET3	0x70	/* Keycode Set 3 */
+#define HIL_POL_AXIS_ALT	0x80	/* Data is from axis set 2 */
+
+
+#endif /* _HIL_H_ */
diff --git a/include/linux/hil_mlc.h b/include/linux/hil_mlc.h
new file mode 100644
index 00000000..394a8405
--- /dev/null
+++ b/include/linux/hil_mlc.h
@@ -0,0 +1,168 @@
+/*
+ * HP Human Interface Loop Master Link Controller driver.
+ *
+ * Copyright (c) 2001 Brian S. Julin
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL").
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ *
+ * References:
+ * HP-HIL Technical Reference Manual.  Hewlett Packard Product No. 45918A
+ *
+ */
+
+#include <linux/hil.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <linux/semaphore.h>
+#include <linux/serio.h>
+#include <linux/list.h>
+
+typedef struct hil_mlc hil_mlc;
+
+/* The HIL has a complicated state engine.
+ * We define the structure of nodes in the state engine here.
+ */
+enum hilse_act {
+  	/* HILSE_OUT prepares to receive input if the next node
+	 * is an IN or EXPECT, and then sends the given packet.
+	 */
+	HILSE_OUT = 0,
+
+  	/* HILSE_CTS checks if the loop is busy. */
+	HILSE_CTS,
+
+	/* HILSE_OUT_LAST sends the given command packet to 
+	 * the last configured/running device on the loop.
+	 */
+	HILSE_OUT_LAST,
+
+	/* HILSE_OUT_DISC sends the given command packet to
+	 * the next device past the last configured/running one.
+	 */
+	HILSE_OUT_DISC,
+
+	/* HILSE_FUNC runs a callback function with given arguments.
+	 * a positive return value causes the "ugly" branch to be taken.
+	 */
+	HILSE_FUNC,
+
+  	/* HILSE_IN simply expects any non-errored packet to arrive 
+	 * within arg usecs.
+	 */
+	HILSE_IN		= 0x100,
+
+  	/* HILSE_EXPECT expects a particular packet to arrive 
+	 * within arg usecs, any other packet is considered an error.
+	 */
+	HILSE_EXPECT,
+
+  	/* HILSE_EXPECT_LAST as above but dev field should be last 
+	 * discovered/operational device.
+	 */
+	HILSE_EXPECT_LAST,
+
+  	/* HILSE_EXPECT_LAST as above but dev field should be first 
+	 * undiscovered/inoperational device.
+	 */
+	HILSE_EXPECT_DISC
+};
+
+typedef int	(hilse_func) (hil_mlc *mlc, int arg);
+struct hilse_node {
+	enum hilse_act		act;	/* How to process this node         */
+	union {
+		hilse_func	*func;	/* Function to call if HILSE_FUNC   */
+		hil_packet	packet;	/* Packet to send or to compare     */
+	} object;
+	int			arg;	/* Timeout in usec or parm for func */
+	int			good;	/* Node to jump to on success       */
+	int			bad;	/* Node to jump to on error         */
+	int			ugly;	/* Node to jump to on timeout       */
+};
+
+/* Methods for back-end drivers, e.g. hp_sdc_mlc */
+typedef int	(hil_mlc_cts) (hil_mlc *mlc);
+typedef void	(hil_mlc_out) (hil_mlc *mlc);
+typedef int	(hil_mlc_in)  (hil_mlc *mlc, suseconds_t timeout);
+
+struct hil_mlc_devinfo {
+	uint8_t	idd[16];	/* Device ID Byte and Describe Record */
+	uint8_t	rsc[16];	/* Security Code Header and Record */
+	uint8_t	exd[16];	/* Extended Describe Record */
+	uint8_t	rnm[16];	/* Device name as returned by RNM command */
+};
+
+struct hil_mlc_serio_map {
+	hil_mlc *mlc;
+	int di_revmap;
+	int didx;
+};
+
+/* How many (possibly old/detached) devices the we try to keep track of */
+#define HIL_MLC_DEVMEM 16
+
+struct hil_mlc {
+	struct list_head	list;	/* hil_mlc is organized as linked list */
+
+	rwlock_t		lock;
+
+	void *priv; /* Data specific to a particular type of MLC */
+
+	int 			seidx;	/* Current node in state engine */
+	int			istarted, ostarted;
+
+	hil_mlc_cts		*cts;
+	struct semaphore	csem;   /* Raised when loop idle */
+
+	hil_mlc_out		*out;
+	struct semaphore	osem;   /* Raised when outpacket dispatched */
+	hil_packet		opacket;
+
+	hil_mlc_in		*in;
+	struct semaphore	isem;   /* Raised when a packet arrives */
+	hil_packet		ipacket[16];
+	hil_packet		imatch;
+	int			icount;
+	struct timeval		instart;
+	suseconds_t		intimeout;
+
+	int			ddi;	/* Last operational device id */
+	int			lcv;	/* LCV to throttle loops */
+	struct timeval		lcv_tv; /* Time loop was started */
+
+	int			di_map[7]; /* Maps below items to live devs */
+	struct hil_mlc_devinfo	di[HIL_MLC_DEVMEM];
+	struct serio		*serio[HIL_MLC_DEVMEM];
+	struct hil_mlc_serio_map serio_map[HIL_MLC_DEVMEM];
+	hil_packet		serio_opacket[HIL_MLC_DEVMEM];
+	int			serio_oidx[HIL_MLC_DEVMEM];
+	struct hil_mlc_devinfo	di_scratch; /* Temporary area */
+
+	int			opercnt;
+
+	struct tasklet_struct	*tasklet;
+};
+
+int hil_mlc_register(hil_mlc *mlc);
+int hil_mlc_unregister(hil_mlc *mlc);
diff --git a/include/linux/hippidevice.h b/include/linux/hippidevice.h
new file mode 100644
index 00000000..f148e490
--- /dev/null
+++ b/include/linux/hippidevice.h
@@ -0,0 +1,41 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the HIPPI handlers.
+ *
+ * Version:	@(#)hippidevice.h	1.0.0	05/26/97
+ *
+ * Author:	Jes Sorensen, <Jes.Sorensen@cern.ch>
+ *
+ *		hippidevice.h is based on previous fddidevice.h work by
+ *			Ross Biro
+ *			Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *			Alan Cox, <gw4pts@gw4pts.ampr.org>
+ *			Lawrence V. Stefani, <stefani@lkg.dec.com>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_HIPPIDEVICE_H
+#define _LINUX_HIPPIDEVICE_H
+
+#include <linux/if_hippi.h>
+
+#ifdef __KERNEL__
+
+struct hippi_cb {
+	__u32	ifield;
+};
+
+extern __be16 hippi_type_trans(struct sk_buff *skb, struct net_device *dev);
+extern int hippi_change_mtu(struct net_device *dev, int new_mtu);
+extern int hippi_mac_addr(struct net_device *dev, void *p);
+extern int hippi_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p);
+extern struct net_device *alloc_hippi_dev(int sizeof_priv);
+#endif
+
+#endif	/* _LINUX_HIPPIDEVICE_H */
diff --git a/include/linux/hp_sdc.h b/include/linux/hp_sdc.h
new file mode 100644
index 00000000..d392975d
--- /dev/null
+++ b/include/linux/hp_sdc.h
@@ -0,0 +1,301 @@
+/*
+ * HP i8042 System Device Controller -- header
+ *
+ * Copyright (c) 2001 Brian S. Julin
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL").
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ *
+ * References:
+ * 
+ * HP-HIL Technical Reference Manual.  Hewlett Packard Product No. 45918A
+ *
+ * System Device Controller Microprocessor Firmware Theory of Operation
+ * 	for Part Number 1820-4784 Revision B.  Dwg No. A-1820-4784-2
+ *
+ */
+
+#ifndef _LINUX_HP_SDC_H
+#define _LINUX_HP_SDC_H
+
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#if defined(__hppa__)
+#include <asm/hardware.h>
+#endif
+
+
+/* No 4X status reads take longer than this (in usec).
+ */
+#define HP_SDC_MAX_REG_DELAY 20000
+
+typedef void (hp_sdc_irqhook) (int irq, void *dev_id, 
+			       uint8_t status, uint8_t data);
+
+int hp_sdc_request_timer_irq(hp_sdc_irqhook *callback);
+int hp_sdc_request_hil_irq(hp_sdc_irqhook *callback);
+int hp_sdc_request_cooked_irq(hp_sdc_irqhook *callback);
+int hp_sdc_release_timer_irq(hp_sdc_irqhook *callback);
+int hp_sdc_release_hil_irq(hp_sdc_irqhook *callback);
+int hp_sdc_release_cooked_irq(hp_sdc_irqhook *callback);
+
+typedef struct {
+	int actidx;	/* Start of act.  Acts are atomic WRT I/O to SDC */
+	int idx;	/* Index within the act */
+	int endidx;	/* transaction is over and done if idx == endidx */
+	uint8_t *seq;	/* commands/data for the transaction */
+	union {
+	  hp_sdc_irqhook   *irqhook;	/* Callback, isr or tasklet context */
+	  struct semaphore *semaphore;	/* Semaphore to sleep on. */
+	} act;
+} hp_sdc_transaction;
+int __hp_sdc_enqueue_transaction(hp_sdc_transaction *this);
+int hp_sdc_enqueue_transaction(hp_sdc_transaction *this);
+int hp_sdc_dequeue_transaction(hp_sdc_transaction *this);
+
+/* The HP_SDC_ACT* values are peculiar to this driver.
+ * Nuance: never HP_SDC_ACT_DATAIN | HP_SDC_ACT_DEALLOC, use another
+ * act to perform the dealloc.
+ */
+#define HP_SDC_ACT_PRECMD	0x01		/* Send a command first */
+#define HP_SDC_ACT_DATAREG	0x02		/* Set data registers */
+#define HP_SDC_ACT_DATAOUT	0x04		/* Send data bytes */
+#define HP_SDC_ACT_POSTCMD      0x08            /* Send command after */
+#define HP_SDC_ACT_DATAIN	0x10		/* Collect data after */
+#define HP_SDC_ACT_DURING	0x1f
+#define HP_SDC_ACT_SEMAPHORE    0x20            /* Raise semaphore after */
+#define HP_SDC_ACT_CALLBACK	0x40		/* Pass data to IRQ handler */
+#define HP_SDC_ACT_DEALLOC	0x80		/* Destroy transaction after */
+#define HP_SDC_ACT_AFTER	0xe0
+#define HP_SDC_ACT_DEAD		0x60		/* Act timed out. */
+
+/* Rest of the flags are straightforward representation of the SDC interface */
+#define HP_SDC_STATUS_IBF	0x02	/* Input buffer full */
+
+#define HP_SDC_STATUS_IRQMASK	0xf0	/* Bits containing "level 1" irq */
+#define HP_SDC_STATUS_PERIODIC  0x10    /* Periodic 10ms timer */
+#define HP_SDC_STATUS_USERTIMER 0x20    /* "Special purpose" timer */
+#define HP_SDC_STATUS_TIMER     0x30    /* Both PERIODIC and USERTIMER */
+#define HP_SDC_STATUS_REG	0x40	/* Data from an i8042 register */
+#define HP_SDC_STATUS_HILCMD    0x50	/* Command from HIL MLC */
+#define HP_SDC_STATUS_HILDATA   0x60	/* Data from HIL MLC */
+#define HP_SDC_STATUS_PUP	0x70	/* Successful power-up self test */
+#define HP_SDC_STATUS_KCOOKED	0x80	/* Key from cooked kbd */
+#define HP_SDC_STATUS_KRPG	0xc0	/* Key from Repeat Gen */
+#define HP_SDC_STATUS_KMOD_SUP	0x10	/* Shift key is up */
+#define HP_SDC_STATUS_KMOD_CUP	0x20	/* Control key is up */
+
+#define HP_SDC_NMISTATUS_FHS	0x40	/* NMI is a fast handshake irq */
+
+/* Internal i8042 registers (there are more, but they are not too useful). */
+
+#define HP_SDC_USE		0x02	/* Resource usage (including OB bit) */
+#define HP_SDC_IM		0x04	/* Interrupt mask */
+#define HP_SDC_CFG		0x11	/* Configuration register */
+#define HP_SDC_KBLANGUAGE	0x12	/* Keyboard language */
+
+#define HP_SDC_D0		0x70	/* General purpose data buffer 0 */
+#define HP_SDC_D1		0x71	/* General purpose data buffer 1 */
+#define HP_SDC_D2		0x72	/* General purpose data buffer 2 */
+#define HP_SDC_D3		0x73	/* General purpose data buffer 3 */
+#define HP_SDC_VT1		0x74	/* Timer for voice 1 */
+#define HP_SDC_VT2		0x75	/* Timer for voice 2 */
+#define HP_SDC_VT3		0x76	/* Timer for voice 3 */
+#define HP_SDC_VT4		0x77	/* Timer for voice 4 */
+#define HP_SDC_KBN		0x78	/* Which HIL devs are Nimitz */
+#define HP_SDC_KBC		0x79	/* Which HIL devs are cooked kbds */
+#define HP_SDC_LPS		0x7a	/* i8042's view of HIL status */
+#define HP_SDC_LPC		0x7b	/* i8042's view of HIL "control" */
+#define HP_SDC_RSV  		0x7c	/* Reserved "for testing" */
+#define HP_SDC_LPR		0x7d    /* i8042 count of HIL reconfigs */
+#define HP_SDC_XTD		0x7e    /* "Extended Configuration" register */
+#define HP_SDC_STR		0x7f    /* i8042 self-test result */
+
+/* Bitfields for above registers */
+#define HP_SDC_USE_LOOP		0x04	/* Command is currently on the loop. */
+
+#define HP_SDC_IM_MASK          0x1f    /* these bits not part of cmd/status */
+#define HP_SDC_IM_FH		0x10	/* Mask the fast handshake irq */
+#define HP_SDC_IM_PT		0x08	/* Mask the periodic timer irq */
+#define HP_SDC_IM_TIMERS	0x04	/* Mask the MT/DT/CT irq */
+#define HP_SDC_IM_RESET		0x02	/* Mask the reset key irq */
+#define HP_SDC_IM_HIL		0x01	/* Mask the HIL MLC irq */
+
+#define HP_SDC_CFG_ROLLOVER	0x08	/* WTF is "N-key rollover"? */
+#define HP_SDC_CFG_KBD		0x10	/* There is a keyboard */
+#define HP_SDC_CFG_NEW		0x20	/* Supports/uses HIL MLC */
+#define HP_SDC_CFG_KBD_OLD	0x03	/* keyboard code for non-HIL */
+#define HP_SDC_CFG_KBD_NEW	0x07	/* keyboard code from HIL autoconfig */
+#define HP_SDC_CFG_REV		0x40	/* Code revision bit */
+#define HP_SDC_CFG_IDPROM	0x80	/* IDPROM present in kbd (not HIL) */
+
+#define HP_SDC_LPS_NDEV		0x07	/* # devices autoconfigured on HIL */
+#define HP_SDC_LPS_ACSUCC	0x08	/* loop autoconfigured successfully */
+#define HP_SDC_LPS_ACFAIL	0x80	/* last loop autoconfigure failed */
+
+#define HP_SDC_LPC_APE_IPF	0x01	/* HIL MLC APE/IPF (autopoll) set */
+#define HP_SDC_LPC_ARCONERR	0x02	/* i8042 autoreconfigs loop on err */
+#define HP_SDC_LPC_ARCQUIET	0x03	/* i8042 doesn't report autoreconfigs*/
+#define HP_SDC_LPC_COOK		0x10	/* i8042 cooks devices in _KBN */
+#define HP_SDC_LPC_RC		0x80	/* causes autoreconfig */
+
+#define HP_SDC_XTD_REV		0x07	/* contains revision code */
+#define HP_SDC_XTD_REV_STRINGS(val, str) \
+switch (val) {						\
+	case 0x1: str = "1820-3712"; break;		\
+	case 0x2: str = "1820-4379"; break;		\
+	case 0x3: str = "1820-4784"; break;		\
+	default: str = "unknown";			\
+};
+#define HP_SDC_XTD_BEEPER	0x08	/* TI SN76494 beeper available */
+#define HP_SDC_XTD_BBRTC	0x20	/* OKI MSM-58321 BBRTC present */
+
+#define HP_SDC_CMD_LOAD_RT	0x31	/* Load real time (from 8042) */
+#define HP_SDC_CMD_LOAD_FHS	0x36	/* Load the fast handshake timer */
+#define HP_SDC_CMD_LOAD_MT	0x38	/* Load the match timer */
+#define HP_SDC_CMD_LOAD_DT	0x3B	/* Load the delay timer */
+#define HP_SDC_CMD_LOAD_CT	0x3E	/* Load the cycle timer */
+
+#define HP_SDC_CMD_SET_IM	0x40    /* 010xxxxx == set irq mask */
+
+/* The documents provided do not explicitly state that all registers betweem 
+ * 0x01 and 0x1f inclusive can be read by sending their register index as a 
+ * command, but this is implied and appears to be the case.
+ */
+#define HP_SDC_CMD_READ_RAM	0x00	/* Load from i8042 RAM (autoinc) */
+#define HP_SDC_CMD_READ_USE	0x02	/* Undocumented! Load from usage reg */
+#define HP_SDC_CMD_READ_IM	0x04	/* Load current interrupt mask */
+#define HP_SDC_CMD_READ_KCC	0x11	/* Load primary kbd config code */
+#define HP_SDC_CMD_READ_KLC	0x12	/* Load primary kbd language code */
+#define HP_SDC_CMD_READ_T1	0x13	/* Load timer output buffer byte 1 */
+#define HP_SDC_CMD_READ_T2	0x14	/* Load timer output buffer byte 1 */
+#define HP_SDC_CMD_READ_T3	0x15	/* Load timer output buffer byte 1 */
+#define HP_SDC_CMD_READ_T4	0x16	/* Load timer output buffer byte 1 */
+#define HP_SDC_CMD_READ_T5	0x17	/* Load timer output buffer byte 1 */
+#define HP_SDC_CMD_READ_D0	0xf0	/* Load from i8042 RAM location 0x70 */
+#define HP_SDC_CMD_READ_D1	0xf1	/* Load from i8042 RAM location 0x71 */
+#define HP_SDC_CMD_READ_D2	0xf2	/* Load from i8042 RAM location 0x72 */
+#define HP_SDC_CMD_READ_D3	0xf3	/* Load from i8042 RAM location 0x73 */
+#define HP_SDC_CMD_READ_VT1	0xf4	/* Load from i8042 RAM location 0x74 */
+#define HP_SDC_CMD_READ_VT2	0xf5	/* Load from i8042 RAM location 0x75 */
+#define HP_SDC_CMD_READ_VT3	0xf6	/* Load from i8042 RAM location 0x76 */
+#define HP_SDC_CMD_READ_VT4	0xf7	/* Load from i8042 RAM location 0x77 */
+#define HP_SDC_CMD_READ_KBN	0xf8	/* Load from i8042 RAM location 0x78 */
+#define HP_SDC_CMD_READ_KBC	0xf9	/* Load from i8042 RAM location 0x79 */
+#define HP_SDC_CMD_READ_LPS	0xfa	/* Load from i8042 RAM location 0x7a */
+#define HP_SDC_CMD_READ_LPC	0xfb	/* Load from i8042 RAM location 0x7b */
+#define HP_SDC_CMD_READ_RSV	0xfc	/* Load from i8042 RAM location 0x7c */
+#define HP_SDC_CMD_READ_LPR	0xfd	/* Load from i8042 RAM location 0x7d */
+#define HP_SDC_CMD_READ_XTD	0xfe	/* Load from i8042 RAM location 0x7e */
+#define HP_SDC_CMD_READ_STR	0xff	/* Load from i8042 RAM location 0x7f */
+
+#define HP_SDC_CMD_SET_ARD	0xA0	/* Set emulated autorepeat delay */
+#define HP_SDC_CMD_SET_ARR	0xA2	/* Set emulated autorepeat rate */
+#define HP_SDC_CMD_SET_BELL	0xA3	/* Set voice 3 params for "beep" cmd */
+#define HP_SDC_CMD_SET_RPGR	0xA6	/* Set "RPG" irq rate (doesn't work) */
+#define HP_SDC_CMD_SET_RTMS	0xAD	/* Set the RTC time (milliseconds) */
+#define HP_SDC_CMD_SET_RTD	0xAF	/* Set the RTC time (days) */
+#define HP_SDC_CMD_SET_FHS	0xB2	/* Set fast handshake timer */
+#define HP_SDC_CMD_SET_MT	0xB4	/* Set match timer */
+#define HP_SDC_CMD_SET_DT	0xB7	/* Set delay timer */
+#define HP_SDC_CMD_SET_CT	0xBA	/* Set cycle timer */
+#define HP_SDC_CMD_SET_RAMP	0xC1	/* Reset READ_RAM autoinc counter */
+#define HP_SDC_CMD_SET_D0	0xe0	/* Load to i8042 RAM location 0x70 */
+#define HP_SDC_CMD_SET_D1	0xe1	/* Load to i8042 RAM location 0x71 */
+#define HP_SDC_CMD_SET_D2	0xe2	/* Load to i8042 RAM location 0x72 */
+#define HP_SDC_CMD_SET_D3	0xe3	/* Load to i8042 RAM location 0x73 */
+#define HP_SDC_CMD_SET_VT1	0xe4	/* Load to i8042 RAM location 0x74 */
+#define HP_SDC_CMD_SET_VT2	0xe5	/* Load to i8042 RAM location 0x75 */
+#define HP_SDC_CMD_SET_VT3	0xe6	/* Load to i8042 RAM location 0x76 */
+#define HP_SDC_CMD_SET_VT4	0xe7	/* Load to i8042 RAM location 0x77 */
+#define HP_SDC_CMD_SET_KBN	0xe8	/* Load to i8042 RAM location 0x78 */
+#define HP_SDC_CMD_SET_KBC	0xe9	/* Load to i8042 RAM location 0x79 */
+#define HP_SDC_CMD_SET_LPS	0xea	/* Load to i8042 RAM location 0x7a */
+#define HP_SDC_CMD_SET_LPC	0xeb	/* Load to i8042 RAM location 0x7b */
+#define HP_SDC_CMD_SET_RSV	0xec	/* Load to i8042 RAM location 0x7c */
+#define HP_SDC_CMD_SET_LPR	0xed	/* Load to i8042 RAM location 0x7d */
+#define HP_SDC_CMD_SET_XTD	0xee	/* Load to i8042 RAM location 0x7e */
+#define HP_SDC_CMD_SET_STR	0xef	/* Load to i8042 RAM location 0x7f */
+
+#define HP_SDC_CMD_DO_RTCW	0xc2	/* i8042 RAM 0x70 --> RTC */
+#define HP_SDC_CMD_DO_RTCR	0xc3	/* RTC[0x70 0:3] --> irq/status/data */
+#define HP_SDC_CMD_DO_BEEP	0xc4	/* i8042 RAM 0x70-74  --> beeper,VT3 */
+#define HP_SDC_CMD_DO_HIL	0xc5	/* i8042 RAM 0x70-73 --> 
+					   HIL MLC R0,R1 i8042 HIL watchdog */
+
+/* Values used to (de)mangle input/output to/from the HIL MLC */
+#define HP_SDC_DATA		0x40	/* Data from an 8042 register */
+#define HP_SDC_HIL_CMD		0x50	/* Data from HIL MLC R1/8042 */
+#define HP_SDC_HIL_R1MASK	0x0f	/* Contents of HIL MLC R1 0:3 */
+#define HP_SDC_HIL_AUTO		0x10	/* Set if POL results from i8042 */   
+#define HP_SDC_HIL_ISERR	0x80	/* Has meaning as in next 4 values */
+#define HP_SDC_HIL_RC_DONE	0x80	/* i8042 auto-configured loop */
+#define HP_SDC_HIL_ERR		0x81	/* HIL MLC R2 had a bit set */
+#define HP_SDC_HIL_TO		0x82	/* i8042 HIL watchdog expired */
+#define HP_SDC_HIL_RC		0x84	/* i8042 is auto-configuring loop */
+#define HP_SDC_HIL_DAT		0x60	/* Data from HIL MLC R0 */
+
+
+typedef struct {
+	rwlock_t	ibf_lock;
+	rwlock_t	lock;		/* user/tasklet lock */
+	rwlock_t	rtq_lock;	/* isr/tasklet lock */
+	rwlock_t	hook_lock;	/* isr/user lock for handler add/del */
+
+	unsigned int	irq, nmi;	/* Our IRQ lines */
+	unsigned long	base_io, status_io, data_io; /* Our IO ports */
+
+	uint8_t		im;		/* Interrupt mask */
+	int		set_im; 	/* Interrupt mask needs to be set. */
+
+	int		ibf;		/* Last known status of IBF flag */
+	uint8_t		wi;		/* current i8042 write index */
+	uint8_t		r7[4];          /* current i8042[0x70 - 0x74] values */
+	uint8_t		r11, r7e;	/* Values from version/revision regs */
+
+	hp_sdc_irqhook	*timer, *reg, *hil, *pup, *cooked;
+
+#define HP_SDC_QUEUE_LEN 16
+	hp_sdc_transaction *tq[HP_SDC_QUEUE_LEN]; /* All pending read/writes */
+
+	int		rcurr, rqty;	/* Current read transact in process */
+	struct timeval	rtv;		/* Time when current read started */
+	int		wcurr;		/* Current write transact in process */
+
+	int		dev_err;	/* carries status from registration */
+#if defined(__hppa__)
+	struct parisc_device	*dev;
+#elif defined(__mc68000__)
+	void		*dev;
+#else
+#error No support for device registration on this arch yet.
+#endif
+
+	struct timer_list kicker;	/* Keeps below task alive */
+	struct tasklet_struct	task;
+
+} hp_i8042_sdc;
+
+#endif /* _LINUX_HP_SDC_H */
diff --git a/include/linux/hpet.h b/include/linux/hpet.h
new file mode 100644
index 00000000..219ca4f6
--- /dev/null
+++ b/include/linux/hpet.h
@@ -0,0 +1,131 @@
+#ifndef	__HPET__
+#define	__HPET__ 1
+
+#include <linux/compiler.h>
+
+#ifdef __KERNEL__
+
+/*
+ * Offsets into HPET Registers
+ */
+
+struct hpet {
+	u64 hpet_cap;		/* capabilities */
+	u64 res0;		/* reserved */
+	u64 hpet_config;	/* configuration */
+	u64 res1;		/* reserved */
+	u64 hpet_isr;		/* interrupt status reg */
+	u64 res2[25];		/* reserved */
+	union {			/* main counter */
+		u64 _hpet_mc64;
+		u32 _hpet_mc32;
+		unsigned long _hpet_mc;
+	} _u0;
+	u64 res3;		/* reserved */
+	struct hpet_timer {
+		u64 hpet_config;	/* configuration/cap */
+		union {		/* timer compare register */
+			u64 _hpet_hc64;
+			u32 _hpet_hc32;
+			unsigned long _hpet_compare;
+		} _u1;
+		u64 hpet_fsb[2];	/* FSB route */
+	} hpet_timers[1];
+};
+
+#define	hpet_mc		_u0._hpet_mc
+#define	hpet_compare	_u1._hpet_compare
+
+#define	HPET_MAX_TIMERS	(32)
+#define	HPET_MAX_IRQ	(32)
+
+/*
+ * HPET general capabilities register
+ */
+
+#define	HPET_COUNTER_CLK_PERIOD_MASK	(0xffffffff00000000ULL)
+#define	HPET_COUNTER_CLK_PERIOD_SHIFT	(32UL)
+#define	HPET_VENDOR_ID_MASK		(0x00000000ffff0000ULL)
+#define	HPET_VENDOR_ID_SHIFT		(16ULL)
+#define	HPET_LEG_RT_CAP_MASK		(0x8000)
+#define	HPET_COUNTER_SIZE_MASK		(0x2000)
+#define	HPET_NUM_TIM_CAP_MASK		(0x1f00)
+#define	HPET_NUM_TIM_CAP_SHIFT		(8ULL)
+
+/*
+ * HPET general configuration register
+ */
+
+#define	HPET_LEG_RT_CNF_MASK		(2UL)
+#define	HPET_ENABLE_CNF_MASK		(1UL)
+
+
+/*
+ * Timer configuration register
+ */
+
+#define	Tn_INT_ROUTE_CAP_MASK		(0xffffffff00000000ULL)
+#define	Tn_INT_ROUTE_CAP_SHIFT		(32UL)
+#define	Tn_FSB_INT_DELCAP_MASK		(0x8000UL)
+#define	Tn_FSB_INT_DELCAP_SHIFT		(15)
+#define	Tn_FSB_EN_CNF_MASK		(0x4000UL)
+#define	Tn_FSB_EN_CNF_SHIFT		(14)
+#define	Tn_INT_ROUTE_CNF_MASK		(0x3e00UL)
+#define	Tn_INT_ROUTE_CNF_SHIFT		(9)
+#define	Tn_32MODE_CNF_MASK		(0x0100UL)
+#define	Tn_VAL_SET_CNF_MASK		(0x0040UL)
+#define	Tn_SIZE_CAP_MASK		(0x0020UL)
+#define	Tn_PER_INT_CAP_MASK		(0x0010UL)
+#define	Tn_TYPE_CNF_MASK		(0x0008UL)
+#define	Tn_INT_ENB_CNF_MASK		(0x0004UL)
+#define	Tn_INT_TYPE_CNF_MASK		(0x0002UL)
+
+/*
+ * Timer FSB Interrupt Route Register
+ */
+
+#define	Tn_FSB_INT_ADDR_MASK		(0xffffffff00000000ULL)
+#define	Tn_FSB_INT_ADDR_SHIFT		(32UL)
+#define	Tn_FSB_INT_VAL_MASK		(0x00000000ffffffffULL)
+
+/*
+ * exported interfaces
+ */
+
+struct hpet_data {
+	unsigned long hd_phys_address;
+	void __iomem *hd_address;
+	unsigned short hd_nirqs;
+	unsigned int hd_state;	/* timer allocated */
+	unsigned int hd_irq[HPET_MAX_TIMERS];
+};
+
+static inline void hpet_reserve_timer(struct hpet_data *hd, int timer)
+{
+	hd->hd_state |= (1 << timer);
+	return;
+}
+
+int hpet_alloc(struct hpet_data *);
+
+#endif /* __KERNEL__ */
+
+struct hpet_info {
+	unsigned long hi_ireqfreq;	/* Hz */
+	unsigned long hi_flags;	/* information */
+	unsigned short hi_hpet;
+	unsigned short hi_timer;
+};
+
+#define HPET_INFO_PERIODIC	0x0010	/* periodic-capable comparator */
+
+#define	HPET_IE_ON	_IO('h', 0x01)	/* interrupt on */
+#define	HPET_IE_OFF	_IO('h', 0x02)	/* interrupt off */
+#define	HPET_INFO	_IOR('h', 0x03, struct hpet_info)
+#define	HPET_EPI	_IO('h', 0x04)	/* enable periodic */
+#define	HPET_DPI	_IO('h', 0x05)	/* disable periodic */
+#define	HPET_IRQFREQ	_IOW('h', 0x6, unsigned long)	/* IRQFREQ usec */
+
+#define MAX_HPET_TBS	8		/* maximum hpet timer blocks */
+
+#endif				/* !__HPET__ */
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
new file mode 100644
index 00000000..fd0dc30c
--- /dev/null
+++ b/include/linux/hrtimer.h
@@ -0,0 +1,453 @@
+/*
+ *  include/linux/hrtimer.h
+ *
+ *  hrtimers - High-resolution kernel timers
+ *
+ *   Copyright(C) 2005, Thomas Gleixner <tglx@linutronix.de>
+ *   Copyright(C) 2005, Red Hat, Inc., Ingo Molnar
+ *
+ *  data type definitions, declarations, prototypes
+ *
+ *  Started by: Thomas Gleixner and Ingo Molnar
+ *
+ *  For licencing details see kernel-base/COPYING
+ */
+#ifndef _LINUX_HRTIMER_H
+#define _LINUX_HRTIMER_H
+
+#include <linux/rbtree.h>
+#include <linux/ktime.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/wait.h>
+#include <linux/percpu.h>
+#include <linux/timer.h>
+#include <linux/timerqueue.h>
+
+struct hrtimer_clock_base;
+struct hrtimer_cpu_base;
+
+/*
+ * Mode arguments of xxx_hrtimer functions:
+ */
+enum hrtimer_mode {
+	HRTIMER_MODE_ABS = 0x0,		/* Time value is absolute */
+	HRTIMER_MODE_REL = 0x1,		/* Time value is relative to now */
+	HRTIMER_MODE_PINNED = 0x02,	/* Timer is bound to CPU */
+	HRTIMER_MODE_ABS_PINNED = 0x02,
+	HRTIMER_MODE_REL_PINNED = 0x03,
+};
+
+/*
+ * Return values for the callback function
+ */
+enum hrtimer_restart {
+	HRTIMER_NORESTART,	/* Timer is not restarted */
+	HRTIMER_RESTART,	/* Timer must be restarted */
+};
+
+/*
+ * Values to track state of the timer
+ *
+ * Possible states:
+ *
+ * 0x00		inactive
+ * 0x01		enqueued into rbtree
+ * 0x02		callback function running
+ * 0x04		timer is migrated to another cpu
+ *
+ * Special cases:
+ * 0x03		callback function running and enqueued
+ *		(was requeued on another CPU)
+ * 0x05		timer was migrated on CPU hotunplug
+ *
+ * The "callback function running and enqueued" status is only possible on
+ * SMP. It happens for example when a posix timer expired and the callback
+ * queued a signal. Between dropping the lock which protects the posix timer
+ * and reacquiring the base lock of the hrtimer, another CPU can deliver the
+ * signal and rearm the timer. We have to preserve the callback running state,
+ * as otherwise the timer could be removed before the softirq code finishes the
+ * the handling of the timer.
+ *
+ * The HRTIMER_STATE_ENQUEUED bit is always or'ed to the current state
+ * to preserve the HRTIMER_STATE_CALLBACK in the above scenario. This
+ * also affects HRTIMER_STATE_MIGRATE where the preservation is not
+ * necessary. HRTIMER_STATE_MIGRATE is cleared after the timer is
+ * enqueued on the new cpu.
+ *
+ * All state transitions are protected by cpu_base->lock.
+ */
+#define HRTIMER_STATE_INACTIVE	0x00
+#define HRTIMER_STATE_ENQUEUED	0x01
+#define HRTIMER_STATE_CALLBACK	0x02
+#define HRTIMER_STATE_MIGRATE	0x04
+
+/**
+ * struct hrtimer - the basic hrtimer structure
+ * @node:	timerqueue node, which also manages node.expires,
+ *		the absolute expiry time in the hrtimers internal
+ *		representation. The time is related to the clock on
+ *		which the timer is based. Is setup by adding
+ *		slack to the _softexpires value. For non range timers
+ *		identical to _softexpires.
+ * @_softexpires: the absolute earliest expiry time of the hrtimer.
+ *		The time which was given as expiry time when the timer
+ *		was armed.
+ * @function:	timer expiry callback function
+ * @base:	pointer to the timer base (per cpu and per clock)
+ * @state:	state information (See bit values above)
+ * @start_site:	timer statistics field to store the site where the timer
+ *		was started
+ * @start_comm: timer statistics field to store the name of the process which
+ *		started the timer
+ * @start_pid: timer statistics field to store the pid of the task which
+ *		started the timer
+ *
+ * The hrtimer structure must be initialized by hrtimer_init()
+ */
+struct hrtimer {
+	struct timerqueue_node		node;
+	ktime_t				_softexpires;
+	enum hrtimer_restart		(*function)(struct hrtimer *);
+	struct hrtimer_clock_base	*base;
+	unsigned long			state;
+#ifdef CONFIG_TIMER_STATS
+	int				start_pid;
+	void				*start_site;
+	char				start_comm[16];
+#endif
+};
+
+/**
+ * struct hrtimer_sleeper - simple sleeper structure
+ * @timer:	embedded timer structure
+ * @task:	task to wake up
+ *
+ * task is set to NULL, when the timer expires.
+ */
+struct hrtimer_sleeper {
+	struct hrtimer timer;
+	struct task_struct *task;
+};
+
+/**
+ * struct hrtimer_clock_base - the timer base for a specific clock
+ * @cpu_base:		per cpu clock base
+ * @index:		clock type index for per_cpu support when moving a
+ *			timer to a base on another cpu.
+ * @clockid:		clock id for per_cpu support
+ * @active:		red black tree root node for the active timers
+ * @resolution:		the resolution of the clock, in nanoseconds
+ * @get_time:		function to retrieve the current time of the clock
+ * @softirq_time:	the time when running the hrtimer queue in the softirq
+ * @offset:		offset of this clock to the monotonic base
+ */
+struct hrtimer_clock_base {
+	struct hrtimer_cpu_base	*cpu_base;
+	int			index;
+	clockid_t		clockid;
+	struct timerqueue_head	active;
+	ktime_t			resolution;
+	ktime_t			(*get_time)(void);
+	ktime_t			softirq_time;
+	ktime_t			offset;
+};
+
+enum  hrtimer_base_type {
+	HRTIMER_BASE_MONOTONIC,
+	HRTIMER_BASE_REALTIME,
+	HRTIMER_BASE_BOOTTIME,
+	HRTIMER_MAX_CLOCK_BASES,
+};
+
+/*
+ * struct hrtimer_cpu_base - the per cpu clock bases
+ * @lock:		lock protecting the base and associated clock bases
+ *			and timers
+ * @active_bases:	Bitfield to mark bases with active timers
+ * @expires_next:	absolute time of the next event which was scheduled
+ *			via clock_set_next_event()
+ * @hres_active:	State of high resolution mode
+ * @hang_detected:	The last hrtimer interrupt detected a hang
+ * @nr_events:		Total number of hrtimer interrupt events
+ * @nr_retries:		Total number of hrtimer interrupt retries
+ * @nr_hangs:		Total number of hrtimer interrupt hangs
+ * @max_hang_time:	Maximum time spent in hrtimer_interrupt
+ * @clock_base:		array of clock bases for this cpu
+ */
+struct hrtimer_cpu_base {
+	raw_spinlock_t			lock;
+	unsigned long			active_bases;
+#ifdef CONFIG_HIGH_RES_TIMERS
+	ktime_t				expires_next;
+	int				hres_active;
+	int				hang_detected;
+	unsigned long			nr_events;
+	unsigned long			nr_retries;
+	unsigned long			nr_hangs;
+	ktime_t				max_hang_time;
+#endif
+	struct hrtimer_clock_base	clock_base[HRTIMER_MAX_CLOCK_BASES];
+};
+
+static inline void hrtimer_set_expires(struct hrtimer *timer, ktime_t time)
+{
+	timer->node.expires = time;
+	timer->_softexpires = time;
+}
+
+static inline void hrtimer_set_expires_range(struct hrtimer *timer, ktime_t time, ktime_t delta)
+{
+	timer->_softexpires = time;
+	timer->node.expires = ktime_add_safe(time, delta);
+}
+
+static inline void hrtimer_set_expires_range_ns(struct hrtimer *timer, ktime_t time, unsigned long delta)
+{
+	timer->_softexpires = time;
+	timer->node.expires = ktime_add_safe(time, ns_to_ktime(delta));
+}
+
+static inline void hrtimer_set_expires_tv64(struct hrtimer *timer, s64 tv64)
+{
+	timer->node.expires.tv64 = tv64;
+	timer->_softexpires.tv64 = tv64;
+}
+
+static inline void hrtimer_add_expires(struct hrtimer *timer, ktime_t time)
+{
+	timer->node.expires = ktime_add_safe(timer->node.expires, time);
+	timer->_softexpires = ktime_add_safe(timer->_softexpires, time);
+}
+
+static inline void hrtimer_add_expires_ns(struct hrtimer *timer, u64 ns)
+{
+	timer->node.expires = ktime_add_ns(timer->node.expires, ns);
+	timer->_softexpires = ktime_add_ns(timer->_softexpires, ns);
+}
+
+static inline ktime_t hrtimer_get_expires(const struct hrtimer *timer)
+{
+	return timer->node.expires;
+}
+
+static inline ktime_t hrtimer_get_softexpires(const struct hrtimer *timer)
+{
+	return timer->_softexpires;
+}
+
+static inline s64 hrtimer_get_expires_tv64(const struct hrtimer *timer)
+{
+	return timer->node.expires.tv64;
+}
+static inline s64 hrtimer_get_softexpires_tv64(const struct hrtimer *timer)
+{
+	return timer->_softexpires.tv64;
+}
+
+static inline s64 hrtimer_get_expires_ns(const struct hrtimer *timer)
+{
+	return ktime_to_ns(timer->node.expires);
+}
+
+static inline ktime_t hrtimer_expires_remaining(const struct hrtimer *timer)
+{
+	return ktime_sub(timer->node.expires, timer->base->get_time());
+}
+
+#ifdef CONFIG_HIGH_RES_TIMERS
+struct clock_event_device;
+
+extern void hrtimer_interrupt(struct clock_event_device *dev);
+
+/*
+ * In high resolution mode the time reference must be read accurate
+ */
+static inline ktime_t hrtimer_cb_get_time(struct hrtimer *timer)
+{
+	return timer->base->get_time();
+}
+
+static inline int hrtimer_is_hres_active(struct hrtimer *timer)
+{
+	return timer->base->cpu_base->hres_active;
+}
+
+extern void hrtimer_peek_ahead_timers(void);
+
+/*
+ * The resolution of the clocks. The resolution value is returned in
+ * the clock_getres() system call to give application programmers an
+ * idea of the (in)accuracy of timers. Timer values are rounded up to
+ * this resolution values.
+ */
+# define HIGH_RES_NSEC		1
+# define KTIME_HIGH_RES		(ktime_t) { .tv64 = HIGH_RES_NSEC }
+# define MONOTONIC_RES_NSEC	HIGH_RES_NSEC
+# define KTIME_MONOTONIC_RES	KTIME_HIGH_RES
+
+#else
+
+# define MONOTONIC_RES_NSEC	LOW_RES_NSEC
+# define KTIME_MONOTONIC_RES	KTIME_LOW_RES
+
+static inline void hrtimer_peek_ahead_timers(void) { }
+
+/*
+ * In non high resolution mode the time reference is taken from
+ * the base softirq time variable.
+ */
+static inline ktime_t hrtimer_cb_get_time(struct hrtimer *timer)
+{
+	return timer->base->softirq_time;
+}
+
+static inline int hrtimer_is_hres_active(struct hrtimer *timer)
+{
+	return 0;
+}
+#endif
+
+extern void clock_was_set(void);
+#ifdef CONFIG_TIMERFD
+extern void timerfd_clock_was_set(void);
+#else
+static inline void timerfd_clock_was_set(void) { }
+#endif
+extern void hrtimers_resume(void);
+
+extern ktime_t ktime_get(void);
+extern ktime_t ktime_get_real(void);
+extern ktime_t ktime_get_boottime(void);
+extern ktime_t ktime_get_monotonic_offset(void);
+
+DECLARE_PER_CPU(struct tick_device, tick_cpu_device);
+
+
+/* Exported timer functions: */
+
+/* Initialize timers: */
+extern void hrtimer_init(struct hrtimer *timer, clockid_t which_clock,
+			 enum hrtimer_mode mode);
+
+#ifdef CONFIG_DEBUG_OBJECTS_TIMERS
+extern void hrtimer_init_on_stack(struct hrtimer *timer, clockid_t which_clock,
+				  enum hrtimer_mode mode);
+
+extern void destroy_hrtimer_on_stack(struct hrtimer *timer);
+#else
+static inline void hrtimer_init_on_stack(struct hrtimer *timer,
+					 clockid_t which_clock,
+					 enum hrtimer_mode mode)
+{
+	hrtimer_init(timer, which_clock, mode);
+}
+static inline void destroy_hrtimer_on_stack(struct hrtimer *timer) { }
+#endif
+
+/* Basic timer operations: */
+extern int hrtimer_start(struct hrtimer *timer, ktime_t tim,
+			 const enum hrtimer_mode mode);
+extern int hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
+			unsigned long range_ns, const enum hrtimer_mode mode);
+extern int
+__hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
+			 unsigned long delta_ns,
+			 const enum hrtimer_mode mode, int wakeup);
+
+extern int hrtimer_cancel(struct hrtimer *timer);
+extern int hrtimer_try_to_cancel(struct hrtimer *timer);
+
+static inline int hrtimer_start_expires(struct hrtimer *timer,
+						enum hrtimer_mode mode)
+{
+	unsigned long delta;
+	ktime_t soft, hard;
+	soft = hrtimer_get_softexpires(timer);
+	hard = hrtimer_get_expires(timer);
+	delta = ktime_to_ns(ktime_sub(hard, soft));
+	return hrtimer_start_range_ns(timer, soft, delta, mode);
+}
+
+static inline int hrtimer_restart(struct hrtimer *timer)
+{
+	return hrtimer_start_expires(timer, HRTIMER_MODE_ABS);
+}
+
+/* Query timers: */
+extern ktime_t hrtimer_get_remaining(const struct hrtimer *timer);
+extern int hrtimer_get_res(const clockid_t which_clock, struct timespec *tp);
+
+extern ktime_t hrtimer_get_next_event(void);
+
+/*
+ * A timer is active, when it is enqueued into the rbtree or the
+ * callback function is running or it's in the state of being migrated
+ * to another cpu.
+ */
+static inline int hrtimer_active(const struct hrtimer *timer)
+{
+	return timer->state != HRTIMER_STATE_INACTIVE;
+}
+
+/*
+ * Helper function to check, whether the timer is on one of the queues
+ */
+static inline int hrtimer_is_queued(struct hrtimer *timer)
+{
+	return timer->state & HRTIMER_STATE_ENQUEUED;
+}
+
+/*
+ * Helper function to check, whether the timer is running the callback
+ * function
+ */
+static inline int hrtimer_callback_running(struct hrtimer *timer)
+{
+	return timer->state & HRTIMER_STATE_CALLBACK;
+}
+
+/* Forward a hrtimer so it expires after now: */
+extern u64
+hrtimer_forward(struct hrtimer *timer, ktime_t now, ktime_t interval);
+
+/* Forward a hrtimer so it expires after the hrtimer's current now */
+static inline u64 hrtimer_forward_now(struct hrtimer *timer,
+				      ktime_t interval)
+{
+	return hrtimer_forward(timer, timer->base->get_time(), interval);
+}
+
+/* Precise sleep: */
+extern long hrtimer_nanosleep(struct timespec *rqtp,
+			      struct timespec __user *rmtp,
+			      const enum hrtimer_mode mode,
+			      const clockid_t clockid);
+extern long hrtimer_nanosleep_restart(struct restart_block *restart_block);
+
+extern void hrtimer_init_sleeper(struct hrtimer_sleeper *sl,
+				 struct task_struct *tsk);
+
+extern int schedule_hrtimeout_range(ktime_t *expires, unsigned long delta,
+						const enum hrtimer_mode mode);
+extern int schedule_hrtimeout_range_clock(ktime_t *expires,
+		unsigned long delta, const enum hrtimer_mode mode, int clock);
+extern int schedule_hrtimeout(ktime_t *expires, const enum hrtimer_mode mode);
+
+/* Soft interrupt function to run the hrtimer queues: */
+extern void hrtimer_run_queues(void);
+extern void hrtimer_run_pending(void);
+
+/* Bootup initialization: */
+extern void __init hrtimers_init(void);
+
+#if BITS_PER_LONG < 64
+extern u64 ktime_divns(const ktime_t kt, s64 div);
+#else /* BITS_PER_LONG < 64 */
+# define ktime_divns(kt, div)		(u64)((kt).tv64 / (div))
+#endif
+
+/* Show pending timers: */
+extern void sysrq_timer_list_show(void);
+
+#endif
diff --git a/include/linux/hsi/Kbuild b/include/linux/hsi/Kbuild
new file mode 100644
index 00000000..271a770b
--- /dev/null
+++ b/include/linux/hsi/Kbuild
@@ -0,0 +1 @@
+header-y += hsi_char.h
diff --git a/include/linux/hsi/hsi.h b/include/linux/hsi/hsi.h
new file mode 100644
index 00000000..56fae865
--- /dev/null
+++ b/include/linux/hsi/hsi.h
@@ -0,0 +1,413 @@
+/*
+ * HSI core header file.
+ *
+ * Copyright (C) 2010 Nokia Corporation. All rights reserved.
+ *
+ * Contact: Carlos Chinea <carlos.chinea@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __LINUX_HSI_H__
+#define __LINUX_HSI_H__
+
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/scatterlist.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+
+/* HSI message ttype */
+#define HSI_MSG_READ	0
+#define HSI_MSG_WRITE	1
+
+/* HSI configuration values */
+enum {
+	HSI_MODE_STREAM	= 1,
+	HSI_MODE_FRAME,
+};
+
+enum {
+	HSI_FLOW_SYNC,	/* Synchronized flow */
+	HSI_FLOW_PIPE,	/* Pipelined flow */
+};
+
+enum {
+	HSI_ARB_RR,	/* Round-robin arbitration */
+	HSI_ARB_PRIO,	/* Channel priority arbitration */
+};
+
+#define HSI_MAX_CHANNELS	16
+
+/* HSI message status codes */
+enum {
+	HSI_STATUS_COMPLETED,	/* Message transfer is completed */
+	HSI_STATUS_PENDING,	/* Message pending to be read/write (POLL) */
+	HSI_STATUS_PROCEEDING,	/* Message transfer is ongoing */
+	HSI_STATUS_QUEUED,	/* Message waiting to be served */
+	HSI_STATUS_ERROR,	/* Error when message transfer was ongoing */
+};
+
+/* HSI port event codes */
+enum {
+	HSI_EVENT_START_RX,
+	HSI_EVENT_STOP_RX,
+};
+
+/**
+ * struct hsi_config - Configuration for RX/TX HSI modules
+ * @mode: Bit transmission mode (STREAM or FRAME)
+ * @channels: Number of channels to use [1..16]
+ * @speed: Max bit transmission speed (Kbit/s)
+ * @flow: RX flow type (SYNCHRONIZED or PIPELINE)
+ * @arb_mode: Arbitration mode for TX frame (Round robin, priority)
+ */
+struct hsi_config {
+	unsigned int	mode;
+	unsigned int	channels;
+	unsigned int	speed;
+	union {
+		unsigned int	flow;		/* RX only */
+		unsigned int	arb_mode;	/* TX only */
+	};
+};
+
+/**
+ * struct hsi_board_info - HSI client board info
+ * @name: Name for the HSI device
+ * @hsi_id: HSI controller id where the client sits
+ * @port: Port number in the controller where the client sits
+ * @tx_cfg: HSI TX configuration
+ * @rx_cfg: HSI RX configuration
+ * @platform_data: Platform related data
+ * @archdata: Architecture-dependent device data
+ */
+struct hsi_board_info {
+	const char		*name;
+	unsigned int		hsi_id;
+	unsigned int		port;
+	struct hsi_config	tx_cfg;
+	struct hsi_config	rx_cfg;
+	void			*platform_data;
+	struct dev_archdata	*archdata;
+};
+
+#ifdef CONFIG_HSI_BOARDINFO
+extern int hsi_register_board_info(struct hsi_board_info const *info,
+							unsigned int len);
+#else
+static inline int hsi_register_board_info(struct hsi_board_info const *info,
+							unsigned int len)
+{
+	return 0;
+}
+#endif /* CONFIG_HSI_BOARDINFO */
+
+/**
+ * struct hsi_client - HSI client attached to an HSI port
+ * @device: Driver model representation of the device
+ * @tx_cfg: HSI TX configuration
+ * @rx_cfg: HSI RX configuration
+ * @e_handler: Callback for handling port events (RX Wake High/Low)
+ * @pclaimed: Keeps tracks if the clients claimed its associated HSI port
+ * @nb: Notifier block for port events
+ */
+struct hsi_client {
+	struct device		device;
+	struct hsi_config	tx_cfg;
+	struct hsi_config	rx_cfg;
+	/* private: */
+	void			(*ehandler)(struct hsi_client *, unsigned long);
+	unsigned int		pclaimed:1;
+	struct notifier_block	nb;
+};
+
+#define to_hsi_client(dev) container_of(dev, struct hsi_client, device)
+
+static inline void hsi_client_set_drvdata(struct hsi_client *cl, void *data)
+{
+	dev_set_drvdata(&cl->device, data);
+}
+
+static inline void *hsi_client_drvdata(struct hsi_client *cl)
+{
+	return dev_get_drvdata(&cl->device);
+}
+
+int hsi_register_port_event(struct hsi_client *cl,
+			void (*handler)(struct hsi_client *, unsigned long));
+int hsi_unregister_port_event(struct hsi_client *cl);
+
+/**
+ * struct hsi_client_driver - Driver associated to an HSI client
+ * @driver: Driver model representation of the driver
+ */
+struct hsi_client_driver {
+	struct device_driver	driver;
+};
+
+#define to_hsi_client_driver(drv) container_of(drv, struct hsi_client_driver,\
+									driver)
+
+int hsi_register_client_driver(struct hsi_client_driver *drv);
+
+static inline void hsi_unregister_client_driver(struct hsi_client_driver *drv)
+{
+	driver_unregister(&drv->driver);
+}
+
+/**
+ * struct hsi_msg - HSI message descriptor
+ * @link: Free to use by the current descriptor owner
+ * @cl: HSI device client that issues the transfer
+ * @sgt: Head of the scatterlist array
+ * @context: Client context data associated to the transfer
+ * @complete: Transfer completion callback
+ * @destructor: Destructor to free resources when flushing
+ * @status: Status of the transfer when completed
+ * @actual_len: Actual length of data transfered on completion
+ * @channel: Channel were to TX/RX the message
+ * @ttype: Transfer type (TX if set, RX otherwise)
+ * @break_frame: if true HSI will send/receive a break frame. Data buffers are
+ *		ignored in the request.
+ */
+struct hsi_msg {
+	struct list_head	link;
+	struct hsi_client	*cl;
+	struct sg_table		sgt;
+	void			*context;
+
+	void			(*complete)(struct hsi_msg *msg);
+	void			(*destructor)(struct hsi_msg *msg);
+
+	int			status;
+	unsigned int		actual_len;
+	unsigned int		channel;
+	unsigned int		ttype:1;
+	unsigned int		break_frame:1;
+};
+
+struct hsi_msg *hsi_alloc_msg(unsigned int n_frag, gfp_t flags);
+void hsi_free_msg(struct hsi_msg *msg);
+
+/**
+ * struct hsi_port - HSI port device
+ * @device: Driver model representation of the device
+ * @tx_cfg: Current TX path configuration
+ * @rx_cfg: Current RX path configuration
+ * @num: Port number
+ * @shared: Set when port can be shared by different clients
+ * @claimed: Reference count of clients which claimed the port
+ * @lock: Serialize port claim
+ * @async: Asynchronous transfer callback
+ * @setup: Callback to set the HSI client configuration
+ * @flush: Callback to clean the HW state and destroy all pending transfers
+ * @start_tx: Callback to inform that a client wants to TX data
+ * @stop_tx: Callback to inform that a client no longer wishes to TX data
+ * @release: Callback to inform that a client no longer uses the port
+ * @n_head: Notifier chain for signaling port events to the clients.
+ */
+struct hsi_port {
+	struct device			device;
+	struct hsi_config		tx_cfg;
+	struct hsi_config		rx_cfg;
+	unsigned int			num;
+	unsigned int			shared:1;
+	int				claimed;
+	struct mutex			lock;
+	int				(*async)(struct hsi_msg *msg);
+	int				(*setup)(struct hsi_client *cl);
+	int				(*flush)(struct hsi_client *cl);
+	int				(*start_tx)(struct hsi_client *cl);
+	int				(*stop_tx)(struct hsi_client *cl);
+	int				(*release)(struct hsi_client *cl);
+	/* private */
+	struct atomic_notifier_head	n_head;
+};
+
+#define to_hsi_port(dev) container_of(dev, struct hsi_port, device)
+#define hsi_get_port(cl) to_hsi_port((cl)->device.parent)
+
+int hsi_event(struct hsi_port *port, unsigned long event);
+int hsi_claim_port(struct hsi_client *cl, unsigned int share);
+void hsi_release_port(struct hsi_client *cl);
+
+static inline int hsi_port_claimed(struct hsi_client *cl)
+{
+	return cl->pclaimed;
+}
+
+static inline void hsi_port_set_drvdata(struct hsi_port *port, void *data)
+{
+	dev_set_drvdata(&port->device, data);
+}
+
+static inline void *hsi_port_drvdata(struct hsi_port *port)
+{
+	return dev_get_drvdata(&port->device);
+}
+
+/**
+ * struct hsi_controller - HSI controller device
+ * @device: Driver model representation of the device
+ * @owner: Pointer to the module owning the controller
+ * @id: HSI controller ID
+ * @num_ports: Number of ports in the HSI controller
+ * @port: Array of HSI ports
+ */
+struct hsi_controller {
+	struct device		device;
+	struct module		*owner;
+	unsigned int		id;
+	unsigned int		num_ports;
+	struct hsi_port		**port;
+};
+
+#define to_hsi_controller(dev) container_of(dev, struct hsi_controller, device)
+
+struct hsi_controller *hsi_alloc_controller(unsigned int n_ports, gfp_t flags);
+void hsi_put_controller(struct hsi_controller *hsi);
+int hsi_register_controller(struct hsi_controller *hsi);
+void hsi_unregister_controller(struct hsi_controller *hsi);
+
+static inline void hsi_controller_set_drvdata(struct hsi_controller *hsi,
+								void *data)
+{
+	dev_set_drvdata(&hsi->device, data);
+}
+
+static inline void *hsi_controller_drvdata(struct hsi_controller *hsi)
+{
+	return dev_get_drvdata(&hsi->device);
+}
+
+static inline struct hsi_port *hsi_find_port_num(struct hsi_controller *hsi,
+							unsigned int num)
+{
+	return (num < hsi->num_ports) ? hsi->port[num] : NULL;
+}
+
+/*
+ * API for HSI clients
+ */
+int hsi_async(struct hsi_client *cl, struct hsi_msg *msg);
+
+/**
+ * hsi_id - Get HSI controller ID associated to a client
+ * @cl: Pointer to a HSI client
+ *
+ * Return the controller id where the client is attached to
+ */
+static inline unsigned int hsi_id(struct hsi_client *cl)
+{
+	return	to_hsi_controller(cl->device.parent->parent)->id;
+}
+
+/**
+ * hsi_port_id - Gets the port number a client is attached to
+ * @cl: Pointer to HSI client
+ *
+ * Return the port number associated to the client
+ */
+static inline unsigned int hsi_port_id(struct hsi_client *cl)
+{
+	return	to_hsi_port(cl->device.parent)->num;
+}
+
+/**
+ * hsi_setup - Configure the client's port
+ * @cl: Pointer to the HSI client
+ *
+ * When sharing ports, clients should either relay on a single
+ * client setup or have the same setup for all of them.
+ *
+ * Return -errno on failure, 0 on success
+ */
+static inline int hsi_setup(struct hsi_client *cl)
+{
+	if (!hsi_port_claimed(cl))
+		return -EACCES;
+	return	hsi_get_port(cl)->setup(cl);
+}
+
+/**
+ * hsi_flush - Flush all pending transactions on the client's port
+ * @cl: Pointer to the HSI client
+ *
+ * This function will destroy all pending hsi_msg in the port and reset
+ * the HW port so it is ready to receive and transmit from a clean state.
+ *
+ * Return -errno on failure, 0 on success
+ */
+static inline int hsi_flush(struct hsi_client *cl)
+{
+	if (!hsi_port_claimed(cl))
+		return -EACCES;
+	return hsi_get_port(cl)->flush(cl);
+}
+
+/**
+ * hsi_async_read - Submit a read transfer
+ * @cl: Pointer to the HSI client
+ * @msg: HSI message descriptor of the transfer
+ *
+ * Return -errno on failure, 0 on success
+ */
+static inline int hsi_async_read(struct hsi_client *cl, struct hsi_msg *msg)
+{
+	msg->ttype = HSI_MSG_READ;
+	return hsi_async(cl, msg);
+}
+
+/**
+ * hsi_async_write - Submit a write transfer
+ * @cl: Pointer to the HSI client
+ * @msg: HSI message descriptor of the transfer
+ *
+ * Return -errno on failure, 0 on success
+ */
+static inline int hsi_async_write(struct hsi_client *cl, struct hsi_msg *msg)
+{
+	msg->ttype = HSI_MSG_WRITE;
+	return hsi_async(cl, msg);
+}
+
+/**
+ * hsi_start_tx - Signal the port that the client wants to start a TX
+ * @cl: Pointer to the HSI client
+ *
+ * Return -errno on failure, 0 on success
+ */
+static inline int hsi_start_tx(struct hsi_client *cl)
+{
+	if (!hsi_port_claimed(cl))
+		return -EACCES;
+	return hsi_get_port(cl)->start_tx(cl);
+}
+
+/**
+ * hsi_stop_tx - Signal the port that the client no longer wants to transmit
+ * @cl: Pointer to the HSI client
+ *
+ * Return -errno on failure, 0 on success
+ */
+static inline int hsi_stop_tx(struct hsi_client *cl)
+{
+	if (!hsi_port_claimed(cl))
+		return -EACCES;
+	return hsi_get_port(cl)->stop_tx(cl);
+}
+#endif /* __LINUX_HSI_H__ */
diff --git a/include/linux/hsi/hsi_char.h b/include/linux/hsi/hsi_char.h
new file mode 100644
index 00000000..76160b4f
--- /dev/null
+++ b/include/linux/hsi/hsi_char.h
@@ -0,0 +1,63 @@
+/*
+ * Part of the HSI character device driver.
+ *
+ * Copyright (C) 2010 Nokia Corporation. All rights reserved.
+ *
+ * Contact: Andras Domokos <andras.domokos at nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+
+#ifndef __HSI_CHAR_H
+#define __HSI_CHAR_H
+
+#define HSI_CHAR_MAGIC		'k'
+#define HSC_IOW(num, dtype)	_IOW(HSI_CHAR_MAGIC, num, dtype)
+#define HSC_IOR(num, dtype)	_IOR(HSI_CHAR_MAGIC, num, dtype)
+#define HSC_IOWR(num, dtype)	_IOWR(HSI_CHAR_MAGIC, num, dtype)
+#define HSC_IO(num)		_IO(HSI_CHAR_MAGIC, num)
+
+#define HSC_RESET		HSC_IO(16)
+#define HSC_SET_PM		HSC_IO(17)
+#define HSC_SEND_BREAK		HSC_IO(18)
+#define HSC_SET_RX		HSC_IOW(19, struct hsc_rx_config)
+#define HSC_GET_RX		HSC_IOW(20, struct hsc_rx_config)
+#define HSC_SET_TX		HSC_IOW(21, struct hsc_tx_config)
+#define HSC_GET_TX		HSC_IOW(22, struct hsc_tx_config)
+
+#define HSC_PM_DISABLE		0
+#define HSC_PM_ENABLE		1
+
+#define HSC_MODE_STREAM		1
+#define HSC_MODE_FRAME		2
+#define HSC_FLOW_SYNC		0
+#define HSC_ARB_RR		0
+#define HSC_ARB_PRIO		1
+
+struct hsc_rx_config {
+	uint32_t mode;
+	uint32_t flow;
+	uint32_t channels;
+};
+
+struct hsc_tx_config {
+	uint32_t mode;
+	uint32_t channels;
+	uint32_t speed;
+	uint32_t arb_mode;
+};
+
+#endif /* __HSI_CHAR_H */
diff --git a/include/linux/htcpld.h b/include/linux/htcpld.h
new file mode 100644
index 00000000..ab3f6cb4
--- /dev/null
+++ b/include/linux/htcpld.h
@@ -0,0 +1,24 @@
+#ifndef __LINUX_HTCPLD_H
+#define __LINUX_HTCPLD_H
+
+struct htcpld_chip_platform_data {
+	unsigned int addr;
+	unsigned int reset;
+	unsigned int num_gpios;
+	unsigned int gpio_out_base;
+	unsigned int gpio_in_base;
+	unsigned int irq_base;
+	unsigned int num_irqs;
+};
+
+struct htcpld_core_platform_data {
+	unsigned int                      int_reset_gpio_hi;
+	unsigned int                      int_reset_gpio_lo;
+	unsigned int                      i2c_adapter_id;
+
+	struct htcpld_chip_platform_data  *chip;
+	unsigned int                      num_chip;
+};
+
+#endif /* __LINUX_HTCPLD_H */
+
diff --git a/include/linux/htirq.h b/include/linux/htirq.h
new file mode 100644
index 00000000..70a1dbbf
--- /dev/null
+++ b/include/linux/htirq.h
@@ -0,0 +1,24 @@
+#ifndef LINUX_HTIRQ_H
+#define LINUX_HTIRQ_H
+
+struct ht_irq_msg {
+	u32	address_lo;	/* low 32 bits of the ht irq message */
+	u32	address_hi;	/* high 32 bits of the it irq message */
+};
+
+/* Helper functions.. */
+void fetch_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg);
+void write_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg);
+struct irq_data;
+void mask_ht_irq(struct irq_data *data);
+void unmask_ht_irq(struct irq_data *data);
+
+/* The arch hook for getting things started */
+int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev);
+
+/* For drivers of buggy hardware */
+typedef void (ht_irq_update_t)(struct pci_dev *dev, int irq,
+			       struct ht_irq_msg *msg);
+int __ht_create_irq(struct pci_dev *dev, int idx, ht_irq_update_t *update);
+
+#endif /* LINUX_HTIRQ_H */
diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h
new file mode 100644
index 00000000..c8af7a2e
--- /dev/null
+++ b/include/linux/huge_mm.h
@@ -0,0 +1,199 @@
+#ifndef _LINUX_HUGE_MM_H
+#define _LINUX_HUGE_MM_H
+
+extern int do_huge_pmd_anonymous_page(struct mm_struct *mm,
+				      struct vm_area_struct *vma,
+				      unsigned long address, pmd_t *pmd,
+				      unsigned int flags);
+extern int copy_huge_pmd(struct mm_struct *dst_mm, struct mm_struct *src_mm,
+			 pmd_t *dst_pmd, pmd_t *src_pmd, unsigned long addr,
+			 struct vm_area_struct *vma);
+extern int do_huge_pmd_wp_page(struct mm_struct *mm, struct vm_area_struct *vma,
+			       unsigned long address, pmd_t *pmd,
+			       pmd_t orig_pmd);
+extern pgtable_t get_pmd_huge_pte(struct mm_struct *mm);
+extern struct page *follow_trans_huge_pmd(struct mm_struct *mm,
+					  unsigned long addr,
+					  pmd_t *pmd,
+					  unsigned int flags);
+extern int zap_huge_pmd(struct mmu_gather *tlb,
+			struct vm_area_struct *vma,
+			pmd_t *pmd, unsigned long addr);
+extern int mincore_huge_pmd(struct vm_area_struct *vma, pmd_t *pmd,
+			unsigned long addr, unsigned long end,
+			unsigned char *vec);
+extern int move_huge_pmd(struct vm_area_struct *vma,
+			 struct vm_area_struct *new_vma,
+			 unsigned long old_addr,
+			 unsigned long new_addr, unsigned long old_end,
+			 pmd_t *old_pmd, pmd_t *new_pmd);
+extern int change_huge_pmd(struct vm_area_struct *vma, pmd_t *pmd,
+			unsigned long addr, pgprot_t newprot);
+
+enum transparent_hugepage_flag {
+	TRANSPARENT_HUGEPAGE_FLAG,
+	TRANSPARENT_HUGEPAGE_REQ_MADV_FLAG,
+	TRANSPARENT_HUGEPAGE_DEFRAG_FLAG,
+	TRANSPARENT_HUGEPAGE_DEFRAG_REQ_MADV_FLAG,
+	TRANSPARENT_HUGEPAGE_DEFRAG_KHUGEPAGED_FLAG,
+#ifdef CONFIG_DEBUG_VM
+	TRANSPARENT_HUGEPAGE_DEBUG_COW_FLAG,
+#endif
+};
+
+enum page_check_address_pmd_flag {
+	PAGE_CHECK_ADDRESS_PMD_FLAG,
+	PAGE_CHECK_ADDRESS_PMD_NOTSPLITTING_FLAG,
+	PAGE_CHECK_ADDRESS_PMD_SPLITTING_FLAG,
+};
+extern pmd_t *page_check_address_pmd(struct page *page,
+				     struct mm_struct *mm,
+				     unsigned long address,
+				     enum page_check_address_pmd_flag flag);
+
+#define HPAGE_PMD_ORDER (HPAGE_PMD_SHIFT-PAGE_SHIFT)
+#define HPAGE_PMD_NR (1<<HPAGE_PMD_ORDER)
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#define HPAGE_PMD_SHIFT HPAGE_SHIFT
+#define HPAGE_PMD_MASK HPAGE_MASK
+#define HPAGE_PMD_SIZE HPAGE_SIZE
+
+#define transparent_hugepage_enabled(__vma)				\
+	((transparent_hugepage_flags &					\
+	  (1<<TRANSPARENT_HUGEPAGE_FLAG) ||				\
+	  (transparent_hugepage_flags &					\
+	   (1<<TRANSPARENT_HUGEPAGE_REQ_MADV_FLAG) &&			\
+	   ((__vma)->vm_flags & VM_HUGEPAGE))) &&			\
+	 !((__vma)->vm_flags & VM_NOHUGEPAGE) &&			\
+	 !is_vma_temporary_stack(__vma))
+#define transparent_hugepage_defrag(__vma)				\
+	((transparent_hugepage_flags &					\
+	  (1<<TRANSPARENT_HUGEPAGE_DEFRAG_FLAG)) ||			\
+	 (transparent_hugepage_flags &					\
+	  (1<<TRANSPARENT_HUGEPAGE_DEFRAG_REQ_MADV_FLAG) &&		\
+	  (__vma)->vm_flags & VM_HUGEPAGE))
+#ifdef CONFIG_DEBUG_VM
+#define transparent_hugepage_debug_cow()				\
+	(transparent_hugepage_flags &					\
+	 (1<<TRANSPARENT_HUGEPAGE_DEBUG_COW_FLAG))
+#else /* CONFIG_DEBUG_VM */
+#define transparent_hugepage_debug_cow() 0
+#endif /* CONFIG_DEBUG_VM */
+
+extern unsigned long transparent_hugepage_flags;
+extern int copy_pte_range(struct mm_struct *dst_mm, struct mm_struct *src_mm,
+			  pmd_t *dst_pmd, pmd_t *src_pmd,
+			  struct vm_area_struct *vma,
+			  unsigned long addr, unsigned long end);
+extern int handle_pte_fault(struct mm_struct *mm,
+			    struct vm_area_struct *vma, unsigned long address,
+			    pte_t *pte, pmd_t *pmd, unsigned int flags);
+extern int split_huge_page(struct page *page);
+extern void __split_huge_page_pmd(struct mm_struct *mm, pmd_t *pmd);
+#define split_huge_page_pmd(__mm, __pmd)				\
+	do {								\
+		pmd_t *____pmd = (__pmd);				\
+		if (unlikely(pmd_trans_huge(*____pmd)))			\
+			__split_huge_page_pmd(__mm, ____pmd);		\
+	}  while (0)
+#define wait_split_huge_page(__anon_vma, __pmd)				\
+	do {								\
+		pmd_t *____pmd = (__pmd);				\
+		anon_vma_lock(__anon_vma);				\
+		anon_vma_unlock(__anon_vma);				\
+		BUG_ON(pmd_trans_splitting(*____pmd) ||			\
+		       pmd_trans_huge(*____pmd));			\
+	} while (0)
+#if HPAGE_PMD_ORDER > MAX_ORDER
+#error "hugepages can't be allocated by the buddy allocator"
+#endif
+extern int hugepage_madvise(struct vm_area_struct *vma,
+			    unsigned long *vm_flags, int advice);
+extern void __vma_adjust_trans_huge(struct vm_area_struct *vma,
+				    unsigned long start,
+				    unsigned long end,
+				    long adjust_next);
+extern int __pmd_trans_huge_lock(pmd_t *pmd,
+				 struct vm_area_struct *vma);
+/* mmap_sem must be held on entry */
+static inline int pmd_trans_huge_lock(pmd_t *pmd,
+				      struct vm_area_struct *vma)
+{
+	VM_BUG_ON(!rwsem_is_locked(&vma->vm_mm->mmap_sem));
+	if (pmd_trans_huge(*pmd))
+		return __pmd_trans_huge_lock(pmd, vma);
+	else
+		return 0;
+}
+static inline void vma_adjust_trans_huge(struct vm_area_struct *vma,
+					 unsigned long start,
+					 unsigned long end,
+					 long adjust_next)
+{
+	if (!vma->anon_vma || vma->vm_ops)
+		return;
+	__vma_adjust_trans_huge(vma, start, end, adjust_next);
+}
+static inline int hpage_nr_pages(struct page *page)
+{
+	if (unlikely(PageTransHuge(page)))
+		return HPAGE_PMD_NR;
+	return 1;
+}
+static inline struct page *compound_trans_head(struct page *page)
+{
+	if (PageTail(page)) {
+		struct page *head;
+		head = page->first_page;
+		smp_rmb();
+		/*
+		 * head may be a dangling pointer.
+		 * __split_huge_page_refcount clears PageTail before
+		 * overwriting first_page, so if PageTail is still
+		 * there it means the head pointer isn't dangling.
+		 */
+		if (PageTail(page))
+			return head;
+	}
+	return page;
+}
+#else /* CONFIG_TRANSPARENT_HUGEPAGE */
+#define HPAGE_PMD_SHIFT ({ BUILD_BUG(); 0; })
+#define HPAGE_PMD_MASK ({ BUILD_BUG(); 0; })
+#define HPAGE_PMD_SIZE ({ BUILD_BUG(); 0; })
+
+#define hpage_nr_pages(x) 1
+
+#define transparent_hugepage_enabled(__vma) 0
+
+#define transparent_hugepage_flags 0UL
+static inline int split_huge_page(struct page *page)
+{
+	return 0;
+}
+#define split_huge_page_pmd(__mm, __pmd)	\
+	do { } while (0)
+#define wait_split_huge_page(__anon_vma, __pmd)	\
+	do { } while (0)
+#define compound_trans_head(page) compound_head(page)
+static inline int hugepage_madvise(struct vm_area_struct *vma,
+				   unsigned long *vm_flags, int advice)
+{
+	BUG();
+	return 0;
+}
+static inline void vma_adjust_trans_huge(struct vm_area_struct *vma,
+					 unsigned long start,
+					 unsigned long end,
+					 long adjust_next)
+{
+}
+static inline int pmd_trans_huge_lock(pmd_t *pmd,
+				      struct vm_area_struct *vma)
+{
+	return 0;
+}
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+
+#endif /* _LINUX_HUGE_MM_H */
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
new file mode 100644
index 00000000..000837e1
--- /dev/null
+++ b/include/linux/hugetlb.h
@@ -0,0 +1,317 @@
+#ifndef _LINUX_HUGETLB_H
+#define _LINUX_HUGETLB_H
+
+#include <linux/mm_types.h>
+#include <linux/fs.h>
+#include <linux/hugetlb_inline.h>
+
+struct ctl_table;
+struct user_struct;
+
+#ifdef CONFIG_HUGETLB_PAGE
+
+#include <linux/mempolicy.h>
+#include <linux/shm.h>
+#include <asm/tlbflush.h>
+
+struct hugepage_subpool {
+	spinlock_t lock;
+	long count;
+	long max_hpages, used_hpages;
+};
+
+struct hugepage_subpool *hugepage_new_subpool(long nr_blocks);
+void hugepage_put_subpool(struct hugepage_subpool *spool);
+
+int PageHuge(struct page *page);
+
+void reset_vma_resv_huge_pages(struct vm_area_struct *vma);
+int hugetlb_sysctl_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *);
+int hugetlb_overcommit_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *);
+int hugetlb_treat_movable_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *);
+
+#ifdef CONFIG_NUMA
+int hugetlb_mempolicy_sysctl_handler(struct ctl_table *, int,
+					void __user *, size_t *, loff_t *);
+#endif
+
+int copy_hugetlb_page_range(struct mm_struct *, struct mm_struct *, struct vm_area_struct *);
+int follow_hugetlb_page(struct mm_struct *, struct vm_area_struct *,
+			struct page **, struct vm_area_struct **,
+			unsigned long *, int *, int, unsigned int flags);
+void unmap_hugepage_range(struct vm_area_struct *,
+			unsigned long, unsigned long, struct page *);
+void __unmap_hugepage_range(struct vm_area_struct *,
+			unsigned long, unsigned long, struct page *);
+int hugetlb_prefault(struct address_space *, struct vm_area_struct *);
+void hugetlb_report_meminfo(struct seq_file *);
+int hugetlb_report_node_meminfo(int, char *);
+unsigned long hugetlb_total_pages(void);
+int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
+			unsigned long address, unsigned int flags);
+int hugetlb_reserve_pages(struct inode *inode, long from, long to,
+						struct vm_area_struct *vma,
+						vm_flags_t vm_flags);
+void hugetlb_unreserve_pages(struct inode *inode, long offset, long freed);
+int dequeue_hwpoisoned_huge_page(struct page *page);
+void copy_huge_page(struct page *dst, struct page *src);
+
+extern unsigned long hugepages_treat_as_movable;
+extern const unsigned long hugetlb_zero, hugetlb_infinity;
+extern int sysctl_hugetlb_shm_group;
+extern struct list_head huge_boot_pages;
+
+/* arch callbacks */
+
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+			unsigned long addr, unsigned long sz);
+pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr);
+int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep);
+struct page *follow_huge_addr(struct mm_struct *mm, unsigned long address,
+			      int write);
+struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
+				pmd_t *pmd, int write);
+struct page *follow_huge_pud(struct mm_struct *mm, unsigned long address,
+				pud_t *pud, int write);
+int pmd_huge(pmd_t pmd);
+int pud_huge(pud_t pmd);
+void hugetlb_change_protection(struct vm_area_struct *vma,
+		unsigned long address, unsigned long end, pgprot_t newprot);
+
+#else /* !CONFIG_HUGETLB_PAGE */
+
+static inline int PageHuge(struct page *page)
+{
+	return 0;
+}
+
+static inline void reset_vma_resv_huge_pages(struct vm_area_struct *vma)
+{
+}
+
+static inline unsigned long hugetlb_total_pages(void)
+{
+	return 0;
+}
+
+#define follow_hugetlb_page(m,v,p,vs,a,b,i,w)	({ BUG(); 0; })
+#define follow_huge_addr(mm, addr, write)	ERR_PTR(-EINVAL)
+#define copy_hugetlb_page_range(src, dst, vma)	({ BUG(); 0; })
+#define hugetlb_prefault(mapping, vma)		({ BUG(); 0; })
+#define unmap_hugepage_range(vma, start, end, page)	BUG()
+static inline void hugetlb_report_meminfo(struct seq_file *m)
+{
+}
+#define hugetlb_report_node_meminfo(n, buf)	0
+#define follow_huge_pmd(mm, addr, pmd, write)	NULL
+#define follow_huge_pud(mm, addr, pud, write)	NULL
+#define prepare_hugepage_range(file, addr, len)	(-EINVAL)
+#define pmd_huge(x)	0
+#define pud_huge(x)	0
+#define is_hugepage_only_range(mm, addr, len)	0
+#define hugetlb_free_pgd_range(tlb, addr, end, floor, ceiling) ({BUG(); 0; })
+#define hugetlb_fault(mm, vma, addr, flags)	({ BUG(); 0; })
+#define huge_pte_offset(mm, address)	0
+#define dequeue_hwpoisoned_huge_page(page)	0
+static inline void copy_huge_page(struct page *dst, struct page *src)
+{
+}
+
+#define hugetlb_change_protection(vma, address, end, newprot)
+
+#endif /* !CONFIG_HUGETLB_PAGE */
+
+#define HUGETLB_ANON_FILE "anon_hugepage"
+
+enum {
+	/*
+	 * The file will be used as an shm file so shmfs accounting rules
+	 * apply
+	 */
+	HUGETLB_SHMFS_INODE     = 1,
+	/*
+	 * The file is being created on the internal vfs mount and shmfs
+	 * accounting rules do not apply
+	 */
+	HUGETLB_ANONHUGE_INODE  = 2,
+};
+
+#ifdef CONFIG_HUGETLBFS
+struct hugetlbfs_sb_info {
+	long	max_inodes;   /* inodes allowed */
+	long	free_inodes;  /* inodes free */
+	spinlock_t	stat_lock;
+	struct hstate *hstate;
+	struct hugepage_subpool *spool;
+};
+
+static inline struct hugetlbfs_sb_info *HUGETLBFS_SB(struct super_block *sb)
+{
+	return sb->s_fs_info;
+}
+
+extern const struct file_operations hugetlbfs_file_operations;
+extern const struct vm_operations_struct hugetlb_vm_ops;
+struct file *hugetlb_file_setup(const char *name, unsigned long addr,
+				size_t size, vm_flags_t acct,
+				struct user_struct **user, int creat_flags);
+
+static inline int is_file_hugepages(struct file *file)
+{
+	if (file->f_op == &hugetlbfs_file_operations)
+		return 1;
+	if (is_file_shm_hugepages(file))
+		return 1;
+
+	return 0;
+}
+
+#else /* !CONFIG_HUGETLBFS */
+
+#define is_file_hugepages(file)			0
+static inline struct file *
+hugetlb_file_setup(const char *name, unsigned long addr, size_t size,
+		vm_flags_t acctflag, struct user_struct **user, int creat_flags)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+#endif /* !CONFIG_HUGETLBFS */
+
+#ifdef HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
+					unsigned long len, unsigned long pgoff,
+					unsigned long flags);
+#endif /* HAVE_ARCH_HUGETLB_UNMAPPED_AREA */
+
+#ifdef CONFIG_HUGETLB_PAGE
+
+#define HSTATE_NAME_LEN 32
+/* Defines one hugetlb page size */
+struct hstate {
+	int next_nid_to_alloc;
+	int next_nid_to_free;
+	unsigned int order;
+	unsigned long mask;
+	unsigned long max_huge_pages;
+	unsigned long nr_huge_pages;
+	unsigned long free_huge_pages;
+	unsigned long resv_huge_pages;
+	unsigned long surplus_huge_pages;
+	unsigned long nr_overcommit_huge_pages;
+	struct list_head hugepage_freelists[MAX_NUMNODES];
+	unsigned int nr_huge_pages_node[MAX_NUMNODES];
+	unsigned int free_huge_pages_node[MAX_NUMNODES];
+	unsigned int surplus_huge_pages_node[MAX_NUMNODES];
+	char name[HSTATE_NAME_LEN];
+};
+
+struct huge_bootmem_page {
+	struct list_head list;
+	struct hstate *hstate;
+#ifdef CONFIG_HIGHMEM
+	phys_addr_t phys;
+#endif
+};
+
+struct page *alloc_huge_page_node(struct hstate *h, int nid);
+
+/* arch callback */
+int __init alloc_bootmem_huge_page(struct hstate *h);
+
+void __init hugetlb_add_hstate(unsigned order);
+struct hstate *size_to_hstate(unsigned long size);
+
+#ifndef HUGE_MAX_HSTATE
+#define HUGE_MAX_HSTATE 1
+#endif
+
+extern struct hstate hstates[HUGE_MAX_HSTATE];
+extern unsigned int default_hstate_idx;
+
+#define default_hstate (hstates[default_hstate_idx])
+
+static inline struct hstate *hstate_inode(struct inode *i)
+{
+	struct hugetlbfs_sb_info *hsb;
+	hsb = HUGETLBFS_SB(i->i_sb);
+	return hsb->hstate;
+}
+
+static inline struct hstate *hstate_file(struct file *f)
+{
+	return hstate_inode(f->f_dentry->d_inode);
+}
+
+static inline struct hstate *hstate_vma(struct vm_area_struct *vma)
+{
+	return hstate_file(vma->vm_file);
+}
+
+static inline unsigned long huge_page_size(struct hstate *h)
+{
+	return (unsigned long)PAGE_SIZE << h->order;
+}
+
+extern unsigned long vma_kernel_pagesize(struct vm_area_struct *vma);
+
+extern unsigned long vma_mmu_pagesize(struct vm_area_struct *vma);
+
+static inline unsigned long huge_page_mask(struct hstate *h)
+{
+	return h->mask;
+}
+
+static inline unsigned int huge_page_order(struct hstate *h)
+{
+	return h->order;
+}
+
+static inline unsigned huge_page_shift(struct hstate *h)
+{
+	return h->order + PAGE_SHIFT;
+}
+
+static inline unsigned int pages_per_huge_page(struct hstate *h)
+{
+	return 1 << h->order;
+}
+
+static inline unsigned int blocks_per_huge_page(struct hstate *h)
+{
+	return huge_page_size(h) / 512;
+}
+
+#include <asm/hugetlb.h>
+
+static inline struct hstate *page_hstate(struct page *page)
+{
+	return size_to_hstate(PAGE_SIZE << compound_order(page));
+}
+
+static inline unsigned hstate_index_to_shift(unsigned index)
+{
+	return hstates[index].order + PAGE_SHIFT;
+}
+
+#else
+struct hstate {};
+#define alloc_huge_page_node(h, nid) NULL
+#define alloc_bootmem_huge_page(h) NULL
+#define hstate_file(f) NULL
+#define hstate_vma(v) NULL
+#define hstate_inode(i) NULL
+#define huge_page_size(h) PAGE_SIZE
+#define huge_page_mask(h) PAGE_MASK
+#define vma_kernel_pagesize(v) PAGE_SIZE
+#define vma_mmu_pagesize(v) PAGE_SIZE
+#define huge_page_order(h) 0
+#define huge_page_shift(h) PAGE_SHIFT
+static inline unsigned int pages_per_huge_page(struct hstate *h)
+{
+	return 1;
+}
+#define hstate_index_to_shift(index) 0
+#endif
+
+#endif /* _LINUX_HUGETLB_H */
diff --git a/include/linux/hugetlb_inline.h b/include/linux/hugetlb_inline.h
new file mode 100644
index 00000000..2bb681fb
--- /dev/null
+++ b/include/linux/hugetlb_inline.h
@@ -0,0 +1,22 @@
+#ifndef _LINUX_HUGETLB_INLINE_H
+#define _LINUX_HUGETLB_INLINE_H
+
+#ifdef CONFIG_HUGETLB_PAGE
+
+#include <linux/mm.h>
+
+static inline int is_vm_hugetlb_page(struct vm_area_struct *vma)
+{
+	return !!(vma->vm_flags & VM_HUGETLB);
+}
+
+#else
+
+static inline int is_vm_hugetlb_page(struct vm_area_struct *vma)
+{
+	return 0;
+}
+
+#endif
+
+#endif
diff --git a/include/linux/hw_breakpoint.h b/include/linux/hw_breakpoint.h
new file mode 100644
index 00000000..6ae9c631
--- /dev/null
+++ b/include/linux/hw_breakpoint.h
@@ -0,0 +1,156 @@
+#ifndef _LINUX_HW_BREAKPOINT_H
+#define _LINUX_HW_BREAKPOINT_H
+
+enum {
+	HW_BREAKPOINT_LEN_1 = 1,
+	HW_BREAKPOINT_LEN_2 = 2,
+	HW_BREAKPOINT_LEN_4 = 4,
+	HW_BREAKPOINT_LEN_8 = 8,
+};
+
+enum {
+	HW_BREAKPOINT_EMPTY	= 0,
+	HW_BREAKPOINT_R		= 1,
+	HW_BREAKPOINT_W		= 2,
+	HW_BREAKPOINT_RW	= HW_BREAKPOINT_R | HW_BREAKPOINT_W,
+	HW_BREAKPOINT_X		= 4,
+	HW_BREAKPOINT_INVALID   = HW_BREAKPOINT_RW | HW_BREAKPOINT_X,
+};
+
+enum bp_type_idx {
+	TYPE_INST 	= 0,
+#ifdef CONFIG_HAVE_MIXED_BREAKPOINTS_REGS
+	TYPE_DATA	= 0,
+#else
+	TYPE_DATA	= 1,
+#endif
+	TYPE_MAX
+};
+
+#ifdef __KERNEL__
+
+#include <linux/perf_event.h>
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+
+extern int __init init_hw_breakpoint(void);
+
+static inline void hw_breakpoint_init(struct perf_event_attr *attr)
+{
+	memset(attr, 0, sizeof(*attr));
+
+	attr->type = PERF_TYPE_BREAKPOINT;
+	attr->size = sizeof(*attr);
+	/*
+	 * As it's for in-kernel or ptrace use, we want it to be pinned
+	 * and to call its callback every hits.
+	 */
+	attr->pinned = 1;
+	attr->sample_period = 1;
+}
+
+static inline void ptrace_breakpoint_init(struct perf_event_attr *attr)
+{
+	hw_breakpoint_init(attr);
+	attr->exclude_kernel = 1;
+}
+
+static inline unsigned long hw_breakpoint_addr(struct perf_event *bp)
+{
+	return bp->attr.bp_addr;
+}
+
+static inline int hw_breakpoint_type(struct perf_event *bp)
+{
+	return bp->attr.bp_type;
+}
+
+static inline unsigned long hw_breakpoint_len(struct perf_event *bp)
+{
+	return bp->attr.bp_len;
+}
+
+extern struct perf_event *
+register_user_hw_breakpoint(struct perf_event_attr *attr,
+			    perf_overflow_handler_t triggered,
+			    void *context,
+			    struct task_struct *tsk);
+
+/* FIXME: only change from the attr, and don't unregister */
+extern int
+modify_user_hw_breakpoint(struct perf_event *bp, struct perf_event_attr *attr);
+
+/*
+ * Kernel breakpoints are not associated with any particular thread.
+ */
+extern struct perf_event *
+register_wide_hw_breakpoint_cpu(struct perf_event_attr *attr,
+				perf_overflow_handler_t	triggered,
+				void *context,
+				int cpu);
+
+extern struct perf_event * __percpu *
+register_wide_hw_breakpoint(struct perf_event_attr *attr,
+			    perf_overflow_handler_t triggered,
+			    void *context);
+
+extern int register_perf_hw_breakpoint(struct perf_event *bp);
+extern int __register_perf_hw_breakpoint(struct perf_event *bp);
+extern void unregister_hw_breakpoint(struct perf_event *bp);
+extern void unregister_wide_hw_breakpoint(struct perf_event * __percpu *cpu_events);
+
+extern int dbg_reserve_bp_slot(struct perf_event *bp);
+extern int dbg_release_bp_slot(struct perf_event *bp);
+extern int reserve_bp_slot(struct perf_event *bp);
+extern void release_bp_slot(struct perf_event *bp);
+
+extern void flush_ptrace_hw_breakpoint(struct task_struct *tsk);
+
+static inline struct arch_hw_breakpoint *counter_arch_bp(struct perf_event *bp)
+{
+	return &bp->hw.info;
+}
+
+#else /* !CONFIG_HAVE_HW_BREAKPOINT */
+
+static inline int __init init_hw_breakpoint(void) { return 0; }
+
+static inline struct perf_event *
+register_user_hw_breakpoint(struct perf_event_attr *attr,
+			    perf_overflow_handler_t triggered,
+			    void *context,
+			    struct task_struct *tsk)	{ return NULL; }
+static inline int
+modify_user_hw_breakpoint(struct perf_event *bp,
+			  struct perf_event_attr *attr)	{ return -ENOSYS; }
+static inline struct perf_event *
+register_wide_hw_breakpoint_cpu(struct perf_event_attr *attr,
+				perf_overflow_handler_t	 triggered,
+				void *context,
+				int cpu)		{ return NULL; }
+static inline struct perf_event * __percpu *
+register_wide_hw_breakpoint(struct perf_event_attr *attr,
+			    perf_overflow_handler_t triggered,
+			    void *context)		{ return NULL; }
+static inline int
+register_perf_hw_breakpoint(struct perf_event *bp)	{ return -ENOSYS; }
+static inline int
+__register_perf_hw_breakpoint(struct perf_event *bp) 	{ return -ENOSYS; }
+static inline void unregister_hw_breakpoint(struct perf_event *bp)	{ }
+static inline void
+unregister_wide_hw_breakpoint(struct perf_event * __percpu *cpu_events)	{ }
+static inline int
+reserve_bp_slot(struct perf_event *bp)			{return -ENOSYS; }
+static inline void release_bp_slot(struct perf_event *bp) 		{ }
+
+static inline void flush_ptrace_hw_breakpoint(struct task_struct *tsk)	{ }
+
+static inline struct arch_hw_breakpoint *counter_arch_bp(struct perf_event *bp)
+{
+	return NULL;
+}
+
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_HW_BREAKPOINT_H */
diff --git a/include/linux/hw_random.h b/include/linux/hw_random.h
new file mode 100644
index 00000000..b4b0eef5
--- /dev/null
+++ b/include/linux/hw_random.h
@@ -0,0 +1,51 @@
+/*
+	Hardware Random Number Generator
+
+	Please read Documentation/hw_random.txt for details on use.
+
+	----------------------------------------------------------
+	This software may be used and distributed according to the terms
+        of the GNU General Public License, incorporated herein by reference.
+
+ */
+
+#ifndef LINUX_HWRANDOM_H_
+#define LINUX_HWRANDOM_H_
+
+#include <linux/types.h>
+#include <linux/list.h>
+
+/**
+ * struct hwrng - Hardware Random Number Generator driver
+ * @name:		Unique RNG name.
+ * @init:		Initialization callback (can be NULL).
+ * @cleanup:		Cleanup callback (can be NULL).
+ * @data_present:	Callback to determine if data is available
+ *			on the RNG. If NULL, it is assumed that
+ *			there is always data available.  *OBSOLETE*
+ * @data_read:		Read data from the RNG device.
+ *			Returns the number of lower random bytes in "data".
+ *			Must not be NULL.    *OBSOLETE*
+ * @read:		New API. drivers can fill up to max bytes of data
+ *			into the buffer. The buffer is aligned for any type.
+ * @priv:		Private data, for use by the RNG driver.
+ */
+struct hwrng {
+	const char *name;
+	int (*init)(struct hwrng *rng);
+	void (*cleanup)(struct hwrng *rng);
+	int (*data_present)(struct hwrng *rng, int wait);
+	int (*data_read)(struct hwrng *rng, u32 *data);
+	int (*read)(struct hwrng *rng, void *data, size_t max, bool wait);
+	unsigned long priv;
+
+	/* internal. */
+	struct list_head list;
+};
+
+/** Register a new Hardware Random Number Generator driver. */
+extern int hwrng_register(struct hwrng *rng);
+/** Unregister a Hardware Random Number Generator driver. */
+extern void hwrng_unregister(struct hwrng *rng);
+
+#endif /* LINUX_HWRANDOM_H_ */
diff --git a/include/linux/hwmon-sysfs.h b/include/linux/hwmon-sysfs.h
new file mode 100644
index 00000000..1c7b89ae
--- /dev/null
+++ b/include/linux/hwmon-sysfs.h
@@ -0,0 +1,57 @@
+/*
+ *  hwmon-sysfs.h - hardware monitoring chip driver sysfs defines
+ *
+ *  Copyright (C) 2005 Yani Ioannou <yani.ioannou@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef _LINUX_HWMON_SYSFS_H
+#define _LINUX_HWMON_SYSFS_H
+
+#include <linux/device.h>
+
+struct sensor_device_attribute{
+	struct device_attribute dev_attr;
+	int index;
+};
+#define to_sensor_dev_attr(_dev_attr) \
+	container_of(_dev_attr, struct sensor_device_attribute, dev_attr)
+
+#define SENSOR_ATTR(_name, _mode, _show, _store, _index)	\
+	{ .dev_attr = __ATTR(_name, _mode, _show, _store),	\
+	  .index = _index }
+
+#define SENSOR_DEVICE_ATTR(_name, _mode, _show, _store, _index)	\
+struct sensor_device_attribute sensor_dev_attr_##_name		\
+	= SENSOR_ATTR(_name, _mode, _show, _store, _index)
+
+struct sensor_device_attribute_2 {
+	struct device_attribute dev_attr;
+	u8 index;
+	u8 nr;
+};
+#define to_sensor_dev_attr_2(_dev_attr) \
+	container_of(_dev_attr, struct sensor_device_attribute_2, dev_attr)
+
+#define SENSOR_ATTR_2(_name, _mode, _show, _store, _nr, _index)	\
+	{ .dev_attr = __ATTR(_name, _mode, _show, _store),	\
+	  .index = _index,					\
+	  .nr = _nr }
+
+#define SENSOR_DEVICE_ATTR_2(_name,_mode,_show,_store,_nr,_index)	\
+struct sensor_device_attribute_2 sensor_dev_attr_##_name		\
+	= SENSOR_ATTR_2(_name, _mode, _show, _store, _nr, _index)
+
+#endif /* _LINUX_HWMON_SYSFS_H */
diff --git a/include/linux/hwmon-vid.h b/include/linux/hwmon-vid.h
new file mode 100644
index 00000000..f346e4d5
--- /dev/null
+++ b/include/linux/hwmon-vid.h
@@ -0,0 +1,45 @@
+/*
+    hwmon-vid.h - VID/VRM/VRD voltage conversions
+
+    Originally part of lm_sensors
+    Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
+    With assistance from Trent Piepho <xyzzy@speakeasy.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _LINUX_HWMON_VID_H
+#define _LINUX_HWMON_VID_H
+
+int vid_from_reg(int val, u8 vrm);
+u8 vid_which_vrm(void);
+
+/* vrm is the VRM/VRD document version multiplied by 10.
+   val is in mV to avoid floating point in the kernel.
+   Returned value is the 4-, 5- or 6-bit VID code.
+   Note that only VRM 9.x is supported for now. */
+static inline int vid_to_reg(int val, u8 vrm)
+{
+	switch (vrm) {
+	case 91:		/* VRM 9.1 */
+	case 90:		/* VRM 9.0 */
+		return ((val >= 1100) && (val <= 1850) ?
+			((18499 - val * 10) / 25 + 5) / 10 : -1);
+	default:
+		return -1;
+	}
+}
+
+#endif /* _LINUX_HWMON_VID_H */
diff --git a/include/linux/hwmon.h b/include/linux/hwmon.h
new file mode 100644
index 00000000..82b29ae6
--- /dev/null
+++ b/include/linux/hwmon.h
@@ -0,0 +1,35 @@
+/*
+    hwmon.h - part of lm_sensors, Linux kernel modules for hardware monitoring
+
+    This file declares helper functions for the sysfs class "hwmon",
+    for use by sensors drivers.
+
+    Copyright (C) 2005 Mark M. Hoffman <mhoffman@lightlink.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; version 2 of the License.
+*/
+
+#ifndef _HWMON_H_
+#define _HWMON_H_
+
+struct device;
+
+struct device *hwmon_device_register(struct device *dev);
+
+void hwmon_device_unregister(struct device *dev);
+
+/* Scale user input to sensible values */
+static inline int SENSORS_LIMIT(long value, long low, long high)
+{
+	if (value < low)
+		return low;
+	else if (value > high)
+		return high;
+	else
+		return value;
+}
+
+#endif
+
diff --git a/include/linux/hwspinlock.h b/include/linux/hwspinlock.h
new file mode 100644
index 00000000..3343298e
--- /dev/null
+++ b/include/linux/hwspinlock.h
@@ -0,0 +1,313 @@
+/*
+ * Hardware spinlock public header
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Contact: Ohad Ben-Cohen <ohad@wizery.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_HWSPINLOCK_H
+#define __LINUX_HWSPINLOCK_H
+
+#include <linux/err.h>
+#include <linux/sched.h>
+
+/* hwspinlock mode argument */
+#define HWLOCK_IRQSTATE	0x01	/* Disable interrupts, save state */
+#define HWLOCK_IRQ	0x02	/* Disable interrupts, don't save state */
+
+struct device;
+struct hwspinlock;
+struct hwspinlock_device;
+struct hwspinlock_ops;
+
+/**
+ * struct hwspinlock_pdata - platform data for hwspinlock drivers
+ * @base_id: base id for this hwspinlock device
+ *
+ * hwspinlock devices provide system-wide hardware locks that are used
+ * by remote processors that have no other way to achieve synchronization.
+ *
+ * To achieve that, each physical lock must have a system-wide id number
+ * that is agreed upon, otherwise remote processors can't possibly assume
+ * they're using the same hardware lock.
+ *
+ * Usually boards have a single hwspinlock device, which provides several
+ * hwspinlocks, and in this case, they can be trivially numbered 0 to
+ * (num-of-locks - 1).
+ *
+ * In case boards have several hwspinlocks devices, a different base id
+ * should be used for each hwspinlock device (they can't all use 0 as
+ * a starting id!).
+ *
+ * This platform data structure should be used to provide the base id
+ * for each device (which is trivially 0 when only a single hwspinlock
+ * device exists). It can be shared between different platforms, hence
+ * its location.
+ */
+struct hwspinlock_pdata {
+	int base_id;
+};
+
+#if defined(CONFIG_HWSPINLOCK) || defined(CONFIG_HWSPINLOCK_MODULE)
+
+int hwspin_lock_register(struct hwspinlock_device *bank, struct device *dev,
+		const struct hwspinlock_ops *ops, int base_id, int num_locks);
+int hwspin_lock_unregister(struct hwspinlock_device *bank);
+struct hwspinlock *hwspin_lock_request(void);
+struct hwspinlock *hwspin_lock_request_specific(unsigned int id);
+int hwspin_lock_free(struct hwspinlock *hwlock);
+int hwspin_lock_get_id(struct hwspinlock *hwlock);
+int __hwspin_lock_timeout(struct hwspinlock *, unsigned int, int,
+							unsigned long *);
+int __hwspin_trylock(struct hwspinlock *, int, unsigned long *);
+void __hwspin_unlock(struct hwspinlock *, int, unsigned long *);
+
+#else /* !CONFIG_HWSPINLOCK */
+
+/*
+ * We don't want these functions to fail if CONFIG_HWSPINLOCK is not
+ * enabled. We prefer to silently succeed in this case, and let the
+ * code path get compiled away. This way, if CONFIG_HWSPINLOCK is not
+ * required on a given setup, users will still work.
+ *
+ * The only exception is hwspin_lock_register/hwspin_lock_unregister, with which
+ * we _do_ want users to fail (no point in registering hwspinlock instances if
+ * the framework is not available).
+ *
+ * Note: ERR_PTR(-ENODEV) will still be considered a success for NULL-checking
+ * users. Others, which care, can still check this with IS_ERR.
+ */
+static inline struct hwspinlock *hwspin_lock_request(void)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline struct hwspinlock *hwspin_lock_request_specific(unsigned int id)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline int hwspin_lock_free(struct hwspinlock *hwlock)
+{
+	return 0;
+}
+
+static inline
+int __hwspin_lock_timeout(struct hwspinlock *hwlock, unsigned int to,
+					int mode, unsigned long *flags)
+{
+	return 0;
+}
+
+static inline
+int __hwspin_trylock(struct hwspinlock *hwlock, int mode, unsigned long *flags)
+{
+	return 0;
+}
+
+static inline
+void __hwspin_unlock(struct hwspinlock *hwlock, int mode, unsigned long *flags)
+{
+}
+
+static inline int hwspin_lock_get_id(struct hwspinlock *hwlock)
+{
+	return 0;
+}
+
+#endif /* !CONFIG_HWSPINLOCK */
+
+/**
+ * hwspin_trylock_irqsave() - try to lock an hwspinlock, disable interrupts
+ * @hwlock: an hwspinlock which we want to trylock
+ * @flags: a pointer to where the caller's interrupt state will be saved at
+ *
+ * This function attempts to lock the underlying hwspinlock, and will
+ * immediately fail if the hwspinlock is already locked.
+ *
+ * Upon a successful return from this function, preemption and local
+ * interrupts are disabled (previous interrupts state is saved at @flags),
+ * so the caller must not sleep, and is advised to release the hwspinlock
+ * as soon as possible.
+ *
+ * Returns 0 if we successfully locked the hwspinlock, -EBUSY if
+ * the hwspinlock was already taken, and -EINVAL if @hwlock is invalid.
+ */
+static inline
+int hwspin_trylock_irqsave(struct hwspinlock *hwlock, unsigned long *flags)
+{
+	return __hwspin_trylock(hwlock, HWLOCK_IRQSTATE, flags);
+}
+
+/**
+ * hwspin_trylock_irq() - try to lock an hwspinlock, disable interrupts
+ * @hwlock: an hwspinlock which we want to trylock
+ *
+ * This function attempts to lock the underlying hwspinlock, and will
+ * immediately fail if the hwspinlock is already locked.
+ *
+ * Upon a successful return from this function, preemption and local
+ * interrupts are disabled, so the caller must not sleep, and is advised
+ * to release the hwspinlock as soon as possible.
+ *
+ * Returns 0 if we successfully locked the hwspinlock, -EBUSY if
+ * the hwspinlock was already taken, and -EINVAL if @hwlock is invalid.
+ */
+static inline int hwspin_trylock_irq(struct hwspinlock *hwlock)
+{
+	return __hwspin_trylock(hwlock, HWLOCK_IRQ, NULL);
+}
+
+/**
+ * hwspin_trylock() - attempt to lock a specific hwspinlock
+ * @hwlock: an hwspinlock which we want to trylock
+ *
+ * This function attempts to lock an hwspinlock, and will immediately fail
+ * if the hwspinlock is already taken.
+ *
+ * Upon a successful return from this function, preemption is disabled,
+ * so the caller must not sleep, and is advised to release the hwspinlock
+ * as soon as possible. This is required in order to minimize remote cores
+ * polling on the hardware interconnect.
+ *
+ * Returns 0 if we successfully locked the hwspinlock, -EBUSY if
+ * the hwspinlock was already taken, and -EINVAL if @hwlock is invalid.
+ */
+static inline int hwspin_trylock(struct hwspinlock *hwlock)
+{
+	return __hwspin_trylock(hwlock, 0, NULL);
+}
+
+/**
+ * hwspin_lock_timeout_irqsave() - lock hwspinlock, with timeout, disable irqs
+ * @hwlock: the hwspinlock to be locked
+ * @to: timeout value in msecs
+ * @flags: a pointer to where the caller's interrupt state will be saved at
+ *
+ * This function locks the underlying @hwlock. If the @hwlock
+ * is already taken, the function will busy loop waiting for it to
+ * be released, but give up when @timeout msecs have elapsed.
+ *
+ * Upon a successful return from this function, preemption and local interrupts
+ * are disabled (plus previous interrupt state is saved), so the caller must
+ * not sleep, and is advised to release the hwspinlock as soon as possible.
+ *
+ * Returns 0 when the @hwlock was successfully taken, and an appropriate
+ * error code otherwise (most notably an -ETIMEDOUT if the @hwlock is still
+ * busy after @timeout msecs). The function will never sleep.
+ */
+static inline int hwspin_lock_timeout_irqsave(struct hwspinlock *hwlock,
+				unsigned int to, unsigned long *flags)
+{
+	return __hwspin_lock_timeout(hwlock, to, HWLOCK_IRQSTATE, flags);
+}
+
+/**
+ * hwspin_lock_timeout_irq() - lock hwspinlock, with timeout, disable irqs
+ * @hwlock: the hwspinlock to be locked
+ * @to: timeout value in msecs
+ *
+ * This function locks the underlying @hwlock. If the @hwlock
+ * is already taken, the function will busy loop waiting for it to
+ * be released, but give up when @timeout msecs have elapsed.
+ *
+ * Upon a successful return from this function, preemption and local interrupts
+ * are disabled so the caller must not sleep, and is advised to release the
+ * hwspinlock as soon as possible.
+ *
+ * Returns 0 when the @hwlock was successfully taken, and an appropriate
+ * error code otherwise (most notably an -ETIMEDOUT if the @hwlock is still
+ * busy after @timeout msecs). The function will never sleep.
+ */
+static inline
+int hwspin_lock_timeout_irq(struct hwspinlock *hwlock, unsigned int to)
+{
+	return __hwspin_lock_timeout(hwlock, to, HWLOCK_IRQ, NULL);
+}
+
+/**
+ * hwspin_lock_timeout() - lock an hwspinlock with timeout limit
+ * @hwlock: the hwspinlock to be locked
+ * @to: timeout value in msecs
+ *
+ * This function locks the underlying @hwlock. If the @hwlock
+ * is already taken, the function will busy loop waiting for it to
+ * be released, but give up when @timeout msecs have elapsed.
+ *
+ * Upon a successful return from this function, preemption is disabled
+ * so the caller must not sleep, and is advised to release the hwspinlock
+ * as soon as possible.
+ * This is required in order to minimize remote cores polling on the
+ * hardware interconnect.
+ *
+ * Returns 0 when the @hwlock was successfully taken, and an appropriate
+ * error code otherwise (most notably an -ETIMEDOUT if the @hwlock is still
+ * busy after @timeout msecs). The function will never sleep.
+ */
+static inline
+int hwspin_lock_timeout(struct hwspinlock *hwlock, unsigned int to)
+{
+	return __hwspin_lock_timeout(hwlock, to, 0, NULL);
+}
+
+/**
+ * hwspin_unlock_irqrestore() - unlock hwspinlock, restore irq state
+ * @hwlock: a previously-acquired hwspinlock which we want to unlock
+ * @flags: previous caller's interrupt state to restore
+ *
+ * This function will unlock a specific hwspinlock, enable preemption and
+ * restore the previous state of the local interrupts. It should be used
+ * to undo, e.g., hwspin_trylock_irqsave().
+ *
+ * @hwlock must be already locked before calling this function: it is a bug
+ * to call unlock on a @hwlock that is already unlocked.
+ */
+static inline void hwspin_unlock_irqrestore(struct hwspinlock *hwlock,
+							unsigned long *flags)
+{
+	__hwspin_unlock(hwlock, HWLOCK_IRQSTATE, flags);
+}
+
+/**
+ * hwspin_unlock_irq() - unlock hwspinlock, enable interrupts
+ * @hwlock: a previously-acquired hwspinlock which we want to unlock
+ *
+ * This function will unlock a specific hwspinlock, enable preemption and
+ * enable local interrupts. Should be used to undo hwspin_lock_irq().
+ *
+ * @hwlock must be already locked (e.g. by hwspin_trylock_irq()) before
+ * calling this function: it is a bug to call unlock on a @hwlock that is
+ * already unlocked.
+ */
+static inline void hwspin_unlock_irq(struct hwspinlock *hwlock)
+{
+	__hwspin_unlock(hwlock, HWLOCK_IRQ, NULL);
+}
+
+/**
+ * hwspin_unlock() - unlock hwspinlock
+ * @hwlock: a previously-acquired hwspinlock which we want to unlock
+ *
+ * This function will unlock a specific hwspinlock and enable preemption
+ * back.
+ *
+ * @hwlock must be already locked (e.g. by hwspin_trylock()) before calling
+ * this function: it is a bug to call unlock on a @hwlock that is already
+ * unlocked.
+ */
+static inline void hwspin_unlock(struct hwspinlock *hwlock)
+{
+	__hwspin_unlock(hwlock, 0, NULL);
+}
+
+#endif /* __LINUX_HWSPINLOCK_H */
diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
new file mode 100644
index 00000000..5852545e
--- /dev/null
+++ b/include/linux/hyperv.h
@@ -0,0 +1,1046 @@
+/*
+ *
+ * Copyright (c) 2011, Microsoft Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * Authors:
+ *   Haiyang Zhang <haiyangz@microsoft.com>
+ *   Hank Janssen  <hjanssen@microsoft.com>
+ *   K. Y. Srinivasan <kys@microsoft.com>
+ *
+ */
+
+#ifndef _HYPERV_H
+#define _HYPERV_H
+
+#include <linux/types.h>
+
+/*
+ * An implementation of HyperV key value pair (KVP) functionality for Linux.
+ *
+ *
+ * Copyright (C) 2010, Novell, Inc.
+ * Author : K. Y. Srinivasan <ksrinivasan@novell.com>
+ *
+ */
+
+/*
+ * Maximum value size - used for both key names and value data, and includes
+ * any applicable NULL terminators.
+ *
+ * Note:  This limit is somewhat arbitrary, but falls easily within what is
+ * supported for all native guests (back to Win 2000) and what is reasonable
+ * for the IC KVP exchange functionality.  Note that Windows Me/98/95 are
+ * limited to 255 character key names.
+ *
+ * MSDN recommends not storing data values larger than 2048 bytes in the
+ * registry.
+ *
+ * Note:  This value is used in defining the KVP exchange message - this value
+ * cannot be modified without affecting the message size and compatibility.
+ */
+
+/*
+ * bytes, including any null terminators
+ */
+#define HV_KVP_EXCHANGE_MAX_VALUE_SIZE          (2048)
+
+
+/*
+ * Maximum key size - the registry limit for the length of an entry name
+ * is 256 characters, including the null terminator
+ */
+
+#define HV_KVP_EXCHANGE_MAX_KEY_SIZE            (512)
+
+/*
+ * In Linux, we implement the KVP functionality in two components:
+ * 1) The kernel component which is packaged as part of the hv_utils driver
+ * is responsible for communicating with the host and responsible for
+ * implementing the host/guest protocol. 2) A user level daemon that is
+ * responsible for data gathering.
+ *
+ * Host/Guest Protocol: The host iterates over an index and expects the guest
+ * to assign a key name to the index and also return the value corresponding to
+ * the key. The host will have atmost one KVP transaction outstanding at any
+ * given point in time. The host side iteration stops when the guest returns
+ * an error. Microsoft has specified the following mapping of key names to
+ * host specified index:
+ *
+ *	Index		Key Name
+ *	0		FullyQualifiedDomainName
+ *	1		IntegrationServicesVersion
+ *	2		NetworkAddressIPv4
+ *	3		NetworkAddressIPv6
+ *	4		OSBuildNumber
+ *	5		OSName
+ *	6		OSMajorVersion
+ *	7		OSMinorVersion
+ *	8		OSVersion
+ *	9		ProcessorArchitecture
+ *
+ * The Windows host expects the Key Name and Key Value to be encoded in utf16.
+ *
+ * Guest Kernel/KVP Daemon Protocol: As noted earlier, we implement all of the
+ * data gathering functionality in a user mode daemon. The user level daemon
+ * is also responsible for binding the key name to the index as well. The
+ * kernel and user-level daemon communicate using a connector channel.
+ *
+ * The user mode component first registers with the
+ * the kernel component. Subsequently, the kernel component requests, data
+ * for the specified keys. In response to this message the user mode component
+ * fills in the value corresponding to the specified key. We overload the
+ * sequence field in the cn_msg header to define our KVP message types.
+ *
+ *
+ * The kernel component simply acts as a conduit for communication between the
+ * Windows host and the user-level daemon. The kernel component passes up the
+ * index received from the Host to the user-level daemon. If the index is
+ * valid (supported), the corresponding key as well as its
+ * value (both are strings) is returned. If the index is invalid
+ * (not supported), a NULL key string is returned.
+ */
+
+
+/*
+ * Registry value types.
+ */
+
+#define REG_SZ 1
+#define REG_U32 4
+#define REG_U64 8
+
+enum hv_kvp_exchg_op {
+	KVP_OP_GET = 0,
+	KVP_OP_SET,
+	KVP_OP_DELETE,
+	KVP_OP_ENUMERATE,
+	KVP_OP_REGISTER,
+	KVP_OP_COUNT /* Number of operations, must be last. */
+};
+
+enum hv_kvp_exchg_pool {
+	KVP_POOL_EXTERNAL = 0,
+	KVP_POOL_GUEST,
+	KVP_POOL_AUTO,
+	KVP_POOL_AUTO_EXTERNAL,
+	KVP_POOL_AUTO_INTERNAL,
+	KVP_POOL_COUNT /* Number of pools, must be last. */
+};
+
+struct hv_kvp_hdr {
+	__u8 operation;
+	__u8 pool;
+	__u16 pad;
+} __attribute__((packed));
+
+struct hv_kvp_exchg_msg_value {
+	__u32 value_type;
+	__u32 key_size;
+	__u32 value_size;
+	__u8 key[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
+	union {
+		__u8 value[HV_KVP_EXCHANGE_MAX_VALUE_SIZE];
+		__u32 value_u32;
+		__u64 value_u64;
+	};
+} __attribute__((packed));
+
+struct hv_kvp_msg_enumerate {
+	__u32 index;
+	struct hv_kvp_exchg_msg_value data;
+} __attribute__((packed));
+
+struct hv_kvp_msg_get {
+	struct hv_kvp_exchg_msg_value data;
+};
+
+struct hv_kvp_msg_set {
+	struct hv_kvp_exchg_msg_value data;
+};
+
+struct hv_kvp_msg_delete {
+	__u32 key_size;
+	__u8 key[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
+};
+
+struct hv_kvp_register {
+	__u8 version[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
+};
+
+struct hv_kvp_msg {
+	struct hv_kvp_hdr	kvp_hdr;
+	union {
+		struct hv_kvp_msg_get		kvp_get;
+		struct hv_kvp_msg_set		kvp_set;
+		struct hv_kvp_msg_delete	kvp_delete;
+		struct hv_kvp_msg_enumerate	kvp_enum_data;
+		struct hv_kvp_register		kvp_register;
+	} body;
+} __attribute__((packed));
+
+#ifdef __KERNEL__
+#include <linux/scatterlist.h>
+#include <linux/list.h>
+#include <linux/uuid.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+
+
+#define MAX_PAGE_BUFFER_COUNT				19
+#define MAX_MULTIPAGE_BUFFER_COUNT			32 /* 128K */
+
+#pragma pack(push, 1)
+
+/* Single-page buffer */
+struct hv_page_buffer {
+	u32 len;
+	u32 offset;
+	u64 pfn;
+};
+
+/* Multiple-page buffer */
+struct hv_multipage_buffer {
+	/* Length and Offset determines the # of pfns in the array */
+	u32 len;
+	u32 offset;
+	u64 pfn_array[MAX_MULTIPAGE_BUFFER_COUNT];
+};
+
+/* 0x18 includes the proprietary packet header */
+#define MAX_PAGE_BUFFER_PACKET		(0x18 +			\
+					(sizeof(struct hv_page_buffer) * \
+					 MAX_PAGE_BUFFER_COUNT))
+#define MAX_MULTIPAGE_BUFFER_PACKET	(0x18 +			\
+					 sizeof(struct hv_multipage_buffer))
+
+
+#pragma pack(pop)
+
+struct hv_ring_buffer {
+	/* Offset in bytes from the start of ring data below */
+	u32 write_index;
+
+	/* Offset in bytes from the start of ring data below */
+	u32 read_index;
+
+	u32 interrupt_mask;
+
+	/* Pad it to PAGE_SIZE so that data starts on page boundary */
+	u8	reserved[4084];
+
+	/* NOTE:
+	 * The interrupt_mask field is used only for channels but since our
+	 * vmbus connection also uses this data structure and its data starts
+	 * here, we commented out this field.
+	 */
+
+	/*
+	 * Ring data starts here + RingDataStartOffset
+	 * !!! DO NOT place any fields below this !!!
+	 */
+	u8 buffer[0];
+} __packed;
+
+struct hv_ring_buffer_info {
+	struct hv_ring_buffer *ring_buffer;
+	u32 ring_size;			/* Include the shared header */
+	spinlock_t ring_lock;
+
+	u32 ring_datasize;		/* < ring_size */
+	u32 ring_data_startoffset;
+};
+
+struct hv_ring_buffer_debug_info {
+	u32 current_interrupt_mask;
+	u32 current_read_index;
+	u32 current_write_index;
+	u32 bytes_avail_toread;
+	u32 bytes_avail_towrite;
+};
+
+/*
+ * We use the same version numbering for all Hyper-V modules.
+ *
+ * Definition of versioning is as follows;
+ *
+ *	Major Number	Changes for these scenarios;
+ *			1.	When a new version of Windows Hyper-V
+ *				is released.
+ *			2.	A Major change has occurred in the
+ *				Linux IC's.
+ *			(For example the merge for the first time
+ *			into the kernel) Every time the Major Number
+ *			changes, the Revision number is reset to 0.
+ *	Minor Number	Changes when new functionality is added
+ *			to the Linux IC's that is not a bug fix.
+ *
+ * 3.1 - Added completed hv_utils driver. Shutdown/Heartbeat/Timesync
+ */
+#define HV_DRV_VERSION           "3.1"
+
+
+/*
+ * A revision number of vmbus that is used for ensuring both ends on a
+ * partition are using compatible versions.
+ */
+#define VMBUS_REVISION_NUMBER		13
+
+/* Make maximum size of pipe payload of 16K */
+#define MAX_PIPE_DATA_PAYLOAD		(sizeof(u8) * 16384)
+
+/* Define PipeMode values. */
+#define VMBUS_PIPE_TYPE_BYTE		0x00000000
+#define VMBUS_PIPE_TYPE_MESSAGE		0x00000004
+
+/* The size of the user defined data buffer for non-pipe offers. */
+#define MAX_USER_DEFINED_BYTES		120
+
+/* The size of the user defined data buffer for pipe offers. */
+#define MAX_PIPE_USER_DEFINED_BYTES	116
+
+/*
+ * At the center of the Channel Management library is the Channel Offer. This
+ * struct contains the fundamental information about an offer.
+ */
+struct vmbus_channel_offer {
+	uuid_le if_type;
+	uuid_le if_instance;
+	u64 int_latency; /* in 100ns units */
+	u32 if_revision;
+	u32 server_ctx_size;	/* in bytes */
+	u16 chn_flags;
+	u16 mmio_megabytes;		/* in bytes * 1024 * 1024 */
+
+	union {
+		/* Non-pipes: The user has MAX_USER_DEFINED_BYTES bytes. */
+		struct {
+			unsigned char user_def[MAX_USER_DEFINED_BYTES];
+		} std;
+
+		/*
+		 * Pipes:
+		 * The following sructure is an integrated pipe protocol, which
+		 * is implemented on top of standard user-defined data. Pipe
+		 * clients have MAX_PIPE_USER_DEFINED_BYTES left for their own
+		 * use.
+		 */
+		struct {
+			u32  pipe_mode;
+			unsigned char user_def[MAX_PIPE_USER_DEFINED_BYTES];
+		} pipe;
+	} u;
+	u32 padding;
+} __packed;
+
+/* Server Flags */
+#define VMBUS_CHANNEL_ENUMERATE_DEVICE_INTERFACE	1
+#define VMBUS_CHANNEL_SERVER_SUPPORTS_TRANSFER_PAGES	2
+#define VMBUS_CHANNEL_SERVER_SUPPORTS_GPADLS		4
+#define VMBUS_CHANNEL_NAMED_PIPE_MODE			0x10
+#define VMBUS_CHANNEL_LOOPBACK_OFFER			0x100
+#define VMBUS_CHANNEL_PARENT_OFFER			0x200
+#define VMBUS_CHANNEL_REQUEST_MONITORED_NOTIFICATION	0x400
+
+struct vmpacket_descriptor {
+	u16 type;
+	u16 offset8;
+	u16 len8;
+	u16 flags;
+	u64 trans_id;
+} __packed;
+
+struct vmpacket_header {
+	u32 prev_pkt_start_offset;
+	struct vmpacket_descriptor descriptor;
+} __packed;
+
+struct vmtransfer_page_range {
+	u32 byte_count;
+	u32 byte_offset;
+} __packed;
+
+struct vmtransfer_page_packet_header {
+	struct vmpacket_descriptor d;
+	u16 xfer_pageset_id;
+	bool sender_owns_set;
+	u8 reserved;
+	u32 range_cnt;
+	struct vmtransfer_page_range ranges[1];
+} __packed;
+
+struct vmgpadl_packet_header {
+	struct vmpacket_descriptor d;
+	u32 gpadl;
+	u32 reserved;
+} __packed;
+
+struct vmadd_remove_transfer_page_set {
+	struct vmpacket_descriptor d;
+	u32 gpadl;
+	u16 xfer_pageset_id;
+	u16 reserved;
+} __packed;
+
+/*
+ * This structure defines a range in guest physical space that can be made to
+ * look virtually contiguous.
+ */
+struct gpa_range {
+	u32 byte_count;
+	u32 byte_offset;
+	u64 pfn_array[0];
+};
+
+/*
+ * This is the format for an Establish Gpadl packet, which contains a handle by
+ * which this GPADL will be known and a set of GPA ranges associated with it.
+ * This can be converted to a MDL by the guest OS.  If there are multiple GPA
+ * ranges, then the resulting MDL will be "chained," representing multiple VA
+ * ranges.
+ */
+struct vmestablish_gpadl {
+	struct vmpacket_descriptor d;
+	u32 gpadl;
+	u32 range_cnt;
+	struct gpa_range range[1];
+} __packed;
+
+/*
+ * This is the format for a Teardown Gpadl packet, which indicates that the
+ * GPADL handle in the Establish Gpadl packet will never be referenced again.
+ */
+struct vmteardown_gpadl {
+	struct vmpacket_descriptor d;
+	u32 gpadl;
+	u32 reserved;	/* for alignment to a 8-byte boundary */
+} __packed;
+
+/*
+ * This is the format for a GPA-Direct packet, which contains a set of GPA
+ * ranges, in addition to commands and/or data.
+ */
+struct vmdata_gpa_direct {
+	struct vmpacket_descriptor d;
+	u32 reserved;
+	u32 range_cnt;
+	struct gpa_range range[1];
+} __packed;
+
+/* This is the format for a Additional Data Packet. */
+struct vmadditional_data {
+	struct vmpacket_descriptor d;
+	u64 total_bytes;
+	u32 offset;
+	u32 byte_cnt;
+	unsigned char data[1];
+} __packed;
+
+union vmpacket_largest_possible_header {
+	struct vmpacket_descriptor simple_hdr;
+	struct vmtransfer_page_packet_header xfer_page_hdr;
+	struct vmgpadl_packet_header gpadl_hdr;
+	struct vmadd_remove_transfer_page_set add_rm_xfer_page_hdr;
+	struct vmestablish_gpadl establish_gpadl_hdr;
+	struct vmteardown_gpadl teardown_gpadl_hdr;
+	struct vmdata_gpa_direct data_gpa_direct_hdr;
+};
+
+#define VMPACKET_DATA_START_ADDRESS(__packet)	\
+	(void *)(((unsigned char *)__packet) +	\
+	 ((struct vmpacket_descriptor)__packet)->offset8 * 8)
+
+#define VMPACKET_DATA_LENGTH(__packet)		\
+	((((struct vmpacket_descriptor)__packet)->len8 -	\
+	  ((struct vmpacket_descriptor)__packet)->offset8) * 8)
+
+#define VMPACKET_TRANSFER_MODE(__packet)	\
+	(((struct IMPACT)__packet)->type)
+
+enum vmbus_packet_type {
+	VM_PKT_INVALID				= 0x0,
+	VM_PKT_SYNCH				= 0x1,
+	VM_PKT_ADD_XFER_PAGESET			= 0x2,
+	VM_PKT_RM_XFER_PAGESET			= 0x3,
+	VM_PKT_ESTABLISH_GPADL			= 0x4,
+	VM_PKT_TEARDOWN_GPADL			= 0x5,
+	VM_PKT_DATA_INBAND			= 0x6,
+	VM_PKT_DATA_USING_XFER_PAGES		= 0x7,
+	VM_PKT_DATA_USING_GPADL			= 0x8,
+	VM_PKT_DATA_USING_GPA_DIRECT		= 0x9,
+	VM_PKT_CANCEL_REQUEST			= 0xa,
+	VM_PKT_COMP				= 0xb,
+	VM_PKT_DATA_USING_ADDITIONAL_PKT	= 0xc,
+	VM_PKT_ADDITIONAL_DATA			= 0xd
+};
+
+#define VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED	1
+
+
+/* Version 1 messages */
+enum vmbus_channel_message_type {
+	CHANNELMSG_INVALID			=  0,
+	CHANNELMSG_OFFERCHANNEL		=  1,
+	CHANNELMSG_RESCIND_CHANNELOFFER	=  2,
+	CHANNELMSG_REQUESTOFFERS		=  3,
+	CHANNELMSG_ALLOFFERS_DELIVERED	=  4,
+	CHANNELMSG_OPENCHANNEL		=  5,
+	CHANNELMSG_OPENCHANNEL_RESULT		=  6,
+	CHANNELMSG_CLOSECHANNEL		=  7,
+	CHANNELMSG_GPADL_HEADER		=  8,
+	CHANNELMSG_GPADL_BODY			=  9,
+	CHANNELMSG_GPADL_CREATED		= 10,
+	CHANNELMSG_GPADL_TEARDOWN		= 11,
+	CHANNELMSG_GPADL_TORNDOWN		= 12,
+	CHANNELMSG_RELID_RELEASED		= 13,
+	CHANNELMSG_INITIATE_CONTACT		= 14,
+	CHANNELMSG_VERSION_RESPONSE		= 15,
+	CHANNELMSG_UNLOAD			= 16,
+#ifdef VMBUS_FEATURE_PARENT_OR_PEER_MEMORY_MAPPED_INTO_A_CHILD
+	CHANNELMSG_VIEWRANGE_ADD		= 17,
+	CHANNELMSG_VIEWRANGE_REMOVE		= 18,
+#endif
+	CHANNELMSG_COUNT
+};
+
+struct vmbus_channel_message_header {
+	enum vmbus_channel_message_type msgtype;
+	u32 padding;
+} __packed;
+
+/* Query VMBus Version parameters */
+struct vmbus_channel_query_vmbus_version {
+	struct vmbus_channel_message_header header;
+	u32 version;
+} __packed;
+
+/* VMBus Version Supported parameters */
+struct vmbus_channel_version_supported {
+	struct vmbus_channel_message_header header;
+	bool version_supported;
+} __packed;
+
+/* Offer Channel parameters */
+struct vmbus_channel_offer_channel {
+	struct vmbus_channel_message_header header;
+	struct vmbus_channel_offer offer;
+	u32 child_relid;
+	u8 monitorid;
+	bool monitor_allocated;
+} __packed;
+
+/* Rescind Offer parameters */
+struct vmbus_channel_rescind_offer {
+	struct vmbus_channel_message_header header;
+	u32 child_relid;
+} __packed;
+
+/*
+ * Request Offer -- no parameters, SynIC message contains the partition ID
+ * Set Snoop -- no parameters, SynIC message contains the partition ID
+ * Clear Snoop -- no parameters, SynIC message contains the partition ID
+ * All Offers Delivered -- no parameters, SynIC message contains the partition
+ *		           ID
+ * Flush Client -- no parameters, SynIC message contains the partition ID
+ */
+
+/* Open Channel parameters */
+struct vmbus_channel_open_channel {
+	struct vmbus_channel_message_header header;
+
+	/* Identifies the specific VMBus channel that is being opened. */
+	u32 child_relid;
+
+	/* ID making a particular open request at a channel offer unique. */
+	u32 openid;
+
+	/* GPADL for the channel's ring buffer. */
+	u32 ringbuffer_gpadlhandle;
+
+	/* GPADL for the channel's server context save area. */
+	u32 server_contextarea_gpadlhandle;
+
+	/*
+	* The upstream ring buffer begins at offset zero in the memory
+	* described by RingBufferGpadlHandle. The downstream ring buffer
+	* follows it at this offset (in pages).
+	*/
+	u32 downstream_ringbuffer_pageoffset;
+
+	/* User-specific data to be passed along to the server endpoint. */
+	unsigned char userdata[MAX_USER_DEFINED_BYTES];
+} __packed;
+
+/* Open Channel Result parameters */
+struct vmbus_channel_open_result {
+	struct vmbus_channel_message_header header;
+	u32 child_relid;
+	u32 openid;
+	u32 status;
+} __packed;
+
+/* Close channel parameters; */
+struct vmbus_channel_close_channel {
+	struct vmbus_channel_message_header header;
+	u32 child_relid;
+} __packed;
+
+/* Channel Message GPADL */
+#define GPADL_TYPE_RING_BUFFER		1
+#define GPADL_TYPE_SERVER_SAVE_AREA	2
+#define GPADL_TYPE_TRANSACTION		8
+
+/*
+ * The number of PFNs in a GPADL message is defined by the number of
+ * pages that would be spanned by ByteCount and ByteOffset.  If the
+ * implied number of PFNs won't fit in this packet, there will be a
+ * follow-up packet that contains more.
+ */
+struct vmbus_channel_gpadl_header {
+	struct vmbus_channel_message_header header;
+	u32 child_relid;
+	u32 gpadl;
+	u16 range_buflen;
+	u16 rangecount;
+	struct gpa_range range[0];
+} __packed;
+
+/* This is the followup packet that contains more PFNs. */
+struct vmbus_channel_gpadl_body {
+	struct vmbus_channel_message_header header;
+	u32 msgnumber;
+	u32 gpadl;
+	u64 pfn[0];
+} __packed;
+
+struct vmbus_channel_gpadl_created {
+	struct vmbus_channel_message_header header;
+	u32 child_relid;
+	u32 gpadl;
+	u32 creation_status;
+} __packed;
+
+struct vmbus_channel_gpadl_teardown {
+	struct vmbus_channel_message_header header;
+	u32 child_relid;
+	u32 gpadl;
+} __packed;
+
+struct vmbus_channel_gpadl_torndown {
+	struct vmbus_channel_message_header header;
+	u32 gpadl;
+} __packed;
+
+#ifdef VMBUS_FEATURE_PARENT_OR_PEER_MEMORY_MAPPED_INTO_A_CHILD
+struct vmbus_channel_view_range_add {
+	struct vmbus_channel_message_header header;
+	PHYSICAL_ADDRESS viewrange_base;
+	u64 viewrange_length;
+	u32 child_relid;
+} __packed;
+
+struct vmbus_channel_view_range_remove {
+	struct vmbus_channel_message_header header;
+	PHYSICAL_ADDRESS viewrange_base;
+	u32 child_relid;
+} __packed;
+#endif
+
+struct vmbus_channel_relid_released {
+	struct vmbus_channel_message_header header;
+	u32 child_relid;
+} __packed;
+
+struct vmbus_channel_initiate_contact {
+	struct vmbus_channel_message_header header;
+	u32 vmbus_version_requested;
+	u32 padding2;
+	u64 interrupt_page;
+	u64 monitor_page1;
+	u64 monitor_page2;
+} __packed;
+
+struct vmbus_channel_version_response {
+	struct vmbus_channel_message_header header;
+	bool version_supported;
+} __packed;
+
+enum vmbus_channel_state {
+	CHANNEL_OFFER_STATE,
+	CHANNEL_OPENING_STATE,
+	CHANNEL_OPEN_STATE,
+};
+
+struct vmbus_channel_debug_info {
+	u32 relid;
+	enum vmbus_channel_state state;
+	uuid_le interfacetype;
+	uuid_le interface_instance;
+	u32 monitorid;
+	u32 servermonitor_pending;
+	u32 servermonitor_latency;
+	u32 servermonitor_connectionid;
+	u32 clientmonitor_pending;
+	u32 clientmonitor_latency;
+	u32 clientmonitor_connectionid;
+
+	struct hv_ring_buffer_debug_info inbound;
+	struct hv_ring_buffer_debug_info outbound;
+};
+
+/*
+ * Represents each channel msg on the vmbus connection This is a
+ * variable-size data structure depending on the msg type itself
+ */
+struct vmbus_channel_msginfo {
+	/* Bookkeeping stuff */
+	struct list_head msglistentry;
+
+	/* So far, this is only used to handle gpadl body message */
+	struct list_head submsglist;
+
+	/* Synchronize the request/response if needed */
+	struct completion  waitevent;
+	union {
+		struct vmbus_channel_version_supported version_supported;
+		struct vmbus_channel_open_result open_result;
+		struct vmbus_channel_gpadl_torndown gpadl_torndown;
+		struct vmbus_channel_gpadl_created gpadl_created;
+		struct vmbus_channel_version_response version_response;
+	} response;
+
+	u32 msgsize;
+	/*
+	 * The channel message that goes out on the "wire".
+	 * It will contain at minimum the VMBUS_CHANNEL_MESSAGE_HEADER header
+	 */
+	unsigned char msg[0];
+};
+
+struct vmbus_close_msg {
+	struct vmbus_channel_msginfo info;
+	struct vmbus_channel_close_channel msg;
+};
+
+struct vmbus_channel {
+	struct list_head listentry;
+
+	struct hv_device *device_obj;
+
+	struct work_struct work;
+
+	enum vmbus_channel_state state;
+
+	struct vmbus_channel_offer_channel offermsg;
+	/*
+	 * These are based on the OfferMsg.MonitorId.
+	 * Save it here for easy access.
+	 */
+	u8 monitor_grp;
+	u8 monitor_bit;
+
+	u32 ringbuffer_gpadlhandle;
+
+	/* Allocated memory for ring buffer */
+	void *ringbuffer_pages;
+	u32 ringbuffer_pagecount;
+	struct hv_ring_buffer_info outbound;	/* send to parent */
+	struct hv_ring_buffer_info inbound;	/* receive from parent */
+	spinlock_t inbound_lock;
+	struct workqueue_struct *controlwq;
+
+	struct vmbus_close_msg close_msg;
+
+	/* Channel callback are invoked in this workqueue context */
+	/* HANDLE dataWorkQueue; */
+
+	void (*onchannel_callback)(void *context);
+	void *channel_callback_context;
+};
+
+void vmbus_onmessage(void *context);
+
+int vmbus_request_offers(void);
+
+/* The format must be the same as struct vmdata_gpa_direct */
+struct vmbus_channel_packet_page_buffer {
+	u16 type;
+	u16 dataoffset8;
+	u16 length8;
+	u16 flags;
+	u64 transactionid;
+	u32 reserved;
+	u32 rangecount;
+	struct hv_page_buffer range[MAX_PAGE_BUFFER_COUNT];
+} __packed;
+
+/* The format must be the same as struct vmdata_gpa_direct */
+struct vmbus_channel_packet_multipage_buffer {
+	u16 type;
+	u16 dataoffset8;
+	u16 length8;
+	u16 flags;
+	u64 transactionid;
+	u32 reserved;
+	u32 rangecount;		/* Always 1 in this case */
+	struct hv_multipage_buffer range;
+} __packed;
+
+
+extern int vmbus_open(struct vmbus_channel *channel,
+			    u32 send_ringbuffersize,
+			    u32 recv_ringbuffersize,
+			    void *userdata,
+			    u32 userdatalen,
+			    void(*onchannel_callback)(void *context),
+			    void *context);
+
+extern void vmbus_close(struct vmbus_channel *channel);
+
+extern int vmbus_sendpacket(struct vmbus_channel *channel,
+				  const void *buffer,
+				  u32 bufferLen,
+				  u64 requestid,
+				  enum vmbus_packet_type type,
+				  u32 flags);
+
+extern int vmbus_sendpacket_pagebuffer(struct vmbus_channel *channel,
+					    struct hv_page_buffer pagebuffers[],
+					    u32 pagecount,
+					    void *buffer,
+					    u32 bufferlen,
+					    u64 requestid);
+
+extern int vmbus_sendpacket_multipagebuffer(struct vmbus_channel *channel,
+					struct hv_multipage_buffer *mpb,
+					void *buffer,
+					u32 bufferlen,
+					u64 requestid);
+
+extern int vmbus_establish_gpadl(struct vmbus_channel *channel,
+				      void *kbuffer,
+				      u32 size,
+				      u32 *gpadl_handle);
+
+extern int vmbus_teardown_gpadl(struct vmbus_channel *channel,
+				     u32 gpadl_handle);
+
+extern int vmbus_recvpacket(struct vmbus_channel *channel,
+				  void *buffer,
+				  u32 bufferlen,
+				  u32 *buffer_actual_len,
+				  u64 *requestid);
+
+extern int vmbus_recvpacket_raw(struct vmbus_channel *channel,
+				     void *buffer,
+				     u32 bufferlen,
+				     u32 *buffer_actual_len,
+				     u64 *requestid);
+
+
+extern void vmbus_get_debug_info(struct vmbus_channel *channel,
+				     struct vmbus_channel_debug_info *debug);
+
+extern void vmbus_ontimer(unsigned long data);
+
+struct hv_dev_port_info {
+	u32 int_mask;
+	u32 read_idx;
+	u32 write_idx;
+	u32 bytes_avail_toread;
+	u32 bytes_avail_towrite;
+};
+
+/* Base driver object */
+struct hv_driver {
+	const char *name;
+
+	/* the device type supported by this driver */
+	uuid_le dev_type;
+	const struct hv_vmbus_device_id *id_table;
+
+	struct device_driver driver;
+
+	int (*probe)(struct hv_device *, const struct hv_vmbus_device_id *);
+	int (*remove)(struct hv_device *);
+	void (*shutdown)(struct hv_device *);
+
+};
+
+/* Base device object */
+struct hv_device {
+	/* the device type id of this device */
+	uuid_le dev_type;
+
+	/* the device instance id of this device */
+	uuid_le dev_instance;
+
+	struct device device;
+
+	struct vmbus_channel *channel;
+};
+
+
+static inline struct hv_device *device_to_hv_device(struct device *d)
+{
+	return container_of(d, struct hv_device, device);
+}
+
+static inline struct hv_driver *drv_to_hv_drv(struct device_driver *d)
+{
+	return container_of(d, struct hv_driver, driver);
+}
+
+static inline void hv_set_drvdata(struct hv_device *dev, void *data)
+{
+	dev_set_drvdata(&dev->device, data);
+}
+
+static inline void *hv_get_drvdata(struct hv_device *dev)
+{
+	return dev_get_drvdata(&dev->device);
+}
+
+/* Vmbus interface */
+#define vmbus_driver_register(driver)	\
+	__vmbus_driver_register(driver, THIS_MODULE, KBUILD_MODNAME)
+int __must_check __vmbus_driver_register(struct hv_driver *hv_driver,
+					 struct module *owner,
+					 const char *mod_name);
+void vmbus_driver_unregister(struct hv_driver *hv_driver);
+
+/**
+ * VMBUS_DEVICE - macro used to describe a specific hyperv vmbus device
+ *
+ * This macro is used to create a struct hv_vmbus_device_id that matches a
+ * specific device.
+ */
+#define VMBUS_DEVICE(g0, g1, g2, g3, g4, g5, g6, g7,	\
+		     g8, g9, ga, gb, gc, gd, ge, gf)	\
+	.guid = { g0, g1, g2, g3, g4, g5, g6, g7,	\
+		  g8, g9, ga, gb, gc, gd, ge, gf },
+
+/*
+ * Common header for Hyper-V ICs
+ */
+
+#define ICMSGTYPE_NEGOTIATE		0
+#define ICMSGTYPE_HEARTBEAT		1
+#define ICMSGTYPE_KVPEXCHANGE		2
+#define ICMSGTYPE_SHUTDOWN		3
+#define ICMSGTYPE_TIMESYNC		4
+#define ICMSGTYPE_VSS			5
+
+#define ICMSGHDRFLAG_TRANSACTION	1
+#define ICMSGHDRFLAG_REQUEST		2
+#define ICMSGHDRFLAG_RESPONSE		4
+
+#define HV_S_OK				0x00000000
+#define HV_E_FAIL			0x80004005
+#define HV_S_CONT			0x80070103
+#define HV_ERROR_NOT_SUPPORTED		0x80070032
+#define HV_ERROR_MACHINE_LOCKED		0x800704F7
+
+/*
+ * While we want to handle util services as regular devices,
+ * there is only one instance of each of these services; so
+ * we statically allocate the service specific state.
+ */
+
+struct hv_util_service {
+	u8 *recv_buffer;
+	void (*util_cb)(void *);
+	int (*util_init)(struct hv_util_service *);
+	void (*util_deinit)(void);
+};
+
+struct vmbuspipe_hdr {
+	u32 flags;
+	u32 msgsize;
+} __packed;
+
+struct ic_version {
+	u16 major;
+	u16 minor;
+} __packed;
+
+struct icmsg_hdr {
+	struct ic_version icverframe;
+	u16 icmsgtype;
+	struct ic_version icvermsg;
+	u16 icmsgsize;
+	u32 status;
+	u8 ictransaction_id;
+	u8 icflags;
+	u8 reserved[2];
+} __packed;
+
+struct icmsg_negotiate {
+	u16 icframe_vercnt;
+	u16 icmsg_vercnt;
+	u32 reserved;
+	struct ic_version icversion_data[1]; /* any size array */
+} __packed;
+
+struct shutdown_msg_data {
+	u32 reason_code;
+	u32 timeout_seconds;
+	u32 flags;
+	u8  display_message[2048];
+} __packed;
+
+struct heartbeat_msg_data {
+	u64 seq_num;
+	u32 reserved[8];
+} __packed;
+
+/* Time Sync IC defs */
+#define ICTIMESYNCFLAG_PROBE	0
+#define ICTIMESYNCFLAG_SYNC	1
+#define ICTIMESYNCFLAG_SAMPLE	2
+
+#ifdef __x86_64__
+#define WLTIMEDELTA	116444736000000000L	/* in 100ns unit */
+#else
+#define WLTIMEDELTA	116444736000000000LL
+#endif
+
+struct ictimesync_data {
+	u64 parenttime;
+	u64 childtime;
+	u64 roundtriptime;
+	u8 flags;
+} __packed;
+
+struct hyperv_service_callback {
+	u8 msg_type;
+	char *log_msg;
+	uuid_le data;
+	struct vmbus_channel *channel;
+	void (*callback) (void *context);
+};
+
+extern void vmbus_prep_negotiate_resp(struct icmsg_hdr *,
+				      struct icmsg_negotiate *, u8 *);
+
+int hv_kvp_init(struct hv_util_service *);
+void hv_kvp_deinit(void);
+void hv_kvp_onchannelcallback(void *);
+
+#endif /* __KERNEL__ */
+#endif /* _HYPERV_H */
diff --git a/include/linux/hysdn_if.h b/include/linux/hysdn_if.h
new file mode 100644
index 00000000..00236ae3
--- /dev/null
+++ b/include/linux/hysdn_if.h
@@ -0,0 +1,33 @@
+/* $Id: hysdn_if.h,v 1.1.8.3 2001/09/23 22:25:05 kai Exp $
+ *
+ * Linux driver for HYSDN cards
+ * ioctl definitions shared by hynetmgr and driver.
+ *
+ * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
+ * Copyright 1999 by Werner Cornelius (werner@titro.de)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+/****************/
+/* error values */
+/****************/
+#define ERR_NONE             0 /* no error occurred */
+#define ERR_ALREADY_BOOT  1000 /* we are already booting */
+#define EPOF_BAD_MAGIC    1001 /* bad magic in POF header */
+#define ERR_BOARD_DPRAM   1002 /* board DPRAM failed */
+#define EPOF_INTERNAL     1003 /* internal POF handler error */
+#define EPOF_BAD_IMG_SIZE 1004 /* POF boot image size invalid */
+#define ERR_BOOTIMG_FAIL  1005 /* 1. stage boot image did not start */
+#define ERR_BOOTSEQ_FAIL  1006 /* 2. stage boot seq handshake timeout */
+#define ERR_POF_TIMEOUT   1007 /* timeout waiting for card pof ready */
+#define ERR_NOT_BOOTED    1008 /* operation only allowed when booted */
+#define ERR_CONF_LONG     1009 /* conf line is too long */ 
+#define ERR_INV_CHAN      1010 /* invalid channel number */ 
+#define ERR_ASYNC_TIME    1011 /* timeout sending async data */ 
+
+
+
+
diff --git a/include/linux/i2c-algo-bit.h b/include/linux/i2c-algo-bit.h
new file mode 100644
index 00000000..63904ba6
--- /dev/null
+++ b/include/linux/i2c-algo-bit.h
@@ -0,0 +1,55 @@
+/* ------------------------------------------------------------------------- */
+/* i2c-algo-bit.h i2c driver algorithms for bit-shift adapters               */
+/* ------------------------------------------------------------------------- */
+/*   Copyright (C) 1995-99 Simon G. Vogl
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+    MA 02110-1301 USA.							     */
+/* ------------------------------------------------------------------------- */
+
+/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
+   Frodo Looijaard <frodol@dds.nl> */
+
+#ifndef _LINUX_I2C_ALGO_BIT_H
+#define _LINUX_I2C_ALGO_BIT_H
+
+/* --- Defines for bit-adapters ---------------------------------------	*/
+/*
+ * This struct contains the hw-dependent functions of bit-style adapters to
+ * manipulate the line states, and to init any hw-specific features. This is
+ * only used if you have more than one hw-type of adapter running.
+ */
+struct i2c_algo_bit_data {
+	void *data;		/* private data for lowlevel routines */
+	void (*setsda) (void *data, int state);
+	void (*setscl) (void *data, int state);
+	int  (*getsda) (void *data);
+	int  (*getscl) (void *data);
+	int  (*pre_xfer)  (struct i2c_adapter *);
+	void (*post_xfer) (struct i2c_adapter *);
+
+	/* local settings */
+	int udelay;		/* half clock cycle time in us,
+				   minimum 2 us for fast-mode I2C,
+				   minimum 5 us for standard-mode I2C and SMBus,
+				   maximum 50 us for SMBus */
+	int timeout;		/* in jiffies */
+};
+
+int i2c_bit_add_bus(struct i2c_adapter *);
+int i2c_bit_add_numbered_bus(struct i2c_adapter *);
+extern const struct i2c_algorithm i2c_bit_algo;
+
+#endif /* _LINUX_I2C_ALGO_BIT_H */
diff --git a/include/linux/i2c-algo-pca.h b/include/linux/i2c-algo-pca.h
new file mode 100644
index 00000000..1364d62e
--- /dev/null
+++ b/include/linux/i2c-algo-pca.h
@@ -0,0 +1,70 @@
+#ifndef _LINUX_I2C_ALGO_PCA_H
+#define _LINUX_I2C_ALGO_PCA_H
+
+/* Chips known to the pca algo */
+#define I2C_PCA_CHIP_9564	0x00
+#define I2C_PCA_CHIP_9665	0x01
+
+/* Internal period for PCA9665 oscilator */
+#define I2C_PCA_OSC_PER		3 /* e10-8s */
+
+/* Clock speeds for the bus for PCA9564*/
+#define I2C_PCA_CON_330kHz	0x00
+#define I2C_PCA_CON_288kHz	0x01
+#define I2C_PCA_CON_217kHz	0x02
+#define I2C_PCA_CON_146kHz	0x03
+#define I2C_PCA_CON_88kHz	0x04
+#define I2C_PCA_CON_59kHz	0x05
+#define I2C_PCA_CON_44kHz	0x06
+#define I2C_PCA_CON_36kHz	0x07
+
+/* PCA9564 registers */
+#define I2C_PCA_STA		0x00 /* STATUS  Read Only  */
+#define I2C_PCA_TO		0x00 /* TIMEOUT Write Only */
+#define I2C_PCA_DAT		0x01 /* DATA    Read/Write */
+#define I2C_PCA_ADR		0x02 /* OWN ADR Read/Write */
+#define I2C_PCA_CON		0x03 /* CONTROL Read/Write */
+
+/* PCA9665 registers */
+#define I2C_PCA_INDPTR          0x00 /* INDIRECT Pointer Write Only */
+#define I2C_PCA_IND             0x02 /* INDIRECT Read/Write */
+
+/* PCA9665 indirect registers */
+#define I2C_PCA_ICOUNT          0x00 /* Byte Count for buffered mode */
+#define I2C_PCA_IADR            0x01 /* OWN ADR */
+#define I2C_PCA_ISCLL           0x02 /* SCL LOW period */
+#define I2C_PCA_ISCLH           0x03 /* SCL HIGH period */
+#define I2C_PCA_ITO             0x04 /* TIMEOUT */
+#define I2C_PCA_IPRESET         0x05 /* Parallel bus reset */
+#define I2C_PCA_IMODE           0x06 /* I2C Bus mode */
+
+/* PCA9665 I2C bus mode */
+#define I2C_PCA_MODE_STD        0x00 /* Standard mode */
+#define I2C_PCA_MODE_FAST       0x01 /* Fast mode */
+#define I2C_PCA_MODE_FASTP      0x02 /* Fast Plus mode */
+#define I2C_PCA_MODE_TURBO      0x03 /* Turbo mode */
+
+
+#define I2C_PCA_CON_AA		0x80 /* Assert Acknowledge */
+#define I2C_PCA_CON_ENSIO	0x40 /* Enable */
+#define I2C_PCA_CON_STA		0x20 /* Start */
+#define I2C_PCA_CON_STO		0x10 /* Stop */
+#define I2C_PCA_CON_SI		0x08 /* Serial Interrupt */
+#define I2C_PCA_CON_CR		0x07 /* Clock Rate (MASK) */
+
+struct i2c_algo_pca_data {
+	void 				*data;	/* private low level data */
+	void (*write_byte)		(void *data, int reg, int val);
+	int  (*read_byte)		(void *data, int reg);
+	int  (*wait_for_completion)	(void *data);
+	void (*reset_chip)		(void *data);
+	/* For PCA9564, use one of the predefined frequencies:
+	 * 330000, 288000, 217000, 146000, 88000, 59000, 44000, 36000
+	 * For PCA9665, use the frequency you want here. */
+	unsigned int			i2c_clock;
+};
+
+int i2c_pca_add_bus(struct i2c_adapter *);
+int i2c_pca_add_numbered_bus(struct i2c_adapter *);
+
+#endif /* _LINUX_I2C_ALGO_PCA_H */
diff --git a/include/linux/i2c-algo-pcf.h b/include/linux/i2c-algo-pcf.h
new file mode 100644
index 00000000..538e8f41
--- /dev/null
+++ b/include/linux/i2c-algo-pcf.h
@@ -0,0 +1,49 @@
+/* ------------------------------------------------------------------------- */
+/* adap-pcf.h i2c driver algorithms for PCF8584 adapters                     */
+/* ------------------------------------------------------------------------- */
+/*   Copyright (C) 1995-97 Simon G. Vogl
+                   1998-99 Hans Berglund
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+    MA 02110-1301 USA.							     */
+/* ------------------------------------------------------------------------- */
+
+/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
+   Frodo Looijaard <frodol@dds.nl> */
+
+#ifndef _LINUX_I2C_ALGO_PCF_H
+#define _LINUX_I2C_ALGO_PCF_H
+
+struct i2c_algo_pcf_data {
+	void *data;		/* private data for lolevel routines	*/
+	void (*setpcf) (void *data, int ctl, int val);
+	int  (*getpcf) (void *data, int ctl);
+	int  (*getown) (void *data);
+	int  (*getclock) (void *data);
+	void (*waitforpin) (void *data);
+
+	void (*xfer_begin) (void *data);
+	void (*xfer_end) (void *data);
+
+	/* Multi-master lost arbitration back-off delay (msecs)
+	 * This should be set by the bus adapter or knowledgable client
+	 * if bus is multi-mastered, else zero
+	 */
+	unsigned long lab_mdelay;
+};
+
+int i2c_pcf_add_bus(struct i2c_adapter *);
+
+#endif /* _LINUX_I2C_ALGO_PCF_H */
diff --git a/include/linux/i2c-dev.h b/include/linux/i2c-dev.h
new file mode 100644
index 00000000..8a7406b2
--- /dev/null
+++ b/include/linux/i2c-dev.h
@@ -0,0 +1,75 @@
+/*
+    i2c-dev.h - i2c-bus driver, char device interface
+
+    Copyright (C) 1995-97 Simon G. Vogl
+    Copyright (C) 1998-99 Frodo Looijaard <frodol@dds.nl>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+    MA 02110-1301 USA.
+*/
+
+#ifndef _LINUX_I2C_DEV_H
+#define _LINUX_I2C_DEV_H
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+/* /dev/i2c-X ioctl commands.  The ioctl's parameter is always an
+ * unsigned long, except for:
+ *	- I2C_FUNCS, takes pointer to an unsigned long
+ *	- I2C_RDWR, takes pointer to struct i2c_rdwr_ioctl_data
+ *	- I2C_SMBUS, takes pointer to struct i2c_smbus_ioctl_data
+ */
+#define I2C_RETRIES	0x0701	/* number of times a device address should
+				   be polled when not acknowledging */
+#define I2C_TIMEOUT	0x0702	/* set timeout in units of 10 ms */
+
+/* NOTE: Slave address is 7 or 10 bits, but 10-bit addresses
+ * are NOT supported! (due to code brokenness)
+ */
+#define I2C_SLAVE	0x0703	/* Use this slave address */
+#define I2C_SLAVE_FORCE	0x0706	/* Use this slave address, even if it
+				   is already in use by a driver! */
+#define I2C_TENBIT	0x0704	/* 0 for 7 bit addrs, != 0 for 10 bit */
+
+#define I2C_FUNCS	0x0705	/* Get the adapter functionality mask */
+
+#define I2C_RDWR	0x0707	/* Combined R/W transfer (one STOP only) */
+
+#define I2C_PEC		0x0708	/* != 0 to use PEC with SMBus */
+#define I2C_SMBUS	0x0720	/* SMBus transfer */
+
+
+/* This is the structure as used in the I2C_SMBUS ioctl call */
+struct i2c_smbus_ioctl_data {
+	__u8 read_write;
+	__u8 command;
+	__u32 size;
+	union i2c_smbus_data __user *data;
+};
+
+/* This is the structure as used in the I2C_RDWR ioctl call */
+struct i2c_rdwr_ioctl_data {
+	struct i2c_msg __user *msgs;	/* pointers to i2c_msgs */
+	__u32 nmsgs;			/* number of i2c_msgs */
+};
+
+#define  I2C_RDRW_IOCTL_MAX_MSGS	42
+
+#ifdef __KERNEL__
+#define I2C_MAJOR	89		/* Device major number		*/
+#endif
+
+#endif /* _LINUX_I2C_DEV_H */
diff --git a/include/linux/i2c-gpio.h b/include/linux/i2c-gpio.h
new file mode 100644
index 00000000..c1bcb1f1
--- /dev/null
+++ b/include/linux/i2c-gpio.h
@@ -0,0 +1,38 @@
+/*
+ * i2c-gpio interface to platform code
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _LINUX_I2C_GPIO_H
+#define _LINUX_I2C_GPIO_H
+
+/**
+ * struct i2c_gpio_platform_data - Platform-dependent data for i2c-gpio
+ * @sda_pin: GPIO pin ID to use for SDA
+ * @scl_pin: GPIO pin ID to use for SCL
+ * @udelay: signal toggle delay. SCL frequency is (500 / udelay) kHz
+ * @timeout: clock stretching timeout in jiffies. If the slave keeps
+ *	SCL low for longer than this, the transfer will time out.
+ * @sda_is_open_drain: SDA is configured as open drain, i.e. the pin
+ *	isn't actively driven high when setting the output value high.
+ *	gpio_get_value() must return the actual pin state even if the
+ *	pin is configured as an output.
+ * @scl_is_open_drain: SCL is set up as open drain. Same requirements
+ *	as for sda_is_open_drain apply.
+ * @scl_is_output_only: SCL output drivers cannot be turned off.
+ */
+struct i2c_gpio_platform_data {
+	unsigned int	sda_pin;
+	unsigned int	scl_pin;
+	int		udelay;
+	int		timeout;
+	unsigned int	sda_is_open_drain:1;
+	unsigned int	scl_is_open_drain:1;
+	unsigned int	scl_is_output_only:1;
+};
+
+#endif /* _LINUX_I2C_GPIO_H */
diff --git a/include/linux/i2c-mux.h b/include/linux/i2c-mux.h
new file mode 100644
index 00000000..747f0cde
--- /dev/null
+++ b/include/linux/i2c-mux.h
@@ -0,0 +1,47 @@
+/*
+ *
+ * i2c-mux.h - functions for the i2c-bus mux support
+ *
+ * Copyright (c) 2008-2009 Rodolfo Giometti <giometti@linux.it>
+ * Copyright (c) 2008-2009 Eurotech S.p.A. <info@eurotech.it>
+ * Michael Lawnick <michael.lawnick.ext@nsn.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA.
+ */
+
+#ifndef _LINUX_I2C_MUX_H
+#define _LINUX_I2C_MUX_H
+
+#ifdef __KERNEL__
+
+/*
+ * Called to create a i2c bus on a multiplexed bus segment.
+ * The mux_dev and chan_id parameters are passed to the select
+ * and deselect callback functions to perform hardware-specific
+ * mux control.
+ */
+struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
+				void *mux_dev, u32 force_nr, u32 chan_id,
+				int (*select) (struct i2c_adapter *,
+					       void *mux_dev, u32 chan_id),
+				int (*deselect) (struct i2c_adapter *,
+						 void *mux_dev, u32 chan_id));
+
+int i2c_del_mux_adapter(struct i2c_adapter *adap);
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_I2C_MUX_H */
diff --git a/include/linux/i2c-ocores.h b/include/linux/i2c-ocores.h
new file mode 100644
index 00000000..4d5e57ff
--- /dev/null
+++ b/include/linux/i2c-ocores.h
@@ -0,0 +1,21 @@
+/*
+ * i2c-ocores.h - definitions for the i2c-ocores interface
+ *
+ * Peter Korsgaard <jacmet@sunsite.dk>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef _LINUX_I2C_OCORES_H
+#define _LINUX_I2C_OCORES_H
+
+struct ocores_i2c_platform_data {
+	u32 regstep;   /* distance between registers */
+	u32 clock_khz; /* input clock in kHz */
+	u8 num_devices; /* number of devices in the devices list */
+	struct i2c_board_info const *devices; /* devices connected to the bus */
+};
+
+#endif /* _LINUX_I2C_OCORES_H */
diff --git a/include/linux/i2c-omap.h b/include/linux/i2c-omap.h
new file mode 100644
index 00000000..92a0dc75
--- /dev/null
+++ b/include/linux/i2c-omap.h
@@ -0,0 +1,40 @@
+#ifndef __I2C_OMAP_H__
+#define __I2C_OMAP_H__
+
+#include <linux/platform_device.h>
+
+/*
+ * Version 2 of the I2C peripheral unit has a different register
+ * layout and extra registers.  The ID register in the V2 peripheral
+ * unit on the OMAP4430 reports the same ID as the V1 peripheral
+ * unit on the OMAP3530, so we must inform the driver which IP
+ * version we know it is running on from platform / cpu-specific
+ * code using these constants in the hwmod class definition.
+ */
+
+#define OMAP_I2C_IP_VERSION_1 1
+#define OMAP_I2C_IP_VERSION_2 2
+
+/* struct omap_i2c_bus_platform_data .flags meanings */
+
+#define OMAP_I2C_FLAG_NO_FIFO			BIT(0)
+#define OMAP_I2C_FLAG_SIMPLE_CLOCK		BIT(1)
+#define OMAP_I2C_FLAG_16BIT_DATA_REG		BIT(2)
+#define OMAP_I2C_FLAG_RESET_REGS_POSTIDLE	BIT(3)
+#define OMAP_I2C_FLAG_APPLY_ERRATA_I207	BIT(4)
+#define OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK	BIT(5)
+#define OMAP_I2C_FLAG_FORCE_19200_INT_CLK	BIT(6)
+/* how the CPU address bus must be translated for I2C unit access */
+#define OMAP_I2C_FLAG_BUS_SHIFT_NONE 0
+#define OMAP_I2C_FLAG_BUS_SHIFT_1		BIT(7)
+#define OMAP_I2C_FLAG_BUS_SHIFT_2		BIT(8)
+#define OMAP_I2C_FLAG_BUS_SHIFT__SHIFT 7
+
+struct omap_i2c_bus_platform_data {
+	u32		clkrate;
+	u32		rev;
+	u32		flags;
+	void		(*set_mpu_wkup_lat)(struct device *dev, long set);
+};
+
+#endif
diff --git a/include/linux/i2c-pca-platform.h b/include/linux/i2c-pca-platform.h
new file mode 100644
index 00000000..aba33759
--- /dev/null
+++ b/include/linux/i2c-pca-platform.h
@@ -0,0 +1,12 @@
+#ifndef I2C_PCA9564_PLATFORM_H
+#define I2C_PCA9564_PLATFORM_H
+
+struct i2c_pca9564_pf_platform_data {
+	int gpio;		/* pin to reset chip. driver will work when
+				 * not supplied (negative value), but it
+				 * cannot exit some error conditions then */
+	int i2c_clock_speed;	/* values are defined in linux/i2c-algo-pca.h */
+	int timeout;		/* timeout in jiffies */
+};
+
+#endif /* I2C_PCA9564_PLATFORM_H */
diff --git a/include/linux/i2c-pnx.h b/include/linux/i2c-pnx.h
new file mode 100644
index 00000000..a87124d4
--- /dev/null
+++ b/include/linux/i2c-pnx.h
@@ -0,0 +1,42 @@
+/*
+ * Header file for I2C support on PNX010x/4008.
+ *
+ * Author: Dennis Kovalev <dkovalev@ru.mvista.com>
+ *
+ * 2004-2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __I2C_PNX_H__
+#define __I2C_PNX_H__
+
+struct platform_device;
+struct clk;
+
+struct i2c_pnx_mif {
+	int			ret;		/* Return value */
+	int			mode;		/* Interface mode */
+	struct completion	complete;	/* I/O completion */
+	struct timer_list	timer;		/* Timeout */
+	u8 *			buf;		/* Data buffer */
+	int			len;		/* Length of data buffer */
+};
+
+struct i2c_pnx_algo_data {
+	void __iomem		*ioaddr;
+	struct i2c_pnx_mif	mif;
+	int			last;
+	struct clk		*clk;
+	struct i2c_pnx_data	*i2c_pnx;
+	struct i2c_adapter	adapter;
+};
+
+struct i2c_pnx_data {
+	const char *name;
+	u32 base;
+	int irq;
+};
+
+#endif /* __I2C_PNX_H__ */
diff --git a/include/linux/i2c-pxa.h b/include/linux/i2c-pxa.h
new file mode 100644
index 00000000..41dcdfe7
--- /dev/null
+++ b/include/linux/i2c-pxa.h
@@ -0,0 +1,17 @@
+#ifndef _LINUX_I2C_ALGO_PXA_H
+#define _LINUX_I2C_ALGO_PXA_H
+
+typedef enum i2c_slave_event_e {
+	I2C_SLAVE_EVENT_START_READ,
+	I2C_SLAVE_EVENT_START_WRITE,
+	I2C_SLAVE_EVENT_STOP
+} i2c_slave_event_t;
+
+struct i2c_slave_client {
+	void *data;
+	void (*event)(void *ptr, i2c_slave_event_t event);
+	int  (*read) (void *ptr);
+	void (*write)(void *ptr, unsigned int val);
+};
+
+#endif /* _LINUX_I2C_ALGO_PXA_H */
diff --git a/include/linux/i2c-smbus.h b/include/linux/i2c-smbus.h
new file mode 100644
index 00000000..017fb40f
--- /dev/null
+++ b/include/linux/i2c-smbus.h
@@ -0,0 +1,51 @@
+/*
+ * i2c-smbus.h - SMBus extensions to the I2C protocol
+ *
+ * Copyright (C) 2010 Jean Delvare <khali@linux-fr.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA.
+ */
+
+#ifndef _LINUX_I2C_SMBUS_H
+#define _LINUX_I2C_SMBUS_H
+
+#include <linux/i2c.h>
+
+
+/**
+ * i2c_smbus_alert_setup - platform data for the smbus_alert i2c client
+ * @alert_edge_triggered: whether the alert interrupt is edge (1) or level (0)
+ *		triggered
+ * @irq: IRQ number, if the smbus_alert driver should take care of interrupt
+ *		handling
+ *
+ * If irq is not specified, the smbus_alert driver doesn't take care of
+ * interrupt handling. In that case it is up to the I2C bus driver to either
+ * handle the interrupts or to poll for alerts.
+ *
+ * If irq is specified then it it crucial that alert_edge_triggered is
+ * properly set.
+ */
+struct i2c_smbus_alert_setup {
+	unsigned int		alert_edge_triggered:1;
+	int			irq;
+};
+
+struct i2c_client *i2c_setup_smbus_alert(struct i2c_adapter *adapter,
+					 struct i2c_smbus_alert_setup *setup);
+int i2c_handle_smbus_alert(struct i2c_client *ara);
+
+#endif /* _LINUX_I2C_SMBUS_H */
diff --git a/include/linux/i2c-tegra.h b/include/linux/i2c-tegra.h
new file mode 100644
index 00000000..9c85da49
--- /dev/null
+++ b/include/linux/i2c-tegra.h
@@ -0,0 +1,25 @@
+/*
+ * drivers/i2c/busses/i2c-tegra.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ * Author: Colin Cross <ccross@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _LINUX_I2C_TEGRA_H
+#define _LINUX_I2C_TEGRA_H
+
+struct tegra_i2c_platform_data {
+	unsigned long bus_clk_rate;
+};
+
+#endif /* _LINUX_I2C_TEGRA_H */
diff --git a/include/linux/i2c-xiic.h b/include/linux/i2c-xiic.h
new file mode 100644
index 00000000..4f9f2256
--- /dev/null
+++ b/include/linux/i2c-xiic.h
@@ -0,0 +1,43 @@
+/*
+ * i2c-xiic.h
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * Xilinx IIC
+ */
+
+#ifndef _LINUX_I2C_XIIC_H
+#define _LINUX_I2C_XIIC_H
+
+/**
+ * struct xiic_i2c_platform_data - Platform data of the Xilinx I2C driver
+ * @num_devices:	Number of devices that shall be added when the driver
+ *			is probed.
+ * @devices:		The actuall devices to add.
+ *
+ * This purpose of this platform data struct is to be able to provide a number
+ * of devices that should be added to the I2C bus. The reason is that sometimes
+ * the I2C board info is not enough, a new PCI board can for instance be
+ * plugged into a standard PC, and the bus number might be unknown at
+ * early init time.
+ */
+struct xiic_i2c_platform_data {
+	u8				num_devices;
+	struct i2c_board_info const	*devices;
+};
+
+#endif /* _LINUX_I2C_XIIC_H */
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
new file mode 100644
index 00000000..195d8b3d
--- /dev/null
+++ b/include/linux/i2c.h
@@ -0,0 +1,619 @@
+/* ------------------------------------------------------------------------- */
+/*									     */
+/* i2c.h - definitions for the i2c-bus interface			     */
+/*									     */
+/* ------------------------------------------------------------------------- */
+/*   Copyright (C) 1995-2000 Simon G. Vogl
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+    MA 02110-1301 USA.							     */
+/* ------------------------------------------------------------------------- */
+
+/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
+   Frodo Looijaard <frodol@dds.nl> */
+
+#ifndef _LINUX_I2C_H
+#define _LINUX_I2C_H
+
+#include <linux/types.h>
+#ifdef __KERNEL__
+#include <linux/mod_devicetable.h>
+#include <linux/device.h>	/* for struct device */
+#include <linux/sched.h>	/* for completion */
+#include <linux/mutex.h>
+#include <linux/of.h>		/* for struct device_node */
+#include <linux/swab.h>		/* for swab16 */
+
+extern struct bus_type i2c_bus_type;
+extern struct device_type i2c_adapter_type;
+
+/* --- General options ------------------------------------------------	*/
+
+struct i2c_msg;
+struct i2c_algorithm;
+struct i2c_adapter;
+struct i2c_client;
+struct i2c_driver;
+union i2c_smbus_data;
+struct i2c_board_info;
+
+struct module;
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+/*
+ * The master routines are the ones normally used to transmit data to devices
+ * on a bus (or read from them). Apart from two basic transfer functions to
+ * transmit one message at a time, a more complex version can be used to
+ * transmit an arbitrary number of messages without interruption.
+ * @count must be be less than 64k since msg.len is u16.
+ */
+extern int i2c_master_send(const struct i2c_client *client, const char *buf,
+			   int count);
+extern int i2c_master_recv(const struct i2c_client *client, char *buf,
+			   int count);
+
+/* Transfer num messages.
+ */
+extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+			int num);
+
+/* This is the very generalized SMBus access routine. You probably do not
+   want to use this, though; one of the functions below may be much easier,
+   and probably just as fast.
+   Note that we use i2c_adapter here, because you do not need a specific
+   smbus adapter to call this function. */
+extern s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
+			  unsigned short flags, char read_write, u8 command,
+			  int size, union i2c_smbus_data *data);
+
+/* Now follow the 'nice' access routines. These also document the calling
+   conventions of i2c_smbus_xfer. */
+
+extern s32 i2c_smbus_read_byte(const struct i2c_client *client);
+extern s32 i2c_smbus_write_byte(const struct i2c_client *client, u8 value);
+extern s32 i2c_smbus_read_byte_data(const struct i2c_client *client,
+				    u8 command);
+extern s32 i2c_smbus_write_byte_data(const struct i2c_client *client,
+				     u8 command, u8 value);
+extern s32 i2c_smbus_read_word_data(const struct i2c_client *client,
+				    u8 command);
+extern s32 i2c_smbus_write_word_data(const struct i2c_client *client,
+				     u8 command, u16 value);
+
+static inline s32
+i2c_smbus_read_word_swapped(const struct i2c_client *client, u8 command)
+{
+	s32 value = i2c_smbus_read_word_data(client, command);
+
+	return (value < 0) ? value : swab16(value);
+}
+
+static inline s32
+i2c_smbus_write_word_swapped(const struct i2c_client *client,
+			     u8 command, u16 value)
+{
+	return i2c_smbus_write_word_data(client, command, swab16(value));
+}
+
+/* Returns the number of read bytes */
+extern s32 i2c_smbus_read_block_data(const struct i2c_client *client,
+				     u8 command, u8 *values);
+extern s32 i2c_smbus_write_block_data(const struct i2c_client *client,
+				      u8 command, u8 length, const u8 *values);
+/* Returns the number of read bytes */
+extern s32 i2c_smbus_read_i2c_block_data(const struct i2c_client *client,
+					 u8 command, u8 length, u8 *values);
+extern s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client,
+					  u8 command, u8 length,
+					  const u8 *values);
+#endif /* I2C */
+
+/**
+ * struct i2c_driver - represent an I2C device driver
+ * @class: What kind of i2c device we instantiate (for detect)
+ * @attach_adapter: Callback for bus addition (deprecated)
+ * @detach_adapter: Callback for bus removal (deprecated)
+ * @probe: Callback for device binding
+ * @remove: Callback for device unbinding
+ * @shutdown: Callback for device shutdown
+ * @suspend: Callback for device suspend
+ * @resume: Callback for device resume
+ * @alert: Alert callback, for example for the SMBus alert protocol
+ * @command: Callback for bus-wide signaling (optional)
+ * @driver: Device driver model driver
+ * @id_table: List of I2C devices supported by this driver
+ * @detect: Callback for device detection
+ * @address_list: The I2C addresses to probe (for detect)
+ * @clients: List of detected clients we created (for i2c-core use only)
+ *
+ * The driver.owner field should be set to the module owner of this driver.
+ * The driver.name field should be set to the name of this driver.
+ *
+ * For automatic device detection, both @detect and @address_data must
+ * be defined. @class should also be set, otherwise only devices forced
+ * with module parameters will be created. The detect function must
+ * fill at least the name field of the i2c_board_info structure it is
+ * handed upon successful detection, and possibly also the flags field.
+ *
+ * If @detect is missing, the driver will still work fine for enumerated
+ * devices. Detected devices simply won't be supported. This is expected
+ * for the many I2C/SMBus devices which can't be detected reliably, and
+ * the ones which can always be enumerated in practice.
+ *
+ * The i2c_client structure which is handed to the @detect callback is
+ * not a real i2c_client. It is initialized just enough so that you can
+ * call i2c_smbus_read_byte_data and friends on it. Don't do anything
+ * else with it. In particular, calling dev_dbg and friends on it is
+ * not allowed.
+ */
+struct i2c_driver {
+	unsigned int class;
+
+	/* Notifies the driver that a new bus has appeared or is about to be
+	 * removed. You should avoid using this, it will be removed in a
+	 * near future.
+	 */
+	int (*attach_adapter)(struct i2c_adapter *) __deprecated;
+	int (*detach_adapter)(struct i2c_adapter *) __deprecated;
+
+	/* Standard driver model interfaces */
+	int (*probe)(struct i2c_client *, const struct i2c_device_id *);
+	int (*remove)(struct i2c_client *);
+
+	/* driver model interfaces that don't relate to enumeration  */
+	void (*shutdown)(struct i2c_client *);
+	int (*suspend)(struct i2c_client *, pm_message_t mesg);
+	int (*resume)(struct i2c_client *);
+
+	/* Alert callback, for example for the SMBus alert protocol.
+	 * The format and meaning of the data value depends on the protocol.
+	 * For the SMBus alert protocol, there is a single bit of data passed
+	 * as the alert response's low bit ("event flag").
+	 */
+	void (*alert)(struct i2c_client *, unsigned int data);
+
+	/* a ioctl like command that can be used to perform specific functions
+	 * with the device.
+	 */
+	int (*command)(struct i2c_client *client, unsigned int cmd, void *arg);
+
+	struct device_driver driver;
+	const struct i2c_device_id *id_table;
+
+	/* Device detection callback for automatic device creation */
+	int (*detect)(struct i2c_client *, struct i2c_board_info *);
+	const unsigned short *address_list;
+	struct list_head clients;
+};
+#define to_i2c_driver(d) container_of(d, struct i2c_driver, driver)
+
+/**
+ * struct i2c_client - represent an I2C slave device
+ * @flags: I2C_CLIENT_TEN indicates the device uses a ten bit chip address;
+ *	I2C_CLIENT_PEC indicates it uses SMBus Packet Error Checking
+ * @addr: Address used on the I2C bus connected to the parent adapter.
+ * @name: Indicates the type of the device, usually a chip name that's
+ *	generic enough to hide second-sourcing and compatible revisions.
+ * @adapter: manages the bus segment hosting this I2C device
+ * @driver: device's driver, hence pointer to access routines
+ * @dev: Driver model device node for the slave.
+ * @irq: indicates the IRQ generated by this device (if any)
+ * @detected: member of an i2c_driver.clients list or i2c-core's
+ *	userspace_devices list
+ *
+ * An i2c_client identifies a single device (i.e. chip) connected to an
+ * i2c bus. The behaviour exposed to Linux is defined by the driver
+ * managing the device.
+ */
+struct i2c_client {
+	unsigned short flags;		/* div., see below		*/
+	unsigned short addr;		/* chip address - NOTE: 7bit	*/
+					/* addresses are stored in the	*/
+					/* _LOWER_ 7 bits		*/
+	char name[I2C_NAME_SIZE];
+	struct i2c_adapter *adapter;	/* the adapter we sit on	*/
+	struct i2c_driver *driver;	/* and our access routines	*/
+	struct device dev;		/* the device structure		*/
+	int irq;			/* irq issued by device		*/
+	struct list_head detected;
+};
+#define to_i2c_client(d) container_of(d, struct i2c_client, dev)
+
+extern struct i2c_client *i2c_verify_client(struct device *dev);
+
+static inline struct i2c_client *kobj_to_i2c_client(struct kobject *kobj)
+{
+	struct device * const dev = container_of(kobj, struct device, kobj);
+	return to_i2c_client(dev);
+}
+
+static inline void *i2c_get_clientdata(const struct i2c_client *dev)
+{
+	return dev_get_drvdata(&dev->dev);
+}
+
+static inline void i2c_set_clientdata(struct i2c_client *dev, void *data)
+{
+	dev_set_drvdata(&dev->dev, data);
+}
+
+/**
+ * struct i2c_board_info - template for device creation
+ * @type: chip type, to initialize i2c_client.name
+ * @flags: to initialize i2c_client.flags
+ * @addr: stored in i2c_client.addr
+ * @platform_data: stored in i2c_client.dev.platform_data
+ * @archdata: copied into i2c_client.dev.archdata
+ * @of_node: pointer to OpenFirmware device node
+ * @irq: stored in i2c_client.irq
+ *
+ * I2C doesn't actually support hardware probing, although controllers and
+ * devices may be able to use I2C_SMBUS_QUICK to tell whether or not there's
+ * a device at a given address.  Drivers commonly need more information than
+ * that, such as chip type, configuration, associated IRQ, and so on.
+ *
+ * i2c_board_info is used to build tables of information listing I2C devices
+ * that are present.  This information is used to grow the driver model tree.
+ * For mainboards this is done statically using i2c_register_board_info();
+ * bus numbers identify adapters that aren't yet available.  For add-on boards,
+ * i2c_new_device() does this dynamically with the adapter already known.
+ */
+struct i2c_board_info {
+	char		type[I2C_NAME_SIZE];
+	unsigned short	flags;
+	unsigned short	addr;
+	void		*platform_data;
+	struct dev_archdata	*archdata;
+	struct device_node *of_node;
+	int		irq;
+};
+
+/**
+ * I2C_BOARD_INFO - macro used to list an i2c device and its address
+ * @dev_type: identifies the device type
+ * @dev_addr: the device's address on the bus.
+ *
+ * This macro initializes essential fields of a struct i2c_board_info,
+ * declaring what has been provided on a particular board.  Optional
+ * fields (such as associated irq, or device-specific platform_data)
+ * are provided using conventional syntax.
+ */
+#define I2C_BOARD_INFO(dev_type, dev_addr) \
+	.type = dev_type, .addr = (dev_addr)
+
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+/* Add-on boards should register/unregister their devices; e.g. a board
+ * with integrated I2C, a config eeprom, sensors, and a codec that's
+ * used in conjunction with the primary hardware.
+ */
+extern struct i2c_client *
+i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info);
+
+/* If you don't know the exact address of an I2C device, use this variant
+ * instead, which can probe for device presence in a list of possible
+ * addresses. The "probe" callback function is optional. If it is provided,
+ * it must return 1 on successful probe, 0 otherwise. If it is not provided,
+ * a default probing method is used.
+ */
+extern struct i2c_client *
+i2c_new_probed_device(struct i2c_adapter *adap,
+		      struct i2c_board_info *info,
+		      unsigned short const *addr_list,
+		      int (*probe)(struct i2c_adapter *, unsigned short addr));
+
+/* Common custom probe functions */
+extern int i2c_probe_func_quick_read(struct i2c_adapter *, unsigned short addr);
+
+/* For devices that use several addresses, use i2c_new_dummy() to make
+ * client handles for the extra addresses.
+ */
+extern struct i2c_client *
+i2c_new_dummy(struct i2c_adapter *adap, u16 address);
+
+extern void i2c_unregister_device(struct i2c_client *);
+#endif /* I2C */
+
+/* Mainboard arch_initcall() code should register all its I2C devices.
+ * This is done at arch_initcall time, before declaring any i2c adapters.
+ * Modules for add-on boards must use other calls.
+ */
+#ifdef CONFIG_I2C_BOARDINFO
+extern int
+i2c_register_board_info(int busnum, struct i2c_board_info const *info,
+			unsigned n);
+#else
+static inline int
+i2c_register_board_info(int busnum, struct i2c_board_info const *info,
+			unsigned n)
+{
+	return 0;
+}
+#endif /* I2C_BOARDINFO */
+
+/*
+ * The following structs are for those who like to implement new bus drivers:
+ * i2c_algorithm is the interface to a class of hardware solutions which can
+ * be addressed using the same bus algorithms - i.e. bit-banging or the PCF8584
+ * to name two of the most common.
+ */
+struct i2c_algorithm {
+	/* If an adapter algorithm can't do I2C-level access, set master_xfer
+	   to NULL. If an adapter algorithm can do SMBus access, set
+	   smbus_xfer. If set to NULL, the SMBus protocol is simulated
+	   using common I2C messages */
+	/* master_xfer should return the number of messages successfully
+	   processed, or a negative value on error */
+	int (*master_xfer)(struct i2c_adapter *adap, struct i2c_msg *msgs,
+			   int num);
+	int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr,
+			   unsigned short flags, char read_write,
+			   u8 command, int size, union i2c_smbus_data *data);
+
+	/* To determine what the adapter supports */
+	u32 (*functionality) (struct i2c_adapter *);
+};
+
+/*
+ * i2c_adapter is the structure used to identify a physical i2c bus along
+ * with the access algorithms necessary to access it.
+ */
+struct i2c_adapter {
+	struct module *owner;
+	unsigned int class;		  /* classes to allow probing for */
+	const struct i2c_algorithm *algo; /* the algorithm to access the bus */
+	void *algo_data;
+
+	/* data fields that are valid for all devices	*/
+	struct rt_mutex bus_lock;
+
+	int timeout;			/* in jiffies */
+	int retries;
+	struct device dev;		/* the adapter device */
+
+	int nr;
+	char name[48];
+	struct completion dev_released;
+
+	struct mutex userspace_clients_lock;
+	struct list_head userspace_clients;
+};
+#define to_i2c_adapter(d) container_of(d, struct i2c_adapter, dev)
+
+static inline void *i2c_get_adapdata(const struct i2c_adapter *dev)
+{
+	return dev_get_drvdata(&dev->dev);
+}
+
+static inline void i2c_set_adapdata(struct i2c_adapter *dev, void *data)
+{
+	dev_set_drvdata(&dev->dev, data);
+}
+
+static inline struct i2c_adapter *
+i2c_parent_is_i2c_adapter(const struct i2c_adapter *adapter)
+{
+	struct device *parent = adapter->dev.parent;
+
+	if (parent != NULL && parent->type == &i2c_adapter_type)
+		return to_i2c_adapter(parent);
+	else
+		return NULL;
+}
+
+int i2c_for_each_dev(void *data, int (*fn)(struct device *, void *));
+
+/* Adapter locking functions, exported for shared pin cases */
+void i2c_lock_adapter(struct i2c_adapter *);
+void i2c_unlock_adapter(struct i2c_adapter *);
+
+/*flags for the client struct: */
+#define I2C_CLIENT_PEC	0x04		/* Use Packet Error Checking */
+#define I2C_CLIENT_TEN	0x10		/* we have a ten bit chip address */
+					/* Must equal I2C_M_TEN below */
+#define I2C_CLIENT_WAKE	0x80		/* for board_info; true iff can wake */
+
+/* i2c adapter classes (bitmask) */
+#define I2C_CLASS_HWMON		(1<<0)	/* lm_sensors, ... */
+#define I2C_CLASS_DDC		(1<<3)	/* DDC bus on graphics adapters */
+#define I2C_CLASS_SPD		(1<<7)	/* Memory modules */
+
+/* Internal numbers to terminate lists */
+#define I2C_CLIENT_END		0xfffeU
+
+/* Construct an I2C_CLIENT_END-terminated array of i2c addresses */
+#define I2C_ADDRS(addr, addrs...) \
+	((const unsigned short []){ addr, ## addrs, I2C_CLIENT_END })
+
+
+/* ----- functions exported by i2c.o */
+
+/* administration...
+ */
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+extern int i2c_add_adapter(struct i2c_adapter *);
+extern int i2c_del_adapter(struct i2c_adapter *);
+extern int i2c_add_numbered_adapter(struct i2c_adapter *);
+
+extern int i2c_register_driver(struct module *, struct i2c_driver *);
+extern void i2c_del_driver(struct i2c_driver *);
+
+/* use a define to avoid include chaining to get THIS_MODULE */
+#define i2c_add_driver(driver) \
+	i2c_register_driver(THIS_MODULE, driver)
+
+extern struct i2c_client *i2c_use_client(struct i2c_client *client);
+extern void i2c_release_client(struct i2c_client *client);
+
+/* call the i2c_client->command() of all attached clients with
+ * the given arguments */
+extern void i2c_clients_command(struct i2c_adapter *adap,
+				unsigned int cmd, void *arg);
+
+extern struct i2c_adapter *i2c_get_adapter(int nr);
+extern void i2c_put_adapter(struct i2c_adapter *adap);
+
+
+/* Return the functionality mask */
+static inline u32 i2c_get_functionality(struct i2c_adapter *adap)
+{
+	return adap->algo->functionality(adap);
+}
+
+/* Return 1 if adapter supports everything we need, 0 if not. */
+static inline int i2c_check_functionality(struct i2c_adapter *adap, u32 func)
+{
+	return (func & i2c_get_functionality(adap)) == func;
+}
+
+/* Return the adapter number for a specific adapter */
+static inline int i2c_adapter_id(struct i2c_adapter *adap)
+{
+	return adap->nr;
+}
+
+/**
+ * module_i2c_driver() - Helper macro for registering a I2C driver
+ * @__i2c_driver: i2c_driver struct
+ *
+ * Helper macro for I2C drivers which do not do anything special in module
+ * init/exit. This eliminates a lot of boilerplate. Each module may only
+ * use this macro once, and calling it replaces module_init() and module_exit()
+ */
+#define module_i2c_driver(__i2c_driver) \
+	module_driver(__i2c_driver, i2c_add_driver, \
+			i2c_del_driver)
+
+#endif /* I2C */
+#endif /* __KERNEL__ */
+
+/**
+ * struct i2c_msg - an I2C transaction segment beginning with START
+ * @addr: Slave address, either seven or ten bits.  When this is a ten
+ *	bit address, I2C_M_TEN must be set in @flags and the adapter
+ *	must support I2C_FUNC_10BIT_ADDR.
+ * @flags: I2C_M_RD is handled by all adapters.  No other flags may be
+ *	provided unless the adapter exported the relevant I2C_FUNC_*
+ *	flags through i2c_check_functionality().
+ * @len: Number of data bytes in @buf being read from or written to the
+ *	I2C slave address.  For read transactions where I2C_M_RECV_LEN
+ *	is set, the caller guarantees that this buffer can hold up to
+ *	32 bytes in addition to the initial length byte sent by the
+ *	slave (plus, if used, the SMBus PEC); and this value will be
+ *	incremented by the number of block data bytes received.
+ * @buf: The buffer into which data is read, or from which it's written.
+ *
+ * An i2c_msg is the low level representation of one segment of an I2C
+ * transaction.  It is visible to drivers in the @i2c_transfer() procedure,
+ * to userspace from i2c-dev, and to I2C adapter drivers through the
+ * @i2c_adapter.@master_xfer() method.
+ *
+ * Except when I2C "protocol mangling" is used, all I2C adapters implement
+ * the standard rules for I2C transactions.  Each transaction begins with a
+ * START.  That is followed by the slave address, and a bit encoding read
+ * versus write.  Then follow all the data bytes, possibly including a byte
+ * with SMBus PEC.  The transfer terminates with a NAK, or when all those
+ * bytes have been transferred and ACKed.  If this is the last message in a
+ * group, it is followed by a STOP.  Otherwise it is followed by the next
+ * @i2c_msg transaction segment, beginning with a (repeated) START.
+ *
+ * Alternatively, when the adapter supports I2C_FUNC_PROTOCOL_MANGLING then
+ * passing certain @flags may have changed those standard protocol behaviors.
+ * Those flags are only for use with broken/nonconforming slaves, and with
+ * adapters which are known to support the specific mangling options they
+ * need (one or more of IGNORE_NAK, NO_RD_ACK, NOSTART, and REV_DIR_ADDR).
+ */
+struct i2c_msg {
+	__u16 addr;	/* slave address			*/
+	__u16 flags;
+#define I2C_M_TEN		0x0010	/* this is a ten bit chip address */
+#define I2C_M_RD		0x0001	/* read data, from slave to master */
+#define I2C_M_NOSTART		0x4000	/* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_REV_DIR_ADDR	0x2000	/* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_IGNORE_NAK	0x1000	/* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_NO_RD_ACK		0x0800	/* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_RECV_LEN		0x0400	/* length will be first received byte */
+	__u16 len;		/* msg length				*/
+	__u8 *buf;		/* pointer to msg data			*/
+};
+
+/* To determine what functionality is present */
+
+#define I2C_FUNC_I2C			0x00000001
+#define I2C_FUNC_10BIT_ADDR		0x00000002
+#define I2C_FUNC_PROTOCOL_MANGLING	0x00000004 /* I2C_M_NOSTART etc. */
+#define I2C_FUNC_SMBUS_PEC		0x00000008
+#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL	0x00008000 /* SMBus 2.0 */
+#define I2C_FUNC_SMBUS_QUICK		0x00010000
+#define I2C_FUNC_SMBUS_READ_BYTE	0x00020000
+#define I2C_FUNC_SMBUS_WRITE_BYTE	0x00040000
+#define I2C_FUNC_SMBUS_READ_BYTE_DATA	0x00080000
+#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA	0x00100000
+#define I2C_FUNC_SMBUS_READ_WORD_DATA	0x00200000
+#define I2C_FUNC_SMBUS_WRITE_WORD_DATA	0x00400000
+#define I2C_FUNC_SMBUS_PROC_CALL	0x00800000
+#define I2C_FUNC_SMBUS_READ_BLOCK_DATA	0x01000000
+#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
+#define I2C_FUNC_SMBUS_READ_I2C_BLOCK	0x04000000 /* I2C-like block xfer  */
+#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK	0x08000000 /* w/ 1-byte reg. addr. */
+
+#define I2C_FUNC_SMBUS_BYTE		(I2C_FUNC_SMBUS_READ_BYTE | \
+					 I2C_FUNC_SMBUS_WRITE_BYTE)
+#define I2C_FUNC_SMBUS_BYTE_DATA	(I2C_FUNC_SMBUS_READ_BYTE_DATA | \
+					 I2C_FUNC_SMBUS_WRITE_BYTE_DATA)
+#define I2C_FUNC_SMBUS_WORD_DATA	(I2C_FUNC_SMBUS_READ_WORD_DATA | \
+					 I2C_FUNC_SMBUS_WRITE_WORD_DATA)
+#define I2C_FUNC_SMBUS_BLOCK_DATA	(I2C_FUNC_SMBUS_READ_BLOCK_DATA | \
+					 I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)
+#define I2C_FUNC_SMBUS_I2C_BLOCK	(I2C_FUNC_SMBUS_READ_I2C_BLOCK | \
+					 I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)
+
+#define I2C_FUNC_SMBUS_EMUL		(I2C_FUNC_SMBUS_QUICK | \
+					 I2C_FUNC_SMBUS_BYTE | \
+					 I2C_FUNC_SMBUS_BYTE_DATA | \
+					 I2C_FUNC_SMBUS_WORD_DATA | \
+					 I2C_FUNC_SMBUS_PROC_CALL | \
+					 I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \
+					 I2C_FUNC_SMBUS_I2C_BLOCK | \
+					 I2C_FUNC_SMBUS_PEC)
+
+/*
+ * Data for SMBus Messages
+ */
+#define I2C_SMBUS_BLOCK_MAX	32	/* As specified in SMBus standard */
+union i2c_smbus_data {
+	__u8 byte;
+	__u16 word;
+	__u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */
+			       /* and one more for user-space compatibility */
+};
+
+/* i2c_smbus_xfer read or write markers */
+#define I2C_SMBUS_READ	1
+#define I2C_SMBUS_WRITE	0
+
+/* SMBus transaction types (size parameter in the above functions)
+   Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */
+#define I2C_SMBUS_QUICK		    0
+#define I2C_SMBUS_BYTE		    1
+#define I2C_SMBUS_BYTE_DATA	    2
+#define I2C_SMBUS_WORD_DATA	    3
+#define I2C_SMBUS_PROC_CALL	    4
+#define I2C_SMBUS_BLOCK_DATA	    5
+#define I2C_SMBUS_I2C_BLOCK_BROKEN  6
+#define I2C_SMBUS_BLOCK_PROC_CALL   7		/* SMBus 2.0 */
+#define I2C_SMBUS_I2C_BLOCK_DATA    8
+
+#endif /* _LINUX_I2C_H */
diff --git a/include/linux/i2c/adp5588.h b/include/linux/i2c/adp5588.h
new file mode 100644
index 00000000..cec17cf6
--- /dev/null
+++ b/include/linux/i2c/adp5588.h
@@ -0,0 +1,171 @@
+/*
+ * Analog Devices ADP5588 I/O Expander and QWERTY Keypad Controller
+ *
+ * Copyright 2009-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _ADP5588_H
+#define _ADP5588_H
+
+#define DEV_ID 0x00		/* Device ID */
+#define CFG 0x01		/* Configuration Register1 */
+#define INT_STAT 0x02		/* Interrupt Status Register */
+#define KEY_LCK_EC_STAT 0x03	/* Key Lock and Event Counter Register */
+#define Key_EVENTA 0x04		/* Key Event Register A */
+#define Key_EVENTB 0x05		/* Key Event Register B */
+#define Key_EVENTC 0x06		/* Key Event Register C */
+#define Key_EVENTD 0x07		/* Key Event Register D */
+#define Key_EVENTE 0x08		/* Key Event Register E */
+#define Key_EVENTF 0x09		/* Key Event Register F */
+#define Key_EVENTG 0x0A		/* Key Event Register G */
+#define Key_EVENTH 0x0B		/* Key Event Register H */
+#define Key_EVENTI 0x0C		/* Key Event Register I */
+#define Key_EVENTJ 0x0D		/* Key Event Register J */
+#define KP_LCK_TMR 0x0E		/* Keypad Lock1 to Lock2 Timer */
+#define UNLOCK1 0x0F		/* Unlock Key1 */
+#define UNLOCK2 0x10		/* Unlock Key2 */
+#define GPIO_INT_STAT1 0x11	/* GPIO Interrupt Status */
+#define GPIO_INT_STAT2 0x12	/* GPIO Interrupt Status */
+#define GPIO_INT_STAT3 0x13	/* GPIO Interrupt Status */
+#define GPIO_DAT_STAT1 0x14	/* GPIO Data Status, Read twice to clear */
+#define GPIO_DAT_STAT2 0x15	/* GPIO Data Status, Read twice to clear */
+#define GPIO_DAT_STAT3 0x16	/* GPIO Data Status, Read twice to clear */
+#define GPIO_DAT_OUT1 0x17	/* GPIO DATA OUT */
+#define GPIO_DAT_OUT2 0x18	/* GPIO DATA OUT */
+#define GPIO_DAT_OUT3 0x19	/* GPIO DATA OUT */
+#define GPIO_INT_EN1 0x1A	/* GPIO Interrupt Enable */
+#define GPIO_INT_EN2 0x1B	/* GPIO Interrupt Enable */
+#define GPIO_INT_EN3 0x1C	/* GPIO Interrupt Enable */
+#define KP_GPIO1 0x1D		/* Keypad or GPIO Selection */
+#define KP_GPIO2 0x1E		/* Keypad or GPIO Selection */
+#define KP_GPIO3 0x1F		/* Keypad or GPIO Selection */
+#define GPI_EM1 0x20		/* GPI Event Mode 1 */
+#define GPI_EM2 0x21		/* GPI Event Mode 2 */
+#define GPI_EM3 0x22		/* GPI Event Mode 3 */
+#define GPIO_DIR1 0x23		/* GPIO Data Direction */
+#define GPIO_DIR2 0x24		/* GPIO Data Direction */
+#define GPIO_DIR3 0x25		/* GPIO Data Direction */
+#define GPIO_INT_LVL1 0x26	/* GPIO Edge/Level Detect */
+#define GPIO_INT_LVL2 0x27	/* GPIO Edge/Level Detect */
+#define GPIO_INT_LVL3 0x28	/* GPIO Edge/Level Detect */
+#define Debounce_DIS1 0x29	/* Debounce Disable */
+#define Debounce_DIS2 0x2A	/* Debounce Disable */
+#define Debounce_DIS3 0x2B	/* Debounce Disable */
+#define GPIO_PULL1 0x2C		/* GPIO Pull Disable */
+#define GPIO_PULL2 0x2D		/* GPIO Pull Disable */
+#define GPIO_PULL3 0x2E		/* GPIO Pull Disable */
+#define CMP_CFG_STAT 0x30	/* Comparator Configuration and Status Register */
+#define CMP_CONFG_SENS1 0x31	/* Sensor1 Comparator Configuration Register */
+#define CMP_CONFG_SENS2 0x32	/* L2 Light Sensor Reference Level, Output Falling for Sensor 1 */
+#define CMP1_LVL2_TRIP 0x33	/* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 1 */
+#define CMP1_LVL2_HYS 0x34	/* L3 Light Sensor Reference Level, Output Falling For Sensor 1 */
+#define CMP1_LVL3_TRIP 0x35	/* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 1 */
+#define CMP1_LVL3_HYS 0x36	/* Sensor 2 Comparator Configuration Register */
+#define CMP2_LVL2_TRIP 0x37	/* L2 Light Sensor Reference Level, Output Falling for Sensor 2 */
+#define CMP2_LVL2_HYS 0x38	/* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 2 */
+#define CMP2_LVL3_TRIP 0x39	/* L3 Light Sensor Reference Level, Output Falling For Sensor 2 */
+#define CMP2_LVL3_HYS 0x3A	/* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 2 */
+#define CMP1_ADC_DAT_R1 0x3B	/* Comparator 1 ADC data Register1 */
+#define CMP1_ADC_DAT_R2 0x3C	/* Comparator 1 ADC data Register2 */
+#define CMP2_ADC_DAT_R1 0x3D	/* Comparator 2 ADC data Register1 */
+#define CMP2_ADC_DAT_R2 0x3E	/* Comparator 2 ADC data Register2 */
+
+#define ADP5588_DEVICE_ID_MASK	0xF
+
+ /* Configuration Register1 */
+#define ADP5588_AUTO_INC	(1 << 7)
+#define ADP5588_GPIEM_CFG	(1 << 6)
+#define ADP5588_OVR_FLOW_M	(1 << 5)
+#define ADP5588_INT_CFG		(1 << 4)
+#define ADP5588_OVR_FLOW_IEN	(1 << 3)
+#define ADP5588_K_LCK_IM	(1 << 2)
+#define ADP5588_GPI_IEN		(1 << 1)
+#define ADP5588_KE_IEN		(1 << 0)
+
+/* Interrupt Status Register */
+#define ADP5588_CMP2_INT	(1 << 5)
+#define ADP5588_CMP1_INT	(1 << 4)
+#define ADP5588_OVR_FLOW_INT	(1 << 3)
+#define ADP5588_K_LCK_INT	(1 << 2)
+#define ADP5588_GPI_INT		(1 << 1)
+#define ADP5588_KE_INT		(1 << 0)
+
+/* Key Lock and Event Counter Register */
+#define ADP5588_K_LCK_EN	(1 << 6)
+#define ADP5588_LCK21		0x30
+#define ADP5588_KEC		0xF
+
+#define ADP5588_MAXGPIO		18
+#define ADP5588_BANK(offs)	((offs) >> 3)
+#define ADP5588_BIT(offs)	(1u << ((offs) & 0x7))
+
+/* Put one of these structures in i2c_board_info platform_data */
+
+#define ADP5588_KEYMAPSIZE	80
+
+#define GPI_PIN_ROW0 97
+#define GPI_PIN_ROW1 98
+#define GPI_PIN_ROW2 99
+#define GPI_PIN_ROW3 100
+#define GPI_PIN_ROW4 101
+#define GPI_PIN_ROW5 102
+#define GPI_PIN_ROW6 103
+#define GPI_PIN_ROW7 104
+#define GPI_PIN_COL0 105
+#define GPI_PIN_COL1 106
+#define GPI_PIN_COL2 107
+#define GPI_PIN_COL3 108
+#define GPI_PIN_COL4 109
+#define GPI_PIN_COL5 110
+#define GPI_PIN_COL6 111
+#define GPI_PIN_COL7 112
+#define GPI_PIN_COL8 113
+#define GPI_PIN_COL9 114
+
+#define GPI_PIN_ROW_BASE GPI_PIN_ROW0
+#define GPI_PIN_ROW_END GPI_PIN_ROW7
+#define GPI_PIN_COL_BASE GPI_PIN_COL0
+#define GPI_PIN_COL_END GPI_PIN_COL9
+
+#define GPI_PIN_BASE GPI_PIN_ROW_BASE
+#define GPI_PIN_END GPI_PIN_COL_END
+
+#define ADP5588_GPIMAPSIZE_MAX (GPI_PIN_END - GPI_PIN_BASE + 1)
+
+struct adp5588_gpi_map {
+	unsigned short pin;
+	unsigned short sw_evt;
+};
+
+struct adp5588_kpad_platform_data {
+	int rows;			/* Number of rows */
+	int cols;			/* Number of columns */
+	const unsigned short *keymap;	/* Pointer to keymap */
+	unsigned short keymapsize;	/* Keymap size */
+	unsigned repeat:1;		/* Enable key repeat */
+	unsigned en_keylock:1;		/* Enable Key Lock feature */
+	unsigned short unlock_key1;	/* Unlock Key 1 */
+	unsigned short unlock_key2;	/* Unlock Key 2 */
+	const struct adp5588_gpi_map *gpimap;
+	unsigned short gpimapsize;
+	const struct adp5588_gpio_platform_data *gpio_data;
+};
+
+struct i2c_client; /* forward declaration */
+
+struct adp5588_gpio_platform_data {
+	int gpio_start;		/* GPIO Chip base # */
+	unsigned irq_base;	/* interrupt base # */
+	unsigned pullup_dis_mask; /* Pull-Up Disable Mask */
+	int	(*setup)(struct i2c_client *client,
+				int gpio, unsigned ngpio,
+				void *context);
+	int	(*teardown)(struct i2c_client *client,
+				int gpio, unsigned ngpio,
+				void *context);
+	void	*context;
+};
+
+#endif
diff --git a/include/linux/i2c/adp8860.h b/include/linux/i2c/adp8860.h
new file mode 100644
index 00000000..0b4d3985
--- /dev/null
+++ b/include/linux/i2c/adp8860.h
@@ -0,0 +1,154 @@
+/*
+ * Definitions and platform data for Analog Devices
+ * Backlight drivers ADP8860
+ *
+ * Copyright 2009-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __LINUX_I2C_ADP8860_H
+#define __LINUX_I2C_ADP8860_H
+
+#include <linux/leds.h>
+#include <linux/types.h>
+
+#define ID_ADP8860		8860
+
+#define ADP8860_MAX_BRIGHTNESS	0x7F
+#define FLAG_OFFT_SHIFT 8
+
+/*
+ * LEDs subdevice platform data
+ */
+
+#define ADP8860_LED_DIS_BLINK	(0 << FLAG_OFFT_SHIFT)
+#define ADP8860_LED_OFFT_600ms	(1 << FLAG_OFFT_SHIFT)
+#define ADP8860_LED_OFFT_1200ms	(2 << FLAG_OFFT_SHIFT)
+#define ADP8860_LED_OFFT_1800ms	(3 << FLAG_OFFT_SHIFT)
+
+#define ADP8860_LED_ONT_200ms	0
+#define ADP8860_LED_ONT_600ms	1
+#define ADP8860_LED_ONT_800ms	2
+#define ADP8860_LED_ONT_1200ms	3
+
+#define ADP8860_LED_D7		(7)
+#define ADP8860_LED_D6		(6)
+#define ADP8860_LED_D5		(5)
+#define ADP8860_LED_D4		(4)
+#define ADP8860_LED_D3		(3)
+#define ADP8860_LED_D2		(2)
+#define ADP8860_LED_D1		(1)
+
+/*
+ * Backlight subdevice platform data
+ */
+
+#define ADP8860_BL_D7		(1 << 6)
+#define ADP8860_BL_D6		(1 << 5)
+#define ADP8860_BL_D5		(1 << 4)
+#define ADP8860_BL_D4		(1 << 3)
+#define ADP8860_BL_D3		(1 << 2)
+#define ADP8860_BL_D2		(1 << 1)
+#define ADP8860_BL_D1		(1 << 0)
+
+#define ADP8860_FADE_T_DIS	0	/* Fade Timer Disabled */
+#define ADP8860_FADE_T_300ms	1	/* 0.3 Sec */
+#define ADP8860_FADE_T_600ms	2
+#define ADP8860_FADE_T_900ms	3
+#define ADP8860_FADE_T_1200ms	4
+#define ADP8860_FADE_T_1500ms	5
+#define ADP8860_FADE_T_1800ms	6
+#define ADP8860_FADE_T_2100ms	7
+#define ADP8860_FADE_T_2400ms	8
+#define ADP8860_FADE_T_2700ms	9
+#define ADP8860_FADE_T_3000ms	10
+#define ADP8860_FADE_T_3500ms	11
+#define ADP8860_FADE_T_4000ms	12
+#define ADP8860_FADE_T_4500ms	13
+#define ADP8860_FADE_T_5000ms	14
+#define ADP8860_FADE_T_5500ms	15	/* 5.5 Sec */
+
+#define ADP8860_FADE_LAW_LINEAR	0
+#define ADP8860_FADE_LAW_SQUARE	1
+#define ADP8860_FADE_LAW_CUBIC1	2
+#define ADP8860_FADE_LAW_CUBIC2	3
+
+#define ADP8860_BL_AMBL_FILT_80ms	0	/* Light sensor filter time */
+#define ADP8860_BL_AMBL_FILT_160ms	1
+#define ADP8860_BL_AMBL_FILT_320ms	2
+#define ADP8860_BL_AMBL_FILT_640ms	3
+#define ADP8860_BL_AMBL_FILT_1280ms	4
+#define ADP8860_BL_AMBL_FILT_2560ms	5
+#define ADP8860_BL_AMBL_FILT_5120ms	6
+#define ADP8860_BL_AMBL_FILT_10240ms	7	/* 10.24 sec */
+
+/*
+ * Blacklight current 0..30mA
+ */
+#define ADP8860_BL_CUR_mA(I)		((I * 127) / 30)
+
+/*
+ * L2 comparator current 0..1106uA
+ */
+#define ADP8860_L2_COMP_CURR_uA(I)	((I * 255) / 1106)
+
+/*
+ * L3 comparator current 0..138uA
+ */
+#define ADP8860_L3_COMP_CURR_uA(I)	((I * 255) / 138)
+
+struct adp8860_backlight_platform_data {
+	u8 bl_led_assign;	/* 1 = Backlight 0 = Individual LED */
+
+	u8 bl_fade_in;		/* Backlight Fade-In Timer */
+	u8 bl_fade_out;		/* Backlight Fade-Out Timer */
+	u8 bl_fade_law;		/* fade-on/fade-off transfer characteristic */
+
+	u8 en_ambl_sens;	/* 1 = enable ambient light sensor */
+	u8 abml_filt;		/* Light sensor filter time */
+
+	u8 l1_daylight_max;	/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	u8 l1_daylight_dim;	/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	u8 l2_office_max;	/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	u8 l2_office_dim;	/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	u8 l3_dark_max;		/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	u8 l3_dark_dim;		/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+
+	u8 l2_trip;		/* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+	u8 l2_hyst;		/* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+	u8 l3_trip;		/* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
+	u8 l3_hyst;		/* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
+
+	/**
+	 * Independent Current Sinks / LEDS
+	 * Sinks not assigned to the Backlight can be exposed to
+	 * user space using the LEDS CLASS interface
+	 */
+
+	int num_leds;
+	struct led_info	*leds;
+	u8 led_fade_in;		/* LED Fade-In Timer */
+	u8 led_fade_out;	/* LED Fade-Out Timer */
+	u8 led_fade_law;	/* fade-on/fade-off transfer characteristic */
+	u8 led_on_time;
+
+	/**
+	 * Gain down disable. Setting this option does not allow the
+	 * charge pump to switch to lower gains. NOT AVAILABLE on ADP8860
+	 * 1 = the charge pump doesn't switch down in gain until all LEDs are 0.
+	 *  The charge pump switches up in gain as needed. This feature is
+	 *  useful if the ADP8863 charge pump is used to drive an external load.
+	 *  This feature must be used when utilizing small fly capacitors
+	 *  (0402 or smaller).
+	 * 0 = the charge pump automatically switches up and down in gain.
+	 *  This provides optimal efficiency, but is not suitable for driving
+	 *  loads that are not connected through the ADP8863 diode drivers.
+	 *  Additionally, the charge pump fly capacitors should be low ESR
+	 * and sized 0603 or greater.
+	 */
+
+	u8 gdwn_dis;
+};
+
+#endif /* __LINUX_I2C_ADP8860_H */
diff --git a/include/linux/i2c/adp8870.h b/include/linux/i2c/adp8870.h
new file mode 100644
index 00000000..624dcecc
--- /dev/null
+++ b/include/linux/i2c/adp8870.h
@@ -0,0 +1,153 @@
+/*
+ * Definitions and platform data for Analog Devices
+ * Backlight drivers ADP8870
+ *
+ * Copyright 2009-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __LINUX_I2C_ADP8870_H
+#define __LINUX_I2C_ADP8870_H
+
+#define ID_ADP8870		8870
+
+#define ADP8870_MAX_BRIGHTNESS	0x7F
+#define FLAG_OFFT_SHIFT 8
+
+/*
+ * LEDs subdevice platform data
+ */
+
+#define ADP8870_LED_DIS_BLINK	(0 << FLAG_OFFT_SHIFT)
+#define ADP8870_LED_OFFT_600ms	(1 << FLAG_OFFT_SHIFT)
+#define ADP8870_LED_OFFT_1200ms	(2 << FLAG_OFFT_SHIFT)
+#define ADP8870_LED_OFFT_1800ms	(3 << FLAG_OFFT_SHIFT)
+
+#define ADP8870_LED_ONT_200ms	0
+#define ADP8870_LED_ONT_600ms	1
+#define ADP8870_LED_ONT_800ms	2
+#define ADP8870_LED_ONT_1200ms	3
+
+#define ADP8870_LED_D7		(7)
+#define ADP8870_LED_D6		(6)
+#define ADP8870_LED_D5		(5)
+#define ADP8870_LED_D4		(4)
+#define ADP8870_LED_D3		(3)
+#define ADP8870_LED_D2		(2)
+#define ADP8870_LED_D1		(1)
+
+/*
+ * Backlight subdevice platform data
+ */
+
+#define ADP8870_BL_D7		(1 << 6)
+#define ADP8870_BL_D6		(1 << 5)
+#define ADP8870_BL_D5		(1 << 4)
+#define ADP8870_BL_D4		(1 << 3)
+#define ADP8870_BL_D3		(1 << 2)
+#define ADP8870_BL_D2		(1 << 1)
+#define ADP8870_BL_D1		(1 << 0)
+
+#define ADP8870_FADE_T_DIS	0	/* Fade Timer Disabled */
+#define ADP8870_FADE_T_300ms	1	/* 0.3 Sec */
+#define ADP8870_FADE_T_600ms	2
+#define ADP8870_FADE_T_900ms	3
+#define ADP8870_FADE_T_1200ms	4
+#define ADP8870_FADE_T_1500ms	5
+#define ADP8870_FADE_T_1800ms	6
+#define ADP8870_FADE_T_2100ms	7
+#define ADP8870_FADE_T_2400ms	8
+#define ADP8870_FADE_T_2700ms	9
+#define ADP8870_FADE_T_3000ms	10
+#define ADP8870_FADE_T_3500ms	11
+#define ADP8870_FADE_T_4000ms	12
+#define ADP8870_FADE_T_4500ms	13
+#define ADP8870_FADE_T_5000ms	14
+#define ADP8870_FADE_T_5500ms	15	/* 5.5 Sec */
+
+#define ADP8870_FADE_LAW_LINEAR	0
+#define ADP8870_FADE_LAW_SQUARE	1
+#define ADP8870_FADE_LAW_CUBIC1	2
+#define ADP8870_FADE_LAW_CUBIC2	3
+
+#define ADP8870_BL_AMBL_FILT_80ms	0	/* Light sensor filter time */
+#define ADP8870_BL_AMBL_FILT_160ms	1
+#define ADP8870_BL_AMBL_FILT_320ms	2
+#define ADP8870_BL_AMBL_FILT_640ms	3
+#define ADP8870_BL_AMBL_FILT_1280ms	4
+#define ADP8870_BL_AMBL_FILT_2560ms	5
+#define ADP8870_BL_AMBL_FILT_5120ms	6
+#define ADP8870_BL_AMBL_FILT_10240ms	7	/* 10.24 sec */
+
+/*
+ * Blacklight current 0..30mA
+ */
+#define ADP8870_BL_CUR_mA(I)		((I * 127) / 30)
+
+/*
+ * L2 comparator current 0..1106uA
+ */
+#define ADP8870_L2_COMP_CURR_uA(I)	((I * 255) / 1106)
+
+/*
+ * L3 comparator current 0..551uA
+ */
+#define ADP8870_L3_COMP_CURR_uA(I)	((I * 255) / 551)
+
+/*
+ * L4 comparator current 0..275uA
+ */
+#define ADP8870_L4_COMP_CURR_uA(I)	((I * 255) / 275)
+
+/*
+ * L5 comparator current 0..138uA
+ */
+#define ADP8870_L5_COMP_CURR_uA(I)	((I * 255) / 138)
+
+struct adp8870_backlight_platform_data {
+	u8 bl_led_assign;	/* 1 = Backlight 0 = Individual LED */
+	u8 pwm_assign;		/* 1 = Enables PWM mode */
+
+	u8 bl_fade_in;		/* Backlight Fade-In Timer */
+	u8 bl_fade_out;		/* Backlight Fade-Out Timer */
+	u8 bl_fade_law;		/* fade-on/fade-off transfer characteristic */
+
+	u8 en_ambl_sens;	/* 1 = enable ambient light sensor */
+	u8 abml_filt;		/* Light sensor filter time */
+
+	u8 l1_daylight_max;	/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	u8 l1_daylight_dim;	/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	u8 l2_bright_max;	/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	u8 l2_bright_dim;	/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	u8 l3_office_max;	/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	u8 l3_office_dim;	/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	u8 l4_indoor_max;	/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	u8 l4_indor_dim;	/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	u8 l5_dark_max;		/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	u8 l5_dark_dim;		/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+
+	u8 l2_trip;		/* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+	u8 l2_hyst;		/* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+	u8 l3_trip;		/* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
+	u8 l3_hyst;		/* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
+	u8 l4_trip;		/* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
+	u8 l4_hyst;		/* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
+	u8 l5_trip;		/* use L5_COMP_CURR_uA(I) 0 <= I <= 138 uA */
+	u8 l5_hyst;		/* use L6_COMP_CURR_uA(I) 0 <= I <= 138 uA */
+
+	/**
+	 * Independent Current Sinks / LEDS
+	 * Sinks not assigned to the Backlight can be exposed to
+	 * user space using the LEDS CLASS interface
+	 */
+
+	int num_leds;
+	struct led_info	*leds;
+	u8 led_fade_in;		/* LED Fade-In Timer */
+	u8 led_fade_out;	/* LED Fade-Out Timer */
+	u8 led_fade_law;	/* fade-on/fade-off transfer characteristic */
+	u8 led_on_time;
+};
+
+#endif /* __LINUX_I2C_ADP8870_H */
diff --git a/include/linux/i2c/ads1015.h b/include/linux/i2c/ads1015.h
new file mode 100644
index 00000000..d5aa2a04
--- /dev/null
+++ b/include/linux/i2c/ads1015.h
@@ -0,0 +1,36 @@
+/*
+ * Platform Data for ADS1015 12-bit 4-input ADC
+ * (C) Copyright 2010
+ * Dirk Eibach, Guntermann & Drunck GmbH <eibach@gdsys.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef LINUX_ADS1015_H
+#define LINUX_ADS1015_H
+
+#define ADS1015_CHANNELS 8
+
+struct ads1015_channel_data {
+	bool enabled;
+	unsigned int pga;
+	unsigned int data_rate;
+};
+
+struct ads1015_platform_data {
+	struct ads1015_channel_data channel_data[ADS1015_CHANNELS];
+};
+
+#endif /* LINUX_ADS1015_H */
diff --git a/include/linux/i2c/apds990x.h b/include/linux/i2c/apds990x.h
new file mode 100644
index 00000000..d186fcc5
--- /dev/null
+++ b/include/linux/i2c/apds990x.h
@@ -0,0 +1,79 @@
+/*
+ * This file is part of the APDS990x sensor driver.
+ * Chip is combined proximity and ambient light sensor.
+ *
+ * Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __APDS990X_H__
+#define __APDS990X_H__
+
+
+#define APDS_IRLED_CURR_12mA	0x3
+#define APDS_IRLED_CURR_25mA	0x2
+#define APDS_IRLED_CURR_50mA	0x1
+#define APDS_IRLED_CURR_100mA	0x0
+
+/**
+ * struct apds990x_chip_factors - defines effect of the cover window
+ * @ga: Total glass attenuation
+ * @cf1: clear channel factor 1 for raw to lux conversion
+ * @irf1: IR channel factor 1 for raw to lux conversion
+ * @cf2: clear channel factor 2 for raw to lux conversion
+ * @irf2: IR channel factor 2 for raw to lux conversion
+ * @df: device factor for conversion formulas
+ *
+ * Structure for tuning ALS calculation to match with environment.
+ * Values depend on the material above the sensor and the sensor
+ * itself. If the GA is zero, driver will use uncovered sensor default values
+ * format: decimal value * APDS_PARAM_SCALE except df which is plain integer.
+ */
+#define APDS_PARAM_SCALE 4096
+struct apds990x_chip_factors {
+	int ga;
+	int cf1;
+	int irf1;
+	int cf2;
+	int irf2;
+	int df;
+};
+
+/**
+ * struct apds990x_platform_data - platform data for apsd990x.c driver
+ * @cf: chip factor data
+ * @pddrive: IR-led driving current
+ * @ppcount: number of IR pulses used for proximity estimation
+ * @setup_resources: interrupt line setup call back function
+ * @release_resources: interrupt line release call back function
+ *
+ * Proximity detection result depends heavily on correct ppcount, pdrive
+ * and cover window.
+ *
+ */
+
+struct apds990x_platform_data {
+	struct apds990x_chip_factors cf;
+	u8     pdrive;
+	u8     ppcount;
+	int    (*setup_resources)(void);
+	int    (*release_resources)(void);
+};
+
+#endif
diff --git a/include/linux/i2c/at24.h b/include/linux/i2c/at24.h
new file mode 100644
index 00000000..285025a9
--- /dev/null
+++ b/include/linux/i2c/at24.h
@@ -0,0 +1,55 @@
+/*
+ * at24.h - platform_data for the at24 (generic eeprom) driver
+ * (C) Copyright 2008 by Pengutronix
+ * (C) Copyright 2012 by Wolfram Sang
+ * same license as the driver
+ */
+
+#ifndef _LINUX_AT24_H
+#define _LINUX_AT24_H
+
+#include <linux/types.h>
+#include <linux/memory.h>
+
+/**
+ * struct at24_platform_data - data to set up at24 (generic eeprom) driver
+ * @byte_len: size of eeprom in byte
+ * @page_size: number of byte which can be written in one go
+ * @flags: tunable options, check AT24_FLAG_* defines
+ * @setup: an optional callback invoked after eeprom is probed; enables kernel
+	code to access eeprom via memory_accessor, see example
+ * @context: optional parameter passed to setup()
+ *
+ * If you set up a custom eeprom type, please double-check the parameters.
+ * Especially page_size needs extra care, as you risk data loss if your value
+ * is bigger than what the chip actually supports!
+ *
+ * An example in pseudo code for a setup() callback:
+ *
+ * void get_mac_addr(struct memory_accessor *mem_acc, void *context)
+ * {
+ * 	u8 *mac_addr = ethernet_pdata->mac_addr;
+ *	off_t offset = context;
+ *
+ *	// Read MAC addr from EEPROM
+ *	if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN)
+ *		pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
+ * }
+ *
+ * This function pointer and context can now be set up in at24_platform_data.
+ */
+
+struct at24_platform_data {
+	u32		byte_len;		/* size (sum of all addr) */
+	u16		page_size;		/* for writes */
+	u8		flags;
+#define AT24_FLAG_ADDR16	0x80	/* address pointer is 16 bit */
+#define AT24_FLAG_READONLY	0x40	/* sysfs-entry will be read-only */
+#define AT24_FLAG_IRUGO		0x20	/* sysfs-entry will be world-readable */
+#define AT24_FLAG_TAKE8ADDR	0x10	/* take always 8 addresses (24c00) */
+
+	void		(*setup)(struct memory_accessor *, void *context);
+	void		*context;
+};
+
+#endif /* _LINUX_AT24_H */
diff --git a/include/linux/i2c/atmel_mxt_ts.h b/include/linux/i2c/atmel_mxt_ts.h
new file mode 100644
index 00000000..f027f7a6
--- /dev/null
+++ b/include/linux/i2c/atmel_mxt_ts.h
@@ -0,0 +1,44 @@
+/*
+ * Atmel maXTouch Touchscreen driver
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __LINUX_ATMEL_MXT_TS_H
+#define __LINUX_ATMEL_MXT_TS_H
+
+#include <linux/types.h>
+
+/* Orient */
+#define MXT_NORMAL		0x0
+#define MXT_DIAGONAL		0x1
+#define MXT_HORIZONTAL_FLIP	0x2
+#define MXT_ROTATED_90_COUNTER	0x3
+#define MXT_VERTICAL_FLIP	0x4
+#define MXT_ROTATED_90		0x5
+#define MXT_ROTATED_180		0x6
+#define MXT_DIAGONAL_COUNTER	0x7
+
+/* The platform data for the Atmel maXTouch touchscreen driver */
+struct mxt_platform_data {
+	const u8 *config;
+	size_t config_length;
+
+	unsigned int x_line;
+	unsigned int y_line;
+	unsigned int x_size;
+	unsigned int y_size;
+	unsigned int blen;
+	unsigned int threshold;
+	unsigned int voltage;
+	unsigned char orient;
+	unsigned long irqflags;
+};
+
+#endif /* __LINUX_ATMEL_MXT_TS_H */
diff --git a/include/linux/i2c/bh1770glc.h b/include/linux/i2c/bh1770glc.h
new file mode 100644
index 00000000..8b5e2df3
--- /dev/null
+++ b/include/linux/i2c/bh1770glc.h
@@ -0,0 +1,53 @@
+/*
+ * This file is part of the ROHM BH1770GLC / OSRAM SFH7770 sensor driver.
+ * Chip is combined proximity and ambient light sensor.
+ *
+ * Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __BH1770_H__
+#define __BH1770_H__
+
+/**
+ * struct bh1770_platform_data - platform data for bh1770glc driver
+ * @led_def_curr: IR led driving current.
+ * @glass_attenuation: Attenuation factor for covering window.
+ * @setup_resources: Call back for interrupt line setup function
+ * @release_resources: Call back for interrupte line release function
+ *
+ * Example of glass attenuation: 16384 * 385 / 100 means attenuation factor
+ * of 3.85. i.e. light_above_sensor = light_above_cover_window / 3.85
+ */
+
+struct bh1770_platform_data {
+#define BH1770_LED_5mA	0
+#define BH1770_LED_10mA	1
+#define BH1770_LED_20mA	2
+#define BH1770_LED_50mA	3
+#define BH1770_LED_100mA 4
+#define BH1770_LED_150mA 5
+#define BH1770_LED_200mA 6
+	__u8 led_def_curr;
+#define BH1770_NEUTRAL_GA 16384 /* 16384 / 16384 = 1 */
+	__u32 glass_attenuation;
+	int (*setup_resources)(void);
+	int (*release_resources)(void);
+};
+#endif
diff --git a/include/linux/i2c/dm355evm_msp.h b/include/linux/i2c/dm355evm_msp.h
new file mode 100644
index 00000000..37247035
--- /dev/null
+++ b/include/linux/i2c/dm355evm_msp.h
@@ -0,0 +1,79 @@
+/*
+ * dm355evm_msp.h - support MSP430 microcontroller on DM355EVM board
+ */
+#ifndef __LINUX_I2C_DM355EVM_MSP
+#define __LINUX_I2C_DM355EVM_MSP
+
+/*
+ * Written against Spectrum's writeup for the A4 firmware revision,
+ * and tweaked to match source and rev D2 schematics by removing CPLD
+ * and NOR flash hooks (which were last appropriate in rev B boards).
+ *
+ * Note that the firmware supports a flavor of write posting ... to be
+ * sure a write completes, issue another read or write.
+ */
+
+/* utilities to access "registers" emulated by msp430 firmware */
+extern int dm355evm_msp_write(u8 value, u8 reg);
+extern int dm355evm_msp_read(u8 reg);
+
+
+/* command/control registers */
+#define DM355EVM_MSP_COMMAND		0x00
+#	define MSP_COMMAND_NULL		0
+#	define MSP_COMMAND_RESET_COLD	1
+#	define MSP_COMMAND_RESET_WARM	2
+#	define MSP_COMMAND_RESET_WARM_I	3
+#	define MSP_COMMAND_POWEROFF	4
+#	define MSP_COMMAND_IR_REINIT	5
+#define DM355EVM_MSP_STATUS		0x01
+#	define MSP_STATUS_BAD_OFFSET	BIT(0)
+#	define MSP_STATUS_BAD_COMMAND	BIT(1)
+#	define MSP_STATUS_POWER_ERROR	BIT(2)
+#	define MSP_STATUS_RXBUF_OVERRUN	BIT(3)
+#define DM355EVM_MSP_RESET		0x02	/* 0 bits == in reset */
+#	define MSP_RESET_DC5		BIT(0)
+#	define MSP_RESET_TVP5154	BIT(2)
+#	define MSP_RESET_IMAGER		BIT(3)
+#	define MSP_RESET_ETHERNET	BIT(4)
+#	define MSP_RESET_SYS		BIT(5)
+#	define MSP_RESET_AIC33		BIT(7)
+
+/* GPIO registers ... bit patterns mostly match the source MSP ports */
+#define DM355EVM_MSP_LED		0x03	/* active low (MSP P4) */
+#define DM355EVM_MSP_SWITCH1		0x04	/* (MSP P5, masked) */
+#	define MSP_SWITCH1_SW6_1	BIT(0)
+#	define MSP_SWITCH1_SW6_2	BIT(1)
+#	define MSP_SWITCH1_SW6_3	BIT(2)
+#	define MSP_SWITCH1_SW6_4	BIT(3)
+#	define MSP_SWITCH1_J1		BIT(4)	/* NTSC/PAL */
+#	define MSP_SWITCH1_MSP_INT	BIT(5)	/* active low */
+#define DM355EVM_MSP_SWITCH2		0x05	/* (MSP P6, masked) */
+#	define MSP_SWITCH2_SW10		BIT(3)
+#	define MSP_SWITCH2_SW11		BIT(4)
+#	define MSP_SWITCH2_SW12		BIT(5)
+#	define MSP_SWITCH2_SW13		BIT(6)
+#	define MSP_SWITCH2_SW14		BIT(7)
+#define DM355EVM_MSP_SDMMC		0x06	/* (MSP P2, masked) */
+#	define MSP_SDMMC_0_WP		BIT(1)
+#	define MSP_SDMMC_0_CD		BIT(2)	/* active low */
+#	define MSP_SDMMC_1_WP		BIT(3)
+#	define MSP_SDMMC_1_CD		BIT(4)	/* active low */
+#define DM355EVM_MSP_FIRMREV		0x07	/* not a GPIO (out of order) */
+#define DM355EVM_MSP_VIDEO_IN		0x08	/* (MSP P3, masked) */
+#	define MSP_VIDEO_IMAGER		BIT(7)	/* low == tvp5146 */
+
+/* power supply registers are currently omitted */
+
+/* RTC registers */
+#define DM355EVM_MSP_RTC_0		0x12	/* LSB */
+#define DM355EVM_MSP_RTC_1		0x13
+#define DM355EVM_MSP_RTC_2		0x14
+#define DM355EVM_MSP_RTC_3		0x15	/* MSB */
+
+/* input event queue registers; code == ((HIGH << 8) | LOW) */
+#define DM355EVM_MSP_INPUT_COUNT	0x16	/* decrement by reading LOW */
+#define DM355EVM_MSP_INPUT_HIGH		0x17
+#define DM355EVM_MSP_INPUT_LOW		0x18
+
+#endif /* __LINUX_I2C_DM355EVM_MSP */
diff --git a/include/linux/i2c/ds620.h b/include/linux/i2c/ds620.h
new file mode 100644
index 00000000..736bb87a
--- /dev/null
+++ b/include/linux/i2c/ds620.h
@@ -0,0 +1,21 @@
+#ifndef _LINUX_DS620_H
+#define _LINUX_DS620_H
+
+#include <linux/types.h>
+#include <linux/i2c.h>
+
+/* platform data for the DS620 temperature sensor and thermostat */
+
+struct ds620_platform_data {
+	/*
+	 *  Thermostat output pin PO mode:
+	 *  0 = always low (default)
+	 *  1 = PO_LOW
+	 *  2 = PO_HIGH
+	 *
+	 * (see Documentation/hwmon/ds620)
+	 */
+	int pomode;
+};
+
+#endif /* _LINUX_DS620_H */
diff --git a/include/linux/i2c/i2c-sh_mobile.h b/include/linux/i2c/i2c-sh_mobile.h
new file mode 100644
index 00000000..beda7081
--- /dev/null
+++ b/include/linux/i2c/i2c-sh_mobile.h
@@ -0,0 +1,10 @@
+#ifndef __I2C_SH_MOBILE_H__
+#define __I2C_SH_MOBILE_H__
+
+#include <linux/platform_device.h>
+
+struct i2c_sh_mobile_platform_data {
+	unsigned long bus_speed;
+};
+
+#endif /* __I2C_SH_MOBILE_H__ */
diff --git a/include/linux/i2c/lm8323.h b/include/linux/i2c/lm8323.h
new file mode 100644
index 00000000..478d668b
--- /dev/null
+++ b/include/linux/i2c/lm8323.h
@@ -0,0 +1,46 @@
+/*
+ * lm8323.h - Configuration for LM8323 keypad driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation (version 2 of the License only).
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __LINUX_LM8323_H
+#define __LINUX_LM8323_H
+
+#include <linux/types.h>
+
+/*
+ * Largest keycode that the chip can send, plus one,
+ * so keys can be mapped directly at the index of the
+ * LM8323 keycode instead of subtracting one.
+ */
+#define LM8323_KEYMAP_SIZE	(0x7f + 1)
+
+#define LM8323_NUM_PWMS		3
+
+struct lm8323_platform_data {
+	int debounce_time; /* Time to watch for key bouncing, in ms. */
+	int active_time; /* Idle time until sleep, in ms. */
+
+	int size_x;
+	int size_y;
+	bool repeat;
+	const unsigned short *keymap;
+
+	const char *pwm_names[LM8323_NUM_PWMS];
+
+	const char *name; /* Device name. */
+};
+
+#endif /* __LINUX_LM8323_H */
diff --git a/include/linux/i2c/ltc4245.h b/include/linux/i2c/ltc4245.h
new file mode 100644
index 00000000..56bda4be
--- /dev/null
+++ b/include/linux/i2c/ltc4245.h
@@ -0,0 +1,21 @@
+/*
+ * Platform Data for LTC4245 hardware monitor chip
+ *
+ * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef LINUX_LTC4245_H
+#define LINUX_LTC4245_H
+
+#include <linux/types.h>
+
+struct ltc4245_platform_data {
+	bool use_extra_gpios;
+};
+
+#endif /* LINUX_LTC4245_H */
diff --git a/include/linux/i2c/max6639.h b/include/linux/i2c/max6639.h
new file mode 100644
index 00000000..6011c420
--- /dev/null
+++ b/include/linux/i2c/max6639.h
@@ -0,0 +1,14 @@
+#ifndef _LINUX_MAX6639_H
+#define _LINUX_MAX6639_H
+
+#include <linux/types.h>
+
+/* platform data for the MAX6639 temperature sensor and fan control */
+
+struct max6639_platform_data {
+	bool pwm_polarity;	/* Polarity low (0) or high (1, default) */
+	int ppr;		/* Pulses per rotation 1..4 (default == 2) */
+	int rpm_range;		/* 2000, 4000 (default), 8000 or 16000 */
+};
+
+#endif /* _LINUX_MAX6639_H */
diff --git a/include/linux/i2c/max732x.h b/include/linux/i2c/max732x.h
new file mode 100644
index 00000000..c04bac8b
--- /dev/null
+++ b/include/linux/i2c/max732x.h
@@ -0,0 +1,22 @@
+#ifndef __LINUX_I2C_MAX732X_H
+#define __LINUX_I2C_MAX732X_H
+
+/* platform data for the MAX732x 8/16-bit I/O expander driver */
+
+struct max732x_platform_data {
+	/* number of the first GPIO */
+	unsigned	gpio_base;
+
+	/* interrupt base */
+	int		irq_base;
+
+	void		*context;	/* param to setup/teardown */
+
+	int		(*setup)(struct i2c_client *client,
+				unsigned gpio, unsigned ngpio,
+				void *context);
+	int		(*teardown)(struct i2c_client *client,
+				unsigned gpio, unsigned ngpio,
+				void *context);
+};
+#endif /* __LINUX_I2C_MAX732X_H */
diff --git a/include/linux/i2c/mcs.h b/include/linux/i2c/mcs.h
new file mode 100644
index 00000000..61bb18a4
--- /dev/null
+++ b/include/linux/i2c/mcs.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2009 - 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __LINUX_MCS_H
+#define __LINUX_MCS_H
+
+#define MCS_KEY_MAP(v, c)	((((v) & 0xff) << 16) | ((c) & 0xffff))
+#define MCS_KEY_VAL(v)		(((v) >> 16) & 0xff)
+#define MCS_KEY_CODE(v)		((v) & 0xffff)
+
+struct mcs_platform_data {
+	void (*poweron)(bool);
+	void (*cfg_pin)(void);
+
+	/* touchscreen */
+	unsigned int x_size;
+	unsigned int y_size;
+
+	/* touchkey */
+	const u32 *keymap;
+	unsigned int keymap_size;
+	unsigned int key_maxval;
+	bool no_autorepeat;
+};
+
+#endif	/* __LINUX_MCS_H */
diff --git a/include/linux/i2c/mpr121_touchkey.h b/include/linux/i2c/mpr121_touchkey.h
new file mode 100644
index 00000000..f0bcc38b
--- /dev/null
+++ b/include/linux/i2c/mpr121_touchkey.h
@@ -0,0 +1,20 @@
+/* Header file for Freescale MPR121 Capacitive Touch Sensor */
+
+#ifndef _MPR121_TOUCHKEY_H
+#define _MPR121_TOUCHKEY_H
+
+/**
+ * struct mpr121_platform_data - platform data for mpr121 sensor
+ * @keymap: pointer to array of KEY_* values representing keymap
+ * @keymap_size: size of the keymap
+ * @wakeup: configure the button as a wake-up source
+ * @vdd_uv: VDD voltage in uV
+ */
+struct mpr121_platform_data {
+	const unsigned short *keymap;
+	unsigned int keymap_size;
+	bool wakeup;
+	int vdd_uv;
+};
+
+#endif /* _MPR121_TOUCHKEY_H */
diff --git a/include/linux/i2c/pca953x.h b/include/linux/i2c/pca953x.h
new file mode 100644
index 00000000..139ba526
--- /dev/null
+++ b/include/linux/i2c/pca953x.h
@@ -0,0 +1,30 @@
+#ifndef _LINUX_PCA953X_H
+#define _LINUX_PCA953X_H
+
+#include <linux/types.h>
+#include <linux/i2c.h>
+
+/* platform data for the PCA9539 16-bit I/O expander driver */
+
+struct pca953x_platform_data {
+	/* number of the first GPIO */
+	unsigned	gpio_base;
+
+	/* initial polarity inversion setting */
+	uint16_t	invert;
+
+	/* interrupt base */
+	int		irq_base;
+
+	void		*context;	/* param to setup/teardown */
+
+	int		(*setup)(struct i2c_client *client,
+				unsigned gpio, unsigned ngpio,
+				void *context);
+	int		(*teardown)(struct i2c_client *client,
+				unsigned gpio, unsigned ngpio,
+				void *context);
+	const char	*const *names;
+};
+
+#endif /* _LINUX_PCA953X_H */
diff --git a/include/linux/i2c/pca954x.h b/include/linux/i2c/pca954x.h
new file mode 100644
index 00000000..28f1f8d5
--- /dev/null
+++ b/include/linux/i2c/pca954x.h
@@ -0,0 +1,47 @@
+/*
+ *
+ * pca954x.h - I2C multiplexer/switch support
+ *
+ * Copyright (c) 2008-2009 Rodolfo Giometti <giometti@linux.it>
+ * Copyright (c) 2008-2009 Eurotech S.p.A. <info@eurotech.it>
+ * Michael Lawnick <michael.lawnick.ext@nsn.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#ifndef _LINUX_I2C_PCA954X_H
+#define _LINUX_I2C_PCA954X_H
+
+/* Platform data for the PCA954x I2C multiplexers */
+
+/* Per channel initialisation data:
+ * @adap_id: bus number for the adapter. 0 = don't care
+ * @deselect_on_exit: set this entry to 1, if your H/W needs deselection
+ *                    of this channel after transaction.
+ *
+ */
+struct pca954x_platform_mode {
+	int		adap_id;
+	unsigned int	deselect_on_exit:1;
+};
+
+/* Per mux/switch data, used with i2c_register_board_info */
+struct pca954x_platform_data {
+	struct pca954x_platform_mode *modes;
+	int num_modes;
+};
+
+#endif /* _LINUX_I2C_PCA954X_H */
diff --git a/include/linux/i2c/pcf857x.h b/include/linux/i2c/pcf857x.h
new file mode 100644
index 00000000..0767a2a6
--- /dev/null
+++ b/include/linux/i2c/pcf857x.h
@@ -0,0 +1,44 @@
+#ifndef __LINUX_PCF857X_H
+#define __LINUX_PCF857X_H
+
+/**
+ * struct pcf857x_platform_data - data to set up pcf857x driver
+ * @gpio_base: number of the chip's first GPIO
+ * @n_latch: optional bit-inverse of initial register value; if
+ *	you leave this initialized to zero the driver will act
+ *	like the chip was just reset
+ * @setup: optional callback issued once the GPIOs are valid
+ * @teardown: optional callback issued before the GPIOs are invalidated
+ * @context: optional parameter passed to setup() and teardown()
+ *
+ * In addition to the I2C_BOARD_INFO() state appropriate to each chip,
+ * the i2c_board_info used with the pcf875x driver must provide its
+ * platform_data (pointer to one of these structures) with at least
+ * the gpio_base value initialized.
+ *
+ * The @setup callback may be used with the kind of board-specific glue
+ * which hands the (now-valid) GPIOs to other drivers, or which puts
+ * devices in their initial states using these GPIOs.
+ *
+ * These GPIO chips are only "quasi-bidirectional"; read the chip specs
+ * to understand the behavior.  They don't have separate registers to
+ * record which pins are used for input or output, record which output
+ * values are driven, or provide access to input values.  That must be
+ * inferred by reading the chip's value and knowing the last value written
+ * to it.  If you leave n_latch initialized to zero, that last written
+ * value is presumed to be all ones (as if the chip were just reset).
+ */
+struct pcf857x_platform_data {
+	unsigned	gpio_base;
+	unsigned	n_latch;
+
+	int		(*setup)(struct i2c_client *client,
+					int gpio, unsigned ngpio,
+					void *context);
+	int		(*teardown)(struct i2c_client *client,
+					int gpio, unsigned ngpio,
+					void *context);
+	void		*context;
+};
+
+#endif /* __LINUX_PCF857X_H */
diff --git a/include/linux/i2c/pmbus.h b/include/linux/i2c/pmbus.h
new file mode 100644
index 00000000..69280db0
--- /dev/null
+++ b/include/linux/i2c/pmbus.h
@@ -0,0 +1,45 @@
+/*
+ * Hardware monitoring driver for PMBus devices
+ *
+ * Copyright (c) 2010, 2011 Ericsson AB.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _PMBUS_H_
+#define _PMBUS_H_
+
+/* flags */
+
+/*
+ * PMBUS_SKIP_STATUS_CHECK
+ *
+ * During register detection, skip checking the status register for
+ * communication or command errors.
+ *
+ * Some PMBus chips respond with valid data when trying to read an unsupported
+ * register. For such chips, checking the status register is mandatory when
+ * trying to determine if a chip register exists or not.
+ * Other PMBus chips don't support the STATUS_CML register, or report
+ * communication errors for no explicable reason. For such chips, checking
+ * the status register must be disabled.
+ */
+#define PMBUS_SKIP_STATUS_CHECK	(1 << 0)
+
+struct pmbus_platform_data {
+	u32 flags;		/* Device specific flags */
+};
+
+#endif /* _PMBUS_H_ */
diff --git a/include/linux/i2c/pxa-i2c.h b/include/linux/i2c/pxa-i2c.h
new file mode 100644
index 00000000..1a9f65e6
--- /dev/null
+++ b/include/linux/i2c/pxa-i2c.h
@@ -0,0 +1,82 @@
+/*
+ *  i2c_pxa.h
+ *
+ *  Copyright (C) 2002 Intrinsyc Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+#ifndef _I2C_PXA_H_
+#define _I2C_PXA_H_
+
+#if 0
+#define DEF_TIMEOUT             3
+#else
+/* need a longer timeout if we're dealing with the fact we may well be
+ * looking at a multi-master environment
+*/
+#define DEF_TIMEOUT             32
+#endif
+
+#define BUS_ERROR               (-EREMOTEIO)
+#define XFER_NAKED              (-ECONNREFUSED)
+#define I2C_RETRY               (-2000) /* an error has occurred retry transmit */
+
+/* ICR initialize bit values
+*
+*  15. FM       0 (100 Khz operation)
+*  14. UR       0 (No unit reset)
+*  13. SADIE    0 (Disables the unit from interrupting on slave addresses
+*                                       matching its slave address)
+*  12. ALDIE    0 (Disables the unit from interrupt when it loses arbitration
+*                                       in master mode)
+*  11. SSDIE    0 (Disables interrupts from a slave stop detected, in slave mode)
+*  10. BEIE     1 (Enable interrupts from detected bus errors, no ACK sent)
+*  9.  IRFIE    1 (Enable interrupts from full buffer received)
+*  8.  ITEIE    1 (Enables the I2C unit to interrupt when transmit buffer empty)
+*  7.  GCD      1 (Disables i2c unit response to general call messages as a slave)
+*  6.  IUE      0 (Disable unit until we change settings)
+*  5.  SCLE     1 (Enables the i2c clock output for master mode (drives SCL)
+*  4.  MA       0 (Only send stop with the ICR stop bit)
+*  3.  TB       0 (We are not transmitting a byte initially)
+*  2.  ACKNAK   0 (Send an ACK after the unit receives a byte)
+*  1.  STOP     0 (Do not send a STOP)
+*  0.  START    0 (Do not send a START)
+*
+*/
+#define I2C_ICR_INIT	(ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
+
+/* I2C status register init values
+ *
+ * 10. BED      1 (Clear bus error detected)
+ * 9.  SAD      1 (Clear slave address detected)
+ * 7.  IRF      1 (Clear IDBR Receive Full)
+ * 6.  ITE      1 (Clear IDBR Transmit Empty)
+ * 5.  ALD      1 (Clear Arbitration Loss Detected)
+ * 4.  SSD      1 (Clear Slave Stop Detected)
+ */
+#define I2C_ISR_INIT	0x7FF  /* status register init */
+
+struct i2c_slave_client;
+
+struct i2c_pxa_platform_data {
+	unsigned int		slave_addr;
+	struct i2c_slave_client	*slave;
+	unsigned int		class;
+	unsigned int		use_pio :1;
+	unsigned int		fast_mode :1;
+};
+
+extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info);
+
+#ifdef CONFIG_PXA27x
+extern void pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info);
+#endif
+
+#ifdef CONFIG_PXA3xx
+extern void pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info);
+#endif
+
+#endif
diff --git a/include/linux/i2c/s6000.h b/include/linux/i2c/s6000.h
new file mode 100644
index 00000000..d9b34bfd
--- /dev/null
+++ b/include/linux/i2c/s6000.h
@@ -0,0 +1,10 @@
+#ifndef __LINUX_I2C_S6000_H
+#define __LINUX_I2C_S6000_H
+
+struct s6_i2c_platform_data {
+	const char *clock; /* the clock to use */
+	int bus_num; /* the bus number to register */
+};
+
+#endif
+
diff --git a/include/linux/i2c/sx150x.h b/include/linux/i2c/sx150x.h
new file mode 100644
index 00000000..52baa79d
--- /dev/null
+++ b/include/linux/i2c/sx150x.h
@@ -0,0 +1,82 @@
+/*
+ * Driver for the Semtech SX150x I2C GPIO Expanders
+ *
+ * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#ifndef __LINUX_I2C_SX150X_H
+#define __LINUX_I2C_SX150X_H
+
+/**
+ * struct sx150x_platform_data - config data for SX150x driver
+ * @gpio_base: The index number of the first GPIO assigned to this
+ *             GPIO expander.  The expander will create a block of
+ *             consecutively numbered gpios beginning at the given base,
+ *             with the size of the block depending on the model of the
+ *             expander chip.
+ * @oscio_is_gpo: If set to true, the driver will configure OSCIO as a GPO
+ *                instead of as an oscillator, increasing the size of the
+ *                GP(I)O pool created by this expander by one.  The
+ *                output-only GPO pin will be added at the end of the block.
+ * @io_pullup_ena: A bit-mask which enables or disables the pull-up resistor
+ *                 for each IO line in the expander.  Setting the bit at
+ *                 position n will enable the pull-up for the IO at
+ *                 the corresponding offset.  For chips with fewer than
+ *                 16 IO pins, high-end bits are ignored.
+ * @io_pulldn_ena: A bit-mask which enables-or disables the pull-down
+ *                 resistor for each IO line in the expander. Setting the
+ *                 bit at position n will enable the pull-down for the IO at
+ *                 the corresponding offset.  For chips with fewer than
+ *                 16 IO pins, high-end bits are ignored.
+ * @io_open_drain_ena: A bit-mask which enables-or disables open-drain
+ *                     operation for each IO line in the expander. Setting the
+ *                     bit at position n enables open-drain operation for
+ *                     the IO at the corresponding offset.  Clearing the bit
+ *                     enables regular push-pull operation for that IO.
+ *                     For chips with fewer than 16 IO pins, high-end bits
+ *                     are ignored.
+ * @io_polarity: A bit-mask which enables polarity inversion for each IO line
+ *               in the expander.  Setting the bit at position n inverts
+ *               the polarity of that IO line, while clearing it results
+ *               in normal polarity. For chips with fewer than 16 IO pins,
+ *               high-end bits are ignored.
+ * @irq_summary: The 'summary IRQ' line to which the GPIO expander's INT line
+ *               is connected, via which it reports interrupt events
+ *               across all GPIO lines.  This must be a real,
+ *               pre-existing IRQ line.
+ *               Setting this value < 0 disables the irq_chip functionality
+ *               of the driver.
+ * @irq_base: The first 'virtual IRQ' line at which our block of GPIO-based
+ *            IRQ lines will appear.  Similarly to gpio_base, the expander
+ *            will create a block of irqs beginning at this number.
+ *            This value is ignored if irq_summary is < 0.
+ * @reset_during_probe: If set to true, the driver will trigger a full
+ *                      reset of the chip at the beginning of the probe
+ *                      in order to place it in a known state.
+ */
+struct sx150x_platform_data {
+	unsigned gpio_base;
+	bool     oscio_is_gpo;
+	u16      io_pullup_ena;
+	u16      io_pulldn_ena;
+	u16      io_open_drain_ena;
+	u16      io_polarity;
+	int      irq_summary;
+	unsigned irq_base;
+	bool     reset_during_probe;
+};
+
+#endif /* __LINUX_I2C_SX150X_H */
diff --git a/include/linux/i2c/tc35876x.h b/include/linux/i2c/tc35876x.h
new file mode 100644
index 00000000..cd6a51c7
--- /dev/null
+++ b/include/linux/i2c/tc35876x.h
@@ -0,0 +1,11 @@
+
+#ifndef _TC35876X_H
+#define _TC35876X_H
+
+struct tc35876x_platform_data {
+	int gpio_bridge_reset;
+	int gpio_panel_bl_en;
+	int gpio_panel_vadd;
+};
+
+#endif /* _TC35876X_H */
diff --git a/include/linux/i2c/tps65010.h b/include/linux/i2c/tps65010.h
new file mode 100644
index 00000000..08aa9227
--- /dev/null
+++ b/include/linux/i2c/tps65010.h
@@ -0,0 +1,205 @@
+/* linux/i2c/tps65010.h
+ *
+ * Functions to access TPS65010 power management device.
+ *
+ * Copyright (C) 2004 Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_I2C_TPS65010_H
+#define __LINUX_I2C_TPS65010_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Registers, all 8 bits
+ * ----------------------------------------------------------------------------
+ */
+
+#define	TPS_CHGSTATUS		0x01
+#	define	TPS_CHG_USB		(1 << 7)
+#	define	TPS_CHG_AC		(1 << 6)
+#	define	TPS_CHG_THERM		(1 << 5)
+#	define	TPS_CHG_TERM		(1 << 4)
+#	define	TPS_CHG_TAPER_TMO	(1 << 3)
+#	define	TPS_CHG_CHG_TMO		(1 << 2)
+#	define	TPS_CHG_PRECHG_TMO	(1 << 1)
+#	define	TPS_CHG_TEMP_ERR	(1 << 0)
+#define	TPS_REGSTATUS		0x02
+#	define	TPS_REG_ONOFF		(1 << 7)
+#	define	TPS_REG_COVER		(1 << 6)
+#	define	TPS_REG_UVLO		(1 << 5)
+#	define	TPS_REG_NO_CHG		(1 << 4)	/* tps65013 */
+#	define	TPS_REG_PG_LD02		(1 << 3)
+#	define	TPS_REG_PG_LD01		(1 << 2)
+#	define	TPS_REG_PG_MAIN		(1 << 1)
+#	define	TPS_REG_PG_CORE		(1 << 0)
+#define	TPS_MASK1		0x03
+#define	TPS_MASK2		0x04
+#define	TPS_ACKINT1		0x05
+#define	TPS_ACKINT2		0x06
+#define	TPS_CHGCONFIG		0x07
+#	define	TPS_CHARGE_POR		(1 << 7)	/* 65010/65012 */
+#	define	TPS65013_AUA		(1 << 7)	/* 65011/65013 */
+#	define	TPS_CHARGE_RESET	(1 << 6)
+#	define	TPS_CHARGE_FAST		(1 << 5)
+#	define	TPS_CHARGE_CURRENT	(3 << 3)
+#	define	TPS_VBUS_500MA		(1 << 2)
+#	define	TPS_VBUS_CHARGING	(1 << 1)
+#	define	TPS_CHARGE_ENABLE	(1 << 0)
+#define	TPS_LED1_ON		0x08
+#define	TPS_LED1_PER		0x09
+#define	TPS_LED2_ON		0x0a
+#define	TPS_LED2_PER		0x0b
+#define	TPS_VDCDC1		0x0c
+#	define	TPS_ENABLE_LP		(1 << 3)
+#define	TPS_VDCDC2		0x0d
+#	define	TPS_LP_COREOFF	(1 << 7)
+#	define 	TPS_VCORE_1_8V	(7<<4)
+#	define 	TPS_VCORE_1_5V	(6 << 4)
+#	define 	TPS_VCORE_1_4V	(5 << 4)
+#	define 	TPS_VCORE_1_3V	(4 << 4)
+#	define 	TPS_VCORE_1_2V	(3 << 4)
+#	define 	TPS_VCORE_1_1V	(2 << 4)
+#	define 	TPS_VCORE_1_0V	(1 << 4)
+#	define 	TPS_VCORE_0_85V	(0 << 4)
+#	define	TPS_VCORE_LP_1_2V (3 << 2)
+#	define	TPS_VCORE_LP_1_1V (2 << 2)
+#	define	TPS_VCORE_LP_1_0V (1 << 2)
+#	define	TPS_VCORE_LP_0_85V (0 << 2)
+#	define	TPS_VIB		(1 << 1)
+#	define	TPS_VCORE_DISCH	(1 << 0)
+#define	TPS_VREGS1		0x0e
+#	define	TPS_LDO2_ENABLE	(1 << 7)
+#	define	TPS_LDO2_OFF	(1 << 6)
+#	define	TPS_VLDO2_3_0V	(3 << 4)
+#	define	TPS_VLDO2_2_75V	(2 << 4)
+#	define	TPS_VLDO2_2_5V	(1 << 4)
+#	define	TPS_VLDO2_1_8V	(0 << 4)
+#	define	TPS_LDO1_ENABLE	(1 << 3)
+#	define	TPS_LDO1_OFF	(1 << 2)
+#	define	TPS_VLDO1_3_0V	(3 << 0)
+#	define	TPS_VLDO1_2_75V	(2 << 0)
+#	define	TPS_VLDO1_2_5V	(1 << 0)
+#	define	TPS_VLDO1_ADJ	(0 << 0)
+#define	TPS_MASK3		0x0f
+#define	TPS_DEFGPIO		0x10
+
+/*
+ * ----------------------------------------------------------------------------
+ * Macros used by exported functions
+ * ----------------------------------------------------------------------------
+ */
+
+#define LED1  1
+#define LED2  2
+#define OFF   0
+#define ON    1
+#define BLINK 2
+#define GPIO1 1
+#define GPIO2 2
+#define GPIO3 3
+#define GPIO4 4
+#define LOW   0
+#define HIGH  1
+
+/*
+ * ----------------------------------------------------------------------------
+ * Exported functions
+ * ----------------------------------------------------------------------------
+ */
+
+/* Draw from VBUS:
+ *   0 mA -- DON'T DRAW (might supply power instead)
+ * 100 mA -- usb unit load (slowest charge rate)
+ * 500 mA -- usb high power (fast battery charge)
+ */
+extern int tps65010_set_vbus_draw(unsigned mA);
+
+/* tps65010_set_gpio_out_value parameter:
+ * gpio:  GPIO1, GPIO2, GPIO3 or GPIO4
+ * value: LOW or HIGH
+ */
+extern int tps65010_set_gpio_out_value(unsigned gpio, unsigned value);
+
+/* tps65010_set_led parameter:
+ * led:  LED1 or LED2
+ * mode: ON, OFF or BLINK
+ */
+extern int tps65010_set_led(unsigned led, unsigned mode);
+
+/* tps65010_set_vib parameter:
+ * value: ON or OFF
+ */
+extern int tps65010_set_vib(unsigned value);
+
+/* tps65010_set_low_pwr parameter:
+ * mode: ON or OFF
+ */
+extern int tps65010_set_low_pwr(unsigned mode);
+
+/* tps65010_config_vregs1 parameter:
+ * value to be written to VREGS1 register
+ * Note: The complete register is written, set all bits you need
+ */
+extern int tps65010_config_vregs1(unsigned value);
+
+/* tps65013_set_low_pwr parameter:
+ * mode: ON or OFF
+ */
+extern int tps65013_set_low_pwr(unsigned mode);
+
+/* tps65010_set_vdcdc2
+ *  value to be written to VDCDC2
+ */
+extern int tps65010_config_vdcdc2(unsigned value);
+
+struct i2c_client;
+
+/**
+ * struct tps65010_board - packages GPIO and LED lines
+ * @base: the GPIO number to assign to GPIO-1
+ * @outmask: bit (N-1) is set to allow GPIO-N to be used as an
+ *	(open drain) output
+ * @setup: optional callback issued once the GPIOs are valid
+ * @teardown: optional callback issued before the GPIOs are invalidated
+ * @context: optional parameter passed to setup() and teardown()
+ *
+ * Board data may be used to package the GPIO (and LED) lines for use
+ * in by the generic GPIO and LED frameworks.  The first four GPIOs
+ * starting at gpio_base are GPIO1..GPIO4.  The next two are LED1/nPG
+ * and LED2 (with hardware blinking capability, not currently exposed).
+ *
+ * The @setup callback may be used with the kind of board-specific glue
+ * which hands the (now-valid) GPIOs to other drivers, or which puts
+ * devices in their initial states using these GPIOs.
+ */
+struct tps65010_board {
+	int				base;
+	unsigned			outmask;
+
+	int		(*setup)(struct i2c_client *client, void *context);
+	int		(*teardown)(struct i2c_client *client, void *context);
+	void		*context;
+};
+
+#endif /*  __LINUX_I2C_TPS65010_H */
+
diff --git a/include/linux/i2c/tsc2007.h b/include/linux/i2c/tsc2007.h
new file mode 100644
index 00000000..506a9f7a
--- /dev/null
+++ b/include/linux/i2c/tsc2007.h
@@ -0,0 +1,24 @@
+#ifndef __LINUX_I2C_TSC2007_H
+#define __LINUX_I2C_TSC2007_H
+
+/* linux/i2c/tsc2007.h */
+
+struct tsc2007_platform_data {
+	u16	model;				/* 2007. */
+	u16	x_plate_ohms;	/* must be non-zero value */
+	u16	max_rt; /* max. resistance above which samples are ignored */
+	unsigned long poll_delay; /* delay (in ms) after pen-down event
+				     before polling starts */
+	unsigned long poll_period; /* time (in ms) between samples */
+	int	fuzzx; /* fuzz factor for X, Y and pressure axes */
+	int	fuzzy;
+	int	fuzzz;
+
+	int	(*get_pendown_state)(void);
+	void	(*clear_penirq)(void);		/* If needed, clear 2nd level
+						   interrupt source */
+	int	(*init_platform_hw)(void);
+	void	(*exit_platform_hw)(void);
+};
+
+#endif
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
new file mode 100644
index 00000000..1f90de0c
--- /dev/null
+++ b/include/linux/i2c/twl.h
@@ -0,0 +1,846 @@
+/*
+ * twl4030.h - header for TWL4030 PM and audio CODEC device
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * Based on tlv320aic23.c:
+ * Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#ifndef __TWL_H_
+#define __TWL_H_
+
+#include <linux/types.h>
+#include <linux/input/matrix_keypad.h>
+
+/*
+ * Using the twl4030 core we address registers using a pair
+ *	{ module id, relative register offset }
+ * which that core then maps to the relevant
+ *	{ i2c slave, absolute register address }
+ *
+ * The module IDs are meaningful only to the twl4030 core code,
+ * which uses them as array indices to look up the first register
+ * address each module uses within a given i2c slave.
+ */
+
+/* Slave 0 (i2c address 0x48) */
+#define TWL4030_MODULE_USB		0x00
+
+/* Slave 1 (i2c address 0x49) */
+#define TWL4030_MODULE_AUDIO_VOICE	0x01
+#define TWL4030_MODULE_GPIO		0x02
+#define TWL4030_MODULE_INTBR		0x03
+#define TWL4030_MODULE_PIH		0x04
+#define TWL4030_MODULE_TEST		0x05
+
+/* Slave 2 (i2c address 0x4a) */
+#define TWL4030_MODULE_KEYPAD		0x06
+#define TWL4030_MODULE_MADC		0x07
+#define TWL4030_MODULE_INTERRUPTS	0x08
+#define TWL4030_MODULE_LED		0x09
+#define TWL4030_MODULE_MAIN_CHARGE	0x0A
+#define TWL4030_MODULE_PRECHARGE	0x0B
+#define TWL4030_MODULE_PWM0		0x0C
+#define TWL4030_MODULE_PWM1		0x0D
+#define TWL4030_MODULE_PWMA		0x0E
+#define TWL4030_MODULE_PWMB		0x0F
+
+#define TWL5031_MODULE_ACCESSORY	0x10
+#define TWL5031_MODULE_INTERRUPTS	0x11
+
+/* Slave 3 (i2c address 0x4b) */
+#define TWL4030_MODULE_BACKUP		0x12
+#define TWL4030_MODULE_INT		0x13
+#define TWL4030_MODULE_PM_MASTER	0x14
+#define TWL4030_MODULE_PM_RECEIVER	0x15
+#define TWL4030_MODULE_RTC		0x16
+#define TWL4030_MODULE_SECURED_REG	0x17
+
+#define TWL_MODULE_USB		TWL4030_MODULE_USB
+#define TWL_MODULE_AUDIO_VOICE	TWL4030_MODULE_AUDIO_VOICE
+#define TWL_MODULE_PIH		TWL4030_MODULE_PIH
+#define TWL_MODULE_MADC		TWL4030_MODULE_MADC
+#define TWL_MODULE_MAIN_CHARGE	TWL4030_MODULE_MAIN_CHARGE
+#define TWL_MODULE_PM_MASTER	TWL4030_MODULE_PM_MASTER
+#define TWL_MODULE_PM_RECEIVER	TWL4030_MODULE_PM_RECEIVER
+#define TWL_MODULE_RTC		TWL4030_MODULE_RTC
+#define TWL_MODULE_PWM		TWL4030_MODULE_PWM0
+
+#define TWL6030_MODULE_ID0	0x0D
+#define TWL6030_MODULE_ID1	0x0E
+#define TWL6030_MODULE_ID2	0x0F
+
+#define GPIO_INTR_OFFSET	0
+#define KEYPAD_INTR_OFFSET	1
+#define BCI_INTR_OFFSET		2
+#define MADC_INTR_OFFSET	3
+#define USB_INTR_OFFSET		4
+#define CHARGERFAULT_INTR_OFFSET 5
+#define BCI_PRES_INTR_OFFSET	9
+#define USB_PRES_INTR_OFFSET	10
+#define RTC_INTR_OFFSET		11
+
+/*
+ * Offset from TWL6030_IRQ_BASE / pdata->irq_base
+ */
+#define PWR_INTR_OFFSET		0
+#define HOTDIE_INTR_OFFSET	12
+#define SMPSLDO_INTR_OFFSET	13
+#define BATDETECT_INTR_OFFSET	14
+#define SIMDETECT_INTR_OFFSET	15
+#define MMCDETECT_INTR_OFFSET	16
+#define GASGAUGE_INTR_OFFSET	17
+#define USBOTG_INTR_OFFSET	4
+#define CHARGER_INTR_OFFSET	2
+#define RSV_INTR_OFFSET		0
+
+/* INT register offsets */
+#define REG_INT_STS_A			0x00
+#define REG_INT_STS_B			0x01
+#define REG_INT_STS_C			0x02
+
+#define REG_INT_MSK_LINE_A		0x03
+#define REG_INT_MSK_LINE_B		0x04
+#define REG_INT_MSK_LINE_C		0x05
+
+#define REG_INT_MSK_STS_A		0x06
+#define REG_INT_MSK_STS_B		0x07
+#define REG_INT_MSK_STS_C		0x08
+
+/* MASK INT REG GROUP A */
+#define TWL6030_PWR_INT_MASK 		0x07
+#define TWL6030_RTC_INT_MASK 		0x18
+#define TWL6030_HOTDIE_INT_MASK 	0x20
+#define TWL6030_SMPSLDOA_INT_MASK	0xC0
+
+/* MASK INT REG GROUP B */
+#define TWL6030_SMPSLDOB_INT_MASK 	0x01
+#define TWL6030_BATDETECT_INT_MASK 	0x02
+#define TWL6030_SIMDETECT_INT_MASK 	0x04
+#define TWL6030_MMCDETECT_INT_MASK 	0x08
+#define TWL6030_GPADC_INT_MASK 		0x60
+#define TWL6030_GASGAUGE_INT_MASK 	0x80
+
+/* MASK INT REG GROUP C */
+#define TWL6030_USBOTG_INT_MASK  	0x0F
+#define TWL6030_CHARGER_CTRL_INT_MASK 	0x10
+#define TWL6030_CHARGER_FAULT_INT_MASK 	0x60
+
+#define TWL6030_MMCCTRL		0xEE
+#define VMMC_AUTO_OFF			(0x1 << 3)
+#define SW_FC				(0x1 << 2)
+#define STS_MMC			0x1
+
+#define TWL6030_CFG_INPUT_PUPD3	0xF2
+#define MMC_PU				(0x1 << 3)
+#define MMC_PD				(0x1 << 2)
+
+#define TWL_SIL_TYPE(rev)		((rev) & 0x00FFFFFF)
+#define TWL_SIL_REV(rev)		((rev) >> 24)
+#define TWL_SIL_5030			0x09002F
+#define TWL5030_REV_1_0			0x00
+#define TWL5030_REV_1_1			0x10
+#define TWL5030_REV_1_2			0x30
+
+#define TWL4030_CLASS_ID 		0x4030
+#define TWL6030_CLASS_ID 		0x6030
+unsigned int twl_rev(void);
+#define GET_TWL_REV (twl_rev())
+#define TWL_CLASS_IS(class, id)			\
+static inline int twl_class_is_ ##class(void)	\
+{						\
+	return ((id) == (GET_TWL_REV)) ? 1 : 0;	\
+}
+
+TWL_CLASS_IS(4030, TWL4030_CLASS_ID)
+TWL_CLASS_IS(6030, TWL6030_CLASS_ID)
+
+#define TWL6025_SUBCLASS	BIT(4)  /* TWL6025 has changed registers */
+
+/*
+ * Read and write single 8-bit registers
+ */
+int twl_i2c_write_u8(u8 mod_no, u8 val, u8 reg);
+int twl_i2c_read_u8(u8 mod_no, u8 *val, u8 reg);
+
+/*
+ * Read and write several 8-bit registers at once.
+ *
+ * IMPORTANT:  For twl_i2c_write(), allocate num_bytes + 1
+ * for the value, and populate your data starting at offset 1.
+ */
+int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
+int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
+
+int twl_get_type(void);
+int twl_get_version(void);
+
+int twl6030_interrupt_unmask(u8 bit_mask, u8 offset);
+int twl6030_interrupt_mask(u8 bit_mask, u8 offset);
+
+/* Card detect Configuration for MMC1 Controller on OMAP4 */
+#ifdef CONFIG_TWL4030_CORE
+int twl6030_mmc_card_detect_config(void);
+#else
+static inline int twl6030_mmc_card_detect_config(void)
+{
+	pr_debug("twl6030_mmc_card_detect_config not supported\n");
+	return 0;
+}
+#endif
+
+/* MMC1 Controller on OMAP4 uses Phoenix irq for Card detect */
+#ifdef CONFIG_TWL4030_CORE
+int twl6030_mmc_card_detect(struct device *dev, int slot);
+#else
+static inline int twl6030_mmc_card_detect(struct device *dev, int slot)
+{
+	pr_debug("Call back twl6030_mmc_card_detect not supported\n");
+	return -EIO;
+}
+#endif
+/*----------------------------------------------------------------------*/
+
+/*
+ * NOTE:  at up to 1024 registers, this is a big chip.
+ *
+ * Avoid putting register declarations in this file, instead of into
+ * a driver-private file, unless some of the registers in a block
+ * need to be shared with other drivers.  One example is blocks that
+ * have Secondary IRQ Handler (SIH) registers.
+ */
+
+#define TWL4030_SIH_CTRL_EXCLEN_MASK	BIT(0)
+#define TWL4030_SIH_CTRL_PENDDIS_MASK	BIT(1)
+#define TWL4030_SIH_CTRL_COR_MASK	BIT(2)
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * GPIO Block Register offsets (use TWL4030_MODULE_GPIO)
+ */
+
+#define REG_GPIODATAIN1			0x0
+#define REG_GPIODATAIN2			0x1
+#define REG_GPIODATAIN3			0x2
+#define REG_GPIODATADIR1		0x3
+#define REG_GPIODATADIR2		0x4
+#define REG_GPIODATADIR3		0x5
+#define REG_GPIODATAOUT1		0x6
+#define REG_GPIODATAOUT2		0x7
+#define REG_GPIODATAOUT3		0x8
+#define REG_CLEARGPIODATAOUT1		0x9
+#define REG_CLEARGPIODATAOUT2		0xA
+#define REG_CLEARGPIODATAOUT3		0xB
+#define REG_SETGPIODATAOUT1		0xC
+#define REG_SETGPIODATAOUT2		0xD
+#define REG_SETGPIODATAOUT3		0xE
+#define REG_GPIO_DEBEN1			0xF
+#define REG_GPIO_DEBEN2			0x10
+#define REG_GPIO_DEBEN3			0x11
+#define REG_GPIO_CTRL			0x12
+#define REG_GPIOPUPDCTR1		0x13
+#define REG_GPIOPUPDCTR2		0x14
+#define REG_GPIOPUPDCTR3		0x15
+#define REG_GPIOPUPDCTR4		0x16
+#define REG_GPIOPUPDCTR5		0x17
+#define REG_GPIO_ISR1A			0x19
+#define REG_GPIO_ISR2A			0x1A
+#define REG_GPIO_ISR3A			0x1B
+#define REG_GPIO_IMR1A			0x1C
+#define REG_GPIO_IMR2A			0x1D
+#define REG_GPIO_IMR3A			0x1E
+#define REG_GPIO_ISR1B			0x1F
+#define REG_GPIO_ISR2B			0x20
+#define REG_GPIO_ISR3B			0x21
+#define REG_GPIO_IMR1B			0x22
+#define REG_GPIO_IMR2B			0x23
+#define REG_GPIO_IMR3B			0x24
+#define REG_GPIO_EDR1			0x28
+#define REG_GPIO_EDR2			0x29
+#define REG_GPIO_EDR3			0x2A
+#define REG_GPIO_EDR4			0x2B
+#define REG_GPIO_EDR5			0x2C
+#define REG_GPIO_SIH_CTRL		0x2D
+
+/* Up to 18 signals are available as GPIOs, when their
+ * pins are not assigned to another use (such as ULPI/USB).
+ */
+#define TWL4030_GPIO_MAX		18
+
+/*----------------------------------------------------------------------*/
+
+/*Interface Bit Register (INTBR) offsets
+ *(Use TWL_4030_MODULE_INTBR)
+ */
+
+#define REG_IDCODE_7_0			0x00
+#define REG_IDCODE_15_8			0x01
+#define REG_IDCODE_16_23		0x02
+#define REG_IDCODE_31_24		0x03
+#define REG_GPPUPDCTR1			0x0F
+#define REG_UNLOCK_TEST_REG		0x12
+
+/*I2C1 and I2C4(SR) SDA/SCL pull-up control bits */
+
+#define I2C_SCL_CTRL_PU			BIT(0)
+#define I2C_SDA_CTRL_PU			BIT(2)
+#define SR_I2C_SCL_CTRL_PU		BIT(4)
+#define SR_I2C_SDA_CTRL_PU		BIT(6)
+
+#define TWL_EEPROM_R_UNLOCK		0x49
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Keypad register offsets (use TWL4030_MODULE_KEYPAD)
+ * ... SIH/interrupt only
+ */
+
+#define TWL4030_KEYPAD_KEYP_ISR1	0x11
+#define TWL4030_KEYPAD_KEYP_IMR1	0x12
+#define TWL4030_KEYPAD_KEYP_ISR2	0x13
+#define TWL4030_KEYPAD_KEYP_IMR2	0x14
+#define TWL4030_KEYPAD_KEYP_SIR		0x15	/* test register */
+#define TWL4030_KEYPAD_KEYP_EDR		0x16
+#define TWL4030_KEYPAD_KEYP_SIH_CTRL	0x17
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Multichannel ADC register offsets (use TWL4030_MODULE_MADC)
+ * ... SIH/interrupt only
+ */
+
+#define TWL4030_MADC_ISR1		0x61
+#define TWL4030_MADC_IMR1		0x62
+#define TWL4030_MADC_ISR2		0x63
+#define TWL4030_MADC_IMR2		0x64
+#define TWL4030_MADC_SIR		0x65	/* test register */
+#define TWL4030_MADC_EDR		0x66
+#define TWL4030_MADC_SIH_CTRL		0x67
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Battery charger register offsets (use TWL4030_MODULE_INTERRUPTS)
+ */
+
+#define TWL4030_INTERRUPTS_BCIISR1A	0x0
+#define TWL4030_INTERRUPTS_BCIISR2A	0x1
+#define TWL4030_INTERRUPTS_BCIIMR1A	0x2
+#define TWL4030_INTERRUPTS_BCIIMR2A	0x3
+#define TWL4030_INTERRUPTS_BCIISR1B	0x4
+#define TWL4030_INTERRUPTS_BCIISR2B	0x5
+#define TWL4030_INTERRUPTS_BCIIMR1B	0x6
+#define TWL4030_INTERRUPTS_BCIIMR2B	0x7
+#define TWL4030_INTERRUPTS_BCISIR1	0x8	/* test register */
+#define TWL4030_INTERRUPTS_BCISIR2	0x9	/* test register */
+#define TWL4030_INTERRUPTS_BCIEDR1	0xa
+#define TWL4030_INTERRUPTS_BCIEDR2	0xb
+#define TWL4030_INTERRUPTS_BCIEDR3	0xc
+#define TWL4030_INTERRUPTS_BCISIHCTRL	0xd
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Power Interrupt block register offsets (use TWL4030_MODULE_INT)
+ */
+
+#define TWL4030_INT_PWR_ISR1		0x0
+#define TWL4030_INT_PWR_IMR1		0x1
+#define TWL4030_INT_PWR_ISR2		0x2
+#define TWL4030_INT_PWR_IMR2		0x3
+#define TWL4030_INT_PWR_SIR		0x4	/* test register */
+#define TWL4030_INT_PWR_EDR1		0x5
+#define TWL4030_INT_PWR_EDR2		0x6
+#define TWL4030_INT_PWR_SIH_CTRL	0x7
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Accessory Interrupts
+ */
+#define TWL5031_ACIIMR_LSB		0x05
+#define TWL5031_ACIIMR_MSB		0x06
+#define TWL5031_ACIIDR_LSB		0x07
+#define TWL5031_ACIIDR_MSB		0x08
+#define TWL5031_ACCISR1			0x0F
+#define TWL5031_ACCIMR1			0x10
+#define TWL5031_ACCISR2			0x11
+#define TWL5031_ACCIMR2			0x12
+#define TWL5031_ACCSIR			0x13
+#define TWL5031_ACCEDR1			0x14
+#define TWL5031_ACCSIHCTRL		0x15
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Battery Charger Controller
+ */
+
+#define TWL5031_INTERRUPTS_BCIISR1	0x0
+#define TWL5031_INTERRUPTS_BCIIMR1	0x1
+#define TWL5031_INTERRUPTS_BCIISR2	0x2
+#define TWL5031_INTERRUPTS_BCIIMR2	0x3
+#define TWL5031_INTERRUPTS_BCISIR	0x4
+#define TWL5031_INTERRUPTS_BCIEDR1	0x5
+#define TWL5031_INTERRUPTS_BCIEDR2	0x6
+#define TWL5031_INTERRUPTS_BCISIHCTRL	0x7
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * PM Master module register offsets (use TWL4030_MODULE_PM_MASTER)
+ */
+
+#define TWL4030_PM_MASTER_CFG_P1_TRANSITION	0x00
+#define TWL4030_PM_MASTER_CFG_P2_TRANSITION	0x01
+#define TWL4030_PM_MASTER_CFG_P3_TRANSITION	0x02
+#define TWL4030_PM_MASTER_CFG_P123_TRANSITION	0x03
+#define TWL4030_PM_MASTER_STS_BOOT		0x04
+#define TWL4030_PM_MASTER_CFG_BOOT		0x05
+#define TWL4030_PM_MASTER_SHUNDAN		0x06
+#define TWL4030_PM_MASTER_BOOT_BCI		0x07
+#define TWL4030_PM_MASTER_CFG_PWRANA1		0x08
+#define TWL4030_PM_MASTER_CFG_PWRANA2		0x09
+#define TWL4030_PM_MASTER_BACKUP_MISC_STS	0x0b
+#define TWL4030_PM_MASTER_BACKUP_MISC_CFG	0x0c
+#define TWL4030_PM_MASTER_BACKUP_MISC_TST	0x0d
+#define TWL4030_PM_MASTER_PROTECT_KEY		0x0e
+#define TWL4030_PM_MASTER_STS_HW_CONDITIONS	0x0f
+#define TWL4030_PM_MASTER_P1_SW_EVENTS		0x10
+#define TWL4030_PM_MASTER_P2_SW_EVENTS		0x11
+#define TWL4030_PM_MASTER_P3_SW_EVENTS		0x12
+#define TWL4030_PM_MASTER_STS_P123_STATE	0x13
+#define TWL4030_PM_MASTER_PB_CFG		0x14
+#define TWL4030_PM_MASTER_PB_WORD_MSB		0x15
+#define TWL4030_PM_MASTER_PB_WORD_LSB		0x16
+#define TWL4030_PM_MASTER_SEQ_ADD_W2P		0x1c
+#define TWL4030_PM_MASTER_SEQ_ADD_P2A		0x1d
+#define TWL4030_PM_MASTER_SEQ_ADD_A2W		0x1e
+#define TWL4030_PM_MASTER_SEQ_ADD_A2S		0x1f
+#define TWL4030_PM_MASTER_SEQ_ADD_S2A12		0x20
+#define TWL4030_PM_MASTER_SEQ_ADD_S2A3		0x21
+#define TWL4030_PM_MASTER_SEQ_ADD_WARM		0x22
+#define TWL4030_PM_MASTER_MEMORY_ADDRESS	0x23
+#define TWL4030_PM_MASTER_MEMORY_DATA		0x24
+
+#define TWL4030_PM_MASTER_KEY_CFG1		0xc0
+#define TWL4030_PM_MASTER_KEY_CFG2		0x0c
+
+#define TWL4030_PM_MASTER_KEY_TST1		0xe0
+#define TWL4030_PM_MASTER_KEY_TST2		0x0e
+
+#define TWL4030_PM_MASTER_GLOBAL_TST		0xb6
+
+/*----------------------------------------------------------------------*/
+
+/* Power bus message definitions */
+
+/* The TWL4030/5030 splits its power-management resources (the various
+ * regulators, clock and reset lines) into 3 processor groups - P1, P2 and
+ * P3. These groups can then be configured to transition between sleep, wait-on
+ * and active states by sending messages to the power bus.  See Section 5.4.2
+ * Power Resources of TWL4030 TRM
+ */
+
+/* Processor groups */
+#define DEV_GRP_NULL		0x0
+#define DEV_GRP_P1		0x1	/* P1: all OMAP devices */
+#define DEV_GRP_P2		0x2	/* P2: all Modem devices */
+#define DEV_GRP_P3		0x4	/* P3: all peripheral devices */
+
+/* Resource groups */
+#define RES_GRP_RES		0x0	/* Reserved */
+#define RES_GRP_PP		0x1	/* Power providers */
+#define RES_GRP_RC		0x2	/* Reset and control */
+#define RES_GRP_PP_RC		0x3
+#define RES_GRP_PR		0x4	/* Power references */
+#define RES_GRP_PP_PR		0x5
+#define RES_GRP_RC_PR		0x6
+#define RES_GRP_ALL		0x7	/* All resource groups */
+
+#define RES_TYPE2_R0		0x0
+
+#define RES_TYPE_ALL		0x7
+
+/* Resource states */
+#define RES_STATE_WRST		0xF
+#define RES_STATE_ACTIVE	0xE
+#define RES_STATE_SLEEP		0x8
+#define RES_STATE_OFF		0x0
+
+/* Power resources */
+
+/* Power providers */
+#define RES_VAUX1               1
+#define RES_VAUX2               2
+#define RES_VAUX3               3
+#define RES_VAUX4               4
+#define RES_VMMC1               5
+#define RES_VMMC2               6
+#define RES_VPLL1               7
+#define RES_VPLL2               8
+#define RES_VSIM                9
+#define RES_VDAC                10
+#define RES_VINTANA1            11
+#define RES_VINTANA2            12
+#define RES_VINTDIG             13
+#define RES_VIO                 14
+#define RES_VDD1                15
+#define RES_VDD2                16
+#define RES_VUSB_1V5            17
+#define RES_VUSB_1V8            18
+#define RES_VUSB_3V1            19
+#define RES_VUSBCP              20
+#define RES_REGEN               21
+/* Reset and control */
+#define RES_NRES_PWRON          22
+#define RES_CLKEN               23
+#define RES_SYSEN               24
+#define RES_HFCLKOUT            25
+#define RES_32KCLKOUT           26
+#define RES_RESET               27
+/* Power Reference */
+#define RES_MAIN_REF            28
+
+#define TOTAL_RESOURCES		28
+/*
+ * Power Bus Message Format ... these can be sent individually by Linux,
+ * but are usually part of downloaded scripts that are run when various
+ * power events are triggered.
+ *
+ *  Broadcast Message (16 Bits):
+ *    DEV_GRP[15:13] MT[12]  RES_GRP[11:9]  RES_TYPE2[8:7] RES_TYPE[6:4]
+ *    RES_STATE[3:0]
+ *
+ *  Singular Message (16 Bits):
+ *    DEV_GRP[15:13] MT[12]  RES_ID[11:4]  RES_STATE[3:0]
+ */
+
+#define MSG_BROADCAST(devgrp, grp, type, type2, state) \
+	( (devgrp) << 13 | 1 << 12 | (grp) << 9 | (type2) << 7 \
+	| (type) << 4 | (state))
+
+#define MSG_SINGULAR(devgrp, id, state) \
+	((devgrp) << 13 | 0 << 12 | (id) << 4 | (state))
+
+#define MSG_BROADCAST_ALL(devgrp, state) \
+	((devgrp) << 5 | (state))
+
+#define MSG_BROADCAST_REF MSG_BROADCAST_ALL
+#define MSG_BROADCAST_PROV MSG_BROADCAST_ALL
+#define MSG_BROADCAST__CLK_RST MSG_BROADCAST_ALL
+/*----------------------------------------------------------------------*/
+
+struct twl4030_clock_init_data {
+	bool ck32k_lowpwr_enable;
+};
+
+struct twl4030_bci_platform_data {
+	int *battery_tmp_tbl;
+	unsigned int tblsize;
+};
+
+/* TWL4030_GPIO_MAX (18) GPIOs, with interrupts */
+struct twl4030_gpio_platform_data {
+	int		gpio_base;
+	unsigned	irq_base, irq_end;
+
+	/* package the two LED signals as output-only GPIOs? */
+	bool		use_leds;
+
+	/* gpio-n should control VMMC(n+1) if BIT(n) in mmc_cd is set */
+	u8		mmc_cd;
+
+	/* if BIT(N) is set, or VMMC(n+1) is linked, debounce GPIO-N */
+	u32		debounce;
+
+	/* For gpio-N, bit (1 << N) in "pullups" is set if that pullup
+	 * should be enabled.  Else, if that bit is set in "pulldowns",
+	 * that pulldown is enabled.  Don't waste power by letting any
+	 * digital inputs float...
+	 */
+	u32		pullups;
+	u32		pulldowns;
+
+	int		(*setup)(struct device *dev,
+				unsigned gpio, unsigned ngpio);
+	int		(*teardown)(struct device *dev,
+				unsigned gpio, unsigned ngpio);
+};
+
+struct twl4030_madc_platform_data {
+	int		irq_line;
+};
+
+/* Boards have unique mappings of {row, col} --> keycode.
+ * Column and row are 8 bits each, but range only from 0..7.
+ * a PERSISTENT_KEY is "always on" and never reported.
+ */
+#define PERSISTENT_KEY(r, c)	KEY((r), (c), KEY_RESERVED)
+
+struct twl4030_keypad_data {
+	const struct matrix_keymap_data *keymap_data;
+	unsigned rows;
+	unsigned cols;
+	bool rep;
+};
+
+enum twl4030_usb_mode {
+	T2_USB_MODE_ULPI = 1,
+	T2_USB_MODE_CEA2011_3PIN = 2,
+};
+
+struct twl4030_usb_data {
+	enum twl4030_usb_mode	usb_mode;
+	unsigned long		features;
+
+	int		(*phy_init)(struct device *dev);
+	int		(*phy_exit)(struct device *dev);
+	/* Power on/off the PHY */
+	int		(*phy_power)(struct device *dev, int iD, int on);
+	/* enable/disable  phy clocks */
+	int		(*phy_set_clock)(struct device *dev, int on);
+	/* suspend/resume of phy */
+	int		(*phy_suspend)(struct device *dev, int suspend);
+};
+
+struct twl4030_ins {
+	u16 pmb_message;
+	u8 delay;
+};
+
+struct twl4030_script {
+	struct twl4030_ins *script;
+	unsigned size;
+	u8 flags;
+#define TWL4030_WRST_SCRIPT	(1<<0)
+#define TWL4030_WAKEUP12_SCRIPT	(1<<1)
+#define TWL4030_WAKEUP3_SCRIPT	(1<<2)
+#define TWL4030_SLEEP_SCRIPT	(1<<3)
+};
+
+struct twl4030_resconfig {
+	u8 resource;
+	u8 devgroup;	/* Processor group that Power resource belongs to */
+	u8 type;	/* Power resource addressed, 6 / broadcast message */
+	u8 type2;	/* Power resource addressed, 3 / broadcast message */
+	u8 remap_off;	/* off state remapping */
+	u8 remap_sleep;	/* sleep state remapping */
+};
+
+struct twl4030_power_data {
+	struct twl4030_script **scripts;
+	unsigned num;
+	struct twl4030_resconfig *resource_config;
+#define TWL4030_RESCONFIG_UNDEF	((u8)-1)
+	bool use_poweroff;	/* Board is wired for TWL poweroff */
+};
+
+extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts);
+extern int twl4030_remove_script(u8 flags);
+extern void twl4030_power_off(void);
+
+struct twl4030_codec_data {
+	unsigned int digimic_delay; /* in ms */
+	unsigned int ramp_delay_value;
+	unsigned int offset_cncl_path;
+	unsigned int check_defaults:1;
+	unsigned int reset_registers:1;
+	unsigned int hs_extmute:1;
+	void (*set_hs_extmute)(int mute);
+};
+
+struct twl4030_vibra_data {
+	unsigned int	coexist;
+};
+
+struct twl4030_audio_data {
+	unsigned int	audio_mclk;
+	struct twl4030_codec_data *codec;
+	struct twl4030_vibra_data *vibra;
+
+	/* twl6040 */
+	int audpwron_gpio;	/* audio power-on gpio */
+	int naudint_irq;	/* audio interrupt */
+	unsigned int irq_base;
+};
+
+struct twl4030_platform_data {
+	unsigned				irq_base, irq_end;
+	struct twl4030_clock_init_data		*clock;
+	struct twl4030_bci_platform_data	*bci;
+	struct twl4030_gpio_platform_data	*gpio;
+	struct twl4030_madc_platform_data	*madc;
+	struct twl4030_keypad_data		*keypad;
+	struct twl4030_usb_data			*usb;
+	struct twl4030_power_data		*power;
+	struct twl4030_audio_data		*audio;
+
+	/* Common LDO regulators for TWL4030/TWL6030 */
+	struct regulator_init_data		*vdac;
+	struct regulator_init_data		*vaux1;
+	struct regulator_init_data		*vaux2;
+	struct regulator_init_data		*vaux3;
+	struct regulator_init_data		*vdd1;
+	struct regulator_init_data		*vdd2;
+	struct regulator_init_data		*vdd3;
+	/* TWL4030 LDO regulators */
+	struct regulator_init_data		*vpll1;
+	struct regulator_init_data		*vpll2;
+	struct regulator_init_data		*vmmc1;
+	struct regulator_init_data		*vmmc2;
+	struct regulator_init_data		*vsim;
+	struct regulator_init_data		*vaux4;
+	struct regulator_init_data		*vio;
+	struct regulator_init_data		*vintana1;
+	struct regulator_init_data		*vintana2;
+	struct regulator_init_data		*vintdig;
+	/* TWL6030 LDO regulators */
+	struct regulator_init_data              *vmmc;
+	struct regulator_init_data              *vpp;
+	struct regulator_init_data              *vusim;
+	struct regulator_init_data              *vana;
+	struct regulator_init_data              *vcxio;
+	struct regulator_init_data              *vusb;
+	struct regulator_init_data		*clk32kg;
+	struct regulator_init_data              *v1v8;
+	struct regulator_init_data              *v2v1;
+	/* TWL6025 LDO regulators */
+	struct regulator_init_data		*ldo1;
+	struct regulator_init_data		*ldo2;
+	struct regulator_init_data		*ldo3;
+	struct regulator_init_data		*ldo4;
+	struct regulator_init_data		*ldo5;
+	struct regulator_init_data		*ldo6;
+	struct regulator_init_data		*ldo7;
+	struct regulator_init_data		*ldoln;
+	struct regulator_init_data		*ldousb;
+	/* TWL6025 DCDC regulators */
+	struct regulator_init_data		*smps3;
+	struct regulator_init_data		*smps4;
+	struct regulator_init_data		*vio6025;
+};
+
+struct twl_regulator_driver_data {
+	int		(*set_voltage)(void *data, int target_uV);
+	int		(*get_voltage)(void *data);
+	void		*data;
+	unsigned long	features;
+};
+
+/*----------------------------------------------------------------------*/
+
+int twl4030_sih_setup(struct device *dev, int module, int irq_base);
+
+/* Offsets to Power Registers */
+#define TWL4030_VDAC_DEV_GRP		0x3B
+#define TWL4030_VDAC_DEDICATED		0x3E
+#define TWL4030_VAUX1_DEV_GRP		0x17
+#define TWL4030_VAUX1_DEDICATED		0x1A
+#define TWL4030_VAUX2_DEV_GRP		0x1B
+#define TWL4030_VAUX2_DEDICATED		0x1E
+#define TWL4030_VAUX3_DEV_GRP		0x1F
+#define TWL4030_VAUX3_DEDICATED		0x22
+
+static inline int twl4030charger_usb_en(int enable) { return 0; }
+
+/*----------------------------------------------------------------------*/
+
+/* Linux-specific regulator identifiers ... for now, we only support
+ * the LDOs, and leave the three buck converters alone.  VDD1 and VDD2
+ * need to tie into hardware based voltage scaling (cpufreq etc), while
+ * VIO is generally fixed.
+ */
+
+/* TWL4030 SMPS/LDO's */
+/* EXTERNAL dc-to-dc buck converters */
+#define TWL4030_REG_VDD1	0
+#define TWL4030_REG_VDD2	1
+#define TWL4030_REG_VIO		2
+
+/* EXTERNAL LDOs */
+#define TWL4030_REG_VDAC	3
+#define TWL4030_REG_VPLL1	4
+#define TWL4030_REG_VPLL2	5	/* not on all chips */
+#define TWL4030_REG_VMMC1	6
+#define TWL4030_REG_VMMC2	7	/* not on all chips */
+#define TWL4030_REG_VSIM	8	/* not on all chips */
+#define TWL4030_REG_VAUX1	9	/* not on all chips */
+#define TWL4030_REG_VAUX2_4030	10	/* (twl4030-specific) */
+#define TWL4030_REG_VAUX2	11	/* (twl5030 and newer) */
+#define TWL4030_REG_VAUX3	12	/* not on all chips */
+#define TWL4030_REG_VAUX4	13	/* not on all chips */
+
+/* INTERNAL LDOs */
+#define TWL4030_REG_VINTANA1	14
+#define TWL4030_REG_VINTANA2	15
+#define TWL4030_REG_VINTDIG	16
+#define TWL4030_REG_VUSB1V5	17
+#define TWL4030_REG_VUSB1V8	18
+#define TWL4030_REG_VUSB3V1	19
+
+/* TWL6030 SMPS/LDO's */
+/* EXTERNAL dc-to-dc buck convertor controllable via SR */
+#define TWL6030_REG_VDD1	30
+#define TWL6030_REG_VDD2	31
+#define TWL6030_REG_VDD3	32
+
+/* Non SR compliant dc-to-dc buck convertors */
+#define TWL6030_REG_VMEM	33
+#define TWL6030_REG_V2V1	34
+#define TWL6030_REG_V1V29	35
+#define TWL6030_REG_V1V8	36
+
+/* EXTERNAL LDOs */
+#define TWL6030_REG_VAUX1_6030	37
+#define TWL6030_REG_VAUX2_6030	38
+#define TWL6030_REG_VAUX3_6030	39
+#define TWL6030_REG_VMMC	40
+#define TWL6030_REG_VPP		41
+#define TWL6030_REG_VUSIM	42
+#define TWL6030_REG_VANA	43
+#define TWL6030_REG_VCXIO	44
+#define TWL6030_REG_VDAC	45
+#define TWL6030_REG_VUSB	46
+
+/* INTERNAL LDOs */
+#define TWL6030_REG_VRTC	47
+#define TWL6030_REG_CLK32KG	48
+
+/* LDOs on 6025 have different names */
+#define TWL6025_REG_LDO2	49
+#define TWL6025_REG_LDO4	50
+#define TWL6025_REG_LDO3	51
+#define TWL6025_REG_LDO5	52
+#define TWL6025_REG_LDO1	53
+#define TWL6025_REG_LDO7	54
+#define TWL6025_REG_LDO6	55
+#define TWL6025_REG_LDOLN	56
+#define TWL6025_REG_LDOUSB	57
+
+/* 6025 DCDC supplies */
+#define TWL6025_REG_SMPS3	58
+#define TWL6025_REG_SMPS4	59
+#define TWL6025_REG_VIO		60
+
+
+#endif /* End of __TWL4030_H */
diff --git a/include/linux/i2c/twl4030-madc.h b/include/linux/i2c/twl4030-madc.h
new file mode 100644
index 00000000..530e11ba
--- /dev/null
+++ b/include/linux/i2c/twl4030-madc.h
@@ -0,0 +1,145 @@
+/*
+ * twl4030_madc.h - Header for TWL4030 MADC
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * J Keerthy <j-keerthy@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef _TWL4030_MADC_H
+#define _TWL4030_MADC_H
+
+struct twl4030_madc_conversion_method {
+	u8 sel;
+	u8 avg;
+	u8 rbase;
+	u8 ctrl;
+};
+
+#define TWL4030_MADC_MAX_CHANNELS 16
+
+
+/*
+ * twl4030_madc_request- madc request packet for channel conversion
+ * @channels:	16 bit bitmap for individual channels
+ * @do_avgP:	sample the input channel for 4 consecutive cycles
+ * @method:	RT, SW1, SW2
+ * @type:	Polling or interrupt based method
+ */
+
+struct twl4030_madc_request {
+	unsigned long channels;
+	u16 do_avg;
+	u16 method;
+	u16 type;
+	bool active;
+	bool result_pending;
+	int rbuf[TWL4030_MADC_MAX_CHANNELS];
+	void (*func_cb)(int len, int channels, int *buf);
+};
+
+enum conversion_methods {
+	TWL4030_MADC_RT,
+	TWL4030_MADC_SW1,
+	TWL4030_MADC_SW2,
+	TWL4030_MADC_NUM_METHODS
+};
+
+enum sample_type {
+	TWL4030_MADC_WAIT,
+	TWL4030_MADC_IRQ_ONESHOT,
+	TWL4030_MADC_IRQ_REARM
+};
+
+#define TWL4030_MADC_CTRL1		0x00
+#define TWL4030_MADC_CTRL2		0x01
+
+#define TWL4030_MADC_RTSELECT_LSB	0x02
+#define TWL4030_MADC_SW1SELECT_LSB	0x06
+#define TWL4030_MADC_SW2SELECT_LSB	0x0A
+
+#define TWL4030_MADC_RTAVERAGE_LSB	0x04
+#define TWL4030_MADC_SW1AVERAGE_LSB	0x08
+#define TWL4030_MADC_SW2AVERAGE_LSB	0x0C
+
+#define TWL4030_MADC_CTRL_SW1		0x12
+#define TWL4030_MADC_CTRL_SW2		0x13
+
+#define TWL4030_MADC_RTCH0_LSB		0x17
+#define TWL4030_MADC_GPCH0_LSB		0x37
+
+#define TWL4030_MADC_MADCON	(1 << 0)	/* MADC power on */
+#define TWL4030_MADC_BUSY	(1 << 0)	/* MADC busy */
+/* MADC conversion completion */
+#define TWL4030_MADC_EOC_SW	(1 << 1)
+/* MADC SWx start conversion */
+#define TWL4030_MADC_SW_START	(1 << 5)
+#define TWL4030_MADC_ADCIN0	(1 << 0)
+#define TWL4030_MADC_ADCIN1	(1 << 1)
+#define TWL4030_MADC_ADCIN2	(1 << 2)
+#define TWL4030_MADC_ADCIN3	(1 << 3)
+#define TWL4030_MADC_ADCIN4	(1 << 4)
+#define TWL4030_MADC_ADCIN5	(1 << 5)
+#define TWL4030_MADC_ADCIN6	(1 << 6)
+#define TWL4030_MADC_ADCIN7	(1 << 7)
+#define TWL4030_MADC_ADCIN8	(1 << 8)
+#define TWL4030_MADC_ADCIN9	(1 << 9)
+#define TWL4030_MADC_ADCIN10	(1 << 10)
+#define TWL4030_MADC_ADCIN11	(1 << 11)
+#define TWL4030_MADC_ADCIN12	(1 << 12)
+#define TWL4030_MADC_ADCIN13	(1 << 13)
+#define TWL4030_MADC_ADCIN14	(1 << 14)
+#define TWL4030_MADC_ADCIN15	(1 << 15)
+
+/* Fixed channels */
+#define TWL4030_MADC_BTEMP	TWL4030_MADC_ADCIN1
+#define TWL4030_MADC_VBUS	TWL4030_MADC_ADCIN8
+#define TWL4030_MADC_VBKB	TWL4030_MADC_ADCIN9
+#define TWL4030_MADC_ICHG	TWL4030_MADC_ADCIN10
+#define TWL4030_MADC_VCHG	TWL4030_MADC_ADCIN11
+#define TWL4030_MADC_VBAT	TWL4030_MADC_ADCIN12
+
+/* Step size and prescaler ratio */
+#define TEMP_STEP_SIZE          147
+#define TEMP_PSR_R              100
+#define CURR_STEP_SIZE		147
+#define CURR_PSR_R1		44
+#define CURR_PSR_R2		88
+
+#define TWL4030_BCI_BCICTL1	0x23
+#define TWL4030_BCI_CGAIN	0x020
+#define TWL4030_BCI_MESBAT	(1 << 1)
+#define TWL4030_BCI_TYPEN	(1 << 4)
+#define TWL4030_BCI_ITHEN	(1 << 3)
+
+#define REG_BCICTL2             0x024
+#define TWL4030_BCI_ITHSENS	0x007
+
+/* Register and bits for GPBR1 register */
+#define TWL4030_REG_GPBR1		0x0c
+#define TWL4030_GPBR1_MADC_HFCLK_EN	(1 << 7)
+
+struct twl4030_madc_user_parms {
+	int channel;
+	int average;
+	int status;
+	u16 result;
+};
+
+int twl4030_madc_conversion(struct twl4030_madc_request *conv);
+int twl4030_get_madc_conversion(int channel_no);
+#endif
diff --git a/include/linux/i2o-dev.h b/include/linux/i2o-dev.h
new file mode 100644
index 00000000..a0b23dd4
--- /dev/null
+++ b/include/linux/i2o-dev.h
@@ -0,0 +1,421 @@
+/*
+ * I2O user space accessible structures/APIs
+ *
+ * (c) Copyright 1999, 2000 Red Hat Software
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ *************************************************************************
+ *
+ * This header file defines the I2O APIs that are available to both
+ * the kernel and user level applications.  Kernel specific structures
+ * are defined in i2o_osm. OSMs should include _only_ i2o_osm.h which
+ * automatically includes this file.
+ *
+ */
+
+#ifndef _I2O_DEV_H
+#define _I2O_DEV_H
+
+/* How many controllers are we allowing */
+#define MAX_I2O_CONTROLLERS	32
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/*
+ * I2O Control IOCTLs and structures
+ */
+#define I2O_MAGIC_NUMBER	'i'
+#define I2OGETIOPS		_IOR(I2O_MAGIC_NUMBER,0,__u8[MAX_I2O_CONTROLLERS])
+#define I2OHRTGET		_IOWR(I2O_MAGIC_NUMBER,1,struct i2o_cmd_hrtlct)
+#define I2OLCTGET		_IOWR(I2O_MAGIC_NUMBER,2,struct i2o_cmd_hrtlct)
+#define I2OPARMSET		_IOWR(I2O_MAGIC_NUMBER,3,struct i2o_cmd_psetget)
+#define I2OPARMGET		_IOWR(I2O_MAGIC_NUMBER,4,struct i2o_cmd_psetget)
+#define I2OSWDL 		_IOWR(I2O_MAGIC_NUMBER,5,struct i2o_sw_xfer)
+#define I2OSWUL 		_IOWR(I2O_MAGIC_NUMBER,6,struct i2o_sw_xfer)
+#define I2OSWDEL		_IOWR(I2O_MAGIC_NUMBER,7,struct i2o_sw_xfer)
+#define I2OVALIDATE		_IOR(I2O_MAGIC_NUMBER,8,__u32)
+#define I2OHTML 		_IOWR(I2O_MAGIC_NUMBER,9,struct i2o_html)
+#define I2OEVTREG		_IOW(I2O_MAGIC_NUMBER,10,struct i2o_evt_id)
+#define I2OEVTGET		_IOR(I2O_MAGIC_NUMBER,11,struct i2o_evt_info)
+#define I2OPASSTHRU		_IOR(I2O_MAGIC_NUMBER,12,struct i2o_cmd_passthru)
+#define I2OPASSTHRU32		_IOR(I2O_MAGIC_NUMBER,12,struct i2o_cmd_passthru32)
+
+struct i2o_cmd_passthru32 {
+	unsigned int iop;	/* IOP unit number */
+	__u32 msg;		/* message */
+};
+
+struct i2o_cmd_passthru {
+	unsigned int iop;	/* IOP unit number */
+	void __user *msg;	/* message */
+};
+
+struct i2o_cmd_hrtlct {
+	unsigned int iop;	/* IOP unit number */
+	void __user *resbuf;	/* Buffer for result */
+	unsigned int __user *reslen;	/* Buffer length in bytes */
+};
+
+struct i2o_cmd_psetget {
+	unsigned int iop;	/* IOP unit number */
+	unsigned int tid;	/* Target device TID */
+	void __user *opbuf;	/* Operation List buffer */
+	unsigned int oplen;	/* Operation List buffer length in bytes */
+	void __user *resbuf;	/* Result List buffer */
+	unsigned int __user *reslen;	/* Result List buffer length in bytes */
+};
+
+struct i2o_sw_xfer {
+	unsigned int iop;	/* IOP unit number */
+	unsigned char flags;	/* Flags field */
+	unsigned char sw_type;	/* Software type */
+	unsigned int sw_id;	/* Software ID */
+	void __user *buf;	/* Pointer to software buffer */
+	unsigned int __user *swlen;	/* Length of software data */
+	unsigned int __user *maxfrag;	/* Maximum fragment count */
+	unsigned int __user *curfrag;	/* Current fragment count */
+};
+
+struct i2o_html {
+	unsigned int iop;	/* IOP unit number */
+	unsigned int tid;	/* Target device ID */
+	unsigned int page;	/* HTML page */
+	void __user *resbuf;	/* Buffer for reply HTML page */
+	unsigned int __user *reslen;	/* Length in bytes of reply buffer */
+	void __user *qbuf;	/* Pointer to HTTP query string */
+	unsigned int qlen;	/* Length in bytes of query string buffer */
+};
+
+#define I2O_EVT_Q_LEN 32
+
+struct i2o_evt_id {
+	unsigned int iop;
+	unsigned int tid;
+	unsigned int evt_mask;
+};
+
+/* Event data size = frame size - message header + evt indicator */
+#define I2O_EVT_DATA_SIZE 88
+
+struct i2o_evt_info {
+	struct i2o_evt_id id;
+	unsigned char evt_data[I2O_EVT_DATA_SIZE];
+	unsigned int data_size;
+};
+
+struct i2o_evt_get {
+	struct i2o_evt_info info;
+	int pending;
+	int lost;
+};
+
+typedef struct i2o_sg_io_hdr {
+	unsigned int flags;	/* see I2O_DPT_SG_IO_FLAGS */
+} i2o_sg_io_hdr_t;
+
+/**************************************************************************
+ * HRT related constants and structures
+ **************************************************************************/
+#define I2O_BUS_LOCAL	0
+#define I2O_BUS_ISA	1
+#define I2O_BUS_EISA	2
+#define I2O_BUS_MCA	3
+#define I2O_BUS_PCI	4
+#define I2O_BUS_PCMCIA	5
+#define I2O_BUS_NUBUS	6
+#define I2O_BUS_CARDBUS 7
+#define I2O_BUS_UNKNOWN 0x80
+
+typedef struct _i2o_pci_bus {
+	__u8 PciFunctionNumber;
+	__u8 PciDeviceNumber;
+	__u8 PciBusNumber;
+	__u8 reserved;
+	__u16 PciVendorID;
+	__u16 PciDeviceID;
+} i2o_pci_bus;
+
+typedef struct _i2o_local_bus {
+	__u16 LbBaseIOPort;
+	__u16 reserved;
+	__u32 LbBaseMemoryAddress;
+} i2o_local_bus;
+
+typedef struct _i2o_isa_bus {
+	__u16 IsaBaseIOPort;
+	__u8 CSN;
+	__u8 reserved;
+	__u32 IsaBaseMemoryAddress;
+} i2o_isa_bus;
+
+typedef struct _i2o_eisa_bus_info {
+	__u16 EisaBaseIOPort;
+	__u8 reserved;
+	__u8 EisaSlotNumber;
+	__u32 EisaBaseMemoryAddress;
+} i2o_eisa_bus;
+
+typedef struct _i2o_mca_bus {
+	__u16 McaBaseIOPort;
+	__u8 reserved;
+	__u8 McaSlotNumber;
+	__u32 McaBaseMemoryAddress;
+} i2o_mca_bus;
+
+typedef struct _i2o_other_bus {
+	__u16 BaseIOPort;
+	__u16 reserved;
+	__u32 BaseMemoryAddress;
+} i2o_other_bus;
+
+typedef struct _i2o_hrt_entry {
+	__u32 adapter_id;
+	__u32 parent_tid:12;
+	__u32 state:4;
+	__u32 bus_num:8;
+	__u32 bus_type:8;
+	union {
+		i2o_pci_bus pci_bus;
+		i2o_local_bus local_bus;
+		i2o_isa_bus isa_bus;
+		i2o_eisa_bus eisa_bus;
+		i2o_mca_bus mca_bus;
+		i2o_other_bus other_bus;
+	} bus;
+} i2o_hrt_entry;
+
+typedef struct _i2o_hrt {
+	__u16 num_entries;
+	__u8 entry_len;
+	__u8 hrt_version;
+	__u32 change_ind;
+	i2o_hrt_entry hrt_entry[1];
+} i2o_hrt;
+
+typedef struct _i2o_lct_entry {
+	__u32 entry_size:16;
+	__u32 tid:12;
+	__u32 reserved:4;
+	__u32 change_ind;
+	__u32 device_flags;
+	__u32 class_id:12;
+	__u32 version:4;
+	__u32 vendor_id:16;
+	__u32 sub_class;
+	__u32 user_tid:12;
+	__u32 parent_tid:12;
+	__u32 bios_info:8;
+	__u8 identity_tag[8];
+	__u32 event_capabilities;
+} i2o_lct_entry;
+
+typedef struct _i2o_lct {
+	__u32 table_size:16;
+	__u32 boot_tid:12;
+	__u32 lct_ver:4;
+	__u32 iop_flags;
+	__u32 change_ind;
+	i2o_lct_entry lct_entry[1];
+} i2o_lct;
+
+typedef struct _i2o_status_block {
+	__u16 org_id;
+	__u16 reserved;
+	__u16 iop_id:12;
+	__u16 reserved1:4;
+	__u16 host_unit_id;
+	__u16 segment_number:12;
+	__u16 i2o_version:4;
+	__u8 iop_state;
+	__u8 msg_type;
+	__u16 inbound_frame_size;
+	__u8 init_code;
+	__u8 reserved2;
+	__u32 max_inbound_frames;
+	__u32 cur_inbound_frames;
+	__u32 max_outbound_frames;
+	char product_id[24];
+	__u32 expected_lct_size;
+	__u32 iop_capabilities;
+	__u32 desired_mem_size;
+	__u32 current_mem_size;
+	__u32 current_mem_base;
+	__u32 desired_io_size;
+	__u32 current_io_size;
+	__u32 current_io_base;
+	__u32 reserved3:24;
+	__u32 cmd_status:8;
+} i2o_status_block;
+
+/* Event indicator mask flags */
+#define I2O_EVT_IND_STATE_CHANGE		0x80000000
+#define I2O_EVT_IND_GENERAL_WARNING		0x40000000
+#define I2O_EVT_IND_CONFIGURATION_FLAG		0x20000000
+#define I2O_EVT_IND_LOCK_RELEASE		0x10000000
+#define I2O_EVT_IND_CAPABILITY_CHANGE		0x08000000
+#define I2O_EVT_IND_DEVICE_RESET		0x04000000
+#define I2O_EVT_IND_EVT_MASK_MODIFIED		0x02000000
+#define I2O_EVT_IND_FIELD_MODIFIED		0x01000000
+#define I2O_EVT_IND_VENDOR_EVT			0x00800000
+#define I2O_EVT_IND_DEVICE_STATE		0x00400000
+
+/* Executive event indicitors */
+#define I2O_EVT_IND_EXEC_RESOURCE_LIMITS	0x00000001
+#define I2O_EVT_IND_EXEC_CONNECTION_FAIL	0x00000002
+#define I2O_EVT_IND_EXEC_ADAPTER_FAULT		0x00000004
+#define I2O_EVT_IND_EXEC_POWER_FAIL		0x00000008
+#define I2O_EVT_IND_EXEC_RESET_PENDING		0x00000010
+#define I2O_EVT_IND_EXEC_RESET_IMMINENT 	0x00000020
+#define I2O_EVT_IND_EXEC_HW_FAIL		0x00000040
+#define I2O_EVT_IND_EXEC_XCT_CHANGE		0x00000080
+#define I2O_EVT_IND_EXEC_NEW_LCT_ENTRY		0x00000100
+#define I2O_EVT_IND_EXEC_MODIFIED_LCT		0x00000200
+#define I2O_EVT_IND_EXEC_DDM_AVAILABILITY	0x00000400
+
+/* Random Block Storage Event Indicators */
+#define I2O_EVT_IND_BSA_VOLUME_LOAD		0x00000001
+#define I2O_EVT_IND_BSA_VOLUME_UNLOAD		0x00000002
+#define I2O_EVT_IND_BSA_VOLUME_UNLOAD_REQ	0x00000004
+#define I2O_EVT_IND_BSA_CAPACITY_CHANGE 	0x00000008
+#define I2O_EVT_IND_BSA_SCSI_SMART		0x00000010
+
+/* Event data for generic events */
+#define I2O_EVT_STATE_CHANGE_NORMAL		0x00
+#define I2O_EVT_STATE_CHANGE_SUSPENDED		0x01
+#define I2O_EVT_STATE_CHANGE_RESTART		0x02
+#define I2O_EVT_STATE_CHANGE_NA_RECOVER 	0x03
+#define I2O_EVT_STATE_CHANGE_NA_NO_RECOVER	0x04
+#define I2O_EVT_STATE_CHANGE_QUIESCE_REQUEST	0x05
+#define I2O_EVT_STATE_CHANGE_FAILED		0x10
+#define I2O_EVT_STATE_CHANGE_FAULTED		0x11
+
+#define I2O_EVT_GEN_WARNING_NORMAL		0x00
+#define I2O_EVT_GEN_WARNING_ERROR_THRESHOLD	0x01
+#define I2O_EVT_GEN_WARNING_MEDIA_FAULT 	0x02
+
+#define I2O_EVT_CAPABILITY_OTHER		0x01
+#define I2O_EVT_CAPABILITY_CHANGED		0x02
+
+#define I2O_EVT_SENSOR_STATE_CHANGED		0x01
+
+/*
+ *	I2O classes / subclasses
+ */
+
+/*  Class ID and Code Assignments
+ *  (LCT.ClassID.Version field)
+ */
+#define I2O_CLASS_VERSION_10			0x00
+#define I2O_CLASS_VERSION_11			0x01
+
+/*  Class code names
+ *  (from v1.5 Table 6-1 Class Code Assignments.)
+ */
+
+#define I2O_CLASS_EXECUTIVE			0x000
+#define I2O_CLASS_DDM				0x001
+#define I2O_CLASS_RANDOM_BLOCK_STORAGE		0x010
+#define I2O_CLASS_SEQUENTIAL_STORAGE		0x011
+#define I2O_CLASS_LAN				0x020
+#define I2O_CLASS_WAN				0x030
+#define I2O_CLASS_FIBRE_CHANNEL_PORT		0x040
+#define I2O_CLASS_FIBRE_CHANNEL_PERIPHERAL	0x041
+#define I2O_CLASS_SCSI_PERIPHERAL		0x051
+#define I2O_CLASS_ATE_PORT			0x060
+#define I2O_CLASS_ATE_PERIPHERAL		0x061
+#define I2O_CLASS_FLOPPY_CONTROLLER		0x070
+#define I2O_CLASS_FLOPPY_DEVICE 		0x071
+#define I2O_CLASS_BUS_ADAPTER			0x080
+#define I2O_CLASS_PEER_TRANSPORT_AGENT		0x090
+#define I2O_CLASS_PEER_TRANSPORT		0x091
+#define	I2O_CLASS_END				0xfff
+
+/*
+ *  Rest of 0x092 - 0x09f reserved for peer-to-peer classes
+ */
+
+#define I2O_CLASS_MATCH_ANYCLASS		0xffffffff
+
+/*
+ *  Subclasses
+ */
+
+#define I2O_SUBCLASS_i960			0x001
+#define I2O_SUBCLASS_HDM			0x020
+#define I2O_SUBCLASS_ISM			0x021
+
+/* Operation functions */
+
+#define I2O_PARAMS_FIELD_GET			0x0001
+#define I2O_PARAMS_LIST_GET			0x0002
+#define I2O_PARAMS_MORE_GET			0x0003
+#define I2O_PARAMS_SIZE_GET			0x0004
+#define I2O_PARAMS_TABLE_GET			0x0005
+#define I2O_PARAMS_FIELD_SET			0x0006
+#define I2O_PARAMS_LIST_SET			0x0007
+#define I2O_PARAMS_ROW_ADD			0x0008
+#define I2O_PARAMS_ROW_DELETE			0x0009
+#define I2O_PARAMS_TABLE_CLEAR			0x000A
+
+/*
+ * I2O serial number conventions / formats
+ * (circa v1.5)
+ */
+
+#define I2O_SNFORMAT_UNKNOWN			0
+#define I2O_SNFORMAT_BINARY			1
+#define I2O_SNFORMAT_ASCII			2
+#define I2O_SNFORMAT_UNICODE			3
+#define I2O_SNFORMAT_LAN48_MAC			4
+#define I2O_SNFORMAT_WAN			5
+
+/*
+ * Plus new in v2.0 (Yellowstone pdf doc)
+ */
+
+#define I2O_SNFORMAT_LAN64_MAC			6
+#define I2O_SNFORMAT_DDM			7
+#define I2O_SNFORMAT_IEEE_REG64 		8
+#define I2O_SNFORMAT_IEEE_REG128		9
+#define I2O_SNFORMAT_UNKNOWN2			0xff
+
+/*
+ *	I2O Get Status State values
+ */
+
+#define ADAPTER_STATE_INITIALIZING		0x01
+#define ADAPTER_STATE_RESET			0x02
+#define ADAPTER_STATE_HOLD			0x04
+#define ADAPTER_STATE_READY			0x05
+#define ADAPTER_STATE_OPERATIONAL		0x08
+#define ADAPTER_STATE_FAILED			0x10
+#define ADAPTER_STATE_FAULTED			0x11
+
+/*
+ *	Software module types
+ */
+#define I2O_SOFTWARE_MODULE_IRTOS		0x11
+#define I2O_SOFTWARE_MODULE_IOP_PRIVATE		0x22
+#define I2O_SOFTWARE_MODULE_IOP_CONFIG		0x23
+
+/*
+ *	Vendors
+ */
+#define I2O_VENDOR_DPT				0x001b
+
+/*
+ * DPT / Adaptec specific values for i2o_sg_io_hdr flags.
+ */
+#define I2O_DPT_SG_FLAG_INTERPRET		0x00010000
+#define I2O_DPT_SG_FLAG_PHYSICAL		0x00020000
+
+#define I2O_DPT_FLASH_FRAG_SIZE			0x10000
+#define I2O_DPT_FLASH_READ			0x0101
+#define I2O_DPT_FLASH_WRITE			0x0102
+
+#endif				/* _I2O_DEV_H */
diff --git a/include/linux/i2o.h b/include/linux/i2o.h
new file mode 100644
index 00000000..d23c3c20
--- /dev/null
+++ b/include/linux/i2o.h
@@ -0,0 +1,988 @@
+/*
+ * I2O kernel space accessible structures/APIs
+ *
+ * (c) Copyright 1999, 2000 Red Hat Software
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ *************************************************************************
+ *
+ * This header file defined the I2O APIs/structures for use by
+ * the I2O kernel modules.
+ *
+ */
+
+#ifndef _I2O_H
+#define _I2O_H
+
+#include <linux/i2o-dev.h>
+
+/* How many different OSM's are we allowing */
+#define I2O_MAX_DRIVERS		8
+
+#include <linux/pci.h>
+#include <linux/bug.h>
+#include <linux/dma-mapping.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>	/* work_struct */
+#include <linux/mempool.h>
+#include <linux/mutex.h>
+#include <linux/scatterlist.h>
+#include <linux/semaphore.h>	/* Needed for MUTEX init macros */
+
+#include <asm/io.h>
+
+/* message queue empty */
+#define I2O_QUEUE_EMPTY		0xffffffff
+
+/*
+ *	Cache strategies
+ */
+
+/*	The NULL strategy leaves everything up to the controller. This tends to be a
+ *	pessimal but functional choice.
+ */
+#define CACHE_NULL		0
+/*	Prefetch data when reading. We continually attempt to load the next 32 sectors
+ *	into the controller cache.
+ */
+#define CACHE_PREFETCH		1
+/*	Prefetch data when reading. We sometimes attempt to load the next 32 sectors
+ *	into the controller cache. When an I/O is less <= 8K we assume its probably
+ *	not sequential and don't prefetch (default)
+ */
+#define CACHE_SMARTFETCH	2
+/*	Data is written to the cache and then out on to the disk. The I/O must be
+ *	physically on the medium before the write is acknowledged (default without
+ *	NVRAM)
+ */
+#define CACHE_WRITETHROUGH	17
+/*	Data is written to the cache and then out on to the disk. The controller
+ *	is permitted to write back the cache any way it wants. (default if battery
+ *	backed NVRAM is present). It can be useful to set this for swap regardless of
+ *	battery state.
+ */
+#define CACHE_WRITEBACK		18
+/*	Optimise for under powered controllers, especially on RAID1 and RAID0. We
+ *	write large I/O's directly to disk bypassing the cache to avoid the extra
+ *	memory copy hits. Small writes are writeback cached
+ */
+#define CACHE_SMARTBACK		19
+/*	Optimise for under powered controllers, especially on RAID1 and RAID0. We
+ *	write large I/O's directly to disk bypassing the cache to avoid the extra
+ *	memory copy hits. Small writes are writethrough cached. Suitable for devices
+ *	lacking battery backup
+ */
+#define CACHE_SMARTTHROUGH	20
+
+/*
+ *	Ioctl structures
+ */
+
+#define 	BLKI2OGRSTRAT	_IOR('2', 1, int)
+#define 	BLKI2OGWSTRAT	_IOR('2', 2, int)
+#define 	BLKI2OSRSTRAT	_IOW('2', 3, int)
+#define 	BLKI2OSWSTRAT	_IOW('2', 4, int)
+
+/*
+ *	I2O Function codes
+ */
+
+/*
+ *	Executive Class
+ */
+#define	I2O_CMD_ADAPTER_ASSIGN		0xB3
+#define	I2O_CMD_ADAPTER_READ		0xB2
+#define	I2O_CMD_ADAPTER_RELEASE		0xB5
+#define	I2O_CMD_BIOS_INFO_SET		0xA5
+#define	I2O_CMD_BOOT_DEVICE_SET		0xA7
+#define	I2O_CMD_CONFIG_VALIDATE		0xBB
+#define	I2O_CMD_CONN_SETUP		0xCA
+#define	I2O_CMD_DDM_DESTROY		0xB1
+#define	I2O_CMD_DDM_ENABLE		0xD5
+#define	I2O_CMD_DDM_QUIESCE		0xC7
+#define	I2O_CMD_DDM_RESET		0xD9
+#define	I2O_CMD_DDM_SUSPEND		0xAF
+#define	I2O_CMD_DEVICE_ASSIGN		0xB7
+#define	I2O_CMD_DEVICE_RELEASE		0xB9
+#define	I2O_CMD_HRT_GET			0xA8
+#define	I2O_CMD_ADAPTER_CLEAR		0xBE
+#define	I2O_CMD_ADAPTER_CONNECT		0xC9
+#define	I2O_CMD_ADAPTER_RESET		0xBD
+#define	I2O_CMD_LCT_NOTIFY		0xA2
+#define	I2O_CMD_OUTBOUND_INIT		0xA1
+#define	I2O_CMD_PATH_ENABLE		0xD3
+#define	I2O_CMD_PATH_QUIESCE		0xC5
+#define	I2O_CMD_PATH_RESET		0xD7
+#define	I2O_CMD_STATIC_MF_CREATE	0xDD
+#define	I2O_CMD_STATIC_MF_RELEASE	0xDF
+#define	I2O_CMD_STATUS_GET		0xA0
+#define	I2O_CMD_SW_DOWNLOAD		0xA9
+#define	I2O_CMD_SW_UPLOAD		0xAB
+#define	I2O_CMD_SW_REMOVE		0xAD
+#define	I2O_CMD_SYS_ENABLE		0xD1
+#define	I2O_CMD_SYS_MODIFY		0xC1
+#define	I2O_CMD_SYS_QUIESCE		0xC3
+#define	I2O_CMD_SYS_TAB_SET		0xA3
+
+/*
+ * Utility Class
+ */
+#define I2O_CMD_UTIL_NOP		0x00
+#define I2O_CMD_UTIL_ABORT		0x01
+#define I2O_CMD_UTIL_CLAIM		0x09
+#define I2O_CMD_UTIL_RELEASE		0x0B
+#define I2O_CMD_UTIL_PARAMS_GET		0x06
+#define I2O_CMD_UTIL_PARAMS_SET		0x05
+#define I2O_CMD_UTIL_EVT_REGISTER	0x13
+#define I2O_CMD_UTIL_EVT_ACK		0x14
+#define I2O_CMD_UTIL_CONFIG_DIALOG	0x10
+#define I2O_CMD_UTIL_DEVICE_RESERVE	0x0D
+#define I2O_CMD_UTIL_DEVICE_RELEASE	0x0F
+#define I2O_CMD_UTIL_LOCK		0x17
+#define I2O_CMD_UTIL_LOCK_RELEASE	0x19
+#define I2O_CMD_UTIL_REPLY_FAULT_NOTIFY	0x15
+
+/*
+ * SCSI Host Bus Adapter Class
+ */
+#define I2O_CMD_SCSI_EXEC		0x81
+#define I2O_CMD_SCSI_ABORT		0x83
+#define I2O_CMD_SCSI_BUSRESET		0x27
+
+/*
+ * Bus Adapter Class
+ */
+#define I2O_CMD_BUS_ADAPTER_RESET	0x85
+#define I2O_CMD_BUS_RESET		0x87
+#define I2O_CMD_BUS_SCAN		0x89
+#define I2O_CMD_BUS_QUIESCE		0x8b
+
+/*
+ * Random Block Storage Class
+ */
+#define I2O_CMD_BLOCK_READ		0x30
+#define I2O_CMD_BLOCK_WRITE		0x31
+#define I2O_CMD_BLOCK_CFLUSH		0x37
+#define I2O_CMD_BLOCK_MLOCK		0x49
+#define I2O_CMD_BLOCK_MUNLOCK		0x4B
+#define I2O_CMD_BLOCK_MMOUNT		0x41
+#define I2O_CMD_BLOCK_MEJECT		0x43
+#define I2O_CMD_BLOCK_POWER		0x70
+
+#define I2O_CMD_PRIVATE			0xFF
+
+/* Command status values  */
+
+#define I2O_CMD_IN_PROGRESS	0x01
+#define I2O_CMD_REJECTED	0x02
+#define I2O_CMD_FAILED		0x03
+#define I2O_CMD_COMPLETED	0x04
+
+/* I2O API function return values */
+
+#define I2O_RTN_NO_ERROR			0
+#define I2O_RTN_NOT_INIT			1
+#define I2O_RTN_FREE_Q_EMPTY			2
+#define I2O_RTN_TCB_ERROR			3
+#define I2O_RTN_TRANSACTION_ERROR		4
+#define I2O_RTN_ADAPTER_ALREADY_INIT		5
+#define I2O_RTN_MALLOC_ERROR			6
+#define I2O_RTN_ADPTR_NOT_REGISTERED		7
+#define I2O_RTN_MSG_REPLY_TIMEOUT		8
+#define I2O_RTN_NO_STATUS			9
+#define I2O_RTN_NO_FIRM_VER			10
+#define	I2O_RTN_NO_LINK_SPEED			11
+
+/* Reply message status defines for all messages */
+
+#define I2O_REPLY_STATUS_SUCCESS                    	0x00
+#define I2O_REPLY_STATUS_ABORT_DIRTY                	0x01
+#define I2O_REPLY_STATUS_ABORT_NO_DATA_TRANSFER     	0x02
+#define	I2O_REPLY_STATUS_ABORT_PARTIAL_TRANSFER		0x03
+#define	I2O_REPLY_STATUS_ERROR_DIRTY			0x04
+#define	I2O_REPLY_STATUS_ERROR_NO_DATA_TRANSFER		0x05
+#define	I2O_REPLY_STATUS_ERROR_PARTIAL_TRANSFER		0x06
+#define	I2O_REPLY_STATUS_PROCESS_ABORT_DIRTY		0x08
+#define	I2O_REPLY_STATUS_PROCESS_ABORT_NO_DATA_TRANSFER	0x09
+#define	I2O_REPLY_STATUS_PROCESS_ABORT_PARTIAL_TRANSFER	0x0A
+#define	I2O_REPLY_STATUS_TRANSACTION_ERROR		0x0B
+#define	I2O_REPLY_STATUS_PROGRESS_REPORT		0x80
+
+/* Status codes and Error Information for Parameter functions */
+
+#define I2O_PARAMS_STATUS_SUCCESS		0x00
+#define I2O_PARAMS_STATUS_BAD_KEY_ABORT		0x01
+#define I2O_PARAMS_STATUS_BAD_KEY_CONTINUE   	0x02
+#define I2O_PARAMS_STATUS_BUFFER_FULL		0x03
+#define I2O_PARAMS_STATUS_BUFFER_TOO_SMALL	0x04
+#define I2O_PARAMS_STATUS_FIELD_UNREADABLE	0x05
+#define I2O_PARAMS_STATUS_FIELD_UNWRITEABLE	0x06
+#define I2O_PARAMS_STATUS_INSUFFICIENT_FIELDS	0x07
+#define I2O_PARAMS_STATUS_INVALID_GROUP_ID	0x08
+#define I2O_PARAMS_STATUS_INVALID_OPERATION	0x09
+#define I2O_PARAMS_STATUS_NO_KEY_FIELD		0x0A
+#define I2O_PARAMS_STATUS_NO_SUCH_FIELD		0x0B
+#define I2O_PARAMS_STATUS_NON_DYNAMIC_GROUP	0x0C
+#define I2O_PARAMS_STATUS_OPERATION_ERROR	0x0D
+#define I2O_PARAMS_STATUS_SCALAR_ERROR		0x0E
+#define I2O_PARAMS_STATUS_TABLE_ERROR		0x0F
+#define I2O_PARAMS_STATUS_WRONG_GROUP_TYPE	0x10
+
+/* DetailedStatusCode defines for Executive, DDM, Util and Transaction error
+ * messages: Table 3-2 Detailed Status Codes.*/
+
+#define I2O_DSC_SUCCESS                        0x0000
+#define I2O_DSC_BAD_KEY                        0x0002
+#define I2O_DSC_TCL_ERROR                      0x0003
+#define I2O_DSC_REPLY_BUFFER_FULL              0x0004
+#define I2O_DSC_NO_SUCH_PAGE                   0x0005
+#define I2O_DSC_INSUFFICIENT_RESOURCE_SOFT     0x0006
+#define I2O_DSC_INSUFFICIENT_RESOURCE_HARD     0x0007
+#define I2O_DSC_CHAIN_BUFFER_TOO_LARGE         0x0009
+#define I2O_DSC_UNSUPPORTED_FUNCTION           0x000A
+#define I2O_DSC_DEVICE_LOCKED                  0x000B
+#define I2O_DSC_DEVICE_RESET                   0x000C
+#define I2O_DSC_INAPPROPRIATE_FUNCTION         0x000D
+#define I2O_DSC_INVALID_INITIATOR_ADDRESS      0x000E
+#define I2O_DSC_INVALID_MESSAGE_FLAGS          0x000F
+#define I2O_DSC_INVALID_OFFSET                 0x0010
+#define I2O_DSC_INVALID_PARAMETER              0x0011
+#define I2O_DSC_INVALID_REQUEST                0x0012
+#define I2O_DSC_INVALID_TARGET_ADDRESS         0x0013
+#define I2O_DSC_MESSAGE_TOO_LARGE              0x0014
+#define I2O_DSC_MESSAGE_TOO_SMALL              0x0015
+#define I2O_DSC_MISSING_PARAMETER              0x0016
+#define I2O_DSC_TIMEOUT                        0x0017
+#define I2O_DSC_UNKNOWN_ERROR                  0x0018
+#define I2O_DSC_UNKNOWN_FUNCTION               0x0019
+#define I2O_DSC_UNSUPPORTED_VERSION            0x001A
+#define I2O_DSC_DEVICE_BUSY                    0x001B
+#define I2O_DSC_DEVICE_NOT_AVAILABLE           0x001C
+
+/* DetailedStatusCode defines for Block Storage Operation: Table 6-7 Detailed
+   Status Codes.*/
+
+#define I2O_BSA_DSC_SUCCESS               0x0000
+#define I2O_BSA_DSC_MEDIA_ERROR           0x0001
+#define I2O_BSA_DSC_ACCESS_ERROR          0x0002
+#define I2O_BSA_DSC_DEVICE_FAILURE        0x0003
+#define I2O_BSA_DSC_DEVICE_NOT_READY      0x0004
+#define I2O_BSA_DSC_MEDIA_NOT_PRESENT     0x0005
+#define I2O_BSA_DSC_MEDIA_LOCKED          0x0006
+#define I2O_BSA_DSC_MEDIA_FAILURE         0x0007
+#define I2O_BSA_DSC_PROTOCOL_FAILURE      0x0008
+#define I2O_BSA_DSC_BUS_FAILURE           0x0009
+#define I2O_BSA_DSC_ACCESS_VIOLATION      0x000A
+#define I2O_BSA_DSC_WRITE_PROTECTED       0x000B
+#define I2O_BSA_DSC_DEVICE_RESET          0x000C
+#define I2O_BSA_DSC_VOLUME_CHANGED        0x000D
+#define I2O_BSA_DSC_TIMEOUT               0x000E
+
+/* FailureStatusCodes, Table 3-3 Message Failure Codes */
+
+#define I2O_FSC_TRANSPORT_SERVICE_SUSPENDED             0x81
+#define I2O_FSC_TRANSPORT_SERVICE_TERMINATED            0x82
+#define I2O_FSC_TRANSPORT_CONGESTION                    0x83
+#define I2O_FSC_TRANSPORT_FAILURE                       0x84
+#define I2O_FSC_TRANSPORT_STATE_ERROR                   0x85
+#define I2O_FSC_TRANSPORT_TIME_OUT                      0x86
+#define I2O_FSC_TRANSPORT_ROUTING_FAILURE               0x87
+#define I2O_FSC_TRANSPORT_INVALID_VERSION               0x88
+#define I2O_FSC_TRANSPORT_INVALID_OFFSET                0x89
+#define I2O_FSC_TRANSPORT_INVALID_MSG_FLAGS             0x8A
+#define I2O_FSC_TRANSPORT_FRAME_TOO_SMALL               0x8B
+#define I2O_FSC_TRANSPORT_FRAME_TOO_LARGE               0x8C
+#define I2O_FSC_TRANSPORT_INVALID_TARGET_ID             0x8D
+#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_ID          0x8E
+#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_CONTEXT     0x8F
+#define I2O_FSC_TRANSPORT_UNKNOWN_FAILURE               0xFF
+
+/* Device Claim Types */
+#define	I2O_CLAIM_PRIMARY					0x01000000
+#define	I2O_CLAIM_MANAGEMENT					0x02000000
+#define	I2O_CLAIM_AUTHORIZED					0x03000000
+#define	I2O_CLAIM_SECONDARY					0x04000000
+
+/* Message header defines for VersionOffset */
+#define I2OVER15	0x0001
+#define I2OVER20	0x0002
+
+/* Default is 1.5 */
+#define I2OVERSION	I2OVER15
+
+#define SGL_OFFSET_0    I2OVERSION
+#define SGL_OFFSET_4    (0x0040 | I2OVERSION)
+#define SGL_OFFSET_5    (0x0050 | I2OVERSION)
+#define SGL_OFFSET_6    (0x0060 | I2OVERSION)
+#define SGL_OFFSET_7    (0x0070 | I2OVERSION)
+#define SGL_OFFSET_8    (0x0080 | I2OVERSION)
+#define SGL_OFFSET_9    (0x0090 | I2OVERSION)
+#define SGL_OFFSET_10   (0x00A0 | I2OVERSION)
+#define SGL_OFFSET_11   (0x00B0 | I2OVERSION)
+#define SGL_OFFSET_12   (0x00C0 | I2OVERSION)
+#define SGL_OFFSET(x)   (((x)<<4) | I2OVERSION)
+
+/* Transaction Reply Lists (TRL) Control Word structure */
+#define TRL_SINGLE_FIXED_LENGTH		0x00
+#define TRL_SINGLE_VARIABLE_LENGTH	0x40
+#define TRL_MULTIPLE_FIXED_LENGTH	0x80
+
+ /* msg header defines for MsgFlags */
+#define MSG_STATIC	0x0100
+#define MSG_64BIT_CNTXT	0x0200
+#define MSG_MULTI_TRANS	0x1000
+#define MSG_FAIL	0x2000
+#define MSG_FINAL	0x4000
+#define MSG_REPLY	0x8000
+
+ /* minimum size msg */
+#define THREE_WORD_MSG_SIZE	0x00030000
+#define FOUR_WORD_MSG_SIZE	0x00040000
+#define FIVE_WORD_MSG_SIZE	0x00050000
+#define SIX_WORD_MSG_SIZE	0x00060000
+#define SEVEN_WORD_MSG_SIZE	0x00070000
+#define EIGHT_WORD_MSG_SIZE	0x00080000
+#define NINE_WORD_MSG_SIZE	0x00090000
+#define TEN_WORD_MSG_SIZE	0x000A0000
+#define ELEVEN_WORD_MSG_SIZE	0x000B0000
+#define I2O_MESSAGE_SIZE(x)	((x)<<16)
+
+/* special TID assignments */
+#define ADAPTER_TID		0
+#define HOST_TID		1
+
+/* outbound queue defines */
+#define I2O_MAX_OUTBOUND_MSG_FRAMES	128
+#define I2O_OUTBOUND_MSG_FRAME_SIZE	128	/* in 32-bit words */
+
+/* inbound queue definitions */
+#define I2O_MSG_INPOOL_MIN		32
+#define I2O_INBOUND_MSG_FRAME_SIZE	128	/* in 32-bit words */
+
+#define I2O_POST_WAIT_OK	0
+#define I2O_POST_WAIT_TIMEOUT	-ETIMEDOUT
+
+#define I2O_CONTEXT_LIST_MIN_LENGTH	15
+#define I2O_CONTEXT_LIST_USED		0x01
+#define I2O_CONTEXT_LIST_DELETED	0x02
+
+/* timeouts */
+#define I2O_TIMEOUT_INIT_OUTBOUND_QUEUE	15
+#define I2O_TIMEOUT_MESSAGE_GET		5
+#define I2O_TIMEOUT_RESET		30
+#define I2O_TIMEOUT_STATUS_GET		5
+#define I2O_TIMEOUT_LCT_GET		360
+#define I2O_TIMEOUT_SCSI_SCB_ABORT	240
+
+/* retries */
+#define I2O_HRT_GET_TRIES		3
+#define I2O_LCT_GET_TRIES		3
+
+/* defines for max_sectors and max_phys_segments */
+#define I2O_MAX_SECTORS			1024
+#define I2O_MAX_SECTORS_LIMITED		128
+#define I2O_MAX_PHYS_SEGMENTS		BLK_MAX_SEGMENTS
+
+/*
+ *	Message structures
+ */
+struct i2o_message {
+	union {
+		struct {
+			u8 version_offset;
+			u8 flags;
+			u16 size;
+			u32 target_tid:12;
+			u32 init_tid:12;
+			u32 function:8;
+			u32 icntxt;	/* initiator context */
+			u32 tcntxt;	/* transaction context */
+		} s;
+		u32 head[4];
+	} u;
+	/* List follows */
+	u32 body[0];
+};
+
+/* MFA and I2O message used by mempool */
+struct i2o_msg_mfa {
+	u32 mfa;		/* MFA returned by the controller */
+	struct i2o_message msg;	/* I2O message */
+};
+
+/*
+ *	Each I2O device entity has one of these. There is one per device.
+ */
+struct i2o_device {
+	i2o_lct_entry lct_data;	/* Device LCT information */
+
+	struct i2o_controller *iop;	/* Controlling IOP */
+	struct list_head list;	/* node in IOP devices list */
+
+	struct device device;
+
+	struct mutex lock;	/* device lock */
+};
+
+/*
+ *	Event structure provided to the event handling function
+ */
+struct i2o_event {
+	struct work_struct work;
+	struct i2o_device *i2o_dev;	/* I2O device pointer from which the
+					   event reply was initiated */
+	u16 size;		/* Size of data in 32-bit words */
+	u32 tcntxt;		/* Transaction context used at
+				   registration */
+	u32 event_indicator;	/* Event indicator from reply */
+	u32 data[0];		/* Event data from reply */
+};
+
+/*
+ *	I2O classes which could be handled by the OSM
+ */
+struct i2o_class_id {
+	u16 class_id:12;
+};
+
+/*
+ *	I2O driver structure for OSMs
+ */
+struct i2o_driver {
+	char *name;		/* OSM name */
+	int context;		/* Low 8 bits of the transaction info */
+	struct i2o_class_id *classes;	/* I2O classes that this OSM handles */
+
+	/* Message reply handler */
+	int (*reply) (struct i2o_controller *, u32, struct i2o_message *);
+
+	/* Event handler */
+	work_func_t event;
+
+	struct workqueue_struct *event_queue;	/* Event queue */
+
+	struct device_driver driver;
+
+	/* notification of changes */
+	void (*notify_controller_add) (struct i2o_controller *);
+	void (*notify_controller_remove) (struct i2o_controller *);
+	void (*notify_device_add) (struct i2o_device *);
+	void (*notify_device_remove) (struct i2o_device *);
+
+	struct semaphore lock;
+};
+
+/*
+ *	Contains DMA mapped address information
+ */
+struct i2o_dma {
+	void *virt;
+	dma_addr_t phys;
+	size_t len;
+};
+
+/*
+ *	Contains slab cache and mempool information
+ */
+struct i2o_pool {
+	char *name;
+	struct kmem_cache *slab;
+	mempool_t *mempool;
+};
+
+/*
+ *	Contains IO mapped address information
+ */
+struct i2o_io {
+	void __iomem *virt;
+	unsigned long phys;
+	unsigned long len;
+};
+
+/*
+ *	Context queue entry, used for 32-bit context on 64-bit systems
+ */
+struct i2o_context_list_element {
+	struct list_head list;
+	u32 context;
+	void *ptr;
+	unsigned long timestamp;
+};
+
+/*
+ * Each I2O controller has one of these objects
+ */
+struct i2o_controller {
+	char name[16];
+	int unit;
+	int type;
+
+	struct pci_dev *pdev;	/* PCI device */
+
+	unsigned int promise:1;	/* Promise controller */
+	unsigned int adaptec:1;	/* DPT / Adaptec controller */
+	unsigned int raptor:1;	/* split bar */
+	unsigned int no_quiesce:1;	/* dont quiesce before reset */
+	unsigned int short_req:1;	/* use small block sizes */
+	unsigned int limit_sectors:1;	/* limit number of sectors / request */
+	unsigned int pae_support:1;	/* controller has 64-bit SGL support */
+
+	struct list_head devices;	/* list of I2O devices */
+	struct list_head list;	/* Controller list */
+
+	void __iomem *in_port;	/* Inbout port address */
+	void __iomem *out_port;	/* Outbound port address */
+	void __iomem *irq_status;	/* Interrupt status register address */
+	void __iomem *irq_mask;	/* Interrupt mask register address */
+
+	struct i2o_dma status;	/* IOP status block */
+
+	struct i2o_dma hrt;	/* HW Resource Table */
+	i2o_lct *lct;		/* Logical Config Table */
+	struct i2o_dma dlct;	/* Temp LCT */
+	struct mutex lct_lock;	/* Lock for LCT updates */
+	struct i2o_dma status_block;	/* IOP status block */
+
+	struct i2o_io base;	/* controller messaging unit */
+	struct i2o_io in_queue;	/* inbound message queue Host->IOP */
+	struct i2o_dma out_queue;	/* outbound message queue IOP->Host */
+
+	struct i2o_pool in_msg;	/* mempool for inbound messages */
+
+	unsigned int battery:1;	/* Has a battery backup */
+	unsigned int io_alloc:1;	/* An I/O resource was allocated */
+	unsigned int mem_alloc:1;	/* A memory resource was allocated */
+
+	struct resource io_resource;	/* I/O resource allocated to the IOP */
+	struct resource mem_resource;	/* Mem resource allocated to the IOP */
+
+	struct device device;
+	struct i2o_device *exec;	/* Executive */
+#if BITS_PER_LONG == 64
+	spinlock_t context_list_lock;	/* lock for context_list */
+	atomic_t context_list_counter;	/* needed for unique contexts */
+	struct list_head context_list;	/* list of context id's
+					   and pointers */
+#endif
+	spinlock_t lock;	/* lock for controller
+				   configuration */
+	void *driver_data[I2O_MAX_DRIVERS];	/* storage for drivers */
+};
+
+/*
+ * I2O System table entry
+ *
+ * The system table contains information about all the IOPs in the
+ * system.  It is sent to all IOPs so that they can create peer2peer
+ * connections between them.
+ */
+struct i2o_sys_tbl_entry {
+	u16 org_id;
+	u16 reserved1;
+	u32 iop_id:12;
+	u32 reserved2:20;
+	u16 seg_num:12;
+	u16 i2o_version:4;
+	u8 iop_state;
+	u8 msg_type;
+	u16 frame_size;
+	u16 reserved3;
+	u32 last_changed;
+	u32 iop_capabilities;
+	u32 inbound_low;
+	u32 inbound_high;
+};
+
+struct i2o_sys_tbl {
+	u8 num_entries;
+	u8 version;
+	u16 reserved1;
+	u32 change_ind;
+	u32 reserved2;
+	u32 reserved3;
+	struct i2o_sys_tbl_entry iops[0];
+};
+
+extern struct list_head i2o_controllers;
+
+/* Message functions */
+extern struct i2o_message *i2o_msg_get_wait(struct i2o_controller *, int);
+extern int i2o_msg_post_wait_mem(struct i2o_controller *, struct i2o_message *,
+				 unsigned long, struct i2o_dma *);
+
+/* IOP functions */
+extern int i2o_status_get(struct i2o_controller *);
+
+extern int i2o_event_register(struct i2o_device *, struct i2o_driver *, int,
+			      u32);
+extern struct i2o_device *i2o_iop_find_device(struct i2o_controller *, u16);
+extern struct i2o_controller *i2o_find_iop(int);
+
+/* Functions needed for handling 64-bit pointers in 32-bit context */
+#if BITS_PER_LONG == 64
+extern u32 i2o_cntxt_list_add(struct i2o_controller *, void *);
+extern void *i2o_cntxt_list_get(struct i2o_controller *, u32);
+extern u32 i2o_cntxt_list_remove(struct i2o_controller *, void *);
+extern u32 i2o_cntxt_list_get_ptr(struct i2o_controller *, void *);
+
+static inline u32 i2o_ptr_low(void *ptr)
+{
+	return (u32) (u64) ptr;
+};
+
+static inline u32 i2o_ptr_high(void *ptr)
+{
+	return (u32) ((u64) ptr >> 32);
+};
+
+static inline u32 i2o_dma_low(dma_addr_t dma_addr)
+{
+	return (u32) (u64) dma_addr;
+};
+
+static inline u32 i2o_dma_high(dma_addr_t dma_addr)
+{
+	return (u32) ((u64) dma_addr >> 32);
+};
+#else
+static inline u32 i2o_cntxt_list_add(struct i2o_controller *c, void *ptr)
+{
+	return (u32) ptr;
+};
+
+static inline void *i2o_cntxt_list_get(struct i2o_controller *c, u32 context)
+{
+	return (void *)context;
+};
+
+static inline u32 i2o_cntxt_list_remove(struct i2o_controller *c, void *ptr)
+{
+	return (u32) ptr;
+};
+
+static inline u32 i2o_cntxt_list_get_ptr(struct i2o_controller *c, void *ptr)
+{
+	return (u32) ptr;
+};
+
+static inline u32 i2o_ptr_low(void *ptr)
+{
+	return (u32) ptr;
+};
+
+static inline u32 i2o_ptr_high(void *ptr)
+{
+	return 0;
+};
+
+static inline u32 i2o_dma_low(dma_addr_t dma_addr)
+{
+	return (u32) dma_addr;
+};
+
+static inline u32 i2o_dma_high(dma_addr_t dma_addr)
+{
+	return 0;
+};
+#endif
+
+extern u16 i2o_sg_tablesize(struct i2o_controller *c, u16 body_size);
+extern dma_addr_t i2o_dma_map_single(struct i2o_controller *c, void *ptr,
+					    size_t size,
+					    enum dma_data_direction direction,
+					    u32 ** sg_ptr);
+extern int i2o_dma_map_sg(struct i2o_controller *c,
+				 struct scatterlist *sg, int sg_count,
+				 enum dma_data_direction direction,
+				 u32 ** sg_ptr);
+extern int i2o_dma_alloc(struct device *dev, struct i2o_dma *addr, size_t len);
+extern void i2o_dma_free(struct device *dev, struct i2o_dma *addr);
+extern int i2o_dma_realloc(struct device *dev, struct i2o_dma *addr,
+								size_t len);
+extern int i2o_pool_alloc(struct i2o_pool *pool, const char *name,
+				 size_t size, int min_nr);
+extern void i2o_pool_free(struct i2o_pool *pool);
+/* I2O driver (OSM) functions */
+extern int i2o_driver_register(struct i2o_driver *);
+extern void i2o_driver_unregister(struct i2o_driver *);
+
+/**
+ *	i2o_driver_notify_controller_add - Send notification of added controller
+ *	@drv: I2O driver
+ *	@c: I2O controller
+ *
+ *	Send notification of added controller to a single registered driver.
+ */
+static inline void i2o_driver_notify_controller_add(struct i2o_driver *drv,
+						    struct i2o_controller *c)
+{
+	if (drv->notify_controller_add)
+		drv->notify_controller_add(c);
+};
+
+/**
+ *	i2o_driver_notify_controller_remove - Send notification of removed controller
+ *	@drv: I2O driver
+ *	@c: I2O controller
+ *
+ *	Send notification of removed controller to a single registered driver.
+ */
+static inline void i2o_driver_notify_controller_remove(struct i2o_driver *drv,
+						       struct i2o_controller *c)
+{
+	if (drv->notify_controller_remove)
+		drv->notify_controller_remove(c);
+};
+
+/**
+ *	i2o_driver_notify_device_add - Send notification of added device
+ *	@drv: I2O driver
+ *	@i2o_dev: the added i2o_device
+ *
+ *	Send notification of added device to a single registered driver.
+ */
+static inline void i2o_driver_notify_device_add(struct i2o_driver *drv,
+						struct i2o_device *i2o_dev)
+{
+	if (drv->notify_device_add)
+		drv->notify_device_add(i2o_dev);
+};
+
+/**
+ *	i2o_driver_notify_device_remove - Send notification of removed device
+ *	@drv: I2O driver
+ *	@i2o_dev: the added i2o_device
+ *
+ *	Send notification of removed device to a single registered driver.
+ */
+static inline void i2o_driver_notify_device_remove(struct i2o_driver *drv,
+						   struct i2o_device *i2o_dev)
+{
+	if (drv->notify_device_remove)
+		drv->notify_device_remove(i2o_dev);
+};
+
+extern void i2o_driver_notify_controller_add_all(struct i2o_controller *);
+extern void i2o_driver_notify_controller_remove_all(struct i2o_controller *);
+extern void i2o_driver_notify_device_add_all(struct i2o_device *);
+extern void i2o_driver_notify_device_remove_all(struct i2o_device *);
+
+/* I2O device functions */
+extern int i2o_device_claim(struct i2o_device *);
+extern int i2o_device_claim_release(struct i2o_device *);
+
+/* Exec OSM functions */
+extern int i2o_exec_lct_get(struct i2o_controller *);
+
+/* device / driver / kobject conversion functions */
+#define to_i2o_driver(drv) container_of(drv,struct i2o_driver, driver)
+#define to_i2o_device(dev) container_of(dev, struct i2o_device, device)
+#define to_i2o_controller(dev) container_of(dev, struct i2o_controller, device)
+
+/**
+ *	i2o_out_to_virt - Turn an I2O message to a virtual address
+ *	@c: controller
+ *	@m: message engine value
+ *
+ *	Turn a receive message from an I2O controller bus address into
+ *	a Linux virtual address. The shared page frame is a linear block
+ *	so we simply have to shift the offset. This function does not
+ *	work for sender side messages as they are ioremap objects
+ *	provided by the I2O controller.
+ */
+static inline struct i2o_message *i2o_msg_out_to_virt(struct i2o_controller *c,
+						      u32 m)
+{
+	BUG_ON(m < c->out_queue.phys
+	       || m >= c->out_queue.phys + c->out_queue.len);
+
+	return c->out_queue.virt + (m - c->out_queue.phys);
+};
+
+/**
+ *	i2o_msg_in_to_virt - Turn an I2O message to a virtual address
+ *	@c: controller
+ *	@m: message engine value
+ *
+ *	Turn a send message from an I2O controller bus address into
+ *	a Linux virtual address. The shared page frame is a linear block
+ *	so we simply have to shift the offset. This function does not
+ *	work for receive side messages as they are kmalloc objects
+ *	in a different pool.
+ */
+static inline struct i2o_message __iomem *i2o_msg_in_to_virt(struct
+							     i2o_controller *c,
+							     u32 m)
+{
+	return c->in_queue.virt + m;
+};
+
+/**
+ *	i2o_msg_get - obtain an I2O message from the IOP
+ *	@c: I2O controller
+ *
+ *	This function tries to get a message frame. If no message frame is
+ *	available do not wait until one is available (see also i2o_msg_get_wait).
+ *	The returned pointer to the message frame is not in I/O memory, it is
+ *	allocated from a mempool. But because a MFA is allocated from the
+ *	controller too it is guaranteed that i2o_msg_post() will never fail.
+ *
+ *	On a success a pointer to the message frame is returned. If the message
+ *	queue is empty -EBUSY is returned and if no memory is available -ENOMEM
+ *	is returned.
+ */
+static inline struct i2o_message *i2o_msg_get(struct i2o_controller *c)
+{
+	struct i2o_msg_mfa *mmsg = mempool_alloc(c->in_msg.mempool, GFP_ATOMIC);
+	if (!mmsg)
+		return ERR_PTR(-ENOMEM);
+
+	mmsg->mfa = readl(c->in_port);
+	if (unlikely(mmsg->mfa >= c->in_queue.len)) {
+		u32 mfa = mmsg->mfa;
+
+		mempool_free(mmsg, c->in_msg.mempool);
+
+		if (mfa == I2O_QUEUE_EMPTY)
+			return ERR_PTR(-EBUSY);
+		return ERR_PTR(-EFAULT);
+	}
+
+	return &mmsg->msg;
+};
+
+/**
+ *	i2o_msg_post - Post I2O message to I2O controller
+ *	@c: I2O controller to which the message should be send
+ *	@msg: message returned by i2o_msg_get()
+ *
+ *	Post the message to the I2O controller and return immediately.
+ */
+static inline void i2o_msg_post(struct i2o_controller *c,
+				struct i2o_message *msg)
+{
+	struct i2o_msg_mfa *mmsg;
+
+	mmsg = container_of(msg, struct i2o_msg_mfa, msg);
+	memcpy_toio(i2o_msg_in_to_virt(c, mmsg->mfa), msg,
+		    (le32_to_cpu(msg->u.head[0]) >> 16) << 2);
+	writel(mmsg->mfa, c->in_port);
+	mempool_free(mmsg, c->in_msg.mempool);
+};
+
+/**
+ * 	i2o_msg_post_wait - Post and wait a message and wait until return
+ *	@c: controller
+ *	@msg: message to post
+ *	@timeout: time in seconds to wait
+ *
+ * 	This API allows an OSM to post a message and then be told whether or
+ *	not the system received a successful reply. If the message times out
+ *	then the value '-ETIMEDOUT' is returned.
+ *
+ *	Returns 0 on success or negative error code on failure.
+ */
+static inline int i2o_msg_post_wait(struct i2o_controller *c,
+				    struct i2o_message *msg,
+				    unsigned long timeout)
+{
+	return i2o_msg_post_wait_mem(c, msg, timeout, NULL);
+};
+
+/**
+ *	i2o_msg_nop_mfa - Returns a fetched MFA back to the controller
+ *	@c: I2O controller from which the MFA was fetched
+ *	@mfa: MFA which should be returned
+ *
+ *	This function must be used for preserved messages, because i2o_msg_nop()
+ *	also returns the allocated memory back to the msg_pool mempool.
+ */
+static inline void i2o_msg_nop_mfa(struct i2o_controller *c, u32 mfa)
+{
+	struct i2o_message __iomem *msg;
+	u32 nop[3] = {
+		THREE_WORD_MSG_SIZE | SGL_OFFSET_0,
+		I2O_CMD_UTIL_NOP << 24 | HOST_TID << 12 | ADAPTER_TID,
+		0x00000000
+	};
+
+	msg = i2o_msg_in_to_virt(c, mfa);
+	memcpy_toio(msg, nop, sizeof(nop));
+	writel(mfa, c->in_port);
+};
+
+/**
+ *	i2o_msg_nop - Returns a message which is not used
+ *	@c: I2O controller from which the message was created
+ *	@msg: message which should be returned
+ *
+ *	If you fetch a message via i2o_msg_get, and can't use it, you must
+ *	return the message with this function. Otherwise the MFA is lost as well
+ *	as the allocated memory from the mempool.
+ */
+static inline void i2o_msg_nop(struct i2o_controller *c,
+			       struct i2o_message *msg)
+{
+	struct i2o_msg_mfa *mmsg;
+	mmsg = container_of(msg, struct i2o_msg_mfa, msg);
+
+	i2o_msg_nop_mfa(c, mmsg->mfa);
+	mempool_free(mmsg, c->in_msg.mempool);
+};
+
+/**
+ *	i2o_flush_reply - Flush reply from I2O controller
+ *	@c: I2O controller
+ *	@m: the message identifier
+ *
+ *	The I2O controller must be informed that the reply message is not needed
+ *	anymore. If you forget to flush the reply, the message frame can't be
+ *	used by the controller anymore and is therefore lost.
+ */
+static inline void i2o_flush_reply(struct i2o_controller *c, u32 m)
+{
+	writel(m, c->out_port);
+};
+
+/*
+ *	Endian handling wrapped into the macro - keeps the core code
+ *	cleaner.
+ */
+
+#define i2o_raw_writel(val, mem)	__raw_writel(cpu_to_le32(val), mem)
+
+extern int i2o_parm_field_get(struct i2o_device *, int, int, void *, int);
+extern int i2o_parm_table_get(struct i2o_device *, int, int, int, void *, int,
+			      void *, int);
+
+/* debugging and troubleshooting/diagnostic helpers. */
+#define osm_printk(level, format, arg...)  \
+	printk(level "%s: " format, OSM_NAME , ## arg)
+
+#ifdef DEBUG
+#define osm_debug(format, arg...) \
+	osm_printk(KERN_DEBUG, format , ## arg)
+#else
+#define osm_debug(format, arg...) \
+        do { } while (0)
+#endif
+
+#define osm_err(format, arg...)		\
+	osm_printk(KERN_ERR, format , ## arg)
+#define osm_info(format, arg...)		\
+	osm_printk(KERN_INFO, format , ## arg)
+#define osm_warn(format, arg...)		\
+	osm_printk(KERN_WARNING, format , ## arg)
+
+/* debugging functions */
+extern void i2o_report_status(const char *, const char *, struct i2o_message *);
+extern void i2o_dump_message(struct i2o_message *);
+extern void i2o_dump_hrt(struct i2o_controller *c);
+extern void i2o_debug_state(struct i2o_controller *c);
+
+#endif				/* _I2O_H */
diff --git a/include/linux/i7300_idle.h b/include/linux/i7300_idle.h
new file mode 100644
index 00000000..1587b7de
--- /dev/null
+++ b/include/linux/i7300_idle.h
@@ -0,0 +1,83 @@
+
+#ifndef I7300_IDLE_H
+#define I7300_IDLE_H
+
+#include <linux/pci.h>
+
+/*
+ * I/O AT controls (PCI bus 0 device 8 function 0)
+ * DIMM controls (PCI bus 0 device 16 function 1)
+ */
+#define IOAT_BUS 0
+#define IOAT_DEVFN PCI_DEVFN(8, 0)
+#define MEMCTL_BUS 0
+#define MEMCTL_DEVFN PCI_DEVFN(16, 1)
+
+struct fbd_ioat {
+	unsigned int vendor;
+	unsigned int ioat_dev;
+	unsigned int enabled;
+};
+
+/*
+ * The i5000 chip-set has the same hooks as the i7300
+ * but it is not enabled by default and must be manually
+ * manually enabled with "forceload=1" because it is
+ * only lightly validated.
+ */
+
+static const struct fbd_ioat fbd_ioat_list[] = {
+	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB, 1},
+	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT, 0},
+	{0, 0}
+};
+
+/* table of devices that work with this driver */
+static const struct pci_device_id pci_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_FBD_CNB) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) },
+	{ } /* Terminating entry */
+};
+
+/* Check for known platforms with I/O-AT */
+static inline int i7300_idle_platform_probe(struct pci_dev **fbd_dev,
+						struct pci_dev **ioat_dev,
+						int enable_all)
+{
+	int i;
+	struct pci_dev *memdev, *dmadev;
+
+	memdev = pci_get_bus_and_slot(MEMCTL_BUS, MEMCTL_DEVFN);
+	if (!memdev)
+		return -ENODEV;
+
+	for (i = 0; pci_tbl[i].vendor != 0; i++) {
+		if (memdev->vendor == pci_tbl[i].vendor &&
+		    memdev->device == pci_tbl[i].device) {
+			break;
+		}
+	}
+	if (pci_tbl[i].vendor == 0)
+		return -ENODEV;
+
+	dmadev = pci_get_bus_and_slot(IOAT_BUS, IOAT_DEVFN);
+	if (!dmadev)
+		return -ENODEV;
+
+	for (i = 0; fbd_ioat_list[i].vendor != 0; i++) {
+		if (dmadev->vendor == fbd_ioat_list[i].vendor &&
+		    dmadev->device == fbd_ioat_list[i].ioat_dev) {
+			if (!(fbd_ioat_list[i].enabled || enable_all))
+				continue;
+			if (fbd_dev)
+				*fbd_dev = memdev;
+			if (ioat_dev)
+				*ioat_dev = dmadev;
+
+			return 0;
+		}
+	}
+	return -ENODEV;
+}
+
+#endif
diff --git a/include/linux/i8042.h b/include/linux/i8042.h
new file mode 100644
index 00000000..a986ff58
--- /dev/null
+++ b/include/linux/i8042.h
@@ -0,0 +1,81 @@
+#ifndef _LINUX_I8042_H
+#define _LINUX_I8042_H
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+
+/*
+ * Standard commands.
+ */
+
+#define I8042_CMD_CTL_RCTR	0x0120
+#define I8042_CMD_CTL_WCTR	0x1060
+#define I8042_CMD_CTL_TEST	0x01aa
+
+#define I8042_CMD_KBD_DISABLE	0x00ad
+#define I8042_CMD_KBD_ENABLE	0x00ae
+#define I8042_CMD_KBD_TEST	0x01ab
+#define I8042_CMD_KBD_LOOP	0x11d2
+
+#define I8042_CMD_AUX_DISABLE	0x00a7
+#define I8042_CMD_AUX_ENABLE	0x00a8
+#define I8042_CMD_AUX_TEST	0x01a9
+#define I8042_CMD_AUX_SEND	0x10d4
+#define I8042_CMD_AUX_LOOP	0x11d3
+
+#define I8042_CMD_MUX_PFX	0x0090
+#define I8042_CMD_MUX_SEND	0x1090
+
+struct serio;
+
+#if defined(CONFIG_SERIO_I8042) || defined(CONFIG_SERIO_I8042_MODULE)
+
+void i8042_lock_chip(void);
+void i8042_unlock_chip(void);
+int i8042_command(unsigned char *param, int command);
+bool i8042_check_port_owner(const struct serio *);
+int i8042_install_filter(bool (*filter)(unsigned char data, unsigned char str,
+					struct serio *serio));
+int i8042_remove_filter(bool (*filter)(unsigned char data, unsigned char str,
+				       struct serio *serio));
+
+#else
+
+static inline void i8042_lock_chip(void)
+{
+}
+
+static inline void i8042_unlock_chip(void)
+{
+}
+
+static inline int i8042_command(unsigned char *param, int command)
+{
+	return -ENODEV;
+}
+
+static inline bool i8042_check_port_owner(const struct serio *serio)
+{
+	return false;
+}
+
+static inline int i8042_install_filter(bool (*filter)(unsigned char data, unsigned char str,
+					struct serio *serio))
+{
+	return -ENODEV;
+}
+
+static inline int i8042_remove_filter(bool (*filter)(unsigned char data, unsigned char str,
+				       struct serio *serio))
+{
+	return -ENODEV;
+}
+
+#endif
+
+#endif
diff --git a/include/linux/i8253.h b/include/linux/i8253.h
new file mode 100644
index 00000000..e6bb36a9
--- /dev/null
+++ b/include/linux/i8253.h
@@ -0,0 +1,29 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ *  Machine specific IO port address definition for generic.
+ *  Written by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef __LINUX_I8253_H
+#define __LINUX_I8253_H
+
+#include <linux/param.h>
+#include <linux/spinlock.h>
+#include <linux/timex.h>
+
+/* i8253A PIT registers */
+#define PIT_MODE	0x43
+#define PIT_CH0		0x40
+#define PIT_CH2		0x42
+
+#define PIT_LATCH	((PIT_TICK_RATE + HZ/2) / HZ)
+
+extern raw_spinlock_t i8253_lock;
+extern struct clock_event_device i8253_clockevent;
+extern void clockevent_i8253_init(bool oneshot);
+
+extern void setup_pit_timer(void);
+
+#endif /* __LINUX_I8253_H */
diff --git a/include/linux/i82593.h b/include/linux/i82593.h
new file mode 100644
index 00000000..afac5c7a
--- /dev/null
+++ b/include/linux/i82593.h
@@ -0,0 +1,229 @@
+/*
+ * Definitions for Intel 82593 CSMA/CD Core LAN Controller
+ * The definitions are taken from the 1992 users manual with Intel
+ * order number 297125-001.
+ *
+ * /usr/src/pc/RCS/i82593.h,v 1.1 1996/07/17 15:23:12 root Exp
+ *
+ * Copyright 1994, Anders Klemets <klemets@it.kth.se>
+ *
+ * HISTORY
+ * i82593.h,v
+ * Revision 1.4  2005/11/4  09:15:00  baroniunas
+ * Modified copyright with permission of author as follows:
+ *
+ *   "If I82539.H is the only file with my copyright statement
+ *    that is included in the Source Forge project, then you have
+ *    my approval to change the copyright statement to be a GPL
+ *    license, in the way you proposed on October 10."
+ *
+ * Revision 1.1  1996/07/17 15:23:12  root
+ * Initial revision
+ *
+ * Revision 1.3  1995/04/05  15:13:58  adj
+ * Initial alpha release
+ *
+ * Revision 1.2  1994/06/16  23:57:31  klemets
+ * Mirrored all the fields in the configuration block.
+ *
+ * Revision 1.1  1994/06/02  20:25:34  klemets
+ * Initial revision
+ *
+ *
+ */
+#ifndef	_I82593_H
+#define	_I82593_H
+
+/* Intel 82593 CSMA/CD Core LAN Controller */
+
+/* Port 0 Command Register definitions */
+
+/* Execution operations */
+#define OP0_NOP			0	/* CHNL = 0 */
+#define OP0_SWIT_TO_PORT_1	0	/* CHNL = 1 */
+#define OP0_IA_SETUP		1
+#define OP0_CONFIGURE		2
+#define OP0_MC_SETUP		3
+#define OP0_TRANSMIT		4
+#define OP0_TDR			5
+#define OP0_DUMP		6
+#define OP0_DIAGNOSE		7
+#define OP0_TRANSMIT_NO_CRC	9
+#define OP0_RETRANSMIT		12
+#define OP0_ABORT		13
+/* Reception operations */
+#define OP0_RCV_ENABLE		8
+#define OP0_RCV_DISABLE		10
+#define OP0_STOP_RCV		11
+/* Status pointer control operations */
+#define OP0_FIX_PTR		15	/* CHNL = 1 */
+#define OP0_RLS_PTR		15	/* CHNL = 0 */
+#define OP0_RESET		14
+
+#define CR0_CHNL		(1 << 4)	/* 0=Channel 0, 1=Channel 1 */
+#define CR0_STATUS_0		0x00
+#define CR0_STATUS_1		0x20
+#define CR0_STATUS_2		0x40
+#define CR0_STATUS_3		0x60
+#define CR0_INT_ACK		(1 << 7)	/* 0=No ack, 1=acknowledge */
+
+/* Port 0 Status Register definitions */
+
+#define SR0_NO_RESULT		0		/* dummy */
+#define SR0_EVENT_MASK		0x0f
+#define SR0_IA_SETUP_DONE	1
+#define SR0_CONFIGURE_DONE	2
+#define SR0_MC_SETUP_DONE	3
+#define SR0_TRANSMIT_DONE	4
+#define SR0_TDR_DONE		5
+#define SR0_DUMP_DONE		6
+#define SR0_DIAGNOSE_PASSED	7
+#define SR0_TRANSMIT_NO_CRC_DONE 9
+#define SR0_RETRANSMIT_DONE	12
+#define SR0_EXECUTION_ABORTED	13
+#define SR0_END_OF_FRAME	8
+#define SR0_RECEPTION_ABORTED	10
+#define SR0_DIAGNOSE_FAILED	15
+#define SR0_STOP_REG_HIT	11
+
+#define SR0_CHNL		(1 << 4)
+#define SR0_EXECUTION		(1 << 5)
+#define SR0_RECEPTION		(1 << 6)
+#define SR0_INTERRUPT		(1 << 7)
+#define SR0_BOTH_RX_TX		(SR0_EXECUTION | SR0_RECEPTION)
+
+#define SR3_EXEC_STATE_MASK	0x03
+#define SR3_EXEC_IDLE		0
+#define SR3_TX_ABORT_IN_PROGRESS 1
+#define SR3_EXEC_ACTIVE		2
+#define SR3_ABORT_IN_PROGRESS	3
+#define SR3_EXEC_CHNL		(1 << 2)
+#define SR3_STP_ON_NO_RSRC	(1 << 3)
+#define SR3_RCVING_NO_RSRC	(1 << 4)
+#define SR3_RCV_STATE_MASK	0x60
+#define SR3_RCV_IDLE		0x00
+#define SR3_RCV_READY		0x20
+#define SR3_RCV_ACTIVE		0x40
+#define SR3_RCV_STOP_IN_PROG	0x60
+#define SR3_RCV_CHNL		(1 << 7)
+
+/* Port 1 Command Register definitions */
+
+#define OP1_NOP			0
+#define OP1_SWIT_TO_PORT_0	1
+#define OP1_INT_DISABLE		2
+#define OP1_INT_ENABLE		3
+#define OP1_SET_TS		5
+#define OP1_RST_TS		7
+#define OP1_POWER_DOWN		8
+#define OP1_RESET_RING_MNGMT	11
+#define OP1_RESET		14
+#define OP1_SEL_RST		15
+
+#define CR1_STATUS_4		0x00
+#define CR1_STATUS_5		0x20
+#define CR1_STATUS_6		0x40
+#define CR1_STOP_REG_UPDATE	(1 << 7)
+
+/* Receive frame status bits */
+
+#define	RX_RCLD			(1 << 0)
+#define RX_IA_MATCH		(1 << 1)
+#define	RX_NO_AD_MATCH		(1 << 2)
+#define RX_NO_SFD		(1 << 3)
+#define RX_SRT_FRM		(1 << 7)
+#define RX_OVRRUN		(1 << 8)
+#define RX_ALG_ERR		(1 << 10)
+#define RX_CRC_ERR		(1 << 11)
+#define RX_LEN_ERR		(1 << 12)
+#define RX_RCV_OK		(1 << 13)
+#define RX_TYP_LEN		(1 << 15)
+
+/* Transmit status bits */
+
+#define TX_NCOL_MASK		0x0f
+#define TX_FRTL			(1 << 4)
+#define TX_MAX_COL		(1 << 5)
+#define TX_HRT_BEAT		(1 << 6)
+#define TX_DEFER		(1 << 7)
+#define TX_UND_RUN		(1 << 8)
+#define TX_LOST_CTS		(1 << 9)
+#define TX_LOST_CRS		(1 << 10)
+#define TX_LTCOL		(1 << 11)
+#define TX_OK			(1 << 13)
+#define TX_COLL			(1 << 15)
+
+struct i82593_conf_block {
+  u_char fifo_limit : 4,
+  	 forgnesi   : 1,
+  	 fifo_32    : 1,
+  	 d6mod      : 1,
+  	 throttle_enb : 1;
+  u_char throttle   : 6,
+	 cntrxint   : 1,
+	 contin	    : 1;
+  u_char addr_len   : 3,
+  	 acloc 	    : 1,
+ 	 preamb_len : 2,
+  	 loopback   : 2;
+  u_char lin_prio   : 3,
+	 tbofstop   : 1,
+	 exp_prio   : 3,
+	 bof_met    : 1;
+  u_char	    : 4,
+	 ifrm_spc   : 4;
+  u_char	    : 5,
+	 slottim_low : 3;
+  u_char slottim_hi : 3,
+		    : 1,
+	 max_retr   : 4;
+  u_char prmisc     : 1,
+	 bc_dis     : 1,
+  		    : 1,
+	 crs_1	    : 1,
+	 nocrc_ins  : 1,
+	 crc_1632   : 1,
+  	 	    : 1,
+  	 crs_cdt    : 1;
+  u_char cs_filter  : 3,
+	 crs_src    : 1,
+	 cd_filter  : 3,
+		    : 1;
+  u_char	    : 2,
+  	 min_fr_len : 6;
+  u_char lng_typ    : 1,
+	 lng_fld    : 1,
+	 rxcrc_xf   : 1,
+	 artx	    : 1,
+	 sarec	    : 1,
+	 tx_jabber  : 1,	/* why is this called max_len in the manual? */
+	 hash_1	    : 1,
+  	 lbpkpol    : 1;
+  u_char	    : 6,
+  	 fdx	    : 1,
+  	  	    : 1;
+  u_char dummy_6    : 6,	/* supposed to be ones */
+  	 mult_ia    : 1,
+  	 dis_bof    : 1;
+  u_char dummy_1    : 1,	/* supposed to be one */
+	 tx_ifs_retrig : 2,
+	 mc_all     : 1,
+	 rcv_mon    : 2,
+	 frag_acpt  : 1,
+  	 tstrttrs   : 1;
+  u_char fretx	    : 1,
+	 runt_eop   : 1,
+	 hw_sw_pin  : 1,
+	 big_endn   : 1,
+	 syncrqs    : 1,
+	 sttlen     : 1,
+	 tx_eop     : 1,
+  	 rx_eop	    : 1;
+  u_char rbuf_size  : 5,
+	 rcvstop    : 1,
+  	 	    : 2;
+};
+
+#define I82593_MAX_MULTICAST_ADDRESSES	128	/* Hardware hashed filter */
+
+#endif /* _I82593_H */
diff --git a/include/linux/i8k.h b/include/linux/i8k.h
new file mode 100644
index 00000000..1c45ba50
--- /dev/null
+++ b/include/linux/i8k.h
@@ -0,0 +1,46 @@
+/*
+ * i8k.h -- Linux driver for accessing the SMM BIOS on Dell laptops
+ *
+ * Copyright (C) 2001  Massimo Dal Zotto <dz@debian.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef _LINUX_I8K_H
+#define _LINUX_I8K_H
+
+#define I8K_PROC		"/proc/i8k"
+#define I8K_PROC_FMT		"1.0"
+
+#define I8K_BIOS_VERSION	_IOR ('i', 0x80, int)	/* broken: meant 4 bytes */
+#define I8K_MACHINE_ID		_IOR ('i', 0x81, int)	/* broken: meant 16 bytes */
+#define I8K_POWER_STATUS	_IOR ('i', 0x82, size_t)
+#define I8K_FN_STATUS		_IOR ('i', 0x83, size_t)
+#define I8K_GET_TEMP		_IOR ('i', 0x84, size_t)
+#define I8K_GET_SPEED		_IOWR('i', 0x85, size_t)
+#define I8K_GET_FAN		_IOWR('i', 0x86, size_t)
+#define I8K_SET_FAN		_IOWR('i', 0x87, size_t)
+
+#define I8K_FAN_LEFT		1
+#define I8K_FAN_RIGHT		0
+#define I8K_FAN_OFF		0
+#define I8K_FAN_LOW		1
+#define I8K_FAN_HIGH		2
+#define I8K_FAN_MAX		I8K_FAN_HIGH
+
+#define I8K_VOL_UP		1
+#define I8K_VOL_DOWN		2
+#define I8K_VOL_MUTE		4
+
+#define I8K_AC			1
+#define I8K_BATTERY		0
+
+#endif
diff --git a/include/linux/ibmtr.h b/include/linux/ibmtr.h
new file mode 100644
index 00000000..06695b74
--- /dev/null
+++ b/include/linux/ibmtr.h
@@ -0,0 +1,373 @@
+#ifndef __LINUX_IBMTR_H__
+#define __LINUX_IBMTR_H__
+
+/* Definitions for an IBM Token Ring card. */
+/* This file is distributed under the GNU GPL   */
+
+/* ported to the Alpha architecture 02/20/96 (just used the HZ macro) */
+
+#define TR_RETRY_INTERVAL	(30*HZ)	/* 500 on PC = 5 s */
+#define TR_RST_TIME		(msecs_to_jiffies(50))	/* 5 on PC = 50 ms */
+#define TR_BUSY_INTERVAL	(msecs_to_jiffies(200))	/* 5 on PC = 200 ms */
+#define TR_SPIN_INTERVAL	(3*HZ)	/* 3 seconds before init timeout */
+
+#define TR_ISA 1
+#define TR_MCA 2
+#define TR_ISAPNP 3
+#define NOTOK 0
+
+#define IBMTR_SHARED_RAM_SIZE 0x10000
+#define IBMTR_IO_EXTENT 4
+#define IBMTR_MAX_ADAPTERS 4
+
+#define CHANNEL_ID      0X1F30
+#define AIP             0X1F00
+#define AIPADAPTYPE     0X1FA0
+#define AIPDATARATE     0X1FA2
+#define AIPEARLYTOKEN   0X1FA4
+#define AIPAVAILSHRAM   0X1FA6
+#define AIPSHRAMPAGE    0X1FA8
+#define AIP4MBDHB       0X1FAA
+#define AIP16MBDHB      0X1FAC
+#define AIPFID		0X1FBA
+
+#define ADAPTRESET      0x1     /* Control Adapter reset (add to base) */
+#define ADAPTRESETREL   0x2     /* Release Adapter from reset ( """)  */
+#define ADAPTINTREL	0x3 	/* Adapter interrupt release */
+
+#define GLOBAL_INT_ENABLE 0x02f0
+
+/* MMIO bits 0-4 select register */
+#define RRR_EVEN       0x00 /* Shared RAM relocation registers - even and odd */
+/* Used to set the starting address of shared RAM  */
+/* Bits 1 through 7 of this register map to bits 13 through 19 of the shared
+   RAM address.*/
+/* ie: 0x02 sets RAM address to ...ato!  issy su wazzoo !! GODZILLA!!! */
+#define RRR_ODD         0x01
+/* Bits 2 and 3 of this register can be read to determine shared RAM size */
+/* 00 for 8k, 01 for 16k, 10 for 32k, 11 for 64k  */
+#define WRBR_EVEN       0x02    /* Write region base registers - even and odd */
+#define WRBR_ODD        0x03
+#define WWOR_EVEN       0x04    /* Write window open registers - even and odd */
+#define WWOR_ODD        0x05
+#define WWCR_EVEN       0x06   /* Write window close registers - even and odd */
+#define WWCR_ODD        0x07
+
+/* Interrupt status registers - PC system  - even and odd */
+#define ISRP_EVEN       0x08
+
+#define TCR_INT    0x10    /* Bit 4 - Timer interrupt.  The TVR_EVEN timer has
+                                                                   expired. */
+#define ERR_INT	   0x08    /* Bit 3 - Error interrupt.  The adapter has had an
+                                                            internal error. */
+#define ACCESS_INT 0x04    /* Bit 2 - Access interrupt.  You have attempted to
+				      write to an invalid area of shared RAM
+				      or an invalid register within the MMIO. */
+/* In addition, the following bits within ISRP_EVEN can be turned on or off   */
+/* by you to control the interrupt processing:   */
+#define INT_ENABLE 0x40 /* Bit 6 - Interrupt enable.  If 0, no interrupts will
+                                   occur.  If 1, interrupts will occur normally.
+                                                         Normally set to 1.  */
+/* Bit 0 - Primary or alternate adapter.  Set to zero if this adapter is the
+		primary adapter, 1 if this adapter is the alternate adapter. */
+
+
+#define ISRP_ODD        0x09
+
+#define ADAP_CHK_INT 0x40 /* Bit 6 - Adapter check.  the adapter has
+                             encountered a serious problem and has closed
+                             itself.  Whoa.  */
+#define SRB_RESP_INT 0x20 /* Bit 5 - SRB response.  The adapter has accepted
+                             an SRB request and set the return code within
+                             the SRB. */
+#define ASB_FREE_INT 0x10 /* Bit 4 - ASB free.  The adapter has read the ASB
+                             and this area can be safely reused. This interrupt
+                             is only used if your application has set the ASB
+                             free request bit in ISRA_ODD or if an error was
+                             detected in your response. */
+#define ARB_CMD_INT  0x08 /* Bit 3 - ARB command.  The adapter has given you a
+                             command for action.  The command is located in the
+                             ARB area of shared memory. */
+#define SSB_RESP_INT 0x04 /* Bit 2 - SSB response.  The adapter has posted a
+                             response to your SRB (the response is located in
+                             the SSB area of shared memory). */
+/* Bit 1 - Bridge frame forward complete. */
+
+
+
+#define ISRA_EVEN 0x0A /*Interrupt status registers - adapter  - even and odd */
+/* Bit 7 - Internal parity error (on adapter's internal bus) */
+/* Bit 6 - Timer interrupt pending */
+/* Bit 5 - Access interrupt (attempt by adapter to access illegal address) */
+/* Bit 4 - Adapter microcode problem (microcode dead-man timer expired) */
+/* Bit 3 - Adapter processor check status */
+/* Bit 2 - Reserved */
+/* Bit 1 - Adapter hardware interrupt mask (prevents internal interrupts) */
+/* Bit 0 - Adapter software interrupt mask (prevents internal software ints) */
+
+#define ISRA_ODD        0x0B
+#define CMD_IN_SRB  0x20 /* Bit 5  - Indicates that you have placed a new
+                           command in the SRB and are ready for the adapter to
+                           process the command. */
+#define RESP_IN_ASB 0x10 /* Bit 4 - Indicates that you have placed a response
+                            (an ASB) in the shared RAM which is available for
+                            the adapter's use. */
+/* Bit 3 - Indicates that you are ready to put an SRB in the shared RAM, but
+	that a previous command is still pending.  The adapter will then
+	interrupt you when the previous command is completed */
+/* Bit 2 - Indicates that you are ready to put an ASB in the shared RAM, but
+	that a previous ASB is still pending.  The adapter will then interrupt
+	you when the previous ASB is copied.  */
+#define ARB_FREE 0x2
+#define SSB_FREE 0x1
+
+#define TCR_EVEN        0x0C    /* Timer control registers - even and odd */
+#define TCR_ODD         0x0D
+#define TVR_EVEN        0x0E    /* Timer value registers - even and odd */
+#define TVR_ODD         0x0F
+#define SRPR_EVEN       0x18    /* Shared RAM paging registers - even and odd */
+#define SRPR_ENABLE_PAGING 0xc0
+#define SRPR_ODD        0x19	/* Not used. */
+#define TOKREAD         0x60
+#define TOKOR           0x40
+#define TOKAND          0x20
+#define TOKWRITE        0x00
+
+/* MMIO bits 5-6 select operation */
+/* 00 is used to write to a register */
+/* 01 is used to bitwise AND a byte with a register */
+/* 10 is used to bitwise OR a byte with a register  */
+/* 11 is used to read from a register */
+
+/* MMIO bits 7-8 select area of interest.. see below */
+/* 00 selects attachment control area. */
+/* 01 is reserved. */
+/* 10 selects adapter identification area A containing the adapter encoded
+	address. */
+/* 11 selects the adapter identification area B containing test patterns. */
+
+#define PCCHANNELID 5049434F3631313039393020
+#define MCCHANNELID 4D4152533633583435313820
+
+#define ACA_OFFSET 0x1e00
+#define ACA_SET 0x40
+#define ACA_RESET 0x20
+#define ACA_RW 0x00
+
+#ifdef ENABLE_PAGING
+#define SET_PAGE(x) (writeb((x), ti->mmio + ACA_OFFSET+ ACA_RW + SRPR_EVEN))
+#else
+#define SET_PAGE(x)
+#endif
+
+/* do_tok_int possible values */
+#define FIRST_INT 1
+#define NOT_FIRST 2
+
+typedef enum {	CLOSED,	OPEN } open_state;
+//staic const char *printstate[] = { "CLOSED","OPEN"};
+
+struct tok_info {
+	unsigned char irq;
+	void __iomem *mmio;
+	unsigned char hw_address[32];
+	unsigned char adapter_type;
+	unsigned char data_rate;
+	unsigned char token_release;
+	unsigned char avail_shared_ram;
+	unsigned char shared_ram_paging;
+        unsigned char turbo;
+	unsigned short dhb_size4mb;
+	unsigned short rbuf_len4;
+	unsigned short rbuf_cnt4;
+	unsigned short maxmtu4;
+	unsigned short dhb_size16mb;
+	unsigned short rbuf_len16;
+	unsigned short rbuf_cnt16;
+	unsigned short maxmtu16;
+	/* Additions by David Morris       */
+	unsigned char do_tok_int;
+	wait_queue_head_t wait_for_reset;
+	unsigned char sram_base;
+	/* Additions by Peter De Schrijver */
+	unsigned char page_mask;          /* mask to select RAM page to Map*/
+	unsigned char mapped_ram_size;    /* size of RAM page */
+	__u32 sram_phys;          /* Shared memory base address */
+	void __iomem *sram_virt;          /* Shared memory base address */
+	void __iomem *init_srb;   /* Initial System Request Block address */
+	void __iomem *srb;                /* System Request Block address */
+	void __iomem *ssb;                /* System Status Block address */
+	void __iomem *arb;                /* Adapter Request Block address */
+	void __iomem *asb;                /* Adapter Status Block address */
+        __u8  init_srb_page;
+        __u8  srb_page;
+        __u8  ssb_page;
+        __u8  arb_page;
+        __u8  asb_page;
+	unsigned short exsap_station_id;
+	unsigned short global_int_enable;
+	struct sk_buff *current_skb;
+
+	unsigned char auto_speedsave;
+	open_state			open_status, sap_status;
+	enum {MANUAL, AUTOMATIC}	open_mode;
+	enum {FAIL, RESTART, REOPEN}	open_action;
+	enum {NO, YES}			open_failure;
+	unsigned char readlog_pending;
+	unsigned short adapter_int_enable; /* Adapter-specific int enable */
+        struct timer_list tr_timer;
+	unsigned char ring_speed;
+	spinlock_t lock;		/* SMP protection */
+};
+
+/* token ring adapter commands */
+#define DIR_INTERRUPT 		0x00 /* struct srb_interrupt */
+#define DIR_MOD_OPEN_PARAMS 	0x01
+#define DIR_OPEN_ADAPTER 	0x03 /* struct dir_open_adapter */
+#define DIR_CLOSE_ADAPTER   	0x04
+#define DIR_SET_GRP_ADDR    	0x06
+#define DIR_SET_FUNC_ADDR   	0x07 /* struct srb_set_funct_addr */
+#define DIR_READ_LOG 		0x08 /* struct srb_read_log */
+#define DLC_OPEN_SAP 		0x15 /* struct dlc_open_sap */
+#define DLC_CLOSE_SAP       	0x16
+#define DATA_LOST 		0x20 /* struct asb_rec */
+#define REC_DATA 		0x81 /* struct arb_rec_req */
+#define XMIT_DATA_REQ 		0x82 /* struct arb_xmit_req */
+#define DLC_STATUS 		0x83 /* struct arb_dlc_status */
+#define RING_STAT_CHANGE    	0x84 /* struct dlc_open_sap ??? */
+
+/* DIR_OPEN_ADAPTER options */
+#define OPEN_PASS_BCON_MAC 0x0100
+#define NUM_RCV_BUF 2
+#define RCV_BUF_LEN 1024
+#define DHB_LENGTH 2048
+#define NUM_DHB 2
+#define DLC_MAX_SAP 2
+#define DLC_MAX_STA 1
+
+/* DLC_OPEN_SAP options */
+#define MAX_I_FIELD 0x0088
+#define SAP_OPEN_IND_SAP 0x04
+#define SAP_OPEN_PRIORITY 0x20
+#define SAP_OPEN_STATION_CNT 0x1
+#define XMIT_DIR_FRAME 0x0A
+#define XMIT_UI_FRAME  0x0d
+#define XMIT_XID_CMD   0x0e
+#define XMIT_TEST_CMD  0x11
+
+/* srb close return code */
+#define SIGNAL_LOSS  0x8000
+#define HARD_ERROR   0x4000
+#define XMIT_BEACON  0x1000
+#define LOBE_FAULT   0x0800
+#define AUTO_REMOVAL 0x0400
+#define REMOVE_RECV  0x0100
+#define LOG_OVERFLOW 0x0080
+#define RING_RECOVER 0x0020
+
+struct srb_init_response {
+	unsigned char command;
+	unsigned char init_status;
+	unsigned char init_status_2;
+	unsigned char reserved[3];
+	__u16 bring_up_code;
+	__u16 encoded_address;
+	__u16 level_address;
+	__u16 adapter_address;
+	__u16 parms_address;
+	__u16 mac_address;
+};
+
+struct dir_open_adapter {
+	unsigned char command;
+	char reserved[7];
+	__u16 open_options;
+	unsigned char node_address[6];
+	unsigned char group_address[4];
+	unsigned char funct_address[4];
+	__u16 num_rcv_buf;
+	__u16 rcv_buf_len;
+	__u16 dhb_length;
+	unsigned char num_dhb;
+	char reserved2;
+	unsigned char dlc_max_sap;
+	unsigned char dlc_max_sta;
+	unsigned char dlc_max_gsap;
+	unsigned char dlc_max_gmem;
+	unsigned char dlc_t1_tick_1;
+	unsigned char dlc_t2_tick_1;
+	unsigned char dlc_ti_tick_1;
+	unsigned char dlc_t1_tick_2;
+	unsigned char dlc_t2_tick_2;
+	unsigned char dlc_ti_tick_2;
+	unsigned char product_id[18];
+};
+
+struct dlc_open_sap {
+	unsigned char command;
+	unsigned char reserved1;
+	unsigned char ret_code;
+	unsigned char reserved2;
+	__u16 station_id;
+	unsigned char timer_t1;
+	unsigned char timer_t2;
+	unsigned char timer_ti;
+	unsigned char maxout;
+	unsigned char maxin;
+	unsigned char maxout_incr;
+	unsigned char max_retry_count;
+	unsigned char gsap_max_mem;
+	__u16 max_i_field;
+	unsigned char sap_value;
+	unsigned char sap_options;
+	unsigned char station_count;
+	unsigned char sap_gsap_mem;
+	unsigned char gsap[0];
+};
+
+struct srb_xmit {
+	unsigned char command;
+	unsigned char cmd_corr;
+	unsigned char ret_code;
+	unsigned char reserved1;
+	__u16 station_id;
+};
+
+struct arb_rec_req {
+	unsigned char command;
+	unsigned char reserved1[3];
+	__u16 station_id;
+	__u16 rec_buf_addr;
+	unsigned char lan_hdr_len;
+	unsigned char dlc_hdr_len;
+	__u16 frame_len;
+	unsigned char msg_type;
+};
+
+struct asb_rec {
+	unsigned char command;
+	unsigned char reserved1;
+	unsigned char ret_code;
+	unsigned char reserved2;
+	__u16 station_id;
+	__u16 rec_buf_addr;
+};
+
+struct rec_buf {
+  	unsigned char reserved1[2];
+	__u16 buf_ptr;
+	unsigned char reserved2;
+	unsigned char receive_fs;
+	__u16 buf_len;
+	unsigned char data[0];
+};
+
+struct srb_set_funct_addr {
+	unsigned char command;
+	unsigned char reserved1;
+	unsigned char ret_code;
+	unsigned char reserved2[3];
+	unsigned char funct_address[4];
+};
+
+#endif
diff --git a/include/linux/icmp.h b/include/linux/icmp.h
new file mode 100644
index 00000000..474f2a51
--- /dev/null
+++ b/include/linux/icmp.h
@@ -0,0 +1,105 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the ICMP protocol.
+ *
+ * Version:	@(#)icmp.h	1.0.3	04/28/93
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_ICMP_H
+#define	_LINUX_ICMP_H
+
+#include <linux/types.h>
+
+#define ICMP_ECHOREPLY		0	/* Echo Reply			*/
+#define ICMP_DEST_UNREACH	3	/* Destination Unreachable	*/
+#define ICMP_SOURCE_QUENCH	4	/* Source Quench		*/
+#define ICMP_REDIRECT		5	/* Redirect (change route)	*/
+#define ICMP_ECHO		8	/* Echo Request			*/
+#define ICMP_TIME_EXCEEDED	11	/* Time Exceeded		*/
+#define ICMP_PARAMETERPROB	12	/* Parameter Problem		*/
+#define ICMP_TIMESTAMP		13	/* Timestamp Request		*/
+#define ICMP_TIMESTAMPREPLY	14	/* Timestamp Reply		*/
+#define ICMP_INFO_REQUEST	15	/* Information Request		*/
+#define ICMP_INFO_REPLY		16	/* Information Reply		*/
+#define ICMP_ADDRESS		17	/* Address Mask Request		*/
+#define ICMP_ADDRESSREPLY	18	/* Address Mask Reply		*/
+#define NR_ICMP_TYPES		18
+
+
+/* Codes for UNREACH. */
+#define ICMP_NET_UNREACH	0	/* Network Unreachable		*/
+#define ICMP_HOST_UNREACH	1	/* Host Unreachable		*/
+#define ICMP_PROT_UNREACH	2	/* Protocol Unreachable		*/
+#define ICMP_PORT_UNREACH	3	/* Port Unreachable		*/
+#define ICMP_FRAG_NEEDED	4	/* Fragmentation Needed/DF set	*/
+#define ICMP_SR_FAILED		5	/* Source Route failed		*/
+#define ICMP_NET_UNKNOWN	6
+#define ICMP_HOST_UNKNOWN	7
+#define ICMP_HOST_ISOLATED	8
+#define ICMP_NET_ANO		9
+#define ICMP_HOST_ANO		10
+#define ICMP_NET_UNR_TOS	11
+#define ICMP_HOST_UNR_TOS	12
+#define ICMP_PKT_FILTERED	13	/* Packet filtered */
+#define ICMP_PREC_VIOLATION	14	/* Precedence violation */
+#define ICMP_PREC_CUTOFF	15	/* Precedence cut off */
+#define NR_ICMP_UNREACH		15	/* instead of hardcoding immediate value */
+
+/* Codes for REDIRECT. */
+#define ICMP_REDIR_NET		0	/* Redirect Net			*/
+#define ICMP_REDIR_HOST		1	/* Redirect Host		*/
+#define ICMP_REDIR_NETTOS	2	/* Redirect Net for TOS		*/
+#define ICMP_REDIR_HOSTTOS	3	/* Redirect Host for TOS	*/
+
+/* Codes for TIME_EXCEEDED. */
+#define ICMP_EXC_TTL		0	/* TTL count exceeded		*/
+#define ICMP_EXC_FRAGTIME	1	/* Fragment Reass time exceeded	*/
+
+
+struct icmphdr {
+  __u8		type;
+  __u8		code;
+  __sum16	checksum;
+  union {
+	struct {
+		__be16	id;
+		__be16	sequence;
+	} echo;
+	__be32	gateway;
+	struct {
+		__be16	__unused;
+		__be16	mtu;
+	} frag;
+  } un;
+};
+
+#ifdef __KERNEL__
+#include <linux/skbuff.h>
+
+static inline struct icmphdr *icmp_hdr(const struct sk_buff *skb)
+{
+	return (struct icmphdr *)skb_transport_header(skb);
+}
+#endif
+
+/*
+ *	constants for (set|get)sockopt
+ */
+
+#define ICMP_FILTER			1
+
+struct icmp_filter {
+	__u32		data;
+};
+
+
+#endif	/* _LINUX_ICMP_H */
diff --git a/include/linux/icmpv6.h b/include/linux/icmpv6.h
new file mode 100644
index 00000000..ba45e6bc
--- /dev/null
+++ b/include/linux/icmpv6.h
@@ -0,0 +1,196 @@
+#ifndef _LINUX_ICMPV6_H
+#define _LINUX_ICMPV6_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+struct icmp6hdr {
+
+	__u8		icmp6_type;
+	__u8		icmp6_code;
+	__sum16		icmp6_cksum;
+
+
+	union {
+		__be32			un_data32[1];
+		__be16			un_data16[2];
+		__u8			un_data8[4];
+
+		struct icmpv6_echo {
+			__be16		identifier;
+			__be16		sequence;
+		} u_echo;
+
+                struct icmpv6_nd_advt {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+                        __u32		reserved:5,
+                        		override:1,
+                        		solicited:1,
+                        		router:1,
+					reserved2:24;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+                        __u32		router:1,
+					solicited:1,
+                        		override:1,
+                        		reserved:29;
+#else
+#error	"Please fix <asm/byteorder.h>"
+#endif						
+                } u_nd_advt;
+
+                struct icmpv6_nd_ra {
+			__u8		hop_limit;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+			__u8		reserved:3,
+					router_pref:2,
+					home_agent:1,
+					other:1,
+					managed:1;
+
+#elif defined(__BIG_ENDIAN_BITFIELD)
+			__u8		managed:1,
+					other:1,
+					home_agent:1,
+					router_pref:2,
+					reserved:3;
+#else
+#error	"Please fix <asm/byteorder.h>"
+#endif
+			__be16		rt_lifetime;
+                } u_nd_ra;
+
+	} icmp6_dataun;
+
+#define icmp6_identifier	icmp6_dataun.u_echo.identifier
+#define icmp6_sequence		icmp6_dataun.u_echo.sequence
+#define icmp6_pointer		icmp6_dataun.un_data32[0]
+#define icmp6_mtu		icmp6_dataun.un_data32[0]
+#define icmp6_unused		icmp6_dataun.un_data32[0]
+#define icmp6_maxdelay		icmp6_dataun.un_data16[0]
+#define icmp6_router		icmp6_dataun.u_nd_advt.router
+#define icmp6_solicited		icmp6_dataun.u_nd_advt.solicited
+#define icmp6_override		icmp6_dataun.u_nd_advt.override
+#define icmp6_ndiscreserved	icmp6_dataun.u_nd_advt.reserved
+#define icmp6_hop_limit		icmp6_dataun.u_nd_ra.hop_limit
+#define icmp6_addrconf_managed	icmp6_dataun.u_nd_ra.managed
+#define icmp6_addrconf_other	icmp6_dataun.u_nd_ra.other
+#define icmp6_rt_lifetime	icmp6_dataun.u_nd_ra.rt_lifetime
+#define icmp6_router_pref	icmp6_dataun.u_nd_ra.router_pref
+};
+
+#ifdef __KERNEL__
+#include <linux/skbuff.h>
+
+static inline struct icmp6hdr *icmp6_hdr(const struct sk_buff *skb)
+{
+	return (struct icmp6hdr *)skb_transport_header(skb);
+}
+#endif
+
+#define ICMPV6_ROUTER_PREF_LOW		0x3
+#define ICMPV6_ROUTER_PREF_MEDIUM	0x0
+#define ICMPV6_ROUTER_PREF_HIGH		0x1
+#define ICMPV6_ROUTER_PREF_INVALID	0x2
+
+#define ICMPV6_DEST_UNREACH		1
+#define ICMPV6_PKT_TOOBIG		2
+#define ICMPV6_TIME_EXCEED		3
+#define ICMPV6_PARAMPROB		4
+
+#define ICMPV6_INFOMSG_MASK		0x80
+
+#define ICMPV6_ECHO_REQUEST		128
+#define ICMPV6_ECHO_REPLY		129
+#define ICMPV6_MGM_QUERY		130
+#define ICMPV6_MGM_REPORT       	131
+#define ICMPV6_MGM_REDUCTION    	132
+
+#define ICMPV6_NI_QUERY			139
+#define ICMPV6_NI_REPLY			140
+
+#define ICMPV6_MLD2_REPORT		143
+
+#define ICMPV6_DHAAD_REQUEST		144
+#define ICMPV6_DHAAD_REPLY		145
+#define ICMPV6_MOBILE_PREFIX_SOL	146
+#define ICMPV6_MOBILE_PREFIX_ADV	147
+
+/*
+ *	Codes for Destination Unreachable
+ */
+#define ICMPV6_NOROUTE			0
+#define ICMPV6_ADM_PROHIBITED		1
+#define ICMPV6_NOT_NEIGHBOUR		2
+#define ICMPV6_ADDR_UNREACH		3
+#define ICMPV6_PORT_UNREACH		4
+
+/*
+ *	Codes for Time Exceeded
+ */
+#define ICMPV6_EXC_HOPLIMIT		0
+#define ICMPV6_EXC_FRAGTIME		1
+
+/*
+ *	Codes for Parameter Problem
+ */
+#define ICMPV6_HDR_FIELD		0
+#define ICMPV6_UNK_NEXTHDR		1
+#define ICMPV6_UNK_OPTION		2
+
+/*
+ *	constants for (set|get)sockopt
+ */
+
+#define ICMPV6_FILTER			1
+
+/*
+ *	ICMPV6 filter
+ */
+
+#define ICMPV6_FILTER_BLOCK		1
+#define ICMPV6_FILTER_PASS		2
+#define ICMPV6_FILTER_BLOCKOTHERS	3
+#define ICMPV6_FILTER_PASSONLY		4
+
+struct icmp6_filter {
+	__u32		data[8];
+};
+
+/*
+ *	Definitions for MLDv2
+ */
+#define MLD2_MODE_IS_INCLUDE	1
+#define MLD2_MODE_IS_EXCLUDE	2
+#define MLD2_CHANGE_TO_INCLUDE	3
+#define MLD2_CHANGE_TO_EXCLUDE	4
+#define MLD2_ALLOW_NEW_SOURCES	5
+#define MLD2_BLOCK_OLD_SOURCES	6
+
+#define MLD2_ALL_MCR_INIT { { { 0xff,0x02,0,0,0,0,0,0,0,0,0,0,0,0,0,0x16 } } }
+
+#ifdef __KERNEL__
+
+#include <linux/netdevice.h>
+
+extern void				icmpv6_send(struct sk_buff *skb,
+						    u8 type, u8 code,
+						    __u32 info);
+
+extern int				icmpv6_init(void);
+extern int				icmpv6_err_convert(u8 type, u8 code,
+							   int *err);
+extern void				icmpv6_cleanup(void);
+extern void				icmpv6_param_prob(struct sk_buff *skb,
+							  u8 code, int pos);
+
+struct flowi6;
+struct in6_addr;
+extern void				icmpv6_flow_init(struct sock *sk,
+							 struct flowi6 *fl6,
+							 u8 type,
+							 const struct in6_addr *saddr,
+							 const struct in6_addr *daddr,
+							 int oif);
+#endif
+
+#endif
diff --git a/include/linux/ide.h b/include/linux/ide.h
new file mode 100644
index 00000000..b1797491
--- /dev/null
+++ b/include/linux/ide.h
@@ -0,0 +1,1558 @@
+#ifndef _IDE_H
+#define _IDE_H
+/*
+ *  linux/include/linux/ide.h
+ *
+ *  Copyright (C) 1994-2002  Linus Torvalds & authors
+ */
+
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/ata.h>
+#include <linux/blkdev.h>
+#include <linux/proc_fs.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/bio.h>
+#include <linux/pci.h>
+#include <linux/completion.h>
+#include <linux/pm.h>
+#include <linux/mutex.h>
+#ifdef CONFIG_BLK_DEV_IDEACPI
+#include <acpi/acpi.h>
+#endif
+#include <asm/byteorder.h>
+#include <asm/io.h>
+
+/* for request_sense */
+#include <linux/cdrom.h>
+
+#if defined(CONFIG_CRIS) || defined(CONFIG_FRV) || defined(CONFIG_MN10300)
+# define SUPPORT_VLB_SYNC 0
+#else
+# define SUPPORT_VLB_SYNC 1
+#endif
+
+/*
+ * Probably not wise to fiddle with these
+ */
+#define IDE_DEFAULT_MAX_FAILURES	1
+#define ERROR_MAX	8	/* Max read/write errors per sector */
+#define ERROR_RESET	3	/* Reset controller every 4th retry */
+#define ERROR_RECAL	1	/* Recalibrate every 2nd retry */
+
+struct device;
+
+/* Error codes returned in rq->errors to the higher part of the driver. */
+enum {
+	IDE_DRV_ERROR_GENERAL	= 101,
+	IDE_DRV_ERROR_FILEMARK	= 102,
+	IDE_DRV_ERROR_EOD	= 103,
+};
+
+/*
+ * Definitions for accessing IDE controller registers
+ */
+#define IDE_NR_PORTS		(10)
+
+struct ide_io_ports {
+	unsigned long	data_addr;
+
+	union {
+		unsigned long error_addr;	/*   read:  error */
+		unsigned long feature_addr;	/*  write: feature */
+	};
+
+	unsigned long	nsect_addr;
+	unsigned long	lbal_addr;
+	unsigned long	lbam_addr;
+	unsigned long	lbah_addr;
+
+	unsigned long	device_addr;
+
+	union {
+		unsigned long status_addr;	/*  read: status  */
+		unsigned long command_addr;	/* write: command */
+	};
+
+	unsigned long	ctl_addr;
+
+	unsigned long	irq_addr;
+};
+
+#define OK_STAT(stat,good,bad)	(((stat)&((good)|(bad)))==(good))
+
+#define BAD_R_STAT	(ATA_BUSY | ATA_ERR)
+#define BAD_W_STAT	(BAD_R_STAT | ATA_DF)
+#define BAD_STAT	(BAD_R_STAT | ATA_DRQ)
+#define DRIVE_READY	(ATA_DRDY | ATA_DSC)
+
+#define BAD_CRC		(ATA_ABORTED | ATA_ICRC)
+
+#define SATA_NR_PORTS		(3)	/* 16 possible ?? */
+
+#define SATA_STATUS_OFFSET	(0)
+#define SATA_ERROR_OFFSET	(1)
+#define SATA_CONTROL_OFFSET	(2)
+
+/*
+ * Our Physical Region Descriptor (PRD) table should be large enough
+ * to handle the biggest I/O request we are likely to see.  Since requests
+ * can have no more than 256 sectors, and since the typical blocksize is
+ * two or more sectors, we could get by with a limit of 128 entries here for
+ * the usual worst case.  Most requests seem to include some contiguous blocks,
+ * further reducing the number of table entries required.
+ *
+ * The driver reverts to PIO mode for individual requests that exceed
+ * this limit (possible with 512 byte blocksizes, eg. MSDOS f/s), so handling
+ * 100% of all crazy scenarios here is not necessary.
+ *
+ * As it turns out though, we must allocate a full 4KB page for this,
+ * so the two PRD tables (ide0 & ide1) will each get half of that,
+ * allowing each to have about 256 entries (8 bytes each) from this.
+ */
+#define PRD_BYTES       8
+#define PRD_ENTRIES	256
+
+/*
+ * Some more useful definitions
+ */
+#define PARTN_BITS	6	/* number of minor dev bits for partitions */
+#define MAX_DRIVES	2	/* per interface; 2 assumed by lots of code */
+#define SECTOR_SIZE	512
+
+/*
+ * Timeouts for various operations:
+ */
+enum {
+	/* spec allows up to 20ms, but CF cards and SSD drives need more */
+	WAIT_DRQ	= 1 * HZ,	/* 1s */
+	/* some laptops are very slow */
+	WAIT_READY	= 5 * HZ,	/* 5s */
+	/* should be less than 3ms (?), if all ATAPI CD is closed at boot */
+	WAIT_PIDENTIFY	= 10 * HZ,	/* 10s */
+	/* worst case when spinning up */
+	WAIT_WORSTCASE	= 30 * HZ,	/* 30s */
+	/* maximum wait for an IRQ to happen */
+	WAIT_CMD	= 10 * HZ,	/* 10s */
+	/* Some drives require a longer IRQ timeout. */
+	WAIT_FLOPPY_CMD	= 50 * HZ,	/* 50s */
+	/*
+	 * Some drives (for example, Seagate STT3401A Travan) require a very
+	 * long timeout, because they don't return an interrupt or clear their
+	 * BSY bit until after the command completes (even retension commands).
+	 */
+	WAIT_TAPE_CMD	= 900 * HZ,	/* 900s */
+	/* minimum sleep time */
+	WAIT_MIN_SLEEP	= HZ / 50,	/* 20ms */
+};
+
+/*
+ * Op codes for special requests to be handled by ide_special_rq().
+ * Values should be in the range of 0x20 to 0x3f.
+ */
+#define REQ_DRIVE_RESET		0x20
+#define REQ_DEVSET_EXEC		0x21
+#define REQ_PARK_HEADS		0x22
+#define REQ_UNPARK_HEADS	0x23
+
+/*
+ * hwif_chipset_t is used to keep track of the specific hardware
+ * chipset used by each IDE interface, if known.
+ */
+enum {		ide_unknown,	ide_generic,	ide_pci,
+		ide_cmd640,	ide_dtc2278,	ide_ali14xx,
+		ide_qd65xx,	ide_umc8672,	ide_ht6560b,
+		ide_4drives,	ide_pmac,	ide_acorn,
+		ide_au1xxx,	ide_palm3710
+};
+
+typedef u8 hwif_chipset_t;
+
+/*
+ * Structure to hold all information about the location of this port
+ */
+struct ide_hw {
+	union {
+		struct ide_io_ports	io_ports;
+		unsigned long		io_ports_array[IDE_NR_PORTS];
+	};
+
+	int		irq;			/* our irq number */
+	struct device	*dev, *parent;
+	unsigned long	config;
+};
+
+static inline void ide_std_init_ports(struct ide_hw *hw,
+				      unsigned long io_addr,
+				      unsigned long ctl_addr)
+{
+	unsigned int i;
+
+	for (i = 0; i <= 7; i++)
+		hw->io_ports_array[i] = io_addr++;
+
+	hw->io_ports.ctl_addr = ctl_addr;
+}
+
+#define MAX_HWIFS	10
+
+/*
+ * Now for the data we need to maintain per-drive:  ide_drive_t
+ */
+
+#define ide_scsi	0x21
+#define ide_disk	0x20
+#define ide_optical	0x7
+#define ide_cdrom	0x5
+#define ide_tape	0x1
+#define ide_floppy	0x0
+
+/*
+ * Special Driver Flags
+ */
+enum {
+	IDE_SFLAG_SET_GEOMETRY		= (1 << 0),
+	IDE_SFLAG_RECALIBRATE		= (1 << 1),
+	IDE_SFLAG_SET_MULTMODE		= (1 << 2),
+};
+
+/*
+ * Status returned from various ide_ functions
+ */
+typedef enum {
+	ide_stopped,	/* no drive operation was started */
+	ide_started,	/* a drive operation was started, handler was set */
+} ide_startstop_t;
+
+enum {
+	IDE_VALID_ERROR 		= (1 << 1),
+	IDE_VALID_FEATURE		= IDE_VALID_ERROR,
+	IDE_VALID_NSECT 		= (1 << 2),
+	IDE_VALID_LBAL			= (1 << 3),
+	IDE_VALID_LBAM			= (1 << 4),
+	IDE_VALID_LBAH			= (1 << 5),
+	IDE_VALID_DEVICE		= (1 << 6),
+	IDE_VALID_LBA			= IDE_VALID_LBAL |
+					  IDE_VALID_LBAM |
+					  IDE_VALID_LBAH,
+	IDE_VALID_OUT_TF		= IDE_VALID_FEATURE |
+					  IDE_VALID_NSECT |
+					  IDE_VALID_LBA,
+	IDE_VALID_IN_TF 		= IDE_VALID_NSECT |
+					  IDE_VALID_LBA,
+	IDE_VALID_OUT_HOB		= IDE_VALID_OUT_TF,
+	IDE_VALID_IN_HOB		= IDE_VALID_ERROR |
+					  IDE_VALID_NSECT |
+					  IDE_VALID_LBA,
+};
+
+enum {
+	IDE_TFLAG_LBA48			= (1 << 0),
+	IDE_TFLAG_WRITE			= (1 << 1),
+	IDE_TFLAG_CUSTOM_HANDLER	= (1 << 2),
+	IDE_TFLAG_DMA_PIO_FALLBACK	= (1 << 3),
+	/* force 16-bit I/O operations */
+	IDE_TFLAG_IO_16BIT		= (1 << 4),
+	/* struct ide_cmd was allocated using kmalloc() */
+	IDE_TFLAG_DYN			= (1 << 5),
+	IDE_TFLAG_FS			= (1 << 6),
+	IDE_TFLAG_MULTI_PIO		= (1 << 7),
+	IDE_TFLAG_SET_XFER		= (1 << 8),
+};
+
+enum {
+	IDE_FTFLAG_FLAGGED		= (1 << 0),
+	IDE_FTFLAG_SET_IN_FLAGS		= (1 << 1),
+	IDE_FTFLAG_OUT_DATA		= (1 << 2),
+	IDE_FTFLAG_IN_DATA		= (1 << 3),
+};
+
+struct ide_taskfile {
+	u8	data;		/* 0: data byte (for TASKFILE ioctl) */
+	union {			/* 1: */
+		u8 error;	/*  read: error */
+		u8 feature;	/* write: feature */
+	};
+	u8	nsect;		/* 2: number of sectors */
+	u8	lbal;		/* 3: LBA low */
+	u8	lbam;		/* 4: LBA mid */
+	u8	lbah;		/* 5: LBA high */
+	u8	device;		/* 6: device select */
+	union {			/* 7: */
+		u8 status;	/*  read: status */
+		u8 command;	/* write: command */
+	};
+};
+
+struct ide_cmd {
+	struct ide_taskfile	tf;
+	struct ide_taskfile	hob;
+	struct {
+		struct {
+			u8		tf;
+			u8		hob;
+		} out, in;
+	} valid;
+
+	u16			tf_flags;
+	u8			ftf_flags;	/* for TASKFILE ioctl */
+	int			protocol;
+
+	int			sg_nents;	  /* number of sg entries */
+	int			orig_sg_nents;
+	int			sg_dma_direction; /* DMA transfer direction */
+
+	unsigned int		nbytes;
+	unsigned int		nleft;
+	unsigned int		last_xfer_len;
+
+	struct scatterlist	*cursg;
+	unsigned int		cursg_ofs;
+
+	struct request		*rq;		/* copy of request */
+};
+
+/* ATAPI packet command flags */
+enum {
+	/* set when an error is considered normal - no retry (ide-tape) */
+	PC_FLAG_ABORT			= (1 << 0),
+	PC_FLAG_SUPPRESS_ERROR		= (1 << 1),
+	PC_FLAG_WAIT_FOR_DSC		= (1 << 2),
+	PC_FLAG_DMA_OK			= (1 << 3),
+	PC_FLAG_DMA_IN_PROGRESS		= (1 << 4),
+	PC_FLAG_DMA_ERROR		= (1 << 5),
+	PC_FLAG_WRITING			= (1 << 6),
+};
+
+#define ATAPI_WAIT_PC		(60 * HZ)
+
+struct ide_atapi_pc {
+	/* actual packet bytes */
+	u8 c[12];
+	/* incremented on each retry */
+	int retries;
+	int error;
+
+	/* bytes to transfer */
+	int req_xfer;
+
+	/* the corresponding request */
+	struct request *rq;
+
+	unsigned long flags;
+
+	/*
+	 * those are more or less driver-specific and some of them are subject
+	 * to change/removal later.
+	 */
+	unsigned long timeout;
+};
+
+struct ide_devset;
+struct ide_driver;
+
+#ifdef CONFIG_BLK_DEV_IDEACPI
+struct ide_acpi_drive_link;
+struct ide_acpi_hwif_link;
+#endif
+
+struct ide_drive_s;
+
+struct ide_disk_ops {
+	int		(*check)(struct ide_drive_s *, const char *);
+	int		(*get_capacity)(struct ide_drive_s *);
+	void		(*unlock_native_capacity)(struct ide_drive_s *);
+	void		(*setup)(struct ide_drive_s *);
+	void		(*flush)(struct ide_drive_s *);
+	int		(*init_media)(struct ide_drive_s *, struct gendisk *);
+	int		(*set_doorlock)(struct ide_drive_s *, struct gendisk *,
+					int);
+	ide_startstop_t	(*do_request)(struct ide_drive_s *, struct request *,
+				      sector_t);
+	int		(*ioctl)(struct ide_drive_s *, struct block_device *,
+				 fmode_t, unsigned int, unsigned long);
+};
+
+/* ATAPI device flags */
+enum {
+	IDE_AFLAG_DRQ_INTERRUPT		= (1 << 0),
+
+	/* ide-cd */
+	/* Drive cannot eject the disc. */
+	IDE_AFLAG_NO_EJECT		= (1 << 1),
+	/* Drive is a pre ATAPI 1.2 drive. */
+	IDE_AFLAG_PRE_ATAPI12		= (1 << 2),
+	/* TOC addresses are in BCD. */
+	IDE_AFLAG_TOCADDR_AS_BCD	= (1 << 3),
+	/* TOC track numbers are in BCD. */
+	IDE_AFLAG_TOCTRACKS_AS_BCD	= (1 << 4),
+	/* Saved TOC information is current. */
+	IDE_AFLAG_TOC_VALID		= (1 << 6),
+	/* We think that the drive door is locked. */
+	IDE_AFLAG_DOOR_LOCKED		= (1 << 7),
+	/* SET_CD_SPEED command is unsupported. */
+	IDE_AFLAG_NO_SPEED_SELECT	= (1 << 8),
+	IDE_AFLAG_VERTOS_300_SSD	= (1 << 9),
+	IDE_AFLAG_VERTOS_600_ESD	= (1 << 10),
+	IDE_AFLAG_SANYO_3CD		= (1 << 11),
+	IDE_AFLAG_FULL_CAPS_PAGE	= (1 << 12),
+	IDE_AFLAG_PLAY_AUDIO_OK		= (1 << 13),
+	IDE_AFLAG_LE_SPEED_FIELDS	= (1 << 14),
+
+	/* ide-floppy */
+	/* Avoid commands not supported in Clik drive */
+	IDE_AFLAG_CLIK_DRIVE		= (1 << 15),
+	/* Requires BH algorithm for packets */
+	IDE_AFLAG_ZIP_DRIVE		= (1 << 16),
+	/* Supports format progress report */
+	IDE_AFLAG_SRFP			= (1 << 17),
+
+	/* ide-tape */
+	IDE_AFLAG_IGNORE_DSC		= (1 << 18),
+	/* 0 When the tape position is unknown */
+	IDE_AFLAG_ADDRESS_VALID		= (1 <<	19),
+	/* Device already opened */
+	IDE_AFLAG_BUSY			= (1 << 20),
+	/* Attempt to auto-detect the current user block size */
+	IDE_AFLAG_DETECT_BS		= (1 << 21),
+	/* Currently on a filemark */
+	IDE_AFLAG_FILEMARK		= (1 << 22),
+	/* 0 = no tape is loaded, so we don't rewind after ejecting */
+	IDE_AFLAG_MEDIUM_PRESENT	= (1 << 23),
+
+	IDE_AFLAG_NO_AUTOCLOSE		= (1 << 24),
+};
+
+/* device flags */
+enum {
+	/* restore settings after device reset */
+	IDE_DFLAG_KEEP_SETTINGS		= (1 << 0),
+	/* device is using DMA for read/write */
+	IDE_DFLAG_USING_DMA		= (1 << 1),
+	/* okay to unmask other IRQs */
+	IDE_DFLAG_UNMASK		= (1 << 2),
+	/* don't attempt flushes */
+	IDE_DFLAG_NOFLUSH		= (1 << 3),
+	/* DSC overlap */
+	IDE_DFLAG_DSC_OVERLAP		= (1 << 4),
+	/* give potential excess bandwidth */
+	IDE_DFLAG_NICE1			= (1 << 5),
+	/* device is physically present */
+	IDE_DFLAG_PRESENT		= (1 << 6),
+	/* disable Host Protected Area */
+	IDE_DFLAG_NOHPA			= (1 << 7),
+	/* id read from device (synthetic if not set) */
+	IDE_DFLAG_ID_READ		= (1 << 8),
+	IDE_DFLAG_NOPROBE		= (1 << 9),
+	/* need to do check_media_change() */
+	IDE_DFLAG_REMOVABLE		= (1 << 10),
+	/* needed for removable devices */
+	IDE_DFLAG_ATTACH		= (1 << 11),
+	IDE_DFLAG_FORCED_GEOM		= (1 << 12),
+	/* disallow setting unmask bit */
+	IDE_DFLAG_NO_UNMASK		= (1 << 13),
+	/* disallow enabling 32-bit I/O */
+	IDE_DFLAG_NO_IO_32BIT		= (1 << 14),
+	/* for removable only: door lock/unlock works */
+	IDE_DFLAG_DOORLOCKING		= (1 << 15),
+	/* disallow DMA */
+	IDE_DFLAG_NODMA			= (1 << 16),
+	/* powermanagement told us not to do anything, so sleep nicely */
+	IDE_DFLAG_BLOCKED		= (1 << 17),
+	/* sleeping & sleep field valid */
+	IDE_DFLAG_SLEEPING		= (1 << 18),
+	IDE_DFLAG_POST_RESET		= (1 << 19),
+	IDE_DFLAG_UDMA33_WARNED		= (1 << 20),
+	IDE_DFLAG_LBA48			= (1 << 21),
+	/* status of write cache */
+	IDE_DFLAG_WCACHE		= (1 << 22),
+	/* used for ignoring ATA_DF */
+	IDE_DFLAG_NOWERR		= (1 << 23),
+	/* retrying in PIO */
+	IDE_DFLAG_DMA_PIO_RETRY		= (1 << 24),
+	IDE_DFLAG_LBA			= (1 << 25),
+	/* don't unload heads */
+	IDE_DFLAG_NO_UNLOAD		= (1 << 26),
+	/* heads unloaded, please don't reset port */
+	IDE_DFLAG_PARKED		= (1 << 27),
+	IDE_DFLAG_MEDIA_CHANGED		= (1 << 28),
+	/* write protect */
+	IDE_DFLAG_WP			= (1 << 29),
+	IDE_DFLAG_FORMAT_IN_PROGRESS	= (1 << 30),
+	IDE_DFLAG_NIEN_QUIRK		= (1 << 31),
+};
+
+struct ide_drive_s {
+	char		name[4];	/* drive name, such as "hda" */
+        char            driver_req[10];	/* requests specific driver */
+
+	struct request_queue	*queue;	/* request queue */
+
+	struct request		*rq;	/* current request */
+	void		*driver_data;	/* extra driver data */
+	u16			*id;	/* identification info */
+#ifdef CONFIG_IDE_PROC_FS
+	struct proc_dir_entry *proc;	/* /proc/ide/ directory entry */
+	const struct ide_proc_devset *settings; /* /proc/ide/ drive settings */
+#endif
+	struct hwif_s		*hwif;	/* actually (ide_hwif_t *) */
+
+	const struct ide_disk_ops *disk_ops;
+
+	unsigned long dev_flags;
+
+	unsigned long sleep;		/* sleep until this time */
+	unsigned long timeout;		/* max time to wait for irq */
+
+	u8	special_flags;		/* special action flags */
+
+	u8	select;			/* basic drive/head select reg value */
+	u8	retry_pio;		/* retrying dma capable host in pio */
+	u8	waiting_for_dma;	/* dma currently in progress */
+	u8	dma;			/* atapi dma flag */
+
+        u8	init_speed;	/* transfer rate set at boot */
+        u8	current_speed;	/* current transfer rate set */
+	u8	desired_speed;	/* desired transfer rate set */
+	u8	pio_mode;	/* for ->set_pio_mode _only_ */
+	u8	dma_mode;	/* for ->set_dma_mode _only_ */
+	u8	dn;		/* now wide spread use */
+	u8	acoustic;	/* acoustic management */
+	u8	media;		/* disk, cdrom, tape, floppy, ... */
+	u8	ready_stat;	/* min status value for drive ready */
+	u8	mult_count;	/* current multiple sector setting */
+	u8	mult_req;	/* requested multiple sector setting */
+	u8	io_32bit;	/* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
+	u8	bad_wstat;	/* used for ignoring ATA_DF */
+	u8	head;		/* "real" number of heads */
+	u8	sect;		/* "real" sectors per track */
+	u8	bios_head;	/* BIOS/fdisk/LILO number of heads */
+	u8	bios_sect;	/* BIOS/fdisk/LILO sectors per track */
+
+	/* delay this long before sending packet command */
+	u8 pc_delay;
+
+	unsigned int	bios_cyl;	/* BIOS/fdisk/LILO number of cyls */
+	unsigned int	cyl;		/* "real" number of cyls */
+	void		*drive_data;	/* used by set_pio_mode/dev_select() */
+	unsigned int	failures;	/* current failure count */
+	unsigned int	max_failures;	/* maximum allowed failure count */
+	u64		probed_capacity;/* initial/native media capacity */
+	u64		capacity64;	/* total number of sectors */
+
+	int		lun;		/* logical unit */
+	int		crc_count;	/* crc counter to reduce drive speed */
+
+	unsigned long	debug_mask;	/* debugging levels switch */
+
+#ifdef CONFIG_BLK_DEV_IDEACPI
+	struct ide_acpi_drive_link *acpidata;
+#endif
+	struct list_head list;
+	struct device	gendev;
+	struct completion gendev_rel_comp;	/* to deal with device release() */
+
+	/* current packet command */
+	struct ide_atapi_pc *pc;
+
+	/* last failed packet command */
+	struct ide_atapi_pc *failed_pc;
+
+	/* callback for packet commands */
+	int  (*pc_callback)(struct ide_drive_s *, int);
+
+	ide_startstop_t (*irq_handler)(struct ide_drive_s *);
+
+	unsigned long atapi_flags;
+
+	struct ide_atapi_pc request_sense_pc;
+
+	/* current sense rq and buffer */
+	bool sense_rq_armed;
+	struct request sense_rq;
+	struct request_sense sense_data;
+};
+
+typedef struct ide_drive_s ide_drive_t;
+
+#define to_ide_device(dev)		container_of(dev, ide_drive_t, gendev)
+
+#define to_ide_drv(obj, cont_type)	\
+	container_of(obj, struct cont_type, dev)
+
+#define ide_drv_g(disk, cont_type)	\
+	container_of((disk)->private_data, struct cont_type, driver)
+
+struct ide_port_info;
+
+struct ide_tp_ops {
+	void	(*exec_command)(struct hwif_s *, u8);
+	u8	(*read_status)(struct hwif_s *);
+	u8	(*read_altstatus)(struct hwif_s *);
+	void	(*write_devctl)(struct hwif_s *, u8);
+
+	void	(*dev_select)(ide_drive_t *);
+	void	(*tf_load)(ide_drive_t *, struct ide_taskfile *, u8);
+	void	(*tf_read)(ide_drive_t *, struct ide_taskfile *, u8);
+
+	void	(*input_data)(ide_drive_t *, struct ide_cmd *,
+			      void *, unsigned int);
+	void	(*output_data)(ide_drive_t *, struct ide_cmd *,
+			       void *, unsigned int);
+};
+
+extern const struct ide_tp_ops default_tp_ops;
+
+/**
+ * struct ide_port_ops - IDE port operations
+ *
+ * @init_dev:		host specific initialization of a device
+ * @set_pio_mode:	routine to program host for PIO mode
+ * @set_dma_mode:	routine to program host for DMA mode
+ * @reset_poll:		chipset polling based on hba specifics
+ * @pre_reset:		chipset specific changes to default for device-hba resets
+ * @resetproc:		routine to reset controller after a disk reset
+ * @maskproc:		special host masking for drive selection
+ * @quirkproc:		check host's drive quirk list
+ * @clear_irq:		clear IRQ
+ *
+ * @mdma_filter:	filter MDMA modes
+ * @udma_filter:	filter UDMA modes
+ *
+ * @cable_detect:	detect cable type
+ */
+struct ide_port_ops {
+	void	(*init_dev)(ide_drive_t *);
+	void	(*set_pio_mode)(struct hwif_s *, ide_drive_t *);
+	void	(*set_dma_mode)(struct hwif_s *, ide_drive_t *);
+	int	(*reset_poll)(ide_drive_t *);
+	void	(*pre_reset)(ide_drive_t *);
+	void	(*resetproc)(ide_drive_t *);
+	void	(*maskproc)(ide_drive_t *, int);
+	void	(*quirkproc)(ide_drive_t *);
+	void	(*clear_irq)(ide_drive_t *);
+	int	(*test_irq)(struct hwif_s *);
+
+	u8	(*mdma_filter)(ide_drive_t *);
+	u8	(*udma_filter)(ide_drive_t *);
+
+	u8	(*cable_detect)(struct hwif_s *);
+};
+
+struct ide_dma_ops {
+	void	(*dma_host_set)(struct ide_drive_s *, int);
+	int	(*dma_setup)(struct ide_drive_s *, struct ide_cmd *);
+	void	(*dma_start)(struct ide_drive_s *);
+	int	(*dma_end)(struct ide_drive_s *);
+	int	(*dma_test_irq)(struct ide_drive_s *);
+	void	(*dma_lost_irq)(struct ide_drive_s *);
+	/* below ones are optional */
+	int	(*dma_check)(struct ide_drive_s *, struct ide_cmd *);
+	int	(*dma_timer_expiry)(struct ide_drive_s *);
+	void	(*dma_clear)(struct ide_drive_s *);
+	/*
+	 * The following method is optional and only required to be
+	 * implemented for the SFF-8038i compatible controllers.
+	 */
+	u8	(*dma_sff_read_status)(struct hwif_s *);
+};
+
+enum {
+	IDE_PFLAG_PROBING		= (1 << 0),
+};
+
+struct ide_host;
+
+typedef struct hwif_s {
+	struct hwif_s *mate;		/* other hwif from same PCI chip */
+	struct proc_dir_entry *proc;	/* /proc/ide/ directory entry */
+
+	struct ide_host *host;
+
+	char name[6];			/* name of interface, eg. "ide0" */
+
+	struct ide_io_ports	io_ports;
+
+	unsigned long	sata_scr[SATA_NR_PORTS];
+
+	ide_drive_t	*devices[MAX_DRIVES + 1];
+
+	unsigned long	port_flags;
+
+	u8 major;	/* our major number */
+	u8 index;	/* 0 for ide0; 1 for ide1; ... */
+	u8 channel;	/* for dual-port chips: 0=primary, 1=secondary */
+
+	u32 host_flags;
+
+	u8 pio_mask;
+
+	u8 ultra_mask;
+	u8 mwdma_mask;
+	u8 swdma_mask;
+
+	u8 cbl;		/* cable type */
+
+	hwif_chipset_t chipset;	/* sub-module for tuning.. */
+
+	struct device *dev;
+
+	void (*rw_disk)(ide_drive_t *, struct request *);
+
+	const struct ide_tp_ops		*tp_ops;
+	const struct ide_port_ops	*port_ops;
+	const struct ide_dma_ops	*dma_ops;
+
+	/* dma physical region descriptor table (cpu view) */
+	unsigned int	*dmatable_cpu;
+	/* dma physical region descriptor table (dma view) */
+	dma_addr_t	dmatable_dma;
+
+	/* maximum number of PRD table entries */
+	int prd_max_nents;
+	/* PRD entry size in bytes */
+	int prd_ent_size;
+
+	/* Scatter-gather list used to build the above */
+	struct scatterlist *sg_table;
+	int sg_max_nents;		/* Maximum number of entries in it */
+
+	struct ide_cmd cmd;		/* current command */
+
+	int		rqsize;		/* max sectors per request */
+	int		irq;		/* our irq number */
+
+	unsigned long	dma_base;	/* base addr for dma ports */
+
+	unsigned long	config_data;	/* for use by chipset-specific code */
+	unsigned long	select_data;	/* for use by chipset-specific code */
+
+	unsigned long	extra_base;	/* extra addr for dma ports */
+	unsigned	extra_ports;	/* number of extra dma ports */
+
+	unsigned	present    : 1;	/* this interface exists */
+	unsigned	busy	   : 1; /* serializes devices on a port */
+
+	struct device		gendev;
+	struct device		*portdev;
+
+	struct completion gendev_rel_comp; /* To deal with device release() */
+
+	void		*hwif_data;	/* extra hwif data */
+
+#ifdef CONFIG_BLK_DEV_IDEACPI
+	struct ide_acpi_hwif_link *acpidata;
+#endif
+
+	/* IRQ handler, if active */
+	ide_startstop_t	(*handler)(ide_drive_t *);
+
+	/* BOOL: polling active & poll_timeout field valid */
+	unsigned int polling : 1;
+
+	/* current drive */
+	ide_drive_t *cur_dev;
+
+	/* current request */
+	struct request *rq;
+
+	/* failsafe timer */
+	struct timer_list timer;
+	/* timeout value during long polls */
+	unsigned long poll_timeout;
+	/* queried upon timeouts */
+	int (*expiry)(ide_drive_t *);
+
+	int req_gen;
+	int req_gen_timer;
+
+	spinlock_t lock;
+} ____cacheline_internodealigned_in_smp ide_hwif_t;
+
+#define MAX_HOST_PORTS 4
+
+struct ide_host {
+	ide_hwif_t	*ports[MAX_HOST_PORTS + 1];
+	unsigned int	n_ports;
+	struct device	*dev[2];
+
+	int		(*init_chipset)(struct pci_dev *);
+
+	void		(*get_lock)(irq_handler_t, void *);
+	void		(*release_lock)(void);
+
+	irq_handler_t	irq_handler;
+
+	unsigned long	host_flags;
+
+	int		irq_flags;
+
+	void		*host_priv;
+	ide_hwif_t	*cur_port;	/* for hosts requiring serialization */
+
+	/* used for hosts requiring serialization */
+	volatile unsigned long	host_busy;
+};
+
+#define IDE_HOST_BUSY 0
+
+/*
+ *  internal ide interrupt handler type
+ */
+typedef ide_startstop_t (ide_handler_t)(ide_drive_t *);
+typedef int (ide_expiry_t)(ide_drive_t *);
+
+/* used by ide-cd, ide-floppy, etc. */
+typedef void (xfer_func_t)(ide_drive_t *, struct ide_cmd *, void *, unsigned);
+
+extern struct mutex ide_setting_mtx;
+
+/*
+ * configurable drive settings
+ */
+
+#define DS_SYNC	(1 << 0)
+
+struct ide_devset {
+	int		(*get)(ide_drive_t *);
+	int		(*set)(ide_drive_t *, int);
+	unsigned int	flags;
+};
+
+#define __DEVSET(_flags, _get, _set) { \
+	.flags	= _flags, \
+	.get	= _get,	\
+	.set	= _set,	\
+}
+
+#define ide_devset_get(name, field) \
+static int get_##name(ide_drive_t *drive) \
+{ \
+	return drive->field; \
+}
+
+#define ide_devset_set(name, field) \
+static int set_##name(ide_drive_t *drive, int arg) \
+{ \
+	drive->field = arg; \
+	return 0; \
+}
+
+#define ide_devset_get_flag(name, flag) \
+static int get_##name(ide_drive_t *drive) \
+{ \
+	return !!(drive->dev_flags & flag); \
+}
+
+#define ide_devset_set_flag(name, flag) \
+static int set_##name(ide_drive_t *drive, int arg) \
+{ \
+	if (arg) \
+		drive->dev_flags |= flag; \
+	else \
+		drive->dev_flags &= ~flag; \
+	return 0; \
+}
+
+#define __IDE_DEVSET(_name, _flags, _get, _set) \
+const struct ide_devset ide_devset_##_name = \
+	__DEVSET(_flags, _get, _set)
+
+#define IDE_DEVSET(_name, _flags, _get, _set) \
+static __IDE_DEVSET(_name, _flags, _get, _set)
+
+#define ide_devset_rw(_name, _func) \
+IDE_DEVSET(_name, 0, get_##_func, set_##_func)
+
+#define ide_devset_w(_name, _func) \
+IDE_DEVSET(_name, 0, NULL, set_##_func)
+
+#define ide_ext_devset_rw(_name, _func) \
+__IDE_DEVSET(_name, 0, get_##_func, set_##_func)
+
+#define ide_ext_devset_rw_sync(_name, _func) \
+__IDE_DEVSET(_name, DS_SYNC, get_##_func, set_##_func)
+
+#define ide_decl_devset(_name) \
+extern const struct ide_devset ide_devset_##_name
+
+ide_decl_devset(io_32bit);
+ide_decl_devset(keepsettings);
+ide_decl_devset(pio_mode);
+ide_decl_devset(unmaskirq);
+ide_decl_devset(using_dma);
+
+#ifdef CONFIG_IDE_PROC_FS
+/*
+ * /proc/ide interface
+ */
+
+#define ide_devset_rw_field(_name, _field) \
+ide_devset_get(_name, _field); \
+ide_devset_set(_name, _field); \
+IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
+
+#define ide_devset_rw_flag(_name, _field) \
+ide_devset_get_flag(_name, _field); \
+ide_devset_set_flag(_name, _field); \
+IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
+
+struct ide_proc_devset {
+	const char		*name;
+	const struct ide_devset	*setting;
+	int			min, max;
+	int			(*mulf)(ide_drive_t *);
+	int			(*divf)(ide_drive_t *);
+};
+
+#define __IDE_PROC_DEVSET(_name, _min, _max, _mulf, _divf) { \
+	.name = __stringify(_name), \
+	.setting = &ide_devset_##_name, \
+	.min = _min, \
+	.max = _max, \
+	.mulf = _mulf, \
+	.divf = _divf, \
+}
+
+#define IDE_PROC_DEVSET(_name, _min, _max) \
+__IDE_PROC_DEVSET(_name, _min, _max, NULL, NULL)
+
+typedef struct {
+	const char	*name;
+	umode_t		mode;
+	const struct file_operations *proc_fops;
+} ide_proc_entry_t;
+
+void proc_ide_create(void);
+void proc_ide_destroy(void);
+void ide_proc_register_port(ide_hwif_t *);
+void ide_proc_port_register_devices(ide_hwif_t *);
+void ide_proc_unregister_device(ide_drive_t *);
+void ide_proc_unregister_port(ide_hwif_t *);
+void ide_proc_register_driver(ide_drive_t *, struct ide_driver *);
+void ide_proc_unregister_driver(ide_drive_t *, struct ide_driver *);
+
+extern const struct file_operations ide_capacity_proc_fops;
+extern const struct file_operations ide_geometry_proc_fops;
+#else
+static inline void proc_ide_create(void) { ; }
+static inline void proc_ide_destroy(void) { ; }
+static inline void ide_proc_register_port(ide_hwif_t *hwif) { ; }
+static inline void ide_proc_port_register_devices(ide_hwif_t *hwif) { ; }
+static inline void ide_proc_unregister_device(ide_drive_t *drive) { ; }
+static inline void ide_proc_unregister_port(ide_hwif_t *hwif) { ; }
+static inline void ide_proc_register_driver(ide_drive_t *drive,
+					    struct ide_driver *driver) { ; }
+static inline void ide_proc_unregister_driver(ide_drive_t *drive,
+					      struct ide_driver *driver) { ; }
+#endif
+
+enum {
+	/* enter/exit functions */
+	IDE_DBG_FUNC =			(1 << 0),
+	/* sense key/asc handling */
+	IDE_DBG_SENSE =			(1 << 1),
+	/* packet commands handling */
+	IDE_DBG_PC =			(1 << 2),
+	/* request handling */
+	IDE_DBG_RQ =			(1 << 3),
+	/* driver probing/setup */
+	IDE_DBG_PROBE =			(1 << 4),
+};
+
+/* DRV_NAME has to be defined in the driver before using the macro below */
+#define __ide_debug_log(lvl, fmt, args...)				\
+{									\
+	if (unlikely(drive->debug_mask & lvl))				\
+		printk(KERN_INFO DRV_NAME ": %s: " fmt "\n",		\
+					  __func__, ## args);		\
+}
+
+/*
+ * Power Management state machine (rq->pm->pm_step).
+ *
+ * For each step, the core calls ide_start_power_step() first.
+ * This can return:
+ *	- ide_stopped :	In this case, the core calls us back again unless
+ *			step have been set to ide_power_state_completed.
+ *	- ide_started :	In this case, the channel is left busy until an
+ *			async event (interrupt) occurs.
+ * Typically, ide_start_power_step() will issue a taskfile request with
+ * do_rw_taskfile().
+ *
+ * Upon reception of the interrupt, the core will call ide_complete_power_step()
+ * with the error code if any. This routine should update the step value
+ * and return. It should not start a new request. The core will call
+ * ide_start_power_step() for the new step value, unless step have been
+ * set to IDE_PM_COMPLETED.
+ */
+enum {
+	IDE_PM_START_SUSPEND,
+	IDE_PM_FLUSH_CACHE	= IDE_PM_START_SUSPEND,
+	IDE_PM_STANDBY,
+
+	IDE_PM_START_RESUME,
+	IDE_PM_RESTORE_PIO	= IDE_PM_START_RESUME,
+	IDE_PM_IDLE,
+	IDE_PM_RESTORE_DMA,
+
+	IDE_PM_COMPLETED,
+};
+
+int generic_ide_suspend(struct device *, pm_message_t);
+int generic_ide_resume(struct device *);
+
+void ide_complete_power_step(ide_drive_t *, struct request *);
+ide_startstop_t ide_start_power_step(ide_drive_t *, struct request *);
+void ide_complete_pm_rq(ide_drive_t *, struct request *);
+void ide_check_pm_state(ide_drive_t *, struct request *);
+
+/*
+ * Subdrivers support.
+ *
+ * The gendriver.owner field should be set to the module owner of this driver.
+ * The gendriver.name field should be set to the name of this driver
+ */
+struct ide_driver {
+	const char			*version;
+	ide_startstop_t	(*do_request)(ide_drive_t *, struct request *, sector_t);
+	struct device_driver	gen_driver;
+	int		(*probe)(ide_drive_t *);
+	void		(*remove)(ide_drive_t *);
+	void		(*resume)(ide_drive_t *);
+	void		(*shutdown)(ide_drive_t *);
+#ifdef CONFIG_IDE_PROC_FS
+	ide_proc_entry_t *		(*proc_entries)(ide_drive_t *);
+	const struct ide_proc_devset *	(*proc_devsets)(ide_drive_t *);
+#endif
+};
+
+#define to_ide_driver(drv) container_of(drv, struct ide_driver, gen_driver)
+
+int ide_device_get(ide_drive_t *);
+void ide_device_put(ide_drive_t *);
+
+struct ide_ioctl_devset {
+	unsigned int	get_ioctl;
+	unsigned int	set_ioctl;
+	const struct ide_devset *setting;
+};
+
+int ide_setting_ioctl(ide_drive_t *, struct block_device *, unsigned int,
+		      unsigned long, const struct ide_ioctl_devset *);
+
+int generic_ide_ioctl(ide_drive_t *, struct block_device *, unsigned, unsigned long);
+
+extern int ide_vlb_clk;
+extern int ide_pci_clk;
+
+int ide_end_rq(ide_drive_t *, struct request *, int, unsigned int);
+void ide_kill_rq(ide_drive_t *, struct request *);
+
+void __ide_set_handler(ide_drive_t *, ide_handler_t *, unsigned int);
+void ide_set_handler(ide_drive_t *, ide_handler_t *, unsigned int);
+
+void ide_execute_command(ide_drive_t *, struct ide_cmd *, ide_handler_t *,
+			 unsigned int);
+
+void ide_pad_transfer(ide_drive_t *, int, int);
+
+ide_startstop_t ide_error(ide_drive_t *, const char *, u8);
+
+void ide_fix_driveid(u16 *);
+
+extern void ide_fixstring(u8 *, const int, const int);
+
+int ide_busy_sleep(ide_drive_t *, unsigned long, int);
+
+int __ide_wait_stat(ide_drive_t *, u8, u8, unsigned long, u8 *);
+int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
+
+ide_startstop_t ide_do_park_unpark(ide_drive_t *, struct request *);
+ide_startstop_t ide_do_devset(ide_drive_t *, struct request *);
+
+extern ide_startstop_t ide_do_reset (ide_drive_t *);
+
+extern int ide_devset_execute(ide_drive_t *drive,
+			      const struct ide_devset *setting, int arg);
+
+void ide_complete_cmd(ide_drive_t *, struct ide_cmd *, u8, u8);
+int ide_complete_rq(ide_drive_t *, int, unsigned int);
+
+void ide_tf_readback(ide_drive_t *drive, struct ide_cmd *cmd);
+void ide_tf_dump(const char *, struct ide_cmd *);
+
+void ide_exec_command(ide_hwif_t *, u8);
+u8 ide_read_status(ide_hwif_t *);
+u8 ide_read_altstatus(ide_hwif_t *);
+void ide_write_devctl(ide_hwif_t *, u8);
+
+void ide_dev_select(ide_drive_t *);
+void ide_tf_load(ide_drive_t *, struct ide_taskfile *, u8);
+void ide_tf_read(ide_drive_t *, struct ide_taskfile *, u8);
+
+void ide_input_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int);
+void ide_output_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int);
+
+void SELECT_MASK(ide_drive_t *, int);
+
+u8 ide_read_error(ide_drive_t *);
+void ide_read_bcount_and_ireason(ide_drive_t *, u16 *, u8 *);
+
+int ide_check_ireason(ide_drive_t *, struct request *, int, int, int);
+
+int ide_check_atapi_device(ide_drive_t *, const char *);
+
+void ide_init_pc(struct ide_atapi_pc *);
+
+/* Disk head parking */
+extern wait_queue_head_t ide_park_wq;
+ssize_t ide_park_show(struct device *dev, struct device_attribute *attr,
+		      char *buf);
+ssize_t ide_park_store(struct device *dev, struct device_attribute *attr,
+		       const char *buf, size_t len);
+
+/*
+ * Special requests for ide-tape block device strategy routine.
+ *
+ * In order to service a character device command, we add special requests to
+ * the tail of our block device request queue and wait for their completion.
+ */
+enum {
+	REQ_IDETAPE_PC1		= (1 << 0), /* packet command (first stage) */
+	REQ_IDETAPE_PC2		= (1 << 1), /* packet command (second stage) */
+	REQ_IDETAPE_READ	= (1 << 2),
+	REQ_IDETAPE_WRITE	= (1 << 3),
+};
+
+int ide_queue_pc_tail(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *,
+		      void *, unsigned int);
+
+int ide_do_test_unit_ready(ide_drive_t *, struct gendisk *);
+int ide_do_start_stop(ide_drive_t *, struct gendisk *, int);
+int ide_set_media_lock(ide_drive_t *, struct gendisk *, int);
+void ide_create_request_sense_cmd(ide_drive_t *, struct ide_atapi_pc *);
+void ide_retry_pc(ide_drive_t *drive);
+
+void ide_prep_sense(ide_drive_t *drive, struct request *rq);
+int ide_queue_sense_rq(ide_drive_t *drive, void *special);
+
+int ide_cd_expiry(ide_drive_t *);
+
+int ide_cd_get_xferlen(struct request *);
+
+ide_startstop_t ide_issue_pc(ide_drive_t *, struct ide_cmd *);
+
+ide_startstop_t do_rw_taskfile(ide_drive_t *, struct ide_cmd *);
+
+void ide_pio_bytes(ide_drive_t *, struct ide_cmd *, unsigned int, unsigned int);
+
+void ide_finish_cmd(ide_drive_t *, struct ide_cmd *, u8);
+
+int ide_raw_taskfile(ide_drive_t *, struct ide_cmd *, u8 *, u16);
+int ide_no_data_taskfile(ide_drive_t *, struct ide_cmd *);
+
+int ide_taskfile_ioctl(ide_drive_t *, unsigned long);
+
+int ide_dev_read_id(ide_drive_t *, u8, u16 *, int);
+
+extern int ide_driveid_update(ide_drive_t *);
+extern int ide_config_drive_speed(ide_drive_t *, u8);
+extern u8 eighty_ninty_three (ide_drive_t *);
+extern int taskfile_lib_get_identify(ide_drive_t *drive, u8 *);
+
+extern int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout);
+
+extern void ide_stall_queue(ide_drive_t *drive, unsigned long timeout);
+
+extern void ide_timer_expiry(unsigned long);
+extern irqreturn_t ide_intr(int irq, void *dev_id);
+extern void do_ide_request(struct request_queue *);
+extern void ide_requeue_and_plug(ide_drive_t *drive, struct request *rq);
+
+void ide_init_disk(struct gendisk *, ide_drive_t *);
+
+#ifdef CONFIG_IDEPCI_PCIBUS_ORDER
+extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner, const char *mod_name);
+#define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME)
+#else
+#define ide_pci_register_driver(d) pci_register_driver(d)
+#endif
+
+static inline int ide_pci_is_in_compatibility_mode(struct pci_dev *dev)
+{
+	if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 5) != 5)
+		return 1;
+	return 0;
+}
+
+void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *,
+			 struct ide_hw *, struct ide_hw **);
+void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
+
+#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
+int ide_pci_set_master(struct pci_dev *, const char *);
+unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *);
+int ide_pci_check_simplex(ide_hwif_t *, const struct ide_port_info *);
+int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *);
+#else
+static inline int ide_hwif_setup_dma(ide_hwif_t *hwif,
+				     const struct ide_port_info *d)
+{
+	return -EINVAL;
+}
+#endif
+
+struct ide_pci_enablebit {
+	u8	reg;	/* byte pci reg holding the enable-bit */
+	u8	mask;	/* mask to isolate the enable-bit */
+	u8	val;	/* value of masked reg when "enabled" */
+};
+
+enum {
+	/* Uses ISA control ports not PCI ones. */
+	IDE_HFLAG_ISA_PORTS		= (1 << 0),
+	/* single port device */
+	IDE_HFLAG_SINGLE		= (1 << 1),
+	/* don't use legacy PIO blacklist */
+	IDE_HFLAG_PIO_NO_BLACKLIST	= (1 << 2),
+	/* set for the second port of QD65xx */
+	IDE_HFLAG_QD_2ND_PORT		= (1 << 3),
+	/* use PIO8/9 for prefetch off/on */
+	IDE_HFLAG_ABUSE_PREFETCH	= (1 << 4),
+	/* use PIO6/7 for fast-devsel off/on */
+	IDE_HFLAG_ABUSE_FAST_DEVSEL	= (1 << 5),
+	/* use 100-102 and 200-202 PIO values to set DMA modes */
+	IDE_HFLAG_ABUSE_DMA_MODES	= (1 << 6),
+	/*
+	 * keep DMA setting when programming PIO mode, may be used only
+	 * for hosts which have separate PIO and DMA timings (ie. PMAC)
+	 */
+	IDE_HFLAG_SET_PIO_MODE_KEEP_DMA	= (1 << 7),
+	/* program host for the transfer mode after programming device */
+	IDE_HFLAG_POST_SET_MODE		= (1 << 8),
+	/* don't program host/device for the transfer mode ("smart" hosts) */
+	IDE_HFLAG_NO_SET_MODE		= (1 << 9),
+	/* trust BIOS for programming chipset/device for DMA */
+	IDE_HFLAG_TRUST_BIOS_FOR_DMA	= (1 << 10),
+	/* host is CS5510/CS5520 */
+	IDE_HFLAG_CS5520		= (1 << 11),
+	/* ATAPI DMA is unsupported */
+	IDE_HFLAG_NO_ATAPI_DMA		= (1 << 12),
+	/* set if host is a "non-bootable" controller */
+	IDE_HFLAG_NON_BOOTABLE		= (1 << 13),
+	/* host doesn't support DMA */
+	IDE_HFLAG_NO_DMA		= (1 << 14),
+	/* check if host is PCI IDE device before allowing DMA */
+	IDE_HFLAG_NO_AUTODMA		= (1 << 15),
+	/* host uses MMIO */
+	IDE_HFLAG_MMIO			= (1 << 16),
+	/* no LBA48 */
+	IDE_HFLAG_NO_LBA48		= (1 << 17),
+	/* no LBA48 DMA */
+	IDE_HFLAG_NO_LBA48_DMA		= (1 << 18),
+	/* data FIFO is cleared by an error */
+	IDE_HFLAG_ERROR_STOPS_FIFO	= (1 << 19),
+	/* serialize ports */
+	IDE_HFLAG_SERIALIZE		= (1 << 20),
+	/* host is DTC2278 */
+	IDE_HFLAG_DTC2278		= (1 << 21),
+	/* 4 devices on a single set of I/O ports */
+	IDE_HFLAG_4DRIVES		= (1 << 22),
+	/* host is TRM290 */
+	IDE_HFLAG_TRM290		= (1 << 23),
+	/* use 32-bit I/O ops */
+	IDE_HFLAG_IO_32BIT		= (1 << 24),
+	/* unmask IRQs */
+	IDE_HFLAG_UNMASK_IRQS		= (1 << 25),
+	IDE_HFLAG_BROKEN_ALTSTATUS	= (1 << 26),
+	/* serialize ports if DMA is possible (for sl82c105) */
+	IDE_HFLAG_SERIALIZE_DMA		= (1 << 27),
+	/* force host out of "simplex" mode */
+	IDE_HFLAG_CLEAR_SIMPLEX		= (1 << 28),
+	/* DSC overlap is unsupported */
+	IDE_HFLAG_NO_DSC		= (1 << 29),
+	/* never use 32-bit I/O ops */
+	IDE_HFLAG_NO_IO_32BIT		= (1 << 30),
+	/* never unmask IRQs */
+	IDE_HFLAG_NO_UNMASK_IRQS	= (1 << 31),
+};
+
+#ifdef CONFIG_BLK_DEV_OFFBOARD
+# define IDE_HFLAG_OFF_BOARD	0
+#else
+# define IDE_HFLAG_OFF_BOARD	IDE_HFLAG_NON_BOOTABLE
+#endif
+
+struct ide_port_info {
+	char			*name;
+
+	int			(*init_chipset)(struct pci_dev *);
+
+	void			(*get_lock)(irq_handler_t, void *);
+	void			(*release_lock)(void);
+
+	void			(*init_iops)(ide_hwif_t *);
+	void                    (*init_hwif)(ide_hwif_t *);
+	int			(*init_dma)(ide_hwif_t *,
+					    const struct ide_port_info *);
+
+	const struct ide_tp_ops		*tp_ops;
+	const struct ide_port_ops	*port_ops;
+	const struct ide_dma_ops	*dma_ops;
+
+	struct ide_pci_enablebit	enablebits[2];
+
+	hwif_chipset_t		chipset;
+
+	u16			max_sectors;	/* if < than the default one */
+
+	u32			host_flags;
+
+	int			irq_flags;
+
+	u8			pio_mask;
+	u8			swdma_mask;
+	u8			mwdma_mask;
+	u8			udma_mask;
+};
+
+int ide_pci_init_one(struct pci_dev *, const struct ide_port_info *, void *);
+int ide_pci_init_two(struct pci_dev *, struct pci_dev *,
+		     const struct ide_port_info *, void *);
+void ide_pci_remove(struct pci_dev *);
+
+#ifdef CONFIG_PM
+int ide_pci_suspend(struct pci_dev *, pm_message_t);
+int ide_pci_resume(struct pci_dev *);
+#else
+#define ide_pci_suspend NULL
+#define ide_pci_resume NULL
+#endif
+
+void ide_map_sg(ide_drive_t *, struct ide_cmd *);
+void ide_init_sg_cmd(struct ide_cmd *, unsigned int);
+
+#define BAD_DMA_DRIVE		0
+#define GOOD_DMA_DRIVE		1
+
+struct drive_list_entry {
+	const char *id_model;
+	const char *id_firmware;
+};
+
+int ide_in_drive_list(u16 *, const struct drive_list_entry *);
+
+#ifdef CONFIG_BLK_DEV_IDEDMA
+int ide_dma_good_drive(ide_drive_t *);
+int __ide_dma_bad_drive(ide_drive_t *);
+
+u8 ide_find_dma_mode(ide_drive_t *, u8);
+
+static inline u8 ide_max_dma_mode(ide_drive_t *drive)
+{
+	return ide_find_dma_mode(drive, XFER_UDMA_6);
+}
+
+void ide_dma_off_quietly(ide_drive_t *);
+void ide_dma_off(ide_drive_t *);
+void ide_dma_on(ide_drive_t *);
+int ide_set_dma(ide_drive_t *);
+void ide_check_dma_crc(ide_drive_t *);
+ide_startstop_t ide_dma_intr(ide_drive_t *);
+
+int ide_allocate_dma_engine(ide_hwif_t *);
+void ide_release_dma_engine(ide_hwif_t *);
+
+int ide_dma_prepare(ide_drive_t *, struct ide_cmd *);
+void ide_dma_unmap_sg(ide_drive_t *, struct ide_cmd *);
+
+#ifdef CONFIG_BLK_DEV_IDEDMA_SFF
+int config_drive_for_dma(ide_drive_t *);
+int ide_build_dmatable(ide_drive_t *, struct ide_cmd *);
+void ide_dma_host_set(ide_drive_t *, int);
+int ide_dma_setup(ide_drive_t *, struct ide_cmd *);
+extern void ide_dma_start(ide_drive_t *);
+int ide_dma_end(ide_drive_t *);
+int ide_dma_test_irq(ide_drive_t *);
+int ide_dma_sff_timer_expiry(ide_drive_t *);
+u8 ide_dma_sff_read_status(ide_hwif_t *);
+extern const struct ide_dma_ops sff_dma_ops;
+#else
+static inline int config_drive_for_dma(ide_drive_t *drive) { return 0; }
+#endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
+
+void ide_dma_lost_irq(ide_drive_t *);
+ide_startstop_t ide_dma_timeout_retry(ide_drive_t *, int);
+
+#else
+static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; }
+static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
+static inline void ide_dma_off_quietly(ide_drive_t *drive) { ; }
+static inline void ide_dma_off(ide_drive_t *drive) { ; }
+static inline void ide_dma_on(ide_drive_t *drive) { ; }
+static inline void ide_dma_verbose(ide_drive_t *drive) { ; }
+static inline int ide_set_dma(ide_drive_t *drive) { return 1; }
+static inline void ide_check_dma_crc(ide_drive_t *drive) { ; }
+static inline ide_startstop_t ide_dma_intr(ide_drive_t *drive) { return ide_stopped; }
+static inline ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) { return ide_stopped; }
+static inline void ide_release_dma_engine(ide_hwif_t *hwif) { ; }
+static inline int ide_dma_prepare(ide_drive_t *drive,
+				  struct ide_cmd *cmd) { return 1; }
+static inline void ide_dma_unmap_sg(ide_drive_t *drive,
+				    struct ide_cmd *cmd) { ; }
+#endif /* CONFIG_BLK_DEV_IDEDMA */
+
+#ifdef CONFIG_BLK_DEV_IDEACPI
+int ide_acpi_init(void);
+bool ide_port_acpi(ide_hwif_t *hwif);
+extern int ide_acpi_exec_tfs(ide_drive_t *drive);
+extern void ide_acpi_get_timing(ide_hwif_t *hwif);
+extern void ide_acpi_push_timing(ide_hwif_t *hwif);
+void ide_acpi_init_port(ide_hwif_t *);
+void ide_acpi_port_init_devices(ide_hwif_t *);
+extern void ide_acpi_set_state(ide_hwif_t *hwif, int on);
+#else
+static inline int ide_acpi_init(void) { return 0; }
+static inline bool ide_port_acpi(ide_hwif_t *hwif) { return 0; }
+static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; }
+static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; }
+static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; }
+static inline void ide_acpi_init_port(ide_hwif_t *hwif) { ; }
+static inline void ide_acpi_port_init_devices(ide_hwif_t *hwif) { ; }
+static inline void ide_acpi_set_state(ide_hwif_t *hwif, int on) {}
+#endif
+
+void ide_register_region(struct gendisk *);
+void ide_unregister_region(struct gendisk *);
+
+void ide_check_nien_quirk_list(ide_drive_t *);
+void ide_undecoded_slave(ide_drive_t *);
+
+void ide_port_apply_params(ide_hwif_t *);
+int ide_sysfs_register_port(ide_hwif_t *);
+
+struct ide_host *ide_host_alloc(const struct ide_port_info *, struct ide_hw **,
+				unsigned int);
+void ide_host_free(struct ide_host *);
+int ide_host_register(struct ide_host *, const struct ide_port_info *,
+		      struct ide_hw **);
+int ide_host_add(const struct ide_port_info *, struct ide_hw **, unsigned int,
+		 struct ide_host **);
+void ide_host_remove(struct ide_host *);
+int ide_legacy_device_add(const struct ide_port_info *, unsigned long);
+void ide_port_unregister_devices(ide_hwif_t *);
+void ide_port_scan(ide_hwif_t *);
+
+static inline void *ide_get_hwifdata (ide_hwif_t * hwif)
+{
+	return hwif->hwif_data;
+}
+
+static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data)
+{
+	hwif->hwif_data = data;
+}
+
+extern void ide_toggle_bounce(ide_drive_t *drive, int on);
+
+u64 ide_get_lba_addr(struct ide_cmd *, int);
+u8 ide_dump_status(ide_drive_t *, const char *, u8);
+
+struct ide_timing {
+	u8  mode;
+	u8  setup;	/* t1 */
+	u16 act8b;	/* t2 for 8-bit io */
+	u16 rec8b;	/* t2i for 8-bit io */
+	u16 cyc8b;	/* t0 for 8-bit io */
+	u16 active;	/* t2 or tD */
+	u16 recover;	/* t2i or tK */
+	u16 cycle;	/* t0 */
+	u16 udma;	/* t2CYCTYP/2 */
+};
+
+enum {
+	IDE_TIMING_SETUP	= (1 << 0),
+	IDE_TIMING_ACT8B	= (1 << 1),
+	IDE_TIMING_REC8B	= (1 << 2),
+	IDE_TIMING_CYC8B	= (1 << 3),
+	IDE_TIMING_8BIT		= IDE_TIMING_ACT8B | IDE_TIMING_REC8B |
+				  IDE_TIMING_CYC8B,
+	IDE_TIMING_ACTIVE	= (1 << 4),
+	IDE_TIMING_RECOVER	= (1 << 5),
+	IDE_TIMING_CYCLE	= (1 << 6),
+	IDE_TIMING_UDMA		= (1 << 7),
+	IDE_TIMING_ALL		= IDE_TIMING_SETUP | IDE_TIMING_8BIT |
+				  IDE_TIMING_ACTIVE | IDE_TIMING_RECOVER |
+				  IDE_TIMING_CYCLE | IDE_TIMING_UDMA,
+};
+
+struct ide_timing *ide_timing_find_mode(u8);
+u16 ide_pio_cycle_time(ide_drive_t *, u8);
+void ide_timing_merge(struct ide_timing *, struct ide_timing *,
+		      struct ide_timing *, unsigned int);
+int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int);
+
+#ifdef CONFIG_IDE_XFER_MODE
+int ide_scan_pio_blacklist(char *);
+const char *ide_xfer_verbose(u8);
+int ide_pio_need_iordy(ide_drive_t *, const u8);
+int ide_set_pio_mode(ide_drive_t *, u8);
+int ide_set_dma_mode(ide_drive_t *, u8);
+void ide_set_pio(ide_drive_t *, u8);
+int ide_set_xfer_rate(ide_drive_t *, u8);
+#else
+static inline void ide_set_pio(ide_drive_t *drive, u8 pio) { ; }
+static inline int ide_set_xfer_rate(ide_drive_t *drive, u8 rate) { return -1; }
+#endif
+
+static inline void ide_set_max_pio(ide_drive_t *drive)
+{
+	ide_set_pio(drive, 255);
+}
+
+char *ide_media_string(ide_drive_t *);
+
+extern struct device_attribute ide_dev_attrs[];
+extern struct bus_type ide_bus_type;
+extern struct class *ide_port_class;
+
+static inline void ide_dump_identify(u8 *id)
+{
+	print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 2, id, 512, 0);
+}
+
+static inline int hwif_to_node(ide_hwif_t *hwif)
+{
+	return hwif->dev ? dev_to_node(hwif->dev) : -1;
+}
+
+static inline ide_drive_t *ide_get_pair_dev(ide_drive_t *drive)
+{
+	ide_drive_t *peer = drive->hwif->devices[(drive->dn ^ 1) & 1];
+
+	return (peer->dev_flags & IDE_DFLAG_PRESENT) ? peer : NULL;
+}
+
+static inline void *ide_get_drivedata(ide_drive_t *drive)
+{
+	return drive->drive_data;
+}
+
+static inline void ide_set_drivedata(ide_drive_t *drive, void *data)
+{
+	drive->drive_data = data;
+}
+
+#define ide_port_for_each_dev(i, dev, port) \
+	for ((i) = 0; ((dev) = (port)->devices[i]) || (i) < MAX_DRIVES; (i)++)
+
+#define ide_port_for_each_present_dev(i, dev, port) \
+	for ((i) = 0; ((dev) = (port)->devices[i]) || (i) < MAX_DRIVES; (i)++) \
+		if ((dev)->dev_flags & IDE_DFLAG_PRESENT)
+
+#define ide_host_for_each_port(i, port, host) \
+	for ((i) = 0; ((port) = (host)->ports[i]) || (i) < MAX_HOST_PORTS; (i)++)
+
+#endif /* _IDE_H */
diff --git a/include/linux/idr.h b/include/linux/idr.h
new file mode 100644
index 00000000..255491cf
--- /dev/null
+++ b/include/linux/idr.h
@@ -0,0 +1,155 @@
+/*
+ * include/linux/idr.h
+ * 
+ * 2002-10-18  written by Jim Houston jim.houston@ccur.com
+ *	Copyright (C) 2002 by Concurrent Computer Corporation
+ *	Distributed under the GNU GPL license version 2.
+ *
+ * Small id to pointer translation service avoiding fixed sized
+ * tables.
+ */
+
+#ifndef __IDR_H__
+#define __IDR_H__
+
+#include <linux/types.h>
+#include <linux/bitops.h>
+#include <linux/init.h>
+#include <linux/rcupdate.h>
+
+#if BITS_PER_LONG == 32
+# define IDR_BITS 5
+# define IDR_FULL 0xfffffffful
+/* We can only use two of the bits in the top level because there is
+   only one possible bit in the top level (5 bits * 7 levels = 35
+   bits, but you only use 31 bits in the id). */
+# define TOP_LEVEL_FULL (IDR_FULL >> 30)
+#elif BITS_PER_LONG == 64
+# define IDR_BITS 6
+# define IDR_FULL 0xfffffffffffffffful
+/* We can only use two of the bits in the top level because there is
+   only one possible bit in the top level (6 bits * 6 levels = 36
+   bits, but you only use 31 bits in the id). */
+# define TOP_LEVEL_FULL (IDR_FULL >> 62)
+#else
+# error "BITS_PER_LONG is not 32 or 64"
+#endif
+
+#define IDR_SIZE (1 << IDR_BITS)
+#define IDR_MASK ((1 << IDR_BITS)-1)
+
+#define MAX_ID_SHIFT (sizeof(int)*8 - 1)
+#define MAX_ID_BIT (1U << MAX_ID_SHIFT)
+#define MAX_ID_MASK (MAX_ID_BIT - 1)
+
+/* Leave the possibility of an incomplete final layer */
+#define MAX_LEVEL (MAX_ID_SHIFT + IDR_BITS - 1) / IDR_BITS
+
+/* Number of id_layer structs to leave in free list */
+#define IDR_FREE_MAX MAX_LEVEL + MAX_LEVEL
+
+struct idr_layer {
+	unsigned long		 bitmap; /* A zero bit means "space here" */
+	struct idr_layer __rcu	*ary[1<<IDR_BITS];
+	int			 count;	 /* When zero, we can release it */
+	int			 layer;	 /* distance from leaf */
+	struct rcu_head		 rcu_head;
+};
+
+struct idr {
+	struct idr_layer __rcu *top;
+	struct idr_layer *id_free;
+	int		  layers; /* only valid without concurrent changes */
+	int		  id_free_cnt;
+	spinlock_t	  lock;
+};
+
+#define IDR_INIT(name)						\
+{								\
+	.top		= NULL,					\
+	.id_free	= NULL,					\
+	.layers 	= 0,					\
+	.id_free_cnt	= 0,					\
+	.lock		= __SPIN_LOCK_UNLOCKED(name.lock),	\
+}
+#define DEFINE_IDR(name)	struct idr name = IDR_INIT(name)
+
+/* Actions to be taken after a call to _idr_sub_alloc */
+#define IDR_NEED_TO_GROW -2
+#define IDR_NOMORE_SPACE -3
+
+#define _idr_rc_to_errno(rc) ((rc) == -1 ? -EAGAIN : -ENOSPC)
+
+/**
+ * DOC: idr sync
+ * idr synchronization (stolen from radix-tree.h)
+ *
+ * idr_find() is able to be called locklessly, using RCU. The caller must
+ * ensure calls to this function are made within rcu_read_lock() regions.
+ * Other readers (lock-free or otherwise) and modifications may be running
+ * concurrently.
+ *
+ * It is still required that the caller manage the synchronization and
+ * lifetimes of the items. So if RCU lock-free lookups are used, typically
+ * this would mean that the items have their own locks, or are amenable to
+ * lock-free access; and that the items are freed by RCU (or only freed after
+ * having been deleted from the idr tree *and* a synchronize_rcu() grace
+ * period).
+ */
+
+/*
+ * This is what we export.
+ */
+
+void *idr_find(struct idr *idp, int id);
+int idr_pre_get(struct idr *idp, gfp_t gfp_mask);
+int idr_get_new(struct idr *idp, void *ptr, int *id);
+int idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id);
+int idr_for_each(struct idr *idp,
+		 int (*fn)(int id, void *p, void *data), void *data);
+void *idr_get_next(struct idr *idp, int *nextid);
+void *idr_replace(struct idr *idp, void *ptr, int id);
+void idr_remove(struct idr *idp, int id);
+void idr_remove_all(struct idr *idp);
+void idr_destroy(struct idr *idp);
+void idr_init(struct idr *idp);
+
+
+/*
+ * IDA - IDR based id allocator, use when translation from id to
+ * pointer isn't necessary.
+ *
+ * IDA_BITMAP_LONGS is calculated to be one less to accommodate
+ * ida_bitmap->nr_busy so that the whole struct fits in 128 bytes.
+ */
+#define IDA_CHUNK_SIZE		128	/* 128 bytes per chunk */
+#define IDA_BITMAP_LONGS	(IDA_CHUNK_SIZE / sizeof(long) - 1)
+#define IDA_BITMAP_BITS 	(IDA_BITMAP_LONGS * sizeof(long) * 8)
+
+struct ida_bitmap {
+	long			nr_busy;
+	unsigned long		bitmap[IDA_BITMAP_LONGS];
+};
+
+struct ida {
+	struct idr		idr;
+	struct ida_bitmap	*free_bitmap;
+};
+
+#define IDA_INIT(name)		{ .idr = IDR_INIT(name), .free_bitmap = NULL, }
+#define DEFINE_IDA(name)	struct ida name = IDA_INIT(name)
+
+int ida_pre_get(struct ida *ida, gfp_t gfp_mask);
+int ida_get_new_above(struct ida *ida, int starting_id, int *p_id);
+int ida_get_new(struct ida *ida, int *p_id);
+void ida_remove(struct ida *ida, int id);
+void ida_destroy(struct ida *ida);
+void ida_init(struct ida *ida);
+
+int ida_simple_get(struct ida *ida, unsigned int start, unsigned int end,
+		   gfp_t gfp_mask);
+void ida_simple_remove(struct ida *ida, unsigned int id);
+
+void __init idr_init_cache(void);
+
+#endif /* __IDR_H__ */
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
new file mode 100644
index 00000000..210e2c32
--- /dev/null
+++ b/include/linux/ieee80211.h
@@ -0,0 +1,1878 @@
+/*
+ * IEEE 802.11 defines
+ *
+ * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+ * <jkmaline@cc.hut.fi>
+ * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+ * Copyright (c) 2005, Devicescape Software, Inc.
+ * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef LINUX_IEEE80211_H
+#define LINUX_IEEE80211_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/*
+ * DS bit usage
+ *
+ * TA = transmitter address
+ * RA = receiver address
+ * DA = destination address
+ * SA = source address
+ *
+ * ToDS    FromDS  A1(RA)  A2(TA)  A3      A4      Use
+ * -----------------------------------------------------------------
+ *  0       0       DA      SA      BSSID   -       IBSS/DLS
+ *  0       1       DA      BSSID   SA      -       AP -> STA
+ *  1       0       BSSID   SA      DA      -       AP <- STA
+ *  1       1       RA      TA      DA      SA      unspecified (WDS)
+ */
+
+#define FCS_LEN 4
+
+#define IEEE80211_FCTL_VERS		0x0003
+#define IEEE80211_FCTL_FTYPE		0x000c
+#define IEEE80211_FCTL_STYPE		0x00f0
+#define IEEE80211_FCTL_TODS		0x0100
+#define IEEE80211_FCTL_FROMDS		0x0200
+#define IEEE80211_FCTL_MOREFRAGS	0x0400
+#define IEEE80211_FCTL_RETRY		0x0800
+#define IEEE80211_FCTL_PM		0x1000
+#define IEEE80211_FCTL_MOREDATA		0x2000
+#define IEEE80211_FCTL_PROTECTED	0x4000
+#define IEEE80211_FCTL_ORDER		0x8000
+
+#define IEEE80211_SCTL_FRAG		0x000F
+#define IEEE80211_SCTL_SEQ		0xFFF0
+
+#define IEEE80211_FTYPE_MGMT		0x0000
+#define IEEE80211_FTYPE_CTL		0x0004
+#define IEEE80211_FTYPE_DATA		0x0008
+
+/* management */
+#define IEEE80211_STYPE_ASSOC_REQ	0x0000
+#define IEEE80211_STYPE_ASSOC_RESP	0x0010
+#define IEEE80211_STYPE_REASSOC_REQ	0x0020
+#define IEEE80211_STYPE_REASSOC_RESP	0x0030
+#define IEEE80211_STYPE_PROBE_REQ	0x0040
+#define IEEE80211_STYPE_PROBE_RESP	0x0050
+#define IEEE80211_STYPE_BEACON		0x0080
+#define IEEE80211_STYPE_ATIM		0x0090
+#define IEEE80211_STYPE_DISASSOC	0x00A0
+#define IEEE80211_STYPE_AUTH		0x00B0
+#define IEEE80211_STYPE_DEAUTH		0x00C0
+#define IEEE80211_STYPE_ACTION		0x00D0
+
+/* control */
+#define IEEE80211_STYPE_BACK_REQ	0x0080
+#define IEEE80211_STYPE_BACK		0x0090
+#define IEEE80211_STYPE_PSPOLL		0x00A0
+#define IEEE80211_STYPE_RTS		0x00B0
+#define IEEE80211_STYPE_CTS		0x00C0
+#define IEEE80211_STYPE_ACK		0x00D0
+#define IEEE80211_STYPE_CFEND		0x00E0
+#define IEEE80211_STYPE_CFENDACK	0x00F0
+
+/* data */
+#define IEEE80211_STYPE_DATA			0x0000
+#define IEEE80211_STYPE_DATA_CFACK		0x0010
+#define IEEE80211_STYPE_DATA_CFPOLL		0x0020
+#define IEEE80211_STYPE_DATA_CFACKPOLL		0x0030
+#define IEEE80211_STYPE_NULLFUNC		0x0040
+#define IEEE80211_STYPE_CFACK			0x0050
+#define IEEE80211_STYPE_CFPOLL			0x0060
+#define IEEE80211_STYPE_CFACKPOLL		0x0070
+#define IEEE80211_STYPE_QOS_DATA		0x0080
+#define IEEE80211_STYPE_QOS_DATA_CFACK		0x0090
+#define IEEE80211_STYPE_QOS_DATA_CFPOLL		0x00A0
+#define IEEE80211_STYPE_QOS_DATA_CFACKPOLL	0x00B0
+#define IEEE80211_STYPE_QOS_NULLFUNC		0x00C0
+#define IEEE80211_STYPE_QOS_CFACK		0x00D0
+#define IEEE80211_STYPE_QOS_CFPOLL		0x00E0
+#define IEEE80211_STYPE_QOS_CFACKPOLL		0x00F0
+
+
+/* miscellaneous IEEE 802.11 constants */
+#define IEEE80211_MAX_FRAG_THRESHOLD	2352
+#define IEEE80211_MAX_RTS_THRESHOLD	2353
+#define IEEE80211_MAX_AID		2007
+#define IEEE80211_MAX_TIM_LEN		251
+/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
+   6.2.1.1.2.
+
+   802.11e clarifies the figure in section 7.1.2. The frame body is
+   up to 2304 octets long (maximum MSDU size) plus any crypt overhead. */
+#define IEEE80211_MAX_DATA_LEN		2304
+/* 30 byte 4 addr hdr, 2 byte QoS, 2304 byte MSDU, 12 byte crypt, 4 byte FCS */
+#define IEEE80211_MAX_FRAME_LEN		2352
+
+#define IEEE80211_MAX_SSID_LEN		32
+
+#define IEEE80211_MAX_MESH_ID_LEN	32
+
+#define IEEE80211_QOS_CTL_LEN		2
+/* 1d tag mask */
+#define IEEE80211_QOS_CTL_TAG1D_MASK		0x0007
+/* TID mask */
+#define IEEE80211_QOS_CTL_TID_MASK		0x000f
+/* EOSP */
+#define IEEE80211_QOS_CTL_EOSP			0x0010
+/* ACK policy */
+#define IEEE80211_QOS_CTL_ACK_POLICY_NORMAL	0x0000
+#define IEEE80211_QOS_CTL_ACK_POLICY_NOACK	0x0020
+#define IEEE80211_QOS_CTL_ACK_POLICY_NO_EXPL	0x0040
+#define IEEE80211_QOS_CTL_ACK_POLICY_BLOCKACK	0x0060
+#define IEEE80211_QOS_CTL_ACK_POLICY_MASK	0x0060
+/* A-MSDU 802.11n */
+#define IEEE80211_QOS_CTL_A_MSDU_PRESENT	0x0080
+/* Mesh Control 802.11s */
+#define IEEE80211_QOS_CTL_MESH_CONTROL_PRESENT  0x0100
+
+/* U-APSD queue for WMM IEs sent by AP */
+#define IEEE80211_WMM_IE_AP_QOSINFO_UAPSD	(1<<7)
+#define IEEE80211_WMM_IE_AP_QOSINFO_PARAM_SET_CNT_MASK	0x0f
+
+/* U-APSD queues for WMM IEs sent by STA */
+#define IEEE80211_WMM_IE_STA_QOSINFO_AC_VO	(1<<0)
+#define IEEE80211_WMM_IE_STA_QOSINFO_AC_VI	(1<<1)
+#define IEEE80211_WMM_IE_STA_QOSINFO_AC_BK	(1<<2)
+#define IEEE80211_WMM_IE_STA_QOSINFO_AC_BE	(1<<3)
+#define IEEE80211_WMM_IE_STA_QOSINFO_AC_MASK	0x0f
+
+/* U-APSD max SP length for WMM IEs sent by STA */
+#define IEEE80211_WMM_IE_STA_QOSINFO_SP_ALL	0x00
+#define IEEE80211_WMM_IE_STA_QOSINFO_SP_2	0x01
+#define IEEE80211_WMM_IE_STA_QOSINFO_SP_4	0x02
+#define IEEE80211_WMM_IE_STA_QOSINFO_SP_6	0x03
+#define IEEE80211_WMM_IE_STA_QOSINFO_SP_MASK	0x03
+#define IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT	5
+
+#define IEEE80211_HT_CTL_LEN		4
+
+struct ieee80211_hdr {
+	__le16 frame_control;
+	__le16 duration_id;
+	u8 addr1[6];
+	u8 addr2[6];
+	u8 addr3[6];
+	__le16 seq_ctrl;
+	u8 addr4[6];
+} __attribute__ ((packed));
+
+struct ieee80211_hdr_3addr {
+	__le16 frame_control;
+	__le16 duration_id;
+	u8 addr1[6];
+	u8 addr2[6];
+	u8 addr3[6];
+	__le16 seq_ctrl;
+} __attribute__ ((packed));
+
+struct ieee80211_qos_hdr {
+	__le16 frame_control;
+	__le16 duration_id;
+	u8 addr1[6];
+	u8 addr2[6];
+	u8 addr3[6];
+	__le16 seq_ctrl;
+	__le16 qos_ctrl;
+} __attribute__ ((packed));
+
+/**
+ * ieee80211_has_tods - check if IEEE80211_FCTL_TODS is set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_has_tods(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_TODS)) != 0;
+}
+
+/**
+ * ieee80211_has_fromds - check if IEEE80211_FCTL_FROMDS is set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_has_fromds(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FROMDS)) != 0;
+}
+
+/**
+ * ieee80211_has_a4 - check if IEEE80211_FCTL_TODS and IEEE80211_FCTL_FROMDS are set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_has_a4(__le16 fc)
+{
+	__le16 tmp = cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS);
+	return (fc & tmp) == tmp;
+}
+
+/**
+ * ieee80211_has_morefrags - check if IEEE80211_FCTL_MOREFRAGS is set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_has_morefrags(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_MOREFRAGS)) != 0;
+}
+
+/**
+ * ieee80211_has_retry - check if IEEE80211_FCTL_RETRY is set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_has_retry(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_RETRY)) != 0;
+}
+
+/**
+ * ieee80211_has_pm - check if IEEE80211_FCTL_PM is set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_has_pm(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_PM)) != 0;
+}
+
+/**
+ * ieee80211_has_moredata - check if IEEE80211_FCTL_MOREDATA is set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_has_moredata(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_MOREDATA)) != 0;
+}
+
+/**
+ * ieee80211_has_protected - check if IEEE80211_FCTL_PROTECTED is set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_has_protected(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_PROTECTED)) != 0;
+}
+
+/**
+ * ieee80211_has_order - check if IEEE80211_FCTL_ORDER is set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_has_order(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_ORDER)) != 0;
+}
+
+/**
+ * ieee80211_is_mgmt - check if type is IEEE80211_FTYPE_MGMT
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_mgmt(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT);
+}
+
+/**
+ * ieee80211_is_ctl - check if type is IEEE80211_FTYPE_CTL
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_ctl(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_CTL);
+}
+
+/**
+ * ieee80211_is_data - check if type is IEEE80211_FTYPE_DATA
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_data(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_DATA);
+}
+
+/**
+ * ieee80211_is_data_qos - check if type is IEEE80211_FTYPE_DATA and IEEE80211_STYPE_QOS_DATA is set
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_data_qos(__le16 fc)
+{
+	/*
+	 * mask with QOS_DATA rather than IEEE80211_FCTL_STYPE as we just need
+	 * to check the one bit
+	 */
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_STYPE_QOS_DATA)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_DATA);
+}
+
+/**
+ * ieee80211_is_data_present - check if type is IEEE80211_FTYPE_DATA and has data
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_data_present(__le16 fc)
+{
+	/*
+	 * mask with 0x40 and test that that bit is clear to only return true
+	 * for the data-containing substypes.
+	 */
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | 0x40)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_DATA);
+}
+
+/**
+ * ieee80211_is_assoc_req - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ASSOC_REQ
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_assoc_req(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ASSOC_REQ);
+}
+
+/**
+ * ieee80211_is_assoc_resp - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ASSOC_RESP
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_assoc_resp(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ASSOC_RESP);
+}
+
+/**
+ * ieee80211_is_reassoc_req - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_REASSOC_REQ
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_reassoc_req(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_REASSOC_REQ);
+}
+
+/**
+ * ieee80211_is_reassoc_resp - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_REASSOC_RESP
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_reassoc_resp(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_REASSOC_RESP);
+}
+
+/**
+ * ieee80211_is_probe_req - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_PROBE_REQ
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_probe_req(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_REQ);
+}
+
+/**
+ * ieee80211_is_probe_resp - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_PROBE_RESP
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_probe_resp(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_RESP);
+}
+
+/**
+ * ieee80211_is_beacon - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_BEACON
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_beacon(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON);
+}
+
+/**
+ * ieee80211_is_atim - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ATIM
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_atim(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ATIM);
+}
+
+/**
+ * ieee80211_is_disassoc - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_DISASSOC
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_disassoc(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_DISASSOC);
+}
+
+/**
+ * ieee80211_is_auth - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_AUTH
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_auth(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH);
+}
+
+/**
+ * ieee80211_is_deauth - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_DEAUTH
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_deauth(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_DEAUTH);
+}
+
+/**
+ * ieee80211_is_action - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ACTION
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_action(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ACTION);
+}
+
+/**
+ * ieee80211_is_back_req - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_BACK_REQ
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_back_req(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_BACK_REQ);
+}
+
+/**
+ * ieee80211_is_back - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_BACK
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_back(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_BACK);
+}
+
+/**
+ * ieee80211_is_pspoll - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_PSPOLL
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_pspoll(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL);
+}
+
+/**
+ * ieee80211_is_rts - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_RTS
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_rts(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_RTS);
+}
+
+/**
+ * ieee80211_is_cts - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_CTS
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_cts(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTS);
+}
+
+/**
+ * ieee80211_is_ack - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_ACK
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_ack(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_ACK);
+}
+
+/**
+ * ieee80211_is_cfend - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_CFEND
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_cfend(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CFEND);
+}
+
+/**
+ * ieee80211_is_cfendack - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_CFENDACK
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_cfendack(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CFENDACK);
+}
+
+/**
+ * ieee80211_is_nullfunc - check if frame is a regular (non-QoS) nullfunc frame
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_nullfunc(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC);
+}
+
+/**
+ * ieee80211_is_qos_nullfunc - check if frame is a QoS nullfunc frame
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_qos_nullfunc(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_NULLFUNC);
+}
+
+/**
+ * ieee80211_is_first_frag - check if IEEE80211_SCTL_FRAG is not set
+ * @seq_ctrl: frame sequence control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_first_frag(__le16 seq_ctrl)
+{
+	return (seq_ctrl & cpu_to_le16(IEEE80211_SCTL_FRAG)) == 0;
+}
+
+struct ieee80211s_hdr {
+	u8 flags;
+	u8 ttl;
+	__le32 seqnum;
+	u8 eaddr1[6];
+	u8 eaddr2[6];
+} __attribute__ ((packed));
+
+/* Mesh flags */
+#define MESH_FLAGS_AE_A4 	0x1
+#define MESH_FLAGS_AE_A5_A6	0x2
+#define MESH_FLAGS_AE		0x3
+#define MESH_FLAGS_PS_DEEP	0x4
+
+/**
+ * struct ieee80211_quiet_ie
+ *
+ * This structure refers to "Quiet information element"
+ */
+struct ieee80211_quiet_ie {
+	u8 count;
+	u8 period;
+	__le16 duration;
+	__le16 offset;
+} __attribute__ ((packed));
+
+/**
+ * struct ieee80211_msrment_ie
+ *
+ * This structure refers to "Measurement Request/Report information element"
+ */
+struct ieee80211_msrment_ie {
+	u8 token;
+	u8 mode;
+	u8 type;
+	u8 request[0];
+} __attribute__ ((packed));
+
+/**
+ * struct ieee80211_channel_sw_ie
+ *
+ * This structure refers to "Channel Switch Announcement information element"
+ */
+struct ieee80211_channel_sw_ie {
+	u8 mode;
+	u8 new_ch_num;
+	u8 count;
+} __attribute__ ((packed));
+
+/**
+ * struct ieee80211_tim
+ *
+ * This structure refers to "Traffic Indication Map information element"
+ */
+struct ieee80211_tim_ie {
+	u8 dtim_count;
+	u8 dtim_period;
+	u8 bitmap_ctrl;
+	/* variable size: 1 - 251 bytes */
+	u8 virtual_map[1];
+} __attribute__ ((packed));
+
+/**
+ * struct ieee80211_meshconf_ie
+ *
+ * This structure refers to "Mesh Configuration information element"
+ */
+struct ieee80211_meshconf_ie {
+	u8 meshconf_psel;
+	u8 meshconf_pmetric;
+	u8 meshconf_congest;
+	u8 meshconf_synch;
+	u8 meshconf_auth;
+	u8 meshconf_form;
+	u8 meshconf_cap;
+} __attribute__ ((packed));
+
+/**
+ * struct ieee80211_rann_ie
+ *
+ * This structure refers to "Root Announcement information element"
+ */
+struct ieee80211_rann_ie {
+	u8 rann_flags;
+	u8 rann_hopcount;
+	u8 rann_ttl;
+	u8 rann_addr[6];
+	u32 rann_seq;
+	u32 rann_interval;
+	u32 rann_metric;
+} __attribute__ ((packed));
+
+enum ieee80211_rann_flags {
+	RANN_FLAG_IS_GATE = 1 << 0,
+};
+
+#define WLAN_SA_QUERY_TR_ID_LEN 2
+
+struct ieee80211_mgmt {
+	__le16 frame_control;
+	__le16 duration;
+	u8 da[6];
+	u8 sa[6];
+	u8 bssid[6];
+	__le16 seq_ctrl;
+	union {
+		struct {
+			__le16 auth_alg;
+			__le16 auth_transaction;
+			__le16 status_code;
+			/* possibly followed by Challenge text */
+			u8 variable[0];
+		} __attribute__ ((packed)) auth;
+		struct {
+			__le16 reason_code;
+		} __attribute__ ((packed)) deauth;
+		struct {
+			__le16 capab_info;
+			__le16 listen_interval;
+			/* followed by SSID and Supported rates */
+			u8 variable[0];
+		} __attribute__ ((packed)) assoc_req;
+		struct {
+			__le16 capab_info;
+			__le16 status_code;
+			__le16 aid;
+			/* followed by Supported rates */
+			u8 variable[0];
+		} __attribute__ ((packed)) assoc_resp, reassoc_resp;
+		struct {
+			__le16 capab_info;
+			__le16 listen_interval;
+			u8 current_ap[6];
+			/* followed by SSID and Supported rates */
+			u8 variable[0];
+		} __attribute__ ((packed)) reassoc_req;
+		struct {
+			__le16 reason_code;
+		} __attribute__ ((packed)) disassoc;
+		struct {
+			__le64 timestamp;
+			__le16 beacon_int;
+			__le16 capab_info;
+			/* followed by some of SSID, Supported rates,
+			 * FH Params, DS Params, CF Params, IBSS Params, TIM */
+			u8 variable[0];
+		} __attribute__ ((packed)) beacon;
+		struct {
+			/* only variable items: SSID, Supported rates */
+			u8 variable[0];
+		} __attribute__ ((packed)) probe_req;
+		struct {
+			__le64 timestamp;
+			__le16 beacon_int;
+			__le16 capab_info;
+			/* followed by some of SSID, Supported rates,
+			 * FH Params, DS Params, CF Params, IBSS Params */
+			u8 variable[0];
+		} __attribute__ ((packed)) probe_resp;
+		struct {
+			u8 category;
+			union {
+				struct {
+					u8 action_code;
+					u8 dialog_token;
+					u8 status_code;
+					u8 variable[0];
+				} __attribute__ ((packed)) wme_action;
+				struct{
+					u8 action_code;
+					u8 element_id;
+					u8 length;
+					struct ieee80211_channel_sw_ie sw_elem;
+				} __attribute__((packed)) chan_switch;
+				struct{
+					u8 action_code;
+					u8 dialog_token;
+					u8 element_id;
+					u8 length;
+					struct ieee80211_msrment_ie msr_elem;
+				} __attribute__((packed)) measurement;
+				struct{
+					u8 action_code;
+					u8 dialog_token;
+					__le16 capab;
+					__le16 timeout;
+					__le16 start_seq_num;
+				} __attribute__((packed)) addba_req;
+				struct{
+					u8 action_code;
+					u8 dialog_token;
+					__le16 status;
+					__le16 capab;
+					__le16 timeout;
+				} __attribute__((packed)) addba_resp;
+				struct{
+					u8 action_code;
+					__le16 params;
+					__le16 reason_code;
+				} __attribute__((packed)) delba;
+				struct {
+					u8 action_code;
+					u8 variable[0];
+				} __attribute__((packed)) self_prot;
+				struct{
+					u8 action_code;
+					u8 variable[0];
+				} __attribute__((packed)) mesh_action;
+				struct {
+					u8 action;
+					u8 trans_id[WLAN_SA_QUERY_TR_ID_LEN];
+				} __attribute__ ((packed)) sa_query;
+				struct {
+					u8 action;
+					u8 smps_control;
+				} __attribute__ ((packed)) ht_smps;
+				struct {
+					u8 action_code;
+					u8 dialog_token;
+					__le16 capability;
+					u8 variable[0];
+				} __packed tdls_discover_resp;
+			} u;
+		} __attribute__ ((packed)) action;
+	} u;
+} __attribute__ ((packed));
+
+/* Supported Rates value encodings in 802.11n-2009 7.3.2.2 */
+#define BSS_MEMBERSHIP_SELECTOR_HT_PHY	127
+
+/* mgmt header + 1 byte category code */
+#define IEEE80211_MIN_ACTION_SIZE offsetof(struct ieee80211_mgmt, u.action.u)
+
+
+/* Management MIC information element (IEEE 802.11w) */
+struct ieee80211_mmie {
+	u8 element_id;
+	u8 length;
+	__le16 key_id;
+	u8 sequence_number[6];
+	u8 mic[8];
+} __attribute__ ((packed));
+
+struct ieee80211_vendor_ie {
+	u8 element_id;
+	u8 len;
+	u8 oui[3];
+	u8 oui_type;
+} __packed;
+
+/* Control frames */
+struct ieee80211_rts {
+	__le16 frame_control;
+	__le16 duration;
+	u8 ra[6];
+	u8 ta[6];
+} __attribute__ ((packed));
+
+struct ieee80211_cts {
+	__le16 frame_control;
+	__le16 duration;
+	u8 ra[6];
+} __attribute__ ((packed));
+
+struct ieee80211_pspoll {
+	__le16 frame_control;
+	__le16 aid;
+	u8 bssid[6];
+	u8 ta[6];
+} __attribute__ ((packed));
+
+/* TDLS */
+
+/* Link-id information element */
+struct ieee80211_tdls_lnkie {
+	u8 ie_type; /* Link Identifier IE */
+	u8 ie_len;
+	u8 bssid[6];
+	u8 init_sta[6];
+	u8 resp_sta[6];
+} __packed;
+
+struct ieee80211_tdls_data {
+	u8 da[6];
+	u8 sa[6];
+	__be16 ether_type;
+	u8 payload_type;
+	u8 category;
+	u8 action_code;
+	union {
+		struct {
+			u8 dialog_token;
+			__le16 capability;
+			u8 variable[0];
+		} __packed setup_req;
+		struct {
+			__le16 status_code;
+			u8 dialog_token;
+			__le16 capability;
+			u8 variable[0];
+		} __packed setup_resp;
+		struct {
+			__le16 status_code;
+			u8 dialog_token;
+			u8 variable[0];
+		} __packed setup_cfm;
+		struct {
+			__le16 reason_code;
+			u8 variable[0];
+		} __packed teardown;
+		struct {
+			u8 dialog_token;
+			u8 variable[0];
+		} __packed discover_req;
+	} u;
+} __packed;
+
+/**
+ * struct ieee80211_bar - HT Block Ack Request
+ *
+ * This structure refers to "HT BlockAckReq" as
+ * described in 802.11n draft section 7.2.1.7.1
+ */
+struct ieee80211_bar {
+	__le16 frame_control;
+	__le16 duration;
+	__u8 ra[6];
+	__u8 ta[6];
+	__le16 control;
+	__le16 start_seq_num;
+} __attribute__((packed));
+
+/* 802.11 BAR control masks */
+#define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL	0x0000
+#define IEEE80211_BAR_CTRL_MULTI_TID		0x0002
+#define IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA	0x0004
+#define IEEE80211_BAR_CTRL_TID_INFO_MASK	0xf000
+#define IEEE80211_BAR_CTRL_TID_INFO_SHIFT	12
+
+#define IEEE80211_HT_MCS_MASK_LEN		10
+
+/**
+ * struct ieee80211_mcs_info - MCS information
+ * @rx_mask: RX mask
+ * @rx_highest: highest supported RX rate. If set represents
+ *	the highest supported RX data rate in units of 1 Mbps.
+ *	If this field is 0 this value should not be used to
+ *	consider the highest RX data rate supported.
+ * @tx_params: TX parameters
+ */
+struct ieee80211_mcs_info {
+	u8 rx_mask[IEEE80211_HT_MCS_MASK_LEN];
+	__le16 rx_highest;
+	u8 tx_params;
+	u8 reserved[3];
+} __attribute__((packed));
+
+/* 802.11n HT capability MSC set */
+#define IEEE80211_HT_MCS_RX_HIGHEST_MASK	0x3ff
+#define IEEE80211_HT_MCS_TX_DEFINED		0x01
+#define IEEE80211_HT_MCS_TX_RX_DIFF		0x02
+/* value 0 == 1 stream etc */
+#define IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK	0x0C
+#define IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT	2
+#define		IEEE80211_HT_MCS_TX_MAX_STREAMS	4
+#define IEEE80211_HT_MCS_TX_UNEQUAL_MODULATION	0x10
+
+/*
+ * 802.11n D5.0 20.3.5 / 20.6 says:
+ * - indices 0 to 7 and 32 are single spatial stream
+ * - 8 to 31 are multiple spatial streams using equal modulation
+ *   [8..15 for two streams, 16..23 for three and 24..31 for four]
+ * - remainder are multiple spatial streams using unequal modulation
+ */
+#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START 33
+#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START_BYTE \
+	(IEEE80211_HT_MCS_UNEQUAL_MODULATION_START / 8)
+
+/**
+ * struct ieee80211_ht_cap - HT capabilities
+ *
+ * This structure is the "HT capabilities element" as
+ * described in 802.11n D5.0 7.3.2.57
+ */
+struct ieee80211_ht_cap {
+	__le16 cap_info;
+	u8 ampdu_params_info;
+
+	/* 16 bytes MCS information */
+	struct ieee80211_mcs_info mcs;
+
+	__le16 extended_ht_cap_info;
+	__le32 tx_BF_cap_info;
+	u8 antenna_selection_info;
+} __attribute__ ((packed));
+
+/* 802.11n HT capabilities masks (for cap_info) */
+#define IEEE80211_HT_CAP_LDPC_CODING		0x0001
+#define IEEE80211_HT_CAP_SUP_WIDTH_20_40	0x0002
+#define IEEE80211_HT_CAP_SM_PS			0x000C
+#define		IEEE80211_HT_CAP_SM_PS_SHIFT	2
+#define IEEE80211_HT_CAP_GRN_FLD		0x0010
+#define IEEE80211_HT_CAP_SGI_20			0x0020
+#define IEEE80211_HT_CAP_SGI_40			0x0040
+#define IEEE80211_HT_CAP_TX_STBC		0x0080
+#define IEEE80211_HT_CAP_RX_STBC		0x0300
+#define		IEEE80211_HT_CAP_RX_STBC_SHIFT	8
+#define IEEE80211_HT_CAP_DELAY_BA		0x0400
+#define IEEE80211_HT_CAP_MAX_AMSDU		0x0800
+#define IEEE80211_HT_CAP_DSSSCCK40		0x1000
+#define IEEE80211_HT_CAP_RESERVED		0x2000
+#define IEEE80211_HT_CAP_40MHZ_INTOLERANT	0x4000
+#define IEEE80211_HT_CAP_LSIG_TXOP_PROT		0x8000
+
+/* 802.11n HT extended capabilities masks (for extended_ht_cap_info) */
+#define IEEE80211_HT_EXT_CAP_PCO		0x0001
+#define IEEE80211_HT_EXT_CAP_PCO_TIME		0x0006
+#define		IEEE80211_HT_EXT_CAP_PCO_TIME_SHIFT	1
+#define IEEE80211_HT_EXT_CAP_MCS_FB		0x0300
+#define		IEEE80211_HT_EXT_CAP_MCS_FB_SHIFT	8
+#define IEEE80211_HT_EXT_CAP_HTC_SUP		0x0400
+#define IEEE80211_HT_EXT_CAP_RD_RESPONDER	0x0800
+
+/* 802.11n HT capability AMPDU settings (for ampdu_params_info) */
+#define IEEE80211_HT_AMPDU_PARM_FACTOR		0x03
+#define IEEE80211_HT_AMPDU_PARM_DENSITY		0x1C
+#define		IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT	2
+
+/*
+ * Maximum length of AMPDU that the STA can receive.
+ * Length = 2 ^ (13 + max_ampdu_length_exp) - 1 (octets)
+ */
+enum ieee80211_max_ampdu_length_exp {
+	IEEE80211_HT_MAX_AMPDU_8K = 0,
+	IEEE80211_HT_MAX_AMPDU_16K = 1,
+	IEEE80211_HT_MAX_AMPDU_32K = 2,
+	IEEE80211_HT_MAX_AMPDU_64K = 3
+};
+
+#define IEEE80211_HT_MAX_AMPDU_FACTOR 13
+
+/* Minimum MPDU start spacing */
+enum ieee80211_min_mpdu_spacing {
+	IEEE80211_HT_MPDU_DENSITY_NONE = 0,	/* No restriction */
+	IEEE80211_HT_MPDU_DENSITY_0_25 = 1,	/* 1/4 usec */
+	IEEE80211_HT_MPDU_DENSITY_0_5 = 2,	/* 1/2 usec */
+	IEEE80211_HT_MPDU_DENSITY_1 = 3,	/* 1 usec */
+	IEEE80211_HT_MPDU_DENSITY_2 = 4,	/* 2 usec */
+	IEEE80211_HT_MPDU_DENSITY_4 = 5,	/* 4 usec */
+	IEEE80211_HT_MPDU_DENSITY_8 = 6,	/* 8 usec */
+	IEEE80211_HT_MPDU_DENSITY_16 = 7	/* 16 usec */
+};
+
+/**
+ * struct ieee80211_ht_info - HT information
+ *
+ * This structure is the "HT information element" as
+ * described in 802.11n D5.0 7.3.2.58
+ */
+struct ieee80211_ht_info {
+	u8 control_chan;
+	u8 ht_param;
+	__le16 operation_mode;
+	__le16 stbc_param;
+	u8 basic_set[16];
+} __attribute__ ((packed));
+
+/* for ht_param */
+#define IEEE80211_HT_PARAM_CHA_SEC_OFFSET		0x03
+#define		IEEE80211_HT_PARAM_CHA_SEC_NONE		0x00
+#define		IEEE80211_HT_PARAM_CHA_SEC_ABOVE	0x01
+#define		IEEE80211_HT_PARAM_CHA_SEC_BELOW	0x03
+#define IEEE80211_HT_PARAM_CHAN_WIDTH_ANY		0x04
+#define IEEE80211_HT_PARAM_RIFS_MODE			0x08
+#define IEEE80211_HT_PARAM_SPSMP_SUPPORT		0x10
+#define IEEE80211_HT_PARAM_SERV_INTERVAL_GRAN		0xE0
+
+/* for operation_mode */
+#define IEEE80211_HT_OP_MODE_PROTECTION			0x0003
+#define		IEEE80211_HT_OP_MODE_PROTECTION_NONE		0
+#define		IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER	1
+#define		IEEE80211_HT_OP_MODE_PROTECTION_20MHZ		2
+#define		IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED	3
+#define IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT		0x0004
+#define IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT		0x0010
+
+/* for stbc_param */
+#define IEEE80211_HT_STBC_PARAM_DUAL_BEACON		0x0040
+#define IEEE80211_HT_STBC_PARAM_DUAL_CTS_PROT		0x0080
+#define IEEE80211_HT_STBC_PARAM_STBC_BEACON		0x0100
+#define IEEE80211_HT_STBC_PARAM_LSIG_TXOP_FULLPROT	0x0200
+#define IEEE80211_HT_STBC_PARAM_PCO_ACTIVE		0x0400
+#define IEEE80211_HT_STBC_PARAM_PCO_PHASE		0x0800
+
+
+/* block-ack parameters */
+#define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002
+#define IEEE80211_ADDBA_PARAM_TID_MASK 0x003C
+#define IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK 0xFFC0
+#define IEEE80211_DELBA_PARAM_TID_MASK 0xF000
+#define IEEE80211_DELBA_PARAM_INITIATOR_MASK 0x0800
+
+/*
+ * A-PMDU buffer sizes
+ * According to IEEE802.11n spec size varies from 8K to 64K (in powers of 2)
+ */
+#define IEEE80211_MIN_AMPDU_BUF 0x8
+#define IEEE80211_MAX_AMPDU_BUF 0x40
+
+
+/* Spatial Multiplexing Power Save Modes (for capability) */
+#define WLAN_HT_CAP_SM_PS_STATIC	0
+#define WLAN_HT_CAP_SM_PS_DYNAMIC	1
+#define WLAN_HT_CAP_SM_PS_INVALID	2
+#define WLAN_HT_CAP_SM_PS_DISABLED	3
+
+/* for SM power control field lower two bits */
+#define WLAN_HT_SMPS_CONTROL_DISABLED	0
+#define WLAN_HT_SMPS_CONTROL_STATIC	1
+#define WLAN_HT_SMPS_CONTROL_DYNAMIC	3
+
+/* Authentication algorithms */
+#define WLAN_AUTH_OPEN 0
+#define WLAN_AUTH_SHARED_KEY 1
+#define WLAN_AUTH_FT 2
+#define WLAN_AUTH_SAE 3
+#define WLAN_AUTH_LEAP 128
+
+#define WLAN_AUTH_CHALLENGE_LEN 128
+
+#define WLAN_CAPABILITY_ESS		(1<<0)
+#define WLAN_CAPABILITY_IBSS		(1<<1)
+
+/*
+ * A mesh STA sets the ESS and IBSS capability bits to zero.
+ * however, this holds true for p2p probe responses (in the p2p_find
+ * phase) as well.
+ */
+#define WLAN_CAPABILITY_IS_STA_BSS(cap)	\
+	(!((cap) & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)))
+
+#define WLAN_CAPABILITY_CF_POLLABLE	(1<<2)
+#define WLAN_CAPABILITY_CF_POLL_REQUEST	(1<<3)
+#define WLAN_CAPABILITY_PRIVACY		(1<<4)
+#define WLAN_CAPABILITY_SHORT_PREAMBLE	(1<<5)
+#define WLAN_CAPABILITY_PBCC		(1<<6)
+#define WLAN_CAPABILITY_CHANNEL_AGILITY	(1<<7)
+
+/* 802.11h */
+#define WLAN_CAPABILITY_SPECTRUM_MGMT	(1<<8)
+#define WLAN_CAPABILITY_QOS		(1<<9)
+#define WLAN_CAPABILITY_SHORT_SLOT_TIME	(1<<10)
+#define WLAN_CAPABILITY_DSSS_OFDM	(1<<13)
+/* measurement */
+#define IEEE80211_SPCT_MSR_RPRT_MODE_LATE	(1<<0)
+#define IEEE80211_SPCT_MSR_RPRT_MODE_INCAPABLE	(1<<1)
+#define IEEE80211_SPCT_MSR_RPRT_MODE_REFUSED	(1<<2)
+
+#define IEEE80211_SPCT_MSR_RPRT_TYPE_BASIC	0
+#define IEEE80211_SPCT_MSR_RPRT_TYPE_CCA	1
+#define IEEE80211_SPCT_MSR_RPRT_TYPE_RPI	2
+
+
+/* 802.11g ERP information element */
+#define WLAN_ERP_NON_ERP_PRESENT (1<<0)
+#define WLAN_ERP_USE_PROTECTION (1<<1)
+#define WLAN_ERP_BARKER_PREAMBLE (1<<2)
+
+/* WLAN_ERP_BARKER_PREAMBLE values */
+enum {
+	WLAN_ERP_PREAMBLE_SHORT = 0,
+	WLAN_ERP_PREAMBLE_LONG = 1,
+};
+
+/* Status codes */
+enum ieee80211_statuscode {
+	WLAN_STATUS_SUCCESS = 0,
+	WLAN_STATUS_UNSPECIFIED_FAILURE = 1,
+	WLAN_STATUS_CAPS_UNSUPPORTED = 10,
+	WLAN_STATUS_REASSOC_NO_ASSOC = 11,
+	WLAN_STATUS_ASSOC_DENIED_UNSPEC = 12,
+	WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG = 13,
+	WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION = 14,
+	WLAN_STATUS_CHALLENGE_FAIL = 15,
+	WLAN_STATUS_AUTH_TIMEOUT = 16,
+	WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA = 17,
+	WLAN_STATUS_ASSOC_DENIED_RATES = 18,
+	/* 802.11b */
+	WLAN_STATUS_ASSOC_DENIED_NOSHORTPREAMBLE = 19,
+	WLAN_STATUS_ASSOC_DENIED_NOPBCC = 20,
+	WLAN_STATUS_ASSOC_DENIED_NOAGILITY = 21,
+	/* 802.11h */
+	WLAN_STATUS_ASSOC_DENIED_NOSPECTRUM = 22,
+	WLAN_STATUS_ASSOC_REJECTED_BAD_POWER = 23,
+	WLAN_STATUS_ASSOC_REJECTED_BAD_SUPP_CHAN = 24,
+	/* 802.11g */
+	WLAN_STATUS_ASSOC_DENIED_NOSHORTTIME = 25,
+	WLAN_STATUS_ASSOC_DENIED_NODSSSOFDM = 26,
+	/* 802.11w */
+	WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY = 30,
+	WLAN_STATUS_ROBUST_MGMT_FRAME_POLICY_VIOLATION = 31,
+	/* 802.11i */
+	WLAN_STATUS_INVALID_IE = 40,
+	WLAN_STATUS_INVALID_GROUP_CIPHER = 41,
+	WLAN_STATUS_INVALID_PAIRWISE_CIPHER = 42,
+	WLAN_STATUS_INVALID_AKMP = 43,
+	WLAN_STATUS_UNSUPP_RSN_VERSION = 44,
+	WLAN_STATUS_INVALID_RSN_IE_CAP = 45,
+	WLAN_STATUS_CIPHER_SUITE_REJECTED = 46,
+	/* 802.11e */
+	WLAN_STATUS_UNSPECIFIED_QOS = 32,
+	WLAN_STATUS_ASSOC_DENIED_NOBANDWIDTH = 33,
+	WLAN_STATUS_ASSOC_DENIED_LOWACK = 34,
+	WLAN_STATUS_ASSOC_DENIED_UNSUPP_QOS = 35,
+	WLAN_STATUS_REQUEST_DECLINED = 37,
+	WLAN_STATUS_INVALID_QOS_PARAM = 38,
+	WLAN_STATUS_CHANGE_TSPEC = 39,
+	WLAN_STATUS_WAIT_TS_DELAY = 47,
+	WLAN_STATUS_NO_DIRECT_LINK = 48,
+	WLAN_STATUS_STA_NOT_PRESENT = 49,
+	WLAN_STATUS_STA_NOT_QSTA = 50,
+	/* 802.11s */
+	WLAN_STATUS_ANTI_CLOG_REQUIRED = 76,
+	WLAN_STATUS_FCG_NOT_SUPP = 78,
+	WLAN_STATUS_STA_NO_TBTT = 78,
+};
+
+
+/* Reason codes */
+enum ieee80211_reasoncode {
+	WLAN_REASON_UNSPECIFIED = 1,
+	WLAN_REASON_PREV_AUTH_NOT_VALID = 2,
+	WLAN_REASON_DEAUTH_LEAVING = 3,
+	WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY = 4,
+	WLAN_REASON_DISASSOC_AP_BUSY = 5,
+	WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA = 6,
+	WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA = 7,
+	WLAN_REASON_DISASSOC_STA_HAS_LEFT = 8,
+	WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH = 9,
+	/* 802.11h */
+	WLAN_REASON_DISASSOC_BAD_POWER = 10,
+	WLAN_REASON_DISASSOC_BAD_SUPP_CHAN = 11,
+	/* 802.11i */
+	WLAN_REASON_INVALID_IE = 13,
+	WLAN_REASON_MIC_FAILURE = 14,
+	WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT = 15,
+	WLAN_REASON_GROUP_KEY_HANDSHAKE_TIMEOUT = 16,
+	WLAN_REASON_IE_DIFFERENT = 17,
+	WLAN_REASON_INVALID_GROUP_CIPHER = 18,
+	WLAN_REASON_INVALID_PAIRWISE_CIPHER = 19,
+	WLAN_REASON_INVALID_AKMP = 20,
+	WLAN_REASON_UNSUPP_RSN_VERSION = 21,
+	WLAN_REASON_INVALID_RSN_IE_CAP = 22,
+	WLAN_REASON_IEEE8021X_FAILED = 23,
+	WLAN_REASON_CIPHER_SUITE_REJECTED = 24,
+	/* 802.11e */
+	WLAN_REASON_DISASSOC_UNSPECIFIED_QOS = 32,
+	WLAN_REASON_DISASSOC_QAP_NO_BANDWIDTH = 33,
+	WLAN_REASON_DISASSOC_LOW_ACK = 34,
+	WLAN_REASON_DISASSOC_QAP_EXCEED_TXOP = 35,
+	WLAN_REASON_QSTA_LEAVE_QBSS = 36,
+	WLAN_REASON_QSTA_NOT_USE = 37,
+	WLAN_REASON_QSTA_REQUIRE_SETUP = 38,
+	WLAN_REASON_QSTA_TIMEOUT = 39,
+	WLAN_REASON_QSTA_CIPHER_NOT_SUPP = 45,
+	/* 802.11s */
+	WLAN_REASON_MESH_PEER_CANCELED = 52,
+	WLAN_REASON_MESH_MAX_PEERS = 53,
+	WLAN_REASON_MESH_CONFIG = 54,
+	WLAN_REASON_MESH_CLOSE = 55,
+	WLAN_REASON_MESH_MAX_RETRIES = 56,
+	WLAN_REASON_MESH_CONFIRM_TIMEOUT = 57,
+	WLAN_REASON_MESH_INVALID_GTK = 58,
+	WLAN_REASON_MESH_INCONSISTENT_PARAM = 59,
+	WLAN_REASON_MESH_INVALID_SECURITY = 60,
+	WLAN_REASON_MESH_PATH_ERROR = 61,
+	WLAN_REASON_MESH_PATH_NOFORWARD = 62,
+	WLAN_REASON_MESH_PATH_DEST_UNREACHABLE = 63,
+	WLAN_REASON_MAC_EXISTS_IN_MBSS = 64,
+	WLAN_REASON_MESH_CHAN_REGULATORY = 65,
+	WLAN_REASON_MESH_CHAN = 66,
+};
+
+
+/* Information Element IDs */
+enum ieee80211_eid {
+	WLAN_EID_SSID = 0,
+	WLAN_EID_SUPP_RATES = 1,
+	WLAN_EID_FH_PARAMS = 2,
+	WLAN_EID_DS_PARAMS = 3,
+	WLAN_EID_CF_PARAMS = 4,
+	WLAN_EID_TIM = 5,
+	WLAN_EID_IBSS_PARAMS = 6,
+	WLAN_EID_CHALLENGE = 16,
+
+	WLAN_EID_COUNTRY = 7,
+	WLAN_EID_HP_PARAMS = 8,
+	WLAN_EID_HP_TABLE = 9,
+	WLAN_EID_REQUEST = 10,
+
+	WLAN_EID_QBSS_LOAD = 11,
+	WLAN_EID_EDCA_PARAM_SET = 12,
+	WLAN_EID_TSPEC = 13,
+	WLAN_EID_TCLAS = 14,
+	WLAN_EID_SCHEDULE = 15,
+	WLAN_EID_TS_DELAY = 43,
+	WLAN_EID_TCLAS_PROCESSING = 44,
+	WLAN_EID_QOS_CAPA = 46,
+	/* 802.11z */
+	WLAN_EID_LINK_ID = 101,
+	/* 802.11s */
+	WLAN_EID_MESH_CONFIG = 113,
+	WLAN_EID_MESH_ID = 114,
+	WLAN_EID_LINK_METRIC_REPORT = 115,
+	WLAN_EID_CONGESTION_NOTIFICATION = 116,
+	WLAN_EID_PEER_MGMT = 117,
+	WLAN_EID_CHAN_SWITCH_PARAM = 118,
+	WLAN_EID_MESH_AWAKE_WINDOW = 119,
+	WLAN_EID_BEACON_TIMING = 120,
+	WLAN_EID_MCCAOP_SETUP_REQ = 121,
+	WLAN_EID_MCCAOP_SETUP_RESP = 122,
+	WLAN_EID_MCCAOP_ADVERT = 123,
+	WLAN_EID_MCCAOP_TEARDOWN = 124,
+	WLAN_EID_GANN = 125,
+	WLAN_EID_RANN = 126,
+	WLAN_EID_PREQ = 130,
+	WLAN_EID_PREP = 131,
+	WLAN_EID_PERR = 132,
+	WLAN_EID_PXU = 137,
+	WLAN_EID_PXUC = 138,
+	WLAN_EID_AUTH_MESH_PEER_EXCH = 139,
+	WLAN_EID_MIC = 140,
+
+	WLAN_EID_PWR_CONSTRAINT = 32,
+	WLAN_EID_PWR_CAPABILITY = 33,
+	WLAN_EID_TPC_REQUEST = 34,
+	WLAN_EID_TPC_REPORT = 35,
+	WLAN_EID_SUPPORTED_CHANNELS = 36,
+	WLAN_EID_CHANNEL_SWITCH = 37,
+	WLAN_EID_MEASURE_REQUEST = 38,
+	WLAN_EID_MEASURE_REPORT = 39,
+	WLAN_EID_QUIET = 40,
+	WLAN_EID_IBSS_DFS = 41,
+
+	WLAN_EID_ERP_INFO = 42,
+	WLAN_EID_EXT_SUPP_RATES = 50,
+
+	WLAN_EID_HT_CAPABILITY = 45,
+	WLAN_EID_HT_INFORMATION = 61,
+
+	WLAN_EID_RSN = 48,
+	WLAN_EID_MMIE = 76,
+	WLAN_EID_WPA = 221,
+	WLAN_EID_GENERIC = 221,
+	WLAN_EID_VENDOR_SPECIFIC = 221,
+	WLAN_EID_QOS_PARAMETER = 222,
+
+	WLAN_EID_AP_CHAN_REPORT = 51,
+	WLAN_EID_NEIGHBOR_REPORT = 52,
+	WLAN_EID_RCPI = 53,
+	WLAN_EID_BSS_AVG_ACCESS_DELAY = 63,
+	WLAN_EID_ANTENNA_INFO = 64,
+	WLAN_EID_RSNI = 65,
+	WLAN_EID_MEASUREMENT_PILOT_TX_INFO = 66,
+	WLAN_EID_BSS_AVAILABLE_CAPACITY = 67,
+	WLAN_EID_BSS_AC_ACCESS_DELAY = 68,
+	WLAN_EID_RRM_ENABLED_CAPABILITIES = 70,
+	WLAN_EID_MULTIPLE_BSSID = 71,
+	WLAN_EID_BSS_COEX_2040 = 72,
+	WLAN_EID_OVERLAP_BSS_SCAN_PARAM = 74,
+	WLAN_EID_EXT_CAPABILITY = 127,
+
+	WLAN_EID_MOBILITY_DOMAIN = 54,
+	WLAN_EID_FAST_BSS_TRANSITION = 55,
+	WLAN_EID_TIMEOUT_INTERVAL = 56,
+	WLAN_EID_RIC_DATA = 57,
+	WLAN_EID_RIC_DESCRIPTOR = 75,
+
+	WLAN_EID_DSE_REGISTERED_LOCATION = 58,
+	WLAN_EID_SUPPORTED_REGULATORY_CLASSES = 59,
+	WLAN_EID_EXT_CHANSWITCH_ANN = 60,
+};
+
+/* Action category code */
+enum ieee80211_category {
+	WLAN_CATEGORY_SPECTRUM_MGMT = 0,
+	WLAN_CATEGORY_QOS = 1,
+	WLAN_CATEGORY_DLS = 2,
+	WLAN_CATEGORY_BACK = 3,
+	WLAN_CATEGORY_PUBLIC = 4,
+	WLAN_CATEGORY_HT = 7,
+	WLAN_CATEGORY_SA_QUERY = 8,
+	WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION = 9,
+	WLAN_CATEGORY_TDLS = 12,
+	WLAN_CATEGORY_MESH_ACTION = 13,
+	WLAN_CATEGORY_MULTIHOP_ACTION = 14,
+	WLAN_CATEGORY_SELF_PROTECTED = 15,
+	WLAN_CATEGORY_WMM = 17,
+	WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126,
+	WLAN_CATEGORY_VENDOR_SPECIFIC = 127,
+};
+
+/* SPECTRUM_MGMT action code */
+enum ieee80211_spectrum_mgmt_actioncode {
+	WLAN_ACTION_SPCT_MSR_REQ = 0,
+	WLAN_ACTION_SPCT_MSR_RPRT = 1,
+	WLAN_ACTION_SPCT_TPC_REQ = 2,
+	WLAN_ACTION_SPCT_TPC_RPRT = 3,
+	WLAN_ACTION_SPCT_CHL_SWITCH = 4,
+};
+
+/* HT action codes */
+enum ieee80211_ht_actioncode {
+	WLAN_HT_ACTION_NOTIFY_CHANWIDTH = 0,
+	WLAN_HT_ACTION_SMPS = 1,
+	WLAN_HT_ACTION_PSMP = 2,
+	WLAN_HT_ACTION_PCO_PHASE = 3,
+	WLAN_HT_ACTION_CSI = 4,
+	WLAN_HT_ACTION_NONCOMPRESSED_BF = 5,
+	WLAN_HT_ACTION_COMPRESSED_BF = 6,
+	WLAN_HT_ACTION_ASEL_IDX_FEEDBACK = 7,
+};
+
+/* Self Protected Action codes */
+enum ieee80211_self_protected_actioncode {
+	WLAN_SP_RESERVED = 0,
+	WLAN_SP_MESH_PEERING_OPEN = 1,
+	WLAN_SP_MESH_PEERING_CONFIRM = 2,
+	WLAN_SP_MESH_PEERING_CLOSE = 3,
+	WLAN_SP_MGK_INFORM = 4,
+	WLAN_SP_MGK_ACK = 5,
+};
+
+/* Mesh action codes */
+enum ieee80211_mesh_actioncode {
+	WLAN_MESH_ACTION_LINK_METRIC_REPORT,
+	WLAN_MESH_ACTION_HWMP_PATH_SELECTION,
+	WLAN_MESH_ACTION_GATE_ANNOUNCEMENT,
+	WLAN_MESH_ACTION_CONGESTION_CONTROL_NOTIFICATION,
+	WLAN_MESH_ACTION_MCCA_SETUP_REQUEST,
+	WLAN_MESH_ACTION_MCCA_SETUP_REPLY,
+	WLAN_MESH_ACTION_MCCA_ADVERTISEMENT_REQUEST,
+	WLAN_MESH_ACTION_MCCA_ADVERTISEMENT,
+	WLAN_MESH_ACTION_MCCA_TEARDOWN,
+	WLAN_MESH_ACTION_TBTT_ADJUSTMENT_REQUEST,
+	WLAN_MESH_ACTION_TBTT_ADJUSTMENT_RESPONSE,
+};
+
+/* Security key length */
+enum ieee80211_key_len {
+	WLAN_KEY_LEN_WEP40 = 5,
+	WLAN_KEY_LEN_WEP104 = 13,
+	WLAN_KEY_LEN_CCMP = 16,
+	WLAN_KEY_LEN_TKIP = 32,
+	WLAN_KEY_LEN_AES_CMAC = 16,
+};
+
+/* Public action codes */
+enum ieee80211_pub_actioncode {
+	WLAN_PUB_ACTION_TDLS_DISCOVER_RES = 14,
+};
+
+/* TDLS action codes */
+enum ieee80211_tdls_actioncode {
+	WLAN_TDLS_SETUP_REQUEST = 0,
+	WLAN_TDLS_SETUP_RESPONSE = 1,
+	WLAN_TDLS_SETUP_CONFIRM = 2,
+	WLAN_TDLS_TEARDOWN = 3,
+	WLAN_TDLS_PEER_TRAFFIC_INDICATION = 4,
+	WLAN_TDLS_CHANNEL_SWITCH_REQUEST = 5,
+	WLAN_TDLS_CHANNEL_SWITCH_RESPONSE = 6,
+	WLAN_TDLS_PEER_PSM_REQUEST = 7,
+	WLAN_TDLS_PEER_PSM_RESPONSE = 8,
+	WLAN_TDLS_PEER_TRAFFIC_RESPONSE = 9,
+	WLAN_TDLS_DISCOVERY_REQUEST = 10,
+};
+
+/*
+ * TDLS capabililites to be enabled in the 5th byte of the
+ * @WLAN_EID_EXT_CAPABILITY information element
+ */
+#define WLAN_EXT_CAPA5_TDLS_ENABLED	BIT(5)
+#define WLAN_EXT_CAPA5_TDLS_PROHIBITED	BIT(6)
+
+/* TDLS specific payload type in the LLC/SNAP header */
+#define WLAN_TDLS_SNAP_RFTYPE	0x2
+
+/**
+ * enum - mesh path selection protocol identifier
+ *
+ * @IEEE80211_PATH_PROTOCOL_HWMP: the default path selection protocol
+ * @IEEE80211_PATH_PROTOCOL_VENDOR: a vendor specific protocol that will
+ * be specified in a vendor specific information element
+ */
+enum {
+	IEEE80211_PATH_PROTOCOL_HWMP = 0,
+	IEEE80211_PATH_PROTOCOL_VENDOR = 255,
+};
+
+/**
+ * enum - mesh path selection metric identifier
+ *
+ * @IEEE80211_PATH_METRIC_AIRTIME: the default path selection metric
+ * @IEEE80211_PATH_METRIC_VENDOR: a vendor specific metric that will be
+ * specified in a vendor specific information element
+ */
+enum {
+	IEEE80211_PATH_METRIC_AIRTIME = 0,
+	IEEE80211_PATH_METRIC_VENDOR = 255,
+};
+
+
+/*
+ * IEEE 802.11-2007 7.3.2.9 Country information element
+ *
+ * Minimum length is 8 octets, ie len must be evenly
+ * divisible by 2
+ */
+
+/* Although the spec says 8 I'm seeing 6 in practice */
+#define IEEE80211_COUNTRY_IE_MIN_LEN	6
+
+/* The Country String field of the element shall be 3 octets in length */
+#define IEEE80211_COUNTRY_STRING_LEN	3
+
+/*
+ * For regulatory extension stuff see IEEE 802.11-2007
+ * Annex I (page 1141) and Annex J (page 1147). Also
+ * review 7.3.2.9.
+ *
+ * When dot11RegulatoryClassesRequired is true and the
+ * first_channel/reg_extension_id is >= 201 then the IE
+ * compromises of the 'ext' struct represented below:
+ *
+ *  - Regulatory extension ID - when generating IE this just needs
+ *    to be monotonically increasing for each triplet passed in
+ *    the IE
+ *  - Regulatory class - index into set of rules
+ *  - Coverage class - index into air propagation time (Table 7-27),
+ *    in microseconds, you can compute the air propagation time from
+ *    the index by multiplying by 3, so index 10 yields a propagation
+ *    of 10 us. Valid values are 0-31, values 32-255 are not defined
+ *    yet. A value of 0 inicates air propagation of <= 1 us.
+ *
+ *  See also Table I.2 for Emission limit sets and table
+ *  I.3 for Behavior limit sets. Table J.1 indicates how to map
+ *  a reg_class to an emission limit set and behavior limit set.
+ */
+#define IEEE80211_COUNTRY_EXTENSION_ID 201
+
+/*
+ *  Channels numbers in the IE must be monotonically increasing
+ *  if dot11RegulatoryClassesRequired is not true.
+ *
+ *  If dot11RegulatoryClassesRequired is true consecutive
+ *  subband triplets following a regulatory triplet shall
+ *  have monotonically increasing first_channel number fields.
+ *
+ *  Channel numbers shall not overlap.
+ *
+ *  Note that max_power is signed.
+ */
+struct ieee80211_country_ie_triplet {
+	union {
+		struct {
+			u8 first_channel;
+			u8 num_channels;
+			s8 max_power;
+		} __attribute__ ((packed)) chans;
+		struct {
+			u8 reg_extension_id;
+			u8 reg_class;
+			u8 coverage_class;
+		} __attribute__ ((packed)) ext;
+	};
+} __attribute__ ((packed));
+
+enum ieee80211_timeout_interval_type {
+	WLAN_TIMEOUT_REASSOC_DEADLINE = 1 /* 802.11r */,
+	WLAN_TIMEOUT_KEY_LIFETIME = 2 /* 802.11r */,
+	WLAN_TIMEOUT_ASSOC_COMEBACK = 3 /* 802.11w */,
+};
+
+/* BACK action code */
+enum ieee80211_back_actioncode {
+	WLAN_ACTION_ADDBA_REQ = 0,
+	WLAN_ACTION_ADDBA_RESP = 1,
+	WLAN_ACTION_DELBA = 2,
+};
+
+/* BACK (block-ack) parties */
+enum ieee80211_back_parties {
+	WLAN_BACK_RECIPIENT = 0,
+	WLAN_BACK_INITIATOR = 1,
+};
+
+/* SA Query action */
+enum ieee80211_sa_query_action {
+	WLAN_ACTION_SA_QUERY_REQUEST = 0,
+	WLAN_ACTION_SA_QUERY_RESPONSE = 1,
+};
+
+
+/* cipher suite selectors */
+#define WLAN_CIPHER_SUITE_USE_GROUP	0x000FAC00
+#define WLAN_CIPHER_SUITE_WEP40		0x000FAC01
+#define WLAN_CIPHER_SUITE_TKIP		0x000FAC02
+/* reserved: 				0x000FAC03 */
+#define WLAN_CIPHER_SUITE_CCMP		0x000FAC04
+#define WLAN_CIPHER_SUITE_WEP104	0x000FAC05
+#define WLAN_CIPHER_SUITE_AES_CMAC	0x000FAC06
+
+#define WLAN_CIPHER_SUITE_SMS4		0x00147201
+
+/* AKM suite selectors */
+#define WLAN_AKM_SUITE_8021X		0x000FAC01
+#define WLAN_AKM_SUITE_PSK		0x000FAC02
+#define WLAN_AKM_SUITE_SAE			0x000FAC08
+#define WLAN_AKM_SUITE_FT_OVER_SAE	0x000FAC09
+
+#define WLAN_MAX_KEY_LEN		32
+
+#define WLAN_PMKID_LEN			16
+
+#define WLAN_OUI_WFA			0x506f9a
+#define WLAN_OUI_TYPE_WFA_P2P		9
+
+/*
+ * WMM/802.11e Tspec Element
+ */
+#define IEEE80211_WMM_IE_TSPEC_TID_MASK		0x0F
+#define IEEE80211_WMM_IE_TSPEC_TID_SHIFT	1
+
+enum ieee80211_tspec_status_code {
+	IEEE80211_TSPEC_STATUS_ADMISS_ACCEPTED = 0,
+	IEEE80211_TSPEC_STATUS_ADDTS_INVAL_PARAMS = 0x1,
+};
+
+struct ieee80211_tspec_ie {
+	u8 element_id;
+	u8 len;
+	u8 oui[3];
+	u8 oui_type;
+	u8 oui_subtype;
+	u8 version;
+	__le16 tsinfo;
+	u8 tsinfo_resvd;
+	__le16 nominal_msdu;
+	__le16 max_msdu;
+	__le32 min_service_int;
+	__le32 max_service_int;
+	__le32 inactivity_int;
+	__le32 suspension_int;
+	__le32 service_start_time;
+	__le32 min_data_rate;
+	__le32 mean_data_rate;
+	__le32 peak_data_rate;
+	__le32 max_burst_size;
+	__le32 delay_bound;
+	__le32 min_phy_rate;
+	__le16 sba;
+	__le16 medium_time;
+} __packed;
+
+/**
+ * ieee80211_get_qos_ctl - get pointer to qos control bytes
+ * @hdr: the frame
+ *
+ * The qos ctrl bytes come after the frame_control, duration, seq_num
+ * and 3 or 4 addresses of length ETH_ALEN.
+ * 3 addr: 2 + 2 + 2 + 3*6 = 24
+ * 4 addr: 2 + 2 + 2 + 4*6 = 30
+ */
+static inline u8 *ieee80211_get_qos_ctl(struct ieee80211_hdr *hdr)
+{
+	if (ieee80211_has_a4(hdr->frame_control))
+		return (u8 *)hdr + 30;
+	else
+		return (u8 *)hdr + 24;
+}
+
+/**
+ * ieee80211_get_SA - get pointer to SA
+ * @hdr: the frame
+ *
+ * Given an 802.11 frame, this function returns the offset
+ * to the source address (SA). It does not verify that the
+ * header is long enough to contain the address, and the
+ * header must be long enough to contain the frame control
+ * field.
+ */
+static inline u8 *ieee80211_get_SA(struct ieee80211_hdr *hdr)
+{
+	if (ieee80211_has_a4(hdr->frame_control))
+		return hdr->addr4;
+	if (ieee80211_has_fromds(hdr->frame_control))
+		return hdr->addr3;
+	return hdr->addr2;
+}
+
+/**
+ * ieee80211_get_DA - get pointer to DA
+ * @hdr: the frame
+ *
+ * Given an 802.11 frame, this function returns the offset
+ * to the destination address (DA). It does not verify that
+ * the header is long enough to contain the address, and the
+ * header must be long enough to contain the frame control
+ * field.
+ */
+static inline u8 *ieee80211_get_DA(struct ieee80211_hdr *hdr)
+{
+	if (ieee80211_has_tods(hdr->frame_control))
+		return hdr->addr3;
+	else
+		return hdr->addr1;
+}
+
+/**
+ * ieee80211_is_robust_mgmt_frame - check if frame is a robust management frame
+ * @hdr: the frame (buffer must include at least the first octet of payload)
+ */
+static inline bool ieee80211_is_robust_mgmt_frame(struct ieee80211_hdr *hdr)
+{
+	if (ieee80211_is_disassoc(hdr->frame_control) ||
+	    ieee80211_is_deauth(hdr->frame_control))
+		return true;
+
+	if (ieee80211_is_action(hdr->frame_control)) {
+		u8 *category;
+
+		/*
+		 * Action frames, excluding Public Action frames, are Robust
+		 * Management Frames. However, if we are looking at a Protected
+		 * frame, skip the check since the data may be encrypted and
+		 * the frame has already been found to be a Robust Management
+		 * Frame (by the other end).
+		 */
+		if (ieee80211_has_protected(hdr->frame_control))
+			return true;
+		category = ((u8 *) hdr) + 24;
+		return *category != WLAN_CATEGORY_PUBLIC &&
+			*category != WLAN_CATEGORY_HT &&
+			*category != WLAN_CATEGORY_SELF_PROTECTED &&
+			*category != WLAN_CATEGORY_VENDOR_SPECIFIC;
+	}
+
+	return false;
+}
+
+/**
+ * ieee80211_is_public_action - check if frame is a public action frame
+ * @hdr: the frame
+ * @len: length of the frame
+ */
+static inline bool ieee80211_is_public_action(struct ieee80211_hdr *hdr,
+					      size_t len)
+{
+	struct ieee80211_mgmt *mgmt = (void *)hdr;
+
+	if (len < IEEE80211_MIN_ACTION_SIZE)
+		return false;
+	if (!ieee80211_is_action(hdr->frame_control))
+		return false;
+	return mgmt->u.action.category == WLAN_CATEGORY_PUBLIC;
+}
+
+/**
+ * ieee80211_fhss_chan_to_freq - get channel frequency
+ * @channel: the FHSS channel
+ *
+ * Convert IEEE802.11 FHSS channel to frequency (MHz)
+ * Ref IEEE 802.11-2007 section 14.6
+ */
+static inline int ieee80211_fhss_chan_to_freq(int channel)
+{
+	if ((channel > 1) && (channel < 96))
+		return channel + 2400;
+	else
+		return -1;
+}
+
+/**
+ * ieee80211_freq_to_fhss_chan - get channel
+ * @freq: the channels frequency
+ *
+ * Convert frequency (MHz) to IEEE802.11 FHSS channel
+ * Ref IEEE 802.11-2007 section 14.6
+ */
+static inline int ieee80211_freq_to_fhss_chan(int freq)
+{
+	if ((freq > 2401) && (freq < 2496))
+		return freq - 2400;
+	else
+		return -1;
+}
+
+/**
+ * ieee80211_dsss_chan_to_freq - get channel center frequency
+ * @channel: the DSSS channel
+ *
+ * Convert IEEE802.11 DSSS channel to the center frequency (MHz).
+ * Ref IEEE 802.11-2007 section 15.6
+ */
+static inline int ieee80211_dsss_chan_to_freq(int channel)
+{
+	if ((channel > 0) && (channel < 14))
+		return 2407 + (channel * 5);
+	else if (channel == 14)
+		return 2484;
+	else
+		return -1;
+}
+
+/**
+ * ieee80211_freq_to_dsss_chan - get channel
+ * @freq: the frequency
+ *
+ * Convert frequency (MHz) to IEEE802.11 DSSS channel
+ * Ref IEEE 802.11-2007 section 15.6
+ *
+ * This routine selects the channel with the closest center frequency.
+ */
+static inline int ieee80211_freq_to_dsss_chan(int freq)
+{
+	if ((freq >= 2410) && (freq < 2475))
+		return (freq - 2405) / 5;
+	else if ((freq >= 2482) && (freq < 2487))
+		return 14;
+	else
+		return -1;
+}
+
+/* Convert IEEE802.11 HR DSSS channel to frequency (MHz) and back
+ * Ref IEEE 802.11-2007 section 18.4.6.2
+ *
+ * The channels and frequencies are the same as those defined for DSSS
+ */
+#define ieee80211_hr_chan_to_freq(chan) ieee80211_dsss_chan_to_freq(chan)
+#define ieee80211_freq_to_hr_chan(freq) ieee80211_freq_to_dsss_chan(freq)
+
+/* Convert IEEE802.11 ERP channel to frequency (MHz) and back
+ * Ref IEEE 802.11-2007 section 19.4.2
+ */
+#define ieee80211_erp_chan_to_freq(chan) ieee80211_hr_chan_to_freq(chan)
+#define ieee80211_freq_to_erp_chan(freq) ieee80211_freq_to_hr_chan(freq)
+
+/**
+ * ieee80211_ofdm_chan_to_freq - get channel center frequency
+ * @s_freq: starting frequency == (dotChannelStartingFactor/2) MHz
+ * @channel: the OFDM channel
+ *
+ * Convert IEEE802.11 OFDM channel to center frequency (MHz)
+ * Ref IEEE 802.11-2007 section 17.3.8.3.2
+ */
+static inline int ieee80211_ofdm_chan_to_freq(int s_freq, int channel)
+{
+	if ((channel > 0) && (channel <= 200) &&
+	    (s_freq >= 4000))
+		return s_freq + (channel * 5);
+	else
+		return -1;
+}
+
+/**
+ * ieee80211_freq_to_ofdm_channel - get channel
+ * @s_freq: starting frequency == (dotChannelStartingFactor/2) MHz
+ * @freq: the frequency
+ *
+ * Convert frequency (MHz) to IEEE802.11 OFDM channel
+ * Ref IEEE 802.11-2007 section 17.3.8.3.2
+ *
+ * This routine selects the channel with the closest center frequency.
+ */
+static inline int ieee80211_freq_to_ofdm_chan(int s_freq, int freq)
+{
+	if ((freq > (s_freq + 2)) && (freq <= (s_freq + 1202)) &&
+	    (s_freq >= 4000))
+		return (freq + 2 - s_freq) / 5;
+	else
+		return -1;
+}
+
+/**
+ * ieee80211_tu_to_usec - convert time units (TU) to microseconds
+ * @tu: the TUs
+ */
+static inline unsigned long ieee80211_tu_to_usec(unsigned long tu)
+{
+	return 1024 * tu;
+}
+
+/**
+ * ieee80211_check_tim - check if AID bit is set in TIM
+ * @tim: the TIM IE
+ * @tim_len: length of the TIM IE
+ * @aid: the AID to look for
+ */
+static inline bool ieee80211_check_tim(struct ieee80211_tim_ie *tim,
+				       u8 tim_len, u16 aid)
+{
+	u8 mask;
+	u8 index, indexn1, indexn2;
+
+	if (unlikely(!tim || tim_len < sizeof(*tim)))
+		return false;
+
+	aid &= 0x3fff;
+	index = aid / 8;
+	mask  = 1 << (aid & 7);
+
+	indexn1 = tim->bitmap_ctrl & 0xfe;
+	indexn2 = tim_len + indexn1 - 4;
+
+	if (index < indexn1 || index > indexn2)
+		return false;
+
+	index -= indexn1;
+
+	return !!(tim->virtual_map[index] & mask);
+}
+
+#endif /* LINUX_IEEE80211_H */
diff --git a/include/linux/if.h b/include/linux/if.h
new file mode 100644
index 00000000..f995c663
--- /dev/null
+++ b/include/linux/if.h
@@ -0,0 +1,233 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the INET interface module.
+ *
+ * Version:	@(#)if.h	1.0.2	04/18/93
+ *
+ * Authors:	Original taken from Berkeley UNIX 4.3, (c) UCB 1982-1988
+ *		Ross Biro
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_IF_H
+#define _LINUX_IF_H
+
+#include <linux/types.h>		/* for "__kernel_caddr_t" et al	*/
+#include <linux/socket.h>		/* for "struct sockaddr" et al	*/
+#include <linux/compiler.h>		/* for "__user" et al           */
+
+#define	IFNAMSIZ	16
+#define	IFALIASZ	256
+#include <linux/hdlc/ioctl.h>
+
+/* Standard interface flags (netdevice->flags). */
+#define	IFF_UP		0x1		/* interface is up		*/
+#define	IFF_BROADCAST	0x2		/* broadcast address valid	*/
+#define	IFF_DEBUG	0x4		/* turn on debugging		*/
+#define	IFF_LOOPBACK	0x8		/* is a loopback net		*/
+#define	IFF_POINTOPOINT	0x10		/* interface is has p-p link	*/
+#define	IFF_NOTRAILERS	0x20		/* avoid use of trailers	*/
+#define	IFF_RUNNING	0x40		/* interface RFC2863 OPER_UP	*/
+#define	IFF_NOARP	0x80		/* no ARP protocol		*/
+#define	IFF_PROMISC	0x100		/* receive all packets		*/
+#define	IFF_ALLMULTI	0x200		/* receive all multicast packets*/
+
+#define IFF_MASTER	0x400		/* master of a load balancer 	*/
+#define IFF_SLAVE	0x800		/* slave of a load balancer	*/
+
+#define IFF_MULTICAST	0x1000		/* Supports multicast		*/
+
+#define IFF_PORTSEL	0x2000          /* can set media type		*/
+#define IFF_AUTOMEDIA	0x4000		/* auto media select active	*/
+#define IFF_DYNAMIC	0x8000		/* dialup device with changing addresses*/
+
+#define IFF_LOWER_UP	0x10000		/* driver signals L1 up		*/
+#define IFF_DORMANT	0x20000		/* driver signals dormant	*/
+
+#define IFF_ECHO	0x40000		/* echo sent packets		*/
+
+#define IFF_VOLATILE	(IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\
+		IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT)
+
+/* Private (from user) interface flags (netdevice->priv_flags). */
+#define IFF_802_1Q_VLAN 0x1             /* 802.1Q VLAN device.          */
+#define IFF_EBRIDGE	0x2		/* Ethernet bridging device.	*/
+#define IFF_SLAVE_INACTIVE	0x4	/* bonding slave not the curr. active */
+#define IFF_MASTER_8023AD	0x8	/* bonding master, 802.3ad. 	*/
+#define IFF_MASTER_ALB	0x10		/* bonding master, balance-alb.	*/
+#define IFF_BONDING	0x20		/* bonding master or slave	*/
+#define IFF_SLAVE_NEEDARP 0x40		/* need ARPs for validation	*/
+#define IFF_ISATAP	0x80		/* ISATAP interface (RFC4214)	*/
+#define IFF_MASTER_ARPMON 0x100		/* bonding master, ARP mon in use */
+#define IFF_WAN_HDLC	0x200		/* WAN HDLC device		*/
+#define IFF_XMIT_DST_RELEASE 0x400	/* dev_hard_start_xmit() is allowed to
+					 * release skb->dst
+					 */
+#define IFF_DONT_BRIDGE 0x800		/* disallow bridging this ether dev */
+#define IFF_DISABLE_NETPOLL	0x1000	/* disable netpoll at run-time */
+#define IFF_MACVLAN_PORT	0x2000	/* device used as macvlan port */
+#define IFF_BRIDGE_PORT	0x4000		/* device used as bridge port */
+#define IFF_OVS_DATAPATH	0x8000	/* device used as Open vSwitch
+					 * datapath port */
+#define IFF_TX_SKB_SHARING	0x10000	/* The interface supports sharing
+					 * skbs on transmit */
+#define IFF_UNICAST_FLT	0x20000		/* Supports unicast filtering	*/
+#define IFF_TEAM_PORT	0x40000		/* device used as team port */
+#define IFF_SUPP_NOFCS	0x80000		/* device supports sending custom FCS */
+
+
+#define IF_GET_IFACE	0x0001		/* for querying only */
+#define IF_GET_PROTO	0x0002
+
+/* For definitions see hdlc.h */
+#define IF_IFACE_V35	0x1000		/* V.35 serial interface	*/
+#define IF_IFACE_V24	0x1001		/* V.24 serial interface	*/
+#define IF_IFACE_X21	0x1002		/* X.21 serial interface	*/
+#define IF_IFACE_T1	0x1003		/* T1 telco serial interface	*/
+#define IF_IFACE_E1	0x1004		/* E1 telco serial interface	*/
+#define IF_IFACE_SYNC_SERIAL 0x1005	/* can't be set by software	*/
+#define IF_IFACE_X21D   0x1006          /* X.21 Dual Clocking (FarSite) */
+
+/* For definitions see hdlc.h */
+#define IF_PROTO_HDLC	0x2000		/* raw HDLC protocol		*/
+#define IF_PROTO_PPP	0x2001		/* PPP protocol			*/
+#define IF_PROTO_CISCO	0x2002		/* Cisco HDLC protocol		*/
+#define IF_PROTO_FR	0x2003		/* Frame Relay protocol		*/
+#define IF_PROTO_FR_ADD_PVC 0x2004	/*    Create FR PVC		*/
+#define IF_PROTO_FR_DEL_PVC 0x2005	/*    Delete FR PVC		*/
+#define IF_PROTO_X25	0x2006		/* X.25				*/
+#define IF_PROTO_HDLC_ETH 0x2007	/* raw HDLC, Ethernet emulation	*/
+#define IF_PROTO_FR_ADD_ETH_PVC 0x2008	/*  Create FR Ethernet-bridged PVC */
+#define IF_PROTO_FR_DEL_ETH_PVC 0x2009	/*  Delete FR Ethernet-bridged PVC */
+#define IF_PROTO_FR_PVC	0x200A		/* for reading PVC status	*/
+#define IF_PROTO_FR_ETH_PVC 0x200B
+#define IF_PROTO_RAW    0x200C          /* RAW Socket                   */
+
+/* RFC 2863 operational status */
+enum {
+	IF_OPER_UNKNOWN,
+	IF_OPER_NOTPRESENT,
+	IF_OPER_DOWN,
+	IF_OPER_LOWERLAYERDOWN,
+	IF_OPER_TESTING,
+	IF_OPER_DORMANT,
+	IF_OPER_UP,
+};
+
+/* link modes */
+enum {
+	IF_LINK_MODE_DEFAULT,
+	IF_LINK_MODE_DORMANT,	/* limit upward transition to dormant */
+};
+
+/*
+ *	Device mapping structure. I'd just gone off and designed a 
+ *	beautiful scheme using only loadable modules with arguments
+ *	for driver options and along come the PCMCIA people 8)
+ *
+ *	Ah well. The get() side of this is good for WDSETUP, and it'll
+ *	be handy for debugging things. The set side is fine for now and
+ *	being very small might be worth keeping for clean configuration.
+ */
+
+struct ifmap {
+	unsigned long mem_start;
+	unsigned long mem_end;
+	unsigned short base_addr; 
+	unsigned char irq;
+	unsigned char dma;
+	unsigned char port;
+	/* 3 bytes spare */
+};
+
+struct if_settings {
+	unsigned int type;	/* Type of physical device or protocol */
+	unsigned int size;	/* Size of the data allocated by the caller */
+	union {
+		/* {atm/eth/dsl}_settings anyone ? */
+		raw_hdlc_proto		__user *raw_hdlc;
+		cisco_proto		__user *cisco;
+		fr_proto		__user *fr;
+		fr_proto_pvc		__user *fr_pvc;
+		fr_proto_pvc_info	__user *fr_pvc_info;
+
+		/* interface settings */
+		sync_serial_settings	__user *sync;
+		te1_settings		__user *te1;
+	} ifs_ifsu;
+};
+
+/*
+ * Interface request structure used for socket
+ * ioctl's.  All interface ioctl's must have parameter
+ * definitions which begin with ifr_name.  The
+ * remainder may be interface specific.
+ */
+
+struct ifreq {
+#define IFHWADDRLEN	6
+	union
+	{
+		char	ifrn_name[IFNAMSIZ];		/* if name, e.g. "en0" */
+	} ifr_ifrn;
+	
+	union {
+		struct	sockaddr ifru_addr;
+		struct	sockaddr ifru_dstaddr;
+		struct	sockaddr ifru_broadaddr;
+		struct	sockaddr ifru_netmask;
+		struct  sockaddr ifru_hwaddr;
+		short	ifru_flags;
+		int	ifru_ivalue;
+		int	ifru_mtu;
+		struct  ifmap ifru_map;
+		char	ifru_slave[IFNAMSIZ];	/* Just fits the size */
+		char	ifru_newname[IFNAMSIZ];
+		void __user *	ifru_data;
+		struct	if_settings ifru_settings;
+	} ifr_ifru;
+};
+
+#define ifr_name	ifr_ifrn.ifrn_name	/* interface name 	*/
+#define ifr_hwaddr	ifr_ifru.ifru_hwaddr	/* MAC address 		*/
+#define	ifr_addr	ifr_ifru.ifru_addr	/* address		*/
+#define	ifr_dstaddr	ifr_ifru.ifru_dstaddr	/* other end of p-p lnk	*/
+#define	ifr_broadaddr	ifr_ifru.ifru_broadaddr	/* broadcast address	*/
+#define	ifr_netmask	ifr_ifru.ifru_netmask	/* interface net mask	*/
+#define	ifr_flags	ifr_ifru.ifru_flags	/* flags		*/
+#define	ifr_metric	ifr_ifru.ifru_ivalue	/* metric		*/
+#define	ifr_mtu		ifr_ifru.ifru_mtu	/* mtu			*/
+#define ifr_map		ifr_ifru.ifru_map	/* device map		*/
+#define ifr_slave	ifr_ifru.ifru_slave	/* slave device		*/
+#define	ifr_data	ifr_ifru.ifru_data	/* for use by interface	*/
+#define ifr_ifindex	ifr_ifru.ifru_ivalue	/* interface index	*/
+#define ifr_bandwidth	ifr_ifru.ifru_ivalue    /* link bandwidth	*/
+#define ifr_qlen	ifr_ifru.ifru_ivalue	/* Queue length 	*/
+#define ifr_newname	ifr_ifru.ifru_newname	/* New name		*/
+#define ifr_settings	ifr_ifru.ifru_settings	/* Device/proto settings*/
+
+/*
+ * Structure used in SIOCGIFCONF request.
+ * Used to retrieve interface configuration
+ * for machine (useful for programs which
+ * must know all networks accessible).
+ */
+
+struct ifconf  {
+	int	ifc_len;			/* size of buffer	*/
+	union {
+		char __user *ifcu_buf;
+		struct ifreq __user *ifcu_req;
+	} ifc_ifcu;
+};
+#define	ifc_buf	ifc_ifcu.ifcu_buf		/* buffer address	*/
+#define	ifc_req	ifc_ifcu.ifcu_req		/* array of structures	*/
+
+#endif /* _LINUX_IF_H */
diff --git a/include/linux/if_addr.h b/include/linux/if_addr.h
new file mode 100644
index 00000000..23357ab8
--- /dev/null
+++ b/include/linux/if_addr.h
@@ -0,0 +1,61 @@
+#ifndef __LINUX_IF_ADDR_H
+#define __LINUX_IF_ADDR_H
+
+#include <linux/types.h>
+#include <linux/netlink.h>
+
+struct ifaddrmsg {
+	__u8		ifa_family;
+	__u8		ifa_prefixlen;	/* The prefix length		*/
+	__u8		ifa_flags;	/* Flags			*/
+	__u8		ifa_scope;	/* Address scope		*/
+	__u32		ifa_index;	/* Link index			*/
+};
+
+/*
+ * Important comment:
+ * IFA_ADDRESS is prefix address, rather than local interface address.
+ * It makes no difference for normally configured broadcast interfaces,
+ * but for point-to-point IFA_ADDRESS is DESTINATION address,
+ * local address is supplied in IFA_LOCAL attribute.
+ */
+enum {
+	IFA_UNSPEC,
+	IFA_ADDRESS,
+	IFA_LOCAL,
+	IFA_LABEL,
+	IFA_BROADCAST,
+	IFA_ANYCAST,
+	IFA_CACHEINFO,
+	IFA_MULTICAST,
+	__IFA_MAX,
+};
+
+#define IFA_MAX (__IFA_MAX - 1)
+
+/* ifa_flags */
+#define IFA_F_SECONDARY		0x01
+#define IFA_F_TEMPORARY		IFA_F_SECONDARY
+
+#define	IFA_F_NODAD		0x02
+#define IFA_F_OPTIMISTIC	0x04
+#define IFA_F_DADFAILED		0x08
+#define	IFA_F_HOMEADDRESS	0x10
+#define IFA_F_DEPRECATED	0x20
+#define IFA_F_TENTATIVE		0x40
+#define IFA_F_PERMANENT		0x80
+
+struct ifa_cacheinfo {
+	__u32	ifa_prefered;
+	__u32	ifa_valid;
+	__u32	cstamp; /* created timestamp, hundredths of seconds */
+	__u32	tstamp; /* updated timestamp, hundredths of seconds */
+};
+
+/* backwards compatibility for userspace */
+#ifndef __KERNEL__
+#define IFA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifaddrmsg))))
+#define IFA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifaddrmsg))
+#endif
+
+#endif
diff --git a/include/linux/if_addrlabel.h b/include/linux/if_addrlabel.h
new file mode 100644
index 00000000..54580c29
--- /dev/null
+++ b/include/linux/if_addrlabel.h
@@ -0,0 +1,32 @@
+/*
+ * if_addrlabel.h - netlink interface for address labels
+ *
+ * Copyright (C)2007 USAGI/WIDE Project,  All Rights Reserved.
+ *
+ * Authors:
+ *	YOSHIFUJI Hideaki @ USAGI/WIDE <yoshfuji@linux-ipv6.org>
+ */
+
+#ifndef __LINUX_IF_ADDRLABEL_H
+#define __LINUX_IF_ADDRLABEL_H
+
+#include <linux/types.h>
+
+struct ifaddrlblmsg {
+	__u8		ifal_family;		/* Address family */
+	__u8		__ifal_reserved;	/* Reserved */
+	__u8		ifal_prefixlen;		/* Prefix length */
+	__u8		ifal_flags;		/* Flags */
+	__u32		ifal_index;		/* Link index */
+	__u32		ifal_seq;		/* sequence number */
+};
+
+enum {
+	IFAL_ADDRESS = 1,
+	IFAL_LABEL = 2,
+	__IFAL_MAX
+};
+
+#define IFAL_MAX	(__IFAL_MAX - 1)
+
+#endif
diff --git a/include/linux/if_alg.h b/include/linux/if_alg.h
new file mode 100644
index 00000000..0f9acce5
--- /dev/null
+++ b/include/linux/if_alg.h
@@ -0,0 +1,40 @@
+/*
+ * if_alg: User-space algorithm interface
+ *
+ * Copyright (c) 2010 Herbert Xu <herbert@gondor.apana.org.au>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+
+#ifndef _LINUX_IF_ALG_H
+#define _LINUX_IF_ALG_H
+
+#include <linux/types.h>
+
+struct sockaddr_alg {
+	__u16	salg_family;
+	__u8	salg_type[14];
+	__u32	salg_feat;
+	__u32	salg_mask;
+	__u8	salg_name[64];
+};
+
+struct af_alg_iv {
+	__u32	ivlen;
+	__u8	iv[0];
+};
+
+/* Socket options */
+#define ALG_SET_KEY			1
+#define ALG_SET_IV			2
+#define ALG_SET_OP			3
+
+/* Operations */
+#define ALG_OP_DECRYPT			0
+#define ALG_OP_ENCRYPT			1
+
+#endif	/* _LINUX_IF_ALG_H */
diff --git a/include/linux/if_arcnet.h b/include/linux/if_arcnet.h
new file mode 100644
index 00000000..46e34bd0
--- /dev/null
+++ b/include/linux/if_arcnet.h
@@ -0,0 +1,132 @@
+/*
+ * INET         An implementation of the TCP/IP protocol suite for the LINUX
+ *              operating system.  INET is implemented using the  BSD Socket
+ *              interface as the means of communication with the user level.
+ *
+ *              Global definitions for the ARCnet interface.
+ *
+ * Authors:     David Woodhouse and Avery Pennarun
+ *
+ *              This program is free software; you can redistribute it and/or
+ *              modify it under the terms of the GNU General Public License
+ *              as published by the Free Software Foundation; either version
+ *              2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_IF_ARCNET_H
+#define _LINUX_IF_ARCNET_H
+
+#include <linux/types.h>
+#include <linux/if_ether.h>
+
+
+/*
+ *    These are the defined ARCnet Protocol ID's.
+ */
+
+/* CAP mode */
+/* No macro but uses 1-8 */
+
+/* RFC1201 Protocol ID's */
+#define ARC_P_IP		212	/* 0xD4 */
+#define ARC_P_IPV6		196	/* 0xC4: RFC2497 */
+#define ARC_P_ARP		213	/* 0xD5 */
+#define ARC_P_RARP		214	/* 0xD6 */
+#define ARC_P_IPX		250	/* 0xFA */
+#define ARC_P_NOVELL_EC		236	/* 0xEC */
+
+/* Old RFC1051 Protocol ID's */
+#define ARC_P_IP_RFC1051	240	/* 0xF0 */
+#define ARC_P_ARP_RFC1051	241	/* 0xF1 */
+
+/* MS LanMan/WfWg "NDIS" encapsulation */
+#define ARC_P_ETHER		232	/* 0xE8 */
+
+/* Unsupported/indirectly supported protocols */
+#define ARC_P_DATAPOINT_BOOT	0	/* very old Datapoint equipment */
+#define ARC_P_DATAPOINT_MOUNT	1
+#define ARC_P_POWERLAN_BEACON	8	/* Probably ATA-Netbios related */
+#define ARC_P_POWERLAN_BEACON2	243	/* 0xF3 */
+#define ARC_P_LANSOFT		251	/* 0xFB - what is this? */
+#define ARC_P_ATALK		0xDD
+
+/* Hardware address length */
+#define ARCNET_ALEN	1
+
+/*
+ * The RFC1201-specific components of an arcnet packet header.
+ */
+struct arc_rfc1201 {
+    __u8  proto;		/* protocol ID field - varies		*/
+    __u8  split_flag;	/* for use with split packets		*/
+    __be16   sequence;		/* sequence number			*/
+    __u8  payload[0];	/* space remaining in packet (504 bytes)*/
+};
+#define RFC1201_HDR_SIZE 4
+
+
+/*
+ * The RFC1051-specific components.
+ */
+struct arc_rfc1051 {
+    __u8 proto;		/* ARC_P_RFC1051_ARP/RFC1051_IP	*/
+    __u8 payload[0];		/* 507 bytes			*/
+};
+#define RFC1051_HDR_SIZE 1
+
+
+/*
+ * The ethernet-encap-specific components.  We have a real ethernet header
+ * and some data.
+ */
+struct arc_eth_encap {
+    __u8 proto;		/* Always ARC_P_ETHER			*/
+    struct ethhdr eth;		/* standard ethernet header (yuck!)	*/
+    __u8 payload[0];		/* 493 bytes				*/
+};
+#define ETH_ENCAP_HDR_SIZE 14
+
+
+struct arc_cap {
+	__u8 proto;
+	__u8 cookie[sizeof(int)];   /* Actually NOT sent over the network */
+	union {
+		__u8 ack;
+		__u8 raw[0];		/* 507 bytes */
+	} mes;
+};
+
+/*
+ * The data needed by the actual arcnet hardware.
+ *
+ * Now, in the real arcnet hardware, the third and fourth bytes are the
+ * 'offset' specification instead of the length, and the soft data is at
+ * the _end_ of the 512-byte buffer.  We hide this complexity inside the
+ * driver.
+ */
+struct arc_hardware {
+    __u8  source,		/* source ARCnet - filled in automagically */
+             dest,		/* destination ARCnet - 0 for broadcast    */
+    	     offset[2];		/* offset bytes (some weird semantics)     */
+};
+#define ARC_HDR_SIZE 4
+
+/*
+ * This is an ARCnet frame header, as seen by the kernel (and userspace,
+ * when you do a raw packet capture).
+ */
+struct archdr {
+    /* hardware requirements */
+    struct arc_hardware hard;
+     
+    /* arcnet encapsulation-specific bits */
+    union {
+	struct arc_rfc1201   rfc1201;
+	struct arc_rfc1051   rfc1051;
+	struct arc_eth_encap eth_encap;
+	struct arc_cap       cap;
+	__u8 raw[0];		/* 508 bytes				*/
+    } soft;
+};
+
+#endif				/* _LINUX_IF_ARCNET_H */
diff --git a/include/linux/if_arp.h b/include/linux/if_arp.h
new file mode 100644
index 00000000..6d722f41
--- /dev/null
+++ b/include/linux/if_arp.h
@@ -0,0 +1,171 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the ARP (RFC 826) protocol.
+ *
+ * Version:	@(#)if_arp.h	1.0.1	04/16/93
+ *
+ * Authors:	Original taken from Berkeley UNIX 4.3, (c) UCB 1986-1988
+ *		Portions taken from the KA9Q/NOS (v2.00m PA0GRI) source.
+ *		Ross Biro
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Florian La Roche,
+ *		Jonathan Layes <layes@loran.com>
+ *		Arnaldo Carvalho de Melo <acme@conectiva.com.br> ARPHRD_HWX25
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_IF_ARP_H
+#define _LINUX_IF_ARP_H
+
+#include <linux/netdevice.h>
+
+/* ARP protocol HARDWARE identifiers. */
+#define ARPHRD_NETROM	0		/* from KA9Q: NET/ROM pseudo	*/
+#define ARPHRD_ETHER 	1		/* Ethernet 10Mbps		*/
+#define	ARPHRD_EETHER	2		/* Experimental Ethernet	*/
+#define	ARPHRD_AX25	3		/* AX.25 Level 2		*/
+#define	ARPHRD_PRONET	4		/* PROnet token ring		*/
+#define	ARPHRD_CHAOS	5		/* Chaosnet			*/
+#define	ARPHRD_IEEE802	6		/* IEEE 802.2 Ethernet/TR/TB	*/
+#define	ARPHRD_ARCNET	7		/* ARCnet			*/
+#define	ARPHRD_APPLETLK	8		/* APPLEtalk			*/
+#define ARPHRD_DLCI	15		/* Frame Relay DLCI		*/
+#define ARPHRD_ATM	19		/* ATM 				*/
+#define ARPHRD_METRICOM	23		/* Metricom STRIP (new IANA id)	*/
+#define	ARPHRD_IEEE1394	24		/* IEEE 1394 IPv4 - RFC 2734	*/
+#define ARPHRD_EUI64	27		/* EUI-64                       */
+#define ARPHRD_INFINIBAND 32		/* InfiniBand			*/
+
+/* Dummy types for non ARP hardware */
+#define ARPHRD_SLIP	256
+#define ARPHRD_CSLIP	257
+#define ARPHRD_SLIP6	258
+#define ARPHRD_CSLIP6	259
+#define ARPHRD_RSRVD	260		/* Notional KISS type 		*/
+#define ARPHRD_ADAPT	264
+#define ARPHRD_ROSE	270
+#define ARPHRD_X25	271		/* CCITT X.25			*/
+#define ARPHRD_HWX25	272		/* Boards with X.25 in firmware	*/
+#define ARPHRD_CAN	280		/* Controller Area Network      */
+#define ARPHRD_PPP	512
+#define ARPHRD_CISCO	513		/* Cisco HDLC	 		*/
+#define ARPHRD_HDLC	ARPHRD_CISCO
+#define ARPHRD_LAPB	516		/* LAPB				*/
+#define ARPHRD_DDCMP    517		/* Digital's DDCMP protocol     */
+#define ARPHRD_RAWHDLC	518		/* Raw HDLC			*/
+
+#define ARPHRD_TUNNEL	768		/* IPIP tunnel			*/
+#define ARPHRD_TUNNEL6	769		/* IP6IP6 tunnel       		*/
+#define ARPHRD_FRAD	770             /* Frame Relay Access Device    */
+#define ARPHRD_SKIP	771		/* SKIP vif			*/
+#define ARPHRD_LOOPBACK	772		/* Loopback device		*/
+#define ARPHRD_LOCALTLK 773		/* Localtalk device		*/
+#define ARPHRD_FDDI	774		/* Fiber Distributed Data Interface */
+#define ARPHRD_BIF      775             /* AP1000 BIF                   */
+#define ARPHRD_SIT	776		/* sit0 device - IPv6-in-IPv4	*/
+#define ARPHRD_IPDDP	777		/* IP over DDP tunneller	*/
+#define ARPHRD_IPGRE	778		/* GRE over IP			*/
+#define ARPHRD_PIMREG	779		/* PIMSM register interface	*/
+#define ARPHRD_HIPPI	780		/* High Performance Parallel Interface */
+#define ARPHRD_ASH	781		/* Nexus 64Mbps Ash		*/
+#define ARPHRD_ECONET	782		/* Acorn Econet			*/
+#define ARPHRD_IRDA 	783		/* Linux-IrDA			*/
+/* ARP works differently on different FC media .. so  */
+#define ARPHRD_FCPP	784		/* Point to point fibrechannel	*/
+#define ARPHRD_FCAL	785		/* Fibrechannel arbitrated loop */
+#define ARPHRD_FCPL	786		/* Fibrechannel public loop	*/
+#define ARPHRD_FCFABRIC	787		/* Fibrechannel fabric		*/
+	/* 787->799 reserved for fibrechannel media types */
+#define ARPHRD_IEEE802_TR 800		/* Magic type ident for TR	*/
+#define ARPHRD_IEEE80211 801		/* IEEE 802.11			*/
+#define ARPHRD_IEEE80211_PRISM 802	/* IEEE 802.11 + Prism2 header  */
+#define ARPHRD_IEEE80211_RADIOTAP 803	/* IEEE 802.11 + radiotap header */
+#define ARPHRD_IEEE802154	  804
+
+#define ARPHRD_PHONET	820		/* PhoNet media type		*/
+#define ARPHRD_PHONET_PIPE 821		/* PhoNet pipe header		*/
+#define ARPHRD_CAIF	822		/* CAIF media type		*/
+
+#define ARPHRD_VOID	  0xFFFF	/* Void type, nothing is known */
+#define ARPHRD_NONE	  0xFFFE	/* zero header length */
+
+/* ARP protocol opcodes. */
+#define	ARPOP_REQUEST	1		/* ARP request			*/
+#define	ARPOP_REPLY	2		/* ARP reply			*/
+#define	ARPOP_RREQUEST	3		/* RARP request			*/
+#define	ARPOP_RREPLY	4		/* RARP reply			*/
+#define	ARPOP_InREQUEST	8		/* InARP request		*/
+#define	ARPOP_InREPLY	9		/* InARP reply			*/
+#define	ARPOP_NAK	10		/* (ATM)ARP NAK			*/
+
+
+/* ARP ioctl request. */
+struct arpreq {
+  struct sockaddr	arp_pa;		/* protocol address		*/
+  struct sockaddr	arp_ha;		/* hardware address		*/
+  int			arp_flags;	/* flags			*/
+  struct sockaddr       arp_netmask;    /* netmask (only for proxy arps) */
+  char			arp_dev[16];
+};
+
+struct arpreq_old {
+  struct sockaddr	arp_pa;		/* protocol address		*/
+  struct sockaddr	arp_ha;		/* hardware address		*/
+  int			arp_flags;	/* flags			*/
+  struct sockaddr       arp_netmask;    /* netmask (only for proxy arps) */
+};
+
+/* ARP Flag values. */
+#define ATF_COM		0x02		/* completed entry (ha valid)	*/
+#define	ATF_PERM	0x04		/* permanent entry		*/
+#define	ATF_PUBL	0x08		/* publish entry		*/
+#define	ATF_USETRAILERS	0x10		/* has requested trailers	*/
+#define ATF_NETMASK     0x20            /* want to use a netmask (only
+					   for proxy entries) */
+#define ATF_DONTPUB	0x40		/* don't answer this addresses	*/
+
+/*
+ *	This structure defines an ethernet arp header.
+ */
+
+struct arphdr {
+	__be16		ar_hrd;		/* format of hardware address	*/
+	__be16		ar_pro;		/* format of protocol address	*/
+	unsigned char	ar_hln;		/* length of hardware address	*/
+	unsigned char	ar_pln;		/* length of protocol address	*/
+	__be16		ar_op;		/* ARP opcode (command)		*/
+
+#if 0
+	 /*
+	  *	 Ethernet looks like this : This bit is variable sized however...
+	  */
+	unsigned char		ar_sha[ETH_ALEN];	/* sender hardware address	*/
+	unsigned char		ar_sip[4];		/* sender IP address		*/
+	unsigned char		ar_tha[ETH_ALEN];	/* target hardware address	*/
+	unsigned char		ar_tip[4];		/* target IP address		*/
+#endif
+
+};
+
+#ifdef __KERNEL__
+#include <linux/skbuff.h>
+
+static inline struct arphdr *arp_hdr(const struct sk_buff *skb)
+{
+	return (struct arphdr *)skb_network_header(skb);
+}
+
+static inline int arp_hdr_len(struct net_device *dev)
+{
+	/* ARP header, plus 2 device addresses, plus 2 IP addresses. */
+	return sizeof(struct arphdr) + (dev->addr_len + sizeof(u32)) * 2;
+}
+#endif
+
+#endif	/* _LINUX_IF_ARP_H */
diff --git a/include/linux/if_bonding.h b/include/linux/if_bonding.h
new file mode 100644
index 00000000..a17edda8
--- /dev/null
+++ b/include/linux/if_bonding.h
@@ -0,0 +1,128 @@
+/*
+ * Bond several ethernet interfaces into a Cisco, running 'Etherchannel'.
+ *
+ *
+ * Portions are (c) Copyright 1995 Simon "Guru Aleph-Null" Janes
+ * NCM: Network and Communications Management, Inc.
+ *
+ * BUT, I'm the one who modified it for ethernet, so:
+ * (c) Copyright 1999, Thomas Davis, tadavis@lbl.gov
+ *
+ *	This software may be used and distributed according to the terms
+ *	of the GNU Public License, incorporated herein by reference.
+ *
+ * 2003/03/18 - Amir Noam <amir.noam at intel dot com>
+ *	- Added support for getting slave's speed and duplex via ethtool.
+ *	  Needed for 802.3ad and other future modes.
+ *
+ * 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
+ *		Shmulik Hen <shmulik.hen at intel dot com>
+ *	- Enable support of modes that need to use the unique mac address of
+ *	  each slave.
+ *
+ * 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
+ *		Amir Noam <amir.noam at intel dot com>
+ *	- Moved driver's private data types to bonding.h
+ *
+ * 2003/03/18 - Amir Noam <amir.noam at intel dot com>,
+ *		Tsippy Mendelson <tsippy.mendelson at intel dot com> and
+ *		Shmulik Hen <shmulik.hen at intel dot com>
+ *	- Added support for IEEE 802.3ad Dynamic link aggregation mode.
+ *
+ * 2003/05/01 - Amir Noam <amir.noam at intel dot com>
+ *	- Added ABI version control to restore compatibility between
+ *	  new/old ifenslave and new/old bonding.
+ *
+ * 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com>
+ *	- Code cleanup and style changes
+ *
+ * 2005/05/05 - Jason Gabler <jygabler at lbl dot gov>
+ *      - added definitions for various XOR hashing policies
+ */
+
+#ifndef _LINUX_IF_BONDING_H
+#define _LINUX_IF_BONDING_H
+
+#include <linux/if.h>
+#include <linux/types.h>
+#include <linux/if_ether.h>
+
+/* userland - kernel ABI version (2003/05/08) */
+#define BOND_ABI_VERSION 2
+
+/*
+ * We can remove these ioctl definitions in 2.5.  People should use the
+ * SIOC*** versions of them instead
+ */
+#define BOND_ENSLAVE_OLD		(SIOCDEVPRIVATE)
+#define BOND_RELEASE_OLD		(SIOCDEVPRIVATE + 1)
+#define BOND_SETHWADDR_OLD		(SIOCDEVPRIVATE + 2)
+#define BOND_SLAVE_INFO_QUERY_OLD	(SIOCDEVPRIVATE + 11)
+#define BOND_INFO_QUERY_OLD		(SIOCDEVPRIVATE + 12)
+#define BOND_CHANGE_ACTIVE_OLD		(SIOCDEVPRIVATE + 13)
+
+#define BOND_CHECK_MII_STATUS	(SIOCGMIIPHY)
+
+#define BOND_MODE_ROUNDROBIN	0
+#define BOND_MODE_ACTIVEBACKUP	1
+#define BOND_MODE_XOR		2
+#define BOND_MODE_BROADCAST	3
+#define BOND_MODE_8023AD        4
+#define BOND_MODE_TLB           5
+#define BOND_MODE_ALB		6 /* TLB + RLB (receive load balancing) */
+
+/* each slave's link has 4 states */
+#define BOND_LINK_UP    0           /* link is up and running */
+#define BOND_LINK_FAIL  1           /* link has just gone down */
+#define BOND_LINK_DOWN  2           /* link has been down for too long time */
+#define BOND_LINK_BACK  3           /* link is going back */
+
+/* each slave has several states */
+#define BOND_STATE_ACTIVE       0   /* link is active */
+#define BOND_STATE_BACKUP       1   /* link is backup */
+
+#define BOND_DEFAULT_MAX_BONDS  1   /* Default maximum number of devices to support */
+
+#define BOND_DEFAULT_TX_QUEUES 16   /* Default number of tx queues per device */
+
+#define BOND_DEFAULT_RESEND_IGMP	1 /* Default number of IGMP membership reports */
+
+/* hashing types */
+#define BOND_XMIT_POLICY_LAYER2		0 /* layer 2 (MAC only), default */
+#define BOND_XMIT_POLICY_LAYER34	1 /* layer 3+4 (IP ^ (TCP || UDP)) */
+#define BOND_XMIT_POLICY_LAYER23	2 /* layer 2+3 (IP ^ MAC) */
+
+typedef struct ifbond {
+	__s32 bond_mode;
+	__s32 num_slaves;
+	__s32 miimon;
+} ifbond;
+
+typedef struct ifslave {
+	__s32 slave_id; /* Used as an IN param to the BOND_SLAVE_INFO_QUERY ioctl */
+	char slave_name[IFNAMSIZ];
+	__s8 link;
+	__s8 state;
+	__u32  link_failure_count;
+} ifslave;
+
+struct ad_info {
+	__u16 aggregator_id;
+	__u16 ports;
+	__u16 actor_key;
+	__u16 partner_key;
+	__u8 partner_system[ETH_ALEN];
+};
+
+#endif /* _LINUX_IF_BONDING_H */
+
+/*
+ * Local variables:
+ *  version-control: t
+ *  kept-new-versions: 5
+ *  c-indent-level: 8
+ *  c-basic-offset: 8
+ *  tab-width: 8
+ * End:
+ */
+
diff --git a/include/linux/if_bridge.h b/include/linux/if_bridge.h
new file mode 100644
index 00000000..dd3f2013
--- /dev/null
+++ b/include/linux/if_bridge.h
@@ -0,0 +1,111 @@
+/*
+ *	Linux ethernet bridge
+ *
+ *	Authors:
+ *	Lennert Buytenhek		<buytenh@gnu.org>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_IF_BRIDGE_H
+#define _LINUX_IF_BRIDGE_H
+
+#include <linux/types.h>
+
+#define SYSFS_BRIDGE_ATTR	"bridge"
+#define SYSFS_BRIDGE_FDB	"brforward"
+#define SYSFS_BRIDGE_PORT_SUBDIR "brif"
+#define SYSFS_BRIDGE_PORT_ATTR	"brport"
+#define SYSFS_BRIDGE_PORT_LINK	"bridge"
+
+#define BRCTL_VERSION 1
+
+#define BRCTL_GET_VERSION 0
+#define BRCTL_GET_BRIDGES 1
+#define BRCTL_ADD_BRIDGE 2
+#define BRCTL_DEL_BRIDGE 3
+#define BRCTL_ADD_IF 4
+#define BRCTL_DEL_IF 5
+#define BRCTL_GET_BRIDGE_INFO 6
+#define BRCTL_GET_PORT_LIST 7
+#define BRCTL_SET_BRIDGE_FORWARD_DELAY 8
+#define BRCTL_SET_BRIDGE_HELLO_TIME 9
+#define BRCTL_SET_BRIDGE_MAX_AGE 10
+#define BRCTL_SET_AGEING_TIME 11
+#define BRCTL_SET_GC_INTERVAL 12
+#define BRCTL_GET_PORT_INFO 13
+#define BRCTL_SET_BRIDGE_STP_STATE 14
+#define BRCTL_SET_BRIDGE_PRIORITY 15
+#define BRCTL_SET_PORT_PRIORITY 16
+#define BRCTL_SET_PATH_COST 17
+#define BRCTL_GET_FDB_ENTRIES 18
+
+#define BR_STATE_DISABLED 0
+#define BR_STATE_LISTENING 1
+#define BR_STATE_LEARNING 2
+#define BR_STATE_FORWARDING 3
+#define BR_STATE_BLOCKING 4
+
+struct __bridge_info {
+	__u64 designated_root;
+	__u64 bridge_id;
+	__u32 root_path_cost;
+	__u32 max_age;
+	__u32 hello_time;
+	__u32 forward_delay;
+	__u32 bridge_max_age;
+	__u32 bridge_hello_time;
+	__u32 bridge_forward_delay;
+	__u8 topology_change;
+	__u8 topology_change_detected;
+	__u8 root_port;
+	__u8 stp_enabled;
+	__u32 ageing_time;
+	__u32 gc_interval;
+	__u32 hello_timer_value;
+	__u32 tcn_timer_value;
+	__u32 topology_change_timer_value;
+	__u32 gc_timer_value;
+};
+
+struct __port_info {
+	__u64 designated_root;
+	__u64 designated_bridge;
+	__u16 port_id;
+	__u16 designated_port;
+	__u32 path_cost;
+	__u32 designated_cost;
+	__u8 state;
+	__u8 top_change_ack;
+	__u8 config_pending;
+	__u8 unused0;
+	__u32 message_age_timer_value;
+	__u32 forward_delay_timer_value;
+	__u32 hold_timer_value;
+};
+
+struct __fdb_entry {
+	__u8 mac_addr[6];
+	__u8 port_no;
+	__u8 is_local;
+	__u32 ageing_timer_value;
+	__u8 port_hi;
+	__u8 pad0;
+	__u16 unused;
+};
+
+#ifdef __KERNEL__
+
+#include <linux/netdevice.h>
+
+extern void brioctl_set(int (*ioctl_hook)(struct net *, unsigned int, void __user *));
+
+typedef int br_should_route_hook_t(struct sk_buff *skb);
+extern br_should_route_hook_t __rcu *br_should_route_hook;
+
+#endif
+
+#endif
diff --git a/include/linux/if_cablemodem.h b/include/linux/if_cablemodem.h
new file mode 100644
index 00000000..9ca1007e
--- /dev/null
+++ b/include/linux/if_cablemodem.h
@@ -0,0 +1,22 @@
+#ifndef _LINUX_CABLEMODEM_H_
+#define _LINUX_CABLEMODEM_H_
+/*
+ *		Author: Franco Venturi <fventuri@mediaone.net>
+ *		Copyright 1998 Franco Venturi
+ *
+ *		This program is free software; you can redistribute it
+ *		and/or  modify it under  the terms of  the GNU General
+ *		Public  License as  published  by  the  Free  Software
+ *		Foundation;  either  version 2 of the License, or  (at
+ *		your option) any later version.
+ */
+
+/* some useful defines for sb1000.c e cmconfig.c - fv */
+#define SIOCGCMSTATS		SIOCDEVPRIVATE+0	/* get cable modem stats */
+#define SIOCGCMFIRMWARE		SIOCDEVPRIVATE+1	/* get cm firmware version */
+#define SIOCGCMFREQUENCY	SIOCDEVPRIVATE+2	/* get cable modem frequency */
+#define SIOCSCMFREQUENCY	SIOCDEVPRIVATE+3	/* set cable modem frequency */
+#define SIOCGCMPIDS			SIOCDEVPRIVATE+4	/* get cable modem PIDs */
+#define SIOCSCMPIDS			SIOCDEVPRIVATE+5	/* set cable modem PIDs */
+
+#endif
diff --git a/include/linux/if_ec.h b/include/linux/if_ec.h
new file mode 100644
index 00000000..d85f9f48
--- /dev/null
+++ b/include/linux/if_ec.h
@@ -0,0 +1,68 @@
+/* Definitions for Econet sockets. */
+
+#ifndef __LINUX_IF_EC
+#define __LINUX_IF_EC
+
+/* User visible stuff. Glibc provides its own but libc5 folk will use these */
+
+struct ec_addr {
+  unsigned char station;		/* Station number.  */
+  unsigned char net;			/* Network number.  */
+};
+
+struct sockaddr_ec {
+  unsigned short sec_family;
+  unsigned char port;			/* Port number.  */
+  unsigned char cb;			/* Control/flag byte.  */
+  unsigned char type;			/* Type of message.  */
+  struct ec_addr addr;
+  unsigned long cookie;
+};
+
+#define ECTYPE_PACKET_RECEIVED		0	/* Packet received */
+#define ECTYPE_TRANSMIT_STATUS		0x10	/* Transmit completed, 
+						   low nibble holds status */
+
+#define ECTYPE_TRANSMIT_OK		1
+#define ECTYPE_TRANSMIT_NOT_LISTENING	2
+#define ECTYPE_TRANSMIT_NET_ERROR	3
+#define ECTYPE_TRANSMIT_NO_CLOCK	4
+#define ECTYPE_TRANSMIT_LINE_JAMMED	5
+#define ECTYPE_TRANSMIT_NOT_PRESENT	6
+
+#ifdef __KERNEL__
+
+#define EC_HLEN				6
+
+/* This is what an Econet frame looks like on the wire. */
+struct ec_framehdr {
+  unsigned char dst_stn;
+  unsigned char dst_net;
+  unsigned char src_stn;
+  unsigned char src_net;
+  unsigned char cb;
+  unsigned char port;
+};
+
+struct econet_sock {
+  /* struct sock has to be the first member of econet_sock */
+  struct sock	sk;
+  unsigned char cb;
+  unsigned char port;
+  unsigned char station;
+  unsigned char net;
+  unsigned short num;
+};
+
+static inline struct econet_sock *ec_sk(const struct sock *sk)
+{
+	return (struct econet_sock *)sk;
+}
+
+struct ec_device {
+  unsigned char station, net;		/* Econet protocol address */
+};
+
+#endif
+
+#endif
diff --git a/include/linux/if_eql.h b/include/linux/if_eql.h
new file mode 100644
index 00000000..18a5d02a
--- /dev/null
+++ b/include/linux/if_eql.h
@@ -0,0 +1,83 @@
+/*
+ * Equalizer Load-balancer for serial network interfaces.
+ *
+ * (c) Copyright 1995 Simon "Guru Aleph-Null" Janes
+ * NCM: Network and Communications Management, Inc.
+ *
+ *
+ *	This software may be used and distributed according to the terms
+ *	of the GNU General Public License, incorporated herein by reference.
+ * 
+ * The author may be reached as simon@ncm.com, or C/O
+ *    NCM
+ *    Attn: Simon Janes
+ *    6803 Whittier Ave
+ *    McLean VA 22101
+ *    Phone: 1-703-847-0040 ext 103
+ */
+
+#ifndef _LINUX_IF_EQL_H
+#define _LINUX_IF_EQL_H
+
+#define EQL_DEFAULT_SLAVE_PRIORITY 28800
+#define EQL_DEFAULT_MAX_SLAVES     4
+#define EQL_DEFAULT_MTU            576
+#define EQL_DEFAULT_RESCHED_IVAL   HZ
+
+#define EQL_ENSLAVE     (SIOCDEVPRIVATE)
+#define EQL_EMANCIPATE  (SIOCDEVPRIVATE + 1)
+
+#define EQL_GETSLAVECFG (SIOCDEVPRIVATE + 2)
+#define EQL_SETSLAVECFG (SIOCDEVPRIVATE + 3)
+
+#define EQL_GETMASTRCFG (SIOCDEVPRIVATE + 4)
+#define EQL_SETMASTRCFG (SIOCDEVPRIVATE + 5)
+
+#ifdef __KERNEL__
+
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+
+typedef struct slave {
+	struct list_head	list;
+	struct net_device	*dev;
+	long			priority;
+	long			priority_bps;
+	long			priority_Bps;
+	long			bytes_queued;
+} slave_t;
+
+typedef struct slave_queue {
+	spinlock_t		lock;
+	struct list_head	all_slaves;
+	int			num_slaves;
+	struct net_device	*master_dev;
+} slave_queue_t;
+
+typedef struct equalizer {
+	slave_queue_t		queue;
+	int			min_slaves;
+	int			max_slaves;
+	struct timer_list	timer;
+} equalizer_t;  
+
+#endif /* __KERNEL__ */
+
+typedef struct master_config {
+	char	master_name[16];
+	int	max_slaves;
+	int	min_slaves;
+} master_config_t;
+
+typedef struct slave_config {
+	char	slave_name[16];
+	long	priority;
+} slave_config_t;
+
+typedef struct slaving_request {
+	char	slave_name[16];
+	long	priority;
+} slaving_request_t;
+
+
+#endif /* _LINUX_EQL_H */
diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
new file mode 100644
index 00000000..56d907a2
--- /dev/null
+++ b/include/linux/if_ether.h
@@ -0,0 +1,148 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the Ethernet IEEE 802.3 interface.
+ *
+ * Version:	@(#)if_ether.h	1.0.1a	02/08/94
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Donald Becker, <becker@super.org>
+ *		Alan Cox, <alan@lxorguk.ukuu.org.uk>
+ *		Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_IF_ETHER_H
+#define _LINUX_IF_ETHER_H
+
+#include <linux/types.h>
+
+/*
+ *	IEEE 802.3 Ethernet magic constants.  The frame sizes omit the preamble
+ *	and FCS/CRC (frame check sequence).
+ */
+
+#define ETH_ALEN	6		/* Octets in one ethernet addr	 */
+#define ETH_HLEN	14		/* Total octets in header.	 */
+#define ETH_ZLEN	60		/* Min. octets in frame sans FCS */
+#define ETH_DATA_LEN	1500		/* Max. octets in payload	 */
+#define ETH_FRAME_LEN	1514		/* Max. octets in frame sans FCS */
+#define ETH_FCS_LEN	4		/* Octets in the FCS		 */
+
+/*
+ *	These are the defined Ethernet Protocol ID's.
+ */
+
+#define ETH_P_LOOP	0x0060		/* Ethernet Loopback packet	*/
+#define ETH_P_PUP	0x0200		/* Xerox PUP packet		*/
+#define ETH_P_PUPAT	0x0201		/* Xerox PUP Addr Trans packet	*/
+#define ETH_P_IP	0x0800		/* Internet Protocol packet	*/
+#define ETH_P_X25	0x0805		/* CCITT X.25			*/
+#define ETH_P_ARP	0x0806		/* Address Resolution packet	*/
+#define	ETH_P_BPQ	0x08FF		/* G8BPQ AX.25 Ethernet Packet	[ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_IEEEPUP	0x0a00		/* Xerox IEEE802.3 PUP packet */
+#define ETH_P_IEEEPUPAT	0x0a01		/* Xerox IEEE802.3 PUP Addr Trans packet */
+#define ETH_P_DEC       0x6000          /* DEC Assigned proto           */
+#define ETH_P_DNA_DL    0x6001          /* DEC DNA Dump/Load            */
+#define ETH_P_DNA_RC    0x6002          /* DEC DNA Remote Console       */
+#define ETH_P_DNA_RT    0x6003          /* DEC DNA Routing              */
+#define ETH_P_LAT       0x6004          /* DEC LAT                      */
+#define ETH_P_DIAG      0x6005          /* DEC Diagnostics              */
+#define ETH_P_CUST      0x6006          /* DEC Customer use             */
+#define ETH_P_SCA       0x6007          /* DEC Systems Comms Arch       */
+#define ETH_P_TEB	0x6558		/* Trans Ether Bridging		*/
+#define ETH_P_RARP      0x8035		/* Reverse Addr Res packet	*/
+#define ETH_P_ATALK	0x809B		/* Appletalk DDP		*/
+#define ETH_P_AARP	0x80F3		/* Appletalk AARP		*/
+#define ETH_P_8021Q	0x8100          /* 802.1Q VLAN Extended Header  */
+#define ETH_P_IPX	0x8137		/* IPX over DIX			*/
+#define ETH_P_IPV6	0x86DD		/* IPv6 over bluebook		*/
+#define ETH_P_PAUSE	0x8808		/* IEEE Pause frames. See 802.3 31B */
+#define ETH_P_SLOW	0x8809		/* Slow Protocol. See 802.3ad 43B */
+#define ETH_P_WCCP	0x883E		/* Web-cache coordination protocol
+					 * defined in draft-wilson-wrec-wccp-v2-00.txt */
+#define ETH_P_PPP_DISC	0x8863		/* PPPoE discovery messages     */
+#define ETH_P_PPP_SES	0x8864		/* PPPoE session messages	*/
+#define ETH_P_MPLS_UC	0x8847		/* MPLS Unicast traffic		*/
+#define ETH_P_MPLS_MC	0x8848		/* MPLS Multicast traffic	*/
+#define ETH_P_ATMMPOA	0x884c		/* MultiProtocol Over ATM	*/
+#define ETH_P_LINK_CTL	0x886c		/* HPNA, wlan link local tunnel */
+#define ETH_P_ATMFATE	0x8884		/* Frame-based ATM Transport
+					 * over Ethernet
+					 */
+#define ETH_P_PAE	0x888E		/* Port Access Entity (IEEE 802.1X) */
+#define ETH_P_AOE	0x88A2		/* ATA over Ethernet		*/
+#define ETH_P_8021AD	0x88A8          /* 802.1ad Service VLAN		*/
+#define ETH_P_802_EX1	0x88B5		/* 802.1 Local Experimental 1.  */
+#define ETH_P_TIPC	0x88CA		/* TIPC 			*/
+#define ETH_P_8021AH	0x88E7          /* 802.1ah Backbone Service Tag */
+#define ETH_P_1588	0x88F7		/* IEEE 1588 Timesync */
+#define ETH_P_FCOE	0x8906		/* Fibre Channel over Ethernet  */
+#define ETH_P_TDLS	0x890D          /* TDLS */
+#define ETH_P_FIP	0x8914		/* FCoE Initialization Protocol */
+#define ETH_P_QINQ1	0x9100		/* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_QINQ2	0x9200		/* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_QINQ3	0x9300		/* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_EDSA	0xDADA		/* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_AF_IUCV   0xFBFB		/* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */
+
+/*
+ *	Non DIX types. Won't clash for 1500 types.
+ */
+
+#define ETH_P_802_3	0x0001		/* Dummy type for 802.3 frames  */
+#define ETH_P_AX25	0x0002		/* Dummy protocol id for AX.25  */
+#define ETH_P_ALL	0x0003		/* Every packet (be careful!!!) */
+#define ETH_P_802_2	0x0004		/* 802.2 frames 		*/
+#define ETH_P_SNAP	0x0005		/* Internal only		*/
+#define ETH_P_DDCMP     0x0006          /* DEC DDCMP: Internal only     */
+#define ETH_P_WAN_PPP   0x0007          /* Dummy type for WAN PPP frames*/
+#define ETH_P_PPP_MP    0x0008          /* Dummy type for PPP MP frames */
+#define ETH_P_LOCALTALK 0x0009		/* Localtalk pseudo type 	*/
+#define ETH_P_CAN	0x000C		/* Controller Area Network      */
+#define ETH_P_PPPTALK	0x0010		/* Dummy type for Atalk over PPP*/
+#define ETH_P_TR_802_2	0x0011		/* 802.2 frames 		*/
+#define ETH_P_MOBITEX	0x0015		/* Mobitex (kaz@cafe.net)	*/
+#define ETH_P_CONTROL	0x0016		/* Card specific control frames */
+#define ETH_P_IRDA	0x0017		/* Linux-IrDA			*/
+#define ETH_P_ECONET	0x0018		/* Acorn Econet			*/
+#define ETH_P_HDLC	0x0019		/* HDLC frames			*/
+#define ETH_P_ARCNET	0x001A		/* 1A for ArcNet :-)            */
+#define ETH_P_DSA	0x001B		/* Distributed Switch Arch.	*/
+#define ETH_P_TRAILER	0x001C		/* Trailer switch tagging	*/
+#define ETH_P_PHONET	0x00F5		/* Nokia Phonet frames          */
+#define ETH_P_IEEE802154 0x00F6		/* IEEE802.15.4 frame		*/
+#define ETH_P_CAIF	0x00F7		/* ST-Ericsson CAIF protocol	*/
+
+/*
+ *	This is an Ethernet frame header.
+ */
+
+struct ethhdr {
+	unsigned char	h_dest[ETH_ALEN];	/* destination eth addr	*/
+	unsigned char	h_source[ETH_ALEN];	/* source ether addr	*/
+	__be16		h_proto;		/* packet type ID field	*/
+} __attribute__((packed));
+
+#ifdef __KERNEL__
+#include <linux/skbuff.h>
+
+static inline struct ethhdr *eth_hdr(const struct sk_buff *skb)
+{
+	return (struct ethhdr *)skb_mac_header(skb);
+}
+
+int eth_header_parse(const struct sk_buff *skb, unsigned char *haddr);
+
+int mac_pton(const char *s, u8 *mac);
+extern ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len);
+
+#endif
+
+#endif	/* _LINUX_IF_ETHER_H */
diff --git a/include/linux/if_fc.h b/include/linux/if_fc.h
new file mode 100644
index 00000000..6ed7f1bf
--- /dev/null
+++ b/include/linux/if_fc.h
@@ -0,0 +1,51 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for Fibre Channel.
+ *
+ * Version:	@(#)if_fc.h	0.0	11/20/98
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Donald Becker, <becker@super.org>
+ *    Peter De Schrijver, <stud11@cc4.kuleuven.ac.be>
+ *	  Vineet Abraham, <vma@iol.unh.edu>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_IF_FC_H
+#define _LINUX_IF_FC_H
+
+#include <linux/types.h>
+
+#define FC_ALEN	6		/* Octets in one ethernet addr	 */
+#define FC_HLEN   (sizeof(struct fch_hdr)+sizeof(struct fcllc))
+#define FC_ID_LEN 3		/* Octets in a Fibre Channel Address */
+
+/* LLC and SNAP constants */
+#define EXTENDED_SAP 0xAA
+#define UI_CMD       0x03
+
+/* This is NOT the Fibre Channel frame header. The FC frame header is
+ *  constructed in the driver as the Tachyon needs certain fields in
+ *  certains positions. So, it can't be generalized here.*/
+
+struct fch_hdr {
+	__u8  daddr[FC_ALEN];		/* destination address */
+	__u8  saddr[FC_ALEN];		/* source address */
+};
+
+/* This is a Fibre Channel LLC structure */
+struct fcllc {
+	__u8  dsap;			/* destination SAP */
+	__u8  ssap;			/* source SAP */
+	__u8  llc;			/* LLC control field */
+	__u8  protid[3];		/* protocol id */
+	__be16 ethertype;		/* ether type field */
+};
+
+#endif	/* _LINUX_IF_FC_H */
diff --git a/include/linux/if_fddi.h b/include/linux/if_fddi.h
new file mode 100644
index 00000000..e6dc11e7
--- /dev/null
+++ b/include/linux/if_fddi.h
@@ -0,0 +1,199 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the ANSI FDDI interface.
+ *
+ * Version:	@(#)if_fddi.h	1.0.2	Sep 29 2004
+ *
+ * Author:	Lawrence V. Stefani, <stefani@lkg.dec.com>
+ *
+ *		if_fddi.h is based on previous if_ether.h and if_tr.h work by
+ *			Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *			Donald Becker, <becker@super.org>
+ *			Alan Cox, <alan@lxorguk.ukuu.org.uk>
+ *			Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk>
+ *			Peter De Schrijver, <stud11@cc4.kuleuven.ac.be>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_IF_FDDI_H
+#define _LINUX_IF_FDDI_H
+
+#include <linux/types.h>
+
+/*
+ *  Define max and min legal sizes.  The frame sizes do not include
+ *  4 byte FCS/CRC (frame check sequence).
+ */
+#define FDDI_K_ALEN			6		/* Octets in one FDDI address */
+#define FDDI_K_8022_HLEN	16		/* Total octets in 802.2 header */
+#define FDDI_K_SNAP_HLEN	21		/* Total octets in 802.2 SNAP header */
+#define FDDI_K_8022_ZLEN	16		/* Min octets in 802.2 frame sans FCS */
+#define FDDI_K_SNAP_ZLEN	21		/* Min octets in 802.2 SNAP frame sans FCS */
+#define FDDI_K_8022_DLEN	4475	/* Max octets in 802.2 payload */
+#define FDDI_K_SNAP_DLEN	4470	/* Max octets in 802.2 SNAP payload */
+#define FDDI_K_LLC_ZLEN		13		/* Min octets in LLC frame sans FCS */
+#define FDDI_K_LLC_LEN		4491	/* Max octets in LLC frame sans FCS */
+
+/* Define FDDI Frame Control (FC) Byte values */
+#define FDDI_FC_K_VOID					0x00	
+#define FDDI_FC_K_NON_RESTRICTED_TOKEN	0x80	
+#define FDDI_FC_K_RESTRICTED_TOKEN		0xC0	
+#define FDDI_FC_K_SMT_MIN				0x41
+#define FDDI_FC_K_SMT_MAX		   		0x4F
+#define FDDI_FC_K_MAC_MIN				0xC1
+#define FDDI_FC_K_MAC_MAX		  		0xCF	
+#define FDDI_FC_K_ASYNC_LLC_MIN			0x50
+#define FDDI_FC_K_ASYNC_LLC_DEF			0x54
+#define FDDI_FC_K_ASYNC_LLC_MAX			0x5F
+#define FDDI_FC_K_SYNC_LLC_MIN			0xD0
+#define FDDI_FC_K_SYNC_LLC_MAX			0xD7
+#define FDDI_FC_K_IMPLEMENTOR_MIN		0x60
+#define FDDI_FC_K_IMPLEMENTOR_MAX  		0x6F
+#define FDDI_FC_K_RESERVED_MIN			0x70
+#define FDDI_FC_K_RESERVED_MAX			0x7F
+
+/* Define LLC and SNAP constants */
+#define FDDI_EXTENDED_SAP	0xAA
+#define FDDI_UI_CMD			0x03
+
+/* Define 802.2 Type 1 header */
+struct fddi_8022_1_hdr {
+	__u8	dsap;					/* destination service access point */
+	__u8	ssap;					/* source service access point */
+	__u8	ctrl;					/* control byte #1 */
+} __attribute__((packed));
+
+/* Define 802.2 Type 2 header */
+struct fddi_8022_2_hdr {
+	__u8	dsap;					/* destination service access point */
+	__u8	ssap;					/* source service access point */
+	__u8	ctrl_1;					/* control byte #1 */
+	__u8	ctrl_2;					/* control byte #2 */
+} __attribute__((packed));
+
+/* Define 802.2 SNAP header */
+#define FDDI_K_OUI_LEN	3
+struct fddi_snap_hdr {
+	__u8	dsap;					/* always 0xAA */
+	__u8	ssap;					/* always 0xAA */
+	__u8	ctrl;					/* always 0x03 */
+	__u8	oui[FDDI_K_OUI_LEN];	/* organizational universal id */
+	__be16	ethertype;				/* packet type ID field */
+} __attribute__((packed));
+
+/* Define FDDI LLC frame header */
+struct fddihdr {
+	__u8	fc;						/* frame control */
+	__u8	daddr[FDDI_K_ALEN];		/* destination address */
+	__u8	saddr[FDDI_K_ALEN];		/* source address */
+	union
+		{
+		struct fddi_8022_1_hdr		llc_8022_1;
+		struct fddi_8022_2_hdr		llc_8022_2;
+		struct fddi_snap_hdr		llc_snap;
+		} hdr;
+} __attribute__((packed));
+
+#ifdef __KERNEL__
+#include <linux/netdevice.h>
+
+/* Define FDDI statistics structure */
+struct fddi_statistics {
+
+	/* Generic statistics. */
+
+	struct net_device_stats gen;
+
+	/* Detailed FDDI statistics.  Adopted from RFC 1512 */
+
+	__u8	smt_station_id[8];
+	__u32	smt_op_version_id;
+	__u32	smt_hi_version_id;
+	__u32	smt_lo_version_id;
+	__u8	smt_user_data[32];
+	__u32	smt_mib_version_id;
+	__u32	smt_mac_cts;
+	__u32	smt_non_master_cts;
+	__u32	smt_master_cts;
+	__u32	smt_available_paths;
+	__u32	smt_config_capabilities;
+	__u32	smt_config_policy;
+	__u32	smt_connection_policy;
+	__u32	smt_t_notify;
+	__u32	smt_stat_rpt_policy;
+	__u32	smt_trace_max_expiration;
+	__u32	smt_bypass_present;
+	__u32	smt_ecm_state;
+	__u32	smt_cf_state;
+	__u32	smt_remote_disconnect_flag;
+	__u32	smt_station_status;
+	__u32	smt_peer_wrap_flag;
+	__u32	smt_time_stamp;
+	__u32	smt_transition_time_stamp;
+	__u32	mac_frame_status_functions;
+	__u32	mac_t_max_capability;
+	__u32	mac_tvx_capability;
+	__u32	mac_available_paths;
+	__u32	mac_current_path;
+	__u8	mac_upstream_nbr[FDDI_K_ALEN];
+	__u8	mac_downstream_nbr[FDDI_K_ALEN];
+	__u8	mac_old_upstream_nbr[FDDI_K_ALEN];
+	__u8	mac_old_downstream_nbr[FDDI_K_ALEN];
+	__u32	mac_dup_address_test;
+	__u32	mac_requested_paths;
+	__u32	mac_downstream_port_type;
+	__u8	mac_smt_address[FDDI_K_ALEN];
+	__u32	mac_t_req;
+	__u32	mac_t_neg;
+	__u32	mac_t_max;
+	__u32	mac_tvx_value;
+	__u32	mac_frame_cts;
+	__u32	mac_copied_cts;
+	__u32	mac_transmit_cts;
+	__u32	mac_error_cts;
+	__u32	mac_lost_cts;
+	__u32	mac_frame_error_threshold;
+	__u32	mac_frame_error_ratio;
+	__u32	mac_rmt_state;
+	__u32	mac_da_flag;
+	__u32	mac_una_da_flag;
+	__u32	mac_frame_error_flag;
+	__u32	mac_ma_unitdata_available;
+	__u32	mac_hardware_present;
+	__u32	mac_ma_unitdata_enable;
+	__u32	path_tvx_lower_bound;
+	__u32	path_t_max_lower_bound;
+	__u32	path_max_t_req;
+	__u32	path_configuration[8];
+	__u32	port_my_type[2];
+	__u32	port_neighbor_type[2];
+	__u32	port_connection_policies[2];
+	__u32	port_mac_indicated[2];
+	__u32	port_current_path[2];
+	__u8	port_requested_paths[3*2];
+	__u32	port_mac_placement[2];
+	__u32	port_available_paths[2];
+	__u32	port_pmd_class[2];
+	__u32	port_connection_capabilities[2];
+	__u32	port_bs_flag[2];
+	__u32	port_lct_fail_cts[2];
+	__u32	port_ler_estimate[2];
+	__u32	port_lem_reject_cts[2];
+	__u32	port_lem_cts[2];
+	__u32	port_ler_cutoff[2];
+	__u32	port_ler_alarm[2];
+	__u32	port_connect_state[2];
+	__u32	port_pcm_state[2];
+	__u32	port_pc_withhold[2];
+	__u32	port_ler_flag[2];
+	__u32	port_hardware_present[2];
+};
+#endif /* __KERNEL__ */
+
+#endif	/* _LINUX_IF_FDDI_H */
diff --git a/include/linux/if_frad.h b/include/linux/if_frad.h
new file mode 100644
index 00000000..191ee086
--- /dev/null
+++ b/include/linux/if_frad.h
@@ -0,0 +1,193 @@
+/*
+ * DLCI/FRAD	Definitions for Frame Relay Access Devices.  DLCI devices are
+ *		created for each DLCI associated with a FRAD.  The FRAD driver
+ *		is not truly a network device, but the lower level device
+ *		handler.  This allows other FRAD manufacturers to use the DLCI
+ *		code, including its RFC1490 encapsulation alongside the current
+ *		implementation for the Sangoma cards.
+ *
+ * Version:	@(#)if_ifrad.h	0.15	31 Mar 96
+ *
+ * Author:	Mike McLagan <mike.mclagan@linux.org>
+ *
+ * Changes:
+ *		0.15	Mike McLagan	changed structure defs (packed)
+ *					re-arranged flags
+ *					added DLCI_RET vars
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _FRAD_H_
+#define _FRAD_H_
+
+#include <linux/if.h>
+
+/* Structures and constants associated with the DLCI device driver */
+
+struct dlci_add
+{
+   char  devname[IFNAMSIZ];
+   short dlci;
+};
+
+#define DLCI_GET_CONF	(SIOCDEVPRIVATE + 2)
+#define DLCI_SET_CONF	(SIOCDEVPRIVATE + 3)
+
+/* 
+ * These are related to the Sangoma SDLA and should remain in order. 
+ * Code within the SDLA module is based on the specifics of this 
+ * structure.  Change at your own peril.
+ */
+struct dlci_conf {
+   short flags;
+   short CIR_fwd;
+   short Bc_fwd;
+   short Be_fwd;
+   short CIR_bwd;
+   short Bc_bwd;
+   short Be_bwd; 
+
+/* these are part of the status read */
+   short Tc_fwd;
+   short Tc_bwd;
+   short Tf_max;
+   short Tb_max;
+
+/* add any new fields here above is a mirror of sdla_dlci_conf */
+};
+
+#define DLCI_GET_SLAVE	(SIOCDEVPRIVATE + 4)
+
+/* configuration flags for DLCI */
+#define DLCI_IGNORE_CIR_OUT	0x0001
+#define DLCI_ACCOUNT_CIR_IN	0x0002
+#define DLCI_BUFFER_IF		0x0008
+
+#define DLCI_VALID_FLAGS	0x000B
+
+/* defines for the actual Frame Relay hardware */
+#define FRAD_GET_CONF	(SIOCDEVPRIVATE)
+#define FRAD_SET_CONF	(SIOCDEVPRIVATE + 1)
+
+#define FRAD_LAST_IOCTL	FRAD_SET_CONF
+
+/*
+ * Based on the setup for the Sangoma SDLA.  If changes are 
+ * necessary to this structure, a routine will need to be 
+ * added to that module to copy fields.
+ */
+struct frad_conf 
+{
+   short station;
+   short flags;
+   short kbaud;
+   short clocking;
+   short mtu;
+   short T391;
+   short T392;
+   short N391;
+   short N392;
+   short N393;
+   short CIR_fwd;
+   short Bc_fwd;
+   short Be_fwd;
+   short CIR_bwd;
+   short Bc_bwd;
+   short Be_bwd;
+
+/* Add new fields here, above is a mirror of the sdla_conf */
+
+};
+
+#define FRAD_STATION_CPE	0x0000
+#define FRAD_STATION_NODE	0x0001
+
+#define FRAD_TX_IGNORE_CIR	0x0001
+#define FRAD_RX_ACCOUNT_CIR	0x0002
+#define FRAD_DROP_ABORTED	0x0004
+#define FRAD_BUFFERIF		0x0008
+#define FRAD_STATS		0x0010
+#define FRAD_MCI		0x0100
+#define FRAD_AUTODLCI		0x8000
+#define FRAD_VALID_FLAGS	0x811F
+
+#define FRAD_CLOCK_INT		0x0001
+#define FRAD_CLOCK_EXT		0x0000
+
+#ifdef __KERNEL__
+
+#if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE)
+
+/* these are the fields of an RFC 1490 header */
+struct frhdr
+{
+   unsigned char  control;
+
+   /* for IP packets, this can be the NLPID */
+   unsigned char  pad;
+
+   unsigned char  NLPID;
+   unsigned char  OUI[3];
+   __be16 PID;
+
+#define IP_NLPID pad 
+} __packed;
+
+/* see RFC 1490 for the definition of the following */
+#define FRAD_I_UI		0x03
+
+#define FRAD_P_PADDING		0x00
+#define FRAD_P_Q933		0x08
+#define FRAD_P_SNAP		0x80
+#define FRAD_P_CLNP		0x81
+#define FRAD_P_IP		0xCC
+
+struct dlci_local
+{
+   struct net_device      *master;
+   struct net_device      *slave;
+   struct dlci_conf       config;
+   int                    configured;
+   struct list_head	  list;
+
+   /* callback function */
+   void              (*receive)(struct sk_buff *skb, struct net_device *);
+};
+
+struct frad_local
+{
+   struct net_device_stats stats;
+
+   /* devices which this FRAD is slaved to */
+   struct net_device     *master[CONFIG_DLCI_MAX];
+   short             dlci[CONFIG_DLCI_MAX];
+
+   struct frad_conf  config;
+   int               configured;	/* has this device been configured */
+   int               initialized;	/* mem_start, port, irq set ? */
+
+   /* callback functions */
+   int               (*activate)(struct net_device *, struct net_device *);
+   int               (*deactivate)(struct net_device *, struct net_device *);
+   int               (*assoc)(struct net_device *, struct net_device *);
+   int               (*deassoc)(struct net_device *, struct net_device *);
+   int               (*dlci_conf)(struct net_device *, struct net_device *, int get);
+
+   /* fields that are used by the Sangoma SDLA cards */
+   struct timer_list timer;
+   int               type;		/* adapter type */
+   int               state;		/* state of the S502/8 control latch */
+   int               buffer;		/* current buffer for S508 firmware */
+};
+
+#endif /* CONFIG_DLCI || CONFIG_DLCI_MODULE */
+
+extern void dlci_ioctl_set(int (*hook)(unsigned int, void __user *));
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/linux/if_hippi.h b/include/linux/if_hippi.h
new file mode 100644
index 00000000..cdc049f1
--- /dev/null
+++ b/include/linux/if_hippi.h
@@ -0,0 +1,153 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the HIPPI interface.
+ *
+ * Version:	@(#)if_hippi.h	1.0.0	05/26/97
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Donald Becker, <becker@super.org>
+ *		Alan Cox, <alan@lxorguk.ukuu.org.uk>
+ *		Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk>
+ *		Jes Sorensen, <Jes.Sorensen@cern.ch>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+ 
+#ifndef _LINUX_IF_HIPPI_H
+#define _LINUX_IF_HIPPI_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/*
+ *	HIPPI magic constants.
+ */
+
+#define HIPPI_ALEN	6		/* Bytes in one HIPPI hw-addr	   */
+#define HIPPI_HLEN	sizeof(struct hippi_hdr)
+#define HIPPI_ZLEN	0		/* Min. bytes in frame without FCS */
+#define HIPPI_DATA_LEN	65280		/* Max. bytes in payload	   */
+#define HIPPI_FRAME_LEN	(HIPPI_DATA_LEN + HIPPI_HLEN)
+					/* Max. bytes in frame without FCS */
+
+/*
+ * Define LLC and SNAP constants.
+ */
+#define HIPPI_EXTENDED_SAP	0xAA
+#define HIPPI_UI_CMD		0x03
+
+
+/*
+ *	Do we need to list some sort of ID's here?
+ */
+
+/*
+ *	HIPPI statistics collection data. 
+ */
+ 
+struct hipnet_statistics {
+	int	rx_packets;		/* total packets received	*/
+	int	tx_packets;		/* total packets transmitted	*/
+	int	rx_errors;		/* bad packets received		*/
+	int	tx_errors;		/* packet transmit problems	*/
+	int	rx_dropped;		/* no space in linux buffers	*/
+	int	tx_dropped;		/* no space available in linux	*/
+
+	/* detailed rx_errors: */
+	int	rx_length_errors;
+	int	rx_over_errors;		/* receiver ring buff overflow	*/
+	int	rx_crc_errors;		/* recved pkt with crc error	*/
+	int	rx_frame_errors;	/* recv'd frame alignment error */
+	int	rx_fifo_errors;		/* recv'r fifo overrun		*/
+	int	rx_missed_errors;	/* receiver missed packet	*/
+
+	/* detailed tx_errors */
+	int	tx_aborted_errors;
+	int	tx_carrier_errors;
+	int	tx_fifo_errors;
+	int	tx_heartbeat_errors;
+	int	tx_window_errors;
+};
+
+
+struct hippi_fp_hdr {
+#if 0
+	__u8		ulp;				/* must contain 4 */
+#if defined (__BIG_ENDIAN_BITFIELD)
+	__u8		d1_data_present:1;		/* must be 1 */
+	__u8		start_d2_burst_boundary:1;	/* must be zero */
+	__u8		reserved:6;			/* must be zero */
+#if 0
+	__u16		reserved1:5;
+	__u16		d1_area_size:8;			/* must be 3 */
+	__u16		d2_offset:3;			/* must be zero */
+#endif
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8		reserved:6;			/* must be zero */
+	__u8	 	start_d2_burst_boundary:1;	/* must be zero */
+	__u8		d1_data_present:1;		/* must be 1 */
+#if 0
+	__u16		d2_offset:3;			/* must be zero */
+	__u16		d1_area_size:8;			/* must be 3 */
+	__u16		reserved1:5;			/* must be zero */
+#endif
+#else
+#error	"Please fix <asm/byteorder.h>"
+#endif
+#else
+	__be32		fixed;
+#endif
+	__be32		d2_size;
+} __attribute__((packed));
+
+struct hippi_le_hdr {
+#if defined (__BIG_ENDIAN_BITFIELD)
+	__u8		fc:3;
+	__u8		double_wide:1;
+	__u8		message_type:4;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8		message_type:4;
+	__u8		double_wide:1;
+	__u8		fc:3;
+#endif
+	__u8		dest_switch_addr[3];
+#if defined (__BIG_ENDIAN_BITFIELD)
+	__u8		dest_addr_type:4,
+			src_addr_type:4;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8		src_addr_type:4,
+			dest_addr_type:4;
+#endif
+	__u8		src_switch_addr[3];
+	__u16		reserved;
+	__u8		daddr[HIPPI_ALEN];
+	__u16		locally_administered;
+	__u8		saddr[HIPPI_ALEN];
+} __attribute__((packed));
+
+#define HIPPI_OUI_LEN	3
+/*
+ * Looks like the dsap and ssap fields have been swapped by mistake in
+ * RFC 2067 "IP over HIPPI".
+ */
+struct hippi_snap_hdr {
+	__u8	dsap;			/* always 0xAA */
+	__u8	ssap;			/* always 0xAA */
+	__u8	ctrl;			/* always 0x03 */
+	__u8	oui[HIPPI_OUI_LEN];	/* organizational universal id (zero)*/
+	__be16	ethertype;		/* packet type ID field */
+} __attribute__((packed));
+
+struct hippi_hdr {
+	struct hippi_fp_hdr	fp;
+	struct hippi_le_hdr	le;
+	struct hippi_snap_hdr	snap;
+} __attribute__((packed));
+
+#endif	/* _LINUX_IF_HIPPI_H */
diff --git a/include/linux/if_infiniband.h b/include/linux/if_infiniband.h
new file mode 100644
index 00000000..7d958475
--- /dev/null
+++ b/include/linux/if_infiniband.h
@@ -0,0 +1,29 @@
+/*
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available at
+ * <http://www.fsf.org/copyleft/gpl.html>, or the OpenIB.org BSD
+ * license, available in the LICENSE.TXT file accompanying this
+ * software.  These details are also available at
+ * <http://www.openfabrics.org/software_license.htm>.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * Copyright (c) 2004 Topspin Communications.  All rights reserved.
+ *
+ * $Id$
+ */
+
+#ifndef _LINUX_IF_INFINIBAND_H
+#define _LINUX_IF_INFINIBAND_H
+
+#define INFINIBAND_ALEN		20	/* Octets in IPoIB HW addr	*/
+
+#endif /* _LINUX_IF_INFINIBAND_H */
diff --git a/include/linux/if_link.h b/include/linux/if_link.h
new file mode 100644
index 00000000..4b24ff45
--- /dev/null
+++ b/include/linux/if_link.h
@@ -0,0 +1,394 @@
+#ifndef _LINUX_IF_LINK_H
+#define _LINUX_IF_LINK_H
+
+#include <linux/types.h>
+#include <linux/netlink.h>
+
+/* This struct should be in sync with struct rtnl_link_stats64 */
+struct rtnl_link_stats {
+	__u32	rx_packets;		/* total packets received	*/
+	__u32	tx_packets;		/* total packets transmitted	*/
+	__u32	rx_bytes;		/* total bytes received 	*/
+	__u32	tx_bytes;		/* total bytes transmitted	*/
+	__u32	rx_errors;		/* bad packets received		*/
+	__u32	tx_errors;		/* packet transmit problems	*/
+	__u32	rx_dropped;		/* no space in linux buffers	*/
+	__u32	tx_dropped;		/* no space available in linux	*/
+	__u32	multicast;		/* multicast packets received	*/
+	__u32	collisions;
+
+	/* detailed rx_errors: */
+	__u32	rx_length_errors;
+	__u32	rx_over_errors;		/* receiver ring buff overflow	*/
+	__u32	rx_crc_errors;		/* recved pkt with crc error	*/
+	__u32	rx_frame_errors;	/* recv'd frame alignment error */
+	__u32	rx_fifo_errors;		/* recv'r fifo overrun		*/
+	__u32	rx_missed_errors;	/* receiver missed packet	*/
+
+	/* detailed tx_errors */
+	__u32	tx_aborted_errors;
+	__u32	tx_carrier_errors;
+	__u32	tx_fifo_errors;
+	__u32	tx_heartbeat_errors;
+	__u32	tx_window_errors;
+
+	/* for cslip etc */
+	__u32	rx_compressed;
+	__u32	tx_compressed;
+};
+
+/* The main device statistics structure */
+struct rtnl_link_stats64 {
+	__u64	rx_packets;		/* total packets received	*/
+	__u64	tx_packets;		/* total packets transmitted	*/
+	__u64	rx_bytes;		/* total bytes received 	*/
+	__u64	tx_bytes;		/* total bytes transmitted	*/
+	__u64	rx_errors;		/* bad packets received		*/
+	__u64	tx_errors;		/* packet transmit problems	*/
+	__u64	rx_dropped;		/* no space in linux buffers	*/
+	__u64	tx_dropped;		/* no space available in linux	*/
+	__u64	multicast;		/* multicast packets received	*/
+	__u64	collisions;
+
+	/* detailed rx_errors: */
+	__u64	rx_length_errors;
+	__u64	rx_over_errors;		/* receiver ring buff overflow	*/
+	__u64	rx_crc_errors;		/* recved pkt with crc error	*/
+	__u64	rx_frame_errors;	/* recv'd frame alignment error */
+	__u64	rx_fifo_errors;		/* recv'r fifo overrun		*/
+	__u64	rx_missed_errors;	/* receiver missed packet	*/
+
+	/* detailed tx_errors */
+	__u64	tx_aborted_errors;
+	__u64	tx_carrier_errors;
+	__u64	tx_fifo_errors;
+	__u64	tx_heartbeat_errors;
+	__u64	tx_window_errors;
+
+	/* for cslip etc */
+	__u64	rx_compressed;
+	__u64	tx_compressed;
+};
+
+/* The struct should be in sync with struct ifmap */
+struct rtnl_link_ifmap {
+	__u64	mem_start;
+	__u64	mem_end;
+	__u64	base_addr;
+	__u16	irq;
+	__u8	dma;
+	__u8	port;
+};
+
+/*
+ * IFLA_AF_SPEC
+ *   Contains nested attributes for address family specific attributes.
+ *   Each address family may create a attribute with the address family
+ *   number as type and create its own attribute structure in it.
+ *
+ *   Example:
+ *   [IFLA_AF_SPEC] = {
+ *       [AF_INET] = {
+ *           [IFLA_INET_CONF] = ...,
+ *       },
+ *       [AF_INET6] = {
+ *           [IFLA_INET6_FLAGS] = ...,
+ *           [IFLA_INET6_CONF] = ...,
+ *       }
+ *   }
+ */
+
+enum {
+	IFLA_UNSPEC,
+	IFLA_ADDRESS,
+	IFLA_BROADCAST,
+	IFLA_IFNAME,
+	IFLA_MTU,
+	IFLA_LINK,
+	IFLA_QDISC,
+	IFLA_STATS,
+	IFLA_COST,
+#define IFLA_COST IFLA_COST
+	IFLA_PRIORITY,
+#define IFLA_PRIORITY IFLA_PRIORITY
+	IFLA_MASTER,
+#define IFLA_MASTER IFLA_MASTER
+	IFLA_WIRELESS,		/* Wireless Extension event - see wireless.h */
+#define IFLA_WIRELESS IFLA_WIRELESS
+	IFLA_PROTINFO,		/* Protocol specific information for a link */
+#define IFLA_PROTINFO IFLA_PROTINFO
+	IFLA_TXQLEN,
+#define IFLA_TXQLEN IFLA_TXQLEN
+	IFLA_MAP,
+#define IFLA_MAP IFLA_MAP
+	IFLA_WEIGHT,
+#define IFLA_WEIGHT IFLA_WEIGHT
+	IFLA_OPERSTATE,
+	IFLA_LINKMODE,
+	IFLA_LINKINFO,
+#define IFLA_LINKINFO IFLA_LINKINFO
+	IFLA_NET_NS_PID,
+	IFLA_IFALIAS,
+	IFLA_NUM_VF,		/* Number of VFs if device is SR-IOV PF */
+	IFLA_VFINFO_LIST,
+	IFLA_STATS64,
+	IFLA_VF_PORTS,
+	IFLA_PORT_SELF,
+	IFLA_AF_SPEC,
+	IFLA_GROUP,		/* Group the device belongs to */
+	IFLA_NET_NS_FD,
+	IFLA_EXT_MASK,		/* Extended info mask, VFs, etc */
+	__IFLA_MAX
+};
+
+
+#define IFLA_MAX (__IFLA_MAX - 1)
+
+/* backwards compatibility for userspace */
+#ifndef __KERNEL__
+#define IFLA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifinfomsg))))
+#define IFLA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifinfomsg))
+#endif
+
+enum {
+	IFLA_INET_UNSPEC,
+	IFLA_INET_CONF,
+	__IFLA_INET_MAX,
+};
+
+#define IFLA_INET_MAX (__IFLA_INET_MAX - 1)
+
+/* ifi_flags.
+
+   IFF_* flags.
+
+   The only change is:
+   IFF_LOOPBACK, IFF_BROADCAST and IFF_POINTOPOINT are
+   more not changeable by user. They describe link media
+   characteristics and set by device driver.
+
+   Comments:
+   - Combination IFF_BROADCAST|IFF_POINTOPOINT is invalid
+   - If neither of these three flags are set;
+     the interface is NBMA.
+
+   - IFF_MULTICAST does not mean anything special:
+   multicasts can be used on all not-NBMA links.
+   IFF_MULTICAST means that this media uses special encapsulation
+   for multicast frames. Apparently, all IFF_POINTOPOINT and
+   IFF_BROADCAST devices are able to use multicasts too.
+ */
+
+/* IFLA_LINK.
+   For usual devices it is equal ifi_index.
+   If it is a "virtual interface" (f.e. tunnel), ifi_link
+   can point to real physical interface (f.e. for bandwidth calculations),
+   or maybe 0, what means, that real media is unknown (usual
+   for IPIP tunnels, when route to endpoint is allowed to change)
+ */
+
+/* Subtype attributes for IFLA_PROTINFO */
+enum {
+	IFLA_INET6_UNSPEC,
+	IFLA_INET6_FLAGS,	/* link flags			*/
+	IFLA_INET6_CONF,	/* sysctl parameters		*/
+	IFLA_INET6_STATS,	/* statistics			*/
+	IFLA_INET6_MCAST,	/* MC things. What of them?	*/
+	IFLA_INET6_CACHEINFO,	/* time values and max reasm size */
+	IFLA_INET6_ICMP6STATS,	/* statistics (icmpv6)		*/
+	__IFLA_INET6_MAX
+};
+
+#define IFLA_INET6_MAX	(__IFLA_INET6_MAX - 1)
+
+struct ifla_cacheinfo {
+	__u32	max_reasm_len;
+	__u32	tstamp;		/* ipv6InterfaceTable updated timestamp */
+	__u32	reachable_time;
+	__u32	retrans_time;
+};
+
+enum {
+	IFLA_INFO_UNSPEC,
+	IFLA_INFO_KIND,
+	IFLA_INFO_DATA,
+	IFLA_INFO_XSTATS,
+	__IFLA_INFO_MAX,
+};
+
+#define IFLA_INFO_MAX	(__IFLA_INFO_MAX - 1)
+
+/* VLAN section */
+
+enum {
+	IFLA_VLAN_UNSPEC,
+	IFLA_VLAN_ID,
+	IFLA_VLAN_FLAGS,
+	IFLA_VLAN_EGRESS_QOS,
+	IFLA_VLAN_INGRESS_QOS,
+	__IFLA_VLAN_MAX,
+};
+
+#define IFLA_VLAN_MAX	(__IFLA_VLAN_MAX - 1)
+
+struct ifla_vlan_flags {
+	__u32	flags;
+	__u32	mask;
+};
+
+enum {
+	IFLA_VLAN_QOS_UNSPEC,
+	IFLA_VLAN_QOS_MAPPING,
+	__IFLA_VLAN_QOS_MAX
+};
+
+#define IFLA_VLAN_QOS_MAX	(__IFLA_VLAN_QOS_MAX - 1)
+
+struct ifla_vlan_qos_mapping {
+	__u32 from;
+	__u32 to;
+};
+
+/* MACVLAN section */
+enum {
+	IFLA_MACVLAN_UNSPEC,
+	IFLA_MACVLAN_MODE,
+	__IFLA_MACVLAN_MAX,
+};
+
+#define IFLA_MACVLAN_MAX (__IFLA_MACVLAN_MAX - 1)
+
+enum macvlan_mode {
+	MACVLAN_MODE_PRIVATE = 1, /* don't talk to other macvlans */
+	MACVLAN_MODE_VEPA    = 2, /* talk to other ports through ext bridge */
+	MACVLAN_MODE_BRIDGE  = 4, /* talk to bridge ports directly */
+	MACVLAN_MODE_PASSTHRU = 8,/* take over the underlying device */
+};
+
+/* SR-IOV virtual function management section */
+
+enum {
+	IFLA_VF_INFO_UNSPEC,
+	IFLA_VF_INFO,
+	__IFLA_VF_INFO_MAX,
+};
+
+#define IFLA_VF_INFO_MAX (__IFLA_VF_INFO_MAX - 1)
+
+enum {
+	IFLA_VF_UNSPEC,
+	IFLA_VF_MAC,		/* Hardware queue specific attributes */
+	IFLA_VF_VLAN,
+	IFLA_VF_TX_RATE,	/* TX Bandwidth Allocation */
+	IFLA_VF_SPOOFCHK,	/* Spoof Checking on/off switch */
+	__IFLA_VF_MAX,
+};
+
+#define IFLA_VF_MAX (__IFLA_VF_MAX - 1)
+
+struct ifla_vf_mac {
+	__u32 vf;
+	__u8 mac[32]; /* MAX_ADDR_LEN */
+};
+
+struct ifla_vf_vlan {
+	__u32 vf;
+	__u32 vlan; /* 0 - 4095, 0 disables VLAN filter */
+	__u32 qos;
+};
+
+struct ifla_vf_tx_rate {
+	__u32 vf;
+	__u32 rate; /* Max TX bandwidth in Mbps, 0 disables throttling */
+};
+
+struct ifla_vf_spoofchk {
+	__u32 vf;
+	__u32 setting;
+};
+#ifdef __KERNEL__
+
+/* We don't want this structure exposed to user space */
+struct ifla_vf_info {
+	__u32 vf;
+	__u8 mac[32];
+	__u32 vlan;
+	__u32 qos;
+	__u32 tx_rate;
+	__u32 spoofchk;
+};
+#endif
+
+/* VF ports management section
+ *
+ *	Nested layout of set/get msg is:
+ *
+ *		[IFLA_NUM_VF]
+ *		[IFLA_VF_PORTS]
+ *			[IFLA_VF_PORT]
+ *				[IFLA_PORT_*], ...
+ *			[IFLA_VF_PORT]
+ *				[IFLA_PORT_*], ...
+ *			...
+ *		[IFLA_PORT_SELF]
+ *			[IFLA_PORT_*], ...
+ */
+
+enum {
+	IFLA_VF_PORT_UNSPEC,
+	IFLA_VF_PORT,			/* nest */
+	__IFLA_VF_PORT_MAX,
+};
+
+#define IFLA_VF_PORT_MAX (__IFLA_VF_PORT_MAX - 1)
+
+enum {
+	IFLA_PORT_UNSPEC,
+	IFLA_PORT_VF,			/* __u32 */
+	IFLA_PORT_PROFILE,		/* string */
+	IFLA_PORT_VSI_TYPE,		/* 802.1Qbg (pre-)standard VDP */
+	IFLA_PORT_INSTANCE_UUID,	/* binary UUID */
+	IFLA_PORT_HOST_UUID,		/* binary UUID */
+	IFLA_PORT_REQUEST,		/* __u8 */
+	IFLA_PORT_RESPONSE,		/* __u16, output only */
+	__IFLA_PORT_MAX,
+};
+
+#define IFLA_PORT_MAX (__IFLA_PORT_MAX - 1)
+
+#define PORT_PROFILE_MAX	40
+#define PORT_UUID_MAX		16
+#define PORT_SELF_VF		-1
+
+enum {
+	PORT_REQUEST_PREASSOCIATE = 0,
+	PORT_REQUEST_PREASSOCIATE_RR,
+	PORT_REQUEST_ASSOCIATE,
+	PORT_REQUEST_DISASSOCIATE,
+};
+
+enum {
+	PORT_VDP_RESPONSE_SUCCESS = 0,
+	PORT_VDP_RESPONSE_INVALID_FORMAT,
+	PORT_VDP_RESPONSE_INSUFFICIENT_RESOURCES,
+	PORT_VDP_RESPONSE_UNUSED_VTID,
+	PORT_VDP_RESPONSE_VTID_VIOLATION,
+	PORT_VDP_RESPONSE_VTID_VERSION_VIOALTION,
+	PORT_VDP_RESPONSE_OUT_OF_SYNC,
+	/* 0x08-0xFF reserved for future VDP use */
+	PORT_PROFILE_RESPONSE_SUCCESS = 0x100,
+	PORT_PROFILE_RESPONSE_INPROGRESS,
+	PORT_PROFILE_RESPONSE_INVALID,
+	PORT_PROFILE_RESPONSE_BADSTATE,
+	PORT_PROFILE_RESPONSE_INSUFFICIENT_RESOURCES,
+	PORT_PROFILE_RESPONSE_ERROR,
+};
+
+struct ifla_port_vsi {
+	__u8 vsi_mgr_id;
+	__u8 vsi_type_id[3];
+	__u8 vsi_type_version;
+	__u8 pad[3];
+};
+
+#endif /* _LINUX_IF_LINK_H */
diff --git a/include/linux/if_ltalk.h b/include/linux/if_ltalk.h
new file mode 100644
index 00000000..76525760
--- /dev/null
+++ b/include/linux/if_ltalk.h
@@ -0,0 +1,12 @@
+#ifndef __LINUX_LTALK_H
+#define __LINUX_LTALK_H
+
+#define LTALK_HLEN		1
+#define LTALK_MTU		600
+#define LTALK_ALEN		1
+
+#ifdef __KERNEL__
+extern struct net_device *alloc_ltalkdev(int sizeof_priv);
+#endif
+
+#endif
diff --git a/include/linux/if_macvlan.h b/include/linux/if_macvlan.h
new file mode 100644
index 00000000..d103dca5
--- /dev/null
+++ b/include/linux/if_macvlan.h
@@ -0,0 +1,108 @@
+#ifndef _LINUX_IF_MACVLAN_H
+#define _LINUX_IF_MACVLAN_H
+
+#include <linux/if_link.h>
+#include <linux/list.h>
+#include <linux/netdevice.h>
+#include <linux/netlink.h>
+#include <net/netlink.h>
+#include <linux/u64_stats_sync.h>
+
+#if defined(CONFIG_MACVTAP) || defined(CONFIG_MACVTAP_MODULE)
+struct socket *macvtap_get_socket(struct file *);
+#else
+#include <linux/err.h>
+#include <linux/errno.h>
+struct file;
+struct socket;
+static inline struct socket *macvtap_get_socket(struct file *f)
+{
+	return ERR_PTR(-EINVAL);
+}
+#endif /* CONFIG_MACVTAP */
+
+struct macvlan_port;
+struct macvtap_queue;
+
+/**
+ *	struct macvlan_pcpu_stats - MACVLAN percpu stats
+ *	@rx_packets: number of received packets
+ *	@rx_bytes: number of received bytes
+ *	@rx_multicast: number of received multicast packets
+ *	@tx_packets: number of transmitted packets
+ *	@tx_bytes: number of transmitted bytes
+ *	@syncp: synchronization point for 64bit counters
+ *	@rx_errors: number of rx errors
+ *	@tx_dropped: number of tx dropped packets
+ */
+struct macvlan_pcpu_stats {
+	u64			rx_packets;
+	u64			rx_bytes;
+	u64			rx_multicast;
+	u64			tx_packets;
+	u64			tx_bytes;
+	struct u64_stats_sync	syncp;
+	u32			rx_errors;
+	u32			tx_dropped;
+};
+
+/*
+ * Maximum times a macvtap device can be opened. This can be used to
+ * configure the number of receive queue, e.g. for multiqueue virtio.
+ */
+#define MAX_MACVTAP_QUEUES	(NR_CPUS < 16 ? NR_CPUS : 16)
+
+struct macvlan_dev {
+	struct net_device	*dev;
+	struct list_head	list;
+	struct hlist_node	hlist;
+	struct macvlan_port	*port;
+	struct net_device	*lowerdev;
+	struct macvlan_pcpu_stats __percpu *pcpu_stats;
+	enum macvlan_mode	mode;
+	int (*receive)(struct sk_buff *skb);
+	int (*forward)(struct net_device *dev, struct sk_buff *skb);
+	struct macvtap_queue	*taps[MAX_MACVTAP_QUEUES];
+	int			numvtaps;
+	int			minor;
+};
+
+static inline void macvlan_count_rx(const struct macvlan_dev *vlan,
+				    unsigned int len, bool success,
+				    bool multicast)
+{
+	if (likely(success)) {
+		struct macvlan_pcpu_stats *pcpu_stats;
+
+		pcpu_stats = this_cpu_ptr(vlan->pcpu_stats);
+		u64_stats_update_begin(&pcpu_stats->syncp);
+		pcpu_stats->rx_packets++;
+		pcpu_stats->rx_bytes += len;
+		if (multicast)
+			pcpu_stats->rx_multicast++;
+		u64_stats_update_end(&pcpu_stats->syncp);
+	} else {
+		this_cpu_inc(vlan->pcpu_stats->rx_errors);
+	}
+}
+
+extern void macvlan_common_setup(struct net_device *dev);
+
+extern int macvlan_common_newlink(struct net *src_net, struct net_device *dev,
+				  struct nlattr *tb[], struct nlattr *data[],
+				  int (*receive)(struct sk_buff *skb),
+				  int (*forward)(struct net_device *dev,
+						 struct sk_buff *skb));
+
+extern void macvlan_count_rx(const struct macvlan_dev *vlan,
+			     unsigned int len, bool success,
+			     bool multicast);
+
+extern void macvlan_dellink(struct net_device *dev, struct list_head *head);
+
+extern int macvlan_link_register(struct rtnl_link_ops *ops);
+
+extern netdev_tx_t macvlan_start_xmit(struct sk_buff *skb,
+				      struct net_device *dev);
+
+#endif /* _LINUX_IF_MACVLAN_H */
diff --git a/include/linux/if_packet.h b/include/linux/if_packet.h
new file mode 100644
index 00000000..f3799295
--- /dev/null
+++ b/include/linux/if_packet.h
@@ -0,0 +1,272 @@
+#ifndef __LINUX_IF_PACKET_H
+#define __LINUX_IF_PACKET_H
+
+#include <linux/types.h>
+
+struct sockaddr_pkt {
+	unsigned short spkt_family;
+	unsigned char spkt_device[14];
+	__be16 spkt_protocol;
+};
+
+struct sockaddr_ll {
+	unsigned short	sll_family;
+	__be16		sll_protocol;
+	int		sll_ifindex;
+	unsigned short	sll_hatype;
+	unsigned char	sll_pkttype;
+	unsigned char	sll_halen;
+	unsigned char	sll_addr[8];
+};
+
+/* Packet types */
+
+#define PACKET_HOST		0		/* To us		*/
+#define PACKET_BROADCAST	1		/* To all		*/
+#define PACKET_MULTICAST	2		/* To group		*/
+#define PACKET_OTHERHOST	3		/* To someone else 	*/
+#define PACKET_OUTGOING		4		/* Outgoing of any type */
+/* These ones are invisible by user level */
+#define PACKET_LOOPBACK		5		/* MC/BRD frame looped back */
+#define PACKET_FASTROUTE	6		/* Fastrouted frame	*/
+
+/* Packet socket options */
+
+#define PACKET_ADD_MEMBERSHIP		1
+#define PACKET_DROP_MEMBERSHIP		2
+#define PACKET_RECV_OUTPUT		3
+/* Value 4 is still used by obsolete turbo-packet. */
+#define PACKET_RX_RING			5
+#define PACKET_STATISTICS		6
+#define PACKET_COPY_THRESH		7
+#define PACKET_AUXDATA			8
+#define PACKET_ORIGDEV			9
+#define PACKET_VERSION			10
+#define PACKET_HDRLEN			11
+#define PACKET_RESERVE			12
+#define PACKET_TX_RING			13
+#define PACKET_LOSS			14
+#define PACKET_VNET_HDR			15
+#define PACKET_TX_TIMESTAMP		16
+#define PACKET_TIMESTAMP		17
+#define PACKET_FANOUT			18
+
+#define PACKET_FANOUT_HASH		0
+#define PACKET_FANOUT_LB		1
+#define PACKET_FANOUT_CPU		2
+#define PACKET_FANOUT_FLAG_DEFRAG	0x8000
+
+struct tpacket_stats {
+	unsigned int	tp_packets;
+	unsigned int	tp_drops;
+};
+
+struct tpacket_stats_v3 {
+	unsigned int	tp_packets;
+	unsigned int	tp_drops;
+	unsigned int	tp_freeze_q_cnt;
+};
+
+union tpacket_stats_u {
+	struct tpacket_stats stats1;
+	struct tpacket_stats_v3 stats3;
+};
+
+struct tpacket_auxdata {
+	__u32		tp_status;
+	__u32		tp_len;
+	__u32		tp_snaplen;
+	__u16		tp_mac;
+	__u16		tp_net;
+	__u16		tp_vlan_tci;
+	__u16		tp_padding;
+};
+
+/* Rx ring - header status */
+#define TP_STATUS_KERNEL	0x0
+#define TP_STATUS_USER		0x1
+#define TP_STATUS_COPY		0x2
+#define TP_STATUS_LOSING	0x4
+#define TP_STATUS_CSUMNOTREADY	0x8
+#define TP_STATUS_VLAN_VALID   0x10 /* auxdata has valid tp_vlan_tci */
+#define TP_STATUS_BLK_TMO	0x20
+
+/* Tx ring - header status */
+#define TP_STATUS_AVAILABLE	0x0
+#define TP_STATUS_SEND_REQUEST	0x1
+#define TP_STATUS_SENDING	0x2
+#define TP_STATUS_WRONG_FORMAT	0x4
+
+/* Rx ring - feature request bits */
+#define TP_FT_REQ_FILL_RXHASH	0x1
+
+struct tpacket_hdr {
+	unsigned long	tp_status;
+	unsigned int	tp_len;
+	unsigned int	tp_snaplen;
+	unsigned short	tp_mac;
+	unsigned short	tp_net;
+	unsigned int	tp_sec;
+	unsigned int	tp_usec;
+};
+
+#define TPACKET_ALIGNMENT	16
+#define TPACKET_ALIGN(x)	(((x)+TPACKET_ALIGNMENT-1)&~(TPACKET_ALIGNMENT-1))
+#define TPACKET_HDRLEN		(TPACKET_ALIGN(sizeof(struct tpacket_hdr)) + sizeof(struct sockaddr_ll))
+
+struct tpacket2_hdr {
+	__u32		tp_status;
+	__u32		tp_len;
+	__u32		tp_snaplen;
+	__u16		tp_mac;
+	__u16		tp_net;
+	__u32		tp_sec;
+	__u32		tp_nsec;
+	__u16		tp_vlan_tci;
+	__u16		tp_padding;
+};
+
+struct tpacket_hdr_variant1 {
+	__u32	tp_rxhash;
+	__u32	tp_vlan_tci;
+};
+
+struct tpacket3_hdr {
+	__u32		tp_next_offset;
+	__u32		tp_sec;
+	__u32		tp_nsec;
+	__u32		tp_snaplen;
+	__u32		tp_len;
+	__u32		tp_status;
+	__u16		tp_mac;
+	__u16		tp_net;
+	/* pkt_hdr variants */
+	union {
+		struct tpacket_hdr_variant1 hv1;
+	};
+};
+
+struct tpacket_bd_ts {
+	unsigned int ts_sec;
+	union {
+		unsigned int ts_usec;
+		unsigned int ts_nsec;
+	};
+};
+
+struct tpacket_hdr_v1 {
+	__u32	block_status;
+	__u32	num_pkts;
+	__u32	offset_to_first_pkt;
+
+	/* Number of valid bytes (including padding)
+	 * blk_len <= tp_block_size
+	 */
+	__u32	blk_len;
+
+	/*
+	 * Quite a few uses of sequence number:
+	 * 1. Make sure cache flush etc worked.
+	 *    Well, one can argue - why not use the increasing ts below?
+	 *    But look at 2. below first.
+	 * 2. When you pass around blocks to other user space decoders,
+	 *    you can see which blk[s] is[are] outstanding etc.
+	 * 3. Validate kernel code.
+	 */
+	__aligned_u64	seq_num;
+
+	/*
+	 * ts_last_pkt:
+	 *
+	 * Case 1.	Block has 'N'(N >=1) packets and TMO'd(timed out)
+	 *		ts_last_pkt == 'time-stamp of last packet' and NOT the
+	 *		time when the timer fired and the block was closed.
+	 *		By providing the ts of the last packet we can absolutely
+	 *		guarantee that time-stamp wise, the first packet in the
+	 *		next block will never precede the last packet of the
+	 *		previous block.
+	 * Case 2.	Block has zero packets and TMO'd
+	 *		ts_last_pkt = time when the timer fired and the block
+	 *		was closed.
+	 * Case 3.	Block has 'N' packets and NO TMO.
+	 *		ts_last_pkt = time-stamp of the last pkt in the block.
+	 *
+	 * ts_first_pkt:
+	 *		Is always the time-stamp when the block was opened.
+	 *		Case a)	ZERO packets
+	 *			No packets to deal with but atleast you know the
+	 *			time-interval of this block.
+	 *		Case b) Non-zero packets
+	 *			Use the ts of the first packet in the block.
+	 *
+	 */
+	struct tpacket_bd_ts	ts_first_pkt, ts_last_pkt;
+};
+
+union tpacket_bd_header_u {
+	struct tpacket_hdr_v1 bh1;
+};
+
+struct tpacket_block_desc {
+	__u32 version;
+	__u32 offset_to_priv;
+	union tpacket_bd_header_u hdr;
+};
+
+#define TPACKET2_HDRLEN		(TPACKET_ALIGN(sizeof(struct tpacket2_hdr)) + sizeof(struct sockaddr_ll))
+#define TPACKET3_HDRLEN		(TPACKET_ALIGN(sizeof(struct tpacket3_hdr)) + sizeof(struct sockaddr_ll))
+
+enum tpacket_versions {
+	TPACKET_V1,
+	TPACKET_V2,
+	TPACKET_V3
+};
+
+/*
+   Frame structure:
+
+   - Start. Frame must be aligned to TPACKET_ALIGNMENT=16
+   - struct tpacket_hdr
+   - pad to TPACKET_ALIGNMENT=16
+   - struct sockaddr_ll
+   - Gap, chosen so that packet data (Start+tp_net) alignes to TPACKET_ALIGNMENT=16
+   - Start+tp_mac: [ Optional MAC header ]
+   - Start+tp_net: Packet data, aligned to TPACKET_ALIGNMENT=16.
+   - Pad to align to TPACKET_ALIGNMENT=16
+ */
+
+struct tpacket_req {
+	unsigned int	tp_block_size;	/* Minimal size of contiguous block */
+	unsigned int	tp_block_nr;	/* Number of blocks */
+	unsigned int	tp_frame_size;	/* Size of frame */
+	unsigned int	tp_frame_nr;	/* Total number of frames */
+};
+
+struct tpacket_req3 {
+	unsigned int	tp_block_size;	/* Minimal size of contiguous block */
+	unsigned int	tp_block_nr;	/* Number of blocks */
+	unsigned int	tp_frame_size;	/* Size of frame */
+	unsigned int	tp_frame_nr;	/* Total number of frames */
+	unsigned int	tp_retire_blk_tov; /* timeout in msecs */
+	unsigned int	tp_sizeof_priv; /* offset to private data area */
+	unsigned int	tp_feature_req_word;
+};
+
+union tpacket_req_u {
+	struct tpacket_req	req;
+	struct tpacket_req3	req3;
+};
+
+struct packet_mreq {
+	int		mr_ifindex;
+	unsigned short	mr_type;
+	unsigned short	mr_alen;
+	unsigned char	mr_address[8];
+};
+
+#define PACKET_MR_MULTICAST	0
+#define PACKET_MR_PROMISC	1
+#define PACKET_MR_ALLMULTI	2
+#define PACKET_MR_UNICAST	3
+
+#endif
diff --git a/include/linux/if_phonet.h b/include/linux/if_phonet.h
new file mode 100644
index 00000000..d70034bc
--- /dev/null
+++ b/include/linux/if_phonet.h
@@ -0,0 +1,19 @@
+/*
+ * File: if_phonet.h
+ *
+ * Phonet interface kernel definitions
+ *
+ * Copyright (C) 2008 Nokia Corporation. All rights reserved.
+ */
+#ifndef LINUX_IF_PHONET_H
+#define LINUX_IF_PHONET_H
+
+#define PHONET_MIN_MTU		6	/* pn_length = 0 */
+#define PHONET_MAX_MTU		65541	/* pn_length = 0xffff */
+#define PHONET_DEV_MTU		PHONET_MAX_MTU
+
+#ifdef __KERNEL__
+extern struct header_ops phonet_header_ops;
+#endif
+
+#endif
diff --git a/include/linux/if_plip.h b/include/linux/if_plip.h
new file mode 100644
index 00000000..6298c7e8
--- /dev/null
+++ b/include/linux/if_plip.h
@@ -0,0 +1,27 @@
+/*
+ *	NET3	PLIP tuning facilities for the new Niibe PLIP.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ */
+ 
+#ifndef _LINUX_IF_PLIP_H
+#define _LINUX_IF_PLIP_H
+
+#include <linux/sockios.h>
+
+#define	SIOCDEVPLIP	SIOCDEVPRIVATE
+
+struct plipconf {
+	unsigned short pcmd;
+	unsigned long  nibble;
+	unsigned long  trigger;
+};
+
+#define PLIP_GET_TIMEOUT	0x1
+#define PLIP_SET_TIMEOUT	0x2
+
+#endif
diff --git a/include/linux/if_ppp.h b/include/linux/if_ppp.h
new file mode 100644
index 00000000..9048fabb
--- /dev/null
+++ b/include/linux/if_ppp.h
@@ -0,0 +1 @@
+#include <linux/ppp-ioctl.h>
diff --git a/include/linux/if_pppol2tp.h b/include/linux/if_pppol2tp.h
new file mode 100644
index 00000000..23cefa11
--- /dev/null
+++ b/include/linux/if_pppol2tp.h
@@ -0,0 +1,82 @@
+/***************************************************************************
+ * Linux PPP over L2TP (PPPoL2TP) Socket Implementation (RFC 2661)
+ *
+ * This file supplies definitions required by the PPP over L2TP driver
+ * (l2tp_ppp.c).  All version information wrt this file is located in l2tp_ppp.c
+ *
+ * License:
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef __LINUX_IF_PPPOL2TP_H
+#define __LINUX_IF_PPPOL2TP_H
+
+#include <linux/types.h>
+
+#ifdef __KERNEL__
+#include <linux/in.h>
+#endif
+
+/* Structure used to connect() the socket to a particular tunnel UDP
+ * socket.
+ */
+struct pppol2tp_addr {
+	__kernel_pid_t	pid;		/* pid that owns the fd.
+					 * 0 => current */
+	int	fd;			/* FD of UDP socket to use */
+
+	struct sockaddr_in addr;	/* IP address and port to send to */
+
+	__u16 s_tunnel, s_session;	/* For matching incoming packets */
+	__u16 d_tunnel, d_session;	/* For sending outgoing packets */
+};
+
+/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32
+ * bits. So we need a different sockaddr structure.
+ */
+struct pppol2tpv3_addr {
+	__kernel_pid_t	pid;		/* pid that owns the fd.
+					 * 0 => current */
+	int	fd;			/* FD of UDP or IP socket to use */
+
+	struct sockaddr_in addr;	/* IP address and port to send to */
+
+	__u32 s_tunnel, s_session;	/* For matching incoming packets */
+	__u32 d_tunnel, d_session;	/* For sending outgoing packets */
+};
+
+/* Socket options:
+ * DEBUG	- bitmask of debug message categories
+ * SENDSEQ	- 0 => don't send packets with sequence numbers
+ *		  1 => send packets with sequence numbers
+ * RECVSEQ	- 0 => receive packet sequence numbers are optional
+ *		  1 => drop receive packets without sequence numbers
+ * LNSMODE	- 0 => act as LAC.
+ *		  1 => act as LNS.
+ * REORDERTO	- reorder timeout (in millisecs). If 0, don't try to reorder.
+ */
+enum {
+	PPPOL2TP_SO_DEBUG	= 1,
+	PPPOL2TP_SO_RECVSEQ	= 2,
+	PPPOL2TP_SO_SENDSEQ	= 3,
+	PPPOL2TP_SO_LNSMODE	= 4,
+	PPPOL2TP_SO_REORDERTO	= 5,
+};
+
+/* Debug message categories for the DEBUG socket option */
+enum {
+	PPPOL2TP_MSG_DEBUG	= (1 << 0),	/* verbose debug (if
+						 * compiled in) */
+	PPPOL2TP_MSG_CONTROL	= (1 << 1),	/* userspace - kernel
+						 * interface */
+	PPPOL2TP_MSG_SEQ	= (1 << 2),	/* sequence numbers */
+	PPPOL2TP_MSG_DATA	= (1 << 3),	/* data packets */
+};
+
+
+
+#endif
diff --git a/include/linux/if_pppolac.h b/include/linux/if_pppolac.h
new file mode 100644
index 00000000..c06bd6c8
--- /dev/null
+++ b/include/linux/if_pppolac.h
@@ -0,0 +1,33 @@
+/* include/linux/if_pppolac.h
+ *
+ * Header for PPP on L2TP Access Concentrator / PPPoLAC Socket (RFC 2661)
+ *
+ * Copyright (C) 2009 Google, Inc.
+ * Author: Chia-chi Yeh <chiachi@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_IF_PPPOLAC_H
+#define __LINUX_IF_PPPOLAC_H
+
+#include <linux/socket.h>
+#include <linux/types.h>
+
+struct sockaddr_pppolac {
+	sa_family_t	sa_family;	/* AF_PPPOX */
+	unsigned int	sa_protocol;	/* PX_PROTO_OLAC */
+	int		udp_socket;
+	struct __attribute__((packed)) {
+		__u16	tunnel, session;
+	} local, remote;
+} __attribute__((packed));
+
+#endif /* __LINUX_IF_PPPOLAC_H */
diff --git a/include/linux/if_pppopns.h b/include/linux/if_pppopns.h
new file mode 100644
index 00000000..0cf34b4d
--- /dev/null
+++ b/include/linux/if_pppopns.h
@@ -0,0 +1,32 @@
+/* include/linux/if_pppopns.h
+ *
+ * Header for PPP on PPTP Network Server / PPPoPNS Socket (RFC 2637)
+ *
+ * Copyright (C) 2009 Google, Inc.
+ * Author: Chia-chi Yeh <chiachi@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_IF_PPPOPNS_H
+#define __LINUX_IF_PPPOPNS_H
+
+#include <linux/socket.h>
+#include <linux/types.h>
+
+struct sockaddr_pppopns {
+	sa_family_t	sa_family;	/* AF_PPPOX */
+	unsigned int	sa_protocol;	/* PX_PROTO_OPNS */
+	int		tcp_socket;
+	__u16		local;
+	__u16		remote;
+} __attribute__((packed));
+
+#endif /* __LINUX_IF_PPPOPNS_H */
diff --git a/include/linux/if_pppox.h b/include/linux/if_pppox.h
new file mode 100644
index 00000000..1597b8bc
--- /dev/null
+++ b/include/linux/if_pppox.h
@@ -0,0 +1,250 @@
+/***************************************************************************
+ * Linux PPP over X - Generic PPP transport layer sockets
+ * Linux PPP over Ethernet (PPPoE) Socket Implementation (RFC 2516) 
+ *
+ * This file supplies definitions required by the PPP over Ethernet driver
+ * (pppox.c).  All version information wrt this file is located in pppox.c
+ *
+ * License:
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef __LINUX_IF_PPPOX_H
+#define __LINUX_IF_PPPOX_H
+
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#include <linux/socket.h>
+#include <linux/if_ether.h>
+#ifdef  __KERNEL__
+#include <linux/if.h>
+#include <linux/netdevice.h>
+#include <linux/ppp_channel.h>
+#endif /* __KERNEL__ */
+#include <linux/if_pppol2tp.h>
+#include <linux/if_pppolac.h>
+#include <linux/if_pppopns.h>
+
+/* For user-space programs to pick up these definitions
+ * which they wouldn't get otherwise without defining __KERNEL__
+ */
+#ifndef AF_PPPOX
+#define AF_PPPOX	24
+#define PF_PPPOX	AF_PPPOX
+#endif /* !(AF_PPPOX) */
+
+/************************************************************************ 
+ * PPPoE addressing definition 
+ */ 
+typedef __be16 sid_t;
+struct pppoe_addr {
+	sid_t         sid;                    /* Session identifier */
+	unsigned char remote[ETH_ALEN];       /* Remote address */
+	char          dev[IFNAMSIZ];          /* Local device to use */
+}; 
+ 
+/************************************************************************ 
+ * PPTP addressing definition
+ */
+struct pptp_addr {
+	__be16		call_id;
+	struct in_addr	sin_addr;
+};
+
+/************************************************************************
+ * Protocols supported by AF_PPPOX
+ */
+#define PX_PROTO_OE    0 /* Currently just PPPoE */
+#define PX_PROTO_OL2TP 1 /* Now L2TP also */
+#define PX_PROTO_PPTP  2
+#define PX_PROTO_OLAC  3
+#define PX_PROTO_OPNS  4
+#define PX_MAX_PROTO   5
+
+struct sockaddr_pppox {
+	__kernel_sa_family_t sa_family;       /* address family, AF_PPPOX */
+	unsigned int    sa_protocol;          /* protocol identifier */
+	union {
+		struct pppoe_addr  pppoe;
+		struct pptp_addr   pptp;
+	} sa_addr;
+} __attribute__((packed));
+
+/* The use of the above union isn't viable because the size of this
+ * struct must stay fixed over time -- applications use sizeof(struct
+ * sockaddr_pppox) to fill it. We use a protocol specific sockaddr
+ * type instead.
+ */
+struct sockaddr_pppol2tp {
+	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
+	unsigned int    sa_protocol;    /* protocol identifier */
+	struct pppol2tp_addr pppol2tp;
+} __attribute__((packed));
+
+/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32
+ * bits. So we need a different sockaddr structure.
+ */
+struct sockaddr_pppol2tpv3 {
+	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
+	unsigned int    sa_protocol;    /* protocol identifier */
+	struct pppol2tpv3_addr pppol2tp;
+} __attribute__((packed));
+
+/*********************************************************************
+ *
+ * ioctl interface for defining forwarding of connections
+ *
+ ********************************************************************/
+
+#define PPPOEIOCSFWD	_IOW(0xB1 ,0, size_t)
+#define PPPOEIOCDFWD	_IO(0xB1 ,1)
+/*#define PPPOEIOCGFWD	_IOWR(0xB1,2, size_t)*/
+
+/* Codes to identify message types */
+#define PADI_CODE	0x09
+#define PADO_CODE	0x07
+#define PADR_CODE	0x19
+#define PADS_CODE	0x65
+#define PADT_CODE	0xa7
+struct pppoe_tag {
+	__be16 tag_type;
+	__be16 tag_len;
+	char tag_data[0];
+} __attribute__ ((packed));
+
+/* Tag identifiers */
+#define PTT_EOL		__cpu_to_be16(0x0000)
+#define PTT_SRV_NAME	__cpu_to_be16(0x0101)
+#define PTT_AC_NAME	__cpu_to_be16(0x0102)
+#define PTT_HOST_UNIQ	__cpu_to_be16(0x0103)
+#define PTT_AC_COOKIE	__cpu_to_be16(0x0104)
+#define PTT_VENDOR 	__cpu_to_be16(0x0105)
+#define PTT_RELAY_SID	__cpu_to_be16(0x0110)
+#define PTT_SRV_ERR     __cpu_to_be16(0x0201)
+#define PTT_SYS_ERR  	__cpu_to_be16(0x0202)
+#define PTT_GEN_ERR  	__cpu_to_be16(0x0203)
+
+struct pppoe_hdr {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 ver : 4;
+	__u8 type : 4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u8 type : 4;
+	__u8 ver : 4;
+#else
+#error	"Please fix <asm/byteorder.h>"
+#endif
+	__u8 code;
+	__be16 sid;
+	__be16 length;
+	struct pppoe_tag tag[0];
+} __attribute__((packed));
+
+/* Length of entire PPPoE + PPP header */
+#define PPPOE_SES_HLEN	8
+
+#ifdef __KERNEL__
+#include <linux/skbuff.h>
+
+static inline struct pppoe_hdr *pppoe_hdr(const struct sk_buff *skb)
+{
+	return (struct pppoe_hdr *)skb_network_header(skb);
+}
+
+struct pppoe_opt {
+	struct net_device      *dev;	  /* device associated with socket*/
+	int			ifindex;  /* ifindex of device associated with socket */
+	struct pppoe_addr	pa;	  /* what this socket is bound to*/
+	struct sockaddr_pppox	relay;	  /* what socket data will be
+					     relayed to (PPPoE relaying) */
+};
+
+struct pptp_opt {
+	struct pptp_addr src_addr;
+	struct pptp_addr dst_addr;
+	u32 ack_sent, ack_recv;
+	u32 seq_sent, seq_recv;
+	int ppp_flags;
+};
+
+struct pppolac_opt {
+	__u32		local;
+	__u32		remote;
+	__u32		recv_sequence;
+	__u32		xmit_sequence;
+	atomic_t	sequencing;
+	int		(*backlog_rcv)(struct sock *sk_udp, struct sk_buff *skb);
+};
+
+struct pppopns_opt {
+	__u16		local;
+	__u16		remote;
+	__u32		recv_sequence;
+	__u32		xmit_sequence;
+	void		(*data_ready)(struct sock *sk_raw, int length);
+	int		(*backlog_rcv)(struct sock *sk_raw, struct sk_buff *skb);
+};
+
+#include <net/sock.h>
+
+struct pppox_sock {
+	/* struct sock must be the first member of pppox_sock */
+	struct sock sk;
+	struct ppp_channel chan;
+	struct pppox_sock	*next;	  /* for hash table */
+	union {
+		struct pppoe_opt pppoe;
+		struct pptp_opt  pptp;
+		struct pppolac_opt lac;
+		struct pppopns_opt pns;
+	} proto;
+	__be16			num;
+};
+#define pppoe_dev	proto.pppoe.dev
+#define pppoe_ifindex	proto.pppoe.ifindex
+#define pppoe_pa	proto.pppoe.pa
+#define pppoe_relay	proto.pppoe.relay
+
+static inline struct pppox_sock *pppox_sk(struct sock *sk)
+{
+	return (struct pppox_sock *)sk;
+}
+
+static inline struct sock *sk_pppox(struct pppox_sock *po)
+{
+	return (struct sock *)po;
+}
+
+struct module;
+
+struct pppox_proto {
+	int		(*create)(struct net *net, struct socket *sock);
+	int		(*ioctl)(struct socket *sock, unsigned int cmd,
+				 unsigned long arg);
+	struct module	*owner;
+};
+
+extern int register_pppox_proto(int proto_num, const struct pppox_proto *pp);
+extern void unregister_pppox_proto(int proto_num);
+extern void pppox_unbind_sock(struct sock *sk);/* delete ppp-channel binding */
+extern int pppox_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg);
+
+/* PPPoX socket states */
+enum {
+    PPPOX_NONE		= 0,  /* initial state */
+    PPPOX_CONNECTED	= 1,  /* connection established ==TCP_ESTABLISHED */
+    PPPOX_BOUND		= 2,  /* bound to ppp device */
+    PPPOX_RELAY		= 4,  /* forwarding is enabled */
+    PPPOX_ZOMBIE	= 8,  /* dead, but still bound to ppp device */
+    PPPOX_DEAD		= 16  /* dead, useless, please clean me up!*/
+};
+
+#endif /* __KERNEL__ */
+
+#endif /* !(__LINUX_IF_PPPOX_H) */
diff --git a/include/linux/if_slip.h b/include/linux/if_slip.h
new file mode 100644
index 00000000..1eb4e3a8
--- /dev/null
+++ b/include/linux/if_slip.h
@@ -0,0 +1,30 @@
+/*
+ *	Swansea University Computer Society	NET3
+ *	
+ *	This file declares the constants of special use with the SLIP/CSLIP/
+ *	KISS TNC driver.
+ */
+ 
+#ifndef __LINUX_SLIP_H
+#define __LINUX_SLIP_H
+
+#define		SL_MODE_SLIP		0
+#define		SL_MODE_CSLIP		1
+#define 	SL_MODE_KISS		4
+
+#define		SL_OPT_SIXBIT		2
+#define		SL_OPT_ADAPTIVE		8
+
+/*
+ *	VSV = ioctl for keepalive & outfill in SLIP driver 
+ */
+ 
+#define SIOCSKEEPALIVE	(SIOCDEVPRIVATE)		/* Set keepalive timeout in sec */
+#define SIOCGKEEPALIVE	(SIOCDEVPRIVATE+1)		/* Get keepalive timeout */
+#define SIOCSOUTFILL	(SIOCDEVPRIVATE+2)		/* Set outfill timeout */
+#define	SIOCGOUTFILL	(SIOCDEVPRIVATE+3)		/* Get outfill timeout */
+#define SIOCSLEASE	(SIOCDEVPRIVATE+4)		/* Set "leased" line type */
+#define	SIOCGLEASE	(SIOCDEVPRIVATE+5)		/* Get line type */
+
+
+#endif
diff --git a/include/linux/if_strip.h b/include/linux/if_strip.h
new file mode 100644
index 00000000..6526a623
--- /dev/null
+++ b/include/linux/if_strip.h
@@ -0,0 +1,27 @@
+/*
+ * if_strip.h --
+ *
+ *      Definitions for the STRIP interface
+ *
+ * Copyright 1996 The Board of Trustees of The Leland Stanford
+ * Junior University. All Rights Reserved.
+ *
+ * Permission to use, copy, modify, and distribute this
+ * software and its documentation for any purpose and without
+ * fee is hereby granted, provided that the above copyright
+ * notice appear in all copies.  Stanford University
+ * makes no representations about the suitability of this
+ * software for any purpose.  It is provided "as is" without
+ * express or implied warranty.
+ */
+
+#ifndef __LINUX_STRIP_H
+#define __LINUX_STRIP_H
+
+#include <linux/types.h>
+
+typedef struct {
+    __u8 c[6];
+} MetricomAddress;
+
+#endif
diff --git a/include/linux/if_team.h b/include/linux/if_team.h
new file mode 100644
index 00000000..58404b0c
--- /dev/null
+++ b/include/linux/if_team.h
@@ -0,0 +1,252 @@
+/*
+ * include/linux/if_team.h - Network team device driver header
+ * Copyright (c) 2011 Jiri Pirko <jpirko@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _LINUX_IF_TEAM_H_
+#define _LINUX_IF_TEAM_H_
+
+#ifdef __KERNEL__
+
+struct team_pcpu_stats {
+	u64			rx_packets;
+	u64			rx_bytes;
+	u64			rx_multicast;
+	u64			tx_packets;
+	u64			tx_bytes;
+	struct u64_stats_sync	syncp;
+	u32			rx_dropped;
+	u32			tx_dropped;
+};
+
+struct team;
+
+struct team_port {
+	struct net_device *dev;
+	struct hlist_node hlist; /* node in hash list */
+	struct list_head list; /* node in ordinary list */
+	struct team *team;
+	int index;
+
+	/*
+	 * A place for storing original values of the device before it
+	 * become a port.
+	 */
+	struct {
+		unsigned char dev_addr[MAX_ADDR_LEN];
+		unsigned int mtu;
+	} orig;
+
+	bool linkup;
+	u32 speed;
+	u8 duplex;
+
+	/* Custom gennetlink interface related flags */
+	bool changed;
+	bool removed;
+
+	struct rcu_head rcu;
+};
+
+struct team_mode_ops {
+	int (*init)(struct team *team);
+	void (*exit)(struct team *team);
+	rx_handler_result_t (*receive)(struct team *team,
+				       struct team_port *port,
+				       struct sk_buff *skb);
+	bool (*transmit)(struct team *team, struct sk_buff *skb);
+	int (*port_enter)(struct team *team, struct team_port *port);
+	void (*port_leave)(struct team *team, struct team_port *port);
+	void (*port_change_mac)(struct team *team, struct team_port *port);
+};
+
+enum team_option_type {
+	TEAM_OPTION_TYPE_U32,
+	TEAM_OPTION_TYPE_STRING,
+};
+
+struct team_option {
+	struct list_head list;
+	const char *name;
+	enum team_option_type type;
+	int (*getter)(struct team *team, void *arg);
+	int (*setter)(struct team *team, void *arg);
+
+	/* Custom gennetlink interface related flags */
+	bool changed;
+	bool removed;
+};
+
+struct team_mode {
+	struct list_head list;
+	const char *kind;
+	struct module *owner;
+	size_t priv_size;
+	const struct team_mode_ops *ops;
+};
+
+#define TEAM_PORT_HASHBITS 4
+#define TEAM_PORT_HASHENTRIES (1 << TEAM_PORT_HASHBITS)
+
+#define TEAM_MODE_PRIV_LONGS 4
+#define TEAM_MODE_PRIV_SIZE (sizeof(long) * TEAM_MODE_PRIV_LONGS)
+
+struct team {
+	struct net_device *dev; /* associated netdevice */
+	struct team_pcpu_stats __percpu *pcpu_stats;
+
+	struct mutex lock; /* used for overall locking, e.g. port lists write */
+
+	/*
+	 * port lists with port count
+	 */
+	int port_count;
+	struct hlist_head port_hlist[TEAM_PORT_HASHENTRIES];
+	struct list_head port_list;
+
+	struct list_head option_list;
+
+	const struct team_mode *mode;
+	struct team_mode_ops ops;
+	long mode_priv[TEAM_MODE_PRIV_LONGS];
+};
+
+static inline struct hlist_head *team_port_index_hash(struct team *team,
+						      int port_index)
+{
+	return &team->port_hlist[port_index & (TEAM_PORT_HASHENTRIES - 1)];
+}
+
+static inline struct team_port *team_get_port_by_index(struct team *team,
+						       int port_index)
+{
+	struct hlist_node *p;
+	struct team_port *port;
+	struct hlist_head *head = team_port_index_hash(team, port_index);
+
+	hlist_for_each_entry(port, p, head, hlist)
+		if (port->index == port_index)
+			return port;
+	return NULL;
+}
+static inline struct team_port *team_get_port_by_index_rcu(struct team *team,
+							   int port_index)
+{
+	struct hlist_node *p;
+	struct team_port *port;
+	struct hlist_head *head = team_port_index_hash(team, port_index);
+
+	hlist_for_each_entry_rcu(port, p, head, hlist)
+		if (port->index == port_index)
+			return port;
+	return NULL;
+}
+
+extern int team_port_set_team_mac(struct team_port *port);
+extern int team_options_register(struct team *team,
+				 const struct team_option *option,
+				 size_t option_count);
+extern void team_options_unregister(struct team *team,
+				    const struct team_option *option,
+				    size_t option_count);
+extern int team_mode_register(struct team_mode *mode);
+extern int team_mode_unregister(struct team_mode *mode);
+
+#endif /* __KERNEL__ */
+
+#define TEAM_STRING_MAX_LEN 32
+
+/**********************************
+ * NETLINK_GENERIC netlink family.
+ **********************************/
+
+enum {
+	TEAM_CMD_NOOP,
+	TEAM_CMD_OPTIONS_SET,
+	TEAM_CMD_OPTIONS_GET,
+	TEAM_CMD_PORT_LIST_GET,
+
+	__TEAM_CMD_MAX,
+	TEAM_CMD_MAX = (__TEAM_CMD_MAX - 1),
+};
+
+enum {
+	TEAM_ATTR_UNSPEC,
+	TEAM_ATTR_TEAM_IFINDEX,		/* u32 */
+	TEAM_ATTR_LIST_OPTION,		/* nest */
+	TEAM_ATTR_LIST_PORT,		/* nest */
+
+	__TEAM_ATTR_MAX,
+	TEAM_ATTR_MAX = __TEAM_ATTR_MAX - 1,
+};
+
+/* Nested layout of get/set msg:
+ *
+ *	[TEAM_ATTR_LIST_OPTION]
+ *		[TEAM_ATTR_ITEM_OPTION]
+ *			[TEAM_ATTR_OPTION_*], ...
+ *		[TEAM_ATTR_ITEM_OPTION]
+ *			[TEAM_ATTR_OPTION_*], ...
+ *		...
+ *	[TEAM_ATTR_LIST_PORT]
+ *		[TEAM_ATTR_ITEM_PORT]
+ *			[TEAM_ATTR_PORT_*], ...
+ *		[TEAM_ATTR_ITEM_PORT]
+ *			[TEAM_ATTR_PORT_*], ...
+ *		...
+ */
+
+enum {
+	TEAM_ATTR_ITEM_OPTION_UNSPEC,
+	TEAM_ATTR_ITEM_OPTION,		/* nest */
+
+	__TEAM_ATTR_ITEM_OPTION_MAX,
+	TEAM_ATTR_ITEM_OPTION_MAX = __TEAM_ATTR_ITEM_OPTION_MAX - 1,
+};
+
+enum {
+	TEAM_ATTR_OPTION_UNSPEC,
+	TEAM_ATTR_OPTION_NAME,		/* string */
+	TEAM_ATTR_OPTION_CHANGED,	/* flag */
+	TEAM_ATTR_OPTION_TYPE,		/* u8 */
+	TEAM_ATTR_OPTION_DATA,		/* dynamic */
+	TEAM_ATTR_OPTION_REMOVED,	/* flag */
+
+	__TEAM_ATTR_OPTION_MAX,
+	TEAM_ATTR_OPTION_MAX = __TEAM_ATTR_OPTION_MAX - 1,
+};
+
+enum {
+	TEAM_ATTR_ITEM_PORT_UNSPEC,
+	TEAM_ATTR_ITEM_PORT,		/* nest */
+
+	__TEAM_ATTR_ITEM_PORT_MAX,
+	TEAM_ATTR_ITEM_PORT_MAX = __TEAM_ATTR_ITEM_PORT_MAX - 1,
+};
+
+enum {
+	TEAM_ATTR_PORT_UNSPEC,
+	TEAM_ATTR_PORT_IFINDEX,		/* u32 */
+	TEAM_ATTR_PORT_CHANGED,		/* flag */
+	TEAM_ATTR_PORT_LINKUP,		/* flag */
+	TEAM_ATTR_PORT_SPEED,		/* u32 */
+	TEAM_ATTR_PORT_DUPLEX,		/* u8 */
+	TEAM_ATTR_PORT_REMOVED,		/* flag */
+
+	__TEAM_ATTR_PORT_MAX,
+	TEAM_ATTR_PORT_MAX = __TEAM_ATTR_PORT_MAX - 1,
+};
+
+/*
+ * NETLINK_GENERIC related info
+ */
+#define TEAM_GENL_NAME "team"
+#define TEAM_GENL_VERSION 0x1
+#define TEAM_GENL_CHANGE_EVENT_MC_GRP_NAME "change_event"
+
+#endif /* _LINUX_IF_TEAM_H_ */
diff --git a/include/linux/if_tr.h b/include/linux/if_tr.h
new file mode 100644
index 00000000..fc23aeb0
--- /dev/null
+++ b/include/linux/if_tr.h
@@ -0,0 +1,103 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the Token-Ring IEEE 802.5 interface.
+ *
+ * Version:	@(#)if_tr.h	0.0	07/11/94
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Donald Becker, <becker@super.org>
+ *		Peter De Schrijver, <stud11@cc4.kuleuven.ac.be>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_IF_TR_H
+#define _LINUX_IF_TR_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>	/* For __be16 */
+
+/* IEEE 802.5 Token-Ring magic constants.  The frame sizes omit the preamble
+   and FCS/CRC (frame check sequence). */
+#define TR_ALEN		6		/* Octets in one token-ring addr */
+#define TR_HLEN 	(sizeof(struct trh_hdr)+sizeof(struct trllc))
+#define AC		0x10
+#define LLC_FRAME 	0x40
+
+/* LLC and SNAP constants */
+#define EXTENDED_SAP 	0xAA
+#define UI_CMD       	0x03
+
+/* This is an Token-Ring frame header. */
+struct trh_hdr {
+	__u8  ac;			/* access control field */
+	__u8  fc;			/* frame control field */
+	__u8  daddr[TR_ALEN];		/* destination address */
+	__u8  saddr[TR_ALEN];		/* source address */
+	__be16 rcf;			/* route control field */
+	__be16 rseg[8];			/* routing registers */
+};
+
+#ifdef __KERNEL__
+#include <linux/skbuff.h>
+
+static inline struct trh_hdr *tr_hdr(const struct sk_buff *skb)
+{
+	return (struct trh_hdr *)skb_mac_header(skb);
+}
+#endif
+
+/* This is an Token-Ring LLC structure */
+struct trllc {
+	__u8  dsap;			/* destination SAP */
+	__u8  ssap;			/* source SAP */
+	__u8  llc;			/* LLC control field */
+	__u8  protid[3];		/* protocol id */
+	__be16 ethertype;		/* ether type field */
+};
+
+/* Token-Ring statistics collection data. */
+struct tr_statistics {
+	unsigned long rx_packets;       /* total packets received	*/
+	unsigned long tx_packets;	/* total packets transmitted	*/
+	unsigned long rx_bytes;		/* total bytes received   	*/
+	unsigned long tx_bytes;		/* total bytes transmitted	*/
+	unsigned long rx_errors;	/* bad packets received		*/
+	unsigned long tx_errors;	/* packet transmit problems	*/
+	unsigned long rx_dropped;	/* no space in linux buffers	*/
+	unsigned long tx_dropped;	/* no space available in linux	*/
+	unsigned long multicast;	/* multicast packets received	*/
+	unsigned long transmit_collision;
+
+	/* detailed Token-Ring errors. See IBM Token-Ring Network
+	   Architecture for more info */
+
+	unsigned long line_errors;
+	unsigned long internal_errors;
+	unsigned long burst_errors;
+	unsigned long A_C_errors;
+	unsigned long abort_delimiters;
+	unsigned long lost_frames;
+	unsigned long recv_congest_count;
+	unsigned long frame_copied_errors;
+	unsigned long frequency_errors;
+	unsigned long token_errors;
+	unsigned long dummy1;
+};
+
+/* source routing stuff */
+#define TR_RII 			0x80
+#define TR_RCF_DIR_BIT 		0x80
+#define TR_RCF_LEN_MASK 	0x1f00
+#define TR_RCF_BROADCAST 	0x8000	/* all-routes broadcast */
+#define TR_RCF_LIMITED_BROADCAST 0xC000	/* single-route broadcast */
+#define TR_RCF_FRAME2K 		0x20
+#define TR_RCF_BROADCAST_MASK 	0xC000
+#define TR_MAXRIFLEN 		18
+
+#endif	/* _LINUX_IF_TR_H */
diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h
new file mode 100644
index 00000000..06b18297
--- /dev/null
+++ b/include/linux/if_tun.h
@@ -0,0 +1,108 @@
+/*
+ *  Universal TUN/TAP device driver.
+ *  Copyright (C) 1999-2000 Maxim Krasnyansky <max_mk@yahoo.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *  GNU General Public License for more details.
+ */
+
+#ifndef __IF_TUN_H
+#define __IF_TUN_H
+
+#include <linux/types.h>
+#include <linux/if_ether.h>
+#include <linux/filter.h>
+
+/* Read queue size */
+#define TUN_READQ_SIZE	500
+
+/* TUN device flags */
+#define TUN_TUN_DEV 	0x0001	
+#define TUN_TAP_DEV	0x0002
+#define TUN_TYPE_MASK   0x000f
+
+#define TUN_FASYNC	0x0010
+#define TUN_NOCHECKSUM	0x0020
+#define TUN_NO_PI	0x0040
+#define TUN_ONE_QUEUE	0x0080
+#define TUN_PERSIST 	0x0100	
+#define TUN_VNET_HDR 	0x0200
+
+/* Ioctl defines */
+#define TUNSETNOCSUM  _IOW('T', 200, int) 
+#define TUNSETDEBUG   _IOW('T', 201, int) 
+#define TUNSETIFF     _IOW('T', 202, int) 
+#define TUNSETPERSIST _IOW('T', 203, int) 
+#define TUNSETOWNER   _IOW('T', 204, int)
+#define TUNSETLINK    _IOW('T', 205, int)
+#define TUNSETGROUP   _IOW('T', 206, int)
+#define TUNGETFEATURES _IOR('T', 207, unsigned int)
+#define TUNSETOFFLOAD  _IOW('T', 208, unsigned int)
+#define TUNSETTXFILTER _IOW('T', 209, unsigned int)
+#define TUNGETIFF      _IOR('T', 210, unsigned int)
+#define TUNGETSNDBUF   _IOR('T', 211, int)
+#define TUNSETSNDBUF   _IOW('T', 212, int)
+#define TUNATTACHFILTER _IOW('T', 213, struct sock_fprog)
+#define TUNDETACHFILTER _IOW('T', 214, struct sock_fprog)
+#define TUNGETVNETHDRSZ _IOR('T', 215, int)
+#define TUNSETVNETHDRSZ _IOW('T', 216, int)
+
+/* TUNSETIFF ifr flags */
+#define IFF_TUN		0x0001
+#define IFF_TAP		0x0002
+#define IFF_NO_PI	0x1000
+#define IFF_ONE_QUEUE	0x2000
+#define IFF_VNET_HDR	0x4000
+#define IFF_TUN_EXCL	0x8000
+
+/* Features for GSO (TUNSETOFFLOAD). */
+#define TUN_F_CSUM	0x01	/* You can hand me unchecksummed packets. */
+#define TUN_F_TSO4	0x02	/* I can handle TSO for IPv4 packets */
+#define TUN_F_TSO6	0x04	/* I can handle TSO for IPv6 packets */
+#define TUN_F_TSO_ECN	0x08	/* I can handle TSO with ECN bits. */
+#define TUN_F_UFO	0x10	/* I can handle UFO packets */
+
+/* Protocol info prepended to the packets (when IFF_NO_PI is not set) */
+#define TUN_PKT_STRIP	0x0001
+struct tun_pi {
+	__u16  flags;
+	__be16 proto;
+};
+
+/*
+ * Filter spec (used for SETXXFILTER ioctls)
+ * This stuff is applicable only to the TAP (Ethernet) devices.
+ * If the count is zero the filter is disabled and the driver accepts
+ * all packets (promisc mode).
+ * If the filter is enabled in order to accept broadcast packets
+ * broadcast addr must be explicitly included in the addr list.
+ */
+#define TUN_FLT_ALLMULTI 0x0001 /* Accept all multicast packets */
+struct tun_filter {
+	__u16  flags; /* TUN_FLT_ flags see above */
+	__u16  count; /* Number of addresses */
+	__u8   addr[0][ETH_ALEN];
+};
+
+#ifdef __KERNEL__
+#if defined(CONFIG_TUN) || defined(CONFIG_TUN_MODULE)
+struct socket *tun_get_socket(struct file *);
+#else
+#include <linux/err.h>
+#include <linux/errno.h>
+struct file;
+struct socket;
+static inline struct socket *tun_get_socket(struct file *f)
+{
+	return ERR_PTR(-EINVAL);
+}
+#endif /* CONFIG_TUN */
+#endif /* __KERNEL__ */
+#endif /* __IF_TUN_H */
diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h
new file mode 100644
index 00000000..16b92d00
--- /dev/null
+++ b/include/linux/if_tunnel.h
@@ -0,0 +1,83 @@
+#ifndef _IF_TUNNEL_H_
+#define _IF_TUNNEL_H_
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#ifdef __KERNEL__
+#include <linux/ip.h>
+#include <linux/in6.h>
+#endif
+
+#define SIOCGETTUNNEL   (SIOCDEVPRIVATE + 0)
+#define SIOCADDTUNNEL   (SIOCDEVPRIVATE + 1)
+#define SIOCDELTUNNEL   (SIOCDEVPRIVATE + 2)
+#define SIOCCHGTUNNEL   (SIOCDEVPRIVATE + 3)
+#define SIOCGETPRL      (SIOCDEVPRIVATE + 4)
+#define SIOCADDPRL      (SIOCDEVPRIVATE + 5)
+#define SIOCDELPRL      (SIOCDEVPRIVATE + 6)
+#define SIOCCHGPRL      (SIOCDEVPRIVATE + 7)
+#define SIOCGET6RD      (SIOCDEVPRIVATE + 8)
+#define SIOCADD6RD      (SIOCDEVPRIVATE + 9)
+#define SIOCDEL6RD      (SIOCDEVPRIVATE + 10)
+#define SIOCCHG6RD      (SIOCDEVPRIVATE + 11)
+
+#define GRE_CSUM	__cpu_to_be16(0x8000)
+#define GRE_ROUTING	__cpu_to_be16(0x4000)
+#define GRE_KEY		__cpu_to_be16(0x2000)
+#define GRE_SEQ		__cpu_to_be16(0x1000)
+#define GRE_STRICT	__cpu_to_be16(0x0800)
+#define GRE_REC		__cpu_to_be16(0x0700)
+#define GRE_FLAGS	__cpu_to_be16(0x00F8)
+#define GRE_VERSION	__cpu_to_be16(0x0007)
+
+struct ip_tunnel_parm {
+	char			name[IFNAMSIZ];
+	int			link;
+	__be16			i_flags;
+	__be16			o_flags;
+	__be32			i_key;
+	__be32			o_key;
+	struct iphdr		iph;
+};
+
+/* SIT-mode i_flags */
+#define	SIT_ISATAP	0x0001
+
+struct ip_tunnel_prl {
+	__be32			addr;
+	__u16			flags;
+	__u16			__reserved;
+	__u32			datalen;
+	__u32			__reserved2;
+	/* data follows */
+};
+
+/* PRL flags */
+#define	PRL_DEFAULT		0x0001
+
+struct ip_tunnel_6rd {
+	struct in6_addr		prefix;
+	__be32			relay_prefix;
+	__u16			prefixlen;
+	__u16			relay_prefixlen;
+};
+
+enum {
+	IFLA_GRE_UNSPEC,
+	IFLA_GRE_LINK,
+	IFLA_GRE_IFLAGS,
+	IFLA_GRE_OFLAGS,
+	IFLA_GRE_IKEY,
+	IFLA_GRE_OKEY,
+	IFLA_GRE_LOCAL,
+	IFLA_GRE_REMOTE,
+	IFLA_GRE_TTL,
+	IFLA_GRE_TOS,
+	IFLA_GRE_PMTUDISC,
+	__IFLA_GRE_MAX,
+};
+
+#define IFLA_GRE_MAX	(__IFLA_GRE_MAX - 1)
+
+#endif /* _IF_TUNNEL_H_ */
diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h
new file mode 100644
index 00000000..a810987c
--- /dev/null
+++ b/include/linux/if_vlan.h
@@ -0,0 +1,407 @@
+/*
+ * VLAN		An implementation of 802.1Q VLAN tagging.
+ *
+ * Authors:	Ben Greear <greearb@candelatech.com>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef _LINUX_IF_VLAN_H_
+#define _LINUX_IF_VLAN_H_
+
+#ifdef __KERNEL__
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/rtnetlink.h>
+#include <linux/bug.h>
+
+#define VLAN_HLEN	4		/* The additional bytes required by VLAN
+					 * (in addition to the Ethernet header)
+					 */
+#define VLAN_ETH_HLEN	18		/* Total octets in header.	 */
+#define VLAN_ETH_ZLEN	64		/* Min. octets in frame sans FCS */
+
+/*
+ * According to 802.3ac, the packet can be 4 bytes longer. --Klika Jan
+ */
+#define VLAN_ETH_DATA_LEN	1500	/* Max. octets in payload	 */
+#define VLAN_ETH_FRAME_LEN	1518	/* Max. octets in frame sans FCS */
+
+/*
+ * 	struct vlan_hdr - vlan header
+ * 	@h_vlan_TCI: priority and VLAN ID
+ *	@h_vlan_encapsulated_proto: packet type ID or len
+ */
+struct vlan_hdr {
+	__be16	h_vlan_TCI;
+	__be16	h_vlan_encapsulated_proto;
+};
+
+/**
+ *	struct vlan_ethhdr - vlan ethernet header (ethhdr + vlan_hdr)
+ *	@h_dest: destination ethernet address
+ *	@h_source: source ethernet address
+ *	@h_vlan_proto: ethernet protocol (always 0x8100)
+ *	@h_vlan_TCI: priority and VLAN ID
+ *	@h_vlan_encapsulated_proto: packet type ID or len
+ */
+struct vlan_ethhdr {
+	unsigned char	h_dest[ETH_ALEN];
+	unsigned char	h_source[ETH_ALEN];
+	__be16		h_vlan_proto;
+	__be16		h_vlan_TCI;
+	__be16		h_vlan_encapsulated_proto;
+};
+
+#include <linux/skbuff.h>
+
+static inline struct vlan_ethhdr *vlan_eth_hdr(const struct sk_buff *skb)
+{
+	return (struct vlan_ethhdr *)skb_mac_header(skb);
+}
+
+#define VLAN_PRIO_MASK		0xe000 /* Priority Code Point */
+#define VLAN_PRIO_SHIFT		13
+#define VLAN_CFI_MASK		0x1000 /* Canonical Format Indicator */
+#define VLAN_TAG_PRESENT	VLAN_CFI_MASK
+#define VLAN_VID_MASK		0x0fff /* VLAN Identifier */
+#define VLAN_N_VID		4096
+
+/* found in socket.c */
+extern void vlan_ioctl_set(int (*hook)(struct net *, void __user *));
+
+struct vlan_info;
+
+static inline int is_vlan_dev(struct net_device *dev)
+{
+        return dev->priv_flags & IFF_802_1Q_VLAN;
+}
+
+#define vlan_tx_tag_present(__skb)	((__skb)->vlan_tci & VLAN_TAG_PRESENT)
+#define vlan_tx_tag_get(__skb)		((__skb)->vlan_tci & ~VLAN_TAG_PRESENT)
+
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+
+extern struct net_device *__vlan_find_dev_deep(struct net_device *real_dev,
+					       u16 vlan_id);
+extern struct net_device *vlan_dev_real_dev(const struct net_device *dev);
+extern u16 vlan_dev_vlan_id(const struct net_device *dev);
+
+extern bool vlan_do_receive(struct sk_buff **skb, bool last_handler);
+extern struct sk_buff *vlan_untag(struct sk_buff *skb);
+
+extern int vlan_vid_add(struct net_device *dev, unsigned short vid);
+extern void vlan_vid_del(struct net_device *dev, unsigned short vid);
+
+extern int vlan_vids_add_by_dev(struct net_device *dev,
+				const struct net_device *by_dev);
+extern void vlan_vids_del_by_dev(struct net_device *dev,
+				 const struct net_device *by_dev);
+#else
+static inline struct net_device *
+__vlan_find_dev_deep(struct net_device *real_dev, u16 vlan_id)
+{
+	return NULL;
+}
+
+static inline struct net_device *vlan_dev_real_dev(const struct net_device *dev)
+{
+	BUG();
+	return NULL;
+}
+
+static inline u16 vlan_dev_vlan_id(const struct net_device *dev)
+{
+	BUG();
+	return 0;
+}
+
+static inline bool vlan_do_receive(struct sk_buff **skb, bool last_handler)
+{
+	if (((*skb)->vlan_tci & VLAN_VID_MASK) && last_handler)
+		(*skb)->pkt_type = PACKET_OTHERHOST;
+	return false;
+}
+
+static inline struct sk_buff *vlan_untag(struct sk_buff *skb)
+{
+	return skb;
+}
+
+static inline int vlan_vid_add(struct net_device *dev, unsigned short vid)
+{
+	return 0;
+}
+
+static inline void vlan_vid_del(struct net_device *dev, unsigned short vid)
+{
+}
+
+static inline int vlan_vids_add_by_dev(struct net_device *dev,
+				       const struct net_device *by_dev)
+{
+	return 0;
+}
+
+static inline void vlan_vids_del_by_dev(struct net_device *dev,
+					const struct net_device *by_dev)
+{
+}
+#endif
+
+/**
+ * vlan_insert_tag - regular VLAN tag inserting
+ * @skb: skbuff to tag
+ * @vlan_tci: VLAN TCI to insert
+ *
+ * Inserts the VLAN tag into @skb as part of the payload
+ * Returns a VLAN tagged skb. If a new skb is created, @skb is freed.
+ *
+ * Following the skb_unshare() example, in case of error, the calling function
+ * doesn't have to worry about freeing the original skb.
+ *
+ * Does not change skb->protocol so this function can be used during receive.
+ */
+static inline struct sk_buff *vlan_insert_tag(struct sk_buff *skb, u16 vlan_tci)
+{
+	struct vlan_ethhdr *veth;
+
+	if (skb_cow_head(skb, VLAN_HLEN) < 0) {
+		kfree_skb(skb);
+		return NULL;
+	}
+	veth = (struct vlan_ethhdr *)skb_push(skb, VLAN_HLEN);
+
+	/* Move the mac addresses to the beginning of the new header. */
+	memmove(skb->data, skb->data + VLAN_HLEN, 2 * ETH_ALEN);
+	skb->mac_header -= VLAN_HLEN;
+
+	/* first, the ethernet type */
+	veth->h_vlan_proto = htons(ETH_P_8021Q);
+
+	/* now, the TCI */
+	veth->h_vlan_TCI = htons(vlan_tci);
+
+	return skb;
+}
+
+/**
+ * __vlan_put_tag - regular VLAN tag inserting
+ * @skb: skbuff to tag
+ * @vlan_tci: VLAN TCI to insert
+ *
+ * Inserts the VLAN tag into @skb as part of the payload
+ * Returns a VLAN tagged skb. If a new skb is created, @skb is freed.
+ *
+ * Following the skb_unshare() example, in case of error, the calling function
+ * doesn't have to worry about freeing the original skb.
+ */
+static inline struct sk_buff *__vlan_put_tag(struct sk_buff *skb, u16 vlan_tci)
+{
+	skb = vlan_insert_tag(skb, vlan_tci);
+	if (skb)
+		skb->protocol = htons(ETH_P_8021Q);
+	return skb;
+}
+
+/**
+ * __vlan_hwaccel_put_tag - hardware accelerated VLAN inserting
+ * @skb: skbuff to tag
+ * @vlan_tci: VLAN TCI to insert
+ *
+ * Puts the VLAN TCI in @skb->vlan_tci and lets the device do the rest
+ */
+static inline struct sk_buff *__vlan_hwaccel_put_tag(struct sk_buff *skb,
+						     u16 vlan_tci)
+{
+	skb->vlan_tci = VLAN_TAG_PRESENT | vlan_tci;
+	return skb;
+}
+
+#define HAVE_VLAN_PUT_TAG
+
+/**
+ * vlan_put_tag - inserts VLAN tag according to device features
+ * @skb: skbuff to tag
+ * @vlan_tci: VLAN TCI to insert
+ *
+ * Assumes skb->dev is the target that will xmit this frame.
+ * Returns a VLAN tagged skb.
+ */
+static inline struct sk_buff *vlan_put_tag(struct sk_buff *skb, u16 vlan_tci)
+{
+	if (skb->dev->features & NETIF_F_HW_VLAN_TX) {
+		return __vlan_hwaccel_put_tag(skb, vlan_tci);
+	} else {
+		return __vlan_put_tag(skb, vlan_tci);
+	}
+}
+
+/**
+ * __vlan_get_tag - get the VLAN ID that is part of the payload
+ * @skb: skbuff to query
+ * @vlan_tci: buffer to store vlaue
+ *
+ * Returns error if the skb is not of VLAN type
+ */
+static inline int __vlan_get_tag(const struct sk_buff *skb, u16 *vlan_tci)
+{
+	struct vlan_ethhdr *veth = (struct vlan_ethhdr *)skb->data;
+
+	if (veth->h_vlan_proto != htons(ETH_P_8021Q)) {
+		return -EINVAL;
+	}
+
+	*vlan_tci = ntohs(veth->h_vlan_TCI);
+	return 0;
+}
+
+/**
+ * __vlan_hwaccel_get_tag - get the VLAN ID that is in @skb->cb[]
+ * @skb: skbuff to query
+ * @vlan_tci: buffer to store vlaue
+ *
+ * Returns error if @skb->vlan_tci is not set correctly
+ */
+static inline int __vlan_hwaccel_get_tag(const struct sk_buff *skb,
+					 u16 *vlan_tci)
+{
+	if (vlan_tx_tag_present(skb)) {
+		*vlan_tci = vlan_tx_tag_get(skb);
+		return 0;
+	} else {
+		*vlan_tci = 0;
+		return -EINVAL;
+	}
+}
+
+#define HAVE_VLAN_GET_TAG
+
+/**
+ * vlan_get_tag - get the VLAN ID from the skb
+ * @skb: skbuff to query
+ * @vlan_tci: buffer to store vlaue
+ *
+ * Returns error if the skb is not VLAN tagged
+ */
+static inline int vlan_get_tag(const struct sk_buff *skb, u16 *vlan_tci)
+{
+	if (skb->dev->features & NETIF_F_HW_VLAN_TX) {
+		return __vlan_hwaccel_get_tag(skb, vlan_tci);
+	} else {
+		return __vlan_get_tag(skb, vlan_tci);
+	}
+}
+
+/**
+ * vlan_get_protocol - get protocol EtherType.
+ * @skb: skbuff to query
+ *
+ * Returns the EtherType of the packet, regardless of whether it is
+ * vlan encapsulated (normal or hardware accelerated) or not.
+ */
+static inline __be16 vlan_get_protocol(const struct sk_buff *skb)
+{
+	__be16 protocol = 0;
+
+	if (vlan_tx_tag_present(skb) ||
+	     skb->protocol != cpu_to_be16(ETH_P_8021Q))
+		protocol = skb->protocol;
+	else {
+		__be16 proto, *protop;
+		protop = skb_header_pointer(skb, offsetof(struct vlan_ethhdr,
+						h_vlan_encapsulated_proto),
+						sizeof(proto), &proto);
+		if (likely(protop))
+			protocol = *protop;
+	}
+
+	return protocol;
+}
+
+static inline void vlan_set_encap_proto(struct sk_buff *skb,
+					struct vlan_hdr *vhdr)
+{
+	__be16 proto;
+	unsigned char *rawp;
+
+	/*
+	 * Was a VLAN packet, grab the encapsulated protocol, which the layer
+	 * three protocols care about.
+	 */
+
+	proto = vhdr->h_vlan_encapsulated_proto;
+	if (ntohs(proto) >= 1536) {
+		skb->protocol = proto;
+		return;
+	}
+
+	rawp = skb->data;
+	if (*(unsigned short *) rawp == 0xFFFF)
+		/*
+		 * This is a magic hack to spot IPX packets. Older Novell
+		 * breaks the protocol design and runs IPX over 802.3 without
+		 * an 802.2 LLC layer. We look for FFFF which isn't a used
+		 * 802.2 SSAP/DSAP. This won't work for fault tolerant netware
+		 * but does for the rest.
+		 */
+		skb->protocol = htons(ETH_P_802_3);
+	else
+		/*
+		 * Real 802.2 LLC
+		 */
+		skb->protocol = htons(ETH_P_802_2);
+}
+#endif /* __KERNEL__ */
+
+/* VLAN IOCTLs are found in sockios.h */
+
+/* Passed in vlan_ioctl_args structure to determine behaviour. */
+enum vlan_ioctl_cmds {
+	ADD_VLAN_CMD,
+	DEL_VLAN_CMD,
+	SET_VLAN_INGRESS_PRIORITY_CMD,
+	SET_VLAN_EGRESS_PRIORITY_CMD,
+	GET_VLAN_INGRESS_PRIORITY_CMD,
+	GET_VLAN_EGRESS_PRIORITY_CMD,
+	SET_VLAN_NAME_TYPE_CMD,
+	SET_VLAN_FLAG_CMD,
+	GET_VLAN_REALDEV_NAME_CMD, /* If this works, you know it's a VLAN device, btw */
+	GET_VLAN_VID_CMD /* Get the VID of this VLAN (specified by name) */
+};
+
+enum vlan_flags {
+	VLAN_FLAG_REORDER_HDR	= 0x1,
+	VLAN_FLAG_GVRP		= 0x2,
+	VLAN_FLAG_LOOSE_BINDING	= 0x4,
+};
+
+enum vlan_name_types {
+	VLAN_NAME_TYPE_PLUS_VID, /* Name will look like:  vlan0005 */
+	VLAN_NAME_TYPE_RAW_PLUS_VID, /* name will look like:  eth1.0005 */
+	VLAN_NAME_TYPE_PLUS_VID_NO_PAD, /* Name will look like:  vlan5 */
+	VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD, /* Name will look like:  eth0.5 */
+	VLAN_NAME_TYPE_HIGHEST
+};
+
+struct vlan_ioctl_args {
+	int cmd; /* Should be one of the vlan_ioctl_cmds enum above. */
+	char device1[24];
+
+        union {
+		char device2[24];
+		int VID;
+		unsigned int skb_priority;
+		unsigned int name_type;
+		unsigned int bind_type;
+		unsigned int flag; /* Matches vlan_dev_priv flags */
+        } u;
+
+	short vlan_qos;   
+};
+
+#endif /* !(_LINUX_IF_VLAN_H_) */
diff --git a/include/linux/if_x25.h b/include/linux/if_x25.h
new file mode 100644
index 00000000..897765f5
--- /dev/null
+++ b/include/linux/if_x25.h
@@ -0,0 +1,26 @@
+/*
+ *  Linux X.25 packet to device interface
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *  GNU General Public License for more details.
+ */
+
+#ifndef _IF_X25_H
+#define _IF_X25_H
+
+#include <linux/types.h>
+
+/* Documentation/networking/x25-iface.txt */
+#define X25_IFACE_DATA		0x00
+#define X25_IFACE_CONNECT	0x01
+#define X25_IFACE_DISCONNECT	0x02
+#define X25_IFACE_PARAMS	0x03
+
+#endif /* _IF_X25_H */
diff --git a/include/linux/igmp.h b/include/linux/igmp.h
new file mode 100644
index 00000000..82de336b
--- /dev/null
+++ b/include/linux/igmp.h
@@ -0,0 +1,244 @@
+/*
+ *	Linux NET3:	Internet Group Management Protocol  [IGMP]
+ *
+ *	Authors:
+ *		Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *
+ *	Extended to talk the BSD extended IGMP protocol of mrouted 3.6
+ *
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_IGMP_H
+#define _LINUX_IGMP_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/*
+ *	IGMP protocol structures
+ */
+
+/*
+ *	Header in on cable format
+ */
+
+struct igmphdr {
+	__u8 type;
+	__u8 code;		/* For newer IGMP */
+	__sum16 csum;
+	__be32 group;
+};
+
+/* V3 group record types [grec_type] */
+#define IGMPV3_MODE_IS_INCLUDE		1
+#define IGMPV3_MODE_IS_EXCLUDE		2
+#define IGMPV3_CHANGE_TO_INCLUDE	3
+#define IGMPV3_CHANGE_TO_EXCLUDE	4
+#define IGMPV3_ALLOW_NEW_SOURCES	5
+#define IGMPV3_BLOCK_OLD_SOURCES	6
+
+struct igmpv3_grec {
+	__u8	grec_type;
+	__u8	grec_auxwords;
+	__be16	grec_nsrcs;
+	__be32	grec_mca;
+	__be32	grec_src[0];
+};
+
+struct igmpv3_report {
+	__u8 type;
+	__u8 resv1;
+	__be16 csum;
+	__be16 resv2;
+	__be16 ngrec;
+	struct igmpv3_grec grec[0];
+};
+
+struct igmpv3_query {
+	__u8 type;
+	__u8 code;
+	__be16 csum;
+	__be32 group;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 qrv:3,
+	     suppress:1,
+	     resv:4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u8 resv:4,
+	     suppress:1,
+	     qrv:3;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+	__u8 qqic;
+	__be16 nsrcs;
+	__be32 srcs[0];
+};
+
+#define IGMP_HOST_MEMBERSHIP_QUERY	0x11	/* From RFC1112 */
+#define IGMP_HOST_MEMBERSHIP_REPORT	0x12	/* Ditto */
+#define IGMP_DVMRP			0x13	/* DVMRP routing */
+#define IGMP_PIM			0x14	/* PIM routing */
+#define IGMP_TRACE			0x15
+#define IGMPV2_HOST_MEMBERSHIP_REPORT	0x16	/* V2 version of 0x12 */
+#define IGMP_HOST_LEAVE_MESSAGE 	0x17
+#define IGMPV3_HOST_MEMBERSHIP_REPORT	0x22	/* V3 version of 0x12 */
+
+#define IGMP_MTRACE_RESP		0x1e
+#define IGMP_MTRACE			0x1f
+
+
+/*
+ *	Use the BSD names for these for compatibility
+ */
+
+#define IGMP_DELAYING_MEMBER		0x01
+#define IGMP_IDLE_MEMBER		0x02
+#define IGMP_LAZY_MEMBER		0x03
+#define IGMP_SLEEPING_MEMBER		0x04
+#define IGMP_AWAKENING_MEMBER		0x05
+
+#define IGMP_MINLEN			8
+
+#define IGMP_MAX_HOST_REPORT_DELAY	10	/* max delay for response to */
+						/* query (in seconds)	*/
+
+#define IGMP_TIMER_SCALE		10	/* denotes that the igmphdr->timer field */
+						/* specifies time in 10th of seconds	 */
+
+#define IGMP_AGE_THRESHOLD		400	/* If this host don't hear any IGMP V1	*/
+						/* message in this period of time,	*/
+						/* revert to IGMP v2 router.		*/
+
+#define IGMP_ALL_HOSTS		htonl(0xE0000001L)
+#define IGMP_ALL_ROUTER 	htonl(0xE0000002L)
+#define IGMPV3_ALL_MCR	 	htonl(0xE0000016L)
+#define IGMP_LOCAL_GROUP	htonl(0xE0000000L)
+#define IGMP_LOCAL_GROUP_MASK	htonl(0xFFFFFF00L)
+
+/*
+ * struct for keeping the multicast list in
+ */
+
+#ifdef __KERNEL__
+#include <linux/skbuff.h>
+#include <linux/timer.h>
+#include <linux/in.h>
+
+static inline struct igmphdr *igmp_hdr(const struct sk_buff *skb)
+{
+	return (struct igmphdr *)skb_transport_header(skb);
+}
+
+static inline struct igmpv3_report *
+			igmpv3_report_hdr(const struct sk_buff *skb)
+{
+	return (struct igmpv3_report *)skb_transport_header(skb);
+}
+
+static inline struct igmpv3_query *
+			igmpv3_query_hdr(const struct sk_buff *skb)
+{
+	return (struct igmpv3_query *)skb_transport_header(skb);
+}
+
+extern int sysctl_igmp_max_memberships;
+extern int sysctl_igmp_max_msf;
+
+struct ip_sf_socklist {
+	unsigned int		sl_max;
+	unsigned int		sl_count;
+	struct rcu_head		rcu;
+	__be32			sl_addr[0];
+};
+
+#define IP_SFLSIZE(count)	(sizeof(struct ip_sf_socklist) + \
+	(count) * sizeof(__be32))
+
+#define IP_SFBLOCK	10	/* allocate this many at once */
+
+/* ip_mc_socklist is real list now. Speed is not argument;
+   this list never used in fast path code
+ */
+
+struct ip_mc_socklist {
+	struct ip_mc_socklist __rcu *next_rcu;
+	struct ip_mreqn		multi;
+	unsigned int		sfmode;		/* MCAST_{INCLUDE,EXCLUDE} */
+	struct ip_sf_socklist __rcu	*sflist;
+	struct rcu_head		rcu;
+};
+
+struct ip_sf_list {
+	struct ip_sf_list	*sf_next;
+	__be32			sf_inaddr;
+	unsigned long		sf_count[2];	/* include/exclude counts */
+	unsigned char		sf_gsresp;	/* include in g & s response? */
+	unsigned char		sf_oldin;	/* change state */
+	unsigned char		sf_crcount;	/* retrans. left to send */
+};
+
+struct ip_mc_list {
+	struct in_device	*interface;
+	__be32			multiaddr;
+	unsigned int		sfmode;
+	struct ip_sf_list	*sources;
+	struct ip_sf_list	*tomb;
+	unsigned long		sfcount[2];
+	union {
+		struct ip_mc_list *next;
+		struct ip_mc_list __rcu *next_rcu;
+	};
+	struct timer_list	timer;
+	int			users;
+	atomic_t		refcnt;
+	spinlock_t		lock;
+	char			tm_running;
+	char			reporter;
+	char			unsolicit_count;
+	char			loaded;
+	unsigned char		gsquery;	/* check source marks? */
+	unsigned char		crcount;
+	struct rcu_head		rcu;
+};
+
+/* V3 exponential field decoding */
+#define IGMPV3_MASK(value, nb) ((nb)>=32 ? (value) : ((1<<(nb))-1) & (value))
+#define IGMPV3_EXP(thresh, nbmant, nbexp, value) \
+	((value) < (thresh) ? (value) : \
+        ((IGMPV3_MASK(value, nbmant) | (1<<(nbmant))) << \
+         (IGMPV3_MASK((value) >> (nbmant), nbexp) + (nbexp))))
+
+#define IGMPV3_QQIC(value) IGMPV3_EXP(0x80, 4, 3, value)
+#define IGMPV3_MRC(value) IGMPV3_EXP(0x80, 4, 3, value)
+
+extern int ip_check_mc_rcu(struct in_device *dev, __be32 mc_addr, __be32 src_addr, u16 proto);
+extern int igmp_rcv(struct sk_buff *);
+extern int ip_mc_join_group(struct sock *sk, struct ip_mreqn *imr);
+extern int ip_mc_leave_group(struct sock *sk, struct ip_mreqn *imr);
+extern void ip_mc_drop_socket(struct sock *sk);
+extern int ip_mc_source(int add, int omode, struct sock *sk,
+		struct ip_mreq_source *mreqs, int ifindex);
+extern int ip_mc_msfilter(struct sock *sk, struct ip_msfilter *msf,int ifindex);
+extern int ip_mc_msfget(struct sock *sk, struct ip_msfilter *msf,
+		struct ip_msfilter __user *optval, int __user *optlen);
+extern int ip_mc_gsfget(struct sock *sk, struct group_filter *gsf,
+		struct group_filter __user *optval, int __user *optlen);
+extern int ip_mc_sf_allow(struct sock *sk, __be32 local, __be32 rmt, int dif);
+extern void ip_mc_init_dev(struct in_device *);
+extern void ip_mc_destroy_dev(struct in_device *);
+extern void ip_mc_up(struct in_device *);
+extern void ip_mc_down(struct in_device *);
+extern void ip_mc_unmap(struct in_device *);
+extern void ip_mc_remap(struct in_device *);
+extern void ip_mc_dec_group(struct in_device *in_dev, __be32 addr);
+extern void ip_mc_inc_group(struct in_device *in_dev, __be32 addr);
+extern void ip_mc_rejoin_groups(struct in_device *in_dev);
+
+#endif
+#endif
diff --git a/include/linux/ihex.h b/include/linux/ihex.h
new file mode 100644
index 00000000..31d8629e
--- /dev/null
+++ b/include/linux/ihex.h
@@ -0,0 +1,74 @@
+/*
+ * Compact binary representation of ihex records. Some devices need their
+ * firmware loaded in strange orders rather than a single big blob, but
+ * actually parsing ihex-as-text within the kernel seems silly. Thus,...
+ */
+
+#ifndef __LINUX_IHEX_H__
+#define __LINUX_IHEX_H__
+
+#include <linux/types.h>
+#include <linux/firmware.h>
+#include <linux/device.h>
+
+/* Intel HEX files actually limit the length to 256 bytes, but we have
+   drivers which would benefit from using separate records which are
+   longer than that, so we extend to 16 bits of length */
+struct ihex_binrec {
+	__be32 addr;
+	__be16 len;
+	uint8_t data[0];
+} __attribute__((packed));
+
+/* Find the next record, taking into account the 4-byte alignment */
+static inline const struct ihex_binrec *
+ihex_next_binrec(const struct ihex_binrec *rec)
+{
+	int next = ((be16_to_cpu(rec->len) + 5) & ~3) - 2;
+	rec = (void *)&rec->data[next];
+
+	return be16_to_cpu(rec->len) ? rec : NULL;
+}
+
+/* Check that ihex_next_binrec() won't take us off the end of the image... */
+static inline int ihex_validate_fw(const struct firmware *fw)
+{
+	const struct ihex_binrec *rec;
+	size_t ofs = 0;
+
+	while (ofs <= fw->size - sizeof(*rec)) {
+		rec = (void *)&fw->data[ofs];
+
+		/* Zero length marks end of records */
+		if (!be16_to_cpu(rec->len))
+			return 0;
+
+		/* Point to next record... */
+		ofs += (sizeof(*rec) + be16_to_cpu(rec->len) + 3) & ~3;
+	}
+	return -EINVAL;
+}
+
+/* Request firmware and validate it so that we can trust we won't
+ * run off the end while reading records... */
+static inline int request_ihex_firmware(const struct firmware **fw,
+					const char *fw_name,
+					struct device *dev)
+{
+	const struct firmware *lfw;
+	int ret;
+
+	ret = request_firmware(&lfw, fw_name, dev);
+	if (ret)
+		return ret;
+	ret = ihex_validate_fw(lfw);
+	if (ret) {
+		dev_err(dev, "Firmware \"%s\" not valid IHEX records\n",
+			fw_name);
+		release_firmware(lfw);
+		return ret;
+	}
+	*fw = lfw;
+	return 0;
+}
+#endif /* __LINUX_IHEX_H__ */
diff --git a/include/linux/ima.h b/include/linux/ima.h
new file mode 100644
index 00000000..6ac8e50c
--- /dev/null
+++ b/include/linux/ima.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2008 IBM Corporation
+ * Author: Mimi Zohar <zohar@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, version 2 of the License.
+ */
+
+#ifndef _LINUX_IMA_H
+#define _LINUX_IMA_H
+
+#include <linux/fs.h>
+struct linux_binprm;
+
+#ifdef CONFIG_IMA
+extern int ima_bprm_check(struct linux_binprm *bprm);
+extern int ima_file_check(struct file *file, int mask);
+extern void ima_file_free(struct file *file);
+extern int ima_file_mmap(struct file *file, unsigned long prot);
+
+#else
+static inline int ima_bprm_check(struct linux_binprm *bprm)
+{
+	return 0;
+}
+
+static inline int ima_file_check(struct file *file, int mask)
+{
+	return 0;
+}
+
+static inline void ima_file_free(struct file *file)
+{
+	return;
+}
+
+static inline int ima_file_mmap(struct file *file, unsigned long prot)
+{
+	return 0;
+}
+#endif /* CONFIG_IMA_H */
+#endif /* _LINUX_IMA_H */
diff --git a/include/linux/in.h b/include/linux/in.h
new file mode 100644
index 00000000..e0337f11
--- /dev/null
+++ b/include/linux/in.h
@@ -0,0 +1,337 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions of the Internet Protocol.
+ *
+ * Version:	@(#)in.h	1.0.1	04/21/93
+ *
+ * Authors:	Original taken from the GNU Project <netinet/in.h> file.
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_IN_H
+#define _LINUX_IN_H
+
+#include <linux/types.h>
+#include <linux/socket.h>
+
+/* Standard well-defined IP protocols.  */
+enum {
+  IPPROTO_IP = 0,		/* Dummy protocol for TCP		*/
+  IPPROTO_ICMP = 1,		/* Internet Control Message Protocol	*/
+  IPPROTO_IGMP = 2,		/* Internet Group Management Protocol	*/
+  IPPROTO_IPIP = 4,		/* IPIP tunnels (older KA9Q tunnels use 94) */
+  IPPROTO_TCP = 6,		/* Transmission Control Protocol	*/
+  IPPROTO_EGP = 8,		/* Exterior Gateway Protocol		*/
+  IPPROTO_PUP = 12,		/* PUP protocol				*/
+  IPPROTO_UDP = 17,		/* User Datagram Protocol		*/
+  IPPROTO_IDP = 22,		/* XNS IDP protocol			*/
+  IPPROTO_DCCP = 33,		/* Datagram Congestion Control Protocol */
+  IPPROTO_RSVP = 46,		/* RSVP protocol			*/
+  IPPROTO_GRE = 47,		/* Cisco GRE tunnels (rfc 1701,1702)	*/
+
+  IPPROTO_IPV6	 = 41,		/* IPv6-in-IPv4 tunnelling		*/
+
+  IPPROTO_ESP = 50,            /* Encapsulation Security Payload protocol */
+  IPPROTO_AH = 51,             /* Authentication Header protocol       */
+  IPPROTO_BEETPH = 94,	       /* IP option pseudo header for BEET */
+  IPPROTO_PIM    = 103,		/* Protocol Independent Multicast	*/
+
+  IPPROTO_COMP   = 108,                /* Compression Header protocol */
+  IPPROTO_SCTP   = 132,		/* Stream Control Transport Protocol	*/
+  IPPROTO_UDPLITE = 136,	/* UDP-Lite (RFC 3828)			*/
+
+  IPPROTO_RAW	 = 255,		/* Raw IP packets			*/
+  IPPROTO_MAX
+};
+
+
+/* Internet address. */
+struct in_addr {
+	__be32	s_addr;
+};
+
+#define IP_TOS		1
+#define IP_TTL		2
+#define IP_HDRINCL	3
+#define IP_OPTIONS	4
+#define IP_ROUTER_ALERT	5
+#define IP_RECVOPTS	6
+#define IP_RETOPTS	7
+#define IP_PKTINFO	8
+#define IP_PKTOPTIONS	9
+#define IP_MTU_DISCOVER	10
+#define IP_RECVERR	11
+#define IP_RECVTTL	12
+#define	IP_RECVTOS	13
+#define IP_MTU		14
+#define IP_FREEBIND	15
+#define IP_IPSEC_POLICY	16
+#define IP_XFRM_POLICY	17
+#define IP_PASSSEC	18
+#define IP_TRANSPARENT	19
+
+/* BSD compatibility */
+#define IP_RECVRETOPTS	IP_RETOPTS
+
+/* TProxy original addresses */
+#define IP_ORIGDSTADDR       20
+#define IP_RECVORIGDSTADDR   IP_ORIGDSTADDR
+
+#define IP_MINTTL       21
+#define IP_NODEFRAG     22
+
+/* IP_MTU_DISCOVER values */
+#define IP_PMTUDISC_DONT		0	/* Never send DF frames */
+#define IP_PMTUDISC_WANT		1	/* Use per route hints	*/
+#define IP_PMTUDISC_DO			2	/* Always DF		*/
+#define IP_PMTUDISC_PROBE		3       /* Ignore dst pmtu      */
+
+#define IP_MULTICAST_IF			32
+#define IP_MULTICAST_TTL 		33
+#define IP_MULTICAST_LOOP 		34
+#define IP_ADD_MEMBERSHIP		35
+#define IP_DROP_MEMBERSHIP		36
+#define IP_UNBLOCK_SOURCE		37
+#define IP_BLOCK_SOURCE			38
+#define IP_ADD_SOURCE_MEMBERSHIP	39
+#define IP_DROP_SOURCE_MEMBERSHIP	40
+#define IP_MSFILTER			41
+#define MCAST_JOIN_GROUP		42
+#define MCAST_BLOCK_SOURCE		43
+#define MCAST_UNBLOCK_SOURCE		44
+#define MCAST_LEAVE_GROUP		45
+#define MCAST_JOIN_SOURCE_GROUP		46
+#define MCAST_LEAVE_SOURCE_GROUP	47
+#define MCAST_MSFILTER			48
+#define IP_MULTICAST_ALL		49
+#define IP_UNICAST_IF			50
+
+#define MCAST_EXCLUDE	0
+#define MCAST_INCLUDE	1
+
+/* These need to appear somewhere around here */
+#define IP_DEFAULT_MULTICAST_TTL        1
+#define IP_DEFAULT_MULTICAST_LOOP       1
+
+/* Request struct for multicast socket ops */
+
+struct ip_mreq  {
+	struct in_addr imr_multiaddr;	/* IP multicast address of group */
+	struct in_addr imr_interface;	/* local IP address of interface */
+};
+
+struct ip_mreqn {
+	struct in_addr	imr_multiaddr;		/* IP multicast address of group */
+	struct in_addr	imr_address;		/* local IP address of interface */
+	int		imr_ifindex;		/* Interface index */
+};
+
+struct ip_mreq_source {
+	__be32		imr_multiaddr;
+	__be32		imr_interface;
+	__be32		imr_sourceaddr;
+};
+
+struct ip_msfilter {
+	__be32		imsf_multiaddr;
+	__be32		imsf_interface;
+	__u32		imsf_fmode;
+	__u32		imsf_numsrc;
+	__be32		imsf_slist[1];
+};
+
+#define IP_MSFILTER_SIZE(numsrc) \
+	(sizeof(struct ip_msfilter) - sizeof(__u32) \
+	+ (numsrc) * sizeof(__u32))
+
+struct group_req {
+	__u32				 gr_interface;	/* interface index */
+	struct __kernel_sockaddr_storage gr_group;	/* group address */
+};
+
+struct group_source_req {
+	__u32				 gsr_interface;	/* interface index */
+	struct __kernel_sockaddr_storage gsr_group;	/* group address */
+	struct __kernel_sockaddr_storage gsr_source;	/* source address */
+};
+
+struct group_filter {
+	__u32				 gf_interface;	/* interface index */
+	struct __kernel_sockaddr_storage gf_group;	/* multicast address */
+	__u32				 gf_fmode;	/* filter mode */
+	__u32				 gf_numsrc;	/* number of sources */
+	struct __kernel_sockaddr_storage gf_slist[1];	/* interface index */
+};
+
+#define GROUP_FILTER_SIZE(numsrc) \
+	(sizeof(struct group_filter) - sizeof(struct __kernel_sockaddr_storage) \
+	+ (numsrc) * sizeof(struct __kernel_sockaddr_storage))
+
+struct in_pktinfo {
+	int		ipi_ifindex;
+	struct in_addr	ipi_spec_dst;
+	struct in_addr	ipi_addr;
+};
+
+/* Structure describing an Internet (IP) socket address. */
+#define __SOCK_SIZE__	16		/* sizeof(struct sockaddr)	*/
+struct sockaddr_in {
+  __kernel_sa_family_t	sin_family;	/* Address family		*/
+  __be16		sin_port;	/* Port number			*/
+  struct in_addr	sin_addr;	/* Internet address		*/
+
+  /* Pad to size of `struct sockaddr'. */
+  unsigned char		__pad[__SOCK_SIZE__ - sizeof(short int) -
+			sizeof(unsigned short int) - sizeof(struct in_addr)];
+};
+#define sin_zero	__pad		/* for BSD UNIX comp. -FvK	*/
+
+
+/*
+ * Definitions of the bits in an Internet address integer.
+ * On subnets, host and network parts are found according
+ * to the subnet mask, not these masks.
+ */
+#define	IN_CLASSA(a)		((((long int) (a)) & 0x80000000) == 0)
+#define	IN_CLASSA_NET		0xff000000
+#define	IN_CLASSA_NSHIFT	24
+#define	IN_CLASSA_HOST		(0xffffffff & ~IN_CLASSA_NET)
+#define	IN_CLASSA_MAX		128
+
+#define	IN_CLASSB(a)		((((long int) (a)) & 0xc0000000) == 0x80000000)
+#define	IN_CLASSB_NET		0xffff0000
+#define	IN_CLASSB_NSHIFT	16
+#define	IN_CLASSB_HOST		(0xffffffff & ~IN_CLASSB_NET)
+#define	IN_CLASSB_MAX		65536
+
+#define	IN_CLASSC(a)		((((long int) (a)) & 0xe0000000) == 0xc0000000)
+#define	IN_CLASSC_NET		0xffffff00
+#define	IN_CLASSC_NSHIFT	8
+#define	IN_CLASSC_HOST		(0xffffffff & ~IN_CLASSC_NET)
+
+#define	IN_CLASSD(a)		((((long int) (a)) & 0xf0000000) == 0xe0000000)
+#define	IN_MULTICAST(a)		IN_CLASSD(a)
+#define IN_MULTICAST_NET	0xF0000000
+
+#define	IN_EXPERIMENTAL(a)	((((long int) (a)) & 0xf0000000) == 0xf0000000)
+#define	IN_BADCLASS(a)		IN_EXPERIMENTAL((a))
+
+/* Address to accept any incoming messages. */
+#define	INADDR_ANY		((unsigned long int) 0x00000000)
+
+/* Address to send to all hosts. */
+#define	INADDR_BROADCAST	((unsigned long int) 0xffffffff)
+
+/* Address indicating an error return. */
+#define	INADDR_NONE		((unsigned long int) 0xffffffff)
+
+/* Network number for local host loopback. */
+#define	IN_LOOPBACKNET		127
+
+/* Address to loopback in software to local host.  */
+#define	INADDR_LOOPBACK		0x7f000001	/* 127.0.0.1   */
+#define	IN_LOOPBACK(a)		((((long int) (a)) & 0xff000000) == 0x7f000000)
+
+/* Defines for Multicast INADDR */
+#define INADDR_UNSPEC_GROUP   	0xe0000000U	/* 224.0.0.0   */
+#define INADDR_ALLHOSTS_GROUP 	0xe0000001U	/* 224.0.0.1   */
+#define INADDR_ALLRTRS_GROUP    0xe0000002U	/* 224.0.0.2 */
+#define INADDR_MAX_LOCAL_GROUP  0xe00000ffU	/* 224.0.0.255 */
+
+
+/* <asm/byteorder.h> contains the htonl type stuff.. */
+#include <asm/byteorder.h> 
+
+#ifdef __KERNEL__
+
+#include <linux/errno.h>
+
+static inline int proto_ports_offset(int proto)
+{
+	switch (proto) {
+	case IPPROTO_TCP:
+	case IPPROTO_UDP:
+	case IPPROTO_DCCP:
+	case IPPROTO_ESP:	/* SPI */
+	case IPPROTO_SCTP:
+	case IPPROTO_UDPLITE:
+		return 0;
+	case IPPROTO_AH:	/* SPI */
+		return 4;
+	default:
+		return -EINVAL;
+	}
+}
+
+static inline bool ipv4_is_loopback(__be32 addr)
+{
+	return (addr & htonl(0xff000000)) == htonl(0x7f000000);
+}
+
+static inline bool ipv4_is_multicast(__be32 addr)
+{
+	return (addr & htonl(0xf0000000)) == htonl(0xe0000000);
+}
+
+static inline bool ipv4_is_local_multicast(__be32 addr)
+{
+	return (addr & htonl(0xffffff00)) == htonl(0xe0000000);
+}
+
+static inline bool ipv4_is_lbcast(__be32 addr)
+{
+	/* limited broadcast */
+	return addr == htonl(INADDR_BROADCAST);
+}
+
+static inline bool ipv4_is_zeronet(__be32 addr)
+{
+	return (addr & htonl(0xff000000)) == htonl(0x00000000);
+}
+
+/* Special-Use IPv4 Addresses (RFC3330) */
+
+static inline bool ipv4_is_private_10(__be32 addr)
+{
+	return (addr & htonl(0xff000000)) == htonl(0x0a000000);
+}
+
+static inline bool ipv4_is_private_172(__be32 addr)
+{
+	return (addr & htonl(0xfff00000)) == htonl(0xac100000);
+}
+
+static inline bool ipv4_is_private_192(__be32 addr)
+{
+	return (addr & htonl(0xffff0000)) == htonl(0xc0a80000);
+}
+
+static inline bool ipv4_is_linklocal_169(__be32 addr)
+{
+	return (addr & htonl(0xffff0000)) == htonl(0xa9fe0000);
+}
+
+static inline bool ipv4_is_anycast_6to4(__be32 addr)
+{
+	return (addr & htonl(0xffffff00)) == htonl(0xc0586300);
+}
+
+static inline bool ipv4_is_test_192(__be32 addr)
+{
+	return (addr & htonl(0xffffff00)) == htonl(0xc0000200);
+}
+
+static inline bool ipv4_is_test_198(__be32 addr)
+{
+	return (addr & htonl(0xfffe0000)) == htonl(0xc6120000);
+}
+#endif
+
+#endif	/* _LINUX_IN_H */
diff --git a/include/linux/in6.h b/include/linux/in6.h
new file mode 100644
index 00000000..5c83d9e3
--- /dev/null
+++ b/include/linux/in6.h
@@ -0,0 +1,291 @@
+/*
+ *	Types and definitions for AF_INET6 
+ *	Linux INET6 implementation 
+ *
+ *	Authors:
+ *	Pedro Roque		<roque@di.fc.ul.pt>	
+ *
+ *	Sources:
+ *	IPv6 Program Interfaces for BSD Systems
+ *      <draft-ietf-ipngwg-bsd-api-05.txt>
+ *
+ *	Advanced Sockets API for IPv6
+ *	<draft-stevens-advanced-api-00.txt>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_IN6_H
+#define _LINUX_IN6_H
+
+#include <linux/types.h>
+
+/*
+ *	IPv6 address structure
+ */
+
+struct in6_addr {
+	union {
+		__u8		u6_addr8[16];
+		__be16		u6_addr16[8];
+		__be32		u6_addr32[4];
+	} in6_u;
+#define s6_addr			in6_u.u6_addr8
+#define s6_addr16		in6_u.u6_addr16
+#define s6_addr32		in6_u.u6_addr32
+};
+
+/* IPv6 Wildcard Address (::) and Loopback Address (::1) defined in RFC2553
+ * NOTE: Be aware the IN6ADDR_* constants and in6addr_* externals are defined
+ * in network byte order, not in host byte order as are the IPv4 equivalents
+ */
+#ifdef __KERNEL__
+extern const struct in6_addr in6addr_any;
+#define IN6ADDR_ANY_INIT { { { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } } }
+extern const struct in6_addr in6addr_loopback;
+#define IN6ADDR_LOOPBACK_INIT { { { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1 } } }
+extern const struct in6_addr in6addr_linklocal_allnodes;
+#define IN6ADDR_LINKLOCAL_ALLNODES_INIT	\
+		{ { { 0xff,2,0,0,0,0,0,0,0,0,0,0,0,0,0,1 } } }
+extern const struct in6_addr in6addr_linklocal_allrouters;
+#define IN6ADDR_LINKLOCAL_ALLROUTERS_INIT \
+		{ { { 0xff,2,0,0,0,0,0,0,0,0,0,0,0,0,0,2 } } }
+#endif
+
+struct sockaddr_in6 {
+	unsigned short int	sin6_family;    /* AF_INET6 */
+	__be16			sin6_port;      /* Transport layer port # */
+	__be32			sin6_flowinfo;  /* IPv6 flow information */
+	struct in6_addr		sin6_addr;      /* IPv6 address */
+	__u32			sin6_scope_id;  /* scope id (new in RFC2553) */
+};
+
+struct ipv6_mreq {
+	/* IPv6 multicast address of group */
+	struct in6_addr ipv6mr_multiaddr;
+
+	/* local IPv6 address of interface */
+	int		ipv6mr_ifindex;
+};
+
+#define ipv6mr_acaddr	ipv6mr_multiaddr
+
+struct in6_flowlabel_req {
+	struct in6_addr	flr_dst;
+	__be32	flr_label;
+	__u8	flr_action;
+	__u8	flr_share;
+	__u16	flr_flags;
+	__u16 	flr_expires;
+	__u16	flr_linger;
+	__u32	__flr_pad;
+	/* Options in format of IPV6_PKTOPTIONS */
+};
+
+#define IPV6_FL_A_GET	0
+#define IPV6_FL_A_PUT	1
+#define IPV6_FL_A_RENEW	2
+
+#define IPV6_FL_F_CREATE	1
+#define IPV6_FL_F_EXCL		2
+
+#define IPV6_FL_S_NONE		0
+#define IPV6_FL_S_EXCL		1
+#define IPV6_FL_S_PROCESS	2
+#define IPV6_FL_S_USER		3
+#define IPV6_FL_S_ANY		255
+
+
+/*
+ *	Bitmask constant declarations to help applications select out the 
+ *	flow label and priority fields.
+ *
+ *	Note that this are in host byte order while the flowinfo field of
+ *	sockaddr_in6 is in network byte order.
+ */
+
+#define IPV6_FLOWINFO_FLOWLABEL		0x000fffff
+#define IPV6_FLOWINFO_PRIORITY		0x0ff00000
+
+/* These definitions are obsolete */
+#define IPV6_PRIORITY_UNCHARACTERIZED	0x0000
+#define IPV6_PRIORITY_FILLER		0x0100
+#define IPV6_PRIORITY_UNATTENDED	0x0200
+#define IPV6_PRIORITY_RESERVED1		0x0300
+#define IPV6_PRIORITY_BULK		0x0400
+#define IPV6_PRIORITY_RESERVED2		0x0500
+#define IPV6_PRIORITY_INTERACTIVE	0x0600
+#define IPV6_PRIORITY_CONTROL		0x0700
+#define IPV6_PRIORITY_8			0x0800
+#define IPV6_PRIORITY_9			0x0900
+#define IPV6_PRIORITY_10		0x0a00
+#define IPV6_PRIORITY_11		0x0b00
+#define IPV6_PRIORITY_12		0x0c00
+#define IPV6_PRIORITY_13		0x0d00
+#define IPV6_PRIORITY_14		0x0e00
+#define IPV6_PRIORITY_15		0x0f00
+
+/*
+ *	IPV6 extension headers
+ */
+#define IPPROTO_HOPOPTS		0	/* IPv6 hop-by-hop options	*/
+#define IPPROTO_ROUTING		43	/* IPv6 routing header		*/
+#define IPPROTO_FRAGMENT	44	/* IPv6 fragmentation header	*/
+#define IPPROTO_ICMPV6		58	/* ICMPv6			*/
+#define IPPROTO_NONE		59	/* IPv6 no next header		*/
+#define IPPROTO_DSTOPTS		60	/* IPv6 destination options	*/
+#define IPPROTO_MH		135	/* IPv6 mobility header		*/
+
+/*
+ *	IPv6 TLV options.
+ */
+#define IPV6_TLV_PAD0		0
+#define IPV6_TLV_PADN		1
+#define IPV6_TLV_ROUTERALERT	5
+#define IPV6_TLV_JUMBO		194
+#define IPV6_TLV_HAO		201	/* home address option */
+
+/*
+ *	IPV6 socket options
+ */
+
+#define IPV6_ADDRFORM		1
+#define IPV6_2292PKTINFO	2
+#define IPV6_2292HOPOPTS	3
+#define IPV6_2292DSTOPTS	4
+#define IPV6_2292RTHDR		5
+#define IPV6_2292PKTOPTIONS	6
+#define IPV6_CHECKSUM		7
+#define IPV6_2292HOPLIMIT	8
+#define IPV6_NEXTHOP		9
+#define IPV6_AUTHHDR		10	/* obsolete */
+#define IPV6_FLOWINFO		11
+
+#define IPV6_UNICAST_HOPS	16
+#define IPV6_MULTICAST_IF	17
+#define IPV6_MULTICAST_HOPS	18
+#define IPV6_MULTICAST_LOOP	19
+#define IPV6_ADD_MEMBERSHIP	20
+#define IPV6_DROP_MEMBERSHIP	21
+#define IPV6_ROUTER_ALERT	22
+#define IPV6_MTU_DISCOVER	23
+#define IPV6_MTU		24
+#define IPV6_RECVERR		25
+#define IPV6_V6ONLY		26
+#define IPV6_JOIN_ANYCAST	27
+#define IPV6_LEAVE_ANYCAST	28
+
+/* IPV6_MTU_DISCOVER values */
+#define IPV6_PMTUDISC_DONT		0
+#define IPV6_PMTUDISC_WANT		1
+#define IPV6_PMTUDISC_DO		2
+#define IPV6_PMTUDISC_PROBE		3
+
+/* Flowlabel */
+#define IPV6_FLOWLABEL_MGR	32
+#define IPV6_FLOWINFO_SEND	33
+
+#define IPV6_IPSEC_POLICY	34
+#define IPV6_XFRM_POLICY	35
+
+/*
+ * Multicast:
+ * Following socket options are shared between IPv4 and IPv6.
+ *
+ * MCAST_JOIN_GROUP		42
+ * MCAST_BLOCK_SOURCE		43
+ * MCAST_UNBLOCK_SOURCE		44
+ * MCAST_LEAVE_GROUP		45
+ * MCAST_JOIN_SOURCE_GROUP	46
+ * MCAST_LEAVE_SOURCE_GROUP	47
+ * MCAST_MSFILTER		48
+ */
+
+/*
+ * Advanced API (RFC3542) (1)
+ *
+ * Note: IPV6_RECVRTHDRDSTOPTS does not exist. see net/ipv6/datagram.c.
+ */
+
+#define IPV6_RECVPKTINFO	49
+#define IPV6_PKTINFO		50
+#define IPV6_RECVHOPLIMIT	51
+#define IPV6_HOPLIMIT		52
+#define IPV6_RECVHOPOPTS	53
+#define IPV6_HOPOPTS		54
+#define IPV6_RTHDRDSTOPTS	55
+#define IPV6_RECVRTHDR		56
+#define IPV6_RTHDR		57
+#define IPV6_RECVDSTOPTS	58
+#define IPV6_DSTOPTS		59
+#define IPV6_RECVPATHMTU	60
+#define IPV6_PATHMTU		61
+#define IPV6_DONTFRAG		62
+#if 0	/* not yet */
+#define IPV6_USE_MIN_MTU	63
+#endif
+
+/*
+ * Netfilter (1)
+ *
+ * Following socket options are used in ip6_tables;
+ * see include/linux/netfilter_ipv6/ip6_tables.h.
+ *
+ * IP6T_SO_SET_REPLACE / IP6T_SO_GET_INFO		64
+ * IP6T_SO_SET_ADD_COUNTERS / IP6T_SO_GET_ENTRIES	65
+ */
+
+/*
+ * Advanced API (RFC3542) (2)
+ */
+#define IPV6_RECVTCLASS		66
+#define IPV6_TCLASS		67
+
+/*
+ * Netfilter (2)
+ *
+ * Following socket options are used in ip6_tables;
+ * see include/linux/netfilter_ipv6/ip6_tables.h.
+ *
+ * IP6T_SO_GET_REVISION_MATCH	68
+ * IP6T_SO_GET_REVISION_TARGET	69
+ */
+
+/* RFC5014: Source address selection */
+#define IPV6_ADDR_PREFERENCES	72
+
+#define IPV6_PREFER_SRC_TMP		0x0001
+#define IPV6_PREFER_SRC_PUBLIC		0x0002
+#define IPV6_PREFER_SRC_PUBTMP_DEFAULT	0x0100
+#define IPV6_PREFER_SRC_COA		0x0004
+#define IPV6_PREFER_SRC_HOME		0x0400
+#define IPV6_PREFER_SRC_CGA		0x0008
+#define IPV6_PREFER_SRC_NONCGA		0x0800
+
+/* RFC5082: Generalized Ttl Security Mechanism */
+#define IPV6_MINHOPCOUNT		73
+
+#define IPV6_ORIGDSTADDR        74
+#define IPV6_RECVORIGDSTADDR    IPV6_ORIGDSTADDR
+#define IPV6_TRANSPARENT        75
+#define IPV6_UNICAST_IF         76
+
+/*
+ * Multicast Routing:
+ * see include/linux/mroute6.h.
+ *
+ * MRT6_INIT			200
+ * MRT6_DONE			201
+ * MRT6_ADD_MIF			202
+ * MRT6_DEL_MIF			203
+ * MRT6_ADD_MFC			204
+ * MRT6_DEL_MFC			205
+ * MRT6_VERSION			206
+ * MRT6_ASSERT			207
+ * MRT6_PIM			208
+ * (reserved)			209
+ */
+#endif
diff --git a/include/linux/in_route.h b/include/linux/in_route.h
new file mode 100644
index 00000000..b261b8c9
--- /dev/null
+++ b/include/linux/in_route.h
@@ -0,0 +1,32 @@
+#ifndef _LINUX_IN_ROUTE_H
+#define _LINUX_IN_ROUTE_H
+
+/* IPv4 routing cache flags */
+
+#define RTCF_DEAD	RTNH_F_DEAD
+#define RTCF_ONLINK	RTNH_F_ONLINK
+
+/* Obsolete flag. About to be deleted */
+#define RTCF_NOPMTUDISC RTM_F_NOPMTUDISC
+
+#define RTCF_NOTIFY	0x00010000
+#define RTCF_DIRECTDST	0x00020000 /* unused */
+#define RTCF_REDIRECTED	0x00040000
+#define RTCF_TPROXY	0x00080000 /* unused */
+
+#define RTCF_FAST	0x00200000 /* unused */
+#define RTCF_MASQ	0x00400000 /* unused */
+#define RTCF_SNAT	0x00800000 /* unused */
+#define RTCF_DOREDIRECT 0x01000000
+#define RTCF_DIRECTSRC	0x04000000
+#define RTCF_DNAT	0x08000000
+#define RTCF_BROADCAST	0x10000000
+#define RTCF_MULTICAST	0x20000000
+#define RTCF_REJECT	0x40000000 /* unused */
+#define RTCF_LOCAL	0x80000000
+
+#define RTCF_NAT	(RTCF_DNAT|RTCF_SNAT)
+
+#define RT_TOS(tos)	((tos)&IPTOS_TOS_MASK)
+
+#endif /* _LINUX_IN_ROUTE_H */
diff --git a/include/linux/inet.h b/include/linux/inet.h
new file mode 100644
index 00000000..4cca05c9
--- /dev/null
+++ b/include/linux/inet.h
@@ -0,0 +1,57 @@
+/*
+ *		Swansea University Computer Society NET3
+ *
+ *	This work is derived from NET2Debugged, which is in turn derived
+ *	from NET2D which was written by:
+ * 		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This work was derived from Ross Biro's inspirational work
+ *		for the LINUX operating system.  His version numbers were:
+ *
+ *		$Id: Space.c,v     0.8.4.5  1992/12/12 19:25:04 bir7 Exp $
+ *		$Id: arp.c,v       0.8.4.6  1993/01/28 22:30:00 bir7 Exp $
+ *		$Id: arp.h,v       0.8.4.6  1993/01/28 22:30:00 bir7 Exp $
+ *		$Id: dev.c,v       0.8.4.13 1993/01/23 18:00:11 bir7 Exp $
+ *		$Id: dev.h,v       0.8.4.7  1993/01/23 18:00:11 bir7 Exp $
+ *		$Id: eth.c,v       0.8.4.4  1993/01/22 23:21:38 bir7 Exp $
+ *		$Id: eth.h,v       0.8.4.1  1992/11/10 00:17:18 bir7 Exp $
+ *		$Id: icmp.c,v      0.8.4.9  1993/01/23 18:00:11 bir7 Exp $
+ *		$Id: icmp.h,v      0.8.4.2  1992/11/15 14:55:30 bir7 Exp $
+ * 		$Id: ip.c,v        0.8.4.8  1992/12/12 19:25:04 bir7 Exp $
+ * 		$Id: ip.h,v        0.8.4.2  1993/01/23 18:00:11 bir7 Exp $
+ * 		$Id: loopback.c,v  0.8.4.8  1993/01/23 18:00:11 bir7 Exp $
+ * 		$Id: packet.c,v    0.8.4.7  1993/01/26 22:04:00 bir7 Exp $
+ *		$Id: protocols.c,v 0.8.4.3  1992/11/15 14:55:30 bir7 Exp $
+ *		$Id: raw.c,v       0.8.4.12 1993/01/26 22:04:00 bir7 Exp $
+ *		$Id: sock.c,v      0.8.4.6  1993/01/28 22:30:00 bir7 Exp $
+ *		$Id: sock.h,v      0.8.4.7  1993/01/26 22:04:00 bir7 Exp $
+ *		$Id: tcp.c,v       0.8.4.16 1993/01/26 22:04:00 bir7 Exp $
+ *		$Id: tcp.h,v       0.8.4.7  1993/01/22 22:58:08 bir7 Exp $
+ *		$Id: timer.c,v     0.8.4.8  1993/01/23 18:00:11 bir7 Exp $
+ *		$Id: timer.h,v     0.8.4.2  1993/01/23 18:00:11 bir7 Exp $
+ *		$Id: udp.c,v       0.8.4.12 1993/01/26 22:04:00 bir7 Exp $
+ *		$Id: udp.h,v       0.8.4.1  1992/11/10 00:17:18 bir7 Exp $
+ *		$Id: we.c,v        0.8.4.10 1993/01/23 18:00:11 bir7 Exp $
+ *		$Id: wereg.h,v     0.8.4.1  1992/11/10 00:17:18 bir7 Exp $
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_INET_H
+#define _LINUX_INET_H
+
+#include <linux/types.h>
+
+/*
+ * These mimic similar macros defined in user-space for inet_ntop(3).
+ * See /usr/include/netinet/in.h .
+ */
+#define INET_ADDRSTRLEN		(16)
+#define INET6_ADDRSTRLEN	(48)
+
+extern __be32 in_aton(const char *str);
+extern int in4_pton(const char *src, int srclen, u8 *dst, int delim, const char **end);
+extern int in6_pton(const char *src, int srclen, u8 *dst, int delim, const char **end);
+#endif	/* _LINUX_INET_H */
diff --git a/include/linux/inet_diag.h b/include/linux/inet_diag.h
new file mode 100644
index 00000000..f1362b54
--- /dev/null
+++ b/include/linux/inet_diag.h
@@ -0,0 +1,177 @@
+#ifndef _INET_DIAG_H_
+#define _INET_DIAG_H_ 1
+
+#include <linux/types.h>
+
+/* Just some random number */
+#define TCPDIAG_GETSOCK 18
+#define DCCPDIAG_GETSOCK 19
+
+#define INET_DIAG_GETSOCK_MAX 24
+
+/* Socket identity */
+struct inet_diag_sockid {
+	__be16	idiag_sport;
+	__be16	idiag_dport;
+	__be32	idiag_src[4];
+	__be32	idiag_dst[4];
+	__u32	idiag_if;
+	__u32	idiag_cookie[2];
+#define INET_DIAG_NOCOOKIE (~0U)
+};
+
+/* Request structure */
+
+struct inet_diag_req {
+	__u8	idiag_family;		/* Family of addresses. */
+	__u8	idiag_src_len;
+	__u8	idiag_dst_len;
+	__u8	idiag_ext;		/* Query extended information */
+
+	struct inet_diag_sockid id;
+
+	__u32	idiag_states;		/* States to dump */
+	__u32	idiag_dbs;		/* Tables to dump (NI) */
+};
+
+struct inet_diag_req_v2 {
+	__u8	sdiag_family;
+	__u8	sdiag_protocol;
+	__u8	idiag_ext;
+	__u8	pad;
+	__u32	idiag_states;
+	struct inet_diag_sockid id;
+};
+
+enum {
+	INET_DIAG_REQ_NONE,
+	INET_DIAG_REQ_BYTECODE,
+};
+
+#define INET_DIAG_REQ_MAX INET_DIAG_REQ_BYTECODE
+
+/* Bytecode is sequence of 4 byte commands followed by variable arguments.
+ * All the commands identified by "code" are conditional jumps forward:
+ * to offset cc+"yes" or to offset cc+"no". "yes" is supposed to be
+ * length of the command and its arguments.
+ */
+ 
+struct inet_diag_bc_op {
+	unsigned char	code;
+	unsigned char	yes;
+	unsigned short	no;
+};
+
+enum {
+	INET_DIAG_BC_NOP,
+	INET_DIAG_BC_JMP,
+	INET_DIAG_BC_S_GE,
+	INET_DIAG_BC_S_LE,
+	INET_DIAG_BC_D_GE,
+	INET_DIAG_BC_D_LE,
+	INET_DIAG_BC_AUTO,
+	INET_DIAG_BC_S_COND,
+	INET_DIAG_BC_D_COND,
+};
+
+struct inet_diag_hostcond {
+	__u8	family;
+	__u8	prefix_len;
+	int	port;
+	__be32	addr[0];
+};
+
+/* Base info structure. It contains socket identity (addrs/ports/cookie)
+ * and, alas, the information shown by netstat. */
+struct inet_diag_msg {
+	__u8	idiag_family;
+	__u8	idiag_state;
+	__u8	idiag_timer;
+	__u8	idiag_retrans;
+
+	struct inet_diag_sockid id;
+
+	__u32	idiag_expires;
+	__u32	idiag_rqueue;
+	__u32	idiag_wqueue;
+	__u32	idiag_uid;
+	__u32	idiag_inode;
+};
+
+/* Extensions */
+
+enum {
+	INET_DIAG_NONE,
+	INET_DIAG_MEMINFO,
+	INET_DIAG_INFO,
+	INET_DIAG_VEGASINFO,
+	INET_DIAG_CONG,
+	INET_DIAG_TOS,
+	INET_DIAG_TCLASS,
+	INET_DIAG_SKMEMINFO,
+};
+
+#define INET_DIAG_MAX INET_DIAG_SKMEMINFO
+
+
+/* INET_DIAG_MEM */
+
+struct inet_diag_meminfo {
+	__u32	idiag_rmem;
+	__u32	idiag_wmem;
+	__u32	idiag_fmem;
+	__u32	idiag_tmem;
+};
+
+/* INET_DIAG_VEGASINFO */
+
+struct tcpvegas_info {
+	__u32	tcpv_enabled;
+	__u32	tcpv_rttcnt;
+	__u32	tcpv_rtt;
+	__u32	tcpv_minrtt;
+};
+
+#ifdef __KERNEL__
+struct sock;
+struct inet_hashinfo;
+struct nlattr;
+struct nlmsghdr;
+struct sk_buff;
+struct netlink_callback;
+
+struct inet_diag_handler {
+	void			(*dump)(struct sk_buff *skb,
+					struct netlink_callback *cb,
+					struct inet_diag_req_v2 *r,
+					struct nlattr *bc);
+
+	int			(*dump_one)(struct sk_buff *in_skb,
+					const struct nlmsghdr *nlh,
+					struct inet_diag_req_v2 *req);
+
+	void			(*idiag_get_info)(struct sock *sk,
+						  struct inet_diag_msg *r,
+						  void *info);
+	__u16                   idiag_type;
+};
+
+struct inet_connection_sock;
+int inet_sk_diag_fill(struct sock *sk, struct inet_connection_sock *icsk,
+			      struct sk_buff *skb, struct inet_diag_req_v2 *req,
+			      u32 pid, u32 seq, u16 nlmsg_flags,
+			      const struct nlmsghdr *unlh);
+void inet_diag_dump_icsk(struct inet_hashinfo *h, struct sk_buff *skb,
+		struct netlink_callback *cb, struct inet_diag_req_v2 *r,
+		struct nlattr *bc);
+int inet_diag_dump_one_icsk(struct inet_hashinfo *hashinfo,
+		struct sk_buff *in_skb, const struct nlmsghdr *nlh,
+		struct inet_diag_req_v2 *req);
+
+int inet_diag_bc_sk(const struct nlattr *_bc, struct sock *sk);
+
+extern int  inet_diag_register(const struct inet_diag_handler *handler);
+extern void inet_diag_unregister(const struct inet_diag_handler *handler);
+#endif /* __KERNEL__ */
+
+#endif /* _INET_DIAG_H_ */
diff --git a/include/linux/inet_lro.h b/include/linux/inet_lro.h
new file mode 100644
index 00000000..2cf55afb
--- /dev/null
+++ b/include/linux/inet_lro.h
@@ -0,0 +1,165 @@
+/*
+ *  linux/include/linux/inet_lro.h
+ *
+ *  Large Receive Offload (ipv4 / tcp)
+ *
+ *  (C) Copyright IBM Corp. 2007
+ *
+ *  Authors:
+ *       Jan-Bernd Themann <themann@de.ibm.com>
+ *       Christoph Raisch <raisch@de.ibm.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __INET_LRO_H_
+#define __INET_LRO_H_
+
+#include <net/ip.h>
+#include <net/tcp.h>
+
+/*
+ * LRO statistics
+ */
+
+struct net_lro_stats {
+	unsigned long aggregated;
+	unsigned long flushed;
+	unsigned long no_desc;
+};
+
+/*
+ * LRO descriptor for a tcp session
+ */
+struct net_lro_desc {
+	struct sk_buff *parent;
+	struct sk_buff *last_skb;
+	struct skb_frag_struct *next_frag;
+	struct iphdr *iph;
+	struct tcphdr *tcph;
+	__wsum  data_csum;
+	__be32 tcp_rcv_tsecr;
+	__be32 tcp_rcv_tsval;
+	__be32 tcp_ack;
+	u32 tcp_next_seq;
+	u32 skb_tot_frags_len;
+	u16 ip_tot_len;
+	u16 tcp_saw_tstamp; 		/* timestamps enabled */
+	__be16 tcp_window;
+	int pkt_aggr_cnt;		/* counts aggregated packets */
+	int vlan_packet;
+	int mss;
+	int active;
+};
+
+/*
+ * Large Receive Offload (LRO) Manager
+ *
+ * Fields must be set by driver
+ */
+
+struct net_lro_mgr {
+	struct net_device *dev;
+	struct net_lro_stats stats;
+
+	/* LRO features */
+	unsigned long features;
+#define LRO_F_NAPI            1  /* Pass packets to stack via NAPI */
+#define LRO_F_EXTRACT_VLAN_ID 2  /* Set flag if VLAN IDs are extracted
+				    from received packets and eth protocol
+				    is still ETH_P_8021Q */
+
+	/*
+	 * Set for generated SKBs that are not added to
+	 * the frag list in fragmented mode
+	 */
+	u32 ip_summed;
+	u32 ip_summed_aggr; /* Set in aggregated SKBs: CHECKSUM_UNNECESSARY
+			     * or CHECKSUM_NONE */
+
+	int max_desc; /* Max number of LRO descriptors  */
+	int max_aggr; /* Max number of LRO packets to be aggregated */
+
+	int frag_align_pad; /* Padding required to properly align layer 3
+			     * headers in generated skb when using frags */
+
+	struct net_lro_desc *lro_arr; /* Array of LRO descriptors */
+
+	/*
+	 * Optimized driver functions
+	 *
+	 * get_skb_header: returns tcp and ip header for packet in SKB
+	 */
+	int (*get_skb_header)(struct sk_buff *skb, void **ip_hdr,
+			      void **tcpudp_hdr, u64 *hdr_flags, void *priv);
+
+	/* hdr_flags: */
+#define LRO_IPV4 1 /* ip_hdr is IPv4 header */
+#define LRO_TCP  2 /* tcpudp_hdr is TCP header */
+
+	/*
+	 * get_frag_header: returns mac, tcp and ip header for packet in SKB
+	 *
+	 * @hdr_flags: Indicate what kind of LRO has to be done
+	 *             (IPv4/IPv6/TCP/UDP)
+	 */
+	int (*get_frag_header)(struct skb_frag_struct *frag, void **mac_hdr,
+			       void **ip_hdr, void **tcpudp_hdr, u64 *hdr_flags,
+			       void *priv);
+};
+
+/*
+ * Processes a SKB
+ *
+ * @lro_mgr: LRO manager to use
+ * @skb: SKB to aggregate
+ * @priv: Private data that may be used by driver functions
+ *        (for example get_tcp_ip_hdr)
+ */
+
+void lro_receive_skb(struct net_lro_mgr *lro_mgr,
+		     struct sk_buff *skb,
+		     void *priv);
+
+/*
+ * Processes a fragment list
+ *
+ * This functions aggregate fragments and generate SKBs do pass
+ * the packets to the stack.
+ *
+ * @lro_mgr: LRO manager to use
+ * @frags: Fragment to be processed. Must contain entire header in first
+ *         element.
+ * @len: Length of received data
+ * @true_size: Actual size of memory the fragment is consuming
+ * @priv: Private data that may be used by driver functions
+ *        (for example get_tcp_ip_hdr)
+ */
+
+void lro_receive_frags(struct net_lro_mgr *lro_mgr,
+		       struct skb_frag_struct *frags,
+		       int len, int true_size, void *priv, __wsum sum);
+
+/*
+ * Forward all aggregated SKBs held by lro_mgr to network stack
+ */
+
+void lro_flush_all(struct net_lro_mgr *lro_mgr);
+
+void lro_flush_pkt(struct net_lro_mgr *lro_mgr,
+		   struct iphdr *iph, struct tcphdr *tcph);
+
+#endif
diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h
new file mode 100644
index 00000000..597f4a9f
--- /dev/null
+++ b/include/linux/inetdevice.h
@@ -0,0 +1,259 @@
+#ifndef _LINUX_INETDEVICE_H
+#define _LINUX_INETDEVICE_H
+
+#ifdef __KERNEL__
+
+#include <linux/bitmap.h>
+#include <linux/if.h>
+#include <linux/netdevice.h>
+#include <linux/rcupdate.h>
+#include <linux/timer.h>
+#include <linux/sysctl.h>
+#include <linux/rtnetlink.h>
+
+enum
+{
+	IPV4_DEVCONF_FORWARDING=1,
+	IPV4_DEVCONF_MC_FORWARDING,
+	IPV4_DEVCONF_PROXY_ARP,
+	IPV4_DEVCONF_ACCEPT_REDIRECTS,
+	IPV4_DEVCONF_SECURE_REDIRECTS,
+	IPV4_DEVCONF_SEND_REDIRECTS,
+	IPV4_DEVCONF_SHARED_MEDIA,
+	IPV4_DEVCONF_RP_FILTER,
+	IPV4_DEVCONF_ACCEPT_SOURCE_ROUTE,
+	IPV4_DEVCONF_BOOTP_RELAY,
+	IPV4_DEVCONF_LOG_MARTIANS,
+	IPV4_DEVCONF_TAG,
+	IPV4_DEVCONF_ARPFILTER,
+	IPV4_DEVCONF_MEDIUM_ID,
+	IPV4_DEVCONF_NOXFRM,
+	IPV4_DEVCONF_NOPOLICY,
+	IPV4_DEVCONF_FORCE_IGMP_VERSION,
+	IPV4_DEVCONF_ARP_ANNOUNCE,
+	IPV4_DEVCONF_ARP_IGNORE,
+	IPV4_DEVCONF_PROMOTE_SECONDARIES,
+	IPV4_DEVCONF_ARP_ACCEPT,
+	IPV4_DEVCONF_ARP_NOTIFY,
+	IPV4_DEVCONF_ACCEPT_LOCAL,
+	IPV4_DEVCONF_SRC_VMARK,
+	IPV4_DEVCONF_PROXY_ARP_PVLAN,
+	__IPV4_DEVCONF_MAX
+};
+
+#define IPV4_DEVCONF_MAX (__IPV4_DEVCONF_MAX - 1)
+
+struct ipv4_devconf {
+	void	*sysctl;
+	int	data[IPV4_DEVCONF_MAX];
+	DECLARE_BITMAP(state, IPV4_DEVCONF_MAX);
+};
+
+struct in_device {
+	struct net_device	*dev;
+	atomic_t		refcnt;
+	int			dead;
+	struct in_ifaddr	*ifa_list;	/* IP ifaddr chain		*/
+	struct ip_mc_list __rcu	*mc_list;	/* IP multicast filter chain    */
+	int			mc_count;	/* Number of installed mcasts	*/
+	spinlock_t		mc_tomb_lock;
+	struct ip_mc_list	*mc_tomb;
+	unsigned long		mr_v1_seen;
+	unsigned long		mr_v2_seen;
+	unsigned long		mr_maxdelay;
+	unsigned char		mr_qrv;
+	unsigned char		mr_gq_running;
+	unsigned char		mr_ifc_count;
+	struct timer_list	mr_gq_timer;	/* general query timer */
+	struct timer_list	mr_ifc_timer;	/* interface change timer */
+
+	struct neigh_parms	*arp_parms;
+	struct ipv4_devconf	cnf;
+	struct rcu_head		rcu_head;
+};
+
+#define IPV4_DEVCONF(cnf, attr) ((cnf).data[IPV4_DEVCONF_ ## attr - 1])
+#define IPV4_DEVCONF_ALL(net, attr) \
+	IPV4_DEVCONF((*(net)->ipv4.devconf_all), attr)
+
+static inline int ipv4_devconf_get(struct in_device *in_dev, int index)
+{
+	index--;
+	return in_dev->cnf.data[index];
+}
+
+static inline void ipv4_devconf_set(struct in_device *in_dev, int index,
+				    int val)
+{
+	index--;
+	set_bit(index, in_dev->cnf.state);
+	in_dev->cnf.data[index] = val;
+}
+
+static inline void ipv4_devconf_setall(struct in_device *in_dev)
+{
+	bitmap_fill(in_dev->cnf.state, IPV4_DEVCONF_MAX);
+}
+
+#define IN_DEV_CONF_GET(in_dev, attr) \
+	ipv4_devconf_get((in_dev), IPV4_DEVCONF_ ## attr)
+#define IN_DEV_CONF_SET(in_dev, attr, val) \
+	ipv4_devconf_set((in_dev), IPV4_DEVCONF_ ## attr, (val))
+
+#define IN_DEV_ANDCONF(in_dev, attr) \
+	(IPV4_DEVCONF_ALL(dev_net(in_dev->dev), attr) && \
+	 IN_DEV_CONF_GET((in_dev), attr))
+#define IN_DEV_ORCONF(in_dev, attr) \
+	(IPV4_DEVCONF_ALL(dev_net(in_dev->dev), attr) || \
+	 IN_DEV_CONF_GET((in_dev), attr))
+#define IN_DEV_MAXCONF(in_dev, attr) \
+	(max(IPV4_DEVCONF_ALL(dev_net(in_dev->dev), attr), \
+	     IN_DEV_CONF_GET((in_dev), attr)))
+
+#define IN_DEV_FORWARD(in_dev)		IN_DEV_CONF_GET((in_dev), FORWARDING)
+#define IN_DEV_MFORWARD(in_dev)		IN_DEV_ANDCONF((in_dev), MC_FORWARDING)
+#define IN_DEV_RPFILTER(in_dev)		IN_DEV_MAXCONF((in_dev), RP_FILTER)
+#define IN_DEV_SRC_VMARK(in_dev)    	IN_DEV_ORCONF((in_dev), SRC_VMARK)
+#define IN_DEV_SOURCE_ROUTE(in_dev)	IN_DEV_ANDCONF((in_dev), \
+						       ACCEPT_SOURCE_ROUTE)
+#define IN_DEV_ACCEPT_LOCAL(in_dev)	IN_DEV_ORCONF((in_dev), ACCEPT_LOCAL)
+#define IN_DEV_BOOTP_RELAY(in_dev)	IN_DEV_ANDCONF((in_dev), BOOTP_RELAY)
+
+#define IN_DEV_LOG_MARTIANS(in_dev)	IN_DEV_ORCONF((in_dev), LOG_MARTIANS)
+#define IN_DEV_PROXY_ARP(in_dev)	IN_DEV_ORCONF((in_dev), PROXY_ARP)
+#define IN_DEV_PROXY_ARP_PVLAN(in_dev)	IN_DEV_CONF_GET(in_dev, PROXY_ARP_PVLAN)
+#define IN_DEV_SHARED_MEDIA(in_dev)	IN_DEV_ORCONF((in_dev), SHARED_MEDIA)
+#define IN_DEV_TX_REDIRECTS(in_dev)	IN_DEV_ORCONF((in_dev), SEND_REDIRECTS)
+#define IN_DEV_SEC_REDIRECTS(in_dev)	IN_DEV_ORCONF((in_dev), \
+						      SECURE_REDIRECTS)
+#define IN_DEV_IDTAG(in_dev)		IN_DEV_CONF_GET(in_dev, TAG)
+#define IN_DEV_MEDIUM_ID(in_dev)	IN_DEV_CONF_GET(in_dev, MEDIUM_ID)
+#define IN_DEV_PROMOTE_SECONDARIES(in_dev) \
+					IN_DEV_ORCONF((in_dev), \
+						      PROMOTE_SECONDARIES)
+
+#define IN_DEV_RX_REDIRECTS(in_dev) \
+	((IN_DEV_FORWARD(in_dev) && \
+	  IN_DEV_ANDCONF((in_dev), ACCEPT_REDIRECTS)) \
+	 || (!IN_DEV_FORWARD(in_dev) && \
+	  IN_DEV_ORCONF((in_dev), ACCEPT_REDIRECTS)))
+
+#define IN_DEV_ARPFILTER(in_dev)	IN_DEV_ORCONF((in_dev), ARPFILTER)
+#define IN_DEV_ARP_ACCEPT(in_dev)	IN_DEV_ORCONF((in_dev), ARP_ACCEPT)
+#define IN_DEV_ARP_ANNOUNCE(in_dev)	IN_DEV_MAXCONF((in_dev), ARP_ANNOUNCE)
+#define IN_DEV_ARP_IGNORE(in_dev)	IN_DEV_MAXCONF((in_dev), ARP_IGNORE)
+#define IN_DEV_ARP_NOTIFY(in_dev)	IN_DEV_MAXCONF((in_dev), ARP_NOTIFY)
+
+struct in_ifaddr {
+	struct hlist_node	hash;
+	struct in_ifaddr	*ifa_next;
+	struct in_device	*ifa_dev;
+	struct rcu_head		rcu_head;
+	__be32			ifa_local;
+	__be32			ifa_address;
+	__be32			ifa_mask;
+	__be32			ifa_broadcast;
+	unsigned char		ifa_scope;
+	unsigned char		ifa_flags;
+	unsigned char		ifa_prefixlen;
+	char			ifa_label[IFNAMSIZ];
+};
+
+extern int register_inetaddr_notifier(struct notifier_block *nb);
+extern int unregister_inetaddr_notifier(struct notifier_block *nb);
+
+extern struct net_device *__ip_dev_find(struct net *net, __be32 addr, bool devref);
+static inline struct net_device *ip_dev_find(struct net *net, __be32 addr)
+{
+	return __ip_dev_find(net, addr, true);
+}
+
+extern int		inet_addr_onlink(struct in_device *in_dev, __be32 a, __be32 b);
+extern int		devinet_ioctl(struct net *net, unsigned int cmd, void __user *);
+extern void		devinet_init(void);
+extern struct in_device	*inetdev_by_index(struct net *, int);
+extern __be32		inet_select_addr(const struct net_device *dev, __be32 dst, int scope);
+extern __be32		inet_confirm_addr(struct in_device *in_dev, __be32 dst, __be32 local, int scope);
+extern struct in_ifaddr *inet_ifa_byprefix(struct in_device *in_dev, __be32 prefix, __be32 mask);
+
+static __inline__ int inet_ifa_match(__be32 addr, struct in_ifaddr *ifa)
+{
+	return !((addr^ifa->ifa_address)&ifa->ifa_mask);
+}
+
+/*
+ *	Check if a mask is acceptable.
+ */
+ 
+static __inline__ int bad_mask(__be32 mask, __be32 addr)
+{
+	__u32 hmask;
+	if (addr & (mask = ~mask))
+		return 1;
+	hmask = ntohl(mask);
+	if (hmask & (hmask+1))
+		return 1;
+	return 0;
+}
+
+#define for_primary_ifa(in_dev)	{ struct in_ifaddr *ifa; \
+  for (ifa = (in_dev)->ifa_list; ifa && !(ifa->ifa_flags&IFA_F_SECONDARY); ifa = ifa->ifa_next)
+
+#define for_ifa(in_dev)	{ struct in_ifaddr *ifa; \
+  for (ifa = (in_dev)->ifa_list; ifa; ifa = ifa->ifa_next)
+
+
+#define endfor_ifa(in_dev) }
+
+static inline struct in_device *__in_dev_get_rcu(const struct net_device *dev)
+{
+	return rcu_dereference(dev->ip_ptr);
+}
+
+static inline struct in_device *in_dev_get(const struct net_device *dev)
+{
+	struct in_device *in_dev;
+
+	rcu_read_lock();
+	in_dev = __in_dev_get_rcu(dev);
+	if (in_dev)
+		atomic_inc(&in_dev->refcnt);
+	rcu_read_unlock();
+	return in_dev;
+}
+
+static inline struct in_device *__in_dev_get_rtnl(const struct net_device *dev)
+{
+	return rtnl_dereference(dev->ip_ptr);
+}
+
+extern void in_dev_finish_destroy(struct in_device *idev);
+
+static inline void in_dev_put(struct in_device *idev)
+{
+	if (atomic_dec_and_test(&idev->refcnt))
+		in_dev_finish_destroy(idev);
+}
+
+#define __in_dev_put(idev)  atomic_dec(&(idev)->refcnt)
+#define in_dev_hold(idev)   atomic_inc(&(idev)->refcnt)
+
+#endif /* __KERNEL__ */
+
+static __inline__ __be32 inet_make_mask(int logmask)
+{
+	if (logmask)
+		return htonl(~((1<<(32-logmask))-1));
+	return 0;
+}
+
+static __inline__ int inet_mask_len(__be32 mask)
+{
+	__u32 hmask = ntohl(mask);
+	if (!hmask)
+		return 0;
+	return 32 - ffz(~hmask);
+}
+
+
+#endif /* _LINUX_INETDEVICE_H */
diff --git a/include/linux/init.h b/include/linux/init.h
new file mode 100644
index 00000000..6b951095
--- /dev/null
+++ b/include/linux/init.h
@@ -0,0 +1,350 @@
+#ifndef _LINUX_INIT_H
+#define _LINUX_INIT_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+/* These macros are used to mark some functions or 
+ * initialized data (doesn't apply to uninitialized data)
+ * as `initialization' functions. The kernel can take this
+ * as hint that the function is used only during the initialization
+ * phase and free up used memory resources after
+ *
+ * Usage:
+ * For functions:
+ * 
+ * You should add __init immediately before the function name, like:
+ *
+ * static void __init initme(int x, int y)
+ * {
+ *    extern int z; z = x * y;
+ * }
+ *
+ * If the function has a prototype somewhere, you can also add
+ * __init between closing brace of the prototype and semicolon:
+ *
+ * extern int initialize_foobar_device(int, int, int) __init;
+ *
+ * For initialized data:
+ * You should insert __initdata between the variable name and equal
+ * sign followed by value, e.g.:
+ *
+ * static int init_variable __initdata = 0;
+ * static const char linux_logo[] __initconst = { 0x32, 0x36, ... };
+ *
+ * Don't forget to initialize data not at file scope, i.e. within a function,
+ * as gcc otherwise puts the data into the bss section and not into the init
+ * section.
+ * 
+ * Also note, that this data cannot be "const".
+ */
+
+/* These are for everybody (although not all archs will actually
+   discard it in modules) */
+#define __init		__section(.init.text) __cold notrace
+#define __initdata	__section(.init.data)
+#define __initconst	__section(.init.rodata)
+#define __exitdata	__section(.exit.data)
+#define __exit_call	__used __section(.exitcall.exit)
+
+/*
+ * modpost check for section mismatches during the kernel build.
+ * A section mismatch happens when there are references from a
+ * code or data section to an init section (both code or data).
+ * The init sections are (for most archs) discarded by the kernel
+ * when early init has completed so all such references are potential bugs.
+ * For exit sections the same issue exists.
+ *
+ * The following markers are used for the cases where the reference to
+ * the *init / *exit section (code or data) is valid and will teach
+ * modpost not to issue a warning.  Intended semantics is that a code or
+ * data tagged __ref* can reference code or data from init section without
+ * producing a warning (of course, no warning does not mean code is
+ * correct, so optimally document why the __ref is needed and why it's OK).
+ *
+ * The markers follow same syntax rules as __init / __initdata.
+ */
+#define __ref            __section(.ref.text) noinline
+#define __refdata        __section(.ref.data)
+#define __refconst       __section(.ref.rodata)
+
+/* compatibility defines */
+#define __init_refok     __ref
+#define __initdata_refok __refdata
+#define __exit_refok     __ref
+
+
+#ifdef MODULE
+#define __exitused
+#else
+#define __exitused  __used
+#endif
+
+#define __exit          __section(.exit.text) __exitused __cold notrace
+
+/* Used for HOTPLUG */
+#define __devinit        __section(.devinit.text) __cold notrace
+#define __devinitdata    __section(.devinit.data)
+#define __devinitconst   __section(.devinit.rodata)
+#define __devexit        __section(.devexit.text) __exitused __cold notrace
+#define __devexitdata    __section(.devexit.data)
+#define __devexitconst   __section(.devexit.rodata)
+
+/* Used for HOTPLUG_CPU */
+#define __cpuinit        __section(.cpuinit.text) __cold notrace
+#define __cpuinitdata    __section(.cpuinit.data)
+#define __cpuinitconst   __section(.cpuinit.rodata)
+#define __cpuexit        __section(.cpuexit.text) __exitused __cold notrace
+#define __cpuexitdata    __section(.cpuexit.data)
+#define __cpuexitconst   __section(.cpuexit.rodata)
+
+/* Used for MEMORY_HOTPLUG */
+#define __meminit        __section(.meminit.text) __cold notrace
+#define __meminitdata    __section(.meminit.data)
+#define __meminitconst   __section(.meminit.rodata)
+#define __memexit        __section(.memexit.text) __exitused __cold notrace
+#define __memexitdata    __section(.memexit.data)
+#define __memexitconst   __section(.memexit.rodata)
+
+/* For assembly routines */
+#define __HEAD		.section	".head.text","ax"
+#define __INIT		.section	".init.text","ax"
+#define __FINIT		.previous
+
+#define __INITDATA	.section	".init.data","aw",%progbits
+#define __INITRODATA	.section	".init.rodata","a",%progbits
+#define __FINITDATA	.previous
+
+#define __DEVINIT        .section	".devinit.text", "ax"
+#define __DEVINITDATA    .section	".devinit.data", "aw"
+#define __DEVINITRODATA  .section	".devinit.rodata", "a"
+
+#define __CPUINIT        .section	".cpuinit.text", "ax"
+#define __CPUINITDATA    .section	".cpuinit.data", "aw"
+#define __CPUINITRODATA  .section	".cpuinit.rodata", "a"
+
+#define __MEMINIT        .section	".meminit.text", "ax"
+#define __MEMINITDATA    .section	".meminit.data", "aw"
+#define __MEMINITRODATA  .section	".meminit.rodata", "a"
+
+/* silence warnings when references are OK */
+#define __REF            .section       ".ref.text", "ax"
+#define __REFDATA        .section       ".ref.data", "aw"
+#define __REFCONST       .section       ".ref.rodata", "a"
+
+#ifndef __ASSEMBLY__
+/*
+ * Used for initialization calls..
+ */
+typedef int (*initcall_t)(void);
+typedef void (*exitcall_t)(void);
+
+extern initcall_t __con_initcall_start[], __con_initcall_end[];
+extern initcall_t __security_initcall_start[], __security_initcall_end[];
+
+/* Used for contructor calls. */
+typedef void (*ctor_fn_t)(void);
+
+/* Defined in init/main.c */
+extern int do_one_initcall(initcall_t fn);
+extern char __initdata boot_command_line[];
+extern char *saved_command_line;
+extern unsigned int reset_devices;
+
+/* used by init/main.c */
+void setup_arch(char **);
+void prepare_namespace(void);
+
+extern void (*late_time_init)(void);
+
+extern bool initcall_debug;
+
+#endif
+  
+#ifndef MODULE
+
+#ifndef __ASSEMBLY__
+
+/* initcalls are now grouped by functionality into separate 
+ * subsections. Ordering inside the subsections is determined
+ * by link order. 
+ * For backwards compatibility, initcall() puts the call in 
+ * the device init subsection.
+ *
+ * The `id' arg to __define_initcall() is needed so that multiple initcalls
+ * can point at the same handler without causing duplicate-symbol build errors.
+ */
+
+#define __define_initcall(level,fn,id) \
+	static initcall_t __initcall_##fn##id __used \
+	__attribute__((__section__(".initcall" level ".init"))) = fn
+
+/*
+ * Early initcalls run before initializing SMP.
+ *
+ * Only for built-in code, not modules.
+ */
+#define early_initcall(fn)		__define_initcall("early",fn,early)
+
+/*
+ * A "pure" initcall has no dependencies on anything else, and purely
+ * initializes variables that couldn't be statically initialized.
+ *
+ * This only exists for built-in code, not for modules.
+ */
+#define pure_initcall(fn)		__define_initcall("0",fn,0)
+
+#define core_initcall(fn)		__define_initcall("1",fn,1)
+#define core_initcall_sync(fn)		__define_initcall("1s",fn,1s)
+#define postcore_initcall(fn)		__define_initcall("2",fn,2)
+#define postcore_initcall_sync(fn)	__define_initcall("2s",fn,2s)
+#define arch_initcall(fn)		__define_initcall("3",fn,3)
+#define arch_initcall_sync(fn)		__define_initcall("3s",fn,3s)
+#define subsys_initcall(fn)		__define_initcall("4",fn,4)
+#define subsys_initcall_sync(fn)	__define_initcall("4s",fn,4s)
+#define fs_initcall(fn)			__define_initcall("5",fn,5)
+#define fs_initcall_sync(fn)		__define_initcall("5s",fn,5s)
+#define rootfs_initcall(fn)		__define_initcall("rootfs",fn,rootfs)
+#define device_initcall(fn)		__define_initcall("6",fn,6)
+#define device_initcall_sync(fn)	__define_initcall("6s",fn,6s)
+#define late_initcall(fn)		__define_initcall("7",fn,7)
+#define late_initcall_sync(fn)		__define_initcall("7s",fn,7s)
+
+#define __initcall(fn) device_initcall(fn)
+
+#define __exitcall(fn) \
+	static exitcall_t __exitcall_##fn __exit_call = fn
+
+#define console_initcall(fn) \
+	static initcall_t __initcall_##fn \
+	__used __section(.con_initcall.init) = fn
+
+#define security_initcall(fn) \
+	static initcall_t __initcall_##fn \
+	__used __section(.security_initcall.init) = fn
+
+struct obs_kernel_param {
+	const char *str;
+	int (*setup_func)(char *);
+	int early;
+};
+
+/*
+ * Only for really core code.  See moduleparam.h for the normal way.
+ *
+ * Force the alignment so the compiler doesn't space elements of the
+ * obs_kernel_param "array" too far apart in .init.setup.
+ */
+#define __setup_param(str, unique_id, fn, early)			\
+	static const char __setup_str_##unique_id[] __initconst	\
+		__aligned(1) = str; \
+	static struct obs_kernel_param __setup_##unique_id	\
+		__used __section(.init.setup)			\
+		__attribute__((aligned((sizeof(long)))))	\
+		= { __setup_str_##unique_id, fn, early }
+
+#define __setup(str, fn)					\
+	__setup_param(str, fn, fn, 0)
+
+/* NOTE: fn is as per module_param, not __setup!  Emits warning if fn
+ * returns non-zero. */
+#define early_param(str, fn)					\
+	__setup_param(str, fn, fn, 1)
+
+/* Relies on boot_command_line being set */
+void __init parse_early_param(void);
+void __init parse_early_options(char *cmdline);
+#endif /* __ASSEMBLY__ */
+
+/**
+ * module_init() - driver initialization entry point
+ * @x: function to be run at kernel boot time or module insertion
+ * 
+ * module_init() will either be called during do_initcalls() (if
+ * builtin) or at module insertion time (if a module).  There can only
+ * be one per module.
+ */
+#define module_init(x)	__initcall(x);
+
+/**
+ * module_exit() - driver exit entry point
+ * @x: function to be run when driver is removed
+ * 
+ * module_exit() will wrap the driver clean-up code
+ * with cleanup_module() when used with rmmod when
+ * the driver is a module.  If the driver is statically
+ * compiled into the kernel, module_exit() has no effect.
+ * There can only be one per module.
+ */
+#define module_exit(x)	__exitcall(x);
+
+#else /* MODULE */
+
+/* Don't use these in modules, but some people do... */
+#define early_initcall(fn)		module_init(fn)
+#define core_initcall(fn)		module_init(fn)
+#define postcore_initcall(fn)		module_init(fn)
+#define arch_initcall(fn)		module_init(fn)
+#define subsys_initcall(fn)		module_init(fn)
+#define fs_initcall(fn)			module_init(fn)
+#define device_initcall(fn)		module_init(fn)
+#define late_initcall(fn)		module_init(fn)
+
+#define security_initcall(fn)		module_init(fn)
+
+/* Each module must use one module_init(). */
+#define module_init(initfn)					\
+	static inline initcall_t __inittest(void)		\
+	{ return initfn; }					\
+	int init_module(void) __attribute__((alias(#initfn)));
+
+/* This is only required if you want to be unloadable. */
+#define module_exit(exitfn)					\
+	static inline exitcall_t __exittest(void)		\
+	{ return exitfn; }					\
+	void cleanup_module(void) __attribute__((alias(#exitfn)));
+
+#define __setup_param(str, unique_id, fn)	/* nothing */
+#define __setup(str, func) 			/* nothing */
+#endif
+
+/* Data marked not to be saved by software suspend */
+#define __nosavedata __section(.data..nosave)
+
+/* This means "can be init if no module support, otherwise module load
+   may call it." */
+#ifdef CONFIG_MODULES
+#define __init_or_module
+#define __initdata_or_module
+#define __initconst_or_module
+#define __INIT_OR_MODULE	.text
+#define __INITDATA_OR_MODULE	.data
+#define __INITRODATA_OR_MODULE	.section ".rodata","a",%progbits
+#else
+#define __init_or_module __init
+#define __initdata_or_module __initdata
+#define __initconst_or_module __initconst
+#define __INIT_OR_MODULE __INIT
+#define __INITDATA_OR_MODULE __INITDATA
+#define __INITRODATA_OR_MODULE __INITRODATA
+#endif /*CONFIG_MODULES*/
+
+/* Functions marked as __devexit may be discarded at kernel link time, depending
+   on config options.  Newer versions of binutils detect references from
+   retained sections to discarded sections and flag an error.  Pointers to
+   __devexit functions must use __devexit_p(function_name), the wrapper will
+   insert either the function_name or NULL, depending on the config options.
+ */
+#if defined(MODULE) || defined(CONFIG_HOTPLUG)
+#define __devexit_p(x) x
+#else
+#define __devexit_p(x) NULL
+#endif
+
+#ifdef MODULE
+#define __exit_p(x) x
+#else
+#define __exit_p(x) NULL
+#endif
+
+#endif /* _LINUX_INIT_H */
diff --git a/include/linux/init_ohci1394_dma.h b/include/linux/init_ohci1394_dma.h
new file mode 100644
index 00000000..3c03a4bb
--- /dev/null
+++ b/include/linux/init_ohci1394_dma.h
@@ -0,0 +1,4 @@
+#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
+extern int __initdata init_ohci1394_dma_early;
+extern void __init init_ohci1394_dma_on_all_controllers(void);
+#endif
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
new file mode 100644
index 00000000..e4baff5f
--- /dev/null
+++ b/include/linux/init_task.h
@@ -0,0 +1,217 @@
+#ifndef _LINUX__INIT_TASK_H
+#define _LINUX__INIT_TASK_H
+
+#include <linux/rcupdate.h>
+#include <linux/irqflags.h>
+#include <linux/utsname.h>
+#include <linux/lockdep.h>
+#include <linux/ftrace.h>
+#include <linux/ipc.h>
+#include <linux/pid_namespace.h>
+#include <linux/user_namespace.h>
+#include <linux/securebits.h>
+#include <net/net_namespace.h>
+
+#ifdef CONFIG_SMP
+# define INIT_PUSHABLE_TASKS(tsk)					\
+	.pushable_tasks = PLIST_NODE_INIT(tsk.pushable_tasks, MAX_PRIO),
+#else
+# define INIT_PUSHABLE_TASKS(tsk)
+#endif
+
+extern struct files_struct init_files;
+extern struct fs_struct init_fs;
+
+#ifdef CONFIG_CGROUPS
+#define INIT_GROUP_RWSEM(sig)						\
+	.group_rwsem = __RWSEM_INITIALIZER(sig.group_rwsem),
+#else
+#define INIT_GROUP_RWSEM(sig)
+#endif
+
+#ifdef CONFIG_CPUSETS
+#define INIT_CPUSET_SEQ							\
+	.mems_allowed_seq = SEQCNT_ZERO,
+#else
+#define INIT_CPUSET_SEQ
+#endif
+
+#define INIT_SIGNALS(sig) {						\
+	.nr_threads	= 1,						\
+	.wait_chldexit	= __WAIT_QUEUE_HEAD_INITIALIZER(sig.wait_chldexit),\
+	.shared_pending	= { 						\
+		.list = LIST_HEAD_INIT(sig.shared_pending.list),	\
+		.signal =  {{0}}},					\
+	.posix_timers	 = LIST_HEAD_INIT(sig.posix_timers),		\
+	.cpu_timers	= INIT_CPU_TIMERS(sig.cpu_timers),		\
+	.rlim		= INIT_RLIMITS,					\
+	.cputimer	= { 						\
+		.cputime = INIT_CPUTIME,				\
+		.running = 0,						\
+		.lock = __RAW_SPIN_LOCK_UNLOCKED(sig.cputimer.lock),	\
+	},								\
+	.cred_guard_mutex =						\
+		 __MUTEX_INITIALIZER(sig.cred_guard_mutex),		\
+	INIT_GROUP_RWSEM(sig)						\
+}
+
+extern struct nsproxy init_nsproxy;
+
+#define INIT_SIGHAND(sighand) {						\
+	.count		= ATOMIC_INIT(1), 				\
+	.action		= { { { .sa_handler = SIG_DFL, } }, },		\
+	.siglock	= __SPIN_LOCK_UNLOCKED(sighand.siglock),	\
+	.signalfd_wqh	= __WAIT_QUEUE_HEAD_INITIALIZER(sighand.signalfd_wqh),	\
+}
+
+extern struct group_info init_groups;
+
+#define INIT_STRUCT_PID {						\
+	.count 		= ATOMIC_INIT(1),				\
+	.tasks		= {						\
+		{ .first = NULL },					\
+		{ .first = NULL },					\
+		{ .first = NULL },					\
+	},								\
+	.level		= 0,						\
+	.numbers	= { {						\
+		.nr		= 0,					\
+		.ns		= &init_pid_ns,				\
+		.pid_chain	= { .next = NULL, .pprev = NULL },	\
+	}, }								\
+}
+
+#define INIT_PID_LINK(type) 					\
+{								\
+	.node = {						\
+		.next = NULL,					\
+		.pprev = NULL,					\
+	},							\
+	.pid = &init_struct_pid,				\
+}
+
+#ifdef CONFIG_AUDITSYSCALL
+#define INIT_IDS \
+	.loginuid = -1, \
+	.sessionid = -1,
+#else
+#define INIT_IDS
+#endif
+
+#ifdef CONFIG_RCU_BOOST
+#define INIT_TASK_RCU_BOOST()						\
+	.rcu_boost_mutex = NULL,
+#else
+#define INIT_TASK_RCU_BOOST()
+#endif
+#ifdef CONFIG_TREE_PREEMPT_RCU
+#define INIT_TASK_RCU_TREE_PREEMPT()					\
+	.rcu_blocked_node = NULL,
+#else
+#define INIT_TASK_RCU_TREE_PREEMPT(tsk)
+#endif
+#ifdef CONFIG_PREEMPT_RCU
+#define INIT_TASK_RCU_PREEMPT(tsk)					\
+	.rcu_read_lock_nesting = 0,					\
+	.rcu_read_unlock_special = 0,					\
+	.rcu_node_entry = LIST_HEAD_INIT(tsk.rcu_node_entry),		\
+	INIT_TASK_RCU_TREE_PREEMPT()					\
+	INIT_TASK_RCU_BOOST()
+#else
+#define INIT_TASK_RCU_PREEMPT(tsk)
+#endif
+
+extern struct cred init_cred;
+
+#ifdef CONFIG_PERF_EVENTS
+# define INIT_PERF_EVENTS(tsk)					\
+	.perf_event_mutex = 						\
+		 __MUTEX_INITIALIZER(tsk.perf_event_mutex),		\
+	.perf_event_list = LIST_HEAD_INIT(tsk.perf_event_list),
+#else
+# define INIT_PERF_EVENTS(tsk)
+#endif
+
+#define INIT_TASK_COMM "swapper"
+
+/*
+ *  INIT_TASK is used to set up the first task table, touch at
+ * your own risk!. Base=0, limit=0x1fffff (=2MB)
+ */
+#define INIT_TASK(tsk)	\
+{									\
+	.state		= 0,						\
+	.stack		= &init_thread_info,				\
+	.usage		= ATOMIC_INIT(2),				\
+	.flags		= PF_KTHREAD,					\
+	.prio		= MAX_PRIO-20,					\
+	.static_prio	= MAX_PRIO-20,					\
+	.normal_prio	= MAX_PRIO-20,					\
+	.policy		= SCHED_NORMAL,					\
+	.cpus_allowed	= CPU_MASK_ALL,					\
+	.mm		= NULL,						\
+	.active_mm	= &init_mm,					\
+	.se		= {						\
+		.group_node 	= LIST_HEAD_INIT(tsk.se.group_node),	\
+	},								\
+	.rt		= {						\
+		.run_list	= LIST_HEAD_INIT(tsk.rt.run_list),	\
+		.time_slice	= RR_TIMESLICE,				\
+		.nr_cpus_allowed = NR_CPUS,				\
+	},								\
+	.tasks		= LIST_HEAD_INIT(tsk.tasks),			\
+	INIT_PUSHABLE_TASKS(tsk)					\
+	.ptraced	= LIST_HEAD_INIT(tsk.ptraced),			\
+	.ptrace_entry	= LIST_HEAD_INIT(tsk.ptrace_entry),		\
+	.real_parent	= &tsk,						\
+	.parent		= &tsk,						\
+	.children	= LIST_HEAD_INIT(tsk.children),			\
+	.sibling	= LIST_HEAD_INIT(tsk.sibling),			\
+	.group_leader	= &tsk,						\
+	RCU_INIT_POINTER(.real_cred, &init_cred),			\
+	RCU_INIT_POINTER(.cred, &init_cred),				\
+	.comm		= INIT_TASK_COMM,				\
+	.thread		= INIT_THREAD,					\
+	.fs		= &init_fs,					\
+	.files		= &init_files,					\
+	.signal		= &init_signals,				\
+	.sighand	= &init_sighand,				\
+	.nsproxy	= &init_nsproxy,				\
+	.pending	= {						\
+		.list = LIST_HEAD_INIT(tsk.pending.list),		\
+		.signal = {{0}}},					\
+	.blocked	= {{0}},					\
+	.alloc_lock	= __SPIN_LOCK_UNLOCKED(tsk.alloc_lock),		\
+	.journal_info	= NULL,						\
+	.cpu_timers	= INIT_CPU_TIMERS(tsk.cpu_timers),		\
+	.pi_lock	= __RAW_SPIN_LOCK_UNLOCKED(tsk.pi_lock),	\
+	.timer_slack_ns = 50000, /* 50 usec default slack */		\
+	.pids = {							\
+		[PIDTYPE_PID]  = INIT_PID_LINK(PIDTYPE_PID),		\
+		[PIDTYPE_PGID] = INIT_PID_LINK(PIDTYPE_PGID),		\
+		[PIDTYPE_SID]  = INIT_PID_LINK(PIDTYPE_SID),		\
+	},								\
+	.thread_group	= LIST_HEAD_INIT(tsk.thread_group),		\
+	INIT_IDS							\
+	INIT_PERF_EVENTS(tsk)						\
+	INIT_TRACE_IRQFLAGS						\
+	INIT_LOCKDEP							\
+	INIT_FTRACE_GRAPH						\
+	INIT_TRACE_RECURSION						\
+	INIT_TASK_RCU_PREEMPT(tsk)					\
+	INIT_CPUSET_SEQ							\
+}
+
+
+#define INIT_CPU_TIMERS(cpu_timers)					\
+{									\
+	LIST_HEAD_INIT(cpu_timers[0]),					\
+	LIST_HEAD_INIT(cpu_timers[1]),					\
+	LIST_HEAD_INIT(cpu_timers[2]),					\
+}
+
+/* Attach to the init_task data structure for proper alignment */
+#define __init_task_data __attribute__((__section__(".data..init_task")))
+
+
+#endif
diff --git a/include/linux/initrd.h b/include/linux/initrd.h
new file mode 100644
index 00000000..55289d26
--- /dev/null
+++ b/include/linux/initrd.h
@@ -0,0 +1,20 @@
+
+#define INITRD_MINOR 250 /* shouldn't collide with /dev/ram* too soon ... */
+
+/* 1 = load ramdisk, 0 = don't load */
+extern int rd_doload;
+
+/* 1 = prompt for ramdisk, 0 = don't prompt */
+extern int rd_prompt;
+
+/* starting block # of image */
+extern int rd_image_start;
+
+/* 1 if it is not an error if initrd_start < memory_start */
+extern int initrd_below_start_ok;
+
+/* free_initrd_mem always gets called with the next two as arguments.. */
+extern unsigned long initrd_start, initrd_end;
+extern void free_initrd_mem(unsigned long, unsigned long);
+
+extern unsigned int real_root_dev;
diff --git a/include/linux/inotify.h b/include/linux/inotify.h
new file mode 100644
index 00000000..d33041e2
--- /dev/null
+++ b/include/linux/inotify.h
@@ -0,0 +1,87 @@
+/*
+ * Inode based directory notification for Linux
+ *
+ * Copyright (C) 2005 John McCutchan
+ */
+
+#ifndef _LINUX_INOTIFY_H
+#define _LINUX_INOTIFY_H
+
+/* For O_CLOEXEC and O_NONBLOCK */
+#include <linux/fcntl.h>
+#include <linux/types.h>
+
+/*
+ * struct inotify_event - structure read from the inotify device for each event
+ *
+ * When you are watching a directory, you will receive the filename for events
+ * such as IN_CREATE, IN_DELETE, IN_OPEN, IN_CLOSE, ..., relative to the wd.
+ */
+struct inotify_event {
+	__s32		wd;		/* watch descriptor */
+	__u32		mask;		/* watch mask */
+	__u32		cookie;		/* cookie to synchronize two events */
+	__u32		len;		/* length (including nulls) of name */
+	char		name[0];	/* stub for possible name */
+};
+
+/* the following are legal, implemented events that user-space can watch for */
+#define IN_ACCESS		0x00000001	/* File was accessed */
+#define IN_MODIFY		0x00000002	/* File was modified */
+#define IN_ATTRIB		0x00000004	/* Metadata changed */
+#define IN_CLOSE_WRITE		0x00000008	/* Writtable file was closed */
+#define IN_CLOSE_NOWRITE	0x00000010	/* Unwrittable file closed */
+#define IN_OPEN			0x00000020	/* File was opened */
+#define IN_MOVED_FROM		0x00000040	/* File was moved from X */
+#define IN_MOVED_TO		0x00000080	/* File was moved to Y */
+#define IN_CREATE		0x00000100	/* Subfile was created */
+#define IN_DELETE		0x00000200	/* Subfile was deleted */
+#define IN_DELETE_SELF		0x00000400	/* Self was deleted */
+#define IN_MOVE_SELF		0x00000800	/* Self was moved */
+
+/* the following are legal events.  they are sent as needed to any watch */
+#define IN_UNMOUNT		0x00002000	/* Backing fs was unmounted */
+#define IN_Q_OVERFLOW		0x00004000	/* Event queued overflowed */
+#define IN_IGNORED		0x00008000	/* File was ignored */
+
+/* helper events */
+#define IN_CLOSE		(IN_CLOSE_WRITE | IN_CLOSE_NOWRITE) /* close */
+#define IN_MOVE			(IN_MOVED_FROM | IN_MOVED_TO) /* moves */
+
+/* special flags */
+#define IN_ONLYDIR		0x01000000	/* only watch the path if it is a directory */
+#define IN_DONT_FOLLOW		0x02000000	/* don't follow a sym link */
+#define IN_EXCL_UNLINK		0x04000000	/* exclude events on unlinked objects */
+#define IN_MASK_ADD		0x20000000	/* add to the mask of an already existing watch */
+#define IN_ISDIR		0x40000000	/* event occurred against dir */
+#define IN_ONESHOT		0x80000000	/* only send event once */
+
+/*
+ * All of the events - we build the list by hand so that we can add flags in
+ * the future and not break backward compatibility.  Apps will get only the
+ * events that they originally wanted.  Be sure to add new events here!
+ */
+#define IN_ALL_EVENTS	(IN_ACCESS | IN_MODIFY | IN_ATTRIB | IN_CLOSE_WRITE | \
+			 IN_CLOSE_NOWRITE | IN_OPEN | IN_MOVED_FROM | \
+			 IN_MOVED_TO | IN_DELETE | IN_CREATE | IN_DELETE_SELF | \
+			 IN_MOVE_SELF)
+
+/* Flags for sys_inotify_init1.  */
+#define IN_CLOEXEC O_CLOEXEC
+#define IN_NONBLOCK O_NONBLOCK
+
+#ifdef __KERNEL__
+#include <linux/sysctl.h>
+extern struct ctl_table inotify_table[]; /* for sysctl */
+
+#define ALL_INOTIFY_BITS (IN_ACCESS | IN_MODIFY | IN_ATTRIB | IN_CLOSE_WRITE | \
+			  IN_CLOSE_NOWRITE | IN_OPEN | IN_MOVED_FROM | \
+			  IN_MOVED_TO | IN_CREATE | IN_DELETE | \
+			  IN_DELETE_SELF | IN_MOVE_SELF | IN_UNMOUNT | \
+			  IN_Q_OVERFLOW | IN_IGNORED | IN_ONLYDIR | \
+			  IN_DONT_FOLLOW | IN_EXCL_UNLINK | IN_MASK_ADD | \
+			  IN_ISDIR | IN_ONESHOT)
+
+#endif
+
+#endif	/* _LINUX_INOTIFY_H */
diff --git a/include/linux/input-polldev.h b/include/linux/input-polldev.h
new file mode 100644
index 00000000..ce0b7246
--- /dev/null
+++ b/include/linux/input-polldev.h
@@ -0,0 +1,58 @@
+#ifndef _INPUT_POLLDEV_H
+#define _INPUT_POLLDEV_H
+
+/*
+ * Copyright (c) 2007 Dmitry Torokhov
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/input.h>
+#include <linux/workqueue.h>
+
+/**
+ * struct input_polled_dev - simple polled input device
+ * @private: private driver data.
+ * @open: driver-supplied method that prepares device for polling
+ *	(enabled the device and maybe flushes device state).
+ * @close: driver-supplied method that is called when device is no
+ *	longer being polled. Used to put device into low power mode.
+ * @poll: driver-supplied method that polls the device and posts
+ *	input events (mandatory).
+ * @poll_interval: specifies how often the poll() method should be called.
+ *	Defaults to 500 msec unless overridden when registering the device.
+ * @poll_interval_max: specifies upper bound for the poll interval.
+ *	Defaults to the initial value of @poll_interval.
+ * @poll_interval_min: specifies lower bound for the poll interval.
+ *	Defaults to 0.
+ * @input: input device structure associated with the polled device.
+ *	Must be properly initialized by the driver (id, name, phys, bits).
+ *
+ * Polled input device provides a skeleton for supporting simple input
+ * devices that do not raise interrupts but have to be periodically
+ * scanned or polled to detect changes in their state.
+ */
+struct input_polled_dev {
+	void *private;
+
+	void (*open)(struct input_polled_dev *dev);
+	void (*close)(struct input_polled_dev *dev);
+	void (*poll)(struct input_polled_dev *dev);
+	unsigned int poll_interval; /* msec */
+	unsigned int poll_interval_max; /* msec */
+	unsigned int poll_interval_min; /* msec */
+
+	struct input_dev *input;
+
+/* private: */
+	struct delayed_work work;
+};
+
+struct input_polled_dev *input_allocate_polled_device(void);
+void input_free_polled_device(struct input_polled_dev *dev);
+int input_register_polled_device(struct input_polled_dev *dev);
+void input_unregister_polled_device(struct input_polled_dev *dev);
+
+#endif
diff --git a/include/linux/input.h b/include/linux/input.h
new file mode 100644
index 00000000..49fb20e3
--- /dev/null
+++ b/include/linux/input.h
@@ -0,0 +1,1656 @@
+#ifndef _INPUT_H
+#define _INPUT_H
+
+/*
+ * Copyright (c) 1999-2002 Vojtech Pavlik
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifdef __KERNEL__
+#include <linux/time.h>
+#include <linux/list.h>
+#else
+#include <sys/time.h>
+#include <sys/ioctl.h>
+#include <sys/types.h>
+#include <linux/types.h>
+#endif
+
+/*
+ * The event structure itself
+ */
+
+struct input_event {
+	struct timeval time;
+	__u16 type;
+	__u16 code;
+	__s32 value;
+};
+
+/*
+ * Protocol version.
+ */
+
+#define EV_VERSION		0x010001
+
+/*
+ * IOCTLs (0x00 - 0x7f)
+ */
+
+struct input_id {
+	__u16 bustype;
+	__u16 vendor;
+	__u16 product;
+	__u16 version;
+};
+
+/**
+ * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls
+ * @value: latest reported value for the axis.
+ * @minimum: specifies minimum value for the axis.
+ * @maximum: specifies maximum value for the axis.
+ * @fuzz: specifies fuzz value that is used to filter noise from
+ *	the event stream.
+ * @flat: values that are within this value will be discarded by
+ *	joydev interface and reported as 0 instead.
+ * @resolution: specifies resolution for the values reported for
+ *	the axis.
+ *
+ * Note that input core does not clamp reported values to the
+ * [minimum, maximum] limits, such task is left to userspace.
+ *
+ * Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in
+ * units per millimeter (units/mm), resolution for rotational axes
+ * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian.
+ */
+struct input_absinfo {
+	__s32 value;
+	__s32 minimum;
+	__s32 maximum;
+	__s32 fuzz;
+	__s32 flat;
+	__s32 resolution;
+};
+
+/**
+ * struct input_keymap_entry - used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls
+ * @scancode: scancode represented in machine-endian form.
+ * @len: length of the scancode that resides in @scancode buffer.
+ * @index: index in the keymap, may be used instead of scancode
+ * @flags: allows to specify how kernel should handle the request. For
+ *	example, setting INPUT_KEYMAP_BY_INDEX flag indicates that kernel
+ *	should perform lookup in keymap by @index instead of @scancode
+ * @keycode: key code assigned to this scancode
+ *
+ * The structure is used to retrieve and modify keymap data. Users have
+ * option of performing lookup either by @scancode itself or by @index
+ * in keymap entry. EVIOCGKEYCODE will also return scancode or index
+ * (depending on which element was used to perform lookup).
+ */
+struct input_keymap_entry {
+#define INPUT_KEYMAP_BY_INDEX	(1 << 0)
+	__u8  flags;
+	__u8  len;
+	__u16 index;
+	__u32 keycode;
+	__u8  scancode[32];
+};
+
+#define EVIOCGVERSION		_IOR('E', 0x01, int)			/* get driver version */
+#define EVIOCGID		_IOR('E', 0x02, struct input_id)	/* get device ID */
+#define EVIOCGREP		_IOR('E', 0x03, unsigned int[2])	/* get repeat settings */
+#define EVIOCSREP		_IOW('E', 0x03, unsigned int[2])	/* set repeat settings */
+
+#define EVIOCGKEYCODE		_IOR('E', 0x04, unsigned int[2])        /* get keycode */
+#define EVIOCGKEYCODE_V2	_IOR('E', 0x04, struct input_keymap_entry)
+#define EVIOCSKEYCODE		_IOW('E', 0x04, unsigned int[2])        /* set keycode */
+#define EVIOCSKEYCODE_V2	_IOW('E', 0x04, struct input_keymap_entry)
+
+#define EVIOCGNAME(len)		_IOC(_IOC_READ, 'E', 0x06, len)		/* get device name */
+#define EVIOCGPHYS(len)		_IOC(_IOC_READ, 'E', 0x07, len)		/* get physical location */
+#define EVIOCGUNIQ(len)		_IOC(_IOC_READ, 'E', 0x08, len)		/* get unique identifier */
+#define EVIOCGPROP(len)		_IOC(_IOC_READ, 'E', 0x09, len)		/* get device properties */
+
+/**
+ * EVIOCGMTSLOTS(len) - get MT slot values
+ *
+ * The ioctl buffer argument should be binary equivalent to
+ *
+ * struct input_mt_request_layout {
+ *	__u32 code;
+ *	__s32 values[num_slots];
+ * };
+ *
+ * where num_slots is the (arbitrary) number of MT slots to extract.
+ *
+ * The ioctl size argument (len) is the size of the buffer, which
+ * should satisfy len = (num_slots + 1) * sizeof(__s32).  If len is
+ * too small to fit all available slots, the first num_slots are
+ * returned.
+ *
+ * Before the call, code is set to the wanted ABS_MT event type. On
+ * return, values[] is filled with the slot values for the specified
+ * ABS_MT code.
+ *
+ * If the request code is not an ABS_MT value, -EINVAL is returned.
+ */
+#define EVIOCGMTSLOTS(len)	_IOC(_IOC_READ, 'E', 0x0a, len)
+
+#define EVIOCGKEY(len)		_IOC(_IOC_READ, 'E', 0x18, len)		/* get global key state */
+#define EVIOCGLED(len)		_IOC(_IOC_READ, 'E', 0x19, len)		/* get all LEDs */
+#define EVIOCGSND(len)		_IOC(_IOC_READ, 'E', 0x1a, len)		/* get all sounds status */
+#define EVIOCGSW(len)		_IOC(_IOC_READ, 'E', 0x1b, len)		/* get all switch states */
+
+#define EVIOCGBIT(ev,len)	_IOC(_IOC_READ, 'E', 0x20 + (ev), len)	/* get event bits */
+#define EVIOCGABS(abs)		_IOR('E', 0x40 + (abs), struct input_absinfo)	/* get abs value/limits */
+#define EVIOCSABS(abs)		_IOW('E', 0xc0 + (abs), struct input_absinfo)	/* set abs value/limits */
+
+#define EVIOCSFF		_IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect))	/* send a force effect to a force feedback device */
+#define EVIOCRMFF		_IOW('E', 0x81, int)			/* Erase a force effect */
+#define EVIOCGEFFECTS		_IOR('E', 0x84, int)			/* Report number of effects playable at the same time */
+
+#define EVIOCGRAB		_IOW('E', 0x90, int)			/* Grab/Release device */
+
+#define EVIOCGSUSPENDBLOCK	_IOR('E', 0x91, int)			/* get suspend block enable */
+#define EVIOCSSUSPENDBLOCK	_IOW('E', 0x91, int)			/* set suspend block enable */
+
+#define EVIOCSCLOCKID		_IOW('E', 0xa0, int)			/* Set clockid to be used for timestamps */
+
+/*
+ * Device properties and quirks
+ */
+
+#define INPUT_PROP_POINTER		0x00	/* needs a pointer */
+#define INPUT_PROP_DIRECT		0x01	/* direct input devices */
+#define INPUT_PROP_BUTTONPAD		0x02	/* has button(s) under pad */
+#define INPUT_PROP_SEMI_MT		0x03	/* touch rectangle only */
+
+#define INPUT_PROP_MAX			0x1f
+#define INPUT_PROP_CNT			(INPUT_PROP_MAX + 1)
+
+/*
+ * Event types
+ */
+
+#define EV_SYN			0x00
+#define EV_KEY			0x01
+#define EV_REL			0x02
+#define EV_ABS			0x03
+#define EV_MSC			0x04
+#define EV_SW			0x05
+#define EV_LED			0x11
+#define EV_SND			0x12
+#define EV_REP			0x14
+#define EV_FF			0x15
+#define EV_PWR			0x16
+#define EV_FF_STATUS		0x17
+#define EV_MAX			0x1f
+#define EV_CNT			(EV_MAX+1)
+
+/*
+ * Synchronization events.
+ */
+
+#define SYN_REPORT		0
+#define SYN_CONFIG		1
+#define SYN_MT_REPORT		2
+#define SYN_DROPPED		3
+
+/*
+ * Keys and buttons
+ *
+ * Most of the keys/buttons are modeled after USB HUT 1.12
+ * (see http://www.usb.org/developers/hidpage).
+ * Abbreviations in the comments:
+ * AC - Application Control
+ * AL - Application Launch Button
+ * SC - System Control
+ */
+
+#define KEY_RESERVED		0
+#define KEY_ESC			1
+#define KEY_1			2
+#define KEY_2			3
+#define KEY_3			4
+#define KEY_4			5
+#define KEY_5			6
+#define KEY_6			7
+#define KEY_7			8
+#define KEY_8			9
+#define KEY_9			10
+#define KEY_0			11
+#define KEY_MINUS		12
+#define KEY_EQUAL		13
+#define KEY_BACKSPACE		14
+#define KEY_TAB			15
+#define KEY_Q			16
+#define KEY_W			17
+#define KEY_E			18
+#define KEY_R			19
+#define KEY_T			20
+#define KEY_Y			21
+#define KEY_U			22
+#define KEY_I			23
+#define KEY_O			24
+#define KEY_P			25
+#define KEY_LEFTBRACE		26
+#define KEY_RIGHTBRACE		27
+#define KEY_ENTER		28
+#define KEY_LEFTCTRL		29
+#define KEY_A			30
+#define KEY_S			31
+#define KEY_D			32
+#define KEY_F			33
+#define KEY_G			34
+#define KEY_H			35
+#define KEY_J			36
+#define KEY_K			37
+#define KEY_L			38
+#define KEY_SEMICOLON		39
+#define KEY_APOSTROPHE		40
+#define KEY_GRAVE		41
+#define KEY_LEFTSHIFT		42
+#define KEY_BACKSLASH		43
+#define KEY_Z			44
+#define KEY_X			45
+#define KEY_C			46
+#define KEY_V			47
+#define KEY_B			48
+#define KEY_N			49
+#define KEY_M			50
+#define KEY_COMMA		51
+#define KEY_DOT			52
+#define KEY_SLASH		53
+#define KEY_RIGHTSHIFT		54
+#define KEY_KPASTERISK		55
+#define KEY_LEFTALT		56
+#define KEY_SPACE		57
+#define KEY_CAPSLOCK		58
+#define KEY_F1			59
+#define KEY_F2			60
+#define KEY_F3			61
+#define KEY_F4			62
+#define KEY_F5			63
+#define KEY_F6			64
+#define KEY_F7			65
+#define KEY_F8			66
+#define KEY_F9			67
+#define KEY_F10			68
+#define KEY_NUMLOCK		69
+#define KEY_SCROLLLOCK		70
+#define KEY_KP7			71
+#define KEY_KP8			72
+#define KEY_KP9			73
+#define KEY_KPMINUS		74
+#define KEY_KP4			75
+#define KEY_KP5			76
+#define KEY_KP6			77
+#define KEY_KPPLUS		78
+#define KEY_KP1			79
+#define KEY_KP2			80
+#define KEY_KP3			81
+#define KEY_KP0			82
+#define KEY_KPDOT		83
+
+#define KEY_ZENKAKUHANKAKU	85
+#define KEY_102ND		86
+#define KEY_F11			87
+#define KEY_F12			88
+#define KEY_RO			89
+#define KEY_KATAKANA		90
+#define KEY_HIRAGANA		91
+#define KEY_HENKAN		92
+#define KEY_KATAKANAHIRAGANA	93
+#define KEY_MUHENKAN		94
+#define KEY_KPJPCOMMA		95
+#define KEY_KPENTER		96
+#define KEY_RIGHTCTRL		97
+#define KEY_KPSLASH		98
+#define KEY_SYSRQ		99
+#define KEY_RIGHTALT		100
+#define KEY_LINEFEED		101
+#define KEY_HOME		102
+#define KEY_UP			103
+#define KEY_PAGEUP		104
+#define KEY_LEFT		105
+#define KEY_RIGHT		106
+#define KEY_END			107
+#define KEY_DOWN		108
+#define KEY_PAGEDOWN		109
+#define KEY_INSERT		110
+#define KEY_DELETE		111
+#define KEY_MACRO		112
+#define KEY_MUTE		113
+#define KEY_VOLUMEDOWN		114
+#define KEY_VOLUMEUP		115
+#define KEY_POWER		116	/* SC System Power Down */
+#define KEY_KPEQUAL		117
+#define KEY_KPPLUSMINUS		118
+#define KEY_PAUSE		119
+#define KEY_SCALE		120	/* AL Compiz Scale (Expose) */
+
+#define KEY_KPCOMMA		121
+#define KEY_HANGEUL		122
+#define KEY_HANGUEL		KEY_HANGEUL
+#define KEY_HANJA		123
+#define KEY_YEN			124
+#define KEY_LEFTMETA		125
+#define KEY_RIGHTMETA		126
+#define KEY_COMPOSE		127
+
+#define KEY_STOP		128	/* AC Stop */
+#define KEY_AGAIN		129
+#define KEY_PROPS		130	/* AC Properties */
+#define KEY_UNDO		131	/* AC Undo */
+#define KEY_FRONT		132
+#define KEY_COPY		133	/* AC Copy */
+#define KEY_OPEN		134	/* AC Open */
+#define KEY_PASTE		135	/* AC Paste */
+#define KEY_FIND		136	/* AC Search */
+#define KEY_CUT			137	/* AC Cut */
+#define KEY_HELP		138	/* AL Integrated Help Center */
+#define KEY_MENU		139	/* Menu (show menu) */
+#define KEY_CALC		140	/* AL Calculator */
+#define KEY_SETUP		141
+#define KEY_SLEEP		142	/* SC System Sleep */
+#define KEY_WAKEUP		143	/* System Wake Up */
+#define KEY_FILE		144	/* AL Local Machine Browser */
+#define KEY_SENDFILE		145
+#define KEY_DELETEFILE		146
+#define KEY_XFER		147
+#define KEY_PROG1		148
+#define KEY_PROG2		149
+#define KEY_WWW			150	/* AL Internet Browser */
+#define KEY_MSDOS		151
+#define KEY_COFFEE		152	/* AL Terminal Lock/Screensaver */
+#define KEY_SCREENLOCK		KEY_COFFEE
+#define KEY_DIRECTION		153
+#define KEY_CYCLEWINDOWS	154
+#define KEY_MAIL		155
+#define KEY_BOOKMARKS		156	/* AC Bookmarks */
+#define KEY_COMPUTER		157
+#define KEY_BACK		158	/* AC Back */
+#define KEY_FORWARD		159	/* AC Forward */
+#define KEY_CLOSECD		160
+#define KEY_EJECTCD		161
+#define KEY_EJECTCLOSECD	162
+#define KEY_NEXTSONG		163
+#define KEY_PLAYPAUSE		164
+#define KEY_PREVIOUSSONG	165
+#define KEY_STOPCD		166
+#define KEY_RECORD		167
+#define KEY_REWIND		168
+#define KEY_PHONE		169	/* Media Select Telephone */
+#define KEY_ISO			170
+#define KEY_CONFIG		171	/* AL Consumer Control Configuration */
+#define KEY_HOMEPAGE		172	/* AC Home */
+#define KEY_REFRESH		173	/* AC Refresh */
+#define KEY_EXIT		174	/* AC Exit */
+#define KEY_MOVE		175
+#define KEY_EDIT		176
+#define KEY_SCROLLUP		177
+#define KEY_SCROLLDOWN		178
+#define KEY_KPLEFTPAREN		179
+#define KEY_KPRIGHTPAREN	180
+#define KEY_NEW			181	/* AC New */
+#define KEY_REDO		182	/* AC Redo/Repeat */
+
+#define KEY_F13			183
+#define KEY_F14			184
+#define KEY_F15			185
+#define KEY_F16			186
+#define KEY_F17			187
+#define KEY_F18			188
+#define KEY_F19			189
+#define KEY_F20			190
+#define KEY_F21			191
+#define KEY_F22			192
+#define KEY_F23			193
+#define KEY_F24			194
+
+#define KEY_PLAYCD		200
+#define KEY_PAUSECD		201
+#define KEY_PROG3		202
+#define KEY_PROG4		203
+#define KEY_DASHBOARD		204	/* AL Dashboard */
+#define KEY_SUSPEND		205
+#define KEY_CLOSE		206	/* AC Close */
+#define KEY_PLAY		207
+#define KEY_FASTFORWARD		208
+#define KEY_BASSBOOST		209
+#define KEY_PRINT		210	/* AC Print */
+#define KEY_HP			211
+#define KEY_CAMERA		212
+#define KEY_SOUND		213
+#define KEY_QUESTION		214
+#define KEY_EMAIL		215
+#define KEY_CHAT		216
+#define KEY_SEARCH		217
+#define KEY_CONNECT		218
+#define KEY_FINANCE		219	/* AL Checkbook/Finance */
+#define KEY_SPORT		220
+#define KEY_SHOP		221
+#define KEY_ALTERASE		222
+#define KEY_CANCEL		223	/* AC Cancel */
+#define KEY_BRIGHTNESSDOWN	224
+#define KEY_BRIGHTNESSUP	225
+#define KEY_MEDIA		226
+
+#define KEY_SWITCHVIDEOMODE	227	/* Cycle between available video
+					   outputs (Monitor/LCD/TV-out/etc) */
+#define KEY_KBDILLUMTOGGLE	228
+#define KEY_KBDILLUMDOWN	229
+#define KEY_KBDILLUMUP		230
+
+#define KEY_SEND		231	/* AC Send */
+#define KEY_REPLY		232	/* AC Reply */
+#define KEY_FORWARDMAIL		233	/* AC Forward Msg */
+#define KEY_SAVE		234	/* AC Save */
+#define KEY_DOCUMENTS		235
+
+#define KEY_BATTERY		236
+
+#define KEY_BLUETOOTH		237
+#define KEY_WLAN		238
+#define KEY_UWB			239
+
+#define KEY_UNKNOWN		240
+
+#define KEY_VIDEO_NEXT		241	/* drive next video source */
+#define KEY_VIDEO_PREV		242	/* drive previous video source */
+#define KEY_BRIGHTNESS_CYCLE	243	/* brightness up, after max is min */
+#define KEY_BRIGHTNESS_ZERO	244	/* brightness off, use ambient */
+#define KEY_DISPLAY_OFF		245	/* display device to off state */
+
+#define KEY_WIMAX		246
+#define KEY_RFKILL		247	/* Key that controls all radios */
+
+#define KEY_MICMUTE		248	/* Mute / unmute the microphone */
+
+/* Code 255 is reserved for special needs of AT keyboard driver */
+
+#define BTN_MISC		0x100
+#define BTN_0			0x100
+#define BTN_1			0x101
+#define BTN_2			0x102
+#define BTN_3			0x103
+#define BTN_4			0x104
+#define BTN_5			0x105
+#define BTN_6			0x106
+#define BTN_7			0x107
+#define BTN_8			0x108
+#define BTN_9			0x109
+
+#define BTN_MOUSE		0x110
+#define BTN_LEFT		0x110
+#define BTN_RIGHT		0x111
+#define BTN_MIDDLE		0x112
+#define BTN_SIDE		0x113
+#define BTN_EXTRA		0x114
+#define BTN_FORWARD		0x115
+#define BTN_BACK		0x116
+#define BTN_TASK		0x117
+
+#define BTN_JOYSTICK		0x120
+#define BTN_TRIGGER		0x120
+#define BTN_THUMB		0x121
+#define BTN_THUMB2		0x122
+#define BTN_TOP			0x123
+#define BTN_TOP2		0x124
+#define BTN_PINKIE		0x125
+#define BTN_BASE		0x126
+#define BTN_BASE2		0x127
+#define BTN_BASE3		0x128
+#define BTN_BASE4		0x129
+#define BTN_BASE5		0x12a
+#define BTN_BASE6		0x12b
+#define BTN_DEAD		0x12f
+
+#define BTN_GAMEPAD		0x130
+#define BTN_A			0x130
+#define BTN_B			0x131
+#define BTN_C			0x132
+#define BTN_X			0x133
+#define BTN_Y			0x134
+#define BTN_Z			0x135
+#define BTN_TL			0x136
+#define BTN_TR			0x137
+#define BTN_TL2			0x138
+#define BTN_TR2			0x139
+#define BTN_SELECT		0x13a
+#define BTN_START		0x13b
+#define BTN_MODE		0x13c
+#define BTN_THUMBL		0x13d
+#define BTN_THUMBR		0x13e
+
+#define BTN_DIGI		0x140
+#define BTN_TOOL_PEN		0x140
+#define BTN_TOOL_RUBBER		0x141
+#define BTN_TOOL_BRUSH		0x142
+#define BTN_TOOL_PENCIL		0x143
+#define BTN_TOOL_AIRBRUSH	0x144
+#define BTN_TOOL_FINGER		0x145
+#define BTN_TOOL_MOUSE		0x146
+#define BTN_TOOL_LENS		0x147
+#define BTN_TOOL_QUINTTAP	0x148	/* Five fingers on trackpad */
+#define BTN_TOUCH		0x14a
+#define BTN_STYLUS		0x14b
+#define BTN_STYLUS2		0x14c
+#define BTN_TOOL_DOUBLETAP	0x14d
+#define BTN_TOOL_TRIPLETAP	0x14e
+#define BTN_TOOL_QUADTAP	0x14f	/* Four fingers on trackpad */
+
+#define BTN_WHEEL		0x150
+#define BTN_GEAR_DOWN		0x150
+#define BTN_GEAR_UP		0x151
+
+#define KEY_OK			0x160
+#define KEY_SELECT		0x161
+#define KEY_GOTO		0x162
+#define KEY_CLEAR		0x163
+#define KEY_POWER2		0x164
+#define KEY_OPTION		0x165
+#define KEY_INFO		0x166	/* AL OEM Features/Tips/Tutorial */
+#define KEY_TIME		0x167
+#define KEY_VENDOR		0x168
+#define KEY_ARCHIVE		0x169
+#define KEY_PROGRAM		0x16a	/* Media Select Program Guide */
+#define KEY_CHANNEL		0x16b
+#define KEY_FAVORITES		0x16c
+#define KEY_EPG			0x16d
+#define KEY_PVR			0x16e	/* Media Select Home */
+#define KEY_MHP			0x16f
+#define KEY_LANGUAGE		0x170
+#define KEY_TITLE		0x171
+#define KEY_SUBTITLE		0x172
+#define KEY_ANGLE		0x173
+#define KEY_ZOOM		0x174
+#define KEY_MODE		0x175
+#define KEY_KEYBOARD		0x176
+#define KEY_SCREEN		0x177
+#define KEY_PC			0x178	/* Media Select Computer */
+#define KEY_TV			0x179	/* Media Select TV */
+#define KEY_TV2			0x17a	/* Media Select Cable */
+#define KEY_VCR			0x17b	/* Media Select VCR */
+#define KEY_VCR2		0x17c	/* VCR Plus */
+#define KEY_SAT			0x17d	/* Media Select Satellite */
+#define KEY_SAT2		0x17e
+#define KEY_CD			0x17f	/* Media Select CD */
+#define KEY_TAPE		0x180	/* Media Select Tape */
+#define KEY_RADIO		0x181
+#define KEY_TUNER		0x182	/* Media Select Tuner */
+#define KEY_PLAYER		0x183
+#define KEY_TEXT		0x184
+#define KEY_DVD			0x185	/* Media Select DVD */
+#define KEY_AUX			0x186
+#define KEY_MP3			0x187
+#define KEY_AUDIO		0x188	/* AL Audio Browser */
+#define KEY_VIDEO		0x189	/* AL Movie Browser */
+#define KEY_DIRECTORY		0x18a
+#define KEY_LIST		0x18b
+#define KEY_MEMO		0x18c	/* Media Select Messages */
+#define KEY_CALENDAR		0x18d
+#define KEY_RED			0x18e
+#define KEY_GREEN		0x18f
+#define KEY_YELLOW		0x190
+#define KEY_BLUE		0x191
+#define KEY_CHANNELUP		0x192	/* Channel Increment */
+#define KEY_CHANNELDOWN		0x193	/* Channel Decrement */
+#define KEY_FIRST		0x194
+#define KEY_LAST		0x195	/* Recall Last */
+#define KEY_AB			0x196
+#define KEY_NEXT		0x197
+#define KEY_RESTART		0x198
+#define KEY_SLOW		0x199
+#define KEY_SHUFFLE		0x19a
+#define KEY_BREAK		0x19b
+#define KEY_PREVIOUS		0x19c
+#define KEY_DIGITS		0x19d
+#define KEY_TEEN		0x19e
+#define KEY_TWEN		0x19f
+#define KEY_VIDEOPHONE		0x1a0	/* Media Select Video Phone */
+#define KEY_GAMES		0x1a1	/* Media Select Games */
+#define KEY_ZOOMIN		0x1a2	/* AC Zoom In */
+#define KEY_ZOOMOUT		0x1a3	/* AC Zoom Out */
+#define KEY_ZOOMRESET		0x1a4	/* AC Zoom */
+#define KEY_WORDPROCESSOR	0x1a5	/* AL Word Processor */
+#define KEY_EDITOR		0x1a6	/* AL Text Editor */
+#define KEY_SPREADSHEET		0x1a7	/* AL Spreadsheet */
+#define KEY_GRAPHICSEDITOR	0x1a8	/* AL Graphics Editor */
+#define KEY_PRESENTATION	0x1a9	/* AL Presentation App */
+#define KEY_DATABASE		0x1aa	/* AL Database App */
+#define KEY_NEWS		0x1ab	/* AL Newsreader */
+#define KEY_VOICEMAIL		0x1ac	/* AL Voicemail */
+#define KEY_ADDRESSBOOK		0x1ad	/* AL Contacts/Address Book */
+#define KEY_MESSENGER		0x1ae	/* AL Instant Messaging */
+#define KEY_DISPLAYTOGGLE	0x1af	/* Turn display (LCD) on and off */
+#define KEY_SPELLCHECK		0x1b0   /* AL Spell Check */
+#define KEY_LOGOFF		0x1b1   /* AL Logoff */
+
+#define KEY_DOLLAR		0x1b2
+#define KEY_EURO		0x1b3
+
+#define KEY_FRAMEBACK		0x1b4	/* Consumer - transport controls */
+#define KEY_FRAMEFORWARD	0x1b5
+#define KEY_CONTEXT_MENU	0x1b6	/* GenDesc - system context menu */
+#define KEY_MEDIA_REPEAT	0x1b7	/* Consumer - transport control */
+#define KEY_10CHANNELSUP	0x1b8	/* 10 channels up (10+) */
+#define KEY_10CHANNELSDOWN	0x1b9	/* 10 channels down (10-) */
+#define KEY_IMAGES		0x1ba	/* AL Image Browser */
+
+#define KEY_DEL_EOL		0x1c0
+#define KEY_DEL_EOS		0x1c1
+#define KEY_INS_LINE		0x1c2
+#define KEY_DEL_LINE		0x1c3
+
+#define KEY_FN			0x1d0
+#define KEY_FN_ESC		0x1d1
+#define KEY_FN_F1		0x1d2
+#define KEY_FN_F2		0x1d3
+#define KEY_FN_F3		0x1d4
+#define KEY_FN_F4		0x1d5
+#define KEY_FN_F5		0x1d6
+#define KEY_FN_F6		0x1d7
+#define KEY_FN_F7		0x1d8
+#define KEY_FN_F8		0x1d9
+#define KEY_FN_F9		0x1da
+#define KEY_FN_F10		0x1db
+#define KEY_FN_F11		0x1dc
+#define KEY_FN_F12		0x1dd
+#define KEY_FN_1		0x1de
+#define KEY_FN_2		0x1df
+#define KEY_FN_D		0x1e0
+#define KEY_FN_E		0x1e1
+#define KEY_FN_F		0x1e2
+#define KEY_FN_S		0x1e3
+#define KEY_FN_B		0x1e4
+
+#define KEY_BRL_DOT1		0x1f1
+#define KEY_BRL_DOT2		0x1f2
+#define KEY_BRL_DOT3		0x1f3
+#define KEY_BRL_DOT4		0x1f4
+#define KEY_BRL_DOT5		0x1f5
+#define KEY_BRL_DOT6		0x1f6
+#define KEY_BRL_DOT7		0x1f7
+#define KEY_BRL_DOT8		0x1f8
+#define KEY_BRL_DOT9		0x1f9
+#define KEY_BRL_DOT10		0x1fa
+
+#define KEY_NUMERIC_0		0x200	/* used by phones, remote controls, */
+#define KEY_NUMERIC_1		0x201	/* and other keypads */
+#define KEY_NUMERIC_2		0x202
+#define KEY_NUMERIC_3		0x203
+#define KEY_NUMERIC_4		0x204
+#define KEY_NUMERIC_5		0x205
+#define KEY_NUMERIC_6		0x206
+#define KEY_NUMERIC_7		0x207
+#define KEY_NUMERIC_8		0x208
+#define KEY_NUMERIC_9		0x209
+#define KEY_NUMERIC_STAR	0x20a
+#define KEY_NUMERIC_POUND	0x20b
+
+#define KEY_CAMERA_FOCUS	0x210
+#define KEY_WPS_BUTTON		0x211	/* WiFi Protected Setup key */
+
+#define KEY_TOUCHPAD_TOGGLE	0x212	/* Request switch touchpad on or off */
+#define KEY_TOUCHPAD_ON		0x213
+#define KEY_TOUCHPAD_OFF	0x214
+
+#define KEY_CAMERA_ZOOMIN	0x215
+#define KEY_CAMERA_ZOOMOUT	0x216
+#define KEY_CAMERA_UP		0x217
+#define KEY_CAMERA_DOWN		0x218
+#define KEY_CAMERA_LEFT		0x219
+#define KEY_CAMERA_RIGHT	0x21a
+
+#define BTN_TRIGGER_HAPPY		0x2c0
+#define BTN_TRIGGER_HAPPY1		0x2c0
+#define BTN_TRIGGER_HAPPY2		0x2c1
+#define BTN_TRIGGER_HAPPY3		0x2c2
+#define BTN_TRIGGER_HAPPY4		0x2c3
+#define BTN_TRIGGER_HAPPY5		0x2c4
+#define BTN_TRIGGER_HAPPY6		0x2c5
+#define BTN_TRIGGER_HAPPY7		0x2c6
+#define BTN_TRIGGER_HAPPY8		0x2c7
+#define BTN_TRIGGER_HAPPY9		0x2c8
+#define BTN_TRIGGER_HAPPY10		0x2c9
+#define BTN_TRIGGER_HAPPY11		0x2ca
+#define BTN_TRIGGER_HAPPY12		0x2cb
+#define BTN_TRIGGER_HAPPY13		0x2cc
+#define BTN_TRIGGER_HAPPY14		0x2cd
+#define BTN_TRIGGER_HAPPY15		0x2ce
+#define BTN_TRIGGER_HAPPY16		0x2cf
+#define BTN_TRIGGER_HAPPY17		0x2d0
+#define BTN_TRIGGER_HAPPY18		0x2d1
+#define BTN_TRIGGER_HAPPY19		0x2d2
+#define BTN_TRIGGER_HAPPY20		0x2d3
+#define BTN_TRIGGER_HAPPY21		0x2d4
+#define BTN_TRIGGER_HAPPY22		0x2d5
+#define BTN_TRIGGER_HAPPY23		0x2d6
+#define BTN_TRIGGER_HAPPY24		0x2d7
+#define BTN_TRIGGER_HAPPY25		0x2d8
+#define BTN_TRIGGER_HAPPY26		0x2d9
+#define BTN_TRIGGER_HAPPY27		0x2da
+#define BTN_TRIGGER_HAPPY28		0x2db
+#define BTN_TRIGGER_HAPPY29		0x2dc
+#define BTN_TRIGGER_HAPPY30		0x2dd
+#define BTN_TRIGGER_HAPPY31		0x2de
+#define BTN_TRIGGER_HAPPY32		0x2df
+#define BTN_TRIGGER_HAPPY33		0x2e0
+#define BTN_TRIGGER_HAPPY34		0x2e1
+#define BTN_TRIGGER_HAPPY35		0x2e2
+#define BTN_TRIGGER_HAPPY36		0x2e3
+#define BTN_TRIGGER_HAPPY37		0x2e4
+#define BTN_TRIGGER_HAPPY38		0x2e5
+#define BTN_TRIGGER_HAPPY39		0x2e6
+#define BTN_TRIGGER_HAPPY40		0x2e7
+
+/* We avoid low common keys in module aliases so they don't get huge. */
+#define KEY_MIN_INTERESTING	KEY_MUTE
+#define KEY_MAX			0x2ff
+#define KEY_CNT			(KEY_MAX+1)
+
+/*
+ * Relative axes
+ */
+
+#define REL_X			0x00
+#define REL_Y			0x01
+#define REL_Z			0x02
+#define REL_RX			0x03
+#define REL_RY			0x04
+#define REL_RZ			0x05
+#define REL_HWHEEL		0x06
+#define REL_DIAL		0x07
+#define REL_WHEEL		0x08
+#define REL_MISC		0x09
+#define REL_MAX			0x0f
+#define REL_CNT			(REL_MAX+1)
+
+/*
+ * Absolute axes
+ */
+
+#define ABS_X			0x00
+#define ABS_Y			0x01
+#define ABS_Z			0x02
+#define ABS_RX			0x03
+#define ABS_RY			0x04
+#define ABS_RZ			0x05
+#define ABS_THROTTLE		0x06
+#define ABS_RUDDER		0x07
+#define ABS_WHEEL		0x08
+#define ABS_GAS			0x09
+#define ABS_BRAKE		0x0a
+#define ABS_HAT0X		0x10
+#define ABS_HAT0Y		0x11
+#define ABS_HAT1X		0x12
+#define ABS_HAT1Y		0x13
+#define ABS_HAT2X		0x14
+#define ABS_HAT2Y		0x15
+#define ABS_HAT3X		0x16
+#define ABS_HAT3Y		0x17
+#define ABS_PRESSURE		0x18
+#define ABS_DISTANCE		0x19
+#define ABS_TILT_X		0x1a
+#define ABS_TILT_Y		0x1b
+#define ABS_TOOL_WIDTH		0x1c
+
+#define ABS_VOLUME		0x20
+
+#define ABS_MISC		0x28
+
+#define ABS_MT_SLOT		0x2f	/* MT slot being modified */
+#define ABS_MT_TOUCH_MAJOR	0x30	/* Major axis of touching ellipse */
+#define ABS_MT_TOUCH_MINOR	0x31	/* Minor axis (omit if circular) */
+#define ABS_MT_WIDTH_MAJOR	0x32	/* Major axis of approaching ellipse */
+#define ABS_MT_WIDTH_MINOR	0x33	/* Minor axis (omit if circular) */
+#define ABS_MT_ORIENTATION	0x34	/* Ellipse orientation */
+#define ABS_MT_POSITION_X	0x35	/* Center X ellipse position */
+#define ABS_MT_POSITION_Y	0x36	/* Center Y ellipse position */
+#define ABS_MT_TOOL_TYPE	0x37	/* Type of touching device */
+#define ABS_MT_BLOB_ID		0x38	/* Group a set of packets as a blob */
+#define ABS_MT_TRACKING_ID	0x39	/* Unique ID of initiated contact */
+#define ABS_MT_PRESSURE		0x3a	/* Pressure on contact area */
+#define ABS_MT_DISTANCE		0x3b	/* Contact hover distance */
+
+#ifdef __KERNEL__
+/* Implementation details, userspace should not care about these */
+#define ABS_MT_FIRST		ABS_MT_TOUCH_MAJOR
+#define ABS_MT_LAST		ABS_MT_DISTANCE
+#endif
+
+#define ABS_MAX			0x3f
+#define ABS_CNT			(ABS_MAX+1)
+
+/*
+ * Switch events
+ */
+
+#define SW_LID			0x00  /* set = lid shut */
+#define SW_TABLET_MODE		0x01  /* set = tablet mode */
+#define SW_HEADPHONE_INSERT	0x02  /* set = inserted */
+#define SW_RFKILL_ALL		0x03  /* rfkill master switch, type "any"
+					 set = radio enabled */
+#define SW_RADIO		SW_RFKILL_ALL	/* deprecated */
+#define SW_MICROPHONE_INSERT	0x04  /* set = inserted */
+#define SW_DOCK			0x05  /* set = plugged into dock */
+#define SW_LINEOUT_INSERT	0x06  /* set = inserted */
+#define SW_JACK_PHYSICAL_INSERT 0x07  /* set = mechanical switch set */
+#define SW_VIDEOOUT_INSERT	0x08  /* set = inserted */
+#define SW_CAMERA_LENS_COVER	0x09  /* set = lens covered */
+#define SW_KEYPAD_SLIDE		0x0a  /* set = keypad slide out */
+#define SW_FRONT_PROXIMITY	0x0b  /* set = front proximity sensor active */
+#define SW_ROTATE_LOCK		0x0c  /* set = rotate locked/disabled */
+#define SW_LINEIN_INSERT	0x0d  /* set = inserted */
+#define SW_MAX			0x0f
+#define SW_CNT			(SW_MAX+1)
+
+/*
+ * Misc events
+ */
+
+#define MSC_SERIAL		0x00
+#define MSC_PULSELED		0x01
+#define MSC_GESTURE		0x02
+#define MSC_RAW			0x03
+#define MSC_SCAN		0x04
+#define MSC_MAX			0x07
+#define MSC_CNT			(MSC_MAX+1)
+
+/*
+ * LEDs
+ */
+
+#define LED_NUML		0x00
+#define LED_CAPSL		0x01
+#define LED_SCROLLL		0x02
+#define LED_COMPOSE		0x03
+#define LED_KANA		0x04
+#define LED_SLEEP		0x05
+#define LED_SUSPEND		0x06
+#define LED_MUTE		0x07
+#define LED_MISC		0x08
+#define LED_MAIL		0x09
+#define LED_CHARGING		0x0a
+#define LED_MAX			0x0f
+#define LED_CNT			(LED_MAX+1)
+
+/*
+ * Autorepeat values
+ */
+
+#define REP_DELAY		0x00
+#define REP_PERIOD		0x01
+#define REP_MAX			0x01
+#define REP_CNT			(REP_MAX+1)
+
+/*
+ * Sounds
+ */
+
+#define SND_CLICK		0x00
+#define SND_BELL		0x01
+#define SND_TONE		0x02
+#define SND_MAX			0x07
+#define SND_CNT			(SND_MAX+1)
+
+/*
+ * IDs.
+ */
+
+#define ID_BUS			0
+#define ID_VENDOR		1
+#define ID_PRODUCT		2
+#define ID_VERSION		3
+
+#define BUS_PCI			0x01
+#define BUS_ISAPNP		0x02
+#define BUS_USB			0x03
+#define BUS_HIL			0x04
+#define BUS_BLUETOOTH		0x05
+#define BUS_VIRTUAL		0x06
+
+#define BUS_ISA			0x10
+#define BUS_I8042		0x11
+#define BUS_XTKBD		0x12
+#define BUS_RS232		0x13
+#define BUS_GAMEPORT		0x14
+#define BUS_PARPORT		0x15
+#define BUS_AMIGA		0x16
+#define BUS_ADB			0x17
+#define BUS_I2C			0x18
+#define BUS_HOST		0x19
+#define BUS_GSC			0x1A
+#define BUS_ATARI		0x1B
+#define BUS_SPI			0x1C
+
+/*
+ * MT_TOOL types
+ */
+#define MT_TOOL_FINGER		0
+#define MT_TOOL_PEN		1
+#define MT_TOOL_MAX		1
+
+/*
+ * Values describing the status of a force-feedback effect
+ */
+#define FF_STATUS_STOPPED	0x00
+#define FF_STATUS_PLAYING	0x01
+#define FF_STATUS_MAX		0x01
+
+/*
+ * Structures used in ioctls to upload effects to a device
+ * They are pieces of a bigger structure (called ff_effect)
+ */
+
+/*
+ * All duration values are expressed in ms. Values above 32767 ms (0x7fff)
+ * should not be used and have unspecified results.
+ */
+
+/**
+ * struct ff_replay - defines scheduling of the force-feedback effect
+ * @length: duration of the effect
+ * @delay: delay before effect should start playing
+ */
+struct ff_replay {
+	__u16 length;
+	__u16 delay;
+};
+
+/**
+ * struct ff_trigger - defines what triggers the force-feedback effect
+ * @button: number of the button triggering the effect
+ * @interval: controls how soon the effect can be re-triggered
+ */
+struct ff_trigger {
+	__u16 button;
+	__u16 interval;
+};
+
+/**
+ * struct ff_envelope - generic force-feedback effect envelope
+ * @attack_length: duration of the attack (ms)
+ * @attack_level: level at the beginning of the attack
+ * @fade_length: duration of fade (ms)
+ * @fade_level: level at the end of fade
+ *
+ * The @attack_level and @fade_level are absolute values; when applying
+ * envelope force-feedback core will convert to positive/negative
+ * value based on polarity of the default level of the effect.
+ * Valid range for the attack and fade levels is 0x0000 - 0x7fff
+ */
+struct ff_envelope {
+	__u16 attack_length;
+	__u16 attack_level;
+	__u16 fade_length;
+	__u16 fade_level;
+};
+
+/**
+ * struct ff_constant_effect - defines parameters of a constant force-feedback effect
+ * @level: strength of the effect; may be negative
+ * @envelope: envelope data
+ */
+struct ff_constant_effect {
+	__s16 level;
+	struct ff_envelope envelope;
+};
+
+/**
+ * struct ff_ramp_effect - defines parameters of a ramp force-feedback effect
+ * @start_level: beginning strength of the effect; may be negative
+ * @end_level: final strength of the effect; may be negative
+ * @envelope: envelope data
+ */
+struct ff_ramp_effect {
+	__s16 start_level;
+	__s16 end_level;
+	struct ff_envelope envelope;
+};
+
+/**
+ * struct ff_condition_effect - defines a spring or friction force-feedback effect
+ * @right_saturation: maximum level when joystick moved all way to the right
+ * @left_saturation: same for the left side
+ * @right_coeff: controls how fast the force grows when the joystick moves
+ *	to the right
+ * @left_coeff: same for the left side
+ * @deadband: size of the dead zone, where no force is produced
+ * @center: position of the dead zone
+ */
+struct ff_condition_effect {
+	__u16 right_saturation;
+	__u16 left_saturation;
+
+	__s16 right_coeff;
+	__s16 left_coeff;
+
+	__u16 deadband;
+	__s16 center;
+};
+
+/**
+ * struct ff_periodic_effect - defines parameters of a periodic force-feedback effect
+ * @waveform: kind of the effect (wave)
+ * @period: period of the wave (ms)
+ * @magnitude: peak value
+ * @offset: mean value of the wave (roughly)
+ * @phase: 'horizontal' shift
+ * @envelope: envelope data
+ * @custom_len: number of samples (FF_CUSTOM only)
+ * @custom_data: buffer of samples (FF_CUSTOM only)
+ *
+ * Known waveforms - FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP,
+ * FF_SAW_DOWN, FF_CUSTOM. The exact syntax FF_CUSTOM is undefined
+ * for the time being as no driver supports it yet.
+ *
+ * Note: the data pointed by custom_data is copied by the driver.
+ * You can therefore dispose of the memory after the upload/update.
+ */
+struct ff_periodic_effect {
+	__u16 waveform;
+	__u16 period;
+	__s16 magnitude;
+	__s16 offset;
+	__u16 phase;
+
+	struct ff_envelope envelope;
+
+	__u32 custom_len;
+	__s16 __user *custom_data;
+};
+
+/**
+ * struct ff_rumble_effect - defines parameters of a periodic force-feedback effect
+ * @strong_magnitude: magnitude of the heavy motor
+ * @weak_magnitude: magnitude of the light one
+ *
+ * Some rumble pads have two motors of different weight. Strong_magnitude
+ * represents the magnitude of the vibration generated by the heavy one.
+ */
+struct ff_rumble_effect {
+	__u16 strong_magnitude;
+	__u16 weak_magnitude;
+};
+
+/**
+ * struct ff_effect - defines force feedback effect
+ * @type: type of the effect (FF_CONSTANT, FF_PERIODIC, FF_RAMP, FF_SPRING,
+ *	FF_FRICTION, FF_DAMPER, FF_RUMBLE, FF_INERTIA, or FF_CUSTOM)
+ * @id: an unique id assigned to an effect
+ * @direction: direction of the effect
+ * @trigger: trigger conditions (struct ff_trigger)
+ * @replay: scheduling of the effect (struct ff_replay)
+ * @u: effect-specific structure (one of ff_constant_effect, ff_ramp_effect,
+ *	ff_periodic_effect, ff_condition_effect, ff_rumble_effect) further
+ *	defining effect parameters
+ *
+ * This structure is sent through ioctl from the application to the driver.
+ * To create a new effect application should set its @id to -1; the kernel
+ * will return assigned @id which can later be used to update or delete
+ * this effect.
+ *
+ * Direction of the effect is encoded as follows:
+ *	0 deg -> 0x0000 (down)
+ *	90 deg -> 0x4000 (left)
+ *	180 deg -> 0x8000 (up)
+ *	270 deg -> 0xC000 (right)
+ */
+struct ff_effect {
+	__u16 type;
+	__s16 id;
+	__u16 direction;
+	struct ff_trigger trigger;
+	struct ff_replay replay;
+
+	union {
+		struct ff_constant_effect constant;
+		struct ff_ramp_effect ramp;
+		struct ff_periodic_effect periodic;
+		struct ff_condition_effect condition[2]; /* One for each axis */
+		struct ff_rumble_effect rumble;
+	} u;
+};
+
+/*
+ * Force feedback effect types
+ */
+
+#define FF_RUMBLE	0x50
+#define FF_PERIODIC	0x51
+#define FF_CONSTANT	0x52
+#define FF_SPRING	0x53
+#define FF_FRICTION	0x54
+#define FF_DAMPER	0x55
+#define FF_INERTIA	0x56
+#define FF_RAMP		0x57
+
+#define FF_EFFECT_MIN	FF_RUMBLE
+#define FF_EFFECT_MAX	FF_RAMP
+
+/*
+ * Force feedback periodic effect types
+ */
+
+#define FF_SQUARE	0x58
+#define FF_TRIANGLE	0x59
+#define FF_SINE		0x5a
+#define FF_SAW_UP	0x5b
+#define FF_SAW_DOWN	0x5c
+#define FF_CUSTOM	0x5d
+
+#define FF_WAVEFORM_MIN	FF_SQUARE
+#define FF_WAVEFORM_MAX	FF_CUSTOM
+
+/*
+ * Set ff device properties
+ */
+
+#define FF_GAIN		0x60
+#define FF_AUTOCENTER	0x61
+
+#define FF_MAX		0x7f
+#define FF_CNT		(FF_MAX+1)
+
+#ifdef __KERNEL__
+
+/*
+ * In-kernel definitions.
+ */
+
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/timer.h>
+#include <linux/mod_devicetable.h>
+
+/**
+ * struct input_dev - represents an input device
+ * @name: name of the device
+ * @phys: physical path to the device in the system hierarchy
+ * @uniq: unique identification code for the device (if device has it)
+ * @id: id of the device (struct input_id)
+ * @propbit: bitmap of device properties and quirks
+ * @evbit: bitmap of types of events supported by the device (EV_KEY,
+ *	EV_REL, etc.)
+ * @keybit: bitmap of keys/buttons this device has
+ * @relbit: bitmap of relative axes for the device
+ * @absbit: bitmap of absolute axes for the device
+ * @mscbit: bitmap of miscellaneous events supported by the device
+ * @ledbit: bitmap of leds present on the device
+ * @sndbit: bitmap of sound effects supported by the device
+ * @ffbit: bitmap of force feedback effects supported by the device
+ * @swbit: bitmap of switches present on the device
+ * @hint_events_per_packet: average number of events generated by the
+ *	device in a packet (between EV_SYN/SYN_REPORT events). Used by
+ *	event handlers to estimate size of the buffer needed to hold
+ *	events.
+ * @keycodemax: size of keycode table
+ * @keycodesize: size of elements in keycode table
+ * @keycode: map of scancodes to keycodes for this device
+ * @getkeycode: optional legacy method to retrieve current keymap.
+ * @setkeycode: optional method to alter current keymap, used to implement
+ *	sparse keymaps. If not supplied default mechanism will be used.
+ *	The method is being called while holding event_lock and thus must
+ *	not sleep
+ * @ff: force feedback structure associated with the device if device
+ *	supports force feedback effects
+ * @repeat_key: stores key code of the last key pressed; used to implement
+ *	software autorepeat
+ * @timer: timer for software autorepeat
+ * @rep: current values for autorepeat parameters (delay, rate)
+ * @mt: pointer to array of struct input_mt_slot holding current values
+ *	of tracked contacts
+ * @mtsize: number of MT slots the device uses
+ * @slot: MT slot currently being transmitted
+ * @trkid: stores MT tracking ID for the current contact
+ * @absinfo: array of &struct input_absinfo elements holding information
+ *	about absolute axes (current value, min, max, flat, fuzz,
+ *	resolution)
+ * @key: reflects current state of device's keys/buttons
+ * @led: reflects current state of device's LEDs
+ * @snd: reflects current state of sound effects
+ * @sw: reflects current state of device's switches
+ * @open: this method is called when the very first user calls
+ *	input_open_device(). The driver must prepare the device
+ *	to start generating events (start polling thread,
+ *	request an IRQ, submit URB, etc.)
+ * @close: this method is called when the very last user calls
+ *	input_close_device().
+ * @flush: purges the device. Most commonly used to get rid of force
+ *	feedback effects loaded into the device when disconnecting
+ *	from it
+ * @event: event handler for events sent _to_ the device, like EV_LED
+ *	or EV_SND. The device is expected to carry out the requested
+ *	action (turn on a LED, play sound, etc.) The call is protected
+ *	by @event_lock and must not sleep
+ * @grab: input handle that currently has the device grabbed (via
+ *	EVIOCGRAB ioctl). When a handle grabs a device it becomes sole
+ *	recipient for all input events coming from the device
+ * @event_lock: this spinlock is is taken when input core receives
+ *	and processes a new event for the device (in input_event()).
+ *	Code that accesses and/or modifies parameters of a device
+ *	(such as keymap or absmin, absmax, absfuzz, etc.) after device
+ *	has been registered with input core must take this lock.
+ * @mutex: serializes calls to open(), close() and flush() methods
+ * @users: stores number of users (input handlers) that opened this
+ *	device. It is used by input_open_device() and input_close_device()
+ *	to make sure that dev->open() is only called when the first
+ *	user opens device and dev->close() is called when the very
+ *	last user closes the device
+ * @going_away: marks devices that are in a middle of unregistering and
+ *	causes input_open_device*() fail with -ENODEV.
+ * @sync: set to %true when there were no new events since last EV_SYN
+ * @dev: driver model's view of this device
+ * @h_list: list of input handles associated with the device. When
+ *	accessing the list dev->mutex must be held
+ * @node: used to place the device onto input_dev_list
+ */
+struct input_dev {
+	const char *name;
+	const char *phys;
+	const char *uniq;
+	struct input_id id;
+
+	unsigned long propbit[BITS_TO_LONGS(INPUT_PROP_CNT)];
+
+	unsigned long evbit[BITS_TO_LONGS(EV_CNT)];
+	unsigned long keybit[BITS_TO_LONGS(KEY_CNT)];
+	unsigned long relbit[BITS_TO_LONGS(REL_CNT)];
+	unsigned long absbit[BITS_TO_LONGS(ABS_CNT)];
+	unsigned long mscbit[BITS_TO_LONGS(MSC_CNT)];
+	unsigned long ledbit[BITS_TO_LONGS(LED_CNT)];
+	unsigned long sndbit[BITS_TO_LONGS(SND_CNT)];
+	unsigned long ffbit[BITS_TO_LONGS(FF_CNT)];
+	unsigned long swbit[BITS_TO_LONGS(SW_CNT)];
+
+	unsigned int hint_events_per_packet;
+
+	unsigned int keycodemax;
+	unsigned int keycodesize;
+	void *keycode;
+
+	int (*setkeycode)(struct input_dev *dev,
+			  const struct input_keymap_entry *ke,
+			  unsigned int *old_keycode);
+	int (*getkeycode)(struct input_dev *dev,
+			  struct input_keymap_entry *ke);
+
+	struct ff_device *ff;
+
+	unsigned int repeat_key;
+	struct timer_list timer;
+
+	int rep[REP_CNT];
+
+	struct input_mt_slot *mt;
+	int mtsize;
+	int slot;
+	int trkid;
+
+	struct input_absinfo *absinfo;
+
+	unsigned long key[BITS_TO_LONGS(KEY_CNT)];
+	unsigned long led[BITS_TO_LONGS(LED_CNT)];
+	unsigned long snd[BITS_TO_LONGS(SND_CNT)];
+	unsigned long sw[BITS_TO_LONGS(SW_CNT)];
+
+	int (*open)(struct input_dev *dev);
+	void (*close)(struct input_dev *dev);
+	int (*flush)(struct input_dev *dev, struct file *file);
+	int (*event)(struct input_dev *dev, unsigned int type, unsigned int code, int value);
+
+	struct input_handle __rcu *grab;
+
+	spinlock_t event_lock;
+	struct mutex mutex;
+
+	unsigned int users;
+	bool going_away;
+
+	bool sync;
+
+	struct device dev;
+
+	struct list_head	h_list;
+	struct list_head	node;
+};
+#define to_input_dev(d) container_of(d, struct input_dev, dev)
+
+/*
+ * Verify that we are in sync with input_device_id mod_devicetable.h #defines
+ */
+
+#if EV_MAX != INPUT_DEVICE_ID_EV_MAX
+#error "EV_MAX and INPUT_DEVICE_ID_EV_MAX do not match"
+#endif
+
+#if KEY_MIN_INTERESTING != INPUT_DEVICE_ID_KEY_MIN_INTERESTING
+#error "KEY_MIN_INTERESTING and INPUT_DEVICE_ID_KEY_MIN_INTERESTING do not match"
+#endif
+
+#if KEY_MAX != INPUT_DEVICE_ID_KEY_MAX
+#error "KEY_MAX and INPUT_DEVICE_ID_KEY_MAX do not match"
+#endif
+
+#if REL_MAX != INPUT_DEVICE_ID_REL_MAX
+#error "REL_MAX and INPUT_DEVICE_ID_REL_MAX do not match"
+#endif
+
+#if ABS_MAX != INPUT_DEVICE_ID_ABS_MAX
+#error "ABS_MAX and INPUT_DEVICE_ID_ABS_MAX do not match"
+#endif
+
+#if MSC_MAX != INPUT_DEVICE_ID_MSC_MAX
+#error "MSC_MAX and INPUT_DEVICE_ID_MSC_MAX do not match"
+#endif
+
+#if LED_MAX != INPUT_DEVICE_ID_LED_MAX
+#error "LED_MAX and INPUT_DEVICE_ID_LED_MAX do not match"
+#endif
+
+#if SND_MAX != INPUT_DEVICE_ID_SND_MAX
+#error "SND_MAX and INPUT_DEVICE_ID_SND_MAX do not match"
+#endif
+
+#if FF_MAX != INPUT_DEVICE_ID_FF_MAX
+#error "FF_MAX and INPUT_DEVICE_ID_FF_MAX do not match"
+#endif
+
+#if SW_MAX != INPUT_DEVICE_ID_SW_MAX
+#error "SW_MAX and INPUT_DEVICE_ID_SW_MAX do not match"
+#endif
+
+#define INPUT_DEVICE_ID_MATCH_DEVICE \
+	(INPUT_DEVICE_ID_MATCH_BUS | INPUT_DEVICE_ID_MATCH_VENDOR | INPUT_DEVICE_ID_MATCH_PRODUCT)
+#define INPUT_DEVICE_ID_MATCH_DEVICE_AND_VERSION \
+	(INPUT_DEVICE_ID_MATCH_DEVICE | INPUT_DEVICE_ID_MATCH_VERSION)
+
+struct input_handle;
+
+/**
+ * struct input_handler - implements one of interfaces for input devices
+ * @private: driver-specific data
+ * @event: event handler. This method is being called by input core with
+ *	interrupts disabled and dev->event_lock spinlock held and so
+ *	it may not sleep
+ * @filter: similar to @event; separates normal event handlers from
+ *	"filters".
+ * @match: called after comparing device's id with handler's id_table
+ *	to perform fine-grained matching between device and handler
+ * @connect: called when attaching a handler to an input device
+ * @disconnect: disconnects a handler from input device
+ * @start: starts handler for given handle. This function is called by
+ *	input core right after connect() method and also when a process
+ *	that "grabbed" a device releases it
+ * @fops: file operations this driver implements
+ * @minor: beginning of range of 32 minors for devices this driver
+ *	can provide
+ * @name: name of the handler, to be shown in /proc/bus/input/handlers
+ * @id_table: pointer to a table of input_device_ids this driver can
+ *	handle
+ * @h_list: list of input handles associated with the handler
+ * @node: for placing the driver onto input_handler_list
+ *
+ * Input handlers attach to input devices and create input handles. There
+ * are likely several handlers attached to any given input device at the
+ * same time. All of them will get their copy of input event generated by
+ * the device.
+ *
+ * The very same structure is used to implement input filters. Input core
+ * allows filters to run first and will not pass event to regular handlers
+ * if any of the filters indicate that the event should be filtered (by
+ * returning %true from their filter() method).
+ *
+ * Note that input core serializes calls to connect() and disconnect()
+ * methods.
+ */
+struct input_handler {
+
+	void *private;
+
+	void (*event)(struct input_handle *handle, unsigned int type, unsigned int code, int value);
+	bool (*filter)(struct input_handle *handle, unsigned int type, unsigned int code, int value);
+	bool (*match)(struct input_handler *handler, struct input_dev *dev);
+	int (*connect)(struct input_handler *handler, struct input_dev *dev, const struct input_device_id *id);
+	void (*disconnect)(struct input_handle *handle);
+	void (*start)(struct input_handle *handle);
+
+	const struct file_operations *fops;
+	int minor;
+	const char *name;
+
+	const struct input_device_id *id_table;
+
+	struct list_head	h_list;
+	struct list_head	node;
+};
+
+/**
+ * struct input_handle - links input device with an input handler
+ * @private: handler-specific data
+ * @open: counter showing whether the handle is 'open', i.e. should deliver
+ *	events from its device
+ * @name: name given to the handle by handler that created it
+ * @dev: input device the handle is attached to
+ * @handler: handler that works with the device through this handle
+ * @d_node: used to put the handle on device's list of attached handles
+ * @h_node: used to put the handle on handler's list of handles from which
+ *	it gets events
+ */
+struct input_handle {
+
+	void *private;
+
+	int open;
+	const char *name;
+
+	struct input_dev *dev;
+	struct input_handler *handler;
+
+	struct list_head	d_node;
+	struct list_head	h_node;
+};
+
+struct input_dev *input_allocate_device(void);
+void input_free_device(struct input_dev *dev);
+
+static inline struct input_dev *input_get_device(struct input_dev *dev)
+{
+	return dev ? to_input_dev(get_device(&dev->dev)) : NULL;
+}
+
+static inline void input_put_device(struct input_dev *dev)
+{
+	if (dev)
+		put_device(&dev->dev);
+}
+
+static inline void *input_get_drvdata(struct input_dev *dev)
+{
+	return dev_get_drvdata(&dev->dev);
+}
+
+static inline void input_set_drvdata(struct input_dev *dev, void *data)
+{
+	dev_set_drvdata(&dev->dev, data);
+}
+
+int __must_check input_register_device(struct input_dev *);
+void input_unregister_device(struct input_dev *);
+
+void input_reset_device(struct input_dev *);
+
+int __must_check input_register_handler(struct input_handler *);
+void input_unregister_handler(struct input_handler *);
+
+int input_handler_for_each_handle(struct input_handler *, void *data,
+				  int (*fn)(struct input_handle *, void *));
+
+int input_register_handle(struct input_handle *);
+void input_unregister_handle(struct input_handle *);
+
+int input_grab_device(struct input_handle *);
+void input_release_device(struct input_handle *);
+
+int input_open_device(struct input_handle *);
+void input_close_device(struct input_handle *);
+
+int input_flush_device(struct input_handle *handle, struct file *file);
+
+void input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value);
+void input_inject_event(struct input_handle *handle, unsigned int type, unsigned int code, int value);
+
+static inline void input_report_key(struct input_dev *dev, unsigned int code, int value)
+{
+	input_event(dev, EV_KEY, code, !!value);
+}
+
+static inline void input_report_rel(struct input_dev *dev, unsigned int code, int value)
+{
+	input_event(dev, EV_REL, code, value);
+}
+
+static inline void input_report_abs(struct input_dev *dev, unsigned int code, int value)
+{
+	input_event(dev, EV_ABS, code, value);
+}
+
+static inline void input_report_ff_status(struct input_dev *dev, unsigned int code, int value)
+{
+	input_event(dev, EV_FF_STATUS, code, value);
+}
+
+static inline void input_report_switch(struct input_dev *dev, unsigned int code, int value)
+{
+	input_event(dev, EV_SW, code, !!value);
+}
+
+static inline void input_sync(struct input_dev *dev)
+{
+	input_event(dev, EV_SYN, SYN_REPORT, 0);
+}
+
+static inline void input_mt_sync(struct input_dev *dev)
+{
+	input_event(dev, EV_SYN, SYN_MT_REPORT, 0);
+}
+
+void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int code);
+
+/**
+ * input_set_events_per_packet - tell handlers about the driver event rate
+ * @dev: the input device used by the driver
+ * @n_events: the average number of events between calls to input_sync()
+ *
+ * If the event rate sent from a device is unusually large, use this
+ * function to set the expected event rate. This will allow handlers
+ * to set up an appropriate buffer size for the event stream, in order
+ * to minimize information loss.
+ */
+static inline void input_set_events_per_packet(struct input_dev *dev, int n_events)
+{
+	dev->hint_events_per_packet = n_events;
+}
+
+void input_alloc_absinfo(struct input_dev *dev);
+void input_set_abs_params(struct input_dev *dev, unsigned int axis,
+			  int min, int max, int fuzz, int flat);
+
+#define INPUT_GENERATE_ABS_ACCESSORS(_suffix, _item)			\
+static inline int input_abs_get_##_suffix(struct input_dev *dev,	\
+					  unsigned int axis)		\
+{									\
+	return dev->absinfo ? dev->absinfo[axis]._item : 0;		\
+}									\
+									\
+static inline void input_abs_set_##_suffix(struct input_dev *dev,	\
+					   unsigned int axis, int val)	\
+{									\
+	input_alloc_absinfo(dev);					\
+	if (dev->absinfo)						\
+		dev->absinfo[axis]._item = val;				\
+}
+
+INPUT_GENERATE_ABS_ACCESSORS(val, value)
+INPUT_GENERATE_ABS_ACCESSORS(min, minimum)
+INPUT_GENERATE_ABS_ACCESSORS(max, maximum)
+INPUT_GENERATE_ABS_ACCESSORS(fuzz, fuzz)
+INPUT_GENERATE_ABS_ACCESSORS(flat, flat)
+INPUT_GENERATE_ABS_ACCESSORS(res, resolution)
+
+int input_scancode_to_scalar(const struct input_keymap_entry *ke,
+			     unsigned int *scancode);
+
+int input_get_keycode(struct input_dev *dev, struct input_keymap_entry *ke);
+int input_set_keycode(struct input_dev *dev,
+		      const struct input_keymap_entry *ke);
+
+extern struct class input_class;
+
+/**
+ * struct ff_device - force-feedback part of an input device
+ * @upload: Called to upload an new effect into device
+ * @erase: Called to erase an effect from device
+ * @playback: Called to request device to start playing specified effect
+ * @set_gain: Called to set specified gain
+ * @set_autocenter: Called to auto-center device
+ * @destroy: called by input core when parent input device is being
+ *	destroyed
+ * @private: driver-specific data, will be freed automatically
+ * @ffbit: bitmap of force feedback capabilities truly supported by
+ *	device (not emulated like ones in input_dev->ffbit)
+ * @mutex: mutex for serializing access to the device
+ * @max_effects: maximum number of effects supported by device
+ * @effects: pointer to an array of effects currently loaded into device
+ * @effect_owners: array of effect owners; when file handle owning
+ *	an effect gets closed the effect is automatically erased
+ *
+ * Every force-feedback device must implement upload() and playback()
+ * methods; erase() is optional. set_gain() and set_autocenter() need
+ * only be implemented if driver sets up FF_GAIN and FF_AUTOCENTER
+ * bits.
+ *
+ * Note that playback(), set_gain() and set_autocenter() are called with
+ * dev->event_lock spinlock held and interrupts off and thus may not
+ * sleep.
+ */
+struct ff_device {
+	int (*upload)(struct input_dev *dev, struct ff_effect *effect,
+		      struct ff_effect *old);
+	int (*erase)(struct input_dev *dev, int effect_id);
+
+	int (*playback)(struct input_dev *dev, int effect_id, int value);
+	void (*set_gain)(struct input_dev *dev, u16 gain);
+	void (*set_autocenter)(struct input_dev *dev, u16 magnitude);
+
+	void (*destroy)(struct ff_device *);
+
+	void *private;
+
+	unsigned long ffbit[BITS_TO_LONGS(FF_CNT)];
+
+	struct mutex mutex;
+
+	int max_effects;
+	struct ff_effect *effects;
+	struct file *effect_owners[];
+};
+
+int input_ff_create(struct input_dev *dev, unsigned int max_effects);
+void input_ff_destroy(struct input_dev *dev);
+
+int input_ff_event(struct input_dev *dev, unsigned int type, unsigned int code, int value);
+
+int input_ff_upload(struct input_dev *dev, struct ff_effect *effect, struct file *file);
+int input_ff_erase(struct input_dev *dev, int effect_id, struct file *file);
+
+int input_ff_create_memless(struct input_dev *dev, void *data,
+		int (*play_effect)(struct input_dev *, void *, struct ff_effect *));
+
+#endif
+#endif
diff --git a/include/linux/input/ad714x.h b/include/linux/input/ad714x.h
new file mode 100644
index 00000000..d388d857
--- /dev/null
+++ b/include/linux/input/ad714x.h
@@ -0,0 +1,64 @@
+/*
+ * include/linux/input/ad714x.h
+ *
+ * AD714x is very flexible, it can be used as buttons, scrollwheel,
+ * slider, touchpad at the same time. That depends on the boards.
+ * The platform_data for the device's "struct device" holds this
+ * information.
+ *
+ * Copyright 2009-2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __LINUX_INPUT_AD714X_H__
+#define __LINUX_INPUT_AD714X_H__
+
+#define STAGE_NUM              12
+#define STAGE_CFGREG_NUM       8
+#define SYS_CFGREG_NUM         8
+
+/* board information which need be initialized in arch/mach... */
+struct ad714x_slider_plat {
+	int start_stage;
+	int end_stage;
+	int max_coord;
+};
+
+struct ad714x_wheel_plat {
+	int start_stage;
+	int end_stage;
+	int max_coord;
+};
+
+struct ad714x_touchpad_plat {
+	int x_start_stage;
+	int x_end_stage;
+	int x_max_coord;
+
+	int y_start_stage;
+	int y_end_stage;
+	int y_max_coord;
+};
+
+struct ad714x_button_plat {
+	int keycode;
+	unsigned short l_mask;
+	unsigned short h_mask;
+};
+
+struct ad714x_platform_data {
+	int slider_num;
+	int wheel_num;
+	int touchpad_num;
+	int button_num;
+	struct ad714x_slider_plat *slider;
+	struct ad714x_wheel_plat *wheel;
+	struct ad714x_touchpad_plat *touchpad;
+	struct ad714x_button_plat *button;
+	unsigned short stage_cfg_reg[STAGE_NUM][STAGE_CFGREG_NUM];
+	unsigned short sys_cfg_reg[SYS_CFGREG_NUM];
+	unsigned long irqflags;
+};
+
+#endif
diff --git a/include/linux/input/adp5589.h b/include/linux/input/adp5589.h
new file mode 100644
index 00000000..1a05eee1
--- /dev/null
+++ b/include/linux/input/adp5589.h
@@ -0,0 +1,188 @@
+/*
+ * Analog Devices ADP5589/ADP5585 I/O Expander and QWERTY Keypad Controller
+ *
+ * Copyright 2010-2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef _ADP5589_H
+#define _ADP5589_H
+
+/*
+ * ADP5589 specific GPI and Keymap defines
+ */
+
+#define ADP5589_KEYMAPSIZE	88
+
+#define ADP5589_GPI_PIN_ROW0 97
+#define ADP5589_GPI_PIN_ROW1 98
+#define ADP5589_GPI_PIN_ROW2 99
+#define ADP5589_GPI_PIN_ROW3 100
+#define ADP5589_GPI_PIN_ROW4 101
+#define ADP5589_GPI_PIN_ROW5 102
+#define ADP5589_GPI_PIN_ROW6 103
+#define ADP5589_GPI_PIN_ROW7 104
+#define ADP5589_GPI_PIN_COL0 105
+#define ADP5589_GPI_PIN_COL1 106
+#define ADP5589_GPI_PIN_COL2 107
+#define ADP5589_GPI_PIN_COL3 108
+#define ADP5589_GPI_PIN_COL4 109
+#define ADP5589_GPI_PIN_COL5 110
+#define ADP5589_GPI_PIN_COL6 111
+#define ADP5589_GPI_PIN_COL7 112
+#define ADP5589_GPI_PIN_COL8 113
+#define ADP5589_GPI_PIN_COL9 114
+#define ADP5589_GPI_PIN_COL10 115
+#define GPI_LOGIC1 116
+#define GPI_LOGIC2 117
+
+#define ADP5589_GPI_PIN_ROW_BASE ADP5589_GPI_PIN_ROW0
+#define ADP5589_GPI_PIN_ROW_END ADP5589_GPI_PIN_ROW7
+#define ADP5589_GPI_PIN_COL_BASE ADP5589_GPI_PIN_COL0
+#define ADP5589_GPI_PIN_COL_END ADP5589_GPI_PIN_COL10
+
+#define ADP5589_GPI_PIN_BASE ADP5589_GPI_PIN_ROW_BASE
+#define ADP5589_GPI_PIN_END ADP5589_GPI_PIN_COL_END
+
+#define ADP5589_GPIMAPSIZE_MAX (ADP5589_GPI_PIN_END - ADP5589_GPI_PIN_BASE + 1)
+
+/*
+ * ADP5585 specific GPI and Keymap defines
+ */
+
+#define ADP5585_KEYMAPSIZE	30
+
+#define ADP5585_GPI_PIN_ROW0 37
+#define ADP5585_GPI_PIN_ROW1 38
+#define ADP5585_GPI_PIN_ROW2 39
+#define ADP5585_GPI_PIN_ROW3 40
+#define ADP5585_GPI_PIN_ROW4 41
+#define ADP5585_GPI_PIN_ROW5 42
+#define ADP5585_GPI_PIN_COL0 43
+#define ADP5585_GPI_PIN_COL1 44
+#define ADP5585_GPI_PIN_COL2 45
+#define ADP5585_GPI_PIN_COL3 46
+#define ADP5585_GPI_PIN_COL4 47
+#define GPI_LOGIC 48
+
+#define ADP5585_GPI_PIN_ROW_BASE ADP5585_GPI_PIN_ROW0
+#define ADP5585_GPI_PIN_ROW_END ADP5585_GPI_PIN_ROW5
+#define ADP5585_GPI_PIN_COL_BASE ADP5585_GPI_PIN_COL0
+#define ADP5585_GPI_PIN_COL_END ADP5585_GPI_PIN_COL4
+
+#define ADP5585_GPI_PIN_BASE ADP5585_GPI_PIN_ROW_BASE
+#define ADP5585_GPI_PIN_END ADP5585_GPI_PIN_COL_END
+
+#define ADP5585_GPIMAPSIZE_MAX (ADP5585_GPI_PIN_END - ADP5585_GPI_PIN_BASE + 1)
+
+struct adp5589_gpi_map {
+	unsigned short pin;
+	unsigned short sw_evt;
+};
+
+/* scan_cycle_time */
+#define ADP5589_SCAN_CYCLE_10ms		0
+#define ADP5589_SCAN_CYCLE_20ms		1
+#define ADP5589_SCAN_CYCLE_30ms		2
+#define ADP5589_SCAN_CYCLE_40ms		3
+
+/* RESET_CFG */
+#define RESET_PULSE_WIDTH_500us		0
+#define RESET_PULSE_WIDTH_1ms		1
+#define RESET_PULSE_WIDTH_2ms		2
+#define RESET_PULSE_WIDTH_10ms		3
+
+#define RESET_TRIG_TIME_0ms		(0 << 2)
+#define RESET_TRIG_TIME_1000ms		(1 << 2)
+#define RESET_TRIG_TIME_1500ms		(2 << 2)
+#define RESET_TRIG_TIME_2000ms		(3 << 2)
+#define RESET_TRIG_TIME_2500ms		(4 << 2)
+#define RESET_TRIG_TIME_3000ms		(5 << 2)
+#define RESET_TRIG_TIME_3500ms		(6 << 2)
+#define RESET_TRIG_TIME_4000ms		(7 << 2)
+
+#define RESET_PASSTHRU_EN		(1 << 5)
+#define RESET1_POL_HIGH			(1 << 6)
+#define RESET1_POL_LOW			(0 << 6)
+#define RESET2_POL_HIGH			(1 << 7)
+#define RESET2_POL_LOW			(0 << 7)
+
+/* ADP5589 Mask Bits:
+ * C C C C C C C C C C C | R R R R R R R R
+ * 1 9 8 7 6 5 4 3 2 1 0 | 7 6 5 4 3 2 1 0
+ * 0
+ * ---------------- BIT ------------------
+ * 1 1 1 1 1 1 1 1 1 0 0 | 0 0 0 0 0 0 0 0
+ * 8 7 6 5 4 3 2 1 0 9 8 | 7 6 5 4 3 2 1 0
+ */
+
+#define ADP_ROW(x)	(1 << (x))
+#define ADP_COL(x)	(1 << (x + 8))
+#define ADP5589_ROW_MASK		0xFF
+#define ADP5589_COL_MASK		0xFF
+#define ADP5589_COL_SHIFT		8
+#define ADP5589_MAX_ROW_NUM		7
+#define ADP5589_MAX_COL_NUM		10
+
+/* ADP5585 Mask Bits:
+ * C C C C C | R R R R R R
+ * 4 3 2 1 0 | 5 4 3 2 1 0
+ *
+ * ---- BIT -- -----------
+ * 1 0 0 0 0 | 0 0 0 0 0 0
+ * 0 9 8 7 6 | 5 4 3 2 1 0
+ */
+
+#define ADP5585_ROW_MASK		0x3F
+#define ADP5585_COL_MASK		0x1F
+#define ADP5585_ROW_SHIFT		0
+#define ADP5585_COL_SHIFT		6
+#define ADP5585_MAX_ROW_NUM		5
+#define ADP5585_MAX_COL_NUM		4
+
+#define ADP5585_ROW(x)	(1 << ((x) & ADP5585_ROW_MASK))
+#define ADP5585_COL(x)	(1 << (((x) & ADP5585_COL_MASK) + ADP5585_COL_SHIFT))
+
+/* Put one of these structures in i2c_board_info platform_data */
+
+struct adp5589_kpad_platform_data {
+	unsigned keypad_en_mask;	/* Keypad (Rows/Columns) enable mask */
+	const unsigned short *keymap;	/* Pointer to keymap */
+	unsigned short keymapsize;	/* Keymap size */
+	bool repeat;			/* Enable key repeat */
+	bool en_keylock;		/* Enable key lock feature (ADP5589 only)*/
+	unsigned char unlock_key1;	/* Unlock Key 1 (ADP5589 only) */
+	unsigned char unlock_key2;	/* Unlock Key 2 (ADP5589 only) */
+	unsigned char unlock_timer;	/* Time in seconds [0..7] between the two unlock keys 0=disable (ADP5589 only) */
+	unsigned char scan_cycle_time;	/* Time between consecutive scan cycles */
+	unsigned char reset_cfg;	/* Reset config */
+	unsigned short reset1_key_1;	/* Reset Key 1 */
+	unsigned short reset1_key_2;	/* Reset Key 2 */
+	unsigned short reset1_key_3;	/* Reset Key 3 */
+	unsigned short reset2_key_1;	/* Reset Key 1 */
+	unsigned short reset2_key_2;	/* Reset Key 2 */
+	unsigned debounce_dis_mask;	/* Disable debounce mask */
+	unsigned pull_dis_mask;		/* Disable all pull resistors mask */
+	unsigned pullup_en_100k;	/* Pull-Up 100k Enable Mask */
+	unsigned pullup_en_300k;	/* Pull-Up 300k Enable Mask */
+	unsigned pulldown_en_300k;	/* Pull-Down 300k Enable Mask */
+	const struct adp5589_gpi_map *gpimap;
+	unsigned short gpimapsize;
+	const struct adp5589_gpio_platform_data *gpio_data;
+};
+
+struct i2c_client; /* forward declaration */
+
+struct adp5589_gpio_platform_data {
+	int	gpio_start;	/* GPIO Chip base # */
+	int	(*setup)(struct i2c_client *client,
+				int gpio, unsigned ngpio,
+				void *context);
+	int	(*teardown)(struct i2c_client *client,
+				int gpio, unsigned ngpio,
+				void *context);
+	void	*context;
+};
+
+#endif
diff --git a/include/linux/input/adxl34x.h b/include/linux/input/adxl34x.h
new file mode 100644
index 00000000..57e01a7c
--- /dev/null
+++ b/include/linux/input/adxl34x.h
@@ -0,0 +1,356 @@
+/*
+ * include/linux/input/adxl34x.h
+ *
+ * Digital Accelerometer characteristics are highly application specific
+ * and may vary between boards and models. The platform_data for the
+ * device's "struct device" holds this information.
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __LINUX_INPUT_ADXL34X_H__
+#define __LINUX_INPUT_ADXL34X_H__
+
+struct adxl34x_platform_data {
+
+	/*
+	 * X,Y,Z Axis Offset:
+	 * offer user offset adjustments in twoscompliment
+	 * form with a scale factor of 15.6 mg/LSB (i.e. 0x7F = +2 g)
+	 */
+
+	s8 x_axis_offset;
+	s8 y_axis_offset;
+	s8 z_axis_offset;
+
+	/*
+	 * TAP_X/Y/Z Enable: Setting TAP_X, Y, or Z Enable enables X,
+	 * Y, or Z participation in Tap detection. A '0' excludes the
+	 * selected axis from participation in Tap detection.
+	 * Setting the SUPPRESS bit suppresses Double Tap detection if
+	 * acceleration greater than tap_threshold is present during the
+	 * tap_latency period, i.e. after the first tap but before the
+	 * opening of the second tap window.
+	 */
+
+#define ADXL_SUPPRESS	(1 << 3)
+#define ADXL_TAP_X_EN	(1 << 2)
+#define ADXL_TAP_Y_EN	(1 << 1)
+#define ADXL_TAP_Z_EN	(1 << 0)
+
+	u8 tap_axis_control;
+
+	/*
+	 * tap_threshold:
+	 * holds the threshold value for tap detection/interrupts.
+	 * The data format is unsigned. The scale factor is 62.5 mg/LSB
+	 * (i.e. 0xFF = +16 g). A zero value may result in undesirable
+	 * behavior if Tap/Double Tap is enabled.
+	 */
+
+	u8 tap_threshold;
+
+	/*
+	 * tap_duration:
+	 * is an unsigned time value representing the maximum
+	 * time that an event must be above the tap_threshold threshold
+	 * to qualify as a tap event. The scale factor is 625 us/LSB. A zero
+	 * value will prevent Tap/Double Tap functions from working.
+	 */
+
+	u8 tap_duration;
+
+	/*
+	 * tap_latency:
+	 * is an unsigned time value representing the wait time
+	 * from the detection of a tap event to the opening of the time
+	 * window tap_window for a possible second tap event. The scale
+	 * factor is 1.25 ms/LSB. A zero value will disable the Double Tap
+	 * function.
+	 */
+
+	u8 tap_latency;
+
+	/*
+	 * tap_window:
+	 * is an unsigned time value representing the amount
+	 * of time after the expiration of tap_latency during which a second
+	 * tap can begin. The scale factor is 1.25 ms/LSB. A zero value will
+	 * disable the Double Tap function.
+	 */
+
+	u8 tap_window;
+
+	/*
+	 * act_axis_control:
+	 * X/Y/Z Enable: A '1' enables X, Y, or Z participation in activity
+	 * or inactivity detection. A '0' excludes the selected axis from
+	 * participation. If all of the axes are excluded, the function is
+	 * disabled.
+	 * AC/DC: A '0' = DC coupled operation and a '1' = AC coupled
+	 * operation. In DC coupled operation, the current acceleration is
+	 * compared with activity_threshold and inactivity_threshold directly
+	 * to determine whether activity or inactivity is detected. In AC
+	 * coupled operation for activity detection, the acceleration value
+	 * at the start of activity detection is taken as a reference value.
+	 * New samples of acceleration are then compared to this
+	 * reference value and if the magnitude of the difference exceeds
+	 * activity_threshold the device will trigger an activity interrupt. In
+	 * AC coupled operation for inactivity detection, a reference value
+	 * is used again for comparison and is updated whenever the
+	 * device exceeds the inactivity threshold. Once the reference
+	 * value is selected, the device compares the magnitude of the
+	 * difference between the reference value and the current
+	 * acceleration with inactivity_threshold. If the difference is below
+	 * inactivity_threshold for a total of inactivity_time, the device is
+	 * considered inactive and the inactivity interrupt is triggered.
+	 */
+
+#define ADXL_ACT_ACDC		(1 << 7)
+#define ADXL_ACT_X_EN		(1 << 6)
+#define ADXL_ACT_Y_EN		(1 << 5)
+#define ADXL_ACT_Z_EN		(1 << 4)
+#define ADXL_INACT_ACDC		(1 << 3)
+#define ADXL_INACT_X_EN		(1 << 2)
+#define ADXL_INACT_Y_EN		(1 << 1)
+#define ADXL_INACT_Z_EN		(1 << 0)
+
+	u8 act_axis_control;
+
+	/*
+	 * activity_threshold:
+	 * holds the threshold value for activity detection.
+	 * The data format is unsigned. The scale factor is
+	 * 62.5 mg/LSB. A zero value may result in undesirable behavior if
+	 * Activity interrupt is enabled.
+	 */
+
+	u8 activity_threshold;
+
+	/*
+	 * inactivity_threshold:
+	 * holds the threshold value for inactivity
+	 * detection. The data format is unsigned. The scale
+	 * factor is 62.5 mg/LSB. A zero value may result in undesirable
+	 * behavior if Inactivity interrupt is enabled.
+	 */
+
+	u8 inactivity_threshold;
+
+	/*
+	 * inactivity_time:
+	 * is an unsigned time value representing the
+	 * amount of time that acceleration must be below the value in
+	 * inactivity_threshold for inactivity to be declared. The scale factor
+	 * is 1 second/LSB. Unlike the other interrupt functions, which
+	 * operate on unfiltered data, the inactivity function operates on the
+	 * filtered output data. At least one output sample must be
+	 * generated for the inactivity interrupt to be triggered. This will
+	 * result in the function appearing un-responsive if the
+	 * inactivity_time register is set with a value less than the time
+	 * constant of the Output Data Rate. A zero value will result in an
+	 * interrupt when the output data is below inactivity_threshold.
+	 */
+
+	u8 inactivity_time;
+
+	/*
+	 * free_fall_threshold:
+	 * holds the threshold value for Free-Fall detection.
+	 * The data format is unsigned. The root-sum-square(RSS) value
+	 * of all axes is calculated and compared to the value in
+	 * free_fall_threshold to determine if a free fall event may be
+	 * occurring.  The scale factor is 62.5 mg/LSB. A zero value may
+	 * result in undesirable behavior if Free-Fall interrupt is
+	 * enabled. Values between 300 and 600 mg (0x05 to 0x09) are
+	 * recommended.
+	 */
+
+	u8 free_fall_threshold;
+
+	/*
+	 * free_fall_time:
+	 * is an unsigned time value representing the minimum
+	 * time that the RSS value of all axes must be less than
+	 * free_fall_threshold to generate a Free-Fall interrupt. The
+	 * scale factor is 5 ms/LSB. A zero value may result in
+	 * undesirable behavior if Free-Fall interrupt is enabled.
+	 * Values between 100 to 350 ms (0x14 to 0x46) are recommended.
+	 */
+
+	u8 free_fall_time;
+
+	/*
+	 * data_rate:
+	 * Selects device bandwidth and output data rate.
+	 * RATE = 3200 Hz / (2^(15 - x)). Default value is 0x0A, or 100 Hz
+	 * Output Data Rate. An Output Data Rate should be selected that
+	 * is appropriate for the communication protocol and frequency
+	 * selected. Selecting too high of an Output Data Rate with a low
+	 * communication speed will result in samples being discarded.
+	 */
+
+	u8 data_rate;
+
+	/*
+	 * data_range:
+	 * FULL_RES: When this bit is set with the device is
+	 * in Full-Resolution Mode, where the output resolution increases
+	 * with RANGE to maintain a 4 mg/LSB scale factor. When this
+	 * bit is cleared the device is in 10-bit Mode and RANGE determine the
+	 * maximum g-Range and scale factor.
+	 */
+
+#define ADXL_FULL_RES		(1 << 3)
+#define ADXL_RANGE_PM_2g	0
+#define ADXL_RANGE_PM_4g	1
+#define ADXL_RANGE_PM_8g	2
+#define ADXL_RANGE_PM_16g	3
+
+	u8 data_range;
+
+	/*
+	 * low_power_mode:
+	 * A '0' = Normal operation and a '1' = Reduced
+	 * power operation with somewhat higher noise.
+	 */
+
+	u8 low_power_mode;
+
+	/*
+	 * power_mode:
+	 * LINK: A '1' with both the activity and inactivity functions
+	 * enabled will delay the start of the activity function until
+	 * inactivity is detected. Once activity is detected, inactivity
+	 * detection will begin and prevent the detection of activity. This
+	 * bit serially links the activity and inactivity functions. When '0'
+	 * the inactivity and activity functions are concurrent. Additional
+	 * information can be found in the ADXL34x datasheet's Application
+	 * section under Link Mode.
+	 * AUTO_SLEEP: A '1' sets the ADXL34x to switch to Sleep Mode
+	 * when inactivity (acceleration has been below inactivity_threshold
+	 * for at least inactivity_time) is detected and the LINK bit is set.
+	 * A '0' disables automatic switching to Sleep Mode. See the
+	 * Sleep Bit section of the ADXL34x datasheet for more information.
+	 */
+
+#define ADXL_LINK	(1 << 5)
+#define ADXL_AUTO_SLEEP	(1 << 4)
+
+	u8 power_mode;
+
+	/*
+	 * fifo_mode:
+	 * BYPASS The FIFO is bypassed
+	 * FIFO   FIFO collects up to 32 values then stops collecting data
+	 * STREAM FIFO holds the last 32 data values. Once full, the FIFO's
+	 *        oldest data is lost as it is replaced with newer data
+	 *
+	 * DEFAULT should be ADXL_FIFO_STREAM
+	 */
+
+#define ADXL_FIFO_BYPASS	0
+#define ADXL_FIFO_FIFO		1
+#define ADXL_FIFO_STREAM	2
+
+	u8 fifo_mode;
+
+	/*
+	 * watermark:
+	 * The Watermark feature can be used to reduce the interrupt load
+	 * of the system. The FIFO fills up to the value stored in watermark
+	 * [1..32] and then generates an interrupt.
+	 * A '0' disables the watermark feature.
+	 */
+
+	u8 watermark;
+
+	/*
+	 * When acceleration measurements are received from the ADXL34x
+	 * events are sent to the event subsystem. The following settings
+	 * select the event type and event code for new x, y and z axis data
+	 * respectively.
+	 */
+	u32 ev_type;	/* EV_ABS or EV_REL */
+
+	u32 ev_code_x;	/* ABS_X,Y,Z or REL_X,Y,Z */
+	u32 ev_code_y;	/* ABS_X,Y,Z or REL_X,Y,Z */
+	u32 ev_code_z;	/* ABS_X,Y,Z or REL_X,Y,Z */
+
+	/*
+	 * A valid BTN or KEY Code; use tap_axis_control to disable
+	 * event reporting
+	 */
+
+	u32 ev_code_tap[3];	/* EV_KEY {X-Axis, Y-Axis, Z-Axis} */
+
+	/*
+	 * A valid BTN or KEY Code for Free-Fall or Activity enables
+	 * input event reporting. A '0' disables the Free-Fall or
+	 * Activity reporting.
+	 */
+
+	u32 ev_code_ff;	/* EV_KEY */
+	u32 ev_code_act_inactivity;	/* EV_KEY */
+
+	/*
+	 * Use ADXL34x INT2 pin instead of INT1 pin for interrupt output
+	 */
+	u8 use_int2;
+
+	/*
+	 * ADXL346 only ORIENTATION SENSING feature
+	 * The orientation function of the ADXL346 reports both 2-D and
+	 * 3-D orientation concurrently.
+	 */
+
+#define ADXL_EN_ORIENTATION_2D		1
+#define ADXL_EN_ORIENTATION_3D		2
+#define ADXL_EN_ORIENTATION_2D_3D	3
+
+	u8 orientation_enable;
+
+	/*
+	 * The width of the deadzone region between two or more
+	 * orientation positions is determined by setting the Deadzone
+	 * value. The deadzone region size can be specified with a
+	 * resolution of 3.6deg. The deadzone angle represents the total
+	 * angle where the orientation is considered invalid.
+	 */
+
+#define ADXL_DEADZONE_ANGLE_0p0		0	/* !!!0.0 [deg] */
+#define ADXL_DEADZONE_ANGLE_3p6		1	/* 3.6 [deg] */
+#define ADXL_DEADZONE_ANGLE_7p2		2	/* 7.2 [deg] */
+#define ADXL_DEADZONE_ANGLE_10p8	3	/* 10.8 [deg] */
+#define ADXL_DEADZONE_ANGLE_14p4	4	/* 14.4 [deg] */
+#define ADXL_DEADZONE_ANGLE_18p0	5	/* 18.0 [deg] */
+#define ADXL_DEADZONE_ANGLE_21p6	6	/* 21.6 [deg] */
+#define ADXL_DEADZONE_ANGLE_25p2	7	/* 25.2 [deg] */
+
+	u8 deadzone_angle;
+
+	/*
+	 * To eliminate most human motion such as walking or shaking,
+	 * a Divisor value should be selected to effectively limit the
+	 * orientation bandwidth. Set the depth of the filter used to
+	 * low-pass filter the measured acceleration for stable
+	 * orientation sensing
+	 */
+
+#define ADXL_LP_FILTER_DIVISOR_2	0
+#define ADXL_LP_FILTER_DIVISOR_4	1
+#define ADXL_LP_FILTER_DIVISOR_8	2
+#define ADXL_LP_FILTER_DIVISOR_16	3
+#define ADXL_LP_FILTER_DIVISOR_32	4
+#define ADXL_LP_FILTER_DIVISOR_64	5
+#define ADXL_LP_FILTER_DIVISOR_128	6
+#define ADXL_LP_FILTER_DIVISOR_256	7
+
+	u8 divisor_length;
+
+	u32 ev_codes_orient_2d[4];	/* EV_KEY {+X, -X, +Y, -Y} */
+	u32 ev_codes_orient_3d[6];	/* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */
+};
+#endif
diff --git a/include/linux/input/as5011.h b/include/linux/input/as5011.h
new file mode 100644
index 00000000..1affd0dd
--- /dev/null
+++ b/include/linux/input/as5011.h
@@ -0,0 +1,20 @@
+#ifndef _AS5011_H
+#define _AS5011_H
+
+/*
+ * Copyright (c) 2010, 2011 Fabien Marteau <fabien.marteau@armadeus.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+struct as5011_platform_data {
+	unsigned int button_gpio;
+	unsigned int axis_irq; /* irq number */
+	unsigned long axis_irqflags;
+	char xp, xn; /* threshold for x axis */
+	char yp, yn; /* threshold for y axis */
+};
+
+#endif /* _AS5011_H */
diff --git a/include/linux/input/auo-pixcir-ts.h b/include/linux/input/auo-pixcir-ts.h
new file mode 100644
index 00000000..75d4be71
--- /dev/null
+++ b/include/linux/input/auo-pixcir-ts.h
@@ -0,0 +1,56 @@
+/*
+ * Driver for AUO in-cell touchscreens
+ *
+ * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de>
+ *
+ * based on auo_touch.h from Dell Streak kernel
+ *
+ * Copyright (c) 2008 QUALCOMM Incorporated.
+ * Copyright (c) 2008 QUALCOMM USA, INC.
+ *
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __AUO_PIXCIR_TS_H__
+#define __AUO_PIXCIR_TS_H__
+
+/*
+ * Interrupt modes:
+ * periodical:		interrupt is asserted periodicaly
+ * compare coordinates:	interrupt is asserted when coordinates change
+ * indicate touch:	interrupt is asserted during touch
+ */
+#define AUO_PIXCIR_INT_PERIODICAL	0x00
+#define AUO_PIXCIR_INT_COMP_COORD	0x01
+#define AUO_PIXCIR_INT_TOUCH_IND	0x02
+
+/*
+ * @gpio_int		interrupt gpio
+ * @int_setting		one of AUO_PIXCIR_INT_*
+ * @init_hw		hardwarespecific init
+ * @exit_hw		hardwarespecific shutdown
+ * @x_max		x-resolution
+ * @y_max		y-resolution
+ */
+struct auo_pixcir_ts_platdata {
+	int gpio_int;
+
+	int int_setting;
+
+	void (*init_hw)(struct i2c_client *);
+	void (*exit_hw)(struct i2c_client *);
+
+	unsigned int x_max;
+	unsigned int y_max;
+};
+
+#endif
diff --git a/include/linux/input/bu21013.h b/include/linux/input/bu21013.h
new file mode 100644
index 00000000..05e03284
--- /dev/null
+++ b/include/linux/input/bu21013.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Naveen Kumar G <naveen.gaddipati@stericsson.com> for ST-Ericsson
+ * License terms:GNU General Public License (GPL) version 2
+ */
+
+#ifndef _BU21013_H
+#define _BU21013_H
+
+/**
+ * struct bu21013_platform_device - Handle the platform data
+ * @cs_en:	pointer to the cs enable function
+ * @cs_dis:	pointer to the cs disable function
+ * @irq_read_val:    pointer to read the pen irq value function
+ * @touch_x_max: touch x max
+ * @touch_y_max: touch y max
+ * @cs_pin: chip select pin
+ * @irq: irq pin
+ * @ext_clk: external clock flag
+ * @x_flip: x flip flag
+ * @y_flip: y flip flag
+ * @wakeup: wakeup flag
+ *
+ * This is used to handle the platform data
+ */
+struct bu21013_platform_device {
+	int (*cs_en)(int reset_pin);
+	int (*cs_dis)(int reset_pin);
+	int (*irq_read_val)(void);
+	int touch_x_max;
+	int touch_y_max;
+	unsigned int cs_pin;
+	unsigned int irq;
+	bool ext_clk;
+	bool x_flip;
+	bool y_flip;
+	bool wakeup;
+};
+
+#endif
diff --git a/include/linux/input/cma3000.h b/include/linux/input/cma3000.h
new file mode 100644
index 00000000..cbbaac27
--- /dev/null
+++ b/include/linux/input/cma3000.h
@@ -0,0 +1,59 @@
+/*
+ * VTI CMA3000_Dxx Accelerometer driver
+ *
+ * Copyright (C) 2010 Texas Instruments
+ * Author: Hemanth V <hemanthv@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _LINUX_CMA3000_H
+#define _LINUX_CMA3000_H
+
+#define CMAMODE_DEFAULT    0
+#define CMAMODE_MEAS100    1
+#define CMAMODE_MEAS400    2
+#define CMAMODE_MEAS40     3
+#define CMAMODE_MOTDET     4
+#define CMAMODE_FF100      5
+#define CMAMODE_FF400      6
+#define CMAMODE_POFF       7
+
+#define CMARANGE_2G   2000
+#define CMARANGE_8G   8000
+
+/**
+ * struct cma3000_i2c_platform_data - CMA3000 Platform data
+ * @fuzz_x: Noise on X Axis
+ * @fuzz_y: Noise on Y Axis
+ * @fuzz_z: Noise on Z Axis
+ * @g_range: G range in milli g i.e 2000 or 8000
+ * @mode: Operating mode
+ * @mdthr: Motion detect threshold value
+ * @mdfftmr: Motion detect and free fall time value
+ * @ffthr: Free fall threshold value
+ */
+
+struct cma3000_platform_data {
+	int fuzz_x;
+	int fuzz_y;
+	int fuzz_z;
+	int g_range;
+	uint8_t mode;
+	uint8_t mdthr;
+	uint8_t mdfftmr;
+	uint8_t ffthr;
+	unsigned long irqflags;
+};
+
+#endif
diff --git a/include/linux/input/cy8ctmg110_pdata.h b/include/linux/input/cy8ctmg110_pdata.h
new file mode 100644
index 00000000..09522cb5
--- /dev/null
+++ b/include/linux/input/cy8ctmg110_pdata.h
@@ -0,0 +1,10 @@
+#ifndef _LINUX_CY8CTMG110_PDATA_H
+#define _LINUX_CY8CTMG110_PDATA_H
+
+struct cy8ctmg110_pdata
+{
+	int reset_pin;		/* Reset pin is wired to this GPIO (optional) */
+	int irq_pin;		/* IRQ pin is wired to this GPIO */
+};
+
+#endif
diff --git a/include/linux/input/cyttsp.h b/include/linux/input/cyttsp.h
new file mode 100644
index 00000000..5af7c66f
--- /dev/null
+++ b/include/linux/input/cyttsp.h
@@ -0,0 +1,58 @@
+/*
+ * Header file for:
+ * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers.
+ * For use with Cypress Txx3xx parts.
+ * Supported parts include:
+ * CY8CTST341
+ * CY8CTMA340
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com (kev@cypress.com)
+ *
+ */
+#ifndef _CYTTSP_H_
+#define _CYTTSP_H_
+
+#define CY_SPI_NAME "cyttsp-spi"
+#define CY_I2C_NAME "cyttsp-i2c"
+/* Active Power state scanning/processing refresh interval */
+#define CY_ACT_INTRVL_DFLT 0x00 /* ms */
+/* touch timeout for the Active power */
+#define CY_TCH_TMOUT_DFLT 0xFF /* ms */
+/* Low Power state scanning/processing refresh interval */
+#define CY_LP_INTRVL_DFLT 0x0A /* ms */
+/* Active distance in pixels for a gesture to be reported */
+#define CY_ACT_DIST_DFLT 0xF8 /* pixels */
+
+struct cyttsp_platform_data {
+	u32 maxx;
+	u32 maxy;
+	bool use_hndshk;
+	u8 act_dist;	/* Active distance */
+	u8 act_intrvl;  /* Active refresh interval; ms */
+	u8 tch_tmout;   /* Active touch timeout; ms */
+	u8 lp_intrvl;   /* Low power refresh interval; ms */
+	int (*init)(void);
+	void (*exit)(void);
+	char *name;
+	s16 irq_gpio;
+	u8 *bl_keys;
+};
+
+#endif /* _CYTTSP_H_ */
diff --git a/include/linux/input/eeti_ts.h b/include/linux/input/eeti_ts.h
new file mode 100644
index 00000000..f875b316
--- /dev/null
+++ b/include/linux/input/eeti_ts.h
@@ -0,0 +1,9 @@
+#ifndef LINUX_INPUT_EETI_TS_H
+#define LINUX_INPUT_EETI_TS_H
+
+struct eeti_ts_platform_data {
+	unsigned int irq_active_high;
+};
+
+#endif /* LINUX_INPUT_EETI_TS_H */
+
diff --git a/include/linux/input/gp2ap002a00f.h b/include/linux/input/gp2ap002a00f.h
new file mode 100644
index 00000000..aad2fd44
--- /dev/null
+++ b/include/linux/input/gp2ap002a00f.h
@@ -0,0 +1,22 @@
+#ifndef _GP2AP002A00F_H_
+#define _GP2AP002A00F_H_
+
+#include <linux/i2c.h>
+
+#define GP2A_I2C_NAME "gp2ap002a00f"
+
+/**
+ * struct gp2a_platform_data - Sharp gp2ap002a00f proximity platform data
+ * @vout_gpio: The gpio connected to the object detected pin (VOUT)
+ * @wakeup: Set to true if the proximity can wake the device from suspend
+ * @hw_setup: Callback for setting up hardware such as gpios and vregs
+ * @hw_shutdown: Callback for properly shutting down hardware
+ */
+struct gp2a_platform_data {
+	int vout_gpio;
+	bool wakeup;
+	int (*hw_setup)(struct i2c_client *client);
+	int (*hw_shutdown)(struct i2c_client *client);
+};
+
+#endif
diff --git a/include/linux/input/gpio_tilt.h b/include/linux/input/gpio_tilt.h
new file mode 100644
index 00000000..c1cc52d3
--- /dev/null
+++ b/include/linux/input/gpio_tilt.h
@@ -0,0 +1,73 @@
+#ifndef _INPUT_GPIO_TILT_H
+#define _INPUT_GPIO_TILT_H
+
+/**
+ * struct gpio_tilt_axis - Axis used by the tilt switch
+ * @axis:		Constant describing the axis, e.g. ABS_X
+ * @min:		minimum value for abs_param
+ * @max:		maximum value for abs_param
+ * @fuzz:		fuzz value for abs_param
+ * @flat:		flat value for abs_param
+ */
+struct gpio_tilt_axis {
+	int axis;
+	int min;
+	int max;
+	int fuzz;
+	int flat;
+};
+
+/**
+ * struct gpio_tilt_state - state description
+ * @gpios:		bitfield of gpio target-states for the value
+ * @axes:		array containing the axes settings for the gpio state
+ *			The array indizes must correspond to the axes defined
+ *			in platform_data
+ *
+ * This structure describes a supported axis settings
+ * and the necessary gpio-state which represent it.
+ *
+ * The n-th bit in the bitfield describes the state of the n-th GPIO
+ * from the gpios-array defined in gpio_regulator_config below.
+ */
+struct gpio_tilt_state {
+	int gpios;
+	int *axes;
+};
+
+/**
+ * struct gpio_tilt_platform_data
+ * @gpios:		Array containing the gpios determining the tilt state
+ * @nr_gpios:		Number of gpios
+ * @axes:		Array of gpio_tilt_axis descriptions
+ * @nr_axes:		Number of axes
+ * @states:		Array of gpio_tilt_state entries describing
+ *			the gpio state for specific tilts
+ * @nr_states:		Number of states available
+ * @debounce_interval:	debounce ticks interval in msecs
+ * @poll_interval:	polling interval in msecs - for polling driver only
+ * @enable:		callback to enable the tilt switch
+ * @disable:		callback to disable the tilt switch
+ *
+ * This structure contains gpio-tilt-switch configuration
+ * information that must be passed by platform code to the
+ * gpio-tilt input driver.
+ */
+struct gpio_tilt_platform_data {
+	struct gpio *gpios;
+	int nr_gpios;
+
+	struct gpio_tilt_axis *axes;
+	int nr_axes;
+
+	struct gpio_tilt_state *states;
+	int nr_states;
+
+	int debounce_interval;
+
+	unsigned int poll_interval;
+	int (*enable)(struct device *dev);
+	void (*disable)(struct device *dev);
+};
+
+#endif
diff --git a/include/linux/input/ili210x.h b/include/linux/input/ili210x.h
new file mode 100644
index 00000000..a5471245
--- /dev/null
+++ b/include/linux/input/ili210x.h
@@ -0,0 +1,10 @@
+#ifndef _ILI210X_H
+#define _ILI210X_H
+
+struct ili210x_platform_data {
+	unsigned long irq_flags;
+	unsigned int poll_period;
+	bool (*get_pendown_state)(void);
+};
+
+#endif
diff --git a/include/linux/input/kxtj9.h b/include/linux/input/kxtj9.h
new file mode 100644
index 00000000..d415579b
--- /dev/null
+++ b/include/linux/input/kxtj9.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2011 Kionix, Inc.
+ * Written by Chris Hudson <chudson@kionix.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307, USA
+ */
+
+#ifndef __KXTJ9_H__
+#define __KXTJ9_H__
+
+#define KXTJ9_I2C_ADDR		0x0F
+
+struct kxtj9_platform_data {
+	unsigned int min_interval;	/* minimum poll interval (in milli-seconds) */
+	unsigned int init_interval;	/* initial poll interval (in milli-seconds) */
+
+	/*
+	 * By default, x is axis 0, y is axis 1, z is axis 2; these can be
+	 * changed to account for sensor orientation within the host device.
+	 */
+	u8 axis_map_x;
+	u8 axis_map_y;
+	u8 axis_map_z;
+
+	/*
+	 * Each axis can be negated to account for sensor orientation within
+	 * the host device.
+	 */
+	bool negate_x;
+	bool negate_y;
+	bool negate_z;
+
+	/* CTRL_REG1: set resolution, g-range, data ready enable */
+	/* Output resolution: 8-bit valid or 12-bit valid */
+	#define RES_8BIT		0
+	#define RES_12BIT		(1 << 6)
+	u8 res_12bit;
+	/* Output g-range: +/-2g, 4g, or 8g */
+	#define KXTJ9_G_2G		0
+	#define KXTJ9_G_4G		(1 << 3)
+	#define KXTJ9_G_8G		(1 << 4)
+	u8 g_range;
+
+	int (*init)(void);
+	void (*exit)(void);
+	int (*power_on)(void);
+	int (*power_off)(void);
+};
+#endif  /* __KXTJ9_H__ */
diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h
new file mode 100644
index 00000000..6c07ced0
--- /dev/null
+++ b/include/linux/input/matrix_keypad.h
@@ -0,0 +1,128 @@
+#ifndef _MATRIX_KEYPAD_H
+#define _MATRIX_KEYPAD_H
+
+#include <linux/types.h>
+#include <linux/input.h>
+#include <linux/of.h>
+
+#define MATRIX_MAX_ROWS		32
+#define MATRIX_MAX_COLS		32
+
+#define KEY(row, col, val)	((((row) & (MATRIX_MAX_ROWS - 1)) << 24) |\
+				 (((col) & (MATRIX_MAX_COLS - 1)) << 16) |\
+				 ((val) & 0xffff))
+
+#define KEY_ROW(k)		(((k) >> 24) & 0xff)
+#define KEY_COL(k)		(((k) >> 16) & 0xff)
+#define KEY_VAL(k)		((k) & 0xffff)
+
+#define MATRIX_SCAN_CODE(row, col, row_shift)	(((row) << (row_shift)) + (col))
+
+/**
+ * struct matrix_keymap_data - keymap for matrix keyboards
+ * @keymap: pointer to array of uint32 values encoded with KEY() macro
+ *	representing keymap
+ * @keymap_size: number of entries (initialized) in this keymap
+ *
+ * This structure is supposed to be used by platform code to supply
+ * keymaps to drivers that implement matrix-like keypads/keyboards.
+ */
+struct matrix_keymap_data {
+	const uint32_t *keymap;
+	unsigned int	keymap_size;
+};
+
+/**
+ * struct matrix_keypad_platform_data - platform-dependent keypad data
+ * @keymap_data: pointer to &matrix_keymap_data
+ * @row_gpios: pointer to array of gpio numbers representing rows
+ * @col_gpios: pointer to array of gpio numbers reporesenting colums
+ * @num_row_gpios: actual number of row gpios used by device
+ * @num_col_gpios: actual number of col gpios used by device
+ * @col_scan_delay_us: delay, measured in microseconds, that is
+ *	needed before we can keypad after activating column gpio
+ * @debounce_ms: debounce interval in milliseconds
+ * @clustered_irq: may be specified if interrupts of all row/column GPIOs
+ *	are bundled to one single irq
+ * @clustered_irq_flags: flags that are needed for the clustered irq
+ * @active_low: gpio polarity
+ * @wakeup: controls whether the device should be set up as wakeup
+ *	source
+ * @no_autorepeat: disable key autorepeat
+ *
+ * This structure represents platform-specific data that use used by
+ * matrix_keypad driver to perform proper initialization.
+ */
+struct matrix_keypad_platform_data {
+	const struct matrix_keymap_data *keymap_data;
+
+	const unsigned int *row_gpios;
+	const unsigned int *col_gpios;
+
+	unsigned int	num_row_gpios;
+	unsigned int	num_col_gpios;
+
+	unsigned int	col_scan_delay_us;
+
+	/* key debounce interval in milli-second */
+	unsigned int	debounce_ms;
+
+	unsigned int	clustered_irq;
+	unsigned int	clustered_irq_flags;
+
+	bool		active_low;
+	bool		wakeup;
+	bool		no_autorepeat;
+};
+
+/**
+ * matrix_keypad_build_keymap - convert platform keymap into matrix keymap
+ * @keymap_data: keymap supplied by the platform code
+ * @row_shift: number of bits to shift row value by to advance to the next
+ * line in the keymap
+ * @keymap: expanded version of keymap that is suitable for use by
+ * matrix keyboad driver
+ * @keybit: pointer to bitmap of keys supported by input device
+ *
+ * This function converts platform keymap (encoded with KEY() macro) into
+ * an array of keycodes that is suitable for using in a standard matrix
+ * keyboard driver that uses row and col as indices.
+ */
+static inline void
+matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data,
+			   unsigned int row_shift,
+			   unsigned short *keymap, unsigned long *keybit)
+{
+	int i;
+
+	for (i = 0; i < keymap_data->keymap_size; i++) {
+		unsigned int key = keymap_data->keymap[i];
+		unsigned int row = KEY_ROW(key);
+		unsigned int col = KEY_COL(key);
+		unsigned short code = KEY_VAL(key);
+
+		keymap[MATRIX_SCAN_CODE(row, col, row_shift)] = code;
+		__set_bit(code, keybit);
+	}
+	__clear_bit(KEY_RESERVED, keybit);
+}
+
+#ifdef CONFIG_INPUT_OF_MATRIX_KEYMAP
+struct matrix_keymap_data *
+matrix_keyboard_of_fill_keymap(struct device_node *np, const char *propname);
+
+void matrix_keyboard_of_free_keymap(const struct matrix_keymap_data *kd);
+#else
+static inline struct matrix_keymap_data *
+matrix_keyboard_of_fill_keymap(struct device_node *np, const char *propname)
+{
+	return NULL;
+}
+
+static inline void
+matrix_keyboard_of_free_keymap(const struct matrix_keymap_data *kd)
+{
+}
+#endif
+
+#endif /* _MATRIX_KEYPAD_H */
diff --git a/include/linux/input/mt.h b/include/linux/input/mt.h
new file mode 100644
index 00000000..f8673758
--- /dev/null
+++ b/include/linux/input/mt.h
@@ -0,0 +1,67 @@
+#ifndef _INPUT_MT_H
+#define _INPUT_MT_H
+
+/*
+ * Input Multitouch Library
+ *
+ * Copyright (c) 2010 Henrik Rydberg
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/input.h>
+
+#define TRKID_MAX	0xffff
+
+/**
+ * struct input_mt_slot - represents the state of an input MT slot
+ * @abs: holds current values of ABS_MT axes for this slot
+ */
+struct input_mt_slot {
+	int abs[ABS_MT_LAST - ABS_MT_FIRST + 1];
+};
+
+static inline void input_mt_set_value(struct input_mt_slot *slot,
+				      unsigned code, int value)
+{
+	slot->abs[code - ABS_MT_FIRST] = value;
+}
+
+static inline int input_mt_get_value(const struct input_mt_slot *slot,
+				     unsigned code)
+{
+	return slot->abs[code - ABS_MT_FIRST];
+}
+
+int input_mt_init_slots(struct input_dev *dev, unsigned int num_slots);
+void input_mt_destroy_slots(struct input_dev *dev);
+
+static inline int input_mt_new_trkid(struct input_dev *dev)
+{
+	return dev->trkid++ & TRKID_MAX;
+}
+
+static inline void input_mt_slot(struct input_dev *dev, int slot)
+{
+	input_event(dev, EV_ABS, ABS_MT_SLOT, slot);
+}
+
+static inline bool input_is_mt_value(int axis)
+{
+	return axis >= ABS_MT_FIRST && axis <= ABS_MT_LAST;
+}
+
+static inline bool input_is_mt_axis(int axis)
+{
+	return axis == ABS_MT_SLOT || input_is_mt_value(axis);
+}
+
+void input_mt_report_slot_state(struct input_dev *dev,
+				unsigned int tool_type, bool active);
+
+void input_mt_report_finger_count(struct input_dev *dev, int count);
+void input_mt_report_pointer_emulation(struct input_dev *dev, bool use_count);
+
+#endif
diff --git a/include/linux/input/pixcir_ts.h b/include/linux/input/pixcir_ts.h
new file mode 100644
index 00000000..7163d91c
--- /dev/null
+++ b/include/linux/input/pixcir_ts.h
@@ -0,0 +1,10 @@
+#ifndef	_PIXCIR_I2C_TS_H
+#define	_PIXCIR_I2C_TS_H
+
+struct pixcir_ts_platform_data {
+	int (*attb_read_val)(void);
+	int x_max;
+	int y_max;
+};
+
+#endif
diff --git a/include/linux/input/pmic8xxx-keypad.h b/include/linux/input/pmic8xxx-keypad.h
new file mode 100644
index 00000000..5f1e2f9a
--- /dev/null
+++ b/include/linux/input/pmic8xxx-keypad.h
@@ -0,0 +1,52 @@
+/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __PMIC8XXX_KEYPAD_H__
+#define __PMIC8XXX_KEYPAD_H__
+
+#include <linux/input/matrix_keypad.h>
+
+#define PM8XXX_KEYPAD_DEV_NAME     "pm8xxx-keypad"
+
+/**
+ * struct pm8xxx_keypad_platform_data - platform data for keypad
+ * @keymap_data - matrix keymap data
+ * @input_name - input device name
+ * @input_phys_device - input device name
+ * @num_cols - number of columns of keypad
+ * @num_rows - number of row of keypad
+ * @debounce_ms - debounce period in milliseconds
+ * @scan_delay_ms - scan delay in milliseconds
+ * @row_hold_ns - row hold period in nanoseconds
+ * @wakeup - configure keypad as wakeup
+ * @rep - enable or disable key repeat bit
+ */
+struct pm8xxx_keypad_platform_data {
+	const struct matrix_keymap_data *keymap_data;
+
+	const char *input_name;
+	const char *input_phys_device;
+
+	unsigned int num_cols;
+	unsigned int num_rows;
+	unsigned int rows_gpio_start;
+	unsigned int cols_gpio_start;
+
+	unsigned int debounce_ms;
+	unsigned int scan_delay_ms;
+	unsigned int row_hold_ns;
+
+	bool wakeup;
+	bool rep;
+};
+
+#endif /*__PMIC8XXX_KEYPAD_H__ */
diff --git a/include/linux/input/pmic8xxx-pwrkey.h b/include/linux/input/pmic8xxx-pwrkey.h
new file mode 100644
index 00000000..6d2974e5
--- /dev/null
+++ b/include/linux/input/pmic8xxx-pwrkey.h
@@ -0,0 +1,31 @@
+/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __PMIC8XXX_PWRKEY_H__
+#define __PMIC8XXX_PWRKEY_H__
+
+#define PM8XXX_PWRKEY_DEV_NAME "pm8xxx-pwrkey"
+
+/**
+ * struct pm8xxx_pwrkey_platform_data - platform data for pwrkey driver
+ * @pull up:  power on register control for pull up/down configuration
+ * @kpd_trigger_delay_us: time delay for power key state change interrupt
+ *                  trigger.
+ * @wakeup: configure power key as wakeup source
+ */
+struct pm8xxx_pwrkey_platform_data  {
+	bool pull_up;
+	u32  kpd_trigger_delay_us;
+	u32  wakeup;
+};
+
+#endif /* __PMIC8XXX_PWRKEY_H__ */
diff --git a/include/linux/input/samsung-keypad.h b/include/linux/input/samsung-keypad.h
new file mode 100644
index 00000000..f25619bf
--- /dev/null
+++ b/include/linux/input/samsung-keypad.h
@@ -0,0 +1,43 @@
+/*
+ * Samsung Keypad platform data definitions
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __SAMSUNG_KEYPAD_H
+#define __SAMSUNG_KEYPAD_H
+
+#include <linux/input/matrix_keypad.h>
+
+#define SAMSUNG_MAX_ROWS	8
+#define SAMSUNG_MAX_COLS	8
+
+/**
+ * struct samsung_keypad_platdata - Platform device data for Samsung Keypad.
+ * @keymap_data: pointer to &matrix_keymap_data.
+ * @rows: number of keypad row supported.
+ * @cols: number of keypad col supported.
+ * @no_autorepeat: disable key autorepeat.
+ * @wakeup: controls whether the device should be set up as wakeup source.
+ * @cfg_gpio: configure the GPIO.
+ *
+ * Initialisation data specific to either the machine or the platform
+ * for the device driver to use or call-back when configuring gpio.
+ */
+struct samsung_keypad_platdata {
+	const struct matrix_keymap_data	*keymap_data;
+	unsigned int rows;
+	unsigned int cols;
+	bool no_autorepeat;
+	bool wakeup;
+
+	void (*cfg_gpio)(unsigned int rows, unsigned int cols);
+};
+
+#endif /* __SAMSUNG_KEYPAD_H */
diff --git a/include/linux/input/sh_keysc.h b/include/linux/input/sh_keysc.h
new file mode 100644
index 00000000..5d253cd9
--- /dev/null
+++ b/include/linux/input/sh_keysc.h
@@ -0,0 +1,15 @@
+#ifndef __SH_KEYSC_H__
+#define __SH_KEYSC_H__
+
+#define SH_KEYSC_MAXKEYS 64
+
+struct sh_keysc_info {
+	enum { SH_KEYSC_MODE_1, SH_KEYSC_MODE_2, SH_KEYSC_MODE_3,
+	       SH_KEYSC_MODE_4, SH_KEYSC_MODE_5, SH_KEYSC_MODE_6 } mode;
+	int scan_timing; /* 0 -> 7, see KYCR1, SCN[2:0] */
+	int delay;
+	int kycr2_delay;
+	int keycodes[SH_KEYSC_MAXKEYS]; /* KEYIN * KEYOUT */
+};
+
+#endif /* __SH_KEYSC_H__ */
diff --git a/include/linux/input/sparse-keymap.h b/include/linux/input/sparse-keymap.h
new file mode 100644
index 00000000..52db6206
--- /dev/null
+++ b/include/linux/input/sparse-keymap.h
@@ -0,0 +1,62 @@
+#ifndef _SPARSE_KEYMAP_H
+#define _SPARSE_KEYMAP_H
+
+/*
+ * Copyright (c) 2009 Dmitry Torokhov
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#define KE_END		0	/* Indicates end of keymap */
+#define KE_KEY		1	/* Ordinary key/button */
+#define KE_SW		2	/* Switch (predetermined value) */
+#define KE_VSW		3	/* Switch (value supplied at runtime) */
+#define KE_IGNORE	4	/* Known entry that should be ignored */
+#define KE_LAST		KE_IGNORE
+
+/**
+ * struct key_entry - keymap entry for use in sparse keymap
+ * @type: Type of the key entry (KE_KEY, KE_SW, KE_VSW, KE_END);
+ *	drivers are allowed to extend the list with their own
+ *	private definitions.
+ * @code: Device-specific data identifying the button/switch
+ * @keycode: KEY_* code assigned to a key/button
+ * @sw.code: SW_* code assigned to a switch
+ * @sw.value: Value that should be sent in an input even when KE_SW
+ *	switch is toggled. KE_VSW switches ignore this field and
+ *	expect driver to supply value for the event.
+ *
+ * This structure defines an entry in a sparse keymap used by some
+ * input devices for which traditional table-based approach is not
+ * suitable.
+ */
+struct key_entry {
+	int type;		/* See KE_* above */
+	u32 code;
+	union {
+		u16 keycode;		/* For KE_KEY */
+		struct {		/* For KE_SW, KE_VSW */
+			u8 code;
+			u8 value;	/* For KE_SW, ignored by KE_VSW */
+		} sw;
+	};
+};
+
+struct key_entry *sparse_keymap_entry_from_scancode(struct input_dev *dev,
+						    unsigned int code);
+struct key_entry *sparse_keymap_entry_from_keycode(struct input_dev *dev,
+						   unsigned int code);
+int sparse_keymap_setup(struct input_dev *dev,
+			const struct key_entry *keymap,
+			int (*setup)(struct input_dev *, struct key_entry *));
+void sparse_keymap_free(struct input_dev *dev);
+
+void sparse_keymap_report_entry(struct input_dev *dev, const struct key_entry *ke,
+				unsigned int value, bool autorelease);
+
+bool sparse_keymap_report_event(struct input_dev *dev, unsigned int code,
+				unsigned int value, bool autorelease);
+
+#endif /* _SPARSE_KEYMAP_H */
diff --git a/include/linux/input/tca8418_keypad.h b/include/linux/input/tca8418_keypad.h
new file mode 100644
index 00000000..e71a85dc
--- /dev/null
+++ b/include/linux/input/tca8418_keypad.h
@@ -0,0 +1,44 @@
+/*
+ * TCA8418 keypad platform support
+ *
+ * Copyright (C) 2011 Fuel7, Inc.  All rights reserved.
+ *
+ * Author: Kyle Manna <kyle.manna@fuel7.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License v2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the
+ * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 021110-1307, USA.
+ *
+ * If you can't comply with GPLv2, alternative licensing terms may be
+ * arranged. Please contact Fuel7, Inc. (http://fuel7.com/) for proprietary
+ * alternative licensing inquiries.
+ */
+
+#ifndef _TCA8418_KEYPAD_H
+#define _TCA8418_KEYPAD_H
+
+#include <linux/types.h>
+#include <linux/input/matrix_keypad.h>
+
+#define TCA8418_I2C_ADDR	0x34
+#define	TCA8418_NAME		"tca8418_keypad"
+
+struct tca8418_keypad_platform_data {
+	const struct matrix_keymap_data *keymap_data;
+	unsigned rows;
+	unsigned cols;
+	bool rep;
+	bool irq_is_gpio;
+};
+
+#endif
diff --git a/include/linux/input/ti_tscadc.h b/include/linux/input/ti_tscadc.h
new file mode 100644
index 00000000..b10a527a
--- /dev/null
+++ b/include/linux/input/ti_tscadc.h
@@ -0,0 +1,17 @@
+#ifndef __LINUX_TI_TSCADC_H
+#define __LINUX_TI_TSCADC_H
+
+/**
+ * struct tsc_data	Touchscreen wire configuration
+ * @wires:		Wires refer to application modes
+ *			i.e. 4/5/8 wire touchscreen support
+ *			on the platform.
+ * @x_plate_resistance:	X plate resistance.
+ */
+
+struct tsc_data {
+	int wires;
+	int x_plate_resistance;
+};
+
+#endif
diff --git a/include/linux/input/tps6507x-ts.h b/include/linux/input/tps6507x-ts.h
new file mode 100644
index 00000000..ab144031
--- /dev/null
+++ b/include/linux/input/tps6507x-ts.h
@@ -0,0 +1,24 @@
+/* linux/i2c/tps6507x-ts.h
+ *
+ * Functions to access TPS65070 touch screen chip.
+ *
+ * Copyright (c) 2009 RidgeRun (todd.fischer@ridgerun.com)
+ *
+ *
+ *  For licencing details see kernel-base/COPYING
+ */
+
+#ifndef __LINUX_I2C_TPS6507X_TS_H
+#define __LINUX_I2C_TPS6507X_TS_H
+
+/* Board specific touch screen initial values */
+struct touchscreen_init_data {
+	int	poll_period;	/* ms */
+	int	vref;		/* non-zero to leave vref on */
+	__u16	min_pressure;	/* min reading to be treated as a touch */
+	__u16	vendor;
+	__u16	product;
+	__u16	version;
+};
+
+#endif /*  __LINUX_I2C_TPS6507X_TS_H */
diff --git a/include/linux/integrity.h b/include/linux/integrity.h
new file mode 100644
index 00000000..a0c41256
--- /dev/null
+++ b/include/linux/integrity.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2009 IBM Corporation
+ * Author: Mimi Zohar <zohar@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, version 2 of the License.
+ */
+
+#ifndef _LINUX_INTEGRITY_H
+#define _LINUX_INTEGRITY_H
+
+#include <linux/fs.h>
+
+enum integrity_status {
+	INTEGRITY_PASS = 0,
+	INTEGRITY_FAIL,
+	INTEGRITY_NOLABEL,
+	INTEGRITY_NOXATTRS,
+	INTEGRITY_UNKNOWN,
+};
+
+/* List of EVM protected security xattrs */
+#ifdef CONFIG_INTEGRITY
+extern int integrity_inode_alloc(struct inode *inode);
+extern void integrity_inode_free(struct inode *inode);
+
+#else
+static inline int integrity_inode_alloc(struct inode *inode)
+{
+	return 0;
+}
+
+static inline void integrity_inode_free(struct inode *inode)
+{
+	return;
+}
+#endif /* CONFIG_INTEGRITY_H */
+#endif /* _LINUX_INTEGRITY_H */
diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h
new file mode 100644
index 00000000..e6ca56de
--- /dev/null
+++ b/include/linux/intel-iommu.h
@@ -0,0 +1,366 @@
+/*
+ * Copyright (c) 2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * Copyright (C) 2006-2008 Intel Corporation
+ * Author: Ashok Raj <ashok.raj@intel.com>
+ * Author: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
+ */
+
+#ifndef _INTEL_IOMMU_H_
+#define _INTEL_IOMMU_H_
+
+#include <linux/types.h>
+#include <linux/iova.h>
+#include <linux/io.h>
+#include <linux/dma_remapping.h>
+#include <asm/cacheflush.h>
+#include <asm/iommu.h>
+
+/*
+ * Intel IOMMU register specification per version 1.0 public spec.
+ */
+
+#define	DMAR_VER_REG	0x0	/* Arch version supported by this IOMMU */
+#define	DMAR_CAP_REG	0x8	/* Hardware supported capabilities */
+#define	DMAR_ECAP_REG	0x10	/* Extended capabilities supported */
+#define	DMAR_GCMD_REG	0x18	/* Global command register */
+#define	DMAR_GSTS_REG	0x1c	/* Global status register */
+#define	DMAR_RTADDR_REG	0x20	/* Root entry table */
+#define	DMAR_CCMD_REG	0x28	/* Context command reg */
+#define	DMAR_FSTS_REG	0x34	/* Fault Status register */
+#define	DMAR_FECTL_REG	0x38	/* Fault control register */
+#define	DMAR_FEDATA_REG	0x3c	/* Fault event interrupt data register */
+#define	DMAR_FEADDR_REG	0x40	/* Fault event interrupt addr register */
+#define	DMAR_FEUADDR_REG 0x44	/* Upper address register */
+#define	DMAR_AFLOG_REG	0x58	/* Advanced Fault control */
+#define	DMAR_PMEN_REG	0x64	/* Enable Protected Memory Region */
+#define	DMAR_PLMBASE_REG 0x68	/* PMRR Low addr */
+#define	DMAR_PLMLIMIT_REG 0x6c	/* PMRR low limit */
+#define	DMAR_PHMBASE_REG 0x70	/* pmrr high base addr */
+#define	DMAR_PHMLIMIT_REG 0x78	/* pmrr high limit */
+#define DMAR_IQH_REG	0x80	/* Invalidation queue head register */
+#define DMAR_IQT_REG	0x88	/* Invalidation queue tail register */
+#define DMAR_IQ_SHIFT	4	/* Invalidation queue head/tail shift */
+#define DMAR_IQA_REG	0x90	/* Invalidation queue addr register */
+#define DMAR_ICS_REG	0x98	/* Invalidation complete status register */
+#define DMAR_IRTA_REG	0xb8    /* Interrupt remapping table addr register */
+
+#define OFFSET_STRIDE		(9)
+/*
+#define dmar_readl(dmar, reg) readl(dmar + reg)
+#define dmar_readq(dmar, reg) ({ \
+		u32 lo, hi; \
+		lo = readl(dmar + reg); \
+		hi = readl(dmar + reg + 4); \
+		(((u64) hi) << 32) + lo; })
+*/
+static inline u64 dmar_readq(void __iomem *addr)
+{
+	u32 lo, hi;
+	lo = readl(addr);
+	hi = readl(addr + 4);
+	return (((u64) hi) << 32) + lo;
+}
+
+static inline void dmar_writeq(void __iomem *addr, u64 val)
+{
+	writel((u32)val, addr);
+	writel((u32)(val >> 32), addr + 4);
+}
+
+#define DMAR_VER_MAJOR(v)		(((v) & 0xf0) >> 4)
+#define DMAR_VER_MINOR(v)		((v) & 0x0f)
+
+/*
+ * Decoding Capability Register
+ */
+#define cap_read_drain(c)	(((c) >> 55) & 1)
+#define cap_write_drain(c)	(((c) >> 54) & 1)
+#define cap_max_amask_val(c)	(((c) >> 48) & 0x3f)
+#define cap_num_fault_regs(c)	((((c) >> 40) & 0xff) + 1)
+#define cap_pgsel_inv(c)	(((c) >> 39) & 1)
+
+#define cap_super_page_val(c)	(((c) >> 34) & 0xf)
+#define cap_super_offset(c)	(((find_first_bit(&cap_super_page_val(c), 4)) \
+					* OFFSET_STRIDE) + 21)
+
+#define cap_fault_reg_offset(c)	((((c) >> 24) & 0x3ff) * 16)
+#define cap_max_fault_reg_offset(c) \
+	(cap_fault_reg_offset(c) + cap_num_fault_regs(c) * 16)
+
+#define cap_zlr(c)		(((c) >> 22) & 1)
+#define cap_isoch(c)		(((c) >> 23) & 1)
+#define cap_mgaw(c)		((((c) >> 16) & 0x3f) + 1)
+#define cap_sagaw(c)		(((c) >> 8) & 0x1f)
+#define cap_caching_mode(c)	(((c) >> 7) & 1)
+#define cap_phmr(c)		(((c) >> 6) & 1)
+#define cap_plmr(c)		(((c) >> 5) & 1)
+#define cap_rwbf(c)		(((c) >> 4) & 1)
+#define cap_afl(c)		(((c) >> 3) & 1)
+#define cap_ndoms(c)		(((unsigned long)1) << (4 + 2 * ((c) & 0x7)))
+/*
+ * Extended Capability Register
+ */
+
+#define ecap_niotlb_iunits(e)	((((e) >> 24) & 0xff) + 1)
+#define ecap_iotlb_offset(e) 	((((e) >> 8) & 0x3ff) * 16)
+#define ecap_max_iotlb_offset(e) \
+	(ecap_iotlb_offset(e) + ecap_niotlb_iunits(e) * 16)
+#define ecap_coherent(e)	((e) & 0x1)
+#define ecap_qis(e)		((e) & 0x2)
+#define ecap_pass_through(e)	((e >> 6) & 0x1)
+#define ecap_eim_support(e)	((e >> 4) & 0x1)
+#define ecap_ir_support(e)	((e >> 3) & 0x1)
+#define ecap_dev_iotlb_support(e)	(((e) >> 2) & 0x1)
+#define ecap_max_handle_mask(e) ((e >> 20) & 0xf)
+#define ecap_sc_support(e)	((e >> 7) & 0x1) /* Snooping Control */
+
+/* IOTLB_REG */
+#define DMA_TLB_FLUSH_GRANU_OFFSET  60
+#define DMA_TLB_GLOBAL_FLUSH (((u64)1) << 60)
+#define DMA_TLB_DSI_FLUSH (((u64)2) << 60)
+#define DMA_TLB_PSI_FLUSH (((u64)3) << 60)
+#define DMA_TLB_IIRG(type) ((type >> 60) & 7)
+#define DMA_TLB_IAIG(val) (((val) >> 57) & 7)
+#define DMA_TLB_READ_DRAIN (((u64)1) << 49)
+#define DMA_TLB_WRITE_DRAIN (((u64)1) << 48)
+#define DMA_TLB_DID(id)	(((u64)((id) & 0xffff)) << 32)
+#define DMA_TLB_IVT (((u64)1) << 63)
+#define DMA_TLB_IH_NONLEAF (((u64)1) << 6)
+#define DMA_TLB_MAX_SIZE (0x3f)
+
+/* INVALID_DESC */
+#define DMA_CCMD_INVL_GRANU_OFFSET  61
+#define DMA_ID_TLB_GLOBAL_FLUSH	(((u64)1) << 3)
+#define DMA_ID_TLB_DSI_FLUSH	(((u64)2) << 3)
+#define DMA_ID_TLB_PSI_FLUSH	(((u64)3) << 3)
+#define DMA_ID_TLB_READ_DRAIN	(((u64)1) << 7)
+#define DMA_ID_TLB_WRITE_DRAIN	(((u64)1) << 6)
+#define DMA_ID_TLB_DID(id)	(((u64)((id & 0xffff) << 16)))
+#define DMA_ID_TLB_IH_NONLEAF	(((u64)1) << 6)
+#define DMA_ID_TLB_ADDR(addr)	(addr)
+#define DMA_ID_TLB_ADDR_MASK(mask)	(mask)
+
+/* PMEN_REG */
+#define DMA_PMEN_EPM (((u32)1)<<31)
+#define DMA_PMEN_PRS (((u32)1)<<0)
+
+/* GCMD_REG */
+#define DMA_GCMD_TE (((u32)1) << 31)
+#define DMA_GCMD_SRTP (((u32)1) << 30)
+#define DMA_GCMD_SFL (((u32)1) << 29)
+#define DMA_GCMD_EAFL (((u32)1) << 28)
+#define DMA_GCMD_WBF (((u32)1) << 27)
+#define DMA_GCMD_QIE (((u32)1) << 26)
+#define DMA_GCMD_SIRTP (((u32)1) << 24)
+#define DMA_GCMD_IRE (((u32) 1) << 25)
+#define DMA_GCMD_CFI (((u32) 1) << 23)
+
+/* GSTS_REG */
+#define DMA_GSTS_TES (((u32)1) << 31)
+#define DMA_GSTS_RTPS (((u32)1) << 30)
+#define DMA_GSTS_FLS (((u32)1) << 29)
+#define DMA_GSTS_AFLS (((u32)1) << 28)
+#define DMA_GSTS_WBFS (((u32)1) << 27)
+#define DMA_GSTS_QIES (((u32)1) << 26)
+#define DMA_GSTS_IRTPS (((u32)1) << 24)
+#define DMA_GSTS_IRES (((u32)1) << 25)
+#define DMA_GSTS_CFIS (((u32)1) << 23)
+
+/* CCMD_REG */
+#define DMA_CCMD_ICC (((u64)1) << 63)
+#define DMA_CCMD_GLOBAL_INVL (((u64)1) << 61)
+#define DMA_CCMD_DOMAIN_INVL (((u64)2) << 61)
+#define DMA_CCMD_DEVICE_INVL (((u64)3) << 61)
+#define DMA_CCMD_FM(m) (((u64)((m) & 0x3)) << 32)
+#define DMA_CCMD_MASK_NOBIT 0
+#define DMA_CCMD_MASK_1BIT 1
+#define DMA_CCMD_MASK_2BIT 2
+#define DMA_CCMD_MASK_3BIT 3
+#define DMA_CCMD_SID(s) (((u64)((s) & 0xffff)) << 16)
+#define DMA_CCMD_DID(d) ((u64)((d) & 0xffff))
+
+/* FECTL_REG */
+#define DMA_FECTL_IM (((u32)1) << 31)
+
+/* FSTS_REG */
+#define DMA_FSTS_PPF ((u32)2)
+#define DMA_FSTS_PFO ((u32)1)
+#define DMA_FSTS_IQE (1 << 4)
+#define DMA_FSTS_ICE (1 << 5)
+#define DMA_FSTS_ITE (1 << 6)
+#define dma_fsts_fault_record_index(s) (((s) >> 8) & 0xff)
+
+/* FRCD_REG, 32 bits access */
+#define DMA_FRCD_F (((u32)1) << 31)
+#define dma_frcd_type(d) ((d >> 30) & 1)
+#define dma_frcd_fault_reason(c) (c & 0xff)
+#define dma_frcd_source_id(c) (c & 0xffff)
+/* low 64 bit */
+#define dma_frcd_page_addr(d) (d & (((u64)-1) << PAGE_SHIFT))
+
+#define IOMMU_WAIT_OP(iommu, offset, op, cond, sts)			\
+do {									\
+	cycles_t start_time = get_cycles();				\
+	while (1) {							\
+		sts = op(iommu->reg + offset);				\
+		if (cond)						\
+			break;						\
+		if (DMAR_OPERATION_TIMEOUT < (get_cycles() - start_time))\
+			panic("DMAR hardware is malfunctioning\n");	\
+		cpu_relax();						\
+	}								\
+} while (0)
+
+#define QI_LENGTH	256	/* queue length */
+
+enum {
+	QI_FREE,
+	QI_IN_USE,
+	QI_DONE,
+	QI_ABORT
+};
+
+#define QI_CC_TYPE		0x1
+#define QI_IOTLB_TYPE		0x2
+#define QI_DIOTLB_TYPE		0x3
+#define QI_IEC_TYPE		0x4
+#define QI_IWD_TYPE		0x5
+
+#define QI_IEC_SELECTIVE	(((u64)1) << 4)
+#define QI_IEC_IIDEX(idx)	(((u64)(idx & 0xffff) << 32))
+#define QI_IEC_IM(m)		(((u64)(m & 0x1f) << 27))
+
+#define QI_IWD_STATUS_DATA(d)	(((u64)d) << 32)
+#define QI_IWD_STATUS_WRITE	(((u64)1) << 5)
+
+#define QI_IOTLB_DID(did) 	(((u64)did) << 16)
+#define QI_IOTLB_DR(dr) 	(((u64)dr) << 7)
+#define QI_IOTLB_DW(dw) 	(((u64)dw) << 6)
+#define QI_IOTLB_GRAN(gran) 	(((u64)gran) >> (DMA_TLB_FLUSH_GRANU_OFFSET-4))
+#define QI_IOTLB_ADDR(addr)	(((u64)addr) & VTD_PAGE_MASK)
+#define QI_IOTLB_IH(ih)		(((u64)ih) << 6)
+#define QI_IOTLB_AM(am)		(((u8)am))
+
+#define QI_CC_FM(fm)		(((u64)fm) << 48)
+#define QI_CC_SID(sid)		(((u64)sid) << 32)
+#define QI_CC_DID(did)		(((u64)did) << 16)
+#define QI_CC_GRAN(gran)	(((u64)gran) >> (DMA_CCMD_INVL_GRANU_OFFSET-4))
+
+#define QI_DEV_IOTLB_SID(sid)	((u64)((sid) & 0xffff) << 32)
+#define QI_DEV_IOTLB_QDEP(qdep)	(((qdep) & 0x1f) << 16)
+#define QI_DEV_IOTLB_ADDR(addr)	((u64)(addr) & VTD_PAGE_MASK)
+#define QI_DEV_IOTLB_SIZE	1
+#define QI_DEV_IOTLB_MAX_INVS	32
+
+struct qi_desc {
+	u64 low, high;
+};
+
+struct q_inval {
+	raw_spinlock_t  q_lock;
+	struct qi_desc  *desc;          /* invalidation queue */
+	int             *desc_status;   /* desc status */
+	int             free_head;      /* first free entry */
+	int             free_tail;      /* last free entry */
+	int             free_cnt;
+};
+
+#ifdef CONFIG_IRQ_REMAP
+/* 1MB - maximum possible interrupt remapping table size */
+#define INTR_REMAP_PAGE_ORDER	8
+#define INTR_REMAP_TABLE_REG_SIZE	0xf
+
+#define INTR_REMAP_TABLE_ENTRIES	65536
+
+struct ir_table {
+	struct irte *base;
+};
+#endif
+
+struct iommu_flush {
+	void (*flush_context)(struct intel_iommu *iommu, u16 did, u16 sid,
+			      u8 fm, u64 type);
+	void (*flush_iotlb)(struct intel_iommu *iommu, u16 did, u64 addr,
+			    unsigned int size_order, u64 type);
+};
+
+enum {
+	SR_DMAR_FECTL_REG,
+	SR_DMAR_FEDATA_REG,
+	SR_DMAR_FEADDR_REG,
+	SR_DMAR_FEUADDR_REG,
+	MAX_SR_DMAR_REGS
+};
+
+struct intel_iommu {
+	void __iomem	*reg; /* Pointer to hardware regs, virtual addr */
+	u64		cap;
+	u64		ecap;
+	u32		gcmd; /* Holds TE, EAFL. Don't need SRTP, SFL, WBF */
+	raw_spinlock_t	register_lock; /* protect register handling */
+	int		seq_id;	/* sequence id of the iommu */
+	int		agaw; /* agaw of this iommu */
+	int		msagaw; /* max sagaw of this iommu */
+	unsigned int 	irq;
+	unsigned char 	name[13];    /* Device Name */
+
+#ifdef CONFIG_INTEL_IOMMU
+	unsigned long 	*domain_ids; /* bitmap of domains */
+	struct dmar_domain **domains; /* ptr to domains */
+	spinlock_t	lock; /* protect context, domain ids */
+	struct root_entry *root_entry; /* virtual address */
+
+	struct iommu_flush flush;
+#endif
+	struct q_inval  *qi;            /* Queued invalidation info */
+	u32 *iommu_state; /* Store iommu states between suspend and resume.*/
+
+#ifdef CONFIG_IRQ_REMAP
+	struct ir_table *ir_table;	/* Interrupt remapping info */
+#endif
+	int		node;
+};
+
+static inline void __iommu_flush_cache(
+	struct intel_iommu *iommu, void *addr, int size)
+{
+	if (!ecap_coherent(iommu->ecap))
+		clflush_cache_range(addr, size);
+}
+
+extern struct dmar_drhd_unit * dmar_find_matched_drhd_unit(struct pci_dev *dev);
+extern int dmar_find_matched_atsr_unit(struct pci_dev *dev);
+
+extern int alloc_iommu(struct dmar_drhd_unit *drhd);
+extern void free_iommu(struct intel_iommu *iommu);
+extern int dmar_enable_qi(struct intel_iommu *iommu);
+extern void dmar_disable_qi(struct intel_iommu *iommu);
+extern int dmar_reenable_qi(struct intel_iommu *iommu);
+extern void qi_global_iec(struct intel_iommu *iommu);
+
+extern void qi_flush_context(struct intel_iommu *iommu, u16 did, u16 sid,
+			     u8 fm, u64 type);
+extern void qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr,
+			  unsigned int size_order, u64 type);
+extern void qi_flush_dev_iotlb(struct intel_iommu *iommu, u16 sid, u16 qdep,
+			       u64 addr, unsigned mask);
+
+extern int qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu);
+
+extern int dmar_ir_support(void);
+
+#endif
diff --git a/include/linux/intel_mid_dma.h b/include/linux/intel_mid_dma.h
new file mode 100644
index 00000000..10496bd2
--- /dev/null
+++ b/include/linux/intel_mid_dma.h
@@ -0,0 +1,76 @@
+/*
+ *  intel_mid_dma.h - Intel MID DMA Drivers
+ *
+ *  Copyright (C) 2008-10 Intel Corp
+ *  Author: Vinod Koul <vinod.koul@intel.com>
+ *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *
+ */
+#ifndef __INTEL_MID_DMA_H__
+#define __INTEL_MID_DMA_H__
+
+#include <linux/dmaengine.h>
+
+#define DMA_PREP_CIRCULAR_LIST		(1 << 10)
+
+/*DMA mode configurations*/
+enum intel_mid_dma_mode {
+	LNW_DMA_PER_TO_MEM = 0, /*periphral to memory configuration*/
+	LNW_DMA_MEM_TO_PER,	/*memory to periphral configuration*/
+	LNW_DMA_MEM_TO_MEM,	/*mem to mem confg (testing only)*/
+};
+
+/*DMA handshaking*/
+enum intel_mid_dma_hs_mode {
+	LNW_DMA_HW_HS = 0,	/*HW Handshaking only*/
+	LNW_DMA_SW_HS = 1,	/*SW Handshaking not recommended*/
+};
+
+/*Burst size configuration*/
+enum intel_mid_dma_msize {
+	LNW_DMA_MSIZE_1 = 0x0,
+	LNW_DMA_MSIZE_4 = 0x1,
+	LNW_DMA_MSIZE_8 = 0x2,
+	LNW_DMA_MSIZE_16 = 0x3,
+	LNW_DMA_MSIZE_32 = 0x4,
+	LNW_DMA_MSIZE_64 = 0x5,
+};
+
+/**
+ * struct intel_mid_dma_slave - DMA slave structure
+ *
+ * @dirn: DMA trf direction
+ * @src_width: tx register width
+ * @dst_width: rx register width
+ * @hs_mode: HW/SW handshaking mode
+ * @cfg_mode: DMA data transfer mode (per-per/mem-per/mem-mem)
+ * @src_msize: Source DMA burst size
+ * @dst_msize: Dst DMA burst size
+ * @per_addr: Periphral address
+ * @device_instance: DMA peripheral device instance, we can have multiple
+ *		peripheral device connected to single DMAC
+ */
+struct intel_mid_dma_slave {
+	enum intel_mid_dma_hs_mode	hs_mode;  /*handshaking*/
+	enum intel_mid_dma_mode		cfg_mode; /*mode configuration*/
+	unsigned int		device_instance; /*0, 1 for periphral instance*/
+	struct dma_slave_config		dma_slave;
+};
+
+#endif /*__INTEL_MID_DMA_H__*/
diff --git a/include/linux/intel_pmic_gpio.h b/include/linux/intel_pmic_gpio.h
new file mode 100644
index 00000000..920109a2
--- /dev/null
+++ b/include/linux/intel_pmic_gpio.h
@@ -0,0 +1,15 @@
+#ifndef LINUX_INTEL_PMIC_H
+#define LINUX_INTEL_PMIC_H
+
+struct intel_pmic_gpio_platform_data {
+	/* the first IRQ of the chip */
+	unsigned	irq_base;
+	/* number assigned to the first GPIO */
+	unsigned	gpio_base;
+	/* sram address for gpiointr register, the langwell chip will map
+	 * the PMIC spi GPIO expander's GPIOINTR register in sram.
+	 */
+	unsigned	gpiointr;
+};
+
+#endif
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
new file mode 100644
index 00000000..2aea5d22
--- /dev/null
+++ b/include/linux/interrupt.h
@@ -0,0 +1,703 @@
+/* interrupt.h */
+#ifndef _LINUX_INTERRUPT_H
+#define _LINUX_INTERRUPT_H
+
+#include <linux/kernel.h>
+#include <linux/linkage.h>
+#include <linux/bitops.h>
+#include <linux/preempt.h>
+#include <linux/cpumask.h>
+#include <linux/irqreturn.h>
+#include <linux/irqnr.h>
+#include <linux/hardirq.h>
+#include <linux/irqflags.h>
+#include <linux/smp.h>
+#include <linux/percpu.h>
+#include <linux/hrtimer.h>
+#include <linux/kref.h>
+#include <linux/workqueue.h>
+
+#include <linux/atomic.h>
+#include <asm/ptrace.h>
+
+/*
+ * These correspond to the IORESOURCE_IRQ_* defines in
+ * linux/ioport.h to select the interrupt line behaviour.  When
+ * requesting an interrupt without specifying a IRQF_TRIGGER, the
+ * setting should be assumed to be "as already configured", which
+ * may be as per machine or firmware initialisation.
+ */
+#define IRQF_TRIGGER_NONE	0x00000000
+#define IRQF_TRIGGER_RISING	0x00000001
+#define IRQF_TRIGGER_FALLING	0x00000002
+#define IRQF_TRIGGER_HIGH	0x00000004
+#define IRQF_TRIGGER_LOW	0x00000008
+#define IRQF_TRIGGER_MASK	(IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW | \
+				 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)
+#define IRQF_TRIGGER_PROBE	0x00000010
+
+/*
+ * These flags used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * IRQF_DISABLED - keep irqs disabled when calling the action handler.
+ *                 DEPRECATED. This flag is a NOOP and scheduled to be removed
+ * IRQF_SAMPLE_RANDOM - irq is used to feed the random generator
+ * IRQF_SHARED - allow sharing the irq among several devices
+ * IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to occur
+ * IRQF_TIMER - Flag to mark this interrupt as timer interrupt
+ * IRQF_PERCPU - Interrupt is per cpu
+ * IRQF_NOBALANCING - Flag to exclude this interrupt from irq balancing
+ * IRQF_IRQPOLL - Interrupt is used for polling (only the interrupt that is
+ *                registered first in an shared interrupt is considered for
+ *                performance reasons)
+ * IRQF_ONESHOT - Interrupt is not reenabled after the hardirq handler finished.
+ *                Used by threaded interrupts which need to keep the
+ *                irq line disabled until the threaded handler has been run.
+ * IRQF_NO_SUSPEND - Do not disable this IRQ during suspend
+ * IRQF_FORCE_RESUME - Force enable it on resume even if IRQF_NO_SUSPEND is set
+ * IRQF_NO_THREAD - Interrupt cannot be threaded
+ * IRQF_EARLY_RESUME - Resume IRQ early during syscore instead of at device
+ *                resume time.
+ */
+#define IRQF_DISABLED		0x00000020
+#define IRQF_SAMPLE_RANDOM	0x00000040
+#define IRQF_SHARED		0x00000080
+#define IRQF_PROBE_SHARED	0x00000100
+#define __IRQF_TIMER		0x00000200
+#define IRQF_PERCPU		0x00000400
+#define IRQF_NOBALANCING	0x00000800
+#define IRQF_IRQPOLL		0x00001000
+#define IRQF_ONESHOT		0x00002000
+#define IRQF_NO_SUSPEND		0x00004000
+#define IRQF_FORCE_RESUME	0x00008000
+#define IRQF_NO_THREAD		0x00010000
+#define IRQF_EARLY_RESUME	0x00020000
+
+#define IRQF_TIMER		(__IRQF_TIMER | IRQF_NO_SUSPEND | IRQF_NO_THREAD)
+
+/*
+ * These values can be returned by request_any_context_irq() and
+ * describe the context the interrupt will be run in.
+ *
+ * IRQC_IS_HARDIRQ - interrupt runs in hardirq context
+ * IRQC_IS_NESTED - interrupt runs in a nested threaded context
+ */
+enum {
+	IRQC_IS_HARDIRQ	= 0,
+	IRQC_IS_NESTED,
+};
+
+typedef irqreturn_t (*irq_handler_t)(int, void *);
+
+/**
+ * struct irqaction - per interrupt action descriptor
+ * @handler:	interrupt handler function
+ * @flags:	flags (see IRQF_* above)
+ * @name:	name of the device
+ * @dev_id:	cookie to identify the device
+ * @percpu_dev_id:	cookie to identify the device
+ * @next:	pointer to the next irqaction for shared interrupts
+ * @irq:	interrupt number
+ * @dir:	pointer to the proc/irq/NN/name entry
+ * @thread_fn:	interrupt handler function for threaded interrupts
+ * @thread:	thread pointer for threaded interrupts
+ * @thread_flags:	flags related to @thread
+ * @thread_mask:	bitmask for keeping track of @thread activity
+ */
+struct irqaction {
+	irq_handler_t		handler;
+	unsigned long		flags;
+	void			*dev_id;
+	void __percpu		*percpu_dev_id;
+	struct irqaction	*next;
+	int			irq;
+	irq_handler_t		thread_fn;
+	struct task_struct	*thread;
+	unsigned long		thread_flags;
+	unsigned long		thread_mask;
+	const char		*name;
+	struct proc_dir_entry	*dir;
+} ____cacheline_internodealigned_in_smp;
+
+extern irqreturn_t no_action(int cpl, void *dev_id);
+
+#ifdef CONFIG_GENERIC_HARDIRQS
+extern int __must_check
+request_threaded_irq(unsigned int irq, irq_handler_t handler,
+		     irq_handler_t thread_fn,
+		     unsigned long flags, const char *name, void *dev);
+
+static inline int __must_check
+request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags,
+	    const char *name, void *dev)
+{
+	return request_threaded_irq(irq, handler, NULL, flags, name, dev);
+}
+
+extern int __must_check
+request_any_context_irq(unsigned int irq, irq_handler_t handler,
+			unsigned long flags, const char *name, void *dev_id);
+
+extern int __must_check
+request_percpu_irq(unsigned int irq, irq_handler_t handler,
+		   const char *devname, void __percpu *percpu_dev_id);
+
+extern void exit_irq_thread(void);
+#else
+
+extern int __must_check
+request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags,
+	    const char *name, void *dev);
+
+/*
+ * Special function to avoid ifdeffery in kernel/irq/devres.c which
+ * gets magically built by GENERIC_HARDIRQS=n architectures (sparc,
+ * m68k). I really love these $@%#!* obvious Makefile references:
+ * ../../../kernel/irq/devres.o
+ */
+static inline int __must_check
+request_threaded_irq(unsigned int irq, irq_handler_t handler,
+		     irq_handler_t thread_fn,
+		     unsigned long flags, const char *name, void *dev)
+{
+	return request_irq(irq, handler, flags, name, dev);
+}
+
+static inline int __must_check
+request_any_context_irq(unsigned int irq, irq_handler_t handler,
+			unsigned long flags, const char *name, void *dev_id)
+{
+	return request_irq(irq, handler, flags, name, dev_id);
+}
+
+static inline int __must_check
+request_percpu_irq(unsigned int irq, irq_handler_t handler,
+		   const char *devname, void __percpu *percpu_dev_id)
+{
+	return request_irq(irq, handler, 0, devname, percpu_dev_id);
+}
+
+static inline void exit_irq_thread(void) { }
+#endif
+
+extern void free_irq(unsigned int, void *);
+extern void free_percpu_irq(unsigned int, void __percpu *);
+
+struct device;
+
+extern int __must_check
+devm_request_threaded_irq(struct device *dev, unsigned int irq,
+			  irq_handler_t handler, irq_handler_t thread_fn,
+			  unsigned long irqflags, const char *devname,
+			  void *dev_id);
+
+static inline int __must_check
+devm_request_irq(struct device *dev, unsigned int irq, irq_handler_t handler,
+		 unsigned long irqflags, const char *devname, void *dev_id)
+{
+	return devm_request_threaded_irq(dev, irq, handler, NULL, irqflags,
+					 devname, dev_id);
+}
+
+extern void devm_free_irq(struct device *dev, unsigned int irq, void *dev_id);
+
+/*
+ * On lockdep we dont want to enable hardirqs in hardirq
+ * context. Use local_irq_enable_in_hardirq() to annotate
+ * kernel code that has to do this nevertheless (pretty much
+ * the only valid case is for old/broken hardware that is
+ * insanely slow).
+ *
+ * NOTE: in theory this might break fragile code that relies
+ * on hardirq delivery - in practice we dont seem to have such
+ * places left. So the only effect should be slightly increased
+ * irqs-off latencies.
+ */
+#ifdef CONFIG_LOCKDEP
+# define local_irq_enable_in_hardirq()	do { } while (0)
+#else
+# define local_irq_enable_in_hardirq()	local_irq_enable()
+#endif
+
+extern void disable_irq_nosync(unsigned int irq);
+extern void disable_irq(unsigned int irq);
+extern void disable_percpu_irq(unsigned int irq);
+extern void enable_irq(unsigned int irq);
+extern void enable_percpu_irq(unsigned int irq, unsigned int type);
+
+/* The following three functions are for the core kernel use only. */
+#ifdef CONFIG_GENERIC_HARDIRQS
+extern void suspend_device_irqs(void);
+extern void resume_device_irqs(void);
+#ifdef CONFIG_PM_SLEEP
+extern int check_wakeup_irqs(void);
+#else
+static inline int check_wakeup_irqs(void) { return 0; }
+#endif
+#else
+static inline void suspend_device_irqs(void) { };
+static inline void resume_device_irqs(void) { };
+static inline int check_wakeup_irqs(void) { return 0; }
+#endif
+
+#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
+
+extern cpumask_var_t irq_default_affinity;
+
+extern int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask);
+extern int irq_can_set_affinity(unsigned int irq);
+extern int irq_select_affinity(unsigned int irq);
+
+extern int irq_set_affinity_hint(unsigned int irq, const struct cpumask *m);
+
+/**
+ * struct irq_affinity_notify - context for notification of IRQ affinity changes
+ * @irq:		Interrupt to which notification applies
+ * @kref:		Reference count, for internal use
+ * @work:		Work item, for internal use
+ * @notify:		Function to be called on change.  This will be
+ *			called in process context.
+ * @release:		Function to be called on release.  This will be
+ *			called in process context.  Once registered, the
+ *			structure must only be freed when this function is
+ *			called or later.
+ */
+struct irq_affinity_notify {
+	unsigned int irq;
+	struct kref kref;
+	struct work_struct work;
+	void (*notify)(struct irq_affinity_notify *, const cpumask_t *mask);
+	void (*release)(struct kref *ref);
+};
+
+extern int
+irq_set_affinity_notifier(unsigned int irq, struct irq_affinity_notify *notify);
+
+static inline void irq_run_affinity_notifiers(void)
+{
+	flush_scheduled_work();
+}
+
+#else /* CONFIG_SMP */
+
+static inline int irq_set_affinity(unsigned int irq, const struct cpumask *m)
+{
+	return -EINVAL;
+}
+
+static inline int irq_can_set_affinity(unsigned int irq)
+{
+	return 0;
+}
+
+static inline int irq_select_affinity(unsigned int irq)  { return 0; }
+
+static inline int irq_set_affinity_hint(unsigned int irq,
+					const struct cpumask *m)
+{
+	return -EINVAL;
+}
+#endif /* CONFIG_SMP && CONFIG_GENERIC_HARDIRQS */
+
+#ifdef CONFIG_GENERIC_HARDIRQS
+/*
+ * Special lockdep variants of irq disabling/enabling.
+ * These should be used for locking constructs that
+ * know that a particular irq context which is disabled,
+ * and which is the only irq-context user of a lock,
+ * that it's safe to take the lock in the irq-disabled
+ * section without disabling hardirqs.
+ *
+ * On !CONFIG_LOCKDEP they are equivalent to the normal
+ * irq disable/enable methods.
+ */
+static inline void disable_irq_nosync_lockdep(unsigned int irq)
+{
+	disable_irq_nosync(irq);
+#ifdef CONFIG_LOCKDEP
+	local_irq_disable();
+#endif
+}
+
+static inline void disable_irq_nosync_lockdep_irqsave(unsigned int irq, unsigned long *flags)
+{
+	disable_irq_nosync(irq);
+#ifdef CONFIG_LOCKDEP
+	local_irq_save(*flags);
+#endif
+}
+
+static inline void disable_irq_lockdep(unsigned int irq)
+{
+	disable_irq(irq);
+#ifdef CONFIG_LOCKDEP
+	local_irq_disable();
+#endif
+}
+
+static inline void enable_irq_lockdep(unsigned int irq)
+{
+#ifdef CONFIG_LOCKDEP
+	local_irq_enable();
+#endif
+	enable_irq(irq);
+}
+
+static inline void enable_irq_lockdep_irqrestore(unsigned int irq, unsigned long *flags)
+{
+#ifdef CONFIG_LOCKDEP
+	local_irq_restore(*flags);
+#endif
+	enable_irq(irq);
+}
+
+/* IRQ wakeup (PM) control: */
+extern int irq_set_irq_wake(unsigned int irq, unsigned int on);
+
+static inline int enable_irq_wake(unsigned int irq)
+{
+	return irq_set_irq_wake(irq, 1);
+}
+
+static inline int disable_irq_wake(unsigned int irq)
+{
+	return irq_set_irq_wake(irq, 0);
+}
+
+#else /* !CONFIG_GENERIC_HARDIRQS */
+/*
+ * NOTE: non-genirq architectures, if they want to support the lock
+ * validator need to define the methods below in their asm/irq.h
+ * files, under an #ifdef CONFIG_LOCKDEP section.
+ */
+#ifndef CONFIG_LOCKDEP
+#  define disable_irq_nosync_lockdep(irq)	disable_irq_nosync(irq)
+#  define disable_irq_nosync_lockdep_irqsave(irq, flags) \
+						disable_irq_nosync(irq)
+#  define disable_irq_lockdep(irq)		disable_irq(irq)
+#  define enable_irq_lockdep(irq)		enable_irq(irq)
+#  define enable_irq_lockdep_irqrestore(irq, flags) \
+						enable_irq(irq)
+# endif
+
+static inline int enable_irq_wake(unsigned int irq)
+{
+	return 0;
+}
+
+static inline int disable_irq_wake(unsigned int irq)
+{
+	return 0;
+}
+#endif /* CONFIG_GENERIC_HARDIRQS */
+
+
+#ifdef CONFIG_IRQ_FORCED_THREADING
+extern bool force_irqthreads;
+#else
+#define force_irqthreads	(0)
+#endif
+
+#ifndef __ARCH_SET_SOFTIRQ_PENDING
+#define set_softirq_pending(x) (local_softirq_pending() = (x))
+#define or_softirq_pending(x)  (local_softirq_pending() |= (x))
+#endif
+
+/* Some architectures might implement lazy enabling/disabling of
+ * interrupts. In some cases, such as stop_machine, we might want
+ * to ensure that after a local_irq_disable(), interrupts have
+ * really been disabled in hardware. Such architectures need to
+ * implement the following hook.
+ */
+#ifndef hard_irq_disable
+#define hard_irq_disable()	do { } while(0)
+#endif
+
+/* PLEASE, avoid to allocate new softirqs, if you need not _really_ high
+   frequency threaded job scheduling. For almost all the purposes
+   tasklets are more than enough. F.e. all serial device BHs et
+   al. should be converted to tasklets, not to softirqs.
+ */
+
+enum
+{
+	HI_SOFTIRQ=0,
+	TIMER_SOFTIRQ,
+	NET_TX_SOFTIRQ,
+	NET_RX_SOFTIRQ,
+	BLOCK_SOFTIRQ,
+	BLOCK_IOPOLL_SOFTIRQ,
+	TASKLET_SOFTIRQ,
+	SCHED_SOFTIRQ,
+	HRTIMER_SOFTIRQ,
+	RCU_SOFTIRQ,    /* Preferable RCU should always be the last softirq */
+
+	NR_SOFTIRQS
+};
+
+/* map softirq index to softirq name. update 'softirq_to_name' in
+ * kernel/softirq.c when adding a new softirq.
+ */
+extern char *softirq_to_name[NR_SOFTIRQS];
+
+/* softirq mask and active fields moved to irq_cpustat_t in
+ * asm/hardirq.h to get better cache usage.  KAO
+ */
+
+struct softirq_action
+{
+	void	(*action)(struct softirq_action *);
+};
+
+asmlinkage void do_softirq(void);
+asmlinkage void __do_softirq(void);
+extern void open_softirq(int nr, void (*action)(struct softirq_action *));
+extern void softirq_init(void);
+extern void __raise_softirq_irqoff(unsigned int nr);
+
+extern void raise_softirq_irqoff(unsigned int nr);
+extern void raise_softirq(unsigned int nr);
+
+/* This is the worklist that queues up per-cpu softirq work.
+ *
+ * send_remote_sendirq() adds work to these lists, and
+ * the softirq handler itself dequeues from them.  The queues
+ * are protected by disabling local cpu interrupts and they must
+ * only be accessed by the local cpu that they are for.
+ */
+DECLARE_PER_CPU(struct list_head [NR_SOFTIRQS], softirq_work_list);
+
+DECLARE_PER_CPU(struct task_struct *, ksoftirqd);
+
+static inline struct task_struct *this_cpu_ksoftirqd(void)
+{
+	return this_cpu_read(ksoftirqd);
+}
+
+/* Try to send a softirq to a remote cpu.  If this cannot be done, the
+ * work will be queued to the local cpu.
+ */
+extern void send_remote_softirq(struct call_single_data *cp, int cpu, int softirq);
+
+/* Like send_remote_softirq(), but the caller must disable local cpu interrupts
+ * and compute the current cpu, passed in as 'this_cpu'.
+ */
+extern void __send_remote_softirq(struct call_single_data *cp, int cpu,
+				  int this_cpu, int softirq);
+
+/* Tasklets --- multithreaded analogue of BHs.
+
+   Main feature differing them of generic softirqs: tasklet
+   is running only on one CPU simultaneously.
+
+   Main feature differing them of BHs: different tasklets
+   may be run simultaneously on different CPUs.
+
+   Properties:
+   * If tasklet_schedule() is called, then tasklet is guaranteed
+     to be executed on some cpu at least once after this.
+   * If the tasklet is already scheduled, but its execution is still not
+     started, it will be executed only once.
+   * If this tasklet is already running on another CPU (or schedule is called
+     from tasklet itself), it is rescheduled for later.
+   * Tasklet is strictly serialized wrt itself, but not
+     wrt another tasklets. If client needs some intertask synchronization,
+     he makes it with spinlocks.
+ */
+
+struct tasklet_struct
+{
+	struct tasklet_struct *next;
+	unsigned long state;
+	atomic_t count;
+	void (*func)(unsigned long);
+	unsigned long data;
+};
+
+#define DECLARE_TASKLET(name, func, data) \
+struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(0), func, data }
+
+#define DECLARE_TASKLET_DISABLED(name, func, data) \
+struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(1), func, data }
+
+
+enum
+{
+	TASKLET_STATE_SCHED,	/* Tasklet is scheduled for execution */
+	TASKLET_STATE_RUN	/* Tasklet is running (SMP only) */
+};
+
+#ifdef CONFIG_SMP
+static inline int tasklet_trylock(struct tasklet_struct *t)
+{
+	return !test_and_set_bit(TASKLET_STATE_RUN, &(t)->state);
+}
+
+static inline void tasklet_unlock(struct tasklet_struct *t)
+{
+	smp_mb__before_clear_bit(); 
+	clear_bit(TASKLET_STATE_RUN, &(t)->state);
+}
+
+static inline void tasklet_unlock_wait(struct tasklet_struct *t)
+{
+	while (test_bit(TASKLET_STATE_RUN, &(t)->state)) { barrier(); }
+}
+#else
+#define tasklet_trylock(t) 1
+#define tasklet_unlock_wait(t) do { } while (0)
+#define tasklet_unlock(t) do { } while (0)
+#endif
+
+extern void __tasklet_schedule(struct tasklet_struct *t);
+
+static inline void tasklet_schedule(struct tasklet_struct *t)
+{
+	if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
+		__tasklet_schedule(t);
+}
+
+extern void __tasklet_hi_schedule(struct tasklet_struct *t);
+
+static inline void tasklet_hi_schedule(struct tasklet_struct *t)
+{
+	if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
+		__tasklet_hi_schedule(t);
+}
+
+extern void __tasklet_hi_schedule_first(struct tasklet_struct *t);
+
+/*
+ * This version avoids touching any other tasklets. Needed for kmemcheck
+ * in order not to take any page faults while enqueueing this tasklet;
+ * consider VERY carefully whether you really need this or
+ * tasklet_hi_schedule()...
+ */
+static inline void tasklet_hi_schedule_first(struct tasklet_struct *t)
+{
+	if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
+		__tasklet_hi_schedule_first(t);
+}
+
+
+static inline void tasklet_disable_nosync(struct tasklet_struct *t)
+{
+	atomic_inc(&t->count);
+	smp_mb__after_atomic_inc();
+}
+
+static inline void tasklet_disable(struct tasklet_struct *t)
+{
+	tasklet_disable_nosync(t);
+	tasklet_unlock_wait(t);
+	smp_mb();
+}
+
+static inline void tasklet_enable(struct tasklet_struct *t)
+{
+	smp_mb__before_atomic_dec();
+	atomic_dec(&t->count);
+}
+
+static inline void tasklet_hi_enable(struct tasklet_struct *t)
+{
+	smp_mb__before_atomic_dec();
+	atomic_dec(&t->count);
+}
+
+extern void tasklet_kill(struct tasklet_struct *t);
+extern void tasklet_kill_immediate(struct tasklet_struct *t, unsigned int cpu);
+extern void tasklet_init(struct tasklet_struct *t,
+			 void (*func)(unsigned long), unsigned long data);
+
+struct tasklet_hrtimer {
+	struct hrtimer		timer;
+	struct tasklet_struct	tasklet;
+	enum hrtimer_restart	(*function)(struct hrtimer *);
+};
+
+extern void
+tasklet_hrtimer_init(struct tasklet_hrtimer *ttimer,
+		     enum hrtimer_restart (*function)(struct hrtimer *),
+		     clockid_t which_clock, enum hrtimer_mode mode);
+
+static inline
+int tasklet_hrtimer_start(struct tasklet_hrtimer *ttimer, ktime_t time,
+			  const enum hrtimer_mode mode)
+{
+	return hrtimer_start(&ttimer->timer, time, mode);
+}
+
+static inline
+void tasklet_hrtimer_cancel(struct tasklet_hrtimer *ttimer)
+{
+	hrtimer_cancel(&ttimer->timer);
+	tasklet_kill(&ttimer->tasklet);
+}
+
+/*
+ * Autoprobing for irqs:
+ *
+ * probe_irq_on() and probe_irq_off() provide robust primitives
+ * for accurate IRQ probing during kernel initialization.  They are
+ * reasonably simple to use, are not "fooled" by spurious interrupts,
+ * and, unlike other attempts at IRQ probing, they do not get hung on
+ * stuck interrupts (such as unused PS2 mouse interfaces on ASUS boards).
+ *
+ * For reasonably foolproof probing, use them as follows:
+ *
+ * 1. clear and/or mask the device's internal interrupt.
+ * 2. sti();
+ * 3. irqs = probe_irq_on();      // "take over" all unassigned idle IRQs
+ * 4. enable the device and cause it to trigger an interrupt.
+ * 5. wait for the device to interrupt, using non-intrusive polling or a delay.
+ * 6. irq = probe_irq_off(irqs);  // get IRQ number, 0=none, negative=multiple
+ * 7. service the device to clear its pending interrupt.
+ * 8. loop again if paranoia is required.
+ *
+ * probe_irq_on() returns a mask of allocated irq's.
+ *
+ * probe_irq_off() takes the mask as a parameter,
+ * and returns the irq number which occurred,
+ * or zero if none occurred, or a negative irq number
+ * if more than one irq occurred.
+ */
+
+#if defined(CONFIG_GENERIC_HARDIRQS) && !defined(CONFIG_GENERIC_IRQ_PROBE) 
+static inline unsigned long probe_irq_on(void)
+{
+	return 0;
+}
+static inline int probe_irq_off(unsigned long val)
+{
+	return 0;
+}
+static inline unsigned int probe_irq_mask(unsigned long val)
+{
+	return 0;
+}
+#else
+extern unsigned long probe_irq_on(void);	/* returns 0 on failure */
+extern int probe_irq_off(unsigned long);	/* returns 0 or negative on failure */
+extern unsigned int probe_irq_mask(unsigned long);	/* returns mask of ISA interrupts */
+#endif
+
+#ifdef CONFIG_PROC_FS
+/* Initialize /proc/irq/ */
+extern void init_irq_proc(void);
+#else
+static inline void init_irq_proc(void)
+{
+}
+#endif
+
+struct seq_file;
+int show_interrupts(struct seq_file *p, void *v);
+int arch_show_interrupts(struct seq_file *p, int prec);
+
+extern int early_irq_init(void);
+extern int arch_probe_nr_irqs(void);
+extern int arch_early_irq_init(void);
+
+#endif
diff --git a/include/linux/io-mapping.h b/include/linux/io-mapping.h
new file mode 100644
index 00000000..657fab4e
--- /dev/null
+++ b/include/linux/io-mapping.h
@@ -0,0 +1,168 @@
+/*
+ * Copyright © 2008 Keith Packard <keithp@keithp.com>
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _LINUX_IO_MAPPING_H
+#define _LINUX_IO_MAPPING_H
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/bug.h>
+#include <asm/io.h>
+#include <asm/page.h>
+
+/*
+ * The io_mapping mechanism provides an abstraction for mapping
+ * individual pages from an io device to the CPU in an efficient fashion.
+ *
+ * See Documentation/io-mapping.txt
+ */
+
+#ifdef CONFIG_HAVE_ATOMIC_IOMAP
+
+#include <asm/iomap.h>
+
+struct io_mapping {
+	resource_size_t base;
+	unsigned long size;
+	pgprot_t prot;
+};
+
+/*
+ * For small address space machines, mapping large objects
+ * into the kernel virtual space isn't practical. Where
+ * available, use fixmap support to dynamically map pages
+ * of the object at run time.
+ */
+
+static inline struct io_mapping *
+io_mapping_create_wc(resource_size_t base, unsigned long size)
+{
+	struct io_mapping *iomap;
+	pgprot_t prot;
+
+	iomap = kmalloc(sizeof(*iomap), GFP_KERNEL);
+	if (!iomap)
+		goto out_err;
+
+	if (iomap_create_wc(base, size, &prot))
+		goto out_free;
+
+	iomap->base = base;
+	iomap->size = size;
+	iomap->prot = prot;
+	return iomap;
+
+out_free:
+	kfree(iomap);
+out_err:
+	return NULL;
+}
+
+static inline void
+io_mapping_free(struct io_mapping *mapping)
+{
+	iomap_free(mapping->base, mapping->size);
+	kfree(mapping);
+}
+
+/* Atomic map/unmap */
+static inline void __iomem *
+io_mapping_map_atomic_wc(struct io_mapping *mapping,
+			 unsigned long offset)
+{
+	resource_size_t phys_addr;
+	unsigned long pfn;
+
+	BUG_ON(offset >= mapping->size);
+	phys_addr = mapping->base + offset;
+	pfn = (unsigned long) (phys_addr >> PAGE_SHIFT);
+	return iomap_atomic_prot_pfn(pfn, mapping->prot);
+}
+
+static inline void
+io_mapping_unmap_atomic(void __iomem *vaddr)
+{
+	iounmap_atomic(vaddr);
+}
+
+static inline void __iomem *
+io_mapping_map_wc(struct io_mapping *mapping, unsigned long offset)
+{
+	resource_size_t phys_addr;
+
+	BUG_ON(offset >= mapping->size);
+	phys_addr = mapping->base + offset;
+
+	return ioremap_wc(phys_addr, PAGE_SIZE);
+}
+
+static inline void
+io_mapping_unmap(void __iomem *vaddr)
+{
+	iounmap(vaddr);
+}
+
+#else
+
+#include <linux/uaccess.h>
+
+/* this struct isn't actually defined anywhere */
+struct io_mapping;
+
+/* Create the io_mapping object*/
+static inline struct io_mapping *
+io_mapping_create_wc(resource_size_t base, unsigned long size)
+{
+	return (struct io_mapping __force *) ioremap_wc(base, size);
+}
+
+static inline void
+io_mapping_free(struct io_mapping *mapping)
+{
+	iounmap((void __force __iomem *) mapping);
+}
+
+/* Atomic map/unmap */
+static inline void __iomem *
+io_mapping_map_atomic_wc(struct io_mapping *mapping,
+			 unsigned long offset)
+{
+	pagefault_disable();
+	return ((char __force __iomem *) mapping) + offset;
+}
+
+static inline void
+io_mapping_unmap_atomic(void __iomem *vaddr)
+{
+	pagefault_enable();
+}
+
+/* Non-atomic map/unmap */
+static inline void __iomem *
+io_mapping_map_wc(struct io_mapping *mapping, unsigned long offset)
+{
+	return ((char __force __iomem *) mapping) + offset;
+}
+
+static inline void
+io_mapping_unmap(void __iomem *vaddr)
+{
+}
+
+#endif /* HAVE_ATOMIC_IOMAP */
+
+#endif /* _LINUX_IO_MAPPING_H */
diff --git a/include/linux/io.h b/include/linux/io.h
new file mode 100644
index 00000000..7fd2d213
--- /dev/null
+++ b/include/linux/io.h
@@ -0,0 +1,70 @@
+/*
+ * Copyright 2006 PathScale, Inc.  All Rights Reserved.
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#ifndef _LINUX_IO_H
+#define _LINUX_IO_H
+
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/page.h>
+
+struct device;
+
+void __iowrite32_copy(void __iomem *to, const void *from, size_t count);
+void __iowrite64_copy(void __iomem *to, const void *from, size_t count);
+
+#ifdef CONFIG_MMU
+int ioremap_page_range(unsigned long addr, unsigned long end,
+		       phys_addr_t phys_addr, pgprot_t prot);
+#else
+static inline int ioremap_page_range(unsigned long addr, unsigned long end,
+				     phys_addr_t phys_addr, pgprot_t prot)
+{
+	return 0;
+}
+#endif
+
+/*
+ * Managed iomap interface
+ */
+#ifdef CONFIG_HAS_IOPORT
+void __iomem * devm_ioport_map(struct device *dev, unsigned long port,
+			       unsigned int nr);
+void devm_ioport_unmap(struct device *dev, void __iomem *addr);
+#else
+static inline void __iomem *devm_ioport_map(struct device *dev,
+					     unsigned long port,
+					     unsigned int nr)
+{
+	return NULL;
+}
+
+static inline void devm_ioport_unmap(struct device *dev, void __iomem *addr)
+{
+}
+#endif
+
+void __iomem *devm_ioremap(struct device *dev, resource_size_t offset,
+			    unsigned long size);
+void __iomem *devm_ioremap_nocache(struct device *dev, resource_size_t offset,
+				    unsigned long size);
+void devm_iounmap(struct device *dev, void __iomem *addr);
+int check_signature(const volatile void __iomem *io_addr,
+			const unsigned char *signature, int length);
+void devm_ioremap_release(struct device *dev, void *res);
+
+#endif /* _LINUX_IO_H */
diff --git a/include/linux/ioc3.h b/include/linux/ioc3.h
new file mode 100644
index 00000000..38b286e9
--- /dev/null
+++ b/include/linux/ioc3.h
@@ -0,0 +1,93 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2005 Stanislaw Skowronek <skylark@linux-mips.org>
+ */
+
+#ifndef _LINUX_IOC3_H
+#define _LINUX_IOC3_H
+
+#include <asm/sn/ioc3.h>
+
+#define IOC3_MAX_SUBMODULES	32
+
+#define IOC3_CLASS_NONE		0
+#define IOC3_CLASS_BASE_IP27	1
+#define IOC3_CLASS_BASE_IP30	2
+#define IOC3_CLASS_MENET_123	3
+#define IOC3_CLASS_MENET_4	4
+#define IOC3_CLASS_CADDUO	5
+#define IOC3_CLASS_SERIAL	6
+
+/* One of these per IOC3 */
+struct ioc3_driver_data {
+	struct list_head list;
+	int id;				/* IOC3 sequence number */
+	/* PCI mapping */
+	unsigned long pma;		/* physical address */
+	struct ioc3 __iomem *vma;	/* pointer to registers */
+	struct pci_dev *pdev;		/* PCI device */
+	/* IRQ stuff */
+	int dual_irq;			/* set if separate IRQs are used */
+	int irq_io, irq_eth;		/* IRQ numbers */
+	/* GPIO magic */
+	spinlock_t gpio_lock;
+	unsigned int gpdr_shadow;
+	/* NIC identifiers */
+	char nic_part[32];
+	char nic_serial[16];
+	char nic_mac[6];
+	/* submodule set */
+	int class;
+	void *data[IOC3_MAX_SUBMODULES];	/* for submodule use */
+	int active[IOC3_MAX_SUBMODULES];	/* set if probe succeeds */
+	/* is_ir_lock must be held while
+	 * modifying sio_ie values, so
+	 * we can be sure that sio_ie is
+	 * not changing when we read it
+	 * along with sio_ir.
+	 */
+	spinlock_t ir_lock;	/* SIO_IE[SC] mod lock */
+};
+
+/* One per submodule */
+struct ioc3_submodule {
+	char *name;		/* descriptive submodule name */
+	struct module *owner;	/* owning kernel module */
+	int ethernet;		/* set for ethernet drivers */
+	int (*probe) (struct ioc3_submodule *, struct ioc3_driver_data *);
+	int (*remove) (struct ioc3_submodule *, struct ioc3_driver_data *);
+	int id;			/* assigned by IOC3, index for the "data" array */
+	/* IRQ stuff */
+	unsigned int irq_mask;	/* IOC3 IRQ mask, leave clear for Ethernet */
+	int reset_mask;		/* non-zero if you want the ioc3.c module to reset interrupts */
+	int (*intr) (struct ioc3_submodule *, struct ioc3_driver_data *, unsigned int);
+	/* private submodule data */
+	void *data;		/* assigned by submodule */
+};
+
+/**********************************
+ * Functions needed by submodules *
+ **********************************/
+
+#define IOC3_W_IES		0
+#define IOC3_W_IEC		1
+
+/* registers a submodule for all existing and future IOC3 chips */
+extern int ioc3_register_submodule(struct ioc3_submodule *);
+/* unregisters a submodule */
+extern void ioc3_unregister_submodule(struct ioc3_submodule *);
+/* enables IRQs indicated by irq_mask for a specified IOC3 chip */
+extern void ioc3_enable(struct ioc3_submodule *, struct ioc3_driver_data *, unsigned int);
+/* ackowledges specified IRQs */
+extern void ioc3_ack(struct ioc3_submodule *, struct ioc3_driver_data *, unsigned int);
+/* disables IRQs indicated by irq_mask for a specified IOC3 chip */
+extern void ioc3_disable(struct ioc3_submodule *, struct ioc3_driver_data *, unsigned int);
+/* atomically sets GPCR bits */
+extern void ioc3_gpcr_set(struct ioc3_driver_data *, unsigned int);
+/* general ireg writer */
+extern void ioc3_write_ireg(struct ioc3_driver_data *idd, uint32_t value, int reg);
+
+#endif
diff --git a/include/linux/ioc4.h b/include/linux/ioc4.h
new file mode 100644
index 00000000..51e2b9fb
--- /dev/null
+++ b/include/linux/ioc4.h
@@ -0,0 +1,184 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2005 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+#ifndef _LINUX_IOC4_H
+#define _LINUX_IOC4_H
+
+#include <linux/interrupt.h>
+
+/***************
+ * Definitions *
+ ***************/
+
+/* Miscellaneous values inherent to hardware */
+
+#define IOC4_EXTINT_COUNT_DIVISOR 520	/* PCI clocks per COUNT tick */
+
+/***********************************
+ * Structures needed by subdrivers *
+ ***********************************/
+
+/* This structure fully describes the IOC4 miscellaneous registers which
+ * appear at bar[0]+0x00000 through bar[0]+0x0005c.  The corresponding
+ * PCI resource is managed by the main IOC4 driver because it contains
+ * registers of interest to many different IOC4 subdrivers.
+ */
+struct ioc4_misc_regs {
+	/* Miscellaneous IOC4 registers */
+	union ioc4_pci_err_addr_l {
+		uint32_t raw;
+		struct {
+			uint32_t valid:1;	/* Address captured */
+			uint32_t master_id:4;	/* Unit causing error
+						 * 0/1: Serial port 0 TX/RX
+						 * 2/3: Serial port 1 TX/RX
+						 * 4/5: Serial port 2 TX/RX
+						 * 6/7: Serial port 3 TX/RX
+						 * 8: ATA/ATAPI
+						 * 9-15: Undefined
+						 */
+			uint32_t mul_err:1;	/* Multiple errors occurred */
+			uint32_t addr:26;	/* Bits 31-6 of error addr */
+		} fields;
+	} pci_err_addr_l;
+	uint32_t pci_err_addr_h;	/* Bits 63-32 of error addr */
+	union ioc4_sio_int {
+		uint32_t raw;
+		struct {
+			uint8_t tx_mt:1;	/* TX ring buffer empty */
+			uint8_t rx_full:1;	/* RX ring buffer full */
+			uint8_t rx_high:1;	/* RX high-water exceeded */
+			uint8_t rx_timer:1;	/* RX timer has triggered */
+			uint8_t delta_dcd:1;	/* DELTA_DCD seen */
+			uint8_t delta_cts:1;	/* DELTA_CTS seen */
+			uint8_t intr_pass:1;	/* Interrupt pass-through */
+			uint8_t tx_explicit:1;	/* TX, MCW, or delay complete */
+		} fields[4];
+	} sio_ir;		/* Serial interrupt state */
+	union ioc4_other_int {
+		uint32_t raw;
+		struct {
+			uint32_t ata_int:1;	/* ATA port passthru */
+			uint32_t ata_memerr:1;	/* ATA halted by mem error */
+			uint32_t memerr:4;	/* Serial halted by mem err */
+			uint32_t kbd_int:1;	/* kbd/mouse intr asserted */
+			uint32_t reserved:16;	/* zero */
+			uint32_t rt_int:1;	/* INT_OUT section latch */
+			uint32_t gen_int:8;	/* Intr. from generic pins */
+		} fields;
+	} other_ir;		/* Other interrupt state */
+	union ioc4_sio_int sio_ies;	/* Serial interrupt enable set */
+	union ioc4_other_int other_ies;	/* Other interrupt enable set */
+	union ioc4_sio_int sio_iec;	/* Serial interrupt enable clear */
+	union ioc4_other_int other_iec;	/* Other interrupt enable clear */
+	union ioc4_sio_cr {
+		uint32_t raw;
+		struct {
+			uint32_t cmd_pulse:4;	/* Bytebus strobe width */
+			uint32_t arb_diag:3;	/* PCI bus requester */
+			uint32_t sio_diag_idle:1;	/* Active ser req? */
+			uint32_t ata_diag_idle:1;	/* Active ATA req? */
+			uint32_t ata_diag_active:1;	/* ATA req is winner */
+			uint32_t reserved:22;	/* zero */
+		} fields;
+	} sio_cr;
+	uint32_t unused1;
+	union ioc4_int_out {
+		uint32_t raw;
+		struct {
+			uint32_t count:16;	/* Period control */
+			uint32_t mode:3;	/* Output signal shape */
+			uint32_t reserved:11;	/* zero */
+			uint32_t diag:1;	/* Timebase control */
+			uint32_t int_out:1;	/* Current value */
+		} fields;
+	} int_out;		/* External interrupt output control */
+	uint32_t unused2;
+	union ioc4_gpcr {
+		uint32_t raw;
+		struct {
+			uint32_t dir:8;	/* Pin direction */
+			uint32_t edge:8;	/* Edge/level mode */
+			uint32_t reserved1:4;	/* zero */
+			uint32_t int_out_en:1;	/* INT_OUT enable */
+			uint32_t reserved2:11;	/* zero */
+		} fields;
+	} gpcr_s;		/* Generic PIO control set */
+	union ioc4_gpcr gpcr_c;	/* Generic PIO control clear */
+	union ioc4_gpdr {
+		uint32_t raw;
+		struct {
+			uint32_t gen_pin:8;	/* State of pins */
+			uint32_t reserved:24;
+		} fields;
+	} gpdr;			/* Generic PIO data */
+	uint32_t unused3;
+	union ioc4_gppr {
+		uint32_t raw;
+		struct {
+			uint32_t gen_pin:1;	/* Single pin state */
+			uint32_t reserved:31;
+		} fields;
+	} gppr[8];		/* Generic PIO pins */
+};
+
+/* Masks for GPCR DIR pins */
+#define IOC4_GPCR_DIR_0 0x01	/* External interrupt output */
+#define IOC4_GPCR_DIR_1 0x02	/* External interrupt input */
+#define IOC4_GPCR_DIR_2 0x04
+#define IOC4_GPCR_DIR_3 0x08	/* Keyboard/mouse presence */
+#define IOC4_GPCR_DIR_4 0x10	/* Ser. port 0 xcvr select (0=232, 1=422) */
+#define IOC4_GPCR_DIR_5 0x20	/* Ser. port 1 xcvr select (0=232, 1=422) */
+#define IOC4_GPCR_DIR_6 0x40	/* Ser. port 2 xcvr select (0=232, 1=422) */
+#define IOC4_GPCR_DIR_7 0x80	/* Ser. port 3 xcvr select (0=232, 1=422) */
+
+/* Masks for GPCR EDGE pins */
+#define IOC4_GPCR_EDGE_0 0x01
+#define IOC4_GPCR_EDGE_1 0x02	/* External interrupt input */
+#define IOC4_GPCR_EDGE_2 0x04
+#define IOC4_GPCR_EDGE_3 0x08
+#define IOC4_GPCR_EDGE_4 0x10
+#define IOC4_GPCR_EDGE_5 0x20
+#define IOC4_GPCR_EDGE_6 0x40
+#define IOC4_GPCR_EDGE_7 0x80
+
+#define IOC4_VARIANT_IO9	0x0900
+#define IOC4_VARIANT_PCI_RT	0x0901
+#define IOC4_VARIANT_IO10	0x1000
+
+/* One of these per IOC4 */
+struct ioc4_driver_data {
+	struct list_head idd_list;
+	unsigned long idd_bar0;
+	struct pci_dev *idd_pdev;
+	const struct pci_device_id *idd_pci_id;
+	struct ioc4_misc_regs __iomem *idd_misc_regs;
+	unsigned long count_period;
+	void *idd_serial_data;
+	unsigned int idd_variant;
+};
+
+/* One per submodule */
+struct ioc4_submodule {
+	struct list_head is_list;
+	char *is_name;
+	struct module *is_owner;
+	int (*is_probe) (struct ioc4_driver_data *);
+	int (*is_remove) (struct ioc4_driver_data *);
+};
+
+#define IOC4_NUM_CARDS		8	/* max cards per partition */
+
+/**********************************
+ * Functions needed by submodules *
+ **********************************/
+
+extern int ioc4_register_submodule(struct ioc4_submodule *);
+extern void ioc4_unregister_submodule(struct ioc4_submodule *);
+
+#endif				/* _LINUX_IOC4_H */
diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h
new file mode 100644
index 00000000..1a301806
--- /dev/null
+++ b/include/linux/iocontext.h
@@ -0,0 +1,152 @@
+#ifndef IOCONTEXT_H
+#define IOCONTEXT_H
+
+#include <linux/radix-tree.h>
+#include <linux/rcupdate.h>
+#include <linux/workqueue.h>
+
+enum {
+	ICQ_IOPRIO_CHANGED	= 1 << 0,
+	ICQ_CGROUP_CHANGED	= 1 << 1,
+	ICQ_EXITED		= 1 << 2,
+
+	ICQ_CHANGED_MASK	= ICQ_IOPRIO_CHANGED | ICQ_CGROUP_CHANGED,
+};
+
+/*
+ * An io_cq (icq) is association between an io_context (ioc) and a
+ * request_queue (q).  This is used by elevators which need to track
+ * information per ioc - q pair.
+ *
+ * Elevator can request use of icq by setting elevator_type->icq_size and
+ * ->icq_align.  Both size and align must be larger than that of struct
+ * io_cq and elevator can use the tail area for private information.  The
+ * recommended way to do this is defining a struct which contains io_cq as
+ * the first member followed by private members and using its size and
+ * align.  For example,
+ *
+ *	struct snail_io_cq {
+ *		struct io_cq	icq;
+ *		int		poke_snail;
+ *		int		feed_snail;
+ *	};
+ *
+ *	struct elevator_type snail_elv_type {
+ *		.ops =		{ ... },
+ *		.icq_size =	sizeof(struct snail_io_cq),
+ *		.icq_align =	__alignof__(struct snail_io_cq),
+ *		...
+ *	};
+ *
+ * If icq_size is set, block core will manage icq's.  All requests will
+ * have its ->elv.icq field set before elevator_ops->elevator_set_req_fn()
+ * is called and be holding a reference to the associated io_context.
+ *
+ * Whenever a new icq is created, elevator_ops->elevator_init_icq_fn() is
+ * called and, on destruction, ->elevator_exit_icq_fn().  Both functions
+ * are called with both the associated io_context and queue locks held.
+ *
+ * Elevator is allowed to lookup icq using ioc_lookup_icq() while holding
+ * queue lock but the returned icq is valid only until the queue lock is
+ * released.  Elevators can not and should not try to create or destroy
+ * icq's.
+ *
+ * As icq's are linked from both ioc and q, the locking rules are a bit
+ * complex.
+ *
+ * - ioc lock nests inside q lock.
+ *
+ * - ioc->icq_list and icq->ioc_node are protected by ioc lock.
+ *   q->icq_list and icq->q_node by q lock.
+ *
+ * - ioc->icq_tree and ioc->icq_hint are protected by ioc lock, while icq
+ *   itself is protected by q lock.  However, both the indexes and icq
+ *   itself are also RCU managed and lookup can be performed holding only
+ *   the q lock.
+ *
+ * - icq's are not reference counted.  They are destroyed when either the
+ *   ioc or q goes away.  Each request with icq set holds an extra
+ *   reference to ioc to ensure it stays until the request is completed.
+ *
+ * - Linking and unlinking icq's are performed while holding both ioc and q
+ *   locks.  Due to the lock ordering, q exit is simple but ioc exit
+ *   requires reverse-order double lock dance.
+ */
+struct io_cq {
+	struct request_queue	*q;
+	struct io_context	*ioc;
+
+	/*
+	 * q_node and ioc_node link io_cq through icq_list of q and ioc
+	 * respectively.  Both fields are unused once ioc_exit_icq() is
+	 * called and shared with __rcu_icq_cache and __rcu_head which are
+	 * used for RCU free of io_cq.
+	 */
+	union {
+		struct list_head	q_node;
+		struct kmem_cache	*__rcu_icq_cache;
+	};
+	union {
+		struct hlist_node	ioc_node;
+		struct rcu_head		__rcu_head;
+	};
+
+	unsigned int		flags;
+};
+
+/*
+ * I/O subsystem state of the associated processes.  It is refcounted
+ * and kmalloc'ed. These could be shared between processes.
+ */
+struct io_context {
+	atomic_long_t refcount;
+	atomic_t nr_tasks;
+
+	/* all the fields below are protected by this lock */
+	spinlock_t lock;
+
+	unsigned short ioprio;
+
+	/*
+	 * For request batching
+	 */
+	int nr_batch_requests;     /* Number of requests left in the batch */
+	unsigned long last_waited; /* Time last woken after wait for request */
+
+	struct radix_tree_root	icq_tree;
+	struct io_cq __rcu	*icq_hint;
+	struct hlist_head	icq_list;
+
+	struct work_struct release_work;
+};
+
+static inline struct io_context *ioc_task_link(struct io_context *ioc)
+{
+	/*
+	 * if ref count is zero, don't allow sharing (ioc is going away, it's
+	 * a race).
+	 */
+	if (ioc && atomic_long_inc_not_zero(&ioc->refcount)) {
+		atomic_inc(&ioc->nr_tasks);
+		return ioc;
+	}
+
+	return NULL;
+}
+
+struct task_struct;
+#ifdef CONFIG_BLOCK
+void put_io_context(struct io_context *ioc);
+void exit_io_context(struct task_struct *task);
+struct io_context *get_task_io_context(struct task_struct *task,
+				       gfp_t gfp_flags, int node);
+void ioc_ioprio_changed(struct io_context *ioc, int ioprio);
+void ioc_cgroup_changed(struct io_context *ioc);
+unsigned int icq_get_changed(struct io_cq *icq);
+#else
+struct io_context;
+static inline void put_io_context(struct io_context *ioc) { }
+static inline void exit_io_context(struct task_struct *task) { }
+#endif
+
+#endif
diff --git a/include/linux/ioctl.h b/include/linux/ioctl.h
new file mode 100644
index 00000000..aa91eb39
--- /dev/null
+++ b/include/linux/ioctl.h
@@ -0,0 +1,7 @@
+#ifndef _LINUX_IOCTL_H
+#define _LINUX_IOCTL_H
+
+#include <asm/ioctl.h>
+
+#endif /* _LINUX_IOCTL_H */
+
diff --git a/include/linux/iommu-helper.h b/include/linux/iommu-helper.h
new file mode 100644
index 00000000..86bdeffe
--- /dev/null
+++ b/include/linux/iommu-helper.h
@@ -0,0 +1,34 @@
+#ifndef _LINUX_IOMMU_HELPER_H
+#define _LINUX_IOMMU_HELPER_H
+
+#include <linux/kernel.h>
+
+static inline unsigned long iommu_device_max_index(unsigned long size,
+						   unsigned long offset,
+						   u64 dma_mask)
+{
+	if (size + offset > dma_mask)
+		return dma_mask - offset + 1;
+	else
+		return size;
+}
+
+extern int iommu_is_span_boundary(unsigned int index, unsigned int nr,
+				  unsigned long shift,
+				  unsigned long boundary_size);
+extern unsigned long iommu_area_alloc(unsigned long *map, unsigned long size,
+				      unsigned long start, unsigned int nr,
+				      unsigned long shift,
+				      unsigned long boundary_size,
+				      unsigned long align_mask);
+
+static inline unsigned long iommu_num_pages(unsigned long addr,
+					    unsigned long len,
+					    unsigned long io_page_size)
+{
+	unsigned long size = (addr & (io_page_size - 1)) + len;
+
+	return DIV_ROUND_UP(size, io_page_size);
+}
+
+#endif
diff --git a/include/linux/iommu.h b/include/linux/iommu.h
new file mode 100644
index 00000000..d9375804
--- /dev/null
+++ b/include/linux/iommu.h
@@ -0,0 +1,205 @@
+/*
+ * Copyright (C) 2007-2008 Advanced Micro Devices, Inc.
+ * Author: Joerg Roedel <joerg.roedel@amd.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef __LINUX_IOMMU_H
+#define __LINUX_IOMMU_H
+
+#include <linux/errno.h>
+
+#define IOMMU_READ	(1)
+#define IOMMU_WRITE	(2)
+#define IOMMU_CACHE	(4) /* DMA cache coherency */
+
+struct iommu_ops;
+struct bus_type;
+struct device;
+struct iommu_domain;
+
+/* iommu fault flags */
+#define IOMMU_FAULT_READ	0x0
+#define IOMMU_FAULT_WRITE	0x1
+
+typedef int (*iommu_fault_handler_t)(struct iommu_domain *,
+				struct device *, unsigned long, int);
+
+struct iommu_domain {
+	struct iommu_ops *ops;
+	void *priv;
+	iommu_fault_handler_t handler;
+};
+
+#define IOMMU_CAP_CACHE_COHERENCY	0x1
+#define IOMMU_CAP_INTR_REMAP		0x2	/* isolates device intrs */
+
+#ifdef CONFIG_IOMMU_API
+
+/**
+ * struct iommu_ops - iommu ops and capabilities
+ * @domain_init: init iommu domain
+ * @domain_destroy: destroy iommu domain
+ * @attach_dev: attach device to an iommu domain
+ * @detach_dev: detach device from an iommu domain
+ * @map: map a physically contiguous memory region to an iommu domain
+ * @unmap: unmap a physically contiguous memory region from an iommu domain
+ * @iova_to_phys: translate iova to physical address
+ * @domain_has_cap: domain capabilities query
+ * @commit: commit iommu domain
+ * @pgsize_bitmap: bitmap of supported page sizes
+ */
+struct iommu_ops {
+	int (*domain_init)(struct iommu_domain *domain);
+	void (*domain_destroy)(struct iommu_domain *domain);
+	int (*attach_dev)(struct iommu_domain *domain, struct device *dev);
+	void (*detach_dev)(struct iommu_domain *domain, struct device *dev);
+	int (*map)(struct iommu_domain *domain, unsigned long iova,
+		   phys_addr_t paddr, size_t size, int prot);
+	size_t (*unmap)(struct iommu_domain *domain, unsigned long iova,
+		     size_t size);
+	phys_addr_t (*iova_to_phys)(struct iommu_domain *domain,
+				    unsigned long iova);
+	int (*domain_has_cap)(struct iommu_domain *domain,
+			      unsigned long cap);
+	int (*device_group)(struct device *dev, unsigned int *groupid);
+	unsigned long pgsize_bitmap;
+};
+
+extern int bus_set_iommu(struct bus_type *bus, struct iommu_ops *ops);
+extern bool iommu_present(struct bus_type *bus);
+extern struct iommu_domain *iommu_domain_alloc(struct bus_type *bus);
+extern void iommu_domain_free(struct iommu_domain *domain);
+extern int iommu_attach_device(struct iommu_domain *domain,
+			       struct device *dev);
+extern void iommu_detach_device(struct iommu_domain *domain,
+				struct device *dev);
+extern int iommu_map(struct iommu_domain *domain, unsigned long iova,
+		     phys_addr_t paddr, size_t size, int prot);
+extern size_t iommu_unmap(struct iommu_domain *domain, unsigned long iova,
+		       size_t size);
+extern phys_addr_t iommu_iova_to_phys(struct iommu_domain *domain,
+				      unsigned long iova);
+extern int iommu_domain_has_cap(struct iommu_domain *domain,
+				unsigned long cap);
+extern void iommu_set_fault_handler(struct iommu_domain *domain,
+					iommu_fault_handler_t handler);
+extern int iommu_device_group(struct device *dev, unsigned int *groupid);
+
+/**
+ * report_iommu_fault() - report about an IOMMU fault to the IOMMU framework
+ * @domain: the iommu domain where the fault has happened
+ * @dev: the device where the fault has happened
+ * @iova: the faulting address
+ * @flags: mmu fault flags (e.g. IOMMU_FAULT_READ/IOMMU_FAULT_WRITE/...)
+ *
+ * This function should be called by the low-level IOMMU implementations
+ * whenever IOMMU faults happen, to allow high-level users, that are
+ * interested in such events, to know about them.
+ *
+ * This event may be useful for several possible use cases:
+ * - mere logging of the event
+ * - dynamic TLB/PTE loading
+ * - if restarting of the faulting device is required
+ *
+ * Returns 0 on success and an appropriate error code otherwise (if dynamic
+ * PTE/TLB loading will one day be supported, implementations will be able
+ * to tell whether it succeeded or not according to this return value).
+ *
+ * Specifically, -ENOSYS is returned if a fault handler isn't installed
+ * (though fault handlers can also return -ENOSYS, in case they want to
+ * elicit the default behavior of the IOMMU drivers).
+ */
+static inline int report_iommu_fault(struct iommu_domain *domain,
+		struct device *dev, unsigned long iova, int flags)
+{
+	int ret = -ENOSYS;
+
+	/*
+	 * if upper layers showed interest and installed a fault handler,
+	 * invoke it.
+	 */
+	if (domain->handler)
+		ret = domain->handler(domain, dev, iova, flags);
+
+	return ret;
+}
+
+#else /* CONFIG_IOMMU_API */
+
+struct iommu_ops {};
+
+static inline bool iommu_present(struct bus_type *bus)
+{
+	return false;
+}
+
+static inline struct iommu_domain *iommu_domain_alloc(struct bus_type *bus)
+{
+	return NULL;
+}
+
+static inline void iommu_domain_free(struct iommu_domain *domain)
+{
+}
+
+static inline int iommu_attach_device(struct iommu_domain *domain,
+				      struct device *dev)
+{
+	return -ENODEV;
+}
+
+static inline void iommu_detach_device(struct iommu_domain *domain,
+				       struct device *dev)
+{
+}
+
+static inline int iommu_map(struct iommu_domain *domain, unsigned long iova,
+			    phys_addr_t paddr, int gfp_order, int prot)
+{
+	return -ENODEV;
+}
+
+static inline int iommu_unmap(struct iommu_domain *domain, unsigned long iova,
+			      int gfp_order)
+{
+	return -ENODEV;
+}
+
+static inline phys_addr_t iommu_iova_to_phys(struct iommu_domain *domain,
+					     unsigned long iova)
+{
+	return 0;
+}
+
+static inline int domain_has_cap(struct iommu_domain *domain,
+				 unsigned long cap)
+{
+	return 0;
+}
+
+static inline void iommu_set_fault_handler(struct iommu_domain *domain,
+					iommu_fault_handler_t handler)
+{
+}
+
+static inline int iommu_device_group(struct device *dev, unsigned int *groupid)
+{
+	return -ENODEV;
+}
+
+#endif /* CONFIG_IOMMU_API */
+
+#endif /* __LINUX_IOMMU_H */
diff --git a/include/linux/ion.h b/include/linux/ion.h
new file mode 100644
index 00000000..a7d399c4
--- /dev/null
+++ b/include/linux/ion.h
@@ -0,0 +1,356 @@
+/*
+ * include/linux/ion.h
+ *
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _LINUX_ION_H
+#define _LINUX_ION_H
+
+#include <linux/types.h>
+
+struct ion_handle;
+/**
+ * enum ion_heap_types - list of all possible types of heaps
+ * @ION_HEAP_TYPE_SYSTEM:	 memory allocated via vmalloc
+ * @ION_HEAP_TYPE_SYSTEM_CONTIG: memory allocated via kmalloc
+ * @ION_HEAP_TYPE_CARVEOUT:	 memory allocated from a prereserved
+ * 				 carveout heap, allocations are physically
+ * 				 contiguous
+ * @ION_NUM_HEAPS:		 helper for iterating over heaps, a bit mask
+ * 				 is used to identify the heaps, so only 32
+ * 				 total heap types are supported
+ */
+enum ion_heap_type {
+	ION_HEAP_TYPE_SYSTEM,
+	ION_HEAP_TYPE_SYSTEM_CONTIG,
+	ION_HEAP_TYPE_CARVEOUT,
+	ION_HEAP_TYPE_CUSTOM, /* must be last so device specific heaps always
+				 are at the end of this enum */
+	ION_NUM_HEAPS = 16,
+};
+
+#define ION_HEAP_SYSTEM_MASK		(1 << ION_HEAP_TYPE_SYSTEM)
+#define ION_HEAP_SYSTEM_CONTIG_MASK	(1 << ION_HEAP_TYPE_SYSTEM_CONTIG)
+#define ION_HEAP_CARVEOUT_MASK		(1 << ION_HEAP_TYPE_CARVEOUT)
+
+/**
+ * heap flags - the lower 16 bits are used by core ion, the upper 16
+ * bits are reserved for use by the heaps themselves.
+ */
+#define ION_FLAG_CACHED 1		/* mappings of this buffer should be
+					   cached, ion will do cache
+					   maintenance when the buffer is
+					   mapped for dma */
+#define ION_FLAG_CACHED_NEEDS_SYNC 2	/* mappings of this buffer will created
+					   at mmap time, if this is set
+					   caches must be managed manually */
+
+#ifdef __KERNEL__
+struct ion_device;
+struct ion_heap;
+struct ion_mapper;
+struct ion_client;
+struct ion_buffer;
+
+/* This should be removed some day when phys_addr_t's are fully
+   plumbed in the kernel, and all instances of ion_phys_addr_t should
+   be converted to phys_addr_t.  For the time being many kernel interfaces
+   do not accept phys_addr_t's that would have to */
+#define ion_phys_addr_t unsigned long
+
+/**
+ * struct ion_platform_heap - defines a heap in the given platform
+ * @type:	type of the heap from ion_heap_type enum
+ * @id:		unique identifier for heap.  When allocating (lower numbers 
+ * 		will be allocated from first)
+ * @name:	used for debug purposes
+ * @base:	base address of heap in physical memory if applicable
+ * @size:	size of the heap in bytes if applicable
+ *
+ * Provided by the board file.
+ */
+struct ion_platform_heap {
+	enum ion_heap_type type;
+	unsigned int id;
+	const char *name;
+	ion_phys_addr_t base;
+	size_t size;
+};
+
+/**
+ * struct ion_platform_data - array of platform heaps passed from board file
+ * @nr:		number of structures in the array
+ * @heaps:	array of platform_heap structions
+ *
+ * Provided by the board file in the form of platform data to a platform device.
+ */
+struct ion_platform_data {
+	int nr;
+	struct ion_platform_heap heaps[];
+};
+
+/**
+ * ion_reserve() - reserve memory for ion heaps if applicable
+ * @data:	platform data specifying starting physical address and
+ *		size
+ *
+ * Calls memblock reserve to set aside memory for heaps that are
+ * located at specific memory addresses or of specfic sizes not
+ * managed by the kernel
+ */
+void ion_reserve(struct ion_platform_data *data);
+
+/**
+ * ion_client_create() -  allocate a client and returns it
+ * @dev:	the global ion device
+ * @heap_mask:	mask of heaps this client can allocate from
+ * @name:	used for debugging
+ */
+struct ion_client *ion_client_create(struct ion_device *dev,
+				     unsigned int heap_mask, const char *name);
+
+/**
+ * ion_client_destroy() -  free's a client and all it's handles
+ * @client:	the client
+ *
+ * Free the provided client and all it's resources including
+ * any handles it is holding.
+ */
+void ion_client_destroy(struct ion_client *client);
+
+/**
+ * ion_alloc - allocate ion memory
+ * @client:	the client
+ * @len:	size of the allocation
+ * @align:	requested allocation alignment, lots of hardware blocks have
+ *		alignment requirements of some kind
+ * @heap_mask:	mask of heaps to allocate from, if multiple bits are set
+ *		heaps will be tried in order from lowest to highest order bit
+ * @flags:	heap flags, the low 16 bits are consumed by ion, the high 16
+ *		bits are passed on to the respective heap and can be heap
+ * 		custom
+ *
+ * Allocate memory in one of the heaps provided in heap mask and return
+ * an opaque handle to it.
+ */
+struct ion_handle *ion_alloc(struct ion_client *client, size_t len,
+			     size_t align, unsigned int heap_mask,
+			     unsigned int flags);
+
+/**
+ * ion_free - free a handle
+ * @client:	the client
+ * @handle:	the handle to free
+ *
+ * Free the provided handle.
+ */
+void ion_free(struct ion_client *client, struct ion_handle *handle);
+
+/**
+ * ion_phys - returns the physical address and len of a handle
+ * @client:	the client
+ * @handle:	the handle
+ * @addr:	a pointer to put the address in
+ * @len:	a pointer to put the length in
+ *
+ * This function queries the heap for a particular handle to get the
+ * handle's physical address.  It't output is only correct if
+ * a heap returns physically contiguous memory -- in other cases
+ * this api should not be implemented -- ion_sg_table should be used
+ * instead.  Returns -EINVAL if the handle is invalid.  This has
+ * no implications on the reference counting of the handle --
+ * the returned value may not be valid if the caller is not
+ * holding a reference.
+ */
+int ion_phys(struct ion_client *client, struct ion_handle *handle,
+	     ion_phys_addr_t *addr, size_t *len);
+
+/**
+ * ion_map_dma - return an sg_table describing a handle
+ * @client:	the client
+ * @handle:	the handle
+ *
+ * This function returns the sg_table describing
+ * a particular ion handle.
+ */
+struct sg_table *ion_sg_table(struct ion_client *client,
+			      struct ion_handle *handle);
+
+/**
+ * ion_map_kernel - create mapping for the given handle
+ * @client:	the client
+ * @handle:	handle to map
+ *
+ * Map the given handle into the kernel and return a kernel address that
+ * can be used to access this address.
+ */
+void *ion_map_kernel(struct ion_client *client, struct ion_handle *handle);
+
+/**
+ * ion_unmap_kernel() - destroy a kernel mapping for a handle
+ * @client:	the client
+ * @handle:	handle to unmap
+ */
+void ion_unmap_kernel(struct ion_client *client, struct ion_handle *handle);
+
+/**
+ * ion_share_dma_buf() - given an ion client, create a dma-buf fd
+ * @client:	the client
+ * @handle:	the handle
+ */
+int ion_share_dma_buf(struct ion_client *client, struct ion_handle *handle);
+
+/**
+ * ion_import_dma_buf() - given an dma-buf fd from the ion exporter get handle
+ * @client:	the client
+ * @fd:		the dma-buf fd
+ *
+ * Given an dma-buf fd that was allocated through ion via ion_share_dma_buf,
+ * import that fd and return a handle representing it.  If a dma-buf from
+ * another exporter is passed in this function will return ERR_PTR(-EINVAL)
+ */
+struct ion_handle *ion_import_dma_buf(struct ion_client *client, int fd);
+
+#endif /* __KERNEL__ */
+
+/**
+ * DOC: Ion Userspace API
+ *
+ * create a client by opening /dev/ion
+ * most operations handled via following ioctls
+ *
+ */
+
+/**
+ * struct ion_allocation_data - metadata passed from userspace for allocations
+ * @len:	size of the allocation
+ * @align:	required alignment of the allocation
+ * @heap_mask:	mask of heaps to allocate from
+ * @flags:	flags passed to heap
+ * @handle:	pointer that will be populated with a cookie to use to refer
+ *		to this allocation
+ *
+ * Provided by userspace as an argument to the ioctl
+ */
+struct ion_allocation_data {
+	size_t len;
+	size_t align;
+	unsigned int heap_mask;
+	unsigned int flags;
+	struct ion_handle *handle;
+};
+
+/**
+ * struct ion_fd_data - metadata passed to/from userspace for a handle/fd pair
+ * @handle:	a handle
+ * @fd:		a file descriptor representing that handle
+ *
+ * For ION_IOC_SHARE or ION_IOC_MAP userspace populates the handle field with
+ * the handle returned from ion alloc, and the kernel returns the file
+ * descriptor to share or map in the fd field.  For ION_IOC_IMPORT, userspace
+ * provides the file descriptor and the kernel returns the handle.
+ */
+struct ion_fd_data {
+	struct ion_handle *handle;
+	int fd;
+};
+
+/**
+ * struct ion_handle_data - a handle passed to/from the kernel
+ * @handle:	a handle
+ */
+struct ion_handle_data {
+	struct ion_handle *handle;
+};
+
+/**
+ * struct ion_custom_data - metadata passed to/from userspace for a custom ioctl
+ * @cmd:	the custom ioctl function to call
+ * @arg:	additional data to pass to the custom ioctl, typically a user
+ *		pointer to a predefined structure
+ *
+ * This works just like the regular cmd and arg fields of an ioctl.
+ */
+struct ion_custom_data {
+	unsigned int cmd;
+	unsigned long arg;
+};
+
+#define ION_IOC_MAGIC		'I'
+
+/**
+ * DOC: ION_IOC_ALLOC - allocate memory
+ *
+ * Takes an ion_allocation_data struct and returns it with the handle field
+ * populated with the opaque handle for the allocation.
+ */
+#define ION_IOC_ALLOC		_IOWR(ION_IOC_MAGIC, 0, \
+				      struct ion_allocation_data)
+
+/**
+ * DOC: ION_IOC_FREE - free memory
+ *
+ * Takes an ion_handle_data struct and frees the handle.
+ */
+#define ION_IOC_FREE		_IOWR(ION_IOC_MAGIC, 1, struct ion_handle_data)
+
+/**
+ * DOC: ION_IOC_MAP - get a file descriptor to mmap
+ *
+ * Takes an ion_fd_data struct with the handle field populated with a valid
+ * opaque handle.  Returns the struct with the fd field set to a file
+ * descriptor open in the current address space.  This file descriptor
+ * can then be used as an argument to mmap.
+ */
+#define ION_IOC_MAP		_IOWR(ION_IOC_MAGIC, 2, struct ion_fd_data)
+
+/**
+ * DOC: ION_IOC_SHARE - creates a file descriptor to use to share an allocation
+ *
+ * Takes an ion_fd_data struct with the handle field populated with a valid
+ * opaque handle.  Returns the struct with the fd field set to a file
+ * descriptor open in the current address space.  This file descriptor
+ * can then be passed to another process.  The corresponding opaque handle can
+ * be retrieved via ION_IOC_IMPORT.
+ */
+#define ION_IOC_SHARE		_IOWR(ION_IOC_MAGIC, 4, struct ion_fd_data)
+
+/**
+ * DOC: ION_IOC_IMPORT - imports a shared file descriptor
+ *
+ * Takes an ion_fd_data struct with the fd field populated with a valid file
+ * descriptor obtained from ION_IOC_SHARE and returns the struct with the handle
+ * filed set to the corresponding opaque handle.
+ */
+#define ION_IOC_IMPORT		_IOWR(ION_IOC_MAGIC, 5, struct ion_fd_data)
+
+/**
+ * DOC: ION_IOC_SYNC - syncs a shared file descriptors to memory
+ *
+ * Deprecated in favor of using the dma_buf api's correctly (syncing
+ * will happend automatically when the buffer is mapped to a device).
+ * If necessary should be used after touching a cached buffer from the cpu,
+ * this will make the buffer in memory coherent.
+ */
+#define ION_IOC_SYNC		_IOWR(ION_IOC_MAGIC, 7, struct ion_fd_data)
+
+/**
+ * DOC: ION_IOC_CUSTOM - call architecture specific ion ioctl
+ *
+ * Takes the argument of the architecture specific ioctl to call and
+ * passes appropriate userdata for that ioctl
+ */
+#define ION_IOC_CUSTOM		_IOWR(ION_IOC_MAGIC, 6, struct ion_custom_data)
+
+#endif /* _LINUX_ION_H */
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
new file mode 100644
index 00000000..e885ba23
--- /dev/null
+++ b/include/linux/ioport.h
@@ -0,0 +1,227 @@
+/*
+ * ioport.h	Definitions of routines for detecting, reserving and
+ *		allocating system resources.
+ *
+ * Authors:	Linus Torvalds
+ */
+
+#ifndef _LINUX_IOPORT_H
+#define _LINUX_IOPORT_H
+
+#ifndef __ASSEMBLY__
+#include <linux/compiler.h>
+#include <linux/types.h>
+/*
+ * Resources are tree-like, allowing
+ * nesting etc..
+ */
+struct resource {
+	resource_size_t start;
+	resource_size_t end;
+	const char *name;
+	unsigned long flags;
+	struct resource *parent, *sibling, *child;
+};
+
+/*
+ * IO resources have these defined flags.
+ */
+#define IORESOURCE_BITS		0x000000ff	/* Bus-specific bits */
+
+#define IORESOURCE_TYPE_BITS	0x00001f00	/* Resource type */
+#define IORESOURCE_IO		0x00000100
+#define IORESOURCE_MEM		0x00000200
+#define IORESOURCE_IRQ		0x00000400
+#define IORESOURCE_DMA		0x00000800
+#define IORESOURCE_BUS		0x00001000
+
+#define IORESOURCE_PREFETCH	0x00002000	/* No side effects */
+#define IORESOURCE_READONLY	0x00004000
+#define IORESOURCE_CACHEABLE	0x00008000
+#define IORESOURCE_RANGELENGTH	0x00010000
+#define IORESOURCE_SHADOWABLE	0x00020000
+
+#define IORESOURCE_SIZEALIGN	0x00040000	/* size indicates alignment */
+#define IORESOURCE_STARTALIGN	0x00080000	/* start field is alignment */
+
+#define IORESOURCE_MEM_64	0x00100000
+#define IORESOURCE_WINDOW	0x00200000	/* forwarded by bridge */
+#define IORESOURCE_MUXED	0x00400000	/* Resource is software muxed */
+
+#define IORESOURCE_EXCLUSIVE	0x08000000	/* Userland may not map this resource */
+#define IORESOURCE_DISABLED	0x10000000
+#define IORESOURCE_UNSET	0x20000000
+#define IORESOURCE_AUTO		0x40000000
+#define IORESOURCE_BUSY		0x80000000	/* Driver has marked this resource busy */
+
+/* PnP IRQ specific bits (IORESOURCE_BITS) */
+#define IORESOURCE_IRQ_HIGHEDGE		(1<<0)
+#define IORESOURCE_IRQ_LOWEDGE		(1<<1)
+#define IORESOURCE_IRQ_HIGHLEVEL	(1<<2)
+#define IORESOURCE_IRQ_LOWLEVEL		(1<<3)
+#define IORESOURCE_IRQ_SHAREABLE	(1<<4)
+#define IORESOURCE_IRQ_OPTIONAL 	(1<<5)
+
+/* PnP DMA specific bits (IORESOURCE_BITS) */
+#define IORESOURCE_DMA_TYPE_MASK	(3<<0)
+#define IORESOURCE_DMA_8BIT		(0<<0)
+#define IORESOURCE_DMA_8AND16BIT	(1<<0)
+#define IORESOURCE_DMA_16BIT		(2<<0)
+
+#define IORESOURCE_DMA_MASTER		(1<<2)
+#define IORESOURCE_DMA_BYTE		(1<<3)
+#define IORESOURCE_DMA_WORD		(1<<4)
+
+#define IORESOURCE_DMA_SPEED_MASK	(3<<6)
+#define IORESOURCE_DMA_COMPATIBLE	(0<<6)
+#define IORESOURCE_DMA_TYPEA		(1<<6)
+#define IORESOURCE_DMA_TYPEB		(2<<6)
+#define IORESOURCE_DMA_TYPEF		(3<<6)
+
+/* PnP memory I/O specific bits (IORESOURCE_BITS) */
+#define IORESOURCE_MEM_WRITEABLE	(1<<0)	/* dup: IORESOURCE_READONLY */
+#define IORESOURCE_MEM_CACHEABLE	(1<<1)	/* dup: IORESOURCE_CACHEABLE */
+#define IORESOURCE_MEM_RANGELENGTH	(1<<2)	/* dup: IORESOURCE_RANGELENGTH */
+#define IORESOURCE_MEM_TYPE_MASK	(3<<3)
+#define IORESOURCE_MEM_8BIT		(0<<3)
+#define IORESOURCE_MEM_16BIT		(1<<3)
+#define IORESOURCE_MEM_8AND16BIT	(2<<3)
+#define IORESOURCE_MEM_32BIT		(3<<3)
+#define IORESOURCE_MEM_SHADOWABLE	(1<<5)	/* dup: IORESOURCE_SHADOWABLE */
+#define IORESOURCE_MEM_EXPANSIONROM	(1<<6)
+
+/* PnP I/O specific bits (IORESOURCE_BITS) */
+#define IORESOURCE_IO_16BIT_ADDR	(1<<0)
+#define IORESOURCE_IO_FIXED		(1<<1)
+
+/* PCI ROM control bits (IORESOURCE_BITS) */
+#define IORESOURCE_ROM_ENABLE		(1<<0)	/* ROM is enabled, same as PCI_ROM_ADDRESS_ENABLE */
+#define IORESOURCE_ROM_SHADOW		(1<<1)	/* ROM is copy at C000:0 */
+#define IORESOURCE_ROM_COPY		(1<<2)	/* ROM is alloc'd copy, resource field overlaid */
+#define IORESOURCE_ROM_BIOS_COPY	(1<<3)	/* ROM is BIOS copy, resource field overlaid */
+
+/* PCI control bits.  Shares IORESOURCE_BITS with above PCI ROM.  */
+#define IORESOURCE_PCI_FIXED		(1<<4)	/* Do not move resource */
+
+
+/* helpers to define resources */
+#define DEFINE_RES_NAMED(_start, _size, _name, _flags)			\
+	{								\
+		.start = (_start),					\
+		.end = (_start) + (_size) - 1,				\
+		.name = (_name),					\
+		.flags = (_flags),					\
+	}
+
+#define DEFINE_RES_IO_NAMED(_start, _size, _name)			\
+	DEFINE_RES_NAMED((_start), (_size), (_name), IORESOURCE_IO)
+#define DEFINE_RES_IO(_start, _size)					\
+	DEFINE_RES_IO_NAMED((_start), (_size), NULL)
+
+#define DEFINE_RES_MEM_NAMED(_start, _size, _name)			\
+	DEFINE_RES_NAMED((_start), (_size), (_name), IORESOURCE_MEM)
+#define DEFINE_RES_MEM(_start, _size)					\
+	DEFINE_RES_MEM_NAMED((_start), (_size), NULL)
+
+#define DEFINE_RES_IRQ_NAMED(_irq, _name)				\
+	DEFINE_RES_NAMED((_irq), 1, (_name), IORESOURCE_IRQ)
+#define DEFINE_RES_IRQ(_irq)						\
+	DEFINE_RES_IRQ_NAMED((_irq), NULL)
+
+#define DEFINE_RES_DMA_NAMED(_dma, _name)				\
+	DEFINE_RES_NAMED((_dma), 1, (_name), IORESOURCE_DMA)
+#define DEFINE_RES_DMA(_dma)						\
+	DEFINE_RES_DMA_NAMED((_dma), NULL)
+
+/* PC/ISA/whatever - the normal PC address spaces: IO and memory */
+extern struct resource ioport_resource;
+extern struct resource iomem_resource;
+
+extern struct resource *request_resource_conflict(struct resource *root, struct resource *new);
+extern int request_resource(struct resource *root, struct resource *new);
+extern int release_resource(struct resource *new);
+void release_child_resources(struct resource *new);
+extern void reserve_region_with_split(struct resource *root,
+			     resource_size_t start, resource_size_t end,
+			     const char *name);
+extern struct resource *insert_resource_conflict(struct resource *parent, struct resource *new);
+extern int insert_resource(struct resource *parent, struct resource *new);
+extern void insert_resource_expand_to_fit(struct resource *root, struct resource *new);
+extern void arch_remove_reservations(struct resource *avail);
+extern int allocate_resource(struct resource *root, struct resource *new,
+			     resource_size_t size, resource_size_t min,
+			     resource_size_t max, resource_size_t align,
+			     resource_size_t (*alignf)(void *,
+						       const struct resource *,
+						       resource_size_t,
+						       resource_size_t),
+			     void *alignf_data);
+struct resource *lookup_resource(struct resource *root, resource_size_t start);
+int adjust_resource(struct resource *res, resource_size_t start,
+		    resource_size_t size);
+resource_size_t resource_alignment(struct resource *res);
+static inline resource_size_t resource_size(const struct resource *res)
+{
+	return res->end - res->start + 1;
+}
+static inline unsigned long resource_type(const struct resource *res)
+{
+	return res->flags & IORESOURCE_TYPE_BITS;
+}
+
+/* Convenience shorthand with allocation */
+#define request_region(start,n,name)		__request_region(&ioport_resource, (start), (n), (name), 0)
+#define request_muxed_region(start,n,name)	__request_region(&ioport_resource, (start), (n), (name), IORESOURCE_MUXED)
+#define __request_mem_region(start,n,name, excl) __request_region(&iomem_resource, (start), (n), (name), excl)
+#define request_mem_region(start,n,name) __request_region(&iomem_resource, (start), (n), (name), 0)
+#define request_mem_region_exclusive(start,n,name) \
+	__request_region(&iomem_resource, (start), (n), (name), IORESOURCE_EXCLUSIVE)
+#define rename_region(region, newname) do { (region)->name = (newname); } while (0)
+
+extern struct resource * __request_region(struct resource *,
+					resource_size_t start,
+					resource_size_t n,
+					const char *name, int flags);
+
+/* Compatibility cruft */
+#define release_region(start,n)	__release_region(&ioport_resource, (start), (n))
+#define check_mem_region(start,n)	__check_region(&iomem_resource, (start), (n))
+#define release_mem_region(start,n)	__release_region(&iomem_resource, (start), (n))
+
+extern int __check_region(struct resource *, resource_size_t, resource_size_t);
+extern void __release_region(struct resource *, resource_size_t,
+				resource_size_t);
+
+static inline int __deprecated check_region(resource_size_t s,
+						resource_size_t n)
+{
+	return __check_region(&ioport_resource, s, n);
+}
+
+/* Wrappers for managed devices */
+struct device;
+#define devm_request_region(dev,start,n,name) \
+	__devm_request_region(dev, &ioport_resource, (start), (n), (name))
+#define devm_request_mem_region(dev,start,n,name) \
+	__devm_request_region(dev, &iomem_resource, (start), (n), (name))
+
+extern struct resource * __devm_request_region(struct device *dev,
+				struct resource *parent, resource_size_t start,
+				resource_size_t n, const char *name);
+
+#define devm_release_region(dev, start, n) \
+	__devm_release_region(dev, &ioport_resource, (start), (n))
+#define devm_release_mem_region(dev, start, n) \
+	__devm_release_region(dev, &iomem_resource, (start), (n))
+
+extern void __devm_release_region(struct device *dev, struct resource *parent,
+				  resource_size_t start, resource_size_t n);
+extern int iomem_map_sanity_check(resource_size_t addr, unsigned long size);
+extern int iomem_is_exclusive(u64 addr);
+
+extern int
+walk_system_ram_range(unsigned long start_pfn, unsigned long nr_pages,
+		void *arg, int (*func)(unsigned long, unsigned long, void *));
+
+#endif /* __ASSEMBLY__ */
+#endif	/* _LINUX_IOPORT_H */
diff --git a/include/linux/ioprio.h b/include/linux/ioprio.h
new file mode 100644
index 00000000..76dad480
--- /dev/null
+++ b/include/linux/ioprio.h
@@ -0,0 +1,91 @@
+#ifndef IOPRIO_H
+#define IOPRIO_H
+
+#include <linux/sched.h>
+#include <linux/iocontext.h>
+
+/*
+ * Gives us 8 prio classes with 13-bits of data for each class
+ */
+#define IOPRIO_BITS		(16)
+#define IOPRIO_CLASS_SHIFT	(13)
+#define IOPRIO_PRIO_MASK	((1UL << IOPRIO_CLASS_SHIFT) - 1)
+
+#define IOPRIO_PRIO_CLASS(mask)	((mask) >> IOPRIO_CLASS_SHIFT)
+#define IOPRIO_PRIO_DATA(mask)	((mask) & IOPRIO_PRIO_MASK)
+#define IOPRIO_PRIO_VALUE(class, data)	(((class) << IOPRIO_CLASS_SHIFT) | data)
+
+#define ioprio_valid(mask)	(IOPRIO_PRIO_CLASS((mask)) != IOPRIO_CLASS_NONE)
+
+/*
+ * These are the io priority groups as implemented by CFQ. RT is the realtime
+ * class, it always gets premium service. BE is the best-effort scheduling
+ * class, the default for any process. IDLE is the idle scheduling class, it
+ * is only served when no one else is using the disk.
+ */
+enum {
+	IOPRIO_CLASS_NONE,
+	IOPRIO_CLASS_RT,
+	IOPRIO_CLASS_BE,
+	IOPRIO_CLASS_IDLE,
+};
+
+/*
+ * 8 best effort priority levels are supported
+ */
+#define IOPRIO_BE_NR	(8)
+
+enum {
+	IOPRIO_WHO_PROCESS = 1,
+	IOPRIO_WHO_PGRP,
+	IOPRIO_WHO_USER,
+};
+
+/*
+ * if process has set io priority explicitly, use that. if not, convert
+ * the cpu scheduler nice value to an io priority
+ */
+#define IOPRIO_NORM	(4)
+static inline int task_ioprio(struct io_context *ioc)
+{
+	if (ioprio_valid(ioc->ioprio))
+		return IOPRIO_PRIO_DATA(ioc->ioprio);
+
+	return IOPRIO_NORM;
+}
+
+static inline int task_ioprio_class(struct io_context *ioc)
+{
+	if (ioprio_valid(ioc->ioprio))
+		return IOPRIO_PRIO_CLASS(ioc->ioprio);
+
+	return IOPRIO_CLASS_BE;
+}
+
+static inline int task_nice_ioprio(struct task_struct *task)
+{
+	return (task_nice(task) + 20) / 5;
+}
+
+/*
+ * This is for the case where the task hasn't asked for a specific IO class.
+ * Check for idle and rt task process, and return appropriate IO class.
+ */
+static inline int task_nice_ioclass(struct task_struct *task)
+{
+	if (task->policy == SCHED_IDLE)
+		return IOPRIO_CLASS_IDLE;
+	else if (task->policy == SCHED_FIFO || task->policy == SCHED_RR)
+		return IOPRIO_CLASS_RT;
+	else
+		return IOPRIO_CLASS_BE;
+}
+
+/*
+ * For inheritance, return the highest of the two given priorities
+ */
+extern int ioprio_best(unsigned short aprio, unsigned short bprio);
+
+extern int set_task_ioprio(struct task_struct *task, int ioprio);
+
+#endif
diff --git a/include/linux/iova.h b/include/linux/iova.h
new file mode 100644
index 00000000..76a0759e
--- /dev/null
+++ b/include/linux/iova.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (c) 2006, Intel Corporation.
+ *
+ * This file is released under the GPLv2.
+ *
+ * Copyright (C) 2006-2008 Intel Corporation
+ * Author: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
+ *
+ */
+
+#ifndef _IOVA_H_
+#define _IOVA_H_
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/rbtree.h>
+#include <linux/dma-mapping.h>
+
+/* IO virtual address start page frame number */
+#define IOVA_START_PFN		(1)
+
+/* iova structure */
+struct iova {
+	struct rb_node	node;
+	unsigned long	pfn_hi; /* IOMMU dish out addr hi */
+	unsigned long	pfn_lo; /* IOMMU dish out addr lo */
+};
+
+/* holds all the iova translations for a domain */
+struct iova_domain {
+	spinlock_t	iova_rbtree_lock; /* Lock to protect update of rbtree */
+	struct rb_root	rbroot;		/* iova domain rbtree root */
+	struct rb_node	*cached32_node; /* Save last alloced node */
+	unsigned long	dma_32bit_pfn;
+};
+
+struct iova *alloc_iova_mem(void);
+void free_iova_mem(struct iova *iova);
+void free_iova(struct iova_domain *iovad, unsigned long pfn);
+void __free_iova(struct iova_domain *iovad, struct iova *iova);
+struct iova *alloc_iova(struct iova_domain *iovad, unsigned long size,
+	unsigned long limit_pfn,
+	bool size_aligned);
+struct iova *reserve_iova(struct iova_domain *iovad, unsigned long pfn_lo,
+	unsigned long pfn_hi);
+void copy_reserved_iova(struct iova_domain *from, struct iova_domain *to);
+void init_iova_domain(struct iova_domain *iovad, unsigned long pfn_32bit);
+struct iova *find_iova(struct iova_domain *iovad, unsigned long pfn);
+void put_iova_domain(struct iova_domain *iovad);
+
+#endif
diff --git a/include/linux/ip.h b/include/linux/ip.h
new file mode 100644
index 00000000..bd0a2a86
--- /dev/null
+++ b/include/linux/ip.h
@@ -0,0 +1,149 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the IP protocol.
+ *
+ * Version:	@(#)ip.h	1.0.2	04/28/93
+ *
+ * Authors:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_IP_H
+#define _LINUX_IP_H
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#define IPTOS_TOS_MASK		0x1E
+#define IPTOS_TOS(tos)		((tos)&IPTOS_TOS_MASK)
+#define	IPTOS_LOWDELAY		0x10
+#define	IPTOS_THROUGHPUT	0x08
+#define	IPTOS_RELIABILITY	0x04
+#define	IPTOS_MINCOST		0x02
+
+#define IPTOS_PREC_MASK		0xE0
+#define IPTOS_PREC(tos)		((tos)&IPTOS_PREC_MASK)
+#define IPTOS_PREC_NETCONTROL           0xe0
+#define IPTOS_PREC_INTERNETCONTROL      0xc0
+#define IPTOS_PREC_CRITIC_ECP           0xa0
+#define IPTOS_PREC_FLASHOVERRIDE        0x80
+#define IPTOS_PREC_FLASH                0x60
+#define IPTOS_PREC_IMMEDIATE            0x40
+#define IPTOS_PREC_PRIORITY             0x20
+#define IPTOS_PREC_ROUTINE              0x00
+
+
+/* IP options */
+#define IPOPT_COPY		0x80
+#define IPOPT_CLASS_MASK	0x60
+#define IPOPT_NUMBER_MASK	0x1f
+
+#define	IPOPT_COPIED(o)		((o)&IPOPT_COPY)
+#define	IPOPT_CLASS(o)		((o)&IPOPT_CLASS_MASK)
+#define	IPOPT_NUMBER(o)		((o)&IPOPT_NUMBER_MASK)
+
+#define	IPOPT_CONTROL		0x00
+#define	IPOPT_RESERVED1		0x20
+#define	IPOPT_MEASUREMENT	0x40
+#define	IPOPT_RESERVED2		0x60
+
+#define IPOPT_END	(0 |IPOPT_CONTROL)
+#define IPOPT_NOOP	(1 |IPOPT_CONTROL)
+#define IPOPT_SEC	(2 |IPOPT_CONTROL|IPOPT_COPY)
+#define IPOPT_LSRR	(3 |IPOPT_CONTROL|IPOPT_COPY)
+#define IPOPT_TIMESTAMP	(4 |IPOPT_MEASUREMENT)
+#define IPOPT_CIPSO	(6 |IPOPT_CONTROL|IPOPT_COPY)
+#define IPOPT_RR	(7 |IPOPT_CONTROL)
+#define IPOPT_SID	(8 |IPOPT_CONTROL|IPOPT_COPY)
+#define IPOPT_SSRR	(9 |IPOPT_CONTROL|IPOPT_COPY)
+#define IPOPT_RA	(20|IPOPT_CONTROL|IPOPT_COPY)
+
+#define IPVERSION	4
+#define MAXTTL		255
+#define IPDEFTTL	64
+
+#define IPOPT_OPTVAL 0
+#define IPOPT_OLEN   1
+#define IPOPT_OFFSET 2
+#define IPOPT_MINOFF 4
+#define MAX_IPOPTLEN 40
+#define IPOPT_NOP IPOPT_NOOP
+#define IPOPT_EOL IPOPT_END
+#define IPOPT_TS  IPOPT_TIMESTAMP
+
+#define	IPOPT_TS_TSONLY		0		/* timestamps only */
+#define	IPOPT_TS_TSANDADDR	1		/* timestamps and addresses */
+#define	IPOPT_TS_PRESPEC	3		/* specified modules only */
+
+#define IPV4_BEET_PHMAXLEN 8
+
+struct iphdr {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8	ihl:4,
+		version:4;
+#elif defined (__BIG_ENDIAN_BITFIELD)
+	__u8	version:4,
+  		ihl:4;
+#else
+#error	"Please fix <asm/byteorder.h>"
+#endif
+	__u8	tos;
+	__be16	tot_len;
+	__be16	id;
+	__be16	frag_off;
+	__u8	ttl;
+	__u8	protocol;
+	__sum16	check;
+	__be32	saddr;
+	__be32	daddr;
+	/*The options start here. */
+};
+
+#ifdef __KERNEL__
+#include <linux/skbuff.h>
+
+static inline struct iphdr *ip_hdr(const struct sk_buff *skb)
+{
+	return (struct iphdr *)skb_network_header(skb);
+}
+
+static inline struct iphdr *ipip_hdr(const struct sk_buff *skb)
+{
+	return (struct iphdr *)skb_transport_header(skb);
+}
+#endif
+
+struct ip_auth_hdr {
+	__u8  nexthdr;
+	__u8  hdrlen;		/* This one is measured in 32 bit units! */
+	__be16 reserved;
+	__be32 spi;
+	__be32 seq_no;		/* Sequence number */
+	__u8  auth_data[0];	/* Variable len but >=4. Mind the 64 bit alignment! */
+};
+
+struct ip_esp_hdr {
+	__be32 spi;
+	__be32 seq_no;		/* Sequence number */
+	__u8  enc_data[0];	/* Variable len but >=8. Mind the 64 bit alignment! */
+};
+
+struct ip_comp_hdr {
+	__u8 nexthdr;
+	__u8 flags;
+	__be16 cpi;
+};
+
+struct ip_beet_phdr {
+	__u8 nexthdr;
+	__u8 hdrlen;
+	__u8 padlen;
+	__u8 reserved;
+};
+
+#endif	/* _LINUX_IP_H */
diff --git a/include/linux/ip6_tunnel.h b/include/linux/ip6_tunnel.h
new file mode 100644
index 00000000..bf22b031
--- /dev/null
+++ b/include/linux/ip6_tunnel.h
@@ -0,0 +1,34 @@
+#ifndef _IP6_TUNNEL_H
+#define _IP6_TUNNEL_H
+
+#include <linux/types.h>
+
+#define IPV6_TLV_TNL_ENCAP_LIMIT 4
+#define IPV6_DEFAULT_TNL_ENCAP_LIMIT 4
+
+/* don't add encapsulation limit if one isn't present in inner packet */
+#define IP6_TNL_F_IGN_ENCAP_LIMIT 0x1
+/* copy the traffic class field from the inner packet */
+#define IP6_TNL_F_USE_ORIG_TCLASS 0x2
+/* copy the flowlabel from the inner packet */
+#define IP6_TNL_F_USE_ORIG_FLOWLABEL 0x4
+/* being used for Mobile IPv6 */
+#define IP6_TNL_F_MIP6_DEV 0x8
+/* copy DSCP from the outer packet */
+#define IP6_TNL_F_RCV_DSCP_COPY 0x10
+/* copy fwmark from inner packet */
+#define IP6_TNL_F_USE_ORIG_FWMARK 0x20
+
+struct ip6_tnl_parm {
+	char name[IFNAMSIZ];	/* name of tunnel device */
+	int link;		/* ifindex of underlying L2 interface */
+	__u8 proto;		/* tunnel protocol */
+	__u8 encap_limit;	/* encapsulation limit for tunnel */
+	__u8 hop_limit;		/* hop limit for tunnel */
+	__be32 flowinfo;	/* traffic class and flowlabel for tunnel */
+	__u32 flags;		/* tunnel flags */
+	struct in6_addr laddr;	/* local tunnel end-point address */
+	struct in6_addr raddr;	/* remote tunnel end-point address */
+};
+
+#endif
diff --git a/include/linux/ip_vs.h b/include/linux/ip_vs.h
new file mode 100644
index 00000000..4deb3834
--- /dev/null
+++ b/include/linux/ip_vs.h
@@ -0,0 +1,429 @@
+/*
+ *      IP Virtual Server
+ *      data structure and functionality definitions
+ */
+
+#ifndef _IP_VS_H
+#define _IP_VS_H
+
+#include <linux/types.h>	/* For __beXX types in userland */
+
+#define IP_VS_VERSION_CODE	0x010201
+#define NVERSION(version)			\
+	(version >> 16) & 0xFF,			\
+	(version >> 8) & 0xFF,			\
+	version & 0xFF
+
+/*
+ *      Virtual Service Flags
+ */
+#define IP_VS_SVC_F_PERSISTENT	0x0001		/* persistent port */
+#define IP_VS_SVC_F_HASHED	0x0002		/* hashed entry */
+#define IP_VS_SVC_F_ONEPACKET	0x0004		/* one-packet scheduling */
+
+/*
+ *      Destination Server Flags
+ */
+#define IP_VS_DEST_F_AVAILABLE	0x0001		/* server is available */
+#define IP_VS_DEST_F_OVERLOAD	0x0002		/* server is overloaded */
+
+/*
+ *      IPVS sync daemon states
+ */
+#define IP_VS_STATE_NONE	0x0000		/* daemon is stopped */
+#define IP_VS_STATE_MASTER	0x0001		/* started as master */
+#define IP_VS_STATE_BACKUP	0x0002		/* started as backup */
+
+/*
+ *      IPVS socket options
+ */
+#define IP_VS_BASE_CTL		(64+1024+64)		/* base */
+
+#define IP_VS_SO_SET_NONE	IP_VS_BASE_CTL		/* just peek */
+#define IP_VS_SO_SET_INSERT	(IP_VS_BASE_CTL+1)
+#define IP_VS_SO_SET_ADD	(IP_VS_BASE_CTL+2)
+#define IP_VS_SO_SET_EDIT	(IP_VS_BASE_CTL+3)
+#define IP_VS_SO_SET_DEL	(IP_VS_BASE_CTL+4)
+#define IP_VS_SO_SET_FLUSH	(IP_VS_BASE_CTL+5)
+#define IP_VS_SO_SET_LIST	(IP_VS_BASE_CTL+6)
+#define IP_VS_SO_SET_ADDDEST	(IP_VS_BASE_CTL+7)
+#define IP_VS_SO_SET_DELDEST	(IP_VS_BASE_CTL+8)
+#define IP_VS_SO_SET_EDITDEST	(IP_VS_BASE_CTL+9)
+#define IP_VS_SO_SET_TIMEOUT	(IP_VS_BASE_CTL+10)
+#define IP_VS_SO_SET_STARTDAEMON (IP_VS_BASE_CTL+11)
+#define IP_VS_SO_SET_STOPDAEMON (IP_VS_BASE_CTL+12)
+#define IP_VS_SO_SET_RESTORE    (IP_VS_BASE_CTL+13)
+#define IP_VS_SO_SET_SAVE       (IP_VS_BASE_CTL+14)
+#define IP_VS_SO_SET_ZERO	(IP_VS_BASE_CTL+15)
+#define IP_VS_SO_SET_MAX	IP_VS_SO_SET_ZERO
+
+#define IP_VS_SO_GET_VERSION	IP_VS_BASE_CTL
+#define IP_VS_SO_GET_INFO	(IP_VS_BASE_CTL+1)
+#define IP_VS_SO_GET_SERVICES	(IP_VS_BASE_CTL+2)
+#define IP_VS_SO_GET_SERVICE	(IP_VS_BASE_CTL+3)
+#define IP_VS_SO_GET_DESTS	(IP_VS_BASE_CTL+4)
+#define IP_VS_SO_GET_DEST	(IP_VS_BASE_CTL+5)	/* not used now */
+#define IP_VS_SO_GET_TIMEOUT	(IP_VS_BASE_CTL+6)
+#define IP_VS_SO_GET_DAEMON	(IP_VS_BASE_CTL+7)
+#define IP_VS_SO_GET_MAX	IP_VS_SO_GET_DAEMON
+
+
+/*
+ *      IPVS Connection Flags
+ *      Only flags 0..15 are sent to backup server
+ */
+#define IP_VS_CONN_F_FWD_MASK	0x0007		/* mask for the fwd methods */
+#define IP_VS_CONN_F_MASQ	0x0000		/* masquerading/NAT */
+#define IP_VS_CONN_F_LOCALNODE	0x0001		/* local node */
+#define IP_VS_CONN_F_TUNNEL	0x0002		/* tunneling */
+#define IP_VS_CONN_F_DROUTE	0x0003		/* direct routing */
+#define IP_VS_CONN_F_BYPASS	0x0004		/* cache bypass */
+#define IP_VS_CONN_F_SYNC	0x0020		/* entry created by sync */
+#define IP_VS_CONN_F_HASHED	0x0040		/* hashed entry */
+#define IP_VS_CONN_F_NOOUTPUT	0x0080		/* no output packets */
+#define IP_VS_CONN_F_INACTIVE	0x0100		/* not established */
+#define IP_VS_CONN_F_OUT_SEQ	0x0200		/* must do output seq adjust */
+#define IP_VS_CONN_F_IN_SEQ	0x0400		/* must do input seq adjust */
+#define IP_VS_CONN_F_SEQ_MASK	0x0600		/* in/out sequence mask */
+#define IP_VS_CONN_F_NO_CPORT	0x0800		/* no client port set yet */
+#define IP_VS_CONN_F_TEMPLATE	0x1000		/* template, not connection */
+#define IP_VS_CONN_F_ONE_PACKET	0x2000		/* forward only one packet */
+
+#define IP_VS_CONN_F_BACKUP_MASK (IP_VS_CONN_F_FWD_MASK | \
+				  IP_VS_CONN_F_NOOUTPUT | \
+				  IP_VS_CONN_F_INACTIVE | \
+				  IP_VS_CONN_F_SEQ_MASK | \
+				  IP_VS_CONN_F_NO_CPORT | \
+				  IP_VS_CONN_F_TEMPLATE \
+				 )
+
+/* Flags that are not sent to backup server start from bit 16 */
+#define IP_VS_CONN_F_NFCT	(1 << 16)	/* use netfilter conntrack */
+
+/* Connection flags from destination that can be changed by user space */
+#define IP_VS_CONN_F_DEST_MASK (IP_VS_CONN_F_FWD_MASK | \
+				IP_VS_CONN_F_ONE_PACKET | \
+				IP_VS_CONN_F_NFCT | \
+				0)
+
+#define IP_VS_SCHEDNAME_MAXLEN	16
+#define IP_VS_PENAME_MAXLEN	16
+#define IP_VS_IFNAME_MAXLEN	16
+
+#define IP_VS_PEDATA_MAXLEN     255
+
+/*
+ *	The struct ip_vs_service_user and struct ip_vs_dest_user are
+ *	used to set IPVS rules through setsockopt.
+ */
+struct ip_vs_service_user {
+	/* virtual service addresses */
+	__u16		protocol;
+	__be32			addr;		/* virtual ip address */
+	__be16			port;
+	__u32		fwmark;		/* firwall mark of service */
+
+	/* virtual service options */
+	char			sched_name[IP_VS_SCHEDNAME_MAXLEN];
+	unsigned		flags;		/* virtual service flags */
+	unsigned		timeout;	/* persistent timeout in sec */
+	__be32			netmask;	/* persistent netmask */
+};
+
+
+struct ip_vs_dest_user {
+	/* destination server address */
+	__be32			addr;
+	__be16			port;
+
+	/* real server options */
+	unsigned		conn_flags;	/* connection flags */
+	int			weight;		/* destination weight */
+
+	/* thresholds for active connections */
+	__u32		u_threshold;	/* upper threshold */
+	__u32		l_threshold;	/* lower threshold */
+};
+
+
+/*
+ *	IPVS statistics object (for user space)
+ */
+struct ip_vs_stats_user {
+	__u32                   conns;          /* connections scheduled */
+	__u32                   inpkts;         /* incoming packets */
+	__u32                   outpkts;        /* outgoing packets */
+	__u64                   inbytes;        /* incoming bytes */
+	__u64                   outbytes;       /* outgoing bytes */
+
+	__u32			cps;		/* current connection rate */
+	__u32			inpps;		/* current in packet rate */
+	__u32			outpps;		/* current out packet rate */
+	__u32			inbps;		/* current in byte rate */
+	__u32			outbps;		/* current out byte rate */
+};
+
+
+/* The argument to IP_VS_SO_GET_INFO */
+struct ip_vs_getinfo {
+	/* version number */
+	unsigned int		version;
+
+	/* size of connection hash table */
+	unsigned int		size;
+
+	/* number of virtual services */
+	unsigned int		num_services;
+};
+
+
+/* The argument to IP_VS_SO_GET_SERVICE */
+struct ip_vs_service_entry {
+	/* which service: user fills in these */
+	__u16		protocol;
+	__be32			addr;		/* virtual address */
+	__be16			port;
+	__u32		fwmark;		/* firwall mark of service */
+
+	/* service options */
+	char			sched_name[IP_VS_SCHEDNAME_MAXLEN];
+	unsigned		flags;          /* virtual service flags */
+	unsigned		timeout;	/* persistent timeout */
+	__be32			netmask;	/* persistent netmask */
+
+	/* number of real servers */
+	unsigned int		num_dests;
+
+	/* statistics */
+	struct ip_vs_stats_user stats;
+};
+
+
+struct ip_vs_dest_entry {
+	__be32			addr;		/* destination address */
+	__be16			port;
+	unsigned		conn_flags;	/* connection flags */
+	int			weight;		/* destination weight */
+
+	__u32		u_threshold;	/* upper threshold */
+	__u32		l_threshold;	/* lower threshold */
+
+	__u32		activeconns;	/* active connections */
+	__u32		inactconns;	/* inactive connections */
+	__u32		persistconns;	/* persistent connections */
+
+	/* statistics */
+	struct ip_vs_stats_user stats;
+};
+
+
+/* The argument to IP_VS_SO_GET_DESTS */
+struct ip_vs_get_dests {
+	/* which service: user fills in these */
+	__u16		protocol;
+	__be32			addr;		/* virtual address */
+	__be16			port;
+	__u32		fwmark;		/* firwall mark of service */
+
+	/* number of real servers */
+	unsigned int		num_dests;
+
+	/* the real servers */
+	struct ip_vs_dest_entry	entrytable[0];
+};
+
+
+/* The argument to IP_VS_SO_GET_SERVICES */
+struct ip_vs_get_services {
+	/* number of virtual services */
+	unsigned int		num_services;
+
+	/* service table */
+	struct ip_vs_service_entry entrytable[0];
+};
+
+
+/* The argument to IP_VS_SO_GET_TIMEOUT */
+struct ip_vs_timeout_user {
+	int			tcp_timeout;
+	int			tcp_fin_timeout;
+	int			udp_timeout;
+};
+
+
+/* The argument to IP_VS_SO_GET_DAEMON */
+struct ip_vs_daemon_user {
+	/* sync daemon state (master/backup) */
+	int			state;
+
+	/* multicast interface name */
+	char			mcast_ifn[IP_VS_IFNAME_MAXLEN];
+
+	/* SyncID we belong to */
+	int			syncid;
+};
+
+/*
+ *
+ * IPVS Generic Netlink interface definitions
+ *
+ */
+
+/* Generic Netlink family info */
+
+#define IPVS_GENL_NAME		"IPVS"
+#define IPVS_GENL_VERSION	0x1
+
+struct ip_vs_flags {
+	__be32 flags;
+	__be32 mask;
+};
+
+/* Generic Netlink command attributes */
+enum {
+	IPVS_CMD_UNSPEC = 0,
+
+	IPVS_CMD_NEW_SERVICE,		/* add service */
+	IPVS_CMD_SET_SERVICE,		/* modify service */
+	IPVS_CMD_DEL_SERVICE,		/* delete service */
+	IPVS_CMD_GET_SERVICE,		/* get service info */
+
+	IPVS_CMD_NEW_DEST,		/* add destination */
+	IPVS_CMD_SET_DEST,		/* modify destination */
+	IPVS_CMD_DEL_DEST,		/* delete destination */
+	IPVS_CMD_GET_DEST,		/* get destination info */
+
+	IPVS_CMD_NEW_DAEMON,		/* start sync daemon */
+	IPVS_CMD_DEL_DAEMON,		/* stop sync daemon */
+	IPVS_CMD_GET_DAEMON,		/* get sync daemon status */
+
+	IPVS_CMD_SET_CONFIG,		/* set config settings */
+	IPVS_CMD_GET_CONFIG,		/* get config settings */
+
+	IPVS_CMD_SET_INFO,		/* only used in GET_INFO reply */
+	IPVS_CMD_GET_INFO,		/* get general IPVS info */
+
+	IPVS_CMD_ZERO,			/* zero all counters and stats */
+	IPVS_CMD_FLUSH,			/* flush services and dests */
+
+	__IPVS_CMD_MAX,
+};
+
+#define IPVS_CMD_MAX (__IPVS_CMD_MAX - 1)
+
+/* Attributes used in the first level of commands */
+enum {
+	IPVS_CMD_ATTR_UNSPEC = 0,
+	IPVS_CMD_ATTR_SERVICE,		/* nested service attribute */
+	IPVS_CMD_ATTR_DEST,		/* nested destination attribute */
+	IPVS_CMD_ATTR_DAEMON,		/* nested sync daemon attribute */
+	IPVS_CMD_ATTR_TIMEOUT_TCP,	/* TCP connection timeout */
+	IPVS_CMD_ATTR_TIMEOUT_TCP_FIN,	/* TCP FIN wait timeout */
+	IPVS_CMD_ATTR_TIMEOUT_UDP,	/* UDP timeout */
+	__IPVS_CMD_ATTR_MAX,
+};
+
+#define IPVS_CMD_ATTR_MAX (__IPVS_SVC_ATTR_MAX - 1)
+
+/*
+ * Attributes used to describe a service
+ *
+ * Used inside nested attribute IPVS_CMD_ATTR_SERVICE
+ */
+enum {
+	IPVS_SVC_ATTR_UNSPEC = 0,
+	IPVS_SVC_ATTR_AF,		/* address family */
+	IPVS_SVC_ATTR_PROTOCOL,		/* virtual service protocol */
+	IPVS_SVC_ATTR_ADDR,		/* virtual service address */
+	IPVS_SVC_ATTR_PORT,		/* virtual service port */
+	IPVS_SVC_ATTR_FWMARK,		/* firewall mark of service */
+
+	IPVS_SVC_ATTR_SCHED_NAME,	/* name of scheduler */
+	IPVS_SVC_ATTR_FLAGS,		/* virtual service flags */
+	IPVS_SVC_ATTR_TIMEOUT,		/* persistent timeout */
+	IPVS_SVC_ATTR_NETMASK,		/* persistent netmask */
+
+	IPVS_SVC_ATTR_STATS,		/* nested attribute for service stats */
+
+	IPVS_SVC_ATTR_PE_NAME,		/* name of ct retriever */
+
+	__IPVS_SVC_ATTR_MAX,
+};
+
+#define IPVS_SVC_ATTR_MAX (__IPVS_SVC_ATTR_MAX - 1)
+
+/*
+ * Attributes used to describe a destination (real server)
+ *
+ * Used inside nested attribute IPVS_CMD_ATTR_DEST
+ */
+enum {
+	IPVS_DEST_ATTR_UNSPEC = 0,
+	IPVS_DEST_ATTR_ADDR,		/* real server address */
+	IPVS_DEST_ATTR_PORT,		/* real server port */
+
+	IPVS_DEST_ATTR_FWD_METHOD,	/* forwarding method */
+	IPVS_DEST_ATTR_WEIGHT,		/* destination weight */
+
+	IPVS_DEST_ATTR_U_THRESH,	/* upper threshold */
+	IPVS_DEST_ATTR_L_THRESH,	/* lower threshold */
+
+	IPVS_DEST_ATTR_ACTIVE_CONNS,	/* active connections */
+	IPVS_DEST_ATTR_INACT_CONNS,	/* inactive connections */
+	IPVS_DEST_ATTR_PERSIST_CONNS,	/* persistent connections */
+
+	IPVS_DEST_ATTR_STATS,		/* nested attribute for dest stats */
+	__IPVS_DEST_ATTR_MAX,
+};
+
+#define IPVS_DEST_ATTR_MAX (__IPVS_DEST_ATTR_MAX - 1)
+
+/*
+ * Attributes describing a sync daemon
+ *
+ * Used inside nested attribute IPVS_CMD_ATTR_DAEMON
+ */
+enum {
+	IPVS_DAEMON_ATTR_UNSPEC = 0,
+	IPVS_DAEMON_ATTR_STATE,		/* sync daemon state (master/backup) */
+	IPVS_DAEMON_ATTR_MCAST_IFN,	/* multicast interface name */
+	IPVS_DAEMON_ATTR_SYNC_ID,	/* SyncID we belong to */
+	__IPVS_DAEMON_ATTR_MAX,
+};
+
+#define IPVS_DAEMON_ATTR_MAX (__IPVS_DAEMON_ATTR_MAX - 1)
+
+/*
+ * Attributes used to describe service or destination entry statistics
+ *
+ * Used inside nested attributes IPVS_SVC_ATTR_STATS and IPVS_DEST_ATTR_STATS
+ */
+enum {
+	IPVS_STATS_ATTR_UNSPEC = 0,
+	IPVS_STATS_ATTR_CONNS,		/* connections scheduled */
+	IPVS_STATS_ATTR_INPKTS,		/* incoming packets */
+	IPVS_STATS_ATTR_OUTPKTS,	/* outgoing packets */
+	IPVS_STATS_ATTR_INBYTES,	/* incoming bytes */
+	IPVS_STATS_ATTR_OUTBYTES,	/* outgoing bytes */
+
+	IPVS_STATS_ATTR_CPS,		/* current connection rate */
+	IPVS_STATS_ATTR_INPPS,		/* current in packet rate */
+	IPVS_STATS_ATTR_OUTPPS,		/* current out packet rate */
+	IPVS_STATS_ATTR_INBPS,		/* current in byte rate */
+	IPVS_STATS_ATTR_OUTBPS,		/* current out byte rate */
+	__IPVS_STATS_ATTR_MAX,
+};
+
+#define IPVS_STATS_ATTR_MAX (__IPVS_STATS_ATTR_MAX - 1)
+
+/* Attributes used in response to IPVS_CMD_GET_INFO command */
+enum {
+	IPVS_INFO_ATTR_UNSPEC = 0,
+	IPVS_INFO_ATTR_VERSION,		/* IPVS version number */
+	IPVS_INFO_ATTR_CONN_TAB_SIZE,	/* size of connection hash table */
+	__IPVS_INFO_ATTR_MAX,
+};
+
+#define IPVS_INFO_ATTR_MAX (__IPVS_INFO_ATTR_MAX - 1)
+
+#endif	/* _IP_VS_H */
diff --git a/include/linux/ipc.h b/include/linux/ipc.h
new file mode 100644
index 00000000..30e81614
--- /dev/null
+++ b/include/linux/ipc.h
@@ -0,0 +1,103 @@
+#ifndef _LINUX_IPC_H
+#define _LINUX_IPC_H
+
+#include <linux/types.h>
+
+#define IPC_PRIVATE ((__kernel_key_t) 0)  
+
+/* Obsolete, used only for backwards compatibility and libc5 compiles */
+struct ipc_perm
+{
+	__kernel_key_t	key;
+	__kernel_uid_t	uid;
+	__kernel_gid_t	gid;
+	__kernel_uid_t	cuid;
+	__kernel_gid_t	cgid;
+	__kernel_mode_t	mode; 
+	unsigned short	seq;
+};
+
+/* Include the definition of ipc64_perm */
+#include <asm/ipcbuf.h>
+
+/* resource get request flags */
+#define IPC_CREAT  00001000   /* create if key is nonexistent */
+#define IPC_EXCL   00002000   /* fail if key exists */
+#define IPC_NOWAIT 00004000   /* return error on wait */
+
+/* these fields are used by the DIPC package so the kernel as standard
+   should avoid using them if possible */
+   
+#define IPC_DIPC 00010000  /* make it distributed */
+#define IPC_OWN  00020000  /* this machine is the DIPC owner */
+
+/* 
+ * Control commands used with semctl, msgctl and shmctl 
+ * see also specific commands in sem.h, msg.h and shm.h
+ */
+#define IPC_RMID 0     /* remove resource */
+#define IPC_SET  1     /* set ipc_perm options */
+#define IPC_STAT 2     /* get ipc_perm options */
+#define IPC_INFO 3     /* see ipcs */
+
+/*
+ * Version flags for semctl, msgctl, and shmctl commands
+ * These are passed as bitflags or-ed with the actual command
+ */
+#define IPC_OLD 0	/* Old version (no 32-bit UID support on many
+			   architectures) */
+#define IPC_64  0x0100  /* New version (support 32-bit UIDs, bigger
+			   message sizes, etc. */
+
+/*
+ * These are used to wrap system calls.
+ *
+ * See architecture code for ugly details..
+ */
+struct ipc_kludge {
+	struct msgbuf __user *msgp;
+	long msgtyp;
+};
+
+#define SEMOP		 1
+#define SEMGET		 2
+#define SEMCTL		 3
+#define SEMTIMEDOP	 4
+#define MSGSND		11
+#define MSGRCV		12
+#define MSGGET		13
+#define MSGCTL		14
+#define SHMAT		21
+#define SHMDT		22
+#define SHMGET		23
+#define SHMCTL		24
+
+/* Used by the DIPC package, try and avoid reusing it */
+#define DIPC            25
+
+#define IPCCALL(version,op)	((version)<<16 | (op))
+
+#ifdef __KERNEL__
+#include <linux/spinlock.h>
+
+#define IPCMNI 32768  /* <= MAX_INT limit for ipc arrays (including sysctl changes) */
+
+/* used by in-kernel data structures */
+struct kern_ipc_perm
+{
+	spinlock_t	lock;
+	int		deleted;
+	int		id;
+	key_t		key;
+	uid_t		uid;
+	gid_t		gid;
+	uid_t		cuid;
+	gid_t		cgid;
+	umode_t		mode; 
+	unsigned long	seq;
+	void		*security;
+};
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_IPC_H */
diff --git a/include/linux/ipc_namespace.h b/include/linux/ipc_namespace.h
new file mode 100644
index 00000000..8a297a5e
--- /dev/null
+++ b/include/linux/ipc_namespace.h
@@ -0,0 +1,146 @@
+#ifndef __IPC_NAMESPACE_H__
+#define __IPC_NAMESPACE_H__
+
+#include <linux/err.h>
+#include <linux/idr.h>
+#include <linux/rwsem.h>
+#include <linux/notifier.h>
+#include <linux/nsproxy.h>
+
+/*
+ * ipc namespace events
+ */
+#define IPCNS_MEMCHANGED   0x00000001   /* Notify lowmem size changed */
+#define IPCNS_CREATED  0x00000002   /* Notify new ipc namespace created */
+#define IPCNS_REMOVED  0x00000003   /* Notify ipc namespace removed */
+
+#define IPCNS_CALLBACK_PRI 0
+
+struct user_namespace;
+
+struct ipc_ids {
+	int in_use;
+	unsigned short seq;
+	unsigned short seq_max;
+	struct rw_semaphore rw_mutex;
+	struct idr ipcs_idr;
+};
+
+struct ipc_namespace {
+	atomic_t	count;
+	struct ipc_ids	ids[3];
+
+	int		sem_ctls[4];
+	int		used_sems;
+
+	int		msg_ctlmax;
+	int		msg_ctlmnb;
+	int		msg_ctlmni;
+	atomic_t	msg_bytes;
+	atomic_t	msg_hdrs;
+	int		auto_msgmni;
+
+	size_t		shm_ctlmax;
+	size_t		shm_ctlall;
+	int		shm_ctlmni;
+	int		shm_tot;
+	/*
+	 * Defines whether IPC_RMID is forced for _all_ shm segments regardless
+	 * of shmctl()
+	 */
+	int		shm_rmid_forced;
+
+	struct notifier_block ipcns_nb;
+
+	/* The kern_mount of the mqueuefs sb.  We take a ref on it */
+	struct vfsmount	*mq_mnt;
+
+	/* # queues in this ns, protected by mq_lock */
+	unsigned int    mq_queues_count;
+
+	/* next fields are set through sysctl */
+	unsigned int    mq_queues_max;   /* initialized to DFLT_QUEUESMAX */
+	unsigned int    mq_msg_max;      /* initialized to DFLT_MSGMAX */
+	unsigned int    mq_msgsize_max;  /* initialized to DFLT_MSGSIZEMAX */
+
+	/* user_ns which owns the ipc ns */
+	struct user_namespace *user_ns;
+};
+
+extern struct ipc_namespace init_ipc_ns;
+extern atomic_t nr_ipc_ns;
+
+extern spinlock_t mq_lock;
+
+#ifdef CONFIG_SYSVIPC
+extern int register_ipcns_notifier(struct ipc_namespace *);
+extern int cond_register_ipcns_notifier(struct ipc_namespace *);
+extern void unregister_ipcns_notifier(struct ipc_namespace *);
+extern int ipcns_notify(unsigned long);
+extern void shm_destroy_orphaned(struct ipc_namespace *ns);
+#else /* CONFIG_SYSVIPC */
+static inline int register_ipcns_notifier(struct ipc_namespace *ns)
+{ return 0; }
+static inline int cond_register_ipcns_notifier(struct ipc_namespace *ns)
+{ return 0; }
+static inline void unregister_ipcns_notifier(struct ipc_namespace *ns) { }
+static inline int ipcns_notify(unsigned long l) { return 0; }
+static inline void shm_destroy_orphaned(struct ipc_namespace *ns) {}
+#endif /* CONFIG_SYSVIPC */
+
+#ifdef CONFIG_POSIX_MQUEUE
+extern int mq_init_ns(struct ipc_namespace *ns);
+/* default values */
+#define DFLT_QUEUESMAX 256     /* max number of message queues */
+#define DFLT_MSGMAX    10      /* max number of messages in each queue */
+#define HARD_MSGMAX    (32768*sizeof(void *)/4)
+#define DFLT_MSGSIZEMAX 8192   /* max message size */
+#else
+static inline int mq_init_ns(struct ipc_namespace *ns) { return 0; }
+#endif
+
+#if defined(CONFIG_IPC_NS)
+extern struct ipc_namespace *copy_ipcs(unsigned long flags,
+				       struct task_struct *tsk);
+static inline struct ipc_namespace *get_ipc_ns(struct ipc_namespace *ns)
+{
+	if (ns)
+		atomic_inc(&ns->count);
+	return ns;
+}
+
+extern void put_ipc_ns(struct ipc_namespace *ns);
+#else
+static inline struct ipc_namespace *copy_ipcs(unsigned long flags,
+					      struct task_struct *tsk)
+{
+	if (flags & CLONE_NEWIPC)
+		return ERR_PTR(-EINVAL);
+
+	return tsk->nsproxy->ipc_ns;
+}
+
+static inline struct ipc_namespace *get_ipc_ns(struct ipc_namespace *ns)
+{
+	return ns;
+}
+
+static inline void put_ipc_ns(struct ipc_namespace *ns)
+{
+}
+#endif
+
+#ifdef CONFIG_POSIX_MQUEUE_SYSCTL
+
+struct ctl_table_header;
+extern struct ctl_table_header *mq_register_sysctl_table(void);
+
+#else /* CONFIG_POSIX_MQUEUE_SYSCTL */
+
+static inline struct ctl_table_header *mq_register_sysctl_table(void)
+{
+	return NULL;
+}
+
+#endif /* CONFIG_POSIX_MQUEUE_SYSCTL */
+#endif
diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h
new file mode 100644
index 00000000..48dcba9b
--- /dev/null
+++ b/include/linux/ipmi.h
@@ -0,0 +1,736 @@
+/*
+ * ipmi.h
+ *
+ * MontaVista IPMI interface
+ *
+ * Author: MontaVista Software, Inc.
+ *         Corey Minyard <minyard@mvista.com>
+ *         source@mvista.com
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_IPMI_H
+#define __LINUX_IPMI_H
+
+#include <linux/ipmi_msgdefs.h>
+#include <linux/compiler.h>
+
+/*
+ * This file describes an interface to an IPMI driver.  You have to
+ * have a fairly good understanding of IPMI to use this, so go read
+ * the specs first before actually trying to do anything.
+ *
+ * With that said, this driver provides a multi-user interface to the
+ * IPMI driver, and it allows multiple IPMI physical interfaces below
+ * the driver.  The physical interfaces bind as a lower layer on the
+ * driver.  They appear as interfaces to the application using this
+ * interface.
+ *
+ * Multi-user means that multiple applications may use the driver,
+ * send commands, receive responses, etc.  The driver keeps track of
+ * commands the user sends and tracks the responses.  The responses
+ * will go back to the application that send the command.  If the
+ * response doesn't come back in time, the driver will return a
+ * timeout error response to the application.  Asynchronous events
+ * from the BMC event queue will go to all users bound to the driver.
+ * The incoming event queue in the BMC will automatically be flushed
+ * if it becomes full and it is queried once a second to see if
+ * anything is in it.  Incoming commands to the driver will get
+ * delivered as commands.
+ *
+ * This driver provides two main interfaces: one for in-kernel
+ * applications and another for userland applications.  The
+ * capabilities are basically the same for both interface, although
+ * the interfaces are somewhat different.  The stuff in the
+ * #ifdef __KERNEL__ below is the in-kernel interface.  The userland
+ * interface is defined later in the file.  */
+
+
+
+/*
+ * This is an overlay for all the address types, so it's easy to
+ * determine the actual address type.  This is kind of like addresses
+ * work for sockets.
+ */
+#define IPMI_MAX_ADDR_SIZE 32
+struct ipmi_addr {
+	 /* Try to take these from the "Channel Medium Type" table
+	    in section 6.5 of the IPMI 1.5 manual. */
+	int   addr_type;
+	short channel;
+	char  data[IPMI_MAX_ADDR_SIZE];
+};
+
+/*
+ * When the address is not used, the type will be set to this value.
+ * The channel is the BMC's channel number for the channel (usually
+ * 0), or IPMC_BMC_CHANNEL if communicating directly with the BMC.
+ */
+#define IPMI_SYSTEM_INTERFACE_ADDR_TYPE	0x0c
+struct ipmi_system_interface_addr {
+	int           addr_type;
+	short         channel;
+	unsigned char lun;
+};
+
+/* An IPMB Address. */
+#define IPMI_IPMB_ADDR_TYPE		0x01
+/* Used for broadcast get device id as described in section 17.9 of the
+   IPMI 1.5 manual. */
+#define IPMI_IPMB_BROADCAST_ADDR_TYPE	0x41
+struct ipmi_ipmb_addr {
+	int           addr_type;
+	short         channel;
+	unsigned char slave_addr;
+	unsigned char lun;
+};
+
+/*
+ * A LAN Address.  This is an address to/from a LAN interface bridged
+ * by the BMC, not an address actually out on the LAN.
+ *
+ * A conscious decision was made here to deviate slightly from the IPMI
+ * spec.  We do not use rqSWID and rsSWID like it shows in the
+ * message.  Instead, we use remote_SWID and local_SWID.  This means
+ * that any message (a request or response) from another device will
+ * always have exactly the same address.  If you didn't do this,
+ * requests and responses from the same device would have different
+ * addresses, and that's not too cool.
+ *
+ * In this address, the remote_SWID is always the SWID the remote
+ * message came from, or the SWID we are sending the message to.
+ * local_SWID is always our SWID.  Note that having our SWID in the
+ * message is a little weird, but this is required.
+ */
+#define IPMI_LAN_ADDR_TYPE		0x04
+struct ipmi_lan_addr {
+	int           addr_type;
+	short         channel;
+	unsigned char privilege;
+	unsigned char session_handle;
+	unsigned char remote_SWID;
+	unsigned char local_SWID;
+	unsigned char lun;
+};
+
+
+/*
+ * Channel for talking directly with the BMC.  When using this
+ * channel, This is for the system interface address type only.  FIXME
+ * - is this right, or should we use -1?
+ */
+#define IPMI_BMC_CHANNEL  0xf
+#define IPMI_NUM_CHANNELS 0x10
+
+/*
+ * Used to signify an "all channel" bitmask.  This is more than the
+ * actual number of channels because this is used in userland and
+ * will cover us if the number of channels is extended.
+ */
+#define IPMI_CHAN_ALL     (~0)
+
+
+/*
+ * A raw IPMI message without any addressing.  This covers both
+ * commands and responses.  The completion code is always the first
+ * byte of data in the response (as the spec shows the messages laid
+ * out).
+ */
+struct ipmi_msg {
+	unsigned char  netfn;
+	unsigned char  cmd;
+	unsigned short data_len;
+	unsigned char  __user *data;
+};
+
+struct kernel_ipmi_msg {
+	unsigned char  netfn;
+	unsigned char  cmd;
+	unsigned short data_len;
+	unsigned char  *data;
+};
+
+/*
+ * Various defines that are useful for IPMI applications.
+ */
+#define IPMI_INVALID_CMD_COMPLETION_CODE	0xC1
+#define IPMI_TIMEOUT_COMPLETION_CODE		0xC3
+#define IPMI_UNKNOWN_ERR_COMPLETION_CODE	0xff
+
+
+/*
+ * Receive types for messages coming from the receive interface.  This
+ * is used for the receive in-kernel interface and in the receive
+ * IOCTL.
+ *
+ * The "IPMI_RESPONSE_RESPNOSE_TYPE" is a little strange sounding, but
+ * it allows you to get the message results when you send a response
+ * message.
+ */
+#define IPMI_RESPONSE_RECV_TYPE		1 /* A response to a command */
+#define IPMI_ASYNC_EVENT_RECV_TYPE	2 /* Something from the event queue */
+#define IPMI_CMD_RECV_TYPE		3 /* A command from somewhere else */
+#define IPMI_RESPONSE_RESPONSE_TYPE	4 /* The response for
+					      a sent response, giving any
+					      error status for sending the
+					      response.  When you send a
+					      response message, this will
+					      be returned. */
+#define IPMI_OEM_RECV_TYPE		5 /* The response for OEM Channels */
+
+/* Note that async events and received commands do not have a completion
+   code as the first byte of the incoming data, unlike a response. */
+
+
+/*
+ * Modes for ipmi_set_maint_mode() and the userland IOCTL.  The AUTO
+ * setting is the default and means it will be set on certain
+ * commands.  Hard setting it on and off will override automatic
+ * operation.
+ */
+#define IPMI_MAINTENANCE_MODE_AUTO	0
+#define IPMI_MAINTENANCE_MODE_OFF	1
+#define IPMI_MAINTENANCE_MODE_ON	2
+
+#ifdef __KERNEL__
+
+/*
+ * The in-kernel interface.
+ */
+#include <linux/list.h>
+#include <linux/proc_fs.h>
+
+struct module;
+struct device;
+
+/* Opaque type for a IPMI message user.  One of these is needed to
+   send and receive messages. */
+typedef struct ipmi_user *ipmi_user_t;
+
+/*
+ * Stuff coming from the receive interface comes as one of these.
+ * They are allocated, the receiver must free them with
+ * ipmi_free_recv_msg() when done with the message.  The link is not
+ * used after the message is delivered, so the upper layer may use the
+ * link to build a linked list, if it likes.
+ */
+struct ipmi_recv_msg {
+	struct list_head link;
+
+	/* The type of message as defined in the "Receive Types"
+	   defines above. */
+	int              recv_type;
+
+	ipmi_user_t      user;
+	struct ipmi_addr addr;
+	long             msgid;
+	struct kernel_ipmi_msg  msg;
+
+	/* The user_msg_data is the data supplied when a message was
+	   sent, if this is a response to a sent message.  If this is
+	   not a response to a sent message, then user_msg_data will
+	   be NULL.  If the user above is NULL, then this will be the
+	   intf. */
+	void             *user_msg_data;
+
+	/* Call this when done with the message.  It will presumably free
+	   the message and do any other necessary cleanup. */
+	void (*done)(struct ipmi_recv_msg *msg);
+
+	/* Place-holder for the data, don't make any assumptions about
+	   the size or existence of this, since it may change. */
+	unsigned char   msg_data[IPMI_MAX_MSG_LENGTH];
+};
+
+/* Allocate and free the receive message. */
+void ipmi_free_recv_msg(struct ipmi_recv_msg *msg);
+
+struct ipmi_user_hndl {
+	/* Routine type to call when a message needs to be routed to
+	   the upper layer.  This will be called with some locks held,
+	   the only IPMI routines that can be called are ipmi_request
+	   and the alloc/free operations.  The handler_data is the
+	   variable supplied when the receive handler was registered. */
+	void (*ipmi_recv_hndl)(struct ipmi_recv_msg *msg,
+			       void                 *user_msg_data);
+
+	/* Called when the interface detects a watchdog pre-timeout.  If
+	   this is NULL, it will be ignored for the user. */
+	void (*ipmi_watchdog_pretimeout)(void *handler_data);
+};
+
+/* Create a new user of the IPMI layer on the given interface number. */
+int ipmi_create_user(unsigned int          if_num,
+		     struct ipmi_user_hndl *handler,
+		     void                  *handler_data,
+		     ipmi_user_t           *user);
+
+/* Destroy the given user of the IPMI layer.  Note that after this
+   function returns, the system is guaranteed to not call any
+   callbacks for the user.  Thus as long as you destroy all the users
+   before you unload a module, you will be safe.  And if you destroy
+   the users before you destroy the callback structures, it should be
+   safe, too. */
+int ipmi_destroy_user(ipmi_user_t user);
+
+/* Get the IPMI version of the BMC we are talking to. */
+void ipmi_get_version(ipmi_user_t   user,
+		      unsigned char *major,
+		      unsigned char *minor);
+
+/* Set and get the slave address and LUN that we will use for our
+   source messages.  Note that this affects the interface, not just
+   this user, so it will affect all users of this interface.  This is
+   so some initialization code can come in and do the OEM-specific
+   things it takes to determine your address (if not the BMC) and set
+   it for everyone else.  Note that each channel can have its own address. */
+int ipmi_set_my_address(ipmi_user_t   user,
+			unsigned int  channel,
+			unsigned char address);
+int ipmi_get_my_address(ipmi_user_t   user,
+			unsigned int  channel,
+			unsigned char *address);
+int ipmi_set_my_LUN(ipmi_user_t   user,
+		    unsigned int  channel,
+		    unsigned char LUN);
+int ipmi_get_my_LUN(ipmi_user_t   user,
+		    unsigned int  channel,
+		    unsigned char *LUN);
+
+/*
+ * Like ipmi_request, but lets you specify the number of retries and
+ * the retry time.  The retries is the number of times the message
+ * will be resent if no reply is received.  If set to -1, the default
+ * value will be used.  The retry time is the time in milliseconds
+ * between retries.  If set to zero, the default value will be
+ * used.
+ *
+ * Don't use this unless you *really* have to.  It's primarily for the
+ * IPMI over LAN converter; since the LAN stuff does its own retries,
+ * it makes no sense to do it here.  However, this can be used if you
+ * have unusual requirements.
+ */
+int ipmi_request_settime(ipmi_user_t      user,
+			 struct ipmi_addr *addr,
+			 long             msgid,
+			 struct kernel_ipmi_msg  *msg,
+			 void             *user_msg_data,
+			 int              priority,
+			 int              max_retries,
+			 unsigned int     retry_time_ms);
+
+/*
+ * Like ipmi_request, but with messages supplied.  This will not
+ * allocate any memory, and the messages may be statically allocated
+ * (just make sure to do the "done" handling on them).  Note that this
+ * is primarily for the watchdog timer, since it should be able to
+ * send messages even if no memory is available.  This is subject to
+ * change as the system changes, so don't use it unless you REALLY
+ * have to.
+ */
+int ipmi_request_supply_msgs(ipmi_user_t          user,
+			     struct ipmi_addr     *addr,
+			     long                 msgid,
+			     struct kernel_ipmi_msg *msg,
+			     void                 *user_msg_data,
+			     void                 *supplied_smi,
+			     struct ipmi_recv_msg *supplied_recv,
+			     int                  priority);
+
+/*
+ * Poll the IPMI interface for the user.  This causes the IPMI code to
+ * do an immediate check for information from the driver and handle
+ * anything that is immediately pending.  This will not block in any
+ * way.  This is useful if you need to spin waiting for something to
+ * happen in the IPMI driver.
+ */
+void ipmi_poll_interface(ipmi_user_t user);
+
+/*
+ * When commands come in to the SMS, the user can register to receive
+ * them.  Only one user can be listening on a specific netfn/cmd/chan tuple
+ * at a time, you will get an EBUSY error if the command is already
+ * registered.  If a command is received that does not have a user
+ * registered, the driver will automatically return the proper
+ * error.  Channels are specified as a bitfield, use IPMI_CHAN_ALL to
+ * mean all channels.
+ */
+int ipmi_register_for_cmd(ipmi_user_t   user,
+			  unsigned char netfn,
+			  unsigned char cmd,
+			  unsigned int  chans);
+int ipmi_unregister_for_cmd(ipmi_user_t   user,
+			    unsigned char netfn,
+			    unsigned char cmd,
+			    unsigned int  chans);
+
+/*
+ * Go into a mode where the driver will not autonomously attempt to do
+ * things with the interface.  It will still respond to attentions and
+ * interrupts, and it will expect that commands will complete.  It
+ * will not automatcially check for flags, events, or things of that
+ * nature.
+ *
+ * This is primarily used for firmware upgrades.  The idea is that
+ * when you go into firmware upgrade mode, you do this operation
+ * and the driver will not attempt to do anything but what you tell
+ * it or what the BMC asks for.
+ *
+ * Note that if you send a command that resets the BMC, the driver
+ * will still expect a response from that command.  So the BMC should
+ * reset itself *after* the response is sent.  Resetting before the
+ * response is just silly.
+ *
+ * If in auto maintenance mode, the driver will automatically go into
+ * maintenance mode for 30 seconds if it sees a cold reset, a warm
+ * reset, or a firmware NetFN.  This means that code that uses only
+ * firmware NetFN commands to do upgrades will work automatically
+ * without change, assuming it sends a message every 30 seconds or
+ * less.
+ *
+ * See the IPMI_MAINTENANCE_MODE_xxx defines for what the mode means.
+ */
+int ipmi_get_maintenance_mode(ipmi_user_t user);
+int ipmi_set_maintenance_mode(ipmi_user_t user, int mode);
+
+/*
+ * When the user is created, it will not receive IPMI events by
+ * default.  The user must set this to TRUE to get incoming events.
+ * The first user that sets this to TRUE will receive all events that
+ * have been queued while no one was waiting for events.
+ */
+int ipmi_set_gets_events(ipmi_user_t user, int val);
+
+/*
+ * Called when a new SMI is registered.  This will also be called on
+ * every existing interface when a new watcher is registered with
+ * ipmi_smi_watcher_register().
+ */
+struct ipmi_smi_watcher {
+	struct list_head link;
+
+	/* You must set the owner to the current module, if you are in
+	   a module (generally just set it to "THIS_MODULE"). */
+	struct module *owner;
+
+	/* These two are called with read locks held for the interface
+	   the watcher list.  So you can add and remove users from the
+	   IPMI interface, send messages, etc., but you cannot add
+	   or remove SMI watchers or SMI interfaces. */
+	void (*new_smi)(int if_num, struct device *dev);
+	void (*smi_gone)(int if_num);
+};
+
+int ipmi_smi_watcher_register(struct ipmi_smi_watcher *watcher);
+int ipmi_smi_watcher_unregister(struct ipmi_smi_watcher *watcher);
+
+/* The following are various helper functions for dealing with IPMI
+   addresses. */
+
+/* Return the maximum length of an IPMI address given it's type. */
+unsigned int ipmi_addr_length(int addr_type);
+
+/* Validate that the given IPMI address is valid. */
+int ipmi_validate_addr(struct ipmi_addr *addr, int len);
+
+/*
+ * How did the IPMI driver find out about the device?
+ */
+enum ipmi_addr_src {
+	SI_INVALID = 0, SI_HOTMOD, SI_HARDCODED, SI_SPMI, SI_ACPI, SI_SMBIOS,
+	SI_PCI,	SI_DEVICETREE, SI_DEFAULT
+};
+
+union ipmi_smi_info_union {
+	/*
+	 * the acpi_info element is defined for the SI_ACPI
+	 * address type
+	 */
+	struct {
+		void *acpi_handle;
+	} acpi_info;
+};
+
+struct ipmi_smi_info {
+	enum ipmi_addr_src addr_src;
+
+	/*
+	 * Base device for the interface.  Don't forget to put this when
+	 * you are done.
+	 */
+	struct device *dev;
+
+	/*
+	 * The addr_info provides more detailed info for some IPMI
+	 * devices, depending on the addr_src.  Currently only SI_ACPI
+	 * info is provided.
+	 */
+	union ipmi_smi_info_union addr_info;
+};
+
+/* This is to get the private info of ipmi_smi_t */
+extern int ipmi_get_smi_info(int if_num, struct ipmi_smi_info *data);
+
+#endif /* __KERNEL__ */
+
+
+/*
+ * The userland interface
+ */
+
+/*
+ * The userland interface for the IPMI driver is a standard character
+ * device, with each instance of an interface registered as a minor
+ * number under the major character device.
+ *
+ * The read and write calls do not work, to get messages in and out
+ * requires ioctl calls because of the complexity of the data.  select
+ * and poll do work, so you can wait for input using the file
+ * descriptor, you just can use read to get it.
+ *
+ * In general, you send a command down to the interface and receive
+ * responses back.  You can use the msgid value to correlate commands
+ * and responses, the driver will take care of figuring out which
+ * incoming messages are for which command and find the proper msgid
+ * value to report.  You will only receive reponses for commands you
+ * send.  Asynchronous events, however, go to all open users, so you
+ * must be ready to handle these (or ignore them if you don't care).
+ *
+ * The address type depends upon the channel type.  When talking
+ * directly to the BMC (IPMC_BMC_CHANNEL), the address is ignored
+ * (IPMI_UNUSED_ADDR_TYPE).  When talking to an IPMB channel, you must
+ * supply a valid IPMB address with the addr_type set properly.
+ *
+ * When talking to normal channels, the driver takes care of the
+ * details of formatting and sending messages on that channel.  You do
+ * not, for instance, have to format a send command, you just send
+ * whatever command you want to the channel, the driver will create
+ * the send command, automatically issue receive command and get even
+ * commands, and pass those up to the proper user.
+ */
+
+
+/* The magic IOCTL value for this interface. */
+#define IPMI_IOC_MAGIC 'i'
+
+
+/* Messages sent to the interface are this format. */
+struct ipmi_req {
+	unsigned char __user *addr; /* Address to send the message to. */
+	unsigned int  addr_len;
+
+	long    msgid; /* The sequence number for the message.  This
+			  exact value will be reported back in the
+			  response to this request if it is a command.
+			  If it is a response, this will be used as
+			  the sequence value for the response.  */
+
+	struct ipmi_msg msg;
+};
+/*
+ * Send a message to the interfaces.  error values are:
+ *   - EFAULT - an address supplied was invalid.
+ *   - EINVAL - The address supplied was not valid, or the command
+ *              was not allowed.
+ *   - EMSGSIZE - The message to was too large.
+ *   - ENOMEM - Buffers could not be allocated for the command.
+ */
+#define IPMICTL_SEND_COMMAND		_IOR(IPMI_IOC_MAGIC, 13,	\
+					     struct ipmi_req)
+
+/* Messages sent to the interface with timing parameters are this
+   format. */
+struct ipmi_req_settime {
+	struct ipmi_req req;
+
+	/* See ipmi_request_settime() above for details on these
+	   values. */
+	int          retries;
+	unsigned int retry_time_ms;
+};
+/*
+ * Send a message to the interfaces with timing parameters.  error values
+ * are:
+ *   - EFAULT - an address supplied was invalid.
+ *   - EINVAL - The address supplied was not valid, or the command
+ *              was not allowed.
+ *   - EMSGSIZE - The message to was too large.
+ *   - ENOMEM - Buffers could not be allocated for the command.
+ */
+#define IPMICTL_SEND_COMMAND_SETTIME	_IOR(IPMI_IOC_MAGIC, 21,	\
+					     struct ipmi_req_settime)
+
+/* Messages received from the interface are this format. */
+struct ipmi_recv {
+	int     recv_type; /* Is this a command, response or an
+			      asyncronous event. */
+
+	unsigned char __user *addr;    /* Address the message was from is put
+				   here.  The caller must supply the
+				   memory. */
+	unsigned int  addr_len; /* The size of the address buffer.
+				   The caller supplies the full buffer
+				   length, this value is updated to
+				   the actual message length when the
+				   message is received. */
+
+	long    msgid; /* The sequence number specified in the request
+			  if this is a response.  If this is a command,
+			  this will be the sequence number from the
+			  command. */
+
+	struct ipmi_msg msg; /* The data field must point to a buffer.
+				The data_size field must be set to the
+				size of the message buffer.  The
+				caller supplies the full buffer
+				length, this value is updated to the
+				actual message length when the message
+				is received. */
+};
+
+/*
+ * Receive a message.  error values:
+ *  - EAGAIN - no messages in the queue.
+ *  - EFAULT - an address supplied was invalid.
+ *  - EINVAL - The address supplied was not valid.
+ *  - EMSGSIZE - The message to was too large to fit into the message buffer,
+ *               the message will be left in the buffer. */
+#define IPMICTL_RECEIVE_MSG		_IOWR(IPMI_IOC_MAGIC, 12,	\
+					      struct ipmi_recv)
+
+/*
+ * Like RECEIVE_MSG, but if the message won't fit in the buffer, it
+ * will truncate the contents instead of leaving the data in the
+ * buffer.
+ */
+#define IPMICTL_RECEIVE_MSG_TRUNC	_IOWR(IPMI_IOC_MAGIC, 11,	\
+					      struct ipmi_recv)
+
+/* Register to get commands from other entities on this interface. */
+struct ipmi_cmdspec {
+	unsigned char netfn;
+	unsigned char cmd;
+};
+
+/*
+ * Register to receive a specific command.  error values:
+ *   - EFAULT - an address supplied was invalid.
+ *   - EBUSY - The netfn/cmd supplied was already in use.
+ *   - ENOMEM - could not allocate memory for the entry.
+ */
+#define IPMICTL_REGISTER_FOR_CMD	_IOR(IPMI_IOC_MAGIC, 14,	\
+					     struct ipmi_cmdspec)
+/*
+ * Unregister a regsitered command.  error values:
+ *  - EFAULT - an address supplied was invalid.
+ *  - ENOENT - The netfn/cmd was not found registered for this user.
+ */
+#define IPMICTL_UNREGISTER_FOR_CMD	_IOR(IPMI_IOC_MAGIC, 15,	\
+					     struct ipmi_cmdspec)
+
+/*
+ * Register to get commands from other entities on specific channels.
+ * This way, you can only listen on specific channels, or have messages
+ * from some channels go to one place and other channels to someplace
+ * else.  The chans field is a bitmask, (1 << channel) for each channel.
+ * It may be IPMI_CHAN_ALL for all channels.
+ */
+struct ipmi_cmdspec_chans {
+	unsigned int netfn;
+	unsigned int cmd;
+	unsigned int chans;
+};
+
+/*
+ * Register to receive a specific command on specific channels.  error values:
+ *   - EFAULT - an address supplied was invalid.
+ *   - EBUSY - One of the netfn/cmd/chans supplied was already in use.
+ *   - ENOMEM - could not allocate memory for the entry.
+ */
+#define IPMICTL_REGISTER_FOR_CMD_CHANS	_IOR(IPMI_IOC_MAGIC, 28,	\
+					     struct ipmi_cmdspec_chans)
+/*
+ * Unregister some netfn/cmd/chans.  error values:
+ *  - EFAULT - an address supplied was invalid.
+ *  - ENOENT - None of the netfn/cmd/chans were found registered for this user.
+ */
+#define IPMICTL_UNREGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 29,	\
+					     struct ipmi_cmdspec_chans)
+
+/*
+ * Set whether this interface receives events.  Note that the first
+ * user registered for events will get all pending events for the
+ * interface.  error values:
+ *  - EFAULT - an address supplied was invalid.
+ */
+#define IPMICTL_SET_GETS_EVENTS_CMD	_IOR(IPMI_IOC_MAGIC, 16, int)
+
+/*
+ * Set and get the slave address and LUN that we will use for our
+ * source messages.  Note that this affects the interface, not just
+ * this user, so it will affect all users of this interface.  This is
+ * so some initialization code can come in and do the OEM-specific
+ * things it takes to determine your address (if not the BMC) and set
+ * it for everyone else.  You should probably leave the LUN alone.
+ */
+struct ipmi_channel_lun_address_set {
+	unsigned short channel;
+	unsigned char  value;
+};
+#define IPMICTL_SET_MY_CHANNEL_ADDRESS_CMD \
+	_IOR(IPMI_IOC_MAGIC, 24, struct ipmi_channel_lun_address_set)
+#define IPMICTL_GET_MY_CHANNEL_ADDRESS_CMD \
+	_IOR(IPMI_IOC_MAGIC, 25, struct ipmi_channel_lun_address_set)
+#define IPMICTL_SET_MY_CHANNEL_LUN_CMD \
+	_IOR(IPMI_IOC_MAGIC, 26, struct ipmi_channel_lun_address_set)
+#define IPMICTL_GET_MY_CHANNEL_LUN_CMD \
+	_IOR(IPMI_IOC_MAGIC, 27, struct ipmi_channel_lun_address_set)
+/* Legacy interfaces, these only set IPMB 0. */
+#define IPMICTL_SET_MY_ADDRESS_CMD	_IOR(IPMI_IOC_MAGIC, 17, unsigned int)
+#define IPMICTL_GET_MY_ADDRESS_CMD	_IOR(IPMI_IOC_MAGIC, 18, unsigned int)
+#define IPMICTL_SET_MY_LUN_CMD		_IOR(IPMI_IOC_MAGIC, 19, unsigned int)
+#define IPMICTL_GET_MY_LUN_CMD		_IOR(IPMI_IOC_MAGIC, 20, unsigned int)
+
+/*
+ * Get/set the default timing values for an interface.  You shouldn't
+ * generally mess with these.
+ */
+struct ipmi_timing_parms {
+	int          retries;
+	unsigned int retry_time_ms;
+};
+#define IPMICTL_SET_TIMING_PARMS_CMD	_IOR(IPMI_IOC_MAGIC, 22, \
+					     struct ipmi_timing_parms)
+#define IPMICTL_GET_TIMING_PARMS_CMD	_IOR(IPMI_IOC_MAGIC, 23, \
+					     struct ipmi_timing_parms)
+
+/*
+ * Set the maintenance mode.  See ipmi_set_maintenance_mode() above
+ * for a description of what this does.
+ */
+#define IPMICTL_GET_MAINTENANCE_MODE_CMD	_IOR(IPMI_IOC_MAGIC, 30, int)
+#define IPMICTL_SET_MAINTENANCE_MODE_CMD	_IOW(IPMI_IOC_MAGIC, 31, int)
+
+#endif /* __LINUX_IPMI_H */
diff --git a/include/linux/ipmi_msgdefs.h b/include/linux/ipmi_msgdefs.h
new file mode 100644
index 00000000..df97e6e3
--- /dev/null
+++ b/include/linux/ipmi_msgdefs.h
@@ -0,0 +1,121 @@
+/*
+ * ipmi_smi.h
+ *
+ * MontaVista IPMI system management interface
+ *
+ * Author: MontaVista Software, Inc.
+ *         Corey Minyard <minyard@mvista.com>
+ *         source@mvista.com
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_IPMI_MSGDEFS_H
+#define __LINUX_IPMI_MSGDEFS_H
+
+/* Various definitions for IPMI messages used by almost everything in
+   the IPMI stack. */
+
+/* NetFNs and commands used inside the IPMI stack. */
+
+#define IPMI_NETFN_SENSOR_EVENT_REQUEST		0x04
+#define IPMI_NETFN_SENSOR_EVENT_RESPONSE	0x05
+#define IPMI_GET_EVENT_RECEIVER_CMD	0x01
+
+#define IPMI_NETFN_APP_REQUEST			0x06
+#define IPMI_NETFN_APP_RESPONSE			0x07
+#define IPMI_GET_DEVICE_ID_CMD		0x01
+#define IPMI_COLD_RESET_CMD		0x02
+#define IPMI_WARM_RESET_CMD		0x03
+#define IPMI_CLEAR_MSG_FLAGS_CMD	0x30
+#define IPMI_GET_DEVICE_GUID_CMD	0x08
+#define IPMI_GET_MSG_FLAGS_CMD		0x31
+#define IPMI_SEND_MSG_CMD		0x34
+#define IPMI_GET_MSG_CMD		0x33
+#define IPMI_SET_BMC_GLOBAL_ENABLES_CMD	0x2e
+#define IPMI_GET_BMC_GLOBAL_ENABLES_CMD	0x2f
+#define IPMI_READ_EVENT_MSG_BUFFER_CMD	0x35
+#define IPMI_GET_CHANNEL_INFO_CMD	0x42
+
+/* Bit for BMC global enables. */
+#define IPMI_BMC_RCV_MSG_INTR     0x01
+#define IPMI_BMC_EVT_MSG_INTR     0x02
+#define IPMI_BMC_EVT_MSG_BUFF     0x04
+#define IPMI_BMC_SYS_LOG          0x08
+
+#define IPMI_NETFN_STORAGE_REQUEST		0x0a
+#define IPMI_NETFN_STORAGE_RESPONSE		0x0b
+#define IPMI_ADD_SEL_ENTRY_CMD		0x44
+
+#define IPMI_NETFN_FIRMWARE_REQUEST		0x08
+#define IPMI_NETFN_FIRMWARE_RESPONSE		0x09
+
+/* The default slave address */
+#define IPMI_BMC_SLAVE_ADDR	0x20
+
+/* The BT interface on high-end HP systems supports up to 255 bytes in
+ * one transfer.  Its "virtual" BMC supports some commands that are longer
+ * than 128 bytes.  Use the full 256, plus NetFn/LUN, Cmd, cCode, plus
+ * some overhead; it's not worth the effort to dynamically size this based
+ * on the results of the "Get BT Capabilities" command. */
+#define IPMI_MAX_MSG_LENGTH	272	/* multiple of 16 */
+
+#define IPMI_CC_NO_ERROR		0x00
+#define IPMI_NODE_BUSY_ERR		0xc0
+#define IPMI_INVALID_COMMAND_ERR	0xc1
+#define IPMI_TIMEOUT_ERR		0xc3
+#define IPMI_ERR_MSG_TRUNCATED		0xc6
+#define IPMI_REQ_LEN_INVALID_ERR	0xc7
+#define IPMI_REQ_LEN_EXCEEDED_ERR	0xc8
+#define IPMI_NOT_IN_MY_STATE_ERR	0xd5	/* IPMI 2.0 */
+#define IPMI_LOST_ARBITRATION_ERR	0x81
+#define IPMI_BUS_ERR			0x82
+#define IPMI_NAK_ON_WRITE_ERR		0x83
+#define IPMI_ERR_UNSPECIFIED		0xff
+
+#define IPMI_CHANNEL_PROTOCOL_IPMB	1
+#define IPMI_CHANNEL_PROTOCOL_ICMB	2
+#define IPMI_CHANNEL_PROTOCOL_SMBUS	4
+#define IPMI_CHANNEL_PROTOCOL_KCS	5
+#define IPMI_CHANNEL_PROTOCOL_SMIC	6
+#define IPMI_CHANNEL_PROTOCOL_BT10	7
+#define IPMI_CHANNEL_PROTOCOL_BT15	8
+#define IPMI_CHANNEL_PROTOCOL_TMODE	9
+
+#define IPMI_CHANNEL_MEDIUM_IPMB	1
+#define IPMI_CHANNEL_MEDIUM_ICMB10	2
+#define IPMI_CHANNEL_MEDIUM_ICMB09	3
+#define IPMI_CHANNEL_MEDIUM_8023LAN	4
+#define IPMI_CHANNEL_MEDIUM_ASYNC	5
+#define IPMI_CHANNEL_MEDIUM_OTHER_LAN	6
+#define IPMI_CHANNEL_MEDIUM_PCI_SMBUS	7
+#define IPMI_CHANNEL_MEDIUM_SMBUS1	8
+#define IPMI_CHANNEL_MEDIUM_SMBUS2	9
+#define IPMI_CHANNEL_MEDIUM_USB1	10
+#define IPMI_CHANNEL_MEDIUM_USB2	11
+#define IPMI_CHANNEL_MEDIUM_SYSINTF	12
+#define IPMI_CHANNEL_MEDIUM_OEM_MIN	0x60
+#define IPMI_CHANNEL_MEDIUM_OEM_MAX	0x7f
+
+#endif /* __LINUX_IPMI_MSGDEFS_H */
diff --git a/include/linux/ipmi_smi.h b/include/linux/ipmi_smi.h
new file mode 100644
index 00000000..fcb5d44e
--- /dev/null
+++ b/include/linux/ipmi_smi.h
@@ -0,0 +1,242 @@
+/*
+ * ipmi_smi.h
+ *
+ * MontaVista IPMI system management interface
+ *
+ * Author: MontaVista Software, Inc.
+ *         Corey Minyard <minyard@mvista.com>
+ *         source@mvista.com
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_IPMI_SMI_H
+#define __LINUX_IPMI_SMI_H
+
+#include <linux/ipmi_msgdefs.h>
+#include <linux/proc_fs.h>
+#include <linux/platform_device.h>
+#include <linux/ipmi.h>
+
+struct device;
+
+/* This files describes the interface for IPMI system management interface
+   drivers to bind into the IPMI message handler. */
+
+/* Structure for the low-level drivers. */
+typedef struct ipmi_smi *ipmi_smi_t;
+
+/*
+ * Messages to/from the lower layer.  The smi interface will take one
+ * of these to send. After the send has occurred and a response has
+ * been received, it will report this same data structure back up to
+ * the upper layer.  If an error occurs, it should fill in the
+ * response with an error code in the completion code location. When
+ * asynchronous data is received, one of these is allocated, the
+ * data_size is set to zero and the response holds the data from the
+ * get message or get event command that the interface initiated.
+ * Note that it is the interfaces responsibility to detect
+ * asynchronous data and messages and request them from the
+ * interface.
+ */
+struct ipmi_smi_msg {
+	struct list_head link;
+
+	long    msgid;
+	void    *user_data;
+
+	int           data_size;
+	unsigned char data[IPMI_MAX_MSG_LENGTH];
+
+	int           rsp_size;
+	unsigned char rsp[IPMI_MAX_MSG_LENGTH];
+
+	/* Will be called when the system is done with the message
+	   (presumably to free it). */
+	void (*done)(struct ipmi_smi_msg *msg);
+};
+
+struct ipmi_smi_handlers {
+	struct module *owner;
+
+	/* The low-level interface cannot start sending messages to
+	   the upper layer until this function is called.  This may
+	   not be NULL, the lower layer must take the interface from
+	   this call. */
+	int (*start_processing)(void       *send_info,
+				ipmi_smi_t new_intf);
+
+	/*
+	 * Get the detailed private info of the low level interface and store
+	 * it into the structure of ipmi_smi_data. For example: the
+	 * ACPI device handle will be returned for the pnp_acpi IPMI device.
+	 */
+	int (*get_smi_info)(void *send_info, struct ipmi_smi_info *data);
+
+	/* Called to enqueue an SMI message to be sent.  This
+	   operation is not allowed to fail.  If an error occurs, it
+	   should report back the error in a received message.  It may
+	   do this in the current call context, since no write locks
+	   are held when this is run.  If the priority is > 0, the
+	   message will go into a high-priority queue and be sent
+	   first.  Otherwise, it goes into a normal-priority queue. */
+	void (*sender)(void                *send_info,
+		       struct ipmi_smi_msg *msg,
+		       int                 priority);
+
+	/* Called by the upper layer to request that we try to get
+	   events from the BMC we are attached to. */
+	void (*request_events)(void *send_info);
+
+	/* Called when the interface should go into "run to
+	   completion" mode.  If this call sets the value to true, the
+	   interface should make sure that all messages are flushed
+	   out and that none are pending, and any new requests are run
+	   to completion immediately. */
+	void (*set_run_to_completion)(void *send_info, int run_to_completion);
+
+	/* Called to poll for work to do.  This is so upper layers can
+	   poll for operations during things like crash dumps. */
+	void (*poll)(void *send_info);
+
+	/* Enable/disable firmware maintenance mode.  Note that this
+	   is *not* the modes defined, this is simply an on/off
+	   setting.  The message handler does the mode handling.  Note
+	   that this is called from interrupt context, so it cannot
+	   block. */
+	void (*set_maintenance_mode)(void *send_info, int enable);
+
+	/* Tell the handler that we are using it/not using it.  The
+	   message handler get the modules that this handler belongs
+	   to; this function lets the SMI claim any modules that it
+	   uses.  These may be NULL if this is not required. */
+	int (*inc_usecount)(void *send_info);
+	void (*dec_usecount)(void *send_info);
+};
+
+struct ipmi_device_id {
+	unsigned char device_id;
+	unsigned char device_revision;
+	unsigned char firmware_revision_1;
+	unsigned char firmware_revision_2;
+	unsigned char ipmi_version;
+	unsigned char additional_device_support;
+	unsigned int  manufacturer_id;
+	unsigned int  product_id;
+	unsigned char aux_firmware_revision[4];
+	unsigned int  aux_firmware_revision_set : 1;
+};
+
+#define ipmi_version_major(v) ((v)->ipmi_version & 0xf)
+#define ipmi_version_minor(v) ((v)->ipmi_version >> 4)
+
+/* Take a pointer to a raw data buffer and a length and extract device
+   id information from it.  The first byte of data must point to the
+   netfn << 2, the data should be of the format:
+      netfn << 2, cmd, completion code, data
+   as normally comes from a device interface. */
+static inline int ipmi_demangle_device_id(const unsigned char *data,
+					  unsigned int data_len,
+					  struct ipmi_device_id *id)
+{
+	if (data_len < 9)
+		return -EINVAL;
+	if (data[0] != IPMI_NETFN_APP_RESPONSE << 2 ||
+	    data[1] != IPMI_GET_DEVICE_ID_CMD)
+		/* Strange, didn't get the response we expected. */
+		return -EINVAL;
+	if (data[2] != 0)
+		/* That's odd, it shouldn't be able to fail. */
+		return -EINVAL;
+
+	data += 3;
+	data_len -= 3;
+	id->device_id = data[0];
+	id->device_revision = data[1];
+	id->firmware_revision_1 = data[2];
+	id->firmware_revision_2 = data[3];
+	id->ipmi_version = data[4];
+	id->additional_device_support = data[5];
+	if (data_len >= 11) {
+		id->manufacturer_id = (data[6] | (data[7] << 8) |
+				       (data[8] << 16));
+		id->product_id = data[9] | (data[10] << 8);
+	} else {
+		id->manufacturer_id = 0;
+		id->product_id = 0;
+	}
+	if (data_len >= 15) {
+		memcpy(id->aux_firmware_revision, data+11, 4);
+		id->aux_firmware_revision_set = 1;
+	} else
+		id->aux_firmware_revision_set = 0;
+
+	return 0;
+}
+
+/* Add a low-level interface to the IPMI driver.  Note that if the
+   interface doesn't know its slave address, it should pass in zero.
+   The low-level interface should not deliver any messages to the
+   upper layer until the start_processing() function in the handlers
+   is called, and the lower layer must get the interface from that
+   call. */
+int ipmi_register_smi(struct ipmi_smi_handlers *handlers,
+		      void                     *send_info,
+		      struct ipmi_device_id    *device_id,
+		      struct device            *dev,
+		      const char               *sysfs_name,
+		      unsigned char            slave_addr);
+
+/*
+ * Remove a low-level interface from the IPMI driver.  This will
+ * return an error if the interface is still in use by a user.
+ */
+int ipmi_unregister_smi(ipmi_smi_t intf);
+
+/*
+ * The lower layer reports received messages through this interface.
+ * The data_size should be zero if this is an asyncronous message.  If
+ * the lower layer gets an error sending a message, it should format
+ * an error response in the message response.
+ */
+void ipmi_smi_msg_received(ipmi_smi_t          intf,
+			   struct ipmi_smi_msg *msg);
+
+/* The lower layer received a watchdog pre-timeout on interface. */
+void ipmi_smi_watchdog_pretimeout(ipmi_smi_t intf);
+
+struct ipmi_smi_msg *ipmi_alloc_smi_msg(void);
+static inline void ipmi_free_smi_msg(struct ipmi_smi_msg *msg)
+{
+	msg->done(msg);
+}
+
+/* Allow the lower layer to add things to the proc filesystem
+   directory for this interface.  Note that the entry will
+   automatically be dstroyed when the interface is destroyed. */
+int ipmi_smi_add_proc_entry(ipmi_smi_t smi, char *name,
+			    const struct file_operations *proc_ops,
+			    void *data);
+
+#endif /* __LINUX_IPMI_SMI_H */
diff --git a/include/linux/ipsec.h b/include/linux/ipsec.h
new file mode 100644
index 00000000..d17a6302
--- /dev/null
+++ b/include/linux/ipsec.h
@@ -0,0 +1,47 @@
+#ifndef _LINUX_IPSEC_H
+#define _LINUX_IPSEC_H
+
+/* The definitions, required to talk to KAME racoon IKE. */
+
+#include <linux/pfkeyv2.h>
+
+#define IPSEC_PORT_ANY		0
+#define IPSEC_ULPROTO_ANY	255
+#define IPSEC_PROTO_ANY		255
+
+enum {
+	IPSEC_MODE_ANY		= 0,	/* We do not support this for SA */
+	IPSEC_MODE_TRANSPORT	= 1,
+	IPSEC_MODE_TUNNEL	= 2,
+	IPSEC_MODE_BEET         = 3
+};
+
+enum {
+	IPSEC_DIR_ANY		= 0,
+	IPSEC_DIR_INBOUND	= 1,
+	IPSEC_DIR_OUTBOUND	= 2,
+	IPSEC_DIR_FWD		= 3,	/* It is our own */
+	IPSEC_DIR_MAX		= 4,
+	IPSEC_DIR_INVALID	= 5
+};
+
+enum {
+	IPSEC_POLICY_DISCARD	= 0,
+	IPSEC_POLICY_NONE	= 1,
+	IPSEC_POLICY_IPSEC	= 2,
+	IPSEC_POLICY_ENTRUST	= 3,
+	IPSEC_POLICY_BYPASS	= 4
+};
+
+enum {
+	IPSEC_LEVEL_DEFAULT	= 0,
+	IPSEC_LEVEL_USE		= 1,
+	IPSEC_LEVEL_REQUIRE	= 2,
+	IPSEC_LEVEL_UNIQUE	= 3
+};
+
+#define IPSEC_MANUAL_REQID_MAX	0x3fff
+
+#define IPSEC_REPLAYWSIZE  32
+
+#endif	/* _LINUX_IPSEC_H */
diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
new file mode 100644
index 00000000..8260ef77
--- /dev/null
+++ b/include/linux/ipv6.h
@@ -0,0 +1,544 @@
+#ifndef _IPV6_H
+#define _IPV6_H
+
+#include <linux/types.h>
+#include <linux/in6.h>
+#include <asm/byteorder.h>
+
+/* The latest drafts declared increase in minimal mtu up to 1280. */
+
+#define IPV6_MIN_MTU	1280
+
+/*
+ *	Advanced API
+ *	source interface/address selection, source routing, etc...
+ *	*under construction*
+ */
+
+
+struct in6_pktinfo {
+	struct in6_addr	ipi6_addr;
+	int		ipi6_ifindex;
+};
+
+struct ip6_mtuinfo {
+	struct sockaddr_in6	ip6m_addr;
+	__u32			ip6m_mtu;
+};
+
+struct in6_ifreq {
+	struct in6_addr	ifr6_addr;
+	__u32		ifr6_prefixlen;
+	int		ifr6_ifindex; 
+};
+
+#define IPV6_SRCRT_STRICT	0x01	/* Deprecated; will be removed */
+#define IPV6_SRCRT_TYPE_0	0	/* Deprecated; will be removed */
+#define IPV6_SRCRT_TYPE_2	2	/* IPv6 type 2 Routing Header	*/
+
+/*
+ *	routing header
+ */
+struct ipv6_rt_hdr {
+	__u8		nexthdr;
+	__u8		hdrlen;
+	__u8		type;
+	__u8		segments_left;
+
+	/*
+	 *	type specific data
+	 *	variable length field
+	 */
+};
+
+
+struct ipv6_opt_hdr {
+	__u8 		nexthdr;
+	__u8 		hdrlen;
+	/* 
+	 * TLV encoded option data follows.
+	 */
+} __attribute__((packed));	/* required for some archs */
+
+#define ipv6_destopt_hdr ipv6_opt_hdr
+#define ipv6_hopopt_hdr  ipv6_opt_hdr
+
+#ifdef __KERNEL__
+#define ipv6_optlen(p)  (((p)->hdrlen+1) << 3)
+#endif
+
+/*
+ *	routing header type 0 (used in cmsghdr struct)
+ */
+
+struct rt0_hdr {
+	struct ipv6_rt_hdr	rt_hdr;
+	__u32			reserved;
+	struct in6_addr		addr[0];
+
+#define rt0_type		rt_hdr.type
+};
+
+/*
+ *	routing header type 2
+ */
+
+struct rt2_hdr {
+	struct ipv6_rt_hdr	rt_hdr;
+	__u32			reserved;
+	struct in6_addr		addr;
+
+#define rt2_type		rt_hdr.type
+};
+
+/*
+ *	home address option in destination options header
+ */
+
+struct ipv6_destopt_hao {
+	__u8			type;
+	__u8			length;
+	struct in6_addr		addr;
+} __attribute__((packed));
+
+/*
+ *	IPv6 fixed header
+ *
+ *	BEWARE, it is incorrect. The first 4 bits of flow_lbl
+ *	are glued to priority now, forming "class".
+ */
+
+struct ipv6hdr {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8			priority:4,
+				version:4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u8			version:4,
+				priority:4;
+#else
+#error	"Please fix <asm/byteorder.h>"
+#endif
+	__u8			flow_lbl[3];
+
+	__be16			payload_len;
+	__u8			nexthdr;
+	__u8			hop_limit;
+
+	struct	in6_addr	saddr;
+	struct	in6_addr	daddr;
+};
+
+#ifdef __KERNEL__
+/*
+ * This structure contains configuration options per IPv6 link.
+ */
+struct ipv6_devconf {
+	__s32		forwarding;
+	__s32		hop_limit;
+	__s32		mtu6;
+	__s32		accept_ra;
+	__s32		accept_redirects;
+	__s32		autoconf;
+	__s32		dad_transmits;
+	__s32		rtr_solicits;
+	__s32		rtr_solicit_interval;
+	__s32		rtr_solicit_delay;
+	__s32		force_mld_version;
+#ifdef CONFIG_IPV6_PRIVACY
+	__s32		use_tempaddr;
+	__s32		temp_valid_lft;
+	__s32		temp_prefered_lft;
+	__s32		regen_max_retry;
+	__s32		max_desync_factor;
+#endif
+	__s32		max_addresses;
+	__s32		accept_ra_defrtr;
+	__s32		accept_ra_pinfo;
+#ifdef CONFIG_IPV6_ROUTER_PREF
+	__s32		accept_ra_rtr_pref;
+	__s32		rtr_probe_interval;
+#ifdef CONFIG_IPV6_ROUTE_INFO
+	__s32		accept_ra_rt_info_max_plen;
+#endif
+#endif
+	__s32		proxy_ndp;
+	__s32		accept_source_route;
+#ifdef CONFIG_IPV6_OPTIMISTIC_DAD
+	__s32		optimistic_dad;
+#endif
+#ifdef CONFIG_IPV6_MROUTE
+	__s32		mc_forwarding;
+#endif
+	__s32		disable_ipv6;
+	__s32		accept_dad;
+	__s32		force_tllao;
+	void		*sysctl;
+};
+
+struct ipv6_params {
+	__s32 disable_ipv6;
+	__s32 autoconf;
+};
+extern struct ipv6_params ipv6_defaults;
+#endif
+
+/* index values for the variables in ipv6_devconf */
+enum {
+	DEVCONF_FORWARDING = 0,
+	DEVCONF_HOPLIMIT,
+	DEVCONF_MTU6,
+	DEVCONF_ACCEPT_RA,
+	DEVCONF_ACCEPT_REDIRECTS,
+	DEVCONF_AUTOCONF,
+	DEVCONF_DAD_TRANSMITS,
+	DEVCONF_RTR_SOLICITS,
+	DEVCONF_RTR_SOLICIT_INTERVAL,
+	DEVCONF_RTR_SOLICIT_DELAY,
+	DEVCONF_USE_TEMPADDR,
+	DEVCONF_TEMP_VALID_LFT,
+	DEVCONF_TEMP_PREFERED_LFT,
+	DEVCONF_REGEN_MAX_RETRY,
+	DEVCONF_MAX_DESYNC_FACTOR,
+	DEVCONF_MAX_ADDRESSES,
+	DEVCONF_FORCE_MLD_VERSION,
+	DEVCONF_ACCEPT_RA_DEFRTR,
+	DEVCONF_ACCEPT_RA_PINFO,
+	DEVCONF_ACCEPT_RA_RTR_PREF,
+	DEVCONF_RTR_PROBE_INTERVAL,
+	DEVCONF_ACCEPT_RA_RT_INFO_MAX_PLEN,
+	DEVCONF_PROXY_NDP,
+	DEVCONF_OPTIMISTIC_DAD,
+	DEVCONF_ACCEPT_SOURCE_ROUTE,
+	DEVCONF_MC_FORWARDING,
+	DEVCONF_DISABLE_IPV6,
+	DEVCONF_ACCEPT_DAD,
+	DEVCONF_FORCE_TLLAO,
+	DEVCONF_MAX
+};
+
+#ifdef __KERNEL__
+#include <linux/icmpv6.h>
+#include <linux/tcp.h>
+#include <linux/udp.h>
+
+#include <net/inet_sock.h>
+
+static inline struct ipv6hdr *ipv6_hdr(const struct sk_buff *skb)
+{
+	return (struct ipv6hdr *)skb_network_header(skb);
+}
+
+static inline struct ipv6hdr *ipipv6_hdr(const struct sk_buff *skb)
+{
+	return (struct ipv6hdr *)skb_transport_header(skb);
+}
+
+static inline __u8 ipv6_tclass(const struct ipv6hdr *iph)
+{
+	return (ntohl(*(__be32 *)iph) >> 20) & 0xff;
+}
+
+/* 
+   This structure contains results of exthdrs parsing
+   as offsets from skb->nh.
+ */
+
+struct inet6_skb_parm {
+	int			iif;
+	__u16			ra;
+	__u16			hop;
+	__u16			dst0;
+	__u16			srcrt;
+	__u16			dst1;
+	__u16			lastopt;
+	__u16			nhoff;
+	__u16			flags;
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
+	__u16			dsthao;
+#endif
+
+#define IP6SKB_XFRM_TRANSFORMED	1
+#define IP6SKB_FORWARDED	2
+#define IP6SKB_REROUTED		4
+};
+
+#define IP6CB(skb)	((struct inet6_skb_parm*)((skb)->cb))
+#define IP6CBMTU(skb)	((struct ip6_mtuinfo *)((skb)->cb))
+
+static inline int inet6_iif(const struct sk_buff *skb)
+{
+	return IP6CB(skb)->iif;
+}
+
+struct inet6_request_sock {
+	struct in6_addr		loc_addr;
+	struct in6_addr		rmt_addr;
+	struct sk_buff		*pktopts;
+	int			iif;
+};
+
+struct tcp6_request_sock {
+	struct tcp_request_sock	  tcp6rsk_tcp;
+	struct inet6_request_sock tcp6rsk_inet6;
+};
+
+struct ipv6_mc_socklist;
+struct ipv6_ac_socklist;
+struct ipv6_fl_socklist;
+
+/**
+ * struct ipv6_pinfo - ipv6 private area
+ *
+ * In the struct sock hierarchy (tcp6_sock, upd6_sock, etc)
+ * this _must_ be the last member, so that inet6_sk_generic
+ * is able to calculate its offset from the base struct sock
+ * by using the struct proto->slab_obj_size member. -acme
+ */
+struct ipv6_pinfo {
+	struct in6_addr 	saddr;
+	struct in6_addr 	rcv_saddr;
+	struct in6_addr		daddr;
+	struct in6_pktinfo	sticky_pktinfo;
+	struct in6_addr		*daddr_cache;
+#ifdef CONFIG_IPV6_SUBTREES
+	struct in6_addr		*saddr_cache;
+#endif
+
+	__be32			flow_label;
+	__u32			frag_size;
+
+	/*
+	 * Packed in 16bits.
+	 * Omit one shift by by putting the signed field at MSB.
+	 */
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__s16			hop_limit:9;
+	__u16			__unused_1:7;
+#else
+	__u16			__unused_1:7;
+	__s16			hop_limit:9;
+#endif
+
+#if defined(__BIG_ENDIAN_BITFIELD)
+	/* Packed in 16bits. */
+	__s16			mcast_hops:9;
+	__u16			__unused_2:6,
+				mc_loop:1;
+#else
+	__u16			mc_loop:1,
+				__unused_2:6;
+	__s16			mcast_hops:9;
+#endif
+	int			ucast_oif;
+	int			mcast_oif;
+
+	/* pktoption flags */
+	union {
+		struct {
+			__u16	srcrt:1,
+				osrcrt:1,
+			        rxinfo:1,
+			        rxoinfo:1,
+				rxhlim:1,
+				rxohlim:1,
+				hopopts:1,
+				ohopopts:1,
+				dstopts:1,
+				odstopts:1,
+                                rxflow:1,
+				rxtclass:1,
+				rxpmtu:1,
+				rxorigdstaddr:1;
+				/* 2 bits hole */
+		} bits;
+		__u16		all;
+	} rxopt;
+
+	/* sockopt flags */
+	__u16			recverr:1,
+	                        sndflow:1,
+				pmtudisc:2,
+				ipv6only:1,
+				srcprefs:3,	/* 001: prefer temporary address
+						 * 010: prefer public address
+						 * 100: prefer care-of address
+						 */
+				dontfrag:1;
+	__u8			min_hopcount;
+	__u8			tclass;
+	__u8			rcv_tclass;
+
+	__u32			dst_cookie;
+
+	struct ipv6_mc_socklist	__rcu *ipv6_mc_list;
+	struct ipv6_ac_socklist	*ipv6_ac_list;
+	struct ipv6_fl_socklist *ipv6_fl_list;
+
+	struct ipv6_txoptions	*opt;
+	struct sk_buff		*pktoptions;
+	struct sk_buff		*rxpmtu;
+	struct {
+		struct ipv6_txoptions *opt;
+		u8 hop_limit;
+		u8 tclass;
+	} cork;
+};
+
+/* WARNING: don't change the layout of the members in {raw,udp,tcp}6_sock! */
+struct raw6_sock {
+	/* inet_sock has to be the first member of raw6_sock */
+	struct inet_sock	inet;
+	__u32			checksum;	/* perform checksum */
+	__u32			offset;		/* checksum offset  */
+	struct icmp6_filter	filter;
+	__u32			ip6mr_table;
+	/* ipv6_pinfo has to be the last member of raw6_sock, see inet6_sk_generic */
+	struct ipv6_pinfo	inet6;
+};
+
+struct udp6_sock {
+	struct udp_sock	  udp;
+	/* ipv6_pinfo has to be the last member of udp6_sock, see inet6_sk_generic */
+	struct ipv6_pinfo inet6;
+};
+
+struct tcp6_sock {
+	struct tcp_sock	  tcp;
+	/* ipv6_pinfo has to be the last member of tcp6_sock, see inet6_sk_generic */
+	struct ipv6_pinfo inet6;
+};
+
+extern int inet6_sk_rebuild_header(struct sock *sk);
+
+#if IS_ENABLED(CONFIG_IPV6)
+static inline struct ipv6_pinfo * inet6_sk(const struct sock *__sk)
+{
+	return inet_sk(__sk)->pinet6;
+}
+
+static inline struct inet6_request_sock *
+			inet6_rsk(const struct request_sock *rsk)
+{
+	return (struct inet6_request_sock *)(((u8 *)rsk) +
+					     inet_rsk(rsk)->inet6_rsk_offset);
+}
+
+static inline u32 inet6_rsk_offset(struct request_sock *rsk)
+{
+	return rsk->rsk_ops->obj_size - sizeof(struct inet6_request_sock);
+}
+
+static inline struct request_sock *inet6_reqsk_alloc(struct request_sock_ops *ops)
+{
+	struct request_sock *req = reqsk_alloc(ops);
+
+	if (req != NULL) {
+		inet_rsk(req)->inet6_rsk_offset = inet6_rsk_offset(req);
+		inet6_rsk(req)->pktopts = NULL;
+	}
+
+	return req;
+}
+
+static inline struct raw6_sock *raw6_sk(const struct sock *sk)
+{
+	return (struct raw6_sock *)sk;
+}
+
+static inline void inet_sk_copy_descendant(struct sock *sk_to,
+					   const struct sock *sk_from)
+{
+	int ancestor_size = sizeof(struct inet_sock);
+
+	if (sk_from->sk_family == PF_INET6)
+		ancestor_size += sizeof(struct ipv6_pinfo);
+
+	__inet_sk_copy_descendant(sk_to, sk_from, ancestor_size);
+}
+
+#define __ipv6_only_sock(sk)	(inet6_sk(sk)->ipv6only)
+#define ipv6_only_sock(sk)	((sk)->sk_family == PF_INET6 && __ipv6_only_sock(sk))
+
+struct inet6_timewait_sock {
+	struct in6_addr tw_v6_daddr;
+	struct in6_addr	tw_v6_rcv_saddr;
+};
+
+struct tcp6_timewait_sock {
+	struct tcp_timewait_sock   tcp6tw_tcp;
+	struct inet6_timewait_sock tcp6tw_inet6;
+};
+
+static inline u16 inet6_tw_offset(const struct proto *prot)
+{
+	return prot->twsk_prot->twsk_obj_size -
+			sizeof(struct inet6_timewait_sock);
+}
+
+static inline struct inet6_timewait_sock *inet6_twsk(const struct sock *sk)
+{
+	return (struct inet6_timewait_sock *)(((u8 *)sk) +
+					      inet_twsk(sk)->tw_ipv6_offset);
+}
+
+static inline struct in6_addr *__inet6_rcv_saddr(const struct sock *sk)
+{
+	return likely(sk->sk_state != TCP_TIME_WAIT) ?
+		&inet6_sk(sk)->rcv_saddr : &inet6_twsk(sk)->tw_v6_rcv_saddr;
+}
+
+static inline struct in6_addr *inet6_rcv_saddr(const struct sock *sk)
+{
+	return sk->sk_family == AF_INET6 ? __inet6_rcv_saddr(sk) : NULL;
+}
+
+static inline int inet_v6_ipv6only(const struct sock *sk)
+{
+	return likely(sk->sk_state != TCP_TIME_WAIT) ?
+		ipv6_only_sock(sk) : inet_twsk(sk)->tw_ipv6only;
+}
+#else
+#define __ipv6_only_sock(sk)	0
+#define ipv6_only_sock(sk)	0
+
+static inline struct ipv6_pinfo * inet6_sk(const struct sock *__sk)
+{
+	return NULL;
+}
+
+static inline struct inet6_request_sock *
+			inet6_rsk(const struct request_sock *rsk)
+{
+	return NULL;
+}
+
+static inline struct raw6_sock *raw6_sk(const struct sock *sk)
+{
+	return NULL;
+}
+
+#define __inet6_rcv_saddr(__sk)	NULL
+#define inet6_rcv_saddr(__sk)	NULL
+#define tcp_twsk_ipv6only(__sk)		0
+#define inet_v6_ipv6only(__sk)		0
+#endif /* IS_ENABLED(CONFIG_IPV6) */
+
+#define INET6_MATCH(__sk, __net, __hash, __saddr, __daddr, __ports, __dif)\
+	(((__sk)->sk_hash == (__hash)) && sock_net((__sk)) == (__net)	&& \
+	 ((*((__portpair *)&(inet_sk(__sk)->inet_dport))) == (__ports)) && \
+	 ((__sk)->sk_family		== AF_INET6)		&& \
+	 ipv6_addr_equal(&inet6_sk(__sk)->daddr, (__saddr))	&& \
+	 ipv6_addr_equal(&inet6_sk(__sk)->rcv_saddr, (__daddr))	&& \
+	 (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif))))
+
+#define INET6_TW_MATCH(__sk, __net, __hash, __saddr, __daddr, __ports, __dif) \
+	(((__sk)->sk_hash == (__hash)) && sock_net((__sk)) == (__net)	&& \
+	 (*((__portpair *)&(inet_twsk(__sk)->tw_dport)) == (__ports))	&& \
+	 ((__sk)->sk_family	       == PF_INET6)			&& \
+	 (ipv6_addr_equal(&inet6_twsk(__sk)->tw_v6_daddr, (__saddr)))	&& \
+	 (ipv6_addr_equal(&inet6_twsk(__sk)->tw_v6_rcv_saddr, (__daddr))) && \
+	 (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif))))
+
+#endif /* __KERNEL__ */
+
+#endif /* _IPV6_H */
diff --git a/include/linux/ipv6_route.h b/include/linux/ipv6_route.h
new file mode 100644
index 00000000..1e7d8af2
--- /dev/null
+++ b/include/linux/ipv6_route.h
@@ -0,0 +1,62 @@
+/*
+ *	Linux INET6 implementation 
+ *
+ *	Authors:
+ *	Pedro Roque		<roque@di.fc.ul.pt>	
+ *
+ *	This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_IPV6_ROUTE_H
+#define _LINUX_IPV6_ROUTE_H
+
+#include <linux/types.h>
+
+#define RTF_DEFAULT	0x00010000	/* default - learned via ND	*/
+#define RTF_ALLONLINK	0x00020000	/* (deprecated and will be removed)
+					   fallback, no routers on link */
+#define RTF_ADDRCONF	0x00040000	/* addrconf route - RA		*/
+#define RTF_PREFIX_RT	0x00080000	/* A prefix only route - RA	*/
+#define RTF_ANYCAST	0x00100000	/* Anycast			*/
+
+#define RTF_NONEXTHOP	0x00200000	/* route with no nexthop	*/
+#define RTF_EXPIRES	0x00400000
+
+#define RTF_ROUTEINFO	0x00800000	/* route information - RA	*/
+
+#define RTF_CACHE	0x01000000	/* cache entry			*/
+#define RTF_FLOW	0x02000000	/* flow significant route	*/
+#define RTF_POLICY	0x04000000	/* policy route			*/
+
+#define RTF_PREF(pref)	((pref) << 27)
+#define RTF_PREF_MASK	0x18000000
+
+#define RTF_LOCAL	0x80000000
+
+#ifdef __KERNEL__
+#define IPV6_EXTRACT_PREF(flag)	(((flag) & RTF_PREF_MASK) >> 27)
+#define IPV6_DECODE_PREF(pref)	((pref) ^ 2)	/* 1:low,2:med,3:high */
+#endif
+
+struct in6_rtmsg {
+	struct in6_addr		rtmsg_dst;
+	struct in6_addr		rtmsg_src;
+	struct in6_addr		rtmsg_gateway;
+	__u32			rtmsg_type;
+	__u16			rtmsg_dst_len;
+	__u16			rtmsg_src_len;
+	__u32			rtmsg_metric;
+	unsigned long		rtmsg_info;
+        __u32			rtmsg_flags;
+	int			rtmsg_ifindex;
+};
+
+#define RTMSG_NEWDEVICE		0x11
+#define RTMSG_DELDEVICE		0x12
+#define RTMSG_NEWROUTE		0x21
+#define RTMSG_DELROUTE		0x22
+
+#endif
diff --git a/include/linux/ipx.h b/include/linux/ipx.h
new file mode 100644
index 00000000..3d48014c
--- /dev/null
+++ b/include/linux/ipx.h
@@ -0,0 +1,75 @@
+#ifndef _IPX_H_
+#define _IPX_H_
+#include <linux/types.h>
+#include <linux/sockios.h>
+#include <linux/socket.h>
+#define IPX_NODE_LEN	6
+#define IPX_MTU		576
+
+struct sockaddr_ipx {
+	__kernel_sa_family_t sipx_family;
+	__be16		sipx_port;
+	__be32		sipx_network;
+	unsigned char 	sipx_node[IPX_NODE_LEN];
+	__u8		sipx_type;
+	unsigned char	sipx_zero;	/* 16 byte fill */
+};
+
+/*
+ * So we can fit the extra info for SIOCSIFADDR into the address nicely
+ */
+#define sipx_special	sipx_port
+#define sipx_action	sipx_zero
+#define IPX_DLTITF	0
+#define IPX_CRTITF	1
+
+struct ipx_route_definition {
+	__be32        ipx_network;
+	__be32        ipx_router_network;
+	unsigned char ipx_router_node[IPX_NODE_LEN];
+};
+
+struct ipx_interface_definition {
+	__be32        ipx_network;
+	unsigned char ipx_device[16];
+	unsigned char ipx_dlink_type;
+#define IPX_FRAME_NONE		0
+#define IPX_FRAME_SNAP		1
+#define IPX_FRAME_8022		2
+#define IPX_FRAME_ETHERII	3
+#define IPX_FRAME_8023		4
+#define IPX_FRAME_TR_8022       5 /* obsolete */
+	unsigned char ipx_special;
+#define IPX_SPECIAL_NONE	0
+#define IPX_PRIMARY		1
+#define IPX_INTERNAL		2
+	unsigned char ipx_node[IPX_NODE_LEN];
+};
+	
+struct ipx_config_data {
+	unsigned char	ipxcfg_auto_select_primary;
+	unsigned char	ipxcfg_auto_create_interfaces;
+};
+
+/*
+ * OLD Route Definition for backward compatibility.
+ */
+
+struct ipx_route_def {
+	__be32		ipx_network;
+	__be32		ipx_router_network;
+#define IPX_ROUTE_NO_ROUTER	0
+	unsigned char	ipx_router_node[IPX_NODE_LEN];
+	unsigned char	ipx_device[16];
+	unsigned short	ipx_flags;
+#define IPX_RT_SNAP		8
+#define IPX_RT_8022		4
+#define IPX_RT_BLUEBOOK		2
+#define IPX_RT_ROUTED		1
+};
+
+#define SIOCAIPXITFCRT		(SIOCPROTOPRIVATE)
+#define SIOCAIPXPRISLT		(SIOCPROTOPRIVATE + 1)
+#define SIOCIPXCFGDATA		(SIOCPROTOPRIVATE + 2)
+#define SIOCIPXNCPCONN		(SIOCPROTOPRIVATE + 3)
+#endif /* _IPX_H_ */
diff --git a/include/linux/irda.h b/include/linux/irda.h
new file mode 100644
index 00000000..a014c325
--- /dev/null
+++ b/include/linux/irda.h
@@ -0,0 +1,251 @@
+/*********************************************************************
+ *                
+ * Filename:      irda.h
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Mon Mar  8 14:06:12 1999
+ * Modified at:   Sat Dec 25 16:06:42 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *      
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *  
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef KERNEL_IRDA_H
+#define KERNEL_IRDA_H
+
+#include <linux/types.h>
+#include <linux/socket.h>
+
+/* Note that this file is shared with user space. */
+
+/* Hint bit positions for first hint byte */
+#define HINT_PNP         0x01
+#define HINT_PDA         0x02
+#define HINT_COMPUTER    0x04
+#define HINT_PRINTER     0x08
+#define HINT_MODEM       0x10
+#define HINT_FAX         0x20
+#define HINT_LAN         0x40
+#define HINT_EXTENSION   0x80
+
+/* Hint bit positions for second hint byte (first extension byte) */
+#define HINT_TELEPHONY   0x01
+#define HINT_FILE_SERVER 0x02
+#define HINT_COMM        0x04
+#define HINT_MESSAGE     0x08
+#define HINT_HTTP        0x10
+#define HINT_OBEX        0x20
+
+/* IrLMP character code values */
+#define CS_ASCII         0x00
+#define	CS_ISO_8859_1    0x01
+#define	CS_ISO_8859_2    0x02
+#define	CS_ISO_8859_3    0x03
+#define	CS_ISO_8859_4    0x04
+#define	CS_ISO_8859_5    0x05
+#define	CS_ISO_8859_6    0x06
+#define	CS_ISO_8859_7    0x07
+#define	CS_ISO_8859_8    0x08
+#define	CS_ISO_8859_9    0x09
+#define CS_UNICODE       0xff
+
+/* These are the currently known dongles */
+typedef enum {
+	IRDA_TEKRAM_DONGLE       = 0,
+	IRDA_ESI_DONGLE          = 1,
+	IRDA_ACTISYS_DONGLE      = 2,
+	IRDA_ACTISYS_PLUS_DONGLE = 3,
+	IRDA_GIRBIL_DONGLE       = 4,
+	IRDA_LITELINK_DONGLE     = 5,
+	IRDA_AIRPORT_DONGLE      = 6,
+	IRDA_OLD_BELKIN_DONGLE   = 7,
+	IRDA_EP7211_IR           = 8,
+	IRDA_MCP2120_DONGLE      = 9,
+	IRDA_ACT200L_DONGLE      = 10,
+	IRDA_MA600_DONGLE        = 11,
+	IRDA_TOIM3232_DONGLE     = 12,
+	IRDA_EP7211_DONGLE       = 13,
+} IRDA_DONGLE;
+
+/* Protocol types to be used for SOCK_DGRAM */
+enum {
+	IRDAPROTO_UNITDATA = 0,
+	IRDAPROTO_ULTRA    = 1,
+	IRDAPROTO_MAX
+};
+
+#define SOL_IRLMP      266 /* Same as SOL_IRDA for now */
+#define SOL_IRTTP      266 /* Same as SOL_IRDA for now */
+
+#define IRLMP_ENUMDEVICES        1	/* Return discovery log */
+#define IRLMP_IAS_SET            2	/* Set an attribute in local IAS */
+#define IRLMP_IAS_QUERY          3	/* Query remote IAS for attribute */
+#define IRLMP_HINTS_SET          4	/* Set hint bits advertised */
+#define IRLMP_QOS_SET            5
+#define IRLMP_QOS_GET            6
+#define IRLMP_MAX_SDU_SIZE       7
+#define IRLMP_IAS_GET            8	/* Get an attribute from local IAS */
+#define IRLMP_IAS_DEL		 9	/* Remove attribute from local IAS */
+#define IRLMP_HINT_MASK_SET	10	/* Set discovery filter */
+#define IRLMP_WAITDEVICE	11	/* Wait for a new discovery */
+
+#define IRTTP_MAX_SDU_SIZE IRLMP_MAX_SDU_SIZE /* Compatibility */
+
+#define IAS_MAX_STRING         256	/* See IrLMP 1.1, 4.3.3.2 */
+#define IAS_MAX_OCTET_STRING  1024	/* See IrLMP 1.1, 4.3.3.2 */
+#define IAS_MAX_CLASSNAME       60	/* See IrLMP 1.1, 4.3.1 */
+#define IAS_MAX_ATTRIBNAME      60	/* See IrLMP 1.1, 4.3.3.1 */
+#define IAS_MAX_ATTRIBNUMBER   256	/* See IrLMP 1.1, 4.3.3.1 */
+/* For user space backward compatibility - may be fixed in kernel 2.5.X
+ * Note : need 60+1 ('\0'), make it 64 for alignement - Jean II */
+#define IAS_EXPORT_CLASSNAME       64
+#define IAS_EXPORT_ATTRIBNAME     256
+
+/* Attribute type needed for struct irda_ias_set */
+#define IAS_MISSING 0
+#define IAS_INTEGER 1
+#define IAS_OCT_SEQ 2
+#define IAS_STRING  3
+
+#define LSAP_ANY              0xff
+
+struct sockaddr_irda {
+	__kernel_sa_family_t sir_family; /* AF_IRDA */
+	__u8        sir_lsap_sel; /* LSAP selector */
+	__u32       sir_addr;     /* Device address */
+	char        sir_name[25]; /* Usually <service>:IrDA:TinyTP */
+};
+
+struct irda_device_info {
+	__u32       saddr;    /* Address of local interface */
+	__u32       daddr;    /* Address of remote device */
+	char        info[22]; /* Description */
+	__u8        charset;  /* Charset used for description */
+	__u8        hints[2]; /* Hint bits */
+};
+
+struct irda_device_list {
+       __u32 len;
+       struct irda_device_info dev[1];
+};
+
+struct irda_ias_set {
+	char irda_class_name[IAS_EXPORT_CLASSNAME];
+	char irda_attrib_name[IAS_EXPORT_ATTRIBNAME];
+	unsigned int irda_attrib_type;
+	union {
+		unsigned int irda_attrib_int;
+		struct {
+			unsigned short len;
+			__u8 octet_seq[IAS_MAX_OCTET_STRING];
+		} irda_attrib_octet_seq;
+		struct {
+			__u8 len;
+			__u8 charset;
+			__u8 string[IAS_MAX_STRING];
+		} irda_attrib_string;
+	} attribute;
+	__u32       daddr;    /* Address of device (for some queries only) */
+};
+
+/* Some private IOCTL's (max 16) */
+#define SIOCSDONGLE    (SIOCDEVPRIVATE + 0)
+#define SIOCGDONGLE    (SIOCDEVPRIVATE + 1)
+#define SIOCSBANDWIDTH (SIOCDEVPRIVATE + 2)
+#define SIOCSMEDIABUSY (SIOCDEVPRIVATE + 3)
+#define SIOCGMEDIABUSY (SIOCDEVPRIVATE + 4)
+#define SIOCGRECEIVING (SIOCDEVPRIVATE + 5)
+#define SIOCSMODE      (SIOCDEVPRIVATE + 6)
+#define SIOCGMODE      (SIOCDEVPRIVATE + 7)
+#define SIOCSDTRRTS    (SIOCDEVPRIVATE + 8)
+#define SIOCGQOS       (SIOCDEVPRIVATE + 9)
+
+/* No reason to include <linux/if.h> just because of this one ;-) */
+#define IRNAMSIZ 16 
+
+/* IrDA quality of service information (must not exceed 16 bytes) */
+struct if_irda_qos {
+	unsigned long  baudrate;
+	unsigned short data_size;
+	unsigned short window_size;
+	unsigned short min_turn_time;
+	unsigned short max_turn_time;
+	unsigned char  add_bofs;
+	unsigned char  link_disc;
+};
+
+/* For setting RTS and DTR lines of a dongle */
+struct if_irda_line {
+	__u8 dtr;
+	__u8 rts;
+};
+
+/* IrDA interface configuration (data part must not exceed 16 bytes) */
+struct if_irda_req {
+	union {
+		char ifrn_name[IRNAMSIZ];  /* if name, e.g. "irda0" */
+	} ifr_ifrn;
+	
+	/* Data part */
+	union {
+		struct if_irda_line ifru_line;
+		struct if_irda_qos  ifru_qos;
+		unsigned short      ifru_flags;
+		unsigned int        ifru_receiving;
+		unsigned int        ifru_mode;
+		unsigned int        ifru_dongle;
+	} ifr_ifru;
+};
+
+#define ifr_baudrate  ifr_ifru.ifru_qos.baudrate
+#define ifr_receiving ifr_ifru.ifru_receiving 
+#define ifr_dongle    ifr_ifru.ifru_dongle
+#define ifr_mode      ifr_ifru.ifru_mode
+#define ifr_dtr       ifr_ifru.ifru_line.dtr
+#define ifr_rts       ifr_ifru.ifru_line.rts
+
+
+/* IrDA netlink definitions */
+#define IRDA_NL_NAME "irda"
+#define IRDA_NL_VERSION 1
+
+enum irda_nl_commands {
+	IRDA_NL_CMD_UNSPEC,
+	IRDA_NL_CMD_SET_MODE,
+	IRDA_NL_CMD_GET_MODE,
+
+	__IRDA_NL_CMD_AFTER_LAST
+};
+#define IRDA_NL_CMD_MAX (__IRDA_NL_CMD_AFTER_LAST - 1)
+
+enum nl80211_attrs {
+	IRDA_NL_ATTR_UNSPEC,
+	IRDA_NL_ATTR_IFNAME,
+	IRDA_NL_ATTR_MODE,
+
+	__IRDA_NL_ATTR_AFTER_LAST
+};
+#define IRDA_NL_ATTR_MAX (__IRDA_NL_ATTR_AFTER_LAST - 1)
+
+/* IrDA modes */
+#define IRDA_MODE_PRIMARY   0x1
+#define IRDA_MODE_SECONDARY 0x2
+#define IRDA_MODE_MONITOR   0x4
+
+#endif /* KERNEL_IRDA_H */
+
+
+
+
diff --git a/include/linux/irq.h b/include/linux/irq.h
new file mode 100644
index 00000000..b27cfcfd
--- /dev/null
+++ b/include/linux/irq.h
@@ -0,0 +1,752 @@
+#ifndef _LINUX_IRQ_H
+#define _LINUX_IRQ_H
+
+/*
+ * Please do not include this file in generic code.  There is currently
+ * no requirement for any architecture to implement anything held
+ * within this file.
+ *
+ * Thanks. --rmk
+ */
+
+#include <linux/smp.h>
+
+#ifndef CONFIG_S390
+
+#include <linux/linkage.h>
+#include <linux/cache.h>
+#include <linux/spinlock.h>
+#include <linux/cpumask.h>
+#include <linux/gfp.h>
+#include <linux/irqreturn.h>
+#include <linux/irqnr.h>
+#include <linux/errno.h>
+#include <linux/topology.h>
+#include <linux/wait.h>
+
+#include <asm/irq.h>
+#include <asm/ptrace.h>
+#include <asm/irq_regs.h>
+
+struct seq_file;
+struct module;
+struct irq_desc;
+struct irq_data;
+typedef	void (*irq_flow_handler_t)(unsigned int irq,
+					    struct irq_desc *desc);
+typedef	void (*irq_preflow_handler_t)(struct irq_data *data);
+
+/*
+ * IRQ line status.
+ *
+ * Bits 0-7 are the same as the IRQF_* bits in linux/interrupt.h
+ *
+ * IRQ_TYPE_NONE		- default, unspecified type
+ * IRQ_TYPE_EDGE_RISING		- rising edge triggered
+ * IRQ_TYPE_EDGE_FALLING	- falling edge triggered
+ * IRQ_TYPE_EDGE_BOTH		- rising and falling edge triggered
+ * IRQ_TYPE_LEVEL_HIGH		- high level triggered
+ * IRQ_TYPE_LEVEL_LOW		- low level triggered
+ * IRQ_TYPE_LEVEL_MASK		- Mask to filter out the level bits
+ * IRQ_TYPE_SENSE_MASK		- Mask for all the above bits
+ * IRQ_TYPE_DEFAULT		- For use by some PICs to ask irq_set_type
+ *				  to setup the HW to a sane default (used
+ *                                by irqdomain map() callbacks to synchronize
+ *                                the HW state and SW flags for a newly
+ *                                allocated descriptor).
+ *
+ * IRQ_TYPE_PROBE		- Special flag for probing in progress
+ *
+ * Bits which can be modified via irq_set/clear/modify_status_flags()
+ * IRQ_LEVEL			- Interrupt is level type. Will be also
+ *				  updated in the code when the above trigger
+ *				  bits are modified via irq_set_irq_type()
+ * IRQ_PER_CPU			- Mark an interrupt PER_CPU. Will protect
+ *				  it from affinity setting
+ * IRQ_NOPROBE			- Interrupt cannot be probed by autoprobing
+ * IRQ_NOREQUEST		- Interrupt cannot be requested via
+ *				  request_irq()
+ * IRQ_NOTHREAD			- Interrupt cannot be threaded
+ * IRQ_NOAUTOEN			- Interrupt is not automatically enabled in
+ *				  request/setup_irq()
+ * IRQ_NO_BALANCING		- Interrupt cannot be balanced (affinity set)
+ * IRQ_MOVE_PCNTXT		- Interrupt can be migrated from process context
+ * IRQ_NESTED_TRHEAD		- Interrupt nests into another thread
+ * IRQ_PER_CPU_DEVID		- Dev_id is a per-cpu variable
+ */
+enum {
+	IRQ_TYPE_NONE		= 0x00000000,
+	IRQ_TYPE_EDGE_RISING	= 0x00000001,
+	IRQ_TYPE_EDGE_FALLING	= 0x00000002,
+	IRQ_TYPE_EDGE_BOTH	= (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING),
+	IRQ_TYPE_LEVEL_HIGH	= 0x00000004,
+	IRQ_TYPE_LEVEL_LOW	= 0x00000008,
+	IRQ_TYPE_LEVEL_MASK	= (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH),
+	IRQ_TYPE_SENSE_MASK	= 0x0000000f,
+	IRQ_TYPE_DEFAULT	= IRQ_TYPE_SENSE_MASK,
+
+	IRQ_TYPE_PROBE		= 0x00000010,
+
+	IRQ_LEVEL		= (1 <<  8),
+	IRQ_PER_CPU		= (1 <<  9),
+	IRQ_NOPROBE		= (1 << 10),
+	IRQ_NOREQUEST		= (1 << 11),
+	IRQ_NOAUTOEN		= (1 << 12),
+	IRQ_NO_BALANCING	= (1 << 13),
+	IRQ_MOVE_PCNTXT		= (1 << 14),
+	IRQ_NESTED_THREAD	= (1 << 15),
+	IRQ_NOTHREAD		= (1 << 16),
+	IRQ_PER_CPU_DEVID	= (1 << 17),
+};
+
+#define IRQF_MODIFY_MASK	\
+	(IRQ_TYPE_SENSE_MASK | IRQ_NOPROBE | IRQ_NOREQUEST | \
+	 IRQ_NOAUTOEN | IRQ_MOVE_PCNTXT | IRQ_LEVEL | IRQ_NO_BALANCING | \
+	 IRQ_PER_CPU | IRQ_NESTED_THREAD | IRQ_NOTHREAD | IRQ_PER_CPU_DEVID)
+
+#define IRQ_NO_BALANCING_MASK	(IRQ_PER_CPU | IRQ_NO_BALANCING)
+
+/*
+ * Return value for chip->irq_set_affinity()
+ *
+ * IRQ_SET_MASK_OK	- OK, core updates irq_data.affinity
+ * IRQ_SET_MASK_NOCPY	- OK, chip did update irq_data.affinity
+ */
+enum {
+	IRQ_SET_MASK_OK = 0,
+	IRQ_SET_MASK_OK_NOCOPY,
+};
+
+struct msi_desc;
+struct irq_domain;
+
+/**
+ * struct irq_data - per irq and irq chip data passed down to chip functions
+ * @irq:		interrupt number
+ * @hwirq:		hardware interrupt number, local to the interrupt domain
+ * @node:		node index useful for balancing
+ * @state_use_accessors: status information for irq chip functions.
+ *			Use accessor functions to deal with it
+ * @chip:		low level interrupt hardware access
+ * @domain:		Interrupt translation domain; responsible for mapping
+ *			between hwirq number and linux irq number.
+ * @handler_data:	per-IRQ data for the irq_chip methods
+ * @chip_data:		platform-specific per-chip private data for the chip
+ *			methods, to allow shared chip implementations
+ * @msi_desc:		MSI descriptor
+ * @affinity:		IRQ affinity on SMP
+ *
+ * The fields here need to overlay the ones in irq_desc until we
+ * cleaned up the direct references and switched everything over to
+ * irq_data.
+ */
+struct irq_data {
+	unsigned int		irq;
+	unsigned long		hwirq;
+	unsigned int		node;
+	unsigned int		state_use_accessors;
+	struct irq_chip		*chip;
+	struct irq_domain	*domain;
+	void			*handler_data;
+	void			*chip_data;
+	struct msi_desc		*msi_desc;
+#ifdef CONFIG_SMP
+	cpumask_var_t		affinity;
+#endif
+};
+
+/*
+ * Bit masks for irq_data.state
+ *
+ * IRQD_TRIGGER_MASK		- Mask for the trigger type bits
+ * IRQD_SETAFFINITY_PENDING	- Affinity setting is pending
+ * IRQD_NO_BALANCING		- Balancing disabled for this IRQ
+ * IRQD_PER_CPU			- Interrupt is per cpu
+ * IRQD_AFFINITY_SET		- Interrupt affinity was set
+ * IRQD_LEVEL			- Interrupt is level triggered
+ * IRQD_WAKEUP_STATE		- Interrupt is configured for wakeup
+ *				  from suspend
+ * IRDQ_MOVE_PCNTXT		- Interrupt can be moved in process
+ *				  context
+ * IRQD_IRQ_DISABLED		- Disabled state of the interrupt
+ * IRQD_IRQ_MASKED		- Masked state of the interrupt
+ * IRQD_IRQ_INPROGRESS		- In progress state of the interrupt
+ */
+enum {
+	IRQD_TRIGGER_MASK		= 0xf,
+	IRQD_SETAFFINITY_PENDING	= (1 <<  8),
+	IRQD_NO_BALANCING		= (1 << 10),
+	IRQD_PER_CPU			= (1 << 11),
+	IRQD_AFFINITY_SET		= (1 << 12),
+	IRQD_LEVEL			= (1 << 13),
+	IRQD_WAKEUP_STATE		= (1 << 14),
+	IRQD_MOVE_PCNTXT		= (1 << 15),
+	IRQD_IRQ_DISABLED		= (1 << 16),
+	IRQD_IRQ_MASKED			= (1 << 17),
+	IRQD_IRQ_INPROGRESS		= (1 << 18),
+};
+
+static inline bool irqd_is_setaffinity_pending(struct irq_data *d)
+{
+	return d->state_use_accessors & IRQD_SETAFFINITY_PENDING;
+}
+
+static inline bool irqd_is_per_cpu(struct irq_data *d)
+{
+	return d->state_use_accessors & IRQD_PER_CPU;
+}
+
+static inline bool irqd_can_balance(struct irq_data *d)
+{
+	return !(d->state_use_accessors & (IRQD_PER_CPU | IRQD_NO_BALANCING));
+}
+
+static inline bool irqd_affinity_was_set(struct irq_data *d)
+{
+	return d->state_use_accessors & IRQD_AFFINITY_SET;
+}
+
+static inline void irqd_mark_affinity_was_set(struct irq_data *d)
+{
+	d->state_use_accessors |= IRQD_AFFINITY_SET;
+}
+
+static inline u32 irqd_get_trigger_type(struct irq_data *d)
+{
+	return d->state_use_accessors & IRQD_TRIGGER_MASK;
+}
+
+/*
+ * Must only be called inside irq_chip.irq_set_type() functions.
+ */
+static inline void irqd_set_trigger_type(struct irq_data *d, u32 type)
+{
+	d->state_use_accessors &= ~IRQD_TRIGGER_MASK;
+	d->state_use_accessors |= type & IRQD_TRIGGER_MASK;
+}
+
+static inline bool irqd_is_level_type(struct irq_data *d)
+{
+	return d->state_use_accessors & IRQD_LEVEL;
+}
+
+static inline bool irqd_is_wakeup_set(struct irq_data *d)
+{
+	return d->state_use_accessors & IRQD_WAKEUP_STATE;
+}
+
+static inline bool irqd_can_move_in_process_context(struct irq_data *d)
+{
+	return d->state_use_accessors & IRQD_MOVE_PCNTXT;
+}
+
+static inline bool irqd_irq_disabled(struct irq_data *d)
+{
+	return d->state_use_accessors & IRQD_IRQ_DISABLED;
+}
+
+static inline bool irqd_irq_masked(struct irq_data *d)
+{
+	return d->state_use_accessors & IRQD_IRQ_MASKED;
+}
+
+static inline bool irqd_irq_inprogress(struct irq_data *d)
+{
+	return d->state_use_accessors & IRQD_IRQ_INPROGRESS;
+}
+
+/*
+ * Functions for chained handlers which can be enabled/disabled by the
+ * standard disable_irq/enable_irq calls. Must be called with
+ * irq_desc->lock held.
+ */
+static inline void irqd_set_chained_irq_inprogress(struct irq_data *d)
+{
+	d->state_use_accessors |= IRQD_IRQ_INPROGRESS;
+}
+
+static inline void irqd_clr_chained_irq_inprogress(struct irq_data *d)
+{
+	d->state_use_accessors &= ~IRQD_IRQ_INPROGRESS;
+}
+
+static inline irq_hw_number_t irqd_to_hwirq(struct irq_data *d)
+{
+	return d->hwirq;
+}
+
+/**
+ * struct irq_chip - hardware interrupt chip descriptor
+ *
+ * @name:		name for /proc/interrupts
+ * @irq_startup:	start up the interrupt (defaults to ->enable if NULL)
+ * @irq_shutdown:	shut down the interrupt (defaults to ->disable if NULL)
+ * @irq_enable:		enable the interrupt (defaults to chip->unmask if NULL)
+ * @irq_disable:	disable the interrupt
+ * @irq_ack:		start of a new interrupt
+ * @irq_mask:		mask an interrupt source
+ * @irq_mask_ack:	ack and mask an interrupt source
+ * @irq_unmask:		unmask an interrupt source
+ * @irq_eoi:		end of interrupt
+ * @irq_set_affinity:	set the CPU affinity on SMP machines
+ * @irq_retrigger:	resend an IRQ to the CPU
+ * @irq_set_type:	set the flow type (IRQ_TYPE_LEVEL/etc.) of an IRQ
+ * @irq_set_wake:	enable/disable power-management wake-on of an IRQ
+ * @irq_bus_lock:	function to lock access to slow bus (i2c) chips
+ * @irq_bus_sync_unlock:function to sync and unlock slow bus (i2c) chips
+ * @irq_cpu_online:	configure an interrupt source for a secondary CPU
+ * @irq_cpu_offline:	un-configure an interrupt source for a secondary CPU
+ * @irq_suspend:	function called from core code on suspend once per chip
+ * @irq_resume:		function called from core code on resume once per chip
+ * @irq_pm_shutdown:	function called from core code on shutdown once per chip
+ * @irq_print_chip:	optional to print special chip info in show_interrupts
+ * @flags:		chip specific flags
+ *
+ * @release:		release function solely used by UML
+ */
+struct irq_chip {
+	const char	*name;
+	unsigned int	(*irq_startup)(struct irq_data *data);
+	void		(*irq_shutdown)(struct irq_data *data);
+	void		(*irq_enable)(struct irq_data *data);
+	void		(*irq_disable)(struct irq_data *data);
+
+	void		(*irq_ack)(struct irq_data *data);
+	void		(*irq_mask)(struct irq_data *data);
+	void		(*irq_mask_ack)(struct irq_data *data);
+	void		(*irq_unmask)(struct irq_data *data);
+	void		(*irq_eoi)(struct irq_data *data);
+
+	int		(*irq_set_affinity)(struct irq_data *data, const struct cpumask *dest, bool force);
+	int		(*irq_retrigger)(struct irq_data *data);
+	int		(*irq_set_type)(struct irq_data *data, unsigned int flow_type);
+	int		(*irq_set_wake)(struct irq_data *data, unsigned int on);
+
+	void		(*irq_bus_lock)(struct irq_data *data);
+	void		(*irq_bus_sync_unlock)(struct irq_data *data);
+
+	void		(*irq_cpu_online)(struct irq_data *data);
+	void		(*irq_cpu_offline)(struct irq_data *data);
+
+	void		(*irq_suspend)(struct irq_data *data);
+	void		(*irq_resume)(struct irq_data *data);
+	void		(*irq_pm_shutdown)(struct irq_data *data);
+
+	void		(*irq_print_chip)(struct irq_data *data, struct seq_file *p);
+
+	unsigned long	flags;
+
+	/* Currently used only by UML, might disappear one day.*/
+#ifdef CONFIG_IRQ_RELEASE_METHOD
+	void		(*release)(unsigned int irq, void *dev_id);
+#endif
+};
+
+/*
+ * irq_chip specific flags
+ *
+ * IRQCHIP_SET_TYPE_MASKED:	Mask before calling chip.irq_set_type()
+ * IRQCHIP_EOI_IF_HANDLED:	Only issue irq_eoi() when irq was handled
+ * IRQCHIP_MASK_ON_SUSPEND:	Mask non wake irqs in the suspend path
+ * IRQCHIP_ONOFFLINE_ENABLED:	Only call irq_on/off_line callbacks
+ *				when irq enabled
+ * IRQCHIP_SKIP_SET_WAKE:	Skip chip.irq_set_wake(), for this irq chip
+ */
+enum {
+	IRQCHIP_SET_TYPE_MASKED		= (1 <<  0),
+	IRQCHIP_EOI_IF_HANDLED		= (1 <<  1),
+	IRQCHIP_MASK_ON_SUSPEND		= (1 <<  2),
+	IRQCHIP_ONOFFLINE_ENABLED	= (1 <<  3),
+	IRQCHIP_SKIP_SET_WAKE		= (1 <<  4),
+};
+
+/* This include will go away once we isolated irq_desc usage to core code */
+#include <linux/irqdesc.h>
+
+/*
+ * Pick up the arch-dependent methods:
+ */
+#include <asm/hw_irq.h>
+
+#ifndef NR_IRQS_LEGACY
+# define NR_IRQS_LEGACY 0
+#endif
+
+#ifndef ARCH_IRQ_INIT_FLAGS
+# define ARCH_IRQ_INIT_FLAGS	0
+#endif
+
+#define IRQ_DEFAULT_INIT_FLAGS	ARCH_IRQ_INIT_FLAGS
+
+struct irqaction;
+extern int setup_irq(unsigned int irq, struct irqaction *new);
+extern void remove_irq(unsigned int irq, struct irqaction *act);
+extern int setup_percpu_irq(unsigned int irq, struct irqaction *new);
+extern void remove_percpu_irq(unsigned int irq, struct irqaction *act);
+
+extern void irq_cpu_online(void);
+extern void irq_cpu_offline(void);
+extern int __irq_set_affinity_locked(struct irq_data *data,  const struct cpumask *cpumask);
+
+#ifdef CONFIG_GENERIC_HARDIRQS
+
+#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_PENDING_IRQ)
+void irq_move_irq(struct irq_data *data);
+void irq_move_masked_irq(struct irq_data *data);
+#else
+static inline void irq_move_irq(struct irq_data *data) { }
+static inline void irq_move_masked_irq(struct irq_data *data) { }
+#endif
+
+extern int no_irq_affinity;
+
+/*
+ * Built-in IRQ handlers for various IRQ types,
+ * callable via desc->handle_irq()
+ */
+extern void handle_level_irq(unsigned int irq, struct irq_desc *desc);
+extern void handle_fasteoi_irq(unsigned int irq, struct irq_desc *desc);
+extern void handle_edge_irq(unsigned int irq, struct irq_desc *desc);
+extern void handle_edge_eoi_irq(unsigned int irq, struct irq_desc *desc);
+extern void handle_simple_irq(unsigned int irq, struct irq_desc *desc);
+extern void handle_percpu_irq(unsigned int irq, struct irq_desc *desc);
+extern void handle_percpu_devid_irq(unsigned int irq, struct irq_desc *desc);
+extern void handle_bad_irq(unsigned int irq, struct irq_desc *desc);
+extern void handle_nested_irq(unsigned int irq);
+
+/* Handling of unhandled and spurious interrupts: */
+extern void note_interrupt(unsigned int irq, struct irq_desc *desc,
+			   irqreturn_t action_ret);
+
+
+/* Enable/disable irq debugging output: */
+extern int noirqdebug_setup(char *str);
+
+/* Checks whether the interrupt can be requested by request_irq(): */
+extern int can_request_irq(unsigned int irq, unsigned long irqflags);
+
+/* Dummy irq-chip implementations: */
+extern struct irq_chip no_irq_chip;
+extern struct irq_chip dummy_irq_chip;
+
+extern void
+irq_set_chip_and_handler_name(unsigned int irq, struct irq_chip *chip,
+			      irq_flow_handler_t handle, const char *name);
+
+static inline void irq_set_chip_and_handler(unsigned int irq, struct irq_chip *chip,
+					    irq_flow_handler_t handle)
+{
+	irq_set_chip_and_handler_name(irq, chip, handle, NULL);
+}
+
+extern int irq_set_percpu_devid(unsigned int irq);
+
+extern void
+__irq_set_handler(unsigned int irq, irq_flow_handler_t handle, int is_chained,
+		  const char *name);
+
+static inline void
+irq_set_handler(unsigned int irq, irq_flow_handler_t handle)
+{
+	__irq_set_handler(irq, handle, 0, NULL);
+}
+
+/*
+ * Set a highlevel chained flow handler for a given IRQ.
+ * (a chained handler is automatically enabled and set to
+ *  IRQ_NOREQUEST, IRQ_NOPROBE, and IRQ_NOTHREAD)
+ */
+static inline void
+irq_set_chained_handler(unsigned int irq, irq_flow_handler_t handle)
+{
+	__irq_set_handler(irq, handle, 1, NULL);
+}
+
+void irq_modify_status(unsigned int irq, unsigned long clr, unsigned long set);
+
+static inline void irq_set_status_flags(unsigned int irq, unsigned long set)
+{
+	irq_modify_status(irq, 0, set);
+}
+
+static inline void irq_clear_status_flags(unsigned int irq, unsigned long clr)
+{
+	irq_modify_status(irq, clr, 0);
+}
+
+static inline void irq_set_noprobe(unsigned int irq)
+{
+	irq_modify_status(irq, 0, IRQ_NOPROBE);
+}
+
+static inline void irq_set_probe(unsigned int irq)
+{
+	irq_modify_status(irq, IRQ_NOPROBE, 0);
+}
+
+static inline void irq_set_nothread(unsigned int irq)
+{
+	irq_modify_status(irq, 0, IRQ_NOTHREAD);
+}
+
+static inline void irq_set_thread(unsigned int irq)
+{
+	irq_modify_status(irq, IRQ_NOTHREAD, 0);
+}
+
+static inline void irq_set_nested_thread(unsigned int irq, bool nest)
+{
+	if (nest)
+		irq_set_status_flags(irq, IRQ_NESTED_THREAD);
+	else
+		irq_clear_status_flags(irq, IRQ_NESTED_THREAD);
+}
+
+static inline void irq_set_percpu_devid_flags(unsigned int irq)
+{
+	irq_set_status_flags(irq,
+			     IRQ_NOAUTOEN | IRQ_PER_CPU | IRQ_NOTHREAD |
+			     IRQ_NOPROBE | IRQ_PER_CPU_DEVID);
+}
+
+/* Handle dynamic irq creation and destruction */
+extern unsigned int create_irq_nr(unsigned int irq_want, int node);
+extern int create_irq(void);
+extern void destroy_irq(unsigned int irq);
+
+/*
+ * Dynamic irq helper functions. Obsolete. Use irq_alloc_desc* and
+ * irq_free_desc instead.
+ */
+extern void dynamic_irq_cleanup(unsigned int irq);
+static inline void dynamic_irq_init(unsigned int irq)
+{
+	dynamic_irq_cleanup(irq);
+}
+
+/* Set/get chip/data for an IRQ: */
+extern int irq_set_chip(unsigned int irq, struct irq_chip *chip);
+extern int irq_set_handler_data(unsigned int irq, void *data);
+extern int irq_set_chip_data(unsigned int irq, void *data);
+extern int irq_set_irq_type(unsigned int irq, unsigned int type);
+extern int irq_set_msi_desc(unsigned int irq, struct msi_desc *entry);
+extern struct irq_data *irq_get_irq_data(unsigned int irq);
+
+static inline struct irq_chip *irq_get_chip(unsigned int irq)
+{
+	struct irq_data *d = irq_get_irq_data(irq);
+	return d ? d->chip : NULL;
+}
+
+static inline struct irq_chip *irq_data_get_irq_chip(struct irq_data *d)
+{
+	return d->chip;
+}
+
+static inline void *irq_get_chip_data(unsigned int irq)
+{
+	struct irq_data *d = irq_get_irq_data(irq);
+	return d ? d->chip_data : NULL;
+}
+
+static inline void *irq_data_get_irq_chip_data(struct irq_data *d)
+{
+	return d->chip_data;
+}
+
+static inline void *irq_get_handler_data(unsigned int irq)
+{
+	struct irq_data *d = irq_get_irq_data(irq);
+	return d ? d->handler_data : NULL;
+}
+
+static inline void *irq_data_get_irq_handler_data(struct irq_data *d)
+{
+	return d->handler_data;
+}
+
+static inline struct msi_desc *irq_get_msi_desc(unsigned int irq)
+{
+	struct irq_data *d = irq_get_irq_data(irq);
+	return d ? d->msi_desc : NULL;
+}
+
+static inline struct msi_desc *irq_data_get_msi(struct irq_data *d)
+{
+	return d->msi_desc;
+}
+
+int __irq_alloc_descs(int irq, unsigned int from, unsigned int cnt, int node,
+		struct module *owner);
+
+/* use macros to avoid needing export.h for THIS_MODULE */
+#define irq_alloc_descs(irq, from, cnt, node)	\
+	__irq_alloc_descs(irq, from, cnt, node, THIS_MODULE)
+
+#define irq_alloc_desc(node)			\
+	irq_alloc_descs(-1, 0, 1, node)
+
+#define irq_alloc_desc_at(at, node)		\
+	irq_alloc_descs(at, at, 1, node)
+
+#define irq_alloc_desc_from(from, node)		\
+	irq_alloc_descs(-1, from, 1, node)
+
+void irq_free_descs(unsigned int irq, unsigned int cnt);
+int irq_reserve_irqs(unsigned int from, unsigned int cnt);
+
+static inline void irq_free_desc(unsigned int irq)
+{
+	irq_free_descs(irq, 1);
+}
+
+static inline int irq_reserve_irq(unsigned int irq)
+{
+	return irq_reserve_irqs(irq, 1);
+}
+
+#ifndef irq_reg_writel
+# define irq_reg_writel(val, addr)	writel(val, addr)
+#endif
+#ifndef irq_reg_readl
+# define irq_reg_readl(addr)		readl(addr)
+#endif
+
+/**
+ * struct irq_chip_regs - register offsets for struct irq_gci
+ * @enable:	Enable register offset to reg_base
+ * @disable:	Disable register offset to reg_base
+ * @mask:	Mask register offset to reg_base
+ * @ack:	Ack register offset to reg_base
+ * @eoi:	Eoi register offset to reg_base
+ * @type:	Type configuration register offset to reg_base
+ * @polarity:	Polarity configuration register offset to reg_base
+ */
+struct irq_chip_regs {
+	unsigned long		enable;
+	unsigned long		disable;
+	unsigned long		mask;
+	unsigned long		ack;
+	unsigned long		eoi;
+	unsigned long		type;
+	unsigned long		polarity;
+};
+
+/**
+ * struct irq_chip_type - Generic interrupt chip instance for a flow type
+ * @chip:		The real interrupt chip which provides the callbacks
+ * @regs:		Register offsets for this chip
+ * @handler:		Flow handler associated with this chip
+ * @type:		Chip can handle these flow types
+ *
+ * A irq_generic_chip can have several instances of irq_chip_type when
+ * it requires different functions and register offsets for different
+ * flow types.
+ */
+struct irq_chip_type {
+	struct irq_chip		chip;
+	struct irq_chip_regs	regs;
+	irq_flow_handler_t	handler;
+	u32			type;
+};
+
+/**
+ * struct irq_chip_generic - Generic irq chip data structure
+ * @lock:		Lock to protect register and cache data access
+ * @reg_base:		Register base address (virtual)
+ * @irq_base:		Interrupt base nr for this chip
+ * @irq_cnt:		Number of interrupts handled by this chip
+ * @mask_cache:		Cached mask register
+ * @type_cache:		Cached type register
+ * @polarity_cache:	Cached polarity register
+ * @wake_enabled:	Interrupt can wakeup from suspend
+ * @wake_active:	Interrupt is marked as an wakeup from suspend source
+ * @num_ct:		Number of available irq_chip_type instances (usually 1)
+ * @private:		Private data for non generic chip callbacks
+ * @list:		List head for keeping track of instances
+ * @chip_types:		Array of interrupt irq_chip_types
+ *
+ * Note, that irq_chip_generic can have multiple irq_chip_type
+ * implementations which can be associated to a particular irq line of
+ * an irq_chip_generic instance. That allows to share and protect
+ * state in an irq_chip_generic instance when we need to implement
+ * different flow mechanisms (level/edge) for it.
+ */
+struct irq_chip_generic {
+	raw_spinlock_t		lock;
+	void __iomem		*reg_base;
+	unsigned int		irq_base;
+	unsigned int		irq_cnt;
+	u32			mask_cache;
+	u32			type_cache;
+	u32			polarity_cache;
+	u32			wake_enabled;
+	u32			wake_active;
+	unsigned int		num_ct;
+	void			*private;
+	struct list_head	list;
+	struct irq_chip_type	chip_types[0];
+};
+
+/**
+ * enum irq_gc_flags - Initialization flags for generic irq chips
+ * @IRQ_GC_INIT_MASK_CACHE:	Initialize the mask_cache by reading mask reg
+ * @IRQ_GC_INIT_NESTED_LOCK:	Set the lock class of the irqs to nested for
+ *				irq chips which need to call irq_set_wake() on
+ *				the parent irq. Usually GPIO implementations
+ */
+enum irq_gc_flags {
+	IRQ_GC_INIT_MASK_CACHE		= 1 << 0,
+	IRQ_GC_INIT_NESTED_LOCK		= 1 << 1,
+};
+
+/* Generic chip callback functions */
+void irq_gc_noop(struct irq_data *d);
+void irq_gc_mask_disable_reg(struct irq_data *d);
+void irq_gc_mask_set_bit(struct irq_data *d);
+void irq_gc_mask_clr_bit(struct irq_data *d);
+void irq_gc_unmask_enable_reg(struct irq_data *d);
+void irq_gc_ack_set_bit(struct irq_data *d);
+void irq_gc_ack_clr_bit(struct irq_data *d);
+void irq_gc_mask_disable_reg_and_ack(struct irq_data *d);
+void irq_gc_eoi(struct irq_data *d);
+int irq_gc_set_wake(struct irq_data *d, unsigned int on);
+
+/* Setup functions for irq_chip_generic */
+struct irq_chip_generic *
+irq_alloc_generic_chip(const char *name, int nr_ct, unsigned int irq_base,
+		       void __iomem *reg_base, irq_flow_handler_t handler);
+void irq_setup_generic_chip(struct irq_chip_generic *gc, u32 msk,
+			    enum irq_gc_flags flags, unsigned int clr,
+			    unsigned int set);
+int irq_setup_alt_chip(struct irq_data *d, unsigned int type);
+void irq_remove_generic_chip(struct irq_chip_generic *gc, u32 msk,
+			     unsigned int clr, unsigned int set);
+
+static inline struct irq_chip_type *irq_data_get_chip_type(struct irq_data *d)
+{
+	return container_of(d->chip, struct irq_chip_type, chip);
+}
+
+#define IRQ_MSK(n) (u32)((n) < 32 ? ((1 << (n)) - 1) : UINT_MAX)
+
+#ifdef CONFIG_SMP
+static inline void irq_gc_lock(struct irq_chip_generic *gc)
+{
+	raw_spin_lock(&gc->lock);
+}
+
+static inline void irq_gc_unlock(struct irq_chip_generic *gc)
+{
+	raw_spin_unlock(&gc->lock);
+}
+#else
+static inline void irq_gc_lock(struct irq_chip_generic *gc) { }
+static inline void irq_gc_unlock(struct irq_chip_generic *gc) { }
+#endif
+
+#endif /* CONFIG_GENERIC_HARDIRQS */
+
+#endif /* !CONFIG_S390 */
+
+#endif /* _LINUX_IRQ_H */
diff --git a/include/linux/irq_cpustat.h b/include/linux/irq_cpustat.h
new file mode 100644
index 00000000..77e4bac2
--- /dev/null
+++ b/include/linux/irq_cpustat.h
@@ -0,0 +1,31 @@
+#ifndef __irq_cpustat_h
+#define __irq_cpustat_h
+
+/*
+ * Contains default mappings for irq_cpustat_t, used by almost every
+ * architecture.  Some arch (like s390) have per cpu hardware pages and
+ * they define their own mappings for irq_stat.
+ *
+ * Keith Owens <kaos@ocs.com.au> July 2000.
+ */
+
+
+/*
+ * Simple wrappers reducing source bloat.  Define all irq_stat fields
+ * here, even ones that are arch dependent.  That way we get common
+ * definitions instead of differing sets for each arch.
+ */
+
+#ifndef __ARCH_IRQ_STAT
+extern irq_cpustat_t irq_stat[];		/* defined in asm/hardirq.h */
+#define __IRQ_STAT(cpu, member)	(irq_stat[cpu].member)
+#endif
+
+  /* arch independent irq_stat fields */
+#define local_softirq_pending() \
+	__IRQ_STAT(smp_processor_id(), __softirq_pending)
+
+  /* arch dependent irq_stat fields */
+#define nmi_count(cpu)		__IRQ_STAT((cpu), __nmi_count)	/* i386 */
+
+#endif	/* __irq_cpustat_h */
diff --git a/include/linux/irq_work.h b/include/linux/irq_work.h
new file mode 100644
index 00000000..6a9e8f53
--- /dev/null
+++ b/include/linux/irq_work.h
@@ -0,0 +1,23 @@
+#ifndef _LINUX_IRQ_WORK_H
+#define _LINUX_IRQ_WORK_H
+
+#include <linux/llist.h>
+
+struct irq_work {
+	unsigned long flags;
+	struct llist_node llnode;
+	void (*func)(struct irq_work *);
+};
+
+static inline
+void init_irq_work(struct irq_work *work, void (*func)(struct irq_work *))
+{
+	work->flags = 0;
+	work->func = func;
+}
+
+bool irq_work_queue(struct irq_work *work);
+void irq_work_run(void);
+void irq_work_sync(struct irq_work *work);
+
+#endif /* _LINUX_IRQ_WORK_H */
diff --git a/include/linux/irqdesc.h b/include/linux/irqdesc.h
new file mode 100644
index 00000000..f1e25270
--- /dev/null
+++ b/include/linux/irqdesc.h
@@ -0,0 +1,178 @@
+#ifndef _LINUX_IRQDESC_H
+#define _LINUX_IRQDESC_H
+
+/*
+ * Core internal functions to deal with irq descriptors
+ *
+ * This include will move to kernel/irq once we cleaned up the tree.
+ * For now it's included from <linux/irq.h>
+ */
+
+struct irq_affinity_notify;
+struct proc_dir_entry;
+struct timer_rand_state;
+struct module;
+/**
+ * struct irq_desc - interrupt descriptor
+ * @irq_data:		per irq and chip data passed down to chip functions
+ * @timer_rand_state:	pointer to timer rand state struct
+ * @kstat_irqs:		irq stats per cpu
+ * @handle_irq:		highlevel irq-events handler
+ * @preflow_handler:	handler called before the flow handler (currently used by sparc)
+ * @action:		the irq action chain
+ * @status:		status information
+ * @core_internal_state__do_not_mess_with_it: core internal status information
+ * @depth:		disable-depth, for nested irq_disable() calls
+ * @wake_depth:		enable depth, for multiple irq_set_irq_wake() callers
+ * @irq_count:		stats field to detect stalled irqs
+ * @last_unhandled:	aging timer for unhandled count
+ * @irqs_unhandled:	stats field for spurious unhandled interrupts
+ * @lock:		locking for SMP
+ * @affinity_hint:	hint to user space for preferred irq affinity
+ * @affinity_notify:	context for notification of affinity changes
+ * @pending_mask:	pending rebalanced interrupts
+ * @threads_oneshot:	bitfield to handle shared oneshot threads
+ * @threads_active:	number of irqaction threads currently running
+ * @wait_for_threads:	wait queue for sync_irq to wait for threaded handlers
+ * @dir:		/proc/irq/ procfs entry
+ * @name:		flow handler name for /proc/interrupts output
+ */
+struct irq_desc {
+	struct irq_data		irq_data;
+	struct timer_rand_state *timer_rand_state;
+	unsigned int __percpu	*kstat_irqs;
+	irq_flow_handler_t	handle_irq;
+#ifdef CONFIG_IRQ_PREFLOW_FASTEOI
+	irq_preflow_handler_t	preflow_handler;
+#endif
+	struct irqaction	*action;	/* IRQ action list */
+	unsigned int		status_use_accessors;
+	unsigned int		core_internal_state__do_not_mess_with_it;
+	unsigned int		depth;		/* nested irq disables */
+	unsigned int		wake_depth;	/* nested wake enables */
+	unsigned int		irq_count;	/* For detecting broken IRQs */
+	unsigned long		last_unhandled;	/* Aging timer for unhandled count */
+	unsigned int		irqs_unhandled;
+	raw_spinlock_t		lock;
+	struct cpumask		*percpu_enabled;
+#ifdef CONFIG_SMP
+	const struct cpumask	*affinity_hint;
+	struct irq_affinity_notify *affinity_notify;
+#ifdef CONFIG_GENERIC_PENDING_IRQ
+	cpumask_var_t		pending_mask;
+#endif
+#endif
+	unsigned long		threads_oneshot;
+	atomic_t		threads_active;
+	wait_queue_head_t       wait_for_threads;
+#ifdef CONFIG_PROC_FS
+	struct proc_dir_entry	*dir;
+#endif
+	struct module		*owner;
+	const char		*name;
+} ____cacheline_internodealigned_in_smp;
+
+#ifndef CONFIG_SPARSE_IRQ
+extern struct irq_desc irq_desc[NR_IRQS];
+#endif
+
+#ifdef CONFIG_GENERIC_HARDIRQS
+
+static inline struct irq_data *irq_desc_get_irq_data(struct irq_desc *desc)
+{
+	return &desc->irq_data;
+}
+
+static inline struct irq_chip *irq_desc_get_chip(struct irq_desc *desc)
+{
+	return desc->irq_data.chip;
+}
+
+static inline void *irq_desc_get_chip_data(struct irq_desc *desc)
+{
+	return desc->irq_data.chip_data;
+}
+
+static inline void *irq_desc_get_handler_data(struct irq_desc *desc)
+{
+	return desc->irq_data.handler_data;
+}
+
+static inline struct msi_desc *irq_desc_get_msi_desc(struct irq_desc *desc)
+{
+	return desc->irq_data.msi_desc;
+}
+
+/*
+ * Architectures call this to let the generic IRQ layer
+ * handle an interrupt. If the descriptor is attached to an
+ * irqchip-style controller then we call the ->handle_irq() handler,
+ * and it calls __do_IRQ() if it's attached to an irqtype-style controller.
+ */
+static inline void generic_handle_irq_desc(unsigned int irq, struct irq_desc *desc)
+{
+	desc->handle_irq(irq, desc);
+}
+
+int generic_handle_irq(unsigned int irq);
+
+/* Test to see if a driver has successfully requested an irq */
+static inline int irq_has_action(unsigned int irq)
+{
+	struct irq_desc *desc = irq_to_desc(irq);
+	return desc->action != NULL;
+}
+
+/* caller has locked the irq_desc and both params are valid */
+static inline void __irq_set_handler_locked(unsigned int irq,
+					    irq_flow_handler_t handler)
+{
+	struct irq_desc *desc;
+
+	desc = irq_to_desc(irq);
+	desc->handle_irq = handler;
+}
+
+/* caller has locked the irq_desc and both params are valid */
+static inline void
+__irq_set_chip_handler_name_locked(unsigned int irq, struct irq_chip *chip,
+				   irq_flow_handler_t handler, const char *name)
+{
+	struct irq_desc *desc;
+
+	desc = irq_to_desc(irq);
+	irq_desc_get_irq_data(desc)->chip = chip;
+	desc->handle_irq = handler;
+	desc->name = name;
+}
+
+static inline int irq_balancing_disabled(unsigned int irq)
+{
+	struct irq_desc *desc;
+
+	desc = irq_to_desc(irq);
+	return desc->status_use_accessors & IRQ_NO_BALANCING_MASK;
+}
+
+static inline void
+irq_set_lockdep_class(unsigned int irq, struct lock_class_key *class)
+{
+	struct irq_desc *desc = irq_to_desc(irq);
+
+	if (desc)
+		lockdep_set_class(&desc->lock, class);
+}
+
+#ifdef CONFIG_IRQ_PREFLOW_FASTEOI
+static inline void
+__irq_set_preflow_handler(unsigned int irq, irq_preflow_handler_t handler)
+{
+	struct irq_desc *desc;
+
+	desc = irq_to_desc(irq);
+	desc->preflow_handler = handler;
+}
+#endif
+#endif
+
+#endif
diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h
new file mode 100644
index 00000000..c65740d7
--- /dev/null
+++ b/include/linux/irqdomain.h
@@ -0,0 +1,186 @@
+/*
+ * irq_domain - IRQ translation domains
+ *
+ * Translation infrastructure between hw and linux irq numbers.  This is
+ * helpful for interrupt controllers to implement mapping between hardware
+ * irq numbers and the Linux irq number space.
+ *
+ * irq_domains also have a hook for translating device tree interrupt
+ * representation into a hardware irq number that can be mapped back to a
+ * Linux irq number without any extra platform support code.
+ *
+ * Interrupt controller "domain" data structure. This could be defined as a
+ * irq domain controller. That is, it handles the mapping between hardware
+ * and virtual interrupt numbers for a given interrupt domain. The domain
+ * structure is generally created by the PIC code for a given PIC instance
+ * (though a domain can cover more than one PIC if they have a flat number
+ * model). It's the domain callbacks that are responsible for setting the
+ * irq_chip on a given irq_desc after it's been mapped.
+ *
+ * The host code and data structures are agnostic to whether or not
+ * we use an open firmware device-tree. We do have references to struct
+ * device_node in two places: in irq_find_host() to find the host matching
+ * a given interrupt controller node, and of course as an argument to its
+ * counterpart domain->ops->match() callback. However, those are treated as
+ * generic pointers by the core and the fact that it's actually a device-node
+ * pointer is purely a convention between callers and implementation. This
+ * code could thus be used on other architectures by replacing those two
+ * by some sort of arch-specific void * "token" used to identify interrupt
+ * controllers.
+ */
+
+#ifndef _LINUX_IRQDOMAIN_H
+#define _LINUX_IRQDOMAIN_H
+
+#include <linux/types.h>
+#include <linux/radix-tree.h>
+
+struct device_node;
+struct irq_domain;
+struct of_device_id;
+
+/* Number of irqs reserved for a legacy isa controller */
+#define NUM_ISA_INTERRUPTS	16
+
+/**
+ * struct irq_domain_ops - Methods for irq_domain objects
+ * @match: Match an interrupt controller device node to a host, returns
+ *         1 on a match
+ * @map: Create or update a mapping between a virtual irq number and a hw
+ *       irq number. This is called only once for a given mapping.
+ * @unmap: Dispose of such a mapping
+ * @xlate: Given a device tree node and interrupt specifier, decode
+ *         the hardware irq number and linux irq type value.
+ *
+ * Functions below are provided by the driver and called whenever a new mapping
+ * is created or an old mapping is disposed. The driver can then proceed to
+ * whatever internal data structures management is required. It also needs
+ * to setup the irq_desc when returning from map().
+ */
+struct irq_domain_ops {
+	int (*match)(struct irq_domain *d, struct device_node *node);
+	int (*map)(struct irq_domain *d, unsigned int virq, irq_hw_number_t hw);
+	void (*unmap)(struct irq_domain *d, unsigned int virq);
+	int (*xlate)(struct irq_domain *d, struct device_node *node,
+		     const u32 *intspec, unsigned int intsize,
+		     unsigned long *out_hwirq, unsigned int *out_type);
+};
+
+/**
+ * struct irq_domain - Hardware interrupt number translation object
+ * @link: Element in global irq_domain list.
+ * @revmap_type: Method used for reverse mapping hwirq numbers to linux irq. This
+ *               will be one of the IRQ_DOMAIN_MAP_* values.
+ * @revmap_data: Revmap method specific data.
+ * @ops: pointer to irq_domain methods
+ * @host_data: private data pointer for use by owner.  Not touched by irq_domain
+ *             core code.
+ * @irq_base: Start of irq_desc range assigned to the irq_domain.  The creator
+ *            of the irq_domain is responsible for allocating the array of
+ *            irq_desc structures.
+ * @nr_irq: Number of irqs managed by the irq domain
+ * @hwirq_base: Starting number for hwirqs managed by the irq domain
+ * @of_node: (optional) Pointer to device tree nodes associated with the
+ *           irq_domain.  Used when decoding device tree interrupt specifiers.
+ */
+struct irq_domain {
+	struct list_head link;
+
+	/* type of reverse mapping_technique */
+	unsigned int revmap_type;
+	union {
+		struct {
+			unsigned int size;
+			unsigned int first_irq;
+			irq_hw_number_t first_hwirq;
+		} legacy;
+		struct {
+			unsigned int size;
+			unsigned int *revmap;
+		} linear;
+		struct {
+			unsigned int max_irq;
+		} nomap;
+		struct radix_tree_root tree;
+	} revmap_data;
+	const struct irq_domain_ops *ops;
+	void *host_data;
+	irq_hw_number_t inval_irq;
+
+	/* Optional device node pointer */
+	struct device_node *of_node;
+};
+
+#ifdef CONFIG_IRQ_DOMAIN
+struct irq_domain *irq_domain_add_legacy(struct device_node *of_node,
+					 unsigned int size,
+					 unsigned int first_irq,
+					 irq_hw_number_t first_hwirq,
+					 const struct irq_domain_ops *ops,
+					 void *host_data);
+struct irq_domain *irq_domain_add_linear(struct device_node *of_node,
+					 unsigned int size,
+					 const struct irq_domain_ops *ops,
+					 void *host_data);
+struct irq_domain *irq_domain_add_nomap(struct device_node *of_node,
+					 unsigned int max_irq,
+					 const struct irq_domain_ops *ops,
+					 void *host_data);
+struct irq_domain *irq_domain_add_tree(struct device_node *of_node,
+					 const struct irq_domain_ops *ops,
+					 void *host_data);
+
+extern struct irq_domain *irq_find_host(struct device_node *node);
+extern void irq_set_default_host(struct irq_domain *host);
+
+static inline struct irq_domain *irq_domain_add_legacy_isa(
+				struct device_node *of_node,
+				const struct irq_domain_ops *ops,
+				void *host_data)
+{
+	return irq_domain_add_legacy(of_node, NUM_ISA_INTERRUPTS, 0, 0, ops,
+				     host_data);
+}
+extern struct irq_domain *irq_find_host(struct device_node *node);
+extern void irq_set_default_host(struct irq_domain *host);
+
+
+extern unsigned int irq_create_mapping(struct irq_domain *host,
+				       irq_hw_number_t hwirq);
+extern void irq_dispose_mapping(unsigned int virq);
+extern unsigned int irq_find_mapping(struct irq_domain *host,
+				     irq_hw_number_t hwirq);
+extern unsigned int irq_create_direct_mapping(struct irq_domain *host);
+extern void irq_radix_revmap_insert(struct irq_domain *host, unsigned int virq,
+				    irq_hw_number_t hwirq);
+extern unsigned int irq_radix_revmap_lookup(struct irq_domain *host,
+					    irq_hw_number_t hwirq);
+extern unsigned int irq_linear_revmap(struct irq_domain *host,
+				      irq_hw_number_t hwirq);
+
+extern const struct irq_domain_ops irq_domain_simple_ops;
+
+/* stock xlate functions */
+int irq_domain_xlate_onecell(struct irq_domain *d, struct device_node *ctrlr,
+			const u32 *intspec, unsigned int intsize,
+			irq_hw_number_t *out_hwirq, unsigned int *out_type);
+int irq_domain_xlate_twocell(struct irq_domain *d, struct device_node *ctrlr,
+			const u32 *intspec, unsigned int intsize,
+			irq_hw_number_t *out_hwirq, unsigned int *out_type);
+int irq_domain_xlate_onetwocell(struct irq_domain *d, struct device_node *ctrlr,
+			const u32 *intspec, unsigned int intsize,
+			irq_hw_number_t *out_hwirq, unsigned int *out_type);
+
+#if defined(CONFIG_OF_IRQ)
+extern void irq_domain_generate_simple(const struct of_device_id *match,
+					u64 phys_base, unsigned int irq_start);
+#else /* CONFIG_OF_IRQ */
+static inline void irq_domain_generate_simple(const struct of_device_id *match,
+					u64 phys_base, unsigned int irq_start) { }
+#endif /* !CONFIG_OF_IRQ */
+
+#else /* CONFIG_IRQ_DOMAIN */
+static inline void irq_dispose_mapping(unsigned int virq) { }
+#endif /* !CONFIG_IRQ_DOMAIN */
+
+#endif /* _LINUX_IRQDOMAIN_H */
diff --git a/include/linux/irqflags.h b/include/linux/irqflags.h
new file mode 100644
index 00000000..d176d658
--- /dev/null
+++ b/include/linux/irqflags.h
@@ -0,0 +1,150 @@
+/*
+ * include/linux/irqflags.h
+ *
+ * IRQ flags tracing: follow the state of the hardirq and softirq flags and
+ * provide callbacks for transitions between ON and OFF states.
+ *
+ * This file gets included from lowlevel asm headers too, to provide
+ * wrapped versions of the local_irq_*() APIs, based on the
+ * raw_local_irq_*() macros from the lowlevel headers.
+ */
+#ifndef _LINUX_TRACE_IRQFLAGS_H
+#define _LINUX_TRACE_IRQFLAGS_H
+
+#include <linux/typecheck.h>
+#include <asm/irqflags.h>
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+  extern void trace_softirqs_on(unsigned long ip);
+  extern void trace_softirqs_off(unsigned long ip);
+  extern void trace_hardirqs_on(void);
+  extern void trace_hardirqs_off(void);
+# define trace_hardirq_context(p)	((p)->hardirq_context)
+# define trace_softirq_context(p)	((p)->softirq_context)
+# define trace_hardirqs_enabled(p)	((p)->hardirqs_enabled)
+# define trace_softirqs_enabled(p)	((p)->softirqs_enabled)
+# define trace_hardirq_enter()	do { current->hardirq_context++; } while (0)
+# define trace_hardirq_exit()	do { current->hardirq_context--; } while (0)
+# define lockdep_softirq_enter()	do { current->softirq_context++; } while (0)
+# define lockdep_softirq_exit()	do { current->softirq_context--; } while (0)
+# define INIT_TRACE_IRQFLAGS	.softirqs_enabled = 1,
+#else
+# define trace_hardirqs_on()		do { } while (0)
+# define trace_hardirqs_off()		do { } while (0)
+# define trace_softirqs_on(ip)		do { } while (0)
+# define trace_softirqs_off(ip)		do { } while (0)
+# define trace_hardirq_context(p)	0
+# define trace_softirq_context(p)	0
+# define trace_hardirqs_enabled(p)	0
+# define trace_softirqs_enabled(p)	0
+# define trace_hardirq_enter()		do { } while (0)
+# define trace_hardirq_exit()		do { } while (0)
+# define lockdep_softirq_enter()	do { } while (0)
+# define lockdep_softirq_exit()		do { } while (0)
+# define INIT_TRACE_IRQFLAGS
+#endif
+
+#if defined(CONFIG_IRQSOFF_TRACER) || \
+	defined(CONFIG_PREEMPT_TRACER)
+ extern void stop_critical_timings(void);
+ extern void start_critical_timings(void);
+#else
+# define stop_critical_timings() do { } while (0)
+# define start_critical_timings() do { } while (0)
+#endif
+
+/*
+ * Wrap the arch provided IRQ routines to provide appropriate checks.
+ */
+#define raw_local_irq_disable()		arch_local_irq_disable()
+#define raw_local_irq_enable()		arch_local_irq_enable()
+#define raw_local_irq_save(flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		flags = arch_local_irq_save();		\
+	} while (0)
+#define raw_local_irq_restore(flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		arch_local_irq_restore(flags);		\
+	} while (0)
+#define raw_local_save_flags(flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		flags = arch_local_save_flags();	\
+	} while (0)
+#define raw_irqs_disabled_flags(flags)			\
+	({						\
+		typecheck(unsigned long, flags);	\
+		arch_irqs_disabled_flags(flags);	\
+	})
+#define raw_irqs_disabled()		(arch_irqs_disabled())
+#define raw_safe_halt()			arch_safe_halt()
+
+/*
+ * The local_irq_*() APIs are equal to the raw_local_irq*()
+ * if !TRACE_IRQFLAGS.
+ */
+#ifdef CONFIG_TRACE_IRQFLAGS_SUPPORT
+#define local_irq_enable() \
+	do { trace_hardirqs_on(); raw_local_irq_enable(); } while (0)
+#define local_irq_disable() \
+	do { raw_local_irq_disable(); trace_hardirqs_off(); } while (0)
+#define local_irq_save(flags)				\
+	do {						\
+		raw_local_irq_save(flags);		\
+		trace_hardirqs_off();			\
+	} while (0)
+
+
+#define local_irq_restore(flags)			\
+	do {						\
+		if (raw_irqs_disabled_flags(flags)) {	\
+			raw_local_irq_restore(flags);	\
+			trace_hardirqs_off();		\
+		} else {				\
+			trace_hardirqs_on();		\
+			raw_local_irq_restore(flags);	\
+		}					\
+	} while (0)
+#define local_save_flags(flags)				\
+	do {						\
+		raw_local_save_flags(flags);		\
+	} while (0)
+
+#define irqs_disabled_flags(flags)			\
+	({						\
+		raw_irqs_disabled_flags(flags);		\
+	})
+
+#define irqs_disabled()					\
+	({						\
+		unsigned long _flags;			\
+		raw_local_save_flags(_flags);		\
+		raw_irqs_disabled_flags(_flags);	\
+	})
+
+#define safe_halt()				\
+	do {					\
+		trace_hardirqs_on();		\
+		raw_safe_halt();		\
+	} while (0)
+
+
+#else /* !CONFIG_TRACE_IRQFLAGS_SUPPORT */
+
+#define local_irq_enable()	do { raw_local_irq_enable(); } while (0)
+#define local_irq_disable()	do { raw_local_irq_disable(); } while (0)
+#define local_irq_save(flags)					\
+	do {							\
+		raw_local_irq_save(flags);			\
+	} while (0)
+#define local_irq_restore(flags) do { raw_local_irq_restore(flags); } while (0)
+#define local_save_flags(flags)	do { raw_local_save_flags(flags); } while (0)
+#define irqs_disabled()		(raw_irqs_disabled())
+#define irqs_disabled_flags(flags) (raw_irqs_disabled_flags(flags))
+#define safe_halt()		do { raw_safe_halt(); } while (0)
+
+#endif /* CONFIG_TRACE_IRQFLAGS_SUPPORT */
+
+#endif
diff --git a/include/linux/irqnr.h b/include/linux/irqnr.h
new file mode 100644
index 00000000..3bc4dcab
--- /dev/null
+++ b/include/linux/irqnr.h
@@ -0,0 +1,62 @@
+#ifndef _LINUX_IRQNR_H
+#define _LINUX_IRQNR_H
+
+/*
+ * Generic irq_desc iterators:
+ */
+#ifdef __KERNEL__
+
+#ifndef CONFIG_GENERIC_HARDIRQS
+#include <asm/irq.h>
+
+/*
+ * Wrappers for non-genirq architectures:
+ */
+#define nr_irqs			NR_IRQS
+#define irq_to_desc(irq)	(&irq_desc[irq])
+
+# define for_each_irq_desc(irq, desc)		\
+	for (irq = 0; irq < nr_irqs; irq++)
+
+# define for_each_irq_desc_reverse(irq, desc)                          \
+	for (irq = nr_irqs - 1; irq >= 0; irq--)
+
+#else /* CONFIG_GENERIC_HARDIRQS */
+
+extern int nr_irqs;
+extern struct irq_desc *irq_to_desc(unsigned int irq);
+unsigned int irq_get_next_irq(unsigned int offset);
+
+# define for_each_irq_desc(irq, desc)					\
+	for (irq = 0, desc = irq_to_desc(irq); irq < nr_irqs;		\
+	     irq++, desc = irq_to_desc(irq))				\
+		if (!desc)						\
+			;						\
+		else
+
+
+# define for_each_irq_desc_reverse(irq, desc)				\
+	for (irq = nr_irqs - 1, desc = irq_to_desc(irq); irq >= 0;	\
+	     irq--, desc = irq_to_desc(irq))				\
+		if (!desc)						\
+			;						\
+		else
+
+#ifdef CONFIG_SMP
+#define irq_node(irq)	(irq_get_irq_data(irq)->node)
+#else
+#define irq_node(irq)	0
+#endif
+
+# define for_each_active_irq(irq)			\
+	for (irq = irq_get_next_irq(0); irq < nr_irqs;	\
+	     irq = irq_get_next_irq(irq + 1))
+
+#endif /* CONFIG_GENERIC_HARDIRQS */
+
+#define for_each_irq_nr(irq)                   \
+       for (irq = 0; irq < nr_irqs; irq++)
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/linux/irqreturn.h b/include/linux/irqreturn.h
new file mode 100644
index 00000000..714ba08d
--- /dev/null
+++ b/include/linux/irqreturn.h
@@ -0,0 +1,19 @@
+#ifndef _LINUX_IRQRETURN_H
+#define _LINUX_IRQRETURN_H
+
+/**
+ * enum irqreturn
+ * @IRQ_NONE		interrupt was not from this device
+ * @IRQ_HANDLED		interrupt was handled by this device
+ * @IRQ_WAKE_THREAD	handler requests to wake the handler thread
+ */
+enum irqreturn {
+	IRQ_NONE		= (0 << 0),
+	IRQ_HANDLED		= (1 << 0),
+	IRQ_WAKE_THREAD		= (1 << 1),
+};
+
+typedef enum irqreturn irqreturn_t;
+#define IRQ_RETVAL(x)	((x) != IRQ_NONE)
+
+#endif
diff --git a/include/linux/isa.h b/include/linux/isa.h
new file mode 100644
index 00000000..b0270e38
--- /dev/null
+++ b/include/linux/isa.h
@@ -0,0 +1,39 @@
+/*
+ * ISA bus.
+ */
+
+#ifndef __LINUX_ISA_H
+#define __LINUX_ISA_H
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+
+struct isa_driver {
+	int (*match)(struct device *, unsigned int);
+	int (*probe)(struct device *, unsigned int);
+	int (*remove)(struct device *, unsigned int);
+	void (*shutdown)(struct device *, unsigned int);
+	int (*suspend)(struct device *, unsigned int, pm_message_t);
+	int (*resume)(struct device *, unsigned int);
+
+	struct device_driver driver;
+	struct device *devices;
+};
+
+#define to_isa_driver(x) container_of((x), struct isa_driver, driver)
+
+#ifdef CONFIG_ISA
+int isa_register_driver(struct isa_driver *, unsigned int);
+void isa_unregister_driver(struct isa_driver *);
+#else
+static inline int isa_register_driver(struct isa_driver *d, unsigned int i)
+{
+	return 0;
+}
+
+static inline void isa_unregister_driver(struct isa_driver *d)
+{
+}
+#endif
+
+#endif /* __LINUX_ISA_H */
diff --git a/include/linux/isapnp.h b/include/linux/isapnp.h
new file mode 100644
index 00000000..e2d28b02
--- /dev/null
+++ b/include/linux/isapnp.h
@@ -0,0 +1,125 @@
+/*
+ *  ISA Plug & Play support
+ *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef LINUX_ISAPNP_H
+#define LINUX_ISAPNP_H
+
+#include <linux/errno.h>
+#include <linux/pnp.h>
+
+/*
+ *
+ */
+
+#define ISAPNP_VENDOR(a,b,c)	(((((a)-'A'+1)&0x3f)<<2)|\
+				((((b)-'A'+1)&0x18)>>3)|((((b)-'A'+1)&7)<<13)|\
+				((((c)-'A'+1)&0x1f)<<8))
+#define ISAPNP_DEVICE(x)	((((x)&0xf000)>>8)|\
+				 (((x)&0x0f00)>>8)|\
+				 (((x)&0x00f0)<<8)|\
+				 (((x)&0x000f)<<8))
+#define ISAPNP_FUNCTION(x)	ISAPNP_DEVICE(x)
+
+/*
+ *
+ */
+
+#ifdef __KERNEL__
+#include <linux/mod_devicetable.h>
+
+#define DEVICE_COUNT_COMPATIBLE 4
+
+#define ISAPNP_CARD_DEVS	8
+
+#define ISAPNP_CARD_ID(_va, _vb, _vc, _device) \
+		.card_vendor = ISAPNP_VENDOR(_va, _vb, _vc), .card_device = ISAPNP_DEVICE(_device)
+#define ISAPNP_CARD_END \
+		.card_vendor = 0, .card_device = 0
+#define ISAPNP_DEVICE_ID(_va, _vb, _vc, _function) \
+		{ .vendor = ISAPNP_VENDOR(_va, _vb, _vc), .function = ISAPNP_FUNCTION(_function) }
+
+/* export used IDs outside module */
+#define ISAPNP_CARD_TABLE(name) \
+		MODULE_GENERIC_TABLE(isapnp_card, name)
+
+struct isapnp_card_id {
+	unsigned long driver_data;	/* data private to the driver */
+	unsigned short card_vendor, card_device;
+	struct {
+		unsigned short vendor, function;
+	} devs[ISAPNP_CARD_DEVS];	/* logical devices */
+};
+
+#define ISAPNP_DEVICE_SINGLE(_cva, _cvb, _cvc, _cdevice, _dva, _dvb, _dvc, _dfunction) \
+		.card_vendor = ISAPNP_VENDOR(_cva, _cvb, _cvc), .card_device =  ISAPNP_DEVICE(_cdevice), \
+		.vendor = ISAPNP_VENDOR(_dva, _dvb, _dvc), .function = ISAPNP_FUNCTION(_dfunction)
+#define ISAPNP_DEVICE_SINGLE_END \
+		.card_vendor = 0, .card_device = 0
+
+#if defined(CONFIG_ISAPNP) || (defined(CONFIG_ISAPNP_MODULE) && defined(MODULE))
+
+#define __ISAPNP__
+
+/* lowlevel configuration */
+int isapnp_present(void);
+int isapnp_cfg_begin(int csn, int device);
+int isapnp_cfg_end(void);
+unsigned char isapnp_read_byte(unsigned char idx);
+void isapnp_write_byte(unsigned char idx, unsigned char val);
+
+#ifdef CONFIG_PROC_FS
+int isapnp_proc_init(void);
+int isapnp_proc_done(void);
+#else
+static inline int isapnp_proc_init(void) { return 0; }
+static inline int isapnp_proc_done(void) { return 0; }
+#endif
+
+/* compat */
+struct pnp_card *pnp_find_card(unsigned short vendor,
+			       unsigned short device,
+			       struct pnp_card *from);
+struct pnp_dev *pnp_find_dev(struct pnp_card *card,
+			     unsigned short vendor,
+			     unsigned short function,
+			     struct pnp_dev *from);
+
+#else /* !CONFIG_ISAPNP */
+
+/* lowlevel configuration */
+static inline int isapnp_present(void) { return 0; }
+static inline int isapnp_cfg_begin(int csn, int device) { return -ENODEV; }
+static inline int isapnp_cfg_end(void) { return -ENODEV; }
+static inline unsigned char isapnp_read_byte(unsigned char idx) { return 0xff; }
+static inline void isapnp_write_byte(unsigned char idx, unsigned char val) { ; }
+
+static inline struct pnp_card *pnp_find_card(unsigned short vendor,
+					     unsigned short device,
+					     struct pnp_card *from) { return NULL; }
+static inline struct pnp_dev *pnp_find_dev(struct pnp_card *card,
+					   unsigned short vendor,
+					   unsigned short function,
+					   struct pnp_dev *from) { return NULL; }
+
+#endif /* CONFIG_ISAPNP */
+
+#endif /* __KERNEL__ */
+#endif /* LINUX_ISAPNP_H */
diff --git a/include/linux/iscsi_boot_sysfs.h b/include/linux/iscsi_boot_sysfs.h
new file mode 100644
index 00000000..2a8b1659
--- /dev/null
+++ b/include/linux/iscsi_boot_sysfs.h
@@ -0,0 +1,133 @@
+/*
+ * Export the iSCSI boot info to userland via sysfs.
+ *
+ * Copyright (C) 2010 Red Hat, Inc.  All rights reserved.
+ * Copyright (C) 2010 Mike Christie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef _ISCSI_BOOT_SYSFS_
+#define _ISCSI_BOOT_SYSFS_
+
+/*
+ * The text attributes names for each of the kobjects.
+*/
+enum iscsi_boot_eth_properties_enum {
+	ISCSI_BOOT_ETH_INDEX,
+	ISCSI_BOOT_ETH_FLAGS,
+	ISCSI_BOOT_ETH_IP_ADDR,
+	ISCSI_BOOT_ETH_SUBNET_MASK,
+	ISCSI_BOOT_ETH_ORIGIN,
+	ISCSI_BOOT_ETH_GATEWAY,
+	ISCSI_BOOT_ETH_PRIMARY_DNS,
+	ISCSI_BOOT_ETH_SECONDARY_DNS,
+	ISCSI_BOOT_ETH_DHCP,
+	ISCSI_BOOT_ETH_VLAN,
+	ISCSI_BOOT_ETH_MAC,
+	/* eth_pci_bdf - this is replaced by link to the device itself. */
+	ISCSI_BOOT_ETH_HOSTNAME,
+	ISCSI_BOOT_ETH_END_MARKER,
+};
+
+enum iscsi_boot_tgt_properties_enum {
+	ISCSI_BOOT_TGT_INDEX,
+	ISCSI_BOOT_TGT_FLAGS,
+	ISCSI_BOOT_TGT_IP_ADDR,
+	ISCSI_BOOT_TGT_PORT,
+	ISCSI_BOOT_TGT_LUN,
+	ISCSI_BOOT_TGT_CHAP_TYPE,
+	ISCSI_BOOT_TGT_NIC_ASSOC,
+	ISCSI_BOOT_TGT_NAME,
+	ISCSI_BOOT_TGT_CHAP_NAME,
+	ISCSI_BOOT_TGT_CHAP_SECRET,
+	ISCSI_BOOT_TGT_REV_CHAP_NAME,
+	ISCSI_BOOT_TGT_REV_CHAP_SECRET,
+	ISCSI_BOOT_TGT_END_MARKER,
+};
+
+enum iscsi_boot_initiator_properties_enum {
+	ISCSI_BOOT_INI_INDEX,
+	ISCSI_BOOT_INI_FLAGS,
+	ISCSI_BOOT_INI_ISNS_SERVER,
+	ISCSI_BOOT_INI_SLP_SERVER,
+	ISCSI_BOOT_INI_PRI_RADIUS_SERVER,
+	ISCSI_BOOT_INI_SEC_RADIUS_SERVER,
+	ISCSI_BOOT_INI_INITIATOR_NAME,
+	ISCSI_BOOT_INI_END_MARKER,
+};
+
+struct attribute_group;
+
+struct iscsi_boot_kobj {
+	struct kobject kobj;
+	struct attribute_group *attr_group;
+	struct list_head list;
+
+	/*
+	 * Pointer to store driver specific info. If set this will
+	 * be freed for the LLD when the kobj release function is called.
+	 */
+	void *data;
+	/*
+	 * Driver specific show function.
+	 *
+	 * The enum of the type. This can be any value of the above
+	 * properties.
+	 */
+	ssize_t (*show) (void *data, int type, char *buf);
+
+	/*
+	 * Drivers specific visibility function.
+	 * The function should return if they the attr should be readable
+	 * writable or should not be shown.
+	 *
+	 * The enum of the type. This can be any value of the above
+	 * properties.
+	 */
+	umode_t (*is_visible) (void *data, int type);
+
+	/*
+	 * Driver specific release function.
+	 *
+	 * The function should free the data passed in.
+	 */
+	void (*release) (void *data);
+};
+
+struct iscsi_boot_kset {
+	struct list_head kobj_list;
+	struct kset *kset;
+};
+
+struct iscsi_boot_kobj *
+iscsi_boot_create_initiator(struct iscsi_boot_kset *boot_kset, int index,
+			    void *data,
+			    ssize_t (*show) (void *data, int type, char *buf),
+			    umode_t (*is_visible) (void *data, int type),
+			    void (*release) (void *data));
+
+struct iscsi_boot_kobj *
+iscsi_boot_create_ethernet(struct iscsi_boot_kset *boot_kset, int index,
+			   void *data,
+			   ssize_t (*show) (void *data, int type, char *buf),
+			   umode_t (*is_visible) (void *data, int type),
+			   void (*release) (void *data));
+struct iscsi_boot_kobj *
+iscsi_boot_create_target(struct iscsi_boot_kset *boot_kset, int index,
+			 void *data,
+			 ssize_t (*show) (void *data, int type, char *buf),
+			 umode_t (*is_visible) (void *data, int type),
+			 void (*release) (void *data));
+
+struct iscsi_boot_kset *iscsi_boot_create_kset(const char *set_name);
+struct iscsi_boot_kset *iscsi_boot_create_host_kset(unsigned int hostno);
+void iscsi_boot_destroy_kset(struct iscsi_boot_kset *boot_kset);
+
+#endif
diff --git a/include/linux/iscsi_ibft.h b/include/linux/iscsi_ibft.h
new file mode 100644
index 00000000..8ba7e5b9
--- /dev/null
+++ b/include/linux/iscsi_ibft.h
@@ -0,0 +1,46 @@
+/*
+ *  Copyright 2007 Red Hat, Inc.
+ *  by Peter Jones <pjones@redhat.com>
+ *  Copyright 2007 IBM, Inc.
+ *  by Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
+ *  Copyright 2008
+ *  by Konrad Rzeszutek <ketuzsezr@darnok.org>
+ *
+ * This code exposes the iSCSI Boot Format Table to userland via sysfs.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef ISCSI_IBFT_H
+#define ISCSI_IBFT_H
+
+#include <acpi/acpi.h>
+
+/*
+ * Logical location of iSCSI Boot Format Table.
+ * If the value is NULL there is no iBFT on the machine.
+ */
+extern struct acpi_table_ibft *ibft_addr;
+
+/*
+ * Routine used to find and reserve the iSCSI Boot Format Table. The
+ * mapped address is set in the ibft_addr variable.
+ */
+#ifdef CONFIG_ISCSI_IBFT_FIND
+unsigned long find_ibft_region(unsigned long *sizep);
+#else
+static inline unsigned long find_ibft_region(unsigned long *sizep)
+{
+	*sizep = 0;
+	return 0;
+}
+#endif
+
+#endif /* ISCSI_IBFT_H */
diff --git a/include/linux/isdn.h b/include/linux/isdn.h
new file mode 100644
index 00000000..292f27a7
--- /dev/null
+++ b/include/linux/isdn.h
@@ -0,0 +1,622 @@
+/* $Id: isdn.h,v 1.125.2.3 2004/02/10 01:07:14 keil Exp $
+ *
+ * Main header for the Linux ISDN subsystem (linklevel).
+ *
+ * Copyright 1994,95,96 by Fritz Elfert (fritz@isdn4linux.de)
+ * Copyright 1995,96    by Thinking Objects Software GmbH Wuerzburg
+ * Copyright 1995,96    by Michael Hipp (Michael.Hipp@student.uni-tuebingen.de)
+ * 
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef __ISDN_H__
+#define __ISDN_H__
+
+#include <linux/ioctl.h>
+
+#define ISDN_MAX_DRIVERS    32
+#define ISDN_MAX_CHANNELS   64
+
+/* New ioctl-codes */
+#define IIOCNETAIF  _IO('I',1)
+#define IIOCNETDIF  _IO('I',2)
+#define IIOCNETSCF  _IO('I',3)
+#define IIOCNETGCF  _IO('I',4)
+#define IIOCNETANM  _IO('I',5)
+#define IIOCNETDNM  _IO('I',6)
+#define IIOCNETGNM  _IO('I',7)
+#define IIOCGETSET  _IO('I',8) /* no longer supported */
+#define IIOCSETSET  _IO('I',9) /* no longer supported */
+#define IIOCSETVER  _IO('I',10)
+#define IIOCNETHUP  _IO('I',11)
+#define IIOCSETGST  _IO('I',12)
+#define IIOCSETBRJ  _IO('I',13)
+#define IIOCSIGPRF  _IO('I',14)
+#define IIOCGETPRF  _IO('I',15)
+#define IIOCSETPRF  _IO('I',16)
+#define IIOCGETMAP  _IO('I',17)
+#define IIOCSETMAP  _IO('I',18)
+#define IIOCNETASL  _IO('I',19)
+#define IIOCNETDIL  _IO('I',20)
+#define IIOCGETCPS  _IO('I',21)
+#define IIOCGETDVR  _IO('I',22)
+#define IIOCNETLCR  _IO('I',23) /* dwabc ioctl for LCR from isdnlog */
+#define IIOCNETDWRSET  _IO('I',24) /* dwabc ioctl to reset abc-values to default on a net-interface */
+
+#define IIOCNETALN  _IO('I',32)
+#define IIOCNETDLN  _IO('I',33)
+
+#define IIOCNETGPN  _IO('I',34)
+
+#define IIOCDBGVAR  _IO('I',127)
+
+#define IIOCDRVCTL  _IO('I',128)
+
+/* cisco hdlck device private ioctls */
+#define SIOCGKEEPPERIOD	(SIOCDEVPRIVATE + 0)
+#define SIOCSKEEPPERIOD	(SIOCDEVPRIVATE + 1)
+#define SIOCGDEBSERINT	(SIOCDEVPRIVATE + 2)
+#define SIOCSDEBSERINT	(SIOCDEVPRIVATE + 3)
+
+/* Packet encapsulations for net-interfaces */
+#define ISDN_NET_ENCAP_ETHER      0
+#define ISDN_NET_ENCAP_RAWIP      1
+#define ISDN_NET_ENCAP_IPTYP      2
+#define ISDN_NET_ENCAP_CISCOHDLC  3 /* Without SLARP and keepalive */
+#define ISDN_NET_ENCAP_SYNCPPP    4
+#define ISDN_NET_ENCAP_UIHDLC     5
+#define ISDN_NET_ENCAP_CISCOHDLCK 6 /* With SLARP and keepalive    */
+#define ISDN_NET_ENCAP_X25IFACE   7 /* Documentation/networking/x25-iface.txt */
+#define ISDN_NET_ENCAP_MAX_ENCAP  ISDN_NET_ENCAP_X25IFACE
+
+/* Facility which currently uses an ISDN-channel */
+#define ISDN_USAGE_NONE       0
+#define ISDN_USAGE_RAW        1
+#define ISDN_USAGE_MODEM      2
+#define ISDN_USAGE_NET        3
+#define ISDN_USAGE_VOICE      4
+#define ISDN_USAGE_FAX        5
+#define ISDN_USAGE_MASK       7 /* Mask to get plain usage */
+#define ISDN_USAGE_DISABLED  32 /* This bit is set, if channel is disabled */
+#define ISDN_USAGE_EXCLUSIVE 64 /* This bit is set, if channel is exclusive */
+#define ISDN_USAGE_OUTGOING 128 /* This bit is set, if channel is outgoing  */
+
+#define ISDN_MODEM_NUMREG    24        /* Number of Modem-Registers        */
+#define ISDN_LMSNLEN         255 /* Length of tty's Listen-MSN string */
+#define ISDN_CMSGLEN	     50	 /* Length of CONNECT-Message to add for Modem */
+
+#define ISDN_MSNLEN          32
+#define NET_DV 0x06  /* Data version for isdn_net_ioctl_cfg   */
+#define TTY_DV 0x06  /* Data version for iprofd etc.          */
+
+#define INF_DV 0x01  /* Data version for /dev/isdninfo        */
+
+typedef struct {
+  char drvid[25];
+  unsigned long arg;
+} isdn_ioctl_struct;
+
+typedef struct {
+  char name[10];
+  char phone[ISDN_MSNLEN];
+  int  outgoing;
+} isdn_net_ioctl_phone;
+
+typedef struct {
+  char name[10];     /* Name of interface                     */
+  char master[10];   /* Name of Master for Bundling           */
+  char slave[10];    /* Name of Slave for Bundling            */
+  char eaz[256];     /* EAZ/MSN                               */
+  char drvid[25];    /* DriverId for Bindings                 */
+  int  onhtime;      /* Hangup-Timeout                        */
+  int  charge;       /* Charge-Units                          */
+  int  l2_proto;     /* Layer-2 protocol                      */
+  int  l3_proto;     /* Layer-3 protocol                      */
+  int  p_encap;      /* Encapsulation                         */
+  int  exclusive;    /* Channel, if bound exclusive           */
+  int  dialmax;      /* Dial Retry-Counter                    */
+  int  slavedelay;   /* Delay until slave starts up           */
+  int  cbdelay;      /* Delay before Callback                 */
+  int  chargehup;    /* Flag: Charge-Hangup                   */
+  int  ihup;         /* Flag: Hangup-Timeout on incoming line */
+  int  secure;       /* Flag: Secure                          */
+  int  callback;     /* Flag: Callback                        */
+  int  cbhup;        /* Flag: Reject Call before Callback     */
+  int  pppbind;      /* ippp device for bindings              */
+  int  chargeint;    /* Use fixed charge interval length      */
+  int  triggercps;   /* BogoCPS needed for triggering slave   */
+  int  dialtimeout;  /* Dial-Timeout                          */
+  int  dialwait;     /* Time to wait after failed dial        */
+  int  dialmode;     /* Flag: off / on / auto                 */
+} isdn_net_ioctl_cfg;
+
+#define ISDN_NET_DIALMODE_MASK  0xC0    /* bits for status                */
+#define ISDN_NET_DM_OFF	        0x00    /* this interface is stopped      */
+#define ISDN_NET_DM_MANUAL	0x40    /* this interface is on (manual)  */
+#define ISDN_NET_DM_AUTO	0x80    /* this interface is autodial     */
+#define ISDN_NET_DIALMODE(x) ((&(x))->flags & ISDN_NET_DIALMODE_MASK)
+
+#ifdef __KERNEL__
+
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/major.h>
+#include <asm/io.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/wait.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_reg.h>
+#include <linux/fcntl.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ip.h>
+#include <linux/in.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/tcp.h>
+#include <linux/mutex.h>
+
+#define ISDN_TTY_MAJOR    43
+#define ISDN_TTYAUX_MAJOR 44
+#define ISDN_MAJOR        45
+
+/* The minor-devicenumbers for Channel 0 and 1 are used as arguments for
+ * physical Channel-Mapping, so they MUST NOT be changed without changing
+ * the correspondent code in isdn.c
+ */
+
+#define ISDN_MINOR_B        0
+#define ISDN_MINOR_BMAX     (ISDN_MAX_CHANNELS-1)
+#define ISDN_MINOR_CTRL     64
+#define ISDN_MINOR_CTRLMAX  (64 + (ISDN_MAX_CHANNELS-1))
+#define ISDN_MINOR_PPP      128
+#define ISDN_MINOR_PPPMAX   (128 + (ISDN_MAX_CHANNELS-1))
+#define ISDN_MINOR_STATUS   255
+
+#ifdef CONFIG_ISDN_PPP
+
+#ifdef CONFIG_ISDN_PPP_VJ
+#  include <net/slhc_vj.h>
+#endif
+
+#include <linux/ppp_defs.h>
+#include <linux/ppp-ioctl.h>
+
+#include <linux/isdn_ppp.h>
+#endif
+
+#ifdef CONFIG_ISDN_X25
+#  include <linux/concap.h>
+#endif
+
+#include <linux/isdnif.h>
+
+#define ISDN_DRVIOCTL_MASK       0x7f  /* Mask for Device-ioctl */
+
+/* Until now unused */
+#define ISDN_SERVICE_VOICE 1
+#define ISDN_SERVICE_AB    1<<1 
+#define ISDN_SERVICE_X21   1<<2
+#define ISDN_SERVICE_G4    1<<3
+#define ISDN_SERVICE_BTX   1<<4
+#define ISDN_SERVICE_DFUE  1<<5
+#define ISDN_SERVICE_X25   1<<6
+#define ISDN_SERVICE_TTX   1<<7
+#define ISDN_SERVICE_MIXED 1<<8
+#define ISDN_SERVICE_FW    1<<9
+#define ISDN_SERVICE_GTEL  1<<10
+#define ISDN_SERVICE_BTXN  1<<11
+#define ISDN_SERVICE_BTEL  1<<12
+
+/* Macros checking plain usage */
+#define USG_NONE(x)         ((x & ISDN_USAGE_MASK)==ISDN_USAGE_NONE)
+#define USG_RAW(x)          ((x & ISDN_USAGE_MASK)==ISDN_USAGE_RAW)
+#define USG_MODEM(x)        ((x & ISDN_USAGE_MASK)==ISDN_USAGE_MODEM)
+#define USG_VOICE(x)        ((x & ISDN_USAGE_MASK)==ISDN_USAGE_VOICE)
+#define USG_NET(x)          ((x & ISDN_USAGE_MASK)==ISDN_USAGE_NET)
+#define USG_FAX(x)          ((x & ISDN_USAGE_MASK)==ISDN_USAGE_FAX)
+#define USG_OUTGOING(x)     ((x & ISDN_USAGE_OUTGOING)==ISDN_USAGE_OUTGOING)
+#define USG_MODEMORVOICE(x) (((x & ISDN_USAGE_MASK)==ISDN_USAGE_MODEM) || \
+                             ((x & ISDN_USAGE_MASK)==ISDN_USAGE_VOICE)     )
+
+/* Timer-delays and scheduling-flags */
+#define ISDN_TIMER_RES         4                         /* Main Timer-Resolution   */
+#define ISDN_TIMER_02SEC       (HZ/ISDN_TIMER_RES/5)     /* Slow-Timer1 .2 sec      */
+#define ISDN_TIMER_1SEC        (HZ/ISDN_TIMER_RES)       /* Slow-Timer2 1 sec       */
+#define ISDN_TIMER_RINGING     5 /* tty RINGs = ISDN_TIMER_1SEC * this factor       */
+#define ISDN_TIMER_KEEPINT    10 /* Cisco-Keepalive = ISDN_TIMER_1SEC * this factor */
+#define ISDN_TIMER_MODEMREAD   1
+#define ISDN_TIMER_MODEMPLUS   2
+#define ISDN_TIMER_MODEMRING   4
+#define ISDN_TIMER_MODEMXMIT   8
+#define ISDN_TIMER_NETDIAL    16 
+#define ISDN_TIMER_NETHANGUP  32
+#define ISDN_TIMER_CARRIER   256 /* Wait for Carrier */
+#define ISDN_TIMER_FAST      (ISDN_TIMER_MODEMREAD | ISDN_TIMER_MODEMPLUS | \
+                              ISDN_TIMER_MODEMXMIT)
+#define ISDN_TIMER_SLOW      (ISDN_TIMER_MODEMRING | ISDN_TIMER_NETHANGUP | \
+                              ISDN_TIMER_NETDIAL | ISDN_TIMER_CARRIER)
+
+/* Timeout-Values for isdn_net_dial() */
+#define ISDN_TIMER_DTIMEOUT10 (10*HZ/(ISDN_TIMER_02SEC*(ISDN_TIMER_RES+1)))
+#define ISDN_TIMER_DTIMEOUT15 (15*HZ/(ISDN_TIMER_02SEC*(ISDN_TIMER_RES+1)))
+#define ISDN_TIMER_DTIMEOUT60 (60*HZ/(ISDN_TIMER_02SEC*(ISDN_TIMER_RES+1)))
+
+/* GLOBAL_FLAGS */
+#define ISDN_GLOBAL_STOPPED 1
+
+/*=================== Start of ip-over-ISDN stuff =========================*/
+
+/* Feature- and status-flags for a net-interface */
+#define ISDN_NET_CONNECTED  0x01       /* Bound to ISDN-Channel             */
+#define ISDN_NET_SECURE     0x02       /* Accept calls from phonelist only  */
+#define ISDN_NET_CALLBACK   0x04       /* activate callback                 */
+#define ISDN_NET_CBHUP      0x08       /* hangup before callback            */
+#define ISDN_NET_CBOUT      0x10       /* remote machine does callback      */
+
+#define ISDN_NET_MAGIC      0x49344C02 /* for paranoia-checking             */
+
+/* Phone-list-element */
+typedef struct {
+  void *next;
+  char num[ISDN_MSNLEN];
+} isdn_net_phone;
+
+/*
+   Principles when extending structures for generic encapsulation protocol
+   ("concap") support:
+   - Stuff which is hardware specific (here i4l-specific) goes in 
+     the netdev -> local structure (here: isdn_net_local)
+   - Stuff which is encapsulation protocol specific goes in the structure
+     which holds the linux device structure (here: isdn_net_device)
+*/
+
+/* Local interface-data */
+typedef struct isdn_net_local_s {
+  ulong                  magic;
+  struct net_device_stats stats;       /* Ethernet Statistics              */
+  int                    isdn_device;  /* Index to isdn-device             */
+  int                    isdn_channel; /* Index to isdn-channel            */
+  int			 ppp_slot;     /* PPPD device slot number          */
+  int                    pre_device;   /* Preselected isdn-device          */
+  int                    pre_channel;  /* Preselected isdn-channel         */
+  int                    exclusive;    /* If non-zero idx to reserved chan.*/
+  int                    flags;        /* Connection-flags                 */
+  int                    dialretry;    /* Counter for Dialout-retries      */
+  int                    dialmax;      /* Max. Number of Dial-retries      */
+  int                    cbdelay;      /* Delay before Callback starts     */
+  int                    dtimer;       /* Timeout-counter for dialing      */
+  char                   msn[ISDN_MSNLEN]; /* MSNs/EAZs for this interface */
+  u_char                 cbhup;        /* Flag: Reject Call before Callback*/
+  u_char                 dialstate;    /* State for dialing                */
+  u_char                 p_encap;      /* Packet encapsulation             */
+                                       /*   0 = Ethernet over ISDN         */
+				       /*   1 = RAW-IP                     */
+                                       /*   2 = IP with type field         */
+  u_char                 l2_proto;     /* Layer-2-protocol                 */
+				       /* See ISDN_PROTO_L2..-constants in */
+                                       /* isdnif.h                         */
+                                       /*   0 = X75/LAPB with I-Frames     */
+				       /*   1 = X75/LAPB with UI-Frames    */
+				       /*   2 = X75/LAPB with BUI-Frames   */
+				       /*   3 = HDLC                       */
+  u_char                 l3_proto;     /* Layer-3-protocol                 */
+				       /* See ISDN_PROTO_L3..-constants in */
+                                       /* isdnif.h                         */
+                                       /*   0 = Transparent                */
+  int                    huptimer;     /* Timeout-counter for auto-hangup  */
+  int                    charge;       /* Counter for charging units       */
+  ulong                  chargetime;   /* Timer for Charging info          */
+  int                    hupflags;     /* Flags for charge-unit-hangup:    */
+				       /* bit0: chargeint is invalid       */
+				       /* bit1: Getting charge-interval    */
+                                       /* bit2: Do charge-unit-hangup      */
+                                       /* bit3: Do hangup even on incoming */
+  int                    outgoing;     /* Flag: outgoing call              */
+  int                    onhtime;      /* Time to keep link up             */
+  int                    chargeint;    /* Interval between charge-infos    */
+  int                    onum;         /* Flag: at least 1 outgoing number */
+  int                    cps;          /* current speed of this interface  */
+  int                    transcount;   /* byte-counter for cps-calculation */
+  int                    sqfull;       /* Flag: netdev-queue overloaded    */
+  ulong                  sqfull_stamp; /* Start-Time of overload           */
+  ulong                  slavedelay;   /* Dynamic bundling delaytime       */
+  int                    triggercps;   /* BogoCPS needed for trigger slave */
+  isdn_net_phone         *phone[2];    /* List of remote-phonenumbers      */
+				       /* phone[0] = Incoming Numbers      */
+				       /* phone[1] = Outgoing Numbers      */
+  isdn_net_phone         *dial;        /* Pointer to dialed number         */
+  struct net_device      *master;      /* Ptr to Master device for slaves  */
+  struct net_device      *slave;       /* Ptr to Slave device for masters  */
+  struct isdn_net_local_s *next;       /* Ptr to next link in bundle       */
+  struct isdn_net_local_s *last;       /* Ptr to last link in bundle       */
+  struct isdn_net_dev_s  *netdev;      /* Ptr to netdev                    */
+  struct sk_buff_head    super_tx_queue; /* List of supervisory frames to  */
+	                               /* be transmitted asap              */
+  atomic_t frame_cnt;                  /* number of frames currently       */
+                        	       /* queued in HL driver              */    
+                                       /* Ptr to orig. hard_header_cache   */
+  spinlock_t             xmit_lock;    /* used to protect the xmit path of */
+                                       /* a particular channel (including  */
+                                       /* the frame_cnt                    */
+
+  int  pppbind;                        /* ippp device for bindings         */
+  int					dialtimeout;	/* How long shall we try on dialing? (jiffies) */
+  int					dialwait;		/* How long shall we wait after failed attempt? (jiffies) */
+  ulong					dialstarted;	/* jiffies of first dialing-attempt */
+  ulong					dialwait_timer;	/* jiffies of earliest next dialing-attempt */
+  int					huptimeout;		/* How long will the connection be up? (seconds) */
+#ifdef CONFIG_ISDN_X25
+  struct concap_device_ops *dops;      /* callbacks used by encapsulator   */
+#endif
+  /* use an own struct for that in later versions */
+  ulong cisco_myseq;                   /* Local keepalive seq. for Cisco   */
+  ulong cisco_mineseen;                /* returned keepalive seq. from remote */
+  ulong cisco_yourseq;                 /* Remote keepalive seq. for Cisco  */
+  int cisco_keepalive_period;		/* keepalive period */
+  ulong cisco_last_slarp_in;		/* jiffie of last keepalive packet we received */
+  char cisco_line_state;		/* state of line according to keepalive packets */
+  char cisco_debserint;			/* debugging flag of cisco hdlc with slarp */
+  struct timer_list cisco_timer;
+  struct work_struct tqueue;
+} isdn_net_local;
+
+/* the interface itself */
+typedef struct isdn_net_dev_s {
+  isdn_net_local *local;
+  isdn_net_local *queue;               /* circular list of all bundled
+					  channels, which are currently
+					  online                           */
+  spinlock_t queue_lock;               /* lock to protect queue            */
+  void *next;                          /* Pointer to next isdn-interface   */
+  struct net_device *dev;              /* interface to upper levels        */
+#ifdef CONFIG_ISDN_PPP
+  ippp_bundle * pb;		/* pointer to the common bundle structure
+   			         * with the per-bundle data */
+#endif
+#ifdef CONFIG_ISDN_X25
+  struct concap_proto  *cprot; /* connection oriented encapsulation protocol */
+#endif
+
+} isdn_net_dev;
+
+/*===================== End of ip-over-ISDN stuff ===========================*/
+
+/*======================= Start of ISDN-tty stuff ===========================*/
+
+#define ISDN_ASYNC_MAGIC          0x49344C01 /* for paranoia-checking        */
+#define ISDN_ASYNC_INITIALIZED	  0x80000000 /* port was initialized         */
+#define ISDN_ASYNC_CALLOUT_ACTIVE 0x40000000 /* Call out device active       */
+#define ISDN_ASYNC_NORMAL_ACTIVE  0x20000000 /* Normal device active         */
+#define ISDN_ASYNC_CLOSING	  0x08000000 /* Serial port is closing       */
+#define ISDN_ASYNC_CTS_FLOW	  0x04000000 /* Do CTS flow control          */
+#define ISDN_ASYNC_CHECK_CD	  0x02000000 /* i.e., CLOCAL                 */
+#define ISDN_ASYNC_HUP_NOTIFY         0x0001 /* Notify tty on hangups/closes */
+#define ISDN_ASYNC_SESSION_LOCKOUT    0x0100 /* Lock cua opens on session    */
+#define ISDN_ASYNC_PGRP_LOCKOUT       0x0200 /* Lock cua opens on pgrp       */
+#define ISDN_ASYNC_CALLOUT_NOHUP      0x0400 /* No hangup for cui            */
+#define ISDN_ASYNC_SPLIT_TERMIOS      0x0008 /* Sep. termios for dialin/out  */
+#define ISDN_SERIAL_XMIT_SIZE           1024 /* Default bufsize for write    */
+#define ISDN_SERIAL_XMIT_MAX            4000 /* Maximum bufsize for write    */
+#define ISDN_SERIAL_TYPE_NORMAL            1
+#define ISDN_SERIAL_TYPE_CALLOUT           2
+
+#ifdef CONFIG_ISDN_AUDIO
+/* For using sk_buffs with audio we need some private variables
+ * within each sk_buff. For this purpose, we declare a struct here,
+ * and put it always at the private skb->cb data array. A few macros help
+ * accessing the variables.
+ */
+typedef struct _isdn_audio_data {
+  unsigned short dle_count;
+  unsigned char  lock;
+} isdn_audio_data_t;
+
+#define ISDN_AUDIO_SKB_DLECOUNT(skb)	(((isdn_audio_data_t *)&skb->cb[0])->dle_count)
+#define ISDN_AUDIO_SKB_LOCK(skb)	(((isdn_audio_data_t *)&skb->cb[0])->lock)
+#endif
+
+/* Private data of AT-command-interpreter */
+typedef struct atemu {
+	u_char       profile[ISDN_MODEM_NUMREG]; /* Modem-Regs. Profile 0              */
+	u_char       mdmreg[ISDN_MODEM_NUMREG];  /* Modem-Registers                    */
+	char         pmsn[ISDN_MSNLEN];          /* EAZ/MSNs Profile 0                 */
+	char         msn[ISDN_MSNLEN];           /* EAZ/MSN                            */
+	char         plmsn[ISDN_LMSNLEN];        /* Listening MSNs Profile 0           */
+	char         lmsn[ISDN_LMSNLEN];         /* Listening MSNs                     */
+	char         cpn[ISDN_MSNLEN];           /* CalledPartyNumber on incoming call */
+	char         connmsg[ISDN_CMSGLEN];	 /* CONNECT-Msg from HL-Driver	       */
+#ifdef CONFIG_ISDN_AUDIO
+	u_char       vpar[10];                   /* Voice-parameters                   */
+	int          lastDLE;                    /* Flag for voice-coding: DLE seen    */
+#endif
+	int          mdmcmdl;                    /* Length of Modem-Commandbuffer      */
+	int          pluscount;                  /* Counter for +++ sequence           */
+	u_long       lastplus;                   /* Timestamp of last +                */
+	int	     carrierwait;                /* Seconds of carrier waiting         */
+	char         mdmcmd[255];                /* Modem-Commandbuffer                */
+	unsigned int charge;                     /* Charge units of current connection */
+} atemu;
+
+/* Private data (similar to async_struct in <linux/serial.h>) */
+typedef struct modem_info {
+  int			magic;
+  struct module		*owner;
+  int			flags;		 /* defined in tty.h               */
+  int			x_char;		 /* xon/xoff character             */
+  int			mcr;		 /* Modem control register         */
+  int                   msr;             /* Modem status register          */
+  int                   lsr;             /* Line status register           */
+  int			line;
+  int			count;		 /* # of fd on device              */
+  int			blocked_open;	 /* # of blocked opens             */
+  long			session;	 /* Session of opening process     */
+  long			pgrp;		 /* pgrp of opening process        */
+  int                   online;          /* 1 = B-Channel is up, drop data */
+					 /* 2 = B-Channel is up, deliver d.*/
+  int                   dialing;         /* Dial in progress or ATA        */
+  int                   rcvsched;        /* Receive needs schedule         */
+  int                   isdn_driver;	 /* Index to isdn-driver           */
+  int                   isdn_channel;    /* Index to isdn-channel          */
+  int                   drv_index;       /* Index to dev->usage            */
+  int                   ncarrier;        /* Flag: schedule NO CARRIER      */
+  unsigned char         last_cause[8];   /* Last cause message             */
+  unsigned char         last_num[ISDN_MSNLEN];
+	                                 /* Last phone-number              */
+  unsigned char         last_l2;         /* Last layer-2 protocol          */
+  unsigned char         last_si;         /* Last service                   */
+  unsigned char         last_lhup;       /* Last hangup local?             */
+  unsigned char         last_dir;        /* Last direction (in or out)     */
+  struct timer_list     nc_timer;        /* Timer for delayed NO CARRIER   */
+  int                   send_outstanding;/* # of outstanding send-requests */
+  int                   xmit_size;       /* max. # of chars in xmit_buf    */
+  int                   xmit_count;      /* # of chars in xmit_buf         */
+  unsigned char         *xmit_buf;       /* transmit buffer                */
+  struct sk_buff_head   xmit_queue;      /* transmit queue                 */
+  atomic_t              xmit_lock;       /* Semaphore for isdn_tty_write   */
+#ifdef CONFIG_ISDN_AUDIO
+  int                   vonline;         /* Voice-channel status           */
+					 /* Bit 0 = recording              */
+					 /* Bit 1 = playback               */
+					 /* Bit 2 = playback, DLE-ETX seen */
+  struct sk_buff_head   dtmf_queue;      /* queue for dtmf results         */
+  void                  *adpcms;         /* state for adpcm decompression  */
+  void                  *adpcmr;         /* state for adpcm compression    */
+  void                  *dtmf_state;     /* state for dtmf decoder         */
+  void                  *silence_state;  /* state for silence detection    */
+#endif
+#ifdef CONFIG_ISDN_TTY_FAX
+  struct T30_s		*fax;		 /* T30 Fax Group 3 data/interface */
+  int			faxonline;	 /* Fax-channel status             */
+#endif
+  struct tty_struct 	*tty;            /* Pointer to corresponding tty   */
+  atemu                 emu;             /* AT-emulator data               */
+  struct ktermios	normal_termios;  /* For saving termios structs     */
+  struct ktermios	callout_termios;
+  wait_queue_head_t	open_wait, close_wait;
+  spinlock_t	        readlock;
+} modem_info;
+
+#define ISDN_MODEM_WINSIZE 8
+
+/* Description of one ISDN-tty */
+typedef struct _isdn_modem {
+  int                refcount;				/* Number of opens        */
+  struct tty_driver  *tty_modem;			/* tty-device             */
+  struct tty_struct  *modem_table[ISDN_MAX_CHANNELS];	/* ?? copied from Orig    */
+  struct ktermios     *modem_termios[ISDN_MAX_CHANNELS];
+  struct ktermios     *modem_termios_locked[ISDN_MAX_CHANNELS];
+  modem_info         info[ISDN_MAX_CHANNELS];	   /* Private data           */
+} isdn_modem_t;
+
+/*======================= End of ISDN-tty stuff ============================*/
+
+/*======================== Start of V.110 stuff ============================*/
+#define V110_BUFSIZE 1024
+
+typedef struct {
+	int nbytes;                    /* 1 Matrixbyte -> nbytes in stream     */
+	int nbits;                     /* Number of used bits in streambyte    */
+	unsigned char key;             /* Bitmask in stream eg. 11 (nbits=2)   */
+	int decodelen;                 /* Amount of data in decodebuf          */
+	int SyncInit;                  /* Number of sync frames to send        */
+	unsigned char *OnlineFrame;    /* Precalculated V110 idle frame        */
+	unsigned char *OfflineFrame;   /* Precalculated V110 sync Frame        */
+	int framelen;                  /* Length of frames                     */
+	int skbuser;                   /* Number of unacked userdata skbs      */
+	int skbidle;                   /* Number of unacked idle/sync skbs     */
+	int introducer;                /* Local vars for decoder               */
+	int dbit;
+	unsigned char b;
+	int skbres;                    /* space to reserve in outgoing skb     */
+	int maxsize;                   /* maxbufsize of lowlevel driver        */
+	unsigned char *encodebuf;      /* temporary buffer for encoding        */
+	unsigned char decodebuf[V110_BUFSIZE]; /* incomplete V110 matrices     */
+} isdn_v110_stream;
+
+/*========================= End of V.110 stuff =============================*/
+
+/*======================= Start of general stuff ===========================*/
+
+typedef struct {
+	char *next;
+	char *private;
+} infostruct;
+
+#define DRV_FLAG_RUNNING 1
+#define DRV_FLAG_REJBUS  2
+#define DRV_FLAG_LOADED  4
+
+/* Description of hardware-level-driver */
+typedef struct _isdn_driver {
+	ulong               online;           /* Channel-Online flags             */
+	ulong               flags;            /* Misc driver Flags                */
+	int                 locks;            /* Number of locks for this driver  */
+	int                 channels;         /* Number of channels               */
+	wait_queue_head_t   st_waitq;         /* Wait-Queue for status-read's     */
+	int                 maxbufsize;       /* Maximum Buffersize supported     */
+	unsigned long       pktcount;         /* Until now: unused                */
+	int                 stavail;          /* Chars avail on Status-device     */
+	isdn_if            *interface;        /* Interface to driver              */
+	int                *rcverr;           /* Error-counters for B-Ch.-receive */
+	int                *rcvcount;         /* Byte-counters for B-Ch.-receive  */
+#ifdef CONFIG_ISDN_AUDIO
+	unsigned long      DLEflag;           /* Flags: Insert DLE at next read   */
+#endif
+	struct sk_buff_head *rpqueue;         /* Pointers to start of Rcv-Queue   */
+	wait_queue_head_t  *rcv_waitq;       /* Wait-Queues for B-Channel-Reads  */
+	wait_queue_head_t  *snd_waitq;       /* Wait-Queue for B-Channel-Send's  */
+	char               msn2eaz[10][ISDN_MSNLEN];  /* Mapping-Table MSN->EAZ   */
+} isdn_driver_t;
+
+/* Main driver-data */
+typedef struct isdn_devt {
+	struct module     *owner;
+	spinlock_t	  lock;
+	unsigned short    flags;		      /* Bitmapped Flags:           */
+	int               drivers;		      /* Current number of drivers  */
+	int               channels;		      /* Current number of channels */
+	int               net_verbose;                /* Verbose-Flag               */
+	int               modempoll;		      /* Flag: tty-read active      */
+	spinlock_t	  timerlock;
+	int               tflags;                     /* Timer-Flags:               */
+	/*  see ISDN_TIMER_..defines  */
+	int               global_flags;
+	infostruct        *infochain;                 /* List of open info-devs.    */
+	wait_queue_head_t info_waitq;                 /* Wait-Queue for isdninfo    */
+	struct timer_list timer;		      /* Misc.-function Timer       */
+	int               chanmap[ISDN_MAX_CHANNELS]; /* Map minor->device-channel  */
+	int               drvmap[ISDN_MAX_CHANNELS];  /* Map minor->driver-index    */
+	int               usage[ISDN_MAX_CHANNELS];   /* Used by tty/ip/voice       */
+	char              num[ISDN_MAX_CHANNELS][ISDN_MSNLEN];
+	/* Remote number of active ch.*/
+	int               m_idx[ISDN_MAX_CHANNELS];   /* Index for mdm....          */
+	isdn_driver_t     *drv[ISDN_MAX_DRIVERS];     /* Array of drivers           */
+	isdn_net_dev      *netdev;		      /* Linked list of net-if's    */
+	char              drvid[ISDN_MAX_DRIVERS][20];/* Driver-ID                 */
+	struct task_struct *profd;                    /* For iprofd                 */
+	isdn_modem_t      mdm;			      /* tty-driver-data            */
+	isdn_net_dev      *rx_netdev[ISDN_MAX_CHANNELS]; /* rx netdev-pointers     */
+	isdn_net_dev      *st_netdev[ISDN_MAX_CHANNELS]; /* stat netdev-pointers   */
+	ulong             ibytes[ISDN_MAX_CHANNELS];  /* Statistics incoming bytes  */
+	ulong             obytes[ISDN_MAX_CHANNELS];  /* Statistics outgoing bytes  */
+	int               v110emu[ISDN_MAX_CHANNELS]; /* V.110 emulator-mode 0=none */
+	atomic_t          v110use[ISDN_MAX_CHANNELS]; /* Usage-Semaphore for stream */
+	isdn_v110_stream  *v110[ISDN_MAX_CHANNELS];   /* V.110 private data         */
+	struct mutex      mtx;                        /* serialize list access*/
+	unsigned long     global_features;
+} isdn_dev;
+
+extern isdn_dev *dev;
+
+
+#endif /* __KERNEL__ */
+
+#endif /* __ISDN_H__ */
diff --git a/include/linux/isdn/Kbuild b/include/linux/isdn/Kbuild
new file mode 100644
index 00000000..991cdb29
--- /dev/null
+++ b/include/linux/isdn/Kbuild
@@ -0,0 +1 @@
+header-y += capicmd.h
diff --git a/include/linux/isdn/capicmd.h b/include/linux/isdn/capicmd.h
new file mode 100644
index 00000000..b58635f7
--- /dev/null
+++ b/include/linux/isdn/capicmd.h
@@ -0,0 +1,115 @@
+/* $Id: capicmd.h,v 1.2.6.2 2001/09/23 22:24:33 kai Exp $
+ * 
+ * CAPI 2.0 Interface for Linux
+ * 
+ * Copyright 1997 by Carsten Paeth <calle@calle.de>
+ * 
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef __CAPICMD_H__
+#define __CAPICMD_H__
+
+#define CAPI_MSG_BASELEN		8
+#define CAPI_DATA_B3_REQ_LEN		(CAPI_MSG_BASELEN+4+4+2+2+2)
+#define CAPI_DATA_B3_RESP_LEN		(CAPI_MSG_BASELEN+4+2)
+
+/*----- CAPI commands -----*/
+#define CAPI_ALERT		    0x01
+#define CAPI_CONNECT		    0x02
+#define CAPI_CONNECT_ACTIVE	    0x03
+#define CAPI_CONNECT_B3_ACTIVE	    0x83
+#define CAPI_CONNECT_B3 	    0x82
+#define CAPI_CONNECT_B3_T90_ACTIVE  0x88
+#define CAPI_DATA_B3		    0x86
+#define CAPI_DISCONNECT_B3	    0x84
+#define CAPI_DISCONNECT 	    0x04
+#define CAPI_FACILITY		    0x80
+#define CAPI_INFO		    0x08
+#define CAPI_LISTEN		    0x05
+#define CAPI_MANUFACTURER	    0xff
+#define CAPI_RESET_B3		    0x87
+#define CAPI_SELECT_B_PROTOCOL	    0x41
+
+/*----- CAPI subcommands -----*/
+
+#define CAPI_REQ    0x80
+#define CAPI_CONF   0x81
+#define CAPI_IND    0x82
+#define CAPI_RESP   0x83
+
+/*----- CAPI combined commands -----*/
+
+#define CAPICMD(cmd,subcmd)	(((cmd)<<8)|(subcmd))
+
+#define CAPI_DISCONNECT_REQ		CAPICMD(CAPI_DISCONNECT,CAPI_REQ)
+#define CAPI_DISCONNECT_CONF		CAPICMD(CAPI_DISCONNECT,CAPI_CONF)
+#define CAPI_DISCONNECT_IND		CAPICMD(CAPI_DISCONNECT,CAPI_IND)
+#define CAPI_DISCONNECT_RESP		CAPICMD(CAPI_DISCONNECT,CAPI_RESP)
+
+#define CAPI_ALERT_REQ			CAPICMD(CAPI_ALERT,CAPI_REQ)
+#define CAPI_ALERT_CONF			CAPICMD(CAPI_ALERT,CAPI_CONF)
+
+#define CAPI_CONNECT_REQ		CAPICMD(CAPI_CONNECT,CAPI_REQ)
+#define CAPI_CONNECT_CONF		CAPICMD(CAPI_CONNECT,CAPI_CONF)
+#define CAPI_CONNECT_IND		CAPICMD(CAPI_CONNECT,CAPI_IND)
+#define CAPI_CONNECT_RESP		CAPICMD(CAPI_CONNECT,CAPI_RESP)
+
+#define CAPI_CONNECT_ACTIVE_REQ		CAPICMD(CAPI_CONNECT_ACTIVE,CAPI_REQ)
+#define CAPI_CONNECT_ACTIVE_CONF	CAPICMD(CAPI_CONNECT_ACTIVE,CAPI_CONF)
+#define CAPI_CONNECT_ACTIVE_IND		CAPICMD(CAPI_CONNECT_ACTIVE,CAPI_IND)
+#define CAPI_CONNECT_ACTIVE_RESP	CAPICMD(CAPI_CONNECT_ACTIVE,CAPI_RESP)
+
+#define CAPI_SELECT_B_PROTOCOL_REQ	CAPICMD(CAPI_SELECT_B_PROTOCOL,CAPI_REQ)
+#define CAPI_SELECT_B_PROTOCOL_CONF	CAPICMD(CAPI_SELECT_B_PROTOCOL,CAPI_CONF)
+
+#define CAPI_CONNECT_B3_ACTIVE_REQ	CAPICMD(CAPI_CONNECT_B3_ACTIVE,CAPI_REQ)
+#define CAPI_CONNECT_B3_ACTIVE_CONF	CAPICMD(CAPI_CONNECT_B3_ACTIVE,CAPI_CONF)
+#define CAPI_CONNECT_B3_ACTIVE_IND	CAPICMD(CAPI_CONNECT_B3_ACTIVE,CAPI_IND)
+#define CAPI_CONNECT_B3_ACTIVE_RESP	CAPICMD(CAPI_CONNECT_B3_ACTIVE,CAPI_RESP)
+
+#define CAPI_CONNECT_B3_REQ		CAPICMD(CAPI_CONNECT_B3,CAPI_REQ)
+#define CAPI_CONNECT_B3_CONF		CAPICMD(CAPI_CONNECT_B3,CAPI_CONF)
+#define CAPI_CONNECT_B3_IND		CAPICMD(CAPI_CONNECT_B3,CAPI_IND)
+#define CAPI_CONNECT_B3_RESP		CAPICMD(CAPI_CONNECT_B3,CAPI_RESP)
+
+
+#define CAPI_CONNECT_B3_T90_ACTIVE_IND	CAPICMD(CAPI_CONNECT_B3_T90_ACTIVE,CAPI_IND)
+#define CAPI_CONNECT_B3_T90_ACTIVE_RESP	CAPICMD(CAPI_CONNECT_B3_T90_ACTIVE,CAPI_RESP)
+
+#define CAPI_DATA_B3_REQ		CAPICMD(CAPI_DATA_B3,CAPI_REQ)
+#define CAPI_DATA_B3_CONF		CAPICMD(CAPI_DATA_B3,CAPI_CONF)
+#define CAPI_DATA_B3_IND		CAPICMD(CAPI_DATA_B3,CAPI_IND)
+#define CAPI_DATA_B3_RESP		CAPICMD(CAPI_DATA_B3,CAPI_RESP)
+
+#define CAPI_DISCONNECT_B3_REQ		CAPICMD(CAPI_DISCONNECT_B3,CAPI_REQ)
+#define CAPI_DISCONNECT_B3_CONF		CAPICMD(CAPI_DISCONNECT_B3,CAPI_CONF)
+#define CAPI_DISCONNECT_B3_IND		CAPICMD(CAPI_DISCONNECT_B3,CAPI_IND)
+#define CAPI_DISCONNECT_B3_RESP		CAPICMD(CAPI_DISCONNECT_B3,CAPI_RESP)
+
+#define CAPI_RESET_B3_REQ		CAPICMD(CAPI_RESET_B3,CAPI_REQ)
+#define CAPI_RESET_B3_CONF		CAPICMD(CAPI_RESET_B3,CAPI_CONF)
+#define CAPI_RESET_B3_IND		CAPICMD(CAPI_RESET_B3,CAPI_IND)
+#define CAPI_RESET_B3_RESP		CAPICMD(CAPI_RESET_B3,CAPI_RESP)
+
+#define CAPI_LISTEN_REQ			CAPICMD(CAPI_LISTEN,CAPI_REQ)
+#define CAPI_LISTEN_CONF		CAPICMD(CAPI_LISTEN,CAPI_CONF)
+
+#define CAPI_MANUFACTURER_REQ		CAPICMD(CAPI_MANUFACTURER,CAPI_REQ)
+#define CAPI_MANUFACTURER_CONF		CAPICMD(CAPI_MANUFACTURER,CAPI_CONF)
+#define CAPI_MANUFACTURER_IND		CAPICMD(CAPI_MANUFACTURER,CAPI_IND)
+#define CAPI_MANUFACTURER_RESP		CAPICMD(CAPI_MANUFACTURER,CAPI_RESP)
+
+#define CAPI_FACILITY_REQ		CAPICMD(CAPI_FACILITY,CAPI_REQ)
+#define CAPI_FACILITY_CONF		CAPICMD(CAPI_FACILITY,CAPI_CONF)
+#define CAPI_FACILITY_IND		CAPICMD(CAPI_FACILITY,CAPI_IND)
+#define CAPI_FACILITY_RESP		CAPICMD(CAPI_FACILITY,CAPI_RESP)
+
+#define CAPI_INFO_REQ			CAPICMD(CAPI_INFO,CAPI_REQ)
+#define CAPI_INFO_CONF			CAPICMD(CAPI_INFO,CAPI_CONF)
+#define CAPI_INFO_IND			CAPICMD(CAPI_INFO,CAPI_IND)
+#define CAPI_INFO_RESP			CAPICMD(CAPI_INFO,CAPI_RESP)
+
+#endif				/* __CAPICMD_H__ */
diff --git a/include/linux/isdn/capilli.h b/include/linux/isdn/capilli.h
new file mode 100644
index 00000000..11b57c48
--- /dev/null
+++ b/include/linux/isdn/capilli.h
@@ -0,0 +1,113 @@
+/* $Id: capilli.h,v 1.1.2.2 2004/01/16 21:09:27 keil Exp $
+ * 
+ * Kernel CAPI 2.0 Driver Interface for Linux
+ * 
+ * Copyright 1999 by Carsten Paeth <calle@calle.de>
+ * 
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef __CAPILLI_H__
+#define __CAPILLI_H__
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/capi.h>
+#include <linux/kernelcapi.h>
+
+typedef struct capiloaddatapart {
+	int user;		/* data in userspace ? */
+	int len;
+	unsigned char *data;
+} capiloaddatapart;
+
+typedef struct capiloaddata {
+	capiloaddatapart firmware;
+	capiloaddatapart configuration;
+} capiloaddata;
+
+typedef struct capicardparams {
+	unsigned int port;
+	unsigned irq;
+	int cardtype;
+	int cardnr;
+	unsigned int membase;
+} capicardparams;
+
+struct capi_ctr {
+	/* filled in before calling attach_capi_ctr */
+	struct module *owner;
+	void *driverdata;			/* driver specific */
+	char name[32];				/* name of controller */
+	char *driver_name;			/* name of driver */
+	int (*load_firmware)(struct capi_ctr *, capiloaddata *);
+	void (*reset_ctr)(struct capi_ctr *);
+	void (*register_appl)(struct capi_ctr *, u16 appl,
+			      capi_register_params *);
+	void (*release_appl)(struct capi_ctr *, u16 appl);
+	u16  (*send_message)(struct capi_ctr *, struct sk_buff *skb);
+	
+	char *(*procinfo)(struct capi_ctr *);
+	const struct file_operations *proc_fops;
+
+	/* filled in before calling ready callback */
+	u8 manu[CAPI_MANUFACTURER_LEN];		/* CAPI_GET_MANUFACTURER */
+	capi_version version;			/* CAPI_GET_VERSION */
+	capi_profile profile;			/* CAPI_GET_PROFILE */
+	u8 serial[CAPI_SERIAL_LEN];		/* CAPI_GET_SERIAL */
+
+	/* management information for kcapi */
+
+	unsigned long nrecvctlpkt;
+	unsigned long nrecvdatapkt;
+	unsigned long nsentctlpkt;
+	unsigned long nsentdatapkt;
+
+	int cnr;				/* controller number */
+	unsigned short state;			/* controller state */
+	int blocked;				/* output blocked */
+	int traceflag;				/* capi trace */
+	wait_queue_head_t state_wait_queue;
+
+	struct proc_dir_entry *procent;
+        char procfn[128];
+};
+
+int attach_capi_ctr(struct capi_ctr *);
+int detach_capi_ctr(struct capi_ctr *);
+
+void capi_ctr_ready(struct capi_ctr * card);
+void capi_ctr_down(struct capi_ctr * card);
+void capi_ctr_suspend_output(struct capi_ctr * card);
+void capi_ctr_resume_output(struct capi_ctr * card);
+void capi_ctr_handle_message(struct capi_ctr * card, u16 appl, struct sk_buff *skb);
+
+// ---------------------------------------------------------------------------
+// needed for AVM capi drivers
+
+struct capi_driver {
+	char name[32];				/* driver name */
+	char revision[32];
+
+	int (*add_card)(struct capi_driver *driver, capicardparams *data);
+
+	/* management information for kcapi */
+	struct list_head list; 
+};
+
+void register_capi_driver(struct capi_driver *driver);
+void unregister_capi_driver(struct capi_driver *driver);
+
+// ---------------------------------------------------------------------------
+// library functions for use by hardware controller drivers
+
+void capilib_new_ncci(struct list_head *head, u16 applid, u32 ncci, u32 winsize);
+void capilib_free_ncci(struct list_head *head, u16 applid, u32 ncci);
+void capilib_release_appl(struct list_head *head, u16 applid);
+void capilib_release(struct list_head *head);
+void capilib_data_b3_conf(struct list_head *head, u16 applid, u32 ncci, u16 msgid);
+u16  capilib_data_b3_req(struct list_head *head, u16 applid, u32 ncci, u16 msgid);
+
+#endif				/* __CAPILLI_H__ */
diff --git a/include/linux/isdn/capiutil.h b/include/linux/isdn/capiutil.h
new file mode 100644
index 00000000..5a52f2c9
--- /dev/null
+++ b/include/linux/isdn/capiutil.h
@@ -0,0 +1,521 @@
+/* $Id: capiutil.h,v 1.5.6.2 2001/09/23 22:24:33 kai Exp $
+ *
+ * CAPI 2.0 defines & types
+ *
+ * From CAPI 2.0 Development Kit AVM 1995 (msg.c)
+ * Rewritten for Linux 1996 by Carsten Paeth <calle@calle.de>
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef __CAPIUTIL_H__
+#define __CAPIUTIL_H__
+
+#include <asm/types.h>
+
+#define CAPIMSG_BASELEN		8
+#define CAPIMSG_U8(m, off)	(m[off])
+#define CAPIMSG_U16(m, off)	(m[off]|(m[(off)+1]<<8))
+#define CAPIMSG_U32(m, off)	(m[off]|(m[(off)+1]<<8)|(m[(off)+2]<<16)|(m[(off)+3]<<24))
+#define	CAPIMSG_LEN(m)		CAPIMSG_U16(m,0)
+#define	CAPIMSG_APPID(m)	CAPIMSG_U16(m,2)
+#define	CAPIMSG_COMMAND(m)	CAPIMSG_U8(m,4)
+#define	CAPIMSG_SUBCOMMAND(m)	CAPIMSG_U8(m,5)
+#define CAPIMSG_CMD(m)		(((m[4])<<8)|(m[5]))
+#define	CAPIMSG_MSGID(m)	CAPIMSG_U16(m,6)
+#define CAPIMSG_CONTROLLER(m)	(m[8] & 0x7f)
+#define CAPIMSG_CONTROL(m)	CAPIMSG_U32(m, 8)
+#define CAPIMSG_NCCI(m)		CAPIMSG_CONTROL(m)
+#define CAPIMSG_DATALEN(m)	CAPIMSG_U16(m,16) /* DATA_B3_REQ */
+
+static inline void capimsg_setu8(void *m, int off, __u8 val)
+{
+	((__u8 *)m)[off] = val;
+}
+
+static inline void capimsg_setu16(void *m, int off, __u16 val)
+{
+	((__u8 *)m)[off] = val & 0xff;
+	((__u8 *)m)[off+1] = (val >> 8) & 0xff;
+}
+
+static inline void capimsg_setu32(void *m, int off, __u32 val)
+{
+	((__u8 *)m)[off] = val & 0xff;
+	((__u8 *)m)[off+1] = (val >> 8) & 0xff;
+	((__u8 *)m)[off+2] = (val >> 16) & 0xff;
+	((__u8 *)m)[off+3] = (val >> 24) & 0xff;
+}
+
+#define	CAPIMSG_SETLEN(m, len)		capimsg_setu16(m, 0, len)
+#define	CAPIMSG_SETAPPID(m, applid)	capimsg_setu16(m, 2, applid)
+#define	CAPIMSG_SETCOMMAND(m,cmd)	capimsg_setu8(m, 4, cmd)
+#define	CAPIMSG_SETSUBCOMMAND(m, cmd)	capimsg_setu8(m, 5, cmd)
+#define	CAPIMSG_SETMSGID(m, msgid)	capimsg_setu16(m, 6, msgid)
+#define	CAPIMSG_SETCONTROL(m, contr)	capimsg_setu32(m, 8, contr)
+#define	CAPIMSG_SETDATALEN(m, len)	capimsg_setu16(m, 16, len)
+
+/*----- basic-type definitions -----*/
+
+typedef __u8 *_cstruct;
+
+typedef enum {
+	CAPI_COMPOSE,
+	CAPI_DEFAULT
+} _cmstruct;
+
+/*
+   The _cmsg structure contains all possible CAPI 2.0 parameter.
+   All parameters are stored here first. The function CAPI_CMSG_2_MESSAGE
+   assembles the parameter and builds CAPI2.0 conform messages.
+   CAPI_MESSAGE_2_CMSG disassembles CAPI 2.0 messages and stores the
+   parameter in the _cmsg structure
+ */
+
+typedef struct {
+	/* Header */
+	__u16 ApplId;
+	__u8 Command;
+	__u8 Subcommand;
+	__u16 Messagenumber;
+
+	/* Parameter */
+	union {
+		__u32 adrController;
+		__u32 adrPLCI;
+		__u32 adrNCCI;
+	} adr;
+
+	_cmstruct AdditionalInfo;
+	_cstruct B1configuration;
+	__u16 B1protocol;
+	_cstruct B2configuration;
+	__u16 B2protocol;
+	_cstruct B3configuration;
+	__u16 B3protocol;
+	_cstruct BC;
+	_cstruct BChannelinformation;
+	_cmstruct BProtocol;
+	_cstruct CalledPartyNumber;
+	_cstruct CalledPartySubaddress;
+	_cstruct CallingPartyNumber;
+	_cstruct CallingPartySubaddress;
+	__u32 CIPmask;
+	__u32 CIPmask2;
+	__u16 CIPValue;
+	__u32 Class;
+	_cstruct ConnectedNumber;
+	_cstruct ConnectedSubaddress;
+	__u32 Data;
+	__u16 DataHandle;
+	__u16 DataLength;
+	_cstruct FacilityConfirmationParameter;
+	_cstruct Facilitydataarray;
+	_cstruct FacilityIndicationParameter;
+	_cstruct FacilityRequestParameter;
+	__u16 FacilitySelector;
+	__u16 Flags;
+	__u32 Function;
+	_cstruct HLC;
+	__u16 Info;
+	_cstruct InfoElement;
+	__u32 InfoMask;
+	__u16 InfoNumber;
+	_cstruct Keypadfacility;
+	_cstruct LLC;
+	_cstruct ManuData;
+	__u32 ManuID;
+	_cstruct NCPI;
+	__u16 Reason;
+	__u16 Reason_B3;
+	__u16 Reject;
+	_cstruct Useruserdata;
+
+	/* intern */
+	unsigned l, p;
+	unsigned char *par;
+	__u8 *m;
+
+	/* buffer to construct message */
+	__u8 buf[180];
+
+} _cmsg;
+
+/*
+ * capi_cmsg2message() assembles the parameter from _cmsg to a CAPI 2.0
+ * conform message
+ */
+unsigned capi_cmsg2message(_cmsg * cmsg, __u8 * msg);
+
+/*
+ *  capi_message2cmsg disassembles a CAPI message an writes the parameter
+ *  into _cmsg for easy access
+ */
+unsigned capi_message2cmsg(_cmsg * cmsg, __u8 * msg);
+
+/*
+ * capi_cmsg_header() fills the _cmsg structure with default values, so only
+ * parameter with non default values must be changed before sending the
+ * message.
+ */
+unsigned capi_cmsg_header(_cmsg * cmsg, __u16 _ApplId,
+			  __u8 _Command, __u8 _Subcommand,
+			  __u16 _Messagenumber, __u32 _Controller);
+
+/*
+ * capi_info2str generated a readable string for Capi2.0 reasons.
+ */
+char *capi_info2str(__u16 reason);
+
+/*-----------------------------------------------------------------------*/
+
+/*
+ * Debugging / Tracing functions
+ */
+
+char *capi_cmd2str(__u8 cmd, __u8 subcmd);
+
+typedef struct {
+	u_char	*buf;
+	u_char	*p;
+	size_t	size;
+	size_t	pos;
+} _cdebbuf;
+
+#define	CDEBUG_SIZE	1024
+#define	CDEBUG_GSIZE	4096
+
+void cdebbuf_free(_cdebbuf *cdb);
+int cdebug_init(void);
+void cdebug_exit(void);
+
+_cdebbuf *capi_cmsg2str(_cmsg *cmsg);
+_cdebbuf *capi_message2str(__u8 *msg);
+
+/*-----------------------------------------------------------------------*/
+
+static inline void capi_cmsg_answer(_cmsg * cmsg)
+{
+	cmsg->Subcommand |= 0x01;
+}
+
+/*-----------------------------------------------------------------------*/
+
+static inline void capi_fill_CONNECT_B3_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					    __u32 adr,
+					    _cstruct NCPI)
+{
+	capi_cmsg_header(cmsg, ApplId, 0x82, 0x80, Messagenumber, adr);
+	cmsg->NCPI = NCPI;
+}
+
+static inline void capi_fill_FACILITY_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					  __u32 adr,
+					  __u16 FacilitySelector,
+				       _cstruct FacilityRequestParameter)
+{
+	capi_cmsg_header(cmsg, ApplId, 0x80, 0x80, Messagenumber, adr);
+	cmsg->FacilitySelector = FacilitySelector;
+	cmsg->FacilityRequestParameter = FacilityRequestParameter;
+}
+
+static inline void capi_fill_INFO_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+				      __u32 adr,
+				      _cstruct CalledPartyNumber,
+				      _cstruct BChannelinformation,
+				      _cstruct Keypadfacility,
+				      _cstruct Useruserdata,
+				      _cstruct Facilitydataarray)
+{
+	capi_cmsg_header(cmsg, ApplId, 0x08, 0x80, Messagenumber, adr);
+	cmsg->CalledPartyNumber = CalledPartyNumber;
+	cmsg->BChannelinformation = BChannelinformation;
+	cmsg->Keypadfacility = Keypadfacility;
+	cmsg->Useruserdata = Useruserdata;
+	cmsg->Facilitydataarray = Facilitydataarray;
+}
+
+static inline void capi_fill_LISTEN_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					__u32 adr,
+					__u32 InfoMask,
+					__u32 CIPmask,
+					__u32 CIPmask2,
+					_cstruct CallingPartyNumber,
+					_cstruct CallingPartySubaddress)
+{
+	capi_cmsg_header(cmsg, ApplId, 0x05, 0x80, Messagenumber, adr);
+	cmsg->InfoMask = InfoMask;
+	cmsg->CIPmask = CIPmask;
+	cmsg->CIPmask2 = CIPmask2;
+	cmsg->CallingPartyNumber = CallingPartyNumber;
+	cmsg->CallingPartySubaddress = CallingPartySubaddress;
+}
+
+static inline void capi_fill_ALERT_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+				       __u32 adr,
+				       _cstruct BChannelinformation,
+				       _cstruct Keypadfacility,
+				       _cstruct Useruserdata,
+				       _cstruct Facilitydataarray)
+{
+	capi_cmsg_header(cmsg, ApplId, 0x01, 0x80, Messagenumber, adr);
+	cmsg->BChannelinformation = BChannelinformation;
+	cmsg->Keypadfacility = Keypadfacility;
+	cmsg->Useruserdata = Useruserdata;
+	cmsg->Facilitydataarray = Facilitydataarray;
+}
+
+static inline void capi_fill_CONNECT_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					 __u32 adr,
+					 __u16 CIPValue,
+					 _cstruct CalledPartyNumber,
+					 _cstruct CallingPartyNumber,
+					 _cstruct CalledPartySubaddress,
+					 _cstruct CallingPartySubaddress,
+					 __u16 B1protocol,
+					 __u16 B2protocol,
+					 __u16 B3protocol,
+					 _cstruct B1configuration,
+					 _cstruct B2configuration,
+					 _cstruct B3configuration,
+					 _cstruct BC,
+					 _cstruct LLC,
+					 _cstruct HLC,
+					 _cstruct BChannelinformation,
+					 _cstruct Keypadfacility,
+					 _cstruct Useruserdata,
+					 _cstruct Facilitydataarray)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x02, 0x80, Messagenumber, adr);
+	cmsg->CIPValue = CIPValue;
+	cmsg->CalledPartyNumber = CalledPartyNumber;
+	cmsg->CallingPartyNumber = CallingPartyNumber;
+	cmsg->CalledPartySubaddress = CalledPartySubaddress;
+	cmsg->CallingPartySubaddress = CallingPartySubaddress;
+	cmsg->B1protocol = B1protocol;
+	cmsg->B2protocol = B2protocol;
+	cmsg->B3protocol = B3protocol;
+	cmsg->B1configuration = B1configuration;
+	cmsg->B2configuration = B2configuration;
+	cmsg->B3configuration = B3configuration;
+	cmsg->BC = BC;
+	cmsg->LLC = LLC;
+	cmsg->HLC = HLC;
+	cmsg->BChannelinformation = BChannelinformation;
+	cmsg->Keypadfacility = Keypadfacility;
+	cmsg->Useruserdata = Useruserdata;
+	cmsg->Facilitydataarray = Facilitydataarray;
+}
+
+static inline void capi_fill_DATA_B3_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					 __u32 adr,
+					 __u32 Data,
+					 __u16 DataLength,
+					 __u16 DataHandle,
+					 __u16 Flags)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x86, 0x80, Messagenumber, adr);
+	cmsg->Data = Data;
+	cmsg->DataLength = DataLength;
+	cmsg->DataHandle = DataHandle;
+	cmsg->Flags = Flags;
+}
+
+static inline void capi_fill_DISCONNECT_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					    __u32 adr,
+					    _cstruct BChannelinformation,
+					    _cstruct Keypadfacility,
+					    _cstruct Useruserdata,
+					    _cstruct Facilitydataarray)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x04, 0x80, Messagenumber, adr);
+	cmsg->BChannelinformation = BChannelinformation;
+	cmsg->Keypadfacility = Keypadfacility;
+	cmsg->Useruserdata = Useruserdata;
+	cmsg->Facilitydataarray = Facilitydataarray;
+}
+
+static inline void capi_fill_DISCONNECT_B3_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					       __u32 adr,
+					       _cstruct NCPI)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x84, 0x80, Messagenumber, adr);
+	cmsg->NCPI = NCPI;
+}
+
+static inline void capi_fill_MANUFACTURER_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					      __u32 adr,
+					      __u32 ManuID,
+					      __u32 Class,
+					      __u32 Function,
+					      _cstruct ManuData)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0xff, 0x80, Messagenumber, adr);
+	cmsg->ManuID = ManuID;
+	cmsg->Class = Class;
+	cmsg->Function = Function;
+	cmsg->ManuData = ManuData;
+}
+
+static inline void capi_fill_RESET_B3_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					  __u32 adr,
+					  _cstruct NCPI)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x87, 0x80, Messagenumber, adr);
+	cmsg->NCPI = NCPI;
+}
+
+static inline void capi_fill_SELECT_B_PROTOCOL_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+						   __u32 adr,
+						   __u16 B1protocol,
+						   __u16 B2protocol,
+						   __u16 B3protocol,
+						_cstruct B1configuration,
+						_cstruct B2configuration,
+						_cstruct B3configuration)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x41, 0x80, Messagenumber, adr);
+	cmsg->B1protocol = B1protocol;
+	cmsg->B2protocol = B2protocol;
+	cmsg->B3protocol = B3protocol;
+	cmsg->B1configuration = B1configuration;
+	cmsg->B2configuration = B2configuration;
+	cmsg->B3configuration = B3configuration;
+}
+
+static inline void capi_fill_CONNECT_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					  __u32 adr,
+					  __u16 Reject,
+					  __u16 B1protocol,
+					  __u16 B2protocol,
+					  __u16 B3protocol,
+					  _cstruct B1configuration,
+					  _cstruct B2configuration,
+					  _cstruct B3configuration,
+					  _cstruct ConnectedNumber,
+					  _cstruct ConnectedSubaddress,
+					  _cstruct LLC,
+					  _cstruct BChannelinformation,
+					  _cstruct Keypadfacility,
+					  _cstruct Useruserdata,
+					  _cstruct Facilitydataarray)
+{
+	capi_cmsg_header(cmsg, ApplId, 0x02, 0x83, Messagenumber, adr);
+	cmsg->Reject = Reject;
+	cmsg->B1protocol = B1protocol;
+	cmsg->B2protocol = B2protocol;
+	cmsg->B3protocol = B3protocol;
+	cmsg->B1configuration = B1configuration;
+	cmsg->B2configuration = B2configuration;
+	cmsg->B3configuration = B3configuration;
+	cmsg->ConnectedNumber = ConnectedNumber;
+	cmsg->ConnectedSubaddress = ConnectedSubaddress;
+	cmsg->LLC = LLC;
+	cmsg->BChannelinformation = BChannelinformation;
+	cmsg->Keypadfacility = Keypadfacility;
+	cmsg->Useruserdata = Useruserdata;
+	cmsg->Facilitydataarray = Facilitydataarray;
+}
+
+static inline void capi_fill_CONNECT_ACTIVE_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+						 __u32 adr)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x03, 0x83, Messagenumber, adr);
+}
+
+static inline void capi_fill_CONNECT_B3_ACTIVE_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+						    __u32 adr)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x83, 0x83, Messagenumber, adr);
+}
+
+static inline void capi_fill_CONNECT_B3_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					     __u32 adr,
+					     __u16 Reject,
+					     _cstruct NCPI)
+{
+	capi_cmsg_header(cmsg, ApplId, 0x82, 0x83, Messagenumber, adr);
+	cmsg->Reject = Reject;
+	cmsg->NCPI = NCPI;
+}
+
+static inline void capi_fill_CONNECT_B3_T90_ACTIVE_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+							__u32 adr)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x88, 0x83, Messagenumber, adr);
+}
+
+static inline void capi_fill_DATA_B3_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					  __u32 adr,
+					  __u16 DataHandle)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x86, 0x83, Messagenumber, adr);
+	cmsg->DataHandle = DataHandle;
+}
+
+static inline void capi_fill_DISCONNECT_B3_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+						__u32 adr)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x84, 0x83, Messagenumber, adr);
+}
+
+static inline void capi_fill_DISCONNECT_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					     __u32 adr)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x04, 0x83, Messagenumber, adr);
+}
+
+static inline void capi_fill_FACILITY_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					   __u32 adr,
+					   __u16 FacilitySelector)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x80, 0x83, Messagenumber, adr);
+	cmsg->FacilitySelector = FacilitySelector;
+}
+
+static inline void capi_fill_INFO_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+				       __u32 adr)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x08, 0x83, Messagenumber, adr);
+}
+
+static inline void capi_fill_MANUFACTURER_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					       __u32 adr,
+					       __u32 ManuID,
+					       __u32 Class,
+					       __u32 Function,
+					       _cstruct ManuData)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0xff, 0x83, Messagenumber, adr);
+	cmsg->ManuID = ManuID;
+	cmsg->Class = Class;
+	cmsg->Function = Function;
+	cmsg->ManuData = ManuData;
+}
+
+static inline void capi_fill_RESET_B3_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
+					   __u32 adr)
+{
+
+	capi_cmsg_header(cmsg, ApplId, 0x87, 0x83, Messagenumber, adr);
+}
+
+#endif				/* __CAPIUTIL_H__ */
diff --git a/include/linux/isdn/hdlc.h b/include/linux/isdn/hdlc.h
new file mode 100644
index 00000000..96521370
--- /dev/null
+++ b/include/linux/isdn/hdlc.h
@@ -0,0 +1,82 @@
+/*
+ * hdlc.h  --  General purpose ISDN HDLC decoder.
+ *
+ * Implementation of a HDLC decoder/encoder in software.
+ * Necessary because some ISDN devices don't have HDLC
+ * controllers.
+ *
+ * Copyright (C)
+ *	2009	Karsten Keil		<keil@b1-systems.de>
+ *	2002	Wolfgang Mües		<wolfgang@iksw-muees.de>
+ *	2001	Frode Isaksen		<fisaksen@bewan.com>
+ *	2001	Kai Germaschewski	<kai.germaschewski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ISDNHDLC_H__
+#define __ISDNHDLC_H__
+
+struct isdnhdlc_vars {
+	int bit_shift;
+	int hdlc_bits1;
+	int data_bits;
+	int ffbit_shift;	/* encoding only */
+	int state;
+	int dstpos;
+
+	u16 crc;
+
+	u8 cbin;
+	u8 shift_reg;
+	u8 ffvalue;
+
+	/* set if transferring data */
+	u32 data_received:1;
+	/* set if D channel (send idle instead of flags) */
+	u32 dchannel:1;
+	/* set if 56K adaptation */
+	u32 do_adapt56:1;
+	/* set if in closing phase (need to send CRC + flag) */
+	u32 do_closing:1;
+	/* set if data is bitreverse */
+	u32 do_bitreverse:1;
+};
+
+/* Feature Flags */
+#define HDLC_56KBIT	0x01
+#define HDLC_DCHANNEL	0x02
+#define HDLC_BITREVERSE	0x04
+
+/*
+  The return value from isdnhdlc_decode is
+  the frame length, 0 if no complete frame was decoded,
+  or a negative error number
+*/
+#define HDLC_FRAMING_ERROR     1
+#define HDLC_CRC_ERROR         2
+#define HDLC_LENGTH_ERROR      3
+
+extern void	isdnhdlc_rcv_init(struct isdnhdlc_vars *hdlc, u32 features);
+
+extern int	isdnhdlc_decode(struct isdnhdlc_vars *hdlc, const u8 *src,
+			int slen, int *count, u8 *dst, int dsize);
+
+extern void	isdnhdlc_out_init(struct isdnhdlc_vars *hdlc, u32 features);
+
+extern int	isdnhdlc_encode(struct isdnhdlc_vars *hdlc, const u8 *src,
+			u16 slen, int *count, u8 *dst, int dsize);
+
+#endif /* __ISDNHDLC_H__ */
diff --git a/include/linux/isdn_divertif.h b/include/linux/isdn_divertif.h
new file mode 100644
index 00000000..a5a50f52
--- /dev/null
+++ b/include/linux/isdn_divertif.h
@@ -0,0 +1,51 @@
+/* $Id: isdn_divertif.h,v 1.4.6.1 2001/09/23 22:25:05 kai Exp $
+ *
+ * Header for the diversion supplementary interface for i4l.
+ *
+ * Author    Werner Cornelius (werner@titro.de)
+ * Copyright by Werner Cornelius (werner@titro.de)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef _LINUX_ISDN_DIVERTIF_H
+#define _LINUX_ISDN_DIVERTIF_H
+
+/***********************************************************/
+/* magic value is also used to control version information */
+/***********************************************************/
+#define DIVERT_IF_MAGIC 0x25873401
+#define DIVERT_CMD_REG  0x00  /* register command */
+#define DIVERT_CMD_REL  0x01  /* release command */
+#define DIVERT_NO_ERR   0x00  /* return value no error */
+#define DIVERT_CMD_ERR  0x01  /* invalid cmd */
+#define DIVERT_VER_ERR  0x02  /* magic/version invalid */
+#define DIVERT_REG_ERR  0x03  /* module already registered */
+#define DIVERT_REL_ERR  0x04  /* module not registered */
+#define DIVERT_REG_NAME isdn_register_divert
+
+#ifdef __KERNEL__
+#include <linux/isdnif.h>
+#include <linux/types.h>
+
+/***************************************************************/
+/* structure exchanging data between isdn hl and divert module */
+/***************************************************************/ 
+typedef struct
+  { ulong if_magic; /* magic info and version */
+    int cmd; /* command */
+    int (*stat_callback)(isdn_ctrl *); /* supplied by divert module when calling */
+    int (*ll_cmd)(isdn_ctrl *); /* supplied by hl on return */
+    char * (*drv_to_name)(int); /* map a driver id to name, supplied by hl */
+    int (*name_to_drv)(char *); /* map a driver id to name, supplied by hl */
+  } isdn_divert_if;
+
+/*********************/
+/* function register */
+/*********************/
+extern int DIVERT_REG_NAME(isdn_divert_if *);
+#endif
+
+#endif /* _LINUX_ISDN_DIVERTIF_H */
diff --git a/include/linux/isdn_ppp.h b/include/linux/isdn_ppp.h
new file mode 100644
index 00000000..8687a7dc
--- /dev/null
+++ b/include/linux/isdn_ppp.h
@@ -0,0 +1,248 @@
+/* Linux ISDN subsystem, sync PPP, interface to ipppd
+ *
+ * Copyright 1994-1999  by Fritz Elfert (fritz@isdn4linux.de)
+ * Copyright 1995,96    Thinking Objects Software GmbH Wuerzburg
+ * Copyright 1995,96    by Michael Hipp (Michael.Hipp@student.uni-tuebingen.de)
+ * Copyright 2000-2002  by Kai Germaschewski (kai@germaschewski.name)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef _LINUX_ISDN_PPP_H
+#define _LINUX_ISDN_PPP_H
+
+#define CALLTYPE_INCOMING 0x1
+#define CALLTYPE_OUTGOING 0x2
+#define CALLTYPE_CALLBACK 0x4
+
+#define IPPP_VERSION    "2.2.0"
+
+struct pppcallinfo
+{
+  int calltype;
+  unsigned char local_num[64];
+  unsigned char remote_num[64];
+  int charge_units;
+};
+
+#define PPPIOCGCALLINFO _IOWR('t',128,struct pppcallinfo)
+#define PPPIOCBUNDLE   _IOW('t',129,int)
+#define PPPIOCGMPFLAGS _IOR('t',130,int)
+#define PPPIOCSMPFLAGS _IOW('t',131,int)
+#define PPPIOCSMPMTU   _IOW('t',132,int)
+#define PPPIOCSMPMRU   _IOW('t',133,int)
+#define PPPIOCGCOMPRESSORS _IOR('t',134,unsigned long [8])
+#define PPPIOCSCOMPRESSOR _IOW('t',135,int)
+#define PPPIOCGIFNAME      _IOR('t',136, char [IFNAMSIZ] )
+
+
+#define SC_MP_PROT       0x00000200
+#define SC_REJ_MP_PROT   0x00000400
+#define SC_OUT_SHORT_SEQ 0x00000800
+#define SC_IN_SHORT_SEQ  0x00004000
+
+#define SC_DECOMP_ON		0x01
+#define SC_COMP_ON		0x02
+#define SC_DECOMP_DISCARD	0x04
+#define SC_COMP_DISCARD		0x08
+#define SC_LINK_DECOMP_ON	0x10
+#define SC_LINK_COMP_ON		0x20
+#define SC_LINK_DECOMP_DISCARD	0x40
+#define SC_LINK_COMP_DISCARD	0x80
+
+#define ISDN_PPP_COMP_MAX_OPTIONS 16
+
+#define IPPP_COMP_FLAG_XMIT 0x1
+#define IPPP_COMP_FLAG_LINK 0x2
+
+struct isdn_ppp_comp_data {
+  int num;
+  unsigned char options[ISDN_PPP_COMP_MAX_OPTIONS];
+  int optlen;
+  int flags;
+};
+
+#ifdef __KERNEL__
+
+
+
+#ifdef CONFIG_IPPP_FILTER
+#include <linux/filter.h>
+#endif
+
+#define DECOMP_ERR_NOMEM	(-10)
+
+#define MP_END_FRAG    0x40
+#define MP_BEGIN_FRAG  0x80
+
+#define MP_MAX_QUEUE_LEN	16
+
+/*
+ * We need a way for the decompressor to influence the generation of CCP
+ * Reset-Requests in a variety of ways. The decompressor is already returning
+ * a lot of information (generated skb length, error conditions) so we use
+ * another parameter. This parameter is a pointer to a structure which is
+ * to be marked valid by the decompressor and only in this case is ever used.
+ * Furthermore, the only case where this data is used is when the decom-
+ * pressor returns DECOMP_ERROR.
+ *
+ * We use this same struct for the reset entry of the compressor to commu-
+ * nicate to its caller how to deal with sending of a Reset Ack. In this
+ * case, expra is not used, but other options still apply (suppressing
+ * sending with rsend, appending arbitrary data, etc).
+ */
+
+#define IPPP_RESET_MAXDATABYTES	32
+
+struct isdn_ppp_resetparams {
+  unsigned char valid:1;	/* rw Is this structure filled at all ? */
+  unsigned char rsend:1;	/* rw Should we send one at all ? */
+  unsigned char idval:1;	/* rw Is the id field valid ? */
+  unsigned char dtval:1;	/* rw Is the data field valid ? */
+  unsigned char expra:1;	/* rw Is an Ack expected for this Req ? */
+  unsigned char id;		/* wo Send CCP ResetReq with this id */
+  unsigned short maxdlen;	/* ro Max bytes to be stored in data field */
+  unsigned short dlen;		/* rw Bytes stored in data field */
+  unsigned char *data;		/* wo Data for ResetReq info field */
+};
+
+/*
+ * this is an 'old friend' from ppp-comp.h under a new name 
+ * check the original include for more information
+ */
+struct isdn_ppp_compressor {
+  struct isdn_ppp_compressor *next, *prev;
+  struct module *owner;
+  int num; /* CCP compression protocol number */
+  
+  void *(*alloc) (struct isdn_ppp_comp_data *);
+  void (*free) (void *state);
+  int  (*init) (void *state, struct isdn_ppp_comp_data *,
+		int unit,int debug);
+  
+  /* The reset entry needs to get more exact information about the
+     ResetReq or ResetAck it was called with. The parameters are
+     obvious. If reset is called without a Req or Ack frame which
+     could be handed into it, code MUST be set to 0. Using rsparm,
+     the reset entry can control if and how a ResetAck is returned. */
+  
+  void (*reset) (void *state, unsigned char code, unsigned char id,
+		 unsigned char *data, unsigned len,
+		 struct isdn_ppp_resetparams *rsparm);
+  
+  int  (*compress) (void *state, struct sk_buff *in,
+		    struct sk_buff *skb_out, int proto);
+  
+	int  (*decompress) (void *state,struct sk_buff *in,
+			    struct sk_buff *skb_out,
+			    struct isdn_ppp_resetparams *rsparm);
+  
+  void (*incomp) (void *state, struct sk_buff *in,int proto);
+  void (*stat) (void *state, struct compstat *stats);
+};
+
+extern int isdn_ppp_register_compressor(struct isdn_ppp_compressor *);
+extern int isdn_ppp_unregister_compressor(struct isdn_ppp_compressor *);
+extern int isdn_ppp_dial_slave(char *);
+extern int isdn_ppp_hangup_slave(char *);
+
+typedef struct {
+  unsigned long seqerrs;
+  unsigned long frame_drops;
+  unsigned long overflows;
+  unsigned long max_queue_len;
+} isdn_mppp_stats;
+
+typedef struct {
+  int mp_mrru;                        /* unused                             */
+  struct sk_buff * frags;	/* fragments sl list -- use skb->next */
+  long frames;			/* number of frames in the frame list */
+  unsigned int seq;		/* last processed packet seq #: any packets
+  				 * with smaller seq # will be dropped
+				 * unconditionally */
+  spinlock_t lock;
+  int ref_ct;				 
+  /* statistics */
+  isdn_mppp_stats stats;
+} ippp_bundle;
+
+#define NUM_RCV_BUFFS     64
+
+struct ippp_buf_queue {
+  struct ippp_buf_queue *next;
+  struct ippp_buf_queue *last;
+  char *buf;                 /* NULL here indicates end of queue */
+  int len;
+};
+
+/* The data structure for one CCP reset transaction */
+enum ippp_ccp_reset_states {
+  CCPResetIdle,
+  CCPResetSentReq,
+  CCPResetRcvdReq,
+  CCPResetSentAck,
+  CCPResetRcvdAck
+};
+
+struct ippp_ccp_reset_state {
+  enum ippp_ccp_reset_states state;	/* State of this transaction */
+  struct ippp_struct *is;		/* Backlink to device stuff */
+  unsigned char id;			/* Backlink id index */
+  unsigned char ta:1;			/* The timer is active (flag) */
+  unsigned char expra:1;		/* We expect a ResetAck at all */
+  int dlen;				/* Databytes stored in data */
+  struct timer_list timer;		/* For timeouts/retries */
+  /* This is a hack but seems sufficient for the moment. We do not want
+     to have this be yet another allocation for some bytes, it is more
+     memory management overhead than the whole mess is worth. */
+  unsigned char data[IPPP_RESET_MAXDATABYTES];
+};
+
+/* The data structure keeping track of the currently outstanding CCP Reset
+   transactions. */
+struct ippp_ccp_reset {
+  struct ippp_ccp_reset_state *rs[256];	/* One per possible id */
+  unsigned char lastid;			/* Last id allocated by the engine */
+};
+
+struct ippp_struct {
+  struct ippp_struct *next_link;
+  int state;
+  spinlock_t buflock;
+  struct ippp_buf_queue rq[NUM_RCV_BUFFS]; /* packet queue for isdn_ppp_read() */
+  struct ippp_buf_queue *first;  /* pointer to (current) first packet */
+  struct ippp_buf_queue *last;   /* pointer to (current) last used packet in queue */
+  wait_queue_head_t wq;
+  struct task_struct *tk;
+  unsigned int mpppcfg;
+  unsigned int pppcfg;
+  unsigned int mru;
+  unsigned int mpmru;
+  unsigned int mpmtu;
+  unsigned int maxcid;
+  struct isdn_net_local_s *lp;
+  int unit;
+  int minor;
+  unsigned int last_link_seqno;
+  long mp_seqno;
+#ifdef CONFIG_ISDN_PPP_VJ
+  unsigned char *cbuf;
+  struct slcompress *slcomp;
+#endif
+#ifdef CONFIG_IPPP_FILTER
+  struct sock_filter *pass_filter;	/* filter for packets to pass */
+  struct sock_filter *active_filter;	/* filter for pkts to reset idle */
+  unsigned pass_len, active_len;
+#endif
+  unsigned long debug;
+  struct isdn_ppp_compressor *compressor,*decompressor;
+  struct isdn_ppp_compressor *link_compressor,*link_decompressor;
+  void *decomp_stat,*comp_stat,*link_decomp_stat,*link_comp_stat;
+  struct ippp_ccp_reset *reset;	/* Allocated on demand, may never be needed */
+  unsigned long compflags;
+};
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_ISDN_PPP_H */
diff --git a/include/linux/isdnif.h b/include/linux/isdnif.h
new file mode 100644
index 00000000..b8c23f88
--- /dev/null
+++ b/include/linux/isdnif.h
@@ -0,0 +1,546 @@
+/* $Id: isdnif.h,v 1.43.2.2 2004/01/12 23:08:35 keil Exp $
+ *
+ * Linux ISDN subsystem
+ * Definition of the interface between the subsystem and its low-level drivers.
+ *
+ * Copyright 1994,95,96 by Fritz Elfert (fritz@isdn4linux.de)
+ * Copyright 1995,96    Thinking Objects Software GmbH Wuerzburg
+ * 
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef __ISDNIF_H__
+#define __ISDNIF_H__
+
+
+/*
+ * Values for general protocol-selection
+ */
+#define ISDN_PTYPE_UNKNOWN   0   /* Protocol undefined   */
+#define ISDN_PTYPE_1TR6      1   /* german 1TR6-protocol */
+#define ISDN_PTYPE_EURO      2   /* EDSS1-protocol       */
+#define ISDN_PTYPE_LEASED    3   /* for leased lines     */
+#define ISDN_PTYPE_NI1       4   /* US NI-1 protocol     */
+#define ISDN_PTYPE_MAX       7   /* Max. 8 Protocols     */
+
+/*
+ * Values for Layer-2-protocol-selection
+ */
+#define ISDN_PROTO_L2_X75I   0   /* X75/LAPB with I-Frames            */
+#define ISDN_PROTO_L2_X75UI  1   /* X75/LAPB with UI-Frames           */
+#define ISDN_PROTO_L2_X75BUI 2   /* X75/LAPB with UI-Frames           */
+#define ISDN_PROTO_L2_HDLC   3   /* HDLC                              */
+#define ISDN_PROTO_L2_TRANS  4   /* Transparent (Voice)               */
+#define ISDN_PROTO_L2_X25DTE 5   /* X25/LAPB DTE mode                 */
+#define ISDN_PROTO_L2_X25DCE 6   /* X25/LAPB DCE mode                 */
+#define ISDN_PROTO_L2_V11096 7   /* V.110 bitrate adaption 9600 Baud  */
+#define ISDN_PROTO_L2_V11019 8   /* V.110 bitrate adaption 19200 Baud */
+#define ISDN_PROTO_L2_V11038 9   /* V.110 bitrate adaption 38400 Baud */
+#define ISDN_PROTO_L2_MODEM  10  /* Analog Modem on Board */
+#define ISDN_PROTO_L2_FAX    11  /* Fax Group 2/3         */
+#define ISDN_PROTO_L2_HDLC_56K 12   /* HDLC 56k                          */
+#define ISDN_PROTO_L2_MAX    15  /* Max. 16 Protocols                 */
+
+/*
+ * Values for Layer-3-protocol-selection
+ */
+#define ISDN_PROTO_L3_TRANS	0	/* Transparent */
+#define ISDN_PROTO_L3_TRANSDSP	1	/* Transparent with DSP */
+#define ISDN_PROTO_L3_FCLASS2	2	/* Fax Group 2/3 CLASS 2 */
+#define ISDN_PROTO_L3_FCLASS1	3	/* Fax Group 2/3 CLASS 1 */
+#define ISDN_PROTO_L3_MAX	7	/* Max. 8 Protocols */
+
+#ifdef __KERNEL__
+
+#include <linux/skbuff.h>
+
+/***************************************************************************/
+/* Extensions made by Werner Cornelius (werner@ikt.de)                     */
+/*                                                                         */ 
+/* The proceed command holds a incoming call in a state to leave processes */
+/* enough time to check whether ist should be accepted.                    */
+/* The PROT_IO Command extends the interface to make protocol dependent    */
+/* features available (call diversion, call waiting...).                   */
+/*                                                                         */ 
+/* The PROT_IO Command is executed with the desired driver id and the arg  */
+/* parameter coded as follows:                                             */
+/* The lower 8 bits of arg contain the desired protocol from ISDN_PTYPE    */
+/* definitions. The upper 24 bits represent the protocol specific cmd/stat.*/
+/* Any additional data is protocol and command specific.                   */
+/* This mechanism also applies to the statcallb callback STAT_PROT.        */    
+/*                                                                         */
+/* This suggested extension permits an easy expansion of protocol specific */
+/* handling. Extensions may be added at any time without changing the HL   */
+/* driver code and not getting conflicts without certifications.           */
+/* The well known CAPI 2.0 interface handles such extensions in a similar  */
+/* way. Perhaps a protocol specific module may be added and separately     */
+/* loaded and linked to the basic isdn module for handling.                */                    
+/***************************************************************************/
+
+/*****************/
+/* DSS1 commands */ 
+/*****************/
+#define DSS1_CMD_INVOKE       ((0x00 << 8) | ISDN_PTYPE_EURO)   /* invoke a supplementary service */
+#define DSS1_CMD_INVOKE_ABORT ((0x01 << 8) | ISDN_PTYPE_EURO)   /* abort a invoke cmd */
+
+/*******************************/
+/* DSS1 Status callback values */
+/*******************************/
+#define DSS1_STAT_INVOKE_RES  ((0x80 << 8) | ISDN_PTYPE_EURO)   /* Result for invocation */
+#define DSS1_STAT_INVOKE_ERR  ((0x81 << 8) | ISDN_PTYPE_EURO)   /* Error Return for invocation */
+#define DSS1_STAT_INVOKE_BRD  ((0x82 << 8) | ISDN_PTYPE_EURO)   /* Deliver invoke broadcast info */
+
+
+/*********************************************************************/
+/* structures for DSS1 commands and callback                         */
+/*                                                                   */
+/* An action is invoked by sending a DSS1_CMD_INVOKE. The ll_id, proc*/
+/* timeout, datalen and data fields must be set before calling.      */
+/*                                                                   */
+/* The return value is a positive hl_id value also delivered in the  */
+/* hl_id field. A value of zero signals no more left hl_id capacitys.*/
+/* A negative return value signals errors in LL. So if the return    */
+/* value is <= 0 no action in LL will be taken -> request ignored    */
+/*                                                                   */
+/* The timeout field must be filled with a positive value specifying */
+/* the amount of time the INVOKED process waits for a reaction from  */
+/* the network.                                                      */
+/* If a response (either error or result) is received during this    */
+/* intervall, a reporting callback is initiated and the process will */
+/* be deleted, the hl identifier will be freed.                      */
+/* If no response is received during the specified intervall, a error*/
+/* callback is initiated with timeout set to -1 and a datalen set    */
+/* to 0.                                                             */
+/* If timeout is set to a value <= 0 during INVOCATION the process is*/
+/* immediately deleted after sending the data. No callback occurs !  */
+/*                                                                   */
+/* A currently waiting process may be aborted with INVOKE_ABORT. No  */
+/* callback will occur when a process has been aborted.              */
+/*                                                                   */
+/* Broadcast invoke frames from the network are reported via the     */
+/* STAT_INVOKE_BRD callback. The ll_id is set to 0, the other fields */
+/* are supplied by the network and not by the HL.                    */   
+/*********************************************************************/
+
+/*****************/
+/* NI1 commands */ 
+/*****************/
+#define NI1_CMD_INVOKE       ((0x00 << 8) | ISDN_PTYPE_NI1)   /* invoke a supplementary service */
+#define NI1_CMD_INVOKE_ABORT ((0x01 << 8) | ISDN_PTYPE_NI1)   /* abort a invoke cmd */
+
+/*******************************/
+/* NI1 Status callback values */
+/*******************************/
+#define NI1_STAT_INVOKE_RES  ((0x80 << 8) | ISDN_PTYPE_NI1)   /* Result for invocation */
+#define NI1_STAT_INVOKE_ERR  ((0x81 << 8) | ISDN_PTYPE_NI1)   /* Error Return for invocation */
+#define NI1_STAT_INVOKE_BRD  ((0x82 << 8) | ISDN_PTYPE_NI1)   /* Deliver invoke broadcast info */
+
+typedef struct
+  { ulong ll_id; /* ID supplied by LL when executing    */
+		 /* a command and returned by HL for    */
+                 /* INVOKE_RES and INVOKE_ERR           */
+    int hl_id;   /* ID supplied by HL when called       */
+                 /* for executing a cmd and delivered   */
+                 /* for results and errors              */
+                 /* must be supplied by LL when aborting*/  
+    int proc;    /* invoke procedure used by CMD_INVOKE */
+                 /* returned by callback and broadcast  */ 
+    int timeout; /* timeout for INVOKE CMD in ms        */
+                 /* -1  in stat callback when timed out */
+                 /* error value when error callback     */
+    int datalen; /* length of cmd or stat data          */
+    u_char *data;/* pointer to data delivered or send   */
+  } isdn_cmd_stat;
+
+/*
+ * Commands from linklevel to lowlevel
+ *
+ */
+#define ISDN_CMD_IOCTL    0       /* Perform ioctl                         */
+#define ISDN_CMD_DIAL     1       /* Dial out                              */
+#define ISDN_CMD_ACCEPTD  2       /* Accept an incoming call on D-Chan.    */
+#define ISDN_CMD_ACCEPTB  3       /* Request B-Channel connect.            */
+#define ISDN_CMD_HANGUP   4       /* Hangup                                */
+#define ISDN_CMD_CLREAZ   5       /* Clear EAZ(s) of channel               */
+#define ISDN_CMD_SETEAZ   6       /* Set EAZ(s) of channel                 */
+#define ISDN_CMD_GETEAZ   7       /* Get EAZ(s) of channel                 */
+#define ISDN_CMD_SETSIL   8       /* Set Service-Indicator-List of channel */
+#define ISDN_CMD_GETSIL   9       /* Get Service-Indicator-List of channel */
+#define ISDN_CMD_SETL2   10       /* Set B-Chan. Layer2-Parameter          */
+#define ISDN_CMD_GETL2   11       /* Get B-Chan. Layer2-Parameter          */
+#define ISDN_CMD_SETL3   12       /* Set B-Chan. Layer3-Parameter          */
+#define ISDN_CMD_GETL3   13       /* Get B-Chan. Layer3-Parameter          */
+// #define ISDN_CMD_LOCK    14       /* Signal usage by upper levels          */
+// #define ISDN_CMD_UNLOCK  15       /* Release usage-lock                    */
+#define ISDN_CMD_SUSPEND 16       /* Suspend connection                    */
+#define ISDN_CMD_RESUME  17       /* Resume connection                     */
+#define ISDN_CMD_PROCEED 18       /* Proceed with call establishment       */
+#define ISDN_CMD_ALERT   19       /* Alert after Proceeding                */
+#define ISDN_CMD_REDIR   20       /* Redir a incoming call                 */
+#define ISDN_CMD_PROT_IO 21       /* Protocol specific commands            */
+#define CAPI_PUT_MESSAGE 22       /* CAPI message send down or up          */
+#define ISDN_CMD_FAXCMD  23       /* FAX commands to HL-driver             */
+#define ISDN_CMD_AUDIO   24       /* DSP, DTMF, ... settings               */
+
+/*
+ * Status-Values delivered from lowlevel to linklevel via
+ * statcallb().
+ *
+ */
+#define ISDN_STAT_STAVAIL 256    /* Raw status-data available             */
+#define ISDN_STAT_ICALL   257    /* Incoming call detected                */
+#define ISDN_STAT_RUN     258    /* Signal protocol-code is running       */
+#define ISDN_STAT_STOP    259    /* Signal halt of protocol-code          */
+#define ISDN_STAT_DCONN   260    /* Signal D-Channel connect              */
+#define ISDN_STAT_BCONN   261    /* Signal B-Channel connect              */
+#define ISDN_STAT_DHUP    262    /* Signal D-Channel disconnect           */
+#define ISDN_STAT_BHUP    263    /* Signal B-Channel disconnect           */
+#define ISDN_STAT_CINF    264    /* Charge-Info                           */
+#define ISDN_STAT_LOAD    265    /* Signal new lowlevel-driver is loaded  */
+#define ISDN_STAT_UNLOAD  266    /* Signal unload of lowlevel-driver      */
+#define ISDN_STAT_BSENT   267    /* Signal packet sent                    */
+#define ISDN_STAT_NODCH   268    /* Signal no D-Channel                   */
+#define ISDN_STAT_ADDCH   269    /* Add more Channels                     */
+#define ISDN_STAT_CAUSE   270    /* Cause-Message                         */
+#define ISDN_STAT_ICALLW  271    /* Incoming call without B-chan waiting  */
+#define ISDN_STAT_REDIR   272    /* Redir result                          */
+#define ISDN_STAT_PROT    273    /* protocol IO specific callback         */
+#define ISDN_STAT_DISPLAY 274    /* deliver a received display message    */
+#define ISDN_STAT_L1ERR   275    /* Signal Layer-1 Error                  */
+#define ISDN_STAT_FAXIND  276    /* FAX indications from HL-driver        */
+#define ISDN_STAT_AUDIO   277    /* DTMF, DSP indications                 */
+#define ISDN_STAT_DISCH   278    /* Disable/Enable channel usage          */
+
+/*
+ * Audio commands
+ */
+#define ISDN_AUDIO_SETDD	0	/* Set DTMF detection           */
+#define ISDN_AUDIO_DTMF		1	/* Rx/Tx DTMF                   */
+
+/*
+ * Values for errcode field
+ */
+#define ISDN_STAT_L1ERR_SEND 1
+#define ISDN_STAT_L1ERR_RECV 2
+
+/*
+ * Values for feature-field of interface-struct.
+ */
+/* Layer 2 */
+#define ISDN_FEATURE_L2_X75I    (0x0001 << ISDN_PROTO_L2_X75I)
+#define ISDN_FEATURE_L2_X75UI   (0x0001 << ISDN_PROTO_L2_X75UI)
+#define ISDN_FEATURE_L2_X75BUI  (0x0001 << ISDN_PROTO_L2_X75BUI)
+#define ISDN_FEATURE_L2_HDLC    (0x0001 << ISDN_PROTO_L2_HDLC)
+#define ISDN_FEATURE_L2_TRANS   (0x0001 << ISDN_PROTO_L2_TRANS)
+#define ISDN_FEATURE_L2_X25DTE  (0x0001 << ISDN_PROTO_L2_X25DTE)
+#define ISDN_FEATURE_L2_X25DCE  (0x0001 << ISDN_PROTO_L2_X25DCE)
+#define ISDN_FEATURE_L2_V11096  (0x0001 << ISDN_PROTO_L2_V11096)
+#define ISDN_FEATURE_L2_V11019  (0x0001 << ISDN_PROTO_L2_V11019)
+#define ISDN_FEATURE_L2_V11038  (0x0001 << ISDN_PROTO_L2_V11038)
+#define ISDN_FEATURE_L2_MODEM   (0x0001 << ISDN_PROTO_L2_MODEM)
+#define ISDN_FEATURE_L2_FAX	(0x0001 << ISDN_PROTO_L2_FAX)
+#define ISDN_FEATURE_L2_HDLC_56K (0x0001 << ISDN_PROTO_L2_HDLC_56K)
+
+#define ISDN_FEATURE_L2_MASK    (0x0FFFF) /* Max. 16 protocols */
+#define ISDN_FEATURE_L2_SHIFT   (0)
+
+/* Layer 3 */
+#define ISDN_FEATURE_L3_TRANS   (0x10000 << ISDN_PROTO_L3_TRANS)
+#define ISDN_FEATURE_L3_TRANSDSP (0x10000 << ISDN_PROTO_L3_TRANSDSP)
+#define ISDN_FEATURE_L3_FCLASS2	(0x10000 << ISDN_PROTO_L3_FCLASS2)
+#define ISDN_FEATURE_L3_FCLASS1	(0x10000 << ISDN_PROTO_L3_FCLASS1)
+
+#define ISDN_FEATURE_L3_MASK    (0x0FF0000) /* Max. 8 Protocols */
+#define ISDN_FEATURE_L3_SHIFT   (16)
+
+/* Signaling */
+#define ISDN_FEATURE_P_UNKNOWN  (0x1000000 << ISDN_PTYPE_UNKNOWN)
+#define ISDN_FEATURE_P_1TR6     (0x1000000 << ISDN_PTYPE_1TR6)
+#define ISDN_FEATURE_P_EURO     (0x1000000 << ISDN_PTYPE_EURO)
+#define ISDN_FEATURE_P_NI1      (0x1000000 << ISDN_PTYPE_NI1)
+
+#define ISDN_FEATURE_P_MASK     (0x0FF000000) /* Max. 8 Protocols */
+#define ISDN_FEATURE_P_SHIFT    (24)
+
+typedef struct setup_parm {
+    unsigned char phone[32];	/* Remote Phone-Number */
+    unsigned char eazmsn[32];	/* Local EAZ or MSN    */
+    unsigned char si1;      /* Service Indicator 1 */
+    unsigned char si2;      /* Service Indicator 2 */
+    unsigned char plan;     /* Numbering plan      */
+    unsigned char screen;   /* Screening info      */
+} setup_parm;
+
+
+#ifdef CONFIG_ISDN_TTY_FAX
+/* T.30 Fax G3 */
+
+#define FAXIDLEN 21
+
+typedef struct T30_s {
+	/* session parameters */
+	__u8 resolution;
+	__u8 rate;
+	__u8 width;
+	__u8 length;
+	__u8 compression;
+	__u8 ecm;
+	__u8 binary;
+	__u8 scantime;
+	__u8 id[FAXIDLEN];
+	/* additional parameters */
+	__u8 phase;
+	__u8 direction;
+	__u8 code;
+	__u8 badlin;
+	__u8 badmul;
+	__u8 bor;
+	__u8 fet;
+	__u8 pollid[FAXIDLEN];
+	__u8 cq;
+	__u8 cr;
+	__u8 ctcrty;
+	__u8 minsp;
+	__u8 phcto;
+	__u8 rel;
+	__u8 nbc;
+	/* remote station parameters */
+	__u8 r_resolution;
+	__u8 r_rate;
+	__u8 r_width;
+	__u8 r_length;
+	__u8 r_compression;
+	__u8 r_ecm;
+	__u8 r_binary;
+	__u8 r_scantime;
+	__u8 r_id[FAXIDLEN];
+	__u8 r_code;
+} __packed T30_s;
+
+#define ISDN_TTY_FAX_CONN_IN	0
+#define ISDN_TTY_FAX_CONN_OUT	1
+
+#define ISDN_TTY_FAX_FCON	0
+#define ISDN_TTY_FAX_DIS 	1
+#define ISDN_TTY_FAX_FTT 	2
+#define ISDN_TTY_FAX_MCF 	3
+#define ISDN_TTY_FAX_DCS 	4
+#define ISDN_TTY_FAX_TRAIN_OK	5
+#define ISDN_TTY_FAX_EOP 	6
+#define ISDN_TTY_FAX_EOM 	7
+#define ISDN_TTY_FAX_MPS 	8
+#define ISDN_TTY_FAX_DTC 	9
+#define ISDN_TTY_FAX_RID 	10
+#define ISDN_TTY_FAX_HNG 	11
+#define ISDN_TTY_FAX_DT  	12
+#define ISDN_TTY_FAX_FCON_I	13
+#define ISDN_TTY_FAX_DR  	14
+#define ISDN_TTY_FAX_ET  	15
+#define ISDN_TTY_FAX_CFR 	16
+#define ISDN_TTY_FAX_PTS 	17
+#define ISDN_TTY_FAX_SENT	18
+
+#define ISDN_FAX_PHASE_IDLE	0
+#define ISDN_FAX_PHASE_A	1
+#define ISDN_FAX_PHASE_B   	2
+#define ISDN_FAX_PHASE_C   	3
+#define ISDN_FAX_PHASE_D   	4
+#define ISDN_FAX_PHASE_E   	5
+
+#endif /* TTY_FAX */
+
+#define ISDN_FAX_CLASS1_FAE	0
+#define ISDN_FAX_CLASS1_FTS	1
+#define ISDN_FAX_CLASS1_FRS	2
+#define ISDN_FAX_CLASS1_FTM	3
+#define ISDN_FAX_CLASS1_FRM	4
+#define ISDN_FAX_CLASS1_FTH	5
+#define ISDN_FAX_CLASS1_FRH	6
+#define ISDN_FAX_CLASS1_CTRL	7
+
+#define ISDN_FAX_CLASS1_OK	0
+#define ISDN_FAX_CLASS1_CONNECT	1
+#define ISDN_FAX_CLASS1_NOCARR	2
+#define ISDN_FAX_CLASS1_ERROR	3
+#define ISDN_FAX_CLASS1_FCERROR	4
+#define ISDN_FAX_CLASS1_QUERY	5
+
+typedef struct {
+	__u8	cmd;
+	__u8	subcmd;
+	__u8	para[50];
+} aux_s;
+
+#define AT_COMMAND	0
+#define AT_EQ_VALUE	1
+#define AT_QUERY	2
+#define AT_EQ_QUERY	3
+
+/* CAPI structs */
+
+/* this is compatible to the old union size */
+#define MAX_CAPI_PARA_LEN 50
+
+typedef struct {
+	/* Header */
+	__u16 Length;
+	__u16 ApplId;
+	__u8 Command;
+	__u8 Subcommand;
+	__u16 Messagenumber;
+
+	/* Parameter */
+	union {
+		__u32 Controller;
+		__u32 PLCI;
+		__u32 NCCI;
+	} adr;
+	__u8 para[MAX_CAPI_PARA_LEN];
+} capi_msg;
+
+/*
+ * Structure for exchanging above infos
+ *
+ */
+typedef struct {
+	int   driver;		/* Lowlevel-Driver-ID            */
+	int   command;		/* Command or Status (see above) */
+	ulong arg;		/* Additional Data               */
+	union {
+		ulong errcode;	/* Type of error with STAT_L1ERR	*/
+		int length;	/* Amount of bytes sent with STAT_BSENT	*/
+		u_char num[50];	/* Additional Data			*/
+		setup_parm setup;/* For SETUP msg			*/
+		capi_msg cmsg;	/* For CAPI like messages		*/
+		char display[85];/* display message data		*/ 
+		isdn_cmd_stat isdn_io; /* ISDN IO-parameter/result	*/
+		aux_s aux;	/* for modem commands/indications	*/
+#ifdef CONFIG_ISDN_TTY_FAX
+		T30_s	*fax;	/* Pointer to ttys fax struct		*/
+#endif
+		ulong userdata;	/* User Data */
+	} parm;
+} isdn_ctrl;
+
+#define dss1_io    isdn_io
+#define ni1_io     isdn_io
+
+/*
+ * The interface-struct itself (initialized at load-time of lowlevel-driver)
+ *
+ * See Documentation/isdn/INTERFACE for a description, how the communication
+ * between the ISDN subsystem and its drivers is done.
+ *
+ */
+typedef struct {
+  struct module *owner;
+
+  /* Number of channels supported by this driver
+   */
+  int channels;
+
+  /* 
+   * Maximum Size of transmit/receive-buffer this driver supports.
+   */
+  int maxbufsize;
+
+  /* Feature-Flags for this driver.
+   * See defines ISDN_FEATURE_... for Values
+   */
+  unsigned long features;
+
+  /*
+   * Needed for calculating
+   * dev->hard_header_len = linklayer header + hl_hdrlen;
+   * Drivers, not supporting sk_buff's should set this to 0.
+   */
+  unsigned short hl_hdrlen;
+
+  /*
+   * Receive-Callback using sk_buff's
+   * Parameters:
+   *             int                    Driver-ID
+   *             int                    local channel-number (0 ...)
+   *             struct sk_buff *skb    received Data
+   */
+  void (*rcvcallb_skb)(int, int, struct sk_buff *);
+
+  /* Status-Callback
+   * Parameters:
+   *             isdn_ctrl*
+   *                   driver  = Driver ID.
+   *                   command = One of above ISDN_STAT_... constants.
+   *                   arg     = depending on status-type.
+   *                   num     = depending on status-type.
+   */
+  int (*statcallb)(isdn_ctrl*);
+
+  /* Send command
+   * Parameters:
+   *             isdn_ctrl*
+   *                   driver  = Driver ID.
+   *                   command = One of above ISDN_CMD_... constants.
+   *                   arg     = depending on command.
+   *                   num     = depending on command.
+   */
+  int (*command)(isdn_ctrl*);
+
+  /*
+   * Send data using sk_buff's
+   * Parameters:
+   *             int                    driverId
+   *             int                    local channel-number (0...)
+   *             int                    Flag: Need ACK for this packet.
+   *             struct sk_buff *skb    Data to send
+   */
+  int (*writebuf_skb) (int, int, int, struct sk_buff *);
+
+  /* Send raw D-Channel-Commands
+   * Parameters:
+   *             u_char pointer data
+   *             int    length of data
+   *             int    driverId
+   *             int    local channel-number (0 ...)
+   */
+  int (*writecmd)(const u_char __user *, int, int, int);
+
+  /* Read raw Status replies
+   *             u_char pointer data (volatile)
+   *             int    length of buffer
+   *             int    driverId
+   *             int    local channel-number (0 ...)
+   */
+  int (*readstat)(u_char __user *, int, int, int);
+
+  char id[20];
+} isdn_if;
+
+/*
+ * Function which must be called by lowlevel-driver at loadtime with
+ * the following fields of above struct set:
+ *
+ * channels     Number of channels that will be supported.
+ * hl_hdrlen    Space to preserve in sk_buff's when sending. Drivers, not
+ *              supporting sk_buff's should set this to 0.
+ * command      Address of Command-Handler.
+ * features     Bitwise coded Features of this driver. (use ISDN_FEATURE_...)
+ * writebuf_skb Address of Skbuff-Send-Handler.
+ * writecmd        "    "  D-Channel  " which accepts raw D-Ch-Commands.
+ * readstat        "    "  D-Channel  " which delivers raw Status-Data.
+ *
+ * The linklevel-driver fills the following fields:
+ *
+ * channels      Driver-ID assigned to this driver. (Must be used on all
+ *               subsequent callbacks.
+ * rcvcallb_skb  Address of handler for received Skbuff's.
+ * statcallb        "    "     "    for status-changes.
+ *
+ */
+extern int register_isdn(isdn_if*);
+#include <asm/uaccess.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* __ISDNIF_H__ */
diff --git a/include/linux/isicom.h b/include/linux/isicom.h
new file mode 100644
index 00000000..b92e0565
--- /dev/null
+++ b/include/linux/isicom.h
@@ -0,0 +1,84 @@
+#ifndef _LINUX_ISICOM_H
+#define _LINUX_ISICOM_H
+
+#define		YES	1
+#define		NO	0
+
+/*
+ *  ISICOM Driver definitions ...
+ *
+ */
+
+#define		ISICOM_NAME	"ISICom"
+
+/*
+ *      PCI definitions
+ */
+
+#define		DEVID_COUNT	9
+#define		VENDOR_ID	0x10b5
+
+/*
+ *	These are now officially allocated numbers
+ */
+
+#define		ISICOM_NMAJOR	112	/* normal  */
+#define		ISICOM_CMAJOR	113	/* callout */
+#define		ISICOM_MAGIC	(('M' << 8) | 'T')
+
+#define		WAKEUP_CHARS	256	/* hard coded for now	*/
+#define		TX_SIZE		254
+
+#define		BOARD_COUNT	4
+#define		PORT_COUNT	(BOARD_COUNT*16)
+
+/*   character sizes  */
+
+#define		ISICOM_CS5		0x0000
+#define		ISICOM_CS6		0x0001
+#define		ISICOM_CS7		0x0002
+#define		ISICOM_CS8		0x0003
+
+/* stop bits */
+
+#define		ISICOM_1SB		0x0000
+#define		ISICOM_2SB		0x0004
+
+/* parity */
+
+#define		ISICOM_NOPAR		0x0000
+#define		ISICOM_ODPAR		0x0008
+#define		ISICOM_EVPAR		0x0018
+
+/* flow control */
+
+#define		ISICOM_CTSRTS		0x03
+#define		ISICOM_INITIATE_XONXOFF	0x04
+#define		ISICOM_RESPOND_XONXOFF	0x08
+
+#define	BOARD(line)  (((line) >> 4) & 0x3)
+
+	/*	isi kill queue bitmap	*/
+
+#define		ISICOM_KILLTX		0x01
+#define		ISICOM_KILLRX		0x02
+
+	/* isi_board status bitmap */
+
+#define		FIRMWARE_LOADED		0x0001
+#define		BOARD_ACTIVE		0x0002
+#define		BOARD_INIT		0x0004
+
+ 	/* isi_port status bitmap  */
+
+#define		ISI_CTS			0x1000
+#define		ISI_DSR			0x2000
+#define		ISI_RI			0x4000
+#define		ISI_DCD			0x8000
+#define		ISI_DTR			0x0100
+#define		ISI_RTS			0x0200
+
+
+#define		ISI_TXOK		0x0001
+
+#endif	/*	ISICOM_H	*/
diff --git a/include/linux/iso_fs.h b/include/linux/iso_fs.h
new file mode 100644
index 00000000..4688ac42
--- /dev/null
+++ b/include/linux/iso_fs.h
@@ -0,0 +1,165 @@
+#ifndef _ISOFS_FS_H
+#define _ISOFS_FS_H
+
+#include <linux/types.h>
+#include <linux/magic.h>
+
+/*
+ * The isofs filesystem constants/structures
+ */
+
+/* This part borrowed from the bsd386 isofs */
+#define ISODCL(from, to) (to - from + 1)
+
+struct iso_volume_descriptor {
+	char type[ISODCL(1,1)]; /* 711 */
+	char id[ISODCL(2,6)];
+	char version[ISODCL(7,7)];
+	char data[ISODCL(8,2048)];
+};
+
+/* volume descriptor types */
+#define ISO_VD_PRIMARY 1
+#define ISO_VD_SUPPLEMENTARY 2
+#define ISO_VD_END 255
+
+#define ISO_STANDARD_ID "CD001"
+
+struct iso_primary_descriptor {
+	char type			[ISODCL (  1,   1)]; /* 711 */
+	char id				[ISODCL (  2,   6)];
+	char version			[ISODCL (  7,   7)]; /* 711 */
+	char unused1			[ISODCL (  8,   8)];
+	char system_id			[ISODCL (  9,  40)]; /* achars */
+	char volume_id			[ISODCL ( 41,  72)]; /* dchars */
+	char unused2			[ISODCL ( 73,  80)];
+	char volume_space_size		[ISODCL ( 81,  88)]; /* 733 */
+	char unused3			[ISODCL ( 89, 120)];
+	char volume_set_size		[ISODCL (121, 124)]; /* 723 */
+	char volume_sequence_number	[ISODCL (125, 128)]; /* 723 */
+	char logical_block_size		[ISODCL (129, 132)]; /* 723 */
+	char path_table_size		[ISODCL (133, 140)]; /* 733 */
+	char type_l_path_table		[ISODCL (141, 144)]; /* 731 */
+	char opt_type_l_path_table	[ISODCL (145, 148)]; /* 731 */
+	char type_m_path_table		[ISODCL (149, 152)]; /* 732 */
+	char opt_type_m_path_table	[ISODCL (153, 156)]; /* 732 */
+	char root_directory_record	[ISODCL (157, 190)]; /* 9.1 */
+	char volume_set_id		[ISODCL (191, 318)]; /* dchars */
+	char publisher_id		[ISODCL (319, 446)]; /* achars */
+	char preparer_id		[ISODCL (447, 574)]; /* achars */
+	char application_id		[ISODCL (575, 702)]; /* achars */
+	char copyright_file_id		[ISODCL (703, 739)]; /* 7.5 dchars */
+	char abstract_file_id		[ISODCL (740, 776)]; /* 7.5 dchars */
+	char bibliographic_file_id	[ISODCL (777, 813)]; /* 7.5 dchars */
+	char creation_date		[ISODCL (814, 830)]; /* 8.4.26.1 */
+	char modification_date		[ISODCL (831, 847)]; /* 8.4.26.1 */
+	char expiration_date		[ISODCL (848, 864)]; /* 8.4.26.1 */
+	char effective_date		[ISODCL (865, 881)]; /* 8.4.26.1 */
+	char file_structure_version	[ISODCL (882, 882)]; /* 711 */
+	char unused4			[ISODCL (883, 883)];
+	char application_data		[ISODCL (884, 1395)];
+	char unused5			[ISODCL (1396, 2048)];
+};
+
+/* Almost the same as the primary descriptor but two fields are specified */
+struct iso_supplementary_descriptor {
+	char type			[ISODCL (  1,   1)]; /* 711 */
+	char id				[ISODCL (  2,   6)];
+	char version			[ISODCL (  7,   7)]; /* 711 */
+	char flags			[ISODCL (  8,   8)]; /* 853 */
+	char system_id			[ISODCL (  9,  40)]; /* achars */
+	char volume_id			[ISODCL ( 41,  72)]; /* dchars */
+	char unused2			[ISODCL ( 73,  80)];
+	char volume_space_size		[ISODCL ( 81,  88)]; /* 733 */
+	char escape			[ISODCL ( 89, 120)]; /* 856 */
+	char volume_set_size		[ISODCL (121, 124)]; /* 723 */
+	char volume_sequence_number	[ISODCL (125, 128)]; /* 723 */
+	char logical_block_size		[ISODCL (129, 132)]; /* 723 */
+	char path_table_size		[ISODCL (133, 140)]; /* 733 */
+	char type_l_path_table		[ISODCL (141, 144)]; /* 731 */
+	char opt_type_l_path_table	[ISODCL (145, 148)]; /* 731 */
+	char type_m_path_table		[ISODCL (149, 152)]; /* 732 */
+	char opt_type_m_path_table	[ISODCL (153, 156)]; /* 732 */
+	char root_directory_record	[ISODCL (157, 190)]; /* 9.1 */
+	char volume_set_id		[ISODCL (191, 318)]; /* dchars */
+	char publisher_id		[ISODCL (319, 446)]; /* achars */
+	char preparer_id		[ISODCL (447, 574)]; /* achars */
+	char application_id		[ISODCL (575, 702)]; /* achars */
+	char copyright_file_id		[ISODCL (703, 739)]; /* 7.5 dchars */
+	char abstract_file_id		[ISODCL (740, 776)]; /* 7.5 dchars */
+	char bibliographic_file_id	[ISODCL (777, 813)]; /* 7.5 dchars */
+	char creation_date		[ISODCL (814, 830)]; /* 8.4.26.1 */
+	char modification_date		[ISODCL (831, 847)]; /* 8.4.26.1 */
+	char expiration_date		[ISODCL (848, 864)]; /* 8.4.26.1 */
+	char effective_date		[ISODCL (865, 881)]; /* 8.4.26.1 */
+	char file_structure_version	[ISODCL (882, 882)]; /* 711 */
+	char unused4			[ISODCL (883, 883)];
+	char application_data		[ISODCL (884, 1395)];
+	char unused5			[ISODCL (1396, 2048)];
+};
+
+
+#define HS_STANDARD_ID "CDROM"
+
+struct  hs_volume_descriptor {
+	char foo			[ISODCL (  1,   8)]; /* 733 */
+	char type			[ISODCL (  9,   9)]; /* 711 */
+	char id				[ISODCL ( 10,  14)];
+	char version			[ISODCL ( 15,  15)]; /* 711 */
+	char data[ISODCL(16,2048)];
+};
+
+
+struct hs_primary_descriptor {
+	char foo			[ISODCL (  1,   8)]; /* 733 */
+	char type			[ISODCL (  9,   9)]; /* 711 */
+	char id				[ISODCL ( 10,  14)];
+	char version			[ISODCL ( 15,  15)]; /* 711 */
+	char unused1			[ISODCL ( 16,  16)]; /* 711 */
+	char system_id			[ISODCL ( 17,  48)]; /* achars */
+	char volume_id			[ISODCL ( 49,  80)]; /* dchars */
+	char unused2			[ISODCL ( 81,  88)]; /* 733 */
+	char volume_space_size		[ISODCL ( 89,  96)]; /* 733 */
+	char unused3			[ISODCL ( 97, 128)]; /* 733 */
+	char volume_set_size		[ISODCL (129, 132)]; /* 723 */
+	char volume_sequence_number	[ISODCL (133, 136)]; /* 723 */
+	char logical_block_size		[ISODCL (137, 140)]; /* 723 */
+	char path_table_size		[ISODCL (141, 148)]; /* 733 */
+	char type_l_path_table		[ISODCL (149, 152)]; /* 731 */
+	char unused4			[ISODCL (153, 180)]; /* 733 */
+	char root_directory_record	[ISODCL (181, 214)]; /* 9.1 */
+};
+
+/* We use this to help us look up the parent inode numbers. */
+
+struct iso_path_table{
+	unsigned char  name_len[2];	/* 721 */
+	char extent[4];		/* 731 */
+	char  parent[2];	/* 721 */
+	char name[0];
+} __attribute__((packed));
+
+/* high sierra is identical to iso, except that the date is only 6 bytes, and
+   there is an extra reserved byte after the flags */
+
+struct iso_directory_record {
+	char length			[ISODCL (1, 1)]; /* 711 */
+	char ext_attr_length		[ISODCL (2, 2)]; /* 711 */
+	char extent			[ISODCL (3, 10)]; /* 733 */
+	char size			[ISODCL (11, 18)]; /* 733 */
+	char date			[ISODCL (19, 25)]; /* 7 by 711 */
+	char flags			[ISODCL (26, 26)];
+	char file_unit_size		[ISODCL (27, 27)]; /* 711 */
+	char interleave			[ISODCL (28, 28)]; /* 711 */
+	char volume_sequence_number	[ISODCL (29, 32)]; /* 723 */
+	unsigned char name_len		[ISODCL (33, 33)]; /* 711 */
+	char name			[0];
+} __attribute__((packed));
+
+#define ISOFS_BLOCK_BITS 11
+#define ISOFS_BLOCK_SIZE 2048
+
+#define ISOFS_BUFFER_SIZE(INODE) ((INODE)->i_sb->s_blocksize)
+#define ISOFS_BUFFER_BITS(INODE) ((INODE)->i_sb->s_blocksize_bits)
+
+#endif /* _ISOFS_FS_H */
diff --git a/include/linux/istallion.h b/include/linux/istallion.h
new file mode 100644
index 00000000..ad700a60
--- /dev/null
+++ b/include/linux/istallion.h
@@ -0,0 +1,123 @@
+/*****************************************************************************/
+
+/*
+ *	istallion.h  -- stallion intelligent multiport serial driver.
+ *
+ *	Copyright (C) 1996-1998  Stallion Technologies
+ *	Copyright (C) 1994-1996  Greg Ungerer.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License
+ *	along with this program; if not, write to the Free Software
+ *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*****************************************************************************/
+#ifndef	_ISTALLION_H
+#define	_ISTALLION_H
+/*****************************************************************************/
+
+/*
+ *	Define important driver constants here.
+ */
+#define	STL_MAXBRDS		4
+#define	STL_MAXPANELS		4
+#define	STL_MAXPORTS		64
+#define	STL_MAXCHANS		(STL_MAXPORTS + 1)
+#define	STL_MAXDEVS		(STL_MAXBRDS * STL_MAXPORTS)
+
+
+/*
+ *	Define a set of structures to hold all the board/panel/port info
+ *	for our ports. These will be dynamically allocated as required at
+ *	driver initialization time.
+ */
+
+/*
+ *	Port and board structures to hold status info about each object.
+ *	The board structure contains pointers to structures for each port
+ *	connected to it. Panels are not distinguished here, since
+ *	communication with the slave board will always be on a per port
+ *	basis.
+ */
+struct stliport {
+	unsigned long		magic;
+	struct tty_port		port;
+	unsigned int		portnr;
+	unsigned int		panelnr;
+	unsigned int		brdnr;
+	unsigned long		state;
+	unsigned int		devnr;
+	int			baud_base;
+	int			custom_divisor;
+	int			closing_wait;
+	int			rc;
+	int			argsize;
+	void			*argp;
+	unsigned int		rxmarkmsk;
+	wait_queue_head_t	raw_wait;
+	struct asysigs		asig;
+	unsigned long		addr;
+	unsigned long		rxoffset;
+	unsigned long		txoffset;
+	unsigned long		sigs;
+	unsigned long		pflag;
+	unsigned int		rxsize;
+	unsigned int		txsize;
+	unsigned char		reqbit;
+	unsigned char		portidx;
+	unsigned char		portbit;
+};
+
+/*
+ *	Use a structure of function pointers to do board level operations.
+ *	These include, enable/disable, paging shared memory, interrupting, etc.
+ */
+struct stlibrd {
+	unsigned long	magic;
+	unsigned int	brdnr;
+	unsigned int	brdtype;
+	unsigned long	state;
+	unsigned int	nrpanels;
+	unsigned int	nrports;
+	unsigned int	nrdevs;
+	unsigned int	iobase;
+	int		iosize;
+	unsigned long	memaddr;
+	void		__iomem *membase;
+	unsigned long	memsize;
+	int		pagesize;
+	int		hostoffset;
+	int		slaveoffset;
+	int		bitsize;
+	int		enabval;
+	unsigned int	panels[STL_MAXPANELS];
+	int		panelids[STL_MAXPANELS];
+	void		(*init)(struct stlibrd *brdp);
+	void		(*enable)(struct stlibrd *brdp);
+	void		(*reenable)(struct stlibrd *brdp);
+	void		(*disable)(struct stlibrd *brdp);
+	void		__iomem *(*getmemptr)(struct stlibrd *brdp, unsigned long offset, int line);
+	void		(*intr)(struct stlibrd *brdp);
+	void		(*reset)(struct stlibrd *brdp);
+	struct stliport	*ports[STL_MAXPORTS];
+};
+
+
+/*
+ *	Define MAGIC numbers used for above structures.
+ */
+#define	STLI_PORTMAGIC	0xe671c7a1
+#define	STLI_BOARDMAGIC	0x4bc6c825
+
+/*****************************************************************************/
+#endif
diff --git a/include/linux/ivtv.h b/include/linux/ivtv.h
new file mode 100644
index 00000000..42bf7257
--- /dev/null
+++ b/include/linux/ivtv.h
@@ -0,0 +1,73 @@
+/*
+    Public ivtv API header
+    Copyright (C) 2003-2004  Kevin Thayer <nufan_wfk at yahoo.com>
+    Copyright (C) 2004-2007  Hans Verkuil <hverkuil@xs4all.nl>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_IVTV_H__
+#define __LINUX_IVTV_H__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/videodev2.h>
+
+/* ivtv knows several distinct output modes: MPEG streaming,
+   YUV streaming, YUV updates through user DMA and the passthrough
+   mode.
+
+   In order to clearly tell the driver that we are in user DMA
+   YUV mode you need to call IVTV_IOC_DMA_FRAME with y_source == NULL
+   first (althrough if you don't then the first time
+   DMA_FRAME is called the mode switch is done automatically).
+
+   When you close the file handle the user DMA mode is exited again.
+
+   While in one mode, you cannot use another mode (EBUSY is returned).
+
+   All this means that if you want to change the YUV interlacing
+   for the user DMA YUV mode you first need to do call IVTV_IOC_DMA_FRAME
+   with y_source == NULL before you can set the correct format using
+   VIDIOC_S_FMT.
+
+   Eventually all this should be replaced with a proper V4L2 API,
+   but for now we have to do it this way. */
+
+struct ivtv_dma_frame {
+	enum v4l2_buf_type type; /* V4L2_BUF_TYPE_VIDEO_OUTPUT */
+	__u32 pixelformat;	 /* 0 == same as destination */
+	void __user *y_source;   /* if NULL and type == V4L2_BUF_TYPE_VIDEO_OUTPUT,
+				    then just switch to user DMA YUV output mode */
+	void __user *uv_source;  /* Unused for RGB pixelformats */
+	struct v4l2_rect src;
+	struct v4l2_rect dst;
+	__u32 src_width;
+	__u32 src_height;
+};
+
+#define IVTV_IOC_DMA_FRAME		_IOW ('V', BASE_VIDIOC_PRIVATE+0, struct ivtv_dma_frame)
+
+/* Select the passthrough mode (if the argument is non-zero). In the passthrough
+   mode the output of the encoder is passed immediately into the decoder. */
+#define IVTV_IOC_PASSTHROUGH_MODE	_IOW ('V', BASE_VIDIOC_PRIVATE+1, int)
+
+/* Deprecated defines: applications should use the defines from videodev2.h */
+#define IVTV_SLICED_TYPE_TELETEXT_B     V4L2_MPEG_VBI_IVTV_TELETEXT_B
+#define IVTV_SLICED_TYPE_CAPTION_525    V4L2_MPEG_VBI_IVTV_CAPTION_525
+#define IVTV_SLICED_TYPE_WSS_625        V4L2_MPEG_VBI_IVTV_WSS_625
+#define IVTV_SLICED_TYPE_VPS            V4L2_MPEG_VBI_IVTV_VPS
+
+#endif /* _LINUX_IVTV_H */
diff --git a/include/linux/ivtvfb.h b/include/linux/ivtvfb.h
new file mode 100644
index 00000000..e8b92f67
--- /dev/null
+++ b/include/linux/ivtvfb.h
@@ -0,0 +1,37 @@
+/*
+    On Screen Display cx23415 Framebuffer driver
+
+    Copyright (C) 2006, 2007  Ian Armstrong <ian@iarmst.demon.co.uk>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_IVTVFB_H__
+#define __LINUX_IVTVFB_H__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+/* Framebuffer external API */
+
+struct ivtvfb_dma_frame {
+	void __user *source;
+	unsigned long dest_offset;
+	int count;
+};
+
+#define IVTVFB_IOC_DMA_FRAME 	_IOW('V', BASE_VIDIOC_PRIVATE+0, struct ivtvfb_dma_frame)
+
+#endif
diff --git a/include/linux/ixjuser.h b/include/linux/ixjuser.h
new file mode 100644
index 00000000..94ab5e94
--- /dev/null
+++ b/include/linux/ixjuser.h
@@ -0,0 +1,720 @@
+#ifndef __LINUX_IXJUSER_H
+#define __LINUX_IXJUSER_H
+
+/******************************************************************************
+ *
+ *    ixjuser.h
+ *
+ * Device Driver for Quicknet Technologies, Inc.'s Telephony cards
+ * including the Internet PhoneJACK, Internet PhoneJACK Lite,
+ * Internet PhoneJACK PCI, Internet LineJACK, Internet PhoneCARD and
+ * SmartCABLE
+ *
+ *    (c) Copyright 1999-2001  Quicknet Technologies, Inc.
+ *
+ *    This program is free software; you can redistribute it and/or
+ *    modify it under the terms of the GNU General Public License
+ *    as published by the Free Software Foundation; either version
+ *    2 of the License, or (at your option) any later version.
+ *
+ * Author:          Ed Okerson, <eokerson@quicknet.net>
+ *    
+ * Contributors:    Greg Herlein, <gherlein@quicknet.net>
+ *                  David W. Erhart, <derhart@quicknet.net>
+ *                  John Sellers, <jsellers@quicknet.net>
+ *                  Mike Preston, <mpreston@quicknet.net>
+ *
+ * More information about the hardware related to this driver can be found
+ * at our website:    http://www.quicknet.net
+ *
+ * Fixes:
+ *
+ * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR
+ * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
+ * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF QUICKNET
+ * TECHNOLOGIES, INC.HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * QUICKNET TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
+ * ON AN "AS IS" BASIS, AND QUICKNET TECHNOLOGIES, INC. HAS NO OBLIGATION 
+ * TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
+ *
+ *****************************************************************************/
+
+#include <linux/telephony.h>
+
+
+/******************************************************************************
+*
+* IOCTL's used for the Quicknet Telephony Cards
+*
+* If you use the IXJCTL_TESTRAM command, the card must be power cycled to
+* reset the SRAM values before further use.
+*
+******************************************************************************/
+
+#define IXJCTL_DSP_RESET 		_IO  ('q', 0xC0)
+
+#define IXJCTL_RING                     PHONE_RING
+#define IXJCTL_HOOKSTATE                PHONE_HOOKSTATE
+#define IXJCTL_MAXRINGS			PHONE_MAXRINGS
+#define IXJCTL_RING_CADENCE		PHONE_RING_CADENCE
+#define IXJCTL_RING_START		PHONE_RING_START
+#define IXJCTL_RING_STOP		PHONE_RING_STOP
+
+#define IXJCTL_CARDTYPE			_IOR ('q', 0xC1, int)
+#define IXJCTL_SERIAL			_IOR ('q', 0xC2, int)
+#define IXJCTL_DSP_TYPE                 _IOR ('q', 0xC3, int)
+#define IXJCTL_DSP_VERSION              _IOR ('q', 0xC4, int)
+#define IXJCTL_VERSION              	_IOR ('q', 0xDA, char *)
+#define IXJCTL_DSP_IDLE			_IO  ('q', 0xC5)
+#define IXJCTL_TESTRAM			_IO  ('q', 0xC6)
+
+/******************************************************************************
+*
+* This group of IOCTLs deal with the record settings of the DSP
+*
+* The IXJCTL_REC_DEPTH command sets the internal buffer depth of the DSP.
+* Setting a lower depth reduces latency, but increases the demand of the
+* application to service the driver without frame loss.  The DSP has 480
+* bytes of physical buffer memory for the record channel so the true
+* maximum limit is determined by how many frames will fit in the buffer.
+*
+* 1 uncompressed (480 byte) 16-bit linear frame.
+* 2 uncompressed (240 byte) 8-bit A-law/mu-law frames.
+* 15 TrueSpeech 8.5 frames.
+* 20 TrueSpeech 6.3,5.3,4.8 or 4.1 frames.
+*
+* The default in the driver is currently set to 2 frames.
+*
+* The IXJCTL_REC_VOLUME and IXJCTL_PLAY_VOLUME commands both use a Q8
+* number as a parameter, 0x100 scales the signal by 1.0, 0x200 scales the
+* signal by 2.0, 0x80 scales the signal by 0.5.  No protection is given
+* against over-scaling, if the multiplication factor times the input
+* signal exceeds 16 bits, overflow distortion will occur.  The default
+* setting is 0x100 (1.0).
+*
+* The IXJCTL_REC_LEVEL returns the average signal level (not r.m.s.) on
+* the most recently recorded frame as a 16 bit value.
+******************************************************************************/
+
+#define IXJCTL_REC_CODEC                PHONE_REC_CODEC
+#define IXJCTL_REC_START                PHONE_REC_START
+#define IXJCTL_REC_STOP                 PHONE_REC_STOP
+#define IXJCTL_REC_DEPTH		PHONE_REC_DEPTH
+#define IXJCTL_FRAME			PHONE_FRAME
+#define IXJCTL_REC_VOLUME		PHONE_REC_VOLUME
+#define IXJCTL_REC_LEVEL		PHONE_REC_LEVEL
+
+typedef enum {
+	f300_640 = 4, f300_500, f1100, f350, f400, f480, f440, f620, f20_50,
+	f133_200, f300, f300_420, f330, f300_425, f330_440, f340, f350_400,
+	f350_440, f350_450, f360, f380_420, f392, f400_425, f400_440, f400_450,
+	f420, f425, f425_450, f425_475, f435, f440_450, f440_480, f445, f450,
+	f452, f475, f480_620, f494, f500, f520, f523, f525, f540_660, f587,
+	f590, f600, f660, f700, f740, f750, f750_1450, f770, f800, f816, f850,
+	f857_1645, f900, f900_1300, f935_1215, f941_1477, f942, f950, f950_1400,
+	f975, f1000, f1020, f1050, f1100_1750, f1140, f1200, f1209, f1330, f1336,
+	lf1366, f1380, f1400, f1477, f1600, f1633_1638, f1800, f1860
+} IXJ_FILTER_FREQ;
+
+typedef struct {
+	unsigned int filter;
+	IXJ_FILTER_FREQ freq;
+	char enable;
+} IXJ_FILTER;
+
+typedef struct {
+	char enable;
+	char en_filter;
+	unsigned int filter;
+	unsigned int on1;
+	unsigned int off1;
+	unsigned int on2;
+	unsigned int off2;
+	unsigned int on3;
+	unsigned int off3;
+} IXJ_FILTER_CADENCE;
+
+#define IXJCTL_SET_FILTER		_IOW ('q', 0xC7, IXJ_FILTER *)
+#define IXJCTL_SET_FILTER_RAW		_IOW ('q', 0xDD, IXJ_FILTER_RAW *)
+#define IXJCTL_GET_FILTER_HIST		_IOW ('q', 0xC8, int)
+#define IXJCTL_FILTER_CADENCE		_IOW ('q', 0xD6, IXJ_FILTER_CADENCE *)
+#define IXJCTL_PLAY_CID			_IO  ('q', 0xD7)
+/******************************************************************************
+*
+* This IOCTL allows you to reassign values in the tone index table.  The
+* tone table has 32 entries (0 - 31), but the driver only allows entries
+* 13 - 27 to be modified, entry 0 is reserved for silence and 1 - 12 are
+* the standard DTMF digits and 28 - 31 are the DTMF tones for A, B, C & D.
+* The positions used internally for Call Progress Tones are as follows:
+*    Dial Tone   - 25
+*    Ring Back   - 26
+*    Busy Signal - 27
+*
+* The freq values are calculated as:
+* freq = cos(2 * PI * frequency / 8000)
+*
+* The most commonly needed values are already calculated and listed in the
+* enum IXJ_TONE_FREQ.  Each tone index can have two frequencies with
+* different gains, if you are only using a single frequency set the unused
+* one to 0.
+*
+* The gain values range from 0 to 15 indicating +6dB to -24dB in 2dB
+* increments.
+*
+******************************************************************************/
+
+typedef enum {
+	hz20 = 0x7ffa,
+	hz50 = 0x7fe5,
+	hz133 = 0x7f4c,
+	hz200 = 0x7e6b,
+	hz261 = 0x7d50,		/* .63 C1  */
+	hz277 = 0x7cfa,		/* .18 CS1 */
+	hz293 = 0x7c9f,		/* .66 D1  */
+	hz300 = 0x7c75,
+	hz311 = 0x7c32,		/* .13 DS1 */
+	hz329 = 0x7bbf,		/* .63 E1  */
+	hz330 = 0x7bb8,
+	hz340 = 0x7b75,
+	hz349 = 0x7b37,		/* .23 F1  */
+	hz350 = 0x7b30,
+	hz360 = 0x7ae9,
+	hz369 = 0x7aa8,		/* .99 FS1 */
+	hz380 = 0x7a56,
+	hz392 = 0x79fa,		/* .00 G1  */
+	hz400 = 0x79bb,
+	hz415 = 0x7941,		/* .30 GS1 */
+	hz420 = 0x7918,
+	hz425 = 0x78ee,
+	hz435 = 0x7899,
+	hz440 = 0x786d,		/* .00 A1  */
+	hz445 = 0x7842,
+	hz450 = 0x7815,
+	hz452 = 0x7803,
+	hz466 = 0x7784,		/* .16 AS1 */
+	hz475 = 0x7731,
+	hz480 = 0x7701,
+	hz493 = 0x7685,		/* .88 B1  */
+	hz494 = 0x767b,
+	hz500 = 0x7640,
+	hz520 = 0x7578,
+	hz523 = 0x7559,		/* .25 C2  */
+	hz525 = 0x7544,
+	hz540 = 0x74a7,
+	hz554 = 0x7411,		/* .37 CS2 */
+	hz587 = 0x72a1,		/* .33 D2  */
+	hz590 = 0x727f,
+	hz600 = 0x720b,
+	hz620 = 0x711e,
+	hz622 = 0x7106,		/* .25 DS2 */
+	hz659 = 0x6f3b,		/* .26 E2  */
+	hz660 = 0x6f2e,
+	hz698 = 0x6d3d,		/* .46 F2  */
+	hz700 = 0x6d22,
+	hz739 = 0x6b09,		/* .99 FS2 */
+	hz740 = 0x6afa,
+	hz750 = 0x6a6c,
+	hz770 = 0x694b,
+	hz783 = 0x688b,		/* .99 G2  */
+	hz800 = 0x678d,
+	hz816 = 0x6698,
+	hz830 = 0x65bf,		/* .61 GS2 */
+	hz850 = 0x6484,
+	hz857 = 0x6414,
+	hz880 = 0x629f,		/* .00 A2  */
+	hz900 = 0x6154,
+	hz932 = 0x5f35,		/* .33 AS2 */
+	hz935 = 0x5f01,
+	hz941 = 0x5e9a,
+	hz942 = 0x5e88,
+	hz950 = 0x5dfd,
+	hz975 = 0x5c44,
+	hz1000 = 0x5a81,
+	hz1020 = 0x5912,
+	hz1050 = 0x56e2,
+	hz1100 = 0x5320,
+	hz1140 = 0x5007,
+	hz1200 = 0x4b3b,
+	hz1209 = 0x4a80,
+	hz1215 = 0x4a02,
+	hz1250 = 0x471c,
+	hz1300 = 0x42e0,
+	hz1330 = 0x4049,
+	hz1336 = 0x3fc4,
+	hz1366 = 0x3d22,
+	hz1380 = 0x3be4,
+	hz1400 = 0x3a1b,
+	hz1450 = 0x3596,
+	hz1477 = 0x331c,
+	hz1500 = 0x30fb,
+	hz1600 = 0x278d,
+	hz1633 = 0x2462,
+	hz1638 = 0x23e7,
+	hz1645 = 0x233a,
+	hz1750 = 0x18f8,
+	hz1800 = 0x1405,
+	hz1860 = 0xe0b,
+	hz2100 = 0xf5f6,
+	hz2130 = 0xf2f5,
+	hz2450 = 0xd3b3,
+	hz2750 = 0xb8e4
+} IXJ_FREQ;
+
+typedef enum {
+	C1 = hz261,
+	CS1 = hz277,
+	D1 = hz293,
+	DS1 = hz311,
+	E1 = hz329,
+	F1 = hz349,
+	FS1 = hz369,
+	G1 = hz392,
+	GS1 = hz415,
+	A1 = hz440,
+	AS1 = hz466,
+	B1 = hz493,
+	C2 = hz523,
+	CS2 = hz554,
+	D2 = hz587,
+	DS2 = hz622,
+	E2 = hz659,
+	F2 = hz698,
+	FS2 = hz739,
+	G2 = hz783,
+	GS2 = hz830,
+	A2 = hz880,
+	AS2 = hz932,
+} IXJ_NOTE;
+
+typedef struct {
+	int tone_index;
+	int freq0;
+	int gain0;
+	int freq1;
+	int gain1;
+} IXJ_TONE;
+
+#define IXJCTL_INIT_TONE		_IOW ('q', 0xC9, IXJ_TONE *)
+
+/******************************************************************************
+*
+* The IXJCTL_TONE_CADENCE ioctl defines tone sequences used for various
+* Call Progress Tones (CPT).  This is accomplished by setting up an array of
+* IXJ_CADENCE_ELEMENT structures that sequentially define the states of
+* the tone sequence.  The tone_on_time and tone_off time are in
+* 250 microsecond intervals.  A pointer to this array is passed to the
+* driver as the ce element of an IXJ_CADENCE structure.  The elements_used
+* must be set to the number of IXJ_CADENCE_ELEMENTS in the array.  The
+* termination variable defines what to do at the end of a cadence, the
+* options are to play the cadence once and stop, to repeat the last
+* element of the cadence indefinitely, or to repeat the entire cadence
+* indefinitely.  The ce variable is a pointer to the array of IXJ_TONE
+* structures.  If the freq0 variable is non-zero, the tone table contents
+* for the tone_index are updated to the frequencies and gains defined.  It
+* should be noted that DTMF tones cannot be reassigned, so if DTMF tone
+* table indexes are used in a cadence the frequency and gain variables will
+* be ignored.
+*
+* If the array elements contain frequency parameters the driver will
+* initialize the needed tone table elements and begin playing the tone,
+* there is no preset limit on the number of elements in the cadence.  If
+* there is more than one frequency used in the cadence, sequential elements
+* of different frequencies MUST use different tone table indexes.  Only one
+* cadence can be played at a time.  It is possible to build complex
+* cadences with multiple frequencies using 2 tone table indexes by
+* alternating between them.
+*
+******************************************************************************/
+
+typedef struct {
+	int index;
+	int tone_on_time;
+	int tone_off_time;
+	int freq0;
+	int gain0;
+	int freq1;
+	int gain1;
+} IXJ_CADENCE_ELEMENT;
+
+typedef enum {
+	PLAY_ONCE,
+	REPEAT_LAST_ELEMENT,
+	REPEAT_ALL
+} IXJ_CADENCE_TERM;
+
+typedef struct {
+	int elements_used;
+	IXJ_CADENCE_TERM termination;
+	IXJ_CADENCE_ELEMENT __user *ce;
+} IXJ_CADENCE;
+
+#define IXJCTL_TONE_CADENCE		_IOW ('q', 0xCA, IXJ_CADENCE *)
+/******************************************************************************
+*
+* This group of IOCTLs deal with the playback settings of the DSP
+*
+******************************************************************************/
+
+#define IXJCTL_PLAY_CODEC               PHONE_PLAY_CODEC
+#define IXJCTL_PLAY_START               PHONE_PLAY_START
+#define IXJCTL_PLAY_STOP                PHONE_PLAY_STOP
+#define IXJCTL_PLAY_DEPTH		PHONE_PLAY_DEPTH
+#define IXJCTL_PLAY_VOLUME		PHONE_PLAY_VOLUME
+#define IXJCTL_PLAY_LEVEL		PHONE_PLAY_LEVEL
+
+/******************************************************************************
+*
+* This group of IOCTLs deal with the Acoustic Echo Cancellation settings
+* of the DSP
+*
+* Issuing the IXJCTL_AEC_START command with a value of AEC_OFF has the
+* same effect as IXJCTL_AEC_STOP.  This is to simplify slider bar
+* controls.  IXJCTL_AEC_GET_LEVEL returns the current setting of the AEC.
+******************************************************************************/
+#define IXJCTL_AEC_START		_IOW ('q', 0xCB, int)
+#define IXJCTL_AEC_STOP			_IO  ('q', 0xCC)
+#define IXJCTL_AEC_GET_LEVEL		_IO  ('q', 0xCD)
+
+#define AEC_OFF   0
+#define AEC_LOW   1
+#define AEC_MED   2
+#define AEC_HIGH  3
+#define AEC_AUTO  4
+#define AEC_AGC   5
+/******************************************************************************
+*
+* Call Progress Tones, DTMF, etc.
+* IXJCTL_DTMF_OOB determines if DTMF signaling is sent as Out-Of-Band
+* only.  If you pass a 1, DTMF is suppressed from the audio stream.
+* Tone on and off times are in 250 microsecond intervals so
+* ioctl(ixj1, IXJCTL_SET_TONE_ON_TIME, 360);
+* will set the tone on time of board ixj1 to 360 * 250us = 90ms
+* the default values of tone on and off times is 840 or 210ms
+******************************************************************************/
+
+#define IXJCTL_DTMF_READY		PHONE_DTMF_READY
+#define IXJCTL_GET_DTMF                 PHONE_GET_DTMF
+#define IXJCTL_GET_DTMF_ASCII           PHONE_GET_DTMF_ASCII
+#define IXJCTL_DTMF_OOB			PHONE_DTMF_OOB
+#define IXJCTL_EXCEPTION		PHONE_EXCEPTION
+#define IXJCTL_PLAY_TONE		PHONE_PLAY_TONE
+#define IXJCTL_SET_TONE_ON_TIME		PHONE_SET_TONE_ON_TIME
+#define IXJCTL_SET_TONE_OFF_TIME	PHONE_SET_TONE_OFF_TIME
+#define IXJCTL_GET_TONE_ON_TIME		PHONE_GET_TONE_ON_TIME
+#define IXJCTL_GET_TONE_OFF_TIME	PHONE_GET_TONE_OFF_TIME
+#define IXJCTL_GET_TONE_STATE		PHONE_GET_TONE_STATE
+#define IXJCTL_BUSY			PHONE_BUSY
+#define IXJCTL_RINGBACK			PHONE_RINGBACK
+#define IXJCTL_DIALTONE			PHONE_DIALTONE
+#define IXJCTL_CPT_STOP			PHONE_CPT_STOP
+
+/******************************************************************************
+* LineJACK specific IOCTLs
+*
+* The lsb 4 bits of the LED argument represent the state of each of the 4
+* LED's on the LineJACK
+******************************************************************************/
+
+#define IXJCTL_SET_LED			_IOW ('q', 0xCE, int)
+#define IXJCTL_MIXER			_IOW ('q', 0xCF, int)
+
+/******************************************************************************
+* 
+* The master volume controls use attenuation with 32 levels from 0 to -62dB
+* with steps of 2dB each, the defines should be OR'ed together then sent
+* as the parameter to the mixer command to change the mixer settings.
+* 
+******************************************************************************/
+#define MIXER_MASTER_L		0x0000
+#define MIXER_MASTER_R		0x0100
+#define ATT00DB			0x00
+#define ATT02DB			0x01
+#define ATT04DB			0x02
+#define ATT06DB			0x03
+#define ATT08DB			0x04
+#define ATT10DB			0x05
+#define ATT12DB			0x06
+#define ATT14DB			0x07
+#define ATT16DB			0x08
+#define ATT18DB			0x09
+#define ATT20DB			0x0A
+#define ATT22DB			0x0B
+#define ATT24DB			0x0C
+#define ATT26DB			0x0D
+#define ATT28DB			0x0E
+#define ATT30DB			0x0F
+#define ATT32DB			0x10
+#define ATT34DB			0x11
+#define ATT36DB			0x12
+#define ATT38DB			0x13
+#define ATT40DB			0x14
+#define ATT42DB			0x15
+#define ATT44DB			0x16
+#define ATT46DB			0x17
+#define ATT48DB			0x18
+#define ATT50DB			0x19
+#define ATT52DB			0x1A
+#define ATT54DB			0x1B
+#define ATT56DB			0x1C
+#define ATT58DB			0x1D
+#define ATT60DB			0x1E
+#define ATT62DB			0x1F
+#define MASTER_MUTE		0x80
+
+/******************************************************************************
+* 
+* The input volume controls use gain with 32 levels from +12dB to -50dB
+* with steps of 2dB each, the defines should be OR'ed together then sent
+* as the parameter to the mixer command to change the mixer settings.
+* 
+******************************************************************************/
+#define MIXER_PORT_CD_L		0x0600
+#define MIXER_PORT_CD_R		0x0700
+#define MIXER_PORT_LINE_IN_L	0x0800
+#define MIXER_PORT_LINE_IN_R	0x0900
+#define MIXER_PORT_POTS_REC	0x0C00
+#define MIXER_PORT_MIC		0x0E00
+
+#define GAIN12DB		0x00
+#define GAIN10DB		0x01
+#define GAIN08DB		0x02
+#define GAIN06DB		0x03
+#define GAIN04DB		0x04
+#define GAIN02DB		0x05
+#define GAIN00DB		0x06
+#define GAIN_02DB		0x07
+#define GAIN_04DB		0x08
+#define GAIN_06DB		0x09
+#define GAIN_08DB		0x0A
+#define GAIN_10DB		0x0B
+#define GAIN_12DB		0x0C
+#define GAIN_14DB		0x0D
+#define GAIN_16DB		0x0E
+#define GAIN_18DB		0x0F
+#define GAIN_20DB		0x10
+#define GAIN_22DB		0x11
+#define GAIN_24DB		0x12
+#define GAIN_26DB		0x13
+#define GAIN_28DB		0x14
+#define GAIN_30DB		0x15
+#define GAIN_32DB		0x16
+#define GAIN_34DB		0x17
+#define GAIN_36DB		0x18
+#define GAIN_38DB		0x19
+#define GAIN_40DB		0x1A
+#define GAIN_42DB		0x1B
+#define GAIN_44DB		0x1C
+#define GAIN_46DB		0x1D
+#define GAIN_48DB		0x1E
+#define GAIN_50DB		0x1F
+#define INPUT_MUTE		0x80
+
+/******************************************************************************
+* 
+* The POTS volume control use attenuation with 8 levels from 0dB to -28dB
+* with steps of 4dB each, the defines should be OR'ed together then sent
+* as the parameter to the mixer command to change the mixer settings.
+* 
+******************************************************************************/
+#define MIXER_PORT_POTS_PLAY	0x0F00
+
+#define POTS_ATT_00DB		0x00
+#define POTS_ATT_04DB		0x01
+#define POTS_ATT_08DB		0x02
+#define POTS_ATT_12DB		0x03
+#define POTS_ATT_16DB		0x04
+#define POTS_ATT_20DB		0x05
+#define POTS_ATT_24DB		0x06
+#define POTS_ATT_28DB		0x07
+#define POTS_MUTE		0x80
+
+/******************************************************************************
+* 
+* The DAA controls the interface to the PSTN port.  The driver loads the
+* US coefficients by default, so if you live in a different country you
+* need to load the set for your countries phone system.
+* 
+******************************************************************************/
+#define IXJCTL_DAA_COEFF_SET		_IOW ('q', 0xD0, int)
+
+#define DAA_US 		1	/*PITA 8kHz */
+#define DAA_UK 		2	/*ISAR34 8kHz */
+#define DAA_FRANCE 	3	/* */
+#define DAA_GERMANY	4
+#define DAA_AUSTRALIA	5
+#define DAA_JAPAN	6
+
+/******************************************************************************
+* 
+* Use IXJCTL_PORT to set or query the port the card is set to.  If the
+* argument is set to PORT_QUERY, the return value of the ioctl will
+* indicate which port is currently in use, otherwise it will change the
+* port.
+* 
+******************************************************************************/
+#define IXJCTL_PORT			_IOW ('q', 0xD1, int)
+
+#define PORT_QUERY	0
+#define PORT_POTS	1
+#define PORT_PSTN	2
+#define PORT_SPEAKER	3
+#define PORT_HANDSET	4
+
+#define IXJCTL_PSTN_SET_STATE		PHONE_PSTN_SET_STATE
+#define IXJCTL_PSTN_GET_STATE		PHONE_PSTN_GET_STATE
+
+#define PSTN_ON_HOOK	0
+#define PSTN_RINGING	1
+#define PSTN_OFF_HOOK	2
+#define PSTN_PULSE_DIAL	3
+
+/******************************************************************************
+* 
+* The DAA Analog GAIN sets 2 parameters at one time, the receive gain (AGRR), 
+* and the transmit gain (AGX).  OR together the components and pass them
+* as the parameter to IXJCTL_DAA_AGAIN.  The default setting is both at 0dB.
+* 
+******************************************************************************/
+#define IXJCTL_DAA_AGAIN		_IOW ('q', 0xD2, int)
+
+#define AGRR00DB	0x00	/* Analog gain in receive direction 0dB */
+#define AGRR3_5DB	0x10	/* Analog gain in receive direction 3.5dB */
+#define AGRR06DB	0x30	/* Analog gain in receive direction 6dB */
+
+#define AGX00DB		0x00	/* Analog gain in transmit direction 0dB */
+#define AGX_6DB		0x04	/* Analog gain in transmit direction -6dB */
+#define AGX3_5DB	0x08	/* Analog gain in transmit direction 3.5dB */
+#define AGX_2_5B	0x0C	/* Analog gain in transmit direction -2.5dB */
+
+#define IXJCTL_PSTN_LINETEST		_IO  ('q', 0xD3)
+
+#define IXJCTL_CID			_IOR ('q', 0xD4, PHONE_CID *)
+#define IXJCTL_VMWI			_IOR ('q', 0xD8, int)
+#define IXJCTL_CIDCW			_IOW ('q', 0xD9, PHONE_CID *)
+/******************************************************************************
+* 
+* The wink duration is tunable with this ioctl.  The default wink duration  
+* is 320ms.  You do not need to use this ioctl if you do not require a
+* different wink duration.
+* 
+******************************************************************************/
+#define IXJCTL_WINK_DURATION		PHONE_WINK_DURATION
+
+/******************************************************************************
+* 
+* This ioctl will connect the POTS port to the PSTN port on the LineJACK
+* In order for this to work properly the port selection should be set to
+* the PSTN port with IXJCTL_PORT prior to calling this ioctl.  This will
+* enable conference calls between PSTN callers and network callers.
+* Passing a 1 to this ioctl enables the POTS<->PSTN connection while
+* passing a 0 turns it back off.
+* 
+******************************************************************************/
+#define IXJCTL_POTS_PSTN		_IOW ('q', 0xD5, int)
+
+/******************************************************************************
+*
+* IOCTLs added by request.
+*
+* IXJCTL_HZ sets the value your Linux kernel uses for HZ as defined in
+*           /usr/include/asm/param.h, this determines the fundamental
+*           frequency of the clock ticks on your Linux system.  The kernel
+*           must be rebuilt if you change this value, also all modules you
+*           use (except this one) must be recompiled.  The default value
+*           is 100, and you only need to use this IOCTL if you use some
+*           other value.
+*
+*
+* IXJCTL_RATE sets the number of times per second that the driver polls
+*             the DSP.  This value cannot be larger than HZ.  By
+*             increasing both of these values, you may be able to reduce
+*             latency because the max hang time that can exist between the
+*             driver and the DSP will be reduced.
+*
+******************************************************************************/
+
+#define IXJCTL_HZ                       _IOW ('q', 0xE0, int)
+#define IXJCTL_RATE                     _IOW ('q', 0xE1, int)
+#define IXJCTL_FRAMES_READ		_IOR ('q', 0xE2, unsigned long)
+#define IXJCTL_FRAMES_WRITTEN		_IOR ('q', 0xE3, unsigned long)
+#define IXJCTL_READ_WAIT		_IOR ('q', 0xE4, unsigned long)
+#define IXJCTL_WRITE_WAIT		_IOR ('q', 0xE5, unsigned long)
+#define IXJCTL_DRYBUFFER_READ		_IOR ('q', 0xE6, unsigned long)
+#define IXJCTL_DRYBUFFER_CLEAR		_IO  ('q', 0xE7)
+#define IXJCTL_DTMF_PRESCALE		_IOW ('q', 0xE8, int)
+
+/******************************************************************************
+*
+* This ioctl allows the user application to control what events the driver
+* will send signals for, and what signals it will send for which event.
+* By default, if signaling is enabled, all events will send SIGIO when
+* they occur.  To disable signals for an event set the signal to 0.
+*
+******************************************************************************/
+typedef enum {
+	SIG_DTMF_READY,
+	SIG_HOOKSTATE,
+	SIG_FLASH,
+	SIG_PSTN_RING,
+	SIG_CALLER_ID,
+	SIG_PSTN_WINK,
+	SIG_F0, SIG_F1, SIG_F2, SIG_F3,
+	SIG_FC0, SIG_FC1, SIG_FC2, SIG_FC3,
+	SIG_READ_READY = 33,
+	SIG_WRITE_READY = 34
+} IXJ_SIGEVENT;
+
+typedef struct {
+	unsigned int event;
+	int signal;
+} IXJ_SIGDEF;
+
+#define IXJCTL_SIGCTL			_IOW ('q', 0xE9, IXJ_SIGDEF *)
+
+/******************************************************************************
+*
+* These ioctls allow the user application to change the gain in the 
+* Smart Cable of the Internet Phone Card.  Sending -1 as a value will cause
+* return value to be the current setting.  Valid values to set are 0x00 - 0x1F
+*
+* 11111 = +12 dB
+* 10111 =   0 dB
+* 00000 = -34.5 dB
+*
+* IXJCTL_SC_RXG sets the Receive gain
+* IXJCTL_SC_TXG sets the Transmit gain
+*
+******************************************************************************/
+#define IXJCTL_SC_RXG			_IOW ('q', 0xEA, int)
+#define IXJCTL_SC_TXG			_IOW ('q', 0xEB, int)
+
+/******************************************************************************
+*
+* The intercom IOCTL's short the output from one card to the input of the
+* other and vice versa (actually done in the DSP read function).  It is only
+* necessary to execute the IOCTL on one card, but it is necessary to have
+* both devices open to be able to detect hook switch changes.  The record
+* codec and rate of each card must match the playback codec and rate of
+* the other card for this to work properly.
+*
+******************************************************************************/
+
+#define IXJCTL_INTERCOM_START 		_IOW ('q', 0xFD, int)
+#define IXJCTL_INTERCOM_STOP  		_IOW ('q', 0xFE, int)
+
+/******************************************************************************
+ *
+ * new structure for accessing raw filter information
+ *
+ ******************************************************************************/
+
+typedef struct {
+	unsigned int filter;
+	char enable;
+	unsigned int coeff[19];
+} IXJ_FILTER_RAW;
+
+#endif
diff --git a/include/linux/jbd.h b/include/linux/jbd.h
new file mode 100644
index 00000000..d211732b
--- /dev/null
+++ b/include/linux/jbd.h
@@ -0,0 +1,1031 @@
+/*
+ * linux/include/linux/jbd.h
+ *
+ * Written by Stephen C. Tweedie <sct@redhat.com>
+ *
+ * Copyright 1998-2000 Red Hat, Inc --- All Rights Reserved
+ *
+ * This file is part of the Linux kernel and is made available under
+ * the terms of the GNU General Public License, version 2, or at your
+ * option, any later version, incorporated herein by reference.
+ *
+ * Definitions for transaction data structures for the buffer cache
+ * filesystem journaling support.
+ */
+
+#ifndef _LINUX_JBD_H
+#define _LINUX_JBD_H
+
+/* Allow this file to be included directly into e2fsprogs */
+#ifndef __KERNEL__
+#include "jfs_compat.h"
+#define JFS_DEBUG
+#define jfs_debug jbd_debug
+#else
+
+#include <linux/types.h>
+#include <linux/buffer_head.h>
+#include <linux/journal-head.h>
+#include <linux/stddef.h>
+#include <linux/bit_spinlock.h>
+#include <linux/mutex.h>
+#include <linux/timer.h>
+#include <linux/lockdep.h>
+#include <linux/slab.h>
+
+#define journal_oom_retry 1
+
+/*
+ * Define JBD_PARANOID_IOFAIL to cause a kernel BUG() if ext3 finds
+ * certain classes of error which can occur due to failed IOs.  Under
+ * normal use we want ext3 to continue after such errors, because
+ * hardware _can_ fail, but for debugging purposes when running tests on
+ * known-good hardware we may want to trap these errors.
+ */
+#undef JBD_PARANOID_IOFAIL
+
+/*
+ * The default maximum commit age, in seconds.
+ */
+#define JBD_DEFAULT_MAX_COMMIT_AGE 5
+
+#ifdef CONFIG_JBD_DEBUG
+/*
+ * Define JBD_EXPENSIVE_CHECKING to enable more expensive internal
+ * consistency checks.  By default we don't do this unless
+ * CONFIG_JBD_DEBUG is on.
+ */
+#define JBD_EXPENSIVE_CHECKING
+extern u8 journal_enable_debug;
+
+#define jbd_debug(n, f, a...)						\
+	do {								\
+		if ((n) <= journal_enable_debug) {			\
+			printk (KERN_DEBUG "(%s, %d): %s: ",		\
+				__FILE__, __LINE__, __func__);	\
+			printk (f, ## a);				\
+		}							\
+	} while (0)
+#else
+#define jbd_debug(f, a...)	/**/
+#endif
+
+static inline void *jbd_alloc(size_t size, gfp_t flags)
+{
+	return (void *)__get_free_pages(flags, get_order(size));
+}
+
+static inline void jbd_free(void *ptr, size_t size)
+{
+	free_pages((unsigned long)ptr, get_order(size));
+};
+
+#define JFS_MIN_JOURNAL_BLOCKS 1024
+
+
+/**
+ * typedef handle_t - The handle_t type represents a single atomic update being performed by some process.
+ *
+ * All filesystem modifications made by the process go
+ * through this handle.  Recursive operations (such as quota operations)
+ * are gathered into a single update.
+ *
+ * The buffer credits field is used to account for journaled buffers
+ * being modified by the running process.  To ensure that there is
+ * enough log space for all outstanding operations, we need to limit the
+ * number of outstanding buffers possible at any time.  When the
+ * operation completes, any buffer credits not used are credited back to
+ * the transaction, so that at all times we know how many buffers the
+ * outstanding updates on a transaction might possibly touch.
+ *
+ * This is an opaque datatype.
+ **/
+typedef struct handle_s		handle_t;	/* Atomic operation type */
+
+
+/**
+ * typedef journal_t - The journal_t maintains all of the journaling state information for a single filesystem.
+ *
+ * journal_t is linked to from the fs superblock structure.
+ *
+ * We use the journal_t to keep track of all outstanding transaction
+ * activity on the filesystem, and to manage the state of the log
+ * writing process.
+ *
+ * This is an opaque datatype.
+ **/
+typedef struct journal_s	journal_t;	/* Journal control structure */
+#endif
+
+/*
+ * Internal structures used by the logging mechanism:
+ */
+
+#define JFS_MAGIC_NUMBER 0xc03b3998U /* The first 4 bytes of /dev/random! */
+
+/*
+ * On-disk structures
+ */
+
+/*
+ * Descriptor block types:
+ */
+
+#define JFS_DESCRIPTOR_BLOCK	1
+#define JFS_COMMIT_BLOCK	2
+#define JFS_SUPERBLOCK_V1	3
+#define JFS_SUPERBLOCK_V2	4
+#define JFS_REVOKE_BLOCK	5
+
+/*
+ * Standard header for all descriptor blocks:
+ */
+typedef struct journal_header_s
+{
+	__be32		h_magic;
+	__be32		h_blocktype;
+	__be32		h_sequence;
+} journal_header_t;
+
+
+/*
+ * The block tag: used to describe a single buffer in the journal
+ */
+typedef struct journal_block_tag_s
+{
+	__be32		t_blocknr;	/* The on-disk block number */
+	__be32		t_flags;	/* See below */
+} journal_block_tag_t;
+
+/*
+ * The revoke descriptor: used on disk to describe a series of blocks to
+ * be revoked from the log
+ */
+typedef struct journal_revoke_header_s
+{
+	journal_header_t r_header;
+	__be32		 r_count;	/* Count of bytes used in the block */
+} journal_revoke_header_t;
+
+
+/* Definitions for the journal tag flags word: */
+#define JFS_FLAG_ESCAPE		1	/* on-disk block is escaped */
+#define JFS_FLAG_SAME_UUID	2	/* block has same uuid as previous */
+#define JFS_FLAG_DELETED	4	/* block deleted by this transaction */
+#define JFS_FLAG_LAST_TAG	8	/* last tag in this descriptor block */
+
+
+/*
+ * The journal superblock.  All fields are in big-endian byte order.
+ */
+typedef struct journal_superblock_s
+{
+/* 0x0000 */
+	journal_header_t s_header;
+
+/* 0x000C */
+	/* Static information describing the journal */
+	__be32	s_blocksize;		/* journal device blocksize */
+	__be32	s_maxlen;		/* total blocks in journal file */
+	__be32	s_first;		/* first block of log information */
+
+/* 0x0018 */
+	/* Dynamic information describing the current state of the log */
+	__be32	s_sequence;		/* first commit ID expected in log */
+	__be32	s_start;		/* blocknr of start of log */
+
+/* 0x0020 */
+	/* Error value, as set by journal_abort(). */
+	__be32	s_errno;
+
+/* 0x0024 */
+	/* Remaining fields are only valid in a version-2 superblock */
+	__be32	s_feature_compat;	/* compatible feature set */
+	__be32	s_feature_incompat;	/* incompatible feature set */
+	__be32	s_feature_ro_compat;	/* readonly-compatible feature set */
+/* 0x0030 */
+	__u8	s_uuid[16];		/* 128-bit uuid for journal */
+
+/* 0x0040 */
+	__be32	s_nr_users;		/* Nr of filesystems sharing log */
+
+	__be32	s_dynsuper;		/* Blocknr of dynamic superblock copy*/
+
+/* 0x0048 */
+	__be32	s_max_transaction;	/* Limit of journal blocks per trans.*/
+	__be32	s_max_trans_data;	/* Limit of data blocks per trans. */
+
+/* 0x0050 */
+	__u32	s_padding[44];
+
+/* 0x0100 */
+	__u8	s_users[16*48];		/* ids of all fs'es sharing the log */
+/* 0x0400 */
+} journal_superblock_t;
+
+#define JFS_HAS_COMPAT_FEATURE(j,mask)					\
+	((j)->j_format_version >= 2 &&					\
+	 ((j)->j_superblock->s_feature_compat & cpu_to_be32((mask))))
+#define JFS_HAS_RO_COMPAT_FEATURE(j,mask)				\
+	((j)->j_format_version >= 2 &&					\
+	 ((j)->j_superblock->s_feature_ro_compat & cpu_to_be32((mask))))
+#define JFS_HAS_INCOMPAT_FEATURE(j,mask)				\
+	((j)->j_format_version >= 2 &&					\
+	 ((j)->j_superblock->s_feature_incompat & cpu_to_be32((mask))))
+
+#define JFS_FEATURE_INCOMPAT_REVOKE	0x00000001
+
+/* Features known to this kernel version: */
+#define JFS_KNOWN_COMPAT_FEATURES	0
+#define JFS_KNOWN_ROCOMPAT_FEATURES	0
+#define JFS_KNOWN_INCOMPAT_FEATURES	JFS_FEATURE_INCOMPAT_REVOKE
+
+#ifdef __KERNEL__
+
+#include <linux/fs.h>
+#include <linux/sched.h>
+#include <linux/jbd_common.h>
+
+#define J_ASSERT(assert)	BUG_ON(!(assert))
+
+#define J_ASSERT_BH(bh, expr)	J_ASSERT(expr)
+#define J_ASSERT_JH(jh, expr)	J_ASSERT(expr)
+
+#if defined(JBD_PARANOID_IOFAIL)
+#define J_EXPECT(expr, why...)		J_ASSERT(expr)
+#define J_EXPECT_BH(bh, expr, why...)	J_ASSERT_BH(bh, expr)
+#define J_EXPECT_JH(jh, expr, why...)	J_ASSERT_JH(jh, expr)
+#else
+#define __journal_expect(expr, why...)					     \
+	({								     \
+		int val = (expr);					     \
+		if (!val) {						     \
+			printk(KERN_ERR					     \
+				"EXT3-fs unexpected failure: %s;\n",# expr); \
+			printk(KERN_ERR why "\n");			     \
+		}							     \
+		val;							     \
+	})
+#define J_EXPECT(expr, why...)		__journal_expect(expr, ## why)
+#define J_EXPECT_BH(bh, expr, why...)	__journal_expect(expr, ## why)
+#define J_EXPECT_JH(jh, expr, why...)	__journal_expect(expr, ## why)
+#endif
+
+struct jbd_revoke_table_s;
+
+/**
+ * struct handle_s - this is the concrete type associated with handle_t.
+ * @h_transaction: Which compound transaction is this update a part of?
+ * @h_buffer_credits: Number of remaining buffers we are allowed to dirty.
+ * @h_ref: Reference count on this handle
+ * @h_err: Field for caller's use to track errors through large fs operations
+ * @h_sync: flag for sync-on-close
+ * @h_jdata: flag to force data journaling
+ * @h_aborted: flag indicating fatal error on handle
+ * @h_lockdep_map: lockdep info for debugging lock problems
+ */
+struct handle_s
+{
+	/* Which compound transaction is this update a part of? */
+	transaction_t		*h_transaction;
+
+	/* Number of remaining buffers we are allowed to dirty: */
+	int			h_buffer_credits;
+
+	/* Reference count on this handle */
+	int			h_ref;
+
+	/* Field for caller's use to track errors through large fs */
+	/* operations */
+	int			h_err;
+
+	/* Flags [no locking] */
+	unsigned int	h_sync:		1;	/* sync-on-close */
+	unsigned int	h_jdata:	1;	/* force data journaling */
+	unsigned int	h_aborted:	1;	/* fatal error on handle */
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	struct lockdep_map	h_lockdep_map;
+#endif
+};
+
+
+/* The transaction_t type is the guts of the journaling mechanism.  It
+ * tracks a compound transaction through its various states:
+ *
+ * RUNNING:	accepting new updates
+ * LOCKED:	Updates still running but we don't accept new ones
+ * RUNDOWN:	Updates are tidying up but have finished requesting
+ *		new buffers to modify (state not used for now)
+ * FLUSH:       All updates complete, but we are still writing to disk
+ * COMMIT:      All data on disk, writing commit record
+ * FINISHED:	We still have to keep the transaction for checkpointing.
+ *
+ * The transaction keeps track of all of the buffers modified by a
+ * running transaction, and all of the buffers committed but not yet
+ * flushed to home for finished transactions.
+ */
+
+/*
+ * Lock ranking:
+ *
+ *    j_list_lock
+ *      ->jbd_lock_bh_journal_head()	(This is "innermost")
+ *
+ *    j_state_lock
+ *    ->jbd_lock_bh_state()
+ *
+ *    jbd_lock_bh_state()
+ *    ->j_list_lock
+ *
+ *    j_state_lock
+ *    ->t_handle_lock
+ *
+ *    j_state_lock
+ *    ->j_list_lock			(journal_unmap_buffer)
+ *
+ */
+
+struct transaction_s
+{
+	/* Pointer to the journal for this transaction. [no locking] */
+	journal_t		*t_journal;
+
+	/* Sequence number for this transaction [no locking] */
+	tid_t			t_tid;
+
+	/*
+	 * Transaction's current state
+	 * [no locking - only kjournald alters this]
+	 * [j_list_lock] guards transition of a transaction into T_FINISHED
+	 * state and subsequent call of __journal_drop_transaction()
+	 * FIXME: needs barriers
+	 * KLUDGE: [use j_state_lock]
+	 */
+	enum {
+		T_RUNNING,
+		T_LOCKED,
+		T_FLUSH,
+		T_COMMIT,
+		T_COMMIT_RECORD,
+		T_FINISHED
+	}			t_state;
+
+	/*
+	 * Where in the log does this transaction's commit start? [no locking]
+	 */
+	unsigned int		t_log_start;
+
+	/* Number of buffers on the t_buffers list [j_list_lock] */
+	int			t_nr_buffers;
+
+	/*
+	 * Doubly-linked circular list of all buffers reserved but not yet
+	 * modified by this transaction [j_list_lock]
+	 */
+	struct journal_head	*t_reserved_list;
+
+	/*
+	 * Doubly-linked circular list of all buffers under writeout during
+	 * commit [j_list_lock]
+	 */
+	struct journal_head	*t_locked_list;
+
+	/*
+	 * Doubly-linked circular list of all metadata buffers owned by this
+	 * transaction [j_list_lock]
+	 */
+	struct journal_head	*t_buffers;
+
+	/*
+	 * Doubly-linked circular list of all data buffers still to be
+	 * flushed before this transaction can be committed [j_list_lock]
+	 */
+	struct journal_head	*t_sync_datalist;
+
+	/*
+	 * Doubly-linked circular list of all forget buffers (superseded
+	 * buffers which we can un-checkpoint once this transaction commits)
+	 * [j_list_lock]
+	 */
+	struct journal_head	*t_forget;
+
+	/*
+	 * Doubly-linked circular list of all buffers still to be flushed before
+	 * this transaction can be checkpointed. [j_list_lock]
+	 */
+	struct journal_head	*t_checkpoint_list;
+
+	/*
+	 * Doubly-linked circular list of all buffers submitted for IO while
+	 * checkpointing. [j_list_lock]
+	 */
+	struct journal_head	*t_checkpoint_io_list;
+
+	/*
+	 * Doubly-linked circular list of temporary buffers currently undergoing
+	 * IO in the log [j_list_lock]
+	 */
+	struct journal_head	*t_iobuf_list;
+
+	/*
+	 * Doubly-linked circular list of metadata buffers being shadowed by log
+	 * IO.  The IO buffers on the iobuf list and the shadow buffers on this
+	 * list match each other one for one at all times. [j_list_lock]
+	 */
+	struct journal_head	*t_shadow_list;
+
+	/*
+	 * Doubly-linked circular list of control buffers being written to the
+	 * log. [j_list_lock]
+	 */
+	struct journal_head	*t_log_list;
+
+	/*
+	 * Protects info related to handles
+	 */
+	spinlock_t		t_handle_lock;
+
+	/*
+	 * Number of outstanding updates running on this transaction
+	 * [t_handle_lock]
+	 */
+	int			t_updates;
+
+	/*
+	 * Number of buffers reserved for use by all handles in this transaction
+	 * handle but not yet modified. [t_handle_lock]
+	 */
+	int			t_outstanding_credits;
+
+	/*
+	 * Forward and backward links for the circular list of all transactions
+	 * awaiting checkpoint. [j_list_lock]
+	 */
+	transaction_t		*t_cpnext, *t_cpprev;
+
+	/*
+	 * When will the transaction expire (become due for commit), in jiffies?
+	 * [no locking]
+	 */
+	unsigned long		t_expires;
+
+	/*
+	 * When this transaction started, in nanoseconds [no locking]
+	 */
+	ktime_t			t_start_time;
+
+	/*
+	 * How many handles used this transaction? [t_handle_lock]
+	 */
+	int t_handle_count;
+
+	/*
+	 * This transaction is being forced and some process is
+	 * waiting for it to finish.
+	 */
+	unsigned int t_synchronous_commit:1;
+};
+
+/**
+ * struct journal_s - this is the concrete type associated with journal_t.
+ * @j_flags:  General journaling state flags
+ * @j_errno:  Is there an outstanding uncleared error on the journal (from a
+ *     prior abort)?
+ * @j_sb_buffer: First part of superblock buffer
+ * @j_superblock: Second part of superblock buffer
+ * @j_format_version: Version of the superblock format
+ * @j_state_lock: Protect the various scalars in the journal
+ * @j_barrier_count:  Number of processes waiting to create a barrier lock
+ * @j_running_transaction: The current running transaction..
+ * @j_committing_transaction: the transaction we are pushing to disk
+ * @j_checkpoint_transactions: a linked circular list of all transactions
+ *  waiting for checkpointing
+ * @j_wait_transaction_locked: Wait queue for waiting for a locked transaction
+ *  to start committing, or for a barrier lock to be released
+ * @j_wait_logspace: Wait queue for waiting for checkpointing to complete
+ * @j_wait_done_commit: Wait queue for waiting for commit to complete
+ * @j_wait_checkpoint:  Wait queue to trigger checkpointing
+ * @j_wait_commit: Wait queue to trigger commit
+ * @j_wait_updates: Wait queue to wait for updates to complete
+ * @j_checkpoint_mutex: Mutex for locking against concurrent checkpoints
+ * @j_head: Journal head - identifies the first unused block in the journal
+ * @j_tail: Journal tail - identifies the oldest still-used block in the
+ *  journal.
+ * @j_free: Journal free - how many free blocks are there in the journal?
+ * @j_first: The block number of the first usable block
+ * @j_last: The block number one beyond the last usable block
+ * @j_dev: Device where we store the journal
+ * @j_blocksize: blocksize for the location where we store the journal.
+ * @j_blk_offset: starting block offset for into the device where we store the
+ *     journal
+ * @j_fs_dev: Device which holds the client fs.  For internal journal this will
+ *     be equal to j_dev
+ * @j_maxlen: Total maximum capacity of the journal region on disk.
+ * @j_list_lock: Protects the buffer lists and internal buffer state.
+ * @j_inode: Optional inode where we store the journal.  If present, all journal
+ *     block numbers are mapped into this inode via bmap().
+ * @j_tail_sequence:  Sequence number of the oldest transaction in the log
+ * @j_transaction_sequence: Sequence number of the next transaction to grant
+ * @j_commit_sequence: Sequence number of the most recently committed
+ *  transaction
+ * @j_commit_request: Sequence number of the most recent transaction wanting
+ *     commit
+ * @j_uuid: Uuid of client object.
+ * @j_task: Pointer to the current commit thread for this journal
+ * @j_max_transaction_buffers:  Maximum number of metadata buffers to allow in a
+ *     single compound commit transaction
+ * @j_commit_interval: What is the maximum transaction lifetime before we begin
+ *  a commit?
+ * @j_commit_timer:  The timer used to wakeup the commit thread
+ * @j_revoke_lock: Protect the revoke table
+ * @j_revoke: The revoke table - maintains the list of revoked blocks in the
+ *     current transaction.
+ * @j_revoke_table: alternate revoke tables for j_revoke
+ * @j_wbuf: array of buffer_heads for journal_commit_transaction
+ * @j_wbufsize: maximum number of buffer_heads allowed in j_wbuf, the
+ *	number that will fit in j_blocksize
+ * @j_last_sync_writer: most recent pid which did a synchronous write
+ * @j_average_commit_time: the average amount of time in nanoseconds it
+ *	takes to commit a transaction to the disk.
+ * @j_private: An opaque pointer to fs-private information.
+ */
+
+struct journal_s
+{
+	/* General journaling state flags [j_state_lock] */
+	unsigned long		j_flags;
+
+	/*
+	 * Is there an outstanding uncleared error on the journal (from a prior
+	 * abort)? [j_state_lock]
+	 */
+	int			j_errno;
+
+	/* The superblock buffer */
+	struct buffer_head	*j_sb_buffer;
+	journal_superblock_t	*j_superblock;
+
+	/* Version of the superblock format */
+	int			j_format_version;
+
+	/*
+	 * Protect the various scalars in the journal
+	 */
+	spinlock_t		j_state_lock;
+
+	/*
+	 * Number of processes waiting to create a barrier lock [j_state_lock]
+	 */
+	int			j_barrier_count;
+
+	/*
+	 * Transactions: The current running transaction...
+	 * [j_state_lock] [caller holding open handle]
+	 */
+	transaction_t		*j_running_transaction;
+
+	/*
+	 * the transaction we are pushing to disk
+	 * [j_state_lock] [caller holding open handle]
+	 */
+	transaction_t		*j_committing_transaction;
+
+	/*
+	 * ... and a linked circular list of all transactions waiting for
+	 * checkpointing. [j_list_lock]
+	 */
+	transaction_t		*j_checkpoint_transactions;
+
+	/*
+	 * Wait queue for waiting for a locked transaction to start committing,
+	 * or for a barrier lock to be released
+	 */
+	wait_queue_head_t	j_wait_transaction_locked;
+
+	/* Wait queue for waiting for checkpointing to complete */
+	wait_queue_head_t	j_wait_logspace;
+
+	/* Wait queue for waiting for commit to complete */
+	wait_queue_head_t	j_wait_done_commit;
+
+	/* Wait queue to trigger checkpointing */
+	wait_queue_head_t	j_wait_checkpoint;
+
+	/* Wait queue to trigger commit */
+	wait_queue_head_t	j_wait_commit;
+
+	/* Wait queue to wait for updates to complete */
+	wait_queue_head_t	j_wait_updates;
+
+	/* Semaphore for locking against concurrent checkpoints */
+	struct mutex		j_checkpoint_mutex;
+
+	/*
+	 * Journal head: identifies the first unused block in the journal.
+	 * [j_state_lock]
+	 */
+	unsigned int		j_head;
+
+	/*
+	 * Journal tail: identifies the oldest still-used block in the journal.
+	 * [j_state_lock]
+	 */
+	unsigned int		j_tail;
+
+	/*
+	 * Journal free: how many free blocks are there in the journal?
+	 * [j_state_lock]
+	 */
+	unsigned int		j_free;
+
+	/*
+	 * Journal start and end: the block numbers of the first usable block
+	 * and one beyond the last usable block in the journal. [j_state_lock]
+	 */
+	unsigned int		j_first;
+	unsigned int		j_last;
+
+	/*
+	 * Device, blocksize and starting block offset for the location where we
+	 * store the journal.
+	 */
+	struct block_device	*j_dev;
+	int			j_blocksize;
+	unsigned int		j_blk_offset;
+
+	/*
+	 * Device which holds the client fs.  For internal journal this will be
+	 * equal to j_dev.
+	 */
+	struct block_device	*j_fs_dev;
+
+	/* Total maximum capacity of the journal region on disk. */
+	unsigned int		j_maxlen;
+
+	/*
+	 * Protects the buffer lists and internal buffer state.
+	 */
+	spinlock_t		j_list_lock;
+
+	/* Optional inode where we store the journal.  If present, all */
+	/* journal block numbers are mapped into this inode via */
+	/* bmap(). */
+	struct inode		*j_inode;
+
+	/*
+	 * Sequence number of the oldest transaction in the log [j_state_lock]
+	 */
+	tid_t			j_tail_sequence;
+
+	/*
+	 * Sequence number of the next transaction to grant [j_state_lock]
+	 */
+	tid_t			j_transaction_sequence;
+
+	/*
+	 * Sequence number of the most recently committed transaction
+	 * [j_state_lock].
+	 */
+	tid_t			j_commit_sequence;
+
+	/*
+	 * Sequence number of the most recent transaction wanting commit
+	 * [j_state_lock]
+	 */
+	tid_t			j_commit_request;
+
+	/*
+	 * Journal uuid: identifies the object (filesystem, LVM volume etc)
+	 * backed by this journal.  This will eventually be replaced by an array
+	 * of uuids, allowing us to index multiple devices within a single
+	 * journal and to perform atomic updates across them.
+	 */
+	__u8			j_uuid[16];
+
+	/* Pointer to the current commit thread for this journal */
+	struct task_struct	*j_task;
+
+	/*
+	 * Maximum number of metadata buffers to allow in a single compound
+	 * commit transaction
+	 */
+	int			j_max_transaction_buffers;
+
+	/*
+	 * What is the maximum transaction lifetime before we begin a commit?
+	 */
+	unsigned long		j_commit_interval;
+
+	/* The timer used to wakeup the commit thread: */
+	struct timer_list	j_commit_timer;
+
+	/*
+	 * The revoke table: maintains the list of revoked blocks in the
+	 * current transaction.  [j_revoke_lock]
+	 */
+	spinlock_t		j_revoke_lock;
+	struct jbd_revoke_table_s *j_revoke;
+	struct jbd_revoke_table_s *j_revoke_table[2];
+
+	/*
+	 * array of bhs for journal_commit_transaction
+	 */
+	struct buffer_head	**j_wbuf;
+	int			j_wbufsize;
+
+	/*
+	 * this is the pid of the last person to run a synchronous operation
+	 * through the journal.
+	 */
+	pid_t			j_last_sync_writer;
+
+	/*
+	 * the average amount of time in nanoseconds it takes to commit a
+	 * transaction to the disk.  [j_state_lock]
+	 */
+	u64			j_average_commit_time;
+
+	/*
+	 * An opaque pointer to fs-private information.  ext3 puts its
+	 * superblock pointer here
+	 */
+	void *j_private;
+};
+
+/*
+ * Journal flag definitions
+ */
+#define JFS_UNMOUNT	0x001	/* Journal thread is being destroyed */
+#define JFS_ABORT	0x002	/* Journaling has been aborted for errors. */
+#define JFS_ACK_ERR	0x004	/* The errno in the sb has been acked */
+#define JFS_FLUSHED	0x008	/* The journal superblock has been flushed */
+#define JFS_LOADED	0x010	/* The journal superblock has been loaded */
+#define JFS_BARRIER	0x020	/* Use IDE barriers */
+#define JFS_ABORT_ON_SYNCDATA_ERR	0x040  /* Abort the journal on file
+						* data write error in ordered
+						* mode */
+
+/*
+ * Function declarations for the journaling transaction and buffer
+ * management
+ */
+
+/* Filing buffers */
+extern void journal_unfile_buffer(journal_t *, struct journal_head *);
+extern void __journal_unfile_buffer(struct journal_head *);
+extern void __journal_refile_buffer(struct journal_head *);
+extern void journal_refile_buffer(journal_t *, struct journal_head *);
+extern void __journal_file_buffer(struct journal_head *, transaction_t *, int);
+extern void __journal_free_buffer(struct journal_head *bh);
+extern void journal_file_buffer(struct journal_head *, transaction_t *, int);
+extern void __journal_clean_data_list(transaction_t *transaction);
+
+/* Log buffer allocation */
+extern struct journal_head * journal_get_descriptor_buffer(journal_t *);
+int journal_next_log_block(journal_t *, unsigned int *);
+
+/* Commit management */
+extern void journal_commit_transaction(journal_t *);
+
+/* Checkpoint list management */
+int __journal_clean_checkpoint_list(journal_t *journal);
+int __journal_remove_checkpoint(struct journal_head *);
+void __journal_insert_checkpoint(struct journal_head *, transaction_t *);
+
+/* Buffer IO */
+extern int
+journal_write_metadata_buffer(transaction_t	  *transaction,
+			      struct journal_head  *jh_in,
+			      struct journal_head **jh_out,
+			      unsigned int blocknr);
+
+/* Transaction locking */
+extern void		__wait_on_journal (journal_t *);
+
+/*
+ * Journal locking.
+ *
+ * We need to lock the journal during transaction state changes so that nobody
+ * ever tries to take a handle on the running transaction while we are in the
+ * middle of moving it to the commit phase.  j_state_lock does this.
+ *
+ * Note that the locking is completely interrupt unsafe.  We never touch
+ * journal structures from interrupts.
+ */
+
+static inline handle_t *journal_current_handle(void)
+{
+	return current->journal_info;
+}
+
+/* The journaling code user interface:
+ *
+ * Create and destroy handles
+ * Register buffer modifications against the current transaction.
+ */
+
+extern handle_t *journal_start(journal_t *, int nblocks);
+extern int	 journal_restart (handle_t *, int nblocks);
+extern int	 journal_extend (handle_t *, int nblocks);
+extern int	 journal_get_write_access(handle_t *, struct buffer_head *);
+extern int	 journal_get_create_access (handle_t *, struct buffer_head *);
+extern int	 journal_get_undo_access(handle_t *, struct buffer_head *);
+extern int	 journal_dirty_data (handle_t *, struct buffer_head *);
+extern int	 journal_dirty_metadata (handle_t *, struct buffer_head *);
+extern void	 journal_release_buffer (handle_t *, struct buffer_head *);
+extern int	 journal_forget (handle_t *, struct buffer_head *);
+extern void	 journal_sync_buffer (struct buffer_head *);
+extern void	 journal_invalidatepage(journal_t *,
+				struct page *, unsigned long);
+extern int	 journal_try_to_free_buffers(journal_t *, struct page *, gfp_t);
+extern int	 journal_stop(handle_t *);
+extern int	 journal_flush (journal_t *);
+extern void	 journal_lock_updates (journal_t *);
+extern void	 journal_unlock_updates (journal_t *);
+
+extern journal_t * journal_init_dev(struct block_device *bdev,
+				struct block_device *fs_dev,
+				int start, int len, int bsize);
+extern journal_t * journal_init_inode (struct inode *);
+extern int	   journal_update_format (journal_t *);
+extern int	   journal_check_used_features
+		   (journal_t *, unsigned long, unsigned long, unsigned long);
+extern int	   journal_check_available_features
+		   (journal_t *, unsigned long, unsigned long, unsigned long);
+extern int	   journal_set_features
+		   (journal_t *, unsigned long, unsigned long, unsigned long);
+extern int	   journal_create     (journal_t *);
+extern int	   journal_load       (journal_t *journal);
+extern int	   journal_destroy    (journal_t *);
+extern int	   journal_recover    (journal_t *journal);
+extern int	   journal_wipe       (journal_t *, int);
+extern int	   journal_skip_recovery	(journal_t *);
+extern void	   journal_update_superblock	(journal_t *, int);
+extern void	   journal_abort      (journal_t *, int);
+extern int	   journal_errno      (journal_t *);
+extern void	   journal_ack_err    (journal_t *);
+extern int	   journal_clear_err  (journal_t *);
+extern int	   journal_bmap(journal_t *, unsigned int, unsigned int *);
+extern int	   journal_force_commit(journal_t *);
+
+/*
+ * journal_head management
+ */
+struct journal_head *journal_add_journal_head(struct buffer_head *bh);
+struct journal_head *journal_grab_journal_head(struct buffer_head *bh);
+void journal_put_journal_head(struct journal_head *jh);
+
+/*
+ * handle management
+ */
+extern struct kmem_cache *jbd_handle_cache;
+
+static inline handle_t *jbd_alloc_handle(gfp_t gfp_flags)
+{
+	return kmem_cache_alloc(jbd_handle_cache, gfp_flags);
+}
+
+static inline void jbd_free_handle(handle_t *handle)
+{
+	kmem_cache_free(jbd_handle_cache, handle);
+}
+
+/* Primary revoke support */
+#define JOURNAL_REVOKE_DEFAULT_HASH 256
+extern int	   journal_init_revoke(journal_t *, int);
+extern void	   journal_destroy_revoke_caches(void);
+extern int	   journal_init_revoke_caches(void);
+
+extern void	   journal_destroy_revoke(journal_t *);
+extern int	   journal_revoke (handle_t *,
+				unsigned int, struct buffer_head *);
+extern int	   journal_cancel_revoke(handle_t *, struct journal_head *);
+extern void	   journal_write_revoke_records(journal_t *,
+						transaction_t *, int);
+
+/* Recovery revoke support */
+extern int	journal_set_revoke(journal_t *, unsigned int, tid_t);
+extern int	journal_test_revoke(journal_t *, unsigned int, tid_t);
+extern void	journal_clear_revoke(journal_t *);
+extern void	journal_switch_revoke_table(journal_t *journal);
+extern void	journal_clear_buffer_revoked_flags(journal_t *journal);
+
+/*
+ * The log thread user interface:
+ *
+ * Request space in the current transaction, and force transaction commit
+ * transitions on demand.
+ */
+
+int __log_space_left(journal_t *); /* Called with journal locked */
+int log_start_commit(journal_t *journal, tid_t tid);
+int __log_start_commit(journal_t *journal, tid_t tid);
+int journal_start_commit(journal_t *journal, tid_t *tid);
+int journal_force_commit_nested(journal_t *journal);
+int log_wait_commit(journal_t *journal, tid_t tid);
+int log_do_checkpoint(journal_t *journal);
+int journal_trans_will_send_data_barrier(journal_t *journal, tid_t tid);
+
+void __log_wait_for_space(journal_t *journal);
+extern void	__journal_drop_transaction(journal_t *, transaction_t *);
+extern int	cleanup_journal_tail(journal_t *);
+
+/* Debugging code only: */
+
+#define jbd_ENOSYS() \
+do {								           \
+	printk (KERN_ERR "JBD unimplemented function %s\n", __func__); \
+	current->state = TASK_UNINTERRUPTIBLE;			           \
+	schedule();						           \
+} while (1)
+
+/*
+ * is_journal_abort
+ *
+ * Simple test wrapper function to test the JFS_ABORT state flag.  This
+ * bit, when set, indicates that we have had a fatal error somewhere,
+ * either inside the journaling layer or indicated to us by the client
+ * (eg. ext3), and that we and should not commit any further
+ * transactions.
+ */
+
+static inline int is_journal_aborted(journal_t *journal)
+{
+	return journal->j_flags & JFS_ABORT;
+}
+
+static inline int is_handle_aborted(handle_t *handle)
+{
+	if (handle->h_aborted)
+		return 1;
+	return is_journal_aborted(handle->h_transaction->t_journal);
+}
+
+static inline void journal_abort_handle(handle_t *handle)
+{
+	handle->h_aborted = 1;
+}
+
+#endif /* __KERNEL__   */
+
+/* Comparison functions for transaction IDs: perform comparisons using
+ * modulo arithmetic so that they work over sequence number wraps. */
+
+static inline int tid_gt(tid_t x, tid_t y)
+{
+	int difference = (x - y);
+	return (difference > 0);
+}
+
+static inline int tid_geq(tid_t x, tid_t y)
+{
+	int difference = (x - y);
+	return (difference >= 0);
+}
+
+extern int journal_blocks_per_page(struct inode *inode);
+
+/*
+ * Return the minimum number of blocks which must be free in the journal
+ * before a new transaction may be started.  Must be called under j_state_lock.
+ */
+static inline int jbd_space_needed(journal_t *journal)
+{
+	int nblocks = journal->j_max_transaction_buffers;
+	if (journal->j_committing_transaction)
+		nblocks += journal->j_committing_transaction->
+					t_outstanding_credits;
+	return nblocks;
+}
+
+/*
+ * Definitions which augment the buffer_head layer
+ */
+
+/* journaling buffer types */
+#define BJ_None		0	/* Not journaled */
+#define BJ_SyncData	1	/* Normal data: flush before commit */
+#define BJ_Metadata	2	/* Normal journaled metadata */
+#define BJ_Forget	3	/* Buffer superseded by this transaction */
+#define BJ_IO		4	/* Buffer is for temporary IO use */
+#define BJ_Shadow	5	/* Buffer contents being shadowed to the log */
+#define BJ_LogCtl	6	/* Buffer contains log descriptors */
+#define BJ_Reserved	7	/* Buffer is reserved for access by journal */
+#define BJ_Locked	8	/* Locked for I/O during commit */
+#define BJ_Types	9
+
+extern int jbd_blocks_per_page(struct inode *inode);
+
+#ifdef __KERNEL__
+
+#define buffer_trace_init(bh)	do {} while (0)
+#define print_buffer_fields(bh)	do {} while (0)
+#define print_buffer_trace(bh)	do {} while (0)
+#define BUFFER_TRACE(bh, info)	do {} while (0)
+#define BUFFER_TRACE2(bh, bh2, info)	do {} while (0)
+#define JBUFFER_TRACE(jh, info)	do {} while (0)
+
+#endif	/* __KERNEL__ */
+
+#endif	/* _LINUX_JBD_H */
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
new file mode 100644
index 00000000..912c30a8
--- /dev/null
+++ b/include/linux/jbd2.h
@@ -0,0 +1,1282 @@
+/*
+ * linux/include/linux/jbd2.h
+ *
+ * Written by Stephen C. Tweedie <sct@redhat.com>
+ *
+ * Copyright 1998-2000 Red Hat, Inc --- All Rights Reserved
+ *
+ * This file is part of the Linux kernel and is made available under
+ * the terms of the GNU General Public License, version 2, or at your
+ * option, any later version, incorporated herein by reference.
+ *
+ * Definitions for transaction data structures for the buffer cache
+ * filesystem journaling support.
+ */
+
+#ifndef _LINUX_JBD2_H
+#define _LINUX_JBD2_H
+
+/* Allow this file to be included directly into e2fsprogs */
+#ifndef __KERNEL__
+#include "jfs_compat.h"
+#define JBD2_DEBUG
+#define jfs_debug jbd_debug
+#else
+
+#include <linux/types.h>
+#include <linux/buffer_head.h>
+#include <linux/journal-head.h>
+#include <linux/stddef.h>
+#include <linux/bit_spinlock.h>
+#include <linux/mutex.h>
+#include <linux/timer.h>
+#include <linux/slab.h>
+#endif
+
+#define journal_oom_retry 1
+
+/*
+ * Define JBD2_PARANIOD_IOFAIL to cause a kernel BUG() if ext4 finds
+ * certain classes of error which can occur due to failed IOs.  Under
+ * normal use we want ext4 to continue after such errors, because
+ * hardware _can_ fail, but for debugging purposes when running tests on
+ * known-good hardware we may want to trap these errors.
+ */
+#undef JBD2_PARANOID_IOFAIL
+
+/*
+ * The default maximum commit age, in seconds.
+ */
+#define JBD2_DEFAULT_MAX_COMMIT_AGE 5
+
+#ifdef CONFIG_JBD2_DEBUG
+/*
+ * Define JBD2_EXPENSIVE_CHECKING to enable more expensive internal
+ * consistency checks.  By default we don't do this unless
+ * CONFIG_JBD2_DEBUG is on.
+ */
+#define JBD2_EXPENSIVE_CHECKING
+extern u8 jbd2_journal_enable_debug;
+
+#define jbd_debug(n, f, a...)						\
+	do {								\
+		if ((n) <= jbd2_journal_enable_debug) {			\
+			printk (KERN_DEBUG "(%s, %d): %s: ",		\
+				__FILE__, __LINE__, __func__);	\
+			printk (f, ## a);				\
+		}							\
+	} while (0)
+#else
+#define jbd_debug(f, a...)	/**/
+#endif
+
+extern void *jbd2_alloc(size_t size, gfp_t flags);
+extern void jbd2_free(void *ptr, size_t size);
+
+#define JBD2_MIN_JOURNAL_BLOCKS 1024
+
+#ifdef __KERNEL__
+
+/**
+ * typedef handle_t - The handle_t type represents a single atomic update being performed by some process.
+ *
+ * All filesystem modifications made by the process go
+ * through this handle.  Recursive operations (such as quota operations)
+ * are gathered into a single update.
+ *
+ * The buffer credits field is used to account for journaled buffers
+ * being modified by the running process.  To ensure that there is
+ * enough log space for all outstanding operations, we need to limit the
+ * number of outstanding buffers possible at any time.  When the
+ * operation completes, any buffer credits not used are credited back to
+ * the transaction, so that at all times we know how many buffers the
+ * outstanding updates on a transaction might possibly touch.
+ *
+ * This is an opaque datatype.
+ **/
+typedef struct jbd2_journal_handle handle_t;	/* Atomic operation type */
+
+
+/**
+ * typedef journal_t - The journal_t maintains all of the journaling state information for a single filesystem.
+ *
+ * journal_t is linked to from the fs superblock structure.
+ *
+ * We use the journal_t to keep track of all outstanding transaction
+ * activity on the filesystem, and to manage the state of the log
+ * writing process.
+ *
+ * This is an opaque datatype.
+ **/
+typedef struct journal_s	journal_t;	/* Journal control structure */
+#endif
+
+/*
+ * Internal structures used by the logging mechanism:
+ */
+
+#define JBD2_MAGIC_NUMBER 0xc03b3998U /* The first 4 bytes of /dev/random! */
+
+/*
+ * On-disk structures
+ */
+
+/*
+ * Descriptor block types:
+ */
+
+#define JBD2_DESCRIPTOR_BLOCK	1
+#define JBD2_COMMIT_BLOCK	2
+#define JBD2_SUPERBLOCK_V1	3
+#define JBD2_SUPERBLOCK_V2	4
+#define JBD2_REVOKE_BLOCK	5
+
+/*
+ * Standard header for all descriptor blocks:
+ */
+typedef struct journal_header_s
+{
+	__be32		h_magic;
+	__be32		h_blocktype;
+	__be32		h_sequence;
+} journal_header_t;
+
+/*
+ * Checksum types.
+ */
+#define JBD2_CRC32_CHKSUM   1
+#define JBD2_MD5_CHKSUM     2
+#define JBD2_SHA1_CHKSUM    3
+
+#define JBD2_CRC32_CHKSUM_SIZE 4
+
+#define JBD2_CHECKSUM_BYTES (32 / sizeof(u32))
+/*
+ * Commit block header for storing transactional checksums:
+ */
+struct commit_header {
+	__be32		h_magic;
+	__be32          h_blocktype;
+	__be32          h_sequence;
+	unsigned char   h_chksum_type;
+	unsigned char   h_chksum_size;
+	unsigned char 	h_padding[2];
+	__be32 		h_chksum[JBD2_CHECKSUM_BYTES];
+	__be64		h_commit_sec;
+	__be32		h_commit_nsec;
+};
+
+/*
+ * The block tag: used to describe a single buffer in the journal.
+ * t_blocknr_high is only used if INCOMPAT_64BIT is set, so this
+ * raw struct shouldn't be used for pointer math or sizeof() - use
+ * journal_tag_bytes(journal) instead to compute this.
+ */
+typedef struct journal_block_tag_s
+{
+	__be32		t_blocknr;	/* The on-disk block number */
+	__be32		t_flags;	/* See below */
+	__be32		t_blocknr_high; /* most-significant high 32bits. */
+} journal_block_tag_t;
+
+#define JBD2_TAG_SIZE32 (offsetof(journal_block_tag_t, t_blocknr_high))
+#define JBD2_TAG_SIZE64 (sizeof(journal_block_tag_t))
+
+/*
+ * The revoke descriptor: used on disk to describe a series of blocks to
+ * be revoked from the log
+ */
+typedef struct jbd2_journal_revoke_header_s
+{
+	journal_header_t r_header;
+	__be32		 r_count;	/* Count of bytes used in the block */
+} jbd2_journal_revoke_header_t;
+
+
+/* Definitions for the journal tag flags word: */
+#define JBD2_FLAG_ESCAPE		1	/* on-disk block is escaped */
+#define JBD2_FLAG_SAME_UUID	2	/* block has same uuid as previous */
+#define JBD2_FLAG_DELETED	4	/* block deleted by this transaction */
+#define JBD2_FLAG_LAST_TAG	8	/* last tag in this descriptor block */
+
+
+/*
+ * The journal superblock.  All fields are in big-endian byte order.
+ */
+typedef struct journal_superblock_s
+{
+/* 0x0000 */
+	journal_header_t s_header;
+
+/* 0x000C */
+	/* Static information describing the journal */
+	__be32	s_blocksize;		/* journal device blocksize */
+	__be32	s_maxlen;		/* total blocks in journal file */
+	__be32	s_first;		/* first block of log information */
+
+/* 0x0018 */
+	/* Dynamic information describing the current state of the log */
+	__be32	s_sequence;		/* first commit ID expected in log */
+	__be32	s_start;		/* blocknr of start of log */
+
+/* 0x0020 */
+	/* Error value, as set by jbd2_journal_abort(). */
+	__be32	s_errno;
+
+/* 0x0024 */
+	/* Remaining fields are only valid in a version-2 superblock */
+	__be32	s_feature_compat;	/* compatible feature set */
+	__be32	s_feature_incompat;	/* incompatible feature set */
+	__be32	s_feature_ro_compat;	/* readonly-compatible feature set */
+/* 0x0030 */
+	__u8	s_uuid[16];		/* 128-bit uuid for journal */
+
+/* 0x0040 */
+	__be32	s_nr_users;		/* Nr of filesystems sharing log */
+
+	__be32	s_dynsuper;		/* Blocknr of dynamic superblock copy*/
+
+/* 0x0048 */
+	__be32	s_max_transaction;	/* Limit of journal blocks per trans.*/
+	__be32	s_max_trans_data;	/* Limit of data blocks per trans. */
+
+/* 0x0050 */
+	__u32	s_padding[44];
+
+/* 0x0100 */
+	__u8	s_users[16*48];		/* ids of all fs'es sharing the log */
+/* 0x0400 */
+} journal_superblock_t;
+
+#define JBD2_HAS_COMPAT_FEATURE(j,mask)					\
+	((j)->j_format_version >= 2 &&					\
+	 ((j)->j_superblock->s_feature_compat & cpu_to_be32((mask))))
+#define JBD2_HAS_RO_COMPAT_FEATURE(j,mask)				\
+	((j)->j_format_version >= 2 &&					\
+	 ((j)->j_superblock->s_feature_ro_compat & cpu_to_be32((mask))))
+#define JBD2_HAS_INCOMPAT_FEATURE(j,mask)				\
+	((j)->j_format_version >= 2 &&					\
+	 ((j)->j_superblock->s_feature_incompat & cpu_to_be32((mask))))
+
+#define JBD2_FEATURE_COMPAT_CHECKSUM	0x00000001
+
+#define JBD2_FEATURE_INCOMPAT_REVOKE		0x00000001
+#define JBD2_FEATURE_INCOMPAT_64BIT		0x00000002
+#define JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT	0x00000004
+
+/* Features known to this kernel version: */
+#define JBD2_KNOWN_COMPAT_FEATURES	JBD2_FEATURE_COMPAT_CHECKSUM
+#define JBD2_KNOWN_ROCOMPAT_FEATURES	0
+#define JBD2_KNOWN_INCOMPAT_FEATURES	(JBD2_FEATURE_INCOMPAT_REVOKE | \
+					JBD2_FEATURE_INCOMPAT_64BIT | \
+					JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT)
+
+#ifdef __KERNEL__
+
+#include <linux/fs.h>
+#include <linux/sched.h>
+#include <linux/jbd_common.h>
+
+#define J_ASSERT(assert)	BUG_ON(!(assert))
+
+#define J_ASSERT_BH(bh, expr)	J_ASSERT(expr)
+#define J_ASSERT_JH(jh, expr)	J_ASSERT(expr)
+
+#if defined(JBD2_PARANOID_IOFAIL)
+#define J_EXPECT(expr, why...)		J_ASSERT(expr)
+#define J_EXPECT_BH(bh, expr, why...)	J_ASSERT_BH(bh, expr)
+#define J_EXPECT_JH(jh, expr, why...)	J_ASSERT_JH(jh, expr)
+#else
+#define __journal_expect(expr, why...)					     \
+	({								     \
+		int val = (expr);					     \
+		if (!val) {						     \
+			printk(KERN_ERR					     \
+			       "JBD2 unexpected failure: %s: %s;\n",	     \
+			       __func__, #expr);			     \
+			printk(KERN_ERR why "\n");			     \
+		}							     \
+		val;							     \
+	})
+#define J_EXPECT(expr, why...)		__journal_expect(expr, ## why)
+#define J_EXPECT_BH(bh, expr, why...)	__journal_expect(expr, ## why)
+#define J_EXPECT_JH(jh, expr, why...)	__journal_expect(expr, ## why)
+#endif
+
+/* Flags in jbd_inode->i_flags */
+#define __JI_COMMIT_RUNNING 0
+/* Commit of the inode data in progress. We use this flag to protect us from
+ * concurrent deletion of inode. We cannot use reference to inode for this
+ * since we cannot afford doing last iput() on behalf of kjournald
+ */
+#define JI_COMMIT_RUNNING (1 << __JI_COMMIT_RUNNING)
+
+/**
+ * struct jbd_inode is the structure linking inodes in ordered mode
+ *   present in a transaction so that we can sync them during commit.
+ */
+struct jbd2_inode {
+	/* Which transaction does this inode belong to? Either the running
+	 * transaction or the committing one. [j_list_lock] */
+	transaction_t *i_transaction;
+
+	/* Pointer to the running transaction modifying inode's data in case
+	 * there is already a committing transaction touching it. [j_list_lock] */
+	transaction_t *i_next_transaction;
+
+	/* List of inodes in the i_transaction [j_list_lock] */
+	struct list_head i_list;
+
+	/* VFS inode this inode belongs to [constant during the lifetime
+	 * of the structure] */
+	struct inode *i_vfs_inode;
+
+	/* Flags of inode [j_list_lock] */
+	unsigned long i_flags;
+};
+
+struct jbd2_revoke_table_s;
+
+/**
+ * struct handle_s - The handle_s type is the concrete type associated with
+ *     handle_t.
+ * @h_transaction: Which compound transaction is this update a part of?
+ * @h_buffer_credits: Number of remaining buffers we are allowed to dirty.
+ * @h_ref: Reference count on this handle
+ * @h_err: Field for caller's use to track errors through large fs operations
+ * @h_sync: flag for sync-on-close
+ * @h_jdata: flag to force data journaling
+ * @h_aborted: flag indicating fatal error on handle
+ **/
+
+/* Docbook can't yet cope with the bit fields, but will leave the documentation
+ * in so it can be fixed later.
+ */
+
+struct jbd2_journal_handle
+{
+	/* Which compound transaction is this update a part of? */
+	transaction_t		*h_transaction;
+
+	/* Number of remaining buffers we are allowed to dirty: */
+	int			h_buffer_credits;
+
+	/* Reference count on this handle */
+	int			h_ref;
+
+	/* Field for caller's use to track errors through large fs */
+	/* operations */
+	int			h_err;
+
+	/* Flags [no locking] */
+	unsigned int	h_sync:1;	/* sync-on-close */
+	unsigned int	h_jdata:1;	/* force data journaling */
+	unsigned int	h_aborted:1;	/* fatal error on handle */
+	unsigned int	h_cowing:1;	/* COWing block to snapshot */
+
+	/* Number of buffers requested by user:
+	 * (before adding the COW credits factor) */
+	unsigned int	h_base_credits:14;
+
+	/* Number of buffers the user is allowed to dirty:
+	 * (counts only buffers dirtied when !h_cowing) */
+	unsigned int	h_user_credits:14;
+
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	struct lockdep_map	h_lockdep_map;
+#endif
+
+#ifdef CONFIG_JBD2_DEBUG
+	/* COW debugging counters: */
+	unsigned int h_cow_moved; /* blocks moved to snapshot */
+	unsigned int h_cow_copied; /* blocks copied to snapshot */
+	unsigned int h_cow_ok_jh; /* blocks already COWed during current
+				     transaction */
+	unsigned int h_cow_ok_bitmap; /* blocks not set in COW bitmap */
+	unsigned int h_cow_ok_mapped;/* blocks already mapped in snapshot */
+	unsigned int h_cow_bitmaps; /* COW bitmaps created */
+	unsigned int h_cow_excluded; /* blocks set in exclude bitmap */
+#endif
+};
+
+
+/*
+ * Some stats for checkpoint phase
+ */
+struct transaction_chp_stats_s {
+	unsigned long		cs_chp_time;
+	__u32			cs_forced_to_close;
+	__u32			cs_written;
+	__u32			cs_dropped;
+};
+
+/* The transaction_t type is the guts of the journaling mechanism.  It
+ * tracks a compound transaction through its various states:
+ *
+ * RUNNING:	accepting new updates
+ * LOCKED:	Updates still running but we don't accept new ones
+ * RUNDOWN:	Updates are tidying up but have finished requesting
+ *		new buffers to modify (state not used for now)
+ * FLUSH:       All updates complete, but we are still writing to disk
+ * COMMIT:      All data on disk, writing commit record
+ * FINISHED:	We still have to keep the transaction for checkpointing.
+ *
+ * The transaction keeps track of all of the buffers modified by a
+ * running transaction, and all of the buffers committed but not yet
+ * flushed to home for finished transactions.
+ */
+
+/*
+ * Lock ranking:
+ *
+ *    j_list_lock
+ *      ->jbd_lock_bh_journal_head()	(This is "innermost")
+ *
+ *    j_state_lock
+ *    ->jbd_lock_bh_state()
+ *
+ *    jbd_lock_bh_state()
+ *    ->j_list_lock
+ *
+ *    j_state_lock
+ *    ->t_handle_lock
+ *
+ *    j_state_lock
+ *    ->j_list_lock			(journal_unmap_buffer)
+ *
+ */
+
+struct transaction_s
+{
+	/* Pointer to the journal for this transaction. [no locking] */
+	journal_t		*t_journal;
+
+	/* Sequence number for this transaction [no locking] */
+	tid_t			t_tid;
+
+	/*
+	 * Transaction's current state
+	 * [no locking - only kjournald2 alters this]
+	 * [j_list_lock] guards transition of a transaction into T_FINISHED
+	 * state and subsequent call of __jbd2_journal_drop_transaction()
+	 * FIXME: needs barriers
+	 * KLUDGE: [use j_state_lock]
+	 */
+	enum {
+		T_RUNNING,
+		T_LOCKED,
+		T_FLUSH,
+		T_COMMIT,
+		T_COMMIT_DFLUSH,
+		T_COMMIT_JFLUSH,
+		T_FINISHED
+	}			t_state;
+
+	/*
+	 * Where in the log does this transaction's commit start? [no locking]
+	 */
+	unsigned long		t_log_start;
+
+	/* Number of buffers on the t_buffers list [j_list_lock] */
+	int			t_nr_buffers;
+
+	/*
+	 * Doubly-linked circular list of all buffers reserved but not yet
+	 * modified by this transaction [j_list_lock]
+	 */
+	struct journal_head	*t_reserved_list;
+
+	/*
+	 * Doubly-linked circular list of all metadata buffers owned by this
+	 * transaction [j_list_lock]
+	 */
+	struct journal_head	*t_buffers;
+
+	/*
+	 * Doubly-linked circular list of all forget buffers (superseded
+	 * buffers which we can un-checkpoint once this transaction commits)
+	 * [j_list_lock]
+	 */
+	struct journal_head	*t_forget;
+
+	/*
+	 * Doubly-linked circular list of all buffers still to be flushed before
+	 * this transaction can be checkpointed. [j_list_lock]
+	 */
+	struct journal_head	*t_checkpoint_list;
+
+	/*
+	 * Doubly-linked circular list of all buffers submitted for IO while
+	 * checkpointing. [j_list_lock]
+	 */
+	struct journal_head	*t_checkpoint_io_list;
+
+	/*
+	 * Doubly-linked circular list of temporary buffers currently undergoing
+	 * IO in the log [j_list_lock]
+	 */
+	struct journal_head	*t_iobuf_list;
+
+	/*
+	 * Doubly-linked circular list of metadata buffers being shadowed by log
+	 * IO.  The IO buffers on the iobuf list and the shadow buffers on this
+	 * list match each other one for one at all times. [j_list_lock]
+	 */
+	struct journal_head	*t_shadow_list;
+
+	/*
+	 * Doubly-linked circular list of control buffers being written to the
+	 * log. [j_list_lock]
+	 */
+	struct journal_head	*t_log_list;
+
+	/*
+	 * List of inodes whose data we've modified in data=ordered mode.
+	 * [j_list_lock]
+	 */
+	struct list_head	t_inode_list;
+
+	/*
+	 * Protects info related to handles
+	 */
+	spinlock_t		t_handle_lock;
+
+	/*
+	 * Longest time some handle had to wait for running transaction
+	 */
+	unsigned long		t_max_wait;
+
+	/*
+	 * When transaction started
+	 */
+	unsigned long		t_start;
+
+	/*
+	 * Checkpointing stats [j_checkpoint_sem]
+	 */
+	struct transaction_chp_stats_s t_chp_stats;
+
+	/*
+	 * Number of outstanding updates running on this transaction
+	 * [t_handle_lock]
+	 */
+	atomic_t		t_updates;
+
+	/*
+	 * Number of buffers reserved for use by all handles in this transaction
+	 * handle but not yet modified. [t_handle_lock]
+	 */
+	atomic_t		t_outstanding_credits;
+
+	/*
+	 * Forward and backward links for the circular list of all transactions
+	 * awaiting checkpoint. [j_list_lock]
+	 */
+	transaction_t		*t_cpnext, *t_cpprev;
+
+	/*
+	 * When will the transaction expire (become due for commit), in jiffies?
+	 * [no locking]
+	 */
+	unsigned long		t_expires;
+
+	/*
+	 * When this transaction started, in nanoseconds [no locking]
+	 */
+	ktime_t			t_start_time;
+
+	/*
+	 * How many handles used this transaction? [t_handle_lock]
+	 */
+	atomic_t		t_handle_count;
+
+	/*
+	 * This transaction is being forced and some process is
+	 * waiting for it to finish.
+	 */
+	unsigned int t_synchronous_commit:1;
+
+	/* Disk flush needs to be sent to fs partition [no locking] */
+	int			t_need_data_flush;
+
+	/*
+	 * For use by the filesystem to store fs-specific data
+	 * structures associated with the transaction
+	 */
+	struct list_head	t_private_list;
+};
+
+struct transaction_run_stats_s {
+	unsigned long		rs_wait;
+	unsigned long		rs_running;
+	unsigned long		rs_locked;
+	unsigned long		rs_flushing;
+	unsigned long		rs_logging;
+
+	__u32			rs_handle_count;
+	__u32			rs_blocks;
+	__u32			rs_blocks_logged;
+};
+
+struct transaction_stats_s {
+	unsigned long		ts_tid;
+	struct transaction_run_stats_s run;
+};
+
+static inline unsigned long
+jbd2_time_diff(unsigned long start, unsigned long end)
+{
+	if (end >= start)
+		return end - start;
+
+	return end + (MAX_JIFFY_OFFSET - start);
+}
+
+#define JBD2_NR_BATCH	64
+
+/**
+ * struct journal_s - The journal_s type is the concrete type associated with
+ *     journal_t.
+ * @j_flags:  General journaling state flags
+ * @j_errno:  Is there an outstanding uncleared error on the journal (from a
+ *     prior abort)?
+ * @j_sb_buffer: First part of superblock buffer
+ * @j_superblock: Second part of superblock buffer
+ * @j_format_version: Version of the superblock format
+ * @j_state_lock: Protect the various scalars in the journal
+ * @j_barrier_count:  Number of processes waiting to create a barrier lock
+ * @j_barrier: The barrier lock itself
+ * @j_running_transaction: The current running transaction..
+ * @j_committing_transaction: the transaction we are pushing to disk
+ * @j_checkpoint_transactions: a linked circular list of all transactions
+ *  waiting for checkpointing
+ * @j_wait_transaction_locked: Wait queue for waiting for a locked transaction
+ *  to start committing, or for a barrier lock to be released
+ * @j_wait_logspace: Wait queue for waiting for checkpointing to complete
+ * @j_wait_done_commit: Wait queue for waiting for commit to complete
+ * @j_wait_checkpoint:  Wait queue to trigger checkpointing
+ * @j_wait_commit: Wait queue to trigger commit
+ * @j_wait_updates: Wait queue to wait for updates to complete
+ * @j_checkpoint_mutex: Mutex for locking against concurrent checkpoints
+ * @j_head: Journal head - identifies the first unused block in the journal
+ * @j_tail: Journal tail - identifies the oldest still-used block in the
+ *  journal.
+ * @j_free: Journal free - how many free blocks are there in the journal?
+ * @j_first: The block number of the first usable block
+ * @j_last: The block number one beyond the last usable block
+ * @j_dev: Device where we store the journal
+ * @j_blocksize: blocksize for the location where we store the journal.
+ * @j_blk_offset: starting block offset for into the device where we store the
+ *     journal
+ * @j_fs_dev: Device which holds the client fs.  For internal journal this will
+ *     be equal to j_dev
+ * @j_maxlen: Total maximum capacity of the journal region on disk.
+ * @j_list_lock: Protects the buffer lists and internal buffer state.
+ * @j_inode: Optional inode where we store the journal.  If present, all journal
+ *     block numbers are mapped into this inode via bmap().
+ * @j_tail_sequence:  Sequence number of the oldest transaction in the log
+ * @j_transaction_sequence: Sequence number of the next transaction to grant
+ * @j_commit_sequence: Sequence number of the most recently committed
+ *  transaction
+ * @j_commit_request: Sequence number of the most recent transaction wanting
+ *     commit
+ * @j_uuid: Uuid of client object.
+ * @j_task: Pointer to the current commit thread for this journal
+ * @j_max_transaction_buffers:  Maximum number of metadata buffers to allow in a
+ *     single compound commit transaction
+ * @j_commit_interval: What is the maximum transaction lifetime before we begin
+ *  a commit?
+ * @j_commit_timer:  The timer used to wakeup the commit thread
+ * @j_revoke_lock: Protect the revoke table
+ * @j_revoke: The revoke table - maintains the list of revoked blocks in the
+ *     current transaction.
+ * @j_revoke_table: alternate revoke tables for j_revoke
+ * @j_wbuf: array of buffer_heads for jbd2_journal_commit_transaction
+ * @j_wbufsize: maximum number of buffer_heads allowed in j_wbuf, the
+ *	number that will fit in j_blocksize
+ * @j_last_sync_writer: most recent pid which did a synchronous write
+ * @j_history: Buffer storing the transactions statistics history
+ * @j_history_max: Maximum number of transactions in the statistics history
+ * @j_history_cur: Current number of transactions in the statistics history
+ * @j_history_lock: Protect the transactions statistics history
+ * @j_proc_entry: procfs entry for the jbd statistics directory
+ * @j_stats: Overall statistics
+ * @j_private: An opaque pointer to fs-private information.
+ */
+
+struct journal_s
+{
+	/* General journaling state flags [j_state_lock] */
+	unsigned long		j_flags;
+
+	/*
+	 * Is there an outstanding uncleared error on the journal (from a prior
+	 * abort)? [j_state_lock]
+	 */
+	int			j_errno;
+
+	/* The superblock buffer */
+	struct buffer_head	*j_sb_buffer;
+	journal_superblock_t	*j_superblock;
+
+	/* Version of the superblock format */
+	int			j_format_version;
+
+	/*
+	 * Protect the various scalars in the journal
+	 */
+	rwlock_t		j_state_lock;
+
+	/*
+	 * Number of processes waiting to create a barrier lock [j_state_lock]
+	 */
+	int			j_barrier_count;
+
+	/* The barrier lock itself */
+	struct mutex		j_barrier;
+
+	/*
+	 * Transactions: The current running transaction...
+	 * [j_state_lock] [caller holding open handle]
+	 */
+	transaction_t		*j_running_transaction;
+
+	/*
+	 * the transaction we are pushing to disk
+	 * [j_state_lock] [caller holding open handle]
+	 */
+	transaction_t		*j_committing_transaction;
+
+	/*
+	 * ... and a linked circular list of all transactions waiting for
+	 * checkpointing. [j_list_lock]
+	 */
+	transaction_t		*j_checkpoint_transactions;
+
+	/*
+	 * Wait queue for waiting for a locked transaction to start committing,
+	 * or for a barrier lock to be released
+	 */
+	wait_queue_head_t	j_wait_transaction_locked;
+
+	/* Wait queue for waiting for checkpointing to complete */
+	wait_queue_head_t	j_wait_logspace;
+
+	/* Wait queue for waiting for commit to complete */
+	wait_queue_head_t	j_wait_done_commit;
+
+	/* Wait queue to trigger checkpointing */
+	wait_queue_head_t	j_wait_checkpoint;
+
+	/* Wait queue to trigger commit */
+	wait_queue_head_t	j_wait_commit;
+
+	/* Wait queue to wait for updates to complete */
+	wait_queue_head_t	j_wait_updates;
+
+	/* Semaphore for locking against concurrent checkpoints */
+	struct mutex		j_checkpoint_mutex;
+
+	/*
+	 * List of buffer heads used by the checkpoint routine.  This
+	 * was moved from jbd2_log_do_checkpoint() to reduce stack
+	 * usage.  Access to this array is controlled by the
+	 * j_checkpoint_mutex.  [j_checkpoint_mutex]
+	 */
+	struct buffer_head	*j_chkpt_bhs[JBD2_NR_BATCH];
+	
+	/*
+	 * Journal head: identifies the first unused block in the journal.
+	 * [j_state_lock]
+	 */
+	unsigned long		j_head;
+
+	/*
+	 * Journal tail: identifies the oldest still-used block in the journal.
+	 * [j_state_lock]
+	 */
+	unsigned long		j_tail;
+
+	/*
+	 * Journal free: how many free blocks are there in the journal?
+	 * [j_state_lock]
+	 */
+	unsigned long		j_free;
+
+	/*
+	 * Journal start and end: the block numbers of the first usable block
+	 * and one beyond the last usable block in the journal. [j_state_lock]
+	 */
+	unsigned long		j_first;
+	unsigned long		j_last;
+
+	/*
+	 * Device, blocksize and starting block offset for the location where we
+	 * store the journal.
+	 */
+	struct block_device	*j_dev;
+	int			j_blocksize;
+	unsigned long long	j_blk_offset;
+	char			j_devname[BDEVNAME_SIZE+24];
+
+	/*
+	 * Device which holds the client fs.  For internal journal this will be
+	 * equal to j_dev.
+	 */
+	struct block_device	*j_fs_dev;
+
+	/* Total maximum capacity of the journal region on disk. */
+	unsigned int		j_maxlen;
+
+	/*
+	 * Protects the buffer lists and internal buffer state.
+	 */
+	spinlock_t		j_list_lock;
+
+	/* Optional inode where we store the journal.  If present, all */
+	/* journal block numbers are mapped into this inode via */
+	/* bmap(). */
+	struct inode		*j_inode;
+
+	/*
+	 * Sequence number of the oldest transaction in the log [j_state_lock]
+	 */
+	tid_t			j_tail_sequence;
+
+	/*
+	 * Sequence number of the next transaction to grant [j_state_lock]
+	 */
+	tid_t			j_transaction_sequence;
+
+	/*
+	 * Sequence number of the most recently committed transaction
+	 * [j_state_lock].
+	 */
+	tid_t			j_commit_sequence;
+
+	/*
+	 * Sequence number of the most recent transaction wanting commit
+	 * [j_state_lock]
+	 */
+	tid_t			j_commit_request;
+
+	/*
+	 * Journal uuid: identifies the object (filesystem, LVM volume etc)
+	 * backed by this journal.  This will eventually be replaced by an array
+	 * of uuids, allowing us to index multiple devices within a single
+	 * journal and to perform atomic updates across them.
+	 */
+	__u8			j_uuid[16];
+
+	/* Pointer to the current commit thread for this journal */
+	struct task_struct	*j_task;
+
+	/*
+	 * Maximum number of metadata buffers to allow in a single compound
+	 * commit transaction
+	 */
+	int			j_max_transaction_buffers;
+
+	/*
+	 * What is the maximum transaction lifetime before we begin a commit?
+	 */
+	unsigned long		j_commit_interval;
+
+	/* The timer used to wakeup the commit thread: */
+	struct timer_list	j_commit_timer;
+
+	/*
+	 * The revoke table: maintains the list of revoked blocks in the
+	 * current transaction.  [j_revoke_lock]
+	 */
+	spinlock_t		j_revoke_lock;
+	struct jbd2_revoke_table_s *j_revoke;
+	struct jbd2_revoke_table_s *j_revoke_table[2];
+
+	/*
+	 * array of bhs for jbd2_journal_commit_transaction
+	 */
+	struct buffer_head	**j_wbuf;
+	int			j_wbufsize;
+
+	/*
+	 * this is the pid of hte last person to run a synchronous operation
+	 * through the journal
+	 */
+	pid_t			j_last_sync_writer;
+
+	/*
+	 * the average amount of time in nanoseconds it takes to commit a
+	 * transaction to disk. [j_state_lock]
+	 */
+	u64			j_average_commit_time;
+
+	/*
+	 * minimum and maximum times that we should wait for
+	 * additional filesystem operations to get batched into a
+	 * synchronous handle in microseconds
+	 */
+	u32			j_min_batch_time;
+	u32			j_max_batch_time;
+
+	/* This function is called when a transaction is closed */
+	void			(*j_commit_callback)(journal_t *,
+						     transaction_t *);
+
+	/*
+	 * Journal statistics
+	 */
+	spinlock_t		j_history_lock;
+	struct proc_dir_entry	*j_proc_entry;
+	struct transaction_stats_s j_stats;
+
+	/* Failed journal commit ID */
+	unsigned int		j_failed_commit;
+
+	/*
+	 * An opaque pointer to fs-private information.  ext3 puts its
+	 * superblock pointer here
+	 */
+	void *j_private;
+};
+
+/*
+ * Journal flag definitions
+ */
+#define JBD2_UNMOUNT	0x001	/* Journal thread is being destroyed */
+#define JBD2_ABORT	0x002	/* Journaling has been aborted for errors. */
+#define JBD2_ACK_ERR	0x004	/* The errno in the sb has been acked */
+#define JBD2_FLUSHED	0x008	/* The journal superblock has been flushed */
+#define JBD2_LOADED	0x010	/* The journal superblock has been loaded */
+#define JBD2_BARRIER	0x020	/* Use IDE barriers */
+#define JBD2_ABORT_ON_SYNCDATA_ERR	0x040	/* Abort the journal on file
+						 * data write error in ordered
+						 * mode */
+
+/*
+ * Function declarations for the journaling transaction and buffer
+ * management
+ */
+
+/* Filing buffers */
+extern void jbd2_journal_unfile_buffer(journal_t *, struct journal_head *);
+extern void __jbd2_journal_refile_buffer(struct journal_head *);
+extern void jbd2_journal_refile_buffer(journal_t *, struct journal_head *);
+extern void __jbd2_journal_file_buffer(struct journal_head *, transaction_t *, int);
+extern void __journal_free_buffer(struct journal_head *bh);
+extern void jbd2_journal_file_buffer(struct journal_head *, transaction_t *, int);
+extern void __journal_clean_data_list(transaction_t *transaction);
+
+/* Log buffer allocation */
+extern struct journal_head * jbd2_journal_get_descriptor_buffer(journal_t *);
+int jbd2_journal_next_log_block(journal_t *, unsigned long long *);
+int jbd2_journal_get_log_tail(journal_t *journal, tid_t *tid,
+			      unsigned long *block);
+void __jbd2_update_log_tail(journal_t *journal, tid_t tid, unsigned long block);
+void jbd2_update_log_tail(journal_t *journal, tid_t tid, unsigned long block);
+
+/* Commit management */
+extern void jbd2_journal_commit_transaction(journal_t *);
+
+/* Checkpoint list management */
+int __jbd2_journal_clean_checkpoint_list(journal_t *journal);
+int __jbd2_journal_remove_checkpoint(struct journal_head *);
+void __jbd2_journal_insert_checkpoint(struct journal_head *, transaction_t *);
+
+
+/*
+ * Triggers
+ */
+
+struct jbd2_buffer_trigger_type {
+	/*
+	 * Fired a the moment data to write to the journal are known to be
+	 * stable - so either at the moment b_frozen_data is created or just
+	 * before a buffer is written to the journal.  mapped_data is a mapped
+	 * buffer that is the frozen data for commit.
+	 */
+	void (*t_frozen)(struct jbd2_buffer_trigger_type *type,
+			 struct buffer_head *bh, void *mapped_data,
+			 size_t size);
+
+	/*
+	 * Fired during journal abort for dirty buffers that will not be
+	 * committed.
+	 */
+	void (*t_abort)(struct jbd2_buffer_trigger_type *type,
+			struct buffer_head *bh);
+};
+
+extern void jbd2_buffer_frozen_trigger(struct journal_head *jh,
+				       void *mapped_data,
+				       struct jbd2_buffer_trigger_type *triggers);
+extern void jbd2_buffer_abort_trigger(struct journal_head *jh,
+				      struct jbd2_buffer_trigger_type *triggers);
+
+/* Buffer IO */
+extern int
+jbd2_journal_write_metadata_buffer(transaction_t	  *transaction,
+			      struct journal_head  *jh_in,
+			      struct journal_head **jh_out,
+			      unsigned long long   blocknr);
+
+/* Transaction locking */
+extern void		__wait_on_journal (journal_t *);
+
+/* Transaction cache support */
+extern void jbd2_journal_destroy_transaction_cache(void);
+extern int  jbd2_journal_init_transaction_cache(void);
+extern void jbd2_journal_free_transaction(transaction_t *);
+
+/*
+ * Journal locking.
+ *
+ * We need to lock the journal during transaction state changes so that nobody
+ * ever tries to take a handle on the running transaction while we are in the
+ * middle of moving it to the commit phase.  j_state_lock does this.
+ *
+ * Note that the locking is completely interrupt unsafe.  We never touch
+ * journal structures from interrupts.
+ */
+
+static inline handle_t *journal_current_handle(void)
+{
+	return current->journal_info;
+}
+
+/* The journaling code user interface:
+ *
+ * Create and destroy handles
+ * Register buffer modifications against the current transaction.
+ */
+
+extern handle_t *jbd2_journal_start(journal_t *, int nblocks);
+extern handle_t *jbd2__journal_start(journal_t *, int nblocks, gfp_t gfp_mask);
+extern int	 jbd2_journal_restart(handle_t *, int nblocks);
+extern int	 jbd2__journal_restart(handle_t *, int nblocks, gfp_t gfp_mask);
+extern int	 jbd2_journal_extend (handle_t *, int nblocks);
+extern int	 jbd2_journal_get_write_access(handle_t *, struct buffer_head *);
+extern int	 jbd2_journal_get_create_access (handle_t *, struct buffer_head *);
+extern int	 jbd2_journal_get_undo_access(handle_t *, struct buffer_head *);
+void		 jbd2_journal_set_triggers(struct buffer_head *,
+					   struct jbd2_buffer_trigger_type *type);
+extern int	 jbd2_journal_dirty_metadata (handle_t *, struct buffer_head *);
+extern void	 jbd2_journal_release_buffer (handle_t *, struct buffer_head *);
+extern int	 jbd2_journal_forget (handle_t *, struct buffer_head *);
+extern void	 journal_sync_buffer (struct buffer_head *);
+extern void	 jbd2_journal_invalidatepage(journal_t *,
+				struct page *, unsigned long);
+extern int	 jbd2_journal_try_to_free_buffers(journal_t *, struct page *, gfp_t);
+extern int	 jbd2_journal_stop(handle_t *);
+extern int	 jbd2_journal_flush (journal_t *);
+extern void	 jbd2_journal_lock_updates (journal_t *);
+extern void	 jbd2_journal_unlock_updates (journal_t *);
+
+extern journal_t * jbd2_journal_init_dev(struct block_device *bdev,
+				struct block_device *fs_dev,
+				unsigned long long start, int len, int bsize);
+extern journal_t * jbd2_journal_init_inode (struct inode *);
+extern int	   jbd2_journal_update_format (journal_t *);
+extern int	   jbd2_journal_check_used_features
+		   (journal_t *, unsigned long, unsigned long, unsigned long);
+extern int	   jbd2_journal_check_available_features
+		   (journal_t *, unsigned long, unsigned long, unsigned long);
+extern int	   jbd2_journal_set_features
+		   (journal_t *, unsigned long, unsigned long, unsigned long);
+extern void	   jbd2_journal_clear_features
+		   (journal_t *, unsigned long, unsigned long, unsigned long);
+extern int	   jbd2_journal_load       (journal_t *journal);
+extern int	   jbd2_journal_destroy    (journal_t *);
+extern int	   jbd2_journal_recover    (journal_t *journal);
+extern int	   jbd2_journal_wipe       (journal_t *, int);
+extern int	   jbd2_journal_skip_recovery	(journal_t *);
+extern void	   jbd2_journal_update_sb_log_tail	(journal_t *, tid_t,
+				unsigned long, int);
+extern void	   __jbd2_journal_abort_hard	(journal_t *);
+extern void	   jbd2_journal_abort      (journal_t *, int);
+extern int	   jbd2_journal_errno      (journal_t *);
+extern void	   jbd2_journal_ack_err    (journal_t *);
+extern int	   jbd2_journal_clear_err  (journal_t *);
+extern int	   jbd2_journal_bmap(journal_t *, unsigned long, unsigned long long *);
+extern int	   jbd2_journal_force_commit(journal_t *);
+extern int	   jbd2_journal_file_inode(handle_t *handle, struct jbd2_inode *inode);
+extern int	   jbd2_journal_begin_ordered_truncate(journal_t *journal,
+				struct jbd2_inode *inode, loff_t new_size);
+extern void	   jbd2_journal_init_jbd_inode(struct jbd2_inode *jinode, struct inode *inode);
+extern void	   jbd2_journal_release_jbd_inode(journal_t *journal, struct jbd2_inode *jinode);
+
+/*
+ * journal_head management
+ */
+struct journal_head *jbd2_journal_add_journal_head(struct buffer_head *bh);
+struct journal_head *jbd2_journal_grab_journal_head(struct buffer_head *bh);
+void jbd2_journal_put_journal_head(struct journal_head *jh);
+
+/*
+ * handle management
+ */
+extern struct kmem_cache *jbd2_handle_cache;
+
+static inline handle_t *jbd2_alloc_handle(gfp_t gfp_flags)
+{
+	return kmem_cache_alloc(jbd2_handle_cache, gfp_flags);
+}
+
+static inline void jbd2_free_handle(handle_t *handle)
+{
+	kmem_cache_free(jbd2_handle_cache, handle);
+}
+
+/*
+ * jbd2_inode management (optional, for those file systems that want to use
+ * dynamically allocated jbd2_inode structures)
+ */
+extern struct kmem_cache *jbd2_inode_cache;
+
+static inline struct jbd2_inode *jbd2_alloc_inode(gfp_t gfp_flags)
+{
+	return kmem_cache_alloc(jbd2_inode_cache, gfp_flags);
+}
+
+static inline void jbd2_free_inode(struct jbd2_inode *jinode)
+{
+	kmem_cache_free(jbd2_inode_cache, jinode);
+}
+
+/* Primary revoke support */
+#define JOURNAL_REVOKE_DEFAULT_HASH 256
+extern int	   jbd2_journal_init_revoke(journal_t *, int);
+extern void	   jbd2_journal_destroy_revoke_caches(void);
+extern int	   jbd2_journal_init_revoke_caches(void);
+
+extern void	   jbd2_journal_destroy_revoke(journal_t *);
+extern int	   jbd2_journal_revoke (handle_t *, unsigned long long, struct buffer_head *);
+extern int	   jbd2_journal_cancel_revoke(handle_t *, struct journal_head *);
+extern void	   jbd2_journal_write_revoke_records(journal_t *,
+						     transaction_t *, int);
+
+/* Recovery revoke support */
+extern int	jbd2_journal_set_revoke(journal_t *, unsigned long long, tid_t);
+extern int	jbd2_journal_test_revoke(journal_t *, unsigned long long, tid_t);
+extern void	jbd2_journal_clear_revoke(journal_t *);
+extern void	jbd2_journal_switch_revoke_table(journal_t *journal);
+extern void	jbd2_clear_buffer_revoked_flags(journal_t *journal);
+
+/*
+ * The log thread user interface:
+ *
+ * Request space in the current transaction, and force transaction commit
+ * transitions on demand.
+ */
+
+int __jbd2_log_space_left(journal_t *); /* Called with journal locked */
+int jbd2_log_start_commit(journal_t *journal, tid_t tid);
+int __jbd2_log_start_commit(journal_t *journal, tid_t tid);
+int jbd2_journal_start_commit(journal_t *journal, tid_t *tid);
+int jbd2_journal_force_commit_nested(journal_t *journal);
+int jbd2_log_wait_commit(journal_t *journal, tid_t tid);
+int jbd2_log_do_checkpoint(journal_t *journal);
+int jbd2_trans_will_send_data_barrier(journal_t *journal, tid_t tid);
+
+void __jbd2_log_wait_for_space(journal_t *journal);
+extern void __jbd2_journal_drop_transaction(journal_t *, transaction_t *);
+extern int jbd2_cleanup_journal_tail(journal_t *);
+
+/* Debugging code only: */
+
+#define jbd_ENOSYS() \
+do {								           \
+	printk (KERN_ERR "JBD unimplemented function %s\n", __func__); \
+	current->state = TASK_UNINTERRUPTIBLE;			           \
+	schedule();						           \
+} while (1)
+
+/*
+ * is_journal_abort
+ *
+ * Simple test wrapper function to test the JBD2_ABORT state flag.  This
+ * bit, when set, indicates that we have had a fatal error somewhere,
+ * either inside the journaling layer or indicated to us by the client
+ * (eg. ext3), and that we and should not commit any further
+ * transactions.
+ */
+
+static inline int is_journal_aborted(journal_t *journal)
+{
+	return journal->j_flags & JBD2_ABORT;
+}
+
+static inline int is_handle_aborted(handle_t *handle)
+{
+	if (handle->h_aborted)
+		return 1;
+	return is_journal_aborted(handle->h_transaction->t_journal);
+}
+
+static inline void jbd2_journal_abort_handle(handle_t *handle)
+{
+	handle->h_aborted = 1;
+}
+
+#endif /* __KERNEL__   */
+
+/* Comparison functions for transaction IDs: perform comparisons using
+ * modulo arithmetic so that they work over sequence number wraps. */
+
+static inline int tid_gt(tid_t x, tid_t y)
+{
+	int difference = (x - y);
+	return (difference > 0);
+}
+
+static inline int tid_geq(tid_t x, tid_t y)
+{
+	int difference = (x - y);
+	return (difference >= 0);
+}
+
+extern int jbd2_journal_blocks_per_page(struct inode *inode);
+extern size_t journal_tag_bytes(journal_t *journal);
+
+/*
+ * Return the minimum number of blocks which must be free in the journal
+ * before a new transaction may be started.  Must be called under j_state_lock.
+ */
+static inline int jbd_space_needed(journal_t *journal)
+{
+	int nblocks = journal->j_max_transaction_buffers;
+	if (journal->j_committing_transaction)
+		nblocks += atomic_read(&journal->j_committing_transaction->
+				       t_outstanding_credits);
+	return nblocks;
+}
+
+/*
+ * Definitions which augment the buffer_head layer
+ */
+
+/* journaling buffer types */
+#define BJ_None		0	/* Not journaled */
+#define BJ_Metadata	1	/* Normal journaled metadata */
+#define BJ_Forget	2	/* Buffer superseded by this transaction */
+#define BJ_IO		3	/* Buffer is for temporary IO use */
+#define BJ_Shadow	4	/* Buffer contents being shadowed to the log */
+#define BJ_LogCtl	5	/* Buffer contains log descriptors */
+#define BJ_Reserved	6	/* Buffer is reserved for access by journal */
+#define BJ_Types	7
+
+extern int jbd_blocks_per_page(struct inode *inode);
+
+#ifdef __KERNEL__
+
+#define buffer_trace_init(bh)	do {} while (0)
+#define print_buffer_fields(bh)	do {} while (0)
+#define print_buffer_trace(bh)	do {} while (0)
+#define BUFFER_TRACE(bh, info)	do {} while (0)
+#define BUFFER_TRACE2(bh, bh2, info)	do {} while (0)
+#define JBUFFER_TRACE(jh, info)	do {} while (0)
+
+#endif	/* __KERNEL__ */
+
+#endif	/* _LINUX_JBD2_H */
diff --git a/include/linux/jbd_common.h b/include/linux/jbd_common.h
new file mode 100644
index 00000000..6230f855
--- /dev/null
+++ b/include/linux/jbd_common.h
@@ -0,0 +1,68 @@
+#ifndef _LINUX_JBD_STATE_H
+#define _LINUX_JBD_STATE_H
+
+enum jbd_state_bits {
+	BH_JBD			/* Has an attached ext3 journal_head */
+	  = BH_PrivateStart,
+	BH_JWrite,		/* Being written to log (@@@ DEBUGGING) */
+	BH_Freed,		/* Has been freed (truncated) */
+	BH_Revoked,		/* Has been revoked from the log */
+	BH_RevokeValid,		/* Revoked flag is valid */
+	BH_JBDDirty,		/* Is dirty but journaled */
+	BH_State,		/* Pins most journal_head state */
+	BH_JournalHead,		/* Pins bh->b_private and jh->b_bh */
+	BH_Unshadow,		/* Dummy bit, for BJ_Shadow wakeup filtering */
+	BH_JBDPrivateStart,	/* First bit available for private use by FS */
+};
+
+BUFFER_FNS(JBD, jbd)
+BUFFER_FNS(JWrite, jwrite)
+BUFFER_FNS(JBDDirty, jbddirty)
+TAS_BUFFER_FNS(JBDDirty, jbddirty)
+BUFFER_FNS(Revoked, revoked)
+TAS_BUFFER_FNS(Revoked, revoked)
+BUFFER_FNS(RevokeValid, revokevalid)
+TAS_BUFFER_FNS(RevokeValid, revokevalid)
+BUFFER_FNS(Freed, freed)
+
+static inline struct buffer_head *jh2bh(struct journal_head *jh)
+{
+	return jh->b_bh;
+}
+
+static inline struct journal_head *bh2jh(struct buffer_head *bh)
+{
+	return bh->b_private;
+}
+
+static inline void jbd_lock_bh_state(struct buffer_head *bh)
+{
+	bit_spin_lock(BH_State, &bh->b_state);
+}
+
+static inline int jbd_trylock_bh_state(struct buffer_head *bh)
+{
+	return bit_spin_trylock(BH_State, &bh->b_state);
+}
+
+static inline int jbd_is_locked_bh_state(struct buffer_head *bh)
+{
+	return bit_spin_is_locked(BH_State, &bh->b_state);
+}
+
+static inline void jbd_unlock_bh_state(struct buffer_head *bh)
+{
+	bit_spin_unlock(BH_State, &bh->b_state);
+}
+
+static inline void jbd_lock_bh_journal_head(struct buffer_head *bh)
+{
+	bit_spin_lock(BH_JournalHead, &bh->b_state);
+}
+
+static inline void jbd_unlock_bh_journal_head(struct buffer_head *bh)
+{
+	bit_spin_unlock(BH_JournalHead, &bh->b_state);
+}
+
+#endif
diff --git a/include/linux/jffs2.h b/include/linux/jffs2.h
new file mode 100644
index 00000000..a18b719f
--- /dev/null
+++ b/include/linux/jffs2.h
@@ -0,0 +1,223 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * Created by David Woodhouse <dwmw2@infradead.org>
+ *
+ * For licensing information, see the file 'LICENCE' in the
+ * jffs2 directory.
+ */
+
+#ifndef __LINUX_JFFS2_H__
+#define __LINUX_JFFS2_H__
+
+#include <linux/types.h>
+#include <linux/magic.h>
+
+/* You must include something which defines the C99 uintXX_t types. 
+   We don't do it from here because this file is used in too many
+   different environments. */
+
+/* Values we may expect to find in the 'magic' field */
+#define JFFS2_OLD_MAGIC_BITMASK 0x1984
+#define JFFS2_MAGIC_BITMASK 0x1985
+#define KSAMTIB_CIGAM_2SFFJ 0x8519 /* For detecting wrong-endian fs */
+#define JFFS2_EMPTY_BITMASK 0xffff
+#define JFFS2_DIRTY_BITMASK 0x0000
+
+/* Summary node MAGIC marker */
+#define JFFS2_SUM_MAGIC	0x02851885
+
+/* We only allow a single char for length, and 0xFF is empty flash so
+   we don't want it confused with a real length. Hence max 254.
+*/
+#define JFFS2_MAX_NAME_LEN 254
+
+/* How small can we sensibly write nodes? */
+#define JFFS2_MIN_DATA_LEN 128
+
+#define JFFS2_COMPR_NONE	0x00
+#define JFFS2_COMPR_ZERO	0x01
+#define JFFS2_COMPR_RTIME	0x02
+#define JFFS2_COMPR_RUBINMIPS	0x03
+#define JFFS2_COMPR_COPY	0x04
+#define JFFS2_COMPR_DYNRUBIN	0x05
+#define JFFS2_COMPR_ZLIB	0x06
+#define JFFS2_COMPR_LZO		0x07
+/* Compatibility flags. */
+#define JFFS2_COMPAT_MASK 0xc000      /* What do to if an unknown nodetype is found */
+#define JFFS2_NODE_ACCURATE 0x2000
+/* INCOMPAT: Fail to mount the filesystem */
+#define JFFS2_FEATURE_INCOMPAT 0xc000
+/* ROCOMPAT: Mount read-only */
+#define JFFS2_FEATURE_ROCOMPAT 0x8000
+/* RWCOMPAT_COPY: Mount read/write, and copy the node when it's GC'd */
+#define JFFS2_FEATURE_RWCOMPAT_COPY 0x4000
+/* RWCOMPAT_DELETE: Mount read/write, and delete the node when it's GC'd */
+#define JFFS2_FEATURE_RWCOMPAT_DELETE 0x0000
+
+#define JFFS2_NODETYPE_DIRENT (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 1)
+#define JFFS2_NODETYPE_INODE (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 2)
+#define JFFS2_NODETYPE_CLEANMARKER (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 3)
+#define JFFS2_NODETYPE_PADDING (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 4)
+
+#define JFFS2_NODETYPE_SUMMARY (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 6)
+
+#define JFFS2_NODETYPE_XATTR (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 8)
+#define JFFS2_NODETYPE_XREF (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 9)
+
+/* XATTR Related */
+#define JFFS2_XPREFIX_USER		1	/* for "user." */
+#define JFFS2_XPREFIX_SECURITY		2	/* for "security." */
+#define JFFS2_XPREFIX_ACL_ACCESS	3	/* for "system.posix_acl_access" */
+#define JFFS2_XPREFIX_ACL_DEFAULT	4	/* for "system.posix_acl_default" */
+#define JFFS2_XPREFIX_TRUSTED		5	/* for "trusted.*" */
+
+#define JFFS2_ACL_VERSION		0x0001
+
+// Maybe later...
+//#define JFFS2_NODETYPE_CHECKPOINT (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 3)
+//#define JFFS2_NODETYPE_OPTIONS (JFFS2_FEATURE_RWCOMPAT_COPY | JFFS2_NODE_ACCURATE | 4)
+
+
+#define JFFS2_INO_FLAG_PREREAD	  1	/* Do read_inode() for this one at
+					   mount time, don't wait for it to
+					   happen later */
+#define JFFS2_INO_FLAG_USERCOMPR  2	/* User has requested a specific
+					   compression type */
+
+
+/* These can go once we've made sure we've caught all uses without
+   byteswapping */
+
+typedef struct {
+	__u32 v32;
+} __attribute__((packed)) jint32_t;
+
+typedef struct {
+	__u32 m;
+} __attribute__((packed)) jmode_t;
+
+typedef struct {
+	__u16 v16;
+} __attribute__((packed)) jint16_t;
+
+struct jffs2_unknown_node
+{
+	/* All start like this */
+	jint16_t magic;
+	jint16_t nodetype;
+	jint32_t totlen; /* So we can skip over nodes we don't grok */
+	jint32_t hdr_crc;
+};
+
+struct jffs2_raw_dirent
+{
+	jint16_t magic;
+	jint16_t nodetype;	/* == JFFS2_NODETYPE_DIRENT */
+	jint32_t totlen;
+	jint32_t hdr_crc;
+	jint32_t pino;
+	jint32_t version;
+	jint32_t ino; /* == zero for unlink */
+	jint32_t mctime;
+	__u8 nsize;
+	__u8 type;
+	__u8 unused[2];
+	jint32_t node_crc;
+	jint32_t name_crc;
+	__u8 name[0];
+};
+
+/* The JFFS2 raw inode structure: Used for storage on physical media.  */
+/* The uid, gid, atime, mtime and ctime members could be longer, but
+   are left like this for space efficiency. If and when people decide
+   they really need them extended, it's simple enough to add support for
+   a new type of raw node.
+*/
+struct jffs2_raw_inode
+{
+	jint16_t magic;      /* A constant magic number.  */
+	jint16_t nodetype;   /* == JFFS2_NODETYPE_INODE */
+	jint32_t totlen;     /* Total length of this node (inc data, etc.) */
+	jint32_t hdr_crc;
+	jint32_t ino;        /* Inode number.  */
+	jint32_t version;    /* Version number.  */
+	jmode_t mode;       /* The file's type or mode.  */
+	jint16_t uid;        /* The file's owner.  */
+	jint16_t gid;        /* The file's group.  */
+	jint32_t isize;      /* Total resultant size of this inode (used for truncations)  */
+	jint32_t atime;      /* Last access time.  */
+	jint32_t mtime;      /* Last modification time.  */
+	jint32_t ctime;      /* Change time.  */
+	jint32_t offset;     /* Where to begin to write.  */
+	jint32_t csize;      /* (Compressed) data size */
+	jint32_t dsize;	     /* Size of the node's data. (after decompression) */
+	__u8 compr;       /* Compression algorithm used */
+	__u8 usercompr;   /* Compression algorithm requested by the user */
+	jint16_t flags;	     /* See JFFS2_INO_FLAG_* */
+	jint32_t data_crc;   /* CRC for the (compressed) data.  */
+	jint32_t node_crc;   /* CRC for the raw inode (excluding data)  */
+	__u8 data[0];
+};
+
+struct jffs2_raw_xattr {
+	jint16_t magic;
+	jint16_t nodetype;	/* = JFFS2_NODETYPE_XATTR */
+	jint32_t totlen;
+	jint32_t hdr_crc;
+	jint32_t xid;		/* XATTR identifier number */
+	jint32_t version;
+	__u8 xprefix;
+	__u8 name_len;
+	jint16_t value_len;
+	jint32_t data_crc;
+	jint32_t node_crc;
+	__u8 data[0];
+} __attribute__((packed));
+
+struct jffs2_raw_xref
+{
+	jint16_t magic;
+	jint16_t nodetype;	/* = JFFS2_NODETYPE_XREF */
+	jint32_t totlen;
+	jint32_t hdr_crc;
+	jint32_t ino;		/* inode number */
+	jint32_t xid;		/* XATTR identifier number */
+	jint32_t xseqno;	/* xref sequential number */
+	jint32_t node_crc;
+} __attribute__((packed));
+
+struct jffs2_raw_summary
+{
+	jint16_t magic;
+	jint16_t nodetype; 	/* = JFFS2_NODETYPE_SUMMARY */
+	jint32_t totlen;
+	jint32_t hdr_crc;
+	jint32_t sum_num;	/* number of sum entries*/
+	jint32_t cln_mkr;	/* clean marker size, 0 = no cleanmarker */
+	jint32_t padded;	/* sum of the size of padding nodes */
+	jint32_t sum_crc;	/* summary information crc */
+	jint32_t node_crc; 	/* node crc */
+	jint32_t sum[0]; 	/* inode summary info */
+};
+
+union jffs2_node_union
+{
+	struct jffs2_raw_inode i;
+	struct jffs2_raw_dirent d;
+	struct jffs2_raw_xattr x;
+	struct jffs2_raw_xref r;
+	struct jffs2_raw_summary s;
+	struct jffs2_unknown_node u;
+};
+
+/* Data payload for device nodes. */
+union jffs2_device_node {
+	jint16_t old_id;
+	jint32_t new_id;
+};
+
+#endif /* __LINUX_JFFS2_H__ */
diff --git a/include/linux/jhash.h b/include/linux/jhash.h
new file mode 100644
index 00000000..47cb09ed
--- /dev/null
+++ b/include/linux/jhash.h
@@ -0,0 +1,170 @@
+#ifndef _LINUX_JHASH_H
+#define _LINUX_JHASH_H
+
+/* jhash.h: Jenkins hash support.
+ *
+ * Copyright (C) 2006. Bob Jenkins (bob_jenkins@burtleburtle.net)
+ *
+ * http://burtleburtle.net/bob/hash/
+ *
+ * These are the credits from Bob's sources:
+ *
+ * lookup3.c, by Bob Jenkins, May 2006, Public Domain.
+ *
+ * These are functions for producing 32-bit hashes for hash table lookup.
+ * hashword(), hashlittle(), hashlittle2(), hashbig(), mix(), and final()
+ * are externally useful functions.  Routines to test the hash are included
+ * if SELF_TEST is defined.  You can use this free for any purpose.  It's in
+ * the public domain.  It has no warranty.
+ *
+ * Copyright (C) 2009-2010 Jozsef Kadlecsik (kadlec@blackhole.kfki.hu)
+ *
+ * I've modified Bob's hash to be useful in the Linux kernel, and
+ * any bugs present are my fault.
+ * Jozsef
+ */
+#include <linux/bitops.h>
+#include <linux/unaligned/packed_struct.h>
+
+/* Best hash sizes are of power of two */
+#define jhash_size(n)   ((u32)1<<(n))
+/* Mask the hash value, i.e (value & jhash_mask(n)) instead of (value % n) */
+#define jhash_mask(n)   (jhash_size(n)-1)
+
+/* __jhash_mix -- mix 3 32-bit values reversibly. */
+#define __jhash_mix(a, b, c)			\
+{						\
+	a -= c;  a ^= rol32(c, 4);  c += b;	\
+	b -= a;  b ^= rol32(a, 6);  a += c;	\
+	c -= b;  c ^= rol32(b, 8);  b += a;	\
+	a -= c;  a ^= rol32(c, 16); c += b;	\
+	b -= a;  b ^= rol32(a, 19); a += c;	\
+	c -= b;  c ^= rol32(b, 4);  b += a;	\
+}
+
+/* __jhash_final - final mixing of 3 32-bit values (a,b,c) into c */
+#define __jhash_final(a, b, c)			\
+{						\
+	c ^= b; c -= rol32(b, 14);		\
+	a ^= c; a -= rol32(c, 11);		\
+	b ^= a; b -= rol32(a, 25);		\
+	c ^= b; c -= rol32(b, 16);		\
+	a ^= c; a -= rol32(c, 4);		\
+	b ^= a; b -= rol32(a, 14);		\
+	c ^= b; c -= rol32(b, 24);		\
+}
+
+/* An arbitrary initial parameter */
+#define JHASH_INITVAL		0xdeadbeef
+
+/* jhash - hash an arbitrary key
+ * @k: sequence of bytes as key
+ * @length: the length of the key
+ * @initval: the previous hash, or an arbitray value
+ *
+ * The generic version, hashes an arbitrary sequence of bytes.
+ * No alignment or length assumptions are made about the input key.
+ *
+ * Returns the hash value of the key. The result depends on endianness.
+ */
+static inline u32 jhash(const void *key, u32 length, u32 initval)
+{
+	u32 a, b, c;
+	const u8 *k = key;
+
+	/* Set up the internal state */
+	a = b = c = JHASH_INITVAL + length + initval;
+
+	/* All but the last block: affect some 32 bits of (a,b,c) */
+	while (length > 12) {
+		a += __get_unaligned_cpu32(k);
+		b += __get_unaligned_cpu32(k + 4);
+		c += __get_unaligned_cpu32(k + 8);
+		__jhash_mix(a, b, c);
+		length -= 12;
+		k += 12;
+	}
+	/* Last block: affect all 32 bits of (c) */
+	/* All the case statements fall through */
+	switch (length) {
+	case 12: c += (u32)k[11]<<24;
+	case 11: c += (u32)k[10]<<16;
+	case 10: c += (u32)k[9]<<8;
+	case 9:  c += k[8];
+	case 8:  b += (u32)k[7]<<24;
+	case 7:  b += (u32)k[6]<<16;
+	case 6:  b += (u32)k[5]<<8;
+	case 5:  b += k[4];
+	case 4:  a += (u32)k[3]<<24;
+	case 3:  a += (u32)k[2]<<16;
+	case 2:  a += (u32)k[1]<<8;
+	case 1:  a += k[0];
+		 __jhash_final(a, b, c);
+	case 0: /* Nothing left to add */
+		break;
+	}
+
+	return c;
+}
+
+/* jhash2 - hash an array of u32's
+ * @k: the key which must be an array of u32's
+ * @length: the number of u32's in the key
+ * @initval: the previous hash, or an arbitray value
+ *
+ * Returns the hash value of the key.
+ */
+static inline u32 jhash2(const u32 *k, u32 length, u32 initval)
+{
+	u32 a, b, c;
+
+	/* Set up the internal state */
+	a = b = c = JHASH_INITVAL + (length<<2) + initval;
+
+	/* Handle most of the key */
+	while (length > 3) {
+		a += k[0];
+		b += k[1];
+		c += k[2];
+		__jhash_mix(a, b, c);
+		length -= 3;
+		k += 3;
+	}
+
+	/* Handle the last 3 u32's: all the case statements fall through */
+	switch (length) {
+	case 3: c += k[2];
+	case 2: b += k[1];
+	case 1: a += k[0];
+		__jhash_final(a, b, c);
+	case 0:	/* Nothing left to add */
+		break;
+	}
+
+	return c;
+}
+
+
+/* jhash_3words - hash exactly 3, 2 or 1 word(s) */
+static inline u32 jhash_3words(u32 a, u32 b, u32 c, u32 initval)
+{
+	a += JHASH_INITVAL;
+	b += JHASH_INITVAL;
+	c += initval;
+
+	__jhash_final(a, b, c);
+
+	return c;
+}
+
+static inline u32 jhash_2words(u32 a, u32 b, u32 initval)
+{
+	return jhash_3words(a, b, 0, initval);
+}
+
+static inline u32 jhash_1word(u32 a, u32 initval)
+{
+	return jhash_3words(a, 0, 0, initval);
+}
+
+#endif /* _LINUX_JHASH_H */
diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h
new file mode 100644
index 00000000..265e2c3c
--- /dev/null
+++ b/include/linux/jiffies.h
@@ -0,0 +1,315 @@
+#ifndef _LINUX_JIFFIES_H
+#define _LINUX_JIFFIES_H
+
+#include <linux/math64.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <asm/param.h>			/* for HZ */
+
+/*
+ * The following defines establish the engineering parameters of the PLL
+ * model. The HZ variable establishes the timer interrupt frequency, 100 Hz
+ * for the SunOS kernel, 256 Hz for the Ultrix kernel and 1024 Hz for the
+ * OSF/1 kernel. The SHIFT_HZ define expresses the same value as the
+ * nearest power of two in order to avoid hardware multiply operations.
+ */
+#if HZ >= 12 && HZ < 24
+# define SHIFT_HZ	4
+#elif HZ >= 24 && HZ < 48
+# define SHIFT_HZ	5
+#elif HZ >= 48 && HZ < 96
+# define SHIFT_HZ	6
+#elif HZ >= 96 && HZ < 192
+# define SHIFT_HZ	7
+#elif HZ >= 192 && HZ < 384
+# define SHIFT_HZ	8
+#elif HZ >= 384 && HZ < 768
+# define SHIFT_HZ	9
+#elif HZ >= 768 && HZ < 1536
+# define SHIFT_HZ	10
+#elif HZ >= 1536 && HZ < 3072
+# define SHIFT_HZ	11
+#elif HZ >= 3072 && HZ < 6144
+# define SHIFT_HZ	12
+#elif HZ >= 6144 && HZ < 12288
+# define SHIFT_HZ	13
+#else
+# error Invalid value of HZ.
+#endif
+
+/* LATCH is used in the interval timer and ftape setup. */
+#define LATCH  ((CLOCK_TICK_RATE + HZ/2) / HZ)	/* For divider */
+
+/* Suppose we want to divide two numbers NOM and DEN: NOM/DEN, then we can
+ * improve accuracy by shifting LSH bits, hence calculating:
+ *     (NOM << LSH) / DEN
+ * This however means trouble for large NOM, because (NOM << LSH) may no
+ * longer fit in 32 bits. The following way of calculating this gives us
+ * some slack, under the following conditions:
+ *   - (NOM / DEN) fits in (32 - LSH) bits.
+ *   - (NOM % DEN) fits in (32 - LSH) bits.
+ */
+#define SH_DIV(NOM,DEN,LSH) (   (((NOM) / (DEN)) << (LSH))              \
+                             + ((((NOM) % (DEN)) << (LSH)) + (DEN) / 2) / (DEN))
+
+/* HZ is the requested value. ACTHZ is actual HZ ("<< 8" is for accuracy) */
+#define ACTHZ (SH_DIV (CLOCK_TICK_RATE, LATCH, 8))
+
+/* TICK_NSEC is the time between ticks in nsec assuming real ACTHZ */
+#define TICK_NSEC (SH_DIV (1000000UL * 1000, ACTHZ, 8))
+
+/* TICK_USEC is the time between ticks in usec assuming fake USER_HZ */
+#define TICK_USEC ((1000000UL + USER_HZ/2) / USER_HZ)
+
+/* TICK_USEC_TO_NSEC is the time between ticks in nsec assuming real ACTHZ and	*/
+/* a value TUSEC for TICK_USEC (can be set bij adjtimex)		*/
+#define TICK_USEC_TO_NSEC(TUSEC) (SH_DIV (TUSEC * USER_HZ * 1000, ACTHZ, 8))
+
+/* some arch's have a small-data section that can be accessed register-relative
+ * but that can only take up to, say, 4-byte variables. jiffies being part of
+ * an 8-byte variable may not be correctly accessed unless we force the issue
+ */
+#define __jiffy_data  __attribute__((section(".data")))
+
+/*
+ * The 64-bit value is not atomic - you MUST NOT read it
+ * without sampling the sequence number in xtime_lock.
+ * get_jiffies_64() will do this for you as appropriate.
+ */
+extern u64 __jiffy_data jiffies_64;
+extern unsigned long volatile __jiffy_data jiffies;
+
+#if (BITS_PER_LONG < 64)
+u64 get_jiffies_64(void);
+#else
+static inline u64 get_jiffies_64(void)
+{
+	return (u64)jiffies;
+}
+#endif
+
+/*
+ *	These inlines deal with timer wrapping correctly. You are 
+ *	strongly encouraged to use them
+ *	1. Because people otherwise forget
+ *	2. Because if the timer wrap changes in future you won't have to
+ *	   alter your driver code.
+ *
+ * time_after(a,b) returns true if the time a is after time b.
+ *
+ * Do this with "<0" and ">=0" to only test the sign of the result. A
+ * good compiler would generate better code (and a really good compiler
+ * wouldn't care). Gcc is currently neither.
+ */
+#define time_after(a,b)		\
+	(typecheck(unsigned long, a) && \
+	 typecheck(unsigned long, b) && \
+	 ((long)(b) - (long)(a) < 0))
+#define time_before(a,b)	time_after(b,a)
+
+#define time_after_eq(a,b)	\
+	(typecheck(unsigned long, a) && \
+	 typecheck(unsigned long, b) && \
+	 ((long)(a) - (long)(b) >= 0))
+#define time_before_eq(a,b)	time_after_eq(b,a)
+
+/*
+ * Calculate whether a is in the range of [b, c].
+ */
+#define time_in_range(a,b,c) \
+	(time_after_eq(a,b) && \
+	 time_before_eq(a,c))
+
+/*
+ * Calculate whether a is in the range of [b, c).
+ */
+#define time_in_range_open(a,b,c) \
+	(time_after_eq(a,b) && \
+	 time_before(a,c))
+
+/* Same as above, but does so with platform independent 64bit types.
+ * These must be used when utilizing jiffies_64 (i.e. return value of
+ * get_jiffies_64() */
+#define time_after64(a,b)	\
+	(typecheck(__u64, a) &&	\
+	 typecheck(__u64, b) && \
+	 ((__s64)(b) - (__s64)(a) < 0))
+#define time_before64(a,b)	time_after64(b,a)
+
+#define time_after_eq64(a,b)	\
+	(typecheck(__u64, a) && \
+	 typecheck(__u64, b) && \
+	 ((__s64)(a) - (__s64)(b) >= 0))
+#define time_before_eq64(a,b)	time_after_eq64(b,a)
+
+/*
+ * These four macros compare jiffies and 'a' for convenience.
+ */
+
+/* time_is_before_jiffies(a) return true if a is before jiffies */
+#define time_is_before_jiffies(a) time_after(jiffies, a)
+
+/* time_is_after_jiffies(a) return true if a is after jiffies */
+#define time_is_after_jiffies(a) time_before(jiffies, a)
+
+/* time_is_before_eq_jiffies(a) return true if a is before or equal to jiffies*/
+#define time_is_before_eq_jiffies(a) time_after_eq(jiffies, a)
+
+/* time_is_after_eq_jiffies(a) return true if a is after or equal to jiffies*/
+#define time_is_after_eq_jiffies(a) time_before_eq(jiffies, a)
+
+/*
+ * Have the 32 bit jiffies value wrap 5 minutes after boot
+ * so jiffies wrap bugs show up earlier.
+ */
+#define INITIAL_JIFFIES ((unsigned long)(unsigned int) (-300*HZ))
+
+/*
+ * Change timeval to jiffies, trying to avoid the
+ * most obvious overflows..
+ *
+ * And some not so obvious.
+ *
+ * Note that we don't want to return LONG_MAX, because
+ * for various timeout reasons we often end up having
+ * to wait "jiffies+1" in order to guarantee that we wait
+ * at _least_ "jiffies" - so "jiffies+1" had better still
+ * be positive.
+ */
+#define MAX_JIFFY_OFFSET ((LONG_MAX >> 1)-1)
+
+extern unsigned long preset_lpj;
+
+/*
+ * We want to do realistic conversions of time so we need to use the same
+ * values the update wall clock code uses as the jiffies size.  This value
+ * is: TICK_NSEC (which is defined in timex.h).  This
+ * is a constant and is in nanoseconds.  We will use scaled math
+ * with a set of scales defined here as SEC_JIFFIE_SC,  USEC_JIFFIE_SC and
+ * NSEC_JIFFIE_SC.  Note that these defines contain nothing but
+ * constants and so are computed at compile time.  SHIFT_HZ (computed in
+ * timex.h) adjusts the scaling for different HZ values.
+
+ * Scaled math???  What is that?
+ *
+ * Scaled math is a way to do integer math on values that would,
+ * otherwise, either overflow, underflow, or cause undesired div
+ * instructions to appear in the execution path.  In short, we "scale"
+ * up the operands so they take more bits (more precision, less
+ * underflow), do the desired operation and then "scale" the result back
+ * by the same amount.  If we do the scaling by shifting we avoid the
+ * costly mpy and the dastardly div instructions.
+
+ * Suppose, for example, we want to convert from seconds to jiffies
+ * where jiffies is defined in nanoseconds as NSEC_PER_JIFFIE.  The
+ * simple math is: jiff = (sec * NSEC_PER_SEC) / NSEC_PER_JIFFIE; We
+ * observe that (NSEC_PER_SEC / NSEC_PER_JIFFIE) is a constant which we
+ * might calculate at compile time, however, the result will only have
+ * about 3-4 bits of precision (less for smaller values of HZ).
+ *
+ * So, we scale as follows:
+ * jiff = (sec) * (NSEC_PER_SEC / NSEC_PER_JIFFIE);
+ * jiff = ((sec) * ((NSEC_PER_SEC * SCALE)/ NSEC_PER_JIFFIE)) / SCALE;
+ * Then we make SCALE a power of two so:
+ * jiff = ((sec) * ((NSEC_PER_SEC << SCALE)/ NSEC_PER_JIFFIE)) >> SCALE;
+ * Now we define:
+ * #define SEC_CONV = ((NSEC_PER_SEC << SCALE)/ NSEC_PER_JIFFIE))
+ * jiff = (sec * SEC_CONV) >> SCALE;
+ *
+ * Often the math we use will expand beyond 32-bits so we tell C how to
+ * do this and pass the 64-bit result of the mpy through the ">> SCALE"
+ * which should take the result back to 32-bits.  We want this expansion
+ * to capture as much precision as possible.  At the same time we don't
+ * want to overflow so we pick the SCALE to avoid this.  In this file,
+ * that means using a different scale for each range of HZ values (as
+ * defined in timex.h).
+ *
+ * For those who want to know, gcc will give a 64-bit result from a "*"
+ * operator if the result is a long long AND at least one of the
+ * operands is cast to long long (usually just prior to the "*" so as
+ * not to confuse it into thinking it really has a 64-bit operand,
+ * which, buy the way, it can do, but it takes more code and at least 2
+ * mpys).
+
+ * We also need to be aware that one second in nanoseconds is only a
+ * couple of bits away from overflowing a 32-bit word, so we MUST use
+ * 64-bits to get the full range time in nanoseconds.
+
+ */
+
+/*
+ * Here are the scales we will use.  One for seconds, nanoseconds and
+ * microseconds.
+ *
+ * Within the limits of cpp we do a rough cut at the SEC_JIFFIE_SC and
+ * check if the sign bit is set.  If not, we bump the shift count by 1.
+ * (Gets an extra bit of precision where we can use it.)
+ * We know it is set for HZ = 1024 and HZ = 100 not for 1000.
+ * Haven't tested others.
+
+ * Limits of cpp (for #if expressions) only long (no long long), but
+ * then we only need the most signicant bit.
+ */
+
+#define SEC_JIFFIE_SC (31 - SHIFT_HZ)
+#if !((((NSEC_PER_SEC << 2) / TICK_NSEC) << (SEC_JIFFIE_SC - 2)) & 0x80000000)
+#undef SEC_JIFFIE_SC
+#define SEC_JIFFIE_SC (32 - SHIFT_HZ)
+#endif
+#define NSEC_JIFFIE_SC (SEC_JIFFIE_SC + 29)
+#define USEC_JIFFIE_SC (SEC_JIFFIE_SC + 19)
+#define SEC_CONVERSION ((unsigned long)((((u64)NSEC_PER_SEC << SEC_JIFFIE_SC) +\
+                                TICK_NSEC -1) / (u64)TICK_NSEC))
+
+#define NSEC_CONVERSION ((unsigned long)((((u64)1 << NSEC_JIFFIE_SC) +\
+                                        TICK_NSEC -1) / (u64)TICK_NSEC))
+#define USEC_CONVERSION  \
+                    ((unsigned long)((((u64)NSEC_PER_USEC << USEC_JIFFIE_SC) +\
+                                        TICK_NSEC -1) / (u64)TICK_NSEC))
+/*
+ * USEC_ROUND is used in the timeval to jiffie conversion.  See there
+ * for more details.  It is the scaled resolution rounding value.  Note
+ * that it is a 64-bit value.  Since, when it is applied, we are already
+ * in jiffies (albit scaled), it is nothing but the bits we will shift
+ * off.
+ */
+#define USEC_ROUND (u64)(((u64)1 << USEC_JIFFIE_SC) - 1)
+/*
+ * The maximum jiffie value is (MAX_INT >> 1).  Here we translate that
+ * into seconds.  The 64-bit case will overflow if we are not careful,
+ * so use the messy SH_DIV macro to do it.  Still all constants.
+ */
+#if BITS_PER_LONG < 64
+# define MAX_SEC_IN_JIFFIES \
+	(long)((u64)((u64)MAX_JIFFY_OFFSET * TICK_NSEC) / NSEC_PER_SEC)
+#else	/* take care of overflow on 64 bits machines */
+# define MAX_SEC_IN_JIFFIES \
+	(SH_DIV((MAX_JIFFY_OFFSET >> SEC_JIFFIE_SC) * TICK_NSEC, NSEC_PER_SEC, 1) - 1)
+
+#endif
+
+/*
+ * Convert various time units to each other:
+ */
+extern unsigned int jiffies_to_msecs(const unsigned long j);
+extern unsigned int jiffies_to_usecs(const unsigned long j);
+extern unsigned long msecs_to_jiffies(const unsigned int m);
+extern unsigned long usecs_to_jiffies(const unsigned int u);
+extern unsigned long timespec_to_jiffies(const struct timespec *value);
+extern void jiffies_to_timespec(const unsigned long jiffies,
+				struct timespec *value);
+extern unsigned long timeval_to_jiffies(const struct timeval *value);
+extern void jiffies_to_timeval(const unsigned long jiffies,
+			       struct timeval *value);
+extern clock_t jiffies_to_clock_t(unsigned long x);
+extern unsigned long clock_t_to_jiffies(unsigned long x);
+extern u64 jiffies_64_to_clock_t(u64 x);
+extern u64 nsec_to_clock_t(u64 x);
+extern u64 nsecs_to_jiffies64(u64 n);
+extern unsigned long nsecs_to_jiffies(u64 n);
+
+#define TIMESTAMP_SIZE	30
+
+#endif
diff --git a/include/linux/journal-head.h b/include/linux/journal-head.h
new file mode 100644
index 00000000..c18b46f8
--- /dev/null
+++ b/include/linux/journal-head.h
@@ -0,0 +1,109 @@
+/*
+ * include/linux/journal-head.h
+ *
+ * buffer_head fields for JBD
+ *
+ * 27 May 2001 Andrew Morton
+ *	Created - pulled out of fs.h
+ */
+
+#ifndef JOURNAL_HEAD_H_INCLUDED
+#define JOURNAL_HEAD_H_INCLUDED
+
+typedef unsigned int		tid_t;		/* Unique transaction ID */
+typedef struct transaction_s	transaction_t;	/* Compound transaction type */
+
+
+struct buffer_head;
+
+struct journal_head {
+	/*
+	 * Points back to our buffer_head. [jbd_lock_bh_journal_head()]
+	 */
+	struct buffer_head *b_bh;
+
+	/*
+	 * Reference count - see description in journal.c
+	 * [jbd_lock_bh_journal_head()]
+	 */
+	int b_jcount;
+
+	/*
+	 * Journalling list for this buffer [jbd_lock_bh_state()]
+	 */
+	unsigned b_jlist;
+
+	/*
+	 * This flag signals the buffer has been modified by
+	 * the currently running transaction
+	 * [jbd_lock_bh_state()]
+	 */
+	unsigned b_modified;
+
+	/*
+	 * This feild tracks the last transaction id in which this buffer
+	 * has been cowed
+	 * [jbd_lock_bh_state()]
+	 */
+	tid_t b_cow_tid;
+
+	/*
+	 * Copy of the buffer data frozen for writing to the log.
+	 * [jbd_lock_bh_state()]
+	 */
+	char *b_frozen_data;
+
+	/*
+	 * Pointer to a saved copy of the buffer containing no uncommitted
+	 * deallocation references, so that allocations can avoid overwriting
+	 * uncommitted deletes. [jbd_lock_bh_state()]
+	 */
+	char *b_committed_data;
+
+	/*
+	 * Pointer to the compound transaction which owns this buffer's
+	 * metadata: either the running transaction or the committing
+	 * transaction (if there is one).  Only applies to buffers on a
+	 * transaction's data or metadata journaling list.
+	 * [j_list_lock] [jbd_lock_bh_state()]
+	 * Either of these locks is enough for reading, both are needed for
+	 * changes.
+	 */
+	transaction_t *b_transaction;
+
+	/*
+	 * Pointer to the running compound transaction which is currently
+	 * modifying the buffer's metadata, if there was already a transaction
+	 * committing it when the new transaction touched it.
+	 * [t_list_lock] [jbd_lock_bh_state()]
+	 */
+	transaction_t *b_next_transaction;
+
+	/*
+	 * Doubly-linked list of buffers on a transaction's data, metadata or
+	 * forget queue. [t_list_lock] [jbd_lock_bh_state()]
+	 */
+	struct journal_head *b_tnext, *b_tprev;
+
+	/*
+	 * Pointer to the compound transaction against which this buffer
+	 * is checkpointed.  Only dirty buffers can be checkpointed.
+	 * [j_list_lock]
+	 */
+	transaction_t *b_cp_transaction;
+
+	/*
+	 * Doubly-linked list of buffers still remaining to be flushed
+	 * before an old transaction can be checkpointed.
+	 * [j_list_lock]
+	 */
+	struct journal_head *b_cpnext, *b_cpprev;
+
+	/* Trigger type */
+	struct jbd2_buffer_trigger_type *b_triggers;
+
+	/* Trigger type for the committing transaction's frozen data */
+	struct jbd2_buffer_trigger_type *b_frozen_triggers;
+};
+
+#endif		/* JOURNAL_HEAD_H_INCLUDED */
diff --git a/include/linux/joystick.h b/include/linux/joystick.h
new file mode 100644
index 00000000..47199b13
--- /dev/null
+++ b/include/linux/joystick.h
@@ -0,0 +1,145 @@
+#ifndef _LINUX_JOYSTICK_H
+#define _LINUX_JOYSTICK_H
+
+/*
+ *  Copyright (C) 1996-2000 Vojtech Pavlik
+ *
+ *  Sponsored by SuSE
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or 
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * 
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
+ * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
+ */
+
+#include <linux/types.h>
+#include <linux/input.h>
+
+/*
+ * Version
+ */
+
+#define JS_VERSION		0x020100
+
+/*
+ * Types and constants for reading from /dev/js
+ */
+
+#define JS_EVENT_BUTTON		0x01	/* button pressed/released */
+#define JS_EVENT_AXIS		0x02	/* joystick moved */
+#define JS_EVENT_INIT		0x80	/* initial state of device */
+
+struct js_event {
+	__u32 time;	/* event timestamp in milliseconds */
+	__s16 value;	/* value */
+	__u8 type;	/* event type */
+	__u8 number;	/* axis/button number */
+};
+
+/*
+ * IOCTL commands for joystick driver
+ */
+
+#define JSIOCGVERSION		_IOR('j', 0x01, __u32)				/* get driver version */
+
+#define JSIOCGAXES		_IOR('j', 0x11, __u8)				/* get number of axes */
+#define JSIOCGBUTTONS		_IOR('j', 0x12, __u8)				/* get number of buttons */
+#define JSIOCGNAME(len)		_IOC(_IOC_READ, 'j', 0x13, len)			/* get identifier string */
+
+#define JSIOCSCORR		_IOW('j', 0x21, struct js_corr)			/* set correction values */
+#define JSIOCGCORR		_IOR('j', 0x22, struct js_corr)			/* get correction values */
+
+#define JSIOCSAXMAP		_IOW('j', 0x31, __u8[ABS_CNT])			/* set axis mapping */
+#define JSIOCGAXMAP		_IOR('j', 0x32, __u8[ABS_CNT])			/* get axis mapping */
+#define JSIOCSBTNMAP		_IOW('j', 0x33, __u16[KEY_MAX - BTN_MISC + 1])	/* set button mapping */
+#define JSIOCGBTNMAP		_IOR('j', 0x34, __u16[KEY_MAX - BTN_MISC + 1])	/* get button mapping */
+
+/*
+ * Types and constants for get/set correction
+ */
+
+#define JS_CORR_NONE		0x00	/* returns raw values */
+#define JS_CORR_BROKEN		0x01	/* broken line */
+
+struct js_corr {
+	__s32 coef[8];
+	__s16 prec;
+	__u16 type;
+};
+
+/*
+ * v0.x compatibility definitions
+ */
+
+#define JS_RETURN		sizeof(struct JS_DATA_TYPE)
+#define JS_TRUE			1
+#define JS_FALSE		0
+#define JS_X_0			0x01
+#define JS_Y_0			0x02
+#define JS_X_1			0x04
+#define JS_Y_1			0x08
+#define JS_MAX			2
+
+#define JS_DEF_TIMEOUT		0x1300
+#define JS_DEF_CORR		0
+#define JS_DEF_TIMELIMIT	10L
+
+#define JS_SET_CAL		1
+#define JS_GET_CAL		2
+#define JS_SET_TIMEOUT		3
+#define JS_GET_TIMEOUT		4
+#define JS_SET_TIMELIMIT	5
+#define JS_GET_TIMELIMIT	6
+#define JS_GET_ALL		7
+#define JS_SET_ALL		8
+
+struct JS_DATA_TYPE {
+	__s32 buttons;
+	__s32 x;
+	__s32 y;
+};
+
+struct JS_DATA_SAVE_TYPE_32 {
+	__s32 JS_TIMEOUT;
+	__s32 BUSY;
+	__s32 JS_EXPIRETIME;
+	__s32 JS_TIMELIMIT;
+	struct JS_DATA_TYPE JS_SAVE;
+	struct JS_DATA_TYPE JS_CORR;
+};
+
+struct JS_DATA_SAVE_TYPE_64 {
+	__s32 JS_TIMEOUT;
+	__s32 BUSY;
+	__s64 JS_EXPIRETIME;
+	__s64 JS_TIMELIMIT;
+	struct JS_DATA_TYPE JS_SAVE;
+	struct JS_DATA_TYPE JS_CORR;
+};
+
+#ifdef __KERNEL__
+#if BITS_PER_LONG == 64
+#define JS_DATA_SAVE_TYPE JS_DATA_SAVE_TYPE_64
+#elif BITS_PER_LONG == 32
+#define JS_DATA_SAVE_TYPE JS_DATA_SAVE_TYPE_32
+#else
+#error Unexpected BITS_PER_LONG
+#endif
+#endif
+
+#endif /* _LINUX_JOYSTICK_H */
diff --git a/include/linux/jump_label.h b/include/linux/jump_label.h
new file mode 100644
index 00000000..c513a405
--- /dev/null
+++ b/include/linux/jump_label.h
@@ -0,0 +1,226 @@
+#ifndef _LINUX_JUMP_LABEL_H
+#define _LINUX_JUMP_LABEL_H
+
+/*
+ * Jump label support
+ *
+ * Copyright (C) 2009-2012 Jason Baron <jbaron@redhat.com>
+ * Copyright (C) 2011-2012 Peter Zijlstra <pzijlstr@redhat.com>
+ *
+ * Jump labels provide an interface to generate dynamic branches using
+ * self-modifying code. Assuming toolchain and architecture support the result
+ * of a "if (static_key_false(&key))" statement is a unconditional branch (which
+ * defaults to false - and the true block is placed out of line).
+ *
+ * However at runtime we can change the branch target using
+ * static_key_slow_{inc,dec}(). These function as a 'reference' count on the key
+ * object and for as long as there are references all branches referring to
+ * that particular key will point to the (out of line) true block.
+ *
+ * Since this relies on modifying code the static_key_slow_{inc,dec}() functions
+ * must be considered absolute slow paths (machine wide synchronization etc.).
+ * OTOH, since the affected branches are unconditional their runtime overhead
+ * will be absolutely minimal, esp. in the default (off) case where the total
+ * effect is a single NOP of appropriate size. The on case will patch in a jump
+ * to the out-of-line block.
+ *
+ * When the control is directly exposed to userspace it is prudent to delay the
+ * decrement to avoid high frequency code modifications which can (and do)
+ * cause significant performance degradation. Struct static_key_deferred and
+ * static_key_slow_dec_deferred() provide for this.
+ *
+ * Lacking toolchain and or architecture support, it falls back to a simple
+ * conditional branch.
+ *
+ * struct static_key my_key = STATIC_KEY_INIT_TRUE;
+ *
+ *   if (static_key_true(&my_key)) {
+ *   }
+ *
+ * will result in the true case being in-line and starts the key with a single
+ * reference. Mixing static_key_true() and static_key_false() on the same key is not
+ * allowed.
+ *
+ * Not initializing the key (static data is initialized to 0s anyway) is the
+ * same as using STATIC_KEY_INIT_FALSE and static_key_false() is
+ * equivalent with static_branch().
+ *
+*/
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/workqueue.h>
+
+#if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL)
+
+struct static_key {
+	atomic_t enabled;
+/* Set lsb bit to 1 if branch is default true, 0 ot */
+	struct jump_entry *entries;
+#ifdef CONFIG_MODULES
+	struct static_key_mod *next;
+#endif
+};
+
+struct static_key_deferred {
+	struct static_key key;
+	unsigned long timeout;
+	struct delayed_work work;
+};
+
+# include <asm/jump_label.h>
+# define HAVE_JUMP_LABEL
+#endif	/* CC_HAVE_ASM_GOTO && CONFIG_JUMP_LABEL */
+
+enum jump_label_type {
+	JUMP_LABEL_DISABLE = 0,
+	JUMP_LABEL_ENABLE,
+};
+
+struct module;
+
+#ifdef HAVE_JUMP_LABEL
+
+#define JUMP_LABEL_TRUE_BRANCH 1UL
+
+static
+inline struct jump_entry *jump_label_get_entries(struct static_key *key)
+{
+	return (struct jump_entry *)((unsigned long)key->entries
+						& ~JUMP_LABEL_TRUE_BRANCH);
+}
+
+static inline bool jump_label_get_branch_default(struct static_key *key)
+{
+	if ((unsigned long)key->entries & JUMP_LABEL_TRUE_BRANCH)
+		return true;
+	return false;
+}
+
+static __always_inline bool static_key_false(struct static_key *key)
+{
+	return arch_static_branch(key);
+}
+
+static __always_inline bool static_key_true(struct static_key *key)
+{
+	return !static_key_false(key);
+}
+
+/* Deprecated. Please use 'static_key_false() instead. */
+static __always_inline bool static_branch(struct static_key *key)
+{
+	return arch_static_branch(key);
+}
+
+extern struct jump_entry __start___jump_table[];
+extern struct jump_entry __stop___jump_table[];
+
+extern void jump_label_init(void);
+extern void jump_label_lock(void);
+extern void jump_label_unlock(void);
+extern void arch_jump_label_transform(struct jump_entry *entry,
+				      enum jump_label_type type);
+extern void arch_jump_label_transform_static(struct jump_entry *entry,
+					     enum jump_label_type type);
+extern int jump_label_text_reserved(void *start, void *end);
+extern void static_key_slow_inc(struct static_key *key);
+extern void static_key_slow_dec(struct static_key *key);
+extern void static_key_slow_dec_deferred(struct static_key_deferred *key);
+extern void jump_label_apply_nops(struct module *mod);
+extern void
+jump_label_rate_limit(struct static_key_deferred *key, unsigned long rl);
+
+#define STATIC_KEY_INIT_TRUE ((struct static_key) \
+	{ .enabled = ATOMIC_INIT(1), .entries = (void *)1 })
+#define STATIC_KEY_INIT_FALSE ((struct static_key) \
+	{ .enabled = ATOMIC_INIT(0), .entries = (void *)0 })
+
+#else  /* !HAVE_JUMP_LABEL */
+
+#include <linux/atomic.h>
+
+struct static_key {
+	atomic_t enabled;
+};
+
+static __always_inline void jump_label_init(void)
+{
+}
+
+struct static_key_deferred {
+	struct static_key  key;
+};
+
+static __always_inline bool static_key_false(struct static_key *key)
+{
+	if (unlikely(atomic_read(&key->enabled)) > 0)
+		return true;
+	return false;
+}
+
+static __always_inline bool static_key_true(struct static_key *key)
+{
+	if (likely(atomic_read(&key->enabled)) > 0)
+		return true;
+	return false;
+}
+
+/* Deprecated. Please use 'static_key_false() instead. */
+static __always_inline bool static_branch(struct static_key *key)
+{
+	if (unlikely(atomic_read(&key->enabled)) > 0)
+		return true;
+	return false;
+}
+
+static inline void static_key_slow_inc(struct static_key *key)
+{
+	atomic_inc(&key->enabled);
+}
+
+static inline void static_key_slow_dec(struct static_key *key)
+{
+	atomic_dec(&key->enabled);
+}
+
+static inline void static_key_slow_dec_deferred(struct static_key_deferred *key)
+{
+	static_key_slow_dec(&key->key);
+}
+
+static inline int jump_label_text_reserved(void *start, void *end)
+{
+	return 0;
+}
+
+static inline void jump_label_lock(void) {}
+static inline void jump_label_unlock(void) {}
+
+static inline int jump_label_apply_nops(struct module *mod)
+{
+	return 0;
+}
+
+static inline void
+jump_label_rate_limit(struct static_key_deferred *key,
+		unsigned long rl)
+{
+}
+
+#define STATIC_KEY_INIT_TRUE ((struct static_key) \
+		{ .enabled = ATOMIC_INIT(1) })
+#define STATIC_KEY_INIT_FALSE ((struct static_key) \
+		{ .enabled = ATOMIC_INIT(0) })
+
+#endif	/* HAVE_JUMP_LABEL */
+
+#define STATIC_KEY_INIT STATIC_KEY_INIT_FALSE
+#define jump_label_enabled static_key_enabled
+
+static inline bool static_key_enabled(struct static_key *key)
+{
+	return (atomic_read(&key->enabled) > 0);
+}
+
+#endif	/* _LINUX_JUMP_LABEL_H */
diff --git a/include/linux/jz4740-adc.h b/include/linux/jz4740-adc.h
new file mode 100644
index 00000000..8184578f
--- /dev/null
+++ b/include/linux/jz4740-adc.h
@@ -0,0 +1,32 @@
+
+#ifndef __LINUX_JZ4740_ADC
+#define __LINUX_JZ4740_ADC
+
+struct device;
+
+/*
+ * jz4740_adc_set_config - Configure a JZ4740 adc device
+ * @dev: Pointer to a jz4740-adc device
+ * @mask: Mask for the config value to be set
+ * @val: Value to be set
+ *
+ * This function can be used by the JZ4740 ADC mfd cells to configure their
+ * options in the shared config register.
+*/
+int jz4740_adc_set_config(struct device *dev, uint32_t mask, uint32_t val);
+
+#define JZ_ADC_CONFIG_SPZZ		BIT(31)
+#define JZ_ADC_CONFIG_EX_IN		BIT(30)
+#define JZ_ADC_CONFIG_DNUM_MASK		(0x7 << 16)
+#define JZ_ADC_CONFIG_DMA_ENABLE	BIT(15)
+#define JZ_ADC_CONFIG_XYZ_MASK		(0x2 << 13)
+#define JZ_ADC_CONFIG_SAMPLE_NUM_MASK	(0x7 << 10)
+#define JZ_ADC_CONFIG_CLKDIV_MASK	(0xf << 5)
+#define JZ_ADC_CONFIG_BAT_MB		BIT(4)
+
+#define JZ_ADC_CONFIG_DNUM(dnum)	((dnum) << 16)
+#define JZ_ADC_CONFIG_XYZ_OFFSET(dnum)	((xyz) << 13)
+#define JZ_ADC_CONFIG_SAMPLE_NUM(x)	((x) << 10)
+#define JZ_ADC_CONFIG_CLKDIV(div)	((div) << 5)
+
+#endif
diff --git a/include/linux/kallsyms.h b/include/linux/kallsyms.h
new file mode 100644
index 00000000..38757195
--- /dev/null
+++ b/include/linux/kallsyms.h
@@ -0,0 +1,121 @@
+/* Rewritten and vastly simplified by Rusty Russell for in-kernel
+ * module loader:
+ *   Copyright 2002 Rusty Russell <rusty@rustcorp.com.au> IBM Corporation
+ */
+#ifndef _LINUX_KALLSYMS_H
+#define _LINUX_KALLSYMS_H
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+
+#define KSYM_NAME_LEN 128
+#define KSYM_SYMBOL_LEN (sizeof("%s+%#lx/%#lx [%s]") + (KSYM_NAME_LEN - 1) + \
+			 2*(BITS_PER_LONG*3/10) + (MODULE_NAME_LEN - 1) + 1)
+
+struct module;
+
+#ifdef CONFIG_KALLSYMS
+/* Lookup the address for a symbol. Returns 0 if not found. */
+unsigned long kallsyms_lookup_name(const char *name);
+
+/* Call a function on each kallsyms symbol in the core kernel */
+int kallsyms_on_each_symbol(int (*fn)(void *, const char *, struct module *,
+				      unsigned long),
+			    void *data);
+
+extern int kallsyms_lookup_size_offset(unsigned long addr,
+				  unsigned long *symbolsize,
+				  unsigned long *offset);
+
+/* Lookup an address.  modname is set to NULL if it's in the kernel. */
+const char *kallsyms_lookup(unsigned long addr,
+			    unsigned long *symbolsize,
+			    unsigned long *offset,
+			    char **modname, char *namebuf);
+
+/* Look up a kernel symbol and return it in a text buffer. */
+extern int sprint_symbol(char *buffer, unsigned long address);
+extern int sprint_backtrace(char *buffer, unsigned long address);
+
+/* Look up a kernel symbol and print it to the kernel messages. */
+extern void __print_symbol(const char *fmt, unsigned long address);
+
+int lookup_symbol_name(unsigned long addr, char *symname);
+int lookup_symbol_attrs(unsigned long addr, unsigned long *size, unsigned long *offset, char *modname, char *name);
+
+#else /* !CONFIG_KALLSYMS */
+
+static inline unsigned long kallsyms_lookup_name(const char *name)
+{
+	return 0;
+}
+
+static inline int kallsyms_on_each_symbol(int (*fn)(void *, const char *,
+						    struct module *,
+						    unsigned long),
+					  void *data)
+{
+	return 0;
+}
+
+static inline int kallsyms_lookup_size_offset(unsigned long addr,
+					      unsigned long *symbolsize,
+					      unsigned long *offset)
+{
+	return 0;
+}
+
+static inline const char *kallsyms_lookup(unsigned long addr,
+					  unsigned long *symbolsize,
+					  unsigned long *offset,
+					  char **modname, char *namebuf)
+{
+	return NULL;
+}
+
+static inline int sprint_symbol(char *buffer, unsigned long addr)
+{
+	*buffer = '\0';
+	return 0;
+}
+
+static inline int sprint_backtrace(char *buffer, unsigned long addr)
+{
+	*buffer = '\0';
+	return 0;
+}
+
+static inline int lookup_symbol_name(unsigned long addr, char *symname)
+{
+	return -ERANGE;
+}
+
+static inline int lookup_symbol_attrs(unsigned long addr, unsigned long *size, unsigned long *offset, char *modname, char *name)
+{
+	return -ERANGE;
+}
+
+/* Stupid that this does nothing, but I didn't create this mess. */
+#define __print_symbol(fmt, addr)
+#endif /*CONFIG_KALLSYMS*/
+
+/* This macro allows us to keep printk typechecking */
+static __printf(1, 2)
+void __check_printsym_format(const char *fmt, ...)
+{
+}
+
+static inline void print_symbol(const char *fmt, unsigned long addr)
+{
+	__check_printsym_format(fmt, "");
+	__print_symbol(fmt, (unsigned long)
+		       __builtin_extract_return_addr((void *)addr));
+}
+
+static inline void print_ip_sym(unsigned long ip)
+{
+	printk("[<%p>] %pS\n", (void *) ip, (void *) ip);
+}
+
+#endif /*_LINUX_KALLSYMS_H*/
diff --git a/include/linux/kbd_diacr.h b/include/linux/kbd_diacr.h
new file mode 100644
index 00000000..7274ec68
--- /dev/null
+++ b/include/linux/kbd_diacr.h
@@ -0,0 +1,8 @@
+#ifndef _DIACR_H
+#define _DIACR_H
+#include <linux/kd.h>
+
+extern struct kbdiacruc accent_table[];
+extern unsigned int accent_table_size;
+
+#endif /* _DIACR_H */
diff --git a/include/linux/kbd_kern.h b/include/linux/kbd_kern.h
new file mode 100644
index 00000000..daf4a3a4
--- /dev/null
+++ b/include/linux/kbd_kern.h
@@ -0,0 +1,160 @@
+#ifndef _KBD_KERN_H
+#define _KBD_KERN_H
+
+#include <linux/tty.h>
+#include <linux/interrupt.h>
+#include <linux/keyboard.h>
+
+extern struct tasklet_struct keyboard_tasklet;
+
+extern char *func_table[MAX_NR_FUNC];
+extern char func_buf[];
+extern char *funcbufptr;
+extern int funcbufsize, funcbufleft;
+
+/*
+ * kbd->xxx contains the VC-local things (flag settings etc..)
+ *
+ * Note: externally visible are LED_SCR, LED_NUM, LED_CAP defined in kd.h
+ *       The code in KDGETLED / KDSETLED depends on the internal and
+ *       external order being the same.
+ *
+ * Note: lockstate is used as index in the array key_map.
+ */
+struct kbd_struct {
+
+	unsigned char lockstate;
+/* 8 modifiers - the names do not have any meaning at all;
+   they can be associated to arbitrarily chosen keys */
+#define VC_SHIFTLOCK	KG_SHIFT	/* shift lock mode */
+#define VC_ALTGRLOCK	KG_ALTGR	/* altgr lock mode */
+#define VC_CTRLLOCK	KG_CTRL 	/* control lock mode */
+#define VC_ALTLOCK	KG_ALT  	/* alt lock mode */
+#define VC_SHIFTLLOCK	KG_SHIFTL	/* shiftl lock mode */
+#define VC_SHIFTRLOCK	KG_SHIFTR	/* shiftr lock mode */
+#define VC_CTRLLLOCK	KG_CTRLL 	/* ctrll lock mode */
+#define VC_CTRLRLOCK	KG_CTRLR 	/* ctrlr lock mode */
+	unsigned char slockstate; 	/* for `sticky' Shift, Ctrl, etc. */
+
+	unsigned char ledmode:2; 	/* one 2-bit value */
+#define LED_SHOW_FLAGS 0        /* traditional state */
+#define LED_SHOW_IOCTL 1        /* only change leds upon ioctl */
+#define LED_SHOW_MEM 2          /* `heartbeat': peek into memory */
+
+	unsigned char ledflagstate:4;	/* flags, not lights */
+	unsigned char default_ledflagstate:4;
+#define VC_SCROLLOCK	0	/* scroll-lock mode */
+#define VC_NUMLOCK	1	/* numeric lock mode */
+#define VC_CAPSLOCK	2	/* capslock mode */
+#define VC_KANALOCK	3	/* kanalock mode */
+
+	unsigned char kbdmode:3;	/* one 3-bit value */
+#define VC_XLATE	0	/* translate keycodes using keymap */
+#define VC_MEDIUMRAW	1	/* medium raw (keycode) mode */
+#define VC_RAW		2	/* raw (scancode) mode */
+#define VC_UNICODE	3	/* Unicode mode */
+#define VC_OFF		4	/* disabled mode */
+
+	unsigned char modeflags:5;
+#define VC_APPLIC	0	/* application key mode */
+#define VC_CKMODE	1	/* cursor key mode */
+#define VC_REPEAT	2	/* keyboard repeat */
+#define VC_CRLF		3	/* 0 - enter sends CR, 1 - enter sends CRLF */
+#define VC_META		4	/* 0 - meta, 1 - meta=prefix with ESC */
+};
+
+extern int kbd_init(void);
+
+extern unsigned char getledstate(void);
+extern void setledstate(struct kbd_struct *kbd, unsigned int led);
+
+extern int do_poke_blanked_console;
+
+extern void (*kbd_ledfunc)(unsigned int led);
+
+extern int set_console(int nr);
+extern void schedule_console_callback(void);
+
+/* FIXME: review locking for vt.c callers */
+static inline void set_leds(void)
+{
+	tasklet_schedule(&keyboard_tasklet);
+}
+
+static inline int vc_kbd_mode(struct kbd_struct * kbd, int flag)
+{
+	return ((kbd->modeflags >> flag) & 1);
+}
+
+static inline int vc_kbd_led(struct kbd_struct * kbd, int flag)
+{
+	return ((kbd->ledflagstate >> flag) & 1);
+}
+
+static inline void set_vc_kbd_mode(struct kbd_struct * kbd, int flag)
+{
+	kbd->modeflags |= 1 << flag;
+}
+
+static inline void set_vc_kbd_led(struct kbd_struct * kbd, int flag)
+{
+	kbd->ledflagstate |= 1 << flag;
+}
+
+static inline void clr_vc_kbd_mode(struct kbd_struct * kbd, int flag)
+{
+	kbd->modeflags &= ~(1 << flag);
+}
+
+static inline void clr_vc_kbd_led(struct kbd_struct * kbd, int flag)
+{
+	kbd->ledflagstate &= ~(1 << flag);
+}
+
+static inline void chg_vc_kbd_lock(struct kbd_struct * kbd, int flag)
+{
+	kbd->lockstate ^= 1 << flag;
+}
+
+static inline void chg_vc_kbd_slock(struct kbd_struct * kbd, int flag)
+{
+	kbd->slockstate ^= 1 << flag;
+}
+
+static inline void chg_vc_kbd_mode(struct kbd_struct * kbd, int flag)
+{
+	kbd->modeflags ^= 1 << flag;
+}
+
+static inline void chg_vc_kbd_led(struct kbd_struct * kbd, int flag)
+{
+	kbd->ledflagstate ^= 1 << flag;
+}
+
+#define U(x) ((x) ^ 0xf000)
+
+#define BRL_UC_ROW 0x2800
+
+/* keyboard.c */
+
+struct console;
+
+void compute_shiftstate(void);
+
+/* defkeymap.c */
+
+extern unsigned int keymap_count;
+
+/* console.c */
+
+static inline void con_schedule_flip(struct tty_struct *t)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&t->buf.lock, flags);
+	if (t->buf.tail != NULL)
+		t->buf.tail->commit = t->buf.tail->used;
+	spin_unlock_irqrestore(&t->buf.lock, flags);
+	schedule_work(&t->buf.work);
+}
+
+#endif
diff --git a/include/linux/kbuild.h b/include/linux/kbuild.h
new file mode 100644
index 00000000..22a72198
--- /dev/null
+++ b/include/linux/kbuild.h
@@ -0,0 +1,15 @@
+#ifndef __LINUX_KBUILD_H
+#define __LINUX_KBUILD_H
+
+#define DEFINE(sym, val) \
+        asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+
+#define BLANK() asm volatile("\n->" : : )
+
+#define OFFSET(sym, str, mem) \
+	DEFINE(sym, offsetof(struct str, mem))
+
+#define COMMENT(x) \
+	asm volatile("\n->#" x)
+
+#endif
diff --git a/include/linux/kconfig.h b/include/linux/kconfig.h
new file mode 100644
index 00000000..be342b94
--- /dev/null
+++ b/include/linux/kconfig.h
@@ -0,0 +1,46 @@
+#ifndef __LINUX_KCONFIG_H
+#define __LINUX_KCONFIG_H
+
+#include <generated/autoconf.h>
+
+/*
+ * Helper macros to use CONFIG_ options in C/CPP expressions. Note that
+ * these only work with boolean and tristate options.
+ */
+
+/*
+ * Getting something that works in C and CPP for an arg that may or may
+ * not be defined is tricky.  Here, if we have "#define CONFIG_BOOGER 1"
+ * we match on the placeholder define, insert the "0," for arg1 and generate
+ * the triplet (0, 1, 0).  Then the last step cherry picks the 2nd arg (a one).
+ * When CONFIG_BOOGER is not defined, we generate a (... 1, 0) pair, and when
+ * the last step cherry picks the 2nd arg, we get a zero.
+ */
+#define __ARG_PLACEHOLDER_1 0,
+#define config_enabled(cfg) _config_enabled(cfg)
+#define _config_enabled(value) __config_enabled(__ARG_PLACEHOLDER_##value)
+#define __config_enabled(arg1_or_junk) ___config_enabled(arg1_or_junk 1, 0)
+#define ___config_enabled(__ignored, val, ...) val
+
+/*
+ * IS_ENABLED(CONFIG_FOO) evaluates to 1 if CONFIG_FOO is set to 'y' or 'm',
+ * 0 otherwise.
+ *
+ */
+#define IS_ENABLED(option) \
+	(config_enabled(option) || config_enabled(option##_MODULE))
+
+/*
+ * IS_BUILTIN(CONFIG_FOO) evaluates to 1 if CONFIG_FOO is set to 'y', 0
+ * otherwise. For boolean options, this is equivalent to
+ * IS_ENABLED(CONFIG_FOO).
+ */
+#define IS_BUILTIN(option) config_enabled(option)
+
+/*
+ * IS_MODULE(CONFIG_FOO) evaluates to 1 if CONFIG_FOO is set to 'm', 0
+ * otherwise.
+ */
+#define IS_MODULE(option) config_enabled(option##_MODULE)
+
+#endif /* __LINUX_KCONFIG_H */
diff --git a/include/linux/kd.h b/include/linux/kd.h
new file mode 100644
index 00000000..c36d8476
--- /dev/null
+++ b/include/linux/kd.h
@@ -0,0 +1,186 @@
+#ifndef _LINUX_KD_H
+#define _LINUX_KD_H
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+/* 0x4B is 'K', to avoid collision with termios and vt */
+
+#define GIO_FONT	0x4B60	/* gets font in expanded form */
+#define PIO_FONT	0x4B61	/* use font in expanded form */
+
+#define GIO_FONTX	0x4B6B	/* get font using struct consolefontdesc */
+#define PIO_FONTX	0x4B6C	/* set font using struct consolefontdesc */
+struct consolefontdesc {
+	unsigned short charcount;	/* characters in font (256 or 512) */
+	unsigned short charheight;	/* scan lines per character (1-32) */
+	char __user *chardata;		/* font data in expanded form */
+};
+
+#define PIO_FONTRESET   0x4B6D	/* reset to default font */
+
+#define GIO_CMAP	0x4B70	/* gets colour palette on VGA+ */
+#define PIO_CMAP	0x4B71	/* sets colour palette on VGA+ */
+
+#define KIOCSOUND	0x4B2F	/* start sound generation (0 for off) */
+#define KDMKTONE	0x4B30	/* generate tone */
+
+#define KDGETLED	0x4B31	/* return current led state */
+#define KDSETLED	0x4B32	/* set led state [lights, not flags] */
+#define 	LED_SCR		0x01	/* scroll lock led */
+#define 	LED_NUM		0x02	/* num lock led */
+#define 	LED_CAP		0x04	/* caps lock led */
+
+#define KDGKBTYPE	0x4B33	/* get keyboard type */
+#define 	KB_84		0x01
+#define 	KB_101		0x02 	/* this is what we always answer */
+#define 	KB_OTHER	0x03
+
+#define KDADDIO		0x4B34	/* add i/o port as valid */
+#define KDDELIO		0x4B35	/* del i/o port as valid */
+#define KDENABIO	0x4B36	/* enable i/o to video board */
+#define KDDISABIO	0x4B37	/* disable i/o to video board */
+
+#define KDSETMODE	0x4B3A	/* set text/graphics mode */
+#define		KD_TEXT		0x00
+#define		KD_GRAPHICS	0x01
+#define		KD_TEXT0	0x02	/* obsolete */
+#define		KD_TEXT1	0x03	/* obsolete */
+#define KDGETMODE	0x4B3B	/* get current mode */
+
+#define KDMAPDISP	0x4B3C	/* map display into address space */
+#define KDUNMAPDISP	0x4B3D	/* unmap display from address space */
+
+typedef char scrnmap_t;
+#define		E_TABSZ		256
+#define GIO_SCRNMAP	0x4B40	/* get screen mapping from kernel */
+#define PIO_SCRNMAP	0x4B41	/* put screen mapping table in kernel */
+#define GIO_UNISCRNMAP  0x4B69	/* get full Unicode screen mapping */
+#define PIO_UNISCRNMAP  0x4B6A  /* set full Unicode screen mapping */
+
+#define GIO_UNIMAP	0x4B66	/* get unicode-to-font mapping from kernel */
+struct unipair {
+	unsigned short unicode;
+	unsigned short fontpos;
+};
+struct unimapdesc {
+	unsigned short entry_ct;
+	struct unipair __user *entries;
+};
+#define PIO_UNIMAP	0x4B67	/* put unicode-to-font mapping in kernel */
+#define PIO_UNIMAPCLR	0x4B68	/* clear table, possibly advise hash algorithm */
+struct unimapinit {
+	unsigned short advised_hashsize;  /* 0 if no opinion */
+	unsigned short advised_hashstep;  /* 0 if no opinion */
+	unsigned short advised_hashlevel; /* 0 if no opinion */
+};
+
+#define UNI_DIRECT_BASE 0xF000	/* start of Direct Font Region */
+#define UNI_DIRECT_MASK 0x01FF	/* Direct Font Region bitmask */
+
+#define		K_RAW		0x00
+#define		K_XLATE		0x01
+#define		K_MEDIUMRAW	0x02
+#define		K_UNICODE	0x03
+#define		K_OFF		0x04
+#define KDGKBMODE	0x4B44	/* gets current keyboard mode */
+#define KDSKBMODE	0x4B45	/* sets current keyboard mode */
+
+#define		K_METABIT	0x03
+#define		K_ESCPREFIX	0x04
+#define KDGKBMETA	0x4B62	/* gets meta key handling mode */
+#define KDSKBMETA	0x4B63	/* sets meta key handling mode */
+
+#define		K_SCROLLLOCK	0x01
+#define		K_NUMLOCK	0x02
+#define		K_CAPSLOCK	0x04
+#define	KDGKBLED	0x4B64	/* get led flags (not lights) */
+#define	KDSKBLED	0x4B65	/* set led flags (not lights) */
+
+struct kbentry {
+	unsigned char kb_table;
+	unsigned char kb_index;
+	unsigned short kb_value;
+};
+#define		K_NORMTAB	0x00
+#define		K_SHIFTTAB	0x01
+#define		K_ALTTAB	0x02
+#define		K_ALTSHIFTTAB	0x03
+
+#define KDGKBENT	0x4B46	/* gets one entry in translation table */
+#define KDSKBENT	0x4B47	/* sets one entry in translation table */
+
+struct kbsentry {
+	unsigned char kb_func;
+	unsigned char kb_string[512];
+};
+#define KDGKBSENT	0x4B48	/* gets one function key string entry */
+#define KDSKBSENT	0x4B49	/* sets one function key string entry */
+
+struct kbdiacr {
+        unsigned char diacr, base, result;
+};
+struct kbdiacrs {
+        unsigned int kb_cnt;    /* number of entries in following array */
+	struct kbdiacr kbdiacr[256];    /* MAX_DIACR from keyboard.h */
+};
+#define KDGKBDIACR      0x4B4A  /* read kernel accent table */
+#define KDSKBDIACR      0x4B4B  /* write kernel accent table */
+
+struct kbdiacruc {
+	unsigned int diacr, base, result;
+};
+struct kbdiacrsuc {
+        unsigned int kb_cnt;    /* number of entries in following array */
+	struct kbdiacruc kbdiacruc[256];    /* MAX_DIACR from keyboard.h */
+};
+#define KDGKBDIACRUC    0x4BFA  /* read kernel accent table - UCS */
+#define KDSKBDIACRUC    0x4BFB  /* write kernel accent table - UCS */
+
+struct kbkeycode {
+	unsigned int scancode, keycode;
+};
+#define KDGETKEYCODE	0x4B4C	/* read kernel keycode table entry */
+#define KDSETKEYCODE	0x4B4D	/* write kernel keycode table entry */
+
+#define KDSIGACCEPT	0x4B4E	/* accept kbd generated signals */
+
+struct kbd_repeat {
+	int delay;	/* in msec; <= 0: don't change */
+	int period;	/* in msec; <= 0: don't change */
+			/* earlier this field was misnamed "rate" */
+};
+
+#define KDKBDREP        0x4B52  /* set keyboard delay/repeat rate;
+				 * actually used values are returned */
+
+#define KDFONTOP	0x4B72	/* font operations */
+
+struct console_font_op {
+	unsigned int op;	/* operation code KD_FONT_OP_* */
+	unsigned int flags;	/* KD_FONT_FLAG_* */
+	unsigned int width, height;	/* font size */
+	unsigned int charcount;
+	unsigned char __user *data;	/* font data with height fixed to 32 */
+};
+
+struct console_font {
+	unsigned int width, height;	/* font size */
+	unsigned int charcount;
+	unsigned char *data;	/* font data with height fixed to 32 */
+};
+
+#define KD_FONT_OP_SET		0	/* Set font */
+#define KD_FONT_OP_GET		1	/* Get font */
+#define KD_FONT_OP_SET_DEFAULT	2	/* Set font to default, data points to name / NULL */
+#define KD_FONT_OP_COPY		3	/* Copy from another console */
+
+#define KD_FONT_FLAG_DONT_RECALC 	1	/* Don't recalculate hw charcell size [compat] */
+#ifdef __KERNEL__
+#define KD_FONT_FLAG_OLD		0x80000000	/* Invoked via old interface [compat] */
+#endif
+
+/* note: 0x4B00-0x4B4E all have had a value at some time;
+   don't reuse for the time being */
+/* note: 0x4B60-0x4B6D, 0x4B70-0x4B72 used above */
+
+#endif /* _LINUX_KD_H */
diff --git a/include/linux/kdb.h b/include/linux/kdb.h
new file mode 100644
index 00000000..06472585
--- /dev/null
+++ b/include/linux/kdb.h
@@ -0,0 +1,169 @@
+#ifndef _KDB_H
+#define _KDB_H
+
+/*
+ * Kernel Debugger Architecture Independent Global Headers
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2000-2007 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (C) 2000 Stephane Eranian <eranian@hpl.hp.com>
+ * Copyright (C) 2009 Jason Wessel <jason.wessel@windriver.com>
+ */
+
+#ifdef	CONFIG_KGDB_KDB
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/atomic.h>
+
+#define KDB_POLL_FUNC_MAX	5
+extern int kdb_poll_idx;
+
+/*
+ * kdb_initial_cpu is initialized to -1, and is set to the cpu
+ * number whenever the kernel debugger is entered.
+ */
+extern int kdb_initial_cpu;
+extern atomic_t kdb_event;
+
+/* Types and messages used for dynamically added kdb shell commands */
+
+#define KDB_MAXARGS    16 /* Maximum number of arguments to a function  */
+
+typedef enum {
+	KDB_REPEAT_NONE = 0,	/* Do not repeat this command */
+	KDB_REPEAT_NO_ARGS,	/* Repeat the command without arguments */
+	KDB_REPEAT_WITH_ARGS,	/* Repeat the command including its arguments */
+} kdb_repeat_t;
+
+typedef int (*kdb_func_t)(int, const char **);
+
+/* KDB return codes from a command or internal kdb function */
+#define KDB_NOTFOUND	(-1)
+#define KDB_ARGCOUNT	(-2)
+#define KDB_BADWIDTH	(-3)
+#define KDB_BADRADIX	(-4)
+#define KDB_NOTENV	(-5)
+#define KDB_NOENVVALUE	(-6)
+#define KDB_NOTIMP	(-7)
+#define KDB_ENVFULL	(-8)
+#define KDB_ENVBUFFULL	(-9)
+#define KDB_TOOMANYBPT	(-10)
+#define KDB_TOOMANYDBREGS (-11)
+#define KDB_DUPBPT	(-12)
+#define KDB_BPTNOTFOUND	(-13)
+#define KDB_BADMODE	(-14)
+#define KDB_BADINT	(-15)
+#define KDB_INVADDRFMT  (-16)
+#define KDB_BADREG      (-17)
+#define KDB_BADCPUNUM   (-18)
+#define KDB_BADLENGTH	(-19)
+#define KDB_NOBP	(-20)
+#define KDB_BADADDR	(-21)
+
+/*
+ * kdb_diemsg
+ *
+ *	Contains a pointer to the last string supplied to the
+ *	kernel 'die' panic function.
+ */
+extern const char *kdb_diemsg;
+
+#define KDB_FLAG_EARLYKDB	(1 << 0) /* set from boot parameter kdb=early */
+#define KDB_FLAG_CATASTROPHIC	(1 << 1) /* A catastrophic event has occurred */
+#define KDB_FLAG_CMD_INTERRUPT	(1 << 2) /* Previous command was interrupted */
+#define KDB_FLAG_NOIPI		(1 << 3) /* Do not send IPIs */
+#define KDB_FLAG_ONLY_DO_DUMP	(1 << 4) /* Only do a dump, used when
+					  * kdb is off */
+#define KDB_FLAG_NO_CONSOLE	(1 << 5) /* No console is available,
+					  * kdb is disabled */
+#define KDB_FLAG_NO_VT_CONSOLE	(1 << 6) /* No VT console is available, do
+					  * not use keyboard */
+#define KDB_FLAG_NO_I8042	(1 << 7) /* No i8042 chip is available, do
+					  * not use keyboard */
+
+extern int kdb_flags;	/* Global flags, see kdb_state for per cpu state */
+
+extern void kdb_save_flags(void);
+extern void kdb_restore_flags(void);
+
+#define KDB_FLAG(flag)		(kdb_flags & KDB_FLAG_##flag)
+#define KDB_FLAG_SET(flag)	((void)(kdb_flags |= KDB_FLAG_##flag))
+#define KDB_FLAG_CLEAR(flag)	((void)(kdb_flags &= ~KDB_FLAG_##flag))
+
+/*
+ * External entry point for the kernel debugger.  The pt_regs
+ * at the time of entry are supplied along with the reason for
+ * entry to the kernel debugger.
+ */
+
+typedef enum {
+	KDB_REASON_ENTER = 1,	/* KDB_ENTER() trap/fault - regs valid */
+	KDB_REASON_ENTER_SLAVE,	/* KDB_ENTER_SLAVE() trap/fault - regs valid */
+	KDB_REASON_BREAK,	/* Breakpoint inst. - regs valid */
+	KDB_REASON_DEBUG,	/* Debug Fault - regs valid */
+	KDB_REASON_OOPS,	/* Kernel Oops - regs valid */
+	KDB_REASON_SWITCH,	/* CPU switch - regs valid*/
+	KDB_REASON_KEYBOARD,	/* Keyboard entry - regs valid */
+	KDB_REASON_NMI,		/* Non-maskable interrupt; regs valid */
+	KDB_REASON_RECURSE,	/* Recursive entry to kdb;
+				 * regs probably valid */
+	KDB_REASON_SSTEP,	/* Single Step trap. - regs valid */
+} kdb_reason_t;
+
+extern int kdb_trap_printk;
+extern __printf(1, 0) int vkdb_printf(const char *fmt, va_list args);
+extern __printf(1, 2) int kdb_printf(const char *, ...);
+typedef __printf(1, 2) int (*kdb_printf_t)(const char *, ...);
+
+extern void kdb_init(int level);
+
+/* Access to kdb specific polling devices */
+typedef int (*get_char_func)(void);
+extern get_char_func kdb_poll_funcs[];
+extern int kdb_get_kbd_char(void);
+
+static inline
+int kdb_process_cpu(const struct task_struct *p)
+{
+	unsigned int cpu = task_thread_info(p)->cpu;
+	if (cpu > num_possible_cpus())
+		cpu = 0;
+	return cpu;
+}
+
+/* kdb access to register set for stack dumping */
+extern struct pt_regs *kdb_current_regs;
+#ifdef CONFIG_KALLSYMS
+extern const char *kdb_walk_kallsyms(loff_t *pos);
+#else /* ! CONFIG_KALLSYMS */
+static inline const char *kdb_walk_kallsyms(loff_t *pos)
+{
+	return NULL;
+}
+#endif /* ! CONFIG_KALLSYMS */
+
+/* Dynamic kdb shell command registration */
+extern int kdb_register(char *, kdb_func_t, char *, char *, short);
+extern int kdb_register_repeat(char *, kdb_func_t, char *, char *,
+			       short, kdb_repeat_t);
+extern int kdb_unregister(char *);
+#else /* ! CONFIG_KGDB_KDB */
+#define kdb_printf(...)
+#define kdb_init(x)
+#define kdb_register(...)
+#define kdb_register_repeat(...)
+#define kdb_uregister(x)
+#endif	/* CONFIG_KGDB_KDB */
+enum {
+	KDB_NOT_INITIALIZED,
+	KDB_INIT_EARLY,
+	KDB_INIT_FULL,
+};
+
+extern int kdbgetintenv(const char *, int *);
+extern int kdb_set(int, const char **);
+
+#endif	/* !_KDB_H */
diff --git a/include/linux/kdebug.h b/include/linux/kdebug.h
new file mode 100644
index 00000000..ed815090
--- /dev/null
+++ b/include/linux/kdebug.h
@@ -0,0 +1,22 @@
+#ifndef _LINUX_KDEBUG_H
+#define _LINUX_KDEBUG_H
+
+#include <asm/kdebug.h>
+
+struct notifier_block;
+
+struct die_args {
+	struct pt_regs *regs;
+	const char *str;
+	long err;
+	int trapnr;
+	int signr;
+};
+
+int register_die_notifier(struct notifier_block *nb);
+int unregister_die_notifier(struct notifier_block *nb);
+
+int notify_die(enum die_val val, const char *str,
+	       struct pt_regs *regs, long err, int trap, int sig);
+
+#endif /* _LINUX_KDEBUG_H */
diff --git a/include/linux/kdev_t.h b/include/linux/kdev_t.h
new file mode 100644
index 00000000..2dacab8b
--- /dev/null
+++ b/include/linux/kdev_t.h
@@ -0,0 +1,100 @@
+#ifndef _LINUX_KDEV_T_H
+#define _LINUX_KDEV_T_H
+#ifdef __KERNEL__
+#define MINORBITS	20
+#define MINORMASK	((1U << MINORBITS) - 1)
+
+#define MAJOR(dev)	((unsigned int) ((dev) >> MINORBITS))
+#define MINOR(dev)	((unsigned int) ((dev) & MINORMASK))
+#define MKDEV(ma,mi)	(((ma) << MINORBITS) | (mi))
+
+#define print_dev_t(buffer, dev)					\
+	sprintf((buffer), "%u:%u\n", MAJOR(dev), MINOR(dev))
+
+#define format_dev_t(buffer, dev)					\
+	({								\
+		sprintf(buffer, "%u:%u", MAJOR(dev), MINOR(dev));	\
+		buffer;							\
+	})
+
+/* acceptable for old filesystems */
+static inline int old_valid_dev(dev_t dev)
+{
+	return MAJOR(dev) < 256 && MINOR(dev) < 256;
+}
+
+static inline u16 old_encode_dev(dev_t dev)
+{
+	return (MAJOR(dev) << 8) | MINOR(dev);
+}
+
+static inline dev_t old_decode_dev(u16 val)
+{
+	return MKDEV((val >> 8) & 255, val & 255);
+}
+
+static inline int new_valid_dev(dev_t dev)
+{
+	return 1;
+}
+
+static inline u32 new_encode_dev(dev_t dev)
+{
+	unsigned major = MAJOR(dev);
+	unsigned minor = MINOR(dev);
+	return (minor & 0xff) | (major << 8) | ((minor & ~0xff) << 12);
+}
+
+static inline dev_t new_decode_dev(u32 dev)
+{
+	unsigned major = (dev & 0xfff00) >> 8;
+	unsigned minor = (dev & 0xff) | ((dev >> 12) & 0xfff00);
+	return MKDEV(major, minor);
+}
+
+static inline int huge_valid_dev(dev_t dev)
+{
+	return 1;
+}
+
+static inline u64 huge_encode_dev(dev_t dev)
+{
+	return new_encode_dev(dev);
+}
+
+static inline dev_t huge_decode_dev(u64 dev)
+{
+	return new_decode_dev(dev);
+}
+
+static inline int sysv_valid_dev(dev_t dev)
+{
+	return MAJOR(dev) < (1<<14) && MINOR(dev) < (1<<18);
+}
+
+static inline u32 sysv_encode_dev(dev_t dev)
+{
+	return MINOR(dev) | (MAJOR(dev) << 18);
+}
+
+static inline unsigned sysv_major(u32 dev)
+{
+	return (dev >> 18) & 0x3fff;
+}
+
+static inline unsigned sysv_minor(u32 dev)
+{
+	return dev & 0x3ffff;
+}
+
+#else /* __KERNEL__ */
+
+/*
+Some programs want their definitions of MAJOR and MINOR and MKDEV
+from the kernel sources. These must be the externally visible ones.
+*/
+#define MAJOR(dev)	((dev)>>8)
+#define MINOR(dev)	((dev) & 0xff)
+#define MKDEV(ma,mi)	((ma)<<8 | (mi))
+#endif /* __KERNEL__ */
+#endif
diff --git a/include/linux/kernel-page-flags.h b/include/linux/kernel-page-flags.h
new file mode 100644
index 00000000..a1bdf696
--- /dev/null
+++ b/include/linux/kernel-page-flags.h
@@ -0,0 +1,51 @@
+#ifndef LINUX_KERNEL_PAGE_FLAGS_H
+#define LINUX_KERNEL_PAGE_FLAGS_H
+
+/*
+ * Stable page flag bits exported to user space
+ */
+
+#define KPF_LOCKED		0
+#define KPF_ERROR		1
+#define KPF_REFERENCED		2
+#define KPF_UPTODATE		3
+#define KPF_DIRTY		4
+#define KPF_LRU			5
+#define KPF_ACTIVE		6
+#define KPF_SLAB		7
+#define KPF_WRITEBACK		8
+#define KPF_RECLAIM		9
+#define KPF_BUDDY		10
+
+/* 11-20: new additions in 2.6.31 */
+#define KPF_MMAP		11
+#define KPF_ANON		12
+#define KPF_SWAPCACHE		13
+#define KPF_SWAPBACKED		14
+#define KPF_COMPOUND_HEAD	15
+#define KPF_COMPOUND_TAIL	16
+#define KPF_HUGE		17
+#define KPF_UNEVICTABLE		18
+#define KPF_HWPOISON		19
+#define KPF_NOPAGE		20
+
+#define KPF_KSM			21
+#define KPF_THP			22
+
+#ifdef __KERNEL__
+
+/* kernel hacking assistances
+ * WARNING: subject to change, never rely on them!
+ */
+#define KPF_RESERVED		32
+#define KPF_MLOCKED		33
+#define KPF_MAPPEDTODISK	34
+#define KPF_PRIVATE		35
+#define KPF_PRIVATE_2		36
+#define KPF_OWNER_PRIVATE	37
+#define KPF_ARCH		38
+#define KPF_UNCACHED		39
+
+#endif /* __KERNEL__ */
+
+#endif /* LINUX_KERNEL_PAGE_FLAGS_H */
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
new file mode 100644
index 00000000..747404ab
--- /dev/null
+++ b/include/linux/kernel.h
@@ -0,0 +1,713 @@
+#ifndef _LINUX_KERNEL_H
+#define _LINUX_KERNEL_H
+
+#include <linux/sysinfo.h>
+
+/*
+ * 'kernel.h' contains some often-used function prototypes etc
+ */
+#define __ALIGN_KERNEL(x, a)		__ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1)
+#define __ALIGN_KERNEL_MASK(x, mask)	(((x) + (mask)) & ~(mask))
+
+#ifdef __KERNEL__
+
+#include <stdarg.h>
+#include <linux/linkage.h>
+#include <linux/stddef.h>
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/bitops.h>
+#include <linux/log2.h>
+#include <linux/typecheck.h>
+#include <linux/printk.h>
+#include <linux/dynamic_debug.h>
+#include <asm/byteorder.h>
+
+#define USHRT_MAX	((u16)(~0U))
+#define SHRT_MAX	((s16)(USHRT_MAX>>1))
+#define SHRT_MIN	((s16)(-SHRT_MAX - 1))
+#define INT_MAX		((int)(~0U>>1))
+#define INT_MIN		(-INT_MAX - 1)
+#define UINT_MAX	(~0U)
+#define LONG_MAX	((long)(~0UL>>1))
+#define LONG_MIN	(-LONG_MAX - 1)
+#define ULONG_MAX	(~0UL)
+#define LLONG_MAX	((long long)(~0ULL>>1))
+#define LLONG_MIN	(-LLONG_MAX - 1)
+#define ULLONG_MAX	(~0ULL)
+
+#define STACK_MAGIC	0xdeadbeef
+
+#define ALIGN(x, a)		__ALIGN_KERNEL((x), (a))
+#define __ALIGN_MASK(x, mask)	__ALIGN_KERNEL_MASK((x), (mask))
+#define PTR_ALIGN(p, a)		((typeof(p))ALIGN((unsigned long)(p), (a)))
+#define IS_ALIGNED(x, a)		(((x) & ((typeof(x))(a) - 1)) == 0)
+
+#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]) + __must_be_array(arr))
+
+/*
+ * This looks more complex than it should be. But we need to
+ * get the type for the ~ right in round_down (it needs to be
+ * as wide as the result!), and we want to evaluate the macro
+ * arguments just once each.
+ */
+#define __round_mask(x, y) ((__typeof__(x))((y)-1))
+#define round_up(x, y) ((((x)-1) | __round_mask(x, y))+1)
+#define round_down(x, y) ((x) & ~__round_mask(x, y))
+
+#define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f))
+#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
+#define DIV_ROUND_UP_ULL(ll,d) \
+	({ unsigned long long _tmp = (ll)+(d)-1; do_div(_tmp, d); _tmp; })
+
+#if BITS_PER_LONG == 32
+# define DIV_ROUND_UP_SECTOR_T(ll,d) DIV_ROUND_UP_ULL(ll, d)
+#else
+# define DIV_ROUND_UP_SECTOR_T(ll,d) DIV_ROUND_UP(ll,d)
+#endif
+
+/* The `const' in roundup() prevents gcc-3.3 from calling __divdi3 */
+#define roundup(x, y) (					\
+{							\
+	const typeof(y) __y = y;			\
+	(((x) + (__y - 1)) / __y) * __y;		\
+}							\
+)
+#define rounddown(x, y) (				\
+{							\
+	typeof(x) __x = (x);				\
+	__x - (__x % (y));				\
+}							\
+)
+#define DIV_ROUND_CLOSEST(x, divisor)(			\
+{							\
+	typeof(divisor) __divisor = divisor;		\
+	(((x) + ((__divisor) / 2)) / (__divisor));	\
+}							\
+)
+
+/*
+ * Multiplies an integer by a fraction, while avoiding unnecessary
+ * overflow or loss of precision.
+ */
+#define mult_frac(x, numer, denom)(			\
+{							\
+	typeof(x) quot = (x) / (denom);			\
+	typeof(x) rem  = (x) % (denom);			\
+	(quot * (numer)) + ((rem * (numer)) / (denom));	\
+}							\
+)
+
+
+#define _RET_IP_		(unsigned long)__builtin_return_address(0)
+#define _THIS_IP_  ({ __label__ __here; __here: (unsigned long)&&__here; })
+
+#ifdef CONFIG_LBDAF
+# include <asm/div64.h>
+# define sector_div(a, b) do_div(a, b)
+#else
+# define sector_div(n, b)( \
+{ \
+	int _res; \
+	_res = (n) % (b); \
+	(n) /= (b); \
+	_res; \
+} \
+)
+#endif
+
+/**
+ * upper_32_bits - return bits 32-63 of a number
+ * @n: the number we're accessing
+ *
+ * A basic shift-right of a 64- or 32-bit quantity.  Use this to suppress
+ * the "right shift count >= width of type" warning when that quantity is
+ * 32-bits.
+ */
+#define upper_32_bits(n) ((u32)(((n) >> 16) >> 16))
+
+/**
+ * lower_32_bits - return bits 0-31 of a number
+ * @n: the number we're accessing
+ */
+#define lower_32_bits(n) ((u32)(n))
+
+struct completion;
+struct pt_regs;
+struct user;
+
+#ifdef CONFIG_PREEMPT_VOLUNTARY
+extern int _cond_resched(void);
+# define might_resched() _cond_resched()
+#else
+# define might_resched() do { } while (0)
+#endif
+
+#ifdef CONFIG_DEBUG_ATOMIC_SLEEP
+  void __might_sleep(const char *file, int line, int preempt_offset);
+/**
+ * might_sleep - annotation for functions that can sleep
+ *
+ * this macro will print a stack trace if it is executed in an atomic
+ * context (spinlock, irq-handler, ...).
+ *
+ * This is a useful debugging help to be able to catch problems early and not
+ * be bitten later when the calling function happens to sleep when it is not
+ * supposed to.
+ */
+# define might_sleep() \
+	do { __might_sleep(__FILE__, __LINE__, 0); might_resched(); } while (0)
+#else
+  static inline void __might_sleep(const char *file, int line,
+				   int preempt_offset) { }
+# define might_sleep() do { might_resched(); } while (0)
+#endif
+
+#define might_sleep_if(cond) do { if (cond) might_sleep(); } while (0)
+
+/*
+ * abs() handles unsigned and signed longs, ints, shorts and chars.  For all
+ * input types abs() returns a signed long.
+ * abs() should not be used for 64-bit types (s64, u64, long long) - use abs64()
+ * for those.
+ */
+#define abs(x) ({						\
+		long ret;					\
+		if (sizeof(x) == sizeof(long)) {		\
+			long __x = (x);				\
+			ret = (__x < 0) ? -__x : __x;		\
+		} else {					\
+			int __x = (x);				\
+			ret = (__x < 0) ? -__x : __x;		\
+		}						\
+		ret;						\
+	})
+
+#define abs64(x) ({				\
+		s64 __x = (x);			\
+		(__x < 0) ? -__x : __x;		\
+	})
+
+#ifdef CONFIG_PROVE_LOCKING
+void might_fault(void);
+#else
+static inline void might_fault(void)
+{
+	might_sleep();
+}
+#endif
+
+extern struct atomic_notifier_head panic_notifier_list;
+extern long (*panic_blink)(int state);
+__printf(1, 2)
+void panic(const char *fmt, ...)
+	__noreturn __cold;
+extern void oops_enter(void);
+extern void oops_exit(void);
+void print_oops_end_marker(void);
+extern int oops_may_print(void);
+void do_exit(long error_code)
+	__noreturn;
+void complete_and_exit(struct completion *, long)
+	__noreturn;
+
+/* Internal, do not use. */
+int __must_check _kstrtoul(const char *s, unsigned int base, unsigned long *res);
+int __must_check _kstrtol(const char *s, unsigned int base, long *res);
+
+int __must_check kstrtoull(const char *s, unsigned int base, unsigned long long *res);
+int __must_check kstrtoll(const char *s, unsigned int base, long long *res);
+static inline int __must_check kstrtoul(const char *s, unsigned int base, unsigned long *res)
+{
+	/*
+	 * We want to shortcut function call, but
+	 * __builtin_types_compatible_p(unsigned long, unsigned long long) = 0.
+	 */
+	if (sizeof(unsigned long) == sizeof(unsigned long long) &&
+	    __alignof__(unsigned long) == __alignof__(unsigned long long))
+		return kstrtoull(s, base, (unsigned long long *)res);
+	else
+		return _kstrtoul(s, base, res);
+}
+
+static inline int __must_check kstrtol(const char *s, unsigned int base, long *res)
+{
+	/*
+	 * We want to shortcut function call, but
+	 * __builtin_types_compatible_p(long, long long) = 0.
+	 */
+	if (sizeof(long) == sizeof(long long) &&
+	    __alignof__(long) == __alignof__(long long))
+		return kstrtoll(s, base, (long long *)res);
+	else
+		return _kstrtol(s, base, res);
+}
+
+int __must_check kstrtouint(const char *s, unsigned int base, unsigned int *res);
+int __must_check kstrtoint(const char *s, unsigned int base, int *res);
+
+static inline int __must_check kstrtou64(const char *s, unsigned int base, u64 *res)
+{
+	return kstrtoull(s, base, res);
+}
+
+static inline int __must_check kstrtos64(const char *s, unsigned int base, s64 *res)
+{
+	return kstrtoll(s, base, res);
+}
+
+static inline int __must_check kstrtou32(const char *s, unsigned int base, u32 *res)
+{
+	return kstrtouint(s, base, res);
+}
+
+static inline int __must_check kstrtos32(const char *s, unsigned int base, s32 *res)
+{
+	return kstrtoint(s, base, res);
+}
+
+int __must_check kstrtou16(const char *s, unsigned int base, u16 *res);
+int __must_check kstrtos16(const char *s, unsigned int base, s16 *res);
+int __must_check kstrtou8(const char *s, unsigned int base, u8 *res);
+int __must_check kstrtos8(const char *s, unsigned int base, s8 *res);
+
+int __must_check kstrtoull_from_user(const char __user *s, size_t count, unsigned int base, unsigned long long *res);
+int __must_check kstrtoll_from_user(const char __user *s, size_t count, unsigned int base, long long *res);
+int __must_check kstrtoul_from_user(const char __user *s, size_t count, unsigned int base, unsigned long *res);
+int __must_check kstrtol_from_user(const char __user *s, size_t count, unsigned int base, long *res);
+int __must_check kstrtouint_from_user(const char __user *s, size_t count, unsigned int base, unsigned int *res);
+int __must_check kstrtoint_from_user(const char __user *s, size_t count, unsigned int base, int *res);
+int __must_check kstrtou16_from_user(const char __user *s, size_t count, unsigned int base, u16 *res);
+int __must_check kstrtos16_from_user(const char __user *s, size_t count, unsigned int base, s16 *res);
+int __must_check kstrtou8_from_user(const char __user *s, size_t count, unsigned int base, u8 *res);
+int __must_check kstrtos8_from_user(const char __user *s, size_t count, unsigned int base, s8 *res);
+
+static inline int __must_check kstrtou64_from_user(const char __user *s, size_t count, unsigned int base, u64 *res)
+{
+	return kstrtoull_from_user(s, count, base, res);
+}
+
+static inline int __must_check kstrtos64_from_user(const char __user *s, size_t count, unsigned int base, s64 *res)
+{
+	return kstrtoll_from_user(s, count, base, res);
+}
+
+static inline int __must_check kstrtou32_from_user(const char __user *s, size_t count, unsigned int base, u32 *res)
+{
+	return kstrtouint_from_user(s, count, base, res);
+}
+
+static inline int __must_check kstrtos32_from_user(const char __user *s, size_t count, unsigned int base, s32 *res)
+{
+	return kstrtoint_from_user(s, count, base, res);
+}
+
+/* Obsolete, do not use.  Use kstrto<foo> instead */
+
+extern unsigned long simple_strtoul(const char *,char **,unsigned int);
+extern long simple_strtol(const char *,char **,unsigned int);
+extern unsigned long long simple_strtoull(const char *,char **,unsigned int);
+extern long long simple_strtoll(const char *,char **,unsigned int);
+#define strict_strtoul	kstrtoul
+#define strict_strtol	kstrtol
+#define strict_strtoull	kstrtoull
+#define strict_strtoll	kstrtoll
+
+extern int num_to_str(char *buf, int size, unsigned long long num);
+
+/* lib/printf utilities */
+
+extern __printf(2, 3) int sprintf(char *buf, const char * fmt, ...);
+extern __printf(2, 0) int vsprintf(char *buf, const char *, va_list);
+extern __printf(3, 4)
+int snprintf(char *buf, size_t size, const char *fmt, ...);
+extern __printf(3, 0)
+int vsnprintf(char *buf, size_t size, const char *fmt, va_list args);
+extern __printf(3, 4)
+int scnprintf(char *buf, size_t size, const char *fmt, ...);
+extern __printf(3, 0)
+int vscnprintf(char *buf, size_t size, const char *fmt, va_list args);
+extern __printf(2, 3)
+char *kasprintf(gfp_t gfp, const char *fmt, ...);
+extern char *kvasprintf(gfp_t gfp, const char *fmt, va_list args);
+
+extern __scanf(2, 3)
+int sscanf(const char *, const char *, ...);
+extern __scanf(2, 0)
+int vsscanf(const char *, const char *, va_list);
+
+extern int get_option(char **str, int *pint);
+extern char *get_options(const char *str, int nints, int *ints);
+extern unsigned long long memparse(const char *ptr, char **retptr);
+
+extern int core_kernel_text(unsigned long addr);
+extern int core_kernel_data(unsigned long addr);
+extern int __kernel_text_address(unsigned long addr);
+extern int kernel_text_address(unsigned long addr);
+extern int func_ptr_is_kernel_text(void *ptr);
+
+struct pid;
+extern struct pid *session_of_pgrp(struct pid *pgrp);
+
+unsigned long int_sqrt(unsigned long);
+
+extern void bust_spinlocks(int yes);
+extern void wake_up_klogd(void);
+extern int oops_in_progress;		/* If set, an oops, panic(), BUG() or die() is in progress */
+extern int panic_timeout;
+extern int panic_on_oops;
+extern int panic_on_unrecovered_nmi;
+extern int panic_on_io_nmi;
+extern int sysctl_panic_on_stackoverflow;
+extern const char *print_tainted(void);
+extern void add_taint(unsigned flag);
+extern int test_taint(unsigned flag);
+extern unsigned long get_taint(void);
+extern int root_mountflags;
+
+extern bool early_boot_irqs_disabled;
+
+/* Values used for system_state */
+extern enum system_states {
+	SYSTEM_BOOTING,
+	SYSTEM_RUNNING,
+	SYSTEM_HALT,
+	SYSTEM_POWER_OFF,
+	SYSTEM_RESTART,
+	SYSTEM_SUSPEND_DISK,
+} system_state;
+
+#define TAINT_PROPRIETARY_MODULE	0
+#define TAINT_FORCED_MODULE		1
+#define TAINT_UNSAFE_SMP		2
+#define TAINT_FORCED_RMMOD		3
+#define TAINT_MACHINE_CHECK		4
+#define TAINT_BAD_PAGE			5
+#define TAINT_USER			6
+#define TAINT_DIE			7
+#define TAINT_OVERRIDDEN_ACPI_TABLE	8
+#define TAINT_WARN			9
+#define TAINT_CRAP			10
+#define TAINT_FIRMWARE_WORKAROUND	11
+#define TAINT_OOT_MODULE		12
+
+extern const char hex_asc[];
+#define hex_asc_lo(x)	hex_asc[((x) & 0x0f)]
+#define hex_asc_hi(x)	hex_asc[((x) & 0xf0) >> 4]
+
+static inline char *hex_byte_pack(char *buf, u8 byte)
+{
+	*buf++ = hex_asc_hi(byte);
+	*buf++ = hex_asc_lo(byte);
+	return buf;
+}
+
+static inline char * __deprecated pack_hex_byte(char *buf, u8 byte)
+{
+	return hex_byte_pack(buf, byte);
+}
+
+extern int hex_to_bin(char ch);
+extern int __must_check hex2bin(u8 *dst, const char *src, size_t count);
+
+/*
+ * General tracing related utility functions - trace_printk(),
+ * tracing_on/tracing_off and tracing_start()/tracing_stop
+ *
+ * Use tracing_on/tracing_off when you want to quickly turn on or off
+ * tracing. It simply enables or disables the recording of the trace events.
+ * This also corresponds to the user space /sys/kernel/debug/tracing/tracing_on
+ * file, which gives a means for the kernel and userspace to interact.
+ * Place a tracing_off() in the kernel where you want tracing to end.
+ * From user space, examine the trace, and then echo 1 > tracing_on
+ * to continue tracing.
+ *
+ * tracing_stop/tracing_start has slightly more overhead. It is used
+ * by things like suspend to ram where disabling the recording of the
+ * trace is not enough, but tracing must actually stop because things
+ * like calling smp_processor_id() may crash the system.
+ *
+ * Most likely, you want to use tracing_on/tracing_off.
+ */
+#ifdef CONFIG_RING_BUFFER
+/* trace_off_permanent stops recording with no way to bring it back */
+void tracing_off_permanent(void);
+#else
+static inline void tracing_off_permanent(void) { }
+#endif
+
+enum ftrace_dump_mode {
+	DUMP_NONE,
+	DUMP_ALL,
+	DUMP_ORIG,
+};
+
+#ifdef CONFIG_TRACING
+void tracing_on(void);
+void tracing_off(void);
+int tracing_is_on(void);
+
+extern void tracing_start(void);
+extern void tracing_stop(void);
+extern void ftrace_off_permanent(void);
+
+static inline __printf(1, 2)
+void ____trace_printk_check_format(const char *fmt, ...)
+{
+}
+#define __trace_printk_check_format(fmt, args...)			\
+do {									\
+	if (0)								\
+		____trace_printk_check_format(fmt, ##args);		\
+} while (0)
+
+/**
+ * trace_printk - printf formatting in the ftrace buffer
+ * @fmt: the printf format for printing
+ *
+ * Note: __trace_printk is an internal function for trace_printk and
+ *       the @ip is passed in via the trace_printk macro.
+ *
+ * This function allows a kernel developer to debug fast path sections
+ * that printk is not appropriate for. By scattering in various
+ * printk like tracing in the code, a developer can quickly see
+ * where problems are occurring.
+ *
+ * This is intended as a debugging tool for the developer only.
+ * Please refrain from leaving trace_printks scattered around in
+ * your code.
+ */
+
+#define trace_printk(fmt, args...)					\
+do {									\
+	__trace_printk_check_format(fmt, ##args);			\
+	if (__builtin_constant_p(fmt)) {				\
+		static const char *trace_printk_fmt			\
+		  __attribute__((section("__trace_printk_fmt"))) =	\
+			__builtin_constant_p(fmt) ? fmt : NULL;		\
+									\
+		__trace_bprintk(_THIS_IP_, trace_printk_fmt, ##args);	\
+	} else								\
+		__trace_printk(_THIS_IP_, fmt, ##args);		\
+} while (0)
+
+extern __printf(2, 3)
+int __trace_bprintk(unsigned long ip, const char *fmt, ...);
+
+extern __printf(2, 3)
+int __trace_printk(unsigned long ip, const char *fmt, ...);
+
+extern void trace_dump_stack(void);
+
+/*
+ * The double __builtin_constant_p is because gcc will give us an error
+ * if we try to allocate the static variable to fmt if it is not a
+ * constant. Even with the outer if statement.
+ */
+#define ftrace_vprintk(fmt, vargs)					\
+do {									\
+	if (__builtin_constant_p(fmt)) {				\
+		static const char *trace_printk_fmt			\
+		  __attribute__((section("__trace_printk_fmt"))) =	\
+			__builtin_constant_p(fmt) ? fmt : NULL;		\
+									\
+		__ftrace_vbprintk(_THIS_IP_, trace_printk_fmt, vargs);	\
+	} else								\
+		__ftrace_vprintk(_THIS_IP_, fmt, vargs);		\
+} while (0)
+
+extern int
+__ftrace_vbprintk(unsigned long ip, const char *fmt, va_list ap);
+
+extern int
+__ftrace_vprintk(unsigned long ip, const char *fmt, va_list ap);
+
+extern void ftrace_dump(enum ftrace_dump_mode oops_dump_mode);
+#else
+static inline __printf(1, 2)
+int trace_printk(const char *fmt, ...);
+
+static inline void tracing_start(void) { }
+static inline void tracing_stop(void) { }
+static inline void ftrace_off_permanent(void) { }
+static inline void trace_dump_stack(void) { }
+
+static inline void tracing_on(void) { }
+static inline void tracing_off(void) { }
+static inline int tracing_is_on(void) { return 0; }
+
+static inline int
+trace_printk(const char *fmt, ...)
+{
+	return 0;
+}
+static inline int
+ftrace_vprintk(const char *fmt, va_list ap)
+{
+	return 0;
+}
+static inline void ftrace_dump(enum ftrace_dump_mode oops_dump_mode) { }
+#endif /* CONFIG_TRACING */
+
+/*
+ * min()/max()/clamp() macros that also do
+ * strict type-checking.. See the
+ * "unnecessary" pointer comparison.
+ */
+#define min(x, y) ({				\
+	typeof(x) _min1 = (x);			\
+	typeof(y) _min2 = (y);			\
+	(void) (&_min1 == &_min2);		\
+	_min1 < _min2 ? _min1 : _min2; })
+
+#define max(x, y) ({				\
+	typeof(x) _max1 = (x);			\
+	typeof(y) _max2 = (y);			\
+	(void) (&_max1 == &_max2);		\
+	_max1 > _max2 ? _max1 : _max2; })
+
+#define min3(x, y, z) ({			\
+	typeof(x) _min1 = (x);			\
+	typeof(y) _min2 = (y);			\
+	typeof(z) _min3 = (z);			\
+	(void) (&_min1 == &_min2);		\
+	(void) (&_min1 == &_min3);		\
+	_min1 < _min2 ? (_min1 < _min3 ? _min1 : _min3) : \
+		(_min2 < _min3 ? _min2 : _min3); })
+
+#define max3(x, y, z) ({			\
+	typeof(x) _max1 = (x);			\
+	typeof(y) _max2 = (y);			\
+	typeof(z) _max3 = (z);			\
+	(void) (&_max1 == &_max2);		\
+	(void) (&_max1 == &_max3);		\
+	_max1 > _max2 ? (_max1 > _max3 ? _max1 : _max3) : \
+		(_max2 > _max3 ? _max2 : _max3); })
+
+/**
+ * min_not_zero - return the minimum that is _not_ zero, unless both are zero
+ * @x: value1
+ * @y: value2
+ */
+#define min_not_zero(x, y) ({			\
+	typeof(x) __x = (x);			\
+	typeof(y) __y = (y);			\
+	__x == 0 ? __y : ((__y == 0) ? __x : min(__x, __y)); })
+
+/**
+ * clamp - return a value clamped to a given range with strict typechecking
+ * @val: current value
+ * @min: minimum allowable value
+ * @max: maximum allowable value
+ *
+ * This macro does strict typechecking of min/max to make sure they are of the
+ * same type as val.  See the unnecessary pointer comparisons.
+ */
+#define clamp(val, min, max) ({			\
+	typeof(val) __val = (val);		\
+	typeof(min) __min = (min);		\
+	typeof(max) __max = (max);		\
+	(void) (&__val == &__min);		\
+	(void) (&__val == &__max);		\
+	__val = __val < __min ? __min: __val;	\
+	__val > __max ? __max: __val; })
+
+/*
+ * ..and if you can't take the strict
+ * types, you can specify one yourself.
+ *
+ * Or not use min/max/clamp at all, of course.
+ */
+#define min_t(type, x, y) ({			\
+	type __min1 = (x);			\
+	type __min2 = (y);			\
+	__min1 < __min2 ? __min1: __min2; })
+
+#define max_t(type, x, y) ({			\
+	type __max1 = (x);			\
+	type __max2 = (y);			\
+	__max1 > __max2 ? __max1: __max2; })
+
+/**
+ * clamp_t - return a value clamped to a given range using a given type
+ * @type: the type of variable to use
+ * @val: current value
+ * @min: minimum allowable value
+ * @max: maximum allowable value
+ *
+ * This macro does no typechecking and uses temporary variables of type
+ * 'type' to make all the comparisons.
+ */
+#define clamp_t(type, val, min, max) ({		\
+	type __val = (val);			\
+	type __min = (min);			\
+	type __max = (max);			\
+	__val = __val < __min ? __min: __val;	\
+	__val > __max ? __max: __val; })
+
+/**
+ * clamp_val - return a value clamped to a given range using val's type
+ * @val: current value
+ * @min: minimum allowable value
+ * @max: maximum allowable value
+ *
+ * This macro does no typechecking and uses temporary variables of whatever
+ * type the input argument 'val' is.  This is useful when val is an unsigned
+ * type and min and max are literals that will otherwise be assigned a signed
+ * integer type.
+ */
+#define clamp_val(val, min, max) ({		\
+	typeof(val) __val = (val);		\
+	typeof(val) __min = (min);		\
+	typeof(val) __max = (max);		\
+	__val = __val < __min ? __min: __val;	\
+	__val > __max ? __max: __val; })
+
+
+/*
+ * swap - swap value of @a and @b
+ */
+#define swap(a, b) \
+	do { typeof(a) __tmp = (a); (a) = (b); (b) = __tmp; } while (0)
+
+/**
+ * container_of - cast a member of a structure out to the containing structure
+ * @ptr:	the pointer to the member.
+ * @type:	the type of the container struct this is embedded in.
+ * @member:	the name of the member within the struct.
+ *
+ */
+#define container_of(ptr, type, member) ({			\
+	const typeof( ((type *)0)->member ) *__mptr = (ptr);	\
+	(type *)( (char *)__mptr - offsetof(type,member) );})
+
+/* Trap pasters of __FUNCTION__ at compile-time */
+#define __FUNCTION__ (__func__)
+
+/* This helps us to avoid #ifdef CONFIG_NUMA */
+#ifdef CONFIG_NUMA
+#define NUMA_BUILD 1
+#else
+#define NUMA_BUILD 0
+#endif
+
+/* This helps us avoid #ifdef CONFIG_COMPACTION */
+#ifdef CONFIG_COMPACTION
+#define COMPACTION_BUILD 1
+#else
+#define COMPACTION_BUILD 0
+#endif
+
+/* Rebuild everything on CONFIG_FTRACE_MCOUNT_RECORD */
+#ifdef CONFIG_FTRACE_MCOUNT_RECORD
+# define REBUILD_DUE_TO_FTRACE_MCOUNT_RECORD
+#endif
+
+extern int do_sysinfo(struct sysinfo *info);
+
+/* To identify board information in panic logs, set this */
+extern char *mach_panic_string;
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/linux/kernel_stat.h b/include/linux/kernel_stat.h
new file mode 100644
index 00000000..2fbd9053
--- /dev/null
+++ b/include/linux/kernel_stat.h
@@ -0,0 +1,133 @@
+#ifndef _LINUX_KERNEL_STAT_H
+#define _LINUX_KERNEL_STAT_H
+
+#include <linux/smp.h>
+#include <linux/threads.h>
+#include <linux/percpu.h>
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <asm/irq.h>
+#include <asm/cputime.h>
+
+/*
+ * 'kernel_stat.h' contains the definitions needed for doing
+ * some kernel statistics (CPU usage, context switches ...),
+ * used by rstatd/perfmeter
+ */
+
+enum cpu_usage_stat {
+	CPUTIME_USER,
+	CPUTIME_NICE,
+	CPUTIME_SYSTEM,
+	CPUTIME_SOFTIRQ,
+	CPUTIME_IRQ,
+	CPUTIME_IDLE,
+	CPUTIME_IOWAIT,
+	CPUTIME_STEAL,
+	CPUTIME_GUEST,
+	CPUTIME_GUEST_NICE,
+	NR_STATS,
+};
+
+struct kernel_cpustat {
+	u64 cpustat[NR_STATS];
+};
+
+struct kernel_stat {
+#ifndef CONFIG_GENERIC_HARDIRQS
+       unsigned int irqs[NR_IRQS];
+#endif
+	unsigned long irqs_sum;
+	unsigned int softirqs[NR_SOFTIRQS];
+};
+
+DECLARE_PER_CPU(struct kernel_stat, kstat);
+DECLARE_PER_CPU(struct kernel_cpustat, kernel_cpustat);
+
+/* Must have preemption disabled for this to be meaningful. */
+#define kstat_this_cpu (&__get_cpu_var(kstat))
+#define kcpustat_this_cpu (&__get_cpu_var(kernel_cpustat))
+#define kstat_cpu(cpu) per_cpu(kstat, cpu)
+#define kcpustat_cpu(cpu) per_cpu(kernel_cpustat, cpu)
+
+extern unsigned long long nr_context_switches(void);
+
+#ifndef CONFIG_GENERIC_HARDIRQS
+
+struct irq_desc;
+
+static inline void kstat_incr_irqs_this_cpu(unsigned int irq,
+					    struct irq_desc *desc)
+{
+	__this_cpu_inc(kstat.irqs[irq]);
+	__this_cpu_inc(kstat.irqs_sum);
+}
+
+static inline unsigned int kstat_irqs_cpu(unsigned int irq, int cpu)
+{
+       return kstat_cpu(cpu).irqs[irq];
+}
+#else
+#include <linux/irq.h>
+extern unsigned int kstat_irqs_cpu(unsigned int irq, int cpu);
+
+#define kstat_incr_irqs_this_cpu(irqno, DESC)		\
+do {							\
+	__this_cpu_inc(*(DESC)->kstat_irqs);		\
+	__this_cpu_inc(kstat.irqs_sum);			\
+} while (0)
+
+#endif
+
+static inline void kstat_incr_softirqs_this_cpu(unsigned int irq)
+{
+	__this_cpu_inc(kstat.softirqs[irq]);
+}
+
+static inline unsigned int kstat_softirqs_cpu(unsigned int irq, int cpu)
+{
+       return kstat_cpu(cpu).softirqs[irq];
+}
+
+/*
+ * Number of interrupts per specific IRQ source, since bootup
+ */
+#ifndef CONFIG_GENERIC_HARDIRQS
+static inline unsigned int kstat_irqs(unsigned int irq)
+{
+	unsigned int sum = 0;
+	int cpu;
+
+	for_each_possible_cpu(cpu)
+		sum += kstat_irqs_cpu(irq, cpu);
+
+	return sum;
+}
+#else
+extern unsigned int kstat_irqs(unsigned int irq);
+#endif
+
+/*
+ * Number of interrupts per cpu, since bootup
+ */
+static inline unsigned int kstat_cpu_irqs_sum(unsigned int cpu)
+{
+	return kstat_cpu(cpu).irqs_sum;
+}
+
+/*
+ * Lock/unlock the current runqueue - to extract task statistics:
+ */
+extern unsigned long long task_delta_exec(struct task_struct *);
+
+extern void account_user_time(struct task_struct *, cputime_t, cputime_t);
+extern void account_system_time(struct task_struct *, int, cputime_t, cputime_t);
+extern void account_steal_time(cputime_t);
+extern void account_idle_time(cputime_t);
+
+extern void account_process_tick(struct task_struct *, int user);
+extern void account_steal_ticks(unsigned long ticks);
+extern void account_idle_ticks(unsigned long ticks);
+
+#endif /* _LINUX_KERNEL_STAT_H */
diff --git a/include/linux/kernelcapi.h b/include/linux/kernelcapi.h
new file mode 100644
index 00000000..9c268392
--- /dev/null
+++ b/include/linux/kernelcapi.h
@@ -0,0 +1,155 @@
+/*
+ * $Id: kernelcapi.h,v 1.8.6.2 2001/02/07 11:31:31 kai Exp $
+ * 
+ * Kernel CAPI 2.0 Interface for Linux
+ * 
+ * (c) Copyright 1997 by Carsten Paeth (calle@calle.in-berlin.de)
+ * 
+ */
+
+#ifndef __KERNELCAPI_H__
+#define __KERNELCAPI_H__
+
+#define CAPI_MAXAPPL	240	/* maximum number of applications  */
+#define CAPI_MAXCONTR	32	/* maximum number of controller    */
+#define CAPI_MAXDATAWINDOW	8
+
+
+typedef struct kcapi_flagdef {
+	int contr;
+	int flag;
+} kcapi_flagdef;
+
+typedef struct kcapi_carddef {
+	char		driver[32];
+	unsigned int	port;
+	unsigned	irq;
+	unsigned int	membase;
+	int		cardnr;
+} kcapi_carddef;
+
+/* new ioctls >= 10 */
+#define KCAPI_CMD_TRACE		10
+#define KCAPI_CMD_ADDCARD	11	/* OBSOLETE */
+
+/* 
+ * flag > 2 => trace also data
+ * flag & 1 => show trace
+ */
+#define KCAPI_TRACE_OFF			0
+#define KCAPI_TRACE_SHORT_NO_DATA	1
+#define KCAPI_TRACE_FULL_NO_DATA	2
+#define KCAPI_TRACE_SHORT		3
+#define KCAPI_TRACE_FULL		4
+
+
+#ifdef __KERNEL__
+
+#include <linux/list.h>
+#include <linux/skbuff.h>
+#include <linux/workqueue.h>
+#include <linux/notifier.h>
+
+struct capi20_appl {
+	u16 applid;
+	capi_register_params rparam;
+	void (*recv_message)(struct capi20_appl *ap, struct sk_buff *skb);
+	void *private;
+
+	/* internal to kernelcapi.o */
+	unsigned long nrecvctlpkt;
+	unsigned long nrecvdatapkt;
+	unsigned long nsentctlpkt;
+	unsigned long nsentdatapkt;
+	struct mutex recv_mtx;
+	struct sk_buff_head recv_queue;
+	struct work_struct recv_work;
+	int release_in_progress;
+};
+
+u16 capi20_isinstalled(void);
+u16 capi20_register(struct capi20_appl *ap);
+u16 capi20_release(struct capi20_appl *ap);
+u16 capi20_put_message(struct capi20_appl *ap, struct sk_buff *skb);
+u16 capi20_get_manufacturer(u32 contr, u8 buf[CAPI_MANUFACTURER_LEN]);
+u16 capi20_get_version(u32 contr, struct capi_version *verp);
+u16 capi20_get_serial(u32 contr, u8 serial[CAPI_SERIAL_LEN]);
+u16 capi20_get_profile(u32 contr, struct capi_profile *profp);
+int capi20_manufacturer(unsigned int cmd, void __user *data);
+
+#define CAPICTR_UP			0
+#define CAPICTR_DOWN			1
+
+int register_capictr_notifier(struct notifier_block *nb);
+int unregister_capictr_notifier(struct notifier_block *nb);
+
+#define CAPI_NOERROR                      0x0000
+
+#define CAPI_TOOMANYAPPLS		  0x1001
+#define CAPI_LOGBLKSIZETOSMALL	          0x1002
+#define CAPI_BUFFEXECEEDS64K 	          0x1003
+#define CAPI_MSGBUFSIZETOOSMALL	          0x1004
+#define CAPI_ANZLOGCONNNOTSUPPORTED	  0x1005
+#define CAPI_REGRESERVED		  0x1006
+#define CAPI_REGBUSY 		          0x1007
+#define CAPI_REGOSRESOURCEERR	          0x1008
+#define CAPI_REGNOTINSTALLED 	          0x1009
+#define CAPI_REGCTRLERNOTSUPPORTEXTEQUIP  0x100a
+#define CAPI_REGCTRLERONLYSUPPORTEXTEQUIP 0x100b
+
+#define CAPI_ILLAPPNR		          0x1101
+#define CAPI_ILLCMDORSUBCMDORMSGTOSMALL   0x1102
+#define CAPI_SENDQUEUEFULL		  0x1103
+#define CAPI_RECEIVEQUEUEEMPTY	          0x1104
+#define CAPI_RECEIVEOVERFLOW 	          0x1105
+#define CAPI_UNKNOWNNOTPAR		  0x1106
+#define CAPI_MSGBUSY 		          0x1107
+#define CAPI_MSGOSRESOURCEERR	          0x1108
+#define CAPI_MSGNOTINSTALLED 	          0x1109
+#define CAPI_MSGCTRLERNOTSUPPORTEXTEQUIP  0x110a
+#define CAPI_MSGCTRLERONLYSUPPORTEXTEQUIP 0x110b
+
+typedef enum {
+        CapiMessageNotSupportedInCurrentState = 0x2001,
+        CapiIllContrPlciNcci                  = 0x2002,
+        CapiNoPlciAvailable                   = 0x2003,
+        CapiNoNcciAvailable                   = 0x2004,
+        CapiNoListenResourcesAvailable        = 0x2005,
+        CapiNoFaxResourcesAvailable           = 0x2006,
+        CapiIllMessageParmCoding              = 0x2007,
+} RESOURCE_CODING_PROBLEM;
+
+typedef enum {
+        CapiB1ProtocolNotSupported                      = 0x3001,
+        CapiB2ProtocolNotSupported                      = 0x3002,
+        CapiB3ProtocolNotSupported                      = 0x3003,
+        CapiB1ProtocolParameterNotSupported             = 0x3004,
+        CapiB2ProtocolParameterNotSupported             = 0x3005,
+        CapiB3ProtocolParameterNotSupported             = 0x3006,
+        CapiBProtocolCombinationNotSupported            = 0x3007,
+        CapiNcpiNotSupported                            = 0x3008,
+        CapiCipValueUnknown                             = 0x3009,
+        CapiFlagsNotSupported                           = 0x300a,
+        CapiFacilityNotSupported                        = 0x300b,
+        CapiDataLengthNotSupportedByCurrentProtocol     = 0x300c,
+        CapiResetProcedureNotSupportedByCurrentProtocol = 0x300d,
+        CapiTeiAssignmentFailed                         = 0x300e,
+} REQUESTED_SERVICES_PROBLEM;
+
+typedef enum {
+	CapiSuccess                                     = 0x0000,
+	CapiSupplementaryServiceNotSupported            = 0x300e,
+	CapiRequestNotAllowedInThisState                = 0x3010,
+} SUPPLEMENTARY_SERVICE_INFO;
+
+typedef enum {
+	CapiProtocolErrorLayer1                         = 0x3301,
+	CapiProtocolErrorLayer2                         = 0x3302,
+	CapiProtocolErrorLayer3                         = 0x3303,
+	CapiTimeOut                                     = 0x3303, // SuppServiceReason
+	CapiCallGivenToOtherApplication                 = 0x3304,
+} CAPI_REASON;
+
+#endif				/* __KERNEL__ */
+
+#endif				/* __KERNELCAPI_H__ */
diff --git a/include/linux/kexec.h b/include/linux/kexec.h
new file mode 100644
index 00000000..0d7d6a1b
--- /dev/null
+++ b/include/linux/kexec.h
@@ -0,0 +1,231 @@
+#ifndef LINUX_KEXEC_H
+#define LINUX_KEXEC_H
+
+#ifdef CONFIG_KEXEC
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/linkage.h>
+#include <linux/compat.h>
+#include <linux/ioport.h>
+#include <linux/elfcore.h>
+#include <linux/elf.h>
+#include <asm/kexec.h>
+
+/* Verify architecture specific macros are defined */
+
+#ifndef KEXEC_SOURCE_MEMORY_LIMIT
+#error KEXEC_SOURCE_MEMORY_LIMIT not defined
+#endif
+
+#ifndef KEXEC_DESTINATION_MEMORY_LIMIT
+#error KEXEC_DESTINATION_MEMORY_LIMIT not defined
+#endif
+
+#ifndef KEXEC_CONTROL_MEMORY_LIMIT
+#error KEXEC_CONTROL_MEMORY_LIMIT not defined
+#endif
+
+#ifndef KEXEC_CONTROL_PAGE_SIZE
+#error KEXEC_CONTROL_PAGE_SIZE not defined
+#endif
+
+#ifndef KEXEC_ARCH
+#error KEXEC_ARCH not defined
+#endif
+
+#ifndef KEXEC_CRASH_CONTROL_MEMORY_LIMIT
+#define KEXEC_CRASH_CONTROL_MEMORY_LIMIT KEXEC_CONTROL_MEMORY_LIMIT
+#endif
+
+#ifndef KEXEC_CRASH_MEM_ALIGN
+#define KEXEC_CRASH_MEM_ALIGN PAGE_SIZE
+#endif
+
+#define KEXEC_NOTE_HEAD_BYTES ALIGN(sizeof(struct elf_note), 4)
+#define KEXEC_CORE_NOTE_NAME "CORE"
+#define KEXEC_CORE_NOTE_NAME_BYTES ALIGN(sizeof(KEXEC_CORE_NOTE_NAME), 4)
+#define KEXEC_CORE_NOTE_DESC_BYTES ALIGN(sizeof(struct elf_prstatus), 4)
+/*
+ * The per-cpu notes area is a list of notes terminated by a "NULL"
+ * note header.  For kdump, the code in vmcore.c runs in the context
+ * of the second kernel to combine them into one note.
+ */
+#ifndef KEXEC_NOTE_BYTES
+#define KEXEC_NOTE_BYTES ( (KEXEC_NOTE_HEAD_BYTES * 2) +		\
+			    KEXEC_CORE_NOTE_NAME_BYTES +		\
+			    KEXEC_CORE_NOTE_DESC_BYTES )
+#endif
+
+/*
+ * This structure is used to hold the arguments that are used when loading
+ * kernel binaries.
+ */
+
+typedef unsigned long kimage_entry_t;
+#define IND_DESTINATION  0x1
+#define IND_INDIRECTION  0x2
+#define IND_DONE         0x4
+#define IND_SOURCE       0x8
+
+#define KEXEC_SEGMENT_MAX 16
+struct kexec_segment {
+	void __user *buf;
+	size_t bufsz;
+	unsigned long mem;	/* User space sees this as a (void *) ... */
+	size_t memsz;
+};
+
+#ifdef CONFIG_COMPAT
+struct compat_kexec_segment {
+	compat_uptr_t buf;
+	compat_size_t bufsz;
+	compat_ulong_t mem;	/* User space sees this as a (void *) ... */
+	compat_size_t memsz;
+};
+#endif
+
+struct kimage {
+	kimage_entry_t head;
+	kimage_entry_t *entry;
+	kimage_entry_t *last_entry;
+
+	unsigned long destination;
+
+	unsigned long start;
+	struct page *control_code_page;
+	struct page *swap_page;
+
+	unsigned long nr_segments;
+	struct kexec_segment segment[KEXEC_SEGMENT_MAX];
+
+	struct list_head control_pages;
+	struct list_head dest_pages;
+	struct list_head unuseable_pages;
+
+	/* Address of next control page to allocate for crash kernels. */
+	unsigned long control_page;
+
+	/* Flags to indicate special processing */
+	unsigned int type : 1;
+#define KEXEC_TYPE_DEFAULT 0
+#define KEXEC_TYPE_CRASH   1
+	unsigned int preserve_context : 1;
+
+#ifdef ARCH_HAS_KIMAGE_ARCH
+	struct kimage_arch arch;
+#endif
+};
+
+
+
+/* kexec interface functions */
+extern void machine_kexec(struct kimage *image);
+extern int machine_kexec_prepare(struct kimage *image);
+extern void machine_kexec_cleanup(struct kimage *image);
+extern asmlinkage long sys_kexec_load(unsigned long entry,
+					unsigned long nr_segments,
+					struct kexec_segment __user *segments,
+					unsigned long flags);
+extern int kernel_kexec(void);
+#ifdef CONFIG_COMPAT
+extern asmlinkage long compat_sys_kexec_load(unsigned long entry,
+				unsigned long nr_segments,
+				struct compat_kexec_segment __user *segments,
+				unsigned long flags);
+#endif
+extern struct page *kimage_alloc_control_pages(struct kimage *image,
+						unsigned int order);
+extern void crash_kexec(struct pt_regs *);
+int kexec_should_crash(struct task_struct *);
+void crash_save_cpu(struct pt_regs *regs, int cpu);
+void crash_save_vmcoreinfo(void);
+void crash_map_reserved_pages(void);
+void crash_unmap_reserved_pages(void);
+void arch_crash_save_vmcoreinfo(void);
+__printf(1, 2)
+void vmcoreinfo_append_str(const char *fmt, ...);
+unsigned long paddr_vmcoreinfo_note(void);
+
+#define VMCOREINFO_OSRELEASE(value) \
+	vmcoreinfo_append_str("OSRELEASE=%s\n", value)
+#define VMCOREINFO_PAGESIZE(value) \
+	vmcoreinfo_append_str("PAGESIZE=%ld\n", value)
+#define VMCOREINFO_SYMBOL(name) \
+	vmcoreinfo_append_str("SYMBOL(%s)=%lx\n", #name, (unsigned long)&name)
+#define VMCOREINFO_SIZE(name) \
+	vmcoreinfo_append_str("SIZE(%s)=%lu\n", #name, \
+			      (unsigned long)sizeof(name))
+#define VMCOREINFO_STRUCT_SIZE(name) \
+	vmcoreinfo_append_str("SIZE(%s)=%lu\n", #name, \
+			      (unsigned long)sizeof(struct name))
+#define VMCOREINFO_OFFSET(name, field) \
+	vmcoreinfo_append_str("OFFSET(%s.%s)=%lu\n", #name, #field, \
+			      (unsigned long)offsetof(struct name, field))
+#define VMCOREINFO_LENGTH(name, value) \
+	vmcoreinfo_append_str("LENGTH(%s)=%lu\n", #name, (unsigned long)value)
+#define VMCOREINFO_NUMBER(name) \
+	vmcoreinfo_append_str("NUMBER(%s)=%ld\n", #name, (long)name)
+#define VMCOREINFO_CONFIG(name) \
+	vmcoreinfo_append_str("CONFIG_%s=y\n", #name)
+
+extern struct kimage *kexec_image;
+extern struct kimage *kexec_crash_image;
+
+#ifndef kexec_flush_icache_page
+#define kexec_flush_icache_page(page)
+#endif
+
+#define KEXEC_ON_CRASH		0x00000001
+#define KEXEC_PRESERVE_CONTEXT	0x00000002
+#define KEXEC_ARCH_MASK		0xffff0000
+
+/* These values match the ELF architecture values.
+ * Unless there is a good reason that should continue to be the case.
+ */
+#define KEXEC_ARCH_DEFAULT ( 0 << 16)
+#define KEXEC_ARCH_386     ( 3 << 16)
+#define KEXEC_ARCH_X86_64  (62 << 16)
+#define KEXEC_ARCH_PPC     (20 << 16)
+#define KEXEC_ARCH_PPC64   (21 << 16)
+#define KEXEC_ARCH_IA_64   (50 << 16)
+#define KEXEC_ARCH_ARM     (40 << 16)
+#define KEXEC_ARCH_S390    (22 << 16)
+#define KEXEC_ARCH_SH      (42 << 16)
+#define KEXEC_ARCH_MIPS_LE (10 << 16)
+#define KEXEC_ARCH_MIPS    ( 8 << 16)
+
+/* List of defined/legal kexec flags */
+#ifndef CONFIG_KEXEC_JUMP
+#define KEXEC_FLAGS    KEXEC_ON_CRASH
+#else
+#define KEXEC_FLAGS    (KEXEC_ON_CRASH | KEXEC_PRESERVE_CONTEXT)
+#endif
+
+#define VMCOREINFO_BYTES           (4096)
+#define VMCOREINFO_NOTE_NAME       "VMCOREINFO"
+#define VMCOREINFO_NOTE_NAME_BYTES ALIGN(sizeof(VMCOREINFO_NOTE_NAME), 4)
+#define VMCOREINFO_NOTE_SIZE       (KEXEC_NOTE_HEAD_BYTES*2 + VMCOREINFO_BYTES \
+				    + VMCOREINFO_NOTE_NAME_BYTES)
+
+/* Location of a reserved region to hold the crash kernel.
+ */
+extern struct resource crashk_res;
+typedef u32 note_buf_t[KEXEC_NOTE_BYTES/4];
+extern note_buf_t __percpu *crash_notes;
+extern u32 vmcoreinfo_note[VMCOREINFO_NOTE_SIZE/4];
+extern size_t vmcoreinfo_size;
+extern size_t vmcoreinfo_max_size;
+
+int __init parse_crashkernel(char *cmdline, unsigned long long system_ram,
+		unsigned long long *crash_size, unsigned long long *crash_base);
+int crash_shrink_memory(unsigned long new_size);
+size_t crash_get_memory_size(void);
+void crash_free_reserved_phys_range(unsigned long begin, unsigned long end);
+
+#else /* !CONFIG_KEXEC */
+struct pt_regs;
+struct task_struct;
+static inline void crash_kexec(struct pt_regs *regs) { }
+static inline int kexec_should_crash(struct task_struct *p) { return 0; }
+#endif /* CONFIG_KEXEC */
+#endif /* LINUX_KEXEC_H */
diff --git a/include/linux/key-type.h b/include/linux/key-type.h
new file mode 100644
index 00000000..39e3c082
--- /dev/null
+++ b/include/linux/key-type.h
@@ -0,0 +1,125 @@
+/* Definitions for key type implementations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_KEY_TYPE_H
+#define _LINUX_KEY_TYPE_H
+
+#include <linux/key.h>
+
+#ifdef CONFIG_KEYS
+
+/*
+ * key under-construction record
+ * - passed to the request_key actor if supplied
+ */
+struct key_construction {
+	struct key	*key;	/* key being constructed */
+	struct key	*authkey;/* authorisation for key being constructed */
+};
+
+typedef int (*request_key_actor_t)(struct key_construction *key,
+				   const char *op, void *aux);
+
+/*
+ * kernel managed key type definition
+ */
+struct key_type {
+	/* name of the type */
+	const char *name;
+
+	/* default payload length for quota precalculation (optional)
+	 * - this can be used instead of calling key_payload_reserve(), that
+	 *   function only needs to be called if the real datalen is different
+	 */
+	size_t def_datalen;
+
+	/* vet a description */
+	int (*vet_description)(const char *description);
+
+	/* instantiate a key of this type
+	 * - this method should call key_payload_reserve() to determine if the
+	 *   user's quota will hold the payload
+	 */
+	int (*instantiate)(struct key *key, const void *data, size_t datalen);
+
+	/* update a key of this type (optional)
+	 * - this method should call key_payload_reserve() to recalculate the
+	 *   quota consumption
+	 * - the key must be locked against read when modifying
+	 */
+	int (*update)(struct key *key, const void *data, size_t datalen);
+
+	/* match a key against a description */
+	int (*match)(const struct key *key, const void *desc);
+
+	/* clear some of the data from a key on revokation (optional)
+	 * - the key's semaphore will be write-locked by the caller
+	 */
+	void (*revoke)(struct key *key);
+
+	/* clear the data from a key (optional) */
+	void (*destroy)(struct key *key);
+
+	/* describe a key */
+	void (*describe)(const struct key *key, struct seq_file *p);
+
+	/* read a key's data (optional)
+	 * - permission checks will be done by the caller
+	 * - the key's semaphore will be readlocked by the caller
+	 * - should return the amount of data that could be read, no matter how
+	 *   much is copied into the buffer
+	 * - shouldn't do the copy if the buffer is NULL
+	 */
+	long (*read)(const struct key *key, char __user *buffer, size_t buflen);
+
+	/* handle request_key() for this type instead of invoking
+	 * /sbin/request-key (optional)
+	 * - key is the key to instantiate
+	 * - authkey is the authority to assume when instantiating this key
+	 * - op is the operation to be done, usually "create"
+	 * - the call must not return until the instantiation process has run
+	 *   its course
+	 */
+	request_key_actor_t request_key;
+
+	/* internal fields */
+	struct list_head	link;		/* link in types list */
+	struct lock_class_key	lock_class;	/* key->sem lock class */
+};
+
+extern struct key_type key_type_keyring;
+
+extern int register_key_type(struct key_type *ktype);
+extern void unregister_key_type(struct key_type *ktype);
+
+extern int key_payload_reserve(struct key *key, size_t datalen);
+extern int key_instantiate_and_link(struct key *key,
+				    const void *data,
+				    size_t datalen,
+				    struct key *keyring,
+				    struct key *instkey);
+extern int key_reject_and_link(struct key *key,
+			       unsigned timeout,
+			       unsigned error,
+			       struct key *keyring,
+			       struct key *instkey);
+extern void complete_request_key(struct key_construction *cons, int error);
+
+static inline int key_negate_and_link(struct key *key,
+				      unsigned timeout,
+				      struct key *keyring,
+				      struct key *instkey)
+{
+	return key_reject_and_link(key, timeout, ENOKEY, keyring, instkey);
+}
+
+#endif /* CONFIG_KEYS */
+#endif /* _LINUX_KEY_TYPE_H */
diff --git a/include/linux/key.h b/include/linux/key.h
new file mode 100644
index 00000000..96933b1e
--- /dev/null
+++ b/include/linux/key.h
@@ -0,0 +1,334 @@
+/* Authentication token and access key management
+ *
+ * Copyright (C) 2004, 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ *
+ * See Documentation/security/keys.txt for information on keys/keyrings.
+ */
+
+#ifndef _LINUX_KEY_H
+#define _LINUX_KEY_H
+
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/rbtree.h>
+#include <linux/rcupdate.h>
+#include <linux/sysctl.h>
+#include <linux/rwsem.h>
+#include <linux/atomic.h>
+
+#ifdef __KERNEL__
+
+/* key handle serial number */
+typedef int32_t key_serial_t;
+
+/* key handle permissions mask */
+typedef uint32_t key_perm_t;
+
+struct key;
+
+#ifdef CONFIG_KEYS
+
+#undef KEY_DEBUGGING
+
+#define KEY_POS_VIEW	0x01000000	/* possessor can view a key's attributes */
+#define KEY_POS_READ	0x02000000	/* possessor can read key payload / view keyring */
+#define KEY_POS_WRITE	0x04000000	/* possessor can update key payload / add link to keyring */
+#define KEY_POS_SEARCH	0x08000000	/* possessor can find a key in search / search a keyring */
+#define KEY_POS_LINK	0x10000000	/* possessor can create a link to a key/keyring */
+#define KEY_POS_SETATTR	0x20000000	/* possessor can set key attributes */
+#define KEY_POS_ALL	0x3f000000
+
+#define KEY_USR_VIEW	0x00010000	/* user permissions... */
+#define KEY_USR_READ	0x00020000
+#define KEY_USR_WRITE	0x00040000
+#define KEY_USR_SEARCH	0x00080000
+#define KEY_USR_LINK	0x00100000
+#define KEY_USR_SETATTR	0x00200000
+#define KEY_USR_ALL	0x003f0000
+
+#define KEY_GRP_VIEW	0x00000100	/* group permissions... */
+#define KEY_GRP_READ	0x00000200
+#define KEY_GRP_WRITE	0x00000400
+#define KEY_GRP_SEARCH	0x00000800
+#define KEY_GRP_LINK	0x00001000
+#define KEY_GRP_SETATTR	0x00002000
+#define KEY_GRP_ALL	0x00003f00
+
+#define KEY_OTH_VIEW	0x00000001	/* third party permissions... */
+#define KEY_OTH_READ	0x00000002
+#define KEY_OTH_WRITE	0x00000004
+#define KEY_OTH_SEARCH	0x00000008
+#define KEY_OTH_LINK	0x00000010
+#define KEY_OTH_SETATTR	0x00000020
+#define KEY_OTH_ALL	0x0000003f
+
+#define KEY_PERM_UNDEF	0xffffffff
+
+struct seq_file;
+struct user_struct;
+struct signal_struct;
+struct cred;
+
+struct key_type;
+struct key_owner;
+struct keyring_list;
+struct keyring_name;
+
+/*****************************************************************************/
+/*
+ * key reference with possession attribute handling
+ *
+ * NOTE! key_ref_t is a typedef'd pointer to a type that is not actually
+ * defined. This is because we abuse the bottom bit of the reference to carry a
+ * flag to indicate whether the calling process possesses that key in one of
+ * its keyrings.
+ *
+ * the key_ref_t has been made a separate type so that the compiler can reject
+ * attempts to dereference it without proper conversion.
+ *
+ * the three functions are used to assemble and disassemble references
+ */
+typedef struct __key_reference_with_attributes *key_ref_t;
+
+static inline key_ref_t make_key_ref(const struct key *key,
+				     unsigned long possession)
+{
+	return (key_ref_t) ((unsigned long) key | possession);
+}
+
+static inline struct key *key_ref_to_ptr(const key_ref_t key_ref)
+{
+	return (struct key *) ((unsigned long) key_ref & ~1UL);
+}
+
+static inline unsigned long is_key_possessed(const key_ref_t key_ref)
+{
+	return (unsigned long) key_ref & 1UL;
+}
+
+/*****************************************************************************/
+/*
+ * authentication token / access credential / keyring
+ * - types of key include:
+ *   - keyrings
+ *   - disk encryption IDs
+ *   - Kerberos TGTs and tickets
+ */
+struct key {
+	atomic_t		usage;		/* number of references */
+	key_serial_t		serial;		/* key serial number */
+	struct rb_node		serial_node;
+	struct key_type		*type;		/* type of key */
+	struct rw_semaphore	sem;		/* change vs change sem */
+	struct key_user		*user;		/* owner of this key */
+	void			*security;	/* security data for this key */
+	union {
+		time_t		expiry;		/* time at which key expires (or 0) */
+		time_t		revoked_at;	/* time at which key was revoked */
+	};
+	uid_t			uid;
+	gid_t			gid;
+	key_perm_t		perm;		/* access permissions */
+	unsigned short		quotalen;	/* length added to quota */
+	unsigned short		datalen;	/* payload data length
+						 * - may not match RCU dereferenced payload
+						 * - payload should contain own length
+						 */
+
+#ifdef KEY_DEBUGGING
+	unsigned		magic;
+#define KEY_DEBUG_MAGIC		0x18273645u
+#define KEY_DEBUG_MAGIC_X	0xf8e9dacbu
+#endif
+
+	unsigned long		flags;		/* status flags (change with bitops) */
+#define KEY_FLAG_INSTANTIATED	0	/* set if key has been instantiated */
+#define KEY_FLAG_DEAD		1	/* set if key type has been deleted */
+#define KEY_FLAG_REVOKED	2	/* set if key had been revoked */
+#define KEY_FLAG_IN_QUOTA	3	/* set if key consumes quota */
+#define KEY_FLAG_USER_CONSTRUCT	4	/* set if key is being constructed in userspace */
+#define KEY_FLAG_NEGATIVE	5	/* set if key is negative */
+#define KEY_FLAG_ROOT_CAN_CLEAR	6	/* set if key can be cleared by root without permission */
+
+	/* the description string
+	 * - this is used to match a key against search criteria
+	 * - this should be a printable string
+	 * - eg: for krb5 AFS, this might be "afs@REDHAT.COM"
+	 */
+	char			*description;
+
+	/* type specific data
+	 * - this is used by the keyring type to index the name
+	 */
+	union {
+		struct list_head	link;
+		unsigned long		x[2];
+		void			*p[2];
+		int			reject_error;
+	} type_data;
+
+	/* key data
+	 * - this is used to hold the data actually used in cryptography or
+	 *   whatever
+	 */
+	union {
+		unsigned long		value;
+		void __rcu		*rcudata;
+		void			*data;
+		struct keyring_list __rcu *subscriptions;
+	} payload;
+};
+
+extern struct key *key_alloc(struct key_type *type,
+			     const char *desc,
+			     uid_t uid, gid_t gid,
+			     const struct cred *cred,
+			     key_perm_t perm,
+			     unsigned long flags);
+
+
+#define KEY_ALLOC_IN_QUOTA	0x0000	/* add to quota, reject if would overrun */
+#define KEY_ALLOC_QUOTA_OVERRUN	0x0001	/* add to quota, permit even if overrun */
+#define KEY_ALLOC_NOT_IN_QUOTA	0x0002	/* not in quota */
+
+extern void key_revoke(struct key *key);
+extern void key_put(struct key *key);
+
+static inline struct key *key_get(struct key *key)
+{
+	if (key)
+		atomic_inc(&key->usage);
+	return key;
+}
+
+static inline void key_ref_put(key_ref_t key_ref)
+{
+	key_put(key_ref_to_ptr(key_ref));
+}
+
+extern struct key *request_key(struct key_type *type,
+			       const char *description,
+			       const char *callout_info);
+
+extern struct key *request_key_with_auxdata(struct key_type *type,
+					    const char *description,
+					    const void *callout_info,
+					    size_t callout_len,
+					    void *aux);
+
+extern struct key *request_key_async(struct key_type *type,
+				     const char *description,
+				     const void *callout_info,
+				     size_t callout_len);
+
+extern struct key *request_key_async_with_auxdata(struct key_type *type,
+						  const char *description,
+						  const void *callout_info,
+						  size_t callout_len,
+						  void *aux);
+
+extern int wait_for_key_construction(struct key *key, bool intr);
+
+extern int key_validate(struct key *key);
+
+extern key_ref_t key_create_or_update(key_ref_t keyring,
+				      const char *type,
+				      const char *description,
+				      const void *payload,
+				      size_t plen,
+				      key_perm_t perm,
+				      unsigned long flags);
+
+extern int key_update(key_ref_t key,
+		      const void *payload,
+		      size_t plen);
+
+extern int key_link(struct key *keyring,
+		    struct key *key);
+
+extern int key_unlink(struct key *keyring,
+		      struct key *key);
+
+extern struct key *keyring_alloc(const char *description, uid_t uid, gid_t gid,
+				 const struct cred *cred,
+				 unsigned long flags,
+				 struct key *dest);
+
+extern int keyring_clear(struct key *keyring);
+
+extern key_ref_t keyring_search(key_ref_t keyring,
+				struct key_type *type,
+				const char *description);
+
+extern int keyring_add_key(struct key *keyring,
+			   struct key *key);
+
+extern struct key *key_lookup(key_serial_t id);
+
+static inline key_serial_t key_serial(const struct key *key)
+{
+	return key ? key->serial : 0;
+}
+
+extern void key_set_timeout(struct key *, unsigned);
+
+/**
+ * key_is_instantiated - Determine if a key has been positively instantiated
+ * @key: The key to check.
+ *
+ * Return true if the specified key has been positively instantiated, false
+ * otherwise.
+ */
+static inline bool key_is_instantiated(const struct key *key)
+{
+	return test_bit(KEY_FLAG_INSTANTIATED, &key->flags) &&
+		!test_bit(KEY_FLAG_NEGATIVE, &key->flags);
+}
+
+#define rcu_dereference_key(KEY)					\
+	(rcu_dereference_protected((KEY)->payload.rcudata,		\
+				   rwsem_is_locked(&((struct key *)(KEY))->sem)))
+
+#define rcu_assign_keypointer(KEY, PAYLOAD)				\
+	(rcu_assign_pointer((KEY)->payload.rcudata, PAYLOAD))
+
+#ifdef CONFIG_SYSCTL
+extern ctl_table key_sysctls[];
+#endif
+
+extern void key_replace_session_keyring(void);
+
+/*
+ * the userspace interface
+ */
+extern int install_thread_keyring_to_cred(struct cred *cred);
+extern void key_fsuid_changed(struct task_struct *tsk);
+extern void key_fsgid_changed(struct task_struct *tsk);
+extern void key_init(void);
+
+#else /* CONFIG_KEYS */
+
+#define key_validate(k)			0
+#define key_serial(k)			0
+#define key_get(k) 			({ NULL; })
+#define key_revoke(k)			do { } while(0)
+#define key_put(k)			do { } while(0)
+#define key_ref_put(k)			do { } while(0)
+#define make_key_ref(k, p)		NULL
+#define key_ref_to_ptr(k)		NULL
+#define is_key_possessed(k)		0
+#define key_fsuid_changed(t)		do { } while(0)
+#define key_fsgid_changed(t)		do { } while(0)
+#define key_init()			do { } while(0)
+#define key_replace_session_keyring()	do { } while(0)
+
+#endif /* CONFIG_KEYS */
+#endif /* __KERNEL__ */
+#endif /* _LINUX_KEY_H */
diff --git a/include/linux/keyboard.h b/include/linux/keyboard.h
new file mode 100644
index 00000000..86e5214a
--- /dev/null
+++ b/include/linux/keyboard.h
@@ -0,0 +1,459 @@
+#ifndef __LINUX_KEYBOARD_H
+#define __LINUX_KEYBOARD_H
+
+#include <linux/wait.h>
+
+#define KG_SHIFT	0
+#define KG_CTRL		2
+#define KG_ALT		3
+#define KG_ALTGR	1
+#define KG_SHIFTL	4
+#define KG_KANASHIFT	4
+#define KG_SHIFTR	5
+#define KG_CTRLL	6
+#define KG_CTRLR	7
+#define KG_CAPSSHIFT	8
+
+#define NR_SHIFT	9
+
+#define NR_KEYS		256
+#define MAX_NR_KEYMAPS	256
+/* This means 128Kb if all keymaps are allocated. Only the superuser
+	may increase the number of keymaps beyond MAX_NR_OF_USER_KEYMAPS. */
+#define MAX_NR_OF_USER_KEYMAPS 256 	/* should be at least 7 */
+
+#ifdef __KERNEL__
+struct notifier_block;
+extern unsigned short *key_maps[MAX_NR_KEYMAPS];
+extern unsigned short plain_map[NR_KEYS];
+
+struct keyboard_notifier_param {
+	struct vc_data *vc;	/* VC on which the keyboard press was done */
+	int down;		/* Pressure of the key? */
+	int shift;		/* Current shift mask */
+	int ledstate;		/* Current led state */
+	unsigned int value;	/* keycode, unicode value or keysym */
+};
+
+extern int register_keyboard_notifier(struct notifier_block *nb);
+extern int unregister_keyboard_notifier(struct notifier_block *nb);
+#endif
+
+#define MAX_NR_FUNC	256	/* max nr of strings assigned to keys */
+
+#define KT_LATIN	0	/* we depend on this being zero */
+#define KT_LETTER	11	/* symbol that can be acted upon by CapsLock */
+#define KT_FN		1
+#define KT_SPEC		2
+#define KT_PAD		3
+#define KT_DEAD		4
+#define KT_CONS		5
+#define KT_CUR		6
+#define KT_SHIFT	7
+#define KT_META		8
+#define KT_ASCII	9
+#define KT_LOCK		10
+#define KT_SLOCK	12
+#define KT_DEAD2	13
+#define KT_BRL		14
+
+#define K(t,v)		(((t)<<8)|(v))
+#define KTYP(x)		((x) >> 8)
+#define KVAL(x)		((x) & 0xff)
+
+#define K_F1		K(KT_FN,0)
+#define K_F2		K(KT_FN,1)
+#define K_F3		K(KT_FN,2)
+#define K_F4		K(KT_FN,3)
+#define K_F5		K(KT_FN,4)
+#define K_F6		K(KT_FN,5)
+#define K_F7		K(KT_FN,6)
+#define K_F8		K(KT_FN,7)
+#define K_F9		K(KT_FN,8)
+#define K_F10		K(KT_FN,9)
+#define K_F11		K(KT_FN,10)
+#define K_F12		K(KT_FN,11)
+#define K_F13		K(KT_FN,12)
+#define K_F14		K(KT_FN,13)
+#define K_F15		K(KT_FN,14)
+#define K_F16		K(KT_FN,15)
+#define K_F17		K(KT_FN,16)
+#define K_F18		K(KT_FN,17)
+#define K_F19		K(KT_FN,18)
+#define K_F20		K(KT_FN,19)
+#define K_FIND		K(KT_FN,20)
+#define K_INSERT	K(KT_FN,21)
+#define K_REMOVE	K(KT_FN,22)
+#define K_SELECT	K(KT_FN,23)
+#define K_PGUP		K(KT_FN,24) /* PGUP is a synonym for PRIOR */
+#define K_PGDN		K(KT_FN,25) /* PGDN is a synonym for NEXT */
+#define K_MACRO	 	K(KT_FN,26)
+#define K_HELP		K(KT_FN,27)
+#define K_DO		K(KT_FN,28)
+#define K_PAUSE	 	K(KT_FN,29)
+#define K_F21		K(KT_FN,30)
+#define K_F22		K(KT_FN,31)
+#define K_F23		K(KT_FN,32)
+#define K_F24		K(KT_FN,33)
+#define K_F25		K(KT_FN,34)
+#define K_F26		K(KT_FN,35)
+#define K_F27		K(KT_FN,36)
+#define K_F28		K(KT_FN,37)
+#define K_F29		K(KT_FN,38)
+#define K_F30		K(KT_FN,39)
+#define K_F31		K(KT_FN,40)
+#define K_F32		K(KT_FN,41)
+#define K_F33		K(KT_FN,42)
+#define K_F34		K(KT_FN,43)
+#define K_F35		K(KT_FN,44)
+#define K_F36		K(KT_FN,45)
+#define K_F37		K(KT_FN,46)
+#define K_F38		K(KT_FN,47)
+#define K_F39		K(KT_FN,48)
+#define K_F40		K(KT_FN,49)
+#define K_F41		K(KT_FN,50)
+#define K_F42		K(KT_FN,51)
+#define K_F43		K(KT_FN,52)
+#define K_F44		K(KT_FN,53)
+#define K_F45		K(KT_FN,54)
+#define K_F46		K(KT_FN,55)
+#define K_F47		K(KT_FN,56)
+#define K_F48		K(KT_FN,57)
+#define K_F49		K(KT_FN,58)
+#define K_F50		K(KT_FN,59)
+#define K_F51		K(KT_FN,60)
+#define K_F52		K(KT_FN,61)
+#define K_F53		K(KT_FN,62)
+#define K_F54		K(KT_FN,63)
+#define K_F55		K(KT_FN,64)
+#define K_F56		K(KT_FN,65)
+#define K_F57		K(KT_FN,66)
+#define K_F58		K(KT_FN,67)
+#define K_F59		K(KT_FN,68)
+#define K_F60		K(KT_FN,69)
+#define K_F61		K(KT_FN,70)
+#define K_F62		K(KT_FN,71)
+#define K_F63		K(KT_FN,72)
+#define K_F64		K(KT_FN,73)
+#define K_F65		K(KT_FN,74)
+#define K_F66		K(KT_FN,75)
+#define K_F67		K(KT_FN,76)
+#define K_F68		K(KT_FN,77)
+#define K_F69		K(KT_FN,78)
+#define K_F70		K(KT_FN,79)
+#define K_F71		K(KT_FN,80)
+#define K_F72		K(KT_FN,81)
+#define K_F73		K(KT_FN,82)
+#define K_F74		K(KT_FN,83)
+#define K_F75		K(KT_FN,84)
+#define K_F76		K(KT_FN,85)
+#define K_F77		K(KT_FN,86)
+#define K_F78		K(KT_FN,87)
+#define K_F79		K(KT_FN,88)
+#define K_F80		K(KT_FN,89)
+#define K_F81		K(KT_FN,90)
+#define K_F82		K(KT_FN,91)
+#define K_F83		K(KT_FN,92)
+#define K_F84		K(KT_FN,93)
+#define K_F85		K(KT_FN,94)
+#define K_F86		K(KT_FN,95)
+#define K_F87		K(KT_FN,96)
+#define K_F88		K(KT_FN,97)
+#define K_F89		K(KT_FN,98)
+#define K_F90		K(KT_FN,99)
+#define K_F91		K(KT_FN,100)
+#define K_F92		K(KT_FN,101)
+#define K_F93		K(KT_FN,102)
+#define K_F94		K(KT_FN,103)
+#define K_F95		K(KT_FN,104)
+#define K_F96		K(KT_FN,105)
+#define K_F97		K(KT_FN,106)
+#define K_F98		K(KT_FN,107)
+#define K_F99		K(KT_FN,108)
+#define K_F100		K(KT_FN,109)
+#define K_F101		K(KT_FN,110)
+#define K_F102		K(KT_FN,111)
+#define K_F103		K(KT_FN,112)
+#define K_F104		K(KT_FN,113)
+#define K_F105		K(KT_FN,114)
+#define K_F106		K(KT_FN,115)
+#define K_F107		K(KT_FN,116)
+#define K_F108		K(KT_FN,117)
+#define K_F109		K(KT_FN,118)
+#define K_F110		K(KT_FN,119)
+#define K_F111		K(KT_FN,120)
+#define K_F112		K(KT_FN,121)
+#define K_F113		K(KT_FN,122)
+#define K_F114		K(KT_FN,123)
+#define K_F115		K(KT_FN,124)
+#define K_F116		K(KT_FN,125)
+#define K_F117		K(KT_FN,126)
+#define K_F118		K(KT_FN,127)
+#define K_F119		K(KT_FN,128)
+#define K_F120		K(KT_FN,129)
+#define K_F121		K(KT_FN,130)
+#define K_F122		K(KT_FN,131)
+#define K_F123		K(KT_FN,132)
+#define K_F124		K(KT_FN,133)
+#define K_F125		K(KT_FN,134)
+#define K_F126		K(KT_FN,135)
+#define K_F127		K(KT_FN,136)
+#define K_F128		K(KT_FN,137)
+#define K_F129		K(KT_FN,138)
+#define K_F130		K(KT_FN,139)
+#define K_F131		K(KT_FN,140)
+#define K_F132		K(KT_FN,141)
+#define K_F133		K(KT_FN,142)
+#define K_F134		K(KT_FN,143)
+#define K_F135		K(KT_FN,144)
+#define K_F136		K(KT_FN,145)
+#define K_F137		K(KT_FN,146)
+#define K_F138		K(KT_FN,147)
+#define K_F139		K(KT_FN,148)
+#define K_F140		K(KT_FN,149)
+#define K_F141		K(KT_FN,150)
+#define K_F142		K(KT_FN,151)
+#define K_F143		K(KT_FN,152)
+#define K_F144		K(KT_FN,153)
+#define K_F145		K(KT_FN,154)
+#define K_F146		K(KT_FN,155)
+#define K_F147		K(KT_FN,156)
+#define K_F148		K(KT_FN,157)
+#define K_F149		K(KT_FN,158)
+#define K_F150		K(KT_FN,159)
+#define K_F151		K(KT_FN,160)
+#define K_F152		K(KT_FN,161)
+#define K_F153		K(KT_FN,162)
+#define K_F154		K(KT_FN,163)
+#define K_F155		K(KT_FN,164)
+#define K_F156		K(KT_FN,165)
+#define K_F157		K(KT_FN,166)
+#define K_F158		K(KT_FN,167)
+#define K_F159		K(KT_FN,168)
+#define K_F160		K(KT_FN,169)
+#define K_F161		K(KT_FN,170)
+#define K_F162		K(KT_FN,171)
+#define K_F163		K(KT_FN,172)
+#define K_F164		K(KT_FN,173)
+#define K_F165		K(KT_FN,174)
+#define K_F166		K(KT_FN,175)
+#define K_F167		K(KT_FN,176)
+#define K_F168		K(KT_FN,177)
+#define K_F169		K(KT_FN,178)
+#define K_F170		K(KT_FN,179)
+#define K_F171		K(KT_FN,180)
+#define K_F172		K(KT_FN,181)
+#define K_F173		K(KT_FN,182)
+#define K_F174		K(KT_FN,183)
+#define K_F175		K(KT_FN,184)
+#define K_F176		K(KT_FN,185)
+#define K_F177		K(KT_FN,186)
+#define K_F178		K(KT_FN,187)
+#define K_F179		K(KT_FN,188)
+#define K_F180		K(KT_FN,189)
+#define K_F181		K(KT_FN,190)
+#define K_F182		K(KT_FN,191)
+#define K_F183		K(KT_FN,192)
+#define K_F184		K(KT_FN,193)
+#define K_F185		K(KT_FN,194)
+#define K_F186		K(KT_FN,195)
+#define K_F187		K(KT_FN,196)
+#define K_F188		K(KT_FN,197)
+#define K_F189		K(KT_FN,198)
+#define K_F190		K(KT_FN,199)
+#define K_F191		K(KT_FN,200)
+#define K_F192		K(KT_FN,201)
+#define K_F193		K(KT_FN,202)
+#define K_F194		K(KT_FN,203)
+#define K_F195		K(KT_FN,204)
+#define K_F196		K(KT_FN,205)
+#define K_F197		K(KT_FN,206)
+#define K_F198		K(KT_FN,207)
+#define K_F199		K(KT_FN,208)
+#define K_F200		K(KT_FN,209)
+#define K_F201		K(KT_FN,210)
+#define K_F202		K(KT_FN,211)
+#define K_F203		K(KT_FN,212)
+#define K_F204		K(KT_FN,213)
+#define K_F205		K(KT_FN,214)
+#define K_F206		K(KT_FN,215)
+#define K_F207		K(KT_FN,216)
+#define K_F208		K(KT_FN,217)
+#define K_F209		K(KT_FN,218)
+#define K_F210		K(KT_FN,219)
+#define K_F211		K(KT_FN,220)
+#define K_F212		K(KT_FN,221)
+#define K_F213		K(KT_FN,222)
+#define K_F214		K(KT_FN,223)
+#define K_F215		K(KT_FN,224)
+#define K_F216		K(KT_FN,225)
+#define K_F217		K(KT_FN,226)
+#define K_F218		K(KT_FN,227)
+#define K_F219		K(KT_FN,228)
+#define K_F220		K(KT_FN,229)
+#define K_F221		K(KT_FN,230)
+#define K_F222		K(KT_FN,231)
+#define K_F223		K(KT_FN,232)
+#define K_F224		K(KT_FN,233)
+#define K_F225		K(KT_FN,234)
+#define K_F226		K(KT_FN,235)
+#define K_F227		K(KT_FN,236)
+#define K_F228		K(KT_FN,237)
+#define K_F229		K(KT_FN,238)
+#define K_F230		K(KT_FN,239)
+#define K_F231		K(KT_FN,240)
+#define K_F232		K(KT_FN,241)
+#define K_F233		K(KT_FN,242)
+#define K_F234		K(KT_FN,243)
+#define K_F235		K(KT_FN,244)
+#define K_F236		K(KT_FN,245)
+#define K_F237		K(KT_FN,246)
+#define K_F238		K(KT_FN,247)
+#define K_F239		K(KT_FN,248)
+#define K_F240		K(KT_FN,249)
+#define K_F241		K(KT_FN,250)
+#define K_F242		K(KT_FN,251)
+#define K_F243		K(KT_FN,252)
+#define K_F244		K(KT_FN,253)
+#define K_F245		K(KT_FN,254)
+#define K_UNDO		K(KT_FN,255)
+
+
+#define K_HOLE		K(KT_SPEC,0)
+#define K_ENTER		K(KT_SPEC,1)
+#define K_SH_REGS	K(KT_SPEC,2)
+#define K_SH_MEM	K(KT_SPEC,3)
+#define K_SH_STAT	K(KT_SPEC,4)
+#define K_BREAK		K(KT_SPEC,5)
+#define K_CONS		K(KT_SPEC,6)
+#define K_CAPS		K(KT_SPEC,7)
+#define K_NUM		K(KT_SPEC,8)
+#define K_HOLD		K(KT_SPEC,9)
+#define K_SCROLLFORW	K(KT_SPEC,10)
+#define K_SCROLLBACK	K(KT_SPEC,11)
+#define K_BOOT		K(KT_SPEC,12)
+#define K_CAPSON	K(KT_SPEC,13)
+#define K_COMPOSE	K(KT_SPEC,14)
+#define K_SAK		K(KT_SPEC,15)
+#define K_DECRCONSOLE	K(KT_SPEC,16)
+#define K_INCRCONSOLE	K(KT_SPEC,17)
+#define K_SPAWNCONSOLE	K(KT_SPEC,18)
+#define K_BARENUMLOCK	K(KT_SPEC,19)
+
+#define K_ALLOCATED	K(KT_SPEC,126) /* dynamically allocated keymap */
+#define K_NOSUCHMAP	K(KT_SPEC,127) /* returned by KDGKBENT */
+
+#define K_P0		K(KT_PAD,0)
+#define K_P1		K(KT_PAD,1)
+#define K_P2		K(KT_PAD,2)
+#define K_P3		K(KT_PAD,3)
+#define K_P4		K(KT_PAD,4)
+#define K_P5		K(KT_PAD,5)
+#define K_P6		K(KT_PAD,6)
+#define K_P7		K(KT_PAD,7)
+#define K_P8		K(KT_PAD,8)
+#define K_P9		K(KT_PAD,9)
+#define K_PPLUS		K(KT_PAD,10)	/* key-pad plus */
+#define K_PMINUS	K(KT_PAD,11)	/* key-pad minus */
+#define K_PSTAR		K(KT_PAD,12)	/* key-pad asterisk (star) */
+#define K_PSLASH	K(KT_PAD,13)	/* key-pad slash */
+#define K_PENTER	K(KT_PAD,14)	/* key-pad enter */
+#define K_PCOMMA	K(KT_PAD,15)	/* key-pad comma: kludge... */
+#define K_PDOT		K(KT_PAD,16)	/* key-pad dot (period): kludge... */
+#define K_PPLUSMINUS	K(KT_PAD,17)	/* key-pad plus/minus */
+#define K_PPARENL	K(KT_PAD,18)	/* key-pad left parenthesis */
+#define K_PPARENR	K(KT_PAD,19)	/* key-pad right parenthesis */
+
+#define NR_PAD		20
+
+#define K_DGRAVE	K(KT_DEAD,0)
+#define K_DACUTE	K(KT_DEAD,1)
+#define K_DCIRCM	K(KT_DEAD,2)
+#define K_DTILDE	K(KT_DEAD,3)
+#define K_DDIERE	K(KT_DEAD,4)
+#define K_DCEDIL	K(KT_DEAD,5)
+
+#define NR_DEAD		6
+
+#define K_DOWN		K(KT_CUR,0)
+#define K_LEFT		K(KT_CUR,1)
+#define K_RIGHT		K(KT_CUR,2)
+#define K_UP		K(KT_CUR,3)
+
+#define K_SHIFT		K(KT_SHIFT,KG_SHIFT)
+#define K_CTRL		K(KT_SHIFT,KG_CTRL)
+#define K_ALT		K(KT_SHIFT,KG_ALT)
+#define K_ALTGR		K(KT_SHIFT,KG_ALTGR)
+#define K_SHIFTL	K(KT_SHIFT,KG_SHIFTL)
+#define K_SHIFTR	K(KT_SHIFT,KG_SHIFTR)
+#define K_CTRLL	 	K(KT_SHIFT,KG_CTRLL)
+#define K_CTRLR	 	K(KT_SHIFT,KG_CTRLR)
+#define K_CAPSSHIFT	K(KT_SHIFT,KG_CAPSSHIFT)
+
+#define K_ASC0		K(KT_ASCII,0)
+#define K_ASC1		K(KT_ASCII,1)
+#define K_ASC2		K(KT_ASCII,2)
+#define K_ASC3		K(KT_ASCII,3)
+#define K_ASC4		K(KT_ASCII,4)
+#define K_ASC5		K(KT_ASCII,5)
+#define K_ASC6		K(KT_ASCII,6)
+#define K_ASC7		K(KT_ASCII,7)
+#define K_ASC8		K(KT_ASCII,8)
+#define K_ASC9		K(KT_ASCII,9)
+#define K_HEX0		K(KT_ASCII,10)
+#define K_HEX1		K(KT_ASCII,11)
+#define K_HEX2		K(KT_ASCII,12)
+#define K_HEX3		K(KT_ASCII,13)
+#define K_HEX4		K(KT_ASCII,14)
+#define K_HEX5		K(KT_ASCII,15)
+#define K_HEX6		K(KT_ASCII,16)
+#define K_HEX7		K(KT_ASCII,17)
+#define K_HEX8		K(KT_ASCII,18)
+#define K_HEX9		K(KT_ASCII,19)
+#define K_HEXa		K(KT_ASCII,20)
+#define K_HEXb		K(KT_ASCII,21)
+#define K_HEXc		K(KT_ASCII,22)
+#define K_HEXd		K(KT_ASCII,23)
+#define K_HEXe		K(KT_ASCII,24)
+#define K_HEXf		K(KT_ASCII,25)
+
+#define NR_ASCII	26
+
+#define K_SHIFTLOCK	K(KT_LOCK,KG_SHIFT)
+#define K_CTRLLOCK	K(KT_LOCK,KG_CTRL)
+#define K_ALTLOCK	K(KT_LOCK,KG_ALT)
+#define K_ALTGRLOCK	K(KT_LOCK,KG_ALTGR)
+#define K_SHIFTLLOCK	K(KT_LOCK,KG_SHIFTL)
+#define K_SHIFTRLOCK	K(KT_LOCK,KG_SHIFTR)
+#define K_CTRLLLOCK	K(KT_LOCK,KG_CTRLL)
+#define K_CTRLRLOCK	K(KT_LOCK,KG_CTRLR)
+#define K_CAPSSHIFTLOCK	K(KT_LOCK,KG_CAPSSHIFT)
+
+#define K_SHIFT_SLOCK	K(KT_SLOCK,KG_SHIFT)
+#define K_CTRL_SLOCK	K(KT_SLOCK,KG_CTRL)
+#define K_ALT_SLOCK	K(KT_SLOCK,KG_ALT)
+#define K_ALTGR_SLOCK	K(KT_SLOCK,KG_ALTGR)
+#define K_SHIFTL_SLOCK	K(KT_SLOCK,KG_SHIFTL)
+#define K_SHIFTR_SLOCK	K(KT_SLOCK,KG_SHIFTR)
+#define K_CTRLL_SLOCK	K(KT_SLOCK,KG_CTRLL)
+#define K_CTRLR_SLOCK	K(KT_SLOCK,KG_CTRLR)
+#define K_CAPSSHIFT_SLOCK	K(KT_SLOCK,KG_CAPSSHIFT)
+
+#define NR_LOCK		9
+
+#define K_BRL_BLANK     K(KT_BRL, 0)
+#define K_BRL_DOT1      K(KT_BRL, 1)
+#define K_BRL_DOT2      K(KT_BRL, 2)
+#define K_BRL_DOT3      K(KT_BRL, 3)
+#define K_BRL_DOT4      K(KT_BRL, 4)
+#define K_BRL_DOT5      K(KT_BRL, 5)
+#define K_BRL_DOT6      K(KT_BRL, 6)
+#define K_BRL_DOT7      K(KT_BRL, 7)
+#define K_BRL_DOT8      K(KT_BRL, 8)
+#define K_BRL_DOT9      K(KT_BRL, 9)
+#define K_BRL_DOT10     K(KT_BRL, 10)
+
+#define NR_BRL		11
+
+#define MAX_DIACR	256
+#endif
diff --git a/include/linux/keychord.h b/include/linux/keychord.h
new file mode 100644
index 00000000..856a5850
--- /dev/null
+++ b/include/linux/keychord.h
@@ -0,0 +1,52 @@
+/*
+ *  Key chord input driver
+ *
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Mike Lockwood <lockwood@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+*/
+
+#ifndef __LINUX_KEYCHORD_H_
+#define __LINUX_KEYCHORD_H_
+
+#include <linux/input.h>
+
+#define KEYCHORD_VERSION		1
+
+/*
+ * One or more input_keychord structs are written to /dev/keychord
+ * at once to specify the list of keychords to monitor.
+ * Reading /dev/keychord returns the id of a keychord when the
+ * keychord combination is pressed.  A keychord is signalled when
+ * all of the keys in the keycode list are in the pressed state.
+ * The order in which the keys are pressed does not matter.
+ * The keychord will not be signalled if keys not in the keycode
+ * list are pressed.
+ * Keychords will not be signalled on key release events.
+ */
+struct input_keychord {
+	/* should be KEYCHORD_VERSION */
+	__u16 version;
+	/*
+	 * client specified ID, returned from read()
+	 * when this keychord is pressed.
+	 */
+	__u16 id;
+
+	/* number of keycodes in this keychord */
+	__u16 count;
+
+	/* variable length array of keycodes */
+	__u16 keycodes[];
+};
+
+#endif	/* __LINUX_KEYCHORD_H_ */
diff --git a/include/linux/keyctl.h b/include/linux/keyctl.h
new file mode 100644
index 00000000..9b0b865c
--- /dev/null
+++ b/include/linux/keyctl.h
@@ -0,0 +1,59 @@
+/* keyctl.h: keyctl command IDs
+ *
+ * Copyright (C) 2004, 2008 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_KEYCTL_H
+#define _LINUX_KEYCTL_H
+
+/* special process keyring shortcut IDs */
+#define KEY_SPEC_THREAD_KEYRING		-1	/* - key ID for thread-specific keyring */
+#define KEY_SPEC_PROCESS_KEYRING	-2	/* - key ID for process-specific keyring */
+#define KEY_SPEC_SESSION_KEYRING	-3	/* - key ID for session-specific keyring */
+#define KEY_SPEC_USER_KEYRING		-4	/* - key ID for UID-specific keyring */
+#define KEY_SPEC_USER_SESSION_KEYRING	-5	/* - key ID for UID-session keyring */
+#define KEY_SPEC_GROUP_KEYRING		-6	/* - key ID for GID-specific keyring */
+#define KEY_SPEC_REQKEY_AUTH_KEY	-7	/* - key ID for assumed request_key auth key */
+#define KEY_SPEC_REQUESTOR_KEYRING	-8	/* - key ID for request_key() dest keyring */
+
+/* request-key default keyrings */
+#define KEY_REQKEY_DEFL_NO_CHANGE		-1
+#define KEY_REQKEY_DEFL_DEFAULT			0
+#define KEY_REQKEY_DEFL_THREAD_KEYRING		1
+#define KEY_REQKEY_DEFL_PROCESS_KEYRING		2
+#define KEY_REQKEY_DEFL_SESSION_KEYRING		3
+#define KEY_REQKEY_DEFL_USER_KEYRING		4
+#define KEY_REQKEY_DEFL_USER_SESSION_KEYRING	5
+#define KEY_REQKEY_DEFL_GROUP_KEYRING		6
+#define KEY_REQKEY_DEFL_REQUESTOR_KEYRING	7
+
+/* keyctl commands */
+#define KEYCTL_GET_KEYRING_ID		0	/* ask for a keyring's ID */
+#define KEYCTL_JOIN_SESSION_KEYRING	1	/* join or start named session keyring */
+#define KEYCTL_UPDATE			2	/* update a key */
+#define KEYCTL_REVOKE			3	/* revoke a key */
+#define KEYCTL_CHOWN			4	/* set ownership of a key */
+#define KEYCTL_SETPERM			5	/* set perms on a key */
+#define KEYCTL_DESCRIBE			6	/* describe a key */
+#define KEYCTL_CLEAR			7	/* clear contents of a keyring */
+#define KEYCTL_LINK			8	/* link a key into a keyring */
+#define KEYCTL_UNLINK			9	/* unlink a key from a keyring */
+#define KEYCTL_SEARCH			10	/* search for a key in a keyring */
+#define KEYCTL_READ			11	/* read a key or keyring's contents */
+#define KEYCTL_INSTANTIATE		12	/* instantiate a partially constructed key */
+#define KEYCTL_NEGATE			13	/* negate a partially constructed key */
+#define KEYCTL_SET_REQKEY_KEYRING	14	/* set default request-key keyring */
+#define KEYCTL_SET_TIMEOUT		15	/* set key timeout */
+#define KEYCTL_ASSUME_AUTHORITY		16	/* assume request_key() authorisation */
+#define KEYCTL_GET_SECURITY		17	/* get key security label */
+#define KEYCTL_SESSION_TO_PARENT	18	/* apply session keyring to parent process */
+#define KEYCTL_REJECT			19	/* reject a partially constructed key */
+#define KEYCTL_INSTANTIATE_IOV		20	/* instantiate a partially constructed key */
+
+#endif /*  _LINUX_KEYCTL_H */
diff --git a/include/linux/keyreset.h b/include/linux/keyreset.h
new file mode 100644
index 00000000..a2ac49e5
--- /dev/null
+++ b/include/linux/keyreset.h
@@ -0,0 +1,28 @@
+/*
+ * include/linux/keyreset.h - platform data structure for resetkeys driver
+ *
+ * Copyright (C) 2008 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _LINUX_KEYRESET_H
+#define _LINUX_KEYRESET_H
+
+#define KEYRESET_NAME "keyreset"
+
+struct keyreset_platform_data {
+	int (*reset_fn)(void);
+	int *keys_up;
+	int keys_down[]; /* 0 terminated */
+};
+
+#endif /* _LINUX_KEYRESET_H */
diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h
new file mode 100644
index 00000000..10308c6a
--- /dev/null
+++ b/include/linux/kfifo.h
@@ -0,0 +1,852 @@
+/*
+ * A generic kernel FIFO implementation
+ *
+ * Copyright (C) 2009/2010 Stefani Seibold <stefani@seibold.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef _LINUX_KFIFO_H
+#define _LINUX_KFIFO_H
+
+/*
+ * How to porting drivers to the new generic FIFO API:
+ *
+ * - Modify the declaration of the "struct kfifo *" object into a
+ *   in-place "struct kfifo" object
+ * - Init the in-place object with kfifo_alloc() or kfifo_init()
+ *   Note: The address of the in-place "struct kfifo" object must be
+ *   passed as the first argument to this functions
+ * - Replace the use of __kfifo_put into kfifo_in and __kfifo_get
+ *   into kfifo_out
+ * - Replace the use of kfifo_put into kfifo_in_spinlocked and kfifo_get
+ *   into kfifo_out_spinlocked
+ *   Note: the spinlock pointer formerly passed to kfifo_init/kfifo_alloc
+ *   must be passed now to the kfifo_in_spinlocked and kfifo_out_spinlocked
+ *   as the last parameter
+ * - The formerly __kfifo_* functions are renamed into kfifo_*
+ */
+
+/*
+ * Note about locking : There is no locking required until only * one reader
+ * and one writer is using the fifo and no kfifo_reset() will be * called
+ *  kfifo_reset_out() can be safely used, until it will be only called
+ * in the reader thread.
+ *  For multiple writer and one reader there is only a need to lock the writer.
+ * And vice versa for only one writer and multiple reader there is only a need
+ * to lock the reader.
+ */
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/stddef.h>
+#include <linux/scatterlist.h>
+
+struct __kfifo {
+	unsigned int	in;
+	unsigned int	out;
+	unsigned int	mask;
+	unsigned int	esize;
+	void		*data;
+};
+
+#define __STRUCT_KFIFO_COMMON(datatype, recsize, ptrtype) \
+	union { \
+		struct __kfifo	kfifo; \
+		datatype	*type; \
+		char		(*rectype)[recsize]; \
+		ptrtype		*ptr; \
+		const ptrtype	*ptr_const; \
+	}
+
+#define __STRUCT_KFIFO(type, size, recsize, ptrtype) \
+{ \
+	__STRUCT_KFIFO_COMMON(type, recsize, ptrtype); \
+	type		buf[((size < 2) || (size & (size - 1))) ? -1 : size]; \
+}
+
+#define STRUCT_KFIFO(type, size) \
+	struct __STRUCT_KFIFO(type, size, 0, type)
+
+#define __STRUCT_KFIFO_PTR(type, recsize, ptrtype) \
+{ \
+	__STRUCT_KFIFO_COMMON(type, recsize, ptrtype); \
+	type		buf[0]; \
+}
+
+#define STRUCT_KFIFO_PTR(type) \
+	struct __STRUCT_KFIFO_PTR(type, 0, type)
+
+/*
+ * define compatibility "struct kfifo" for dynamic allocated fifos
+ */
+struct kfifo __STRUCT_KFIFO_PTR(unsigned char, 0, void);
+
+#define STRUCT_KFIFO_REC_1(size) \
+	struct __STRUCT_KFIFO(unsigned char, size, 1, void)
+
+#define STRUCT_KFIFO_REC_2(size) \
+	struct __STRUCT_KFIFO(unsigned char, size, 2, void)
+
+/*
+ * define kfifo_rec types
+ */
+struct kfifo_rec_ptr_1 __STRUCT_KFIFO_PTR(unsigned char, 1, void);
+struct kfifo_rec_ptr_2 __STRUCT_KFIFO_PTR(unsigned char, 2, void);
+
+/*
+ * helper macro to distinguish between real in place fifo where the fifo
+ * array is a part of the structure and the fifo type where the array is
+ * outside of the fifo structure.
+ */
+#define	__is_kfifo_ptr(fifo)	(sizeof(*fifo) == sizeof(struct __kfifo))
+
+/**
+ * DECLARE_KFIFO_PTR - macro to declare a fifo pointer object
+ * @fifo: name of the declared fifo
+ * @type: type of the fifo elements
+ */
+#define DECLARE_KFIFO_PTR(fifo, type)	STRUCT_KFIFO_PTR(type) fifo
+
+/**
+ * DECLARE_KFIFO - macro to declare a fifo object
+ * @fifo: name of the declared fifo
+ * @type: type of the fifo elements
+ * @size: the number of elements in the fifo, this must be a power of 2
+ */
+#define DECLARE_KFIFO(fifo, type, size)	STRUCT_KFIFO(type, size) fifo
+
+/**
+ * INIT_KFIFO - Initialize a fifo declared by DECLARE_KFIFO
+ * @fifo: name of the declared fifo datatype
+ */
+#define INIT_KFIFO(fifo) \
+(void)({ \
+	typeof(&(fifo)) __tmp = &(fifo); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	__kfifo->in = 0; \
+	__kfifo->out = 0; \
+	__kfifo->mask = __is_kfifo_ptr(__tmp) ? 0 : ARRAY_SIZE(__tmp->buf) - 1;\
+	__kfifo->esize = sizeof(*__tmp->buf); \
+	__kfifo->data = __is_kfifo_ptr(__tmp) ?  NULL : __tmp->buf; \
+})
+
+/**
+ * DEFINE_KFIFO - macro to define and initialize a fifo
+ * @fifo: name of the declared fifo datatype
+ * @type: type of the fifo elements
+ * @size: the number of elements in the fifo, this must be a power of 2
+ *
+ * Note: the macro can be used for global and local fifo data type variables.
+ */
+#define DEFINE_KFIFO(fifo, type, size) \
+	DECLARE_KFIFO(fifo, type, size) = \
+	(typeof(fifo)) { \
+		{ \
+			{ \
+			.in	= 0, \
+			.out	= 0, \
+			.mask	= __is_kfifo_ptr(&(fifo)) ? \
+				  0 : \
+				  ARRAY_SIZE((fifo).buf) - 1, \
+			.esize	= sizeof(*(fifo).buf), \
+			.data	= __is_kfifo_ptr(&(fifo)) ? \
+				NULL : \
+				(fifo).buf, \
+			} \
+		} \
+	}
+
+
+static inline unsigned int __must_check
+__kfifo_uint_must_check_helper(unsigned int val)
+{
+	return val;
+}
+
+static inline int __must_check
+__kfifo_int_must_check_helper(int val)
+{
+	return val;
+}
+
+/**
+ * kfifo_initialized - Check if the fifo is initialized
+ * @fifo: address of the fifo to check
+ *
+ * Return %true if fifo is initialized, otherwise %false.
+ * Assumes the fifo was 0 before.
+ */
+#define kfifo_initialized(fifo) ((fifo)->kfifo.mask)
+
+/**
+ * kfifo_esize - returns the size of the element managed by the fifo
+ * @fifo: address of the fifo to be used
+ */
+#define kfifo_esize(fifo)	((fifo)->kfifo.esize)
+
+/**
+ * kfifo_recsize - returns the size of the record length field
+ * @fifo: address of the fifo to be used
+ */
+#define kfifo_recsize(fifo)	(sizeof(*(fifo)->rectype))
+
+/**
+ * kfifo_size - returns the size of the fifo in elements
+ * @fifo: address of the fifo to be used
+ */
+#define kfifo_size(fifo)	((fifo)->kfifo.mask + 1)
+
+/**
+ * kfifo_reset - removes the entire fifo content
+ * @fifo: address of the fifo to be used
+ *
+ * Note: usage of kfifo_reset() is dangerous. It should be only called when the
+ * fifo is exclusived locked or when it is secured that no other thread is
+ * accessing the fifo.
+ */
+#define kfifo_reset(fifo) \
+(void)({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	__tmp->kfifo.in = __tmp->kfifo.out = 0; \
+})
+
+/**
+ * kfifo_reset_out - skip fifo content
+ * @fifo: address of the fifo to be used
+ *
+ * Note: The usage of kfifo_reset_out() is safe until it will be only called
+ * from the reader thread and there is only one concurrent reader. Otherwise
+ * it is dangerous and must be handled in the same way as kfifo_reset().
+ */
+#define kfifo_reset_out(fifo)	\
+(void)({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	__tmp->kfifo.out = __tmp->kfifo.in; \
+})
+
+/**
+ * kfifo_len - returns the number of used elements in the fifo
+ * @fifo: address of the fifo to be used
+ */
+#define kfifo_len(fifo) \
+({ \
+	typeof((fifo) + 1) __tmpl = (fifo); \
+	__tmpl->kfifo.in - __tmpl->kfifo.out; \
+})
+
+/**
+ * kfifo_is_empty - returns true if the fifo is empty
+ * @fifo: address of the fifo to be used
+ */
+#define	kfifo_is_empty(fifo) \
+({ \
+	typeof((fifo) + 1) __tmpq = (fifo); \
+	__tmpq->kfifo.in == __tmpq->kfifo.out; \
+})
+
+/**
+ * kfifo_is_full - returns true if the fifo is full
+ * @fifo: address of the fifo to be used
+ */
+#define	kfifo_is_full(fifo) \
+({ \
+	typeof((fifo) + 1) __tmpq = (fifo); \
+	kfifo_len(__tmpq) > __tmpq->kfifo.mask; \
+})
+
+/**
+ * kfifo_avail - returns the number of unused elements in the fifo
+ * @fifo: address of the fifo to be used
+ */
+#define	kfifo_avail(fifo) \
+__kfifo_uint_must_check_helper( \
+({ \
+	typeof((fifo) + 1) __tmpq = (fifo); \
+	const size_t __recsize = sizeof(*__tmpq->rectype); \
+	unsigned int __avail = kfifo_size(__tmpq) - kfifo_len(__tmpq); \
+	(__recsize) ? ((__avail <= __recsize) ? 0 : \
+	__kfifo_max_r(__avail - __recsize, __recsize)) : \
+	__avail; \
+}) \
+)
+
+/**
+ * kfifo_skip - skip output data
+ * @fifo: address of the fifo to be used
+ */
+#define	kfifo_skip(fifo) \
+(void)({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	const size_t __recsize = sizeof(*__tmp->rectype); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	if (__recsize) \
+		__kfifo_skip_r(__kfifo, __recsize); \
+	else \
+		__kfifo->out++; \
+})
+
+/**
+ * kfifo_peek_len - gets the size of the next fifo record
+ * @fifo: address of the fifo to be used
+ *
+ * This function returns the size of the next fifo record in number of bytes.
+ */
+#define kfifo_peek_len(fifo) \
+__kfifo_uint_must_check_helper( \
+({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	const size_t __recsize = sizeof(*__tmp->rectype); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	(!__recsize) ? kfifo_len(__tmp) * sizeof(*__tmp->type) : \
+	__kfifo_len_r(__kfifo, __recsize); \
+}) \
+)
+
+/**
+ * kfifo_alloc - dynamically allocates a new fifo buffer
+ * @fifo: pointer to the fifo
+ * @size: the number of elements in the fifo, this must be a power of 2
+ * @gfp_mask: get_free_pages mask, passed to kmalloc()
+ *
+ * This macro dynamically allocates a new fifo buffer.
+ *
+ * The numer of elements will be rounded-up to a power of 2.
+ * The fifo will be release with kfifo_free().
+ * Return 0 if no error, otherwise an error code.
+ */
+#define kfifo_alloc(fifo, size, gfp_mask) \
+__kfifo_int_must_check_helper( \
+({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	__is_kfifo_ptr(__tmp) ? \
+	__kfifo_alloc(__kfifo, size, sizeof(*__tmp->type), gfp_mask) : \
+	-EINVAL; \
+}) \
+)
+
+/**
+ * kfifo_free - frees the fifo
+ * @fifo: the fifo to be freed
+ */
+#define kfifo_free(fifo) \
+({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	if (__is_kfifo_ptr(__tmp)) \
+		__kfifo_free(__kfifo); \
+})
+
+/**
+ * kfifo_init - initialize a fifo using a preallocated buffer
+ * @fifo: the fifo to assign the buffer
+ * @buffer: the preallocated buffer to be used
+ * @size: the size of the internal buffer, this have to be a power of 2
+ *
+ * This macro initialize a fifo using a preallocated buffer.
+ *
+ * The numer of elements will be rounded-up to a power of 2.
+ * Return 0 if no error, otherwise an error code.
+ */
+#define kfifo_init(fifo, buffer, size) \
+({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	__is_kfifo_ptr(__tmp) ? \
+	__kfifo_init(__kfifo, buffer, size, sizeof(*__tmp->type)) : \
+	-EINVAL; \
+})
+
+/**
+ * kfifo_put - put data into the fifo
+ * @fifo: address of the fifo to be used
+ * @val: the data to be added
+ *
+ * This macro copies the given value into the fifo.
+ * It returns 0 if the fifo was full. Otherwise it returns the number
+ * processed elements.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macro.
+ */
+#define	kfifo_put(fifo, val) \
+({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	typeof((val) + 1) __val = (val); \
+	unsigned int __ret; \
+	const size_t __recsize = sizeof(*__tmp->rectype); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	if (0) { \
+		typeof(__tmp->ptr_const) __dummy __attribute__ ((unused)); \
+		__dummy = (typeof(__val))NULL; \
+	} \
+	if (__recsize) \
+		__ret = __kfifo_in_r(__kfifo, __val, sizeof(*__val), \
+			__recsize); \
+	else { \
+		__ret = !kfifo_is_full(__tmp); \
+		if (__ret) { \
+			(__is_kfifo_ptr(__tmp) ? \
+			((typeof(__tmp->type))__kfifo->data) : \
+			(__tmp->buf) \
+			)[__kfifo->in & __tmp->kfifo.mask] = \
+				*(typeof(__tmp->type))__val; \
+			smp_wmb(); \
+			__kfifo->in++; \
+		} \
+	} \
+	__ret; \
+})
+
+/**
+ * kfifo_get - get data from the fifo
+ * @fifo: address of the fifo to be used
+ * @val: the var where to store the data to be added
+ *
+ * This macro reads the data from the fifo.
+ * It returns 0 if the fifo was empty. Otherwise it returns the number
+ * processed elements.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macro.
+ */
+#define	kfifo_get(fifo, val) \
+__kfifo_uint_must_check_helper( \
+({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	typeof((val) + 1) __val = (val); \
+	unsigned int __ret; \
+	const size_t __recsize = sizeof(*__tmp->rectype); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	if (0) \
+		__val = (typeof(__tmp->ptr))0; \
+	if (__recsize) \
+		__ret = __kfifo_out_r(__kfifo, __val, sizeof(*__val), \
+			__recsize); \
+	else { \
+		__ret = !kfifo_is_empty(__tmp); \
+		if (__ret) { \
+			*(typeof(__tmp->type))__val = \
+				(__is_kfifo_ptr(__tmp) ? \
+				((typeof(__tmp->type))__kfifo->data) : \
+				(__tmp->buf) \
+				)[__kfifo->out & __tmp->kfifo.mask]; \
+			smp_wmb(); \
+			__kfifo->out++; \
+		} \
+	} \
+	__ret; \
+}) \
+)
+
+/**
+ * kfifo_peek - get data from the fifo without removing
+ * @fifo: address of the fifo to be used
+ * @val: the var where to store the data to be added
+ *
+ * This reads the data from the fifo without removing it from the fifo.
+ * It returns 0 if the fifo was empty. Otherwise it returns the number
+ * processed elements.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macro.
+ */
+#define	kfifo_peek(fifo, val) \
+__kfifo_uint_must_check_helper( \
+({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	typeof((val) + 1) __val = (val); \
+	unsigned int __ret; \
+	const size_t __recsize = sizeof(*__tmp->rectype); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	if (0) \
+		__val = (typeof(__tmp->ptr))NULL; \
+	if (__recsize) \
+		__ret = __kfifo_out_peek_r(__kfifo, __val, sizeof(*__val), \
+			__recsize); \
+	else { \
+		__ret = !kfifo_is_empty(__tmp); \
+		if (__ret) { \
+			*(typeof(__tmp->type))__val = \
+				(__is_kfifo_ptr(__tmp) ? \
+				((typeof(__tmp->type))__kfifo->data) : \
+				(__tmp->buf) \
+				)[__kfifo->out & __tmp->kfifo.mask]; \
+			smp_wmb(); \
+		} \
+	} \
+	__ret; \
+}) \
+)
+
+/**
+ * kfifo_in - put data into the fifo
+ * @fifo: address of the fifo to be used
+ * @buf: the data to be added
+ * @n: number of elements to be added
+ *
+ * This macro copies the given buffer into the fifo and returns the
+ * number of copied elements.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macro.
+ */
+#define	kfifo_in(fifo, buf, n) \
+({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	typeof((buf) + 1) __buf = (buf); \
+	unsigned long __n = (n); \
+	const size_t __recsize = sizeof(*__tmp->rectype); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	if (0) { \
+		typeof(__tmp->ptr_const) __dummy __attribute__ ((unused)); \
+		__dummy = (typeof(__buf))NULL; \
+	} \
+	(__recsize) ?\
+	__kfifo_in_r(__kfifo, __buf, __n, __recsize) : \
+	__kfifo_in(__kfifo, __buf, __n); \
+})
+
+/**
+ * kfifo_in_spinlocked - put data into the fifo using a spinlock for locking
+ * @fifo: address of the fifo to be used
+ * @buf: the data to be added
+ * @n: number of elements to be added
+ * @lock: pointer to the spinlock to use for locking
+ *
+ * This macro copies the given values buffer into the fifo and returns the
+ * number of copied elements.
+ */
+#define	kfifo_in_spinlocked(fifo, buf, n, lock) \
+({ \
+	unsigned long __flags; \
+	unsigned int __ret; \
+	spin_lock_irqsave(lock, __flags); \
+	__ret = kfifo_in(fifo, buf, n); \
+	spin_unlock_irqrestore(lock, __flags); \
+	__ret; \
+})
+
+/* alias for kfifo_in_spinlocked, will be removed in a future release */
+#define kfifo_in_locked(fifo, buf, n, lock) \
+		kfifo_in_spinlocked(fifo, buf, n, lock)
+
+/**
+ * kfifo_out - get data from the fifo
+ * @fifo: address of the fifo to be used
+ * @buf: pointer to the storage buffer
+ * @n: max. number of elements to get
+ *
+ * This macro get some data from the fifo and return the numbers of elements
+ * copied.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macro.
+ */
+#define	kfifo_out(fifo, buf, n) \
+__kfifo_uint_must_check_helper( \
+({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	typeof((buf) + 1) __buf = (buf); \
+	unsigned long __n = (n); \
+	const size_t __recsize = sizeof(*__tmp->rectype); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	if (0) { \
+		typeof(__tmp->ptr) __dummy = NULL; \
+		__buf = __dummy; \
+	} \
+	(__recsize) ?\
+	__kfifo_out_r(__kfifo, __buf, __n, __recsize) : \
+	__kfifo_out(__kfifo, __buf, __n); \
+}) \
+)
+
+/**
+ * kfifo_out_spinlocked - get data from the fifo using a spinlock for locking
+ * @fifo: address of the fifo to be used
+ * @buf: pointer to the storage buffer
+ * @n: max. number of elements to get
+ * @lock: pointer to the spinlock to use for locking
+ *
+ * This macro get the data from the fifo and return the numbers of elements
+ * copied.
+ */
+#define	kfifo_out_spinlocked(fifo, buf, n, lock) \
+__kfifo_uint_must_check_helper( \
+({ \
+	unsigned long __flags; \
+	unsigned int __ret; \
+	spin_lock_irqsave(lock, __flags); \
+	__ret = kfifo_out(fifo, buf, n); \
+	spin_unlock_irqrestore(lock, __flags); \
+	__ret; \
+}) \
+)
+
+/* alias for kfifo_out_spinlocked, will be removed in a future release */
+#define kfifo_out_locked(fifo, buf, n, lock) \
+		kfifo_out_spinlocked(fifo, buf, n, lock)
+
+/**
+ * kfifo_from_user - puts some data from user space into the fifo
+ * @fifo: address of the fifo to be used
+ * @from: pointer to the data to be added
+ * @len: the length of the data to be added
+ * @copied: pointer to output variable to store the number of copied bytes
+ *
+ * This macro copies at most @len bytes from the @from into the
+ * fifo, depending of the available space and returns -EFAULT/0.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macro.
+ */
+#define	kfifo_from_user(fifo, from, len, copied) \
+__kfifo_uint_must_check_helper( \
+({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	const void __user *__from = (from); \
+	unsigned int __len = (len); \
+	unsigned int *__copied = (copied); \
+	const size_t __recsize = sizeof(*__tmp->rectype); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	(__recsize) ? \
+	__kfifo_from_user_r(__kfifo, __from, __len,  __copied, __recsize) : \
+	__kfifo_from_user(__kfifo, __from, __len, __copied); \
+}) \
+)
+
+/**
+ * kfifo_to_user - copies data from the fifo into user space
+ * @fifo: address of the fifo to be used
+ * @to: where the data must be copied
+ * @len: the size of the destination buffer
+ * @copied: pointer to output variable to store the number of copied bytes
+ *
+ * This macro copies at most @len bytes from the fifo into the
+ * @to buffer and returns -EFAULT/0.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macro.
+ */
+#define	kfifo_to_user(fifo, to, len, copied) \
+__kfifo_uint_must_check_helper( \
+({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	void __user *__to = (to); \
+	unsigned int __len = (len); \
+	unsigned int *__copied = (copied); \
+	const size_t __recsize = sizeof(*__tmp->rectype); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	(__recsize) ? \
+	__kfifo_to_user_r(__kfifo, __to, __len, __copied, __recsize) : \
+	__kfifo_to_user(__kfifo, __to, __len, __copied); \
+}) \
+)
+
+/**
+ * kfifo_dma_in_prepare - setup a scatterlist for DMA input
+ * @fifo: address of the fifo to be used
+ * @sgl: pointer to the scatterlist array
+ * @nents: number of entries in the scatterlist array
+ * @len: number of elements to transfer
+ *
+ * This macro fills a scatterlist for DMA input.
+ * It returns the number entries in the scatterlist array.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macros.
+ */
+#define	kfifo_dma_in_prepare(fifo, sgl, nents, len) \
+({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	struct scatterlist *__sgl = (sgl); \
+	int __nents = (nents); \
+	unsigned int __len = (len); \
+	const size_t __recsize = sizeof(*__tmp->rectype); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	(__recsize) ? \
+	__kfifo_dma_in_prepare_r(__kfifo, __sgl, __nents, __len, __recsize) : \
+	__kfifo_dma_in_prepare(__kfifo, __sgl, __nents, __len); \
+})
+
+/**
+ * kfifo_dma_in_finish - finish a DMA IN operation
+ * @fifo: address of the fifo to be used
+ * @len: number of bytes to received
+ *
+ * This macro finish a DMA IN operation. The in counter will be updated by
+ * the len parameter. No error checking will be done.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macros.
+ */
+#define kfifo_dma_in_finish(fifo, len) \
+(void)({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	unsigned int __len = (len); \
+	const size_t __recsize = sizeof(*__tmp->rectype); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	if (__recsize) \
+		__kfifo_dma_in_finish_r(__kfifo, __len, __recsize); \
+	else \
+		__kfifo->in += __len / sizeof(*__tmp->type); \
+})
+
+/**
+ * kfifo_dma_out_prepare - setup a scatterlist for DMA output
+ * @fifo: address of the fifo to be used
+ * @sgl: pointer to the scatterlist array
+ * @nents: number of entries in the scatterlist array
+ * @len: number of elements to transfer
+ *
+ * This macro fills a scatterlist for DMA output which at most @len bytes
+ * to transfer.
+ * It returns the number entries in the scatterlist array.
+ * A zero means there is no space available and the scatterlist is not filled.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macros.
+ */
+#define	kfifo_dma_out_prepare(fifo, sgl, nents, len) \
+({ \
+	typeof((fifo) + 1) __tmp = (fifo);  \
+	struct scatterlist *__sgl = (sgl); \
+	int __nents = (nents); \
+	unsigned int __len = (len); \
+	const size_t __recsize = sizeof(*__tmp->rectype); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	(__recsize) ? \
+	__kfifo_dma_out_prepare_r(__kfifo, __sgl, __nents, __len, __recsize) : \
+	__kfifo_dma_out_prepare(__kfifo, __sgl, __nents, __len); \
+})
+
+/**
+ * kfifo_dma_out_finish - finish a DMA OUT operation
+ * @fifo: address of the fifo to be used
+ * @len: number of bytes transferd
+ *
+ * This macro finish a DMA OUT operation. The out counter will be updated by
+ * the len parameter. No error checking will be done.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macros.
+ */
+#define kfifo_dma_out_finish(fifo, len) \
+(void)({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	unsigned int __len = (len); \
+	const size_t __recsize = sizeof(*__tmp->rectype); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	if (__recsize) \
+		__kfifo_dma_out_finish_r(__kfifo, __recsize); \
+	else \
+		__kfifo->out += __len / sizeof(*__tmp->type); \
+})
+
+/**
+ * kfifo_out_peek - gets some data from the fifo
+ * @fifo: address of the fifo to be used
+ * @buf: pointer to the storage buffer
+ * @n: max. number of elements to get
+ *
+ * This macro get the data from the fifo and return the numbers of elements
+ * copied. The data is not removed from the fifo.
+ *
+ * Note that with only one concurrent reader and one concurrent
+ * writer, you don't need extra locking to use these macro.
+ */
+#define	kfifo_out_peek(fifo, buf, n) \
+__kfifo_uint_must_check_helper( \
+({ \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	typeof((buf) + 1) __buf = (buf); \
+	unsigned long __n = (n); \
+	const size_t __recsize = sizeof(*__tmp->rectype); \
+	struct __kfifo *__kfifo = &__tmp->kfifo; \
+	if (0) { \
+		typeof(__tmp->ptr) __dummy __attribute__ ((unused)) = NULL; \
+		__buf = __dummy; \
+	} \
+	(__recsize) ? \
+	__kfifo_out_peek_r(__kfifo, __buf, __n, __recsize) : \
+	__kfifo_out_peek(__kfifo, __buf, __n); \
+}) \
+)
+
+extern int __kfifo_alloc(struct __kfifo *fifo, unsigned int size,
+	size_t esize, gfp_t gfp_mask);
+
+extern void __kfifo_free(struct __kfifo *fifo);
+
+extern int __kfifo_init(struct __kfifo *fifo, void *buffer,
+	unsigned int size, size_t esize);
+
+extern unsigned int __kfifo_in(struct __kfifo *fifo,
+	const void *buf, unsigned int len);
+
+extern unsigned int __kfifo_out(struct __kfifo *fifo,
+	void *buf, unsigned int len);
+
+extern int __kfifo_from_user(struct __kfifo *fifo,
+	const void __user *from, unsigned long len, unsigned int *copied);
+
+extern int __kfifo_to_user(struct __kfifo *fifo,
+	void __user *to, unsigned long len, unsigned int *copied);
+
+extern unsigned int __kfifo_dma_in_prepare(struct __kfifo *fifo,
+	struct scatterlist *sgl, int nents, unsigned int len);
+
+extern unsigned int __kfifo_dma_out_prepare(struct __kfifo *fifo,
+	struct scatterlist *sgl, int nents, unsigned int len);
+
+extern unsigned int __kfifo_out_peek(struct __kfifo *fifo,
+	void *buf, unsigned int len);
+
+extern unsigned int __kfifo_in_r(struct __kfifo *fifo,
+	const void *buf, unsigned int len, size_t recsize);
+
+extern unsigned int __kfifo_out_r(struct __kfifo *fifo,
+	void *buf, unsigned int len, size_t recsize);
+
+extern int __kfifo_from_user_r(struct __kfifo *fifo,
+	const void __user *from, unsigned long len, unsigned int *copied,
+	size_t recsize);
+
+extern int __kfifo_to_user_r(struct __kfifo *fifo, void __user *to,
+	unsigned long len, unsigned int *copied, size_t recsize);
+
+extern unsigned int __kfifo_dma_in_prepare_r(struct __kfifo *fifo,
+	struct scatterlist *sgl, int nents, unsigned int len, size_t recsize);
+
+extern void __kfifo_dma_in_finish_r(struct __kfifo *fifo,
+	unsigned int len, size_t recsize);
+
+extern unsigned int __kfifo_dma_out_prepare_r(struct __kfifo *fifo,
+	struct scatterlist *sgl, int nents, unsigned int len, size_t recsize);
+
+extern void __kfifo_dma_out_finish_r(struct __kfifo *fifo, size_t recsize);
+
+extern unsigned int __kfifo_len_r(struct __kfifo *fifo, size_t recsize);
+
+extern void __kfifo_skip_r(struct __kfifo *fifo, size_t recsize);
+
+extern unsigned int __kfifo_out_peek_r(struct __kfifo *fifo,
+	void *buf, unsigned int len, size_t recsize);
+
+extern unsigned int __kfifo_max_r(unsigned int len, size_t recsize);
+
+#endif
diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h
new file mode 100644
index 00000000..c4d2fc19
--- /dev/null
+++ b/include/linux/kgdb.h
@@ -0,0 +1,313 @@
+/*
+ * This provides the callbacks and functions that KGDB needs to share between
+ * the core, I/O and arch-specific portions.
+ *
+ * Author: Amit Kale <amitkale@linsyssoft.com> and
+ *         Tom Rini <trini@kernel.crashing.org>
+ *
+ * 2001-2004 (c) Amit S. Kale and 2003-2005 (c) MontaVista Software, Inc.
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#ifndef _KGDB_H_
+#define _KGDB_H_
+
+#include <linux/serial_8250.h>
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <linux/atomic.h>
+#ifdef CONFIG_HAVE_ARCH_KGDB
+#include <asm/kgdb.h>
+#endif
+
+#ifdef CONFIG_KGDB
+struct pt_regs;
+
+/**
+ *	kgdb_skipexception - (optional) exit kgdb_handle_exception early
+ *	@exception: Exception vector number
+ *	@regs: Current &struct pt_regs.
+ *
+ *	On some architectures it is required to skip a breakpoint
+ *	exception when it occurs after a breakpoint has been removed.
+ *	This can be implemented in the architecture specific portion of kgdb.
+ */
+extern int kgdb_skipexception(int exception, struct pt_regs *regs);
+
+struct tasklet_struct;
+struct task_struct;
+struct uart_port;
+
+/**
+ *	kgdb_breakpoint - compiled in breakpoint
+ *
+ *	This will be implemented as a static inline per architecture.  This
+ *	function is called by the kgdb core to execute an architecture
+ *	specific trap to cause kgdb to enter the exception processing.
+ *
+ */
+void kgdb_breakpoint(void);
+
+extern int kgdb_connected;
+extern int kgdb_io_module_registered;
+
+extern atomic_t			kgdb_setting_breakpoint;
+extern atomic_t			kgdb_cpu_doing_single_step;
+
+extern struct task_struct	*kgdb_usethread;
+extern struct task_struct	*kgdb_contthread;
+
+enum kgdb_bptype {
+	BP_BREAKPOINT = 0,
+	BP_HARDWARE_BREAKPOINT,
+	BP_WRITE_WATCHPOINT,
+	BP_READ_WATCHPOINT,
+	BP_ACCESS_WATCHPOINT,
+	BP_POKE_BREAKPOINT,
+};
+
+enum kgdb_bpstate {
+	BP_UNDEFINED = 0,
+	BP_REMOVED,
+	BP_SET,
+	BP_ACTIVE
+};
+
+struct kgdb_bkpt {
+	unsigned long		bpt_addr;
+	unsigned char		saved_instr[BREAK_INSTR_SIZE];
+	enum kgdb_bptype	type;
+	enum kgdb_bpstate	state;
+};
+
+struct dbg_reg_def_t {
+	char *name;
+	int size;
+	int offset;
+};
+
+#ifndef DBG_MAX_REG_NUM
+#define DBG_MAX_REG_NUM 0
+#else
+extern struct dbg_reg_def_t dbg_reg_def[];
+extern char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs);
+extern int dbg_set_reg(int regno, void *mem, struct pt_regs *regs);
+#endif
+#ifndef KGDB_MAX_BREAKPOINTS
+# define KGDB_MAX_BREAKPOINTS	1000
+#endif
+
+#define KGDB_HW_BREAKPOINT	1
+
+/*
+ * Functions each KGDB-supporting architecture must provide:
+ */
+
+/**
+ *	kgdb_arch_init - Perform any architecture specific initalization.
+ *
+ *	This function will handle the initalization of any architecture
+ *	specific callbacks.
+ */
+extern int kgdb_arch_init(void);
+
+/**
+ *	kgdb_arch_exit - Perform any architecture specific uninitalization.
+ *
+ *	This function will handle the uninitalization of any architecture
+ *	specific callbacks, for dynamic registration and unregistration.
+ */
+extern void kgdb_arch_exit(void);
+
+/**
+ *	pt_regs_to_gdb_regs - Convert ptrace regs to GDB regs
+ *	@gdb_regs: A pointer to hold the registers in the order GDB wants.
+ *	@regs: The &struct pt_regs of the current process.
+ *
+ *	Convert the pt_regs in @regs into the format for registers that
+ *	GDB expects, stored in @gdb_regs.
+ */
+extern void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs);
+
+/**
+ *	sleeping_thread_to_gdb_regs - Convert ptrace regs to GDB regs
+ *	@gdb_regs: A pointer to hold the registers in the order GDB wants.
+ *	@p: The &struct task_struct of the desired process.
+ *
+ *	Convert the register values of the sleeping process in @p to
+ *	the format that GDB expects.
+ *	This function is called when kgdb does not have access to the
+ *	&struct pt_regs and therefore it should fill the gdb registers
+ *	@gdb_regs with what has	been saved in &struct thread_struct
+ *	thread field during switch_to.
+ */
+extern void
+sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p);
+
+/**
+ *	gdb_regs_to_pt_regs - Convert GDB regs to ptrace regs.
+ *	@gdb_regs: A pointer to hold the registers we've received from GDB.
+ *	@regs: A pointer to a &struct pt_regs to hold these values in.
+ *
+ *	Convert the GDB regs in @gdb_regs into the pt_regs, and store them
+ *	in @regs.
+ */
+extern void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs);
+
+/**
+ *	kgdb_arch_handle_exception - Handle architecture specific GDB packets.
+ *	@vector: The error vector of the exception that happened.
+ *	@signo: The signal number of the exception that happened.
+ *	@err_code: The error code of the exception that happened.
+ *	@remcom_in_buffer: The buffer of the packet we have read.
+ *	@remcom_out_buffer: The buffer of %BUFMAX bytes to write a packet into.
+ *	@regs: The &struct pt_regs of the current process.
+ *
+ *	This function MUST handle the 'c' and 's' command packets,
+ *	as well packets to set / remove a hardware breakpoint, if used.
+ *	If there are additional packets which the hardware needs to handle,
+ *	they are handled here.  The code should return -1 if it wants to
+ *	process more packets, and a %0 or %1 if it wants to exit from the
+ *	kgdb callback.
+ */
+extern int
+kgdb_arch_handle_exception(int vector, int signo, int err_code,
+			   char *remcom_in_buffer,
+			   char *remcom_out_buffer,
+			   struct pt_regs *regs);
+
+/**
+ *	kgdb_roundup_cpus - Get other CPUs into a holding pattern
+ *	@flags: Current IRQ state
+ *
+ *	On SMP systems, we need to get the attention of the other CPUs
+ *	and get them into a known state.  This should do what is needed
+ *	to get the other CPUs to call kgdb_wait(). Note that on some arches,
+ *	the NMI approach is not used for rounding up all the CPUs. For example,
+ *	in case of MIPS, smp_call_function() is used to roundup CPUs. In
+ *	this case, we have to make sure that interrupts are enabled before
+ *	calling smp_call_function(). The argument to this function is
+ *	the flags that will be used when restoring the interrupts. There is
+ *	local_irq_save() call before kgdb_roundup_cpus().
+ *
+ *	On non-SMP systems, this is not called.
+ */
+extern void kgdb_roundup_cpus(unsigned long flags);
+
+/**
+ *	kgdb_arch_set_pc - Generic call back to the program counter
+ *	@regs: Current &struct pt_regs.
+ *  @pc: The new value for the program counter
+ *
+ *	This function handles updating the program counter and requires an
+ *	architecture specific implementation.
+ */
+extern void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc);
+
+
+/* Optional functions. */
+extern int kgdb_validate_break_address(unsigned long addr);
+extern int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt);
+extern int kgdb_arch_remove_breakpoint(struct kgdb_bkpt *bpt);
+
+/**
+ *	kgdb_arch_late - Perform any architecture specific initalization.
+ *
+ *	This function will handle the late initalization of any
+ *	architecture specific callbacks.  This is an optional function for
+ *	handling things like late initialization of hw breakpoints.  The
+ *	default implementation does nothing.
+ */
+extern void kgdb_arch_late(void);
+
+
+/**
+ * struct kgdb_arch - Describe architecture specific values.
+ * @gdb_bpt_instr: The instruction to trigger a breakpoint.
+ * @flags: Flags for the breakpoint, currently just %KGDB_HW_BREAKPOINT.
+ * @set_breakpoint: Allow an architecture to specify how to set a software
+ * breakpoint.
+ * @remove_breakpoint: Allow an architecture to specify how to remove a
+ * software breakpoint.
+ * @set_hw_breakpoint: Allow an architecture to specify how to set a hardware
+ * breakpoint.
+ * @remove_hw_breakpoint: Allow an architecture to specify how to remove a
+ * hardware breakpoint.
+ * @disable_hw_break: Allow an architecture to specify how to disable
+ * hardware breakpoints for a single cpu.
+ * @remove_all_hw_break: Allow an architecture to specify how to remove all
+ * hardware breakpoints.
+ * @correct_hw_break: Allow an architecture to specify how to correct the
+ * hardware debug registers.
+ */
+struct kgdb_arch {
+	unsigned char		gdb_bpt_instr[BREAK_INSTR_SIZE];
+	unsigned long		flags;
+
+	int	(*set_breakpoint)(unsigned long, char *);
+	int	(*remove_breakpoint)(unsigned long, char *);
+	int	(*set_hw_breakpoint)(unsigned long, int, enum kgdb_bptype);
+	int	(*remove_hw_breakpoint)(unsigned long, int, enum kgdb_bptype);
+	void	(*disable_hw_break)(struct pt_regs *regs);
+	void	(*remove_all_hw_break)(void);
+	void	(*correct_hw_break)(void);
+};
+
+/**
+ * struct kgdb_io - Describe the interface for an I/O driver to talk with KGDB.
+ * @name: Name of the I/O driver.
+ * @read_char: Pointer to a function that will return one char.
+ * @write_char: Pointer to a function that will write one char.
+ * @flush: Pointer to a function that will flush any pending writes.
+ * @init: Pointer to a function that will initialize the device.
+ * @pre_exception: Pointer to a function that will do any prep work for
+ * the I/O driver.
+ * @post_exception: Pointer to a function that will do any cleanup work
+ * for the I/O driver.
+ * @is_console: 1 if the end device is a console 0 if the I/O device is
+ * not a console
+ */
+struct kgdb_io {
+	const char		*name;
+	int			(*read_char) (void);
+	void			(*write_char) (u8);
+	void			(*flush) (void);
+	int			(*init) (void);
+	void			(*pre_exception) (void);
+	void			(*post_exception) (void);
+	int			is_console;
+};
+
+extern struct kgdb_arch		arch_kgdb_ops;
+
+extern unsigned long __weak kgdb_arch_pc(int exception, struct pt_regs *regs);
+
+extern int kgdb_register_io_module(struct kgdb_io *local_kgdb_io_ops);
+extern void kgdb_unregister_io_module(struct kgdb_io *local_kgdb_io_ops);
+extern struct kgdb_io *dbg_io_ops;
+
+extern int kgdb_hex2long(char **ptr, unsigned long *long_val);
+extern char *kgdb_mem2hex(char *mem, char *buf, int count);
+extern int kgdb_hex2mem(char *buf, char *mem, int count);
+
+extern int kgdb_isremovedbreak(unsigned long addr);
+extern void kgdb_schedule_breakpoint(void);
+
+extern int
+kgdb_handle_exception(int ex_vector, int signo, int err_code,
+		      struct pt_regs *regs);
+extern int kgdb_nmicallback(int cpu, void *regs);
+extern void gdbstub_exit(int status);
+
+extern int			kgdb_single_step;
+extern atomic_t			kgdb_active;
+#define in_dbg_master() \
+	(raw_smp_processor_id() == atomic_read(&kgdb_active))
+extern bool dbg_is_early;
+extern void __init dbg_late_init(void);
+#else /* ! CONFIG_KGDB */
+#define in_dbg_master() (0)
+#define dbg_late_init()
+#endif /* ! CONFIG_KGDB */
+#endif /* _KGDB_H_ */
diff --git a/include/linux/khugepaged.h b/include/linux/khugepaged.h
new file mode 100644
index 00000000..6b394f0b
--- /dev/null
+++ b/include/linux/khugepaged.h
@@ -0,0 +1,67 @@
+#ifndef _LINUX_KHUGEPAGED_H
+#define _LINUX_KHUGEPAGED_H
+
+#include <linux/sched.h> /* MMF_VM_HUGEPAGE */
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+extern int __khugepaged_enter(struct mm_struct *mm);
+extern void __khugepaged_exit(struct mm_struct *mm);
+extern int khugepaged_enter_vma_merge(struct vm_area_struct *vma);
+
+#define khugepaged_enabled()					       \
+	(transparent_hugepage_flags &				       \
+	 ((1<<TRANSPARENT_HUGEPAGE_FLAG) |		       \
+	  (1<<TRANSPARENT_HUGEPAGE_REQ_MADV_FLAG)))
+#define khugepaged_always()				\
+	(transparent_hugepage_flags &			\
+	 (1<<TRANSPARENT_HUGEPAGE_FLAG))
+#define khugepaged_req_madv()					\
+	(transparent_hugepage_flags &				\
+	 (1<<TRANSPARENT_HUGEPAGE_REQ_MADV_FLAG))
+#define khugepaged_defrag()					\
+	(transparent_hugepage_flags &				\
+	 (1<<TRANSPARENT_HUGEPAGE_DEFRAG_KHUGEPAGED_FLAG))
+
+static inline int khugepaged_fork(struct mm_struct *mm, struct mm_struct *oldmm)
+{
+	if (test_bit(MMF_VM_HUGEPAGE, &oldmm->flags))
+		return __khugepaged_enter(mm);
+	return 0;
+}
+
+static inline void khugepaged_exit(struct mm_struct *mm)
+{
+	if (test_bit(MMF_VM_HUGEPAGE, &mm->flags))
+		__khugepaged_exit(mm);
+}
+
+static inline int khugepaged_enter(struct vm_area_struct *vma)
+{
+	if (!test_bit(MMF_VM_HUGEPAGE, &vma->vm_mm->flags))
+		if ((khugepaged_always() ||
+		     (khugepaged_req_madv() &&
+		      vma->vm_flags & VM_HUGEPAGE)) &&
+		    !(vma->vm_flags & VM_NOHUGEPAGE))
+			if (__khugepaged_enter(vma->vm_mm))
+				return -ENOMEM;
+	return 0;
+}
+#else /* CONFIG_TRANSPARENT_HUGEPAGE */
+static inline int khugepaged_fork(struct mm_struct *mm, struct mm_struct *oldmm)
+{
+	return 0;
+}
+static inline void khugepaged_exit(struct mm_struct *mm)
+{
+}
+static inline int khugepaged_enter(struct vm_area_struct *vma)
+{
+	return 0;
+}
+static inline int khugepaged_enter_vma_merge(struct vm_area_struct *vma)
+{
+	return 0;
+}
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+
+#endif /* _LINUX_KHUGEPAGED_H */
diff --git a/include/linux/klist.h b/include/linux/klist.h
new file mode 100644
index 00000000..a370ce57
--- /dev/null
+++ b/include/linux/klist.h
@@ -0,0 +1,68 @@
+/*
+ *	klist.h - Some generic list helpers, extending struct list_head a bit.
+ *
+ *	Implementations are found in lib/klist.c
+ *
+ *
+ *	Copyright (C) 2005 Patrick Mochel
+ *
+ *	This file is rleased under the GPL v2.
+ */
+
+#ifndef _LINUX_KLIST_H
+#define _LINUX_KLIST_H
+
+#include <linux/spinlock.h>
+#include <linux/kref.h>
+#include <linux/list.h>
+
+struct klist_node;
+struct klist {
+	spinlock_t		k_lock;
+	struct list_head	k_list;
+	void			(*get)(struct klist_node *);
+	void			(*put)(struct klist_node *);
+} __attribute__ ((aligned (sizeof(void *))));
+
+#define KLIST_INIT(_name, _get, _put)					\
+	{ .k_lock	= __SPIN_LOCK_UNLOCKED(_name.k_lock),		\
+	  .k_list	= LIST_HEAD_INIT(_name.k_list),			\
+	  .get		= _get,						\
+	  .put		= _put, }
+
+#define DEFINE_KLIST(_name, _get, _put)					\
+	struct klist _name = KLIST_INIT(_name, _get, _put)
+
+extern void klist_init(struct klist *k, void (*get)(struct klist_node *),
+		       void (*put)(struct klist_node *));
+
+struct klist_node {
+	void			*n_klist;	/* never access directly */
+	struct list_head	n_node;
+	struct kref		n_ref;
+};
+
+extern void klist_add_tail(struct klist_node *n, struct klist *k);
+extern void klist_add_head(struct klist_node *n, struct klist *k);
+extern void klist_add_after(struct klist_node *n, struct klist_node *pos);
+extern void klist_add_before(struct klist_node *n, struct klist_node *pos);
+
+extern void klist_del(struct klist_node *n);
+extern void klist_remove(struct klist_node *n);
+
+extern int klist_node_attached(struct klist_node *n);
+
+
+struct klist_iter {
+	struct klist		*i_klist;
+	struct klist_node	*i_cur;
+};
+
+
+extern void klist_iter_init(struct klist *k, struct klist_iter *i);
+extern void klist_iter_init_node(struct klist *k, struct klist_iter *i,
+				 struct klist_node *n);
+extern void klist_iter_exit(struct klist_iter *i);
+extern struct klist_node *klist_next(struct klist_iter *i);
+
+#endif
diff --git a/include/linux/kmalloc_sizes.h b/include/linux/kmalloc_sizes.h
new file mode 100644
index 00000000..e576b848
--- /dev/null
+++ b/include/linux/kmalloc_sizes.h
@@ -0,0 +1,45 @@
+#if (PAGE_SIZE == 4096)
+	CACHE(32)
+#endif
+	CACHE(64)
+#if L1_CACHE_BYTES < 64
+	CACHE(96)
+#endif
+	CACHE(128)
+#if L1_CACHE_BYTES < 128
+	CACHE(192)
+#endif
+	CACHE(256)
+	CACHE(512)
+	CACHE(1024)
+	CACHE(2048)
+	CACHE(4096)
+	CACHE(8192)
+	CACHE(16384)
+	CACHE(32768)
+	CACHE(65536)
+	CACHE(131072)
+#if KMALLOC_MAX_SIZE >= 262144
+	CACHE(262144)
+#endif
+#if KMALLOC_MAX_SIZE >= 524288
+	CACHE(524288)
+#endif
+#if KMALLOC_MAX_SIZE >= 1048576
+	CACHE(1048576)
+#endif
+#if KMALLOC_MAX_SIZE >= 2097152
+	CACHE(2097152)
+#endif
+#if KMALLOC_MAX_SIZE >= 4194304
+	CACHE(4194304)
+#endif
+#if KMALLOC_MAX_SIZE >= 8388608
+	CACHE(8388608)
+#endif
+#if KMALLOC_MAX_SIZE >= 16777216
+	CACHE(16777216)
+#endif
+#if KMALLOC_MAX_SIZE >= 33554432
+	CACHE(33554432)
+#endif
diff --git a/include/linux/kmemcheck.h b/include/linux/kmemcheck.h
new file mode 100644
index 00000000..39f84532
--- /dev/null
+++ b/include/linux/kmemcheck.h
@@ -0,0 +1,171 @@
+#ifndef LINUX_KMEMCHECK_H
+#define LINUX_KMEMCHECK_H
+
+#include <linux/mm_types.h>
+#include <linux/types.h>
+
+#ifdef CONFIG_KMEMCHECK
+extern int kmemcheck_enabled;
+
+/* The slab-related functions. */
+void kmemcheck_alloc_shadow(struct page *page, int order, gfp_t flags, int node);
+void kmemcheck_free_shadow(struct page *page, int order);
+void kmemcheck_slab_alloc(struct kmem_cache *s, gfp_t gfpflags, void *object,
+			  size_t size);
+void kmemcheck_slab_free(struct kmem_cache *s, void *object, size_t size);
+
+void kmemcheck_pagealloc_alloc(struct page *p, unsigned int order,
+			       gfp_t gfpflags);
+
+void kmemcheck_show_pages(struct page *p, unsigned int n);
+void kmemcheck_hide_pages(struct page *p, unsigned int n);
+
+bool kmemcheck_page_is_tracked(struct page *p);
+
+void kmemcheck_mark_unallocated(void *address, unsigned int n);
+void kmemcheck_mark_uninitialized(void *address, unsigned int n);
+void kmemcheck_mark_initialized(void *address, unsigned int n);
+void kmemcheck_mark_freed(void *address, unsigned int n);
+
+void kmemcheck_mark_unallocated_pages(struct page *p, unsigned int n);
+void kmemcheck_mark_uninitialized_pages(struct page *p, unsigned int n);
+void kmemcheck_mark_initialized_pages(struct page *p, unsigned int n);
+
+int kmemcheck_show_addr(unsigned long address);
+int kmemcheck_hide_addr(unsigned long address);
+
+bool kmemcheck_is_obj_initialized(unsigned long addr, size_t size);
+
+/*
+ * Bitfield annotations
+ *
+ * How to use: If you have a struct using bitfields, for example
+ *
+ *     struct a {
+ *             int x:8, y:8;
+ *     };
+ *
+ * then this should be rewritten as
+ *
+ *     struct a {
+ *             kmemcheck_bitfield_begin(flags);
+ *             int x:8, y:8;
+ *             kmemcheck_bitfield_end(flags);
+ *     };
+ *
+ * Now the "flags_begin" and "flags_end" members may be used to refer to the
+ * beginning and end, respectively, of the bitfield (and things like
+ * &x.flags_begin is allowed). As soon as the struct is allocated, the bit-
+ * fields should be annotated:
+ *
+ *     struct a *a = kmalloc(sizeof(struct a), GFP_KERNEL);
+ *     kmemcheck_annotate_bitfield(a, flags);
+ */
+#define kmemcheck_bitfield_begin(name)	\
+	int name##_begin[0];
+
+#define kmemcheck_bitfield_end(name)	\
+	int name##_end[0];
+
+#define kmemcheck_annotate_bitfield(ptr, name)				\
+	do {								\
+		int _n;							\
+									\
+		if (!ptr)						\
+			break;						\
+									\
+		_n = (long) &((ptr)->name##_end)			\
+			- (long) &((ptr)->name##_begin);		\
+		BUILD_BUG_ON(_n < 0);					\
+									\
+		kmemcheck_mark_initialized(&((ptr)->name##_begin), _n);	\
+	} while (0)
+
+#define kmemcheck_annotate_variable(var)				\
+	do {								\
+		kmemcheck_mark_initialized(&(var), sizeof(var));	\
+	} while (0)							\
+
+#else
+#define kmemcheck_enabled 0
+
+static inline void
+kmemcheck_alloc_shadow(struct page *page, int order, gfp_t flags, int node)
+{
+}
+
+static inline void
+kmemcheck_free_shadow(struct page *page, int order)
+{
+}
+
+static inline void
+kmemcheck_slab_alloc(struct kmem_cache *s, gfp_t gfpflags, void *object,
+		     size_t size)
+{
+}
+
+static inline void kmemcheck_slab_free(struct kmem_cache *s, void *object,
+				       size_t size)
+{
+}
+
+static inline void kmemcheck_pagealloc_alloc(struct page *p,
+	unsigned int order, gfp_t gfpflags)
+{
+}
+
+static inline bool kmemcheck_page_is_tracked(struct page *p)
+{
+	return false;
+}
+
+static inline void kmemcheck_mark_unallocated(void *address, unsigned int n)
+{
+}
+
+static inline void kmemcheck_mark_uninitialized(void *address, unsigned int n)
+{
+}
+
+static inline void kmemcheck_mark_initialized(void *address, unsigned int n)
+{
+}
+
+static inline void kmemcheck_mark_freed(void *address, unsigned int n)
+{
+}
+
+static inline void kmemcheck_mark_unallocated_pages(struct page *p,
+						    unsigned int n)
+{
+}
+
+static inline void kmemcheck_mark_uninitialized_pages(struct page *p,
+						      unsigned int n)
+{
+}
+
+static inline void kmemcheck_mark_initialized_pages(struct page *p,
+						    unsigned int n)
+{
+}
+
+static inline bool kmemcheck_is_obj_initialized(unsigned long addr, size_t size)
+{
+	return true;
+}
+
+#define kmemcheck_bitfield_begin(name)
+#define kmemcheck_bitfield_end(name)
+#define kmemcheck_annotate_bitfield(ptr, name)	\
+	do {					\
+	} while (0)
+
+#define kmemcheck_annotate_variable(var)	\
+	do {					\
+	} while (0)
+
+#endif /* CONFIG_KMEMCHECK */
+
+#endif /* LINUX_KMEMCHECK_H */
diff --git a/include/linux/kmemleak.h b/include/linux/kmemleak.h
new file mode 100644
index 00000000..2a5e5548
--- /dev/null
+++ b/include/linux/kmemleak.h
@@ -0,0 +1,106 @@
+/*
+ * include/linux/kmemleak.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ * Written by Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __KMEMLEAK_H
+#define __KMEMLEAK_H
+
+#ifdef CONFIG_DEBUG_KMEMLEAK
+
+extern void kmemleak_init(void) __ref;
+extern void kmemleak_alloc(const void *ptr, size_t size, int min_count,
+			   gfp_t gfp) __ref;
+extern void kmemleak_alloc_percpu(const void __percpu *ptr, size_t size) __ref;
+extern void kmemleak_free(const void *ptr) __ref;
+extern void kmemleak_free_part(const void *ptr, size_t size) __ref;
+extern void kmemleak_free_percpu(const void __percpu *ptr) __ref;
+extern void kmemleak_padding(const void *ptr, unsigned long offset,
+			     size_t size) __ref;
+extern void kmemleak_not_leak(const void *ptr) __ref;
+extern void kmemleak_ignore(const void *ptr) __ref;
+extern void kmemleak_scan_area(const void *ptr, size_t size, gfp_t gfp) __ref;
+extern void kmemleak_no_scan(const void *ptr) __ref;
+
+static inline void kmemleak_alloc_recursive(const void *ptr, size_t size,
+					    int min_count, unsigned long flags,
+					    gfp_t gfp)
+{
+	if (!(flags & SLAB_NOLEAKTRACE))
+		kmemleak_alloc(ptr, size, min_count, gfp);
+}
+
+static inline void kmemleak_free_recursive(const void *ptr, unsigned long flags)
+{
+	if (!(flags & SLAB_NOLEAKTRACE))
+		kmemleak_free(ptr);
+}
+
+static inline void kmemleak_erase(void **ptr)
+{
+	*ptr = NULL;
+}
+
+#else
+
+static inline void kmemleak_init(void)
+{
+}
+static inline void kmemleak_alloc(const void *ptr, size_t size, int min_count,
+				  gfp_t gfp)
+{
+}
+static inline void kmemleak_alloc_recursive(const void *ptr, size_t size,
+					    int min_count, unsigned long flags,
+					    gfp_t gfp)
+{
+}
+static inline void kmemleak_alloc_percpu(const void __percpu *ptr, size_t size)
+{
+}
+static inline void kmemleak_free(const void *ptr)
+{
+}
+static inline void kmemleak_free_part(const void *ptr, size_t size)
+{
+}
+static inline void kmemleak_free_recursive(const void *ptr, unsigned long flags)
+{
+}
+static inline void kmemleak_free_percpu(const void __percpu *ptr)
+{
+}
+static inline void kmemleak_not_leak(const void *ptr)
+{
+}
+static inline void kmemleak_ignore(const void *ptr)
+{
+}
+static inline void kmemleak_scan_area(const void *ptr, size_t size, gfp_t gfp)
+{
+}
+static inline void kmemleak_erase(void **ptr)
+{
+}
+static inline void kmemleak_no_scan(const void *ptr)
+{
+}
+
+#endif	/* CONFIG_DEBUG_KMEMLEAK */
+
+#endif	/* __KMEMLEAK_H */
diff --git a/include/linux/kmod.h b/include/linux/kmod.h
new file mode 100644
index 00000000..dd99c329
--- /dev/null
+++ b/include/linux/kmod.h
@@ -0,0 +1,138 @@
+#ifndef __LINUX_KMOD_H__
+#define __LINUX_KMOD_H__
+
+/*
+ *	include/linux/kmod.h
+ *
+ *      This program is free software; you can redistribute it and/or modify
+ *      it under the terms of the GNU General Public License as published by
+ *      the Free Software Foundation; either version 2 of the License, or
+ *      (at your option) any later version.
+ *
+ *      This program is distributed in the hope that it will be useful,
+ *      but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *      GNU General Public License for more details.
+ *
+ *      You should have received a copy of the GNU General Public License
+ *      along with this program; if not, write to the Free Software
+ *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/gfp.h>
+#include <linux/stddef.h>
+#include <linux/errno.h>
+#include <linux/compiler.h>
+#include <linux/workqueue.h>
+#include <linux/sysctl.h>
+
+#define KMOD_PATH_LEN 256
+
+#ifdef CONFIG_MODULES
+extern char modprobe_path[]; /* for sysctl */
+/* modprobe exit status on success, -ve on error.  Return value
+ * usually useless though. */
+extern __printf(2, 3)
+int __request_module(bool wait, const char *name, ...);
+#define request_module(mod...) __request_module(true, mod)
+#define request_module_nowait(mod...) __request_module(false, mod)
+#define try_then_request_module(x, mod...) \
+	((x) ?: (__request_module(true, mod), (x)))
+#else
+static inline int request_module(const char *name, ...) { return -ENOSYS; }
+static inline int request_module_nowait(const char *name, ...) { return -ENOSYS; }
+#define try_then_request_module(x, mod...) (x)
+#endif
+
+
+struct cred;
+struct file;
+
+#define UMH_NO_WAIT	0	/* don't wait at all */
+#define UMH_WAIT_EXEC	1	/* wait for the exec, but not the process */
+#define UMH_WAIT_PROC	2	/* wait for the process to complete */
+#define UMH_KILLABLE	4	/* wait for EXEC/PROC killable */
+
+struct subprocess_info {
+	struct work_struct work;
+	struct completion *complete;
+	char *path;
+	char **argv;
+	char **envp;
+	int wait;
+	int retval;
+	int (*init)(struct subprocess_info *info, struct cred *new);
+	void (*cleanup)(struct subprocess_info *info);
+	void *data;
+};
+
+/* Allocate a subprocess_info structure */
+struct subprocess_info *call_usermodehelper_setup(char *path, char **argv,
+						  char **envp, gfp_t gfp_mask);
+
+/* Set various pieces of state into the subprocess_info structure */
+void call_usermodehelper_setfns(struct subprocess_info *info,
+		    int (*init)(struct subprocess_info *info, struct cred *new),
+		    void (*cleanup)(struct subprocess_info *info),
+		    void *data);
+
+/* Actually execute the sub-process */
+int call_usermodehelper_exec(struct subprocess_info *info, int wait);
+
+/* Free the subprocess_info. This is only needed if you're not going
+   to call call_usermodehelper_exec */
+void call_usermodehelper_freeinfo(struct subprocess_info *info);
+
+static inline int
+call_usermodehelper_fns(char *path, char **argv, char **envp, int wait,
+			int (*init)(struct subprocess_info *info, struct cred *new),
+			void (*cleanup)(struct subprocess_info *), void *data)
+{
+	struct subprocess_info *info;
+	gfp_t gfp_mask = (wait == UMH_NO_WAIT) ? GFP_ATOMIC : GFP_KERNEL;
+
+	info = call_usermodehelper_setup(path, argv, envp, gfp_mask);
+
+	if (info == NULL)
+		return -ENOMEM;
+
+	call_usermodehelper_setfns(info, init, cleanup, data);
+
+	return call_usermodehelper_exec(info, wait);
+}
+
+static inline int
+call_usermodehelper(char *path, char **argv, char **envp, int wait)
+{
+	return call_usermodehelper_fns(path, argv, envp, wait,
+				       NULL, NULL, NULL);
+}
+
+extern struct ctl_table usermodehelper_table[];
+
+enum umh_disable_depth {
+	UMH_ENABLED = 0,
+	UMH_FREEZING,
+	UMH_DISABLED,
+};
+
+extern void usermodehelper_init(void);
+
+extern int __usermodehelper_disable(enum umh_disable_depth depth);
+extern void __usermodehelper_set_disable_depth(enum umh_disable_depth depth);
+
+static inline int usermodehelper_disable(void)
+{
+	return __usermodehelper_disable(UMH_DISABLED);
+}
+
+static inline void usermodehelper_enable(void)
+{
+	__usermodehelper_set_disable_depth(UMH_ENABLED);
+}
+
+extern int usermodehelper_read_trylock(void);
+extern long usermodehelper_read_lock_wait(long timeout);
+extern void usermodehelper_read_unlock(void);
+
+#endif /* __LINUX_KMOD_H__ */
diff --git a/include/linux/kmsg_dump.h b/include/linux/kmsg_dump.h
new file mode 100644
index 00000000..35f7237e
--- /dev/null
+++ b/include/linux/kmsg_dump.h
@@ -0,0 +1,70 @@
+/*
+ * linux/include/kmsg_dump.h
+ *
+ * Copyright (C) 2009 Net Insight AB
+ *
+ * Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+#ifndef _LINUX_KMSG_DUMP_H
+#define _LINUX_KMSG_DUMP_H
+
+#include <linux/errno.h>
+#include <linux/list.h>
+
+/*
+ * Keep this list arranged in rough order of priority. Anything listed after
+ * KMSG_DUMP_OOPS will not be logged by default unless printk.always_kmsg_dump
+ * is passed to the kernel.
+ */
+enum kmsg_dump_reason {
+	KMSG_DUMP_PANIC,
+	KMSG_DUMP_OOPS,
+	KMSG_DUMP_EMERG,
+	KMSG_DUMP_RESTART,
+	KMSG_DUMP_HALT,
+	KMSG_DUMP_POWEROFF,
+};
+
+/**
+ * struct kmsg_dumper - kernel crash message dumper structure
+ * @dump:	The callback which gets called on crashes. The buffer is passed
+ * 		as two sections, where s1 (length l1) contains the older
+ * 		messages and s2 (length l2) contains the newer.
+ * @list:	Entry in the dumper list (private)
+ * @registered:	Flag that specifies if this is already registered
+ */
+struct kmsg_dumper {
+	void (*dump)(struct kmsg_dumper *dumper, enum kmsg_dump_reason reason,
+			const char *s1, unsigned long l1,
+			const char *s2, unsigned long l2);
+	struct list_head list;
+	int registered;
+};
+
+#ifdef CONFIG_PRINTK
+void kmsg_dump(enum kmsg_dump_reason reason);
+
+int kmsg_dump_register(struct kmsg_dumper *dumper);
+
+int kmsg_dump_unregister(struct kmsg_dumper *dumper);
+#else
+static inline void kmsg_dump(enum kmsg_dump_reason reason)
+{
+}
+
+static inline int kmsg_dump_register(struct kmsg_dumper *dumper)
+{
+	return -EINVAL;
+}
+
+static inline int kmsg_dump_unregister(struct kmsg_dumper *dumper)
+{
+	return -EINVAL;
+}
+#endif
+
+#endif /* _LINUX_KMSG_DUMP_H */
diff --git a/include/linux/kobj_map.h b/include/linux/kobj_map.h
new file mode 100644
index 00000000..18ca75ff
--- /dev/null
+++ b/include/linux/kobj_map.h
@@ -0,0 +1,19 @@
+/*
+ * kobj_map.h
+ */
+
+#ifndef _KOBJ_MAP_H_
+#define _KOBJ_MAP_H_
+
+#include <linux/mutex.h>
+
+typedef struct kobject *kobj_probe_t(dev_t, int *, void *);
+struct kobj_map;
+
+int kobj_map(struct kobj_map *, dev_t, unsigned long, struct module *,
+	     kobj_probe_t *, int (*)(dev_t, void *), void *);
+void kobj_unmap(struct kobj_map *, dev_t, unsigned long);
+struct kobject *kobj_lookup(struct kobj_map *, dev_t, int *);
+struct kobj_map *kobj_map_init(kobj_probe_t *, struct mutex *);
+
+#endif /* _KOBJ_MAP_H_ */
diff --git a/include/linux/kobject.h b/include/linux/kobject.h
new file mode 100644
index 00000000..fc615a97
--- /dev/null
+++ b/include/linux/kobject.h
@@ -0,0 +1,234 @@
+/*
+ * kobject.h - generic kernel object infrastructure.
+ *
+ * Copyright (c) 2002-2003 Patrick Mochel
+ * Copyright (c) 2002-2003 Open Source Development Labs
+ * Copyright (c) 2006-2008 Greg Kroah-Hartman <greg@kroah.com>
+ * Copyright (c) 2006-2008 Novell Inc.
+ *
+ * This file is released under the GPLv2.
+ *
+ * Please read Documentation/kobject.txt before using the kobject
+ * interface, ESPECIALLY the parts about reference counts and object
+ * destructors.
+ */
+
+#ifndef _KOBJECT_H_
+#define _KOBJECT_H_
+
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/sysfs.h>
+#include <linux/compiler.h>
+#include <linux/spinlock.h>
+#include <linux/kref.h>
+#include <linux/kobject_ns.h>
+#include <linux/kernel.h>
+#include <linux/wait.h>
+#include <linux/atomic.h>
+
+#define UEVENT_HELPER_PATH_LEN		256
+#define UEVENT_NUM_ENVP			32	/* number of env pointers */
+#define UEVENT_BUFFER_SIZE		2048	/* buffer for the variables */
+
+/* path to the userspace helper executed on an event */
+extern char uevent_helper[];
+
+/* counter to tag the uevent, read only except for the kobject core */
+extern u64 uevent_seqnum;
+
+/*
+ * The actions here must match the index to the string array
+ * in lib/kobject_uevent.c
+ *
+ * Do not add new actions here without checking with the driver-core
+ * maintainers. Action strings are not meant to express subsystem
+ * or device specific properties. In most cases you want to send a
+ * kobject_uevent_env(kobj, KOBJ_CHANGE, env) with additional event
+ * specific variables added to the event environment.
+ */
+enum kobject_action {
+	KOBJ_ADD,
+	KOBJ_REMOVE,
+	KOBJ_CHANGE,
+	KOBJ_MOVE,
+	KOBJ_ONLINE,
+	KOBJ_OFFLINE,
+	KOBJ_MAX
+};
+
+struct kobject {
+	const char		*name;
+	struct list_head	entry;
+	struct kobject		*parent;
+	struct kset		*kset;
+	struct kobj_type	*ktype;
+	struct sysfs_dirent	*sd;
+	struct kref		kref;
+	unsigned int state_initialized:1;
+	unsigned int state_in_sysfs:1;
+	unsigned int state_add_uevent_sent:1;
+	unsigned int state_remove_uevent_sent:1;
+	unsigned int uevent_suppress:1;
+};
+
+extern __printf(2, 3)
+int kobject_set_name(struct kobject *kobj, const char *name, ...);
+extern int kobject_set_name_vargs(struct kobject *kobj, const char *fmt,
+				  va_list vargs);
+
+static inline const char *kobject_name(const struct kobject *kobj)
+{
+	return kobj->name;
+}
+
+extern void kobject_init(struct kobject *kobj, struct kobj_type *ktype);
+extern __printf(3, 4) __must_check
+int kobject_add(struct kobject *kobj, struct kobject *parent,
+		const char *fmt, ...);
+extern __printf(4, 5) __must_check
+int kobject_init_and_add(struct kobject *kobj,
+			 struct kobj_type *ktype, struct kobject *parent,
+			 const char *fmt, ...);
+
+extern void kobject_del(struct kobject *kobj);
+
+extern struct kobject * __must_check kobject_create(void);
+extern struct kobject * __must_check kobject_create_and_add(const char *name,
+						struct kobject *parent);
+
+extern int __must_check kobject_rename(struct kobject *, const char *new_name);
+extern int __must_check kobject_move(struct kobject *, struct kobject *);
+
+extern struct kobject *kobject_get(struct kobject *kobj);
+extern void kobject_put(struct kobject *kobj);
+
+extern char *kobject_get_path(struct kobject *kobj, gfp_t flag);
+
+struct kobj_type {
+	void (*release)(struct kobject *kobj);
+	const struct sysfs_ops *sysfs_ops;
+	struct attribute **default_attrs;
+	const struct kobj_ns_type_operations *(*child_ns_type)(struct kobject *kobj);
+	const void *(*namespace)(struct kobject *kobj);
+};
+
+struct kobj_uevent_env {
+	char *envp[UEVENT_NUM_ENVP];
+	int envp_idx;
+	char buf[UEVENT_BUFFER_SIZE];
+	int buflen;
+};
+
+struct kset_uevent_ops {
+	int (* const filter)(struct kset *kset, struct kobject *kobj);
+	const char *(* const name)(struct kset *kset, struct kobject *kobj);
+	int (* const uevent)(struct kset *kset, struct kobject *kobj,
+		      struct kobj_uevent_env *env);
+};
+
+struct kobj_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct kobject *kobj, struct kobj_attribute *attr,
+			char *buf);
+	ssize_t (*store)(struct kobject *kobj, struct kobj_attribute *attr,
+			 const char *buf, size_t count);
+};
+
+extern const struct sysfs_ops kobj_sysfs_ops;
+
+struct sock;
+
+/**
+ * struct kset - a set of kobjects of a specific type, belonging to a specific subsystem.
+ *
+ * A kset defines a group of kobjects.  They can be individually
+ * different "types" but overall these kobjects all want to be grouped
+ * together and operated on in the same manner.  ksets are used to
+ * define the attribute callbacks and other common events that happen to
+ * a kobject.
+ *
+ * @list: the list of all kobjects for this kset
+ * @list_lock: a lock for iterating over the kobjects
+ * @kobj: the embedded kobject for this kset (recursion, isn't it fun...)
+ * @uevent_ops: the set of uevent operations for this kset.  These are
+ * called whenever a kobject has something happen to it so that the kset
+ * can add new environment variables, or filter out the uevents if so
+ * desired.
+ */
+struct kset {
+	struct list_head list;
+	spinlock_t list_lock;
+	struct kobject kobj;
+	const struct kset_uevent_ops *uevent_ops;
+};
+
+extern void kset_init(struct kset *kset);
+extern int __must_check kset_register(struct kset *kset);
+extern void kset_unregister(struct kset *kset);
+extern struct kset * __must_check kset_create_and_add(const char *name,
+						const struct kset_uevent_ops *u,
+						struct kobject *parent_kobj);
+
+static inline struct kset *to_kset(struct kobject *kobj)
+{
+	return kobj ? container_of(kobj, struct kset, kobj) : NULL;
+}
+
+static inline struct kset *kset_get(struct kset *k)
+{
+	return k ? to_kset(kobject_get(&k->kobj)) : NULL;
+}
+
+static inline void kset_put(struct kset *k)
+{
+	kobject_put(&k->kobj);
+}
+
+static inline struct kobj_type *get_ktype(struct kobject *kobj)
+{
+	return kobj->ktype;
+}
+
+extern struct kobject *kset_find_obj(struct kset *, const char *);
+
+/* The global /sys/kernel/ kobject for people to chain off of */
+extern struct kobject *kernel_kobj;
+/* The global /sys/kernel/mm/ kobject for people to chain off of */
+extern struct kobject *mm_kobj;
+/* The global /sys/hypervisor/ kobject for people to chain off of */
+extern struct kobject *hypervisor_kobj;
+/* The global /sys/power/ kobject for people to chain off of */
+extern struct kobject *power_kobj;
+/* The global /sys/firmware/ kobject for people to chain off of */
+extern struct kobject *firmware_kobj;
+
+#if defined(CONFIG_HOTPLUG)
+int kobject_uevent(struct kobject *kobj, enum kobject_action action);
+int kobject_uevent_env(struct kobject *kobj, enum kobject_action action,
+			char *envp[]);
+
+__printf(2, 3)
+int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...);
+
+int kobject_action_type(const char *buf, size_t count,
+			enum kobject_action *type);
+#else
+static inline int kobject_uevent(struct kobject *kobj,
+				 enum kobject_action action)
+{ return 0; }
+static inline int kobject_uevent_env(struct kobject *kobj,
+				      enum kobject_action action,
+				      char *envp[])
+{ return 0; }
+
+static inline __printf(2, 3)
+int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...)
+{ return 0; }
+
+static inline int kobject_action_type(const char *buf, size_t count,
+				      enum kobject_action *type)
+{ return -EINVAL; }
+#endif
+
+#endif /* _KOBJECT_H_ */
diff --git a/include/linux/kobject_ns.h b/include/linux/kobject_ns.h
new file mode 100644
index 00000000..f66b065a
--- /dev/null
+++ b/include/linux/kobject_ns.h
@@ -0,0 +1,58 @@
+/* Kernel object name space definitions
+ *
+ * Copyright (c) 2002-2003 Patrick Mochel
+ * Copyright (c) 2002-2003 Open Source Development Labs
+ * Copyright (c) 2006-2008 Greg Kroah-Hartman <greg@kroah.com>
+ * Copyright (c) 2006-2008 Novell Inc.
+ *
+ * Split from kobject.h by David Howells (dhowells@redhat.com)
+ *
+ * This file is released under the GPLv2.
+ *
+ * Please read Documentation/kobject.txt before using the kobject
+ * interface, ESPECIALLY the parts about reference counts and object
+ * destructors.
+ */
+
+#ifndef _LINUX_KOBJECT_NS_H
+#define _LINUX_KOBJECT_NS_H
+
+struct sock;
+struct kobject;
+
+/*
+ * Namespace types which are used to tag kobjects and sysfs entries.
+ * Network namespace will likely be the first.
+ */
+enum kobj_ns_type {
+	KOBJ_NS_TYPE_NONE = 0,
+	KOBJ_NS_TYPE_NET,
+	KOBJ_NS_TYPES
+};
+
+/*
+ * Callbacks so sysfs can determine namespaces
+ *   @grab_current_ns: return a new reference to calling task's namespace
+ *   @netlink_ns: return namespace to which a sock belongs (right?)
+ *   @initial_ns: return the initial namespace (i.e. init_net_ns)
+ *   @drop_ns: drops a reference to namespace
+ */
+struct kobj_ns_type_operations {
+	enum kobj_ns_type type;
+	void *(*grab_current_ns)(void);
+	const void *(*netlink_ns)(struct sock *sk);
+	const void *(*initial_ns)(void);
+	void (*drop_ns)(void *);
+};
+
+int kobj_ns_type_register(const struct kobj_ns_type_operations *ops);
+int kobj_ns_type_registered(enum kobj_ns_type type);
+const struct kobj_ns_type_operations *kobj_child_ns_ops(struct kobject *parent);
+const struct kobj_ns_type_operations *kobj_ns_ops(struct kobject *kobj);
+
+void *kobj_ns_grab_current(enum kobj_ns_type type);
+const void *kobj_ns_netlink(enum kobj_ns_type type, struct sock *sk);
+const void *kobj_ns_initial(enum kobj_ns_type type);
+void kobj_ns_drop(enum kobj_ns_type type, void *ns);
+
+#endif /* _LINUX_KOBJECT_NS_H */
diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h
new file mode 100644
index 00000000..b6e1f8c0
--- /dev/null
+++ b/include/linux/kprobes.h
@@ -0,0 +1,440 @@
+#ifndef _LINUX_KPROBES_H
+#define _LINUX_KPROBES_H
+/*
+ *  Kernel Probes (KProbes)
+ *  include/linux/kprobes.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2002, 2004
+ *
+ * 2002-Oct	Created by Vamsi Krishna S <vamsi_krishna@in.ibm.com> Kernel
+ *		Probes initial implementation ( includes suggestions from
+ *		Rusty Russell).
+ * 2004-July	Suparna Bhattacharya <suparna@in.ibm.com> added jumper probes
+ *		interface to access function arguments.
+ * 2005-May	Hien Nguyen <hien@us.ibm.com> and Jim Keniston
+ *		<jkenisto@us.ibm.com>  and Prasanna S Panchamukhi
+ *		<prasanna@in.ibm.com> added function-return probes.
+ */
+#include <linux/linkage.h>
+#include <linux/list.h>
+#include <linux/notifier.h>
+#include <linux/smp.h>
+#include <linux/bug.h>
+#include <linux/percpu.h>
+#include <linux/spinlock.h>
+#include <linux/rcupdate.h>
+#include <linux/mutex.h>
+
+#ifdef CONFIG_KPROBES
+#include <asm/kprobes.h>
+
+/* kprobe_status settings */
+#define KPROBE_HIT_ACTIVE	0x00000001
+#define KPROBE_HIT_SS		0x00000002
+#define KPROBE_REENTER		0x00000004
+#define KPROBE_HIT_SSDONE	0x00000008
+
+/* Attach to insert probes on any functions which should be ignored*/
+#define __kprobes	__attribute__((__section__(".kprobes.text")))
+#else /* CONFIG_KPROBES */
+typedef int kprobe_opcode_t;
+struct arch_specific_insn {
+	int dummy;
+};
+#define __kprobes
+#endif /* CONFIG_KPROBES */
+
+struct kprobe;
+struct pt_regs;
+struct kretprobe;
+struct kretprobe_instance;
+typedef int (*kprobe_pre_handler_t) (struct kprobe *, struct pt_regs *);
+typedef int (*kprobe_break_handler_t) (struct kprobe *, struct pt_regs *);
+typedef void (*kprobe_post_handler_t) (struct kprobe *, struct pt_regs *,
+				       unsigned long flags);
+typedef int (*kprobe_fault_handler_t) (struct kprobe *, struct pt_regs *,
+				       int trapnr);
+typedef int (*kretprobe_handler_t) (struct kretprobe_instance *,
+				    struct pt_regs *);
+
+struct kprobe {
+	struct hlist_node hlist;
+
+	/* list of kprobes for multi-handler support */
+	struct list_head list;
+
+	/*count the number of times this probe was temporarily disarmed */
+	unsigned long nmissed;
+
+	/* location of the probe point */
+	kprobe_opcode_t *addr;
+
+	/* Allow user to indicate symbol name of the probe point */
+	const char *symbol_name;
+
+	/* Offset into the symbol */
+	unsigned int offset;
+
+	/* Called before addr is executed. */
+	kprobe_pre_handler_t pre_handler;
+
+	/* Called after addr is executed, unless... */
+	kprobe_post_handler_t post_handler;
+
+	/*
+	 * ... called if executing addr causes a fault (eg. page fault).
+	 * Return 1 if it handled fault, otherwise kernel will see it.
+	 */
+	kprobe_fault_handler_t fault_handler;
+
+	/*
+	 * ... called if breakpoint trap occurs in probe handler.
+	 * Return 1 if it handled break, otherwise kernel will see it.
+	 */
+	kprobe_break_handler_t break_handler;
+
+	/* Saved opcode (which has been replaced with breakpoint) */
+	kprobe_opcode_t opcode;
+
+	/* copy of the original instruction */
+	struct arch_specific_insn ainsn;
+
+	/*
+	 * Indicates various status flags.
+	 * Protected by kprobe_mutex after this kprobe is registered.
+	 */
+	u32 flags;
+};
+
+/* Kprobe status flags */
+#define KPROBE_FLAG_GONE	1 /* breakpoint has already gone */
+#define KPROBE_FLAG_DISABLED	2 /* probe is temporarily disabled */
+#define KPROBE_FLAG_OPTIMIZED	4 /*
+				   * probe is really optimized.
+				   * NOTE:
+				   * this flag is only for optimized_kprobe.
+				   */
+
+/* Has this kprobe gone ? */
+static inline int kprobe_gone(struct kprobe *p)
+{
+	return p->flags & KPROBE_FLAG_GONE;
+}
+
+/* Is this kprobe disabled ? */
+static inline int kprobe_disabled(struct kprobe *p)
+{
+	return p->flags & (KPROBE_FLAG_DISABLED | KPROBE_FLAG_GONE);
+}
+
+/* Is this kprobe really running optimized path ? */
+static inline int kprobe_optimized(struct kprobe *p)
+{
+	return p->flags & KPROBE_FLAG_OPTIMIZED;
+}
+/*
+ * Special probe type that uses setjmp-longjmp type tricks to resume
+ * execution at a specified entry with a matching prototype corresponding
+ * to the probed function - a trick to enable arguments to become
+ * accessible seamlessly by probe handling logic.
+ * Note:
+ * Because of the way compilers allocate stack space for local variables
+ * etc upfront, regardless of sub-scopes within a function, this mirroring
+ * principle currently works only for probes placed on function entry points.
+ */
+struct jprobe {
+	struct kprobe kp;
+	void *entry;	/* probe handling code to jump to */
+};
+
+/* For backward compatibility with old code using JPROBE_ENTRY() */
+#define JPROBE_ENTRY(handler)	(handler)
+
+/*
+ * Function-return probe -
+ * Note:
+ * User needs to provide a handler function, and initialize maxactive.
+ * maxactive - The maximum number of instances of the probed function that
+ * can be active concurrently.
+ * nmissed - tracks the number of times the probed function's return was
+ * ignored, due to maxactive being too low.
+ *
+ */
+struct kretprobe {
+	struct kprobe kp;
+	kretprobe_handler_t handler;
+	kretprobe_handler_t entry_handler;
+	int maxactive;
+	int nmissed;
+	size_t data_size;
+	struct hlist_head free_instances;
+	raw_spinlock_t lock;
+};
+
+struct kretprobe_instance {
+	struct hlist_node hlist;
+	struct kretprobe *rp;
+	kprobe_opcode_t *ret_addr;
+	struct task_struct *task;
+	char data[0];
+};
+
+struct kretprobe_blackpoint {
+	const char *name;
+	void *addr;
+};
+
+struct kprobe_blackpoint {
+	const char *name;
+	unsigned long start_addr;
+	unsigned long range;
+};
+
+#ifdef CONFIG_KPROBES
+DECLARE_PER_CPU(struct kprobe *, current_kprobe);
+DECLARE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
+
+/*
+ * For #ifdef avoidance:
+ */
+static inline int kprobes_built_in(void)
+{
+	return 1;
+}
+
+#ifdef CONFIG_KRETPROBES
+extern void arch_prepare_kretprobe(struct kretprobe_instance *ri,
+				   struct pt_regs *regs);
+extern int arch_trampoline_kprobe(struct kprobe *p);
+#else /* CONFIG_KRETPROBES */
+static inline void arch_prepare_kretprobe(struct kretprobe *rp,
+					struct pt_regs *regs)
+{
+}
+static inline int arch_trampoline_kprobe(struct kprobe *p)
+{
+	return 0;
+}
+#endif /* CONFIG_KRETPROBES */
+
+extern struct kretprobe_blackpoint kretprobe_blacklist[];
+
+static inline void kretprobe_assert(struct kretprobe_instance *ri,
+	unsigned long orig_ret_address, unsigned long trampoline_address)
+{
+	if (!orig_ret_address || (orig_ret_address == trampoline_address)) {
+		printk("kretprobe BUG!: Processing kretprobe %p @ %p\n",
+				ri->rp, ri->rp->kp.addr);
+		BUG();
+	}
+}
+
+#ifdef CONFIG_KPROBES_SANITY_TEST
+extern int init_test_probes(void);
+#else
+static inline int init_test_probes(void)
+{
+	return 0;
+}
+#endif /* CONFIG_KPROBES_SANITY_TEST */
+
+extern int arch_prepare_kprobe(struct kprobe *p);
+extern void arch_arm_kprobe(struct kprobe *p);
+extern void arch_disarm_kprobe(struct kprobe *p);
+extern int arch_init_kprobes(void);
+extern void show_registers(struct pt_regs *regs);
+extern kprobe_opcode_t *get_insn_slot(void);
+extern void free_insn_slot(kprobe_opcode_t *slot, int dirty);
+extern void kprobes_inc_nmissed_count(struct kprobe *p);
+
+#ifdef CONFIG_OPTPROBES
+/*
+ * Internal structure for direct jump optimized probe
+ */
+struct optimized_kprobe {
+	struct kprobe kp;
+	struct list_head list;	/* list for optimizing queue */
+	struct arch_optimized_insn optinsn;
+};
+
+/* Architecture dependent functions for direct jump optimization */
+extern int arch_prepared_optinsn(struct arch_optimized_insn *optinsn);
+extern int arch_check_optimized_kprobe(struct optimized_kprobe *op);
+extern int arch_prepare_optimized_kprobe(struct optimized_kprobe *op);
+extern void arch_remove_optimized_kprobe(struct optimized_kprobe *op);
+extern void arch_optimize_kprobes(struct list_head *oplist);
+extern void arch_unoptimize_kprobes(struct list_head *oplist,
+				    struct list_head *done_list);
+extern void arch_unoptimize_kprobe(struct optimized_kprobe *op);
+extern kprobe_opcode_t *get_optinsn_slot(void);
+extern void free_optinsn_slot(kprobe_opcode_t *slot, int dirty);
+extern int arch_within_optimized_kprobe(struct optimized_kprobe *op,
+					unsigned long addr);
+
+extern void opt_pre_handler(struct kprobe *p, struct pt_regs *regs);
+
+#ifdef CONFIG_SYSCTL
+extern int sysctl_kprobes_optimization;
+extern int proc_kprobes_optimization_handler(struct ctl_table *table,
+					     int write, void __user *buffer,
+					     size_t *length, loff_t *ppos);
+#endif
+
+#endif /* CONFIG_OPTPROBES */
+
+/* Get the kprobe at this addr (if any) - called with preemption disabled */
+struct kprobe *get_kprobe(void *addr);
+void kretprobe_hash_lock(struct task_struct *tsk,
+			 struct hlist_head **head, unsigned long *flags);
+void kretprobe_hash_unlock(struct task_struct *tsk, unsigned long *flags);
+struct hlist_head * kretprobe_inst_table_head(struct task_struct *tsk);
+
+/* kprobe_running() will just return the current_kprobe on this CPU */
+static inline struct kprobe *kprobe_running(void)
+{
+	return (__this_cpu_read(current_kprobe));
+}
+
+static inline void reset_current_kprobe(void)
+{
+	__this_cpu_write(current_kprobe, NULL);
+}
+
+static inline struct kprobe_ctlblk *get_kprobe_ctlblk(void)
+{
+	return (&__get_cpu_var(kprobe_ctlblk));
+}
+
+int register_kprobe(struct kprobe *p);
+void unregister_kprobe(struct kprobe *p);
+int register_kprobes(struct kprobe **kps, int num);
+void unregister_kprobes(struct kprobe **kps, int num);
+int setjmp_pre_handler(struct kprobe *, struct pt_regs *);
+int longjmp_break_handler(struct kprobe *, struct pt_regs *);
+int register_jprobe(struct jprobe *p);
+void unregister_jprobe(struct jprobe *p);
+int register_jprobes(struct jprobe **jps, int num);
+void unregister_jprobes(struct jprobe **jps, int num);
+void jprobe_return(void);
+unsigned long arch_deref_entry_point(void *);
+
+int register_kretprobe(struct kretprobe *rp);
+void unregister_kretprobe(struct kretprobe *rp);
+int register_kretprobes(struct kretprobe **rps, int num);
+void unregister_kretprobes(struct kretprobe **rps, int num);
+
+void kprobe_flush_task(struct task_struct *tk);
+void recycle_rp_inst(struct kretprobe_instance *ri, struct hlist_head *head);
+
+int disable_kprobe(struct kprobe *kp);
+int enable_kprobe(struct kprobe *kp);
+
+void dump_kprobe(struct kprobe *kp);
+
+#else /* !CONFIG_KPROBES: */
+
+static inline int kprobes_built_in(void)
+{
+	return 0;
+}
+static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+{
+	return 0;
+}
+static inline struct kprobe *get_kprobe(void *addr)
+{
+	return NULL;
+}
+static inline struct kprobe *kprobe_running(void)
+{
+	return NULL;
+}
+static inline int register_kprobe(struct kprobe *p)
+{
+	return -ENOSYS;
+}
+static inline int register_kprobes(struct kprobe **kps, int num)
+{
+	return -ENOSYS;
+}
+static inline void unregister_kprobe(struct kprobe *p)
+{
+}
+static inline void unregister_kprobes(struct kprobe **kps, int num)
+{
+}
+static inline int register_jprobe(struct jprobe *p)
+{
+	return -ENOSYS;
+}
+static inline int register_jprobes(struct jprobe **jps, int num)
+{
+	return -ENOSYS;
+}
+static inline void unregister_jprobe(struct jprobe *p)
+{
+}
+static inline void unregister_jprobes(struct jprobe **jps, int num)
+{
+}
+static inline void jprobe_return(void)
+{
+}
+static inline int register_kretprobe(struct kretprobe *rp)
+{
+	return -ENOSYS;
+}
+static inline int register_kretprobes(struct kretprobe **rps, int num)
+{
+	return -ENOSYS;
+}
+static inline void unregister_kretprobe(struct kretprobe *rp)
+{
+}
+static inline void unregister_kretprobes(struct kretprobe **rps, int num)
+{
+}
+static inline void kprobe_flush_task(struct task_struct *tk)
+{
+}
+static inline int disable_kprobe(struct kprobe *kp)
+{
+	return -ENOSYS;
+}
+static inline int enable_kprobe(struct kprobe *kp)
+{
+	return -ENOSYS;
+}
+#endif /* CONFIG_KPROBES */
+static inline int disable_kretprobe(struct kretprobe *rp)
+{
+	return disable_kprobe(&rp->kp);
+}
+static inline int enable_kretprobe(struct kretprobe *rp)
+{
+	return enable_kprobe(&rp->kp);
+}
+static inline int disable_jprobe(struct jprobe *jp)
+{
+	return disable_kprobe(&jp->kp);
+}
+static inline int enable_jprobe(struct jprobe *jp)
+{
+	return enable_kprobe(&jp->kp);
+}
+
+#endif /* _LINUX_KPROBES_H */
diff --git a/include/linux/kref.h b/include/linux/kref.h
new file mode 100644
index 00000000..9c07dceb
--- /dev/null
+++ b/include/linux/kref.h
@@ -0,0 +1,96 @@
+/*
+ * kref.h - library routines for handling generic reference counted objects
+ *
+ * Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com>
+ * Copyright (C) 2004 IBM Corp.
+ *
+ * based on kobject.h which was:
+ * Copyright (C) 2002-2003 Patrick Mochel <mochel@osdl.org>
+ * Copyright (C) 2002-2003 Open Source Development Labs
+ *
+ * This file is released under the GPLv2.
+ *
+ */
+
+#ifndef _KREF_H_
+#define _KREF_H_
+
+#include <linux/bug.h>
+#include <linux/atomic.h>
+#include <linux/kernel.h>
+
+struct kref {
+	atomic_t refcount;
+};
+
+/**
+ * kref_init - initialize object.
+ * @kref: object in question.
+ */
+static inline void kref_init(struct kref *kref)
+{
+	atomic_set(&kref->refcount, 1);
+}
+
+/**
+ * kref_get - increment refcount for object.
+ * @kref: object.
+ */
+static inline void kref_get(struct kref *kref)
+{
+	WARN_ON(!atomic_read(&kref->refcount));
+	atomic_inc(&kref->refcount);
+}
+
+/**
+ * kref_sub - subtract a number of refcounts for object.
+ * @kref: object.
+ * @count: Number of recounts to subtract.
+ * @release: pointer to the function that will clean up the object when the
+ *	     last reference to the object is released.
+ *	     This pointer is required, and it is not acceptable to pass kfree
+ *	     in as this function.  If the caller does pass kfree to this
+ *	     function, you will be publicly mocked mercilessly by the kref
+ *	     maintainer, and anyone else who happens to notice it.  You have
+ *	     been warned.
+ *
+ * Subtract @count from the refcount, and if 0, call release().
+ * Return 1 if the object was removed, otherwise return 0.  Beware, if this
+ * function returns 0, you still can not count on the kref from remaining in
+ * memory.  Only use the return value if you want to see if the kref is now
+ * gone, not present.
+ */
+static inline int kref_sub(struct kref *kref, unsigned int count,
+	     void (*release)(struct kref *kref))
+{
+	WARN_ON(release == NULL);
+
+	if (atomic_sub_and_test((int) count, &kref->refcount)) {
+		release(kref);
+		return 1;
+	}
+	return 0;
+}
+
+/**
+ * kref_put - decrement refcount for object.
+ * @kref: object.
+ * @release: pointer to the function that will clean up the object when the
+ *	     last reference to the object is released.
+ *	     This pointer is required, and it is not acceptable to pass kfree
+ *	     in as this function.  If the caller does pass kfree to this
+ *	     function, you will be publicly mocked mercilessly by the kref
+ *	     maintainer, and anyone else who happens to notice it.  You have
+ *	     been warned.
+ *
+ * Decrement the refcount, and if 0, call release().
+ * Return 1 if the object was removed, otherwise return 0.  Beware, if this
+ * function returns 0, you still can not count on the kref from remaining in
+ * memory.  Only use the return value if you want to see if the kref is now
+ * gone, not present.
+ */
+static inline int kref_put(struct kref *kref, void (*release)(struct kref *kref))
+{
+	return kref_sub(kref, 1, release);
+}
+#endif /* _KREF_H_ */
diff --git a/include/linux/ks0108.h b/include/linux/ks0108.h
new file mode 100644
index 00000000..cb311798
--- /dev/null
+++ b/include/linux/ks0108.h
@@ -0,0 +1,49 @@
+/*
+ *    Filename: ks0108.h
+ *     Version: 0.1.0
+ * Description: ks0108 LCD Controller driver header
+ *     License: GPLv2
+ *
+ *      Author: Copyright (C) Miguel Ojeda Sandonis
+ *        Date: 2006-10-31
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef _KS0108_H_
+#define _KS0108_H_
+
+/* Write a byte to the data port */
+extern void ks0108_writedata(unsigned char byte);
+
+/* Write a byte to the control port */
+extern void ks0108_writecontrol(unsigned char byte);
+
+/* Set the controller's current display state (0..1) */
+extern void ks0108_displaystate(unsigned char state);
+
+/* Set the controller's current startline (0..63) */
+extern void ks0108_startline(unsigned char startline);
+
+/* Set the controller's current address (0..63) */
+extern void ks0108_address(unsigned char address);
+
+/* Set the controller's current page (0..7) */
+extern void ks0108_page(unsigned char page);
+
+/* Is the module inited? */
+extern unsigned char ks0108_isinited(void);
+
+#endif /* _KS0108_H_ */
diff --git a/include/linux/ks8842.h b/include/linux/ks8842.h
new file mode 100644
index 00000000..14ba4452
--- /dev/null
+++ b/include/linux/ks8842.h
@@ -0,0 +1,38 @@
+/*
+ * ks8842.h KS8842 platform data struct definition
+ * Copyright (c) 2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _LINUX_KS8842_H
+#define _LINUX_KS8842_H
+
+#include <linux/if_ether.h>
+
+/**
+ * struct ks8842_platform_data - Platform data of the KS8842 network driver
+ * @macaddr:	The MAC address of the device, set to all 0:s to use the on in
+ *		the chip.
+ * @rx_dma_channel:	The DMA channel to use for RX, -1 for none.
+ * @tx_dma_channel:	The DMA channel to use for TX, -1 for none.
+ *
+ */
+struct ks8842_platform_data {
+	u8 macaddr[ETH_ALEN];
+	int rx_dma_channel;
+	int tx_dma_channel;
+};
+
+#endif
diff --git a/include/linux/ksm.h b/include/linux/ksm.h
new file mode 100644
index 00000000..3319a696
--- /dev/null
+++ b/include/linux/ksm.h
@@ -0,0 +1,145 @@
+#ifndef __LINUX_KSM_H
+#define __LINUX_KSM_H
+/*
+ * Memory merging support.
+ *
+ * This code enables dynamic sharing of identical pages found in different
+ * memory areas, even if they are not shared by fork().
+ */
+
+#include <linux/bitops.h>
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+#include <linux/rmap.h>
+#include <linux/sched.h>
+
+struct stable_node;
+struct mem_cgroup;
+
+struct page *ksm_does_need_to_copy(struct page *page,
+			struct vm_area_struct *vma, unsigned long address);
+
+#ifdef CONFIG_KSM
+int ksm_madvise(struct vm_area_struct *vma, unsigned long start,
+		unsigned long end, int advice, unsigned long *vm_flags);
+int __ksm_enter(struct mm_struct *mm);
+void __ksm_exit(struct mm_struct *mm);
+
+static inline int ksm_fork(struct mm_struct *mm, struct mm_struct *oldmm)
+{
+	if (test_bit(MMF_VM_MERGEABLE, &oldmm->flags))
+		return __ksm_enter(mm);
+	return 0;
+}
+
+static inline void ksm_exit(struct mm_struct *mm)
+{
+	if (test_bit(MMF_VM_MERGEABLE, &mm->flags))
+		__ksm_exit(mm);
+}
+
+/*
+ * A KSM page is one of those write-protected "shared pages" or "merged pages"
+ * which KSM maps into multiple mms, wherever identical anonymous page content
+ * is found in VM_MERGEABLE vmas.  It's a PageAnon page, pointing not to any
+ * anon_vma, but to that page's node of the stable tree.
+ */
+static inline int PageKsm(struct page *page)
+{
+	return ((unsigned long)page->mapping & PAGE_MAPPING_FLAGS) ==
+				(PAGE_MAPPING_ANON | PAGE_MAPPING_KSM);
+}
+
+static inline struct stable_node *page_stable_node(struct page *page)
+{
+	return PageKsm(page) ? page_rmapping(page) : NULL;
+}
+
+static inline void set_page_stable_node(struct page *page,
+					struct stable_node *stable_node)
+{
+	page->mapping = (void *)stable_node +
+				(PAGE_MAPPING_ANON | PAGE_MAPPING_KSM);
+}
+
+/*
+ * When do_swap_page() first faults in from swap what used to be a KSM page,
+ * no problem, it will be assigned to this vma's anon_vma; but thereafter,
+ * it might be faulted into a different anon_vma (or perhaps to a different
+ * offset in the same anon_vma).  do_swap_page() cannot do all the locking
+ * needed to reconstitute a cross-anon_vma KSM page: for now it has to make
+ * a copy, and leave remerging the pages to a later pass of ksmd.
+ *
+ * We'd like to make this conditional on vma->vm_flags & VM_MERGEABLE,
+ * but what if the vma was unmerged while the page was swapped out?
+ */
+static inline int ksm_might_need_to_copy(struct page *page,
+			struct vm_area_struct *vma, unsigned long address)
+{
+	struct anon_vma *anon_vma = page_anon_vma(page);
+
+	return anon_vma &&
+		(anon_vma->root != vma->anon_vma->root ||
+		 page->index != linear_page_index(vma, address));
+}
+
+int page_referenced_ksm(struct page *page,
+			struct mem_cgroup *memcg, unsigned long *vm_flags);
+int try_to_unmap_ksm(struct page *page, enum ttu_flags flags);
+int rmap_walk_ksm(struct page *page, int (*rmap_one)(struct page *,
+		  struct vm_area_struct *, unsigned long, void *), void *arg);
+void ksm_migrate_page(struct page *newpage, struct page *oldpage);
+
+#else  /* !CONFIG_KSM */
+
+static inline int ksm_fork(struct mm_struct *mm, struct mm_struct *oldmm)
+{
+	return 0;
+}
+
+static inline void ksm_exit(struct mm_struct *mm)
+{
+}
+
+static inline int PageKsm(struct page *page)
+{
+	return 0;
+}
+
+#ifdef CONFIG_MMU
+static inline int ksm_madvise(struct vm_area_struct *vma, unsigned long start,
+		unsigned long end, int advice, unsigned long *vm_flags)
+{
+	return 0;
+}
+
+static inline int ksm_might_need_to_copy(struct page *page,
+			struct vm_area_struct *vma, unsigned long address)
+{
+	return 0;
+}
+
+static inline int page_referenced_ksm(struct page *page,
+			struct mem_cgroup *memcg, unsigned long *vm_flags)
+{
+	return 0;
+}
+
+static inline int try_to_unmap_ksm(struct page *page, enum ttu_flags flags)
+{
+	return 0;
+}
+
+static inline int rmap_walk_ksm(struct page *page, int (*rmap_one)(struct page*,
+		struct vm_area_struct *, unsigned long, void *), void *arg)
+{
+	return 0;
+}
+
+static inline void ksm_migrate_page(struct page *newpage, struct page *oldpage)
+{
+}
+#endif /* CONFIG_MMU */
+#endif /* !CONFIG_KSM */
+
+#endif /* __LINUX_KSM_H */
diff --git a/include/linux/kthread.h b/include/linux/kthread.h
new file mode 100644
index 00000000..22ccf9de
--- /dev/null
+++ b/include/linux/kthread.h
@@ -0,0 +1,130 @@
+#ifndef _LINUX_KTHREAD_H
+#define _LINUX_KTHREAD_H
+/* Simple interface for creating and stopping kernel threads without mess. */
+#include <linux/err.h>
+#include <linux/sched.h>
+
+__printf(4, 5)
+struct task_struct *kthread_create_on_node(int (*threadfn)(void *data),
+					   void *data,
+					   int node,
+					   const char namefmt[], ...);
+
+#define kthread_create(threadfn, data, namefmt, arg...) \
+	kthread_create_on_node(threadfn, data, -1, namefmt, ##arg)
+
+
+/**
+ * kthread_run - create and wake a thread.
+ * @threadfn: the function to run until signal_pending(current).
+ * @data: data ptr for @threadfn.
+ * @namefmt: printf-style name for the thread.
+ *
+ * Description: Convenient wrapper for kthread_create() followed by
+ * wake_up_process().  Returns the kthread or ERR_PTR(-ENOMEM).
+ */
+#define kthread_run(threadfn, data, namefmt, ...)			   \
+({									   \
+	struct task_struct *__k						   \
+		= kthread_create(threadfn, data, namefmt, ## __VA_ARGS__); \
+	if (!IS_ERR(__k))						   \
+		wake_up_process(__k);					   \
+	__k;								   \
+})
+
+void kthread_bind(struct task_struct *k, unsigned int cpu);
+int kthread_stop(struct task_struct *k);
+int kthread_should_stop(void);
+bool kthread_freezable_should_stop(bool *was_frozen);
+void *kthread_data(struct task_struct *k);
+
+int kthreadd(void *unused);
+extern struct task_struct *kthreadd_task;
+extern int tsk_fork_get_node(struct task_struct *tsk);
+
+/*
+ * Simple work processor based on kthread.
+ *
+ * This provides easier way to make use of kthreads.  A kthread_work
+ * can be queued and flushed using queue/flush_kthread_work()
+ * respectively.  Queued kthread_works are processed by a kthread
+ * running kthread_worker_fn().
+ */
+struct kthread_work;
+typedef void (*kthread_work_func_t)(struct kthread_work *work);
+
+struct kthread_worker {
+	spinlock_t		lock;
+	struct list_head	work_list;
+	struct task_struct	*task;
+	struct kthread_work	*current_work;
+};
+
+struct kthread_work {
+	struct list_head	node;
+	kthread_work_func_t	func;
+	wait_queue_head_t	done;
+	struct kthread_worker	*worker;
+};
+
+#define KTHREAD_WORKER_INIT(worker)	{				\
+	.lock = __SPIN_LOCK_UNLOCKED((worker).lock),			\
+	.work_list = LIST_HEAD_INIT((worker).work_list),		\
+	}
+
+#define KTHREAD_WORK_INIT(work, fn)	{				\
+	.node = LIST_HEAD_INIT((work).node),				\
+	.func = (fn),							\
+	.done = __WAIT_QUEUE_HEAD_INITIALIZER((work).done),		\
+	}
+
+#define DEFINE_KTHREAD_WORKER(worker)					\
+	struct kthread_worker worker = KTHREAD_WORKER_INIT(worker)
+
+#define DEFINE_KTHREAD_WORK(work, fn)					\
+	struct kthread_work work = KTHREAD_WORK_INIT(work, fn)
+
+/*
+ * kthread_worker.lock and kthread_work.done need their own lockdep class
+ * keys if they are defined on stack with lockdep enabled.  Use the
+ * following macros when defining them on stack.
+ */
+#ifdef CONFIG_LOCKDEP
+# define KTHREAD_WORKER_INIT_ONSTACK(worker)				\
+	({ init_kthread_worker(&worker); worker; })
+# define DEFINE_KTHREAD_WORKER_ONSTACK(worker)				\
+	struct kthread_worker worker = KTHREAD_WORKER_INIT_ONSTACK(worker)
+# define KTHREAD_WORK_INIT_ONSTACK(work, fn)				\
+	({ init_kthread_work((&work), fn); work; })
+# define DEFINE_KTHREAD_WORK_ONSTACK(work, fn)				\
+	struct kthread_work work = KTHREAD_WORK_INIT_ONSTACK(work, fn)
+#else
+# define DEFINE_KTHREAD_WORKER_ONSTACK(worker) DEFINE_KTHREAD_WORKER(worker)
+# define DEFINE_KTHREAD_WORK_ONSTACK(work, fn) DEFINE_KTHREAD_WORK(work, fn)
+#endif
+
+extern void __init_kthread_worker(struct kthread_worker *worker,
+			const char *name, struct lock_class_key *key);
+
+#define init_kthread_worker(worker)					\
+	do {								\
+		static struct lock_class_key __key;			\
+		__init_kthread_worker((worker), "("#worker")->lock", &__key); \
+	} while (0)
+
+#define init_kthread_work(work, fn)					\
+	do {								\
+		memset((work), 0, sizeof(struct kthread_work));		\
+		INIT_LIST_HEAD(&(work)->node);				\
+		(work)->func = (fn);					\
+		init_waitqueue_head(&(work)->done);			\
+	} while (0)
+
+int kthread_worker_fn(void *worker_ptr);
+
+bool queue_kthread_work(struct kthread_worker *worker,
+			struct kthread_work *work);
+void flush_kthread_work(struct kthread_work *work);
+void flush_kthread_worker(struct kthread_worker *worker);
+
+#endif /* _LINUX_KTHREAD_H */
diff --git a/include/linux/ktime.h b/include/linux/ktime.h
new file mode 100644
index 00000000..603bec29
--- /dev/null
+++ b/include/linux/ktime.h
@@ -0,0 +1,342 @@
+/*
+ *  include/linux/ktime.h
+ *
+ *  ktime_t - nanosecond-resolution time format.
+ *
+ *   Copyright(C) 2005, Thomas Gleixner <tglx@linutronix.de>
+ *   Copyright(C) 2005, Red Hat, Inc., Ingo Molnar
+ *
+ *  data type definitions, declarations, prototypes and macros.
+ *
+ *  Started by: Thomas Gleixner and Ingo Molnar
+ *
+ *  Credits:
+ *
+ *  	Roman Zippel provided the ideas and primary code snippets of
+ *  	the ktime_t union and further simplifications of the original
+ *  	code.
+ *
+ *  For licencing details see kernel-base/COPYING
+ */
+#ifndef _LINUX_KTIME_H
+#define _LINUX_KTIME_H
+
+#include <linux/time.h>
+#include <linux/jiffies.h>
+
+/*
+ * ktime_t:
+ *
+ * On 64-bit CPUs a single 64-bit variable is used to store the hrtimers
+ * internal representation of time values in scalar nanoseconds. The
+ * design plays out best on 64-bit CPUs, where most conversions are
+ * NOPs and most arithmetic ktime_t operations are plain arithmetic
+ * operations.
+ *
+ * On 32-bit CPUs an optimized representation of the timespec structure
+ * is used to avoid expensive conversions from and to timespecs. The
+ * endian-aware order of the tv struct members is chosen to allow
+ * mathematical operations on the tv64 member of the union too, which
+ * for certain operations produces better code.
+ *
+ * For architectures with efficient support for 64/32-bit conversions the
+ * plain scalar nanosecond based representation can be selected by the
+ * config switch CONFIG_KTIME_SCALAR.
+ */
+union ktime {
+	s64	tv64;
+#if BITS_PER_LONG != 64 && !defined(CONFIG_KTIME_SCALAR)
+	struct {
+# ifdef __BIG_ENDIAN
+	s32	sec, nsec;
+# else
+	s32	nsec, sec;
+# endif
+	} tv;
+#endif
+};
+
+typedef union ktime ktime_t;		/* Kill this */
+
+#define KTIME_MAX			((s64)~((u64)1 << 63))
+#if (BITS_PER_LONG == 64)
+# define KTIME_SEC_MAX			(KTIME_MAX / NSEC_PER_SEC)
+#else
+# define KTIME_SEC_MAX			LONG_MAX
+#endif
+
+/*
+ * ktime_t definitions when using the 64-bit scalar representation:
+ */
+
+#if (BITS_PER_LONG == 64) || defined(CONFIG_KTIME_SCALAR)
+
+/**
+ * ktime_set - Set a ktime_t variable from a seconds/nanoseconds value
+ * @secs:	seconds to set
+ * @nsecs:	nanoseconds to set
+ *
+ * Return the ktime_t representation of the value
+ */
+static inline ktime_t ktime_set(const long secs, const unsigned long nsecs)
+{
+#if (BITS_PER_LONG == 64)
+	if (unlikely(secs >= KTIME_SEC_MAX))
+		return (ktime_t){ .tv64 = KTIME_MAX };
+#endif
+	return (ktime_t) { .tv64 = (s64)secs * NSEC_PER_SEC + (s64)nsecs };
+}
+
+/* Subtract two ktime_t variables. rem = lhs -rhs: */
+#define ktime_sub(lhs, rhs) \
+		({ (ktime_t){ .tv64 = (lhs).tv64 - (rhs).tv64 }; })
+
+/* Add two ktime_t variables. res = lhs + rhs: */
+#define ktime_add(lhs, rhs) \
+		({ (ktime_t){ .tv64 = (lhs).tv64 + (rhs).tv64 }; })
+
+/*
+ * Add a ktime_t variable and a scalar nanosecond value.
+ * res = kt + nsval:
+ */
+#define ktime_add_ns(kt, nsval) \
+		({ (ktime_t){ .tv64 = (kt).tv64 + (nsval) }; })
+
+/*
+ * Subtract a scalar nanosecod from a ktime_t variable
+ * res = kt - nsval:
+ */
+#define ktime_sub_ns(kt, nsval) \
+		({ (ktime_t){ .tv64 = (kt).tv64 - (nsval) }; })
+
+/* convert a timespec to ktime_t format: */
+static inline ktime_t timespec_to_ktime(struct timespec ts)
+{
+	return ktime_set(ts.tv_sec, ts.tv_nsec);
+}
+
+/* convert a timeval to ktime_t format: */
+static inline ktime_t timeval_to_ktime(struct timeval tv)
+{
+	return ktime_set(tv.tv_sec, tv.tv_usec * NSEC_PER_USEC);
+}
+
+/* Map the ktime_t to timespec conversion to ns_to_timespec function */
+#define ktime_to_timespec(kt)		ns_to_timespec((kt).tv64)
+
+/* Map the ktime_t to timeval conversion to ns_to_timeval function */
+#define ktime_to_timeval(kt)		ns_to_timeval((kt).tv64)
+
+/* Convert ktime_t to nanoseconds - NOP in the scalar storage format: */
+#define ktime_to_ns(kt)			((kt).tv64)
+
+#else	/* !((BITS_PER_LONG == 64) || defined(CONFIG_KTIME_SCALAR)) */
+
+/*
+ * Helper macros/inlines to get the ktime_t math right in the timespec
+ * representation. The macros are sometimes ugly - their actual use is
+ * pretty okay-ish, given the circumstances. We do all this for
+ * performance reasons. The pure scalar nsec_t based code was nice and
+ * simple, but created too many 64-bit / 32-bit conversions and divisions.
+ *
+ * Be especially aware that negative values are represented in a way
+ * that the tv.sec field is negative and the tv.nsec field is greater
+ * or equal to zero but less than nanoseconds per second. This is the
+ * same representation which is used by timespecs.
+ *
+ *   tv.sec < 0 and 0 >= tv.nsec < NSEC_PER_SEC
+ */
+
+/* Set a ktime_t variable to a value in sec/nsec representation: */
+static inline ktime_t ktime_set(const long secs, const unsigned long nsecs)
+{
+	return (ktime_t) { .tv = { .sec = secs, .nsec = nsecs } };
+}
+
+/**
+ * ktime_sub - subtract two ktime_t variables
+ * @lhs:	minuend
+ * @rhs:	subtrahend
+ *
+ * Returns the remainder of the subtraction
+ */
+static inline ktime_t ktime_sub(const ktime_t lhs, const ktime_t rhs)
+{
+	ktime_t res;
+
+	res.tv64 = lhs.tv64 - rhs.tv64;
+	if (res.tv.nsec < 0)
+		res.tv.nsec += NSEC_PER_SEC;
+
+	return res;
+}
+
+/**
+ * ktime_add - add two ktime_t variables
+ * @add1:	addend1
+ * @add2:	addend2
+ *
+ * Returns the sum of @add1 and @add2.
+ */
+static inline ktime_t ktime_add(const ktime_t add1, const ktime_t add2)
+{
+	ktime_t res;
+
+	res.tv64 = add1.tv64 + add2.tv64;
+	/*
+	 * performance trick: the (u32) -NSEC gives 0x00000000Fxxxxxxx
+	 * so we subtract NSEC_PER_SEC and add 1 to the upper 32 bit.
+	 *
+	 * it's equivalent to:
+	 *   tv.nsec -= NSEC_PER_SEC
+	 *   tv.sec ++;
+	 */
+	if (res.tv.nsec >= NSEC_PER_SEC)
+		res.tv64 += (u32)-NSEC_PER_SEC;
+
+	return res;
+}
+
+/**
+ * ktime_add_ns - Add a scalar nanoseconds value to a ktime_t variable
+ * @kt:		addend
+ * @nsec:	the scalar nsec value to add
+ *
+ * Returns the sum of @kt and @nsec in ktime_t format
+ */
+extern ktime_t ktime_add_ns(const ktime_t kt, u64 nsec);
+
+/**
+ * ktime_sub_ns - Subtract a scalar nanoseconds value from a ktime_t variable
+ * @kt:		minuend
+ * @nsec:	the scalar nsec value to subtract
+ *
+ * Returns the subtraction of @nsec from @kt in ktime_t format
+ */
+extern ktime_t ktime_sub_ns(const ktime_t kt, u64 nsec);
+
+/**
+ * timespec_to_ktime - convert a timespec to ktime_t format
+ * @ts:		the timespec variable to convert
+ *
+ * Returns a ktime_t variable with the converted timespec value
+ */
+static inline ktime_t timespec_to_ktime(const struct timespec ts)
+{
+	return (ktime_t) { .tv = { .sec = (s32)ts.tv_sec,
+			   	   .nsec = (s32)ts.tv_nsec } };
+}
+
+/**
+ * timeval_to_ktime - convert a timeval to ktime_t format
+ * @tv:		the timeval variable to convert
+ *
+ * Returns a ktime_t variable with the converted timeval value
+ */
+static inline ktime_t timeval_to_ktime(const struct timeval tv)
+{
+	return (ktime_t) { .tv = { .sec = (s32)tv.tv_sec,
+				   .nsec = (s32)tv.tv_usec * 1000 } };
+}
+
+/**
+ * ktime_to_timespec - convert a ktime_t variable to timespec format
+ * @kt:		the ktime_t variable to convert
+ *
+ * Returns the timespec representation of the ktime value
+ */
+static inline struct timespec ktime_to_timespec(const ktime_t kt)
+{
+	return (struct timespec) { .tv_sec = (time_t) kt.tv.sec,
+				   .tv_nsec = (long) kt.tv.nsec };
+}
+
+/**
+ * ktime_to_timeval - convert a ktime_t variable to timeval format
+ * @kt:		the ktime_t variable to convert
+ *
+ * Returns the timeval representation of the ktime value
+ */
+static inline struct timeval ktime_to_timeval(const ktime_t kt)
+{
+	return (struct timeval) {
+		.tv_sec = (time_t) kt.tv.sec,
+		.tv_usec = (suseconds_t) (kt.tv.nsec / NSEC_PER_USEC) };
+}
+
+/**
+ * ktime_to_ns - convert a ktime_t variable to scalar nanoseconds
+ * @kt:		the ktime_t variable to convert
+ *
+ * Returns the scalar nanoseconds representation of @kt
+ */
+static inline s64 ktime_to_ns(const ktime_t kt)
+{
+	return (s64) kt.tv.sec * NSEC_PER_SEC + kt.tv.nsec;
+}
+
+#endif	/* !((BITS_PER_LONG == 64) || defined(CONFIG_KTIME_SCALAR)) */
+
+/**
+ * ktime_equal - Compares two ktime_t variables to see if they are equal
+ * @cmp1:	comparable1
+ * @cmp2:	comparable2
+ *
+ * Compare two ktime_t variables, returns 1 if equal
+ */
+static inline int ktime_equal(const ktime_t cmp1, const ktime_t cmp2)
+{
+	return cmp1.tv64 == cmp2.tv64;
+}
+
+static inline s64 ktime_to_us(const ktime_t kt)
+{
+	struct timeval tv = ktime_to_timeval(kt);
+	return (s64) tv.tv_sec * USEC_PER_SEC + tv.tv_usec;
+}
+
+static inline s64 ktime_to_ms(const ktime_t kt)
+{
+	struct timeval tv = ktime_to_timeval(kt);
+	return (s64) tv.tv_sec * MSEC_PER_SEC + tv.tv_usec / USEC_PER_MSEC;
+}
+
+static inline s64 ktime_us_delta(const ktime_t later, const ktime_t earlier)
+{
+       return ktime_to_us(ktime_sub(later, earlier));
+}
+
+static inline ktime_t ktime_add_us(const ktime_t kt, const u64 usec)
+{
+	return ktime_add_ns(kt, usec * 1000);
+}
+
+static inline ktime_t ktime_sub_us(const ktime_t kt, const u64 usec)
+{
+	return ktime_sub_ns(kt, usec * 1000);
+}
+
+extern ktime_t ktime_add_safe(const ktime_t lhs, const ktime_t rhs);
+
+/*
+ * The resolution of the clocks. The resolution value is returned in
+ * the clock_getres() system call to give application programmers an
+ * idea of the (in)accuracy of timers. Timer values are rounded up to
+ * this resolution values.
+ */
+#define LOW_RES_NSEC		TICK_NSEC
+#define KTIME_LOW_RES		(ktime_t){ .tv64 = LOW_RES_NSEC }
+
+/* Get the monotonic time in timespec format: */
+extern void ktime_get_ts(struct timespec *ts);
+
+/* Get the real (wall-) time in timespec format: */
+#define ktime_get_real_ts(ts)	getnstimeofday(ts)
+
+static inline ktime_t ns_to_ktime(u64 ns)
+{
+	static const ktime_t ktime_zero = { .tv64 = 0 };
+	return ktime_add_ns(ktime_zero, ns);
+}
+
+#endif
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
new file mode 100644
index 00000000..6c322a90
--- /dev/null
+++ b/include/linux/kvm.h
@@ -0,0 +1,913 @@
+#ifndef __LINUX_KVM_H
+#define __LINUX_KVM_H
+
+/*
+ * Userspace interface for /dev/kvm - kernel based virtual machine
+ *
+ * Note: you must update KVM_API_VERSION if you change this interface.
+ */
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/ioctl.h>
+#include <asm/kvm.h>
+
+#define KVM_API_VERSION 12
+
+/* *** Deprecated interfaces *** */
+
+#define KVM_TRC_SHIFT           16
+
+#define KVM_TRC_ENTRYEXIT       (1 << KVM_TRC_SHIFT)
+#define KVM_TRC_HANDLER         (1 << (KVM_TRC_SHIFT + 1))
+
+#define KVM_TRC_VMENTRY         (KVM_TRC_ENTRYEXIT + 0x01)
+#define KVM_TRC_VMEXIT          (KVM_TRC_ENTRYEXIT + 0x02)
+#define KVM_TRC_PAGE_FAULT      (KVM_TRC_HANDLER + 0x01)
+
+#define KVM_TRC_HEAD_SIZE       12
+#define KVM_TRC_CYCLE_SIZE      8
+#define KVM_TRC_EXTRA_MAX       7
+
+#define KVM_TRC_INJ_VIRQ         (KVM_TRC_HANDLER + 0x02)
+#define KVM_TRC_REDELIVER_EVT    (KVM_TRC_HANDLER + 0x03)
+#define KVM_TRC_PEND_INTR        (KVM_TRC_HANDLER + 0x04)
+#define KVM_TRC_IO_READ          (KVM_TRC_HANDLER + 0x05)
+#define KVM_TRC_IO_WRITE         (KVM_TRC_HANDLER + 0x06)
+#define KVM_TRC_CR_READ          (KVM_TRC_HANDLER + 0x07)
+#define KVM_TRC_CR_WRITE         (KVM_TRC_HANDLER + 0x08)
+#define KVM_TRC_DR_READ          (KVM_TRC_HANDLER + 0x09)
+#define KVM_TRC_DR_WRITE         (KVM_TRC_HANDLER + 0x0A)
+#define KVM_TRC_MSR_READ         (KVM_TRC_HANDLER + 0x0B)
+#define KVM_TRC_MSR_WRITE        (KVM_TRC_HANDLER + 0x0C)
+#define KVM_TRC_CPUID            (KVM_TRC_HANDLER + 0x0D)
+#define KVM_TRC_INTR             (KVM_TRC_HANDLER + 0x0E)
+#define KVM_TRC_NMI              (KVM_TRC_HANDLER + 0x0F)
+#define KVM_TRC_VMMCALL          (KVM_TRC_HANDLER + 0x10)
+#define KVM_TRC_HLT              (KVM_TRC_HANDLER + 0x11)
+#define KVM_TRC_CLTS             (KVM_TRC_HANDLER + 0x12)
+#define KVM_TRC_LMSW             (KVM_TRC_HANDLER + 0x13)
+#define KVM_TRC_APIC_ACCESS      (KVM_TRC_HANDLER + 0x14)
+#define KVM_TRC_TDP_FAULT        (KVM_TRC_HANDLER + 0x15)
+#define KVM_TRC_GTLB_WRITE       (KVM_TRC_HANDLER + 0x16)
+#define KVM_TRC_STLB_WRITE       (KVM_TRC_HANDLER + 0x17)
+#define KVM_TRC_STLB_INVAL       (KVM_TRC_HANDLER + 0x18)
+#define KVM_TRC_PPC_INSTR        (KVM_TRC_HANDLER + 0x19)
+
+struct kvm_user_trace_setup {
+	__u32 buf_size;
+	__u32 buf_nr;
+};
+
+#define __KVM_DEPRECATED_MAIN_W_0x06 \
+	_IOW(KVMIO, 0x06, struct kvm_user_trace_setup)
+#define __KVM_DEPRECATED_MAIN_0x07 _IO(KVMIO, 0x07)
+#define __KVM_DEPRECATED_MAIN_0x08 _IO(KVMIO, 0x08)
+
+#define __KVM_DEPRECATED_VM_R_0x70 _IOR(KVMIO, 0x70, struct kvm_assigned_irq)
+
+struct kvm_breakpoint {
+	__u32 enabled;
+	__u32 padding;
+	__u64 address;
+};
+
+struct kvm_debug_guest {
+	__u32 enabled;
+	__u32 pad;
+	struct kvm_breakpoint breakpoints[4];
+	__u32 singlestep;
+};
+
+#define __KVM_DEPRECATED_VCPU_W_0x87 _IOW(KVMIO, 0x87, struct kvm_debug_guest)
+
+/* *** End of deprecated interfaces *** */
+
+
+/* for KVM_CREATE_MEMORY_REGION */
+struct kvm_memory_region {
+	__u32 slot;
+	__u32 flags;
+	__u64 guest_phys_addr;
+	__u64 memory_size; /* bytes */
+};
+
+/* for KVM_SET_USER_MEMORY_REGION */
+struct kvm_userspace_memory_region {
+	__u32 slot;
+	__u32 flags;
+	__u64 guest_phys_addr;
+	__u64 memory_size; /* bytes */
+	__u64 userspace_addr; /* start of the userspace allocated memory */
+};
+
+/* for kvm_memory_region::flags */
+#define KVM_MEM_LOG_DIRTY_PAGES  1UL
+#define KVM_MEMSLOT_INVALID      (1UL << 1)
+
+/* for KVM_IRQ_LINE */
+struct kvm_irq_level {
+	/*
+	 * ACPI gsi notion of irq.
+	 * For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47..
+	 * For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23..
+	 */
+	union {
+		__u32 irq;
+		__s32 status;
+	};
+	__u32 level;
+};
+
+
+struct kvm_irqchip {
+	__u32 chip_id;
+	__u32 pad;
+        union {
+		char dummy[512];  /* reserving space */
+#ifdef __KVM_HAVE_PIT
+		struct kvm_pic_state pic;
+#endif
+#ifdef __KVM_HAVE_IOAPIC
+		struct kvm_ioapic_state ioapic;
+#endif
+	} chip;
+};
+
+/* for KVM_CREATE_PIT2 */
+struct kvm_pit_config {
+	__u32 flags;
+	__u32 pad[15];
+};
+
+#define KVM_PIT_SPEAKER_DUMMY     1
+
+#define KVM_EXIT_UNKNOWN          0
+#define KVM_EXIT_EXCEPTION        1
+#define KVM_EXIT_IO               2
+#define KVM_EXIT_HYPERCALL        3
+#define KVM_EXIT_DEBUG            4
+#define KVM_EXIT_HLT              5
+#define KVM_EXIT_MMIO             6
+#define KVM_EXIT_IRQ_WINDOW_OPEN  7
+#define KVM_EXIT_SHUTDOWN         8
+#define KVM_EXIT_FAIL_ENTRY       9
+#define KVM_EXIT_INTR             10
+#define KVM_EXIT_SET_TPR          11
+#define KVM_EXIT_TPR_ACCESS       12
+#define KVM_EXIT_S390_SIEIC       13
+#define KVM_EXIT_S390_RESET       14
+#define KVM_EXIT_DCR              15
+#define KVM_EXIT_NMI              16
+#define KVM_EXIT_INTERNAL_ERROR   17
+#define KVM_EXIT_OSI              18
+#define KVM_EXIT_PAPR_HCALL	  19
+#define KVM_EXIT_S390_UCONTROL	  20
+
+/* For KVM_EXIT_INTERNAL_ERROR */
+#define KVM_INTERNAL_ERROR_EMULATION 1
+#define KVM_INTERNAL_ERROR_SIMUL_EX 2
+
+/* for KVM_RUN, returned by mmap(vcpu_fd, offset=0) */
+struct kvm_run {
+	/* in */
+	__u8 request_interrupt_window;
+	__u8 padding1[7];
+
+	/* out */
+	__u32 exit_reason;
+	__u8 ready_for_interrupt_injection;
+	__u8 if_flag;
+	__u8 padding2[2];
+
+	/* in (pre_kvm_run), out (post_kvm_run) */
+	__u64 cr8;
+	__u64 apic_base;
+
+#ifdef __KVM_S390
+	/* the processor status word for s390 */
+	__u64 psw_mask; /* psw upper half */
+	__u64 psw_addr; /* psw lower half */
+#endif
+	union {
+		/* KVM_EXIT_UNKNOWN */
+		struct {
+			__u64 hardware_exit_reason;
+		} hw;
+		/* KVM_EXIT_FAIL_ENTRY */
+		struct {
+			__u64 hardware_entry_failure_reason;
+		} fail_entry;
+		/* KVM_EXIT_EXCEPTION */
+		struct {
+			__u32 exception;
+			__u32 error_code;
+		} ex;
+		/* KVM_EXIT_IO */
+		struct {
+#define KVM_EXIT_IO_IN  0
+#define KVM_EXIT_IO_OUT 1
+			__u8 direction;
+			__u8 size; /* bytes */
+			__u16 port;
+			__u32 count;
+			__u64 data_offset; /* relative to kvm_run start */
+		} io;
+		struct {
+			struct kvm_debug_exit_arch arch;
+		} debug;
+		/* KVM_EXIT_MMIO */
+		struct {
+			__u64 phys_addr;
+			__u8  data[8];
+			__u32 len;
+			__u8  is_write;
+		} mmio;
+		/* KVM_EXIT_HYPERCALL */
+		struct {
+			__u64 nr;
+			__u64 args[6];
+			__u64 ret;
+			__u32 longmode;
+			__u32 pad;
+		} hypercall;
+		/* KVM_EXIT_TPR_ACCESS */
+		struct {
+			__u64 rip;
+			__u32 is_write;
+			__u32 pad;
+		} tpr_access;
+		/* KVM_EXIT_S390_SIEIC */
+		struct {
+			__u8 icptcode;
+			__u16 ipa;
+			__u32 ipb;
+		} s390_sieic;
+		/* KVM_EXIT_S390_RESET */
+#define KVM_S390_RESET_POR       1
+#define KVM_S390_RESET_CLEAR     2
+#define KVM_S390_RESET_SUBSYSTEM 4
+#define KVM_S390_RESET_CPU_INIT  8
+#define KVM_S390_RESET_IPL       16
+		__u64 s390_reset_flags;
+		/* KVM_EXIT_S390_UCONTROL */
+		struct {
+			__u64 trans_exc_code;
+			__u32 pgm_code;
+		} s390_ucontrol;
+		/* KVM_EXIT_DCR */
+		struct {
+			__u32 dcrn;
+			__u32 data;
+			__u8  is_write;
+		} dcr;
+		struct {
+			__u32 suberror;
+			/* Available with KVM_CAP_INTERNAL_ERROR_DATA: */
+			__u32 ndata;
+			__u64 data[16];
+		} internal;
+		/* KVM_EXIT_OSI */
+		struct {
+			__u64 gprs[32];
+		} osi;
+		struct {
+			__u64 nr;
+			__u64 ret;
+			__u64 args[9];
+		} papr_hcall;
+		/* Fix the size of the union. */
+		char padding[256];
+	};
+
+	/*
+	 * shared registers between kvm and userspace.
+	 * kvm_valid_regs specifies the register classes set by the host
+	 * kvm_dirty_regs specified the register classes dirtied by userspace
+	 * struct kvm_sync_regs is architecture specific, as well as the
+	 * bits for kvm_valid_regs and kvm_dirty_regs
+	 */
+	__u64 kvm_valid_regs;
+	__u64 kvm_dirty_regs;
+	union {
+		struct kvm_sync_regs regs;
+		char padding[1024];
+	} s;
+};
+
+/* for KVM_REGISTER_COALESCED_MMIO / KVM_UNREGISTER_COALESCED_MMIO */
+
+struct kvm_coalesced_mmio_zone {
+	__u64 addr;
+	__u32 size;
+	__u32 pad;
+};
+
+struct kvm_coalesced_mmio {
+	__u64 phys_addr;
+	__u32 len;
+	__u32 pad;
+	__u8  data[8];
+};
+
+struct kvm_coalesced_mmio_ring {
+	__u32 first, last;
+	struct kvm_coalesced_mmio coalesced_mmio[0];
+};
+
+#define KVM_COALESCED_MMIO_MAX \
+	((PAGE_SIZE - sizeof(struct kvm_coalesced_mmio_ring)) / \
+	 sizeof(struct kvm_coalesced_mmio))
+
+/* for KVM_TRANSLATE */
+struct kvm_translation {
+	/* in */
+	__u64 linear_address;
+
+	/* out */
+	__u64 physical_address;
+	__u8  valid;
+	__u8  writeable;
+	__u8  usermode;
+	__u8  pad[5];
+};
+
+/* for KVM_INTERRUPT */
+struct kvm_interrupt {
+	/* in */
+	__u32 irq;
+};
+
+/* for KVM_GET_DIRTY_LOG */
+struct kvm_dirty_log {
+	__u32 slot;
+	__u32 padding1;
+	union {
+		void __user *dirty_bitmap; /* one bit per page */
+		__u64 padding2;
+	};
+};
+
+/* for KVM_SET_SIGNAL_MASK */
+struct kvm_signal_mask {
+	__u32 len;
+	__u8  sigset[0];
+};
+
+/* for KVM_TPR_ACCESS_REPORTING */
+struct kvm_tpr_access_ctl {
+	__u32 enabled;
+	__u32 flags;
+	__u32 reserved[8];
+};
+
+/* for KVM_SET_VAPIC_ADDR */
+struct kvm_vapic_addr {
+	__u64 vapic_addr;
+};
+
+/* for KVM_SET_MPSTATE */
+
+#define KVM_MP_STATE_RUNNABLE          0
+#define KVM_MP_STATE_UNINITIALIZED     1
+#define KVM_MP_STATE_INIT_RECEIVED     2
+#define KVM_MP_STATE_HALTED            3
+#define KVM_MP_STATE_SIPI_RECEIVED     4
+
+struct kvm_mp_state {
+	__u32 mp_state;
+};
+
+struct kvm_s390_psw {
+	__u64 mask;
+	__u64 addr;
+};
+
+/* valid values for type in kvm_s390_interrupt */
+#define KVM_S390_SIGP_STOP		0xfffe0000u
+#define KVM_S390_PROGRAM_INT		0xfffe0001u
+#define KVM_S390_SIGP_SET_PREFIX	0xfffe0002u
+#define KVM_S390_RESTART		0xfffe0003u
+#define KVM_S390_INT_VIRTIO		0xffff2603u
+#define KVM_S390_INT_SERVICE		0xffff2401u
+#define KVM_S390_INT_EMERGENCY		0xffff1201u
+#define KVM_S390_INT_EXTERNAL_CALL	0xffff1202u
+
+struct kvm_s390_interrupt {
+	__u32 type;
+	__u32 parm;
+	__u64 parm64;
+};
+
+/* for KVM_SET_GUEST_DEBUG */
+
+#define KVM_GUESTDBG_ENABLE		0x00000001
+#define KVM_GUESTDBG_SINGLESTEP		0x00000002
+
+struct kvm_guest_debug {
+	__u32 control;
+	__u32 pad;
+	struct kvm_guest_debug_arch arch;
+};
+
+enum {
+	kvm_ioeventfd_flag_nr_datamatch,
+	kvm_ioeventfd_flag_nr_pio,
+	kvm_ioeventfd_flag_nr_deassign,
+	kvm_ioeventfd_flag_nr_max,
+};
+
+#define KVM_IOEVENTFD_FLAG_DATAMATCH (1 << kvm_ioeventfd_flag_nr_datamatch)
+#define KVM_IOEVENTFD_FLAG_PIO       (1 << kvm_ioeventfd_flag_nr_pio)
+#define KVM_IOEVENTFD_FLAG_DEASSIGN  (1 << kvm_ioeventfd_flag_nr_deassign)
+
+#define KVM_IOEVENTFD_VALID_FLAG_MASK  ((1 << kvm_ioeventfd_flag_nr_max) - 1)
+
+struct kvm_ioeventfd {
+	__u64 datamatch;
+	__u64 addr;        /* legal pio/mmio address */
+	__u32 len;         /* 1, 2, 4, or 8 bytes    */
+	__s32 fd;
+	__u32 flags;
+	__u8  pad[36];
+};
+
+/* for KVM_ENABLE_CAP */
+struct kvm_enable_cap {
+	/* in */
+	__u32 cap;
+	__u32 flags;
+	__u64 args[4];
+	__u8  pad[64];
+};
+
+/* for KVM_PPC_GET_PVINFO */
+struct kvm_ppc_pvinfo {
+	/* out */
+	__u32 flags;
+	__u32 hcall[4];
+	__u8  pad[108];
+};
+
+#define KVMIO 0xAE
+
+/* machine type bits, to be used as argument to KVM_CREATE_VM */
+#define KVM_VM_S390_UCONTROL	1
+
+#define KVM_S390_SIE_PAGE_OFFSET 1
+
+/*
+ * ioctls for /dev/kvm fds:
+ */
+#define KVM_GET_API_VERSION       _IO(KVMIO,   0x00)
+#define KVM_CREATE_VM             _IO(KVMIO,   0x01) /* returns a VM fd */
+#define KVM_GET_MSR_INDEX_LIST    _IOWR(KVMIO, 0x02, struct kvm_msr_list)
+
+#define KVM_S390_ENABLE_SIE       _IO(KVMIO,   0x06)
+/*
+ * Check if a kvm extension is available.  Argument is extension number,
+ * return is 1 (yes) or 0 (no, sorry).
+ */
+#define KVM_CHECK_EXTENSION       _IO(KVMIO,   0x03)
+/*
+ * Get size for mmap(vcpu_fd)
+ */
+#define KVM_GET_VCPU_MMAP_SIZE    _IO(KVMIO,   0x04) /* in bytes */
+#define KVM_GET_SUPPORTED_CPUID   _IOWR(KVMIO, 0x05, struct kvm_cpuid2)
+#define KVM_TRACE_ENABLE          __KVM_DEPRECATED_MAIN_W_0x06
+#define KVM_TRACE_PAUSE           __KVM_DEPRECATED_MAIN_0x07
+#define KVM_TRACE_DISABLE         __KVM_DEPRECATED_MAIN_0x08
+
+/*
+ * Extension capability list.
+ */
+#define KVM_CAP_IRQCHIP	  0
+#define KVM_CAP_HLT	  1
+#define KVM_CAP_MMU_SHADOW_CACHE_CONTROL 2
+#define KVM_CAP_USER_MEMORY 3
+#define KVM_CAP_SET_TSS_ADDR 4
+#define KVM_CAP_VAPIC 6
+#define KVM_CAP_EXT_CPUID 7
+#define KVM_CAP_CLOCKSOURCE 8
+#define KVM_CAP_NR_VCPUS 9       /* returns recommended max vcpus per vm */
+#define KVM_CAP_NR_MEMSLOTS 10   /* returns max memory slots per vm */
+#define KVM_CAP_PIT 11
+#define KVM_CAP_NOP_IO_DELAY 12
+#define KVM_CAP_PV_MMU 13
+#define KVM_CAP_MP_STATE 14
+#define KVM_CAP_COALESCED_MMIO 15
+#define KVM_CAP_SYNC_MMU 16  /* Changes to host mmap are reflected in guest */
+#ifdef __KVM_HAVE_DEVICE_ASSIGNMENT
+#define KVM_CAP_DEVICE_ASSIGNMENT 17
+#endif
+#define KVM_CAP_IOMMU 18
+#ifdef __KVM_HAVE_MSI
+#define KVM_CAP_DEVICE_MSI 20
+#endif
+/* Bug in KVM_SET_USER_MEMORY_REGION fixed: */
+#define KVM_CAP_DESTROY_MEMORY_REGION_WORKS 21
+#ifdef __KVM_HAVE_USER_NMI
+#define KVM_CAP_USER_NMI 22
+#endif
+#ifdef __KVM_HAVE_GUEST_DEBUG
+#define KVM_CAP_SET_GUEST_DEBUG 23
+#endif
+#ifdef __KVM_HAVE_PIT
+#define KVM_CAP_REINJECT_CONTROL 24
+#endif
+#ifdef __KVM_HAVE_IOAPIC
+#define KVM_CAP_IRQ_ROUTING 25
+#endif
+#define KVM_CAP_IRQ_INJECT_STATUS 26
+#ifdef __KVM_HAVE_DEVICE_ASSIGNMENT
+#define KVM_CAP_DEVICE_DEASSIGNMENT 27
+#endif
+#ifdef __KVM_HAVE_MSIX
+#define KVM_CAP_DEVICE_MSIX 28
+#endif
+#define KVM_CAP_ASSIGN_DEV_IRQ 29
+/* Another bug in KVM_SET_USER_MEMORY_REGION fixed: */
+#define KVM_CAP_JOIN_MEMORY_REGIONS_WORKS 30
+#ifdef __KVM_HAVE_MCE
+#define KVM_CAP_MCE 31
+#endif
+#define KVM_CAP_IRQFD 32
+#ifdef __KVM_HAVE_PIT
+#define KVM_CAP_PIT2 33
+#endif
+#define KVM_CAP_SET_BOOT_CPU_ID 34
+#ifdef __KVM_HAVE_PIT_STATE2
+#define KVM_CAP_PIT_STATE2 35
+#endif
+#define KVM_CAP_IOEVENTFD 36
+#define KVM_CAP_SET_IDENTITY_MAP_ADDR 37
+#ifdef __KVM_HAVE_XEN_HVM
+#define KVM_CAP_XEN_HVM 38
+#endif
+#define KVM_CAP_ADJUST_CLOCK 39
+#define KVM_CAP_INTERNAL_ERROR_DATA 40
+#ifdef __KVM_HAVE_VCPU_EVENTS
+#define KVM_CAP_VCPU_EVENTS 41
+#endif
+#define KVM_CAP_S390_PSW 42
+#define KVM_CAP_PPC_SEGSTATE 43
+#define KVM_CAP_HYPERV 44
+#define KVM_CAP_HYPERV_VAPIC 45
+#define KVM_CAP_HYPERV_SPIN 46
+#define KVM_CAP_PCI_SEGMENT 47
+#define KVM_CAP_PPC_PAIRED_SINGLES 48
+#define KVM_CAP_INTR_SHADOW 49
+#ifdef __KVM_HAVE_DEBUGREGS
+#define KVM_CAP_DEBUGREGS 50
+#endif
+#define KVM_CAP_X86_ROBUST_SINGLESTEP 51
+#define KVM_CAP_PPC_OSI 52
+#define KVM_CAP_PPC_UNSET_IRQ 53
+#define KVM_CAP_ENABLE_CAP 54
+#ifdef __KVM_HAVE_XSAVE
+#define KVM_CAP_XSAVE 55
+#endif
+#ifdef __KVM_HAVE_XCRS
+#define KVM_CAP_XCRS 56
+#endif
+#define KVM_CAP_PPC_GET_PVINFO 57
+#define KVM_CAP_PPC_IRQ_LEVEL 58
+#define KVM_CAP_ASYNC_PF 59
+#define KVM_CAP_TSC_CONTROL 60
+#define KVM_CAP_GET_TSC_KHZ 61
+#define KVM_CAP_PPC_BOOKE_SREGS 62
+#define KVM_CAP_SPAPR_TCE 63
+#define KVM_CAP_PPC_SMT 64
+#define KVM_CAP_PPC_RMA	65
+#define KVM_CAP_MAX_VCPUS 66       /* returns max vcpus per vm */
+#define KVM_CAP_PPC_HIOR 67
+#define KVM_CAP_PPC_PAPR 68
+#define KVM_CAP_SW_TLB 69
+#define KVM_CAP_ONE_REG 70
+#define KVM_CAP_S390_GMAP 71
+#define KVM_CAP_TSC_DEADLINE_TIMER 72
+#define KVM_CAP_S390_UCONTROL 73
+#define KVM_CAP_SYNC_REGS 74
+#define KVM_CAP_PCI_2_3 75
+
+#ifdef KVM_CAP_IRQ_ROUTING
+
+struct kvm_irq_routing_irqchip {
+	__u32 irqchip;
+	__u32 pin;
+};
+
+struct kvm_irq_routing_msi {
+	__u32 address_lo;
+	__u32 address_hi;
+	__u32 data;
+	__u32 pad;
+};
+
+/* gsi routing entry types */
+#define KVM_IRQ_ROUTING_IRQCHIP 1
+#define KVM_IRQ_ROUTING_MSI 2
+
+struct kvm_irq_routing_entry {
+	__u32 gsi;
+	__u32 type;
+	__u32 flags;
+	__u32 pad;
+	union {
+		struct kvm_irq_routing_irqchip irqchip;
+		struct kvm_irq_routing_msi msi;
+		__u32 pad[8];
+	} u;
+};
+
+struct kvm_irq_routing {
+	__u32 nr;
+	__u32 flags;
+	struct kvm_irq_routing_entry entries[0];
+};
+
+#endif
+
+#ifdef KVM_CAP_MCE
+/* x86 MCE */
+struct kvm_x86_mce {
+	__u64 status;
+	__u64 addr;
+	__u64 misc;
+	__u64 mcg_status;
+	__u8 bank;
+	__u8 pad1[7];
+	__u64 pad2[3];
+};
+#endif
+
+#ifdef KVM_CAP_XEN_HVM
+struct kvm_xen_hvm_config {
+	__u32 flags;
+	__u32 msr;
+	__u64 blob_addr_32;
+	__u64 blob_addr_64;
+	__u8 blob_size_32;
+	__u8 blob_size_64;
+	__u8 pad2[30];
+};
+#endif
+
+#define KVM_IRQFD_FLAG_DEASSIGN (1 << 0)
+
+struct kvm_irqfd {
+	__u32 fd;
+	__u32 gsi;
+	__u32 flags;
+	__u8  pad[20];
+};
+
+struct kvm_clock_data {
+	__u64 clock;
+	__u32 flags;
+	__u32 pad[9];
+};
+
+#define KVM_MMU_FSL_BOOKE_NOHV		0
+#define KVM_MMU_FSL_BOOKE_HV		1
+
+struct kvm_config_tlb {
+	__u64 params;
+	__u64 array;
+	__u32 mmu_type;
+	__u32 array_len;
+};
+
+struct kvm_dirty_tlb {
+	__u64 bitmap;
+	__u32 num_dirty;
+};
+
+/* Available with KVM_CAP_ONE_REG */
+
+#define KVM_REG_ARCH_MASK	0xff00000000000000ULL
+#define KVM_REG_GENERIC		0x0000000000000000ULL
+
+/*
+ * Architecture specific registers are to be defined in arch headers and
+ * ORed with the arch identifier.
+ */
+#define KVM_REG_PPC		0x1000000000000000ULL
+#define KVM_REG_X86		0x2000000000000000ULL
+#define KVM_REG_IA64		0x3000000000000000ULL
+#define KVM_REG_ARM		0x4000000000000000ULL
+#define KVM_REG_S390		0x5000000000000000ULL
+
+#define KVM_REG_SIZE_SHIFT	52
+#define KVM_REG_SIZE_MASK	0x00f0000000000000ULL
+#define KVM_REG_SIZE_U8		0x0000000000000000ULL
+#define KVM_REG_SIZE_U16	0x0010000000000000ULL
+#define KVM_REG_SIZE_U32	0x0020000000000000ULL
+#define KVM_REG_SIZE_U64	0x0030000000000000ULL
+#define KVM_REG_SIZE_U128	0x0040000000000000ULL
+#define KVM_REG_SIZE_U256	0x0050000000000000ULL
+#define KVM_REG_SIZE_U512	0x0060000000000000ULL
+#define KVM_REG_SIZE_U1024	0x0070000000000000ULL
+
+struct kvm_one_reg {
+	__u64 id;
+	__u64 addr;
+};
+
+/*
+ * ioctls for VM fds
+ */
+#define KVM_SET_MEMORY_REGION     _IOW(KVMIO,  0x40, struct kvm_memory_region)
+/*
+ * KVM_CREATE_VCPU receives as a parameter the vcpu slot, and returns
+ * a vcpu fd.
+ */
+#define KVM_CREATE_VCPU           _IO(KVMIO,   0x41)
+#define KVM_GET_DIRTY_LOG         _IOW(KVMIO,  0x42, struct kvm_dirty_log)
+/* KVM_SET_MEMORY_ALIAS is obsolete: */
+#define KVM_SET_MEMORY_ALIAS      _IOW(KVMIO,  0x43, struct kvm_memory_alias)
+#define KVM_SET_NR_MMU_PAGES      _IO(KVMIO,   0x44)
+#define KVM_GET_NR_MMU_PAGES      _IO(KVMIO,   0x45)
+#define KVM_SET_USER_MEMORY_REGION _IOW(KVMIO, 0x46, \
+					struct kvm_userspace_memory_region)
+#define KVM_SET_TSS_ADDR          _IO(KVMIO,   0x47)
+#define KVM_SET_IDENTITY_MAP_ADDR _IOW(KVMIO,  0x48, __u64)
+
+/* enable ucontrol for s390 */
+struct kvm_s390_ucas_mapping {
+	__u64 user_addr;
+	__u64 vcpu_addr;
+	__u64 length;
+};
+#define KVM_S390_UCAS_MAP        _IOW(KVMIO, 0x50, struct kvm_s390_ucas_mapping)
+#define KVM_S390_UCAS_UNMAP      _IOW(KVMIO, 0x51, struct kvm_s390_ucas_mapping)
+#define KVM_S390_VCPU_FAULT	 _IOW(KVMIO, 0x52, unsigned long)
+
+/* Device model IOC */
+#define KVM_CREATE_IRQCHIP        _IO(KVMIO,   0x60)
+#define KVM_IRQ_LINE              _IOW(KVMIO,  0x61, struct kvm_irq_level)
+#define KVM_GET_IRQCHIP           _IOWR(KVMIO, 0x62, struct kvm_irqchip)
+#define KVM_SET_IRQCHIP           _IOR(KVMIO,  0x63, struct kvm_irqchip)
+#define KVM_CREATE_PIT            _IO(KVMIO,   0x64)
+#define KVM_GET_PIT               _IOWR(KVMIO, 0x65, struct kvm_pit_state)
+#define KVM_SET_PIT               _IOR(KVMIO,  0x66, struct kvm_pit_state)
+#define KVM_IRQ_LINE_STATUS       _IOWR(KVMIO, 0x67, struct kvm_irq_level)
+#define KVM_REGISTER_COALESCED_MMIO \
+			_IOW(KVMIO,  0x67, struct kvm_coalesced_mmio_zone)
+#define KVM_UNREGISTER_COALESCED_MMIO \
+			_IOW(KVMIO,  0x68, struct kvm_coalesced_mmio_zone)
+#define KVM_ASSIGN_PCI_DEVICE     _IOR(KVMIO,  0x69, \
+				       struct kvm_assigned_pci_dev)
+#define KVM_SET_GSI_ROUTING       _IOW(KVMIO,  0x6a, struct kvm_irq_routing)
+/* deprecated, replaced by KVM_ASSIGN_DEV_IRQ */
+#define KVM_ASSIGN_IRQ            __KVM_DEPRECATED_VM_R_0x70
+#define KVM_ASSIGN_DEV_IRQ        _IOW(KVMIO,  0x70, struct kvm_assigned_irq)
+#define KVM_REINJECT_CONTROL      _IO(KVMIO,   0x71)
+#define KVM_DEASSIGN_PCI_DEVICE   _IOW(KVMIO,  0x72, \
+				       struct kvm_assigned_pci_dev)
+#define KVM_ASSIGN_SET_MSIX_NR    _IOW(KVMIO,  0x73, \
+				       struct kvm_assigned_msix_nr)
+#define KVM_ASSIGN_SET_MSIX_ENTRY _IOW(KVMIO,  0x74, \
+				       struct kvm_assigned_msix_entry)
+#define KVM_DEASSIGN_DEV_IRQ      _IOW(KVMIO,  0x75, struct kvm_assigned_irq)
+#define KVM_IRQFD                 _IOW(KVMIO,  0x76, struct kvm_irqfd)
+#define KVM_CREATE_PIT2		  _IOW(KVMIO,  0x77, struct kvm_pit_config)
+#define KVM_SET_BOOT_CPU_ID       _IO(KVMIO,   0x78)
+#define KVM_IOEVENTFD             _IOW(KVMIO,  0x79, struct kvm_ioeventfd)
+#define KVM_XEN_HVM_CONFIG        _IOW(KVMIO,  0x7a, struct kvm_xen_hvm_config)
+#define KVM_SET_CLOCK             _IOW(KVMIO,  0x7b, struct kvm_clock_data)
+#define KVM_GET_CLOCK             _IOR(KVMIO,  0x7c, struct kvm_clock_data)
+/* Available with KVM_CAP_PIT_STATE2 */
+#define KVM_GET_PIT2              _IOR(KVMIO,  0x9f, struct kvm_pit_state2)
+#define KVM_SET_PIT2              _IOW(KVMIO,  0xa0, struct kvm_pit_state2)
+/* Available with KVM_CAP_PPC_GET_PVINFO */
+#define KVM_PPC_GET_PVINFO	  _IOW(KVMIO,  0xa1, struct kvm_ppc_pvinfo)
+/* Available with KVM_CAP_TSC_CONTROL */
+#define KVM_SET_TSC_KHZ           _IO(KVMIO,  0xa2)
+#define KVM_GET_TSC_KHZ           _IO(KVMIO,  0xa3)
+/* Available with KVM_CAP_PCI_2_3 */
+#define KVM_ASSIGN_SET_INTX_MASK  _IOW(KVMIO,  0xa4, \
+				       struct kvm_assigned_pci_dev)
+
+/*
+ * ioctls for vcpu fds
+ */
+#define KVM_RUN                   _IO(KVMIO,   0x80)
+#define KVM_GET_REGS              _IOR(KVMIO,  0x81, struct kvm_regs)
+#define KVM_SET_REGS              _IOW(KVMIO,  0x82, struct kvm_regs)
+#define KVM_GET_SREGS             _IOR(KVMIO,  0x83, struct kvm_sregs)
+#define KVM_SET_SREGS             _IOW(KVMIO,  0x84, struct kvm_sregs)
+#define KVM_TRANSLATE             _IOWR(KVMIO, 0x85, struct kvm_translation)
+#define KVM_INTERRUPT             _IOW(KVMIO,  0x86, struct kvm_interrupt)
+/* KVM_DEBUG_GUEST is no longer supported, use KVM_SET_GUEST_DEBUG instead */
+#define KVM_DEBUG_GUEST           __KVM_DEPRECATED_VCPU_W_0x87
+#define KVM_GET_MSRS              _IOWR(KVMIO, 0x88, struct kvm_msrs)
+#define KVM_SET_MSRS              _IOW(KVMIO,  0x89, struct kvm_msrs)
+#define KVM_SET_CPUID             _IOW(KVMIO,  0x8a, struct kvm_cpuid)
+#define KVM_SET_SIGNAL_MASK       _IOW(KVMIO,  0x8b, struct kvm_signal_mask)
+#define KVM_GET_FPU               _IOR(KVMIO,  0x8c, struct kvm_fpu)
+#define KVM_SET_FPU               _IOW(KVMIO,  0x8d, struct kvm_fpu)
+#define KVM_GET_LAPIC             _IOR(KVMIO,  0x8e, struct kvm_lapic_state)
+#define KVM_SET_LAPIC             _IOW(KVMIO,  0x8f, struct kvm_lapic_state)
+#define KVM_SET_CPUID2            _IOW(KVMIO,  0x90, struct kvm_cpuid2)
+#define KVM_GET_CPUID2            _IOWR(KVMIO, 0x91, struct kvm_cpuid2)
+/* Available with KVM_CAP_VAPIC */
+#define KVM_TPR_ACCESS_REPORTING  _IOWR(KVMIO, 0x92, struct kvm_tpr_access_ctl)
+/* Available with KVM_CAP_VAPIC */
+#define KVM_SET_VAPIC_ADDR        _IOW(KVMIO,  0x93, struct kvm_vapic_addr)
+/* valid for virtual machine (for floating interrupt)_and_ vcpu */
+#define KVM_S390_INTERRUPT        _IOW(KVMIO,  0x94, struct kvm_s390_interrupt)
+/* store status for s390 */
+#define KVM_S390_STORE_STATUS_NOADDR    (-1ul)
+#define KVM_S390_STORE_STATUS_PREFIXED  (-2ul)
+#define KVM_S390_STORE_STATUS	  _IOW(KVMIO,  0x95, unsigned long)
+/* initial ipl psw for s390 */
+#define KVM_S390_SET_INITIAL_PSW  _IOW(KVMIO,  0x96, struct kvm_s390_psw)
+/* initial reset for s390 */
+#define KVM_S390_INITIAL_RESET    _IO(KVMIO,   0x97)
+#define KVM_GET_MP_STATE          _IOR(KVMIO,  0x98, struct kvm_mp_state)
+#define KVM_SET_MP_STATE          _IOW(KVMIO,  0x99, struct kvm_mp_state)
+/* Available with KVM_CAP_NMI */
+#define KVM_NMI                   _IO(KVMIO,   0x9a)
+/* Available with KVM_CAP_SET_GUEST_DEBUG */
+#define KVM_SET_GUEST_DEBUG       _IOW(KVMIO,  0x9b, struct kvm_guest_debug)
+/* MCE for x86 */
+#define KVM_X86_SETUP_MCE         _IOW(KVMIO,  0x9c, __u64)
+#define KVM_X86_GET_MCE_CAP_SUPPORTED _IOR(KVMIO,  0x9d, __u64)
+#define KVM_X86_SET_MCE           _IOW(KVMIO,  0x9e, struct kvm_x86_mce)
+/* IA64 stack access */
+#define KVM_IA64_VCPU_GET_STACK   _IOR(KVMIO,  0x9a, void *)
+#define KVM_IA64_VCPU_SET_STACK   _IOW(KVMIO,  0x9b, void *)
+/* Available with KVM_CAP_VCPU_EVENTS */
+#define KVM_GET_VCPU_EVENTS       _IOR(KVMIO,  0x9f, struct kvm_vcpu_events)
+#define KVM_SET_VCPU_EVENTS       _IOW(KVMIO,  0xa0, struct kvm_vcpu_events)
+/* Available with KVM_CAP_DEBUGREGS */
+#define KVM_GET_DEBUGREGS         _IOR(KVMIO,  0xa1, struct kvm_debugregs)
+#define KVM_SET_DEBUGREGS         _IOW(KVMIO,  0xa2, struct kvm_debugregs)
+#define KVM_ENABLE_CAP            _IOW(KVMIO,  0xa3, struct kvm_enable_cap)
+/* Available with KVM_CAP_XSAVE */
+#define KVM_GET_XSAVE		  _IOR(KVMIO,  0xa4, struct kvm_xsave)
+#define KVM_SET_XSAVE		  _IOW(KVMIO,  0xa5, struct kvm_xsave)
+/* Available with KVM_CAP_XCRS */
+#define KVM_GET_XCRS		  _IOR(KVMIO,  0xa6, struct kvm_xcrs)
+#define KVM_SET_XCRS		  _IOW(KVMIO,  0xa7, struct kvm_xcrs)
+#define KVM_CREATE_SPAPR_TCE	  _IOW(KVMIO,  0xa8, struct kvm_create_spapr_tce)
+/* Available with KVM_CAP_RMA */
+#define KVM_ALLOCATE_RMA	  _IOR(KVMIO,  0xa9, struct kvm_allocate_rma)
+/* Available with KVM_CAP_SW_TLB */
+#define KVM_DIRTY_TLB		  _IOW(KVMIO,  0xaa, struct kvm_dirty_tlb)
+/* Available with KVM_CAP_ONE_REG */
+#define KVM_GET_ONE_REG		  _IOW(KVMIO,  0xab, struct kvm_one_reg)
+#define KVM_SET_ONE_REG		  _IOW(KVMIO,  0xac, struct kvm_one_reg)
+
+#define KVM_DEV_ASSIGN_ENABLE_IOMMU	(1 << 0)
+#define KVM_DEV_ASSIGN_PCI_2_3		(1 << 1)
+#define KVM_DEV_ASSIGN_MASK_INTX	(1 << 2)
+
+struct kvm_assigned_pci_dev {
+	__u32 assigned_dev_id;
+	__u32 busnr;
+	__u32 devfn;
+	__u32 flags;
+	__u32 segnr;
+	union {
+		__u32 reserved[11];
+	};
+};
+
+#define KVM_DEV_IRQ_HOST_INTX    (1 << 0)
+#define KVM_DEV_IRQ_HOST_MSI     (1 << 1)
+#define KVM_DEV_IRQ_HOST_MSIX    (1 << 2)
+
+#define KVM_DEV_IRQ_GUEST_INTX   (1 << 8)
+#define KVM_DEV_IRQ_GUEST_MSI    (1 << 9)
+#define KVM_DEV_IRQ_GUEST_MSIX   (1 << 10)
+
+#define KVM_DEV_IRQ_HOST_MASK	 0x00ff
+#define KVM_DEV_IRQ_GUEST_MASK   0xff00
+
+struct kvm_assigned_irq {
+	__u32 assigned_dev_id;
+	__u32 host_irq; /* ignored (legacy field) */
+	__u32 guest_irq;
+	__u32 flags;
+	union {
+		__u32 reserved[12];
+	};
+};
+
+struct kvm_assigned_msix_nr {
+	__u32 assigned_dev_id;
+	__u16 entry_nr;
+	__u16 padding;
+};
+
+#define KVM_MAX_MSIX_PER_DEV		256
+struct kvm_assigned_msix_entry {
+	__u32 assigned_dev_id;
+	__u32 gsi;
+	__u16 entry; /* The index of entry in the MSI-X table */
+	__u16 padding[3];
+};
+
+#endif /* __LINUX_KVM_H */
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
new file mode 100644
index 00000000..72cbf08d
--- /dev/null
+++ b/include/linux/kvm_host.h
@@ -0,0 +1,857 @@
+#ifndef __KVM_HOST_H
+#define __KVM_HOST_H
+
+/*
+ * This work is licensed under the terms of the GNU GPL, version 2.  See
+ * the COPYING file in the top-level directory.
+ */
+
+#include <linux/types.h>
+#include <linux/hardirq.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/bug.h>
+#include <linux/mm.h>
+#include <linux/mmu_notifier.h>
+#include <linux/preempt.h>
+#include <linux/msi.h>
+#include <linux/slab.h>
+#include <linux/rcupdate.h>
+#include <linux/ratelimit.h>
+#include <asm/signal.h>
+
+#include <linux/kvm.h>
+#include <linux/kvm_para.h>
+
+#include <linux/kvm_types.h>
+
+#include <asm/kvm_host.h>
+
+#ifndef KVM_MMIO_SIZE
+#define KVM_MMIO_SIZE 8
+#endif
+
+/*
+ * vcpu->requests bit members
+ */
+#define KVM_REQ_TLB_FLUSH          0
+#define KVM_REQ_MIGRATE_TIMER      1
+#define KVM_REQ_REPORT_TPR_ACCESS  2
+#define KVM_REQ_MMU_RELOAD         3
+#define KVM_REQ_TRIPLE_FAULT       4
+#define KVM_REQ_PENDING_TIMER      5
+#define KVM_REQ_UNHALT             6
+#define KVM_REQ_MMU_SYNC           7
+#define KVM_REQ_CLOCK_UPDATE       8
+#define KVM_REQ_KICK               9
+#define KVM_REQ_DEACTIVATE_FPU    10
+#define KVM_REQ_EVENT             11
+#define KVM_REQ_APF_HALT          12
+#define KVM_REQ_STEAL_UPDATE      13
+#define KVM_REQ_NMI               14
+#define KVM_REQ_IMMEDIATE_EXIT    15
+#define KVM_REQ_PMU               16
+#define KVM_REQ_PMI               17
+
+#define KVM_USERSPACE_IRQ_SOURCE_ID	0
+
+struct kvm;
+struct kvm_vcpu;
+extern struct kmem_cache *kvm_vcpu_cache;
+
+struct kvm_io_range {
+	gpa_t addr;
+	int len;
+	struct kvm_io_device *dev;
+};
+
+struct kvm_io_bus {
+	int                   dev_count;
+#define NR_IOBUS_DEVS 300
+	struct kvm_io_range range[NR_IOBUS_DEVS];
+};
+
+enum kvm_bus {
+	KVM_MMIO_BUS,
+	KVM_PIO_BUS,
+	KVM_NR_BUSES
+};
+
+int kvm_io_bus_write(struct kvm *kvm, enum kvm_bus bus_idx, gpa_t addr,
+		     int len, const void *val);
+int kvm_io_bus_read(struct kvm *kvm, enum kvm_bus bus_idx, gpa_t addr, int len,
+		    void *val);
+int kvm_io_bus_register_dev(struct kvm *kvm, enum kvm_bus bus_idx, gpa_t addr,
+			    int len, struct kvm_io_device *dev);
+int kvm_io_bus_unregister_dev(struct kvm *kvm, enum kvm_bus bus_idx,
+			      struct kvm_io_device *dev);
+
+#ifdef CONFIG_KVM_ASYNC_PF
+struct kvm_async_pf {
+	struct work_struct work;
+	struct list_head link;
+	struct list_head queue;
+	struct kvm_vcpu *vcpu;
+	struct mm_struct *mm;
+	gva_t gva;
+	unsigned long addr;
+	struct kvm_arch_async_pf arch;
+	struct page *page;
+	bool done;
+};
+
+void kvm_clear_async_pf_completion_queue(struct kvm_vcpu *vcpu);
+void kvm_check_async_pf_completion(struct kvm_vcpu *vcpu);
+int kvm_setup_async_pf(struct kvm_vcpu *vcpu, gva_t gva, gfn_t gfn,
+		       struct kvm_arch_async_pf *arch);
+int kvm_async_pf_wakeup_all(struct kvm_vcpu *vcpu);
+#endif
+
+enum {
+	OUTSIDE_GUEST_MODE,
+	IN_GUEST_MODE,
+	EXITING_GUEST_MODE
+};
+
+struct kvm_vcpu {
+	struct kvm *kvm;
+#ifdef CONFIG_PREEMPT_NOTIFIERS
+	struct preempt_notifier preempt_notifier;
+#endif
+	int cpu;
+	int vcpu_id;
+	int srcu_idx;
+	int mode;
+	unsigned long requests;
+	unsigned long guest_debug;
+
+	struct mutex mutex;
+	struct kvm_run *run;
+
+	int fpu_active;
+	int guest_fpu_loaded, guest_xcr0_loaded;
+	wait_queue_head_t wq;
+	struct pid *pid;
+	int sigset_active;
+	sigset_t sigset;
+	struct kvm_vcpu_stat stat;
+
+#ifdef CONFIG_HAS_IOMEM
+	int mmio_needed;
+	int mmio_read_completed;
+	int mmio_is_write;
+	int mmio_size;
+	int mmio_index;
+	unsigned char mmio_data[KVM_MMIO_SIZE];
+	gpa_t mmio_phys_addr;
+#endif
+
+#ifdef CONFIG_KVM_ASYNC_PF
+	struct {
+		u32 queued;
+		struct list_head queue;
+		struct list_head done;
+		spinlock_t lock;
+	} async_pf;
+#endif
+
+	struct kvm_vcpu_arch arch;
+};
+
+static inline int kvm_vcpu_exiting_guest_mode(struct kvm_vcpu *vcpu)
+{
+	return cmpxchg(&vcpu->mode, IN_GUEST_MODE, EXITING_GUEST_MODE);
+}
+
+/*
+ * Some of the bitops functions do not support too long bitmaps.
+ * This number must be determined not to exceed such limits.
+ */
+#define KVM_MEM_MAX_NR_PAGES ((1UL << 31) - 1)
+
+struct kvm_memory_slot {
+	gfn_t base_gfn;
+	unsigned long npages;
+	unsigned long flags;
+	unsigned long *rmap;
+	unsigned long *dirty_bitmap;
+	unsigned long *dirty_bitmap_head;
+	unsigned long nr_dirty_pages;
+	struct kvm_arch_memory_slot arch;
+	unsigned long userspace_addr;
+	int user_alloc;
+	int id;
+};
+
+static inline unsigned long kvm_dirty_bitmap_bytes(struct kvm_memory_slot *memslot)
+{
+	return ALIGN(memslot->npages, BITS_PER_LONG) / 8;
+}
+
+struct kvm_kernel_irq_routing_entry {
+	u32 gsi;
+	u32 type;
+	int (*set)(struct kvm_kernel_irq_routing_entry *e,
+		   struct kvm *kvm, int irq_source_id, int level);
+	union {
+		struct {
+			unsigned irqchip;
+			unsigned pin;
+		} irqchip;
+		struct msi_msg msi;
+	};
+	struct hlist_node link;
+};
+
+#ifdef __KVM_HAVE_IOAPIC
+
+struct kvm_irq_routing_table {
+	int chip[KVM_NR_IRQCHIPS][KVM_IOAPIC_NUM_PINS];
+	struct kvm_kernel_irq_routing_entry *rt_entries;
+	u32 nr_rt_entries;
+	/*
+	 * Array indexed by gsi. Each entry contains list of irq chips
+	 * the gsi is connected to.
+	 */
+	struct hlist_head map[0];
+};
+
+#else
+
+struct kvm_irq_routing_table {};
+
+#endif
+
+#ifndef KVM_MEM_SLOTS_NUM
+#define KVM_MEM_SLOTS_NUM (KVM_MEMORY_SLOTS + KVM_PRIVATE_MEM_SLOTS)
+#endif
+
+/*
+ * Note:
+ * memslots are not sorted by id anymore, please use id_to_memslot()
+ * to get the memslot by its id.
+ */
+struct kvm_memslots {
+	u64 generation;
+	struct kvm_memory_slot memslots[KVM_MEM_SLOTS_NUM];
+	/* The mapping table from slot id to the index in memslots[]. */
+	int id_to_index[KVM_MEM_SLOTS_NUM];
+};
+
+struct kvm {
+	spinlock_t mmu_lock;
+	struct mutex slots_lock;
+	struct mm_struct *mm; /* userspace tied to this vm */
+	struct kvm_memslots *memslots;
+	struct srcu_struct srcu;
+#ifdef CONFIG_KVM_APIC_ARCHITECTURE
+	u32 bsp_vcpu_id;
+#endif
+	struct kvm_vcpu *vcpus[KVM_MAX_VCPUS];
+	atomic_t online_vcpus;
+	int last_boosted_vcpu;
+	struct list_head vm_list;
+	struct mutex lock;
+	struct kvm_io_bus *buses[KVM_NR_BUSES];
+#ifdef CONFIG_HAVE_KVM_EVENTFD
+	struct {
+		spinlock_t        lock;
+		struct list_head  items;
+	} irqfds;
+	struct list_head ioeventfds;
+#endif
+	struct kvm_vm_stat stat;
+	struct kvm_arch arch;
+	atomic_t users_count;
+#ifdef KVM_COALESCED_MMIO_PAGE_OFFSET
+	struct kvm_coalesced_mmio_ring *coalesced_mmio_ring;
+	spinlock_t ring_lock;
+	struct list_head coalesced_zones;
+#endif
+
+	struct mutex irq_lock;
+#ifdef CONFIG_HAVE_KVM_IRQCHIP
+	/*
+	 * Update side is protected by irq_lock and,
+	 * if configured, irqfds.lock.
+	 */
+	struct kvm_irq_routing_table __rcu *irq_routing;
+	struct hlist_head mask_notifier_list;
+	struct hlist_head irq_ack_notifier_list;
+#endif
+
+#ifdef KVM_ARCH_WANT_MMU_NOTIFIER
+	struct mmu_notifier mmu_notifier;
+	unsigned long mmu_notifier_seq;
+	long mmu_notifier_count;
+#endif
+	long tlbs_dirty;
+};
+
+/* The guest did something we don't support. */
+#define pr_unimpl(vcpu, fmt, ...)					\
+	pr_err_ratelimited("kvm: %i: cpu%i " fmt,			\
+			   current->tgid, (vcpu)->vcpu_id , ## __VA_ARGS__)
+
+#define kvm_printf(kvm, fmt ...) printk(KERN_DEBUG fmt)
+#define vcpu_printf(vcpu, fmt...) kvm_printf(vcpu->kvm, fmt)
+
+static inline struct kvm_vcpu *kvm_get_vcpu(struct kvm *kvm, int i)
+{
+	smp_rmb();
+	return kvm->vcpus[i];
+}
+
+#define kvm_for_each_vcpu(idx, vcpup, kvm) \
+	for (idx = 0; \
+	     idx < atomic_read(&kvm->online_vcpus) && \
+	     (vcpup = kvm_get_vcpu(kvm, idx)) != NULL; \
+	     idx++)
+
+#define kvm_for_each_memslot(memslot, slots)	\
+	for (memslot = &slots->memslots[0];	\
+	      memslot < slots->memslots + KVM_MEM_SLOTS_NUM && memslot->npages;\
+		memslot++)
+
+int kvm_vcpu_init(struct kvm_vcpu *vcpu, struct kvm *kvm, unsigned id);
+void kvm_vcpu_uninit(struct kvm_vcpu *vcpu);
+
+void vcpu_load(struct kvm_vcpu *vcpu);
+void vcpu_put(struct kvm_vcpu *vcpu);
+
+int kvm_init(void *opaque, unsigned vcpu_size, unsigned vcpu_align,
+		  struct module *module);
+void kvm_exit(void);
+
+void kvm_get_kvm(struct kvm *kvm);
+void kvm_put_kvm(struct kvm *kvm);
+void update_memslots(struct kvm_memslots *slots, struct kvm_memory_slot *new);
+
+static inline struct kvm_memslots *kvm_memslots(struct kvm *kvm)
+{
+	return rcu_dereference_check(kvm->memslots,
+			srcu_read_lock_held(&kvm->srcu)
+			|| lockdep_is_held(&kvm->slots_lock));
+}
+
+static inline struct kvm_memory_slot *
+id_to_memslot(struct kvm_memslots *slots, int id)
+{
+	int index = slots->id_to_index[id];
+	struct kvm_memory_slot *slot;
+
+	slot = &slots->memslots[index];
+
+	WARN_ON(slot->id != id);
+	return slot;
+}
+
+#define HPA_MSB ((sizeof(hpa_t) * 8) - 1)
+#define HPA_ERR_MASK ((hpa_t)1 << HPA_MSB)
+static inline int is_error_hpa(hpa_t hpa) { return hpa >> HPA_MSB; }
+
+extern struct page *bad_page;
+extern struct page *fault_page;
+
+extern pfn_t bad_pfn;
+extern pfn_t fault_pfn;
+
+int is_error_page(struct page *page);
+int is_error_pfn(pfn_t pfn);
+int is_hwpoison_pfn(pfn_t pfn);
+int is_fault_pfn(pfn_t pfn);
+int is_noslot_pfn(pfn_t pfn);
+int is_invalid_pfn(pfn_t pfn);
+int kvm_is_error_hva(unsigned long addr);
+int kvm_set_memory_region(struct kvm *kvm,
+			  struct kvm_userspace_memory_region *mem,
+			  int user_alloc);
+int __kvm_set_memory_region(struct kvm *kvm,
+			    struct kvm_userspace_memory_region *mem,
+			    int user_alloc);
+void kvm_arch_free_memslot(struct kvm_memory_slot *free,
+			   struct kvm_memory_slot *dont);
+int kvm_arch_create_memslot(struct kvm_memory_slot *slot, unsigned long npages);
+int kvm_arch_prepare_memory_region(struct kvm *kvm,
+				struct kvm_memory_slot *memslot,
+				struct kvm_memory_slot old,
+				struct kvm_userspace_memory_region *mem,
+				int user_alloc);
+void kvm_arch_commit_memory_region(struct kvm *kvm,
+				struct kvm_userspace_memory_region *mem,
+				struct kvm_memory_slot old,
+				int user_alloc);
+bool kvm_largepages_enabled(void);
+void kvm_disable_largepages(void);
+void kvm_arch_flush_shadow(struct kvm *kvm);
+
+int gfn_to_page_many_atomic(struct kvm *kvm, gfn_t gfn, struct page **pages,
+			    int nr_pages);
+
+struct page *gfn_to_page(struct kvm *kvm, gfn_t gfn);
+unsigned long gfn_to_hva(struct kvm *kvm, gfn_t gfn);
+void kvm_release_page_clean(struct page *page);
+void kvm_release_page_dirty(struct page *page);
+void kvm_set_page_dirty(struct page *page);
+void kvm_set_page_accessed(struct page *page);
+
+pfn_t hva_to_pfn_atomic(struct kvm *kvm, unsigned long addr);
+pfn_t gfn_to_pfn_atomic(struct kvm *kvm, gfn_t gfn);
+pfn_t gfn_to_pfn_async(struct kvm *kvm, gfn_t gfn, bool *async,
+		       bool write_fault, bool *writable);
+pfn_t gfn_to_pfn(struct kvm *kvm, gfn_t gfn);
+pfn_t gfn_to_pfn_prot(struct kvm *kvm, gfn_t gfn, bool write_fault,
+		      bool *writable);
+pfn_t gfn_to_pfn_memslot(struct kvm *kvm,
+			 struct kvm_memory_slot *slot, gfn_t gfn);
+void kvm_release_pfn_dirty(pfn_t);
+void kvm_release_pfn_clean(pfn_t pfn);
+void kvm_set_pfn_dirty(pfn_t pfn);
+void kvm_set_pfn_accessed(pfn_t pfn);
+void kvm_get_pfn(pfn_t pfn);
+
+int kvm_read_guest_page(struct kvm *kvm, gfn_t gfn, void *data, int offset,
+			int len);
+int kvm_read_guest_atomic(struct kvm *kvm, gpa_t gpa, void *data,
+			  unsigned long len);
+int kvm_read_guest(struct kvm *kvm, gpa_t gpa, void *data, unsigned long len);
+int kvm_read_guest_cached(struct kvm *kvm, struct gfn_to_hva_cache *ghc,
+			   void *data, unsigned long len);
+int kvm_write_guest_page(struct kvm *kvm, gfn_t gfn, const void *data,
+			 int offset, int len);
+int kvm_write_guest(struct kvm *kvm, gpa_t gpa, const void *data,
+		    unsigned long len);
+int kvm_write_guest_cached(struct kvm *kvm, struct gfn_to_hva_cache *ghc,
+			   void *data, unsigned long len);
+int kvm_gfn_to_hva_cache_init(struct kvm *kvm, struct gfn_to_hva_cache *ghc,
+			      gpa_t gpa);
+int kvm_clear_guest_page(struct kvm *kvm, gfn_t gfn, int offset, int len);
+int kvm_clear_guest(struct kvm *kvm, gpa_t gpa, unsigned long len);
+struct kvm_memory_slot *gfn_to_memslot(struct kvm *kvm, gfn_t gfn);
+int kvm_is_visible_gfn(struct kvm *kvm, gfn_t gfn);
+unsigned long kvm_host_page_size(struct kvm *kvm, gfn_t gfn);
+void mark_page_dirty(struct kvm *kvm, gfn_t gfn);
+void mark_page_dirty_in_slot(struct kvm *kvm, struct kvm_memory_slot *memslot,
+			     gfn_t gfn);
+
+void kvm_vcpu_block(struct kvm_vcpu *vcpu);
+void kvm_vcpu_on_spin(struct kvm_vcpu *vcpu);
+void kvm_resched(struct kvm_vcpu *vcpu);
+void kvm_load_guest_fpu(struct kvm_vcpu *vcpu);
+void kvm_put_guest_fpu(struct kvm_vcpu *vcpu);
+
+void kvm_flush_remote_tlbs(struct kvm *kvm);
+void kvm_reload_remote_mmus(struct kvm *kvm);
+
+long kvm_arch_dev_ioctl(struct file *filp,
+			unsigned int ioctl, unsigned long arg);
+long kvm_arch_vcpu_ioctl(struct file *filp,
+			 unsigned int ioctl, unsigned long arg);
+int kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf);
+
+int kvm_dev_ioctl_check_extension(long ext);
+
+int kvm_get_dirty_log(struct kvm *kvm,
+			struct kvm_dirty_log *log, int *is_dirty);
+int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
+				struct kvm_dirty_log *log);
+
+int kvm_vm_ioctl_set_memory_region(struct kvm *kvm,
+				   struct
+				   kvm_userspace_memory_region *mem,
+				   int user_alloc);
+long kvm_arch_vm_ioctl(struct file *filp,
+		       unsigned int ioctl, unsigned long arg);
+
+int kvm_arch_vcpu_ioctl_get_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu);
+int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu);
+
+int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu,
+				    struct kvm_translation *tr);
+
+int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs);
+int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs);
+int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
+				  struct kvm_sregs *sregs);
+int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
+				  struct kvm_sregs *sregs);
+int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
+				    struct kvm_mp_state *mp_state);
+int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
+				    struct kvm_mp_state *mp_state);
+int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
+					struct kvm_guest_debug *dbg);
+int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run);
+
+int kvm_arch_init(void *opaque);
+void kvm_arch_exit(void);
+
+int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu);
+void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu);
+
+void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu);
+void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu);
+void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu);
+struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id);
+int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu);
+void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu);
+
+int kvm_arch_vcpu_reset(struct kvm_vcpu *vcpu);
+int kvm_arch_hardware_enable(void *garbage);
+void kvm_arch_hardware_disable(void *garbage);
+int kvm_arch_hardware_setup(void);
+void kvm_arch_hardware_unsetup(void);
+void kvm_arch_check_processor_compat(void *rtn);
+int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu);
+
+void kvm_free_physmem(struct kvm *kvm);
+
+#ifndef __KVM_HAVE_ARCH_VM_ALLOC
+static inline struct kvm *kvm_arch_alloc_vm(void)
+{
+	return kzalloc(sizeof(struct kvm), GFP_KERNEL);
+}
+
+static inline void kvm_arch_free_vm(struct kvm *kvm)
+{
+	kfree(kvm);
+}
+#endif
+
+int kvm_arch_init_vm(struct kvm *kvm, unsigned long type);
+void kvm_arch_destroy_vm(struct kvm *kvm);
+void kvm_free_all_assigned_devices(struct kvm *kvm);
+void kvm_arch_sync_events(struct kvm *kvm);
+
+int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu);
+void kvm_vcpu_kick(struct kvm_vcpu *vcpu);
+
+int kvm_is_mmio_pfn(pfn_t pfn);
+
+struct kvm_irq_ack_notifier {
+	struct hlist_node link;
+	unsigned gsi;
+	void (*irq_acked)(struct kvm_irq_ack_notifier *kian);
+};
+
+struct kvm_assigned_dev_kernel {
+	struct kvm_irq_ack_notifier ack_notifier;
+	struct list_head list;
+	int assigned_dev_id;
+	int host_segnr;
+	int host_busnr;
+	int host_devfn;
+	unsigned int entries_nr;
+	int host_irq;
+	bool host_irq_disabled;
+	bool pci_2_3;
+	struct msix_entry *host_msix_entries;
+	int guest_irq;
+	struct msix_entry *guest_msix_entries;
+	unsigned long irq_requested_type;
+	int irq_source_id;
+	int flags;
+	struct pci_dev *dev;
+	struct kvm *kvm;
+	spinlock_t intx_lock;
+	spinlock_t intx_mask_lock;
+	char irq_name[32];
+	struct pci_saved_state *pci_saved_state;
+};
+
+struct kvm_irq_mask_notifier {
+	void (*func)(struct kvm_irq_mask_notifier *kimn, bool masked);
+	int irq;
+	struct hlist_node link;
+};
+
+void kvm_register_irq_mask_notifier(struct kvm *kvm, int irq,
+				    struct kvm_irq_mask_notifier *kimn);
+void kvm_unregister_irq_mask_notifier(struct kvm *kvm, int irq,
+				      struct kvm_irq_mask_notifier *kimn);
+void kvm_fire_mask_notifiers(struct kvm *kvm, unsigned irqchip, unsigned pin,
+			     bool mask);
+
+#ifdef __KVM_HAVE_IOAPIC
+void kvm_get_intr_delivery_bitmask(struct kvm_ioapic *ioapic,
+				   union kvm_ioapic_redirect_entry *entry,
+				   unsigned long *deliver_bitmask);
+#endif
+int kvm_set_irq(struct kvm *kvm, int irq_source_id, u32 irq, int level);
+int kvm_set_msi(struct kvm_kernel_irq_routing_entry *irq_entry, struct kvm *kvm,
+		int irq_source_id, int level);
+void kvm_notify_acked_irq(struct kvm *kvm, unsigned irqchip, unsigned pin);
+void kvm_register_irq_ack_notifier(struct kvm *kvm,
+				   struct kvm_irq_ack_notifier *kian);
+void kvm_unregister_irq_ack_notifier(struct kvm *kvm,
+				   struct kvm_irq_ack_notifier *kian);
+int kvm_request_irq_source_id(struct kvm *kvm);
+void kvm_free_irq_source_id(struct kvm *kvm, int irq_source_id);
+
+/* For vcpu->arch.iommu_flags */
+#define KVM_IOMMU_CACHE_COHERENCY	0x1
+
+#ifdef CONFIG_IOMMU_API
+int kvm_iommu_map_pages(struct kvm *kvm, struct kvm_memory_slot *slot);
+void kvm_iommu_unmap_pages(struct kvm *kvm, struct kvm_memory_slot *slot);
+int kvm_iommu_map_guest(struct kvm *kvm);
+int kvm_iommu_unmap_guest(struct kvm *kvm);
+int kvm_assign_device(struct kvm *kvm,
+		      struct kvm_assigned_dev_kernel *assigned_dev);
+int kvm_deassign_device(struct kvm *kvm,
+			struct kvm_assigned_dev_kernel *assigned_dev);
+#else /* CONFIG_IOMMU_API */
+static inline int kvm_iommu_map_pages(struct kvm *kvm,
+				      struct kvm_memory_slot *slot)
+{
+	return 0;
+}
+
+static inline void kvm_iommu_unmap_pages(struct kvm *kvm,
+					 struct kvm_memory_slot *slot)
+{
+}
+
+static inline int kvm_iommu_map_guest(struct kvm *kvm)
+{
+	return -ENODEV;
+}
+
+static inline int kvm_iommu_unmap_guest(struct kvm *kvm)
+{
+	return 0;
+}
+
+static inline int kvm_assign_device(struct kvm *kvm,
+		struct kvm_assigned_dev_kernel *assigned_dev)
+{
+	return 0;
+}
+
+static inline int kvm_deassign_device(struct kvm *kvm,
+		struct kvm_assigned_dev_kernel *assigned_dev)
+{
+	return 0;
+}
+#endif /* CONFIG_IOMMU_API */
+
+static inline void kvm_guest_enter(void)
+{
+	BUG_ON(preemptible());
+	account_system_vtime(current);
+	current->flags |= PF_VCPU;
+	/* KVM does not hold any references to rcu protected data when it
+	 * switches CPU into a guest mode. In fact switching to a guest mode
+	 * is very similar to exiting to userspase from rcu point of view. In
+	 * addition CPU may stay in a guest mode for quite a long time (up to
+	 * one time slice). Lets treat guest mode as quiescent state, just like
+	 * we do with user-mode execution.
+	 */
+	rcu_virt_note_context_switch(smp_processor_id());
+}
+
+static inline void kvm_guest_exit(void)
+{
+	account_system_vtime(current);
+	current->flags &= ~PF_VCPU;
+}
+
+/*
+ * search_memslots() and __gfn_to_memslot() are here because they are
+ * used in non-modular code in arch/powerpc/kvm/book3s_hv_rm_mmu.c.
+ * gfn_to_memslot() itself isn't here as an inline because that would
+ * bloat other code too much.
+ */
+static inline struct kvm_memory_slot *
+search_memslots(struct kvm_memslots *slots, gfn_t gfn)
+{
+	struct kvm_memory_slot *memslot;
+
+	kvm_for_each_memslot(memslot, slots)
+		if (gfn >= memslot->base_gfn &&
+		      gfn < memslot->base_gfn + memslot->npages)
+			return memslot;
+
+	return NULL;
+}
+
+static inline struct kvm_memory_slot *
+__gfn_to_memslot(struct kvm_memslots *slots, gfn_t gfn)
+{
+	return search_memslots(slots, gfn);
+}
+
+static inline int memslot_id(struct kvm *kvm, gfn_t gfn)
+{
+	return gfn_to_memslot(kvm, gfn)->id;
+}
+
+static inline gfn_t gfn_to_index(gfn_t gfn, gfn_t base_gfn, int level)
+{
+	/* KVM_HPAGE_GFN_SHIFT(PT_PAGE_TABLE_LEVEL) must be 0. */
+	return (gfn >> KVM_HPAGE_GFN_SHIFT(level)) -
+		(base_gfn >> KVM_HPAGE_GFN_SHIFT(level));
+}
+
+static inline unsigned long gfn_to_hva_memslot(struct kvm_memory_slot *slot,
+					       gfn_t gfn)
+{
+	return slot->userspace_addr + (gfn - slot->base_gfn) * PAGE_SIZE;
+}
+
+static inline gpa_t gfn_to_gpa(gfn_t gfn)
+{
+	return (gpa_t)gfn << PAGE_SHIFT;
+}
+
+static inline gfn_t gpa_to_gfn(gpa_t gpa)
+{
+	return (gfn_t)(gpa >> PAGE_SHIFT);
+}
+
+static inline hpa_t pfn_to_hpa(pfn_t pfn)
+{
+	return (hpa_t)pfn << PAGE_SHIFT;
+}
+
+static inline void kvm_migrate_timers(struct kvm_vcpu *vcpu)
+{
+	set_bit(KVM_REQ_MIGRATE_TIMER, &vcpu->requests);
+}
+
+enum kvm_stat_kind {
+	KVM_STAT_VM,
+	KVM_STAT_VCPU,
+};
+
+struct kvm_stats_debugfs_item {
+	const char *name;
+	int offset;
+	enum kvm_stat_kind kind;
+	struct dentry *dentry;
+};
+extern struct kvm_stats_debugfs_item debugfs_entries[];
+extern struct dentry *kvm_debugfs_dir;
+
+#ifdef KVM_ARCH_WANT_MMU_NOTIFIER
+static inline int mmu_notifier_retry(struct kvm_vcpu *vcpu, unsigned long mmu_seq)
+{
+	if (unlikely(vcpu->kvm->mmu_notifier_count))
+		return 1;
+	/*
+	 * Ensure the read of mmu_notifier_count happens before the read
+	 * of mmu_notifier_seq.  This interacts with the smp_wmb() in
+	 * mmu_notifier_invalidate_range_end to make sure that the caller
+	 * either sees the old (non-zero) value of mmu_notifier_count or
+	 * the new (incremented) value of mmu_notifier_seq.
+	 * PowerPC Book3s HV KVM calls this under a per-page lock
+	 * rather than under kvm->mmu_lock, for scalability, so
+	 * can't rely on kvm->mmu_lock to keep things ordered.
+	 */
+	smp_rmb();
+	if (vcpu->kvm->mmu_notifier_seq != mmu_seq)
+		return 1;
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_HAVE_KVM_IRQCHIP
+
+#define KVM_MAX_IRQ_ROUTES 1024
+
+int kvm_setup_default_irq_routing(struct kvm *kvm);
+int kvm_set_irq_routing(struct kvm *kvm,
+			const struct kvm_irq_routing_entry *entries,
+			unsigned nr,
+			unsigned flags);
+void kvm_free_irq_routing(struct kvm *kvm);
+
+#else
+
+static inline void kvm_free_irq_routing(struct kvm *kvm) {}
+
+#endif
+
+#ifdef CONFIG_HAVE_KVM_EVENTFD
+
+void kvm_eventfd_init(struct kvm *kvm);
+int kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags);
+void kvm_irqfd_release(struct kvm *kvm);
+void kvm_irq_routing_update(struct kvm *, struct kvm_irq_routing_table *);
+int kvm_ioeventfd(struct kvm *kvm, struct kvm_ioeventfd *args);
+
+#else
+
+static inline void kvm_eventfd_init(struct kvm *kvm) {}
+
+static inline int kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags)
+{
+	return -EINVAL;
+}
+
+static inline void kvm_irqfd_release(struct kvm *kvm) {}
+
+#ifdef CONFIG_HAVE_KVM_IRQCHIP
+static inline void kvm_irq_routing_update(struct kvm *kvm,
+					  struct kvm_irq_routing_table *irq_rt)
+{
+	rcu_assign_pointer(kvm->irq_routing, irq_rt);
+}
+#endif
+
+static inline int kvm_ioeventfd(struct kvm *kvm, struct kvm_ioeventfd *args)
+{
+	return -ENOSYS;
+}
+
+#endif /* CONFIG_HAVE_KVM_EVENTFD */
+
+#ifdef CONFIG_KVM_APIC_ARCHITECTURE
+static inline bool kvm_vcpu_is_bsp(struct kvm_vcpu *vcpu)
+{
+	return vcpu->kvm->bsp_vcpu_id == vcpu->vcpu_id;
+}
+
+bool kvm_vcpu_compatible(struct kvm_vcpu *vcpu);
+
+#else
+
+static inline bool kvm_vcpu_compatible(struct kvm_vcpu *vcpu) { return true; }
+
+#endif
+
+#ifdef __KVM_HAVE_DEVICE_ASSIGNMENT
+
+long kvm_vm_ioctl_assigned_device(struct kvm *kvm, unsigned ioctl,
+				  unsigned long arg);
+
+#else
+
+static inline long kvm_vm_ioctl_assigned_device(struct kvm *kvm, unsigned ioctl,
+						unsigned long arg)
+{
+	return -ENOTTY;
+}
+
+#endif
+
+static inline void kvm_make_request(int req, struct kvm_vcpu *vcpu)
+{
+	set_bit(req, &vcpu->requests);
+}
+
+static inline bool kvm_check_request(int req, struct kvm_vcpu *vcpu)
+{
+	if (test_bit(req, &vcpu->requests)) {
+		clear_bit(req, &vcpu->requests);
+		return true;
+	} else {
+		return false;
+	}
+}
+
+#endif
+
diff --git a/include/linux/kvm_para.h b/include/linux/kvm_para.h
new file mode 100644
index 00000000..ff476dda
--- /dev/null
+++ b/include/linux/kvm_para.h
@@ -0,0 +1,37 @@
+#ifndef __LINUX_KVM_PARA_H
+#define __LINUX_KVM_PARA_H
+
+/*
+ * This header file provides a method for making a hypercall to the host
+ * Architectures should define:
+ * - kvm_hypercall0, kvm_hypercall1...
+ * - kvm_arch_para_features
+ * - kvm_para_available
+ */
+
+/* Return values for hypercalls */
+#define KVM_ENOSYS		1000
+#define KVM_EFAULT		EFAULT
+#define KVM_E2BIG		E2BIG
+#define KVM_EPERM		EPERM
+
+#define KVM_HC_VAPIC_POLL_IRQ		1
+#define KVM_HC_MMU_OP			2
+#define KVM_HC_FEATURES			3
+#define KVM_HC_PPC_MAP_MAGIC_PAGE	4
+
+/*
+ * hypercalls use architecture specific
+ */
+#include <asm/kvm_para.h>
+
+#ifdef __KERNEL__
+
+static inline int kvm_para_has_feature(unsigned int feature)
+{
+	if (kvm_arch_para_features() & (1UL << feature))
+		return 1;
+	return 0;
+}
+#endif /* __KERNEL__ */
+#endif /* __LINUX_KVM_PARA_H */
diff --git a/include/linux/kvm_types.h b/include/linux/kvm_types.h
new file mode 100644
index 00000000..fa7cc724
--- /dev/null
+++ b/include/linux/kvm_types.h
@@ -0,0 +1,77 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ */
+
+#ifndef __KVM_TYPES_H__
+#define __KVM_TYPES_H__
+
+#include <asm/types.h>
+
+/*
+ * Address types:
+ *
+ *  gva - guest virtual address
+ *  gpa - guest physical address
+ *  gfn - guest frame number
+ *  hva - host virtual address
+ *  hpa - host physical address
+ *  hfn - host frame number
+ */
+
+typedef unsigned long  gva_t;
+typedef u64            gpa_t;
+typedef u64            gfn_t;
+
+typedef unsigned long  hva_t;
+typedef u64            hpa_t;
+typedef u64            hfn_t;
+
+typedef hfn_t pfn_t;
+
+union kvm_ioapic_redirect_entry {
+	u64 bits;
+	struct {
+		u8 vector;
+		u8 delivery_mode:3;
+		u8 dest_mode:1;
+		u8 delivery_status:1;
+		u8 polarity:1;
+		u8 remote_irr:1;
+		u8 trig_mode:1;
+		u8 mask:1;
+		u8 reserve:7;
+		u8 reserved[4];
+		u8 dest_id;
+	} fields;
+};
+
+struct kvm_lapic_irq {
+	u32 vector;
+	u32 delivery_mode;
+	u32 dest_mode;
+	u32 level;
+	u32 trig_mode;
+	u32 shorthand;
+	u32 dest_id;
+};
+
+struct gfn_to_hva_cache {
+	u64 generation;
+	gpa_t gpa;
+	unsigned long hva;
+	struct kvm_memory_slot *memslot;
+};
+
+#endif /* __KVM_TYPES_H__ */
diff --git a/include/linux/l2tp.h b/include/linux/l2tp.h
new file mode 100644
index 00000000..e77d7f9b
--- /dev/null
+++ b/include/linux/l2tp.h
@@ -0,0 +1,164 @@
+/*
+ * L2TP-over-IP socket for L2TPv3.
+ *
+ * Author: James Chapman <jchapman@katalix.com>
+ */
+
+#ifndef _LINUX_L2TP_H_
+#define _LINUX_L2TP_H_
+
+#include <linux/types.h>
+#include <linux/socket.h>
+#ifdef __KERNEL__
+#include <linux/in.h>
+#else
+#include <netinet/in.h>
+#endif
+
+#define IPPROTO_L2TP		115
+
+/**
+ * struct sockaddr_l2tpip - the sockaddr structure for L2TP-over-IP sockets
+ * @l2tp_family:  address family number AF_L2TPIP.
+ * @l2tp_addr:    protocol specific address information
+ * @l2tp_conn_id: connection id of tunnel
+ */
+#define __SOCK_SIZE__	16		/* sizeof(struct sockaddr)	*/
+struct sockaddr_l2tpip {
+	/* The first fields must match struct sockaddr_in */
+	__kernel_sa_family_t l2tp_family; /* AF_INET */
+	__be16		l2tp_unused;	/* INET port number (unused) */
+	struct in_addr	l2tp_addr;	/* Internet address */
+
+	__u32		l2tp_conn_id;	/* Connection ID of tunnel */
+
+	/* Pad to size of `struct sockaddr'. */
+	unsigned char	__pad[sizeof(struct sockaddr) -
+			      sizeof(__kernel_sa_family_t) -
+			      sizeof(__be16) - sizeof(struct in_addr) -
+			      sizeof(__u32)];
+};
+
+/*****************************************************************************
+ *  NETLINK_GENERIC netlink family.
+ *****************************************************************************/
+
+/*
+ * Commands.
+ * Valid TLVs of each command are:-
+ * TUNNEL_CREATE	- CONN_ID, pw_type, netns, ifname, ipinfo, udpinfo, udpcsum, vlanid
+ * TUNNEL_DELETE	- CONN_ID
+ * TUNNEL_MODIFY	- CONN_ID, udpcsum
+ * TUNNEL_GETSTATS	- CONN_ID, (stats)
+ * TUNNEL_GET		- CONN_ID, (...)
+ * SESSION_CREATE	- SESSION_ID, PW_TYPE, offset, data_seq, cookie, peer_cookie, offset, l2spec
+ * SESSION_DELETE	- SESSION_ID
+ * SESSION_MODIFY	- SESSION_ID, data_seq
+ * SESSION_GET		- SESSION_ID, (...)
+ * SESSION_GETSTATS	- SESSION_ID, (stats)
+ *
+ */
+enum {
+	L2TP_CMD_NOOP,
+	L2TP_CMD_TUNNEL_CREATE,
+	L2TP_CMD_TUNNEL_DELETE,
+	L2TP_CMD_TUNNEL_MODIFY,
+	L2TP_CMD_TUNNEL_GET,
+	L2TP_CMD_SESSION_CREATE,
+	L2TP_CMD_SESSION_DELETE,
+	L2TP_CMD_SESSION_MODIFY,
+	L2TP_CMD_SESSION_GET,
+	__L2TP_CMD_MAX,
+};
+
+#define L2TP_CMD_MAX			(__L2TP_CMD_MAX - 1)
+
+/*
+ * ATTR types defined for L2TP
+ */
+enum {
+	L2TP_ATTR_NONE,			/* no data */
+	L2TP_ATTR_PW_TYPE,		/* u16, enum l2tp_pwtype */
+	L2TP_ATTR_ENCAP_TYPE,		/* u16, enum l2tp_encap_type */
+	L2TP_ATTR_OFFSET,		/* u16 */
+	L2TP_ATTR_DATA_SEQ,		/* u16 */
+	L2TP_ATTR_L2SPEC_TYPE,		/* u8, enum l2tp_l2spec_type */
+	L2TP_ATTR_L2SPEC_LEN,		/* u8, enum l2tp_l2spec_type */
+	L2TP_ATTR_PROTO_VERSION,	/* u8 */
+	L2TP_ATTR_IFNAME,		/* string */
+	L2TP_ATTR_CONN_ID,		/* u32 */
+	L2TP_ATTR_PEER_CONN_ID,		/* u32 */
+	L2TP_ATTR_SESSION_ID,		/* u32 */
+	L2TP_ATTR_PEER_SESSION_ID,	/* u32 */
+	L2TP_ATTR_UDP_CSUM,		/* u8 */
+	L2TP_ATTR_VLAN_ID,		/* u16 */
+	L2TP_ATTR_COOKIE,		/* 0, 4 or 8 bytes */
+	L2TP_ATTR_PEER_COOKIE,		/* 0, 4 or 8 bytes */
+	L2TP_ATTR_DEBUG,		/* u32 */
+	L2TP_ATTR_RECV_SEQ,		/* u8 */
+	L2TP_ATTR_SEND_SEQ,		/* u8 */
+	L2TP_ATTR_LNS_MODE,		/* u8 */
+	L2TP_ATTR_USING_IPSEC,		/* u8 */
+	L2TP_ATTR_RECV_TIMEOUT,		/* msec */
+	L2TP_ATTR_FD,			/* int */
+	L2TP_ATTR_IP_SADDR,		/* u32 */
+	L2TP_ATTR_IP_DADDR,		/* u32 */
+	L2TP_ATTR_UDP_SPORT,		/* u16 */
+	L2TP_ATTR_UDP_DPORT,		/* u16 */
+	L2TP_ATTR_MTU,			/* u16 */
+	L2TP_ATTR_MRU,			/* u16 */
+	L2TP_ATTR_STATS,		/* nested */
+	__L2TP_ATTR_MAX,
+};
+
+#define L2TP_ATTR_MAX			(__L2TP_ATTR_MAX - 1)
+
+/* Nested in L2TP_ATTR_STATS */
+enum {
+	L2TP_ATTR_STATS_NONE,		/* no data */
+	L2TP_ATTR_TX_PACKETS,		/* u64 */
+	L2TP_ATTR_TX_BYTES,		/* u64 */
+	L2TP_ATTR_TX_ERRORS,		/* u64 */
+	L2TP_ATTR_RX_PACKETS,		/* u64 */
+	L2TP_ATTR_RX_BYTES,		/* u64 */
+	L2TP_ATTR_RX_SEQ_DISCARDS,	/* u64 */
+	L2TP_ATTR_RX_OOS_PACKETS,	/* u64 */
+	L2TP_ATTR_RX_ERRORS,		/* u64 */
+	__L2TP_ATTR_STATS_MAX,
+};
+
+#define L2TP_ATTR_STATS_MAX		(__L2TP_ATTR_STATS_MAX - 1)
+
+enum l2tp_pwtype {
+	L2TP_PWTYPE_NONE = 0x0000,
+	L2TP_PWTYPE_ETH_VLAN = 0x0004,
+	L2TP_PWTYPE_ETH = 0x0005,
+	L2TP_PWTYPE_PPP = 0x0007,
+	L2TP_PWTYPE_PPP_AC = 0x0008,
+	L2TP_PWTYPE_IP = 0x000b,
+	__L2TP_PWTYPE_MAX
+};
+
+enum l2tp_l2spec_type {
+	L2TP_L2SPECTYPE_NONE,
+	L2TP_L2SPECTYPE_DEFAULT,
+};
+
+enum l2tp_encap_type {
+	L2TP_ENCAPTYPE_UDP,
+	L2TP_ENCAPTYPE_IP,
+};
+
+enum l2tp_seqmode {
+	L2TP_SEQ_NONE = 0,
+	L2TP_SEQ_IP = 1,
+	L2TP_SEQ_ALL = 2,
+};
+
+/*
+ * NETLINK_GENERIC related info
+ */
+#define L2TP_GENL_NAME		"l2tp"
+#define L2TP_GENL_VERSION	0x1
+
+#endif
diff --git a/include/linux/lapb.h b/include/linux/lapb.h
new file mode 100644
index 00000000..873c1eb6
--- /dev/null
+++ b/include/linux/lapb.h
@@ -0,0 +1,57 @@
+/*
+ * These are the public elements of the Linux LAPB module.
+ */
+
+#ifndef	LAPB_KERNEL_H
+#define	LAPB_KERNEL_H
+
+#define	LAPB_OK			0
+#define	LAPB_BADTOKEN		1
+#define	LAPB_INVALUE		2
+#define	LAPB_CONNECTED		3
+#define	LAPB_NOTCONNECTED	4
+#define	LAPB_REFUSED		5
+#define	LAPB_TIMEDOUT		6
+#define	LAPB_NOMEM		7
+
+#define	LAPB_STANDARD		0x00
+#define	LAPB_EXTENDED		0x01
+
+#define	LAPB_SLP		0x00
+#define	LAPB_MLP		0x02
+
+#define	LAPB_DTE		0x00
+#define	LAPB_DCE		0x04
+
+struct lapb_register_struct {
+	void (*connect_confirmation)(struct net_device *dev, int reason);
+	void (*connect_indication)(struct net_device *dev, int reason);
+	void (*disconnect_confirmation)(struct net_device *dev, int reason);
+	void (*disconnect_indication)(struct net_device *dev, int reason);
+	int  (*data_indication)(struct net_device *dev, struct sk_buff *skb);
+	void (*data_transmit)(struct net_device *dev, struct sk_buff *skb);
+};
+
+struct lapb_parms_struct {
+	unsigned int t1;
+	unsigned int t1timer;
+	unsigned int t2;
+	unsigned int t2timer;
+	unsigned int n2;
+	unsigned int n2count;
+	unsigned int window;
+	unsigned int state;
+	unsigned int mode;
+};
+
+extern int lapb_register(struct net_device *dev,
+			 const struct lapb_register_struct *callbacks);
+extern int lapb_unregister(struct net_device *dev);
+extern int lapb_getparms(struct net_device *dev, struct lapb_parms_struct *parms);
+extern int lapb_setparms(struct net_device *dev, struct lapb_parms_struct *parms);
+extern int lapb_connect_request(struct net_device *dev);
+extern int lapb_disconnect_request(struct net_device *dev);
+extern int lapb_data_request(struct net_device *dev, struct sk_buff *skb);
+extern int lapb_data_received(struct net_device *dev, struct sk_buff *skb);
+
+#endif
diff --git a/include/linux/latencytop.h b/include/linux/latencytop.h
new file mode 100644
index 00000000..e23121f9
--- /dev/null
+++ b/include/linux/latencytop.h
@@ -0,0 +1,53 @@
+/*
+ * latencytop.h: Infrastructure for displaying latency
+ *
+ * (C) Copyright 2008 Intel Corporation
+ * Author: Arjan van de Ven <arjan@linux.intel.com>
+ *
+ */
+
+#ifndef _INCLUDE_GUARD_LATENCYTOP_H_
+#define _INCLUDE_GUARD_LATENCYTOP_H_
+
+#include <linux/compiler.h>
+struct task_struct;
+
+#ifdef CONFIG_LATENCYTOP
+
+#define LT_SAVECOUNT		32
+#define LT_BACKTRACEDEPTH	12
+
+struct latency_record {
+	unsigned long	backtrace[LT_BACKTRACEDEPTH];
+	unsigned int	count;
+	unsigned long	time;
+	unsigned long	max;
+};
+
+
+
+extern int latencytop_enabled;
+void __account_scheduler_latency(struct task_struct *task, int usecs, int inter);
+static inline void
+account_scheduler_latency(struct task_struct *task, int usecs, int inter)
+{
+	if (unlikely(latencytop_enabled))
+		__account_scheduler_latency(task, usecs, inter);
+}
+
+void clear_all_latency_tracing(struct task_struct *p);
+
+#else
+
+static inline void
+account_scheduler_latency(struct task_struct *task, int usecs, int inter)
+{
+}
+
+static inline void clear_all_latency_tracing(struct task_struct *p)
+{
+}
+
+#endif
+
+#endif
diff --git a/include/linux/lcd.h b/include/linux/lcd.h
new file mode 100644
index 00000000..8877123f
--- /dev/null
+++ b/include/linux/lcd.h
@@ -0,0 +1,115 @@
+/*
+ * LCD Lowlevel Control Abstraction
+ *
+ * Copyright (C) 2003,2004 Hewlett-Packard Company
+ *
+ */
+
+#ifndef _LINUX_LCD_H
+#define _LINUX_LCD_H
+
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/notifier.h>
+#include <linux/fb.h>
+
+/* Notes on locking:
+ *
+ * lcd_device->ops_lock is an internal backlight lock protecting the ops
+ * field and no code outside the core should need to touch it.
+ *
+ * Access to set_power() is serialised by the update_lock mutex since
+ * most drivers seem to need this and historically get it wrong.
+ *
+ * Most drivers don't need locking on their get_power() method.
+ * If yours does, you need to implement it in the driver. You can use the
+ * update_lock mutex if appropriate.
+ *
+ * Any other use of the locks below is probably wrong.
+ */
+
+struct lcd_device;
+struct fb_info;
+
+struct lcd_properties {
+	/* The maximum value for contrast (read-only) */
+	int max_contrast;
+};
+
+struct lcd_ops {
+	/* Get the LCD panel power status (0: full on, 1..3: controller
+	   power on, flat panel power off, 4: full off), see FB_BLANK_XXX */
+	int (*get_power)(struct lcd_device *);
+	/* Enable or disable power to the LCD (0: on; 4: off, see FB_BLANK_XXX) */
+	int (*set_power)(struct lcd_device *, int power);
+	/* Get the current contrast setting (0-max_contrast) */
+	int (*get_contrast)(struct lcd_device *);
+	/* Set LCD panel contrast */
+        int (*set_contrast)(struct lcd_device *, int contrast);
+	/* Set LCD panel mode (resolutions ...) */
+	int (*set_mode)(struct lcd_device *, struct fb_videomode *);
+	/* Check if given framebuffer device is the one LCD is bound to;
+	   return 0 if not, !=0 if it is. If NULL, lcd always matches the fb. */
+	int (*check_fb)(struct lcd_device *, struct fb_info *);
+};
+
+struct lcd_device {
+	struct lcd_properties props;
+	/* This protects the 'ops' field. If 'ops' is NULL, the driver that
+	   registered this device has been unloaded, and if class_get_devdata()
+	   points to something in the body of that driver, it is also invalid. */
+	struct mutex ops_lock;
+	/* If this is NULL, the backing module is unloaded */
+	struct lcd_ops *ops;
+	/* Serialise access to set_power method */
+	struct mutex update_lock;
+	/* The framebuffer notifier block */
+	struct notifier_block fb_notif;
+
+	struct device dev;
+};
+
+struct lcd_platform_data {
+	/* reset lcd panel device. */
+	int (*reset)(struct lcd_device *ld);
+	/* on or off to lcd panel. if 'enable' is 0 then
+	   lcd power off and 1, lcd power on. */
+	int (*power_on)(struct lcd_device *ld, int enable);
+
+	/* it indicates whether lcd panel was enabled
+	   from bootloader or not. */
+	int lcd_enabled;
+	/* it means delay for stable time when it becomes low to high
+	   or high to low that is dependent on whether reset gpio is
+	   low active or high active. */
+	unsigned int reset_delay;
+	/* stable time needing to become lcd power on. */
+	unsigned int power_on_delay;
+	/* stable time needing to become lcd power off. */
+	unsigned int power_off_delay;
+
+	/* it could be used for any purpose. */
+	void *pdata;
+};
+
+static inline void lcd_set_power(struct lcd_device *ld, int power)
+{
+	mutex_lock(&ld->update_lock);
+	if (ld->ops && ld->ops->set_power)
+		ld->ops->set_power(ld, power);
+	mutex_unlock(&ld->update_lock);
+}
+
+extern struct lcd_device *lcd_device_register(const char *name,
+	struct device *parent, void *devdata, struct lcd_ops *ops);
+extern void lcd_device_unregister(struct lcd_device *ld);
+
+#define to_lcd_device(obj) container_of(obj, struct lcd_device, dev)
+
+static inline void * lcd_get_data(struct lcd_device *ld_dev)
+{
+	return dev_get_drvdata(&ld_dev->dev);
+}
+
+
+#endif
diff --git a/include/linux/lcm.h b/include/linux/lcm.h
new file mode 100644
index 00000000..7bf01d77
--- /dev/null
+++ b/include/linux/lcm.h
@@ -0,0 +1,8 @@
+#ifndef _LCM_H
+#define _LCM_H
+
+#include <linux/compiler.h>
+
+unsigned long lcm(unsigned long a, unsigned long b) __attribute_const__;
+
+#endif /* _LCM_H */
diff --git a/include/linux/led-lm3530.h b/include/linux/led-lm3530.h
new file mode 100644
index 00000000..eeae6e74
--- /dev/null
+++ b/include/linux/led-lm3530.h
@@ -0,0 +1,121 @@
+/*
+ * Copyright (C) 2011 ST-Ericsson SA.
+ * Copyright (C) 2009 Motorola, Inc.
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Simple driver for National Semiconductor LM35330 Backlight driver chip
+ *
+ * Author: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com>
+ * based on leds-lm3530.c by Dan Murphy <D.Murphy@motorola.com>
+ */
+
+#ifndef _LINUX_LED_LM3530_H__
+#define _LINUX_LED_LM3530_H__
+
+#define LM3530_FS_CURR_5mA		(0) /* Full Scale Current */
+#define LM3530_FS_CURR_8mA		(1)
+#define LM3530_FS_CURR_12mA		(2)
+#define LM3530_FS_CURR_15mA		(3)
+#define LM3530_FS_CURR_19mA		(4)
+#define LM3530_FS_CURR_22mA		(5)
+#define LM3530_FS_CURR_26mA		(6)
+#define LM3530_FS_CURR_29mA		(7)
+
+#define LM3530_ALS_AVRG_TIME_32ms	(0) /* ALS Averaging Time */
+#define LM3530_ALS_AVRG_TIME_64ms	(1)
+#define LM3530_ALS_AVRG_TIME_128ms	(2)
+#define LM3530_ALS_AVRG_TIME_256ms	(3)
+#define LM3530_ALS_AVRG_TIME_512ms	(4)
+#define LM3530_ALS_AVRG_TIME_1024ms	(5)
+#define LM3530_ALS_AVRG_TIME_2048ms	(6)
+#define LM3530_ALS_AVRG_TIME_4096ms	(7)
+
+#define LM3530_RAMP_TIME_1ms		(0) /* Brigtness Ramp Time */
+#define LM3530_RAMP_TIME_130ms		(1) /* Max to 0 and vice versa */
+#define LM3530_RAMP_TIME_260ms		(2)
+#define LM3530_RAMP_TIME_520ms		(3)
+#define LM3530_RAMP_TIME_1s		(4)
+#define LM3530_RAMP_TIME_2s		(5)
+#define LM3530_RAMP_TIME_4s		(6)
+#define LM3530_RAMP_TIME_8s		(7)
+
+/* ALS Resistor Select */
+#define LM3530_ALS_IMPD_Z		(0x00) /* ALS Impedance */
+#define LM3530_ALS_IMPD_13_53kOhm	(0x01)
+#define LM3530_ALS_IMPD_9_01kOhm	(0x02)
+#define LM3530_ALS_IMPD_5_41kOhm	(0x03)
+#define LM3530_ALS_IMPD_2_27kOhm	(0x04)
+#define LM3530_ALS_IMPD_1_94kOhm	(0x05)
+#define LM3530_ALS_IMPD_1_81kOhm	(0x06)
+#define LM3530_ALS_IMPD_1_6kOhm		(0x07)
+#define LM3530_ALS_IMPD_1_138kOhm	(0x08)
+#define LM3530_ALS_IMPD_1_05kOhm	(0x09)
+#define LM3530_ALS_IMPD_1_011kOhm	(0x0A)
+#define LM3530_ALS_IMPD_941Ohm		(0x0B)
+#define LM3530_ALS_IMPD_759Ohm		(0x0C)
+#define LM3530_ALS_IMPD_719Ohm		(0x0D)
+#define LM3530_ALS_IMPD_700Ohm		(0x0E)
+#define LM3530_ALS_IMPD_667Ohm		(0x0F)
+
+enum lm3530_mode {
+	LM3530_BL_MODE_MANUAL = 0,	/* "man" */
+	LM3530_BL_MODE_ALS,		/* "als" */
+	LM3530_BL_MODE_PWM,		/* "pwm" */
+};
+
+/* ALS input select */
+enum lm3530_als_mode {
+	LM3530_INPUT_AVRG = 0,	/* ALS1 and ALS2 input average */
+	LM3530_INPUT_ALS1,	/* ALS1 Input */
+	LM3530_INPUT_ALS2,	/* ALS2 Input */
+	LM3530_INPUT_CEIL,	/* Max of ALS1 and ALS2 */
+};
+
+/* PWM Platform Specific Data */
+struct lm3530_pwm_data {
+	void (*pwm_set_intensity) (int brightness, int max_brightness);
+	int (*pwm_get_intensity) (int max_brightness);
+};
+
+/**
+ * struct lm3530_platform_data
+ * @mode: mode of operation i.e. Manual, ALS or PWM
+ * @als_input_mode: select source of ALS input - ALS1/2 or average
+ * @max_current: full scale LED current
+ * @pwm_pol_hi: PWM input polarity - active high/active low
+ * @als_avrg_time: ALS input averaging time
+ * @brt_ramp_law: brightness mapping mode - exponential/linear
+ * @brt_ramp_fall: rate of fall of led current
+ * @brt_ramp_rise: rate of rise of led current
+ * @als1_resistor_sel: internal resistance from ALS1 input to ground
+ * @als2_resistor_sel: internal resistance from ALS2 input to ground
+ * @als_vmin: als input voltage calibrated for max brightness in mV
+ * @als_vmax: als input voltage calibrated for min brightness in mV
+ * @brt_val: brightness value (0-255)
+ * @pwm_data: PWM control functions (only valid when the mode is PWM)
+ */
+struct lm3530_platform_data {
+	enum lm3530_mode mode;
+	enum lm3530_als_mode als_input_mode;
+
+	u8 max_current;
+	bool pwm_pol_hi;
+	u8 als_avrg_time;
+
+	bool brt_ramp_law;
+	u8 brt_ramp_fall;
+	u8 brt_ramp_rise;
+
+	u8 als1_resistor_sel;
+	u8 als2_resistor_sel;
+
+	u32 als_vmin;
+	u32 als_vmax;
+
+	u8 brt_val;
+
+	struct lm3530_pwm_data pwm_data;
+};
+
+#endif	/* _LINUX_LED_LM3530_H__ */
diff --git a/include/linux/leds-bd2802.h b/include/linux/leds-bd2802.h
new file mode 100644
index 00000000..42f854a1
--- /dev/null
+++ b/include/linux/leds-bd2802.h
@@ -0,0 +1,26 @@
+/*
+ * leds-bd2802.h - RGB LED Driver
+ *
+ * Copyright (C) 2009 Samsung Electronics
+ * Kim Kyuwon <q1.kim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Datasheet: http://www.rohm.com/products/databook/driver/pdf/bd2802gu-e.pdf
+ *
+ */
+#ifndef _LEDS_BD2802_H_
+#define _LEDS_BD2802_H_
+
+struct bd2802_led_platform_data{
+	int	reset_gpio;
+	u8	rgb_time;
+};
+
+#define RGB_TIME(slopedown, slopeup, waveform) \
+	((slopedown) << 6 | (slopeup) << 4 | (waveform))
+
+#endif /* _LEDS_BD2802_H_ */
+
diff --git a/include/linux/leds-lp3944.h b/include/linux/leds-lp3944.h
new file mode 100644
index 00000000..2618aa90
--- /dev/null
+++ b/include/linux/leds-lp3944.h
@@ -0,0 +1,50 @@
+/*
+ * leds-lp3944.h - platform data structure for lp3944 led controller
+ *
+ * Copyright (C) 2009 Antonio Ospite <ospite@studenti.unina.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __LINUX_LEDS_LP3944_H
+#define __LINUX_LEDS_LP3944_H
+
+#define LP3944_LED0 0
+#define LP3944_LED1 1
+#define LP3944_LED2 2
+#define LP3944_LED3 3
+#define LP3944_LED4 4
+#define LP3944_LED5 5
+#define LP3944_LED6 6
+#define LP3944_LED7 7
+#define LP3944_LEDS_MAX 8
+
+#define LP3944_LED_STATUS_MASK	0x03
+enum lp3944_status {
+	LP3944_LED_STATUS_OFF  = 0x0,
+	LP3944_LED_STATUS_ON   = 0x1,
+	LP3944_LED_STATUS_DIM0 = 0x2,
+	LP3944_LED_STATUS_DIM1 = 0x3
+};
+
+enum lp3944_type {
+	LP3944_LED_TYPE_NONE,
+	LP3944_LED_TYPE_LED,
+	LP3944_LED_TYPE_LED_INVERTED,
+};
+
+struct lp3944_led {
+	char *name;
+	enum lp3944_type type;
+	enum lp3944_status status;
+};
+
+struct lp3944_platform_data {
+	struct lp3944_led leds[LP3944_LEDS_MAX];
+	u8 leds_size;
+};
+
+#endif /* __LINUX_LEDS_LP3944_H */
diff --git a/include/linux/leds-lp5521.h b/include/linux/leds-lp5521.h
new file mode 100644
index 00000000..3f071ec0
--- /dev/null
+++ b/include/linux/leds-lp5521.h
@@ -0,0 +1,73 @@
+/*
+ * LP5521 LED chip driver.
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __LINUX_LP5521_H
+#define __LINUX_LP5521_H
+
+/* See Documentation/leds/leds-lp5521.txt */
+
+struct lp5521_led_config {
+	char		*name;
+	u8		chan_nr;
+	u8		led_current; /* mA x10, 0 if led is not connected */
+	u8		max_current;
+};
+
+struct lp5521_led_pattern {
+	u8 *r;
+	u8 *g;
+	u8 *b;
+	u8 size_r;
+	u8 size_g;
+	u8 size_b;
+};
+
+#define LP5521_CLOCK_AUTO	0
+#define LP5521_CLOCK_INT	1
+#define LP5521_CLOCK_EXT	2
+
+/* Bits in CONFIG register */
+#define LP5521_PWM_HF			0x40	/* PWM: 0 = 256Hz, 1 = 558Hz */
+#define LP5521_PWRSAVE_EN		0x20	/* 1 = Power save mode */
+#define LP5521_CP_MODE_OFF		0	/* Charge pump (CP) off */
+#define LP5521_CP_MODE_BYPASS		8	/* CP forced to bypass mode */
+#define LP5521_CP_MODE_1X5		0x10	/* CP forced to 1.5x mode */
+#define LP5521_CP_MODE_AUTO		0x18	/* Automatic mode selection */
+#define LP5521_R_TO_BATT		4	/* R out: 0 = CP, 1 = Vbat */
+#define LP5521_CLK_SRC_EXT		0	/* Ext-clk source (CLK_32K) */
+#define LP5521_CLK_INT			1	/* Internal clock */
+#define LP5521_CLK_AUTO			2	/* Automatic clock selection */
+
+struct lp5521_platform_data {
+	struct lp5521_led_config *led_config;
+	u8	num_channels;
+	u8	clock_mode;
+	int	(*setup_resources)(void);
+	void	(*release_resources)(void);
+	void	(*enable)(bool state);
+	const char *label;
+	u8	update_config;
+	struct lp5521_led_pattern *patterns;
+	int num_patterns;
+};
+
+#endif /* __LINUX_LP5521_H */
diff --git a/include/linux/leds-lp5523.h b/include/linux/leds-lp5523.h
new file mode 100644
index 00000000..2694289b
--- /dev/null
+++ b/include/linux/leds-lp5523.h
@@ -0,0 +1,48 @@
+/*
+ * LP5523 LED Driver
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __LINUX_LP5523_H
+#define __LINUX_LP5523_H
+
+/* See Documentation/leds/leds-lp5523.txt */
+
+struct lp5523_led_config {
+	u8		chan_nr;
+	u8		led_current; /* mA x10, 0 if led is not connected */
+	u8		max_current;
+};
+
+#define LP5523_CLOCK_AUTO	0
+#define LP5523_CLOCK_INT	1
+#define LP5523_CLOCK_EXT	2
+
+struct lp5523_platform_data {
+	struct lp5523_led_config *led_config;
+	u8	num_channels;
+	u8	clock_mode;
+	int	(*setup_resources)(void);
+	void	(*release_resources)(void);
+	void	(*enable)(bool state);
+	const	char *label;
+};
+
+#endif /* __LINUX_LP5523_H */
diff --git a/include/linux/leds-pca9532.h b/include/linux/leds-pca9532.h
new file mode 100644
index 00000000..b8d6fffe
--- /dev/null
+++ b/include/linux/leds-pca9532.h
@@ -0,0 +1,48 @@
+/*
+ * pca9532.h - platform data structure for pca9532 led controller
+ *
+ * Copyright (C) 2008 Riku Voipio <riku.voipio@movial.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * Datasheet: http://www.nxp.com/acrobat/datasheets/PCA9532_3.pdf
+ *
+ */
+
+#ifndef __LINUX_PCA9532_H
+#define __LINUX_PCA9532_H
+
+#include <linux/leds.h>
+#include <linux/workqueue.h>
+
+enum pca9532_state {
+	PCA9532_OFF  = 0x0,
+	PCA9532_ON   = 0x1,
+	PCA9532_PWM0 = 0x2,
+	PCA9532_PWM1 = 0x3
+};
+
+enum pca9532_type { PCA9532_TYPE_NONE, PCA9532_TYPE_LED,
+	PCA9532_TYPE_N2100_BEEP, PCA9532_TYPE_GPIO };
+
+struct pca9532_led {
+	u8 id;
+	struct i2c_client *client;
+	char *name;
+	struct led_classdev ldev;
+	struct work_struct work;
+	enum pca9532_type type;
+	enum pca9532_state state;
+};
+
+struct pca9532_platform_data {
+	struct pca9532_led leds[16];
+	u8 pwm[2];
+	u8 psc[2];
+	int gpio_base;
+};
+
+#endif /* __LINUX_PCA9532_H */
+
diff --git a/include/linux/leds-regulator.h b/include/linux/leds-regulator.h
new file mode 100644
index 00000000..e2337a8c
--- /dev/null
+++ b/include/linux/leds-regulator.h
@@ -0,0 +1,46 @@
+/*
+ * leds-regulator.h - platform data structure for regulator driven LEDs.
+ *
+ * Copyright (C) 2009 Antonio Ospite <ospite@studenti.unina.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __LINUX_LEDS_REGULATOR_H
+#define __LINUX_LEDS_REGULATOR_H
+
+/*
+ * Use "vled" as supply id when declaring the regulator consumer:
+ *
+ * static struct regulator_consumer_supply pcap_regulator_VVIB_consumers [] = {
+ * 	{ .dev_name = "leds-regulator.0", .supply = "vled" },
+ * };
+ *
+ * If you have several regulator driven LEDs, you can append a numerical id to
+ * .dev_name as done above, and use the same id when declaring the platform
+ * device:
+ *
+ * static struct led_regulator_platform_data a780_vibrator_data = {
+ * 	.name   = "a780::vibrator",
+ * };
+ *
+ * static struct platform_device a780_vibrator = {
+ * 	.name = "leds-regulator",
+ * 	.id   = 0,
+ * 	.dev  = {
+ * 		.platform_data = &a780_vibrator_data,
+ * 	},
+ * };
+ */
+
+#include <linux/leds.h>
+
+struct led_regulator_platform_data {
+	char *name;                     /* LED name as expected by LED class */
+	enum led_brightness brightness; /* initial brightness value */
+};
+
+#endif /* __LINUX_LEDS_REGULATOR_H */
diff --git a/include/linux/leds-tca6507.h b/include/linux/leds-tca6507.h
new file mode 100644
index 00000000..dcabf4fa
--- /dev/null
+++ b/include/linux/leds-tca6507.h
@@ -0,0 +1,34 @@
+/*
+ * TCA6507 LED chip driver.
+ *
+ * Copyright (C) 2011 Neil Brown <neil@brown.name>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __LINUX_TCA6507_H
+#define __LINUX_TCA6507_H
+#include <linux/leds.h>
+
+struct tca6507_platform_data {
+	struct led_platform_data leds;
+#ifdef CONFIG_GPIOLIB
+	int gpio_base;
+	void (*setup)(unsigned gpio_base, unsigned ngpio);
+#endif
+};
+
+#define	TCA6507_MAKE_GPIO 1
+#endif /* __LINUX_TCA6507_H*/
diff --git a/include/linux/leds.h b/include/linux/leds.h
new file mode 100644
index 00000000..5884def1
--- /dev/null
+++ b/include/linux/leds.h
@@ -0,0 +1,213 @@
+/*
+ * Driver model for leds and led triggers
+ *
+ * Copyright (C) 2005 John Lenz <lenz@cs.wisc.edu>
+ * Copyright (C) 2005 Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __LINUX_LEDS_H_INCLUDED
+#define __LINUX_LEDS_H_INCLUDED
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/rwsem.h>
+#include <linux/timer.h>
+
+struct device;
+/*
+ * LED Core
+ */
+
+enum led_brightness {
+	LED_OFF		= 0,
+	LED_HALF	= 127,
+	LED_FULL	= 255,
+};
+
+struct led_classdev {
+	const char		*name;
+	int			 brightness;
+	int			 max_brightness;
+	int			 flags;
+
+	/* Lower 16 bits reflect status */
+#define LED_SUSPENDED		(1 << 0)
+	/* Upper 16 bits reflect control information */
+#define LED_CORE_SUSPENDRESUME	(1 << 16)
+
+	/* Set LED brightness level */
+	/* Must not sleep, use a workqueue if needed */
+	void		(*brightness_set)(struct led_classdev *led_cdev,
+					  enum led_brightness brightness);
+	/* Get LED brightness level */
+	enum led_brightness (*brightness_get)(struct led_classdev *led_cdev);
+
+	/*
+	 * Activate hardware accelerated blink, delays are in milliseconds
+	 * and if both are zero then a sensible default should be chosen.
+	 * The call should adjust the timings in that case and if it can't
+	 * match the values specified exactly.
+	 * Deactivate blinking again when the brightness is set to a fixed
+	 * value via the brightness_set() callback.
+	 */
+	int		(*blink_set)(struct led_classdev *led_cdev,
+				     unsigned long *delay_on,
+				     unsigned long *delay_off);
+
+	struct device		*dev;
+	struct list_head	 node;			/* LED Device list */
+	const char		*default_trigger;	/* Trigger to use */
+
+	unsigned long		 blink_delay_on, blink_delay_off;
+	struct timer_list	 blink_timer;
+	int			 blink_brightness;
+
+#ifdef CONFIG_LEDS_TRIGGERS
+	/* Protects the trigger data below */
+	struct rw_semaphore	 trigger_lock;
+
+	struct led_trigger	*trigger;
+	struct list_head	 trig_list;
+	void			*trigger_data;
+#endif
+};
+
+extern int led_classdev_register(struct device *parent,
+				 struct led_classdev *led_cdev);
+extern void led_classdev_unregister(struct led_classdev *led_cdev);
+extern void led_classdev_suspend(struct led_classdev *led_cdev);
+extern void led_classdev_resume(struct led_classdev *led_cdev);
+
+/**
+ * led_blink_set - set blinking with software fallback
+ * @led_cdev: the LED to start blinking
+ * @delay_on: the time it should be on (in ms)
+ * @delay_off: the time it should ble off (in ms)
+ *
+ * This function makes the LED blink, attempting to use the
+ * hardware acceleration if possible, but falling back to
+ * software blinking if there is no hardware blinking or if
+ * the LED refuses the passed values.
+ *
+ * Note that if software blinking is active, simply calling
+ * led_cdev->brightness_set() will not stop the blinking,
+ * use led_classdev_brightness_set() instead.
+ */
+extern void led_blink_set(struct led_classdev *led_cdev,
+			  unsigned long *delay_on,
+			  unsigned long *delay_off);
+/**
+ * led_brightness_set - set LED brightness
+ * @led_cdev: the LED to set
+ * @brightness: the brightness to set it to
+ *
+ * Set an LED's brightness, and, if necessary, cancel the
+ * software blink timer that implements blinking when the
+ * hardware doesn't.
+ */
+extern void led_brightness_set(struct led_classdev *led_cdev,
+			       enum led_brightness brightness);
+
+/*
+ * LED Triggers
+ */
+#ifdef CONFIG_LEDS_TRIGGERS
+
+#define TRIG_NAME_MAX 50
+
+struct led_trigger {
+	/* Trigger Properties */
+	const char	 *name;
+	void		(*activate)(struct led_classdev *led_cdev);
+	void		(*deactivate)(struct led_classdev *led_cdev);
+
+	/* LEDs under control by this trigger (for simple triggers) */
+	rwlock_t	  leddev_list_lock;
+	struct list_head  led_cdevs;
+
+	/* Link to next registered trigger */
+	struct list_head  next_trig;
+};
+
+/* Registration functions for complex triggers */
+extern int led_trigger_register(struct led_trigger *trigger);
+extern void led_trigger_unregister(struct led_trigger *trigger);
+
+/* Registration functions for simple triggers */
+#define DEFINE_LED_TRIGGER(x)		static struct led_trigger *x;
+#define DEFINE_LED_TRIGGER_GLOBAL(x)	struct led_trigger *x;
+extern void led_trigger_register_simple(const char *name,
+				struct led_trigger **trigger);
+extern void led_trigger_unregister_simple(struct led_trigger *trigger);
+extern void led_trigger_event(struct led_trigger *trigger,
+				enum led_brightness event);
+extern void led_trigger_blink(struct led_trigger *trigger,
+			      unsigned long *delay_on,
+			      unsigned long *delay_off);
+
+#else
+
+/* Triggers aren't active - null macros */
+#define DEFINE_LED_TRIGGER(x)
+#define DEFINE_LED_TRIGGER_GLOBAL(x)
+#define led_trigger_register_simple(x, y) do {} while(0)
+#define led_trigger_unregister_simple(x) do {} while(0)
+#define led_trigger_event(x, y) do {} while(0)
+
+#endif
+
+/* Trigger specific functions */
+#ifdef CONFIG_LEDS_TRIGGER_IDE_DISK
+extern void ledtrig_ide_activity(void);
+#else
+#define ledtrig_ide_activity() do {} while(0)
+#endif
+
+/*
+ * Generic LED platform data for describing LED names and default triggers.
+ */
+struct led_info {
+	const char	*name;
+	const char	*default_trigger;
+	int		flags;
+};
+
+struct led_platform_data {
+	int		num_leds;
+	struct led_info	*leds;
+};
+
+/* For the leds-gpio driver */
+struct gpio_led {
+	const char *name;
+	const char *default_trigger;
+	unsigned 	gpio;
+	unsigned	active_low : 1;
+	unsigned	retain_state_suspended : 1;
+	unsigned	default_state : 2;
+	/* default_state should be one of LEDS_GPIO_DEFSTATE_(ON|OFF|KEEP) */
+};
+#define LEDS_GPIO_DEFSTATE_OFF		0
+#define LEDS_GPIO_DEFSTATE_ON		1
+#define LEDS_GPIO_DEFSTATE_KEEP		2
+
+struct gpio_led_platform_data {
+	int 		num_leds;
+	const struct gpio_led *leds;
+
+#define GPIO_LED_NO_BLINK_LOW	0	/* No blink GPIO state low */
+#define GPIO_LED_NO_BLINK_HIGH	1	/* No blink GPIO state high */
+#define GPIO_LED_BLINK		2	/* Please, blink */
+	int		(*gpio_blink_set)(unsigned gpio, int state,
+					unsigned long *delay_on,
+					unsigned long *delay_off);
+};
+
+struct platform_device *gpio_led_register_device(
+		int id, const struct gpio_led_platform_data *pdata);
+
+#endif		/* __LINUX_LEDS_H_INCLUDED */
diff --git a/include/linux/leds_pwm.h b/include/linux/leds_pwm.h
new file mode 100644
index 00000000..33a07116
--- /dev/null
+++ b/include/linux/leds_pwm.h
@@ -0,0 +1,21 @@
+/*
+ * PWM LED driver data - see drivers/leds/leds-pwm.c
+ */
+#ifndef __LINUX_LEDS_PWM_H
+#define __LINUX_LEDS_PWM_H
+
+struct led_pwm {
+	const char	*name;
+	const char	*default_trigger;
+	unsigned	pwm_id;
+	u8 		active_low;
+	unsigned 	max_brightness;
+	unsigned	pwm_period_ns;
+};
+
+struct led_pwm_platform_data {
+	int			num_leds;
+	struct led_pwm	*leds;
+};
+
+#endif
diff --git a/include/linux/lglock.h b/include/linux/lglock.h
new file mode 100644
index 00000000..87f402cc
--- /dev/null
+++ b/include/linux/lglock.h
@@ -0,0 +1,200 @@
+/*
+ * Specialised local-global spinlock. Can only be declared as global variables
+ * to avoid overhead and keep things simple (and we don't want to start using
+ * these inside dynamically allocated structures).
+ *
+ * "local/global locks" (lglocks) can be used to:
+ *
+ * - Provide fast exclusive access to per-CPU data, with exclusive access to
+ *   another CPU's data allowed but possibly subject to contention, and to
+ *   provide very slow exclusive access to all per-CPU data.
+ * - Or to provide very fast and scalable read serialisation, and to provide
+ *   very slow exclusive serialisation of data (not necessarily per-CPU data).
+ *
+ * Brlocks are also implemented as a short-hand notation for the latter use
+ * case.
+ *
+ * Copyright 2009, 2010, Nick Piggin, Novell Inc.
+ */
+#ifndef __LINUX_LGLOCK_H
+#define __LINUX_LGLOCK_H
+
+#include <linux/spinlock.h>
+#include <linux/lockdep.h>
+#include <linux/percpu.h>
+#include <linux/cpu.h>
+
+/* can make br locks by using local lock for read side, global lock for write */
+#define br_lock_init(name)	name##_lock_init()
+#define br_read_lock(name)	name##_local_lock()
+#define br_read_unlock(name)	name##_local_unlock()
+#define br_write_lock(name)	name##_global_lock_online()
+#define br_write_unlock(name)	name##_global_unlock_online()
+
+#define DECLARE_BRLOCK(name)	DECLARE_LGLOCK(name)
+#define DEFINE_BRLOCK(name)	DEFINE_LGLOCK(name)
+
+
+#define lg_lock_init(name)	name##_lock_init()
+#define lg_local_lock(name)	name##_local_lock()
+#define lg_local_unlock(name)	name##_local_unlock()
+#define lg_local_lock_cpu(name, cpu)	name##_local_lock_cpu(cpu)
+#define lg_local_unlock_cpu(name, cpu)	name##_local_unlock_cpu(cpu)
+#define lg_global_lock(name)	name##_global_lock()
+#define lg_global_unlock(name)	name##_global_unlock()
+#define lg_global_lock_online(name) name##_global_lock_online()
+#define lg_global_unlock_online(name) name##_global_unlock_online()
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+#define LOCKDEP_INIT_MAP lockdep_init_map
+
+#define DEFINE_LGLOCK_LOCKDEP(name)					\
+ struct lock_class_key name##_lock_key;					\
+ struct lockdep_map name##_lock_dep_map;				\
+ EXPORT_SYMBOL(name##_lock_dep_map)
+
+#else
+#define LOCKDEP_INIT_MAP(a, b, c, d)
+
+#define DEFINE_LGLOCK_LOCKDEP(name)
+#endif
+
+
+#define DECLARE_LGLOCK(name)						\
+ extern void name##_lock_init(void);					\
+ extern void name##_local_lock(void);					\
+ extern void name##_local_unlock(void);					\
+ extern void name##_local_lock_cpu(int cpu);				\
+ extern void name##_local_unlock_cpu(int cpu);				\
+ extern void name##_global_lock(void);					\
+ extern void name##_global_unlock(void);				\
+ extern void name##_global_lock_online(void);				\
+ extern void name##_global_unlock_online(void);				\
+
+#define DEFINE_LGLOCK(name)						\
+									\
+ DEFINE_SPINLOCK(name##_cpu_lock);					\
+ cpumask_t name##_cpus __read_mostly;					\
+ DEFINE_PER_CPU(arch_spinlock_t, name##_lock);				\
+ DEFINE_LGLOCK_LOCKDEP(name);						\
+									\
+ static int								\
+ name##_lg_cpu_callback(struct notifier_block *nb,			\
+				unsigned long action, void *hcpu)	\
+ {									\
+	switch (action & ~CPU_TASKS_FROZEN) {				\
+	case CPU_UP_PREPARE:						\
+		spin_lock(&name##_cpu_lock);				\
+		cpu_set((unsigned long)hcpu, name##_cpus);		\
+		spin_unlock(&name##_cpu_lock);				\
+		break;							\
+	case CPU_UP_CANCELED: case CPU_DEAD:				\
+		spin_lock(&name##_cpu_lock);				\
+		cpu_clear((unsigned long)hcpu, name##_cpus);		\
+		spin_unlock(&name##_cpu_lock);				\
+	}								\
+	return NOTIFY_OK;						\
+ }									\
+ static struct notifier_block name##_lg_cpu_notifier = {		\
+	.notifier_call = name##_lg_cpu_callback,			\
+ };									\
+ void name##_lock_init(void) {						\
+	int i;								\
+	LOCKDEP_INIT_MAP(&name##_lock_dep_map, #name, &name##_lock_key, 0); \
+	for_each_possible_cpu(i) {					\
+		arch_spinlock_t *lock;					\
+		lock = &per_cpu(name##_lock, i);			\
+		*lock = (arch_spinlock_t)__ARCH_SPIN_LOCK_UNLOCKED;	\
+	}								\
+	register_hotcpu_notifier(&name##_lg_cpu_notifier);		\
+	get_online_cpus();						\
+	for_each_online_cpu(i)						\
+		cpu_set(i, name##_cpus);				\
+	put_online_cpus();						\
+ }									\
+ EXPORT_SYMBOL(name##_lock_init);					\
+									\
+ void name##_local_lock(void) {						\
+	arch_spinlock_t *lock;						\
+	preempt_disable();						\
+	rwlock_acquire_read(&name##_lock_dep_map, 0, 0, _THIS_IP_);	\
+	lock = &__get_cpu_var(name##_lock);				\
+	arch_spin_lock(lock);						\
+ }									\
+ EXPORT_SYMBOL(name##_local_lock);					\
+									\
+ void name##_local_unlock(void) {					\
+	arch_spinlock_t *lock;						\
+	rwlock_release(&name##_lock_dep_map, 1, _THIS_IP_);		\
+	lock = &__get_cpu_var(name##_lock);				\
+	arch_spin_unlock(lock);						\
+	preempt_enable();						\
+ }									\
+ EXPORT_SYMBOL(name##_local_unlock);					\
+									\
+ void name##_local_lock_cpu(int cpu) {					\
+	arch_spinlock_t *lock;						\
+	preempt_disable();						\
+	rwlock_acquire_read(&name##_lock_dep_map, 0, 0, _THIS_IP_);	\
+	lock = &per_cpu(name##_lock, cpu);				\
+	arch_spin_lock(lock);						\
+ }									\
+ EXPORT_SYMBOL(name##_local_lock_cpu);					\
+									\
+ void name##_local_unlock_cpu(int cpu) {				\
+	arch_spinlock_t *lock;						\
+	rwlock_release(&name##_lock_dep_map, 1, _THIS_IP_);		\
+	lock = &per_cpu(name##_lock, cpu);				\
+	arch_spin_unlock(lock);						\
+	preempt_enable();						\
+ }									\
+ EXPORT_SYMBOL(name##_local_unlock_cpu);				\
+									\
+ void name##_global_lock_online(void) {					\
+	int i;								\
+	spin_lock(&name##_cpu_lock);					\
+	rwlock_acquire(&name##_lock_dep_map, 0, 0, _RET_IP_);		\
+	for_each_cpu(i, &name##_cpus) {					\
+		arch_spinlock_t *lock;					\
+		lock = &per_cpu(name##_lock, i);			\
+		arch_spin_lock(lock);					\
+	}								\
+ }									\
+ EXPORT_SYMBOL(name##_global_lock_online);				\
+									\
+ void name##_global_unlock_online(void) {				\
+	int i;								\
+	rwlock_release(&name##_lock_dep_map, 1, _RET_IP_);		\
+	for_each_cpu(i, &name##_cpus) {					\
+		arch_spinlock_t *lock;					\
+		lock = &per_cpu(name##_lock, i);			\
+		arch_spin_unlock(lock);					\
+	}								\
+	spin_unlock(&name##_cpu_lock);					\
+ }									\
+ EXPORT_SYMBOL(name##_global_unlock_online);				\
+									\
+ void name##_global_lock(void) {					\
+	int i;								\
+	preempt_disable();						\
+	rwlock_acquire(&name##_lock_dep_map, 0, 0, _RET_IP_);		\
+	for_each_possible_cpu(i) {					\
+		arch_spinlock_t *lock;					\
+		lock = &per_cpu(name##_lock, i);			\
+		arch_spin_lock(lock);					\
+	}								\
+ }									\
+ EXPORT_SYMBOL(name##_global_lock);					\
+									\
+ void name##_global_unlock(void) {					\
+	int i;								\
+	rwlock_release(&name##_lock_dep_map, 1, _RET_IP_);		\
+	for_each_possible_cpu(i) {					\
+		arch_spinlock_t *lock;					\
+		lock = &per_cpu(name##_lock, i);			\
+		arch_spin_unlock(lock);					\
+	}								\
+	preempt_enable();						\
+ }									\
+ EXPORT_SYMBOL(name##_global_unlock);
+#endif
diff --git a/include/linux/lguest.h b/include/linux/lguest.h
new file mode 100644
index 00000000..9962c6bb
--- /dev/null
+++ b/include/linux/lguest.h
@@ -0,0 +1,73 @@
+/*
+ * Things the lguest guest needs to know.  Note: like all lguest interfaces,
+ * this is subject to wild and random change between versions.
+ */
+#ifndef _LINUX_LGUEST_H
+#define _LINUX_LGUEST_H
+
+#ifndef __ASSEMBLY__
+#include <linux/time.h>
+#include <asm/irq.h>
+#include <asm/lguest_hcall.h>
+
+#define LG_CLOCK_MIN_DELTA	100UL
+#define LG_CLOCK_MAX_DELTA	ULONG_MAX
+
+/*G:031
+ * The second method of communicating with the Host is to via "struct
+ * lguest_data".  Once the Guest's initialization hypercall tells the Host where
+ * this is, the Guest and Host both publish information in it.
+:*/
+struct lguest_data {
+	/*
+	 * 512 == enabled (same as eflags in normal hardware).  The Guest
+	 * changes interrupts so often that a hypercall is too slow.
+	 */
+	unsigned int irq_enabled;
+	/* Fine-grained interrupt disabling by the Guest */
+	DECLARE_BITMAP(blocked_interrupts, LGUEST_IRQS);
+
+	/*
+	 * The Host writes the virtual address of the last page fault here,
+	 * which saves the Guest a hypercall.  CR2 is the native register where
+	 * this address would normally be found.
+	 */
+	unsigned long cr2;
+
+	/* Wallclock time set by the Host. */
+	struct timespec time;
+
+	/*
+	 * Interrupt pending set by the Host.  The Guest should do a hypercall
+	 * if it re-enables interrupts and sees this set (to X86_EFLAGS_IF).
+	 */
+	int irq_pending;
+
+	/*
+	 * Async hypercall ring.  Instead of directly making hypercalls, we can
+	 * place them in here for processing the next time the Host wants.
+	 * This batching can be quite efficient.
+	 */
+
+	/* 0xFF == done (set by Host), 0 == pending (set by Guest). */
+	u8 hcall_status[LHCALL_RING_SIZE];
+	/* The actual registers for the hypercalls. */
+	struct hcall_args hcalls[LHCALL_RING_SIZE];
+
+/* Fields initialized by the Host at boot: */
+	/* Memory not to try to access */
+	unsigned long reserve_mem;
+	/* KHz for the TSC clock. */
+	u32 tsc_khz;
+
+/* Fields initialized by the Guest at boot: */
+	/* Instruction range to suppress interrupts even if enabled */
+	unsigned long noirq_start, noirq_end;
+	/* Address above which page tables are all identical. */
+	unsigned long kernel_address;
+	/* The vector to try to use for system calls (0x40 or 0x80). */
+	unsigned int syscall_vec;
+};
+extern struct lguest_data lguest_data;
+#endif /* __ASSEMBLY__ */
+#endif	/* _LINUX_LGUEST_H */
diff --git a/include/linux/lguest_launcher.h b/include/linux/lguest_launcher.h
new file mode 100644
index 00000000..495203ff
--- /dev/null
+++ b/include/linux/lguest_launcher.h
@@ -0,0 +1,73 @@
+#ifndef _LINUX_LGUEST_LAUNCHER
+#define _LINUX_LGUEST_LAUNCHER
+/* Everything the "lguest" userspace program needs to know. */
+#include <linux/types.h>
+
+/*D:010
+ * Drivers
+ *
+ * The Guest needs devices to do anything useful.  Since we don't let it touch
+ * real devices (think of the damage it could do!) we provide virtual devices.
+ * We could emulate a PCI bus with various devices on it, but that is a fairly
+ * complex burden for the Host and suboptimal for the Guest, so we have our own
+ * simple lguest bus and we use "virtio" drivers.  These drivers need a set of
+ * routines from us which will actually do the virtual I/O, but they handle all
+ * the net/block/console stuff themselves.  This means that if we want to add
+ * a new device, we simply need to write a new virtio driver and create support
+ * for it in the Launcher: this code won't need to change.
+ *
+ * Virtio devices are also used by kvm, so we can simply reuse their optimized
+ * device drivers.  And one day when everyone uses virtio, my plan will be
+ * complete.  Bwahahahah!
+ *
+ * Devices are described by a simplified ID, a status byte, and some "config"
+ * bytes which describe this device's configuration.  This is placed by the
+ * Launcher just above the top of physical memory:
+ */
+struct lguest_device_desc {
+	/* The device type: console, network, disk etc.  Type 0 terminates. */
+	__u8 type;
+	/* The number of virtqueues (first in config array) */
+	__u8 num_vq;
+	/*
+	 * The number of bytes of feature bits.  Multiply by 2: one for host
+	 * features and one for Guest acknowledgements.
+	 */
+	__u8 feature_len;
+	/* The number of bytes of the config array after virtqueues. */
+	__u8 config_len;
+	/* A status byte, written by the Guest. */
+	__u8 status;
+	__u8 config[0];
+};
+
+/*D:135
+ * This is how we expect the device configuration field for a virtqueue
+ * to be laid out in config space.
+ */
+struct lguest_vqconfig {
+	/* The number of entries in the virtio_ring */
+	__u16 num;
+	/* The interrupt we get when something happens. */
+	__u16 irq;
+	/* The page number of the virtio ring for this device. */
+	__u32 pfn;
+};
+/*:*/
+
+/* Write command first word is a request. */
+enum lguest_req
+{
+	LHREQ_INITIALIZE, /* + base, pfnlimit, start */
+	LHREQ_GETDMA, /* No longer used */
+	LHREQ_IRQ, /* + irq */
+	LHREQ_BREAK, /* No longer used */
+	LHREQ_EVENTFD, /* + address, fd. */
+};
+
+/*
+ * The alignment to use between consumer and producer parts of vring.
+ * x86 pagesize for historical reasons.
+ */
+#define LGUEST_VRING_ALIGN	4096
+#endif /* _LINUX_LGUEST_LAUNCHER */
diff --git a/include/linux/libata.h b/include/linux/libata.h
new file mode 100644
index 00000000..6e887c74
--- /dev/null
+++ b/include/linux/libata.h
@@ -0,0 +1,1786 @@
+/*
+ *  Copyright 2003-2005 Red Hat, Inc.  All rights reserved.
+ *  Copyright 2003-2005 Jeff Garzik
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ *  libata documentation is available via 'make {ps|pdf}docs',
+ *  as Documentation/DocBook/libata.*
+ *
+ */
+
+#ifndef __LINUX_LIBATA_H__
+#define __LINUX_LIBATA_H__
+
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/scatterlist.h>
+#include <linux/io.h>
+#include <linux/ata.h>
+#include <linux/workqueue.h>
+#include <scsi/scsi_host.h>
+#include <linux/acpi.h>
+#include <linux/cdrom.h>
+#include <linux/sched.h>
+
+/*
+ * Define if arch has non-standard setup.  This is a _PCI_ standard
+ * not a legacy or ISA standard.
+ */
+#ifdef CONFIG_ATA_NONSTANDARD
+#include <asm/libata-portmap.h>
+#else
+#include <asm-generic/libata-portmap.h>
+#endif
+
+/*
+ * compile-time options: to be removed as soon as all the drivers are
+ * converted to the new debugging mechanism
+ */
+#undef ATA_DEBUG		/* debugging output */
+#undef ATA_VERBOSE_DEBUG	/* yet more debugging output */
+#undef ATA_IRQ_TRAP		/* define to ack screaming irqs */
+#undef ATA_NDEBUG		/* define to disable quick runtime checks */
+
+
+/* note: prints function name for you */
+#ifdef ATA_DEBUG
+#define DPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
+#ifdef ATA_VERBOSE_DEBUG
+#define VPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
+#else
+#define VPRINTK(fmt, args...)
+#endif	/* ATA_VERBOSE_DEBUG */
+#else
+#define DPRINTK(fmt, args...)
+#define VPRINTK(fmt, args...)
+#endif	/* ATA_DEBUG */
+
+#define BPRINTK(fmt, args...) if (ap->flags & ATA_FLAG_DEBUGMSG) printk(KERN_ERR "%s: " fmt, __func__, ## args)
+
+#define ata_print_version_once(dev, version)			\
+({								\
+	static bool __print_once;				\
+								\
+	if (!__print_once) {					\
+		__print_once = true;				\
+		ata_print_version(dev, version);		\
+	}							\
+})
+
+/* NEW: debug levels */
+#define HAVE_LIBATA_MSG 1
+
+enum {
+	ATA_MSG_DRV	= 0x0001,
+	ATA_MSG_INFO	= 0x0002,
+	ATA_MSG_PROBE	= 0x0004,
+	ATA_MSG_WARN	= 0x0008,
+	ATA_MSG_MALLOC	= 0x0010,
+	ATA_MSG_CTL	= 0x0020,
+	ATA_MSG_INTR	= 0x0040,
+	ATA_MSG_ERR	= 0x0080,
+};
+
+#define ata_msg_drv(p)    ((p)->msg_enable & ATA_MSG_DRV)
+#define ata_msg_info(p)   ((p)->msg_enable & ATA_MSG_INFO)
+#define ata_msg_probe(p)  ((p)->msg_enable & ATA_MSG_PROBE)
+#define ata_msg_warn(p)   ((p)->msg_enable & ATA_MSG_WARN)
+#define ata_msg_malloc(p) ((p)->msg_enable & ATA_MSG_MALLOC)
+#define ata_msg_ctl(p)    ((p)->msg_enable & ATA_MSG_CTL)
+#define ata_msg_intr(p)   ((p)->msg_enable & ATA_MSG_INTR)
+#define ata_msg_err(p)    ((p)->msg_enable & ATA_MSG_ERR)
+
+static inline u32 ata_msg_init(int dval, int default_msg_enable_bits)
+{
+	if (dval < 0 || dval >= (sizeof(u32) * 8))
+		return default_msg_enable_bits; /* should be 0x1 - only driver info msgs */
+	if (!dval)
+		return 0;
+	return (1 << dval) - 1;
+}
+
+/* defines only for the constants which don't work well as enums */
+#define ATA_TAG_POISON		0xfafbfcfdU
+
+enum {
+	/* various global constants */
+	LIBATA_MAX_PRD		= ATA_MAX_PRD / 2,
+	LIBATA_DUMB_MAX_PRD	= ATA_MAX_PRD / 4,	/* Worst case */
+	ATA_DEF_QUEUE		= 1,
+	/* tag ATA_MAX_QUEUE - 1 is reserved for internal commands */
+	ATA_MAX_QUEUE		= 32,
+	ATA_TAG_INTERNAL	= ATA_MAX_QUEUE - 1,
+	ATA_SHORT_PAUSE		= 16,
+
+	ATAPI_MAX_DRAIN		= 16 << 10,
+
+	ATA_ALL_DEVICES		= (1 << ATA_MAX_DEVICES) - 1,
+
+	ATA_SHT_EMULATED	= 1,
+	ATA_SHT_CMD_PER_LUN	= 1,
+	ATA_SHT_THIS_ID		= -1,
+	ATA_SHT_USE_CLUSTERING	= 1,
+
+	/* struct ata_device stuff */
+	ATA_DFLAG_LBA		= (1 << 0), /* device supports LBA */
+	ATA_DFLAG_LBA48		= (1 << 1), /* device supports LBA48 */
+	ATA_DFLAG_CDB_INTR	= (1 << 2), /* device asserts INTRQ when ready for CDB */
+	ATA_DFLAG_NCQ		= (1 << 3), /* device supports NCQ */
+	ATA_DFLAG_FLUSH_EXT	= (1 << 4), /* do FLUSH_EXT instead of FLUSH */
+	ATA_DFLAG_ACPI_PENDING	= (1 << 5), /* ACPI resume action pending */
+	ATA_DFLAG_ACPI_FAILED	= (1 << 6), /* ACPI on devcfg has failed */
+	ATA_DFLAG_AN		= (1 << 7), /* AN configured */
+	ATA_DFLAG_DMADIR	= (1 << 10), /* device requires DMADIR */
+	ATA_DFLAG_CFG_MASK	= (1 << 12) - 1,
+
+	ATA_DFLAG_PIO		= (1 << 12), /* device limited to PIO mode */
+	ATA_DFLAG_NCQ_OFF	= (1 << 13), /* device limited to non-NCQ mode */
+	ATA_DFLAG_SLEEPING	= (1 << 15), /* device is sleeping */
+	ATA_DFLAG_DUBIOUS_XFER	= (1 << 16), /* data transfer not verified */
+	ATA_DFLAG_NO_UNLOAD	= (1 << 17), /* device doesn't support unload */
+	ATA_DFLAG_UNLOCK_HPA	= (1 << 18), /* unlock HPA */
+	ATA_DFLAG_INIT_MASK	= (1 << 24) - 1,
+
+	ATA_DFLAG_DETACH	= (1 << 24),
+	ATA_DFLAG_DETACHED	= (1 << 25),
+
+	ATA_DEV_UNKNOWN		= 0,	/* unknown device */
+	ATA_DEV_ATA		= 1,	/* ATA device */
+	ATA_DEV_ATA_UNSUP	= 2,	/* ATA device (unsupported) */
+	ATA_DEV_ATAPI		= 3,	/* ATAPI device */
+	ATA_DEV_ATAPI_UNSUP	= 4,	/* ATAPI device (unsupported) */
+	ATA_DEV_PMP		= 5,	/* SATA port multiplier */
+	ATA_DEV_PMP_UNSUP	= 6,	/* SATA port multiplier (unsupported) */
+	ATA_DEV_SEMB		= 7,	/* SEMB */
+	ATA_DEV_SEMB_UNSUP	= 8,	/* SEMB (unsupported) */
+	ATA_DEV_NONE		= 9,	/* no device */
+
+	/* struct ata_link flags */
+	ATA_LFLAG_NO_HRST	= (1 << 1), /* avoid hardreset */
+	ATA_LFLAG_NO_SRST	= (1 << 2), /* avoid softreset */
+	ATA_LFLAG_ASSUME_ATA	= (1 << 3), /* assume ATA class */
+	ATA_LFLAG_ASSUME_SEMB	= (1 << 4), /* assume SEMB class */
+	ATA_LFLAG_ASSUME_CLASS	= ATA_LFLAG_ASSUME_ATA | ATA_LFLAG_ASSUME_SEMB,
+	ATA_LFLAG_NO_RETRY	= (1 << 5), /* don't retry this link */
+	ATA_LFLAG_DISABLED	= (1 << 6), /* link is disabled */
+	ATA_LFLAG_SW_ACTIVITY	= (1 << 7), /* keep activity stats */
+	ATA_LFLAG_NO_LPM	= (1 << 8), /* disable LPM on this link */
+
+	/* struct ata_port flags */
+	ATA_FLAG_SLAVE_POSS	= (1 << 0), /* host supports slave dev */
+					    /* (doesn't imply presence) */
+	ATA_FLAG_SATA		= (1 << 1),
+	ATA_FLAG_NO_ATAPI	= (1 << 6), /* No ATAPI support */
+	ATA_FLAG_PIO_DMA	= (1 << 7), /* PIO cmds via DMA */
+	ATA_FLAG_PIO_LBA48	= (1 << 8), /* Host DMA engine is LBA28 only */
+	ATA_FLAG_PIO_POLLING	= (1 << 9), /* use polling PIO if LLD
+					     * doesn't handle PIO interrupts */
+	ATA_FLAG_NCQ		= (1 << 10), /* host supports NCQ */
+	ATA_FLAG_NO_POWEROFF_SPINDOWN = (1 << 11), /* don't spindown before poweroff */
+	ATA_FLAG_NO_HIBERNATE_SPINDOWN = (1 << 12), /* don't spindown before hibernation */
+	ATA_FLAG_DEBUGMSG	= (1 << 13),
+	ATA_FLAG_FPDMA_AA		= (1 << 14), /* driver supports Auto-Activate */
+	ATA_FLAG_IGN_SIMPLEX	= (1 << 15), /* ignore SIMPLEX */
+	ATA_FLAG_NO_IORDY	= (1 << 16), /* controller lacks iordy */
+	ATA_FLAG_ACPI_SATA	= (1 << 17), /* need native SATA ACPI layout */
+	ATA_FLAG_AN		= (1 << 18), /* controller supports AN */
+	ATA_FLAG_PMP		= (1 << 19), /* controller supports PMP */
+	ATA_FLAG_EM		= (1 << 21), /* driver supports enclosure
+					      * management */
+	ATA_FLAG_SW_ACTIVITY	= (1 << 22), /* driver supports sw activity
+					      * led */
+	ATA_FLAG_NO_DIPM	= (1 << 23), /* host not happy with DIPM */
+
+	/* bits 24:31 of ap->flags are reserved for LLD specific flags */
+
+
+	/* struct ata_port pflags */
+	ATA_PFLAG_EH_PENDING	= (1 << 0), /* EH pending */
+	ATA_PFLAG_EH_IN_PROGRESS = (1 << 1), /* EH in progress */
+	ATA_PFLAG_FROZEN	= (1 << 2), /* port is frozen */
+	ATA_PFLAG_RECOVERED	= (1 << 3), /* recovery action performed */
+	ATA_PFLAG_LOADING	= (1 << 4), /* boot/loading probe */
+	ATA_PFLAG_SCSI_HOTPLUG	= (1 << 6), /* SCSI hotplug scheduled */
+	ATA_PFLAG_INITIALIZING	= (1 << 7), /* being initialized, don't touch */
+	ATA_PFLAG_RESETTING	= (1 << 8), /* reset in progress */
+	ATA_PFLAG_UNLOADING	= (1 << 9), /* driver is being unloaded */
+	ATA_PFLAG_UNLOADED	= (1 << 10), /* driver is unloaded */
+
+	ATA_PFLAG_SUSPENDED	= (1 << 17), /* port is suspended (power) */
+	ATA_PFLAG_PM_PENDING	= (1 << 18), /* PM operation pending */
+	ATA_PFLAG_INIT_GTM_VALID = (1 << 19), /* initial gtm data valid */
+
+	ATA_PFLAG_PIO32		= (1 << 20),  /* 32bit PIO */
+	ATA_PFLAG_PIO32CHANGE	= (1 << 21),  /* 32bit PIO can be turned on/off */
+
+	/* struct ata_queued_cmd flags */
+	ATA_QCFLAG_ACTIVE	= (1 << 0), /* cmd not yet ack'd to scsi lyer */
+	ATA_QCFLAG_DMAMAP	= (1 << 1), /* SG table is DMA mapped */
+	ATA_QCFLAG_IO		= (1 << 3), /* standard IO command */
+	ATA_QCFLAG_RESULT_TF	= (1 << 4), /* result TF requested */
+	ATA_QCFLAG_CLEAR_EXCL	= (1 << 5), /* clear excl_link on completion */
+	ATA_QCFLAG_QUIET	= (1 << 6), /* don't report device error */
+	ATA_QCFLAG_RETRY	= (1 << 7), /* retry after failure */
+
+	ATA_QCFLAG_FAILED	= (1 << 16), /* cmd failed and is owned by EH */
+	ATA_QCFLAG_SENSE_VALID	= (1 << 17), /* sense data valid */
+	ATA_QCFLAG_EH_SCHEDULED = (1 << 18), /* EH scheduled (obsolete) */
+
+	/* host set flags */
+	ATA_HOST_SIMPLEX	= (1 << 0),	/* Host is simplex, one DMA channel per host only */
+	ATA_HOST_STARTED	= (1 << 1),	/* Host started */
+	ATA_HOST_PARALLEL_SCAN	= (1 << 2),	/* Ports on this host can be scanned in parallel */
+	ATA_HOST_IGNORE_ATA	= (1 << 3),	/* Ignore ATA devices on this host. */
+
+	/* bits 24:31 of host->flags are reserved for LLD specific flags */
+
+	/* various lengths of time */
+	ATA_TMOUT_BOOT		= 30000,	/* heuristic */
+	ATA_TMOUT_BOOT_QUICK	=  7000,	/* heuristic */
+	ATA_TMOUT_INTERNAL_QUICK = 5000,
+	ATA_TMOUT_MAX_PARK	= 30000,
+
+	/*
+	 * GoVault needs 2s and iVDR disk HHD424020F7SV00 800ms.  2s
+	 * is too much without parallel probing.  Use 2s if parallel
+	 * probing is available, 800ms otherwise.
+	 */
+	ATA_TMOUT_FF_WAIT_LONG	=  2000,
+	ATA_TMOUT_FF_WAIT	=   800,
+
+	/* Spec mandates to wait for ">= 2ms" before checking status
+	 * after reset.  We wait 150ms, because that was the magic
+	 * delay used for ATAPI devices in Hale Landis's ATADRVR, for
+	 * the period of time between when the ATA command register is
+	 * written, and then status is checked.  Because waiting for
+	 * "a while" before checking status is fine, post SRST, we
+	 * perform this magic delay here as well.
+	 *
+	 * Old drivers/ide uses the 2mS rule and then waits for ready.
+	 */
+	ATA_WAIT_AFTER_RESET	=  150,
+
+	/* If PMP is supported, we have to do follow-up SRST.  As some
+	 * PMPs don't send D2H Reg FIS after hardreset, LLDs are
+	 * advised to wait only for the following duration before
+	 * doing SRST.
+	 */
+	ATA_TMOUT_PMP_SRST_WAIT	= 5000,
+
+	/* ATA bus states */
+	BUS_UNKNOWN		= 0,
+	BUS_DMA			= 1,
+	BUS_IDLE		= 2,
+	BUS_NOINTR		= 3,
+	BUS_NODATA		= 4,
+	BUS_TIMER		= 5,
+	BUS_PIO			= 6,
+	BUS_EDD			= 7,
+	BUS_IDENTIFY		= 8,
+	BUS_PACKET		= 9,
+
+	/* SATA port states */
+	PORT_UNKNOWN		= 0,
+	PORT_ENABLED		= 1,
+	PORT_DISABLED		= 2,
+
+	/* encoding various smaller bitmaps into a single
+	 * unsigned long bitmap
+	 */
+	ATA_NR_PIO_MODES	= 7,
+	ATA_NR_MWDMA_MODES	= 5,
+	ATA_NR_UDMA_MODES	= 8,
+
+	ATA_SHIFT_PIO		= 0,
+	ATA_SHIFT_MWDMA		= ATA_SHIFT_PIO + ATA_NR_PIO_MODES,
+	ATA_SHIFT_UDMA		= ATA_SHIFT_MWDMA + ATA_NR_MWDMA_MODES,
+
+	/* size of buffer to pad xfers ending on unaligned boundaries */
+	ATA_DMA_PAD_SZ		= 4,
+
+	/* ering size */
+	ATA_ERING_SIZE		= 32,
+
+	/* return values for ->qc_defer */
+	ATA_DEFER_LINK		= 1,
+	ATA_DEFER_PORT		= 2,
+
+	/* desc_len for ata_eh_info and context */
+	ATA_EH_DESC_LEN		= 80,
+
+	/* reset / recovery action types */
+	ATA_EH_REVALIDATE	= (1 << 0),
+	ATA_EH_SOFTRESET	= (1 << 1), /* meaningful only in ->prereset */
+	ATA_EH_HARDRESET	= (1 << 2), /* meaningful only in ->prereset */
+	ATA_EH_RESET		= ATA_EH_SOFTRESET | ATA_EH_HARDRESET,
+	ATA_EH_ENABLE_LINK	= (1 << 3),
+	ATA_EH_PARK		= (1 << 5), /* unload heads and stop I/O */
+
+	ATA_EH_PERDEV_MASK	= ATA_EH_REVALIDATE | ATA_EH_PARK,
+	ATA_EH_ALL_ACTIONS	= ATA_EH_REVALIDATE | ATA_EH_RESET |
+				  ATA_EH_ENABLE_LINK,
+
+	/* ata_eh_info->flags */
+	ATA_EHI_HOTPLUGGED	= (1 << 0),  /* could have been hotplugged */
+	ATA_EHI_NO_AUTOPSY	= (1 << 2),  /* no autopsy */
+	ATA_EHI_QUIET		= (1 << 3),  /* be quiet */
+	ATA_EHI_NO_RECOVERY	= (1 << 4),  /* no recovery */
+
+	ATA_EHI_DID_SOFTRESET	= (1 << 16), /* already soft-reset this port */
+	ATA_EHI_DID_HARDRESET	= (1 << 17), /* already soft-reset this port */
+	ATA_EHI_PRINTINFO	= (1 << 18), /* print configuration info */
+	ATA_EHI_SETMODE		= (1 << 19), /* configure transfer mode */
+	ATA_EHI_POST_SETMODE	= (1 << 20), /* revalidating after setmode */
+
+	ATA_EHI_DID_RESET	= ATA_EHI_DID_SOFTRESET | ATA_EHI_DID_HARDRESET,
+
+	/* mask of flags to transfer *to* the slave link */
+	ATA_EHI_TO_SLAVE_MASK	= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET,
+
+	/* max tries if error condition is still set after ->error_handler */
+	ATA_EH_MAX_TRIES	= 5,
+
+	/* sometimes resuming a link requires several retries */
+	ATA_LINK_RESUME_TRIES	= 5,
+
+	/* how hard are we gonna try to probe/recover devices */
+	ATA_PROBE_MAX_TRIES	= 3,
+	ATA_EH_DEV_TRIES	= 3,
+	ATA_EH_PMP_TRIES	= 5,
+	ATA_EH_PMP_LINK_TRIES	= 3,
+
+	SATA_PMP_RW_TIMEOUT	= 3000,		/* PMP read/write timeout */
+
+	/* This should match the actual table size of
+	 * ata_eh_cmd_timeout_table in libata-eh.c.
+	 */
+	ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 6,
+
+	/* Horkage types. May be set by libata or controller on drives
+	   (some horkage may be drive/controller pair dependent */
+
+	ATA_HORKAGE_DIAGNOSTIC	= (1 << 0),	/* Failed boot diag */
+	ATA_HORKAGE_NODMA	= (1 << 1),	/* DMA problems */
+	ATA_HORKAGE_NONCQ	= (1 << 2),	/* Don't use NCQ */
+	ATA_HORKAGE_MAX_SEC_128	= (1 << 3),	/* Limit max sects to 128 */
+	ATA_HORKAGE_BROKEN_HPA	= (1 << 4),	/* Broken HPA */
+	ATA_HORKAGE_DISABLE	= (1 << 5),	/* Disable it */
+	ATA_HORKAGE_HPA_SIZE	= (1 << 6),	/* native size off by one */
+	ATA_HORKAGE_IVB		= (1 << 8),	/* cbl det validity bit bugs */
+	ATA_HORKAGE_STUCK_ERR	= (1 << 9),	/* stuck ERR on next PACKET */
+	ATA_HORKAGE_BRIDGE_OK	= (1 << 10),	/* no bridge limits */
+	ATA_HORKAGE_ATAPI_MOD16_DMA = (1 << 11), /* use ATAPI DMA for commands
+						    not multiple of 16 bytes */
+	ATA_HORKAGE_FIRMWARE_WARN = (1 << 12),	/* firmware update warning */
+	ATA_HORKAGE_1_5_GBPS	= (1 << 13),	/* force 1.5 Gbps */
+	ATA_HORKAGE_NOSETXFER	= (1 << 14),	/* skip SETXFER, SATA only */
+	ATA_HORKAGE_BROKEN_FPDMA_AA	= (1 << 15),	/* skip AA */
+	ATA_HORKAGE_DUMP_ID	= (1 << 16),	/* dump IDENTIFY data */
+
+	 /* DMA mask for user DMA control: User visible values; DO NOT
+	    renumber */
+	ATA_DMA_MASK_ATA	= (1 << 0),	/* DMA on ATA Disk */
+	ATA_DMA_MASK_ATAPI	= (1 << 1),	/* DMA on ATAPI */
+	ATA_DMA_MASK_CFA	= (1 << 2),	/* DMA on CF Card */
+
+	/* ATAPI command types */
+	ATAPI_READ		= 0,		/* READs */
+	ATAPI_WRITE		= 1,		/* WRITEs */
+	ATAPI_READ_CD		= 2,		/* READ CD [MSF] */
+	ATAPI_PASS_THRU		= 3,		/* SAT pass-thru */
+	ATAPI_MISC		= 4,		/* the rest */
+
+	/* Timing constants */
+	ATA_TIMING_SETUP	= (1 << 0),
+	ATA_TIMING_ACT8B	= (1 << 1),
+	ATA_TIMING_REC8B	= (1 << 2),
+	ATA_TIMING_CYC8B	= (1 << 3),
+	ATA_TIMING_8BIT		= ATA_TIMING_ACT8B | ATA_TIMING_REC8B |
+				  ATA_TIMING_CYC8B,
+	ATA_TIMING_ACTIVE	= (1 << 4),
+	ATA_TIMING_RECOVER	= (1 << 5),
+	ATA_TIMING_DMACK_HOLD	= (1 << 6),
+	ATA_TIMING_CYCLE	= (1 << 7),
+	ATA_TIMING_UDMA		= (1 << 8),
+	ATA_TIMING_ALL		= ATA_TIMING_SETUP | ATA_TIMING_ACT8B |
+				  ATA_TIMING_REC8B | ATA_TIMING_CYC8B |
+				  ATA_TIMING_ACTIVE | ATA_TIMING_RECOVER |
+				  ATA_TIMING_DMACK_HOLD | ATA_TIMING_CYCLE |
+				  ATA_TIMING_UDMA,
+
+	/* ACPI constants */
+	ATA_ACPI_FILTER_SETXFER	= 1 << 0,
+	ATA_ACPI_FILTER_LOCK	= 1 << 1,
+	ATA_ACPI_FILTER_DIPM	= 1 << 2,
+	ATA_ACPI_FILTER_FPDMA_OFFSET = 1 << 3,	/* FPDMA non-zero offset */
+	ATA_ACPI_FILTER_FPDMA_AA = 1 << 4,	/* FPDMA auto activate */
+
+	ATA_ACPI_FILTER_DEFAULT	= ATA_ACPI_FILTER_SETXFER |
+				  ATA_ACPI_FILTER_LOCK |
+				  ATA_ACPI_FILTER_DIPM,
+};
+
+enum ata_xfer_mask {
+	ATA_MASK_PIO		= ((1LU << ATA_NR_PIO_MODES) - 1)
+					<< ATA_SHIFT_PIO,
+	ATA_MASK_MWDMA		= ((1LU << ATA_NR_MWDMA_MODES) - 1)
+					<< ATA_SHIFT_MWDMA,
+	ATA_MASK_UDMA		= ((1LU << ATA_NR_UDMA_MODES) - 1)
+					<< ATA_SHIFT_UDMA,
+};
+
+enum hsm_task_states {
+	HSM_ST_IDLE,		/* no command on going */
+	HSM_ST_FIRST,		/* (waiting the device to)
+				   write CDB or first data block */
+	HSM_ST,			/* (waiting the device to) transfer data */
+	HSM_ST_LAST,		/* (waiting the device to) complete command */
+	HSM_ST_ERR,		/* error */
+};
+
+enum ata_completion_errors {
+	AC_ERR_DEV		= (1 << 0), /* device reported error */
+	AC_ERR_HSM		= (1 << 1), /* host state machine violation */
+	AC_ERR_TIMEOUT		= (1 << 2), /* timeout */
+	AC_ERR_MEDIA		= (1 << 3), /* media error */
+	AC_ERR_ATA_BUS		= (1 << 4), /* ATA bus error */
+	AC_ERR_HOST_BUS		= (1 << 5), /* host bus error */
+	AC_ERR_SYSTEM		= (1 << 6), /* system error */
+	AC_ERR_INVALID		= (1 << 7), /* invalid argument */
+	AC_ERR_OTHER		= (1 << 8), /* unknown */
+	AC_ERR_NODEV_HINT	= (1 << 9), /* polling device detection hint */
+	AC_ERR_NCQ		= (1 << 10), /* marker for offending NCQ qc */
+};
+
+/*
+ * Link power management policy: If you alter this, you also need to
+ * alter libata-scsi.c (for the ascii descriptions)
+ */
+enum ata_lpm_policy {
+	ATA_LPM_UNKNOWN,
+	ATA_LPM_MAX_POWER,
+	ATA_LPM_MED_POWER,
+	ATA_LPM_MIN_POWER,
+};
+
+enum ata_lpm_hints {
+	ATA_LPM_EMPTY		= (1 << 0), /* port empty/probing */
+	ATA_LPM_HIPM		= (1 << 1), /* may use HIPM */
+};
+
+/* forward declarations */
+struct scsi_device;
+struct ata_port_operations;
+struct ata_port;
+struct ata_link;
+struct ata_queued_cmd;
+
+/* typedefs */
+typedef void (*ata_qc_cb_t) (struct ata_queued_cmd *qc);
+typedef int (*ata_prereset_fn_t)(struct ata_link *link, unsigned long deadline);
+typedef int (*ata_reset_fn_t)(struct ata_link *link, unsigned int *classes,
+			      unsigned long deadline);
+typedef void (*ata_postreset_fn_t)(struct ata_link *link, unsigned int *classes);
+
+extern struct device_attribute dev_attr_link_power_management_policy;
+extern struct device_attribute dev_attr_unload_heads;
+extern struct device_attribute dev_attr_em_message_type;
+extern struct device_attribute dev_attr_em_message;
+extern struct device_attribute dev_attr_sw_activity;
+
+enum sw_activity {
+	OFF,
+	BLINK_ON,
+	BLINK_OFF,
+};
+
+#ifdef CONFIG_ATA_SFF
+struct ata_ioports {
+	void __iomem		*cmd_addr;
+	void __iomem		*data_addr;
+	void __iomem		*error_addr;
+	void __iomem		*feature_addr;
+	void __iomem		*nsect_addr;
+	void __iomem		*lbal_addr;
+	void __iomem		*lbam_addr;
+	void __iomem		*lbah_addr;
+	void __iomem		*device_addr;
+	void __iomem		*status_addr;
+	void __iomem		*command_addr;
+	void __iomem		*altstatus_addr;
+	void __iomem		*ctl_addr;
+#ifdef CONFIG_ATA_BMDMA
+	void __iomem		*bmdma_addr;
+#endif /* CONFIG_ATA_BMDMA */
+	void __iomem		*scr_addr;
+};
+#endif /* CONFIG_ATA_SFF */
+
+struct ata_host {
+	spinlock_t		lock;
+	struct device 		*dev;
+	void __iomem * const	*iomap;
+	unsigned int		n_ports;
+	void			*private_data;
+	struct ata_port_operations *ops;
+	unsigned long		flags;
+
+	struct mutex		eh_mutex;
+	struct task_struct	*eh_owner;
+
+#ifdef CONFIG_ATA_ACPI
+	acpi_handle		acpi_handle;
+#endif
+	struct ata_port		*simplex_claimed;	/* channel owning the DMA */
+	struct ata_port		*ports[0];
+};
+
+struct ata_queued_cmd {
+	struct ata_port		*ap;
+	struct ata_device	*dev;
+
+	struct scsi_cmnd	*scsicmd;
+	void			(*scsidone)(struct scsi_cmnd *);
+
+	struct ata_taskfile	tf;
+	u8			cdb[ATAPI_CDB_LEN];
+
+	unsigned long		flags;		/* ATA_QCFLAG_xxx */
+	unsigned int		tag;
+	unsigned int		n_elem;
+	unsigned int		orig_n_elem;
+
+	int			dma_dir;
+
+	unsigned int		sect_size;
+
+	unsigned int		nbytes;
+	unsigned int		extrabytes;
+	unsigned int		curbytes;
+
+	struct scatterlist	sgent;
+
+	struct scatterlist	*sg;
+
+	struct scatterlist	*cursg;
+	unsigned int		cursg_ofs;
+
+	unsigned int		err_mask;
+	struct ata_taskfile	result_tf;
+	ata_qc_cb_t		complete_fn;
+
+	void			*private_data;
+	void			*lldd_task;
+};
+
+struct ata_port_stats {
+	unsigned long		unhandled_irq;
+	unsigned long		idle_irq;
+	unsigned long		rw_reqbuf;
+};
+
+struct ata_ering_entry {
+	unsigned int		eflags;
+	unsigned int		err_mask;
+	u64			timestamp;
+};
+
+struct ata_ering {
+	int			cursor;
+	struct ata_ering_entry	ring[ATA_ERING_SIZE];
+};
+
+struct ata_device {
+	struct ata_link		*link;
+	unsigned int		devno;		/* 0 or 1 */
+	unsigned int		horkage;	/* List of broken features */
+	unsigned long		flags;		/* ATA_DFLAG_xxx */
+	struct scsi_device	*sdev;		/* attached SCSI device */
+	void			*private_data;
+#ifdef CONFIG_ATA_ACPI
+	acpi_handle		acpi_handle;
+	union acpi_object	*gtf_cache;
+	unsigned int		gtf_filter;
+#endif
+	struct device		tdev;
+	/* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */
+	u64			n_sectors;	/* size of device, if ATA */
+	u64			n_native_sectors; /* native size, if ATA */
+	unsigned int		class;		/* ATA_DEV_xxx */
+	unsigned long		unpark_deadline;
+
+	u8			pio_mode;
+	u8			dma_mode;
+	u8			xfer_mode;
+	unsigned int		xfer_shift;	/* ATA_SHIFT_xxx */
+
+	unsigned int		multi_count;	/* sectors count for
+						   READ/WRITE MULTIPLE */
+	unsigned int		max_sectors;	/* per-device max sectors */
+	unsigned int		cdb_len;
+
+	/* per-dev xfer mask */
+	unsigned long		pio_mask;
+	unsigned long		mwdma_mask;
+	unsigned long		udma_mask;
+
+	/* for CHS addressing */
+	u16			cylinders;	/* Number of cylinders */
+	u16			heads;		/* Number of heads */
+	u16			sectors;	/* Number of sectors per track */
+
+	union {
+		u16		id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */
+		u32		gscr[SATA_PMP_GSCR_DWORDS]; /* PMP GSCR block */
+	};
+
+	/* error history */
+	int			spdn_cnt;
+	/* ering is CLEAR_END, read comment above CLEAR_END */
+	struct ata_ering	ering;
+};
+
+/* Fields between ATA_DEVICE_CLEAR_BEGIN and ATA_DEVICE_CLEAR_END are
+ * cleared to zero on ata_dev_init().
+ */
+#define ATA_DEVICE_CLEAR_BEGIN		offsetof(struct ata_device, n_sectors)
+#define ATA_DEVICE_CLEAR_END		offsetof(struct ata_device, ering)
+
+struct ata_eh_info {
+	struct ata_device	*dev;		/* offending device */
+	u32			serror;		/* SError from LLDD */
+	unsigned int		err_mask;	/* port-wide err_mask */
+	unsigned int		action;		/* ATA_EH_* action mask */
+	unsigned int		dev_action[ATA_MAX_DEVICES]; /* dev EH action */
+	unsigned int		flags;		/* ATA_EHI_* flags */
+
+	unsigned int		probe_mask;
+
+	char			desc[ATA_EH_DESC_LEN];
+	int			desc_len;
+};
+
+struct ata_eh_context {
+	struct ata_eh_info	i;
+	int			tries[ATA_MAX_DEVICES];
+	int			cmd_timeout_idx[ATA_MAX_DEVICES]
+					       [ATA_EH_CMD_TIMEOUT_TABLE_SIZE];
+	unsigned int		classes[ATA_MAX_DEVICES];
+	unsigned int		did_probe_mask;
+	unsigned int		unloaded_mask;
+	unsigned int		saved_ncq_enabled;
+	u8			saved_xfer_mode[ATA_MAX_DEVICES];
+	/* timestamp for the last reset attempt or success */
+	unsigned long		last_reset;
+};
+
+struct ata_acpi_drive
+{
+	u32 pio;
+	u32 dma;
+} __packed;
+
+struct ata_acpi_gtm {
+	struct ata_acpi_drive drive[2];
+	u32 flags;
+} __packed;
+
+struct ata_link {
+	struct ata_port		*ap;
+	int			pmp;		/* port multiplier port # */
+
+	struct device		tdev;
+	unsigned int		active_tag;	/* active tag on this link */
+	u32			sactive;	/* active NCQ commands */
+
+	unsigned int		flags;		/* ATA_LFLAG_xxx */
+
+	u32			saved_scontrol;	/* SControl on probe */
+	unsigned int		hw_sata_spd_limit;
+	unsigned int		sata_spd_limit;
+	unsigned int		sata_spd;	/* current SATA PHY speed */
+	enum ata_lpm_policy	lpm_policy;
+
+	/* record runtime error info, protected by host_set lock */
+	struct ata_eh_info	eh_info;
+	/* EH context */
+	struct ata_eh_context	eh_context;
+
+	struct ata_device	device[ATA_MAX_DEVICES];
+};
+#define ATA_LINK_CLEAR_BEGIN		offsetof(struct ata_link, active_tag)
+#define ATA_LINK_CLEAR_END		offsetof(struct ata_link, device[0])
+
+struct ata_port {
+	struct Scsi_Host	*scsi_host; /* our co-allocated scsi host */
+	struct ata_port_operations *ops;
+	spinlock_t		*lock;
+	/* Flags owned by the EH context. Only EH should touch these once the
+	   port is active */
+	unsigned long		flags;	/* ATA_FLAG_xxx */
+	/* Flags that change dynamically, protected by ap->lock */
+	unsigned int		pflags; /* ATA_PFLAG_xxx */
+	unsigned int		print_id; /* user visible unique port ID */
+	unsigned int		port_no; /* 0 based port no. inside the host */
+
+#ifdef CONFIG_ATA_SFF
+	struct ata_ioports	ioaddr;	/* ATA cmd/ctl/dma register blocks */
+	u8			ctl;	/* cache of ATA control register */
+	u8			last_ctl;	/* Cache last written value */
+	struct ata_link*	sff_pio_task_link; /* link currently used */
+	struct delayed_work	sff_pio_task;
+#ifdef CONFIG_ATA_BMDMA
+	struct ata_bmdma_prd	*bmdma_prd;	/* BMDMA SG list */
+	dma_addr_t		bmdma_prd_dma;	/* and its DMA mapping */
+#endif /* CONFIG_ATA_BMDMA */
+#endif /* CONFIG_ATA_SFF */
+
+	unsigned int		pio_mask;
+	unsigned int		mwdma_mask;
+	unsigned int		udma_mask;
+	unsigned int		cbl;	/* cable type; ATA_CBL_xxx */
+
+	struct ata_queued_cmd	qcmd[ATA_MAX_QUEUE];
+	unsigned long		qc_allocated;
+	unsigned int		qc_active;
+	int			nr_active_links; /* #links with active qcs */
+
+	struct ata_link		link;		/* host default link */
+	struct ata_link		*slave_link;	/* see ata_slave_link_init() */
+
+	int			nr_pmp_links;	/* nr of available PMP links */
+	struct ata_link		*pmp_link;	/* array of PMP links */
+	struct ata_link		*excl_link;	/* for PMP qc exclusion */
+
+	struct ata_port_stats	stats;
+	struct ata_host		*host;
+	struct device 		*dev;
+	struct device		tdev;
+
+	struct mutex		scsi_scan_mutex;
+	struct delayed_work	hotplug_task;
+	struct work_struct	scsi_rescan_task;
+
+	unsigned int		hsm_task_state;
+
+	u32			msg_enable;
+	struct list_head	eh_done_q;
+	wait_queue_head_t	eh_wait_q;
+	int			eh_tries;
+	struct completion	park_req_pending;
+
+	pm_message_t		pm_mesg;
+	int			*pm_result;
+	enum ata_lpm_policy	target_lpm_policy;
+
+	struct timer_list	fastdrain_timer;
+	unsigned long		fastdrain_cnt;
+
+	int			em_message_type;
+	void			*private_data;
+
+#ifdef CONFIG_ATA_ACPI
+	acpi_handle		acpi_handle;
+	struct ata_acpi_gtm	__acpi_init_gtm; /* use ata_acpi_init_gtm() */
+#endif
+	/* owned by EH */
+	u8			sector_buf[ATA_SECT_SIZE] ____cacheline_aligned;
+};
+
+/* The following initializer overrides a method to NULL whether one of
+ * its parent has the method defined or not.  This is equivalent to
+ * ERR_PTR(-ENOENT).  Unfortunately, ERR_PTR doesn't render a constant
+ * expression and thus can't be used as an initializer.
+ */
+#define ATA_OP_NULL		(void *)(unsigned long)(-ENOENT)
+
+struct ata_port_operations {
+	/*
+	 * Command execution
+	 */
+	int  (*qc_defer)(struct ata_queued_cmd *qc);
+	int  (*check_atapi_dma)(struct ata_queued_cmd *qc);
+	void (*qc_prep)(struct ata_queued_cmd *qc);
+	unsigned int (*qc_issue)(struct ata_queued_cmd *qc);
+	bool (*qc_fill_rtf)(struct ata_queued_cmd *qc);
+
+	/*
+	 * Configuration and exception handling
+	 */
+	int  (*cable_detect)(struct ata_port *ap);
+	unsigned long (*mode_filter)(struct ata_device *dev, unsigned long xfer_mask);
+	void (*set_piomode)(struct ata_port *ap, struct ata_device *dev);
+	void (*set_dmamode)(struct ata_port *ap, struct ata_device *dev);
+	int  (*set_mode)(struct ata_link *link, struct ata_device **r_failed_dev);
+	unsigned int (*read_id)(struct ata_device *dev, struct ata_taskfile *tf, u16 *id);
+
+	void (*dev_config)(struct ata_device *dev);
+
+	void (*freeze)(struct ata_port *ap);
+	void (*thaw)(struct ata_port *ap);
+	ata_prereset_fn_t	prereset;
+	ata_reset_fn_t		softreset;
+	ata_reset_fn_t		hardreset;
+	ata_postreset_fn_t	postreset;
+	ata_prereset_fn_t	pmp_prereset;
+	ata_reset_fn_t		pmp_softreset;
+	ata_reset_fn_t		pmp_hardreset;
+	ata_postreset_fn_t	pmp_postreset;
+	void (*error_handler)(struct ata_port *ap);
+	void (*lost_interrupt)(struct ata_port *ap);
+	void (*post_internal_cmd)(struct ata_queued_cmd *qc);
+
+	/*
+	 * Optional features
+	 */
+	int  (*scr_read)(struct ata_link *link, unsigned int sc_reg, u32 *val);
+	int  (*scr_write)(struct ata_link *link, unsigned int sc_reg, u32 val);
+	void (*pmp_attach)(struct ata_port *ap);
+	void (*pmp_detach)(struct ata_port *ap);
+	int  (*set_lpm)(struct ata_link *link, enum ata_lpm_policy policy,
+			unsigned hints);
+
+	/*
+	 * Start, stop, suspend and resume
+	 */
+	int  (*port_suspend)(struct ata_port *ap, pm_message_t mesg);
+	int  (*port_resume)(struct ata_port *ap);
+	int  (*port_start)(struct ata_port *ap);
+	void (*port_stop)(struct ata_port *ap);
+	void (*host_stop)(struct ata_host *host);
+
+#ifdef CONFIG_ATA_SFF
+	/*
+	 * SFF / taskfile oriented ops
+	 */
+	void (*sff_dev_select)(struct ata_port *ap, unsigned int device);
+	void (*sff_set_devctl)(struct ata_port *ap, u8 ctl);
+	u8   (*sff_check_status)(struct ata_port *ap);
+	u8   (*sff_check_altstatus)(struct ata_port *ap);
+	void (*sff_tf_load)(struct ata_port *ap, const struct ata_taskfile *tf);
+	void (*sff_tf_read)(struct ata_port *ap, struct ata_taskfile *tf);
+	void (*sff_exec_command)(struct ata_port *ap,
+				 const struct ata_taskfile *tf);
+	unsigned int (*sff_data_xfer)(struct ata_device *dev,
+			unsigned char *buf, unsigned int buflen, int rw);
+	void (*sff_irq_on)(struct ata_port *);
+	bool (*sff_irq_check)(struct ata_port *);
+	void (*sff_irq_clear)(struct ata_port *);
+	void (*sff_drain_fifo)(struct ata_queued_cmd *qc);
+
+#ifdef CONFIG_ATA_BMDMA
+	void (*bmdma_setup)(struct ata_queued_cmd *qc);
+	void (*bmdma_start)(struct ata_queued_cmd *qc);
+	void (*bmdma_stop)(struct ata_queued_cmd *qc);
+	u8   (*bmdma_status)(struct ata_port *ap);
+#endif /* CONFIG_ATA_BMDMA */
+#endif /* CONFIG_ATA_SFF */
+
+	ssize_t (*em_show)(struct ata_port *ap, char *buf);
+	ssize_t (*em_store)(struct ata_port *ap, const char *message,
+			    size_t size);
+	ssize_t (*sw_activity_show)(struct ata_device *dev, char *buf);
+	ssize_t (*sw_activity_store)(struct ata_device *dev,
+				     enum sw_activity val);
+	/*
+	 * Obsolete
+	 */
+	void (*phy_reset)(struct ata_port *ap);
+	void (*eng_timeout)(struct ata_port *ap);
+
+	/*
+	 * ->inherits must be the last field and all the preceding
+	 * fields must be pointers.
+	 */
+	const struct ata_port_operations	*inherits;
+};
+
+struct ata_port_info {
+	unsigned long		flags;
+	unsigned long		link_flags;
+	unsigned long		pio_mask;
+	unsigned long		mwdma_mask;
+	unsigned long		udma_mask;
+	struct ata_port_operations *port_ops;
+	void 			*private_data;
+};
+
+struct ata_timing {
+	unsigned short mode;		/* ATA mode */
+	unsigned short setup;		/* t1 */
+	unsigned short act8b;		/* t2 for 8-bit I/O */
+	unsigned short rec8b;		/* t2i for 8-bit I/O */
+	unsigned short cyc8b;		/* t0 for 8-bit I/O */
+	unsigned short active;		/* t2 or tD */
+	unsigned short recover;		/* t2i or tK */
+	unsigned short dmack_hold;	/* tj */
+	unsigned short cycle;		/* t0 */
+	unsigned short udma;		/* t2CYCTYP/2 */
+};
+
+/*
+ * Core layer - drivers/ata/libata-core.c
+ */
+extern const unsigned long sata_deb_timing_normal[];
+extern const unsigned long sata_deb_timing_hotplug[];
+extern const unsigned long sata_deb_timing_long[];
+
+extern struct ata_port_operations ata_dummy_port_ops;
+extern const struct ata_port_info ata_dummy_port_info;
+
+static inline const unsigned long *
+sata_ehc_deb_timing(struct ata_eh_context *ehc)
+{
+	if (ehc->i.flags & ATA_EHI_HOTPLUGGED)
+		return sata_deb_timing_hotplug;
+	else
+		return sata_deb_timing_normal;
+}
+
+static inline int ata_port_is_dummy(struct ata_port *ap)
+{
+	return ap->ops == &ata_dummy_port_ops;
+}
+
+extern int sata_set_spd(struct ata_link *link);
+extern int ata_std_prereset(struct ata_link *link, unsigned long deadline);
+extern int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
+				int (*check_ready)(struct ata_link *link));
+extern int sata_link_debounce(struct ata_link *link,
+			const unsigned long *params, unsigned long deadline);
+extern int sata_link_resume(struct ata_link *link, const unsigned long *params,
+			    unsigned long deadline);
+extern int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy,
+			     bool spm_wakeup);
+extern int sata_link_hardreset(struct ata_link *link,
+			const unsigned long *timing, unsigned long deadline,
+			bool *online, int (*check_ready)(struct ata_link *));
+extern int sata_std_hardreset(struct ata_link *link, unsigned int *class,
+			      unsigned long deadline);
+extern void ata_std_postreset(struct ata_link *link, unsigned int *classes);
+
+extern struct ata_host *ata_host_alloc(struct device *dev, int max_ports);
+extern struct ata_host *ata_host_alloc_pinfo(struct device *dev,
+			const struct ata_port_info * const * ppi, int n_ports);
+extern int ata_slave_link_init(struct ata_port *ap);
+extern int ata_host_start(struct ata_host *host);
+extern int ata_host_register(struct ata_host *host,
+			     struct scsi_host_template *sht);
+extern int ata_host_activate(struct ata_host *host, int irq,
+			     irq_handler_t irq_handler, unsigned long irq_flags,
+			     struct scsi_host_template *sht);
+extern void ata_host_detach(struct ata_host *host);
+extern void ata_host_init(struct ata_host *, struct device *,
+			  unsigned long, struct ata_port_operations *);
+extern int ata_scsi_detect(struct scsi_host_template *sht);
+extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg);
+extern int ata_scsi_queuecmd(struct Scsi_Host *h, struct scsi_cmnd *cmd);
+extern int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *dev,
+			    int cmd, void __user *arg);
+extern void ata_sas_port_destroy(struct ata_port *);
+extern struct ata_port *ata_sas_port_alloc(struct ata_host *,
+					   struct ata_port_info *, struct Scsi_Host *);
+extern void ata_sas_async_probe(struct ata_port *ap);
+extern int ata_sas_sync_probe(struct ata_port *ap);
+extern int ata_sas_port_init(struct ata_port *);
+extern int ata_sas_port_start(struct ata_port *ap);
+extern void ata_sas_port_stop(struct ata_port *ap);
+extern int ata_sas_slave_configure(struct scsi_device *, struct ata_port *);
+extern int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap);
+extern int sata_scr_valid(struct ata_link *link);
+extern int sata_scr_read(struct ata_link *link, int reg, u32 *val);
+extern int sata_scr_write(struct ata_link *link, int reg, u32 val);
+extern int sata_scr_write_flush(struct ata_link *link, int reg, u32 val);
+extern bool ata_link_online(struct ata_link *link);
+extern bool ata_link_offline(struct ata_link *link);
+#ifdef CONFIG_PM
+extern int ata_host_suspend(struct ata_host *host, pm_message_t mesg);
+extern void ata_host_resume(struct ata_host *host);
+#endif
+extern int ata_ratelimit(void);
+extern void ata_msleep(struct ata_port *ap, unsigned int msecs);
+extern u32 ata_wait_register(struct ata_port *ap, void __iomem *reg, u32 mask,
+			u32 val, unsigned long interval, unsigned long timeout);
+extern int atapi_cmd_type(u8 opcode);
+extern void ata_tf_to_fis(const struct ata_taskfile *tf,
+			  u8 pmp, int is_cmd, u8 *fis);
+extern void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf);
+extern unsigned long ata_pack_xfermask(unsigned long pio_mask,
+			unsigned long mwdma_mask, unsigned long udma_mask);
+extern void ata_unpack_xfermask(unsigned long xfer_mask,
+			unsigned long *pio_mask, unsigned long *mwdma_mask,
+			unsigned long *udma_mask);
+extern u8 ata_xfer_mask2mode(unsigned long xfer_mask);
+extern unsigned long ata_xfer_mode2mask(u8 xfer_mode);
+extern int ata_xfer_mode2shift(unsigned long xfer_mode);
+extern const char *ata_mode_string(unsigned long xfer_mask);
+extern unsigned long ata_id_xfermask(const u16 *id);
+extern int ata_std_qc_defer(struct ata_queued_cmd *qc);
+extern void ata_noop_qc_prep(struct ata_queued_cmd *qc);
+extern void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
+		 unsigned int n_elem);
+extern unsigned int ata_dev_classify(const struct ata_taskfile *tf);
+extern void ata_dev_disable(struct ata_device *adev);
+extern void ata_id_string(const u16 *id, unsigned char *s,
+			  unsigned int ofs, unsigned int len);
+extern void ata_id_c_string(const u16 *id, unsigned char *s,
+			    unsigned int ofs, unsigned int len);
+extern unsigned int ata_do_dev_read_id(struct ata_device *dev,
+					struct ata_taskfile *tf, u16 *id);
+extern void ata_qc_complete(struct ata_queued_cmd *qc);
+extern int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active);
+extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd);
+extern int ata_std_bios_param(struct scsi_device *sdev,
+			      struct block_device *bdev,
+			      sector_t capacity, int geom[]);
+extern void ata_scsi_unlock_native_capacity(struct scsi_device *sdev);
+extern int ata_scsi_slave_config(struct scsi_device *sdev);
+extern void ata_scsi_slave_destroy(struct scsi_device *sdev);
+extern int ata_scsi_change_queue_depth(struct scsi_device *sdev,
+				       int queue_depth, int reason);
+extern int __ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev,
+				    int queue_depth, int reason);
+extern struct ata_device *ata_dev_pair(struct ata_device *adev);
+extern int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev);
+extern void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap);
+extern void ata_scsi_cmd_error_handler(struct Scsi_Host *host, struct ata_port *ap, struct list_head *eh_q);
+
+extern int ata_cable_40wire(struct ata_port *ap);
+extern int ata_cable_80wire(struct ata_port *ap);
+extern int ata_cable_sata(struct ata_port *ap);
+extern int ata_cable_ignore(struct ata_port *ap);
+extern int ata_cable_unknown(struct ata_port *ap);
+
+/* Timing helpers */
+extern unsigned int ata_pio_need_iordy(const struct ata_device *);
+extern const struct ata_timing *ata_timing_find_mode(u8 xfer_mode);
+extern int ata_timing_compute(struct ata_device *, unsigned short,
+			      struct ata_timing *, int, int);
+extern void ata_timing_merge(const struct ata_timing *,
+			     const struct ata_timing *, struct ata_timing *,
+			     unsigned int);
+extern u8 ata_timing_cycle2mode(unsigned int xfer_shift, int cycle);
+
+/* PCI */
+#ifdef CONFIG_PCI
+struct pci_dev;
+
+struct pci_bits {
+	unsigned int		reg;	/* PCI config register to read */
+	unsigned int		width;	/* 1 (8 bit), 2 (16 bit), 4 (32 bit) */
+	unsigned long		mask;
+	unsigned long		val;
+};
+
+extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits);
+extern void ata_pci_remove_one(struct pci_dev *pdev);
+
+#ifdef CONFIG_PM
+extern void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg);
+extern int __must_check ata_pci_device_do_resume(struct pci_dev *pdev);
+extern int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
+extern int ata_pci_device_resume(struct pci_dev *pdev);
+#endif /* CONFIG_PM */
+#endif /* CONFIG_PCI */
+
+/*
+ * ACPI - drivers/ata/libata-acpi.c
+ */
+#ifdef CONFIG_ATA_ACPI
+static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap)
+{
+	if (ap->pflags & ATA_PFLAG_INIT_GTM_VALID)
+		return &ap->__acpi_init_gtm;
+	return NULL;
+}
+int ata_acpi_stm(struct ata_port *ap, const struct ata_acpi_gtm *stm);
+int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *stm);
+unsigned long ata_acpi_gtm_xfermask(struct ata_device *dev,
+				    const struct ata_acpi_gtm *gtm);
+int ata_acpi_cbl_80wire(struct ata_port *ap, const struct ata_acpi_gtm *gtm);
+#else
+static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap)
+{
+	return NULL;
+}
+
+static inline int ata_acpi_stm(const struct ata_port *ap,
+			       struct ata_acpi_gtm *stm)
+{
+	return -ENOSYS;
+}
+
+static inline int ata_acpi_gtm(const struct ata_port *ap,
+			       struct ata_acpi_gtm *stm)
+{
+	return -ENOSYS;
+}
+
+static inline unsigned int ata_acpi_gtm_xfermask(struct ata_device *dev,
+					const struct ata_acpi_gtm *gtm)
+{
+	return 0;
+}
+
+static inline int ata_acpi_cbl_80wire(struct ata_port *ap,
+				      const struct ata_acpi_gtm *gtm)
+{
+	return 0;
+}
+#endif
+
+/*
+ * EH - drivers/ata/libata-eh.c
+ */
+extern void ata_port_schedule_eh(struct ata_port *ap);
+extern void ata_port_wait_eh(struct ata_port *ap);
+extern int ata_link_abort(struct ata_link *link);
+extern int ata_port_abort(struct ata_port *ap);
+extern int ata_port_freeze(struct ata_port *ap);
+extern int sata_async_notification(struct ata_port *ap);
+
+extern void ata_eh_freeze_port(struct ata_port *ap);
+extern void ata_eh_thaw_port(struct ata_port *ap);
+
+extern void ata_eh_qc_complete(struct ata_queued_cmd *qc);
+extern void ata_eh_qc_retry(struct ata_queued_cmd *qc);
+extern void ata_eh_analyze_ncq_error(struct ata_link *link);
+
+extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
+		      ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
+		      ata_postreset_fn_t postreset);
+extern void ata_std_error_handler(struct ata_port *ap);
+extern int ata_link_nr_enabled(struct ata_link *link);
+
+/*
+ * Base operations to inherit from and initializers for sht
+ *
+ * Operations
+ *
+ * base  : Common to all libata drivers.
+ * sata  : SATA controllers w/ native interface.
+ * pmp   : SATA controllers w/ PMP support.
+ * sff   : SFF ATA controllers w/o BMDMA support.
+ * bmdma : SFF ATA controllers w/ BMDMA support.
+ *
+ * sht initializers
+ *
+ * BASE  : Common to all libata drivers.  The user must set
+ *	   sg_tablesize and dma_boundary.
+ * PIO   : SFF ATA controllers w/ only PIO support.
+ * BMDMA : SFF ATA controllers w/ BMDMA support.  sg_tablesize and
+ *	   dma_boundary are set to BMDMA limits.
+ * NCQ   : SATA controllers supporting NCQ.  The user must set
+ *	   sg_tablesize, dma_boundary and can_queue.
+ */
+extern const struct ata_port_operations ata_base_port_ops;
+extern const struct ata_port_operations sata_port_ops;
+extern struct device_attribute *ata_common_sdev_attrs[];
+
+#define ATA_BASE_SHT(drv_name)					\
+	.module			= THIS_MODULE,			\
+	.name			= drv_name,			\
+	.ioctl			= ata_scsi_ioctl,		\
+	.queuecommand		= ata_scsi_queuecmd,		\
+	.can_queue		= ATA_DEF_QUEUE,		\
+	.this_id		= ATA_SHT_THIS_ID,		\
+	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,		\
+	.emulated		= ATA_SHT_EMULATED,		\
+	.use_clustering		= ATA_SHT_USE_CLUSTERING,	\
+	.proc_name		= drv_name,			\
+	.slave_configure	= ata_scsi_slave_config,	\
+	.slave_destroy		= ata_scsi_slave_destroy,	\
+	.bios_param		= ata_std_bios_param,		\
+	.unlock_native_capacity	= ata_scsi_unlock_native_capacity, \
+	.sdev_attrs		= ata_common_sdev_attrs
+
+#define ATA_NCQ_SHT(drv_name)					\
+	ATA_BASE_SHT(drv_name),					\
+	.change_queue_depth	= ata_scsi_change_queue_depth
+
+/*
+ * PMP helpers
+ */
+#ifdef CONFIG_SATA_PMP
+static inline bool sata_pmp_supported(struct ata_port *ap)
+{
+	return ap->flags & ATA_FLAG_PMP;
+}
+
+static inline bool sata_pmp_attached(struct ata_port *ap)
+{
+	return ap->nr_pmp_links != 0;
+}
+
+static inline int ata_is_host_link(const struct ata_link *link)
+{
+	return link == &link->ap->link || link == link->ap->slave_link;
+}
+#else /* CONFIG_SATA_PMP */
+static inline bool sata_pmp_supported(struct ata_port *ap)
+{
+	return false;
+}
+
+static inline bool sata_pmp_attached(struct ata_port *ap)
+{
+	return false;
+}
+
+static inline int ata_is_host_link(const struct ata_link *link)
+{
+	return 1;
+}
+#endif /* CONFIG_SATA_PMP */
+
+static inline int sata_srst_pmp(struct ata_link *link)
+{
+	if (sata_pmp_supported(link->ap) && ata_is_host_link(link))
+		return SATA_PMP_CTRL_PORT;
+	return link->pmp;
+}
+
+/*
+ * printk helpers
+ */
+__printf(3, 4)
+int ata_port_printk(const struct ata_port *ap, const char *level,
+		    const char *fmt, ...);
+__printf(3, 4)
+int ata_link_printk(const struct ata_link *link, const char *level,
+		    const char *fmt, ...);
+__printf(3, 4)
+int ata_dev_printk(const struct ata_device *dev, const char *level,
+		   const char *fmt, ...);
+
+#define ata_port_err(ap, fmt, ...)				\
+	ata_port_printk(ap, KERN_ERR, fmt, ##__VA_ARGS__)
+#define ata_port_warn(ap, fmt, ...)				\
+	ata_port_printk(ap, KERN_WARNING, fmt, ##__VA_ARGS__)
+#define ata_port_notice(ap, fmt, ...)				\
+	ata_port_printk(ap, KERN_NOTICE, fmt, ##__VA_ARGS__)
+#define ata_port_info(ap, fmt, ...)				\
+	ata_port_printk(ap, KERN_INFO, fmt, ##__VA_ARGS__)
+#define ata_port_dbg(ap, fmt, ...)				\
+	ata_port_printk(ap, KERN_DEBUG, fmt, ##__VA_ARGS__)
+
+#define ata_link_err(link, fmt, ...)				\
+	ata_link_printk(link, KERN_ERR, fmt, ##__VA_ARGS__)
+#define ata_link_warn(link, fmt, ...)				\
+	ata_link_printk(link, KERN_WARNING, fmt, ##__VA_ARGS__)
+#define ata_link_notice(link, fmt, ...)				\
+	ata_link_printk(link, KERN_NOTICE, fmt, ##__VA_ARGS__)
+#define ata_link_info(link, fmt, ...)				\
+	ata_link_printk(link, KERN_INFO, fmt, ##__VA_ARGS__)
+#define ata_link_dbg(link, fmt, ...)				\
+	ata_link_printk(link, KERN_DEBUG, fmt, ##__VA_ARGS__)
+
+#define ata_dev_err(dev, fmt, ...)				\
+	ata_dev_printk(dev, KERN_ERR, fmt, ##__VA_ARGS__)
+#define ata_dev_warn(dev, fmt, ...)				\
+	ata_dev_printk(dev, KERN_WARNING, fmt, ##__VA_ARGS__)
+#define ata_dev_notice(dev, fmt, ...)				\
+	ata_dev_printk(dev, KERN_NOTICE, fmt, ##__VA_ARGS__)
+#define ata_dev_info(dev, fmt, ...)				\
+	ata_dev_printk(dev, KERN_INFO, fmt, ##__VA_ARGS__)
+#define ata_dev_dbg(dev, fmt, ...)				\
+	ata_dev_printk(dev, KERN_DEBUG, fmt, ##__VA_ARGS__)
+
+void ata_print_version(const struct device *dev, const char *version);
+
+/*
+ * ata_eh_info helpers
+ */
+extern __printf(2, 3)
+void __ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...);
+extern __printf(2, 3)
+void ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...);
+extern void ata_ehi_clear_desc(struct ata_eh_info *ehi);
+
+static inline void ata_ehi_hotplugged(struct ata_eh_info *ehi)
+{
+	ehi->probe_mask |= (1 << ATA_MAX_DEVICES) - 1;
+	ehi->flags |= ATA_EHI_HOTPLUGGED;
+	ehi->action |= ATA_EH_RESET | ATA_EH_ENABLE_LINK;
+	ehi->err_mask |= AC_ERR_ATA_BUS;
+}
+
+/*
+ * port description helpers
+ */
+extern __printf(2, 3)
+void ata_port_desc(struct ata_port *ap, const char *fmt, ...);
+#ifdef CONFIG_PCI
+extern void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset,
+			       const char *name);
+#endif
+
+static inline unsigned int ata_tag_valid(unsigned int tag)
+{
+	return (tag < ATA_MAX_QUEUE) ? 1 : 0;
+}
+
+static inline unsigned int ata_tag_internal(unsigned int tag)
+{
+	return tag == ATA_TAG_INTERNAL;
+}
+
+/*
+ * device helpers
+ */
+static inline unsigned int ata_class_enabled(unsigned int class)
+{
+	return class == ATA_DEV_ATA || class == ATA_DEV_ATAPI ||
+		class == ATA_DEV_PMP || class == ATA_DEV_SEMB;
+}
+
+static inline unsigned int ata_class_disabled(unsigned int class)
+{
+	return class == ATA_DEV_ATA_UNSUP || class == ATA_DEV_ATAPI_UNSUP ||
+		class == ATA_DEV_PMP_UNSUP || class == ATA_DEV_SEMB_UNSUP;
+}
+
+static inline unsigned int ata_class_absent(unsigned int class)
+{
+	return !ata_class_enabled(class) && !ata_class_disabled(class);
+}
+
+static inline unsigned int ata_dev_enabled(const struct ata_device *dev)
+{
+	return ata_class_enabled(dev->class);
+}
+
+static inline unsigned int ata_dev_disabled(const struct ata_device *dev)
+{
+	return ata_class_disabled(dev->class);
+}
+
+static inline unsigned int ata_dev_absent(const struct ata_device *dev)
+{
+	return ata_class_absent(dev->class);
+}
+
+/*
+ * link helpers
+ */
+static inline int ata_link_max_devices(const struct ata_link *link)
+{
+	if (ata_is_host_link(link) && link->ap->flags & ATA_FLAG_SLAVE_POSS)
+		return 2;
+	return 1;
+}
+
+static inline int ata_link_active(struct ata_link *link)
+{
+	return ata_tag_valid(link->active_tag) || link->sactive;
+}
+
+/*
+ * Iterators
+ *
+ * ATA_LITER_* constants are used to select link iteration mode and
+ * ATA_DITER_* device iteration mode.
+ *
+ * For a custom iteration directly using ata_{link|dev}_next(), if
+ * @link or @dev, respectively, is NULL, the first element is
+ * returned.  @dev and @link can be any valid device or link and the
+ * next element according to the iteration mode will be returned.
+ * After the last element, NULL is returned.
+ */
+enum ata_link_iter_mode {
+	ATA_LITER_EDGE,		/* if present, PMP links only; otherwise,
+				 * host link.  no slave link */
+	ATA_LITER_HOST_FIRST,	/* host link followed by PMP or slave links */
+	ATA_LITER_PMP_FIRST,	/* PMP links followed by host link,
+				 * slave link still comes after host link */
+};
+
+enum ata_dev_iter_mode {
+	ATA_DITER_ENABLED,
+	ATA_DITER_ENABLED_REVERSE,
+	ATA_DITER_ALL,
+	ATA_DITER_ALL_REVERSE,
+};
+
+extern struct ata_link *ata_link_next(struct ata_link *link,
+				      struct ata_port *ap,
+				      enum ata_link_iter_mode mode);
+
+extern struct ata_device *ata_dev_next(struct ata_device *dev,
+				       struct ata_link *link,
+				       enum ata_dev_iter_mode mode);
+
+/*
+ * Shortcut notation for iterations
+ *
+ * ata_for_each_link() iterates over each link of @ap according to
+ * @mode.  @link points to the current link in the loop.  @link is
+ * NULL after loop termination.  ata_for_each_dev() works the same way
+ * except that it iterates over each device of @link.
+ *
+ * Note that the mode prefixes ATA_{L|D}ITER_ shouldn't need to be
+ * specified when using the following shorthand notations.  Only the
+ * mode itself (EDGE, HOST_FIRST, ENABLED, etc...) should be
+ * specified.  This not only increases brevity but also makes it
+ * impossible to use ATA_LITER_* for device iteration or vice-versa.
+ */
+#define ata_for_each_link(link, ap, mode) \
+	for ((link) = ata_link_next(NULL, (ap), ATA_LITER_##mode); (link); \
+	     (link) = ata_link_next((link), (ap), ATA_LITER_##mode))
+
+#define ata_for_each_dev(dev, link, mode) \
+	for ((dev) = ata_dev_next(NULL, (link), ATA_DITER_##mode); (dev); \
+	     (dev) = ata_dev_next((dev), (link), ATA_DITER_##mode))
+
+/**
+ *	ata_ncq_enabled - Test whether NCQ is enabled
+ *	@dev: ATA device to test for
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ *
+ *	RETURNS:
+ *	1 if NCQ is enabled for @dev, 0 otherwise.
+ */
+static inline int ata_ncq_enabled(struct ata_device *dev)
+{
+	return (dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ_OFF |
+			      ATA_DFLAG_NCQ)) == ATA_DFLAG_NCQ;
+}
+
+static inline void ata_qc_set_polling(struct ata_queued_cmd *qc)
+{
+	qc->tf.ctl |= ATA_NIEN;
+}
+
+static inline struct ata_queued_cmd *__ata_qc_from_tag(struct ata_port *ap,
+						       unsigned int tag)
+{
+	if (likely(ata_tag_valid(tag)))
+		return &ap->qcmd[tag];
+	return NULL;
+}
+
+static inline struct ata_queued_cmd *ata_qc_from_tag(struct ata_port *ap,
+						     unsigned int tag)
+{
+	struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag);
+
+	if (unlikely(!qc) || !ap->ops->error_handler)
+		return qc;
+
+	if ((qc->flags & (ATA_QCFLAG_ACTIVE |
+			  ATA_QCFLAG_FAILED)) == ATA_QCFLAG_ACTIVE)
+		return qc;
+
+	return NULL;
+}
+
+static inline unsigned int ata_qc_raw_nbytes(struct ata_queued_cmd *qc)
+{
+	return qc->nbytes - min(qc->extrabytes, qc->nbytes);
+}
+
+static inline void ata_tf_init(struct ata_device *dev, struct ata_taskfile *tf)
+{
+	memset(tf, 0, sizeof(*tf));
+
+#ifdef CONFIG_ATA_SFF
+	tf->ctl = dev->link->ap->ctl;
+#else
+	tf->ctl = ATA_DEVCTL_OBS;
+#endif
+	if (dev->devno == 0)
+		tf->device = ATA_DEVICE_OBS;
+	else
+		tf->device = ATA_DEVICE_OBS | ATA_DEV1;
+}
+
+static inline void ata_qc_reinit(struct ata_queued_cmd *qc)
+{
+	qc->dma_dir = DMA_NONE;
+	qc->sg = NULL;
+	qc->flags = 0;
+	qc->cursg = NULL;
+	qc->cursg_ofs = 0;
+	qc->nbytes = qc->extrabytes = qc->curbytes = 0;
+	qc->n_elem = 0;
+	qc->err_mask = 0;
+	qc->sect_size = ATA_SECT_SIZE;
+
+	ata_tf_init(qc->dev, &qc->tf);
+
+	/* init result_tf such that it indicates normal completion */
+	qc->result_tf.command = ATA_DRDY;
+	qc->result_tf.feature = 0;
+}
+
+static inline int ata_try_flush_cache(const struct ata_device *dev)
+{
+	return ata_id_wcache_enabled(dev->id) ||
+	       ata_id_has_flush(dev->id) ||
+	       ata_id_has_flush_ext(dev->id);
+}
+
+static inline unsigned int ac_err_mask(u8 status)
+{
+	if (status & (ATA_BUSY | ATA_DRQ))
+		return AC_ERR_HSM;
+	if (status & (ATA_ERR | ATA_DF))
+		return AC_ERR_DEV;
+	return 0;
+}
+
+static inline unsigned int __ac_err_mask(u8 status)
+{
+	unsigned int mask = ac_err_mask(status);
+	if (mask == 0)
+		return AC_ERR_OTHER;
+	return mask;
+}
+
+static inline struct ata_port *ata_shost_to_port(struct Scsi_Host *host)
+{
+	return *(struct ata_port **)&host->hostdata[0];
+}
+
+static inline int ata_check_ready(u8 status)
+{
+	if (!(status & ATA_BUSY))
+		return 1;
+
+	/* 0xff indicates either no device or device not ready */
+	if (status == 0xff)
+		return -ENODEV;
+
+	return 0;
+}
+
+static inline unsigned long ata_deadline(unsigned long from_jiffies,
+					 unsigned long timeout_msecs)
+{
+	return from_jiffies + msecs_to_jiffies(timeout_msecs);
+}
+
+/* Don't open code these in drivers as there are traps. Firstly the range may
+   change in future hardware and specs, secondly 0xFF means 'no DMA' but is
+   > UDMA_0. Dyma ddreigiau */
+
+static inline int ata_using_mwdma(struct ata_device *adev)
+{
+	if (adev->dma_mode >= XFER_MW_DMA_0 && adev->dma_mode <= XFER_MW_DMA_4)
+		return 1;
+	return 0;
+}
+
+static inline int ata_using_udma(struct ata_device *adev)
+{
+	if (adev->dma_mode >= XFER_UDMA_0 && adev->dma_mode <= XFER_UDMA_7)
+		return 1;
+	return 0;
+}
+
+static inline int ata_dma_enabled(struct ata_device *adev)
+{
+	return (adev->dma_mode == 0xFF ? 0 : 1);
+}
+
+/**************************************************************************
+ * PMP - drivers/ata/libata-pmp.c
+ */
+#ifdef CONFIG_SATA_PMP
+
+extern const struct ata_port_operations sata_pmp_port_ops;
+
+extern int sata_pmp_qc_defer_cmd_switch(struct ata_queued_cmd *qc);
+extern void sata_pmp_error_handler(struct ata_port *ap);
+
+#else /* CONFIG_SATA_PMP */
+
+#define sata_pmp_port_ops		sata_port_ops
+#define sata_pmp_qc_defer_cmd_switch	ata_std_qc_defer
+#define sata_pmp_error_handler		ata_std_error_handler
+
+#endif /* CONFIG_SATA_PMP */
+
+
+/**************************************************************************
+ * SFF - drivers/ata/libata-sff.c
+ */
+#ifdef CONFIG_ATA_SFF
+
+extern const struct ata_port_operations ata_sff_port_ops;
+extern const struct ata_port_operations ata_bmdma32_port_ops;
+
+/* PIO only, sg_tablesize and dma_boundary limits can be removed */
+#define ATA_PIO_SHT(drv_name)					\
+	ATA_BASE_SHT(drv_name),					\
+	.sg_tablesize		= LIBATA_MAX_PRD,		\
+	.dma_boundary		= ATA_DMA_BOUNDARY
+
+extern void ata_sff_dev_select(struct ata_port *ap, unsigned int device);
+extern u8 ata_sff_check_status(struct ata_port *ap);
+extern void ata_sff_pause(struct ata_port *ap);
+extern void ata_sff_dma_pause(struct ata_port *ap);
+extern int ata_sff_busy_sleep(struct ata_port *ap,
+			      unsigned long timeout_pat, unsigned long timeout);
+extern int ata_sff_wait_ready(struct ata_link *link, unsigned long deadline);
+extern void ata_sff_tf_load(struct ata_port *ap, const struct ata_taskfile *tf);
+extern void ata_sff_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
+extern void ata_sff_exec_command(struct ata_port *ap,
+				 const struct ata_taskfile *tf);
+extern unsigned int ata_sff_data_xfer(struct ata_device *dev,
+			unsigned char *buf, unsigned int buflen, int rw);
+extern unsigned int ata_sff_data_xfer32(struct ata_device *dev,
+			unsigned char *buf, unsigned int buflen, int rw);
+extern unsigned int ata_sff_data_xfer_noirq(struct ata_device *dev,
+			unsigned char *buf, unsigned int buflen, int rw);
+extern void ata_sff_irq_on(struct ata_port *ap);
+extern void ata_sff_irq_clear(struct ata_port *ap);
+extern int ata_sff_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
+			    u8 status, int in_wq);
+extern void ata_sff_queue_work(struct work_struct *work);
+extern void ata_sff_queue_delayed_work(struct delayed_work *dwork,
+		unsigned long delay);
+extern void ata_sff_queue_pio_task(struct ata_link *link, unsigned long delay);
+extern unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc);
+extern bool ata_sff_qc_fill_rtf(struct ata_queued_cmd *qc);
+extern unsigned int ata_sff_port_intr(struct ata_port *ap,
+				      struct ata_queued_cmd *qc);
+extern irqreturn_t ata_sff_interrupt(int irq, void *dev_instance);
+extern void ata_sff_lost_interrupt(struct ata_port *ap);
+extern void ata_sff_freeze(struct ata_port *ap);
+extern void ata_sff_thaw(struct ata_port *ap);
+extern int ata_sff_prereset(struct ata_link *link, unsigned long deadline);
+extern unsigned int ata_sff_dev_classify(struct ata_device *dev, int present,
+					  u8 *r_err);
+extern int ata_sff_wait_after_reset(struct ata_link *link, unsigned int devmask,
+				    unsigned long deadline);
+extern int ata_sff_softreset(struct ata_link *link, unsigned int *classes,
+			     unsigned long deadline);
+extern int sata_sff_hardreset(struct ata_link *link, unsigned int *class,
+			       unsigned long deadline);
+extern void ata_sff_postreset(struct ata_link *link, unsigned int *classes);
+extern void ata_sff_drain_fifo(struct ata_queued_cmd *qc);
+extern void ata_sff_error_handler(struct ata_port *ap);
+extern void ata_sff_std_ports(struct ata_ioports *ioaddr);
+#ifdef CONFIG_PCI
+extern int ata_pci_sff_init_host(struct ata_host *host);
+extern int ata_pci_sff_prepare_host(struct pci_dev *pdev,
+				    const struct ata_port_info * const * ppi,
+				    struct ata_host **r_host);
+extern int ata_pci_sff_activate_host(struct ata_host *host,
+				     irq_handler_t irq_handler,
+				     struct scsi_host_template *sht);
+extern int ata_pci_sff_init_one(struct pci_dev *pdev,
+		const struct ata_port_info * const * ppi,
+		struct scsi_host_template *sht, void *host_priv, int hflags);
+#endif /* CONFIG_PCI */
+
+#ifdef CONFIG_ATA_BMDMA
+
+extern const struct ata_port_operations ata_bmdma_port_ops;
+
+#define ATA_BMDMA_SHT(drv_name)					\
+	ATA_BASE_SHT(drv_name),					\
+	.sg_tablesize		= LIBATA_MAX_PRD,		\
+	.dma_boundary		= ATA_DMA_BOUNDARY
+
+extern void ata_bmdma_qc_prep(struct ata_queued_cmd *qc);
+extern unsigned int ata_bmdma_qc_issue(struct ata_queued_cmd *qc);
+extern void ata_bmdma_dumb_qc_prep(struct ata_queued_cmd *qc);
+extern unsigned int ata_bmdma_port_intr(struct ata_port *ap,
+				      struct ata_queued_cmd *qc);
+extern irqreturn_t ata_bmdma_interrupt(int irq, void *dev_instance);
+extern void ata_bmdma_error_handler(struct ata_port *ap);
+extern void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc);
+extern void ata_bmdma_irq_clear(struct ata_port *ap);
+extern void ata_bmdma_setup(struct ata_queued_cmd *qc);
+extern void ata_bmdma_start(struct ata_queued_cmd *qc);
+extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
+extern u8 ata_bmdma_status(struct ata_port *ap);
+extern int ata_bmdma_port_start(struct ata_port *ap);
+extern int ata_bmdma_port_start32(struct ata_port *ap);
+
+#ifdef CONFIG_PCI
+extern int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev);
+extern void ata_pci_bmdma_init(struct ata_host *host);
+extern int ata_pci_bmdma_prepare_host(struct pci_dev *pdev,
+				      const struct ata_port_info * const * ppi,
+				      struct ata_host **r_host);
+extern int ata_pci_bmdma_init_one(struct pci_dev *pdev,
+				  const struct ata_port_info * const * ppi,
+				  struct scsi_host_template *sht,
+				  void *host_priv, int hflags);
+#endif /* CONFIG_PCI */
+#endif /* CONFIG_ATA_BMDMA */
+
+/**
+ *	ata_sff_busy_wait - Wait for a port status register
+ *	@ap: Port to wait for.
+ *	@bits: bits that must be clear
+ *	@max: number of 10uS waits to perform
+ *
+ *	Waits up to max*10 microseconds for the selected bits in the port's
+ *	status register to be cleared.
+ *	Returns final value of status register.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+static inline u8 ata_sff_busy_wait(struct ata_port *ap, unsigned int bits,
+				   unsigned int max)
+{
+	u8 status;
+
+	do {
+		udelay(10);
+		status = ap->ops->sff_check_status(ap);
+		max--;
+	} while (status != 0xff && (status & bits) && (max > 0));
+
+	return status;
+}
+
+/**
+ *	ata_wait_idle - Wait for a port to be idle.
+ *	@ap: Port to wait for.
+ *
+ *	Waits up to 10ms for port's BUSY and DRQ signals to clear.
+ *	Returns final value of status register.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+static inline u8 ata_wait_idle(struct ata_port *ap)
+{
+	u8 status = ata_sff_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
+
+#ifdef ATA_DEBUG
+	if (status != 0xff && (status & (ATA_BUSY | ATA_DRQ)))
+		ata_port_printk(ap, KERN_DEBUG, "abnormal Status 0x%X\n",
+				status);
+#endif
+
+	return status;
+}
+#endif /* CONFIG_ATA_SFF */
+
+#endif /* __LINUX_LIBATA_H__ */
diff --git a/include/linux/libps2.h b/include/linux/libps2.h
new file mode 100644
index 00000000..79603a6c
--- /dev/null
+++ b/include/linux/libps2.h
@@ -0,0 +1,56 @@
+#ifndef _LIBPS2_H
+#define _LIBPS2_H
+
+/*
+ * Copyright (C) 1999-2002 Vojtech Pavlik
+ * Copyright (C) 2004 Dmitry Torokhov
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+
+#define PS2_CMD_GETID		0x02f2
+#define PS2_CMD_RESET_BAT	0x02ff
+
+#define PS2_RET_BAT		0xaa
+#define PS2_RET_ID		0x00
+#define PS2_RET_ACK		0xfa
+#define PS2_RET_NAK		0xfe
+#define PS2_RET_ERR		0xfc
+
+#define PS2_FLAG_ACK		1	/* Waiting for ACK/NAK */
+#define PS2_FLAG_CMD		2	/* Waiting for command to finish */
+#define PS2_FLAG_CMD1		4	/* Waiting for the first byte of command response */
+#define PS2_FLAG_WAITID		8	/* Command execiting is GET ID */
+#define PS2_FLAG_NAK		16	/* Last transmission was NAKed */
+
+struct ps2dev {
+	struct serio *serio;
+
+	/* Ensures that only one command is executing at a time */
+	struct mutex cmd_mutex;
+
+	/* Used to signal completion from interrupt handler */
+	wait_queue_head_t wait;
+
+	unsigned long flags;
+	unsigned char cmdbuf[6];
+	unsigned char cmdcnt;
+	unsigned char nak;
+};
+
+void ps2_init(struct ps2dev *ps2dev, struct serio *serio);
+int ps2_sendbyte(struct ps2dev *ps2dev, unsigned char byte, int timeout);
+void ps2_drain(struct ps2dev *ps2dev, int maxbytes, int timeout);
+void ps2_begin_command(struct ps2dev *ps2dev);
+void ps2_end_command(struct ps2dev *ps2dev);
+int __ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command);
+int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command);
+int ps2_handle_ack(struct ps2dev *ps2dev, unsigned char data);
+int ps2_handle_response(struct ps2dev *ps2dev, unsigned char data);
+void ps2_cmd_aborted(struct ps2dev *ps2dev);
+int ps2_is_keyboard_id(char id);
+
+#endif /* _LIBPS2_H */
diff --git a/include/linux/license.h b/include/linux/license.h
new file mode 100644
index 00000000..decdbf43
--- /dev/null
+++ b/include/linux/license.h
@@ -0,0 +1,14 @@
+#ifndef __LICENSE_H
+#define __LICENSE_H
+
+static inline int license_is_gpl_compatible(const char *license)
+{
+	return (strcmp(license, "GPL") == 0
+		|| strcmp(license, "GPL v2") == 0
+		|| strcmp(license, "GPL and additional rights") == 0
+		|| strcmp(license, "Dual BSD/GPL") == 0
+		|| strcmp(license, "Dual MIT/GPL") == 0
+		|| strcmp(license, "Dual MPL/GPL") == 0);
+}
+
+#endif
diff --git a/include/linux/limits.h b/include/linux/limits.h
new file mode 100644
index 00000000..2d0f9416
--- /dev/null
+++ b/include/linux/limits.h
@@ -0,0 +1,20 @@
+#ifndef _LINUX_LIMITS_H
+#define _LINUX_LIMITS_H
+
+#define NR_OPEN	        1024
+
+#define NGROUPS_MAX    65536	/* supplemental group IDs are available */
+#define ARG_MAX       131072	/* # bytes of args + environ for exec() */
+#define LINK_MAX         127	/* # links a file may have */
+#define MAX_CANON        255	/* size of the canonical input queue */
+#define MAX_INPUT        255	/* size of the type-ahead buffer */
+#define NAME_MAX         255	/* # chars in a file name */
+#define PATH_MAX        4096	/* # chars in a path name including nul */
+#define PIPE_BUF        4096	/* # bytes in atomic write to a pipe */
+#define XATTR_NAME_MAX   255	/* # chars in an extended attribute name */
+#define XATTR_SIZE_MAX 65536	/* size of an extended attribute value (64k) */
+#define XATTR_LIST_MAX 65536	/* size of extended attribute namelist (64k) */
+
+#define RTSIG_MAX	  32
+
+#endif
diff --git a/include/linux/linkage.h b/include/linux/linkage.h
new file mode 100644
index 00000000..807f1e53
--- /dev/null
+++ b/include/linux/linkage.h
@@ -0,0 +1,91 @@
+#ifndef _LINUX_LINKAGE_H
+#define _LINUX_LINKAGE_H
+
+#include <linux/compiler.h>
+#include <asm/linkage.h>
+
+#ifdef __cplusplus
+#define CPP_ASMLINKAGE extern "C"
+#else
+#define CPP_ASMLINKAGE
+#endif
+
+#ifndef asmlinkage
+#define asmlinkage CPP_ASMLINKAGE
+#endif
+
+#define __page_aligned_data	__section(.data..page_aligned) __aligned(PAGE_SIZE)
+#define __page_aligned_bss	__section(.bss..page_aligned) __aligned(PAGE_SIZE)
+
+/*
+ * For assembly routines.
+ *
+ * Note when using these that you must specify the appropriate
+ * alignment directives yourself
+ */
+#define __PAGE_ALIGNED_DATA	.section ".data..page_aligned", "aw"
+#define __PAGE_ALIGNED_BSS	.section ".bss..page_aligned", "aw"
+
+/*
+ * This is used by architectures to keep arguments on the stack
+ * untouched by the compiler by keeping them live until the end.
+ * The argument stack may be owned by the assembly-language
+ * caller, not the callee, and gcc doesn't always understand
+ * that.
+ *
+ * We have the return value, and a maximum of six arguments.
+ *
+ * This should always be followed by a "return ret" for the
+ * protection to work (ie no more work that the compiler might
+ * end up needing stack temporaries for).
+ */
+/* Assembly files may be compiled with -traditional .. */
+#ifndef __ASSEMBLY__
+#ifndef asmlinkage_protect
+# define asmlinkage_protect(n, ret, args...)	do { } while (0)
+#endif
+#endif
+
+#ifndef __ALIGN
+#define __ALIGN		.align 4,0x90
+#define __ALIGN_STR	".align 4,0x90"
+#endif
+
+#ifdef __ASSEMBLY__
+
+#ifndef LINKER_SCRIPT
+#define ALIGN __ALIGN
+#define ALIGN_STR __ALIGN_STR
+
+#ifndef ENTRY
+#define ENTRY(name) \
+  .globl name; \
+  ALIGN; \
+  name:
+#endif
+#endif /* LINKER_SCRIPT */
+
+#ifndef WEAK
+#define WEAK(name)	   \
+	.weak name;	   \
+	name:
+#endif
+
+#ifndef END
+#define END(name) \
+  .size name, .-name
+#endif
+
+/* If symbol 'name' is treated as a subroutine (gets called, and returns)
+ * then please use ENDPROC to mark 'name' as STT_FUNC for the benefit of
+ * static analysis tools such as stack depth analyzer.
+ */
+#ifndef ENDPROC
+#define ENDPROC(name) \
+  .type name, @function; \
+  END(name)
+#endif
+
+#endif
+
+#endif
diff --git a/include/linux/linux_logo.h b/include/linux/linux_logo.h
new file mode 100644
index 00000000..ca5bd91d
--- /dev/null
+++ b/include/linux/linux_logo.h
@@ -0,0 +1,61 @@
+#ifndef _LINUX_LINUX_LOGO_H
+#define _LINUX_LINUX_LOGO_H
+
+/*
+ *  Linux logo to be displayed on boot
+ *
+ *  Copyright (C) 1996 Larry Ewing (lewing@isc.tamu.edu)
+ *  Copyright (C) 1996,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ *  Copyright (C) 2001 Greg Banks <gnb@alphalink.com.au>
+ *  Copyright (C) 2001 Jan-Benedict Glaw <jbglaw@lug-owl.de>
+ *  Copyright (C) 2003 Geert Uytterhoeven <geert@linux-m68k.org>
+ *
+ *  Serial_console ascii image can be any size,
+ *  but should contain %s to display the version
+ */
+
+#include <linux/init.h>
+
+
+#define LINUX_LOGO_MONO		1	/* monochrome black/white */
+#define LINUX_LOGO_VGA16	2	/* 16 colors VGA text palette */
+#define LINUX_LOGO_CLUT224	3	/* 224 colors */
+#define LINUX_LOGO_GRAY256	4	/* 256 levels grayscale */
+
+
+struct linux_logo {
+	int type;			/* one of LINUX_LOGO_* */
+	unsigned int width;
+	unsigned int height;
+	unsigned int clutsize;		/* LINUX_LOGO_CLUT224 only */
+	const unsigned char *clut;	/* LINUX_LOGO_CLUT224 only */
+	const unsigned char *data;
+};
+
+extern const struct linux_logo logo_linux_mono;
+extern const struct linux_logo logo_linux_vga16;
+extern const struct linux_logo logo_linux_clut224;
+extern const struct linux_logo logo_blackfin_vga16;
+extern const struct linux_logo logo_blackfin_clut224;
+extern const struct linux_logo logo_dec_clut224;
+extern const struct linux_logo logo_mac_clut224;
+extern const struct linux_logo logo_parisc_clut224;
+extern const struct linux_logo logo_sgi_clut224;
+extern const struct linux_logo logo_sun_clut224;
+extern const struct linux_logo logo_superh_mono;
+extern const struct linux_logo logo_superh_vga16;
+extern const struct linux_logo logo_superh_clut224;
+extern const struct linux_logo logo_m32r_clut224;
+extern const struct linux_logo logo_spe_clut224;
+
+extern const struct linux_logo *fb_find_logo(int depth);
+#ifdef CONFIG_FB_LOGO_EXTRA
+extern void fb_append_extra_logo(const struct linux_logo *logo,
+				 unsigned int n);
+#else
+static inline void fb_append_extra_logo(const struct linux_logo *logo,
+					unsigned int n)
+{}
+#endif
+
+#endif /* _LINUX_LINUX_LOGO_H */
diff --git a/include/linux/lis3lv02d.h b/include/linux/lis3lv02d.h
new file mode 100644
index 00000000..f1664c63
--- /dev/null
+++ b/include/linux/lis3lv02d.h
@@ -0,0 +1,127 @@
+#ifndef __LIS3LV02D_H_
+#define __LIS3LV02D_H_
+
+/**
+ * struct lis3lv02d_platform_data - lis3 chip family platform data
+ * @click_flags:	Click detection unit configuration
+ * @click_thresh_x:	Click detection unit x axis threshold
+ * @click_thresh_y:	Click detection unit y axis threshold
+ * @click_thresh_z:	Click detection unit z axis threshold
+ * @click_time_limit:	Click detection unit time parameter
+ * @click_latency:	Click detection unit latency parameter
+ * @click_window:	Click detection unit window parameter
+ * @irq_cfg:		On chip irq source and type configuration (click /
+ *			data available / wake up, open drain, polarity)
+ * @irq_flags1:		Additional irq triggering flags for irq channel 0
+ * @irq_flags2:		Additional irq triggering flags for irq channel 1
+ * @duration1:		Wake up unit 1 duration parameter
+ * @duration2:		Wake up unit 2 duration parameter
+ * @wakeup_flags:	Wake up unit 1 flags
+ * @wakeup_thresh:	Wake up unit 1 threshold value
+ * @wakeup_flags2:	Wake up unit 2 flags
+ * @wakeup_thresh2:	Wake up unit 2 threshold value
+ * @hipass_ctrl:	High pass filter control (enable / disable, cut off
+ *			frequency)
+ * @axis_x:		Sensor orientation remapping for x-axis
+ * @axis_y:		Sensor orientation remapping for y-axis
+ * @axis_z:		Sensor orientation remapping for z-axis
+ * @driver_features:	Enable bits for different features. Disabled by default
+ * @default_rate:	Default sampling rate. 0 means reset default
+ * @setup_resources:	Interrupt line setup call back function
+ * @release_resources:	Interrupt line release call back function
+ * @st_min_limits[3]:	Selftest acceptance minimum values
+ * @st_max_limits[3]:	Selftest acceptance maximum values
+ * @irq2:		Irq line 2 number
+ *
+ * Platform data is used to setup the sensor chip. Meaning of the different
+ * chip features can be found from the data sheet. It is publicly available
+ * at www.st.com web pages. Currently the platform data is used
+ * only for the 8 bit device. The 8 bit device has two wake up / free fall
+ * detection units and click detection unit. There are plenty of ways to
+ * configure the chip which makes is quite hard to explain deeper meaning of
+ * the fields here. Behaviour of the detection blocks varies heavily depending
+ * on the configuration. For example, interrupt detection block can use high
+ * pass filtered data which makes it react to the changes in the acceleration.
+ * Irq_flags can be used to enable interrupt detection on the both edges.
+ * With proper chip configuration this produces interrupt when some trigger
+ * starts and when it goes away.
+ */
+
+struct lis3lv02d_platform_data {
+	/* please note: the 'click' feature is only supported for
+	 * LIS[32]02DL variants of the chip and will be ignored for
+	 * others */
+#define LIS3_CLICK_SINGLE_X	(1 << 0)
+#define LIS3_CLICK_DOUBLE_X	(1 << 1)
+#define LIS3_CLICK_SINGLE_Y	(1 << 2)
+#define LIS3_CLICK_DOUBLE_Y	(1 << 3)
+#define LIS3_CLICK_SINGLE_Z	(1 << 4)
+#define LIS3_CLICK_DOUBLE_Z	(1 << 5)
+	unsigned char click_flags;
+	unsigned char click_thresh_x;
+	unsigned char click_thresh_y;
+	unsigned char click_thresh_z;
+	unsigned char click_time_limit;
+	unsigned char click_latency;
+	unsigned char click_window;
+
+#define LIS3_IRQ1_DISABLE	(0 << 0)
+#define LIS3_IRQ1_FF_WU_1	(1 << 0)
+#define LIS3_IRQ1_FF_WU_2	(2 << 0)
+#define LIS3_IRQ1_FF_WU_12	(3 << 0)
+#define LIS3_IRQ1_DATA_READY	(4 << 0)
+#define LIS3_IRQ1_CLICK		(7 << 0)
+#define LIS3_IRQ1_MASK		(7 << 0)
+#define LIS3_IRQ2_DISABLE	(0 << 3)
+#define LIS3_IRQ2_FF_WU_1	(1 << 3)
+#define LIS3_IRQ2_FF_WU_2	(2 << 3)
+#define LIS3_IRQ2_FF_WU_12	(3 << 3)
+#define LIS3_IRQ2_DATA_READY	(4 << 3)
+#define LIS3_IRQ2_CLICK		(7 << 3)
+#define LIS3_IRQ2_MASK		(7 << 3)
+#define LIS3_IRQ_OPEN_DRAIN	(1 << 6)
+#define LIS3_IRQ_ACTIVE_LOW	(1 << 7)
+	unsigned char irq_cfg;
+	unsigned char irq_flags1; /* Additional irq edge / level flags */
+	unsigned char irq_flags2; /* Additional irq edge / level flags */
+	unsigned char duration1;
+	unsigned char duration2;
+#define LIS3_WAKEUP_X_LO	(1 << 0)
+#define LIS3_WAKEUP_X_HI	(1 << 1)
+#define LIS3_WAKEUP_Y_LO	(1 << 2)
+#define LIS3_WAKEUP_Y_HI	(1 << 3)
+#define LIS3_WAKEUP_Z_LO	(1 << 4)
+#define LIS3_WAKEUP_Z_HI	(1 << 5)
+	unsigned char wakeup_flags;
+	unsigned char wakeup_thresh;
+	unsigned char wakeup_flags2;
+	unsigned char wakeup_thresh2;
+#define LIS3_HIPASS_CUTFF_8HZ   0
+#define LIS3_HIPASS_CUTFF_4HZ   1
+#define LIS3_HIPASS_CUTFF_2HZ   2
+#define LIS3_HIPASS_CUTFF_1HZ   3
+#define LIS3_HIPASS1_DISABLE    (1 << 2)
+#define LIS3_HIPASS2_DISABLE    (1 << 3)
+	unsigned char hipass_ctrl;
+#define LIS3_NO_MAP		0
+#define LIS3_DEV_X		1
+#define LIS3_DEV_Y		2
+#define LIS3_DEV_Z		3
+#define LIS3_INV_DEV_X	       -1
+#define LIS3_INV_DEV_Y	       -2
+#define LIS3_INV_DEV_Z	       -3
+	s8 axis_x;
+	s8 axis_y;
+	s8 axis_z;
+#define LIS3_USE_BLOCK_READ	0x02
+	u16 driver_features;
+	int default_rate;
+	int (*setup_resources)(void);
+	int (*release_resources)(void);
+	/* Limits for selftest are specified in chip data sheet */
+	s16 st_min_limits[3]; /* min pass limit x, y, z */
+	s16 st_max_limits[3]; /* max pass limit x, y, z */
+	int irq2;
+};
+
+#endif /* __LIS3LV02D_H_ */
diff --git a/include/linux/list.h b/include/linux/list.h
new file mode 100644
index 00000000..cc6d2aa6
--- /dev/null
+++ b/include/linux/list.h
@@ -0,0 +1,719 @@
+#ifndef _LINUX_LIST_H
+#define _LINUX_LIST_H
+
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <linux/poison.h>
+#include <linux/const.h>
+
+/*
+ * Simple doubly linked list implementation.
+ *
+ * Some of the internal functions ("__xxx") are useful when
+ * manipulating whole lists rather than single entries, as
+ * sometimes we already know the next/prev entries and we can
+ * generate better code by using them directly rather than
+ * using the generic single-entry routines.
+ */
+
+#define LIST_HEAD_INIT(name) { &(name), &(name) }
+
+#define LIST_HEAD(name) \
+	struct list_head name = LIST_HEAD_INIT(name)
+
+static inline void INIT_LIST_HEAD(struct list_head *list)
+{
+	list->next = list;
+	list->prev = list;
+}
+
+/*
+ * Insert a new entry between two known consecutive entries.
+ *
+ * This is only for internal list manipulation where we know
+ * the prev/next entries already!
+ */
+#ifndef CONFIG_DEBUG_LIST
+static inline void __list_add(struct list_head *new,
+			      struct list_head *prev,
+			      struct list_head *next)
+{
+	next->prev = new;
+	new->next = next;
+	new->prev = prev;
+	prev->next = new;
+}
+#else
+extern void __list_add(struct list_head *new,
+			      struct list_head *prev,
+			      struct list_head *next);
+#endif
+
+/**
+ * list_add - add a new entry
+ * @new: new entry to be added
+ * @head: list head to add it after
+ *
+ * Insert a new entry after the specified head.
+ * This is good for implementing stacks.
+ */
+static inline void list_add(struct list_head *new, struct list_head *head)
+{
+	__list_add(new, head, head->next);
+}
+
+
+/**
+ * list_add_tail - add a new entry
+ * @new: new entry to be added
+ * @head: list head to add it before
+ *
+ * Insert a new entry before the specified head.
+ * This is useful for implementing queues.
+ */
+static inline void list_add_tail(struct list_head *new, struct list_head *head)
+{
+	__list_add(new, head->prev, head);
+}
+
+/*
+ * Delete a list entry by making the prev/next entries
+ * point to each other.
+ *
+ * This is only for internal list manipulation where we know
+ * the prev/next entries already!
+ */
+static inline void __list_del(struct list_head * prev, struct list_head * next)
+{
+	next->prev = prev;
+	prev->next = next;
+}
+
+/**
+ * list_del - deletes entry from list.
+ * @entry: the element to delete from the list.
+ * Note: list_empty() on entry does not return true after this, the entry is
+ * in an undefined state.
+ */
+#ifndef CONFIG_DEBUG_LIST
+static inline void __list_del_entry(struct list_head *entry)
+{
+	__list_del(entry->prev, entry->next);
+}
+
+static inline void list_del(struct list_head *entry)
+{
+	__list_del(entry->prev, entry->next);
+	entry->next = LIST_POISON1;
+	entry->prev = LIST_POISON2;
+}
+#else
+extern void __list_del_entry(struct list_head *entry);
+extern void list_del(struct list_head *entry);
+#endif
+
+/**
+ * list_replace - replace old entry by new one
+ * @old : the element to be replaced
+ * @new : the new element to insert
+ *
+ * If @old was empty, it will be overwritten.
+ */
+static inline void list_replace(struct list_head *old,
+				struct list_head *new)
+{
+	new->next = old->next;
+	new->next->prev = new;
+	new->prev = old->prev;
+	new->prev->next = new;
+}
+
+static inline void list_replace_init(struct list_head *old,
+					struct list_head *new)
+{
+	list_replace(old, new);
+	INIT_LIST_HEAD(old);
+}
+
+/**
+ * list_del_init - deletes entry from list and reinitialize it.
+ * @entry: the element to delete from the list.
+ */
+static inline void list_del_init(struct list_head *entry)
+{
+	__list_del_entry(entry);
+	INIT_LIST_HEAD(entry);
+}
+
+/**
+ * list_move - delete from one list and add as another's head
+ * @list: the entry to move
+ * @head: the head that will precede our entry
+ */
+static inline void list_move(struct list_head *list, struct list_head *head)
+{
+	__list_del_entry(list);
+	list_add(list, head);
+}
+
+/**
+ * list_move_tail - delete from one list and add as another's tail
+ * @list: the entry to move
+ * @head: the head that will follow our entry
+ */
+static inline void list_move_tail(struct list_head *list,
+				  struct list_head *head)
+{
+	__list_del_entry(list);
+	list_add_tail(list, head);
+}
+
+/**
+ * list_is_last - tests whether @list is the last entry in list @head
+ * @list: the entry to test
+ * @head: the head of the list
+ */
+static inline int list_is_last(const struct list_head *list,
+				const struct list_head *head)
+{
+	return list->next == head;
+}
+
+/**
+ * list_empty - tests whether a list is empty
+ * @head: the list to test.
+ */
+static inline int list_empty(const struct list_head *head)
+{
+	return head->next == head;
+}
+
+/**
+ * list_empty_careful - tests whether a list is empty and not being modified
+ * @head: the list to test
+ *
+ * Description:
+ * tests whether a list is empty _and_ checks that no other CPU might be
+ * in the process of modifying either member (next or prev)
+ *
+ * NOTE: using list_empty_careful() without synchronization
+ * can only be safe if the only activity that can happen
+ * to the list entry is list_del_init(). Eg. it cannot be used
+ * if another CPU could re-list_add() it.
+ */
+static inline int list_empty_careful(const struct list_head *head)
+{
+	struct list_head *next = head->next;
+	return (next == head) && (next == head->prev);
+}
+
+/**
+ * list_rotate_left - rotate the list to the left
+ * @head: the head of the list
+ */
+static inline void list_rotate_left(struct list_head *head)
+{
+	struct list_head *first;
+
+	if (!list_empty(head)) {
+		first = head->next;
+		list_move_tail(first, head);
+	}
+}
+
+/**
+ * list_is_singular - tests whether a list has just one entry.
+ * @head: the list to test.
+ */
+static inline int list_is_singular(const struct list_head *head)
+{
+	return !list_empty(head) && (head->next == head->prev);
+}
+
+static inline void __list_cut_position(struct list_head *list,
+		struct list_head *head, struct list_head *entry)
+{
+	struct list_head *new_first = entry->next;
+	list->next = head->next;
+	list->next->prev = list;
+	list->prev = entry;
+	entry->next = list;
+	head->next = new_first;
+	new_first->prev = head;
+}
+
+/**
+ * list_cut_position - cut a list into two
+ * @list: a new list to add all removed entries
+ * @head: a list with entries
+ * @entry: an entry within head, could be the head itself
+ *	and if so we won't cut the list
+ *
+ * This helper moves the initial part of @head, up to and
+ * including @entry, from @head to @list. You should
+ * pass on @entry an element you know is on @head. @list
+ * should be an empty list or a list you do not care about
+ * losing its data.
+ *
+ */
+static inline void list_cut_position(struct list_head *list,
+		struct list_head *head, struct list_head *entry)
+{
+	if (list_empty(head))
+		return;
+	if (list_is_singular(head) &&
+		(head->next != entry && head != entry))
+		return;
+	if (entry == head)
+		INIT_LIST_HEAD(list);
+	else
+		__list_cut_position(list, head, entry);
+}
+
+static inline void __list_splice(const struct list_head *list,
+				 struct list_head *prev,
+				 struct list_head *next)
+{
+	struct list_head *first = list->next;
+	struct list_head *last = list->prev;
+
+	first->prev = prev;
+	prev->next = first;
+
+	last->next = next;
+	next->prev = last;
+}
+
+/**
+ * list_splice - join two lists, this is designed for stacks
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ */
+static inline void list_splice(const struct list_head *list,
+				struct list_head *head)
+{
+	if (!list_empty(list))
+		__list_splice(list, head, head->next);
+}
+
+/**
+ * list_splice_tail - join two lists, each list being a queue
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ */
+static inline void list_splice_tail(struct list_head *list,
+				struct list_head *head)
+{
+	if (!list_empty(list))
+		__list_splice(list, head->prev, head);
+}
+
+/**
+ * list_splice_init - join two lists and reinitialise the emptied list.
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ *
+ * The list at @list is reinitialised
+ */
+static inline void list_splice_init(struct list_head *list,
+				    struct list_head *head)
+{
+	if (!list_empty(list)) {
+		__list_splice(list, head, head->next);
+		INIT_LIST_HEAD(list);
+	}
+}
+
+/**
+ * list_splice_tail_init - join two lists and reinitialise the emptied list
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ *
+ * Each of the lists is a queue.
+ * The list at @list is reinitialised
+ */
+static inline void list_splice_tail_init(struct list_head *list,
+					 struct list_head *head)
+{
+	if (!list_empty(list)) {
+		__list_splice(list, head->prev, head);
+		INIT_LIST_HEAD(list);
+	}
+}
+
+/**
+ * list_entry - get the struct for this entry
+ * @ptr:	the &struct list_head pointer.
+ * @type:	the type of the struct this is embedded in.
+ * @member:	the name of the list_struct within the struct.
+ */
+#define list_entry(ptr, type, member) \
+	container_of(ptr, type, member)
+
+/**
+ * list_first_entry - get the first element from a list
+ * @ptr:	the list head to take the element from.
+ * @type:	the type of the struct this is embedded in.
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Note, that list is expected to be not empty.
+ */
+#define list_first_entry(ptr, type, member) \
+	list_entry((ptr)->next, type, member)
+
+/**
+ * list_for_each	-	iterate over a list
+ * @pos:	the &struct list_head to use as a loop cursor.
+ * @head:	the head for your list.
+ */
+#define list_for_each(pos, head) \
+	for (pos = (head)->next; pos != (head); pos = pos->next)
+
+/**
+ * __list_for_each	-	iterate over a list
+ * @pos:	the &struct list_head to use as a loop cursor.
+ * @head:	the head for your list.
+ *
+ * This variant doesn't differ from list_for_each() any more.
+ * We don't do prefetching in either case.
+ */
+#define __list_for_each(pos, head) \
+	for (pos = (head)->next; pos != (head); pos = pos->next)
+
+/**
+ * list_for_each_prev	-	iterate over a list backwards
+ * @pos:	the &struct list_head to use as a loop cursor.
+ * @head:	the head for your list.
+ */
+#define list_for_each_prev(pos, head) \
+	for (pos = (head)->prev; pos != (head); pos = pos->prev)
+
+/**
+ * list_for_each_safe - iterate over a list safe against removal of list entry
+ * @pos:	the &struct list_head to use as a loop cursor.
+ * @n:		another &struct list_head to use as temporary storage
+ * @head:	the head for your list.
+ */
+#define list_for_each_safe(pos, n, head) \
+	for (pos = (head)->next, n = pos->next; pos != (head); \
+		pos = n, n = pos->next)
+
+/**
+ * list_for_each_prev_safe - iterate over a list backwards safe against removal of list entry
+ * @pos:	the &struct list_head to use as a loop cursor.
+ * @n:		another &struct list_head to use as temporary storage
+ * @head:	the head for your list.
+ */
+#define list_for_each_prev_safe(pos, n, head) \
+	for (pos = (head)->prev, n = pos->prev; \
+	     pos != (head); \
+	     pos = n, n = pos->prev)
+
+/**
+ * list_for_each_entry	-	iterate over list of given type
+ * @pos:	the type * to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ */
+#define list_for_each_entry(pos, head, member)				\
+	for (pos = list_entry((head)->next, typeof(*pos), member);	\
+	     &pos->member != (head); 	\
+	     pos = list_entry(pos->member.next, typeof(*pos), member))
+
+/**
+ * list_for_each_entry_reverse - iterate backwards over list of given type.
+ * @pos:	the type * to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ */
+#define list_for_each_entry_reverse(pos, head, member)			\
+	for (pos = list_entry((head)->prev, typeof(*pos), member);	\
+	     &pos->member != (head); 	\
+	     pos = list_entry(pos->member.prev, typeof(*pos), member))
+
+/**
+ * list_prepare_entry - prepare a pos entry for use in list_for_each_entry_continue()
+ * @pos:	the type * to use as a start point
+ * @head:	the head of the list
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Prepares a pos entry for use as a start point in list_for_each_entry_continue().
+ */
+#define list_prepare_entry(pos, head, member) \
+	((pos) ? : list_entry(head, typeof(*pos), member))
+
+/**
+ * list_for_each_entry_continue - continue iteration over list of given type
+ * @pos:	the type * to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Continue to iterate over list of given type, continuing after
+ * the current position.
+ */
+#define list_for_each_entry_continue(pos, head, member) 		\
+	for (pos = list_entry(pos->member.next, typeof(*pos), member);	\
+	     &pos->member != (head);	\
+	     pos = list_entry(pos->member.next, typeof(*pos), member))
+
+/**
+ * list_for_each_entry_continue_reverse - iterate backwards from the given point
+ * @pos:	the type * to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Start to iterate over list of given type backwards, continuing after
+ * the current position.
+ */
+#define list_for_each_entry_continue_reverse(pos, head, member)		\
+	for (pos = list_entry(pos->member.prev, typeof(*pos), member);	\
+	     &pos->member != (head);	\
+	     pos = list_entry(pos->member.prev, typeof(*pos), member))
+
+/**
+ * list_for_each_entry_from - iterate over list of given type from the current point
+ * @pos:	the type * to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Iterate over list of given type, continuing from current position.
+ */
+#define list_for_each_entry_from(pos, head, member) 			\
+	for (; &pos->member != (head);	\
+	     pos = list_entry(pos->member.next, typeof(*pos), member))
+
+/**
+ * list_for_each_entry_safe - iterate over list of given type safe against removal of list entry
+ * @pos:	the type * to use as a loop cursor.
+ * @n:		another type * to use as temporary storage
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ */
+#define list_for_each_entry_safe(pos, n, head, member)			\
+	for (pos = list_entry((head)->next, typeof(*pos), member),	\
+		n = list_entry(pos->member.next, typeof(*pos), member);	\
+	     &pos->member != (head); 					\
+	     pos = n, n = list_entry(n->member.next, typeof(*n), member))
+
+/**
+ * list_for_each_entry_safe_continue - continue list iteration safe against removal
+ * @pos:	the type * to use as a loop cursor.
+ * @n:		another type * to use as temporary storage
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Iterate over list of given type, continuing after current point,
+ * safe against removal of list entry.
+ */
+#define list_for_each_entry_safe_continue(pos, n, head, member) 		\
+	for (pos = list_entry(pos->member.next, typeof(*pos), member), 		\
+		n = list_entry(pos->member.next, typeof(*pos), member);		\
+	     &pos->member != (head);						\
+	     pos = n, n = list_entry(n->member.next, typeof(*n), member))
+
+/**
+ * list_for_each_entry_safe_from - iterate over list from current point safe against removal
+ * @pos:	the type * to use as a loop cursor.
+ * @n:		another type * to use as temporary storage
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Iterate over list of given type from current point, safe against
+ * removal of list entry.
+ */
+#define list_for_each_entry_safe_from(pos, n, head, member) 			\
+	for (n = list_entry(pos->member.next, typeof(*pos), member);		\
+	     &pos->member != (head);						\
+	     pos = n, n = list_entry(n->member.next, typeof(*n), member))
+
+/**
+ * list_for_each_entry_safe_reverse - iterate backwards over list safe against removal
+ * @pos:	the type * to use as a loop cursor.
+ * @n:		another type * to use as temporary storage
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Iterate backwards over list of given type, safe against removal
+ * of list entry.
+ */
+#define list_for_each_entry_safe_reverse(pos, n, head, member)		\
+	for (pos = list_entry((head)->prev, typeof(*pos), member),	\
+		n = list_entry(pos->member.prev, typeof(*pos), member);	\
+	     &pos->member != (head); 					\
+	     pos = n, n = list_entry(n->member.prev, typeof(*n), member))
+
+/**
+ * list_safe_reset_next - reset a stale list_for_each_entry_safe loop
+ * @pos:	the loop cursor used in the list_for_each_entry_safe loop
+ * @n:		temporary storage used in list_for_each_entry_safe
+ * @member:	the name of the list_struct within the struct.
+ *
+ * list_safe_reset_next is not safe to use in general if the list may be
+ * modified concurrently (eg. the lock is dropped in the loop body). An
+ * exception to this is if the cursor element (pos) is pinned in the list,
+ * and list_safe_reset_next is called after re-taking the lock and before
+ * completing the current iteration of the loop body.
+ */
+#define list_safe_reset_next(pos, n, member)				\
+	n = list_entry(pos->member.next, typeof(*pos), member)
+
+/*
+ * Double linked lists with a single pointer list head.
+ * Mostly useful for hash tables where the two pointer list head is
+ * too wasteful.
+ * You lose the ability to access the tail in O(1).
+ */
+
+#define HLIST_HEAD_INIT { .first = NULL }
+#define HLIST_HEAD(name) struct hlist_head name = {  .first = NULL }
+#define INIT_HLIST_HEAD(ptr) ((ptr)->first = NULL)
+static inline void INIT_HLIST_NODE(struct hlist_node *h)
+{
+	h->next = NULL;
+	h->pprev = NULL;
+}
+
+static inline int hlist_unhashed(const struct hlist_node *h)
+{
+	return !h->pprev;
+}
+
+static inline int hlist_empty(const struct hlist_head *h)
+{
+	return !h->first;
+}
+
+static inline void __hlist_del(struct hlist_node *n)
+{
+	struct hlist_node *next = n->next;
+	struct hlist_node **pprev = n->pprev;
+	*pprev = next;
+	if (next)
+		next->pprev = pprev;
+}
+
+static inline void hlist_del(struct hlist_node *n)
+{
+	__hlist_del(n);
+	n->next = LIST_POISON1;
+	n->pprev = LIST_POISON2;
+}
+
+static inline void hlist_del_init(struct hlist_node *n)
+{
+	if (!hlist_unhashed(n)) {
+		__hlist_del(n);
+		INIT_HLIST_NODE(n);
+	}
+}
+
+static inline void hlist_add_head(struct hlist_node *n, struct hlist_head *h)
+{
+	struct hlist_node *first = h->first;
+	n->next = first;
+	if (first)
+		first->pprev = &n->next;
+	h->first = n;
+	n->pprev = &h->first;
+}
+
+/* next must be != NULL */
+static inline void hlist_add_before(struct hlist_node *n,
+					struct hlist_node *next)
+{
+	n->pprev = next->pprev;
+	n->next = next;
+	next->pprev = &n->next;
+	*(n->pprev) = n;
+}
+
+static inline void hlist_add_after(struct hlist_node *n,
+					struct hlist_node *next)
+{
+	next->next = n->next;
+	n->next = next;
+	next->pprev = &n->next;
+
+	if(next->next)
+		next->next->pprev  = &next->next;
+}
+
+/* after that we'll appear to be on some hlist and hlist_del will work */
+static inline void hlist_add_fake(struct hlist_node *n)
+{
+	n->pprev = &n->next;
+}
+
+/*
+ * Move a list from one list head to another. Fixup the pprev
+ * reference of the first entry if it exists.
+ */
+static inline void hlist_move_list(struct hlist_head *old,
+				   struct hlist_head *new)
+{
+	new->first = old->first;
+	if (new->first)
+		new->first->pprev = &new->first;
+	old->first = NULL;
+}
+
+#define hlist_entry(ptr, type, member) container_of(ptr,type,member)
+
+#define hlist_for_each(pos, head) \
+	for (pos = (head)->first; pos ; pos = pos->next)
+
+#define hlist_for_each_safe(pos, n, head) \
+	for (pos = (head)->first; pos && ({ n = pos->next; 1; }); \
+	     pos = n)
+
+/**
+ * hlist_for_each_entry	- iterate over list of given type
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the hlist_node within the struct.
+ */
+#define hlist_for_each_entry(tpos, pos, head, member)			 \
+	for (pos = (head)->first;					 \
+	     pos &&							 \
+		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
+	     pos = pos->next)
+
+/**
+ * hlist_for_each_entry_continue - iterate over a hlist continuing after current point
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
+ * @member:	the name of the hlist_node within the struct.
+ */
+#define hlist_for_each_entry_continue(tpos, pos, member)		 \
+	for (pos = (pos)->next;						 \
+	     pos &&							 \
+		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
+	     pos = pos->next)
+
+/**
+ * hlist_for_each_entry_from - iterate over a hlist continuing from current point
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
+ * @member:	the name of the hlist_node within the struct.
+ */
+#define hlist_for_each_entry_from(tpos, pos, member)			 \
+	for (; pos &&							 \
+		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
+	     pos = pos->next)
+
+/**
+ * hlist_for_each_entry_safe - iterate over list of given type safe against removal of list entry
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
+ * @n:		another &struct hlist_node to use as temporary storage
+ * @head:	the head for your list.
+ * @member:	the name of the hlist_node within the struct.
+ */
+#define hlist_for_each_entry_safe(tpos, pos, n, head, member) 		 \
+	for (pos = (head)->first;					 \
+	     pos && ({ n = pos->next; 1; }) && 				 \
+		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
+	     pos = n)
+
+#endif
diff --git a/include/linux/list_bl.h b/include/linux/list_bl.h
new file mode 100644
index 00000000..31f9d75a
--- /dev/null
+++ b/include/linux/list_bl.h
@@ -0,0 +1,156 @@
+#ifndef _LINUX_LIST_BL_H
+#define _LINUX_LIST_BL_H
+
+#include <linux/list.h>
+#include <linux/bit_spinlock.h>
+
+/*
+ * Special version of lists, where head of the list has a lock in the lowest
+ * bit. This is useful for scalable hash tables without increasing memory
+ * footprint overhead.
+ *
+ * For modification operations, the 0 bit of hlist_bl_head->first
+ * pointer must be set.
+ *
+ * With some small modifications, this can easily be adapted to store several
+ * arbitrary bits (not just a single lock bit), if the need arises to store
+ * some fast and compact auxiliary data.
+ */
+
+#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
+#define LIST_BL_LOCKMASK	1UL
+#else
+#define LIST_BL_LOCKMASK	0UL
+#endif
+
+#ifdef CONFIG_DEBUG_LIST
+#define LIST_BL_BUG_ON(x) BUG_ON(x)
+#else
+#define LIST_BL_BUG_ON(x)
+#endif
+
+
+struct hlist_bl_head {
+	struct hlist_bl_node *first;
+};
+
+struct hlist_bl_node {
+	struct hlist_bl_node *next, **pprev;
+};
+#define INIT_HLIST_BL_HEAD(ptr) \
+	((ptr)->first = NULL)
+
+static inline void INIT_HLIST_BL_NODE(struct hlist_bl_node *h)
+{
+	h->next = NULL;
+	h->pprev = NULL;
+}
+
+#define hlist_bl_entry(ptr, type, member) container_of(ptr,type,member)
+
+static inline int hlist_bl_unhashed(const struct hlist_bl_node *h)
+{
+	return !h->pprev;
+}
+
+static inline struct hlist_bl_node *hlist_bl_first(struct hlist_bl_head *h)
+{
+	return (struct hlist_bl_node *)
+		((unsigned long)h->first & ~LIST_BL_LOCKMASK);
+}
+
+static inline void hlist_bl_set_first(struct hlist_bl_head *h,
+					struct hlist_bl_node *n)
+{
+	LIST_BL_BUG_ON((unsigned long)n & LIST_BL_LOCKMASK);
+	LIST_BL_BUG_ON(((unsigned long)h->first & LIST_BL_LOCKMASK) !=
+							LIST_BL_LOCKMASK);
+	h->first = (struct hlist_bl_node *)((unsigned long)n | LIST_BL_LOCKMASK);
+}
+
+static inline int hlist_bl_empty(const struct hlist_bl_head *h)
+{
+	return !((unsigned long)h->first & ~LIST_BL_LOCKMASK);
+}
+
+static inline void hlist_bl_add_head(struct hlist_bl_node *n,
+					struct hlist_bl_head *h)
+{
+	struct hlist_bl_node *first = hlist_bl_first(h);
+
+	n->next = first;
+	if (first)
+		first->pprev = &n->next;
+	n->pprev = &h->first;
+	hlist_bl_set_first(h, n);
+}
+
+static inline void __hlist_bl_del(struct hlist_bl_node *n)
+{
+	struct hlist_bl_node *next = n->next;
+	struct hlist_bl_node **pprev = n->pprev;
+
+	LIST_BL_BUG_ON((unsigned long)n & LIST_BL_LOCKMASK);
+
+	/* pprev may be `first`, so be careful not to lose the lock bit */
+	*pprev = (struct hlist_bl_node *)
+			((unsigned long)next |
+			 ((unsigned long)*pprev & LIST_BL_LOCKMASK));
+	if (next)
+		next->pprev = pprev;
+}
+
+static inline void hlist_bl_del(struct hlist_bl_node *n)
+{
+	__hlist_bl_del(n);
+	n->next = LIST_POISON1;
+	n->pprev = LIST_POISON2;
+}
+
+static inline void hlist_bl_del_init(struct hlist_bl_node *n)
+{
+	if (!hlist_bl_unhashed(n)) {
+		__hlist_bl_del(n);
+		INIT_HLIST_BL_NODE(n);
+	}
+}
+
+static inline void hlist_bl_lock(struct hlist_bl_head *b)
+{
+	bit_spin_lock(0, (unsigned long *)b);
+}
+
+static inline void hlist_bl_unlock(struct hlist_bl_head *b)
+{
+	__bit_spin_unlock(0, (unsigned long *)b);
+}
+
+/**
+ * hlist_bl_for_each_entry	- iterate over list of given type
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the hlist_node within the struct.
+ *
+ */
+#define hlist_bl_for_each_entry(tpos, pos, head, member)		\
+	for (pos = hlist_bl_first(head);				\
+	     pos &&							\
+		({ tpos = hlist_bl_entry(pos, typeof(*tpos), member); 1;}); \
+	     pos = pos->next)
+
+/**
+ * hlist_bl_for_each_entry_safe - iterate over list of given type safe against removal of list entry
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
+ * @n:		another &struct hlist_node to use as temporary storage
+ * @head:	the head for your list.
+ * @member:	the name of the hlist_node within the struct.
+ */
+#define hlist_bl_for_each_entry_safe(tpos, pos, n, head, member)	 \
+	for (pos = hlist_bl_first(head);				 \
+	     pos && ({ n = pos->next; 1; }) && 				 \
+		({ tpos = hlist_bl_entry(pos, typeof(*tpos), member); 1;}); \
+	     pos = n)
+
+#endif
diff --git a/include/linux/list_nulls.h b/include/linux/list_nulls.h
new file mode 100644
index 00000000..5d10ae36
--- /dev/null
+++ b/include/linux/list_nulls.h
@@ -0,0 +1,112 @@
+#ifndef _LINUX_LIST_NULLS_H
+#define _LINUX_LIST_NULLS_H
+
+/*
+ * Special version of lists, where end of list is not a NULL pointer,
+ * but a 'nulls' marker, which can have many different values.
+ * (up to 2^31 different values guaranteed on all platforms)
+ *
+ * In the standard hlist, termination of a list is the NULL pointer.
+ * In this special 'nulls' variant, we use the fact that objects stored in
+ * a list are aligned on a word (4 or 8 bytes alignment).
+ * We therefore use the last significant bit of 'ptr' :
+ * Set to 1 : This is a 'nulls' end-of-list marker (ptr >> 1)
+ * Set to 0 : This is a pointer to some object (ptr)
+ */
+
+struct hlist_nulls_head {
+	struct hlist_nulls_node *first;
+};
+
+struct hlist_nulls_node {
+	struct hlist_nulls_node *next, **pprev;
+};
+#define INIT_HLIST_NULLS_HEAD(ptr, nulls) \
+	((ptr)->first = (struct hlist_nulls_node *) (1UL | (((long)nulls) << 1)))
+
+#define hlist_nulls_entry(ptr, type, member) container_of(ptr,type,member)
+/**
+ * ptr_is_a_nulls - Test if a ptr is a nulls
+ * @ptr: ptr to be tested
+ *
+ */
+static inline int is_a_nulls(const struct hlist_nulls_node *ptr)
+{
+	return ((unsigned long)ptr & 1);
+}
+
+/**
+ * get_nulls_value - Get the 'nulls' value of the end of chain
+ * @ptr: end of chain
+ *
+ * Should be called only if is_a_nulls(ptr);
+ */
+static inline unsigned long get_nulls_value(const struct hlist_nulls_node *ptr)
+{
+	return ((unsigned long)ptr) >> 1;
+}
+
+static inline int hlist_nulls_unhashed(const struct hlist_nulls_node *h)
+{
+	return !h->pprev;
+}
+
+static inline int hlist_nulls_empty(const struct hlist_nulls_head *h)
+{
+	return is_a_nulls(h->first);
+}
+
+static inline void hlist_nulls_add_head(struct hlist_nulls_node *n,
+					struct hlist_nulls_head *h)
+{
+	struct hlist_nulls_node *first = h->first;
+
+	n->next = first;
+	n->pprev = &h->first;
+	h->first = n;
+	if (!is_a_nulls(first))
+		first->pprev = &n->next;
+}
+
+static inline void __hlist_nulls_del(struct hlist_nulls_node *n)
+{
+	struct hlist_nulls_node *next = n->next;
+	struct hlist_nulls_node **pprev = n->pprev;
+	*pprev = next;
+	if (!is_a_nulls(next))
+		next->pprev = pprev;
+}
+
+static inline void hlist_nulls_del(struct hlist_nulls_node *n)
+{
+	__hlist_nulls_del(n);
+	n->pprev = LIST_POISON2;
+}
+
+/**
+ * hlist_nulls_for_each_entry	- iterate over list of given type
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the hlist_node within the struct.
+ *
+ */
+#define hlist_nulls_for_each_entry(tpos, pos, head, member)		       \
+	for (pos = (head)->first;					       \
+	     (!is_a_nulls(pos)) &&					       \
+		({ tpos = hlist_nulls_entry(pos, typeof(*tpos), member); 1;}); \
+	     pos = pos->next)
+
+/**
+ * hlist_nulls_for_each_entry_from - iterate over a hlist continuing from current point
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
+ * @member:	the name of the hlist_node within the struct.
+ *
+ */
+#define hlist_nulls_for_each_entry_from(tpos, pos, member)	\
+	for (; (!is_a_nulls(pos)) && 				\
+		({ tpos = hlist_nulls_entry(pos, typeof(*tpos), member); 1;}); \
+	     pos = pos->next)
+
+#endif
diff --git a/include/linux/list_sort.h b/include/linux/list_sort.h
new file mode 100644
index 00000000..1a2df2ef
--- /dev/null
+++ b/include/linux/list_sort.h
@@ -0,0 +1,11 @@
+#ifndef _LINUX_LIST_SORT_H
+#define _LINUX_LIST_SORT_H
+
+#include <linux/types.h>
+
+struct list_head;
+
+void list_sort(void *priv, struct list_head *head,
+	       int (*cmp)(void *priv, struct list_head *a,
+			  struct list_head *b));
+#endif
diff --git a/include/linux/llc.h b/include/linux/llc.h
new file mode 100644
index 00000000..a2418ae1
--- /dev/null
+++ b/include/linux/llc.h
@@ -0,0 +1,91 @@
+#ifndef __LINUX_LLC_H
+#define __LINUX_LLC_H
+/*
+ * IEEE 802.2 User Interface SAPs for Linux, data structures and indicators.
+ *
+ * Copyright (c) 2001 by Jay Schulist <jschlst@samba.org>
+ *
+ * This program can be redistributed or modified under the terms of the
+ * GNU General Public License as published by the Free Software Foundation.
+ * This program is distributed without any warranty or implied warranty
+ * of merchantability or fitness for a particular purpose.
+ *
+ * See the GNU General Public License for more details.
+ */
+
+#include <linux/socket.h>
+
+#define __LLC_SOCK_SIZE__ 16	/* sizeof(sockaddr_llc), word align. */
+struct sockaddr_llc {
+	__kernel_sa_family_t sllc_family; /* AF_LLC */
+	__kernel_sa_family_t sllc_arphrd; /* ARPHRD_ETHER */
+	unsigned char   sllc_test;
+	unsigned char   sllc_xid;
+	unsigned char	sllc_ua;	/* UA data, only for SOCK_STREAM. */
+	unsigned char   sllc_sap;
+	unsigned char   sllc_mac[IFHWADDRLEN];
+	unsigned char   __pad[__LLC_SOCK_SIZE__ -
+			      sizeof(__kernel_sa_family_t) * 2 -
+			      sizeof(unsigned char) * 4 - IFHWADDRLEN];
+};
+
+/* sockopt definitions. */
+enum llc_sockopts {
+	LLC_OPT_UNKNOWN = 0,
+	LLC_OPT_RETRY,		/* max retrans attempts. */
+	LLC_OPT_SIZE,		/* max PDU size (octets). */
+	LLC_OPT_ACK_TMR_EXP,	/* ack expire time (secs). */
+	LLC_OPT_P_TMR_EXP,	/* pf cycle expire time (secs). */
+	LLC_OPT_REJ_TMR_EXP,	/* rej sent expire time (secs). */
+	LLC_OPT_BUSY_TMR_EXP,	/* busy state expire time (secs). */
+	LLC_OPT_TX_WIN,		/* tx window size. */
+	LLC_OPT_RX_WIN,		/* rx window size. */
+	LLC_OPT_PKTINFO,	/* ancillary packet information. */
+	LLC_OPT_MAX
+};
+
+#define LLC_OPT_MAX_RETRY	 100
+#define LLC_OPT_MAX_SIZE	4196
+#define LLC_OPT_MAX_WIN		 127
+#define LLC_OPT_MAX_ACK_TMR_EXP	  60
+#define LLC_OPT_MAX_P_TMR_EXP	  60
+#define LLC_OPT_MAX_REJ_TMR_EXP	  60
+#define LLC_OPT_MAX_BUSY_TMR_EXP  60
+
+/* LLC SAP types. */
+#define LLC_SAP_NULL	0x00		/* NULL SAP. 			*/
+#define LLC_SAP_LLC	0x02		/* LLC Sublayer Management. 	*/
+#define LLC_SAP_SNA	0x04		/* SNA Path Control. 		*/
+#define LLC_SAP_PNM	0x0E		/* Proway Network Management.	*/	
+#define LLC_SAP_IP	0x06		/* TCP/IP. 			*/
+#define LLC_SAP_BSPAN	0x42		/* Bridge Spanning Tree Proto	*/
+#define LLC_SAP_MMS	0x4E		/* Manufacturing Message Srv.	*/
+#define LLC_SAP_8208	0x7E		/* ISO 8208			*/
+#define LLC_SAP_3COM	0x80		/* 3COM. 			*/
+#define LLC_SAP_PRO	0x8E		/* Proway Active Station List	*/
+#define LLC_SAP_SNAP	0xAA		/* SNAP. 			*/
+#define LLC_SAP_BANYAN	0xBC		/* Banyan. 			*/
+#define LLC_SAP_IPX	0xE0		/* IPX/SPX. 			*/
+#define LLC_SAP_NETBEUI	0xF0		/* NetBEUI. 			*/
+#define LLC_SAP_LANMGR	0xF4		/* LanManager. 			*/
+#define LLC_SAP_IMPL	0xF8		/* IMPL				*/
+#define LLC_SAP_DISC	0xFC		/* Discovery			*/
+#define LLC_SAP_OSI	0xFE		/* OSI Network Layers. 		*/
+#define LLC_SAP_LAR	0xDC		/* LAN Address Resolution 	*/
+#define LLC_SAP_RM	0xD4		/* Resource Management 		*/
+#define LLC_SAP_GLOBAL	0xFF		/* Global SAP. 			*/
+
+struct llc_pktinfo {
+	int lpi_ifindex;
+	unsigned char lpi_sap;
+	unsigned char lpi_mac[IFHWADDRLEN];
+};
+
+#ifdef __KERNEL__
+#define LLC_SAP_DYN_START	0xC0
+#define LLC_SAP_DYN_STOP	0xDE
+#define LLC_SAP_DYN_TRIES	4
+
+#define llc_ui_skb_cb(__skb) ((struct sockaddr_llc *)&((__skb)->cb[0]))
+#endif /* __KERNEL__ */
+#endif /* __LINUX_LLC_H */
diff --git a/include/linux/llist.h b/include/linux/llist.h
new file mode 100644
index 00000000..a5199f6d
--- /dev/null
+++ b/include/linux/llist.h
@@ -0,0 +1,186 @@
+#ifndef LLIST_H
+#define LLIST_H
+/*
+ * Lock-less NULL terminated single linked list
+ *
+ * If there are multiple producers and multiple consumers, llist_add
+ * can be used in producers and llist_del_all can be used in
+ * consumers.  They can work simultaneously without lock.  But
+ * llist_del_first can not be used here.  Because llist_del_first
+ * depends on list->first->next does not changed if list->first is not
+ * changed during its operation, but llist_del_first, llist_add,
+ * llist_add (or llist_del_all, llist_add, llist_add) sequence in
+ * another consumer may violate that.
+ *
+ * If there are multiple producers and one consumer, llist_add can be
+ * used in producers and llist_del_all or llist_del_first can be used
+ * in the consumer.
+ *
+ * This can be summarized as follow:
+ *
+ *           |   add    | del_first |  del_all
+ * add       |    -     |     -     |     -
+ * del_first |          |     L     |     L
+ * del_all   |          |           |     -
+ *
+ * Where "-" stands for no lock is needed, while "L" stands for lock
+ * is needed.
+ *
+ * The list entries deleted via llist_del_all can be traversed with
+ * traversing function such as llist_for_each etc.  But the list
+ * entries can not be traversed safely before deleted from the list.
+ * The order of deleted entries is from the newest to the oldest added
+ * one.  If you want to traverse from the oldest to the newest, you
+ * must reverse the order by yourself before traversing.
+ *
+ * The basic atomic operation of this list is cmpxchg on long.  On
+ * architectures that don't have NMI-safe cmpxchg implementation, the
+ * list can NOT be used in NMI handlers.  So code that uses the list in
+ * an NMI handler should depend on CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG.
+ *
+ * Copyright 2010,2011 Intel Corp.
+ *   Author: Huang Ying <ying.huang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation;
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <asm/cmpxchg.h>
+
+struct llist_head {
+	struct llist_node *first;
+};
+
+struct llist_node {
+	struct llist_node *next;
+};
+
+#define LLIST_HEAD_INIT(name)	{ NULL }
+#define LLIST_HEAD(name)	struct llist_head name = LLIST_HEAD_INIT(name)
+
+/**
+ * init_llist_head - initialize lock-less list head
+ * @head:	the head for your lock-less list
+ */
+static inline void init_llist_head(struct llist_head *list)
+{
+	list->first = NULL;
+}
+
+/**
+ * llist_entry - get the struct of this entry
+ * @ptr:	the &struct llist_node pointer.
+ * @type:	the type of the struct this is embedded in.
+ * @member:	the name of the llist_node within the struct.
+ */
+#define llist_entry(ptr, type, member)		\
+	container_of(ptr, type, member)
+
+/**
+ * llist_for_each - iterate over some deleted entries of a lock-less list
+ * @pos:	the &struct llist_node to use as a loop cursor
+ * @node:	the first entry of deleted list entries
+ *
+ * In general, some entries of the lock-less list can be traversed
+ * safely only after being deleted from list, so start with an entry
+ * instead of list head.
+ *
+ * If being used on entries deleted from lock-less list directly, the
+ * traverse order is from the newest to the oldest added entry.  If
+ * you want to traverse from the oldest to the newest, you must
+ * reverse the order by yourself before traversing.
+ */
+#define llist_for_each(pos, node)			\
+	for ((pos) = (node); pos; (pos) = (pos)->next)
+
+/**
+ * llist_for_each_entry - iterate over some deleted entries of lock-less list of given type
+ * @pos:	the type * to use as a loop cursor.
+ * @node:	the fist entry of deleted list entries.
+ * @member:	the name of the llist_node with the struct.
+ *
+ * In general, some entries of the lock-less list can be traversed
+ * safely only after being removed from list, so start with an entry
+ * instead of list head.
+ *
+ * If being used on entries deleted from lock-less list directly, the
+ * traverse order is from the newest to the oldest added entry.  If
+ * you want to traverse from the oldest to the newest, you must
+ * reverse the order by yourself before traversing.
+ */
+#define llist_for_each_entry(pos, node, member)				\
+	for ((pos) = llist_entry((node), typeof(*(pos)), member);	\
+	     &(pos)->member != NULL;					\
+	     (pos) = llist_entry((pos)->member.next, typeof(*(pos)), member))
+
+/**
+ * llist_empty - tests whether a lock-less list is empty
+ * @head:	the list to test
+ *
+ * Not guaranteed to be accurate or up to date.  Just a quick way to
+ * test whether the list is empty without deleting something from the
+ * list.
+ */
+static inline bool llist_empty(const struct llist_head *head)
+{
+	return ACCESS_ONCE(head->first) == NULL;
+}
+
+static inline struct llist_node *llist_next(struct llist_node *node)
+{
+	return node->next;
+}
+
+/**
+ * llist_add - add a new entry
+ * @new:	new entry to be added
+ * @head:	the head for your lock-less list
+ *
+ * Returns true if the list was empty prior to adding this entry.
+ */
+static inline bool llist_add(struct llist_node *new, struct llist_head *head)
+{
+	struct llist_node *entry, *old_entry;
+
+	entry = head->first;
+	for (;;) {
+		old_entry = entry;
+		new->next = entry;
+		entry = cmpxchg(&head->first, old_entry, new);
+		if (entry == old_entry)
+			break;
+	}
+
+	return old_entry == NULL;
+}
+
+/**
+ * llist_del_all - delete all entries from lock-less list
+ * @head:	the head of lock-less list to delete all entries
+ *
+ * If list is empty, return NULL, otherwise, delete all entries and
+ * return the pointer to the first entry.  The order of entries
+ * deleted is from the newest to the oldest added one.
+ */
+static inline struct llist_node *llist_del_all(struct llist_head *head)
+{
+	return xchg(&head->first, NULL);
+}
+
+extern bool llist_add_batch(struct llist_node *new_first,
+			    struct llist_node *new_last,
+			    struct llist_head *head);
+extern struct llist_node *llist_del_first(struct llist_head *head);
+
+#endif /* LLIST_H */
diff --git a/include/linux/lockd/bind.h b/include/linux/lockd/bind.h
new file mode 100644
index 00000000..4d24d645
--- /dev/null
+++ b/include/linux/lockd/bind.h
@@ -0,0 +1,60 @@
+/*
+ * linux/include/linux/lockd/bind.h
+ *
+ * This is the part of lockd visible to nfsd and the nfs client.
+ *
+ * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef LINUX_LOCKD_BIND_H
+#define LINUX_LOCKD_BIND_H
+
+#include <linux/lockd/nlm.h>
+/* need xdr-encoded error codes too, so... */
+#include <linux/lockd/xdr.h>
+#ifdef CONFIG_LOCKD_V4
+#include <linux/lockd/xdr4.h>
+#endif
+
+/* Dummy declarations */
+struct svc_rqst;
+
+/*
+ * This is the set of functions for lockd->nfsd communication
+ */
+struct nlmsvc_binding {
+	__be32			(*fopen)(struct svc_rqst *,
+						struct nfs_fh *,
+						struct file **);
+	void			(*fclose)(struct file *);
+};
+
+extern struct nlmsvc_binding *	nlmsvc_ops;
+
+/*
+ * Similar to nfs_client_initdata, but without the NFS-specific
+ * rpc_ops field.
+ */
+struct nlmclnt_initdata {
+	const char		*hostname;
+	const struct sockaddr	*address;
+	size_t			addrlen;
+	unsigned short		protocol;
+	u32			nfs_version;
+	int			noresvport;
+	struct net		*net;
+};
+
+/*
+ * Functions exported by the lockd module
+ */
+
+extern struct nlm_host *nlmclnt_init(const struct nlmclnt_initdata *nlm_init);
+extern void	nlmclnt_done(struct nlm_host *host);
+
+extern int	nlmclnt_proc(struct nlm_host *host, int cmd,
+					struct file_lock *fl);
+extern int	lockd_up(struct net *net);
+extern void	lockd_down(struct net *net);
+
+#endif /* LINUX_LOCKD_BIND_H */
diff --git a/include/linux/lockd/debug.h b/include/linux/lockd/debug.h
new file mode 100644
index 00000000..257d3779
--- /dev/null
+++ b/include/linux/lockd/debug.h
@@ -0,0 +1,47 @@
+/*
+ * linux/include/linux/lockd/debug.h
+ *
+ * Debugging stuff.
+ *
+ * Copyright (C) 1996 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef LINUX_LOCKD_DEBUG_H
+#define LINUX_LOCKD_DEBUG_H
+
+#ifdef __KERNEL__
+
+#include <linux/sunrpc/debug.h>
+
+/*
+ * Enable lockd debugging.
+ * Requires RPC_DEBUG.
+ */
+#ifdef RPC_DEBUG
+# define LOCKD_DEBUG		1
+#endif
+
+#undef ifdebug
+#if defined(RPC_DEBUG) && defined(LOCKD_DEBUG)
+# define ifdebug(flag)		if (unlikely(nlm_debug & NLMDBG_##flag))
+#else
+# define ifdebug(flag)		if (0)
+#endif
+
+#endif /* __KERNEL__ */
+
+/*
+ * Debug flags
+ */
+#define NLMDBG_SVC		0x0001
+#define NLMDBG_CLIENT		0x0002
+#define NLMDBG_CLNTLOCK		0x0004
+#define NLMDBG_SVCLOCK		0x0008
+#define NLMDBG_MONITOR		0x0010
+#define NLMDBG_CLNTSUBS		0x0020
+#define NLMDBG_SVCSUBS		0x0040
+#define NLMDBG_HOSTCACHE	0x0080
+#define NLMDBG_XDR		0x0100
+#define NLMDBG_ALL		0x7fff
+
+#endif /* LINUX_LOCKD_DEBUG_H */
diff --git a/include/linux/lockd/lockd.h b/include/linux/lockd/lockd.h
new file mode 100644
index 00000000..f04ce6ac
--- /dev/null
+++ b/include/linux/lockd/lockd.h
@@ -0,0 +1,365 @@
+/*
+ * linux/include/linux/lockd/lockd.h
+ *
+ * General-purpose lockd include file.
+ *
+ * Copyright (C) 1996 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef LINUX_LOCKD_LOCKD_H
+#define LINUX_LOCKD_LOCKD_H
+
+#ifdef __KERNEL__
+
+#include <linux/in.h>
+#include <linux/in6.h>
+#include <net/ipv6.h>
+#include <linux/fs.h>
+#include <linux/kref.h>
+#include <linux/utsname.h>
+#include <linux/nfsd/nfsfh.h>
+#include <linux/lockd/bind.h>
+#include <linux/lockd/xdr.h>
+#ifdef CONFIG_LOCKD_V4
+#include <linux/lockd/xdr4.h>
+#endif
+#include <linux/lockd/debug.h>
+
+/*
+ * Version string
+ */
+#define LOCKD_VERSION		"0.5"
+
+/*
+ * Default timeout for RPC calls (seconds)
+ */
+#define LOCKD_DFLT_TIMEO	10
+
+/*
+ * Lockd host handle (used both by the client and server personality).
+ */
+struct nlm_host {
+	struct hlist_node	h_hash;		/* doubly linked list */
+	struct sockaddr_storage	h_addr;		/* peer address */
+	size_t			h_addrlen;
+	struct sockaddr_storage	h_srcaddr;	/* our address (optional) */
+	size_t			h_srcaddrlen;
+	struct rpc_clnt		*h_rpcclnt;	/* RPC client to talk to peer */
+	char			*h_name;		/* remote hostname */
+	u32			h_version;	/* interface version */
+	unsigned short		h_proto;	/* transport proto */
+	unsigned short		h_reclaiming : 1,
+				h_server     : 1, /* server side, not client side */
+				h_noresvport : 1,
+				h_inuse      : 1;
+	wait_queue_head_t	h_gracewait;	/* wait while reclaiming */
+	struct rw_semaphore	h_rwsem;	/* Reboot recovery lock */
+	u32			h_state;	/* pseudo-state counter */
+	u32			h_nsmstate;	/* true remote NSM state */
+	u32			h_pidcount;	/* Pseudopids */
+	atomic_t		h_count;	/* reference count */
+	struct mutex		h_mutex;	/* mutex for pmap binding */
+	unsigned long		h_nextrebind;	/* next portmap call */
+	unsigned long		h_expires;	/* eligible for GC */
+	struct list_head	h_lockowners;	/* Lockowners for the client */
+	spinlock_t		h_lock;
+	struct list_head	h_granted;	/* Locks in GRANTED state */
+	struct list_head	h_reclaim;	/* Locks in RECLAIM state */
+	struct nsm_handle	*h_nsmhandle;	/* NSM status handle */
+	char			*h_addrbuf;	/* address eyecatcher */
+	struct net		*net;		/* host net */
+};
+
+/*
+ * The largest string sm_addrbuf should hold is a full-size IPv6 address
+ * (no "::" anywhere) with a scope ID.  The buffer size is computed to
+ * hold eight groups of colon-separated four-hex-digit numbers, a
+ * percent sign, a scope id (at most 32 bits, in decimal), and NUL.
+ */
+#define NSM_ADDRBUF		((8 * 4 + 7) + (1 + 10) + 1)
+
+struct nsm_handle {
+	struct list_head	sm_link;
+	atomic_t		sm_count;
+	char			*sm_mon_name;
+	char			*sm_name;
+	struct sockaddr_storage	sm_addr;
+	size_t			sm_addrlen;
+	unsigned int		sm_monitored : 1,
+				sm_sticky : 1;	/* don't unmonitor */
+	struct nsm_private	sm_priv;
+	char			sm_addrbuf[NSM_ADDRBUF];
+};
+
+/*
+ * Rigorous type checking on sockaddr type conversions
+ */
+static inline struct sockaddr_in *nlm_addr_in(const struct nlm_host *host)
+{
+	return (struct sockaddr_in *)&host->h_addr;
+}
+
+static inline struct sockaddr *nlm_addr(const struct nlm_host *host)
+{
+	return (struct sockaddr *)&host->h_addr;
+}
+
+static inline struct sockaddr_in *nlm_srcaddr_in(const struct nlm_host *host)
+{
+	return (struct sockaddr_in *)&host->h_srcaddr;
+}
+
+static inline struct sockaddr *nlm_srcaddr(const struct nlm_host *host)
+{
+	return (struct sockaddr *)&host->h_srcaddr;
+}
+
+/*
+ * Map an fl_owner_t into a unique 32-bit "pid"
+ */
+struct nlm_lockowner {
+	struct list_head list;
+	atomic_t count;
+
+	struct nlm_host *host;
+	fl_owner_t owner;
+	uint32_t pid;
+};
+
+struct nlm_wait;
+
+/*
+ * Memory chunk for NLM client RPC request.
+ */
+#define NLMCLNT_OHSIZE		((__NEW_UTS_LEN) + 10u)
+struct nlm_rqst {
+	atomic_t		a_count;
+	unsigned int		a_flags;	/* initial RPC task flags */
+	struct nlm_host *	a_host;		/* host handle */
+	struct nlm_args		a_args;		/* arguments */
+	struct nlm_res		a_res;		/* result */
+	struct nlm_block *	a_block;
+	unsigned int		a_retries;	/* Retry count */
+	u8			a_owner[NLMCLNT_OHSIZE];
+};
+
+/*
+ * This struct describes a file held open by lockd on behalf of
+ * an NFS client.
+ */
+struct nlm_file {
+	struct hlist_node	f_list;		/* linked list */
+	struct nfs_fh		f_handle;	/* NFS file handle */
+	struct file *		f_file;		/* VFS file pointer */
+	struct nlm_share *	f_shares;	/* DOS shares */
+	struct list_head	f_blocks;	/* blocked locks */
+	unsigned int		f_locks;	/* guesstimate # of locks */
+	unsigned int		f_count;	/* reference count */
+	struct mutex		f_mutex;	/* avoid concurrent access */
+};
+
+/*
+ * This is a server block (i.e. a lock requested by some client which
+ * couldn't be granted because of a conflicting lock).
+ */
+#define NLM_NEVER		(~(unsigned long) 0)
+/* timeout on non-blocking call: */
+#define NLM_TIMEOUT		(7 * HZ)
+
+struct nlm_block {
+	struct kref		b_count;	/* Reference count */
+	struct list_head	b_list;		/* linked list of all blocks */
+	struct list_head	b_flist;	/* linked list (per file) */
+	struct nlm_rqst	*	b_call;		/* RPC args & callback info */
+	struct svc_serv *	b_daemon;	/* NLM service */
+	struct nlm_host *	b_host;		/* host handle for RPC clnt */
+	unsigned long		b_when;		/* next re-xmit */
+	unsigned int		b_id;		/* block id */
+	unsigned char		b_granted;	/* VFS granted lock */
+	struct nlm_file *	b_file;		/* file in question */
+	struct cache_req *	b_cache_req;	/* deferred request handling */
+	struct file_lock *	b_fl;		/* set for GETLK */
+	struct cache_deferred_req * b_deferred_req;
+	unsigned int		b_flags;	/* block flags */
+#define B_QUEUED		1	/* lock queued */
+#define B_GOT_CALLBACK		2	/* got lock or conflicting lock */
+#define B_TIMED_OUT		4	/* filesystem too slow to respond */
+};
+
+/*
+ * Global variables
+ */
+extern const struct rpc_program	nlm_program;
+extern struct svc_procedure	nlmsvc_procedures[];
+#ifdef CONFIG_LOCKD_V4
+extern struct svc_procedure	nlmsvc_procedures4[];
+#endif
+extern int			nlmsvc_grace_period;
+extern unsigned long		nlmsvc_timeout;
+extern bool			nsm_use_hostnames;
+extern u32			nsm_local_state;
+
+/*
+ * Lockd client functions
+ */
+struct nlm_rqst * nlm_alloc_call(struct nlm_host *host);
+int		  nlm_async_call(struct nlm_rqst *, u32, const struct rpc_call_ops *);
+int		  nlm_async_reply(struct nlm_rqst *, u32, const struct rpc_call_ops *);
+void		  nlmclnt_release_call(struct nlm_rqst *);
+struct nlm_wait * nlmclnt_prepare_block(struct nlm_host *host, struct file_lock *fl);
+void		  nlmclnt_finish_block(struct nlm_wait *block);
+int		  nlmclnt_block(struct nlm_wait *block, struct nlm_rqst *req, long timeout);
+__be32		  nlmclnt_grant(const struct sockaddr *addr,
+				const struct nlm_lock *lock);
+void		  nlmclnt_recovery(struct nlm_host *);
+int		  nlmclnt_reclaim(struct nlm_host *, struct file_lock *);
+void		  nlmclnt_next_cookie(struct nlm_cookie *);
+
+/*
+ * Host cache
+ */
+struct nlm_host  *nlmclnt_lookup_host(const struct sockaddr *sap,
+					const size_t salen,
+					const unsigned short protocol,
+					const u32 version,
+					const char *hostname,
+					int noresvport,
+					struct net *net);
+void		  nlmclnt_release_host(struct nlm_host *);
+struct nlm_host  *nlmsvc_lookup_host(const struct svc_rqst *rqstp,
+					const char *hostname,
+					const size_t hostname_len);
+void		  nlmsvc_release_host(struct nlm_host *);
+struct rpc_clnt * nlm_bind_host(struct nlm_host *);
+void		  nlm_rebind_host(struct nlm_host *);
+struct nlm_host * nlm_get_host(struct nlm_host *);
+void		  nlm_shutdown_hosts(void);
+void		  nlm_shutdown_hosts_net(struct net *net);
+void		  nlm_host_rebooted(const struct nlm_reboot *);
+
+/*
+ * Host monitoring
+ */
+int		  nsm_monitor(const struct nlm_host *host);
+void		  nsm_unmonitor(const struct nlm_host *host);
+
+struct nsm_handle *nsm_get_handle(const struct sockaddr *sap,
+					const size_t salen,
+					const char *hostname,
+					const size_t hostname_len);
+struct nsm_handle *nsm_reboot_lookup(const struct nlm_reboot *info);
+void		  nsm_release(struct nsm_handle *nsm);
+
+/*
+ * This is used in garbage collection and resource reclaim
+ * A return value != 0 means destroy the lock/block/share
+ */
+typedef int	  (*nlm_host_match_fn_t)(void *cur, struct nlm_host *ref);
+
+/*
+ * Server-side lock handling
+ */
+__be32		  nlmsvc_lock(struct svc_rqst *, struct nlm_file *,
+			      struct nlm_host *, struct nlm_lock *, int,
+			      struct nlm_cookie *, int);
+__be32		  nlmsvc_unlock(struct nlm_file *, struct nlm_lock *);
+__be32		  nlmsvc_testlock(struct svc_rqst *, struct nlm_file *,
+			struct nlm_host *, struct nlm_lock *,
+			struct nlm_lock *, struct nlm_cookie *);
+__be32		  nlmsvc_cancel_blocked(struct nlm_file *, struct nlm_lock *);
+unsigned long	  nlmsvc_retry_blocked(void);
+void		  nlmsvc_traverse_blocks(struct nlm_host *, struct nlm_file *,
+					nlm_host_match_fn_t match);
+void		  nlmsvc_grant_reply(struct nlm_cookie *, __be32);
+void		  nlmsvc_release_call(struct nlm_rqst *);
+
+/*
+ * File handling for the server personality
+ */
+__be32		  nlm_lookup_file(struct svc_rqst *, struct nlm_file **,
+					struct nfs_fh *);
+void		  nlm_release_file(struct nlm_file *);
+void		  nlmsvc_mark_resources(void);
+void		  nlmsvc_free_host_resources(struct nlm_host *);
+void		  nlmsvc_invalidate_all(void);
+
+/*
+ * Cluster failover support
+ */
+int           nlmsvc_unlock_all_by_sb(struct super_block *sb);
+int           nlmsvc_unlock_all_by_ip(struct sockaddr *server_addr);
+
+static inline struct inode *nlmsvc_file_inode(struct nlm_file *file)
+{
+	return file->f_file->f_path.dentry->d_inode;
+}
+
+static inline int __nlm_privileged_request4(const struct sockaddr *sap)
+{
+	const struct sockaddr_in *sin = (struct sockaddr_in *)sap;
+
+	if (ntohs(sin->sin_port) > 1023)
+		return 0;
+
+	return ipv4_is_loopback(sin->sin_addr.s_addr);
+}
+
+#if IS_ENABLED(CONFIG_IPV6)
+static inline int __nlm_privileged_request6(const struct sockaddr *sap)
+{
+	const struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)sap;
+
+	if (ntohs(sin6->sin6_port) > 1023)
+		return 0;
+
+	if (ipv6_addr_type(&sin6->sin6_addr) & IPV6_ADDR_MAPPED)
+		return ipv4_is_loopback(sin6->sin6_addr.s6_addr32[3]);
+
+	return ipv6_addr_type(&sin6->sin6_addr) & IPV6_ADDR_LOOPBACK;
+}
+#else	/* IS_ENABLED(CONFIG_IPV6) */
+static inline int __nlm_privileged_request6(const struct sockaddr *sap)
+{
+	return 0;
+}
+#endif	/* IS_ENABLED(CONFIG_IPV6) */
+
+/*
+ * Ensure incoming requests are from local privileged callers.
+ *
+ * Return TRUE if sender is local and is connecting via a privileged port;
+ * otherwise return FALSE.
+ */
+static inline int nlm_privileged_requester(const struct svc_rqst *rqstp)
+{
+	const struct sockaddr *sap = svc_addr(rqstp);
+
+	switch (sap->sa_family) {
+	case AF_INET:
+		return __nlm_privileged_request4(sap);
+	case AF_INET6:
+		return __nlm_privileged_request6(sap);
+	default:
+		return 0;
+	}
+}
+
+/*
+ * Compare two NLM locks.
+ * When the second lock is of type F_UNLCK, this acts like a wildcard.
+ */
+static inline int nlm_compare_locks(const struct file_lock *fl1,
+				    const struct file_lock *fl2)
+{
+	return	fl1->fl_pid   == fl2->fl_pid
+	     && fl1->fl_owner == fl2->fl_owner
+	     && fl1->fl_start == fl2->fl_start
+	     && fl1->fl_end   == fl2->fl_end
+	     &&(fl1->fl_type  == fl2->fl_type || fl2->fl_type == F_UNLCK);
+}
+
+extern const struct lock_manager_operations nlmsvc_lock_operations;
+
+#endif /* __KERNEL__ */
+
+#endif /* LINUX_LOCKD_LOCKD_H */
diff --git a/include/linux/lockd/nlm.h b/include/linux/lockd/nlm.h
new file mode 100644
index 00000000..d9d46e44
--- /dev/null
+++ b/include/linux/lockd/nlm.h
@@ -0,0 +1,57 @@
+/*
+ * linux/include/linux/lockd/nlm.h
+ *
+ * Declarations for the Network Lock Manager protocol.
+ *
+ * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef LINUX_LOCKD_NLM_H
+#define LINUX_LOCKD_NLM_H
+
+
+/* Maximum file offset in file_lock.fl_end */
+# define NLM_OFFSET_MAX		((s32) 0x7fffffff)
+# define NLM4_OFFSET_MAX	((s64) ((~(u64)0) >> 1))
+
+/* Return states for NLM */
+enum {
+	NLM_LCK_GRANTED			= 0,
+	NLM_LCK_DENIED			= 1,
+	NLM_LCK_DENIED_NOLOCKS		= 2,
+	NLM_LCK_BLOCKED			= 3,
+	NLM_LCK_DENIED_GRACE_PERIOD	= 4,
+#ifdef CONFIG_LOCKD_V4
+	NLM_DEADLCK			= 5,
+	NLM_ROFS			= 6,
+	NLM_STALE_FH			= 7,
+	NLM_FBIG			= 8,
+	NLM_FAILED			= 9,
+#endif
+};
+
+#define NLM_PROGRAM		100021
+
+#define NLMPROC_NULL		0
+#define NLMPROC_TEST		1
+#define NLMPROC_LOCK		2
+#define NLMPROC_CANCEL		3
+#define NLMPROC_UNLOCK		4
+#define NLMPROC_GRANTED		5
+#define NLMPROC_TEST_MSG	6
+#define NLMPROC_LOCK_MSG	7
+#define NLMPROC_CANCEL_MSG	8
+#define NLMPROC_UNLOCK_MSG	9
+#define NLMPROC_GRANTED_MSG	10
+#define NLMPROC_TEST_RES	11
+#define NLMPROC_LOCK_RES	12
+#define NLMPROC_CANCEL_RES	13
+#define NLMPROC_UNLOCK_RES	14
+#define NLMPROC_GRANTED_RES	15
+#define NLMPROC_NSM_NOTIFY	16		/* statd callback */
+#define NLMPROC_SHARE		20
+#define NLMPROC_UNSHARE		21
+#define NLMPROC_NM_LOCK		22
+#define NLMPROC_FREE_ALL	23
+
+#endif /* LINUX_LOCKD_NLM_H */
diff --git a/include/linux/lockd/share.h b/include/linux/lockd/share.h
new file mode 100644
index 00000000..630c5bf6
--- /dev/null
+++ b/include/linux/lockd/share.h
@@ -0,0 +1,31 @@
+/*
+ * linux/include/linux/lockd/share.h
+ *
+ * DOS share management for lockd.
+ *
+ * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef LINUX_LOCKD_SHARE_H
+#define LINUX_LOCKD_SHARE_H
+
+/*
+ * DOS share for a specific file
+ */
+struct nlm_share {
+	struct nlm_share *	s_next;		/* linked list */
+	struct nlm_host *	s_host;		/* client host */
+	struct nlm_file *	s_file;		/* shared file */
+	struct xdr_netobj	s_owner;	/* owner handle */
+	u32			s_access;	/* access mode */
+	u32			s_mode;		/* deny mode */
+};
+
+__be32	nlmsvc_share_file(struct nlm_host *, struct nlm_file *,
+					       struct nlm_args *);
+__be32	nlmsvc_unshare_file(struct nlm_host *, struct nlm_file *,
+					       struct nlm_args *);
+void	nlmsvc_traverse_shares(struct nlm_host *, struct nlm_file *,
+					       nlm_host_match_fn_t);
+
+#endif /* LINUX_LOCKD_SHARE_H */
diff --git a/include/linux/lockd/xdr.h b/include/linux/lockd/xdr.h
new file mode 100644
index 00000000..d39ed1cc
--- /dev/null
+++ b/include/linux/lockd/xdr.h
@@ -0,0 +1,118 @@
+/*
+ * linux/include/linux/lockd/xdr.h
+ *
+ * XDR types for the NLM protocol
+ *
+ * Copyright (C) 1996 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef LOCKD_XDR_H
+#define LOCKD_XDR_H
+
+#include <linux/fs.h>
+#include <linux/nfs.h>
+#include <linux/sunrpc/xdr.h>
+
+#define SM_MAXSTRLEN		1024
+#define SM_PRIV_SIZE		16
+
+struct nsm_private {
+	unsigned char		data[SM_PRIV_SIZE];
+};
+
+struct svc_rqst;
+
+#define NLM_MAXCOOKIELEN    	32
+#define NLM_MAXSTRLEN		1024
+
+#define	nlm_granted		cpu_to_be32(NLM_LCK_GRANTED)
+#define	nlm_lck_denied		cpu_to_be32(NLM_LCK_DENIED)
+#define	nlm_lck_denied_nolocks	cpu_to_be32(NLM_LCK_DENIED_NOLOCKS)
+#define	nlm_lck_blocked		cpu_to_be32(NLM_LCK_BLOCKED)
+#define	nlm_lck_denied_grace_period	cpu_to_be32(NLM_LCK_DENIED_GRACE_PERIOD)
+
+#define nlm_drop_reply		cpu_to_be32(30000)
+
+/* Lock info passed via NLM */
+struct nlm_lock {
+	char *			caller;
+	unsigned int		len; 	/* length of "caller" */
+	struct nfs_fh		fh;
+	struct xdr_netobj	oh;
+	u32			svid;
+	struct file_lock	fl;
+};
+
+/*
+ *	NLM cookies. Technically they can be 1K, but Linux only uses 8 bytes.
+ *	FreeBSD uses 16, Apple Mac OS X 10.3 uses 20. Therefore we set it to
+ *	32 bytes.
+ */
+ 
+struct nlm_cookie
+{
+	unsigned char data[NLM_MAXCOOKIELEN];
+	unsigned int len;
+};
+
+/*
+ * Generic lockd arguments for all but sm_notify
+ */
+struct nlm_args {
+	struct nlm_cookie	cookie;
+	struct nlm_lock		lock;
+	u32			block;
+	u32			reclaim;
+	u32			state;
+	u32			monitor;
+	u32			fsm_access;
+	u32			fsm_mode;
+};
+
+typedef struct nlm_args nlm_args;
+
+/*
+ * Generic lockd result
+ */
+struct nlm_res {
+	struct nlm_cookie	cookie;
+	__be32			status;
+	struct nlm_lock		lock;
+};
+
+/*
+ * statd callback when client has rebooted
+ */
+struct nlm_reboot {
+	char			*mon;
+	unsigned int		len;
+	u32			state;
+	struct nsm_private	priv;
+};
+
+/*
+ * Contents of statd callback when monitored host rebooted
+ */
+#define NLMSVC_XDRSIZE		sizeof(struct nlm_args)
+
+int	nlmsvc_decode_testargs(struct svc_rqst *, __be32 *, struct nlm_args *);
+int	nlmsvc_encode_testres(struct svc_rqst *, __be32 *, struct nlm_res *);
+int	nlmsvc_decode_lockargs(struct svc_rqst *, __be32 *, struct nlm_args *);
+int	nlmsvc_decode_cancargs(struct svc_rqst *, __be32 *, struct nlm_args *);
+int	nlmsvc_decode_unlockargs(struct svc_rqst *, __be32 *, struct nlm_args *);
+int	nlmsvc_encode_res(struct svc_rqst *, __be32 *, struct nlm_res *);
+int	nlmsvc_decode_res(struct svc_rqst *, __be32 *, struct nlm_res *);
+int	nlmsvc_encode_void(struct svc_rqst *, __be32 *, void *);
+int	nlmsvc_decode_void(struct svc_rqst *, __be32 *, void *);
+int	nlmsvc_decode_shareargs(struct svc_rqst *, __be32 *, struct nlm_args *);
+int	nlmsvc_encode_shareres(struct svc_rqst *, __be32 *, struct nlm_res *);
+int	nlmsvc_decode_notify(struct svc_rqst *, __be32 *, struct nlm_args *);
+int	nlmsvc_decode_reboot(struct svc_rqst *, __be32 *, struct nlm_reboot *);
+/*
+int	nlmclt_encode_testargs(struct rpc_rqst *, u32 *, struct nlm_args *);
+int	nlmclt_encode_lockargs(struct rpc_rqst *, u32 *, struct nlm_args *);
+int	nlmclt_encode_cancargs(struct rpc_rqst *, u32 *, struct nlm_args *);
+int	nlmclt_encode_unlockargs(struct rpc_rqst *, u32 *, struct nlm_args *);
+ */
+
+#endif /* LOCKD_XDR_H */
diff --git a/include/linux/lockd/xdr4.h b/include/linux/lockd/xdr4.h
new file mode 100644
index 00000000..e58c88b5
--- /dev/null
+++ b/include/linux/lockd/xdr4.h
@@ -0,0 +1,47 @@
+/*
+ * linux/include/linux/lockd/xdr4.h
+ *
+ * XDR types for the NLM protocol
+ *
+ * Copyright (C) 1996 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef LOCKD_XDR4_H
+#define LOCKD_XDR4_H
+
+#include <linux/fs.h>
+#include <linux/nfs.h>
+#include <linux/sunrpc/xdr.h>
+#include <linux/lockd/xdr.h>
+
+/* error codes new to NLMv4 */
+#define	nlm4_deadlock		cpu_to_be32(NLM_DEADLCK)
+#define	nlm4_rofs		cpu_to_be32(NLM_ROFS)
+#define	nlm4_stale_fh		cpu_to_be32(NLM_STALE_FH)
+#define	nlm4_fbig		cpu_to_be32(NLM_FBIG)
+#define	nlm4_failed		cpu_to_be32(NLM_FAILED)
+
+
+
+int	nlm4svc_decode_testargs(struct svc_rqst *, __be32 *, struct nlm_args *);
+int	nlm4svc_encode_testres(struct svc_rqst *, __be32 *, struct nlm_res *);
+int	nlm4svc_decode_lockargs(struct svc_rqst *, __be32 *, struct nlm_args *);
+int	nlm4svc_decode_cancargs(struct svc_rqst *, __be32 *, struct nlm_args *);
+int	nlm4svc_decode_unlockargs(struct svc_rqst *, __be32 *, struct nlm_args *);
+int	nlm4svc_encode_res(struct svc_rqst *, __be32 *, struct nlm_res *);
+int	nlm4svc_decode_res(struct svc_rqst *, __be32 *, struct nlm_res *);
+int	nlm4svc_encode_void(struct svc_rqst *, __be32 *, void *);
+int	nlm4svc_decode_void(struct svc_rqst *, __be32 *, void *);
+int	nlm4svc_decode_shareargs(struct svc_rqst *, __be32 *, struct nlm_args *);
+int	nlm4svc_encode_shareres(struct svc_rqst *, __be32 *, struct nlm_res *);
+int	nlm4svc_decode_notify(struct svc_rqst *, __be32 *, struct nlm_args *);
+int	nlm4svc_decode_reboot(struct svc_rqst *, __be32 *, struct nlm_reboot *);
+/*
+int	nlmclt_encode_testargs(struct rpc_rqst *, u32 *, struct nlm_args *);
+int	nlmclt_encode_lockargs(struct rpc_rqst *, u32 *, struct nlm_args *);
+int	nlmclt_encode_cancargs(struct rpc_rqst *, u32 *, struct nlm_args *);
+int	nlmclt_encode_unlockargs(struct rpc_rqst *, u32 *, struct nlm_args *);
+ */
+extern const struct rpc_version nlm_version4;
+
+#endif /* LOCKD_XDR4_H */
diff --git a/include/linux/lockdep.h b/include/linux/lockdep.h
new file mode 100644
index 00000000..d36619ea
--- /dev/null
+++ b/include/linux/lockdep.h
@@ -0,0 +1,558 @@
+/*
+ * Runtime locking correctness validator
+ *
+ *  Copyright (C) 2006,2007 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
+ *  Copyright (C) 2007 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
+ *
+ * see Documentation/lockdep-design.txt for more details.
+ */
+#ifndef __LINUX_LOCKDEP_H
+#define __LINUX_LOCKDEP_H
+
+struct task_struct;
+struct lockdep_map;
+
+/* for sysctl */
+extern int prove_locking;
+extern int lock_stat;
+
+#ifdef CONFIG_LOCKDEP
+
+#include <linux/linkage.h>
+#include <linux/list.h>
+#include <linux/debug_locks.h>
+#include <linux/stacktrace.h>
+
+/*
+ * We'd rather not expose kernel/lockdep_states.h this wide, but we do need
+ * the total number of states... :-(
+ */
+#define XXX_LOCK_USAGE_STATES		(1+3*4)
+
+#define MAX_LOCKDEP_SUBCLASSES		8UL
+
+/*
+ * NR_LOCKDEP_CACHING_CLASSES ... Number of classes
+ * cached in the instance of lockdep_map
+ *
+ * Currently main class (subclass == 0) and signle depth subclass
+ * are cached in lockdep_map. This optimization is mainly targeting
+ * on rq->lock. double_rq_lock() acquires this highly competitive with
+ * single depth.
+ */
+#define NR_LOCKDEP_CACHING_CLASSES	2
+
+/*
+ * Lock-classes are keyed via unique addresses, by embedding the
+ * lockclass-key into the kernel (or module) .data section. (For
+ * static locks we use the lock address itself as the key.)
+ */
+struct lockdep_subclass_key {
+	char __one_byte;
+} __attribute__ ((__packed__));
+
+struct lock_class_key {
+	struct lockdep_subclass_key	subkeys[MAX_LOCKDEP_SUBCLASSES];
+};
+
+extern struct lock_class_key __lockdep_no_validate__;
+
+#define LOCKSTAT_POINTS		4
+
+/*
+ * The lock-class itself:
+ */
+struct lock_class {
+	/*
+	 * class-hash:
+	 */
+	struct list_head		hash_entry;
+
+	/*
+	 * global list of all lock-classes:
+	 */
+	struct list_head		lock_entry;
+
+	struct lockdep_subclass_key	*key;
+	unsigned int			subclass;
+	unsigned int			dep_gen_id;
+
+	/*
+	 * IRQ/softirq usage tracking bits:
+	 */
+	unsigned long			usage_mask;
+	struct stack_trace		usage_traces[XXX_LOCK_USAGE_STATES];
+
+	/*
+	 * These fields represent a directed graph of lock dependencies,
+	 * to every node we attach a list of "forward" and a list of
+	 * "backward" graph nodes.
+	 */
+	struct list_head		locks_after, locks_before;
+
+	/*
+	 * Generation counter, when doing certain classes of graph walking,
+	 * to ensure that we check one node only once:
+	 */
+	unsigned int			version;
+
+	/*
+	 * Statistics counter:
+	 */
+	unsigned long			ops;
+
+	const char			*name;
+	int				name_version;
+
+#ifdef CONFIG_LOCK_STAT
+	unsigned long			contention_point[LOCKSTAT_POINTS];
+	unsigned long			contending_point[LOCKSTAT_POINTS];
+#endif
+};
+
+#ifdef CONFIG_LOCK_STAT
+struct lock_time {
+	s64				min;
+	s64				max;
+	s64				total;
+	unsigned long			nr;
+};
+
+enum bounce_type {
+	bounce_acquired_write,
+	bounce_acquired_read,
+	bounce_contended_write,
+	bounce_contended_read,
+	nr_bounce_types,
+
+	bounce_acquired = bounce_acquired_write,
+	bounce_contended = bounce_contended_write,
+};
+
+struct lock_class_stats {
+	unsigned long			contention_point[4];
+	unsigned long			contending_point[4];
+	struct lock_time		read_waittime;
+	struct lock_time		write_waittime;
+	struct lock_time		read_holdtime;
+	struct lock_time		write_holdtime;
+	unsigned long			bounces[nr_bounce_types];
+};
+
+struct lock_class_stats lock_stats(struct lock_class *class);
+void clear_lock_stats(struct lock_class *class);
+#endif
+
+/*
+ * Map the lock object (the lock instance) to the lock-class object.
+ * This is embedded into specific lock instances:
+ */
+struct lockdep_map {
+	struct lock_class_key		*key;
+	struct lock_class		*class_cache[NR_LOCKDEP_CACHING_CLASSES];
+	const char			*name;
+#ifdef CONFIG_LOCK_STAT
+	int				cpu;
+	unsigned long			ip;
+#endif
+};
+
+/*
+ * Every lock has a list of other locks that were taken after it.
+ * We only grow the list, never remove from it:
+ */
+struct lock_list {
+	struct list_head		entry;
+	struct lock_class		*class;
+	struct stack_trace		trace;
+	int				distance;
+
+	/*
+	 * The parent field is used to implement breadth-first search, and the
+	 * bit 0 is reused to indicate if the lock has been accessed in BFS.
+	 */
+	struct lock_list		*parent;
+};
+
+/*
+ * We record lock dependency chains, so that we can cache them:
+ */
+struct lock_chain {
+	u8				irq_context;
+	u8				depth;
+	u16				base;
+	struct list_head		entry;
+	u64				chain_key;
+};
+
+#define MAX_LOCKDEP_KEYS_BITS		13
+/*
+ * Subtract one because we offset hlock->class_idx by 1 in order
+ * to make 0 mean no class. This avoids overflowing the class_idx
+ * bitfield and hitting the BUG in hlock_class().
+ */
+#define MAX_LOCKDEP_KEYS		((1UL << MAX_LOCKDEP_KEYS_BITS) - 1)
+
+struct held_lock {
+	/*
+	 * One-way hash of the dependency chain up to this point. We
+	 * hash the hashes step by step as the dependency chain grows.
+	 *
+	 * We use it for dependency-caching and we skip detection
+	 * passes and dependency-updates if there is a cache-hit, so
+	 * it is absolutely critical for 100% coverage of the validator
+	 * to have a unique key value for every unique dependency path
+	 * that can occur in the system, to make a unique hash value
+	 * as likely as possible - hence the 64-bit width.
+	 *
+	 * The task struct holds the current hash value (initialized
+	 * with zero), here we store the previous hash value:
+	 */
+	u64				prev_chain_key;
+	unsigned long			acquire_ip;
+	struct lockdep_map		*instance;
+	struct lockdep_map		*nest_lock;
+#ifdef CONFIG_LOCK_STAT
+	u64 				waittime_stamp;
+	u64				holdtime_stamp;
+#endif
+	unsigned int			class_idx:MAX_LOCKDEP_KEYS_BITS;
+	/*
+	 * The lock-stack is unified in that the lock chains of interrupt
+	 * contexts nest ontop of process context chains, but we 'separate'
+	 * the hashes by starting with 0 if we cross into an interrupt
+	 * context, and we also keep do not add cross-context lock
+	 * dependencies - the lock usage graph walking covers that area
+	 * anyway, and we'd just unnecessarily increase the number of
+	 * dependencies otherwise. [Note: hardirq and softirq contexts
+	 * are separated from each other too.]
+	 *
+	 * The following field is used to detect when we cross into an
+	 * interrupt context:
+	 */
+	unsigned int irq_context:2; /* bit 0 - soft, bit 1 - hard */
+	unsigned int trylock:1;						/* 16 bits */
+
+	unsigned int read:2;        /* see lock_acquire() comment */
+	unsigned int check:2;       /* see lock_acquire() comment */
+	unsigned int hardirqs_off:1;
+	unsigned int references:11;					/* 32 bits */
+};
+
+/*
+ * Initialization, self-test and debugging-output methods:
+ */
+extern void lockdep_init(void);
+extern void lockdep_info(void);
+extern void lockdep_reset(void);
+extern void lockdep_reset_lock(struct lockdep_map *lock);
+extern void lockdep_free_key_range(void *start, unsigned long size);
+extern void lockdep_sys_exit(void);
+
+extern void lockdep_off(void);
+extern void lockdep_on(void);
+
+/*
+ * These methods are used by specific locking variants (spinlocks,
+ * rwlocks, mutexes and rwsems) to pass init/acquire/release events
+ * to lockdep:
+ */
+
+extern void lockdep_init_map(struct lockdep_map *lock, const char *name,
+			     struct lock_class_key *key, int subclass);
+
+/*
+ * To initialize a lockdep_map statically use this macro.
+ * Note that _name must not be NULL.
+ */
+#define STATIC_LOCKDEP_MAP_INIT(_name, _key) \
+	{ .name = (_name), .key = (void *)(_key), }
+
+/*
+ * Reinitialize a lock key - for cases where there is special locking or
+ * special initialization of locks so that the validator gets the scope
+ * of dependencies wrong: they are either too broad (they need a class-split)
+ * or they are too narrow (they suffer from a false class-split):
+ */
+#define lockdep_set_class(lock, key) \
+		lockdep_init_map(&(lock)->dep_map, #key, key, 0)
+#define lockdep_set_class_and_name(lock, key, name) \
+		lockdep_init_map(&(lock)->dep_map, name, key, 0)
+#define lockdep_set_class_and_subclass(lock, key, sub) \
+		lockdep_init_map(&(lock)->dep_map, #key, key, sub)
+#define lockdep_set_subclass(lock, sub)	\
+		lockdep_init_map(&(lock)->dep_map, #lock, \
+				 (lock)->dep_map.key, sub)
+
+#define lockdep_set_novalidate_class(lock) \
+	lockdep_set_class(lock, &__lockdep_no_validate__)
+/*
+ * Compare locking classes
+ */
+#define lockdep_match_class(lock, key) lockdep_match_key(&(lock)->dep_map, key)
+
+static inline int lockdep_match_key(struct lockdep_map *lock,
+				    struct lock_class_key *key)
+{
+	return lock->key == key;
+}
+
+/*
+ * Acquire a lock.
+ *
+ * Values for "read":
+ *
+ *   0: exclusive (write) acquire
+ *   1: read-acquire (no recursion allowed)
+ *   2: read-acquire with same-instance recursion allowed
+ *
+ * Values for check:
+ *
+ *   0: disabled
+ *   1: simple checks (freeing, held-at-exit-time, etc.)
+ *   2: full validation
+ */
+extern void lock_acquire(struct lockdep_map *lock, unsigned int subclass,
+			 int trylock, int read, int check,
+			 struct lockdep_map *nest_lock, unsigned long ip);
+
+extern void lock_release(struct lockdep_map *lock, int nested,
+			 unsigned long ip);
+
+#define lockdep_is_held(lock)	lock_is_held(&(lock)->dep_map)
+
+extern int lock_is_held(struct lockdep_map *lock);
+
+extern void lock_set_class(struct lockdep_map *lock, const char *name,
+			   struct lock_class_key *key, unsigned int subclass,
+			   unsigned long ip);
+
+static inline void lock_set_subclass(struct lockdep_map *lock,
+		unsigned int subclass, unsigned long ip)
+{
+	lock_set_class(lock, lock->name, lock->key, subclass, ip);
+}
+
+extern void lockdep_set_current_reclaim_state(gfp_t gfp_mask);
+extern void lockdep_clear_current_reclaim_state(void);
+extern void lockdep_trace_alloc(gfp_t mask);
+
+# define INIT_LOCKDEP				.lockdep_recursion = 0, .lockdep_reclaim_gfp = 0,
+
+#define lockdep_depth(tsk)	(debug_locks ? (tsk)->lockdep_depth : 0)
+
+#define lockdep_assert_held(l)	WARN_ON(debug_locks && !lockdep_is_held(l))
+
+#define lockdep_recursing(tsk)	((tsk)->lockdep_recursion)
+
+#else /* !LOCKDEP */
+
+static inline void lockdep_off(void)
+{
+}
+
+static inline void lockdep_on(void)
+{
+}
+
+# define lock_acquire(l, s, t, r, c, n, i)	do { } while (0)
+# define lock_release(l, n, i)			do { } while (0)
+# define lock_set_class(l, n, k, s, i)		do { } while (0)
+# define lock_set_subclass(l, s, i)		do { } while (0)
+# define lockdep_set_current_reclaim_state(g)	do { } while (0)
+# define lockdep_clear_current_reclaim_state()	do { } while (0)
+# define lockdep_trace_alloc(g)			do { } while (0)
+# define lockdep_init()				do { } while (0)
+# define lockdep_info()				do { } while (0)
+# define lockdep_init_map(lock, name, key, sub) \
+		do { (void)(name); (void)(key); } while (0)
+# define lockdep_set_class(lock, key)		do { (void)(key); } while (0)
+# define lockdep_set_class_and_name(lock, key, name) \
+		do { (void)(key); (void)(name); } while (0)
+#define lockdep_set_class_and_subclass(lock, key, sub) \
+		do { (void)(key); } while (0)
+#define lockdep_set_subclass(lock, sub)		do { } while (0)
+
+#define lockdep_set_novalidate_class(lock) do { } while (0)
+
+/*
+ * We don't define lockdep_match_class() and lockdep_match_key() for !LOCKDEP
+ * case since the result is not well defined and the caller should rather
+ * #ifdef the call himself.
+ */
+
+# define INIT_LOCKDEP
+# define lockdep_reset()		do { debug_locks = 1; } while (0)
+# define lockdep_free_key_range(start, size)	do { } while (0)
+# define lockdep_sys_exit() 			do { } while (0)
+/*
+ * The class key takes no space if lockdep is disabled:
+ */
+struct lock_class_key { };
+
+#define lockdep_depth(tsk)	(0)
+
+#define lockdep_assert_held(l)			do { } while (0)
+
+#define lockdep_recursing(tsk)			(0)
+
+#endif /* !LOCKDEP */
+
+#ifdef CONFIG_LOCK_STAT
+
+extern void lock_contended(struct lockdep_map *lock, unsigned long ip);
+extern void lock_acquired(struct lockdep_map *lock, unsigned long ip);
+
+#define LOCK_CONTENDED(_lock, try, lock)			\
+do {								\
+	if (!try(_lock)) {					\
+		lock_contended(&(_lock)->dep_map, _RET_IP_);	\
+		lock(_lock);					\
+	}							\
+	lock_acquired(&(_lock)->dep_map, _RET_IP_);			\
+} while (0)
+
+#else /* CONFIG_LOCK_STAT */
+
+#define lock_contended(lockdep_map, ip) do {} while (0)
+#define lock_acquired(lockdep_map, ip) do {} while (0)
+
+#define LOCK_CONTENDED(_lock, try, lock) \
+	lock(_lock)
+
+#endif /* CONFIG_LOCK_STAT */
+
+#ifdef CONFIG_LOCKDEP
+
+/*
+ * On lockdep we dont want the hand-coded irq-enable of
+ * _raw_*_lock_flags() code, because lockdep assumes
+ * that interrupts are not re-enabled during lock-acquire:
+ */
+#define LOCK_CONTENDED_FLAGS(_lock, try, lock, lockfl, flags) \
+	LOCK_CONTENDED((_lock), (try), (lock))
+
+#else /* CONFIG_LOCKDEP */
+
+#define LOCK_CONTENDED_FLAGS(_lock, try, lock, lockfl, flags) \
+	lockfl((_lock), (flags))
+
+#endif /* CONFIG_LOCKDEP */
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+extern void print_irqtrace_events(struct task_struct *curr);
+#else
+static inline void print_irqtrace_events(struct task_struct *curr)
+{
+}
+#endif
+
+/*
+ * For trivial one-depth nesting of a lock-class, the following
+ * global define can be used. (Subsystems with multiple levels
+ * of nesting should define their own lock-nesting subclasses.)
+ */
+#define SINGLE_DEPTH_NESTING			1
+
+/*
+ * Map the dependency ops to NOP or to real lockdep ops, depending
+ * on the per lock-class debug mode:
+ */
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# ifdef CONFIG_PROVE_LOCKING
+#  define spin_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 2, NULL, i)
+#  define spin_acquire_nest(l, s, t, n, i)	lock_acquire(l, s, t, 0, 2, n, i)
+# else
+#  define spin_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 1, NULL, i)
+#  define spin_acquire_nest(l, s, t, n, i)	lock_acquire(l, s, t, 0, 1, NULL, i)
+# endif
+# define spin_release(l, n, i)			lock_release(l, n, i)
+#else
+# define spin_acquire(l, s, t, i)		do { } while (0)
+# define spin_release(l, n, i)			do { } while (0)
+#endif
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# ifdef CONFIG_PROVE_LOCKING
+#  define rwlock_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 2, NULL, i)
+#  define rwlock_acquire_read(l, s, t, i)	lock_acquire(l, s, t, 2, 2, NULL, i)
+# else
+#  define rwlock_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 1, NULL, i)
+#  define rwlock_acquire_read(l, s, t, i)	lock_acquire(l, s, t, 2, 1, NULL, i)
+# endif
+# define rwlock_release(l, n, i)		lock_release(l, n, i)
+#else
+# define rwlock_acquire(l, s, t, i)		do { } while (0)
+# define rwlock_acquire_read(l, s, t, i)	do { } while (0)
+# define rwlock_release(l, n, i)		do { } while (0)
+#endif
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# ifdef CONFIG_PROVE_LOCKING
+#  define mutex_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 2, NULL, i)
+#  define mutex_acquire_nest(l, s, t, n, i)	lock_acquire(l, s, t, 0, 2, n, i)
+# else
+#  define mutex_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 1, NULL, i)
+#  define mutex_acquire_nest(l, s, t, n, i)	lock_acquire(l, s, t, 0, 1, n, i)
+# endif
+# define mutex_release(l, n, i)			lock_release(l, n, i)
+#else
+# define mutex_acquire(l, s, t, i)		do { } while (0)
+# define mutex_acquire_nest(l, s, t, n, i)	do { } while (0)
+# define mutex_release(l, n, i)			do { } while (0)
+#endif
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# ifdef CONFIG_PROVE_LOCKING
+#  define rwsem_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 2, NULL, i)
+#  define rwsem_acquire_read(l, s, t, i)	lock_acquire(l, s, t, 1, 2, NULL, i)
+# else
+#  define rwsem_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 1, NULL, i)
+#  define rwsem_acquire_read(l, s, t, i)	lock_acquire(l, s, t, 1, 1, NULL, i)
+# endif
+# define rwsem_release(l, n, i)			lock_release(l, n, i)
+#else
+# define rwsem_acquire(l, s, t, i)		do { } while (0)
+# define rwsem_acquire_read(l, s, t, i)		do { } while (0)
+# define rwsem_release(l, n, i)			do { } while (0)
+#endif
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# ifdef CONFIG_PROVE_LOCKING
+#  define lock_map_acquire(l)		lock_acquire(l, 0, 0, 0, 2, NULL, _THIS_IP_)
+#  define lock_map_acquire_read(l)	lock_acquire(l, 0, 0, 2, 2, NULL, _THIS_IP_)
+# else
+#  define lock_map_acquire(l)		lock_acquire(l, 0, 0, 0, 1, NULL, _THIS_IP_)
+#  define lock_map_acquire_read(l)	lock_acquire(l, 0, 0, 2, 1, NULL, _THIS_IP_)
+# endif
+# define lock_map_release(l)			lock_release(l, 1, _THIS_IP_)
+#else
+# define lock_map_acquire(l)			do { } while (0)
+# define lock_map_acquire_read(l)		do { } while (0)
+# define lock_map_release(l)			do { } while (0)
+#endif
+
+#ifdef CONFIG_PROVE_LOCKING
+# define might_lock(lock) 						\
+do {									\
+	typecheck(struct lockdep_map *, &(lock)->dep_map);		\
+	lock_acquire(&(lock)->dep_map, 0, 0, 0, 2, NULL, _THIS_IP_);	\
+	lock_release(&(lock)->dep_map, 0, _THIS_IP_);			\
+} while (0)
+# define might_lock_read(lock) 						\
+do {									\
+	typecheck(struct lockdep_map *, &(lock)->dep_map);		\
+	lock_acquire(&(lock)->dep_map, 0, 0, 1, 2, NULL, _THIS_IP_);	\
+	lock_release(&(lock)->dep_map, 0, _THIS_IP_);			\
+} while (0)
+#else
+# define might_lock(lock) do { } while (0)
+# define might_lock_read(lock) do { } while (0)
+#endif
+
+#ifdef CONFIG_PROVE_RCU
+void lockdep_rcu_suspicious(const char *file, const int line, const char *s);
+#endif
+
+#endif /* __LINUX_LOCKDEP_H */
diff --git a/include/linux/log2.h b/include/linux/log2.h
new file mode 100644
index 00000000..fd7ff3d9
--- /dev/null
+++ b/include/linux/log2.h
@@ -0,0 +1,208 @@
+/* Integer base 2 logarithm calculation
+ *
+ * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_LOG2_H
+#define _LINUX_LOG2_H
+
+#include <linux/types.h>
+#include <linux/bitops.h>
+
+/*
+ * deal with unrepresentable constant logarithms
+ */
+extern __attribute__((const, noreturn))
+int ____ilog2_NaN(void);
+
+/*
+ * non-constant log of base 2 calculators
+ * - the arch may override these in asm/bitops.h if they can be implemented
+ *   more efficiently than using fls() and fls64()
+ * - the arch is not required to handle n==0 if implementing the fallback
+ */
+#ifndef CONFIG_ARCH_HAS_ILOG2_U32
+static inline __attribute__((const))
+int __ilog2_u32(u32 n)
+{
+	return fls(n) - 1;
+}
+#endif
+
+#ifndef CONFIG_ARCH_HAS_ILOG2_U64
+static inline __attribute__((const))
+int __ilog2_u64(u64 n)
+{
+	return fls64(n) - 1;
+}
+#endif
+
+/*
+ *  Determine whether some value is a power of two, where zero is
+ * *not* considered a power of two.
+ */
+
+static inline __attribute__((const))
+bool is_power_of_2(unsigned long n)
+{
+	return (n != 0 && ((n & (n - 1)) == 0));
+}
+
+/*
+ * round up to nearest power of two
+ */
+static inline __attribute__((const))
+unsigned long __roundup_pow_of_two(unsigned long n)
+{
+	return 1UL << fls_long(n - 1);
+}
+
+/*
+ * round down to nearest power of two
+ */
+static inline __attribute__((const))
+unsigned long __rounddown_pow_of_two(unsigned long n)
+{
+	return 1UL << (fls_long(n) - 1);
+}
+
+/**
+ * ilog2 - log of base 2 of 32-bit or a 64-bit unsigned value
+ * @n - parameter
+ *
+ * constant-capable log of base 2 calculation
+ * - this can be used to initialise global variables from constant data, hence
+ *   the massive ternary operator construction
+ *
+ * selects the appropriately-sized optimised version depending on sizeof(n)
+ */
+#define ilog2(n)				\
+(						\
+	__builtin_constant_p(n) ? (		\
+		(n) < 1 ? ____ilog2_NaN() :	\
+		(n) & (1ULL << 63) ? 63 :	\
+		(n) & (1ULL << 62) ? 62 :	\
+		(n) & (1ULL << 61) ? 61 :	\
+		(n) & (1ULL << 60) ? 60 :	\
+		(n) & (1ULL << 59) ? 59 :	\
+		(n) & (1ULL << 58) ? 58 :	\
+		(n) & (1ULL << 57) ? 57 :	\
+		(n) & (1ULL << 56) ? 56 :	\
+		(n) & (1ULL << 55) ? 55 :	\
+		(n) & (1ULL << 54) ? 54 :	\
+		(n) & (1ULL << 53) ? 53 :	\
+		(n) & (1ULL << 52) ? 52 :	\
+		(n) & (1ULL << 51) ? 51 :	\
+		(n) & (1ULL << 50) ? 50 :	\
+		(n) & (1ULL << 49) ? 49 :	\
+		(n) & (1ULL << 48) ? 48 :	\
+		(n) & (1ULL << 47) ? 47 :	\
+		(n) & (1ULL << 46) ? 46 :	\
+		(n) & (1ULL << 45) ? 45 :	\
+		(n) & (1ULL << 44) ? 44 :	\
+		(n) & (1ULL << 43) ? 43 :	\
+		(n) & (1ULL << 42) ? 42 :	\
+		(n) & (1ULL << 41) ? 41 :	\
+		(n) & (1ULL << 40) ? 40 :	\
+		(n) & (1ULL << 39) ? 39 :	\
+		(n) & (1ULL << 38) ? 38 :	\
+		(n) & (1ULL << 37) ? 37 :	\
+		(n) & (1ULL << 36) ? 36 :	\
+		(n) & (1ULL << 35) ? 35 :	\
+		(n) & (1ULL << 34) ? 34 :	\
+		(n) & (1ULL << 33) ? 33 :	\
+		(n) & (1ULL << 32) ? 32 :	\
+		(n) & (1ULL << 31) ? 31 :	\
+		(n) & (1ULL << 30) ? 30 :	\
+		(n) & (1ULL << 29) ? 29 :	\
+		(n) & (1ULL << 28) ? 28 :	\
+		(n) & (1ULL << 27) ? 27 :	\
+		(n) & (1ULL << 26) ? 26 :	\
+		(n) & (1ULL << 25) ? 25 :	\
+		(n) & (1ULL << 24) ? 24 :	\
+		(n) & (1ULL << 23) ? 23 :	\
+		(n) & (1ULL << 22) ? 22 :	\
+		(n) & (1ULL << 21) ? 21 :	\
+		(n) & (1ULL << 20) ? 20 :	\
+		(n) & (1ULL << 19) ? 19 :	\
+		(n) & (1ULL << 18) ? 18 :	\
+		(n) & (1ULL << 17) ? 17 :	\
+		(n) & (1ULL << 16) ? 16 :	\
+		(n) & (1ULL << 15) ? 15 :	\
+		(n) & (1ULL << 14) ? 14 :	\
+		(n) & (1ULL << 13) ? 13 :	\
+		(n) & (1ULL << 12) ? 12 :	\
+		(n) & (1ULL << 11) ? 11 :	\
+		(n) & (1ULL << 10) ? 10 :	\
+		(n) & (1ULL <<  9) ?  9 :	\
+		(n) & (1ULL <<  8) ?  8 :	\
+		(n) & (1ULL <<  7) ?  7 :	\
+		(n) & (1ULL <<  6) ?  6 :	\
+		(n) & (1ULL <<  5) ?  5 :	\
+		(n) & (1ULL <<  4) ?  4 :	\
+		(n) & (1ULL <<  3) ?  3 :	\
+		(n) & (1ULL <<  2) ?  2 :	\
+		(n) & (1ULL <<  1) ?  1 :	\
+		(n) & (1ULL <<  0) ?  0 :	\
+		____ilog2_NaN()			\
+				   ) :		\
+	(sizeof(n) <= 4) ?			\
+	__ilog2_u32(n) :			\
+	__ilog2_u64(n)				\
+ )
+
+/**
+ * roundup_pow_of_two - round the given value up to nearest power of two
+ * @n - parameter
+ *
+ * round the given value up to the nearest power of two
+ * - the result is undefined when n == 0
+ * - this can be used to initialise global variables from constant data
+ */
+#define roundup_pow_of_two(n)			\
+(						\
+	__builtin_constant_p(n) ? (		\
+		(n == 1) ? 1 :			\
+		(1UL << (ilog2((n) - 1) + 1))	\
+				   ) :		\
+	__roundup_pow_of_two(n)			\
+ )
+
+/**
+ * rounddown_pow_of_two - round the given value down to nearest power of two
+ * @n - parameter
+ *
+ * round the given value down to the nearest power of two
+ * - the result is undefined when n == 0
+ * - this can be used to initialise global variables from constant data
+ */
+#define rounddown_pow_of_two(n)			\
+(						\
+	__builtin_constant_p(n) ? (		\
+		(1UL << ilog2(n))) :		\
+	__rounddown_pow_of_two(n)		\
+ )
+
+/**
+ * order_base_2 - calculate the (rounded up) base 2 order of the argument
+ * @n: parameter
+ *
+ * The first few values calculated by this routine:
+ *  ob2(0) = 0
+ *  ob2(1) = 0
+ *  ob2(2) = 1
+ *  ob2(3) = 2
+ *  ob2(4) = 2
+ *  ob2(5) = 3
+ *  ... and so on.
+ */
+
+#define order_base_2(n) ilog2(roundup_pow_of_two(n))
+
+#endif /* _LINUX_LOG2_H */
diff --git a/include/linux/loop.h b/include/linux/loop.h
new file mode 100644
index 00000000..11a41a8f
--- /dev/null
+++ b/include/linux/loop.h
@@ -0,0 +1,167 @@
+#ifndef _LINUX_LOOP_H
+#define _LINUX_LOOP_H
+
+/*
+ * include/linux/loop.h
+ *
+ * Written by Theodore Ts'o, 3/29/93.
+ *
+ * Copyright 1993 by Theodore Ts'o.  Redistribution of this file is
+ * permitted under the GNU General Public License.
+ */
+
+#define LO_NAME_SIZE	64
+#define LO_KEY_SIZE	32
+
+#ifdef __KERNEL__
+#include <linux/bio.h>
+#include <linux/blkdev.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+
+/* Possible states of device */
+enum {
+	Lo_unbound,
+	Lo_bound,
+	Lo_rundown,
+};
+
+struct loop_func_table;
+
+struct loop_device {
+	int		lo_number;
+	int		lo_refcnt;
+	loff_t		lo_offset;
+	loff_t		lo_sizelimit;
+	int		lo_flags;
+	int		(*transfer)(struct loop_device *, int cmd,
+				    struct page *raw_page, unsigned raw_off,
+				    struct page *loop_page, unsigned loop_off,
+				    int size, sector_t real_block);
+	char		lo_file_name[LO_NAME_SIZE];
+	char		lo_crypt_name[LO_NAME_SIZE];
+	char		lo_encrypt_key[LO_KEY_SIZE];
+	int		lo_encrypt_key_size;
+	struct loop_func_table *lo_encryption;
+	__u32           lo_init[2];
+	uid_t		lo_key_owner;	/* Who set the key */
+	int		(*ioctl)(struct loop_device *, int cmd, 
+				 unsigned long arg); 
+
+	struct file *	lo_backing_file;
+	struct block_device *lo_device;
+	unsigned	lo_blocksize;
+	void		*key_data; 
+
+	gfp_t		old_gfp_mask;
+
+	spinlock_t		lo_lock;
+	struct bio_list		lo_bio_list;
+	int			lo_state;
+	struct mutex		lo_ctl_mutex;
+	struct task_struct	*lo_thread;
+	wait_queue_head_t	lo_event;
+
+	struct request_queue	*lo_queue;
+	struct gendisk		*lo_disk;
+};
+
+#endif /* __KERNEL__ */
+
+/*
+ * Loop flags
+ */
+enum {
+	LO_FLAGS_READ_ONLY	= 1,
+	LO_FLAGS_AUTOCLEAR	= 4,
+	LO_FLAGS_PARTSCAN	= 8,
+};
+
+#include <asm/posix_types.h>	/* for __kernel_old_dev_t */
+#include <linux/types.h>	/* for __u64 */
+
+/* Backwards compatibility version */
+struct loop_info {
+	int		   lo_number;		/* ioctl r/o */
+	__kernel_old_dev_t lo_device; 		/* ioctl r/o */
+	unsigned long	   lo_inode; 		/* ioctl r/o */
+	__kernel_old_dev_t lo_rdevice; 		/* ioctl r/o */
+	int		   lo_offset;
+	int		   lo_encrypt_type;
+	int		   lo_encrypt_key_size; 	/* ioctl w/o */
+	int		   lo_flags;			/* ioctl r/o */
+	char		   lo_name[LO_NAME_SIZE];
+	unsigned char	   lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
+	unsigned long	   lo_init[2];
+	char		   reserved[4];
+};
+
+struct loop_info64 {
+	__u64		   lo_device;			/* ioctl r/o */
+	__u64		   lo_inode;			/* ioctl r/o */
+	__u64		   lo_rdevice;			/* ioctl r/o */
+	__u64		   lo_offset;
+	__u64		   lo_sizelimit;/* bytes, 0 == max available */
+	__u32		   lo_number;			/* ioctl r/o */
+	__u32		   lo_encrypt_type;
+	__u32		   lo_encrypt_key_size;		/* ioctl w/o */
+	__u32		   lo_flags;			/* ioctl r/o */
+	__u8		   lo_file_name[LO_NAME_SIZE];
+	__u8		   lo_crypt_name[LO_NAME_SIZE];
+	__u8		   lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
+	__u64		   lo_init[2];
+};
+
+/*
+ * Loop filter types
+ */
+
+#define LO_CRYPT_NONE		0
+#define LO_CRYPT_XOR		1
+#define LO_CRYPT_DES		2
+#define LO_CRYPT_FISH2		3    /* Twofish encryption */
+#define LO_CRYPT_BLOW		4
+#define LO_CRYPT_CAST128	5
+#define LO_CRYPT_IDEA		6
+#define LO_CRYPT_DUMMY		9
+#define LO_CRYPT_SKIPJACK	10
+#define LO_CRYPT_CRYPTOAPI	18
+#define MAX_LO_CRYPT		20
+
+#ifdef __KERNEL__
+/* Support for loadable transfer modules */
+struct loop_func_table {
+	int number;	/* filter type */ 
+	int (*transfer)(struct loop_device *lo, int cmd,
+			struct page *raw_page, unsigned raw_off,
+			struct page *loop_page, unsigned loop_off,
+			int size, sector_t real_block);
+	int (*init)(struct loop_device *, const struct loop_info64 *); 
+	/* release is called from loop_unregister_transfer or clr_fd */
+	int (*release)(struct loop_device *); 
+	int (*ioctl)(struct loop_device *, int cmd, unsigned long arg);
+	struct module *owner;
+}; 
+
+int loop_register_transfer(struct loop_func_table *funcs);
+int loop_unregister_transfer(int number); 
+
+#endif
+/*
+ * IOCTL commands --- we will commandeer 0x4C ('L')
+ */
+
+#define LOOP_SET_FD		0x4C00
+#define LOOP_CLR_FD		0x4C01
+#define LOOP_SET_STATUS		0x4C02
+#define LOOP_GET_STATUS		0x4C03
+#define LOOP_SET_STATUS64	0x4C04
+#define LOOP_GET_STATUS64	0x4C05
+#define LOOP_CHANGE_FD		0x4C06
+#define LOOP_SET_CAPACITY	0x4C07
+
+/* /dev/loop-control interface */
+#define LOOP_CTL_ADD		0x4C80
+#define LOOP_CTL_REMOVE		0x4C81
+#define LOOP_CTL_GET_FREE	0x4C82
+#endif
diff --git a/include/linux/lp.h b/include/linux/lp.h
new file mode 100644
index 00000000..0df024bf
--- /dev/null
+++ b/include/linux/lp.h
@@ -0,0 +1,191 @@
+#ifndef _LINUX_LP_H
+#define _LINUX_LP_H
+
+/*
+ * usr/include/linux/lp.h c.1991-1992 James Wiegand
+ * many modifications copyright (C) 1992 Michael K. Johnson
+ * Interrupt support added 1993 Nigel Gamble
+ * Removed 8255 status defines from inside __KERNEL__ Marcelo Tosatti 
+ */
+
+/*
+ * Per POSIX guidelines, this module reserves the LP and lp prefixes
+ * These are the lp_table[minor].flags flags...
+ */
+#define LP_EXIST 0x0001
+#define LP_SELEC 0x0002
+#define LP_BUSY	 0x0004
+#define LP_BUSY_BIT_POS 2
+#define LP_OFFL	 0x0008
+#define LP_NOPA  0x0010
+#define LP_ERR   0x0020
+#define LP_ABORT 0x0040
+#define LP_CAREFUL 0x0080 /* obsoleted -arca */
+#define LP_ABORTOPEN 0x0100
+
+#define LP_TRUST_IRQ_  0x0200 /* obsolete */
+#define LP_NO_REVERSE  0x0400 /* No reverse mode available. */
+#define LP_DATA_AVAIL  0x0800 /* Data is available. */
+
+/* 
+ * bit defines for 8255 status port
+ * base + 1
+ * accessed with LP_S(minor), which gets the byte...
+ */
+#define LP_PBUSY	0x80  /* inverted input, active high */
+#define LP_PACK		0x40  /* unchanged input, active low */
+#define LP_POUTPA	0x20  /* unchanged input, active high */
+#define LP_PSELECD	0x10  /* unchanged input, active high */
+#define LP_PERRORP	0x08  /* unchanged input, active low */
+
+/* timeout for each character.  This is relative to bus cycles -- it
+ * is the count in a busy loop.  THIS IS THE VALUE TO CHANGE if you
+ * have extremely slow printing, or if the machine seems to slow down
+ * a lot when you print.  If you have slow printing, increase this
+ * number and recompile, and if your system gets bogged down, decrease
+ * this number.  This can be changed with the tunelp(8) command as well.
+ */
+
+#define LP_INIT_CHAR 1000
+
+/* The parallel port specs apparently say that there needs to be
+ * a .5usec wait before and after the strobe.
+ */
+
+#define LP_INIT_WAIT 1
+
+/* This is the amount of time that the driver waits for the printer to
+ * catch up when the printer's buffer appears to be filled.  If you
+ * want to tune this and have a fast printer (i.e. HPIIIP), decrease
+ * this number, and if you have a slow printer, increase this number.
+ * This is in hundredths of a second, the default 2 being .05 second.
+ * Or use the tunelp(8) command, which is especially nice if you want
+ * change back and forth between character and graphics printing, which
+ * are wildly different...
+ */
+
+#define LP_INIT_TIME 2
+
+/* IOCTL numbers */
+#define LPCHAR   0x0601  /* corresponds to LP_INIT_CHAR */
+#define LPTIME   0x0602  /* corresponds to LP_INIT_TIME */
+#define LPABORT  0x0604  /* call with TRUE arg to abort on error,
+			    FALSE to retry.  Default is retry.  */
+#define LPSETIRQ 0x0605  /* call with new IRQ number,
+			    or 0 for polling (no IRQ) */
+#define LPGETIRQ 0x0606  /* get the current IRQ number */
+#define LPWAIT   0x0608  /* corresponds to LP_INIT_WAIT */
+/* NOTE: LPCAREFUL is obsoleted and it' s always the default right now -arca */
+#define LPCAREFUL   0x0609  /* call with TRUE arg to require out-of-paper, off-
+			    line, and error indicators good on all writes,
+			    FALSE to ignore them.  Default is ignore. */
+#define LPABORTOPEN 0x060a  /* call with TRUE arg to abort open() on error,
+			    FALSE to ignore error.  Default is ignore.  */
+#define LPGETSTATUS 0x060b  /* return LP_S(minor) */
+#define LPRESET     0x060c  /* reset printer */
+#ifdef LP_STATS
+#define LPGETSTATS  0x060d  /* get statistics (struct lp_stats) */
+#endif
+#define LPGETFLAGS  0x060e  /* get status flags */
+#define LPSETTIMEOUT 0x060f /* set parport timeout */
+
+/* timeout for printk'ing a timeout, in jiffies (100ths of a second).
+   This is also used for re-checking error conditions if LP_ABORT is
+   not set.  This is the default behavior. */
+
+#define LP_TIMEOUT_INTERRUPT	(60 * HZ)
+#define LP_TIMEOUT_POLLED	(10 * HZ)
+
+#ifdef __KERNEL__
+
+#include <linux/wait.h>
+#include <linux/mutex.h>
+
+/* Magic numbers for defining port-device mappings */
+#define LP_PARPORT_UNSPEC -4
+#define LP_PARPORT_AUTO -3
+#define LP_PARPORT_OFF -2
+#define LP_PARPORT_NONE -1
+
+#define LP_F(minor)	lp_table[(minor)].flags		/* flags for busy, etc. */
+#define LP_CHAR(minor)	lp_table[(minor)].chars		/* busy timeout */
+#define LP_TIME(minor)	lp_table[(minor)].time		/* wait time */
+#define LP_WAIT(minor)	lp_table[(minor)].wait		/* strobe wait */
+#define LP_IRQ(minor)	lp_table[(minor)].dev->port->irq /* interrupt # */
+					/* PARPORT_IRQ_NONE means polled */
+#ifdef LP_STATS
+#define LP_STAT(minor)	lp_table[(minor)].stats		/* statistics area */
+#endif
+#define LP_BUFFER_SIZE PAGE_SIZE
+
+#define LP_BASE(x)	lp_table[(x)].dev->port->base
+
+#ifdef LP_STATS
+struct lp_stats {
+	unsigned long chars;
+	unsigned long sleeps;
+	unsigned int maxrun;
+	unsigned int maxwait;
+	unsigned int meanwait;
+	unsigned int mdev;
+};
+#endif
+
+struct lp_struct {
+	struct pardevice *dev;
+	unsigned long flags;
+	unsigned int chars;
+	unsigned int time;
+	unsigned int wait;
+	char *lp_buffer;
+#ifdef LP_STATS
+	unsigned int lastcall;
+	unsigned int runchars;
+	struct lp_stats stats;
+#endif
+	wait_queue_head_t waitq;
+	unsigned int last_error;
+	struct mutex port_mutex;
+	wait_queue_head_t dataq;
+	long timeout;
+	unsigned int best_mode;
+	unsigned int current_mode;
+	unsigned long bits;
+};
+
+/*
+ * The following constants describe the various signals of the printer port
+ * hardware.  Note that the hardware inverts some signals and that some
+ * signals are active low.  An example is LP_STROBE, which must be programmed
+ * with 1 for being active and 0 for being inactive, because the strobe signal
+ * gets inverted, but it is also active low.
+ */
+
+
+/* 
+ * defines for 8255 control port
+ * base + 2 
+ * accessed with LP_C(minor)
+ */
+#define LP_PINTEN	0x10  /* high to read data in or-ed with data out */
+#define LP_PSELECP	0x08  /* inverted output, active low */
+#define LP_PINITP	0x04  /* unchanged output, active low */
+#define LP_PAUTOLF	0x02  /* inverted output, active low */
+#define LP_PSTROBE	0x01  /* short high output on raising edge */
+
+/* 
+ * the value written to ports to test existence. PC-style ports will 
+ * return the value written. AT-style ports will return 0. so why not
+ * make them the same ? 
+ */
+#define LP_DUMMY	0x00
+
+/*
+ * This is the port delay time, in microseconds.
+ * It is used only in the lp_init() and lp_reset() routine.
+ */
+#define LP_DELAY 	50
+
+#endif
+
+#endif
diff --git a/include/linux/lp855x.h b/include/linux/lp855x.h
new file mode 100644
index 00000000..781a490a
--- /dev/null
+++ b/include/linux/lp855x.h
@@ -0,0 +1,131 @@
+/*
+ * LP855x Backlight Driver
+ *
+ *			Copyright (C) 2011 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _LP855X_H
+#define _LP855X_H
+
+#define BL_CTL_SHFT	(0)
+#define BRT_MODE_SHFT	(1)
+#define BRT_MODE_MASK	(0x06)
+
+/* Enable backlight. Only valid when BRT_MODE=10(I2C only) */
+#define ENABLE_BL	(1)
+#define DISABLE_BL	(0)
+
+#define I2C_CONFIG(id)	id ## _I2C_CONFIG
+#define PWM_CONFIG(id)	id ## _PWM_CONFIG
+
+/* DEVICE CONTROL register - LP8550 */
+#define LP8550_PWM_CONFIG	(LP8550_PWM_ONLY << BRT_MODE_SHFT)
+#define LP8550_I2C_CONFIG	((ENABLE_BL << BL_CTL_SHFT) | \
+				(LP8550_I2C_ONLY << BRT_MODE_SHFT))
+
+/* DEVICE CONTROL register - LP8551 */
+#define LP8551_PWM_CONFIG	LP8550_PWM_CONFIG
+#define LP8551_I2C_CONFIG	LP8550_I2C_CONFIG
+
+/* DEVICE CONTROL register - LP8552 */
+#define LP8552_PWM_CONFIG	LP8550_PWM_CONFIG
+#define LP8552_I2C_CONFIG	LP8550_I2C_CONFIG
+
+/* DEVICE CONTROL register - LP8553 */
+#define LP8553_PWM_CONFIG	LP8550_PWM_CONFIG
+#define LP8553_I2C_CONFIG	LP8550_I2C_CONFIG
+
+/* DEVICE CONTROL register - LP8556 */
+#define LP8556_PWM_CONFIG	(LP8556_PWM_ONLY << BRT_MODE_SHFT)
+#define LP8556_COMB1_CONFIG	(LP8556_COMBINED1 << BRT_MODE_SHFT)
+#define LP8556_I2C_CONFIG	((ENABLE_BL << BL_CTL_SHFT) | \
+				(LP8556_I2C_ONLY << BRT_MODE_SHFT))
+#define LP8556_COMB2_CONFIG	(LP8556_COMBINED2 << BRT_MODE_SHFT)
+
+/* ROM area boundary */
+#define EEPROM_START	(0xA0)
+#define EEPROM_END	(0xA7)
+#define EPROM_START	(0xA0)
+#define EPROM_END	(0xAF)
+
+enum lp855x_chip_id {
+	LP8550,
+	LP8551,
+	LP8552,
+	LP8553,
+	LP8556,
+};
+
+enum lp855x_brightness_ctrl_mode {
+	PWM_BASED = 1,
+	REGISTER_BASED,
+};
+
+enum lp8550_brighntess_source {
+	LP8550_PWM_ONLY,
+	LP8550_I2C_ONLY = 2,
+};
+
+enum lp8551_brighntess_source {
+	LP8551_PWM_ONLY = LP8550_PWM_ONLY,
+	LP8551_I2C_ONLY = LP8550_I2C_ONLY,
+};
+
+enum lp8552_brighntess_source {
+	LP8552_PWM_ONLY = LP8550_PWM_ONLY,
+	LP8552_I2C_ONLY = LP8550_I2C_ONLY,
+};
+
+enum lp8553_brighntess_source {
+	LP8553_PWM_ONLY = LP8550_PWM_ONLY,
+	LP8553_I2C_ONLY = LP8550_I2C_ONLY,
+};
+
+enum lp8556_brightness_source {
+	LP8556_PWM_ONLY,
+	LP8556_COMBINED1,	/* pwm + i2c before the shaper block */
+	LP8556_I2C_ONLY,
+	LP8556_COMBINED2,	/* pwm + i2c after the shaper block */
+};
+
+struct lp855x_pwm_data {
+	void (*pwm_set_intensity) (int brightness, int max_brightness);
+	int (*pwm_get_intensity) (int max_brightness);
+};
+
+struct lp855x_rom_data {
+	u8 addr;
+	u8 val;
+};
+
+/**
+ * struct lp855x_platform_data
+ * @name : Backlight driver name. If it is not defined, default name is set.
+ * @mode : brightness control by pwm or lp855x register
+ * @device_control : value of DEVICE CONTROL register
+ * @initial_brightness : initial value of backlight brightness
+ * @pwm_data : platform specific pwm generation functions.
+		Only valid when mode is PWM_BASED.
+ * @load_new_rom_data :
+	0 : use default configuration data
+	1 : update values of eeprom or eprom registers on loading driver
+ * @size_program : total size of lp855x_rom_data
+ * @rom_data : list of new eeprom/eprom registers
+ */
+struct lp855x_platform_data {
+	char *name;
+	enum lp855x_brightness_ctrl_mode mode;
+	u8 device_control;
+	int initial_brightness;
+	struct lp855x_pwm_data pwm_data;
+	u8 load_new_rom_data;
+	int size_program;
+	struct lp855x_rom_data *rom_data;
+};
+
+#endif
diff --git a/include/linux/lp8727.h b/include/linux/lp8727.h
new file mode 100644
index 00000000..ea98c613
--- /dev/null
+++ b/include/linux/lp8727.h
@@ -0,0 +1,65 @@
+/*
+ * LP8727 Micro/Mini USB IC with integrated charger
+ *
+ *			Copyright (C) 2011 Texas Instruments
+ *			Copyright (C) 2011 National Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _LP8727_H
+#define _LP8727_H
+
+enum lp8727_eoc_level {
+	EOC_5P,
+	EOC_10P,
+	EOC_16P,
+	EOC_20P,
+	EOC_25P,
+	EOC_33P,
+	EOC_50P,
+};
+
+enum lp8727_ichg {
+	ICHG_90mA,
+	ICHG_100mA,
+	ICHG_400mA,
+	ICHG_450mA,
+	ICHG_500mA,
+	ICHG_600mA,
+	ICHG_700mA,
+	ICHG_800mA,
+	ICHG_900mA,
+	ICHG_1000mA,
+};
+
+/**
+ * struct lp8727_chg_param
+ * @eoc_level : end of charge level setting
+ * @ichg : charging current
+ */
+struct lp8727_chg_param {
+	enum lp8727_eoc_level eoc_level;
+	enum lp8727_ichg ichg;
+};
+
+/**
+ * struct lp8727_platform_data
+ * @get_batt_present : check battery status - exists or not
+ * @get_batt_level : get battery voltage (mV)
+ * @get_batt_capacity : get battery capacity (%)
+ * @get_batt_temp : get battery temperature
+ * @ac, @usb : charging parameters each charger type
+ */
+struct lp8727_platform_data {
+	u8 (*get_batt_present)(void);
+	u16 (*get_batt_level)(void);
+	u8 (*get_batt_capacity)(void);
+	u8 (*get_batt_temp)(void);
+	struct lp8727_chg_param ac;
+	struct lp8727_chg_param usb;
+};
+
+#endif
diff --git a/include/linux/lru_cache.h b/include/linux/lru_cache.h
new file mode 100644
index 00000000..7a71ffad
--- /dev/null
+++ b/include/linux/lru_cache.h
@@ -0,0 +1,294 @@
+/*
+   lru_cache.c
+
+   This file is part of DRBD by Philipp Reisner and Lars Ellenberg.
+
+   Copyright (C) 2003-2008, LINBIT Information Technologies GmbH.
+   Copyright (C) 2003-2008, Philipp Reisner <philipp.reisner@linbit.com>.
+   Copyright (C) 2003-2008, Lars Ellenberg <lars.ellenberg@linbit.com>.
+
+   drbd is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+
+   drbd is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with drbd; see the file COPYING.  If not, write to
+   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ */
+
+#ifndef LRU_CACHE_H
+#define LRU_CACHE_H
+
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+#include <linux/string.h> /* for memset */
+#include <linux/seq_file.h>
+
+/*
+This header file (and its .c file; kernel-doc of functions see there)
+  define a helper framework to easily keep track of index:label associations,
+  and changes to an "active set" of objects, as well as pending transactions,
+  to persistently record those changes.
+
+  We use an LRU policy if it is necessary to "cool down" a region currently in
+  the active set before we can "heat" a previously unused region.
+
+  Because of this later property, it is called "lru_cache".
+  As it actually Tracks Objects in an Active SeT, we could also call it
+  toast (incidentally that is what may happen to the data on the
+  backend storage uppon next resync, if we don't get it right).
+
+What for?
+
+We replicate IO (more or less synchronously) to local and remote disk.
+
+For crash recovery after replication node failure,
+  we need to resync all regions that have been target of in-flight WRITE IO
+  (in use, or "hot", regions), as we don't know wether or not those WRITEs have
+  made it to stable storage.
+
+  To avoid a "full resync", we need to persistently track these regions.
+
+  This is known as "write intent log", and can be implemented as on-disk
+  (coarse or fine grained) bitmap, or other meta data.
+
+  To avoid the overhead of frequent extra writes to this meta data area,
+  usually the condition is softened to regions that _may_ have been target of
+  in-flight WRITE IO, e.g. by only lazily clearing the on-disk write-intent
+  bitmap, trading frequency of meta data transactions against amount of
+  (possibly unnecessary) resync traffic.
+
+  If we set a hard limit on the area that may be "hot" at any given time, we
+  limit the amount of resync traffic needed for crash recovery.
+
+For recovery after replication link failure,
+  we need to resync all blocks that have been changed on the other replica
+  in the mean time, or, if both replica have been changed independently [*],
+  all blocks that have been changed on either replica in the mean time.
+  [*] usually as a result of a cluster split-brain and insufficient protection.
+      but there are valid use cases to do this on purpose.
+
+  Tracking those blocks can be implemented as "dirty bitmap".
+  Having it fine-grained reduces the amount of resync traffic.
+  It should also be persistent, to allow for reboots (or crashes)
+  while the replication link is down.
+
+There are various possible implementations for persistently storing
+write intent log information, three of which are mentioned here.
+
+"Chunk dirtying"
+  The on-disk "dirty bitmap" may be re-used as "write-intent" bitmap as well.
+  To reduce the frequency of bitmap updates for write-intent log purposes,
+  one could dirty "chunks" (of some size) at a time of the (fine grained)
+  on-disk bitmap, while keeping the in-memory "dirty" bitmap as clean as
+  possible, flushing it to disk again when a previously "hot" (and on-disk
+  dirtied as full chunk) area "cools down" again (no IO in flight anymore,
+  and none expected in the near future either).
+
+"Explicit (coarse) write intent bitmap"
+  An other implementation could chose a (probably coarse) explicit bitmap,
+  for write-intent log purposes, additionally to the fine grained dirty bitmap.
+
+"Activity log"
+  Yet an other implementation may keep track of the hot regions, by starting
+  with an empty set, and writing down a journal of region numbers that have
+  become "hot", or have "cooled down" again.
+
+  To be able to use a ring buffer for this journal of changes to the active
+  set, we not only record the actual changes to that set, but also record the
+  not changing members of the set in a round robin fashion. To do so, we use a
+  fixed (but configurable) number of slots which we can identify by index, and
+  associate region numbers (labels) with these indices.
+  For each transaction recording a change to the active set, we record the
+  change itself (index: -old_label, +new_label), and which index is associated
+  with which label (index: current_label) within a certain sliding window that
+  is moved further over the available indices with each such transaction.
+
+  Thus, for crash recovery, if the ringbuffer is sufficiently large, we can
+  accurately reconstruct the active set.
+
+  Sufficiently large depends only on maximum number of active objects, and the
+  size of the sliding window recording "index: current_label" associations within
+  each transaction.
+
+  This is what we call the "activity log".
+
+  Currently we need one activity log transaction per single label change, which
+  does not give much benefit over the "dirty chunks of bitmap" approach, other
+  than potentially less seeks.
+
+  We plan to change the transaction format to support multiple changes per
+  transaction, which then would reduce several (disjoint, "random") updates to
+  the bitmap into one transaction to the activity log ring buffer.
+*/
+
+/* this defines an element in a tracked set
+ * .colision is for hash table lookup.
+ * When we process a new IO request, we know its sector, thus can deduce the
+ * region number (label) easily.  To do the label -> object lookup without a
+ * full list walk, we use a simple hash table.
+ *
+ * .list is on one of three lists:
+ *  in_use: currently in use (refcnt > 0, lc_number != LC_FREE)
+ *     lru: unused but ready to be reused or recycled
+ *          (lc_refcnt == 0, lc_number != LC_FREE),
+ *    free: unused but ready to be recycled
+ *          (lc_refcnt == 0, lc_number == LC_FREE),
+ *
+ * an element is said to be "in the active set",
+ * if either on "in_use" or "lru", i.e. lc_number != LC_FREE.
+ *
+ * DRBD currently (May 2009) only uses 61 elements on the resync lru_cache
+ * (total memory usage 2 pages), and up to 3833 elements on the act_log
+ * lru_cache, totalling ~215 kB for 64bit architecture, ~53 pages.
+ *
+ * We usually do not actually free these objects again, but only "recycle"
+ * them, as the change "index: -old_label, +LC_FREE" would need a transaction
+ * as well.  Which also means that using a kmem_cache to allocate the objects
+ * from wastes some resources.
+ * But it avoids high order page allocations in kmalloc.
+ */
+struct lc_element {
+	struct hlist_node colision;
+	struct list_head list;		 /* LRU list or free list */
+	unsigned refcnt;
+	/* back "pointer" into lc_cache->element[index],
+	 * for paranoia, and for "lc_element_to_index" */
+	unsigned lc_index;
+	/* if we want to track a larger set of objects,
+	 * it needs to become arch independend u64 */
+	unsigned lc_number;
+
+	/* special label when on free list */
+#define LC_FREE (~0U)
+};
+
+struct lru_cache {
+	/* the least recently used item is kept at lru->prev */
+	struct list_head lru;
+	struct list_head free;
+	struct list_head in_use;
+
+	/* the pre-created kmem cache to allocate the objects from */
+	struct kmem_cache *lc_cache;
+
+	/* size of tracked objects, used to memset(,0,) them in lc_reset */
+	size_t element_size;
+	/* offset of struct lc_element member in the tracked object */
+	size_t element_off;
+
+	/* number of elements (indices) */
+	unsigned int  nr_elements;
+	/* Arbitrary limit on maximum tracked objects. Practical limit is much
+	 * lower due to allocation failures, probably. For typical use cases,
+	 * nr_elements should be a few thousand at most.
+	 * This also limits the maximum value of lc_element.lc_index, allowing the
+	 * 8 high bits of .lc_index to be overloaded with flags in the future. */
+#define LC_MAX_ACTIVE	(1<<24)
+
+	/* statistics */
+	unsigned used; /* number of lelements currently on in_use list */
+	unsigned long hits, misses, starving, dirty, changed;
+
+	/* see below: flag-bits for lru_cache */
+	unsigned long flags;
+
+	/* when changing the label of an index element */
+	unsigned int  new_number;
+
+	/* for paranoia when changing the label of an index element */
+	struct lc_element *changing_element;
+
+	void  *lc_private;
+	const char *name;
+
+	/* nr_elements there */
+	struct hlist_head *lc_slot;
+	struct lc_element **lc_element;
+};
+
+
+/* flag-bits for lru_cache */
+enum {
+	/* debugging aid, to catch concurrent access early.
+	 * user needs to guarantee exclusive access by proper locking! */
+	__LC_PARANOIA,
+	/* if we need to change the set, but currently there is a changing
+	 * transaction pending, we are "dirty", and must deferr further
+	 * changing requests */
+	__LC_DIRTY,
+	/* if we need to change the set, but currently there is no free nor
+	 * unused element available, we are "starving", and must not give out
+	 * further references, to guarantee that eventually some refcnt will
+	 * drop to zero and we will be able to make progress again, changing
+	 * the set, writing the transaction.
+	 * if the statistics say we are frequently starving,
+	 * nr_elements is too small. */
+	__LC_STARVING,
+};
+#define LC_PARANOIA (1<<__LC_PARANOIA)
+#define LC_DIRTY    (1<<__LC_DIRTY)
+#define LC_STARVING (1<<__LC_STARVING)
+
+extern struct lru_cache *lc_create(const char *name, struct kmem_cache *cache,
+		unsigned e_count, size_t e_size, size_t e_off);
+extern void lc_reset(struct lru_cache *lc);
+extern void lc_destroy(struct lru_cache *lc);
+extern void lc_set(struct lru_cache *lc, unsigned int enr, int index);
+extern void lc_del(struct lru_cache *lc, struct lc_element *element);
+
+extern struct lc_element *lc_try_get(struct lru_cache *lc, unsigned int enr);
+extern struct lc_element *lc_find(struct lru_cache *lc, unsigned int enr);
+extern struct lc_element *lc_get(struct lru_cache *lc, unsigned int enr);
+extern unsigned int lc_put(struct lru_cache *lc, struct lc_element *e);
+extern void lc_changed(struct lru_cache *lc, struct lc_element *e);
+
+struct seq_file;
+extern size_t lc_seq_printf_stats(struct seq_file *seq, struct lru_cache *lc);
+
+extern void lc_seq_dump_details(struct seq_file *seq, struct lru_cache *lc, char *utext,
+				void (*detail) (struct seq_file *, struct lc_element *));
+
+/**
+ * lc_try_lock - can be used to stop lc_get() from changing the tracked set
+ * @lc: the lru cache to operate on
+ *
+ * Note that the reference counts and order on the active and lru lists may
+ * still change.  Returns true if we acquired the lock.
+ */
+static inline int lc_try_lock(struct lru_cache *lc)
+{
+	return !test_and_set_bit(__LC_DIRTY, &lc->flags);
+}
+
+/**
+ * lc_unlock - unlock @lc, allow lc_get() to change the set again
+ * @lc: the lru cache to operate on
+ */
+static inline void lc_unlock(struct lru_cache *lc)
+{
+	clear_bit(__LC_DIRTY, &lc->flags);
+	smp_mb__after_clear_bit();
+}
+
+static inline int lc_is_used(struct lru_cache *lc, unsigned int enr)
+{
+	struct lc_element *e = lc_find(lc, enr);
+	return e && e->refcnt;
+}
+
+#define lc_entry(ptr, type, member) \
+	container_of(ptr, type, member)
+
+extern struct lc_element *lc_element_by_index(struct lru_cache *lc, unsigned i);
+extern unsigned int lc_index_of(struct lru_cache *lc, struct lc_element *e);
+
+#endif
diff --git a/include/linux/lsm_audit.h b/include/linux/lsm_audit.h
new file mode 100644
index 00000000..fad48aab
--- /dev/null
+++ b/include/linux/lsm_audit.h
@@ -0,0 +1,105 @@
+/*
+ * Common LSM logging functions
+ * Heavily borrowed from selinux/avc.h
+ *
+ * Author : Etienne BASSET  <etienne.basset@ensta.org>
+ *
+ * All credits to : Stephen Smalley, <sds@epoch.ncsc.mil>
+ * All BUGS to : Etienne BASSET  <etienne.basset@ensta.org>
+ */
+#ifndef _LSM_COMMON_LOGGING_
+#define _LSM_COMMON_LOGGING_
+
+#include <linux/stddef.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/kdev_t.h>
+#include <linux/spinlock.h>
+#include <linux/init.h>
+#include <linux/audit.h>
+#include <linux/in6.h>
+#include <linux/path.h>
+#include <linux/key.h>
+#include <linux/skbuff.h>
+
+struct lsm_network_audit {
+	int netif;
+	struct sock *sk;
+	u16 family;
+	__be16 dport;
+	__be16 sport;
+	union {
+		struct {
+			__be32 daddr;
+			__be32 saddr;
+		} v4;
+		struct {
+			struct in6_addr daddr;
+			struct in6_addr saddr;
+		} v6;
+	} fam;
+};
+
+/* Auxiliary data to use in generating the audit record. */
+struct common_audit_data {
+	char type;
+#define LSM_AUDIT_DATA_PATH	1
+#define LSM_AUDIT_DATA_NET	2
+#define LSM_AUDIT_DATA_CAP	3
+#define LSM_AUDIT_DATA_IPC	4
+#define LSM_AUDIT_DATA_TASK	5
+#define LSM_AUDIT_DATA_KEY	6
+#define LSM_AUDIT_DATA_NONE	7
+#define LSM_AUDIT_DATA_KMOD	8
+#define LSM_AUDIT_DATA_INODE	9
+#define LSM_AUDIT_DATA_DENTRY	10
+	struct task_struct *tsk;
+	union 	{
+		struct path path;
+		struct dentry *dentry;
+		struct inode *inode;
+		struct lsm_network_audit *net;
+		int cap;
+		int ipc_id;
+		struct task_struct *tsk;
+#ifdef CONFIG_KEYS
+		struct {
+			key_serial_t key;
+			char *key_desc;
+		} key_struct;
+#endif
+		char *kmod_name;
+	} u;
+	/* this union contains LSM specific data */
+	union {
+#ifdef CONFIG_SECURITY_SMACK
+		struct smack_audit_data *smack_audit_data;
+#endif
+#ifdef CONFIG_SECURITY_SELINUX
+		struct selinux_audit_data *selinux_audit_data;
+#endif
+#ifdef CONFIG_SECURITY_APPARMOR
+		struct apparmor_audit_data *apparmor_audit_data;
+#endif
+	}; /* per LSM data pointer union */
+};
+
+#define v4info fam.v4
+#define v6info fam.v6
+
+int ipv4_skb_to_auditdata(struct sk_buff *skb,
+		struct common_audit_data *ad, u8 *proto);
+
+int ipv6_skb_to_auditdata(struct sk_buff *skb,
+		struct common_audit_data *ad, u8 *proto);
+
+/* Initialize an LSM audit data structure. */
+#define COMMON_AUDIT_DATA_INIT(_d, _t) \
+	{ memset((_d), 0, sizeof(struct common_audit_data)); \
+	 (_d)->type = LSM_AUDIT_DATA_##_t; }
+
+void common_lsm_audit(struct common_audit_data *a,
+	void (*pre_audit)(struct audit_buffer *, void *),
+	void (*post_audit)(struct audit_buffer *, void *));
+
+#endif
diff --git a/include/linux/lz4.h b/include/linux/lz4.h
new file mode 100755
index 00000000..8bd8ad7e
--- /dev/null
+++ b/include/linux/lz4.h
@@ -0,0 +1,89 @@
+#ifndef __LZ4_H__
+#define __LZ4_H__
+/*
+ * LZ4 Kernel Interface
+ *
+ * Copyright (C) 2013, LG Electronics, Kyungsik Lee <kyungsik.lee@lge.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define LZ4_MEM_COMPRESS	(4096 * sizeof(unsigned char *))
+#define LZ4HC_MEM_COMPRESS	(65538 * sizeof(unsigned char *))
+
+#define lz4_worst_compress(x) ((x) + ((x) / 255) + 16)
+
+/*
+ * lz4_compressbound()
+ * Provides the maximum size that LZ4 may output in a "worst case" scenario
+ * (input data not compressible)
+ */
+static inline size_t lz4_compressbound(size_t isize)
+{
+	return isize + (isize / 255) + 16;
+}
+
+/*
+ * lz4_compress()
+ *	src     : source address of the original data
+ *	src_len : size of the original data
+ *	dst	: output buffer address of the compressed data
+ *		This requires 'dst' of size LZ4_COMPRESSBOUND.
+ *	dst_len : is the output size, which is returned after compress done
+ *	workmem : address of the working memory.
+ *		This requires 'workmem' of size LZ4_MEM_COMPRESS.
+ *	return  : Success if return 0
+ *		  Error if return (< 0)
+ *	note :  Destination buffer and workmem must be already allocated with
+ *		the defined size.
+ */
+int lz4_compress(const unsigned char *src, size_t src_len,
+		unsigned char *dst, size_t *dst_len, void *wrkmem);
+
+ /*
+  * lz4hc_compress()
+  *	 src	 : source address of the original data
+  *	 src_len : size of the original data
+  *	 dst	 : output buffer address of the compressed data
+  *		This requires 'dst' of size LZ4_COMPRESSBOUND.
+  *	 dst_len : is the output size, which is returned after compress done
+  *	 workmem : address of the working memory.
+  *		This requires 'workmem' of size LZ4HC_MEM_COMPRESS.
+  *	 return  : Success if return 0
+  *		   Error if return (< 0)
+  *	 note :  Destination buffer and workmem must be already allocated with
+  *		 the defined size.
+  */
+int lz4hc_compress(const unsigned char *src, size_t src_len,
+		unsigned char *dst, size_t *dst_len, void *wrkmem);
+
+/*
+ * lz4_decompress()
+ *	src     : source address of the compressed data
+ *	src_len : is the input size, whcih is returned after decompress done
+ *	dest	: output buffer address of the decompressed data
+ *	actual_dest_len: is the size of uncompressed data, supposing it's known
+ *	return  : Success if return 0
+ *		  Error if return (< 0)
+ *	note :  Destination buffer must be already allocated.
+ *		slightly faster than lz4_decompress_unknownoutputsize()
+ */
+int lz4_decompress(const unsigned char *src, size_t *src_len,
+		unsigned char *dest, size_t actual_dest_len);
+
+/*
+ * lz4_decompress_unknownoutputsize()
+ *	src     : source address of the compressed data
+ *	src_len : is the input size, therefore the compressed size
+ *	dest	: output buffer address of the decompressed data
+ *	dest_len: is the max size of the destination buffer, which is
+ *			returned with actual size of decompressed data after
+ *			decompress done
+ *	return  : Success if return 0
+ *		  Error if return (< 0)
+ *	note :  Destination buffer must be already allocated.
+ */
+int lz4_decompress_unknownoutputsize(const unsigned char *src, size_t src_len,
+		unsigned char *dest, size_t *dest_len);
+#endif
diff --git a/include/linux/lzo.h b/include/linux/lzo.h
new file mode 100644
index 00000000..d793497e
--- /dev/null
+++ b/include/linux/lzo.h
@@ -0,0 +1,44 @@
+#ifndef __LZO_H__
+#define __LZO_H__
+/*
+ *  LZO Public Kernel Interface
+ *  A mini subset of the LZO real-time data compression library
+ *
+ *  Copyright (C) 1996-2005 Markus F.X.J. Oberhumer <markus@oberhumer.com>
+ *
+ *  The full LZO package can be found at:
+ *  http://www.oberhumer.com/opensource/lzo/
+ *
+ *  Changed for kernel use by:
+ *  Nitin Gupta <nitingupta910@gmail.com>
+ *  Richard Purdie <rpurdie@openedhand.com>
+ */
+
+#define LZO1X_MEM_COMPRESS	(16384 * sizeof(unsigned char *))
+#define LZO1X_1_MEM_COMPRESS	LZO1X_MEM_COMPRESS
+
+#define lzo1x_worst_compress(x) ((x) + ((x) / 16) + 64 + 3)
+
+/* This requires 'workmem' of size LZO1X_1_MEM_COMPRESS */
+int lzo1x_1_compress(const unsigned char *src, size_t src_len,
+			unsigned char *dst, size_t *dst_len, void *wrkmem);
+
+/* safe decompression with overrun testing */
+int lzo1x_decompress_safe(const unsigned char *src, size_t src_len,
+			unsigned char *dst, size_t *dst_len);
+
+/*
+ * Return values (< 0 = Error)
+ */
+#define LZO_E_OK			0
+#define LZO_E_ERROR			(-1)
+#define LZO_E_OUT_OF_MEMORY		(-2)
+#define LZO_E_NOT_COMPRESSIBLE		(-3)
+#define LZO_E_INPUT_OVERRUN		(-4)
+#define LZO_E_OUTPUT_OVERRUN		(-5)
+#define LZO_E_LOOKBEHIND_OVERRUN	(-6)
+#define LZO_E_EOF_NOT_FOUND		(-7)
+#define LZO_E_INPUT_NOT_CONSUMED	(-8)
+#define LZO_E_NOT_YET_IMPLEMENTED	(-9)
+
+#endif
diff --git a/include/linux/m48t86.h b/include/linux/m48t86.h
new file mode 100644
index 00000000..915d6b4f
--- /dev/null
+++ b/include/linux/m48t86.h
@@ -0,0 +1,16 @@
+/*
+ * ST M48T86 / Dallas DS12887 RTC driver
+ * Copyright (c) 2006 Tower Technologies
+ *
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct m48t86_ops
+{
+	void (*writebyte)(unsigned char value, unsigned long addr);
+	unsigned char (*readbyte)(unsigned long addr);
+};
diff --git a/include/linux/mISDNdsp.h b/include/linux/mISDNdsp.h
new file mode 100644
index 00000000..41d1eeb9
--- /dev/null
+++ b/include/linux/mISDNdsp.h
@@ -0,0 +1,39 @@
+#ifndef __mISDNdsp_H__
+#define __mISDNdsp_H__
+
+struct mISDN_dsp_element_arg {
+	char	*name;
+	char	*def;
+	char	*desc;
+};
+
+struct mISDN_dsp_element {
+	char	*name;
+	void	*(*new)(const char *arg);
+	void	(*free)(void *p);
+	void	(*process_tx)(void *p, unsigned char *data, int len);
+	void	(*process_rx)(void *p, unsigned char *data, int len,
+			unsigned int txlen);
+	int	num_args;
+	struct mISDN_dsp_element_arg
+		*args;
+};
+
+extern int  mISDN_dsp_element_register(struct mISDN_dsp_element *elem);
+extern void mISDN_dsp_element_unregister(struct mISDN_dsp_element *elem);
+
+struct dsp_features {
+	int	hfc_id; /* unique id to identify the chip (or -1) */
+	int	hfc_dtmf; /* set if HFCmulti card supports dtmf */
+	int	hfc_conf; /* set if HFCmulti card supports conferences */
+	int	hfc_loops; /* set if card supports tone loops */
+	int	hfc_echocanhw; /* set if card supports echocancelation*/
+	int	pcm_id; /* unique id to identify the pcm bus (or -1) */
+	int	pcm_slots; /* number of slots on the pcm bus */
+	int	pcm_banks; /* number of IO banks of pcm bus */
+	int	unclocked; /* data is not clocked (has jitter/loss) */
+	int	unordered; /* data is unordered (packets have index) */
+};
+
+#endif
+
diff --git a/include/linux/mISDNhw.h b/include/linux/mISDNhw.h
new file mode 100644
index 00000000..4af84140
--- /dev/null
+++ b/include/linux/mISDNhw.h
@@ -0,0 +1,186 @@
+/*
+ *
+ * Author	Karsten Keil <kkeil@novell.com>
+ *
+ *   Basic declarations for the mISDN HW channels
+ *
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef MISDNHW_H
+#define MISDNHW_H
+#include <linux/mISDNif.h>
+#include <linux/timer.h>
+
+/*
+ * HW DEBUG 0xHHHHGGGG
+ * H - hardware driver specific bits
+ * G - for all drivers
+ */
+
+#define DEBUG_HW		0x00000001
+#define DEBUG_HW_OPEN		0x00000002
+#define DEBUG_HW_DCHANNEL	0x00000100
+#define DEBUG_HW_DFIFO		0x00000200
+#define DEBUG_HW_BCHANNEL	0x00001000
+#define DEBUG_HW_BFIFO		0x00002000
+
+#define MAX_DFRAME_LEN_L1	300
+#define MAX_MON_FRAME		32
+#define MAX_LOG_SPACE		2048
+#define MISDN_COPY_SIZE		32
+
+/* channel->Flags bit field */
+#define FLG_TX_BUSY		0	/* tx_buf in use */
+#define FLG_TX_NEXT		1	/* next_skb in use */
+#define FLG_L1_BUSY		2	/* L1 is permanent busy */
+#define FLG_L2_ACTIVATED	3	/* activated from L2 */
+#define FLG_OPEN		5	/* channel is in use */
+#define FLG_ACTIVE		6	/* channel is activated */
+#define FLG_BUSY_TIMER		7
+/* channel type */
+#define FLG_DCHANNEL		8	/* channel is D-channel */
+#define FLG_BCHANNEL		9	/* channel is B-channel */
+#define FLG_ECHANNEL		10	/* channel is E-channel */
+#define FLG_TRANSPARENT		12	/* channel use transparent data */
+#define FLG_HDLC		13	/* channel use hdlc data */
+#define FLG_L2DATA		14	/* channel use L2 DATA primitivs */
+#define FLG_ORIGIN		15	/* channel is on origin site */
+/* channel specific stuff */
+#define FLG_FILLEMPTY		16	/* fill fifo on first frame (empty) */
+/* arcofi specific */
+#define FLG_ARCOFI_TIMER	17
+#define FLG_ARCOFI_ERROR	18
+/* isar specific */
+#define FLG_INITIALIZED		17
+#define FLG_DLEETX		18
+#define FLG_LASTDLE		19
+#define FLG_FIRST		20
+#define FLG_LASTDATA		21
+#define FLG_NMD_DATA		22
+#define FLG_FTI_RUN		23
+#define FLG_LL_OK		24
+#define FLG_LL_CONN		25
+#define FLG_DTMFSEND		26
+
+/* workq events */
+#define FLG_RECVQUEUE		30
+#define	FLG_PHCHANGE		31
+
+#define schedule_event(s, ev)	do { \
+					test_and_set_bit(ev, &((s)->Flags)); \
+					schedule_work(&((s)->workq)); \
+				} while (0)
+
+struct dchannel {
+	struct mISDNdevice	dev;
+	u_long			Flags;
+	struct work_struct	workq;
+	void			(*phfunc) (struct dchannel *);
+	u_int			state;
+	void			*l1;
+	void			*hw;
+	int			slot;	/* multiport card channel slot */
+	struct timer_list	timer;
+	/* receive data */
+	struct sk_buff		*rx_skb;
+	int			maxlen;
+	/* send data */
+	struct sk_buff_head	squeue;
+	struct sk_buff_head	rqueue;
+	struct sk_buff		*tx_skb;
+	int			tx_idx;
+	int			debug;
+	/* statistics */
+	int			err_crc;
+	int			err_tx;
+	int			err_rx;
+};
+
+typedef int	(dchannel_l1callback)(struct dchannel *, u_int);
+extern int	create_l1(struct dchannel *, dchannel_l1callback *);
+
+/* private L1 commands */
+#define INFO0		0x8002
+#define INFO1		0x8102
+#define INFO2		0x8202
+#define INFO3_P8	0x8302
+#define INFO3_P10	0x8402
+#define INFO4_P8	0x8502
+#define INFO4_P10	0x8602
+#define LOSTFRAMING	0x8702
+#define ANYSIGNAL	0x8802
+#define HW_POWERDOWN	0x8902
+#define HW_RESET_REQ	0x8a02
+#define HW_POWERUP_REQ	0x8b02
+#define HW_DEACT_REQ	0x8c02
+#define HW_ACTIVATE_REQ	0x8e02
+#define HW_D_NOBLOCKED  0x8f02
+#define HW_RESET_IND	0x9002
+#define HW_POWERUP_IND	0x9102
+#define HW_DEACT_IND	0x9202
+#define HW_ACTIVATE_IND	0x9302
+#define HW_DEACT_CNF	0x9402
+#define HW_TESTLOOP	0x9502
+#define HW_TESTRX_RAW	0x9602
+#define HW_TESTRX_HDLC	0x9702
+#define HW_TESTRX_OFF	0x9802
+
+struct layer1;
+extern int	l1_event(struct layer1 *, u_int);
+
+
+struct bchannel {
+	struct mISDNchannel	ch;
+	int			nr;
+	u_long			Flags;
+	struct work_struct	workq;
+	u_int			state;
+	void			*hw;
+	int			slot;	/* multiport card channel slot */
+	struct timer_list	timer;
+	/* receive data */
+	struct sk_buff		*rx_skb;
+	int			maxlen;
+	/* send data */
+	struct sk_buff		*next_skb;
+	struct sk_buff		*tx_skb;
+	struct sk_buff_head	rqueue;
+	int			rcount;
+	int			tx_idx;
+	int			debug;
+	/* statistics */
+	int			err_crc;
+	int			err_tx;
+	int			err_rx;
+};
+
+extern int	mISDN_initdchannel(struct dchannel *, int, void *);
+extern int	mISDN_initbchannel(struct bchannel *, int);
+extern int	mISDN_freedchannel(struct dchannel *);
+extern void	mISDN_clear_bchannel(struct bchannel *);
+extern int	mISDN_freebchannel(struct bchannel *);
+extern void	queue_ch_frame(struct mISDNchannel *, u_int,
+			int, struct sk_buff *);
+extern int	dchannel_senddata(struct dchannel *, struct sk_buff *);
+extern int	bchannel_senddata(struct bchannel *, struct sk_buff *);
+extern void	recv_Dchannel(struct dchannel *);
+extern void	recv_Echannel(struct dchannel *, struct dchannel *);
+extern void	recv_Bchannel(struct bchannel *, unsigned int id);
+extern void	recv_Dchannel_skb(struct dchannel *, struct sk_buff *);
+extern void	recv_Bchannel_skb(struct bchannel *, struct sk_buff *);
+extern void	confirm_Bsend(struct bchannel *bch);
+extern int	get_next_bframe(struct bchannel *);
+extern int	get_next_dframe(struct dchannel *);
+
+#endif
diff --git a/include/linux/mISDNif.h b/include/linux/mISDNif.h
new file mode 100644
index 00000000..b5e7f220
--- /dev/null
+++ b/include/linux/mISDNif.h
@@ -0,0 +1,590 @@
+/*
+ *
+ * Author	Karsten Keil <kkeil@novell.com>
+ *
+ * Copyright 2008  by Karsten Keil <kkeil@novell.com>
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU LESSER GENERAL PUBLIC LICENSE
+ * version 2.1 as published by the Free Software Foundation.
+ *
+ * This code is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU LESSER GENERAL PUBLIC LICENSE for more details.
+ *
+ */
+
+#ifndef mISDNIF_H
+#define mISDNIF_H
+
+#include <stdarg.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/socket.h>
+
+/*
+ * ABI Version 32 bit
+ *
+ * <8 bit> Major version
+ *		- changed if any interface become backwards incompatible
+ *
+ * <8 bit> Minor version
+ *              - changed if any interface is extended but backwards compatible
+ *
+ * <16 bit> Release number
+ *              - should be incremented on every checkin
+ */
+#define	MISDN_MAJOR_VERSION	1
+#define	MISDN_MINOR_VERSION	1
+#define MISDN_RELEASE		21
+
+/* primitives for information exchange
+ * generell format
+ * <16  bit  0 >
+ * <8  bit command>
+ *    BIT 8 = 1 LAYER private
+ *    BIT 7 = 1 answer
+ *    BIT 6 = 1 DATA
+ * <8  bit target layer mask>
+ *
+ * Layer = 00 is reserved for general commands
+   Layer = 01  L2 -> HW
+   Layer = 02  HW -> L2
+   Layer = 04  L3 -> L2
+   Layer = 08  L2 -> L3
+ * Layer = FF is reserved for broadcast commands
+ */
+
+#define MISDN_CMDMASK		0xff00
+#define MISDN_LAYERMASK		0x00ff
+
+/* generell commands */
+#define OPEN_CHANNEL		0x0100
+#define CLOSE_CHANNEL		0x0200
+#define CONTROL_CHANNEL		0x0300
+#define CHECK_DATA		0x0400
+
+/* layer 2 -> layer 1 */
+#define PH_ACTIVATE_REQ		0x0101
+#define PH_DEACTIVATE_REQ	0x0201
+#define PH_DATA_REQ		0x2001
+#define MPH_ACTIVATE_REQ	0x0501
+#define MPH_DEACTIVATE_REQ	0x0601
+#define MPH_INFORMATION_REQ	0x0701
+#define PH_CONTROL_REQ		0x0801
+
+/* layer 1 -> layer 2 */
+#define PH_ACTIVATE_IND		0x0102
+#define PH_ACTIVATE_CNF		0x4102
+#define PH_DEACTIVATE_IND	0x0202
+#define PH_DEACTIVATE_CNF	0x4202
+#define PH_DATA_IND		0x2002
+#define PH_DATA_E_IND		0x3002
+#define MPH_ACTIVATE_IND	0x0502
+#define MPH_DEACTIVATE_IND	0x0602
+#define MPH_INFORMATION_IND	0x0702
+#define PH_DATA_CNF		0x6002
+#define PH_CONTROL_IND		0x0802
+#define PH_CONTROL_CNF		0x4802
+
+/* layer 3 -> layer 2 */
+#define DL_ESTABLISH_REQ	0x1004
+#define DL_RELEASE_REQ		0x1104
+#define DL_DATA_REQ		0x3004
+#define DL_UNITDATA_REQ		0x3104
+#define DL_INFORMATION_REQ	0x0004
+
+/* layer 2 -> layer 3 */
+#define DL_ESTABLISH_IND	0x1008
+#define DL_ESTABLISH_CNF	0x5008
+#define DL_RELEASE_IND		0x1108
+#define DL_RELEASE_CNF		0x5108
+#define DL_DATA_IND		0x3008
+#define DL_UNITDATA_IND		0x3108
+#define DL_INFORMATION_IND	0x0008
+
+/* intern layer 2 management */
+#define MDL_ASSIGN_REQ		0x1804
+#define MDL_ASSIGN_IND		0x1904
+#define MDL_REMOVE_REQ		0x1A04
+#define MDL_REMOVE_IND		0x1B04
+#define MDL_STATUS_UP_IND	0x1C04
+#define MDL_STATUS_DOWN_IND	0x1D04
+#define MDL_STATUS_UI_IND	0x1E04
+#define MDL_ERROR_IND		0x1F04
+#define MDL_ERROR_RSP		0x5F04
+
+/* DL_INFORMATION_IND types */
+#define DL_INFO_L2_CONNECT	0x0001
+#define DL_INFO_L2_REMOVED	0x0002
+
+/* PH_CONTROL types */
+/* TOUCH TONE IS 0x20XX  XX "0"..."9", "A","B","C","D","*","#" */
+#define DTMF_TONE_VAL		0x2000
+#define DTMF_TONE_MASK		0x007F
+#define DTMF_TONE_START		0x2100
+#define DTMF_TONE_STOP		0x2200
+#define DTMF_HFC_COEF		0x4000
+#define DSP_CONF_JOIN		0x2403
+#define DSP_CONF_SPLIT		0x2404
+#define DSP_RECEIVE_OFF		0x2405
+#define DSP_RECEIVE_ON		0x2406
+#define DSP_ECHO_ON		0x2407
+#define DSP_ECHO_OFF		0x2408
+#define DSP_MIX_ON		0x2409
+#define DSP_MIX_OFF		0x240a
+#define DSP_DELAY		0x240b
+#define DSP_JITTER		0x240c
+#define DSP_TXDATA_ON		0x240d
+#define DSP_TXDATA_OFF		0x240e
+#define DSP_TX_DEJITTER		0x240f
+#define DSP_TX_DEJ_OFF		0x2410
+#define DSP_TONE_PATT_ON	0x2411
+#define DSP_TONE_PATT_OFF	0x2412
+#define DSP_VOL_CHANGE_TX	0x2413
+#define DSP_VOL_CHANGE_RX	0x2414
+#define DSP_BF_ENABLE_KEY	0x2415
+#define DSP_BF_DISABLE		0x2416
+#define DSP_BF_ACCEPT		0x2416
+#define DSP_BF_REJECT		0x2417
+#define DSP_PIPELINE_CFG	0x2418
+#define HFC_VOL_CHANGE_TX	0x2601
+#define HFC_VOL_CHANGE_RX	0x2602
+#define HFC_SPL_LOOP_ON		0x2603
+#define HFC_SPL_LOOP_OFF	0x2604
+/* for T30 FAX and analog modem */
+#define HW_MOD_FRM		0x4000
+#define HW_MOD_FRH		0x4001
+#define HW_MOD_FTM		0x4002
+#define HW_MOD_FTH		0x4003
+#define HW_MOD_FTS		0x4004
+#define HW_MOD_CONNECT		0x4010
+#define HW_MOD_OK		0x4011
+#define HW_MOD_NOCARR		0x4012
+#define HW_MOD_FCERROR		0x4013
+#define HW_MOD_READY		0x4014
+#define HW_MOD_LASTDATA		0x4015
+
+/* DSP_TONE_PATT_ON parameter */
+#define TONE_OFF			0x0000
+#define TONE_GERMAN_DIALTONE		0x0001
+#define TONE_GERMAN_OLDDIALTONE		0x0002
+#define TONE_AMERICAN_DIALTONE		0x0003
+#define TONE_GERMAN_DIALPBX		0x0004
+#define TONE_GERMAN_OLDDIALPBX		0x0005
+#define TONE_AMERICAN_DIALPBX		0x0006
+#define TONE_GERMAN_RINGING		0x0007
+#define TONE_GERMAN_OLDRINGING		0x0008
+#define TONE_AMERICAN_RINGPBX		0x000b
+#define TONE_GERMAN_RINGPBX		0x000c
+#define TONE_GERMAN_OLDRINGPBX		0x000d
+#define TONE_AMERICAN_RINGING		0x000e
+#define TONE_GERMAN_BUSY		0x000f
+#define TONE_GERMAN_OLDBUSY		0x0010
+#define TONE_AMERICAN_BUSY		0x0011
+#define TONE_GERMAN_HANGUP		0x0012
+#define TONE_GERMAN_OLDHANGUP		0x0013
+#define TONE_AMERICAN_HANGUP		0x0014
+#define TONE_SPECIAL_INFO		0x0015
+#define TONE_GERMAN_GASSENBESETZT	0x0016
+#define TONE_GERMAN_AUFSCHALTTON	0x0016
+
+/* MPH_INFORMATION_IND */
+#define L1_SIGNAL_LOS_OFF	0x0010
+#define L1_SIGNAL_LOS_ON	0x0011
+#define L1_SIGNAL_AIS_OFF	0x0012
+#define L1_SIGNAL_AIS_ON	0x0013
+#define L1_SIGNAL_RDI_OFF	0x0014
+#define L1_SIGNAL_RDI_ON	0x0015
+#define L1_SIGNAL_SLIP_RX	0x0020
+#define L1_SIGNAL_SLIP_TX	0x0021
+
+/*
+ * protocol ids
+ * D channel 1-31
+ * B channel 33 - 63
+ */
+
+#define ISDN_P_NONE		0
+#define ISDN_P_BASE		0
+#define ISDN_P_TE_S0		0x01
+#define ISDN_P_NT_S0  		0x02
+#define ISDN_P_TE_E1		0x03
+#define ISDN_P_NT_E1  		0x04
+#define ISDN_P_TE_UP0		0x05
+#define ISDN_P_NT_UP0		0x06
+
+#define IS_ISDN_P_TE(p) ((p == ISDN_P_TE_S0) || (p == ISDN_P_TE_E1) || \
+				(p == ISDN_P_TE_UP0) || (p == ISDN_P_LAPD_TE))
+#define IS_ISDN_P_NT(p) ((p == ISDN_P_NT_S0) || (p == ISDN_P_NT_E1) || \
+				(p == ISDN_P_NT_UP0) || (p == ISDN_P_LAPD_NT))
+#define IS_ISDN_P_S0(p) ((p == ISDN_P_TE_S0) || (p == ISDN_P_NT_S0))
+#define IS_ISDN_P_E1(p) ((p == ISDN_P_TE_E1) || (p == ISDN_P_NT_E1))
+#define IS_ISDN_P_UP0(p) ((p == ISDN_P_TE_UP0) || (p == ISDN_P_NT_UP0))
+
+
+#define ISDN_P_LAPD_TE		0x10
+#define	ISDN_P_LAPD_NT		0x11
+
+#define ISDN_P_B_MASK		0x1f
+#define ISDN_P_B_START		0x20
+
+#define ISDN_P_B_RAW		0x21
+#define ISDN_P_B_HDLC		0x22
+#define ISDN_P_B_X75SLP		0x23
+#define ISDN_P_B_L2DTMF		0x24
+#define ISDN_P_B_L2DSP		0x25
+#define ISDN_P_B_L2DSPHDLC	0x26
+#define ISDN_P_B_T30_FAX	0x27
+#define ISDN_P_B_MODEM_ASYNC	0x28
+
+#define OPTION_L2_PMX		1
+#define OPTION_L2_PTP		2
+#define OPTION_L2_FIXEDTEI	3
+#define OPTION_L2_CLEANUP	4
+#define OPTION_L1_HOLD		5
+
+/* should be in sync with linux/kobject.h:KOBJ_NAME_LEN */
+#define MISDN_MAX_IDLEN		20
+
+struct mISDNhead {
+	unsigned int	prim;
+	unsigned int	id;
+}  __packed;
+
+#define MISDN_HEADER_LEN	sizeof(struct mISDNhead)
+#define MAX_DATA_SIZE		2048
+#define MAX_DATA_MEM		(MAX_DATA_SIZE + MISDN_HEADER_LEN)
+#define MAX_DFRAME_LEN		260
+
+#define MISDN_ID_ADDR_MASK	0xFFFF
+#define MISDN_ID_TEI_MASK	0xFF00
+#define MISDN_ID_SAPI_MASK	0x00FF
+#define MISDN_ID_TEI_ANY	0x7F00
+
+#define MISDN_ID_ANY		0xFFFF
+#define MISDN_ID_NONE		0xFFFE
+
+#define GROUP_TEI		127
+#define TEI_SAPI		63
+#define CTRL_SAPI		0
+
+#define MISDN_MAX_CHANNEL	127
+#define MISDN_CHMAP_SIZE	((MISDN_MAX_CHANNEL + 1) >> 3)
+
+#define SOL_MISDN	0
+
+struct sockaddr_mISDN {
+	sa_family_t    family;
+	unsigned char	dev;
+	unsigned char	channel;
+	unsigned char	sapi;
+	unsigned char	tei;
+};
+
+struct mISDNversion {
+	unsigned char	major;
+	unsigned char	minor;
+	unsigned short	release;
+};
+
+struct mISDN_devinfo {
+	u_int			id;
+	u_int			Dprotocols;
+	u_int			Bprotocols;
+	u_int			protocol;
+	u_char			channelmap[MISDN_CHMAP_SIZE];
+	u_int			nrbchan;
+	char			name[MISDN_MAX_IDLEN];
+};
+
+struct mISDN_devrename {
+	u_int			id;
+	char			name[MISDN_MAX_IDLEN]; /* new name */
+};
+
+/* MPH_INFORMATION_REQ payload */
+struct ph_info_ch {
+	__u32 protocol;
+	__u64 Flags;
+};
+
+struct ph_info_dch {
+	struct ph_info_ch ch;
+	__u16 state;
+	__u16 num_bch;
+};
+
+struct ph_info {
+	struct ph_info_dch dch;
+	struct ph_info_ch  bch[];
+};
+
+/* timer device ioctl */
+#define IMADDTIMER	_IOR('I', 64, int)
+#define IMDELTIMER	_IOR('I', 65, int)
+
+/* socket ioctls */
+#define	IMGETVERSION	_IOR('I', 66, int)
+#define	IMGETCOUNT	_IOR('I', 67, int)
+#define IMGETDEVINFO	_IOR('I', 68, int)
+#define IMCTRLREQ	_IOR('I', 69, int)
+#define IMCLEAR_L2	_IOR('I', 70, int)
+#define IMSETDEVNAME	_IOR('I', 71, struct mISDN_devrename)
+#define IMHOLD_L1	_IOR('I', 72, int)
+
+static inline int
+test_channelmap(u_int nr, u_char *map)
+{
+	if (nr <= MISDN_MAX_CHANNEL)
+		return map[nr >> 3] & (1 << (nr & 7));
+	else
+		return 0;
+}
+
+static inline void
+set_channelmap(u_int nr, u_char *map)
+{
+	map[nr >> 3] |= (1 << (nr & 7));
+}
+
+static inline void
+clear_channelmap(u_int nr, u_char *map)
+{
+	map[nr >> 3] &= ~(1 << (nr & 7));
+}
+
+/* CONTROL_CHANNEL parameters */
+#define MISDN_CTRL_GETOP		0x0000
+#define MISDN_CTRL_LOOP			0x0001
+#define MISDN_CTRL_CONNECT		0x0002
+#define MISDN_CTRL_DISCONNECT		0x0004
+#define MISDN_CTRL_PCMCONNECT		0x0010
+#define MISDN_CTRL_PCMDISCONNECT	0x0020
+#define MISDN_CTRL_SETPEER		0x0040
+#define MISDN_CTRL_UNSETPEER		0x0080
+#define MISDN_CTRL_RX_OFF		0x0100
+#define MISDN_CTRL_FILL_EMPTY		0x0200
+#define MISDN_CTRL_GETPEER		0x0400
+#define MISDN_CTRL_HW_FEATURES_OP	0x2000
+#define MISDN_CTRL_HW_FEATURES		0x2001
+#define MISDN_CTRL_HFC_OP		0x4000
+#define MISDN_CTRL_HFC_PCM_CONN		0x4001
+#define MISDN_CTRL_HFC_PCM_DISC		0x4002
+#define MISDN_CTRL_HFC_CONF_JOIN	0x4003
+#define MISDN_CTRL_HFC_CONF_SPLIT	0x4004
+#define MISDN_CTRL_HFC_RECEIVE_OFF	0x4005
+#define MISDN_CTRL_HFC_RECEIVE_ON	0x4006
+#define MISDN_CTRL_HFC_ECHOCAN_ON 	0x4007
+#define MISDN_CTRL_HFC_ECHOCAN_OFF 	0x4008
+#define MISDN_CTRL_HFC_WD_INIT		0x4009
+#define MISDN_CTRL_HFC_WD_RESET		0x400A
+
+/* socket options */
+#define MISDN_TIME_STAMP		0x0001
+
+struct mISDN_ctrl_req {
+	int		op;
+	int		channel;
+	int		p1;
+	int		p2;
+};
+
+/* muxer options */
+#define MISDN_OPT_ALL		1
+#define MISDN_OPT_TEIMGR	2
+
+#ifdef __KERNEL__
+#include <linux/list.h>
+#include <linux/skbuff.h>
+#include <linux/net.h>
+#include <net/sock.h>
+#include <linux/completion.h>
+
+#define DEBUG_CORE		0x000000ff
+#define DEBUG_CORE_FUNC		0x00000002
+#define DEBUG_SOCKET		0x00000004
+#define DEBUG_MANAGER		0x00000008
+#define DEBUG_SEND_ERR		0x00000010
+#define DEBUG_MSG_THREAD	0x00000020
+#define DEBUG_QUEUE_FUNC	0x00000040
+#define DEBUG_L1		0x0000ff00
+#define DEBUG_L1_FSM		0x00000200
+#define DEBUG_L2		0x00ff0000
+#define DEBUG_L2_FSM		0x00020000
+#define DEBUG_L2_CTRL		0x00040000
+#define DEBUG_L2_RECV		0x00080000
+#define DEBUG_L2_TEI		0x00100000
+#define DEBUG_L2_TEIFSM		0x00200000
+#define DEBUG_TIMER		0x01000000
+#define DEBUG_CLOCK		0x02000000
+
+#define mISDN_HEAD_P(s)		((struct mISDNhead *)&s->cb[0])
+#define mISDN_HEAD_PRIM(s)	(((struct mISDNhead *)&s->cb[0])->prim)
+#define mISDN_HEAD_ID(s)	(((struct mISDNhead *)&s->cb[0])->id)
+
+/* socket states */
+#define MISDN_OPEN	1
+#define MISDN_BOUND	2
+#define MISDN_CLOSED	3
+
+struct mISDNchannel;
+struct mISDNdevice;
+struct mISDNstack;
+struct mISDNclock;
+
+struct channel_req {
+	u_int			protocol;
+	struct sockaddr_mISDN	adr;
+	struct mISDNchannel	*ch;
+};
+
+typedef	int	(ctrl_func_t)(struct mISDNchannel *, u_int, void *);
+typedef	int	(send_func_t)(struct mISDNchannel *, struct sk_buff *);
+typedef int	(create_func_t)(struct channel_req *);
+
+struct Bprotocol {
+	struct list_head	list;
+	char			*name;
+	u_int			Bprotocols;
+	create_func_t		*create;
+};
+
+struct mISDNchannel {
+	struct list_head	list;
+	u_int			protocol;
+	u_int			nr;
+	u_long			opt;
+	u_int			addr;
+	struct mISDNstack	*st;
+	struct mISDNchannel	*peer;
+	send_func_t		*send;
+	send_func_t		*recv;
+	ctrl_func_t		*ctrl;
+};
+
+struct mISDN_sock_list {
+	struct hlist_head	head;
+	rwlock_t		lock;
+};
+
+struct mISDN_sock {
+	struct sock		sk;
+	struct mISDNchannel	ch;
+	u_int			cmask;
+	struct mISDNdevice	*dev;
+};
+
+
+
+struct mISDNdevice {
+	struct mISDNchannel	D;
+	u_int			id;
+	u_int			Dprotocols;
+	u_int			Bprotocols;
+	u_int			nrbchan;
+	u_char			channelmap[MISDN_CHMAP_SIZE];
+	struct list_head	bchannels;
+	struct mISDNchannel	*teimgr;
+	struct device		dev;
+};
+
+struct mISDNstack {
+	u_long			status;
+	struct mISDNdevice	*dev;
+	struct task_struct	*thread;
+	struct completion	*notify;
+	wait_queue_head_t	workq;
+	struct sk_buff_head	msgq;
+	struct list_head	layer2;
+	struct mISDNchannel	*layer1;
+	struct mISDNchannel	own;
+	struct mutex		lmutex; /* protect lists */
+	struct mISDN_sock_list	l1sock;
+#ifdef MISDN_MSG_STATS
+	u_int			msg_cnt;
+	u_int			sleep_cnt;
+	u_int			stopped_cnt;
+#endif
+};
+
+typedef	int	(clockctl_func_t)(void *, int);
+
+struct	mISDNclock {
+	struct list_head	list;
+	char			name[64];
+	int			pri;
+	clockctl_func_t		*ctl;
+	void			*priv;
+};
+
+/* global alloc/queue functions */
+
+static inline struct sk_buff *
+mI_alloc_skb(unsigned int len, gfp_t gfp_mask)
+{
+	struct sk_buff	*skb;
+
+	skb = alloc_skb(len + MISDN_HEADER_LEN, gfp_mask);
+	if (likely(skb))
+		skb_reserve(skb, MISDN_HEADER_LEN);
+	return skb;
+}
+
+static inline struct sk_buff *
+_alloc_mISDN_skb(u_int prim, u_int id, u_int len, void *dp, gfp_t gfp_mask)
+{
+	struct sk_buff	*skb = mI_alloc_skb(len, gfp_mask);
+	struct mISDNhead *hh;
+
+	if (!skb)
+		return NULL;
+	if (len)
+		memcpy(skb_put(skb, len), dp, len);
+	hh = mISDN_HEAD_P(skb);
+	hh->prim = prim;
+	hh->id = id;
+	return skb;
+}
+
+static inline void
+_queue_data(struct mISDNchannel *ch, u_int prim,
+    u_int id, u_int len, void *dp, gfp_t gfp_mask)
+{
+	struct sk_buff		*skb;
+
+	if (!ch->peer)
+		return;
+	skb = _alloc_mISDN_skb(prim, id, len, dp, gfp_mask);
+	if (!skb)
+		return;
+	if (ch->recv(ch->peer, skb))
+		dev_kfree_skb(skb);
+}
+
+/* global register/unregister functions */
+
+extern int	mISDN_register_device(struct mISDNdevice *,
+					struct device *parent, char *name);
+extern void	mISDN_unregister_device(struct mISDNdevice *);
+extern int	mISDN_register_Bprotocol(struct Bprotocol *);
+extern void	mISDN_unregister_Bprotocol(struct Bprotocol *);
+extern struct mISDNclock *mISDN_register_clock(char *, int, clockctl_func_t *,
+						void *);
+extern void	mISDN_unregister_clock(struct mISDNclock *);
+
+static inline struct mISDNdevice *dev_to_mISDN(struct device *dev)
+{
+	if (dev)
+		return dev_get_drvdata(dev);
+	else
+		return NULL;
+}
+
+extern void	set_channel_address(struct mISDNchannel *, u_int, u_int);
+extern void	mISDN_clock_update(struct mISDNclock *, int, struct timeval *);
+extern unsigned short mISDN_clock_get(void);
+
+#endif /* __KERNEL__ */
+#endif /* mISDNIF_H */
diff --git a/include/linux/magic.h b/include/linux/magic.h
new file mode 100644
index 00000000..e15192cb
--- /dev/null
+++ b/include/linux/magic.h
@@ -0,0 +1,72 @@
+#ifndef __LINUX_MAGIC_H__
+#define __LINUX_MAGIC_H__
+
+#define ADFS_SUPER_MAGIC	0xadf5
+#define AFFS_SUPER_MAGIC	0xadff
+#define AFS_SUPER_MAGIC                0x5346414F
+#define AUTOFS_SUPER_MAGIC	0x0187
+#define CODA_SUPER_MAGIC	0x73757245
+#define CRAMFS_MAGIC		0x28cd3d45	/* some random number */
+#define CRAMFS_MAGIC_WEND	0x453dcd28	/* magic number with the wrong endianess */
+#define DEBUGFS_MAGIC          0x64626720
+#define SECURITYFS_MAGIC	0x73636673
+#define SELINUX_MAGIC		0xf97cff8c
+#define RAMFS_MAGIC		0x858458f6	/* some random number */
+#define TMPFS_MAGIC		0x01021994
+#define HUGETLBFS_MAGIC 	0x958458f6	/* some random number */
+#define SQUASHFS_MAGIC		0x73717368
+#define ECRYPTFS_SUPER_MAGIC	0xf15f
+#define EFS_SUPER_MAGIC		0x414A53
+#define EXT2_SUPER_MAGIC	0xEF53
+#define EXT3_SUPER_MAGIC	0xEF53
+#define XENFS_SUPER_MAGIC	0xabba1974
+#define EXT4_SUPER_MAGIC	0xEF53
+#define BTRFS_SUPER_MAGIC	0x9123683E
+#define NILFS_SUPER_MAGIC	0x3434
+#define HPFS_SUPER_MAGIC	0xf995e849
+#define ISOFS_SUPER_MAGIC	0x9660
+#define JFFS2_SUPER_MAGIC	0x72b6
+#define PSTOREFS_MAGIC		0x6165676C
+
+#define MINIX_SUPER_MAGIC	0x137F		/* minix v1 fs, 14 char names */
+#define MINIX_SUPER_MAGIC2	0x138F		/* minix v1 fs, 30 char names */
+#define MINIX2_SUPER_MAGIC	0x2468		/* minix v2 fs, 14 char names */
+#define MINIX2_SUPER_MAGIC2	0x2478		/* minix v2 fs, 30 char names */
+#define MINIX3_SUPER_MAGIC	0x4d5a		/* minix v3 fs, 60 char names */
+
+#define MSDOS_SUPER_MAGIC	0x4d44		/* MD */
+#define NCP_SUPER_MAGIC		0x564c		/* Guess, what 0x564c is :-) */
+#define NFS_SUPER_MAGIC		0x6969
+#define OPENPROM_SUPER_MAGIC	0x9fa1
+#define QNX4_SUPER_MAGIC	0x002f		/* qnx4 fs detection */
+#define QNX6_SUPER_MAGIC	0x68191122	/* qnx6 fs detection */
+
+#define REISERFS_SUPER_MAGIC	0x52654973	/* used by gcc */
+					/* used by file system utilities that
+	                                   look at the superblock, etc.  */
+#define REISERFS_SUPER_MAGIC_STRING	"ReIsErFs"
+#define REISER2FS_SUPER_MAGIC_STRING	"ReIsEr2Fs"
+#define REISER2FS_JR_SUPER_MAGIC_STRING	"ReIsEr3Fs"
+
+#define SMB_SUPER_MAGIC		0x517B
+#define CGROUP_SUPER_MAGIC	0x27e0eb
+
+
+#define STACK_END_MAGIC		0x57AC6E9D
+
+#define V9FS_MAGIC		0x01021997
+
+#define BDEVFS_MAGIC            0x62646576
+#define BINFMTFS_MAGIC          0x42494e4d
+#define DEVPTS_SUPER_MAGIC	0x1cd1
+#define FUTEXFS_SUPER_MAGIC	0xBAD1DEA
+#define PIPEFS_MAGIC            0x50495045
+#define PROC_SUPER_MAGIC	0x9fa0
+#define SOCKFS_MAGIC		0x534F434B
+#define SYSFS_MAGIC		0x62656572
+#define USBDEVICE_SUPER_MAGIC	0x9fa2
+#define MTD_INODE_FS_MAGIC      0x11307854
+#define ANON_INODE_FS_MAGIC	0x09041934
+
+
+#endif /* __LINUX_MAGIC_H__ */
diff --git a/include/linux/major.h b/include/linux/major.h
new file mode 100644
index 00000000..14706398
--- /dev/null
+++ b/include/linux/major.h
@@ -0,0 +1,184 @@
+#ifndef _LINUX_MAJOR_H
+#define _LINUX_MAJOR_H
+
+/*
+ * This file has definitions for major device numbers.
+ * For the device number assignments, see Documentation/devices.txt.
+ */
+
+#define UNNAMED_MAJOR		0
+#define MEM_MAJOR		1
+#define RAMDISK_MAJOR		1
+#define FLOPPY_MAJOR		2
+#define PTY_MASTER_MAJOR	2
+#define IDE0_MAJOR		3
+#define HD_MAJOR		IDE0_MAJOR
+#define PTY_SLAVE_MAJOR		3
+#define TTY_MAJOR		4
+#define TTYAUX_MAJOR		5
+#define LP_MAJOR		6
+#define VCS_MAJOR		7
+#define LOOP_MAJOR		7
+#define SCSI_DISK0_MAJOR	8
+#define SCSI_TAPE_MAJOR		9
+#define MD_MAJOR		9
+#define MISC_MAJOR		10
+#define SCSI_CDROM_MAJOR	11
+#define MUX_MAJOR		11	/* PA-RISC only */
+#define XT_DISK_MAJOR		13
+#define INPUT_MAJOR		13
+#define SOUND_MAJOR		14
+#define CDU31A_CDROM_MAJOR	15
+#define JOYSTICK_MAJOR		15
+#define GOLDSTAR_CDROM_MAJOR	16
+#define OPTICS_CDROM_MAJOR	17
+#define SANYO_CDROM_MAJOR	18
+#define CYCLADES_MAJOR		19
+#define CYCLADESAUX_MAJOR	20
+#define MITSUMI_X_CDROM_MAJOR	20
+#define MFM_ACORN_MAJOR		21	/* ARM Linux /dev/mfm */
+#define SCSI_GENERIC_MAJOR	21
+#define IDE1_MAJOR		22
+#define DIGICU_MAJOR		22
+#define DIGI_MAJOR		23
+#define MITSUMI_CDROM_MAJOR	23
+#define CDU535_CDROM_MAJOR	24
+#define STL_SERIALMAJOR		24
+#define MATSUSHITA_CDROM_MAJOR	25
+#define STL_CALLOUTMAJOR	25
+#define MATSUSHITA_CDROM2_MAJOR	26
+#define QIC117_TAPE_MAJOR	27
+#define MATSUSHITA_CDROM3_MAJOR	27
+#define MATSUSHITA_CDROM4_MAJOR	28
+#define STL_SIOMEMMAJOR		28
+#define ACSI_MAJOR		28
+#define AZTECH_CDROM_MAJOR	29
+#define FB_MAJOR		29   /* /dev/fb* framebuffers */
+#define CM206_CDROM_MAJOR	32
+#define IDE2_MAJOR		33
+#define IDE3_MAJOR		34
+#define Z8530_MAJOR		34
+#define XPRAM_MAJOR		35   /* Expanded storage on S/390: "slow ram"*/
+#define NETLINK_MAJOR		36
+#define PS2ESDI_MAJOR		36
+#define IDETAPE_MAJOR		37
+#define Z2RAM_MAJOR		37
+#define APBLOCK_MAJOR		38   /* AP1000 Block device */
+#define DDV_MAJOR		39   /* AP1000 DDV block device */
+#define NBD_MAJOR		43   /* Network block device	*/
+#define RISCOM8_NORMAL_MAJOR	48
+#define DAC960_MAJOR		48   /* 48..55 */
+#define RISCOM8_CALLOUT_MAJOR	49
+#define MKISS_MAJOR		55
+#define DSP56K_MAJOR		55   /* DSP56001 processor device */
+
+#define IDE4_MAJOR		56
+#define IDE5_MAJOR		57
+
+#define SCSI_DISK1_MAJOR	65
+#define SCSI_DISK2_MAJOR	66
+#define SCSI_DISK3_MAJOR	67
+#define SCSI_DISK4_MAJOR	68
+#define SCSI_DISK5_MAJOR	69
+#define SCSI_DISK6_MAJOR	70
+#define SCSI_DISK7_MAJOR	71
+
+#define COMPAQ_SMART2_MAJOR	72
+#define COMPAQ_SMART2_MAJOR1	73
+#define COMPAQ_SMART2_MAJOR2	74
+#define COMPAQ_SMART2_MAJOR3	75
+#define COMPAQ_SMART2_MAJOR4	76
+#define COMPAQ_SMART2_MAJOR5	77
+#define COMPAQ_SMART2_MAJOR6	78
+#define COMPAQ_SMART2_MAJOR7	79
+
+#define SPECIALIX_NORMAL_MAJOR	75
+#define SPECIALIX_CALLOUT_MAJOR	76
+
+#define AURORA_MAJOR		79
+
+#define I2O_MAJOR		80	/* 80->87 */
+
+#define SHMIQ_MAJOR		85   /* Linux/mips, SGI /dev/shmiq */
+#define SCSI_CHANGER_MAJOR      86
+
+#define IDE6_MAJOR		88
+#define IDE7_MAJOR		89
+#define IDE8_MAJOR		90
+#define IDE9_MAJOR		91
+
+#define DASD_MAJOR		94
+
+#define MDISK_MAJOR		95
+
+#define UBD_MAJOR		98
+
+#define PP_MAJOR		99
+#define JSFD_MAJOR		99
+
+#define PHONE_MAJOR		100
+
+#define COMPAQ_CISS_MAJOR	104
+#define COMPAQ_CISS_MAJOR1	105
+#define COMPAQ_CISS_MAJOR2      106
+#define COMPAQ_CISS_MAJOR3      107
+#define COMPAQ_CISS_MAJOR4      108
+#define COMPAQ_CISS_MAJOR5      109
+#define COMPAQ_CISS_MAJOR6      110
+#define COMPAQ_CISS_MAJOR7      111
+
+#define VIODASD_MAJOR		112
+#define VIOCD_MAJOR		113
+
+#define ATARAID_MAJOR		114
+
+#define SCSI_DISK8_MAJOR	128
+#define SCSI_DISK9_MAJOR	129
+#define SCSI_DISK10_MAJOR	130
+#define SCSI_DISK11_MAJOR	131
+#define SCSI_DISK12_MAJOR	132
+#define SCSI_DISK13_MAJOR	133
+#define SCSI_DISK14_MAJOR	134
+#define SCSI_DISK15_MAJOR	135
+
+#define UNIX98_PTY_MASTER_MAJOR	128
+#define UNIX98_PTY_MAJOR_COUNT	8
+#define UNIX98_PTY_SLAVE_MAJOR	(UNIX98_PTY_MASTER_MAJOR+UNIX98_PTY_MAJOR_COUNT)
+
+#define DRBD_MAJOR		147
+#define RTF_MAJOR		150
+#define RAW_MAJOR		162
+
+#define USB_ACM_MAJOR		166
+#define USB_ACM_AUX_MAJOR	167
+#define USB_CHAR_MAJOR		180
+
+#define MMC_BLOCK_MAJOR		179
+
+#define VXVM_MAJOR		199	/* VERITAS volume i/o driver    */
+#define VXSPEC_MAJOR		200	/* VERITAS volume config driver */
+#define VXDMP_MAJOR		201	/* VERITAS volume multipath driver */
+
+#define XENVBD_MAJOR		202	/* Xen virtual block device */
+
+#define MSR_MAJOR		202
+#define CPUID_MAJOR		203
+
+#define OSST_MAJOR		206	/* OnStream-SCx0 SCSI tape */
+
+#define IBM_TTY3270_MAJOR	227
+#define IBM_FS3270_MAJOR	228
+
+#define VIOTAPE_MAJOR		230
+
+#define VD_MAJOR                236   /* For all Video Decoders & Encoders */
+#define CIPHER_MAJOR            238   /* For security engine */
+
+#define VID_MAJOR               241   /* For CMOS driver */
+#define MB_MAJOR                242   /* For WMT Memory Block driver */
+
+#define BLOCK_EXT_MAJOR		259
+#define SCSI_OSD_MAJOR		260	/* open-osd's OSD scsi device */
+#define CEC_MAJOR		261	/* for WMT HDMI CEC driver*/
+
+#endif
diff --git a/include/linux/map_to_7segment.h b/include/linux/map_to_7segment.h
new file mode 100644
index 00000000..12d62a54
--- /dev/null
+++ b/include/linux/map_to_7segment.h
@@ -0,0 +1,187 @@
+/*
+ * Copyright (c) 2005 Henk Vergonet <Henk.Vergonet@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef MAP_TO_7SEGMENT_H
+#define MAP_TO_7SEGMENT_H
+
+/* This file provides translation primitives and tables for the conversion
+ * of (ASCII) characters to a 7-segments notation.
+ *
+ * The 7 segment's wikipedia notation below is used as standard.
+ * See: http://en.wikipedia.org/wiki/Seven_segment_display
+ *
+ * Notation:	+-a-+
+ *		f   b
+ *		+-g-+
+ *		e   c
+ *		+-d-+
+ *
+ * Usage:
+ *
+ *   Register a map variable, and fill it with a character set:
+ *	static SEG7_DEFAULT_MAP(map_seg7);
+ *
+ *
+ *   Then use for conversion:
+ *	seg7 = map_to_seg7(&map_seg7, some_char);
+ *	...
+ *
+ * In device drivers it is recommended, if required, to make the char map
+ * accessible via the sysfs interface using the following scheme:
+ *
+ * static ssize_t show_map(struct device *dev, char *buf) {
+ *	memcpy(buf, &map_seg7, sizeof(map_seg7));
+ *	return sizeof(map_seg7);
+ * }
+ * static ssize_t store_map(struct device *dev, const char *buf, size_t cnt) {
+ *	if(cnt != sizeof(map_seg7))
+ *		return -EINVAL;
+ *	memcpy(&map_seg7, buf, cnt);
+ *	return cnt;
+ * }
+ * static DEVICE_ATTR(map_seg7, PERMS_RW, show_map, store_map);
+ *
+ * History:
+ * 2005-05-31	RFC linux-kernel@vger.kernel.org
+ */
+#include <linux/errno.h>
+
+
+#define BIT_SEG7_A		0
+#define BIT_SEG7_B		1
+#define BIT_SEG7_C		2
+#define BIT_SEG7_D		3
+#define BIT_SEG7_E		4
+#define BIT_SEG7_F		5
+#define BIT_SEG7_G		6
+#define BIT_SEG7_RESERVED	7
+
+struct seg7_conversion_map {
+	unsigned char	table[128];
+};
+
+static __inline__ int map_to_seg7(struct seg7_conversion_map *map, int c)
+{
+	return c >= 0 && c < sizeof(map->table) ? map->table[c] : -EINVAL;
+}
+
+#define SEG7_CONVERSION_MAP(_name, _map)	\
+	struct seg7_conversion_map _name = { .table = { _map } }
+
+/*
+ * It is recommended to use a facility that allows user space to redefine
+ * custom character sets for LCD devices. Please use a sysfs interface
+ * as described above.
+ */
+#define MAP_TO_SEG7_SYSFS_FILE	"map_seg7"
+
+/*******************************************************************************
+ * ASCII conversion table
+ ******************************************************************************/
+
+#define _SEG7(l,a,b,c,d,e,f,g)	\
+      (	a<<BIT_SEG7_A |	b<<BIT_SEG7_B |	c<<BIT_SEG7_C |	d<<BIT_SEG7_D |	\
+	e<<BIT_SEG7_E |	f<<BIT_SEG7_F |	g<<BIT_SEG7_G )
+
+#define _MAP_0_32_ASCII_SEG7_NON_PRINTABLE	\
+	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
+
+#define _MAP_33_47_ASCII_SEG7_SYMBOL		\
+ _SEG7('!',0,0,0,0,1,1,0), _SEG7('"',0,1,0,0,0,1,0), _SEG7('#',0,1,1,0,1,1,0),\
+ _SEG7('$',1,0,1,1,0,1,1), _SEG7('%',0,0,1,0,0,1,0), _SEG7('&',1,0,1,1,1,1,1),\
+ _SEG7('\'',0,0,0,0,0,1,0),_SEG7('(',1,0,0,1,1,1,0), _SEG7(')',1,1,1,1,0,0,0),\
+ _SEG7('*',0,1,1,0,1,1,1), _SEG7('+',0,1,1,0,0,0,1), _SEG7(',',0,0,0,0,1,0,0),\
+ _SEG7('-',0,0,0,0,0,0,1), _SEG7('.',0,0,0,0,1,0,0), _SEG7('/',0,1,0,0,1,0,1),
+
+#define _MAP_48_57_ASCII_SEG7_NUMERIC		\
+ _SEG7('0',1,1,1,1,1,1,0), _SEG7('1',0,1,1,0,0,0,0), _SEG7('2',1,1,0,1,1,0,1),\
+ _SEG7('3',1,1,1,1,0,0,1), _SEG7('4',0,1,1,0,0,1,1), _SEG7('5',1,0,1,1,0,1,1),\
+ _SEG7('6',1,0,1,1,1,1,1), _SEG7('7',1,1,1,0,0,0,0), _SEG7('8',1,1,1,1,1,1,1),\
+ _SEG7('9',1,1,1,1,0,1,1),
+
+#define _MAP_58_64_ASCII_SEG7_SYMBOL		\
+ _SEG7(':',0,0,0,1,0,0,1), _SEG7(';',0,0,0,1,0,0,1), _SEG7('<',1,0,0,0,0,1,1),\
+ _SEG7('=',0,0,0,1,0,0,1), _SEG7('>',1,1,0,0,0,0,1), _SEG7('?',1,1,1,0,0,1,0),\
+ _SEG7('@',1,1,0,1,1,1,1),
+
+#define _MAP_65_90_ASCII_SEG7_ALPHA_UPPR	\
+ _SEG7('A',1,1,1,0,1,1,1), _SEG7('B',1,1,1,1,1,1,1), _SEG7('C',1,0,0,1,1,1,0),\
+ _SEG7('D',1,1,1,1,1,1,0), _SEG7('E',1,0,0,1,1,1,1), _SEG7('F',1,0,0,0,1,1,1),\
+ _SEG7('G',1,1,1,1,0,1,1), _SEG7('H',0,1,1,0,1,1,1), _SEG7('I',0,1,1,0,0,0,0),\
+ _SEG7('J',0,1,1,1,0,0,0), _SEG7('K',0,1,1,0,1,1,1), _SEG7('L',0,0,0,1,1,1,0),\
+ _SEG7('M',1,1,1,0,1,1,0), _SEG7('N',1,1,1,0,1,1,0), _SEG7('O',1,1,1,1,1,1,0),\
+ _SEG7('P',1,1,0,0,1,1,1), _SEG7('Q',1,1,1,1,1,1,0), _SEG7('R',1,1,1,0,1,1,1),\
+ _SEG7('S',1,0,1,1,0,1,1), _SEG7('T',0,0,0,1,1,1,1), _SEG7('U',0,1,1,1,1,1,0),\
+ _SEG7('V',0,1,1,1,1,1,0), _SEG7('W',0,1,1,1,1,1,1), _SEG7('X',0,1,1,0,1,1,1),\
+ _SEG7('Y',0,1,1,0,0,1,1), _SEG7('Z',1,1,0,1,1,0,1),
+
+#define _MAP_91_96_ASCII_SEG7_SYMBOL		\
+ _SEG7('[',1,0,0,1,1,1,0), _SEG7('\\',0,0,1,0,0,1,1),_SEG7(']',1,1,1,1,0,0,0),\
+ _SEG7('^',1,1,0,0,0,1,0), _SEG7('_',0,0,0,1,0,0,0), _SEG7('`',0,1,0,0,0,0,0),
+
+#define _MAP_97_122_ASCII_SEG7_ALPHA_LOWER	\
+ _SEG7('A',1,1,1,0,1,1,1), _SEG7('b',0,0,1,1,1,1,1), _SEG7('c',0,0,0,1,1,0,1),\
+ _SEG7('d',0,1,1,1,1,0,1), _SEG7('E',1,0,0,1,1,1,1), _SEG7('F',1,0,0,0,1,1,1),\
+ _SEG7('G',1,1,1,1,0,1,1), _SEG7('h',0,0,1,0,1,1,1), _SEG7('i',0,0,1,0,0,0,0),\
+ _SEG7('j',0,0,1,1,0,0,0), _SEG7('k',0,0,1,0,1,1,1), _SEG7('L',0,0,0,1,1,1,0),\
+ _SEG7('M',1,1,1,0,1,1,0), _SEG7('n',0,0,1,0,1,0,1), _SEG7('o',0,0,1,1,1,0,1),\
+ _SEG7('P',1,1,0,0,1,1,1), _SEG7('q',1,1,1,0,0,1,1), _SEG7('r',0,0,0,0,1,0,1),\
+ _SEG7('S',1,0,1,1,0,1,1), _SEG7('T',0,0,0,1,1,1,1), _SEG7('u',0,0,1,1,1,0,0),\
+ _SEG7('v',0,0,1,1,1,0,0), _SEG7('W',0,1,1,1,1,1,1), _SEG7('X',0,1,1,0,1,1,1),\
+ _SEG7('y',0,1,1,1,0,1,1), _SEG7('Z',1,1,0,1,1,0,1),
+
+#define _MAP_123_126_ASCII_SEG7_SYMBOL		\
+ _SEG7('{',1,0,0,1,1,1,0), _SEG7('|',0,0,0,0,1,1,0), _SEG7('}',1,1,1,1,0,0,0),\
+ _SEG7('~',1,0,0,0,0,0,0),
+
+/* Maps */
+
+/* This set tries to map as close as possible to the visible characteristics
+ * of the ASCII symbol, lowercase and uppercase letters may differ in
+ * presentation on the display.
+ */
+#define MAP_ASCII7SEG_ALPHANUM			\
+	_MAP_0_32_ASCII_SEG7_NON_PRINTABLE	\
+	_MAP_33_47_ASCII_SEG7_SYMBOL		\
+	_MAP_48_57_ASCII_SEG7_NUMERIC		\
+	_MAP_58_64_ASCII_SEG7_SYMBOL		\
+	_MAP_65_90_ASCII_SEG7_ALPHA_UPPR	\
+	_MAP_91_96_ASCII_SEG7_SYMBOL		\
+	_MAP_97_122_ASCII_SEG7_ALPHA_LOWER	\
+	_MAP_123_126_ASCII_SEG7_SYMBOL
+
+/* This set tries to map as close as possible to the symbolic characteristics
+ * of the ASCII character for maximum discrimination.
+ * For now this means all alpha chars are in lower case representations.
+ * (This for example facilitates the use of hex numbers with uppercase input.)
+ */
+#define MAP_ASCII7SEG_ALPHANUM_LC			\
+	_MAP_0_32_ASCII_SEG7_NON_PRINTABLE	\
+	_MAP_33_47_ASCII_SEG7_SYMBOL		\
+	_MAP_48_57_ASCII_SEG7_NUMERIC		\
+	_MAP_58_64_ASCII_SEG7_SYMBOL		\
+	_MAP_97_122_ASCII_SEG7_ALPHA_LOWER	\
+	_MAP_91_96_ASCII_SEG7_SYMBOL		\
+	_MAP_97_122_ASCII_SEG7_ALPHA_LOWER	\
+	_MAP_123_126_ASCII_SEG7_SYMBOL
+
+#define SEG7_DEFAULT_MAP(_name)		\
+	SEG7_CONVERSION_MAP(_name,MAP_ASCII7SEG_ALPHANUM)
+
+#endif	/* MAP_TO_7SEGMENT_H */
+
diff --git a/include/linux/maple.h b/include/linux/maple.h
new file mode 100644
index 00000000..c37288b2
--- /dev/null
+++ b/include/linux/maple.h
@@ -0,0 +1,105 @@
+#ifndef __LINUX_MAPLE_H
+#define __LINUX_MAPLE_H
+
+#include <mach/maple.h>
+
+struct device;
+extern struct bus_type maple_bus_type;
+
+/* Maple Bus command and response codes */
+enum maple_code {
+	MAPLE_RESPONSE_FILEERR =	-5,
+	MAPLE_RESPONSE_AGAIN,	/* retransmit */
+	MAPLE_RESPONSE_BADCMD,
+	MAPLE_RESPONSE_BADFUNC,
+	MAPLE_RESPONSE_NONE,	/* unit didn't respond*/
+	MAPLE_COMMAND_DEVINFO =		1,
+	MAPLE_COMMAND_ALLINFO,
+	MAPLE_COMMAND_RESET,
+	MAPLE_COMMAND_KILL,
+	MAPLE_RESPONSE_DEVINFO,
+	MAPLE_RESPONSE_ALLINFO,
+	MAPLE_RESPONSE_OK,
+	MAPLE_RESPONSE_DATATRF,
+	MAPLE_COMMAND_GETCOND,
+	MAPLE_COMMAND_GETMINFO,
+	MAPLE_COMMAND_BREAD,
+	MAPLE_COMMAND_BWRITE,
+	MAPLE_COMMAND_BSYNC,
+	MAPLE_COMMAND_SETCOND,
+	MAPLE_COMMAND_MICCONTROL
+};
+
+enum maple_file_errors {
+	MAPLE_FILEERR_INVALID_PARTITION =	0x01000000,
+	MAPLE_FILEERR_PHASE_ERROR =		0x02000000,
+	MAPLE_FILEERR_INVALID_BLOCK =		0x04000000,
+	MAPLE_FILEERR_WRITE_ERROR =		0x08000000,
+	MAPLE_FILEERR_INVALID_WRITE_LENGTH =	0x10000000,
+	MAPLE_FILEERR_BAD_CRC = 		0x20000000
+};
+
+struct maple_buffer {
+	char bufx[0x400];
+	void *buf;
+};
+
+struct mapleq {
+	struct list_head list;
+	struct maple_device *dev;
+	struct maple_buffer *recvbuf;
+	void *sendbuf, *recvbuf_p2;
+	unsigned char length;
+	enum maple_code command;
+};
+
+struct maple_devinfo {
+	unsigned long function;
+	unsigned long function_data[3];
+	unsigned char area_code;
+	unsigned char connector_direction;
+	char product_name[31];
+	char product_licence[61];
+	unsigned short standby_power;
+	unsigned short max_power;
+};
+
+struct maple_device {
+	struct maple_driver *driver;
+	struct mapleq *mq;
+	void (*callback) (struct mapleq * mq);
+	void (*fileerr_handler)(struct maple_device *mdev, void *recvbuf);
+	int (*can_unload)(struct maple_device *mdev);
+	unsigned long when, interval, function;
+	struct maple_devinfo devinfo;
+	unsigned char port, unit;
+	char product_name[32];
+	char product_licence[64];
+	atomic_t busy;
+	wait_queue_head_t maple_wait;
+	struct device dev;
+};
+
+struct maple_driver {
+	unsigned long function;
+	struct device_driver drv;
+};
+
+void maple_getcond_callback(struct maple_device *dev,
+			    void (*callback) (struct mapleq * mq),
+			    unsigned long interval,
+			    unsigned long function);
+int maple_driver_register(struct maple_driver *);
+void maple_driver_unregister(struct maple_driver *);
+
+int maple_add_packet(struct maple_device *mdev, u32 function,
+	u32 command, u32 length, void *data);
+void maple_clear_dev(struct maple_device *mdev);
+
+#define to_maple_dev(n) container_of(n, struct maple_device, dev)
+#define to_maple_driver(n) container_of(n, struct maple_driver, drv)
+
+#define maple_get_drvdata(d)		dev_get_drvdata(&(d)->dev)
+#define maple_set_drvdata(d,p)		dev_set_drvdata(&(d)->dev, (p))
+
+#endif				/* __LINUX_MAPLE_H */
diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h
new file mode 100644
index 00000000..dd3c34eb
--- /dev/null
+++ b/include/linux/marvell_phy.h
@@ -0,0 +1,22 @@
+#ifndef _MARVELL_PHY_H
+#define _MARVELL_PHY_H
+
+/* Mask used for ID comparisons */
+#define MARVELL_PHY_ID_MASK		0xfffffff0
+
+/* Known PHY IDs */
+#define MARVELL_PHY_ID_88E1101		0x01410c60
+#define MARVELL_PHY_ID_88E1112		0x01410c90
+#define MARVELL_PHY_ID_88E1111		0x01410cc0
+#define MARVELL_PHY_ID_88E1118		0x01410e10
+#define MARVELL_PHY_ID_88E1121R		0x01410cb0
+#define MARVELL_PHY_ID_88E1145		0x01410cd0
+#define MARVELL_PHY_ID_88E1149R		0x01410e50
+#define MARVELL_PHY_ID_88E1240		0x01410e30
+#define MARVELL_PHY_ID_88E1318S		0x01410e90
+
+/* struct phy_device dev_flags definitions */
+#define MARVELL_PHY_M1145_FLAGS_RESISTANCE	0x00000001
+#define MARVELL_PHY_M1118_DNS323_LEDS		0x00000002
+
+#endif /* _MARVELL_PHY_H */
diff --git a/include/linux/math64.h b/include/linux/math64.h
new file mode 100644
index 00000000..b8ba8554
--- /dev/null
+++ b/include/linux/math64.h
@@ -0,0 +1,121 @@
+#ifndef _LINUX_MATH64_H
+#define _LINUX_MATH64_H
+
+#include <linux/types.h>
+#include <asm/div64.h>
+
+#if BITS_PER_LONG == 64
+
+#define div64_long(x,y) div64_s64((x),(y))
+
+/**
+ * div_u64_rem - unsigned 64bit divide with 32bit divisor with remainder
+ *
+ * This is commonly provided by 32bit archs to provide an optimized 64bit
+ * divide.
+ */
+static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder)
+{
+	*remainder = dividend % divisor;
+	return dividend / divisor;
+}
+
+/**
+ * div_s64_rem - signed 64bit divide with 32bit divisor with remainder
+ */
+static inline s64 div_s64_rem(s64 dividend, s32 divisor, s32 *remainder)
+{
+	*remainder = dividend % divisor;
+	return dividend / divisor;
+}
+
+/**
+ * div64_u64 - unsigned 64bit divide with 64bit divisor
+ */
+static inline u64 div64_u64(u64 dividend, u64 divisor)
+{
+	return dividend / divisor;
+}
+
+/**
+ * div64_s64 - signed 64bit divide with 64bit divisor
+ */
+static inline s64 div64_s64(s64 dividend, s64 divisor)
+{
+	return dividend / divisor;
+}
+
+#elif BITS_PER_LONG == 32
+
+#define div64_long(x,y) div_s64((x),(y))
+
+#ifndef div_u64_rem
+static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder)
+{
+	*remainder = do_div(dividend, divisor);
+	return dividend;
+}
+#endif
+
+#ifndef div_s64_rem
+extern s64 div_s64_rem(s64 dividend, s32 divisor, s32 *remainder);
+#endif
+
+#ifndef div64_u64
+extern u64 div64_u64(u64 dividend, u64 divisor);
+#endif
+
+#ifndef div64_s64
+extern s64 div64_s64(s64 dividend, s64 divisor);
+#endif
+
+#endif /* BITS_PER_LONG */
+
+/**
+ * div_u64 - unsigned 64bit divide with 32bit divisor
+ *
+ * This is the most common 64bit divide and should be used if possible,
+ * as many 32bit archs can optimize this variant better than a full 64bit
+ * divide.
+ */
+#ifndef div_u64
+static inline u64 div_u64(u64 dividend, u32 divisor)
+{
+	u32 remainder;
+	return div_u64_rem(dividend, divisor, &remainder);
+}
+#endif
+
+/**
+ * div_s64 - signed 64bit divide with 32bit divisor
+ */
+#ifndef div_s64
+static inline s64 div_s64(s64 dividend, s32 divisor)
+{
+	s32 remainder;
+	return div_s64_rem(dividend, divisor, &remainder);
+}
+#endif
+
+u32 iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder);
+
+static __always_inline u32
+__iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder)
+{
+	u32 ret = 0;
+
+	while (dividend >= divisor) {
+		/* The following asm() prevents the compiler from
+		   optimising this loop into a modulo operation.  */
+		asm("" : "+rm"(dividend));
+
+		dividend -= divisor;
+		ret++;
+	}
+
+	*remainder = dividend;
+
+	return ret;
+}
+
+#endif /* _LINUX_MATH64_H */
diff --git a/include/linux/matroxfb.h b/include/linux/matroxfb.h
new file mode 100644
index 00000000..8c22a893
--- /dev/null
+++ b/include/linux/matroxfb.h
@@ -0,0 +1,42 @@
+#ifndef __LINUX_MATROXFB_H__
+#define __LINUX_MATROXFB_H__
+
+#include <asm/ioctl.h>
+#include <linux/types.h>
+#include <linux/videodev2.h>
+#include <linux/fb.h>
+
+struct matroxioc_output_mode {
+	__u32	output;		/* which output */
+#define MATROXFB_OUTPUT_PRIMARY		0x0000
+#define MATROXFB_OUTPUT_SECONDARY	0x0001
+#define MATROXFB_OUTPUT_DFP		0x0002
+	__u32	mode;		/* which mode */
+#define MATROXFB_OUTPUT_MODE_PAL	0x0001
+#define MATROXFB_OUTPUT_MODE_NTSC	0x0002
+#define MATROXFB_OUTPUT_MODE_MONITOR	0x0080
+};
+#define MATROXFB_SET_OUTPUT_MODE	_IOW('n',0xFA,size_t)
+#define MATROXFB_GET_OUTPUT_MODE	_IOWR('n',0xFA,size_t)
+
+/* bitfield */
+#define MATROXFB_OUTPUT_CONN_PRIMARY	(1 << MATROXFB_OUTPUT_PRIMARY)
+#define MATROXFB_OUTPUT_CONN_SECONDARY	(1 << MATROXFB_OUTPUT_SECONDARY)
+#define MATROXFB_OUTPUT_CONN_DFP	(1 << MATROXFB_OUTPUT_DFP)
+/* connect these outputs to this framebuffer */
+#define MATROXFB_SET_OUTPUT_CONNECTION	_IOW('n',0xF8,size_t)
+/* which outputs are connected to this framebuffer */
+#define MATROXFB_GET_OUTPUT_CONNECTION	_IOR('n',0xF8,size_t)
+/* which outputs are available for this framebuffer */
+#define MATROXFB_GET_AVAILABLE_OUTPUTS	_IOR('n',0xF9,size_t)
+/* which outputs exist on this framebuffer */
+#define MATROXFB_GET_ALL_OUTPUTS	_IOR('n',0xFB,size_t)
+
+enum matroxfb_ctrl_id {
+  MATROXFB_CID_TESTOUT	 = V4L2_CID_PRIVATE_BASE,
+  MATROXFB_CID_DEFLICKER,
+  MATROXFB_CID_LAST
+};
+
+#endif
+
diff --git a/include/linux/max17040_battery.h b/include/linux/max17040_battery.h
new file mode 100644
index 00000000..ad97b06c
--- /dev/null
+++ b/include/linux/max17040_battery.h
@@ -0,0 +1,19 @@
+/*
+ *  Copyright (C) 2009 Samsung Electronics
+ *  Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MAX17040_BATTERY_H_
+#define __MAX17040_BATTERY_H_
+
+struct max17040_platform_data {
+	int (*battery_online)(void);
+	int (*charger_online)(void);
+	int (*charger_enable)(void);
+};
+
+#endif
diff --git a/include/linux/mbcache.h b/include/linux/mbcache.h
new file mode 100644
index 00000000..5525d370
--- /dev/null
+++ b/include/linux/mbcache.h
@@ -0,0 +1,53 @@
+/*
+  File: linux/mbcache.h
+
+  (C) 2001 by Andreas Gruenbacher, <a.gruenbacher@computer.org>
+*/
+
+struct mb_cache_entry {
+	struct list_head		e_lru_list;
+	struct mb_cache			*e_cache;
+	unsigned short			e_used;
+	unsigned short			e_queued;
+	struct block_device		*e_bdev;
+	sector_t			e_block;
+	struct list_head		e_block_list;
+	struct {
+		struct list_head	o_list;
+		unsigned int		o_key;
+	} e_index;
+};
+
+struct mb_cache {
+	struct list_head		c_cache_list;
+	const char			*c_name;
+	atomic_t			c_entry_count;
+	int				c_max_entries;
+	int				c_bucket_bits;
+	struct kmem_cache		*c_entry_cache;
+	struct list_head		*c_block_hash;
+	struct list_head		*c_index_hash;
+};
+
+/* Functions on caches */
+
+struct mb_cache *mb_cache_create(const char *, int);
+void mb_cache_shrink(struct block_device *);
+void mb_cache_destroy(struct mb_cache *);
+
+/* Functions on cache entries */
+
+struct mb_cache_entry *mb_cache_entry_alloc(struct mb_cache *, gfp_t);
+int mb_cache_entry_insert(struct mb_cache_entry *, struct block_device *,
+			  sector_t, unsigned int);
+void mb_cache_entry_release(struct mb_cache_entry *);
+void mb_cache_entry_free(struct mb_cache_entry *);
+struct mb_cache_entry *mb_cache_entry_get(struct mb_cache *,
+					  struct block_device *,
+					  sector_t);
+struct mb_cache_entry *mb_cache_entry_find_first(struct mb_cache *cache,
+						 struct block_device *, 
+						 unsigned int);
+struct mb_cache_entry *mb_cache_entry_find_next(struct mb_cache_entry *,
+						struct block_device *, 
+						unsigned int);
diff --git a/include/linux/mbus.h b/include/linux/mbus.h
new file mode 100644
index 00000000..efa1a6d7
--- /dev/null
+++ b/include/linux/mbus.h
@@ -0,0 +1,47 @@
+/*
+ * Marvell MBUS common definitions.
+ *
+ * Copyright (C) 2008 Marvell Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __LINUX_MBUS_H
+#define __LINUX_MBUS_H
+
+struct mbus_dram_target_info
+{
+	/*
+	 * The 4-bit MBUS target ID of the DRAM controller.
+	 */
+	u8		mbus_dram_target_id;
+
+	/*
+	 * The base address, size, and MBUS attribute ID for each
+	 * of the possible DRAM chip selects.  Peripherals are
+	 * required to support at least 4 decode windows.
+	 */
+	int		num_cs;
+	struct mbus_dram_window {
+		u8	cs_index;
+		u8	mbus_attr;
+		u32	base;
+		u32	size;
+	} cs[4];
+};
+
+/*
+ * The Marvell mbus is to be found only on SOCs from the Orion family
+ * at the moment.  Provide a dummy stub for other architectures.
+ */
+#ifdef CONFIG_PLAT_ORION
+extern const struct mbus_dram_target_info *mv_mbus_dram_info(void);
+#else
+static inline const struct mbus_dram_target_info *mv_mbus_dram_info(void)
+{
+	return NULL;
+}
+#endif
+#endif
diff --git a/include/linux/mc146818rtc.h b/include/linux/mc146818rtc.h
new file mode 100644
index 00000000..2f4e957a
--- /dev/null
+++ b/include/linux/mc146818rtc.h
@@ -0,0 +1,119 @@
+/* mc146818rtc.h - register definitions for the Real-Time-Clock / CMOS RAM
+ * Copyright Torsten Duwe <duwe@informatik.uni-erlangen.de> 1993
+ * derived from Data Sheet, Copyright Motorola 1984 (!).
+ * It was written to be part of the Linux operating system.
+ */
+/* permission is hereby granted to copy, modify and redistribute this code
+ * in terms of the GNU Library General Public License, Version 2 or later,
+ * at your option.
+ */
+
+#ifndef _MC146818RTC_H
+#define _MC146818RTC_H
+
+#include <asm/io.h>
+#include <linux/rtc.h>			/* get the user-level API */
+#include <asm/mc146818rtc.h>		/* register access macros */
+
+#ifdef __KERNEL__
+#include <linux/spinlock.h>		/* spinlock_t */
+extern spinlock_t rtc_lock;		/* serialize CMOS RAM access */
+
+/* Some RTCs extend the mc146818 register set to support alarms of more
+ * than 24 hours in the future; or dates that include a century code.
+ * This platform_data structure can pass this information to the driver.
+ *
+ * Also, some platforms need suspend()/resume() hooks to kick in special
+ * handling of wake alarms, e.g. activating ACPI BIOS hooks or setting up
+ * a separate wakeup alarm used by some almost-clone chips.
+ */
+struct cmos_rtc_board_info {
+	void	(*wake_on)(struct device *dev);
+	void	(*wake_off)(struct device *dev);
+
+	u8	rtc_day_alarm;		/* zero, or register index */
+	u8	rtc_mon_alarm;		/* zero, or register index */
+	u8	rtc_century;		/* zero, or register index */
+};
+#endif
+
+/**********************************************************************
+ * register summary
+ **********************************************************************/
+#define RTC_SECONDS		0
+#define RTC_SECONDS_ALARM	1
+#define RTC_MINUTES		2
+#define RTC_MINUTES_ALARM	3
+#define RTC_HOURS		4
+#define RTC_HOURS_ALARM		5
+/* RTC_*_alarm is always true if 2 MSBs are set */
+# define RTC_ALARM_DONT_CARE 	0xC0
+
+#define RTC_DAY_OF_WEEK		6
+#define RTC_DAY_OF_MONTH	7
+#define RTC_MONTH		8
+#define RTC_YEAR		9
+
+/* control registers - Moto names
+ */
+#define RTC_REG_A		10
+#define RTC_REG_B		11
+#define RTC_REG_C		12
+#define RTC_REG_D		13
+
+/**********************************************************************
+ * register details
+ **********************************************************************/
+#define RTC_FREQ_SELECT	RTC_REG_A
+
+/* update-in-progress  - set to "1" 244 microsecs before RTC goes off the bus,
+ * reset after update (may take 1.984ms @ 32768Hz RefClock) is complete,
+ * totalling to a max high interval of 2.228 ms.
+ */
+# define RTC_UIP		0x80
+# define RTC_DIV_CTL		0x70
+   /* divider control: refclock values 4.194 / 1.049 MHz / 32.768 kHz */
+#  define RTC_REF_CLCK_4MHZ	0x00
+#  define RTC_REF_CLCK_1MHZ	0x10
+#  define RTC_REF_CLCK_32KHZ	0x20
+   /* 2 values for divider stage reset, others for "testing purposes only" */
+#  define RTC_DIV_RESET1	0x60
+#  define RTC_DIV_RESET2	0x70
+  /* Periodic intr. / Square wave rate select. 0=none, 1=32.8kHz,... 15=2Hz */
+# define RTC_RATE_SELECT 	0x0F
+
+/**********************************************************************/
+#define RTC_CONTROL	RTC_REG_B
+# define RTC_SET 0x80		/* disable updates for clock setting */
+# define RTC_PIE 0x40		/* periodic interrupt enable */
+# define RTC_AIE 0x20		/* alarm interrupt enable */
+# define RTC_UIE 0x10		/* update-finished interrupt enable */
+# define RTC_SQWE 0x08		/* enable square-wave output */
+# define RTC_DM_BINARY 0x04	/* all time/date values are BCD if clear */
+# define RTC_24H 0x02		/* 24 hour mode - else hours bit 7 means pm */
+# define RTC_DST_EN 0x01	/* auto switch DST - works f. USA only */
+
+/**********************************************************************/
+#define RTC_INTR_FLAGS	RTC_REG_C
+/* caution - cleared by read */
+# define RTC_IRQF 0x80		/* any of the following 3 is active */
+# define RTC_PF 0x40
+# define RTC_AF 0x20
+# define RTC_UF 0x10
+
+/**********************************************************************/
+#define RTC_VALID	RTC_REG_D
+# define RTC_VRT 0x80		/* valid RAM and time */
+/**********************************************************************/
+
+#ifndef ARCH_RTC_LOCATION	/* Override by <asm/mc146818rtc.h>? */
+
+#define RTC_IO_EXTENT	0x8
+#define RTC_IO_EXTENT_USED	0x2
+#define RTC_IOMAPPED	1	/* Default to I/O mapping. */
+
+#else
+#define RTC_IO_EXTENT_USED      RTC_IO_EXTENT
+#endif /* ARCH_RTC_LOCATION */
+
+#endif /* _MC146818RTC_H */
diff --git a/include/linux/mc6821.h b/include/linux/mc6821.h
new file mode 100644
index 00000000..28e301e2
--- /dev/null
+++ b/include/linux/mc6821.h
@@ -0,0 +1,51 @@
+#ifndef _MC6821_H_
+#define _MC6821_H_
+
+/*
+ * This file describes the memery mapping of the MC6821 PIA.
+ * The unions describe overlayed registers. Which of them is used is
+ * determined by bit 2 of the corresponding control register.
+ * this files expects the PIA_REG_PADWIDTH to be defined the numeric
+ * value of the register spacing.
+ *
+ * Data came from MFC-31-Developer Kit (from Ralph Seidel,
+ * zodiac@darkness.gun.de) and Motorola Data Sheet (from 
+ * Richard Hirst, srh@gpt.co.uk)
+ *
+ * 6.11.95 copyright Joerg Dorchain (dorchain@mpi-sb.mpg.de)
+ *
+ */
+
+#ifndef PIA_REG_PADWIDTH
+#define PIA_REG_PADWIDTH 255
+#endif
+
+struct pia {
+	union {
+		volatile u_char pra;
+		volatile u_char ddra;
+	} ua;
+	u_char pad1[PIA_REG_PADWIDTH];
+	volatile u_char cra;
+	u_char pad2[PIA_REG_PADWIDTH];
+	union {
+		volatile u_char prb;
+		volatile u_char ddrb;
+	} ub;
+	u_char pad3[PIA_REG_PADWIDTH];
+	volatile u_char crb;
+	u_char pad4[PIA_REG_PADWIDTH];
+};
+
+#define ppra ua.pra
+#define pddra ua.ddra
+#define pprb ub.prb
+#define pddrb ub.ddrb
+
+#define PIA_C1_ENABLE_IRQ (1<<0)
+#define PIA_C1_LOW_TO_HIGH (1<<1)
+#define PIA_DDR (1<<2)
+#define PIA_IRQ2 (1<<6)
+#define PIA_IRQ1 (1<<7)
+
+#endif
diff --git a/include/linux/mca-legacy.h b/include/linux/mca-legacy.h
new file mode 100644
index 00000000..7a3aea84
--- /dev/null
+++ b/include/linux/mca-legacy.h
@@ -0,0 +1,66 @@
+/* -*- mode: c; c-basic-offset: 8 -*- */
+
+/* This is the function prototypes for the old legacy MCA interface
+ *
+ * Please move your driver to the new sysfs based one instead */
+
+#ifndef _LINUX_MCA_LEGACY_H
+#define _LINUX_MCA_LEGACY_H
+
+#include <linux/mca.h>
+
+#warning "MCA legacy - please move your driver to the new sysfs api"
+
+/* MCA_NOTFOUND is an error condition.  The other two indicate
+ * motherboard POS registers contain the adapter.  They might be
+ * returned by the mca_find_adapter() function, and can be used as
+ * arguments to mca_read_stored_pos().  I'm not going to allow direct
+ * access to the motherboard registers until we run across an adapter
+ * that requires it.  We don't know enough about them to know if it's
+ * safe.
+ *
+ * See Documentation/mca.txt or one of the existing drivers for
+ * more information.
+ */
+#define MCA_NOTFOUND	(-1)
+
+
+
+/* Returns the slot of the first enabled adapter matching id.  User can
+ * specify a starting slot beyond zero, to deal with detecting multiple
+ * devices.  Returns MCA_NOTFOUND if id not found.  Also checks the
+ * integrated adapters.
+ */
+extern int mca_find_adapter(int id, int start);
+extern int mca_find_unused_adapter(int id, int start);
+
+extern int mca_mark_as_used(int slot);
+extern void mca_mark_as_unused(int slot);
+
+/* gets a byte out of POS register (stored in memory) */
+extern unsigned char mca_read_stored_pos(int slot, int reg);
+
+/* This can be expanded later.  Right now, it gives us a way of
+ * getting meaningful information into the MCA_info structure,
+ * so we can have a more interesting /proc/mca.
+ */
+extern void mca_set_adapter_name(int slot, char* name);
+
+/* These routines actually mess with the hardware POS registers.  They
+ * temporarily disable the device (and interrupts), so make sure you know
+ * what you're doing if you use them.  Furthermore, writing to a POS may
+ * result in two devices trying to share a resource, which in turn can
+ * result in multiple devices sharing memory spaces, IRQs, or even trashing
+ * hardware.  YOU HAVE BEEN WARNED.
+ *
+ * You can only access slots with this.  Motherboard registers are off
+ * limits.
+ */
+
+/* read a byte from the specified POS register. */
+extern unsigned char mca_read_pos(int slot, int reg);
+
+/* write a byte to the specified POS register. */
+extern void mca_write_pos(int slot, int reg, unsigned char byte);
+
+#endif
diff --git a/include/linux/mca.h b/include/linux/mca.h
new file mode 100644
index 00000000..37972704
--- /dev/null
+++ b/include/linux/mca.h
@@ -0,0 +1,148 @@
+/*
+ * Header for Microchannel Architecture Bus
+ * Written by Martin Kolinek, February 1996
+ */
+
+#ifndef _LINUX_MCA_H
+#define _LINUX_MCA_H
+
+#include <linux/device.h>
+
+#ifdef CONFIG_MCA
+#include <asm/mca.h>
+
+extern int MCA_bus;
+#else
+#define MCA_bus 0
+#endif
+
+/* This sets up an information callback for /proc/mca/slot?.  The
+ * function is called with the buffer, slot, and device pointer (or
+ * some equally informative context information, or nothing, if you
+ * prefer), and is expected to put useful information into the
+ * buffer.  The adapter name, id, and POS registers get printed
+ * before this is called though, so don't do it again.
+ *
+ * This should be called with a NULL procfn when a module
+ * unregisters, thus preventing kernel crashes and other such
+ * nastiness.
+ */
+typedef int (*MCA_ProcFn)(char* buf, int slot, void* dev);
+
+/* Should only be called by the NMI interrupt handler, this will do some
+ * fancy stuff to figure out what might have generated a NMI.
+ */
+extern void mca_handle_nmi(void);
+
+enum MCA_AdapterStatus {
+	MCA_ADAPTER_NORMAL = 0,
+	MCA_ADAPTER_NONE = 1,
+	MCA_ADAPTER_DISABLED = 2,
+	MCA_ADAPTER_ERROR = 3
+};
+
+struct mca_device {
+	u64			dma_mask;
+	int			pos_id;
+	int			slot;
+
+	/* index into id_table, set by the bus match routine */
+	int			index;
+
+	/* is there a driver installed? 0 - No, 1 - Yes */
+	int			driver_loaded;
+	/* POS registers */
+	unsigned char		pos[8];
+	/* if a pseudo adapter of the motherboard, this is the motherboard
+	 * register value to use for setup cycles */
+	short			pos_register;
+	
+	enum MCA_AdapterStatus	status;
+#ifdef CONFIG_MCA_PROC_FS
+	/* name of the proc/mca file */
+	char			procname[8];
+	/* /proc info callback */
+	MCA_ProcFn		procfn;
+	/* device/context info for proc callback */
+	void			*proc_dev;
+#endif
+	struct device		dev;
+	char			name[32];
+};
+#define to_mca_device(mdev) container_of(mdev, struct mca_device, dev)
+
+struct mca_bus_accessor_functions {
+	unsigned char	(*mca_read_pos)(struct mca_device *, int reg);
+	void		(*mca_write_pos)(struct mca_device *, int reg,
+					 unsigned char byte);
+	int		(*mca_transform_irq)(struct mca_device *, int irq);
+	int		(*mca_transform_ioport)(struct mca_device *,
+						  int region);
+	void *		(*mca_transform_memory)(struct mca_device *,
+						void *memory);
+};
+
+struct mca_bus {
+	u64			default_dma_mask;
+	int			number;
+	struct mca_bus_accessor_functions f;
+	struct device		dev;
+	char			name[32];
+};
+#define to_mca_bus(mdev) container_of(mdev, struct mca_bus, dev)
+
+struct mca_driver {
+	const short		*id_table;
+	void			*driver_data;
+	int			integrated_id;
+	struct device_driver	driver;
+};
+#define to_mca_driver(mdriver) container_of(mdriver, struct mca_driver, driver)
+
+/* Ongoing supported API functions */
+extern struct mca_device *mca_find_device_by_slot(int slot);
+extern int mca_system_init(void);
+extern struct mca_bus *mca_attach_bus(int);
+
+extern unsigned char mca_device_read_stored_pos(struct mca_device *mca_dev,
+						int reg);
+extern unsigned char mca_device_read_pos(struct mca_device *mca_dev, int reg);
+extern void mca_device_write_pos(struct mca_device *mca_dev, int reg,
+				 unsigned char byte);
+extern int mca_device_transform_irq(struct mca_device *mca_dev, int irq);
+extern int mca_device_transform_ioport(struct mca_device *mca_dev, int port);
+extern void *mca_device_transform_memory(struct mca_device *mca_dev,
+					 void *mem);
+extern int mca_device_claimed(struct mca_device *mca_dev);
+extern void mca_device_set_claim(struct mca_device *mca_dev, int val);
+extern void mca_device_set_name(struct mca_device *mca_dev, const char *name);
+static inline char *mca_device_get_name(struct mca_device *mca_dev)
+{
+	return mca_dev ? mca_dev->name : NULL;
+}
+
+extern enum MCA_AdapterStatus mca_device_status(struct mca_device *mca_dev);
+
+extern struct bus_type mca_bus_type;
+
+extern int mca_register_driver(struct mca_driver *drv);
+extern int mca_register_driver_integrated(struct mca_driver *, int);
+extern void mca_unregister_driver(struct mca_driver *drv);
+
+/* WARNING: only called by the boot time device setup */
+extern int mca_register_device(int bus, struct mca_device *mca_dev);
+
+#ifdef CONFIG_MCA_PROC_FS
+extern void mca_do_proc_init(void);
+extern void mca_set_adapter_procfn(int slot, MCA_ProcFn, void* dev);
+#else
+static inline void mca_do_proc_init(void)
+{
+}
+
+static inline void mca_set_adapter_procfn(int slot, MCA_ProcFn fn, void* dev)
+{
+}
+#endif
+
+#endif /* _LINUX_MCA_H */
diff --git a/include/linux/mdio-bitbang.h b/include/linux/mdio-bitbang.h
new file mode 100644
index 00000000..76f52bbb
--- /dev/null
+++ b/include/linux/mdio-bitbang.h
@@ -0,0 +1,45 @@
+#ifndef __LINUX_MDIO_BITBANG_H
+#define __LINUX_MDIO_BITBANG_H
+
+#include <linux/phy.h>
+
+struct module;
+
+struct mdiobb_ctrl;
+
+struct mdiobb_ops {
+	struct module *owner;
+
+	/* Set the Management Data Clock high if level is one,
+	 * low if level is zero.
+	 */
+	void (*set_mdc)(struct mdiobb_ctrl *ctrl, int level);
+
+	/* Configure the Management Data I/O pin as an input if
+	 * "output" is zero, or an output if "output" is one.
+	 */
+	void (*set_mdio_dir)(struct mdiobb_ctrl *ctrl, int output);
+
+	/* Set the Management Data I/O pin high if value is one,
+	 * low if "value" is zero.  This may only be called
+	 * when the MDIO pin is configured as an output.
+	 */
+	void (*set_mdio_data)(struct mdiobb_ctrl *ctrl, int value);
+
+	/* Retrieve the state Management Data I/O pin. */
+	int (*get_mdio_data)(struct mdiobb_ctrl *ctrl);
+};
+
+struct mdiobb_ctrl {
+	const struct mdiobb_ops *ops;
+	/* reset callback */
+	int (*reset)(struct mii_bus *bus);
+};
+
+/* The returned bus is not yet registered with the phy layer. */
+struct mii_bus *alloc_mdio_bitbang(struct mdiobb_ctrl *ctrl);
+
+/* The bus must already have been unregistered. */
+void free_mdio_bitbang(struct mii_bus *bus);
+
+#endif
diff --git a/include/linux/mdio-gpio.h b/include/linux/mdio-gpio.h
new file mode 100644
index 00000000..7c9fe3c2
--- /dev/null
+++ b/include/linux/mdio-gpio.h
@@ -0,0 +1,27 @@
+/*
+ * MDIO-GPIO bus platform data structures
+ *
+ * Copyright (C) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __LINUX_MDIO_GPIO_H
+#define __LINUX_MDIO_GPIO_H
+
+#include <linux/mdio-bitbang.h>
+
+struct mdio_gpio_platform_data {
+	/* GPIO numbers for bus pins */
+	unsigned int mdc;
+	unsigned int mdio;
+
+	unsigned int phy_mask;
+	int irqs[PHY_MAX_ADDR];
+	/* reset callback */
+	int (*reset)(struct mii_bus *bus);
+};
+
+#endif /* __LINUX_MDIO_GPIO_H */
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
new file mode 100644
index 00000000..dfb94795
--- /dev/null
+++ b/include/linux/mdio.h
@@ -0,0 +1,361 @@
+/*
+ * linux/mdio.h: definitions for MDIO (clause 45) transceivers
+ * Copyright 2006-2009 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef __LINUX_MDIO_H__
+#define __LINUX_MDIO_H__
+
+#include <linux/types.h>
+#include <linux/mii.h>
+
+/* MDIO Manageable Devices (MMDs). */
+#define MDIO_MMD_PMAPMD		1	/* Physical Medium Attachment/
+					 * Physical Medium Dependent */
+#define MDIO_MMD_WIS		2	/* WAN Interface Sublayer */
+#define MDIO_MMD_PCS		3	/* Physical Coding Sublayer */
+#define MDIO_MMD_PHYXS		4	/* PHY Extender Sublayer */
+#define MDIO_MMD_DTEXS		5	/* DTE Extender Sublayer */
+#define MDIO_MMD_TC		6	/* Transmission Convergence */
+#define MDIO_MMD_AN		7	/* Auto-Negotiation */
+#define MDIO_MMD_C22EXT		29	/* Clause 22 extension */
+#define MDIO_MMD_VEND1		30	/* Vendor specific 1 */
+#define MDIO_MMD_VEND2		31	/* Vendor specific 2 */
+
+/* Generic MDIO registers. */
+#define MDIO_CTRL1		MII_BMCR
+#define MDIO_STAT1		MII_BMSR
+#define MDIO_DEVID1		MII_PHYSID1
+#define MDIO_DEVID2		MII_PHYSID2
+#define MDIO_SPEED		4	/* Speed ability */
+#define MDIO_DEVS1		5	/* Devices in package */
+#define MDIO_DEVS2		6
+#define MDIO_CTRL2		7	/* 10G control 2 */
+#define MDIO_STAT2		8	/* 10G status 2 */
+#define MDIO_PMA_TXDIS		9	/* 10G PMA/PMD transmit disable */
+#define MDIO_PMA_RXDET		10	/* 10G PMA/PMD receive signal detect */
+#define MDIO_PMA_EXTABLE	11	/* 10G PMA/PMD extended ability */
+#define MDIO_PKGID1		14	/* Package identifier */
+#define MDIO_PKGID2		15
+#define MDIO_AN_ADVERTISE	16	/* AN advertising (base page) */
+#define MDIO_AN_LPA		19	/* AN LP abilities (base page) */
+#define MDIO_PHYXS_LNSTAT	24	/* PHY XGXS lane state */
+
+/* Media-dependent registers. */
+#define MDIO_PMA_10GBT_SWAPPOL	130	/* 10GBASE-T pair swap & polarity */
+#define MDIO_PMA_10GBT_TXPWR	131	/* 10GBASE-T TX power control */
+#define MDIO_PMA_10GBT_SNR	133	/* 10GBASE-T SNR margin, lane A.
+					 * Lanes B-D are numbered 134-136. */
+#define MDIO_PMA_10GBR_FECABLE	170	/* 10GBASE-R FEC ability */
+#define MDIO_PCS_10GBX_STAT1	24	/* 10GBASE-X PCS status 1 */
+#define MDIO_PCS_10GBRT_STAT1	32	/* 10GBASE-R/-T PCS status 1 */
+#define MDIO_PCS_10GBRT_STAT2	33	/* 10GBASE-R/-T PCS status 2 */
+#define MDIO_AN_10GBT_CTRL	32	/* 10GBASE-T auto-negotiation control */
+#define MDIO_AN_10GBT_STAT	33	/* 10GBASE-T auto-negotiation status */
+#define MDIO_AN_EEE_ADV		60	/* EEE advertisement */
+
+/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
+#define MDIO_PMA_LASI_RXCTRL	0x9000	/* RX_ALARM control */
+#define MDIO_PMA_LASI_TXCTRL	0x9001	/* TX_ALARM control */
+#define MDIO_PMA_LASI_CTRL	0x9002	/* LASI control */
+#define MDIO_PMA_LASI_RXSTAT	0x9003	/* RX_ALARM status */
+#define MDIO_PMA_LASI_TXSTAT	0x9004	/* TX_ALARM status */
+#define MDIO_PMA_LASI_STAT	0x9005	/* LASI status */
+
+/* Control register 1. */
+/* Enable extended speed selection */
+#define MDIO_CTRL1_SPEEDSELEXT		(BMCR_SPEED1000 | BMCR_SPEED100)
+/* All speed selection bits */
+#define MDIO_CTRL1_SPEEDSEL		(MDIO_CTRL1_SPEEDSELEXT | 0x003c)
+#define MDIO_CTRL1_FULLDPLX		BMCR_FULLDPLX
+#define MDIO_CTRL1_LPOWER		BMCR_PDOWN
+#define MDIO_CTRL1_RESET		BMCR_RESET
+#define MDIO_PMA_CTRL1_LOOPBACK		0x0001
+#define MDIO_PMA_CTRL1_SPEED1000	BMCR_SPEED1000
+#define MDIO_PMA_CTRL1_SPEED100		BMCR_SPEED100
+#define MDIO_PCS_CTRL1_LOOPBACK		BMCR_LOOPBACK
+#define MDIO_PHYXS_CTRL1_LOOPBACK	BMCR_LOOPBACK
+#define MDIO_AN_CTRL1_RESTART		BMCR_ANRESTART
+#define MDIO_AN_CTRL1_ENABLE		BMCR_ANENABLE
+#define MDIO_AN_CTRL1_XNP		0x2000	/* Enable extended next page */
+
+/* 10 Gb/s */
+#define MDIO_CTRL1_SPEED10G		(MDIO_CTRL1_SPEEDSELEXT | 0x00)
+/* 10PASS-TS/2BASE-TL */
+#define MDIO_CTRL1_SPEED10P2B		(MDIO_CTRL1_SPEEDSELEXT | 0x04)
+
+/* Status register 1. */
+#define MDIO_STAT1_LPOWERABLE		0x0002	/* Low-power ability */
+#define MDIO_STAT1_LSTATUS		BMSR_LSTATUS
+#define MDIO_STAT1_FAULT		0x0080	/* Fault */
+#define MDIO_AN_STAT1_LPABLE		0x0001	/* Link partner AN ability */
+#define MDIO_AN_STAT1_ABLE		BMSR_ANEGCAPABLE
+#define MDIO_AN_STAT1_RFAULT		BMSR_RFAULT
+#define MDIO_AN_STAT1_COMPLETE		BMSR_ANEGCOMPLETE
+#define MDIO_AN_STAT1_PAGE		0x0040	/* Page received */
+#define MDIO_AN_STAT1_XNP		0x0080	/* Extended next page status */
+
+/* Speed register. */
+#define MDIO_SPEED_10G			0x0001	/* 10G capable */
+#define MDIO_PMA_SPEED_2B		0x0002	/* 2BASE-TL capable */
+#define MDIO_PMA_SPEED_10P		0x0004	/* 10PASS-TS capable */
+#define MDIO_PMA_SPEED_1000		0x0010	/* 1000M capable */
+#define MDIO_PMA_SPEED_100		0x0020	/* 100M capable */
+#define MDIO_PMA_SPEED_10		0x0040	/* 10M capable */
+#define MDIO_PCS_SPEED_10P2B		0x0002	/* 10PASS-TS/2BASE-TL capable */
+
+/* Device present registers. */
+#define MDIO_DEVS_PRESENT(devad)	(1 << (devad))
+#define MDIO_DEVS_PMAPMD		MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD)
+#define MDIO_DEVS_WIS			MDIO_DEVS_PRESENT(MDIO_MMD_WIS)
+#define MDIO_DEVS_PCS			MDIO_DEVS_PRESENT(MDIO_MMD_PCS)
+#define MDIO_DEVS_PHYXS			MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS)
+#define MDIO_DEVS_DTEXS			MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS)
+#define MDIO_DEVS_TC			MDIO_DEVS_PRESENT(MDIO_MMD_TC)
+#define MDIO_DEVS_AN			MDIO_DEVS_PRESENT(MDIO_MMD_AN)
+#define MDIO_DEVS_C22EXT		MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT)
+
+/* Control register 2. */
+#define MDIO_PMA_CTRL2_TYPE		0x000f	/* PMA/PMD type selection */
+#define MDIO_PMA_CTRL2_10GBCX4		0x0000	/* 10GBASE-CX4 type */
+#define MDIO_PMA_CTRL2_10GBEW		0x0001	/* 10GBASE-EW type */
+#define MDIO_PMA_CTRL2_10GBLW		0x0002	/* 10GBASE-LW type */
+#define MDIO_PMA_CTRL2_10GBSW		0x0003	/* 10GBASE-SW type */
+#define MDIO_PMA_CTRL2_10GBLX4		0x0004	/* 10GBASE-LX4 type */
+#define MDIO_PMA_CTRL2_10GBER		0x0005	/* 10GBASE-ER type */
+#define MDIO_PMA_CTRL2_10GBLR		0x0006	/* 10GBASE-LR type */
+#define MDIO_PMA_CTRL2_10GBSR		0x0007	/* 10GBASE-SR type */
+#define MDIO_PMA_CTRL2_10GBLRM		0x0008	/* 10GBASE-LRM type */
+#define MDIO_PMA_CTRL2_10GBT		0x0009	/* 10GBASE-T type */
+#define MDIO_PMA_CTRL2_10GBKX4		0x000a	/* 10GBASE-KX4 type */
+#define MDIO_PMA_CTRL2_10GBKR		0x000b	/* 10GBASE-KR type */
+#define MDIO_PMA_CTRL2_1000BT		0x000c	/* 1000BASE-T type */
+#define MDIO_PMA_CTRL2_1000BKX		0x000d	/* 1000BASE-KX type */
+#define MDIO_PMA_CTRL2_100BTX		0x000e	/* 100BASE-TX type */
+#define MDIO_PMA_CTRL2_10BT		0x000f	/* 10BASE-T type */
+#define MDIO_PCS_CTRL2_TYPE		0x0003	/* PCS type selection */
+#define MDIO_PCS_CTRL2_10GBR		0x0000	/* 10GBASE-R type */
+#define MDIO_PCS_CTRL2_10GBX		0x0001	/* 10GBASE-X type */
+#define MDIO_PCS_CTRL2_10GBW		0x0002	/* 10GBASE-W type */
+#define MDIO_PCS_CTRL2_10GBT		0x0003	/* 10GBASE-T type */
+
+/* Status register 2. */
+#define MDIO_STAT2_RXFAULT		0x0400	/* Receive fault */
+#define MDIO_STAT2_TXFAULT		0x0800	/* Transmit fault */
+#define MDIO_STAT2_DEVPRST		0xc000	/* Device present */
+#define MDIO_STAT2_DEVPRST_VAL		0x8000	/* Device present value */
+#define MDIO_PMA_STAT2_LBABLE		0x0001	/* PMA loopback ability */
+#define MDIO_PMA_STAT2_10GBEW		0x0002	/* 10GBASE-EW ability */
+#define MDIO_PMA_STAT2_10GBLW		0x0004	/* 10GBASE-LW ability */
+#define MDIO_PMA_STAT2_10GBSW		0x0008	/* 10GBASE-SW ability */
+#define MDIO_PMA_STAT2_10GBLX4		0x0010	/* 10GBASE-LX4 ability */
+#define MDIO_PMA_STAT2_10GBER		0x0020	/* 10GBASE-ER ability */
+#define MDIO_PMA_STAT2_10GBLR		0x0040	/* 10GBASE-LR ability */
+#define MDIO_PMA_STAT2_10GBSR		0x0080	/* 10GBASE-SR ability */
+#define MDIO_PMD_STAT2_TXDISAB		0x0100	/* PMD TX disable ability */
+#define MDIO_PMA_STAT2_EXTABLE		0x0200	/* Extended abilities */
+#define MDIO_PMA_STAT2_RXFLTABLE	0x1000	/* Receive fault ability */
+#define MDIO_PMA_STAT2_TXFLTABLE	0x2000	/* Transmit fault ability */
+#define MDIO_PCS_STAT2_10GBR		0x0001	/* 10GBASE-R capable */
+#define MDIO_PCS_STAT2_10GBX		0x0002	/* 10GBASE-X capable */
+#define MDIO_PCS_STAT2_10GBW		0x0004	/* 10GBASE-W capable */
+#define MDIO_PCS_STAT2_RXFLTABLE	0x1000	/* Receive fault ability */
+#define MDIO_PCS_STAT2_TXFLTABLE	0x2000	/* Transmit fault ability */
+
+/* Transmit disable register. */
+#define MDIO_PMD_TXDIS_GLOBAL		0x0001	/* Global PMD TX disable */
+#define MDIO_PMD_TXDIS_0		0x0002	/* PMD TX disable 0 */
+#define MDIO_PMD_TXDIS_1		0x0004	/* PMD TX disable 1 */
+#define MDIO_PMD_TXDIS_2		0x0008	/* PMD TX disable 2 */
+#define MDIO_PMD_TXDIS_3		0x0010	/* PMD TX disable 3 */
+
+/* Receive signal detect register. */
+#define MDIO_PMD_RXDET_GLOBAL		0x0001	/* Global PMD RX signal detect */
+#define MDIO_PMD_RXDET_0		0x0002	/* PMD RX signal detect 0 */
+#define MDIO_PMD_RXDET_1		0x0004	/* PMD RX signal detect 1 */
+#define MDIO_PMD_RXDET_2		0x0008	/* PMD RX signal detect 2 */
+#define MDIO_PMD_RXDET_3		0x0010	/* PMD RX signal detect 3 */
+
+/* Extended abilities register. */
+#define MDIO_PMA_EXTABLE_10GCX4		0x0001	/* 10GBASE-CX4 ability */
+#define MDIO_PMA_EXTABLE_10GBLRM	0x0002	/* 10GBASE-LRM ability */
+#define MDIO_PMA_EXTABLE_10GBT		0x0004	/* 10GBASE-T ability */
+#define MDIO_PMA_EXTABLE_10GBKX4	0x0008	/* 10GBASE-KX4 ability */
+#define MDIO_PMA_EXTABLE_10GBKR		0x0010	/* 10GBASE-KR ability */
+#define MDIO_PMA_EXTABLE_1000BT		0x0020	/* 1000BASE-T ability */
+#define MDIO_PMA_EXTABLE_1000BKX	0x0040	/* 1000BASE-KX ability */
+#define MDIO_PMA_EXTABLE_100BTX		0x0080	/* 100BASE-TX ability */
+#define MDIO_PMA_EXTABLE_10BT		0x0100	/* 10BASE-T ability */
+
+/* PHY XGXS lane state register. */
+#define MDIO_PHYXS_LNSTAT_SYNC0		0x0001
+#define MDIO_PHYXS_LNSTAT_SYNC1		0x0002
+#define MDIO_PHYXS_LNSTAT_SYNC2		0x0004
+#define MDIO_PHYXS_LNSTAT_SYNC3		0x0008
+#define MDIO_PHYXS_LNSTAT_ALIGN		0x1000
+
+/* PMA 10GBASE-T pair swap & polarity */
+#define MDIO_PMA_10GBT_SWAPPOL_ABNX	0x0001	/* Pair A/B uncrossed */
+#define MDIO_PMA_10GBT_SWAPPOL_CDNX	0x0002	/* Pair C/D uncrossed */
+#define MDIO_PMA_10GBT_SWAPPOL_AREV	0x0100	/* Pair A polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_BREV	0x0200	/* Pair B polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_CREV	0x0400	/* Pair C polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_DREV	0x0800	/* Pair D polarity reversed */
+
+/* PMA 10GBASE-T TX power register. */
+#define MDIO_PMA_10GBT_TXPWR_SHORT	0x0001	/* Short-reach mode */
+
+/* PMA 10GBASE-T SNR registers. */
+/* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */
+#define MDIO_PMA_10GBT_SNR_BIAS		0x8000
+#define MDIO_PMA_10GBT_SNR_MAX		127
+
+/* PMA 10GBASE-R FEC ability register. */
+#define MDIO_PMA_10GBR_FECABLE_ABLE	0x0001	/* FEC ability */
+#define MDIO_PMA_10GBR_FECABLE_ERRABLE	0x0002	/* FEC error indic. ability */
+
+/* PCS 10GBASE-R/-T status register 1. */
+#define MDIO_PCS_10GBRT_STAT1_BLKLK	0x0001	/* Block lock attained */
+
+/* PCS 10GBASE-R/-T status register 2. */
+#define MDIO_PCS_10GBRT_STAT2_ERR	0x00ff
+#define MDIO_PCS_10GBRT_STAT2_BER	0x3f00
+
+/* AN 10GBASE-T control register. */
+#define MDIO_AN_10GBT_CTRL_ADV10G	0x1000	/* Advertise 10GBASE-T */
+
+/* AN 10GBASE-T status register. */
+#define MDIO_AN_10GBT_STAT_LPTRR	0x0200	/* LP training reset req. */
+#define MDIO_AN_10GBT_STAT_LPLTABLE	0x0400	/* LP loop timing ability */
+#define MDIO_AN_10GBT_STAT_LP10G	0x0800	/* LP is 10GBT capable */
+#define MDIO_AN_10GBT_STAT_REMOK	0x1000	/* Remote OK */
+#define MDIO_AN_10GBT_STAT_LOCOK	0x2000	/* Local OK */
+#define MDIO_AN_10GBT_STAT_MS		0x4000	/* Master/slave config */
+#define MDIO_AN_10GBT_STAT_MSFLT	0x8000	/* Master/slave config fault */
+
+/* AN EEE Advertisement register. */
+#define MDIO_AN_EEE_ADV_100TX		0x0002	/* Advertise 100TX EEE cap */
+#define MDIO_AN_EEE_ADV_1000T		0x0004	/* Advertise 1000T EEE cap */
+
+/* LASI RX_ALARM control/status registers. */
+#define MDIO_PMA_LASI_RX_PHYXSLFLT	0x0001	/* PHY XS RX local fault */
+#define MDIO_PMA_LASI_RX_PCSLFLT	0x0008	/* PCS RX local fault */
+#define MDIO_PMA_LASI_RX_PMALFLT	0x0010	/* PMA/PMD RX local fault */
+#define MDIO_PMA_LASI_RX_OPTICPOWERFLT	0x0020	/* RX optical power fault */
+#define MDIO_PMA_LASI_RX_WISLFLT	0x0200	/* WIS local fault */
+
+/* LASI TX_ALARM control/status registers. */
+#define MDIO_PMA_LASI_TX_PHYXSLFLT	0x0001	/* PHY XS TX local fault */
+#define MDIO_PMA_LASI_TX_PCSLFLT	0x0008	/* PCS TX local fault */
+#define MDIO_PMA_LASI_TX_PMALFLT	0x0010	/* PMA/PMD TX local fault */
+#define MDIO_PMA_LASI_TX_LASERPOWERFLT	0x0080	/* Laser output power fault */
+#define MDIO_PMA_LASI_TX_LASERTEMPFLT	0x0100	/* Laser temperature fault */
+#define MDIO_PMA_LASI_TX_LASERBICURRFLT	0x0200	/* Laser bias current fault */
+
+/* LASI control/status registers. */
+#define MDIO_PMA_LASI_LSALARM		0x0001	/* LS_ALARM enable/status */
+#define MDIO_PMA_LASI_TXALARM		0x0002	/* TX_ALARM enable/status */
+#define MDIO_PMA_LASI_RXALARM		0x0004	/* RX_ALARM enable/status */
+
+/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */
+
+#define MDIO_PHY_ID_C45			0x8000
+#define MDIO_PHY_ID_PRTAD		0x03e0
+#define MDIO_PHY_ID_DEVAD		0x001f
+#define MDIO_PHY_ID_C45_MASK						\
+	(MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD)
+
+static inline __u16 mdio_phy_id_c45(int prtad, int devad)
+{
+	return MDIO_PHY_ID_C45 | (prtad << 5) | devad;
+}
+
+#ifdef __KERNEL__
+
+static inline bool mdio_phy_id_is_c45(int phy_id)
+{
+	return (phy_id & MDIO_PHY_ID_C45) && !(phy_id & ~MDIO_PHY_ID_C45_MASK);
+}
+
+static inline __u16 mdio_phy_id_prtad(int phy_id)
+{
+	return (phy_id & MDIO_PHY_ID_PRTAD) >> 5;
+}
+
+static inline __u16 mdio_phy_id_devad(int phy_id)
+{
+	return phy_id & MDIO_PHY_ID_DEVAD;
+}
+
+/**
+ * struct mdio_if_info - Ethernet controller MDIO interface
+ * @prtad: PRTAD of the PHY (%MDIO_PRTAD_NONE if not present/unknown)
+ * @mmds: Mask of MMDs expected to be present in the PHY.  This must be
+ *	non-zero unless @prtad = %MDIO_PRTAD_NONE.
+ * @mode_support: MDIO modes supported.  If %MDIO_SUPPORTS_C22 is set then
+ *	MII register access will be passed through with @devad =
+ *	%MDIO_DEVAD_NONE.  If %MDIO_EMULATE_C22 is set then access to
+ *	commonly used clause 22 registers will be translated into
+ *	clause 45 registers.
+ * @dev: Net device structure
+ * @mdio_read: Register read function; returns value or negative error code
+ * @mdio_write: Register write function; returns 0 or negative error code
+ */
+struct mdio_if_info {
+	int prtad;
+	u32 mmds;
+	unsigned mode_support;
+
+	struct net_device *dev;
+	int (*mdio_read)(struct net_device *dev, int prtad, int devad,
+			 u16 addr);
+	int (*mdio_write)(struct net_device *dev, int prtad, int devad,
+			  u16 addr, u16 val);
+};
+
+#define MDIO_PRTAD_NONE			(-1)
+#define MDIO_DEVAD_NONE			(-1)
+#define MDIO_SUPPORTS_C22		1
+#define MDIO_SUPPORTS_C45		2
+#define MDIO_EMULATE_C22		4
+
+struct ethtool_cmd;
+struct ethtool_pauseparam;
+extern int mdio45_probe(struct mdio_if_info *mdio, int prtad);
+extern int mdio_set_flag(const struct mdio_if_info *mdio,
+			 int prtad, int devad, u16 addr, int mask,
+			 bool sense);
+extern int mdio45_links_ok(const struct mdio_if_info *mdio, u32 mmds);
+extern int mdio45_nway_restart(const struct mdio_if_info *mdio);
+extern void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio,
+				      struct ethtool_cmd *ecmd,
+				      u32 npage_adv, u32 npage_lpa);
+extern void
+mdio45_ethtool_spauseparam_an(const struct mdio_if_info *mdio,
+			      const struct ethtool_pauseparam *ecmd);
+
+/**
+ * mdio45_ethtool_gset - get settings for ETHTOOL_GSET
+ * @mdio: MDIO interface
+ * @ecmd: Ethtool request structure
+ *
+ * Since the CSRs for auto-negotiation using next pages are not fully
+ * standardised, this function does not attempt to decode them.  Use
+ * mdio45_ethtool_gset_npage() to specify advertisement bits from next
+ * pages.
+ */
+static inline void mdio45_ethtool_gset(const struct mdio_if_info *mdio,
+				       struct ethtool_cmd *ecmd)
+{
+	mdio45_ethtool_gset_npage(mdio, ecmd, 0, 0);
+}
+
+extern int mdio_mii_ioctl(const struct mdio_if_info *mdio,
+			  struct mii_ioctl_data *mii_data, int cmd);
+
+#endif /* __KERNEL__ */
+#endif /* __LINUX_MDIO_H__ */
diff --git a/include/linux/media.h b/include/linux/media.h
new file mode 100644
index 00000000..0ef88332
--- /dev/null
+++ b/include/linux/media.h
@@ -0,0 +1,132 @@
+/*
+ * Multimedia device API
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_MEDIA_H
+#define __LINUX_MEDIA_H
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+#include <linux/version.h>
+
+#define MEDIA_API_VERSION	KERNEL_VERSION(0, 1, 0)
+
+struct media_device_info {
+	char driver[16];
+	char model[32];
+	char serial[40];
+	char bus_info[32];
+	__u32 media_version;
+	__u32 hw_revision;
+	__u32 driver_version;
+	__u32 reserved[31];
+};
+
+#define MEDIA_ENT_ID_FLAG_NEXT		(1 << 31)
+
+#define MEDIA_ENT_TYPE_SHIFT		16
+#define MEDIA_ENT_TYPE_MASK		0x00ff0000
+#define MEDIA_ENT_SUBTYPE_MASK		0x0000ffff
+
+#define MEDIA_ENT_T_DEVNODE		(1 << MEDIA_ENT_TYPE_SHIFT)
+#define MEDIA_ENT_T_DEVNODE_V4L		(MEDIA_ENT_T_DEVNODE + 1)
+#define MEDIA_ENT_T_DEVNODE_FB		(MEDIA_ENT_T_DEVNODE + 2)
+#define MEDIA_ENT_T_DEVNODE_ALSA	(MEDIA_ENT_T_DEVNODE + 3)
+#define MEDIA_ENT_T_DEVNODE_DVB		(MEDIA_ENT_T_DEVNODE + 4)
+
+#define MEDIA_ENT_T_V4L2_SUBDEV		(2 << MEDIA_ENT_TYPE_SHIFT)
+#define MEDIA_ENT_T_V4L2_SUBDEV_SENSOR	(MEDIA_ENT_T_V4L2_SUBDEV + 1)
+#define MEDIA_ENT_T_V4L2_SUBDEV_FLASH	(MEDIA_ENT_T_V4L2_SUBDEV + 2)
+#define MEDIA_ENT_T_V4L2_SUBDEV_LENS	(MEDIA_ENT_T_V4L2_SUBDEV + 3)
+
+#define MEDIA_ENT_FL_DEFAULT		(1 << 0)
+
+struct media_entity_desc {
+	__u32 id;
+	char name[32];
+	__u32 type;
+	__u32 revision;
+	__u32 flags;
+	__u32 group_id;
+	__u16 pads;
+	__u16 links;
+
+	__u32 reserved[4];
+
+	union {
+		/* Node specifications */
+		struct {
+			__u32 major;
+			__u32 minor;
+		} v4l;
+		struct {
+			__u32 major;
+			__u32 minor;
+		} fb;
+		struct {
+			__u32 card;
+			__u32 device;
+			__u32 subdevice;
+		} alsa;
+		int dvb;
+
+		/* Sub-device specifications */
+		/* Nothing needed yet */
+		__u8 raw[184];
+	};
+};
+
+#define MEDIA_PAD_FL_SINK		(1 << 0)
+#define MEDIA_PAD_FL_SOURCE		(1 << 1)
+
+struct media_pad_desc {
+	__u32 entity;		/* entity ID */
+	__u16 index;		/* pad index */
+	__u32 flags;		/* pad flags */
+	__u32 reserved[2];
+};
+
+#define MEDIA_LNK_FL_ENABLED		(1 << 0)
+#define MEDIA_LNK_FL_IMMUTABLE		(1 << 1)
+#define MEDIA_LNK_FL_DYNAMIC		(1 << 2)
+
+struct media_link_desc {
+	struct media_pad_desc source;
+	struct media_pad_desc sink;
+	__u32 flags;
+	__u32 reserved[2];
+};
+
+struct media_links_enum {
+	__u32 entity;
+	/* Should have enough room for pads elements */
+	struct media_pad_desc __user *pads;
+	/* Should have enough room for links elements */
+	struct media_link_desc __user *links;
+	__u32 reserved[4];
+};
+
+#define MEDIA_IOC_DEVICE_INFO		_IOWR('|', 0x00, struct media_device_info)
+#define MEDIA_IOC_ENUM_ENTITIES		_IOWR('|', 0x01, struct media_entity_desc)
+#define MEDIA_IOC_ENUM_LINKS		_IOWR('|', 0x02, struct media_links_enum)
+#define MEDIA_IOC_SETUP_LINK		_IOWR('|', 0x03, struct media_link_desc)
+
+#endif /* __LINUX_MEDIA_H */
diff --git a/include/linux/memblock.h b/include/linux/memblock.h
new file mode 100644
index 00000000..19dc455b
--- /dev/null
+++ b/include/linux/memblock.h
@@ -0,0 +1,251 @@
+#ifndef _LINUX_MEMBLOCK_H
+#define _LINUX_MEMBLOCK_H
+#ifdef __KERNEL__
+
+#ifdef CONFIG_HAVE_MEMBLOCK
+/*
+ * Logical memory blocks.
+ *
+ * Copyright (C) 2001 Peter Bergner, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+
+#define INIT_MEMBLOCK_REGIONS	128
+
+struct memblock_region {
+	phys_addr_t base;
+	phys_addr_t size;
+#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
+	int nid;
+#endif
+};
+
+struct memblock_type {
+	unsigned long cnt;	/* number of regions */
+	unsigned long max;	/* size of the allocated array */
+	phys_addr_t total_size;	/* size of all regions */
+	struct memblock_region *regions;
+};
+
+struct memblock {
+	phys_addr_t current_limit;
+	struct memblock_type memory;
+	struct memblock_type reserved;
+};
+
+extern struct memblock memblock;
+extern int memblock_debug;
+
+#define memblock_dbg(fmt, ...) \
+	if (memblock_debug) printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
+
+phys_addr_t memblock_find_in_range_node(phys_addr_t start, phys_addr_t end,
+				phys_addr_t size, phys_addr_t align, int nid);
+phys_addr_t memblock_find_in_range(phys_addr_t start, phys_addr_t end,
+				   phys_addr_t size, phys_addr_t align);
+phys_addr_t get_allocated_memblock_reserved_regions_info(phys_addr_t *addr);
+void memblock_allow_resize(void);
+int memblock_add_node(phys_addr_t base, phys_addr_t size, int nid);
+int memblock_add(phys_addr_t base, phys_addr_t size);
+int memblock_remove(phys_addr_t base, phys_addr_t size);
+int memblock_free(phys_addr_t base, phys_addr_t size);
+int memblock_reserve(phys_addr_t base, phys_addr_t size);
+
+#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
+void __next_mem_pfn_range(int *idx, int nid, unsigned long *out_start_pfn,
+			  unsigned long *out_end_pfn, int *out_nid);
+
+/**
+ * for_each_mem_pfn_range - early memory pfn range iterator
+ * @i: an integer used as loop variable
+ * @nid: node selector, %MAX_NUMNODES for all nodes
+ * @p_start: ptr to ulong for start pfn of the range, can be %NULL
+ * @p_end: ptr to ulong for end pfn of the range, can be %NULL
+ * @p_nid: ptr to int for nid of the range, can be %NULL
+ *
+ * Walks over configured memory ranges.  Available after early_node_map is
+ * populated.
+ */
+#define for_each_mem_pfn_range(i, nid, p_start, p_end, p_nid)		\
+	for (i = -1, __next_mem_pfn_range(&i, nid, p_start, p_end, p_nid); \
+	     i >= 0; __next_mem_pfn_range(&i, nid, p_start, p_end, p_nid))
+#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
+
+void __next_free_mem_range(u64 *idx, int nid, phys_addr_t *out_start,
+			   phys_addr_t *out_end, int *out_nid);
+
+/**
+ * for_each_free_mem_range - iterate through free memblock areas
+ * @i: u64 used as loop variable
+ * @nid: node selector, %MAX_NUMNODES for all nodes
+ * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL
+ * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL
+ * @p_nid: ptr to int for nid of the range, can be %NULL
+ *
+ * Walks over free (memory && !reserved) areas of memblock.  Available as
+ * soon as memblock is initialized.
+ */
+#define for_each_free_mem_range(i, nid, p_start, p_end, p_nid)		\
+	for (i = 0,							\
+	     __next_free_mem_range(&i, nid, p_start, p_end, p_nid);	\
+	     i != (u64)ULLONG_MAX;					\
+	     __next_free_mem_range(&i, nid, p_start, p_end, p_nid))
+
+void __next_free_mem_range_rev(u64 *idx, int nid, phys_addr_t *out_start,
+			       phys_addr_t *out_end, int *out_nid);
+
+/**
+ * for_each_free_mem_range_reverse - rev-iterate through free memblock areas
+ * @i: u64 used as loop variable
+ * @nid: node selector, %MAX_NUMNODES for all nodes
+ * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL
+ * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL
+ * @p_nid: ptr to int for nid of the range, can be %NULL
+ *
+ * Walks over free (memory && !reserved) areas of memblock in reverse
+ * order.  Available as soon as memblock is initialized.
+ */
+#define for_each_free_mem_range_reverse(i, nid, p_start, p_end, p_nid)	\
+	for (i = (u64)ULLONG_MAX,					\
+	     __next_free_mem_range_rev(&i, nid, p_start, p_end, p_nid);	\
+	     i != (u64)ULLONG_MAX;					\
+	     __next_free_mem_range_rev(&i, nid, p_start, p_end, p_nid))
+
+#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
+int memblock_set_node(phys_addr_t base, phys_addr_t size, int nid);
+
+static inline void memblock_set_region_node(struct memblock_region *r, int nid)
+{
+	r->nid = nid;
+}
+
+static inline int memblock_get_region_node(const struct memblock_region *r)
+{
+	return r->nid;
+}
+#else
+static inline void memblock_set_region_node(struct memblock_region *r, int nid)
+{
+}
+
+static inline int memblock_get_region_node(const struct memblock_region *r)
+{
+	return 0;
+}
+#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
+
+phys_addr_t memblock_alloc_nid(phys_addr_t size, phys_addr_t align, int nid);
+phys_addr_t memblock_alloc_try_nid(phys_addr_t size, phys_addr_t align, int nid);
+
+phys_addr_t memblock_alloc(phys_addr_t size, phys_addr_t align);
+
+/* Flags for memblock_alloc_base() amd __memblock_alloc_base() */
+#define MEMBLOCK_ALLOC_ANYWHERE	(~(phys_addr_t)0)
+#define MEMBLOCK_ALLOC_ACCESSIBLE	0
+
+phys_addr_t memblock_alloc_base(phys_addr_t size, phys_addr_t align,
+				phys_addr_t max_addr);
+phys_addr_t __memblock_alloc_base(phys_addr_t size, phys_addr_t align,
+				  phys_addr_t max_addr);
+phys_addr_t memblock_phys_mem_size(void);
+phys_addr_t memblock_start_of_DRAM(void);
+phys_addr_t memblock_end_of_DRAM(void);
+void memblock_enforce_memory_limit(phys_addr_t memory_limit);
+int memblock_is_memory(phys_addr_t addr);
+int memblock_is_region_memory(phys_addr_t base, phys_addr_t size);
+int memblock_is_reserved(phys_addr_t addr);
+int memblock_is_region_reserved(phys_addr_t base, phys_addr_t size);
+
+extern void __memblock_dump_all(void);
+
+static inline void memblock_dump_all(void)
+{
+	if (memblock_debug)
+		__memblock_dump_all();
+}
+
+/**
+ * memblock_set_current_limit - Set the current allocation limit to allow
+ *                         limiting allocations to what is currently
+ *                         accessible during boot
+ * @limit: New limit value (physical address)
+ */
+void memblock_set_current_limit(phys_addr_t limit);
+
+
+/*
+ * pfn conversion functions
+ *
+ * While the memory MEMBLOCKs should always be page aligned, the reserved
+ * MEMBLOCKs may not be. This accessor attempt to provide a very clear
+ * idea of what they return for such non aligned MEMBLOCKs.
+ */
+
+/**
+ * memblock_region_memory_base_pfn - Return the lowest pfn intersecting with the memory region
+ * @reg: memblock_region structure
+ */
+static inline unsigned long memblock_region_memory_base_pfn(const struct memblock_region *reg)
+{
+	return PFN_UP(reg->base);
+}
+
+/**
+ * memblock_region_memory_end_pfn - Return the end_pfn this region
+ * @reg: memblock_region structure
+ */
+static inline unsigned long memblock_region_memory_end_pfn(const struct memblock_region *reg)
+{
+	return PFN_DOWN(reg->base + reg->size);
+}
+
+/**
+ * memblock_region_reserved_base_pfn - Return the lowest pfn intersecting with the reserved region
+ * @reg: memblock_region structure
+ */
+static inline unsigned long memblock_region_reserved_base_pfn(const struct memblock_region *reg)
+{
+	return PFN_DOWN(reg->base);
+}
+
+/**
+ * memblock_region_reserved_end_pfn - Return the end_pfn this region
+ * @reg: memblock_region structure
+ */
+static inline unsigned long memblock_region_reserved_end_pfn(const struct memblock_region *reg)
+{
+	return PFN_UP(reg->base + reg->size);
+}
+
+#define for_each_memblock(memblock_type, region)					\
+	for (region = memblock.memblock_type.regions;				\
+	     region < (memblock.memblock_type.regions + memblock.memblock_type.cnt);	\
+	     region++)
+
+
+#ifdef CONFIG_ARCH_DISCARD_MEMBLOCK
+#define __init_memblock __meminit
+#define __initdata_memblock __meminitdata
+#else
+#define __init_memblock
+#define __initdata_memblock
+#endif
+
+#else
+static inline phys_addr_t memblock_alloc(phys_addr_t size, phys_addr_t align)
+{
+	return 0;
+}
+
+#endif /* CONFIG_HAVE_MEMBLOCK */
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_MEMBLOCK_H */
diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
new file mode 100644
index 00000000..f94efd2f
--- /dev/null
+++ b/include/linux/memcontrol.h
@@ -0,0 +1,452 @@
+/* memcontrol.h - Memory Controller
+ *
+ * Copyright IBM Corporation, 2007
+ * Author Balbir Singh <balbir@linux.vnet.ibm.com>
+ *
+ * Copyright 2007 OpenVZ SWsoft Inc
+ * Author: Pavel Emelianov <xemul@openvz.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _LINUX_MEMCONTROL_H
+#define _LINUX_MEMCONTROL_H
+#include <linux/cgroup.h>
+#include <linux/vm_event_item.h>
+
+struct mem_cgroup;
+struct page_cgroup;
+struct page;
+struct mm_struct;
+
+/* Stats that can be updated by kernel. */
+enum mem_cgroup_page_stat_item {
+	MEMCG_NR_FILE_MAPPED, /* # of pages charged as file rss */
+};
+
+struct mem_cgroup_reclaim_cookie {
+	struct zone *zone;
+	int priority;
+	unsigned int generation;
+};
+
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
+/*
+ * All "charge" functions with gfp_mask should use GFP_KERNEL or
+ * (gfp_mask & GFP_RECLAIM_MASK). In current implementatin, memcg doesn't
+ * alloc memory but reclaims memory from all available zones. So, "where I want
+ * memory from" bits of gfp_mask has no meaning. So any bits of that field is
+ * available but adding a rule is better. charge functions' gfp_mask should
+ * be set to GFP_KERNEL or gfp_mask & GFP_RECLAIM_MASK for avoiding ambiguous
+ * codes.
+ * (Of course, if memcg does memory allocation in future, GFP_KERNEL is sane.)
+ */
+
+extern int mem_cgroup_newpage_charge(struct page *page, struct mm_struct *mm,
+				gfp_t gfp_mask);
+/* for swap handling */
+extern int mem_cgroup_try_charge_swapin(struct mm_struct *mm,
+		struct page *page, gfp_t mask, struct mem_cgroup **memcgp);
+extern void mem_cgroup_commit_charge_swapin(struct page *page,
+					struct mem_cgroup *memcg);
+extern void mem_cgroup_cancel_charge_swapin(struct mem_cgroup *memcg);
+
+extern int mem_cgroup_cache_charge(struct page *page, struct mm_struct *mm,
+					gfp_t gfp_mask);
+
+struct lruvec *mem_cgroup_zone_lruvec(struct zone *, struct mem_cgroup *);
+struct lruvec *mem_cgroup_lru_add_list(struct zone *, struct page *,
+				       enum lru_list);
+void mem_cgroup_lru_del_list(struct page *, enum lru_list);
+void mem_cgroup_lru_del(struct page *);
+struct lruvec *mem_cgroup_lru_move_lists(struct zone *, struct page *,
+					 enum lru_list, enum lru_list);
+
+/* For coalescing uncharge for reducing memcg' overhead*/
+extern void mem_cgroup_uncharge_start(void);
+extern void mem_cgroup_uncharge_end(void);
+
+extern void mem_cgroup_uncharge_page(struct page *page);
+extern void mem_cgroup_uncharge_cache_page(struct page *page);
+
+extern void mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask,
+				     int order);
+int task_in_mem_cgroup(struct task_struct *task, const struct mem_cgroup *memcg);
+
+extern struct mem_cgroup *try_get_mem_cgroup_from_page(struct page *page);
+extern struct mem_cgroup *mem_cgroup_from_task(struct task_struct *p);
+extern struct mem_cgroup *try_get_mem_cgroup_from_mm(struct mm_struct *mm);
+
+extern struct mem_cgroup *parent_mem_cgroup(struct mem_cgroup *memcg);
+extern struct mem_cgroup *mem_cgroup_from_cont(struct cgroup *cont);
+
+static inline
+int mm_match_cgroup(const struct mm_struct *mm, const struct mem_cgroup *cgroup)
+{
+	struct mem_cgroup *memcg;
+	rcu_read_lock();
+	memcg = mem_cgroup_from_task(rcu_dereference((mm)->owner));
+	rcu_read_unlock();
+	return cgroup == memcg;
+}
+
+extern struct cgroup_subsys_state *mem_cgroup_css(struct mem_cgroup *memcg);
+
+extern int
+mem_cgroup_prepare_migration(struct page *page,
+	struct page *newpage, struct mem_cgroup **memcgp, gfp_t gfp_mask);
+extern void mem_cgroup_end_migration(struct mem_cgroup *memcg,
+	struct page *oldpage, struct page *newpage, bool migration_ok);
+
+struct mem_cgroup *mem_cgroup_iter(struct mem_cgroup *,
+				   struct mem_cgroup *,
+				   struct mem_cgroup_reclaim_cookie *);
+void mem_cgroup_iter_break(struct mem_cgroup *, struct mem_cgroup *);
+
+/*
+ * For memory reclaim.
+ */
+int mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg,
+				    struct zone *zone);
+int mem_cgroup_inactive_file_is_low(struct mem_cgroup *memcg,
+				    struct zone *zone);
+int mem_cgroup_select_victim_node(struct mem_cgroup *memcg);
+unsigned long mem_cgroup_zone_nr_lru_pages(struct mem_cgroup *memcg,
+					int nid, int zid, unsigned int lrumask);
+struct zone_reclaim_stat *mem_cgroup_get_reclaim_stat(struct mem_cgroup *memcg,
+						      struct zone *zone);
+struct zone_reclaim_stat*
+mem_cgroup_get_reclaim_stat_from_page(struct page *page);
+extern void mem_cgroup_print_oom_info(struct mem_cgroup *memcg,
+					struct task_struct *p);
+extern void mem_cgroup_replace_page_cache(struct page *oldpage,
+					struct page *newpage);
+
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
+extern int do_swap_account;
+#endif
+
+static inline bool mem_cgroup_disabled(void)
+{
+	if (mem_cgroup_subsys.disabled)
+		return true;
+	return false;
+}
+
+void __mem_cgroup_begin_update_page_stat(struct page *page, bool *locked,
+					 unsigned long *flags);
+
+extern atomic_t memcg_moving;
+
+static inline void mem_cgroup_begin_update_page_stat(struct page *page,
+					bool *locked, unsigned long *flags)
+{
+	if (mem_cgroup_disabled())
+		return;
+	rcu_read_lock();
+	*locked = false;
+	if (atomic_read(&memcg_moving))
+		__mem_cgroup_begin_update_page_stat(page, locked, flags);
+}
+
+void __mem_cgroup_end_update_page_stat(struct page *page,
+				unsigned long *flags);
+static inline void mem_cgroup_end_update_page_stat(struct page *page,
+					bool *locked, unsigned long *flags)
+{
+	if (mem_cgroup_disabled())
+		return;
+	if (*locked)
+		__mem_cgroup_end_update_page_stat(page, flags);
+	rcu_read_unlock();
+}
+
+void mem_cgroup_update_page_stat(struct page *page,
+				 enum mem_cgroup_page_stat_item idx,
+				 int val);
+
+static inline void mem_cgroup_inc_page_stat(struct page *page,
+					    enum mem_cgroup_page_stat_item idx)
+{
+	mem_cgroup_update_page_stat(page, idx, 1);
+}
+
+static inline void mem_cgroup_dec_page_stat(struct page *page,
+					    enum mem_cgroup_page_stat_item idx)
+{
+	mem_cgroup_update_page_stat(page, idx, -1);
+}
+
+unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order,
+						gfp_t gfp_mask,
+						unsigned long *total_scanned);
+u64 mem_cgroup_get_limit(struct mem_cgroup *memcg);
+
+void mem_cgroup_count_vm_event(struct mm_struct *mm, enum vm_event_item idx);
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+void mem_cgroup_split_huge_fixup(struct page *head);
+#endif
+
+#ifdef CONFIG_DEBUG_VM
+bool mem_cgroup_bad_page_check(struct page *page);
+void mem_cgroup_print_bad_page(struct page *page);
+#endif
+#else /* CONFIG_CGROUP_MEM_RES_CTLR */
+struct mem_cgroup;
+
+static inline int mem_cgroup_newpage_charge(struct page *page,
+					struct mm_struct *mm, gfp_t gfp_mask)
+{
+	return 0;
+}
+
+static inline int mem_cgroup_cache_charge(struct page *page,
+					struct mm_struct *mm, gfp_t gfp_mask)
+{
+	return 0;
+}
+
+static inline int mem_cgroup_try_charge_swapin(struct mm_struct *mm,
+		struct page *page, gfp_t gfp_mask, struct mem_cgroup **memcgp)
+{
+	return 0;
+}
+
+static inline void mem_cgroup_commit_charge_swapin(struct page *page,
+					  struct mem_cgroup *memcg)
+{
+}
+
+static inline void mem_cgroup_cancel_charge_swapin(struct mem_cgroup *memcg)
+{
+}
+
+static inline void mem_cgroup_uncharge_start(void)
+{
+}
+
+static inline void mem_cgroup_uncharge_end(void)
+{
+}
+
+static inline void mem_cgroup_uncharge_page(struct page *page)
+{
+}
+
+static inline void mem_cgroup_uncharge_cache_page(struct page *page)
+{
+}
+
+static inline struct lruvec *mem_cgroup_zone_lruvec(struct zone *zone,
+						    struct mem_cgroup *memcg)
+{
+	return &zone->lruvec;
+}
+
+static inline struct lruvec *mem_cgroup_lru_add_list(struct zone *zone,
+						     struct page *page,
+						     enum lru_list lru)
+{
+	return &zone->lruvec;
+}
+
+static inline void mem_cgroup_lru_del_list(struct page *page, enum lru_list lru)
+{
+}
+
+static inline void mem_cgroup_lru_del(struct page *page)
+{
+}
+
+static inline struct lruvec *mem_cgroup_lru_move_lists(struct zone *zone,
+						       struct page *page,
+						       enum lru_list from,
+						       enum lru_list to)
+{
+	return &zone->lruvec;
+}
+
+static inline struct mem_cgroup *try_get_mem_cgroup_from_page(struct page *page)
+{
+	return NULL;
+}
+
+static inline struct mem_cgroup *try_get_mem_cgroup_from_mm(struct mm_struct *mm)
+{
+	return NULL;
+}
+
+static inline int mm_match_cgroup(struct mm_struct *mm,
+		struct mem_cgroup *memcg)
+{
+	return 1;
+}
+
+static inline int task_in_mem_cgroup(struct task_struct *task,
+				     const struct mem_cgroup *memcg)
+{
+	return 1;
+}
+
+static inline struct cgroup_subsys_state
+		*mem_cgroup_css(struct mem_cgroup *memcg)
+{
+	return NULL;
+}
+
+static inline int
+mem_cgroup_prepare_migration(struct page *page, struct page *newpage,
+	struct mem_cgroup **memcgp, gfp_t gfp_mask)
+{
+	return 0;
+}
+
+static inline void mem_cgroup_end_migration(struct mem_cgroup *memcg,
+		struct page *oldpage, struct page *newpage, bool migration_ok)
+{
+}
+
+static inline struct mem_cgroup *
+mem_cgroup_iter(struct mem_cgroup *root,
+		struct mem_cgroup *prev,
+		struct mem_cgroup_reclaim_cookie *reclaim)
+{
+	return NULL;
+}
+
+static inline void mem_cgroup_iter_break(struct mem_cgroup *root,
+					 struct mem_cgroup *prev)
+{
+}
+
+static inline bool mem_cgroup_disabled(void)
+{
+	return true;
+}
+
+static inline int
+mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg, struct zone *zone)
+{
+	return 1;
+}
+
+static inline int
+mem_cgroup_inactive_file_is_low(struct mem_cgroup *memcg, struct zone *zone)
+{
+	return 1;
+}
+
+static inline unsigned long
+mem_cgroup_zone_nr_lru_pages(struct mem_cgroup *memcg, int nid, int zid,
+				unsigned int lru_mask)
+{
+	return 0;
+}
+
+
+static inline struct zone_reclaim_stat*
+mem_cgroup_get_reclaim_stat(struct mem_cgroup *memcg, struct zone *zone)
+{
+	return NULL;
+}
+
+static inline struct zone_reclaim_stat*
+mem_cgroup_get_reclaim_stat_from_page(struct page *page)
+{
+	return NULL;
+}
+
+static inline void
+mem_cgroup_print_oom_info(struct mem_cgroup *memcg, struct task_struct *p)
+{
+}
+
+static inline void mem_cgroup_begin_update_page_stat(struct page *page,
+					bool *locked, unsigned long *flags)
+{
+}
+
+static inline void mem_cgroup_end_update_page_stat(struct page *page,
+					bool *locked, unsigned long *flags)
+{
+}
+
+static inline void mem_cgroup_inc_page_stat(struct page *page,
+					    enum mem_cgroup_page_stat_item idx)
+{
+}
+
+static inline void mem_cgroup_dec_page_stat(struct page *page,
+					    enum mem_cgroup_page_stat_item idx)
+{
+}
+
+static inline
+unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order,
+					    gfp_t gfp_mask,
+					    unsigned long *total_scanned)
+{
+	return 0;
+}
+
+static inline
+u64 mem_cgroup_get_limit(struct mem_cgroup *memcg)
+{
+	return 0;
+}
+
+static inline void mem_cgroup_split_huge_fixup(struct page *head)
+{
+}
+
+static inline
+void mem_cgroup_count_vm_event(struct mm_struct *mm, enum vm_event_item idx)
+{
+}
+static inline void mem_cgroup_replace_page_cache(struct page *oldpage,
+				struct page *newpage)
+{
+}
+#endif /* CONFIG_CGROUP_MEM_RES_CTLR */
+
+#if !defined(CONFIG_CGROUP_MEM_RES_CTLR) || !defined(CONFIG_DEBUG_VM)
+static inline bool
+mem_cgroup_bad_page_check(struct page *page)
+{
+	return false;
+}
+
+static inline void
+mem_cgroup_print_bad_page(struct page *page)
+{
+}
+#endif
+
+enum {
+	UNDER_LIMIT,
+	SOFT_LIMIT,
+	OVER_LIMIT,
+};
+
+struct sock;
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR_KMEM
+void sock_update_memcg(struct sock *sk);
+void sock_release_memcg(struct sock *sk);
+#else
+static inline void sock_update_memcg(struct sock *sk)
+{
+}
+static inline void sock_release_memcg(struct sock *sk)
+{
+}
+#endif /* CONFIG_CGROUP_MEM_RES_CTLR_KMEM */
+#endif /* _LINUX_MEMCONTROL_H */
+
diff --git a/include/linux/memory.h b/include/linux/memory.h
new file mode 100644
index 00000000..1ac7f6e4
--- /dev/null
+++ b/include/linux/memory.h
@@ -0,0 +1,154 @@
+/*
+ * include/linux/memory.h - generic memory definition
+ *
+ * This is mainly for topological representation. We define the
+ * basic "struct memory_block" here, which can be embedded in per-arch
+ * definitions or NUMA information.
+ *
+ * Basic handling of the devices is done in drivers/base/memory.c
+ * and system devices are handled in drivers/base/sys.c.
+ *
+ * Memory block are exported via sysfs in the class/memory/devices/
+ * directory.
+ *
+ */
+#ifndef _LINUX_MEMORY_H_
+#define _LINUX_MEMORY_H_
+
+#include <linux/node.h>
+#include <linux/compiler.h>
+#include <linux/mutex.h>
+
+#define MIN_MEMORY_BLOCK_SIZE     (1 << SECTION_SIZE_BITS)
+
+struct memory_block {
+	unsigned long start_section_nr;
+	unsigned long end_section_nr;
+	unsigned long state;
+	int section_count;
+
+	/*
+	 * This serializes all state change requests.  It isn't
+	 * held during creation because the control files are
+	 * created long after the critical areas during
+	 * initialization.
+	 */
+	struct mutex state_mutex;
+	int phys_device;		/* to which fru does this belong? */
+	void *hw;			/* optional pointer to fw/hw data */
+	int (*phys_callback)(struct memory_block *);
+	struct device dev;
+};
+
+int arch_get_memory_phys_device(unsigned long start_pfn);
+
+/* These states are exposed to userspace as text strings in sysfs */
+#define	MEM_ONLINE		(1<<0) /* exposed to userspace */
+#define	MEM_GOING_OFFLINE	(1<<1) /* exposed to userspace */
+#define	MEM_OFFLINE		(1<<2) /* exposed to userspace */
+#define	MEM_GOING_ONLINE	(1<<3)
+#define	MEM_CANCEL_ONLINE	(1<<4)
+#define	MEM_CANCEL_OFFLINE	(1<<5)
+
+struct memory_notify {
+	unsigned long start_pfn;
+	unsigned long nr_pages;
+	int status_change_nid;
+};
+
+/*
+ * During pageblock isolation, count the number of pages within the
+ * range [start_pfn, start_pfn + nr_pages) which are owned by code
+ * in the notifier chain.
+ */
+#define MEM_ISOLATE_COUNT	(1<<0)
+
+struct memory_isolate_notify {
+	unsigned long start_pfn;	/* Start of range to check */
+	unsigned int nr_pages;		/* # pages in range to check */
+	unsigned int pages_found;	/* # pages owned found by callbacks */
+};
+
+struct notifier_block;
+struct mem_section;
+
+/*
+ * Priorities for the hotplug memory callback routines (stored in decreasing
+ * order in the callback chain)
+ */
+#define SLAB_CALLBACK_PRI       1
+#define IPC_CALLBACK_PRI        10
+
+#ifndef CONFIG_MEMORY_HOTPLUG_SPARSE
+static inline int memory_dev_init(void)
+{
+	return 0;
+}
+static inline int register_memory_notifier(struct notifier_block *nb)
+{
+	return 0;
+}
+static inline void unregister_memory_notifier(struct notifier_block *nb)
+{
+}
+static inline int memory_notify(unsigned long val, void *v)
+{
+	return 0;
+}
+static inline int register_memory_isolate_notifier(struct notifier_block *nb)
+{
+	return 0;
+}
+static inline void unregister_memory_isolate_notifier(struct notifier_block *nb)
+{
+}
+static inline int memory_isolate_notify(unsigned long val, void *v)
+{
+	return 0;
+}
+#else
+extern int register_memory_notifier(struct notifier_block *nb);
+extern void unregister_memory_notifier(struct notifier_block *nb);
+extern int register_memory_isolate_notifier(struct notifier_block *nb);
+extern void unregister_memory_isolate_notifier(struct notifier_block *nb);
+extern int register_new_memory(int, struct mem_section *);
+extern int unregister_memory_section(struct mem_section *);
+extern int memory_dev_init(void);
+extern int remove_memory_block(unsigned long, struct mem_section *, int);
+extern int memory_notify(unsigned long val, void *v);
+extern int memory_isolate_notify(unsigned long val, void *v);
+extern struct memory_block *find_memory_block_hinted(struct mem_section *,
+							struct memory_block *);
+extern struct memory_block *find_memory_block(struct mem_section *);
+#define CONFIG_MEM_BLOCK_SIZE	(PAGES_PER_SECTION<<PAGE_SHIFT)
+enum mem_add_context { BOOT, HOTPLUG };
+#endif /* CONFIG_MEMORY_HOTPLUG_SPARSE */
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+#define hotplug_memory_notifier(fn, pri) {			\
+	static __meminitdata struct notifier_block fn##_mem_nb =\
+		{ .notifier_call = fn, .priority = pri };	\
+	register_memory_notifier(&fn##_mem_nb);			\
+}
+#else
+#define hotplug_memory_notifier(fn, pri) do { } while (0)
+#endif
+
+/*
+ * 'struct memory_accessor' is a generic interface to provide
+ * in-kernel access to persistent memory such as i2c or SPI EEPROMs
+ */
+struct memory_accessor {
+	ssize_t (*read)(struct memory_accessor *, char *buf, off_t offset,
+			size_t count);
+	ssize_t (*write)(struct memory_accessor *, const char *buf,
+			 off_t offset, size_t count);
+};
+
+/*
+ * Kernel text modification mutex, used for code patching. Users of this lock
+ * can sleep.
+ */
+extern struct mutex text_mutex;
+
+#endif /* _LINUX_MEMORY_H_ */
diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
new file mode 100644
index 00000000..910550f3
--- /dev/null
+++ b/include/linux/memory_hotplug.h
@@ -0,0 +1,243 @@
+#ifndef __LINUX_MEMORY_HOTPLUG_H
+#define __LINUX_MEMORY_HOTPLUG_H
+
+#include <linux/mmzone.h>
+#include <linux/spinlock.h>
+#include <linux/notifier.h>
+#include <linux/bug.h>
+
+struct page;
+struct zone;
+struct pglist_data;
+struct mem_section;
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+
+/*
+ * Types for free bootmem stored in page->lru.next. These have to be in
+ * some random range in unsigned long space for debugging purposes.
+ */
+enum {
+	MEMORY_HOTPLUG_MIN_BOOTMEM_TYPE = 12,
+	SECTION_INFO = MEMORY_HOTPLUG_MIN_BOOTMEM_TYPE,
+	MIX_SECTION_INFO,
+	NODE_INFO,
+	MEMORY_HOTPLUG_MAX_BOOTMEM_TYPE = NODE_INFO,
+};
+
+/*
+ * pgdat resizing functions
+ */
+static inline
+void pgdat_resize_lock(struct pglist_data *pgdat, unsigned long *flags)
+{
+	spin_lock_irqsave(&pgdat->node_size_lock, *flags);
+}
+static inline
+void pgdat_resize_unlock(struct pglist_data *pgdat, unsigned long *flags)
+{
+	spin_unlock_irqrestore(&pgdat->node_size_lock, *flags);
+}
+static inline
+void pgdat_resize_init(struct pglist_data *pgdat)
+{
+	spin_lock_init(&pgdat->node_size_lock);
+}
+/*
+ * Zone resizing functions
+ */
+static inline unsigned zone_span_seqbegin(struct zone *zone)
+{
+	return read_seqbegin(&zone->span_seqlock);
+}
+static inline int zone_span_seqretry(struct zone *zone, unsigned iv)
+{
+	return read_seqretry(&zone->span_seqlock, iv);
+}
+static inline void zone_span_writelock(struct zone *zone)
+{
+	write_seqlock(&zone->span_seqlock);
+}
+static inline void zone_span_writeunlock(struct zone *zone)
+{
+	write_sequnlock(&zone->span_seqlock);
+}
+static inline void zone_seqlock_init(struct zone *zone)
+{
+	seqlock_init(&zone->span_seqlock);
+}
+extern int zone_grow_free_lists(struct zone *zone, unsigned long new_nr_pages);
+extern int zone_grow_waitqueues(struct zone *zone, unsigned long nr_pages);
+extern int add_one_highpage(struct page *page, int pfn, int bad_ppro);
+/* VM interface that may be used by firmware interface */
+extern int online_pages(unsigned long, unsigned long);
+extern void __offline_isolated_pages(unsigned long, unsigned long);
+
+typedef void (*online_page_callback_t)(struct page *page);
+
+extern int set_online_page_callback(online_page_callback_t callback);
+extern int restore_online_page_callback(online_page_callback_t callback);
+
+extern void __online_page_set_limits(struct page *page);
+extern void __online_page_increment_counters(struct page *page);
+extern void __online_page_free(struct page *page);
+
+#ifdef CONFIG_MEMORY_HOTREMOVE
+extern bool is_pageblock_removable_nolock(struct page *page);
+#endif /* CONFIG_MEMORY_HOTREMOVE */
+
+/* reasonably generic interface to expand the physical pages in a zone  */
+extern int __add_pages(int nid, struct zone *zone, unsigned long start_pfn,
+	unsigned long nr_pages);
+extern int __remove_pages(struct zone *zone, unsigned long start_pfn,
+	unsigned long nr_pages);
+
+#ifdef CONFIG_NUMA
+extern int memory_add_physaddr_to_nid(u64 start);
+#else
+static inline int memory_add_physaddr_to_nid(u64 start)
+{
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_HAVE_ARCH_NODEDATA_EXTENSION
+/*
+ * For supporting node-hotadd, we have to allocate a new pgdat.
+ *
+ * If an arch has generic style NODE_DATA(),
+ * node_data[nid] = kzalloc() works well. But it depends on the architecture.
+ *
+ * In general, generic_alloc_nodedata() is used.
+ * Now, arch_free_nodedata() is just defined for error path of node_hot_add.
+ *
+ */
+extern pg_data_t *arch_alloc_nodedata(int nid);
+extern void arch_free_nodedata(pg_data_t *pgdat);
+extern void arch_refresh_nodedata(int nid, pg_data_t *pgdat);
+
+#else /* CONFIG_HAVE_ARCH_NODEDATA_EXTENSION */
+
+#define arch_alloc_nodedata(nid)	generic_alloc_nodedata(nid)
+#define arch_free_nodedata(pgdat)	generic_free_nodedata(pgdat)
+
+#ifdef CONFIG_NUMA
+/*
+ * If ARCH_HAS_NODEDATA_EXTENSION=n, this func is used to allocate pgdat.
+ * XXX: kmalloc_node() can't work well to get new node's memory at this time.
+ *	Because, pgdat for the new node is not allocated/initialized yet itself.
+ *	To use new node's memory, more consideration will be necessary.
+ */
+#define generic_alloc_nodedata(nid)				\
+({								\
+	kzalloc(sizeof(pg_data_t), GFP_KERNEL);			\
+})
+/*
+ * This definition is just for error path in node hotadd.
+ * For node hotremove, we have to replace this.
+ */
+#define generic_free_nodedata(pgdat)	kfree(pgdat)
+
+extern pg_data_t *node_data[];
+static inline void arch_refresh_nodedata(int nid, pg_data_t *pgdat)
+{
+	node_data[nid] = pgdat;
+}
+
+#else /* !CONFIG_NUMA */
+
+/* never called */
+static inline pg_data_t *generic_alloc_nodedata(int nid)
+{
+	BUG();
+	return NULL;
+}
+static inline void generic_free_nodedata(pg_data_t *pgdat)
+{
+}
+static inline void arch_refresh_nodedata(int nid, pg_data_t *pgdat)
+{
+}
+#endif /* CONFIG_NUMA */
+#endif /* CONFIG_HAVE_ARCH_NODEDATA_EXTENSION */
+
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+static inline void register_page_bootmem_info_node(struct pglist_data *pgdat)
+{
+}
+static inline void put_page_bootmem(struct page *page)
+{
+}
+#else
+extern void register_page_bootmem_info_node(struct pglist_data *pgdat);
+extern void put_page_bootmem(struct page *page);
+#endif
+
+/*
+ * Lock for memory hotplug guarantees 1) all callbacks for memory hotplug
+ * notifier will be called under this. 2) offline/online/add/remove memory
+ * will not run simultaneously.
+ */
+
+void lock_memory_hotplug(void);
+void unlock_memory_hotplug(void);
+
+#else /* ! CONFIG_MEMORY_HOTPLUG */
+/*
+ * Stub functions for when hotplug is off
+ */
+static inline void pgdat_resize_lock(struct pglist_data *p, unsigned long *f) {}
+static inline void pgdat_resize_unlock(struct pglist_data *p, unsigned long *f) {}
+static inline void pgdat_resize_init(struct pglist_data *pgdat) {}
+
+static inline unsigned zone_span_seqbegin(struct zone *zone)
+{
+	return 0;
+}
+static inline int zone_span_seqretry(struct zone *zone, unsigned iv)
+{
+	return 0;
+}
+static inline void zone_span_writelock(struct zone *zone) {}
+static inline void zone_span_writeunlock(struct zone *zone) {}
+static inline void zone_seqlock_init(struct zone *zone) {}
+
+static inline int mhp_notimplemented(const char *func)
+{
+	printk(KERN_WARNING "%s() called, with CONFIG_MEMORY_HOTPLUG disabled\n", func);
+	dump_stack();
+	return -ENOSYS;
+}
+
+static inline void register_page_bootmem_info_node(struct pglist_data *pgdat)
+{
+}
+
+static inline void lock_memory_hotplug(void) {}
+static inline void unlock_memory_hotplug(void) {}
+
+#endif /* ! CONFIG_MEMORY_HOTPLUG */
+
+#ifdef CONFIG_MEMORY_HOTREMOVE
+
+extern int is_mem_section_removable(unsigned long pfn, unsigned long nr_pages);
+
+#else
+static inline int is_mem_section_removable(unsigned long pfn,
+					unsigned long nr_pages)
+{
+	return 0;
+}
+#endif /* CONFIG_MEMORY_HOTREMOVE */
+
+extern int mem_online_node(int nid);
+extern int add_memory(int nid, u64 start, u64 size);
+extern int arch_add_memory(int nid, u64 start, u64 size);
+extern int remove_memory(u64 start, u64 size);
+extern int sparse_add_one_section(struct zone *zone, unsigned long start_pfn,
+								int nr_pages);
+extern void sparse_remove_one_section(struct zone *zone, struct mem_section *ms);
+extern struct page *sparse_decode_mem_map(unsigned long coded_mem_map,
+					  unsigned long pnum);
+
+#endif /* __LINUX_MEMORY_HOTPLUG_H */
diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h
new file mode 100644
index 00000000..7c727a90
--- /dev/null
+++ b/include/linux/mempolicy.h
@@ -0,0 +1,385 @@
+#ifndef _LINUX_MEMPOLICY_H
+#define _LINUX_MEMPOLICY_H 1
+
+#include <linux/errno.h>
+
+/*
+ * NUMA memory policies for Linux.
+ * Copyright 2003,2004 Andi Kleen SuSE Labs
+ */
+
+/*
+ * Both the MPOL_* mempolicy mode and the MPOL_F_* optional mode flags are
+ * passed by the user to either set_mempolicy() or mbind() in an 'int' actual.
+ * The MPOL_MODE_FLAGS macro determines the legal set of optional mode flags.
+ */
+
+/* Policies */
+enum {
+	MPOL_DEFAULT,
+	MPOL_PREFERRED,
+	MPOL_BIND,
+	MPOL_INTERLEAVE,
+	MPOL_MAX,	/* always last member of enum */
+};
+
+enum mpol_rebind_step {
+	MPOL_REBIND_ONCE,	/* do rebind work at once(not by two step) */
+	MPOL_REBIND_STEP1,	/* first step(set all the newly nodes) */
+	MPOL_REBIND_STEP2,	/* second step(clean all the disallowed nodes)*/
+	MPOL_REBIND_NSTEP,
+};
+
+/* Flags for set_mempolicy */
+#define MPOL_F_STATIC_NODES	(1 << 15)
+#define MPOL_F_RELATIVE_NODES	(1 << 14)
+
+/*
+ * MPOL_MODE_FLAGS is the union of all possible optional mode flags passed to
+ * either set_mempolicy() or mbind().
+ */
+#define MPOL_MODE_FLAGS	(MPOL_F_STATIC_NODES | MPOL_F_RELATIVE_NODES)
+
+/* Flags for get_mempolicy */
+#define MPOL_F_NODE	(1<<0)	/* return next IL mode instead of node mask */
+#define MPOL_F_ADDR	(1<<1)	/* look up vma using address */
+#define MPOL_F_MEMS_ALLOWED (1<<2) /* return allowed memories */
+
+/* Flags for mbind */
+#define MPOL_MF_STRICT	(1<<0)	/* Verify existing pages in the mapping */
+#define MPOL_MF_MOVE	(1<<1)	/* Move pages owned by this process to conform to mapping */
+#define MPOL_MF_MOVE_ALL (1<<2)	/* Move every page to conform to mapping */
+#define MPOL_MF_INTERNAL (1<<3)	/* Internal flags start here */
+
+/*
+ * Internal flags that share the struct mempolicy flags word with
+ * "mode flags".  These flags are allocated from bit 0 up, as they
+ * are never OR'ed into the mode in mempolicy API arguments.
+ */
+#define MPOL_F_SHARED  (1 << 0)	/* identify shared policies */
+#define MPOL_F_LOCAL   (1 << 1)	/* preferred local allocation */
+#define MPOL_F_REBINDING (1 << 2)	/* identify policies in rebinding */
+
+#ifdef __KERNEL__
+
+#include <linux/mmzone.h>
+#include <linux/slab.h>
+#include <linux/rbtree.h>
+#include <linux/spinlock.h>
+#include <linux/nodemask.h>
+#include <linux/pagemap.h>
+
+struct mm_struct;
+
+#ifdef CONFIG_NUMA
+
+/*
+ * Describe a memory policy.
+ *
+ * A mempolicy can be either associated with a process or with a VMA.
+ * For VMA related allocations the VMA policy is preferred, otherwise
+ * the process policy is used. Interrupts ignore the memory policy
+ * of the current process.
+ *
+ * Locking policy for interlave:
+ * In process context there is no locking because only the process accesses
+ * its own state. All vma manipulation is somewhat protected by a down_read on
+ * mmap_sem.
+ *
+ * Freeing policy:
+ * Mempolicy objects are reference counted.  A mempolicy will be freed when
+ * mpol_put() decrements the reference count to zero.
+ *
+ * Duplicating policy objects:
+ * mpol_dup() allocates a new mempolicy and copies the specified mempolicy
+ * to the new storage.  The reference count of the new object is initialized
+ * to 1, representing the caller of mpol_dup().
+ */
+struct mempolicy {
+	atomic_t refcnt;
+	unsigned short mode; 	/* See MPOL_* above */
+	unsigned short flags;	/* See set_mempolicy() MPOL_F_* above */
+	union {
+		short 		 preferred_node; /* preferred */
+		nodemask_t	 nodes;		/* interleave/bind */
+		/* undefined for default */
+	} v;
+	union {
+		nodemask_t cpuset_mems_allowed;	/* relative to these nodes */
+		nodemask_t user_nodemask;	/* nodemask passed by user */
+	} w;
+};
+
+/*
+ * Support for managing mempolicy data objects (clone, copy, destroy)
+ * The default fast path of a NULL MPOL_DEFAULT policy is always inlined.
+ */
+
+extern void __mpol_put(struct mempolicy *pol);
+static inline void mpol_put(struct mempolicy *pol)
+{
+	if (pol)
+		__mpol_put(pol);
+}
+
+/*
+ * Does mempolicy pol need explicit unref after use?
+ * Currently only needed for shared policies.
+ */
+static inline int mpol_needs_cond_ref(struct mempolicy *pol)
+{
+	return (pol && (pol->flags & MPOL_F_SHARED));
+}
+
+static inline void mpol_cond_put(struct mempolicy *pol)
+{
+	if (mpol_needs_cond_ref(pol))
+		__mpol_put(pol);
+}
+
+extern struct mempolicy *__mpol_cond_copy(struct mempolicy *tompol,
+					  struct mempolicy *frompol);
+static inline struct mempolicy *mpol_cond_copy(struct mempolicy *tompol,
+						struct mempolicy *frompol)
+{
+	if (!frompol)
+		return frompol;
+	return __mpol_cond_copy(tompol, frompol);
+}
+
+extern struct mempolicy *__mpol_dup(struct mempolicy *pol);
+static inline struct mempolicy *mpol_dup(struct mempolicy *pol)
+{
+	if (pol)
+		pol = __mpol_dup(pol);
+	return pol;
+}
+
+#define vma_policy(vma) ((vma)->vm_policy)
+#define vma_set_policy(vma, pol) ((vma)->vm_policy = (pol))
+
+static inline void mpol_get(struct mempolicy *pol)
+{
+	if (pol)
+		atomic_inc(&pol->refcnt);
+}
+
+extern bool __mpol_equal(struct mempolicy *a, struct mempolicy *b);
+static inline bool mpol_equal(struct mempolicy *a, struct mempolicy *b)
+{
+	if (a == b)
+		return true;
+	return __mpol_equal(a, b);
+}
+
+/*
+ * Tree of shared policies for a shared memory region.
+ * Maintain the policies in a pseudo mm that contains vmas. The vmas
+ * carry the policy. As a special twist the pseudo mm is indexed in pages, not
+ * bytes, so that we can work with shared memory segments bigger than
+ * unsigned long.
+ */
+
+struct sp_node {
+	struct rb_node nd;
+	unsigned long start, end;
+	struct mempolicy *policy;
+};
+
+struct shared_policy {
+	struct rb_root root;
+	spinlock_t lock;
+};
+
+void mpol_shared_policy_init(struct shared_policy *sp, struct mempolicy *mpol);
+int mpol_set_shared_policy(struct shared_policy *info,
+				struct vm_area_struct *vma,
+				struct mempolicy *new);
+void mpol_free_shared_policy(struct shared_policy *p);
+struct mempolicy *mpol_shared_policy_lookup(struct shared_policy *sp,
+					    unsigned long idx);
+
+struct mempolicy *get_vma_policy(struct task_struct *tsk,
+		struct vm_area_struct *vma, unsigned long addr);
+
+extern void numa_default_policy(void);
+extern void numa_policy_init(void);
+extern void mpol_rebind_task(struct task_struct *tsk, const nodemask_t *new,
+				enum mpol_rebind_step step);
+extern void mpol_rebind_mm(struct mm_struct *mm, nodemask_t *new);
+extern void mpol_fix_fork_child_flag(struct task_struct *p);
+
+extern struct zonelist *huge_zonelist(struct vm_area_struct *vma,
+				unsigned long addr, gfp_t gfp_flags,
+				struct mempolicy **mpol, nodemask_t **nodemask);
+extern bool init_nodemask_of_mempolicy(nodemask_t *mask);
+extern bool mempolicy_nodemask_intersects(struct task_struct *tsk,
+				const nodemask_t *mask);
+extern unsigned slab_node(struct mempolicy *policy);
+
+extern enum zone_type policy_zone;
+
+static inline void check_highest_zone(enum zone_type k)
+{
+	if (k > policy_zone && k != ZONE_MOVABLE)
+		policy_zone = k;
+}
+
+int do_migrate_pages(struct mm_struct *mm,
+	const nodemask_t *from_nodes, const nodemask_t *to_nodes, int flags);
+
+
+#ifdef CONFIG_TMPFS
+extern int mpol_parse_str(char *str, struct mempolicy **mpol, int no_context);
+#endif
+
+extern int mpol_to_str(char *buffer, int maxlen, struct mempolicy *pol,
+			int no_context);
+
+/* Check if a vma is migratable */
+static inline int vma_migratable(struct vm_area_struct *vma)
+{
+	if (vma->vm_flags & (VM_IO|VM_HUGETLB|VM_PFNMAP|VM_RESERVED))
+		return 0;
+	/*
+	 * Migration allocates pages in the highest zone. If we cannot
+	 * do so then migration (at least from node to node) is not
+	 * possible.
+	 */
+	if (vma->vm_file &&
+		gfp_zone(mapping_gfp_mask(vma->vm_file->f_mapping))
+								< policy_zone)
+			return 0;
+	return 1;
+}
+
+#else
+
+struct mempolicy {};
+
+static inline bool mpol_equal(struct mempolicy *a, struct mempolicy *b)
+{
+	return true;
+}
+
+static inline void mpol_put(struct mempolicy *p)
+{
+}
+
+static inline void mpol_cond_put(struct mempolicy *pol)
+{
+}
+
+static inline struct mempolicy *mpol_cond_copy(struct mempolicy *to,
+						struct mempolicy *from)
+{
+	return from;
+}
+
+static inline void mpol_get(struct mempolicy *pol)
+{
+}
+
+static inline struct mempolicy *mpol_dup(struct mempolicy *old)
+{
+	return NULL;
+}
+
+struct shared_policy {};
+
+static inline int mpol_set_shared_policy(struct shared_policy *info,
+					struct vm_area_struct *vma,
+					struct mempolicy *new)
+{
+	return -EINVAL;
+}
+
+static inline void mpol_shared_policy_init(struct shared_policy *sp,
+						struct mempolicy *mpol)
+{
+}
+
+static inline void mpol_free_shared_policy(struct shared_policy *p)
+{
+}
+
+static inline struct mempolicy *
+mpol_shared_policy_lookup(struct shared_policy *sp, unsigned long idx)
+{
+	return NULL;
+}
+
+#define vma_policy(vma) NULL
+#define vma_set_policy(vma, pol) do {} while(0)
+
+static inline void numa_policy_init(void)
+{
+}
+
+static inline void numa_default_policy(void)
+{
+}
+
+static inline void mpol_rebind_task(struct task_struct *tsk,
+				const nodemask_t *new,
+				enum mpol_rebind_step step)
+{
+}
+
+static inline void mpol_rebind_mm(struct mm_struct *mm, nodemask_t *new)
+{
+}
+
+static inline void mpol_fix_fork_child_flag(struct task_struct *p)
+{
+}
+
+static inline struct zonelist *huge_zonelist(struct vm_area_struct *vma,
+				unsigned long addr, gfp_t gfp_flags,
+				struct mempolicy **mpol, nodemask_t **nodemask)
+{
+	*mpol = NULL;
+	*nodemask = NULL;
+	return node_zonelist(0, gfp_flags);
+}
+
+static inline bool init_nodemask_of_mempolicy(nodemask_t *m)
+{
+	return false;
+}
+
+static inline bool mempolicy_nodemask_intersects(struct task_struct *tsk,
+			const nodemask_t *mask)
+{
+	return false;
+}
+
+static inline int do_migrate_pages(struct mm_struct *mm,
+			const nodemask_t *from_nodes,
+			const nodemask_t *to_nodes, int flags)
+{
+	return 0;
+}
+
+static inline void check_highest_zone(int k)
+{
+}
+
+#ifdef CONFIG_TMPFS
+static inline int mpol_parse_str(char *str, struct mempolicy **mpol,
+				int no_context)
+{
+	return 1;	/* error */
+}
+#endif
+
+static inline int mpol_to_str(char *buffer, int maxlen, struct mempolicy *pol,
+				int no_context)
+{
+	return 0;
+}
+
+#endif /* CONFIG_NUMA */
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/linux/mempool.h b/include/linux/mempool.h
new file mode 100644
index 00000000..7c08052e
--- /dev/null
+++ b/include/linux/mempool.h
@@ -0,0 +1,73 @@
+/*
+ * memory buffer pool support
+ */
+#ifndef _LINUX_MEMPOOL_H
+#define _LINUX_MEMPOOL_H
+
+#include <linux/wait.h>
+
+struct kmem_cache;
+
+typedef void * (mempool_alloc_t)(gfp_t gfp_mask, void *pool_data);
+typedef void (mempool_free_t)(void *element, void *pool_data);
+
+typedef struct mempool_s {
+	spinlock_t lock;
+	int min_nr;		/* nr of elements at *elements */
+	int curr_nr;		/* Current nr of elements at *elements */
+	void **elements;
+
+	void *pool_data;
+	mempool_alloc_t *alloc;
+	mempool_free_t *free;
+	wait_queue_head_t wait;
+} mempool_t;
+
+extern mempool_t *mempool_create(int min_nr, mempool_alloc_t *alloc_fn,
+			mempool_free_t *free_fn, void *pool_data);
+extern mempool_t *mempool_create_node(int min_nr, mempool_alloc_t *alloc_fn,
+			mempool_free_t *free_fn, void *pool_data, int nid);
+
+extern int mempool_resize(mempool_t *pool, int new_min_nr, gfp_t gfp_mask);
+extern void mempool_destroy(mempool_t *pool);
+extern void * mempool_alloc(mempool_t *pool, gfp_t gfp_mask);
+extern void mempool_free(void *element, mempool_t *pool);
+
+/*
+ * A mempool_alloc_t and mempool_free_t that get the memory from
+ * a slab that is passed in through pool_data.
+ */
+void *mempool_alloc_slab(gfp_t gfp_mask, void *pool_data);
+void mempool_free_slab(void *element, void *pool_data);
+static inline mempool_t *
+mempool_create_slab_pool(int min_nr, struct kmem_cache *kc)
+{
+	return mempool_create(min_nr, mempool_alloc_slab, mempool_free_slab,
+			      (void *) kc);
+}
+
+/*
+ * a mempool_alloc_t and a mempool_free_t to kmalloc and kfree the
+ * amount of memory specified by pool_data
+ */
+void *mempool_kmalloc(gfp_t gfp_mask, void *pool_data);
+void mempool_kfree(void *element, void *pool_data);
+static inline mempool_t *mempool_create_kmalloc_pool(int min_nr, size_t size)
+{
+	return mempool_create(min_nr, mempool_kmalloc, mempool_kfree,
+			      (void *) size);
+}
+
+/*
+ * A mempool_alloc_t and mempool_free_t for a simple page allocator that
+ * allocates pages of the order specified by pool_data
+ */
+void *mempool_alloc_pages(gfp_t gfp_mask, void *pool_data);
+void mempool_free_pages(void *element, void *pool_data);
+static inline mempool_t *mempool_create_page_pool(int min_nr, int order)
+{
+	return mempool_create(min_nr, mempool_alloc_pages, mempool_free_pages,
+			      (void *)(long)order);
+}
+
+#endif /* _LINUX_MEMPOOL_H */
diff --git a/include/linux/memstick.h b/include/linux/memstick.h
new file mode 100644
index 00000000..690c35a9
--- /dev/null
+++ b/include/linux/memstick.h
@@ -0,0 +1,347 @@
+/*
+ *  Sony MemoryStick support
+ *
+ *  Copyright (C) 2007 Alex Dubov <oakad@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MEMSTICK_H
+#define _MEMSTICK_H
+
+#include <linux/workqueue.h>
+#include <linux/scatterlist.h>
+#include <linux/device.h>
+
+/*** Hardware based structures ***/
+
+struct ms_status_register {
+	unsigned char reserved;
+	unsigned char interrupt;
+#define MEMSTICK_INT_CMDNAK 0x01
+#define MEMSTICK_INT_IOREQ  0x08
+#define MEMSTICK_INT_IOBREQ 0x10
+#define MEMSTICK_INT_BREQ   0x20
+#define MEMSTICK_INT_ERR    0x40
+#define MEMSTICK_INT_CED    0x80
+
+	unsigned char status0;
+#define MEMSTICK_STATUS0_WP  0x01
+#define MEMSTICK_STATUS0_SL  0x02
+#define MEMSTICK_STATUS0_BF  0x10
+#define MEMSTICK_STATUS0_BE  0x20
+#define MEMSTICK_STATUS0_FB0 0x40
+#define MEMSTICK_STATUS0_MB  0x80
+
+	unsigned char status1;
+#define MEMSTICK_STATUS1_UCFG 0x01
+#define MEMSTICK_STATUS1_FGER 0x02
+#define MEMSTICK_STATUS1_UCEX 0x04
+#define MEMSTICK_STATUS1_EXER 0x08
+#define MEMSTICK_STATUS1_UCDT 0x10
+#define MEMSTICK_STATUS1_DTER 0x20
+#define MEMSTICK_STATUS1_FB1  0x40
+#define MEMSTICK_STATUS1_MB   0x80
+} __attribute__((packed));
+
+struct ms_id_register {
+	unsigned char type;
+	unsigned char if_mode;
+	unsigned char category;
+	unsigned char class;
+} __attribute__((packed));
+
+struct ms_param_register {
+	unsigned char system;
+#define MEMSTICK_SYS_PAM  0x08
+#define MEMSTICK_SYS_BAMD 0x80
+
+	unsigned char block_address_msb;
+	unsigned short block_address;
+	unsigned char cp;
+#define MEMSTICK_CP_BLOCK     0x00
+#define MEMSTICK_CP_PAGE      0x20
+#define MEMSTICK_CP_EXTRA     0x40
+#define MEMSTICK_CP_OVERWRITE 0x80
+
+	unsigned char page_address;
+} __attribute__((packed));
+
+struct ms_extra_data_register {
+	unsigned char  overwrite_flag;
+#define MEMSTICK_OVERWRITE_UDST  0x10
+#define MEMSTICK_OVERWRITE_PGST1 0x20
+#define MEMSTICK_OVERWRITE_PGST0 0x40
+#define MEMSTICK_OVERWRITE_BKST  0x80
+
+	unsigned char  management_flag;
+#define MEMSTICK_MANAGEMENT_SYSFLG 0x04
+#define MEMSTICK_MANAGEMENT_ATFLG  0x08
+#define MEMSTICK_MANAGEMENT_SCMS1  0x10
+#define MEMSTICK_MANAGEMENT_SCMS0  0x20
+
+	unsigned short logical_address;
+} __attribute__((packed));
+
+struct ms_register {
+	struct ms_status_register     status;
+	struct ms_id_register         id;
+	unsigned char                 reserved[8];
+	struct ms_param_register      param;
+	struct ms_extra_data_register extra_data;
+} __attribute__((packed));
+
+struct mspro_param_register {
+	unsigned char  system;
+#define MEMSTICK_SYS_PAR4   0x00
+#define MEMSTICK_SYS_PAR8   0x40
+#define MEMSTICK_SYS_SERIAL 0x80
+
+	__be16 data_count;
+	__be32 data_address;
+	unsigned char  tpc_param;
+} __attribute__((packed));
+
+struct mspro_io_info_register {
+	unsigned char version;
+	unsigned char io_category;
+	unsigned char current_req;
+	unsigned char card_opt_info;
+	unsigned char rdy_wait_time;
+} __attribute__((packed));
+
+struct mspro_io_func_register {
+	unsigned char func_enable;
+	unsigned char func_select;
+	unsigned char func_intmask;
+	unsigned char transfer_mode;
+} __attribute__((packed));
+
+struct mspro_io_cmd_register {
+	unsigned short tpc_param;
+	unsigned short data_count;
+	unsigned int   data_address;
+} __attribute__((packed));
+
+struct mspro_register {
+	struct ms_status_register     status;
+	struct ms_id_register         id;
+	unsigned char                 reserved0[8];
+	struct mspro_param_register   param;
+	unsigned char                 reserved1[8];
+	struct mspro_io_info_register io_info;
+	struct mspro_io_func_register io_func;
+	unsigned char                 reserved2[7];
+	struct mspro_io_cmd_register  io_cmd;
+	unsigned char                 io_int;
+	unsigned char                 io_int_func;
+} __attribute__((packed));
+
+struct ms_register_addr {
+	unsigned char r_offset;
+	unsigned char r_length;
+	unsigned char w_offset;
+	unsigned char w_length;
+} __attribute__((packed));
+
+enum memstick_tpc {
+	MS_TPC_READ_MG_STATUS   = 0x01,
+	MS_TPC_READ_LONG_DATA   = 0x02,
+	MS_TPC_READ_SHORT_DATA  = 0x03,
+	MS_TPC_READ_MG_DATA     = 0x03,
+	MS_TPC_READ_REG         = 0x04,
+	MS_TPC_READ_QUAD_DATA   = 0x05,
+	MS_TPC_READ_IO_DATA     = 0x05,
+	MS_TPC_GET_INT          = 0x07,
+	MS_TPC_SET_RW_REG_ADRS  = 0x08,
+	MS_TPC_EX_SET_CMD       = 0x09,
+	MS_TPC_WRITE_QUAD_DATA  = 0x0a,
+	MS_TPC_WRITE_IO_DATA    = 0x0a,
+	MS_TPC_WRITE_REG        = 0x0b,
+	MS_TPC_WRITE_SHORT_DATA = 0x0c,
+	MS_TPC_WRITE_MG_DATA    = 0x0c,
+	MS_TPC_WRITE_LONG_DATA  = 0x0d,
+	MS_TPC_SET_CMD          = 0x0e
+};
+
+enum memstick_command {
+	MS_CMD_BLOCK_END       = 0x33,
+	MS_CMD_RESET           = 0x3c,
+	MS_CMD_BLOCK_WRITE     = 0x55,
+	MS_CMD_SLEEP           = 0x5a,
+	MS_CMD_BLOCK_ERASE     = 0x99,
+	MS_CMD_BLOCK_READ      = 0xaa,
+	MS_CMD_CLEAR_BUF       = 0xc3,
+	MS_CMD_FLASH_STOP      = 0xcc,
+	MS_CMD_LOAD_ID         = 0x60,
+	MS_CMD_CMP_ICV         = 0x7f,
+	MSPRO_CMD_FORMAT       = 0x10,
+	MSPRO_CMD_SLEEP        = 0x11,
+	MSPRO_CMD_WAKEUP       = 0x12,
+	MSPRO_CMD_READ_DATA    = 0x20,
+	MSPRO_CMD_WRITE_DATA   = 0x21,
+	MSPRO_CMD_READ_ATRB    = 0x24,
+	MSPRO_CMD_STOP         = 0x25,
+	MSPRO_CMD_ERASE        = 0x26,
+	MSPRO_CMD_READ_QUAD    = 0x27,
+	MSPRO_CMD_WRITE_QUAD   = 0x28,
+	MSPRO_CMD_SET_IBD      = 0x46,
+	MSPRO_CMD_GET_IBD      = 0x47,
+	MSPRO_CMD_IN_IO_DATA   = 0xb0,
+	MSPRO_CMD_OUT_IO_DATA  = 0xb1,
+	MSPRO_CMD_READ_IO_ATRB = 0xb2,
+	MSPRO_CMD_IN_IO_FIFO   = 0xb3,
+	MSPRO_CMD_OUT_IO_FIFO  = 0xb4,
+	MSPRO_CMD_IN_IOM       = 0xb5,
+	MSPRO_CMD_OUT_IOM      = 0xb6,
+};
+
+/*** Driver structures and functions ***/
+
+enum memstick_param { MEMSTICK_POWER = 1, MEMSTICK_INTERFACE };
+
+#define MEMSTICK_POWER_OFF 0
+#define MEMSTICK_POWER_ON  1
+
+#define MEMSTICK_SERIAL   0
+#define MEMSTICK_PAR4     1
+#define MEMSTICK_PAR8     2
+
+struct memstick_host;
+struct memstick_driver;
+
+struct memstick_device_id {
+	unsigned char match_flags;
+#define MEMSTICK_MATCH_ALL            0x01
+
+	unsigned char type;
+#define MEMSTICK_TYPE_LEGACY          0xff
+#define MEMSTICK_TYPE_DUO             0x00
+#define MEMSTICK_TYPE_PRO             0x01
+
+	unsigned char category;
+#define MEMSTICK_CATEGORY_STORAGE     0xff
+#define MEMSTICK_CATEGORY_STORAGE_DUO 0x00
+#define MEMSTICK_CATEGORY_IO          0x01
+#define MEMSTICK_CATEGORY_IO_PRO      0x10
+
+	unsigned char class;
+#define MEMSTICK_CLASS_FLASH          0xff
+#define MEMSTICK_CLASS_DUO            0x00
+#define MEMSTICK_CLASS_ROM            0x01
+#define MEMSTICK_CLASS_RO             0x02
+#define MEMSTICK_CLASS_WP             0x03
+};
+
+struct memstick_request {
+	unsigned char tpc;
+	unsigned char data_dir:1,
+		      need_card_int:1,
+		      long_data:1;
+	unsigned char int_reg;
+	int           error;
+	union {
+		struct scatterlist sg;
+		struct {
+			unsigned char data_len;
+			unsigned char data[15];
+		};
+	};
+};
+
+struct memstick_dev {
+	struct memstick_device_id id;
+	struct memstick_host     *host;
+	struct ms_register_addr  reg_addr;
+	struct completion        mrq_complete;
+	struct memstick_request  current_mrq;
+
+	/* Check that media driver is still willing to operate the device. */
+	int                      (*check)(struct memstick_dev *card);
+	/* Get next request from the media driver.                         */
+	int                      (*next_request)(struct memstick_dev *card,
+						 struct memstick_request **mrq);
+	/* Tell the media driver to stop doing things                      */
+	void                     (*stop)(struct memstick_dev *card);
+	/* Allow the media driver to continue                              */
+	void                     (*start)(struct memstick_dev *card);
+
+	struct device            dev;
+};
+
+struct memstick_host {
+	struct mutex        lock;
+	unsigned int        id;
+	unsigned int        caps;
+#define MEMSTICK_CAP_AUTO_GET_INT  1
+#define MEMSTICK_CAP_PAR4          2
+#define MEMSTICK_CAP_PAR8          4
+
+	struct work_struct  media_checker;
+	struct device       dev;
+
+	struct memstick_dev *card;
+	unsigned int        retries;
+
+	/* Notify the host that some requests are pending. */
+	void                (*request)(struct memstick_host *host);
+	/* Set host IO parameters (power, clock, etc).     */
+	int                 (*set_param)(struct memstick_host *host,
+					 enum memstick_param param,
+					 int value);
+	unsigned long       private[0] ____cacheline_aligned;
+};
+
+struct memstick_driver {
+	struct memstick_device_id *id_table;
+	int                       (*probe)(struct memstick_dev *card);
+	void                      (*remove)(struct memstick_dev *card);
+	int                       (*suspend)(struct memstick_dev *card,
+					     pm_message_t state);
+	int                       (*resume)(struct memstick_dev *card);
+
+	struct device_driver      driver;
+};
+
+int memstick_register_driver(struct memstick_driver *drv);
+void memstick_unregister_driver(struct memstick_driver *drv);
+
+struct memstick_host *memstick_alloc_host(unsigned int extra,
+					  struct device *dev);
+
+int memstick_add_host(struct memstick_host *host);
+void memstick_remove_host(struct memstick_host *host);
+void memstick_free_host(struct memstick_host *host);
+void memstick_detect_change(struct memstick_host *host);
+void memstick_suspend_host(struct memstick_host *host);
+void memstick_resume_host(struct memstick_host *host);
+
+void memstick_init_req_sg(struct memstick_request *mrq, unsigned char tpc,
+			  const struct scatterlist *sg);
+void memstick_init_req(struct memstick_request *mrq, unsigned char tpc,
+		       const void *buf, size_t length);
+int memstick_next_req(struct memstick_host *host,
+		      struct memstick_request **mrq);
+void memstick_new_req(struct memstick_host *host);
+
+int memstick_set_rw_addr(struct memstick_dev *card);
+
+static inline void *memstick_priv(struct memstick_host *host)
+{
+	return (void *)host->private;
+}
+
+static inline void *memstick_get_drvdata(struct memstick_dev *card)
+{
+	return dev_get_drvdata(&card->dev);
+}
+
+static inline void memstick_set_drvdata(struct memstick_dev *card, void *data)
+{
+	dev_set_drvdata(&card->dev, data);
+}
+
+#endif
diff --git a/include/linux/meye.h b/include/linux/meye.h
new file mode 100644
index 00000000..0dd49954
--- /dev/null
+++ b/include/linux/meye.h
@@ -0,0 +1,66 @@
+/*
+ * Motion Eye video4linux driver for Sony Vaio PictureBook
+ *
+ * Copyright (C) 2001-2003 Stelian Pop <stelian@popies.net>
+ *
+ * Copyright (C) 2001-2002 Alcôve <www.alcove.com>
+ *
+ * Copyright (C) 2000 Andrew Tridgell <tridge@valinux.com>
+ *
+ * Earlier work by Werner Almesberger, Paul `Rusty' Russell and Paul Mackerras.
+ *
+ * Some parts borrowed from various video4linux drivers, especially
+ * bttv-driver.c and zoran.c, see original files for credits.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _MEYE_H_
+#define _MEYE_H_
+
+/****************************************************************************/
+/* Private API for handling mjpeg capture / playback.                       */
+/****************************************************************************/
+
+struct meye_params {
+	unsigned char subsample;
+	unsigned char quality;
+	unsigned char sharpness;
+	unsigned char agc;
+	unsigned char picture;
+	unsigned char framerate;
+};
+
+/* query the extended parameters */
+#define MEYEIOC_G_PARAMS	_IOR ('v', BASE_VIDIOC_PRIVATE+0, struct meye_params)
+/* set the extended parameters */
+#define MEYEIOC_S_PARAMS	_IOW ('v', BASE_VIDIOC_PRIVATE+1, struct meye_params)
+/* queue a buffer for mjpeg capture */
+#define MEYEIOC_QBUF_CAPT	_IOW ('v', BASE_VIDIOC_PRIVATE+2, int)
+/* sync a previously queued mjpeg buffer */
+#define MEYEIOC_SYNC		_IOWR('v', BASE_VIDIOC_PRIVATE+3, int)
+/* get a still uncompressed snapshot */
+#define MEYEIOC_STILLCAPT	_IO  ('v', BASE_VIDIOC_PRIVATE+4)
+/* get a jpeg compressed snapshot */
+#define MEYEIOC_STILLJCAPT	_IOR ('v', BASE_VIDIOC_PRIVATE+5, int)
+
+/* V4L2 private controls */
+#define V4L2_CID_AGC		V4L2_CID_PRIVATE_BASE
+#define V4L2_CID_MEYE_SHARPNESS	(V4L2_CID_PRIVATE_BASE + 1)
+#define V4L2_CID_PICTURE	(V4L2_CID_PRIVATE_BASE + 2)
+#define V4L2_CID_JPEGQUAL	(V4L2_CID_PRIVATE_BASE + 3)
+#define V4L2_CID_FRAMERATE	(V4L2_CID_PRIVATE_BASE + 4)
+
+#endif
diff --git a/include/linux/mfd/88pm860x.h b/include/linux/mfd/88pm860x.h
new file mode 100644
index 00000000..84d071ad
--- /dev/null
+++ b/include/linux/mfd/88pm860x.h
@@ -0,0 +1,414 @@
+/*
+ * Marvell 88PM860x Interface
+ *
+ * Copyright (C) 2009 Marvell International Ltd.
+ * 	Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_MFD_88PM860X_H
+#define __LINUX_MFD_88PM860X_H
+
+#include <linux/interrupt.h>
+
+#define MFD_NAME_SIZE		(40)
+
+enum {
+	CHIP_INVALID = 0,
+	CHIP_PM8606,
+	CHIP_PM8607,
+	CHIP_MAX,
+};
+
+enum {
+	PM8606_ID_INVALID,
+	PM8606_ID_BACKLIGHT,
+	PM8606_ID_LED,
+	PM8606_ID_VIBRATOR,
+	PM8606_ID_TOUCH,
+	PM8606_ID_SOUND,
+	PM8606_ID_CHARGER,
+	PM8606_ID_MAX,
+};
+
+enum {
+	PM8606_BACKLIGHT1 = 0,
+	PM8606_BACKLIGHT2,
+	PM8606_BACKLIGHT3,
+};
+
+enum {
+	PM8606_LED1_RED = 0,
+	PM8606_LED1_GREEN,
+	PM8606_LED1_BLUE,
+	PM8606_LED2_RED,
+	PM8606_LED2_GREEN,
+	PM8606_LED2_BLUE,
+	PM8607_LED_VIBRATOR,
+};
+
+
+/* 8606 Registers */
+#define PM8606_DCM_BOOST		(0x00)
+#define PM8606_PWM			(0x01)
+
+/* Backlight Registers */
+#define PM8606_WLED1A			(0x02)
+#define PM8606_WLED1B			(0x03)
+#define PM8606_WLED2A			(0x04)
+#define PM8606_WLED2B			(0x05)
+#define PM8606_WLED3A			(0x06)
+#define PM8606_WLED3B			(0x07)
+
+/* LED Registers */
+#define PM8606_RGB2A			(0x08)
+#define PM8606_RGB2B			(0x09)
+#define PM8606_RGB2C			(0x0A)
+#define PM8606_RGB2D			(0x0B)
+#define PM8606_RGB1A			(0x0C)
+#define PM8606_RGB1B			(0x0D)
+#define PM8606_RGB1C			(0x0E)
+#define PM8606_RGB1D			(0x0F)
+
+#define PM8606_PREREGULATORA		(0x10)
+#define PM8606_PREREGULATORB		(0x11)
+#define PM8606_VIBRATORA		(0x12)
+#define PM8606_VIBRATORB		(0x13)
+#define PM8606_VCHG			(0x14)
+#define PM8606_VSYS			(0x15)
+#define PM8606_MISC			(0x16)
+#define PM8606_CHIP_ID			(0x17)
+#define PM8606_STATUS			(0x18)
+#define PM8606_FLAGS			(0x19)
+#define PM8606_PROTECTA			(0x1A)
+#define PM8606_PROTECTB			(0x1B)
+#define PM8606_PROTECTC			(0x1C)
+
+/* Bit definitions of PM8606 registers */
+#define PM8606_DCM_500MA		(0x0)	/* current limit */
+#define PM8606_DCM_750MA		(0x1)
+#define PM8606_DCM_1000MA		(0x2)
+#define PM8606_DCM_1250MA		(0x3)
+#define PM8606_DCM_250MV		(0x0 << 2)
+#define PM8606_DCM_300MV		(0x1 << 2)
+#define PM8606_DCM_350MV		(0x2 << 2)
+#define PM8606_DCM_400MV		(0x3 << 2)
+
+#define PM8606_PWM_31200HZ		(0x0)
+#define PM8606_PWM_15600HZ		(0x1)
+#define PM8606_PWM_7800HZ		(0x2)
+#define PM8606_PWM_3900HZ		(0x3)
+#define PM8606_PWM_1950HZ		(0x4)
+#define PM8606_PWM_976HZ		(0x5)
+#define PM8606_PWM_488HZ		(0x6)
+#define PM8606_PWM_244HZ		(0x7)
+#define PM8606_PWM_FREQ_MASK		(0x7)
+
+#define PM8606_WLED_ON			(1 << 0)
+#define PM8606_WLED_CURRENT(x)		((x & 0x1F) << 1)
+
+#define PM8606_LED_CURRENT(x)		(((x >> 2) & 0x07) << 5)
+
+#define PM8606_VSYS_EN			(1 << 1)
+
+#define PM8606_MISC_OSC_EN		(1 << 4)
+
+enum {
+	PM8607_ID_BUCK1 = 0,
+	PM8607_ID_BUCK2,
+	PM8607_ID_BUCK3,
+
+	PM8607_ID_LDO1,
+	PM8607_ID_LDO2,
+	PM8607_ID_LDO3,
+	PM8607_ID_LDO4,
+	PM8607_ID_LDO5,
+	PM8607_ID_LDO6,
+	PM8607_ID_LDO7,
+	PM8607_ID_LDO8,
+	PM8607_ID_LDO9,
+	PM8607_ID_LDO10,
+	PM8607_ID_LDO11,
+	PM8607_ID_LDO12,
+	PM8607_ID_LDO13,
+	PM8607_ID_LDO14,
+	PM8607_ID_LDO15,
+
+	PM8607_ID_RG_MAX,
+};
+
+/* 8607 chip ID is 0x40 or 0x50 */
+#define PM8607_VERSION_MASK		(0xF0)	/* 8607 chip ID mask */
+
+/* Interrupt Registers */
+#define PM8607_STATUS_1			(0x01)
+#define PM8607_STATUS_2			(0x02)
+#define PM8607_INT_STATUS1		(0x03)
+#define PM8607_INT_STATUS2		(0x04)
+#define PM8607_INT_STATUS3		(0x05)
+#define PM8607_INT_MASK_1		(0x06)
+#define PM8607_INT_MASK_2		(0x07)
+#define PM8607_INT_MASK_3		(0x08)
+
+/* Regulator Control Registers */
+#define PM8607_LDO1			(0x10)
+#define PM8607_LDO2			(0x11)
+#define PM8607_LDO3			(0x12)
+#define PM8607_LDO4			(0x13)
+#define PM8607_LDO5			(0x14)
+#define PM8607_LDO6			(0x15)
+#define PM8607_LDO7			(0x16)
+#define PM8607_LDO8			(0x17)
+#define PM8607_LDO9			(0x18)
+#define PM8607_LDO10			(0x19)
+#define PM8607_LDO12			(0x1A)
+#define PM8607_LDO14			(0x1B)
+#define PM8607_SLEEP_MODE1		(0x1C)
+#define PM8607_SLEEP_MODE2		(0x1D)
+#define PM8607_SLEEP_MODE3		(0x1E)
+#define PM8607_SLEEP_MODE4		(0x1F)
+#define PM8607_GO			(0x20)
+#define PM8607_SLEEP_BUCK1		(0x21)
+#define PM8607_SLEEP_BUCK2		(0x22)
+#define PM8607_SLEEP_BUCK3		(0x23)
+#define PM8607_BUCK1			(0x24)
+#define PM8607_BUCK2			(0x25)
+#define PM8607_BUCK3			(0x26)
+#define PM8607_BUCK_CONTROLS		(0x27)
+#define PM8607_SUPPLIES_EN11		(0x2B)
+#define PM8607_SUPPLIES_EN12		(0x2C)
+#define PM8607_GROUP1			(0x2D)
+#define PM8607_GROUP2			(0x2E)
+#define PM8607_GROUP3			(0x2F)
+#define PM8607_GROUP4			(0x30)
+#define PM8607_GROUP5			(0x31)
+#define PM8607_GROUP6			(0x32)
+#define PM8607_SUPPLIES_EN21		(0x33)
+#define PM8607_SUPPLIES_EN22		(0x34)
+
+/* Vibrator Control Registers */
+#define PM8607_VIBRATOR_SET		(0x28)
+#define PM8607_VIBRATOR_PWM		(0x29)
+
+/* GPADC Registers */
+#define PM8607_GP_BIAS1			(0x4F)
+#define PM8607_MEAS_EN1			(0x50)
+#define PM8607_MEAS_EN2			(0x51)
+#define PM8607_MEAS_EN3			(0x52)
+#define PM8607_MEAS_OFF_TIME1		(0x53)
+#define PM8607_MEAS_OFF_TIME2		(0x54)
+#define PM8607_TSI_PREBIAS		(0x55)	/* prebias time */
+#define PM8607_PD_PREBIAS		(0x56)	/* prebias time */
+#define PM8607_GPADC_MISC1		(0x57)
+
+/* RTC Control Registers */
+#define PM8607_RTC1			(0xA0)
+#define PM8607_RTC_COUNTER1		(0xA1)
+#define PM8607_RTC_COUNTER2		(0xA2)
+#define PM8607_RTC_COUNTER3		(0xA3)
+#define PM8607_RTC_COUNTER4		(0xA4)
+#define PM8607_RTC_EXPIRE1		(0xA5)
+#define PM8607_RTC_EXPIRE2		(0xA6)
+#define PM8607_RTC_EXPIRE3		(0xA7)
+#define PM8607_RTC_EXPIRE4		(0xA8)
+#define PM8607_RTC_TRIM1		(0xA9)
+#define PM8607_RTC_TRIM2		(0xAA)
+#define PM8607_RTC_TRIM3		(0xAB)
+#define PM8607_RTC_TRIM4		(0xAC)
+#define PM8607_RTC_MISC1		(0xAD)
+#define PM8607_RTC_MISC2		(0xAE)
+#define PM8607_RTC_MISC3		(0xAF)
+
+/* Misc Registers */
+#define PM8607_CHIP_ID			(0x00)
+#define PM8607_B0_MISC1			(0x0C)
+#define PM8607_LDO1			(0x10)
+#define PM8607_DVC3			(0x26)
+#define PM8607_A1_MISC1			(0x40)
+
+/* bit definitions of Status Query Interface */
+#define PM8607_STATUS_CC		(1 << 3)
+#define PM8607_STATUS_PEN		(1 << 4)
+#define PM8607_STATUS_HEADSET		(1 << 5)
+#define PM8607_STATUS_HOOK		(1 << 6)
+#define PM8607_STATUS_MICIN		(1 << 7)
+#define PM8607_STATUS_ONKEY		(1 << 8)
+#define PM8607_STATUS_EXTON		(1 << 9)
+#define PM8607_STATUS_CHG		(1 << 10)
+#define PM8607_STATUS_BAT		(1 << 11)
+#define PM8607_STATUS_VBUS		(1 << 12)
+#define PM8607_STATUS_OV		(1 << 13)
+
+/* bit definitions of BUCK3 */
+#define PM8607_BUCK3_DOUBLE		(1 << 6)
+
+/* bit definitions of Misc1 */
+#define PM8607_A1_MISC1_PI2C		(1 << 0)
+#define PM8607_B0_MISC1_INV_INT		(1 << 0)
+#define PM8607_B0_MISC1_INT_CLEAR	(1 << 1)
+#define PM8607_B0_MISC1_INT_MASK	(1 << 2)
+#define PM8607_B0_MISC1_PI2C		(1 << 3)
+#define PM8607_B0_MISC1_RESET		(1 << 6)
+
+/* bits definitions of GPADC */
+#define PM8607_GPADC_EN			(1 << 0)
+#define PM8607_GPADC_PREBIAS_MASK	(3 << 1)
+#define PM8607_GPADC_SLOT_CYCLE_MASK	(3 << 3)	/* slow mode */
+#define PM8607_GPADC_OFF_SCALE_MASK	(3 << 5)	/* GP sleep mode */
+#define PM8607_GPADC_SW_CAL_MASK	(1 << 7)
+
+#define PM8607_PD_PREBIAS_MASK		(0x1F << 0)
+#define PM8607_PD_PRECHG_MASK		(7 << 5)
+
+#define PM8606_REF_GP_OSC_OFF         0
+#define PM8606_REF_GP_OSC_ON          1
+#define PM8606_REF_GP_OSC_UNKNOWN     2
+
+/* Clients of reference group and 8MHz oscillator in 88PM8606 */
+enum pm8606_ref_gp_and_osc_clients {
+	REF_GP_NO_CLIENTS       = 0,
+	WLED1_DUTY              = (1<<0), /*PF 0x02.7:0*/
+	WLED2_DUTY              = (1<<1), /*PF 0x04.7:0*/
+	WLED3_DUTY              = (1<<2), /*PF 0x06.7:0*/
+	RGB1_ENABLE             = (1<<3), /*PF 0x07.1*/
+	RGB2_ENABLE             = (1<<4), /*PF 0x07.2*/
+	LDO_VBR_EN              = (1<<5), /*PF 0x12.0*/
+	REF_GP_MAX_CLIENT       = 0xFFFF
+};
+
+/* Interrupt Number in 88PM8607 */
+enum {
+	PM8607_IRQ_ONKEY,
+	PM8607_IRQ_EXTON,
+	PM8607_IRQ_CHG,
+	PM8607_IRQ_BAT,
+	PM8607_IRQ_RTC,
+	PM8607_IRQ_CC,
+	PM8607_IRQ_VBAT,
+	PM8607_IRQ_VCHG,
+	PM8607_IRQ_VSYS,
+	PM8607_IRQ_TINT,
+	PM8607_IRQ_GPADC0,
+	PM8607_IRQ_GPADC1,
+	PM8607_IRQ_GPADC2,
+	PM8607_IRQ_GPADC3,
+	PM8607_IRQ_AUDIO_SHORT,
+	PM8607_IRQ_PEN,
+	PM8607_IRQ_HEADSET,
+	PM8607_IRQ_HOOK,
+	PM8607_IRQ_MICIN,
+	PM8607_IRQ_CHG_FAIL,
+	PM8607_IRQ_CHG_DONE,
+	PM8607_IRQ_CHG_FAULT,
+};
+
+enum {
+	PM8607_CHIP_A0 = 0x40,
+	PM8607_CHIP_A1 = 0x41,
+	PM8607_CHIP_B0 = 0x48,
+};
+
+struct pm860x_chip {
+	struct device		*dev;
+	struct mutex		irq_lock;
+	struct mutex		osc_lock;
+	struct i2c_client	*client;
+	struct i2c_client	*companion;	/* companion chip client */
+	struct regmap           *regmap;
+	struct regmap           *regmap_companion;
+
+	int			buck3_double;	/* DVC ramp slope double */
+	unsigned short		companion_addr;
+	unsigned short		osc_vote;
+	int			id;
+	int			irq_mode;
+	int			irq_base;
+	int			core_irq;
+	unsigned char		chip_version;
+	unsigned char		osc_status;
+
+	unsigned int            wakeup_flag;
+};
+
+enum {
+	GI2C_PORT = 0,
+	PI2C_PORT,
+};
+
+struct pm860x_backlight_pdata {
+	int		id;
+	int		pwm;
+	int		iset;
+	unsigned long	flags;
+};
+
+struct pm860x_led_pdata {
+	int		id;
+	int		iset;
+	unsigned long	flags;
+};
+
+struct pm860x_rtc_pdata {
+	int		(*sync)(unsigned int ticks);
+	int		vrtc;
+};
+
+struct pm860x_touch_pdata {
+	int		gpadc_prebias;
+	int		slot_cycle;
+	int		off_scale;
+	int		sw_cal;
+	int		tsi_prebias;	/* time, slot */
+	int		pen_prebias;	/* time, slot */
+	int		pen_prechg;	/* time, slot */
+	int		res_x;		/* resistor of Xplate */
+	unsigned long	flags;
+};
+
+struct pm860x_power_pdata {
+	unsigned	fast_charge;	/* charge current */
+};
+
+struct pm860x_platform_data {
+	struct pm860x_backlight_pdata	*backlight;
+	struct pm860x_led_pdata		*led;
+	struct pm860x_rtc_pdata		*rtc;
+	struct pm860x_touch_pdata	*touch;
+	struct pm860x_power_pdata	*power;
+	struct regulator_init_data	*regulator;
+
+	unsigned short	companion_addr;	/* I2C address of companion chip */
+	int		i2c_port;	/* Controlled by GI2C or PI2C */
+	int		irq_mode;	/* Clear interrupt by read/write(0/1) */
+	int		irq_base;	/* IRQ base number of 88pm860x */
+	int		num_leds;
+	int		num_backlights;
+	int		num_regulators;
+};
+
+extern int pm8606_osc_enable(struct pm860x_chip *, unsigned short);
+extern int pm8606_osc_disable(struct pm860x_chip *, unsigned short);
+
+extern int pm860x_reg_read(struct i2c_client *, int);
+extern int pm860x_reg_write(struct i2c_client *, int, unsigned char);
+extern int pm860x_bulk_read(struct i2c_client *, int, int, unsigned char *);
+extern int pm860x_bulk_write(struct i2c_client *, int, int, unsigned char *);
+extern int pm860x_set_bits(struct i2c_client *, int, unsigned char,
+			   unsigned char);
+extern int pm860x_page_reg_read(struct i2c_client *, int);
+extern int pm860x_page_reg_write(struct i2c_client *, int, unsigned char);
+extern int pm860x_page_bulk_read(struct i2c_client *, int, int,
+				 unsigned char *);
+extern int pm860x_page_bulk_write(struct i2c_client *, int, int,
+				  unsigned char *);
+extern int pm860x_page_set_bits(struct i2c_client *, int, unsigned char,
+				unsigned char);
+
+extern int pm860x_device_init(struct pm860x_chip *chip,
+			      struct pm860x_platform_data *pdata) __devinit ;
+extern void pm860x_device_exit(struct pm860x_chip *chip) __devexit ;
+
+#endif /* __LINUX_MFD_88PM860X_H */
diff --git a/include/linux/mfd/aat2870.h b/include/linux/mfd/aat2870.h
new file mode 100644
index 00000000..f7316c29
--- /dev/null
+++ b/include/linux/mfd/aat2870.h
@@ -0,0 +1,181 @@
+/*
+ * linux/include/linux/mfd/aat2870.h
+ *
+ * Copyright (c) 2011, NVIDIA Corporation.
+ * Author: Jin Park <jinyoungp@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __LINUX_MFD_AAT2870_H
+#define __LINUX_MFD_AAT2870_H
+
+#include <linux/debugfs.h>
+#include <linux/i2c.h>
+
+/* Register offsets */
+#define AAT2870_BL_CH_EN	0x00
+#define AAT2870_BLM		0x01
+#define AAT2870_BLS		0x02
+#define AAT2870_BL1		0x03
+#define AAT2870_BL2		0x04
+#define AAT2870_BL3		0x05
+#define AAT2870_BL4		0x06
+#define AAT2870_BL5		0x07
+#define AAT2870_BL6		0x08
+#define AAT2870_BL7		0x09
+#define AAT2870_BL8		0x0A
+#define AAT2870_FLR		0x0B
+#define AAT2870_FM		0x0C
+#define AAT2870_FS		0x0D
+#define AAT2870_ALS_CFG0	0x0E
+#define AAT2870_ALS_CFG1	0x0F
+#define AAT2870_ALS_CFG2	0x10
+#define AAT2870_AMB		0x11
+#define AAT2870_ALS0		0x12
+#define AAT2870_ALS1		0x13
+#define AAT2870_ALS2		0x14
+#define AAT2870_ALS3		0x15
+#define AAT2870_ALS4		0x16
+#define AAT2870_ALS5		0x17
+#define AAT2870_ALS6		0x18
+#define AAT2870_ALS7		0x19
+#define AAT2870_ALS8		0x1A
+#define AAT2870_ALS9		0x1B
+#define AAT2870_ALSA		0x1C
+#define AAT2870_ALSB		0x1D
+#define AAT2870_ALSC		0x1E
+#define AAT2870_ALSD		0x1F
+#define AAT2870_ALSE		0x20
+#define AAT2870_ALSF		0x21
+#define AAT2870_SUB_SET		0x22
+#define AAT2870_SUB_CTRL	0x23
+#define AAT2870_LDO_AB		0x24
+#define AAT2870_LDO_CD		0x25
+#define AAT2870_LDO_EN		0x26
+#define AAT2870_REG_NUM		0x27
+
+/* Device IDs */
+enum aat2870_id {
+	AAT2870_ID_BL,
+	AAT2870_ID_LDOA,
+	AAT2870_ID_LDOB,
+	AAT2870_ID_LDOC,
+	AAT2870_ID_LDOD
+};
+
+/* Backlight channels */
+#define AAT2870_BL_CH1		0x01
+#define AAT2870_BL_CH2		0x02
+#define AAT2870_BL_CH3		0x04
+#define AAT2870_BL_CH4		0x08
+#define AAT2870_BL_CH5		0x10
+#define AAT2870_BL_CH6		0x20
+#define AAT2870_BL_CH7		0x40
+#define AAT2870_BL_CH8		0x80
+#define AAT2870_BL_CH_ALL	0xFF
+
+/* Backlight current magnitude (mA) */
+enum aat2870_current {
+	AAT2870_CURRENT_0_45 = 1,
+	AAT2870_CURRENT_0_90,
+	AAT2870_CURRENT_1_80,
+	AAT2870_CURRENT_2_70,
+	AAT2870_CURRENT_3_60,
+	AAT2870_CURRENT_4_50,
+	AAT2870_CURRENT_5_40,
+	AAT2870_CURRENT_6_30,
+	AAT2870_CURRENT_7_20,
+	AAT2870_CURRENT_8_10,
+	AAT2870_CURRENT_9_00,
+	AAT2870_CURRENT_9_90,
+	AAT2870_CURRENT_10_8,
+	AAT2870_CURRENT_11_7,
+	AAT2870_CURRENT_12_6,
+	AAT2870_CURRENT_13_5,
+	AAT2870_CURRENT_14_4,
+	AAT2870_CURRENT_15_3,
+	AAT2870_CURRENT_16_2,
+	AAT2870_CURRENT_17_1,
+	AAT2870_CURRENT_18_0,
+	AAT2870_CURRENT_18_9,
+	AAT2870_CURRENT_19_8,
+	AAT2870_CURRENT_20_7,
+	AAT2870_CURRENT_21_6,
+	AAT2870_CURRENT_22_5,
+	AAT2870_CURRENT_23_4,
+	AAT2870_CURRENT_24_3,
+	AAT2870_CURRENT_25_2,
+	AAT2870_CURRENT_26_1,
+	AAT2870_CURRENT_27_0,
+	AAT2870_CURRENT_27_9
+};
+
+struct aat2870_register {
+	bool readable;
+	bool writeable;
+	u8 value;
+};
+
+struct aat2870_data {
+	struct device *dev;
+	struct i2c_client *client;
+
+	struct mutex io_lock;
+	struct aat2870_register *reg_cache; /* register cache */
+	int en_pin; /* enable GPIO pin (if < 0, ignore this value) */
+	bool is_enable;
+
+	/* init and uninit for platform specified */
+	int (*init)(struct aat2870_data *aat2870);
+	void (*uninit)(struct aat2870_data *aat2870);
+
+	/* i2c io funcntions */
+	int (*read)(struct aat2870_data *aat2870, u8 addr, u8 *val);
+	int (*write)(struct aat2870_data *aat2870, u8 addr, u8 val);
+	int (*update)(struct aat2870_data *aat2870, u8 addr, u8 mask, u8 val);
+
+	/* for debugfs */
+	struct dentry *dentry_root;
+	struct dentry *dentry_reg;
+};
+
+struct aat2870_subdev_info {
+	int id;
+	const char *name;
+	void *platform_data;
+};
+
+struct aat2870_platform_data {
+	int en_pin; /* enable GPIO pin (if < 0, ignore this value) */
+
+	struct aat2870_subdev_info *subdevs;
+	int num_subdevs;
+
+	/* init and uninit for platform specified */
+	int (*init)(struct aat2870_data *aat2870);
+	void (*uninit)(struct aat2870_data *aat2870);
+};
+
+struct aat2870_bl_platform_data {
+	/* backlight channels, default is AAT2870_BL_CH_ALL */
+	int channels;
+	/* backlight current magnitude, default is AAT2870_CURRENT_27_9 */
+	int max_current;
+	/* maximum brightness, default is 255 */
+	int max_brightness;
+};
+
+#endif /* __LINUX_MFD_AAT2870_H */
diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
new file mode 100644
index 00000000..ee96cd51
--- /dev/null
+++ b/include/linux/mfd/abx500.h
@@ -0,0 +1,461 @@
+/*
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * AB3100 core access functions
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ * ABX500 core access functions.
+ * The abx500 interface is used for the Analog Baseband chip
+ * ab3100, ab5500, and ab8500.
+ *
+ * Author: Mattias Wallin <mattias.wallin@stericsson.com>
+ * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
+ * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ */
+
+#include <linux/regulator/machine.h>
+
+struct device;
+
+#ifndef MFD_ABX500_H
+#define MFD_ABX500_H
+
+#define AB3100_P1A	0xc0
+#define AB3100_P1B	0xc1
+#define AB3100_P1C	0xc2
+#define AB3100_P1D	0xc3
+#define AB3100_P1E	0xc4
+#define AB3100_P1F	0xc5
+#define AB3100_P1G	0xc6
+#define AB3100_R2A	0xc7
+#define AB3100_R2B	0xc8
+#define AB5500_1_0	0x20
+#define AB5500_1_1	0x21
+#define AB5500_2_0	0x24
+
+/*
+ * AB3100, EVENTA1, A2 and A3 event register flags
+ * these are catenated into a single 32-bit flag in the code
+ * for event notification broadcasts.
+ */
+#define AB3100_EVENTA1_ONSWA				(0x01<<16)
+#define AB3100_EVENTA1_ONSWB				(0x02<<16)
+#define AB3100_EVENTA1_ONSWC				(0x04<<16)
+#define AB3100_EVENTA1_DCIO				(0x08<<16)
+#define AB3100_EVENTA1_OVER_TEMP			(0x10<<16)
+#define AB3100_EVENTA1_SIM_OFF				(0x20<<16)
+#define AB3100_EVENTA1_VBUS				(0x40<<16)
+#define AB3100_EVENTA1_VSET_USB				(0x80<<16)
+
+#define AB3100_EVENTA2_READY_TX				(0x01<<8)
+#define AB3100_EVENTA2_READY_RX				(0x02<<8)
+#define AB3100_EVENTA2_OVERRUN_ERROR			(0x04<<8)
+#define AB3100_EVENTA2_FRAMING_ERROR			(0x08<<8)
+#define AB3100_EVENTA2_CHARG_OVERCURRENT		(0x10<<8)
+#define AB3100_EVENTA2_MIDR				(0x20<<8)
+#define AB3100_EVENTA2_BATTERY_REM			(0x40<<8)
+#define AB3100_EVENTA2_ALARM				(0x80<<8)
+
+#define AB3100_EVENTA3_ADC_TRIG5			(0x01)
+#define AB3100_EVENTA3_ADC_TRIG4			(0x02)
+#define AB3100_EVENTA3_ADC_TRIG3			(0x04)
+#define AB3100_EVENTA3_ADC_TRIG2			(0x08)
+#define AB3100_EVENTA3_ADC_TRIGVBAT			(0x10)
+#define AB3100_EVENTA3_ADC_TRIGVTX			(0x20)
+#define AB3100_EVENTA3_ADC_TRIG1			(0x40)
+#define AB3100_EVENTA3_ADC_TRIG0			(0x80)
+
+/* AB3100, STR register flags */
+#define AB3100_STR_ONSWA				(0x01)
+#define AB3100_STR_ONSWB				(0x02)
+#define AB3100_STR_ONSWC				(0x04)
+#define AB3100_STR_DCIO					(0x08)
+#define AB3100_STR_BOOT_MODE				(0x10)
+#define AB3100_STR_SIM_OFF				(0x20)
+#define AB3100_STR_BATT_REMOVAL				(0x40)
+#define AB3100_STR_VBUS					(0x80)
+
+/*
+ * AB3100 contains 8 regulators, one external regulator controller
+ * and a buck converter, further the LDO E and buck converter can
+ * have separate settings if they are in sleep mode, this is
+ * modeled as a separate regulator.
+ */
+#define AB3100_NUM_REGULATORS				10
+
+/**
+ * struct ab3100
+ * @access_mutex: lock out concurrent accesses to the AB3100 registers
+ * @dev: pointer to the containing device
+ * @i2c_client: I2C client for this chip
+ * @testreg_client: secondary client for test registers
+ * @chip_name: name of this chip variant
+ * @chip_id: 8 bit chip ID for this chip variant
+ * @event_subscribers: event subscribers are listed here
+ * @startup_events: a copy of the first reading of the event registers
+ * @startup_events_read: whether the first events have been read
+ *
+ * This struct is PRIVATE and devices using it should NOT
+ * access ANY fields. It is used as a token for calling the
+ * AB3100 functions.
+ */
+struct ab3100 {
+	struct mutex access_mutex;
+	struct device *dev;
+	struct i2c_client *i2c_client;
+	struct i2c_client *testreg_client;
+	char chip_name[32];
+	u8 chip_id;
+	struct blocking_notifier_head event_subscribers;
+	u8 startup_events[3];
+	bool startup_events_read;
+};
+
+/**
+ * struct ab3100_platform_data
+ * Data supplied to initialize board connections to the AB3100
+ * @reg_constraints: regulator constraints for target board
+ *     the order of these constraints are: LDO A, C, D, E,
+ *     F, G, H, K, EXT and BUCK.
+ * @reg_initvals: initial values for the regulator registers
+ *     plus two sleep settings for LDO E and the BUCK converter.
+ *     exactly AB3100_NUM_REGULATORS+2 values must be sent in.
+ *     Order: LDO A, C, E, E sleep, F, G, H, K, EXT, BUCK,
+ *     BUCK sleep, LDO D. (LDO D need to be initialized last.)
+ * @external_voltage: voltage level of the external regulator.
+ */
+struct ab3100_platform_data {
+	struct regulator_init_data reg_constraints[AB3100_NUM_REGULATORS];
+	u8 reg_initvals[AB3100_NUM_REGULATORS+2];
+	int external_voltage;
+};
+
+int ab3100_event_register(struct ab3100 *ab3100,
+			  struct notifier_block *nb);
+int ab3100_event_unregister(struct ab3100 *ab3100,
+			    struct notifier_block *nb);
+
+/**
+ * struct abx500_init_setting
+ * Initial value of the registers for driver to use during setup.
+ */
+struct abx500_init_settings {
+	u8 bank;
+	u8 reg;
+	u8 setting;
+};
+
+/* Battery driver related data */
+/*
+ * ADC for the battery thermistor.
+ * When using the ABx500_ADC_THERM_BATCTRL the battery ID resistor is combined
+ * with a NTC resistor to both identify the battery and to measure its
+ * temperature. Different phone manufactures uses different techniques to both
+ * identify the battery and to read its temperature.
+ */
+enum abx500_adc_therm {
+	ABx500_ADC_THERM_BATCTRL,
+	ABx500_ADC_THERM_BATTEMP,
+};
+
+/**
+ * struct abx500_res_to_temp - defines one point in a temp to res curve. To
+ * be used in battery packs that combines the identification resistor with a
+ * NTC resistor.
+ * @temp:			battery pack temperature in Celcius
+ * @resist:			NTC resistor net total resistance
+ */
+struct abx500_res_to_temp {
+	int temp;
+	int resist;
+};
+
+/**
+ * struct abx500_v_to_cap - Table for translating voltage to capacity
+ * @voltage:		Voltage in mV
+ * @capacity:		Capacity in percent
+ */
+struct abx500_v_to_cap {
+	int voltage;
+	int capacity;
+};
+
+/* Forward declaration */
+struct abx500_fg;
+
+/**
+ * struct abx500_fg_parameters - Fuel gauge algorithm parameters, in seconds
+ * if not specified
+ * @recovery_sleep_timer:	Time between measurements while recovering
+ * @recovery_total_time:	Total recovery time
+ * @init_timer:			Measurement interval during startup
+ * @init_discard_time:		Time we discard voltage measurement at startup
+ * @init_total_time:		Total init time during startup
+ * @high_curr_time:		Time current has to be high to go to recovery
+ * @accu_charging:		FG accumulation time while charging
+ * @accu_high_curr:		FG accumulation time in high current mode
+ * @high_curr_threshold:	High current threshold, in mA
+ * @lowbat_threshold:		Low battery threshold, in mV
+ * @overbat_threshold:		Over battery threshold, in mV
+ * @battok_falling_th_sel0	Threshold in mV for battOk signal sel0
+ *				Resolution in 50 mV step.
+ * @battok_raising_th_sel1	Threshold in mV for battOk signal sel1
+ *				Resolution in 50 mV step.
+ * @user_cap_limit		Capacity reported from user must be within this
+ *				limit to be considered as sane, in percentage
+ *				points.
+ * @maint_thres			This is the threshold where we stop reporting
+ *				battery full while in maintenance, in per cent
+ */
+struct abx500_fg_parameters {
+	int recovery_sleep_timer;
+	int recovery_total_time;
+	int init_timer;
+	int init_discard_time;
+	int init_total_time;
+	int high_curr_time;
+	int accu_charging;
+	int accu_high_curr;
+	int high_curr_threshold;
+	int lowbat_threshold;
+	int overbat_threshold;
+	int battok_falling_th_sel0;
+	int battok_raising_th_sel1;
+	int user_cap_limit;
+	int maint_thres;
+};
+
+/**
+ * struct abx500_charger_maximization - struct used by the board config.
+ * @use_maxi:		Enable maximization for this battery type
+ * @maxi_chg_curr:	Maximum charger current allowed
+ * @maxi_wait_cycles:	cycles to wait before setting charger current
+ * @charger_curr_step	delta between two charger current settings (mA)
+ */
+struct abx500_maxim_parameters {
+	bool ena_maxi;
+	int chg_curr;
+	int wait_cycles;
+	int charger_curr_step;
+};
+
+/**
+ * struct abx500_battery_type - different batteries supported
+ * @name:			battery technology
+ * @resis_high:			battery upper resistance limit
+ * @resis_low:			battery lower resistance limit
+ * @charge_full_design:		Maximum battery capacity in mAh
+ * @nominal_voltage:		Nominal voltage of the battery in mV
+ * @termination_vol:		max voltage upto which battery can be charged
+ * @termination_curr		battery charging termination current in mA
+ * @recharge_vol		battery voltage limit that will trigger a new
+ *				full charging cycle in the case where maintenan-
+ *				-ce charging has been disabled
+ * @normal_cur_lvl:		charger current in normal state in mA
+ * @normal_vol_lvl:		charger voltage in normal state in mV
+ * @maint_a_cur_lvl:		charger current in maintenance A state in mA
+ * @maint_a_vol_lvl:		charger voltage in maintenance A state in mV
+ * @maint_a_chg_timer_h:	charge time in maintenance A state
+ * @maint_b_cur_lvl:		charger current in maintenance B state in mA
+ * @maint_b_vol_lvl:		charger voltage in maintenance B state in mV
+ * @maint_b_chg_timer_h:	charge time in maintenance B state
+ * @low_high_cur_lvl:		charger current in temp low/high state in mA
+ * @low_high_vol_lvl:		charger voltage in temp low/high state in mV'
+ * @battery_resistance:		battery inner resistance in mOhm.
+ * @n_r_t_tbl_elements:		number of elements in r_to_t_tbl
+ * @r_to_t_tbl:			table containing resistance to temp points
+ * @n_v_cap_tbl_elements:	number of elements in v_to_cap_tbl
+ * @v_to_cap_tbl:		Voltage to capacity (in %) table
+ * @n_batres_tbl_elements	number of elements in the batres_tbl
+ * @batres_tbl			battery internal resistance vs temperature table
+ */
+struct abx500_battery_type {
+	int name;
+	int resis_high;
+	int resis_low;
+	int charge_full_design;
+	int nominal_voltage;
+	int termination_vol;
+	int termination_curr;
+	int recharge_vol;
+	int normal_cur_lvl;
+	int normal_vol_lvl;
+	int maint_a_cur_lvl;
+	int maint_a_vol_lvl;
+	int maint_a_chg_timer_h;
+	int maint_b_cur_lvl;
+	int maint_b_vol_lvl;
+	int maint_b_chg_timer_h;
+	int low_high_cur_lvl;
+	int low_high_vol_lvl;
+	int battery_resistance;
+	int n_temp_tbl_elements;
+	struct abx500_res_to_temp *r_to_t_tbl;
+	int n_v_cap_tbl_elements;
+	struct abx500_v_to_cap *v_to_cap_tbl;
+	int n_batres_tbl_elements;
+	struct batres_vs_temp *batres_tbl;
+};
+
+/**
+ * struct abx500_bm_capacity_levels - abx500 capacity level data
+ * @critical:		critical capacity level in percent
+ * @low:		low capacity level in percent
+ * @normal:		normal capacity level in percent
+ * @high:		high capacity level in percent
+ * @full:		full capacity level in percent
+ */
+struct abx500_bm_capacity_levels {
+	int critical;
+	int low;
+	int normal;
+	int high;
+	int full;
+};
+
+/**
+ * struct abx500_bm_charger_parameters - Charger specific parameters
+ * @usb_volt_max:	maximum allowed USB charger voltage in mV
+ * @usb_curr_max:	maximum allowed USB charger current in mA
+ * @ac_volt_max:	maximum allowed AC charger voltage in mV
+ * @ac_curr_max:	maximum allowed AC charger current in mA
+ */
+struct abx500_bm_charger_parameters {
+	int usb_volt_max;
+	int usb_curr_max;
+	int ac_volt_max;
+	int ac_curr_max;
+};
+
+/**
+ * struct abx500_bm_data - abx500 battery management data
+ * @temp_under		under this temp, charging is stopped
+ * @temp_low		between this temp and temp_under charging is reduced
+ * @temp_high		between this temp and temp_over charging is reduced
+ * @temp_over		over this temp, charging is stopped
+ * @temp_now		present battery temperature
+ * @temp_interval_chg	temperature measurement interval in s when charging
+ * @temp_interval_nochg	temperature measurement interval in s when not charging
+ * @main_safety_tmr_h	safety timer for main charger
+ * @usb_safety_tmr_h	safety timer for usb charger
+ * @bkup_bat_v		voltage which we charge the backup battery with
+ * @bkup_bat_i		current which we charge the backup battery with
+ * @no_maintenance	indicates that maintenance charging is disabled
+ * @abx500_adc_therm	placement of thermistor, batctrl or battemp adc
+ * @chg_unknown_bat	flag to enable charging of unknown batteries
+ * @enable_overshoot	flag to enable VBAT overshoot control
+ * @auto_trig		flag to enable auto adc trigger
+ * @fg_res		resistance of FG resistor in 0.1mOhm
+ * @n_btypes		number of elements in array bat_type
+ * @batt_id		index of the identified battery in array bat_type
+ * @interval_charging	charge alg cycle period time when charging (sec)
+ * @interval_not_charging charge alg cycle period time when not charging (sec)
+ * @temp_hysteresis	temperature hysteresis
+ * @gnd_lift_resistance	Battery ground to phone ground resistance (mOhm)
+ * @maxi:		maximization parameters
+ * @cap_levels		capacity in percent for the different capacity levels
+ * @bat_type		table of supported battery types
+ * @chg_params		charger parameters
+ * @fg_params		fuel gauge parameters
+ */
+struct abx500_bm_data {
+	int temp_under;
+	int temp_low;
+	int temp_high;
+	int temp_over;
+	int temp_now;
+	int temp_interval_chg;
+	int temp_interval_nochg;
+	int main_safety_tmr_h;
+	int usb_safety_tmr_h;
+	int bkup_bat_v;
+	int bkup_bat_i;
+	bool no_maintenance;
+	bool chg_unknown_bat;
+	bool enable_overshoot;
+	bool auto_trig;
+	enum abx500_adc_therm adc_therm;
+	int fg_res;
+	int n_btypes;
+	int batt_id;
+	int interval_charging;
+	int interval_not_charging;
+	int temp_hysteresis;
+	int gnd_lift_resistance;
+	const struct abx500_maxim_parameters *maxi;
+	const struct abx500_bm_capacity_levels *cap_levels;
+	const struct abx500_battery_type *bat_type;
+	const struct abx500_bm_charger_parameters *chg_params;
+	const struct abx500_fg_parameters *fg_params;
+};
+
+struct abx500_chargalg_platform_data {
+	char **supplied_to;
+	size_t num_supplicants;
+};
+
+struct abx500_charger_platform_data {
+	char **supplied_to;
+	size_t num_supplicants;
+	bool autopower_cfg;
+};
+
+struct abx500_btemp_platform_data {
+	char **supplied_to;
+	size_t num_supplicants;
+};
+
+struct abx500_fg_platform_data {
+	char **supplied_to;
+	size_t num_supplicants;
+};
+
+struct abx500_bm_plat_data {
+	struct abx500_bm_data *battery;
+	struct abx500_charger_platform_data *charger;
+	struct abx500_btemp_platform_data *btemp;
+	struct abx500_fg_platform_data *fg;
+	struct abx500_chargalg_platform_data *chargalg;
+};
+
+int abx500_set_register_interruptible(struct device *dev, u8 bank, u8 reg,
+	u8 value);
+int abx500_get_register_interruptible(struct device *dev, u8 bank, u8 reg,
+	u8 *value);
+int abx500_get_register_page_interruptible(struct device *dev, u8 bank,
+	u8 first_reg, u8 *regvals, u8 numregs);
+int abx500_set_register_page_interruptible(struct device *dev, u8 bank,
+	u8 first_reg, u8 *regvals, u8 numregs);
+/**
+ * abx500_mask_and_set_register_inerruptible() - Modifies selected bits of a
+ *	target register
+ *
+ * @dev: The AB sub device.
+ * @bank: The i2c bank number.
+ * @bitmask: The bit mask to use.
+ * @bitvalues: The new bit values.
+ *
+ * Updates the value of an AB register:
+ * value -> ((value & ~bitmask) | (bitvalues & bitmask))
+ */
+int abx500_mask_and_set_register_interruptible(struct device *dev, u8 bank,
+	u8 reg, u8 bitmask, u8 bitvalues);
+int abx500_get_chip_id(struct device *dev);
+int abx500_event_registers_startup_state_get(struct device *dev, u8 *event);
+int abx500_startup_irq_enabled(struct device *dev, unsigned int irq);
+
+struct abx500_ops {
+	int (*get_chip_id) (struct device *);
+	int (*get_register) (struct device *, u8, u8, u8 *);
+	int (*set_register) (struct device *, u8, u8, u8);
+	int (*get_register_page) (struct device *, u8, u8, u8 *, u8);
+	int (*set_register_page) (struct device *, u8, u8, u8 *, u8);
+	int (*mask_and_set_register) (struct device *, u8, u8, u8, u8);
+	int (*event_registers_startup_state_get) (struct device *, u8 *);
+	int (*startup_irq_enabled) (struct device *, unsigned int);
+};
+
+int abx500_register_ops(struct device *core_dev, struct abx500_ops *ops);
+void abx500_remove_ops(struct device *dev);
+#endif
diff --git a/include/linux/mfd/abx500/ab5500.h b/include/linux/mfd/abx500/ab5500.h
new file mode 100644
index 00000000..54f820ed
--- /dev/null
+++ b/include/linux/mfd/abx500/ab5500.h
@@ -0,0 +1,140 @@
+/*
+ * Copyright (C) ST-Ericsson 2011
+ *
+ * License Terms: GNU General Public License v2
+ */
+#ifndef MFD_AB5500_H
+#define MFD_AB5500_H
+
+struct device;
+
+enum ab5500_devid {
+	AB5500_DEVID_ADC,
+	AB5500_DEVID_LEDS,
+	AB5500_DEVID_POWER,
+	AB5500_DEVID_REGULATORS,
+	AB5500_DEVID_SIM,
+	AB5500_DEVID_RTC,
+	AB5500_DEVID_CHARGER,
+	AB5500_DEVID_FUELGAUGE,
+	AB5500_DEVID_VIBRATOR,
+	AB5500_DEVID_CODEC,
+	AB5500_DEVID_USB,
+	AB5500_DEVID_OTP,
+	AB5500_DEVID_VIDEO,
+	AB5500_DEVID_DBIECI,
+	AB5500_DEVID_ONSWA,
+	AB5500_NUM_DEVICES,
+};
+
+enum ab5500_banks {
+	AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP = 0,
+	AB5500_BANK_VDDDIG_IO_I2C_CLK_TST = 1,
+	AB5500_BANK_VDENC = 2,
+	AB5500_BANK_SIM_USBSIM  = 3,
+	AB5500_BANK_LED = 4,
+	AB5500_BANK_ADC  = 5,
+	AB5500_BANK_RTC  = 6,
+	AB5500_BANK_STARTUP  = 7,
+	AB5500_BANK_DBI_ECI  = 8,
+	AB5500_BANK_CHG  = 9,
+	AB5500_BANK_FG_BATTCOM_ACC = 10,
+	AB5500_BANK_USB = 11,
+	AB5500_BANK_IT = 12,
+	AB5500_BANK_VIBRA = 13,
+	AB5500_BANK_AUDIO_HEADSETUSB = 14,
+	AB5500_NUM_BANKS = 15,
+};
+
+enum ab5500_banks_addr {
+	AB5500_ADDR_VIT_IO_I2C_CLK_TST_OTP = 0x4A,
+	AB5500_ADDR_VDDDIG_IO_I2C_CLK_TST = 0x4B,
+	AB5500_ADDR_VDENC = 0x06,
+	AB5500_ADDR_SIM_USBSIM  = 0x04,
+	AB5500_ADDR_LED = 0x10,
+	AB5500_ADDR_ADC  = 0x0A,
+	AB5500_ADDR_RTC  = 0x0F,
+	AB5500_ADDR_STARTUP  = 0x03,
+	AB5500_ADDR_DBI_ECI  = 0x07,
+	AB5500_ADDR_CHG  = 0x0B,
+	AB5500_ADDR_FG_BATTCOM_ACC = 0x0C,
+	AB5500_ADDR_USB = 0x05,
+	AB5500_ADDR_IT = 0x0E,
+	AB5500_ADDR_VIBRA = 0x02,
+	AB5500_ADDR_AUDIO_HEADSETUSB = 0x0D,
+};
+
+/*
+ * Interrupt register offsets
+ * Bank : 0x0E
+ */
+#define AB5500_IT_SOURCE0_REG		0x20
+#define AB5500_IT_SOURCE1_REG		0x21
+#define AB5500_IT_SOURCE2_REG		0x22
+#define AB5500_IT_SOURCE3_REG		0x23
+#define AB5500_IT_SOURCE4_REG		0x24
+#define AB5500_IT_SOURCE5_REG		0x25
+#define AB5500_IT_SOURCE6_REG		0x26
+#define AB5500_IT_SOURCE7_REG		0x27
+#define AB5500_IT_SOURCE8_REG		0x28
+#define AB5500_IT_SOURCE9_REG		0x29
+#define AB5500_IT_SOURCE10_REG		0x2A
+#define AB5500_IT_SOURCE11_REG		0x2B
+#define AB5500_IT_SOURCE12_REG		0x2C
+#define AB5500_IT_SOURCE13_REG		0x2D
+#define AB5500_IT_SOURCE14_REG		0x2E
+#define AB5500_IT_SOURCE15_REG		0x2F
+#define AB5500_IT_SOURCE16_REG		0x30
+#define AB5500_IT_SOURCE17_REG		0x31
+#define AB5500_IT_SOURCE18_REG		0x32
+#define AB5500_IT_SOURCE19_REG		0x33
+#define AB5500_IT_SOURCE20_REG		0x34
+#define AB5500_IT_SOURCE21_REG		0x35
+#define AB5500_IT_SOURCE22_REG		0x36
+#define AB5500_IT_SOURCE23_REG		0x37
+
+#define AB5500_NUM_IRQ_REGS		23
+
+/**
+ * struct ab5500
+ * @access_mutex: lock out concurrent accesses to the AB registers
+ * @dev: a pointer to the device struct for this chip driver
+ * @ab5500_irq: the analog baseband irq
+ * @irq_base: the platform configuration irq base for subdevices
+ * @chip_name: name of this chip variant
+ * @chip_id: 8 bit chip ID for this chip variant
+ * @irq_lock: a lock to protect the mask
+ * @abb_events: a local bit mask of the prcmu wakeup events
+ * @event_mask: a local copy of the mask event registers
+ * @last_event_mask: a copy of the last event_mask written to hardware
+ * @startup_events: a copy of the first reading of the event registers
+ * @startup_events_read: whether the first events have been read
+ */
+struct ab5500 {
+	struct mutex access_mutex;
+	struct device *dev;
+	unsigned int ab5500_irq;
+	unsigned int irq_base;
+	char chip_name[32];
+	u8 chip_id;
+	struct mutex irq_lock;
+	u32 abb_events;
+	u8 mask[AB5500_NUM_IRQ_REGS];
+	u8 oldmask[AB5500_NUM_IRQ_REGS];
+	u8 startup_events[AB5500_NUM_IRQ_REGS];
+	bool startup_events_read;
+#ifdef CONFIG_DEBUG_FS
+	unsigned int debug_bank;
+	unsigned int debug_address;
+#endif
+};
+
+struct ab5500_platform_data {
+	struct {unsigned int base; unsigned int count; } irq;
+	void *dev_data[AB5500_NUM_DEVICES];
+	struct abx500_init_settings *init_settings;
+	unsigned int init_settings_sz;
+	bool pm_power_off;
+};
+
+#endif /* MFD_AB5500_H */
diff --git a/include/linux/mfd/abx500/ab8500-bm.h b/include/linux/mfd/abx500/ab8500-bm.h
new file mode 100644
index 00000000..44310c98
--- /dev/null
+++ b/include/linux/mfd/abx500/ab8500-bm.h
@@ -0,0 +1,474 @@
+/*
+ * Copyright ST-Ericsson 2012.
+ *
+ * Author: Arun Murthy <arun.murthy@stericsson.com>
+ * Licensed under GPLv2.
+ */
+
+#ifndef _AB8500_BM_H
+#define _AB8500_BM_H
+
+#include <linux/kernel.h>
+#include <linux/mfd/abx500.h>
+
+/*
+ * System control 2 register offsets.
+ * bank = 0x02
+ */
+#define AB8500_MAIN_WDOG_CTRL_REG	0x01
+#define AB8500_LOW_BAT_REG		0x03
+#define AB8500_BATT_OK_REG		0x04
+/*
+ * USB/ULPI register offsets
+ * Bank : 0x5
+ */
+#define AB8500_USB_LINE_STAT_REG	0x80
+
+/*
+ * Charger / status register offfsets
+ * Bank : 0x0B
+ */
+#define AB8500_CH_STATUS1_REG		0x00
+#define AB8500_CH_STATUS2_REG		0x01
+#define AB8500_CH_USBCH_STAT1_REG	0x02
+#define AB8500_CH_USBCH_STAT2_REG	0x03
+#define AB8500_CH_FSM_STAT_REG		0x04
+#define AB8500_CH_STAT_REG		0x05
+
+/*
+ * Charger / control register offfsets
+ * Bank : 0x0B
+ */
+#define AB8500_CH_VOLT_LVL_REG		0x40
+#define AB8500_CH_VOLT_LVL_MAX_REG	0x41  /*Only in Cut2.0*/
+#define AB8500_CH_OPT_CRNTLVL_REG	0x42
+#define AB8500_CH_OPT_CRNTLVL_MAX_REG	0x43  /*Only in Cut2.0*/
+#define AB8500_CH_WD_TIMER_REG		0x50
+#define AB8500_CHARG_WD_CTRL		0x51
+#define AB8500_BTEMP_HIGH_TH		0x52
+#define AB8500_LED_INDICATOR_PWM_CTRL	0x53
+#define AB8500_LED_INDICATOR_PWM_DUTY	0x54
+#define AB8500_BATT_OVV			0x55
+#define AB8500_CHARGER_CTRL		0x56
+#define AB8500_BAT_CTRL_CURRENT_SOURCE	0x60  /*Only in Cut2.0*/
+
+/*
+ * Charger / main control register offsets
+ * Bank : 0x0B
+ */
+#define AB8500_MCH_CTRL1		0x80
+#define AB8500_MCH_CTRL2		0x81
+#define AB8500_MCH_IPT_CURLVL_REG	0x82
+#define AB8500_CH_WD_REG		0x83
+
+/*
+ * Charger / USB control register offsets
+ * Bank : 0x0B
+ */
+#define AB8500_USBCH_CTRL1_REG		0xC0
+#define AB8500_USBCH_CTRL2_REG		0xC1
+#define AB8500_USBCH_IPT_CRNTLVL_REG	0xC2
+
+/*
+ * Gas Gauge register offsets
+ * Bank : 0x0C
+ */
+#define AB8500_GASG_CC_CTRL_REG		0x00
+#define AB8500_GASG_CC_ACCU1_REG	0x01
+#define AB8500_GASG_CC_ACCU2_REG	0x02
+#define AB8500_GASG_CC_ACCU3_REG	0x03
+#define AB8500_GASG_CC_ACCU4_REG	0x04
+#define AB8500_GASG_CC_SMPL_CNTRL_REG	0x05
+#define AB8500_GASG_CC_SMPL_CNTRH_REG	0x06
+#define AB8500_GASG_CC_SMPL_CNVL_REG	0x07
+#define AB8500_GASG_CC_SMPL_CNVH_REG	0x08
+#define AB8500_GASG_CC_CNTR_AVGOFF_REG	0x09
+#define AB8500_GASG_CC_OFFSET_REG	0x0A
+#define AB8500_GASG_CC_NCOV_ACCU	0x10
+#define AB8500_GASG_CC_NCOV_ACCU_CTRL	0x11
+#define AB8500_GASG_CC_NCOV_ACCU_LOW	0x12
+#define AB8500_GASG_CC_NCOV_ACCU_MED	0x13
+#define AB8500_GASG_CC_NCOV_ACCU_HIGH	0x14
+
+/*
+ * Interrupt register offsets
+ * Bank : 0x0E
+ */
+#define AB8500_IT_SOURCE2_REG		0x01
+#define AB8500_IT_SOURCE21_REG		0x14
+
+/*
+ * RTC register offsets
+ * Bank: 0x0F
+ */
+#define AB8500_RTC_BACKUP_CHG_REG	0x0C
+#define AB8500_RTC_CC_CONF_REG		0x01
+#define AB8500_RTC_CTRL_REG		0x0B
+
+/*
+ * OTP register offsets
+ * Bank : 0x15
+ */
+#define AB8500_OTP_CONF_15		0x0E
+
+/* GPADC constants from AB8500 spec, UM0836 */
+#define ADC_RESOLUTION			1024
+#define ADC_CH_MAIN_MIN			0
+#define ADC_CH_MAIN_MAX			20030
+#define ADC_CH_VBUS_MIN			0
+#define ADC_CH_VBUS_MAX			20030
+#define ADC_CH_VBAT_MIN			2300
+#define ADC_CH_VBAT_MAX			4800
+#define ADC_CH_BKBAT_MIN		0
+#define ADC_CH_BKBAT_MAX		3200
+
+/* Main charge i/p current */
+#define MAIN_CH_IP_CUR_0P9A		0x80
+#define MAIN_CH_IP_CUR_1P0A		0x90
+#define MAIN_CH_IP_CUR_1P1A		0xA0
+#define MAIN_CH_IP_CUR_1P2A		0xB0
+#define MAIN_CH_IP_CUR_1P3A		0xC0
+#define MAIN_CH_IP_CUR_1P4A		0xD0
+#define MAIN_CH_IP_CUR_1P5A		0xE0
+
+/* ChVoltLevel */
+#define CH_VOL_LVL_3P5			0x00
+#define CH_VOL_LVL_4P0			0x14
+#define CH_VOL_LVL_4P05			0x16
+#define CH_VOL_LVL_4P1			0x1B
+#define CH_VOL_LVL_4P15			0x20
+#define CH_VOL_LVL_4P2			0x25
+#define CH_VOL_LVL_4P6			0x4D
+
+/* ChOutputCurrentLevel */
+#define CH_OP_CUR_LVL_0P1		0x00
+#define CH_OP_CUR_LVL_0P2		0x01
+#define CH_OP_CUR_LVL_0P3		0x02
+#define CH_OP_CUR_LVL_0P4		0x03
+#define CH_OP_CUR_LVL_0P5		0x04
+#define CH_OP_CUR_LVL_0P6		0x05
+#define CH_OP_CUR_LVL_0P7		0x06
+#define CH_OP_CUR_LVL_0P8		0x07
+#define CH_OP_CUR_LVL_0P9		0x08
+#define CH_OP_CUR_LVL_1P4		0x0D
+#define CH_OP_CUR_LVL_1P5		0x0E
+#define CH_OP_CUR_LVL_1P6		0x0F
+
+/* BTEMP High thermal limits */
+#define BTEMP_HIGH_TH_57_0		0x00
+#define BTEMP_HIGH_TH_52		0x01
+#define BTEMP_HIGH_TH_57_1		0x02
+#define BTEMP_HIGH_TH_62		0x03
+
+/* current is mA */
+#define USB_0P1A			100
+#define USB_0P2A			200
+#define USB_0P3A			300
+#define USB_0P4A			400
+#define USB_0P5A			500
+
+#define LOW_BAT_3P1V			0x20
+#define LOW_BAT_2P3V			0x00
+#define LOW_BAT_RESET			0x01
+#define LOW_BAT_ENABLE			0x01
+
+/* Backup battery constants */
+#define BUP_ICH_SEL_50UA		0x00
+#define BUP_ICH_SEL_150UA		0x04
+#define BUP_ICH_SEL_300UA		0x08
+#define BUP_ICH_SEL_700UA		0x0C
+
+#define BUP_VCH_SEL_2P5V		0x00
+#define BUP_VCH_SEL_2P6V		0x01
+#define BUP_VCH_SEL_2P8V		0x02
+#define BUP_VCH_SEL_3P1V		0x03
+
+/* Battery OVV constants */
+#define BATT_OVV_ENA			0x02
+#define BATT_OVV_TH_3P7			0x00
+#define BATT_OVV_TH_4P75		0x01
+
+/* A value to indicate over voltage */
+#define BATT_OVV_VALUE			4750
+
+/* VBUS OVV constants */
+#define VBUS_OVV_SELECT_MASK		0x78
+#define VBUS_OVV_SELECT_5P6V		0x00
+#define VBUS_OVV_SELECT_5P7V		0x08
+#define VBUS_OVV_SELECT_5P8V		0x10
+#define VBUS_OVV_SELECT_5P9V		0x18
+#define VBUS_OVV_SELECT_6P0V		0x20
+#define VBUS_OVV_SELECT_6P1V		0x28
+#define VBUS_OVV_SELECT_6P2V		0x30
+#define VBUS_OVV_SELECT_6P3V		0x38
+
+#define VBUS_AUTO_IN_CURR_LIM_ENA	0x04
+
+/* Fuel Gauge constants */
+#define RESET_ACCU			0x02
+#define READ_REQ			0x01
+#define CC_DEEP_SLEEP_ENA		0x02
+#define CC_PWR_UP_ENA			0x01
+#define CC_SAMPLES_40			0x28
+#define RD_NCONV_ACCU_REQ		0x01
+#define CC_CALIB			0x08
+#define CC_INTAVGOFFSET_ENA		0x10
+#define CC_MUXOFFSET			0x80
+#define CC_INT_CAL_N_AVG_MASK		0x60
+#define CC_INT_CAL_SAMPLES_16		0x40
+#define CC_INT_CAL_SAMPLES_8		0x20
+#define CC_INT_CAL_SAMPLES_4		0x00
+
+/* RTC constants */
+#define RTC_BUP_CH_ENA			0x10
+
+/* BatCtrl Current Source Constants */
+#define BAT_CTRL_7U_ENA			0x01
+#define BAT_CTRL_20U_ENA		0x02
+#define BAT_CTRL_CMP_ENA		0x04
+#define FORCE_BAT_CTRL_CMP_HIGH		0x08
+#define BAT_CTRL_PULL_UP_ENA		0x10
+
+/* Battery type */
+#define BATTERY_UNKNOWN			00
+
+/**
+ * struct res_to_temp - defines one point in a temp to res curve. To
+ * be used in battery packs that combines the identification resistor with a
+ * NTC resistor.
+ * @temp:			battery pack temperature in Celcius
+ * @resist:			NTC resistor net total resistance
+ */
+struct res_to_temp {
+	int temp;
+	int resist;
+};
+
+/**
+ * struct batres_vs_temp - defines one point in a temp vs battery internal
+ * resistance curve.
+ * @temp:			battery pack temperature in Celcius
+ * @resist:			battery internal reistance in mOhm
+ */
+struct batres_vs_temp {
+	int temp;
+	int resist;
+};
+
+/* Forward declaration */
+struct ab8500_fg;
+
+/**
+ * struct ab8500_fg_parameters - Fuel gauge algorithm parameters, in seconds
+ * if not specified
+ * @recovery_sleep_timer:	Time between measurements while recovering
+ * @recovery_total_time:	Total recovery time
+ * @init_timer:			Measurement interval during startup
+ * @init_discard_time:		Time we discard voltage measurement at startup
+ * @init_total_time:		Total init time during startup
+ * @high_curr_time:		Time current has to be high to go to recovery
+ * @accu_charging:		FG accumulation time while charging
+ * @accu_high_curr:		FG accumulation time in high current mode
+ * @high_curr_threshold:	High current threshold, in mA
+ * @lowbat_threshold:		Low battery threshold, in mV
+ * @battok_falling_th_sel0	Threshold in mV for battOk signal sel0
+ *				Resolution in 50 mV step.
+ * @battok_raising_th_sel1	Threshold in mV for battOk signal sel1
+ *				Resolution in 50 mV step.
+ * @user_cap_limit		Capacity reported from user must be within this
+ *				limit to be considered as sane, in percentage
+ *				points.
+ * @maint_thres			This is the threshold where we stop reporting
+ *				battery full while in maintenance, in per cent
+ */
+struct ab8500_fg_parameters {
+	int recovery_sleep_timer;
+	int recovery_total_time;
+	int init_timer;
+	int init_discard_time;
+	int init_total_time;
+	int high_curr_time;
+	int accu_charging;
+	int accu_high_curr;
+	int high_curr_threshold;
+	int lowbat_threshold;
+	int battok_falling_th_sel0;
+	int battok_raising_th_sel1;
+	int user_cap_limit;
+	int maint_thres;
+};
+
+/**
+ * struct ab8500_charger_maximization - struct used by the board config.
+ * @use_maxi:		Enable maximization for this battery type
+ * @maxi_chg_curr:	Maximum charger current allowed
+ * @maxi_wait_cycles:	cycles to wait before setting charger current
+ * @charger_curr_step	delta between two charger current settings (mA)
+ */
+struct ab8500_maxim_parameters {
+	bool ena_maxi;
+	int chg_curr;
+	int wait_cycles;
+	int charger_curr_step;
+};
+
+/**
+ * struct ab8500_bm_capacity_levels - ab8500 capacity level data
+ * @critical:		critical capacity level in percent
+ * @low:		low capacity level in percent
+ * @normal:		normal capacity level in percent
+ * @high:		high capacity level in percent
+ * @full:		full capacity level in percent
+ */
+struct ab8500_bm_capacity_levels {
+	int critical;
+	int low;
+	int normal;
+	int high;
+	int full;
+};
+
+/**
+ * struct ab8500_bm_charger_parameters - Charger specific parameters
+ * @usb_volt_max:	maximum allowed USB charger voltage in mV
+ * @usb_curr_max:	maximum allowed USB charger current in mA
+ * @ac_volt_max:	maximum allowed AC charger voltage in mV
+ * @ac_curr_max:	maximum allowed AC charger current in mA
+ */
+struct ab8500_bm_charger_parameters {
+	int usb_volt_max;
+	int usb_curr_max;
+	int ac_volt_max;
+	int ac_curr_max;
+};
+
+/**
+ * struct ab8500_bm_data - ab8500 battery management data
+ * @temp_under		under this temp, charging is stopped
+ * @temp_low		between this temp and temp_under charging is reduced
+ * @temp_high		between this temp and temp_over charging is reduced
+ * @temp_over		over this temp, charging is stopped
+ * @temp_interval_chg	temperature measurement interval in s when charging
+ * @temp_interval_nochg	temperature measurement interval in s when not charging
+ * @main_safety_tmr_h	safety timer for main charger
+ * @usb_safety_tmr_h	safety timer for usb charger
+ * @bkup_bat_v		voltage which we charge the backup battery with
+ * @bkup_bat_i		current which we charge the backup battery with
+ * @no_maintenance	indicates that maintenance charging is disabled
+ * @adc_therm		placement of thermistor, batctrl or battemp adc
+ * @chg_unknown_bat	flag to enable charging of unknown batteries
+ * @enable_overshoot	flag to enable VBAT overshoot control
+ * @fg_res		resistance of FG resistor in 0.1mOhm
+ * @n_btypes		number of elements in array bat_type
+ * @batt_id		index of the identified battery in array bat_type
+ * @interval_charging	charge alg cycle period time when charging (sec)
+ * @interval_not_charging charge alg cycle period time when not charging (sec)
+ * @temp_hysteresis	temperature hysteresis
+ * @gnd_lift_resistance	Battery ground to phone ground resistance (mOhm)
+ * @maxi:		maximization parameters
+ * @cap_levels		capacity in percent for the different capacity levels
+ * @bat_type		table of supported battery types
+ * @chg_params		charger parameters
+ * @fg_params		fuel gauge parameters
+ */
+struct ab8500_bm_data {
+	int temp_under;
+	int temp_low;
+	int temp_high;
+	int temp_over;
+	int temp_interval_chg;
+	int temp_interval_nochg;
+	int main_safety_tmr_h;
+	int usb_safety_tmr_h;
+	int bkup_bat_v;
+	int bkup_bat_i;
+	bool no_maintenance;
+	bool chg_unknown_bat;
+	bool enable_overshoot;
+	enum abx500_adc_therm adc_therm;
+	int fg_res;
+	int n_btypes;
+	int batt_id;
+	int interval_charging;
+	int interval_not_charging;
+	int temp_hysteresis;
+	int gnd_lift_resistance;
+	const struct ab8500_maxim_parameters *maxi;
+	const struct ab8500_bm_capacity_levels *cap_levels;
+	const struct ab8500_bm_charger_parameters *chg_params;
+	const struct ab8500_fg_parameters *fg_params;
+};
+
+struct ab8500_charger_platform_data {
+	char **supplied_to;
+	size_t num_supplicants;
+	bool autopower_cfg;
+};
+
+struct ab8500_btemp_platform_data {
+	char **supplied_to;
+	size_t num_supplicants;
+};
+
+struct ab8500_fg_platform_data {
+	char **supplied_to;
+	size_t num_supplicants;
+};
+
+struct ab8500_chargalg_platform_data {
+	char **supplied_to;
+	size_t num_supplicants;
+};
+struct ab8500_btemp;
+struct ab8500_gpadc;
+struct ab8500_fg;
+#ifdef CONFIG_AB8500_BM
+void ab8500_fg_reinit(void);
+void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA);
+struct ab8500_btemp *ab8500_btemp_get(void);
+int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp);
+struct ab8500_fg *ab8500_fg_get(void);
+int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev);
+int ab8500_fg_inst_curr_start(struct ab8500_fg *di);
+int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res);
+int ab8500_fg_inst_curr_done(struct ab8500_fg *di);
+
+#else
+int ab8500_fg_inst_curr_done(struct ab8500_fg *di)
+{
+}
+static void ab8500_fg_reinit(void)
+{
+}
+static void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA)
+{
+}
+static struct ab8500_btemp *ab8500_btemp_get(void)
+{
+	return NULL;
+}
+static int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp)
+{
+	return 0;
+}
+struct ab8500_fg *ab8500_fg_get(void)
+{
+	return NULL;
+}
+static int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev)
+{
+	return -ENODEV;
+}
+
+static inline int ab8500_fg_inst_curr_start(struct ab8500_fg *di)
+{
+	return -ENODEV;
+}
+
+static inline int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res)
+{
+	return -ENODEV;
+}
+
+#endif
+#endif /* _AB8500_BM_H */
diff --git a/include/linux/mfd/abx500/ab8500-gpadc.h b/include/linux/mfd/abx500/ab8500-gpadc.h
new file mode 100644
index 00000000..25296676
--- /dev/null
+++ b/include/linux/mfd/abx500/ab8500-gpadc.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2010 ST-Ericsson SA
+ * Licensed under GPLv2.
+ *
+ * Author: Arun R Murthy <arun.murthy@stericsson.com>
+ * Author: Daniel Willerud <daniel.willerud@stericsson.com>
+ */
+
+#ifndef	_AB8500_GPADC_H
+#define _AB8500_GPADC_H
+
+/* GPADC source: From datasheet(ADCSwSel[4:0] in GPADCCtrl2) */
+#define BAT_CTRL	0x01
+#define BTEMP_BALL	0x02
+#define MAIN_CHARGER_V	0x03
+#define ACC_DETECT1	0x04
+#define ACC_DETECT2	0x05
+#define ADC_AUX1	0x06
+#define ADC_AUX2	0x07
+#define MAIN_BAT_V	0x08
+#define VBUS_V		0x09
+#define MAIN_CHARGER_C	0x0A
+#define USB_CHARGER_C	0x0B
+#define BK_BAT_V	0x0C
+#define DIE_TEMP	0x0D
+
+struct ab8500_gpadc;
+
+struct ab8500_gpadc *ab8500_gpadc_get(char *name);
+int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel);
+int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel);
+int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc,
+    u8 channel, int ad_value);
+
+#endif /* _AB8500_GPADC_H */
diff --git a/include/linux/mfd/abx500/ab8500-gpio.h b/include/linux/mfd/abx500/ab8500-gpio.h
new file mode 100644
index 00000000..2387c207
--- /dev/null
+++ b/include/linux/mfd/abx500/ab8500-gpio.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright ST-Ericsson 2010.
+ *
+ * Author: Bibek Basu <bibek.basu@stericsson.com>
+ * Licensed under GPLv2.
+ */
+
+#ifndef _AB8500_GPIO_H
+#define _AB8500_GPIO_H
+
+/*
+ * Platform data to register a block: only the initial gpio/irq number.
+ * Array sizes are large enough to contain all AB8500 and AB9540 GPIO
+ * registers.
+ */
+
+struct ab8500_gpio_platform_data {
+	int gpio_base;
+	u32 irq_base;
+	u8  config_reg[8];
+};
+
+#endif /* _AB8500_GPIO_H */
diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h
new file mode 100644
index 00000000..10eb5097
--- /dev/null
+++ b/include/linux/mfd/abx500/ab8500-sysctrl.h
@@ -0,0 +1,297 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com> for ST Ericsson.
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef __AB8500_SYSCTRL_H
+#define __AB8500_SYSCTRL_H
+
+#include <linux/bitops.h>
+
+#ifdef CONFIG_AB8500_CORE
+
+int ab8500_sysctrl_read(u16 reg, u8 *value);
+int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value);
+
+#else
+
+static inline int ab8500_sysctrl_read(u16 reg, u8 *value)
+{
+	return 0;
+}
+
+static inline int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value)
+{
+	return 0;
+}
+
+#endif /* CONFIG_AB8500_CORE */
+
+static inline int ab8500_sysctrl_set(u16 reg, u8 bits)
+{
+	return ab8500_sysctrl_write(reg, bits, bits);
+}
+
+static inline int ab8500_sysctrl_clear(u16 reg, u8 bits)
+{
+	return ab8500_sysctrl_write(reg, bits, 0);
+}
+
+/* Registers */
+#define AB8500_TURNONSTATUS		0x100
+#define AB8500_RESETSTATUS		0x101
+#define AB8500_PONKEY1PRESSSTATUS	0x102
+#define AB8500_SYSCLKREQSTATUS		0x142
+#define AB8500_STW4500CTRL1		0x180
+#define AB8500_STW4500CTRL2		0x181
+#define AB8500_STW4500CTRL3		0x200
+#define AB8500_MAINWDOGCTRL		0x201
+#define AB8500_MAINWDOGTIMER		0x202
+#define AB8500_LOWBAT			0x203
+#define AB8500_BATTOK			0x204
+#define AB8500_SYSCLKTIMER		0x205
+#define AB8500_SMPSCLKCTRL		0x206
+#define AB8500_SMPSCLKSEL1		0x207
+#define AB8500_SMPSCLKSEL2		0x208
+#define AB8500_SMPSCLKSEL3		0x209
+#define AB8500_SYSULPCLKCONF		0x20A
+#define AB8500_SYSULPCLKCTRL1		0x20B
+#define AB8500_SYSCLKCTRL		0x20C
+#define AB8500_SYSCLKREQ1VALID		0x20D
+#define AB8500_SYSTEMCTRLSUP		0x20F
+#define AB8500_SYSCLKREQ1RFCLKBUF	0x210
+#define AB8500_SYSCLKREQ2RFCLKBUF	0x211
+#define AB8500_SYSCLKREQ3RFCLKBUF	0x212
+#define AB8500_SYSCLKREQ4RFCLKBUF	0x213
+#define AB8500_SYSCLKREQ5RFCLKBUF	0x214
+#define AB8500_SYSCLKREQ6RFCLKBUF	0x215
+#define AB8500_SYSCLKREQ7RFCLKBUF	0x216
+#define AB8500_SYSCLKREQ8RFCLKBUF	0x217
+#define AB8500_DITHERCLKCTRL		0x220
+#define AB8500_SWATCTRL			0x230
+#define AB8500_HIQCLKCTRL		0x232
+#define AB8500_VSIMSYSCLKCTRL		0x233
+#define AB9540_SYSCLK12BUFCTRL		0x234
+#define AB9540_SYSCLK12CONFCTRL		0x235
+#define AB9540_SYSCLK12BUFCTRL2		0x236
+#define AB9540_SYSCLK12BUF1VALID	0x237
+#define AB9540_SYSCLK12BUF2VALID	0x238
+#define AB9540_SYSCLK12BUF3VALID	0x239
+#define AB9540_SYSCLK12BUF4VALID	0x23A
+
+/* Bits */
+#define AB8500_TURNONSTATUS_PORNVBAT BIT(0)
+#define AB8500_TURNONSTATUS_PONKEY1DBF BIT(1)
+#define AB8500_TURNONSTATUS_PONKEY2DBF BIT(2)
+#define AB8500_TURNONSTATUS_RTCALARM BIT(3)
+#define AB8500_TURNONSTATUS_MAINCHDET BIT(4)
+#define AB8500_TURNONSTATUS_VBUSDET BIT(5)
+#define AB8500_TURNONSTATUS_USBIDDETECT BIT(6)
+
+#define AB8500_RESETSTATUS_RESETN4500NSTATUS BIT(0)
+#define AB8500_RESETSTATUS_SWRESETN4500NSTATUS BIT(2)
+
+#define AB8500_PONKEY1PRESSSTATUS_PONKEY1PRESSTIME_MASK 0x7F
+#define AB8500_PONKEY1PRESSSTATUS_PONKEY1PRESSTIME_SHIFT 0
+
+#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ1STATUS BIT(0)
+#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ2STATUS BIT(1)
+#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ3STATUS BIT(2)
+#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ4STATUS BIT(3)
+#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ5STATUS BIT(4)
+#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ6STATUS BIT(5)
+#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ7STATUS BIT(6)
+#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ8STATUS BIT(7)
+
+#define AB8500_STW4500CTRL1_SWOFF BIT(0)
+#define AB8500_STW4500CTRL1_SWRESET4500N BIT(1)
+#define AB8500_STW4500CTRL1_THDB8500SWOFF BIT(2)
+
+#define AB8500_STW4500CTRL2_RESETNVAUX1VALID BIT(0)
+#define AB8500_STW4500CTRL2_RESETNVAUX2VALID BIT(1)
+#define AB8500_STW4500CTRL2_RESETNVAUX3VALID BIT(2)
+#define AB8500_STW4500CTRL2_RESETNVMODVALID BIT(3)
+#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY1VALID BIT(4)
+#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY2VALID BIT(5)
+#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY3VALID BIT(6)
+#define AB8500_STW4500CTRL2_RESETNVSMPS1VALID BIT(7)
+
+#define AB8500_STW4500CTRL3_CLK32KOUT2DIS BIT(0)
+#define AB8500_STW4500CTRL3_RESETAUDN BIT(1)
+#define AB8500_STW4500CTRL3_RESETDENCN BIT(2)
+#define AB8500_STW4500CTRL3_THSDENA BIT(3)
+
+#define AB8500_MAINWDOGCTRL_MAINWDOGENA BIT(0)
+#define AB8500_MAINWDOGCTRL_MAINWDOGKICK BIT(1)
+#define AB8500_MAINWDOGCTRL_WDEXPTURNONVALID BIT(4)
+
+#define AB8500_MAINWDOGTIMER_MAINWDOGTIMER_MASK 0x7F
+#define AB8500_MAINWDOGTIMER_MAINWDOGTIMER_SHIFT 0
+
+#define AB8500_LOWBAT_LOWBATENA BIT(0)
+#define AB8500_LOWBAT_LOWBAT_MASK 0x7E
+#define AB8500_LOWBAT_LOWBAT_SHIFT 1
+
+#define AB8500_BATTOK_BATTOKSEL0THF_MASK 0x0F
+#define AB8500_BATTOK_BATTOKSEL0THF_SHIFT 0
+#define AB8500_BATTOK_BATTOKSEL1THF_MASK 0xF0
+#define AB8500_BATTOK_BATTOKSEL1THF_SHIFT 4
+
+#define AB8500_SYSCLKTIMER_SYSCLKTIMER_MASK 0x0F
+#define AB8500_SYSCLKTIMER_SYSCLKTIMER_SHIFT 0
+#define AB8500_SYSCLKTIMER_SYSCLKTIMERADJ_MASK 0xF0
+#define AB8500_SYSCLKTIMER_SYSCLKTIMERADJ_SHIFT 4
+
+#define AB8500_SMPSCLKCTRL_SMPSCLKINTSEL_MASK 0x03
+#define AB8500_SMPSCLKCTRL_SMPSCLKINTSEL_SHIFT 0
+#define AB8500_SMPSCLKCTRL_3M2CLKINTENA BIT(2)
+
+#define AB8500_SMPSCLKSEL1_VARMCLKSEL_MASK 0x07
+#define AB8500_SMPSCLKSEL1_VARMCLKSEL_SHIFT 0
+#define AB8500_SMPSCLKSEL1_VAPECLKSEL_MASK 0x38
+#define AB8500_SMPSCLKSEL1_VAPECLKSEL_SHIFT 3
+
+#define AB8500_SMPSCLKSEL2_VMODCLKSEL_MASK 0x07
+#define AB8500_SMPSCLKSEL2_VMODCLKSEL_SHIFT 0
+#define AB8500_SMPSCLKSEL2_VSMPS1CLKSEL_MASK 0x38
+#define AB8500_SMPSCLKSEL2_VSMPS1CLKSEL_SHIFT 3
+
+#define AB8500_SMPSCLKSEL3_VSMPS2CLKSEL_MASK 0x07
+#define AB8500_SMPSCLKSEL3_VSMPS2CLKSEL_SHIFT 0
+#define AB8500_SMPSCLKSEL3_VSMPS3CLKSEL_MASK 0x38
+#define AB8500_SMPSCLKSEL3_VSMPS3CLKSEL_SHIFT 3
+
+#define AB8500_SYSULPCLKCONF_ULPCLKCONF_MASK 0x03
+#define AB8500_SYSULPCLKCONF_ULPCLKCONF_SHIFT 0
+#define AB8500_SYSULPCLKCONF_CLK27MHZSTRE BIT(2)
+#define AB8500_SYSULPCLKCONF_TVOUTCLKDELN BIT(3)
+#define AB8500_SYSULPCLKCONF_TVOUTCLKINV BIT(4)
+#define AB8500_SYSULPCLKCONF_ULPCLKSTRE BIT(5)
+#define AB8500_SYSULPCLKCONF_CLK27MHZBUFENA BIT(6)
+#define AB8500_SYSULPCLKCONF_CLK27MHZPDENA BIT(7)
+
+#define AB8500_SYSULPCLKCTRL1_SYSULPCLKINTSEL_MASK 0x03
+#define AB8500_SYSULPCLKCTRL1_SYSULPCLKINTSEL_SHIFT 0
+#define AB8500_SYSULPCLKCTRL1_ULPCLKREQ BIT(2)
+#define AB8500_SYSULPCLKCTRL1_4500SYSCLKREQ BIT(3)
+#define AB8500_SYSULPCLKCTRL1_AUDIOCLKENA BIT(4)
+#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF2REQ BIT(5)
+#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF3REQ BIT(6)
+#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF4REQ BIT(7)
+
+#define AB8500_SYSCLKCTRL_TVOUTPLLENA BIT(0)
+#define AB8500_SYSCLKCTRL_TVOUTCLKENA BIT(1)
+#define AB8500_SYSCLKCTRL_USBCLKENA BIT(2)
+
+#define AB8500_SYSCLKREQ1VALID_SYSCLKREQ1VALID BIT(0)
+#define AB8500_SYSCLKREQ1VALID_ULPCLKREQ1VALID BIT(1)
+#define AB8500_SYSCLKREQ1VALID_USBSYSCLKREQ1VALID BIT(2)
+
+#define AB8500_SYSTEMCTRLSUP_EXTSUP12LPNCLKSEL_MASK 0x03
+#define AB8500_SYSTEMCTRLSUP_EXTSUP12LPNCLKSEL_SHIFT 0
+#define AB8500_SYSTEMCTRLSUP_EXTSUP3LPNCLKSEL_MASK 0x0C
+#define AB8500_SYSTEMCTRLSUP_EXTSUP3LPNCLKSEL_SHIFT 2
+#define AB8500_SYSTEMCTRLSUP_INTDB8500NOD BIT(4)
+
+#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF2 BIT(2)
+#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF3 BIT(3)
+#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF4 BIT(4)
+
+#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF2 BIT(2)
+#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF3 BIT(3)
+#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF4 BIT(4)
+
+#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF2 BIT(2)
+#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF3 BIT(3)
+#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF4 BIT(4)
+
+#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF2 BIT(2)
+#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF3 BIT(3)
+#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF4 BIT(4)
+
+#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF2 BIT(2)
+#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF3 BIT(3)
+#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF4 BIT(4)
+
+#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF2 BIT(2)
+#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF3 BIT(3)
+#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF4 BIT(4)
+
+#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF2 BIT(2)
+#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF3 BIT(3)
+#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF4 BIT(4)
+
+#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF2 BIT(2)
+#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF3 BIT(3)
+#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF4 BIT(4)
+
+#define AB8500_DITHERCLKCTRL_VARMDITHERENA BIT(0)
+#define AB8500_DITHERCLKCTRL_VSMPS3DITHERENA BIT(1)
+#define AB8500_DITHERCLKCTRL_VSMPS1DITHERENA BIT(2)
+#define AB8500_DITHERCLKCTRL_VSMPS2DITHERENA BIT(3)
+#define AB8500_DITHERCLKCTRL_VMODDITHERENA BIT(4)
+#define AB8500_DITHERCLKCTRL_VAPEDITHERENA BIT(5)
+#define AB8500_DITHERCLKCTRL_DITHERDEL_MASK 0xC0
+#define AB8500_DITHERCLKCTRL_DITHERDEL_SHIFT 6
+
+#define AB8500_SWATCTRL_UPDATERF BIT(0)
+#define AB8500_SWATCTRL_SWATENABLE BIT(1)
+#define AB8500_SWATCTRL_RFOFFTIMER_MASK 0x1C
+#define AB8500_SWATCTRL_RFOFFTIMER_SHIFT 2
+#define AB8500_SWATCTRL_SWATBIT5 BIT(6)
+
+#define AB8500_HIQCLKCTRL_SYSCLKREQ1HIQENAVALID BIT(0)
+#define AB8500_HIQCLKCTRL_SYSCLKREQ2HIQENAVALID BIT(1)
+#define AB8500_HIQCLKCTRL_SYSCLKREQ3HIQENAVALID BIT(2)
+#define AB8500_HIQCLKCTRL_SYSCLKREQ4HIQENAVALID BIT(3)
+#define AB8500_HIQCLKCTRL_SYSCLKREQ5HIQENAVALID BIT(4)
+#define AB8500_HIQCLKCTRL_SYSCLKREQ6HIQENAVALID BIT(5)
+#define AB8500_HIQCLKCTRL_SYSCLKREQ7HIQENAVALID BIT(6)
+#define AB8500_HIQCLKCTRL_SYSCLKREQ8HIQENAVALID BIT(7)
+
+#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ1VALID BIT(0)
+#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ2VALID BIT(1)
+#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ3VALID BIT(2)
+#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ4VALID BIT(3)
+#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ5VALID BIT(4)
+#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ6VALID BIT(5)
+#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ7VALID BIT(6)
+#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ8VALID BIT(7)
+
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF1ENA BIT(0)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF2ENA BIT(1)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF3ENA BIT(2)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF4ENA BIT(3)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUFENA_MASK 0x0F
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF1STRE BIT(4)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF2STRE BIT(5)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF3STRE BIT(6)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF4STRE BIT(7)
+#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUFSTRE_MASK 0xF0
+
+#define AB9540_SYSCLK12CONFCTRL_PLL26TO38ENA BIT(0)
+#define AB9540_SYSCLK12CONFCTRL_SYSCLK12USBMUXSEL BIT(1)
+#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL_MASK 0x0C
+#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL_SHIFT 2
+#define AB9540_SYSCLK12CONFCTRL_SYSCLK12BUFMUX BIT(4)
+#define AB9540_SYSCLK12CONFCTRL_SYSCLK12PLLMUX BIT(5)
+#define AB9540_SYSCLK12CONFCTRL_SYSCLK2MUXVALID BIT(6)
+
+#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF1PDENA BIT(0)
+#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF2PDENA BIT(1)
+#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF3PDENA BIT(2)
+#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF4PDENA BIT(3)
+
+#define AB9540_SYSCLK12BUF1VALID_SYSCLK12BUF1VALID_MASK 0xFF
+#define AB9540_SYSCLK12BUF1VALID_SYSCLK12BUF1VALID_SHIFT 0
+
+#define AB9540_SYSCLK12BUF2VALID_SYSCLK12BUF2VALID_MASK 0xFF
+#define AB9540_SYSCLK12BUF2VALID_SYSCLK12BUF2VALID_SHIFT 0
+
+#define AB9540_SYSCLK12BUF3VALID_SYSCLK12BUF3VALID_MASK 0xFF
+#define AB9540_SYSCLK12BUF3VALID_SYSCLK12BUF3VALID_SHIFT 0
+
+#define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_MASK 0xFF
+#define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_SHIFT 0
+
+#endif /* __AB8500_SYSCTRL_H */
diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h
new file mode 100644
index 00000000..fccc3002
--- /dev/null
+++ b/include/linux/mfd/abx500/ab8500.h
@@ -0,0 +1,327 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ */
+#ifndef MFD_AB8500_H
+#define MFD_AB8500_H
+
+#include <linux/mutex.h>
+
+struct device;
+
+/*
+ * AB IC versions
+ *
+ * AB8500_VERSION_AB8500 should be 0xFF but will never be read as need a
+ * non-supported multi-byte I2C access via PRCMU. Set to 0x00 to ease the
+ * print of version string.
+ */
+enum ab8500_version {
+	AB8500_VERSION_AB8500 = 0x0,
+	AB8500_VERSION_AB8505 = 0x1,
+	AB8500_VERSION_AB9540 = 0x2,
+	AB8500_VERSION_AB8540 = 0x3,
+	AB8500_VERSION_UNDEFINED,
+};
+
+/* AB8500 CIDs*/
+#define AB8500_CUTEARLY	0x00
+#define AB8500_CUT1P0	0x10
+#define AB8500_CUT1P1	0x11
+#define AB8500_CUT2P0	0x20
+#define AB8500_CUT3P0	0x30
+#define AB8500_CUT3P3	0x33
+
+/*
+ * AB8500 bank addresses
+ */
+#define AB8500_SYS_CTRL1_BLOCK	0x1
+#define AB8500_SYS_CTRL2_BLOCK	0x2
+#define AB8500_REGU_CTRL1	0x3
+#define AB8500_REGU_CTRL2	0x4
+#define AB8500_USB		0x5
+#define AB8500_TVOUT		0x6
+#define AB8500_DBI		0x7
+#define AB8500_ECI_AV_ACC	0x8
+#define AB8500_RESERVED		0x9
+#define AB8500_GPADC		0xA
+#define AB8500_CHARGER		0xB
+#define AB8500_GAS_GAUGE	0xC
+#define AB8500_AUDIO		0xD
+#define AB8500_INTERRUPT	0xE
+#define AB8500_RTC		0xF
+#define AB8500_MISC		0x10
+#define AB8500_DEVELOPMENT	0x11
+#define AB8500_DEBUG		0x12
+#define AB8500_PROD_TEST	0x13
+#define AB8500_OTP_EMUL		0x15
+
+/*
+ * Interrupts
+ * Values used to index into array ab8500_irq_regoffset[] defined in
+ * drivers/mdf/ab8500-core.c
+ */
+/* Definitions for AB8500 and AB9540 */
+/* ab8500_irq_regoffset[0] -> IT[Source|Latch|Mask]1 */
+#define AB8500_INT_MAIN_EXT_CH_NOT_OK	0 /* not 8505/9540 */
+#define AB8500_INT_UN_PLUG_TV_DET	1 /* not 8505/9540 */
+#define AB8500_INT_PLUG_TV_DET		2 /* not 8505/9540 */
+#define AB8500_INT_TEMP_WARM		3
+#define AB8500_INT_PON_KEY2DB_F		4
+#define AB8500_INT_PON_KEY2DB_R		5
+#define AB8500_INT_PON_KEY1DB_F		6
+#define AB8500_INT_PON_KEY1DB_R		7
+/* ab8500_irq_regoffset[1] -> IT[Source|Latch|Mask]2 */
+#define AB8500_INT_BATT_OVV		8
+#define AB8500_INT_MAIN_CH_UNPLUG_DET	10 /* not 8505 */
+#define AB8500_INT_MAIN_CH_PLUG_DET	11 /* not 8505 */
+#define AB8500_INT_VBUS_DET_F		14
+#define AB8500_INT_VBUS_DET_R		15
+/* ab8500_irq_regoffset[2] -> IT[Source|Latch|Mask]3 */
+#define AB8500_INT_VBUS_CH_DROP_END	16
+#define AB8500_INT_RTC_60S		17
+#define AB8500_INT_RTC_ALARM		18
+#define AB8500_INT_BAT_CTRL_INDB	20
+#define AB8500_INT_CH_WD_EXP		21
+#define AB8500_INT_VBUS_OVV		22
+#define AB8500_INT_MAIN_CH_DROP_END	23 /* not 8505/9540 */
+/* ab8500_irq_regoffset[3] -> IT[Source|Latch|Mask]4 */
+#define AB8500_INT_CCN_CONV_ACC		24
+#define AB8500_INT_INT_AUD		25
+#define AB8500_INT_CCEOC		26
+#define AB8500_INT_CC_INT_CALIB		27
+#define AB8500_INT_LOW_BAT_F		28
+#define AB8500_INT_LOW_BAT_R		29
+#define AB8500_INT_BUP_CHG_NOT_OK	30
+#define AB8500_INT_BUP_CHG_OK		31
+/* ab8500_irq_regoffset[4] -> IT[Source|Latch|Mask]5 */
+#define AB8500_INT_GP_HW_ADC_CONV_END	32 /* not 8505 */
+#define AB8500_INT_ACC_DETECT_1DB_F	33
+#define AB8500_INT_ACC_DETECT_1DB_R	34
+#define AB8500_INT_ACC_DETECT_22DB_F	35
+#define AB8500_INT_ACC_DETECT_22DB_R	36
+#define AB8500_INT_ACC_DETECT_21DB_F	37
+#define AB8500_INT_ACC_DETECT_21DB_R	38
+#define AB8500_INT_GP_SW_ADC_CONV_END	39
+/* ab8500_irq_regoffset[5] -> IT[Source|Latch|Mask]7 */
+#define AB8500_INT_GPIO6R		40 /* not 8505/9540 */
+#define AB8500_INT_GPIO7R		41 /* not 8505/9540 */
+#define AB8500_INT_GPIO8R		42 /* not 8505/9540 */
+#define AB8500_INT_GPIO9R		43 /* not 8505/9540 */
+#define AB8500_INT_GPIO10R		44
+#define AB8500_INT_GPIO11R		45
+#define AB8500_INT_GPIO12R		46 /* not 8505 */
+#define AB8500_INT_GPIO13R		47
+/* ab8500_irq_regoffset[6] -> IT[Source|Latch|Mask]8 */
+#define AB8500_INT_GPIO24R		48 /* not 8505 */
+#define AB8500_INT_GPIO25R		49 /* not 8505 */
+#define AB8500_INT_GPIO36R		50 /* not 8505/9540 */
+#define AB8500_INT_GPIO37R		51 /* not 8505/9540 */
+#define AB8500_INT_GPIO38R		52 /* not 8505/9540 */
+#define AB8500_INT_GPIO39R		53 /* not 8505/9540 */
+#define AB8500_INT_GPIO40R		54
+#define AB8500_INT_GPIO41R		55
+/* ab8500_irq_regoffset[7] -> IT[Source|Latch|Mask]9 */
+#define AB8500_INT_GPIO6F		56 /* not 8505/9540 */
+#define AB8500_INT_GPIO7F		57 /* not 8505/9540 */
+#define AB8500_INT_GPIO8F		58 /* not 8505/9540 */
+#define AB8500_INT_GPIO9F		59 /* not 8505/9540 */
+#define AB8500_INT_GPIO10F		60
+#define AB8500_INT_GPIO11F		61
+#define AB8500_INT_GPIO12F		62 /* not 8505 */
+#define AB8500_INT_GPIO13F		63
+/* ab8500_irq_regoffset[8] -> IT[Source|Latch|Mask]10 */
+#define AB8500_INT_GPIO24F		64 /* not 8505 */
+#define AB8500_INT_GPIO25F		65 /* not 8505 */
+#define AB8500_INT_GPIO36F		66 /* not 8505/9540 */
+#define AB8500_INT_GPIO37F		67 /* not 8505/9540 */
+#define AB8500_INT_GPIO38F		68 /* not 8505/9540 */
+#define AB8500_INT_GPIO39F		69 /* not 8505/9540 */
+#define AB8500_INT_GPIO40F		70
+#define AB8500_INT_GPIO41F		71
+/* ab8500_irq_regoffset[9] -> IT[Source|Latch|Mask]12 */
+#define AB8500_INT_ADP_SOURCE_ERROR	72
+#define AB8500_INT_ADP_SINK_ERROR	73
+#define AB8500_INT_ADP_PROBE_PLUG	74
+#define AB8500_INT_ADP_PROBE_UNPLUG	75
+#define AB8500_INT_ADP_SENSE_OFF	76
+#define AB8500_INT_USB_PHY_POWER_ERR	78
+#define AB8500_INT_USB_LINK_STATUS	79
+/* ab8500_irq_regoffset[10] -> IT[Source|Latch|Mask]19 */
+#define AB8500_INT_BTEMP_LOW		80
+#define AB8500_INT_BTEMP_LOW_MEDIUM	81
+#define AB8500_INT_BTEMP_MEDIUM_HIGH	82
+#define AB8500_INT_BTEMP_HIGH		83
+/* ab8500_irq_regoffset[11] -> IT[Source|Latch|Mask]20 */
+#define AB8500_INT_SRP_DETECT		88
+#define AB8500_INT_USB_CHARGER_NOT_OKR	89
+#define AB8500_INT_ID_WAKEUP_R		90
+#define AB8500_INT_ID_DET_R1R		92
+#define AB8500_INT_ID_DET_R2R		93
+#define AB8500_INT_ID_DET_R3R		94
+#define AB8500_INT_ID_DET_R4R		95
+/* ab8500_irq_regoffset[12] -> IT[Source|Latch|Mask]21 */
+#define AB8500_INT_ID_WAKEUP_F		96
+#define AB8500_INT_ID_DET_R1F		98
+#define AB8500_INT_ID_DET_R2F		99
+#define AB8500_INT_ID_DET_R3F		100
+#define AB8500_INT_ID_DET_R4F		101
+#define AB8500_INT_CHAUTORESTARTAFTSEC  102
+#define AB8500_INT_CHSTOPBYSEC		103
+/* ab8500_irq_regoffset[13] -> IT[Source|Latch|Mask]22 */
+#define AB8500_INT_USB_CH_TH_PROT_F	104
+#define AB8500_INT_USB_CH_TH_PROT_R    105
+#define AB8500_INT_MAIN_CH_TH_PROT_F	106 /* not 8505/9540 */
+#define AB8500_INT_MAIN_CH_TH_PROT_R	107 /* not 8505/9540 */
+#define AB8500_INT_CHCURLIMNOHSCHIRP	109
+#define AB8500_INT_CHCURLIMHSCHIRP	110
+#define AB8500_INT_XTAL32K_KO		111
+
+/* Definitions for AB9540 */
+/* ab8500_irq_regoffset[14] -> IT[Source|Latch|Mask]13 */
+#define AB9540_INT_GPIO50R		113
+#define AB9540_INT_GPIO51R		114 /* not 8505 */
+#define AB9540_INT_GPIO52R		115
+#define AB9540_INT_GPIO53R		116
+#define AB9540_INT_GPIO54R		117 /* not 8505 */
+#define AB9540_INT_IEXT_CH_RF_BFN_R	118
+#define AB9540_INT_IEXT_CH_RF_BFN_F	119
+/* ab8500_irq_regoffset[15] -> IT[Source|Latch|Mask]14 */
+#define AB9540_INT_GPIO50F		121
+#define AB9540_INT_GPIO51F		122 /* not 8505 */
+#define AB9540_INT_GPIO52F		123
+#define AB9540_INT_GPIO53F		124
+#define AB9540_INT_GPIO54F		125 /* not 8505 */
+
+/*
+ * AB8500_AB9540_NR_IRQS is used when configuring the IRQ numbers for the
+ * entire platform. This is a "compile time" constant so this must be set to
+ * the largest possible value that may be encountered with different AB SOCs.
+ * Of the currently supported AB devices, AB8500 and AB9540, it is the AB9540
+ * which is larger.
+ */
+#define AB8500_NR_IRQS			112
+#define AB8505_NR_IRQS			128
+#define AB9540_NR_IRQS			128
+/* This is set to the roof of any AB8500 chip variant IRQ counts */
+#define AB8500_MAX_NR_IRQS		AB9540_NR_IRQS
+
+#define AB8500_NUM_IRQ_REGS		14
+#define AB9540_NUM_IRQ_REGS		17
+
+/**
+ * struct ab8500 - ab8500 internal structure
+ * @dev: parent device
+ * @lock: read/write operations lock
+ * @irq_lock: genirq bus lock
+ * @irq: irq line
+ * @version: chip version id (e.g. ab8500 or ab9540)
+ * @chip_id: chip revision id
+ * @write: register write
+ * @write_masked: masked register write
+ * @read: register read
+ * @rx_buf: rx buf for SPI
+ * @tx_buf: tx buf for SPI
+ * @mask: cache of IRQ regs for bus lock
+ * @oldmask: cache of previous IRQ regs for bus lock
+ * @mask_size: Actual number of valid entries in mask[], oldmask[] and
+ * irq_reg_offset
+ * @irq_reg_offset: Array of offsets into IRQ registers
+ */
+struct ab8500 {
+	struct device	*dev;
+	struct mutex	lock;
+	struct mutex	irq_lock;
+
+	int		irq_base;
+	int		irq;
+	enum ab8500_version version;
+	u8		chip_id;
+
+	int (*write)(struct ab8500 *ab8500, u16 addr, u8 data);
+	int (*write_masked)(struct ab8500 *ab8500, u16 addr, u8 mask, u8 data);
+	int (*read)(struct ab8500 *ab8500, u16 addr);
+
+	unsigned long	tx_buf[4];
+	unsigned long	rx_buf[4];
+
+	u8 *mask;
+	u8 *oldmask;
+	int mask_size;
+	const int *irq_reg_offset;
+};
+
+struct regulator_reg_init;
+struct regulator_init_data;
+struct ab8500_gpio_platform_data;
+
+/**
+ * struct ab8500_platform_data - AB8500 platform data
+ * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used
+ * @init: board-specific initialization after detection of ab8500
+ * @num_regulator_reg_init: number of regulator init registers
+ * @regulator_reg_init: regulator init registers
+ * @num_regulator: number of regulators
+ * @regulator: machine-specific constraints for regulators
+ */
+struct ab8500_platform_data {
+	int irq_base;
+	void (*init) (struct ab8500 *);
+	int num_regulator_reg_init;
+	struct ab8500_regulator_reg_init *regulator_reg_init;
+	int num_regulator;
+	struct regulator_init_data *regulator;
+	struct ab8500_gpio_platform_data *gpio;
+};
+
+extern int __devinit ab8500_init(struct ab8500 *ab8500,
+				 enum ab8500_version version);
+extern int __devexit ab8500_exit(struct ab8500 *ab8500);
+
+static inline int is_ab8500(struct ab8500 *ab)
+{
+	return ab->version == AB8500_VERSION_AB8500;
+}
+
+static inline int is_ab8505(struct ab8500 *ab)
+{
+	return ab->version == AB8500_VERSION_AB8505;
+}
+
+static inline int is_ab9540(struct ab8500 *ab)
+{
+	return ab->version == AB8500_VERSION_AB9540;
+}
+
+static inline int is_ab8540(struct ab8500 *ab)
+{
+	return ab->version == AB8500_VERSION_AB8540;
+}
+
+/* exclude also ab8505, ab9540... */
+static inline int is_ab8500_1p0_or_earlier(struct ab8500 *ab)
+{
+	return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT1P0));
+}
+
+/* exclude also ab8505, ab9540... */
+static inline int is_ab8500_1p1_or_earlier(struct ab8500 *ab)
+{
+	return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT1P1));
+}
+
+/* exclude also ab8505, ab9540... */
+static inline int is_ab8500_2p0_or_earlier(struct ab8500 *ab)
+{
+	return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT2P0));
+}
+
+/* exclude also ab8505, ab9540... */
+static inline int is_ab8500_2p0(struct ab8500 *ab)
+{
+	return (is_ab8500(ab) && (ab->chip_id == AB8500_CUT2P0));
+}
+
+#endif /* MFD_AB8500_H */
diff --git a/include/linux/mfd/abx500/ux500_chargalg.h b/include/linux/mfd/abx500/ux500_chargalg.h
new file mode 100644
index 00000000..9b077257
--- /dev/null
+++ b/include/linux/mfd/abx500/ux500_chargalg.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ * Author: Johan Gardsmark <johan.gardsmark@stericsson.com> for ST-Ericsson.
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+
+#ifndef _UX500_CHARGALG_H
+#define _UX500_CHARGALG_H
+
+#include <linux/power_supply.h>
+
+#define psy_to_ux500_charger(x) container_of((x), \
+		struct ux500_charger, psy)
+
+/* Forward declaration */
+struct ux500_charger;
+
+struct ux500_charger_ops {
+	int (*enable) (struct ux500_charger *, int, int, int);
+	int (*kick_wd) (struct ux500_charger *);
+	int (*update_curr) (struct ux500_charger *, int);
+};
+
+/**
+ * struct ux500_charger - power supply ux500 charger sub class
+ * @psy			power supply base class
+ * @ops			ux500 charger operations
+ * @max_out_volt	maximum output charger voltage in mV
+ * @max_out_curr	maximum output charger current in mA
+ */
+struct ux500_charger {
+	struct power_supply psy;
+	struct ux500_charger_ops ops;
+	int max_out_volt;
+	int max_out_curr;
+};
+
+#endif
diff --git a/include/linux/mfd/adp5520.h b/include/linux/mfd/adp5520.h
new file mode 100644
index 00000000..ac37558a
--- /dev/null
+++ b/include/linux/mfd/adp5520.h
@@ -0,0 +1,299 @@
+/*
+ * Definitions and platform data for Analog Devices
+ * ADP5520/ADP5501 MFD PMICs (Backlight, LED, GPIO and Keys)
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+
+#ifndef __LINUX_MFD_ADP5520_H
+#define __LINUX_MFD_ADP5520_H
+
+#define ID_ADP5520		5520
+#define ID_ADP5501		5501
+
+/*
+ * ADP5520/ADP5501 Register Map
+ */
+
+#define ADP5520_MODE_STATUS 		0x00
+#define ADP5520_INTERRUPT_ENABLE 	0x01
+#define ADP5520_BL_CONTROL 		0x02
+#define ADP5520_BL_TIME 		0x03
+#define ADP5520_BL_FADE 		0x04
+#define ADP5520_DAYLIGHT_MAX 		0x05
+#define ADP5520_DAYLIGHT_DIM 		0x06
+#define ADP5520_OFFICE_MAX 		0x07
+#define ADP5520_OFFICE_DIM 		0x08
+#define ADP5520_DARK_MAX 		0x09
+#define ADP5520_DARK_DIM 		0x0A
+#define ADP5520_BL_VALUE 		0x0B
+#define ADP5520_ALS_CMPR_CFG 		0x0C
+#define ADP5520_L2_TRIP 		0x0D
+#define ADP5520_L2_HYS 			0x0E
+#define ADP5520_L3_TRIP 		0x0F
+#define ADP5520_L3_HYS 			0x10
+#define ADP5520_LED_CONTROL 		0x11
+#define ADP5520_LED_TIME 		0x12
+#define ADP5520_LED_FADE 		0x13
+#define ADP5520_LED1_CURRENT 		0x14
+#define ADP5520_LED2_CURRENT 		0x15
+#define ADP5520_LED3_CURRENT 		0x16
+
+/*
+ * ADP5520 Register Map
+ */
+
+#define ADP5520_GPIO_CFG_1 		0x17
+#define ADP5520_GPIO_CFG_2 		0x18
+#define ADP5520_GPIO_IN 		0x19
+#define ADP5520_GPIO_OUT 		0x1A
+#define ADP5520_GPIO_INT_EN 		0x1B
+#define ADP5520_GPIO_INT_STAT 		0x1C
+#define ADP5520_GPIO_INT_LVL 		0x1D
+#define ADP5520_GPIO_DEBOUNCE 		0x1E
+#define ADP5520_GPIO_PULLUP 		0x1F
+#define ADP5520_KP_INT_STAT_1 		0x20
+#define ADP5520_KP_INT_STAT_2 		0x21
+#define ADP5520_KR_INT_STAT_1 		0x22
+#define ADP5520_KR_INT_STAT_2 		0x23
+#define ADP5520_KEY_STAT_1 		0x24
+#define ADP5520_KEY_STAT_2 		0x25
+
+/*
+ * MODE_STATUS bits
+ */
+
+#define ADP5520_nSTNBY		(1 << 7)
+#define ADP5520_BL_EN           (1 << 6)
+#define ADP5520_DIM_EN          (1 << 5)
+#define ADP5520_OVP_INT         (1 << 4)
+#define ADP5520_CMPR_INT        (1 << 3)
+#define ADP5520_GPI_INT         (1 << 2)
+#define ADP5520_KR_INT          (1 << 1)
+#define ADP5520_KP_INT          (1 << 0)
+
+/*
+ * INTERRUPT_ENABLE bits
+ */
+
+#define ADP5520_AUTO_LD_EN      (1 << 4)
+#define ADP5520_CMPR_IEN        (1 << 3)
+#define ADP5520_OVP_IEN         (1 << 2)
+#define ADP5520_KR_IEN          (1 << 1)
+#define ADP5520_KP_IEN          (1 << 0)
+
+/*
+ * BL_CONTROL bits
+ */
+
+#define ADP5520_BL_LVL          ((x) << 5)
+#define ADP5520_BL_LAW          ((x) << 4)
+#define ADP5520_BL_AUTO_ADJ     (1 << 3)
+#define ADP5520_OVP_EN          (1 << 2)
+#define ADP5520_FOVR            (1 << 1)
+#define ADP5520_KP_BL_EN        (1 << 0)
+
+/*
+ * ALS_CMPR_CFG bits
+ */
+
+#define ADP5520_L3_OUT		(1 << 3)
+#define ADP5520_L2_OUT		(1 << 2)
+#define ADP5520_L3_EN		(1 << 1)
+
+#define ADP5020_MAX_BRIGHTNESS	0x7F
+
+#define FADE_VAL(in, out)	((0xF & (in)) | ((0xF & (out)) << 4))
+#define BL_CTRL_VAL(law, auto)	(((1 & (auto)) << 3) | ((0x3 & (law)) << 4))
+#define ALS_CMPR_CFG_VAL(filt, l3_en)	(((0x7 & filt) << 5) | l3_en)
+
+/*
+ * LEDs subdevice bits and masks
+ */
+
+#define ADP5520_01_MAXLEDS 3
+
+#define ADP5520_FLAG_LED_MASK 		0x3
+#define ADP5520_FLAG_OFFT_SHIFT 	8
+#define ADP5520_FLAG_OFFT_MASK 		0x3
+
+#define ADP5520_R3_MODE		(1 << 5)
+#define ADP5520_C3_MODE		(1 << 4)
+#define ADP5520_LED_LAW		(1 << 3)
+#define ADP5520_LED3_EN		(1 << 2)
+#define ADP5520_LED2_EN		(1 << 1)
+#define ADP5520_LED1_EN		(1 << 0)
+
+/*
+ * GPIO subdevice bits and masks
+ */
+
+#define ADP5520_MAXGPIOS	8
+
+#define ADP5520_GPIO_C3		(1 << 7)	/* LED2 or GPIO7 aka C3 */
+#define ADP5520_GPIO_C2		(1 << 6)
+#define ADP5520_GPIO_C1		(1 << 5)
+#define ADP5520_GPIO_C0		(1 << 4)
+#define ADP5520_GPIO_R3		(1 << 3)	/* LED3 or GPIO3 aka R3 */
+#define ADP5520_GPIO_R2		(1 << 2)
+#define ADP5520_GPIO_R1		(1 << 1)
+#define ADP5520_GPIO_R0		(1 << 0)
+
+struct adp5520_gpio_platform_data {
+	unsigned gpio_start;
+	u8 gpio_en_mask;
+	u8 gpio_pullup_mask;
+};
+
+/*
+ * Keypad subdevice bits and masks
+ */
+
+#define ADP5520_MAXKEYS	16
+
+#define ADP5520_COL_C3 		(1 << 7)	/* LED2 or GPIO7 aka C3 */
+#define ADP5520_COL_C2		(1 << 6)
+#define ADP5520_COL_C1		(1 << 5)
+#define ADP5520_COL_C0		(1 << 4)
+#define ADP5520_ROW_R3		(1 << 3)	/* LED3 or GPIO3 aka R3 */
+#define ADP5520_ROW_R2		(1 << 2)
+#define ADP5520_ROW_R1		(1 << 1)
+#define ADP5520_ROW_R0		(1 << 0)
+
+#define ADP5520_KEY(row, col) (col + row * 4)
+#define ADP5520_KEYMAPSIZE	ADP5520_MAXKEYS
+
+struct adp5520_keys_platform_data {
+	int rows_en_mask;		/* Number of rows */
+	int cols_en_mask;		/* Number of columns */
+	const unsigned short *keymap;	/* Pointer to keymap */
+	unsigned short keymapsize;	/* Keymap size */
+	unsigned repeat:1;		/* Enable key repeat */
+};
+
+
+/*
+ * LEDs subdevice platform data
+ */
+
+#define FLAG_ID_ADP5520_LED1_ADP5501_LED0 	1	/* ADP5520 PIN ILED */
+#define FLAG_ID_ADP5520_LED2_ADP5501_LED1 	2	/* ADP5520 PIN C3 */
+#define FLAG_ID_ADP5520_LED3_ADP5501_LED2 	3	/* ADP5520 PIN R3 */
+
+#define ADP5520_LED_DIS_BLINK	(0 << ADP5520_FLAG_OFFT_SHIFT)
+#define ADP5520_LED_OFFT_600ms	(1 << ADP5520_FLAG_OFFT_SHIFT)
+#define ADP5520_LED_OFFT_800ms	(2 << ADP5520_FLAG_OFFT_SHIFT)
+#define ADP5520_LED_OFFT_1200ms	(3 << ADP5520_FLAG_OFFT_SHIFT)
+
+#define ADP5520_LED_ONT_200ms	0
+#define ADP5520_LED_ONT_600ms	1
+#define ADP5520_LED_ONT_800ms	2
+#define ADP5520_LED_ONT_1200ms	3
+
+struct adp5520_leds_platform_data {
+	int num_leds;
+	struct led_info	*leds;
+	u8 fade_in;		/* Backlight Fade-In Timer */
+	u8 fade_out;		/* Backlight Fade-Out Timer */
+	u8 led_on_time;
+};
+
+/*
+ * Backlight subdevice platform data
+ */
+
+#define ADP5520_FADE_T_DIS	0	/* Fade Timer Disabled */
+#define ADP5520_FADE_T_300ms	1	/* 0.3 Sec */
+#define ADP5520_FADE_T_600ms	2
+#define ADP5520_FADE_T_900ms	3
+#define ADP5520_FADE_T_1200ms	4
+#define ADP5520_FADE_T_1500ms	5
+#define ADP5520_FADE_T_1800ms	6
+#define ADP5520_FADE_T_2100ms	7
+#define ADP5520_FADE_T_2400ms	8
+#define ADP5520_FADE_T_2700ms	9
+#define ADP5520_FADE_T_3000ms	10
+#define ADP5520_FADE_T_3500ms	11
+#define ADP5520_FADE_T_4000ms	12
+#define ADP5520_FADE_T_4500ms	13
+#define ADP5520_FADE_T_5000ms	14
+#define ADP5520_FADE_T_5500ms	15	/* 5.5 Sec */
+
+#define ADP5520_BL_LAW_LINEAR 	0
+#define ADP5520_BL_LAW_SQUARE 	1
+#define ADP5520_BL_LAW_CUBIC1 	2
+#define ADP5520_BL_LAW_CUBIC2 	3
+
+#define ADP5520_BL_AMBL_FILT_80ms 	0	/* Light sensor filter time */
+#define ADP5520_BL_AMBL_FILT_160ms 	1
+#define ADP5520_BL_AMBL_FILT_320ms 	2
+#define ADP5520_BL_AMBL_FILT_640ms 	3
+#define ADP5520_BL_AMBL_FILT_1280ms 	4
+#define ADP5520_BL_AMBL_FILT_2560ms 	5
+#define ADP5520_BL_AMBL_FILT_5120ms 	6
+#define ADP5520_BL_AMBL_FILT_10240ms 	7	/* 10.24 sec */
+
+	/*
+	 * Blacklight current 0..30mA
+	 */
+#define ADP5520_BL_CUR_mA(I)		((I * 127) / 30)
+
+	/*
+	 * L2 comparator current 0..1000uA
+	 */
+#define ADP5520_L2_COMP_CURR_uA(I)	((I * 255) / 1000)
+
+	/*
+	 * L3 comparator current 0..127uA
+	 */
+#define ADP5520_L3_COMP_CURR_uA(I)	((I * 255) / 127)
+
+struct adp5520_backlight_platform_data {
+	u8 fade_in;		/* Backlight Fade-In Timer */
+	u8 fade_out;		/* Backlight Fade-Out Timer */
+	u8 fade_led_law;	/* fade-on/fade-off transfer characteristic */
+
+	u8 en_ambl_sens;	/* 1 = enable ambient light sensor */
+	u8 abml_filt;		/* Light sensor filter time */
+	u8 l1_daylight_max;	/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	u8 l1_daylight_dim;	/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	u8 l2_office_max;	/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	u8 l2_office_dim;	/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	u8 l3_dark_max;		/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	u8 l3_dark_dim;		/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	u8 l2_trip;		/* use L2_COMP_CURR_uA(I) 0 <= I <= 1000 uA */
+	u8 l2_hyst;		/* use L2_COMP_CURR_uA(I) 0 <= I <= 1000 uA */
+	u8 l3_trip;		/* use L3_COMP_CURR_uA(I) 0 <= I <= 127 uA */
+	u8 l3_hyst;		/* use L3_COMP_CURR_uA(I) 0 <= I <= 127 uA */
+};
+
+/*
+ * MFD chip platform data
+ */
+
+struct adp5520_platform_data {
+	struct adp5520_keys_platform_data *keys;
+	struct adp5520_gpio_platform_data *gpio;
+	struct adp5520_leds_platform_data *leds;
+	struct adp5520_backlight_platform_data *backlight;
+};
+
+/*
+ * MFD chip functions
+ */
+
+extern int adp5520_read(struct device *dev, int reg, uint8_t *val);
+extern int adp5520_write(struct device *dev, int reg, u8 val);
+extern int adp5520_clr_bits(struct device *dev, int reg, uint8_t bit_mask);
+extern int adp5520_set_bits(struct device *dev, int reg, uint8_t bit_mask);
+
+extern int adp5520_register_notifier(struct device *dev,
+		 struct notifier_block *nb, unsigned int events);
+
+extern int adp5520_unregister_notifier(struct device *dev,
+		struct notifier_block *nb, unsigned int events);
+
+#endif /* __LINUX_MFD_ADP5520_H */
diff --git a/include/linux/mfd/anatop.h b/include/linux/mfd/anatop.h
new file mode 100644
index 00000000..22c1007d
--- /dev/null
+++ b/include/linux/mfd/anatop.h
@@ -0,0 +1,40 @@
+/*
+ * anatop.h - Anatop MFD driver
+ *
+ *  Copyright (C) 2012 Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
+ *  Copyright (C) 2012 Linaro
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_MFD_ANATOP_H
+#define __LINUX_MFD_ANATOP_H
+
+#include <linux/spinlock.h>
+
+/**
+ * anatop - MFD data
+ * @ioreg: ioremap register
+ * @reglock: spinlock for register read/write
+ */
+struct anatop {
+	void *ioreg;
+	spinlock_t reglock;
+};
+
+extern u32 anatop_get_bits(struct anatop *, u32, int, int);
+extern void anatop_set_bits(struct anatop *, u32, int, int, u32);
+
+#endif /*  __LINUX_MFD_ANATOP_H */
diff --git a/include/linux/mfd/asic3.h b/include/linux/mfd/asic3.h
new file mode 100644
index 00000000..ed793b77
--- /dev/null
+++ b/include/linux/mfd/asic3.h
@@ -0,0 +1,313 @@
+/*
+ * include/linux/mfd/asic3.h
+ *
+ * Compaq ASIC3 headers.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Copyright 2001 Compaq Computer Corporation.
+ * Copyright 2007-2008 OpenedHand Ltd.
+ */
+
+#ifndef __ASIC3_H__
+#define __ASIC3_H__
+
+#include <linux/types.h>
+
+struct led_classdev;
+struct asic3_led {
+	const char	*name;
+	const char	*default_trigger;
+	struct led_classdev *cdev;
+};
+
+struct asic3_platform_data {
+	u16 *gpio_config;
+	unsigned int gpio_config_num;
+
+	unsigned int irq_base;
+
+	unsigned int gpio_base;
+
+	struct asic3_led *leds;
+};
+
+#define ASIC3_NUM_GPIO_BANKS	4
+#define ASIC3_GPIOS_PER_BANK	16
+#define ASIC3_NUM_GPIOS		64
+#define ASIC3_NR_IRQS		ASIC3_NUM_GPIOS + 6
+
+#define ASIC3_IRQ_LED0		64
+#define ASIC3_IRQ_LED1		65
+#define ASIC3_IRQ_LED2		66
+#define ASIC3_IRQ_SPI		67
+#define ASIC3_IRQ_SMBUS		68
+#define ASIC3_IRQ_OWM		69
+
+#define ASIC3_TO_GPIO(gpio) (NR_BUILTIN_GPIO + (gpio))
+
+#define ASIC3_GPIO_BANK_A	0
+#define ASIC3_GPIO_BANK_B	1
+#define ASIC3_GPIO_BANK_C	2
+#define ASIC3_GPIO_BANK_D	3
+
+#define ASIC3_GPIO(bank, gpio) \
+	((ASIC3_GPIOS_PER_BANK * ASIC3_GPIO_BANK_##bank) + (gpio))
+#define ASIC3_GPIO_bit(gpio) (1 << (gpio & 0xf))
+/* All offsets below are specified with this address bus shift */
+#define ASIC3_DEFAULT_ADDR_SHIFT 2
+
+#define ASIC3_OFFSET(base, reg) (ASIC3_##base##_BASE + ASIC3_##base##_##reg)
+#define ASIC3_GPIO_OFFSET(base, reg) \
+	(ASIC3_GPIO_##base##_BASE + ASIC3_GPIO_##reg)
+
+#define ASIC3_GPIO_A_BASE      0x0000
+#define ASIC3_GPIO_B_BASE      0x0100
+#define ASIC3_GPIO_C_BASE      0x0200
+#define ASIC3_GPIO_D_BASE      0x0300
+
+#define ASIC3_GPIO_TO_BANK(gpio) ((gpio) >> 4)
+#define ASIC3_GPIO_TO_BIT(gpio)  ((gpio) - \
+				  (ASIC3_GPIOS_PER_BANK * ((gpio) >> 4)))
+#define ASIC3_GPIO_TO_MASK(gpio) (1 << ASIC3_GPIO_TO_BIT(gpio))
+#define ASIC3_GPIO_TO_BASE(gpio) (ASIC3_GPIO_A_BASE + (((gpio) >> 4) * 0x0100))
+#define ASIC3_BANK_TO_BASE(bank) (ASIC3_GPIO_A_BASE + ((bank) * 0x100))
+
+#define ASIC3_GPIO_MASK          0x00    /* R/W 0:don't mask */
+#define ASIC3_GPIO_DIRECTION     0x04    /* R/W 0:input */
+#define ASIC3_GPIO_OUT           0x08    /* R/W 0:output low */
+#define ASIC3_GPIO_TRIGGER_TYPE  0x0c    /* R/W 0:level */
+#define ASIC3_GPIO_EDGE_TRIGGER  0x10    /* R/W 0:falling */
+#define ASIC3_GPIO_LEVEL_TRIGGER 0x14    /* R/W 0:low level detect */
+#define ASIC3_GPIO_SLEEP_MASK    0x18    /* R/W 0:don't mask in sleep mode */
+#define ASIC3_GPIO_SLEEP_OUT     0x1c    /* R/W level 0:low in sleep mode */
+#define ASIC3_GPIO_BAT_FAULT_OUT 0x20    /* R/W level 0:low in batt_fault */
+#define ASIC3_GPIO_INT_STATUS    0x24    /* R/W 0:none, 1:detect */
+#define ASIC3_GPIO_ALT_FUNCTION  0x28	 /* R/W 1:LED register control */
+#define ASIC3_GPIO_SLEEP_CONF    0x2c    /*
+					  * R/W bit 1: autosleep
+					  * 0: disable gposlpout in normal mode,
+					  * enable gposlpout in sleep mode.
+					  */
+#define ASIC3_GPIO_STATUS        0x30    /* R   Pin status */
+
+/*
+ * ASIC3 GPIO config
+ *
+ * Bits 0..6   gpio number
+ * Bits 7..13  Alternate function
+ * Bit  14     Direction
+ * Bit  15     Initial value
+ *
+ */
+#define ASIC3_CONFIG_GPIO_PIN(config) ((config) & 0x7f)
+#define ASIC3_CONFIG_GPIO_ALT(config)  (((config) & (0x7f << 7)) >> 7)
+#define ASIC3_CONFIG_GPIO_DIR(config)  ((config & (1 << 14)) >> 14)
+#define ASIC3_CONFIG_GPIO_INIT(config) ((config & (1 << 15)) >> 15)
+#define ASIC3_CONFIG_GPIO(gpio, alt, dir, init) (((gpio) & 0x7f) \
+	| (((alt) & 0x7f) << 7) | (((dir) & 0x1) << 14) \
+	| (((init) & 0x1) << 15))
+#define ASIC3_CONFIG_GPIO_DEFAULT(gpio, dir, init) \
+	ASIC3_CONFIG_GPIO((gpio), 0, (dir), (init))
+#define ASIC3_CONFIG_GPIO_DEFAULT_OUT(gpio, init) \
+	ASIC3_CONFIG_GPIO((gpio), 0, 1, (init))
+
+/*
+ * Alternate functions
+ */
+#define ASIC3_GPIOA11_PWM0		ASIC3_CONFIG_GPIO(11, 1, 1, 0)
+#define ASIC3_GPIOA12_PWM1		ASIC3_CONFIG_GPIO(12, 1, 1, 0)
+#define ASIC3_GPIOA15_CONTROL_CX	ASIC3_CONFIG_GPIO(15, 1, 1, 0)
+#define ASIC3_GPIOC0_LED0		ASIC3_CONFIG_GPIO(32, 1, 0, 0)
+#define ASIC3_GPIOC1_LED1		ASIC3_CONFIG_GPIO(33, 1, 0, 0)
+#define ASIC3_GPIOC2_LED2		ASIC3_CONFIG_GPIO(34, 1, 0, 0)
+#define ASIC3_GPIOC3_SPI_RXD		ASIC3_CONFIG_GPIO(35, 1, 0, 0)
+#define ASIC3_GPIOC4_CF_nCD		ASIC3_CONFIG_GPIO(36, 1, 0, 0)
+#define ASIC3_GPIOC4_SPI_TXD		ASIC3_CONFIG_GPIO(36, 1, 1, 0)
+#define ASIC3_GPIOC5_SPI_CLK		ASIC3_CONFIG_GPIO(37, 1, 1, 0)
+#define ASIC3_GPIOC5_nCIOW		ASIC3_CONFIG_GPIO(37, 1, 1, 0)
+#define ASIC3_GPIOC6_nCIOR		ASIC3_CONFIG_GPIO(38, 1, 1, 0)
+#define ASIC3_GPIOC7_nPCE_1		ASIC3_CONFIG_GPIO(39, 1, 0, 0)
+#define ASIC3_GPIOC8_nPCE_2		ASIC3_CONFIG_GPIO(40, 1, 0, 0)
+#define ASIC3_GPIOC9_nPOE		ASIC3_CONFIG_GPIO(41, 1, 0, 0)
+#define ASIC3_GPIOC10_nPWE		ASIC3_CONFIG_GPIO(42, 1, 0, 0)
+#define ASIC3_GPIOC11_PSKTSEL		ASIC3_CONFIG_GPIO(43, 1, 0, 0)
+#define ASIC3_GPIOC12_nPREG		ASIC3_CONFIG_GPIO(44, 1, 0, 0)
+#define ASIC3_GPIOC13_nPWAIT		ASIC3_CONFIG_GPIO(45, 1, 1, 0)
+#define ASIC3_GPIOC14_nPIOIS16		ASIC3_CONFIG_GPIO(46, 1, 1, 0)
+#define ASIC3_GPIOC15_nPIOR		ASIC3_CONFIG_GPIO(47, 1, 0, 0)
+#define ASIC3_GPIOD11_nCIOIS16		ASIC3_CONFIG_GPIO(59, 1, 0, 0)
+#define ASIC3_GPIOD12_nCWAIT		ASIC3_CONFIG_GPIO(60, 1, 0, 0)
+#define ASIC3_GPIOD15_nPIOW		ASIC3_CONFIG_GPIO(63, 1, 0, 0)
+
+
+#define ASIC3_SPI_Base		      0x0400
+#define ASIC3_SPI_Control               0x0000
+#define ASIC3_SPI_TxData                0x0004
+#define ASIC3_SPI_RxData                0x0008
+#define ASIC3_SPI_Int                   0x000c
+#define ASIC3_SPI_Status                0x0010
+
+#define SPI_CONTROL_SPR(clk)      ((clk) & 0x0f)  /* Clock rate */
+
+#define ASIC3_PWM_0_Base                0x0500
+#define ASIC3_PWM_1_Base                0x0600
+#define ASIC3_PWM_TimeBase              0x0000
+#define ASIC3_PWM_PeriodTime            0x0004
+#define ASIC3_PWM_DutyTime              0x0008
+
+#define PWM_TIMEBASE_VALUE(x)    ((x)&0xf)   /* Low 4 bits sets time base */
+#define PWM_TIMEBASE_ENABLE     (1 << 4)   /* Enable clock */
+
+#define ASIC3_NUM_LEDS                  3
+#define ASIC3_LED_0_Base                0x0700
+#define ASIC3_LED_1_Base                0x0800
+#define ASIC3_LED_2_Base 		      0x0900
+#define ASIC3_LED_TimeBase              0x0000    /* R/W  7 bits */
+#define ASIC3_LED_PeriodTime            0x0004    /* R/W 12 bits */
+#define ASIC3_LED_DutyTime              0x0008    /* R/W 12 bits */
+#define ASIC3_LED_AutoStopCount         0x000c    /* R/W 16 bits */
+
+/* LED TimeBase bits - match ASIC2 */
+#define LED_TBS		0x0f /* Low 4 bits sets time base, max = 13 */
+			     /* Note: max = 5 on hx4700	*/
+			     /* 0: maximum time base */
+			     /* 1: maximum time base / 2 */
+			     /* n: maximum time base / 2^n */
+
+#define LED_EN		(1 << 4) /* LED ON/OFF 0:off, 1:on */
+#define LED_AUTOSTOP	(1 << 5) /* LED ON/OFF auto stop 0:disable, 1:enable */
+#define LED_ALWAYS	(1 << 6) /* LED Interrupt Mask 0:No mask, 1:mask */
+
+#define ASIC3_CLOCK_BASE	   0x0A00
+#define ASIC3_CLOCK_CDEX           0x00
+#define ASIC3_CLOCK_SEL            0x04
+
+#define CLOCK_CDEX_SOURCE       (1 << 0)  /* 2 bits */
+#define CLOCK_CDEX_SOURCE0      (1 << 0)
+#define CLOCK_CDEX_SOURCE1      (1 << 1)
+#define CLOCK_CDEX_SPI          (1 << 2)
+#define CLOCK_CDEX_OWM          (1 << 3)
+#define CLOCK_CDEX_PWM0         (1 << 4)
+#define CLOCK_CDEX_PWM1         (1 << 5)
+#define CLOCK_CDEX_LED0         (1 << 6)
+#define CLOCK_CDEX_LED1         (1 << 7)
+#define CLOCK_CDEX_LED2         (1 << 8)
+
+/* Clocks settings: 1 for 24.576 MHz, 0 for 12.288Mhz */
+#define CLOCK_CDEX_SD_HOST      (1 << 9)   /* R/W: SD host clock source */
+#define CLOCK_CDEX_SD_BUS       (1 << 10)  /* R/W: SD bus clock source ctrl */
+#define CLOCK_CDEX_SMBUS        (1 << 11)
+#define CLOCK_CDEX_CONTROL_CX   (1 << 12)
+
+#define CLOCK_CDEX_EX0          (1 << 13)  /* R/W: 32.768 kHz crystal */
+#define CLOCK_CDEX_EX1          (1 << 14)  /* R/W: 24.576 MHz crystal */
+
+#define CLOCK_SEL_SD_HCLK_SEL   (1 << 0)   /* R/W: SDIO host clock select */
+#define CLOCK_SEL_SD_BCLK_SEL   (1 << 1)   /* R/W: SDIO bus clock select */
+
+/* R/W: INT clock source control (32.768 kHz) */
+#define CLOCK_SEL_CX            (1 << 2)
+
+
+#define ASIC3_INTR_BASE		0x0B00
+
+#define ASIC3_INTR_INT_MASK       0x00  /* Interrupt mask control */
+#define ASIC3_INTR_P_INT_STAT     0x04  /* Peripheral interrupt status */
+#define ASIC3_INTR_INT_CPS        0x08  /* Interrupt timer clock pre-scale */
+#define ASIC3_INTR_INT_TBS        0x0c  /* Interrupt timer set */
+
+#define ASIC3_INTMASK_GINTMASK    (1 << 0)  /* Global INTs mask 1:enable */
+#define ASIC3_INTMASK_GINTEL      (1 << 1)  /* 1: rising edge, 0: hi level */
+#define ASIC3_INTMASK_MASK0       (1 << 2)
+#define ASIC3_INTMASK_MASK1       (1 << 3)
+#define ASIC3_INTMASK_MASK2       (1 << 4)
+#define ASIC3_INTMASK_MASK3       (1 << 5)
+#define ASIC3_INTMASK_MASK4       (1 << 6)
+#define ASIC3_INTMASK_MASK5       (1 << 7)
+
+#define ASIC3_INTR_PERIPHERAL_A   (1 << 0)
+#define ASIC3_INTR_PERIPHERAL_B   (1 << 1)
+#define ASIC3_INTR_PERIPHERAL_C   (1 << 2)
+#define ASIC3_INTR_PERIPHERAL_D   (1 << 3)
+#define ASIC3_INTR_LED0           (1 << 4)
+#define ASIC3_INTR_LED1           (1 << 5)
+#define ASIC3_INTR_LED2           (1 << 6)
+#define ASIC3_INTR_SPI            (1 << 7)
+#define ASIC3_INTR_SMBUS          (1 << 8)
+#define ASIC3_INTR_OWM            (1 << 9)
+
+#define ASIC3_INTR_CPS(x)         ((x)&0x0f)    /* 4 bits, max 14 */
+#define ASIC3_INTR_CPS_SET        (1 << 4)    /* Time base enable */
+
+
+/* Basic control of the SD ASIC */
+#define ASIC3_SDHWCTRL_BASE     0x0E00
+#define ASIC3_SDHWCTRL_SDCONF     0x00
+
+#define ASIC3_SDHWCTRL_SUSPEND    (1 << 0)  /* 1=suspend all SD operations */
+#define ASIC3_SDHWCTRL_CLKSEL     (1 << 1)  /* 1=SDICK, 0=HCLK */
+#define ASIC3_SDHWCTRL_PCLR       (1 << 2)  /* All registers of SDIO cleared */
+#define ASIC3_SDHWCTRL_LEVCD      (1 << 3)  /* SD card detection: 0:low */
+
+/* SD card write protection: 0=high */
+#define ASIC3_SDHWCTRL_LEVWP      (1 << 4)
+#define ASIC3_SDHWCTRL_SDLED      (1 << 5)  /* SD card LED signal 0=disable */
+
+/* SD card power supply ctrl 1=enable */
+#define ASIC3_SDHWCTRL_SDPWR      (1 << 6)
+
+#define ASIC3_EXTCF_BASE        0x1100
+
+#define ASIC3_EXTCF_SELECT        0x00
+#define ASIC3_EXTCF_RESET         0x04
+
+#define ASIC3_EXTCF_SMOD0	         (1 << 0)  /* slot number of mode 0 */
+#define ASIC3_EXTCF_SMOD1	         (1 << 1)  /* slot number of mode 1 */
+#define ASIC3_EXTCF_SMOD2	         (1 << 2)  /* slot number of mode 2 */
+#define ASIC3_EXTCF_OWM_EN	         (1 << 4)  /* enable onewire module */
+#define ASIC3_EXTCF_OWM_SMB	         (1 << 5)  /* OWM bus selection */
+#define ASIC3_EXTCF_OWM_RESET            (1 << 6)  /* ?? used by OWM and CF */
+#define ASIC3_EXTCF_CF0_SLEEP_MODE       (1 << 7)  /* CF0 sleep state */
+#define ASIC3_EXTCF_CF1_SLEEP_MODE       (1 << 8)  /* CF1 sleep state */
+#define ASIC3_EXTCF_CF0_PWAIT_EN         (1 << 10) /* CF0 PWAIT_n control */
+#define ASIC3_EXTCF_CF1_PWAIT_EN         (1 << 11) /* CF1 PWAIT_n control */
+#define ASIC3_EXTCF_CF0_BUF_EN           (1 << 12) /* CF0 buffer control */
+#define ASIC3_EXTCF_CF1_BUF_EN           (1 << 13) /* CF1 buffer control */
+#define ASIC3_EXTCF_SD_MEM_ENABLE        (1 << 14)
+#define ASIC3_EXTCF_CF_SLEEP             (1 << 15) /* CF sleep mode control */
+
+/*********************************************
+ *  The Onewire interface (DS1WM) is handled
+ *  by the ds1wm driver.
+ *
+ *********************************************/
+
+#define ASIC3_OWM_BASE		0xC00
+
+/*****************************************************************************
+ *  The SD configuration registers are at a completely different location
+ *  in memory.  They are divided into three sets of registers:
+ *
+ *  SD_CONFIG         Core configuration register
+ *  SD_CTRL           Control registers for SD operations
+ *  SDIO_CTRL         Control registers for SDIO operations
+ *
+ *****************************************************************************/
+#define ASIC3_SD_CONFIG_BASE	0x0400 /* Assumes 32 bit addressing */
+#define ASIC3_SD_CONFIG_SIZE	0x0200 /* Assumes 32 bit addressing */
+#define ASIC3_SD_CTRL_BASE	0x1000
+#define ASIC3_SDIO_CTRL_BASE	0x1200
+
+#define ASIC3_MAP_SIZE_32BIT	0x2000
+#define ASIC3_MAP_SIZE_16BIT	0x1000
+
+/* Functions needed by leds-asic3 */
+
+struct asic3;
+extern void asic3_write_register(struct asic3 *asic, unsigned int reg, u32 val);
+extern u32 asic3_read_register(struct asic3 *asic, unsigned int reg);
+
+#endif /* __ASIC3_H__ */
diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h
new file mode 100644
index 00000000..4e76163d
--- /dev/null
+++ b/include/linux/mfd/core.h
@@ -0,0 +1,100 @@
+/*
+ * drivers/mfd/mfd-core.h
+ *
+ * core MFD support
+ * Copyright (c) 2006 Ian Molton
+ * Copyright (c) 2007 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef MFD_CORE_H
+#define MFD_CORE_H
+
+#include <linux/platform_device.h>
+
+/*
+ * This struct describes the MFD part ("cell").
+ * After registration the copy of this structure will become the platform data
+ * of the resulting platform_device
+ */
+struct mfd_cell {
+	const char		*name;
+	int			id;
+
+	/* refcounting for multiple drivers to use a single cell */
+	atomic_t		*usage_count;
+	int			(*enable)(struct platform_device *dev);
+	int			(*disable)(struct platform_device *dev);
+
+	int			(*suspend)(struct platform_device *dev);
+	int			(*resume)(struct platform_device *dev);
+
+	/* platform data passed to the sub devices drivers */
+	void			*platform_data;
+	size_t			pdata_size;
+
+	/*
+	 * These resources can be specified relative to the parent device.
+	 * For accessing hardware you should use resources from the platform dev
+	 */
+	int			num_resources;
+	const struct resource	*resources;
+
+	/* don't check for resource conflicts */
+	bool			ignore_resource_conflicts;
+
+	/*
+	 * Disable runtime PM callbacks for this subdevice - see
+	 * pm_runtime_no_callbacks().
+	 */
+	bool			pm_runtime_no_callbacks;
+};
+
+/*
+ * Convenience functions for clients using shared cells.  Refcounting
+ * happens automatically, with the cell's enable/disable callbacks
+ * being called only when a device is first being enabled or no other
+ * clients are making use of it.
+ */
+extern int mfd_cell_enable(struct platform_device *pdev);
+extern int mfd_cell_disable(struct platform_device *pdev);
+
+/*
+ * "Clone" multiple platform devices for a single cell. This is to be used
+ * for devices that have multiple users of a cell.  For example, if an mfd
+ * driver wants the cell "foo" to be used by a GPIO driver, an MTD driver,
+ * and a platform driver, the following bit of code would be use after first
+ * calling mfd_add_devices():
+ *
+ * const char *fclones[] = { "foo-gpio", "foo-mtd" };
+ * err = mfd_clone_cells("foo", fclones, ARRAY_SIZE(fclones));
+ *
+ * Each driver (MTD, GPIO, and platform driver) would then register
+ * platform_drivers for "foo-mtd", "foo-gpio", and "foo", respectively.
+ * The cell's .enable/.disable hooks should be used to deal with hardware
+ * resource contention.
+ */
+extern int mfd_clone_cell(const char *cell, const char **clones,
+		size_t n_clones);
+
+/*
+ * Given a platform device that's been created by mfd_add_devices(), fetch
+ * the mfd_cell that created it.
+ */
+static inline const struct mfd_cell *mfd_get_cell(struct platform_device *pdev)
+{
+	return pdev->mfd_cell;
+}
+
+extern int mfd_add_devices(struct device *parent, int id,
+			   struct mfd_cell *cells, int n_devs,
+			   struct resource *mem_base,
+			   int irq_base);
+
+extern void mfd_remove_devices(struct device *parent);
+
+#endif
diff --git a/include/linux/mfd/da903x.h b/include/linux/mfd/da903x.h
new file mode 100644
index 00000000..0aa3a1a4
--- /dev/null
+++ b/include/linux/mfd/da903x.h
@@ -0,0 +1,247 @@
+#ifndef __LINUX_PMIC_DA903X_H
+#define __LINUX_PMIC_DA903X_H
+
+/* Unified sub device IDs for DA9030/DA9034/DA9035 */
+enum {
+	DA9030_ID_LED_1,
+	DA9030_ID_LED_2,
+	DA9030_ID_LED_3,
+	DA9030_ID_LED_4,
+	DA9030_ID_LED_PC,
+	DA9030_ID_VIBRA,
+	DA9030_ID_WLED,
+	DA9030_ID_BUCK1,
+	DA9030_ID_BUCK2,
+	DA9030_ID_LDO1,
+	DA9030_ID_LDO2,
+	DA9030_ID_LDO3,
+	DA9030_ID_LDO4,
+	DA9030_ID_LDO5,
+	DA9030_ID_LDO6,
+	DA9030_ID_LDO7,
+	DA9030_ID_LDO8,
+	DA9030_ID_LDO9,
+	DA9030_ID_LDO10,
+	DA9030_ID_LDO11,
+	DA9030_ID_LDO12,
+	DA9030_ID_LDO13,
+	DA9030_ID_LDO14,
+	DA9030_ID_LDO15,
+	DA9030_ID_LDO16,
+	DA9030_ID_LDO17,
+	DA9030_ID_LDO18,
+	DA9030_ID_LDO19,
+	DA9030_ID_LDO_INT,	/* LDO Internal */
+	DA9030_ID_BAT,		/* battery charger */
+
+	DA9034_ID_LED_1,
+	DA9034_ID_LED_2,
+	DA9034_ID_VIBRA,
+	DA9034_ID_WLED,
+	DA9034_ID_TOUCH,
+
+	DA9034_ID_BUCK1,
+	DA9034_ID_BUCK2,
+	DA9034_ID_LDO1,
+	DA9034_ID_LDO2,
+	DA9034_ID_LDO3,
+	DA9034_ID_LDO4,
+	DA9034_ID_LDO5,
+	DA9034_ID_LDO6,
+	DA9034_ID_LDO7,
+	DA9034_ID_LDO8,
+	DA9034_ID_LDO9,
+	DA9034_ID_LDO10,
+	DA9034_ID_LDO11,
+	DA9034_ID_LDO12,
+	DA9034_ID_LDO13,
+	DA9034_ID_LDO14,
+	DA9034_ID_LDO15,
+
+	DA9035_ID_BUCK3,
+};
+
+/*
+ * DA9030/DA9034 LEDs sub-devices uses generic "struct led_info"
+ * as the platform_data
+ */
+
+/* DA9030 flags for "struct led_info"
+ */
+#define DA9030_LED_RATE_ON	(0 << 5)
+#define DA9030_LED_RATE_052S	(1 << 5)
+#define DA9030_LED_DUTY_1_16	(0 << 3)
+#define DA9030_LED_DUTY_1_8	(1 << 3)
+#define DA9030_LED_DUTY_1_4	(2 << 3)
+#define DA9030_LED_DUTY_1_2	(3 << 3)
+
+#define DA9030_VIBRA_MODE_1P3V	(0 << 1)
+#define DA9030_VIBRA_MODE_2P7V	(1 << 1)
+#define DA9030_VIBRA_FREQ_1HZ	(0 << 2)
+#define DA9030_VIBRA_FREQ_2HZ	(1 << 2)
+#define DA9030_VIBRA_FREQ_4HZ	(2 << 2)
+#define DA9030_VIBRA_FREQ_8HZ	(3 << 2)
+#define DA9030_VIBRA_DUTY_ON	(0 << 4)
+#define DA9030_VIBRA_DUTY_75P	(1 << 4)
+#define DA9030_VIBRA_DUTY_50P	(2 << 4)
+#define DA9030_VIBRA_DUTY_25P	(3 << 4)
+
+/* DA9034 flags for "struct led_info" */
+#define DA9034_LED_RAMP		(1 << 7)
+
+/* DA9034 touch screen platform data */
+struct da9034_touch_pdata {
+	int	interval_ms;	/* sampling interval while pen down */
+	int	x_inverted;
+	int	y_inverted;
+};
+
+struct da9034_backlight_pdata {
+	int	output_current;	/* output current of WLED, from 0-31 (in mA) */
+};
+
+/* DA9030 battery charger data */
+struct power_supply_info;
+
+struct da9030_battery_info {
+	/* battery parameters */
+	struct power_supply_info *battery_info;
+
+	/* current and voltage to use for battery charging */
+	unsigned int charge_milliamp;
+	unsigned int charge_millivolt;
+
+	/* voltage thresholds (in millivolts) */
+	int vbat_low;
+	int vbat_crit;
+	int vbat_charge_start;
+	int vbat_charge_stop;
+	int vbat_charge_restart;
+
+	/* battery nominal minimal and maximal voltages in millivolts */
+	int vcharge_min;
+	int vcharge_max;
+
+	/* Temperature thresholds. These are DA9030 register values
+	   "as is" and should be measured for each battery type */
+	int tbat_low;
+	int tbat_high;
+	int tbat_restart;
+
+
+	/* battery monitor interval (seconds) */
+	unsigned int batmon_interval;
+
+	/* platform callbacks for battery low and critical events */
+	void (*battery_low)(void);
+	void (*battery_critical)(void);
+};
+
+struct da903x_subdev_info {
+	int		id;
+	const char	*name;
+	void		*platform_data;
+};
+
+struct da903x_platform_data {
+	int num_subdevs;
+	struct da903x_subdev_info *subdevs;
+};
+
+/* bit definitions for DA9030 events */
+#define DA9030_EVENT_ONKEY		(1 << 0)
+#define	DA9030_EVENT_PWREN		(1 << 1)
+#define	DA9030_EVENT_EXTON		(1 << 2)
+#define	DA9030_EVENT_CHDET		(1 << 3)
+#define	DA9030_EVENT_TBAT		(1 << 4)
+#define	DA9030_EVENT_VBATMON		(1 << 5)
+#define	DA9030_EVENT_VBATMON_TXON	(1 << 6)
+#define	DA9030_EVENT_CHIOVER		(1 << 7)
+#define	DA9030_EVENT_TCTO		(1 << 8)
+#define	DA9030_EVENT_CCTO		(1 << 9)
+#define	DA9030_EVENT_ADC_READY		(1 << 10)
+#define	DA9030_EVENT_VBUS_4P4		(1 << 11)
+#define	DA9030_EVENT_VBUS_4P0		(1 << 12)
+#define	DA9030_EVENT_SESS_VALID		(1 << 13)
+#define	DA9030_EVENT_SRP_DETECT		(1 << 14)
+#define	DA9030_EVENT_WATCHDOG		(1 << 15)
+#define	DA9030_EVENT_LDO15		(1 << 16)
+#define	DA9030_EVENT_LDO16		(1 << 17)
+#define	DA9030_EVENT_LDO17		(1 << 18)
+#define	DA9030_EVENT_LDO18		(1 << 19)
+#define	DA9030_EVENT_LDO19		(1 << 20)
+#define	DA9030_EVENT_BUCK2		(1 << 21)
+
+/* bit definitions for DA9034 events */
+#define DA9034_EVENT_ONKEY		(1 << 0)
+#define DA9034_EVENT_EXTON		(1 << 2)
+#define DA9034_EVENT_CHDET		(1 << 3)
+#define DA9034_EVENT_TBAT		(1 << 4)
+#define DA9034_EVENT_VBATMON		(1 << 5)
+#define DA9034_EVENT_REV_IOVER		(1 << 6)
+#define DA9034_EVENT_CH_IOVER		(1 << 7)
+#define DA9034_EVENT_CH_TCTO		(1 << 8)
+#define DA9034_EVENT_CH_CCTO		(1 << 9)
+#define DA9034_EVENT_USB_DEV		(1 << 10)
+#define DA9034_EVENT_OTGCP_IOVER	(1 << 11)
+#define DA9034_EVENT_VBUS_4P55		(1 << 12)
+#define DA9034_EVENT_VBUS_3P8		(1 << 13)
+#define DA9034_EVENT_SESS_1P8		(1 << 14)
+#define DA9034_EVENT_SRP_READY		(1 << 15)
+#define DA9034_EVENT_ADC_MAN		(1 << 16)
+#define DA9034_EVENT_ADC_AUTO4		(1 << 17)
+#define DA9034_EVENT_ADC_AUTO5		(1 << 18)
+#define DA9034_EVENT_ADC_AUTO6		(1 << 19)
+#define DA9034_EVENT_PEN_DOWN		(1 << 20)
+#define DA9034_EVENT_TSI_READY		(1 << 21)
+#define DA9034_EVENT_UART_TX		(1 << 22)
+#define DA9034_EVENT_UART_RX		(1 << 23)
+#define DA9034_EVENT_HEADSET		(1 << 25)
+#define DA9034_EVENT_HOOKSWITCH		(1 << 26)
+#define DA9034_EVENT_WATCHDOG		(1 << 27)
+
+extern int da903x_register_notifier(struct device *dev,
+		struct notifier_block *nb, unsigned int events);
+extern int da903x_unregister_notifier(struct device *dev,
+		struct notifier_block *nb, unsigned int events);
+
+/* Status Query Interface */
+#define DA9030_STATUS_ONKEY		(1 << 0)
+#define DA9030_STATUS_PWREN1		(1 << 1)
+#define DA9030_STATUS_EXTON		(1 << 2)
+#define DA9030_STATUS_CHDET		(1 << 3)
+#define DA9030_STATUS_TBAT		(1 << 4)
+#define DA9030_STATUS_VBATMON		(1 << 5)
+#define DA9030_STATUS_VBATMON_TXON	(1 << 6)
+#define DA9030_STATUS_MCLKDET		(1 << 7)
+
+#define DA9034_STATUS_ONKEY		(1 << 0)
+#define DA9034_STATUS_EXTON		(1 << 2)
+#define DA9034_STATUS_CHDET		(1 << 3)
+#define DA9034_STATUS_TBAT		(1 << 4)
+#define DA9034_STATUS_VBATMON		(1 << 5)
+#define DA9034_STATUS_PEN_DOWN		(1 << 6)
+#define DA9034_STATUS_MCLKDET		(1 << 7)
+#define DA9034_STATUS_USB_DEV		(1 << 8)
+#define DA9034_STATUS_HEADSET		(1 << 9)
+#define DA9034_STATUS_HOOKSWITCH	(1 << 10)
+#define DA9034_STATUS_REMCON		(1 << 11)
+#define DA9034_STATUS_VBUS_VALID_4P55	(1 << 12)
+#define DA9034_STATUS_VBUS_VALID_3P8	(1 << 13)
+#define DA9034_STATUS_SESS_VALID_1P8	(1 << 14)
+#define DA9034_STATUS_SRP_READY		(1 << 15)
+
+extern int da903x_query_status(struct device *dev, unsigned int status);
+
+
+/* NOTE: the functions below are not intended for use outside
+ * of the DA903x sub-device drivers
+ */
+extern int da903x_write(struct device *dev, int reg, uint8_t val);
+extern int da903x_writes(struct device *dev, int reg, int len, uint8_t *val);
+extern int da903x_read(struct device *dev, int reg, uint8_t *val);
+extern int da903x_reads(struct device *dev, int reg, int len, uint8_t *val);
+extern int da903x_update(struct device *dev, int reg, uint8_t val, uint8_t mask);
+extern int da903x_set_bits(struct device *dev, int reg, uint8_t bit_mask);
+extern int da903x_clr_bits(struct device *dev, int reg, uint8_t bit_mask);
+#endif /* __LINUX_PMIC_DA903X_H */
diff --git a/include/linux/mfd/da9052/da9052.h b/include/linux/mfd/da9052/da9052.h
new file mode 100644
index 00000000..7ffbd6e9
--- /dev/null
+++ b/include/linux/mfd/da9052/da9052.h
@@ -0,0 +1,129 @@
+/*
+ * da9052 declarations for DA9052 PMICs.
+ *
+ * Copyright(c) 2011 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __MFD_DA9052_DA9052_H
+#define __MFD_DA9052_DA9052_H
+
+#include <linux/interrupt.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/completion.h>
+#include <linux/list.h>
+#include <linux/mfd/core.h>
+
+#include <linux/mfd/da9052/reg.h>
+
+#define DA9052_IRQ_DCIN	0
+#define DA9052_IRQ_VBUS	1
+#define DA9052_IRQ_DCINREM	2
+#define DA9052_IRQ_VBUSREM	3
+#define DA9052_IRQ_VDDLOW	4
+#define DA9052_IRQ_ALARM	5
+#define DA9052_IRQ_SEQRDY	6
+#define DA9052_IRQ_COMP1V2	7
+#define DA9052_IRQ_NONKEY	8
+#define DA9052_IRQ_IDFLOAT	9
+#define DA9052_IRQ_IDGND	10
+#define DA9052_IRQ_CHGEND	11
+#define DA9052_IRQ_TBAT	12
+#define DA9052_IRQ_ADC_EOM	13
+#define DA9052_IRQ_PENDOWN	14
+#define DA9052_IRQ_TSIREADY	15
+#define DA9052_IRQ_GPI0	16
+#define DA9052_IRQ_GPI1	17
+#define DA9052_IRQ_GPI2	18
+#define DA9052_IRQ_GPI3	19
+#define DA9052_IRQ_GPI4	20
+#define DA9052_IRQ_GPI5	21
+#define DA9052_IRQ_GPI6	22
+#define DA9052_IRQ_GPI7	23
+#define DA9052_IRQ_GPI8	24
+#define DA9052_IRQ_GPI9	25
+#define DA9052_IRQ_GPI10	26
+#define DA9052_IRQ_GPI11	27
+#define DA9052_IRQ_GPI12	28
+#define DA9052_IRQ_GPI13	29
+#define DA9052_IRQ_GPI14	30
+#define DA9052_IRQ_GPI15	31
+
+enum da9052_chip_id {
+	DA9052,
+	DA9053_AA,
+	DA9053_BA,
+	DA9053_BB,
+};
+
+struct da9052_pdata;
+
+struct da9052 {
+	struct device *dev;
+	struct regmap *regmap;
+
+	int irq_base;
+	u8 chip_id;
+
+	int chip_irq;
+};
+
+/* Device I/O API */
+static inline int da9052_reg_read(struct da9052 *da9052, unsigned char reg)
+{
+	int val, ret;
+
+	ret = regmap_read(da9052->regmap, reg, &val);
+	if (ret < 0)
+		return ret;
+	return val;
+}
+
+static inline int da9052_reg_write(struct da9052 *da9052, unsigned char reg,
+				    unsigned char val)
+{
+	return regmap_write(da9052->regmap, reg, val);
+}
+
+static inline int da9052_group_read(struct da9052 *da9052, unsigned char reg,
+				     unsigned reg_cnt, unsigned char *val)
+{
+	return regmap_bulk_read(da9052->regmap, reg, val, reg_cnt);
+}
+
+static inline int da9052_group_write(struct da9052 *da9052, unsigned char reg,
+				      unsigned reg_cnt, unsigned char *val)
+{
+	return regmap_raw_write(da9052->regmap, reg, val, reg_cnt);
+}
+
+static inline int da9052_reg_update(struct da9052 *da9052, unsigned char reg,
+				     unsigned char bit_mask,
+				     unsigned char reg_val)
+{
+	return regmap_update_bits(da9052->regmap, reg, bit_mask, reg_val);
+}
+
+int da9052_device_init(struct da9052 *da9052, u8 chip_id);
+void da9052_device_exit(struct da9052 *da9052);
+
+extern struct regmap_config da9052_regmap_config;
+
+#endif /* __MFD_DA9052_DA9052_H */
diff --git a/include/linux/mfd/da9052/pdata.h b/include/linux/mfd/da9052/pdata.h
new file mode 100644
index 00000000..62c5c3c2
--- /dev/null
+++ b/include/linux/mfd/da9052/pdata.h
@@ -0,0 +1,40 @@
+/*
+ * Platform data declarations for DA9052 PMICs.
+ *
+ * Copyright(c) 2011 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __MFD_DA9052_PDATA_H__
+#define __MFD_DA9052_PDATA_H__
+
+#define DA9052_MAX_REGULATORS	14
+
+struct da9052;
+
+struct da9052_pdata {
+	struct led_platform_data *pled;
+	int (*init) (struct da9052 *da9052);
+	int irq_base;
+	int gpio_base;
+	int use_for_apm;
+	struct regulator_init_data *regulators[DA9052_MAX_REGULATORS];
+};
+
+#endif
diff --git a/include/linux/mfd/da9052/reg.h b/include/linux/mfd/da9052/reg.h
new file mode 100644
index 00000000..b97f7309
--- /dev/null
+++ b/include/linux/mfd/da9052/reg.h
@@ -0,0 +1,749 @@
+/*
+ * Register declarations for DA9052 PMICs.
+ *
+ * Copyright(c) 2011 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __LINUX_MFD_DA9052_REG_H
+#define __LINUX_MFD_DA9052_REG_H
+
+/* PAGE REGISTERS */
+#define DA9052_PAGE0_CON_REG		0
+#define DA9052_PAGE1_CON_REG		128
+
+/* STATUS REGISTERS */
+#define DA9052_STATUS_A_REG		1
+#define DA9052_STATUS_B_REG		2
+#define DA9052_STATUS_C_REG		3
+#define DA9052_STATUS_D_REG		4
+
+/* EVENT REGISTERS */
+#define DA9052_EVENT_A_REG		5
+#define DA9052_EVENT_B_REG		6
+#define DA9052_EVENT_C_REG		7
+#define DA9052_EVENT_D_REG		8
+#define DA9052_FAULTLOG_REG		9
+
+/* IRQ REGISTERS */
+#define DA9052_IRQ_MASK_A_REG		10
+#define DA9052_IRQ_MASK_B_REG		11
+#define DA9052_IRQ_MASK_C_REG		12
+#define DA9052_IRQ_MASK_D_REG		13
+
+/* CONTROL REGISTERS */
+#define DA9052_CONTROL_A_REG		14
+#define DA9052_CONTROL_B_REG		15
+#define DA9052_CONTROL_C_REG		16
+#define DA9052_CONTROL_D_REG		17
+
+#define DA9052_PDDIS_REG		18
+#define DA9052_INTERFACE_REG		19
+#define DA9052_RESET_REG		20
+
+/* GPIO REGISTERS */
+#define DA9052_GPIO_0_1_REG		21
+#define DA9052_GPIO_2_3_REG		22
+#define DA9052_GPIO_4_5_REG		23
+#define DA9052_GPIO_6_7_REG		24
+#define DA9052_GPIO_14_15_REG		28
+
+/* POWER SEQUENCER CONTROL REGISTERS */
+#define DA9052_ID_0_1_REG		29
+#define DA9052_ID_2_3_REG		30
+#define DA9052_ID_4_5_REG		31
+#define DA9052_ID_6_7_REG		32
+#define DA9052_ID_8_9_REG		33
+#define DA9052_ID_10_11_REG		34
+#define DA9052_ID_12_13_REG		35
+#define DA9052_ID_14_15_REG		36
+#define DA9052_ID_16_17_REG		37
+#define DA9052_ID_18_19_REG		38
+#define DA9052_ID_20_21_REG		39
+#define DA9052_SEQ_STATUS_REG		40
+#define DA9052_SEQ_A_REG		41
+#define DA9052_SEQ_B_REG		42
+#define DA9052_SEQ_TIMER_REG		43
+
+/* LDO AND BUCK REGISTERS */
+#define DA9052_BUCKA_REG		44
+#define DA9052_BUCKB_REG		45
+#define DA9052_BUCKCORE_REG		46
+#define DA9052_BUCKPRO_REG		47
+#define DA9052_BUCKMEM_REG		48
+#define DA9052_BUCKPERI_REG		49
+#define DA9052_LDO1_REG		50
+#define DA9052_LDO2_REG		51
+#define DA9052_LDO3_REG		52
+#define DA9052_LDO4_REG		53
+#define DA9052_LDO5_REG		54
+#define DA9052_LDO6_REG		55
+#define DA9052_LDO7_REG		56
+#define DA9052_LDO8_REG		57
+#define DA9052_LDO9_REG		58
+#define DA9052_LDO10_REG		59
+#define DA9052_SUPPLY_REG		60
+#define DA9052_PULLDOWN_REG		61
+#define DA9052_CHGBUCK_REG		62
+#define DA9052_WAITCONT_REG		63
+#define DA9052_ISET_REG		64
+#define DA9052_BATCHG_REG		65
+
+/* BATTERY CONTROL REGISTRS */
+#define DA9052_CHG_CONT_REG		66
+#define DA9052_INPUT_CONT_REG		67
+#define DA9052_CHG_TIME_REG		68
+#define DA9052_BBAT_CONT_REG		69
+
+/* LED CONTROL REGISTERS */
+#define DA9052_BOOST_REG		70
+#define DA9052_LED_CONT_REG		71
+#define DA9052_LEDMIN123_REG		72
+#define DA9052_LED1_CONF_REG		73
+#define DA9052_LED2_CONF_REG		74
+#define DA9052_LED3_CONF_REG		75
+#define DA9052_LED1CONT_REG		76
+#define DA9052_LED2CONT_REG		77
+#define DA9052_LED3CONT_REG		78
+#define DA9052_LED_CONT_4_REG		79
+#define DA9052_LED_CONT_5_REG		80
+
+/* ADC CONTROL REGISTERS */
+#define DA9052_ADC_MAN_REG		81
+#define DA9052_ADC_CONT_REG		82
+#define DA9052_ADC_RES_L_REG		83
+#define DA9052_ADC_RES_H_REG		84
+#define DA9052_VDD_RES_REG		85
+#define DA9052_VDD_MON_REG		86
+
+#define DA9052_ICHG_AV_REG		87
+#define DA9052_ICHG_THD_REG		88
+#define DA9052_ICHG_END_REG		89
+#define DA9052_TBAT_RES_REG		90
+#define DA9052_TBAT_HIGHP_REG		91
+#define DA9052_TBAT_HIGHN_REG		92
+#define DA9052_TBAT_LOW_REG		93
+#define DA9052_T_OFFSET_REG		94
+
+#define DA9052_ADCIN4_RES_REG		95
+#define DA9052_AUTO4_HIGH_REG		96
+#define DA9052_AUTO4_LOW_REG		97
+#define DA9052_ADCIN5_RES_REG		98
+#define DA9052_AUTO5_HIGH_REG		99
+#define DA9052_AUTO5_LOW_REG		100
+#define DA9052_ADCIN6_RES_REG		101
+#define DA9052_AUTO6_HIGH_REG		102
+#define DA9052_AUTO6_LOW_REG		103
+
+#define DA9052_TJUNC_RES_REG		104
+
+/* TSI CONTROL REGISTERS */
+#define DA9052_TSI_CONT_A_REG		105
+#define DA9052_TSI_CONT_B_REG		106
+#define DA9052_TSI_X_MSB_REG		107
+#define DA9052_TSI_Y_MSB_REG		108
+#define DA9052_TSI_LSB_REG		109
+#define DA9052_TSI_Z_MSB_REG		110
+
+/* RTC COUNT REGISTERS */
+#define DA9052_COUNT_S_REG		111
+#define DA9052_COUNT_MI_REG		112
+#define DA9052_COUNT_H_REG		113
+#define DA9052_COUNT_D_REG		114
+#define DA9052_COUNT_MO_REG		115
+#define DA9052_COUNT_Y_REG		116
+
+/* RTC CONTROL REGISTERS */
+#define DA9052_ALARM_MI_REG		117
+#define DA9052_ALARM_H_REG		118
+#define DA9052_ALARM_D_REG		119
+#define DA9052_ALARM_MO_REG		120
+#define DA9052_ALARM_Y_REG		121
+#define DA9052_SECOND_A_REG		122
+#define DA9052_SECOND_B_REG		123
+#define DA9052_SECOND_C_REG		124
+#define DA9052_SECOND_D_REG		125
+
+/* PAGE CONFIGURATION BIT */
+#define DA9052_PAGE_CONF		0X80
+
+/* STATUS REGISTER A BITS */
+#define DA9052_STATUSA_VDATDET		0X80
+#define DA9052_STATUSA_VBUSSEL		0X40
+#define DA9052_STATUSA_DCINSEL		0X20
+#define DA9052_STATUSA_VBUSDET		0X10
+#define DA9052_STATUSA_DCINDET		0X08
+#define DA9052_STATUSA_IDGND		0X04
+#define DA9052_STATUSA_IDFLOAT		0X02
+#define DA9052_STATUSA_NONKEY		0X01
+
+/* STATUS REGISTER B BITS */
+#define DA9052_STATUSB_COMPDET		0X80
+#define DA9052_STATUSB_SEQUENCING	0X40
+#define DA9052_STATUSB_GPFB2		0X20
+#define DA9052_STATUSB_CHGTO		0X10
+#define DA9052_STATUSB_CHGEND		0X08
+#define DA9052_STATUSB_CHGLIM		0X04
+#define DA9052_STATUSB_CHGPRE		0X02
+#define DA9052_STATUSB_CHGATT		0X01
+
+/* STATUS REGISTER C BITS */
+#define DA9052_STATUSC_GPI7		0X80
+#define DA9052_STATUSC_GPI6		0X40
+#define DA9052_STATUSC_GPI5		0X20
+#define DA9052_STATUSC_GPI4		0X10
+#define DA9052_STATUSC_GPI3		0X08
+#define DA9052_STATUSC_GPI2		0X04
+#define DA9052_STATUSC_GPI1		0X02
+#define DA9052_STATUSC_GPI0		0X01
+
+/* STATUS REGISTER D BITS */
+#define DA9052_STATUSD_GPI15		0X80
+#define DA9052_STATUSD_GPI14		0X40
+#define DA9052_STATUSD_GPI13		0X20
+#define DA9052_STATUSD_GPI12		0X10
+#define DA9052_STATUSD_GPI11		0X08
+#define DA9052_STATUSD_GPI10		0X04
+#define DA9052_STATUSD_GPI9		0X02
+#define DA9052_STATUSD_GPI8		0X01
+
+/* EVENT REGISTER A BITS */
+#define DA9052_EVENTA_ECOMP1V2		0X80
+#define DA9052_EVENTA_ESEQRDY		0X40
+#define DA9052_EVENTA_EALRAM		0X20
+#define DA9052_EVENTA_EVDDLOW		0X10
+#define DA9052_EVENTA_EVBUSREM		0X08
+#define DA9052_EVENTA_EDCINREM		0X04
+#define DA9052_EVENTA_EVBUSDET		0X02
+#define DA9052_EVENTA_EDCINDET		0X01
+
+/* EVENT REGISTER B BITS */
+#define DA9052_EVENTB_ETSIREADY	0X80
+#define DA9052_EVENTB_EPENDOWN		0X40
+#define DA9052_EVENTB_EADCEOM		0X20
+#define DA9052_EVENTB_ETBAT		0X10
+#define DA9052_EVENTB_ECHGEND		0X08
+#define DA9052_EVENTB_EIDGND		0X04
+#define DA9052_EVENTB_EIDFLOAT		0X02
+#define DA9052_EVENTB_ENONKEY		0X01
+
+/* EVENT REGISTER C BITS */
+#define DA9052_EVENTC_EGPI7		0X80
+#define DA9052_EVENTC_EGPI6		0X40
+#define DA9052_EVENTC_EGPI5		0X20
+#define DA9052_EVENTC_EGPI4		0X10
+#define DA9052_EVENTC_EGPI3		0X08
+#define DA9052_EVENTC_EGPI2		0X04
+#define DA9052_EVENTC_EGPI1		0X02
+#define DA9052_EVENTC_EGPI0		0X01
+
+/* EVENT REGISTER D BITS */
+#define DA9052_EVENTD_EGPI15		0X80
+#define DA9052_EVENTD_EGPI14		0X40
+#define DA9052_EVENTD_EGPI13		0X20
+#define DA9052_EVENTD_EGPI12		0X10
+#define DA9052_EVENTD_EGPI11		0X08
+#define DA9052_EVENTD_EGPI10		0X04
+#define DA9052_EVENTD_EGPI9		0X02
+#define DA9052_EVENTD_EGPI8		0X01
+
+/* IRQ MASK REGISTERS BITS */
+#define DA9052_M_NONKEY		0X0100
+
+/* TSI EVENT REGISTERS BITS */
+#define DA9052_E_PEN_DOWN		0X4000
+#define DA9052_E_TSI_READY		0X8000
+
+/* FAULT LOG REGISTER BITS */
+#define DA9052_FAULTLOG_WAITSET	0X80
+#define DA9052_FAULTLOG_NSDSET		0X40
+#define DA9052_FAULTLOG_KEYSHUT	0X20
+#define DA9052_FAULTLOG_TEMPOVER	0X08
+#define DA9052_FAULTLOG_VDDSTART	0X04
+#define DA9052_FAULTLOG_VDDFAULT	0X02
+#define DA9052_FAULTLOG_TWDERROR	0X01
+
+/* CONTROL REGISTER A BITS */
+#define DA9052_CONTROLA_GPIV		0X80
+#define DA9052_CONTROLA_PMOTYPE	0X20
+#define DA9052_CONTROLA_PMOV		0X10
+#define DA9052_CONTROLA_PMIV		0X08
+#define DA9052_CONTROLA_PMIFV		0X08
+#define DA9052_CONTROLA_PWR1EN		0X04
+#define DA9052_CONTROLA_PWREN		0X02
+#define DA9052_CONTROLA_SYSEN		0X01
+
+/* CONTROL REGISTER B BITS */
+#define DA9052_CONTROLB_SHUTDOWN	0X80
+#define DA9052_CONTROLB_DEEPSLEEP	0X40
+#define DA9052_CONTROL_B_WRITEMODE	0X20
+#define DA9052_CONTROLB_BBATEN		0X10
+#define DA9052_CONTROLB_OTPREADEN	0X08
+#define DA9052_CONTROLB_AUTOBOOT	0X04
+#define DA9052_CONTROLB_ACTDIODE	0X02
+#define DA9052_CONTROLB_BUCKMERGE	0X01
+
+/* CONTROL REGISTER C BITS */
+#define DA9052_CONTROLC_BLINKDUR	0X80
+#define DA9052_CONTROLC_BLINKFRQ	0X60
+#define DA9052_CONTROLC_DEBOUNCING	0X1C
+#define DA9052_CONTROLC_PMFB2PIN	0X02
+#define DA9052_CONTROLC_PMFB1PIN	0X01
+
+/* CONTROL REGISTER D BITS */
+#define DA9052_CONTROLD_WATCHDOG	0X80
+#define DA9052_CONTROLD_ACCDETEN	0X40
+#define DA9052_CONTROLD_GPI1415SD	0X20
+#define DA9052_CONTROLD_NONKEYSD	0X10
+#define DA9052_CONTROLD_KEEPACTEN	0X08
+#define DA9052_CONTROLD_TWDSCALE	0X07
+
+/* POWER DOWN DISABLE REGISTER BITS */
+#define DA9052_PDDIS_PMCONTPD		0X80
+#define DA9052_PDDIS_OUT32KPD		0X40
+#define DA9052_PDDIS_CHGBBATPD		0X20
+#define DA9052_PDDIS_CHGPD		0X10
+#define DA9052_PDDIS_HS2WIREPD		0X08
+#define DA9052_PDDIS_PMIFPD		0X04
+#define DA9052_PDDIS_GPADCPD		0X02
+#define DA9052_PDDIS_GPIOPD		0X01
+
+/* CONTROL REGISTER D BITS */
+#define DA9052_INTERFACE_IFBASEADDR	0XE0
+#define DA9052_INTERFACE_NCSPOL	0X10
+#define DA9052_INTERFACE_RWPOL		0X08
+#define DA9052_INTERFACE_CPHA		0X04
+#define DA9052_INTERFACE_CPOL		0X02
+#define DA9052_INTERFACE_IFTYPE	0X01
+
+/* CONTROL REGISTER D BITS */
+#define DA9052_RESET_RESETEVENT	0XC0
+#define DA9052_RESET_RESETTIMER	0X3F
+
+/* GPIO REGISTERS */
+/* GPIO CONTROL REGISTER BITS */
+#define DA9052_GPIO_EVEN_PORT_PIN	0X03
+#define DA9052_GPIO_EVEN_PORT_TYPE	0X04
+#define DA9052_GPIO_EVEN_PORT_MODE	0X08
+
+#define DA9052_GPIO_ODD_PORT_PIN	0X30
+#define DA9052_GPIO_ODD_PORT_TYPE	0X40
+#define DA9052_GPIO_ODD_PORT_MODE	0X80
+
+/*POWER SEQUENCER REGISTER BITS */
+/* SEQ CONTROL REGISTER BITS FOR ID 0 AND 1 */
+#define DA9052_ID01_LDO1STEP		0XF0
+#define DA9052_ID01_SYSPRE		0X04
+#define DA9052_ID01_DEFSUPPLY		0X02
+#define DA9052_ID01_NRESMODE		0X01
+
+/* SEQ CONTROL REGISTER BITS FOR ID 2 AND 3 */
+#define DA9052_ID23_LDO3STEP		0XF0
+#define DA9052_ID23_LDO2STEP		0X0F
+
+/* SEQ CONTROL REGISTER BITS FOR ID 4 AND 5 */
+#define DA9052_ID45_LDO5STEP		0XF0
+#define DA9052_ID45_LDO4STEP		0X0F
+
+/* SEQ CONTROL REGISTER BITS FOR ID 6 AND 7 */
+#define DA9052_ID67_LDO7STEP		0XF0
+#define DA9052_ID67_LDO6STEP		0X0F
+
+/* SEQ CONTROL REGISTER BITS FOR ID 8 AND 9 */
+#define DA9052_ID89_LDO9STEP		0XF0
+#define DA9052_ID89_LDO8STEP		0X0F
+
+/* SEQ CONTROL REGISTER BITS FOR ID 10 AND 11 */
+#define DA9052_ID1011_PDDISSTEP	0XF0
+#define DA9052_ID1011_LDO10STEP	0X0F
+
+/* SEQ CONTROL REGISTER BITS FOR ID 12 AND 13 */
+#define DA9052_ID1213_VMEMSWSTEP	0XF0
+#define DA9052_ID1213_VPERISWSTEP	0X0F
+
+/* SEQ CONTROL REGISTER BITS FOR ID 14 AND 15 */
+#define DA9052_ID1415_BUCKPROSTEP	0XF0
+#define DA9052_ID1415_BUCKCORESTEP	0X0F
+
+/* SEQ CONTROL REGISTER BITS FOR ID 16 AND 17 */
+#define DA9052_ID1617_BUCKPERISTEP	0XF0
+#define DA9052_ID1617_BUCKMEMSTEP	0X0F
+
+/* SEQ CONTROL REGISTER BITS FOR ID 18 AND 19 */
+#define DA9052_ID1819_GPRISE2STEP	0XF0
+#define DA9052_ID1819_GPRISE1STEP	0X0F
+
+/* SEQ CONTROL REGISTER BITS FOR ID 20 AND 21 */
+#define DA9052_ID2021_GPFALL2STEP	0XF0
+#define DA9052_ID2021_GPFALL1STEP	0X0F
+
+/* POWER SEQ STATUS REGISTER BITS */
+#define DA9052_SEQSTATUS_SEQPOINTER	0XF0
+#define DA9052_SEQSTATUS_WAITSTEP	0X0F
+
+/* POWER SEQ A REGISTER BITS */
+#define DA9052_SEQA_POWEREND		0XF0
+#define DA9052_SEQA_SYSTEMEND		0X0F
+
+/* POWER SEQ B REGISTER BITS */
+#define DA9052_SEQB_PARTDOWN		0XF0
+#define DA9052_SEQB_MAXCOUNT		0X0F
+
+/* POWER SEQ TIMER REGISTER BITS */
+#define DA9052_SEQTIMER_SEQDUMMY	0XF0
+#define DA9052_SEQTIMER_SEQTIME	0X0F
+
+/*POWER SUPPLY CONTROL REGISTER BITS */
+/* BUCK REGISTER A BITS */
+#define DA9052_BUCKA_BPROILIM		0XC0
+#define DA9052_BUCKA_BPROMODE		0X30
+#define DA9052_BUCKA_BCOREILIM		0X0C
+#define DA9052_BUCKA_BCOREMODE		0X03
+
+/* BUCK REGISTER B BITS */
+#define DA9052_BUCKB_BERIILIM		0XC0
+#define DA9052_BUCKB_BPERIMODE		0X30
+#define DA9052_BUCKB_BMEMILIM		0X0C
+#define DA9052_BUCKB_BMEMMODE		0X03
+
+/* BUCKCORE REGISTER BITS */
+#define DA9052_BUCKCORE_BCORECONF	0X80
+#define DA9052_BUCKCORE_BCOREEN	0X40
+#define DA9052_BUCKCORE_VBCORE		0X3F
+
+/* BUCKPRO REGISTER BITS */
+#define DA9052_BUCKPRO_BPROCONF	0X80
+#define DA9052_BUCKPRO_BPROEN		0X40
+#define DA9052_BUCKPRO_VBPRO		0X3F
+
+/* BUCKMEM REGISTER BITS */
+#define DA9052_BUCKMEM_BMEMCONF	0X80
+#define DA9052_BUCKMEM_BMEMEN		0X40
+#define DA9052_BUCKMEM_VBMEM		0X3F
+
+/* BUCKPERI REGISTER BITS */
+#define DA9052_BUCKPERI_BPERICONF	0X80
+#define DA9052_BUCKPERI_BPERIEN	0X40
+#define DA9052_BUCKPERI_BPERIHS	0X20
+#define DA9052_BUCKPERI_VBPERI		0X1F
+
+/* LDO1 REGISTER BITS */
+#define DA9052_LDO1_LDO1CONF		0X80
+#define DA9052_LDO1_LDO1EN		0X40
+#define DA9052_LDO1_VLDO1		0X1F
+
+/* LDO2 REGISTER BITS */
+#define DA9052_LDO2_LDO2CONF		0X80
+#define DA9052_LDO2_LDO2EN		0X40
+#define DA9052_LDO2_VLDO2		0X3F
+
+/* LDO3 REGISTER BITS */
+#define DA9052_LDO3_LDO3CONF		0X80
+#define DA9052_LDO3_LDO3EN		0X40
+#define DA9052_LDO3_VLDO3		0X3F
+
+/* LDO4 REGISTER BITS */
+#define DA9052_LDO4_LDO4CONF		0X80
+#define DA9052_LDO4_LDO4EN		0X40
+#define DA9052_LDO4_VLDO4		0X3F
+
+/* LDO5 REGISTER BITS */
+#define DA9052_LDO5_LDO5CONF		0X80
+#define DA9052_LDO5_LDO5EN		0X40
+#define DA9052_LDO5_VLDO5		0X3F
+
+/* LDO6 REGISTER BITS */
+#define DA9052_LDO6_LDO6CONF		0X80
+#define DA9052_LDO6_LDO6EN		0X40
+#define DA9052_LDO6_VLDO6		0X3F
+
+/* LDO7 REGISTER BITS */
+#define DA9052_LDO7_LDO7CONF		0X80
+#define DA9052_LDO7_LDO7EN		0X40
+#define DA9052_LDO7_VLDO7		0X3F
+
+/* LDO8 REGISTER BITS */
+#define DA9052_LDO8_LDO8CONF		0X80
+#define DA9052_LDO8_LDO8EN		0X40
+#define DA9052_LDO8_VLDO8		0X3F
+
+/* LDO9 REGISTER BITS */
+#define DA9052_LDO9_LDO9CONF		0X80
+#define DA9052_LDO9_LDO9EN		0X40
+#define DA9052_LDO9_VLDO9		0X3F
+
+/* LDO10 REGISTER BITS */
+#define DA9052_LDO10_LDO10CONF		0X80
+#define DA9052_LDO10_LDO10EN		0X40
+#define DA9052_LDO10_VLDO10		0X3F
+
+/* SUPPLY REGISTER BITS */
+#define DA9052_SUPPLY_VLOCK		0X80
+#define DA9052_SUPPLY_VMEMSWEN		0X40
+#define DA9052_SUPPLY_VPERISWEN	0X20
+#define DA9052_SUPPLY_VLDO3GO		0X10
+#define DA9052_SUPPLY_VLDO2GO		0X08
+#define DA9052_SUPPLY_VBMEMGO		0X04
+#define DA9052_SUPPLY_VBPROGO		0X02
+#define DA9052_SUPPLY_VBCOREGO		0X01
+
+/* PULLDOWN REGISTER BITS */
+#define DA9052_PULLDOWN_LDO5PDDIS	0X20
+#define DA9052_PULLDOWN_LDO2PDDIS	0X10
+#define DA9052_PULLDOWN_LDO1PDDIS	0X08
+#define DA9052_PULLDOWN_MEMPDDIS	0X04
+#define DA9052_PULLDOWN_PROPDDIS	0X02
+#define DA9052_PULLDOWN_COREPDDIS	0X01
+
+/* BAT CHARGER REGISTER BITS */
+/* CHARGER BUCK REGISTER BITS */
+#define DA9052_CHGBUCK_CHGTEMP		0X80
+#define DA9052_CHGBUCK_CHGUSBILIM	0X40
+#define DA9052_CHGBUCK_CHGBUCKLP	0X20
+#define DA9052_CHGBUCK_CHGBUCKEN	0X10
+#define DA9052_CHGBUCK_ISETBUCK	0X0F
+
+/* WAIT COUNTER REGISTER BITS */
+#define DA9052_WAITCONT_WAITDIR	0X80
+#define DA9052_WAITCONT_RTCCLOCK	0X40
+#define DA9052_WAITCONT_WAITMODE	0X20
+#define DA9052_WAITCONT_EN32KOUT	0X10
+#define DA9052_WAITCONT_DELAYTIME	0X0F
+
+/* ISET CONTROL REGISTER BITS */
+#define DA9052_ISET_ISETDCIN		0XF0
+#define DA9052_ISET_ISETVBUS		0X0F
+
+/* BATTERY CHARGER CONTROL REGISTER BITS */
+#define DA9052_BATCHG_ICHGPRE		0XC0
+#define DA9052_BATCHG_ICHGBAT		0X3F
+
+/* CHARGER COUNTER REGISTER BITS */
+#define DA9052_CHG_CONT_VCHG_BAT	0XF8
+#define DA9052_CHG_CONT_TCTR		0X07
+
+/* INPUT CONTROL REGISTER BITS */
+#define DA9052_INPUT_CONT_TCTR_MODE	0X80
+#define DA9052_INPUT_CONT_VBUS_SUSP	0X10
+#define DA9052_INPUT_CONT_DCIN_SUSP	0X08
+
+/* CHARGING TIME REGISTER BITS */
+#define DA9052_CHGTIME_CHGTIME		0XFF
+
+/* BACKUP BATTERY CONTROL REGISTER BITS */
+#define DA9052_BBATCONT_BCHARGERISET	0XF0
+#define DA9052_BBATCONT_BCHARGERVSET	0X0F
+
+/* LED REGISTERS BITS */
+/* LED BOOST REGISTER BITS */
+#define DA9052_BOOST_EBFAULT		0X80
+#define DA9052_BOOST_MBFAULT		0X40
+#define DA9052_BOOST_BOOSTFRQ		0X20
+#define DA9052_BOOST_BOOSTILIM		0X10
+#define DA9052_BOOST_LED3INEN		0X08
+#define DA9052_BOOST_LED2INEN		0X04
+#define DA9052_BOOST_LED1INEN		0X02
+#define DA9052_BOOST_BOOSTEN		0X01
+
+/* LED CONTROL REGISTER BITS */
+#define DA9052_LEDCONT_SELLEDMODE	0X80
+#define DA9052_LEDCONT_LED3ICONT	0X40
+#define DA9052_LEDCONT_LED3RAMP	0X20
+#define DA9052_LEDCONT_LED3EN		0X10
+#define DA9052_LEDCONT_LED2RAMP	0X08
+#define DA9052_LEDCONT_LED2EN		0X04
+#define DA9052_LEDCONT_LED1RAMP	0X02
+#define DA9052_LEDCONT_LED1EN		0X01
+
+/* LEDMIN123 REGISTER BIT */
+#define DA9052_LEDMIN123_LEDMINCURRENT	0XFF
+
+/* LED1CONF REGISTER BIT */
+#define DA9052_LED1CONF_LED1CURRENT	0XFF
+
+/* LED2CONF REGISTER BIT */
+#define DA9052_LED2CONF_LED2CURRENT	0XFF
+
+/* LED3CONF REGISTER BIT */
+#define DA9052_LED3CONF_LED3CURRENT	0XFF
+
+/* LED COUNT REGISTER BIT */
+#define DA9052_LED_CONT_DIM		0X80
+
+/* ADC MAN REGISTERS BITS */
+#define DA9052_ADC_MAN_MAN_CONV	0X10
+#define DA9052_ADC_MAN_MUXSEL_VDDOUT	0X00
+#define DA9052_ADC_MAN_MUXSEL_ICH	0X01
+#define DA9052_ADC_MAN_MUXSEL_TBAT	0X02
+#define DA9052_ADC_MAN_MUXSEL_VBAT	0X03
+#define DA9052_ADC_MAN_MUXSEL_AD4	0X04
+#define DA9052_ADC_MAN_MUXSEL_AD5	0X05
+#define DA9052_ADC_MAN_MUXSEL_AD6	0X06
+#define DA9052_ADC_MAN_MUXSEL_VBBAT	0X09
+
+/* ADC CONTROL REGSISTERS BITS */
+#define DA9052_ADCCONT_COMP1V2EN	0X80
+#define DA9052_ADCCONT_ADCMODE		0X40
+#define DA9052_ADCCONT_TBATISRCEN	0X20
+#define DA9052_ADCCONT_AD4ISRCEN	0X10
+#define DA9052_ADCCONT_AUTOAD6EN	0X08
+#define DA9052_ADCCONT_AUTOAD5EN	0X04
+#define DA9052_ADCCONT_AUTOAD4EN	0X02
+#define DA9052_ADCCONT_AUTOVDDEN	0X01
+
+/* ADC 10 BIT MANUAL CONVERSION RESULT LOW REGISTER */
+#define DA9052_ADC_RES_LSB		0X03
+
+/* ADC 10 BIT MANUAL CONVERSION RESULT HIGH REGISTER */
+#define DA9052_ADCRESH_ADCRESMSB	0XFF
+
+/* VDD RES REGSISTER BIT*/
+#define DA9052_VDDRES_VDDOUTRES	0XFF
+
+/* VDD MON REGSISTER BIT */
+#define DA9052_VDDMON_VDDOUTMON	0XFF
+
+/* ICHG_AV REGSISTER BIT */
+#define DA9052_ICHGAV_ICHGAV		0XFF
+
+/* ICHG_THD REGSISTER BIT */
+#define DA9052_ICHGTHD_ICHGTHD		0XFF
+
+/* ICHG_END REGSISTER BIT */
+#define DA9052_ICHGEND_ICHGEND		0XFF
+
+/* TBAT_RES REGSISTER BIT */
+#define DA9052_TBATRES_TBATRES		0XFF
+
+/* TBAT_HIGHP REGSISTER BIT */
+#define DA9052_TBATHIGHP_TBATHIGHP	0XFF
+
+/* TBAT_HIGHN REGSISTER BIT */
+#define DA9052_TBATHIGHN_TBATHIGHN	0XFF
+
+/* TBAT_LOW REGSISTER BIT */
+#define DA9052_TBATLOW_TBATLOW		0XFF
+
+/* T_OFFSET REGSISTER BIT */
+#define DA9052_TOFFSET_TOFFSET		0XFF
+
+/* ADCIN4_RES REGSISTER BIT */
+#define DA9052_ADCIN4RES_ADCIN4RES	0XFF
+
+/* ADCIN4_HIGH REGSISTER BIT */
+#define DA9052_AUTO4HIGH_AUTO4HIGH	0XFF
+
+/* ADCIN4_LOW REGSISTER BIT */
+#define DA9052_AUTO4LOW_AUTO4LOW	0XFF
+
+/* ADCIN5_RES REGSISTER BIT */
+#define DA9052_ADCIN5RES_ADCIN5RES	0XFF
+
+/* ADCIN5_HIGH REGSISTER BIT */
+#define DA9052_AUTO5HIGH_AUTOHIGH	0XFF
+
+/* ADCIN5_LOW REGSISTER BIT */
+#define DA9052_AUTO5LOW_AUTO5LOW	0XFF
+
+/* ADCIN6_RES REGSISTER BIT */
+#define DA9052_ADCIN6RES_ADCIN6RES	0XFF
+
+/* ADCIN6_HIGH REGSISTER BIT */
+#define DA9052_AUTO6HIGH_AUTO6HIGH	0XFF
+
+/* ADCIN6_LOW REGSISTER BIT */
+#define DA9052_AUTO6LOW_AUTO6LOW	0XFF
+
+/* TJUNC_RES REGSISTER BIT*/
+#define DA9052_TJUNCRES_TJUNCRES	0XFF
+
+/* TSI REGISTER */
+/* TSI CONTROL REGISTER A BITS */
+#define DA9052_TSICONTA_TSIDELAY	0XC0
+#define DA9052_TSICONTA_TSISKIP	0X38
+#define DA9052_TSICONTA_TSIMODE	0X04
+#define DA9052_TSICONTA_PENDETEN	0X02
+#define DA9052_TSICONTA_AUTOTSIEN	0X01
+
+/* TSI CONTROL REGISTER B BITS */
+#define DA9052_TSICONTB_ADCREF		0X80
+#define DA9052_TSICONTB_TSIMAN		0X40
+#define DA9052_TSICONTB_TSIMUX		0X30
+#define DA9052_TSICONTB_TSISEL3	0X08
+#define DA9052_TSICONTB_TSISEL2	0X04
+#define DA9052_TSICONTB_TSISEL1	0X02
+#define DA9052_TSICONTB_TSISEL0	0X01
+
+/* TSI X CO-ORDINATE MSB RESULT REGISTER BITS */
+#define DA9052_TSIXMSB_TSIXM		0XFF
+
+/* TSI Y CO-ORDINATE MSB RESULT REGISTER BITS */
+#define DA9052_TSIYMSB_TSIYM		0XFF
+
+/* TSI CO-ORDINATE LSB RESULT REGISTER BITS */
+#define DA9052_TSILSB_PENDOWN		0X40
+#define DA9052_TSILSB_TSIZL		0X30
+#define DA9052_TSILSB_TSIYL		0X0C
+#define DA9052_TSILSB_TSIXL		0X03
+
+/* TSI Z MEASUREMENT MSB RESULT REGISTER BIT */
+#define DA9052_TSIZMSB_TSIZM		0XFF
+
+/* RTC REGISTER */
+/* RTC TIMER SECONDS REGISTER BITS */
+#define DA9052_COUNTS_MONITOR		0X40
+#define DA9052_RTC_SEC			0X3F
+
+/* RTC TIMER MINUTES REGISTER BIT */
+#define DA9052_RTC_MIN			0X3F
+
+/* RTC TIMER HOUR REGISTER BIT */
+#define DA9052_RTC_HOUR		0X1F
+
+/* RTC TIMER DAYS REGISTER BIT */
+#define DA9052_RTC_DAY			0X1F
+
+/* RTC TIMER MONTHS REGISTER BIT */
+#define DA9052_RTC_MONTH		0X0F
+
+/* RTC TIMER YEARS REGISTER BIT */
+#define DA9052_RTC_YEAR		0X3F
+
+/* RTC ALARM MINUTES REGISTER BITS */
+#define DA9052_ALARMM_I_TICK_TYPE	0X80
+#define DA9052_ALARMMI_ALARMTYPE	0X40
+
+/* RTC ALARM YEARS REGISTER BITS */
+#define DA9052_ALARM_Y_TICK_ON		0X80
+#define DA9052_ALARM_Y_ALARM_ON	0X40
+
+/* RTC SECONDS REGISTER A BITS */
+#define DA9052_SECONDA_SECONDSA	0XFF
+
+/* RTC SECONDS REGISTER B BITS */
+#define DA9052_SECONDB_SECONDSB	0XFF
+
+/* RTC SECONDS REGISTER C BITS */
+#define DA9052_SECONDC_SECONDSC	0XFF
+
+/* RTC SECONDS REGISTER D BITS */
+#define DA9052_SECONDD_SECONDSD	0XFF
+
+#endif
+/* __LINUX_MFD_DA9052_REG_H */
diff --git a/include/linux/mfd/davinci_voicecodec.h b/include/linux/mfd/davinci_voicecodec.h
new file mode 100644
index 00000000..0ab61320
--- /dev/null
+++ b/include/linux/mfd/davinci_voicecodec.h
@@ -0,0 +1,126 @@
+/*
+ * DaVinci Voice Codec Core Interface for TI platforms
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc
+ *
+ * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __LINUX_MFD_DAVINCI_VOICECODEC_H_
+#define __LINUX_MFD_DAVINIC_VOICECODEC_H_
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+
+#include <mach/edma.h>
+
+/*
+ * Register values.
+ */
+#define DAVINCI_VC_PID			0x00
+#define DAVINCI_VC_CTRL			0x04
+#define DAVINCI_VC_INTEN		0x08
+#define DAVINCI_VC_INTSTATUS		0x0c
+#define DAVINCI_VC_INTCLR		0x10
+#define DAVINCI_VC_EMUL_CTRL		0x14
+#define DAVINCI_VC_RFIFO		0x20
+#define DAVINCI_VC_WFIFO		0x24
+#define DAVINCI_VC_FIFOSTAT		0x28
+#define DAVINCI_VC_TST_CTRL		0x2C
+#define DAVINCI_VC_REG05		0x94
+#define DAVINCI_VC_REG09		0xA4
+#define DAVINCI_VC_REG12		0xB0
+
+/* DAVINCI_VC_CTRL bit fields */
+#define DAVINCI_VC_CTRL_MASK		0x5500
+#define DAVINCI_VC_CTRL_RSTADC		BIT(0)
+#define DAVINCI_VC_CTRL_RSTDAC		BIT(1)
+#define DAVINCI_VC_CTRL_RD_BITS_8	BIT(4)
+#define DAVINCI_VC_CTRL_RD_UNSIGNED	BIT(5)
+#define DAVINCI_VC_CTRL_WD_BITS_8	BIT(6)
+#define DAVINCI_VC_CTRL_WD_UNSIGNED	BIT(7)
+#define DAVINCI_VC_CTRL_RFIFOEN		BIT(8)
+#define DAVINCI_VC_CTRL_RFIFOCL		BIT(9)
+#define DAVINCI_VC_CTRL_RFIFOMD_WORD_1	BIT(10)
+#define DAVINCI_VC_CTRL_WFIFOEN		BIT(12)
+#define DAVINCI_VC_CTRL_WFIFOCL		BIT(13)
+#define DAVINCI_VC_CTRL_WFIFOMD_WORD_1	BIT(14)
+
+/* DAVINCI_VC_INT bit fields */
+#define DAVINCI_VC_INT_MASK		0x3F
+#define DAVINCI_VC_INT_RDRDY_MASK	BIT(0)
+#define DAVINCI_VC_INT_RERROVF_MASK	BIT(1)
+#define DAVINCI_VC_INT_RERRUDR_MASK	BIT(2)
+#define DAVINCI_VC_INT_WDREQ_MASK	BIT(3)
+#define DAVINCI_VC_INT_WERROVF_MASKBIT	BIT(4)
+#define DAVINCI_VC_INT_WERRUDR_MASK	BIT(5)
+
+/* DAVINCI_VC_REG05 bit fields */
+#define DAVINCI_VC_REG05_PGA_GAIN	0x07
+
+/* DAVINCI_VC_REG09 bit fields */
+#define DAVINCI_VC_REG09_MUTE		0x40
+#define DAVINCI_VC_REG09_DIG_ATTEN	0x3F
+
+/* DAVINCI_VC_REG12 bit fields */
+#define DAVINCI_VC_REG12_POWER_ALL_ON	0xFD
+#define DAVINCI_VC_REG12_POWER_ALL_OFF	0x00
+
+#define DAVINCI_VC_CELLS		2
+
+enum davinci_vc_cells {
+	DAVINCI_VC_VCIF_CELL,
+	DAVINCI_VC_CQ93VC_CELL,
+};
+
+struct davinci_vcif {
+	struct platform_device	*pdev;
+	u32 dma_tx_channel;
+	u32 dma_rx_channel;
+	dma_addr_t dma_tx_addr;
+	dma_addr_t dma_rx_addr;
+};
+
+struct cq93vc {
+	struct platform_device *pdev;
+	struct snd_soc_codec *codec;
+	u32 sysclk;
+};
+
+struct davinci_vc;
+
+struct davinci_vc {
+	/* Device data */
+	struct device *dev;
+	struct platform_device *pdev;
+	struct clk *clk;
+
+	/* Memory resources */
+	void __iomem *base;
+	resource_size_t pbase;
+	size_t base_size;
+
+	/* MFD cells */
+	struct mfd_cell cells[DAVINCI_VC_CELLS];
+
+	/* Client devices */
+	struct davinci_vcif davinci_vcif;
+	struct cq93vc cq93vc;
+};
+
+#endif
diff --git a/include/linux/mfd/db5500-prcmu.h b/include/linux/mfd/db5500-prcmu.h
new file mode 100644
index 00000000..5a049dfa
--- /dev/null
+++ b/include/linux/mfd/db5500-prcmu.h
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * U5500 PRCMU API.
+ */
+#ifndef __MFD_DB5500_PRCMU_H
+#define __MFD_DB5500_PRCMU_H
+
+static inline int prcmu_resetout(u8 resoutn, u8 state)
+{
+	return 0;
+}
+
+static inline int db5500_prcmu_set_epod(u16 epod_id, u8 epod_state)
+{
+	return 0;
+}
+
+static inline int db5500_prcmu_request_clock(u8 clock, bool enable)
+{
+	return 0;
+}
+
+static inline int db5500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
+	bool keep_ap_pll)
+{
+	return 0;
+}
+
+static inline int db5500_prcmu_config_esram0_deep_sleep(u8 state)
+{
+	return 0;
+}
+
+static inline u16 db5500_prcmu_get_reset_code(void)
+{
+	return 0;
+}
+
+static inline bool db5500_prcmu_is_ac_wake_requested(void)
+{
+	return 0;
+}
+
+static inline int db5500_prcmu_set_arm_opp(u8 opp)
+{
+	return 0;
+}
+
+static inline int db5500_prcmu_get_arm_opp(void)
+{
+	return 0;
+}
+
+static inline void db5500_prcmu_config_abb_event_readout(u32 abb_events) {}
+
+static inline void db5500_prcmu_get_abb_event_buffer(void __iomem **buf) {}
+
+static inline void db5500_prcmu_system_reset(u16 reset_code) {}
+
+static inline void db5500_prcmu_enable_wakeups(u32 wakeups) {}
+
+#ifdef CONFIG_MFD_DB5500_PRCMU
+
+void db5500_prcmu_early_init(void);
+int db5500_prcmu_set_display_clocks(void);
+int db5500_prcmu_disable_dsipll(void);
+int db5500_prcmu_enable_dsipll(void);
+int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
+int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
+
+#else /* !CONFIG_UX500_SOC_DB5500 */
+
+static inline void db5500_prcmu_early_init(void) {}
+
+static inline int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
+{
+	return -ENOSYS;
+}
+
+static inline int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
+{
+	return -ENOSYS;
+}
+
+static inline int db5500_prcmu_set_display_clocks(void)
+{
+	return 0;
+}
+
+static inline int db5500_prcmu_disable_dsipll(void)
+{
+	return 0;
+}
+
+static inline int db5500_prcmu_enable_dsipll(void)
+{
+	return 0;
+}
+
+#endif /* CONFIG_MFD_DB5500_PRCMU */
+
+#endif /* __MFD_DB5500_PRCMU_H */
diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h
new file mode 100644
index 00000000..b3a43b12
--- /dev/null
+++ b/include/linux/mfd/db8500-prcmu.h
@@ -0,0 +1,795 @@
+/*
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
+ *
+ * PRCMU f/w APIs
+ */
+#ifndef __MFD_DB8500_PRCMU_H
+#define __MFD_DB8500_PRCMU_H
+
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+
+/*
+ * Registers
+ */
+#define DB8500_PRCM_GPIOCR 0x138
+#define DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0	BIT(0)
+#define DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD	BIT(9)
+#define DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1	BIT(11)
+#define DB8500_PRCM_GPIOCR_SPI2_SELECT		BIT(23)
+
+#define DB8500_PRCM_LINE_VALUE 0x170
+#define DB8500_PRCM_LINE_VALUE_HSI_CAWAKE0	BIT(3)
+
+#define DB8500_PRCM_DSI_SW_RESET 0x324
+#define DB8500_PRCM_DSI_SW_RESET_DSI0_SW_RESETN BIT(0)
+#define DB8500_PRCM_DSI_SW_RESET_DSI1_SW_RESETN BIT(1)
+#define DB8500_PRCM_DSI_SW_RESET_DSI2_SW_RESETN BIT(2)
+
+/* This portion previously known as <mach/prcmu-fw-defs_v1.h> */
+
+/**
+ * enum state - ON/OFF state definition
+ * @OFF: State is ON
+ * @ON: State is OFF
+ *
+ */
+enum state {
+	OFF = 0x0,
+	ON  = 0x1,
+};
+
+/**
+ * enum ret_state - general purpose On/Off/Retention states
+ *
+ */
+enum ret_state {
+	OFFST = 0,
+	ONST  = 1,
+	RETST = 2
+};
+
+/**
+ * enum clk_arm - ARM Cortex A9 clock schemes
+ * @A9_OFF:
+ * @A9_BOOT:
+ * @A9_OPPT1:
+ * @A9_OPPT2:
+ * @A9_EXTCLK:
+ */
+enum clk_arm {
+	A9_OFF,
+	A9_BOOT,
+	A9_OPPT1,
+	A9_OPPT2,
+	A9_EXTCLK
+};
+
+/**
+ * enum clk_gen - GEN#0/GEN#1 clock schemes
+ * @GEN_OFF:
+ * @GEN_BOOT:
+ * @GEN_OPPT1:
+ */
+enum clk_gen {
+	GEN_OFF,
+	GEN_BOOT,
+	GEN_OPPT1,
+};
+
+/* some information between arm and xp70 */
+
+/**
+ * enum romcode_write - Romcode message written by A9 AND read by XP70
+ * @RDY_2_DS: Value set when ApDeepSleep state can be executed by XP70
+ * @RDY_2_XP70_RST: Value set when 0x0F has been successfully polled by the
+ *                 romcode. The xp70 will go into self-reset
+ */
+enum romcode_write {
+	RDY_2_DS = 0x09,
+	RDY_2_XP70_RST = 0x10
+};
+
+/**
+ * enum romcode_read - Romcode message written by XP70 and read by A9
+ * @INIT: Init value when romcode field is not used
+ * @FS_2_DS: Value set when power state is going from ApExecute to
+ *          ApDeepSleep
+ * @END_DS: Value set when ApDeepSleep power state is reached coming from
+ *         ApExecute state
+ * @DS_TO_FS: Value set when power state is going from ApDeepSleep to
+ *           ApExecute
+ * @END_FS: Value set when ApExecute power state is reached coming from
+ *         ApDeepSleep state
+ * @SWR: Value set when power state is going to ApReset
+ * @END_SWR: Value set when the xp70 finished executing ApReset actions and
+ *          waits for romcode acknowledgment to go to self-reset
+ */
+enum romcode_read {
+	INIT = 0x00,
+	FS_2_DS = 0x0A,
+	END_DS = 0x0B,
+	DS_TO_FS = 0x0C,
+	END_FS = 0x0D,
+	SWR = 0x0E,
+	END_SWR = 0x0F
+};
+
+/**
+ * enum ap_pwrst - current power states defined in PRCMU firmware
+ * @NO_PWRST: Current power state init
+ * @AP_BOOT: Current power state is apBoot
+ * @AP_EXECUTE: Current power state is apExecute
+ * @AP_DEEP_SLEEP: Current power state is apDeepSleep
+ * @AP_SLEEP: Current power state is apSleep
+ * @AP_IDLE: Current power state is apIdle
+ * @AP_RESET: Current power state is apReset
+ */
+enum ap_pwrst {
+	NO_PWRST = 0x00,
+	AP_BOOT = 0x01,
+	AP_EXECUTE = 0x02,
+	AP_DEEP_SLEEP = 0x03,
+	AP_SLEEP = 0x04,
+	AP_IDLE = 0x05,
+	AP_RESET = 0x06
+};
+
+/**
+ * enum ap_pwrst_trans - Transition states defined in PRCMU firmware
+ * @NO_TRANSITION: No power state transition
+ * @APEXECUTE_TO_APSLEEP: Power state transition from ApExecute to ApSleep
+ * @APIDLE_TO_APSLEEP: Power state transition from ApIdle to ApSleep
+ * @APBOOT_TO_APEXECUTE: Power state transition from ApBoot to ApExecute
+ * @APEXECUTE_TO_APDEEPSLEEP: Power state transition from ApExecute to
+ *                          ApDeepSleep
+ * @APEXECUTE_TO_APIDLE: Power state transition from ApExecute to ApIdle
+ */
+enum ap_pwrst_trans {
+	PRCMU_AP_NO_CHANGE		= 0x00,
+	APEXECUTE_TO_APSLEEP		= 0x01,
+	APIDLE_TO_APSLEEP		= 0x02, /* To be removed */
+	PRCMU_AP_SLEEP			= 0x01,
+	APBOOT_TO_APEXECUTE		= 0x03,
+	APEXECUTE_TO_APDEEPSLEEP	= 0x04, /* To be removed */
+	PRCMU_AP_DEEP_SLEEP		= 0x04,
+	APEXECUTE_TO_APIDLE		= 0x05, /* To be removed */
+	PRCMU_AP_IDLE			= 0x05,
+	PRCMU_AP_DEEP_IDLE		= 0x07,
+};
+
+/**
+ * enum hw_acc_state - State definition for hardware accelerator
+ * @HW_NO_CHANGE: The hardware accelerator state must remain unchanged
+ * @HW_OFF: The hardware accelerator must be switched off
+ * @HW_OFF_RAMRET: The hardware accelerator must be switched off with its
+ *               internal RAM in retention
+ * @HW_ON: The hwa hardware accelerator hwa must be switched on
+ *
+ * NOTE! Deprecated, to be removed when all users switched over to use the
+ * regulator API.
+ */
+enum hw_acc_state {
+	HW_NO_CHANGE = 0x00,
+	HW_OFF = 0x01,
+	HW_OFF_RAMRET = 0x02,
+	HW_ON = 0x04
+};
+
+/**
+ * enum  mbox_2_arm_stat - Status messages definition for mbox_arm
+ * @BOOT_TO_EXECUTEOK: The apBoot to apExecute state transition has been
+ *                    completed
+ * @DEEPSLEEPOK: The apExecute to apDeepSleep state transition has been
+ *              completed
+ * @SLEEPOK: The apExecute to apSleep state transition has been completed
+ * @IDLEOK: The apExecute to apIdle state transition has been completed
+ * @SOFTRESETOK: The A9 watchdog/ SoftReset state has been completed
+ * @SOFTRESETGO : The A9 watchdog/SoftReset state is on going
+ * @BOOT_TO_EXECUTE: The apBoot to apExecute state transition is on going
+ * @EXECUTE_TO_DEEPSLEEP: The apExecute to apDeepSleep state transition is on
+ *                       going
+ * @DEEPSLEEP_TO_EXECUTE: The apDeepSleep to apExecute state transition is on
+ *                       going
+ * @DEEPSLEEP_TO_EXECUTEOK: The apDeepSleep to apExecute state transition has
+ *                         been completed
+ * @EXECUTE_TO_SLEEP: The apExecute to apSleep state transition is on going
+ * @SLEEP_TO_EXECUTE: The apSleep to apExecute state transition is on going
+ * @SLEEP_TO_EXECUTEOK: The apSleep to apExecute state transition has been
+ *                     completed
+ * @EXECUTE_TO_IDLE: The apExecute to apIdle state transition is on going
+ * @IDLE_TO_EXECUTE: The apIdle to apExecute state transition is on going
+ * @IDLE_TO_EXECUTEOK: The apIdle to apExecute state transition has been
+ *                    completed
+ * @INIT_STATUS: Status init
+ */
+enum ap_pwrsttr_status {
+	BOOT_TO_EXECUTEOK = 0xFF,
+	DEEPSLEEPOK = 0xFE,
+	SLEEPOK = 0xFD,
+	IDLEOK = 0xFC,
+	SOFTRESETOK = 0xFB,
+	SOFTRESETGO = 0xFA,
+	BOOT_TO_EXECUTE = 0xF9,
+	EXECUTE_TO_DEEPSLEEP = 0xF8,
+	DEEPSLEEP_TO_EXECUTE = 0xF7,
+	DEEPSLEEP_TO_EXECUTEOK = 0xF6,
+	EXECUTE_TO_SLEEP = 0xF5,
+	SLEEP_TO_EXECUTE = 0xF4,
+	SLEEP_TO_EXECUTEOK = 0xF3,
+	EXECUTE_TO_IDLE = 0xF2,
+	IDLE_TO_EXECUTE = 0xF1,
+	IDLE_TO_EXECUTEOK = 0xF0,
+	RDYTODS_RETURNTOEXE    = 0xEF,
+	NORDYTODS_RETURNTOEXE  = 0xEE,
+	EXETOSLEEP_RETURNTOEXE = 0xED,
+	EXETOIDLE_RETURNTOEXE  = 0xEC,
+	INIT_STATUS = 0xEB,
+
+	/*error messages */
+	INITERROR                     = 0x00,
+	PLLARMLOCKP_ER                = 0x01,
+	PLLDDRLOCKP_ER                = 0x02,
+	PLLSOCLOCKP_ER                = 0x03,
+	PLLSOCK1LOCKP_ER              = 0x04,
+	ARMWFI_ER                     = 0x05,
+	SYSCLKOK_ER                   = 0x06,
+	I2C_NACK_DATA_ER              = 0x07,
+	BOOT_ER                       = 0x08,
+	I2C_STATUS_ALWAYS_1           = 0x0A,
+	I2C_NACK_REG_ADDR_ER          = 0x0B,
+	I2C_NACK_DATA0123_ER          = 0x1B,
+	I2C_NACK_ADDR_ER              = 0x1F,
+	CURAPPWRSTISNOT_BOOT          = 0x20,
+	CURAPPWRSTISNOT_EXECUTE       = 0x21,
+	CURAPPWRSTISNOT_SLEEPMODE     = 0x22,
+	CURAPPWRSTISNOT_CORRECTFORIT10 = 0x23,
+	FIFO4500WUISNOT_WUPEVENT      = 0x24,
+	PLL32KLOCKP_ER                = 0x29,
+	DDRDEEPSLEEPOK_ER             = 0x2A,
+	ROMCODEREADY_ER               = 0x50,
+	WUPBEFOREDS                   = 0x51,
+	DDRCONFIG_ER                  = 0x52,
+	WUPBEFORESLEEP                = 0x53,
+	WUPBEFOREIDLE                 = 0x54
+};  /* earlier called as  mbox_2_arm_stat */
+
+/**
+ * enum dvfs_stat - DVFS status messages definition
+ * @DVFS_GO: A state transition DVFS is on going
+ * @DVFS_ARM100OPPOK: The state transition DVFS has been completed for 100OPP
+ * @DVFS_ARM50OPPOK: The state transition DVFS has been completed for 50OPP
+ * @DVFS_ARMEXTCLKOK: The state transition DVFS has been completed for EXTCLK
+ * @DVFS_NOCHGTCLKOK: The state transition DVFS has been completed for
+ *                   NOCHGCLK
+ * @DVFS_INITSTATUS: Value init
+ */
+enum dvfs_stat {
+	DVFS_GO = 0xFF,
+	DVFS_ARM100OPPOK = 0xFE,
+	DVFS_ARM50OPPOK = 0xFD,
+	DVFS_ARMEXTCLKOK = 0xFC,
+	DVFS_NOCHGTCLKOK = 0xFB,
+	DVFS_INITSTATUS = 0x00
+};
+
+/**
+ * enum sva_mmdsp_stat - SVA MMDSP status messages
+ * @SVA_MMDSP_GO: SVAMMDSP interrupt has happened
+ * @SVA_MMDSP_INIT: Status init
+ */
+enum sva_mmdsp_stat {
+	SVA_MMDSP_GO = 0xFF,
+	SVA_MMDSP_INIT = 0x00
+};
+
+/**
+ * enum sia_mmdsp_stat - SIA MMDSP status messages
+ * @SIA_MMDSP_GO: SIAMMDSP interrupt has happened
+ * @SIA_MMDSP_INIT: Status init
+ */
+enum sia_mmdsp_stat {
+	SIA_MMDSP_GO = 0xFF,
+	SIA_MMDSP_INIT = 0x00
+};
+
+/**
+ * enum  mbox_to_arm_err - Error messages definition
+ * @INIT_ERR: Init value
+ * @PLLARMLOCKP_ERR: PLLARM has not been correctly locked in given time
+ * @PLLDDRLOCKP_ERR: PLLDDR has not been correctly locked in the given time
+ * @PLLSOC0LOCKP_ERR: PLLSOC0 has not been correctly locked in the given time
+ * @PLLSOC1LOCKP_ERR: PLLSOC1 has not been correctly locked in the given time
+ * @ARMWFI_ERR: The ARM WFI has not been correctly executed in the given time
+ * @SYSCLKOK_ERR: The SYSCLK is not available in the given time
+ * @BOOT_ERR: Romcode has not validated the XP70 self reset in the given time
+ * @ROMCODESAVECONTEXT: The Romcode didn.t correctly save it secure context
+ * @VARMHIGHSPEEDVALTO_ERR: The ARM high speed supply value transfered
+ *          through I2C has not been correctly executed in the given time
+ * @VARMHIGHSPEEDACCESS_ERR: The command value of VarmHighSpeedVal transfered
+ *             through I2C has not been correctly executed in the given time
+ * @VARMLOWSPEEDVALTO_ERR:The ARM low speed supply value transfered through
+ *                     I2C has not been correctly executed in the given time
+ * @VARMLOWSPEEDACCESS_ERR: The command value of VarmLowSpeedVal transfered
+ *             through I2C has not been correctly executed in the given time
+ * @VARMRETENTIONVALTO_ERR: The ARM retention supply value transfered through
+ *                     I2C has not been correctly executed in the given time
+ * @VARMRETENTIONACCESS_ERR: The command value of VarmRetentionVal transfered
+ *             through I2C has not been correctly executed in the given time
+ * @VAPEHIGHSPEEDVALTO_ERR: The APE highspeed supply value transfered through
+ *                     I2C has not been correctly executed in the given time
+ * @VSAFEHPVALTO_ERR: The SAFE high power supply value transfered through I2C
+ *                         has not been correctly executed in the given time
+ * @VMODSEL1VALTO_ERR: The MODEM sel1 supply value transfered through I2C has
+ *                             not been correctly executed in the given time
+ * @VMODSEL2VALTO_ERR: The MODEM sel2 supply value transfered through I2C has
+ *                             not been correctly executed in the given time
+ * @VARMOFFACCESS_ERR: The command value of Varm ON/OFF transfered through
+ *                     I2C has not been correctly executed in the given time
+ * @VAPEOFFACCESS_ERR: The command value of Vape ON/OFF transfered through
+ *                     I2C has not been correctly executed in the given time
+ * @VARMRETACCES_ERR: The command value of Varm retention ON/OFF transfered
+ *             through I2C has not been correctly executed in the given time
+ * @CURAPPWRSTISNOTBOOT:Generated when Arm want to do power state transition
+ *             ApBoot to ApExecute but the power current state is not Apboot
+ * @CURAPPWRSTISNOTEXECUTE: Generated when Arm want to do power state
+ *              transition from ApExecute to others power state but the
+ *              power current state is not ApExecute
+ * @CURAPPWRSTISNOTSLEEPMODE: Generated when wake up events are transmitted
+ *             but the power current state is not ApDeepSleep/ApSleep/ApIdle
+ * @CURAPPWRSTISNOTCORRECTDBG:  Generated when wake up events are transmitted
+ *              but the power current state is not correct
+ * @ARMREGU1VALTO_ERR:The ArmRegu1 value transferred through I2C has not
+ *                    been correctly executed in the given time
+ * @ARMREGU2VALTO_ERR: The ArmRegu2 value transferred through I2C has not
+ *                    been correctly executed in the given time
+ * @VAPEREGUVALTO_ERR: The VApeRegu value transfered through I2C has not
+ *                    been correctly executed in the given time
+ * @VSMPS3REGUVALTO_ERR: The VSmps3Regu value transfered through I2C has not
+ *                      been correctly executed in the given time
+ * @VMODREGUVALTO_ERR: The VModemRegu value transfered through I2C has not
+ *                    been correctly executed in the given time
+ */
+enum mbox_to_arm_err {
+	INIT_ERR = 0x00,
+	PLLARMLOCKP_ERR = 0x01,
+	PLLDDRLOCKP_ERR = 0x02,
+	PLLSOC0LOCKP_ERR = 0x03,
+	PLLSOC1LOCKP_ERR = 0x04,
+	ARMWFI_ERR = 0x05,
+	SYSCLKOK_ERR = 0x06,
+	BOOT_ERR = 0x07,
+	ROMCODESAVECONTEXT = 0x08,
+	VARMHIGHSPEEDVALTO_ERR = 0x10,
+	VARMHIGHSPEEDACCESS_ERR = 0x11,
+	VARMLOWSPEEDVALTO_ERR = 0x12,
+	VARMLOWSPEEDACCESS_ERR = 0x13,
+	VARMRETENTIONVALTO_ERR = 0x14,
+	VARMRETENTIONACCESS_ERR = 0x15,
+	VAPEHIGHSPEEDVALTO_ERR = 0x16,
+	VSAFEHPVALTO_ERR = 0x17,
+	VMODSEL1VALTO_ERR = 0x18,
+	VMODSEL2VALTO_ERR = 0x19,
+	VARMOFFACCESS_ERR = 0x1A,
+	VAPEOFFACCESS_ERR = 0x1B,
+	VARMRETACCES_ERR = 0x1C,
+	CURAPPWRSTISNOTBOOT = 0x20,
+	CURAPPWRSTISNOTEXECUTE = 0x21,
+	CURAPPWRSTISNOTSLEEPMODE = 0x22,
+	CURAPPWRSTISNOTCORRECTDBG = 0x23,
+	ARMREGU1VALTO_ERR = 0x24,
+	ARMREGU2VALTO_ERR = 0x25,
+	VAPEREGUVALTO_ERR = 0x26,
+	VSMPS3REGUVALTO_ERR = 0x27,
+	VMODREGUVALTO_ERR = 0x28
+};
+
+enum hw_acc {
+	SVAMMDSP = 0,
+	SVAPIPE = 1,
+	SIAMMDSP = 2,
+	SIAPIPE = 3,
+	SGA = 4,
+	B2R2MCDE = 5,
+	ESRAM12 = 6,
+	ESRAM34 = 7,
+};
+
+enum cs_pwrmgt {
+	PWRDNCS0  = 0,
+	WKUPCS0   = 1,
+	PWRDNCS1  = 2,
+	WKUPCS1   = 3
+};
+
+/* Defs related to autonomous power management */
+
+/**
+ * enum sia_sva_pwr_policy - Power policy
+ * @NO_CHGT:	No change
+ * @DSPOFF_HWPOFF:
+ * @DSPOFFRAMRET_HWPOFF:
+ * @DSPCLKOFF_HWPOFF:
+ * @DSPCLKOFF_HWPCLKOFF:
+ *
+ */
+enum sia_sva_pwr_policy {
+	NO_CHGT			= 0x0,
+	DSPOFF_HWPOFF		= 0x1,
+	DSPOFFRAMRET_HWPOFF	= 0x2,
+	DSPCLKOFF_HWPOFF	= 0x3,
+	DSPCLKOFF_HWPCLKOFF	= 0x4,
+};
+
+/**
+ * enum auto_enable - Auto Power enable
+ * @AUTO_OFF:
+ * @AUTO_ON:
+ *
+ */
+enum auto_enable {
+	AUTO_OFF	= 0x0,
+	AUTO_ON		= 0x1,
+};
+
+/* End of file previously known as prcmu-fw-defs_v1.h */
+
+/**
+ * enum prcmu_power_status - results from set_power_state
+ * @PRCMU_SLEEP_OK: Sleep went ok
+ * @PRCMU_DEEP_SLEEP_OK: DeepSleep went ok
+ * @PRCMU_IDLE_OK: Idle went ok
+ * @PRCMU_DEEPIDLE_OK: DeepIdle went ok
+ * @PRCMU_PRCMU2ARMPENDINGIT_ER: Pending interrupt detected
+ * @PRCMU_ARMPENDINGIT_ER: Pending interrupt detected
+ *
+ */
+enum prcmu_power_status {
+	PRCMU_SLEEP_OK			= 0xf3,
+	PRCMU_DEEP_SLEEP_OK		= 0xf6,
+	PRCMU_IDLE_OK			= 0xf0,
+	PRCMU_DEEPIDLE_OK		= 0xe3,
+	PRCMU_PRCMU2ARMPENDINGIT_ER	= 0x91,
+	PRCMU_ARMPENDINGIT_ER		= 0x93,
+};
+
+/*
+ * Definitions for autonomous power management configuration.
+ */
+
+#define PRCMU_AUTO_PM_OFF 0
+#define PRCMU_AUTO_PM_ON 1
+
+#define PRCMU_AUTO_PM_POWER_ON_HSEM BIT(0)
+#define PRCMU_AUTO_PM_POWER_ON_ABB_FIFO_IT BIT(1)
+
+enum prcmu_auto_pm_policy {
+	PRCMU_AUTO_PM_POLICY_NO_CHANGE,
+	PRCMU_AUTO_PM_POLICY_DSP_OFF_HWP_OFF,
+	PRCMU_AUTO_PM_POLICY_DSP_OFF_RAMRET_HWP_OFF,
+	PRCMU_AUTO_PM_POLICY_DSP_CLK_OFF_HWP_OFF,
+	PRCMU_AUTO_PM_POLICY_DSP_CLK_OFF_HWP_CLK_OFF,
+};
+
+/**
+ * struct prcmu_auto_pm_config - Autonomous power management configuration.
+ * @sia_auto_pm_enable: SIA autonomous pm enable. (PRCMU_AUTO_PM_{OFF,ON})
+ * @sia_power_on:       SIA power ON enable. (PRCMU_AUTO_PM_POWER_ON_* bitmask)
+ * @sia_policy:         SIA power policy. (enum prcmu_auto_pm_policy)
+ * @sva_auto_pm_enable: SVA autonomous pm enable. (PRCMU_AUTO_PM_{OFF,ON})
+ * @sva_power_on:       SVA power ON enable. (PRCMU_AUTO_PM_POWER_ON_* bitmask)
+ * @sva_policy:         SVA power policy. (enum prcmu_auto_pm_policy)
+ */
+struct prcmu_auto_pm_config {
+	u8 sia_auto_pm_enable;
+	u8 sia_power_on;
+	u8 sia_policy;
+	u8 sva_auto_pm_enable;
+	u8 sva_power_on;
+	u8 sva_policy;
+};
+
+#define PRCMU_FW_PROJECT_U8500		2
+#define PRCMU_FW_PROJECT_U9500		4
+#define PRCMU_FW_PROJECT_U8500_C2	7
+#define PRCMU_FW_PROJECT_U9500_C2	11
+#define PRCMU_FW_PROJECT_U8520		13
+#define PRCMU_FW_PROJECT_U8420		14
+
+struct prcmu_fw_version {
+	u8 project;
+	u8 api_version;
+	u8 func_version;
+	u8 errata;
+};
+
+#ifdef CONFIG_MFD_DB8500_PRCMU
+
+void db8500_prcmu_early_init(void);
+int prcmu_set_rc_a2p(enum romcode_write);
+enum romcode_read prcmu_get_rc_p2a(void);
+enum ap_pwrst prcmu_get_xp70_current_state(void);
+bool prcmu_has_arm_maxopp(void);
+struct prcmu_fw_version *prcmu_get_fw_version(void);
+int prcmu_request_ape_opp_100_voltage(bool enable);
+int prcmu_release_usb_wakeup_state(void);
+void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
+	struct prcmu_auto_pm_config *idle);
+bool prcmu_is_auto_pm_enabled(void);
+
+int prcmu_config_clkout(u8 clkout, u8 source, u8 div);
+int prcmu_set_clock_divider(u8 clock, u8 divider);
+int db8500_prcmu_config_hotdog(u8 threshold);
+int db8500_prcmu_config_hotmon(u8 low, u8 high);
+int db8500_prcmu_start_temp_sense(u16 cycles32k);
+int db8500_prcmu_stop_temp_sense(void);
+int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
+int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
+
+void prcmu_ac_wake_req(void);
+void prcmu_ac_sleep_req(void);
+void db8500_prcmu_modem_reset(void);
+
+int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off);
+int db8500_prcmu_enable_a9wdog(u8 id);
+int db8500_prcmu_disable_a9wdog(u8 id);
+int db8500_prcmu_kick_a9wdog(u8 id);
+int db8500_prcmu_load_a9wdog(u8 id, u32 val);
+
+void db8500_prcmu_system_reset(u16 reset_code);
+int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll);
+u8 db8500_prcmu_get_power_state_result(void);
+int db8500_prcmu_gic_decouple(void);
+int db8500_prcmu_gic_recouple(void);
+int db8500_prcmu_copy_gic_settings(void);
+bool db8500_prcmu_gic_pending_irq(void);
+bool db8500_prcmu_pending_irq(void);
+bool db8500_prcmu_is_cpu_in_wfi(int cpu);
+void db8500_prcmu_enable_wakeups(u32 wakeups);
+int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state);
+int db8500_prcmu_request_clock(u8 clock, bool enable);
+int db8500_prcmu_set_display_clocks(void);
+int db8500_prcmu_disable_dsipll(void);
+int db8500_prcmu_enable_dsipll(void);
+void db8500_prcmu_config_abb_event_readout(u32 abb_events);
+void db8500_prcmu_get_abb_event_buffer(void __iomem **buf);
+int db8500_prcmu_config_esram0_deep_sleep(u8 state);
+u16 db8500_prcmu_get_reset_code(void);
+bool db8500_prcmu_is_ac_wake_requested(void);
+int db8500_prcmu_set_arm_opp(u8 opp);
+int db8500_prcmu_get_arm_opp(void);
+int db8500_prcmu_set_ape_opp(u8 opp);
+int db8500_prcmu_get_ape_opp(void);
+int db8500_prcmu_set_ddr_opp(u8 opp);
+int db8500_prcmu_get_ddr_opp(void);
+
+u32 db8500_prcmu_read(unsigned int reg);
+void db8500_prcmu_write(unsigned int reg, u32 value);
+void db8500_prcmu_write_masked(unsigned int reg, u32 mask, u32 value);
+
+#else /* !CONFIG_MFD_DB8500_PRCMU */
+
+static inline void db8500_prcmu_early_init(void) {}
+
+static inline int prcmu_set_rc_a2p(enum romcode_write code)
+{
+	return 0;
+}
+
+static inline enum romcode_read prcmu_get_rc_p2a(void)
+{
+	return INIT;
+}
+
+static inline enum ap_pwrst prcmu_get_xp70_current_state(void)
+{
+	return AP_EXECUTE;
+}
+
+static inline bool prcmu_has_arm_maxopp(void)
+{
+	return false;
+}
+
+static inline struct prcmu_fw_version *prcmu_get_fw_version(void)
+{
+	return NULL;
+}
+
+static inline int db8500_prcmu_set_ape_opp(u8 opp)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_get_ape_opp(void)
+{
+	return APE_100_OPP;
+}
+
+static inline int prcmu_request_ape_opp_100_voltage(bool enable)
+{
+	return 0;
+}
+
+static inline int prcmu_release_usb_wakeup_state(void)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_set_ddr_opp(u8 opp)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_get_ddr_opp(void)
+{
+	return DDR_100_OPP;
+}
+
+static inline void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
+	struct prcmu_auto_pm_config *idle)
+{
+}
+
+static inline bool prcmu_is_auto_pm_enabled(void)
+{
+	return false;
+}
+
+static inline int prcmu_config_clkout(u8 clkout, u8 source, u8 div)
+{
+	return 0;
+}
+
+static inline int prcmu_set_clock_divider(u8 clock, u8 divider)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_config_hotdog(u8 threshold)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_config_hotmon(u8 low, u8 high)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_start_temp_sense(u16 cycles32k)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_stop_temp_sense(void)
+{
+	return 0;
+}
+
+static inline int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
+{
+	return -ENOSYS;
+}
+
+static inline int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
+{
+	return -ENOSYS;
+}
+
+static inline void prcmu_ac_wake_req(void) {}
+
+static inline void prcmu_ac_sleep_req(void) {}
+
+static inline void db8500_prcmu_modem_reset(void) {}
+
+static inline void db8500_prcmu_system_reset(u16 reset_code) {}
+
+static inline int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
+	bool keep_ap_pll)
+{
+	return 0;
+}
+
+static inline u8 db8500_prcmu_get_power_state_result(void)
+{
+	return 0;
+}
+
+static inline void db8500_prcmu_enable_wakeups(u32 wakeups) {}
+
+static inline int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_request_clock(u8 clock, bool enable)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_set_display_clocks(void)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_disable_dsipll(void)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_enable_dsipll(void)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_config_esram0_deep_sleep(u8 state)
+{
+	return 0;
+}
+
+static inline void db8500_prcmu_config_abb_event_readout(u32 abb_events) {}
+
+static inline void db8500_prcmu_get_abb_event_buffer(void __iomem **buf) {}
+
+static inline u16 db8500_prcmu_get_reset_code(void)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_enable_a9wdog(u8 id)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_disable_a9wdog(u8 id)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_kick_a9wdog(u8 id)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_load_a9wdog(u8 id, u32 val)
+{
+	return 0;
+}
+
+static inline bool db8500_prcmu_is_ac_wake_requested(void)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_set_arm_opp(u8 opp)
+{
+	return 0;
+}
+
+static inline int db8500_prcmu_get_arm_opp(void)
+{
+	return 0;
+}
+
+static inline u32 db8500_prcmu_read(unsigned int reg)
+{
+	return 0;
+}
+
+static inline void db8500_prcmu_write(unsigned int reg, u32 value) {}
+
+static inline void db8500_prcmu_write_masked(unsigned int reg, u32 mask,
+	u32 value) {}
+
+#endif /* !CONFIG_MFD_DB8500_PRCMU */
+
+#endif /* __MFD_DB8500_PRCMU_H */
diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h
new file mode 100644
index 00000000..d7674eb7
--- /dev/null
+++ b/include/linux/mfd/dbx500-prcmu.h
@@ -0,0 +1,915 @@
+/*
+ * Copyright (C) ST Ericsson SA 2011
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * STE Ux500 PRCMU API
+ */
+#ifndef __MACH_PRCMU_H
+#define __MACH_PRCMU_H
+
+#include <linux/interrupt.h>
+#include <linux/notifier.h>
+#include <linux/err.h>
+
+/* PRCMU Wakeup defines */
+enum prcmu_wakeup_index {
+	PRCMU_WAKEUP_INDEX_RTC,
+	PRCMU_WAKEUP_INDEX_RTT0,
+	PRCMU_WAKEUP_INDEX_RTT1,
+	PRCMU_WAKEUP_INDEX_HSI0,
+	PRCMU_WAKEUP_INDEX_HSI1,
+	PRCMU_WAKEUP_INDEX_USB,
+	PRCMU_WAKEUP_INDEX_ABB,
+	PRCMU_WAKEUP_INDEX_ABB_FIFO,
+	PRCMU_WAKEUP_INDEX_ARM,
+	PRCMU_WAKEUP_INDEX_CD_IRQ,
+	NUM_PRCMU_WAKEUP_INDICES
+};
+#define PRCMU_WAKEUP(_name) (BIT(PRCMU_WAKEUP_INDEX_##_name))
+
+/* EPOD (power domain) IDs */
+
+/*
+ * DB8500 EPODs
+ * - EPOD_ID_SVAMMDSP: power domain for SVA MMDSP
+ * - EPOD_ID_SVAPIPE: power domain for SVA pipe
+ * - EPOD_ID_SIAMMDSP: power domain for SIA MMDSP
+ * - EPOD_ID_SIAPIPE: power domain for SIA pipe
+ * - EPOD_ID_SGA: power domain for SGA
+ * - EPOD_ID_B2R2_MCDE: power domain for B2R2 and MCDE
+ * - EPOD_ID_ESRAM12: power domain for ESRAM 1 and 2
+ * - EPOD_ID_ESRAM34: power domain for ESRAM 3 and 4
+ * - NUM_EPOD_ID: number of power domains
+ *
+ * TODO: These should be prefixed.
+ */
+#define EPOD_ID_SVAMMDSP	0
+#define EPOD_ID_SVAPIPE		1
+#define EPOD_ID_SIAMMDSP	2
+#define EPOD_ID_SIAPIPE		3
+#define EPOD_ID_SGA		4
+#define EPOD_ID_B2R2_MCDE	5
+#define EPOD_ID_ESRAM12		6
+#define EPOD_ID_ESRAM34		7
+#define NUM_EPOD_ID		8
+
+/*
+ * DB5500 EPODs
+ */
+#define DB5500_EPOD_ID_BASE 0x0100
+#define DB5500_EPOD_ID_SGA (DB5500_EPOD_ID_BASE + 0)
+#define DB5500_EPOD_ID_HVA (DB5500_EPOD_ID_BASE + 1)
+#define DB5500_EPOD_ID_SIA (DB5500_EPOD_ID_BASE + 2)
+#define DB5500_EPOD_ID_DISP (DB5500_EPOD_ID_BASE + 3)
+#define DB5500_EPOD_ID_ESRAM12 (DB5500_EPOD_ID_BASE + 6)
+#define DB5500_NUM_EPOD_ID 7
+
+/*
+ * state definition for EPOD (power domain)
+ * - EPOD_STATE_NO_CHANGE: The EPOD should remain unchanged
+ * - EPOD_STATE_OFF: The EPOD is switched off
+ * - EPOD_STATE_RAMRET: The EPOD is switched off with its internal RAM in
+ *                         retention
+ * - EPOD_STATE_ON_CLK_OFF: The EPOD is switched on, clock is still off
+ * - EPOD_STATE_ON: Same as above, but with clock enabled
+ */
+#define EPOD_STATE_NO_CHANGE	0x00
+#define EPOD_STATE_OFF		0x01
+#define EPOD_STATE_RAMRET	0x02
+#define EPOD_STATE_ON_CLK_OFF	0x03
+#define EPOD_STATE_ON		0x04
+
+/* DB5500 CLKOUT IDs */
+enum {
+	DB5500_CLKOUT0 = 0,
+	DB5500_CLKOUT1,
+};
+
+/* DB5500 CLKOUTx sources */
+enum {
+	DB5500_CLKOUT_REF_CLK_SEL0,
+	DB5500_CLKOUT_RTC_CLK0_SEL0,
+	DB5500_CLKOUT_ULP_CLK_SEL0,
+	DB5500_CLKOUT_STATIC0,
+	DB5500_CLKOUT_REFCLK,
+	DB5500_CLKOUT_ULPCLK,
+	DB5500_CLKOUT_ARMCLK,
+	DB5500_CLKOUT_SYSACC0CLK,
+	DB5500_CLKOUT_SOC0PLLCLK,
+	DB5500_CLKOUT_SOC1PLLCLK,
+	DB5500_CLKOUT_DDRPLLCLK,
+	DB5500_CLKOUT_TVCLK,
+	DB5500_CLKOUT_IRDACLK,
+};
+
+/*
+ * CLKOUT sources
+ */
+#define PRCMU_CLKSRC_CLK38M		0x00
+#define PRCMU_CLKSRC_ACLK		0x01
+#define PRCMU_CLKSRC_SYSCLK		0x02
+#define PRCMU_CLKSRC_LCDCLK		0x03
+#define PRCMU_CLKSRC_SDMMCCLK		0x04
+#define PRCMU_CLKSRC_TVCLK		0x05
+#define PRCMU_CLKSRC_TIMCLK		0x06
+#define PRCMU_CLKSRC_CLK009		0x07
+/* These are only valid for CLKOUT1: */
+#define PRCMU_CLKSRC_SIAMMDSPCLK	0x40
+#define PRCMU_CLKSRC_I2CCLK		0x41
+#define PRCMU_CLKSRC_MSP02CLK		0x42
+#define PRCMU_CLKSRC_ARMPLL_OBSCLK	0x43
+#define PRCMU_CLKSRC_HSIRXCLK		0x44
+#define PRCMU_CLKSRC_HSITXCLK		0x45
+#define PRCMU_CLKSRC_ARMCLKFIX		0x46
+#define PRCMU_CLKSRC_HDMICLK		0x47
+
+/*
+ * Clock identifiers.
+ */
+enum prcmu_clock {
+	PRCMU_SGACLK,
+	PRCMU_UARTCLK,
+	PRCMU_MSP02CLK,
+	PRCMU_MSP1CLK,
+	PRCMU_I2CCLK,
+	PRCMU_SDMMCCLK,
+	PRCMU_SPARE1CLK,
+	PRCMU_SLIMCLK,
+	PRCMU_PER1CLK,
+	PRCMU_PER2CLK,
+	PRCMU_PER3CLK,
+	PRCMU_PER5CLK,
+	PRCMU_PER6CLK,
+	PRCMU_PER7CLK,
+	PRCMU_LCDCLK,
+	PRCMU_BMLCLK,
+	PRCMU_HSITXCLK,
+	PRCMU_HSIRXCLK,
+	PRCMU_HDMICLK,
+	PRCMU_APEATCLK,
+	PRCMU_APETRACECLK,
+	PRCMU_MCDECLK,
+	PRCMU_IPI2CCLK,
+	PRCMU_DSIALTCLK,
+	PRCMU_DMACLK,
+	PRCMU_B2R2CLK,
+	PRCMU_TVCLK,
+	PRCMU_SSPCLK,
+	PRCMU_RNGCLK,
+	PRCMU_UICCCLK,
+	PRCMU_PWMCLK,
+	PRCMU_IRDACLK,
+	PRCMU_IRRCCLK,
+	PRCMU_SIACLK,
+	PRCMU_SVACLK,
+	PRCMU_ACLK,
+	PRCMU_NUM_REG_CLOCKS,
+	PRCMU_SYSCLK = PRCMU_NUM_REG_CLOCKS,
+	PRCMU_CDCLK,
+	PRCMU_TIMCLK,
+	PRCMU_PLLSOC0,
+	PRCMU_PLLSOC1,
+	PRCMU_PLLDDR,
+	PRCMU_PLLDSI,
+	PRCMU_DSI0CLK,
+	PRCMU_DSI1CLK,
+	PRCMU_DSI0ESCCLK,
+	PRCMU_DSI1ESCCLK,
+	PRCMU_DSI2ESCCLK,
+};
+
+/**
+ * enum ape_opp - APE OPP states definition
+ * @APE_OPP_INIT:
+ * @APE_NO_CHANGE: The APE operating point is unchanged
+ * @APE_100_OPP: The new APE operating point is ape100opp
+ * @APE_50_OPP: 50%
+ * @APE_50_PARTLY_25_OPP: 50%, except some clocks at 25%.
+ */
+enum ape_opp {
+	APE_OPP_INIT = 0x00,
+	APE_NO_CHANGE = 0x01,
+	APE_100_OPP = 0x02,
+	APE_50_OPP = 0x03,
+	APE_50_PARTLY_25_OPP = 0xFF,
+};
+
+/**
+ * enum arm_opp - ARM OPP states definition
+ * @ARM_OPP_INIT:
+ * @ARM_NO_CHANGE: The ARM operating point is unchanged
+ * @ARM_100_OPP: The new ARM operating point is arm100opp
+ * @ARM_50_OPP: The new ARM operating point is arm50opp
+ * @ARM_MAX_OPP: Operating point is "max" (more than 100)
+ * @ARM_MAX_FREQ100OPP: Set max opp if available, else 100
+ * @ARM_EXTCLK: The new ARM operating point is armExtClk
+ */
+enum arm_opp {
+	ARM_OPP_INIT = 0x00,
+	ARM_NO_CHANGE = 0x01,
+	ARM_100_OPP = 0x02,
+	ARM_50_OPP = 0x03,
+	ARM_MAX_OPP = 0x04,
+	ARM_MAX_FREQ100OPP = 0x05,
+	ARM_EXTCLK = 0x07
+};
+
+/**
+ * enum ddr_opp - DDR OPP states definition
+ * @DDR_100_OPP: The new DDR operating point is ddr100opp
+ * @DDR_50_OPP: The new DDR operating point is ddr50opp
+ * @DDR_25_OPP: The new DDR operating point is ddr25opp
+ */
+enum ddr_opp {
+	DDR_100_OPP = 0x00,
+	DDR_50_OPP = 0x01,
+	DDR_25_OPP = 0x02,
+};
+
+/*
+ * Definitions for controlling ESRAM0 in deep sleep.
+ */
+#define ESRAM0_DEEP_SLEEP_STATE_OFF 1
+#define ESRAM0_DEEP_SLEEP_STATE_RET 2
+
+/**
+ * enum ddr_pwrst - DDR power states definition
+ * @DDR_PWR_STATE_UNCHANGED: SDRAM and DDR controller state is unchanged
+ * @DDR_PWR_STATE_ON:
+ * @DDR_PWR_STATE_OFFLOWLAT:
+ * @DDR_PWR_STATE_OFFHIGHLAT:
+ */
+enum ddr_pwrst {
+	DDR_PWR_STATE_UNCHANGED     = 0x00,
+	DDR_PWR_STATE_ON            = 0x01,
+	DDR_PWR_STATE_OFFLOWLAT     = 0x02,
+	DDR_PWR_STATE_OFFHIGHLAT    = 0x03
+};
+
+#include <linux/mfd/db8500-prcmu.h>
+#include <linux/mfd/db5500-prcmu.h>
+
+#if defined(CONFIG_UX500_SOC_DB8500) || defined(CONFIG_UX500_SOC_DB5500)
+
+#include <mach/id.h>
+
+static inline void __init prcmu_early_init(void)
+{
+	if (cpu_is_u5500())
+		return db5500_prcmu_early_init();
+	else
+		return db8500_prcmu_early_init();
+}
+
+static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
+		bool keep_ap_pll)
+{
+	if (cpu_is_u5500())
+		return db5500_prcmu_set_power_state(state, keep_ulp_clk,
+			keep_ap_pll);
+	else
+		return db8500_prcmu_set_power_state(state, keep_ulp_clk,
+			keep_ap_pll);
+}
+
+static inline u8 prcmu_get_power_state_result(void)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_get_power_state_result();
+}
+
+static inline int prcmu_gic_decouple(void)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_gic_decouple();
+}
+
+static inline int prcmu_gic_recouple(void)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_gic_recouple();
+}
+
+static inline bool prcmu_gic_pending_irq(void)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_gic_pending_irq();
+}
+
+static inline bool prcmu_is_cpu_in_wfi(int cpu)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_is_cpu_in_wfi(cpu);
+}
+
+static inline int prcmu_copy_gic_settings(void)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_copy_gic_settings();
+}
+
+static inline bool prcmu_pending_irq(void)
+{
+        if (cpu_is_u5500())
+                return -EINVAL;
+        else
+                return db8500_prcmu_pending_irq();
+}
+
+static inline int prcmu_set_epod(u16 epod_id, u8 epod_state)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_set_epod(epod_id, epod_state);
+}
+
+static inline void prcmu_enable_wakeups(u32 wakeups)
+{
+	if (cpu_is_u5500())
+		db5500_prcmu_enable_wakeups(wakeups);
+	else
+		db8500_prcmu_enable_wakeups(wakeups);
+}
+
+static inline void prcmu_disable_wakeups(void)
+{
+	prcmu_enable_wakeups(0);
+}
+
+static inline void prcmu_config_abb_event_readout(u32 abb_events)
+{
+	if (cpu_is_u5500())
+		db5500_prcmu_config_abb_event_readout(abb_events);
+	else
+		db8500_prcmu_config_abb_event_readout(abb_events);
+}
+
+static inline void prcmu_get_abb_event_buffer(void __iomem **buf)
+{
+	if (cpu_is_u5500())
+		db5500_prcmu_get_abb_event_buffer(buf);
+	else
+		db8500_prcmu_get_abb_event_buffer(buf);
+}
+
+int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
+int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
+int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask, u8 size);
+
+int prcmu_config_clkout(u8 clkout, u8 source, u8 div);
+
+static inline int prcmu_request_clock(u8 clock, bool enable)
+{
+	if (cpu_is_u5500())
+		return db5500_prcmu_request_clock(clock, enable);
+	else
+		return db8500_prcmu_request_clock(clock, enable);
+}
+
+unsigned long prcmu_clock_rate(u8 clock);
+long prcmu_round_clock_rate(u8 clock, unsigned long rate);
+int prcmu_set_clock_rate(u8 clock, unsigned long rate);
+
+static inline int prcmu_set_ddr_opp(u8 opp)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_set_ddr_opp(opp);
+}
+static inline int prcmu_get_ddr_opp(void)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_get_ddr_opp();
+}
+
+static inline int prcmu_set_arm_opp(u8 opp)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_set_arm_opp(opp);
+}
+
+static inline int prcmu_get_arm_opp(void)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_get_arm_opp();
+}
+
+static inline int prcmu_set_ape_opp(u8 opp)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_set_ape_opp(opp);
+}
+
+static inline int prcmu_get_ape_opp(void)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_get_ape_opp();
+}
+
+static inline void prcmu_system_reset(u16 reset_code)
+{
+	if (cpu_is_u5500())
+		return db5500_prcmu_system_reset(reset_code);
+	else
+		return db8500_prcmu_system_reset(reset_code);
+}
+
+static inline u16 prcmu_get_reset_code(void)
+{
+	if (cpu_is_u5500())
+		return db5500_prcmu_get_reset_code();
+	else
+		return db8500_prcmu_get_reset_code();
+}
+
+void prcmu_ac_wake_req(void);
+void prcmu_ac_sleep_req(void);
+static inline void prcmu_modem_reset(void)
+{
+	if (cpu_is_u5500())
+		return;
+	else
+		return db8500_prcmu_modem_reset();
+}
+
+static inline bool prcmu_is_ac_wake_requested(void)
+{
+	if (cpu_is_u5500())
+		return db5500_prcmu_is_ac_wake_requested();
+	else
+		return db8500_prcmu_is_ac_wake_requested();
+}
+
+static inline int prcmu_set_display_clocks(void)
+{
+	if (cpu_is_u5500())
+		return db5500_prcmu_set_display_clocks();
+	else
+		return db8500_prcmu_set_display_clocks();
+}
+
+static inline int prcmu_disable_dsipll(void)
+{
+	if (cpu_is_u5500())
+		return db5500_prcmu_disable_dsipll();
+	else
+		return db8500_prcmu_disable_dsipll();
+}
+
+static inline int prcmu_enable_dsipll(void)
+{
+	if (cpu_is_u5500())
+		return db5500_prcmu_enable_dsipll();
+	else
+		return db8500_prcmu_enable_dsipll();
+}
+
+static inline int prcmu_config_esram0_deep_sleep(u8 state)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_config_esram0_deep_sleep(state);
+}
+
+static inline int prcmu_config_hotdog(u8 threshold)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_config_hotdog(threshold);
+}
+
+static inline int prcmu_config_hotmon(u8 low, u8 high)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_config_hotmon(low, high);
+}
+
+static inline int prcmu_start_temp_sense(u16 cycles32k)
+{
+	if (cpu_is_u5500())
+		return  -EINVAL;
+	else
+		return  db8500_prcmu_start_temp_sense(cycles32k);
+}
+
+static inline int prcmu_stop_temp_sense(void)
+{
+	if (cpu_is_u5500())
+		return  -EINVAL;
+	else
+		return  db8500_prcmu_stop_temp_sense();
+}
+
+static inline u32 prcmu_read(unsigned int reg)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_read(reg);
+}
+
+static inline void prcmu_write(unsigned int reg, u32 value)
+{
+	if (cpu_is_u5500())
+		return;
+	else
+		db8500_prcmu_write(reg, value);
+}
+
+static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value)
+{
+	if (cpu_is_u5500())
+		return;
+	else
+		db8500_prcmu_write_masked(reg, mask, value);
+}
+
+static inline int prcmu_enable_a9wdog(u8 id)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_enable_a9wdog(id);
+}
+
+static inline int prcmu_disable_a9wdog(u8 id)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_disable_a9wdog(id);
+}
+
+static inline int prcmu_kick_a9wdog(u8 id)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_kick_a9wdog(id);
+}
+
+static inline int prcmu_load_a9wdog(u8 id, u32 timeout)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_load_a9wdog(id, timeout);
+}
+
+static inline int prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
+{
+	if (cpu_is_u5500())
+		return -EINVAL;
+	else
+		return db8500_prcmu_config_a9wdog(num, sleep_auto_off);
+}
+#else
+
+static inline void __init prcmu_early_init(void) {}
+
+static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
+	bool keep_ap_pll)
+{
+	return 0;
+}
+
+static inline int prcmu_set_epod(u16 epod_id, u8 epod_state)
+{
+	return 0;
+}
+
+static inline void prcmu_enable_wakeups(u32 wakeups) {}
+
+static inline void prcmu_disable_wakeups(void) {}
+
+static inline int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
+{
+	return -ENOSYS;
+}
+
+static inline int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
+{
+	return -ENOSYS;
+}
+
+static inline int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask,
+	u8 size)
+{
+	return -ENOSYS;
+}
+
+static inline int prcmu_config_clkout(u8 clkout, u8 source, u8 div)
+{
+	return 0;
+}
+
+static inline int prcmu_request_clock(u8 clock, bool enable)
+{
+	return 0;
+}
+
+static inline long prcmu_round_clock_rate(u8 clock, unsigned long rate)
+{
+	return 0;
+}
+
+static inline int prcmu_set_clock_rate(u8 clock, unsigned long rate)
+{
+	return 0;
+}
+
+static inline unsigned long prcmu_clock_rate(u8 clock)
+{
+	return 0;
+}
+
+static inline int prcmu_set_ape_opp(u8 opp)
+{
+	return 0;
+}
+
+static inline int prcmu_get_ape_opp(void)
+{
+	return APE_100_OPP;
+}
+
+static inline int prcmu_set_arm_opp(u8 opp)
+{
+	return 0;
+}
+
+static inline int prcmu_get_arm_opp(void)
+{
+	return ARM_100_OPP;
+}
+
+static inline int prcmu_set_ddr_opp(u8 opp)
+{
+	return 0;
+}
+
+static inline int prcmu_get_ddr_opp(void)
+{
+	return DDR_100_OPP;
+}
+
+static inline void prcmu_system_reset(u16 reset_code) {}
+
+static inline u16 prcmu_get_reset_code(void)
+{
+	return 0;
+}
+
+static inline void prcmu_ac_wake_req(void) {}
+
+static inline void prcmu_ac_sleep_req(void) {}
+
+static inline void prcmu_modem_reset(void) {}
+
+static inline bool prcmu_is_ac_wake_requested(void)
+{
+	return false;
+}
+
+static inline int prcmu_set_display_clocks(void)
+{
+	return 0;
+}
+
+static inline int prcmu_disable_dsipll(void)
+{
+	return 0;
+}
+
+static inline int prcmu_enable_dsipll(void)
+{
+	return 0;
+}
+
+static inline int prcmu_config_esram0_deep_sleep(u8 state)
+{
+	return 0;
+}
+
+static inline void prcmu_config_abb_event_readout(u32 abb_events) {}
+
+static inline void prcmu_get_abb_event_buffer(void __iomem **buf)
+{
+	*buf = NULL;
+}
+
+static inline int prcmu_config_hotdog(u8 threshold)
+{
+	return 0;
+}
+
+static inline int prcmu_config_hotmon(u8 low, u8 high)
+{
+	return 0;
+}
+
+static inline int prcmu_start_temp_sense(u16 cycles32k)
+{
+	return 0;
+}
+
+static inline int prcmu_stop_temp_sense(void)
+{
+	return 0;
+}
+
+static inline u32 prcmu_read(unsigned int reg)
+{
+	return 0;
+}
+
+static inline void prcmu_write(unsigned int reg, u32 value) {}
+
+static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value) {}
+
+#endif
+
+static inline void prcmu_set(unsigned int reg, u32 bits)
+{
+	prcmu_write_masked(reg, bits, bits);
+}
+
+static inline void prcmu_clear(unsigned int reg, u32 bits)
+{
+	prcmu_write_masked(reg, bits, 0);
+}
+
+#if defined(CONFIG_UX500_SOC_DB8500) || defined(CONFIG_UX500_SOC_DB5500)
+
+/**
+ * prcmu_enable_spi2 - Enables pin muxing for SPI2 on OtherAlternateC1.
+ */
+static inline void prcmu_enable_spi2(void)
+{
+	if (cpu_is_u8500())
+		prcmu_set(DB8500_PRCM_GPIOCR, DB8500_PRCM_GPIOCR_SPI2_SELECT);
+}
+
+/**
+ * prcmu_disable_spi2 - Disables pin muxing for SPI2 on OtherAlternateC1.
+ */
+static inline void prcmu_disable_spi2(void)
+{
+	if (cpu_is_u8500())
+		prcmu_clear(DB8500_PRCM_GPIOCR, DB8500_PRCM_GPIOCR_SPI2_SELECT);
+}
+
+/**
+ * prcmu_enable_stm_mod_uart - Enables pin muxing for STMMOD
+ * and UARTMOD on OtherAlternateC3.
+ */
+static inline void prcmu_enable_stm_mod_uart(void)
+{
+	if (cpu_is_u8500()) {
+		prcmu_set(DB8500_PRCM_GPIOCR,
+			(DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 |
+			 DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0));
+	}
+}
+
+/**
+ * prcmu_disable_stm_mod_uart - Disables pin muxing for STMMOD
+ * and UARTMOD on OtherAlternateC3.
+ */
+static inline void prcmu_disable_stm_mod_uart(void)
+{
+	if (cpu_is_u8500()) {
+		prcmu_clear(DB8500_PRCM_GPIOCR,
+			(DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 |
+			 DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0));
+	}
+}
+
+/**
+ * prcmu_enable_stm_ape - Enables pin muxing for STM APE on OtherAlternateC1.
+ */
+static inline void prcmu_enable_stm_ape(void)
+{
+	if (cpu_is_u8500()) {
+		prcmu_set(DB8500_PRCM_GPIOCR,
+			DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD);
+	}
+}
+
+/**
+ * prcmu_disable_stm_ape - Disables pin muxing for STM APE on OtherAlternateC1.
+ */
+static inline void prcmu_disable_stm_ape(void)
+{
+	if (cpu_is_u8500()) {
+		prcmu_clear(DB8500_PRCM_GPIOCR,
+			DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD);
+	}
+}
+
+#else
+
+static inline void prcmu_enable_spi2(void) {}
+static inline void prcmu_disable_spi2(void) {}
+static inline void prcmu_enable_stm_mod_uart(void) {}
+static inline void prcmu_disable_stm_mod_uart(void) {}
+static inline void prcmu_enable_stm_ape(void) {}
+static inline void prcmu_disable_stm_ape(void) {}
+
+#endif
+
+/* PRCMU QoS APE OPP class */
+#define PRCMU_QOS_APE_OPP 1
+#define PRCMU_QOS_DDR_OPP 2
+#define PRCMU_QOS_ARM_OPP 3
+#define PRCMU_QOS_DEFAULT_VALUE -1
+
+#ifdef CONFIG_DBX500_PRCMU_QOS_POWER
+
+unsigned long prcmu_qos_get_cpufreq_opp_delay(void);
+void prcmu_qos_set_cpufreq_opp_delay(unsigned long);
+void prcmu_qos_force_opp(int, s32);
+int prcmu_qos_requirement(int pm_qos_class);
+int prcmu_qos_add_requirement(int pm_qos_class, char *name, s32 value);
+int prcmu_qos_update_requirement(int pm_qos_class, char *name, s32 new_value);
+void prcmu_qos_remove_requirement(int pm_qos_class, char *name);
+int prcmu_qos_add_notifier(int prcmu_qos_class,
+			   struct notifier_block *notifier);
+int prcmu_qos_remove_notifier(int prcmu_qos_class,
+			      struct notifier_block *notifier);
+
+#else
+
+static inline unsigned long prcmu_qos_get_cpufreq_opp_delay(void)
+{
+	return 0;
+}
+
+static inline void prcmu_qos_set_cpufreq_opp_delay(unsigned long n) {}
+
+static inline void prcmu_qos_force_opp(int prcmu_qos_class, s32 i) {}
+
+static inline int prcmu_qos_requirement(int prcmu_qos_class)
+{
+	return 0;
+}
+
+static inline int prcmu_qos_add_requirement(int prcmu_qos_class,
+					    char *name, s32 value)
+{
+	return 0;
+}
+
+static inline int prcmu_qos_update_requirement(int prcmu_qos_class,
+					       char *name, s32 new_value)
+{
+	return 0;
+}
+
+static inline void prcmu_qos_remove_requirement(int prcmu_qos_class, char *name)
+{
+}
+
+static inline int prcmu_qos_add_notifier(int prcmu_qos_class,
+					 struct notifier_block *notifier)
+{
+	return 0;
+}
+static inline int prcmu_qos_remove_notifier(int prcmu_qos_class,
+					    struct notifier_block *notifier)
+{
+	return 0;
+}
+
+#endif
+
+#endif /* __MACH_PRCMU_H */
diff --git a/include/linux/mfd/ds1wm.h b/include/linux/mfd/ds1wm.h
new file mode 100644
index 00000000..38a372a0
--- /dev/null
+++ b/include/linux/mfd/ds1wm.h
@@ -0,0 +1,13 @@
+/* MFD cell driver data for the DS1WM driver */
+
+struct ds1wm_driver_data {
+	int active_high;
+	int clock_rate;
+	/* in milliseconds, the amount of time to */
+	/* sleep following a reset pulse. Zero    */
+	/* should work if your bus devices recover*/
+	/* time respects the 1-wire spec since the*/
+	/* ds1wm implements the precise timings of*/
+	/* a reset pulse/presence detect sequence.*/
+	unsigned int reset_recover_delay;
+};
diff --git a/include/linux/mfd/ezx-pcap.h b/include/linux/mfd/ezx-pcap.h
new file mode 100644
index 00000000..40c37216
--- /dev/null
+++ b/include/linux/mfd/ezx-pcap.h
@@ -0,0 +1,252 @@
+/*
+ * Copyright 2009 Daniel Ribeiro <drwyrm@gmail.com>
+ *
+ * For further information, please see http://wiki.openezx.org/PCAP2
+ */
+
+#ifndef EZX_PCAP_H
+#define EZX_PCAP_H
+
+struct pcap_subdev {
+	int id;
+	const char *name;
+	void *platform_data;
+};
+
+struct pcap_platform_data {
+	unsigned int irq_base;
+	unsigned int config;
+	void (*init) (void *);	/* board specific init */
+	int num_subdevs;
+	struct pcap_subdev *subdevs;
+};
+
+struct pcap_chip;
+
+int ezx_pcap_write(struct pcap_chip *, u8, u32);
+int ezx_pcap_read(struct pcap_chip *, u8, u32 *);
+int ezx_pcap_set_bits(struct pcap_chip *, u8, u32, u32);
+int pcap_to_irq(struct pcap_chip *, int);
+int irq_to_pcap(struct pcap_chip *, int);
+int pcap_adc_async(struct pcap_chip *, u8, u32, u8[], void *, void *);
+int pcap_adc_sync(struct pcap_chip *, u8, u32, u8[], u16[]);
+void pcap_set_ts_bits(struct pcap_chip *, u32);
+
+#define PCAP_SECOND_PORT	1
+#define PCAP_CS_AH		2
+
+#define PCAP_REGISTER_WRITE_OP_BIT	0x80000000
+#define PCAP_REGISTER_READ_OP_BIT	0x00000000
+
+#define PCAP_REGISTER_VALUE_MASK	0x01ffffff
+#define PCAP_REGISTER_ADDRESS_MASK	0x7c000000
+#define PCAP_REGISTER_ADDRESS_SHIFT	26
+#define PCAP_REGISTER_NUMBER		32
+#define PCAP_CLEAR_INTERRUPT_REGISTER	0x01ffffff
+#define PCAP_MASK_ALL_INTERRUPT		0x01ffffff
+
+/* registers accessible by both pcap ports */
+#define PCAP_REG_ISR		0x0	/* Interrupt Status */
+#define PCAP_REG_MSR		0x1	/* Interrupt Mask */
+#define PCAP_REG_PSTAT		0x2	/* Processor Status */
+#define PCAP_REG_VREG2		0x6	/* Regulator Bank 2 Control */
+#define PCAP_REG_AUXVREG	0x7	/* Auxiliary Regulator Control */
+#define PCAP_REG_BATT		0x8	/* Battery Control */
+#define PCAP_REG_ADC		0x9	/* AD Control */
+#define PCAP_REG_ADR		0xa	/* AD Result */
+#define PCAP_REG_CODEC		0xb	/* Audio Codec Control */
+#define PCAP_REG_RX_AMPS	0xc	/* RX Audio Amplifiers Control */
+#define PCAP_REG_ST_DAC		0xd	/* Stereo DAC Control */
+#define PCAP_REG_BUSCTRL	0x14	/* Connectivity Control */
+#define PCAP_REG_PERIPH		0x15	/* Peripheral Control */
+#define PCAP_REG_LOWPWR		0x18	/* Regulator Low Power Control */
+#define PCAP_REG_TX_AMPS	0x1a	/* TX Audio Amplifiers Control */
+#define PCAP_REG_GP		0x1b	/* General Purpose */
+#define PCAP_REG_TEST1		0x1c
+#define PCAP_REG_TEST2		0x1d
+#define PCAP_REG_VENDOR_TEST1	0x1e
+#define PCAP_REG_VENDOR_TEST2	0x1f
+
+/* registers accessible by pcap port 1 only (a1200, e2 & e6) */
+#define PCAP_REG_INT_SEL	0x3	/* Interrupt Select */
+#define PCAP_REG_SWCTRL		0x4	/* Switching Regulator Control */
+#define PCAP_REG_VREG1		0x5	/* Regulator Bank 1 Control */
+#define PCAP_REG_RTC_TOD	0xe	/* RTC Time of Day */
+#define PCAP_REG_RTC_TODA	0xf	/* RTC Time of Day Alarm */
+#define PCAP_REG_RTC_DAY	0x10	/* RTC Day */
+#define PCAP_REG_RTC_DAYA	0x11	/* RTC Day Alarm */
+#define PCAP_REG_MTRTMR		0x12	/* AD Monitor Timer */
+#define PCAP_REG_PWR		0x13	/* Power Control */
+#define PCAP_REG_AUXVREG_MASK	0x16	/* Auxiliary Regulator Mask */
+#define PCAP_REG_VENDOR_REV	0x17
+#define PCAP_REG_PERIPH_MASK	0x19	/* Peripheral Mask */
+
+/* PCAP2 Interrupts */
+#define PCAP_NIRQS		23
+#define PCAP_IRQ_ADCDONE	0	/* ADC done port 1 */
+#define PCAP_IRQ_TS		1	/* Touch Screen */
+#define PCAP_IRQ_1HZ		2	/* 1HZ timer */
+#define PCAP_IRQ_WH		3	/* ADC above high limit */
+#define PCAP_IRQ_WL		4	/* ADC below low limit */
+#define PCAP_IRQ_TODA		5	/* Time of day alarm */
+#define PCAP_IRQ_USB4V		6	/* USB above 4V */
+#define PCAP_IRQ_ONOFF		7	/* On/Off button */
+#define PCAP_IRQ_ONOFF2		8	/* On/Off button 2 */
+#define PCAP_IRQ_USB1V		9	/* USB above 1V */
+#define PCAP_IRQ_MOBPORT	10
+#define PCAP_IRQ_MIC		11	/* Mic attach/HS button */
+#define PCAP_IRQ_HS		12	/* Headset attach */
+#define PCAP_IRQ_ST		13
+#define PCAP_IRQ_PC		14	/* Power Cut */
+#define PCAP_IRQ_WARM		15
+#define PCAP_IRQ_EOL		16	/* Battery End Of Life */
+#define PCAP_IRQ_CLK		17
+#define PCAP_IRQ_SYSRST		18	/* System Reset */
+#define PCAP_IRQ_DUMMY		19
+#define PCAP_IRQ_ADCDONE2	20	/* ADC done port 2 */
+#define PCAP_IRQ_SOFTRESET	21
+#define PCAP_IRQ_MNEXB		22
+
+/* voltage regulators */
+#define V1		0
+#define V2		1
+#define V3		2
+#define V4		3
+#define V5		4
+#define V6		5
+#define V7		6
+#define V8		7
+#define V9		8
+#define V10		9
+#define VAUX1		10
+#define VAUX2		11
+#define VAUX3		12
+#define VAUX4		13
+#define VSIM		14
+#define VSIM2		15
+#define VVIB		16
+#define SW1		17
+#define SW2		18
+#define SW3		19
+#define SW1S		20
+#define SW2S		21
+
+#define PCAP_BATT_DAC_MASK		0x000000ff
+#define PCAP_BATT_DAC_SHIFT		0
+#define PCAP_BATT_B_FDBK		(1 << 8)
+#define PCAP_BATT_EXT_ISENSE		(1 << 9)
+#define PCAP_BATT_V_COIN_MASK		0x00003c00
+#define PCAP_BATT_V_COIN_SHIFT		10
+#define PCAP_BATT_I_COIN		(1 << 14)
+#define PCAP_BATT_COIN_CH_EN		(1 << 15)
+#define PCAP_BATT_EOL_SEL_MASK		0x000e0000
+#define PCAP_BATT_EOL_SEL_SHIFT		17
+#define PCAP_BATT_EOL_CMP_EN		(1 << 20)
+#define PCAP_BATT_BATT_DET_EN		(1 << 21)
+#define PCAP_BATT_THERMBIAS_CTRL	(1 << 22)
+
+#define PCAP_ADC_ADEN			(1 << 0)
+#define PCAP_ADC_RAND			(1 << 1)
+#define PCAP_ADC_AD_SEL1		(1 << 2)
+#define PCAP_ADC_AD_SEL2		(1 << 3)
+#define PCAP_ADC_ADA1_MASK		0x00000070
+#define PCAP_ADC_ADA1_SHIFT		4
+#define PCAP_ADC_ADA2_MASK		0x00000380
+#define PCAP_ADC_ADA2_SHIFT		7
+#define PCAP_ADC_ATO_MASK		0x00003c00
+#define PCAP_ADC_ATO_SHIFT		10
+#define PCAP_ADC_ATOX			(1 << 14)
+#define PCAP_ADC_MTR1			(1 << 15)
+#define PCAP_ADC_MTR2			(1 << 16)
+#define PCAP_ADC_TS_M_MASK		0x000e0000
+#define PCAP_ADC_TS_M_SHIFT		17
+#define PCAP_ADC_TS_REF_LOWPWR		(1 << 20)
+#define PCAP_ADC_TS_REFENB		(1 << 21)
+#define PCAP_ADC_BATT_I_POLARITY	(1 << 22)
+#define PCAP_ADC_BATT_I_ADC		(1 << 23)
+
+#define PCAP_ADC_BANK_0			0
+#define PCAP_ADC_BANK_1			1
+/* ADC bank 0 */
+#define PCAP_ADC_CH_COIN		0
+#define PCAP_ADC_CH_BATT		1
+#define PCAP_ADC_CH_BPLUS		2
+#define PCAP_ADC_CH_MOBPORTB		3
+#define PCAP_ADC_CH_TEMPERATURE		4
+#define PCAP_ADC_CH_CHARGER_ID		5
+#define PCAP_ADC_CH_AD6			6
+/* ADC bank 1 */
+#define PCAP_ADC_CH_AD7			0
+#define PCAP_ADC_CH_AD8			1
+#define PCAP_ADC_CH_AD9			2
+#define PCAP_ADC_CH_TS_X1		3
+#define PCAP_ADC_CH_TS_X2		4
+#define PCAP_ADC_CH_TS_Y1		5
+#define PCAP_ADC_CH_TS_Y2		6
+
+#define PCAP_ADC_T_NOW			0
+#define PCAP_ADC_T_IN_BURST		1
+#define PCAP_ADC_T_OUT_BURST		2
+
+#define PCAP_ADC_ATO_IN_BURST		6
+#define PCAP_ADC_ATO_OUT_BURST		0
+
+#define PCAP_ADC_TS_M_XY		1
+#define PCAP_ADC_TS_M_PRESSURE		2
+#define PCAP_ADC_TS_M_PLATE_X		3
+#define PCAP_ADC_TS_M_PLATE_Y		4
+#define PCAP_ADC_TS_M_STANDBY		5
+#define PCAP_ADC_TS_M_NONTS		6
+
+#define PCAP_ADR_ADD1_MASK		0x000003ff
+#define PCAP_ADR_ADD1_SHIFT		0
+#define PCAP_ADR_ADD2_MASK		0x000ffc00
+#define PCAP_ADR_ADD2_SHIFT		10
+#define PCAP_ADR_ADINC1			(1 << 20)
+#define PCAP_ADR_ADINC2			(1 << 21)
+#define PCAP_ADR_ASC			(1 << 22)
+#define PCAP_ADR_ONESHOT		(1 << 23)
+
+#define PCAP_BUSCTRL_FSENB		(1 << 0)
+#define PCAP_BUSCTRL_USB_SUSPEND	(1 << 1)
+#define PCAP_BUSCTRL_USB_PU		(1 << 2)
+#define PCAP_BUSCTRL_USB_PD		(1 << 3)
+#define PCAP_BUSCTRL_VUSB_EN		(1 << 4)
+#define PCAP_BUSCTRL_USB_PS		(1 << 5)
+#define PCAP_BUSCTRL_VUSB_MSTR_EN	(1 << 6)
+#define PCAP_BUSCTRL_VBUS_PD_ENB	(1 << 7)
+#define PCAP_BUSCTRL_CURRLIM		(1 << 8)
+#define PCAP_BUSCTRL_RS232ENB		(1 << 9)
+#define PCAP_BUSCTRL_RS232_DIR		(1 << 10)
+#define PCAP_BUSCTRL_SE0_CONN		(1 << 11)
+#define PCAP_BUSCTRL_USB_PDM		(1 << 12)
+#define PCAP_BUSCTRL_BUS_PRI_ADJ	(1 << 24)
+
+/* leds */
+#define PCAP_LED0		0
+#define PCAP_LED1		1
+#define PCAP_BL0		2
+#define PCAP_BL1		3
+#define PCAP_LED_3MA		0
+#define PCAP_LED_4MA		1
+#define PCAP_LED_5MA		2
+#define PCAP_LED_9MA		3
+#define PCAP_LED_T_MASK		0xf
+#define PCAP_LED_C_MASK		0x3
+#define PCAP_BL_MASK		0x1f
+#define PCAP_BL0_SHIFT		0
+#define PCAP_LED0_EN		(1 << 5)
+#define PCAP_LED1_EN		(1 << 6)
+#define PCAP_LED0_T_SHIFT	7
+#define PCAP_LED1_T_SHIFT	11
+#define PCAP_LED0_C_SHIFT	15
+#define PCAP_LED1_C_SHIFT	17
+#define PCAP_BL1_SHIFT		20
+
+/* RTC */
+#define PCAP_RTC_DAY_MASK	0x3fff
+#define PCAP_RTC_TOD_MASK	0xffff
+#define PCAP_RTC_PC_MASK	0x7
+#define SEC_PER_DAY		86400
+
+#endif
diff --git a/include/linux/mfd/htc-egpio.h b/include/linux/mfd/htc-egpio.h
new file mode 100644
index 00000000..b4201c97
--- /dev/null
+++ b/include/linux/mfd/htc-egpio.h
@@ -0,0 +1,57 @@
+/*
+ * HTC simple EGPIO irq and gpio extender
+ */
+
+#ifndef __HTC_EGPIO_H__
+#define __HTC_EGPIO_H__
+
+#include <linux/gpio.h>
+
+/* Descriptive values for all-in or all-out htc_egpio_chip descriptors. */
+#define HTC_EGPIO_OUTPUT (~0)
+#define HTC_EGPIO_INPUT  0
+
+/**
+ * struct htc_egpio_chip - descriptor to create gpio_chip for register range
+ * @reg_start: index of first register
+ * @gpio_base: gpio number of first pin in this register range
+ * @num_gpios: number of gpios in this register range, max BITS_PER_LONG
+ *    (number of registers = DIV_ROUND_UP(num_gpios, reg_width))
+ * @direction: bitfield, '0' = input, '1' = output,
+ */
+struct htc_egpio_chip {
+	int           reg_start;
+	int           gpio_base;
+	int           num_gpios;
+	unsigned long direction;
+	unsigned long initial_values;
+};
+
+/**
+ * struct htc_egpio_platform_data - description provided by the arch
+ * @irq_base: beginning of available IRQs (eg, IRQ_BOARD_START)
+ * @num_irqs: number of irqs
+ * @reg_width: number of bits per register, either 8 or 16 bit
+ * @bus_width: alignment of the registers, either 16 or 32 bit
+ * @invert_acks: set if chip requires writing '0' to ack an irq, instead of '1'
+ * @ack_register: location of the irq/ack register
+ * @chip: pointer to array of htc_egpio_chip descriptors
+ * @num_chips: number of egpio chip descriptors
+ */
+struct htc_egpio_platform_data {
+	int                   bus_width;
+	int                   reg_width;
+
+	int                   irq_base;
+	int                   num_irqs;
+	int                   invert_acks;
+	int                   ack_register;
+
+	struct htc_egpio_chip *chip;
+	int                   num_chips;
+};
+
+/* Determine the wakeup irq, to be called during early resume */
+extern int htc_egpio_get_wakeup_irq(struct device *dev);
+
+#endif
diff --git a/include/linux/mfd/htc-pasic3.h b/include/linux/mfd/htc-pasic3.h
new file mode 100644
index 00000000..3d3ed67b
--- /dev/null
+++ b/include/linux/mfd/htc-pasic3.h
@@ -0,0 +1,54 @@
+/*
+ * HTC PASIC3 driver - LEDs and DS1WM
+ *
+ * Copyright (c) 2007 Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ */
+
+#ifndef __PASIC3_H
+#define __PASIC3_H
+
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+
+extern void pasic3_write_register(struct device *dev, u32 reg, u8 val);
+extern u8 pasic3_read_register(struct device *dev, u32 reg);
+
+/*
+ * mask for registers 0x20,0x21,0x22
+ */
+#define PASIC3_MASK_LED0 0x04
+#define PASIC3_MASK_LED1 0x08
+#define PASIC3_MASK_LED2 0x40
+
+/*
+ * bits in register 0x06
+ */
+#define PASIC3_BIT2_LED0 0x08
+#define PASIC3_BIT2_LED1 0x10
+#define PASIC3_BIT2_LED2 0x20
+
+struct pasic3_led {
+	struct led_classdev         led;
+	unsigned int                hw_num;
+	unsigned int                bit2;
+	unsigned int                mask;
+	struct pasic3_leds_machinfo *pdata;
+};
+
+struct pasic3_leds_machinfo {
+	unsigned int      num_leds;
+	unsigned int      power_gpio;
+	struct pasic3_led *leds;
+};
+
+struct pasic3_platform_data {
+	struct pasic3_leds_machinfo *led_pdata;
+	unsigned int                 clock_rate;
+};
+
+#endif
diff --git a/include/linux/mfd/intel_msic.h b/include/linux/mfd/intel_msic.h
new file mode 100644
index 00000000..439a7a61
--- /dev/null
+++ b/include/linux/mfd/intel_msic.h
@@ -0,0 +1,456 @@
+/*
+ * include/linux/mfd/intel_msic.h - Core interface for Intel MSIC
+ *
+ * Copyright (C) 2011, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_MFD_INTEL_MSIC_H__
+#define __LINUX_MFD_INTEL_MSIC_H__
+
+/* ID */
+#define INTEL_MSIC_ID0			0x000	/* RO */
+#define INTEL_MSIC_ID1			0x001	/* RO */
+
+/* IRQ */
+#define INTEL_MSIC_IRQLVL1		0x002
+#define INTEL_MSIC_ADC1INT		0x003
+#define INTEL_MSIC_CCINT		0x004
+#define INTEL_MSIC_PWRSRCINT		0x005
+#define INTEL_MSIC_PWRSRCINT1		0x006
+#define INTEL_MSIC_CHRINT		0x007
+#define INTEL_MSIC_CHRINT1		0x008
+#define INTEL_MSIC_RTCIRQ		0x009
+#define INTEL_MSIC_GPIO0LVIRQ		0x00a
+#define INTEL_MSIC_GPIO1LVIRQ		0x00b
+#define INTEL_MSIC_GPIOHVIRQ		0x00c
+#define INTEL_MSIC_VRINT		0x00d
+#define INTEL_MSIC_OCAUDIO		0x00e
+#define INTEL_MSIC_ACCDET		0x00f
+#define INTEL_MSIC_RESETIRQ1		0x010
+#define INTEL_MSIC_RESETIRQ2		0x011
+#define INTEL_MSIC_MADC1INT		0x012
+#define INTEL_MSIC_MCCINT		0x013
+#define INTEL_MSIC_MPWRSRCINT		0x014
+#define INTEL_MSIC_MPWRSRCINT1		0x015
+#define INTEL_MSIC_MCHRINT		0x016
+#define INTEL_MSIC_MCHRINT1		0x017
+#define INTEL_MSIC_RTCIRQMASK		0x018
+#define INTEL_MSIC_GPIO0LVIRQMASK	0x019
+#define INTEL_MSIC_GPIO1LVIRQMASK	0x01a
+#define INTEL_MSIC_GPIOHVIRQMASK	0x01b
+#define INTEL_MSIC_VRINTMASK		0x01c
+#define INTEL_MSIC_OCAUDIOMASK		0x01d
+#define INTEL_MSIC_ACCDETMASK		0x01e
+#define INTEL_MSIC_RESETIRQ1MASK	0x01f
+#define INTEL_MSIC_RESETIRQ2MASK	0x020
+#define INTEL_MSIC_IRQLVL1MSK		0x021
+#define INTEL_MSIC_PBCONFIG		0x03e
+#define INTEL_MSIC_PBSTATUS		0x03f	/* RO */
+
+/* GPIO */
+#define INTEL_MSIC_GPIO0LV7CTLO		0x040
+#define INTEL_MSIC_GPIO0LV6CTLO		0x041
+#define INTEL_MSIC_GPIO0LV5CTLO		0x042
+#define INTEL_MSIC_GPIO0LV4CTLO		0x043
+#define INTEL_MSIC_GPIO0LV3CTLO		0x044
+#define INTEL_MSIC_GPIO0LV2CTLO		0x045
+#define INTEL_MSIC_GPIO0LV1CTLO		0x046
+#define INTEL_MSIC_GPIO0LV0CTLO		0x047
+#define INTEL_MSIC_GPIO1LV7CTLOS	0x048
+#define INTEL_MSIC_GPIO1LV6CTLO		0x049
+#define INTEL_MSIC_GPIO1LV5CTLO		0x04a
+#define INTEL_MSIC_GPIO1LV4CTLO		0x04b
+#define INTEL_MSIC_GPIO1LV3CTLO		0x04c
+#define INTEL_MSIC_GPIO1LV2CTLO		0x04d
+#define INTEL_MSIC_GPIO1LV1CTLO		0x04e
+#define INTEL_MSIC_GPIO1LV0CTLO		0x04f
+#define INTEL_MSIC_GPIO0LV7CTLI		0x050
+#define INTEL_MSIC_GPIO0LV6CTLI		0x051
+#define INTEL_MSIC_GPIO0LV5CTLI		0x052
+#define INTEL_MSIC_GPIO0LV4CTLI		0x053
+#define INTEL_MSIC_GPIO0LV3CTLI		0x054
+#define INTEL_MSIC_GPIO0LV2CTLI		0x055
+#define INTEL_MSIC_GPIO0LV1CTLI		0x056
+#define INTEL_MSIC_GPIO0LV0CTLI		0x057
+#define INTEL_MSIC_GPIO1LV7CTLIS	0x058
+#define INTEL_MSIC_GPIO1LV6CTLI		0x059
+#define INTEL_MSIC_GPIO1LV5CTLI		0x05a
+#define INTEL_MSIC_GPIO1LV4CTLI		0x05b
+#define INTEL_MSIC_GPIO1LV3CTLI		0x05c
+#define INTEL_MSIC_GPIO1LV2CTLI		0x05d
+#define INTEL_MSIC_GPIO1LV1CTLI		0x05e
+#define INTEL_MSIC_GPIO1LV0CTLI		0x05f
+#define INTEL_MSIC_PWM0CLKDIV1		0x061
+#define INTEL_MSIC_PWM0CLKDIV0		0x062
+#define INTEL_MSIC_PWM1CLKDIV1		0x063
+#define INTEL_MSIC_PWM1CLKDIV0		0x064
+#define INTEL_MSIC_PWM2CLKDIV1		0x065
+#define INTEL_MSIC_PWM2CLKDIV0		0x066
+#define INTEL_MSIC_PWM0DUTYCYCLE	0x067
+#define INTEL_MSIC_PWM1DUTYCYCLE	0x068
+#define INTEL_MSIC_PWM2DUTYCYCLE	0x069
+#define INTEL_MSIC_GPIO0HV3CTLO		0x06d
+#define INTEL_MSIC_GPIO0HV2CTLO		0x06e
+#define INTEL_MSIC_GPIO0HV1CTLO		0x06f
+#define INTEL_MSIC_GPIO0HV0CTLO		0x070
+#define INTEL_MSIC_GPIO1HV3CTLO		0x071
+#define INTEL_MSIC_GPIO1HV2CTLO		0x072
+#define INTEL_MSIC_GPIO1HV1CTLO		0x073
+#define INTEL_MSIC_GPIO1HV0CTLO		0x074
+#define INTEL_MSIC_GPIO0HV3CTLI		0x075
+#define INTEL_MSIC_GPIO0HV2CTLI		0x076
+#define INTEL_MSIC_GPIO0HV1CTLI		0x077
+#define INTEL_MSIC_GPIO0HV0CTLI		0x078
+#define INTEL_MSIC_GPIO1HV3CTLI		0x079
+#define INTEL_MSIC_GPIO1HV2CTLI		0x07a
+#define INTEL_MSIC_GPIO1HV1CTLI		0x07b
+#define INTEL_MSIC_GPIO1HV0CTLI		0x07c
+
+/* SVID */
+#define INTEL_MSIC_SVIDCTRL0		0x080
+#define INTEL_MSIC_SVIDCTRL1		0x081
+#define INTEL_MSIC_SVIDCTRL2		0x082
+#define INTEL_MSIC_SVIDTXLASTPKT3	0x083	/* RO */
+#define INTEL_MSIC_SVIDTXLASTPKT2	0x084	/* RO */
+#define INTEL_MSIC_SVIDTXLASTPKT1	0x085	/* RO */
+#define INTEL_MSIC_SVIDTXLASTPKT0	0x086	/* RO */
+#define INTEL_MSIC_SVIDPKTOUTBYTE3	0x087
+#define INTEL_MSIC_SVIDPKTOUTBYTE2	0x088
+#define INTEL_MSIC_SVIDPKTOUTBYTE1	0x089
+#define INTEL_MSIC_SVIDPKTOUTBYTE0	0x08a
+#define INTEL_MSIC_SVIDRXVPDEBUG1	0x08b
+#define INTEL_MSIC_SVIDRXVPDEBUG0	0x08c
+#define INTEL_MSIC_SVIDRXLASTPKT3	0x08d	/* RO */
+#define INTEL_MSIC_SVIDRXLASTPKT2	0x08e	/* RO */
+#define INTEL_MSIC_SVIDRXLASTPKT1	0x08f	/* RO */
+#define INTEL_MSIC_SVIDRXLASTPKT0	0x090	/* RO */
+#define INTEL_MSIC_SVIDRXCHKSTATUS3	0x091	/* RO */
+#define INTEL_MSIC_SVIDRXCHKSTATUS2	0x092	/* RO */
+#define INTEL_MSIC_SVIDRXCHKSTATUS1	0x093	/* RO */
+#define INTEL_MSIC_SVIDRXCHKSTATUS0	0x094	/* RO */
+
+/* VREG */
+#define INTEL_MSIC_VCCLATCH		0x0c0
+#define INTEL_MSIC_VNNLATCH		0x0c1
+#define INTEL_MSIC_VCCCNT		0x0c2
+#define INTEL_MSIC_SMPSRAMP		0x0c3
+#define INTEL_MSIC_VNNCNT		0x0c4
+#define INTEL_MSIC_VNNAONCNT		0x0c5
+#define INTEL_MSIC_VCC122AONCNT		0x0c6
+#define INTEL_MSIC_V180AONCNT		0x0c7
+#define INTEL_MSIC_V500CNT		0x0c8
+#define INTEL_MSIC_VIHFCNT		0x0c9
+#define INTEL_MSIC_LDORAMP1		0x0ca
+#define INTEL_MSIC_LDORAMP2		0x0cb
+#define INTEL_MSIC_VCC108AONCNT		0x0cc
+#define INTEL_MSIC_VCC108ASCNT		0x0cd
+#define INTEL_MSIC_VCC108CNT		0x0ce
+#define INTEL_MSIC_VCCA100ASCNT		0x0cf
+#define INTEL_MSIC_VCCA100CNT		0x0d0
+#define INTEL_MSIC_VCC180AONCNT		0x0d1
+#define INTEL_MSIC_VCC180CNT		0x0d2
+#define INTEL_MSIC_VCC330CNT		0x0d3
+#define INTEL_MSIC_VUSB330CNT		0x0d4
+#define INTEL_MSIC_VCCSDIOCNT		0x0d5
+#define INTEL_MSIC_VPROG1CNT		0x0d6
+#define INTEL_MSIC_VPROG2CNT		0x0d7
+#define INTEL_MSIC_VEMMCSCNT		0x0d8
+#define INTEL_MSIC_VEMMC1CNT		0x0d9
+#define INTEL_MSIC_VEMMC2CNT		0x0da
+#define INTEL_MSIC_VAUDACNT		0x0db
+#define INTEL_MSIC_VHSPCNT		0x0dc
+#define INTEL_MSIC_VHSNCNT		0x0dd
+#define INTEL_MSIC_VHDMICNT		0x0de
+#define INTEL_MSIC_VOTGCNT		0x0df
+#define INTEL_MSIC_V1P35CNT		0x0e0
+#define INTEL_MSIC_V330AONCNT		0x0e1
+
+/* RESET */
+#define INTEL_MSIC_CHIPCNTRL		0x100	/* WO */
+#define INTEL_MSIC_ERCONFIG		0x101
+
+/* BURST */
+#define INTEL_MSIC_BATCURRENTLIMIT12	0x102
+#define INTEL_MSIC_BATTIMELIMIT12	0x103
+#define INTEL_MSIC_BATTIMELIMIT3	0x104
+#define INTEL_MSIC_BATTIMEDB		0x105
+#define INTEL_MSIC_BRSTCONFIGOUTPUTS	0x106
+#define INTEL_MSIC_BRSTCONFIGACTIONS	0x107
+#define INTEL_MSIC_BURSTCONTROLSTATUS	0x108
+
+/* RTC */
+#define INTEL_MSIC_RTCB1		0x140	/* RO */
+#define INTEL_MSIC_RTCB2		0x141	/* RO */
+#define INTEL_MSIC_RTCB3		0x142	/* RO */
+#define INTEL_MSIC_RTCB4		0x143	/* RO */
+#define INTEL_MSIC_RTCOB1		0x144
+#define INTEL_MSIC_RTCOB2		0x145
+#define INTEL_MSIC_RTCOB3		0x146
+#define INTEL_MSIC_RTCOB4		0x147
+#define INTEL_MSIC_RTCAB1		0x148
+#define INTEL_MSIC_RTCAB2		0x149
+#define INTEL_MSIC_RTCAB3		0x14a
+#define INTEL_MSIC_RTCAB4		0x14b
+#define INTEL_MSIC_RTCWAB1		0x14c
+#define INTEL_MSIC_RTCWAB2		0x14d
+#define INTEL_MSIC_RTCWAB3		0x14e
+#define INTEL_MSIC_RTCWAB4		0x14f
+#define INTEL_MSIC_RTCSC1		0x150
+#define INTEL_MSIC_RTCSC2		0x151
+#define INTEL_MSIC_RTCSC3		0x152
+#define INTEL_MSIC_RTCSC4		0x153
+#define INTEL_MSIC_RTCSTATUS		0x154	/* RO */
+#define INTEL_MSIC_RTCCONFIG1		0x155
+#define INTEL_MSIC_RTCCONFIG2		0x156
+
+/* CHARGER */
+#define INTEL_MSIC_BDTIMER		0x180
+#define INTEL_MSIC_BATTRMV		0x181
+#define INTEL_MSIC_VBUSDET		0x182
+#define INTEL_MSIC_VBUSDET1		0x183
+#define INTEL_MSIC_ADPHVDET		0x184
+#define INTEL_MSIC_ADPLVDET		0x185
+#define INTEL_MSIC_ADPDETDBDM		0x186
+#define INTEL_MSIC_LOWBATTDET		0x187
+#define INTEL_MSIC_CHRCTRL		0x188
+#define INTEL_MSIC_CHRCVOLTAGE		0x189
+#define INTEL_MSIC_CHRCCURRENT		0x18a
+#define INTEL_MSIC_SPCHARGER		0x18b
+#define INTEL_MSIC_CHRTTIME		0x18c
+#define INTEL_MSIC_CHRCTRL1		0x18d
+#define INTEL_MSIC_PWRSRCLMT		0x18e
+#define INTEL_MSIC_CHRSTWDT		0x18f
+#define INTEL_MSIC_WDTWRITE		0x190	/* WO */
+#define INTEL_MSIC_CHRSAFELMT		0x191
+#define INTEL_MSIC_SPWRSRCINT		0x192	/* RO */
+#define INTEL_MSIC_SPWRSRCINT1		0x193	/* RO */
+#define INTEL_MSIC_CHRLEDPWM		0x194
+#define INTEL_MSIC_CHRLEDCTRL		0x195
+
+/* ADC */
+#define INTEL_MSIC_ADC1CNTL1		0x1c0
+#define INTEL_MSIC_ADC1CNTL2		0x1c1
+#define INTEL_MSIC_ADC1CNTL3		0x1c2
+#define INTEL_MSIC_ADC1OFFSETH		0x1c3	/* RO */
+#define INTEL_MSIC_ADC1OFFSETL		0x1c4	/* RO */
+#define INTEL_MSIC_ADC1ADDR0		0x1c5
+#define INTEL_MSIC_ADC1ADDR1		0x1c6
+#define INTEL_MSIC_ADC1ADDR2		0x1c7
+#define INTEL_MSIC_ADC1ADDR3		0x1c8
+#define INTEL_MSIC_ADC1ADDR4		0x1c9
+#define INTEL_MSIC_ADC1ADDR5		0x1ca
+#define INTEL_MSIC_ADC1ADDR6		0x1cb
+#define INTEL_MSIC_ADC1ADDR7		0x1cc
+#define INTEL_MSIC_ADC1ADDR8		0x1cd
+#define INTEL_MSIC_ADC1ADDR9		0x1ce
+#define INTEL_MSIC_ADC1ADDR10		0x1cf
+#define INTEL_MSIC_ADC1ADDR11		0x1d0
+#define INTEL_MSIC_ADC1ADDR12		0x1d1
+#define INTEL_MSIC_ADC1ADDR13		0x1d2
+#define INTEL_MSIC_ADC1ADDR14		0x1d3
+#define INTEL_MSIC_ADC1SNS0H		0x1d4	/* RO */
+#define INTEL_MSIC_ADC1SNS0L		0x1d5	/* RO */
+#define INTEL_MSIC_ADC1SNS1H		0x1d6	/* RO */
+#define INTEL_MSIC_ADC1SNS1L		0x1d7	/* RO */
+#define INTEL_MSIC_ADC1SNS2H		0x1d8	/* RO */
+#define INTEL_MSIC_ADC1SNS2L		0x1d9	/* RO */
+#define INTEL_MSIC_ADC1SNS3H		0x1da	/* RO */
+#define INTEL_MSIC_ADC1SNS3L		0x1db	/* RO */
+#define INTEL_MSIC_ADC1SNS4H		0x1dc	/* RO */
+#define INTEL_MSIC_ADC1SNS4L		0x1dd	/* RO */
+#define INTEL_MSIC_ADC1SNS5H		0x1de	/* RO */
+#define INTEL_MSIC_ADC1SNS5L		0x1df	/* RO */
+#define INTEL_MSIC_ADC1SNS6H		0x1e0	/* RO */
+#define INTEL_MSIC_ADC1SNS6L		0x1e1	/* RO */
+#define INTEL_MSIC_ADC1SNS7H		0x1e2	/* RO */
+#define INTEL_MSIC_ADC1SNS7L		0x1e3	/* RO */
+#define INTEL_MSIC_ADC1SNS8H		0x1e4	/* RO */
+#define INTEL_MSIC_ADC1SNS8L		0x1e5	/* RO */
+#define INTEL_MSIC_ADC1SNS9H		0x1e6	/* RO */
+#define INTEL_MSIC_ADC1SNS9L		0x1e7	/* RO */
+#define INTEL_MSIC_ADC1SNS10H		0x1e8	/* RO */
+#define INTEL_MSIC_ADC1SNS10L		0x1e9	/* RO */
+#define INTEL_MSIC_ADC1SNS11H		0x1ea	/* RO */
+#define INTEL_MSIC_ADC1SNS11L		0x1eb	/* RO */
+#define INTEL_MSIC_ADC1SNS12H		0x1ec	/* RO */
+#define INTEL_MSIC_ADC1SNS12L		0x1ed	/* RO */
+#define INTEL_MSIC_ADC1SNS13H		0x1ee	/* RO */
+#define INTEL_MSIC_ADC1SNS13L		0x1ef	/* RO */
+#define INTEL_MSIC_ADC1SNS14H		0x1f0	/* RO */
+#define INTEL_MSIC_ADC1SNS14L		0x1f1	/* RO */
+#define INTEL_MSIC_ADC1BV0H		0x1f2	/* RO */
+#define INTEL_MSIC_ADC1BV0L		0x1f3	/* RO */
+#define INTEL_MSIC_ADC1BV1H		0x1f4	/* RO */
+#define INTEL_MSIC_ADC1BV1L		0x1f5	/* RO */
+#define INTEL_MSIC_ADC1BV2H		0x1f6	/* RO */
+#define INTEL_MSIC_ADC1BV2L		0x1f7	/* RO */
+#define INTEL_MSIC_ADC1BV3H		0x1f8	/* RO */
+#define INTEL_MSIC_ADC1BV3L		0x1f9	/* RO */
+#define INTEL_MSIC_ADC1BI0H		0x1fa	/* RO */
+#define INTEL_MSIC_ADC1BI0L		0x1fb	/* RO */
+#define INTEL_MSIC_ADC1BI1H		0x1fc	/* RO */
+#define INTEL_MSIC_ADC1BI1L		0x1fd	/* RO */
+#define INTEL_MSIC_ADC1BI2H		0x1fe	/* RO */
+#define INTEL_MSIC_ADC1BI2L		0x1ff	/* RO */
+#define INTEL_MSIC_ADC1BI3H		0x200	/* RO */
+#define INTEL_MSIC_ADC1BI3L		0x201	/* RO */
+#define INTEL_MSIC_CCCNTL		0x202
+#define INTEL_MSIC_CCOFFSETH		0x203	/* RO */
+#define INTEL_MSIC_CCOFFSETL		0x204	/* RO */
+#define INTEL_MSIC_CCADCHA		0x205	/* RO */
+#define INTEL_MSIC_CCADCLA		0x206	/* RO */
+
+/* AUDIO */
+#define INTEL_MSIC_AUDPLLCTRL		0x240
+#define INTEL_MSIC_DMICBUF0123		0x241
+#define INTEL_MSIC_DMICBUF45		0x242
+#define INTEL_MSIC_DMICGPO		0x244
+#define INTEL_MSIC_DMICMUX		0x245
+#define INTEL_MSIC_DMICCLK		0x246
+#define INTEL_MSIC_MICBIAS		0x247
+#define INTEL_MSIC_ADCCONFIG		0x248
+#define INTEL_MSIC_MICAMP1		0x249
+#define INTEL_MSIC_MICAMP2		0x24a
+#define INTEL_MSIC_NOISEMUX		0x24b
+#define INTEL_MSIC_AUDIOMUX12		0x24c
+#define INTEL_MSIC_AUDIOMUX34		0x24d
+#define INTEL_MSIC_AUDIOSINC		0x24e
+#define INTEL_MSIC_AUDIOTXEN		0x24f
+#define INTEL_MSIC_HSEPRXCTRL		0x250
+#define INTEL_MSIC_IHFRXCTRL		0x251
+#define INTEL_MSIC_VOICETXVOL		0x252
+#define INTEL_MSIC_SIDETONEVOL		0x253
+#define INTEL_MSIC_MUSICSHARVOL		0x254
+#define INTEL_MSIC_VOICETXCTRL		0x255
+#define INTEL_MSIC_HSMIXER		0x256
+#define INTEL_MSIC_DACCONFIG		0x257
+#define INTEL_MSIC_SOFTMUTE		0x258
+#define INTEL_MSIC_HSLVOLCTRL		0x259
+#define INTEL_MSIC_HSRVOLCTRL		0x25a
+#define INTEL_MSIC_IHFLVOLCTRL		0x25b
+#define INTEL_MSIC_IHFRVOLCTRL		0x25c
+#define INTEL_MSIC_DRIVEREN		0x25d
+#define INTEL_MSIC_LINEOUTCTRL		0x25e
+#define INTEL_MSIC_VIB1CTRL1		0x25f
+#define INTEL_MSIC_VIB1CTRL2		0x260
+#define INTEL_MSIC_VIB1CTRL3		0x261
+#define INTEL_MSIC_VIB1SPIPCM_1		0x262
+#define INTEL_MSIC_VIB1SPIPCM_2		0x263
+#define INTEL_MSIC_VIB1CTRL5		0x264
+#define INTEL_MSIC_VIB2CTRL1		0x265
+#define INTEL_MSIC_VIB2CTRL2		0x266
+#define INTEL_MSIC_VIB2CTRL3		0x267
+#define INTEL_MSIC_VIB2SPIPCM_1		0x268
+#define INTEL_MSIC_VIB2SPIPCM_2		0x269
+#define INTEL_MSIC_VIB2CTRL5		0x26a
+#define INTEL_MSIC_BTNCTRL1		0x26b
+#define INTEL_MSIC_BTNCTRL2		0x26c
+#define INTEL_MSIC_PCM1TXSLOT01		0x26d
+#define INTEL_MSIC_PCM1TXSLOT23		0x26e
+#define INTEL_MSIC_PCM1TXSLOT45		0x26f
+#define INTEL_MSIC_PCM1RXSLOT0123	0x270
+#define INTEL_MSIC_PCM1RXSLOT045	0x271
+#define INTEL_MSIC_PCM2TXSLOT01		0x272
+#define INTEL_MSIC_PCM2TXSLOT23		0x273
+#define INTEL_MSIC_PCM2TXSLOT45		0x274
+#define INTEL_MSIC_PCM2RXSLOT01		0x275
+#define INTEL_MSIC_PCM2RXSLOT23		0x276
+#define INTEL_MSIC_PCM2RXSLOT45		0x277
+#define INTEL_MSIC_PCM1CTRL1		0x278
+#define INTEL_MSIC_PCM1CTRL2		0x279
+#define INTEL_MSIC_PCM1CTRL3		0x27a
+#define INTEL_MSIC_PCM2CTRL1		0x27b
+#define INTEL_MSIC_PCM2CTRL2		0x27c
+
+/* HDMI */
+#define INTEL_MSIC_HDMIPUEN		0x280
+#define INTEL_MSIC_HDMISTATUS		0x281	/* RO */
+
+/* Physical address of the start of the MSIC interrupt tree in SRAM */
+#define INTEL_MSIC_IRQ_PHYS_BASE	0xffff7fc0
+
+/**
+ * struct intel_msic_gpio_pdata - platform data for the MSIC GPIO driver
+ * @gpio_base: base number for the GPIOs
+ */
+struct intel_msic_gpio_pdata {
+	unsigned	gpio_base;
+};
+
+/**
+ * struct intel_msic_ocd_pdata - platform data for the MSIC OCD driver
+ * @gpio: GPIO number used for OCD interrupts
+ *
+ * The MSIC MFD driver converts @gpio into an IRQ number and passes it to
+ * the OCD driver as %IORESOURCE_IRQ.
+ */
+struct intel_msic_ocd_pdata {
+	unsigned	gpio;
+};
+
+/* MSIC embedded blocks (subdevices) */
+enum intel_msic_block {
+	INTEL_MSIC_BLOCK_TOUCH,
+	INTEL_MSIC_BLOCK_ADC,
+	INTEL_MSIC_BLOCK_BATTERY,
+	INTEL_MSIC_BLOCK_GPIO,
+	INTEL_MSIC_BLOCK_AUDIO,
+	INTEL_MSIC_BLOCK_HDMI,
+	INTEL_MSIC_BLOCK_THERMAL,
+	INTEL_MSIC_BLOCK_POWER_BTN,
+	INTEL_MSIC_BLOCK_OCD,
+
+	INTEL_MSIC_BLOCK_LAST,
+};
+
+/**
+ * struct intel_msic_platform_data - platform data for the MSIC driver
+ * @irq: array of interrupt numbers, one per device. If @irq is set to %0
+ *	 for a given block, the corresponding platform device is not
+ *	 created. For devices which don't have an interrupt, use %0xff
+ *	 (this is same as in SFI spec).
+ * @gpio: platform data for the MSIC GPIO driver
+ * @ocd: platform data for the MSIC OCD driver
+ *
+ * Once the MSIC driver is initialized, the register interface is ready to
+ * use. All the platform devices for subdevices are created after the
+ * register interface is ready so that we can guarantee its availability to
+ * the subdevice drivers.
+ *
+ * Interrupt numbers are passed to the subdevices via %IORESOURCE_IRQ
+ * resources of the created platform device.
+ */
+struct intel_msic_platform_data {
+	int				irq[INTEL_MSIC_BLOCK_LAST];
+	struct intel_msic_gpio_pdata	*gpio;
+	struct intel_msic_ocd_pdata	*ocd;
+};
+
+struct intel_msic;
+
+extern int intel_msic_reg_read(unsigned short reg, u8 *val);
+extern int intel_msic_reg_write(unsigned short reg, u8 val);
+extern int intel_msic_reg_update(unsigned short reg, u8 val, u8 mask);
+extern int intel_msic_bulk_read(unsigned short *reg, u8 *buf, size_t count);
+extern int intel_msic_bulk_write(unsigned short *reg, u8 *buf, size_t count);
+
+/*
+ * pdev_to_intel_msic - gets an MSIC instance from the platform device
+ * @pdev: platform device pointer
+ *
+ * The client drivers need to have pointer to the MSIC instance if they
+ * want to call intel_msic_irq_read(). This macro can be used for
+ * convenience to get the MSIC pointer from @pdev where needed. This is
+ * _only_ valid for devices which are managed by the MSIC.
+ */
+#define pdev_to_intel_msic(pdev)	(dev_get_drvdata(pdev->dev.parent))
+
+extern int intel_msic_irq_read(struct intel_msic *msic, unsigned short reg,
+			       u8 *val);
+
+#endif /* __LINUX_MFD_INTEL_MSIC_H__ */
diff --git a/include/linux/mfd/janz.h b/include/linux/mfd/janz.h
new file mode 100644
index 00000000..e9994c46
--- /dev/null
+++ b/include/linux/mfd/janz.h
@@ -0,0 +1,54 @@
+/*
+ * Common Definitions for Janz MODULbus devices
+ *
+ * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef JANZ_H
+#define JANZ_H
+
+struct janz_platform_data {
+	/* MODULbus Module Number */
+	unsigned int modno;
+};
+
+/* PLX bridge chip onboard registers */
+struct janz_cmodio_onboard_regs {
+	u8 unused1;
+
+	/*
+	 * Read access: interrupt status
+	 * Write access: interrupt disable
+	 */
+	u8 int_disable;
+	u8 unused2;
+
+	/*
+	 * Read access: MODULbus number (hex switch)
+	 * Write access: interrupt enable
+	 */
+	u8 int_enable;
+	u8 unused3;
+
+	/* write-only */
+	u8 reset_assert;
+	u8 unused4;
+
+	/* write-only */
+	u8 reset_deassert;
+	u8 unused5;
+
+	/* read-write access to serial EEPROM */
+	u8 eep;
+	u8 unused6;
+
+	/* write-only access to EEPROM chip select */
+	u8 enid;
+};
+
+#endif /* JANZ_H */
diff --git a/include/linux/mfd/max8925.h b/include/linux/mfd/max8925.h
new file mode 100644
index 00000000..15b2392a
--- /dev/null
+++ b/include/linux/mfd/max8925.h
@@ -0,0 +1,256 @@
+/*
+ * Maxim8925 Interface
+ *
+ * Copyright (C) 2009 Marvell International Ltd.
+ *	Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_MFD_MAX8925_H
+#define __LINUX_MFD_MAX8925_H
+
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+
+/* Unified sub device IDs for MAX8925 */
+enum {
+	MAX8925_ID_SD1,
+	MAX8925_ID_SD2,
+	MAX8925_ID_SD3,
+	MAX8925_ID_LDO1,
+	MAX8925_ID_LDO2,
+	MAX8925_ID_LDO3,
+	MAX8925_ID_LDO4,
+	MAX8925_ID_LDO5,
+	MAX8925_ID_LDO6,
+	MAX8925_ID_LDO7,
+	MAX8925_ID_LDO8,
+	MAX8925_ID_LDO9,
+	MAX8925_ID_LDO10,
+	MAX8925_ID_LDO11,
+	MAX8925_ID_LDO12,
+	MAX8925_ID_LDO13,
+	MAX8925_ID_LDO14,
+	MAX8925_ID_LDO15,
+	MAX8925_ID_LDO16,
+	MAX8925_ID_LDO17,
+	MAX8925_ID_LDO18,
+	MAX8925_ID_LDO19,
+	MAX8925_ID_LDO20,
+	MAX8925_ID_MAX,
+};
+
+enum {
+	/*
+	 * Charging current threshold trigger going from fast charge
+	 * to TOPOFF charge. From 5% to 20% of fasting charging current.
+	 */
+	MAX8925_TOPOFF_THR_5PER,
+	MAX8925_TOPOFF_THR_10PER,
+	MAX8925_TOPOFF_THR_15PER,
+	MAX8925_TOPOFF_THR_20PER,
+};
+
+enum {
+	/* Fast charging current */
+	MAX8925_FCHG_85MA,
+	MAX8925_FCHG_300MA,
+	MAX8925_FCHG_460MA,
+	MAX8925_FCHG_600MA,
+	MAX8925_FCHG_700MA,
+	MAX8925_FCHG_800MA,
+	MAX8925_FCHG_900MA,
+	MAX8925_FCHG_1000MA,
+};
+
+/* Charger registers */
+#define MAX8925_CHG_IRQ1		(0x7e)
+#define MAX8925_CHG_IRQ2		(0x7f)
+#define MAX8925_CHG_IRQ1_MASK		(0x80)
+#define MAX8925_CHG_IRQ2_MASK		(0x81)
+#define MAX8925_CHG_STATUS		(0x82)
+
+/* GPM registers */
+#define MAX8925_SYSENSEL		(0x00)
+#define MAX8925_ON_OFF_IRQ1		(0x01)
+#define MAX8925_ON_OFF_IRQ1_MASK	(0x02)
+#define MAX8925_ON_OFF_STATUS		(0x03)
+#define MAX8925_ON_OFF_IRQ2		(0x0d)
+#define MAX8925_ON_OFF_IRQ2_MASK	(0x0e)
+#define MAX8925_RESET_CNFG		(0x0f)
+
+/* Touch registers */
+#define MAX8925_TSC_IRQ			(0x00)
+#define MAX8925_TSC_IRQ_MASK		(0x01)
+#define MAX8925_TSC_CNFG1		(0x02)
+#define MAX8925_ADC_SCHED		(0x10)
+#define MAX8925_ADC_RES_END		(0x6f)
+
+#define MAX8925_NREF_OK			(1 << 4)
+
+/* RTC registers */
+#define MAX8925_ALARM0_CNTL		(0x18)
+#define MAX8925_ALARM1_CNTL		(0x19)
+#define MAX8925_RTC_IRQ			(0x1c)
+#define MAX8925_RTC_IRQ_MASK		(0x1d)
+#define MAX8925_MPL_CNTL		(0x1e)
+
+/* WLED registers */
+#define MAX8925_WLED_MODE_CNTL		(0x84)
+#define MAX8925_WLED_CNTL		(0x85)
+
+/* MAX8925 Registers */
+#define MAX8925_SDCTL1			(0x04)
+#define MAX8925_SDCTL2			(0x07)
+#define MAX8925_SDCTL3			(0x0A)
+#define MAX8925_SDV1			(0x06)
+#define MAX8925_SDV2			(0x09)
+#define MAX8925_SDV3			(0x0C)
+#define MAX8925_LDOCTL1			(0x18)
+#define MAX8925_LDOCTL2			(0x1C)
+#define MAX8925_LDOCTL3			(0x20)
+#define MAX8925_LDOCTL4			(0x24)
+#define MAX8925_LDOCTL5			(0x28)
+#define MAX8925_LDOCTL6			(0x2C)
+#define MAX8925_LDOCTL7			(0x30)
+#define MAX8925_LDOCTL8			(0x34)
+#define MAX8925_LDOCTL9			(0x38)
+#define MAX8925_LDOCTL10		(0x3C)
+#define MAX8925_LDOCTL11		(0x40)
+#define MAX8925_LDOCTL12		(0x44)
+#define MAX8925_LDOCTL13		(0x48)
+#define MAX8925_LDOCTL14		(0x4C)
+#define MAX8925_LDOCTL15		(0x50)
+#define MAX8925_LDOCTL16		(0x10)
+#define MAX8925_LDOCTL17		(0x14)
+#define MAX8925_LDOCTL18		(0x72)
+#define MAX8925_LDOCTL19		(0x5C)
+#define MAX8925_LDOCTL20		(0x9C)
+#define MAX8925_LDOVOUT1		(0x1A)
+#define MAX8925_LDOVOUT2		(0x1E)
+#define MAX8925_LDOVOUT3		(0x22)
+#define MAX8925_LDOVOUT4		(0x26)
+#define MAX8925_LDOVOUT5		(0x2A)
+#define MAX8925_LDOVOUT6		(0x2E)
+#define MAX8925_LDOVOUT7		(0x32)
+#define MAX8925_LDOVOUT8		(0x36)
+#define MAX8925_LDOVOUT9		(0x3A)
+#define MAX8925_LDOVOUT10		(0x3E)
+#define MAX8925_LDOVOUT11		(0x42)
+#define MAX8925_LDOVOUT12		(0x46)
+#define MAX8925_LDOVOUT13		(0x4A)
+#define MAX8925_LDOVOUT14		(0x4E)
+#define MAX8925_LDOVOUT15		(0x52)
+#define MAX8925_LDOVOUT16		(0x12)
+#define MAX8925_LDOVOUT17		(0x16)
+#define MAX8925_LDOVOUT18		(0x74)
+#define MAX8925_LDOVOUT19		(0x5E)
+#define MAX8925_LDOVOUT20		(0x9E)
+
+/* bit definitions */
+#define CHG_IRQ1_MASK			(0x07)
+#define CHG_IRQ2_MASK			(0xff)
+#define ON_OFF_IRQ1_MASK		(0xff)
+#define ON_OFF_IRQ2_MASK		(0x03)
+#define TSC_IRQ_MASK			(0x03)
+#define RTC_IRQ_MASK			(0x0c)
+
+#define MAX8925_MAX_REGULATOR		(23)
+
+#define MAX8925_NAME_SIZE		(32)
+
+/* IRQ definitions */
+enum {
+	MAX8925_IRQ_VCHG_DC_OVP,
+	MAX8925_IRQ_VCHG_DC_F,
+	MAX8925_IRQ_VCHG_DC_R,
+	MAX8925_IRQ_VCHG_THM_OK_R,
+	MAX8925_IRQ_VCHG_THM_OK_F,
+	MAX8925_IRQ_VCHG_SYSLOW_F,
+	MAX8925_IRQ_VCHG_SYSLOW_R,
+	MAX8925_IRQ_VCHG_RST,
+	MAX8925_IRQ_VCHG_DONE,
+	MAX8925_IRQ_VCHG_TOPOFF,
+	MAX8925_IRQ_VCHG_TMR_FAULT,
+	MAX8925_IRQ_GPM_RSTIN,
+	MAX8925_IRQ_GPM_MPL,
+	MAX8925_IRQ_GPM_SW_3SEC,
+	MAX8925_IRQ_GPM_EXTON_F,
+	MAX8925_IRQ_GPM_EXTON_R,
+	MAX8925_IRQ_GPM_SW_1SEC,
+	MAX8925_IRQ_GPM_SW_F,
+	MAX8925_IRQ_GPM_SW_R,
+	MAX8925_IRQ_GPM_SYSCKEN_F,
+	MAX8925_IRQ_GPM_SYSCKEN_R,
+	MAX8925_IRQ_RTC_ALARM1,
+	MAX8925_IRQ_RTC_ALARM0,
+	MAX8925_IRQ_TSC_STICK,
+	MAX8925_IRQ_TSC_NSTICK,
+	MAX8925_NR_IRQS,
+};
+
+struct max8925_chip {
+	struct device		*dev;
+	struct i2c_client	*i2c;
+	struct i2c_client	*adc;
+	struct i2c_client	*rtc;
+	struct mutex		io_lock;
+	struct mutex		irq_lock;
+
+	int			irq_base;
+	int			core_irq;
+	int			tsc_irq;
+
+	unsigned int            wakeup_flag;
+};
+
+struct max8925_backlight_pdata {
+	int	lxw_scl;	/* 0/1 -- 0.8Ohm/0.4Ohm */
+	int	lxw_freq;	/* 700KHz ~ 1400KHz */
+	int	dual_string;	/* 0/1 -- single/dual string */
+};
+
+struct max8925_touch_pdata {
+	unsigned int		flags;
+};
+
+struct max8925_power_pdata {
+	int		(*set_charger)(int);
+	unsigned	batt_detect:1;
+	unsigned	topoff_threshold:2;
+	unsigned	fast_charge:3;	/* charge current */
+	unsigned	no_temp_support:1; /* set if no temperature detect */
+	unsigned	no_insert_detect:1; /* set if no ac insert detect */
+	char		**supplied_to;
+	int		num_supplicants;
+};
+
+/*
+ * irq_base: stores IRQ base number of MAX8925 in platform
+ * tsc_irq: stores IRQ number of MAX8925 TSC
+ */
+struct max8925_platform_data {
+	struct max8925_backlight_pdata	*backlight;
+	struct max8925_touch_pdata	*touch;
+	struct max8925_power_pdata	*power;
+	struct regulator_init_data	*regulator[MAX8925_MAX_REGULATOR];
+
+	int		irq_base;
+	int		tsc_irq;
+};
+
+extern int max8925_reg_read(struct i2c_client *, int);
+extern int max8925_reg_write(struct i2c_client *, int, unsigned char);
+extern int max8925_bulk_read(struct i2c_client *, int, int, unsigned char *);
+extern int max8925_bulk_write(struct i2c_client *, int, int, unsigned char *);
+extern int max8925_set_bits(struct i2c_client *, int, unsigned char,
+			unsigned char);
+
+extern int max8925_device_init(struct max8925_chip *,
+				struct max8925_platform_data *);
+extern void max8925_device_exit(struct max8925_chip *);
+#endif /* __LINUX_MFD_MAX8925_H */
+
diff --git a/include/linux/mfd/max8997-private.h b/include/linux/mfd/max8997-private.h
new file mode 100644
index 00000000..3f4deb62
--- /dev/null
+++ b/include/linux/mfd/max8997-private.h
@@ -0,0 +1,363 @@
+/*
+ * max8997.h - Voltage regulator driver for the Maxim 8997
+ *
+ *  Copyright (C) 2010 Samsung Electrnoics
+ *  MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_MFD_MAX8997_PRIV_H
+#define __LINUX_MFD_MAX8997_PRIV_H
+
+#include <linux/i2c.h>
+
+#define MAX8997_REG_INVALID	(0xff)
+
+enum max8997_pmic_reg {
+	MAX8997_REG_PMIC_ID0	= 0x00,
+	MAX8997_REG_PMIC_ID1	= 0x01,
+	MAX8997_REG_INTSRC	= 0x02,
+	MAX8997_REG_INT1	= 0x03,
+	MAX8997_REG_INT2	= 0x04,
+	MAX8997_REG_INT3	= 0x05,
+	MAX8997_REG_INT4	= 0x06,
+
+	MAX8997_REG_INT1MSK	= 0x08,
+	MAX8997_REG_INT2MSK	= 0x09,
+	MAX8997_REG_INT3MSK	= 0x0a,
+	MAX8997_REG_INT4MSK	= 0x0b,
+
+	MAX8997_REG_STATUS1	= 0x0d,
+	MAX8997_REG_STATUS2	= 0x0e,
+	MAX8997_REG_STATUS3	= 0x0f,
+	MAX8997_REG_STATUS4	= 0x10,
+
+	MAX8997_REG_MAINCON1	= 0x13,
+	MAX8997_REG_MAINCON2	= 0x14,
+	MAX8997_REG_BUCKRAMP	= 0x15,
+
+	MAX8997_REG_BUCK1CTRL	= 0x18,
+	MAX8997_REG_BUCK1DVS1	= 0x19,
+	MAX8997_REG_BUCK1DVS2	= 0x1a,
+	MAX8997_REG_BUCK1DVS3	= 0x1b,
+	MAX8997_REG_BUCK1DVS4	= 0x1c,
+	MAX8997_REG_BUCK1DVS5	= 0x1d,
+	MAX8997_REG_BUCK1DVS6	= 0x1e,
+	MAX8997_REG_BUCK1DVS7	= 0x1f,
+	MAX8997_REG_BUCK1DVS8	= 0x20,
+	MAX8997_REG_BUCK2CTRL	= 0x21,
+	MAX8997_REG_BUCK2DVS1	= 0x22,
+	MAX8997_REG_BUCK2DVS2	= 0x23,
+	MAX8997_REG_BUCK2DVS3	= 0x24,
+	MAX8997_REG_BUCK2DVS4	= 0x25,
+	MAX8997_REG_BUCK2DVS5	= 0x26,
+	MAX8997_REG_BUCK2DVS6	= 0x27,
+	MAX8997_REG_BUCK2DVS7	= 0x28,
+	MAX8997_REG_BUCK2DVS8	= 0x29,
+	MAX8997_REG_BUCK3CTRL	= 0x2a,
+	MAX8997_REG_BUCK3DVS	= 0x2b,
+	MAX8997_REG_BUCK4CTRL	= 0x2c,
+	MAX8997_REG_BUCK4DVS	= 0x2d,
+	MAX8997_REG_BUCK5CTRL	= 0x2e,
+	MAX8997_REG_BUCK5DVS1	= 0x2f,
+	MAX8997_REG_BUCK5DVS2	= 0x30,
+	MAX8997_REG_BUCK5DVS3	= 0x31,
+	MAX8997_REG_BUCK5DVS4	= 0x32,
+	MAX8997_REG_BUCK5DVS5	= 0x33,
+	MAX8997_REG_BUCK5DVS6	= 0x34,
+	MAX8997_REG_BUCK5DVS7	= 0x35,
+	MAX8997_REG_BUCK5DVS8	= 0x36,
+	MAX8997_REG_BUCK6CTRL	= 0x37,
+	MAX8997_REG_BUCK6BPSKIPCTRL	= 0x38,
+	MAX8997_REG_BUCK7CTRL	= 0x39,
+	MAX8997_REG_BUCK7DVS	= 0x3a,
+	MAX8997_REG_LDO1CTRL	= 0x3b,
+	MAX8997_REG_LDO2CTRL	= 0x3c,
+	MAX8997_REG_LDO3CTRL	= 0x3d,
+	MAX8997_REG_LDO4CTRL	= 0x3e,
+	MAX8997_REG_LDO5CTRL	= 0x3f,
+	MAX8997_REG_LDO6CTRL	= 0x40,
+	MAX8997_REG_LDO7CTRL	= 0x41,
+	MAX8997_REG_LDO8CTRL	= 0x42,
+	MAX8997_REG_LDO9CTRL	= 0x43,
+	MAX8997_REG_LDO10CTRL	= 0x44,
+	MAX8997_REG_LDO11CTRL	= 0x45,
+	MAX8997_REG_LDO12CTRL	= 0x46,
+	MAX8997_REG_LDO13CTRL	= 0x47,
+	MAX8997_REG_LDO14CTRL	= 0x48,
+	MAX8997_REG_LDO15CTRL	= 0x49,
+	MAX8997_REG_LDO16CTRL	= 0x4a,
+	MAX8997_REG_LDO17CTRL	= 0x4b,
+	MAX8997_REG_LDO18CTRL	= 0x4c,
+	MAX8997_REG_LDO21CTRL	= 0x4d,
+
+	MAX8997_REG_MBCCTRL1	= 0x50,
+	MAX8997_REG_MBCCTRL2	= 0x51,
+	MAX8997_REG_MBCCTRL3	= 0x52,
+	MAX8997_REG_MBCCTRL4	= 0x53,
+	MAX8997_REG_MBCCTRL5	= 0x54,
+	MAX8997_REG_MBCCTRL6	= 0x55,
+	MAX8997_REG_OTPCGHCVS	= 0x56,
+
+	MAX8997_REG_SAFEOUTCTRL	= 0x5a,
+
+	MAX8997_REG_LBCNFG1	= 0x5e,
+	MAX8997_REG_LBCNFG2	= 0x5f,
+	MAX8997_REG_BBCCTRL	= 0x60,
+
+	MAX8997_REG_FLASH1_CUR	= 0x63, /* 0x63 ~ 0x6e for FLASH */
+	MAX8997_REG_FLASH2_CUR	= 0x64,
+	MAX8997_REG_MOVIE_CUR	= 0x65,
+	MAX8997_REG_GSMB_CUR	= 0x66,
+	MAX8997_REG_BOOST_CNTL	= 0x67,
+	MAX8997_REG_LEN_CNTL	= 0x68,
+	MAX8997_REG_FLASH_CNTL	= 0x69,
+	MAX8997_REG_WDT_CNTL	= 0x6a,
+	MAX8997_REG_MAXFLASH1	= 0x6b,
+	MAX8997_REG_MAXFLASH2	= 0x6c,
+	MAX8997_REG_FLASHSTATUS	= 0x6d,
+	MAX8997_REG_FLASHSTATUSMASK	= 0x6e,
+
+	MAX8997_REG_GPIOCNTL1	= 0x70,
+	MAX8997_REG_GPIOCNTL2	= 0x71,
+	MAX8997_REG_GPIOCNTL3	= 0x72,
+	MAX8997_REG_GPIOCNTL4	= 0x73,
+	MAX8997_REG_GPIOCNTL5	= 0x74,
+	MAX8997_REG_GPIOCNTL6	= 0x75,
+	MAX8997_REG_GPIOCNTL7	= 0x76,
+	MAX8997_REG_GPIOCNTL8	= 0x77,
+	MAX8997_REG_GPIOCNTL9	= 0x78,
+	MAX8997_REG_GPIOCNTL10	= 0x79,
+	MAX8997_REG_GPIOCNTL11	= 0x7a,
+	MAX8997_REG_GPIOCNTL12	= 0x7b,
+
+	MAX8997_REG_LDO1CONFIG	= 0x80,
+	MAX8997_REG_LDO2CONFIG	= 0x81,
+	MAX8997_REG_LDO3CONFIG	= 0x82,
+	MAX8997_REG_LDO4CONFIG	= 0x83,
+	MAX8997_REG_LDO5CONFIG	= 0x84,
+	MAX8997_REG_LDO6CONFIG	= 0x85,
+	MAX8997_REG_LDO7CONFIG	= 0x86,
+	MAX8997_REG_LDO8CONFIG	= 0x87,
+	MAX8997_REG_LDO9CONFIG	= 0x88,
+	MAX8997_REG_LDO10CONFIG	= 0x89,
+	MAX8997_REG_LDO11CONFIG	= 0x8a,
+	MAX8997_REG_LDO12CONFIG	= 0x8b,
+	MAX8997_REG_LDO13CONFIG	= 0x8c,
+	MAX8997_REG_LDO14CONFIG	= 0x8d,
+	MAX8997_REG_LDO15CONFIG	= 0x8e,
+	MAX8997_REG_LDO16CONFIG	= 0x8f,
+	MAX8997_REG_LDO17CONFIG	= 0x90,
+	MAX8997_REG_LDO18CONFIG	= 0x91,
+	MAX8997_REG_LDO21CONFIG	= 0x92,
+
+	MAX8997_REG_DVSOKTIMER1	= 0x97,
+	MAX8997_REG_DVSOKTIMER2	= 0x98,
+	MAX8997_REG_DVSOKTIMER4	= 0x99,
+	MAX8997_REG_DVSOKTIMER5	= 0x9a,
+
+	MAX8997_REG_PMIC_END	= 0x9b,
+};
+
+enum max8997_muic_reg {
+	MAX8997_MUIC_REG_ID		= 0x0,
+	MAX8997_MUIC_REG_INT1		= 0x1,
+	MAX8997_MUIC_REG_INT2		= 0x2,
+	MAX8997_MUIC_REG_INT3		= 0x3,
+	MAX8997_MUIC_REG_STATUS1	= 0x4,
+	MAX8997_MUIC_REG_STATUS2	= 0x5,
+	MAX8997_MUIC_REG_STATUS3	= 0x6,
+	MAX8997_MUIC_REG_INTMASK1	= 0x7,
+	MAX8997_MUIC_REG_INTMASK2	= 0x8,
+	MAX8997_MUIC_REG_INTMASK3	= 0x9,
+	MAX8997_MUIC_REG_CDETCTRL	= 0xa,
+
+	MAX8997_MUIC_REG_CONTROL1	= 0xc,
+	MAX8997_MUIC_REG_CONTROL2	= 0xd,
+	MAX8997_MUIC_REG_CONTROL3	= 0xe,
+
+	MAX8997_MUIC_REG_END		= 0xf,
+};
+
+enum max8997_haptic_reg {
+	MAX8997_HAPTIC_REG_GENERAL	= 0x00,
+	MAX8997_HAPTIC_REG_CONF1	= 0x01,
+	MAX8997_HAPTIC_REG_CONF2	= 0x02,
+	MAX8997_HAPTIC_REG_DRVCONF	= 0x03,
+	MAX8997_HAPTIC_REG_CYCLECONF1	= 0x04,
+	MAX8997_HAPTIC_REG_CYCLECONF2	= 0x05,
+	MAX8997_HAPTIC_REG_SIGCONF1	= 0x06,
+	MAX8997_HAPTIC_REG_SIGCONF2	= 0x07,
+	MAX8997_HAPTIC_REG_SIGCONF3	= 0x08,
+	MAX8997_HAPTIC_REG_SIGCONF4	= 0x09,
+	MAX8997_HAPTIC_REG_SIGDC1	= 0x0a,
+	MAX8997_HAPTIC_REG_SIGDC2	= 0x0b,
+	MAX8997_HAPTIC_REG_SIGPWMDC1	= 0x0c,
+	MAX8997_HAPTIC_REG_SIGPWMDC2	= 0x0d,
+	MAX8997_HAPTIC_REG_SIGPWMDC3	= 0x0e,
+	MAX8997_HAPTIC_REG_SIGPWMDC4	= 0x0f,
+	MAX8997_HAPTIC_REG_MTR_REV	= 0x10,
+
+	MAX8997_HAPTIC_REG_END		= 0x11,
+};
+
+/* slave addr = 0x0c: using "2nd part" of rev4 datasheet */
+enum max8997_rtc_reg {
+	MAX8997_RTC_CTRLMASK		= 0x02,
+	MAX8997_RTC_CTRL		= 0x03,
+	MAX8997_RTC_UPDATE1		= 0x04,
+	MAX8997_RTC_UPDATE2		= 0x05,
+	MAX8997_RTC_WTSR_SMPL		= 0x06,
+
+	MAX8997_RTC_SEC			= 0x10,
+	MAX8997_RTC_MIN			= 0x11,
+	MAX8997_RTC_HOUR		= 0x12,
+	MAX8997_RTC_DAY_OF_WEEK		= 0x13,
+	MAX8997_RTC_MONTH		= 0x14,
+	MAX8997_RTC_YEAR		= 0x15,
+	MAX8997_RTC_DAY_OF_MONTH	= 0x16,
+	MAX8997_RTC_ALARM1_SEC		= 0x17,
+	MAX8997_RTC_ALARM1_MIN		= 0x18,
+	MAX8997_RTC_ALARM1_HOUR		= 0x19,
+	MAX8997_RTC_ALARM1_DAY_OF_WEEK	= 0x1a,
+	MAX8997_RTC_ALARM1_MONTH	= 0x1b,
+	MAX8997_RTC_ALARM1_YEAR		= 0x1c,
+	MAX8997_RTC_ALARM1_DAY_OF_MONTH	= 0x1d,
+	MAX8997_RTC_ALARM2_SEC		= 0x1e,
+	MAX8997_RTC_ALARM2_MIN		= 0x1f,
+	MAX8997_RTC_ALARM2_HOUR		= 0x20,
+	MAX8997_RTC_ALARM2_DAY_OF_WEEK	= 0x21,
+	MAX8997_RTC_ALARM2_MONTH	= 0x22,
+	MAX8997_RTC_ALARM2_YEAR		= 0x23,
+	MAX8997_RTC_ALARM2_DAY_OF_MONTH	= 0x24,
+};
+
+enum max8997_irq_source {
+	PMIC_INT1 = 0,
+	PMIC_INT2,
+	PMIC_INT3,
+	PMIC_INT4,
+
+	FUEL_GAUGE, /* Ignored (MAX17042 driver handles) */
+
+	MUIC_INT1,
+	MUIC_INT2,
+	MUIC_INT3,
+
+	GPIO_LOW, /* Not implemented */
+	GPIO_HI, /* Not implemented */
+
+	FLASH_STATUS, /* Not implemented */
+
+	MAX8997_IRQ_GROUP_NR,
+};
+
+enum max8997_irq {
+	MAX8997_PMICIRQ_PWRONR,
+	MAX8997_PMICIRQ_PWRONF,
+	MAX8997_PMICIRQ_PWRON1SEC,
+	MAX8997_PMICIRQ_JIGONR,
+	MAX8997_PMICIRQ_JIGONF,
+	MAX8997_PMICIRQ_LOWBAT2,
+	MAX8997_PMICIRQ_LOWBAT1,
+
+	MAX8997_PMICIRQ_JIGR,
+	MAX8997_PMICIRQ_JIGF,
+	MAX8997_PMICIRQ_MR,
+	MAX8997_PMICIRQ_DVS1OK,
+	MAX8997_PMICIRQ_DVS2OK,
+	MAX8997_PMICIRQ_DVS3OK,
+	MAX8997_PMICIRQ_DVS4OK,
+
+	MAX8997_PMICIRQ_CHGINS,
+	MAX8997_PMICIRQ_CHGRM,
+	MAX8997_PMICIRQ_DCINOVP,
+	MAX8997_PMICIRQ_TOPOFFR,
+	MAX8997_PMICIRQ_CHGRSTF,
+	MAX8997_PMICIRQ_MBCHGTMEXPD,
+
+	MAX8997_PMICIRQ_RTC60S,
+	MAX8997_PMICIRQ_RTCA1,
+	MAX8997_PMICIRQ_RTCA2,
+	MAX8997_PMICIRQ_SMPL_INT,
+	MAX8997_PMICIRQ_RTC1S,
+	MAX8997_PMICIRQ_WTSR,
+
+	MAX8997_MUICIRQ_ADCError,
+	MAX8997_MUICIRQ_ADCLow,
+	MAX8997_MUICIRQ_ADC,
+
+	MAX8997_MUICIRQ_VBVolt,
+	MAX8997_MUICIRQ_DBChg,
+	MAX8997_MUICIRQ_DCDTmr,
+	MAX8997_MUICIRQ_ChgDetRun,
+	MAX8997_MUICIRQ_ChgTyp,
+
+	MAX8997_MUICIRQ_OVP,
+
+	MAX8997_IRQ_NR,
+};
+
+#define MAX8997_NUM_GPIO	12
+struct max8997_dev {
+	struct device *dev;
+	struct i2c_client *i2c; /* 0xcc / PMIC, Battery Control, and FLASH */
+	struct i2c_client *rtc; /* slave addr 0x0c */
+	struct i2c_client *haptic; /* slave addr 0x90 */
+	struct i2c_client *muic; /* slave addr 0x4a */
+	struct mutex iolock;
+
+	int type;
+	struct platform_device *battery; /* battery control (not fuel gauge) */
+
+	int irq;
+	int ono;
+	int irq_base;
+	struct mutex irqlock;
+	int irq_masks_cur[MAX8997_IRQ_GROUP_NR];
+	int irq_masks_cache[MAX8997_IRQ_GROUP_NR];
+
+	/* For hibernation */
+	u8 reg_dump[MAX8997_REG_PMIC_END + MAX8997_MUIC_REG_END +
+		MAX8997_HAPTIC_REG_END];
+
+	bool gpio_status[MAX8997_NUM_GPIO];
+};
+
+enum max8997_types {
+	TYPE_MAX8997,
+	TYPE_MAX8966,
+};
+
+extern int max8997_irq_init(struct max8997_dev *max8997);
+extern void max8997_irq_exit(struct max8997_dev *max8997);
+extern int max8997_irq_resume(struct max8997_dev *max8997);
+
+extern int max8997_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest);
+extern int max8997_bulk_read(struct i2c_client *i2c, u8 reg, int count,
+				u8 *buf);
+extern int max8997_write_reg(struct i2c_client *i2c, u8 reg, u8 value);
+extern int max8997_bulk_write(struct i2c_client *i2c, u8 reg, int count,
+				u8 *buf);
+extern int max8997_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask);
+
+#define MAX8997_GPIO_INT_BOTH	(0x3 << 4)
+#define MAX8997_GPIO_INT_RISE	(0x2 << 4)
+#define MAX8997_GPIO_INT_FALL	(0x1 << 4)
+
+#define MAX8997_GPIO_INT_MASK	(0x3 << 4)
+#define MAX8997_GPIO_DATA_MASK	(0x1 << 2)
+#endif /*  __LINUX_MFD_MAX8997_PRIV_H */
diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h
new file mode 100644
index 00000000..28726dd5
--- /dev/null
+++ b/include/linux/mfd/max8997.h
@@ -0,0 +1,252 @@
+/*
+ * max8997.h - Driver for the Maxim 8997/8966
+ *
+ *  Copyright (C) 2009-2010 Samsung Electrnoics
+ *  MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * This driver is based on max8998.h
+ *
+ * MAX8997 has PMIC, MUIC, HAPTIC, RTC, FLASH, and Fuel Gauge devices.
+ * Except Fuel Gauge, every device shares the same I2C bus and included in
+ * this mfd driver. Although the fuel gauge is included in the chip, it is
+ * excluded from the driver because a) it has a different I2C bus from
+ * others and b) it can be enabled simply by using MAX17042 driver.
+ */
+
+#ifndef __LINUX_MFD_MAX8998_H
+#define __LINUX_MFD_MAX8998_H
+
+#include <linux/regulator/consumer.h>
+
+/* MAX8997/8966 regulator IDs */
+enum max8998_regulators {
+	MAX8997_LDO1 = 0,
+	MAX8997_LDO2,
+	MAX8997_LDO3,
+	MAX8997_LDO4,
+	MAX8997_LDO5,
+	MAX8997_LDO6,
+	MAX8997_LDO7,
+	MAX8997_LDO8,
+	MAX8997_LDO9,
+	MAX8997_LDO10,
+	MAX8997_LDO11,
+	MAX8997_LDO12,
+	MAX8997_LDO13,
+	MAX8997_LDO14,
+	MAX8997_LDO15,
+	MAX8997_LDO16,
+	MAX8997_LDO17,
+	MAX8997_LDO18,
+	MAX8997_LDO21,
+	MAX8997_BUCK1,
+	MAX8997_BUCK2,
+	MAX8997_BUCK3,
+	MAX8997_BUCK4,
+	MAX8997_BUCK5,
+	MAX8997_BUCK6,
+	MAX8997_BUCK7,
+	MAX8997_EN32KHZ_AP,
+	MAX8997_EN32KHZ_CP,
+	MAX8997_ENVICHG,
+	MAX8997_ESAFEOUT1,
+	MAX8997_ESAFEOUT2,
+	MAX8997_CHARGER_CV, /* control MBCCV of MBCCTRL3 */
+	MAX8997_CHARGER, /* charger current, MBCCTRL4 */
+	MAX8997_CHARGER_TOPOFF, /* MBCCTRL5 */
+
+	MAX8997_REG_MAX,
+};
+
+struct max8997_regulator_data {
+	int id;
+	struct regulator_init_data *initdata;
+};
+
+enum max8997_muic_usb_type {
+	MAX8997_USB_HOST,
+	MAX8997_USB_DEVICE,
+};
+
+enum max8997_muic_charger_type {
+	MAX8997_CHARGER_TYPE_NONE = 0,
+	MAX8997_CHARGER_TYPE_USB,
+	MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT,
+	MAX8997_CHARGER_TYPE_DEDICATED_CHG,
+	MAX8997_CHARGER_TYPE_500MA,
+	MAX8997_CHARGER_TYPE_1A,
+	MAX8997_CHARGER_TYPE_DEAD_BATTERY = 7,
+};
+
+struct max8997_muic_reg_data {
+	u8 addr;
+	u8 data;
+};
+
+/**
+ * struct max8997_muic_platform_data
+ * @usb_callback: callback function for USB
+ *		  inform callee of USB type (HOST or DEVICE)
+ *		  and attached state(true or false)
+ * @charger_callback: callback function for charger
+ *		  inform callee of charger_type
+ *		  and attached state(true or false)
+ * @deskdock_callback: callback function for desk dock
+ *		  inform callee of attached state(true or false)
+ * @cardock_callback: callback function for car dock
+ *		  inform callee of attached state(true or false)
+ * @mhl_callback: callback function for MHL (Mobile High-definition Link)
+ *		  inform callee of attached state(true or false)
+ * @uart_callback: callback function for JIG UART
+ *		   inform callee of attached state(true or false)
+ * @init_data: array of max8997_muic_reg_data
+ *	       used for initializing registers of MAX8997 MUIC device
+ * @num_init_data: array size of init_data
+ */
+struct max8997_muic_platform_data {
+	void (*usb_callback)(enum max8997_muic_usb_type usb_type,
+		bool attached);
+	void (*charger_callback)(bool attached,
+		enum max8997_muic_charger_type charger_type);
+	void (*deskdock_callback) (bool attached);
+	void (*cardock_callback) (bool attached);
+	void (*mhl_callback) (bool attached);
+	void (*uart_callback) (bool attached);
+
+	struct max8997_muic_reg_data *init_data;
+	int num_init_data;
+};
+
+enum max8997_haptic_motor_type {
+	MAX8997_HAPTIC_ERM,
+	MAX8997_HAPTIC_LRA,
+};
+
+enum max8997_haptic_pulse_mode {
+	MAX8997_EXTERNAL_MODE,
+	MAX8997_INTERNAL_MODE,
+};
+
+enum max8997_haptic_pwm_divisor {
+	MAX8997_PWM_DIVISOR_32,
+	MAX8997_PWM_DIVISOR_64,
+	MAX8997_PWM_DIVISOR_128,
+	MAX8997_PWM_DIVISOR_256,
+};
+
+/**
+ * max8997_haptic_platform_data
+ * @pwm_channel_id: channel number of PWM device
+ *		    valid for MAX8997_EXTERNAL_MODE
+ * @pwm_period: period in nano second for PWM device
+ *		valid for MAX8997_EXTERNAL_MODE
+ * @type: motor type
+ * @mode: pulse mode
+ *     MAX8997_EXTERNAL_MODE: external PWM device is used to control motor
+ *     MAX8997_INTERNAL_MODE: internal pulse generator is used to control motor
+ * @pwm_divisor: divisor for external PWM device
+ * @internal_mode_pattern: internal mode pattern for internal mode
+ *     [0 - 3]: valid pattern number
+ * @pattern_cycle: the number of cycles of the waveform
+ *		   for the internal mode pattern
+ *     [0 - 15]: available cycles
+ * @pattern_signal_period: period of the waveform for the internal mode pattern
+ *     [0 - 255]: available period
+ */
+struct max8997_haptic_platform_data {
+	unsigned int pwm_channel_id;
+	unsigned int pwm_period;
+
+	enum max8997_haptic_motor_type type;
+	enum max8997_haptic_pulse_mode mode;
+	enum max8997_haptic_pwm_divisor pwm_divisor;
+
+	unsigned int internal_mode_pattern;
+	unsigned int pattern_cycle;
+	unsigned int pattern_signal_period;
+};
+
+enum max8997_led_mode {
+	MAX8997_NONE,
+	MAX8997_FLASH_MODE,
+	MAX8997_MOVIE_MODE,
+	MAX8997_FLASH_PIN_CONTROL_MODE,
+	MAX8997_MOVIE_PIN_CONTROL_MODE,
+};
+
+/**
+ *  struct max8997_led_platform_data
+ *  The number of LED devices for MAX8997 is two
+ *  @mode: LED mode for each LED device
+ *  @brightness: initial brightness for each LED device
+ *	range:
+ *	[0 - 31]: MAX8997_FLASH_MODE and MAX8997_FLASH_PIN_CONTROL_MODE
+ *	[0 - 15]: MAX8997_MOVIE_MODE and MAX8997_MOVIE_PIN_CONTROL_MODE
+ */
+struct max8997_led_platform_data {
+	enum max8997_led_mode mode[2];
+	u8 brightness[2];
+};
+
+struct max8997_platform_data {
+	/* IRQ */
+	int irq_base;
+	int ono;
+	int wakeup;
+
+	/* ---- PMIC ---- */
+	struct max8997_regulator_data *regulators;
+	int num_regulators;
+
+	/*
+	 * SET1~3 DVS GPIOs control Buck1, 2, and 5 simultaneously. Therefore,
+	 * With buckx_gpiodvs enabled, the buckx cannot be controlled
+	 * independently. To control buckx (of 1, 2, and 5) independently,
+	 * disable buckx_gpiodvs and control with BUCKxDVS1 register.
+	 *
+	 * When buckx_gpiodvs and bucky_gpiodvs are both enabled, set_voltage
+	 * on buckx will change the voltage of bucky at the same time.
+	 *
+	 */
+	bool ignore_gpiodvs_side_effect;
+	int buck125_gpios[3]; /* GPIO of [0]SET1, [1]SET2, [2]SET3 */
+	int buck125_default_idx; /* Default value of SET1, 2, 3 */
+	unsigned int buck1_voltage[8]; /* buckx_voltage in uV */
+	bool buck1_gpiodvs;
+	unsigned int buck2_voltage[8];
+	bool buck2_gpiodvs;
+	unsigned int buck5_voltage[8];
+	bool buck5_gpiodvs;
+
+	/* ---- Charger control ---- */
+	/* eoc stands for 'end of charge' */
+	int eoc_mA; /* 50 ~ 200mA by 10mA step */
+	/* charge Full Timeout */
+	int timeout; /* 0 (no timeout), 5, 6, 7 hours */
+
+	/* ---- MUIC ---- */
+	struct max8997_muic_platform_data *muic_pdata;
+
+	/* ---- HAPTIC ---- */
+	struct max8997_haptic_platform_data *haptic_pdata;
+
+	/* RTC: Not implemented */
+	/* ---- LED ---- */
+	struct max8997_led_platform_data *led_pdata;
+};
+
+#endif /* __LINUX_MFD_MAX8998_H */
diff --git a/include/linux/mfd/max8998-private.h b/include/linux/mfd/max8998-private.h
new file mode 100644
index 00000000..effa5d3b
--- /dev/null
+++ b/include/linux/mfd/max8998-private.h
@@ -0,0 +1,177 @@
+/*
+ * max8998.h - Voltage regulator driver for the Maxim 8998
+ *
+ *  Copyright (C) 2009-2010 Samsung Electrnoics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *  Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_MFD_MAX8998_PRIV_H
+#define __LINUX_MFD_MAX8998_PRIV_H
+
+#define MAX8998_NUM_IRQ_REGS	4
+
+/* MAX 8998 registers */
+enum {
+	MAX8998_REG_IRQ1,
+	MAX8998_REG_IRQ2,
+	MAX8998_REG_IRQ3,
+	MAX8998_REG_IRQ4,
+	MAX8998_REG_IRQM1,
+	MAX8998_REG_IRQM2,
+	MAX8998_REG_IRQM3,
+	MAX8998_REG_IRQM4,
+	MAX8998_REG_STATUS1,
+	MAX8998_REG_STATUS2,
+	MAX8998_REG_STATUSM1,
+	MAX8998_REG_STATUSM2,
+	MAX8998_REG_CHGR1,
+	MAX8998_REG_CHGR2,
+	MAX8998_REG_LDO_ACTIVE_DISCHARGE1,
+	MAX8998_REG_LDO_ACTIVE_DISCHARGE2,
+	MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
+	MAX8998_REG_ONOFF1,
+	MAX8998_REG_ONOFF2,
+	MAX8998_REG_ONOFF3,
+	MAX8998_REG_ONOFF4,
+	MAX8998_REG_BUCK1_VOLTAGE1,
+	MAX8998_REG_BUCK1_VOLTAGE2,
+	MAX8998_REG_BUCK1_VOLTAGE3,
+	MAX8998_REG_BUCK1_VOLTAGE4,
+	MAX8998_REG_BUCK2_VOLTAGE1,
+	MAX8998_REG_BUCK2_VOLTAGE2,
+	MAX8998_REG_BUCK3,
+	MAX8998_REG_BUCK4,
+	MAX8998_REG_LDO2_LDO3,
+	MAX8998_REG_LDO4,
+	MAX8998_REG_LDO5,
+	MAX8998_REG_LDO6,
+	MAX8998_REG_LDO7,
+	MAX8998_REG_LDO8_LDO9,
+	MAX8998_REG_LDO10_LDO11,
+	MAX8998_REG_LDO12,
+	MAX8998_REG_LDO13,
+	MAX8998_REG_LDO14,
+	MAX8998_REG_LDO15,
+	MAX8998_REG_LDO16,
+	MAX8998_REG_LDO17,
+	MAX8998_REG_BKCHR,
+	MAX8998_REG_LBCNFG1,
+	MAX8998_REG_LBCNFG2,
+};
+
+/* IRQ definitions */
+enum {
+	MAX8998_IRQ_DCINF,
+	MAX8998_IRQ_DCINR,
+	MAX8998_IRQ_JIGF,
+	MAX8998_IRQ_JIGR,
+	MAX8998_IRQ_PWRONF,
+	MAX8998_IRQ_PWRONR,
+
+	MAX8998_IRQ_WTSREVNT,
+	MAX8998_IRQ_SMPLEVNT,
+	MAX8998_IRQ_ALARM1,
+	MAX8998_IRQ_ALARM0,
+
+	MAX8998_IRQ_ONKEY1S,
+	MAX8998_IRQ_TOPOFFR,
+	MAX8998_IRQ_DCINOVPR,
+	MAX8998_IRQ_CHGRSTF,
+	MAX8998_IRQ_DONER,
+	MAX8998_IRQ_CHGFAULT,
+
+	MAX8998_IRQ_LOBAT1,
+	MAX8998_IRQ_LOBAT2,
+
+	MAX8998_IRQ_NR,
+};
+
+/* MAX8998 various variants */
+enum {
+	TYPE_MAX8998 = 0, /* Default */
+	TYPE_LP3974,	/* National version of MAX8998 */
+	TYPE_LP3979,	/* Added AVS */
+};
+
+#define MAX8998_IRQ_DCINF_MASK		(1 << 2)
+#define MAX8998_IRQ_DCINR_MASK		(1 << 3)
+#define MAX8998_IRQ_JIGF_MASK		(1 << 4)
+#define MAX8998_IRQ_JIGR_MASK		(1 << 5)
+#define MAX8998_IRQ_PWRONF_MASK		(1 << 6)
+#define MAX8998_IRQ_PWRONR_MASK		(1 << 7)
+
+#define MAX8998_IRQ_WTSREVNT_MASK	(1 << 0)
+#define MAX8998_IRQ_SMPLEVNT_MASK	(1 << 1)
+#define MAX8998_IRQ_ALARM1_MASK		(1 << 2)
+#define MAX8998_IRQ_ALARM0_MASK		(1 << 3)
+
+#define MAX8998_IRQ_ONKEY1S_MASK	(1 << 0)
+#define MAX8998_IRQ_TOPOFFR_MASK	(1 << 2)
+#define MAX8998_IRQ_DCINOVPR_MASK	(1 << 3)
+#define MAX8998_IRQ_CHGRSTF_MASK	(1 << 4)
+#define MAX8998_IRQ_DONER_MASK		(1 << 5)
+#define MAX8998_IRQ_CHGFAULT_MASK	(1 << 7)
+
+#define MAX8998_IRQ_LOBAT1_MASK		(1 << 0)
+#define MAX8998_IRQ_LOBAT2_MASK		(1 << 1)
+
+#define MAX8998_ENRAMP                  (1 << 4)
+
+/**
+ * struct max8998_dev - max8998 master device for sub-drivers
+ * @dev: master device of the chip (can be used to access platform data)
+ * @i2c: i2c client private data for regulator
+ * @rtc: i2c client private data for rtc
+ * @iolock: mutex for serializing io access
+ * @irqlock: mutex for buslock
+ * @irq_base: base IRQ number for max8998, required for IRQs
+ * @irq: generic IRQ number for max8998
+ * @ono: power onoff IRQ number for max8998
+ * @irq_masks_cur: currently active value
+ * @irq_masks_cache: cached hardware value
+ * @type: indicate which max8998 "variant" is used
+ */
+struct max8998_dev {
+	struct device *dev;
+	struct i2c_client *i2c;
+	struct i2c_client *rtc;
+	struct mutex iolock;
+	struct mutex irqlock;
+
+	int irq_base;
+	int irq;
+	int ono;
+	u8 irq_masks_cur[MAX8998_NUM_IRQ_REGS];
+	u8 irq_masks_cache[MAX8998_NUM_IRQ_REGS];
+	int type;
+	bool wakeup;
+};
+
+int max8998_irq_init(struct max8998_dev *max8998);
+void max8998_irq_exit(struct max8998_dev *max8998);
+int max8998_irq_resume(struct max8998_dev *max8998);
+
+extern int max8998_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest);
+extern int max8998_bulk_read(struct i2c_client *i2c, u8 reg, int count,
+		u8 *buf);
+extern int max8998_write_reg(struct i2c_client *i2c, u8 reg, u8 value);
+extern int max8998_bulk_write(struct i2c_client *i2c, u8 reg, int count,
+		u8 *buf);
+extern int max8998_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask);
+
+#endif /*  __LINUX_MFD_MAX8998_PRIV_H */
diff --git a/include/linux/mfd/max8998.h b/include/linux/mfd/max8998.h
new file mode 100644
index 00000000..f4f0dfa4
--- /dev/null
+++ b/include/linux/mfd/max8998.h
@@ -0,0 +1,124 @@
+/*
+ * max8998.h - Voltage regulator driver for the Maxim 8998
+ *
+ *  Copyright (C) 2009-2010 Samsung Electrnoics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *  Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_MFD_MAX8998_H
+#define __LINUX_MFD_MAX8998_H
+
+#include <linux/regulator/machine.h>
+
+/* MAX 8998 regulator ids */
+enum {
+	MAX8998_LDO2 = 2,
+	MAX8998_LDO3,
+	MAX8998_LDO4,
+	MAX8998_LDO5,
+	MAX8998_LDO6,
+	MAX8998_LDO7,
+	MAX8998_LDO8,
+	MAX8998_LDO9,
+	MAX8998_LDO10,
+	MAX8998_LDO11,
+	MAX8998_LDO12,
+	MAX8998_LDO13,
+	MAX8998_LDO14,
+	MAX8998_LDO15,
+	MAX8998_LDO16,
+	MAX8998_LDO17,
+	MAX8998_BUCK1,
+	MAX8998_BUCK2,
+	MAX8998_BUCK3,
+	MAX8998_BUCK4,
+	MAX8998_EN32KHZ_AP,
+	MAX8998_EN32KHZ_CP,
+	MAX8998_ENVICHG,
+	MAX8998_ESAFEOUT1,
+	MAX8998_ESAFEOUT2,
+};
+
+/**
+ * max8998_regulator_data - regulator data
+ * @id: regulator id
+ * @initdata: regulator init data (contraints, supplies, ...)
+ */
+struct max8998_regulator_data {
+	int				id;
+	struct regulator_init_data	*initdata;
+};
+
+/**
+ * struct max8998_board - packages regulator init data
+ * @regulators: array of defined regulators
+ * @num_regulators: number of regultors used
+ * @irq_base: base IRQ number for max8998, required for IRQs
+ * @ono: power onoff IRQ number for max8998
+ * @buck_voltage_lock: Do NOT change the values of the following six
+ *   registers set by buck?_voltage?. The voltage of BUCK1/2 cannot
+ *   be other than the preset values.
+ * @buck1_voltage1: BUCK1 DVS mode 1 voltage register
+ * @buck1_voltage2: BUCK1 DVS mode 2 voltage register
+ * @buck1_voltage3: BUCK1 DVS mode 3 voltage register
+ * @buck1_voltage4: BUCK1 DVS mode 4 voltage register
+ * @buck2_voltage1: BUCK2 DVS mode 1 voltage register
+ * @buck2_voltage2: BUCK2 DVS mode 2 voltage register
+ * @buck1_set1: BUCK1 gpio pin 1 to set output voltage
+ * @buck1_set2: BUCK1 gpio pin 2 to set output voltage
+ * @buck1_default_idx: Default for BUCK1 gpio pin 1, 2
+ * @buck2_set3: BUCK2 gpio pin to set output voltage
+ * @buck2_default_idx: Default for BUCK2 gpio pin.
+ * @wakeup: Allow to wake up from suspend
+ * @rtc_delay: LP3974 RTC chip bug that requires delay after a register
+ * write before reading it.
+ * @eoc: End of Charge Level in percent: 10% ~ 45% by 5% step
+ *   If it equals 0, leave it unchanged.
+ *   Otherwise, it is a invalid value.
+ * @restart: Restart Level in mV: 100, 150, 200, and -1 for disable.
+ *   If it equals 0, leave it unchanged.
+ *   Otherwise, it is a invalid value.
+ * @timeout: Full Timeout in hours: 5, 6, 7, and -1 for disable.
+ *   If it equals 0, leave it unchanged.
+ *   Otherwise, leave it unchanged.
+ */
+struct max8998_platform_data {
+	struct max8998_regulator_data	*regulators;
+	int				num_regulators;
+	int				irq_base;
+	int				ono;
+	bool				buck_voltage_lock;
+	int				buck1_voltage1;
+	int				buck1_voltage2;
+	int				buck1_voltage3;
+	int				buck1_voltage4;
+	int				buck2_voltage1;
+	int				buck2_voltage2;
+	int				buck1_set1;
+	int				buck1_set2;
+	int				buck1_default_idx;
+	int				buck2_set3;
+	int				buck2_default_idx;
+	bool				wakeup;
+	bool				rtc_delay;
+	int				eoc;
+	int				restart;
+	int				timeout;
+};
+
+#endif /*  __LINUX_MFD_MAX8998_H */
diff --git a/include/linux/mfd/mc13783.h b/include/linux/mfd/mc13783.h
new file mode 100644
index 00000000..a8eeda77
--- /dev/null
+++ b/include/linux/mfd/mc13783.h
@@ -0,0 +1,91 @@
+/*
+ * Copyright 2010 Yong Shen <yong.shen@linaro.org>
+ * Copyright 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#ifndef __LINUX_MFD_MC13783_H
+#define __LINUX_MFD_MC13783_H
+
+#include <linux/mfd/mc13xxx.h>
+
+#define	MC13783_REG_SW1A		0
+#define	MC13783_REG_SW1B		1
+#define	MC13783_REG_SW2A		2
+#define	MC13783_REG_SW2B		3
+#define	MC13783_REG_SW3		4
+#define	MC13783_REG_PLL		5
+#define	MC13783_REG_VAUDIO	6
+#define	MC13783_REG_VIOHI	7
+#define	MC13783_REG_VIOLO	8
+#define	MC13783_REG_VDIG	9
+#define	MC13783_REG_VGEN	10
+#define	MC13783_REG_VRFDIG	11
+#define	MC13783_REG_VRFREF	12
+#define	MC13783_REG_VRFCP	13
+#define	MC13783_REG_VSIM	14
+#define	MC13783_REG_VESIM	15
+#define	MC13783_REG_VCAM	16
+#define	MC13783_REG_VRFBG	17
+#define	MC13783_REG_VVIB	18
+#define	MC13783_REG_VRF1	19
+#define	MC13783_REG_VRF2	20
+#define	MC13783_REG_VMMC1	21
+#define	MC13783_REG_VMMC2	22
+#define	MC13783_REG_GPO1	23
+#define	MC13783_REG_GPO2	24
+#define	MC13783_REG_GPO3	25
+#define	MC13783_REG_GPO4	26
+#define	MC13783_REG_V1		27
+#define	MC13783_REG_V2		28
+#define	MC13783_REG_V3		29
+#define	MC13783_REG_V4		30
+#define	MC13783_REG_PWGT1SPI	31
+#define	MC13783_REG_PWGT2SPI	32
+
+#define MC13783_IRQ_ADCDONE	MC13XXX_IRQ_ADCDONE
+#define MC13783_IRQ_ADCBISDONE	MC13XXX_IRQ_ADCBISDONE
+#define MC13783_IRQ_TS		MC13XXX_IRQ_TS
+#define MC13783_IRQ_WHIGH	3
+#define MC13783_IRQ_WLOW	4
+#define MC13783_IRQ_CHGDET	MC13XXX_IRQ_CHGDET
+#define MC13783_IRQ_CHGOV	7
+#define MC13783_IRQ_CHGREV	MC13XXX_IRQ_CHGREV
+#define MC13783_IRQ_CHGSHORT	MC13XXX_IRQ_CHGSHORT
+#define MC13783_IRQ_CCCV	MC13XXX_IRQ_CCCV
+#define MC13783_IRQ_CHGCURR	MC13XXX_IRQ_CHGCURR
+#define MC13783_IRQ_BPON	MC13XXX_IRQ_BPON
+#define MC13783_IRQ_LOBATL	MC13XXX_IRQ_LOBATL
+#define MC13783_IRQ_LOBATH	MC13XXX_IRQ_LOBATH
+#define MC13783_IRQ_UDP		15
+#define MC13783_IRQ_USB		16
+#define MC13783_IRQ_ID		19
+#define MC13783_IRQ_SE1		21
+#define MC13783_IRQ_CKDET	22
+#define MC13783_IRQ_UDM		23
+#define MC13783_IRQ_1HZ		MC13XXX_IRQ_1HZ
+#define MC13783_IRQ_TODA	MC13XXX_IRQ_TODA
+#define MC13783_IRQ_ONOFD1	27
+#define MC13783_IRQ_ONOFD2	28
+#define MC13783_IRQ_ONOFD3	29
+#define MC13783_IRQ_SYSRST	MC13XXX_IRQ_SYSRST
+#define MC13783_IRQ_RTCRST	MC13XXX_IRQ_RTCRST
+#define MC13783_IRQ_PC		MC13XXX_IRQ_PC
+#define MC13783_IRQ_WARM	MC13XXX_IRQ_WARM
+#define MC13783_IRQ_MEMHLD	MC13XXX_IRQ_MEMHLD
+#define MC13783_IRQ_PWRRDY	35
+#define MC13783_IRQ_THWARNL	MC13XXX_IRQ_THWARNL
+#define MC13783_IRQ_THWARNH	MC13XXX_IRQ_THWARNH
+#define MC13783_IRQ_CLK		MC13XXX_IRQ_CLK
+#define MC13783_IRQ_SEMAF	39
+#define MC13783_IRQ_MC2B	41
+#define MC13783_IRQ_HSDET	42
+#define MC13783_IRQ_HSL		43
+#define MC13783_IRQ_ALSPTH	44
+#define MC13783_IRQ_AHSSHORT	45
+#define MC13783_NUM_IRQ		MC13XXX_NUM_IRQ
+
+#endif /* ifndef __LINUX_MFD_MC13783_H */
diff --git a/include/linux/mfd/mc13892.h b/include/linux/mfd/mc13892.h
new file mode 100644
index 00000000..a00f2bec
--- /dev/null
+++ b/include/linux/mfd/mc13892.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright 2010 Yong Shen <yong.shen@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#ifndef __LINUX_MFD_MC13892_H
+#define __LINUX_MFD_MC13892_H
+
+#include <linux/mfd/mc13xxx.h>
+
+#define MC13892_SW1		0
+#define MC13892_SW2		1
+#define MC13892_SW3		2
+#define MC13892_SW4		3
+#define MC13892_SWBST	4
+#define MC13892_VIOHI	5
+#define MC13892_VPLL	6
+#define MC13892_VDIG	7
+#define MC13892_VSD	8
+#define MC13892_VUSB2	9
+#define MC13892_VVIDEO	10
+#define MC13892_VAUDIO	11
+#define MC13892_VCAM	12
+#define MC13892_VGEN1	13
+#define MC13892_VGEN2	14
+#define MC13892_VGEN3	15
+#define MC13892_VUSB	16
+#define MC13892_GPO1	17
+#define MC13892_GPO2	18
+#define MC13892_GPO3	19
+#define MC13892_GPO4	20
+#define MC13892_PWGT1SPI	21
+#define MC13892_PWGT2SPI	22
+#define MC13892_VCOINCELL	23
+
+#endif
diff --git a/include/linux/mfd/mc13xxx.h b/include/linux/mfd/mc13xxx.h
new file mode 100644
index 00000000..10e038ba
--- /dev/null
+++ b/include/linux/mfd/mc13xxx.h
@@ -0,0 +1,210 @@
+/*
+ * Copyright 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#ifndef __LINUX_MFD_MC13XXX_H
+#define __LINUX_MFD_MC13XXX_H
+
+#include <linux/interrupt.h>
+
+struct mc13xxx;
+
+void mc13xxx_lock(struct mc13xxx *mc13xxx);
+void mc13xxx_unlock(struct mc13xxx *mc13xxx);
+
+int mc13xxx_reg_read(struct mc13xxx *mc13xxx, unsigned int offset, u32 *val);
+int mc13xxx_reg_write(struct mc13xxx *mc13xxx, unsigned int offset, u32 val);
+int mc13xxx_reg_rmw(struct mc13xxx *mc13xxx, unsigned int offset,
+		u32 mask, u32 val);
+
+int mc13xxx_get_flags(struct mc13xxx *mc13xxx);
+
+int mc13xxx_irq_request(struct mc13xxx *mc13xxx, int irq,
+		irq_handler_t handler, const char *name, void *dev);
+int mc13xxx_irq_request_nounmask(struct mc13xxx *mc13xxx, int irq,
+		irq_handler_t handler, const char *name, void *dev);
+int mc13xxx_irq_free(struct mc13xxx *mc13xxx, int irq, void *dev);
+
+int mc13xxx_irq_mask(struct mc13xxx *mc13xxx, int irq);
+int mc13xxx_irq_unmask(struct mc13xxx *mc13xxx, int irq);
+int mc13xxx_irq_status(struct mc13xxx *mc13xxx, int irq,
+		int *enabled, int *pending);
+int mc13xxx_irq_ack(struct mc13xxx *mc13xxx, int irq);
+
+int mc13xxx_get_flags(struct mc13xxx *mc13xxx);
+
+int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx,
+		unsigned int mode, unsigned int channel,
+		u8 ato, bool atox, unsigned int *sample);
+
+#define MC13XXX_IRQ_ADCDONE	0
+#define MC13XXX_IRQ_ADCBISDONE	1
+#define MC13XXX_IRQ_TS		2
+#define MC13XXX_IRQ_CHGDET	6
+#define MC13XXX_IRQ_CHGREV	8
+#define MC13XXX_IRQ_CHGSHORT	9
+#define MC13XXX_IRQ_CCCV	10
+#define MC13XXX_IRQ_CHGCURR	11
+#define MC13XXX_IRQ_BPON	12
+#define MC13XXX_IRQ_LOBATL	13
+#define MC13XXX_IRQ_LOBATH	14
+#define MC13XXX_IRQ_1HZ		24
+#define MC13XXX_IRQ_TODA	25
+#define MC13XXX_IRQ_SYSRST	30
+#define MC13XXX_IRQ_RTCRST	31
+#define MC13XXX_IRQ_PC		32
+#define MC13XXX_IRQ_WARM	33
+#define MC13XXX_IRQ_MEMHLD	34
+#define MC13XXX_IRQ_THWARNL	36
+#define MC13XXX_IRQ_THWARNH	37
+#define MC13XXX_IRQ_CLK		38
+
+#define MC13XXX_NUM_IRQ		46
+
+struct regulator_init_data;
+
+struct mc13xxx_regulator_init_data {
+	int id;
+	struct regulator_init_data *init_data;
+	struct device_node *node;
+};
+
+struct mc13xxx_regulator_platform_data {
+	int num_regulators;
+	struct mc13xxx_regulator_init_data *regulators;
+};
+
+struct mc13xxx_led_platform_data {
+#define MC13783_LED_MD		0
+#define MC13783_LED_AD		1
+#define MC13783_LED_KP		2
+#define MC13783_LED_R1		3
+#define MC13783_LED_G1		4
+#define MC13783_LED_B1		5
+#define MC13783_LED_R2		6
+#define MC13783_LED_G2		7
+#define MC13783_LED_B2		8
+#define MC13783_LED_R3		9
+#define MC13783_LED_G3		10
+#define MC13783_LED_B3		11
+#define MC13783_LED_MAX MC13783_LED_B3
+	int id;
+	const char *name;
+	const char *default_trigger;
+
+/* Three or two bits current selection depending on the led */
+	char max_current;
+};
+
+struct mc13xxx_leds_platform_data {
+	int num_leds;
+	struct mc13xxx_led_platform_data *led;
+
+#define MC13783_LED_TRIODE_MD	(1 << 0)
+#define MC13783_LED_TRIODE_AD	(1 << 1)
+#define MC13783_LED_TRIODE_KP	(1 << 2)
+#define MC13783_LED_BOOST_EN	(1 << 3)
+#define MC13783_LED_TC1HALF	(1 << 4)
+#define MC13783_LED_SLEWLIMTC	(1 << 5)
+#define MC13783_LED_SLEWLIMBL	(1 << 6)
+#define MC13783_LED_TRIODE_TC1	(1 << 7)
+#define MC13783_LED_TRIODE_TC2	(1 << 8)
+#define MC13783_LED_TRIODE_TC3	(1 << 9)
+	int flags;
+
+#define MC13783_LED_AB_DISABLED		0
+#define MC13783_LED_AB_MD1		1
+#define MC13783_LED_AB_MD12		2
+#define MC13783_LED_AB_MD123		3
+#define MC13783_LED_AB_MD1234		4
+#define MC13783_LED_AB_MD1234_AD1	5
+#define MC13783_LED_AB_MD1234_AD12	6
+#define MC13783_LED_AB_MD1_AD		7
+	char abmode;
+
+#define MC13783_LED_ABREF_200MV	0
+#define MC13783_LED_ABREF_400MV	1
+#define MC13783_LED_ABREF_600MV	2
+#define MC13783_LED_ABREF_800MV	3
+	char abref;
+
+#define MC13783_LED_PERIOD_10MS		0
+#define MC13783_LED_PERIOD_100MS	1
+#define MC13783_LED_PERIOD_500MS	2
+#define MC13783_LED_PERIOD_2S		3
+	char bl_period;
+	char tc1_period;
+	char tc2_period;
+	char tc3_period;
+};
+
+struct mc13xxx_buttons_platform_data {
+#define MC13783_BUTTON_DBNC_0MS		0
+#define MC13783_BUTTON_DBNC_30MS	1
+#define MC13783_BUTTON_DBNC_150MS	2
+#define MC13783_BUTTON_DBNC_750MS	3
+#define MC13783_BUTTON_ENABLE		(1 << 2)
+#define MC13783_BUTTON_POL_INVERT	(1 << 3)
+#define MC13783_BUTTON_RESET_EN		(1 << 4)
+	int b1on_flags;
+	unsigned short b1on_key;
+	int b2on_flags;
+	unsigned short b2on_key;
+	int b3on_flags;
+	unsigned short b3on_key;
+};
+
+struct mc13xxx_ts_platform_data {
+	/* Delay between Touchscreen polarization and ADC Conversion.
+	 * Given in clock ticks of a 32 kHz clock which gives a granularity of
+	 * about 30.5ms */
+	u8 ato;
+
+#define MC13783_TS_ATO_FIRST false
+#define MC13783_TS_ATO_EACH  true
+	/* Use the ATO delay only for the first conversion or for each one */
+	bool atox;
+};
+
+struct mc13xxx_platform_data {
+#define MC13XXX_USE_TOUCHSCREEN (1 << 0)
+#define MC13XXX_USE_CODEC	(1 << 1)
+#define MC13XXX_USE_ADC		(1 << 2)
+#define MC13XXX_USE_RTC		(1 << 3)
+	unsigned int flags;
+
+	struct mc13xxx_regulator_platform_data regulators;
+	struct mc13xxx_leds_platform_data *leds;
+	struct mc13xxx_buttons_platform_data *buttons;
+	struct mc13xxx_ts_platform_data touch;
+};
+
+#define MC13XXX_ADC_MODE_TS		1
+#define MC13XXX_ADC_MODE_SINGLE_CHAN	2
+#define MC13XXX_ADC_MODE_MULT_CHAN	3
+
+#define MC13XXX_ADC0		43
+#define MC13XXX_ADC0_LICELLCON		(1 << 0)
+#define MC13XXX_ADC0_CHRGICON		(1 << 1)
+#define MC13XXX_ADC0_BATICON		(1 << 2)
+#define MC13XXX_ADC0_ADREFEN		(1 << 10)
+#define MC13XXX_ADC0_TSMOD0		(1 << 12)
+#define MC13XXX_ADC0_TSMOD1		(1 << 13)
+#define MC13XXX_ADC0_TSMOD2		(1 << 14)
+#define MC13XXX_ADC0_ADINC1		(1 << 16)
+#define MC13XXX_ADC0_ADINC2		(1 << 17)
+
+#define MC13XXX_ADC0_TSMOD_MASK		(MC13XXX_ADC0_TSMOD0 | \
+					MC13XXX_ADC0_TSMOD1 | \
+					MC13XXX_ADC0_TSMOD2)
+
+#define MC13XXX_ADC0_CONFIG_MASK	(MC13XXX_ADC0_TSMOD_MASK | \
+					MC13XXX_ADC0_LICELLCON | \
+					MC13XXX_ADC0_CHRGICON | \
+					MC13XXX_ADC0_BATICON)
+
+#endif /* ifndef __LINUX_MFD_MC13XXX_H */
diff --git a/include/linux/mfd/mcp.h b/include/linux/mfd/mcp.h
new file mode 100644
index 00000000..a9e8bd15
--- /dev/null
+++ b/include/linux/mfd/mcp.h
@@ -0,0 +1,64 @@
+/*
+ *  linux/drivers/mfd/mcp.h
+ *
+ *  Copyright (C) 2001 Russell King, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+#ifndef MCP_H
+#define MCP_H
+
+struct mcp_ops;
+
+struct mcp {
+	struct module	*owner;
+	struct mcp_ops	*ops;
+	spinlock_t	lock;
+	int		use_count;
+	unsigned int	sclk_rate;
+	unsigned int	rw_timeout;
+	struct device	attached_device;
+};
+
+struct mcp_ops {
+	void		(*set_telecom_divisor)(struct mcp *, unsigned int);
+	void		(*set_audio_divisor)(struct mcp *, unsigned int);
+	void		(*reg_write)(struct mcp *, unsigned int, unsigned int);
+	unsigned int	(*reg_read)(struct mcp *, unsigned int);
+	void		(*enable)(struct mcp *);
+	void		(*disable)(struct mcp *);
+};
+
+void mcp_set_telecom_divisor(struct mcp *, unsigned int);
+void mcp_set_audio_divisor(struct mcp *, unsigned int);
+void mcp_reg_write(struct mcp *, unsigned int, unsigned int);
+unsigned int mcp_reg_read(struct mcp *, unsigned int);
+void mcp_enable(struct mcp *);
+void mcp_disable(struct mcp *);
+#define mcp_get_sclk_rate(mcp)	((mcp)->sclk_rate)
+
+struct mcp *mcp_host_alloc(struct device *, size_t);
+int mcp_host_add(struct mcp *, void *);
+void mcp_host_del(struct mcp *);
+void mcp_host_free(struct mcp *);
+
+struct mcp_driver {
+	struct device_driver drv;
+	int (*probe)(struct mcp *);
+	void (*remove)(struct mcp *);
+};
+
+int mcp_driver_register(struct mcp_driver *);
+void mcp_driver_unregister(struct mcp_driver *);
+
+#define mcp_get_drvdata(mcp)	dev_get_drvdata(&(mcp)->attached_device)
+#define mcp_set_drvdata(mcp,d)	dev_set_drvdata(&(mcp)->attached_device, d)
+
+static inline void *mcp_priv(struct mcp *mcp)
+{
+	return mcp + 1;
+}
+
+#endif
diff --git a/include/linux/mfd/pcf50633/adc.h b/include/linux/mfd/pcf50633/adc.h
new file mode 100644
index 00000000..b35e6280
--- /dev/null
+++ b/include/linux/mfd/pcf50633/adc.h
@@ -0,0 +1,73 @@
+/*
+ * adc.h  -- Driver for NXP PCF50633 ADC
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __LINUX_MFD_PCF50633_ADC_H
+#define __LINUX_MFD_PCF50633_ADC_H
+
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/platform_device.h>
+
+/* ADC Registers */
+#define PCF50633_REG_ADCC3		0x52
+#define PCF50633_REG_ADCC2		0x53
+#define PCF50633_REG_ADCC1		0x54
+#define PCF50633_REG_ADCS1		0x55
+#define PCF50633_REG_ADCS2		0x56
+#define PCF50633_REG_ADCS3		0x57
+
+#define PCF50633_ADCC1_ADCSTART		0x01
+#define PCF50633_ADCC1_RES_8BIT		0x02
+#define PCF50633_ADCC1_RES_10BIT	0x00
+#define PCF50633_ADCC1_AVERAGE_NO	0x00
+#define PCF50633_ADCC1_AVERAGE_4	0x04
+#define PCF50633_ADCC1_AVERAGE_8	0x08
+#define PCF50633_ADCC1_AVERAGE_16	0x0c
+#define PCF50633_ADCC1_MUX_BATSNS_RES	0x00
+#define PCF50633_ADCC1_MUX_BATSNS_SUBTR	0x10
+#define PCF50633_ADCC1_MUX_ADCIN2_RES	0x20
+#define PCF50633_ADCC1_MUX_ADCIN2_SUBTR	0x30
+#define PCF50633_ADCC1_MUX_BATTEMP	0x60
+#define PCF50633_ADCC1_MUX_ADCIN1	0x70
+#define PCF50633_ADCC1_AVERAGE_MASK	0x0c
+#define PCF50633_ADCC1_ADCMUX_MASK	0xf0
+
+#define PCF50633_ADCC2_RATIO_NONE	0x00
+#define PCF50633_ADCC2_RATIO_BATTEMP	0x01
+#define PCF50633_ADCC2_RATIO_ADCIN1	0x02
+#define PCF50633_ADCC2_RATIO_BOTH	0x03
+#define PCF50633_ADCC2_RATIOSETTL_100US 0x04
+
+#define PCF50633_ADCC3_ACCSW_EN		0x01
+#define PCF50633_ADCC3_NTCSW_EN		0x04
+#define PCF50633_ADCC3_RES_DIV_TWO	0x10
+#define PCF50633_ADCC3_RES_DIV_THREE	0x00
+
+#define PCF50633_ADCS3_REF_NTCSW	0x00
+#define PCF50633_ADCS3_REF_ACCSW	0x10
+#define PCF50633_ADCS3_REF_2V0		0x20
+#define PCF50633_ADCS3_REF_VISA		0x30
+#define PCF50633_ADCS3_REF_2V0_2	0x70
+#define PCF50633_ADCS3_ADCRDY		0x80
+
+#define PCF50633_ADCS3_ADCDAT1L_MASK	0x03
+#define PCF50633_ADCS3_ADCDAT2L_MASK	0x0c
+#define PCF50633_ADCS3_ADCDAT2L_SHIFT	2
+#define PCF50633_ASCS3_REF_MASK		0x70
+
+extern int
+pcf50633_adc_async_read(struct pcf50633 *pcf, int mux, int avg,
+		void (*callback)(struct pcf50633 *, void *, int),
+		void *callback_param);
+extern int
+pcf50633_adc_sync_read(struct pcf50633 *pcf, int mux, int avg);
+
+#endif /* __LINUX_PCF50633_ADC_H */
diff --git a/include/linux/mfd/pcf50633/backlight.h b/include/linux/mfd/pcf50633/backlight.h
new file mode 100644
index 00000000..83747e21
--- /dev/null
+++ b/include/linux/mfd/pcf50633/backlight.h
@@ -0,0 +1,51 @@
+/*
+ *  Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ *      PCF50633 backlight device driver
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __LINUX_MFD_PCF50633_BACKLIGHT
+#define __LINUX_MFD_PCF50633_BACKLIGHT
+
+/*
+* @default_brightness: Backlight brightness is initialized to this value
+*
+* Brightness to be used after the driver has been probed.
+* Valid range 0-63.
+*
+* @default_brightness_limit: The actual brightness is limited by this value
+*
+* Brightness limit to be used after the driver has been probed. This is useful
+* when it is not known how much power is available for the backlight during
+* probe.
+* Valid range 0-63. Can be changed later with pcf50633_bl_set_brightness_limit.
+*
+* @ramp_time: Display ramp time when changing brightness
+*
+* When changing the backlights brightness the change is not instant, instead
+* it fades smooth from one state to another. This value specifies how long
+* the fade should take. The lower the value the higher the fade time.
+* Valid range 0-255
+*/
+struct pcf50633_bl_platform_data {
+	unsigned int	default_brightness;
+	unsigned int	default_brightness_limit;
+	uint8_t		ramp_time;
+};
+
+
+struct pcf50633;
+
+int pcf50633_bl_set_brightness_limit(struct pcf50633 *pcf, unsigned int limit);
+
+#endif
+
diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h
new file mode 100644
index 00000000..a8084075
--- /dev/null
+++ b/include/linux/mfd/pcf50633/core.h
@@ -0,0 +1,238 @@
+/*
+ * core.h  -- Core driver for NXP PCF50633
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __LINUX_MFD_PCF50633_CORE_H
+#define __LINUX_MFD_PCF50633_CORE_H
+
+#include <linux/i2c.h>
+#include <linux/workqueue.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/pcf50633/backlight.h>
+
+struct pcf50633;
+struct regmap;
+
+#define PCF50633_NUM_REGULATORS	11
+
+struct pcf50633_platform_data {
+	struct regulator_init_data reg_init_data[PCF50633_NUM_REGULATORS];
+
+	char **batteries;
+	int num_batteries;
+
+	/*
+	 * Should be set accordingly to the reference resistor used, see
+	 * I_{ch(ref)} charger reference current in the pcf50633 User
+	 * Manual.
+	 */
+	int charger_reference_current_ma;
+
+	/* Callbacks */
+	void (*probe_done)(struct pcf50633 *);
+	void (*mbc_event_callback)(struct pcf50633 *, int);
+	void (*regulator_registered)(struct pcf50633 *, int);
+	void (*force_shutdown)(struct pcf50633 *);
+
+	u8 resumers[5];
+
+	struct pcf50633_bl_platform_data *backlight_data;
+};
+
+struct pcf50633_irq {
+	void (*handler) (int, void *);
+	void *data;
+};
+
+int pcf50633_register_irq(struct pcf50633 *pcf, int irq,
+			void (*handler) (int, void *), void *data);
+int pcf50633_free_irq(struct pcf50633 *pcf, int irq);
+
+int pcf50633_irq_mask(struct pcf50633 *pcf, int irq);
+int pcf50633_irq_unmask(struct pcf50633 *pcf, int irq);
+int pcf50633_irq_mask_get(struct pcf50633 *pcf, int irq);
+
+int pcf50633_read_block(struct pcf50633 *, u8 reg,
+					int nr_regs, u8 *data);
+int pcf50633_write_block(struct pcf50633 *pcf, u8 reg,
+					int nr_regs, u8 *data);
+u8 pcf50633_reg_read(struct pcf50633 *, u8 reg);
+int pcf50633_reg_write(struct pcf50633 *pcf, u8 reg, u8 val);
+
+int pcf50633_reg_set_bit_mask(struct pcf50633 *pcf, u8 reg, u8 mask, u8 val);
+int pcf50633_reg_clear_bits(struct pcf50633 *pcf, u8 reg, u8 bits);
+
+/* Interrupt registers */
+
+#define PCF50633_REG_INT1	0x02
+#define PCF50633_REG_INT2	0x03
+#define PCF50633_REG_INT3	0x04
+#define PCF50633_REG_INT4	0x05
+#define PCF50633_REG_INT5	0x06
+
+#define PCF50633_REG_INT1M	0x07
+#define PCF50633_REG_INT2M	0x08
+#define PCF50633_REG_INT3M	0x09
+#define PCF50633_REG_INT4M	0x0a
+#define PCF50633_REG_INT5M	0x0b
+
+enum {
+	/* Chip IRQs */
+	PCF50633_IRQ_ADPINS,
+	PCF50633_IRQ_ADPREM,
+	PCF50633_IRQ_USBINS,
+	PCF50633_IRQ_USBREM,
+	PCF50633_IRQ_RESERVED1,
+	PCF50633_IRQ_RESERVED2,
+	PCF50633_IRQ_ALARM,
+	PCF50633_IRQ_SECOND,
+	PCF50633_IRQ_ONKEYR,
+	PCF50633_IRQ_ONKEYF,
+	PCF50633_IRQ_EXTON1R,
+	PCF50633_IRQ_EXTON1F,
+	PCF50633_IRQ_EXTON2R,
+	PCF50633_IRQ_EXTON2F,
+	PCF50633_IRQ_EXTON3R,
+	PCF50633_IRQ_EXTON3F,
+	PCF50633_IRQ_BATFULL,
+	PCF50633_IRQ_CHGHALT,
+	PCF50633_IRQ_THLIMON,
+	PCF50633_IRQ_THLIMOFF,
+	PCF50633_IRQ_USBLIMON,
+	PCF50633_IRQ_USBLIMOFF,
+	PCF50633_IRQ_ADCRDY,
+	PCF50633_IRQ_ONKEY1S,
+	PCF50633_IRQ_LOWSYS,
+	PCF50633_IRQ_LOWBAT,
+	PCF50633_IRQ_HIGHTMP,
+	PCF50633_IRQ_AUTOPWRFAIL,
+	PCF50633_IRQ_DWN1PWRFAIL,
+	PCF50633_IRQ_DWN2PWRFAIL,
+	PCF50633_IRQ_LEDPWRFAIL,
+	PCF50633_IRQ_LEDOVP,
+	PCF50633_IRQ_LDO1PWRFAIL,
+	PCF50633_IRQ_LDO2PWRFAIL,
+	PCF50633_IRQ_LDO3PWRFAIL,
+	PCF50633_IRQ_LDO4PWRFAIL,
+	PCF50633_IRQ_LDO5PWRFAIL,
+	PCF50633_IRQ_LDO6PWRFAIL,
+	PCF50633_IRQ_HCLDOPWRFAIL,
+	PCF50633_IRQ_HCLDOOVL,
+
+	/* Always last */
+	PCF50633_NUM_IRQ,
+};
+
+struct pcf50633 {
+	struct device *dev;
+	struct regmap *regmap;
+
+	struct pcf50633_platform_data *pdata;
+	int irq;
+	struct pcf50633_irq irq_handler[PCF50633_NUM_IRQ];
+	struct work_struct irq_work;
+	struct workqueue_struct *work_queue;
+	struct mutex lock;
+
+	u8 mask_regs[5];
+
+	u8 suspend_irq_masks[5];
+	u8 resume_reason[5];
+	int is_suspended;
+
+	int onkey1s_held;
+
+	struct platform_device *rtc_pdev;
+	struct platform_device *mbc_pdev;
+	struct platform_device *adc_pdev;
+	struct platform_device *input_pdev;
+	struct platform_device *bl_pdev;
+	struct platform_device *regulator_pdev[PCF50633_NUM_REGULATORS];
+};
+
+enum pcf50633_reg_int1 {
+	PCF50633_INT1_ADPINS	= 0x01,	/* Adapter inserted */
+	PCF50633_INT1_ADPREM	= 0x02,	/* Adapter removed */
+	PCF50633_INT1_USBINS	= 0x04,	/* USB inserted */
+	PCF50633_INT1_USBREM	= 0x08,	/* USB removed */
+	/* reserved */
+	PCF50633_INT1_ALARM	= 0x40, /* RTC alarm time is reached */
+	PCF50633_INT1_SECOND	= 0x80,	/* RTC periodic second interrupt */
+};
+
+enum pcf50633_reg_int2 {
+	PCF50633_INT2_ONKEYR	= 0x01, /* ONKEY rising edge */
+	PCF50633_INT2_ONKEYF	= 0x02, /* ONKEY falling edge */
+	PCF50633_INT2_EXTON1R	= 0x04, /* EXTON1 rising edge */
+	PCF50633_INT2_EXTON1F	= 0x08, /* EXTON1 falling edge */
+	PCF50633_INT2_EXTON2R	= 0x10, /* EXTON2 rising edge */
+	PCF50633_INT2_EXTON2F	= 0x20, /* EXTON2 falling edge */
+	PCF50633_INT2_EXTON3R	= 0x40, /* EXTON3 rising edge */
+	PCF50633_INT2_EXTON3F	= 0x80, /* EXTON3 falling edge */
+};
+
+enum pcf50633_reg_int3 {
+	PCF50633_INT3_BATFULL	= 0x01, /* Battery full */
+	PCF50633_INT3_CHGHALT	= 0x02,	/* Charger halt */
+	PCF50633_INT3_THLIMON	= 0x04,
+	PCF50633_INT3_THLIMOFF	= 0x08,
+	PCF50633_INT3_USBLIMON	= 0x10,
+	PCF50633_INT3_USBLIMOFF	= 0x20,
+	PCF50633_INT3_ADCRDY	= 0x40, /* ADC result ready */
+	PCF50633_INT3_ONKEY1S	= 0x80,	/* ONKEY pressed 1 second */
+};
+
+enum pcf50633_reg_int4 {
+	PCF50633_INT4_LOWSYS		= 0x01,
+	PCF50633_INT4_LOWBAT		= 0x02,
+	PCF50633_INT4_HIGHTMP		= 0x04,
+	PCF50633_INT4_AUTOPWRFAIL	= 0x08,
+	PCF50633_INT4_DWN1PWRFAIL	= 0x10,
+	PCF50633_INT4_DWN2PWRFAIL	= 0x20,
+	PCF50633_INT4_LEDPWRFAIL	= 0x40,
+	PCF50633_INT4_LEDOVP		= 0x80,
+};
+
+enum pcf50633_reg_int5 {
+	PCF50633_INT5_LDO1PWRFAIL	= 0x01,
+	PCF50633_INT5_LDO2PWRFAIL	= 0x02,
+	PCF50633_INT5_LDO3PWRFAIL	= 0x04,
+	PCF50633_INT5_LDO4PWRFAIL	= 0x08,
+	PCF50633_INT5_LDO5PWRFAIL	= 0x10,
+	PCF50633_INT5_LDO6PWRFAIL	= 0x20,
+	PCF50633_INT5_HCLDOPWRFAIL	= 0x40,
+	PCF50633_INT5_HCLDOOVL		= 0x80,
+};
+
+/* misc. registers */
+#define PCF50633_REG_OOCSHDWN	0x0c
+
+/* LED registers */
+#define PCF50633_REG_LEDOUT 0x28
+#define PCF50633_REG_LEDENA 0x29
+#define PCF50633_REG_LEDCTL 0x2a
+#define PCF50633_REG_LEDDIM 0x2b
+
+static inline struct pcf50633 *dev_to_pcf50633(struct device *dev)
+{
+	return dev_get_drvdata(dev);
+}
+
+int pcf50633_irq_init(struct pcf50633 *pcf, int irq);
+void pcf50633_irq_free(struct pcf50633 *pcf);
+#ifdef CONFIG_PM
+int pcf50633_irq_suspend(struct pcf50633 *pcf);
+int pcf50633_irq_resume(struct pcf50633 *pcf);
+#endif
+
+#endif
diff --git a/include/linux/mfd/pcf50633/gpio.h b/include/linux/mfd/pcf50633/gpio.h
new file mode 100644
index 00000000..a42b845e
--- /dev/null
+++ b/include/linux/mfd/pcf50633/gpio.h
@@ -0,0 +1,52 @@
+/*
+ * gpio.h -- GPIO driver for NXP PCF50633
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __LINUX_MFD_PCF50633_GPIO_H
+#define __LINUX_MFD_PCF50633_GPIO_H
+
+#include <linux/mfd/pcf50633/core.h>
+
+#define PCF50633_GPIO1		1
+#define PCF50633_GPIO2		2
+#define PCF50633_GPIO3		3
+#define PCF50633_GPO		4
+
+#define PCF50633_REG_GPIO1CFG	0x14
+#define PCF50633_REG_GPIO2CFG	0x15
+#define PCF50633_REG_GPIO3CFG	0x16
+#define PCF50633_REG_GPOCFG 	0x17
+
+#define PCF50633_GPOCFG_GPOSEL_MASK	0x07
+
+enum pcf50633_reg_gpocfg {
+	PCF50633_GPOCFG_GPOSEL_0	= 0x00,
+	PCF50633_GPOCFG_GPOSEL_LED_NFET	= 0x01,
+	PCF50633_GPOCFG_GPOSEL_SYSxOK	= 0x02,
+	PCF50633_GPOCFG_GPOSEL_CLK32K	= 0x03,
+	PCF50633_GPOCFG_GPOSEL_ADAPUSB	= 0x04,
+	PCF50633_GPOCFG_GPOSEL_USBxOK	= 0x05,
+	PCF50633_GPOCFG_GPOSEL_ACTPH4	= 0x06,
+	PCF50633_GPOCFG_GPOSEL_1	= 0x07,
+	PCF50633_GPOCFG_GPOSEL_INVERSE	= 0x08,
+};
+
+int pcf50633_gpio_set(struct pcf50633 *pcf, int gpio, u8 val);
+u8 pcf50633_gpio_get(struct pcf50633 *pcf, int gpio);
+
+int pcf50633_gpio_invert_set(struct pcf50633 *, int gpio, int invert);
+int pcf50633_gpio_invert_get(struct pcf50633 *pcf, int gpio);
+
+int pcf50633_gpio_power_supply_set(struct pcf50633 *,
+					int gpio, int regulator, int on);
+#endif /* __LINUX_MFD_PCF50633_GPIO_H */
+
+
diff --git a/include/linux/mfd/pcf50633/mbc.h b/include/linux/mfd/pcf50633/mbc.h
new file mode 100644
index 00000000..df4f5fa8
--- /dev/null
+++ b/include/linux/mfd/pcf50633/mbc.h
@@ -0,0 +1,134 @@
+/*
+ * mbc.h  -- Driver for NXP PCF50633 Main Battery Charger
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __LINUX_MFD_PCF50633_MBC_H
+#define __LINUX_MFD_PCF50633_MBC_H
+
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/platform_device.h>
+
+#define PCF50633_REG_MBCC1	0x43
+#define PCF50633_REG_MBCC2	0x44
+#define PCF50633_REG_MBCC3	0x45
+#define PCF50633_REG_MBCC4	0x46
+#define PCF50633_REG_MBCC5	0x47
+#define PCF50633_REG_MBCC6	0x48
+#define PCF50633_REG_MBCC7	0x49
+#define PCF50633_REG_MBCC8	0x4a
+#define PCF50633_REG_MBCS1	0x4b
+#define PCF50633_REG_MBCS2	0x4c
+#define PCF50633_REG_MBCS3	0x4d
+
+enum pcf50633_reg_mbcc1 {
+	PCF50633_MBCC1_CHGENA		= 0x01,	/* Charger enable */
+	PCF50633_MBCC1_AUTOSTOP		= 0x02,
+	PCF50633_MBCC1_AUTORES		= 0x04, /* automatic resume */
+	PCF50633_MBCC1_RESUME		= 0x08, /* explicit resume cmd */
+	PCF50633_MBCC1_RESTART		= 0x10, /* restart charging */
+	PCF50633_MBCC1_PREWDTIME_60M	= 0x20,	/* max. precharging time */
+	PCF50633_MBCC1_WDTIME_1H	= 0x00,
+	PCF50633_MBCC1_WDTIME_2H	= 0x40,
+	PCF50633_MBCC1_WDTIME_4H	= 0x80,
+	PCF50633_MBCC1_WDTIME_6H	= 0xc0,
+};
+#define PCF50633_MBCC1_WDTIME_MASK	  0xc0
+
+enum pcf50633_reg_mbcc2 {
+	PCF50633_MBCC2_VBATCOND_2V7	= 0x00,
+	PCF50633_MBCC2_VBATCOND_2V85	= 0x01,
+	PCF50633_MBCC2_VBATCOND_3V0	= 0x02,
+	PCF50633_MBCC2_VBATCOND_3V15	= 0x03,
+	PCF50633_MBCC2_VMAX_4V		= 0x00,
+	PCF50633_MBCC2_VMAX_4V20	= 0x28,
+	PCF50633_MBCC2_VRESDEBTIME_64S	= 0x80,	/* debounce time (32/64sec) */
+};
+
+enum pcf50633_reg_mbcc7 {
+	PCF50633_MBCC7_USB_100mA	= 0x00,
+	PCF50633_MBCC7_USB_500mA	= 0x01,
+	PCF50633_MBCC7_USB_1000mA	= 0x02,
+	PCF50633_MBCC7_USB_SUSPEND	= 0x03,
+	PCF50633_MBCC7_BATTEMP_EN	= 0x04,
+	PCF50633_MBCC7_BATSYSIMAX_1A6	= 0x00,
+	PCF50633_MBCC7_BATSYSIMAX_1A8	= 0x40,
+	PCF50633_MBCC7_BATSYSIMAX_2A0	= 0x80,
+	PCF50633_MBCC7_BATSYSIMAX_2A2	= 0xc0,
+};
+#define PCF50633_MBCC7_USB_MASK 0x03
+
+enum pcf50633_reg_mbcc8 {
+	PCF50633_MBCC8_USBENASUS	= 0x10,
+};
+
+enum pcf50633_reg_mbcs1 {
+	PCF50633_MBCS1_USBPRES		= 0x01,
+	PCF50633_MBCS1_USBOK		= 0x02,
+	PCF50633_MBCS1_ADAPTPRES	= 0x04,
+	PCF50633_MBCS1_ADAPTOK		= 0x08,
+	PCF50633_MBCS1_TBAT_OK		= 0x00,
+	PCF50633_MBCS1_TBAT_ABOVE	= 0x10,
+	PCF50633_MBCS1_TBAT_BELOW	= 0x20,
+	PCF50633_MBCS1_TBAT_UNDEF	= 0x30,
+	PCF50633_MBCS1_PREWDTEXP	= 0x40,
+	PCF50633_MBCS1_WDTEXP		= 0x80,
+};
+
+enum pcf50633_reg_mbcs2_mbcmod {
+	PCF50633_MBCS2_MBC_PLAY		= 0x00,
+	PCF50633_MBCS2_MBC_USB_PRE	= 0x01,
+	PCF50633_MBCS2_MBC_USB_PRE_WAIT	= 0x02,
+	PCF50633_MBCS2_MBC_USB_FAST	= 0x03,
+	PCF50633_MBCS2_MBC_USB_FAST_WAIT = 0x04,
+	PCF50633_MBCS2_MBC_USB_SUSPEND	= 0x05,
+	PCF50633_MBCS2_MBC_ADP_PRE	= 0x06,
+	PCF50633_MBCS2_MBC_ADP_PRE_WAIT	= 0x07,
+	PCF50633_MBCS2_MBC_ADP_FAST	= 0x08,
+	PCF50633_MBCS2_MBC_ADP_FAST_WAIT = 0x09,
+	PCF50633_MBCS2_MBC_BAT_FULL	= 0x0a,
+	PCF50633_MBCS2_MBC_HALT		= 0x0b,
+};
+#define PCF50633_MBCS2_MBC_MASK		0x0f
+enum pcf50633_reg_mbcs2_chgstat {
+	PCF50633_MBCS2_CHGS_NONE	= 0x00,
+	PCF50633_MBCS2_CHGS_ADAPTER	= 0x10,
+	PCF50633_MBCS2_CHGS_USB		= 0x20,
+	PCF50633_MBCS2_CHGS_BOTH	= 0x30,
+};
+#define PCF50633_MBCS2_RESSTAT_AUTO	0x40
+
+enum pcf50633_reg_mbcs3 {
+	PCF50633_MBCS3_USBLIM_PLAY	= 0x01,
+	PCF50633_MBCS3_USBLIM_CGH	= 0x02,
+	PCF50633_MBCS3_TLIM_PLAY	= 0x04,
+	PCF50633_MBCS3_TLIM_CHG		= 0x08,
+	PCF50633_MBCS3_ILIM		= 0x10,	/* 1: Ibat > Icutoff */
+	PCF50633_MBCS3_VLIM		= 0x20,	/* 1: Vbat == Vmax */
+	PCF50633_MBCS3_VBATSTAT		= 0x40,	/* 1: Vbat > Vbatcond */
+	PCF50633_MBCS3_VRES		= 0x80, /* 1: Vbat > Vth(RES) */
+};
+
+#define PCF50633_MBCC2_VBATCOND_MASK	  0x03
+#define PCF50633_MBCC2_VMAX_MASK	  0x3c
+
+/* Charger status */
+#define PCF50633_MBC_USB_ONLINE		0x01
+#define PCF50633_MBC_USB_ACTIVE		0x02
+#define PCF50633_MBC_ADAPTER_ONLINE	0x04
+#define PCF50633_MBC_ADAPTER_ACTIVE	0x08
+
+int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma);
+
+int pcf50633_mbc_get_status(struct pcf50633 *);
+int pcf50633_mbc_get_usb_online_status(struct pcf50633 *);
+
+#endif
+
diff --git a/include/linux/mfd/pcf50633/pmic.h b/include/linux/mfd/pcf50633/pmic.h
new file mode 100644
index 00000000..2d3dbe53
--- /dev/null
+++ b/include/linux/mfd/pcf50633/pmic.h
@@ -0,0 +1,67 @@
+#ifndef __LINUX_MFD_PCF50633_PMIC_H
+#define __LINUX_MFD_PCF50633_PMIC_H
+
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/platform_device.h>
+
+#define PCF50633_REG_AUTOOUT	0x1a
+#define PCF50633_REG_AUTOENA	0x1b
+#define PCF50633_REG_AUTOCTL	0x1c
+#define PCF50633_REG_AUTOMXC	0x1d
+#define PCF50633_REG_DOWN1OUT	0x1e
+#define PCF50633_REG_DOWN1ENA	0x1f
+#define PCF50633_REG_DOWN1CTL	0x20
+#define PCF50633_REG_DOWN1MXC	0x21
+#define PCF50633_REG_DOWN2OUT	0x22
+#define PCF50633_REG_DOWN2ENA	0x23
+#define PCF50633_REG_DOWN2CTL	0x24
+#define PCF50633_REG_DOWN2MXC	0x25
+#define PCF50633_REG_MEMLDOOUT	0x26
+#define PCF50633_REG_MEMLDOENA	0x27
+#define PCF50633_REG_LDO1OUT	0x2d
+#define PCF50633_REG_LDO1ENA	0x2e
+#define PCF50633_REG_LDO2OUT	0x2f
+#define PCF50633_REG_LDO2ENA	0x30
+#define PCF50633_REG_LDO3OUT	0x31
+#define PCF50633_REG_LDO3ENA	0x32
+#define PCF50633_REG_LDO4OUT	0x33
+#define PCF50633_REG_LDO4ENA	0x34
+#define PCF50633_REG_LDO5OUT	0x35
+#define PCF50633_REG_LDO5ENA	0x36
+#define PCF50633_REG_LDO6OUT	0x37
+#define PCF50633_REG_LDO6ENA	0x38
+#define PCF50633_REG_HCLDOOUT	0x39
+#define PCF50633_REG_HCLDOENA	0x3a
+#define PCF50633_REG_HCLDOOVL	0x40
+
+enum pcf50633_regulator_enable {
+	PCF50633_REGULATOR_ON		= 0x01,
+	PCF50633_REGULATOR_ON_GPIO1	= 0x02,
+	PCF50633_REGULATOR_ON_GPIO2	= 0x04,
+	PCF50633_REGULATOR_ON_GPIO3	= 0x08,
+};
+#define PCF50633_REGULATOR_ON_MASK	0x0f
+
+enum pcf50633_regulator_phase {
+	PCF50633_REGULATOR_ACTPH1	= 0x00,
+	PCF50633_REGULATOR_ACTPH2	= 0x10,
+	PCF50633_REGULATOR_ACTPH3	= 0x20,
+	PCF50633_REGULATOR_ACTPH4	= 0x30,
+};
+#define PCF50633_REGULATOR_ACTPH_MASK	0x30
+
+enum pcf50633_regulator_id {
+	PCF50633_REGULATOR_AUTO,
+	PCF50633_REGULATOR_DOWN1,
+	PCF50633_REGULATOR_DOWN2,
+	PCF50633_REGULATOR_LDO1,
+	PCF50633_REGULATOR_LDO2,
+	PCF50633_REGULATOR_LDO3,
+	PCF50633_REGULATOR_LDO4,
+	PCF50633_REGULATOR_LDO5,
+	PCF50633_REGULATOR_LDO6,
+	PCF50633_REGULATOR_HCLDO,
+	PCF50633_REGULATOR_MEMLDO,
+};
+#endif
+
diff --git a/include/linux/mfd/pm8xxx/core.h b/include/linux/mfd/pm8xxx/core.h
new file mode 100644
index 00000000..bd2f4f64
--- /dev/null
+++ b/include/linux/mfd/pm8xxx/core.h
@@ -0,0 +1,81 @@
+/*
+ * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/*
+ * Qualcomm PMIC 8xxx driver header file
+ *
+ */
+
+#ifndef __MFD_PM8XXX_CORE_H
+#define __MFD_PM8XXX_CORE_H
+
+#include <linux/mfd/core.h>
+
+struct pm8xxx_drvdata {
+	int	(*pmic_readb) (const struct device *dev, u16 addr, u8 *val);
+	int	(*pmic_writeb) (const struct device *dev, u16 addr, u8 val);
+	int	(*pmic_read_buf) (const struct device *dev, u16 addr, u8 *buf,
+									int n);
+	int	(*pmic_write_buf) (const struct device *dev, u16 addr, u8 *buf,
+									int n);
+	int	(*pmic_read_irq_stat) (const struct device *dev, int irq);
+	void	*pm_chip_data;
+};
+
+static inline int pm8xxx_readb(const struct device *dev, u16 addr, u8 *val)
+{
+	struct pm8xxx_drvdata *dd = dev_get_drvdata(dev);
+
+	if (!dd)
+		return -EINVAL;
+	return dd->pmic_readb(dev, addr, val);
+}
+
+static inline int pm8xxx_writeb(const struct device *dev, u16 addr, u8 val)
+{
+	struct pm8xxx_drvdata *dd = dev_get_drvdata(dev);
+
+	if (!dd)
+		return -EINVAL;
+	return dd->pmic_writeb(dev, addr, val);
+}
+
+static inline int pm8xxx_read_buf(const struct device *dev, u16 addr, u8 *buf,
+									int n)
+{
+	struct pm8xxx_drvdata *dd = dev_get_drvdata(dev);
+
+	if (!dd)
+		return -EINVAL;
+	return dd->pmic_read_buf(dev, addr, buf, n);
+}
+
+static inline int pm8xxx_write_buf(const struct device *dev, u16 addr, u8 *buf,
+									int n)
+{
+	struct pm8xxx_drvdata *dd = dev_get_drvdata(dev);
+
+	if (!dd)
+		return -EINVAL;
+	return dd->pmic_write_buf(dev, addr, buf, n);
+}
+
+static inline int pm8xxx_read_irq_stat(const struct device *dev, int irq)
+{
+	struct pm8xxx_drvdata *dd = dev_get_drvdata(dev);
+
+	if (!dd)
+		return -EINVAL;
+	return dd->pmic_read_irq_stat(dev, irq);
+}
+
+#endif
diff --git a/include/linux/mfd/pm8xxx/irq.h b/include/linux/mfd/pm8xxx/irq.h
new file mode 100644
index 00000000..4b21769f
--- /dev/null
+++ b/include/linux/mfd/pm8xxx/irq.h
@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/*
+ * Qualcomm PMIC irq 8xxx driver header file
+ *
+ */
+
+#ifndef __MFD_PM8XXX_IRQ_H
+#define __MFD_PM8XXX_IRQ_H
+
+#include <linux/errno.h>
+#include <linux/err.h>
+
+struct pm8xxx_irq_core_data {
+	u32		rev;
+	int		nirqs;
+};
+
+struct pm8xxx_irq_platform_data {
+	int				irq_base;
+	struct pm8xxx_irq_core_data	irq_cdata;
+	int				devirq;
+	int				irq_trigger_flag;
+};
+
+struct pm_irq_chip;
+
+#ifdef CONFIG_MFD_PM8XXX_IRQ
+int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq);
+struct pm_irq_chip * __devinit pm8xxx_irq_init(struct device *dev,
+				const struct pm8xxx_irq_platform_data *pdata);
+int __devexit pm8xxx_irq_exit(struct pm_irq_chip *chip);
+#else
+static inline int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq)
+{
+	return -ENXIO;
+}
+static inline struct pm_irq_chip * __devinit pm8xxx_irq_init(
+				const struct device *dev,
+				const struct pm8xxx_irq_platform_data *pdata)
+{
+	return ERR_PTR(-ENXIO);
+}
+static inline int __devexit pm8xxx_irq_exit(struct pm_irq_chip *chip)
+{
+	return -ENXIO;
+}
+#endif /* CONFIG_MFD_PM8XXX_IRQ */
+#endif /* __MFD_PM8XXX_IRQ_H */
diff --git a/include/linux/mfd/pm8xxx/pm8921.h b/include/linux/mfd/pm8xxx/pm8921.h
new file mode 100644
index 00000000..00fa3de7
--- /dev/null
+++ b/include/linux/mfd/pm8xxx/pm8921.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/*
+ * Qualcomm PMIC 8921 driver header file
+ *
+ */
+
+#ifndef __MFD_PM8921_H
+#define __MFD_PM8921_H
+
+#include <linux/mfd/pm8xxx/irq.h>
+
+#define PM8921_NR_IRQS		256
+
+struct pm8921_platform_data {
+	int					irq_base;
+	struct pm8xxx_irq_platform_data		*irq_pdata;
+};
+
+#endif
diff --git a/include/linux/mfd/pm8xxx/rtc.h b/include/linux/mfd/pm8xxx/rtc.h
new file mode 100644
index 00000000..14f1983e
--- /dev/null
+++ b/include/linux/mfd/pm8xxx/rtc.h
@@ -0,0 +1,25 @@
+/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __RTC_PM8XXX_H__
+#define __RTC_PM8XXX_H__
+
+#define PM8XXX_RTC_DEV_NAME     "rtc-pm8xxx"
+/**
+ * struct pm8xxx_rtc_pdata - RTC driver platform data
+ * @rtc_write_enable: variable stating RTC write capability
+ */
+struct pm8xxx_rtc_platform_data {
+	bool rtc_write_enable;
+};
+
+#endif /* __RTC_PM8XXX_H__ */
diff --git a/include/linux/mfd/rc5t583.h b/include/linux/mfd/rc5t583.h
new file mode 100644
index 00000000..0b64b19d
--- /dev/null
+++ b/include/linux/mfd/rc5t583.h
@@ -0,0 +1,326 @@
+/*
+ * Core driver interface to access RICOH_RC5T583 power management chip.
+ *
+ * Copyright (c) 2011-2012, NVIDIA CORPORATION.  All rights reserved.
+ * Author: Laxman dewangan <ldewangan@nvidia.com>
+ *
+ * Based on code
+ *      Copyright (C) 2011 RICOH COMPANY,LTD
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef __LINUX_MFD_RC5T583_H
+#define __LINUX_MFD_RC5T583_H
+
+#include <linux/mutex.h>
+#include <linux/types.h>
+#include <linux/regmap.h>
+
+#define RC5T583_MAX_REGS		0xF8
+
+/* Maximum number of main interrupts */
+#define MAX_MAIN_INTERRUPT		5
+#define RC5T583_MAX_GPEDGE_REG		2
+#define RC5T583_MAX_INTERRUPT_MASK_REGS	9
+
+/* Interrupt enable register */
+#define RC5T583_INT_EN_SYS1	0x19
+#define RC5T583_INT_EN_SYS2	0x1D
+#define RC5T583_INT_EN_DCDC	0x41
+#define RC5T583_INT_EN_RTC	0xED
+#define RC5T583_INT_EN_ADC1	0x90
+#define RC5T583_INT_EN_ADC2	0x91
+#define RC5T583_INT_EN_ADC3	0x92
+
+/* Interrupt status registers (monitor regs in Ricoh)*/
+#define RC5T583_INTC_INTPOL	0xAD
+#define RC5T583_INTC_INTEN	0xAE
+#define RC5T583_INTC_INTMON	0xAF
+
+#define RC5T583_INT_MON_GRP	0xAF
+#define RC5T583_INT_MON_SYS1	0x1B
+#define RC5T583_INT_MON_SYS2	0x1F
+#define RC5T583_INT_MON_DCDC	0x43
+#define RC5T583_INT_MON_RTC	0xEE
+
+/* Interrupt clearing registers */
+#define RC5T583_INT_IR_SYS1	0x1A
+#define RC5T583_INT_IR_SYS2	0x1E
+#define RC5T583_INT_IR_DCDC	0x42
+#define RC5T583_INT_IR_RTC	0xEE
+#define RC5T583_INT_IR_ADCL	0x94
+#define RC5T583_INT_IR_ADCH	0x95
+#define RC5T583_INT_IR_ADCEND	0x96
+#define RC5T583_INT_IR_GPIOR	0xA9
+#define RC5T583_INT_IR_GPIOF	0xAA
+
+/* Sleep sequence registers */
+#define RC5T583_SLPSEQ1		0x21
+#define RC5T583_SLPSEQ2		0x22
+#define RC5T583_SLPSEQ3		0x23
+#define RC5T583_SLPSEQ4		0x24
+#define RC5T583_SLPSEQ5		0x25
+#define RC5T583_SLPSEQ6		0x26
+#define RC5T583_SLPSEQ7		0x27
+#define RC5T583_SLPSEQ8		0x28
+#define RC5T583_SLPSEQ9		0x29
+#define RC5T583_SLPSEQ10	0x2A
+#define RC5T583_SLPSEQ11	0x2B
+
+/* Regulator registers */
+#define RC5T583_REG_DC0CTL	0x30
+#define RC5T583_REG_DC0DAC	0x31
+#define RC5T583_REG_DC0LATCTL	0x32
+#define RC5T583_REG_SR0CTL	0x33
+
+#define RC5T583_REG_DC1CTL	0x34
+#define RC5T583_REG_DC1DAC	0x35
+#define RC5T583_REG_DC1LATCTL	0x36
+#define RC5T583_REG_SR1CTL	0x37
+
+#define RC5T583_REG_DC2CTL	0x38
+#define RC5T583_REG_DC2DAC	0x39
+#define RC5T583_REG_DC2LATCTL	0x3A
+#define RC5T583_REG_SR2CTL	0x3B
+
+#define RC5T583_REG_DC3CTL	0x3C
+#define RC5T583_REG_DC3DAC	0x3D
+#define RC5T583_REG_DC3LATCTL	0x3E
+#define RC5T583_REG_SR3CTL	0x3F
+
+
+#define RC5T583_REG_LDOEN1	0x50
+#define RC5T583_REG_LDOEN2	0x51
+#define RC5T583_REG_LDODIS1	0x52
+#define RC5T583_REG_LDODIS2	0x53
+
+#define RC5T583_REG_LDO0DAC	0x54
+#define RC5T583_REG_LDO1DAC	0x55
+#define RC5T583_REG_LDO2DAC	0x56
+#define RC5T583_REG_LDO3DAC	0x57
+#define RC5T583_REG_LDO4DAC	0x58
+#define RC5T583_REG_LDO5DAC	0x59
+#define RC5T583_REG_LDO6DAC	0x5A
+#define RC5T583_REG_LDO7DAC	0x5B
+#define RC5T583_REG_LDO8DAC	0x5C
+#define RC5T583_REG_LDO9DAC	0x5D
+
+#define RC5T583_REG_DC0DAC_DS	0x60
+#define RC5T583_REG_DC1DAC_DS	0x61
+#define RC5T583_REG_DC2DAC_DS	0x62
+#define RC5T583_REG_DC3DAC_DS	0x63
+
+#define RC5T583_REG_LDO0DAC_DS	0x64
+#define RC5T583_REG_LDO1DAC_DS	0x65
+#define RC5T583_REG_LDO2DAC_DS	0x66
+#define RC5T583_REG_LDO3DAC_DS	0x67
+#define RC5T583_REG_LDO4DAC_DS	0x68
+#define RC5T583_REG_LDO5DAC_DS	0x69
+#define RC5T583_REG_LDO6DAC_DS	0x6A
+#define RC5T583_REG_LDO7DAC_DS	0x6B
+#define RC5T583_REG_LDO8DAC_DS	0x6C
+#define RC5T583_REG_LDO9DAC_DS	0x6D
+
+/* GPIO register base address */
+#define RC5T583_GPIO_IOSEL	0xA0
+#define RC5T583_GPIO_PDEN	0xA1
+#define RC5T583_GPIO_IOOUT	0xA2
+#define RC5T583_GPIO_PGSEL	0xA3
+#define RC5T583_GPIO_GPINV	0xA4
+#define RC5T583_GPIO_GPDEB	0xA5
+#define RC5T583_GPIO_GPEDGE1	0xA6
+#define RC5T583_GPIO_GPEDGE2	0xA7
+#define RC5T583_GPIO_EN_INT	0xA8
+#define RC5T583_GPIO_MON_IOIN	0xAB
+#define RC5T583_GPIO_GPOFUNC	0xAC
+
+/* RICOH_RC5T583 IRQ definitions */
+enum {
+	RC5T583_IRQ_ONKEY,
+	RC5T583_IRQ_ACOK,
+	RC5T583_IRQ_LIDOPEN,
+	RC5T583_IRQ_PREOT,
+	RC5T583_IRQ_CLKSTP,
+	RC5T583_IRQ_ONKEY_OFF,
+	RC5T583_IRQ_WD,
+	RC5T583_IRQ_EN_PWRREQ1,
+	RC5T583_IRQ_EN_PWRREQ2,
+	RC5T583_IRQ_PRE_VINDET,
+
+	RC5T583_IRQ_DC0LIM,
+	RC5T583_IRQ_DC1LIM,
+	RC5T583_IRQ_DC2LIM,
+	RC5T583_IRQ_DC3LIM,
+
+	RC5T583_IRQ_CTC,
+	RC5T583_IRQ_YALE,
+	RC5T583_IRQ_DALE,
+	RC5T583_IRQ_WALE,
+
+	RC5T583_IRQ_AIN1L,
+	RC5T583_IRQ_AIN2L,
+	RC5T583_IRQ_AIN3L,
+	RC5T583_IRQ_VBATL,
+	RC5T583_IRQ_VIN3L,
+	RC5T583_IRQ_VIN8L,
+	RC5T583_IRQ_AIN1H,
+	RC5T583_IRQ_AIN2H,
+	RC5T583_IRQ_AIN3H,
+	RC5T583_IRQ_VBATH,
+	RC5T583_IRQ_VIN3H,
+	RC5T583_IRQ_VIN8H,
+	RC5T583_IRQ_ADCEND,
+
+	RC5T583_IRQ_GPIO0,
+	RC5T583_IRQ_GPIO1,
+	RC5T583_IRQ_GPIO2,
+	RC5T583_IRQ_GPIO3,
+	RC5T583_IRQ_GPIO4,
+	RC5T583_IRQ_GPIO5,
+	RC5T583_IRQ_GPIO6,
+	RC5T583_IRQ_GPIO7,
+
+	/* Should be last entry */
+	RC5T583_MAX_IRQS,
+};
+
+/* Ricoh583 gpio definitions */
+enum {
+	RC5T583_GPIO0,
+	RC5T583_GPIO1,
+	RC5T583_GPIO2,
+	RC5T583_GPIO3,
+	RC5T583_GPIO4,
+	RC5T583_GPIO5,
+	RC5T583_GPIO6,
+	RC5T583_GPIO7,
+
+	/* Should be last entry */
+	RC5T583_MAX_GPIO,
+};
+
+enum {
+	RC5T583_DS_NONE,
+	RC5T583_DS_DC0,
+	RC5T583_DS_DC1,
+	RC5T583_DS_DC2,
+	RC5T583_DS_DC3,
+	RC5T583_DS_LDO0,
+	RC5T583_DS_LDO1,
+	RC5T583_DS_LDO2,
+	RC5T583_DS_LDO3,
+	RC5T583_DS_LDO4,
+	RC5T583_DS_LDO5,
+	RC5T583_DS_LDO6,
+	RC5T583_DS_LDO7,
+	RC5T583_DS_LDO8,
+	RC5T583_DS_LDO9,
+	RC5T583_DS_PSO0,
+	RC5T583_DS_PSO1,
+	RC5T583_DS_PSO2,
+	RC5T583_DS_PSO3,
+	RC5T583_DS_PSO4,
+	RC5T583_DS_PSO5,
+	RC5T583_DS_PSO6,
+	RC5T583_DS_PSO7,
+
+	/* Should be last entry */
+	RC5T583_DS_MAX,
+};
+
+/*
+ * Ricoh pmic RC5T583 supports sleep through two external controls.
+ * The output of gpios and regulator can be enable/disable through
+ * this external signals.
+ */
+enum {
+	RC5T583_EXT_PWRREQ1_CONTROL = 0x1,
+	RC5T583_EXT_PWRREQ2_CONTROL = 0x2,
+};
+
+struct rc5t583 {
+	struct device	*dev;
+	struct regmap	*regmap;
+	int		chip_irq;
+	int		irq_base;
+	struct mutex	irq_lock;
+	unsigned long	group_irq_en[MAX_MAIN_INTERRUPT];
+
+	/* For main interrupt bits in INTC */
+	uint8_t		intc_inten_reg;
+
+	/* For group interrupt bits and address */
+	uint8_t		irq_en_reg[RC5T583_MAX_INTERRUPT_MASK_REGS];
+
+	/* For gpio edge */
+	uint8_t		gpedge_reg[RC5T583_MAX_GPEDGE_REG];
+};
+
+/*
+ * rc5t583_platform_data: Platform data for ricoh rc5t583 pmu.
+ * The board specific data is provided through this structure.
+ * @irq_base: Irq base number on which this device registers their interrupts.
+ * @enable_shutdown: Enable shutdown through the input pin "shutdown".
+ */
+
+struct rc5t583_platform_data {
+	int		irq_base;
+	bool		enable_shutdown;
+};
+
+static inline int rc5t583_write(struct device *dev, uint8_t reg, uint8_t val)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+	return regmap_write(rc5t583->regmap, reg, val);
+}
+
+static inline int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+	unsigned int ival;
+	int ret;
+	ret = regmap_read(rc5t583->regmap, reg, &ival);
+	if (!ret)
+		*val = (uint8_t)ival;
+	return ret;
+}
+
+static inline int rc5t583_set_bits(struct device *dev, unsigned int reg,
+			unsigned int bit_mask)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+	return regmap_update_bits(rc5t583->regmap, reg, bit_mask, bit_mask);
+}
+
+static inline int rc5t583_clear_bits(struct device *dev, unsigned int reg,
+			unsigned int bit_mask)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+	return regmap_update_bits(rc5t583->regmap, reg, bit_mask, 0);
+}
+
+static inline int rc5t583_update(struct device *dev, unsigned int reg,
+		unsigned int val, unsigned int mask)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+	return regmap_update_bits(rc5t583->regmap, reg, mask, val);
+}
+
+int rc5t583_ext_power_req_config(struct device *dev, int deepsleep_id,
+	int ext_pwr_req, int deepsleep_slot_nr);
+int rc5t583_irq_init(struct rc5t583 *rc5t583, int irq, int irq_base);
+int rc5t583_irq_exit(struct rc5t583 *rc5t583);
+
+#endif
diff --git a/include/linux/mfd/rdc321x.h b/include/linux/mfd/rdc321x.h
new file mode 100644
index 00000000..4bdf19c8
--- /dev/null
+++ b/include/linux/mfd/rdc321x.h
@@ -0,0 +1,26 @@
+#ifndef __RDC321X_MFD_H
+#define __RDC321X_MFD_H
+
+#include <linux/types.h>
+#include <linux/pci.h>
+
+/* Offsets to be accessed in the southbridge PCI
+ * device configuration register */
+#define RDC321X_WDT_CTRL	0x44
+#define RDC321X_GPIO_CTRL_REG1	0x48
+#define RDC321X_GPIO_DATA_REG1	0x4c
+#define RDC321X_GPIO_CTRL_REG2	0x84
+#define RDC321X_GPIO_DATA_REG2	0x88
+
+#define RDC321X_MAX_GPIO	58
+
+struct rdc321x_gpio_pdata {
+	struct pci_dev *sb_pdev;
+	unsigned max_gpios;
+};
+
+struct rdc321x_wdt_pdata {
+	struct pci_dev *sb_pdev;
+};
+
+#endif /* __RDC321X_MFD_H */
diff --git a/include/linux/mfd/s5m87xx/s5m-core.h b/include/linux/mfd/s5m87xx/s5m-core.h
new file mode 100644
index 00000000..a7480b57
--- /dev/null
+++ b/include/linux/mfd/s5m87xx/s5m-core.h
@@ -0,0 +1,373 @@
+/*
+ * s5m-core.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd
+ *              http://www.samsung.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __LINUX_MFD_S5M_CORE_H
+#define __LINUX_MFD_S5M_CORE_H
+
+#define NUM_IRQ_REGS	4
+
+enum s5m_device_type {
+	S5M8751X,
+	S5M8763X,
+	S5M8767X,
+};
+
+/* S5M8767 registers */
+enum s5m8767_reg {
+	S5M8767_REG_ID,
+	S5M8767_REG_INT1,
+	S5M8767_REG_INT2,
+	S5M8767_REG_INT3,
+	S5M8767_REG_INT1M,
+	S5M8767_REG_INT2M,
+	S5M8767_REG_INT3M,
+	S5M8767_REG_STATUS1,
+	S5M8767_REG_STATUS2,
+	S5M8767_REG_STATUS3,
+	S5M8767_REG_CTRL1,
+	S5M8767_REG_CTRL2,
+	S5M8767_REG_LOWBAT1,
+	S5M8767_REG_LOWBAT2,
+	S5M8767_REG_BUCHG,
+	S5M8767_REG_DVSRAMP,
+	S5M8767_REG_DVSTIMER2 = 0x10,
+	S5M8767_REG_DVSTIMER3,
+	S5M8767_REG_DVSTIMER4,
+	S5M8767_REG_LDO1,
+	S5M8767_REG_LDO2,
+	S5M8767_REG_LDO3,
+	S5M8767_REG_LDO4,
+	S5M8767_REG_LDO5,
+	S5M8767_REG_LDO6,
+	S5M8767_REG_LDO7,
+	S5M8767_REG_LDO8,
+	S5M8767_REG_LDO9,
+	S5M8767_REG_LDO10,
+	S5M8767_REG_LDO11,
+	S5M8767_REG_LDO12,
+	S5M8767_REG_LDO13,
+	S5M8767_REG_LDO14 = 0x20,
+	S5M8767_REG_LDO15,
+	S5M8767_REG_LDO16,
+	S5M8767_REG_LDO17,
+	S5M8767_REG_LDO18,
+	S5M8767_REG_LDO19,
+	S5M8767_REG_LDO20,
+	S5M8767_REG_LDO21,
+	S5M8767_REG_LDO22,
+	S5M8767_REG_LDO23,
+	S5M8767_REG_LDO24,
+	S5M8767_REG_LDO25,
+	S5M8767_REG_LDO26,
+	S5M8767_REG_LDO27,
+	S5M8767_REG_LDO28,
+	S5M8767_REG_UVLO = 0x31,
+	S5M8767_REG_BUCK1CTRL1,
+	S5M8767_REG_BUCK1CTRL2,
+	S5M8767_REG_BUCK2CTRL,
+	S5M8767_REG_BUCK2DVS1,
+	S5M8767_REG_BUCK2DVS2,
+	S5M8767_REG_BUCK2DVS3,
+	S5M8767_REG_BUCK2DVS4,
+	S5M8767_REG_BUCK2DVS5,
+	S5M8767_REG_BUCK2DVS6,
+	S5M8767_REG_BUCK2DVS7,
+	S5M8767_REG_BUCK2DVS8,
+	S5M8767_REG_BUCK3CTRL,
+	S5M8767_REG_BUCK3DVS1,
+	S5M8767_REG_BUCK3DVS2,
+	S5M8767_REG_BUCK3DVS3,
+	S5M8767_REG_BUCK3DVS4,
+	S5M8767_REG_BUCK3DVS5,
+	S5M8767_REG_BUCK3DVS6,
+	S5M8767_REG_BUCK3DVS7,
+	S5M8767_REG_BUCK3DVS8,
+	S5M8767_REG_BUCK4CTRL,
+	S5M8767_REG_BUCK4DVS1,
+	S5M8767_REG_BUCK4DVS2,
+	S5M8767_REG_BUCK4DVS3,
+	S5M8767_REG_BUCK4DVS4,
+	S5M8767_REG_BUCK4DVS5,
+	S5M8767_REG_BUCK4DVS6,
+	S5M8767_REG_BUCK4DVS7,
+	S5M8767_REG_BUCK4DVS8,
+	S5M8767_REG_BUCK5CTRL1,
+	S5M8767_REG_BUCK5CTRL2,
+	S5M8767_REG_BUCK5CTRL3,
+	S5M8767_REG_BUCK5CTRL4,
+	S5M8767_REG_BUCK5CTRL5,
+	S5M8767_REG_BUCK6CTRL1,
+	S5M8767_REG_BUCK6CTRL2,
+	S5M8767_REG_BUCK7CTRL1,
+	S5M8767_REG_BUCK7CTRL2,
+	S5M8767_REG_BUCK8CTRL1,
+	S5M8767_REG_BUCK8CTRL2,
+	S5M8767_REG_BUCK9CTRL1,
+	S5M8767_REG_BUCK9CTRL2,
+	S5M8767_REG_LDO1CTRL,
+	S5M8767_REG_LDO2_1CTRL,
+	S5M8767_REG_LDO2_2CTRL,
+	S5M8767_REG_LDO2_3CTRL,
+	S5M8767_REG_LDO2_4CTRL,
+	S5M8767_REG_LDO3CTRL,
+	S5M8767_REG_LDO4CTRL,
+	S5M8767_REG_LDO5CTRL,
+	S5M8767_REG_LDO6CTRL,
+	S5M8767_REG_LDO7CTRL,
+	S5M8767_REG_LDO8CTRL,
+	S5M8767_REG_LDO9CTRL,
+	S5M8767_REG_LDO10CTRL,
+	S5M8767_REG_LDO11CTRL,
+	S5M8767_REG_LDO12CTRL,
+	S5M8767_REG_LDO13CTRL,
+	S5M8767_REG_LDO14CTRL,
+	S5M8767_REG_LDO15CTRL,
+	S5M8767_REG_LDO16CTRL,
+	S5M8767_REG_LDO17CTRL,
+	S5M8767_REG_LDO18CTRL,
+	S5M8767_REG_LDO19CTRL,
+	S5M8767_REG_LDO20CTRL,
+	S5M8767_REG_LDO21CTRL,
+	S5M8767_REG_LDO22CTRL,
+	S5M8767_REG_LDO23CTRL,
+	S5M8767_REG_LDO24CTRL,
+	S5M8767_REG_LDO25CTRL,
+	S5M8767_REG_LDO26CTRL,
+	S5M8767_REG_LDO27CTRL,
+	S5M8767_REG_LDO28CTRL,
+};
+
+/* S5M8763 registers */
+enum s5m8763_reg {
+	S5M8763_REG_IRQ1,
+	S5M8763_REG_IRQ2,
+	S5M8763_REG_IRQ3,
+	S5M8763_REG_IRQ4,
+	S5M8763_REG_IRQM1,
+	S5M8763_REG_IRQM2,
+	S5M8763_REG_IRQM3,
+	S5M8763_REG_IRQM4,
+	S5M8763_REG_STATUS1,
+	S5M8763_REG_STATUS2,
+	S5M8763_REG_STATUSM1,
+	S5M8763_REG_STATUSM2,
+	S5M8763_REG_CHGR1,
+	S5M8763_REG_CHGR2,
+	S5M8763_REG_LDO_ACTIVE_DISCHARGE1,
+	S5M8763_REG_LDO_ACTIVE_DISCHARGE2,
+	S5M8763_REG_BUCK_ACTIVE_DISCHARGE3,
+	S5M8763_REG_ONOFF1,
+	S5M8763_REG_ONOFF2,
+	S5M8763_REG_ONOFF3,
+	S5M8763_REG_ONOFF4,
+	S5M8763_REG_BUCK1_VOLTAGE1,
+	S5M8763_REG_BUCK1_VOLTAGE2,
+	S5M8763_REG_BUCK1_VOLTAGE3,
+	S5M8763_REG_BUCK1_VOLTAGE4,
+	S5M8763_REG_BUCK2_VOLTAGE1,
+	S5M8763_REG_BUCK2_VOLTAGE2,
+	S5M8763_REG_BUCK3,
+	S5M8763_REG_BUCK4,
+	S5M8763_REG_LDO1_LDO2,
+	S5M8763_REG_LDO3,
+	S5M8763_REG_LDO4,
+	S5M8763_REG_LDO5,
+	S5M8763_REG_LDO6,
+	S5M8763_REG_LDO7,
+	S5M8763_REG_LDO7_LDO8,
+	S5M8763_REG_LDO9_LDO10,
+	S5M8763_REG_LDO11,
+	S5M8763_REG_LDO12,
+	S5M8763_REG_LDO13,
+	S5M8763_REG_LDO14,
+	S5M8763_REG_LDO15,
+	S5M8763_REG_LDO16,
+	S5M8763_REG_BKCHR,
+	S5M8763_REG_LBCNFG1,
+	S5M8763_REG_LBCNFG2,
+};
+
+enum s5m8767_irq {
+	S5M8767_IRQ_PWRR,
+	S5M8767_IRQ_PWRF,
+	S5M8767_IRQ_PWR1S,
+	S5M8767_IRQ_JIGR,
+	S5M8767_IRQ_JIGF,
+	S5M8767_IRQ_LOWBAT2,
+	S5M8767_IRQ_LOWBAT1,
+
+	S5M8767_IRQ_MRB,
+	S5M8767_IRQ_DVSOK2,
+	S5M8767_IRQ_DVSOK3,
+	S5M8767_IRQ_DVSOK4,
+
+	S5M8767_IRQ_RTC60S,
+	S5M8767_IRQ_RTCA1,
+	S5M8767_IRQ_RTCA2,
+	S5M8767_IRQ_SMPL,
+	S5M8767_IRQ_RTC1S,
+	S5M8767_IRQ_WTSR,
+
+	S5M8767_IRQ_NR,
+};
+
+#define S5M8767_IRQ_PWRR_MASK		(1 << 0)
+#define S5M8767_IRQ_PWRF_MASK		(1 << 1)
+#define S5M8767_IRQ_PWR1S_MASK		(1 << 3)
+#define S5M8767_IRQ_JIGR_MASK		(1 << 4)
+#define S5M8767_IRQ_JIGF_MASK		(1 << 5)
+#define S5M8767_IRQ_LOWBAT2_MASK	(1 << 6)
+#define S5M8767_IRQ_LOWBAT1_MASK	(1 << 7)
+
+#define S5M8767_IRQ_MRB_MASK		(1 << 2)
+#define S5M8767_IRQ_DVSOK2_MASK		(1 << 3)
+#define S5M8767_IRQ_DVSOK3_MASK		(1 << 4)
+#define S5M8767_IRQ_DVSOK4_MASK		(1 << 5)
+
+#define S5M8767_IRQ_RTC60S_MASK		(1 << 0)
+#define S5M8767_IRQ_RTCA1_MASK		(1 << 1)
+#define S5M8767_IRQ_RTCA2_MASK		(1 << 2)
+#define S5M8767_IRQ_SMPL_MASK		(1 << 3)
+#define S5M8767_IRQ_RTC1S_MASK		(1 << 4)
+#define S5M8767_IRQ_WTSR_MASK		(1 << 5)
+
+enum s5m8763_irq {
+	S5M8763_IRQ_DCINF,
+	S5M8763_IRQ_DCINR,
+	S5M8763_IRQ_JIGF,
+	S5M8763_IRQ_JIGR,
+	S5M8763_IRQ_PWRONF,
+	S5M8763_IRQ_PWRONR,
+
+	S5M8763_IRQ_WTSREVNT,
+	S5M8763_IRQ_SMPLEVNT,
+	S5M8763_IRQ_ALARM1,
+	S5M8763_IRQ_ALARM0,
+
+	S5M8763_IRQ_ONKEY1S,
+	S5M8763_IRQ_TOPOFFR,
+	S5M8763_IRQ_DCINOVPR,
+	S5M8763_IRQ_CHGRSTF,
+	S5M8763_IRQ_DONER,
+	S5M8763_IRQ_CHGFAULT,
+
+	S5M8763_IRQ_LOBAT1,
+	S5M8763_IRQ_LOBAT2,
+
+	S5M8763_IRQ_NR,
+};
+
+#define S5M8763_IRQ_DCINF_MASK		(1 << 2)
+#define S5M8763_IRQ_DCINR_MASK		(1 << 3)
+#define S5M8763_IRQ_JIGF_MASK		(1 << 4)
+#define S5M8763_IRQ_JIGR_MASK		(1 << 5)
+#define S5M8763_IRQ_PWRONF_MASK		(1 << 6)
+#define S5M8763_IRQ_PWRONR_MASK		(1 << 7)
+
+#define S5M8763_IRQ_WTSREVNT_MASK	(1 << 0)
+#define S5M8763_IRQ_SMPLEVNT_MASK	(1 << 1)
+#define S5M8763_IRQ_ALARM1_MASK		(1 << 2)
+#define S5M8763_IRQ_ALARM0_MASK		(1 << 3)
+
+#define S5M8763_IRQ_ONKEY1S_MASK	(1 << 0)
+#define S5M8763_IRQ_TOPOFFR_MASK	(1 << 2)
+#define S5M8763_IRQ_DCINOVPR_MASK	(1 << 3)
+#define S5M8763_IRQ_CHGRSTF_MASK	(1 << 4)
+#define S5M8763_IRQ_DONER_MASK		(1 << 5)
+#define S5M8763_IRQ_CHGFAULT_MASK	(1 << 7)
+
+#define S5M8763_IRQ_LOBAT1_MASK		(1 << 0)
+#define S5M8763_IRQ_LOBAT2_MASK		(1 << 1)
+
+#define S5M8763_ENRAMP                  (1 << 4)
+
+/**
+ * struct s5m87xx_dev - s5m87xx master device for sub-drivers
+ * @dev: master device of the chip (can be used to access platform data)
+ * @i2c: i2c client private data for regulator
+ * @rtc: i2c client private data for rtc
+ * @iolock: mutex for serializing io access
+ * @irqlock: mutex for buslock
+ * @irq_base: base IRQ number for s5m87xx, required for IRQs
+ * @irq: generic IRQ number for s5m87xx
+ * @ono: power onoff IRQ number for s5m87xx
+ * @irq_masks_cur: currently active value
+ * @irq_masks_cache: cached hardware value
+ * @type: indicate which s5m87xx "variant" is used
+ */
+struct s5m87xx_dev {
+	struct device *dev;
+	struct regmap *regmap;
+	struct i2c_client *i2c;
+	struct i2c_client *rtc;
+	struct mutex iolock;
+	struct mutex irqlock;
+
+	int device_type;
+	int irq_base;
+	int irq;
+	int ono;
+	u8 irq_masks_cur[NUM_IRQ_REGS];
+	u8 irq_masks_cache[NUM_IRQ_REGS];
+	int type;
+	bool wakeup;
+};
+
+int s5m_irq_init(struct s5m87xx_dev *s5m87xx);
+void s5m_irq_exit(struct s5m87xx_dev *s5m87xx);
+int s5m_irq_resume(struct s5m87xx_dev *s5m87xx);
+
+extern int s5m_reg_read(struct s5m87xx_dev *s5m87xx, u8 reg, void *dest);
+extern int s5m_bulk_read(struct s5m87xx_dev *s5m87xx, u8 reg, int count, u8 *buf);
+extern int s5m_reg_write(struct s5m87xx_dev *s5m87xx, u8 reg, u8 value);
+extern int s5m_bulk_write(struct s5m87xx_dev *s5m87xx, u8 reg, int count, u8 *buf);
+extern int s5m_reg_update(struct s5m87xx_dev *s5m87xx, u8 reg, u8 val, u8 mask);
+
+struct s5m_platform_data {
+	struct s5m_regulator_data	*regulators;
+	int				device_type;
+	int				num_regulators;
+
+	int				irq_base;
+	int 				(*cfg_pmic_irq)(void);
+
+	int				ono;
+	bool				wakeup;
+	bool				buck_voltage_lock;
+
+	int				buck_gpios[3];
+	int				buck2_voltage[8];
+	bool				buck2_gpiodvs;
+	int				buck3_voltage[8];
+	bool				buck3_gpiodvs;
+	int				buck4_voltage[8];
+	bool				buck4_gpiodvs;
+
+	int				buck_set1;
+	int				buck_set2;
+	int				buck_set3;
+	int				buck2_enable;
+	int				buck3_enable;
+	int				buck4_enable;
+	int				buck_default_idx;
+	int				buck2_default_idx;
+	int				buck3_default_idx;
+	int				buck4_default_idx;
+
+	int                             buck_ramp_delay;
+	bool                            buck2_ramp_enable;
+	bool                            buck3_ramp_enable;
+	bool                            buck4_ramp_enable;
+};
+
+#endif /*  __LINUX_MFD_S5M_CORE_H */
diff --git a/include/linux/mfd/s5m87xx/s5m-pmic.h b/include/linux/mfd/s5m87xx/s5m-pmic.h
new file mode 100644
index 00000000..a72a5d27
--- /dev/null
+++ b/include/linux/mfd/s5m87xx/s5m-pmic.h
@@ -0,0 +1,100 @@
+/* s5m87xx.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __LINUX_MFD_S5M_PMIC_H
+#define __LINUX_MFD_S5M_PMIC_H
+
+#include <linux/regulator/machine.h>
+
+/* S5M8767 regulator ids */
+enum s5m8767_regulators {
+	S5M8767_LDO1,
+	S5M8767_LDO2,
+	S5M8767_LDO3,
+	S5M8767_LDO4,
+	S5M8767_LDO5,
+	S5M8767_LDO6,
+	S5M8767_LDO7,
+	S5M8767_LDO8,
+	S5M8767_LDO9,
+	S5M8767_LDO10,
+	S5M8767_LDO11,
+	S5M8767_LDO12,
+	S5M8767_LDO13,
+	S5M8767_LDO14,
+	S5M8767_LDO15,
+	S5M8767_LDO16,
+	S5M8767_LDO17,
+	S5M8767_LDO18,
+	S5M8767_LDO19,
+	S5M8767_LDO20,
+	S5M8767_LDO21,
+	S5M8767_LDO22,
+	S5M8767_LDO23,
+	S5M8767_LDO24,
+	S5M8767_LDO25,
+	S5M8767_LDO26,
+	S5M8767_LDO27,
+	S5M8767_LDO28,
+	S5M8767_BUCK1,
+	S5M8767_BUCK2,
+	S5M8767_BUCK3,
+	S5M8767_BUCK4,
+	S5M8767_BUCK5,
+	S5M8767_BUCK6,
+	S5M8767_BUCK7,
+	S5M8767_BUCK8,
+	S5M8767_BUCK9,
+	S5M8767_AP_EN32KHZ,
+	S5M8767_CP_EN32KHZ,
+
+	S5M8767_REG_MAX,
+};
+
+/* S5M8763 regulator ids */
+enum s5m8763_regulators {
+	S5M8763_LDO1,
+	S5M8763_LDO2,
+	S5M8763_LDO3,
+	S5M8763_LDO4,
+	S5M8763_LDO5,
+	S5M8763_LDO6,
+	S5M8763_LDO7,
+	S5M8763_LDO8,
+	S5M8763_LDO9,
+	S5M8763_LDO10,
+	S5M8763_LDO11,
+	S5M8763_LDO12,
+	S5M8763_LDO13,
+	S5M8763_LDO14,
+	S5M8763_LDO15,
+	S5M8763_LDO16,
+	S5M8763_BUCK1,
+	S5M8763_BUCK2,
+	S5M8763_BUCK3,
+	S5M8763_BUCK4,
+	S5M8763_AP_EN32KHZ,
+	S5M8763_CP_EN32KHZ,
+	S5M8763_ENCHGVI,
+	S5M8763_ESAFEUSB1,
+	S5M8763_ESAFEUSB2,
+};
+
+/**
+ * s5m87xx_regulator_data - regulator data
+ * @id: regulator id
+ * @initdata: regulator init data (contraints, supplies, ...)
+ */
+struct s5m_regulator_data {
+	int				id;
+	struct regulator_init_data	*initdata;
+};
+
+#endif /*  __LINUX_MFD_S5M_PMIC_H */
diff --git a/include/linux/mfd/s5m87xx/s5m-rtc.h b/include/linux/mfd/s5m87xx/s5m-rtc.h
new file mode 100644
index 00000000..6ce8da26
--- /dev/null
+++ b/include/linux/mfd/s5m87xx/s5m-rtc.h
@@ -0,0 +1,84 @@
+/*
+ * s5m-rtc.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd
+ *              http://www.samsung.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __LINUX_MFD_S5M_RTC_H
+#define __LINUX_MFD_S5M_RTC_H
+
+enum s5m87xx_rtc_reg {
+	S5M87XX_RTC_SEC,
+	S5M87XX_RTC_MIN,
+	S5M87XX_RTC_HOUR,
+	S5M87XX_RTC_WEEKDAY,
+	S5M87XX_RTC_DATE,
+	S5M87XX_RTC_MONTH,
+	S5M87XX_RTC_YEAR1,
+	S5M87XX_RTC_YEAR2,
+	S5M87XX_ALARM0_SEC,
+	S5M87XX_ALARM0_MIN,
+	S5M87XX_ALARM0_HOUR,
+	S5M87XX_ALARM0_WEEKDAY,
+	S5M87XX_ALARM0_DATE,
+	S5M87XX_ALARM0_MONTH,
+	S5M87XX_ALARM0_YEAR1,
+	S5M87XX_ALARM0_YEAR2,
+	S5M87XX_ALARM1_SEC,
+	S5M87XX_ALARM1_MIN,
+	S5M87XX_ALARM1_HOUR,
+	S5M87XX_ALARM1_WEEKDAY,
+	S5M87XX_ALARM1_DATE,
+	S5M87XX_ALARM1_MONTH,
+	S5M87XX_ALARM1_YEAR1,
+	S5M87XX_ALARM1_YEAR2,
+	S5M87XX_ALARM0_CONF,
+	S5M87XX_ALARM1_CONF,
+	S5M87XX_RTC_STATUS,
+	S5M87XX_WTSR_SMPL_CNTL,
+	S5M87XX_RTC_UDR_CON,
+};
+
+#define RTC_I2C_ADDR		(0x0C >> 1)
+
+#define HOUR_12			(1 << 7)
+#define HOUR_AMPM		(1 << 6)
+#define HOUR_PM			(1 << 5)
+#define ALARM0_STATUS		(1 << 1)
+#define ALARM1_STATUS		(1 << 2)
+#define UPDATE_AD		(1 << 0)
+
+/* RTC Control Register */
+#define BCD_EN_SHIFT		0
+#define BCD_EN_MASK		(1 << BCD_EN_SHIFT)
+#define MODEL24_SHIFT		1
+#define MODEL24_MASK		(1 << MODEL24_SHIFT)
+/* RTC Update Register1 */
+#define RTC_UDR_SHIFT		0
+#define RTC_UDR_MASK		(1 << RTC_UDR_SHIFT)
+/* RTC Hour register */
+#define HOUR_PM_SHIFT		6
+#define HOUR_PM_MASK		(1 << HOUR_PM_SHIFT)
+/* RTC Alarm Enable */
+#define ALARM_ENABLE_SHIFT	7
+#define ALARM_ENABLE_MASK	(1 << ALARM_ENABLE_SHIFT)
+
+enum {
+	RTC_SEC = 0,
+	RTC_MIN,
+	RTC_HOUR,
+	RTC_WEEKDAY,
+	RTC_DATE,
+	RTC_MONTH,
+	RTC_YEAR1,
+	RTC_YEAR2,
+};
+
+#endif /*  __LINUX_MFD_S5M_RTC_H */
diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
new file mode 100644
index 00000000..8516fd1e
--- /dev/null
+++ b/include/linux/mfd/stmpe.h
@@ -0,0 +1,225 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ */
+
+#ifndef __LINUX_MFD_STMPE_H
+#define __LINUX_MFD_STMPE_H
+
+#include <linux/mutex.h>
+
+struct device;
+
+enum stmpe_block {
+	STMPE_BLOCK_GPIO	= 1 << 0,
+	STMPE_BLOCK_KEYPAD	= 1 << 1,
+	STMPE_BLOCK_TOUCHSCREEN	= 1 << 2,
+	STMPE_BLOCK_ADC		= 1 << 3,
+	STMPE_BLOCK_PWM		= 1 << 4,
+	STMPE_BLOCK_ROTATOR	= 1 << 5,
+};
+
+enum stmpe_partnum {
+	STMPE610,
+	STMPE801,
+	STMPE811,
+	STMPE1601,
+	STMPE2401,
+	STMPE2403,
+	STMPE_NBR_PARTS
+};
+
+/*
+ * For registers whose locations differ on variants,  the correct address is
+ * obtained by indexing stmpe->regs with one of the following.
+ */
+enum {
+	STMPE_IDX_CHIP_ID,
+	STMPE_IDX_ICR_LSB,
+	STMPE_IDX_IER_LSB,
+	STMPE_IDX_ISR_MSB,
+	STMPE_IDX_GPMR_LSB,
+	STMPE_IDX_GPSR_LSB,
+	STMPE_IDX_GPCR_LSB,
+	STMPE_IDX_GPDR_LSB,
+	STMPE_IDX_GPEDR_MSB,
+	STMPE_IDX_GPRER_LSB,
+	STMPE_IDX_GPFER_LSB,
+	STMPE_IDX_GPAFR_U_MSB,
+	STMPE_IDX_IEGPIOR_LSB,
+	STMPE_IDX_ISGPIOR_MSB,
+	STMPE_IDX_MAX,
+};
+
+
+struct stmpe_variant_info;
+struct stmpe_client_info;
+
+/**
+ * struct stmpe - STMPE MFD structure
+ * @lock: lock protecting I/O operations
+ * @irq_lock: IRQ bus lock
+ * @dev: device, mostly for dev_dbg()
+ * @client: client - i2c or spi
+ * @ci: client specific information
+ * @partnum: part number
+ * @variant: the detected STMPE model number
+ * @regs: list of addresses of registers which are at different addresses on
+ *	  different variants.  Indexed by one of STMPE_IDX_*.
+ * @irq: irq number for stmpe
+ * @irq_base: starting IRQ number for internal IRQs
+ * @num_gpios: number of gpios, differs for variants
+ * @ier: cache of IER registers for bus_lock
+ * @oldier: cache of IER registers for bus_lock
+ * @pdata: platform data
+ */
+struct stmpe {
+	struct mutex lock;
+	struct mutex irq_lock;
+	struct device *dev;
+	void *client;
+	struct stmpe_client_info *ci;
+	enum stmpe_partnum partnum;
+	struct stmpe_variant_info *variant;
+	const u8 *regs;
+
+	int irq;
+	int irq_base;
+	int num_gpios;
+	u8 ier[2];
+	u8 oldier[2];
+	struct stmpe_platform_data *pdata;
+};
+
+extern int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 data);
+extern int stmpe_reg_read(struct stmpe *stmpe, u8 reg);
+extern int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length,
+			    u8 *values);
+extern int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
+			     const u8 *values);
+extern int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val);
+extern int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins,
+			     enum stmpe_block block);
+extern int stmpe_enable(struct stmpe *stmpe, unsigned int blocks);
+extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks);
+
+struct matrix_keymap_data;
+
+/**
+ * struct stmpe_keypad_platform_data - STMPE keypad platform data
+ * @keymap_data: key map table and size
+ * @debounce_ms: debounce interval, in ms.  Maximum is
+ *		 %STMPE_KEYPAD_MAX_DEBOUNCE.
+ * @scan_count: number of key scanning cycles to confirm key data.
+ *		Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT.
+ * @no_autorepeat: disable key autorepeat
+ */
+struct stmpe_keypad_platform_data {
+	struct matrix_keymap_data *keymap_data;
+	unsigned int debounce_ms;
+	unsigned int scan_count;
+	bool no_autorepeat;
+};
+
+#define STMPE_GPIO_NOREQ_811_TOUCH	(0xf0)
+
+/**
+ * struct stmpe_gpio_platform_data - STMPE GPIO platform data
+ * @gpio_base: first gpio number assigned.  A maximum of
+ *	       %STMPE_NR_GPIOS GPIOs will be allocated.
+ * @norequest_mask: bitmask specifying which GPIOs should _not_ be
+ *		    requestable due to different usage (e.g. touch, keypad)
+ *		    STMPE_GPIO_NOREQ_* macros can be used here.
+ * @setup: board specific setup callback.
+ * @remove: board specific remove callback
+ */
+struct stmpe_gpio_platform_data {
+	int gpio_base;
+	unsigned norequest_mask;
+	void (*setup)(struct stmpe *stmpe, unsigned gpio_base);
+	void (*remove)(struct stmpe *stmpe, unsigned gpio_base);
+};
+
+/**
+ * struct stmpe_ts_platform_data - stmpe811 touch screen controller platform
+ * data
+ * @sample_time: ADC converstion time in number of clock.
+ * (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks,
+ * 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks),
+ * recommended is 4.
+ * @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
+ * @ref_sel: ADC reference source
+ * (0 -> internal reference, 1 -> external reference)
+ * @adc_freq: ADC Clock speed
+ * (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz)
+ * @ave_ctrl: Sample average control
+ * (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples)
+ * @touch_det_delay: Touch detect interrupt delay
+ * (0 -> 10 us, 1 -> 50 us, 2 -> 100 us, 3 -> 500 us,
+ * 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms)
+ * recommended is 3
+ * @settling: Panel driver settling time
+ * (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 -> 1 ms,
+ * 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms)
+ * recommended is 2
+ * @fraction_z: Length of the fractional part in z
+ * (fraction_z ([0..7]) = Count of the fractional part)
+ * recommended is 7
+ * @i_drive: current limit value of the touchscreen drivers
+ * (0 -> 20 mA typical 35 mA max, 1 -> 50 mA typical 80 mA max)
+ *
+ * */
+struct stmpe_ts_platform_data {
+       u8 sample_time;
+       u8 mod_12b;
+       u8 ref_sel;
+       u8 adc_freq;
+       u8 ave_ctrl;
+       u8 touch_det_delay;
+       u8 settling;
+       u8 fraction_z;
+       u8 i_drive;
+};
+
+/**
+ * struct stmpe_platform_data - STMPE platform data
+ * @id: device id to distinguish between multiple STMPEs on the same board
+ * @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*)
+ * @irq_trigger: IRQ trigger to use for the interrupt to the host
+ * @irq_invert_polarity: IRQ line is connected with reversed polarity
+ * @autosleep: bool to enable/disable stmpe autosleep
+ * @autosleep_timeout: inactivity timeout in milliseconds for autosleep
+ * @irq_base: base IRQ number.  %STMPE_NR_IRQS irqs will be used, or
+ *	      %STMPE_NR_INTERNAL_IRQS if the GPIO driver is not used.
+ * @irq_over_gpio: true if gpio is used to get irq
+ * @irq_gpio: gpio number over which irq will be requested (significant only if
+ *	      irq_over_gpio is true)
+ * @gpio: GPIO-specific platform data
+ * @keypad: keypad-specific platform data
+ * @ts: touchscreen-specific platform data
+ */
+struct stmpe_platform_data {
+	int id;
+	unsigned int blocks;
+	int irq_base;
+	unsigned int irq_trigger;
+	bool irq_invert_polarity;
+	bool autosleep;
+	bool irq_over_gpio;
+	int irq_gpio;
+	int autosleep_timeout;
+
+	struct stmpe_gpio_platform_data *gpio;
+	struct stmpe_keypad_platform_data *keypad;
+	struct stmpe_ts_platform_data *ts;
+};
+
+#define STMPE_NR_INTERNAL_IRQS	9
+#define STMPE_INT_GPIO(x)	(STMPE_NR_INTERNAL_IRQS + (x))
+
+#define STMPE_NR_GPIOS		24
+#define STMPE_NR_IRQS		STMPE_INT_GPIO(STMPE_NR_GPIOS)
+
+#endif
diff --git a/include/linux/mfd/t7l66xb.h b/include/linux/mfd/t7l66xb.h
new file mode 100644
index 00000000..b4629818
--- /dev/null
+++ b/include/linux/mfd/t7l66xb.h
@@ -0,0 +1,34 @@
+/*
+ * This file contains the definitions for the T7L66XB
+ *
+ * (C) Copyright 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef MFD_T7L66XB_H
+#define MFD_T7L66XB_H
+
+#include <linux/mfd/core.h>
+#include <linux/mfd/tmio.h>
+
+struct t7l66xb_platform_data {
+	int (*enable)(struct platform_device *dev);
+	int (*disable)(struct platform_device *dev);
+	int (*suspend)(struct platform_device *dev);
+	int (*resume)(struct platform_device *dev);
+
+	int irq_base; /* The base for subdevice irqs */
+
+	struct tmio_nand_data *nand_data;
+};
+
+
+#define IRQ_T7L66XB_MMC        (1)
+#define IRQ_T7L66XB_NAND       (3)
+
+#define T7L66XB_NR_IRQS	8
+
+#endif
diff --git a/include/linux/mfd/tc3589x.h b/include/linux/mfd/tc3589x.h
new file mode 100644
index 00000000..3acb3a8e
--- /dev/null
+++ b/include/linux/mfd/tc3589x.h
@@ -0,0 +1,195 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License, version 2
+ */
+
+#ifndef __LINUX_MFD_TC3589x_H
+#define __LINUX_MFD_TC3589x_H
+
+struct device;
+
+enum tx3589x_block {
+	TC3589x_BLOCK_GPIO        = 1 << 0,
+	TC3589x_BLOCK_KEYPAD      = 1 << 1,
+};
+
+#define TC3589x_RSTCTRL_IRQRST	(1 << 4)
+#define TC3589x_RSTCTRL_TIMRST	(1 << 3)
+#define TC3589x_RSTCTRL_ROTRST	(1 << 2)
+#define TC3589x_RSTCTRL_KBDRST	(1 << 1)
+#define TC3589x_RSTCTRL_GPIRST	(1 << 0)
+
+/* Keyboard Configuration Registers */
+#define TC3589x_KBDSETTLE_REG   0x01
+#define TC3589x_KBDBOUNCE       0x02
+#define TC3589x_KBDSIZE         0x03
+#define TC3589x_KBCFG_LSB       0x04
+#define TC3589x_KBCFG_MSB       0x05
+#define TC3589x_KBDIC           0x08
+#define TC3589x_KBDMSK          0x09
+#define TC3589x_EVTCODE_FIFO    0x10
+#define TC3589x_KBDMFS		0x8F
+
+#define TC3589x_IRQST		0x91
+
+#define TC3589x_MANFCODE_MAGIC	0x03
+#define TC3589x_MANFCODE	0x80
+#define TC3589x_VERSION		0x81
+#define TC3589x_IOCFG		0xA7
+
+#define TC3589x_CLKMODE		0x88
+#define TC3589x_CLKCFG		0x89
+#define TC3589x_CLKEN		0x8A
+
+#define TC3589x_RSTCTRL		0x82
+#define TC3589x_EXTRSTN		0x83
+#define TC3589x_RSTINTCLR	0x84
+
+/* Pull up/down configuration registers */
+#define TC3589x_IOCFG           0xA7
+#define TC3589x_IOPULLCFG0_LSB  0xAA
+#define TC3589x_IOPULLCFG0_MSB  0xAB
+#define TC3589x_IOPULLCFG1_LSB  0xAC
+#define TC3589x_IOPULLCFG1_MSB  0xAD
+#define TC3589x_IOPULLCFG2_LSB  0xAE
+
+#define TC3589x_GPIOIS0		0xC9
+#define TC3589x_GPIOIS1		0xCA
+#define TC3589x_GPIOIS2		0xCB
+#define TC3589x_GPIOIBE0	0xCC
+#define TC3589x_GPIOIBE1	0xCD
+#define TC3589x_GPIOIBE2	0xCE
+#define TC3589x_GPIOIEV0	0xCF
+#define TC3589x_GPIOIEV1	0xD0
+#define TC3589x_GPIOIEV2	0xD1
+#define TC3589x_GPIOIE0		0xD2
+#define TC3589x_GPIOIE1		0xD3
+#define TC3589x_GPIOIE2		0xD4
+#define TC3589x_GPIORIS0	0xD6
+#define TC3589x_GPIORIS1	0xD7
+#define TC3589x_GPIORIS2	0xD8
+#define TC3589x_GPIOMIS0	0xD9
+#define TC3589x_GPIOMIS1	0xDA
+#define TC3589x_GPIOMIS2	0xDB
+#define TC3589x_GPIOIC0		0xDC
+#define TC3589x_GPIOIC1		0xDD
+#define TC3589x_GPIOIC2		0xDE
+
+#define TC3589x_GPIODATA0	0xC0
+#define TC3589x_GPIOMASK0	0xc1
+#define TC3589x_GPIODATA1	0xC2
+#define TC3589x_GPIOMASK1	0xc3
+#define TC3589x_GPIODATA2	0xC4
+#define TC3589x_GPIOMASK2	0xC5
+
+#define TC3589x_GPIODIR0	0xC6
+#define TC3589x_GPIODIR1	0xC7
+#define TC3589x_GPIODIR2	0xC8
+
+#define TC3589x_GPIOSYNC0	0xE6
+#define TC3589x_GPIOSYNC1	0xE7
+#define TC3589x_GPIOSYNC2	0xE8
+
+#define TC3589x_GPIOWAKE0	0xE9
+#define TC3589x_GPIOWAKE1	0xEA
+#define TC3589x_GPIOWAKE2	0xEB
+
+#define TC3589x_GPIOODM0	0xE0
+#define TC3589x_GPIOODE0	0xE1
+#define TC3589x_GPIOODM1	0xE2
+#define TC3589x_GPIOODE1	0xE3
+#define TC3589x_GPIOODM2	0xE4
+#define TC3589x_GPIOODE2	0xE5
+
+#define TC3589x_INT_GPIIRQ	0
+#define TC3589x_INT_TI0IRQ	1
+#define TC3589x_INT_TI1IRQ	2
+#define TC3589x_INT_TI2IRQ	3
+#define TC3589x_INT_ROTIRQ	5
+#define TC3589x_INT_KBDIRQ	6
+#define TC3589x_INT_PORIRQ	7
+
+#define TC3589x_NR_INTERNAL_IRQS	8
+#define TC3589x_INT_GPIO(x)	(TC3589x_NR_INTERNAL_IRQS + (x))
+
+struct tc3589x {
+	struct mutex lock;
+	struct device *dev;
+	struct i2c_client *i2c;
+
+	int irq_base;
+	int num_gpio;
+	struct tc3589x_platform_data *pdata;
+};
+
+extern int tc3589x_reg_write(struct tc3589x *tc3589x, u8 reg, u8 data);
+extern int tc3589x_reg_read(struct tc3589x *tc3589x, u8 reg);
+extern int tc3589x_block_read(struct tc3589x *tc3589x, u8 reg, u8 length,
+			      u8 *values);
+extern int tc3589x_block_write(struct tc3589x *tc3589x, u8 reg, u8 length,
+			       const u8 *values);
+extern int tc3589x_set_bits(struct tc3589x *tc3589x, u8 reg, u8 mask, u8 val);
+
+/*
+ * Keypad related platform specific constants
+ * These values may be modified for fine tuning
+ */
+#define TC_KPD_ROWS             0x8
+#define TC_KPD_COLUMNS          0x8
+#define TC_KPD_DEBOUNCE_PERIOD  0xA3
+#define TC_KPD_SETTLE_TIME      0xA3
+
+/**
+ * struct tc35893_platform_data - data structure for platform specific data
+ * @keymap_data:        matrix scan code table for keycodes
+ * @krow:               mask for available rows, value is 0xFF
+ * @kcol:               mask for available columns, value is 0xFF
+ * @debounce_period:    platform specific debounce time
+ * @settle_time:        platform specific settle down time
+ * @irqtype:            type of interrupt, falling or rising edge
+ * @enable_wakeup:      specifies if keypad event can wake up system from sleep
+ * @no_autorepeat:      flag for auto repetition
+ */
+struct tc3589x_keypad_platform_data {
+	const struct matrix_keymap_data *keymap_data;
+	u8                      krow;
+	u8                      kcol;
+	u8                      debounce_period;
+	u8                      settle_time;
+	unsigned long           irqtype;
+	bool                    enable_wakeup;
+	bool                    no_autorepeat;
+};
+
+/**
+ * struct tc3589x_gpio_platform_data - TC3589x GPIO platform data
+ * @gpio_base: first gpio number assigned to TC3589x.  A maximum of
+ *	       %TC3589x_NR_GPIOS GPIOs will be allocated.
+ * @setup: callback for board-specific initialization
+ * @remove: callback for board-specific teardown
+ */
+struct tc3589x_gpio_platform_data {
+	int gpio_base;
+	void (*setup)(struct tc3589x *tc3589x, unsigned gpio_base);
+	void (*remove)(struct tc3589x *tc3589x, unsigned gpio_base);
+};
+
+/**
+ * struct tc3589x_platform_data - TC3589x platform data
+ * @block: bitmask of blocks to enable (use TC3589x_BLOCK_*)
+ * @irq_base: base IRQ number.  %TC3589x_NR_IRQS irqs will be used.
+ * @gpio: GPIO-specific platform data
+ * @keypad: keypad-specific platform data
+ */
+struct tc3589x_platform_data {
+	unsigned int block;
+	int irq_base;
+	struct tc3589x_gpio_platform_data *gpio;
+	const struct tc3589x_keypad_platform_data *keypad;
+};
+
+#define TC3589x_NR_GPIOS	24
+#define TC3589x_NR_IRQS		TC3589x_INT_GPIO(TC3589x_NR_GPIOS)
+
+#endif
diff --git a/include/linux/mfd/tc6387xb.h b/include/linux/mfd/tc6387xb.h
new file mode 100644
index 00000000..b4888209
--- /dev/null
+++ b/include/linux/mfd/tc6387xb.h
@@ -0,0 +1,20 @@
+/*
+ * This file contains the definitions for the TC6387XB
+ *
+ * (C) Copyright 2005 Ian Molton <spyro@f2s.com>
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ */
+#ifndef MFD_TC6387XB_H
+#define MFD_TC6387XB_H
+
+struct tc6387xb_platform_data {
+	int (*enable)(struct platform_device *dev);
+	int (*disable)(struct platform_device *dev);
+	int (*suspend)(struct platform_device *dev);
+	int (*resume)(struct platform_device *dev);
+};
+
+#endif
diff --git a/include/linux/mfd/tc6393xb.h b/include/linux/mfd/tc6393xb.h
new file mode 100644
index 00000000..626e4482
--- /dev/null
+++ b/include/linux/mfd/tc6393xb.h
@@ -0,0 +1,59 @@
+/*
+ * Toshiba TC6393XB SoC support
+ *
+ * Copyright(c) 2005-2006 Chris Humbert
+ * Copyright(c) 2005 Dirk Opfer
+ * Copyright(c) 2005 Ian Molton <spyro@f2s.com>
+ * Copyright(c) 2007 Dmitry Baryshkov
+ *
+ * Based on code written by Sharp/Lineo for 2.4 kernels
+ * Based on locomo.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MFD_TC6393XB_H
+#define MFD_TC6393XB_H
+
+#include <linux/fb.h>
+
+/* Also one should provide the CK3P6MI clock */
+struct tc6393xb_platform_data {
+	u16	scr_pll2cr;	/* PLL2 Control */
+	u16	scr_gper;	/* GP Enable */
+
+	int	(*enable)(struct platform_device *dev);
+	int	(*disable)(struct platform_device *dev);
+	int	(*suspend)(struct platform_device *dev);
+	int	(*resume)(struct platform_device *dev);
+
+	int	irq_base;	/* base for subdevice irqs */
+	int	gpio_base;
+	int	(*setup)(struct platform_device *dev);
+	void	(*teardown)(struct platform_device *dev);
+
+	struct tmio_nand_data	*nand_data;
+	struct tmio_fb_data	*fb_data;
+
+	unsigned resume_restore : 1; /* make special actions
+					to preserve the state
+					on suspend/resume */
+};
+
+extern int tc6393xb_lcd_mode(struct platform_device *fb,
+			     const struct fb_videomode *mode);
+extern int tc6393xb_lcd_set_power(struct platform_device *fb, bool on);
+
+/*
+ * Relative to irq_base
+ */
+#define	IRQ_TC6393_NAND		0
+#define	IRQ_TC6393_MMC		1
+#define	IRQ_TC6393_OHCI		2
+#define	IRQ_TC6393_FB		4
+
+#define	TC6393XB_NR_IRQS	8
+
+#endif
diff --git a/include/linux/mfd/ti_ssp.h b/include/linux/mfd/ti_ssp.h
new file mode 100644
index 00000000..dbb4b43b
--- /dev/null
+++ b/include/linux/mfd/ti_ssp.h
@@ -0,0 +1,93 @@
+/*
+ * Sequencer Serial Port (SSP) driver for Texas Instruments' SoCs
+ *
+ * Copyright (C) 2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __TI_SSP_H__
+#define __TI_SSP_H__
+
+struct ti_ssp_dev_data {
+	const char	*dev_name;
+	void		*pdata;
+	size_t		pdata_size;
+};
+
+struct ti_ssp_data {
+	unsigned long		out_clock;
+	struct ti_ssp_dev_data	dev_data[2];
+};
+
+struct ti_ssp_spi_data {
+	unsigned long	iosel;
+	int		num_cs;
+	void		(*select)(int cs);
+};
+
+/*
+ * Sequencer port IO pin configuration bits.  These do not correlate 1-1 with
+ * the hardware.  The iosel field in the port data combines iosel1 and iosel2,
+ * and is therefore not a direct map to register space.  It is best to use the
+ * macros below to construct iosel values.
+ *
+ * least significant 16 bits --> iosel1
+ * most significant 16 bits  --> iosel2
+ */
+
+#define SSP_IN			0x0000
+#define SSP_DATA		0x0001
+#define SSP_CLOCK		0x0002
+#define SSP_CHIPSEL		0x0003
+#define SSP_OUT			0x0004
+#define SSP_PIN_SEL(pin, v)	((v) << ((pin) * 3))
+#define SSP_PIN_MASK(pin)	SSP_PIN_SEL(pin, 0x7)
+#define SSP_INPUT_SEL(pin)	((pin) << 16)
+
+/* Sequencer port config bits */
+#define SSP_EARLY_DIN		BIT(8)
+#define SSP_DELAY_DOUT		BIT(9)
+
+/* Sequence map definitions */
+#define SSP_CLK_HIGH		BIT(0)
+#define SSP_CLK_LOW		0
+#define SSP_DATA_HIGH		BIT(1)
+#define SSP_DATA_LOW		0
+#define SSP_CS_HIGH		BIT(2)
+#define SSP_CS_LOW		0
+#define SSP_OUT_MODE		BIT(3)
+#define SSP_IN_MODE		0
+#define SSP_DATA_REG		BIT(4)
+#define SSP_ADDR_REG		0
+
+#define SSP_OPCODE_DIRECT	((0x0) << 5)
+#define SSP_OPCODE_TOGGLE	((0x1) << 5)
+#define SSP_OPCODE_SHIFT	((0x2) << 5)
+#define SSP_OPCODE_BRANCH0	((0x4) << 5)
+#define SSP_OPCODE_BRANCH1	((0x5) << 5)
+#define SSP_OPCODE_BRANCH	((0x6) << 5)
+#define SSP_OPCODE_STOP		((0x7) << 5)
+#define SSP_BRANCH(addr)	((addr) << 8)
+#define SSP_COUNT(cycles)	((cycles) << 8)
+
+int ti_ssp_raw_read(struct device *dev);
+int ti_ssp_raw_write(struct device *dev, u32 val);
+int ti_ssp_load(struct device *dev, int offs, u32* prog, int len);
+int ti_ssp_run(struct device *dev, u32 pc, u32 input, u32 *output);
+int ti_ssp_set_mode(struct device *dev, int mode);
+int ti_ssp_set_iosel(struct device *dev, u32 iosel);
+
+#endif /* __TI_SSP_H__ */
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
new file mode 100644
index 00000000..f5171dbf
--- /dev/null
+++ b/include/linux/mfd/tmio.h
@@ -0,0 +1,153 @@
+#ifndef MFD_TMIO_H
+#define MFD_TMIO_H
+
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#define tmio_ioread8(addr) readb(addr)
+#define tmio_ioread16(addr) readw(addr)
+#define tmio_ioread16_rep(r, b, l) readsw(r, b, l)
+#define tmio_ioread32(addr) \
+	(((u32) readw((addr))) | (((u32) readw((addr) + 2)) << 16))
+
+#define tmio_iowrite8(val, addr) writeb((val), (addr))
+#define tmio_iowrite16(val, addr) writew((val), (addr))
+#define tmio_iowrite16_rep(r, b, l) writesw(r, b, l)
+#define tmio_iowrite32(val, addr) \
+	do { \
+	writew((val),       (addr)); \
+	writew((val) >> 16, (addr) + 2); \
+	} while (0)
+
+#define CNF_CMD     0x04
+#define CNF_CTL_BASE   0x10
+#define CNF_INT_PIN  0x3d
+#define CNF_STOP_CLK_CTL 0x40
+#define CNF_GCLK_CTL 0x41
+#define CNF_SD_CLK_MODE 0x42
+#define CNF_PIN_STATUS 0x44
+#define CNF_PWR_CTL_1 0x48
+#define CNF_PWR_CTL_2 0x49
+#define CNF_PWR_CTL_3 0x4a
+#define CNF_CARD_DETECT_MODE 0x4c
+#define CNF_SD_SLOT 0x50
+#define CNF_EXT_GCLK_CTL_1 0xf0
+#define CNF_EXT_GCLK_CTL_2 0xf1
+#define CNF_EXT_GCLK_CTL_3 0xf9
+#define CNF_SD_LED_EN_1 0xfa
+#define CNF_SD_LED_EN_2 0xfe
+
+#define   SDCREN 0x2   /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/
+
+#define sd_config_write8(base, shift, reg, val) \
+	tmio_iowrite8((val), (base) + ((reg) << (shift)))
+#define sd_config_write16(base, shift, reg, val) \
+	tmio_iowrite16((val), (base) + ((reg) << (shift)))
+#define sd_config_write32(base, shift, reg, val) \
+	do { \
+		tmio_iowrite16((val), (base) + ((reg) << (shift)));   \
+		tmio_iowrite16((val) >> 16, (base) + ((reg + 2) << (shift))); \
+	} while (0)
+
+/* tmio MMC platform flags */
+#define TMIO_MMC_WRPROTECT_DISABLE	(1 << 0)
+/*
+ * Some controllers can support a 2-byte block size when the bus width
+ * is configured in 4-bit mode.
+ */
+#define TMIO_MMC_BLKSZ_2BYTES		(1 << 1)
+/*
+ * Some controllers can support SDIO IRQ signalling.
+ */
+#define TMIO_MMC_SDIO_IRQ		(1 << 2)
+/*
+ * Some platforms can detect card insertion events with controller powered
+ * down, using a GPIO IRQ, in which case they have to fill in cd_irq, cd_gpio,
+ * and cd_flags fields of struct tmio_mmc_data.
+ */
+#define TMIO_MMC_HAS_COLD_CD		(1 << 3)
+/*
+ * Some controllers require waiting for the SD bus to become
+ * idle before writing to some registers.
+ */
+#define TMIO_MMC_HAS_IDLE_WAIT		(1 << 4)
+/*
+ * A GPIO is used for card hotplug detection. We need an extra flag for this,
+ * because 0 is a valid GPIO number too, and requiring users to specify
+ * cd_gpio < 0 to disable GPIO hotplug would break backwards compatibility.
+ */
+#define TMIO_MMC_USE_GPIO_CD		(1 << 5)
+
+int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base);
+int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base);
+void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state);
+void tmio_core_mmc_clk_div(void __iomem *cnf, int shift, int state);
+
+struct tmio_mmc_dma {
+	void *chan_priv_tx;
+	void *chan_priv_rx;
+	int alignment_shift;
+};
+
+struct tmio_mmc_host;
+
+/*
+ * data for the MMC controller
+ */
+struct tmio_mmc_data {
+	unsigned int			hclk;
+	unsigned long			capabilities;
+	unsigned long			flags;
+	u32				ocr_mask;	/* available voltages */
+	struct tmio_mmc_dma		*dma;
+	struct device			*dev;
+	unsigned int			cd_gpio;
+	void (*set_pwr)(struct platform_device *host, int state);
+	void (*set_clk_div)(struct platform_device *host, int state);
+	int (*get_cd)(struct platform_device *host);
+	int (*write16_hook)(struct tmio_mmc_host *host, int addr);
+};
+
+/*
+ * This function is deprecated and will be removed soon. Please, convert your
+ * platform to use drivers/mmc/core/cd-gpio.c
+ */
+#include <linux/mmc/host.h>
+static inline void tmio_mmc_cd_wakeup(struct tmio_mmc_data *pdata)
+{
+	if (pdata)
+		mmc_detect_change(dev_get_drvdata(pdata->dev),
+				  msecs_to_jiffies(100));
+}
+
+/*
+ * data for the NAND controller
+ */
+struct tmio_nand_data {
+	struct nand_bbt_descr	*badblock_pattern;
+	struct mtd_partition	*partition;
+	unsigned int		num_partitions;
+};
+
+#define FBIO_TMIO_ACC_WRITE	0x7C639300
+#define FBIO_TMIO_ACC_SYNC	0x7C639301
+
+struct tmio_fb_data {
+	int			(*lcd_set_power)(struct platform_device *fb_dev,
+								bool on);
+	int			(*lcd_mode)(struct platform_device *fb_dev,
+					const struct fb_videomode *mode);
+	int			num_modes;
+	struct fb_videomode	*modes;
+
+	/* in mm: size of screen */
+	int			height;
+	int			width;
+};
+
+
+#endif
diff --git a/include/linux/mfd/tps6105x.h b/include/linux/mfd/tps6105x.h
new file mode 100644
index 00000000..386743dd
--- /dev/null
+++ b/include/linux/mfd/tps6105x.h
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2011 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef MFD_TPS6105X_H
+#define MFD_TPS6105X_H
+
+#include <linux/i2c.h>
+#include <linux/regulator/machine.h>
+
+/*
+ * Register definitions to all subdrivers
+ */
+#define TPS6105X_REG_0			0x00
+#define TPS6105X_REG0_MODE_SHIFT	6
+#define TPS6105X_REG0_MODE_MASK		(0x03<<6)
+/* These defines for both reg0 and reg1 */
+#define TPS6105X_REG0_MODE_SHUTDOWN	0x00
+#define TPS6105X_REG0_MODE_TORCH	0x01
+#define TPS6105X_REG0_MODE_TORCH_FLASH	0x02
+#define TPS6105X_REG0_MODE_VOLTAGE	0x03
+#define TPS6105X_REG0_VOLTAGE_SHIFT	4
+#define TPS6105X_REG0_VOLTAGE_MASK	(3<<4)
+#define TPS6105X_REG0_VOLTAGE_450	0
+#define TPS6105X_REG0_VOLTAGE_500	1
+#define TPS6105X_REG0_VOLTAGE_525	2
+#define TPS6105X_REG0_VOLTAGE_500_2	3
+#define TPS6105X_REG0_DIMMING_SHIFT	3
+#define TPS6105X_REG0_TORCHC_SHIFT	0
+#define TPS6105X_REG0_TORCHC_MASK	(7<<0)
+#define TPS6105X_REG0_TORCHC_0		0x00
+#define TPS6105X_REG0_TORCHC_50		0x01
+#define TPS6105X_REG0_TORCHC_75		0x02
+#define TPS6105X_REG0_TORCHC_100	0x03
+#define TPS6105X_REG0_TORCHC_150	0x04
+#define TPS6105X_REG0_TORCHC_200	0x05
+#define TPS6105X_REG0_TORCHC_250_400	0x06
+#define TPS6105X_REG0_TORCHC_250_500	0x07
+#define TPS6105X_REG_1			0x01
+#define TPS6105X_REG1_MODE_SHIFT	6
+#define TPS6105X_REG1_MODE_MASK		(0x03<<6)
+#define TPS6105X_REG1_MODE_SHUTDOWN	0x00
+#define TPS6105X_REG1_MODE_TORCH	0x01
+#define TPS6105X_REG1_MODE_TORCH_FLASH	0x02
+#define TPS6105X_REG1_MODE_VOLTAGE	0x03
+#define TPS6105X_REG_2			0x02
+#define TPS6105X_REG_3			0x03
+
+/**
+ * enum tps6105x_mode - desired mode for the TPS6105x
+ * @TPS6105X_MODE_SHUTDOWN: this instance is inactive, not used for anything
+ * @TPS61905X_MODE_TORCH: this instance is used as a LED, usually a while
+ *	LED, for example as backlight or flashlight. If this is set, the
+ *	TPS6105X will register to the LED framework
+ * @TPS6105X_MODE_TORCH_FLASH: this instance is used as a flashgun, usually
+ *	in a camera
+ * @TPS6105X_MODE_VOLTAGE: this instance is used as a voltage regulator and
+ *	will register to the regulator framework
+ */
+enum tps6105x_mode {
+	TPS6105X_MODE_SHUTDOWN,
+	TPS6105X_MODE_TORCH,
+	TPS6105X_MODE_TORCH_FLASH,
+	TPS6105X_MODE_VOLTAGE,
+};
+
+/**
+ * struct tps6105x_platform_data - TPS61905x platform data
+ * @mode: what mode this instance shall be operated in,
+ *	this is not selectable at runtime
+ * @regulator_data: initialization data for the voltage
+ *	regulator if used as a voltage source
+ */
+struct tps6105x_platform_data {
+	enum tps6105x_mode mode;
+	struct regulator_init_data *regulator_data;
+};
+
+/**
+ * struct tps6105x - state holder for the TPS6105x drivers
+ * @mutex: mutex to serialize I2C accesses
+ * @i2c_client: corresponding I2C client
+ * @regulator: regulator device if used in voltage mode
+ */
+struct tps6105x {
+	struct tps6105x_platform_data *pdata;
+	struct mutex		lock;
+	struct i2c_client	*client;
+	struct regulator_dev	*regulator;
+};
+
+extern int tps6105x_set(struct tps6105x *tps6105x, u8 reg, u8 value);
+extern int tps6105x_get(struct tps6105x *tps6105x, u8 reg, u8 *buf);
+extern int tps6105x_mask_and_set(struct tps6105x *tps6105x, u8 reg,
+				 u8 bitmask, u8 bitvalues);
+
+#endif
diff --git a/include/linux/mfd/tps6507x.h b/include/linux/mfd/tps6507x.h
new file mode 100644
index 00000000..c923e486
--- /dev/null
+++ b/include/linux/mfd/tps6507x.h
@@ -0,0 +1,169 @@
+/* linux/mfd/tps6507x.h
+ *
+ * Functions to access TPS65070 power management chip.
+ *
+ * Copyright (c) 2009 RidgeRun (todd.fischer@ridgerun.com)
+ *
+ *
+ *  For licencing details see kernel-base/COPYING
+ */
+
+#ifndef __LINUX_MFD_TPS6507X_H
+#define __LINUX_MFD_TPS6507X_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Registers, all 8 bits
+ * ----------------------------------------------------------------------------
+ */
+
+
+/* Register definitions */
+#define	TPS6507X_REG_PPATH1			0X01
+#define	TPS6507X_CHG_USB			BIT(7)
+#define	TPS6507X_CHG_AC				BIT(6)
+#define	TPS6507X_CHG_USB_PW_ENABLE		BIT(5)
+#define	TPS6507X_CHG_AC_PW_ENABLE		BIT(4)
+#define	TPS6507X_CHG_AC_CURRENT			BIT(2)
+#define	TPS6507X_CHG_USB_CURRENT		BIT(0)
+
+#define	TPS6507X_REG_INT			0X02
+#define	TPS6507X_REG_MASK_AC_USB		BIT(7)
+#define	TPS6507X_REG_MASK_TSC			BIT(6)
+#define	TPS6507X_REG_MASK_PB_IN			BIT(5)
+#define	TPS6507X_REG_TSC_INT			BIT(3)
+#define	TPS6507X_REG_PB_IN_INT			BIT(2)
+#define	TPS6507X_REG_AC_USB_APPLIED		BIT(1)
+#define	TPS6507X_REG_AC_USB_REMOVED		BIT(0)
+
+#define	TPS6507X_REG_CHGCONFIG0			0X03
+
+#define	TPS6507X_REG_CHGCONFIG1			0X04
+#define	TPS6507X_CON_CTRL1_DCDC1_ENABLE		BIT(4)
+#define	TPS6507X_CON_CTRL1_DCDC2_ENABLE		BIT(3)
+#define	TPS6507X_CON_CTRL1_DCDC3_ENABLE		BIT(2)
+#define	TPS6507X_CON_CTRL1_LDO1_ENABLE		BIT(1)
+#define	TPS6507X_CON_CTRL1_LDO2_ENABLE		BIT(0)
+
+#define	TPS6507X_REG_CHGCONFIG2			0X05
+
+#define	TPS6507X_REG_CHGCONFIG3			0X06
+
+#define	TPS6507X_REG_ADCONFIG			0X07
+#define	TPS6507X_ADCONFIG_AD_ENABLE		BIT(7)
+#define	TPS6507X_ADCONFIG_START_CONVERSION	BIT(6)
+#define	TPS6507X_ADCONFIG_CONVERSION_DONE	BIT(5)
+#define	TPS6507X_ADCONFIG_VREF_ENABLE		BIT(4)
+#define	TPS6507X_ADCONFIG_INPUT_AD_IN1		0
+#define	TPS6507X_ADCONFIG_INPUT_AD_IN2		1
+#define	TPS6507X_ADCONFIG_INPUT_AD_IN3		2
+#define	TPS6507X_ADCONFIG_INPUT_AD_IN4		3
+#define	TPS6507X_ADCONFIG_INPUT_TS_PIN		4
+#define	TPS6507X_ADCONFIG_INPUT_BAT_CURRENT	5
+#define	TPS6507X_ADCONFIG_INPUT_AC_VOLTAGE	6
+#define	TPS6507X_ADCONFIG_INPUT_SYS_VOLTAGE	7
+#define	TPS6507X_ADCONFIG_INPUT_CHARGER_VOLTAGE 8
+#define	TPS6507X_ADCONFIG_INPUT_BAT_VOLTAGE	9
+#define	TPS6507X_ADCONFIG_INPUT_THRESHOLD_VOLTAGE 10
+#define	TPS6507X_ADCONFIG_INPUT_ISET1_VOLTAGE	11
+#define	TPS6507X_ADCONFIG_INPUT_ISET2_VOLTAGE	12
+#define	TPS6507X_ADCONFIG_INPUT_REAL_TSC	14
+#define	TPS6507X_ADCONFIG_INPUT_TSC		15
+
+#define	TPS6507X_REG_TSCMODE			0X08
+#define	TPS6507X_TSCMODE_X_POSITION		0
+#define	TPS6507X_TSCMODE_Y_POSITION		1
+#define	TPS6507X_TSCMODE_PRESSURE		2
+#define	TPS6507X_TSCMODE_X_PLATE		3
+#define	TPS6507X_TSCMODE_Y_PLATE		4
+#define	TPS6507X_TSCMODE_STANDBY		5
+#define	TPS6507X_TSCMODE_ADC_INPUT		6
+#define	TPS6507X_TSCMODE_DISABLE		7
+
+#define	TPS6507X_REG_ADRESULT_1			0X09
+
+#define	TPS6507X_REG_ADRESULT_2			0X0A
+#define	TPS6507X_REG_ADRESULT_2_MASK		(BIT(1) | BIT(0))
+
+#define	TPS6507X_REG_PGOOD			0X0B
+
+#define	TPS6507X_REG_PGOODMASK			0X0C
+
+#define	TPS6507X_REG_CON_CTRL1			0X0D
+#define	TPS6507X_CON_CTRL1_DCDC1_ENABLE		BIT(4)
+#define	TPS6507X_CON_CTRL1_DCDC2_ENABLE		BIT(3)
+#define	TPS6507X_CON_CTRL1_DCDC3_ENABLE		BIT(2)
+#define	TPS6507X_CON_CTRL1_LDO1_ENABLE		BIT(1)
+#define	TPS6507X_CON_CTRL1_LDO2_ENABLE		BIT(0)
+
+#define	TPS6507X_REG_CON_CTRL2			0X0E
+
+#define	TPS6507X_REG_CON_CTRL3			0X0F
+
+#define	TPS6507X_REG_DEFDCDC1			0X10
+#define TPS6507X_DEFDCDC1_DCDC1_EXT_ADJ_EN	BIT(7)
+#define TPS6507X_DEFDCDC1_DCDC1_MASK		0X3F
+
+#define	TPS6507X_REG_DEFDCDC2_LOW		0X11
+#define TPS6507X_DEFDCDC2_LOW_DCDC2_MASK	0X3F
+
+#define	TPS6507X_REG_DEFDCDC2_HIGH		0X12
+#define TPS6507X_DEFDCDC2_HIGH_DCDC2_MASK	0X3F
+
+#define	TPS6507X_REG_DEFDCDC3_LOW		0X13
+#define TPS6507X_DEFDCDC3_LOW_DCDC3_MASK	0X3F
+
+#define	TPS6507X_REG_DEFDCDC3_HIGH		0X14
+#define TPS6507X_DEFDCDC3_HIGH_DCDC3_MASK	0X3F
+
+#define	TPS6507X_REG_DEFSLEW			0X15
+
+#define	TPS6507X_REG_LDO_CTRL1			0X16
+#define TPS6507X_REG_LDO_CTRL1_LDO1_MASK	0X0F
+
+#define	TPS6507X_REG_DEFLDO2			0X17
+#define TPS6507X_REG_DEFLDO2_LDO2_MASK		0X3F
+
+#define	TPS6507X_REG_WLED_CTRL1			0X18
+
+#define	TPS6507X_REG_WLED_CTRL2			0X19
+
+/* VDCDC MASK */
+#define TPS6507X_DEFDCDCX_DCDC_MASK		0X3F
+
+#define TPS6507X_MAX_REGISTER			0X19
+
+/**
+ * struct tps6507x_board - packages regulator and touchscreen init data
+ * @tps6507x_regulator_data: regulator initialization values
+ *
+ * Board data may be used to initialize regulator and touchscreen.
+ */
+
+struct tps6507x_board {
+	struct regulator_init_data *tps6507x_pmic_init_data;
+	struct touchscreen_init_data *tps6507x_ts_init_data;
+};
+
+/**
+ * struct tps6507x_dev - tps6507x sub-driver chip access routines
+ * @read_dev() - I2C register read function
+ * @write_dev() - I2C register write function
+ *
+ * Device data may be used to access the TPS6507x chip
+ */
+
+struct tps6507x_dev {
+	struct device *dev;
+	struct i2c_client *i2c_client;
+	int (*read_dev)(struct tps6507x_dev *tps6507x, char reg, int size,
+			void *dest);
+	int (*write_dev)(struct tps6507x_dev *tps6507x, char reg, int size,
+			 void *src);
+
+	/* Client devices */
+	struct tps6507x_pmic *pmic;
+	struct tps6507x_ts *ts;
+};
+
+#endif /*  __LINUX_MFD_TPS6507X_H */
diff --git a/include/linux/mfd/tps65090.h b/include/linux/mfd/tps65090.h
new file mode 100644
index 00000000..38e31c55
--- /dev/null
+++ b/include/linux/mfd/tps65090.h
@@ -0,0 +1,46 @@
+/*
+ * Core driver interface for TI TPS65090 PMIC family
+ *
+ * Copyright (C) 2012 NVIDIA Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ */
+
+#ifndef __LINUX_MFD_TPS65090_H
+#define __LINUX_MFD_TPS65090_H
+
+struct tps65090_subdev_info {
+	int		id;
+	const char	*name;
+	void		*platform_data;
+};
+
+struct tps65090_platform_data {
+	int irq_base;
+	int num_subdevs;
+	struct tps65090_subdev_info *subdevs;
+};
+
+/*
+ * NOTE: the functions below are not intended for use outside
+ * of the TPS65090 sub-device drivers
+ */
+extern int tps65090_write(struct device *dev, int reg, uint8_t val);
+extern int tps65090_read(struct device *dev, int reg, uint8_t *val);
+extern int tps65090_set_bits(struct device *dev, int reg, uint8_t bit_num);
+extern int tps65090_clr_bits(struct device *dev, int reg, uint8_t bit_num);
+
+#endif /*__LINUX_MFD_TPS65090_H */
diff --git a/include/linux/mfd/tps65217.h b/include/linux/mfd/tps65217.h
new file mode 100644
index 00000000..e030ef9a
--- /dev/null
+++ b/include/linux/mfd/tps65217.h
@@ -0,0 +1,283 @@
+/*
+ * linux/mfd/tps65217.h
+ *
+ * Functions to access TPS65217 power management chip.
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_MFD_TPS65217_H
+#define __LINUX_MFD_TPS65217_H
+
+#include <linux/i2c.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+/* I2C ID for TPS65217 part */
+#define TPS65217_I2C_ID			0x24
+
+/* All register addresses */
+#define TPS65217_REG_CHIPID		0X00
+#define TPS65217_REG_PPATH		0X01
+#define TPS65217_REG_INT		0X02
+#define TPS65217_REG_CHGCONFIG0		0X03
+#define TPS65217_REG_CHGCONFIG1		0X04
+#define TPS65217_REG_CHGCONFIG2		0X05
+#define TPS65217_REG_CHGCONFIG3		0X06
+#define TPS65217_REG_WLEDCTRL1		0X07
+#define TPS65217_REG_WLEDCTRL2		0X08
+#define TPS65217_REG_MUXCTRL		0X09
+#define TPS65217_REG_STATUS		0X0A
+#define TPS65217_REG_PASSWORD		0X0B
+#define TPS65217_REG_PGOOD		0X0C
+#define TPS65217_REG_DEFPG		0X0D
+#define TPS65217_REG_DEFDCDC1		0X0E
+#define TPS65217_REG_DEFDCDC2		0X0F
+#define TPS65217_REG_DEFDCDC3		0X10
+#define TPS65217_REG_DEFSLEW		0X11
+#define TPS65217_REG_DEFLDO1		0X12
+#define TPS65217_REG_DEFLDO2		0X13
+#define TPS65217_REG_DEFLS1		0X14
+#define TPS65217_REG_DEFLS2		0X15
+#define TPS65217_REG_ENABLE		0X16
+#define TPS65217_REG_DEFUVLO		0X18
+#define TPS65217_REG_SEQ1		0X19
+#define TPS65217_REG_SEQ2		0X1A
+#define TPS65217_REG_SEQ3		0X1B
+#define TPS65217_REG_SEQ4		0X1C
+#define TPS65217_REG_SEQ5		0X1D
+#define TPS65217_REG_SEQ6		0X1E
+
+/* Register field definitions */
+#define TPS65217_CHIPID_CHIP_MASK	0xF0
+#define TPS65217_CHIPID_REV_MASK	0x0F
+
+#define TPS65217_PPATH_ACSINK_ENABLE	BIT(7)
+#define TPS65217_PPATH_USBSINK_ENABLE	BIT(6)
+#define TPS65217_PPATH_AC_PW_ENABLE	BIT(5)
+#define TPS65217_PPATH_USB_PW_ENABLE	BIT(4)
+#define TPS65217_PPATH_AC_CURRENT_MASK	0x0C
+#define TPS65217_PPATH_USB_CURRENT_MASK	0x03
+
+#define TPS65217_INT_PBM		BIT(6)
+#define TPS65217_INT_ACM		BIT(5)
+#define TPS65217_INT_USBM		BIT(4)
+#define TPS65217_INT_PBI		BIT(2)
+#define TPS65217_INT_ACI		BIT(1)
+#define TPS65217_INT_USBI		BIT(0)
+
+#define TPS65217_CHGCONFIG0_TREG	BIT(7)
+#define TPS65217_CHGCONFIG0_DPPM	BIT(6)
+#define TPS65217_CHGCONFIG0_TSUSP	BIT(5)
+#define TPS65217_CHGCONFIG0_TERMI	BIT(4)
+#define TPS65217_CHGCONFIG0_ACTIVE	BIT(3)
+#define TPS65217_CHGCONFIG0_CHGTOUT	BIT(2)
+#define TPS65217_CHGCONFIG0_PCHGTOUT	BIT(1)
+#define TPS65217_CHGCONFIG0_BATTEMP	BIT(0)
+
+#define TPS65217_CHGCONFIG1_TMR_MASK	0xC0
+#define TPS65217_CHGCONFIG1_TMR_ENABLE	BIT(5)
+#define TPS65217_CHGCONFIG1_NTC_TYPE	BIT(4)
+#define TPS65217_CHGCONFIG1_RESET	BIT(3)
+#define TPS65217_CHGCONFIG1_TERM	BIT(2)
+#define TPS65217_CHGCONFIG1_SUSP	BIT(1)
+#define TPS65217_CHGCONFIG1_CHG_EN	BIT(0)
+
+#define TPS65217_CHGCONFIG2_DYNTMR	BIT(7)
+#define TPS65217_CHGCONFIG2_VPREGHG	BIT(6)
+#define TPS65217_CHGCONFIG2_VOREG_MASK	0x30
+
+#define TPS65217_CHGCONFIG3_ICHRG_MASK	0xC0
+#define TPS65217_CHGCONFIG3_DPPMTH_MASK	0x30
+#define TPS65217_CHGCONFIG2_PCHRGT	BIT(3)
+#define TPS65217_CHGCONFIG2_TERMIF	0x06
+#define TPS65217_CHGCONFIG2_TRANGE	BIT(0)
+
+#define TPS65217_WLEDCTRL1_ISINK_ENABLE	BIT(3)
+#define TPS65217_WLEDCTRL1_ISEL		BIT(2)
+#define TPS65217_WLEDCTRL1_FDIM_MASK	0x03
+
+#define TPS65217_WLEDCTRL2_DUTY_MASK	0x7F
+
+#define TPS65217_MUXCTRL_MUX_MASK	0x07
+
+#define TPS65217_STATUS_OFF		BIT(7)
+#define TPS65217_STATUS_ACPWR		BIT(3)
+#define TPS65217_STATUS_USBPWR		BIT(2)
+#define TPS65217_STATUS_PB		BIT(0)
+
+#define TPS65217_PASSWORD_REGS_UNLOCK	0x7D
+
+#define TPS65217_PGOOD_LDO3_PG		BIT(6)
+#define TPS65217_PGOOD_LDO4_PG		BIT(5)
+#define TPS65217_PGOOD_DC1_PG		BIT(4)
+#define TPS65217_PGOOD_DC2_PG		BIT(3)
+#define TPS65217_PGOOD_DC3_PG		BIT(2)
+#define TPS65217_PGOOD_LDO1_PG		BIT(1)
+#define TPS65217_PGOOD_LDO2_PG		BIT(0)
+
+#define TPS65217_DEFPG_LDO1PGM		BIT(3)
+#define TPS65217_DEFPG_LDO2PGM		BIT(2)
+#define TPS65217_DEFPG_PGDLY_MASK	0x03
+
+#define TPS65217_DEFDCDCX_XADJX		BIT(7)
+#define TPS65217_DEFDCDCX_DCDC_MASK	0x3F
+
+#define TPS65217_DEFSLEW_GO		BIT(7)
+#define TPS65217_DEFSLEW_GODSBL		BIT(6)
+#define TPS65217_DEFSLEW_PFM_EN1	BIT(5)
+#define TPS65217_DEFSLEW_PFM_EN2	BIT(4)
+#define TPS65217_DEFSLEW_PFM_EN3	BIT(3)
+#define TPS65217_DEFSLEW_SLEW_MASK	0x07
+
+#define TPS65217_DEFLDO1_LDO1_MASK	0x0F
+
+#define TPS65217_DEFLDO2_TRACK		BIT(6)
+#define TPS65217_DEFLDO2_LDO2_MASK	0x3F
+
+#define TPS65217_DEFLDO3_LDO3_EN	BIT(5)
+#define TPS65217_DEFLDO3_LDO3_MASK	0x1F
+
+#define TPS65217_DEFLDO4_LDO4_EN	BIT(5)
+#define TPS65217_DEFLDO4_LDO4_MASK	0x1F
+
+#define TPS65217_ENABLE_LS1_EN		BIT(6)
+#define TPS65217_ENABLE_LS2_EN		BIT(5)
+#define TPS65217_ENABLE_DC1_EN		BIT(4)
+#define TPS65217_ENABLE_DC2_EN		BIT(3)
+#define TPS65217_ENABLE_DC3_EN		BIT(2)
+#define TPS65217_ENABLE_LDO1_EN		BIT(1)
+#define TPS65217_ENABLE_LDO2_EN		BIT(0)
+
+#define TPS65217_DEFUVLO_UVLOHYS	BIT(2)
+#define TPS65217_DEFUVLO_UVLO_MASK	0x03
+
+#define TPS65217_SEQ1_DC1_SEQ_MASK	0xF0
+#define TPS65217_SEQ1_DC2_SEQ_MASK	0x0F
+
+#define TPS65217_SEQ2_DC3_SEQ_MASK	0xF0
+#define TPS65217_SEQ2_LDO1_SEQ_MASK	0x0F
+
+#define TPS65217_SEQ3_LDO2_SEQ_MASK	0xF0
+#define TPS65217_SEQ3_LDO3_SEQ_MASK	0x0F
+
+#define TPS65217_SEQ4_LDO4_SEQ_MASK	0xF0
+
+#define TPS65217_SEQ5_DLY1_MASK		0xC0
+#define TPS65217_SEQ5_DLY2_MASK		0x30
+#define TPS65217_SEQ5_DLY3_MASK		0x0C
+#define TPS65217_SEQ5_DLY4_MASK		0x03
+
+#define TPS65217_SEQ6_DLY5_MASK		0xC0
+#define TPS65217_SEQ6_DLY6_MASK		0x30
+#define TPS65217_SEQ6_SEQUP		BIT(2)
+#define TPS65217_SEQ6_SEQDWN		BIT(1)
+#define TPS65217_SEQ6_INSTDWN		BIT(0)
+
+#define TPS65217_MAX_REGISTER		0x1E
+#define TPS65217_PROTECT_NONE		0
+#define TPS65217_PROTECT_L1		1
+#define TPS65217_PROTECT_L2		2
+
+
+enum tps65217_regulator_id {
+	/* DCDC's */
+	TPS65217_DCDC_1,
+	TPS65217_DCDC_2,
+	TPS65217_DCDC_3,
+	/* LDOs */
+	TPS65217_LDO_1,
+	TPS65217_LDO_2,
+	TPS65217_LDO_3,
+	TPS65217_LDO_4,
+};
+
+#define TPS65217_MAX_REG_ID		TPS65217_LDO_4
+
+/* Number of step-down converters available */
+#define TPS65217_NUM_DCDC		3
+/* Number of LDO voltage regulators available */
+#define TPS65217_NUM_LDO		4
+/* Number of total regulators available */
+#define TPS65217_NUM_REGULATOR		(TPS65217_NUM_DCDC + TPS65217_NUM_LDO)
+
+/**
+ * struct tps65217_board - packages regulator init data
+ * @tps65217_regulator_data: regulator initialization values
+ *
+ * Board data may be used to initialize regulator.
+ */
+struct tps65217_board {
+	struct regulator_init_data *tps65217_init_data;
+};
+
+/**
+ * struct tps_info - packages regulator constraints
+ * @name:		Voltage regulator name
+ * @min_uV:		minimum micro volts
+ * @max_uV:		minimum micro volts
+ * @vsel_to_uv:		Function pointer to get voltage from selector
+ * @uv_to_vsel:		Function pointer to get selector from voltage
+ * @table:		Table for non-uniform voltage step-size
+ * @table_len:		Length of the voltage table
+ * @enable_mask:	Regulator enable mask bits
+ * @set_vout_reg:	Regulator output voltage set register
+ * @set_vout_mask:	Regulator output voltage set mask
+ *
+ * This data is used to check the regualtor voltage limits while setting.
+ */
+struct tps_info {
+	const char *name;
+	int min_uV;
+	int max_uV;
+	int (*vsel_to_uv)(unsigned int vsel);
+	int (*uv_to_vsel)(int uV, unsigned int *vsel);
+	const int *table;
+	unsigned int table_len;
+	unsigned int enable_mask;
+	unsigned int set_vout_reg;
+	unsigned int set_vout_mask;
+};
+
+/**
+ * struct tps65217 - tps65217 sub-driver chip access routines
+ *
+ * Device data may be used to access the TPS65217 chip
+ */
+
+struct tps65217 {
+	struct device *dev;
+	struct tps65217_board *pdata;
+	struct regulator_desc desc[TPS65217_NUM_REGULATOR];
+	struct regulator_dev *rdev[TPS65217_NUM_REGULATOR];
+	struct tps_info *info[TPS65217_NUM_REGULATOR];
+	struct regmap *regmap;
+
+	/* Client devices */
+	struct platform_device *regulator_pdev[TPS65217_NUM_REGULATOR];
+};
+
+static inline struct tps65217 *dev_to_tps65217(struct device *dev)
+{
+	return dev_get_drvdata(dev);
+}
+
+int tps65217_reg_read(struct tps65217 *tps, unsigned int reg,
+					unsigned int *val);
+int tps65217_reg_write(struct tps65217 *tps, unsigned int reg,
+			unsigned int val, unsigned int level);
+int tps65217_set_bits(struct tps65217 *tps, unsigned int reg,
+		unsigned int mask, unsigned int val, unsigned int level);
+int tps65217_clear_bits(struct tps65217 *tps, unsigned int reg,
+		unsigned int mask, unsigned int level);
+
+#endif /*  __LINUX_MFD_TPS65217_H */
diff --git a/include/linux/mfd/tps6586x.h b/include/linux/mfd/tps6586x.h
new file mode 100644
index 00000000..b19176ea
--- /dev/null
+++ b/include/linux/mfd/tps6586x.h
@@ -0,0 +1,94 @@
+#ifndef __LINUX_MFD_TPS6586X_H
+#define __LINUX_MFD_TPS6586X_H
+
+#define TPS6586X_SLEW_RATE_INSTANTLY	0x00
+#define TPS6586X_SLEW_RATE_110UV	0x01
+#define TPS6586X_SLEW_RATE_220UV	0x02
+#define TPS6586X_SLEW_RATE_440UV	0x03
+#define TPS6586X_SLEW_RATE_880UV	0x04
+#define TPS6586X_SLEW_RATE_1760UV	0x05
+#define TPS6586X_SLEW_RATE_3520UV	0x06
+#define TPS6586X_SLEW_RATE_7040UV	0x07
+
+#define TPS6586X_SLEW_RATE_SET		0x08
+#define TPS6586X_SLEW_RATE_MASK         0x07
+
+enum {
+	TPS6586X_ID_SM_0,
+	TPS6586X_ID_SM_1,
+	TPS6586X_ID_SM_2,
+	TPS6586X_ID_LDO_0,
+	TPS6586X_ID_LDO_1,
+	TPS6586X_ID_LDO_2,
+	TPS6586X_ID_LDO_3,
+	TPS6586X_ID_LDO_4,
+	TPS6586X_ID_LDO_5,
+	TPS6586X_ID_LDO_6,
+	TPS6586X_ID_LDO_7,
+	TPS6586X_ID_LDO_8,
+	TPS6586X_ID_LDO_9,
+	TPS6586X_ID_LDO_RTC,
+};
+
+enum {
+	TPS6586X_INT_PLDO_0,
+	TPS6586X_INT_PLDO_1,
+	TPS6586X_INT_PLDO_2,
+	TPS6586X_INT_PLDO_3,
+	TPS6586X_INT_PLDO_4,
+	TPS6586X_INT_PLDO_5,
+	TPS6586X_INT_PLDO_6,
+	TPS6586X_INT_PLDO_7,
+	TPS6586X_INT_COMP_DET,
+	TPS6586X_INT_ADC,
+	TPS6586X_INT_PLDO_8,
+	TPS6586X_INT_PLDO_9,
+	TPS6586X_INT_PSM_0,
+	TPS6586X_INT_PSM_1,
+	TPS6586X_INT_PSM_2,
+	TPS6586X_INT_PSM_3,
+	TPS6586X_INT_RTC_ALM1,
+	TPS6586X_INT_ACUSB_OVP,
+	TPS6586X_INT_USB_DET,
+	TPS6586X_INT_AC_DET,
+	TPS6586X_INT_BAT_DET,
+	TPS6586X_INT_CHG_STAT,
+	TPS6586X_INT_CHG_TEMP,
+	TPS6586X_INT_PP,
+	TPS6586X_INT_RESUME,
+	TPS6586X_INT_LOW_SYS,
+	TPS6586X_INT_RTC_ALM2,
+};
+
+struct tps6586x_settings {
+	int slew_rate;
+};
+
+struct tps6586x_subdev_info {
+	int		id;
+	const char	*name;
+	void		*platform_data;
+};
+
+struct tps6586x_platform_data {
+	int num_subdevs;
+	struct tps6586x_subdev_info *subdevs;
+
+	int gpio_base;
+	int irq_base;
+};
+
+/*
+ * NOTE: the functions below are not intended for use outside
+ * of the TPS6586X sub-device drivers
+ */
+extern int tps6586x_write(struct device *dev, int reg, uint8_t val);
+extern int tps6586x_writes(struct device *dev, int reg, int len, uint8_t *val);
+extern int tps6586x_read(struct device *dev, int reg, uint8_t *val);
+extern int tps6586x_reads(struct device *dev, int reg, int len, uint8_t *val);
+extern int tps6586x_set_bits(struct device *dev, int reg, uint8_t bit_mask);
+extern int tps6586x_clr_bits(struct device *dev, int reg, uint8_t bit_mask);
+extern int tps6586x_update(struct device *dev, int reg, uint8_t val,
+			   uint8_t mask);
+
+#endif /*__LINUX_MFD_TPS6586X_H */
diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h
new file mode 100644
index 00000000..1c6c2860
--- /dev/null
+++ b/include/linux/mfd/tps65910.h
@@ -0,0 +1,848 @@
+/*
+ * tps65910.h  --  TI TPS6591x
+ *
+ * Copyright 2010-2011 Texas Instruments Inc.
+ *
+ * Author: Graeme Gregory <gg@slimlogic.co.uk>
+ * Author: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk>
+ * Author: Arnaud Deconinck <a-deconinck@ti.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __LINUX_MFD_TPS65910_H
+#define __LINUX_MFD_TPS65910_H
+
+#include <linux/gpio.h>
+
+/* TPS chip id list */
+#define TPS65910			0
+#define TPS65911			1
+
+/* TPS regulator type list */
+#define REGULATOR_LDO			0
+#define REGULATOR_DCDC			1
+
+/*
+ * List of registers for component TPS65910
+ *
+ */
+
+#define TPS65910_SECONDS				0x0
+#define TPS65910_MINUTES				0x1
+#define TPS65910_HOURS					0x2
+#define TPS65910_DAYS					0x3
+#define TPS65910_MONTHS					0x4
+#define TPS65910_YEARS					0x5
+#define TPS65910_WEEKS					0x6
+#define TPS65910_ALARM_SECONDS				0x8
+#define TPS65910_ALARM_MINUTES				0x9
+#define TPS65910_ALARM_HOURS				0xA
+#define TPS65910_ALARM_DAYS				0xB
+#define TPS65910_ALARM_MONTHS				0xC
+#define TPS65910_ALARM_YEARS				0xD
+#define TPS65910_RTC_CTRL				0x10
+#define TPS65910_RTC_STATUS				0x11
+#define TPS65910_RTC_INTERRUPTS				0x12
+#define TPS65910_RTC_COMP_LSB				0x13
+#define TPS65910_RTC_COMP_MSB				0x14
+#define TPS65910_RTC_RES_PROG				0x15
+#define TPS65910_RTC_RESET_STATUS			0x16
+#define TPS65910_BCK1					0x17
+#define TPS65910_BCK2					0x18
+#define TPS65910_BCK3					0x19
+#define TPS65910_BCK4					0x1A
+#define TPS65910_BCK5					0x1B
+#define TPS65910_PUADEN					0x1C
+#define TPS65910_REF					0x1D
+#define TPS65910_VRTC					0x1E
+#define TPS65910_VIO					0x20
+#define TPS65910_VDD1					0x21
+#define TPS65910_VDD1_OP				0x22
+#define TPS65910_VDD1_SR				0x23
+#define TPS65910_VDD2					0x24
+#define TPS65910_VDD2_OP				0x25
+#define TPS65910_VDD2_SR				0x26
+#define TPS65910_VDD3					0x27
+#define TPS65910_VDIG1					0x30
+#define TPS65910_VDIG2					0x31
+#define TPS65910_VAUX1					0x32
+#define TPS65910_VAUX2					0x33
+#define TPS65910_VAUX33					0x34
+#define TPS65910_VMMC					0x35
+#define TPS65910_VPLL					0x36
+#define TPS65910_VDAC					0x37
+#define TPS65910_THERM					0x38
+#define TPS65910_BBCH					0x39
+#define TPS65910_DCDCCTRL				0x3E
+#define TPS65910_DEVCTRL				0x3F
+#define TPS65910_DEVCTRL2				0x40
+#define TPS65910_SLEEP_KEEP_LDO_ON			0x41
+#define TPS65910_SLEEP_KEEP_RES_ON			0x42
+#define TPS65910_SLEEP_SET_LDO_OFF			0x43
+#define TPS65910_SLEEP_SET_RES_OFF			0x44
+#define TPS65910_EN1_LDO_ASS				0x45
+#define TPS65910_EN1_SMPS_ASS				0x46
+#define TPS65910_EN2_LDO_ASS				0x47
+#define TPS65910_EN2_SMPS_ASS				0x48
+#define TPS65910_EN3_LDO_ASS				0x49
+#define TPS65910_SPARE					0x4A
+#define TPS65910_INT_STS				0x50
+#define TPS65910_INT_MSK				0x51
+#define TPS65910_INT_STS2				0x52
+#define TPS65910_INT_MSK2				0x53
+#define TPS65910_INT_STS3				0x54
+#define TPS65910_INT_MSK3				0x55
+#define TPS65910_GPIO0					0x60
+#define TPS65910_GPIO1					0x61
+#define TPS65910_GPIO2					0x62
+#define TPS65910_GPIO3					0x63
+#define TPS65910_GPIO4					0x64
+#define TPS65910_GPIO5					0x65
+#define TPS65910_GPIO6					0x66
+#define TPS65910_GPIO7					0x67
+#define TPS65910_GPIO8					0x68
+#define TPS65910_JTAGVERNUM				0x80
+#define TPS65910_MAX_REGISTER				0x80
+
+/*
+ * List of registers specific to TPS65911
+ */
+#define TPS65911_VDDCTRL				0x27
+#define TPS65911_VDDCTRL_OP				0x28
+#define TPS65911_VDDCTRL_SR				0x29
+#define TPS65911_LDO1					0x30
+#define TPS65911_LDO2					0x31
+#define TPS65911_LDO5					0x32
+#define TPS65911_LDO8					0x33
+#define TPS65911_LDO7					0x34
+#define TPS65911_LDO6					0x35
+#define TPS65911_LDO4					0x36
+#define TPS65911_LDO3					0x37
+#define TPS65911_VMBCH					0x6A
+#define TPS65911_VMBCH2					0x6B
+
+/*
+ * List of register bitfields for component TPS65910
+ *
+ */
+
+
+/*Register BCK1  (0x80) register.RegisterDescription */
+#define BCK1_BCKUP_MASK					0xFF
+#define BCK1_BCKUP_SHIFT				0
+
+
+/*Register BCK2  (0x80) register.RegisterDescription */
+#define BCK2_BCKUP_MASK					0xFF
+#define BCK2_BCKUP_SHIFT				0
+
+
+/*Register BCK3  (0x80) register.RegisterDescription */
+#define BCK3_BCKUP_MASK					0xFF
+#define BCK3_BCKUP_SHIFT				0
+
+
+/*Register BCK4  (0x80) register.RegisterDescription */
+#define BCK4_BCKUP_MASK					0xFF
+#define BCK4_BCKUP_SHIFT				0
+
+
+/*Register BCK5  (0x80) register.RegisterDescription */
+#define BCK5_BCKUP_MASK					0xFF
+#define BCK5_BCKUP_SHIFT				0
+
+
+/*Register PUADEN  (0x80) register.RegisterDescription */
+#define PUADEN_EN3P_MASK				0x80
+#define PUADEN_EN3P_SHIFT				7
+#define PUADEN_I2CCTLP_MASK				0x40
+#define PUADEN_I2CCTLP_SHIFT				6
+#define PUADEN_I2CSRP_MASK				0x20
+#define PUADEN_I2CSRP_SHIFT				5
+#define PUADEN_PWRONP_MASK				0x10
+#define PUADEN_PWRONP_SHIFT				4
+#define PUADEN_SLEEPP_MASK				0x08
+#define PUADEN_SLEEPP_SHIFT				3
+#define PUADEN_PWRHOLDP_MASK				0x04
+#define PUADEN_PWRHOLDP_SHIFT				2
+#define PUADEN_BOOT1P_MASK				0x02
+#define PUADEN_BOOT1P_SHIFT				1
+#define PUADEN_BOOT0P_MASK				0x01
+#define PUADEN_BOOT0P_SHIFT				0
+
+
+/*Register REF	(0x80) register.RegisterDescription */
+#define REF_VMBCH_SEL_MASK				0x0C
+#define REF_VMBCH_SEL_SHIFT				2
+#define REF_ST_MASK					0x03
+#define REF_ST_SHIFT					0
+
+
+/*Register VRTC  (0x80) register.RegisterDescription */
+#define VRTC_VRTC_OFFMASK_MASK				0x08
+#define VRTC_VRTC_OFFMASK_SHIFT				3
+#define VRTC_ST_MASK					0x03
+#define VRTC_ST_SHIFT					0
+
+
+/*Register VIO	(0x80) register.RegisterDescription */
+#define VIO_ILMAX_MASK					0xC0
+#define VIO_ILMAX_SHIFT					6
+#define VIO_SEL_MASK					0x0C
+#define VIO_SEL_SHIFT					2
+#define VIO_ST_MASK					0x03
+#define VIO_ST_SHIFT					0
+
+
+/*Register VDD1  (0x80) register.RegisterDescription */
+#define VDD1_VGAIN_SEL_MASK				0xC0
+#define VDD1_VGAIN_SEL_SHIFT				6
+#define VDD1_ILMAX_MASK					0x20
+#define VDD1_ILMAX_SHIFT				5
+#define VDD1_TSTEP_MASK					0x1C
+#define VDD1_TSTEP_SHIFT				2
+#define VDD1_ST_MASK					0x03
+#define VDD1_ST_SHIFT					0
+
+
+/*Register VDD1_OP  (0x80) register.RegisterDescription */
+#define VDD1_OP_CMD_MASK				0x80
+#define VDD1_OP_CMD_SHIFT				7
+#define VDD1_OP_SEL_MASK				0x7F
+#define VDD1_OP_SEL_SHIFT				0
+
+
+/*Register VDD1_SR  (0x80) register.RegisterDescription */
+#define VDD1_SR_SEL_MASK				0x7F
+#define VDD1_SR_SEL_SHIFT				0
+
+
+/*Register VDD2  (0x80) register.RegisterDescription */
+#define VDD2_VGAIN_SEL_MASK				0xC0
+#define VDD2_VGAIN_SEL_SHIFT				6
+#define VDD2_ILMAX_MASK					0x20
+#define VDD2_ILMAX_SHIFT				5
+#define VDD2_TSTEP_MASK					0x1C
+#define VDD2_TSTEP_SHIFT				2
+#define VDD2_ST_MASK					0x03
+#define VDD2_ST_SHIFT					0
+
+
+/*Register VDD2_OP  (0x80) register.RegisterDescription */
+#define VDD2_OP_CMD_MASK				0x80
+#define VDD2_OP_CMD_SHIFT				7
+#define VDD2_OP_SEL_MASK				0x7F
+#define VDD2_OP_SEL_SHIFT				0
+
+/*Register VDD2_SR  (0x80) register.RegisterDescription */
+#define VDD2_SR_SEL_MASK				0x7F
+#define VDD2_SR_SEL_SHIFT				0
+
+
+/*Registers VDD1, VDD2 voltage values definitions */
+#define VDD1_2_NUM_VOLT_FINE				73
+#define VDD1_2_NUM_VOLT_COARSE				3
+#define VDD1_2_MIN_VOLT					6000
+#define VDD1_2_OFFSET					125
+
+
+/*Register VDD3  (0x80) register.RegisterDescription */
+#define VDD3_CKINEN_MASK				0x04
+#define VDD3_CKINEN_SHIFT				2
+#define VDD3_ST_MASK					0x03
+#define VDD3_ST_SHIFT					0
+#define VDDCTRL_MIN_VOLT				6000
+#define VDDCTRL_OFFSET					125
+
+/*Registers VDIG (0x80) to VDAC register.RegisterDescription */
+#define LDO_SEL_MASK					0x0C
+#define LDO_SEL_SHIFT					2
+#define LDO_ST_MASK					0x03
+#define LDO_ST_SHIFT					0
+#define LDO_ST_ON_BIT					0x01
+#define LDO_ST_MODE_BIT					0x02	
+
+
+/* Registers LDO1 to LDO8 in tps65910 */
+#define LDO1_SEL_MASK					0xFC
+#define LDO3_SEL_MASK					0x7C
+#define LDO_MIN_VOLT					1000
+#define LDO_MAX_VOLT					3300
+
+
+/*Register VDIG1  (0x80) register.RegisterDescription */
+#define VDIG1_SEL_MASK					0x0C
+#define VDIG1_SEL_SHIFT					2
+#define VDIG1_ST_MASK					0x03
+#define VDIG1_ST_SHIFT					0
+
+
+/*Register VDIG2  (0x80) register.RegisterDescription */
+#define VDIG2_SEL_MASK					0x0C
+#define VDIG2_SEL_SHIFT					2
+#define VDIG2_ST_MASK					0x03
+#define VDIG2_ST_SHIFT					0
+
+
+/*Register VAUX1  (0x80) register.RegisterDescription */
+#define VAUX1_SEL_MASK					0x0C
+#define VAUX1_SEL_SHIFT					2
+#define VAUX1_ST_MASK					0x03
+#define VAUX1_ST_SHIFT					0
+
+
+/*Register VAUX2  (0x80) register.RegisterDescription */
+#define VAUX2_SEL_MASK					0x0C
+#define VAUX2_SEL_SHIFT					2
+#define VAUX2_ST_MASK					0x03
+#define VAUX2_ST_SHIFT					0
+
+
+/*Register VAUX33  (0x80) register.RegisterDescription */
+#define VAUX33_SEL_MASK					0x0C
+#define VAUX33_SEL_SHIFT				2
+#define VAUX33_ST_MASK					0x03
+#define VAUX33_ST_SHIFT					0
+
+
+/*Register VMMC  (0x80) register.RegisterDescription */
+#define VMMC_SEL_MASK					0x0C
+#define VMMC_SEL_SHIFT					2
+#define VMMC_ST_MASK					0x03
+#define VMMC_ST_SHIFT					0
+
+
+/*Register VPLL  (0x80) register.RegisterDescription */
+#define VPLL_SEL_MASK					0x0C
+#define VPLL_SEL_SHIFT					2
+#define VPLL_ST_MASK					0x03
+#define VPLL_ST_SHIFT					0
+
+
+/*Register VDAC  (0x80) register.RegisterDescription */
+#define VDAC_SEL_MASK					0x0C
+#define VDAC_SEL_SHIFT					2
+#define VDAC_ST_MASK					0x03
+#define VDAC_ST_SHIFT					0
+
+
+/*Register THERM  (0x80) register.RegisterDescription */
+#define THERM_THERM_HD_MASK				0x20
+#define THERM_THERM_HD_SHIFT				5
+#define THERM_THERM_TS_MASK				0x10
+#define THERM_THERM_TS_SHIFT				4
+#define THERM_THERM_HDSEL_MASK				0x0C
+#define THERM_THERM_HDSEL_SHIFT				2
+#define THERM_RSVD1_MASK				0x02
+#define THERM_RSVD1_SHIFT				1
+#define THERM_THERM_STATE_MASK				0x01
+#define THERM_THERM_STATE_SHIFT				0
+
+
+/*Register BBCH  (0x80) register.RegisterDescription */
+#define BBCH_BBSEL_MASK					0x06
+#define BBCH_BBSEL_SHIFT				1
+#define BBCH_BBCHEN_MASK				0x01
+#define BBCH_BBCHEN_SHIFT				0
+
+
+/*Register DCDCCTRL  (0x80) register.RegisterDescription */
+#define DCDCCTRL_VDD2_PSKIP_MASK			0x20
+#define DCDCCTRL_VDD2_PSKIP_SHIFT			5
+#define DCDCCTRL_VDD1_PSKIP_MASK			0x10
+#define DCDCCTRL_VDD1_PSKIP_SHIFT			4
+#define DCDCCTRL_VIO_PSKIP_MASK				0x08
+#define DCDCCTRL_VIO_PSKIP_SHIFT			3
+#define DCDCCTRL_DCDCCKEXT_MASK				0x04
+#define DCDCCTRL_DCDCCKEXT_SHIFT			2
+#define DCDCCTRL_DCDCCKSYNC_MASK			0x03
+#define DCDCCTRL_DCDCCKSYNC_SHIFT			0
+
+
+/*Register DEVCTRL  (0x80) register.RegisterDescription */
+#define DEVCTRL_RTC_PWDN_MASK				0x40
+#define DEVCTRL_RTC_PWDN_SHIFT				6
+#define DEVCTRL_CK32K_CTRL_MASK				0x20
+#define DEVCTRL_CK32K_CTRL_SHIFT			5
+#define DEVCTRL_SR_CTL_I2C_SEL_MASK			0x10
+#define DEVCTRL_SR_CTL_I2C_SEL_SHIFT			4
+#define DEVCTRL_DEV_OFF_RST_MASK			0x08
+#define DEVCTRL_DEV_OFF_RST_SHIFT			3
+#define DEVCTRL_DEV_ON_MASK				0x04
+#define DEVCTRL_DEV_ON_SHIFT				2
+#define DEVCTRL_DEV_SLP_MASK				0x02
+#define DEVCTRL_DEV_SLP_SHIFT				1
+#define DEVCTRL_DEV_OFF_MASK				0x01
+#define DEVCTRL_DEV_OFF_SHIFT				0
+
+
+/*Register DEVCTRL2  (0x80) register.RegisterDescription */
+#define DEVCTRL2_TSLOT_LENGTH_MASK			0x30
+#define DEVCTRL2_TSLOT_LENGTH_SHIFT			4
+#define DEVCTRL2_SLEEPSIG_POL_MASK			0x08
+#define DEVCTRL2_SLEEPSIG_POL_SHIFT			3
+#define DEVCTRL2_PWON_LP_OFF_MASK			0x04
+#define DEVCTRL2_PWON_LP_OFF_SHIFT			2
+#define DEVCTRL2_PWON_LP_RST_MASK			0x02
+#define DEVCTRL2_PWON_LP_RST_SHIFT			1
+#define DEVCTRL2_IT_POL_MASK				0x01
+#define DEVCTRL2_IT_POL_SHIFT				0
+
+
+/*Register SLEEP_KEEP_LDO_ON  (0x80) register.RegisterDescription */
+#define SLEEP_KEEP_LDO_ON_VDAC_KEEPON_MASK		0x80
+#define SLEEP_KEEP_LDO_ON_VDAC_KEEPON_SHIFT		7
+#define SLEEP_KEEP_LDO_ON_VPLL_KEEPON_MASK		0x40
+#define SLEEP_KEEP_LDO_ON_VPLL_KEEPON_SHIFT		6
+#define SLEEP_KEEP_LDO_ON_VAUX33_KEEPON_MASK		0x20
+#define SLEEP_KEEP_LDO_ON_VAUX33_KEEPON_SHIFT		5
+#define SLEEP_KEEP_LDO_ON_VAUX2_KEEPON_MASK		0x10
+#define SLEEP_KEEP_LDO_ON_VAUX2_KEEPON_SHIFT		4
+#define SLEEP_KEEP_LDO_ON_VAUX1_KEEPON_MASK		0x08
+#define SLEEP_KEEP_LDO_ON_VAUX1_KEEPON_SHIFT		3
+#define SLEEP_KEEP_LDO_ON_VDIG2_KEEPON_MASK		0x04
+#define SLEEP_KEEP_LDO_ON_VDIG2_KEEPON_SHIFT		2
+#define SLEEP_KEEP_LDO_ON_VDIG1_KEEPON_MASK		0x02
+#define SLEEP_KEEP_LDO_ON_VDIG1_KEEPON_SHIFT		1
+#define SLEEP_KEEP_LDO_ON_VMMC_KEEPON_MASK		0x01
+#define SLEEP_KEEP_LDO_ON_VMMC_KEEPON_SHIFT		0
+
+
+/*Register SLEEP_KEEP_RES_ON  (0x80) register.RegisterDescription */
+#define SLEEP_KEEP_RES_ON_THERM_KEEPON_MASK		0x80
+#define SLEEP_KEEP_RES_ON_THERM_KEEPON_SHIFT		7
+#define SLEEP_KEEP_RES_ON_CLKOUT32K_KEEPON_MASK		0x40
+#define SLEEP_KEEP_RES_ON_CLKOUT32K_KEEPON_SHIFT	6
+#define SLEEP_KEEP_RES_ON_VRTC_KEEPON_MASK		0x20
+#define SLEEP_KEEP_RES_ON_VRTC_KEEPON_SHIFT		5
+#define SLEEP_KEEP_RES_ON_I2CHS_KEEPON_MASK		0x10
+#define SLEEP_KEEP_RES_ON_I2CHS_KEEPON_SHIFT		4
+#define SLEEP_KEEP_RES_ON_VDD3_KEEPON_MASK		0x08
+#define SLEEP_KEEP_RES_ON_VDD3_KEEPON_SHIFT		3
+#define SLEEP_KEEP_RES_ON_VDD2_KEEPON_MASK		0x04
+#define SLEEP_KEEP_RES_ON_VDD2_KEEPON_SHIFT		2
+#define SLEEP_KEEP_RES_ON_VDD1_KEEPON_MASK		0x02
+#define SLEEP_KEEP_RES_ON_VDD1_KEEPON_SHIFT		1
+#define SLEEP_KEEP_RES_ON_VIO_KEEPON_MASK		0x01
+#define SLEEP_KEEP_RES_ON_VIO_KEEPON_SHIFT		0
+
+
+/*Register SLEEP_SET_LDO_OFF  (0x80) register.RegisterDescription */
+#define SLEEP_SET_LDO_OFF_VDAC_SETOFF_MASK		0x80
+#define SLEEP_SET_LDO_OFF_VDAC_SETOFF_SHIFT		7
+#define SLEEP_SET_LDO_OFF_VPLL_SETOFF_MASK		0x40
+#define SLEEP_SET_LDO_OFF_VPLL_SETOFF_SHIFT		6
+#define SLEEP_SET_LDO_OFF_VAUX33_SETOFF_MASK		0x20
+#define SLEEP_SET_LDO_OFF_VAUX33_SETOFF_SHIFT		5
+#define SLEEP_SET_LDO_OFF_VAUX2_SETOFF_MASK		0x10
+#define SLEEP_SET_LDO_OFF_VAUX2_SETOFF_SHIFT		4
+#define SLEEP_SET_LDO_OFF_VAUX1_SETOFF_MASK		0x08
+#define SLEEP_SET_LDO_OFF_VAUX1_SETOFF_SHIFT		3
+#define SLEEP_SET_LDO_OFF_VDIG2_SETOFF_MASK		0x04
+#define SLEEP_SET_LDO_OFF_VDIG2_SETOFF_SHIFT		2
+#define SLEEP_SET_LDO_OFF_VDIG1_SETOFF_MASK		0x02
+#define SLEEP_SET_LDO_OFF_VDIG1_SETOFF_SHIFT		1
+#define SLEEP_SET_LDO_OFF_VMMC_SETOFF_MASK		0x01
+#define SLEEP_SET_LDO_OFF_VMMC_SETOFF_SHIFT		0
+
+
+/*Register SLEEP_SET_RES_OFF  (0x80) register.RegisterDescription */
+#define SLEEP_SET_RES_OFF_DEFAULT_VOLT_MASK		0x80
+#define SLEEP_SET_RES_OFF_DEFAULT_VOLT_SHIFT		7
+#define SLEEP_SET_RES_OFF_RSVD_MASK			0x60
+#define SLEEP_SET_RES_OFF_RSVD_SHIFT			5
+#define SLEEP_SET_RES_OFF_SPARE_SETOFF_MASK		0x10
+#define SLEEP_SET_RES_OFF_SPARE_SETOFF_SHIFT		4
+#define SLEEP_SET_RES_OFF_VDD3_SETOFF_MASK		0x08
+#define SLEEP_SET_RES_OFF_VDD3_SETOFF_SHIFT		3
+#define SLEEP_SET_RES_OFF_VDD2_SETOFF_MASK		0x04
+#define SLEEP_SET_RES_OFF_VDD2_SETOFF_SHIFT		2
+#define SLEEP_SET_RES_OFF_VDD1_SETOFF_MASK		0x02
+#define SLEEP_SET_RES_OFF_VDD1_SETOFF_SHIFT		1
+#define SLEEP_SET_RES_OFF_VIO_SETOFF_MASK		0x01
+#define SLEEP_SET_RES_OFF_VIO_SETOFF_SHIFT		0
+
+
+/*Register EN1_LDO_ASS	(0x80) register.RegisterDescription */
+#define EN1_LDO_ASS_VDAC_EN1_MASK			0x80
+#define EN1_LDO_ASS_VDAC_EN1_SHIFT			7
+#define EN1_LDO_ASS_VPLL_EN1_MASK			0x40
+#define EN1_LDO_ASS_VPLL_EN1_SHIFT			6
+#define EN1_LDO_ASS_VAUX33_EN1_MASK			0x20
+#define EN1_LDO_ASS_VAUX33_EN1_SHIFT			5
+#define EN1_LDO_ASS_VAUX2_EN1_MASK			0x10
+#define EN1_LDO_ASS_VAUX2_EN1_SHIFT			4
+#define EN1_LDO_ASS_VAUX1_EN1_MASK			0x08
+#define EN1_LDO_ASS_VAUX1_EN1_SHIFT			3
+#define EN1_LDO_ASS_VDIG2_EN1_MASK			0x04
+#define EN1_LDO_ASS_VDIG2_EN1_SHIFT			2
+#define EN1_LDO_ASS_VDIG1_EN1_MASK			0x02
+#define EN1_LDO_ASS_VDIG1_EN1_SHIFT			1
+#define EN1_LDO_ASS_VMMC_EN1_MASK			0x01
+#define EN1_LDO_ASS_VMMC_EN1_SHIFT			0
+
+
+/*Register EN1_SMPS_ASS  (0x80) register.RegisterDescription */
+#define EN1_SMPS_ASS_RSVD_MASK				0xE0
+#define EN1_SMPS_ASS_RSVD_SHIFT				5
+#define EN1_SMPS_ASS_SPARE_EN1_MASK			0x10
+#define EN1_SMPS_ASS_SPARE_EN1_SHIFT			4
+#define EN1_SMPS_ASS_VDD3_EN1_MASK			0x08
+#define EN1_SMPS_ASS_VDD3_EN1_SHIFT			3
+#define EN1_SMPS_ASS_VDD2_EN1_MASK			0x04
+#define EN1_SMPS_ASS_VDD2_EN1_SHIFT			2
+#define EN1_SMPS_ASS_VDD1_EN1_MASK			0x02
+#define EN1_SMPS_ASS_VDD1_EN1_SHIFT			1
+#define EN1_SMPS_ASS_VIO_EN1_MASK			0x01
+#define EN1_SMPS_ASS_VIO_EN1_SHIFT			0
+
+
+/*Register EN2_LDO_ASS	(0x80) register.RegisterDescription */
+#define EN2_LDO_ASS_VDAC_EN2_MASK			0x80
+#define EN2_LDO_ASS_VDAC_EN2_SHIFT			7
+#define EN2_LDO_ASS_VPLL_EN2_MASK			0x40
+#define EN2_LDO_ASS_VPLL_EN2_SHIFT			6
+#define EN2_LDO_ASS_VAUX33_EN2_MASK			0x20
+#define EN2_LDO_ASS_VAUX33_EN2_SHIFT			5
+#define EN2_LDO_ASS_VAUX2_EN2_MASK			0x10
+#define EN2_LDO_ASS_VAUX2_EN2_SHIFT			4
+#define EN2_LDO_ASS_VAUX1_EN2_MASK			0x08
+#define EN2_LDO_ASS_VAUX1_EN2_SHIFT			3
+#define EN2_LDO_ASS_VDIG2_EN2_MASK			0x04
+#define EN2_LDO_ASS_VDIG2_EN2_SHIFT			2
+#define EN2_LDO_ASS_VDIG1_EN2_MASK			0x02
+#define EN2_LDO_ASS_VDIG1_EN2_SHIFT			1
+#define EN2_LDO_ASS_VMMC_EN2_MASK			0x01
+#define EN2_LDO_ASS_VMMC_EN2_SHIFT			0
+
+
+/*Register EN2_SMPS_ASS  (0x80) register.RegisterDescription */
+#define EN2_SMPS_ASS_RSVD_MASK				0xE0
+#define EN2_SMPS_ASS_RSVD_SHIFT				5
+#define EN2_SMPS_ASS_SPARE_EN2_MASK			0x10
+#define EN2_SMPS_ASS_SPARE_EN2_SHIFT			4
+#define EN2_SMPS_ASS_VDD3_EN2_MASK			0x08
+#define EN2_SMPS_ASS_VDD3_EN2_SHIFT			3
+#define EN2_SMPS_ASS_VDD2_EN2_MASK			0x04
+#define EN2_SMPS_ASS_VDD2_EN2_SHIFT			2
+#define EN2_SMPS_ASS_VDD1_EN2_MASK			0x02
+#define EN2_SMPS_ASS_VDD1_EN2_SHIFT			1
+#define EN2_SMPS_ASS_VIO_EN2_MASK			0x01
+#define EN2_SMPS_ASS_VIO_EN2_SHIFT			0
+
+
+/*Register EN3_LDO_ASS	(0x80) register.RegisterDescription */
+#define EN3_LDO_ASS_VDAC_EN3_MASK			0x80
+#define EN3_LDO_ASS_VDAC_EN3_SHIFT			7
+#define EN3_LDO_ASS_VPLL_EN3_MASK			0x40
+#define EN3_LDO_ASS_VPLL_EN3_SHIFT			6
+#define EN3_LDO_ASS_VAUX33_EN3_MASK			0x20
+#define EN3_LDO_ASS_VAUX33_EN3_SHIFT			5
+#define EN3_LDO_ASS_VAUX2_EN3_MASK			0x10
+#define EN3_LDO_ASS_VAUX2_EN3_SHIFT			4
+#define EN3_LDO_ASS_VAUX1_EN3_MASK			0x08
+#define EN3_LDO_ASS_VAUX1_EN3_SHIFT			3
+#define EN3_LDO_ASS_VDIG2_EN3_MASK			0x04
+#define EN3_LDO_ASS_VDIG2_EN3_SHIFT			2
+#define EN3_LDO_ASS_VDIG1_EN3_MASK			0x02
+#define EN3_LDO_ASS_VDIG1_EN3_SHIFT			1
+#define EN3_LDO_ASS_VMMC_EN3_MASK			0x01
+#define EN3_LDO_ASS_VMMC_EN3_SHIFT			0
+
+
+/*Register SPARE  (0x80) register.RegisterDescription */
+#define SPARE_SPARE_MASK				0xFF
+#define SPARE_SPARE_SHIFT				0
+
+
+/*Register INT_STS  (0x80) register.RegisterDescription */
+#define INT_STS_RTC_PERIOD_IT_MASK			0x80
+#define INT_STS_RTC_PERIOD_IT_SHIFT			7
+#define INT_STS_RTC_ALARM_IT_MASK			0x40
+#define INT_STS_RTC_ALARM_IT_SHIFT			6
+#define INT_STS_HOTDIE_IT_MASK				0x20
+#define INT_STS_HOTDIE_IT_SHIFT				5
+#define INT_STS_PWRHOLD_IT_MASK				0x10
+#define INT_STS_PWRHOLD_IT_SHIFT			4
+#define INT_STS_PWRON_LP_IT_MASK			0x08
+#define INT_STS_PWRON_LP_IT_SHIFT			3
+#define INT_STS_PWRON_IT_MASK				0x04
+#define INT_STS_PWRON_IT_SHIFT				2
+#define INT_STS_VMBHI_IT_MASK				0x02
+#define INT_STS_VMBHI_IT_SHIFT				1
+#define INT_STS_VMBDCH_IT_MASK				0x01
+#define INT_STS_VMBDCH_IT_SHIFT				0
+
+
+/*Register INT_MSK  (0x80) register.RegisterDescription */
+#define INT_MSK_RTC_PERIOD_IT_MSK_MASK			0x80
+#define INT_MSK_RTC_PERIOD_IT_MSK_SHIFT			7
+#define INT_MSK_RTC_ALARM_IT_MSK_MASK			0x40
+#define INT_MSK_RTC_ALARM_IT_MSK_SHIFT			6
+#define INT_MSK_HOTDIE_IT_MSK_MASK			0x20
+#define INT_MSK_HOTDIE_IT_MSK_SHIFT			5
+#define INT_MSK_PWRHOLD_IT_MSK_MASK			0x10
+#define INT_MSK_PWRHOLD_IT_MSK_SHIFT			4
+#define INT_MSK_PWRON_LP_IT_MSK_MASK			0x08
+#define INT_MSK_PWRON_LP_IT_MSK_SHIFT			3
+#define INT_MSK_PWRON_IT_MSK_MASK			0x04
+#define INT_MSK_PWRON_IT_MSK_SHIFT			2
+#define INT_MSK_VMBHI_IT_MSK_MASK			0x02
+#define INT_MSK_VMBHI_IT_MSK_SHIFT			1
+#define INT_MSK_VMBDCH_IT_MSK_MASK			0x01
+#define INT_MSK_VMBDCH_IT_MSK_SHIFT			0
+
+
+/*Register INT_STS2  (0x80) register.RegisterDescription */
+#define INT_STS2_GPIO3_F_IT_MASK			0x80
+#define INT_STS2_GPIO3_F_IT_SHIFT			7
+#define INT_STS2_GPIO3_R_IT_MASK			0x40
+#define INT_STS2_GPIO3_R_IT_SHIFT			6
+#define INT_STS2_GPIO2_F_IT_MASK			0x20
+#define INT_STS2_GPIO2_F_IT_SHIFT			5
+#define INT_STS2_GPIO2_R_IT_MASK			0x10
+#define INT_STS2_GPIO2_R_IT_SHIFT			4
+#define INT_STS2_GPIO1_F_IT_MASK			0x08
+#define INT_STS2_GPIO1_F_IT_SHIFT			3
+#define INT_STS2_GPIO1_R_IT_MASK			0x04
+#define INT_STS2_GPIO1_R_IT_SHIFT			2
+#define INT_STS2_GPIO0_F_IT_MASK			0x02
+#define INT_STS2_GPIO0_F_IT_SHIFT			1
+#define INT_STS2_GPIO0_R_IT_MASK			0x01
+#define INT_STS2_GPIO0_R_IT_SHIFT			0
+
+
+/*Register INT_MSK2  (0x80) register.RegisterDescription */
+#define INT_MSK2_GPIO3_F_IT_MSK_MASK			0x80
+#define INT_MSK2_GPIO3_F_IT_MSK_SHIFT			7
+#define INT_MSK2_GPIO3_R_IT_MSK_MASK			0x40
+#define INT_MSK2_GPIO3_R_IT_MSK_SHIFT			6
+#define INT_MSK2_GPIO2_F_IT_MSK_MASK			0x20
+#define INT_MSK2_GPIO2_F_IT_MSK_SHIFT			5
+#define INT_MSK2_GPIO2_R_IT_MSK_MASK			0x10
+#define INT_MSK2_GPIO2_R_IT_MSK_SHIFT			4
+#define INT_MSK2_GPIO1_F_IT_MSK_MASK			0x08
+#define INT_MSK2_GPIO1_F_IT_MSK_SHIFT			3
+#define INT_MSK2_GPIO1_R_IT_MSK_MASK			0x04
+#define INT_MSK2_GPIO1_R_IT_MSK_SHIFT			2
+#define INT_MSK2_GPIO0_F_IT_MSK_MASK			0x02
+#define INT_MSK2_GPIO0_F_IT_MSK_SHIFT			1
+#define INT_MSK2_GPIO0_R_IT_MSK_MASK			0x01
+#define INT_MSK2_GPIO0_R_IT_MSK_SHIFT			0
+
+
+/*Register INT_STS3  (0x80) register.RegisterDescription */
+#define INT_STS3_GPIO5_F_IT_MASK			0x08
+#define INT_STS3_GPIO5_F_IT_SHIFT			3
+#define INT_STS3_GPIO5_R_IT_MASK			0x04
+#define INT_STS3_GPIO5_R_IT_SHIFT			2
+#define INT_STS3_GPIO4_F_IT_MASK			0x02
+#define INT_STS3_GPIO4_F_IT_SHIFT			1
+#define INT_STS3_GPIO4_R_IT_MASK			0x01
+#define INT_STS3_GPIO4_R_IT_SHIFT			0
+
+
+/*Register INT_MSK3  (0x80) register.RegisterDescription */
+#define INT_MSK3_GPIO5_F_IT_MSK_MASK			0x08
+#define INT_MSK3_GPIO5_F_IT_MSK_SHIFT			3
+#define INT_MSK3_GPIO5_R_IT_MSK_MASK			0x04
+#define INT_MSK3_GPIO5_R_IT_MSK_SHIFT			2
+#define INT_MSK3_GPIO4_F_IT_MSK_MASK			0x02
+#define INT_MSK3_GPIO4_F_IT_MSK_SHIFT			1
+#define INT_MSK3_GPIO4_R_IT_MSK_MASK			0x01
+#define INT_MSK3_GPIO4_R_IT_MSK_SHIFT			0
+
+
+/*Register GPIO  (0x80) register.RegisterDescription */
+#define GPIO_SLEEP_MASK                         0x80
+#define GPIO_SLEEP_SHIFT                        7
+#define GPIO_DEB_MASK                           0x10
+#define GPIO_DEB_SHIFT                          4
+#define GPIO_PUEN_MASK                          0x08
+#define GPIO_PUEN_SHIFT                         3
+#define GPIO_CFG_MASK                           0x04
+#define GPIO_CFG_SHIFT                          2
+#define GPIO_STS_MASK                           0x02
+#define GPIO_STS_SHIFT                          1
+#define GPIO_SET_MASK                           0x01
+#define GPIO_SET_SHIFT                          0
+
+
+/*Register JTAGVERNUM  (0x80) register.RegisterDescription */
+#define JTAGVERNUM_VERNUM_MASK				0x0F
+#define JTAGVERNUM_VERNUM_SHIFT				0
+
+
+/* Register VDDCTRL (0x27) bit definitions */
+#define VDDCTRL_ST_MASK                                  0x03
+#define VDDCTRL_ST_SHIFT                                 0
+
+
+/*Register VDDCTRL_OP  (0x28) bit definitios */
+#define VDDCTRL_OP_CMD_MASK                              0x80
+#define VDDCTRL_OP_CMD_SHIFT                             7
+#define VDDCTRL_OP_SEL_MASK                              0x7F
+#define VDDCTRL_OP_SEL_SHIFT                             0
+
+
+/*Register VDDCTRL_SR  (0x29) bit definitions */
+#define VDDCTRL_SR_SEL_MASK                              0x7F
+#define VDDCTRL_SR_SEL_SHIFT                             0
+
+
+/* IRQ Definitions */
+#define TPS65910_IRQ_VBAT_VMBDCH			0
+#define TPS65910_IRQ_VBAT_VMHI				1
+#define TPS65910_IRQ_PWRON				2
+#define TPS65910_IRQ_PWRON_LP				3
+#define TPS65910_IRQ_PWRHOLD				4
+#define TPS65910_IRQ_HOTDIE				5
+#define TPS65910_IRQ_RTC_ALARM				6
+#define TPS65910_IRQ_RTC_PERIOD				7
+#define TPS65910_IRQ_GPIO_R				8
+#define TPS65910_IRQ_GPIO_F				9
+#define TPS65910_NUM_IRQ				10
+
+#define TPS65911_IRQ_VBAT_VMBDCH			0
+#define TPS65911_IRQ_VBAT_VMBDCH2L			1
+#define TPS65911_IRQ_VBAT_VMBDCH2H			2
+#define TPS65911_IRQ_VBAT_VMHI				3
+#define TPS65911_IRQ_PWRON				4
+#define TPS65911_IRQ_PWRON_LP				5
+#define TPS65911_IRQ_PWRHOLD_F				6
+#define TPS65911_IRQ_PWRHOLD_R				7
+#define TPS65911_IRQ_HOTDIE				8
+#define TPS65911_IRQ_RTC_ALARM				9
+#define TPS65911_IRQ_RTC_PERIOD				10
+#define TPS65911_IRQ_GPIO0_R				11
+#define TPS65911_IRQ_GPIO0_F				12
+#define TPS65911_IRQ_GPIO1_R				13
+#define TPS65911_IRQ_GPIO1_F				14
+#define TPS65911_IRQ_GPIO2_R				15
+#define TPS65911_IRQ_GPIO2_F				16
+#define TPS65911_IRQ_GPIO3_R				17
+#define TPS65911_IRQ_GPIO3_F				18
+#define TPS65911_IRQ_GPIO4_R				19
+#define TPS65911_IRQ_GPIO4_F				20
+#define TPS65911_IRQ_GPIO5_R				21
+#define TPS65911_IRQ_GPIO5_F				22
+#define TPS65911_IRQ_WTCHDG				23
+#define TPS65911_IRQ_PWRDN				24
+
+#define TPS65911_NUM_IRQ				25
+
+
+/* GPIO Register Definitions */
+#define TPS65910_GPIO_DEB				BIT(2)
+#define TPS65910_GPIO_PUEN				BIT(3)
+#define TPS65910_GPIO_CFG				BIT(2)
+#define TPS65910_GPIO_STS				BIT(1)
+#define TPS65910_GPIO_SET				BIT(0)
+
+/* Max number of TPS65910/11 GPIOs */
+#define TPS65910_NUM_GPIO				6
+#define TPS65911_NUM_GPIO				9
+#define TPS6591X_MAX_NUM_GPIO				9
+
+/* Regulator Index Definitions */
+#define TPS65910_REG_VRTC				0
+#define TPS65910_REG_VIO				1
+#define TPS65910_REG_VDD1				2
+#define TPS65910_REG_VDD2				3
+#define TPS65910_REG_VDD3				4
+#define TPS65910_REG_VDIG1				5
+#define TPS65910_REG_VDIG2				6
+#define TPS65910_REG_VPLL				7
+#define TPS65910_REG_VDAC				8
+#define TPS65910_REG_VAUX1				9
+#define TPS65910_REG_VAUX2				10
+#define TPS65910_REG_VAUX33				11
+#define TPS65910_REG_VMMC				12
+
+#define TPS65911_REG_VDDCTRL				4
+#define TPS65911_REG_LDO1				5
+#define TPS65911_REG_LDO2				6
+#define TPS65911_REG_LDO3				7
+#define TPS65911_REG_LDO4				8
+#define TPS65911_REG_LDO5				9
+#define TPS65911_REG_LDO6				10
+#define TPS65911_REG_LDO7				11
+#define TPS65911_REG_LDO8				12
+
+/* Max number of TPS65910/11 regulators */
+#define TPS65910_NUM_REGS				13
+
+/* External sleep controls through EN1/EN2/EN3/SLEEP inputs */
+#define TPS65910_SLEEP_CONTROL_EXT_INPUT_EN1		0x1
+#define TPS65910_SLEEP_CONTROL_EXT_INPUT_EN2		0x2
+#define TPS65910_SLEEP_CONTROL_EXT_INPUT_EN3		0x4
+#define TPS65911_SLEEP_CONTROL_EXT_INPUT_SLEEP		0x8
+
+/**
+ * struct tps65910_board
+ * Board platform data may be used to initialize regulators.
+ */
+
+struct tps65910_board {
+	int gpio_base;
+	int irq;
+	int irq_base;
+	int vmbch_threshold;
+	int vmbch2_threshold;
+	bool en_gpio_sleep[TPS6591X_MAX_NUM_GPIO];
+	unsigned long regulator_ext_sleep_control[TPS65910_NUM_REGS];
+	struct regulator_init_data *tps65910_pmic_init_data[TPS65910_NUM_REGS];
+};
+
+/**
+ * struct tps65910 - tps65910 sub-driver chip access routines
+ */
+
+struct tps65910 {
+	struct device *dev;
+	struct i2c_client *i2c_client;
+	struct regmap *regmap;
+	struct mutex io_mutex;
+	unsigned int id;
+	int (*read)(struct tps65910 *tps65910, u8 reg, int size, void *dest);
+	int (*write)(struct tps65910 *tps65910, u8 reg, int size, void *src);
+
+	/* Client devices */
+	struct tps65910_pmic *pmic;
+	struct tps65910_rtc *rtc;
+	struct tps65910_power *power;
+
+	/* GPIO Handling */
+	struct gpio_chip gpio;
+
+	/* IRQ Handling */
+	struct mutex irq_lock;
+	int chip_irq;
+	int irq_base;
+	int irq_num;
+	u32 irq_mask;
+};
+
+struct tps65910_platform_data {
+	int irq;
+	int irq_base;
+};
+
+int tps65910_set_bits(struct tps65910 *tps65910, u8 reg, u8 mask);
+int tps65910_clear_bits(struct tps65910 *tps65910, u8 reg, u8 mask);
+void tps65910_gpio_init(struct tps65910 *tps65910, int gpio_base);
+int tps65910_irq_init(struct tps65910 *tps65910, int irq,
+		struct tps65910_platform_data *pdata);
+int tps65910_irq_exit(struct tps65910 *tps65910);
+
+static inline int tps65910_chip_id(struct tps65910 *tps65910)
+{
+	return tps65910->id;
+}
+
+#endif /*  __LINUX_MFD_TPS65910_H */
diff --git a/include/linux/mfd/tps65912.h b/include/linux/mfd/tps65912.h
new file mode 100644
index 00000000..aaceab40
--- /dev/null
+++ b/include/linux/mfd/tps65912.h
@@ -0,0 +1,327 @@
+/*
+ * tps65912.h  --  TI TPS6591x
+ *
+ * Copyright 2011 Texas Instruments Inc.
+ *
+ * Author: Margarita Olaya <magi@slimlogic.co.uk>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __LINUX_MFD_TPS65912_H
+#define __LINUX_MFD_TPS65912_H
+
+/* TPS regulator type list */
+#define REGULATOR_LDO		0
+#define REGULATOR_DCDC		1
+
+/*
+ * List of registers for TPS65912
+ */
+
+#define TPS65912_DCDC1_CTRL		0x00
+#define TPS65912_DCDC2_CTRL		0x01
+#define TPS65912_DCDC3_CTRL		0x02
+#define TPS65912_DCDC4_CTRL		0x03
+#define TPS65912_DCDC1_OP		0x04
+#define TPS65912_DCDC1_AVS		0x05
+#define TPS65912_DCDC1_LIMIT		0x06
+#define TPS65912_DCDC2_OP		0x07
+#define TPS65912_DCDC2_AVS		0x08
+#define TPS65912_DCDC2_LIMIT		0x09
+#define TPS65912_DCDC3_OP		0x0A
+#define TPS65912_DCDC3_AVS		0x0B
+#define TPS65912_DCDC3_LIMIT		0x0C
+#define TPS65912_DCDC4_OP		0x0D
+#define TPS65912_DCDC4_AVS		0x0E
+#define TPS65912_DCDC4_LIMIT		0x0F
+#define TPS65912_LDO1_OP		0x10
+#define TPS65912_LDO1_AVS		0x11
+#define TPS65912_LDO1_LIMIT		0x12
+#define TPS65912_LDO2_OP		0x13
+#define TPS65912_LDO2_AVS		0x14
+#define TPS65912_LDO2_LIMIT		0x15
+#define TPS65912_LDO3_OP		0x16
+#define TPS65912_LDO3_AVS		0x17
+#define TPS65912_LDO3_LIMIT		0x18
+#define TPS65912_LDO4_OP		0x19
+#define TPS65912_LDO4_AVS		0x1A
+#define TPS65912_LDO4_LIMIT		0x1B
+#define TPS65912_LDO5			0x1C
+#define TPS65912_LDO6			0x1D
+#define TPS65912_LDO7			0x1E
+#define TPS65912_LDO8			0x1F
+#define TPS65912_LDO9			0x20
+#define TPS65912_LDO10			0x21
+#define TPS65912_THRM			0x22
+#define TPS65912_CLK32OUT		0x23
+#define TPS65912_DEVCTRL		0x24
+#define TPS65912_DEVCTRL2		0x25
+#define TPS65912_I2C_SPI_CFG		0x26
+#define TPS65912_KEEP_ON		0x27
+#define TPS65912_KEEP_ON2		0x28
+#define TPS65912_SET_OFF1		0x29
+#define TPS65912_SET_OFF2		0x2A
+#define TPS65912_DEF_VOLT		0x2B
+#define TPS65912_DEF_VOLT_MAPPING	0x2C
+#define TPS65912_DISCHARGE		0x2D
+#define TPS65912_DISCHARGE2		0x2E
+#define TPS65912_EN1_SET1		0x2F
+#define TPS65912_EN1_SET2		0x30
+#define TPS65912_EN2_SET1		0x31
+#define TPS65912_EN2_SET2		0x32
+#define TPS65912_EN3_SET1		0x33
+#define TPS65912_EN3_SET2		0x34
+#define TPS65912_EN4_SET1		0x35
+#define TPS65912_EN4_SET2		0x36
+#define TPS65912_PGOOD			0x37
+#define TPS65912_PGOOD2			0x38
+#define TPS65912_INT_STS		0x39
+#define TPS65912_INT_MSK		0x3A
+#define TPS65912_INT_STS2		0x3B
+#define TPS65912_INT_MSK2		0x3C
+#define TPS65912_INT_STS3		0x3D
+#define TPS65912_INT_MSK3		0x3E
+#define TPS65912_INT_STS4		0x3F
+#define TPS65912_INT_MSK4		0x40
+#define TPS65912_GPIO1			0x41
+#define TPS65912_GPIO2			0x42
+#define TPS65912_GPIO3			0x43
+#define TPS65912_GPIO4			0x44
+#define TPS65912_GPIO5			0x45
+#define TPS65912_VMON			0x46
+#define TPS65912_LEDA_CTRL1		0x47
+#define TPS65912_LEDA_CTRL2		0x48
+#define TPS65912_LEDA_CTRL3		0x49
+#define TPS65912_LEDA_CTRL4		0x4A
+#define TPS65912_LEDA_CTRL5		0x4B
+#define TPS65912_LEDA_CTRL6		0x4C
+#define TPS65912_LEDA_CTRL7		0x4D
+#define TPS65912_LEDA_CTRL8		0x4E
+#define TPS65912_LEDB_CTRL1		0x4F
+#define TPS65912_LEDB_CTRL2		0x50
+#define TPS65912_LEDB_CTRL3		0x51
+#define TPS65912_LEDB_CTRL4		0x52
+#define TPS65912_LEDB_CTRL5		0x53
+#define TPS65912_LEDB_CTRL6		0x54
+#define TPS65912_LEDB_CTRL7		0x55
+#define TPS65912_LEDB_CTRL8		0x56
+#define TPS65912_LEDC_CTRL1		0x57
+#define TPS65912_LEDC_CTRL2		0x58
+#define TPS65912_LEDC_CTRL3		0x59
+#define TPS65912_LEDC_CTRL4		0x5A
+#define TPS65912_LEDC_CTRL5		0x5B
+#define TPS65912_LEDC_CTRL6		0x5C
+#define TPS65912_LEDC_CTRL7		0x5D
+#define TPS65912_LEDC_CTRL8		0x5E
+#define TPS65912_LED_RAMP_UP_TIME	0x5F
+#define TPS65912_LED_RAMP_DOWN_TIME	0x60
+#define TPS65912_LED_SEQ_EN		0x61
+#define TPS65912_LOADSWITCH		0x62
+#define TPS65912_SPARE			0x63
+#define TPS65912_VERNUM			0x64
+#define TPS6591X_MAX_REGISTER		0x64
+
+/* IRQ Definitions */
+#define TPS65912_IRQ_PWRHOLD_F		0
+#define TPS65912_IRQ_VMON		1
+#define TPS65912_IRQ_PWRON		2
+#define TPS65912_IRQ_PWRON_LP		3
+#define TPS65912_IRQ_PWRHOLD_R		4
+#define TPS65912_IRQ_HOTDIE		5
+#define TPS65912_IRQ_GPIO1_R		6
+#define TPS65912_IRQ_GPIO1_F		7
+#define TPS65912_IRQ_GPIO2_R		8
+#define TPS65912_IRQ_GPIO2_F		9
+#define TPS65912_IRQ_GPIO3_R		10
+#define TPS65912_IRQ_GPIO3_F		11
+#define TPS65912_IRQ_GPIO4_R		12
+#define TPS65912_IRQ_GPIO4_F		13
+#define TPS65912_IRQ_GPIO5_R		14
+#define TPS65912_IRQ_GPIO5_F		15
+#define TPS65912_IRQ_PGOOD_DCDC1	16
+#define TPS65912_IRQ_PGOOD_DCDC2	17
+#define TPS65912_IRQ_PGOOD_DCDC3	18
+#define TPS65912_IRQ_PGOOD_DCDC4	19
+#define TPS65912_IRQ_PGOOD_LDO1		20
+#define TPS65912_IRQ_PGOOD_LDO2		21
+#define TPS65912_IRQ_PGOOD_LDO3		22
+#define TPS65912_IRQ_PGOOD_LDO4		23
+#define TPS65912_IRQ_PGOOD_LDO5		24
+#define TPS65912_IRQ_PGOOD_LDO6		25
+#define TPS65912_IRQ_PGOOD_LDO7		26
+#define TPS65912_IRQ_PGOOD_LD08		27
+#define TPS65912_IRQ_PGOOD_LDO9		28
+#define TPS65912_IRQ_PGOOD_LDO10	29
+
+#define TPS65912_NUM_IRQ		30
+
+/* GPIO 1 and 2 Register Definitions */
+#define GPIO_SLEEP_MASK			0x80
+#define GPIO_SLEEP_SHIFT		7
+#define GPIO_DEB_MASK			0x10
+#define GPIO_DEB_SHIFT			4
+#define GPIO_CFG_MASK			0x04
+#define GPIO_CFG_SHIFT			2
+#define GPIO_STS_MASK			0x02
+#define GPIO_STS_SHIFT			1
+#define GPIO_SET_MASK			0x01
+#define GPIO_SET_SHIFT			0
+
+/* GPIO 3 Register Definitions */
+#define GPIO3_SLEEP_MASK		0x80
+#define GPIO3_SLEEP_SHIFT		7
+#define GPIO3_SEL_MASK			0x40
+#define GPIO3_SEL_SHIFT			6
+#define GPIO3_ODEN_MASK			0x20
+#define GPIO3_ODEN_SHIFT		5
+#define GPIO3_DEB_MASK			0x10
+#define GPIO3_DEB_SHIFT			4
+#define GPIO3_PDEN_MASK			0x08
+#define GPIO3_PDEN_SHIFT		3
+#define GPIO3_CFG_MASK			0x04
+#define GPIO3_CFG_SHIFT			2
+#define GPIO3_STS_MASK			0x02
+#define GPIO3_STS_SHIFT			1
+#define GPIO3_SET_MASK			0x01
+#define GPIO3_SET_SHIFT			0
+
+/* GPIO 4 Register Definitions */
+#define GPIO4_SLEEP_MASK		0x80
+#define GPIO4_SLEEP_SHIFT		7
+#define GPIO4_SEL_MASK			0x40
+#define GPIO4_SEL_SHIFT			6
+#define GPIO4_ODEN_MASK			0x20
+#define GPIO4_ODEN_SHIFT		5
+#define GPIO4_DEB_MASK			0x10
+#define GPIO4_DEB_SHIFT			4
+#define GPIO4_PDEN_MASK			0x08
+#define GPIO4_PDEN_SHIFT		3
+#define GPIO4_CFG_MASK			0x04
+#define GPIO4_CFG_SHIFT			2
+#define GPIO4_STS_MASK			0x02
+#define GPIO4_STS_SHIFT			1
+#define GPIO4_SET_MASK			0x01
+#define GPIO4_SET_SHIFT			0
+
+/* Register THERM  (0x80) register.RegisterDescription */
+#define THERM_THERM_HD_MASK		0x20
+#define THERM_THERM_HD_SHIFT		5
+#define THERM_THERM_TS_MASK		0x10
+#define THERM_THERM_TS_SHIFT		4
+#define THERM_THERM_HDSEL_MASK		0x0C
+#define THERM_THERM_HDSEL_SHIFT		2
+#define THERM_RSVD1_MASK		0x02
+#define THERM_RSVD1_SHIFT		1
+#define THERM_THERM_STATE_MASK		0x01
+#define THERM_THERM_STATE_SHIFT		0
+
+/* Register DCDCCTRL1 register.RegisterDescription */
+#define DCDCCTRL_VCON_ENABLE_MASK	0x80
+#define DCDCCTRL_VCON_ENABLE_SHIFT	7
+#define DCDCCTRL_VCON_RANGE1_MASK	0x40
+#define DCDCCTRL_VCON_RANGE1_SHIFT	6
+#define DCDCCTRL_VCON_RANGE0_MASK	0x20
+#define DCDCCTRL_VCON_RANGE0_SHIFT	5
+#define DCDCCTRL_TSTEP2_MASK		0x10
+#define DCDCCTRL_TSTEP2_SHIFT		4
+#define DCDCCTRL_TSTEP1_MASK		0x08
+#define DCDCCTRL_TSTEP1_SHIFT		3
+#define DCDCCTRL_TSTEP0_MASK		0x04
+#define DCDCCTRL_TSTEP0_SHIFT		2
+#define DCDCCTRL_DCDC1_MODE_MASK	0x02
+#define DCDCCTRL_DCDC1_MODE_SHIFT	1
+
+/* Register DCDCCTRL2 and DCDCCTRL3 register.RegisterDescription */
+#define DCDCCTRL_TSTEP2_MASK		0x10
+#define DCDCCTRL_TSTEP2_SHIFT		4
+#define DCDCCTRL_TSTEP1_MASK		0x08
+#define DCDCCTRL_TSTEP1_SHIFT		3
+#define DCDCCTRL_TSTEP0_MASK		0x04
+#define DCDCCTRL_TSTEP0_SHIFT		2
+#define DCDCCTRL_DCDC_MODE_MASK		0x02
+#define DCDCCTRL_DCDC_MODE_SHIFT	1
+#define DCDCCTRL_RSVD0_MASK		0x01
+#define DCDCCTRL_RSVD0_SHIFT		0
+
+/* Register DCDCCTRL4 register.RegisterDescription */
+#define DCDCCTRL_RAMP_TIME_MASK		0x01
+#define DCDCCTRL_RAMP_TIME_SHIFT	0
+
+/* Register DCDCx_AVS */
+#define DCDC_AVS_ENABLE_MASK		0x80
+#define DCDC_AVS_ENABLE_SHIFT		7
+#define DCDC_AVS_ECO_MASK		0x40
+#define DCDC_AVS_ECO_SHIFT		6
+
+/* Register DCDCx_LIMIT */
+#define DCDC_LIMIT_RANGE_MASK		0xC0
+#define DCDC_LIMIT_RANGE_SHIFT		6
+#define DCDC_LIMIT_MAX_SEL_MASK		0x3F
+#define DCDC_LIMIT_MAX_SEL_SHIFT	0
+
+/**
+ * struct tps65912_board
+ * Board platform dat may be used to initialize regulators.
+ */
+struct tps65912_board {
+	int is_dcdc1_avs;
+	int is_dcdc2_avs;
+	int is_dcdc3_avs;
+	int is_dcdc4_avs;
+	int irq;
+	int irq_base;
+	int gpio_base;
+	struct regulator_init_data *tps65912_pmic_init_data;
+};
+
+/**
+ * struct tps65912 - tps65912 sub-driver chip access routines
+ */
+
+struct tps65912 {
+	struct device *dev;
+	/* for read/write acces */
+	struct mutex io_mutex;
+
+	/* For device IO interfaces: I2C or SPI */
+	void *control_data;
+
+	int (*read)(struct tps65912 *tps65912, u8 reg, int size, void *dest);
+	int (*write)(struct tps65912 *tps65912, u8 reg, int size, void *src);
+
+	/* Client devices */
+	struct tps65912_pmic *pmic;
+
+	/* GPIO Handling */
+	struct gpio_chip gpio;
+
+	/* IRQ Handling */
+	struct mutex irq_lock;
+	int chip_irq;
+	int irq_base;
+	int irq_num;
+	u32 irq_mask;
+};
+
+struct tps65912_platform_data {
+	int irq;
+	int irq_base;
+};
+
+unsigned int tps_chip(void);
+
+int tps65912_set_bits(struct tps65912 *tps65912, u8 reg, u8 mask);
+int tps65912_clear_bits(struct tps65912 *tps65912, u8 reg, u8 mask);
+int tps65912_reg_read(struct tps65912 *tps65912, u8 reg);
+int tps65912_reg_write(struct tps65912 *tps65912, u8 reg, u8 val);
+int tps65912_device_init(struct tps65912 *tps65912);
+void tps65912_device_exit(struct tps65912 *tps65912);
+int tps65912_irq_init(struct tps65912 *tps65912, int irq,
+			struct tps65912_platform_data *pdata);
+
+#endif /*  __LINUX_MFD_TPS65912_H */
diff --git a/include/linux/mfd/twl4030-audio.h b/include/linux/mfd/twl4030-audio.h
new file mode 100644
index 00000000..3d22b72d
--- /dev/null
+++ b/include/linux/mfd/twl4030-audio.h
@@ -0,0 +1,272 @@
+/*
+ * MFD driver for twl4030 audio submodule
+ *
+ * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+ *
+ * Copyright:   (C) 2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __TWL4030_CODEC_H__
+#define __TWL4030_CODEC_H__
+
+/* Codec registers */
+#define TWL4030_REG_CODEC_MODE		0x01
+#define TWL4030_REG_OPTION		0x02
+#define TWL4030_REG_UNKNOWN		0x03
+#define TWL4030_REG_MICBIAS_CTL		0x04
+#define TWL4030_REG_ANAMICL		0x05
+#define TWL4030_REG_ANAMICR		0x06
+#define TWL4030_REG_AVADC_CTL		0x07
+#define TWL4030_REG_ADCMICSEL		0x08
+#define TWL4030_REG_DIGMIXING		0x09
+#define TWL4030_REG_ATXL1PGA		0x0A
+#define TWL4030_REG_ATXR1PGA		0x0B
+#define TWL4030_REG_AVTXL2PGA		0x0C
+#define TWL4030_REG_AVTXR2PGA		0x0D
+#define TWL4030_REG_AUDIO_IF		0x0E
+#define TWL4030_REG_VOICE_IF		0x0F
+#define TWL4030_REG_ARXR1PGA		0x10
+#define TWL4030_REG_ARXL1PGA		0x11
+#define TWL4030_REG_ARXR2PGA		0x12
+#define TWL4030_REG_ARXL2PGA		0x13
+#define TWL4030_REG_VRXPGA		0x14
+#define TWL4030_REG_VSTPGA		0x15
+#define TWL4030_REG_VRX2ARXPGA		0x16
+#define TWL4030_REG_AVDAC_CTL		0x17
+#define TWL4030_REG_ARX2VTXPGA		0x18
+#define TWL4030_REG_ARXL1_APGA_CTL	0x19
+#define TWL4030_REG_ARXR1_APGA_CTL	0x1A
+#define TWL4030_REG_ARXL2_APGA_CTL	0x1B
+#define TWL4030_REG_ARXR2_APGA_CTL	0x1C
+#define TWL4030_REG_ATX2ARXPGA		0x1D
+#define TWL4030_REG_BT_IF		0x1E
+#define TWL4030_REG_BTPGA		0x1F
+#define TWL4030_REG_BTSTPGA		0x20
+#define TWL4030_REG_EAR_CTL		0x21
+#define TWL4030_REG_HS_SEL		0x22
+#define TWL4030_REG_HS_GAIN_SET		0x23
+#define TWL4030_REG_HS_POPN_SET		0x24
+#define TWL4030_REG_PREDL_CTL		0x25
+#define TWL4030_REG_PREDR_CTL		0x26
+#define TWL4030_REG_PRECKL_CTL		0x27
+#define TWL4030_REG_PRECKR_CTL		0x28
+#define TWL4030_REG_HFL_CTL		0x29
+#define TWL4030_REG_HFR_CTL		0x2A
+#define TWL4030_REG_ALC_CTL		0x2B
+#define TWL4030_REG_ALC_SET1		0x2C
+#define TWL4030_REG_ALC_SET2		0x2D
+#define TWL4030_REG_BOOST_CTL		0x2E
+#define TWL4030_REG_SOFTVOL_CTL		0x2F
+#define TWL4030_REG_DTMF_FREQSEL	0x30
+#define TWL4030_REG_DTMF_TONEXT1H	0x31
+#define TWL4030_REG_DTMF_TONEXT1L	0x32
+#define TWL4030_REG_DTMF_TONEXT2H	0x33
+#define TWL4030_REG_DTMF_TONEXT2L	0x34
+#define TWL4030_REG_DTMF_TONOFF		0x35
+#define TWL4030_REG_DTMF_WANONOFF	0x36
+#define TWL4030_REG_I2S_RX_SCRAMBLE_H	0x37
+#define TWL4030_REG_I2S_RX_SCRAMBLE_M	0x38
+#define TWL4030_REG_I2S_RX_SCRAMBLE_L	0x39
+#define TWL4030_REG_APLL_CTL		0x3A
+#define TWL4030_REG_DTMF_CTL		0x3B
+#define TWL4030_REG_DTMF_PGA_CTL2	0x3C
+#define TWL4030_REG_DTMF_PGA_CTL1	0x3D
+#define TWL4030_REG_MISC_SET_1		0x3E
+#define TWL4030_REG_PCMBTMUX		0x3F
+#define TWL4030_REG_RX_PATH_SEL		0x43
+#define TWL4030_REG_VDL_APGA_CTL	0x44
+#define TWL4030_REG_VIBRA_CTL		0x45
+#define TWL4030_REG_VIBRA_SET		0x46
+#define TWL4030_REG_VIBRA_PWM_SET	0x47
+#define TWL4030_REG_ANAMIC_GAIN		0x48
+#define TWL4030_REG_MISC_SET_2		0x49
+
+/* Bitfield Definitions */
+
+/* TWL4030_CODEC_MODE (0x01) Fields */
+#define TWL4030_APLL_RATE		0xF0
+#define TWL4030_APLL_RATE_8000		0x00
+#define TWL4030_APLL_RATE_11025		0x10
+#define TWL4030_APLL_RATE_12000		0x20
+#define TWL4030_APLL_RATE_16000		0x40
+#define TWL4030_APLL_RATE_22050		0x50
+#define TWL4030_APLL_RATE_24000		0x60
+#define TWL4030_APLL_RATE_32000		0x80
+#define TWL4030_APLL_RATE_44100		0x90
+#define TWL4030_APLL_RATE_48000		0xA0
+#define TWL4030_APLL_RATE_96000		0xE0
+#define TWL4030_SEL_16K			0x08
+#define TWL4030_CODECPDZ		0x02
+#define TWL4030_OPT_MODE		0x01
+#define TWL4030_OPTION_1		(1 << 0)
+#define TWL4030_OPTION_2		(0 << 0)
+
+/* TWL4030_OPTION (0x02) Fields */
+#define TWL4030_ATXL1_EN		(1 << 0)
+#define TWL4030_ATXR1_EN		(1 << 1)
+#define TWL4030_ATXL2_VTXL_EN		(1 << 2)
+#define TWL4030_ATXR2_VTXR_EN		(1 << 3)
+#define TWL4030_ARXL1_VRX_EN		(1 << 4)
+#define TWL4030_ARXR1_EN		(1 << 5)
+#define TWL4030_ARXL2_EN		(1 << 6)
+#define TWL4030_ARXR2_EN		(1 << 7)
+
+/* TWL4030_REG_MICBIAS_CTL (0x04) Fields */
+#define TWL4030_MICBIAS2_CTL		0x40
+#define TWL4030_MICBIAS1_CTL		0x20
+#define TWL4030_HSMICBIAS_EN		0x04
+#define TWL4030_MICBIAS2_EN		0x02
+#define TWL4030_MICBIAS1_EN		0x01
+
+/* ANAMICL (0x05) Fields */
+#define TWL4030_CNCL_OFFSET_START	0x80
+#define TWL4030_OFFSET_CNCL_SEL		0x60
+#define TWL4030_OFFSET_CNCL_SEL_ARX1	0x00
+#define TWL4030_OFFSET_CNCL_SEL_ARX2	0x20
+#define TWL4030_OFFSET_CNCL_SEL_VRX	0x40
+#define TWL4030_OFFSET_CNCL_SEL_ALL	0x60
+#define TWL4030_MICAMPL_EN		0x10
+#define TWL4030_CKMIC_EN		0x08
+#define TWL4030_AUXL_EN			0x04
+#define TWL4030_HSMIC_EN		0x02
+#define TWL4030_MAINMIC_EN		0x01
+
+/* ANAMICR (0x06) Fields */
+#define TWL4030_MICAMPR_EN		0x10
+#define TWL4030_AUXR_EN			0x04
+#define TWL4030_SUBMIC_EN		0x01
+
+/* AVADC_CTL (0x07) Fields */
+#define TWL4030_ADCL_EN			0x08
+#define TWL4030_AVADC_CLK_PRIORITY	0x04
+#define TWL4030_ADCR_EN			0x02
+
+/* TWL4030_REG_ADCMICSEL (0x08) Fields */
+#define TWL4030_DIGMIC1_EN		0x08
+#define TWL4030_TX2IN_SEL		0x04
+#define TWL4030_DIGMIC0_EN		0x02
+#define TWL4030_TX1IN_SEL		0x01
+
+/* AUDIO_IF (0x0E) Fields */
+#define TWL4030_AIF_SLAVE_EN		0x80
+#define TWL4030_DATA_WIDTH		0x60
+#define TWL4030_DATA_WIDTH_16S_16W	0x00
+#define TWL4030_DATA_WIDTH_32S_16W	0x40
+#define TWL4030_DATA_WIDTH_32S_24W	0x60
+#define TWL4030_AIF_FORMAT		0x18
+#define TWL4030_AIF_FORMAT_CODEC	0x00
+#define TWL4030_AIF_FORMAT_LEFT		0x08
+#define TWL4030_AIF_FORMAT_RIGHT	0x10
+#define TWL4030_AIF_FORMAT_TDM		0x18
+#define TWL4030_AIF_TRI_EN		0x04
+#define TWL4030_CLK256FS_EN		0x02
+#define TWL4030_AIF_EN			0x01
+
+/* VOICE_IF (0x0F) Fields */
+#define TWL4030_VIF_SLAVE_EN		0x80
+#define TWL4030_VIF_DIN_EN		0x40
+#define TWL4030_VIF_DOUT_EN		0x20
+#define TWL4030_VIF_SWAP		0x10
+#define TWL4030_VIF_FORMAT		0x08
+#define TWL4030_VIF_TRI_EN		0x04
+#define TWL4030_VIF_SUB_EN		0x02
+#define TWL4030_VIF_EN			0x01
+
+/* EAR_CTL (0x21) */
+#define TWL4030_EAR_GAIN		0x30
+
+/* HS_GAIN_SET (0x23) Fields */
+#define TWL4030_HSR_GAIN		0x0C
+#define TWL4030_HSR_GAIN_PWR_DOWN	0x00
+#define TWL4030_HSR_GAIN_PLUS_6DB	0x04
+#define TWL4030_HSR_GAIN_0DB		0x08
+#define TWL4030_HSR_GAIN_MINUS_6DB	0x0C
+#define TWL4030_HSL_GAIN		0x03
+#define TWL4030_HSL_GAIN_PWR_DOWN	0x00
+#define TWL4030_HSL_GAIN_PLUS_6DB	0x01
+#define TWL4030_HSL_GAIN_0DB		0x02
+#define TWL4030_HSL_GAIN_MINUS_6DB	0x03
+
+/* HS_POPN_SET (0x24) Fields */
+#define TWL4030_VMID_EN			0x40
+#define	TWL4030_EXTMUTE			0x20
+#define TWL4030_RAMP_DELAY		0x1C
+#define TWL4030_RAMP_DELAY_20MS		0x00
+#define TWL4030_RAMP_DELAY_40MS		0x04
+#define TWL4030_RAMP_DELAY_81MS		0x08
+#define TWL4030_RAMP_DELAY_161MS	0x0C
+#define TWL4030_RAMP_DELAY_323MS	0x10
+#define TWL4030_RAMP_DELAY_645MS	0x14
+#define TWL4030_RAMP_DELAY_1291MS	0x18
+#define TWL4030_RAMP_DELAY_2581MS	0x1C
+#define TWL4030_RAMP_EN			0x02
+
+/* PREDL_CTL (0x25) */
+#define TWL4030_PREDL_GAIN		0x30
+
+/* PREDR_CTL (0x26) */
+#define TWL4030_PREDR_GAIN		0x30
+
+/* PRECKL_CTL (0x27) */
+#define TWL4030_PRECKL_GAIN		0x30
+
+/* PRECKR_CTL (0x28) */
+#define TWL4030_PRECKR_GAIN		0x30
+
+/* HFL_CTL (0x29, 0x2A) Fields */
+#define TWL4030_HF_CTL_HB_EN		0x04
+#define TWL4030_HF_CTL_LOOP_EN		0x08
+#define TWL4030_HF_CTL_RAMP_EN		0x10
+#define TWL4030_HF_CTL_REF_EN		0x20
+
+/* APLL_CTL (0x3A) Fields */
+#define TWL4030_APLL_EN			0x10
+#define TWL4030_APLL_INFREQ		0x0F
+#define TWL4030_APLL_INFREQ_19200KHZ	0x05
+#define TWL4030_APLL_INFREQ_26000KHZ	0x06
+#define TWL4030_APLL_INFREQ_38400KHZ	0x0F
+
+/* REG_MISC_SET_1 (0x3E) Fields */
+#define TWL4030_CLK64_EN		0x80
+#define TWL4030_SCRAMBLE_EN		0x40
+#define TWL4030_FMLOOP_EN		0x20
+#define TWL4030_SMOOTH_ANAVOL_EN	0x02
+#define TWL4030_DIGMIC_LR_SWAP_EN	0x01
+
+/* VIBRA_CTL (0x45) */
+#define TWL4030_VIBRA_EN		0x01
+#define TWL4030_VIBRA_DIR		0x02
+#define TWL4030_VIBRA_AUDIO_SEL_L1	(0x00 << 2)
+#define TWL4030_VIBRA_AUDIO_SEL_R1	(0x01 << 2)
+#define TWL4030_VIBRA_AUDIO_SEL_L2	(0x02 << 2)
+#define TWL4030_VIBRA_AUDIO_SEL_R2	(0x03 << 2)
+#define TWL4030_VIBRA_SEL		0x10
+#define TWL4030_VIBRA_DIR_SEL		0x20
+
+/* TWL4030 codec resource IDs */
+enum twl4030_audio_res {
+	TWL4030_AUDIO_RES_POWER = 0,
+	TWL4030_AUDIO_RES_APLL,
+	TWL4030_AUDIO_RES_MAX,
+};
+
+int twl4030_audio_disable_resource(enum twl4030_audio_res id);
+int twl4030_audio_enable_resource(enum twl4030_audio_res id);
+unsigned int twl4030_audio_get_mclk(void);
+
+#endif	/* End of __TWL4030_CODEC_H__ */
diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h
new file mode 100644
index 00000000..b15b5f03
--- /dev/null
+++ b/include/linux/mfd/twl6040.h
@@ -0,0 +1,251 @@
+/*
+ * MFD driver for twl6040
+ *
+ * Authors:     Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
+ *              Misael Lopez Cruz <misael.lopez@ti.com>
+ *
+ * Copyright:   (C) 2011 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __TWL6040_CODEC_H__
+#define __TWL6040_CODEC_H__
+
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+
+#define TWL6040_REG_ASICID		0x01
+#define TWL6040_REG_ASICREV		0x02
+#define TWL6040_REG_INTID		0x03
+#define TWL6040_REG_INTMR		0x04
+#define TWL6040_REG_NCPCTL		0x05
+#define TWL6040_REG_LDOCTL		0x06
+#define TWL6040_REG_HPPLLCTL		0x07
+#define TWL6040_REG_LPPLLCTL		0x08
+#define TWL6040_REG_LPPLLDIV		0x09
+#define TWL6040_REG_AMICBCTL		0x0A
+#define TWL6040_REG_DMICBCTL		0x0B
+#define TWL6040_REG_MICLCTL		0x0C
+#define TWL6040_REG_MICRCTL		0x0D
+#define TWL6040_REG_MICGAIN		0x0E
+#define TWL6040_REG_LINEGAIN		0x0F
+#define TWL6040_REG_HSLCTL		0x10
+#define TWL6040_REG_HSRCTL		0x11
+#define TWL6040_REG_HSGAIN		0x12
+#define TWL6040_REG_EARCTL		0x13
+#define TWL6040_REG_HFLCTL		0x14
+#define TWL6040_REG_HFLGAIN		0x15
+#define TWL6040_REG_HFRCTL		0x16
+#define TWL6040_REG_HFRGAIN		0x17
+#define TWL6040_REG_VIBCTLL		0x18
+#define TWL6040_REG_VIBDATL		0x19
+#define TWL6040_REG_VIBCTLR		0x1A
+#define TWL6040_REG_VIBDATR		0x1B
+#define TWL6040_REG_HKCTL1		0x1C
+#define TWL6040_REG_HKCTL2		0x1D
+#define TWL6040_REG_GPOCTL		0x1E
+#define TWL6040_REG_ALB			0x1F
+#define TWL6040_REG_DLB			0x20
+#define TWL6040_REG_TRIM1		0x28
+#define TWL6040_REG_TRIM2		0x29
+#define TWL6040_REG_TRIM3		0x2A
+#define TWL6040_REG_HSOTRIM		0x2B
+#define TWL6040_REG_HFOTRIM		0x2C
+#define TWL6040_REG_ACCCTL		0x2D
+#define TWL6040_REG_STATUS		0x2E
+
+/* INTID (0x03) fields */
+
+#define TWL6040_THINT			0x01
+#define TWL6040_PLUGINT			0x02
+#define TWL6040_UNPLUGINT		0x04
+#define TWL6040_HOOKINT			0x08
+#define TWL6040_HFINT			0x10
+#define TWL6040_VIBINT			0x20
+#define TWL6040_READYINT		0x40
+
+/* INTMR (0x04) fields */
+
+#define TWL6040_THMSK			0x01
+#define TWL6040_PLUGMSK			0x02
+#define TWL6040_HOOKMSK			0x08
+#define TWL6040_HFMSK			0x10
+#define TWL6040_VIBMSK			0x20
+#define TWL6040_READYMSK		0x40
+#define TWL6040_ALLINT_MSK		0x7B
+
+/* NCPCTL (0x05) fields */
+
+#define TWL6040_NCPENA			0x01
+#define TWL6040_NCPOPEN			0x40
+
+/* LDOCTL (0x06) fields */
+
+#define TWL6040_LSLDOENA		0x01
+#define TWL6040_HSLDOENA		0x04
+#define TWL6040_REFENA			0x40
+#define TWL6040_OSCENA			0x80
+
+/* HPPLLCTL (0x07) fields */
+
+#define TWL6040_HPLLENA			0x01
+#define TWL6040_HPLLRST			0x02
+#define TWL6040_HPLLBP			0x04
+#define TWL6040_HPLLSQRENA		0x08
+#define TWL6040_MCLK_12000KHZ		(0 << 5)
+#define TWL6040_MCLK_19200KHZ		(1 << 5)
+#define TWL6040_MCLK_26000KHZ		(2 << 5)
+#define TWL6040_MCLK_38400KHZ		(3 << 5)
+#define TWL6040_MCLK_MSK		0x60
+
+/* LPPLLCTL (0x08) fields */
+
+#define TWL6040_LPLLENA			0x01
+#define TWL6040_LPLLRST			0x02
+#define TWL6040_LPLLSEL			0x04
+#define TWL6040_LPLLFIN			0x08
+#define TWL6040_HPLLSEL			0x10
+
+/* HSLCTL/R (0x10/0x11) fields */
+
+#define TWL6040_HSDACENA		(1 << 0)
+#define TWL6040_HSDACMODE		(1 << 1)
+#define TWL6040_HSDRVMODE		(1 << 3)
+
+/* VIBCTLL/R (0x18/0x1A) fields */
+
+#define TWL6040_VIBENA			(1 << 0)
+#define TWL6040_VIBSEL			(1 << 1)
+#define TWL6040_VIBCTRL			(1 << 2)
+#define TWL6040_VIBCTRL_P		(1 << 3)
+#define TWL6040_VIBCTRL_N		(1 << 4)
+
+/* VIBDATL/R (0x19/0x1B) fields */
+
+#define TWL6040_VIBDAT_MAX		0x64
+
+/* GPOCTL (0x1E) fields */
+
+#define TWL6040_GPO1			0x01
+#define TWL6040_GPO2			0x02
+#define TWL6040_GPO3			0x03
+
+/* ACCCTL (0x2D) fields */
+
+#define TWL6040_I2CSEL			0x01
+#define TWL6040_RESETSPLIT		0x04
+#define TWL6040_INTCLRMODE		0x08
+
+/* STATUS (0x2E) fields */
+
+#define TWL6040_PLUGCOMP		0x02
+#define TWL6040_VIBLOCDET		0x10
+#define TWL6040_VIBROCDET		0x20
+#define TWL6040_TSHUTDET                0x40
+
+#define TWL6040_CELLS			2
+
+#define TWL6040_REV_ES1_0		0x00
+#define TWL6040_REV_ES1_1		0x01
+#define TWL6040_REV_ES1_2		0x02
+
+#define TWL6040_IRQ_TH			0
+#define TWL6040_IRQ_PLUG		1
+#define TWL6040_IRQ_HOOK		2
+#define TWL6040_IRQ_HF			3
+#define TWL6040_IRQ_VIB			4
+#define TWL6040_IRQ_READY		5
+
+/* PLL selection */
+#define TWL6040_SYSCLK_SEL_LPPLL	0
+#define TWL6040_SYSCLK_SEL_HPPLL	1
+
+struct twl6040_codec_data {
+	u16 hs_left_step;
+	u16 hs_right_step;
+	u16 hf_left_step;
+	u16 hf_right_step;
+};
+
+struct twl6040_vibra_data {
+	unsigned int vibldrv_res;	/* left driver resistance */
+	unsigned int vibrdrv_res;	/* right driver resistance */
+	unsigned int viblmotor_res;	/* left motor resistance */
+	unsigned int vibrmotor_res;	/* right motor resistance */
+	int vddvibl_uV;			/* VDDVIBL volt, set 0 for fixed reg */
+	int vddvibr_uV;			/* VDDVIBR volt, set 0 for fixed reg */
+};
+
+struct twl6040_platform_data {
+	int audpwron_gpio;	/* audio power-on gpio */
+	unsigned int irq_base;
+
+	struct twl6040_codec_data *codec;
+	struct twl6040_vibra_data *vibra;
+};
+
+struct regmap;
+
+struct twl6040 {
+	struct device *dev;
+	struct regmap *regmap;
+	struct mutex mutex;
+	struct mutex io_mutex;
+	struct mutex irq_mutex;
+	struct mfd_cell cells[TWL6040_CELLS];
+	struct completion ready;
+
+	int audpwron;
+	int power_count;
+	int rev;
+	u8 vibra_ctrl_cache[2];
+
+	/* PLL configuration */
+	int pll;
+	unsigned int sysclk;
+	unsigned int mclk;
+
+	unsigned int irq;
+	unsigned int irq_base;
+	u8 irq_masks_cur;
+	u8 irq_masks_cache;
+};
+
+int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg);
+int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg,
+		      u8 val);
+int twl6040_set_bits(struct twl6040 *twl6040, unsigned int reg,
+		     u8 mask);
+int twl6040_clear_bits(struct twl6040 *twl6040, unsigned int reg,
+		       u8 mask);
+int twl6040_power(struct twl6040 *twl6040, int on);
+int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
+		    unsigned int freq_in, unsigned int freq_out);
+int twl6040_get_pll(struct twl6040 *twl6040);
+unsigned int twl6040_get_sysclk(struct twl6040 *twl6040);
+int twl6040_irq_init(struct twl6040 *twl6040);
+void twl6040_irq_exit(struct twl6040 *twl6040);
+/* Get the combined status of the vibra control register */
+int twl6040_get_vibralr_status(struct twl6040 *twl6040);
+
+static inline int twl6040_get_revid(struct twl6040 *twl6040)
+{
+	return twl6040->rev;
+}
+
+
+#endif  /* End of __TWL6040_CODEC_H__ */
diff --git a/include/linux/mfd/ucb1x00.h b/include/linux/mfd/ucb1x00.h
new file mode 100644
index 00000000..28af4175
--- /dev/null
+++ b/include/linux/mfd/ucb1x00.h
@@ -0,0 +1,259 @@
+/*
+ *  linux/include/mfd/ucb1x00.h
+ *
+ *  Copyright (C) 2001 Russell King, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+#ifndef UCB1200_H
+#define UCB1200_H
+
+#include <linux/mfd/mcp.h>
+#include <linux/gpio.h>
+#include <linux/mutex.h>
+
+#define UCB_IO_DATA	0x00
+#define UCB_IO_DIR	0x01
+
+#define UCB_IO_0		(1 << 0)
+#define UCB_IO_1		(1 << 1)
+#define UCB_IO_2		(1 << 2)
+#define UCB_IO_3		(1 << 3)
+#define UCB_IO_4		(1 << 4)
+#define UCB_IO_5		(1 << 5)
+#define UCB_IO_6		(1 << 6)
+#define UCB_IO_7		(1 << 7)
+#define UCB_IO_8		(1 << 8)
+#define UCB_IO_9		(1 << 9)
+
+#define UCB_IE_RIS	0x02
+#define UCB_IE_FAL	0x03
+#define UCB_IE_STATUS	0x04
+#define UCB_IE_CLEAR	0x04
+#define UCB_IE_ADC		(1 << 11)
+#define UCB_IE_TSPX		(1 << 12)
+#define UCB_IE_TSMX		(1 << 13)
+#define UCB_IE_TCLIP		(1 << 14)
+#define UCB_IE_ACLIP		(1 << 15)
+
+#define UCB_IRQ_TSPX		12
+
+#define UCB_TC_A	0x05
+#define UCB_TC_A_LOOP		(1 << 7)	/* UCB1200 */
+#define UCB_TC_A_AMPL		(1 << 7)	/* UCB1300 */
+
+#define UCB_TC_B	0x06
+#define UCB_TC_B_VOICE_ENA	(1 << 3)
+#define UCB_TC_B_CLIP		(1 << 4)
+#define UCB_TC_B_ATT		(1 << 6)
+#define UCB_TC_B_SIDE_ENA	(1 << 11)
+#define UCB_TC_B_MUTE		(1 << 13)
+#define UCB_TC_B_IN_ENA		(1 << 14)
+#define UCB_TC_B_OUT_ENA	(1 << 15)
+
+#define UCB_AC_A	0x07
+#define UCB_AC_B	0x08
+#define UCB_AC_B_LOOP		(1 << 8)
+#define UCB_AC_B_MUTE		(1 << 13)
+#define UCB_AC_B_IN_ENA		(1 << 14)
+#define UCB_AC_B_OUT_ENA	(1 << 15)
+
+#define UCB_TS_CR	0x09
+#define UCB_TS_CR_TSMX_POW	(1 << 0)
+#define UCB_TS_CR_TSPX_POW	(1 << 1)
+#define UCB_TS_CR_TSMY_POW	(1 << 2)
+#define UCB_TS_CR_TSPY_POW	(1 << 3)
+#define UCB_TS_CR_TSMX_GND	(1 << 4)
+#define UCB_TS_CR_TSPX_GND	(1 << 5)
+#define UCB_TS_CR_TSMY_GND	(1 << 6)
+#define UCB_TS_CR_TSPY_GND	(1 << 7)
+#define UCB_TS_CR_MODE_INT	(0 << 8)
+#define UCB_TS_CR_MODE_PRES	(1 << 8)
+#define UCB_TS_CR_MODE_POS	(2 << 8)
+#define UCB_TS_CR_BIAS_ENA	(1 << 11)
+#define UCB_TS_CR_TSPX_LOW	(1 << 12)
+#define UCB_TS_CR_TSMX_LOW	(1 << 13)
+
+#define UCB_ADC_CR	0x0a
+#define UCB_ADC_SYNC_ENA	(1 << 0)
+#define UCB_ADC_VREFBYP_CON	(1 << 1)
+#define UCB_ADC_INP_TSPX	(0 << 2)
+#define UCB_ADC_INP_TSMX	(1 << 2)
+#define UCB_ADC_INP_TSPY	(2 << 2)
+#define UCB_ADC_INP_TSMY	(3 << 2)
+#define UCB_ADC_INP_AD0		(4 << 2)
+#define UCB_ADC_INP_AD1		(5 << 2)
+#define UCB_ADC_INP_AD2		(6 << 2)
+#define UCB_ADC_INP_AD3		(7 << 2)
+#define UCB_ADC_EXT_REF		(1 << 5)
+#define UCB_ADC_START		(1 << 7)
+#define UCB_ADC_ENA		(1 << 15)
+
+#define UCB_ADC_DATA	0x0b
+#define UCB_ADC_DAT_VAL		(1 << 15)
+#define UCB_ADC_DAT(x)		(((x) & 0x7fe0) >> 5)
+
+#define UCB_ID		0x0c
+#define UCB_ID_1200		0x1004
+#define UCB_ID_1300		0x1005
+#define UCB_ID_TC35143          0x9712
+
+#define UCB_MODE	0x0d
+#define UCB_MODE_DYN_VFLAG_ENA	(1 << 12)
+#define UCB_MODE_AUD_OFF_CAN	(1 << 13)
+
+enum ucb1x00_reset {
+	UCB_RST_PROBE,
+	UCB_RST_RESUME,
+	UCB_RST_SUSPEND,
+	UCB_RST_REMOVE,
+	UCB_RST_PROBE_FAIL,
+};
+
+struct ucb1x00_plat_data {
+	void			(*reset)(enum ucb1x00_reset);
+	unsigned		irq_base;
+	int			gpio_base;
+	unsigned		can_wakeup;
+};
+
+struct ucb1x00 {
+	raw_spinlock_t		irq_lock;
+	struct mcp		*mcp;
+	unsigned int		irq;
+	int			irq_base;
+	struct mutex		adc_mutex;
+	spinlock_t		io_lock;
+	u16			id;
+	u16			io_dir;
+	u16			io_out;
+	u16			adc_cr;
+	u16			irq_fal_enbl;
+	u16			irq_ris_enbl;
+	u16			irq_mask;
+	u16			irq_wake;
+	struct device		dev;
+	struct list_head	node;
+	struct list_head	devs;
+	struct gpio_chip 	gpio;
+};
+
+struct ucb1x00_driver;
+
+struct ucb1x00_dev {
+	struct list_head	dev_node;
+	struct list_head	drv_node;
+	struct ucb1x00		*ucb;
+	struct ucb1x00_driver	*drv;
+	void			*priv;
+};
+
+struct ucb1x00_driver {
+	struct list_head	node;
+	struct list_head	devs;
+	int	(*add)(struct ucb1x00_dev *dev);
+	void	(*remove)(struct ucb1x00_dev *dev);
+	int	(*suspend)(struct ucb1x00_dev *dev);
+	int	(*resume)(struct ucb1x00_dev *dev);
+};
+
+#define classdev_to_ucb1x00(cd)	container_of(cd, struct ucb1x00, dev)
+
+int ucb1x00_register_driver(struct ucb1x00_driver *);
+void ucb1x00_unregister_driver(struct ucb1x00_driver *);
+
+/**
+ *	ucb1x00_clkrate - return the UCB1x00 SIB clock rate
+ *	@ucb: UCB1x00 structure describing chip
+ *
+ *	Return the SIB clock rate in Hz.
+ */
+static inline unsigned int ucb1x00_clkrate(struct ucb1x00 *ucb)
+{
+	return mcp_get_sclk_rate(ucb->mcp);
+}
+
+/**
+ *	ucb1x00_enable - enable the UCB1x00 SIB clock
+ *	@ucb: UCB1x00 structure describing chip
+ *
+ *	Enable the SIB clock.  This can be called multiple times.
+ */
+static inline void ucb1x00_enable(struct ucb1x00 *ucb)
+{
+	mcp_enable(ucb->mcp);
+}
+
+/**
+ *	ucb1x00_disable - disable the UCB1x00 SIB clock
+ *	@ucb: UCB1x00 structure describing chip
+ *
+ *	Disable the SIB clock.  The SIB clock will only be disabled
+ *	when the number of ucb1x00_enable calls match the number of
+ *	ucb1x00_disable calls.
+ */
+static inline void ucb1x00_disable(struct ucb1x00 *ucb)
+{
+	mcp_disable(ucb->mcp);
+}
+
+/**
+ *	ucb1x00_reg_write - write a UCB1x00 register
+ *	@ucb: UCB1x00 structure describing chip
+ *	@reg: UCB1x00 4-bit register index to write
+ *	@val: UCB1x00 16-bit value to write
+ *
+ *	Write the UCB1x00 register @reg with value @val.  The SIB
+ *	clock must be running for this function to return.
+ */
+static inline void ucb1x00_reg_write(struct ucb1x00 *ucb, unsigned int reg, unsigned int val)
+{
+	mcp_reg_write(ucb->mcp, reg, val);
+}
+
+/**
+ *	ucb1x00_reg_read - read a UCB1x00 register
+ *	@ucb: UCB1x00 structure describing chip
+ *	@reg: UCB1x00 4-bit register index to write
+ *
+ *	Read the UCB1x00 register @reg and return its value.  The SIB
+ *	clock must be running for this function to return.
+ */
+static inline unsigned int ucb1x00_reg_read(struct ucb1x00 *ucb, unsigned int reg)
+{
+	return mcp_reg_read(ucb->mcp, reg);
+}
+/**
+ *	ucb1x00_set_audio_divisor - 
+ *	@ucb: UCB1x00 structure describing chip
+ *	@div: SIB clock divisor
+ */
+static inline void ucb1x00_set_audio_divisor(struct ucb1x00 *ucb, unsigned int div)
+{
+	mcp_set_audio_divisor(ucb->mcp, div);
+}
+
+/**
+ *	ucb1x00_set_telecom_divisor -
+ *	@ucb: UCB1x00 structure describing chip
+ *	@div: SIB clock divisor
+ */
+static inline void ucb1x00_set_telecom_divisor(struct ucb1x00 *ucb, unsigned int div)
+{
+	mcp_set_telecom_divisor(ucb->mcp, div);
+}
+
+void ucb1x00_io_set_dir(struct ucb1x00 *ucb, unsigned int, unsigned int);
+void ucb1x00_io_write(struct ucb1x00 *ucb, unsigned int, unsigned int);
+unsigned int ucb1x00_io_read(struct ucb1x00 *ucb);
+
+#define UCB_NOSYNC	(0)
+#define UCB_SYNC	(1)
+
+unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync);
+void ucb1x00_adc_enable(struct ucb1x00 *ucb);
+void ucb1x00_adc_disable(struct ucb1x00 *ucb);
+
+#endif
diff --git a/include/linux/mfd/vt1603/core.h b/include/linux/mfd/vt1603/core.h
new file mode 100755
index 00000000..3dc639c2
--- /dev/null
+++ b/include/linux/mfd/vt1603/core.h
@@ -0,0 +1,44 @@
+/*++ 
+ * WonderMedia core driver for VT1603/VT1609
+ *
+ * Copyright c 2010  WonderMedia  Technologies, Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify 
+ * it under the terms of the GNU General Public License as published by 
+ * the Free Software Foundation, either version 2 of the License, or 
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, 
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+ * GNU General Public License for more details. 
+ *
+ * You should have received a copy of the GNU General Public License 
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * WonderMedia Technologies, Inc.
+ * 4F, 533, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C
+--*/
+
+#ifndef __MFD_VT1603_CORE_H__
+#define __MFD_VT1603_CORE_H__
+
+enum vt1603_type {
+	VT1603 = 0,
+	VT1609 = 1,
+};
+
+struct vt1603 {
+	int (*reg_read)(struct vt1603 *vt1603, u8 reg, u8 *val);
+	int (*reg_write)(struct vt1603 *vt1603, u8 reg, u8 val);
+	void *control_data;
+	int type;
+	struct device *dev;
+};
+
+/* Device I/O API */
+int vt1603_reg_write(struct vt1603 *vt1603, u8 reg, u8 val);
+int vt1603_reg_read(struct vt1603 *vt1603, u8 reg, u8 *val);
+void vt1603_regs_dump(struct vt1603 *vt1603);
+
+#endif
diff --git a/include/linux/mfd/wl1273-core.h b/include/linux/mfd/wl1273-core.h
new file mode 100644
index 00000000..db2f3f45
--- /dev/null
+++ b/include/linux/mfd/wl1273-core.h
@@ -0,0 +1,290 @@
+/*
+ * include/linux/mfd/wl1273-core.h
+ *
+ * Some definitions for the wl1273 radio receiver/transmitter chip.
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Author: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef WL1273_CORE_H
+#define WL1273_CORE_H
+
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+
+#define WL1273_FM_DRIVER_NAME	"wl1273-fm"
+#define RX71_FM_I2C_ADDR	0x22
+
+#define WL1273_STEREO_GET		0
+#define WL1273_RSSI_LVL_GET		1
+#define WL1273_IF_COUNT_GET		2
+#define WL1273_FLAG_GET			3
+#define WL1273_RDS_SYNC_GET		4
+#define WL1273_RDS_DATA_GET		5
+#define WL1273_FREQ_SET			10
+#define WL1273_AF_FREQ_SET		11
+#define WL1273_MOST_MODE_SET		12
+#define WL1273_MOST_BLEND_SET		13
+#define WL1273_DEMPH_MODE_SET		14
+#define WL1273_SEARCH_LVL_SET		15
+#define WL1273_BAND_SET			16
+#define WL1273_MUTE_STATUS_SET		17
+#define WL1273_RDS_PAUSE_LVL_SET	18
+#define WL1273_RDS_PAUSE_DUR_SET	19
+#define WL1273_RDS_MEM_SET		20
+#define WL1273_RDS_BLK_B_SET		21
+#define WL1273_RDS_MSK_B_SET		22
+#define WL1273_RDS_PI_MASK_SET		23
+#define WL1273_RDS_PI_SET		24
+#define WL1273_RDS_SYSTEM_SET		25
+#define WL1273_INT_MASK_SET		26
+#define WL1273_SEARCH_DIR_SET		27
+#define WL1273_VOLUME_SET		28
+#define WL1273_AUDIO_ENABLE		29
+#define WL1273_PCM_MODE_SET		30
+#define WL1273_I2S_MODE_CONFIG_SET	31
+#define WL1273_POWER_SET		32
+#define WL1273_INTX_CONFIG_SET		33
+#define WL1273_PULL_EN_SET		34
+#define WL1273_HILO_SET			35
+#define WL1273_SWITCH2FREF		36
+#define WL1273_FREQ_DRIFT_REPORT	37
+
+#define WL1273_PCE_GET			40
+#define WL1273_FIRM_VER_GET		41
+#define WL1273_ASIC_VER_GET		42
+#define WL1273_ASIC_ID_GET		43
+#define WL1273_MAN_ID_GET		44
+#define WL1273_TUNER_MODE_SET		45
+#define WL1273_STOP_SEARCH		46
+#define WL1273_RDS_CNTRL_SET		47
+
+#define WL1273_WRITE_HARDWARE_REG	100
+#define WL1273_CODE_DOWNLOAD		101
+#define WL1273_RESET			102
+
+#define WL1273_FM_POWER_MODE		254
+#define WL1273_FM_INTERRUPT		255
+
+/* Transmitter API */
+
+#define WL1273_CHANL_SET			55
+#define WL1273_SCAN_SPACING_SET			56
+#define WL1273_REF_SET				57
+#define WL1273_POWER_ENB_SET			90
+#define WL1273_POWER_ATT_SET			58
+#define WL1273_POWER_LEV_SET			59
+#define WL1273_AUDIO_DEV_SET			60
+#define WL1273_PILOT_DEV_SET			61
+#define WL1273_RDS_DEV_SET			62
+#define WL1273_PUPD_SET				91
+#define WL1273_AUDIO_IO_SET			63
+#define WL1273_PREMPH_SET			64
+#define WL1273_MONO_SET				66
+#define WL1273_MUTE				92
+#define WL1273_MPX_LMT_ENABLE			67
+#define WL1273_PI_SET				93
+#define WL1273_ECC_SET				69
+#define WL1273_PTY				70
+#define WL1273_AF				71
+#define WL1273_DISPLAY_MODE			74
+#define WL1273_RDS_REP_SET			77
+#define WL1273_RDS_CONFIG_DATA_SET		98
+#define WL1273_RDS_DATA_SET			99
+#define WL1273_RDS_DATA_ENB			94
+#define WL1273_TA_SET				78
+#define WL1273_TP_SET				79
+#define WL1273_DI_SET				80
+#define WL1273_MS_SET				81
+#define WL1273_PS_SCROLL_SPEED			82
+#define WL1273_TX_AUDIO_LEVEL_TEST		96
+#define WL1273_TX_AUDIO_LEVEL_TEST_THRESHOLD	73
+#define WL1273_TX_AUDIO_INPUT_LEVEL_RANGE_SET	54
+#define WL1273_RX_ANTENNA_SELECT		87
+#define WL1273_I2C_DEV_ADDR_SET			86
+#define WL1273_REF_ERR_CALIB_PARAM_SET		88
+#define WL1273_REF_ERR_CALIB_PERIODICITY_SET	89
+#define WL1273_SOC_INT_TRIGGER			52
+#define WL1273_SOC_AUDIO_PATH_SET		83
+#define WL1273_SOC_PCMI_OVERRIDE		84
+#define WL1273_SOC_I2S_OVERRIDE			85
+#define WL1273_RSSI_BLOCK_SCAN_FREQ_SET		95
+#define WL1273_RSSI_BLOCK_SCAN_START		97
+#define WL1273_RSSI_BLOCK_SCAN_DATA_GET		5
+#define WL1273_READ_FMANT_TUNE_VALUE		104
+
+#define WL1273_RDS_OFF		0
+#define WL1273_RDS_ON		1
+#define WL1273_RDS_RESET	2
+
+#define WL1273_AUDIO_DIGITAL	0
+#define WL1273_AUDIO_ANALOG	1
+
+#define WL1273_MODE_RX		BIT(0)
+#define WL1273_MODE_TX		BIT(1)
+#define WL1273_MODE_OFF		BIT(2)
+#define WL1273_MODE_SUSPENDED	BIT(3)
+
+#define WL1273_RADIO_CHILD	BIT(0)
+#define WL1273_CODEC_CHILD	BIT(1)
+
+#define WL1273_RX_MONO		1
+#define WL1273_RX_STEREO	0
+#define WL1273_TX_MONO		0
+#define WL1273_TX_STEREO	1
+
+#define WL1273_MAX_VOLUME	0xffff
+#define WL1273_DEFAULT_VOLUME	0x78b8
+
+/* I2S protocol, left channel first, data width 16 bits */
+#define WL1273_PCM_DEF_MODE		0x00
+
+/* Rx */
+#define WL1273_AUDIO_ENABLE_I2S		BIT(0)
+#define WL1273_AUDIO_ENABLE_ANALOG	BIT(1)
+
+/* Tx */
+#define WL1273_AUDIO_IO_SET_ANALOG	0
+#define WL1273_AUDIO_IO_SET_I2S		1
+
+#define WL1273_PUPD_SET_OFF		0x00
+#define WL1273_PUPD_SET_ON		0x01
+#define WL1273_PUPD_SET_RETENTION	0x10
+
+/* I2S mode */
+#define WL1273_IS2_WIDTH_32	0x0
+#define WL1273_IS2_WIDTH_40	0x1
+#define WL1273_IS2_WIDTH_22_23	0x2
+#define WL1273_IS2_WIDTH_23_22	0x3
+#define WL1273_IS2_WIDTH_48	0x4
+#define WL1273_IS2_WIDTH_50	0x5
+#define WL1273_IS2_WIDTH_60	0x6
+#define WL1273_IS2_WIDTH_64	0x7
+#define WL1273_IS2_WIDTH_80	0x8
+#define WL1273_IS2_WIDTH_96	0x9
+#define WL1273_IS2_WIDTH_128	0xa
+#define WL1273_IS2_WIDTH	0xf
+
+#define WL1273_IS2_FORMAT_STD	(0x0 << 4)
+#define WL1273_IS2_FORMAT_LEFT	(0x1 << 4)
+#define WL1273_IS2_FORMAT_RIGHT	(0x2 << 4)
+#define WL1273_IS2_FORMAT_USER	(0x3 << 4)
+
+#define WL1273_IS2_MASTER	(0x0 << 6)
+#define WL1273_IS2_SLAVEW	(0x1 << 6)
+
+#define WL1273_IS2_TRI_AFTER_SENDING	(0x0 << 7)
+#define WL1273_IS2_TRI_ALWAYS_ACTIVE	(0x1 << 7)
+
+#define WL1273_IS2_SDOWS_RR	(0x0 << 8)
+#define WL1273_IS2_SDOWS_RF	(0x1 << 8)
+#define WL1273_IS2_SDOWS_FR	(0x2 << 8)
+#define WL1273_IS2_SDOWS_FF	(0x3 << 8)
+
+#define WL1273_IS2_TRI_OPT	(0x0 << 10)
+#define WL1273_IS2_TRI_ALWAYS	(0x1 << 10)
+
+#define WL1273_IS2_RATE_48K	(0x0 << 12)
+#define WL1273_IS2_RATE_44_1K	(0x1 << 12)
+#define WL1273_IS2_RATE_32K	(0x2 << 12)
+#define WL1273_IS2_RATE_22_05K	(0x4 << 12)
+#define WL1273_IS2_RATE_16K	(0x5 << 12)
+#define WL1273_IS2_RATE_12K	(0x8 << 12)
+#define WL1273_IS2_RATE_11_025	(0x9 << 12)
+#define WL1273_IS2_RATE_8K	(0xa << 12)
+#define WL1273_IS2_RATE		(0xf << 12)
+
+#define WL1273_I2S_DEF_MODE	(WL1273_IS2_WIDTH_32 | \
+				 WL1273_IS2_FORMAT_STD | \
+				 WL1273_IS2_MASTER | \
+				 WL1273_IS2_TRI_AFTER_SENDING | \
+				 WL1273_IS2_SDOWS_RR | \
+				 WL1273_IS2_TRI_OPT | \
+				 WL1273_IS2_RATE_48K)
+
+#define SCHAR_MIN (-128)
+#define SCHAR_MAX 127
+
+#define WL1273_FR_EVENT			BIT(0)
+#define WL1273_BL_EVENT			BIT(1)
+#define WL1273_RDS_EVENT		BIT(2)
+#define WL1273_BBLK_EVENT		BIT(3)
+#define WL1273_LSYNC_EVENT		BIT(4)
+#define WL1273_LEV_EVENT		BIT(5)
+#define WL1273_IFFR_EVENT		BIT(6)
+#define WL1273_PI_EVENT			BIT(7)
+#define WL1273_PD_EVENT			BIT(8)
+#define WL1273_STIC_EVENT		BIT(9)
+#define WL1273_MAL_EVENT		BIT(10)
+#define WL1273_POW_ENB_EVENT		BIT(11)
+#define WL1273_SCAN_OVER_EVENT		BIT(12)
+#define WL1273_ERROR_EVENT		BIT(13)
+
+#define TUNER_MODE_STOP_SEARCH		0
+#define TUNER_MODE_PRESET		1
+#define TUNER_MODE_AUTO_SEEK		2
+#define TUNER_MODE_AF			3
+#define TUNER_MODE_AUTO_SEEK_PI		4
+#define TUNER_MODE_AUTO_SEEK_BULK	5
+
+#define RDS_BLOCK_SIZE	3
+
+struct wl1273_fm_platform_data {
+	int (*request_resources) (struct i2c_client *client);
+	void (*free_resources) (void);
+	void (*enable) (void);
+	void (*disable) (void);
+
+	u8 forbidden_modes;
+	unsigned int children;
+};
+
+#define WL1273_FM_CORE_CELLS	2
+
+#define WL1273_BAND_OTHER	0
+#define WL1273_BAND_JAPAN	1
+
+#define WL1273_BAND_JAPAN_LOW	76000
+#define WL1273_BAND_JAPAN_HIGH	90000
+#define WL1273_BAND_OTHER_LOW	87500
+#define WL1273_BAND_OTHER_HIGH	108000
+
+#define WL1273_BAND_TX_LOW	76000
+#define WL1273_BAND_TX_HIGH	108000
+
+struct wl1273_core {
+	struct mfd_cell cells[WL1273_FM_CORE_CELLS];
+	struct wl1273_fm_platform_data *pdata;
+
+	unsigned int mode;
+	unsigned int i2s_mode;
+	unsigned int volume;
+	unsigned int audio_mode;
+	unsigned int channel_number;
+	struct mutex lock; /* for serializing fm radio operations */
+
+	struct i2c_client *client;
+
+	int (*read)(struct wl1273_core *core, u8, u16 *);
+	int (*write)(struct wl1273_core *core, u8, u16);
+	int (*write_data)(struct wl1273_core *core, u8 *, u16);
+	int (*set_audio)(struct wl1273_core *core, unsigned int);
+	int (*set_volume)(struct wl1273_core *core, unsigned int);
+};
+
+#endif	/* ifndef WL1273_CORE_H */
diff --git a/include/linux/mfd/wm831x/auxadc.h b/include/linux/mfd/wm831x/auxadc.h
new file mode 100644
index 00000000..b132067e
--- /dev/null
+++ b/include/linux/mfd/wm831x/auxadc.h
@@ -0,0 +1,216 @@
+/*
+ * include/linux/mfd/wm831x/auxadc.h -- Auxiliary ADC interface for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_AUXADC_H__
+#define __MFD_WM831X_AUXADC_H__
+
+/*
+ * R16429 (0x402D) - AuxADC Data
+ */
+#define WM831X_AUX_DATA_SRC_MASK                0xF000  /* AUX_DATA_SRC - [15:12] */
+#define WM831X_AUX_DATA_SRC_SHIFT                   12  /* AUX_DATA_SRC - [15:12] */
+#define WM831X_AUX_DATA_SRC_WIDTH                    4  /* AUX_DATA_SRC - [15:12] */
+#define WM831X_AUX_DATA_MASK                    0x0FFF  /* AUX_DATA - [11:0] */
+#define WM831X_AUX_DATA_SHIFT                        0  /* AUX_DATA - [11:0] */
+#define WM831X_AUX_DATA_WIDTH                       12  /* AUX_DATA - [11:0] */
+
+/*
+ * R16430 (0x402E) - AuxADC Control
+ */
+#define WM831X_AUX_ENA                          0x8000  /* AUX_ENA */
+#define WM831X_AUX_ENA_MASK                     0x8000  /* AUX_ENA */
+#define WM831X_AUX_ENA_SHIFT                        15  /* AUX_ENA */
+#define WM831X_AUX_ENA_WIDTH                         1  /* AUX_ENA */
+#define WM831X_AUX_CVT_ENA                      0x4000  /* AUX_CVT_ENA */
+#define WM831X_AUX_CVT_ENA_MASK                 0x4000  /* AUX_CVT_ENA */
+#define WM831X_AUX_CVT_ENA_SHIFT                    14  /* AUX_CVT_ENA */
+#define WM831X_AUX_CVT_ENA_WIDTH                     1  /* AUX_CVT_ENA */
+#define WM831X_AUX_SLPENA                       0x1000  /* AUX_SLPENA */
+#define WM831X_AUX_SLPENA_MASK                  0x1000  /* AUX_SLPENA */
+#define WM831X_AUX_SLPENA_SHIFT                     12  /* AUX_SLPENA */
+#define WM831X_AUX_SLPENA_WIDTH                      1  /* AUX_SLPENA */
+#define WM831X_AUX_FRC_ENA                      0x0800  /* AUX_FRC_ENA */
+#define WM831X_AUX_FRC_ENA_MASK                 0x0800  /* AUX_FRC_ENA */
+#define WM831X_AUX_FRC_ENA_SHIFT                    11  /* AUX_FRC_ENA */
+#define WM831X_AUX_FRC_ENA_WIDTH                     1  /* AUX_FRC_ENA */
+#define WM831X_AUX_RATE_MASK                    0x003F  /* AUX_RATE - [5:0] */
+#define WM831X_AUX_RATE_SHIFT                        0  /* AUX_RATE - [5:0] */
+#define WM831X_AUX_RATE_WIDTH                        6  /* AUX_RATE - [5:0] */
+
+/*
+ * R16431 (0x402F) - AuxADC Source
+ */
+#define WM831X_AUX_CAL_SEL                      0x8000  /* AUX_CAL_SEL */
+#define WM831X_AUX_CAL_SEL_MASK                 0x8000  /* AUX_CAL_SEL */
+#define WM831X_AUX_CAL_SEL_SHIFT                    15  /* AUX_CAL_SEL */
+#define WM831X_AUX_CAL_SEL_WIDTH                     1  /* AUX_CAL_SEL */
+#define WM831X_AUX_BKUP_BATT_SEL                0x0400  /* AUX_BKUP_BATT_SEL */
+#define WM831X_AUX_BKUP_BATT_SEL_MASK           0x0400  /* AUX_BKUP_BATT_SEL */
+#define WM831X_AUX_BKUP_BATT_SEL_SHIFT              10  /* AUX_BKUP_BATT_SEL */
+#define WM831X_AUX_BKUP_BATT_SEL_WIDTH               1  /* AUX_BKUP_BATT_SEL */
+#define WM831X_AUX_WALL_SEL                     0x0200  /* AUX_WALL_SEL */
+#define WM831X_AUX_WALL_SEL_MASK                0x0200  /* AUX_WALL_SEL */
+#define WM831X_AUX_WALL_SEL_SHIFT                    9  /* AUX_WALL_SEL */
+#define WM831X_AUX_WALL_SEL_WIDTH                    1  /* AUX_WALL_SEL */
+#define WM831X_AUX_BATT_SEL                     0x0100  /* AUX_BATT_SEL */
+#define WM831X_AUX_BATT_SEL_MASK                0x0100  /* AUX_BATT_SEL */
+#define WM831X_AUX_BATT_SEL_SHIFT                    8  /* AUX_BATT_SEL */
+#define WM831X_AUX_BATT_SEL_WIDTH                    1  /* AUX_BATT_SEL */
+#define WM831X_AUX_USB_SEL                      0x0080  /* AUX_USB_SEL */
+#define WM831X_AUX_USB_SEL_MASK                 0x0080  /* AUX_USB_SEL */
+#define WM831X_AUX_USB_SEL_SHIFT                     7  /* AUX_USB_SEL */
+#define WM831X_AUX_USB_SEL_WIDTH                     1  /* AUX_USB_SEL */
+#define WM831X_AUX_SYSVDD_SEL                   0x0040  /* AUX_SYSVDD_SEL */
+#define WM831X_AUX_SYSVDD_SEL_MASK              0x0040  /* AUX_SYSVDD_SEL */
+#define WM831X_AUX_SYSVDD_SEL_SHIFT                  6  /* AUX_SYSVDD_SEL */
+#define WM831X_AUX_SYSVDD_SEL_WIDTH                  1  /* AUX_SYSVDD_SEL */
+#define WM831X_AUX_BATT_TEMP_SEL                0x0020  /* AUX_BATT_TEMP_SEL */
+#define WM831X_AUX_BATT_TEMP_SEL_MASK           0x0020  /* AUX_BATT_TEMP_SEL */
+#define WM831X_AUX_BATT_TEMP_SEL_SHIFT               5  /* AUX_BATT_TEMP_SEL */
+#define WM831X_AUX_BATT_TEMP_SEL_WIDTH               1  /* AUX_BATT_TEMP_SEL */
+#define WM831X_AUX_CHIP_TEMP_SEL                0x0010  /* AUX_CHIP_TEMP_SEL */
+#define WM831X_AUX_CHIP_TEMP_SEL_MASK           0x0010  /* AUX_CHIP_TEMP_SEL */
+#define WM831X_AUX_CHIP_TEMP_SEL_SHIFT               4  /* AUX_CHIP_TEMP_SEL */
+#define WM831X_AUX_CHIP_TEMP_SEL_WIDTH               1  /* AUX_CHIP_TEMP_SEL */
+#define WM831X_AUX_AUX4_SEL                     0x0008  /* AUX_AUX4_SEL */
+#define WM831X_AUX_AUX4_SEL_MASK                0x0008  /* AUX_AUX4_SEL */
+#define WM831X_AUX_AUX4_SEL_SHIFT                    3  /* AUX_AUX4_SEL */
+#define WM831X_AUX_AUX4_SEL_WIDTH                    1  /* AUX_AUX4_SEL */
+#define WM831X_AUX_AUX3_SEL                     0x0004  /* AUX_AUX3_SEL */
+#define WM831X_AUX_AUX3_SEL_MASK                0x0004  /* AUX_AUX3_SEL */
+#define WM831X_AUX_AUX3_SEL_SHIFT                    2  /* AUX_AUX3_SEL */
+#define WM831X_AUX_AUX3_SEL_WIDTH                    1  /* AUX_AUX3_SEL */
+#define WM831X_AUX_AUX2_SEL                     0x0002  /* AUX_AUX2_SEL */
+#define WM831X_AUX_AUX2_SEL_MASK                0x0002  /* AUX_AUX2_SEL */
+#define WM831X_AUX_AUX2_SEL_SHIFT                    1  /* AUX_AUX2_SEL */
+#define WM831X_AUX_AUX2_SEL_WIDTH                    1  /* AUX_AUX2_SEL */
+#define WM831X_AUX_AUX1_SEL                     0x0001  /* AUX_AUX1_SEL */
+#define WM831X_AUX_AUX1_SEL_MASK                0x0001  /* AUX_AUX1_SEL */
+#define WM831X_AUX_AUX1_SEL_SHIFT                    0  /* AUX_AUX1_SEL */
+#define WM831X_AUX_AUX1_SEL_WIDTH                    1  /* AUX_AUX1_SEL */
+
+/*
+ * R16432 (0x4030) - Comparator Control
+ */
+#define WM831X_DCOMP4_STS                       0x0800  /* DCOMP4_STS */
+#define WM831X_DCOMP4_STS_MASK                  0x0800  /* DCOMP4_STS */
+#define WM831X_DCOMP4_STS_SHIFT                     11  /* DCOMP4_STS */
+#define WM831X_DCOMP4_STS_WIDTH                      1  /* DCOMP4_STS */
+#define WM831X_DCOMP3_STS                       0x0400  /* DCOMP3_STS */
+#define WM831X_DCOMP3_STS_MASK                  0x0400  /* DCOMP3_STS */
+#define WM831X_DCOMP3_STS_SHIFT                     10  /* DCOMP3_STS */
+#define WM831X_DCOMP3_STS_WIDTH                      1  /* DCOMP3_STS */
+#define WM831X_DCOMP2_STS                       0x0200  /* DCOMP2_STS */
+#define WM831X_DCOMP2_STS_MASK                  0x0200  /* DCOMP2_STS */
+#define WM831X_DCOMP2_STS_SHIFT                      9  /* DCOMP2_STS */
+#define WM831X_DCOMP2_STS_WIDTH                      1  /* DCOMP2_STS */
+#define WM831X_DCOMP1_STS                       0x0100  /* DCOMP1_STS */
+#define WM831X_DCOMP1_STS_MASK                  0x0100  /* DCOMP1_STS */
+#define WM831X_DCOMP1_STS_SHIFT                      8  /* DCOMP1_STS */
+#define WM831X_DCOMP1_STS_WIDTH                      1  /* DCOMP1_STS */
+#define WM831X_DCMP4_ENA                        0x0008  /* DCMP4_ENA */
+#define WM831X_DCMP4_ENA_MASK                   0x0008  /* DCMP4_ENA */
+#define WM831X_DCMP4_ENA_SHIFT                       3  /* DCMP4_ENA */
+#define WM831X_DCMP4_ENA_WIDTH                       1  /* DCMP4_ENA */
+#define WM831X_DCMP3_ENA                        0x0004  /* DCMP3_ENA */
+#define WM831X_DCMP3_ENA_MASK                   0x0004  /* DCMP3_ENA */
+#define WM831X_DCMP3_ENA_SHIFT                       2  /* DCMP3_ENA */
+#define WM831X_DCMP3_ENA_WIDTH                       1  /* DCMP3_ENA */
+#define WM831X_DCMP2_ENA                        0x0002  /* DCMP2_ENA */
+#define WM831X_DCMP2_ENA_MASK                   0x0002  /* DCMP2_ENA */
+#define WM831X_DCMP2_ENA_SHIFT                       1  /* DCMP2_ENA */
+#define WM831X_DCMP2_ENA_WIDTH                       1  /* DCMP2_ENA */
+#define WM831X_DCMP1_ENA                        0x0001  /* DCMP1_ENA */
+#define WM831X_DCMP1_ENA_MASK                   0x0001  /* DCMP1_ENA */
+#define WM831X_DCMP1_ENA_SHIFT                       0  /* DCMP1_ENA */
+#define WM831X_DCMP1_ENA_WIDTH                       1  /* DCMP1_ENA */
+
+/*
+ * R16433 (0x4031) - Comparator 1
+ */
+#define WM831X_DCMP1_SRC_MASK                   0xE000  /* DCMP1_SRC - [15:13] */
+#define WM831X_DCMP1_SRC_SHIFT                      13  /* DCMP1_SRC - [15:13] */
+#define WM831X_DCMP1_SRC_WIDTH                       3  /* DCMP1_SRC - [15:13] */
+#define WM831X_DCMP1_GT                         0x1000  /* DCMP1_GT */
+#define WM831X_DCMP1_GT_MASK                    0x1000  /* DCMP1_GT */
+#define WM831X_DCMP1_GT_SHIFT                       12  /* DCMP1_GT */
+#define WM831X_DCMP1_GT_WIDTH                        1  /* DCMP1_GT */
+#define WM831X_DCMP1_THR_MASK                   0x0FFF  /* DCMP1_THR - [11:0] */
+#define WM831X_DCMP1_THR_SHIFT                       0  /* DCMP1_THR - [11:0] */
+#define WM831X_DCMP1_THR_WIDTH                      12  /* DCMP1_THR - [11:0] */
+
+/*
+ * R16434 (0x4032) - Comparator 2
+ */
+#define WM831X_DCMP2_SRC_MASK                   0xE000  /* DCMP2_SRC - [15:13] */
+#define WM831X_DCMP2_SRC_SHIFT                      13  /* DCMP2_SRC - [15:13] */
+#define WM831X_DCMP2_SRC_WIDTH                       3  /* DCMP2_SRC - [15:13] */
+#define WM831X_DCMP2_GT                         0x1000  /* DCMP2_GT */
+#define WM831X_DCMP2_GT_MASK                    0x1000  /* DCMP2_GT */
+#define WM831X_DCMP2_GT_SHIFT                       12  /* DCMP2_GT */
+#define WM831X_DCMP2_GT_WIDTH                        1  /* DCMP2_GT */
+#define WM831X_DCMP2_THR_MASK                   0x0FFF  /* DCMP2_THR - [11:0] */
+#define WM831X_DCMP2_THR_SHIFT                       0  /* DCMP2_THR - [11:0] */
+#define WM831X_DCMP2_THR_WIDTH                      12  /* DCMP2_THR - [11:0] */
+
+/*
+ * R16435 (0x4033) - Comparator 3
+ */
+#define WM831X_DCMP3_SRC_MASK                   0xE000  /* DCMP3_SRC - [15:13] */
+#define WM831X_DCMP3_SRC_SHIFT                      13  /* DCMP3_SRC - [15:13] */
+#define WM831X_DCMP3_SRC_WIDTH                       3  /* DCMP3_SRC - [15:13] */
+#define WM831X_DCMP3_GT                         0x1000  /* DCMP3_GT */
+#define WM831X_DCMP3_GT_MASK                    0x1000  /* DCMP3_GT */
+#define WM831X_DCMP3_GT_SHIFT                       12  /* DCMP3_GT */
+#define WM831X_DCMP3_GT_WIDTH                        1  /* DCMP3_GT */
+#define WM831X_DCMP3_THR_MASK                   0x0FFF  /* DCMP3_THR - [11:0] */
+#define WM831X_DCMP3_THR_SHIFT                       0  /* DCMP3_THR - [11:0] */
+#define WM831X_DCMP3_THR_WIDTH                      12  /* DCMP3_THR - [11:0] */
+
+/*
+ * R16436 (0x4034) - Comparator 4
+ */
+#define WM831X_DCMP4_SRC_MASK                   0xE000  /* DCMP4_SRC - [15:13] */
+#define WM831X_DCMP4_SRC_SHIFT                      13  /* DCMP4_SRC - [15:13] */
+#define WM831X_DCMP4_SRC_WIDTH                       3  /* DCMP4_SRC - [15:13] */
+#define WM831X_DCMP4_GT                         0x1000  /* DCMP4_GT */
+#define WM831X_DCMP4_GT_MASK                    0x1000  /* DCMP4_GT */
+#define WM831X_DCMP4_GT_SHIFT                       12  /* DCMP4_GT */
+#define WM831X_DCMP4_GT_WIDTH                        1  /* DCMP4_GT */
+#define WM831X_DCMP4_THR_MASK                   0x0FFF  /* DCMP4_THR - [11:0] */
+#define WM831X_DCMP4_THR_SHIFT                       0  /* DCMP4_THR - [11:0] */
+#define WM831X_DCMP4_THR_WIDTH                      12  /* DCMP4_THR - [11:0] */
+
+#define WM831X_AUX_CAL_FACTOR  0xfff
+#define WM831X_AUX_CAL_NOMINAL 0x222
+
+enum wm831x_auxadc {
+	WM831X_AUX_CAL = 15,
+	WM831X_AUX_BKUP_BATT = 10,
+	WM831X_AUX_WALL = 9,
+	WM831X_AUX_BATT = 8,
+	WM831X_AUX_USB = 7,
+	WM831X_AUX_SYSVDD = 6,
+	WM831X_AUX_BATT_TEMP = 5,
+	WM831X_AUX_CHIP_TEMP = 4,
+	WM831X_AUX_AUX4 = 3,
+	WM831X_AUX_AUX3 = 2,
+	WM831X_AUX_AUX2 = 1,
+	WM831X_AUX_AUX1 = 0,
+};
+
+int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input);
+int wm831x_auxadc_read_uv(struct wm831x *wm831x, enum wm831x_auxadc input);
+
+#endif
diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h
new file mode 100644
index 00000000..4b121185
--- /dev/null
+++ b/include/linux/mfd/wm831x/core.h
@@ -0,0 +1,422 @@
+/*
+ * include/linux/mfd/wm831x/core.h -- Core interface for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_CORE_H__
+#define __MFD_WM831X_CORE_H__
+
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/regmap.h>
+
+/*
+ * Register values.
+ */
+#define WM831X_RESET_ID                         0x00
+#define WM831X_REVISION                         0x01
+#define WM831X_PARENT_ID                        0x4000
+#define WM831X_SYSVDD_CONTROL                   0x4001
+#define WM831X_THERMAL_MONITORING               0x4002
+#define WM831X_POWER_STATE                      0x4003
+#define WM831X_WATCHDOG                         0x4004
+#define WM831X_ON_PIN_CONTROL                   0x4005
+#define WM831X_RESET_CONTROL                    0x4006
+#define WM831X_CONTROL_INTERFACE                0x4007
+#define WM831X_SECURITY_KEY                     0x4008
+#define WM831X_SOFTWARE_SCRATCH                 0x4009
+#define WM831X_OTP_CONTROL                      0x400A
+#define WM831X_GPIO_LEVEL                       0x400C
+#define WM831X_SYSTEM_STATUS                    0x400D
+#define WM831X_ON_SOURCE                        0x400E
+#define WM831X_OFF_SOURCE                       0x400F
+#define WM831X_SYSTEM_INTERRUPTS                0x4010
+#define WM831X_INTERRUPT_STATUS_1               0x4011
+#define WM831X_INTERRUPT_STATUS_2               0x4012
+#define WM831X_INTERRUPT_STATUS_3               0x4013
+#define WM831X_INTERRUPT_STATUS_4               0x4014
+#define WM831X_INTERRUPT_STATUS_5               0x4015
+#define WM831X_IRQ_CONFIG                       0x4017
+#define WM831X_SYSTEM_INTERRUPTS_MASK           0x4018
+#define WM831X_INTERRUPT_STATUS_1_MASK          0x4019
+#define WM831X_INTERRUPT_STATUS_2_MASK          0x401A
+#define WM831X_INTERRUPT_STATUS_3_MASK          0x401B
+#define WM831X_INTERRUPT_STATUS_4_MASK          0x401C
+#define WM831X_INTERRUPT_STATUS_5_MASK          0x401D
+#define WM831X_RTC_WRITE_COUNTER                0x4020
+#define WM831X_RTC_TIME_1                       0x4021
+#define WM831X_RTC_TIME_2                       0x4022
+#define WM831X_RTC_ALARM_1                      0x4023
+#define WM831X_RTC_ALARM_2                      0x4024
+#define WM831X_RTC_CONTROL                      0x4025
+#define WM831X_RTC_TRIM                         0x4026
+#define WM831X_TOUCH_CONTROL_1                  0x4028
+#define WM831X_TOUCH_CONTROL_2                  0x4029
+#define WM831X_TOUCH_DATA_X                     0x402A
+#define WM831X_TOUCH_DATA_Y                     0x402B
+#define WM831X_TOUCH_DATA_Z                     0x402C
+#define WM831X_AUXADC_DATA                      0x402D
+#define WM831X_AUXADC_CONTROL                   0x402E
+#define WM831X_AUXADC_SOURCE                    0x402F
+#define WM831X_COMPARATOR_CONTROL               0x4030
+#define WM831X_COMPARATOR_1                     0x4031
+#define WM831X_COMPARATOR_2                     0x4032
+#define WM831X_COMPARATOR_3                     0x4033
+#define WM831X_COMPARATOR_4                     0x4034
+#define WM831X_GPIO1_CONTROL                    0x4038
+#define WM831X_GPIO2_CONTROL                    0x4039
+#define WM831X_GPIO3_CONTROL                    0x403A
+#define WM831X_GPIO4_CONTROL                    0x403B
+#define WM831X_GPIO5_CONTROL                    0x403C
+#define WM831X_GPIO6_CONTROL                    0x403D
+#define WM831X_GPIO7_CONTROL                    0x403E
+#define WM831X_GPIO8_CONTROL                    0x403F
+#define WM831X_GPIO9_CONTROL                    0x4040
+#define WM831X_GPIO10_CONTROL                   0x4041
+#define WM831X_GPIO11_CONTROL                   0x4042
+#define WM831X_GPIO12_CONTROL                   0x4043
+#define WM831X_GPIO13_CONTROL                   0x4044
+#define WM831X_GPIO14_CONTROL                   0x4045
+#define WM831X_GPIO15_CONTROL                   0x4046
+#define WM831X_GPIO16_CONTROL                   0x4047
+#define WM831X_CHARGER_CONTROL_1                0x4048
+#define WM831X_CHARGER_CONTROL_2                0x4049
+#define WM831X_CHARGER_STATUS                   0x404A
+#define WM831X_BACKUP_CHARGER_CONTROL           0x404B
+#define WM831X_STATUS_LED_1                     0x404C
+#define WM831X_STATUS_LED_2                     0x404D
+#define WM831X_CURRENT_SINK_1                   0x404E
+#define WM831X_CURRENT_SINK_2                   0x404F
+#define WM831X_DCDC_ENABLE                      0x4050
+#define WM831X_LDO_ENABLE                       0x4051
+#define WM831X_DCDC_STATUS                      0x4052
+#define WM831X_LDO_STATUS                       0x4053
+#define WM831X_DCDC_UV_STATUS                   0x4054
+#define WM831X_LDO_UV_STATUS                    0x4055
+#define WM831X_DC1_CONTROL_1                    0x4056
+#define WM831X_DC1_CONTROL_2                    0x4057
+#define WM831X_DC1_ON_CONFIG                    0x4058
+#define WM831X_DC1_SLEEP_CONTROL                0x4059
+#define WM831X_DC1_DVS_CONTROL                  0x405A
+#define WM831X_DC2_CONTROL_1                    0x405B
+#define WM831X_DC2_CONTROL_2                    0x405C
+#define WM831X_DC2_ON_CONFIG                    0x405D
+#define WM831X_DC2_SLEEP_CONTROL                0x405E
+#define WM831X_DC2_DVS_CONTROL                  0x405F
+#define WM831X_DC3_CONTROL_1                    0x4060
+#define WM831X_DC3_CONTROL_2                    0x4061
+#define WM831X_DC3_ON_CONFIG                    0x4062
+#define WM831X_DC3_SLEEP_CONTROL                0x4063
+#define WM831X_DC4_CONTROL                      0x4064
+#define WM831X_DC4_SLEEP_CONTROL                0x4065
+#define WM832X_DC4_SLEEP_CONTROL                0x4067
+#define WM831X_EPE1_CONTROL                     0x4066
+#define WM831X_EPE2_CONTROL                     0x4067
+#define WM831X_LDO1_CONTROL                     0x4068
+#define WM831X_LDO1_ON_CONTROL                  0x4069
+#define WM831X_LDO1_SLEEP_CONTROL               0x406A
+#define WM831X_LDO2_CONTROL                     0x406B
+#define WM831X_LDO2_ON_CONTROL                  0x406C
+#define WM831X_LDO2_SLEEP_CONTROL               0x406D
+#define WM831X_LDO3_CONTROL                     0x406E
+#define WM831X_LDO3_ON_CONTROL                  0x406F
+#define WM831X_LDO3_SLEEP_CONTROL               0x4070
+#define WM831X_LDO4_CONTROL                     0x4071
+#define WM831X_LDO4_ON_CONTROL                  0x4072
+#define WM831X_LDO4_SLEEP_CONTROL               0x4073
+#define WM831X_LDO5_CONTROL                     0x4074
+#define WM831X_LDO5_ON_CONTROL                  0x4075
+#define WM831X_LDO5_SLEEP_CONTROL               0x4076
+#define WM831X_LDO6_CONTROL                     0x4077
+#define WM831X_LDO6_ON_CONTROL                  0x4078
+#define WM831X_LDO6_SLEEP_CONTROL               0x4079
+#define WM831X_LDO7_CONTROL                     0x407A
+#define WM831X_LDO7_ON_CONTROL                  0x407B
+#define WM831X_LDO7_SLEEP_CONTROL               0x407C
+#define WM831X_LDO8_CONTROL                     0x407D
+#define WM831X_LDO8_ON_CONTROL                  0x407E
+#define WM831X_LDO8_SLEEP_CONTROL               0x407F
+#define WM831X_LDO9_CONTROL                     0x4080
+#define WM831X_LDO9_ON_CONTROL                  0x4081
+#define WM831X_LDO9_SLEEP_CONTROL               0x4082
+#define WM831X_LDO10_CONTROL                    0x4083
+#define WM831X_LDO10_ON_CONTROL                 0x4084
+#define WM831X_LDO10_SLEEP_CONTROL              0x4085
+#define WM831X_LDO11_ON_CONTROL                 0x4087
+#define WM831X_LDO11_SLEEP_CONTROL              0x4088
+#define WM831X_POWER_GOOD_SOURCE_1              0x408E
+#define WM831X_POWER_GOOD_SOURCE_2              0x408F
+#define WM831X_CLOCK_CONTROL_1                  0x4090
+#define WM831X_CLOCK_CONTROL_2                  0x4091
+#define WM831X_FLL_CONTROL_1                    0x4092
+#define WM831X_FLL_CONTROL_2                    0x4093
+#define WM831X_FLL_CONTROL_3                    0x4094
+#define WM831X_FLL_CONTROL_4                    0x4095
+#define WM831X_FLL_CONTROL_5                    0x4096
+#define WM831X_UNIQUE_ID_1                      0x7800
+#define WM831X_UNIQUE_ID_2                      0x7801
+#define WM831X_UNIQUE_ID_3                      0x7802
+#define WM831X_UNIQUE_ID_4                      0x7803
+#define WM831X_UNIQUE_ID_5                      0x7804
+#define WM831X_UNIQUE_ID_6                      0x7805
+#define WM831X_UNIQUE_ID_7                      0x7806
+#define WM831X_UNIQUE_ID_8                      0x7807
+#define WM831X_FACTORY_OTP_ID                   0x7808
+#define WM831X_FACTORY_OTP_1                    0x7809
+#define WM831X_FACTORY_OTP_2                    0x780A
+#define WM831X_FACTORY_OTP_3                    0x780B
+#define WM831X_FACTORY_OTP_4                    0x780C
+#define WM831X_FACTORY_OTP_5                    0x780D
+#define WM831X_CUSTOMER_OTP_ID                  0x7810
+#define WM831X_DC1_OTP_CONTROL                  0x7811
+#define WM831X_DC2_OTP_CONTROL                  0x7812
+#define WM831X_DC3_OTP_CONTROL                  0x7813
+#define WM831X_LDO1_2_OTP_CONTROL               0x7814
+#define WM831X_LDO3_4_OTP_CONTROL               0x7815
+#define WM831X_LDO5_6_OTP_CONTROL               0x7816
+#define WM831X_LDO7_8_OTP_CONTROL               0x7817
+#define WM831X_LDO9_10_OTP_CONTROL              0x7818
+#define WM831X_LDO11_EPE_CONTROL                0x7819
+#define WM831X_GPIO1_OTP_CONTROL                0x781A
+#define WM831X_GPIO2_OTP_CONTROL                0x781B
+#define WM831X_GPIO3_OTP_CONTROL                0x781C
+#define WM831X_GPIO4_OTP_CONTROL                0x781D
+#define WM831X_GPIO5_OTP_CONTROL                0x781E
+#define WM831X_GPIO6_OTP_CONTROL                0x781F
+#define WM831X_DBE_CHECK_DATA                   0x7827
+
+/*
+ * R0 (0x00) - Reset ID
+ */
+#define WM831X_CHIP_ID_MASK                     0xFFFF  /* CHIP_ID - [15:0] */
+#define WM831X_CHIP_ID_SHIFT                         0  /* CHIP_ID - [15:0] */
+#define WM831X_CHIP_ID_WIDTH                        16  /* CHIP_ID - [15:0] */
+
+/*
+ * R1 (0x01) - Revision
+ */
+#define WM831X_PARENT_REV_MASK                  0xFF00  /* PARENT_REV - [15:8] */
+#define WM831X_PARENT_REV_SHIFT                      8  /* PARENT_REV - [15:8] */
+#define WM831X_PARENT_REV_WIDTH                      8  /* PARENT_REV - [15:8] */
+#define WM831X_CHILD_REV_MASK                   0x00FF  /* CHILD_REV - [7:0] */
+#define WM831X_CHILD_REV_SHIFT                       0  /* CHILD_REV - [7:0] */
+#define WM831X_CHILD_REV_WIDTH                       8  /* CHILD_REV - [7:0] */
+
+/*
+ * R16384 (0x4000) - Parent ID
+ */
+#define WM831X_PARENT_ID_MASK                   0xFFFF  /* PARENT_ID - [15:0] */
+#define WM831X_PARENT_ID_SHIFT                       0  /* PARENT_ID - [15:0] */
+#define WM831X_PARENT_ID_WIDTH                      16  /* PARENT_ID - [15:0] */
+
+/*
+ * R16389 (0x4005) - ON Pin Control
+ */
+#define WM831X_ON_PIN_SECACT_MASK               0x0300  /* ON_PIN_SECACT - [9:8] */
+#define WM831X_ON_PIN_SECACT_SHIFT                   8  /* ON_PIN_SECACT - [9:8] */
+#define WM831X_ON_PIN_SECACT_WIDTH                   2  /* ON_PIN_SECACT - [9:8] */
+#define WM831X_ON_PIN_PRIMACT_MASK              0x0030  /* ON_PIN_PRIMACT - [5:4] */
+#define WM831X_ON_PIN_PRIMACT_SHIFT                  4  /* ON_PIN_PRIMACT - [5:4] */
+#define WM831X_ON_PIN_PRIMACT_WIDTH                  2  /* ON_PIN_PRIMACT - [5:4] */
+#define WM831X_ON_PIN_STS                       0x0008  /* ON_PIN_STS */
+#define WM831X_ON_PIN_STS_MASK                  0x0008  /* ON_PIN_STS */
+#define WM831X_ON_PIN_STS_SHIFT                      3  /* ON_PIN_STS */
+#define WM831X_ON_PIN_STS_WIDTH                      1  /* ON_PIN_STS */
+#define WM831X_ON_PIN_TO_MASK                   0x0003  /* ON_PIN_TO - [1:0] */
+#define WM831X_ON_PIN_TO_SHIFT                       0  /* ON_PIN_TO - [1:0] */
+#define WM831X_ON_PIN_TO_WIDTH                       2  /* ON_PIN_TO - [1:0] */
+
+/*
+ * R16528 (0x4090) - Clock Control 1
+ */
+#define WM831X_CLKOUT_ENA                       0x8000  /* CLKOUT_ENA */
+#define WM831X_CLKOUT_ENA_MASK                  0x8000  /* CLKOUT_ENA */
+#define WM831X_CLKOUT_ENA_SHIFT                     15  /* CLKOUT_ENA */
+#define WM831X_CLKOUT_ENA_WIDTH                      1  /* CLKOUT_ENA */
+#define WM831X_CLKOUT_OD                        0x2000  /* CLKOUT_OD */
+#define WM831X_CLKOUT_OD_MASK                   0x2000  /* CLKOUT_OD */
+#define WM831X_CLKOUT_OD_SHIFT                      13  /* CLKOUT_OD */
+#define WM831X_CLKOUT_OD_WIDTH                       1  /* CLKOUT_OD */
+#define WM831X_CLKOUT_SLOT_MASK                 0x0700  /* CLKOUT_SLOT - [10:8] */
+#define WM831X_CLKOUT_SLOT_SHIFT                     8  /* CLKOUT_SLOT - [10:8] */
+#define WM831X_CLKOUT_SLOT_WIDTH                     3  /* CLKOUT_SLOT - [10:8] */
+#define WM831X_CLKOUT_SLPSLOT_MASK              0x0070  /* CLKOUT_SLPSLOT - [6:4] */
+#define WM831X_CLKOUT_SLPSLOT_SHIFT                  4  /* CLKOUT_SLPSLOT - [6:4] */
+#define WM831X_CLKOUT_SLPSLOT_WIDTH                  3  /* CLKOUT_SLPSLOT - [6:4] */
+#define WM831X_CLKOUT_SRC                       0x0001  /* CLKOUT_SRC */
+#define WM831X_CLKOUT_SRC_MASK                  0x0001  /* CLKOUT_SRC */
+#define WM831X_CLKOUT_SRC_SHIFT                      0  /* CLKOUT_SRC */
+#define WM831X_CLKOUT_SRC_WIDTH                      1  /* CLKOUT_SRC */
+
+/*
+ * R16529 (0x4091) - Clock Control 2
+ */
+#define WM831X_XTAL_INH                         0x8000  /* XTAL_INH */
+#define WM831X_XTAL_INH_MASK                    0x8000  /* XTAL_INH */
+#define WM831X_XTAL_INH_SHIFT                       15  /* XTAL_INH */
+#define WM831X_XTAL_INH_WIDTH                        1  /* XTAL_INH */
+#define WM831X_XTAL_ENA                         0x2000  /* XTAL_ENA */
+#define WM831X_XTAL_ENA_MASK                    0x2000  /* XTAL_ENA */
+#define WM831X_XTAL_ENA_SHIFT                       13  /* XTAL_ENA */
+#define WM831X_XTAL_ENA_WIDTH                        1  /* XTAL_ENA */
+#define WM831X_XTAL_BKUPENA                     0x1000  /* XTAL_BKUPENA */
+#define WM831X_XTAL_BKUPENA_MASK                0x1000  /* XTAL_BKUPENA */
+#define WM831X_XTAL_BKUPENA_SHIFT                   12  /* XTAL_BKUPENA */
+#define WM831X_XTAL_BKUPENA_WIDTH                    1  /* XTAL_BKUPENA */
+#define WM831X_FLL_AUTO                         0x0080  /* FLL_AUTO */
+#define WM831X_FLL_AUTO_MASK                    0x0080  /* FLL_AUTO */
+#define WM831X_FLL_AUTO_SHIFT                        7  /* FLL_AUTO */
+#define WM831X_FLL_AUTO_WIDTH                        1  /* FLL_AUTO */
+#define WM831X_FLL_AUTO_FREQ_MASK               0x0007  /* FLL_AUTO_FREQ - [2:0] */
+#define WM831X_FLL_AUTO_FREQ_SHIFT                   0  /* FLL_AUTO_FREQ - [2:0] */
+#define WM831X_FLL_AUTO_FREQ_WIDTH                   3  /* FLL_AUTO_FREQ - [2:0] */
+
+/*
+ * R16530 (0x4092) - FLL Control 1
+ */
+#define WM831X_FLL_FRAC                         0x0004  /* FLL_FRAC */
+#define WM831X_FLL_FRAC_MASK                    0x0004  /* FLL_FRAC */
+#define WM831X_FLL_FRAC_SHIFT                        2  /* FLL_FRAC */
+#define WM831X_FLL_FRAC_WIDTH                        1  /* FLL_FRAC */
+#define WM831X_FLL_OSC_ENA                      0x0002  /* FLL_OSC_ENA */
+#define WM831X_FLL_OSC_ENA_MASK                 0x0002  /* FLL_OSC_ENA */
+#define WM831X_FLL_OSC_ENA_SHIFT                     1  /* FLL_OSC_ENA */
+#define WM831X_FLL_OSC_ENA_WIDTH                     1  /* FLL_OSC_ENA */
+#define WM831X_FLL_ENA                          0x0001  /* FLL_ENA */
+#define WM831X_FLL_ENA_MASK                     0x0001  /* FLL_ENA */
+#define WM831X_FLL_ENA_SHIFT                         0  /* FLL_ENA */
+#define WM831X_FLL_ENA_WIDTH                         1  /* FLL_ENA */
+
+/*
+ * R16531 (0x4093) - FLL Control 2
+ */
+#define WM831X_FLL_OUTDIV_MASK                  0x3F00  /* FLL_OUTDIV - [13:8] */
+#define WM831X_FLL_OUTDIV_SHIFT                      8  /* FLL_OUTDIV - [13:8] */
+#define WM831X_FLL_OUTDIV_WIDTH                      6  /* FLL_OUTDIV - [13:8] */
+#define WM831X_FLL_CTRL_RATE_MASK               0x0070  /* FLL_CTRL_RATE - [6:4] */
+#define WM831X_FLL_CTRL_RATE_SHIFT                   4  /* FLL_CTRL_RATE - [6:4] */
+#define WM831X_FLL_CTRL_RATE_WIDTH                   3  /* FLL_CTRL_RATE - [6:4] */
+#define WM831X_FLL_FRATIO_MASK                  0x0007  /* FLL_FRATIO - [2:0] */
+#define WM831X_FLL_FRATIO_SHIFT                      0  /* FLL_FRATIO - [2:0] */
+#define WM831X_FLL_FRATIO_WIDTH                      3  /* FLL_FRATIO - [2:0] */
+
+/*
+ * R16532 (0x4094) - FLL Control 3
+ */
+#define WM831X_FLL_K_MASK                       0xFFFF  /* FLL_K - [15:0] */
+#define WM831X_FLL_K_SHIFT                           0  /* FLL_K - [15:0] */
+#define WM831X_FLL_K_WIDTH                          16  /* FLL_K - [15:0] */
+
+/*
+ * R16533 (0x4095) - FLL Control 4
+ */
+#define WM831X_FLL_N_MASK                       0x7FE0  /* FLL_N - [14:5] */
+#define WM831X_FLL_N_SHIFT                           5  /* FLL_N - [14:5] */
+#define WM831X_FLL_N_WIDTH                          10  /* FLL_N - [14:5] */
+#define WM831X_FLL_GAIN_MASK                    0x000F  /* FLL_GAIN - [3:0] */
+#define WM831X_FLL_GAIN_SHIFT                        0  /* FLL_GAIN - [3:0] */
+#define WM831X_FLL_GAIN_WIDTH                        4  /* FLL_GAIN - [3:0] */
+
+/*
+ * R16534 (0x4096) - FLL Control 5
+ */
+#define WM831X_FLL_CLK_REF_DIV_MASK             0x0018  /* FLL_CLK_REF_DIV - [4:3] */
+#define WM831X_FLL_CLK_REF_DIV_SHIFT                 3  /* FLL_CLK_REF_DIV - [4:3] */
+#define WM831X_FLL_CLK_REF_DIV_WIDTH                 2  /* FLL_CLK_REF_DIV - [4:3] */
+#define WM831X_FLL_CLK_SRC_MASK                 0x0003  /* FLL_CLK_SRC - [1:0] */
+#define WM831X_FLL_CLK_SRC_SHIFT                     0  /* FLL_CLK_SRC - [1:0] */
+#define WM831X_FLL_CLK_SRC_WIDTH                     2  /* FLL_CLK_SRC - [1:0] */
+
+struct regulator_dev;
+
+#define WM831X_NUM_IRQ_REGS 5
+#define WM831X_NUM_GPIO_REGS 16
+
+enum wm831x_parent {
+	WM8310 = 0x8310,
+	WM8311 = 0x8311,
+	WM8312 = 0x8312,
+	WM8320 = 0x8320,
+	WM8321 = 0x8321,
+	WM8325 = 0x8325,
+	WM8326 = 0x8326,
+};
+
+struct wm831x;
+enum wm831x_auxadc;
+
+typedef int (*wm831x_auxadc_read_fn)(struct wm831x *wm831x,
+				     enum wm831x_auxadc input);
+
+struct wm831x {
+	struct mutex io_lock;
+
+	struct device *dev;
+
+	struct regmap *regmap;
+
+	int irq;  /* Our chip IRQ */
+	struct mutex irq_lock;
+	int irq_base;
+	int irq_masks_cur[WM831X_NUM_IRQ_REGS];   /* Currently active value */
+	int irq_masks_cache[WM831X_NUM_IRQ_REGS]; /* Cached hardware value */
+
+	bool soft_shutdown;
+
+	/* Chip revision based flags */
+	unsigned has_gpio_ena:1;         /* Has GPIO enable bit */
+	unsigned has_cs_sts:1;           /* Has current sink status bit */
+	unsigned charger_irq_wake:1;     /* Are charger IRQs a wake source? */
+
+	int num_gpio;
+
+	/* Used by the interrupt controller code to post writes */
+	int gpio_update[WM831X_NUM_GPIO_REGS];
+	bool gpio_level[WM831X_NUM_GPIO_REGS];
+
+	struct mutex auxadc_lock;
+	struct list_head auxadc_pending;
+	u16 auxadc_active;
+	wm831x_auxadc_read_fn auxadc_read;
+
+	/* The WM831x has a security key blocking access to certain
+	 * registers.  The mutex is taken by the accessors for locking
+	 * and unlocking the security key, locked is used to fail
+	 * writes if the lock is held.
+	 */
+	struct mutex key_lock;
+	unsigned int locked:1;
+};
+
+/* Device I/O API */
+int wm831x_reg_read(struct wm831x *wm831x, unsigned short reg);
+int wm831x_reg_write(struct wm831x *wm831x, unsigned short reg,
+		 unsigned short val);
+void wm831x_reg_lock(struct wm831x *wm831x);
+int wm831x_reg_unlock(struct wm831x *wm831x);
+int wm831x_set_bits(struct wm831x *wm831x, unsigned short reg,
+		    unsigned short mask, unsigned short val);
+int wm831x_bulk_read(struct wm831x *wm831x, unsigned short reg,
+		     int count, u16 *buf);
+
+int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq);
+void wm831x_device_exit(struct wm831x *wm831x);
+int wm831x_device_suspend(struct wm831x *wm831x);
+void wm831x_device_shutdown(struct wm831x *wm831x);
+int wm831x_irq_init(struct wm831x *wm831x, int irq);
+void wm831x_irq_exit(struct wm831x *wm831x);
+void wm831x_auxadc_init(struct wm831x *wm831x);
+
+extern struct regmap_config wm831x_regmap_config;
+
+#endif
diff --git a/include/linux/mfd/wm831x/gpio.h b/include/linux/mfd/wm831x/gpio.h
new file mode 100644
index 00000000..9b163c58
--- /dev/null
+++ b/include/linux/mfd/wm831x/gpio.h
@@ -0,0 +1,59 @@
+/*
+ * include/linux/mfd/wm831x/gpio.h -- GPIO for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_GPIO_H__
+#define __MFD_WM831X_GPIO_H__
+
+/*
+ * R16440-16455 (0x4038-0x4047) - GPIOx Control
+ */
+#define WM831X_GPN_DIR                          0x8000  /* GPN_DIR */
+#define WM831X_GPN_DIR_MASK                     0x8000  /* GPN_DIR */
+#define WM831X_GPN_DIR_SHIFT                        15  /* GPN_DIR */
+#define WM831X_GPN_DIR_WIDTH                         1  /* GPN_DIR */
+#define WM831X_GPN_PULL_MASK                    0x6000  /* GPN_PULL - [14:13] */
+#define WM831X_GPN_PULL_SHIFT                       13  /* GPN_PULL - [14:13] */
+#define WM831X_GPN_PULL_WIDTH                        2  /* GPN_PULL - [14:13] */
+#define WM831X_GPN_INT_MODE                     0x1000  /* GPN_INT_MODE */
+#define WM831X_GPN_INT_MODE_MASK                0x1000  /* GPN_INT_MODE */
+#define WM831X_GPN_INT_MODE_SHIFT                   12  /* GPN_INT_MODE */
+#define WM831X_GPN_INT_MODE_WIDTH                    1  /* GPN_INT_MODE */
+#define WM831X_GPN_PWR_DOM                      0x0800  /* GPN_PWR_DOM */
+#define WM831X_GPN_PWR_DOM_MASK                 0x0800  /* GPN_PWR_DOM */
+#define WM831X_GPN_PWR_DOM_SHIFT                    11  /* GPN_PWR_DOM */
+#define WM831X_GPN_PWR_DOM_WIDTH                     1  /* GPN_PWR_DOM */
+#define WM831X_GPN_POL                          0x0400  /* GPN_POL */
+#define WM831X_GPN_POL_MASK                     0x0400  /* GPN_POL */
+#define WM831X_GPN_POL_SHIFT                        10  /* GPN_POL */
+#define WM831X_GPN_POL_WIDTH                         1  /* GPN_POL */
+#define WM831X_GPN_OD                           0x0200  /* GPN_OD */
+#define WM831X_GPN_OD_MASK                      0x0200  /* GPN_OD */
+#define WM831X_GPN_OD_SHIFT                          9  /* GPN_OD */
+#define WM831X_GPN_OD_WIDTH                          1  /* GPN_OD */
+#define WM831X_GPN_ENA                          0x0080  /* GPN_ENA */
+#define WM831X_GPN_ENA_MASK                     0x0080  /* GPN_ENA */
+#define WM831X_GPN_ENA_SHIFT                         7  /* GPN_ENA */
+#define WM831X_GPN_ENA_WIDTH                         1  /* GPN_ENA */
+#define WM831X_GPN_TRI                          0x0080  /* GPN_TRI */
+#define WM831X_GPN_TRI_MASK                     0x0080  /* GPN_TRI */
+#define WM831X_GPN_TRI_SHIFT                         7  /* GPN_TRI */
+#define WM831X_GPN_TRI_WIDTH                         1  /* GPN_TRI */
+#define WM831X_GPN_FN_MASK                      0x000F  /* GPN_FN - [3:0] */
+#define WM831X_GPN_FN_SHIFT                          0  /* GPN_FN - [3:0] */
+#define WM831X_GPN_FN_WIDTH                          4  /* GPN_FN - [3:0] */
+
+#define WM831X_GPIO_PULL_NONE (0 << WM831X_GPN_PULL_SHIFT)
+#define WM831X_GPIO_PULL_DOWN (1 << WM831X_GPN_PULL_SHIFT)
+#define WM831X_GPIO_PULL_UP   (2 << WM831X_GPN_PULL_SHIFT)
+#endif
diff --git a/include/linux/mfd/wm831x/irq.h b/include/linux/mfd/wm831x/irq.h
new file mode 100644
index 00000000..3a8c9765
--- /dev/null
+++ b/include/linux/mfd/wm831x/irq.h
@@ -0,0 +1,764 @@
+/*
+ * include/linux/mfd/wm831x/irq.h -- Interrupt controller for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_IRQ_H__
+#define __MFD_WM831X_IRQ_H__
+
+/* Interrupt number assignments within Linux */
+#define WM831X_IRQ_TEMP_THW 0
+#define WM831X_IRQ_GPIO_1   1
+#define WM831X_IRQ_GPIO_2   2
+#define WM831X_IRQ_GPIO_3   3
+#define WM831X_IRQ_GPIO_4   4
+#define WM831X_IRQ_GPIO_5   5
+#define WM831X_IRQ_GPIO_6   6
+#define WM831X_IRQ_GPIO_7   7
+#define WM831X_IRQ_GPIO_8   8
+#define WM831X_IRQ_GPIO_9   9
+#define WM831X_IRQ_GPIO_10  10
+#define WM831X_IRQ_GPIO_11  11
+#define WM831X_IRQ_GPIO_12  12
+#define WM831X_IRQ_GPIO_13  13
+#define WM831X_IRQ_GPIO_14  14
+#define WM831X_IRQ_GPIO_15  15
+#define WM831X_IRQ_GPIO_16  16
+#define WM831X_IRQ_ON           17
+#define WM831X_IRQ_PPM_SYSLO    18
+#define WM831X_IRQ_PPM_PWR_SRC  19
+#define WM831X_IRQ_PPM_USB_CURR 20
+#define WM831X_IRQ_WDOG_TO      21
+#define WM831X_IRQ_RTC_PER      22
+#define WM831X_IRQ_RTC_ALM      23
+#define WM831X_IRQ_CHG_BATT_HOT  24
+#define WM831X_IRQ_CHG_BATT_COLD 25
+#define WM831X_IRQ_CHG_BATT_FAIL 26
+#define WM831X_IRQ_CHG_OV        27
+#define WM831X_IRQ_CHG_END       29
+#define WM831X_IRQ_CHG_TO        30
+#define WM831X_IRQ_CHG_MODE      31
+#define WM831X_IRQ_CHG_START     32
+#define WM831X_IRQ_TCHDATA       33
+#define WM831X_IRQ_TCHPD         34
+#define WM831X_IRQ_AUXADC_DATA   35
+#define WM831X_IRQ_AUXADC_DCOMP1 36
+#define WM831X_IRQ_AUXADC_DCOMP2 37
+#define WM831X_IRQ_AUXADC_DCOMP3 38
+#define WM831X_IRQ_AUXADC_DCOMP4 39
+#define WM831X_IRQ_CS1           40
+#define WM831X_IRQ_CS2           41
+#define WM831X_IRQ_HC_DC1        42
+#define WM831X_IRQ_HC_DC2        43
+#define WM831X_IRQ_UV_LDO1       44
+#define WM831X_IRQ_UV_LDO2       45
+#define WM831X_IRQ_UV_LDO3       46
+#define WM831X_IRQ_UV_LDO4       47
+#define WM831X_IRQ_UV_LDO5       48
+#define WM831X_IRQ_UV_LDO6       49
+#define WM831X_IRQ_UV_LDO7       50
+#define WM831X_IRQ_UV_LDO8       51
+#define WM831X_IRQ_UV_LDO9       52
+#define WM831X_IRQ_UV_LDO10      53
+#define WM831X_IRQ_UV_DC1        54
+#define WM831X_IRQ_UV_DC2        55
+#define WM831X_IRQ_UV_DC3        56
+#define WM831X_IRQ_UV_DC4        57
+
+#define WM831X_NUM_IRQS     58
+
+/*
+ * R16400 (0x4010) - System Interrupts
+ */
+#define WM831X_PS_INT                           0x8000  /* PS_INT */
+#define WM831X_PS_INT_MASK                      0x8000  /* PS_INT */
+#define WM831X_PS_INT_SHIFT                         15  /* PS_INT */
+#define WM831X_PS_INT_WIDTH                          1  /* PS_INT */
+#define WM831X_TEMP_INT                         0x4000  /* TEMP_INT */
+#define WM831X_TEMP_INT_MASK                    0x4000  /* TEMP_INT */
+#define WM831X_TEMP_INT_SHIFT                       14  /* TEMP_INT */
+#define WM831X_TEMP_INT_WIDTH                        1  /* TEMP_INT */
+#define WM831X_GP_INT                           0x2000  /* GP_INT */
+#define WM831X_GP_INT_MASK                      0x2000  /* GP_INT */
+#define WM831X_GP_INT_SHIFT                         13  /* GP_INT */
+#define WM831X_GP_INT_WIDTH                          1  /* GP_INT */
+#define WM831X_ON_PIN_INT                       0x1000  /* ON_PIN_INT */
+#define WM831X_ON_PIN_INT_MASK                  0x1000  /* ON_PIN_INT */
+#define WM831X_ON_PIN_INT_SHIFT                     12  /* ON_PIN_INT */
+#define WM831X_ON_PIN_INT_WIDTH                      1  /* ON_PIN_INT */
+#define WM831X_WDOG_INT                         0x0800  /* WDOG_INT */
+#define WM831X_WDOG_INT_MASK                    0x0800  /* WDOG_INT */
+#define WM831X_WDOG_INT_SHIFT                       11  /* WDOG_INT */
+#define WM831X_WDOG_INT_WIDTH                        1  /* WDOG_INT */
+#define WM831X_TCHDATA_INT                      0x0400  /* TCHDATA_INT */
+#define WM831X_TCHDATA_INT_MASK                 0x0400  /* TCHDATA_INT */
+#define WM831X_TCHDATA_INT_SHIFT                    10  /* TCHDATA_INT */
+#define WM831X_TCHDATA_INT_WIDTH                     1  /* TCHDATA_INT */
+#define WM831X_TCHPD_INT                        0x0200  /* TCHPD_INT */
+#define WM831X_TCHPD_INT_MASK                   0x0200  /* TCHPD_INT */
+#define WM831X_TCHPD_INT_SHIFT                       9  /* TCHPD_INT */
+#define WM831X_TCHPD_INT_WIDTH                       1  /* TCHPD_INT */
+#define WM831X_AUXADC_INT                       0x0100  /* AUXADC_INT */
+#define WM831X_AUXADC_INT_MASK                  0x0100  /* AUXADC_INT */
+#define WM831X_AUXADC_INT_SHIFT                      8  /* AUXADC_INT */
+#define WM831X_AUXADC_INT_WIDTH                      1  /* AUXADC_INT */
+#define WM831X_PPM_INT                          0x0080  /* PPM_INT */
+#define WM831X_PPM_INT_MASK                     0x0080  /* PPM_INT */
+#define WM831X_PPM_INT_SHIFT                         7  /* PPM_INT */
+#define WM831X_PPM_INT_WIDTH                         1  /* PPM_INT */
+#define WM831X_CS_INT                           0x0040  /* CS_INT */
+#define WM831X_CS_INT_MASK                      0x0040  /* CS_INT */
+#define WM831X_CS_INT_SHIFT                          6  /* CS_INT */
+#define WM831X_CS_INT_WIDTH                          1  /* CS_INT */
+#define WM831X_RTC_INT                          0x0020  /* RTC_INT */
+#define WM831X_RTC_INT_MASK                     0x0020  /* RTC_INT */
+#define WM831X_RTC_INT_SHIFT                         5  /* RTC_INT */
+#define WM831X_RTC_INT_WIDTH                         1  /* RTC_INT */
+#define WM831X_OTP_INT                          0x0010  /* OTP_INT */
+#define WM831X_OTP_INT_MASK                     0x0010  /* OTP_INT */
+#define WM831X_OTP_INT_SHIFT                         4  /* OTP_INT */
+#define WM831X_OTP_INT_WIDTH                         1  /* OTP_INT */
+#define WM831X_CHILD_INT                        0x0008  /* CHILD_INT */
+#define WM831X_CHILD_INT_MASK                   0x0008  /* CHILD_INT */
+#define WM831X_CHILD_INT_SHIFT                       3  /* CHILD_INT */
+#define WM831X_CHILD_INT_WIDTH                       1  /* CHILD_INT */
+#define WM831X_CHG_INT                          0x0004  /* CHG_INT */
+#define WM831X_CHG_INT_MASK                     0x0004  /* CHG_INT */
+#define WM831X_CHG_INT_SHIFT                         2  /* CHG_INT */
+#define WM831X_CHG_INT_WIDTH                         1  /* CHG_INT */
+#define WM831X_HC_INT                           0x0002  /* HC_INT */
+#define WM831X_HC_INT_MASK                      0x0002  /* HC_INT */
+#define WM831X_HC_INT_SHIFT                          1  /* HC_INT */
+#define WM831X_HC_INT_WIDTH                          1  /* HC_INT */
+#define WM831X_UV_INT                           0x0001  /* UV_INT */
+#define WM831X_UV_INT_MASK                      0x0001  /* UV_INT */
+#define WM831X_UV_INT_SHIFT                          0  /* UV_INT */
+#define WM831X_UV_INT_WIDTH                          1  /* UV_INT */
+
+/*
+ * R16401 (0x4011) - Interrupt Status 1
+ */
+#define WM831X_PPM_SYSLO_EINT                   0x8000  /* PPM_SYSLO_EINT */
+#define WM831X_PPM_SYSLO_EINT_MASK              0x8000  /* PPM_SYSLO_EINT */
+#define WM831X_PPM_SYSLO_EINT_SHIFT                 15  /* PPM_SYSLO_EINT */
+#define WM831X_PPM_SYSLO_EINT_WIDTH                  1  /* PPM_SYSLO_EINT */
+#define WM831X_PPM_PWR_SRC_EINT                 0x4000  /* PPM_PWR_SRC_EINT */
+#define WM831X_PPM_PWR_SRC_EINT_MASK            0x4000  /* PPM_PWR_SRC_EINT */
+#define WM831X_PPM_PWR_SRC_EINT_SHIFT               14  /* PPM_PWR_SRC_EINT */
+#define WM831X_PPM_PWR_SRC_EINT_WIDTH                1  /* PPM_PWR_SRC_EINT */
+#define WM831X_PPM_USB_CURR_EINT                0x2000  /* PPM_USB_CURR_EINT */
+#define WM831X_PPM_USB_CURR_EINT_MASK           0x2000  /* PPM_USB_CURR_EINT */
+#define WM831X_PPM_USB_CURR_EINT_SHIFT              13  /* PPM_USB_CURR_EINT */
+#define WM831X_PPM_USB_CURR_EINT_WIDTH               1  /* PPM_USB_CURR_EINT */
+#define WM831X_ON_PIN_EINT                      0x1000  /* ON_PIN_EINT */
+#define WM831X_ON_PIN_EINT_MASK                 0x1000  /* ON_PIN_EINT */
+#define WM831X_ON_PIN_EINT_SHIFT                    12  /* ON_PIN_EINT */
+#define WM831X_ON_PIN_EINT_WIDTH                     1  /* ON_PIN_EINT */
+#define WM831X_WDOG_TO_EINT                     0x0800  /* WDOG_TO_EINT */
+#define WM831X_WDOG_TO_EINT_MASK                0x0800  /* WDOG_TO_EINT */
+#define WM831X_WDOG_TO_EINT_SHIFT                   11  /* WDOG_TO_EINT */
+#define WM831X_WDOG_TO_EINT_WIDTH                    1  /* WDOG_TO_EINT */
+#define WM831X_TCHDATA_EINT                     0x0400  /* TCHDATA_EINT */
+#define WM831X_TCHDATA_EINT_MASK                0x0400  /* TCHDATA_EINT */
+#define WM831X_TCHDATA_EINT_SHIFT                   10  /* TCHDATA_EINT */
+#define WM831X_TCHDATA_EINT_WIDTH                    1  /* TCHDATA_EINT */
+#define WM831X_TCHPD_EINT                       0x0200  /* TCHPD_EINT */
+#define WM831X_TCHPD_EINT_MASK                  0x0200  /* TCHPD_EINT */
+#define WM831X_TCHPD_EINT_SHIFT                      9  /* TCHPD_EINT */
+#define WM831X_TCHPD_EINT_WIDTH                      1  /* TCHPD_EINT */
+#define WM831X_AUXADC_DATA_EINT                 0x0100  /* AUXADC_DATA_EINT */
+#define WM831X_AUXADC_DATA_EINT_MASK            0x0100  /* AUXADC_DATA_EINT */
+#define WM831X_AUXADC_DATA_EINT_SHIFT                8  /* AUXADC_DATA_EINT */
+#define WM831X_AUXADC_DATA_EINT_WIDTH                1  /* AUXADC_DATA_EINT */
+#define WM831X_AUXADC_DCOMP4_EINT               0x0080  /* AUXADC_DCOMP4_EINT */
+#define WM831X_AUXADC_DCOMP4_EINT_MASK          0x0080  /* AUXADC_DCOMP4_EINT */
+#define WM831X_AUXADC_DCOMP4_EINT_SHIFT              7  /* AUXADC_DCOMP4_EINT */
+#define WM831X_AUXADC_DCOMP4_EINT_WIDTH              1  /* AUXADC_DCOMP4_EINT */
+#define WM831X_AUXADC_DCOMP3_EINT               0x0040  /* AUXADC_DCOMP3_EINT */
+#define WM831X_AUXADC_DCOMP3_EINT_MASK          0x0040  /* AUXADC_DCOMP3_EINT */
+#define WM831X_AUXADC_DCOMP3_EINT_SHIFT              6  /* AUXADC_DCOMP3_EINT */
+#define WM831X_AUXADC_DCOMP3_EINT_WIDTH              1  /* AUXADC_DCOMP3_EINT */
+#define WM831X_AUXADC_DCOMP2_EINT               0x0020  /* AUXADC_DCOMP2_EINT */
+#define WM831X_AUXADC_DCOMP2_EINT_MASK          0x0020  /* AUXADC_DCOMP2_EINT */
+#define WM831X_AUXADC_DCOMP2_EINT_SHIFT              5  /* AUXADC_DCOMP2_EINT */
+#define WM831X_AUXADC_DCOMP2_EINT_WIDTH              1  /* AUXADC_DCOMP2_EINT */
+#define WM831X_AUXADC_DCOMP1_EINT               0x0010  /* AUXADC_DCOMP1_EINT */
+#define WM831X_AUXADC_DCOMP1_EINT_MASK          0x0010  /* AUXADC_DCOMP1_EINT */
+#define WM831X_AUXADC_DCOMP1_EINT_SHIFT              4  /* AUXADC_DCOMP1_EINT */
+#define WM831X_AUXADC_DCOMP1_EINT_WIDTH              1  /* AUXADC_DCOMP1_EINT */
+#define WM831X_RTC_PER_EINT                     0x0008  /* RTC_PER_EINT */
+#define WM831X_RTC_PER_EINT_MASK                0x0008  /* RTC_PER_EINT */
+#define WM831X_RTC_PER_EINT_SHIFT                    3  /* RTC_PER_EINT */
+#define WM831X_RTC_PER_EINT_WIDTH                    1  /* RTC_PER_EINT */
+#define WM831X_RTC_ALM_EINT                     0x0004  /* RTC_ALM_EINT */
+#define WM831X_RTC_ALM_EINT_MASK                0x0004  /* RTC_ALM_EINT */
+#define WM831X_RTC_ALM_EINT_SHIFT                    2  /* RTC_ALM_EINT */
+#define WM831X_RTC_ALM_EINT_WIDTH                    1  /* RTC_ALM_EINT */
+#define WM831X_TEMP_THW_EINT                    0x0002  /* TEMP_THW_EINT */
+#define WM831X_TEMP_THW_EINT_MASK               0x0002  /* TEMP_THW_EINT */
+#define WM831X_TEMP_THW_EINT_SHIFT                   1  /* TEMP_THW_EINT */
+#define WM831X_TEMP_THW_EINT_WIDTH                   1  /* TEMP_THW_EINT */
+
+/*
+ * R16402 (0x4012) - Interrupt Status 2
+ */
+#define WM831X_CHG_BATT_HOT_EINT                0x8000  /* CHG_BATT_HOT_EINT */
+#define WM831X_CHG_BATT_HOT_EINT_MASK           0x8000  /* CHG_BATT_HOT_EINT */
+#define WM831X_CHG_BATT_HOT_EINT_SHIFT              15  /* CHG_BATT_HOT_EINT */
+#define WM831X_CHG_BATT_HOT_EINT_WIDTH               1  /* CHG_BATT_HOT_EINT */
+#define WM831X_CHG_BATT_COLD_EINT               0x4000  /* CHG_BATT_COLD_EINT */
+#define WM831X_CHG_BATT_COLD_EINT_MASK          0x4000  /* CHG_BATT_COLD_EINT */
+#define WM831X_CHG_BATT_COLD_EINT_SHIFT             14  /* CHG_BATT_COLD_EINT */
+#define WM831X_CHG_BATT_COLD_EINT_WIDTH              1  /* CHG_BATT_COLD_EINT */
+#define WM831X_CHG_BATT_FAIL_EINT               0x2000  /* CHG_BATT_FAIL_EINT */
+#define WM831X_CHG_BATT_FAIL_EINT_MASK          0x2000  /* CHG_BATT_FAIL_EINT */
+#define WM831X_CHG_BATT_FAIL_EINT_SHIFT             13  /* CHG_BATT_FAIL_EINT */
+#define WM831X_CHG_BATT_FAIL_EINT_WIDTH              1  /* CHG_BATT_FAIL_EINT */
+#define WM831X_CHG_OV_EINT                      0x1000  /* CHG_OV_EINT */
+#define WM831X_CHG_OV_EINT_MASK                 0x1000  /* CHG_OV_EINT */
+#define WM831X_CHG_OV_EINT_SHIFT                    12  /* CHG_OV_EINT */
+#define WM831X_CHG_OV_EINT_WIDTH                     1  /* CHG_OV_EINT */
+#define WM831X_CHG_END_EINT                     0x0800  /* CHG_END_EINT */
+#define WM831X_CHG_END_EINT_MASK                0x0800  /* CHG_END_EINT */
+#define WM831X_CHG_END_EINT_SHIFT                   11  /* CHG_END_EINT */
+#define WM831X_CHG_END_EINT_WIDTH                    1  /* CHG_END_EINT */
+#define WM831X_CHG_TO_EINT                      0x0400  /* CHG_TO_EINT */
+#define WM831X_CHG_TO_EINT_MASK                 0x0400  /* CHG_TO_EINT */
+#define WM831X_CHG_TO_EINT_SHIFT                    10  /* CHG_TO_EINT */
+#define WM831X_CHG_TO_EINT_WIDTH                     1  /* CHG_TO_EINT */
+#define WM831X_CHG_MODE_EINT                    0x0200  /* CHG_MODE_EINT */
+#define WM831X_CHG_MODE_EINT_MASK               0x0200  /* CHG_MODE_EINT */
+#define WM831X_CHG_MODE_EINT_SHIFT                   9  /* CHG_MODE_EINT */
+#define WM831X_CHG_MODE_EINT_WIDTH                   1  /* CHG_MODE_EINT */
+#define WM831X_CHG_START_EINT                   0x0100  /* CHG_START_EINT */
+#define WM831X_CHG_START_EINT_MASK              0x0100  /* CHG_START_EINT */
+#define WM831X_CHG_START_EINT_SHIFT                  8  /* CHG_START_EINT */
+#define WM831X_CHG_START_EINT_WIDTH                  1  /* CHG_START_EINT */
+#define WM831X_CS2_EINT                         0x0080  /* CS2_EINT */
+#define WM831X_CS2_EINT_MASK                    0x0080  /* CS2_EINT */
+#define WM831X_CS2_EINT_SHIFT                        7  /* CS2_EINT */
+#define WM831X_CS2_EINT_WIDTH                        1  /* CS2_EINT */
+#define WM831X_CS1_EINT                         0x0040  /* CS1_EINT */
+#define WM831X_CS1_EINT_MASK                    0x0040  /* CS1_EINT */
+#define WM831X_CS1_EINT_SHIFT                        6  /* CS1_EINT */
+#define WM831X_CS1_EINT_WIDTH                        1  /* CS1_EINT */
+#define WM831X_OTP_CMD_END_EINT                 0x0020  /* OTP_CMD_END_EINT */
+#define WM831X_OTP_CMD_END_EINT_MASK            0x0020  /* OTP_CMD_END_EINT */
+#define WM831X_OTP_CMD_END_EINT_SHIFT                5  /* OTP_CMD_END_EINT */
+#define WM831X_OTP_CMD_END_EINT_WIDTH                1  /* OTP_CMD_END_EINT */
+#define WM831X_OTP_ERR_EINT                     0x0010  /* OTP_ERR_EINT */
+#define WM831X_OTP_ERR_EINT_MASK                0x0010  /* OTP_ERR_EINT */
+#define WM831X_OTP_ERR_EINT_SHIFT                    4  /* OTP_ERR_EINT */
+#define WM831X_OTP_ERR_EINT_WIDTH                    1  /* OTP_ERR_EINT */
+#define WM831X_PS_POR_EINT                      0x0004  /* PS_POR_EINT */
+#define WM831X_PS_POR_EINT_MASK                 0x0004  /* PS_POR_EINT */
+#define WM831X_PS_POR_EINT_SHIFT                     2  /* PS_POR_EINT */
+#define WM831X_PS_POR_EINT_WIDTH                     1  /* PS_POR_EINT */
+#define WM831X_PS_SLEEP_OFF_EINT                0x0002  /* PS_SLEEP_OFF_EINT */
+#define WM831X_PS_SLEEP_OFF_EINT_MASK           0x0002  /* PS_SLEEP_OFF_EINT */
+#define WM831X_PS_SLEEP_OFF_EINT_SHIFT               1  /* PS_SLEEP_OFF_EINT */
+#define WM831X_PS_SLEEP_OFF_EINT_WIDTH               1  /* PS_SLEEP_OFF_EINT */
+#define WM831X_PS_ON_WAKE_EINT                  0x0001  /* PS_ON_WAKE_EINT */
+#define WM831X_PS_ON_WAKE_EINT_MASK             0x0001  /* PS_ON_WAKE_EINT */
+#define WM831X_PS_ON_WAKE_EINT_SHIFT                 0  /* PS_ON_WAKE_EINT */
+#define WM831X_PS_ON_WAKE_EINT_WIDTH                 1  /* PS_ON_WAKE_EINT */
+
+/*
+ * R16403 (0x4013) - Interrupt Status 3
+ */
+#define WM831X_UV_LDO10_EINT                    0x0200  /* UV_LDO10_EINT */
+#define WM831X_UV_LDO10_EINT_MASK               0x0200  /* UV_LDO10_EINT */
+#define WM831X_UV_LDO10_EINT_SHIFT                   9  /* UV_LDO10_EINT */
+#define WM831X_UV_LDO10_EINT_WIDTH                   1  /* UV_LDO10_EINT */
+#define WM831X_UV_LDO9_EINT                     0x0100  /* UV_LDO9_EINT */
+#define WM831X_UV_LDO9_EINT_MASK                0x0100  /* UV_LDO9_EINT */
+#define WM831X_UV_LDO9_EINT_SHIFT                    8  /* UV_LDO9_EINT */
+#define WM831X_UV_LDO9_EINT_WIDTH                    1  /* UV_LDO9_EINT */
+#define WM831X_UV_LDO8_EINT                     0x0080  /* UV_LDO8_EINT */
+#define WM831X_UV_LDO8_EINT_MASK                0x0080  /* UV_LDO8_EINT */
+#define WM831X_UV_LDO8_EINT_SHIFT                    7  /* UV_LDO8_EINT */
+#define WM831X_UV_LDO8_EINT_WIDTH                    1  /* UV_LDO8_EINT */
+#define WM831X_UV_LDO7_EINT                     0x0040  /* UV_LDO7_EINT */
+#define WM831X_UV_LDO7_EINT_MASK                0x0040  /* UV_LDO7_EINT */
+#define WM831X_UV_LDO7_EINT_SHIFT                    6  /* UV_LDO7_EINT */
+#define WM831X_UV_LDO7_EINT_WIDTH                    1  /* UV_LDO7_EINT */
+#define WM831X_UV_LDO6_EINT                     0x0020  /* UV_LDO6_EINT */
+#define WM831X_UV_LDO6_EINT_MASK                0x0020  /* UV_LDO6_EINT */
+#define WM831X_UV_LDO6_EINT_SHIFT                    5  /* UV_LDO6_EINT */
+#define WM831X_UV_LDO6_EINT_WIDTH                    1  /* UV_LDO6_EINT */
+#define WM831X_UV_LDO5_EINT                     0x0010  /* UV_LDO5_EINT */
+#define WM831X_UV_LDO5_EINT_MASK                0x0010  /* UV_LDO5_EINT */
+#define WM831X_UV_LDO5_EINT_SHIFT                    4  /* UV_LDO5_EINT */
+#define WM831X_UV_LDO5_EINT_WIDTH                    1  /* UV_LDO5_EINT */
+#define WM831X_UV_LDO4_EINT                     0x0008  /* UV_LDO4_EINT */
+#define WM831X_UV_LDO4_EINT_MASK                0x0008  /* UV_LDO4_EINT */
+#define WM831X_UV_LDO4_EINT_SHIFT                    3  /* UV_LDO4_EINT */
+#define WM831X_UV_LDO4_EINT_WIDTH                    1  /* UV_LDO4_EINT */
+#define WM831X_UV_LDO3_EINT                     0x0004  /* UV_LDO3_EINT */
+#define WM831X_UV_LDO3_EINT_MASK                0x0004  /* UV_LDO3_EINT */
+#define WM831X_UV_LDO3_EINT_SHIFT                    2  /* UV_LDO3_EINT */
+#define WM831X_UV_LDO3_EINT_WIDTH                    1  /* UV_LDO3_EINT */
+#define WM831X_UV_LDO2_EINT                     0x0002  /* UV_LDO2_EINT */
+#define WM831X_UV_LDO2_EINT_MASK                0x0002  /* UV_LDO2_EINT */
+#define WM831X_UV_LDO2_EINT_SHIFT                    1  /* UV_LDO2_EINT */
+#define WM831X_UV_LDO2_EINT_WIDTH                    1  /* UV_LDO2_EINT */
+#define WM831X_UV_LDO1_EINT                     0x0001  /* UV_LDO1_EINT */
+#define WM831X_UV_LDO1_EINT_MASK                0x0001  /* UV_LDO1_EINT */
+#define WM831X_UV_LDO1_EINT_SHIFT                    0  /* UV_LDO1_EINT */
+#define WM831X_UV_LDO1_EINT_WIDTH                    1  /* UV_LDO1_EINT */
+
+/*
+ * R16404 (0x4014) - Interrupt Status 4
+ */
+#define WM831X_HC_DC2_EINT                      0x0200  /* HC_DC2_EINT */
+#define WM831X_HC_DC2_EINT_MASK                 0x0200  /* HC_DC2_EINT */
+#define WM831X_HC_DC2_EINT_SHIFT                     9  /* HC_DC2_EINT */
+#define WM831X_HC_DC2_EINT_WIDTH                     1  /* HC_DC2_EINT */
+#define WM831X_HC_DC1_EINT                      0x0100  /* HC_DC1_EINT */
+#define WM831X_HC_DC1_EINT_MASK                 0x0100  /* HC_DC1_EINT */
+#define WM831X_HC_DC1_EINT_SHIFT                     8  /* HC_DC1_EINT */
+#define WM831X_HC_DC1_EINT_WIDTH                     1  /* HC_DC1_EINT */
+#define WM831X_UV_DC4_EINT                      0x0008  /* UV_DC4_EINT */
+#define WM831X_UV_DC4_EINT_MASK                 0x0008  /* UV_DC4_EINT */
+#define WM831X_UV_DC4_EINT_SHIFT                     3  /* UV_DC4_EINT */
+#define WM831X_UV_DC4_EINT_WIDTH                     1  /* UV_DC4_EINT */
+#define WM831X_UV_DC3_EINT                      0x0004  /* UV_DC3_EINT */
+#define WM831X_UV_DC3_EINT_MASK                 0x0004  /* UV_DC3_EINT */
+#define WM831X_UV_DC3_EINT_SHIFT                     2  /* UV_DC3_EINT */
+#define WM831X_UV_DC3_EINT_WIDTH                     1  /* UV_DC3_EINT */
+#define WM831X_UV_DC2_EINT                      0x0002  /* UV_DC2_EINT */
+#define WM831X_UV_DC2_EINT_MASK                 0x0002  /* UV_DC2_EINT */
+#define WM831X_UV_DC2_EINT_SHIFT                     1  /* UV_DC2_EINT */
+#define WM831X_UV_DC2_EINT_WIDTH                     1  /* UV_DC2_EINT */
+#define WM831X_UV_DC1_EINT                      0x0001  /* UV_DC1_EINT */
+#define WM831X_UV_DC1_EINT_MASK                 0x0001  /* UV_DC1_EINT */
+#define WM831X_UV_DC1_EINT_SHIFT                     0  /* UV_DC1_EINT */
+#define WM831X_UV_DC1_EINT_WIDTH                     1  /* UV_DC1_EINT */
+
+/*
+ * R16405 (0x4015) - Interrupt Status 5
+ */
+#define WM831X_GP16_EINT                        0x8000  /* GP16_EINT */
+#define WM831X_GP16_EINT_MASK                   0x8000  /* GP16_EINT */
+#define WM831X_GP16_EINT_SHIFT                      15  /* GP16_EINT */
+#define WM831X_GP16_EINT_WIDTH                       1  /* GP16_EINT */
+#define WM831X_GP15_EINT                        0x4000  /* GP15_EINT */
+#define WM831X_GP15_EINT_MASK                   0x4000  /* GP15_EINT */
+#define WM831X_GP15_EINT_SHIFT                      14  /* GP15_EINT */
+#define WM831X_GP15_EINT_WIDTH                       1  /* GP15_EINT */
+#define WM831X_GP14_EINT                        0x2000  /* GP14_EINT */
+#define WM831X_GP14_EINT_MASK                   0x2000  /* GP14_EINT */
+#define WM831X_GP14_EINT_SHIFT                      13  /* GP14_EINT */
+#define WM831X_GP14_EINT_WIDTH                       1  /* GP14_EINT */
+#define WM831X_GP13_EINT                        0x1000  /* GP13_EINT */
+#define WM831X_GP13_EINT_MASK                   0x1000  /* GP13_EINT */
+#define WM831X_GP13_EINT_SHIFT                      12  /* GP13_EINT */
+#define WM831X_GP13_EINT_WIDTH                       1  /* GP13_EINT */
+#define WM831X_GP12_EINT                        0x0800  /* GP12_EINT */
+#define WM831X_GP12_EINT_MASK                   0x0800  /* GP12_EINT */
+#define WM831X_GP12_EINT_SHIFT                      11  /* GP12_EINT */
+#define WM831X_GP12_EINT_WIDTH                       1  /* GP12_EINT */
+#define WM831X_GP11_EINT                        0x0400  /* GP11_EINT */
+#define WM831X_GP11_EINT_MASK                   0x0400  /* GP11_EINT */
+#define WM831X_GP11_EINT_SHIFT                      10  /* GP11_EINT */
+#define WM831X_GP11_EINT_WIDTH                       1  /* GP11_EINT */
+#define WM831X_GP10_EINT                        0x0200  /* GP10_EINT */
+#define WM831X_GP10_EINT_MASK                   0x0200  /* GP10_EINT */
+#define WM831X_GP10_EINT_SHIFT                       9  /* GP10_EINT */
+#define WM831X_GP10_EINT_WIDTH                       1  /* GP10_EINT */
+#define WM831X_GP9_EINT                         0x0100  /* GP9_EINT */
+#define WM831X_GP9_EINT_MASK                    0x0100  /* GP9_EINT */
+#define WM831X_GP9_EINT_SHIFT                        8  /* GP9_EINT */
+#define WM831X_GP9_EINT_WIDTH                        1  /* GP9_EINT */
+#define WM831X_GP8_EINT                         0x0080  /* GP8_EINT */
+#define WM831X_GP8_EINT_MASK                    0x0080  /* GP8_EINT */
+#define WM831X_GP8_EINT_SHIFT                        7  /* GP8_EINT */
+#define WM831X_GP8_EINT_WIDTH                        1  /* GP8_EINT */
+#define WM831X_GP7_EINT                         0x0040  /* GP7_EINT */
+#define WM831X_GP7_EINT_MASK                    0x0040  /* GP7_EINT */
+#define WM831X_GP7_EINT_SHIFT                        6  /* GP7_EINT */
+#define WM831X_GP7_EINT_WIDTH                        1  /* GP7_EINT */
+#define WM831X_GP6_EINT                         0x0020  /* GP6_EINT */
+#define WM831X_GP6_EINT_MASK                    0x0020  /* GP6_EINT */
+#define WM831X_GP6_EINT_SHIFT                        5  /* GP6_EINT */
+#define WM831X_GP6_EINT_WIDTH                        1  /* GP6_EINT */
+#define WM831X_GP5_EINT                         0x0010  /* GP5_EINT */
+#define WM831X_GP5_EINT_MASK                    0x0010  /* GP5_EINT */
+#define WM831X_GP5_EINT_SHIFT                        4  /* GP5_EINT */
+#define WM831X_GP5_EINT_WIDTH                        1  /* GP5_EINT */
+#define WM831X_GP4_EINT                         0x0008  /* GP4_EINT */
+#define WM831X_GP4_EINT_MASK                    0x0008  /* GP4_EINT */
+#define WM831X_GP4_EINT_SHIFT                        3  /* GP4_EINT */
+#define WM831X_GP4_EINT_WIDTH                        1  /* GP4_EINT */
+#define WM831X_GP3_EINT                         0x0004  /* GP3_EINT */
+#define WM831X_GP3_EINT_MASK                    0x0004  /* GP3_EINT */
+#define WM831X_GP3_EINT_SHIFT                        2  /* GP3_EINT */
+#define WM831X_GP3_EINT_WIDTH                        1  /* GP3_EINT */
+#define WM831X_GP2_EINT                         0x0002  /* GP2_EINT */
+#define WM831X_GP2_EINT_MASK                    0x0002  /* GP2_EINT */
+#define WM831X_GP2_EINT_SHIFT                        1  /* GP2_EINT */
+#define WM831X_GP2_EINT_WIDTH                        1  /* GP2_EINT */
+#define WM831X_GP1_EINT                         0x0001  /* GP1_EINT */
+#define WM831X_GP1_EINT_MASK                    0x0001  /* GP1_EINT */
+#define WM831X_GP1_EINT_SHIFT                        0  /* GP1_EINT */
+#define WM831X_GP1_EINT_WIDTH                        1  /* GP1_EINT */
+
+/*
+ * R16407 (0x4017) - IRQ Config
+ */
+#define WM831X_IRQ_OD                           0x0002  /* IRQ_OD */
+#define WM831X_IRQ_OD_MASK                      0x0002  /* IRQ_OD */
+#define WM831X_IRQ_OD_SHIFT                          1  /* IRQ_OD */
+#define WM831X_IRQ_OD_WIDTH                          1  /* IRQ_OD */
+#define WM831X_IM_IRQ                           0x0001  /* IM_IRQ */
+#define WM831X_IM_IRQ_MASK                      0x0001  /* IM_IRQ */
+#define WM831X_IM_IRQ_SHIFT                          0  /* IM_IRQ */
+#define WM831X_IM_IRQ_WIDTH                          1  /* IM_IRQ */
+
+/*
+ * R16408 (0x4018) - System Interrupts Mask
+ */
+#define WM831X_IM_PS_INT                        0x8000  /* IM_PS_INT */
+#define WM831X_IM_PS_INT_MASK                   0x8000  /* IM_PS_INT */
+#define WM831X_IM_PS_INT_SHIFT                      15  /* IM_PS_INT */
+#define WM831X_IM_PS_INT_WIDTH                       1  /* IM_PS_INT */
+#define WM831X_IM_TEMP_INT                      0x4000  /* IM_TEMP_INT */
+#define WM831X_IM_TEMP_INT_MASK                 0x4000  /* IM_TEMP_INT */
+#define WM831X_IM_TEMP_INT_SHIFT                    14  /* IM_TEMP_INT */
+#define WM831X_IM_TEMP_INT_WIDTH                     1  /* IM_TEMP_INT */
+#define WM831X_IM_GP_INT                        0x2000  /* IM_GP_INT */
+#define WM831X_IM_GP_INT_MASK                   0x2000  /* IM_GP_INT */
+#define WM831X_IM_GP_INT_SHIFT                      13  /* IM_GP_INT */
+#define WM831X_IM_GP_INT_WIDTH                       1  /* IM_GP_INT */
+#define WM831X_IM_ON_PIN_INT                    0x1000  /* IM_ON_PIN_INT */
+#define WM831X_IM_ON_PIN_INT_MASK               0x1000  /* IM_ON_PIN_INT */
+#define WM831X_IM_ON_PIN_INT_SHIFT                  12  /* IM_ON_PIN_INT */
+#define WM831X_IM_ON_PIN_INT_WIDTH                   1  /* IM_ON_PIN_INT */
+#define WM831X_IM_WDOG_INT                      0x0800  /* IM_WDOG_INT */
+#define WM831X_IM_WDOG_INT_MASK                 0x0800  /* IM_WDOG_INT */
+#define WM831X_IM_WDOG_INT_SHIFT                    11  /* IM_WDOG_INT */
+#define WM831X_IM_WDOG_INT_WIDTH                     1  /* IM_WDOG_INT */
+#define WM831X_IM_TCHDATA_INT                   0x0400  /* IM_TCHDATA_INT */
+#define WM831X_IM_TCHDATA_INT_MASK              0x0400  /* IM_TCHDATA_INT */
+#define WM831X_IM_TCHDATA_INT_SHIFT                 10  /* IM_TCHDATA_INT */
+#define WM831X_IM_TCHDATA_INT_WIDTH                  1  /* IM_TCHDATA_INT */
+#define WM831X_IM_TCHPD_INT                     0x0200  /* IM_TCHPD_INT */
+#define WM831X_IM_TCHPD_INT_MASK                0x0200  /* IM_TCHPD_INT */
+#define WM831X_IM_TCHPD_INT_SHIFT                    9  /* IM_TCHPD_INT */
+#define WM831X_IM_TCHPD_INT_WIDTH                    1  /* IM_TCHPD_INT */
+#define WM831X_IM_AUXADC_INT                    0x0100  /* IM_AUXADC_INT */
+#define WM831X_IM_AUXADC_INT_MASK               0x0100  /* IM_AUXADC_INT */
+#define WM831X_IM_AUXADC_INT_SHIFT                   8  /* IM_AUXADC_INT */
+#define WM831X_IM_AUXADC_INT_WIDTH                   1  /* IM_AUXADC_INT */
+#define WM831X_IM_PPM_INT                       0x0080  /* IM_PPM_INT */
+#define WM831X_IM_PPM_INT_MASK                  0x0080  /* IM_PPM_INT */
+#define WM831X_IM_PPM_INT_SHIFT                      7  /* IM_PPM_INT */
+#define WM831X_IM_PPM_INT_WIDTH                      1  /* IM_PPM_INT */
+#define WM831X_IM_CS_INT                        0x0040  /* IM_CS_INT */
+#define WM831X_IM_CS_INT_MASK                   0x0040  /* IM_CS_INT */
+#define WM831X_IM_CS_INT_SHIFT                       6  /* IM_CS_INT */
+#define WM831X_IM_CS_INT_WIDTH                       1  /* IM_CS_INT */
+#define WM831X_IM_RTC_INT                       0x0020  /* IM_RTC_INT */
+#define WM831X_IM_RTC_INT_MASK                  0x0020  /* IM_RTC_INT */
+#define WM831X_IM_RTC_INT_SHIFT                      5  /* IM_RTC_INT */
+#define WM831X_IM_RTC_INT_WIDTH                      1  /* IM_RTC_INT */
+#define WM831X_IM_OTP_INT                       0x0010  /* IM_OTP_INT */
+#define WM831X_IM_OTP_INT_MASK                  0x0010  /* IM_OTP_INT */
+#define WM831X_IM_OTP_INT_SHIFT                      4  /* IM_OTP_INT */
+#define WM831X_IM_OTP_INT_WIDTH                      1  /* IM_OTP_INT */
+#define WM831X_IM_CHILD_INT                     0x0008  /* IM_CHILD_INT */
+#define WM831X_IM_CHILD_INT_MASK                0x0008  /* IM_CHILD_INT */
+#define WM831X_IM_CHILD_INT_SHIFT                    3  /* IM_CHILD_INT */
+#define WM831X_IM_CHILD_INT_WIDTH                    1  /* IM_CHILD_INT */
+#define WM831X_IM_CHG_INT                       0x0004  /* IM_CHG_INT */
+#define WM831X_IM_CHG_INT_MASK                  0x0004  /* IM_CHG_INT */
+#define WM831X_IM_CHG_INT_SHIFT                      2  /* IM_CHG_INT */
+#define WM831X_IM_CHG_INT_WIDTH                      1  /* IM_CHG_INT */
+#define WM831X_IM_HC_INT                        0x0002  /* IM_HC_INT */
+#define WM831X_IM_HC_INT_MASK                   0x0002  /* IM_HC_INT */
+#define WM831X_IM_HC_INT_SHIFT                       1  /* IM_HC_INT */
+#define WM831X_IM_HC_INT_WIDTH                       1  /* IM_HC_INT */
+#define WM831X_IM_UV_INT                        0x0001  /* IM_UV_INT */
+#define WM831X_IM_UV_INT_MASK                   0x0001  /* IM_UV_INT */
+#define WM831X_IM_UV_INT_SHIFT                       0  /* IM_UV_INT */
+#define WM831X_IM_UV_INT_WIDTH                       1  /* IM_UV_INT */
+
+/*
+ * R16409 (0x4019) - Interrupt Status 1 Mask
+ */
+#define WM831X_IM_PPM_SYSLO_EINT                0x8000  /* IM_PPM_SYSLO_EINT */
+#define WM831X_IM_PPM_SYSLO_EINT_MASK           0x8000  /* IM_PPM_SYSLO_EINT */
+#define WM831X_IM_PPM_SYSLO_EINT_SHIFT              15  /* IM_PPM_SYSLO_EINT */
+#define WM831X_IM_PPM_SYSLO_EINT_WIDTH               1  /* IM_PPM_SYSLO_EINT */
+#define WM831X_IM_PPM_PWR_SRC_EINT              0x4000  /* IM_PPM_PWR_SRC_EINT */
+#define WM831X_IM_PPM_PWR_SRC_EINT_MASK         0x4000  /* IM_PPM_PWR_SRC_EINT */
+#define WM831X_IM_PPM_PWR_SRC_EINT_SHIFT            14  /* IM_PPM_PWR_SRC_EINT */
+#define WM831X_IM_PPM_PWR_SRC_EINT_WIDTH             1  /* IM_PPM_PWR_SRC_EINT */
+#define WM831X_IM_PPM_USB_CURR_EINT             0x2000  /* IM_PPM_USB_CURR_EINT */
+#define WM831X_IM_PPM_USB_CURR_EINT_MASK        0x2000  /* IM_PPM_USB_CURR_EINT */
+#define WM831X_IM_PPM_USB_CURR_EINT_SHIFT           13  /* IM_PPM_USB_CURR_EINT */
+#define WM831X_IM_PPM_USB_CURR_EINT_WIDTH            1  /* IM_PPM_USB_CURR_EINT */
+#define WM831X_IM_ON_PIN_EINT                   0x1000  /* IM_ON_PIN_EINT */
+#define WM831X_IM_ON_PIN_EINT_MASK              0x1000  /* IM_ON_PIN_EINT */
+#define WM831X_IM_ON_PIN_EINT_SHIFT                 12  /* IM_ON_PIN_EINT */
+#define WM831X_IM_ON_PIN_EINT_WIDTH                  1  /* IM_ON_PIN_EINT */
+#define WM831X_IM_WDOG_TO_EINT                  0x0800  /* IM_WDOG_TO_EINT */
+#define WM831X_IM_WDOG_TO_EINT_MASK             0x0800  /* IM_WDOG_TO_EINT */
+#define WM831X_IM_WDOG_TO_EINT_SHIFT                11  /* IM_WDOG_TO_EINT */
+#define WM831X_IM_WDOG_TO_EINT_WIDTH                 1  /* IM_WDOG_TO_EINT */
+#define WM831X_IM_TCHDATA_EINT                  0x0400  /* IM_TCHDATA_EINT */
+#define WM831X_IM_TCHDATA_EINT_MASK             0x0400  /* IM_TCHDATA_EINT */
+#define WM831X_IM_TCHDATA_EINT_SHIFT                10  /* IM_TCHDATA_EINT */
+#define WM831X_IM_TCHDATA_EINT_WIDTH                 1  /* IM_TCHDATA_EINT */
+#define WM831X_IM_TCHPD_EINT                    0x0200  /* IM_TCHPD_EINT */
+#define WM831X_IM_TCHPD_EINT_MASK               0x0200  /* IM_TCHPD_EINT */
+#define WM831X_IM_TCHPD_EINT_SHIFT                   9  /* IM_TCHPD_EINT */
+#define WM831X_IM_TCHPD_EINT_WIDTH                   1  /* IM_TCHPD_EINT */
+#define WM831X_IM_AUXADC_DATA_EINT              0x0100  /* IM_AUXADC_DATA_EINT */
+#define WM831X_IM_AUXADC_DATA_EINT_MASK         0x0100  /* IM_AUXADC_DATA_EINT */
+#define WM831X_IM_AUXADC_DATA_EINT_SHIFT             8  /* IM_AUXADC_DATA_EINT */
+#define WM831X_IM_AUXADC_DATA_EINT_WIDTH             1  /* IM_AUXADC_DATA_EINT */
+#define WM831X_IM_AUXADC_DCOMP4_EINT            0x0080  /* IM_AUXADC_DCOMP4_EINT */
+#define WM831X_IM_AUXADC_DCOMP4_EINT_MASK       0x0080  /* IM_AUXADC_DCOMP4_EINT */
+#define WM831X_IM_AUXADC_DCOMP4_EINT_SHIFT           7  /* IM_AUXADC_DCOMP4_EINT */
+#define WM831X_IM_AUXADC_DCOMP4_EINT_WIDTH           1  /* IM_AUXADC_DCOMP4_EINT */
+#define WM831X_IM_AUXADC_DCOMP3_EINT            0x0040  /* IM_AUXADC_DCOMP3_EINT */
+#define WM831X_IM_AUXADC_DCOMP3_EINT_MASK       0x0040  /* IM_AUXADC_DCOMP3_EINT */
+#define WM831X_IM_AUXADC_DCOMP3_EINT_SHIFT           6  /* IM_AUXADC_DCOMP3_EINT */
+#define WM831X_IM_AUXADC_DCOMP3_EINT_WIDTH           1  /* IM_AUXADC_DCOMP3_EINT */
+#define WM831X_IM_AUXADC_DCOMP2_EINT            0x0020  /* IM_AUXADC_DCOMP2_EINT */
+#define WM831X_IM_AUXADC_DCOMP2_EINT_MASK       0x0020  /* IM_AUXADC_DCOMP2_EINT */
+#define WM831X_IM_AUXADC_DCOMP2_EINT_SHIFT           5  /* IM_AUXADC_DCOMP2_EINT */
+#define WM831X_IM_AUXADC_DCOMP2_EINT_WIDTH           1  /* IM_AUXADC_DCOMP2_EINT */
+#define WM831X_IM_AUXADC_DCOMP1_EINT            0x0010  /* IM_AUXADC_DCOMP1_EINT */
+#define WM831X_IM_AUXADC_DCOMP1_EINT_MASK       0x0010  /* IM_AUXADC_DCOMP1_EINT */
+#define WM831X_IM_AUXADC_DCOMP1_EINT_SHIFT           4  /* IM_AUXADC_DCOMP1_EINT */
+#define WM831X_IM_AUXADC_DCOMP1_EINT_WIDTH           1  /* IM_AUXADC_DCOMP1_EINT */
+#define WM831X_IM_RTC_PER_EINT                  0x0008  /* IM_RTC_PER_EINT */
+#define WM831X_IM_RTC_PER_EINT_MASK             0x0008  /* IM_RTC_PER_EINT */
+#define WM831X_IM_RTC_PER_EINT_SHIFT                 3  /* IM_RTC_PER_EINT */
+#define WM831X_IM_RTC_PER_EINT_WIDTH                 1  /* IM_RTC_PER_EINT */
+#define WM831X_IM_RTC_ALM_EINT                  0x0004  /* IM_RTC_ALM_EINT */
+#define WM831X_IM_RTC_ALM_EINT_MASK             0x0004  /* IM_RTC_ALM_EINT */
+#define WM831X_IM_RTC_ALM_EINT_SHIFT                 2  /* IM_RTC_ALM_EINT */
+#define WM831X_IM_RTC_ALM_EINT_WIDTH                 1  /* IM_RTC_ALM_EINT */
+#define WM831X_IM_TEMP_THW_EINT                 0x0002  /* IM_TEMP_THW_EINT */
+#define WM831X_IM_TEMP_THW_EINT_MASK            0x0002  /* IM_TEMP_THW_EINT */
+#define WM831X_IM_TEMP_THW_EINT_SHIFT                1  /* IM_TEMP_THW_EINT */
+#define WM831X_IM_TEMP_THW_EINT_WIDTH                1  /* IM_TEMP_THW_EINT */
+
+/*
+ * R16410 (0x401A) - Interrupt Status 2 Mask
+ */
+#define WM831X_IM_CHG_BATT_HOT_EINT             0x8000  /* IM_CHG_BATT_HOT_EINT */
+#define WM831X_IM_CHG_BATT_HOT_EINT_MASK        0x8000  /* IM_CHG_BATT_HOT_EINT */
+#define WM831X_IM_CHG_BATT_HOT_EINT_SHIFT           15  /* IM_CHG_BATT_HOT_EINT */
+#define WM831X_IM_CHG_BATT_HOT_EINT_WIDTH            1  /* IM_CHG_BATT_HOT_EINT */
+#define WM831X_IM_CHG_BATT_COLD_EINT            0x4000  /* IM_CHG_BATT_COLD_EINT */
+#define WM831X_IM_CHG_BATT_COLD_EINT_MASK       0x4000  /* IM_CHG_BATT_COLD_EINT */
+#define WM831X_IM_CHG_BATT_COLD_EINT_SHIFT          14  /* IM_CHG_BATT_COLD_EINT */
+#define WM831X_IM_CHG_BATT_COLD_EINT_WIDTH           1  /* IM_CHG_BATT_COLD_EINT */
+#define WM831X_IM_CHG_BATT_FAIL_EINT            0x2000  /* IM_CHG_BATT_FAIL_EINT */
+#define WM831X_IM_CHG_BATT_FAIL_EINT_MASK       0x2000  /* IM_CHG_BATT_FAIL_EINT */
+#define WM831X_IM_CHG_BATT_FAIL_EINT_SHIFT          13  /* IM_CHG_BATT_FAIL_EINT */
+#define WM831X_IM_CHG_BATT_FAIL_EINT_WIDTH           1  /* IM_CHG_BATT_FAIL_EINT */
+#define WM831X_IM_CHG_OV_EINT                   0x1000  /* IM_CHG_OV_EINT */
+#define WM831X_IM_CHG_OV_EINT_MASK              0x1000  /* IM_CHG_OV_EINT */
+#define WM831X_IM_CHG_OV_EINT_SHIFT                 12  /* IM_CHG_OV_EINT */
+#define WM831X_IM_CHG_OV_EINT_WIDTH                  1  /* IM_CHG_OV_EINT */
+#define WM831X_IM_CHG_END_EINT                  0x0800  /* IM_CHG_END_EINT */
+#define WM831X_IM_CHG_END_EINT_MASK             0x0800  /* IM_CHG_END_EINT */
+#define WM831X_IM_CHG_END_EINT_SHIFT                11  /* IM_CHG_END_EINT */
+#define WM831X_IM_CHG_END_EINT_WIDTH                 1  /* IM_CHG_END_EINT */
+#define WM831X_IM_CHG_TO_EINT                   0x0400  /* IM_CHG_TO_EINT */
+#define WM831X_IM_CHG_TO_EINT_MASK              0x0400  /* IM_CHG_TO_EINT */
+#define WM831X_IM_CHG_TO_EINT_SHIFT                 10  /* IM_CHG_TO_EINT */
+#define WM831X_IM_CHG_TO_EINT_WIDTH                  1  /* IM_CHG_TO_EINT */
+#define WM831X_IM_CHG_MODE_EINT                 0x0200  /* IM_CHG_MODE_EINT */
+#define WM831X_IM_CHG_MODE_EINT_MASK            0x0200  /* IM_CHG_MODE_EINT */
+#define WM831X_IM_CHG_MODE_EINT_SHIFT                9  /* IM_CHG_MODE_EINT */
+#define WM831X_IM_CHG_MODE_EINT_WIDTH                1  /* IM_CHG_MODE_EINT */
+#define WM831X_IM_CHG_START_EINT                0x0100  /* IM_CHG_START_EINT */
+#define WM831X_IM_CHG_START_EINT_MASK           0x0100  /* IM_CHG_START_EINT */
+#define WM831X_IM_CHG_START_EINT_SHIFT               8  /* IM_CHG_START_EINT */
+#define WM831X_IM_CHG_START_EINT_WIDTH               1  /* IM_CHG_START_EINT */
+#define WM831X_IM_CS2_EINT                      0x0080  /* IM_CS2_EINT */
+#define WM831X_IM_CS2_EINT_MASK                 0x0080  /* IM_CS2_EINT */
+#define WM831X_IM_CS2_EINT_SHIFT                     7  /* IM_CS2_EINT */
+#define WM831X_IM_CS2_EINT_WIDTH                     1  /* IM_CS2_EINT */
+#define WM831X_IM_CS1_EINT                      0x0040  /* IM_CS1_EINT */
+#define WM831X_IM_CS1_EINT_MASK                 0x0040  /* IM_CS1_EINT */
+#define WM831X_IM_CS1_EINT_SHIFT                     6  /* IM_CS1_EINT */
+#define WM831X_IM_CS1_EINT_WIDTH                     1  /* IM_CS1_EINT */
+#define WM831X_IM_OTP_CMD_END_EINT              0x0020  /* IM_OTP_CMD_END_EINT */
+#define WM831X_IM_OTP_CMD_END_EINT_MASK         0x0020  /* IM_OTP_CMD_END_EINT */
+#define WM831X_IM_OTP_CMD_END_EINT_SHIFT             5  /* IM_OTP_CMD_END_EINT */
+#define WM831X_IM_OTP_CMD_END_EINT_WIDTH             1  /* IM_OTP_CMD_END_EINT */
+#define WM831X_IM_OTP_ERR_EINT                  0x0010  /* IM_OTP_ERR_EINT */
+#define WM831X_IM_OTP_ERR_EINT_MASK             0x0010  /* IM_OTP_ERR_EINT */
+#define WM831X_IM_OTP_ERR_EINT_SHIFT                 4  /* IM_OTP_ERR_EINT */
+#define WM831X_IM_OTP_ERR_EINT_WIDTH                 1  /* IM_OTP_ERR_EINT */
+#define WM831X_IM_PS_POR_EINT                   0x0004  /* IM_PS_POR_EINT */
+#define WM831X_IM_PS_POR_EINT_MASK              0x0004  /* IM_PS_POR_EINT */
+#define WM831X_IM_PS_POR_EINT_SHIFT                  2  /* IM_PS_POR_EINT */
+#define WM831X_IM_PS_POR_EINT_WIDTH                  1  /* IM_PS_POR_EINT */
+#define WM831X_IM_PS_SLEEP_OFF_EINT             0x0002  /* IM_PS_SLEEP_OFF_EINT */
+#define WM831X_IM_PS_SLEEP_OFF_EINT_MASK        0x0002  /* IM_PS_SLEEP_OFF_EINT */
+#define WM831X_IM_PS_SLEEP_OFF_EINT_SHIFT            1  /* IM_PS_SLEEP_OFF_EINT */
+#define WM831X_IM_PS_SLEEP_OFF_EINT_WIDTH            1  /* IM_PS_SLEEP_OFF_EINT */
+#define WM831X_IM_PS_ON_WAKE_EINT               0x0001  /* IM_PS_ON_WAKE_EINT */
+#define WM831X_IM_PS_ON_WAKE_EINT_MASK          0x0001  /* IM_PS_ON_WAKE_EINT */
+#define WM831X_IM_PS_ON_WAKE_EINT_SHIFT              0  /* IM_PS_ON_WAKE_EINT */
+#define WM831X_IM_PS_ON_WAKE_EINT_WIDTH              1  /* IM_PS_ON_WAKE_EINT */
+
+/*
+ * R16411 (0x401B) - Interrupt Status 3 Mask
+ */
+#define WM831X_IM_UV_LDO10_EINT                 0x0200  /* IM_UV_LDO10_EINT */
+#define WM831X_IM_UV_LDO10_EINT_MASK            0x0200  /* IM_UV_LDO10_EINT */
+#define WM831X_IM_UV_LDO10_EINT_SHIFT                9  /* IM_UV_LDO10_EINT */
+#define WM831X_IM_UV_LDO10_EINT_WIDTH                1  /* IM_UV_LDO10_EINT */
+#define WM831X_IM_UV_LDO9_EINT                  0x0100  /* IM_UV_LDO9_EINT */
+#define WM831X_IM_UV_LDO9_EINT_MASK             0x0100  /* IM_UV_LDO9_EINT */
+#define WM831X_IM_UV_LDO9_EINT_SHIFT                 8  /* IM_UV_LDO9_EINT */
+#define WM831X_IM_UV_LDO9_EINT_WIDTH                 1  /* IM_UV_LDO9_EINT */
+#define WM831X_IM_UV_LDO8_EINT                  0x0080  /* IM_UV_LDO8_EINT */
+#define WM831X_IM_UV_LDO8_EINT_MASK             0x0080  /* IM_UV_LDO8_EINT */
+#define WM831X_IM_UV_LDO8_EINT_SHIFT                 7  /* IM_UV_LDO8_EINT */
+#define WM831X_IM_UV_LDO8_EINT_WIDTH                 1  /* IM_UV_LDO8_EINT */
+#define WM831X_IM_UV_LDO7_EINT                  0x0040  /* IM_UV_LDO7_EINT */
+#define WM831X_IM_UV_LDO7_EINT_MASK             0x0040  /* IM_UV_LDO7_EINT */
+#define WM831X_IM_UV_LDO7_EINT_SHIFT                 6  /* IM_UV_LDO7_EINT */
+#define WM831X_IM_UV_LDO7_EINT_WIDTH                 1  /* IM_UV_LDO7_EINT */
+#define WM831X_IM_UV_LDO6_EINT                  0x0020  /* IM_UV_LDO6_EINT */
+#define WM831X_IM_UV_LDO6_EINT_MASK             0x0020  /* IM_UV_LDO6_EINT */
+#define WM831X_IM_UV_LDO6_EINT_SHIFT                 5  /* IM_UV_LDO6_EINT */
+#define WM831X_IM_UV_LDO6_EINT_WIDTH                 1  /* IM_UV_LDO6_EINT */
+#define WM831X_IM_UV_LDO5_EINT                  0x0010  /* IM_UV_LDO5_EINT */
+#define WM831X_IM_UV_LDO5_EINT_MASK             0x0010  /* IM_UV_LDO5_EINT */
+#define WM831X_IM_UV_LDO5_EINT_SHIFT                 4  /* IM_UV_LDO5_EINT */
+#define WM831X_IM_UV_LDO5_EINT_WIDTH                 1  /* IM_UV_LDO5_EINT */
+#define WM831X_IM_UV_LDO4_EINT                  0x0008  /* IM_UV_LDO4_EINT */
+#define WM831X_IM_UV_LDO4_EINT_MASK             0x0008  /* IM_UV_LDO4_EINT */
+#define WM831X_IM_UV_LDO4_EINT_SHIFT                 3  /* IM_UV_LDO4_EINT */
+#define WM831X_IM_UV_LDO4_EINT_WIDTH                 1  /* IM_UV_LDO4_EINT */
+#define WM831X_IM_UV_LDO3_EINT                  0x0004  /* IM_UV_LDO3_EINT */
+#define WM831X_IM_UV_LDO3_EINT_MASK             0x0004  /* IM_UV_LDO3_EINT */
+#define WM831X_IM_UV_LDO3_EINT_SHIFT                 2  /* IM_UV_LDO3_EINT */
+#define WM831X_IM_UV_LDO3_EINT_WIDTH                 1  /* IM_UV_LDO3_EINT */
+#define WM831X_IM_UV_LDO2_EINT                  0x0002  /* IM_UV_LDO2_EINT */
+#define WM831X_IM_UV_LDO2_EINT_MASK             0x0002  /* IM_UV_LDO2_EINT */
+#define WM831X_IM_UV_LDO2_EINT_SHIFT                 1  /* IM_UV_LDO2_EINT */
+#define WM831X_IM_UV_LDO2_EINT_WIDTH                 1  /* IM_UV_LDO2_EINT */
+#define WM831X_IM_UV_LDO1_EINT                  0x0001  /* IM_UV_LDO1_EINT */
+#define WM831X_IM_UV_LDO1_EINT_MASK             0x0001  /* IM_UV_LDO1_EINT */
+#define WM831X_IM_UV_LDO1_EINT_SHIFT                 0  /* IM_UV_LDO1_EINT */
+#define WM831X_IM_UV_LDO1_EINT_WIDTH                 1  /* IM_UV_LDO1_EINT */
+
+/*
+ * R16412 (0x401C) - Interrupt Status 4 Mask
+ */
+#define WM831X_IM_HC_DC2_EINT                   0x0200  /* IM_HC_DC2_EINT */
+#define WM831X_IM_HC_DC2_EINT_MASK              0x0200  /* IM_HC_DC2_EINT */
+#define WM831X_IM_HC_DC2_EINT_SHIFT                  9  /* IM_HC_DC2_EINT */
+#define WM831X_IM_HC_DC2_EINT_WIDTH                  1  /* IM_HC_DC2_EINT */
+#define WM831X_IM_HC_DC1_EINT                   0x0100  /* IM_HC_DC1_EINT */
+#define WM831X_IM_HC_DC1_EINT_MASK              0x0100  /* IM_HC_DC1_EINT */
+#define WM831X_IM_HC_DC1_EINT_SHIFT                  8  /* IM_HC_DC1_EINT */
+#define WM831X_IM_HC_DC1_EINT_WIDTH                  1  /* IM_HC_DC1_EINT */
+#define WM831X_IM_UV_DC4_EINT                   0x0008  /* IM_UV_DC4_EINT */
+#define WM831X_IM_UV_DC4_EINT_MASK              0x0008  /* IM_UV_DC4_EINT */
+#define WM831X_IM_UV_DC4_EINT_SHIFT                  3  /* IM_UV_DC4_EINT */
+#define WM831X_IM_UV_DC4_EINT_WIDTH                  1  /* IM_UV_DC4_EINT */
+#define WM831X_IM_UV_DC3_EINT                   0x0004  /* IM_UV_DC3_EINT */
+#define WM831X_IM_UV_DC3_EINT_MASK              0x0004  /* IM_UV_DC3_EINT */
+#define WM831X_IM_UV_DC3_EINT_SHIFT                  2  /* IM_UV_DC3_EINT */
+#define WM831X_IM_UV_DC3_EINT_WIDTH                  1  /* IM_UV_DC3_EINT */
+#define WM831X_IM_UV_DC2_EINT                   0x0002  /* IM_UV_DC2_EINT */
+#define WM831X_IM_UV_DC2_EINT_MASK              0x0002  /* IM_UV_DC2_EINT */
+#define WM831X_IM_UV_DC2_EINT_SHIFT                  1  /* IM_UV_DC2_EINT */
+#define WM831X_IM_UV_DC2_EINT_WIDTH                  1  /* IM_UV_DC2_EINT */
+#define WM831X_IM_UV_DC1_EINT                   0x0001  /* IM_UV_DC1_EINT */
+#define WM831X_IM_UV_DC1_EINT_MASK              0x0001  /* IM_UV_DC1_EINT */
+#define WM831X_IM_UV_DC1_EINT_SHIFT                  0  /* IM_UV_DC1_EINT */
+#define WM831X_IM_UV_DC1_EINT_WIDTH                  1  /* IM_UV_DC1_EINT */
+
+/*
+ * R16413 (0x401D) - Interrupt Status 5 Mask
+ */
+#define WM831X_IM_GP16_EINT                     0x8000  /* IM_GP16_EINT */
+#define WM831X_IM_GP16_EINT_MASK                0x8000  /* IM_GP16_EINT */
+#define WM831X_IM_GP16_EINT_SHIFT                   15  /* IM_GP16_EINT */
+#define WM831X_IM_GP16_EINT_WIDTH                    1  /* IM_GP16_EINT */
+#define WM831X_IM_GP15_EINT                     0x4000  /* IM_GP15_EINT */
+#define WM831X_IM_GP15_EINT_MASK                0x4000  /* IM_GP15_EINT */
+#define WM831X_IM_GP15_EINT_SHIFT                   14  /* IM_GP15_EINT */
+#define WM831X_IM_GP15_EINT_WIDTH                    1  /* IM_GP15_EINT */
+#define WM831X_IM_GP14_EINT                     0x2000  /* IM_GP14_EINT */
+#define WM831X_IM_GP14_EINT_MASK                0x2000  /* IM_GP14_EINT */
+#define WM831X_IM_GP14_EINT_SHIFT                   13  /* IM_GP14_EINT */
+#define WM831X_IM_GP14_EINT_WIDTH                    1  /* IM_GP14_EINT */
+#define WM831X_IM_GP13_EINT                     0x1000  /* IM_GP13_EINT */
+#define WM831X_IM_GP13_EINT_MASK                0x1000  /* IM_GP13_EINT */
+#define WM831X_IM_GP13_EINT_SHIFT                   12  /* IM_GP13_EINT */
+#define WM831X_IM_GP13_EINT_WIDTH                    1  /* IM_GP13_EINT */
+#define WM831X_IM_GP12_EINT                     0x0800  /* IM_GP12_EINT */
+#define WM831X_IM_GP12_EINT_MASK                0x0800  /* IM_GP12_EINT */
+#define WM831X_IM_GP12_EINT_SHIFT                   11  /* IM_GP12_EINT */
+#define WM831X_IM_GP12_EINT_WIDTH                    1  /* IM_GP12_EINT */
+#define WM831X_IM_GP11_EINT                     0x0400  /* IM_GP11_EINT */
+#define WM831X_IM_GP11_EINT_MASK                0x0400  /* IM_GP11_EINT */
+#define WM831X_IM_GP11_EINT_SHIFT                   10  /* IM_GP11_EINT */
+#define WM831X_IM_GP11_EINT_WIDTH                    1  /* IM_GP11_EINT */
+#define WM831X_IM_GP10_EINT                     0x0200  /* IM_GP10_EINT */
+#define WM831X_IM_GP10_EINT_MASK                0x0200  /* IM_GP10_EINT */
+#define WM831X_IM_GP10_EINT_SHIFT                    9  /* IM_GP10_EINT */
+#define WM831X_IM_GP10_EINT_WIDTH                    1  /* IM_GP10_EINT */
+#define WM831X_IM_GP9_EINT                      0x0100  /* IM_GP9_EINT */
+#define WM831X_IM_GP9_EINT_MASK                 0x0100  /* IM_GP9_EINT */
+#define WM831X_IM_GP9_EINT_SHIFT                     8  /* IM_GP9_EINT */
+#define WM831X_IM_GP9_EINT_WIDTH                     1  /* IM_GP9_EINT */
+#define WM831X_IM_GP8_EINT                      0x0080  /* IM_GP8_EINT */
+#define WM831X_IM_GP8_EINT_MASK                 0x0080  /* IM_GP8_EINT */
+#define WM831X_IM_GP8_EINT_SHIFT                     7  /* IM_GP8_EINT */
+#define WM831X_IM_GP8_EINT_WIDTH                     1  /* IM_GP8_EINT */
+#define WM831X_IM_GP7_EINT                      0x0040  /* IM_GP7_EINT */
+#define WM831X_IM_GP7_EINT_MASK                 0x0040  /* IM_GP7_EINT */
+#define WM831X_IM_GP7_EINT_SHIFT                     6  /* IM_GP7_EINT */
+#define WM831X_IM_GP7_EINT_WIDTH                     1  /* IM_GP7_EINT */
+#define WM831X_IM_GP6_EINT                      0x0020  /* IM_GP6_EINT */
+#define WM831X_IM_GP6_EINT_MASK                 0x0020  /* IM_GP6_EINT */
+#define WM831X_IM_GP6_EINT_SHIFT                     5  /* IM_GP6_EINT */
+#define WM831X_IM_GP6_EINT_WIDTH                     1  /* IM_GP6_EINT */
+#define WM831X_IM_GP5_EINT                      0x0010  /* IM_GP5_EINT */
+#define WM831X_IM_GP5_EINT_MASK                 0x0010  /* IM_GP5_EINT */
+#define WM831X_IM_GP5_EINT_SHIFT                     4  /* IM_GP5_EINT */
+#define WM831X_IM_GP5_EINT_WIDTH                     1  /* IM_GP5_EINT */
+#define WM831X_IM_GP4_EINT                      0x0008  /* IM_GP4_EINT */
+#define WM831X_IM_GP4_EINT_MASK                 0x0008  /* IM_GP4_EINT */
+#define WM831X_IM_GP4_EINT_SHIFT                     3  /* IM_GP4_EINT */
+#define WM831X_IM_GP4_EINT_WIDTH                     1  /* IM_GP4_EINT */
+#define WM831X_IM_GP3_EINT                      0x0004  /* IM_GP3_EINT */
+#define WM831X_IM_GP3_EINT_MASK                 0x0004  /* IM_GP3_EINT */
+#define WM831X_IM_GP3_EINT_SHIFT                     2  /* IM_GP3_EINT */
+#define WM831X_IM_GP3_EINT_WIDTH                     1  /* IM_GP3_EINT */
+#define WM831X_IM_GP2_EINT                      0x0002  /* IM_GP2_EINT */
+#define WM831X_IM_GP2_EINT_MASK                 0x0002  /* IM_GP2_EINT */
+#define WM831X_IM_GP2_EINT_SHIFT                     1  /* IM_GP2_EINT */
+#define WM831X_IM_GP2_EINT_WIDTH                     1  /* IM_GP2_EINT */
+#define WM831X_IM_GP1_EINT                      0x0001  /* IM_GP1_EINT */
+#define WM831X_IM_GP1_EINT_MASK                 0x0001  /* IM_GP1_EINT */
+#define WM831X_IM_GP1_EINT_SHIFT                     0  /* IM_GP1_EINT */
+#define WM831X_IM_GP1_EINT_WIDTH                     1  /* IM_GP1_EINT */
+
+
+#endif
diff --git a/include/linux/mfd/wm831x/otp.h b/include/linux/mfd/wm831x/otp.h
new file mode 100644
index 00000000..ce1f81a3
--- /dev/null
+++ b/include/linux/mfd/wm831x/otp.h
@@ -0,0 +1,162 @@
+/*
+ * include/linux/mfd/wm831x/otp.h -- OTP interface for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_OTP_H__
+#define __MFD_WM831X_OTP_H__
+
+int wm831x_otp_init(struct wm831x *wm831x);
+void wm831x_otp_exit(struct wm831x *wm831x);
+
+/*
+ * R30720 (0x7800) - Unique ID 1
+ */
+#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30721 (0x7801) - Unique ID 2
+ */
+#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30722 (0x7802) - Unique ID 3
+ */
+#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30723 (0x7803) - Unique ID 4
+ */
+#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30724 (0x7804) - Unique ID 5
+ */
+#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30725 (0x7805) - Unique ID 6
+ */
+#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30726 (0x7806) - Unique ID 7
+ */
+#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30727 (0x7807) - Unique ID 8
+ */
+#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30728 (0x7808) - Factory OTP ID
+ */
+#define WM831X_OTP_FACT_ID_MASK                 0xFFFE  /* OTP_FACT_ID - [15:1] */
+#define WM831X_OTP_FACT_ID_SHIFT                     1  /* OTP_FACT_ID - [15:1] */
+#define WM831X_OTP_FACT_ID_WIDTH                    15  /* OTP_FACT_ID - [15:1] */
+#define WM831X_OTP_FACT_FINAL                   0x0001  /* OTP_FACT_FINAL */
+#define WM831X_OTP_FACT_FINAL_MASK              0x0001  /* OTP_FACT_FINAL */
+#define WM831X_OTP_FACT_FINAL_SHIFT                  0  /* OTP_FACT_FINAL */
+#define WM831X_OTP_FACT_FINAL_WIDTH                  1  /* OTP_FACT_FINAL */
+
+/*
+ * R30729 (0x7809) - Factory OTP 1
+ */
+#define WM831X_DC3_TRIM_MASK                    0xF000  /* DC3_TRIM - [15:12] */
+#define WM831X_DC3_TRIM_SHIFT                       12  /* DC3_TRIM - [15:12] */
+#define WM831X_DC3_TRIM_WIDTH                        4  /* DC3_TRIM - [15:12] */
+#define WM831X_DC2_TRIM_MASK                    0x0FC0  /* DC2_TRIM - [11:6] */
+#define WM831X_DC2_TRIM_SHIFT                        6  /* DC2_TRIM - [11:6] */
+#define WM831X_DC2_TRIM_WIDTH                        6  /* DC2_TRIM - [11:6] */
+#define WM831X_DC1_TRIM_MASK                    0x003F  /* DC1_TRIM - [5:0] */
+#define WM831X_DC1_TRIM_SHIFT                        0  /* DC1_TRIM - [5:0] */
+#define WM831X_DC1_TRIM_WIDTH                        6  /* DC1_TRIM - [5:0] */
+
+/*
+ * R30730 (0x780A) - Factory OTP 2
+ */
+#define WM831X_CHIP_ID_MASK                     0xFFFF  /* CHIP_ID - [15:0] */
+#define WM831X_CHIP_ID_SHIFT                         0  /* CHIP_ID - [15:0] */
+#define WM831X_CHIP_ID_WIDTH                        16  /* CHIP_ID - [15:0] */
+
+/*
+ * R30731 (0x780B) - Factory OTP 3
+ */
+#define WM831X_OSC_TRIM_MASK                    0x0780  /* OSC_TRIM - [10:7] */
+#define WM831X_OSC_TRIM_SHIFT                        7  /* OSC_TRIM - [10:7] */
+#define WM831X_OSC_TRIM_WIDTH                        4  /* OSC_TRIM - [10:7] */
+#define WM831X_BG_TRIM_MASK                     0x0078  /* BG_TRIM - [6:3] */
+#define WM831X_BG_TRIM_SHIFT                         3  /* BG_TRIM - [6:3] */
+#define WM831X_BG_TRIM_WIDTH                         4  /* BG_TRIM - [6:3] */
+#define WM831X_LPBG_TRIM_MASK                   0x0007  /* LPBG_TRIM - [2:0] */
+#define WM831X_LPBG_TRIM_SHIFT                       0  /* LPBG_TRIM - [2:0] */
+#define WM831X_LPBG_TRIM_WIDTH                       3  /* LPBG_TRIM - [2:0] */
+
+/*
+ * R30732 (0x780C) - Factory OTP 4
+ */
+#define WM831X_CHILD_I2C_ADDR_MASK              0x00FE  /* CHILD_I2C_ADDR - [7:1] */
+#define WM831X_CHILD_I2C_ADDR_SHIFT                  1  /* CHILD_I2C_ADDR - [7:1] */
+#define WM831X_CHILD_I2C_ADDR_WIDTH                  7  /* CHILD_I2C_ADDR - [7:1] */
+#define WM831X_CH_AW                            0x0001  /* CH_AW */
+#define WM831X_CH_AW_MASK                       0x0001  /* CH_AW */
+#define WM831X_CH_AW_SHIFT                           0  /* CH_AW */
+#define WM831X_CH_AW_WIDTH                           1  /* CH_AW */
+
+/*
+ * R30733 (0x780D) - Factory OTP 5
+ */
+#define WM831X_CHARGE_TRIM_MASK                 0x003F  /* CHARGE_TRIM - [5:0] */
+#define WM831X_CHARGE_TRIM_SHIFT                     0  /* CHARGE_TRIM - [5:0] */
+#define WM831X_CHARGE_TRIM_WIDTH                     6  /* CHARGE_TRIM - [5:0] */
+
+/*
+ * R30736 (0x7810) - Customer OTP ID
+ */
+#define WM831X_OTP_AUTO_PROG                    0x8000  /* OTP_AUTO_PROG */
+#define WM831X_OTP_AUTO_PROG_MASK               0x8000  /* OTP_AUTO_PROG */
+#define WM831X_OTP_AUTO_PROG_SHIFT                  15  /* OTP_AUTO_PROG */
+#define WM831X_OTP_AUTO_PROG_WIDTH                   1  /* OTP_AUTO_PROG */
+#define WM831X_OTP_CUST_ID_MASK                 0x7FFE  /* OTP_CUST_ID - [14:1] */
+#define WM831X_OTP_CUST_ID_SHIFT                     1  /* OTP_CUST_ID - [14:1] */
+#define WM831X_OTP_CUST_ID_WIDTH                    14  /* OTP_CUST_ID - [14:1] */
+#define WM831X_OTP_CUST_FINAL                   0x0001  /* OTP_CUST_FINAL */
+#define WM831X_OTP_CUST_FINAL_MASK              0x0001  /* OTP_CUST_FINAL */
+#define WM831X_OTP_CUST_FINAL_SHIFT                  0  /* OTP_CUST_FINAL */
+#define WM831X_OTP_CUST_FINAL_WIDTH                  1  /* OTP_CUST_FINAL */
+
+/*
+ * R30759 (0x7827) - DBE CHECK DATA
+ */
+#define WM831X_DBE_VALID_DATA_MASK              0xFFFF  /* DBE_VALID_DATA - [15:0] */
+#define WM831X_DBE_VALID_DATA_SHIFT                  0  /* DBE_VALID_DATA - [15:0] */
+#define WM831X_DBE_VALID_DATA_WIDTH                 16  /* DBE_VALID_DATA - [15:0] */
+
+
+#endif
diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h
new file mode 100644
index 00000000..1d7a3f7b
--- /dev/null
+++ b/include/linux/mfd/wm831x/pdata.h
@@ -0,0 +1,150 @@
+/*
+ * include/linux/mfd/wm831x/pdata.h -- Platform data for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_PDATA_H__
+#define __MFD_WM831X_PDATA_H__
+
+struct wm831x;
+struct regulator_init_data;
+
+struct wm831x_backlight_pdata {
+	int isink;     /** ISINK to use, 1 or 2 */
+	int max_uA;    /** Maximum current to allow */
+};
+
+struct wm831x_backup_pdata {
+	int charger_enable;
+	int no_constant_voltage;  /** Disable constant voltage charging */
+	int vlim;   /** Voltage limit in milivolts */
+	int ilim;   /** Current limit in microamps */
+};
+
+struct wm831x_battery_pdata {
+	int enable;         /** Enable charging */
+	int fast_enable;    /** Enable fast charging */
+	int off_mask;       /** Mask OFF while charging */
+	int trickle_ilim;   /** Trickle charge current limit, in mA */
+	int vsel;           /** Target voltage, in mV */
+	int eoc_iterm;      /** End of trickle charge current, in mA */
+	int fast_ilim;      /** Fast charge current limit, in mA */
+	int timeout;        /** Charge cycle timeout, in minutes */
+};
+
+/**
+ * Configuration for the WM831x DC-DC BuckWise convertors.  This
+ * should be passed as driver_data in the regulator_init_data.
+ *
+ * Currently all the configuration is for the fast DVS switching
+ * support of the devices.  This allows MFPs on the device to be
+ * configured as an input to switch between two output voltages,
+ * allowing voltage transitions without the expense of an access over
+ * I2C or SPI buses.
+ */
+struct wm831x_buckv_pdata {
+	int dvs_gpio;        /** CPU GPIO to use for DVS switching */
+	int dvs_control_src; /** Hardware DVS source to use (1 or 2) */
+	int dvs_init_state;  /** DVS state to expect on startup */
+	int dvs_state_gpio;  /** CPU GPIO to use for monitoring status */
+};
+
+/* Sources for status LED configuration.  Values are register values
+ * plus 1 to allow for a zero default for preserve.
+ */
+enum wm831x_status_src {
+	WM831X_STATUS_PRESERVE = 0,  /* Keep the current hardware setting */
+	WM831X_STATUS_OTP = 1,
+	WM831X_STATUS_POWER = 2,
+	WM831X_STATUS_CHARGER = 3,
+	WM831X_STATUS_MANUAL = 4,
+};
+
+struct wm831x_status_pdata {
+	enum wm831x_status_src default_src;
+	const char *name;
+	const char *default_trigger;
+};
+
+struct wm831x_touch_pdata {
+	int fivewire;          /** 1 for five wire mode, 0 for 4 wire */
+	int isel;              /** Current for pen down (uA) */
+	int rpu;               /** Pen down sensitivity resistor divider */
+	int pressure;          /** Report pressure (boolean) */
+	unsigned int data_irq; /** Touch data ready IRQ */
+	int data_irqf;         /** IRQ flags for data ready IRQ */
+	unsigned int pd_irq;   /** Touch pendown detect IRQ */
+	int pd_irqf;           /** IRQ flags for pen down IRQ */
+};
+
+enum wm831x_watchdog_action {
+	WM831X_WDOG_NONE = 0,
+	WM831X_WDOG_INTERRUPT = 1,
+	WM831X_WDOG_RESET = 2,
+	WM831X_WDOG_WAKE = 3,
+};
+
+struct wm831x_watchdog_pdata {
+	enum wm831x_watchdog_action primary, secondary;
+	int update_gpio;
+	unsigned int software:1;
+};
+
+#define WM831X_MAX_STATUS 2
+#define WM831X_MAX_DCDC   4
+#define WM831X_MAX_EPE    2
+#define WM831X_MAX_LDO    11
+#define WM831X_MAX_ISINK  2
+
+#define WM831X_GPIO_CONFIGURE 0x10000
+#define WM831X_GPIO_NUM 16
+
+struct wm831x_pdata {
+	/** Used to distinguish multiple WM831x chips */
+	int wm831x_num;
+
+	/** Called before subdevices are set up */
+	int (*pre_init)(struct wm831x *wm831x);
+	/** Called after subdevices are set up */
+	int (*post_init)(struct wm831x *wm831x);
+
+	/** Put the /IRQ line into CMOS mode */
+	bool irq_cmos;
+
+	/** Disable the touchscreen */
+	bool disable_touch;
+
+	/** The driver should initiate a power off sequence during shutdown */
+	bool soft_shutdown;
+
+	int irq_base;
+	int gpio_base;
+	int gpio_defaults[WM831X_GPIO_NUM];
+	struct wm831x_backlight_pdata *backlight;
+	struct wm831x_backup_pdata *backup;
+	struct wm831x_battery_pdata *battery;
+	struct wm831x_touch_pdata *touch;
+	struct wm831x_watchdog_pdata *watchdog;
+
+	/** LED1 = 0 and so on */
+	struct wm831x_status_pdata *status[WM831X_MAX_STATUS];
+	/** DCDC1 = 0 and so on */
+	struct regulator_init_data *dcdc[WM831X_MAX_DCDC];
+	/** EPE1 = 0 and so on */
+	struct regulator_init_data *epe[WM831X_MAX_EPE];
+	/** LDO1 = 0 and so on */
+	struct regulator_init_data *ldo[WM831X_MAX_LDO];
+	/** ISINK1 = 0 and so on*/
+	struct regulator_init_data *isink[WM831X_MAX_ISINK];
+};
+
+#endif
diff --git a/include/linux/mfd/wm831x/pmu.h b/include/linux/mfd/wm831x/pmu.h
new file mode 100644
index 00000000..b18cbb02
--- /dev/null
+++ b/include/linux/mfd/wm831x/pmu.h
@@ -0,0 +1,189 @@
+/*
+ * include/linux/mfd/wm831x/pmu.h -- PMU for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_PMU_H__
+#define __MFD_WM831X_PMU_H__
+
+/*
+ * R16387 (0x4003) - Power State
+ */
+#define WM831X_CHIP_ON                          0x8000  /* CHIP_ON */
+#define WM831X_CHIP_ON_MASK                     0x8000  /* CHIP_ON */
+#define WM831X_CHIP_ON_SHIFT                        15  /* CHIP_ON */
+#define WM831X_CHIP_ON_WIDTH                         1  /* CHIP_ON */
+#define WM831X_CHIP_SLP                         0x4000  /* CHIP_SLP */
+#define WM831X_CHIP_SLP_MASK                    0x4000  /* CHIP_SLP */
+#define WM831X_CHIP_SLP_SHIFT                       14  /* CHIP_SLP */
+#define WM831X_CHIP_SLP_WIDTH                        1  /* CHIP_SLP */
+#define WM831X_REF_LP                           0x1000  /* REF_LP */
+#define WM831X_REF_LP_MASK                      0x1000  /* REF_LP */
+#define WM831X_REF_LP_SHIFT                         12  /* REF_LP */
+#define WM831X_REF_LP_WIDTH                          1  /* REF_LP */
+#define WM831X_PWRSTATE_DLY_MASK                0x0C00  /* PWRSTATE_DLY - [11:10] */
+#define WM831X_PWRSTATE_DLY_SHIFT                   10  /* PWRSTATE_DLY - [11:10] */
+#define WM831X_PWRSTATE_DLY_WIDTH                    2  /* PWRSTATE_DLY - [11:10] */
+#define WM831X_SWRST_DLY                        0x0200  /* SWRST_DLY */
+#define WM831X_SWRST_DLY_MASK                   0x0200  /* SWRST_DLY */
+#define WM831X_SWRST_DLY_SHIFT                       9  /* SWRST_DLY */
+#define WM831X_SWRST_DLY_WIDTH                       1  /* SWRST_DLY */
+#define WM831X_USB100MA_STARTUP_MASK            0x0030  /* USB100MA_STARTUP - [5:4] */
+#define WM831X_USB100MA_STARTUP_SHIFT                4  /* USB100MA_STARTUP - [5:4] */
+#define WM831X_USB100MA_STARTUP_WIDTH                2  /* USB100MA_STARTUP - [5:4] */
+#define WM831X_USB_CURR_STS                     0x0008  /* USB_CURR_STS */
+#define WM831X_USB_CURR_STS_MASK                0x0008  /* USB_CURR_STS */
+#define WM831X_USB_CURR_STS_SHIFT                    3  /* USB_CURR_STS */
+#define WM831X_USB_CURR_STS_WIDTH                    1  /* USB_CURR_STS */
+#define WM831X_USB_ILIM_MASK                    0x0007  /* USB_ILIM - [2:0] */
+#define WM831X_USB_ILIM_SHIFT                        0  /* USB_ILIM - [2:0] */
+#define WM831X_USB_ILIM_WIDTH                        3  /* USB_ILIM - [2:0] */
+
+/*
+ * R16397 (0x400D) - System Status
+ */
+#define WM831X_THW_STS                          0x8000  /* THW_STS */
+#define WM831X_THW_STS_MASK                     0x8000  /* THW_STS */
+#define WM831X_THW_STS_SHIFT                        15  /* THW_STS */
+#define WM831X_THW_STS_WIDTH                         1  /* THW_STS */
+#define WM831X_PWR_SRC_BATT                     0x0400  /* PWR_SRC_BATT */
+#define WM831X_PWR_SRC_BATT_MASK                0x0400  /* PWR_SRC_BATT */
+#define WM831X_PWR_SRC_BATT_SHIFT                   10  /* PWR_SRC_BATT */
+#define WM831X_PWR_SRC_BATT_WIDTH                    1  /* PWR_SRC_BATT */
+#define WM831X_PWR_WALL                         0x0200  /* PWR_WALL */
+#define WM831X_PWR_WALL_MASK                    0x0200  /* PWR_WALL */
+#define WM831X_PWR_WALL_SHIFT                        9  /* PWR_WALL */
+#define WM831X_PWR_WALL_WIDTH                        1  /* PWR_WALL */
+#define WM831X_PWR_USB                          0x0100  /* PWR_USB */
+#define WM831X_PWR_USB_MASK                     0x0100  /* PWR_USB */
+#define WM831X_PWR_USB_SHIFT                         8  /* PWR_USB */
+#define WM831X_PWR_USB_WIDTH                         1  /* PWR_USB */
+#define WM831X_MAIN_STATE_MASK                  0x001F  /* MAIN_STATE - [4:0] */
+#define WM831X_MAIN_STATE_SHIFT                      0  /* MAIN_STATE - [4:0] */
+#define WM831X_MAIN_STATE_WIDTH                      5  /* MAIN_STATE - [4:0] */
+
+/*
+ * R16456 (0x4048) - Charger Control 1
+ */
+#define WM831X_CHG_ENA                          0x8000  /* CHG_ENA */
+#define WM831X_CHG_ENA_MASK                     0x8000  /* CHG_ENA */
+#define WM831X_CHG_ENA_SHIFT                        15  /* CHG_ENA */
+#define WM831X_CHG_ENA_WIDTH                         1  /* CHG_ENA */
+#define WM831X_CHG_FRC                          0x4000  /* CHG_FRC */
+#define WM831X_CHG_FRC_MASK                     0x4000  /* CHG_FRC */
+#define WM831X_CHG_FRC_SHIFT                        14  /* CHG_FRC */
+#define WM831X_CHG_FRC_WIDTH                         1  /* CHG_FRC */
+#define WM831X_CHG_ITERM_MASK                   0x1C00  /* CHG_ITERM - [12:10] */
+#define WM831X_CHG_ITERM_SHIFT                      10  /* CHG_ITERM - [12:10] */
+#define WM831X_CHG_ITERM_WIDTH                       3  /* CHG_ITERM - [12:10] */
+#define WM831X_CHG_FAST                         0x0020  /* CHG_FAST */
+#define WM831X_CHG_FAST_MASK                    0x0020  /* CHG_FAST */
+#define WM831X_CHG_FAST_SHIFT                        5  /* CHG_FAST */
+#define WM831X_CHG_FAST_WIDTH                        1  /* CHG_FAST */
+#define WM831X_CHG_IMON_ENA                     0x0002  /* CHG_IMON_ENA */
+#define WM831X_CHG_IMON_ENA_MASK                0x0002  /* CHG_IMON_ENA */
+#define WM831X_CHG_IMON_ENA_SHIFT                    1  /* CHG_IMON_ENA */
+#define WM831X_CHG_IMON_ENA_WIDTH                    1  /* CHG_IMON_ENA */
+#define WM831X_CHG_CHIP_TEMP_MON                0x0001  /* CHG_CHIP_TEMP_MON */
+#define WM831X_CHG_CHIP_TEMP_MON_MASK           0x0001  /* CHG_CHIP_TEMP_MON */
+#define WM831X_CHG_CHIP_TEMP_MON_SHIFT               0  /* CHG_CHIP_TEMP_MON */
+#define WM831X_CHG_CHIP_TEMP_MON_WIDTH               1  /* CHG_CHIP_TEMP_MON */
+
+/*
+ * R16457 (0x4049) - Charger Control 2
+ */
+#define WM831X_CHG_OFF_MSK                      0x4000  /* CHG_OFF_MSK */
+#define WM831X_CHG_OFF_MSK_MASK                 0x4000  /* CHG_OFF_MSK */
+#define WM831X_CHG_OFF_MSK_SHIFT                    14  /* CHG_OFF_MSK */
+#define WM831X_CHG_OFF_MSK_WIDTH                     1  /* CHG_OFF_MSK */
+#define WM831X_CHG_TIME_MASK                    0x0F00  /* CHG_TIME - [11:8] */
+#define WM831X_CHG_TIME_SHIFT                        8  /* CHG_TIME - [11:8] */
+#define WM831X_CHG_TIME_WIDTH                        4  /* CHG_TIME - [11:8] */
+#define WM831X_CHG_TRKL_ILIM_MASK               0x00C0  /* CHG_TRKL_ILIM - [7:6] */
+#define WM831X_CHG_TRKL_ILIM_SHIFT                   6  /* CHG_TRKL_ILIM - [7:6] */
+#define WM831X_CHG_TRKL_ILIM_WIDTH                   2  /* CHG_TRKL_ILIM - [7:6] */
+#define WM831X_CHG_VSEL_MASK                    0x0030  /* CHG_VSEL - [5:4] */
+#define WM831X_CHG_VSEL_SHIFT                        4  /* CHG_VSEL - [5:4] */
+#define WM831X_CHG_VSEL_WIDTH                        2  /* CHG_VSEL - [5:4] */
+#define WM831X_CHG_FAST_ILIM_MASK               0x000F  /* CHG_FAST_ILIM - [3:0] */
+#define WM831X_CHG_FAST_ILIM_SHIFT                   0  /* CHG_FAST_ILIM - [3:0] */
+#define WM831X_CHG_FAST_ILIM_WIDTH                   4  /* CHG_FAST_ILIM - [3:0] */
+
+/*
+ * R16458 (0x404A) - Charger Status
+ */
+#define WM831X_BATT_OV_STS                      0x8000  /* BATT_OV_STS */
+#define WM831X_BATT_OV_STS_MASK                 0x8000  /* BATT_OV_STS */
+#define WM831X_BATT_OV_STS_SHIFT                    15  /* BATT_OV_STS */
+#define WM831X_BATT_OV_STS_WIDTH                     1  /* BATT_OV_STS */
+#define WM831X_CHG_STATE_MASK                   0x7000  /* CHG_STATE - [14:12] */
+#define WM831X_CHG_STATE_SHIFT                      12  /* CHG_STATE - [14:12] */
+#define WM831X_CHG_STATE_WIDTH                       3  /* CHG_STATE - [14:12] */
+#define WM831X_BATT_HOT_STS                     0x0800  /* BATT_HOT_STS */
+#define WM831X_BATT_HOT_STS_MASK                0x0800  /* BATT_HOT_STS */
+#define WM831X_BATT_HOT_STS_SHIFT                   11  /* BATT_HOT_STS */
+#define WM831X_BATT_HOT_STS_WIDTH                    1  /* BATT_HOT_STS */
+#define WM831X_BATT_COLD_STS                    0x0400  /* BATT_COLD_STS */
+#define WM831X_BATT_COLD_STS_MASK               0x0400  /* BATT_COLD_STS */
+#define WM831X_BATT_COLD_STS_SHIFT                  10  /* BATT_COLD_STS */
+#define WM831X_BATT_COLD_STS_WIDTH                   1  /* BATT_COLD_STS */
+#define WM831X_CHG_TOPOFF                       0x0200  /* CHG_TOPOFF */
+#define WM831X_CHG_TOPOFF_MASK                  0x0200  /* CHG_TOPOFF */
+#define WM831X_CHG_TOPOFF_SHIFT                      9  /* CHG_TOPOFF */
+#define WM831X_CHG_TOPOFF_WIDTH                      1  /* CHG_TOPOFF */
+#define WM831X_CHG_ACTIVE                       0x0100  /* CHG_ACTIVE */
+#define WM831X_CHG_ACTIVE_MASK                  0x0100  /* CHG_ACTIVE */
+#define WM831X_CHG_ACTIVE_SHIFT                      8  /* CHG_ACTIVE */
+#define WM831X_CHG_ACTIVE_WIDTH                      1  /* CHG_ACTIVE */
+#define WM831X_CHG_TIME_ELAPSED_MASK            0x00FF  /* CHG_TIME_ELAPSED - [7:0] */
+#define WM831X_CHG_TIME_ELAPSED_SHIFT                0  /* CHG_TIME_ELAPSED - [7:0] */
+#define WM831X_CHG_TIME_ELAPSED_WIDTH                8  /* CHG_TIME_ELAPSED - [7:0] */
+
+#define WM831X_CHG_STATE_OFF         (0 << WM831X_CHG_STATE_SHIFT)
+#define WM831X_CHG_STATE_TRICKLE     (1 << WM831X_CHG_STATE_SHIFT)
+#define WM831X_CHG_STATE_FAST        (2 << WM831X_CHG_STATE_SHIFT)
+#define WM831X_CHG_STATE_TRICKLE_OT  (3 << WM831X_CHG_STATE_SHIFT)
+#define WM831X_CHG_STATE_FAST_OT     (4 << WM831X_CHG_STATE_SHIFT)
+#define WM831X_CHG_STATE_DEFECTIVE   (5 << WM831X_CHG_STATE_SHIFT)
+
+/*
+ * R16459 (0x404B) - Backup Charger Control
+ */
+#define WM831X_BKUP_CHG_ENA                     0x8000  /* BKUP_CHG_ENA */
+#define WM831X_BKUP_CHG_ENA_MASK                0x8000  /* BKUP_CHG_ENA */
+#define WM831X_BKUP_CHG_ENA_SHIFT                   15  /* BKUP_CHG_ENA */
+#define WM831X_BKUP_CHG_ENA_WIDTH                    1  /* BKUP_CHG_ENA */
+#define WM831X_BKUP_CHG_STS                     0x4000  /* BKUP_CHG_STS */
+#define WM831X_BKUP_CHG_STS_MASK                0x4000  /* BKUP_CHG_STS */
+#define WM831X_BKUP_CHG_STS_SHIFT                   14  /* BKUP_CHG_STS */
+#define WM831X_BKUP_CHG_STS_WIDTH                    1  /* BKUP_CHG_STS */
+#define WM831X_BKUP_CHG_MODE                    0x1000  /* BKUP_CHG_MODE */
+#define WM831X_BKUP_CHG_MODE_MASK               0x1000  /* BKUP_CHG_MODE */
+#define WM831X_BKUP_CHG_MODE_SHIFT                  12  /* BKUP_CHG_MODE */
+#define WM831X_BKUP_CHG_MODE_WIDTH                   1  /* BKUP_CHG_MODE */
+#define WM831X_BKUP_BATT_DET_ENA                0x0800  /* BKUP_BATT_DET_ENA */
+#define WM831X_BKUP_BATT_DET_ENA_MASK           0x0800  /* BKUP_BATT_DET_ENA */
+#define WM831X_BKUP_BATT_DET_ENA_SHIFT              11  /* BKUP_BATT_DET_ENA */
+#define WM831X_BKUP_BATT_DET_ENA_WIDTH               1  /* BKUP_BATT_DET_ENA */
+#define WM831X_BKUP_BATT_STS                    0x0400  /* BKUP_BATT_STS */
+#define WM831X_BKUP_BATT_STS_MASK               0x0400  /* BKUP_BATT_STS */
+#define WM831X_BKUP_BATT_STS_SHIFT                  10  /* BKUP_BATT_STS */
+#define WM831X_BKUP_BATT_STS_WIDTH                   1  /* BKUP_BATT_STS */
+#define WM831X_BKUP_CHG_VLIM                    0x0010  /* BKUP_CHG_VLIM */
+#define WM831X_BKUP_CHG_VLIM_MASK               0x0010  /* BKUP_CHG_VLIM */
+#define WM831X_BKUP_CHG_VLIM_SHIFT                   4  /* BKUP_CHG_VLIM */
+#define WM831X_BKUP_CHG_VLIM_WIDTH                   1  /* BKUP_CHG_VLIM */
+#define WM831X_BKUP_CHG_ILIM_MASK               0x0003  /* BKUP_CHG_ILIM - [1:0] */
+#define WM831X_BKUP_CHG_ILIM_SHIFT                   0  /* BKUP_CHG_ILIM - [1:0] */
+#define WM831X_BKUP_CHG_ILIM_WIDTH                   2  /* BKUP_CHG_ILIM - [1:0] */
+
+#endif
diff --git a/include/linux/mfd/wm831x/regulator.h b/include/linux/mfd/wm831x/regulator.h
new file mode 100644
index 00000000..955d30fc
--- /dev/null
+++ b/include/linux/mfd/wm831x/regulator.h
@@ -0,0 +1,1218 @@
+/*
+ * linux/mfd/wm831x/regulator.h -- Regulator definitons for wm831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_REGULATOR_H__
+#define __MFD_WM831X_REGULATOR_H__
+
+/*
+ * R16462 (0x404E) - Current Sink 1
+ */
+#define WM831X_CS1_ENA                          0x8000  /* CS1_ENA */
+#define WM831X_CS1_ENA_MASK                     0x8000  /* CS1_ENA */
+#define WM831X_CS1_ENA_SHIFT                        15  /* CS1_ENA */
+#define WM831X_CS1_ENA_WIDTH                         1  /* CS1_ENA */
+#define WM831X_CS1_DRIVE                        0x4000  /* CS1_DRIVE */
+#define WM831X_CS1_DRIVE_MASK                   0x4000  /* CS1_DRIVE */
+#define WM831X_CS1_DRIVE_SHIFT                      14  /* CS1_DRIVE */
+#define WM831X_CS1_DRIVE_WIDTH                       1  /* CS1_DRIVE */
+#define WM831X_CS1_SLPENA                       0x1000  /* CS1_SLPENA */
+#define WM831X_CS1_SLPENA_MASK                  0x1000  /* CS1_SLPENA */
+#define WM831X_CS1_SLPENA_SHIFT                     12  /* CS1_SLPENA */
+#define WM831X_CS1_SLPENA_WIDTH                      1  /* CS1_SLPENA */
+#define WM831X_CS1_OFF_RAMP_MASK                0x0C00  /* CS1_OFF_RAMP - [11:10] */
+#define WM831X_CS1_OFF_RAMP_SHIFT                   10  /* CS1_OFF_RAMP - [11:10] */
+#define WM831X_CS1_OFF_RAMP_WIDTH                    2  /* CS1_OFF_RAMP - [11:10] */
+#define WM831X_CS1_ON_RAMP_MASK                 0x0300  /* CS1_ON_RAMP - [9:8] */
+#define WM831X_CS1_ON_RAMP_SHIFT                     8  /* CS1_ON_RAMP - [9:8] */
+#define WM831X_CS1_ON_RAMP_WIDTH                     2  /* CS1_ON_RAMP - [9:8] */
+#define WM831X_CS1_ISEL_MASK                    0x003F  /* CS1_ISEL - [5:0] */
+#define WM831X_CS1_ISEL_SHIFT                        0  /* CS1_ISEL - [5:0] */
+#define WM831X_CS1_ISEL_WIDTH                        6  /* CS1_ISEL - [5:0] */
+
+/*
+ * R16463 (0x404F) - Current Sink 2
+ */
+#define WM831X_CS2_ENA                          0x8000  /* CS2_ENA */
+#define WM831X_CS2_ENA_MASK                     0x8000  /* CS2_ENA */
+#define WM831X_CS2_ENA_SHIFT                        15  /* CS2_ENA */
+#define WM831X_CS2_ENA_WIDTH                         1  /* CS2_ENA */
+#define WM831X_CS2_DRIVE                        0x4000  /* CS2_DRIVE */
+#define WM831X_CS2_DRIVE_MASK                   0x4000  /* CS2_DRIVE */
+#define WM831X_CS2_DRIVE_SHIFT                      14  /* CS2_DRIVE */
+#define WM831X_CS2_DRIVE_WIDTH                       1  /* CS2_DRIVE */
+#define WM831X_CS2_SLPENA                       0x1000  /* CS2_SLPENA */
+#define WM831X_CS2_SLPENA_MASK                  0x1000  /* CS2_SLPENA */
+#define WM831X_CS2_SLPENA_SHIFT                     12  /* CS2_SLPENA */
+#define WM831X_CS2_SLPENA_WIDTH                      1  /* CS2_SLPENA */
+#define WM831X_CS2_OFF_RAMP_MASK                0x0C00  /* CS2_OFF_RAMP - [11:10] */
+#define WM831X_CS2_OFF_RAMP_SHIFT                   10  /* CS2_OFF_RAMP - [11:10] */
+#define WM831X_CS2_OFF_RAMP_WIDTH                    2  /* CS2_OFF_RAMP - [11:10] */
+#define WM831X_CS2_ON_RAMP_MASK                 0x0300  /* CS2_ON_RAMP - [9:8] */
+#define WM831X_CS2_ON_RAMP_SHIFT                     8  /* CS2_ON_RAMP - [9:8] */
+#define WM831X_CS2_ON_RAMP_WIDTH                     2  /* CS2_ON_RAMP - [9:8] */
+#define WM831X_CS2_ISEL_MASK                    0x003F  /* CS2_ISEL - [5:0] */
+#define WM831X_CS2_ISEL_SHIFT                        0  /* CS2_ISEL - [5:0] */
+#define WM831X_CS2_ISEL_WIDTH                        6  /* CS2_ISEL - [5:0] */
+
+/*
+ * R16464 (0x4050) - DCDC Enable
+ */
+#define WM831X_EPE2_ENA                         0x0080  /* EPE2_ENA */
+#define WM831X_EPE2_ENA_MASK                    0x0080  /* EPE2_ENA */
+#define WM831X_EPE2_ENA_SHIFT                        7  /* EPE2_ENA */
+#define WM831X_EPE2_ENA_WIDTH                        1  /* EPE2_ENA */
+#define WM831X_EPE1_ENA                         0x0040  /* EPE1_ENA */
+#define WM831X_EPE1_ENA_MASK                    0x0040  /* EPE1_ENA */
+#define WM831X_EPE1_ENA_SHIFT                        6  /* EPE1_ENA */
+#define WM831X_EPE1_ENA_WIDTH                        1  /* EPE1_ENA */
+#define WM831X_DC4_ENA                          0x0008  /* DC4_ENA */
+#define WM831X_DC4_ENA_MASK                     0x0008  /* DC4_ENA */
+#define WM831X_DC4_ENA_SHIFT                         3  /* DC4_ENA */
+#define WM831X_DC4_ENA_WIDTH                         1  /* DC4_ENA */
+#define WM831X_DC3_ENA                          0x0004  /* DC3_ENA */
+#define WM831X_DC3_ENA_MASK                     0x0004  /* DC3_ENA */
+#define WM831X_DC3_ENA_SHIFT                         2  /* DC3_ENA */
+#define WM831X_DC3_ENA_WIDTH                         1  /* DC3_ENA */
+#define WM831X_DC2_ENA                          0x0002  /* DC2_ENA */
+#define WM831X_DC2_ENA_MASK                     0x0002  /* DC2_ENA */
+#define WM831X_DC2_ENA_SHIFT                         1  /* DC2_ENA */
+#define WM831X_DC2_ENA_WIDTH                         1  /* DC2_ENA */
+#define WM831X_DC1_ENA                          0x0001  /* DC1_ENA */
+#define WM831X_DC1_ENA_MASK                     0x0001  /* DC1_ENA */
+#define WM831X_DC1_ENA_SHIFT                         0  /* DC1_ENA */
+#define WM831X_DC1_ENA_WIDTH                         1  /* DC1_ENA */
+
+/*
+ * R16465 (0x4051) - LDO Enable
+ */
+#define WM831X_LDO11_ENA                        0x0400  /* LDO11_ENA */
+#define WM831X_LDO11_ENA_MASK                   0x0400  /* LDO11_ENA */
+#define WM831X_LDO11_ENA_SHIFT                      10  /* LDO11_ENA */
+#define WM831X_LDO11_ENA_WIDTH                       1  /* LDO11_ENA */
+#define WM831X_LDO10_ENA                        0x0200  /* LDO10_ENA */
+#define WM831X_LDO10_ENA_MASK                   0x0200  /* LDO10_ENA */
+#define WM831X_LDO10_ENA_SHIFT                       9  /* LDO10_ENA */
+#define WM831X_LDO10_ENA_WIDTH                       1  /* LDO10_ENA */
+#define WM831X_LDO9_ENA                         0x0100  /* LDO9_ENA */
+#define WM831X_LDO9_ENA_MASK                    0x0100  /* LDO9_ENA */
+#define WM831X_LDO9_ENA_SHIFT                        8  /* LDO9_ENA */
+#define WM831X_LDO9_ENA_WIDTH                        1  /* LDO9_ENA */
+#define WM831X_LDO8_ENA                         0x0080  /* LDO8_ENA */
+#define WM831X_LDO8_ENA_MASK                    0x0080  /* LDO8_ENA */
+#define WM831X_LDO8_ENA_SHIFT                        7  /* LDO8_ENA */
+#define WM831X_LDO8_ENA_WIDTH                        1  /* LDO8_ENA */
+#define WM831X_LDO7_ENA                         0x0040  /* LDO7_ENA */
+#define WM831X_LDO7_ENA_MASK                    0x0040  /* LDO7_ENA */
+#define WM831X_LDO7_ENA_SHIFT                        6  /* LDO7_ENA */
+#define WM831X_LDO7_ENA_WIDTH                        1  /* LDO7_ENA */
+#define WM831X_LDO6_ENA                         0x0020  /* LDO6_ENA */
+#define WM831X_LDO6_ENA_MASK                    0x0020  /* LDO6_ENA */
+#define WM831X_LDO6_ENA_SHIFT                        5  /* LDO6_ENA */
+#define WM831X_LDO6_ENA_WIDTH                        1  /* LDO6_ENA */
+#define WM831X_LDO5_ENA                         0x0010  /* LDO5_ENA */
+#define WM831X_LDO5_ENA_MASK                    0x0010  /* LDO5_ENA */
+#define WM831X_LDO5_ENA_SHIFT                        4  /* LDO5_ENA */
+#define WM831X_LDO5_ENA_WIDTH                        1  /* LDO5_ENA */
+#define WM831X_LDO4_ENA                         0x0008  /* LDO4_ENA */
+#define WM831X_LDO4_ENA_MASK                    0x0008  /* LDO4_ENA */
+#define WM831X_LDO4_ENA_SHIFT                        3  /* LDO4_ENA */
+#define WM831X_LDO4_ENA_WIDTH                        1  /* LDO4_ENA */
+#define WM831X_LDO3_ENA                         0x0004  /* LDO3_ENA */
+#define WM831X_LDO3_ENA_MASK                    0x0004  /* LDO3_ENA */
+#define WM831X_LDO3_ENA_SHIFT                        2  /* LDO3_ENA */
+#define WM831X_LDO3_ENA_WIDTH                        1  /* LDO3_ENA */
+#define WM831X_LDO2_ENA                         0x0002  /* LDO2_ENA */
+#define WM831X_LDO2_ENA_MASK                    0x0002  /* LDO2_ENA */
+#define WM831X_LDO2_ENA_SHIFT                        1  /* LDO2_ENA */
+#define WM831X_LDO2_ENA_WIDTH                        1  /* LDO2_ENA */
+#define WM831X_LDO1_ENA                         0x0001  /* LDO1_ENA */
+#define WM831X_LDO1_ENA_MASK                    0x0001  /* LDO1_ENA */
+#define WM831X_LDO1_ENA_SHIFT                        0  /* LDO1_ENA */
+#define WM831X_LDO1_ENA_WIDTH                        1  /* LDO1_ENA */
+
+/*
+ * R16466 (0x4052) - DCDC Status
+ */
+#define WM831X_EPE2_STS                         0x0080  /* EPE2_STS */
+#define WM831X_EPE2_STS_MASK                    0x0080  /* EPE2_STS */
+#define WM831X_EPE2_STS_SHIFT                        7  /* EPE2_STS */
+#define WM831X_EPE2_STS_WIDTH                        1  /* EPE2_STS */
+#define WM831X_EPE1_STS                         0x0040  /* EPE1_STS */
+#define WM831X_EPE1_STS_MASK                    0x0040  /* EPE1_STS */
+#define WM831X_EPE1_STS_SHIFT                        6  /* EPE1_STS */
+#define WM831X_EPE1_STS_WIDTH                        1  /* EPE1_STS */
+#define WM831X_DC4_STS                          0x0008  /* DC4_STS */
+#define WM831X_DC4_STS_MASK                     0x0008  /* DC4_STS */
+#define WM831X_DC4_STS_SHIFT                         3  /* DC4_STS */
+#define WM831X_DC4_STS_WIDTH                         1  /* DC4_STS */
+#define WM831X_DC3_STS                          0x0004  /* DC3_STS */
+#define WM831X_DC3_STS_MASK                     0x0004  /* DC3_STS */
+#define WM831X_DC3_STS_SHIFT                         2  /* DC3_STS */
+#define WM831X_DC3_STS_WIDTH                         1  /* DC3_STS */
+#define WM831X_DC2_STS                          0x0002  /* DC2_STS */
+#define WM831X_DC2_STS_MASK                     0x0002  /* DC2_STS */
+#define WM831X_DC2_STS_SHIFT                         1  /* DC2_STS */
+#define WM831X_DC2_STS_WIDTH                         1  /* DC2_STS */
+#define WM831X_DC1_STS                          0x0001  /* DC1_STS */
+#define WM831X_DC1_STS_MASK                     0x0001  /* DC1_STS */
+#define WM831X_DC1_STS_SHIFT                         0  /* DC1_STS */
+#define WM831X_DC1_STS_WIDTH                         1  /* DC1_STS */
+
+/*
+ * R16467 (0x4053) - LDO Status
+ */
+#define WM831X_LDO11_STS                        0x0400  /* LDO11_STS */
+#define WM831X_LDO11_STS_MASK                   0x0400  /* LDO11_STS */
+#define WM831X_LDO11_STS_SHIFT                      10  /* LDO11_STS */
+#define WM831X_LDO11_STS_WIDTH                       1  /* LDO11_STS */
+#define WM831X_LDO10_STS                        0x0200  /* LDO10_STS */
+#define WM831X_LDO10_STS_MASK                   0x0200  /* LDO10_STS */
+#define WM831X_LDO10_STS_SHIFT                       9  /* LDO10_STS */
+#define WM831X_LDO10_STS_WIDTH                       1  /* LDO10_STS */
+#define WM831X_LDO9_STS                         0x0100  /* LDO9_STS */
+#define WM831X_LDO9_STS_MASK                    0x0100  /* LDO9_STS */
+#define WM831X_LDO9_STS_SHIFT                        8  /* LDO9_STS */
+#define WM831X_LDO9_STS_WIDTH                        1  /* LDO9_STS */
+#define WM831X_LDO8_STS                         0x0080  /* LDO8_STS */
+#define WM831X_LDO8_STS_MASK                    0x0080  /* LDO8_STS */
+#define WM831X_LDO8_STS_SHIFT                        7  /* LDO8_STS */
+#define WM831X_LDO8_STS_WIDTH                        1  /* LDO8_STS */
+#define WM831X_LDO7_STS                         0x0040  /* LDO7_STS */
+#define WM831X_LDO7_STS_MASK                    0x0040  /* LDO7_STS */
+#define WM831X_LDO7_STS_SHIFT                        6  /* LDO7_STS */
+#define WM831X_LDO7_STS_WIDTH                        1  /* LDO7_STS */
+#define WM831X_LDO6_STS                         0x0020  /* LDO6_STS */
+#define WM831X_LDO6_STS_MASK                    0x0020  /* LDO6_STS */
+#define WM831X_LDO6_STS_SHIFT                        5  /* LDO6_STS */
+#define WM831X_LDO6_STS_WIDTH                        1  /* LDO6_STS */
+#define WM831X_LDO5_STS                         0x0010  /* LDO5_STS */
+#define WM831X_LDO5_STS_MASK                    0x0010  /* LDO5_STS */
+#define WM831X_LDO5_STS_SHIFT                        4  /* LDO5_STS */
+#define WM831X_LDO5_STS_WIDTH                        1  /* LDO5_STS */
+#define WM831X_LDO4_STS                         0x0008  /* LDO4_STS */
+#define WM831X_LDO4_STS_MASK                    0x0008  /* LDO4_STS */
+#define WM831X_LDO4_STS_SHIFT                        3  /* LDO4_STS */
+#define WM831X_LDO4_STS_WIDTH                        1  /* LDO4_STS */
+#define WM831X_LDO3_STS                         0x0004  /* LDO3_STS */
+#define WM831X_LDO3_STS_MASK                    0x0004  /* LDO3_STS */
+#define WM831X_LDO3_STS_SHIFT                        2  /* LDO3_STS */
+#define WM831X_LDO3_STS_WIDTH                        1  /* LDO3_STS */
+#define WM831X_LDO2_STS                         0x0002  /* LDO2_STS */
+#define WM831X_LDO2_STS_MASK                    0x0002  /* LDO2_STS */
+#define WM831X_LDO2_STS_SHIFT                        1  /* LDO2_STS */
+#define WM831X_LDO2_STS_WIDTH                        1  /* LDO2_STS */
+#define WM831X_LDO1_STS                         0x0001  /* LDO1_STS */
+#define WM831X_LDO1_STS_MASK                    0x0001  /* LDO1_STS */
+#define WM831X_LDO1_STS_SHIFT                        0  /* LDO1_STS */
+#define WM831X_LDO1_STS_WIDTH                        1  /* LDO1_STS */
+
+/*
+ * R16468 (0x4054) - DCDC UV Status
+ */
+#define WM831X_DC2_OV_STS                       0x2000  /* DC2_OV_STS */
+#define WM831X_DC2_OV_STS_MASK                  0x2000  /* DC2_OV_STS */
+#define WM831X_DC2_OV_STS_SHIFT                     13  /* DC2_OV_STS */
+#define WM831X_DC2_OV_STS_WIDTH                      1  /* DC2_OV_STS */
+#define WM831X_DC1_OV_STS                       0x1000  /* DC1_OV_STS */
+#define WM831X_DC1_OV_STS_MASK                  0x1000  /* DC1_OV_STS */
+#define WM831X_DC1_OV_STS_SHIFT                     12  /* DC1_OV_STS */
+#define WM831X_DC1_OV_STS_WIDTH                      1  /* DC1_OV_STS */
+#define WM831X_DC2_HC_STS                       0x0200  /* DC2_HC_STS */
+#define WM831X_DC2_HC_STS_MASK                  0x0200  /* DC2_HC_STS */
+#define WM831X_DC2_HC_STS_SHIFT                      9  /* DC2_HC_STS */
+#define WM831X_DC2_HC_STS_WIDTH                      1  /* DC2_HC_STS */
+#define WM831X_DC1_HC_STS                       0x0100  /* DC1_HC_STS */
+#define WM831X_DC1_HC_STS_MASK                  0x0100  /* DC1_HC_STS */
+#define WM831X_DC1_HC_STS_SHIFT                      8  /* DC1_HC_STS */
+#define WM831X_DC1_HC_STS_WIDTH                      1  /* DC1_HC_STS */
+#define WM831X_DC4_UV_STS                       0x0008  /* DC4_UV_STS */
+#define WM831X_DC4_UV_STS_MASK                  0x0008  /* DC4_UV_STS */
+#define WM831X_DC4_UV_STS_SHIFT                      3  /* DC4_UV_STS */
+#define WM831X_DC4_UV_STS_WIDTH                      1  /* DC4_UV_STS */
+#define WM831X_DC3_UV_STS                       0x0004  /* DC3_UV_STS */
+#define WM831X_DC3_UV_STS_MASK                  0x0004  /* DC3_UV_STS */
+#define WM831X_DC3_UV_STS_SHIFT                      2  /* DC3_UV_STS */
+#define WM831X_DC3_UV_STS_WIDTH                      1  /* DC3_UV_STS */
+#define WM831X_DC2_UV_STS                       0x0002  /* DC2_UV_STS */
+#define WM831X_DC2_UV_STS_MASK                  0x0002  /* DC2_UV_STS */
+#define WM831X_DC2_UV_STS_SHIFT                      1  /* DC2_UV_STS */
+#define WM831X_DC2_UV_STS_WIDTH                      1  /* DC2_UV_STS */
+#define WM831X_DC1_UV_STS                       0x0001  /* DC1_UV_STS */
+#define WM831X_DC1_UV_STS_MASK                  0x0001  /* DC1_UV_STS */
+#define WM831X_DC1_UV_STS_SHIFT                      0  /* DC1_UV_STS */
+#define WM831X_DC1_UV_STS_WIDTH                      1  /* DC1_UV_STS */
+
+/*
+ * R16469 (0x4055) - LDO UV Status
+ */
+#define WM831X_INTLDO_UV_STS                    0x8000  /* INTLDO_UV_STS */
+#define WM831X_INTLDO_UV_STS_MASK               0x8000  /* INTLDO_UV_STS */
+#define WM831X_INTLDO_UV_STS_SHIFT                  15  /* INTLDO_UV_STS */
+#define WM831X_INTLDO_UV_STS_WIDTH                   1  /* INTLDO_UV_STS */
+#define WM831X_LDO10_UV_STS                     0x0200  /* LDO10_UV_STS */
+#define WM831X_LDO10_UV_STS_MASK                0x0200  /* LDO10_UV_STS */
+#define WM831X_LDO10_UV_STS_SHIFT                    9  /* LDO10_UV_STS */
+#define WM831X_LDO10_UV_STS_WIDTH                    1  /* LDO10_UV_STS */
+#define WM831X_LDO9_UV_STS                      0x0100  /* LDO9_UV_STS */
+#define WM831X_LDO9_UV_STS_MASK                 0x0100  /* LDO9_UV_STS */
+#define WM831X_LDO9_UV_STS_SHIFT                     8  /* LDO9_UV_STS */
+#define WM831X_LDO9_UV_STS_WIDTH                     1  /* LDO9_UV_STS */
+#define WM831X_LDO8_UV_STS                      0x0080  /* LDO8_UV_STS */
+#define WM831X_LDO8_UV_STS_MASK                 0x0080  /* LDO8_UV_STS */
+#define WM831X_LDO8_UV_STS_SHIFT                     7  /* LDO8_UV_STS */
+#define WM831X_LDO8_UV_STS_WIDTH                     1  /* LDO8_UV_STS */
+#define WM831X_LDO7_UV_STS                      0x0040  /* LDO7_UV_STS */
+#define WM831X_LDO7_UV_STS_MASK                 0x0040  /* LDO7_UV_STS */
+#define WM831X_LDO7_UV_STS_SHIFT                     6  /* LDO7_UV_STS */
+#define WM831X_LDO7_UV_STS_WIDTH                     1  /* LDO7_UV_STS */
+#define WM831X_LDO6_UV_STS                      0x0020  /* LDO6_UV_STS */
+#define WM831X_LDO6_UV_STS_MASK                 0x0020  /* LDO6_UV_STS */
+#define WM831X_LDO6_UV_STS_SHIFT                     5  /* LDO6_UV_STS */
+#define WM831X_LDO6_UV_STS_WIDTH                     1  /* LDO6_UV_STS */
+#define WM831X_LDO5_UV_STS                      0x0010  /* LDO5_UV_STS */
+#define WM831X_LDO5_UV_STS_MASK                 0x0010  /* LDO5_UV_STS */
+#define WM831X_LDO5_UV_STS_SHIFT                     4  /* LDO5_UV_STS */
+#define WM831X_LDO5_UV_STS_WIDTH                     1  /* LDO5_UV_STS */
+#define WM831X_LDO4_UV_STS                      0x0008  /* LDO4_UV_STS */
+#define WM831X_LDO4_UV_STS_MASK                 0x0008  /* LDO4_UV_STS */
+#define WM831X_LDO4_UV_STS_SHIFT                     3  /* LDO4_UV_STS */
+#define WM831X_LDO4_UV_STS_WIDTH                     1  /* LDO4_UV_STS */
+#define WM831X_LDO3_UV_STS                      0x0004  /* LDO3_UV_STS */
+#define WM831X_LDO3_UV_STS_MASK                 0x0004  /* LDO3_UV_STS */
+#define WM831X_LDO3_UV_STS_SHIFT                     2  /* LDO3_UV_STS */
+#define WM831X_LDO3_UV_STS_WIDTH                     1  /* LDO3_UV_STS */
+#define WM831X_LDO2_UV_STS                      0x0002  /* LDO2_UV_STS */
+#define WM831X_LDO2_UV_STS_MASK                 0x0002  /* LDO2_UV_STS */
+#define WM831X_LDO2_UV_STS_SHIFT                     1  /* LDO2_UV_STS */
+#define WM831X_LDO2_UV_STS_WIDTH                     1  /* LDO2_UV_STS */
+#define WM831X_LDO1_UV_STS                      0x0001  /* LDO1_UV_STS */
+#define WM831X_LDO1_UV_STS_MASK                 0x0001  /* LDO1_UV_STS */
+#define WM831X_LDO1_UV_STS_SHIFT                     0  /* LDO1_UV_STS */
+#define WM831X_LDO1_UV_STS_WIDTH                     1  /* LDO1_UV_STS */
+
+/*
+ * R16470 (0x4056) - DC1 Control 1
+ */
+#define WM831X_DC1_RATE_MASK                    0xC000  /* DC1_RATE - [15:14] */
+#define WM831X_DC1_RATE_SHIFT                       14  /* DC1_RATE - [15:14] */
+#define WM831X_DC1_RATE_WIDTH                        2  /* DC1_RATE - [15:14] */
+#define WM831X_DC1_PHASE                        0x1000  /* DC1_PHASE */
+#define WM831X_DC1_PHASE_MASK                   0x1000  /* DC1_PHASE */
+#define WM831X_DC1_PHASE_SHIFT                      12  /* DC1_PHASE */
+#define WM831X_DC1_PHASE_WIDTH                       1  /* DC1_PHASE */
+#define WM831X_DC1_FREQ_MASK                    0x0300  /* DC1_FREQ - [9:8] */
+#define WM831X_DC1_FREQ_SHIFT                        8  /* DC1_FREQ - [9:8] */
+#define WM831X_DC1_FREQ_WIDTH                        2  /* DC1_FREQ - [9:8] */
+#define WM831X_DC1_FLT                          0x0080  /* DC1_FLT */
+#define WM831X_DC1_FLT_MASK                     0x0080  /* DC1_FLT */
+#define WM831X_DC1_FLT_SHIFT                         7  /* DC1_FLT */
+#define WM831X_DC1_FLT_WIDTH                         1  /* DC1_FLT */
+#define WM831X_DC1_SOFT_START_MASK              0x0030  /* DC1_SOFT_START - [5:4] */
+#define WM831X_DC1_SOFT_START_SHIFT                  4  /* DC1_SOFT_START - [5:4] */
+#define WM831X_DC1_SOFT_START_WIDTH                  2  /* DC1_SOFT_START - [5:4] */
+#define WM831X_DC1_CAP_MASK                     0x0003  /* DC1_CAP - [1:0] */
+#define WM831X_DC1_CAP_SHIFT                         0  /* DC1_CAP - [1:0] */
+#define WM831X_DC1_CAP_WIDTH                         2  /* DC1_CAP - [1:0] */
+
+/*
+ * R16471 (0x4057) - DC1 Control 2
+ */
+#define WM831X_DC1_ERR_ACT_MASK                 0xC000  /* DC1_ERR_ACT - [15:14] */
+#define WM831X_DC1_ERR_ACT_SHIFT                    14  /* DC1_ERR_ACT - [15:14] */
+#define WM831X_DC1_ERR_ACT_WIDTH                     2  /* DC1_ERR_ACT - [15:14] */
+#define WM831X_DC1_HWC_SRC_MASK                 0x1800  /* DC1_HWC_SRC - [12:11] */
+#define WM831X_DC1_HWC_SRC_SHIFT                    11  /* DC1_HWC_SRC - [12:11] */
+#define WM831X_DC1_HWC_SRC_WIDTH                     2  /* DC1_HWC_SRC - [12:11] */
+#define WM831X_DC1_HWC_VSEL                     0x0400  /* DC1_HWC_VSEL */
+#define WM831X_DC1_HWC_VSEL_MASK                0x0400  /* DC1_HWC_VSEL */
+#define WM831X_DC1_HWC_VSEL_SHIFT                   10  /* DC1_HWC_VSEL */
+#define WM831X_DC1_HWC_VSEL_WIDTH                    1  /* DC1_HWC_VSEL */
+#define WM831X_DC1_HWC_MODE_MASK                0x0300  /* DC1_HWC_MODE - [9:8] */
+#define WM831X_DC1_HWC_MODE_SHIFT                    8  /* DC1_HWC_MODE - [9:8] */
+#define WM831X_DC1_HWC_MODE_WIDTH                    2  /* DC1_HWC_MODE - [9:8] */
+#define WM831X_DC1_HC_THR_MASK                  0x0070  /* DC1_HC_THR - [6:4] */
+#define WM831X_DC1_HC_THR_SHIFT                      4  /* DC1_HC_THR - [6:4] */
+#define WM831X_DC1_HC_THR_WIDTH                      3  /* DC1_HC_THR - [6:4] */
+#define WM831X_DC1_HC_IND_ENA                   0x0001  /* DC1_HC_IND_ENA */
+#define WM831X_DC1_HC_IND_ENA_MASK              0x0001  /* DC1_HC_IND_ENA */
+#define WM831X_DC1_HC_IND_ENA_SHIFT                  0  /* DC1_HC_IND_ENA */
+#define WM831X_DC1_HC_IND_ENA_WIDTH                  1  /* DC1_HC_IND_ENA */
+
+/*
+ * R16472 (0x4058) - DC1 ON Config
+ */
+#define WM831X_DC1_ON_SLOT_MASK                 0xE000  /* DC1_ON_SLOT - [15:13] */
+#define WM831X_DC1_ON_SLOT_SHIFT                    13  /* DC1_ON_SLOT - [15:13] */
+#define WM831X_DC1_ON_SLOT_WIDTH                     3  /* DC1_ON_SLOT - [15:13] */
+#define WM831X_DC1_ON_MODE_MASK                 0x0300  /* DC1_ON_MODE - [9:8] */
+#define WM831X_DC1_ON_MODE_SHIFT                     8  /* DC1_ON_MODE - [9:8] */
+#define WM831X_DC1_ON_MODE_WIDTH                     2  /* DC1_ON_MODE - [9:8] */
+#define WM831X_DC1_ON_VSEL_MASK                 0x007F  /* DC1_ON_VSEL - [6:0] */
+#define WM831X_DC1_ON_VSEL_SHIFT                     0  /* DC1_ON_VSEL - [6:0] */
+#define WM831X_DC1_ON_VSEL_WIDTH                     7  /* DC1_ON_VSEL - [6:0] */
+
+/*
+ * R16473 (0x4059) - DC1 SLEEP Control
+ */
+#define WM831X_DC1_SLP_SLOT_MASK                0xE000  /* DC1_SLP_SLOT - [15:13] */
+#define WM831X_DC1_SLP_SLOT_SHIFT                   13  /* DC1_SLP_SLOT - [15:13] */
+#define WM831X_DC1_SLP_SLOT_WIDTH                    3  /* DC1_SLP_SLOT - [15:13] */
+#define WM831X_DC1_SLP_MODE_MASK                0x0300  /* DC1_SLP_MODE - [9:8] */
+#define WM831X_DC1_SLP_MODE_SHIFT                    8  /* DC1_SLP_MODE - [9:8] */
+#define WM831X_DC1_SLP_MODE_WIDTH                    2  /* DC1_SLP_MODE - [9:8] */
+#define WM831X_DC1_SLP_VSEL_MASK                0x007F  /* DC1_SLP_VSEL - [6:0] */
+#define WM831X_DC1_SLP_VSEL_SHIFT                    0  /* DC1_SLP_VSEL - [6:0] */
+#define WM831X_DC1_SLP_VSEL_WIDTH                    7  /* DC1_SLP_VSEL - [6:0] */
+
+/*
+ * R16474 (0x405A) - DC1 DVS Control
+ */
+#define WM831X_DC1_DVS_SRC_MASK                 0x1800  /* DC1_DVS_SRC - [12:11] */
+#define WM831X_DC1_DVS_SRC_SHIFT                    11  /* DC1_DVS_SRC - [12:11] */
+#define WM831X_DC1_DVS_SRC_WIDTH                     2  /* DC1_DVS_SRC - [12:11] */
+#define WM831X_DC1_DVS_VSEL_MASK                0x007F  /* DC1_DVS_VSEL - [6:0] */
+#define WM831X_DC1_DVS_VSEL_SHIFT                    0  /* DC1_DVS_VSEL - [6:0] */
+#define WM831X_DC1_DVS_VSEL_WIDTH                    7  /* DC1_DVS_VSEL - [6:0] */
+
+/*
+ * R16475 (0x405B) - DC2 Control 1
+ */
+#define WM831X_DC2_RATE_MASK                    0xC000  /* DC2_RATE - [15:14] */
+#define WM831X_DC2_RATE_SHIFT                       14  /* DC2_RATE - [15:14] */
+#define WM831X_DC2_RATE_WIDTH                        2  /* DC2_RATE - [15:14] */
+#define WM831X_DC2_PHASE                        0x1000  /* DC2_PHASE */
+#define WM831X_DC2_PHASE_MASK                   0x1000  /* DC2_PHASE */
+#define WM831X_DC2_PHASE_SHIFT                      12  /* DC2_PHASE */
+#define WM831X_DC2_PHASE_WIDTH                       1  /* DC2_PHASE */
+#define WM831X_DC2_FREQ_MASK                    0x0300  /* DC2_FREQ - [9:8] */
+#define WM831X_DC2_FREQ_SHIFT                        8  /* DC2_FREQ - [9:8] */
+#define WM831X_DC2_FREQ_WIDTH                        2  /* DC2_FREQ - [9:8] */
+#define WM831X_DC2_FLT                          0x0080  /* DC2_FLT */
+#define WM831X_DC2_FLT_MASK                     0x0080  /* DC2_FLT */
+#define WM831X_DC2_FLT_SHIFT                         7  /* DC2_FLT */
+#define WM831X_DC2_FLT_WIDTH                         1  /* DC2_FLT */
+#define WM831X_DC2_SOFT_START_MASK              0x0030  /* DC2_SOFT_START - [5:4] */
+#define WM831X_DC2_SOFT_START_SHIFT                  4  /* DC2_SOFT_START - [5:4] */
+#define WM831X_DC2_SOFT_START_WIDTH                  2  /* DC2_SOFT_START - [5:4] */
+#define WM831X_DC2_CAP_MASK                     0x0003  /* DC2_CAP - [1:0] */
+#define WM831X_DC2_CAP_SHIFT                         0  /* DC2_CAP - [1:0] */
+#define WM831X_DC2_CAP_WIDTH                         2  /* DC2_CAP - [1:0] */
+
+/*
+ * R16476 (0x405C) - DC2 Control 2
+ */
+#define WM831X_DC2_ERR_ACT_MASK                 0xC000  /* DC2_ERR_ACT - [15:14] */
+#define WM831X_DC2_ERR_ACT_SHIFT                    14  /* DC2_ERR_ACT - [15:14] */
+#define WM831X_DC2_ERR_ACT_WIDTH                     2  /* DC2_ERR_ACT - [15:14] */
+#define WM831X_DC2_HWC_SRC_MASK                 0x1800  /* DC2_HWC_SRC - [12:11] */
+#define WM831X_DC2_HWC_SRC_SHIFT                    11  /* DC2_HWC_SRC - [12:11] */
+#define WM831X_DC2_HWC_SRC_WIDTH                     2  /* DC2_HWC_SRC - [12:11] */
+#define WM831X_DC2_HWC_VSEL                     0x0400  /* DC2_HWC_VSEL */
+#define WM831X_DC2_HWC_VSEL_MASK                0x0400  /* DC2_HWC_VSEL */
+#define WM831X_DC2_HWC_VSEL_SHIFT                   10  /* DC2_HWC_VSEL */
+#define WM831X_DC2_HWC_VSEL_WIDTH                    1  /* DC2_HWC_VSEL */
+#define WM831X_DC2_HWC_MODE_MASK                0x0300  /* DC2_HWC_MODE - [9:8] */
+#define WM831X_DC2_HWC_MODE_SHIFT                    8  /* DC2_HWC_MODE - [9:8] */
+#define WM831X_DC2_HWC_MODE_WIDTH                    2  /* DC2_HWC_MODE - [9:8] */
+#define WM831X_DC2_HC_THR_MASK                  0x0070  /* DC2_HC_THR - [6:4] */
+#define WM831X_DC2_HC_THR_SHIFT                      4  /* DC2_HC_THR - [6:4] */
+#define WM831X_DC2_HC_THR_WIDTH                      3  /* DC2_HC_THR - [6:4] */
+#define WM831X_DC2_HC_IND_ENA                   0x0001  /* DC2_HC_IND_ENA */
+#define WM831X_DC2_HC_IND_ENA_MASK              0x0001  /* DC2_HC_IND_ENA */
+#define WM831X_DC2_HC_IND_ENA_SHIFT                  0  /* DC2_HC_IND_ENA */
+#define WM831X_DC2_HC_IND_ENA_WIDTH                  1  /* DC2_HC_IND_ENA */
+
+/*
+ * R16477 (0x405D) - DC2 ON Config
+ */
+#define WM831X_DC2_ON_SLOT_MASK                 0xE000  /* DC2_ON_SLOT - [15:13] */
+#define WM831X_DC2_ON_SLOT_SHIFT                    13  /* DC2_ON_SLOT - [15:13] */
+#define WM831X_DC2_ON_SLOT_WIDTH                     3  /* DC2_ON_SLOT - [15:13] */
+#define WM831X_DC2_ON_MODE_MASK                 0x0300  /* DC2_ON_MODE - [9:8] */
+#define WM831X_DC2_ON_MODE_SHIFT                     8  /* DC2_ON_MODE - [9:8] */
+#define WM831X_DC2_ON_MODE_WIDTH                     2  /* DC2_ON_MODE - [9:8] */
+#define WM831X_DC2_ON_VSEL_MASK                 0x007F  /* DC2_ON_VSEL - [6:0] */
+#define WM831X_DC2_ON_VSEL_SHIFT                     0  /* DC2_ON_VSEL - [6:0] */
+#define WM831X_DC2_ON_VSEL_WIDTH                     7  /* DC2_ON_VSEL - [6:0] */
+
+/*
+ * R16478 (0x405E) - DC2 SLEEP Control
+ */
+#define WM831X_DC2_SLP_SLOT_MASK                0xE000  /* DC2_SLP_SLOT - [15:13] */
+#define WM831X_DC2_SLP_SLOT_SHIFT                   13  /* DC2_SLP_SLOT - [15:13] */
+#define WM831X_DC2_SLP_SLOT_WIDTH                    3  /* DC2_SLP_SLOT - [15:13] */
+#define WM831X_DC2_SLP_MODE_MASK                0x0300  /* DC2_SLP_MODE - [9:8] */
+#define WM831X_DC2_SLP_MODE_SHIFT                    8  /* DC2_SLP_MODE - [9:8] */
+#define WM831X_DC2_SLP_MODE_WIDTH                    2  /* DC2_SLP_MODE - [9:8] */
+#define WM831X_DC2_SLP_VSEL_MASK                0x007F  /* DC2_SLP_VSEL - [6:0] */
+#define WM831X_DC2_SLP_VSEL_SHIFT                    0  /* DC2_SLP_VSEL - [6:0] */
+#define WM831X_DC2_SLP_VSEL_WIDTH                    7  /* DC2_SLP_VSEL - [6:0] */
+
+/*
+ * R16479 (0x405F) - DC2 DVS Control
+ */
+#define WM831X_DC2_DVS_SRC_MASK                 0x1800  /* DC2_DVS_SRC - [12:11] */
+#define WM831X_DC2_DVS_SRC_SHIFT                    11  /* DC2_DVS_SRC - [12:11] */
+#define WM831X_DC2_DVS_SRC_WIDTH                     2  /* DC2_DVS_SRC - [12:11] */
+#define WM831X_DC2_DVS_VSEL_MASK                0x007F  /* DC2_DVS_VSEL - [6:0] */
+#define WM831X_DC2_DVS_VSEL_SHIFT                    0  /* DC2_DVS_VSEL - [6:0] */
+#define WM831X_DC2_DVS_VSEL_WIDTH                    7  /* DC2_DVS_VSEL - [6:0] */
+
+/*
+ * R16480 (0x4060) - DC3 Control 1
+ */
+#define WM831X_DC3_PHASE                        0x1000  /* DC3_PHASE */
+#define WM831X_DC3_PHASE_MASK                   0x1000  /* DC3_PHASE */
+#define WM831X_DC3_PHASE_SHIFT                      12  /* DC3_PHASE */
+#define WM831X_DC3_PHASE_WIDTH                       1  /* DC3_PHASE */
+#define WM831X_DC3_FLT                          0x0080  /* DC3_FLT */
+#define WM831X_DC3_FLT_MASK                     0x0080  /* DC3_FLT */
+#define WM831X_DC3_FLT_SHIFT                         7  /* DC3_FLT */
+#define WM831X_DC3_FLT_WIDTH                         1  /* DC3_FLT */
+#define WM831X_DC3_SOFT_START_MASK              0x0030  /* DC3_SOFT_START - [5:4] */
+#define WM831X_DC3_SOFT_START_SHIFT                  4  /* DC3_SOFT_START - [5:4] */
+#define WM831X_DC3_SOFT_START_WIDTH                  2  /* DC3_SOFT_START - [5:4] */
+#define WM831X_DC3_STNBY_LIM_MASK               0x000C  /* DC3_STNBY_LIM - [3:2] */
+#define WM831X_DC3_STNBY_LIM_SHIFT                   2  /* DC3_STNBY_LIM - [3:2] */
+#define WM831X_DC3_STNBY_LIM_WIDTH                   2  /* DC3_STNBY_LIM - [3:2] */
+#define WM831X_DC3_CAP_MASK                     0x0003  /* DC3_CAP - [1:0] */
+#define WM831X_DC3_CAP_SHIFT                         0  /* DC3_CAP - [1:0] */
+#define WM831X_DC3_CAP_WIDTH                         2  /* DC3_CAP - [1:0] */
+
+/*
+ * R16481 (0x4061) - DC3 Control 2
+ */
+#define WM831X_DC3_ERR_ACT_MASK                 0xC000  /* DC3_ERR_ACT - [15:14] */
+#define WM831X_DC3_ERR_ACT_SHIFT                    14  /* DC3_ERR_ACT - [15:14] */
+#define WM831X_DC3_ERR_ACT_WIDTH                     2  /* DC3_ERR_ACT - [15:14] */
+#define WM831X_DC3_HWC_SRC_MASK                 0x1800  /* DC3_HWC_SRC - [12:11] */
+#define WM831X_DC3_HWC_SRC_SHIFT                    11  /* DC3_HWC_SRC - [12:11] */
+#define WM831X_DC3_HWC_SRC_WIDTH                     2  /* DC3_HWC_SRC - [12:11] */
+#define WM831X_DC3_HWC_VSEL                     0x0400  /* DC3_HWC_VSEL */
+#define WM831X_DC3_HWC_VSEL_MASK                0x0400  /* DC3_HWC_VSEL */
+#define WM831X_DC3_HWC_VSEL_SHIFT                   10  /* DC3_HWC_VSEL */
+#define WM831X_DC3_HWC_VSEL_WIDTH                    1  /* DC3_HWC_VSEL */
+#define WM831X_DC3_HWC_MODE_MASK                0x0300  /* DC3_HWC_MODE - [9:8] */
+#define WM831X_DC3_HWC_MODE_SHIFT                    8  /* DC3_HWC_MODE - [9:8] */
+#define WM831X_DC3_HWC_MODE_WIDTH                    2  /* DC3_HWC_MODE - [9:8] */
+#define WM831X_DC3_OVP                          0x0080  /* DC3_OVP */
+#define WM831X_DC3_OVP_MASK                     0x0080  /* DC3_OVP */
+#define WM831X_DC3_OVP_SHIFT                         7  /* DC3_OVP */
+#define WM831X_DC3_OVP_WIDTH                         1  /* DC3_OVP */
+
+/*
+ * R16482 (0x4062) - DC3 ON Config
+ */
+#define WM831X_DC3_ON_SLOT_MASK                 0xE000  /* DC3_ON_SLOT - [15:13] */
+#define WM831X_DC3_ON_SLOT_SHIFT                    13  /* DC3_ON_SLOT - [15:13] */
+#define WM831X_DC3_ON_SLOT_WIDTH                     3  /* DC3_ON_SLOT - [15:13] */
+#define WM831X_DC3_ON_MODE_MASK                 0x0300  /* DC3_ON_MODE - [9:8] */
+#define WM831X_DC3_ON_MODE_SHIFT                     8  /* DC3_ON_MODE - [9:8] */
+#define WM831X_DC3_ON_MODE_WIDTH                     2  /* DC3_ON_MODE - [9:8] */
+#define WM831X_DC3_ON_VSEL_MASK                 0x007F  /* DC3_ON_VSEL - [6:0] */
+#define WM831X_DC3_ON_VSEL_SHIFT                     0  /* DC3_ON_VSEL - [6:0] */
+#define WM831X_DC3_ON_VSEL_WIDTH                     7  /* DC3_ON_VSEL - [6:0] */
+
+/*
+ * R16483 (0x4063) - DC3 SLEEP Control
+ */
+#define WM831X_DC3_SLP_SLOT_MASK                0xE000  /* DC3_SLP_SLOT - [15:13] */
+#define WM831X_DC3_SLP_SLOT_SHIFT                   13  /* DC3_SLP_SLOT - [15:13] */
+#define WM831X_DC3_SLP_SLOT_WIDTH                    3  /* DC3_SLP_SLOT - [15:13] */
+#define WM831X_DC3_SLP_MODE_MASK                0x0300  /* DC3_SLP_MODE - [9:8] */
+#define WM831X_DC3_SLP_MODE_SHIFT                    8  /* DC3_SLP_MODE - [9:8] */
+#define WM831X_DC3_SLP_MODE_WIDTH                    2  /* DC3_SLP_MODE - [9:8] */
+#define WM831X_DC3_SLP_VSEL_MASK                0x007F  /* DC3_SLP_VSEL - [6:0] */
+#define WM831X_DC3_SLP_VSEL_SHIFT                    0  /* DC3_SLP_VSEL - [6:0] */
+#define WM831X_DC3_SLP_VSEL_WIDTH                    7  /* DC3_SLP_VSEL - [6:0] */
+
+/*
+ * R16484 (0x4064) - DC4 Control
+ */
+#define WM831X_DC4_ERR_ACT_MASK                 0xC000  /* DC4_ERR_ACT - [15:14] */
+#define WM831X_DC4_ERR_ACT_SHIFT                    14  /* DC4_ERR_ACT - [15:14] */
+#define WM831X_DC4_ERR_ACT_WIDTH                     2  /* DC4_ERR_ACT - [15:14] */
+#define WM831X_DC4_HWC_SRC_MASK                 0x1800  /* DC4_HWC_SRC - [12:11] */
+#define WM831X_DC4_HWC_SRC_SHIFT                    11  /* DC4_HWC_SRC - [12:11] */
+#define WM831X_DC4_HWC_SRC_WIDTH                     2  /* DC4_HWC_SRC - [12:11] */
+#define WM831X_DC4_HWC_MODE                     0x0100  /* DC4_HWC_MODE */
+#define WM831X_DC4_HWC_MODE_MASK                0x0100  /* DC4_HWC_MODE */
+#define WM831X_DC4_HWC_MODE_SHIFT                    8  /* DC4_HWC_MODE */
+#define WM831X_DC4_HWC_MODE_WIDTH                    1  /* DC4_HWC_MODE */
+#define WM831X_DC4_RANGE_MASK                   0x000C  /* DC4_RANGE - [3:2] */
+#define WM831X_DC4_RANGE_SHIFT                       2  /* DC4_RANGE - [3:2] */
+#define WM831X_DC4_RANGE_WIDTH                       2  /* DC4_RANGE - [3:2] */
+#define WM831X_DC4_FBSRC                        0x0001  /* DC4_FBSRC */
+#define WM831X_DC4_FBSRC_MASK                   0x0001  /* DC4_FBSRC */
+#define WM831X_DC4_FBSRC_SHIFT                       0  /* DC4_FBSRC */
+#define WM831X_DC4_FBSRC_WIDTH                       1  /* DC4_FBSRC */
+
+/*
+ * R16485 (0x4065) - DC4 SLEEP Control
+ */
+#define WM831X_DC4_SLPENA                       0x0100  /* DC4_SLPENA */
+#define WM831X_DC4_SLPENA_MASK                  0x0100  /* DC4_SLPENA */
+#define WM831X_DC4_SLPENA_SHIFT                      8  /* DC4_SLPENA */
+#define WM831X_DC4_SLPENA_WIDTH                      1  /* DC4_SLPENA */
+
+/*
+ * R16488 (0x4068) - LDO1 Control
+ */
+#define WM831X_LDO1_ERR_ACT_MASK                0xC000  /* LDO1_ERR_ACT - [15:14] */
+#define WM831X_LDO1_ERR_ACT_SHIFT                   14  /* LDO1_ERR_ACT - [15:14] */
+#define WM831X_LDO1_ERR_ACT_WIDTH                    2  /* LDO1_ERR_ACT - [15:14] */
+#define WM831X_LDO1_HWC_SRC_MASK                0x1800  /* LDO1_HWC_SRC - [12:11] */
+#define WM831X_LDO1_HWC_SRC_SHIFT                   11  /* LDO1_HWC_SRC - [12:11] */
+#define WM831X_LDO1_HWC_SRC_WIDTH                    2  /* LDO1_HWC_SRC - [12:11] */
+#define WM831X_LDO1_HWC_VSEL                    0x0400  /* LDO1_HWC_VSEL */
+#define WM831X_LDO1_HWC_VSEL_MASK               0x0400  /* LDO1_HWC_VSEL */
+#define WM831X_LDO1_HWC_VSEL_SHIFT                  10  /* LDO1_HWC_VSEL */
+#define WM831X_LDO1_HWC_VSEL_WIDTH                   1  /* LDO1_HWC_VSEL */
+#define WM831X_LDO1_HWC_MODE_MASK               0x0300  /* LDO1_HWC_MODE - [9:8] */
+#define WM831X_LDO1_HWC_MODE_SHIFT                   8  /* LDO1_HWC_MODE - [9:8] */
+#define WM831X_LDO1_HWC_MODE_WIDTH                   2  /* LDO1_HWC_MODE - [9:8] */
+#define WM831X_LDO1_FLT                         0x0080  /* LDO1_FLT */
+#define WM831X_LDO1_FLT_MASK                    0x0080  /* LDO1_FLT */
+#define WM831X_LDO1_FLT_SHIFT                        7  /* LDO1_FLT */
+#define WM831X_LDO1_FLT_WIDTH                        1  /* LDO1_FLT */
+#define WM831X_LDO1_SWI                         0x0040  /* LDO1_SWI */
+#define WM831X_LDO1_SWI_MASK                    0x0040  /* LDO1_SWI */
+#define WM831X_LDO1_SWI_SHIFT                        6  /* LDO1_SWI */
+#define WM831X_LDO1_SWI_WIDTH                        1  /* LDO1_SWI */
+#define WM831X_LDO1_LP_MODE                     0x0001  /* LDO1_LP_MODE */
+#define WM831X_LDO1_LP_MODE_MASK                0x0001  /* LDO1_LP_MODE */
+#define WM831X_LDO1_LP_MODE_SHIFT                    0  /* LDO1_LP_MODE */
+#define WM831X_LDO1_LP_MODE_WIDTH                    1  /* LDO1_LP_MODE */
+
+/*
+ * R16489 (0x4069) - LDO1 ON Control
+ */
+#define WM831X_LDO1_ON_SLOT_MASK                0xE000  /* LDO1_ON_SLOT - [15:13] */
+#define WM831X_LDO1_ON_SLOT_SHIFT                   13  /* LDO1_ON_SLOT - [15:13] */
+#define WM831X_LDO1_ON_SLOT_WIDTH                    3  /* LDO1_ON_SLOT - [15:13] */
+#define WM831X_LDO1_ON_MODE                     0x0100  /* LDO1_ON_MODE */
+#define WM831X_LDO1_ON_MODE_MASK                0x0100  /* LDO1_ON_MODE */
+#define WM831X_LDO1_ON_MODE_SHIFT                    8  /* LDO1_ON_MODE */
+#define WM831X_LDO1_ON_MODE_WIDTH                    1  /* LDO1_ON_MODE */
+#define WM831X_LDO1_ON_VSEL_MASK                0x001F  /* LDO1_ON_VSEL - [4:0] */
+#define WM831X_LDO1_ON_VSEL_SHIFT                    0  /* LDO1_ON_VSEL - [4:0] */
+#define WM831X_LDO1_ON_VSEL_WIDTH                    5  /* LDO1_ON_VSEL - [4:0] */
+
+/*
+ * R16490 (0x406A) - LDO1 SLEEP Control
+ */
+#define WM831X_LDO1_SLP_SLOT_MASK               0xE000  /* LDO1_SLP_SLOT - [15:13] */
+#define WM831X_LDO1_SLP_SLOT_SHIFT                  13  /* LDO1_SLP_SLOT - [15:13] */
+#define WM831X_LDO1_SLP_SLOT_WIDTH                   3  /* LDO1_SLP_SLOT - [15:13] */
+#define WM831X_LDO1_SLP_MODE                    0x0100  /* LDO1_SLP_MODE */
+#define WM831X_LDO1_SLP_MODE_MASK               0x0100  /* LDO1_SLP_MODE */
+#define WM831X_LDO1_SLP_MODE_SHIFT                   8  /* LDO1_SLP_MODE */
+#define WM831X_LDO1_SLP_MODE_WIDTH                   1  /* LDO1_SLP_MODE */
+#define WM831X_LDO1_SLP_VSEL_MASK               0x001F  /* LDO1_SLP_VSEL - [4:0] */
+#define WM831X_LDO1_SLP_VSEL_SHIFT                   0  /* LDO1_SLP_VSEL - [4:0] */
+#define WM831X_LDO1_SLP_VSEL_WIDTH                   5  /* LDO1_SLP_VSEL - [4:0] */
+
+/*
+ * R16491 (0x406B) - LDO2 Control
+ */
+#define WM831X_LDO2_ERR_ACT_MASK                0xC000  /* LDO2_ERR_ACT - [15:14] */
+#define WM831X_LDO2_ERR_ACT_SHIFT                   14  /* LDO2_ERR_ACT - [15:14] */
+#define WM831X_LDO2_ERR_ACT_WIDTH                    2  /* LDO2_ERR_ACT - [15:14] */
+#define WM831X_LDO2_HWC_SRC_MASK                0x1800  /* LDO2_HWC_SRC - [12:11] */
+#define WM831X_LDO2_HWC_SRC_SHIFT                   11  /* LDO2_HWC_SRC - [12:11] */
+#define WM831X_LDO2_HWC_SRC_WIDTH                    2  /* LDO2_HWC_SRC - [12:11] */
+#define WM831X_LDO2_HWC_VSEL                    0x0400  /* LDO2_HWC_VSEL */
+#define WM831X_LDO2_HWC_VSEL_MASK               0x0400  /* LDO2_HWC_VSEL */
+#define WM831X_LDO2_HWC_VSEL_SHIFT                  10  /* LDO2_HWC_VSEL */
+#define WM831X_LDO2_HWC_VSEL_WIDTH                   1  /* LDO2_HWC_VSEL */
+#define WM831X_LDO2_HWC_MODE_MASK               0x0300  /* LDO2_HWC_MODE - [9:8] */
+#define WM831X_LDO2_HWC_MODE_SHIFT                   8  /* LDO2_HWC_MODE - [9:8] */
+#define WM831X_LDO2_HWC_MODE_WIDTH                   2  /* LDO2_HWC_MODE - [9:8] */
+#define WM831X_LDO2_FLT                         0x0080  /* LDO2_FLT */
+#define WM831X_LDO2_FLT_MASK                    0x0080  /* LDO2_FLT */
+#define WM831X_LDO2_FLT_SHIFT                        7  /* LDO2_FLT */
+#define WM831X_LDO2_FLT_WIDTH                        1  /* LDO2_FLT */
+#define WM831X_LDO2_SWI                         0x0040  /* LDO2_SWI */
+#define WM831X_LDO2_SWI_MASK                    0x0040  /* LDO2_SWI */
+#define WM831X_LDO2_SWI_SHIFT                        6  /* LDO2_SWI */
+#define WM831X_LDO2_SWI_WIDTH                        1  /* LDO2_SWI */
+#define WM831X_LDO2_LP_MODE                     0x0001  /* LDO2_LP_MODE */
+#define WM831X_LDO2_LP_MODE_MASK                0x0001  /* LDO2_LP_MODE */
+#define WM831X_LDO2_LP_MODE_SHIFT                    0  /* LDO2_LP_MODE */
+#define WM831X_LDO2_LP_MODE_WIDTH                    1  /* LDO2_LP_MODE */
+
+/*
+ * R16492 (0x406C) - LDO2 ON Control
+ */
+#define WM831X_LDO2_ON_SLOT_MASK                0xE000  /* LDO2_ON_SLOT - [15:13] */
+#define WM831X_LDO2_ON_SLOT_SHIFT                   13  /* LDO2_ON_SLOT - [15:13] */
+#define WM831X_LDO2_ON_SLOT_WIDTH                    3  /* LDO2_ON_SLOT - [15:13] */
+#define WM831X_LDO2_ON_MODE                     0x0100  /* LDO2_ON_MODE */
+#define WM831X_LDO2_ON_MODE_MASK                0x0100  /* LDO2_ON_MODE */
+#define WM831X_LDO2_ON_MODE_SHIFT                    8  /* LDO2_ON_MODE */
+#define WM831X_LDO2_ON_MODE_WIDTH                    1  /* LDO2_ON_MODE */
+#define WM831X_LDO2_ON_VSEL_MASK                0x001F  /* LDO2_ON_VSEL - [4:0] */
+#define WM831X_LDO2_ON_VSEL_SHIFT                    0  /* LDO2_ON_VSEL - [4:0] */
+#define WM831X_LDO2_ON_VSEL_WIDTH                    5  /* LDO2_ON_VSEL - [4:0] */
+
+/*
+ * R16493 (0x406D) - LDO2 SLEEP Control
+ */
+#define WM831X_LDO2_SLP_SLOT_MASK               0xE000  /* LDO2_SLP_SLOT - [15:13] */
+#define WM831X_LDO2_SLP_SLOT_SHIFT                  13  /* LDO2_SLP_SLOT - [15:13] */
+#define WM831X_LDO2_SLP_SLOT_WIDTH                   3  /* LDO2_SLP_SLOT - [15:13] */
+#define WM831X_LDO2_SLP_MODE                    0x0100  /* LDO2_SLP_MODE */
+#define WM831X_LDO2_SLP_MODE_MASK               0x0100  /* LDO2_SLP_MODE */
+#define WM831X_LDO2_SLP_MODE_SHIFT                   8  /* LDO2_SLP_MODE */
+#define WM831X_LDO2_SLP_MODE_WIDTH                   1  /* LDO2_SLP_MODE */
+#define WM831X_LDO2_SLP_VSEL_MASK               0x001F  /* LDO2_SLP_VSEL - [4:0] */
+#define WM831X_LDO2_SLP_VSEL_SHIFT                   0  /* LDO2_SLP_VSEL - [4:0] */
+#define WM831X_LDO2_SLP_VSEL_WIDTH                   5  /* LDO2_SLP_VSEL - [4:0] */
+
+/*
+ * R16494 (0x406E) - LDO3 Control
+ */
+#define WM831X_LDO3_ERR_ACT_MASK                0xC000  /* LDO3_ERR_ACT - [15:14] */
+#define WM831X_LDO3_ERR_ACT_SHIFT                   14  /* LDO3_ERR_ACT - [15:14] */
+#define WM831X_LDO3_ERR_ACT_WIDTH                    2  /* LDO3_ERR_ACT - [15:14] */
+#define WM831X_LDO3_HWC_SRC_MASK                0x1800  /* LDO3_HWC_SRC - [12:11] */
+#define WM831X_LDO3_HWC_SRC_SHIFT                   11  /* LDO3_HWC_SRC - [12:11] */
+#define WM831X_LDO3_HWC_SRC_WIDTH                    2  /* LDO3_HWC_SRC - [12:11] */
+#define WM831X_LDO3_HWC_VSEL                    0x0400  /* LDO3_HWC_VSEL */
+#define WM831X_LDO3_HWC_VSEL_MASK               0x0400  /* LDO3_HWC_VSEL */
+#define WM831X_LDO3_HWC_VSEL_SHIFT                  10  /* LDO3_HWC_VSEL */
+#define WM831X_LDO3_HWC_VSEL_WIDTH                   1  /* LDO3_HWC_VSEL */
+#define WM831X_LDO3_HWC_MODE_MASK               0x0300  /* LDO3_HWC_MODE - [9:8] */
+#define WM831X_LDO3_HWC_MODE_SHIFT                   8  /* LDO3_HWC_MODE - [9:8] */
+#define WM831X_LDO3_HWC_MODE_WIDTH                   2  /* LDO3_HWC_MODE - [9:8] */
+#define WM831X_LDO3_FLT                         0x0080  /* LDO3_FLT */
+#define WM831X_LDO3_FLT_MASK                    0x0080  /* LDO3_FLT */
+#define WM831X_LDO3_FLT_SHIFT                        7  /* LDO3_FLT */
+#define WM831X_LDO3_FLT_WIDTH                        1  /* LDO3_FLT */
+#define WM831X_LDO3_SWI                         0x0040  /* LDO3_SWI */
+#define WM831X_LDO3_SWI_MASK                    0x0040  /* LDO3_SWI */
+#define WM831X_LDO3_SWI_SHIFT                        6  /* LDO3_SWI */
+#define WM831X_LDO3_SWI_WIDTH                        1  /* LDO3_SWI */
+#define WM831X_LDO3_LP_MODE                     0x0001  /* LDO3_LP_MODE */
+#define WM831X_LDO3_LP_MODE_MASK                0x0001  /* LDO3_LP_MODE */
+#define WM831X_LDO3_LP_MODE_SHIFT                    0  /* LDO3_LP_MODE */
+#define WM831X_LDO3_LP_MODE_WIDTH                    1  /* LDO3_LP_MODE */
+
+/*
+ * R16495 (0x406F) - LDO3 ON Control
+ */
+#define WM831X_LDO3_ON_SLOT_MASK                0xE000  /* LDO3_ON_SLOT - [15:13] */
+#define WM831X_LDO3_ON_SLOT_SHIFT                   13  /* LDO3_ON_SLOT - [15:13] */
+#define WM831X_LDO3_ON_SLOT_WIDTH                    3  /* LDO3_ON_SLOT - [15:13] */
+#define WM831X_LDO3_ON_MODE                     0x0100  /* LDO3_ON_MODE */
+#define WM831X_LDO3_ON_MODE_MASK                0x0100  /* LDO3_ON_MODE */
+#define WM831X_LDO3_ON_MODE_SHIFT                    8  /* LDO3_ON_MODE */
+#define WM831X_LDO3_ON_MODE_WIDTH                    1  /* LDO3_ON_MODE */
+#define WM831X_LDO3_ON_VSEL_MASK                0x001F  /* LDO3_ON_VSEL - [4:0] */
+#define WM831X_LDO3_ON_VSEL_SHIFT                    0  /* LDO3_ON_VSEL - [4:0] */
+#define WM831X_LDO3_ON_VSEL_WIDTH                    5  /* LDO3_ON_VSEL - [4:0] */
+
+/*
+ * R16496 (0x4070) - LDO3 SLEEP Control
+ */
+#define WM831X_LDO3_SLP_SLOT_MASK               0xE000  /* LDO3_SLP_SLOT - [15:13] */
+#define WM831X_LDO3_SLP_SLOT_SHIFT                  13  /* LDO3_SLP_SLOT - [15:13] */
+#define WM831X_LDO3_SLP_SLOT_WIDTH                   3  /* LDO3_SLP_SLOT - [15:13] */
+#define WM831X_LDO3_SLP_MODE                    0x0100  /* LDO3_SLP_MODE */
+#define WM831X_LDO3_SLP_MODE_MASK               0x0100  /* LDO3_SLP_MODE */
+#define WM831X_LDO3_SLP_MODE_SHIFT                   8  /* LDO3_SLP_MODE */
+#define WM831X_LDO3_SLP_MODE_WIDTH                   1  /* LDO3_SLP_MODE */
+#define WM831X_LDO3_SLP_VSEL_MASK               0x001F  /* LDO3_SLP_VSEL - [4:0] */
+#define WM831X_LDO3_SLP_VSEL_SHIFT                   0  /* LDO3_SLP_VSEL - [4:0] */
+#define WM831X_LDO3_SLP_VSEL_WIDTH                   5  /* LDO3_SLP_VSEL - [4:0] */
+
+/*
+ * R16497 (0x4071) - LDO4 Control
+ */
+#define WM831X_LDO4_ERR_ACT_MASK                0xC000  /* LDO4_ERR_ACT - [15:14] */
+#define WM831X_LDO4_ERR_ACT_SHIFT                   14  /* LDO4_ERR_ACT - [15:14] */
+#define WM831X_LDO4_ERR_ACT_WIDTH                    2  /* LDO4_ERR_ACT - [15:14] */
+#define WM831X_LDO4_HWC_SRC_MASK                0x1800  /* LDO4_HWC_SRC - [12:11] */
+#define WM831X_LDO4_HWC_SRC_SHIFT                   11  /* LDO4_HWC_SRC - [12:11] */
+#define WM831X_LDO4_HWC_SRC_WIDTH                    2  /* LDO4_HWC_SRC - [12:11] */
+#define WM831X_LDO4_HWC_VSEL                    0x0400  /* LDO4_HWC_VSEL */
+#define WM831X_LDO4_HWC_VSEL_MASK               0x0400  /* LDO4_HWC_VSEL */
+#define WM831X_LDO4_HWC_VSEL_SHIFT                  10  /* LDO4_HWC_VSEL */
+#define WM831X_LDO4_HWC_VSEL_WIDTH                   1  /* LDO4_HWC_VSEL */
+#define WM831X_LDO4_HWC_MODE_MASK               0x0300  /* LDO4_HWC_MODE - [9:8] */
+#define WM831X_LDO4_HWC_MODE_SHIFT                   8  /* LDO4_HWC_MODE - [9:8] */
+#define WM831X_LDO4_HWC_MODE_WIDTH                   2  /* LDO4_HWC_MODE - [9:8] */
+#define WM831X_LDO4_FLT                         0x0080  /* LDO4_FLT */
+#define WM831X_LDO4_FLT_MASK                    0x0080  /* LDO4_FLT */
+#define WM831X_LDO4_FLT_SHIFT                        7  /* LDO4_FLT */
+#define WM831X_LDO4_FLT_WIDTH                        1  /* LDO4_FLT */
+#define WM831X_LDO4_SWI                         0x0040  /* LDO4_SWI */
+#define WM831X_LDO4_SWI_MASK                    0x0040  /* LDO4_SWI */
+#define WM831X_LDO4_SWI_SHIFT                        6  /* LDO4_SWI */
+#define WM831X_LDO4_SWI_WIDTH                        1  /* LDO4_SWI */
+#define WM831X_LDO4_LP_MODE                     0x0001  /* LDO4_LP_MODE */
+#define WM831X_LDO4_LP_MODE_MASK                0x0001  /* LDO4_LP_MODE */
+#define WM831X_LDO4_LP_MODE_SHIFT                    0  /* LDO4_LP_MODE */
+#define WM831X_LDO4_LP_MODE_WIDTH                    1  /* LDO4_LP_MODE */
+
+/*
+ * R16498 (0x4072) - LDO4 ON Control
+ */
+#define WM831X_LDO4_ON_SLOT_MASK                0xE000  /* LDO4_ON_SLOT - [15:13] */
+#define WM831X_LDO4_ON_SLOT_SHIFT                   13  /* LDO4_ON_SLOT - [15:13] */
+#define WM831X_LDO4_ON_SLOT_WIDTH                    3  /* LDO4_ON_SLOT - [15:13] */
+#define WM831X_LDO4_ON_MODE                     0x0100  /* LDO4_ON_MODE */
+#define WM831X_LDO4_ON_MODE_MASK                0x0100  /* LDO4_ON_MODE */
+#define WM831X_LDO4_ON_MODE_SHIFT                    8  /* LDO4_ON_MODE */
+#define WM831X_LDO4_ON_MODE_WIDTH                    1  /* LDO4_ON_MODE */
+#define WM831X_LDO4_ON_VSEL_MASK                0x001F  /* LDO4_ON_VSEL - [4:0] */
+#define WM831X_LDO4_ON_VSEL_SHIFT                    0  /* LDO4_ON_VSEL - [4:0] */
+#define WM831X_LDO4_ON_VSEL_WIDTH                    5  /* LDO4_ON_VSEL - [4:0] */
+
+/*
+ * R16499 (0x4073) - LDO4 SLEEP Control
+ */
+#define WM831X_LDO4_SLP_SLOT_MASK               0xE000  /* LDO4_SLP_SLOT - [15:13] */
+#define WM831X_LDO4_SLP_SLOT_SHIFT                  13  /* LDO4_SLP_SLOT - [15:13] */
+#define WM831X_LDO4_SLP_SLOT_WIDTH                   3  /* LDO4_SLP_SLOT - [15:13] */
+#define WM831X_LDO4_SLP_MODE                    0x0100  /* LDO4_SLP_MODE */
+#define WM831X_LDO4_SLP_MODE_MASK               0x0100  /* LDO4_SLP_MODE */
+#define WM831X_LDO4_SLP_MODE_SHIFT                   8  /* LDO4_SLP_MODE */
+#define WM831X_LDO4_SLP_MODE_WIDTH                   1  /* LDO4_SLP_MODE */
+#define WM831X_LDO4_SLP_VSEL_MASK               0x001F  /* LDO4_SLP_VSEL - [4:0] */
+#define WM831X_LDO4_SLP_VSEL_SHIFT                   0  /* LDO4_SLP_VSEL - [4:0] */
+#define WM831X_LDO4_SLP_VSEL_WIDTH                   5  /* LDO4_SLP_VSEL - [4:0] */
+
+/*
+ * R16500 (0x4074) - LDO5 Control
+ */
+#define WM831X_LDO5_ERR_ACT_MASK                0xC000  /* LDO5_ERR_ACT - [15:14] */
+#define WM831X_LDO5_ERR_ACT_SHIFT                   14  /* LDO5_ERR_ACT - [15:14] */
+#define WM831X_LDO5_ERR_ACT_WIDTH                    2  /* LDO5_ERR_ACT - [15:14] */
+#define WM831X_LDO5_HWC_SRC_MASK                0x1800  /* LDO5_HWC_SRC - [12:11] */
+#define WM831X_LDO5_HWC_SRC_SHIFT                   11  /* LDO5_HWC_SRC - [12:11] */
+#define WM831X_LDO5_HWC_SRC_WIDTH                    2  /* LDO5_HWC_SRC - [12:11] */
+#define WM831X_LDO5_HWC_VSEL                    0x0400  /* LDO5_HWC_VSEL */
+#define WM831X_LDO5_HWC_VSEL_MASK               0x0400  /* LDO5_HWC_VSEL */
+#define WM831X_LDO5_HWC_VSEL_SHIFT                  10  /* LDO5_HWC_VSEL */
+#define WM831X_LDO5_HWC_VSEL_WIDTH                   1  /* LDO5_HWC_VSEL */
+#define WM831X_LDO5_HWC_MODE_MASK               0x0300  /* LDO5_HWC_MODE - [9:8] */
+#define WM831X_LDO5_HWC_MODE_SHIFT                   8  /* LDO5_HWC_MODE - [9:8] */
+#define WM831X_LDO5_HWC_MODE_WIDTH                   2  /* LDO5_HWC_MODE - [9:8] */
+#define WM831X_LDO5_FLT                         0x0080  /* LDO5_FLT */
+#define WM831X_LDO5_FLT_MASK                    0x0080  /* LDO5_FLT */
+#define WM831X_LDO5_FLT_SHIFT                        7  /* LDO5_FLT */
+#define WM831X_LDO5_FLT_WIDTH                        1  /* LDO5_FLT */
+#define WM831X_LDO5_SWI                         0x0040  /* LDO5_SWI */
+#define WM831X_LDO5_SWI_MASK                    0x0040  /* LDO5_SWI */
+#define WM831X_LDO5_SWI_SHIFT                        6  /* LDO5_SWI */
+#define WM831X_LDO5_SWI_WIDTH                        1  /* LDO5_SWI */
+#define WM831X_LDO5_LP_MODE                     0x0001  /* LDO5_LP_MODE */
+#define WM831X_LDO5_LP_MODE_MASK                0x0001  /* LDO5_LP_MODE */
+#define WM831X_LDO5_LP_MODE_SHIFT                    0  /* LDO5_LP_MODE */
+#define WM831X_LDO5_LP_MODE_WIDTH                    1  /* LDO5_LP_MODE */
+
+/*
+ * R16501 (0x4075) - LDO5 ON Control
+ */
+#define WM831X_LDO5_ON_SLOT_MASK                0xE000  /* LDO5_ON_SLOT - [15:13] */
+#define WM831X_LDO5_ON_SLOT_SHIFT                   13  /* LDO5_ON_SLOT - [15:13] */
+#define WM831X_LDO5_ON_SLOT_WIDTH                    3  /* LDO5_ON_SLOT - [15:13] */
+#define WM831X_LDO5_ON_MODE                     0x0100  /* LDO5_ON_MODE */
+#define WM831X_LDO5_ON_MODE_MASK                0x0100  /* LDO5_ON_MODE */
+#define WM831X_LDO5_ON_MODE_SHIFT                    8  /* LDO5_ON_MODE */
+#define WM831X_LDO5_ON_MODE_WIDTH                    1  /* LDO5_ON_MODE */
+#define WM831X_LDO5_ON_VSEL_MASK                0x001F  /* LDO5_ON_VSEL - [4:0] */
+#define WM831X_LDO5_ON_VSEL_SHIFT                    0  /* LDO5_ON_VSEL - [4:0] */
+#define WM831X_LDO5_ON_VSEL_WIDTH                    5  /* LDO5_ON_VSEL - [4:0] */
+
+/*
+ * R16502 (0x4076) - LDO5 SLEEP Control
+ */
+#define WM831X_LDO5_SLP_SLOT_MASK               0xE000  /* LDO5_SLP_SLOT - [15:13] */
+#define WM831X_LDO5_SLP_SLOT_SHIFT                  13  /* LDO5_SLP_SLOT - [15:13] */
+#define WM831X_LDO5_SLP_SLOT_WIDTH                   3  /* LDO5_SLP_SLOT - [15:13] */
+#define WM831X_LDO5_SLP_MODE                    0x0100  /* LDO5_SLP_MODE */
+#define WM831X_LDO5_SLP_MODE_MASK               0x0100  /* LDO5_SLP_MODE */
+#define WM831X_LDO5_SLP_MODE_SHIFT                   8  /* LDO5_SLP_MODE */
+#define WM831X_LDO5_SLP_MODE_WIDTH                   1  /* LDO5_SLP_MODE */
+#define WM831X_LDO5_SLP_VSEL_MASK               0x001F  /* LDO5_SLP_VSEL - [4:0] */
+#define WM831X_LDO5_SLP_VSEL_SHIFT                   0  /* LDO5_SLP_VSEL - [4:0] */
+#define WM831X_LDO5_SLP_VSEL_WIDTH                   5  /* LDO5_SLP_VSEL - [4:0] */
+
+/*
+ * R16503 (0x4077) - LDO6 Control
+ */
+#define WM831X_LDO6_ERR_ACT_MASK                0xC000  /* LDO6_ERR_ACT - [15:14] */
+#define WM831X_LDO6_ERR_ACT_SHIFT                   14  /* LDO6_ERR_ACT - [15:14] */
+#define WM831X_LDO6_ERR_ACT_WIDTH                    2  /* LDO6_ERR_ACT - [15:14] */
+#define WM831X_LDO6_HWC_SRC_MASK                0x1800  /* LDO6_HWC_SRC - [12:11] */
+#define WM831X_LDO6_HWC_SRC_SHIFT                   11  /* LDO6_HWC_SRC - [12:11] */
+#define WM831X_LDO6_HWC_SRC_WIDTH                    2  /* LDO6_HWC_SRC - [12:11] */
+#define WM831X_LDO6_HWC_VSEL                    0x0400  /* LDO6_HWC_VSEL */
+#define WM831X_LDO6_HWC_VSEL_MASK               0x0400  /* LDO6_HWC_VSEL */
+#define WM831X_LDO6_HWC_VSEL_SHIFT                  10  /* LDO6_HWC_VSEL */
+#define WM831X_LDO6_HWC_VSEL_WIDTH                   1  /* LDO6_HWC_VSEL */
+#define WM831X_LDO6_HWC_MODE_MASK               0x0300  /* LDO6_HWC_MODE - [9:8] */
+#define WM831X_LDO6_HWC_MODE_SHIFT                   8  /* LDO6_HWC_MODE - [9:8] */
+#define WM831X_LDO6_HWC_MODE_WIDTH                   2  /* LDO6_HWC_MODE - [9:8] */
+#define WM831X_LDO6_FLT                         0x0080  /* LDO6_FLT */
+#define WM831X_LDO6_FLT_MASK                    0x0080  /* LDO6_FLT */
+#define WM831X_LDO6_FLT_SHIFT                        7  /* LDO6_FLT */
+#define WM831X_LDO6_FLT_WIDTH                        1  /* LDO6_FLT */
+#define WM831X_LDO6_SWI                         0x0040  /* LDO6_SWI */
+#define WM831X_LDO6_SWI_MASK                    0x0040  /* LDO6_SWI */
+#define WM831X_LDO6_SWI_SHIFT                        6  /* LDO6_SWI */
+#define WM831X_LDO6_SWI_WIDTH                        1  /* LDO6_SWI */
+#define WM831X_LDO6_LP_MODE                     0x0001  /* LDO6_LP_MODE */
+#define WM831X_LDO6_LP_MODE_MASK                0x0001  /* LDO6_LP_MODE */
+#define WM831X_LDO6_LP_MODE_SHIFT                    0  /* LDO6_LP_MODE */
+#define WM831X_LDO6_LP_MODE_WIDTH                    1  /* LDO6_LP_MODE */
+
+/*
+ * R16504 (0x4078) - LDO6 ON Control
+ */
+#define WM831X_LDO6_ON_SLOT_MASK                0xE000  /* LDO6_ON_SLOT - [15:13] */
+#define WM831X_LDO6_ON_SLOT_SHIFT                   13  /* LDO6_ON_SLOT - [15:13] */
+#define WM831X_LDO6_ON_SLOT_WIDTH                    3  /* LDO6_ON_SLOT - [15:13] */
+#define WM831X_LDO6_ON_MODE                     0x0100  /* LDO6_ON_MODE */
+#define WM831X_LDO6_ON_MODE_MASK                0x0100  /* LDO6_ON_MODE */
+#define WM831X_LDO6_ON_MODE_SHIFT                    8  /* LDO6_ON_MODE */
+#define WM831X_LDO6_ON_MODE_WIDTH                    1  /* LDO6_ON_MODE */
+#define WM831X_LDO6_ON_VSEL_MASK                0x001F  /* LDO6_ON_VSEL - [4:0] */
+#define WM831X_LDO6_ON_VSEL_SHIFT                    0  /* LDO6_ON_VSEL - [4:0] */
+#define WM831X_LDO6_ON_VSEL_WIDTH                    5  /* LDO6_ON_VSEL - [4:0] */
+
+/*
+ * R16505 (0x4079) - LDO6 SLEEP Control
+ */
+#define WM831X_LDO6_SLP_SLOT_MASK               0xE000  /* LDO6_SLP_SLOT - [15:13] */
+#define WM831X_LDO6_SLP_SLOT_SHIFT                  13  /* LDO6_SLP_SLOT - [15:13] */
+#define WM831X_LDO6_SLP_SLOT_WIDTH                   3  /* LDO6_SLP_SLOT - [15:13] */
+#define WM831X_LDO6_SLP_MODE                    0x0100  /* LDO6_SLP_MODE */
+#define WM831X_LDO6_SLP_MODE_MASK               0x0100  /* LDO6_SLP_MODE */
+#define WM831X_LDO6_SLP_MODE_SHIFT                   8  /* LDO6_SLP_MODE */
+#define WM831X_LDO6_SLP_MODE_WIDTH                   1  /* LDO6_SLP_MODE */
+#define WM831X_LDO6_SLP_VSEL_MASK               0x001F  /* LDO6_SLP_VSEL - [4:0] */
+#define WM831X_LDO6_SLP_VSEL_SHIFT                   0  /* LDO6_SLP_VSEL - [4:0] */
+#define WM831X_LDO6_SLP_VSEL_WIDTH                   5  /* LDO6_SLP_VSEL - [4:0] */
+
+/*
+ * R16506 (0x407A) - LDO7 Control
+ */
+#define WM831X_LDO7_ERR_ACT_MASK                0xC000  /* LDO7_ERR_ACT - [15:14] */
+#define WM831X_LDO7_ERR_ACT_SHIFT                   14  /* LDO7_ERR_ACT - [15:14] */
+#define WM831X_LDO7_ERR_ACT_WIDTH                    2  /* LDO7_ERR_ACT - [15:14] */
+#define WM831X_LDO7_HWC_SRC_MASK                0x1800  /* LDO7_HWC_SRC - [12:11] */
+#define WM831X_LDO7_HWC_SRC_SHIFT                   11  /* LDO7_HWC_SRC - [12:11] */
+#define WM831X_LDO7_HWC_SRC_WIDTH                    2  /* LDO7_HWC_SRC - [12:11] */
+#define WM831X_LDO7_HWC_VSEL                    0x0400  /* LDO7_HWC_VSEL */
+#define WM831X_LDO7_HWC_VSEL_MASK               0x0400  /* LDO7_HWC_VSEL */
+#define WM831X_LDO7_HWC_VSEL_SHIFT                  10  /* LDO7_HWC_VSEL */
+#define WM831X_LDO7_HWC_VSEL_WIDTH                   1  /* LDO7_HWC_VSEL */
+#define WM831X_LDO7_HWC_MODE_MASK               0x0300  /* LDO7_HWC_MODE - [9:8] */
+#define WM831X_LDO7_HWC_MODE_SHIFT                   8  /* LDO7_HWC_MODE - [9:8] */
+#define WM831X_LDO7_HWC_MODE_WIDTH                   2  /* LDO7_HWC_MODE - [9:8] */
+#define WM831X_LDO7_FLT                         0x0080  /* LDO7_FLT */
+#define WM831X_LDO7_FLT_MASK                    0x0080  /* LDO7_FLT */
+#define WM831X_LDO7_FLT_SHIFT                        7  /* LDO7_FLT */
+#define WM831X_LDO7_FLT_WIDTH                        1  /* LDO7_FLT */
+#define WM831X_LDO7_SWI                         0x0040  /* LDO7_SWI */
+#define WM831X_LDO7_SWI_MASK                    0x0040  /* LDO7_SWI */
+#define WM831X_LDO7_SWI_SHIFT                        6  /* LDO7_SWI */
+#define WM831X_LDO7_SWI_WIDTH                        1  /* LDO7_SWI */
+
+/*
+ * R16507 (0x407B) - LDO7 ON Control
+ */
+#define WM831X_LDO7_ON_SLOT_MASK                0xE000  /* LDO7_ON_SLOT - [15:13] */
+#define WM831X_LDO7_ON_SLOT_SHIFT                   13  /* LDO7_ON_SLOT - [15:13] */
+#define WM831X_LDO7_ON_SLOT_WIDTH                    3  /* LDO7_ON_SLOT - [15:13] */
+#define WM831X_LDO7_ON_MODE                     0x0100  /* LDO7_ON_MODE */
+#define WM831X_LDO7_ON_MODE_MASK                0x0100  /* LDO7_ON_MODE */
+#define WM831X_LDO7_ON_MODE_SHIFT                    8  /* LDO7_ON_MODE */
+#define WM831X_LDO7_ON_MODE_WIDTH                    1  /* LDO7_ON_MODE */
+#define WM831X_LDO7_ON_VSEL_MASK                0x001F  /* LDO7_ON_VSEL - [4:0] */
+#define WM831X_LDO7_ON_VSEL_SHIFT                    0  /* LDO7_ON_VSEL - [4:0] */
+#define WM831X_LDO7_ON_VSEL_WIDTH                    5  /* LDO7_ON_VSEL - [4:0] */
+
+/*
+ * R16508 (0x407C) - LDO7 SLEEP Control
+ */
+#define WM831X_LDO7_SLP_SLOT_MASK               0xE000  /* LDO7_SLP_SLOT - [15:13] */
+#define WM831X_LDO7_SLP_SLOT_SHIFT                  13  /* LDO7_SLP_SLOT - [15:13] */
+#define WM831X_LDO7_SLP_SLOT_WIDTH                   3  /* LDO7_SLP_SLOT - [15:13] */
+#define WM831X_LDO7_SLP_MODE                    0x0100  /* LDO7_SLP_MODE */
+#define WM831X_LDO7_SLP_MODE_MASK               0x0100  /* LDO7_SLP_MODE */
+#define WM831X_LDO7_SLP_MODE_SHIFT                   8  /* LDO7_SLP_MODE */
+#define WM831X_LDO7_SLP_MODE_WIDTH                   1  /* LDO7_SLP_MODE */
+#define WM831X_LDO7_SLP_VSEL_MASK               0x001F  /* LDO7_SLP_VSEL - [4:0] */
+#define WM831X_LDO7_SLP_VSEL_SHIFT                   0  /* LDO7_SLP_VSEL - [4:0] */
+#define WM831X_LDO7_SLP_VSEL_WIDTH                   5  /* LDO7_SLP_VSEL - [4:0] */
+
+/*
+ * R16509 (0x407D) - LDO8 Control
+ */
+#define WM831X_LDO8_ERR_ACT_MASK                0xC000  /* LDO8_ERR_ACT - [15:14] */
+#define WM831X_LDO8_ERR_ACT_SHIFT                   14  /* LDO8_ERR_ACT - [15:14] */
+#define WM831X_LDO8_ERR_ACT_WIDTH                    2  /* LDO8_ERR_ACT - [15:14] */
+#define WM831X_LDO8_HWC_SRC_MASK                0x1800  /* LDO8_HWC_SRC - [12:11] */
+#define WM831X_LDO8_HWC_SRC_SHIFT                   11  /* LDO8_HWC_SRC - [12:11] */
+#define WM831X_LDO8_HWC_SRC_WIDTH                    2  /* LDO8_HWC_SRC - [12:11] */
+#define WM831X_LDO8_HWC_VSEL                    0x0400  /* LDO8_HWC_VSEL */
+#define WM831X_LDO8_HWC_VSEL_MASK               0x0400  /* LDO8_HWC_VSEL */
+#define WM831X_LDO8_HWC_VSEL_SHIFT                  10  /* LDO8_HWC_VSEL */
+#define WM831X_LDO8_HWC_VSEL_WIDTH                   1  /* LDO8_HWC_VSEL */
+#define WM831X_LDO8_HWC_MODE_MASK               0x0300  /* LDO8_HWC_MODE - [9:8] */
+#define WM831X_LDO8_HWC_MODE_SHIFT                   8  /* LDO8_HWC_MODE - [9:8] */
+#define WM831X_LDO8_HWC_MODE_WIDTH                   2  /* LDO8_HWC_MODE - [9:8] */
+#define WM831X_LDO8_FLT                         0x0080  /* LDO8_FLT */
+#define WM831X_LDO8_FLT_MASK                    0x0080  /* LDO8_FLT */
+#define WM831X_LDO8_FLT_SHIFT                        7  /* LDO8_FLT */
+#define WM831X_LDO8_FLT_WIDTH                        1  /* LDO8_FLT */
+#define WM831X_LDO8_SWI                         0x0040  /* LDO8_SWI */
+#define WM831X_LDO8_SWI_MASK                    0x0040  /* LDO8_SWI */
+#define WM831X_LDO8_SWI_SHIFT                        6  /* LDO8_SWI */
+#define WM831X_LDO8_SWI_WIDTH                        1  /* LDO8_SWI */
+
+/*
+ * R16510 (0x407E) - LDO8 ON Control
+ */
+#define WM831X_LDO8_ON_SLOT_MASK                0xE000  /* LDO8_ON_SLOT - [15:13] */
+#define WM831X_LDO8_ON_SLOT_SHIFT                   13  /* LDO8_ON_SLOT - [15:13] */
+#define WM831X_LDO8_ON_SLOT_WIDTH                    3  /* LDO8_ON_SLOT - [15:13] */
+#define WM831X_LDO8_ON_MODE                     0x0100  /* LDO8_ON_MODE */
+#define WM831X_LDO8_ON_MODE_MASK                0x0100  /* LDO8_ON_MODE */
+#define WM831X_LDO8_ON_MODE_SHIFT                    8  /* LDO8_ON_MODE */
+#define WM831X_LDO8_ON_MODE_WIDTH                    1  /* LDO8_ON_MODE */
+#define WM831X_LDO8_ON_VSEL_MASK                0x001F  /* LDO8_ON_VSEL - [4:0] */
+#define WM831X_LDO8_ON_VSEL_SHIFT                    0  /* LDO8_ON_VSEL - [4:0] */
+#define WM831X_LDO8_ON_VSEL_WIDTH                    5  /* LDO8_ON_VSEL - [4:0] */
+
+/*
+ * R16511 (0x407F) - LDO8 SLEEP Control
+ */
+#define WM831X_LDO8_SLP_SLOT_MASK               0xE000  /* LDO8_SLP_SLOT - [15:13] */
+#define WM831X_LDO8_SLP_SLOT_SHIFT                  13  /* LDO8_SLP_SLOT - [15:13] */
+#define WM831X_LDO8_SLP_SLOT_WIDTH                   3  /* LDO8_SLP_SLOT - [15:13] */
+#define WM831X_LDO8_SLP_MODE                    0x0100  /* LDO8_SLP_MODE */
+#define WM831X_LDO8_SLP_MODE_MASK               0x0100  /* LDO8_SLP_MODE */
+#define WM831X_LDO8_SLP_MODE_SHIFT                   8  /* LDO8_SLP_MODE */
+#define WM831X_LDO8_SLP_MODE_WIDTH                   1  /* LDO8_SLP_MODE */
+#define WM831X_LDO8_SLP_VSEL_MASK               0x001F  /* LDO8_SLP_VSEL - [4:0] */
+#define WM831X_LDO8_SLP_VSEL_SHIFT                   0  /* LDO8_SLP_VSEL - [4:0] */
+#define WM831X_LDO8_SLP_VSEL_WIDTH                   5  /* LDO8_SLP_VSEL - [4:0] */
+
+/*
+ * R16512 (0x4080) - LDO9 Control
+ */
+#define WM831X_LDO9_ERR_ACT_MASK                0xC000  /* LDO9_ERR_ACT - [15:14] */
+#define WM831X_LDO9_ERR_ACT_SHIFT                   14  /* LDO9_ERR_ACT - [15:14] */
+#define WM831X_LDO9_ERR_ACT_WIDTH                    2  /* LDO9_ERR_ACT - [15:14] */
+#define WM831X_LDO9_HWC_SRC_MASK                0x1800  /* LDO9_HWC_SRC - [12:11] */
+#define WM831X_LDO9_HWC_SRC_SHIFT                   11  /* LDO9_HWC_SRC - [12:11] */
+#define WM831X_LDO9_HWC_SRC_WIDTH                    2  /* LDO9_HWC_SRC - [12:11] */
+#define WM831X_LDO9_HWC_VSEL                    0x0400  /* LDO9_HWC_VSEL */
+#define WM831X_LDO9_HWC_VSEL_MASK               0x0400  /* LDO9_HWC_VSEL */
+#define WM831X_LDO9_HWC_VSEL_SHIFT                  10  /* LDO9_HWC_VSEL */
+#define WM831X_LDO9_HWC_VSEL_WIDTH                   1  /* LDO9_HWC_VSEL */
+#define WM831X_LDO9_HWC_MODE_MASK               0x0300  /* LDO9_HWC_MODE - [9:8] */
+#define WM831X_LDO9_HWC_MODE_SHIFT                   8  /* LDO9_HWC_MODE - [9:8] */
+#define WM831X_LDO9_HWC_MODE_WIDTH                   2  /* LDO9_HWC_MODE - [9:8] */
+#define WM831X_LDO9_FLT                         0x0080  /* LDO9_FLT */
+#define WM831X_LDO9_FLT_MASK                    0x0080  /* LDO9_FLT */
+#define WM831X_LDO9_FLT_SHIFT                        7  /* LDO9_FLT */
+#define WM831X_LDO9_FLT_WIDTH                        1  /* LDO9_FLT */
+#define WM831X_LDO9_SWI                         0x0040  /* LDO9_SWI */
+#define WM831X_LDO9_SWI_MASK                    0x0040  /* LDO9_SWI */
+#define WM831X_LDO9_SWI_SHIFT                        6  /* LDO9_SWI */
+#define WM831X_LDO9_SWI_WIDTH                        1  /* LDO9_SWI */
+
+/*
+ * R16513 (0x4081) - LDO9 ON Control
+ */
+#define WM831X_LDO9_ON_SLOT_MASK                0xE000  /* LDO9_ON_SLOT - [15:13] */
+#define WM831X_LDO9_ON_SLOT_SHIFT                   13  /* LDO9_ON_SLOT - [15:13] */
+#define WM831X_LDO9_ON_SLOT_WIDTH                    3  /* LDO9_ON_SLOT - [15:13] */
+#define WM831X_LDO9_ON_MODE                     0x0100  /* LDO9_ON_MODE */
+#define WM831X_LDO9_ON_MODE_MASK                0x0100  /* LDO9_ON_MODE */
+#define WM831X_LDO9_ON_MODE_SHIFT                    8  /* LDO9_ON_MODE */
+#define WM831X_LDO9_ON_MODE_WIDTH                    1  /* LDO9_ON_MODE */
+#define WM831X_LDO9_ON_VSEL_MASK                0x001F  /* LDO9_ON_VSEL - [4:0] */
+#define WM831X_LDO9_ON_VSEL_SHIFT                    0  /* LDO9_ON_VSEL - [4:0] */
+#define WM831X_LDO9_ON_VSEL_WIDTH                    5  /* LDO9_ON_VSEL - [4:0] */
+
+/*
+ * R16514 (0x4082) - LDO9 SLEEP Control
+ */
+#define WM831X_LDO9_SLP_SLOT_MASK               0xE000  /* LDO9_SLP_SLOT - [15:13] */
+#define WM831X_LDO9_SLP_SLOT_SHIFT                  13  /* LDO9_SLP_SLOT - [15:13] */
+#define WM831X_LDO9_SLP_SLOT_WIDTH                   3  /* LDO9_SLP_SLOT - [15:13] */
+#define WM831X_LDO9_SLP_MODE                    0x0100  /* LDO9_SLP_MODE */
+#define WM831X_LDO9_SLP_MODE_MASK               0x0100  /* LDO9_SLP_MODE */
+#define WM831X_LDO9_SLP_MODE_SHIFT                   8  /* LDO9_SLP_MODE */
+#define WM831X_LDO9_SLP_MODE_WIDTH                   1  /* LDO9_SLP_MODE */
+#define WM831X_LDO9_SLP_VSEL_MASK               0x001F  /* LDO9_SLP_VSEL - [4:0] */
+#define WM831X_LDO9_SLP_VSEL_SHIFT                   0  /* LDO9_SLP_VSEL - [4:0] */
+#define WM831X_LDO9_SLP_VSEL_WIDTH                   5  /* LDO9_SLP_VSEL - [4:0] */
+
+/*
+ * R16515 (0x4083) - LDO10 Control
+ */
+#define WM831X_LDO10_ERR_ACT_MASK               0xC000  /* LDO10_ERR_ACT - [15:14] */
+#define WM831X_LDO10_ERR_ACT_SHIFT                  14  /* LDO10_ERR_ACT - [15:14] */
+#define WM831X_LDO10_ERR_ACT_WIDTH                   2  /* LDO10_ERR_ACT - [15:14] */
+#define WM831X_LDO10_HWC_SRC_MASK               0x1800  /* LDO10_HWC_SRC - [12:11] */
+#define WM831X_LDO10_HWC_SRC_SHIFT                  11  /* LDO10_HWC_SRC - [12:11] */
+#define WM831X_LDO10_HWC_SRC_WIDTH                   2  /* LDO10_HWC_SRC - [12:11] */
+#define WM831X_LDO10_HWC_VSEL                   0x0400  /* LDO10_HWC_VSEL */
+#define WM831X_LDO10_HWC_VSEL_MASK              0x0400  /* LDO10_HWC_VSEL */
+#define WM831X_LDO10_HWC_VSEL_SHIFT                 10  /* LDO10_HWC_VSEL */
+#define WM831X_LDO10_HWC_VSEL_WIDTH                  1  /* LDO10_HWC_VSEL */
+#define WM831X_LDO10_HWC_MODE_MASK              0x0300  /* LDO10_HWC_MODE - [9:8] */
+#define WM831X_LDO10_HWC_MODE_SHIFT                  8  /* LDO10_HWC_MODE - [9:8] */
+#define WM831X_LDO10_HWC_MODE_WIDTH                  2  /* LDO10_HWC_MODE - [9:8] */
+#define WM831X_LDO10_FLT                        0x0080  /* LDO10_FLT */
+#define WM831X_LDO10_FLT_MASK                   0x0080  /* LDO10_FLT */
+#define WM831X_LDO10_FLT_SHIFT                       7  /* LDO10_FLT */
+#define WM831X_LDO10_FLT_WIDTH                       1  /* LDO10_FLT */
+#define WM831X_LDO10_SWI                        0x0040  /* LDO10_SWI */
+#define WM831X_LDO10_SWI_MASK                   0x0040  /* LDO10_SWI */
+#define WM831X_LDO10_SWI_SHIFT                       6  /* LDO10_SWI */
+#define WM831X_LDO10_SWI_WIDTH                       1  /* LDO10_SWI */
+
+/*
+ * R16516 (0x4084) - LDO10 ON Control
+ */
+#define WM831X_LDO10_ON_SLOT_MASK               0xE000  /* LDO10_ON_SLOT - [15:13] */
+#define WM831X_LDO10_ON_SLOT_SHIFT                  13  /* LDO10_ON_SLOT - [15:13] */
+#define WM831X_LDO10_ON_SLOT_WIDTH                   3  /* LDO10_ON_SLOT - [15:13] */
+#define WM831X_LDO10_ON_MODE                    0x0100  /* LDO10_ON_MODE */
+#define WM831X_LDO10_ON_MODE_MASK               0x0100  /* LDO10_ON_MODE */
+#define WM831X_LDO10_ON_MODE_SHIFT                   8  /* LDO10_ON_MODE */
+#define WM831X_LDO10_ON_MODE_WIDTH                   1  /* LDO10_ON_MODE */
+#define WM831X_LDO10_ON_VSEL_MASK               0x001F  /* LDO10_ON_VSEL - [4:0] */
+#define WM831X_LDO10_ON_VSEL_SHIFT                   0  /* LDO10_ON_VSEL - [4:0] */
+#define WM831X_LDO10_ON_VSEL_WIDTH                   5  /* LDO10_ON_VSEL - [4:0] */
+
+/*
+ * R16517 (0x4085) - LDO10 SLEEP Control
+ */
+#define WM831X_LDO10_SLP_SLOT_MASK              0xE000  /* LDO10_SLP_SLOT - [15:13] */
+#define WM831X_LDO10_SLP_SLOT_SHIFT                 13  /* LDO10_SLP_SLOT - [15:13] */
+#define WM831X_LDO10_SLP_SLOT_WIDTH                  3  /* LDO10_SLP_SLOT - [15:13] */
+#define WM831X_LDO10_SLP_MODE                   0x0100  /* LDO10_SLP_MODE */
+#define WM831X_LDO10_SLP_MODE_MASK              0x0100  /* LDO10_SLP_MODE */
+#define WM831X_LDO10_SLP_MODE_SHIFT                  8  /* LDO10_SLP_MODE */
+#define WM831X_LDO10_SLP_MODE_WIDTH                  1  /* LDO10_SLP_MODE */
+#define WM831X_LDO10_SLP_VSEL_MASK              0x001F  /* LDO10_SLP_VSEL - [4:0] */
+#define WM831X_LDO10_SLP_VSEL_SHIFT                  0  /* LDO10_SLP_VSEL - [4:0] */
+#define WM831X_LDO10_SLP_VSEL_WIDTH                  5  /* LDO10_SLP_VSEL - [4:0] */
+
+/*
+ * R16519 (0x4087) - LDO11 ON Control
+ */
+#define WM831X_LDO11_ON_SLOT_MASK               0xE000  /* LDO11_ON_SLOT - [15:13] */
+#define WM831X_LDO11_ON_SLOT_SHIFT                  13  /* LDO11_ON_SLOT - [15:13] */
+#define WM831X_LDO11_ON_SLOT_WIDTH                   3  /* LDO11_ON_SLOT - [15:13] */
+#define WM831X_LDO11_OFFENA                     0x1000  /* LDO11_OFFENA */
+#define WM831X_LDO11_OFFENA_MASK                0x1000  /* LDO11_OFFENA */
+#define WM831X_LDO11_OFFENA_SHIFT                   12  /* LDO11_OFFENA */
+#define WM831X_LDO11_OFFENA_WIDTH                    1  /* LDO11_OFFENA */
+#define WM831X_LDO11_VSEL_SRC                   0x0080  /* LDO11_VSEL_SRC */
+#define WM831X_LDO11_VSEL_SRC_MASK              0x0080  /* LDO11_VSEL_SRC */
+#define WM831X_LDO11_VSEL_SRC_SHIFT                  7  /* LDO11_VSEL_SRC */
+#define WM831X_LDO11_VSEL_SRC_WIDTH                  1  /* LDO11_VSEL_SRC */
+#define WM831X_LDO11_ON_VSEL_MASK               0x000F  /* LDO11_ON_VSEL - [3:0] */
+#define WM831X_LDO11_ON_VSEL_SHIFT                   0  /* LDO11_ON_VSEL - [3:0] */
+#define WM831X_LDO11_ON_VSEL_WIDTH                   4  /* LDO11_ON_VSEL - [3:0] */
+
+/*
+ * R16520 (0x4088) - LDO11 SLEEP Control
+ */
+#define WM831X_LDO11_SLP_SLOT_MASK              0xE000  /* LDO11_SLP_SLOT - [15:13] */
+#define WM831X_LDO11_SLP_SLOT_SHIFT                 13  /* LDO11_SLP_SLOT - [15:13] */
+#define WM831X_LDO11_SLP_SLOT_WIDTH                  3  /* LDO11_SLP_SLOT - [15:13] */
+#define WM831X_LDO11_SLP_VSEL_MASK              0x000F  /* LDO11_SLP_VSEL - [3:0] */
+#define WM831X_LDO11_SLP_VSEL_SHIFT                  0  /* LDO11_SLP_VSEL - [3:0] */
+#define WM831X_LDO11_SLP_VSEL_WIDTH                  4  /* LDO11_SLP_VSEL - [3:0] */
+
+/*
+ * R16526 (0x408E) - Power Good Source 1
+ */
+#define WM831X_DC4_OK                           0x0008  /* DC4_OK */
+#define WM831X_DC4_OK_MASK                      0x0008  /* DC4_OK */
+#define WM831X_DC4_OK_SHIFT                          3  /* DC4_OK */
+#define WM831X_DC4_OK_WIDTH                          1  /* DC4_OK */
+#define WM831X_DC3_OK                           0x0004  /* DC3_OK */
+#define WM831X_DC3_OK_MASK                      0x0004  /* DC3_OK */
+#define WM831X_DC3_OK_SHIFT                          2  /* DC3_OK */
+#define WM831X_DC3_OK_WIDTH                          1  /* DC3_OK */
+#define WM831X_DC2_OK                           0x0002  /* DC2_OK */
+#define WM831X_DC2_OK_MASK                      0x0002  /* DC2_OK */
+#define WM831X_DC2_OK_SHIFT                          1  /* DC2_OK */
+#define WM831X_DC2_OK_WIDTH                          1  /* DC2_OK */
+#define WM831X_DC1_OK                           0x0001  /* DC1_OK */
+#define WM831X_DC1_OK_MASK                      0x0001  /* DC1_OK */
+#define WM831X_DC1_OK_SHIFT                          0  /* DC1_OK */
+#define WM831X_DC1_OK_WIDTH                          1  /* DC1_OK */
+
+/*
+ * R16527 (0x408F) - Power Good Source 2
+ */
+#define WM831X_LDO10_OK                         0x0200  /* LDO10_OK */
+#define WM831X_LDO10_OK_MASK                    0x0200  /* LDO10_OK */
+#define WM831X_LDO10_OK_SHIFT                        9  /* LDO10_OK */
+#define WM831X_LDO10_OK_WIDTH                        1  /* LDO10_OK */
+#define WM831X_LDO9_OK                          0x0100  /* LDO9_OK */
+#define WM831X_LDO9_OK_MASK                     0x0100  /* LDO9_OK */
+#define WM831X_LDO9_OK_SHIFT                         8  /* LDO9_OK */
+#define WM831X_LDO9_OK_WIDTH                         1  /* LDO9_OK */
+#define WM831X_LDO8_OK                          0x0080  /* LDO8_OK */
+#define WM831X_LDO8_OK_MASK                     0x0080  /* LDO8_OK */
+#define WM831X_LDO8_OK_SHIFT                         7  /* LDO8_OK */
+#define WM831X_LDO8_OK_WIDTH                         1  /* LDO8_OK */
+#define WM831X_LDO7_OK                          0x0040  /* LDO7_OK */
+#define WM831X_LDO7_OK_MASK                     0x0040  /* LDO7_OK */
+#define WM831X_LDO7_OK_SHIFT                         6  /* LDO7_OK */
+#define WM831X_LDO7_OK_WIDTH                         1  /* LDO7_OK */
+#define WM831X_LDO6_OK                          0x0020  /* LDO6_OK */
+#define WM831X_LDO6_OK_MASK                     0x0020  /* LDO6_OK */
+#define WM831X_LDO6_OK_SHIFT                         5  /* LDO6_OK */
+#define WM831X_LDO6_OK_WIDTH                         1  /* LDO6_OK */
+#define WM831X_LDO5_OK                          0x0010  /* LDO5_OK */
+#define WM831X_LDO5_OK_MASK                     0x0010  /* LDO5_OK */
+#define WM831X_LDO5_OK_SHIFT                         4  /* LDO5_OK */
+#define WM831X_LDO5_OK_WIDTH                         1  /* LDO5_OK */
+#define WM831X_LDO4_OK                          0x0008  /* LDO4_OK */
+#define WM831X_LDO4_OK_MASK                     0x0008  /* LDO4_OK */
+#define WM831X_LDO4_OK_SHIFT                         3  /* LDO4_OK */
+#define WM831X_LDO4_OK_WIDTH                         1  /* LDO4_OK */
+#define WM831X_LDO3_OK                          0x0004  /* LDO3_OK */
+#define WM831X_LDO3_OK_MASK                     0x0004  /* LDO3_OK */
+#define WM831X_LDO3_OK_SHIFT                         2  /* LDO3_OK */
+#define WM831X_LDO3_OK_WIDTH                         1  /* LDO3_OK */
+#define WM831X_LDO2_OK                          0x0002  /* LDO2_OK */
+#define WM831X_LDO2_OK_MASK                     0x0002  /* LDO2_OK */
+#define WM831X_LDO2_OK_SHIFT                         1  /* LDO2_OK */
+#define WM831X_LDO2_OK_WIDTH                         1  /* LDO2_OK */
+#define WM831X_LDO1_OK                          0x0001  /* LDO1_OK */
+#define WM831X_LDO1_OK_MASK                     0x0001  /* LDO1_OK */
+#define WM831X_LDO1_OK_SHIFT                         0  /* LDO1_OK */
+#define WM831X_LDO1_OK_WIDTH                         1  /* LDO1_OK */
+
+#define WM831X_ISINK_MAX_ISEL 55
+extern int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL + 1];
+
+#endif
diff --git a/include/linux/mfd/wm831x/status.h b/include/linux/mfd/wm831x/status.h
new file mode 100644
index 00000000..6bc090d0
--- /dev/null
+++ b/include/linux/mfd/wm831x/status.h
@@ -0,0 +1,34 @@
+/*
+ * include/linux/mfd/wm831x/status.h -- Status LEDs for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_STATUS_H__
+#define __MFD_WM831X_STATUS_H__
+
+#define WM831X_LED_SRC_MASK                    0xC000  /* LED_SRC - [15:14] */
+#define WM831X_LED_SRC_SHIFT                       14  /* LED_SRC - [15:14] */
+#define WM831X_LED_SRC_WIDTH                        2  /* LED_SRC - [15:14] */
+#define WM831X_LED_MODE_MASK                   0x0300  /* LED_MODE - [9:8] */
+#define WM831X_LED_MODE_SHIFT                       8  /* LED_MODE - [9:8] */
+#define WM831X_LED_MODE_WIDTH                       2  /* LED_MODE - [9:8] */
+#define WM831X_LED_SEQ_LEN_MASK                0x0030  /* LED_SEQ_LEN - [5:4] */
+#define WM831X_LED_SEQ_LEN_SHIFT                    4  /* LED_SEQ_LEN - [5:4] */
+#define WM831X_LED_SEQ_LEN_WIDTH                    2  /* LED_SEQ_LEN - [5:4] */
+#define WM831X_LED_DUR_MASK                    0x000C  /* LED_DUR - [3:2] */
+#define WM831X_LED_DUR_SHIFT                        2  /* LED_DUR - [3:2] */
+#define WM831X_LED_DUR_WIDTH                        2  /* LED_DUR - [3:2] */
+#define WM831X_LED_DUTY_CYC_MASK               0x0003  /* LED_DUTY_CYC - [1:0] */
+#define WM831X_LED_DUTY_CYC_SHIFT                   0  /* LED_DUTY_CYC - [1:0] */
+#define WM831X_LED_DUTY_CYC_WIDTH                   2  /* LED_DUTY_CYC - [1:0] */
+
+#endif
diff --git a/include/linux/mfd/wm831x/watchdog.h b/include/linux/mfd/wm831x/watchdog.h
new file mode 100644
index 00000000..97a99b52
--- /dev/null
+++ b/include/linux/mfd/wm831x/watchdog.h
@@ -0,0 +1,52 @@
+/*
+ * include/linux/mfd/wm831x/watchdog.h -- Watchdog for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_WATCHDOG_H__
+#define __MFD_WM831X_WATCHDOG_H__
+
+
+/*
+ * R16388 (0x4004) - Watchdog
+ */
+#define WM831X_WDOG_ENA                         0x8000  /* WDOG_ENA */
+#define WM831X_WDOG_ENA_MASK                    0x8000  /* WDOG_ENA */
+#define WM831X_WDOG_ENA_SHIFT                       15  /* WDOG_ENA */
+#define WM831X_WDOG_ENA_WIDTH                        1  /* WDOG_ENA */
+#define WM831X_WDOG_DEBUG                       0x4000  /* WDOG_DEBUG */
+#define WM831X_WDOG_DEBUG_MASK                  0x4000  /* WDOG_DEBUG */
+#define WM831X_WDOG_DEBUG_SHIFT                     14  /* WDOG_DEBUG */
+#define WM831X_WDOG_DEBUG_WIDTH                      1  /* WDOG_DEBUG */
+#define WM831X_WDOG_RST_SRC                     0x2000  /* WDOG_RST_SRC */
+#define WM831X_WDOG_RST_SRC_MASK                0x2000  /* WDOG_RST_SRC */
+#define WM831X_WDOG_RST_SRC_SHIFT                   13  /* WDOG_RST_SRC */
+#define WM831X_WDOG_RST_SRC_WIDTH                    1  /* WDOG_RST_SRC */
+#define WM831X_WDOG_SLPENA                      0x1000  /* WDOG_SLPENA */
+#define WM831X_WDOG_SLPENA_MASK                 0x1000  /* WDOG_SLPENA */
+#define WM831X_WDOG_SLPENA_SHIFT                    12  /* WDOG_SLPENA */
+#define WM831X_WDOG_SLPENA_WIDTH                     1  /* WDOG_SLPENA */
+#define WM831X_WDOG_RESET                       0x0800  /* WDOG_RESET */
+#define WM831X_WDOG_RESET_MASK                  0x0800  /* WDOG_RESET */
+#define WM831X_WDOG_RESET_SHIFT                     11  /* WDOG_RESET */
+#define WM831X_WDOG_RESET_WIDTH                      1  /* WDOG_RESET */
+#define WM831X_WDOG_SECACT_MASK                 0x0300  /* WDOG_SECACT - [9:8] */
+#define WM831X_WDOG_SECACT_SHIFT                     8  /* WDOG_SECACT - [9:8] */
+#define WM831X_WDOG_SECACT_WIDTH                     2  /* WDOG_SECACT - [9:8] */
+#define WM831X_WDOG_PRIMACT_MASK                0x0030  /* WDOG_PRIMACT - [5:4] */
+#define WM831X_WDOG_PRIMACT_SHIFT                    4  /* WDOG_PRIMACT - [5:4] */
+#define WM831X_WDOG_PRIMACT_WIDTH                    2  /* WDOG_PRIMACT - [5:4] */
+#define WM831X_WDOG_TO_MASK                     0x0007  /* WDOG_TO - [2:0] */
+#define WM831X_WDOG_TO_SHIFT                         0  /* WDOG_TO - [2:0] */
+#define WM831X_WDOG_TO_WIDTH                         3  /* WDOG_TO - [2:0] */
+
+#endif
diff --git a/include/linux/mfd/wm8350/audio.h b/include/linux/mfd/wm8350/audio.h
new file mode 100644
index 00000000..bd581c6f
--- /dev/null
+++ b/include/linux/mfd/wm8350/audio.h
@@ -0,0 +1,628 @@
+/*
+ * audio.h  --  Audio Driver for Wolfson WM8350 PMIC
+ *
+ * Copyright 2007, 2008 Wolfson Microelectronics PLC
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __LINUX_MFD_WM8350_AUDIO_H_
+#define __LINUX_MFD_WM8350_AUDIO_H_
+
+#include <linux/platform_device.h>
+
+#define WM8350_CLOCK_CONTROL_1                  0x28
+#define WM8350_CLOCK_CONTROL_2                  0x29
+#define WM8350_FLL_CONTROL_1                    0x2A
+#define WM8350_FLL_CONTROL_2                    0x2B
+#define WM8350_FLL_CONTROL_3                    0x2C
+#define WM8350_FLL_CONTROL_4                    0x2D
+#define WM8350_DAC_CONTROL                      0x30
+#define WM8350_DAC_DIGITAL_VOLUME_L             0x32
+#define WM8350_DAC_DIGITAL_VOLUME_R             0x33
+#define WM8350_DAC_LR_RATE                      0x35
+#define WM8350_DAC_CLOCK_CONTROL                0x36
+#define WM8350_DAC_MUTE                         0x3A
+#define WM8350_DAC_MUTE_VOLUME                  0x3B
+#define WM8350_DAC_SIDE                         0x3C
+#define WM8350_ADC_CONTROL                      0x40
+#define WM8350_ADC_DIGITAL_VOLUME_L             0x42
+#define WM8350_ADC_DIGITAL_VOLUME_R             0x43
+#define WM8350_ADC_DIVIDER                      0x44
+#define WM8350_ADC_LR_RATE                      0x46
+#define WM8350_INPUT_CONTROL                    0x48
+#define WM8350_IN3_INPUT_CONTROL                0x49
+#define WM8350_MIC_BIAS_CONTROL                 0x4A
+#define WM8350_OUTPUT_CONTROL                   0x4C
+#define WM8350_JACK_DETECT                      0x4D
+#define WM8350_ANTI_POP_CONTROL                 0x4E
+#define WM8350_LEFT_INPUT_VOLUME                0x50
+#define WM8350_RIGHT_INPUT_VOLUME               0x51
+#define WM8350_LEFT_MIXER_CONTROL               0x58
+#define WM8350_RIGHT_MIXER_CONTROL              0x59
+#define WM8350_OUT3_MIXER_CONTROL               0x5C
+#define WM8350_OUT4_MIXER_CONTROL               0x5D
+#define WM8350_OUTPUT_LEFT_MIXER_VOLUME         0x60
+#define WM8350_OUTPUT_RIGHT_MIXER_VOLUME        0x61
+#define WM8350_INPUT_MIXER_VOLUME_L             0x62
+#define WM8350_INPUT_MIXER_VOLUME_R             0x63
+#define WM8350_INPUT_MIXER_VOLUME               0x64
+#define WM8350_LOUT1_VOLUME                     0x68
+#define WM8350_ROUT1_VOLUME                     0x69
+#define WM8350_LOUT2_VOLUME                     0x6A
+#define WM8350_ROUT2_VOLUME                     0x6B
+#define WM8350_BEEP_VOLUME                      0x6F
+#define WM8350_AI_FORMATING                     0x70
+#define WM8350_ADC_DAC_COMP                     0x71
+#define WM8350_AI_ADC_CONTROL                   0x72
+#define WM8350_AI_DAC_CONTROL                   0x73
+#define WM8350_AIF_TEST                         0x74
+#define WM8350_JACK_PIN_STATUS                  0xE7
+
+/* Bit values for R08 (0x08) */
+#define WM8350_CODEC_ISEL_1_5                   0	/* x1.5 */
+#define WM8350_CODEC_ISEL_1_0                   1	/* x1.0 */
+#define WM8350_CODEC_ISEL_0_75                  2	/* x0.75 */
+#define WM8350_CODEC_ISEL_0_5                   3	/* x0.5 */
+
+#define WM8350_VMID_OFF                         0
+#define WM8350_VMID_300K                        1
+#define WM8350_VMID_50K                         2
+#define WM8350_VMID_5K                          3
+
+/*
+ * R40 (0x28) - Clock Control 1
+ */
+#define WM8350_TOCLK_RATE                       0x4000
+#define WM8350_MCLK_SEL                         0x0800
+#define WM8350_MCLK_DIV_MASK                    0x0100
+#define WM8350_BCLK_DIV_MASK                    0x00F0
+#define WM8350_OPCLK_DIV_MASK                   0x0007
+
+/*
+ * R41 (0x29) - Clock Control 2
+ */
+#define WM8350_LRC_ADC_SEL                      0x8000
+#define WM8350_MCLK_DIR                         0x0001
+
+/*
+ * R42 (0x2A) - FLL Control 1
+ */
+#define WM8350_FLL_DITHER_WIDTH_MASK            0x3000
+#define WM8350_FLL_DITHER_HP                    0x0800
+#define WM8350_FLL_OUTDIV_MASK                  0x0700
+#define WM8350_FLL_RSP_RATE_MASK                0x00F0
+#define WM8350_FLL_RATE_MASK                    0x0007
+
+/*
+ * R43 (0x2B) - FLL Control 2
+ */
+#define WM8350_FLL_RATIO_MASK                   0xF800
+#define WM8350_FLL_N_MASK                       0x03FF
+
+/*
+ * R44 (0x2C) - FLL Control 3
+ */
+#define WM8350_FLL_K_MASK                       0xFFFF
+
+/*
+ * R45 (0x2D) - FLL Control 4
+ */
+#define WM8350_FLL_FRAC                         0x0020
+#define WM8350_FLL_SLOW_LOCK_REF                0x0010
+#define WM8350_FLL_CLK_SRC_MASK                 0x0003
+
+/*
+ * R48 (0x30) - DAC Control
+ */
+#define WM8350_DAC_MONO                         0x2000
+#define WM8350_AIF_LRCLKRATE                    0x1000
+#define WM8350_DEEMP_MASK                       0x0030
+#define WM8350_DACL_DATINV                      0x0002
+#define WM8350_DACR_DATINV                      0x0001
+
+/*
+ * R50 (0x32) - DAC Digital Volume L
+ */
+#define WM8350_DAC_VU                           0x0100
+#define WM8350_DACL_VOL_MASK                    0x00FF
+
+/*
+ * R51 (0x33) - DAC Digital Volume R
+ */
+#define WM8350_DAC_VU                           0x0100
+#define WM8350_DACR_VOL_MASK                    0x00FF
+
+/*
+ * R53 (0x35) - DAC LR Rate
+ */
+#define WM8350_DACLRC_ENA                       0x0800
+#define WM8350_DACLRC_RATE_MASK                 0x07FF
+
+/*
+ * R54 (0x36) - DAC Clock Control
+ */
+#define WM8350_DACCLK_POL                       0x0010
+#define WM8350_DAC_CLKDIV_MASK                  0x0007
+
+/*
+ * R58 (0x3A) - DAC Mute
+ */
+#define WM8350_DAC_MUTE_ENA                     0x4000
+
+/*
+ * R59 (0x3B) - DAC Mute Volume
+ */
+#define WM8350_DAC_MUTEMODE                     0x4000
+#define WM8350_DAC_MUTERATE                     0x2000
+#define WM8350_DAC_SB_FILT                      0x1000
+
+/*
+ * R60 (0x3C) - DAC Side
+ */
+#define WM8350_ADC_TO_DACL_MASK                 0x3000
+#define WM8350_ADC_TO_DACR_MASK                 0x0C00
+
+/*
+ * R64 (0x40) - ADC Control
+ */
+#define WM8350_ADC_HPF_CUT_MASK                 0x0300
+#define WM8350_ADCL_DATINV                      0x0002
+#define WM8350_ADCR_DATINV                      0x0001
+
+/*
+ * R66 (0x42) - ADC Digital Volume L
+ */
+#define WM8350_ADC_VU                           0x0100
+#define WM8350_ADCL_VOL_MASK                    0x00FF
+
+/*
+ * R67 (0x43) - ADC Digital Volume R
+ */
+#define WM8350_ADC_VU                           0x0100
+#define WM8350_ADCR_VOL_MASK                    0x00FF
+
+/*
+ * R68 (0x44) - ADC Divider
+ */
+#define WM8350_ADCL_DAC_SVOL_MASK               0x0F00
+#define WM8350_ADCR_DAC_SVOL_MASK               0x00F0
+#define WM8350_ADCCLK_POL                       0x0008
+#define WM8350_ADC_CLKDIV_MASK                  0x0007
+
+/*
+ * R70 (0x46) - ADC LR Rate
+ */
+#define WM8350_ADCLRC_ENA                       0x0800
+#define WM8350_ADCLRC_RATE_MASK                 0x07FF
+
+/*
+ * R72 (0x48) - Input Control
+ */
+#define WM8350_IN2R_ENA                         0x0400
+#define WM8350_IN1RN_ENA                        0x0200
+#define WM8350_IN1RP_ENA                        0x0100
+#define WM8350_IN2L_ENA                         0x0004
+#define WM8350_IN1LN_ENA                        0x0002
+#define WM8350_IN1LP_ENA                        0x0001
+
+/*
+ * R73 (0x49) - IN3 Input Control
+ */
+#define WM8350_IN3R_SHORT                       0x4000
+#define WM8350_IN3L_SHORT                       0x0040
+
+/*
+ * R74 (0x4A) - Mic Bias Control
+ */
+#define WM8350_MICBSEL                          0x4000
+#define WM8350_MCDTHR_MASK                      0x001C
+#define WM8350_MCDSCTHR_MASK                    0x0003
+
+/*
+ * R76 (0x4C) - Output Control
+ */
+#define WM8350_OUT4_VROI                        0x0800
+#define WM8350_OUT3_VROI                        0x0400
+#define WM8350_OUT2_VROI                        0x0200
+#define WM8350_OUT1_VROI                        0x0100
+#define WM8350_OUT2_FB                          0x0004
+#define WM8350_OUT1_FB                          0x0001
+
+/*
+ * R77 (0x4D) - Jack Detect
+ */
+#define WM8350_JDL_ENA                          0x8000
+#define WM8350_JDR_ENA                          0x4000
+
+/*
+ * R78 (0x4E) - Anti Pop Control
+ */
+#define WM8350_ANTI_POP_MASK                    0x0300
+#define WM8350_DIS_OP_LN4_MASK                  0x00C0
+#define WM8350_DIS_OP_LN3_MASK                  0x0030
+#define WM8350_DIS_OP_OUT2_MASK                 0x000C
+#define WM8350_DIS_OP_OUT1_MASK                 0x0003
+
+/*
+ * R80 (0x50) - Left Input Volume
+ */
+#define WM8350_INL_MUTE                         0x4000
+#define WM8350_INL_ZC                           0x2000
+#define WM8350_IN_VU                            0x0100
+#define WM8350_INL_VOL_MASK                     0x00FC
+
+/*
+ * R81 (0x51) - Right Input Volume
+ */
+#define WM8350_INR_MUTE                         0x4000
+#define WM8350_INR_ZC                           0x2000
+#define WM8350_IN_VU                            0x0100
+#define WM8350_INR_VOL_MASK                     0x00FC
+
+/*
+ * R88 (0x58) - Left Mixer Control
+ */
+#define WM8350_DACR_TO_MIXOUTL                  0x1000
+#define WM8350_DACL_TO_MIXOUTL                  0x0800
+#define WM8350_IN3L_TO_MIXOUTL                  0x0004
+#define WM8350_INR_TO_MIXOUTL                   0x0002
+#define WM8350_INL_TO_MIXOUTL                   0x0001
+
+/*
+ * R89 (0x59) - Right Mixer Control
+ */
+#define WM8350_DACR_TO_MIXOUTR                  0x1000
+#define WM8350_DACL_TO_MIXOUTR                  0x0800
+#define WM8350_IN3R_TO_MIXOUTR                  0x0008
+#define WM8350_INR_TO_MIXOUTR                   0x0002
+#define WM8350_INL_TO_MIXOUTR                   0x0001
+
+/*
+ * R92 (0x5C) - OUT3 Mixer Control
+ */
+#define WM8350_DACL_TO_OUT3                     0x0800
+#define WM8350_MIXINL_TO_OUT3                   0x0100
+#define WM8350_OUT4_TO_OUT3                     0x0008
+#define WM8350_MIXOUTL_TO_OUT3                  0x0001
+
+/*
+ * R93 (0x5D) - OUT4 Mixer Control
+ */
+#define WM8350_DACR_TO_OUT4                     0x1000
+#define WM8350_DACL_TO_OUT4                     0x0800
+#define WM8350_OUT4_ATTN                        0x0400
+#define WM8350_MIXINR_TO_OUT4                   0x0200
+#define WM8350_OUT3_TO_OUT4                     0x0004
+#define WM8350_MIXOUTR_TO_OUT4                  0x0002
+#define WM8350_MIXOUTL_TO_OUT4                  0x0001
+
+/*
+ * R96 (0x60) - Output Left Mixer Volume
+ */
+#define WM8350_IN3L_MIXOUTL_VOL_MASK            0x0E00
+#define WM8350_IN3L_MIXOUTL_VOL_SHIFT                9
+#define WM8350_INR_MIXOUTL_VOL_MASK             0x00E0
+#define WM8350_INR_MIXOUTL_VOL_SHIFT                 5
+#define WM8350_INL_MIXOUTL_VOL_MASK             0x000E
+#define WM8350_INL_MIXOUTL_VOL_SHIFT                 1
+
+/* Bit values for R96 (0x60) */
+#define WM8350_IN3L_MIXOUTL_VOL_OFF                  0
+#define WM8350_IN3L_MIXOUTL_VOL_M12DB                1
+#define WM8350_IN3L_MIXOUTL_VOL_M9DB                 2
+#define WM8350_IN3L_MIXOUTL_VOL_M6DB                 3
+#define WM8350_IN3L_MIXOUTL_VOL_M3DB                 4
+#define WM8350_IN3L_MIXOUTL_VOL_0DB                  5
+#define WM8350_IN3L_MIXOUTL_VOL_3DB                  6
+#define WM8350_IN3L_MIXOUTL_VOL_6DB                  7
+
+#define WM8350_INR_MIXOUTL_VOL_OFF                   0
+#define WM8350_INR_MIXOUTL_VOL_M12DB                 1
+#define WM8350_INR_MIXOUTL_VOL_M9DB                  2
+#define WM8350_INR_MIXOUTL_VOL_M6DB                  3
+#define WM8350_INR_MIXOUTL_VOL_M3DB                  4
+#define WM8350_INR_MIXOUTL_VOL_0DB                   5
+#define WM8350_INR_MIXOUTL_VOL_3DB                   6
+#define WM8350_INR_MIXOUTL_VOL_6DB                   7
+
+#define WM8350_INL_MIXOUTL_VOL_OFF                   0
+#define WM8350_INL_MIXOUTL_VOL_M12DB                 1
+#define WM8350_INL_MIXOUTL_VOL_M9DB                  2
+#define WM8350_INL_MIXOUTL_VOL_M6DB                  3
+#define WM8350_INL_MIXOUTL_VOL_M3DB                  4
+#define WM8350_INL_MIXOUTL_VOL_0DB                   5
+#define WM8350_INL_MIXOUTL_VOL_3DB                   6
+#define WM8350_INL_MIXOUTL_VOL_6DB                   7
+
+/*
+ * R97 (0x61) - Output Right Mixer Volume
+ */
+#define WM8350_IN3R_MIXOUTR_VOL_MASK            0xE000
+#define WM8350_IN3R_MIXOUTR_VOL_SHIFT               13
+#define WM8350_INR_MIXOUTR_VOL_MASK             0x00E0
+#define WM8350_INR_MIXOUTR_VOL_SHIFT                 5
+#define WM8350_INL_MIXOUTR_VOL_MASK             0x000E
+#define WM8350_INL_MIXOUTR_VOL_SHIFT                 1
+
+/* Bit values for R96 (0x60) */
+#define WM8350_IN3R_MIXOUTR_VOL_OFF                  0
+#define WM8350_IN3R_MIXOUTR_VOL_M12DB                1
+#define WM8350_IN3R_MIXOUTR_VOL_M9DB                 2
+#define WM8350_IN3R_MIXOUTR_VOL_M6DB                 3
+#define WM8350_IN3R_MIXOUTR_VOL_M3DB                 4
+#define WM8350_IN3R_MIXOUTR_VOL_0DB                  5
+#define WM8350_IN3R_MIXOUTR_VOL_3DB                  6
+#define WM8350_IN3R_MIXOUTR_VOL_6DB                  7
+
+#define WM8350_INR_MIXOUTR_VOL_OFF                   0
+#define WM8350_INR_MIXOUTR_VOL_M12DB                 1
+#define WM8350_INR_MIXOUTR_VOL_M9DB                  2
+#define WM8350_INR_MIXOUTR_VOL_M6DB                  3
+#define WM8350_INR_MIXOUTR_VOL_M3DB                  4
+#define WM8350_INR_MIXOUTR_VOL_0DB                   5
+#define WM8350_INR_MIXOUTR_VOL_3DB                   6
+#define WM8350_INR_MIXOUTR_VOL_6DB                   7
+
+#define WM8350_INL_MIXOUTR_VOL_OFF                   0
+#define WM8350_INL_MIXOUTR_VOL_M12DB                 1
+#define WM8350_INL_MIXOUTR_VOL_M9DB                  2
+#define WM8350_INL_MIXOUTR_VOL_M6DB                  3
+#define WM8350_INL_MIXOUTR_VOL_M3DB                  4
+#define WM8350_INL_MIXOUTR_VOL_0DB                   5
+#define WM8350_INL_MIXOUTR_VOL_3DB                   6
+#define WM8350_INL_MIXOUTR_VOL_6DB                   7
+
+/*
+ * R98 (0x62) - Input Mixer Volume L
+ */
+#define WM8350_IN3L_MIXINL_VOL_MASK             0x0E00
+#define WM8350_IN2L_MIXINL_VOL_MASK             0x000E
+#define WM8350_INL_MIXINL_VOL                   0x0001
+
+/*
+ * R99 (0x63) - Input Mixer Volume R
+ */
+#define WM8350_IN3R_MIXINR_VOL_MASK             0xE000
+#define WM8350_IN2R_MIXINR_VOL_MASK             0x00E0
+#define WM8350_INR_MIXINR_VOL                   0x0001
+
+/*
+ * R100 (0x64) - Input Mixer Volume
+ */
+#define WM8350_OUT4_MIXIN_DST                   0x8000
+#define WM8350_OUT4_MIXIN_VOL_MASK              0x000E
+
+/*
+ * R104 (0x68) - LOUT1 Volume
+ */
+#define WM8350_OUT1L_MUTE                       0x4000
+#define WM8350_OUT1L_ZC                         0x2000
+#define WM8350_OUT1_VU                          0x0100
+#define WM8350_OUT1L_VOL_MASK                   0x00FC
+#define WM8350_OUT1L_VOL_SHIFT                       2
+
+/*
+ * R105 (0x69) - ROUT1 Volume
+ */
+#define WM8350_OUT1R_MUTE                       0x4000
+#define WM8350_OUT1R_ZC                         0x2000
+#define WM8350_OUT1_VU                          0x0100
+#define WM8350_OUT1R_VOL_MASK                   0x00FC
+#define WM8350_OUT1R_VOL_SHIFT                       2
+
+/*
+ * R106 (0x6A) - LOUT2 Volume
+ */
+#define WM8350_OUT2L_MUTE                       0x4000
+#define WM8350_OUT2L_ZC                         0x2000
+#define WM8350_OUT2_VU                          0x0100
+#define WM8350_OUT2L_VOL_MASK                   0x00FC
+
+/*
+ * R107 (0x6B) - ROUT2 Volume
+ */
+#define WM8350_OUT2R_MUTE                       0x4000
+#define WM8350_OUT2R_ZC                         0x2000
+#define WM8350_OUT2R_INV                        0x0400
+#define WM8350_OUT2R_INV_MUTE                   0x0200
+#define WM8350_OUT2_VU                          0x0100
+#define WM8350_OUT2R_VOL_MASK                   0x00FC
+
+/*
+ * R111 (0x6F) - BEEP Volume
+ */
+#define WM8350_IN3R_OUT2R_VOL_MASK              0x00E0
+
+/*
+ * R112 (0x70) - AI Formating
+ */
+#define WM8350_AIF_BCLK_INV                     0x8000
+#define WM8350_AIF_TRI                          0x2000
+#define WM8350_AIF_LRCLK_INV                    0x1000
+#define WM8350_AIF_WL_MASK                      0x0C00
+#define WM8350_AIF_FMT_MASK                     0x0300
+
+/*
+ * R113 (0x71) - ADC DAC COMP
+ */
+#define WM8350_DAC_COMP                         0x0080
+#define WM8350_DAC_COMPMODE                     0x0040
+#define WM8350_ADC_COMP                         0x0020
+#define WM8350_ADC_COMPMODE                     0x0010
+#define WM8350_LOOPBACK                         0x0001
+
+/*
+ * R114 (0x72) - AI ADC Control
+ */
+#define WM8350_AIFADC_PD                        0x0080
+#define WM8350_AIFADCL_SRC                      0x0040
+#define WM8350_AIFADCR_SRC                      0x0020
+#define WM8350_AIFADC_TDM_CHAN                  0x0010
+#define WM8350_AIFADC_TDM                       0x0008
+
+/*
+ * R115 (0x73) - AI DAC Control
+ */
+#define WM8350_BCLK_MSTR                        0x4000
+#define WM8350_AIFDAC_PD                        0x0080
+#define WM8350_DACL_SRC                         0x0040
+#define WM8350_DACR_SRC                         0x0020
+#define WM8350_AIFDAC_TDM_CHAN                  0x0010
+#define WM8350_AIFDAC_TDM                       0x0008
+#define WM8350_DAC_BOOST_MASK                   0x0003
+
+/*
+ * R116 (0x74) - AIF Test
+ */
+#define WM8350_CODEC_BYP                        0x4000
+#define WM8350_AIFADC_WR_TST                    0x2000
+#define WM8350_AIFADC_RD_TST                    0x1000
+#define WM8350_AIFDAC_WR_TST                    0x0800
+#define WM8350_AIFDAC_RD_TST                    0x0400
+#define WM8350_AIFADC_ASYN                      0x0020
+#define WM8350_AIFDAC_ASYN                      0x0010
+
+/*
+ * R231 (0xE7) - Jack Status
+ */
+#define WM8350_JACK_L_LVL			0x0800
+#define WM8350_JACK_R_LVL                       0x0400
+#define WM8350_JACK_MICSCD_LVL			0x0200
+#define WM8350_JACK_MICSD_LVL			0x0100
+
+/*
+ * WM8350 Platform setup
+ */
+#define WM8350_S_CURVE_NONE			0x0
+#define WM8350_S_CURVE_FAST			0x1
+#define WM8350_S_CURVE_MEDIUM			0x2
+#define WM8350_S_CURVE_SLOW			0x3
+
+#define WM8350_DISCHARGE_OFF			0x0
+#define WM8350_DISCHARGE_FAST			0x1
+#define WM8350_DISCHARGE_MEDIUM			0x2
+#define WM8350_DISCHARGE_SLOW			0x3
+
+#define WM8350_TIE_OFF_500R			0x0
+#define WM8350_TIE_OFF_30K			0x1
+
+/*
+ * Clock sources & directions
+ */
+#define WM8350_SYSCLK				0
+
+#define WM8350_MCLK_SEL_PLL_MCLK		0
+#define WM8350_MCLK_SEL_PLL_DAC			1
+#define WM8350_MCLK_SEL_PLL_ADC			2
+#define WM8350_MCLK_SEL_PLL_32K			3
+#define WM8350_MCLK_SEL_MCLK			5
+
+/* clock divider id's */
+#define WM8350_ADC_CLKDIV			0
+#define WM8350_DAC_CLKDIV			1
+#define WM8350_BCLK_CLKDIV			2
+#define WM8350_OPCLK_CLKDIV			3
+#define WM8350_TO_CLKDIV			4
+#define WM8350_SYS_CLKDIV			5
+#define WM8350_DACLR_CLKDIV			6
+#define WM8350_ADCLR_CLKDIV			7
+
+/* ADC clock dividers */
+#define WM8350_ADCDIV_1				0x0
+#define WM8350_ADCDIV_1_5			0x1
+#define WM8350_ADCDIV_2				0x2
+#define WM8350_ADCDIV_3				0x3
+#define WM8350_ADCDIV_4				0x4
+#define WM8350_ADCDIV_5_5			0x5
+#define WM8350_ADCDIV_6				0x6
+
+/* ADC clock dividers */
+#define WM8350_DACDIV_1				0x0
+#define WM8350_DACDIV_1_5			0x1
+#define WM8350_DACDIV_2				0x2
+#define WM8350_DACDIV_3				0x3
+#define WM8350_DACDIV_4				0x4
+#define WM8350_DACDIV_5_5			0x5
+#define WM8350_DACDIV_6				0x6
+
+/* BCLK clock dividers */
+#define WM8350_BCLK_DIV_1			(0x0 << 4)
+#define WM8350_BCLK_DIV_1_5			(0x1 << 4)
+#define WM8350_BCLK_DIV_2			(0x2 << 4)
+#define WM8350_BCLK_DIV_3			(0x3 << 4)
+#define WM8350_BCLK_DIV_4			(0x4 << 4)
+#define WM8350_BCLK_DIV_5_5			(0x5 << 4)
+#define WM8350_BCLK_DIV_6			(0x6 << 4)
+#define WM8350_BCLK_DIV_8			(0x7 << 4)
+#define WM8350_BCLK_DIV_11			(0x8 << 4)
+#define WM8350_BCLK_DIV_12			(0x9 << 4)
+#define WM8350_BCLK_DIV_16			(0xa << 4)
+#define WM8350_BCLK_DIV_22			(0xb << 4)
+#define WM8350_BCLK_DIV_24			(0xc << 4)
+#define WM8350_BCLK_DIV_32			(0xd << 4)
+#define WM8350_BCLK_DIV_44			(0xe << 4)
+#define WM8350_BCLK_DIV_48			(0xf << 4)
+
+/* Sys (MCLK) clock dividers */
+#define WM8350_MCLK_DIV_1			(0x0 << 8)
+#define WM8350_MCLK_DIV_2			(0x1 << 8)
+
+/* OP clock dividers */
+#define WM8350_OPCLK_DIV_1			0x0
+#define WM8350_OPCLK_DIV_2			0x1
+#define WM8350_OPCLK_DIV_3			0x2
+#define WM8350_OPCLK_DIV_4			0x3
+#define WM8350_OPCLK_DIV_5_5			0x4
+#define WM8350_OPCLK_DIV_6			0x5
+
+/* DAI ID */
+#define WM8350_HIFI_DAI				0
+
+/*
+ * Audio interrupts.
+ */
+#define WM8350_IRQ_CODEC_JCK_DET_L		39
+#define WM8350_IRQ_CODEC_JCK_DET_R		40
+#define WM8350_IRQ_CODEC_MICSCD			41
+#define WM8350_IRQ_CODEC_MICD			42
+
+/*
+ * WM8350 Platform data.
+ *
+ * This must be initialised per platform for best audio performance.
+ * Please see WM8350 datasheet for information.
+ */
+struct wm8350_audio_platform_data {
+	int vmid_discharge_msecs;	/* VMID --> OFF discharge time */
+	int drain_msecs;	/* OFF drain time */
+	int cap_discharge_msecs;	/* Cap ON (from OFF) discharge time */
+	int vmid_charge_msecs;	/* vmid power up time */
+	u32 vmid_s_curve:2;	/* vmid enable s curve speed */
+	u32 dis_out4:2;		/* out4 discharge speed */
+	u32 dis_out3:2;		/* out3 discharge speed */
+	u32 dis_out2:2;		/* out2 discharge speed */
+	u32 dis_out1:2;		/* out1 discharge speed */
+	u32 vroi_out4:1;	/* out4 tie off */
+	u32 vroi_out3:1;	/* out3 tie off */
+	u32 vroi_out2:1;	/* out2 tie off */
+	u32 vroi_out1:1;	/* out1 tie off */
+	u32 vroi_enable:1;	/* enable tie off */
+	u32 codec_current_on:2;	/* current level ON */
+	u32 codec_current_standby:2;	/* current level STANDBY */
+	u32 codec_current_charge:2;	/* codec current @ vmid charge */
+};
+
+struct snd_soc_codec;
+
+struct wm8350_codec {
+	struct platform_device *pdev;
+	struct snd_soc_codec *codec;
+	struct wm8350_audio_platform_data *platform_data;
+};
+
+#endif
diff --git a/include/linux/mfd/wm8350/comparator.h b/include/linux/mfd/wm8350/comparator.h
new file mode 100644
index 00000000..54bc5d0f
--- /dev/null
+++ b/include/linux/mfd/wm8350/comparator.h
@@ -0,0 +1,175 @@
+/*
+ * comparator.h  --  Comparator Aux ADC for Wolfson WM8350 PMIC
+ *
+ * Copyright 2007 Wolfson Microelectronics PLC
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef __LINUX_MFD_WM8350_COMPARATOR_H_
+#define __LINUX_MFD_WM8350_COMPARATOR_H_
+
+/*
+ * Registers
+ */
+
+#define WM8350_DIGITISER_CONTROL_1              0x90
+#define WM8350_DIGITISER_CONTROL_2              0x91
+#define WM8350_AUX1_READBACK                    0x98
+#define WM8350_AUX2_READBACK                    0x99
+#define WM8350_AUX3_READBACK                    0x9A
+#define WM8350_AUX4_READBACK                    0x9B
+#define WM8350_CHIP_TEMP_READBACK               0x9F
+#define WM8350_GENERIC_COMPARATOR_CONTROL       0xA3
+#define WM8350_GENERIC_COMPARATOR_1             0xA4
+#define WM8350_GENERIC_COMPARATOR_2             0xA5
+#define WM8350_GENERIC_COMPARATOR_3             0xA6
+#define WM8350_GENERIC_COMPARATOR_4             0xA7
+
+/*
+ * R144 (0x90) - Digitiser Control (1)
+ */
+#define WM8350_AUXADC_CTC                       0x4000
+#define WM8350_AUXADC_POLL                      0x2000
+#define WM8350_AUXADC_HIB_MODE                  0x1000
+#define WM8350_AUXADC_SEL8                      0x0080
+#define WM8350_AUXADC_SEL7                      0x0040
+#define WM8350_AUXADC_SEL6                      0x0020
+#define WM8350_AUXADC_SEL5                      0x0010
+#define WM8350_AUXADC_SEL4                      0x0008
+#define WM8350_AUXADC_SEL3                      0x0004
+#define WM8350_AUXADC_SEL2                      0x0002
+#define WM8350_AUXADC_SEL1                      0x0001
+
+/*
+ * R145 (0x91) - Digitiser Control (2)
+ */
+#define WM8350_AUXADC_MASKMODE_MASK             0x3000
+#define WM8350_AUXADC_CRATE_MASK                0x0700
+#define WM8350_AUXADC_CAL                       0x0004
+#define WM8350_AUX_RBMODE                       0x0002
+#define WM8350_AUXADC_WAIT                      0x0001
+
+/*
+ * R152 (0x98) - AUX1 Readback
+ */
+#define WM8350_AUXADC_SCALE1_MASK               0x6000
+#define WM8350_AUXADC_REF1                      0x1000
+#define WM8350_AUXADC_DATA1_MASK                0x0FFF
+
+/*
+ * R153 (0x99) - AUX2 Readback
+ */
+#define WM8350_AUXADC_SCALE2_MASK               0x6000
+#define WM8350_AUXADC_REF2                      0x1000
+#define WM8350_AUXADC_DATA2_MASK                0x0FFF
+
+/*
+ * R154 (0x9A) - AUX3 Readback
+ */
+#define WM8350_AUXADC_SCALE3_MASK               0x6000
+#define WM8350_AUXADC_REF3                      0x1000
+#define WM8350_AUXADC_DATA3_MASK                0x0FFF
+
+/*
+ * R155 (0x9B) - AUX4 Readback
+ */
+#define WM8350_AUXADC_SCALE4_MASK               0x6000
+#define WM8350_AUXADC_REF4                      0x1000
+#define WM8350_AUXADC_DATA4_MASK                0x0FFF
+
+/*
+ * R156 (0x9C) - USB Voltage Readback
+ */
+#define WM8350_AUXADC_DATA_USB_MASK             0x0FFF
+
+/*
+ * R157 (0x9D) - LINE Voltage Readback
+ */
+#define WM8350_AUXADC_DATA_LINE_MASK            0x0FFF
+
+/*
+ * R158 (0x9E) - BATT Voltage Readback
+ */
+#define WM8350_AUXADC_DATA_BATT_MASK            0x0FFF
+
+/*
+ * R159 (0x9F) - Chip Temp Readback
+ */
+#define WM8350_AUXADC_DATA_CHIPTEMP_MASK        0x0FFF
+
+/*
+ * R163 (0xA3) - Generic Comparator Control
+ */
+#define WM8350_DCMP4_ENA                        0x0008
+#define WM8350_DCMP3_ENA                        0x0004
+#define WM8350_DCMP2_ENA                        0x0002
+#define WM8350_DCMP1_ENA                        0x0001
+
+/*
+ * R164 (0xA4) - Generic comparator 1
+ */
+#define WM8350_DCMP1_SRCSEL_MASK                0xE000
+#define WM8350_DCMP1_GT                         0x1000
+#define WM8350_DCMP1_THR_MASK                   0x0FFF
+
+/*
+ * R165 (0xA5) - Generic comparator 2
+ */
+#define WM8350_DCMP2_SRCSEL_MASK                0xE000
+#define WM8350_DCMP2_GT                         0x1000
+#define WM8350_DCMP2_THR_MASK                   0x0FFF
+
+/*
+ * R166 (0xA6) - Generic comparator 3
+ */
+#define WM8350_DCMP3_SRCSEL_MASK                0xE000
+#define WM8350_DCMP3_GT                         0x1000
+#define WM8350_DCMP3_THR_MASK                   0x0FFF
+
+/*
+ * R167 (0xA7) - Generic comparator 4
+ */
+#define WM8350_DCMP4_SRCSEL_MASK                0xE000
+#define WM8350_DCMP4_GT                         0x1000
+#define WM8350_DCMP4_THR_MASK                   0x0FFF
+
+/*
+ * Interrupts.
+ */
+#define WM8350_IRQ_AUXADC_DATARDY		16
+#define WM8350_IRQ_AUXADC_DCOMP4		17
+#define WM8350_IRQ_AUXADC_DCOMP3		18
+#define WM8350_IRQ_AUXADC_DCOMP2		19
+#define WM8350_IRQ_AUXADC_DCOMP1		20
+#define WM8350_IRQ_SYS_HYST_COMP_FAIL		21
+#define WM8350_IRQ_SYS_CHIP_GT115		22
+#define WM8350_IRQ_SYS_CHIP_GT140		23
+
+/*
+ * USB/2, LINE & BATT = ((VRTC * 2) / 4095)) * 10e6 uV
+ * Where VRTC = 2.7 V
+ */
+#define WM8350_AUX_COEFF			1319
+
+#define WM8350_AUXADC_AUX1			0
+#define WM8350_AUXADC_AUX2			1
+#define WM8350_AUXADC_AUX3			2
+#define WM8350_AUXADC_AUX4			3
+#define WM8350_AUXADC_USB			4
+#define WM8350_AUXADC_LINE			5
+#define WM8350_AUXADC_BATT			6
+#define WM8350_AUXADC_TEMP			7
+
+struct wm8350;
+
+/*
+ * AUX ADC Readback
+ */
+int wm8350_read_auxadc(struct wm8350 *wm8350, int channel, int scale,
+		       int vref);
+
+#endif
diff --git a/include/linux/mfd/wm8350/core.h b/include/linux/mfd/wm8350/core.h
new file mode 100644
index 00000000..98fcc977
--- /dev/null
+++ b/include/linux/mfd/wm8350/core.h
@@ -0,0 +1,713 @@
+/*
+ * core.h  --  Core Driver for Wolfson WM8350 PMIC
+ *
+ * Copyright 2007 Wolfson Microelectronics PLC
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __LINUX_MFD_WM8350_CORE_H_
+#define __LINUX_MFD_WM8350_CORE_H_
+
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/completion.h>
+
+#include <linux/mfd/wm8350/audio.h>
+#include <linux/mfd/wm8350/gpio.h>
+#include <linux/mfd/wm8350/pmic.h>
+#include <linux/mfd/wm8350/rtc.h>
+#include <linux/mfd/wm8350/supply.h>
+#include <linux/mfd/wm8350/wdt.h>
+
+/*
+ * Register values.
+ */
+#define WM8350_RESET_ID                         0x00
+#define WM8350_ID                               0x01
+#define WM8350_REVISION				0x02
+#define WM8350_SYSTEM_CONTROL_1                 0x03
+#define WM8350_SYSTEM_CONTROL_2                 0x04
+#define WM8350_SYSTEM_HIBERNATE                 0x05
+#define WM8350_INTERFACE_CONTROL                0x06
+#define WM8350_POWER_MGMT_1                     0x08
+#define WM8350_POWER_MGMT_2                     0x09
+#define WM8350_POWER_MGMT_3                     0x0A
+#define WM8350_POWER_MGMT_4                     0x0B
+#define WM8350_POWER_MGMT_5                     0x0C
+#define WM8350_POWER_MGMT_6                     0x0D
+#define WM8350_POWER_MGMT_7                     0x0E
+
+#define WM8350_SYSTEM_INTERRUPTS                0x18
+#define WM8350_INT_STATUS_1                     0x19
+#define WM8350_INT_STATUS_2                     0x1A
+#define WM8350_POWER_UP_INT_STATUS              0x1B
+#define WM8350_UNDER_VOLTAGE_INT_STATUS         0x1C
+#define WM8350_OVER_CURRENT_INT_STATUS          0x1D
+#define WM8350_GPIO_INT_STATUS                  0x1E
+#define WM8350_COMPARATOR_INT_STATUS            0x1F
+#define WM8350_SYSTEM_INTERRUPTS_MASK           0x20
+#define WM8350_INT_STATUS_1_MASK                0x21
+#define WM8350_INT_STATUS_2_MASK                0x22
+#define WM8350_POWER_UP_INT_STATUS_MASK         0x23
+#define WM8350_UNDER_VOLTAGE_INT_STATUS_MASK    0x24
+#define WM8350_OVER_CURRENT_INT_STATUS_MASK     0x25
+#define WM8350_GPIO_INT_STATUS_MASK             0x26
+#define WM8350_COMPARATOR_INT_STATUS_MASK       0x27
+#define WM8350_CHARGER_OVERRIDES		0xE2
+#define WM8350_MISC_OVERRIDES			0xE3
+#define WM8350_COMPARATOR_OVERRIDES		0xE7
+#define WM8350_STATE_MACHINE_STATUS		0xE9
+
+#define WM8350_MAX_REGISTER                     0xFF
+
+/*
+ * Field Definitions.
+ */
+
+/*
+ * R0 (0x00) - Reset/ID
+ */
+#define WM8350_SW_RESET_CHIP_ID_MASK            0xFFFF
+
+/*
+ * R1 (0x01) - ID
+ */
+#define WM8350_CHIP_REV_MASK                    0x7000
+#define WM8350_CONF_STS_MASK                    0x0C00
+#define WM8350_CUST_ID_MASK                     0x00FF
+
+/*
+ * R2 (0x02) - Revision
+ */
+#define WM8350_MASK_REV_MASK			0x00FF
+
+/*
+ * R3 (0x03) - System Control 1
+ */
+#define WM8350_CHIP_ON                          0x8000
+#define WM8350_POWERCYCLE                       0x2000
+#define WM8350_VCC_FAULT_OV                     0x1000
+#define WM8350_REG_RSTB_TIME_MASK               0x0C00
+#define WM8350_BG_SLEEP                         0x0200
+#define WM8350_MEM_VALID                        0x0020
+#define WM8350_CHIP_SET_UP                      0x0010
+#define WM8350_ON_DEB_T                         0x0008
+#define WM8350_ON_POL                           0x0002
+#define WM8350_IRQ_POL                          0x0001
+
+/*
+ * R4 (0x04) - System Control 2
+ */
+#define WM8350_USB_SUSPEND_8MA                  0x8000
+#define WM8350_USB_SUSPEND                      0x4000
+#define WM8350_USB_MSTR                         0x2000
+#define WM8350_USB_MSTR_SRC                     0x1000
+#define WM8350_USB_500MA                        0x0800
+#define WM8350_USB_NOLIM                        0x0400
+
+/*
+ * R5 (0x05) - System Hibernate
+ */
+#define WM8350_HIBERNATE                        0x8000
+#define WM8350_WDOG_HIB_MODE                    0x0080
+#define WM8350_REG_HIB_STARTUP_SEQ              0x0040
+#define WM8350_REG_RESET_HIB_MODE               0x0020
+#define WM8350_RST_HIB_MODE                     0x0010
+#define WM8350_IRQ_HIB_MODE                     0x0008
+#define WM8350_MEMRST_HIB_MODE                  0x0004
+#define WM8350_PCCOMP_HIB_MODE                  0x0002
+#define WM8350_TEMPMON_HIB_MODE                 0x0001
+
+/*
+ * R6 (0x06) - Interface Control
+ */
+#define WM8350_USE_DEV_PINS                     0x8000
+#define WM8350_USE_DEV_PINS_MASK                0x8000
+#define WM8350_USE_DEV_PINS_SHIFT                   15
+#define WM8350_DEV_ADDR_MASK                    0x6000
+#define WM8350_DEV_ADDR_SHIFT                       13
+#define WM8350_CONFIG_DONE                      0x1000
+#define WM8350_CONFIG_DONE_MASK                 0x1000
+#define WM8350_CONFIG_DONE_SHIFT                    12
+#define WM8350_RECONFIG_AT_ON                   0x0800
+#define WM8350_RECONFIG_AT_ON_MASK              0x0800
+#define WM8350_RECONFIG_AT_ON_SHIFT                 11
+#define WM8350_AUTOINC                          0x0200
+#define WM8350_AUTOINC_MASK                     0x0200
+#define WM8350_AUTOINC_SHIFT                         9
+#define WM8350_ARA                              0x0100
+#define WM8350_ARA_MASK                         0x0100
+#define WM8350_ARA_SHIFT                             8
+#define WM8350_SPI_CFG                          0x0008
+#define WM8350_SPI_CFG_MASK                     0x0008
+#define WM8350_SPI_CFG_SHIFT                         3
+#define WM8350_SPI_4WIRE                        0x0004
+#define WM8350_SPI_4WIRE_MASK                   0x0004
+#define WM8350_SPI_4WIRE_SHIFT                       2
+#define WM8350_SPI_3WIRE                        0x0002
+#define WM8350_SPI_3WIRE_MASK                   0x0002
+#define WM8350_SPI_3WIRE_SHIFT                       1
+
+/* Bit values for R06 (0x06) */
+#define WM8350_USE_DEV_PINS_PRIMARY                  0
+#define WM8350_USE_DEV_PINS_DEV                      1
+
+#define WM8350_DEV_ADDR_34                           0
+#define WM8350_DEV_ADDR_36                           1
+#define WM8350_DEV_ADDR_3C                           2
+#define WM8350_DEV_ADDR_3E                           3
+
+#define WM8350_CONFIG_DONE_OFF                       0
+#define WM8350_CONFIG_DONE_DONE                      1
+
+#define WM8350_RECONFIG_AT_ON_OFF                    0
+#define WM8350_RECONFIG_AT_ON_ON                     1
+
+#define WM8350_AUTOINC_OFF                           0
+#define WM8350_AUTOINC_ON                            1
+
+#define WM8350_ARA_OFF                               0
+#define WM8350_ARA_ON                                1
+
+#define WM8350_SPI_CFG_CMOS                          0
+#define WM8350_SPI_CFG_OD                            1
+
+#define WM8350_SPI_4WIRE_3WIRE                       0
+#define WM8350_SPI_4WIRE_4WIRE                       1
+
+#define WM8350_SPI_3WIRE_I2C                         0
+#define WM8350_SPI_3WIRE_SPI                         1
+
+/*
+ * R8 (0x08) - Power mgmt (1)
+ */
+#define WM8350_CODEC_ISEL_MASK                  0xC000
+#define WM8350_VBUFEN                           0x2000
+#define WM8350_OUTPUT_DRAIN_EN                  0x0400
+#define WM8350_MIC_DET_ENA                      0x0100
+#define WM8350_BIASEN                           0x0020
+#define WM8350_MICBEN                           0x0010
+#define WM8350_VMIDEN                           0x0004
+#define WM8350_VMID_MASK                        0x0003
+#define WM8350_VMID_SHIFT                            0
+
+/*
+ * R9 (0x09) - Power mgmt (2)
+ */
+#define WM8350_IN3R_ENA                         0x0800
+#define WM8350_IN3L_ENA                         0x0400
+#define WM8350_INR_ENA                          0x0200
+#define WM8350_INL_ENA                          0x0100
+#define WM8350_MIXINR_ENA                       0x0080
+#define WM8350_MIXINL_ENA                       0x0040
+#define WM8350_OUT4_ENA                         0x0020
+#define WM8350_OUT3_ENA                         0x0010
+#define WM8350_MIXOUTR_ENA                      0x0002
+#define WM8350_MIXOUTL_ENA                      0x0001
+
+/*
+ * R10 (0x0A) - Power mgmt (3)
+ */
+#define WM8350_IN3R_TO_OUT2R                    0x0080
+#define WM8350_OUT2R_ENA                        0x0008
+#define WM8350_OUT2L_ENA                        0x0004
+#define WM8350_OUT1R_ENA                        0x0002
+#define WM8350_OUT1L_ENA                        0x0001
+
+/*
+ * R11 (0x0B) - Power mgmt (4)
+ */
+#define WM8350_SYSCLK_ENA                       0x4000
+#define WM8350_ADC_HPF_ENA                      0x2000
+#define WM8350_FLL_ENA                          0x0800
+#define WM8350_FLL_OSC_ENA                      0x0400
+#define WM8350_TOCLK_ENA                        0x0100
+#define WM8350_DACR_ENA                         0x0020
+#define WM8350_DACL_ENA                         0x0010
+#define WM8350_ADCR_ENA                         0x0008
+#define WM8350_ADCL_ENA                         0x0004
+
+/*
+ * R12 (0x0C) - Power mgmt (5)
+ */
+#define WM8350_CODEC_ENA                        0x1000
+#define WM8350_RTC_TICK_ENA                     0x0800
+#define WM8350_OSC32K_ENA                       0x0400
+#define WM8350_CHG_ENA                          0x0200
+#define WM8350_ACC_DET_ENA                      0x0100
+#define WM8350_AUXADC_ENA                       0x0080
+#define WM8350_DCMP4_ENA                        0x0008
+#define WM8350_DCMP3_ENA                        0x0004
+#define WM8350_DCMP2_ENA                        0x0002
+#define WM8350_DCMP1_ENA                        0x0001
+
+/*
+ * R13 (0x0D) - Power mgmt (6)
+ */
+#define WM8350_LS_ENA                           0x8000
+#define WM8350_LDO4_ENA                         0x0800
+#define WM8350_LDO3_ENA                         0x0400
+#define WM8350_LDO2_ENA                         0x0200
+#define WM8350_LDO1_ENA                         0x0100
+#define WM8350_DC6_ENA                          0x0020
+#define WM8350_DC5_ENA                          0x0010
+#define WM8350_DC4_ENA                          0x0008
+#define WM8350_DC3_ENA                          0x0004
+#define WM8350_DC2_ENA                          0x0002
+#define WM8350_DC1_ENA                          0x0001
+
+/*
+ * R14 (0x0E) - Power mgmt (7)
+ */
+#define WM8350_CS2_ENA                          0x0002
+#define WM8350_CS1_ENA                          0x0001
+
+/*
+ * R24 (0x18) - System Interrupts
+ */
+#define WM8350_OC_INT                           0x2000
+#define WM8350_UV_INT                           0x1000
+#define WM8350_PUTO_INT                         0x0800
+#define WM8350_CS_INT                           0x0200
+#define WM8350_EXT_INT                          0x0100
+#define WM8350_CODEC_INT                        0x0080
+#define WM8350_GP_INT                           0x0040
+#define WM8350_AUXADC_INT                       0x0020
+#define WM8350_RTC_INT                          0x0010
+#define WM8350_SYS_INT                          0x0008
+#define WM8350_CHG_INT                          0x0004
+#define WM8350_USB_INT                          0x0002
+#define WM8350_WKUP_INT                         0x0001
+
+/*
+ * R25 (0x19) - Interrupt Status 1
+ */
+#define WM8350_CHG_BAT_HOT_EINT                 0x8000
+#define WM8350_CHG_BAT_COLD_EINT                0x4000
+#define WM8350_CHG_BAT_FAIL_EINT                0x2000
+#define WM8350_CHG_TO_EINT                      0x1000
+#define WM8350_CHG_END_EINT                     0x0800
+#define WM8350_CHG_START_EINT                   0x0400
+#define WM8350_CHG_FAST_RDY_EINT                0x0200
+#define WM8350_RTC_PER_EINT                     0x0080
+#define WM8350_RTC_SEC_EINT                     0x0040
+#define WM8350_RTC_ALM_EINT                     0x0020
+#define WM8350_CHG_VBATT_LT_3P9_EINT            0x0004
+#define WM8350_CHG_VBATT_LT_3P1_EINT            0x0002
+#define WM8350_CHG_VBATT_LT_2P85_EINT           0x0001
+
+/*
+ * R26 (0x1A) - Interrupt Status 2
+ */
+#define WM8350_CS1_EINT                         0x2000
+#define WM8350_CS2_EINT                         0x1000
+#define WM8350_USB_LIMIT_EINT                   0x0400
+#define WM8350_AUXADC_DATARDY_EINT              0x0100
+#define WM8350_AUXADC_DCOMP4_EINT               0x0080
+#define WM8350_AUXADC_DCOMP3_EINT               0x0040
+#define WM8350_AUXADC_DCOMP2_EINT               0x0020
+#define WM8350_AUXADC_DCOMP1_EINT               0x0010
+#define WM8350_SYS_HYST_COMP_FAIL_EINT          0x0008
+#define WM8350_SYS_CHIP_GT115_EINT              0x0004
+#define WM8350_SYS_CHIP_GT140_EINT              0x0002
+#define WM8350_SYS_WDOG_TO_EINT                 0x0001
+
+/*
+ * R27 (0x1B) - Power Up Interrupt Status
+ */
+#define WM8350_PUTO_LDO4_EINT                   0x0800
+#define WM8350_PUTO_LDO3_EINT                   0x0400
+#define WM8350_PUTO_LDO2_EINT                   0x0200
+#define WM8350_PUTO_LDO1_EINT                   0x0100
+#define WM8350_PUTO_DC6_EINT                    0x0020
+#define WM8350_PUTO_DC5_EINT                    0x0010
+#define WM8350_PUTO_DC4_EINT                    0x0008
+#define WM8350_PUTO_DC3_EINT                    0x0004
+#define WM8350_PUTO_DC2_EINT                    0x0002
+#define WM8350_PUTO_DC1_EINT                    0x0001
+
+/*
+ * R28 (0x1C) - Under Voltage Interrupt status
+ */
+#define WM8350_UV_LDO4_EINT                     0x0800
+#define WM8350_UV_LDO3_EINT                     0x0400
+#define WM8350_UV_LDO2_EINT                     0x0200
+#define WM8350_UV_LDO1_EINT                     0x0100
+#define WM8350_UV_DC6_EINT                      0x0020
+#define WM8350_UV_DC5_EINT                      0x0010
+#define WM8350_UV_DC4_EINT                      0x0008
+#define WM8350_UV_DC3_EINT                      0x0004
+#define WM8350_UV_DC2_EINT                      0x0002
+#define WM8350_UV_DC1_EINT                      0x0001
+
+/*
+ * R29 (0x1D) - Over Current Interrupt status
+ */
+#define WM8350_OC_LS_EINT                       0x8000
+
+/*
+ * R30 (0x1E) - GPIO Interrupt Status
+ */
+#define WM8350_GP12_EINT                        0x1000
+#define WM8350_GP11_EINT                        0x0800
+#define WM8350_GP10_EINT                        0x0400
+#define WM8350_GP9_EINT                         0x0200
+#define WM8350_GP8_EINT                         0x0100
+#define WM8350_GP7_EINT                         0x0080
+#define WM8350_GP6_EINT                         0x0040
+#define WM8350_GP5_EINT                         0x0020
+#define WM8350_GP4_EINT                         0x0010
+#define WM8350_GP3_EINT                         0x0008
+#define WM8350_GP2_EINT                         0x0004
+#define WM8350_GP1_EINT                         0x0002
+#define WM8350_GP0_EINT                         0x0001
+
+/*
+ * R31 (0x1F) - Comparator Interrupt Status
+ */
+#define WM8350_EXT_USB_FB_EINT                  0x8000
+#define WM8350_EXT_WALL_FB_EINT                 0x4000
+#define WM8350_EXT_BAT_FB_EINT                  0x2000
+#define WM8350_CODEC_JCK_DET_L_EINT             0x0800
+#define WM8350_CODEC_JCK_DET_R_EINT             0x0400
+#define WM8350_CODEC_MICSCD_EINT                0x0200
+#define WM8350_CODEC_MICD_EINT                  0x0100
+#define WM8350_WKUP_OFF_STATE_EINT              0x0040
+#define WM8350_WKUP_HIB_STATE_EINT              0x0020
+#define WM8350_WKUP_CONV_FAULT_EINT             0x0010
+#define WM8350_WKUP_WDOG_RST_EINT               0x0008
+#define WM8350_WKUP_GP_PWR_ON_EINT              0x0004
+#define WM8350_WKUP_ONKEY_EINT                  0x0002
+#define WM8350_WKUP_GP_WAKEUP_EINT              0x0001
+
+/*
+ * R32 (0x20) - System Interrupts Mask
+ */
+#define WM8350_IM_OC_INT                        0x2000
+#define WM8350_IM_UV_INT                        0x1000
+#define WM8350_IM_PUTO_INT                      0x0800
+#define WM8350_IM_SPARE_INT                     0x0400
+#define WM8350_IM_CS_INT                        0x0200
+#define WM8350_IM_EXT_INT                       0x0100
+#define WM8350_IM_CODEC_INT                     0x0080
+#define WM8350_IM_GP_INT                        0x0040
+#define WM8350_IM_AUXADC_INT                    0x0020
+#define WM8350_IM_RTC_INT                       0x0010
+#define WM8350_IM_SYS_INT                       0x0008
+#define WM8350_IM_CHG_INT                       0x0004
+#define WM8350_IM_USB_INT                       0x0002
+#define WM8350_IM_WKUP_INT                      0x0001
+
+/*
+ * R33 (0x21) - Interrupt Status 1 Mask
+ */
+#define WM8350_IM_CHG_BAT_HOT_EINT              0x8000
+#define WM8350_IM_CHG_BAT_COLD_EINT             0x4000
+#define WM8350_IM_CHG_BAT_FAIL_EINT             0x2000
+#define WM8350_IM_CHG_TO_EINT                   0x1000
+#define WM8350_IM_CHG_END_EINT                  0x0800
+#define WM8350_IM_CHG_START_EINT                0x0400
+#define WM8350_IM_CHG_FAST_RDY_EINT             0x0200
+#define WM8350_IM_RTC_PER_EINT                  0x0080
+#define WM8350_IM_RTC_SEC_EINT                  0x0040
+#define WM8350_IM_RTC_ALM_EINT                  0x0020
+#define WM8350_IM_CHG_VBATT_LT_3P9_EINT         0x0004
+#define WM8350_IM_CHG_VBATT_LT_3P1_EINT         0x0002
+#define WM8350_IM_CHG_VBATT_LT_2P85_EINT        0x0001
+
+/*
+ * R34 (0x22) - Interrupt Status 2 Mask
+ */
+#define WM8350_IM_SPARE2_EINT                   0x8000
+#define WM8350_IM_SPARE1_EINT                   0x4000
+#define WM8350_IM_CS1_EINT                      0x2000
+#define WM8350_IM_CS2_EINT                      0x1000
+#define WM8350_IM_USB_LIMIT_EINT                0x0400
+#define WM8350_IM_AUXADC_DATARDY_EINT           0x0100
+#define WM8350_IM_AUXADC_DCOMP4_EINT            0x0080
+#define WM8350_IM_AUXADC_DCOMP3_EINT            0x0040
+#define WM8350_IM_AUXADC_DCOMP2_EINT            0x0020
+#define WM8350_IM_AUXADC_DCOMP1_EINT            0x0010
+#define WM8350_IM_SYS_HYST_COMP_FAIL_EINT       0x0008
+#define WM8350_IM_SYS_CHIP_GT115_EINT           0x0004
+#define WM8350_IM_SYS_CHIP_GT140_EINT           0x0002
+#define WM8350_IM_SYS_WDOG_TO_EINT              0x0001
+
+/*
+ * R35 (0x23) - Power Up Interrupt Status Mask
+ */
+#define WM8350_IM_PUTO_LDO4_EINT                0x0800
+#define WM8350_IM_PUTO_LDO3_EINT                0x0400
+#define WM8350_IM_PUTO_LDO2_EINT                0x0200
+#define WM8350_IM_PUTO_LDO1_EINT                0x0100
+#define WM8350_IM_PUTO_DC6_EINT                 0x0020
+#define WM8350_IM_PUTO_DC5_EINT                 0x0010
+#define WM8350_IM_PUTO_DC4_EINT                 0x0008
+#define WM8350_IM_PUTO_DC3_EINT                 0x0004
+#define WM8350_IM_PUTO_DC2_EINT                 0x0002
+#define WM8350_IM_PUTO_DC1_EINT                 0x0001
+
+/*
+ * R36 (0x24) - Under Voltage Interrupt status Mask
+ */
+#define WM8350_IM_UV_LDO4_EINT                  0x0800
+#define WM8350_IM_UV_LDO3_EINT                  0x0400
+#define WM8350_IM_UV_LDO2_EINT                  0x0200
+#define WM8350_IM_UV_LDO1_EINT                  0x0100
+#define WM8350_IM_UV_DC6_EINT                   0x0020
+#define WM8350_IM_UV_DC5_EINT                   0x0010
+#define WM8350_IM_UV_DC4_EINT                   0x0008
+#define WM8350_IM_UV_DC3_EINT                   0x0004
+#define WM8350_IM_UV_DC2_EINT                   0x0002
+#define WM8350_IM_UV_DC1_EINT                   0x0001
+
+/*
+ * R37 (0x25) - Over Current Interrupt status Mask
+ */
+#define WM8350_IM_OC_LS_EINT                    0x8000
+
+/*
+ * R38 (0x26) - GPIO Interrupt Status Mask
+ */
+#define WM8350_IM_GP12_EINT                     0x1000
+#define WM8350_IM_GP11_EINT                     0x0800
+#define WM8350_IM_GP10_EINT                     0x0400
+#define WM8350_IM_GP9_EINT                      0x0200
+#define WM8350_IM_GP8_EINT                      0x0100
+#define WM8350_IM_GP7_EINT                      0x0080
+#define WM8350_IM_GP6_EINT                      0x0040
+#define WM8350_IM_GP5_EINT                      0x0020
+#define WM8350_IM_GP4_EINT                      0x0010
+#define WM8350_IM_GP3_EINT                      0x0008
+#define WM8350_IM_GP2_EINT                      0x0004
+#define WM8350_IM_GP1_EINT                      0x0002
+#define WM8350_IM_GP0_EINT                      0x0001
+
+/*
+ * R39 (0x27) - Comparator Interrupt Status Mask
+ */
+#define WM8350_IM_EXT_USB_FB_EINT               0x8000
+#define WM8350_IM_EXT_WALL_FB_EINT              0x4000
+#define WM8350_IM_EXT_BAT_FB_EINT               0x2000
+#define WM8350_IM_CODEC_JCK_DET_L_EINT          0x0800
+#define WM8350_IM_CODEC_JCK_DET_R_EINT          0x0400
+#define WM8350_IM_CODEC_MICSCD_EINT             0x0200
+#define WM8350_IM_CODEC_MICD_EINT               0x0100
+#define WM8350_IM_WKUP_OFF_STATE_EINT           0x0040
+#define WM8350_IM_WKUP_HIB_STATE_EINT           0x0020
+#define WM8350_IM_WKUP_CONV_FAULT_EINT          0x0010
+#define WM8350_IM_WKUP_WDOG_RST_EINT            0x0008
+#define WM8350_IM_WKUP_GP_PWR_ON_EINT           0x0004
+#define WM8350_IM_WKUP_ONKEY_EINT               0x0002
+#define WM8350_IM_WKUP_GP_WAKEUP_EINT           0x0001
+
+/*
+ * R220 (0xDC) - RAM BIST 1
+ */
+#define WM8350_READ_STATUS                      0x0800
+#define WM8350_TSTRAM_CLK                       0x0100
+#define WM8350_TSTRAM_CLK_ENA                   0x0080
+#define WM8350_STARTSEQ                         0x0040
+#define WM8350_READ_SRC                         0x0020
+#define WM8350_COUNT_DIR                        0x0010
+#define WM8350_TSTRAM_MODE_MASK                 0x000E
+#define WM8350_TSTRAM_ENA                       0x0001
+
+/*
+ * R225 (0xE1) - DCDC/LDO status
+ */
+#define WM8350_LS_STS                           0x8000
+#define WM8350_LDO4_STS                         0x0800
+#define WM8350_LDO3_STS                         0x0400
+#define WM8350_LDO2_STS                         0x0200
+#define WM8350_LDO1_STS                         0x0100
+#define WM8350_DC6_STS                          0x0020
+#define WM8350_DC5_STS                          0x0010
+#define WM8350_DC4_STS                          0x0008
+#define WM8350_DC3_STS                          0x0004
+#define WM8350_DC2_STS                          0x0002
+#define WM8350_DC1_STS                          0x0001
+
+/*
+ * R226 (0xE2) - Charger status
+ */
+#define WM8350_CHG_BATT_HOT_OVRDE		0x8000
+#define WM8350_CHG_BATT_COLD_OVRDE		0x4000
+
+/*
+ * R227 (0xE3) - Misc Overrides
+ */
+#define WM8350_USB_LIMIT_OVRDE			0x0400
+
+/*
+ * R227 (0xE7) - Comparator Overrides
+ */
+#define WM8350_USB_FB_OVRDE			0x8000
+#define WM8350_WALL_FB_OVRDE			0x4000
+#define WM8350_BATT_FB_OVRDE			0x2000
+
+
+/*
+ * R233 (0xE9) - State Machinine Status
+ */
+#define WM8350_USB_SM_MASK			0x0700
+#define WM8350_USB_SM_SHIFT			8
+
+#define WM8350_USB_SM_100_SLV   1
+#define WM8350_USB_SM_500_SLV   5
+#define WM8350_USB_SM_STDBY_SLV 7
+
+/* WM8350 wake up conditions */
+#define WM8350_IRQ_WKUP_OFF_STATE		43
+#define WM8350_IRQ_WKUP_HIB_STATE		44
+#define WM8350_IRQ_WKUP_CONV_FAULT		45
+#define WM8350_IRQ_WKUP_WDOG_RST		46
+#define WM8350_IRQ_WKUP_GP_PWR_ON		47
+#define WM8350_IRQ_WKUP_ONKEY			48
+#define WM8350_IRQ_WKUP_GP_WAKEUP		49
+
+/* wm8350 chip revisions */
+#define WM8350_REV_E				0x4
+#define WM8350_REV_F				0x5
+#define WM8350_REV_G				0x6
+#define WM8350_REV_H				0x7
+
+#define WM8350_NUM_IRQ				63
+
+#define WM8350_NUM_IRQ_REGS 7
+
+struct wm8350_reg_access {
+	u16 readable;		/* Mask of readable bits */
+	u16 writable;		/* Mask of writable bits */
+	u16 vol;		/* Mask of volatile bits */
+};
+extern const struct wm8350_reg_access wm8350_reg_io_map[];
+extern const u16 wm8350_mode0_defaults[];
+extern const u16 wm8350_mode1_defaults[];
+extern const u16 wm8350_mode2_defaults[];
+extern const u16 wm8350_mode3_defaults[];
+extern const u16 wm8351_mode0_defaults[];
+extern const u16 wm8351_mode1_defaults[];
+extern const u16 wm8351_mode2_defaults[];
+extern const u16 wm8351_mode3_defaults[];
+extern const u16 wm8352_mode0_defaults[];
+extern const u16 wm8352_mode1_defaults[];
+extern const u16 wm8352_mode2_defaults[];
+extern const u16 wm8352_mode3_defaults[];
+
+struct wm8350;
+
+struct wm8350_hwmon {
+	struct platform_device *pdev;
+	struct device *classdev;
+};
+
+struct wm8350 {
+	struct device *dev;
+
+	/* device IO */
+	union {
+		struct i2c_client *i2c_client;
+		struct spi_device *spi_device;
+	};
+	int (*read_dev)(struct wm8350 *wm8350, char reg, int size, void *dest);
+	int (*write_dev)(struct wm8350 *wm8350, char reg, int size,
+			 void *src);
+	u16 *reg_cache;
+
+	struct mutex auxadc_mutex;
+	struct completion auxadc_done;
+
+	/* Interrupt handling */
+	struct mutex irq_lock;
+	int chip_irq;
+	int irq_base;
+	u16 irq_masks[WM8350_NUM_IRQ_REGS];
+
+	/* Client devices */
+	struct wm8350_codec codec;
+	struct wm8350_gpio gpio;
+	struct wm8350_hwmon hwmon;
+	struct wm8350_pmic pmic;
+	struct wm8350_power power;
+	struct wm8350_rtc rtc;
+	struct wm8350_wdt wdt;
+};
+
+/**
+ * Data to be supplied by the platform to initialise the WM8350.
+ *
+ * @init: Function called during driver initialisation.  Should be
+ *        used by the platform to configure GPIO functions and similar.
+ * @irq_high: Set if WM8350 IRQ is active high.
+ * @irq_base: Base IRQ for genirq (not currently used).
+ * @gpio_base: Base for gpiolib.
+ */
+struct wm8350_platform_data {
+	int (*init)(struct wm8350 *wm8350);
+	int irq_high;
+	int irq_base;
+	int gpio_base;
+};
+
+
+/*
+ * WM8350 device initialisation and exit.
+ */
+int wm8350_device_init(struct wm8350 *wm8350, int irq,
+		       struct wm8350_platform_data *pdata);
+void wm8350_device_exit(struct wm8350 *wm8350);
+
+/*
+ * WM8350 device IO
+ */
+int wm8350_clear_bits(struct wm8350 *wm8350, u16 reg, u16 mask);
+int wm8350_set_bits(struct wm8350 *wm8350, u16 reg, u16 mask);
+u16 wm8350_reg_read(struct wm8350 *wm8350, int reg);
+int wm8350_reg_write(struct wm8350 *wm8350, int reg, u16 val);
+int wm8350_reg_lock(struct wm8350 *wm8350);
+int wm8350_reg_unlock(struct wm8350 *wm8350);
+int wm8350_block_read(struct wm8350 *wm8350, int reg, int size, u16 *dest);
+int wm8350_block_write(struct wm8350 *wm8350, int reg, int size, u16 *src);
+
+/*
+ * WM8350 internal interrupts
+ */
+static inline int wm8350_register_irq(struct wm8350 *wm8350, int irq,
+				      irq_handler_t handler,
+				      unsigned long flags,
+				      const char *name, void *data)
+{
+	if (!wm8350->irq_base)
+		return -ENODEV;
+
+	return request_threaded_irq(irq + wm8350->irq_base, NULL,
+				    handler, flags, name, data);
+}
+
+static inline void wm8350_free_irq(struct wm8350 *wm8350, int irq, void *data)
+{
+	free_irq(irq + wm8350->irq_base, data);
+}
+
+static inline void wm8350_mask_irq(struct wm8350 *wm8350, int irq)
+{
+	disable_irq(irq + wm8350->irq_base);
+}
+
+static inline void wm8350_unmask_irq(struct wm8350 *wm8350, int irq)
+{
+	enable_irq(irq + wm8350->irq_base);
+}
+
+int wm8350_irq_init(struct wm8350 *wm8350, int irq,
+		    struct wm8350_platform_data *pdata);
+int wm8350_irq_exit(struct wm8350 *wm8350);
+
+#endif
diff --git a/include/linux/mfd/wm8350/gpio.h b/include/linux/mfd/wm8350/gpio.h
new file mode 100644
index 00000000..d657bcd6
--- /dev/null
+++ b/include/linux/mfd/wm8350/gpio.h
@@ -0,0 +1,361 @@
+/*
+ * gpio.h  --  GPIO Driver for Wolfson WM8350 PMIC
+ *
+ * Copyright 2007 Wolfson Microelectronics PLC
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __LINUX_MFD_WM8350_GPIO_H_
+#define __LINUX_MFD_WM8350_GPIO_H_
+
+#include <linux/platform_device.h>
+
+/*
+ * GPIO Registers.
+ */
+#define WM8350_GPIO_DEBOUNCE                    0x80
+#define WM8350_GPIO_PIN_PULL_UP_CONTROL         0x81
+#define WM8350_GPIO_PULL_DOWN_CONTROL           0x82
+#define WM8350_GPIO_INT_MODE                    0x83
+#define WM8350_GPIO_CONTROL                     0x85
+#define WM8350_GPIO_CONFIGURATION_I_O           0x86
+#define WM8350_GPIO_PIN_POLARITY_TYPE           0x87
+#define WM8350_GPIO_FUNCTION_SELECT_1           0x8C
+#define WM8350_GPIO_FUNCTION_SELECT_2           0x8D
+#define WM8350_GPIO_FUNCTION_SELECT_3           0x8E
+#define WM8350_GPIO_FUNCTION_SELECT_4           0x8F
+#define WM8350_GPIO_LEVEL			0xE6
+
+/*
+ * GPIO Functions
+ */
+#define WM8350_GPIO0_GPIO_IN			0x0
+#define WM8350_GPIO0_GPIO_OUT			0x0
+#define WM8350_GPIO0_PWR_ON_IN			0x1
+#define WM8350_GPIO0_PWR_ON_OUT			0x1
+#define WM8350_GPIO0_LDO_EN_IN			0x2
+#define WM8350_GPIO0_VRTC_OUT			0x2
+#define WM8350_GPIO0_LPWR1_IN			0x3
+#define WM8350_GPIO0_POR_B_OUT			0x3
+
+#define WM8350_GPIO1_GPIO_IN			0x0
+#define WM8350_GPIO1_GPIO_OUT			0x0
+#define WM8350_GPIO1_PWR_ON_IN			0x1
+#define WM8350_GPIO1_DO_CONF_OUT		0x1
+#define WM8350_GPIO1_LDO_EN_IN			0x2
+#define WM8350_GPIO1_RESET_OUT			0x2
+#define WM8350_GPIO1_LPWR2_IN			0x3
+#define WM8350_GPIO1_MEMRST_OUT			0x3
+
+#define WM8350_GPIO2_GPIO_IN			0x0
+#define WM8350_GPIO2_GPIO_OUT			0x0
+#define WM8350_GPIO2_PWR_ON_IN			0x1
+#define WM8350_GPIO2_PWR_ON_OUT			0x1
+#define WM8350_GPIO2_WAKE_UP_IN			0x2
+#define WM8350_GPIO2_VRTC_OUT			0x2
+#define WM8350_GPIO2_32KHZ_IN			0x3
+#define WM8350_GPIO2_32KHZ_OUT			0x3
+
+#define WM8350_GPIO3_GPIO_IN			0x0
+#define WM8350_GPIO3_GPIO_OUT			0x0
+#define WM8350_GPIO3_PWR_ON_IN			0x1
+#define WM8350_GPIO3_P_CLK_OUT			0x1
+#define WM8350_GPIO3_LDO_EN_IN			0x2
+#define WM8350_GPIO3_VRTC_OUT			0x2
+#define WM8350_GPIO3_PWR_OFF_IN			0x3
+#define WM8350_GPIO3_32KHZ_OUT			0x3
+
+#define WM8350_GPIO4_GPIO_IN			0x0
+#define WM8350_GPIO4_GPIO_OUT			0x0
+#define WM8350_GPIO4_MR_IN			0x1
+#define WM8350_GPIO4_MEM_RST_OUT		0x1
+#define WM8350_GPIO4_FLASH_IN			0x2
+#define WM8350_GPIO4_ADA_OUT			0x2
+#define WM8350_GPIO4_HIBERNATE_IN		0x3
+#define WM8350_GPIO4_FLASH_OUT			0x3
+#define WM8350_GPIO4_MICDET_OUT			0x4
+#define WM8350_GPIO4_MICSHT_OUT			0x5
+
+#define WM8350_GPIO5_GPIO_IN			0x0
+#define WM8350_GPIO5_GPIO_OUT			0x0
+#define WM8350_GPIO5_LPWR1_IN			0x1
+#define WM8350_GPIO5_P_CLK_OUT			0x1
+#define WM8350_GPIO5_ADCLRCLK_IN		0x2
+#define WM8350_GPIO5_ADCLRCLK_OUT		0x2
+#define WM8350_GPIO5_HIBERNATE_IN		0x3
+#define WM8350_GPIO5_32KHZ_OUT			0x3
+#define WM8350_GPIO5_MICDET_OUT			0x4
+#define WM8350_GPIO5_MICSHT_OUT			0x5
+#define WM8350_GPIO5_ADA_OUT			0x6
+#define WM8350_GPIO5_OPCLK_OUT			0x7
+
+#define WM8350_GPIO6_GPIO_IN			0x0
+#define WM8350_GPIO6_GPIO_OUT			0x0
+#define WM8350_GPIO6_LPWR2_IN			0x1
+#define WM8350_GPIO6_MEMRST_OUT			0x1
+#define WM8350_GPIO6_FLASH_IN			0x2
+#define WM8350_GPIO6_ADA_OUT			0x2
+#define WM8350_GPIO6_HIBERNATE_IN		0x3
+#define WM8350_GPIO6_RTC_OUT			0x3
+#define WM8350_GPIO6_MICDET_OUT			0x4
+#define WM8350_GPIO6_MICSHT_OUT			0x5
+#define WM8350_GPIO6_ADCLRCLKB_OUT		0x6
+#define WM8350_GPIO6_SDOUT_OUT			0x7
+
+#define WM8350_GPIO7_GPIO_IN			0x0
+#define WM8350_GPIO7_GPIO_OUT			0x0
+#define WM8350_GPIO7_LPWR3_IN			0x1
+#define WM8350_GPIO7_P_CLK_OUT			0x1
+#define WM8350_GPIO7_MASK_IN			0x2
+#define WM8350_GPIO7_VCC_FAULT_OUT		0x2
+#define WM8350_GPIO7_HIBERNATE_IN		0x3
+#define WM8350_GPIO7_BATT_FAULT_OUT		0x3
+#define WM8350_GPIO7_MICDET_OUT			0x4
+#define WM8350_GPIO7_MICSHT_OUT			0x5
+#define WM8350_GPIO7_ADA_OUT			0x6
+#define WM8350_GPIO7_CSB_IN			0x7
+
+#define WM8350_GPIO8_GPIO_IN			0x0
+#define WM8350_GPIO8_GPIO_OUT			0x0
+#define WM8350_GPIO8_MR_IN			0x1
+#define WM8350_GPIO8_VCC_FAULT_OUT		0x1
+#define WM8350_GPIO8_ADCBCLK_IN			0x2
+#define WM8350_GPIO8_ADCBCLK_OUT		0x2
+#define WM8350_GPIO8_PWR_OFF_IN			0x3
+#define WM8350_GPIO8_BATT_FAULT_OUT		0x3
+#define WM8350_GPIO8_ALTSCL_IN			0xf
+
+#define WM8350_GPIO9_GPIO_IN			0x0
+#define WM8350_GPIO9_GPIO_OUT			0x0
+#define WM8350_GPIO9_HEARTBEAT_IN		0x1
+#define WM8350_GPIO9_VCC_FAULT_OUT		0x1
+#define WM8350_GPIO9_MASK_IN			0x2
+#define WM8350_GPIO9_LINE_GT_BATT_OUT		0x2
+#define WM8350_GPIO9_PWR_OFF_IN			0x3
+#define WM8350_GPIO9_BATT_FAULT_OUT		0x3
+#define WM8350_GPIO9_ALTSDA_OUT			0xf
+
+#define WM8350_GPIO10_GPIO_IN			0x0
+#define WM8350_GPIO10_GPIO_OUT			0x0
+#define WM8350_GPIO10_ISINKC_OUT		0x1
+#define WM8350_GPIO10_PWR_OFF_IN		0x2
+#define WM8350_GPIO10_LINE_GT_BATT_OUT		0x2
+#define WM8350_GPIO10_CHD_IND_IN		0x3
+
+#define WM8350_GPIO11_GPIO_IN			0x0
+#define WM8350_GPIO11_GPIO_OUT			0x0
+#define WM8350_GPIO11_ISINKD_OUT		0x1
+#define WM8350_GPIO11_WAKEUP_IN			0x2
+#define WM8350_GPIO11_LINE_GT_BATT_OUT		0x2
+#define WM8350_GPIO11_CHD_IND_IN		0x3
+
+#define WM8350_GPIO12_GPIO_IN			0x0
+#define WM8350_GPIO12_GPIO_OUT			0x0
+#define WM8350_GPIO12_ISINKE_OUT		0x1
+#define WM8350_GPIO12_LINE_GT_BATT_OUT		0x2
+#define WM8350_GPIO12_LINE_EN_OUT		0x3
+#define WM8350_GPIO12_32KHZ_OUT			0x4
+
+#define WM8350_GPIO_DIR_IN			0
+#define WM8350_GPIO_DIR_OUT			1
+#define WM8350_GPIO_ACTIVE_LOW			0
+#define WM8350_GPIO_ACTIVE_HIGH			1
+#define WM8350_GPIO_PULL_NONE			0
+#define WM8350_GPIO_PULL_UP			1
+#define WM8350_GPIO_PULL_DOWN			2
+#define WM8350_GPIO_INVERT_OFF			0
+#define WM8350_GPIO_INVERT_ON			1
+#define WM8350_GPIO_DEBOUNCE_OFF		0
+#define WM8350_GPIO_DEBOUNCE_ON			1
+
+/*
+ * R30 (0x1E) - GPIO Interrupt Status
+ */
+#define WM8350_GP12_EINT                        0x1000
+#define WM8350_GP11_EINT                        0x0800
+#define WM8350_GP10_EINT                        0x0400
+#define WM8350_GP9_EINT                         0x0200
+#define WM8350_GP8_EINT                         0x0100
+#define WM8350_GP7_EINT                         0x0080
+#define WM8350_GP6_EINT                         0x0040
+#define WM8350_GP5_EINT                         0x0020
+#define WM8350_GP4_EINT                         0x0010
+#define WM8350_GP3_EINT                         0x0008
+#define WM8350_GP2_EINT                         0x0004
+#define WM8350_GP1_EINT                         0x0002
+#define WM8350_GP0_EINT                         0x0001
+
+
+/*
+ * R128 (0x80) - GPIO Debounce
+ */
+#define WM8350_GP12_DB                          0x1000
+#define WM8350_GP11_DB                          0x0800
+#define WM8350_GP10_DB                          0x0400
+#define WM8350_GP9_DB                           0x0200
+#define WM8350_GP8_DB                           0x0100
+#define WM8350_GP7_DB                           0x0080
+#define WM8350_GP6_DB                           0x0040
+#define WM8350_GP5_DB                           0x0020
+#define WM8350_GP4_DB                           0x0010
+#define WM8350_GP3_DB                           0x0008
+#define WM8350_GP2_DB                           0x0004
+#define WM8350_GP1_DB                           0x0002
+#define WM8350_GP0_DB                           0x0001
+
+/*
+ * R129 (0x81) - GPIO Pin pull up Control
+ */
+#define WM8350_GP12_PU                          0x1000
+#define WM8350_GP11_PU                          0x0800
+#define WM8350_GP10_PU                          0x0400
+#define WM8350_GP9_PU                           0x0200
+#define WM8350_GP8_PU                           0x0100
+#define WM8350_GP7_PU                           0x0080
+#define WM8350_GP6_PU                           0x0040
+#define WM8350_GP5_PU                           0x0020
+#define WM8350_GP4_PU                           0x0010
+#define WM8350_GP3_PU                           0x0008
+#define WM8350_GP2_PU                           0x0004
+#define WM8350_GP1_PU                           0x0002
+#define WM8350_GP0_PU                           0x0001
+
+/*
+ * R130 (0x82) - GPIO Pull down Control
+ */
+#define WM8350_GP12_PD                          0x1000
+#define WM8350_GP11_PD                          0x0800
+#define WM8350_GP10_PD                          0x0400
+#define WM8350_GP9_PD                           0x0200
+#define WM8350_GP8_PD                           0x0100
+#define WM8350_GP7_PD                           0x0080
+#define WM8350_GP6_PD                           0x0040
+#define WM8350_GP5_PD                           0x0020
+#define WM8350_GP4_PD                           0x0010
+#define WM8350_GP3_PD                           0x0008
+#define WM8350_GP2_PD                           0x0004
+#define WM8350_GP1_PD                           0x0002
+#define WM8350_GP0_PD                           0x0001
+
+/*
+ * R131 (0x83) - GPIO Interrupt Mode
+ */
+#define WM8350_GP12_INTMODE                     0x1000
+#define WM8350_GP11_INTMODE                     0x0800
+#define WM8350_GP10_INTMODE                     0x0400
+#define WM8350_GP9_INTMODE                      0x0200
+#define WM8350_GP8_INTMODE                      0x0100
+#define WM8350_GP7_INTMODE                      0x0080
+#define WM8350_GP6_INTMODE                      0x0040
+#define WM8350_GP5_INTMODE                      0x0020
+#define WM8350_GP4_INTMODE                      0x0010
+#define WM8350_GP3_INTMODE                      0x0008
+#define WM8350_GP2_INTMODE                      0x0004
+#define WM8350_GP1_INTMODE                      0x0002
+#define WM8350_GP0_INTMODE                      0x0001
+
+/*
+ * R133 (0x85) - GPIO Control
+ */
+#define WM8350_GP_DBTIME_MASK                   0x00C0
+
+/*
+ * R134 (0x86) - GPIO Configuration (i/o)
+ */
+#define WM8350_GP12_DIR                         0x1000
+#define WM8350_GP11_DIR                         0x0800
+#define WM8350_GP10_DIR                         0x0400
+#define WM8350_GP9_DIR                          0x0200
+#define WM8350_GP8_DIR                          0x0100
+#define WM8350_GP7_DIR                          0x0080
+#define WM8350_GP6_DIR                          0x0040
+#define WM8350_GP5_DIR                          0x0020
+#define WM8350_GP4_DIR                          0x0010
+#define WM8350_GP3_DIR                          0x0008
+#define WM8350_GP2_DIR                          0x0004
+#define WM8350_GP1_DIR                          0x0002
+#define WM8350_GP0_DIR                          0x0001
+
+/*
+ * R135 (0x87) - GPIO Pin Polarity / Type
+ */
+#define WM8350_GP12_CFG                         0x1000
+#define WM8350_GP11_CFG                         0x0800
+#define WM8350_GP10_CFG                         0x0400
+#define WM8350_GP9_CFG                          0x0200
+#define WM8350_GP8_CFG                          0x0100
+#define WM8350_GP7_CFG                          0x0080
+#define WM8350_GP6_CFG                          0x0040
+#define WM8350_GP5_CFG                          0x0020
+#define WM8350_GP4_CFG                          0x0010
+#define WM8350_GP3_CFG                          0x0008
+#define WM8350_GP2_CFG                          0x0004
+#define WM8350_GP1_CFG                          0x0002
+#define WM8350_GP0_CFG                          0x0001
+
+/*
+ * R140 (0x8C) - GPIO Function Select 1
+ */
+#define WM8350_GP3_FN_MASK                      0xF000
+#define WM8350_GP2_FN_MASK                      0x0F00
+#define WM8350_GP1_FN_MASK                      0x00F0
+#define WM8350_GP0_FN_MASK                      0x000F
+
+/*
+ * R141 (0x8D) - GPIO Function Select 2
+ */
+#define WM8350_GP7_FN_MASK                      0xF000
+#define WM8350_GP6_FN_MASK                      0x0F00
+#define WM8350_GP5_FN_MASK                      0x00F0
+#define WM8350_GP4_FN_MASK                      0x000F
+
+/*
+ * R142 (0x8E) - GPIO Function Select 3
+ */
+#define WM8350_GP11_FN_MASK                     0xF000
+#define WM8350_GP10_FN_MASK                     0x0F00
+#define WM8350_GP9_FN_MASK                      0x00F0
+#define WM8350_GP8_FN_MASK                      0x000F
+
+/*
+ * R143 (0x8F) - GPIO Function Select 4
+ */
+#define WM8350_GP12_FN_MASK                     0x000F
+
+/*
+ * R230 (0xE6) - GPIO Pin Status
+ */
+#define WM8350_GP12_LVL                         0x1000
+#define WM8350_GP11_LVL                         0x0800
+#define WM8350_GP10_LVL                         0x0400
+#define WM8350_GP9_LVL                          0x0200
+#define WM8350_GP8_LVL                          0x0100
+#define WM8350_GP7_LVL                          0x0080
+#define WM8350_GP6_LVL                          0x0040
+#define WM8350_GP5_LVL                          0x0020
+#define WM8350_GP4_LVL                          0x0010
+#define WM8350_GP3_LVL                          0x0008
+#define WM8350_GP2_LVL                          0x0004
+#define WM8350_GP1_LVL                          0x0002
+#define WM8350_GP0_LVL                          0x0001
+
+struct wm8350;
+
+int wm8350_gpio_config(struct wm8350 *wm8350, int gpio, int dir, int func,
+		       int pol, int pull, int invert, int debounce);
+
+struct wm8350_gpio {
+	struct platform_device *pdev;
+};
+
+/*
+ * GPIO Interrupts
+ */
+#define WM8350_IRQ_GPIO(x)                      (50 + x)
+
+#endif
diff --git a/include/linux/mfd/wm8350/pmic.h b/include/linux/mfd/wm8350/pmic.h
new file mode 100644
index 00000000..579b50ca
--- /dev/null
+++ b/include/linux/mfd/wm8350/pmic.h
@@ -0,0 +1,781 @@
+/*
+ * pmic.h  --  Power Management Driver for Wolfson WM8350 PMIC
+ *
+ * Copyright 2007 Wolfson Microelectronics PLC
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __LINUX_MFD_WM8350_PMIC_H
+#define __LINUX_MFD_WM8350_PMIC_H
+
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/regulator/machine.h>
+
+/*
+ * Register values.
+ */
+
+#define WM8350_CURRENT_SINK_DRIVER_A            0xAC
+#define WM8350_CSA_FLASH_CONTROL                0xAD
+#define WM8350_CURRENT_SINK_DRIVER_B            0xAE
+#define WM8350_CSB_FLASH_CONTROL                0xAF
+#define WM8350_DCDC_LDO_REQUESTED               0xB0
+#define WM8350_DCDC_ACTIVE_OPTIONS              0xB1
+#define WM8350_DCDC_SLEEP_OPTIONS               0xB2
+#define WM8350_POWER_CHECK_COMPARATOR           0xB3
+#define WM8350_DCDC1_CONTROL                    0xB4
+#define WM8350_DCDC1_TIMEOUTS                   0xB5
+#define WM8350_DCDC1_LOW_POWER                  0xB6
+#define WM8350_DCDC2_CONTROL                    0xB7
+#define WM8350_DCDC2_TIMEOUTS                   0xB8
+#define WM8350_DCDC3_CONTROL                    0xBA
+#define WM8350_DCDC3_TIMEOUTS                   0xBB
+#define WM8350_DCDC3_LOW_POWER                  0xBC
+#define WM8350_DCDC4_CONTROL                    0xBD
+#define WM8350_DCDC4_TIMEOUTS                   0xBE
+#define WM8350_DCDC4_LOW_POWER                  0xBF
+#define WM8350_DCDC5_CONTROL                    0xC0
+#define WM8350_DCDC5_TIMEOUTS                   0xC1
+#define WM8350_DCDC6_CONTROL                    0xC3
+#define WM8350_DCDC6_TIMEOUTS                   0xC4
+#define WM8350_DCDC6_LOW_POWER                  0xC5
+#define WM8350_LIMIT_SWITCH_CONTROL             0xC7
+#define WM8350_LDO1_CONTROL                     0xC8
+#define WM8350_LDO1_TIMEOUTS                    0xC9
+#define WM8350_LDO1_LOW_POWER                   0xCA
+#define WM8350_LDO2_CONTROL                     0xCB
+#define WM8350_LDO2_TIMEOUTS                    0xCC
+#define WM8350_LDO2_LOW_POWER                   0xCD
+#define WM8350_LDO3_CONTROL                     0xCE
+#define WM8350_LDO3_TIMEOUTS                    0xCF
+#define WM8350_LDO3_LOW_POWER                   0xD0
+#define WM8350_LDO4_CONTROL                     0xD1
+#define WM8350_LDO4_TIMEOUTS                    0xD2
+#define WM8350_LDO4_LOW_POWER                   0xD3
+#define WM8350_VCC_FAULT_MASKS                  0xD7
+#define WM8350_MAIN_BANDGAP_CONTROL             0xD8
+#define WM8350_OSC_CONTROL                      0xD9
+#define WM8350_RTC_TICK_CONTROL                 0xDA
+#define WM8350_SECURITY                         0xDB
+#define WM8350_RAM_BIST_1                       0xDC
+#define WM8350_DCDC_LDO_STATUS                  0xE1
+#define WM8350_GPIO_PIN_STATUS                  0xE6
+
+#define WM8350_DCDC1_FORCE_PWM                  0xF8
+#define WM8350_DCDC3_FORCE_PWM                  0xFA
+#define WM8350_DCDC4_FORCE_PWM                  0xFB
+#define WM8350_DCDC6_FORCE_PWM                  0xFD
+
+/*
+ * R172 (0xAC) - Current Sink Driver A
+ */
+#define WM8350_CS1_HIB_MODE                     0x1000
+#define WM8350_CS1_HIB_MODE_MASK                0x1000
+#define WM8350_CS1_HIB_MODE_SHIFT                   12
+#define WM8350_CS1_ISEL_MASK                    0x003F
+#define WM8350_CS1_ISEL_SHIFT                        0
+
+/* Bit values for R172 (0xAC) */
+#define WM8350_CS1_HIB_MODE_DISABLE                  0
+#define WM8350_CS1_HIB_MODE_LEAVE                    1
+
+#define WM8350_CS1_ISEL_220M                      0x3F
+
+/*
+ * R173 (0xAD) - CSA Flash control
+ */
+#define WM8350_CS1_FLASH_MODE                   0x8000
+#define WM8350_CS1_TRIGSRC                      0x4000
+#define WM8350_CS1_DRIVE                        0x2000
+#define WM8350_CS1_FLASH_DUR_MASK               0x0300
+#define WM8350_CS1_OFF_RAMP_MASK                0x0030
+#define WM8350_CS1_ON_RAMP_MASK                 0x0003
+
+/*
+ * R174 (0xAE) - Current Sink Driver B
+ */
+#define WM8350_CS2_HIB_MODE                     0x1000
+#define WM8350_CS2_ISEL_MASK                    0x003F
+
+/*
+ * R175 (0xAF) - CSB Flash control
+ */
+#define WM8350_CS2_FLASH_MODE                   0x8000
+#define WM8350_CS2_TRIGSRC                      0x4000
+#define WM8350_CS2_DRIVE                        0x2000
+#define WM8350_CS2_FLASH_DUR_MASK               0x0300
+#define WM8350_CS2_OFF_RAMP_MASK                0x0030
+#define WM8350_CS2_ON_RAMP_MASK                 0x0003
+
+/*
+ * R176 (0xB0) - DCDC/LDO requested
+ */
+#define WM8350_LS_ENA                           0x8000
+#define WM8350_LDO4_ENA                         0x0800
+#define WM8350_LDO3_ENA                         0x0400
+#define WM8350_LDO2_ENA                         0x0200
+#define WM8350_LDO1_ENA                         0x0100
+#define WM8350_DC6_ENA                          0x0020
+#define WM8350_DC5_ENA                          0x0010
+#define WM8350_DC4_ENA                          0x0008
+#define WM8350_DC3_ENA                          0x0004
+#define WM8350_DC2_ENA                          0x0002
+#define WM8350_DC1_ENA                          0x0001
+
+/*
+ * R177 (0xB1) - DCDC Active options
+ */
+#define WM8350_PUTO_MASK                        0x3000
+#define WM8350_PWRUP_DELAY_MASK                 0x0300
+#define WM8350_DC6_ACTIVE                       0x0020
+#define WM8350_DC4_ACTIVE                       0x0008
+#define WM8350_DC3_ACTIVE                       0x0004
+#define WM8350_DC1_ACTIVE                       0x0001
+
+/*
+ * R178 (0xB2) - DCDC Sleep options
+ */
+#define WM8350_DC6_SLEEP                        0x0020
+#define WM8350_DC4_SLEEP                        0x0008
+#define WM8350_DC3_SLEEP                        0x0004
+#define WM8350_DC1_SLEEP                        0x0001
+
+/*
+ * R179 (0xB3) - Power-check comparator
+ */
+#define WM8350_PCCMP_ERRACT                     0x4000
+#define WM8350_PCCMP_RAIL                       0x0100
+#define WM8350_PCCMP_OFF_THR_MASK               0x0070
+#define WM8350_PCCMP_ON_THR_MASK                0x0007
+
+/*
+ * R180 (0xB4) - DCDC1 Control
+ */
+#define WM8350_DC1_OPFLT                        0x0400
+#define WM8350_DC1_VSEL_MASK                    0x007F
+#define WM8350_DC1_VSEL_SHIFT                        0
+
+/*
+ * R181 (0xB5) - DCDC1 Timeouts
+ */
+#define WM8350_DC1_ERRACT_MASK                  0xC000
+#define WM8350_DC1_ERRACT_SHIFT                     14
+#define WM8350_DC1_ENSLOT_MASK                  0x3C00
+#define WM8350_DC1_ENSLOT_SHIFT                     10
+#define WM8350_DC1_SDSLOT_MASK                  0x03C0
+#define WM8350_DC1_UVTO_MASK                    0x0030
+#define WM8350_DC1_SDSLOT_SHIFT                      6
+
+/* Bit values for R181 (0xB5) */
+#define WM8350_DC1_ERRACT_NONE                       0
+#define WM8350_DC1_ERRACT_SHUTDOWN_CONV              1
+#define WM8350_DC1_ERRACT_SHUTDOWN_SYS               2
+
+/*
+ * R182 (0xB6) - DCDC1 Low Power
+ */
+#define WM8350_DC1_HIB_MODE_MASK                0x7000
+#define WM8350_DC1_HIB_TRIG_MASK                0x0300
+#define WM8350_DC1_VIMG_MASK                    0x007F
+
+/*
+ * R183 (0xB7) - DCDC2 Control
+ */
+#define WM8350_DC2_MODE                         0x4000
+#define WM8350_DC2_MODE_MASK                    0x4000
+#define WM8350_DC2_MODE_SHIFT                       14
+#define WM8350_DC2_HIB_MODE                     0x1000
+#define WM8350_DC2_HIB_MODE_MASK                0x1000
+#define WM8350_DC2_HIB_MODE_SHIFT                   12
+#define WM8350_DC2_HIB_TRIG_MASK                0x0300
+#define WM8350_DC2_HIB_TRIG_SHIFT                    8
+#define WM8350_DC2_ILIM                         0x0040
+#define WM8350_DC2_ILIM_MASK                    0x0040
+#define WM8350_DC2_ILIM_SHIFT                        6
+#define WM8350_DC2_RMP_MASK                     0x0018
+#define WM8350_DC2_RMP_SHIFT                         3
+#define WM8350_DC2_FBSRC_MASK                   0x0003
+#define WM8350_DC2_FBSRC_SHIFT                       0
+
+/* Bit values for R183 (0xB7) */
+#define WM8350_DC2_MODE_BOOST                        0
+#define WM8350_DC2_MODE_SWITCH                       1
+
+#define WM8350_DC2_HIB_MODE_ACTIVE                   1
+#define WM8350_DC2_HIB_MODE_DISABLE                  0
+
+#define WM8350_DC2_HIB_TRIG_NONE                     0
+#define WM8350_DC2_HIB_TRIG_LPWR1                    1
+#define WM8350_DC2_HIB_TRIG_LPWR2                    2
+#define WM8350_DC2_HIB_TRIG_LPWR3                    3
+
+#define WM8350_DC2_ILIM_HIGH                         0
+#define WM8350_DC2_ILIM_LOW                          1
+
+#define WM8350_DC2_RMP_30V                           0
+#define WM8350_DC2_RMP_20V                           1
+#define WM8350_DC2_RMP_10V                           2
+#define WM8350_DC2_RMP_5V                            3
+
+#define WM8350_DC2_FBSRC_FB2                         0
+#define WM8350_DC2_FBSRC_ISINKA                      1
+#define WM8350_DC2_FBSRC_ISINKB                      2
+#define WM8350_DC2_FBSRC_USB                         3
+
+/*
+ * R184 (0xB8) - DCDC2 Timeouts
+ */
+#define WM8350_DC2_ERRACT_MASK                  0xC000
+#define WM8350_DC2_ERRACT_SHIFT                     14
+#define WM8350_DC2_ENSLOT_MASK                  0x3C00
+#define WM8350_DC2_ENSLOT_SHIFT                     10
+#define WM8350_DC2_SDSLOT_MASK                  0x03C0
+#define WM8350_DC2_UVTO_MASK                    0x0030
+
+/* Bit values for R184 (0xB8) */
+#define WM8350_DC2_ERRACT_NONE                       0
+#define WM8350_DC2_ERRACT_SHUTDOWN_CONV              1
+#define WM8350_DC2_ERRACT_SHUTDOWN_SYS               2
+
+/*
+ * R186 (0xBA) - DCDC3 Control
+ */
+#define WM8350_DC3_OPFLT                        0x0400
+#define WM8350_DC3_VSEL_MASK                    0x007F
+#define WM8350_DC3_VSEL_SHIFT                        0
+
+/*
+ * R187 (0xBB) - DCDC3 Timeouts
+ */
+#define WM8350_DC3_ERRACT_MASK                  0xC000
+#define WM8350_DC3_ERRACT_SHIFT                     14
+#define WM8350_DC3_ENSLOT_MASK                  0x3C00
+#define WM8350_DC3_ENSLOT_SHIFT                     10
+#define WM8350_DC3_SDSLOT_MASK                  0x03C0
+#define WM8350_DC3_UVTO_MASK                    0x0030
+#define WM8350_DC3_SDSLOT_SHIFT                      6
+
+/* Bit values for R187 (0xBB) */
+#define WM8350_DC3_ERRACT_NONE                       0
+#define WM8350_DC3_ERRACT_SHUTDOWN_CONV              1
+#define WM8350_DC3_ERRACT_SHUTDOWN_SYS               2
+/*
+ * R188 (0xBC) - DCDC3 Low Power
+ */
+#define WM8350_DC3_HIB_MODE_MASK                0x7000
+#define WM8350_DC3_HIB_TRIG_MASK                0x0300
+#define WM8350_DC3_VIMG_MASK                    0x007F
+
+/*
+ * R189 (0xBD) - DCDC4 Control
+ */
+#define WM8350_DC4_OPFLT                        0x0400
+#define WM8350_DC4_VSEL_MASK                    0x007F
+#define WM8350_DC4_VSEL_SHIFT                        0
+
+/*
+ * R190 (0xBE) - DCDC4 Timeouts
+ */
+#define WM8350_DC4_ERRACT_MASK                  0xC000
+#define WM8350_DC4_ERRACT_SHIFT                     14
+#define WM8350_DC4_ENSLOT_MASK                  0x3C00
+#define WM8350_DC4_ENSLOT_SHIFT                     10
+#define WM8350_DC4_SDSLOT_MASK                  0x03C0
+#define WM8350_DC4_UVTO_MASK                    0x0030
+#define WM8350_DC4_SDSLOT_SHIFT                      6
+
+/* Bit values for R190 (0xBE) */
+#define WM8350_DC4_ERRACT_NONE                       0
+#define WM8350_DC4_ERRACT_SHUTDOWN_CONV              1
+#define WM8350_DC4_ERRACT_SHUTDOWN_SYS               2
+
+/*
+ * R191 (0xBF) - DCDC4 Low Power
+ */
+#define WM8350_DC4_HIB_MODE_MASK                0x7000
+#define WM8350_DC4_HIB_TRIG_MASK                0x0300
+#define WM8350_DC4_VIMG_MASK                    0x007F
+
+/*
+ * R192 (0xC0) - DCDC5 Control
+ */
+#define WM8350_DC5_MODE                         0x4000
+#define WM8350_DC5_MODE_MASK                    0x4000
+#define WM8350_DC5_MODE_SHIFT                       14
+#define WM8350_DC5_HIB_MODE                     0x1000
+#define WM8350_DC5_HIB_MODE_MASK                0x1000
+#define WM8350_DC5_HIB_MODE_SHIFT                   12
+#define WM8350_DC5_HIB_TRIG_MASK                0x0300
+#define WM8350_DC5_HIB_TRIG_SHIFT                    8
+#define WM8350_DC5_ILIM                         0x0040
+#define WM8350_DC5_ILIM_MASK                    0x0040
+#define WM8350_DC5_ILIM_SHIFT                        6
+#define WM8350_DC5_RMP_MASK                     0x0018
+#define WM8350_DC5_RMP_SHIFT                         3
+#define WM8350_DC5_FBSRC_MASK                   0x0003
+#define WM8350_DC5_FBSRC_SHIFT                       0
+
+/* Bit values for R192 (0xC0) */
+#define WM8350_DC5_MODE_BOOST                        0
+#define WM8350_DC5_MODE_SWITCH                       1
+
+#define WM8350_DC5_HIB_MODE_ACTIVE                   1
+#define WM8350_DC5_HIB_MODE_DISABLE                  0
+
+#define WM8350_DC5_HIB_TRIG_NONE                     0
+#define WM8350_DC5_HIB_TRIG_LPWR1                    1
+#define WM8350_DC5_HIB_TRIG_LPWR2                    2
+#define WM8350_DC5_HIB_TRIG_LPWR3                    3
+
+#define WM8350_DC5_ILIM_HIGH                         0
+#define WM8350_DC5_ILIM_LOW                          1
+
+#define WM8350_DC5_RMP_30V                           0
+#define WM8350_DC5_RMP_20V                           1
+#define WM8350_DC5_RMP_10V                           2
+#define WM8350_DC5_RMP_5V                            3
+
+#define WM8350_DC5_FBSRC_FB2                         0
+#define WM8350_DC5_FBSRC_ISINKA                      1
+#define WM8350_DC5_FBSRC_ISINKB                      2
+#define WM8350_DC5_FBSRC_USB                         3
+
+/*
+ * R193 (0xC1) - DCDC5 Timeouts
+ */
+#define WM8350_DC5_ERRACT_MASK                  0xC000
+#define WM8350_DC5_ERRACT_SHIFT                     14
+#define WM8350_DC5_ENSLOT_MASK                  0x3C00
+#define WM8350_DC5_ENSLOT_SHIFT                     10
+#define WM8350_DC5_SDSLOT_MASK                  0x03C0
+#define WM8350_DC5_UVTO_MASK                    0x0030
+#define WM8350_DC5_SDSLOT_SHIFT                      6
+
+/* Bit values for R193 (0xC1) */
+#define WM8350_DC5_ERRACT_NONE                       0
+#define WM8350_DC5_ERRACT_SHUTDOWN_CONV              1
+#define WM8350_DC5_ERRACT_SHUTDOWN_SYS               2
+
+/*
+ * R195 (0xC3) - DCDC6 Control
+ */
+#define WM8350_DC6_OPFLT                        0x0400
+#define WM8350_DC6_VSEL_MASK                    0x007F
+#define WM8350_DC6_VSEL_SHIFT                        0
+
+/*
+ * R196 (0xC4) - DCDC6 Timeouts
+ */
+#define WM8350_DC6_ERRACT_MASK                  0xC000
+#define WM8350_DC6_ERRACT_SHIFT                     14
+#define WM8350_DC6_ENSLOT_MASK                  0x3C00
+#define WM8350_DC6_ENSLOT_SHIFT                     10
+#define WM8350_DC6_SDSLOT_MASK                  0x03C0
+#define WM8350_DC6_UVTO_MASK                    0x0030
+#define WM8350_DC6_SDSLOT_SHIFT                      6
+
+/* Bit values for R196 (0xC4) */
+#define WM8350_DC6_ERRACT_NONE                       0
+#define WM8350_DC6_ERRACT_SHUTDOWN_CONV              1
+#define WM8350_DC6_ERRACT_SHUTDOWN_SYS               2
+
+/*
+ * R197 (0xC5) - DCDC6 Low Power
+ */
+#define WM8350_DC6_HIB_MODE_MASK                0x7000
+#define WM8350_DC6_HIB_TRIG_MASK                0x0300
+#define WM8350_DC6_VIMG_MASK                    0x007F
+
+/*
+ * R199 (0xC7) - Limit Switch Control
+ */
+#define WM8350_LS_ERRACT_MASK                   0xC000
+#define WM8350_LS_ERRACT_SHIFT                      14
+#define WM8350_LS_ENSLOT_MASK                   0x3C00
+#define WM8350_LS_ENSLOT_SHIFT                      10
+#define WM8350_LS_SDSLOT_MASK                   0x03C0
+#define WM8350_LS_SDSLOT_SHIFT                       6
+#define WM8350_LS_HIB_MODE                      0x0010
+#define WM8350_LS_HIB_MODE_MASK                 0x0010
+#define WM8350_LS_HIB_MODE_SHIFT                     4
+#define WM8350_LS_HIB_PROT                      0x0002
+#define WM8350_LS_HIB_PROT_MASK                 0x0002
+#define WM8350_LS_HIB_PROT_SHIFT                     1
+#define WM8350_LS_PROT                          0x0001
+#define WM8350_LS_PROT_MASK                     0x0001
+#define WM8350_LS_PROT_SHIFT                         0
+
+/* Bit values for R199 (0xC7) */
+#define WM8350_LS_ERRACT_NONE                       0
+#define WM8350_LS_ERRACT_SHUTDOWN_CONV              1
+#define WM8350_LS_ERRACT_SHUTDOWN_SYS               2
+
+/*
+ * R200 (0xC8) - LDO1 Control
+ */
+#define WM8350_LDO1_SWI                         0x4000
+#define WM8350_LDO1_OPFLT                       0x0400
+#define WM8350_LDO1_VSEL_MASK                   0x001F
+#define WM8350_LDO1_VSEL_SHIFT                       0
+
+/*
+ * R201 (0xC9) - LDO1 Timeouts
+ */
+#define WM8350_LDO1_ERRACT_MASK                 0xC000
+#define WM8350_LDO1_ERRACT_SHIFT                    14
+#define WM8350_LDO1_ENSLOT_MASK                 0x3C00
+#define WM8350_LDO1_ENSLOT_SHIFT                    10
+#define WM8350_LDO1_SDSLOT_MASK                 0x03C0
+#define WM8350_LDO1_UVTO_MASK                   0x0030
+#define WM8350_LDO1_SDSLOT_SHIFT                     6
+
+/* Bit values for R201 (0xC9) */
+#define WM8350_LDO1_ERRACT_NONE                       0
+#define WM8350_LDO1_ERRACT_SHUTDOWN_CONV              1
+#define WM8350_LDO1_ERRACT_SHUTDOWN_SYS               2
+
+/*
+ * R202 (0xCA) - LDO1 Low Power
+ */
+#define WM8350_LDO1_HIB_MODE_MASK               0x3000
+#define WM8350_LDO1_HIB_TRIG_MASK               0x0300
+#define WM8350_LDO1_VIMG_MASK                   0x001F
+#define WM8350_LDO1_HIB_MODE_DIS		(0x1 << 12)
+
+
+/*
+ * R203 (0xCB) - LDO2 Control
+ */
+#define WM8350_LDO2_SWI                         0x4000
+#define WM8350_LDO2_OPFLT                       0x0400
+#define WM8350_LDO2_VSEL_MASK                   0x001F
+#define WM8350_LDO2_VSEL_SHIFT                       0
+
+/*
+ * R204 (0xCC) - LDO2 Timeouts
+ */
+#define WM8350_LDO2_ERRACT_MASK                 0xC000
+#define WM8350_LDO2_ERRACT_SHIFT                    14
+#define WM8350_LDO2_ENSLOT_MASK                 0x3C00
+#define WM8350_LDO2_ENSLOT_SHIFT                    10
+#define WM8350_LDO2_SDSLOT_MASK                 0x03C0
+#define WM8350_LDO2_SDSLOT_SHIFT                     6
+
+/* Bit values for R204 (0xCC) */
+#define WM8350_LDO2_ERRACT_NONE                       0
+#define WM8350_LDO2_ERRACT_SHUTDOWN_CONV              1
+#define WM8350_LDO2_ERRACT_SHUTDOWN_SYS               2
+
+/*
+ * R205 (0xCD) - LDO2 Low Power
+ */
+#define WM8350_LDO2_HIB_MODE_MASK               0x3000
+#define WM8350_LDO2_HIB_TRIG_MASK               0x0300
+#define WM8350_LDO2_VIMG_MASK                   0x001F
+
+/*
+ * R206 (0xCE) - LDO3 Control
+ */
+#define WM8350_LDO3_SWI                         0x4000
+#define WM8350_LDO3_OPFLT                       0x0400
+#define WM8350_LDO3_VSEL_MASK                   0x001F
+#define WM8350_LDO3_VSEL_SHIFT                       0
+
+/*
+ * R207 (0xCF) - LDO3 Timeouts
+ */
+#define WM8350_LDO3_ERRACT_MASK                 0xC000
+#define WM8350_LDO3_ERRACT_SHIFT                    14
+#define WM8350_LDO3_ENSLOT_MASK                 0x3C00
+#define WM8350_LDO3_ENSLOT_SHIFT                    10
+#define WM8350_LDO3_SDSLOT_MASK                 0x03C0
+#define WM8350_LDO3_UVTO_MASK                   0x0030
+#define WM8350_LDO3_SDSLOT_SHIFT                     6
+
+/* Bit values for R207 (0xCF) */
+#define WM8350_LDO3_ERRACT_NONE                       0
+#define WM8350_LDO3_ERRACT_SHUTDOWN_CONV              1
+#define WM8350_LDO3_ERRACT_SHUTDOWN_SYS               2
+
+/*
+ * R208 (0xD0) - LDO3 Low Power
+ */
+#define WM8350_LDO3_HIB_MODE_MASK               0x3000
+#define WM8350_LDO3_HIB_TRIG_MASK               0x0300
+#define WM8350_LDO3_VIMG_MASK                   0x001F
+
+/*
+ * R209 (0xD1) - LDO4 Control
+ */
+#define WM8350_LDO4_SWI                         0x4000
+#define WM8350_LDO4_OPFLT                       0x0400
+#define WM8350_LDO4_VSEL_MASK                   0x001F
+#define WM8350_LDO4_VSEL_SHIFT                       0
+
+/*
+ * R210 (0xD2) - LDO4 Timeouts
+ */
+#define WM8350_LDO4_ERRACT_MASK                 0xC000
+#define WM8350_LDO4_ERRACT_SHIFT                    14
+#define WM8350_LDO4_ENSLOT_MASK                 0x3C00
+#define WM8350_LDO4_ENSLOT_SHIFT                    10
+#define WM8350_LDO4_SDSLOT_MASK                 0x03C0
+#define WM8350_LDO4_UVTO_MASK                   0x0030
+#define WM8350_LDO4_SDSLOT_SHIFT                     6
+
+/* Bit values for R210 (0xD2) */
+#define WM8350_LDO4_ERRACT_NONE                       0
+#define WM8350_LDO4_ERRACT_SHUTDOWN_CONV              1
+#define WM8350_LDO4_ERRACT_SHUTDOWN_SYS               2
+
+/*
+ * R211 (0xD3) - LDO4 Low Power
+ */
+#define WM8350_LDO4_HIB_MODE_MASK               0x3000
+#define WM8350_LDO4_HIB_TRIG_MASK               0x0300
+#define WM8350_LDO4_VIMG_MASK                   0x001F
+
+/*
+ * R215 (0xD7) - VCC_FAULT Masks
+ */
+#define WM8350_LS_FAULT                         0x8000
+#define WM8350_LDO4_FAULT                       0x0800
+#define WM8350_LDO3_FAULT                       0x0400
+#define WM8350_LDO2_FAULT                       0x0200
+#define WM8350_LDO1_FAULT                       0x0100
+#define WM8350_DC6_FAULT                        0x0020
+#define WM8350_DC5_FAULT                        0x0010
+#define WM8350_DC4_FAULT                        0x0008
+#define WM8350_DC3_FAULT                        0x0004
+#define WM8350_DC2_FAULT                        0x0002
+#define WM8350_DC1_FAULT                        0x0001
+
+/*
+ * R216 (0xD8) - Main Bandgap Control
+ */
+#define WM8350_MBG_LOAD_FUSES                   0x8000
+#define WM8350_MBG_FUSE_WPREP                   0x4000
+#define WM8350_MBG_FUSE_WRITE                   0x2000
+#define WM8350_MBG_FUSE_TRIM_MASK               0x1F00
+#define WM8350_MBG_TRIM_SRC                     0x0020
+#define WM8350_MBG_USER_TRIM_MASK               0x001F
+
+/*
+ * R217 (0xD9) - OSC Control
+ */
+#define WM8350_OSC_LOAD_FUSES                   0x8000
+#define WM8350_OSC_FUSE_WPREP                   0x4000
+#define WM8350_OSC_FUSE_WRITE                   0x2000
+#define WM8350_OSC_FUSE_TRIM_MASK               0x0F00
+#define WM8350_OSC_TRIM_SRC                     0x0020
+#define WM8350_OSC_USER_TRIM_MASK               0x000F
+
+/*
+ * R248 (0xF8) - DCDC1 Force PWM
+ */
+#define WM8350_DCDC1_FORCE_PWM_ENA              0x0010
+
+/*
+ * R250 (0xFA) - DCDC3 Force PWM
+ */
+#define WM8350_DCDC3_FORCE_PWM_ENA              0x0010
+
+/*
+ * R251 (0xFB) - DCDC4 Force PWM
+ */
+#define WM8350_DCDC4_FORCE_PWM_ENA              0x0010
+
+/*
+ * R253 (0xFD) - DCDC1 Force PWM
+ */
+#define WM8350_DCDC6_FORCE_PWM_ENA              0x0010
+
+/*
+ * DCDC's
+ */
+#define WM8350_DCDC_1				0
+#define WM8350_DCDC_2				1
+#define WM8350_DCDC_3				2
+#define WM8350_DCDC_4				3
+#define WM8350_DCDC_5				4
+#define WM8350_DCDC_6				5
+
+/* DCDC modes */
+#define WM8350_DCDC_ACTIVE_STANDBY		0
+#define WM8350_DCDC_ACTIVE_PULSE		1
+#define WM8350_DCDC_SLEEP_NORMAL		0
+#define WM8350_DCDC_SLEEP_LOW			1
+
+/* DCDC Low power (Hibernate) mode */
+#define WM8350_DCDC_HIB_MODE_CUR		(0 << 12)
+#define WM8350_DCDC_HIB_MODE_IMAGE		(1 << 12)
+#define WM8350_DCDC_HIB_MODE_STANDBY		(2 << 12)
+#define WM8350_DCDC_HIB_MODE_LDO		(4 << 12)
+#define WM8350_DCDC_HIB_MODE_LDO_IM		(5 << 12)
+#define WM8350_DCDC_HIB_MODE_DIS		(7 << 12)
+#define WM8350_DCDC_HIB_MODE_MASK		(7 << 12)
+
+/* DCDC Low Power (Hibernate) signal */
+#define WM8350_DCDC_HIB_SIG_REG			(0 << 8)
+#define WM8350_DCDC_HIB_SIG_LPWR1		(1 << 8)
+#define WM8350_DCDC_HIB_SIG_LPWR2		(2 << 8)
+#define WM8350_DCDC_HIB_SIG_LPWR3		(3 << 8)
+
+/* LDO Low power (Hibernate) mode */
+#define WM8350_LDO_HIB_MODE_IMAGE		(0 << 0)
+#define WM8350_LDO_HIB_MODE_DIS			(1 << 0)
+
+/* LDO Low Power (Hibernate) signal */
+#define WM8350_LDO_HIB_SIG_REG			(0 << 8)
+#define WM8350_LDO_HIB_SIG_LPWR1		(1 << 8)
+#define WM8350_LDO_HIB_SIG_LPWR2		(2 << 8)
+#define WM8350_LDO_HIB_SIG_LPWR3		(3 << 8)
+
+/*
+ * LDOs
+ */
+#define WM8350_LDO_1				6
+#define WM8350_LDO_2				7
+#define WM8350_LDO_3				8
+#define WM8350_LDO_4				9
+
+/*
+ * ISINKs
+ */
+#define WM8350_ISINK_A				10
+#define WM8350_ISINK_B				11
+
+#define WM8350_ISINK_MODE_BOOST			0
+#define WM8350_ISINK_MODE_SWITCH		1
+#define WM8350_ISINK_ILIM_NORMAL		0
+#define WM8350_ISINK_ILIM_LOW			1
+
+#define WM8350_ISINK_FLASH_DISABLE		0
+#define WM8350_ISINK_FLASH_ENABLE		1
+#define WM8350_ISINK_FLASH_TRIG_BIT		0
+#define WM8350_ISINK_FLASH_TRIG_GPIO		1
+#define WM8350_ISINK_FLASH_MODE_EN		(1 << 13)
+#define WM8350_ISINK_FLASH_MODE_DIS		(0 << 13)
+#define WM8350_ISINK_FLASH_DUR_32MS		(0 << 8)
+#define WM8350_ISINK_FLASH_DUR_64MS		(1 << 8)
+#define WM8350_ISINK_FLASH_DUR_96MS		(2 << 8)
+#define WM8350_ISINK_FLASH_DUR_1024MS		(3 << 8)
+#define WM8350_ISINK_FLASH_ON_INSTANT		(0 << 0)
+#define WM8350_ISINK_FLASH_ON_0_25S		(1 << 0)
+#define WM8350_ISINK_FLASH_ON_0_50S		(2 << 0)
+#define WM8350_ISINK_FLASH_ON_1_00S		(3 << 0)
+#define WM8350_ISINK_FLASH_ON_1_95S		(1 << 0)
+#define WM8350_ISINK_FLASH_ON_3_91S		(2 << 0)
+#define WM8350_ISINK_FLASH_ON_7_80S		(3 << 0)
+#define WM8350_ISINK_FLASH_OFF_INSTANT		(0 << 4)
+#define WM8350_ISINK_FLASH_OFF_0_25S		(1 << 4)
+#define WM8350_ISINK_FLASH_OFF_0_50S		(2 << 4)
+#define WM8350_ISINK_FLASH_OFF_1_00S		(3 << 4)
+#define WM8350_ISINK_FLASH_OFF_1_95S		(1 << 4)
+#define WM8350_ISINK_FLASH_OFF_3_91S		(2 << 4)
+#define WM8350_ISINK_FLASH_OFF_7_80S		(3 << 4)
+
+/*
+ * Regulator Interrupts.
+ */
+#define WM8350_IRQ_CS1				13
+#define WM8350_IRQ_CS2				14
+#define WM8350_IRQ_UV_LDO4			25
+#define WM8350_IRQ_UV_LDO3			26
+#define WM8350_IRQ_UV_LDO2			27
+#define WM8350_IRQ_UV_LDO1			28
+#define WM8350_IRQ_UV_DC6			29
+#define WM8350_IRQ_UV_DC5			30
+#define WM8350_IRQ_UV_DC4			31
+#define WM8350_IRQ_UV_DC3			32
+#define WM8350_IRQ_UV_DC2			33
+#define WM8350_IRQ_UV_DC1			34
+#define WM8350_IRQ_OC_LS			35
+
+#define NUM_WM8350_REGULATORS			12
+
+struct wm8350;
+struct platform_device;
+struct regulator_init_data;
+
+/*
+ * WM8350 LED platform data
+ */
+struct wm8350_led_platform_data {
+	const char *name;
+	const char *default_trigger;
+	int max_uA;
+};
+
+struct wm8350_led {
+	struct platform_device *pdev;
+	struct mutex mutex;
+	struct work_struct work;
+	spinlock_t value_lock;
+	enum led_brightness value;
+	struct led_classdev cdev;
+	int max_uA_index;
+	int enabled;
+
+	struct regulator *isink;
+	struct regulator_consumer_supply isink_consumer;
+	struct regulator_init_data isink_init;
+	struct regulator *dcdc;
+	struct regulator_consumer_supply dcdc_consumer;
+	struct regulator_init_data dcdc_init;
+};
+
+struct wm8350_pmic {
+	/* Number of regulators of each type on this device */
+	int max_dcdc;
+	int max_isink;
+
+	/* ISINK to DCDC mapping */
+	int isink_A_dcdc;
+	int isink_B_dcdc;
+
+	/* hibernate configs */
+	u16 dcdc1_hib_mode;
+	u16 dcdc3_hib_mode;
+	u16 dcdc4_hib_mode;
+	u16 dcdc6_hib_mode;
+
+	/* regulator devices */
+	struct platform_device *pdev[NUM_WM8350_REGULATORS];
+
+	/* LED devices */
+	struct wm8350_led led[2];
+};
+
+int wm8350_register_regulator(struct wm8350 *wm8350, int reg,
+			      struct regulator_init_data *initdata);
+int wm8350_register_led(struct wm8350 *wm8350, int lednum, int dcdc, int isink,
+			struct wm8350_led_platform_data *pdata);
+
+/*
+ * Additional DCDC control not supported via regulator API
+ */
+int wm8350_dcdc_set_slot(struct wm8350 *wm8350, int dcdc, u16 start,
+			 u16 stop, u16 fault);
+int wm8350_dcdc25_set_mode(struct wm8350 *wm8350, int dcdc, u16 mode,
+			   u16 ilim, u16 ramp, u16 feedback);
+
+/*
+ * Additional LDO control not supported via regulator API
+ */
+int wm8350_ldo_set_slot(struct wm8350 *wm8350, int ldo, u16 start, u16 stop);
+
+/*
+ * Additional ISINK control not supported via regulator API
+ */
+int wm8350_isink_set_flash(struct wm8350 *wm8350, int isink, u16 mode,
+			   u16 trigger, u16 duration, u16 on_ramp,
+			   u16 off_ramp, u16 drive);
+
+#endif
diff --git a/include/linux/mfd/wm8350/rtc.h b/include/linux/mfd/wm8350/rtc.h
new file mode 100644
index 00000000..ebd72ffc
--- /dev/null
+++ b/include/linux/mfd/wm8350/rtc.h
@@ -0,0 +1,269 @@
+/*
+ * rtc.h  --  RTC driver for Wolfson WM8350 PMIC
+ *
+ * Copyright 2007 Wolfson Microelectronics PLC
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef __LINUX_MFD_WM8350_RTC_H
+#define __LINUX_MFD_WM8350_RTC_H
+
+#include <linux/platform_device.h>
+
+/*
+ * Register values.
+ */
+#define WM8350_RTC_SECONDS_MINUTES              0x10
+#define WM8350_RTC_HOURS_DAY                    0x11
+#define WM8350_RTC_DATE_MONTH                   0x12
+#define WM8350_RTC_YEAR                         0x13
+#define WM8350_ALARM_SECONDS_MINUTES            0x14
+#define WM8350_ALARM_HOURS_DAY                  0x15
+#define WM8350_ALARM_DATE_MONTH                 0x16
+#define WM8350_RTC_TIME_CONTROL                 0x17
+
+/*
+ * R16 (0x10) - RTC Seconds/Minutes
+ */
+#define WM8350_RTC_MINS_MASK                    0x7F00
+#define WM8350_RTC_MINS_SHIFT                        8
+#define WM8350_RTC_SECS_MASK                    0x007F
+#define WM8350_RTC_SECS_SHIFT                        0
+
+/*
+ * R17 (0x11) - RTC Hours/Day
+ */
+#define WM8350_RTC_DAY_MASK                     0x0700
+#define WM8350_RTC_DAY_SHIFT                         8
+#define WM8350_RTC_HPM_MASK                     0x0020
+#define WM8350_RTC_HPM_SHIFT                         5
+#define WM8350_RTC_HRS_MASK                     0x001F
+#define WM8350_RTC_HRS_SHIFT                         0
+
+/* Bit values for R21 (0x15) */
+#define WM8350_RTC_DAY_SUN                           1
+#define WM8350_RTC_DAY_MON                           2
+#define WM8350_RTC_DAY_TUE                           3
+#define WM8350_RTC_DAY_WED                           4
+#define WM8350_RTC_DAY_THU                           5
+#define WM8350_RTC_DAY_FRI                           6
+#define WM8350_RTC_DAY_SAT                           7
+
+#define WM8350_RTC_HPM_AM                            0
+#define WM8350_RTC_HPM_PM                            1
+
+/*
+ * R18 (0x12) - RTC Date/Month
+ */
+#define WM8350_RTC_MTH_MASK                     0x1F00
+#define WM8350_RTC_MTH_SHIFT                         8
+#define WM8350_RTC_DATE_MASK                    0x003F
+#define WM8350_RTC_DATE_SHIFT                        0
+
+/* Bit values for R22 (0x16) */
+#define WM8350_RTC_MTH_JAN                           1
+#define WM8350_RTC_MTH_FEB                           2
+#define WM8350_RTC_MTH_MAR                           3
+#define WM8350_RTC_MTH_APR                           4
+#define WM8350_RTC_MTH_MAY                           5
+#define WM8350_RTC_MTH_JUN                           6
+#define WM8350_RTC_MTH_JUL                           7
+#define WM8350_RTC_MTH_AUG                           8
+#define WM8350_RTC_MTH_SEP                           9
+#define WM8350_RTC_MTH_OCT                          10
+#define WM8350_RTC_MTH_NOV                          11
+#define WM8350_RTC_MTH_DEC                          12
+#define WM8350_RTC_MTH_JAN_BCD                    0x01
+#define WM8350_RTC_MTH_FEB_BCD                    0x02
+#define WM8350_RTC_MTH_MAR_BCD                    0x03
+#define WM8350_RTC_MTH_APR_BCD                    0x04
+#define WM8350_RTC_MTH_MAY_BCD                    0x05
+#define WM8350_RTC_MTH_JUN_BCD                    0x06
+#define WM8350_RTC_MTH_JUL_BCD                    0x07
+#define WM8350_RTC_MTH_AUG_BCD                    0x08
+#define WM8350_RTC_MTH_SEP_BCD                    0x09
+#define WM8350_RTC_MTH_OCT_BCD                    0x10
+#define WM8350_RTC_MTH_NOV_BCD                    0x11
+#define WM8350_RTC_MTH_DEC_BCD                    0x12
+
+/*
+ * R19 (0x13) - RTC Year
+ */
+#define WM8350_RTC_YHUNDREDS_MASK               0x3F00
+#define WM8350_RTC_YHUNDREDS_SHIFT                   8
+#define WM8350_RTC_YUNITS_MASK                  0x00FF
+#define WM8350_RTC_YUNITS_SHIFT                      0
+
+/*
+ * R20 (0x14) - Alarm Seconds/Minutes
+ */
+#define WM8350_RTC_ALMMINS_MASK                 0x7F00
+#define WM8350_RTC_ALMMINS_SHIFT                     8
+#define WM8350_RTC_ALMSECS_MASK                 0x007F
+#define WM8350_RTC_ALMSECS_SHIFT                     0
+
+/* Bit values for R20 (0x14) */
+#define WM8350_RTC_ALMMINS_DONT_CARE                -1
+#define WM8350_RTC_ALMSECS_DONT_CARE                -1
+
+/*
+ * R21 (0x15) - Alarm Hours/Day
+ */
+#define WM8350_RTC_ALMDAY_MASK                  0x0F00
+#define WM8350_RTC_ALMDAY_SHIFT                      8
+#define WM8350_RTC_ALMHPM_MASK                  0x0020
+#define WM8350_RTC_ALMHPM_SHIFT                      5
+#define WM8350_RTC_ALMHRS_MASK                  0x001F
+#define WM8350_RTC_ALMHRS_SHIFT                      0
+
+/* Bit values for R21 (0x15) */
+#define WM8350_RTC_ALMDAY_DONT_CARE                 -1
+#define WM8350_RTC_ALMDAY_SUN                        1
+#define WM8350_RTC_ALMDAY_MON                        2
+#define WM8350_RTC_ALMDAY_TUE                        3
+#define WM8350_RTC_ALMDAY_WED                        4
+#define WM8350_RTC_ALMDAY_THU                        5
+#define WM8350_RTC_ALMDAY_FRI                        6
+#define WM8350_RTC_ALMDAY_SAT                        7
+
+#define WM8350_RTC_ALMHPM_AM                         0
+#define WM8350_RTC_ALMHPM_PM                         1
+
+#define WM8350_RTC_ALMHRS_DONT_CARE                 -1
+
+/*
+ * R22 (0x16) - Alarm Date/Month
+ */
+#define WM8350_RTC_ALMMTH_MASK                  0x1F00
+#define WM8350_RTC_ALMMTH_SHIFT                      8
+#define WM8350_RTC_ALMDATE_MASK                 0x003F
+#define WM8350_RTC_ALMDATE_SHIFT                     0
+
+/* Bit values for R22 (0x16) */
+#define WM8350_RTC_ALMDATE_DONT_CARE                -1
+
+#define WM8350_RTC_ALMMTH_DONT_CARE                 -1
+#define WM8350_RTC_ALMMTH_JAN                        1
+#define WM8350_RTC_ALMMTH_FEB                        2
+#define WM8350_RTC_ALMMTH_MAR                        3
+#define WM8350_RTC_ALMMTH_APR                        4
+#define WM8350_RTC_ALMMTH_MAY                        5
+#define WM8350_RTC_ALMMTH_JUN                        6
+#define WM8350_RTC_ALMMTH_JUL                        7
+#define WM8350_RTC_ALMMTH_AUG                        8
+#define WM8350_RTC_ALMMTH_SEP                        9
+#define WM8350_RTC_ALMMTH_OCT                       10
+#define WM8350_RTC_ALMMTH_NOV                       11
+#define WM8350_RTC_ALMMTH_DEC                       12
+#define WM8350_RTC_ALMMTH_JAN_BCD                 0x01
+#define WM8350_RTC_ALMMTH_FEB_BCD                 0x02
+#define WM8350_RTC_ALMMTH_MAR_BCD                 0x03
+#define WM8350_RTC_ALMMTH_APR_BCD                 0x04
+#define WM8350_RTC_ALMMTH_MAY_BCD                 0x05
+#define WM8350_RTC_ALMMTH_JUN_BCD                 0x06
+#define WM8350_RTC_ALMMTH_JUL_BCD                 0x07
+#define WM8350_RTC_ALMMTH_AUG_BCD                 0x08
+#define WM8350_RTC_ALMMTH_SEP_BCD                 0x09
+#define WM8350_RTC_ALMMTH_OCT_BCD                 0x10
+#define WM8350_RTC_ALMMTH_NOV_BCD                 0x11
+#define WM8350_RTC_ALMMTH_DEC_BCD                 0x12
+
+/*
+ * R23 (0x17) - RTC Time Control
+ */
+#define WM8350_RTC_BCD                          0x8000
+#define WM8350_RTC_BCD_MASK                     0x8000
+#define WM8350_RTC_BCD_SHIFT                        15
+#define WM8350_RTC_12HR                         0x4000
+#define WM8350_RTC_12HR_MASK                    0x4000
+#define WM8350_RTC_12HR_SHIFT                       14
+#define WM8350_RTC_DST                          0x2000
+#define WM8350_RTC_DST_MASK                     0x2000
+#define WM8350_RTC_DST_SHIFT                        13
+#define WM8350_RTC_SET                          0x0800
+#define WM8350_RTC_SET_MASK                     0x0800
+#define WM8350_RTC_SET_SHIFT                        11
+#define WM8350_RTC_STS                          0x0400
+#define WM8350_RTC_STS_MASK                     0x0400
+#define WM8350_RTC_STS_SHIFT                        10
+#define WM8350_RTC_ALMSET                       0x0200
+#define WM8350_RTC_ALMSET_MASK                  0x0200
+#define WM8350_RTC_ALMSET_SHIFT                      9
+#define WM8350_RTC_ALMSTS                       0x0100
+#define WM8350_RTC_ALMSTS_MASK                  0x0100
+#define WM8350_RTC_ALMSTS_SHIFT                      8
+#define WM8350_RTC_PINT                         0x0070
+#define WM8350_RTC_PINT_MASK                    0x0070
+#define WM8350_RTC_PINT_SHIFT                        4
+#define WM8350_RTC_DSW                          0x000F
+#define WM8350_RTC_DSW_MASK                     0x000F
+#define WM8350_RTC_DSW_SHIFT                         0
+
+/* Bit values for R23 (0x17) */
+#define WM8350_RTC_BCD_BINARY                        0
+#define WM8350_RTC_BCD_BCD                           1
+
+#define WM8350_RTC_12HR_24HR                         0
+#define WM8350_RTC_12HR_12HR                         1
+
+#define WM8350_RTC_DST_DISABLED                      0
+#define WM8350_RTC_DST_ENABLED                       1
+
+#define WM8350_RTC_SET_RUN                           0
+#define WM8350_RTC_SET_SET                           1
+
+#define WM8350_RTC_STS_RUNNING                       0
+#define WM8350_RTC_STS_STOPPED                       1
+
+#define WM8350_RTC_ALMSET_RUN                        0
+#define WM8350_RTC_ALMSET_SET                        1
+
+#define WM8350_RTC_ALMSTS_RUNNING                    0
+#define WM8350_RTC_ALMSTS_STOPPED                    1
+
+#define WM8350_RTC_PINT_DISABLED                     0
+#define WM8350_RTC_PINT_SECS                         1
+#define WM8350_RTC_PINT_MINS                         2
+#define WM8350_RTC_PINT_HRS                          3
+#define WM8350_RTC_PINT_DAYS                         4
+#define WM8350_RTC_PINT_MTHS                         5
+
+#define WM8350_RTC_DSW_DISABLED                      0
+#define WM8350_RTC_DSW_1HZ                           1
+#define WM8350_RTC_DSW_2HZ                           2
+#define WM8350_RTC_DSW_4HZ                           3
+#define WM8350_RTC_DSW_8HZ                           4
+#define WM8350_RTC_DSW_16HZ                          5
+#define WM8350_RTC_DSW_32HZ                          6
+#define WM8350_RTC_DSW_64HZ                          7
+#define WM8350_RTC_DSW_128HZ                         8
+#define WM8350_RTC_DSW_256HZ                         9
+#define WM8350_RTC_DSW_512HZ                        10
+#define WM8350_RTC_DSW_1024HZ                       11
+
+/*
+ * R218 (0xDA) - RTC Tick Control
+ */
+#define WM8350_RTC_TICKSTS                      0x4000
+#define WM8350_RTC_CLKSRC                       0x2000
+#define WM8350_RTC_TRIM_MASK                    0x03FF
+
+/*
+ * RTC Interrupts.
+ */
+#define WM8350_IRQ_RTC_PER			7
+#define WM8350_IRQ_RTC_SEC			8
+#define WM8350_IRQ_RTC_ALM			9
+
+struct wm8350_rtc {
+	struct platform_device *pdev;
+	struct rtc_device *rtc;
+	int alarm_enabled;      /* used over suspend/resume */
+	int update_enabled;
+};
+
+#endif
diff --git a/include/linux/mfd/wm8350/supply.h b/include/linux/mfd/wm8350/supply.h
new file mode 100644
index 00000000..2b947931
--- /dev/null
+++ b/include/linux/mfd/wm8350/supply.h
@@ -0,0 +1,134 @@
+/*
+ * supply.h  --  Power Supply Driver for Wolfson WM8350 PMIC
+ *
+ * Copyright 2007 Wolfson Microelectronics PLC
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __LINUX_MFD_WM8350_SUPPLY_H_
+#define __LINUX_MFD_WM8350_SUPPLY_H_
+
+#include <linux/mutex.h>
+#include <linux/power_supply.h>
+
+/*
+ * Charger registers
+ */
+#define WM8350_BATTERY_CHARGER_CONTROL_1        0xA8
+#define WM8350_BATTERY_CHARGER_CONTROL_2        0xA9
+#define WM8350_BATTERY_CHARGER_CONTROL_3        0xAA
+
+/*
+ * R168 (0xA8) - Battery Charger Control 1
+ */
+#define WM8350_CHG_ENA_R168                     0x8000
+#define WM8350_CHG_THR                          0x2000
+#define WM8350_CHG_EOC_SEL_MASK                 0x1C00
+#define WM8350_CHG_TRICKLE_TEMP_CHOKE           0x0200
+#define WM8350_CHG_TRICKLE_USB_CHOKE            0x0100
+#define WM8350_CHG_RECOVER_T                    0x0080
+#define WM8350_CHG_END_ACT                      0x0040
+#define WM8350_CHG_FAST                         0x0020
+#define WM8350_CHG_FAST_USB_THROTTLE            0x0010
+#define WM8350_CHG_NTC_MON                      0x0008
+#define WM8350_CHG_BATT_HOT_MON                 0x0004
+#define WM8350_CHG_BATT_COLD_MON                0x0002
+#define WM8350_CHG_CHIP_TEMP_MON                0x0001
+
+/*
+ * R169 (0xA9) - Battery Charger Control 2
+ */
+#define WM8350_CHG_ACTIVE                       0x8000
+#define WM8350_CHG_PAUSE                        0x4000
+#define WM8350_CHG_STS_MASK                     0x3000
+#define WM8350_CHG_TIME_MASK                    0x0F00
+#define WM8350_CHG_MASK_WALL_FB                 0x0080
+#define WM8350_CHG_TRICKLE_SEL                  0x0040
+#define WM8350_CHG_VSEL_MASK                    0x0030
+#define WM8350_CHG_ISEL_MASK                    0x000F
+#define WM8350_CHG_STS_OFF                      0x0000
+#define WM8350_CHG_STS_TRICKLE                  0x1000
+#define WM8350_CHG_STS_FAST                     0x2000
+
+/*
+ * R170 (0xAA) - Battery Charger Control 3
+ */
+#define WM8350_CHG_THROTTLE_T_MASK              0x0060
+#define WM8350_CHG_SMART                        0x0010
+#define WM8350_CHG_TIMER_ADJT_MASK              0x000F
+
+/*
+ * Charger Interrupts
+ */
+#define WM8350_IRQ_CHG_BAT_HOT			0
+#define WM8350_IRQ_CHG_BAT_COLD			1
+#define WM8350_IRQ_CHG_BAT_FAIL			2
+#define WM8350_IRQ_CHG_TO			3
+#define WM8350_IRQ_CHG_END			4
+#define WM8350_IRQ_CHG_START			5
+#define WM8350_IRQ_CHG_FAST_RDY			6
+#define WM8350_IRQ_CHG_VBATT_LT_3P9		10
+#define WM8350_IRQ_CHG_VBATT_LT_3P1		11
+#define WM8350_IRQ_CHG_VBATT_LT_2P85		12
+
+/*
+ * Charger Policy
+ */
+#define WM8350_CHG_TRICKLE_50mA			(0 << 6)
+#define WM8350_CHG_TRICKLE_100mA		(1 << 6)
+#define WM8350_CHG_4_05V			(0 << 4)
+#define WM8350_CHG_4_10V			(1 << 4)
+#define WM8350_CHG_4_15V			(2 << 4)
+#define WM8350_CHG_4_20V			(3 << 4)
+#define WM8350_CHG_FAST_LIMIT_mA(x)		((x / 50) & 0xf)
+#define WM8350_CHG_EOC_mA(x)			(((x - 10) & 0x7) << 10)
+#define WM8350_CHG_TRICKLE_3_1V			(0 << 13)
+#define WM8350_CHG_TRICKLE_3_9V			(1 << 13)
+
+/*
+ * Supply Registers.
+ */
+#define WM8350_USB_VOLTAGE_READBACK             0x9C
+#define WM8350_LINE_VOLTAGE_READBACK            0x9D
+#define WM8350_BATT_VOLTAGE_READBACK            0x9E
+
+/*
+ * Supply Interrupts.
+ */
+#define WM8350_IRQ_USB_LIMIT			15
+#define WM8350_IRQ_EXT_USB_FB			36
+#define WM8350_IRQ_EXT_WALL_FB			37
+#define WM8350_IRQ_EXT_BAT_FB			38
+
+/*
+ * Policy to control charger state machine.
+ */
+struct wm8350_charger_policy {
+
+	/* charger state machine policy  - set in machine driver */
+	int eoc_mA;		/* end of charge current (mA)  */
+	int charge_mV;		/* charge voltage */
+	int fast_limit_mA;	/* fast charge current limit */
+	int fast_limit_USB_mA;	/* USB fast charge current limit */
+	int charge_timeout;	/* charge timeout (mins) */
+	int trickle_start_mV;	/* trickle charge starts at mV */
+	int trickle_charge_mA;	/* trickle charge current */
+	int trickle_charge_USB_mA;	/* USB trickle charge current */
+};
+
+struct wm8350_power {
+	struct platform_device *pdev;
+	struct power_supply battery;
+	struct power_supply usb;
+	struct power_supply ac;
+	struct wm8350_charger_policy *policy;
+
+	int rev_g_coeff;
+};
+
+#endif
diff --git a/include/linux/mfd/wm8350/wdt.h b/include/linux/mfd/wm8350/wdt.h
new file mode 100644
index 00000000..f6135b5e
--- /dev/null
+++ b/include/linux/mfd/wm8350/wdt.h
@@ -0,0 +1,28 @@
+/*
+ * wdt.h  --  Watchdog Driver for Wolfson WM8350 PMIC
+ *
+ * Copyright 2007, 2008 Wolfson Microelectronics PLC
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef __LINUX_MFD_WM8350_WDT_H_
+#define __LINUX_MFD_WM8350_WDT_H_
+
+#include <linux/platform_device.h>
+
+#define WM8350_WDOG_HIB_MODE                    0x0080
+#define WM8350_WDOG_DEBUG                       0x0040
+#define WM8350_WDOG_MODE_MASK                   0x0030
+#define WM8350_WDOG_TO_MASK                     0x0007
+
+#define WM8350_IRQ_SYS_WDOG_TO			24
+
+struct wm8350_wdt {
+	struct platform_device *pdev;
+};
+
+#endif
diff --git a/include/linux/mfd/wm8400-audio.h b/include/linux/mfd/wm8400-audio.h
new file mode 100644
index 00000000..e06ed3eb
--- /dev/null
+++ b/include/linux/mfd/wm8400-audio.h
@@ -0,0 +1,1187 @@
+/*
+ * wm8400 private definitions for audio
+ *
+ * Copyright 2008 Wolfson Microelectronics plc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_MFD_WM8400_AUDIO_H
+#define __LINUX_MFD_WM8400_AUDIO_H
+
+#include <linux/mfd/wm8400-audio.h>
+
+/*
+ * R2 (0x02) - Power Management (1)
+ */
+#define WM8400_CODEC_ENA                        0x8000  /* CODEC_ENA */
+#define WM8400_CODEC_ENA_MASK                   0x8000  /* CODEC_ENA */
+#define WM8400_CODEC_ENA_SHIFT                      15  /* CODEC_ENA */
+#define WM8400_CODEC_ENA_WIDTH                       1  /* CODEC_ENA */
+#define WM8400_SYSCLK_ENA                       0x4000  /* SYSCLK_ENA */
+#define WM8400_SYSCLK_ENA_MASK                  0x4000  /* SYSCLK_ENA */
+#define WM8400_SYSCLK_ENA_SHIFT                     14  /* SYSCLK_ENA */
+#define WM8400_SYSCLK_ENA_WIDTH                      1  /* SYSCLK_ENA */
+#define WM8400_SPK_MIX_ENA                      0x2000  /* SPK_MIX_ENA */
+#define WM8400_SPK_MIX_ENA_MASK                 0x2000  /* SPK_MIX_ENA */
+#define WM8400_SPK_MIX_ENA_SHIFT                    13  /* SPK_MIX_ENA */
+#define WM8400_SPK_MIX_ENA_WIDTH                     1  /* SPK_MIX_ENA */
+#define WM8400_SPK_ENA                          0x1000  /* SPK_ENA */
+#define WM8400_SPK_ENA_MASK                     0x1000  /* SPK_ENA */
+#define WM8400_SPK_ENA_SHIFT                        12  /* SPK_ENA */
+#define WM8400_SPK_ENA_WIDTH                         1  /* SPK_ENA */
+#define WM8400_OUT3_ENA                         0x0800  /* OUT3_ENA */
+#define WM8400_OUT3_ENA_MASK                    0x0800  /* OUT3_ENA */
+#define WM8400_OUT3_ENA_SHIFT                       11  /* OUT3_ENA */
+#define WM8400_OUT3_ENA_WIDTH                        1  /* OUT3_ENA */
+#define WM8400_OUT4_ENA                         0x0400  /* OUT4_ENA */
+#define WM8400_OUT4_ENA_MASK                    0x0400  /* OUT4_ENA */
+#define WM8400_OUT4_ENA_SHIFT                       10  /* OUT4_ENA */
+#define WM8400_OUT4_ENA_WIDTH                        1  /* OUT4_ENA */
+#define WM8400_LOUT_ENA                         0x0200  /* LOUT_ENA */
+#define WM8400_LOUT_ENA_MASK                    0x0200  /* LOUT_ENA */
+#define WM8400_LOUT_ENA_SHIFT                        9  /* LOUT_ENA */
+#define WM8400_LOUT_ENA_WIDTH                        1  /* LOUT_ENA */
+#define WM8400_ROUT_ENA                         0x0100  /* ROUT_ENA */
+#define WM8400_ROUT_ENA_MASK                    0x0100  /* ROUT_ENA */
+#define WM8400_ROUT_ENA_SHIFT                        8  /* ROUT_ENA */
+#define WM8400_ROUT_ENA_WIDTH                        1  /* ROUT_ENA */
+#define WM8400_MIC1BIAS_ENA                     0x0010  /* MIC1BIAS_ENA */
+#define WM8400_MIC1BIAS_ENA_MASK                0x0010  /* MIC1BIAS_ENA */
+#define WM8400_MIC1BIAS_ENA_SHIFT                    4  /* MIC1BIAS_ENA */
+#define WM8400_MIC1BIAS_ENA_WIDTH                    1  /* MIC1BIAS_ENA */
+#define WM8400_VMID_MODE_MASK                   0x0006  /* VMID_MODE - [2:1] */
+#define WM8400_VMID_MODE_SHIFT                       1  /* VMID_MODE - [2:1] */
+#define WM8400_VMID_MODE_WIDTH                       2  /* VMID_MODE - [2:1] */
+#define WM8400_VREF_ENA                         0x0001  /* VREF_ENA */
+#define WM8400_VREF_ENA_MASK                    0x0001  /* VREF_ENA */
+#define WM8400_VREF_ENA_SHIFT                        0  /* VREF_ENA */
+#define WM8400_VREF_ENA_WIDTH                        1  /* VREF_ENA */
+
+/*
+ * R3 (0x03) - Power Management (2)
+ */
+#define WM8400_FLL_ENA                          0x8000  /* FLL_ENA */
+#define WM8400_FLL_ENA_MASK                     0x8000  /* FLL_ENA */
+#define WM8400_FLL_ENA_SHIFT                        15  /* FLL_ENA */
+#define WM8400_FLL_ENA_WIDTH                         1  /* FLL_ENA */
+#define WM8400_TSHUT_ENA                        0x4000  /* TSHUT_ENA */
+#define WM8400_TSHUT_ENA_MASK                   0x4000  /* TSHUT_ENA */
+#define WM8400_TSHUT_ENA_SHIFT                      14  /* TSHUT_ENA */
+#define WM8400_TSHUT_ENA_WIDTH                       1  /* TSHUT_ENA */
+#define WM8400_TSHUT_OPDIS                      0x2000  /* TSHUT_OPDIS */
+#define WM8400_TSHUT_OPDIS_MASK                 0x2000  /* TSHUT_OPDIS */
+#define WM8400_TSHUT_OPDIS_SHIFT                    13  /* TSHUT_OPDIS */
+#define WM8400_TSHUT_OPDIS_WIDTH                     1  /* TSHUT_OPDIS */
+#define WM8400_OPCLK_ENA                        0x0800  /* OPCLK_ENA */
+#define WM8400_OPCLK_ENA_MASK                   0x0800  /* OPCLK_ENA */
+#define WM8400_OPCLK_ENA_SHIFT                      11  /* OPCLK_ENA */
+#define WM8400_OPCLK_ENA_WIDTH                       1  /* OPCLK_ENA */
+#define WM8400_AINL_ENA                         0x0200  /* AINL_ENA */
+#define WM8400_AINL_ENA_MASK                    0x0200  /* AINL_ENA */
+#define WM8400_AINL_ENA_SHIFT                        9  /* AINL_ENA */
+#define WM8400_AINL_ENA_WIDTH                        1  /* AINL_ENA */
+#define WM8400_AINR_ENA                         0x0100  /* AINR_ENA */
+#define WM8400_AINR_ENA_MASK                    0x0100  /* AINR_ENA */
+#define WM8400_AINR_ENA_SHIFT                        8  /* AINR_ENA */
+#define WM8400_AINR_ENA_WIDTH                        1  /* AINR_ENA */
+#define WM8400_LIN34_ENA                        0x0080  /* LIN34_ENA */
+#define WM8400_LIN34_ENA_MASK                   0x0080  /* LIN34_ENA */
+#define WM8400_LIN34_ENA_SHIFT                       7  /* LIN34_ENA */
+#define WM8400_LIN34_ENA_WIDTH                       1  /* LIN34_ENA */
+#define WM8400_LIN12_ENA                        0x0040  /* LIN12_ENA */
+#define WM8400_LIN12_ENA_MASK                   0x0040  /* LIN12_ENA */
+#define WM8400_LIN12_ENA_SHIFT                       6  /* LIN12_ENA */
+#define WM8400_LIN12_ENA_WIDTH                       1  /* LIN12_ENA */
+#define WM8400_RIN34_ENA                        0x0020  /* RIN34_ENA */
+#define WM8400_RIN34_ENA_MASK                   0x0020  /* RIN34_ENA */
+#define WM8400_RIN34_ENA_SHIFT                       5  /* RIN34_ENA */
+#define WM8400_RIN34_ENA_WIDTH                       1  /* RIN34_ENA */
+#define WM8400_RIN12_ENA                        0x0010  /* RIN12_ENA */
+#define WM8400_RIN12_ENA_MASK                   0x0010  /* RIN12_ENA */
+#define WM8400_RIN12_ENA_SHIFT                       4  /* RIN12_ENA */
+#define WM8400_RIN12_ENA_WIDTH                       1  /* RIN12_ENA */
+#define WM8400_ADCL_ENA                         0x0002  /* ADCL_ENA */
+#define WM8400_ADCL_ENA_MASK                    0x0002  /* ADCL_ENA */
+#define WM8400_ADCL_ENA_SHIFT                        1  /* ADCL_ENA */
+#define WM8400_ADCL_ENA_WIDTH                        1  /* ADCL_ENA */
+#define WM8400_ADCR_ENA                         0x0001  /* ADCR_ENA */
+#define WM8400_ADCR_ENA_MASK                    0x0001  /* ADCR_ENA */
+#define WM8400_ADCR_ENA_SHIFT                        0  /* ADCR_ENA */
+#define WM8400_ADCR_ENA_WIDTH                        1  /* ADCR_ENA */
+
+/*
+ * R4 (0x04) - Power Management (3)
+ */
+#define WM8400_LON_ENA                          0x2000  /* LON_ENA */
+#define WM8400_LON_ENA_MASK                     0x2000  /* LON_ENA */
+#define WM8400_LON_ENA_SHIFT                        13  /* LON_ENA */
+#define WM8400_LON_ENA_WIDTH                         1  /* LON_ENA */
+#define WM8400_LOP_ENA                          0x1000  /* LOP_ENA */
+#define WM8400_LOP_ENA_MASK                     0x1000  /* LOP_ENA */
+#define WM8400_LOP_ENA_SHIFT                        12  /* LOP_ENA */
+#define WM8400_LOP_ENA_WIDTH                         1  /* LOP_ENA */
+#define WM8400_RON_ENA                          0x0800  /* RON_ENA */
+#define WM8400_RON_ENA_MASK                     0x0800  /* RON_ENA */
+#define WM8400_RON_ENA_SHIFT                        11  /* RON_ENA */
+#define WM8400_RON_ENA_WIDTH                         1  /* RON_ENA */
+#define WM8400_ROP_ENA                          0x0400  /* ROP_ENA */
+#define WM8400_ROP_ENA_MASK                     0x0400  /* ROP_ENA */
+#define WM8400_ROP_ENA_SHIFT                        10  /* ROP_ENA */
+#define WM8400_ROP_ENA_WIDTH                         1  /* ROP_ENA */
+#define WM8400_LOPGA_ENA                        0x0080  /* LOPGA_ENA */
+#define WM8400_LOPGA_ENA_MASK                   0x0080  /* LOPGA_ENA */
+#define WM8400_LOPGA_ENA_SHIFT                       7  /* LOPGA_ENA */
+#define WM8400_LOPGA_ENA_WIDTH                       1  /* LOPGA_ENA */
+#define WM8400_ROPGA_ENA                        0x0040  /* ROPGA_ENA */
+#define WM8400_ROPGA_ENA_MASK                   0x0040  /* ROPGA_ENA */
+#define WM8400_ROPGA_ENA_SHIFT                       6  /* ROPGA_ENA */
+#define WM8400_ROPGA_ENA_WIDTH                       1  /* ROPGA_ENA */
+#define WM8400_LOMIX_ENA                        0x0020  /* LOMIX_ENA */
+#define WM8400_LOMIX_ENA_MASK                   0x0020  /* LOMIX_ENA */
+#define WM8400_LOMIX_ENA_SHIFT                       5  /* LOMIX_ENA */
+#define WM8400_LOMIX_ENA_WIDTH                       1  /* LOMIX_ENA */
+#define WM8400_ROMIX_ENA                        0x0010  /* ROMIX_ENA */
+#define WM8400_ROMIX_ENA_MASK                   0x0010  /* ROMIX_ENA */
+#define WM8400_ROMIX_ENA_SHIFT                       4  /* ROMIX_ENA */
+#define WM8400_ROMIX_ENA_WIDTH                       1  /* ROMIX_ENA */
+#define WM8400_DACL_ENA                         0x0002  /* DACL_ENA */
+#define WM8400_DACL_ENA_MASK                    0x0002  /* DACL_ENA */
+#define WM8400_DACL_ENA_SHIFT                        1  /* DACL_ENA */
+#define WM8400_DACL_ENA_WIDTH                        1  /* DACL_ENA */
+#define WM8400_DACR_ENA                         0x0001  /* DACR_ENA */
+#define WM8400_DACR_ENA_MASK                    0x0001  /* DACR_ENA */
+#define WM8400_DACR_ENA_SHIFT                        0  /* DACR_ENA */
+#define WM8400_DACR_ENA_WIDTH                        1  /* DACR_ENA */
+
+/*
+ * R5 (0x05) - Audio Interface (1)
+ */
+#define WM8400_AIFADCL_SRC                      0x8000  /* AIFADCL_SRC */
+#define WM8400_AIFADCL_SRC_MASK                 0x8000  /* AIFADCL_SRC */
+#define WM8400_AIFADCL_SRC_SHIFT                    15  /* AIFADCL_SRC */
+#define WM8400_AIFADCL_SRC_WIDTH                     1  /* AIFADCL_SRC */
+#define WM8400_AIFADCR_SRC                      0x4000  /* AIFADCR_SRC */
+#define WM8400_AIFADCR_SRC_MASK                 0x4000  /* AIFADCR_SRC */
+#define WM8400_AIFADCR_SRC_SHIFT                    14  /* AIFADCR_SRC */
+#define WM8400_AIFADCR_SRC_WIDTH                     1  /* AIFADCR_SRC */
+#define WM8400_AIFADC_TDM                       0x2000  /* AIFADC_TDM */
+#define WM8400_AIFADC_TDM_MASK                  0x2000  /* AIFADC_TDM */
+#define WM8400_AIFADC_TDM_SHIFT                     13  /* AIFADC_TDM */
+#define WM8400_AIFADC_TDM_WIDTH                      1  /* AIFADC_TDM */
+#define WM8400_AIFADC_TDM_CHAN                  0x1000  /* AIFADC_TDM_CHAN */
+#define WM8400_AIFADC_TDM_CHAN_MASK             0x1000  /* AIFADC_TDM_CHAN */
+#define WM8400_AIFADC_TDM_CHAN_SHIFT                12  /* AIFADC_TDM_CHAN */
+#define WM8400_AIFADC_TDM_CHAN_WIDTH                 1  /* AIFADC_TDM_CHAN */
+#define WM8400_AIF_BCLK_INV                     0x0100  /* AIF_BCLK_INV */
+#define WM8400_AIF_BCLK_INV_MASK                0x0100  /* AIF_BCLK_INV */
+#define WM8400_AIF_BCLK_INV_SHIFT                    8  /* AIF_BCLK_INV */
+#define WM8400_AIF_BCLK_INV_WIDTH                    1  /* AIF_BCLK_INV */
+#define WM8400_AIF_LRCLK_INV                    0x0080  /* AIF_LRCLK_INV */
+#define WM8400_AIF_LRCLK_INV_MASK               0x0080  /* AIF_LRCLK_INV */
+#define WM8400_AIF_LRCLK_INV_SHIFT                   7  /* AIF_LRCLK_INV */
+#define WM8400_AIF_LRCLK_INV_WIDTH                   1  /* AIF_LRCLK_INV */
+#define WM8400_AIF_WL_MASK                      0x0060  /* AIF_WL - [6:5] */
+#define WM8400_AIF_WL_SHIFT                          5  /* AIF_WL - [6:5] */
+#define WM8400_AIF_WL_WIDTH                          2  /* AIF_WL - [6:5] */
+#define WM8400_AIF_WL_16BITS			(0 << 5)
+#define WM8400_AIF_WL_20BITS			(1 << 5)
+#define WM8400_AIF_WL_24BITS			(2 << 5)
+#define WM8400_AIF_WL_32BITS			(3 << 5)
+#define WM8400_AIF_FMT_MASK                     0x0018  /* AIF_FMT - [4:3] */
+#define WM8400_AIF_FMT_SHIFT                         3  /* AIF_FMT - [4:3] */
+#define WM8400_AIF_FMT_WIDTH                         2  /* AIF_FMT - [4:3] */
+#define WM8400_AIF_FMT_RIGHTJ			(0 << 3)
+#define WM8400_AIF_FMT_LEFTJ			(1 << 3)
+#define WM8400_AIF_FMT_I2S			(2 << 3)
+#define WM8400_AIF_FMT_DSP			(3 << 3)
+
+/*
+ * R6 (0x06) - Audio Interface (2)
+ */
+#define WM8400_DACL_SRC                         0x8000  /* DACL_SRC */
+#define WM8400_DACL_SRC_MASK                    0x8000  /* DACL_SRC */
+#define WM8400_DACL_SRC_SHIFT                       15  /* DACL_SRC */
+#define WM8400_DACL_SRC_WIDTH                        1  /* DACL_SRC */
+#define WM8400_DACR_SRC                         0x4000  /* DACR_SRC */
+#define WM8400_DACR_SRC_MASK                    0x4000  /* DACR_SRC */
+#define WM8400_DACR_SRC_SHIFT                       14  /* DACR_SRC */
+#define WM8400_DACR_SRC_WIDTH                        1  /* DACR_SRC */
+#define WM8400_AIFDAC_TDM                       0x2000  /* AIFDAC_TDM */
+#define WM8400_AIFDAC_TDM_MASK                  0x2000  /* AIFDAC_TDM */
+#define WM8400_AIFDAC_TDM_SHIFT                     13  /* AIFDAC_TDM */
+#define WM8400_AIFDAC_TDM_WIDTH                      1  /* AIFDAC_TDM */
+#define WM8400_AIFDAC_TDM_CHAN                  0x1000  /* AIFDAC_TDM_CHAN */
+#define WM8400_AIFDAC_TDM_CHAN_MASK             0x1000  /* AIFDAC_TDM_CHAN */
+#define WM8400_AIFDAC_TDM_CHAN_SHIFT                12  /* AIFDAC_TDM_CHAN */
+#define WM8400_AIFDAC_TDM_CHAN_WIDTH                 1  /* AIFDAC_TDM_CHAN */
+#define WM8400_DAC_BOOST_MASK                   0x0C00  /* DAC_BOOST - [11:10] */
+#define WM8400_DAC_BOOST_SHIFT                      10  /* DAC_BOOST - [11:10] */
+#define WM8400_DAC_BOOST_WIDTH                       2  /* DAC_BOOST - [11:10] */
+#define WM8400_DAC_COMP                         0x0010  /* DAC_COMP */
+#define WM8400_DAC_COMP_MASK                    0x0010  /* DAC_COMP */
+#define WM8400_DAC_COMP_SHIFT                        4  /* DAC_COMP */
+#define WM8400_DAC_COMP_WIDTH                        1  /* DAC_COMP */
+#define WM8400_DAC_COMPMODE                     0x0008  /* DAC_COMPMODE */
+#define WM8400_DAC_COMPMODE_MASK                0x0008  /* DAC_COMPMODE */
+#define WM8400_DAC_COMPMODE_SHIFT                    3  /* DAC_COMPMODE */
+#define WM8400_DAC_COMPMODE_WIDTH                    1  /* DAC_COMPMODE */
+#define WM8400_ADC_COMP                         0x0004  /* ADC_COMP */
+#define WM8400_ADC_COMP_MASK                    0x0004  /* ADC_COMP */
+#define WM8400_ADC_COMP_SHIFT                        2  /* ADC_COMP */
+#define WM8400_ADC_COMP_WIDTH                        1  /* ADC_COMP */
+#define WM8400_ADC_COMPMODE                     0x0002  /* ADC_COMPMODE */
+#define WM8400_ADC_COMPMODE_MASK                0x0002  /* ADC_COMPMODE */
+#define WM8400_ADC_COMPMODE_SHIFT                    1  /* ADC_COMPMODE */
+#define WM8400_ADC_COMPMODE_WIDTH                    1  /* ADC_COMPMODE */
+#define WM8400_LOOPBACK                         0x0001  /* LOOPBACK */
+#define WM8400_LOOPBACK_MASK                    0x0001  /* LOOPBACK */
+#define WM8400_LOOPBACK_SHIFT                        0  /* LOOPBACK */
+#define WM8400_LOOPBACK_WIDTH                        1  /* LOOPBACK */
+
+/*
+ * R7 (0x07) - Clocking (1)
+ */
+#define WM8400_TOCLK_RATE                       0x8000  /* TOCLK_RATE */
+#define WM8400_TOCLK_RATE_MASK                  0x8000  /* TOCLK_RATE */
+#define WM8400_TOCLK_RATE_SHIFT                     15  /* TOCLK_RATE */
+#define WM8400_TOCLK_RATE_WIDTH                      1  /* TOCLK_RATE */
+#define WM8400_TOCLK_ENA                        0x4000  /* TOCLK_ENA */
+#define WM8400_TOCLK_ENA_MASK                   0x4000  /* TOCLK_ENA */
+#define WM8400_TOCLK_ENA_SHIFT                      14  /* TOCLK_ENA */
+#define WM8400_TOCLK_ENA_WIDTH                       1  /* TOCLK_ENA */
+#define WM8400_OPCLKDIV_MASK                    0x1E00  /* OPCLKDIV - [12:9] */
+#define WM8400_OPCLKDIV_SHIFT                        9  /* OPCLKDIV - [12:9] */
+#define WM8400_OPCLKDIV_WIDTH                        4  /* OPCLKDIV - [12:9] */
+#define WM8400_DCLKDIV_MASK                     0x01C0  /* DCLKDIV - [8:6] */
+#define WM8400_DCLKDIV_SHIFT                         6  /* DCLKDIV - [8:6] */
+#define WM8400_DCLKDIV_WIDTH                         3  /* DCLKDIV - [8:6] */
+#define WM8400_BCLK_DIV_MASK                    0x001E  /* BCLK_DIV - [4:1] */
+#define WM8400_BCLK_DIV_SHIFT                        1  /* BCLK_DIV - [4:1] */
+#define WM8400_BCLK_DIV_WIDTH                        4  /* BCLK_DIV - [4:1] */
+
+/*
+ * R8 (0x08) - Clocking (2)
+ */
+#define WM8400_MCLK_SRC                         0x8000  /* MCLK_SRC */
+#define WM8400_MCLK_SRC_MASK                    0x8000  /* MCLK_SRC */
+#define WM8400_MCLK_SRC_SHIFT                       15  /* MCLK_SRC */
+#define WM8400_MCLK_SRC_WIDTH                        1  /* MCLK_SRC */
+#define WM8400_SYSCLK_SRC                       0x4000  /* SYSCLK_SRC */
+#define WM8400_SYSCLK_SRC_MASK                  0x4000  /* SYSCLK_SRC */
+#define WM8400_SYSCLK_SRC_SHIFT                     14  /* SYSCLK_SRC */
+#define WM8400_SYSCLK_SRC_WIDTH                      1  /* SYSCLK_SRC */
+#define WM8400_CLK_FORCE                        0x2000  /* CLK_FORCE */
+#define WM8400_CLK_FORCE_MASK                   0x2000  /* CLK_FORCE */
+#define WM8400_CLK_FORCE_SHIFT                      13  /* CLK_FORCE */
+#define WM8400_CLK_FORCE_WIDTH                       1  /* CLK_FORCE */
+#define WM8400_MCLK_DIV_MASK                    0x1800  /* MCLK_DIV - [12:11] */
+#define WM8400_MCLK_DIV_SHIFT                       11  /* MCLK_DIV - [12:11] */
+#define WM8400_MCLK_DIV_WIDTH                        2  /* MCLK_DIV - [12:11] */
+#define WM8400_MCLK_INV                         0x0400  /* MCLK_INV */
+#define WM8400_MCLK_INV_MASK                    0x0400  /* MCLK_INV */
+#define WM8400_MCLK_INV_SHIFT                       10  /* MCLK_INV */
+#define WM8400_MCLK_INV_WIDTH                        1  /* MCLK_INV */
+#define WM8400_ADC_CLKDIV_MASK                  0x00E0  /* ADC_CLKDIV - [7:5] */
+#define WM8400_ADC_CLKDIV_SHIFT                      5  /* ADC_CLKDIV - [7:5] */
+#define WM8400_ADC_CLKDIV_WIDTH                      3  /* ADC_CLKDIV - [7:5] */
+#define WM8400_DAC_CLKDIV_MASK                  0x001C  /* DAC_CLKDIV - [4:2] */
+#define WM8400_DAC_CLKDIV_SHIFT                      2  /* DAC_CLKDIV - [4:2] */
+#define WM8400_DAC_CLKDIV_WIDTH                      3  /* DAC_CLKDIV - [4:2] */
+
+/*
+ * R9 (0x09) - Audio Interface (3)
+ */
+#define WM8400_AIF_MSTR1                        0x8000  /* AIF_MSTR1 */
+#define WM8400_AIF_MSTR1_MASK                   0x8000  /* AIF_MSTR1 */
+#define WM8400_AIF_MSTR1_SHIFT                      15  /* AIF_MSTR1 */
+#define WM8400_AIF_MSTR1_WIDTH                       1  /* AIF_MSTR1 */
+#define WM8400_AIF_MSTR2                        0x4000  /* AIF_MSTR2 */
+#define WM8400_AIF_MSTR2_MASK                   0x4000  /* AIF_MSTR2 */
+#define WM8400_AIF_MSTR2_SHIFT                      14  /* AIF_MSTR2 */
+#define WM8400_AIF_MSTR2_WIDTH                       1  /* AIF_MSTR2 */
+#define WM8400_AIF_SEL                          0x2000  /* AIF_SEL */
+#define WM8400_AIF_SEL_MASK                     0x2000  /* AIF_SEL */
+#define WM8400_AIF_SEL_SHIFT                        13  /* AIF_SEL */
+#define WM8400_AIF_SEL_WIDTH                         1  /* AIF_SEL */
+#define WM8400_ADCLRC_DIR                       0x0800  /* ADCLRC_DIR */
+#define WM8400_ADCLRC_DIR_MASK                  0x0800  /* ADCLRC_DIR */
+#define WM8400_ADCLRC_DIR_SHIFT                     11  /* ADCLRC_DIR */
+#define WM8400_ADCLRC_DIR_WIDTH                      1  /* ADCLRC_DIR */
+#define WM8400_ADCLRC_RATE_MASK                 0x07FF  /* ADCLRC_RATE - [10:0] */
+#define WM8400_ADCLRC_RATE_SHIFT                     0  /* ADCLRC_RATE - [10:0] */
+#define WM8400_ADCLRC_RATE_WIDTH                    11  /* ADCLRC_RATE - [10:0] */
+
+/*
+ * R10 (0x0A) - Audio Interface (4)
+ */
+#define WM8400_ALRCGPIO1                        0x8000  /* ALRCGPIO1 */
+#define WM8400_ALRCGPIO1_MASK                   0x8000  /* ALRCGPIO1 */
+#define WM8400_ALRCGPIO1_SHIFT                      15  /* ALRCGPIO1 */
+#define WM8400_ALRCGPIO1_WIDTH                       1  /* ALRCGPIO1 */
+#define WM8400_ALRCBGPIO6                       0x4000  /* ALRCBGPIO6 */
+#define WM8400_ALRCBGPIO6_MASK                  0x4000  /* ALRCBGPIO6 */
+#define WM8400_ALRCBGPIO6_SHIFT                     14  /* ALRCBGPIO6 */
+#define WM8400_ALRCBGPIO6_WIDTH                      1  /* ALRCBGPIO6 */
+#define WM8400_AIF_TRIS                         0x2000  /* AIF_TRIS */
+#define WM8400_AIF_TRIS_MASK                    0x2000  /* AIF_TRIS */
+#define WM8400_AIF_TRIS_SHIFT                       13  /* AIF_TRIS */
+#define WM8400_AIF_TRIS_WIDTH                        1  /* AIF_TRIS */
+#define WM8400_DACLRC_DIR                       0x0800  /* DACLRC_DIR */
+#define WM8400_DACLRC_DIR_MASK                  0x0800  /* DACLRC_DIR */
+#define WM8400_DACLRC_DIR_SHIFT                     11  /* DACLRC_DIR */
+#define WM8400_DACLRC_DIR_WIDTH                      1  /* DACLRC_DIR */
+#define WM8400_DACLRC_RATE_MASK                 0x07FF  /* DACLRC_RATE - [10:0] */
+#define WM8400_DACLRC_RATE_SHIFT                     0  /* DACLRC_RATE - [10:0] */
+#define WM8400_DACLRC_RATE_WIDTH                    11  /* DACLRC_RATE - [10:0] */
+
+/*
+ * R11 (0x0B) - DAC CTRL
+ */
+#define WM8400_DAC_SDMCLK_RATE                  0x2000  /* DAC_SDMCLK_RATE */
+#define WM8400_DAC_SDMCLK_RATE_MASK             0x2000  /* DAC_SDMCLK_RATE */
+#define WM8400_DAC_SDMCLK_RATE_SHIFT                13  /* DAC_SDMCLK_RATE */
+#define WM8400_DAC_SDMCLK_RATE_WIDTH                 1  /* DAC_SDMCLK_RATE */
+#define WM8400_AIF_LRCLKRATE                    0x0400  /* AIF_LRCLKRATE */
+#define WM8400_AIF_LRCLKRATE_MASK               0x0400  /* AIF_LRCLKRATE */
+#define WM8400_AIF_LRCLKRATE_SHIFT                  10  /* AIF_LRCLKRATE */
+#define WM8400_AIF_LRCLKRATE_WIDTH                   1  /* AIF_LRCLKRATE */
+#define WM8400_DAC_MONO                         0x0200  /* DAC_MONO */
+#define WM8400_DAC_MONO_MASK                    0x0200  /* DAC_MONO */
+#define WM8400_DAC_MONO_SHIFT                        9  /* DAC_MONO */
+#define WM8400_DAC_MONO_WIDTH                        1  /* DAC_MONO */
+#define WM8400_DAC_SB_FILT                      0x0100  /* DAC_SB_FILT */
+#define WM8400_DAC_SB_FILT_MASK                 0x0100  /* DAC_SB_FILT */
+#define WM8400_DAC_SB_FILT_SHIFT                     8  /* DAC_SB_FILT */
+#define WM8400_DAC_SB_FILT_WIDTH                     1  /* DAC_SB_FILT */
+#define WM8400_DAC_MUTERATE                     0x0080  /* DAC_MUTERATE */
+#define WM8400_DAC_MUTERATE_MASK                0x0080  /* DAC_MUTERATE */
+#define WM8400_DAC_MUTERATE_SHIFT                    7  /* DAC_MUTERATE */
+#define WM8400_DAC_MUTERATE_WIDTH                    1  /* DAC_MUTERATE */
+#define WM8400_DAC_MUTEMODE                     0x0040  /* DAC_MUTEMODE */
+#define WM8400_DAC_MUTEMODE_MASK                0x0040  /* DAC_MUTEMODE */
+#define WM8400_DAC_MUTEMODE_SHIFT                    6  /* DAC_MUTEMODE */
+#define WM8400_DAC_MUTEMODE_WIDTH                    1  /* DAC_MUTEMODE */
+#define WM8400_DEEMP_MASK                       0x0030  /* DEEMP - [5:4] */
+#define WM8400_DEEMP_SHIFT                           4  /* DEEMP - [5:4] */
+#define WM8400_DEEMP_WIDTH                           2  /* DEEMP - [5:4] */
+#define WM8400_DAC_MUTE                         0x0004  /* DAC_MUTE */
+#define WM8400_DAC_MUTE_MASK                    0x0004  /* DAC_MUTE */
+#define WM8400_DAC_MUTE_SHIFT                        2  /* DAC_MUTE */
+#define WM8400_DAC_MUTE_WIDTH                        1  /* DAC_MUTE */
+#define WM8400_DACL_DATINV                      0x0002  /* DACL_DATINV */
+#define WM8400_DACL_DATINV_MASK                 0x0002  /* DACL_DATINV */
+#define WM8400_DACL_DATINV_SHIFT                     1  /* DACL_DATINV */
+#define WM8400_DACL_DATINV_WIDTH                     1  /* DACL_DATINV */
+#define WM8400_DACR_DATINV                      0x0001  /* DACR_DATINV */
+#define WM8400_DACR_DATINV_MASK                 0x0001  /* DACR_DATINV */
+#define WM8400_DACR_DATINV_SHIFT                     0  /* DACR_DATINV */
+#define WM8400_DACR_DATINV_WIDTH                     1  /* DACR_DATINV */
+
+/*
+ * R12 (0x0C) - Left DAC Digital Volume
+ */
+#define WM8400_DAC_VU                           0x0100  /* DAC_VU */
+#define WM8400_DAC_VU_MASK                      0x0100  /* DAC_VU */
+#define WM8400_DAC_VU_SHIFT                          8  /* DAC_VU */
+#define WM8400_DAC_VU_WIDTH                          1  /* DAC_VU */
+#define WM8400_DACL_VOL_MASK                    0x00FF  /* DACL_VOL - [7:0] */
+#define WM8400_DACL_VOL_SHIFT                        0  /* DACL_VOL - [7:0] */
+#define WM8400_DACL_VOL_WIDTH                        8  /* DACL_VOL - [7:0] */
+
+/*
+ * R13 (0x0D) - Right DAC Digital Volume
+ */
+#define WM8400_DAC_VU                           0x0100  /* DAC_VU */
+#define WM8400_DAC_VU_MASK                      0x0100  /* DAC_VU */
+#define WM8400_DAC_VU_SHIFT                          8  /* DAC_VU */
+#define WM8400_DAC_VU_WIDTH                          1  /* DAC_VU */
+#define WM8400_DACR_VOL_MASK                    0x00FF  /* DACR_VOL - [7:0] */
+#define WM8400_DACR_VOL_SHIFT                        0  /* DACR_VOL - [7:0] */
+#define WM8400_DACR_VOL_WIDTH                        8  /* DACR_VOL - [7:0] */
+
+/*
+ * R14 (0x0E) - Digital Side Tone
+ */
+#define WM8400_ADCL_DAC_SVOL_MASK               0x1E00  /*   ADCL_DAC_SVOL - [12:9] */
+#define WM8400_ADCL_DAC_SVOL_SHIFT                   9  /*   ADCL_DAC_SVOL - [12:9] */
+#define WM8400_ADCL_DAC_SVOL_WIDTH                   4  /*   ADCL_DAC_SVOL - [12:9] */
+#define WM8400_ADCR_DAC_SVOL_MASK               0x01E0  /* ADCR_DAC_SVOL - [8:5] */
+#define WM8400_ADCR_DAC_SVOL_SHIFT                   5  /* ADCR_DAC_SVOL - [8:5] */
+#define WM8400_ADCR_DAC_SVOL_WIDTH                   4  /* ADCR_DAC_SVOL - [8:5] */
+#define WM8400_ADC_TO_DACL_MASK                 0x000C  /* ADC_TO_DACL - [3:2] */
+#define WM8400_ADC_TO_DACL_SHIFT                     2  /* ADC_TO_DACL - [3:2] */
+#define WM8400_ADC_TO_DACL_WIDTH                     2  /* ADC_TO_DACL - [3:2] */
+#define WM8400_ADC_TO_DACR_MASK                 0x0003  /* ADC_TO_DACR - [1:0] */
+#define WM8400_ADC_TO_DACR_SHIFT                     0  /* ADC_TO_DACR - [1:0] */
+#define WM8400_ADC_TO_DACR_WIDTH                     2  /* ADC_TO_DACR - [1:0] */
+
+/*
+ * R15 (0x0F) - ADC CTRL
+ */
+#define WM8400_ADC_HPF_ENA                      0x0100  /* ADC_HPF_ENA */
+#define WM8400_ADC_HPF_ENA_MASK                 0x0100  /* ADC_HPF_ENA */
+#define WM8400_ADC_HPF_ENA_SHIFT                     8  /* ADC_HPF_ENA */
+#define WM8400_ADC_HPF_ENA_WIDTH                     1  /* ADC_HPF_ENA */
+#define WM8400_ADC_HPF_CUT_MASK                 0x0060  /* ADC_HPF_CUT - [6:5] */
+#define WM8400_ADC_HPF_CUT_SHIFT                     5  /* ADC_HPF_CUT - [6:5] */
+#define WM8400_ADC_HPF_CUT_WIDTH                     2  /* ADC_HPF_CUT - [6:5] */
+#define WM8400_ADCL_DATINV                      0x0002  /* ADCL_DATINV */
+#define WM8400_ADCL_DATINV_MASK                 0x0002  /* ADCL_DATINV */
+#define WM8400_ADCL_DATINV_SHIFT                     1  /* ADCL_DATINV */
+#define WM8400_ADCL_DATINV_WIDTH                     1  /* ADCL_DATINV */
+#define WM8400_ADCR_DATINV                      0x0001  /* ADCR_DATINV */
+#define WM8400_ADCR_DATINV_MASK                 0x0001  /* ADCR_DATINV */
+#define WM8400_ADCR_DATINV_SHIFT                     0  /* ADCR_DATINV */
+#define WM8400_ADCR_DATINV_WIDTH                     1  /* ADCR_DATINV */
+
+/*
+ * R16 (0x10) - Left ADC Digital Volume
+ */
+#define WM8400_ADC_VU                           0x0100  /* ADC_VU */
+#define WM8400_ADC_VU_MASK                      0x0100  /* ADC_VU */
+#define WM8400_ADC_VU_SHIFT                          8  /* ADC_VU */
+#define WM8400_ADC_VU_WIDTH                          1  /* ADC_VU */
+#define WM8400_ADCL_VOL_MASK                    0x00FF  /* ADCL_VOL - [7:0] */
+#define WM8400_ADCL_VOL_SHIFT                        0  /* ADCL_VOL - [7:0] */
+#define WM8400_ADCL_VOL_WIDTH                        8  /* ADCL_VOL - [7:0] */
+
+/*
+ * R17 (0x11) - Right ADC Digital Volume
+ */
+#define WM8400_ADC_VU                           0x0100  /* ADC_VU */
+#define WM8400_ADC_VU_MASK                      0x0100  /* ADC_VU */
+#define WM8400_ADC_VU_SHIFT                          8  /* ADC_VU */
+#define WM8400_ADC_VU_WIDTH                          1  /* ADC_VU */
+#define WM8400_ADCR_VOL_MASK                    0x00FF  /* ADCR_VOL - [7:0] */
+#define WM8400_ADCR_VOL_SHIFT                        0  /* ADCR_VOL - [7:0] */
+#define WM8400_ADCR_VOL_WIDTH                        8  /* ADCR_VOL - [7:0] */
+
+/*
+ * R24 (0x18) - Left Line Input 1&2 Volume
+ */
+#define WM8400_IPVU                             0x0100  /* IPVU */
+#define WM8400_IPVU_MASK                        0x0100  /* IPVU */
+#define WM8400_IPVU_SHIFT                            8  /* IPVU */
+#define WM8400_IPVU_WIDTH                            1  /* IPVU */
+#define WM8400_LI12MUTE                         0x0080  /* LI12MUTE */
+#define WM8400_LI12MUTE_MASK                    0x0080  /* LI12MUTE */
+#define WM8400_LI12MUTE_SHIFT                        7  /* LI12MUTE */
+#define WM8400_LI12MUTE_WIDTH                        1  /* LI12MUTE */
+#define WM8400_LI12ZC                           0x0040  /* LI12ZC */
+#define WM8400_LI12ZC_MASK                      0x0040  /* LI12ZC */
+#define WM8400_LI12ZC_SHIFT                          6  /* LI12ZC */
+#define WM8400_LI12ZC_WIDTH                          1  /* LI12ZC */
+#define WM8400_LIN12VOL_MASK                    0x001F  /* LIN12VOL - [4:0] */
+#define WM8400_LIN12VOL_SHIFT                        0  /* LIN12VOL - [4:0] */
+#define WM8400_LIN12VOL_WIDTH                        5  /* LIN12VOL - [4:0] */
+
+/*
+ * R25 (0x19) - Left Line Input 3&4 Volume
+ */
+#define WM8400_IPVU                             0x0100  /* IPVU */
+#define WM8400_IPVU_MASK                        0x0100  /* IPVU */
+#define WM8400_IPVU_SHIFT                            8  /* IPVU */
+#define WM8400_IPVU_WIDTH                            1  /* IPVU */
+#define WM8400_LI34MUTE                         0x0080  /* LI34MUTE */
+#define WM8400_LI34MUTE_MASK                    0x0080  /* LI34MUTE */
+#define WM8400_LI34MUTE_SHIFT                        7  /* LI34MUTE */
+#define WM8400_LI34MUTE_WIDTH                        1  /* LI34MUTE */
+#define WM8400_LI34ZC                           0x0040  /* LI34ZC */
+#define WM8400_LI34ZC_MASK                      0x0040  /* LI34ZC */
+#define WM8400_LI34ZC_SHIFT                          6  /* LI34ZC */
+#define WM8400_LI34ZC_WIDTH                          1  /* LI34ZC */
+#define WM8400_LIN34VOL_MASK                    0x001F  /* LIN34VOL - [4:0] */
+#define WM8400_LIN34VOL_SHIFT                        0  /* LIN34VOL - [4:0] */
+#define WM8400_LIN34VOL_WIDTH                        5  /* LIN34VOL - [4:0] */
+
+/*
+ * R26 (0x1A) - Right Line Input 1&2 Volume
+ */
+#define WM8400_IPVU                             0x0100  /* IPVU */
+#define WM8400_IPVU_MASK                        0x0100  /* IPVU */
+#define WM8400_IPVU_SHIFT                            8  /* IPVU */
+#define WM8400_IPVU_WIDTH                            1  /* IPVU */
+#define WM8400_RI12MUTE                         0x0080  /* RI12MUTE */
+#define WM8400_RI12MUTE_MASK                    0x0080  /* RI12MUTE */
+#define WM8400_RI12MUTE_SHIFT                        7  /* RI12MUTE */
+#define WM8400_RI12MUTE_WIDTH                        1  /* RI12MUTE */
+#define WM8400_RI12ZC                           0x0040  /* RI12ZC */
+#define WM8400_RI12ZC_MASK                      0x0040  /* RI12ZC */
+#define WM8400_RI12ZC_SHIFT                          6  /* RI12ZC */
+#define WM8400_RI12ZC_WIDTH                          1  /* RI12ZC */
+#define WM8400_RIN12VOL_MASK                    0x001F  /* RIN12VOL - [4:0] */
+#define WM8400_RIN12VOL_SHIFT                        0  /* RIN12VOL - [4:0] */
+#define WM8400_RIN12VOL_WIDTH                        5  /* RIN12VOL - [4:0] */
+
+/*
+ * R27 (0x1B) - Right Line Input 3&4 Volume
+ */
+#define WM8400_IPVU                             0x0100  /* IPVU */
+#define WM8400_IPVU_MASK                        0x0100  /* IPVU */
+#define WM8400_IPVU_SHIFT                            8  /* IPVU */
+#define WM8400_IPVU_WIDTH                            1  /* IPVU */
+#define WM8400_RI34MUTE                         0x0080  /* RI34MUTE */
+#define WM8400_RI34MUTE_MASK                    0x0080  /* RI34MUTE */
+#define WM8400_RI34MUTE_SHIFT                        7  /* RI34MUTE */
+#define WM8400_RI34MUTE_WIDTH                        1  /* RI34MUTE */
+#define WM8400_RI34ZC                           0x0040  /* RI34ZC */
+#define WM8400_RI34ZC_MASK                      0x0040  /* RI34ZC */
+#define WM8400_RI34ZC_SHIFT                          6  /* RI34ZC */
+#define WM8400_RI34ZC_WIDTH                          1  /* RI34ZC */
+#define WM8400_RIN34VOL_MASK                    0x001F  /* RIN34VOL - [4:0] */
+#define WM8400_RIN34VOL_SHIFT                        0  /* RIN34VOL - [4:0] */
+#define WM8400_RIN34VOL_WIDTH                        5  /* RIN34VOL - [4:0] */
+
+/*
+ * R28 (0x1C) - Left Output Volume
+ */
+#define WM8400_OPVU                             0x0100  /* OPVU */
+#define WM8400_OPVU_MASK                        0x0100  /* OPVU */
+#define WM8400_OPVU_SHIFT                            8  /* OPVU */
+#define WM8400_OPVU_WIDTH                            1  /* OPVU */
+#define WM8400_LOZC                             0x0080  /* LOZC */
+#define WM8400_LOZC_MASK                        0x0080  /* LOZC */
+#define WM8400_LOZC_SHIFT                            7  /* LOZC */
+#define WM8400_LOZC_WIDTH                            1  /* LOZC */
+#define WM8400_LOUTVOL_MASK                     0x007F  /* LOUTVOL - [6:0] */
+#define WM8400_LOUTVOL_SHIFT                         0  /* LOUTVOL - [6:0] */
+#define WM8400_LOUTVOL_WIDTH                         7  /* LOUTVOL - [6:0] */
+
+/*
+ * R29 (0x1D) - Right Output Volume
+ */
+#define WM8400_OPVU                             0x0100  /* OPVU */
+#define WM8400_OPVU_MASK                        0x0100  /* OPVU */
+#define WM8400_OPVU_SHIFT                            8  /* OPVU */
+#define WM8400_OPVU_WIDTH                            1  /* OPVU */
+#define WM8400_ROZC                             0x0080  /* ROZC */
+#define WM8400_ROZC_MASK                        0x0080  /* ROZC */
+#define WM8400_ROZC_SHIFT                            7  /* ROZC */
+#define WM8400_ROZC_WIDTH                            1  /* ROZC */
+#define WM8400_ROUTVOL_MASK                     0x007F  /* ROUTVOL - [6:0] */
+#define WM8400_ROUTVOL_SHIFT                         0  /* ROUTVOL - [6:0] */
+#define WM8400_ROUTVOL_WIDTH                         7  /* ROUTVOL - [6:0] */
+
+/*
+ * R30 (0x1E) - Line Outputs Volume
+ */
+#define WM8400_LONMUTE                          0x0040  /* LONMUTE */
+#define WM8400_LONMUTE_MASK                     0x0040  /* LONMUTE */
+#define WM8400_LONMUTE_SHIFT                         6  /* LONMUTE */
+#define WM8400_LONMUTE_WIDTH                         1  /* LONMUTE */
+#define WM8400_LOPMUTE                          0x0020  /* LOPMUTE */
+#define WM8400_LOPMUTE_MASK                     0x0020  /* LOPMUTE */
+#define WM8400_LOPMUTE_SHIFT                         5  /* LOPMUTE */
+#define WM8400_LOPMUTE_WIDTH                         1  /* LOPMUTE */
+#define WM8400_LOATTN                           0x0010  /* LOATTN */
+#define WM8400_LOATTN_MASK                      0x0010  /* LOATTN */
+#define WM8400_LOATTN_SHIFT                          4  /* LOATTN */
+#define WM8400_LOATTN_WIDTH                          1  /* LOATTN */
+#define WM8400_RONMUTE                          0x0004  /* RONMUTE */
+#define WM8400_RONMUTE_MASK                     0x0004  /* RONMUTE */
+#define WM8400_RONMUTE_SHIFT                         2  /* RONMUTE */
+#define WM8400_RONMUTE_WIDTH                         1  /* RONMUTE */
+#define WM8400_ROPMUTE                          0x0002  /* ROPMUTE */
+#define WM8400_ROPMUTE_MASK                     0x0002  /* ROPMUTE */
+#define WM8400_ROPMUTE_SHIFT                         1  /* ROPMUTE */
+#define WM8400_ROPMUTE_WIDTH                         1  /* ROPMUTE */
+#define WM8400_ROATTN                           0x0001  /* ROATTN */
+#define WM8400_ROATTN_MASK                      0x0001  /* ROATTN */
+#define WM8400_ROATTN_SHIFT                          0  /* ROATTN */
+#define WM8400_ROATTN_WIDTH                          1  /* ROATTN */
+
+/*
+ * R31 (0x1F) - Out3/4 Volume
+ */
+#define WM8400_OUT3MUTE                         0x0020  /* OUT3MUTE */
+#define WM8400_OUT3MUTE_MASK                    0x0020  /* OUT3MUTE */
+#define WM8400_OUT3MUTE_SHIFT                        5  /* OUT3MUTE */
+#define WM8400_OUT3MUTE_WIDTH                        1  /* OUT3MUTE */
+#define WM8400_OUT3ATTN                         0x0010  /* OUT3ATTN */
+#define WM8400_OUT3ATTN_MASK                    0x0010  /* OUT3ATTN */
+#define WM8400_OUT3ATTN_SHIFT                        4  /* OUT3ATTN */
+#define WM8400_OUT3ATTN_WIDTH                        1  /* OUT3ATTN */
+#define WM8400_OUT4MUTE                         0x0002  /* OUT4MUTE */
+#define WM8400_OUT4MUTE_MASK                    0x0002  /* OUT4MUTE */
+#define WM8400_OUT4MUTE_SHIFT                        1  /* OUT4MUTE */
+#define WM8400_OUT4MUTE_WIDTH                        1  /* OUT4MUTE */
+#define WM8400_OUT4ATTN                         0x0001  /* OUT4ATTN */
+#define WM8400_OUT4ATTN_MASK                    0x0001  /* OUT4ATTN */
+#define WM8400_OUT4ATTN_SHIFT                        0  /* OUT4ATTN */
+#define WM8400_OUT4ATTN_WIDTH                        1  /* OUT4ATTN */
+
+/*
+ * R32 (0x20) - Left OPGA Volume
+ */
+#define WM8400_OPVU                             0x0100  /* OPVU */
+#define WM8400_OPVU_MASK                        0x0100  /* OPVU */
+#define WM8400_OPVU_SHIFT                            8  /* OPVU */
+#define WM8400_OPVU_WIDTH                            1  /* OPVU */
+#define WM8400_LOPGAZC                          0x0080  /* LOPGAZC */
+#define WM8400_LOPGAZC_MASK                     0x0080  /* LOPGAZC */
+#define WM8400_LOPGAZC_SHIFT                         7  /* LOPGAZC */
+#define WM8400_LOPGAZC_WIDTH                         1  /* LOPGAZC */
+#define WM8400_LOPGAVOL_MASK                    0x007F  /* LOPGAVOL - [6:0] */
+#define WM8400_LOPGAVOL_SHIFT                        0  /* LOPGAVOL - [6:0] */
+#define WM8400_LOPGAVOL_WIDTH                        7  /* LOPGAVOL - [6:0] */
+
+/*
+ * R33 (0x21) - Right OPGA Volume
+ */
+#define WM8400_OPVU                             0x0100  /* OPVU */
+#define WM8400_OPVU_MASK                        0x0100  /* OPVU */
+#define WM8400_OPVU_SHIFT                            8  /* OPVU */
+#define WM8400_OPVU_WIDTH                            1  /* OPVU */
+#define WM8400_ROPGAZC                          0x0080  /* ROPGAZC */
+#define WM8400_ROPGAZC_MASK                     0x0080  /* ROPGAZC */
+#define WM8400_ROPGAZC_SHIFT                         7  /* ROPGAZC */
+#define WM8400_ROPGAZC_WIDTH                         1  /* ROPGAZC */
+#define WM8400_ROPGAVOL_MASK                    0x007F  /* ROPGAVOL - [6:0] */
+#define WM8400_ROPGAVOL_SHIFT                        0  /* ROPGAVOL - [6:0] */
+#define WM8400_ROPGAVOL_WIDTH                        7  /* ROPGAVOL - [6:0] */
+
+/*
+ * R34 (0x22) - Speaker Volume
+ */
+#define WM8400_SPKATTN_MASK                     0x0003  /* SPKATTN - [1:0] */
+#define WM8400_SPKATTN_SHIFT                         0  /* SPKATTN - [1:0] */
+#define WM8400_SPKATTN_WIDTH                         2  /* SPKATTN - [1:0] */
+
+/*
+ * R35 (0x23) - ClassD1
+ */
+#define WM8400_CDMODE                           0x0100  /* CDMODE */
+#define WM8400_CDMODE_MASK                      0x0100  /* CDMODE */
+#define WM8400_CDMODE_SHIFT                          8  /* CDMODE */
+#define WM8400_CDMODE_WIDTH                          1  /* CDMODE */
+#define WM8400_CLASSD_CLK_SEL                   0x0080  /* CLASSD_CLK_SEL */
+#define WM8400_CLASSD_CLK_SEL_MASK              0x0080  /* CLASSD_CLK_SEL */
+#define WM8400_CLASSD_CLK_SEL_SHIFT                  7  /* CLASSD_CLK_SEL */
+#define WM8400_CLASSD_CLK_SEL_WIDTH                  1  /* CLASSD_CLK_SEL */
+#define WM8400_CD_SRCTRL                        0x0040  /* CD_SRCTRL */
+#define WM8400_CD_SRCTRL_MASK                   0x0040  /* CD_SRCTRL */
+#define WM8400_CD_SRCTRL_SHIFT                       6  /* CD_SRCTRL */
+#define WM8400_CD_SRCTRL_WIDTH                       1  /* CD_SRCTRL */
+#define WM8400_SPKNOPOP                         0x0020  /* SPKNOPOP */
+#define WM8400_SPKNOPOP_MASK                    0x0020  /* SPKNOPOP */
+#define WM8400_SPKNOPOP_SHIFT                        5  /* SPKNOPOP */
+#define WM8400_SPKNOPOP_WIDTH                        1  /* SPKNOPOP */
+#define WM8400_DBLERATE                         0x0010  /* DBLERATE */
+#define WM8400_DBLERATE_MASK                    0x0010  /* DBLERATE */
+#define WM8400_DBLERATE_SHIFT                        4  /* DBLERATE */
+#define WM8400_DBLERATE_WIDTH                        1  /* DBLERATE */
+#define WM8400_LOOPTEST                         0x0008  /* LOOPTEST */
+#define WM8400_LOOPTEST_MASK                    0x0008  /* LOOPTEST */
+#define WM8400_LOOPTEST_SHIFT                        3  /* LOOPTEST */
+#define WM8400_LOOPTEST_WIDTH                        1  /* LOOPTEST */
+#define WM8400_HALFABBIAS                       0x0004  /* HALFABBIAS */
+#define WM8400_HALFABBIAS_MASK                  0x0004  /* HALFABBIAS */
+#define WM8400_HALFABBIAS_SHIFT                      2  /* HALFABBIAS */
+#define WM8400_HALFABBIAS_WIDTH                      1  /* HALFABBIAS */
+#define WM8400_TRIDEL_MASK                      0x0003  /* TRIDEL - [1:0] */
+#define WM8400_TRIDEL_SHIFT                          0  /* TRIDEL - [1:0] */
+#define WM8400_TRIDEL_WIDTH                          2  /* TRIDEL - [1:0] */
+
+/*
+ * R37 (0x25) - ClassD3
+ */
+#define WM8400_DCGAIN_MASK                      0x0038  /* DCGAIN - [5:3] */
+#define WM8400_DCGAIN_SHIFT                          3  /* DCGAIN - [5:3] */
+#define WM8400_DCGAIN_WIDTH                          3  /* DCGAIN - [5:3] */
+#define WM8400_ACGAIN_MASK                      0x0007  /* ACGAIN - [2:0] */
+#define WM8400_ACGAIN_SHIFT                          0  /* ACGAIN - [2:0] */
+#define WM8400_ACGAIN_WIDTH                          3  /* ACGAIN - [2:0] */
+
+/*
+ * R39 (0x27) - Input Mixer1
+ */
+#define WM8400_AINLMODE_MASK                    0x000C  /* AINLMODE - [3:2] */
+#define WM8400_AINLMODE_SHIFT                        2  /* AINLMODE - [3:2] */
+#define WM8400_AINLMODE_WIDTH                        2  /* AINLMODE - [3:2] */
+#define WM8400_AINRMODE_MASK                    0x0003  /* AINRMODE - [1:0] */
+#define WM8400_AINRMODE_SHIFT                        0  /* AINRMODE - [1:0] */
+#define WM8400_AINRMODE_WIDTH                        2  /* AINRMODE - [1:0] */
+
+/*
+ * R40 (0x28) - Input Mixer2
+ */
+#define WM8400_LMP4                             0x0080  /* LMP4 */
+#define WM8400_LMP4_MASK                        0x0080  /* LMP4 */
+#define WM8400_LMP4_SHIFT                            7  /* LMP4 */
+#define WM8400_LMP4_WIDTH                            1  /* LMP4 */
+#define WM8400_LMN3                             0x0040  /* LMN3 */
+#define WM8400_LMN3_MASK                        0x0040  /* LMN3 */
+#define WM8400_LMN3_SHIFT                            6  /* LMN3 */
+#define WM8400_LMN3_WIDTH                            1  /* LMN3 */
+#define WM8400_LMP2                             0x0020  /* LMP2 */
+#define WM8400_LMP2_MASK                        0x0020  /* LMP2 */
+#define WM8400_LMP2_SHIFT                            5  /* LMP2 */
+#define WM8400_LMP2_WIDTH                            1  /* LMP2 */
+#define WM8400_LMN1                             0x0010  /* LMN1 */
+#define WM8400_LMN1_MASK                        0x0010  /* LMN1 */
+#define WM8400_LMN1_SHIFT                            4  /* LMN1 */
+#define WM8400_LMN1_WIDTH                            1  /* LMN1 */
+#define WM8400_RMP4                             0x0008  /* RMP4 */
+#define WM8400_RMP4_MASK                        0x0008  /* RMP4 */
+#define WM8400_RMP4_SHIFT                            3  /* RMP4 */
+#define WM8400_RMP4_WIDTH                            1  /* RMP4 */
+#define WM8400_RMN3                             0x0004  /* RMN3 */
+#define WM8400_RMN3_MASK                        0x0004  /* RMN3 */
+#define WM8400_RMN3_SHIFT                            2  /* RMN3 */
+#define WM8400_RMN3_WIDTH                            1  /* RMN3 */
+#define WM8400_RMP2                             0x0002  /* RMP2 */
+#define WM8400_RMP2_MASK                        0x0002  /* RMP2 */
+#define WM8400_RMP2_SHIFT                            1  /* RMP2 */
+#define WM8400_RMP2_WIDTH                            1  /* RMP2 */
+#define WM8400_RMN1                             0x0001  /* RMN1 */
+#define WM8400_RMN1_MASK                        0x0001  /* RMN1 */
+#define WM8400_RMN1_SHIFT                            0  /* RMN1 */
+#define WM8400_RMN1_WIDTH                            1  /* RMN1 */
+
+/*
+ * R41 (0x29) - Input Mixer3
+ */
+#define WM8400_L34MNB                           0x0100  /* L34MNB */
+#define WM8400_L34MNB_MASK                      0x0100  /* L34MNB */
+#define WM8400_L34MNB_SHIFT                          8  /* L34MNB */
+#define WM8400_L34MNB_WIDTH                          1  /* L34MNB */
+#define WM8400_L34MNBST                         0x0080  /* L34MNBST */
+#define WM8400_L34MNBST_MASK                    0x0080  /* L34MNBST */
+#define WM8400_L34MNBST_SHIFT                        7  /* L34MNBST */
+#define WM8400_L34MNBST_WIDTH                        1  /* L34MNBST */
+#define WM8400_L12MNB                           0x0020  /* L12MNB */
+#define WM8400_L12MNB_MASK                      0x0020  /* L12MNB */
+#define WM8400_L12MNB_SHIFT                          5  /* L12MNB */
+#define WM8400_L12MNB_WIDTH                          1  /* L12MNB */
+#define WM8400_L12MNBST                         0x0010  /* L12MNBST */
+#define WM8400_L12MNBST_MASK                    0x0010  /* L12MNBST */
+#define WM8400_L12MNBST_SHIFT                        4  /* L12MNBST */
+#define WM8400_L12MNBST_WIDTH                        1  /* L12MNBST */
+#define WM8400_LDBVOL_MASK                      0x0007  /* LDBVOL - [2:0] */
+#define WM8400_LDBVOL_SHIFT                          0  /* LDBVOL - [2:0] */
+#define WM8400_LDBVOL_WIDTH                          3  /* LDBVOL - [2:0] */
+
+/*
+ * R42 (0x2A) - Input Mixer4
+ */
+#define WM8400_R34MNB                           0x0100  /* R34MNB */
+#define WM8400_R34MNB_MASK                      0x0100  /* R34MNB */
+#define WM8400_R34MNB_SHIFT                          8  /* R34MNB */
+#define WM8400_R34MNB_WIDTH                          1  /* R34MNB */
+#define WM8400_R34MNBST                         0x0080  /* R34MNBST */
+#define WM8400_R34MNBST_MASK                    0x0080  /* R34MNBST */
+#define WM8400_R34MNBST_SHIFT                        7  /* R34MNBST */
+#define WM8400_R34MNBST_WIDTH                        1  /* R34MNBST */
+#define WM8400_R12MNB                           0x0020  /* R12MNB */
+#define WM8400_R12MNB_MASK                      0x0020  /* R12MNB */
+#define WM8400_R12MNB_SHIFT                          5  /* R12MNB */
+#define WM8400_R12MNB_WIDTH                          1  /* R12MNB */
+#define WM8400_R12MNBST                         0x0010  /* R12MNBST */
+#define WM8400_R12MNBST_MASK                    0x0010  /* R12MNBST */
+#define WM8400_R12MNBST_SHIFT                        4  /* R12MNBST */
+#define WM8400_R12MNBST_WIDTH                        1  /* R12MNBST */
+#define WM8400_RDBVOL_MASK                      0x0007  /* RDBVOL - [2:0] */
+#define WM8400_RDBVOL_SHIFT                          0  /* RDBVOL - [2:0] */
+#define WM8400_RDBVOL_WIDTH                          3  /* RDBVOL - [2:0] */
+
+/*
+ * R43 (0x2B) - Input Mixer5
+ */
+#define WM8400_LI2BVOL_MASK                     0x01C0  /* LI2BVOL - [8:6] */
+#define WM8400_LI2BVOL_SHIFT                         6  /* LI2BVOL - [8:6] */
+#define WM8400_LI2BVOL_WIDTH                         3  /* LI2BVOL - [8:6] */
+#define WM8400_LR4BVOL_MASK                     0x0038  /* LR4BVOL - [5:3] */
+#define WM8400_LR4BVOL_SHIFT                         3  /* LR4BVOL - [5:3] */
+#define WM8400_LR4BVOL_WIDTH                         3  /* LR4BVOL - [5:3] */
+#define WM8400_LL4BVOL_MASK                     0x0007  /* LL4BVOL - [2:0] */
+#define WM8400_LL4BVOL_SHIFT                         0  /* LL4BVOL - [2:0] */
+#define WM8400_LL4BVOL_WIDTH                         3  /* LL4BVOL - [2:0] */
+
+/*
+ * R44 (0x2C) - Input Mixer6
+ */
+#define WM8400_RI2BVOL_MASK                     0x01C0  /* RI2BVOL - [8:6] */
+#define WM8400_RI2BVOL_SHIFT                         6  /* RI2BVOL - [8:6] */
+#define WM8400_RI2BVOL_WIDTH                         3  /* RI2BVOL - [8:6] */
+#define WM8400_RL4BVOL_MASK                     0x0038  /* RL4BVOL - [5:3] */
+#define WM8400_RL4BVOL_SHIFT                         3  /* RL4BVOL - [5:3] */
+#define WM8400_RL4BVOL_WIDTH                         3  /* RL4BVOL - [5:3] */
+#define WM8400_RR4BVOL_MASK                     0x0007  /* RR4BVOL - [2:0] */
+#define WM8400_RR4BVOL_SHIFT                         0  /* RR4BVOL - [2:0] */
+#define WM8400_RR4BVOL_WIDTH                         3  /* RR4BVOL - [2:0] */
+
+/*
+ * R45 (0x2D) - Output Mixer1
+ */
+#define WM8400_LRBLO                            0x0080  /* LRBLO */
+#define WM8400_LRBLO_MASK                       0x0080  /* LRBLO */
+#define WM8400_LRBLO_SHIFT                           7  /* LRBLO */
+#define WM8400_LRBLO_WIDTH                           1  /* LRBLO */
+#define WM8400_LLBLO                            0x0040  /* LLBLO */
+#define WM8400_LLBLO_MASK                       0x0040  /* LLBLO */
+#define WM8400_LLBLO_SHIFT                           6  /* LLBLO */
+#define WM8400_LLBLO_WIDTH                           1  /* LLBLO */
+#define WM8400_LRI3LO                           0x0020  /* LRI3LO */
+#define WM8400_LRI3LO_MASK                      0x0020  /* LRI3LO */
+#define WM8400_LRI3LO_SHIFT                          5  /* LRI3LO */
+#define WM8400_LRI3LO_WIDTH                          1  /* LRI3LO */
+#define WM8400_LLI3LO                           0x0010  /* LLI3LO */
+#define WM8400_LLI3LO_MASK                      0x0010  /* LLI3LO */
+#define WM8400_LLI3LO_SHIFT                          4  /* LLI3LO */
+#define WM8400_LLI3LO_WIDTH                          1  /* LLI3LO */
+#define WM8400_LR12LO                           0x0008  /* LR12LO */
+#define WM8400_LR12LO_MASK                      0x0008  /* LR12LO */
+#define WM8400_LR12LO_SHIFT                          3  /* LR12LO */
+#define WM8400_LR12LO_WIDTH                          1  /* LR12LO */
+#define WM8400_LL12LO                           0x0004  /* LL12LO */
+#define WM8400_LL12LO_MASK                      0x0004  /* LL12LO */
+#define WM8400_LL12LO_SHIFT                          2  /* LL12LO */
+#define WM8400_LL12LO_WIDTH                          1  /* LL12LO */
+#define WM8400_LDLO                             0x0001  /* LDLO */
+#define WM8400_LDLO_MASK                        0x0001  /* LDLO */
+#define WM8400_LDLO_SHIFT                            0  /* LDLO */
+#define WM8400_LDLO_WIDTH                            1  /* LDLO */
+
+/*
+ * R46 (0x2E) - Output Mixer2
+ */
+#define WM8400_RLBRO                            0x0080  /* RLBRO */
+#define WM8400_RLBRO_MASK                       0x0080  /* RLBRO */
+#define WM8400_RLBRO_SHIFT                           7  /* RLBRO */
+#define WM8400_RLBRO_WIDTH                           1  /* RLBRO */
+#define WM8400_RRBRO                            0x0040  /* RRBRO */
+#define WM8400_RRBRO_MASK                       0x0040  /* RRBRO */
+#define WM8400_RRBRO_SHIFT                           6  /* RRBRO */
+#define WM8400_RRBRO_WIDTH                           1  /* RRBRO */
+#define WM8400_RLI3RO                           0x0020  /* RLI3RO */
+#define WM8400_RLI3RO_MASK                      0x0020  /* RLI3RO */
+#define WM8400_RLI3RO_SHIFT                          5  /* RLI3RO */
+#define WM8400_RLI3RO_WIDTH                          1  /* RLI3RO */
+#define WM8400_RRI3RO                           0x0010  /* RRI3RO */
+#define WM8400_RRI3RO_MASK                      0x0010  /* RRI3RO */
+#define WM8400_RRI3RO_SHIFT                          4  /* RRI3RO */
+#define WM8400_RRI3RO_WIDTH                          1  /* RRI3RO */
+#define WM8400_RL12RO                           0x0008  /* RL12RO */
+#define WM8400_RL12RO_MASK                      0x0008  /* RL12RO */
+#define WM8400_RL12RO_SHIFT                          3  /* RL12RO */
+#define WM8400_RL12RO_WIDTH                          1  /* RL12RO */
+#define WM8400_RR12RO                           0x0004  /* RR12RO */
+#define WM8400_RR12RO_MASK                      0x0004  /* RR12RO */
+#define WM8400_RR12RO_SHIFT                          2  /* RR12RO */
+#define WM8400_RR12RO_WIDTH                          1  /* RR12RO */
+#define WM8400_RDRO                             0x0001  /* RDRO */
+#define WM8400_RDRO_MASK                        0x0001  /* RDRO */
+#define WM8400_RDRO_SHIFT                            0  /* RDRO */
+#define WM8400_RDRO_WIDTH                            1  /* RDRO */
+
+/*
+ * R47 (0x2F) - Output Mixer3
+ */
+#define WM8400_LLI3LOVOL_MASK                   0x01C0  /* LLI3LOVOL - [8:6] */
+#define WM8400_LLI3LOVOL_SHIFT                       6  /* LLI3LOVOL - [8:6] */
+#define WM8400_LLI3LOVOL_WIDTH                       3  /* LLI3LOVOL - [8:6] */
+#define WM8400_LR12LOVOL_MASK                   0x0038  /* LR12LOVOL - [5:3] */
+#define WM8400_LR12LOVOL_SHIFT                       3  /* LR12LOVOL - [5:3] */
+#define WM8400_LR12LOVOL_WIDTH                       3  /* LR12LOVOL - [5:3] */
+#define WM8400_LL12LOVOL_MASK                   0x0007  /* LL12LOVOL - [2:0] */
+#define WM8400_LL12LOVOL_SHIFT                       0  /* LL12LOVOL - [2:0] */
+#define WM8400_LL12LOVOL_WIDTH                       3  /* LL12LOVOL - [2:0] */
+
+/*
+ * R48 (0x30) - Output Mixer4
+ */
+#define WM8400_RRI3ROVOL_MASK                   0x01C0  /* RRI3ROVOL - [8:6] */
+#define WM8400_RRI3ROVOL_SHIFT                       6  /* RRI3ROVOL - [8:6] */
+#define WM8400_RRI3ROVOL_WIDTH                       3  /* RRI3ROVOL - [8:6] */
+#define WM8400_RL12ROVOL_MASK                   0x0038  /* RL12ROVOL - [5:3] */
+#define WM8400_RL12ROVOL_SHIFT                       3  /* RL12ROVOL - [5:3] */
+#define WM8400_RL12ROVOL_WIDTH                       3  /* RL12ROVOL - [5:3] */
+#define WM8400_RR12ROVOL_MASK                   0x0007  /* RR12ROVOL - [2:0] */
+#define WM8400_RR12ROVOL_SHIFT                       0  /* RR12ROVOL - [2:0] */
+#define WM8400_RR12ROVOL_WIDTH                       3  /* RR12ROVOL - [2:0] */
+
+/*
+ * R49 (0x31) - Output Mixer5
+ */
+#define WM8400_LRI3LOVOL_MASK                   0x01C0  /* LRI3LOVOL - [8:6] */
+#define WM8400_LRI3LOVOL_SHIFT                       6  /* LRI3LOVOL - [8:6] */
+#define WM8400_LRI3LOVOL_WIDTH                       3  /* LRI3LOVOL - [8:6] */
+#define WM8400_LRBLOVOL_MASK                    0x0038  /* LRBLOVOL - [5:3] */
+#define WM8400_LRBLOVOL_SHIFT                        3  /* LRBLOVOL - [5:3] */
+#define WM8400_LRBLOVOL_WIDTH                        3  /* LRBLOVOL - [5:3] */
+#define WM8400_LLBLOVOL_MASK                    0x0007  /* LLBLOVOL - [2:0] */
+#define WM8400_LLBLOVOL_SHIFT                        0  /* LLBLOVOL - [2:0] */
+#define WM8400_LLBLOVOL_WIDTH                        3  /* LLBLOVOL - [2:0] */
+
+/*
+ * R50 (0x32) - Output Mixer6
+ */
+#define WM8400_RLI3ROVOL_MASK                   0x01C0  /* RLI3ROVOL - [8:6] */
+#define WM8400_RLI3ROVOL_SHIFT                       6  /* RLI3ROVOL - [8:6] */
+#define WM8400_RLI3ROVOL_WIDTH                       3  /* RLI3ROVOL - [8:6] */
+#define WM8400_RLBROVOL_MASK                    0x0038  /* RLBROVOL - [5:3] */
+#define WM8400_RLBROVOL_SHIFT                        3  /* RLBROVOL - [5:3] */
+#define WM8400_RLBROVOL_WIDTH                        3  /* RLBROVOL - [5:3] */
+#define WM8400_RRBROVOL_MASK                    0x0007  /* RRBROVOL - [2:0] */
+#define WM8400_RRBROVOL_SHIFT                        0  /* RRBROVOL - [2:0] */
+#define WM8400_RRBROVOL_WIDTH                        3  /* RRBROVOL - [2:0] */
+
+/*
+ * R51 (0x33) - Out3/4 Mixer
+ */
+#define WM8400_VSEL_MASK                        0x0180  /* VSEL - [8:7] */
+#define WM8400_VSEL_SHIFT                            7  /* VSEL - [8:7] */
+#define WM8400_VSEL_WIDTH                            2  /* VSEL - [8:7] */
+#define WM8400_LI4O3                            0x0020  /* LI4O3 */
+#define WM8400_LI4O3_MASK                       0x0020  /* LI4O3 */
+#define WM8400_LI4O3_SHIFT                           5  /* LI4O3 */
+#define WM8400_LI4O3_WIDTH                           1  /* LI4O3 */
+#define WM8400_LPGAO3                           0x0010  /* LPGAO3 */
+#define WM8400_LPGAO3_MASK                      0x0010  /* LPGAO3 */
+#define WM8400_LPGAO3_SHIFT                          4  /* LPGAO3 */
+#define WM8400_LPGAO3_WIDTH                          1  /* LPGAO3 */
+#define WM8400_RI4O4                            0x0002  /* RI4O4 */
+#define WM8400_RI4O4_MASK                       0x0002  /* RI4O4 */
+#define WM8400_RI4O4_SHIFT                           1  /* RI4O4 */
+#define WM8400_RI4O4_WIDTH                           1  /* RI4O4 */
+#define WM8400_RPGAO4                           0x0001  /* RPGAO4 */
+#define WM8400_RPGAO4_MASK                      0x0001  /* RPGAO4 */
+#define WM8400_RPGAO4_SHIFT                          0  /* RPGAO4 */
+#define WM8400_RPGAO4_WIDTH                          1  /* RPGAO4 */
+
+/*
+ * R52 (0x34) - Line Mixer1
+ */
+#define WM8400_LLOPGALON                        0x0040  /* LLOPGALON */
+#define WM8400_LLOPGALON_MASK                   0x0040  /* LLOPGALON */
+#define WM8400_LLOPGALON_SHIFT                       6  /* LLOPGALON */
+#define WM8400_LLOPGALON_WIDTH                       1  /* LLOPGALON */
+#define WM8400_LROPGALON                        0x0020  /* LROPGALON */
+#define WM8400_LROPGALON_MASK                   0x0020  /* LROPGALON */
+#define WM8400_LROPGALON_SHIFT                       5  /* LROPGALON */
+#define WM8400_LROPGALON_WIDTH                       1  /* LROPGALON */
+#define WM8400_LOPLON                           0x0010  /* LOPLON */
+#define WM8400_LOPLON_MASK                      0x0010  /* LOPLON */
+#define WM8400_LOPLON_SHIFT                          4  /* LOPLON */
+#define WM8400_LOPLON_WIDTH                          1  /* LOPLON */
+#define WM8400_LR12LOP                          0x0004  /* LR12LOP */
+#define WM8400_LR12LOP_MASK                     0x0004  /* LR12LOP */
+#define WM8400_LR12LOP_SHIFT                         2  /* LR12LOP */
+#define WM8400_LR12LOP_WIDTH                         1  /* LR12LOP */
+#define WM8400_LL12LOP                          0x0002  /* LL12LOP */
+#define WM8400_LL12LOP_MASK                     0x0002  /* LL12LOP */
+#define WM8400_LL12LOP_SHIFT                         1  /* LL12LOP */
+#define WM8400_LL12LOP_WIDTH                         1  /* LL12LOP */
+#define WM8400_LLOPGALOP                        0x0001  /* LLOPGALOP */
+#define WM8400_LLOPGALOP_MASK                   0x0001  /* LLOPGALOP */
+#define WM8400_LLOPGALOP_SHIFT                       0  /* LLOPGALOP */
+#define WM8400_LLOPGALOP_WIDTH                       1  /* LLOPGALOP */
+
+/*
+ * R53 (0x35) - Line Mixer2
+ */
+#define WM8400_RROPGARON                        0x0040  /* RROPGARON */
+#define WM8400_RROPGARON_MASK                   0x0040  /* RROPGARON */
+#define WM8400_RROPGARON_SHIFT                       6  /* RROPGARON */
+#define WM8400_RROPGARON_WIDTH                       1  /* RROPGARON */
+#define WM8400_RLOPGARON                        0x0020  /* RLOPGARON */
+#define WM8400_RLOPGARON_MASK                   0x0020  /* RLOPGARON */
+#define WM8400_RLOPGARON_SHIFT                       5  /* RLOPGARON */
+#define WM8400_RLOPGARON_WIDTH                       1  /* RLOPGARON */
+#define WM8400_ROPRON                           0x0010  /* ROPRON */
+#define WM8400_ROPRON_MASK                      0x0010  /* ROPRON */
+#define WM8400_ROPRON_SHIFT                          4  /* ROPRON */
+#define WM8400_ROPRON_WIDTH                          1  /* ROPRON */
+#define WM8400_RL12ROP                          0x0004  /* RL12ROP */
+#define WM8400_RL12ROP_MASK                     0x0004  /* RL12ROP */
+#define WM8400_RL12ROP_SHIFT                         2  /* RL12ROP */
+#define WM8400_RL12ROP_WIDTH                         1  /* RL12ROP */
+#define WM8400_RR12ROP                          0x0002  /* RR12ROP */
+#define WM8400_RR12ROP_MASK                     0x0002  /* RR12ROP */
+#define WM8400_RR12ROP_SHIFT                         1  /* RR12ROP */
+#define WM8400_RR12ROP_WIDTH                         1  /* RR12ROP */
+#define WM8400_RROPGAROP                        0x0001  /* RROPGAROP */
+#define WM8400_RROPGAROP_MASK                   0x0001  /* RROPGAROP */
+#define WM8400_RROPGAROP_SHIFT                       0  /* RROPGAROP */
+#define WM8400_RROPGAROP_WIDTH                       1  /* RROPGAROP */
+
+/*
+ * R54 (0x36) - Speaker Mixer
+ */
+#define WM8400_LB2SPK                           0x0080  /* LB2SPK */
+#define WM8400_LB2SPK_MASK                      0x0080  /* LB2SPK */
+#define WM8400_LB2SPK_SHIFT                          7  /* LB2SPK */
+#define WM8400_LB2SPK_WIDTH                          1  /* LB2SPK */
+#define WM8400_RB2SPK                           0x0040  /* RB2SPK */
+#define WM8400_RB2SPK_MASK                      0x0040  /* RB2SPK */
+#define WM8400_RB2SPK_SHIFT                          6  /* RB2SPK */
+#define WM8400_RB2SPK_WIDTH                          1  /* RB2SPK */
+#define WM8400_LI2SPK                           0x0020  /* LI2SPK */
+#define WM8400_LI2SPK_MASK                      0x0020  /* LI2SPK */
+#define WM8400_LI2SPK_SHIFT                          5  /* LI2SPK */
+#define WM8400_LI2SPK_WIDTH                          1  /* LI2SPK */
+#define WM8400_RI2SPK                           0x0010  /* RI2SPK */
+#define WM8400_RI2SPK_MASK                      0x0010  /* RI2SPK */
+#define WM8400_RI2SPK_SHIFT                          4  /* RI2SPK */
+#define WM8400_RI2SPK_WIDTH                          1  /* RI2SPK */
+#define WM8400_LOPGASPK                         0x0008  /* LOPGASPK */
+#define WM8400_LOPGASPK_MASK                    0x0008  /* LOPGASPK */
+#define WM8400_LOPGASPK_SHIFT                        3  /* LOPGASPK */
+#define WM8400_LOPGASPK_WIDTH                        1  /* LOPGASPK */
+#define WM8400_ROPGASPK                         0x0004  /* ROPGASPK */
+#define WM8400_ROPGASPK_MASK                    0x0004  /* ROPGASPK */
+#define WM8400_ROPGASPK_SHIFT                        2  /* ROPGASPK */
+#define WM8400_ROPGASPK_WIDTH                        1  /* ROPGASPK */
+#define WM8400_LDSPK                            0x0002  /* LDSPK */
+#define WM8400_LDSPK_MASK                       0x0002  /* LDSPK */
+#define WM8400_LDSPK_SHIFT                           1  /* LDSPK */
+#define WM8400_LDSPK_WIDTH                           1  /* LDSPK */
+#define WM8400_RDSPK                            0x0001  /* RDSPK */
+#define WM8400_RDSPK_MASK                       0x0001  /* RDSPK */
+#define WM8400_RDSPK_SHIFT                           0  /* RDSPK */
+#define WM8400_RDSPK_WIDTH                           1  /* RDSPK */
+
+/*
+ * R55 (0x37) - Additional Control
+ */
+#define WM8400_VROI                             0x0001  /* VROI */
+#define WM8400_VROI_MASK                        0x0001  /* VROI */
+#define WM8400_VROI_SHIFT                            0  /* VROI */
+#define WM8400_VROI_WIDTH                            1  /* VROI */
+
+/*
+ * R56 (0x38) - AntiPOP1
+ */
+#define WM8400_DIS_LLINE                        0x0020  /* DIS_LLINE */
+#define WM8400_DIS_LLINE_MASK                   0x0020  /* DIS_LLINE */
+#define WM8400_DIS_LLINE_SHIFT                       5  /* DIS_LLINE */
+#define WM8400_DIS_LLINE_WIDTH                       1  /* DIS_LLINE */
+#define WM8400_DIS_RLINE                        0x0010  /* DIS_RLINE */
+#define WM8400_DIS_RLINE_MASK                   0x0010  /* DIS_RLINE */
+#define WM8400_DIS_RLINE_SHIFT                       4  /* DIS_RLINE */
+#define WM8400_DIS_RLINE_WIDTH                       1  /* DIS_RLINE */
+#define WM8400_DIS_OUT3                         0x0008  /* DIS_OUT3 */
+#define WM8400_DIS_OUT3_MASK                    0x0008  /* DIS_OUT3 */
+#define WM8400_DIS_OUT3_SHIFT                        3  /* DIS_OUT3 */
+#define WM8400_DIS_OUT3_WIDTH                        1  /* DIS_OUT3 */
+#define WM8400_DIS_OUT4                         0x0004  /* DIS_OUT4 */
+#define WM8400_DIS_OUT4_MASK                    0x0004  /* DIS_OUT4 */
+#define WM8400_DIS_OUT4_SHIFT                        2  /* DIS_OUT4 */
+#define WM8400_DIS_OUT4_WIDTH                        1  /* DIS_OUT4 */
+#define WM8400_DIS_LOUT                         0x0002  /* DIS_LOUT */
+#define WM8400_DIS_LOUT_MASK                    0x0002  /* DIS_LOUT */
+#define WM8400_DIS_LOUT_SHIFT                        1  /* DIS_LOUT */
+#define WM8400_DIS_LOUT_WIDTH                        1  /* DIS_LOUT */
+#define WM8400_DIS_ROUT                         0x0001  /* DIS_ROUT */
+#define WM8400_DIS_ROUT_MASK                    0x0001  /* DIS_ROUT */
+#define WM8400_DIS_ROUT_SHIFT                        0  /* DIS_ROUT */
+#define WM8400_DIS_ROUT_WIDTH                        1  /* DIS_ROUT */
+
+/*
+ * R57 (0x39) - AntiPOP2
+ */
+#define WM8400_SOFTST                           0x0040  /* SOFTST */
+#define WM8400_SOFTST_MASK                      0x0040  /* SOFTST */
+#define WM8400_SOFTST_SHIFT                          6  /* SOFTST */
+#define WM8400_SOFTST_WIDTH                          1  /* SOFTST */
+#define WM8400_BUFIOEN                          0x0008  /* BUFIOEN */
+#define WM8400_BUFIOEN_MASK                     0x0008  /* BUFIOEN */
+#define WM8400_BUFIOEN_SHIFT                         3  /* BUFIOEN */
+#define WM8400_BUFIOEN_WIDTH                         1  /* BUFIOEN */
+#define WM8400_BUFDCOPEN                        0x0004  /* BUFDCOPEN */
+#define WM8400_BUFDCOPEN_MASK                   0x0004  /* BUFDCOPEN */
+#define WM8400_BUFDCOPEN_SHIFT                       2  /* BUFDCOPEN */
+#define WM8400_BUFDCOPEN_WIDTH                       1  /* BUFDCOPEN */
+#define WM8400_POBCTRL                          0x0002  /* POBCTRL */
+#define WM8400_POBCTRL_MASK                     0x0002  /* POBCTRL */
+#define WM8400_POBCTRL_SHIFT                         1  /* POBCTRL */
+#define WM8400_POBCTRL_WIDTH                         1  /* POBCTRL */
+#define WM8400_VMIDTOG                          0x0001  /* VMIDTOG */
+#define WM8400_VMIDTOG_MASK                     0x0001  /* VMIDTOG */
+#define WM8400_VMIDTOG_SHIFT                         0  /* VMIDTOG */
+#define WM8400_VMIDTOG_WIDTH                         1  /* VMIDTOG */
+
+/*
+ * R58 (0x3A) - MICBIAS
+ */
+#define WM8400_MCDSCTH_MASK                     0x00C0  /* MCDSCTH - [7:6] */
+#define WM8400_MCDSCTH_SHIFT                         6  /* MCDSCTH - [7:6] */
+#define WM8400_MCDSCTH_WIDTH                         2  /* MCDSCTH - [7:6] */
+#define WM8400_MCDTHR_MASK                      0x0038  /* MCDTHR - [5:3] */
+#define WM8400_MCDTHR_SHIFT                          3  /* MCDTHR - [5:3] */
+#define WM8400_MCDTHR_WIDTH                          3  /* MCDTHR - [5:3] */
+#define WM8400_MCD                              0x0004  /* MCD */
+#define WM8400_MCD_MASK                         0x0004  /* MCD */
+#define WM8400_MCD_SHIFT                             2  /* MCD */
+#define WM8400_MCD_WIDTH                             1  /* MCD */
+#define WM8400_MBSEL                            0x0001  /* MBSEL */
+#define WM8400_MBSEL_MASK                       0x0001  /* MBSEL */
+#define WM8400_MBSEL_SHIFT                           0  /* MBSEL */
+#define WM8400_MBSEL_WIDTH                           1  /* MBSEL */
+
+/*
+ * R60 (0x3C) - FLL Control 1
+ */
+#define WM8400_FLL_REF_FREQ                     0x1000  /* FLL_REF_FREQ */
+#define WM8400_FLL_REF_FREQ_MASK                0x1000  /* FLL_REF_FREQ */
+#define WM8400_FLL_REF_FREQ_SHIFT                   12  /* FLL_REF_FREQ */
+#define WM8400_FLL_REF_FREQ_WIDTH                    1  /* FLL_REF_FREQ */
+#define WM8400_FLL_CLK_SRC_MASK                 0x0C00  /* FLL_CLK_SRC - [11:10] */
+#define WM8400_FLL_CLK_SRC_SHIFT                    10  /* FLL_CLK_SRC - [11:10] */
+#define WM8400_FLL_CLK_SRC_WIDTH                     2  /* FLL_CLK_SRC - [11:10] */
+#define WM8400_FLL_FRAC                         0x0200  /* FLL_FRAC */
+#define WM8400_FLL_FRAC_MASK                    0x0200  /* FLL_FRAC */
+#define WM8400_FLL_FRAC_SHIFT                        9  /* FLL_FRAC */
+#define WM8400_FLL_FRAC_WIDTH                        1  /* FLL_FRAC */
+#define WM8400_FLL_OSC_ENA                      0x0100  /* FLL_OSC_ENA */
+#define WM8400_FLL_OSC_ENA_MASK                 0x0100  /* FLL_OSC_ENA */
+#define WM8400_FLL_OSC_ENA_SHIFT                     8  /* FLL_OSC_ENA */
+#define WM8400_FLL_OSC_ENA_WIDTH                     1  /* FLL_OSC_ENA */
+#define WM8400_FLL_CTRL_RATE_MASK               0x00E0  /* FLL_CTRL_RATE - [7:5] */
+#define WM8400_FLL_CTRL_RATE_SHIFT                   5  /* FLL_CTRL_RATE - [7:5] */
+#define WM8400_FLL_CTRL_RATE_WIDTH                   3  /* FLL_CTRL_RATE - [7:5] */
+#define WM8400_FLL_FRATIO_MASK                  0x001F  /* FLL_FRATIO - [4:0] */
+#define WM8400_FLL_FRATIO_SHIFT                      0  /* FLL_FRATIO - [4:0] */
+#define WM8400_FLL_FRATIO_WIDTH                      5  /* FLL_FRATIO - [4:0] */
+
+/*
+ * R61 (0x3D) - FLL Control 2
+ */
+#define WM8400_FLL_K_MASK                       0xFFFF  /* FLL_K - [15:0] */
+#define WM8400_FLL_K_SHIFT                           0  /* FLL_K - [15:0] */
+#define WM8400_FLL_K_WIDTH                          16  /* FLL_K - [15:0] */
+
+/*
+ * R62 (0x3E) - FLL Control 3
+ */
+#define WM8400_FLL_N_MASK                       0x03FF  /* FLL_N - [9:0] */
+#define WM8400_FLL_N_SHIFT                           0  /* FLL_N - [9:0] */
+#define WM8400_FLL_N_WIDTH                          10  /* FLL_N - [9:0] */
+
+/*
+ * R63 (0x3F) - FLL Control 4
+ */
+#define WM8400_FLL_TRK_GAIN_MASK                0x0078  /* FLL_TRK_GAIN - [6:3] */
+#define WM8400_FLL_TRK_GAIN_SHIFT                    3  /* FLL_TRK_GAIN - [6:3] */
+#define WM8400_FLL_TRK_GAIN_WIDTH                    4  /* FLL_TRK_GAIN - [6:3] */
+#define WM8400_FLL_OUTDIV_MASK                  0x0007  /* FLL_OUTDIV - [2:0] */
+#define WM8400_FLL_OUTDIV_SHIFT                      0  /* FLL_OUTDIV - [2:0] */
+#define WM8400_FLL_OUTDIV_WIDTH                      3  /* FLL_OUTDIV - [2:0] */
+
+struct wm8400;
+void wm8400_reset_codec_reg_cache(struct wm8400 *wm8400);
+
+#endif
diff --git a/include/linux/mfd/wm8400-private.h b/include/linux/mfd/wm8400-private.h
new file mode 100644
index 00000000..0147b696
--- /dev/null
+++ b/include/linux/mfd/wm8400-private.h
@@ -0,0 +1,935 @@
+/*
+ * wm8400 private definitions.
+ *
+ * Copyright 2008 Wolfson Microelectronics plc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_MFD_WM8400_PRIV_H
+#define __LINUX_MFD_WM8400_PRIV_H
+
+#include <linux/mfd/wm8400.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+
+struct regmap;
+
+#define WM8400_REGISTER_COUNT 0x55
+
+struct wm8400 {
+	struct device *dev;
+
+	struct mutex io_lock;
+	struct regmap *regmap;
+
+	u16 reg_cache[WM8400_REGISTER_COUNT];
+
+	struct platform_device regulators[6];
+};
+
+/*
+ * Register values.
+ */
+#define WM8400_RESET_ID                         0x00
+#define WM8400_ID                               0x01
+#define WM8400_POWER_MANAGEMENT_1               0x02
+#define WM8400_POWER_MANAGEMENT_2               0x03
+#define WM8400_POWER_MANAGEMENT_3               0x04
+#define WM8400_AUDIO_INTERFACE_1                0x05
+#define WM8400_AUDIO_INTERFACE_2                0x06
+#define WM8400_CLOCKING_1                       0x07
+#define WM8400_CLOCKING_2                       0x08
+#define WM8400_AUDIO_INTERFACE_3                0x09
+#define WM8400_AUDIO_INTERFACE_4                0x0A
+#define WM8400_DAC_CTRL                         0x0B
+#define WM8400_LEFT_DAC_DIGITAL_VOLUME          0x0C
+#define WM8400_RIGHT_DAC_DIGITAL_VOLUME         0x0D
+#define WM8400_DIGITAL_SIDE_TONE                0x0E
+#define WM8400_ADC_CTRL                         0x0F
+#define WM8400_LEFT_ADC_DIGITAL_VOLUME          0x10
+#define WM8400_RIGHT_ADC_DIGITAL_VOLUME         0x11
+#define WM8400_GPIO_CTRL_1                      0x12
+#define WM8400_GPIO1_GPIO2                      0x13
+#define WM8400_GPIO3_GPIO4                      0x14
+#define WM8400_GPIO5_GPIO6                      0x15
+#define WM8400_GPIOCTRL_2                       0x16
+#define WM8400_GPIO_POL                         0x17
+#define WM8400_LEFT_LINE_INPUT_1_2_VOLUME       0x18
+#define WM8400_LEFT_LINE_INPUT_3_4_VOLUME       0x19
+#define WM8400_RIGHT_LINE_INPUT_1_2_VOLUME      0x1A
+#define WM8400_RIGHT_LINE_INPUT_3_4_VOLUME      0x1B
+#define WM8400_LEFT_OUTPUT_VOLUME               0x1C
+#define WM8400_RIGHT_OUTPUT_VOLUME              0x1D
+#define WM8400_LINE_OUTPUTS_VOLUME              0x1E
+#define WM8400_OUT3_4_VOLUME                    0x1F
+#define WM8400_LEFT_OPGA_VOLUME                 0x20
+#define WM8400_RIGHT_OPGA_VOLUME                0x21
+#define WM8400_SPEAKER_VOLUME                   0x22
+#define WM8400_CLASSD1                          0x23
+#define WM8400_CLASSD3                          0x25
+#define WM8400_INPUT_MIXER1                     0x27
+#define WM8400_INPUT_MIXER2                     0x28
+#define WM8400_INPUT_MIXER3                     0x29
+#define WM8400_INPUT_MIXER4                     0x2A
+#define WM8400_INPUT_MIXER5                     0x2B
+#define WM8400_INPUT_MIXER6                     0x2C
+#define WM8400_OUTPUT_MIXER1                    0x2D
+#define WM8400_OUTPUT_MIXER2                    0x2E
+#define WM8400_OUTPUT_MIXER3                    0x2F
+#define WM8400_OUTPUT_MIXER4                    0x30
+#define WM8400_OUTPUT_MIXER5                    0x31
+#define WM8400_OUTPUT_MIXER6                    0x32
+#define WM8400_OUT3_4_MIXER                     0x33
+#define WM8400_LINE_MIXER1                      0x34
+#define WM8400_LINE_MIXER2                      0x35
+#define WM8400_SPEAKER_MIXER                    0x36
+#define WM8400_ADDITIONAL_CONTROL               0x37
+#define WM8400_ANTIPOP1                         0x38
+#define WM8400_ANTIPOP2                         0x39
+#define WM8400_MICBIAS                          0x3A
+#define WM8400_FLL_CONTROL_1                    0x3C
+#define WM8400_FLL_CONTROL_2                    0x3D
+#define WM8400_FLL_CONTROL_3                    0x3E
+#define WM8400_FLL_CONTROL_4                    0x3F
+#define WM8400_LDO1_CONTROL                     0x41
+#define WM8400_LDO2_CONTROL                     0x42
+#define WM8400_LDO3_CONTROL                     0x43
+#define WM8400_LDO4_CONTROL                     0x44
+#define WM8400_DCDC1_CONTROL_1                  0x46
+#define WM8400_DCDC1_CONTROL_2                  0x47
+#define WM8400_DCDC2_CONTROL_1                  0x48
+#define WM8400_DCDC2_CONTROL_2                  0x49
+#define WM8400_INTERFACE                        0x4B
+#define WM8400_PM_GENERAL                       0x4C
+#define WM8400_PM_SHUTDOWN_CONTROL              0x4E
+#define WM8400_INTERRUPT_STATUS_1               0x4F
+#define WM8400_INTERRUPT_STATUS_1_MASK          0x50
+#define WM8400_INTERRUPT_LEVELS                 0x51
+#define WM8400_SHUTDOWN_REASON                  0x52
+#define WM8400_LINE_CIRCUITS                    0x54
+
+/*
+ * Field Definitions.
+ */
+
+/*
+ * R0 (0x00) - Reset/ID
+ */
+#define WM8400_SW_RESET_CHIP_ID_MASK            0xFFFF  /* SW_RESET/CHIP_ID - [15:0] */
+#define WM8400_SW_RESET_CHIP_ID_SHIFT                0  /* SW_RESET/CHIP_ID - [15:0] */
+#define WM8400_SW_RESET_CHIP_ID_WIDTH               16  /* SW_RESET/CHIP_ID - [15:0] */
+
+/*
+ * R1 (0x01) - ID
+ */
+#define WM8400_CHIP_REV_MASK                    0x7000  /* CHIP_REV - [14:12] */
+#define WM8400_CHIP_REV_SHIFT                       12  /* CHIP_REV - [14:12] */
+#define WM8400_CHIP_REV_WIDTH                        3  /* CHIP_REV - [14:12] */
+
+/*
+ * R18 (0x12) - GPIO CTRL 1
+ */
+#define WM8400_IRQ                              0x1000  /* IRQ */
+#define WM8400_IRQ_MASK                         0x1000  /* IRQ */
+#define WM8400_IRQ_SHIFT                            12  /* IRQ */
+#define WM8400_IRQ_WIDTH                             1  /* IRQ */
+#define WM8400_TEMPOK                           0x0800  /* TEMPOK */
+#define WM8400_TEMPOK_MASK                      0x0800  /* TEMPOK */
+#define WM8400_TEMPOK_SHIFT                         11  /* TEMPOK */
+#define WM8400_TEMPOK_WIDTH                          1  /* TEMPOK */
+#define WM8400_MIC1SHRT                         0x0400  /* MIC1SHRT */
+#define WM8400_MIC1SHRT_MASK                    0x0400  /* MIC1SHRT */
+#define WM8400_MIC1SHRT_SHIFT                       10  /* MIC1SHRT */
+#define WM8400_MIC1SHRT_WIDTH                        1  /* MIC1SHRT */
+#define WM8400_MIC1DET                          0x0200  /* MIC1DET */
+#define WM8400_MIC1DET_MASK                     0x0200  /* MIC1DET */
+#define WM8400_MIC1DET_SHIFT                         9  /* MIC1DET */
+#define WM8400_MIC1DET_WIDTH                         1  /* MIC1DET */
+#define WM8400_FLL_LCK                          0x0100  /* FLL_LCK */
+#define WM8400_FLL_LCK_MASK                     0x0100  /* FLL_LCK */
+#define WM8400_FLL_LCK_SHIFT                         8  /* FLL_LCK */
+#define WM8400_FLL_LCK_WIDTH                         1  /* FLL_LCK */
+#define WM8400_GPIO_STATUS_MASK                 0x00FF  /* GPIO_STATUS - [7:0] */
+#define WM8400_GPIO_STATUS_SHIFT                     0  /* GPIO_STATUS - [7:0] */
+#define WM8400_GPIO_STATUS_WIDTH                     8  /* GPIO_STATUS - [7:0] */
+
+/*
+ * R19 (0x13) - GPIO1 & GPIO2
+ */
+#define WM8400_GPIO2_DEB_ENA                    0x8000  /* GPIO2_DEB_ENA */
+#define WM8400_GPIO2_DEB_ENA_MASK               0x8000  /* GPIO2_DEB_ENA */
+#define WM8400_GPIO2_DEB_ENA_SHIFT                  15  /* GPIO2_DEB_ENA */
+#define WM8400_GPIO2_DEB_ENA_WIDTH                   1  /* GPIO2_DEB_ENA */
+#define WM8400_GPIO2_IRQ_ENA                    0x4000  /* GPIO2_IRQ_ENA */
+#define WM8400_GPIO2_IRQ_ENA_MASK               0x4000  /* GPIO2_IRQ_ENA */
+#define WM8400_GPIO2_IRQ_ENA_SHIFT                  14  /* GPIO2_IRQ_ENA */
+#define WM8400_GPIO2_IRQ_ENA_WIDTH                   1  /* GPIO2_IRQ_ENA */
+#define WM8400_GPIO2_PU                         0x2000  /* GPIO2_PU */
+#define WM8400_GPIO2_PU_MASK                    0x2000  /* GPIO2_PU */
+#define WM8400_GPIO2_PU_SHIFT                       13  /* GPIO2_PU */
+#define WM8400_GPIO2_PU_WIDTH                        1  /* GPIO2_PU */
+#define WM8400_GPIO2_PD                         0x1000  /* GPIO2_PD */
+#define WM8400_GPIO2_PD_MASK                    0x1000  /* GPIO2_PD */
+#define WM8400_GPIO2_PD_SHIFT                       12  /* GPIO2_PD */
+#define WM8400_GPIO2_PD_WIDTH                        1  /* GPIO2_PD */
+#define WM8400_GPIO2_SEL_MASK                   0x0F00  /* GPIO2_SEL - [11:8] */
+#define WM8400_GPIO2_SEL_SHIFT                       8  /* GPIO2_SEL - [11:8] */
+#define WM8400_GPIO2_SEL_WIDTH                       4  /* GPIO2_SEL - [11:8] */
+#define WM8400_GPIO1_DEB_ENA                    0x0080  /* GPIO1_DEB_ENA */
+#define WM8400_GPIO1_DEB_ENA_MASK               0x0080  /* GPIO1_DEB_ENA */
+#define WM8400_GPIO1_DEB_ENA_SHIFT                   7  /* GPIO1_DEB_ENA */
+#define WM8400_GPIO1_DEB_ENA_WIDTH                   1  /* GPIO1_DEB_ENA */
+#define WM8400_GPIO1_IRQ_ENA                    0x0040  /* GPIO1_IRQ_ENA */
+#define WM8400_GPIO1_IRQ_ENA_MASK               0x0040  /* GPIO1_IRQ_ENA */
+#define WM8400_GPIO1_IRQ_ENA_SHIFT                   6  /* GPIO1_IRQ_ENA */
+#define WM8400_GPIO1_IRQ_ENA_WIDTH                   1  /* GPIO1_IRQ_ENA */
+#define WM8400_GPIO1_PU                         0x0020  /* GPIO1_PU */
+#define WM8400_GPIO1_PU_MASK                    0x0020  /* GPIO1_PU */
+#define WM8400_GPIO1_PU_SHIFT                        5  /* GPIO1_PU */
+#define WM8400_GPIO1_PU_WIDTH                        1  /* GPIO1_PU */
+#define WM8400_GPIO1_PD                         0x0010  /* GPIO1_PD */
+#define WM8400_GPIO1_PD_MASK                    0x0010  /* GPIO1_PD */
+#define WM8400_GPIO1_PD_SHIFT                        4  /* GPIO1_PD */
+#define WM8400_GPIO1_PD_WIDTH                        1  /* GPIO1_PD */
+#define WM8400_GPIO1_SEL_MASK                   0x000F  /* GPIO1_SEL - [3:0] */
+#define WM8400_GPIO1_SEL_SHIFT                       0  /* GPIO1_SEL - [3:0] */
+#define WM8400_GPIO1_SEL_WIDTH                       4  /* GPIO1_SEL - [3:0] */
+
+/*
+ * R20 (0x14) - GPIO3 & GPIO4
+ */
+#define WM8400_GPIO4_DEB_ENA                    0x8000  /* GPIO4_DEB_ENA */
+#define WM8400_GPIO4_DEB_ENA_MASK               0x8000  /* GPIO4_DEB_ENA */
+#define WM8400_GPIO4_DEB_ENA_SHIFT                  15  /* GPIO4_DEB_ENA */
+#define WM8400_GPIO4_DEB_ENA_WIDTH                   1  /* GPIO4_DEB_ENA */
+#define WM8400_GPIO4_IRQ_ENA                    0x4000  /* GPIO4_IRQ_ENA */
+#define WM8400_GPIO4_IRQ_ENA_MASK               0x4000  /* GPIO4_IRQ_ENA */
+#define WM8400_GPIO4_IRQ_ENA_SHIFT                  14  /* GPIO4_IRQ_ENA */
+#define WM8400_GPIO4_IRQ_ENA_WIDTH                   1  /* GPIO4_IRQ_ENA */
+#define WM8400_GPIO4_PU                         0x2000  /* GPIO4_PU */
+#define WM8400_GPIO4_PU_MASK                    0x2000  /* GPIO4_PU */
+#define WM8400_GPIO4_PU_SHIFT                       13  /* GPIO4_PU */
+#define WM8400_GPIO4_PU_WIDTH                        1  /* GPIO4_PU */
+#define WM8400_GPIO4_PD                         0x1000  /* GPIO4_PD */
+#define WM8400_GPIO4_PD_MASK                    0x1000  /* GPIO4_PD */
+#define WM8400_GPIO4_PD_SHIFT                       12  /* GPIO4_PD */
+#define WM8400_GPIO4_PD_WIDTH                        1  /* GPIO4_PD */
+#define WM8400_GPIO4_SEL_MASK                   0x0F00  /* GPIO4_SEL - [11:8] */
+#define WM8400_GPIO4_SEL_SHIFT                       8  /* GPIO4_SEL - [11:8] */
+#define WM8400_GPIO4_SEL_WIDTH                       4  /* GPIO4_SEL - [11:8] */
+#define WM8400_GPIO3_DEB_ENA                    0x0080  /* GPIO3_DEB_ENA */
+#define WM8400_GPIO3_DEB_ENA_MASK               0x0080  /* GPIO3_DEB_ENA */
+#define WM8400_GPIO3_DEB_ENA_SHIFT                   7  /* GPIO3_DEB_ENA */
+#define WM8400_GPIO3_DEB_ENA_WIDTH                   1  /* GPIO3_DEB_ENA */
+#define WM8400_GPIO3_IRQ_ENA                    0x0040  /* GPIO3_IRQ_ENA */
+#define WM8400_GPIO3_IRQ_ENA_MASK               0x0040  /* GPIO3_IRQ_ENA */
+#define WM8400_GPIO3_IRQ_ENA_SHIFT                   6  /* GPIO3_IRQ_ENA */
+#define WM8400_GPIO3_IRQ_ENA_WIDTH                   1  /* GPIO3_IRQ_ENA */
+#define WM8400_GPIO3_PU                         0x0020  /* GPIO3_PU */
+#define WM8400_GPIO3_PU_MASK                    0x0020  /* GPIO3_PU */
+#define WM8400_GPIO3_PU_SHIFT                        5  /* GPIO3_PU */
+#define WM8400_GPIO3_PU_WIDTH                        1  /* GPIO3_PU */
+#define WM8400_GPIO3_PD                         0x0010  /* GPIO3_PD */
+#define WM8400_GPIO3_PD_MASK                    0x0010  /* GPIO3_PD */
+#define WM8400_GPIO3_PD_SHIFT                        4  /* GPIO3_PD */
+#define WM8400_GPIO3_PD_WIDTH                        1  /* GPIO3_PD */
+#define WM8400_GPIO3_SEL_MASK                   0x000F  /* GPIO3_SEL - [3:0] */
+#define WM8400_GPIO3_SEL_SHIFT                       0  /* GPIO3_SEL - [3:0] */
+#define WM8400_GPIO3_SEL_WIDTH                       4  /* GPIO3_SEL - [3:0] */
+
+/*
+ * R21 (0x15) - GPIO5 & GPIO6
+ */
+#define WM8400_GPIO6_DEB_ENA                    0x8000  /* GPIO6_DEB_ENA */
+#define WM8400_GPIO6_DEB_ENA_MASK               0x8000  /* GPIO6_DEB_ENA */
+#define WM8400_GPIO6_DEB_ENA_SHIFT                  15  /* GPIO6_DEB_ENA */
+#define WM8400_GPIO6_DEB_ENA_WIDTH                   1  /* GPIO6_DEB_ENA */
+#define WM8400_GPIO6_IRQ_ENA                    0x4000  /* GPIO6_IRQ_ENA */
+#define WM8400_GPIO6_IRQ_ENA_MASK               0x4000  /* GPIO6_IRQ_ENA */
+#define WM8400_GPIO6_IRQ_ENA_SHIFT                  14  /* GPIO6_IRQ_ENA */
+#define WM8400_GPIO6_IRQ_ENA_WIDTH                   1  /* GPIO6_IRQ_ENA */
+#define WM8400_GPIO6_PU                         0x2000  /* GPIO6_PU */
+#define WM8400_GPIO6_PU_MASK                    0x2000  /* GPIO6_PU */
+#define WM8400_GPIO6_PU_SHIFT                       13  /* GPIO6_PU */
+#define WM8400_GPIO6_PU_WIDTH                        1  /* GPIO6_PU */
+#define WM8400_GPIO6_PD                         0x1000  /* GPIO6_PD */
+#define WM8400_GPIO6_PD_MASK                    0x1000  /* GPIO6_PD */
+#define WM8400_GPIO6_PD_SHIFT                       12  /* GPIO6_PD */
+#define WM8400_GPIO6_PD_WIDTH                        1  /* GPIO6_PD */
+#define WM8400_GPIO6_SEL_MASK                   0x0F00  /* GPIO6_SEL - [11:8] */
+#define WM8400_GPIO6_SEL_SHIFT                       8  /* GPIO6_SEL - [11:8] */
+#define WM8400_GPIO6_SEL_WIDTH                       4  /* GPIO6_SEL - [11:8] */
+#define WM8400_GPIO5_DEB_ENA                    0x0080  /* GPIO5_DEB_ENA */
+#define WM8400_GPIO5_DEB_ENA_MASK               0x0080  /* GPIO5_DEB_ENA */
+#define WM8400_GPIO5_DEB_ENA_SHIFT                   7  /* GPIO5_DEB_ENA */
+#define WM8400_GPIO5_DEB_ENA_WIDTH                   1  /* GPIO5_DEB_ENA */
+#define WM8400_GPIO5_IRQ_ENA                    0x0040  /* GPIO5_IRQ_ENA */
+#define WM8400_GPIO5_IRQ_ENA_MASK               0x0040  /* GPIO5_IRQ_ENA */
+#define WM8400_GPIO5_IRQ_ENA_SHIFT                   6  /* GPIO5_IRQ_ENA */
+#define WM8400_GPIO5_IRQ_ENA_WIDTH                   1  /* GPIO5_IRQ_ENA */
+#define WM8400_GPIO5_PU                         0x0020  /* GPIO5_PU */
+#define WM8400_GPIO5_PU_MASK                    0x0020  /* GPIO5_PU */
+#define WM8400_GPIO5_PU_SHIFT                        5  /* GPIO5_PU */
+#define WM8400_GPIO5_PU_WIDTH                        1  /* GPIO5_PU */
+#define WM8400_GPIO5_PD                         0x0010  /* GPIO5_PD */
+#define WM8400_GPIO5_PD_MASK                    0x0010  /* GPIO5_PD */
+#define WM8400_GPIO5_PD_SHIFT                        4  /* GPIO5_PD */
+#define WM8400_GPIO5_PD_WIDTH                        1  /* GPIO5_PD */
+#define WM8400_GPIO5_SEL_MASK                   0x000F  /* GPIO5_SEL - [3:0] */
+#define WM8400_GPIO5_SEL_SHIFT                       0  /* GPIO5_SEL - [3:0] */
+#define WM8400_GPIO5_SEL_WIDTH                       4  /* GPIO5_SEL - [3:0] */
+
+/*
+ * R22 (0x16) - GPIOCTRL 2
+ */
+#define WM8400_TEMPOK_IRQ_ENA                   0x0800  /* TEMPOK_IRQ_ENA */
+#define WM8400_TEMPOK_IRQ_ENA_MASK              0x0800  /* TEMPOK_IRQ_ENA */
+#define WM8400_TEMPOK_IRQ_ENA_SHIFT                 11  /* TEMPOK_IRQ_ENA */
+#define WM8400_TEMPOK_IRQ_ENA_WIDTH                  1  /* TEMPOK_IRQ_ENA */
+#define WM8400_MIC1SHRT_IRQ_ENA                 0x0400  /* MIC1SHRT_IRQ_ENA */
+#define WM8400_MIC1SHRT_IRQ_ENA_MASK            0x0400  /* MIC1SHRT_IRQ_ENA */
+#define WM8400_MIC1SHRT_IRQ_ENA_SHIFT               10  /* MIC1SHRT_IRQ_ENA */
+#define WM8400_MIC1SHRT_IRQ_ENA_WIDTH                1  /* MIC1SHRT_IRQ_ENA */
+#define WM8400_MIC1DET_IRQ_ENA                  0x0200  /* MIC1DET_IRQ_ENA */
+#define WM8400_MIC1DET_IRQ_ENA_MASK             0x0200  /* MIC1DET_IRQ_ENA */
+#define WM8400_MIC1DET_IRQ_ENA_SHIFT                 9  /* MIC1DET_IRQ_ENA */
+#define WM8400_MIC1DET_IRQ_ENA_WIDTH                 1  /* MIC1DET_IRQ_ENA */
+#define WM8400_FLL_LCK_IRQ_ENA                  0x0100  /* FLL_LCK_IRQ_ENA */
+#define WM8400_FLL_LCK_IRQ_ENA_MASK             0x0100  /* FLL_LCK_IRQ_ENA */
+#define WM8400_FLL_LCK_IRQ_ENA_SHIFT                 8  /* FLL_LCK_IRQ_ENA */
+#define WM8400_FLL_LCK_IRQ_ENA_WIDTH                 1  /* FLL_LCK_IRQ_ENA */
+#define WM8400_GPI8_DEB_ENA                     0x0080  /* GPI8_DEB_ENA */
+#define WM8400_GPI8_DEB_ENA_MASK                0x0080  /* GPI8_DEB_ENA */
+#define WM8400_GPI8_DEB_ENA_SHIFT                    7  /* GPI8_DEB_ENA */
+#define WM8400_GPI8_DEB_ENA_WIDTH                    1  /* GPI8_DEB_ENA */
+#define WM8400_GPI8_IRQ_ENA                     0x0040  /* GPI8_IRQ_ENA */
+#define WM8400_GPI8_IRQ_ENA_MASK                0x0040  /* GPI8_IRQ_ENA */
+#define WM8400_GPI8_IRQ_ENA_SHIFT                    6  /* GPI8_IRQ_ENA */
+#define WM8400_GPI8_IRQ_ENA_WIDTH                    1  /* GPI8_IRQ_ENA */
+#define WM8400_GPI8_ENA                         0x0010  /* GPI8_ENA */
+#define WM8400_GPI8_ENA_MASK                    0x0010  /* GPI8_ENA */
+#define WM8400_GPI8_ENA_SHIFT                        4  /* GPI8_ENA */
+#define WM8400_GPI8_ENA_WIDTH                        1  /* GPI8_ENA */
+#define WM8400_GPI7_DEB_ENA                     0x0008  /* GPI7_DEB_ENA */
+#define WM8400_GPI7_DEB_ENA_MASK                0x0008  /* GPI7_DEB_ENA */
+#define WM8400_GPI7_DEB_ENA_SHIFT                    3  /* GPI7_DEB_ENA */
+#define WM8400_GPI7_DEB_ENA_WIDTH                    1  /* GPI7_DEB_ENA */
+#define WM8400_GPI7_IRQ_ENA                     0x0004  /* GPI7_IRQ_ENA */
+#define WM8400_GPI7_IRQ_ENA_MASK                0x0004  /* GPI7_IRQ_ENA */
+#define WM8400_GPI7_IRQ_ENA_SHIFT                    2  /* GPI7_IRQ_ENA */
+#define WM8400_GPI7_IRQ_ENA_WIDTH                    1  /* GPI7_IRQ_ENA */
+#define WM8400_GPI7_ENA                         0x0001  /* GPI7_ENA */
+#define WM8400_GPI7_ENA_MASK                    0x0001  /* GPI7_ENA */
+#define WM8400_GPI7_ENA_SHIFT                        0  /* GPI7_ENA */
+#define WM8400_GPI7_ENA_WIDTH                        1  /* GPI7_ENA */
+
+/*
+ * R23 (0x17) - GPIO_POL
+ */
+#define WM8400_IRQ_INV                          0x1000  /* IRQ_INV */
+#define WM8400_IRQ_INV_MASK                     0x1000  /* IRQ_INV */
+#define WM8400_IRQ_INV_SHIFT                        12  /* IRQ_INV */
+#define WM8400_IRQ_INV_WIDTH                         1  /* IRQ_INV */
+#define WM8400_TEMPOK_POL                       0x0800  /* TEMPOK_POL */
+#define WM8400_TEMPOK_POL_MASK                  0x0800  /* TEMPOK_POL */
+#define WM8400_TEMPOK_POL_SHIFT                     11  /* TEMPOK_POL */
+#define WM8400_TEMPOK_POL_WIDTH                      1  /* TEMPOK_POL */
+#define WM8400_MIC1SHRT_POL                     0x0400  /* MIC1SHRT_POL */
+#define WM8400_MIC1SHRT_POL_MASK                0x0400  /* MIC1SHRT_POL */
+#define WM8400_MIC1SHRT_POL_SHIFT                   10  /* MIC1SHRT_POL */
+#define WM8400_MIC1SHRT_POL_WIDTH                    1  /* MIC1SHRT_POL */
+#define WM8400_MIC1DET_POL                      0x0200  /* MIC1DET_POL */
+#define WM8400_MIC1DET_POL_MASK                 0x0200  /* MIC1DET_POL */
+#define WM8400_MIC1DET_POL_SHIFT                     9  /* MIC1DET_POL */
+#define WM8400_MIC1DET_POL_WIDTH                     1  /* MIC1DET_POL */
+#define WM8400_FLL_LCK_POL                      0x0100  /* FLL_LCK_POL */
+#define WM8400_FLL_LCK_POL_MASK                 0x0100  /* FLL_LCK_POL */
+#define WM8400_FLL_LCK_POL_SHIFT                     8  /* FLL_LCK_POL */
+#define WM8400_FLL_LCK_POL_WIDTH                     1  /* FLL_LCK_POL */
+#define WM8400_GPIO_POL_MASK                    0x00FF  /* GPIO_POL - [7:0] */
+#define WM8400_GPIO_POL_SHIFT                        0  /* GPIO_POL - [7:0] */
+#define WM8400_GPIO_POL_WIDTH                        8  /* GPIO_POL - [7:0] */
+
+/*
+ * R65 (0x41) - LDO 1 Control
+ */
+#define WM8400_LDO1_ENA                         0x8000  /* LDO1_ENA */
+#define WM8400_LDO1_ENA_MASK                    0x8000  /* LDO1_ENA */
+#define WM8400_LDO1_ENA_SHIFT                       15  /* LDO1_ENA */
+#define WM8400_LDO1_ENA_WIDTH                        1  /* LDO1_ENA */
+#define WM8400_LDO1_SWI                         0x4000  /* LDO1_SWI */
+#define WM8400_LDO1_SWI_MASK                    0x4000  /* LDO1_SWI */
+#define WM8400_LDO1_SWI_SHIFT                       14  /* LDO1_SWI */
+#define WM8400_LDO1_SWI_WIDTH                        1  /* LDO1_SWI */
+#define WM8400_LDO1_OPFLT                       0x1000  /* LDO1_OPFLT */
+#define WM8400_LDO1_OPFLT_MASK                  0x1000  /* LDO1_OPFLT */
+#define WM8400_LDO1_OPFLT_SHIFT                     12  /* LDO1_OPFLT */
+#define WM8400_LDO1_OPFLT_WIDTH                      1  /* LDO1_OPFLT */
+#define WM8400_LDO1_ERRACT                      0x0800  /* LDO1_ERRACT */
+#define WM8400_LDO1_ERRACT_MASK                 0x0800  /* LDO1_ERRACT */
+#define WM8400_LDO1_ERRACT_SHIFT                    11  /* LDO1_ERRACT */
+#define WM8400_LDO1_ERRACT_WIDTH                     1  /* LDO1_ERRACT */
+#define WM8400_LDO1_HIB_MODE                    0x0400  /* LDO1_HIB_MODE */
+#define WM8400_LDO1_HIB_MODE_MASK               0x0400  /* LDO1_HIB_MODE */
+#define WM8400_LDO1_HIB_MODE_SHIFT                  10  /* LDO1_HIB_MODE */
+#define WM8400_LDO1_HIB_MODE_WIDTH                   1  /* LDO1_HIB_MODE */
+#define WM8400_LDO1_VIMG_MASK                   0x03E0  /* LDO1_VIMG - [9:5] */
+#define WM8400_LDO1_VIMG_SHIFT                       5  /* LDO1_VIMG - [9:5] */
+#define WM8400_LDO1_VIMG_WIDTH                       5  /* LDO1_VIMG - [9:5] */
+#define WM8400_LDO1_VSEL_MASK                   0x001F  /* LDO1_VSEL - [4:0] */
+#define WM8400_LDO1_VSEL_SHIFT                       0  /* LDO1_VSEL - [4:0] */
+#define WM8400_LDO1_VSEL_WIDTH                       5  /* LDO1_VSEL - [4:0] */
+
+/*
+ * R66 (0x42) - LDO 2 Control
+ */
+#define WM8400_LDO2_ENA                         0x8000  /* LDO2_ENA */
+#define WM8400_LDO2_ENA_MASK                    0x8000  /* LDO2_ENA */
+#define WM8400_LDO2_ENA_SHIFT                       15  /* LDO2_ENA */
+#define WM8400_LDO2_ENA_WIDTH                        1  /* LDO2_ENA */
+#define WM8400_LDO2_SWI                         0x4000  /* LDO2_SWI */
+#define WM8400_LDO2_SWI_MASK                    0x4000  /* LDO2_SWI */
+#define WM8400_LDO2_SWI_SHIFT                       14  /* LDO2_SWI */
+#define WM8400_LDO2_SWI_WIDTH                        1  /* LDO2_SWI */
+#define WM8400_LDO2_OPFLT                       0x1000  /* LDO2_OPFLT */
+#define WM8400_LDO2_OPFLT_MASK                  0x1000  /* LDO2_OPFLT */
+#define WM8400_LDO2_OPFLT_SHIFT                     12  /* LDO2_OPFLT */
+#define WM8400_LDO2_OPFLT_WIDTH                      1  /* LDO2_OPFLT */
+#define WM8400_LDO2_ERRACT                      0x0800  /* LDO2_ERRACT */
+#define WM8400_LDO2_ERRACT_MASK                 0x0800  /* LDO2_ERRACT */
+#define WM8400_LDO2_ERRACT_SHIFT                    11  /* LDO2_ERRACT */
+#define WM8400_LDO2_ERRACT_WIDTH                     1  /* LDO2_ERRACT */
+#define WM8400_LDO2_HIB_MODE                    0x0400  /* LDO2_HIB_MODE */
+#define WM8400_LDO2_HIB_MODE_MASK               0x0400  /* LDO2_HIB_MODE */
+#define WM8400_LDO2_HIB_MODE_SHIFT                  10  /* LDO2_HIB_MODE */
+#define WM8400_LDO2_HIB_MODE_WIDTH                   1  /* LDO2_HIB_MODE */
+#define WM8400_LDO2_VIMG_MASK                   0x03E0  /* LDO2_VIMG - [9:5] */
+#define WM8400_LDO2_VIMG_SHIFT                       5  /* LDO2_VIMG - [9:5] */
+#define WM8400_LDO2_VIMG_WIDTH                       5  /* LDO2_VIMG - [9:5] */
+#define WM8400_LDO2_VSEL_MASK                   0x001F  /* LDO2_VSEL - [4:0] */
+#define WM8400_LDO2_VSEL_SHIFT                       0  /* LDO2_VSEL - [4:0] */
+#define WM8400_LDO2_VSEL_WIDTH                       5  /* LDO2_VSEL - [4:0] */
+
+/*
+ * R67 (0x43) - LDO 3 Control
+ */
+#define WM8400_LDO3_ENA                         0x8000  /* LDO3_ENA */
+#define WM8400_LDO3_ENA_MASK                    0x8000  /* LDO3_ENA */
+#define WM8400_LDO3_ENA_SHIFT                       15  /* LDO3_ENA */
+#define WM8400_LDO3_ENA_WIDTH                        1  /* LDO3_ENA */
+#define WM8400_LDO3_SWI                         0x4000  /* LDO3_SWI */
+#define WM8400_LDO3_SWI_MASK                    0x4000  /* LDO3_SWI */
+#define WM8400_LDO3_SWI_SHIFT                       14  /* LDO3_SWI */
+#define WM8400_LDO3_SWI_WIDTH                        1  /* LDO3_SWI */
+#define WM8400_LDO3_OPFLT                       0x1000  /* LDO3_OPFLT */
+#define WM8400_LDO3_OPFLT_MASK                  0x1000  /* LDO3_OPFLT */
+#define WM8400_LDO3_OPFLT_SHIFT                     12  /* LDO3_OPFLT */
+#define WM8400_LDO3_OPFLT_WIDTH                      1  /* LDO3_OPFLT */
+#define WM8400_LDO3_ERRACT                      0x0800  /* LDO3_ERRACT */
+#define WM8400_LDO3_ERRACT_MASK                 0x0800  /* LDO3_ERRACT */
+#define WM8400_LDO3_ERRACT_SHIFT                    11  /* LDO3_ERRACT */
+#define WM8400_LDO3_ERRACT_WIDTH                     1  /* LDO3_ERRACT */
+#define WM8400_LDO3_HIB_MODE                    0x0400  /* LDO3_HIB_MODE */
+#define WM8400_LDO3_HIB_MODE_MASK               0x0400  /* LDO3_HIB_MODE */
+#define WM8400_LDO3_HIB_MODE_SHIFT                  10  /* LDO3_HIB_MODE */
+#define WM8400_LDO3_HIB_MODE_WIDTH                   1  /* LDO3_HIB_MODE */
+#define WM8400_LDO3_VIMG_MASK                   0x03E0  /* LDO3_VIMG - [9:5] */
+#define WM8400_LDO3_VIMG_SHIFT                       5  /* LDO3_VIMG - [9:5] */
+#define WM8400_LDO3_VIMG_WIDTH                       5  /* LDO3_VIMG - [9:5] */
+#define WM8400_LDO3_VSEL_MASK                   0x001F  /* LDO3_VSEL - [4:0] */
+#define WM8400_LDO3_VSEL_SHIFT                       0  /* LDO3_VSEL - [4:0] */
+#define WM8400_LDO3_VSEL_WIDTH                       5  /* LDO3_VSEL - [4:0] */
+
+/*
+ * R68 (0x44) - LDO 4 Control
+ */
+#define WM8400_LDO4_ENA                         0x8000  /* LDO4_ENA */
+#define WM8400_LDO4_ENA_MASK                    0x8000  /* LDO4_ENA */
+#define WM8400_LDO4_ENA_SHIFT                       15  /* LDO4_ENA */
+#define WM8400_LDO4_ENA_WIDTH                        1  /* LDO4_ENA */
+#define WM8400_LDO4_SWI                         0x4000  /* LDO4_SWI */
+#define WM8400_LDO4_SWI_MASK                    0x4000  /* LDO4_SWI */
+#define WM8400_LDO4_SWI_SHIFT                       14  /* LDO4_SWI */
+#define WM8400_LDO4_SWI_WIDTH                        1  /* LDO4_SWI */
+#define WM8400_LDO4_OPFLT                       0x1000  /* LDO4_OPFLT */
+#define WM8400_LDO4_OPFLT_MASK                  0x1000  /* LDO4_OPFLT */
+#define WM8400_LDO4_OPFLT_SHIFT                     12  /* LDO4_OPFLT */
+#define WM8400_LDO4_OPFLT_WIDTH                      1  /* LDO4_OPFLT */
+#define WM8400_LDO4_ERRACT                      0x0800  /* LDO4_ERRACT */
+#define WM8400_LDO4_ERRACT_MASK                 0x0800  /* LDO4_ERRACT */
+#define WM8400_LDO4_ERRACT_SHIFT                    11  /* LDO4_ERRACT */
+#define WM8400_LDO4_ERRACT_WIDTH                     1  /* LDO4_ERRACT */
+#define WM8400_LDO4_HIB_MODE                    0x0400  /* LDO4_HIB_MODE */
+#define WM8400_LDO4_HIB_MODE_MASK               0x0400  /* LDO4_HIB_MODE */
+#define WM8400_LDO4_HIB_MODE_SHIFT                  10  /* LDO4_HIB_MODE */
+#define WM8400_LDO4_HIB_MODE_WIDTH                   1  /* LDO4_HIB_MODE */
+#define WM8400_LDO4_VIMG_MASK                   0x03E0  /* LDO4_VIMG - [9:5] */
+#define WM8400_LDO4_VIMG_SHIFT                       5  /* LDO4_VIMG - [9:5] */
+#define WM8400_LDO4_VIMG_WIDTH                       5  /* LDO4_VIMG - [9:5] */
+#define WM8400_LDO4_VSEL_MASK                   0x001F  /* LDO4_VSEL - [4:0] */
+#define WM8400_LDO4_VSEL_SHIFT                       0  /* LDO4_VSEL - [4:0] */
+#define WM8400_LDO4_VSEL_WIDTH                       5  /* LDO4_VSEL - [4:0] */
+
+/*
+ * R70 (0x46) - DCDC1 Control 1
+ */
+#define WM8400_DC1_ENA                          0x8000  /* DC1_ENA */
+#define WM8400_DC1_ENA_MASK                     0x8000  /* DC1_ENA */
+#define WM8400_DC1_ENA_SHIFT                        15  /* DC1_ENA */
+#define WM8400_DC1_ENA_WIDTH                         1  /* DC1_ENA */
+#define WM8400_DC1_ACTIVE                       0x4000  /* DC1_ACTIVE */
+#define WM8400_DC1_ACTIVE_MASK                  0x4000  /* DC1_ACTIVE */
+#define WM8400_DC1_ACTIVE_SHIFT                     14  /* DC1_ACTIVE */
+#define WM8400_DC1_ACTIVE_WIDTH                      1  /* DC1_ACTIVE */
+#define WM8400_DC1_SLEEP                        0x2000  /* DC1_SLEEP */
+#define WM8400_DC1_SLEEP_MASK                   0x2000  /* DC1_SLEEP */
+#define WM8400_DC1_SLEEP_SHIFT                      13  /* DC1_SLEEP */
+#define WM8400_DC1_SLEEP_WIDTH                       1  /* DC1_SLEEP */
+#define WM8400_DC1_OPFLT                        0x1000  /* DC1_OPFLT */
+#define WM8400_DC1_OPFLT_MASK                   0x1000  /* DC1_OPFLT */
+#define WM8400_DC1_OPFLT_SHIFT                      12  /* DC1_OPFLT */
+#define WM8400_DC1_OPFLT_WIDTH                       1  /* DC1_OPFLT */
+#define WM8400_DC1_ERRACT                       0x0800  /* DC1_ERRACT */
+#define WM8400_DC1_ERRACT_MASK                  0x0800  /* DC1_ERRACT */
+#define WM8400_DC1_ERRACT_SHIFT                     11  /* DC1_ERRACT */
+#define WM8400_DC1_ERRACT_WIDTH                      1  /* DC1_ERRACT */
+#define WM8400_DC1_HIB_MODE                     0x0400  /* DC1_HIB_MODE */
+#define WM8400_DC1_HIB_MODE_MASK                0x0400  /* DC1_HIB_MODE */
+#define WM8400_DC1_HIB_MODE_SHIFT                   10  /* DC1_HIB_MODE */
+#define WM8400_DC1_HIB_MODE_WIDTH                    1  /* DC1_HIB_MODE */
+#define WM8400_DC1_SOFTST_MASK                  0x0300  /* DC1_SOFTST - [9:8] */
+#define WM8400_DC1_SOFTST_SHIFT                      8  /* DC1_SOFTST - [9:8] */
+#define WM8400_DC1_SOFTST_WIDTH                      2  /* DC1_SOFTST - [9:8] */
+#define WM8400_DC1_OV_PROT                      0x0080  /* DC1_OV_PROT */
+#define WM8400_DC1_OV_PROT_MASK                 0x0080  /* DC1_OV_PROT */
+#define WM8400_DC1_OV_PROT_SHIFT                     7  /* DC1_OV_PROT */
+#define WM8400_DC1_OV_PROT_WIDTH                     1  /* DC1_OV_PROT */
+#define WM8400_DC1_VSEL_MASK                    0x007F  /* DC1_VSEL - [6:0] */
+#define WM8400_DC1_VSEL_SHIFT                        0  /* DC1_VSEL - [6:0] */
+#define WM8400_DC1_VSEL_WIDTH                        7  /* DC1_VSEL - [6:0] */
+
+/*
+ * R71 (0x47) - DCDC1 Control 2
+ */
+#define WM8400_DC1_FRC_PWM                      0x2000  /* DC1_FRC_PWM */
+#define WM8400_DC1_FRC_PWM_MASK                 0x2000  /* DC1_FRC_PWM */
+#define WM8400_DC1_FRC_PWM_SHIFT                    13  /* DC1_FRC_PWM */
+#define WM8400_DC1_FRC_PWM_WIDTH                     1  /* DC1_FRC_PWM */
+#define WM8400_DC1_STBY_LIM_MASK                0x0300  /* DC1_STBY_LIM - [9:8] */
+#define WM8400_DC1_STBY_LIM_SHIFT                    8  /* DC1_STBY_LIM - [9:8] */
+#define WM8400_DC1_STBY_LIM_WIDTH                    2  /* DC1_STBY_LIM - [9:8] */
+#define WM8400_DC1_ACT_LIM                      0x0080  /* DC1_ACT_LIM */
+#define WM8400_DC1_ACT_LIM_MASK                 0x0080  /* DC1_ACT_LIM */
+#define WM8400_DC1_ACT_LIM_SHIFT                     7  /* DC1_ACT_LIM */
+#define WM8400_DC1_ACT_LIM_WIDTH                     1  /* DC1_ACT_LIM */
+#define WM8400_DC1_VIMG_MASK                    0x007F  /* DC1_VIMG - [6:0] */
+#define WM8400_DC1_VIMG_SHIFT                        0  /* DC1_VIMG - [6:0] */
+#define WM8400_DC1_VIMG_WIDTH                        7  /* DC1_VIMG - [6:0] */
+
+/*
+ * R72 (0x48) - DCDC2 Control 1
+ */
+#define WM8400_DC2_ENA                          0x8000  /* DC2_ENA */
+#define WM8400_DC2_ENA_MASK                     0x8000  /* DC2_ENA */
+#define WM8400_DC2_ENA_SHIFT                        15  /* DC2_ENA */
+#define WM8400_DC2_ENA_WIDTH                         1  /* DC2_ENA */
+#define WM8400_DC2_ACTIVE                       0x4000  /* DC2_ACTIVE */
+#define WM8400_DC2_ACTIVE_MASK                  0x4000  /* DC2_ACTIVE */
+#define WM8400_DC2_ACTIVE_SHIFT                     14  /* DC2_ACTIVE */
+#define WM8400_DC2_ACTIVE_WIDTH                      1  /* DC2_ACTIVE */
+#define WM8400_DC2_SLEEP                        0x2000  /* DC2_SLEEP */
+#define WM8400_DC2_SLEEP_MASK                   0x2000  /* DC2_SLEEP */
+#define WM8400_DC2_SLEEP_SHIFT                      13  /* DC2_SLEEP */
+#define WM8400_DC2_SLEEP_WIDTH                       1  /* DC2_SLEEP */
+#define WM8400_DC2_OPFLT                        0x1000  /* DC2_OPFLT */
+#define WM8400_DC2_OPFLT_MASK                   0x1000  /* DC2_OPFLT */
+#define WM8400_DC2_OPFLT_SHIFT                      12  /* DC2_OPFLT */
+#define WM8400_DC2_OPFLT_WIDTH                       1  /* DC2_OPFLT */
+#define WM8400_DC2_ERRACT                       0x0800  /* DC2_ERRACT */
+#define WM8400_DC2_ERRACT_MASK                  0x0800  /* DC2_ERRACT */
+#define WM8400_DC2_ERRACT_SHIFT                     11  /* DC2_ERRACT */
+#define WM8400_DC2_ERRACT_WIDTH                      1  /* DC2_ERRACT */
+#define WM8400_DC2_HIB_MODE                     0x0400  /* DC2_HIB_MODE */
+#define WM8400_DC2_HIB_MODE_MASK                0x0400  /* DC2_HIB_MODE */
+#define WM8400_DC2_HIB_MODE_SHIFT                   10  /* DC2_HIB_MODE */
+#define WM8400_DC2_HIB_MODE_WIDTH                    1  /* DC2_HIB_MODE */
+#define WM8400_DC2_SOFTST_MASK                  0x0300  /* DC2_SOFTST - [9:8] */
+#define WM8400_DC2_SOFTST_SHIFT                      8  /* DC2_SOFTST - [9:8] */
+#define WM8400_DC2_SOFTST_WIDTH                      2  /* DC2_SOFTST - [9:8] */
+#define WM8400_DC2_OV_PROT                      0x0080  /* DC2_OV_PROT */
+#define WM8400_DC2_OV_PROT_MASK                 0x0080  /* DC2_OV_PROT */
+#define WM8400_DC2_OV_PROT_SHIFT                     7  /* DC2_OV_PROT */
+#define WM8400_DC2_OV_PROT_WIDTH                     1  /* DC2_OV_PROT */
+#define WM8400_DC2_VSEL_MASK                    0x007F  /* DC2_VSEL - [6:0] */
+#define WM8400_DC2_VSEL_SHIFT                        0  /* DC2_VSEL - [6:0] */
+#define WM8400_DC2_VSEL_WIDTH                        7  /* DC2_VSEL - [6:0] */
+
+/*
+ * R73 (0x49) - DCDC2 Control 2
+ */
+#define WM8400_DC2_FRC_PWM                      0x2000  /* DC2_FRC_PWM */
+#define WM8400_DC2_FRC_PWM_MASK                 0x2000  /* DC2_FRC_PWM */
+#define WM8400_DC2_FRC_PWM_SHIFT                    13  /* DC2_FRC_PWM */
+#define WM8400_DC2_FRC_PWM_WIDTH                     1  /* DC2_FRC_PWM */
+#define WM8400_DC2_STBY_LIM_MASK                0x0300  /* DC2_STBY_LIM - [9:8] */
+#define WM8400_DC2_STBY_LIM_SHIFT                    8  /* DC2_STBY_LIM - [9:8] */
+#define WM8400_DC2_STBY_LIM_WIDTH                    2  /* DC2_STBY_LIM - [9:8] */
+#define WM8400_DC2_ACT_LIM                      0x0080  /* DC2_ACT_LIM */
+#define WM8400_DC2_ACT_LIM_MASK                 0x0080  /* DC2_ACT_LIM */
+#define WM8400_DC2_ACT_LIM_SHIFT                     7  /* DC2_ACT_LIM */
+#define WM8400_DC2_ACT_LIM_WIDTH                     1  /* DC2_ACT_LIM */
+#define WM8400_DC2_VIMG_MASK                    0x007F  /* DC2_VIMG - [6:0] */
+#define WM8400_DC2_VIMG_SHIFT                        0  /* DC2_VIMG - [6:0] */
+#define WM8400_DC2_VIMG_WIDTH                        7  /* DC2_VIMG - [6:0] */
+
+/*
+ * R75 (0x4B) - Interface
+ */
+#define WM8400_AUTOINC                          0x0008  /* AUTOINC */
+#define WM8400_AUTOINC_MASK                     0x0008  /* AUTOINC */
+#define WM8400_AUTOINC_SHIFT                         3  /* AUTOINC */
+#define WM8400_AUTOINC_WIDTH                         1  /* AUTOINC */
+#define WM8400_ARA_ENA                          0x0004  /* ARA_ENA */
+#define WM8400_ARA_ENA_MASK                     0x0004  /* ARA_ENA */
+#define WM8400_ARA_ENA_SHIFT                         2  /* ARA_ENA */
+#define WM8400_ARA_ENA_WIDTH                         1  /* ARA_ENA */
+#define WM8400_SPI_CFG                          0x0002  /* SPI_CFG */
+#define WM8400_SPI_CFG_MASK                     0x0002  /* SPI_CFG */
+#define WM8400_SPI_CFG_SHIFT                         1  /* SPI_CFG */
+#define WM8400_SPI_CFG_WIDTH                         1  /* SPI_CFG */
+
+/*
+ * R76 (0x4C) - PM GENERAL
+ */
+#define WM8400_CODEC_SOFTST                     0x8000  /* CODEC_SOFTST */
+#define WM8400_CODEC_SOFTST_MASK                0x8000  /* CODEC_SOFTST */
+#define WM8400_CODEC_SOFTST_SHIFT                   15  /* CODEC_SOFTST */
+#define WM8400_CODEC_SOFTST_WIDTH                    1  /* CODEC_SOFTST */
+#define WM8400_CODEC_SOFTSD                     0x4000  /* CODEC_SOFTSD */
+#define WM8400_CODEC_SOFTSD_MASK                0x4000  /* CODEC_SOFTSD */
+#define WM8400_CODEC_SOFTSD_SHIFT                   14  /* CODEC_SOFTSD */
+#define WM8400_CODEC_SOFTSD_WIDTH                    1  /* CODEC_SOFTSD */
+#define WM8400_CHIP_SOFTSD                      0x2000  /* CHIP_SOFTSD */
+#define WM8400_CHIP_SOFTSD_MASK                 0x2000  /* CHIP_SOFTSD */
+#define WM8400_CHIP_SOFTSD_SHIFT                    13  /* CHIP_SOFTSD */
+#define WM8400_CHIP_SOFTSD_WIDTH                     1  /* CHIP_SOFTSD */
+#define WM8400_DSLEEP1_POL                      0x0008  /* DSLEEP1_POL */
+#define WM8400_DSLEEP1_POL_MASK                 0x0008  /* DSLEEP1_POL */
+#define WM8400_DSLEEP1_POL_SHIFT                     3  /* DSLEEP1_POL */
+#define WM8400_DSLEEP1_POL_WIDTH                     1  /* DSLEEP1_POL */
+#define WM8400_DSLEEP2_POL                      0x0004  /* DSLEEP2_POL */
+#define WM8400_DSLEEP2_POL_MASK                 0x0004  /* DSLEEP2_POL */
+#define WM8400_DSLEEP2_POL_SHIFT                     2  /* DSLEEP2_POL */
+#define WM8400_DSLEEP2_POL_WIDTH                     1  /* DSLEEP2_POL */
+#define WM8400_PWR_STATE_MASK                   0x0003  /* PWR_STATE - [1:0] */
+#define WM8400_PWR_STATE_SHIFT                       0  /* PWR_STATE - [1:0] */
+#define WM8400_PWR_STATE_WIDTH                       2  /* PWR_STATE - [1:0] */
+
+/*
+ * R78 (0x4E) - PM Shutdown Control
+ */
+#define WM8400_CHIP_GT150_ERRACT                0x0200  /* CHIP_GT150_ERRACT */
+#define WM8400_CHIP_GT150_ERRACT_MASK           0x0200  /* CHIP_GT150_ERRACT */
+#define WM8400_CHIP_GT150_ERRACT_SHIFT               9  /* CHIP_GT150_ERRACT */
+#define WM8400_CHIP_GT150_ERRACT_WIDTH               1  /* CHIP_GT150_ERRACT */
+#define WM8400_CHIP_GT115_ERRACT                0x0100  /* CHIP_GT115_ERRACT */
+#define WM8400_CHIP_GT115_ERRACT_MASK           0x0100  /* CHIP_GT115_ERRACT */
+#define WM8400_CHIP_GT115_ERRACT_SHIFT               8  /* CHIP_GT115_ERRACT */
+#define WM8400_CHIP_GT115_ERRACT_WIDTH               1  /* CHIP_GT115_ERRACT */
+#define WM8400_LINE_CMP_ERRACT                  0x0080  /* LINE_CMP_ERRACT */
+#define WM8400_LINE_CMP_ERRACT_MASK             0x0080  /* LINE_CMP_ERRACT */
+#define WM8400_LINE_CMP_ERRACT_SHIFT                 7  /* LINE_CMP_ERRACT */
+#define WM8400_LINE_CMP_ERRACT_WIDTH                 1  /* LINE_CMP_ERRACT */
+#define WM8400_UVLO_ERRACT                      0x0040  /* UVLO_ERRACT */
+#define WM8400_UVLO_ERRACT_MASK                 0x0040  /* UVLO_ERRACT */
+#define WM8400_UVLO_ERRACT_SHIFT                     6  /* UVLO_ERRACT */
+#define WM8400_UVLO_ERRACT_WIDTH                     1  /* UVLO_ERRACT */
+
+/*
+ * R79 (0x4F) - Interrupt Status 1
+ */
+#define WM8400_MICD_CINT                        0x8000  /* MICD_CINT */
+#define WM8400_MICD_CINT_MASK                   0x8000  /* MICD_CINT */
+#define WM8400_MICD_CINT_SHIFT                      15  /* MICD_CINT */
+#define WM8400_MICD_CINT_WIDTH                       1  /* MICD_CINT */
+#define WM8400_MICSCD_CINT                      0x4000  /* MICSCD_CINT */
+#define WM8400_MICSCD_CINT_MASK                 0x4000  /* MICSCD_CINT */
+#define WM8400_MICSCD_CINT_SHIFT                    14  /* MICSCD_CINT */
+#define WM8400_MICSCD_CINT_WIDTH                     1  /* MICSCD_CINT */
+#define WM8400_JDL_CINT                         0x2000  /* JDL_CINT */
+#define WM8400_JDL_CINT_MASK                    0x2000  /* JDL_CINT */
+#define WM8400_JDL_CINT_SHIFT                       13  /* JDL_CINT */
+#define WM8400_JDL_CINT_WIDTH                        1  /* JDL_CINT */
+#define WM8400_JDR_CINT                         0x1000  /* JDR_CINT */
+#define WM8400_JDR_CINT_MASK                    0x1000  /* JDR_CINT */
+#define WM8400_JDR_CINT_SHIFT                       12  /* JDR_CINT */
+#define WM8400_JDR_CINT_WIDTH                        1  /* JDR_CINT */
+#define WM8400_CODEC_SEQ_END_EINT               0x0800  /* CODEC_SEQ_END_EINT */
+#define WM8400_CODEC_SEQ_END_EINT_MASK          0x0800  /* CODEC_SEQ_END_EINT */
+#define WM8400_CODEC_SEQ_END_EINT_SHIFT             11  /* CODEC_SEQ_END_EINT */
+#define WM8400_CODEC_SEQ_END_EINT_WIDTH              1  /* CODEC_SEQ_END_EINT */
+#define WM8400_CDEL_TO_EINT                     0x0400  /* CDEL_TO_EINT */
+#define WM8400_CDEL_TO_EINT_MASK                0x0400  /* CDEL_TO_EINT */
+#define WM8400_CDEL_TO_EINT_SHIFT                   10  /* CDEL_TO_EINT */
+#define WM8400_CDEL_TO_EINT_WIDTH                    1  /* CDEL_TO_EINT */
+#define WM8400_CHIP_GT150_EINT                  0x0200  /* CHIP_GT150_EINT */
+#define WM8400_CHIP_GT150_EINT_MASK             0x0200  /* CHIP_GT150_EINT */
+#define WM8400_CHIP_GT150_EINT_SHIFT                 9  /* CHIP_GT150_EINT */
+#define WM8400_CHIP_GT150_EINT_WIDTH                 1  /* CHIP_GT150_EINT */
+#define WM8400_CHIP_GT115_EINT                  0x0100  /* CHIP_GT115_EINT */
+#define WM8400_CHIP_GT115_EINT_MASK             0x0100  /* CHIP_GT115_EINT */
+#define WM8400_CHIP_GT115_EINT_SHIFT                 8  /* CHIP_GT115_EINT */
+#define WM8400_CHIP_GT115_EINT_WIDTH                 1  /* CHIP_GT115_EINT */
+#define WM8400_LINE_CMP_EINT                    0x0080  /* LINE_CMP_EINT */
+#define WM8400_LINE_CMP_EINT_MASK               0x0080  /* LINE_CMP_EINT */
+#define WM8400_LINE_CMP_EINT_SHIFT                   7  /* LINE_CMP_EINT */
+#define WM8400_LINE_CMP_EINT_WIDTH                   1  /* LINE_CMP_EINT */
+#define WM8400_UVLO_EINT                        0x0040  /* UVLO_EINT */
+#define WM8400_UVLO_EINT_MASK                   0x0040  /* UVLO_EINT */
+#define WM8400_UVLO_EINT_SHIFT                       6  /* UVLO_EINT */
+#define WM8400_UVLO_EINT_WIDTH                       1  /* UVLO_EINT */
+#define WM8400_DC2_UV_EINT                      0x0020  /* DC2_UV_EINT */
+#define WM8400_DC2_UV_EINT_MASK                 0x0020  /* DC2_UV_EINT */
+#define WM8400_DC2_UV_EINT_SHIFT                     5  /* DC2_UV_EINT */
+#define WM8400_DC2_UV_EINT_WIDTH                     1  /* DC2_UV_EINT */
+#define WM8400_DC1_UV_EINT                      0x0010  /* DC1_UV_EINT */
+#define WM8400_DC1_UV_EINT_MASK                 0x0010  /* DC1_UV_EINT */
+#define WM8400_DC1_UV_EINT_SHIFT                     4  /* DC1_UV_EINT */
+#define WM8400_DC1_UV_EINT_WIDTH                     1  /* DC1_UV_EINT */
+#define WM8400_LDO4_UV_EINT                     0x0008  /* LDO4_UV_EINT */
+#define WM8400_LDO4_UV_EINT_MASK                0x0008  /* LDO4_UV_EINT */
+#define WM8400_LDO4_UV_EINT_SHIFT                    3  /* LDO4_UV_EINT */
+#define WM8400_LDO4_UV_EINT_WIDTH                    1  /* LDO4_UV_EINT */
+#define WM8400_LDO3_UV_EINT                     0x0004  /* LDO3_UV_EINT */
+#define WM8400_LDO3_UV_EINT_MASK                0x0004  /* LDO3_UV_EINT */
+#define WM8400_LDO3_UV_EINT_SHIFT                    2  /* LDO3_UV_EINT */
+#define WM8400_LDO3_UV_EINT_WIDTH                    1  /* LDO3_UV_EINT */
+#define WM8400_LDO2_UV_EINT                     0x0002  /* LDO2_UV_EINT */
+#define WM8400_LDO2_UV_EINT_MASK                0x0002  /* LDO2_UV_EINT */
+#define WM8400_LDO2_UV_EINT_SHIFT                    1  /* LDO2_UV_EINT */
+#define WM8400_LDO2_UV_EINT_WIDTH                    1  /* LDO2_UV_EINT */
+#define WM8400_LDO1_UV_EINT                     0x0001  /* LDO1_UV_EINT */
+#define WM8400_LDO1_UV_EINT_MASK                0x0001  /* LDO1_UV_EINT */
+#define WM8400_LDO1_UV_EINT_SHIFT                    0  /* LDO1_UV_EINT */
+#define WM8400_LDO1_UV_EINT_WIDTH                    1  /* LDO1_UV_EINT */
+
+/*
+ * R80 (0x50) - Interrupt Status 1 Mask
+ */
+#define WM8400_IM_MICD_CINT                     0x8000  /* IM_MICD_CINT */
+#define WM8400_IM_MICD_CINT_MASK                0x8000  /* IM_MICD_CINT */
+#define WM8400_IM_MICD_CINT_SHIFT                   15  /* IM_MICD_CINT */
+#define WM8400_IM_MICD_CINT_WIDTH                    1  /* IM_MICD_CINT */
+#define WM8400_IM_MICSCD_CINT                   0x4000  /* IM_MICSCD_CINT */
+#define WM8400_IM_MICSCD_CINT_MASK              0x4000  /* IM_MICSCD_CINT */
+#define WM8400_IM_MICSCD_CINT_SHIFT                 14  /* IM_MICSCD_CINT */
+#define WM8400_IM_MICSCD_CINT_WIDTH                  1  /* IM_MICSCD_CINT */
+#define WM8400_IM_JDL_CINT                      0x2000  /* IM_JDL_CINT */
+#define WM8400_IM_JDL_CINT_MASK                 0x2000  /* IM_JDL_CINT */
+#define WM8400_IM_JDL_CINT_SHIFT                    13  /* IM_JDL_CINT */
+#define WM8400_IM_JDL_CINT_WIDTH                     1  /* IM_JDL_CINT */
+#define WM8400_IM_JDR_CINT                      0x1000  /* IM_JDR_CINT */
+#define WM8400_IM_JDR_CINT_MASK                 0x1000  /* IM_JDR_CINT */
+#define WM8400_IM_JDR_CINT_SHIFT                    12  /* IM_JDR_CINT */
+#define WM8400_IM_JDR_CINT_WIDTH                     1  /* IM_JDR_CINT */
+#define WM8400_IM_CODEC_SEQ_END_EINT            0x0800  /* IM_CODEC_SEQ_END_EINT */
+#define WM8400_IM_CODEC_SEQ_END_EINT_MASK       0x0800  /* IM_CODEC_SEQ_END_EINT */
+#define WM8400_IM_CODEC_SEQ_END_EINT_SHIFT          11  /* IM_CODEC_SEQ_END_EINT */
+#define WM8400_IM_CODEC_SEQ_END_EINT_WIDTH           1  /* IM_CODEC_SEQ_END_EINT */
+#define WM8400_IM_CDEL_TO_EINT                  0x0400  /* IM_CDEL_TO_EINT */
+#define WM8400_IM_CDEL_TO_EINT_MASK             0x0400  /* IM_CDEL_TO_EINT */
+#define WM8400_IM_CDEL_TO_EINT_SHIFT                10  /* IM_CDEL_TO_EINT */
+#define WM8400_IM_CDEL_TO_EINT_WIDTH                 1  /* IM_CDEL_TO_EINT */
+#define WM8400_IM_CHIP_GT150_EINT               0x0200  /* IM_CHIP_GT150_EINT */
+#define WM8400_IM_CHIP_GT150_EINT_MASK          0x0200  /* IM_CHIP_GT150_EINT */
+#define WM8400_IM_CHIP_GT150_EINT_SHIFT              9  /* IM_CHIP_GT150_EINT */
+#define WM8400_IM_CHIP_GT150_EINT_WIDTH              1  /* IM_CHIP_GT150_EINT */
+#define WM8400_IM_CHIP_GT115_EINT               0x0100  /* IM_CHIP_GT115_EINT */
+#define WM8400_IM_CHIP_GT115_EINT_MASK          0x0100  /* IM_CHIP_GT115_EINT */
+#define WM8400_IM_CHIP_GT115_EINT_SHIFT              8  /* IM_CHIP_GT115_EINT */
+#define WM8400_IM_CHIP_GT115_EINT_WIDTH              1  /* IM_CHIP_GT115_EINT */
+#define WM8400_IM_LINE_CMP_EINT                 0x0080  /* IM_LINE_CMP_EINT */
+#define WM8400_IM_LINE_CMP_EINT_MASK            0x0080  /* IM_LINE_CMP_EINT */
+#define WM8400_IM_LINE_CMP_EINT_SHIFT                7  /* IM_LINE_CMP_EINT */
+#define WM8400_IM_LINE_CMP_EINT_WIDTH                1  /* IM_LINE_CMP_EINT */
+#define WM8400_IM_UVLO_EINT                     0x0040  /* IM_UVLO_EINT */
+#define WM8400_IM_UVLO_EINT_MASK                0x0040  /* IM_UVLO_EINT */
+#define WM8400_IM_UVLO_EINT_SHIFT                    6  /* IM_UVLO_EINT */
+#define WM8400_IM_UVLO_EINT_WIDTH                    1  /* IM_UVLO_EINT */
+#define WM8400_IM_DC2_UV_EINT                   0x0020  /* IM_DC2_UV_EINT */
+#define WM8400_IM_DC2_UV_EINT_MASK              0x0020  /* IM_DC2_UV_EINT */
+#define WM8400_IM_DC2_UV_EINT_SHIFT                  5  /* IM_DC2_UV_EINT */
+#define WM8400_IM_DC2_UV_EINT_WIDTH                  1  /* IM_DC2_UV_EINT */
+#define WM8400_IM_DC1_UV_EINT                   0x0010  /* IM_DC1_UV_EINT */
+#define WM8400_IM_DC1_UV_EINT_MASK              0x0010  /* IM_DC1_UV_EINT */
+#define WM8400_IM_DC1_UV_EINT_SHIFT                  4  /* IM_DC1_UV_EINT */
+#define WM8400_IM_DC1_UV_EINT_WIDTH                  1  /* IM_DC1_UV_EINT */
+#define WM8400_IM_LDO4_UV_EINT                  0x0008  /* IM_LDO4_UV_EINT */
+#define WM8400_IM_LDO4_UV_EINT_MASK             0x0008  /* IM_LDO4_UV_EINT */
+#define WM8400_IM_LDO4_UV_EINT_SHIFT                 3  /* IM_LDO4_UV_EINT */
+#define WM8400_IM_LDO4_UV_EINT_WIDTH                 1  /* IM_LDO4_UV_EINT */
+#define WM8400_IM_LDO3_UV_EINT                  0x0004  /* IM_LDO3_UV_EINT */
+#define WM8400_IM_LDO3_UV_EINT_MASK             0x0004  /* IM_LDO3_UV_EINT */
+#define WM8400_IM_LDO3_UV_EINT_SHIFT                 2  /* IM_LDO3_UV_EINT */
+#define WM8400_IM_LDO3_UV_EINT_WIDTH                 1  /* IM_LDO3_UV_EINT */
+#define WM8400_IM_LDO2_UV_EINT                  0x0002  /* IM_LDO2_UV_EINT */
+#define WM8400_IM_LDO2_UV_EINT_MASK             0x0002  /* IM_LDO2_UV_EINT */
+#define WM8400_IM_LDO2_UV_EINT_SHIFT                 1  /* IM_LDO2_UV_EINT */
+#define WM8400_IM_LDO2_UV_EINT_WIDTH                 1  /* IM_LDO2_UV_EINT */
+#define WM8400_IM_LDO1_UV_EINT                  0x0001  /* IM_LDO1_UV_EINT */
+#define WM8400_IM_LDO1_UV_EINT_MASK             0x0001  /* IM_LDO1_UV_EINT */
+#define WM8400_IM_LDO1_UV_EINT_SHIFT                 0  /* IM_LDO1_UV_EINT */
+#define WM8400_IM_LDO1_UV_EINT_WIDTH                 1  /* IM_LDO1_UV_EINT */
+
+/*
+ * R81 (0x51) - Interrupt Levels
+ */
+#define WM8400_MICD_LVL                         0x8000  /* MICD_LVL */
+#define WM8400_MICD_LVL_MASK                    0x8000  /* MICD_LVL */
+#define WM8400_MICD_LVL_SHIFT                       15  /* MICD_LVL */
+#define WM8400_MICD_LVL_WIDTH                        1  /* MICD_LVL */
+#define WM8400_MICSCD_LVL                       0x4000  /* MICSCD_LVL */
+#define WM8400_MICSCD_LVL_MASK                  0x4000  /* MICSCD_LVL */
+#define WM8400_MICSCD_LVL_SHIFT                     14  /* MICSCD_LVL */
+#define WM8400_MICSCD_LVL_WIDTH                      1  /* MICSCD_LVL */
+#define WM8400_JDL_LVL                          0x2000  /* JDL_LVL */
+#define WM8400_JDL_LVL_MASK                     0x2000  /* JDL_LVL */
+#define WM8400_JDL_LVL_SHIFT                        13  /* JDL_LVL */
+#define WM8400_JDL_LVL_WIDTH                         1  /* JDL_LVL */
+#define WM8400_JDR_LVL                          0x1000  /* JDR_LVL */
+#define WM8400_JDR_LVL_MASK                     0x1000  /* JDR_LVL */
+#define WM8400_JDR_LVL_SHIFT                        12  /* JDR_LVL */
+#define WM8400_JDR_LVL_WIDTH                         1  /* JDR_LVL */
+#define WM8400_CODEC_SEQ_END_LVL                0x0800  /* CODEC_SEQ_END_LVL */
+#define WM8400_CODEC_SEQ_END_LVL_MASK           0x0800  /* CODEC_SEQ_END_LVL */
+#define WM8400_CODEC_SEQ_END_LVL_SHIFT              11  /* CODEC_SEQ_END_LVL */
+#define WM8400_CODEC_SEQ_END_LVL_WIDTH               1  /* CODEC_SEQ_END_LVL */
+#define WM8400_CDEL_TO_LVL                      0x0400  /* CDEL_TO_LVL */
+#define WM8400_CDEL_TO_LVL_MASK                 0x0400  /* CDEL_TO_LVL */
+#define WM8400_CDEL_TO_LVL_SHIFT                    10  /* CDEL_TO_LVL */
+#define WM8400_CDEL_TO_LVL_WIDTH                     1  /* CDEL_TO_LVL */
+#define WM8400_CHIP_GT150_LVL                   0x0200  /* CHIP_GT150_LVL */
+#define WM8400_CHIP_GT150_LVL_MASK              0x0200  /* CHIP_GT150_LVL */
+#define WM8400_CHIP_GT150_LVL_SHIFT                  9  /* CHIP_GT150_LVL */
+#define WM8400_CHIP_GT150_LVL_WIDTH                  1  /* CHIP_GT150_LVL */
+#define WM8400_CHIP_GT115_LVL                   0x0100  /* CHIP_GT115_LVL */
+#define WM8400_CHIP_GT115_LVL_MASK              0x0100  /* CHIP_GT115_LVL */
+#define WM8400_CHIP_GT115_LVL_SHIFT                  8  /* CHIP_GT115_LVL */
+#define WM8400_CHIP_GT115_LVL_WIDTH                  1  /* CHIP_GT115_LVL */
+#define WM8400_LINE_CMP_LVL                     0x0080  /* LINE_CMP_LVL */
+#define WM8400_LINE_CMP_LVL_MASK                0x0080  /* LINE_CMP_LVL */
+#define WM8400_LINE_CMP_LVL_SHIFT                    7  /* LINE_CMP_LVL */
+#define WM8400_LINE_CMP_LVL_WIDTH                    1  /* LINE_CMP_LVL */
+#define WM8400_UVLO_LVL                         0x0040  /* UVLO_LVL */
+#define WM8400_UVLO_LVL_MASK                    0x0040  /* UVLO_LVL */
+#define WM8400_UVLO_LVL_SHIFT                        6  /* UVLO_LVL */
+#define WM8400_UVLO_LVL_WIDTH                        1  /* UVLO_LVL */
+#define WM8400_DC2_UV_LVL                       0x0020  /* DC2_UV_LVL */
+#define WM8400_DC2_UV_LVL_MASK                  0x0020  /* DC2_UV_LVL */
+#define WM8400_DC2_UV_LVL_SHIFT                      5  /* DC2_UV_LVL */
+#define WM8400_DC2_UV_LVL_WIDTH                      1  /* DC2_UV_LVL */
+#define WM8400_DC1_UV_LVL                       0x0010  /* DC1_UV_LVL */
+#define WM8400_DC1_UV_LVL_MASK                  0x0010  /* DC1_UV_LVL */
+#define WM8400_DC1_UV_LVL_SHIFT                      4  /* DC1_UV_LVL */
+#define WM8400_DC1_UV_LVL_WIDTH                      1  /* DC1_UV_LVL */
+#define WM8400_LDO4_UV_LVL                      0x0008  /* LDO4_UV_LVL */
+#define WM8400_LDO4_UV_LVL_MASK                 0x0008  /* LDO4_UV_LVL */
+#define WM8400_LDO4_UV_LVL_SHIFT                     3  /* LDO4_UV_LVL */
+#define WM8400_LDO4_UV_LVL_WIDTH                     1  /* LDO4_UV_LVL */
+#define WM8400_LDO3_UV_LVL                      0x0004  /* LDO3_UV_LVL */
+#define WM8400_LDO3_UV_LVL_MASK                 0x0004  /* LDO3_UV_LVL */
+#define WM8400_LDO3_UV_LVL_SHIFT                     2  /* LDO3_UV_LVL */
+#define WM8400_LDO3_UV_LVL_WIDTH                     1  /* LDO3_UV_LVL */
+#define WM8400_LDO2_UV_LVL                      0x0002  /* LDO2_UV_LVL */
+#define WM8400_LDO2_UV_LVL_MASK                 0x0002  /* LDO2_UV_LVL */
+#define WM8400_LDO2_UV_LVL_SHIFT                     1  /* LDO2_UV_LVL */
+#define WM8400_LDO2_UV_LVL_WIDTH                     1  /* LDO2_UV_LVL */
+#define WM8400_LDO1_UV_LVL                      0x0001  /* LDO1_UV_LVL */
+#define WM8400_LDO1_UV_LVL_MASK                 0x0001  /* LDO1_UV_LVL */
+#define WM8400_LDO1_UV_LVL_SHIFT                     0  /* LDO1_UV_LVL */
+#define WM8400_LDO1_UV_LVL_WIDTH                     1  /* LDO1_UV_LVL */
+
+/*
+ * R82 (0x52) - Shutdown Reason
+ */
+#define WM8400_SDR_CHIP_SOFTSD                  0x2000  /* SDR_CHIP_SOFTSD */
+#define WM8400_SDR_CHIP_SOFTSD_MASK             0x2000  /* SDR_CHIP_SOFTSD */
+#define WM8400_SDR_CHIP_SOFTSD_SHIFT                13  /* SDR_CHIP_SOFTSD */
+#define WM8400_SDR_CHIP_SOFTSD_WIDTH                 1  /* SDR_CHIP_SOFTSD */
+#define WM8400_SDR_NPDN                         0x0800  /* SDR_NPDN */
+#define WM8400_SDR_NPDN_MASK                    0x0800  /* SDR_NPDN */
+#define WM8400_SDR_NPDN_SHIFT                       11  /* SDR_NPDN */
+#define WM8400_SDR_NPDN_WIDTH                        1  /* SDR_NPDN */
+#define WM8400_SDR_CHIP_GT150                   0x0200  /* SDR_CHIP_GT150 */
+#define WM8400_SDR_CHIP_GT150_MASK              0x0200  /* SDR_CHIP_GT150 */
+#define WM8400_SDR_CHIP_GT150_SHIFT                  9  /* SDR_CHIP_GT150 */
+#define WM8400_SDR_CHIP_GT150_WIDTH                  1  /* SDR_CHIP_GT150 */
+#define WM8400_SDR_CHIP_GT115                   0x0100  /* SDR_CHIP_GT115 */
+#define WM8400_SDR_CHIP_GT115_MASK              0x0100  /* SDR_CHIP_GT115 */
+#define WM8400_SDR_CHIP_GT115_SHIFT                  8  /* SDR_CHIP_GT115 */
+#define WM8400_SDR_CHIP_GT115_WIDTH                  1  /* SDR_CHIP_GT115 */
+#define WM8400_SDR_LINE_CMP                     0x0080  /* SDR_LINE_CMP */
+#define WM8400_SDR_LINE_CMP_MASK                0x0080  /* SDR_LINE_CMP */
+#define WM8400_SDR_LINE_CMP_SHIFT                    7  /* SDR_LINE_CMP */
+#define WM8400_SDR_LINE_CMP_WIDTH                    1  /* SDR_LINE_CMP */
+#define WM8400_SDR_UVLO                         0x0040  /* SDR_UVLO */
+#define WM8400_SDR_UVLO_MASK                    0x0040  /* SDR_UVLO */
+#define WM8400_SDR_UVLO_SHIFT                        6  /* SDR_UVLO */
+#define WM8400_SDR_UVLO_WIDTH                        1  /* SDR_UVLO */
+#define WM8400_SDR_DC2_UV                       0x0020  /* SDR_DC2_UV */
+#define WM8400_SDR_DC2_UV_MASK                  0x0020  /* SDR_DC2_UV */
+#define WM8400_SDR_DC2_UV_SHIFT                      5  /* SDR_DC2_UV */
+#define WM8400_SDR_DC2_UV_WIDTH                      1  /* SDR_DC2_UV */
+#define WM8400_SDR_DC1_UV                       0x0010  /* SDR_DC1_UV */
+#define WM8400_SDR_DC1_UV_MASK                  0x0010  /* SDR_DC1_UV */
+#define WM8400_SDR_DC1_UV_SHIFT                      4  /* SDR_DC1_UV */
+#define WM8400_SDR_DC1_UV_WIDTH                      1  /* SDR_DC1_UV */
+#define WM8400_SDR_LDO4_UV                      0x0008  /* SDR_LDO4_UV */
+#define WM8400_SDR_LDO4_UV_MASK                 0x0008  /* SDR_LDO4_UV */
+#define WM8400_SDR_LDO4_UV_SHIFT                     3  /* SDR_LDO4_UV */
+#define WM8400_SDR_LDO4_UV_WIDTH                     1  /* SDR_LDO4_UV */
+#define WM8400_SDR_LDO3_UV                      0x0004  /* SDR_LDO3_UV */
+#define WM8400_SDR_LDO3_UV_MASK                 0x0004  /* SDR_LDO3_UV */
+#define WM8400_SDR_LDO3_UV_SHIFT                     2  /* SDR_LDO3_UV */
+#define WM8400_SDR_LDO3_UV_WIDTH                     1  /* SDR_LDO3_UV */
+#define WM8400_SDR_LDO2_UV                      0x0002  /* SDR_LDO2_UV */
+#define WM8400_SDR_LDO2_UV_MASK                 0x0002  /* SDR_LDO2_UV */
+#define WM8400_SDR_LDO2_UV_SHIFT                     1  /* SDR_LDO2_UV */
+#define WM8400_SDR_LDO2_UV_WIDTH                     1  /* SDR_LDO2_UV */
+#define WM8400_SDR_LDO1_UV                      0x0001  /* SDR_LDO1_UV */
+#define WM8400_SDR_LDO1_UV_MASK                 0x0001  /* SDR_LDO1_UV */
+#define WM8400_SDR_LDO1_UV_SHIFT                     0  /* SDR_LDO1_UV */
+#define WM8400_SDR_LDO1_UV_WIDTH                     1  /* SDR_LDO1_UV */
+
+/*
+ * R84 (0x54) - Line Circuits
+ */
+#define WM8400_BG_LINE_COMP                     0x8000  /* BG_LINE_COMP */
+#define WM8400_BG_LINE_COMP_MASK                0x8000  /* BG_LINE_COMP */
+#define WM8400_BG_LINE_COMP_SHIFT                   15  /* BG_LINE_COMP */
+#define WM8400_BG_LINE_COMP_WIDTH                    1  /* BG_LINE_COMP */
+#define WM8400_LINE_CMP_VTHI_MASK               0x00F0  /* LINE_CMP_VTHI - [7:4] */
+#define WM8400_LINE_CMP_VTHI_SHIFT                   4  /* LINE_CMP_VTHI - [7:4] */
+#define WM8400_LINE_CMP_VTHI_WIDTH                   4  /* LINE_CMP_VTHI - [7:4] */
+#define WM8400_LINE_CMP_VTHD_MASK               0x000F  /* LINE_CMP_VTHD - [3:0] */
+#define WM8400_LINE_CMP_VTHD_SHIFT                   0  /* LINE_CMP_VTHD - [3:0] */
+#define WM8400_LINE_CMP_VTHD_WIDTH                   4  /* LINE_CMP_VTHD - [3:0] */
+
+u16 wm8400_reg_read(struct wm8400 *wm8400, u8 reg);
+int wm8400_block_read(struct wm8400 *wm8400, u8 reg, int count, u16 *data);
+int wm8400_set_bits(struct wm8400 *wm8400, u8 reg, u16 mask, u16 val);
+
+#endif
diff --git a/include/linux/mfd/wm8400.h b/include/linux/mfd/wm8400.h
new file mode 100644
index 00000000..b46b566a
--- /dev/null
+++ b/include/linux/mfd/wm8400.h
@@ -0,0 +1,40 @@
+/*
+ * wm8400 client interface
+ *
+ * Copyright 2008 Wolfson Microelectronics plc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_MFD_WM8400_H
+#define __LINUX_MFD_WM8400_H
+
+#include <linux/regulator/machine.h>
+
+#define WM8400_LDO1  0
+#define WM8400_LDO2  1
+#define WM8400_LDO3  2
+#define WM8400_LDO4  3
+#define WM8400_DCDC1 4
+#define WM8400_DCDC2 5
+
+struct wm8400_platform_data {
+	int (*platform_init)(struct device *dev);
+};
+
+int wm8400_register_regulator(struct device *dev, int reg,
+			      struct regulator_init_data *initdata);
+
+#endif
diff --git a/include/linux/mfd/wm8994/core.h b/include/linux/mfd/wm8994/core.h
new file mode 100644
index 00000000..9eff2a35
--- /dev/null
+++ b/include/linux/mfd/wm8994/core.h
@@ -0,0 +1,113 @@
+/*
+ * include/linux/mfd/wm8994/core.h -- Core interface for WM8994
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM8994_CORE_H__
+#define __MFD_WM8994_CORE_H__
+
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+
+enum wm8994_type {
+	WM8994 = 0,
+	WM8958 = 1,
+	WM1811 = 2,
+};
+
+struct regulator_dev;
+struct regulator_bulk_data;
+struct regmap;
+
+#define WM8994_NUM_GPIO_REGS 11
+#define WM8994_NUM_LDO_REGS   2
+#define WM8994_NUM_IRQ_REGS   2
+
+#define WM8994_IRQ_TEMP_SHUT		0
+#define WM8994_IRQ_MIC1_DET		1
+#define WM8994_IRQ_MIC1_SHRT		2
+#define WM8994_IRQ_MIC2_DET		3
+#define WM8994_IRQ_MIC2_SHRT		4
+#define WM8994_IRQ_FLL1_LOCK		5
+#define WM8994_IRQ_FLL2_LOCK		6
+#define WM8994_IRQ_SRC1_LOCK		7
+#define WM8994_IRQ_SRC2_LOCK		8
+#define WM8994_IRQ_AIF1DRC1_SIG_DET	9
+#define WM8994_IRQ_AIF1DRC2_SIG_DET	10
+#define WM8994_IRQ_AIF2DRC_SIG_DET	11
+#define WM8994_IRQ_FIFOS_ERR		12
+#define WM8994_IRQ_WSEQ_DONE		13
+#define WM8994_IRQ_DCS_DONE		14
+#define WM8994_IRQ_TEMP_WARN		15
+
+/* GPIOs in the chip are numbered from 1-11 */
+#define WM8994_IRQ_GPIO(x) (x + WM8994_IRQ_TEMP_WARN)
+
+struct wm8994 {
+	struct mutex irq_lock;
+
+	enum wm8994_type type;
+	int revision;
+
+	struct device *dev;
+	struct regmap *regmap;
+
+	bool ldo_ena_always_driven;
+
+	int gpio_base;
+	int irq_base;
+
+	int irq;
+	struct regmap_irq_chip_data *irq_data;
+
+	/* Used over suspend/resume */
+	bool suspended;
+
+	struct regulator_dev *dbvdd;
+	int num_supplies;
+	struct regulator_bulk_data *supplies;
+};
+
+/* Device I/O API */
+int wm8994_reg_read(struct wm8994 *wm8994, unsigned short reg);
+int wm8994_reg_write(struct wm8994 *wm8994, unsigned short reg,
+		 unsigned short val);
+int wm8994_set_bits(struct wm8994 *wm8994, unsigned short reg,
+		    unsigned short mask, unsigned short val);
+int wm8994_bulk_read(struct wm8994 *wm8994, unsigned short reg,
+		     int count, u16 *buf);
+int wm8994_bulk_write(struct wm8994 *wm8994, unsigned short reg,
+		     int count, const u16 *buf);
+
+
+/* Helper to save on boilerplate */
+static inline int wm8994_request_irq(struct wm8994 *wm8994, int irq,
+				     irq_handler_t handler, const char *name,
+				     void *data)
+{
+	if (!wm8994->irq_base)
+		return -EINVAL;
+	return request_threaded_irq(wm8994->irq_base + irq, NULL, handler,
+				    IRQF_TRIGGER_RISING, name,
+				    data);
+}
+static inline void wm8994_free_irq(struct wm8994 *wm8994, int irq, void *data)
+{
+	if (!wm8994->irq_base)
+		return;
+	free_irq(wm8994->irq_base + irq, data);
+}
+
+int wm8994_irq_init(struct wm8994 *wm8994);
+void wm8994_irq_exit(struct wm8994 *wm8994);
+
+#endif
diff --git a/include/linux/mfd/wm8994/gpio.h b/include/linux/mfd/wm8994/gpio.h
new file mode 100644
index 00000000..0c79b5ff
--- /dev/null
+++ b/include/linux/mfd/wm8994/gpio.h
@@ -0,0 +1,76 @@
+/*
+ * include/linux/mfd/wm8994/gpio.h - GPIO configuration for WM8994
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM8994_GPIO_H__
+#define __MFD_WM8994_GPIO_H__
+
+#define WM8994_GPIO_MAX 11
+
+#define WM8994_GP_FN_PIN_SPECIFIC    0
+#define WM8994_GP_FN_GPIO            1
+#define WM8994_GP_FN_SDOUT           2
+#define WM8994_GP_FN_IRQ             3
+#define WM8994_GP_FN_TEMPERATURE     4
+#define WM8994_GP_FN_MICBIAS1_DET    5
+#define WM8994_GP_FN_MICBIAS1_SHORT  6
+#define WM8994_GP_FN_MICBIAS2_DET    7
+#define WM8994_GP_FN_MICBIAS2_SHORT  8
+#define WM8994_GP_FN_FLL1_LOCK       9
+#define WM8994_GP_FN_FLL2_LOCK      10
+#define WM8994_GP_FN_SRC1_LOCK      11
+#define WM8994_GP_FN_SRC2_LOCK      12
+#define WM8994_GP_FN_DRC1_ACT       13
+#define WM8994_GP_FN_DRC2_ACT       14
+#define WM8994_GP_FN_DRC3_ACT       15
+#define WM8994_GP_FN_WSEQ_STATUS    16
+#define WM8994_GP_FN_FIFO_ERROR     17
+#define WM8994_GP_FN_OPCLK          18
+#define WM8994_GP_FN_THW	    19
+#define WM8994_GP_FN_DCS_DONE	    20
+#define WM8994_GP_FN_FLL1_OUT       21
+#define WM8994_GP_FN_FLL2_OUT       22
+
+#define WM8994_GPN_DIR                          0x8000  /* GPN_DIR */
+#define WM8994_GPN_DIR_MASK                     0x8000  /* GPN_DIR */
+#define WM8994_GPN_DIR_SHIFT                        15  /* GPN_DIR */
+#define WM8994_GPN_DIR_WIDTH                         1  /* GPN_DIR */
+#define WM8994_GPN_PU                           0x4000  /* GPN_PU */
+#define WM8994_GPN_PU_MASK                      0x4000  /* GPN_PU */
+#define WM8994_GPN_PU_SHIFT                         14  /* GPN_PU */
+#define WM8994_GPN_PU_WIDTH                          1  /* GPN_PU */
+#define WM8994_GPN_PD                           0x2000  /* GPN_PD */
+#define WM8994_GPN_PD_MASK                      0x2000  /* GPN_PD */
+#define WM8994_GPN_PD_SHIFT                         13  /* GPN_PD */
+#define WM8994_GPN_PD_WIDTH                          1  /* GPN_PD */
+#define WM8994_GPN_POL                          0x0400  /* GPN_POL */
+#define WM8994_GPN_POL_MASK                     0x0400  /* GPN_POL */
+#define WM8994_GPN_POL_SHIFT                        10  /* GPN_POL */
+#define WM8994_GPN_POL_WIDTH                         1  /* GPN_POL */
+#define WM8994_GPN_OP_CFG                       0x0200  /* GPN_OP_CFG */
+#define WM8994_GPN_OP_CFG_MASK                  0x0200  /* GPN_OP_CFG */
+#define WM8994_GPN_OP_CFG_SHIFT                      9  /* GPN_OP_CFG */
+#define WM8994_GPN_OP_CFG_WIDTH                      1  /* GPN_OP_CFG */
+#define WM8994_GPN_DB                           0x0100  /* GPN_DB */
+#define WM8994_GPN_DB_MASK                      0x0100  /* GPN_DB */
+#define WM8994_GPN_DB_SHIFT                          8  /* GPN_DB */
+#define WM8994_GPN_DB_WIDTH                          1  /* GPN_DB */
+#define WM8994_GPN_LVL                          0x0040  /* GPN_LVL */
+#define WM8994_GPN_LVL_MASK                     0x0040  /* GPN_LVL */
+#define WM8994_GPN_LVL_SHIFT                         6  /* GPN_LVL */
+#define WM8994_GPN_LVL_WIDTH                         1  /* GPN_LVL */
+#define WM8994_GPN_FN_MASK                      0x001F  /* GPN_FN - [4:0] */
+#define WM8994_GPN_FN_SHIFT                          0  /* GPN_FN - [4:0] */
+#define WM8994_GPN_FN_WIDTH                          5  /* GPN_FN - [4:0] */
+
+#endif
diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h
new file mode 100644
index 00000000..893267bb
--- /dev/null
+++ b/include/linux/mfd/wm8994/pdata.h
@@ -0,0 +1,210 @@
+/*
+ * include/linux/mfd/wm8994/pdata.h -- Platform data for WM8994
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM8994_PDATA_H__
+#define __MFD_WM8994_PDATA_H__
+
+#define WM8994_NUM_LDO   2
+#define WM8994_NUM_GPIO 11
+
+struct wm8994_ldo_pdata {
+	/** GPIOs to enable regulator, 0 or less if not available */
+	int enable;
+
+	const struct regulator_init_data *init_data;
+};
+
+#define WM8994_CONFIGURE_GPIO 0x10000
+
+#define WM8994_DRC_REGS 5
+#define WM8994_EQ_REGS  20
+#define WM8958_MBC_CUTOFF_REGS 20
+#define WM8958_MBC_COEFF_REGS  48
+#define WM8958_MBC_COMBINED_REGS 56
+#define WM8958_VSS_HPF_REGS 2
+#define WM8958_VSS_REGS 148
+#define WM8958_ENH_EQ_REGS 32
+
+/**
+ * DRC configurations are specified with a label and a set of register
+ * values to write (the enable bits will be ignored).  At runtime an
+ * enumerated control will be presented for each DRC block allowing
+ * the user to choose the configration to use.
+ *
+ * Configurations may be generated by hand or by using the DRC control
+ * panel provided by the WISCE - see  http://www.wolfsonmicro.com/wisce/
+ * for details.
+ */
+struct wm8994_drc_cfg {
+        const char *name;
+        u16 regs[WM8994_DRC_REGS];
+};
+
+/**
+ * ReTune Mobile configurations are specified with a label, sample
+ * rate and set of values to write (the enable bits will be ignored).
+ *
+ * Configurations are expected to be generated using the ReTune Mobile
+ * control panel in WISCE - see http://www.wolfsonmicro.com/wisce/
+ */
+struct wm8994_retune_mobile_cfg {
+        const char *name;
+        unsigned int rate;
+        u16 regs[WM8994_EQ_REGS];
+};
+
+/**
+ * Multiband compressor configurations are specified with a label and
+ * two sets of values to write.  Configurations are expected to be
+ * generated using the multiband compressor configuration panel in
+ * WISCE - see http://www.wolfsonmicro.com/wisce/
+ */
+struct wm8958_mbc_cfg {
+	const char *name;
+	u16 cutoff_regs[WM8958_MBC_CUTOFF_REGS];
+	u16 coeff_regs[WM8958_MBC_COEFF_REGS];
+
+	/* Coefficient layout when using MBC+VSS firmware */
+	u16 combined_regs[WM8958_MBC_COMBINED_REGS];
+};
+
+/**
+ * VSS HPF configurations are specified with a label and two values to
+ * write.  Configurations are expected to be generated using the
+ * multiband compressor configuration panel in WISCE - see
+ * http://www.wolfsonmicro.com/wisce/
+ */
+struct wm8958_vss_hpf_cfg {
+	const char *name;
+	u16 regs[WM8958_VSS_HPF_REGS];
+};
+
+/**
+ * VSS configurations are specified with a label and array of values
+ * to write.  Configurations are expected to be generated using the
+ * multiband compressor configuration panel in WISCE - see
+ * http://www.wolfsonmicro.com/wisce/
+ */
+struct wm8958_vss_cfg {
+	const char *name;
+	u16 regs[WM8958_VSS_REGS];
+};
+
+/**
+ * Enhanced EQ configurations are specified with a label and array of
+ * values to write.  Configurations are expected to be generated using
+ * the multiband compressor configuration panel in WISCE - see
+ * http://www.wolfsonmicro.com/wisce/
+ */
+struct wm8958_enh_eq_cfg {
+	const char *name;
+	u16 regs[WM8958_ENH_EQ_REGS];
+};
+
+/**
+ * Microphone detection rates, used to tune response rates and power
+ * consumption for WM8958/WM1811 microphone detection.
+ *
+ * @sysclk: System clock rate to use this configuration for.
+ * @idle: True if this configuration should use when no accessory is detected,
+ *        false otherwise.
+ * @start: Value for MICD_BIAS_START_TIME register field (not shifted).
+ * @rate: Value for MICD_RATE register field (not shifted).
+ */
+struct wm8958_micd_rate {
+	int sysclk;
+	bool idle;
+	int start;
+	int rate;
+};
+
+struct wm8994_pdata {
+	int gpio_base;
+
+	/**
+	 * Default values for GPIOs if non-zero, WM8994_CONFIGURE_GPIO
+	 * can be used for all zero values.
+	 */
+	int gpio_defaults[WM8994_NUM_GPIO];
+
+	struct wm8994_ldo_pdata ldo[WM8994_NUM_LDO];
+
+	int irq_base;  /** Base IRQ number for WM8994, required for IRQs */
+
+        int num_drc_cfgs;
+        struct wm8994_drc_cfg *drc_cfgs;
+
+        int num_retune_mobile_cfgs;
+        struct wm8994_retune_mobile_cfg *retune_mobile_cfgs;
+
+	int num_mbc_cfgs;
+	struct wm8958_mbc_cfg *mbc_cfgs;
+
+	int num_vss_cfgs;
+	struct wm8958_vss_cfg *vss_cfgs;
+
+	int num_vss_hpf_cfgs;
+	struct wm8958_vss_hpf_cfg *vss_hpf_cfgs;
+
+	int num_enh_eq_cfgs;
+	struct wm8958_enh_eq_cfg *enh_eq_cfgs;
+
+	int num_micd_rates;
+	struct wm8958_micd_rate *micd_rates;
+
+        /* LINEOUT can be differential or single ended */
+        unsigned int lineout1_diff:1;
+        unsigned int lineout2_diff:1;
+
+        /* Common mode feedback */
+        unsigned int lineout1fb:1;
+        unsigned int lineout2fb:1;
+
+	/* IRQ for microphone detection if brought out directly as a
+	 * signal.
+	 */
+	int micdet_irq;
+
+        /* WM8994 microphone biases: 0=0.9*AVDD1 1=0.65*AVVD1 */
+        unsigned int micbias1_lvl:1;
+        unsigned int micbias2_lvl:1;
+
+        /* WM8994 jack detect threashold levels, see datasheet for values */
+        unsigned int jd_scthr:2;
+        unsigned int jd_thr:2;
+
+	/* Configure WM1811 jack detection for use with external capacitor */
+	unsigned int jd_ext_cap:1;
+
+	/* WM8958 microphone bias configuration */
+	int micbias[2];
+
+	/* WM8958 microphone detection ranges */
+	u16 micd_lvl_sel;
+
+	/* Disable the internal pull downs on the LDOs if they are
+	 * always driven (eg, connected to an always on supply or
+	 * GPIO that always drives an output.  If they float power
+	 * consumption will rise.
+	 */
+	bool ldo_ena_always_driven;
+
+	/*
+	 * SPKMODE must be pulled internally by the device on this
+	 * system.
+	 */
+	bool spkmode_pu;
+};
+
+#endif
diff --git a/include/linux/mfd/wm8994/registers.h b/include/linux/mfd/wm8994/registers.h
new file mode 100644
index 00000000..86e6a032
--- /dev/null
+++ b/include/linux/mfd/wm8994/registers.h
@@ -0,0 +1,4811 @@
+/*
+ * include/linux/mfd/wm8994/registers.h -- Register definitions for WM8994
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM8994_REGISTERS_H__
+#define __MFD_WM8994_REGISTERS_H__
+
+/*
+ * Register values.
+ */
+#define WM8994_SOFTWARE_RESET                   0x00
+#define WM8994_POWER_MANAGEMENT_1               0x01
+#define WM8994_POWER_MANAGEMENT_2               0x02
+#define WM8994_POWER_MANAGEMENT_3               0x03
+#define WM8994_POWER_MANAGEMENT_4               0x04
+#define WM8994_POWER_MANAGEMENT_5               0x05
+#define WM8994_POWER_MANAGEMENT_6               0x06
+#define WM8994_INPUT_MIXER_1                    0x15
+#define WM8994_LEFT_LINE_INPUT_1_2_VOLUME       0x18
+#define WM8994_LEFT_LINE_INPUT_3_4_VOLUME       0x19
+#define WM8994_RIGHT_LINE_INPUT_1_2_VOLUME      0x1A
+#define WM8994_RIGHT_LINE_INPUT_3_4_VOLUME      0x1B
+#define WM8994_LEFT_OUTPUT_VOLUME               0x1C
+#define WM8994_RIGHT_OUTPUT_VOLUME              0x1D
+#define WM8994_LINE_OUTPUTS_VOLUME              0x1E
+#define WM8994_HPOUT2_VOLUME                    0x1F
+#define WM8994_LEFT_OPGA_VOLUME                 0x20
+#define WM8994_RIGHT_OPGA_VOLUME                0x21
+#define WM8994_SPKMIXL_ATTENUATION              0x22
+#define WM8994_SPKMIXR_ATTENUATION              0x23
+#define WM8994_SPKOUT_MIXERS                    0x24
+#define WM8994_CLASSD                           0x25
+#define WM8994_SPEAKER_VOLUME_LEFT              0x26
+#define WM8994_SPEAKER_VOLUME_RIGHT             0x27
+#define WM8994_INPUT_MIXER_2                    0x28
+#define WM8994_INPUT_MIXER_3                    0x29
+#define WM8994_INPUT_MIXER_4                    0x2A
+#define WM8994_INPUT_MIXER_5                    0x2B
+#define WM8994_INPUT_MIXER_6                    0x2C
+#define WM8994_OUTPUT_MIXER_1                   0x2D
+#define WM8994_OUTPUT_MIXER_2                   0x2E
+#define WM8994_OUTPUT_MIXER_3                   0x2F
+#define WM8994_OUTPUT_MIXER_4                   0x30
+#define WM8994_OUTPUT_MIXER_5                   0x31
+#define WM8994_OUTPUT_MIXER_6                   0x32
+#define WM8994_HPOUT2_MIXER                     0x33
+#define WM8994_LINE_MIXER_1                     0x34
+#define WM8994_LINE_MIXER_2                     0x35
+#define WM8994_SPEAKER_MIXER                    0x36
+#define WM8994_ADDITIONAL_CONTROL               0x37
+#define WM8994_ANTIPOP_1                        0x38
+#define WM8994_ANTIPOP_2                        0x39
+#define WM8994_MICBIAS                          0x3A
+#define WM8994_LDO_1                            0x3B
+#define WM8994_LDO_2                            0x3C
+#define WM8958_MICBIAS1				0x3D
+#define WM8958_MICBIAS2				0x3E
+#define WM8994_CHARGE_PUMP_1                    0x4C
+#define WM8958_CHARGE_PUMP_2                    0x4D
+#define WM8994_CLASS_W_1                        0x51
+#define WM8994_DC_SERVO_1                       0x54
+#define WM8994_DC_SERVO_2                       0x55
+#define WM8994_DC_SERVO_4                       0x57
+#define WM8994_DC_SERVO_READBACK                0x58
+#define WM8994_DC_SERVO_4E			0x59
+#define WM8994_ANALOGUE_HP_1                    0x60
+#define WM8958_MIC_DETECT_1                     0xD0
+#define WM8958_MIC_DETECT_2                     0xD1
+#define WM8958_MIC_DETECT_3                     0xD2
+#define WM8994_CHIP_REVISION                    0x100
+#define WM8994_CONTROL_INTERFACE                0x101
+#define WM8994_WRITE_SEQUENCER_CTRL_1           0x110
+#define WM8994_WRITE_SEQUENCER_CTRL_2           0x111
+#define WM8994_AIF1_CLOCKING_1                  0x200
+#define WM8994_AIF1_CLOCKING_2                  0x201
+#define WM8994_AIF2_CLOCKING_1                  0x204
+#define WM8994_AIF2_CLOCKING_2                  0x205
+#define WM8994_CLOCKING_1                       0x208
+#define WM8994_CLOCKING_2                       0x209
+#define WM8994_AIF1_RATE                        0x210
+#define WM8994_AIF2_RATE                        0x211
+#define WM8994_RATE_STATUS                      0x212
+#define WM8994_FLL1_CONTROL_1                   0x220
+#define WM8994_FLL1_CONTROL_2                   0x221
+#define WM8994_FLL1_CONTROL_3                   0x222
+#define WM8994_FLL1_CONTROL_4                   0x223
+#define WM8994_FLL1_CONTROL_5                   0x224
+#define WM8958_FLL1_EFS_1                       0x226
+#define WM8958_FLL1_EFS_2                       0x227
+#define WM8994_FLL2_CONTROL_1                   0x240
+#define WM8994_FLL2_CONTROL_2                   0x241
+#define WM8994_FLL2_CONTROL_3                   0x242
+#define WM8994_FLL2_CONTROL_4                   0x243
+#define WM8994_FLL2_CONTROL_5                   0x244
+#define WM8958_FLL2_EFS_1                       0x246
+#define WM8958_FLL2_EFS_2                       0x247
+#define WM8994_AIF1_CONTROL_1                   0x300
+#define WM8994_AIF1_CONTROL_2                   0x301
+#define WM8994_AIF1_MASTER_SLAVE                0x302
+#define WM8994_AIF1_BCLK                        0x303
+#define WM8994_AIF1ADC_LRCLK                    0x304
+#define WM8994_AIF1DAC_LRCLK                    0x305
+#define WM8994_AIF1DAC_DATA                     0x306
+#define WM8994_AIF1ADC_DATA                     0x307
+#define WM8994_AIF2_CONTROL_1                   0x310
+#define WM8994_AIF2_CONTROL_2                   0x311
+#define WM8994_AIF2_MASTER_SLAVE                0x312
+#define WM8994_AIF2_BCLK                        0x313
+#define WM8994_AIF2ADC_LRCLK                    0x314
+#define WM8994_AIF2DAC_LRCLK                    0x315
+#define WM8994_AIF2DAC_DATA                     0x316
+#define WM8994_AIF2ADC_DATA                     0x317
+#define WM1811_AIF2TX_CONTROL                   0x318
+#define WM8958_AIF3_CONTROL_1                   0x320
+#define WM8958_AIF3_CONTROL_2                   0x321
+#define WM8958_AIF3DAC_DATA                     0x322
+#define WM8958_AIF3ADC_DATA                     0x323
+#define WM8994_AIF1_ADC1_LEFT_VOLUME            0x400
+#define WM8994_AIF1_ADC1_RIGHT_VOLUME           0x401
+#define WM8994_AIF1_DAC1_LEFT_VOLUME            0x402
+#define WM8994_AIF1_DAC1_RIGHT_VOLUME           0x403
+#define WM8994_AIF1_ADC2_LEFT_VOLUME            0x404
+#define WM8994_AIF1_ADC2_RIGHT_VOLUME           0x405
+#define WM8994_AIF1_DAC2_LEFT_VOLUME            0x406
+#define WM8994_AIF1_DAC2_RIGHT_VOLUME           0x407
+#define WM8994_AIF1_ADC1_FILTERS                0x410
+#define WM8994_AIF1_ADC2_FILTERS                0x411
+#define WM8994_AIF1_DAC1_FILTERS_1              0x420
+#define WM8994_AIF1_DAC1_FILTERS_2              0x421
+#define WM8994_AIF1_DAC2_FILTERS_1              0x422
+#define WM8994_AIF1_DAC2_FILTERS_2              0x423
+#define WM8958_AIF1_DAC1_NOISE_GATE             0x430
+#define WM8958_AIF1_DAC2_NOISE_GATE             0x431
+#define WM8994_AIF1_DRC1_1                      0x440
+#define WM8994_AIF1_DRC1_2                      0x441
+#define WM8994_AIF1_DRC1_3                      0x442
+#define WM8994_AIF1_DRC1_4                      0x443
+#define WM8994_AIF1_DRC1_5                      0x444
+#define WM8994_AIF1_DRC2_1                      0x450
+#define WM8994_AIF1_DRC2_2                      0x451
+#define WM8994_AIF1_DRC2_3                      0x452
+#define WM8994_AIF1_DRC2_4                      0x453
+#define WM8994_AIF1_DRC2_5                      0x454
+#define WM8994_AIF1_DAC1_EQ_GAINS_1             0x480
+#define WM8994_AIF1_DAC1_EQ_GAINS_2             0x481
+#define WM8994_AIF1_DAC1_EQ_BAND_1_A            0x482
+#define WM8994_AIF1_DAC1_EQ_BAND_1_B            0x483
+#define WM8994_AIF1_DAC1_EQ_BAND_1_PG           0x484
+#define WM8994_AIF1_DAC1_EQ_BAND_2_A            0x485
+#define WM8994_AIF1_DAC1_EQ_BAND_2_B            0x486
+#define WM8994_AIF1_DAC1_EQ_BAND_2_C            0x487
+#define WM8994_AIF1_DAC1_EQ_BAND_2_PG           0x488
+#define WM8994_AIF1_DAC1_EQ_BAND_3_A            0x489
+#define WM8994_AIF1_DAC1_EQ_BAND_3_B            0x48A
+#define WM8994_AIF1_DAC1_EQ_BAND_3_C            0x48B
+#define WM8994_AIF1_DAC1_EQ_BAND_3_PG           0x48C
+#define WM8994_AIF1_DAC1_EQ_BAND_4_A            0x48D
+#define WM8994_AIF1_DAC1_EQ_BAND_4_B            0x48E
+#define WM8994_AIF1_DAC1_EQ_BAND_4_C            0x48F
+#define WM8994_AIF1_DAC1_EQ_BAND_4_PG           0x490
+#define WM8994_AIF1_DAC1_EQ_BAND_5_A            0x491
+#define WM8994_AIF1_DAC1_EQ_BAND_5_B            0x492
+#define WM8994_AIF1_DAC1_EQ_BAND_5_PG           0x493
+#define WM8994_AIF1_DAC1_EQ_BAND_1_C            0x494
+#define WM8994_AIF1_DAC2_EQ_GAINS_1             0x4A0
+#define WM8994_AIF1_DAC2_EQ_GAINS_2             0x4A1
+#define WM8994_AIF1_DAC2_EQ_BAND_1_A            0x4A2
+#define WM8994_AIF1_DAC2_EQ_BAND_1_B            0x4A3
+#define WM8994_AIF1_DAC2_EQ_BAND_1_PG           0x4A4
+#define WM8994_AIF1_DAC2_EQ_BAND_2_A            0x4A5
+#define WM8994_AIF1_DAC2_EQ_BAND_2_B            0x4A6
+#define WM8994_AIF1_DAC2_EQ_BAND_2_C            0x4A7
+#define WM8994_AIF1_DAC2_EQ_BAND_2_PG           0x4A8
+#define WM8994_AIF1_DAC2_EQ_BAND_3_A            0x4A9
+#define WM8994_AIF1_DAC2_EQ_BAND_3_B            0x4AA
+#define WM8994_AIF1_DAC2_EQ_BAND_3_C            0x4AB
+#define WM8994_AIF1_DAC2_EQ_BAND_3_PG           0x4AC
+#define WM8994_AIF1_DAC2_EQ_BAND_4_A            0x4AD
+#define WM8994_AIF1_DAC2_EQ_BAND_4_B            0x4AE
+#define WM8994_AIF1_DAC2_EQ_BAND_4_C            0x4AF
+#define WM8994_AIF1_DAC2_EQ_BAND_4_PG           0x4B0
+#define WM8994_AIF1_DAC2_EQ_BAND_5_A            0x4B1
+#define WM8994_AIF1_DAC2_EQ_BAND_5_B            0x4B2
+#define WM8994_AIF1_DAC2_EQ_BAND_5_PG           0x4B3
+#define WM8994_AIF1_DAC2_EQ_BAND_1_C            0x4B4
+#define WM8994_AIF2_ADC_LEFT_VOLUME             0x500
+#define WM8994_AIF2_ADC_RIGHT_VOLUME            0x501
+#define WM8994_AIF2_DAC_LEFT_VOLUME             0x502
+#define WM8994_AIF2_DAC_RIGHT_VOLUME            0x503
+#define WM8994_AIF2_ADC_FILTERS                 0x510
+#define WM8994_AIF2_DAC_FILTERS_1               0x520
+#define WM8994_AIF2_DAC_FILTERS_2               0x521
+#define WM8958_AIF2_DAC_NOISE_GATE              0x530
+#define WM8994_AIF2_DRC_1                       0x540
+#define WM8994_AIF2_DRC_2                       0x541
+#define WM8994_AIF2_DRC_3                       0x542
+#define WM8994_AIF2_DRC_4                       0x543
+#define WM8994_AIF2_DRC_5                       0x544
+#define WM8994_AIF2_EQ_GAINS_1                  0x580
+#define WM8994_AIF2_EQ_GAINS_2                  0x581
+#define WM8994_AIF2_EQ_BAND_1_A                 0x582
+#define WM8994_AIF2_EQ_BAND_1_B                 0x583
+#define WM8994_AIF2_EQ_BAND_1_PG                0x584
+#define WM8994_AIF2_EQ_BAND_2_A                 0x585
+#define WM8994_AIF2_EQ_BAND_2_B                 0x586
+#define WM8994_AIF2_EQ_BAND_2_C                 0x587
+#define WM8994_AIF2_EQ_BAND_2_PG                0x588
+#define WM8994_AIF2_EQ_BAND_3_A                 0x589
+#define WM8994_AIF2_EQ_BAND_3_B                 0x58A
+#define WM8994_AIF2_EQ_BAND_3_C                 0x58B
+#define WM8994_AIF2_EQ_BAND_3_PG                0x58C
+#define WM8994_AIF2_EQ_BAND_4_A                 0x58D
+#define WM8994_AIF2_EQ_BAND_4_B                 0x58E
+#define WM8994_AIF2_EQ_BAND_4_C                 0x58F
+#define WM8994_AIF2_EQ_BAND_4_PG                0x590
+#define WM8994_AIF2_EQ_BAND_5_A                 0x591
+#define WM8994_AIF2_EQ_BAND_5_B                 0x592
+#define WM8994_AIF2_EQ_BAND_5_PG                0x593
+#define WM8994_AIF2_EQ_BAND_1_C                 0x594
+#define WM8994_DAC1_MIXER_VOLUMES               0x600
+#define WM8994_DAC1_LEFT_MIXER_ROUTING          0x601
+#define WM8994_DAC1_RIGHT_MIXER_ROUTING         0x602
+#define WM8994_DAC2_MIXER_VOLUMES               0x603
+#define WM8994_DAC2_LEFT_MIXER_ROUTING          0x604
+#define WM8994_DAC2_RIGHT_MIXER_ROUTING         0x605
+#define WM8994_AIF1_ADC1_LEFT_MIXER_ROUTING     0x606
+#define WM8994_AIF1_ADC1_RIGHT_MIXER_ROUTING    0x607
+#define WM8994_AIF1_ADC2_LEFT_MIXER_ROUTING     0x608
+#define WM8994_AIF1_ADC2_RIGHT_MIXER_ROUTING    0x609
+#define WM8994_DAC1_LEFT_VOLUME                 0x610
+#define WM8994_DAC1_RIGHT_VOLUME                0x611
+#define WM8994_DAC2_LEFT_VOLUME                 0x612
+#define WM8994_DAC2_RIGHT_VOLUME                0x613
+#define WM8994_DAC_SOFTMUTE                     0x614
+#define WM8994_OVERSAMPLING                     0x620
+#define WM8994_SIDETONE                         0x621
+#define WM8994_GPIO_1                           0x700
+#define WM8994_GPIO_2                           0x701
+#define WM8994_GPIO_3                           0x702
+#define WM8994_GPIO_4                           0x703
+#define WM8994_GPIO_5                           0x704
+#define WM8994_GPIO_6                           0x705
+#define WM1811_JACKDET_CTRL			0x705
+#define WM8994_GPIO_7                           0x706
+#define WM8994_GPIO_8                           0x707
+#define WM8994_GPIO_9                           0x708
+#define WM8994_GPIO_10                          0x709
+#define WM8994_GPIO_11                          0x70A
+#define WM8994_PULL_CONTROL_1                   0x720
+#define WM8994_PULL_CONTROL_2                   0x721
+#define WM8994_INTERRUPT_STATUS_1               0x730
+#define WM8994_INTERRUPT_STATUS_2               0x731
+#define WM8994_INTERRUPT_RAW_STATUS_2           0x732
+#define WM8994_INTERRUPT_STATUS_1_MASK          0x738
+#define WM8994_INTERRUPT_STATUS_2_MASK          0x739
+#define WM8994_INTERRUPT_CONTROL                0x740
+#define WM8994_IRQ_DEBOUNCE                     0x748
+#define WM8958_DSP2_PROGRAM                     0x900
+#define WM8958_DSP2_CONFIG                      0x901
+#define WM8958_DSP2_MAGICNUM                    0xA00
+#define WM8958_DSP2_RELEASEYEAR                 0xA01
+#define WM8958_DSP2_RELEASEMONTHDAY             0xA02
+#define WM8958_DSP2_RELEASETIME                 0xA03
+#define WM8958_DSP2_VERMAJMIN                   0xA04
+#define WM8958_DSP2_VERBUILD                    0xA05
+#define WM8958_DSP2_TESTREG                     0xA06
+#define WM8958_DSP2_XORREG                      0xA07
+#define WM8958_DSP2_SHIFTMAXX                   0xA08
+#define WM8958_DSP2_SHIFTMAXY                   0xA09
+#define WM8958_DSP2_SHIFTMAXZ                   0xA0A
+#define WM8958_DSP2_SHIFTMAXEXTLO               0xA0B
+#define WM8958_DSP2_AESSELECT                   0xA0C
+#define WM8958_DSP2_EXECCONTROL                 0xA0D
+#define WM8958_DSP2_SAMPLEBREAK                 0xA0E
+#define WM8958_DSP2_COUNTBREAK                  0xA0F
+#define WM8958_DSP2_INTSTATUS                   0xA10
+#define WM8958_DSP2_EVENTSTATUS                 0xA11
+#define WM8958_DSP2_INTMASK                     0xA12
+#define WM8958_DSP2_CONFIGDWIDTH                0xA13
+#define WM8958_DSP2_CONFIGINSTR                 0xA14
+#define WM8958_DSP2_CONFIGDMEM                  0xA15
+#define WM8958_DSP2_CONFIGDELAYS                0xA16
+#define WM8958_DSP2_CONFIGNUMIO                 0xA17
+#define WM8958_DSP2_CONFIGEXTDEPTH              0xA18
+#define WM8958_DSP2_CONFIGMULTIPLIER            0xA19
+#define WM8958_DSP2_CONFIGCTRLDWIDTH            0xA1A
+#define WM8958_DSP2_CONFIGPIPELINE              0xA1B
+#define WM8958_DSP2_SHIFTMAXEXTHI               0xA1C
+#define WM8958_DSP2_SWVERSIONREG                0xA1D
+#define WM8958_DSP2_CONFIGXMEM                  0xA1E
+#define WM8958_DSP2_CONFIGYMEM                  0xA1F
+#define WM8958_DSP2_CONFIGZMEM                  0xA20
+#define WM8958_FW_BUILD_1                       0x2000
+#define WM8958_FW_BUILD_0                       0x2001
+#define WM8958_FW_ID_1                          0x2002
+#define WM8958_FW_ID_0                          0x2003
+#define WM8958_FW_MAJOR_1                       0x2004
+#define WM8958_FW_MAJOR_0                       0x2005
+#define WM8958_FW_MINOR_1                       0x2006
+#define WM8958_FW_MINOR_0                       0x2007
+#define WM8958_FW_PATCH_1                       0x2008
+#define WM8958_FW_PATCH_0                       0x2009
+#define WM8958_MBC_BAND_2_LOWER_CUTOFF_C1_1     0x2200
+#define WM8958_MBC_BAND_2_LOWER_CUTOFF_C1_2     0x2201
+#define WM8958_MBC_BAND_2_LOWER_CUTOFF_C2_1     0x2202
+#define WM8958_MBC_BAND_2_LOWER_CUTOFF_C2_2     0x2203
+#define WM8958_MBC_BAND_2_LOWER_CUTOFF_C3_1     0x2204
+#define WM8958_MBC_BAND_2_LOWER_CUTOFF_C3_2     0x2205
+#define WM8958_MBC_BAND_2_UPPER_CUTOFF_C2_1     0x2206
+#define WM8958_MBC_BAND_2_UPPER_CUTOFF_C2_2     0x2207
+#define WM8958_MBC_BAND_2_UPPER_CUTOFF_C3_1     0x2208
+#define WM8958_MBC_BAND_2_UPPER_CUTOFF_C3_2     0x2209
+#define WM8958_MBC_BAND_2_UPPER_CUTOFF_C1_1     0x220A
+#define WM8958_MBC_BAND_2_UPPER_CUTOFF_C1_2     0x220B
+#define WM8958_MBC_BAND_1_UPPER_CUTOFF_C1_1     0x220C
+#define WM8958_MBC_BAND_1_UPPER_CUTOFF_C1_2     0x220D
+#define WM8958_MBC_BAND_1_UPPER_CUTOFF_C2_1     0x220E
+#define WM8958_MBC_BAND_1_UPPER_CUTOFF_C2_2     0x220F
+#define WM8958_MBC_BAND_1_UPPER_CUTOFF_C3_1     0x2210
+#define WM8958_MBC_BAND_1_UPPER_CUTOFF_C3_2     0x2211
+#define WM8958_MBC_BAND_1_LOWER_CUTOFF_1        0x2212
+#define WM8958_MBC_BAND_1_LOWER_CUTOFF_2        0x2213
+#define WM8958_MBC_BAND_1_K_1                   0x2400
+#define WM8958_MBC_BAND_1_K_2                   0x2401
+#define WM8958_MBC_BAND_1_N1_1                  0x2402
+#define WM8958_MBC_BAND_1_N1_2                  0x2403
+#define WM8958_MBC_BAND_1_N2_1                  0x2404
+#define WM8958_MBC_BAND_1_N2_2                  0x2405
+#define WM8958_MBC_BAND_1_N3_1                  0x2406
+#define WM8958_MBC_BAND_1_N3_2                  0x2407
+#define WM8958_MBC_BAND_1_N4_1                  0x2408
+#define WM8958_MBC_BAND_1_N4_2                  0x2409
+#define WM8958_MBC_BAND_1_N5_1                  0x240A
+#define WM8958_MBC_BAND_1_N5_2                  0x240B
+#define WM8958_MBC_BAND_1_X1_1                  0x240C
+#define WM8958_MBC_BAND_1_X1_2                  0x240D
+#define WM8958_MBC_BAND_1_X2_1                  0x240E
+#define WM8958_MBC_BAND_1_X2_2                  0x240F
+#define WM8958_MBC_BAND_1_X3_1                  0x2410
+#define WM8958_MBC_BAND_1_X3_2                  0x2411
+#define WM8958_MBC_BAND_1_ATTACK_1              0x2412
+#define WM8958_MBC_BAND_1_ATTACK_2              0x2413
+#define WM8958_MBC_BAND_1_DECAY_1               0x2414
+#define WM8958_MBC_BAND_1_DECAY_2               0x2415
+#define WM8958_MBC_BAND_2_K_1                   0x2416
+#define WM8958_MBC_BAND_2_K_2                   0x2417
+#define WM8958_MBC_BAND_2_N1_1                  0x2418
+#define WM8958_MBC_BAND_2_N1_2                  0x2419
+#define WM8958_MBC_BAND_2_N2_1                  0x241A
+#define WM8958_MBC_BAND_2_N2_2                  0x241B
+#define WM8958_MBC_BAND_2_N3_1                  0x241C
+#define WM8958_MBC_BAND_2_N3_2                  0x241D
+#define WM8958_MBC_BAND_2_N4_1                  0x241E
+#define WM8958_MBC_BAND_2_N4_2                  0x241F
+#define WM8958_MBC_BAND_2_N5_1                  0x2420
+#define WM8958_MBC_BAND_2_N5_2                  0x2421
+#define WM8958_MBC_BAND_2_X1_1                  0x2422
+#define WM8958_MBC_BAND_2_X1_2                  0x2423
+#define WM8958_MBC_BAND_2_X2_1                  0x2424
+#define WM8958_MBC_BAND_2_X2_2                  0x2425
+#define WM8958_MBC_BAND_2_X3_1                  0x2426
+#define WM8958_MBC_BAND_2_X3_2                  0x2427
+#define WM8958_MBC_BAND_2_ATTACK_1              0x2428
+#define WM8958_MBC_BAND_2_ATTACK_2              0x2429
+#define WM8958_MBC_BAND_2_DECAY_1               0x242A
+#define WM8958_MBC_BAND_2_DECAY_2               0x242B
+#define WM8958_MBC_B2_PG2_1                     0x242C
+#define WM8958_MBC_B2_PG2_2                     0x242D
+#define WM8958_MBC_B1_PG2_1                     0x242E
+#define WM8958_MBC_B1_PG2_2                     0x242F
+#define WM8958_MBC_CROSSOVER_1                  0x2600
+#define WM8958_MBC_CROSSOVER_2                  0x2601
+#define WM8958_MBC_HPF_1                        0x2602
+#define WM8958_MBC_HPF_2                        0x2603
+#define WM8958_MBC_LPF_1                        0x2606
+#define WM8958_MBC_LPF_2                        0x2607
+#define WM8958_MBC_RMS_LIMIT_1                  0x260A
+#define WM8958_MBC_RMS_LIMIT_2                  0x260B
+#define WM8994_WRITE_SEQUENCER_0                0x3000
+#define WM8994_WRITE_SEQUENCER_1                0x3001
+#define WM8994_WRITE_SEQUENCER_2                0x3002
+#define WM8994_WRITE_SEQUENCER_3                0x3003
+#define WM8994_WRITE_SEQUENCER_4                0x3004
+#define WM8994_WRITE_SEQUENCER_5                0x3005
+#define WM8994_WRITE_SEQUENCER_6                0x3006
+#define WM8994_WRITE_SEQUENCER_7                0x3007
+#define WM8994_WRITE_SEQUENCER_8                0x3008
+#define WM8994_WRITE_SEQUENCER_9                0x3009
+#define WM8994_WRITE_SEQUENCER_10               0x300A
+#define WM8994_WRITE_SEQUENCER_11               0x300B
+#define WM8994_WRITE_SEQUENCER_12               0x300C
+#define WM8994_WRITE_SEQUENCER_13               0x300D
+#define WM8994_WRITE_SEQUENCER_14               0x300E
+#define WM8994_WRITE_SEQUENCER_15               0x300F
+#define WM8994_WRITE_SEQUENCER_16               0x3010
+#define WM8994_WRITE_SEQUENCER_17               0x3011
+#define WM8994_WRITE_SEQUENCER_18               0x3012
+#define WM8994_WRITE_SEQUENCER_19               0x3013
+#define WM8994_WRITE_SEQUENCER_20               0x3014
+#define WM8994_WRITE_SEQUENCER_21               0x3015
+#define WM8994_WRITE_SEQUENCER_22               0x3016
+#define WM8994_WRITE_SEQUENCER_23               0x3017
+#define WM8994_WRITE_SEQUENCER_24               0x3018
+#define WM8994_WRITE_SEQUENCER_25               0x3019
+#define WM8994_WRITE_SEQUENCER_26               0x301A
+#define WM8994_WRITE_SEQUENCER_27               0x301B
+#define WM8994_WRITE_SEQUENCER_28               0x301C
+#define WM8994_WRITE_SEQUENCER_29               0x301D
+#define WM8994_WRITE_SEQUENCER_30               0x301E
+#define WM8994_WRITE_SEQUENCER_31               0x301F
+#define WM8994_WRITE_SEQUENCER_32               0x3020
+#define WM8994_WRITE_SEQUENCER_33               0x3021
+#define WM8994_WRITE_SEQUENCER_34               0x3022
+#define WM8994_WRITE_SEQUENCER_35               0x3023
+#define WM8994_WRITE_SEQUENCER_36               0x3024
+#define WM8994_WRITE_SEQUENCER_37               0x3025
+#define WM8994_WRITE_SEQUENCER_38               0x3026
+#define WM8994_WRITE_SEQUENCER_39               0x3027
+#define WM8994_WRITE_SEQUENCER_40               0x3028
+#define WM8994_WRITE_SEQUENCER_41               0x3029
+#define WM8994_WRITE_SEQUENCER_42               0x302A
+#define WM8994_WRITE_SEQUENCER_43               0x302B
+#define WM8994_WRITE_SEQUENCER_44               0x302C
+#define WM8994_WRITE_SEQUENCER_45               0x302D
+#define WM8994_WRITE_SEQUENCER_46               0x302E
+#define WM8994_WRITE_SEQUENCER_47               0x302F
+#define WM8994_WRITE_SEQUENCER_48               0x3030
+#define WM8994_WRITE_SEQUENCER_49               0x3031
+#define WM8994_WRITE_SEQUENCER_50               0x3032
+#define WM8994_WRITE_SEQUENCER_51               0x3033
+#define WM8994_WRITE_SEQUENCER_52               0x3034
+#define WM8994_WRITE_SEQUENCER_53               0x3035
+#define WM8994_WRITE_SEQUENCER_54               0x3036
+#define WM8994_WRITE_SEQUENCER_55               0x3037
+#define WM8994_WRITE_SEQUENCER_56               0x3038
+#define WM8994_WRITE_SEQUENCER_57               0x3039
+#define WM8994_WRITE_SEQUENCER_58               0x303A
+#define WM8994_WRITE_SEQUENCER_59               0x303B
+#define WM8994_WRITE_SEQUENCER_60               0x303C
+#define WM8994_WRITE_SEQUENCER_61               0x303D
+#define WM8994_WRITE_SEQUENCER_62               0x303E
+#define WM8994_WRITE_SEQUENCER_63               0x303F
+#define WM8994_WRITE_SEQUENCER_64               0x3040
+#define WM8994_WRITE_SEQUENCER_65               0x3041
+#define WM8994_WRITE_SEQUENCER_66               0x3042
+#define WM8994_WRITE_SEQUENCER_67               0x3043
+#define WM8994_WRITE_SEQUENCER_68               0x3044
+#define WM8994_WRITE_SEQUENCER_69               0x3045
+#define WM8994_WRITE_SEQUENCER_70               0x3046
+#define WM8994_WRITE_SEQUENCER_71               0x3047
+#define WM8994_WRITE_SEQUENCER_72               0x3048
+#define WM8994_WRITE_SEQUENCER_73               0x3049
+#define WM8994_WRITE_SEQUENCER_74               0x304A
+#define WM8994_WRITE_SEQUENCER_75               0x304B
+#define WM8994_WRITE_SEQUENCER_76               0x304C
+#define WM8994_WRITE_SEQUENCER_77               0x304D
+#define WM8994_WRITE_SEQUENCER_78               0x304E
+#define WM8994_WRITE_SEQUENCER_79               0x304F
+#define WM8994_WRITE_SEQUENCER_80               0x3050
+#define WM8994_WRITE_SEQUENCER_81               0x3051
+#define WM8994_WRITE_SEQUENCER_82               0x3052
+#define WM8994_WRITE_SEQUENCER_83               0x3053
+#define WM8994_WRITE_SEQUENCER_84               0x3054
+#define WM8994_WRITE_SEQUENCER_85               0x3055
+#define WM8994_WRITE_SEQUENCER_86               0x3056
+#define WM8994_WRITE_SEQUENCER_87               0x3057
+#define WM8994_WRITE_SEQUENCER_88               0x3058
+#define WM8994_WRITE_SEQUENCER_89               0x3059
+#define WM8994_WRITE_SEQUENCER_90               0x305A
+#define WM8994_WRITE_SEQUENCER_91               0x305B
+#define WM8994_WRITE_SEQUENCER_92               0x305C
+#define WM8994_WRITE_SEQUENCER_93               0x305D
+#define WM8994_WRITE_SEQUENCER_94               0x305E
+#define WM8994_WRITE_SEQUENCER_95               0x305F
+#define WM8994_WRITE_SEQUENCER_96               0x3060
+#define WM8994_WRITE_SEQUENCER_97               0x3061
+#define WM8994_WRITE_SEQUENCER_98               0x3062
+#define WM8994_WRITE_SEQUENCER_99               0x3063
+#define WM8994_WRITE_SEQUENCER_100              0x3064
+#define WM8994_WRITE_SEQUENCER_101              0x3065
+#define WM8994_WRITE_SEQUENCER_102              0x3066
+#define WM8994_WRITE_SEQUENCER_103              0x3067
+#define WM8994_WRITE_SEQUENCER_104              0x3068
+#define WM8994_WRITE_SEQUENCER_105              0x3069
+#define WM8994_WRITE_SEQUENCER_106              0x306A
+#define WM8994_WRITE_SEQUENCER_107              0x306B
+#define WM8994_WRITE_SEQUENCER_108              0x306C
+#define WM8994_WRITE_SEQUENCER_109              0x306D
+#define WM8994_WRITE_SEQUENCER_110              0x306E
+#define WM8994_WRITE_SEQUENCER_111              0x306F
+#define WM8994_WRITE_SEQUENCER_112              0x3070
+#define WM8994_WRITE_SEQUENCER_113              0x3071
+#define WM8994_WRITE_SEQUENCER_114              0x3072
+#define WM8994_WRITE_SEQUENCER_115              0x3073
+#define WM8994_WRITE_SEQUENCER_116              0x3074
+#define WM8994_WRITE_SEQUENCER_117              0x3075
+#define WM8994_WRITE_SEQUENCER_118              0x3076
+#define WM8994_WRITE_SEQUENCER_119              0x3077
+#define WM8994_WRITE_SEQUENCER_120              0x3078
+#define WM8994_WRITE_SEQUENCER_121              0x3079
+#define WM8994_WRITE_SEQUENCER_122              0x307A
+#define WM8994_WRITE_SEQUENCER_123              0x307B
+#define WM8994_WRITE_SEQUENCER_124              0x307C
+#define WM8994_WRITE_SEQUENCER_125              0x307D
+#define WM8994_WRITE_SEQUENCER_126              0x307E
+#define WM8994_WRITE_SEQUENCER_127              0x307F
+#define WM8994_WRITE_SEQUENCER_128              0x3080
+#define WM8994_WRITE_SEQUENCER_129              0x3081
+#define WM8994_WRITE_SEQUENCER_130              0x3082
+#define WM8994_WRITE_SEQUENCER_131              0x3083
+#define WM8994_WRITE_SEQUENCER_132              0x3084
+#define WM8994_WRITE_SEQUENCER_133              0x3085
+#define WM8994_WRITE_SEQUENCER_134              0x3086
+#define WM8994_WRITE_SEQUENCER_135              0x3087
+#define WM8994_WRITE_SEQUENCER_136              0x3088
+#define WM8994_WRITE_SEQUENCER_137              0x3089
+#define WM8994_WRITE_SEQUENCER_138              0x308A
+#define WM8994_WRITE_SEQUENCER_139              0x308B
+#define WM8994_WRITE_SEQUENCER_140              0x308C
+#define WM8994_WRITE_SEQUENCER_141              0x308D
+#define WM8994_WRITE_SEQUENCER_142              0x308E
+#define WM8994_WRITE_SEQUENCER_143              0x308F
+#define WM8994_WRITE_SEQUENCER_144              0x3090
+#define WM8994_WRITE_SEQUENCER_145              0x3091
+#define WM8994_WRITE_SEQUENCER_146              0x3092
+#define WM8994_WRITE_SEQUENCER_147              0x3093
+#define WM8994_WRITE_SEQUENCER_148              0x3094
+#define WM8994_WRITE_SEQUENCER_149              0x3095
+#define WM8994_WRITE_SEQUENCER_150              0x3096
+#define WM8994_WRITE_SEQUENCER_151              0x3097
+#define WM8994_WRITE_SEQUENCER_152              0x3098
+#define WM8994_WRITE_SEQUENCER_153              0x3099
+#define WM8994_WRITE_SEQUENCER_154              0x309A
+#define WM8994_WRITE_SEQUENCER_155              0x309B
+#define WM8994_WRITE_SEQUENCER_156              0x309C
+#define WM8994_WRITE_SEQUENCER_157              0x309D
+#define WM8994_WRITE_SEQUENCER_158              0x309E
+#define WM8994_WRITE_SEQUENCER_159              0x309F
+#define WM8994_WRITE_SEQUENCER_160              0x30A0
+#define WM8994_WRITE_SEQUENCER_161              0x30A1
+#define WM8994_WRITE_SEQUENCER_162              0x30A2
+#define WM8994_WRITE_SEQUENCER_163              0x30A3
+#define WM8994_WRITE_SEQUENCER_164              0x30A4
+#define WM8994_WRITE_SEQUENCER_165              0x30A5
+#define WM8994_WRITE_SEQUENCER_166              0x30A6
+#define WM8994_WRITE_SEQUENCER_167              0x30A7
+#define WM8994_WRITE_SEQUENCER_168              0x30A8
+#define WM8994_WRITE_SEQUENCER_169              0x30A9
+#define WM8994_WRITE_SEQUENCER_170              0x30AA
+#define WM8994_WRITE_SEQUENCER_171              0x30AB
+#define WM8994_WRITE_SEQUENCER_172              0x30AC
+#define WM8994_WRITE_SEQUENCER_173              0x30AD
+#define WM8994_WRITE_SEQUENCER_174              0x30AE
+#define WM8994_WRITE_SEQUENCER_175              0x30AF
+#define WM8994_WRITE_SEQUENCER_176              0x30B0
+#define WM8994_WRITE_SEQUENCER_177              0x30B1
+#define WM8994_WRITE_SEQUENCER_178              0x30B2
+#define WM8994_WRITE_SEQUENCER_179              0x30B3
+#define WM8994_WRITE_SEQUENCER_180              0x30B4
+#define WM8994_WRITE_SEQUENCER_181              0x30B5
+#define WM8994_WRITE_SEQUENCER_182              0x30B6
+#define WM8994_WRITE_SEQUENCER_183              0x30B7
+#define WM8994_WRITE_SEQUENCER_184              0x30B8
+#define WM8994_WRITE_SEQUENCER_185              0x30B9
+#define WM8994_WRITE_SEQUENCER_186              0x30BA
+#define WM8994_WRITE_SEQUENCER_187              0x30BB
+#define WM8994_WRITE_SEQUENCER_188              0x30BC
+#define WM8994_WRITE_SEQUENCER_189              0x30BD
+#define WM8994_WRITE_SEQUENCER_190              0x30BE
+#define WM8994_WRITE_SEQUENCER_191              0x30BF
+#define WM8994_WRITE_SEQUENCER_192              0x30C0
+#define WM8994_WRITE_SEQUENCER_193              0x30C1
+#define WM8994_WRITE_SEQUENCER_194              0x30C2
+#define WM8994_WRITE_SEQUENCER_195              0x30C3
+#define WM8994_WRITE_SEQUENCER_196              0x30C4
+#define WM8994_WRITE_SEQUENCER_197              0x30C5
+#define WM8994_WRITE_SEQUENCER_198              0x30C6
+#define WM8994_WRITE_SEQUENCER_199              0x30C7
+#define WM8994_WRITE_SEQUENCER_200              0x30C8
+#define WM8994_WRITE_SEQUENCER_201              0x30C9
+#define WM8994_WRITE_SEQUENCER_202              0x30CA
+#define WM8994_WRITE_SEQUENCER_203              0x30CB
+#define WM8994_WRITE_SEQUENCER_204              0x30CC
+#define WM8994_WRITE_SEQUENCER_205              0x30CD
+#define WM8994_WRITE_SEQUENCER_206              0x30CE
+#define WM8994_WRITE_SEQUENCER_207              0x30CF
+#define WM8994_WRITE_SEQUENCER_208              0x30D0
+#define WM8994_WRITE_SEQUENCER_209              0x30D1
+#define WM8994_WRITE_SEQUENCER_210              0x30D2
+#define WM8994_WRITE_SEQUENCER_211              0x30D3
+#define WM8994_WRITE_SEQUENCER_212              0x30D4
+#define WM8994_WRITE_SEQUENCER_213              0x30D5
+#define WM8994_WRITE_SEQUENCER_214              0x30D6
+#define WM8994_WRITE_SEQUENCER_215              0x30D7
+#define WM8994_WRITE_SEQUENCER_216              0x30D8
+#define WM8994_WRITE_SEQUENCER_217              0x30D9
+#define WM8994_WRITE_SEQUENCER_218              0x30DA
+#define WM8994_WRITE_SEQUENCER_219              0x30DB
+#define WM8994_WRITE_SEQUENCER_220              0x30DC
+#define WM8994_WRITE_SEQUENCER_221              0x30DD
+#define WM8994_WRITE_SEQUENCER_222              0x30DE
+#define WM8994_WRITE_SEQUENCER_223              0x30DF
+#define WM8994_WRITE_SEQUENCER_224              0x30E0
+#define WM8994_WRITE_SEQUENCER_225              0x30E1
+#define WM8994_WRITE_SEQUENCER_226              0x30E2
+#define WM8994_WRITE_SEQUENCER_227              0x30E3
+#define WM8994_WRITE_SEQUENCER_228              0x30E4
+#define WM8994_WRITE_SEQUENCER_229              0x30E5
+#define WM8994_WRITE_SEQUENCER_230              0x30E6
+#define WM8994_WRITE_SEQUENCER_231              0x30E7
+#define WM8994_WRITE_SEQUENCER_232              0x30E8
+#define WM8994_WRITE_SEQUENCER_233              0x30E9
+#define WM8994_WRITE_SEQUENCER_234              0x30EA
+#define WM8994_WRITE_SEQUENCER_235              0x30EB
+#define WM8994_WRITE_SEQUENCER_236              0x30EC
+#define WM8994_WRITE_SEQUENCER_237              0x30ED
+#define WM8994_WRITE_SEQUENCER_238              0x30EE
+#define WM8994_WRITE_SEQUENCER_239              0x30EF
+#define WM8994_WRITE_SEQUENCER_240              0x30F0
+#define WM8994_WRITE_SEQUENCER_241              0x30F1
+#define WM8994_WRITE_SEQUENCER_242              0x30F2
+#define WM8994_WRITE_SEQUENCER_243              0x30F3
+#define WM8994_WRITE_SEQUENCER_244              0x30F4
+#define WM8994_WRITE_SEQUENCER_245              0x30F5
+#define WM8994_WRITE_SEQUENCER_246              0x30F6
+#define WM8994_WRITE_SEQUENCER_247              0x30F7
+#define WM8994_WRITE_SEQUENCER_248              0x30F8
+#define WM8994_WRITE_SEQUENCER_249              0x30F9
+#define WM8994_WRITE_SEQUENCER_250              0x30FA
+#define WM8994_WRITE_SEQUENCER_251              0x30FB
+#define WM8994_WRITE_SEQUENCER_252              0x30FC
+#define WM8994_WRITE_SEQUENCER_253              0x30FD
+#define WM8994_WRITE_SEQUENCER_254              0x30FE
+#define WM8994_WRITE_SEQUENCER_255              0x30FF
+#define WM8994_WRITE_SEQUENCER_256              0x3100
+#define WM8994_WRITE_SEQUENCER_257              0x3101
+#define WM8994_WRITE_SEQUENCER_258              0x3102
+#define WM8994_WRITE_SEQUENCER_259              0x3103
+#define WM8994_WRITE_SEQUENCER_260              0x3104
+#define WM8994_WRITE_SEQUENCER_261              0x3105
+#define WM8994_WRITE_SEQUENCER_262              0x3106
+#define WM8994_WRITE_SEQUENCER_263              0x3107
+#define WM8994_WRITE_SEQUENCER_264              0x3108
+#define WM8994_WRITE_SEQUENCER_265              0x3109
+#define WM8994_WRITE_SEQUENCER_266              0x310A
+#define WM8994_WRITE_SEQUENCER_267              0x310B
+#define WM8994_WRITE_SEQUENCER_268              0x310C
+#define WM8994_WRITE_SEQUENCER_269              0x310D
+#define WM8994_WRITE_SEQUENCER_270              0x310E
+#define WM8994_WRITE_SEQUENCER_271              0x310F
+#define WM8994_WRITE_SEQUENCER_272              0x3110
+#define WM8994_WRITE_SEQUENCER_273              0x3111
+#define WM8994_WRITE_SEQUENCER_274              0x3112
+#define WM8994_WRITE_SEQUENCER_275              0x3113
+#define WM8994_WRITE_SEQUENCER_276              0x3114
+#define WM8994_WRITE_SEQUENCER_277              0x3115
+#define WM8994_WRITE_SEQUENCER_278              0x3116
+#define WM8994_WRITE_SEQUENCER_279              0x3117
+#define WM8994_WRITE_SEQUENCER_280              0x3118
+#define WM8994_WRITE_SEQUENCER_281              0x3119
+#define WM8994_WRITE_SEQUENCER_282              0x311A
+#define WM8994_WRITE_SEQUENCER_283              0x311B
+#define WM8994_WRITE_SEQUENCER_284              0x311C
+#define WM8994_WRITE_SEQUENCER_285              0x311D
+#define WM8994_WRITE_SEQUENCER_286              0x311E
+#define WM8994_WRITE_SEQUENCER_287              0x311F
+#define WM8994_WRITE_SEQUENCER_288              0x3120
+#define WM8994_WRITE_SEQUENCER_289              0x3121
+#define WM8994_WRITE_SEQUENCER_290              0x3122
+#define WM8994_WRITE_SEQUENCER_291              0x3123
+#define WM8994_WRITE_SEQUENCER_292              0x3124
+#define WM8994_WRITE_SEQUENCER_293              0x3125
+#define WM8994_WRITE_SEQUENCER_294              0x3126
+#define WM8994_WRITE_SEQUENCER_295              0x3127
+#define WM8994_WRITE_SEQUENCER_296              0x3128
+#define WM8994_WRITE_SEQUENCER_297              0x3129
+#define WM8994_WRITE_SEQUENCER_298              0x312A
+#define WM8994_WRITE_SEQUENCER_299              0x312B
+#define WM8994_WRITE_SEQUENCER_300              0x312C
+#define WM8994_WRITE_SEQUENCER_301              0x312D
+#define WM8994_WRITE_SEQUENCER_302              0x312E
+#define WM8994_WRITE_SEQUENCER_303              0x312F
+#define WM8994_WRITE_SEQUENCER_304              0x3130
+#define WM8994_WRITE_SEQUENCER_305              0x3131
+#define WM8994_WRITE_SEQUENCER_306              0x3132
+#define WM8994_WRITE_SEQUENCER_307              0x3133
+#define WM8994_WRITE_SEQUENCER_308              0x3134
+#define WM8994_WRITE_SEQUENCER_309              0x3135
+#define WM8994_WRITE_SEQUENCER_310              0x3136
+#define WM8994_WRITE_SEQUENCER_311              0x3137
+#define WM8994_WRITE_SEQUENCER_312              0x3138
+#define WM8994_WRITE_SEQUENCER_313              0x3139
+#define WM8994_WRITE_SEQUENCER_314              0x313A
+#define WM8994_WRITE_SEQUENCER_315              0x313B
+#define WM8994_WRITE_SEQUENCER_316              0x313C
+#define WM8994_WRITE_SEQUENCER_317              0x313D
+#define WM8994_WRITE_SEQUENCER_318              0x313E
+#define WM8994_WRITE_SEQUENCER_319              0x313F
+#define WM8994_WRITE_SEQUENCER_320              0x3140
+#define WM8994_WRITE_SEQUENCER_321              0x3141
+#define WM8994_WRITE_SEQUENCER_322              0x3142
+#define WM8994_WRITE_SEQUENCER_323              0x3143
+#define WM8994_WRITE_SEQUENCER_324              0x3144
+#define WM8994_WRITE_SEQUENCER_325              0x3145
+#define WM8994_WRITE_SEQUENCER_326              0x3146
+#define WM8994_WRITE_SEQUENCER_327              0x3147
+#define WM8994_WRITE_SEQUENCER_328              0x3148
+#define WM8994_WRITE_SEQUENCER_329              0x3149
+#define WM8994_WRITE_SEQUENCER_330              0x314A
+#define WM8994_WRITE_SEQUENCER_331              0x314B
+#define WM8994_WRITE_SEQUENCER_332              0x314C
+#define WM8994_WRITE_SEQUENCER_333              0x314D
+#define WM8994_WRITE_SEQUENCER_334              0x314E
+#define WM8994_WRITE_SEQUENCER_335              0x314F
+#define WM8994_WRITE_SEQUENCER_336              0x3150
+#define WM8994_WRITE_SEQUENCER_337              0x3151
+#define WM8994_WRITE_SEQUENCER_338              0x3152
+#define WM8994_WRITE_SEQUENCER_339              0x3153
+#define WM8994_WRITE_SEQUENCER_340              0x3154
+#define WM8994_WRITE_SEQUENCER_341              0x3155
+#define WM8994_WRITE_SEQUENCER_342              0x3156
+#define WM8994_WRITE_SEQUENCER_343              0x3157
+#define WM8994_WRITE_SEQUENCER_344              0x3158
+#define WM8994_WRITE_SEQUENCER_345              0x3159
+#define WM8994_WRITE_SEQUENCER_346              0x315A
+#define WM8994_WRITE_SEQUENCER_347              0x315B
+#define WM8994_WRITE_SEQUENCER_348              0x315C
+#define WM8994_WRITE_SEQUENCER_349              0x315D
+#define WM8994_WRITE_SEQUENCER_350              0x315E
+#define WM8994_WRITE_SEQUENCER_351              0x315F
+#define WM8994_WRITE_SEQUENCER_352              0x3160
+#define WM8994_WRITE_SEQUENCER_353              0x3161
+#define WM8994_WRITE_SEQUENCER_354              0x3162
+#define WM8994_WRITE_SEQUENCER_355              0x3163
+#define WM8994_WRITE_SEQUENCER_356              0x3164
+#define WM8994_WRITE_SEQUENCER_357              0x3165
+#define WM8994_WRITE_SEQUENCER_358              0x3166
+#define WM8994_WRITE_SEQUENCER_359              0x3167
+#define WM8994_WRITE_SEQUENCER_360              0x3168
+#define WM8994_WRITE_SEQUENCER_361              0x3169
+#define WM8994_WRITE_SEQUENCER_362              0x316A
+#define WM8994_WRITE_SEQUENCER_363              0x316B
+#define WM8994_WRITE_SEQUENCER_364              0x316C
+#define WM8994_WRITE_SEQUENCER_365              0x316D
+#define WM8994_WRITE_SEQUENCER_366              0x316E
+#define WM8994_WRITE_SEQUENCER_367              0x316F
+#define WM8994_WRITE_SEQUENCER_368              0x3170
+#define WM8994_WRITE_SEQUENCER_369              0x3171
+#define WM8994_WRITE_SEQUENCER_370              0x3172
+#define WM8994_WRITE_SEQUENCER_371              0x3173
+#define WM8994_WRITE_SEQUENCER_372              0x3174
+#define WM8994_WRITE_SEQUENCER_373              0x3175
+#define WM8994_WRITE_SEQUENCER_374              0x3176
+#define WM8994_WRITE_SEQUENCER_375              0x3177
+#define WM8994_WRITE_SEQUENCER_376              0x3178
+#define WM8994_WRITE_SEQUENCER_377              0x3179
+#define WM8994_WRITE_SEQUENCER_378              0x317A
+#define WM8994_WRITE_SEQUENCER_379              0x317B
+#define WM8994_WRITE_SEQUENCER_380              0x317C
+#define WM8994_WRITE_SEQUENCER_381              0x317D
+#define WM8994_WRITE_SEQUENCER_382              0x317E
+#define WM8994_WRITE_SEQUENCER_383              0x317F
+#define WM8994_WRITE_SEQUENCER_384              0x3180
+#define WM8994_WRITE_SEQUENCER_385              0x3181
+#define WM8994_WRITE_SEQUENCER_386              0x3182
+#define WM8994_WRITE_SEQUENCER_387              0x3183
+#define WM8994_WRITE_SEQUENCER_388              0x3184
+#define WM8994_WRITE_SEQUENCER_389              0x3185
+#define WM8994_WRITE_SEQUENCER_390              0x3186
+#define WM8994_WRITE_SEQUENCER_391              0x3187
+#define WM8994_WRITE_SEQUENCER_392              0x3188
+#define WM8994_WRITE_SEQUENCER_393              0x3189
+#define WM8994_WRITE_SEQUENCER_394              0x318A
+#define WM8994_WRITE_SEQUENCER_395              0x318B
+#define WM8994_WRITE_SEQUENCER_396              0x318C
+#define WM8994_WRITE_SEQUENCER_397              0x318D
+#define WM8994_WRITE_SEQUENCER_398              0x318E
+#define WM8994_WRITE_SEQUENCER_399              0x318F
+#define WM8994_WRITE_SEQUENCER_400              0x3190
+#define WM8994_WRITE_SEQUENCER_401              0x3191
+#define WM8994_WRITE_SEQUENCER_402              0x3192
+#define WM8994_WRITE_SEQUENCER_403              0x3193
+#define WM8994_WRITE_SEQUENCER_404              0x3194
+#define WM8994_WRITE_SEQUENCER_405              0x3195
+#define WM8994_WRITE_SEQUENCER_406              0x3196
+#define WM8994_WRITE_SEQUENCER_407              0x3197
+#define WM8994_WRITE_SEQUENCER_408              0x3198
+#define WM8994_WRITE_SEQUENCER_409              0x3199
+#define WM8994_WRITE_SEQUENCER_410              0x319A
+#define WM8994_WRITE_SEQUENCER_411              0x319B
+#define WM8994_WRITE_SEQUENCER_412              0x319C
+#define WM8994_WRITE_SEQUENCER_413              0x319D
+#define WM8994_WRITE_SEQUENCER_414              0x319E
+#define WM8994_WRITE_SEQUENCER_415              0x319F
+#define WM8994_WRITE_SEQUENCER_416              0x31A0
+#define WM8994_WRITE_SEQUENCER_417              0x31A1
+#define WM8994_WRITE_SEQUENCER_418              0x31A2
+#define WM8994_WRITE_SEQUENCER_419              0x31A3
+#define WM8994_WRITE_SEQUENCER_420              0x31A4
+#define WM8994_WRITE_SEQUENCER_421              0x31A5
+#define WM8994_WRITE_SEQUENCER_422              0x31A6
+#define WM8994_WRITE_SEQUENCER_423              0x31A7
+#define WM8994_WRITE_SEQUENCER_424              0x31A8
+#define WM8994_WRITE_SEQUENCER_425              0x31A9
+#define WM8994_WRITE_SEQUENCER_426              0x31AA
+#define WM8994_WRITE_SEQUENCER_427              0x31AB
+#define WM8994_WRITE_SEQUENCER_428              0x31AC
+#define WM8994_WRITE_SEQUENCER_429              0x31AD
+#define WM8994_WRITE_SEQUENCER_430              0x31AE
+#define WM8994_WRITE_SEQUENCER_431              0x31AF
+#define WM8994_WRITE_SEQUENCER_432              0x31B0
+#define WM8994_WRITE_SEQUENCER_433              0x31B1
+#define WM8994_WRITE_SEQUENCER_434              0x31B2
+#define WM8994_WRITE_SEQUENCER_435              0x31B3
+#define WM8994_WRITE_SEQUENCER_436              0x31B4
+#define WM8994_WRITE_SEQUENCER_437              0x31B5
+#define WM8994_WRITE_SEQUENCER_438              0x31B6
+#define WM8994_WRITE_SEQUENCER_439              0x31B7
+#define WM8994_WRITE_SEQUENCER_440              0x31B8
+#define WM8994_WRITE_SEQUENCER_441              0x31B9
+#define WM8994_WRITE_SEQUENCER_442              0x31BA
+#define WM8994_WRITE_SEQUENCER_443              0x31BB
+#define WM8994_WRITE_SEQUENCER_444              0x31BC
+#define WM8994_WRITE_SEQUENCER_445              0x31BD
+#define WM8994_WRITE_SEQUENCER_446              0x31BE
+#define WM8994_WRITE_SEQUENCER_447              0x31BF
+#define WM8994_WRITE_SEQUENCER_448              0x31C0
+#define WM8994_WRITE_SEQUENCER_449              0x31C1
+#define WM8994_WRITE_SEQUENCER_450              0x31C2
+#define WM8994_WRITE_SEQUENCER_451              0x31C3
+#define WM8994_WRITE_SEQUENCER_452              0x31C4
+#define WM8994_WRITE_SEQUENCER_453              0x31C5
+#define WM8994_WRITE_SEQUENCER_454              0x31C6
+#define WM8994_WRITE_SEQUENCER_455              0x31C7
+#define WM8994_WRITE_SEQUENCER_456              0x31C8
+#define WM8994_WRITE_SEQUENCER_457              0x31C9
+#define WM8994_WRITE_SEQUENCER_458              0x31CA
+#define WM8994_WRITE_SEQUENCER_459              0x31CB
+#define WM8994_WRITE_SEQUENCER_460              0x31CC
+#define WM8994_WRITE_SEQUENCER_461              0x31CD
+#define WM8994_WRITE_SEQUENCER_462              0x31CE
+#define WM8994_WRITE_SEQUENCER_463              0x31CF
+#define WM8994_WRITE_SEQUENCER_464              0x31D0
+#define WM8994_WRITE_SEQUENCER_465              0x31D1
+#define WM8994_WRITE_SEQUENCER_466              0x31D2
+#define WM8994_WRITE_SEQUENCER_467              0x31D3
+#define WM8994_WRITE_SEQUENCER_468              0x31D4
+#define WM8994_WRITE_SEQUENCER_469              0x31D5
+#define WM8994_WRITE_SEQUENCER_470              0x31D6
+#define WM8994_WRITE_SEQUENCER_471              0x31D7
+#define WM8994_WRITE_SEQUENCER_472              0x31D8
+#define WM8994_WRITE_SEQUENCER_473              0x31D9
+#define WM8994_WRITE_SEQUENCER_474              0x31DA
+#define WM8994_WRITE_SEQUENCER_475              0x31DB
+#define WM8994_WRITE_SEQUENCER_476              0x31DC
+#define WM8994_WRITE_SEQUENCER_477              0x31DD
+#define WM8994_WRITE_SEQUENCER_478              0x31DE
+#define WM8994_WRITE_SEQUENCER_479              0x31DF
+#define WM8994_WRITE_SEQUENCER_480              0x31E0
+#define WM8994_WRITE_SEQUENCER_481              0x31E1
+#define WM8994_WRITE_SEQUENCER_482              0x31E2
+#define WM8994_WRITE_SEQUENCER_483              0x31E3
+#define WM8994_WRITE_SEQUENCER_484              0x31E4
+#define WM8994_WRITE_SEQUENCER_485              0x31E5
+#define WM8994_WRITE_SEQUENCER_486              0x31E6
+#define WM8994_WRITE_SEQUENCER_487              0x31E7
+#define WM8994_WRITE_SEQUENCER_488              0x31E8
+#define WM8994_WRITE_SEQUENCER_489              0x31E9
+#define WM8994_WRITE_SEQUENCER_490              0x31EA
+#define WM8994_WRITE_SEQUENCER_491              0x31EB
+#define WM8994_WRITE_SEQUENCER_492              0x31EC
+#define WM8994_WRITE_SEQUENCER_493              0x31ED
+#define WM8994_WRITE_SEQUENCER_494              0x31EE
+#define WM8994_WRITE_SEQUENCER_495              0x31EF
+#define WM8994_WRITE_SEQUENCER_496              0x31F0
+#define WM8994_WRITE_SEQUENCER_497              0x31F1
+#define WM8994_WRITE_SEQUENCER_498              0x31F2
+#define WM8994_WRITE_SEQUENCER_499              0x31F3
+#define WM8994_WRITE_SEQUENCER_500              0x31F4
+#define WM8994_WRITE_SEQUENCER_501              0x31F5
+#define WM8994_WRITE_SEQUENCER_502              0x31F6
+#define WM8994_WRITE_SEQUENCER_503              0x31F7
+#define WM8994_WRITE_SEQUENCER_504              0x31F8
+#define WM8994_WRITE_SEQUENCER_505              0x31F9
+#define WM8994_WRITE_SEQUENCER_506              0x31FA
+#define WM8994_WRITE_SEQUENCER_507              0x31FB
+#define WM8994_WRITE_SEQUENCER_508              0x31FC
+#define WM8994_WRITE_SEQUENCER_509              0x31FD
+#define WM8994_WRITE_SEQUENCER_510              0x31FE
+#define WM8994_WRITE_SEQUENCER_511              0x31FF
+
+#define WM8994_REGISTER_COUNT                   736
+#define WM8994_MAX_REGISTER                     0x31FF
+#define WM8994_MAX_CACHED_REGISTER              0x749
+
+/*
+ * Field Definitions.
+ */
+
+/*
+ * R0 (0x00) - Software Reset
+ */
+#define WM8994_SW_RESET_MASK                    0xFFFF  /* SW_RESET - [15:0] */
+#define WM8994_SW_RESET_SHIFT                        0  /* SW_RESET - [15:0] */
+#define WM8994_SW_RESET_WIDTH                       16  /* SW_RESET - [15:0] */
+
+/*
+ * R1 (0x01) - Power Management (1)
+ */
+#define WM8994_SPKOUTR_ENA                      0x2000  /* SPKOUTR_ENA */
+#define WM8994_SPKOUTR_ENA_MASK                 0x2000  /* SPKOUTR_ENA */
+#define WM8994_SPKOUTR_ENA_SHIFT                    13  /* SPKOUTR_ENA */
+#define WM8994_SPKOUTR_ENA_WIDTH                     1  /* SPKOUTR_ENA */
+#define WM8994_SPKOUTL_ENA                      0x1000  /* SPKOUTL_ENA */
+#define WM8994_SPKOUTL_ENA_MASK                 0x1000  /* SPKOUTL_ENA */
+#define WM8994_SPKOUTL_ENA_SHIFT                    12  /* SPKOUTL_ENA */
+#define WM8994_SPKOUTL_ENA_WIDTH                     1  /* SPKOUTL_ENA */
+#define WM8994_HPOUT2_ENA                       0x0800  /* HPOUT2_ENA */
+#define WM8994_HPOUT2_ENA_MASK                  0x0800  /* HPOUT2_ENA */
+#define WM8994_HPOUT2_ENA_SHIFT                     11  /* HPOUT2_ENA */
+#define WM8994_HPOUT2_ENA_WIDTH                      1  /* HPOUT2_ENA */
+#define WM8994_HPOUT1L_ENA                      0x0200  /* HPOUT1L_ENA */
+#define WM8994_HPOUT1L_ENA_MASK                 0x0200  /* HPOUT1L_ENA */
+#define WM8994_HPOUT1L_ENA_SHIFT                     9  /* HPOUT1L_ENA */
+#define WM8994_HPOUT1L_ENA_WIDTH                     1  /* HPOUT1L_ENA */
+#define WM8994_HPOUT1R_ENA                      0x0100  /* HPOUT1R_ENA */
+#define WM8994_HPOUT1R_ENA_MASK                 0x0100  /* HPOUT1R_ENA */
+#define WM8994_HPOUT1R_ENA_SHIFT                     8  /* HPOUT1R_ENA */
+#define WM8994_HPOUT1R_ENA_WIDTH                     1  /* HPOUT1R_ENA */
+#define WM8994_MICB2_ENA                        0x0020  /* MICB2_ENA */
+#define WM8994_MICB2_ENA_MASK                   0x0020  /* MICB2_ENA */
+#define WM8994_MICB2_ENA_SHIFT                       5  /* MICB2_ENA */
+#define WM8994_MICB2_ENA_WIDTH                       1  /* MICB2_ENA */
+#define WM8994_MICB1_ENA                        0x0010  /* MICB1_ENA */
+#define WM8994_MICB1_ENA_MASK                   0x0010  /* MICB1_ENA */
+#define WM8994_MICB1_ENA_SHIFT                       4  /* MICB1_ENA */
+#define WM8994_MICB1_ENA_WIDTH                       1  /* MICB1_ENA */
+#define WM8994_VMID_SEL_MASK                    0x0006  /* VMID_SEL - [2:1] */
+#define WM8994_VMID_SEL_SHIFT                        1  /* VMID_SEL - [2:1] */
+#define WM8994_VMID_SEL_WIDTH                        2  /* VMID_SEL - [2:1] */
+#define WM8994_BIAS_ENA                         0x0001  /* BIAS_ENA */
+#define WM8994_BIAS_ENA_MASK                    0x0001  /* BIAS_ENA */
+#define WM8994_BIAS_ENA_SHIFT                        0  /* BIAS_ENA */
+#define WM8994_BIAS_ENA_WIDTH                        1  /* BIAS_ENA */
+
+/*
+ * R2 (0x02) - Power Management (2)
+ */
+#define WM8994_TSHUT_ENA                        0x4000  /* TSHUT_ENA */
+#define WM8994_TSHUT_ENA_MASK                   0x4000  /* TSHUT_ENA */
+#define WM8994_TSHUT_ENA_SHIFT                      14  /* TSHUT_ENA */
+#define WM8994_TSHUT_ENA_WIDTH                       1  /* TSHUT_ENA */
+#define WM8994_TSHUT_OPDIS                      0x2000  /* TSHUT_OPDIS */
+#define WM8994_TSHUT_OPDIS_MASK                 0x2000  /* TSHUT_OPDIS */
+#define WM8994_TSHUT_OPDIS_SHIFT                    13  /* TSHUT_OPDIS */
+#define WM8994_TSHUT_OPDIS_WIDTH                     1  /* TSHUT_OPDIS */
+#define WM8994_OPCLK_ENA                        0x0800  /* OPCLK_ENA */
+#define WM8994_OPCLK_ENA_MASK                   0x0800  /* OPCLK_ENA */
+#define WM8994_OPCLK_ENA_SHIFT                      11  /* OPCLK_ENA */
+#define WM8994_OPCLK_ENA_WIDTH                       1  /* OPCLK_ENA */
+#define WM8994_MIXINL_ENA                       0x0200  /* MIXINL_ENA */
+#define WM8994_MIXINL_ENA_MASK                  0x0200  /* MIXINL_ENA */
+#define WM8994_MIXINL_ENA_SHIFT                      9  /* MIXINL_ENA */
+#define WM8994_MIXINL_ENA_WIDTH                      1  /* MIXINL_ENA */
+#define WM8994_MIXINR_ENA                       0x0100  /* MIXINR_ENA */
+#define WM8994_MIXINR_ENA_MASK                  0x0100  /* MIXINR_ENA */
+#define WM8994_MIXINR_ENA_SHIFT                      8  /* MIXINR_ENA */
+#define WM8994_MIXINR_ENA_WIDTH                      1  /* MIXINR_ENA */
+#define WM8994_IN2L_ENA                         0x0080  /* IN2L_ENA */
+#define WM8994_IN2L_ENA_MASK                    0x0080  /* IN2L_ENA */
+#define WM8994_IN2L_ENA_SHIFT                        7  /* IN2L_ENA */
+#define WM8994_IN2L_ENA_WIDTH                        1  /* IN2L_ENA */
+#define WM8994_IN1L_ENA                         0x0040  /* IN1L_ENA */
+#define WM8994_IN1L_ENA_MASK                    0x0040  /* IN1L_ENA */
+#define WM8994_IN1L_ENA_SHIFT                        6  /* IN1L_ENA */
+#define WM8994_IN1L_ENA_WIDTH                        1  /* IN1L_ENA */
+#define WM8994_IN2R_ENA                         0x0020  /* IN2R_ENA */
+#define WM8994_IN2R_ENA_MASK                    0x0020  /* IN2R_ENA */
+#define WM8994_IN2R_ENA_SHIFT                        5  /* IN2R_ENA */
+#define WM8994_IN2R_ENA_WIDTH                        1  /* IN2R_ENA */
+#define WM8994_IN1R_ENA                         0x0010  /* IN1R_ENA */
+#define WM8994_IN1R_ENA_MASK                    0x0010  /* IN1R_ENA */
+#define WM8994_IN1R_ENA_SHIFT                        4  /* IN1R_ENA */
+#define WM8994_IN1R_ENA_WIDTH                        1  /* IN1R_ENA */
+
+/*
+ * R3 (0x03) - Power Management (3)
+ */
+#define WM8994_LINEOUT1N_ENA                    0x2000  /* LINEOUT1N_ENA */
+#define WM8994_LINEOUT1N_ENA_MASK               0x2000  /* LINEOUT1N_ENA */
+#define WM8994_LINEOUT1N_ENA_SHIFT                  13  /* LINEOUT1N_ENA */
+#define WM8994_LINEOUT1N_ENA_WIDTH                   1  /* LINEOUT1N_ENA */
+#define WM8994_LINEOUT1P_ENA                    0x1000  /* LINEOUT1P_ENA */
+#define WM8994_LINEOUT1P_ENA_MASK               0x1000  /* LINEOUT1P_ENA */
+#define WM8994_LINEOUT1P_ENA_SHIFT                  12  /* LINEOUT1P_ENA */
+#define WM8994_LINEOUT1P_ENA_WIDTH                   1  /* LINEOUT1P_ENA */
+#define WM8994_LINEOUT2N_ENA                    0x0800  /* LINEOUT2N_ENA */
+#define WM8994_LINEOUT2N_ENA_MASK               0x0800  /* LINEOUT2N_ENA */
+#define WM8994_LINEOUT2N_ENA_SHIFT                  11  /* LINEOUT2N_ENA */
+#define WM8994_LINEOUT2N_ENA_WIDTH                   1  /* LINEOUT2N_ENA */
+#define WM8994_LINEOUT2P_ENA                    0x0400  /* LINEOUT2P_ENA */
+#define WM8994_LINEOUT2P_ENA_MASK               0x0400  /* LINEOUT2P_ENA */
+#define WM8994_LINEOUT2P_ENA_SHIFT                  10  /* LINEOUT2P_ENA */
+#define WM8994_LINEOUT2P_ENA_WIDTH                   1  /* LINEOUT2P_ENA */
+#define WM8994_SPKRVOL_ENA                      0x0200  /* SPKRVOL_ENA */
+#define WM8994_SPKRVOL_ENA_MASK                 0x0200  /* SPKRVOL_ENA */
+#define WM8994_SPKRVOL_ENA_SHIFT                     9  /* SPKRVOL_ENA */
+#define WM8994_SPKRVOL_ENA_WIDTH                     1  /* SPKRVOL_ENA */
+#define WM8994_SPKLVOL_ENA                      0x0100  /* SPKLVOL_ENA */
+#define WM8994_SPKLVOL_ENA_MASK                 0x0100  /* SPKLVOL_ENA */
+#define WM8994_SPKLVOL_ENA_SHIFT                     8  /* SPKLVOL_ENA */
+#define WM8994_SPKLVOL_ENA_WIDTH                     1  /* SPKLVOL_ENA */
+#define WM8994_MIXOUTLVOL_ENA                   0x0080  /* MIXOUTLVOL_ENA */
+#define WM8994_MIXOUTLVOL_ENA_MASK              0x0080  /* MIXOUTLVOL_ENA */
+#define WM8994_MIXOUTLVOL_ENA_SHIFT                  7  /* MIXOUTLVOL_ENA */
+#define WM8994_MIXOUTLVOL_ENA_WIDTH                  1  /* MIXOUTLVOL_ENA */
+#define WM8994_MIXOUTRVOL_ENA                   0x0040  /* MIXOUTRVOL_ENA */
+#define WM8994_MIXOUTRVOL_ENA_MASK              0x0040  /* MIXOUTRVOL_ENA */
+#define WM8994_MIXOUTRVOL_ENA_SHIFT                  6  /* MIXOUTRVOL_ENA */
+#define WM8994_MIXOUTRVOL_ENA_WIDTH                  1  /* MIXOUTRVOL_ENA */
+#define WM8994_MIXOUTL_ENA                      0x0020  /* MIXOUTL_ENA */
+#define WM8994_MIXOUTL_ENA_MASK                 0x0020  /* MIXOUTL_ENA */
+#define WM8994_MIXOUTL_ENA_SHIFT                     5  /* MIXOUTL_ENA */
+#define WM8994_MIXOUTL_ENA_WIDTH                     1  /* MIXOUTL_ENA */
+#define WM8994_MIXOUTR_ENA                      0x0010  /* MIXOUTR_ENA */
+#define WM8994_MIXOUTR_ENA_MASK                 0x0010  /* MIXOUTR_ENA */
+#define WM8994_MIXOUTR_ENA_SHIFT                     4  /* MIXOUTR_ENA */
+#define WM8994_MIXOUTR_ENA_WIDTH                     1  /* MIXOUTR_ENA */
+
+/*
+ * R4 (0x04) - Power Management (4)
+ */
+#define WM8994_AIF2ADCL_ENA                     0x2000  /* AIF2ADCL_ENA */
+#define WM8994_AIF2ADCL_ENA_MASK                0x2000  /* AIF2ADCL_ENA */
+#define WM8994_AIF2ADCL_ENA_SHIFT                   13  /* AIF2ADCL_ENA */
+#define WM8994_AIF2ADCL_ENA_WIDTH                    1  /* AIF2ADCL_ENA */
+#define WM8994_AIF2ADCR_ENA                     0x1000  /* AIF2ADCR_ENA */
+#define WM8994_AIF2ADCR_ENA_MASK                0x1000  /* AIF2ADCR_ENA */
+#define WM8994_AIF2ADCR_ENA_SHIFT                   12  /* AIF2ADCR_ENA */
+#define WM8994_AIF2ADCR_ENA_WIDTH                    1  /* AIF2ADCR_ENA */
+#define WM8994_AIF1ADC2L_ENA                    0x0800  /* AIF1ADC2L_ENA */
+#define WM8994_AIF1ADC2L_ENA_MASK               0x0800  /* AIF1ADC2L_ENA */
+#define WM8994_AIF1ADC2L_ENA_SHIFT                  11  /* AIF1ADC2L_ENA */
+#define WM8994_AIF1ADC2L_ENA_WIDTH                   1  /* AIF1ADC2L_ENA */
+#define WM8994_AIF1ADC2R_ENA                    0x0400  /* AIF1ADC2R_ENA */
+#define WM8994_AIF1ADC2R_ENA_MASK               0x0400  /* AIF1ADC2R_ENA */
+#define WM8994_AIF1ADC2R_ENA_SHIFT                  10  /* AIF1ADC2R_ENA */
+#define WM8994_AIF1ADC2R_ENA_WIDTH                   1  /* AIF1ADC2R_ENA */
+#define WM8994_AIF1ADC1L_ENA                    0x0200  /* AIF1ADC1L_ENA */
+#define WM8994_AIF1ADC1L_ENA_MASK               0x0200  /* AIF1ADC1L_ENA */
+#define WM8994_AIF1ADC1L_ENA_SHIFT                   9  /* AIF1ADC1L_ENA */
+#define WM8994_AIF1ADC1L_ENA_WIDTH                   1  /* AIF1ADC1L_ENA */
+#define WM8994_AIF1ADC1R_ENA                    0x0100  /* AIF1ADC1R_ENA */
+#define WM8994_AIF1ADC1R_ENA_MASK               0x0100  /* AIF1ADC1R_ENA */
+#define WM8994_AIF1ADC1R_ENA_SHIFT                   8  /* AIF1ADC1R_ENA */
+#define WM8994_AIF1ADC1R_ENA_WIDTH                   1  /* AIF1ADC1R_ENA */
+#define WM8994_DMIC2L_ENA                       0x0020  /* DMIC2L_ENA */
+#define WM8994_DMIC2L_ENA_MASK                  0x0020  /* DMIC2L_ENA */
+#define WM8994_DMIC2L_ENA_SHIFT                      5  /* DMIC2L_ENA */
+#define WM8994_DMIC2L_ENA_WIDTH                      1  /* DMIC2L_ENA */
+#define WM8994_DMIC2R_ENA                       0x0010  /* DMIC2R_ENA */
+#define WM8994_DMIC2R_ENA_MASK                  0x0010  /* DMIC2R_ENA */
+#define WM8994_DMIC2R_ENA_SHIFT                      4  /* DMIC2R_ENA */
+#define WM8994_DMIC2R_ENA_WIDTH                      1  /* DMIC2R_ENA */
+#define WM8994_DMIC1L_ENA                       0x0008  /* DMIC1L_ENA */
+#define WM8994_DMIC1L_ENA_MASK                  0x0008  /* DMIC1L_ENA */
+#define WM8994_DMIC1L_ENA_SHIFT                      3  /* DMIC1L_ENA */
+#define WM8994_DMIC1L_ENA_WIDTH                      1  /* DMIC1L_ENA */
+#define WM8994_DMIC1R_ENA                       0x0004  /* DMIC1R_ENA */
+#define WM8994_DMIC1R_ENA_MASK                  0x0004  /* DMIC1R_ENA */
+#define WM8994_DMIC1R_ENA_SHIFT                      2  /* DMIC1R_ENA */
+#define WM8994_DMIC1R_ENA_WIDTH                      1  /* DMIC1R_ENA */
+#define WM8994_ADCL_ENA                         0x0002  /* ADCL_ENA */
+#define WM8994_ADCL_ENA_MASK                    0x0002  /* ADCL_ENA */
+#define WM8994_ADCL_ENA_SHIFT                        1  /* ADCL_ENA */
+#define WM8994_ADCL_ENA_WIDTH                        1  /* ADCL_ENA */
+#define WM8994_ADCR_ENA                         0x0001  /* ADCR_ENA */
+#define WM8994_ADCR_ENA_MASK                    0x0001  /* ADCR_ENA */
+#define WM8994_ADCR_ENA_SHIFT                        0  /* ADCR_ENA */
+#define WM8994_ADCR_ENA_WIDTH                        1  /* ADCR_ENA */
+
+/*
+ * R5 (0x05) - Power Management (5)
+ */
+#define WM8994_AIF2DACL_ENA                     0x2000  /* AIF2DACL_ENA */
+#define WM8994_AIF2DACL_ENA_MASK                0x2000  /* AIF2DACL_ENA */
+#define WM8994_AIF2DACL_ENA_SHIFT                   13  /* AIF2DACL_ENA */
+#define WM8994_AIF2DACL_ENA_WIDTH                    1  /* AIF2DACL_ENA */
+#define WM8994_AIF2DACR_ENA                     0x1000  /* AIF2DACR_ENA */
+#define WM8994_AIF2DACR_ENA_MASK                0x1000  /* AIF2DACR_ENA */
+#define WM8994_AIF2DACR_ENA_SHIFT                   12  /* AIF2DACR_ENA */
+#define WM8994_AIF2DACR_ENA_WIDTH                    1  /* AIF2DACR_ENA */
+#define WM8994_AIF1DAC2L_ENA                    0x0800  /* AIF1DAC2L_ENA */
+#define WM8994_AIF1DAC2L_ENA_MASK               0x0800  /* AIF1DAC2L_ENA */
+#define WM8994_AIF1DAC2L_ENA_SHIFT                  11  /* AIF1DAC2L_ENA */
+#define WM8994_AIF1DAC2L_ENA_WIDTH                   1  /* AIF1DAC2L_ENA */
+#define WM8994_AIF1DAC2R_ENA                    0x0400  /* AIF1DAC2R_ENA */
+#define WM8994_AIF1DAC2R_ENA_MASK               0x0400  /* AIF1DAC2R_ENA */
+#define WM8994_AIF1DAC2R_ENA_SHIFT                  10  /* AIF1DAC2R_ENA */
+#define WM8994_AIF1DAC2R_ENA_WIDTH                   1  /* AIF1DAC2R_ENA */
+#define WM8994_AIF1DAC1L_ENA                    0x0200  /* AIF1DAC1L_ENA */
+#define WM8994_AIF1DAC1L_ENA_MASK               0x0200  /* AIF1DAC1L_ENA */
+#define WM8994_AIF1DAC1L_ENA_SHIFT                   9  /* AIF1DAC1L_ENA */
+#define WM8994_AIF1DAC1L_ENA_WIDTH                   1  /* AIF1DAC1L_ENA */
+#define WM8994_AIF1DAC1R_ENA                    0x0100  /* AIF1DAC1R_ENA */
+#define WM8994_AIF1DAC1R_ENA_MASK               0x0100  /* AIF1DAC1R_ENA */
+#define WM8994_AIF1DAC1R_ENA_SHIFT                   8  /* AIF1DAC1R_ENA */
+#define WM8994_AIF1DAC1R_ENA_WIDTH                   1  /* AIF1DAC1R_ENA */
+#define WM8994_DAC2L_ENA                        0x0008  /* DAC2L_ENA */
+#define WM8994_DAC2L_ENA_MASK                   0x0008  /* DAC2L_ENA */
+#define WM8994_DAC2L_ENA_SHIFT                       3  /* DAC2L_ENA */
+#define WM8994_DAC2L_ENA_WIDTH                       1  /* DAC2L_ENA */
+#define WM8994_DAC2R_ENA                        0x0004  /* DAC2R_ENA */
+#define WM8994_DAC2R_ENA_MASK                   0x0004  /* DAC2R_ENA */
+#define WM8994_DAC2R_ENA_SHIFT                       2  /* DAC2R_ENA */
+#define WM8994_DAC2R_ENA_WIDTH                       1  /* DAC2R_ENA */
+#define WM8994_DAC1L_ENA                        0x0002  /* DAC1L_ENA */
+#define WM8994_DAC1L_ENA_MASK                   0x0002  /* DAC1L_ENA */
+#define WM8994_DAC1L_ENA_SHIFT                       1  /* DAC1L_ENA */
+#define WM8994_DAC1L_ENA_WIDTH                       1  /* DAC1L_ENA */
+#define WM8994_DAC1R_ENA                        0x0001  /* DAC1R_ENA */
+#define WM8994_DAC1R_ENA_MASK                   0x0001  /* DAC1R_ENA */
+#define WM8994_DAC1R_ENA_SHIFT                       0  /* DAC1R_ENA */
+#define WM8994_DAC1R_ENA_WIDTH                       1  /* DAC1R_ENA */
+
+/*
+ * R6 (0x06) - Power Management (6)
+ */
+#define WM8958_AIF3ADC_SRC_MASK                 0x0600  /* AIF3ADC_SRC - [10:9] */
+#define WM8958_AIF3ADC_SRC_SHIFT                     9  /* AIF3ADC_SRC - [10:9] */
+#define WM8958_AIF3ADC_SRC_WIDTH                     2  /* AIF3ADC_SRC - [10:9] */
+#define WM8958_AIF2DAC_SRC_MASK                 0x0180  /* AIF2DAC_SRC - [8:7] */
+#define WM8958_AIF2DAC_SRC_SHIFT                     7  /* AIF2DAC_SRC - [8:7] */
+#define WM8958_AIF2DAC_SRC_WIDTH                     2  /* AIF2DAC_SRC - [8:7] */
+#define WM8994_AIF3_TRI                         0x0020  /* AIF3_TRI */
+#define WM8994_AIF3_TRI_MASK                    0x0020  /* AIF3_TRI */
+#define WM8994_AIF3_TRI_SHIFT                        5  /* AIF3_TRI */
+#define WM8994_AIF3_TRI_WIDTH                        1  /* AIF3_TRI */
+#define WM8994_AIF3_ADCDAT_SRC_MASK             0x0018  /* AIF3_ADCDAT_SRC - [4:3] */
+#define WM8994_AIF3_ADCDAT_SRC_SHIFT                 3  /* AIF3_ADCDAT_SRC - [4:3] */
+#define WM8994_AIF3_ADCDAT_SRC_WIDTH                 2  /* AIF3_ADCDAT_SRC - [4:3] */
+#define WM8994_AIF2_ADCDAT_SRC                  0x0004  /* AIF2_ADCDAT_SRC */
+#define WM8994_AIF2_ADCDAT_SRC_MASK             0x0004  /* AIF2_ADCDAT_SRC */
+#define WM8994_AIF2_ADCDAT_SRC_SHIFT                 2  /* AIF2_ADCDAT_SRC */
+#define WM8994_AIF2_ADCDAT_SRC_WIDTH                 1  /* AIF2_ADCDAT_SRC */
+#define WM8994_AIF2_DACDAT_SRC                  0x0002  /* AIF2_DACDAT_SRC */
+#define WM8994_AIF2_DACDAT_SRC_MASK             0x0002  /* AIF2_DACDAT_SRC */
+#define WM8994_AIF2_DACDAT_SRC_SHIFT                 1  /* AIF2_DACDAT_SRC */
+#define WM8994_AIF2_DACDAT_SRC_WIDTH                 1  /* AIF2_DACDAT_SRC */
+#define WM8994_AIF1_DACDAT_SRC                  0x0001  /* AIF1_DACDAT_SRC */
+#define WM8994_AIF1_DACDAT_SRC_MASK             0x0001  /* AIF1_DACDAT_SRC */
+#define WM8994_AIF1_DACDAT_SRC_SHIFT                 0  /* AIF1_DACDAT_SRC */
+#define WM8994_AIF1_DACDAT_SRC_WIDTH                 1  /* AIF1_DACDAT_SRC */
+
+/*
+ * R21 (0x15) - Input Mixer (1)
+ */
+#define WM8994_IN1RP_MIXINR_BOOST               0x0100  /* IN1RP_MIXINR_BOOST */
+#define WM8994_IN1RP_MIXINR_BOOST_MASK          0x0100  /* IN1RP_MIXINR_BOOST */
+#define WM8994_IN1RP_MIXINR_BOOST_SHIFT              8  /* IN1RP_MIXINR_BOOST */
+#define WM8994_IN1RP_MIXINR_BOOST_WIDTH              1  /* IN1RP_MIXINR_BOOST */
+#define WM8994_IN1LP_MIXINL_BOOST               0x0080  /* IN1LP_MIXINL_BOOST */
+#define WM8994_IN1LP_MIXINL_BOOST_MASK          0x0080  /* IN1LP_MIXINL_BOOST */
+#define WM8994_IN1LP_MIXINL_BOOST_SHIFT              7  /* IN1LP_MIXINL_BOOST */
+#define WM8994_IN1LP_MIXINL_BOOST_WIDTH              1  /* IN1LP_MIXINL_BOOST */
+#define WM8994_INPUTS_CLAMP                     0x0040  /* INPUTS_CLAMP */
+#define WM8994_INPUTS_CLAMP_MASK                0x0040  /* INPUTS_CLAMP */
+#define WM8994_INPUTS_CLAMP_SHIFT                    6  /* INPUTS_CLAMP */
+#define WM8994_INPUTS_CLAMP_WIDTH                    1  /* INPUTS_CLAMP */
+
+/*
+ * R24 (0x18) - Left Line Input 1&2 Volume
+ */
+#define WM8994_IN1_VU                           0x0100  /* IN1_VU */
+#define WM8994_IN1_VU_MASK                      0x0100  /* IN1_VU */
+#define WM8994_IN1_VU_SHIFT                          8  /* IN1_VU */
+#define WM8994_IN1_VU_WIDTH                          1  /* IN1_VU */
+#define WM8994_IN1L_MUTE                        0x0080  /* IN1L_MUTE */
+#define WM8994_IN1L_MUTE_MASK                   0x0080  /* IN1L_MUTE */
+#define WM8994_IN1L_MUTE_SHIFT                       7  /* IN1L_MUTE */
+#define WM8994_IN1L_MUTE_WIDTH                       1  /* IN1L_MUTE */
+#define WM8994_IN1L_ZC                          0x0040  /* IN1L_ZC */
+#define WM8994_IN1L_ZC_MASK                     0x0040  /* IN1L_ZC */
+#define WM8994_IN1L_ZC_SHIFT                         6  /* IN1L_ZC */
+#define WM8994_IN1L_ZC_WIDTH                         1  /* IN1L_ZC */
+#define WM8994_IN1L_VOL_MASK                    0x001F  /* IN1L_VOL - [4:0] */
+#define WM8994_IN1L_VOL_SHIFT                        0  /* IN1L_VOL - [4:0] */
+#define WM8994_IN1L_VOL_WIDTH                        5  /* IN1L_VOL - [4:0] */
+
+/*
+ * R25 (0x19) - Left Line Input 3&4 Volume
+ */
+#define WM8994_IN2_VU                           0x0100  /* IN2_VU */
+#define WM8994_IN2_VU_MASK                      0x0100  /* IN2_VU */
+#define WM8994_IN2_VU_SHIFT                          8  /* IN2_VU */
+#define WM8994_IN2_VU_WIDTH                          1  /* IN2_VU */
+#define WM8994_IN2L_MUTE                        0x0080  /* IN2L_MUTE */
+#define WM8994_IN2L_MUTE_MASK                   0x0080  /* IN2L_MUTE */
+#define WM8994_IN2L_MUTE_SHIFT                       7  /* IN2L_MUTE */
+#define WM8994_IN2L_MUTE_WIDTH                       1  /* IN2L_MUTE */
+#define WM8994_IN2L_ZC                          0x0040  /* IN2L_ZC */
+#define WM8994_IN2L_ZC_MASK                     0x0040  /* IN2L_ZC */
+#define WM8994_IN2L_ZC_SHIFT                         6  /* IN2L_ZC */
+#define WM8994_IN2L_ZC_WIDTH                         1  /* IN2L_ZC */
+#define WM8994_IN2L_VOL_MASK                    0x001F  /* IN2L_VOL - [4:0] */
+#define WM8994_IN2L_VOL_SHIFT                        0  /* IN2L_VOL - [4:0] */
+#define WM8994_IN2L_VOL_WIDTH                        5  /* IN2L_VOL - [4:0] */
+
+/*
+ * R26 (0x1A) - Right Line Input 1&2 Volume
+ */
+#define WM8994_IN1_VU                           0x0100  /* IN1_VU */
+#define WM8994_IN1_VU_MASK                      0x0100  /* IN1_VU */
+#define WM8994_IN1_VU_SHIFT                          8  /* IN1_VU */
+#define WM8994_IN1_VU_WIDTH                          1  /* IN1_VU */
+#define WM8994_IN1R_MUTE                        0x0080  /* IN1R_MUTE */
+#define WM8994_IN1R_MUTE_MASK                   0x0080  /* IN1R_MUTE */
+#define WM8994_IN1R_MUTE_SHIFT                       7  /* IN1R_MUTE */
+#define WM8994_IN1R_MUTE_WIDTH                       1  /* IN1R_MUTE */
+#define WM8994_IN1R_ZC                          0x0040  /* IN1R_ZC */
+#define WM8994_IN1R_ZC_MASK                     0x0040  /* IN1R_ZC */
+#define WM8994_IN1R_ZC_SHIFT                         6  /* IN1R_ZC */
+#define WM8994_IN1R_ZC_WIDTH                         1  /* IN1R_ZC */
+#define WM8994_IN1R_VOL_MASK                    0x001F  /* IN1R_VOL - [4:0] */
+#define WM8994_IN1R_VOL_SHIFT                        0  /* IN1R_VOL - [4:0] */
+#define WM8994_IN1R_VOL_WIDTH                        5  /* IN1R_VOL - [4:0] */
+
+/*
+ * R27 (0x1B) - Right Line Input 3&4 Volume
+ */
+#define WM8994_IN2_VU                           0x0100  /* IN2_VU */
+#define WM8994_IN2_VU_MASK                      0x0100  /* IN2_VU */
+#define WM8994_IN2_VU_SHIFT                          8  /* IN2_VU */
+#define WM8994_IN2_VU_WIDTH                          1  /* IN2_VU */
+#define WM8994_IN2R_MUTE                        0x0080  /* IN2R_MUTE */
+#define WM8994_IN2R_MUTE_MASK                   0x0080  /* IN2R_MUTE */
+#define WM8994_IN2R_MUTE_SHIFT                       7  /* IN2R_MUTE */
+#define WM8994_IN2R_MUTE_WIDTH                       1  /* IN2R_MUTE */
+#define WM8994_IN2R_ZC                          0x0040  /* IN2R_ZC */
+#define WM8994_IN2R_ZC_MASK                     0x0040  /* IN2R_ZC */
+#define WM8994_IN2R_ZC_SHIFT                         6  /* IN2R_ZC */
+#define WM8994_IN2R_ZC_WIDTH                         1  /* IN2R_ZC */
+#define WM8994_IN2R_VOL_MASK                    0x001F  /* IN2R_VOL - [4:0] */
+#define WM8994_IN2R_VOL_SHIFT                        0  /* IN2R_VOL - [4:0] */
+#define WM8994_IN2R_VOL_WIDTH                        5  /* IN2R_VOL - [4:0] */
+
+/*
+ * R28 (0x1C) - Left Output Volume
+ */
+#define WM8994_HPOUT1_VU                        0x0100  /* HPOUT1_VU */
+#define WM8994_HPOUT1_VU_MASK                   0x0100  /* HPOUT1_VU */
+#define WM8994_HPOUT1_VU_SHIFT                       8  /* HPOUT1_VU */
+#define WM8994_HPOUT1_VU_WIDTH                       1  /* HPOUT1_VU */
+#define WM8994_HPOUT1L_ZC                       0x0080  /* HPOUT1L_ZC */
+#define WM8994_HPOUT1L_ZC_MASK                  0x0080  /* HPOUT1L_ZC */
+#define WM8994_HPOUT1L_ZC_SHIFT                      7  /* HPOUT1L_ZC */
+#define WM8994_HPOUT1L_ZC_WIDTH                      1  /* HPOUT1L_ZC */
+#define WM8994_HPOUT1L_MUTE_N                   0x0040  /* HPOUT1L_MUTE_N */
+#define WM8994_HPOUT1L_MUTE_N_MASK              0x0040  /* HPOUT1L_MUTE_N */
+#define WM8994_HPOUT1L_MUTE_N_SHIFT                  6  /* HPOUT1L_MUTE_N */
+#define WM8994_HPOUT1L_MUTE_N_WIDTH                  1  /* HPOUT1L_MUTE_N */
+#define WM8994_HPOUT1L_VOL_MASK                 0x003F  /* HPOUT1L_VOL - [5:0] */
+#define WM8994_HPOUT1L_VOL_SHIFT                     0  /* HPOUT1L_VOL - [5:0] */
+#define WM8994_HPOUT1L_VOL_WIDTH                     6  /* HPOUT1L_VOL - [5:0] */
+
+/*
+ * R29 (0x1D) - Right Output Volume
+ */
+#define WM8994_HPOUT1_VU                        0x0100  /* HPOUT1_VU */
+#define WM8994_HPOUT1_VU_MASK                   0x0100  /* HPOUT1_VU */
+#define WM8994_HPOUT1_VU_SHIFT                       8  /* HPOUT1_VU */
+#define WM8994_HPOUT1_VU_WIDTH                       1  /* HPOUT1_VU */
+#define WM8994_HPOUT1R_ZC                       0x0080  /* HPOUT1R_ZC */
+#define WM8994_HPOUT1R_ZC_MASK                  0x0080  /* HPOUT1R_ZC */
+#define WM8994_HPOUT1R_ZC_SHIFT                      7  /* HPOUT1R_ZC */
+#define WM8994_HPOUT1R_ZC_WIDTH                      1  /* HPOUT1R_ZC */
+#define WM8994_HPOUT1R_MUTE_N                   0x0040  /* HPOUT1R_MUTE_N */
+#define WM8994_HPOUT1R_MUTE_N_MASK              0x0040  /* HPOUT1R_MUTE_N */
+#define WM8994_HPOUT1R_MUTE_N_SHIFT                  6  /* HPOUT1R_MUTE_N */
+#define WM8994_HPOUT1R_MUTE_N_WIDTH                  1  /* HPOUT1R_MUTE_N */
+#define WM8994_HPOUT1R_VOL_MASK                 0x003F  /* HPOUT1R_VOL - [5:0] */
+#define WM8994_HPOUT1R_VOL_SHIFT                     0  /* HPOUT1R_VOL - [5:0] */
+#define WM8994_HPOUT1R_VOL_WIDTH                     6  /* HPOUT1R_VOL - [5:0] */
+
+/*
+ * R30 (0x1E) - Line Outputs Volume
+ */
+#define WM8994_LINEOUT1N_MUTE                   0x0040  /* LINEOUT1N_MUTE */
+#define WM8994_LINEOUT1N_MUTE_MASK              0x0040  /* LINEOUT1N_MUTE */
+#define WM8994_LINEOUT1N_MUTE_SHIFT                  6  /* LINEOUT1N_MUTE */
+#define WM8994_LINEOUT1N_MUTE_WIDTH                  1  /* LINEOUT1N_MUTE */
+#define WM8994_LINEOUT1P_MUTE                   0x0020  /* LINEOUT1P_MUTE */
+#define WM8994_LINEOUT1P_MUTE_MASK              0x0020  /* LINEOUT1P_MUTE */
+#define WM8994_LINEOUT1P_MUTE_SHIFT                  5  /* LINEOUT1P_MUTE */
+#define WM8994_LINEOUT1P_MUTE_WIDTH                  1  /* LINEOUT1P_MUTE */
+#define WM8994_LINEOUT1_VOL                     0x0010  /* LINEOUT1_VOL */
+#define WM8994_LINEOUT1_VOL_MASK                0x0010  /* LINEOUT1_VOL */
+#define WM8994_LINEOUT1_VOL_SHIFT                    4  /* LINEOUT1_VOL */
+#define WM8994_LINEOUT1_VOL_WIDTH                    1  /* LINEOUT1_VOL */
+#define WM8994_LINEOUT2N_MUTE                   0x0004  /* LINEOUT2N_MUTE */
+#define WM8994_LINEOUT2N_MUTE_MASK              0x0004  /* LINEOUT2N_MUTE */
+#define WM8994_LINEOUT2N_MUTE_SHIFT                  2  /* LINEOUT2N_MUTE */
+#define WM8994_LINEOUT2N_MUTE_WIDTH                  1  /* LINEOUT2N_MUTE */
+#define WM8994_LINEOUT2P_MUTE                   0x0002  /* LINEOUT2P_MUTE */
+#define WM8994_LINEOUT2P_MUTE_MASK              0x0002  /* LINEOUT2P_MUTE */
+#define WM8994_LINEOUT2P_MUTE_SHIFT                  1  /* LINEOUT2P_MUTE */
+#define WM8994_LINEOUT2P_MUTE_WIDTH                  1  /* LINEOUT2P_MUTE */
+#define WM8994_LINEOUT2_VOL                     0x0001  /* LINEOUT2_VOL */
+#define WM8994_LINEOUT2_VOL_MASK                0x0001  /* LINEOUT2_VOL */
+#define WM8994_LINEOUT2_VOL_SHIFT                    0  /* LINEOUT2_VOL */
+#define WM8994_LINEOUT2_VOL_WIDTH                    1  /* LINEOUT2_VOL */
+
+/*
+ * R31 (0x1F) - HPOUT2 Volume
+ */
+#define WM8994_HPOUT2_MUTE                      0x0020  /* HPOUT2_MUTE */
+#define WM8994_HPOUT2_MUTE_MASK                 0x0020  /* HPOUT2_MUTE */
+#define WM8994_HPOUT2_MUTE_SHIFT                     5  /* HPOUT2_MUTE */
+#define WM8994_HPOUT2_MUTE_WIDTH                     1  /* HPOUT2_MUTE */
+#define WM8994_HPOUT2_VOL                       0x0010  /* HPOUT2_VOL */
+#define WM8994_HPOUT2_VOL_MASK                  0x0010  /* HPOUT2_VOL */
+#define WM8994_HPOUT2_VOL_SHIFT                      4  /* HPOUT2_VOL */
+#define WM8994_HPOUT2_VOL_WIDTH                      1  /* HPOUT2_VOL */
+
+/*
+ * R32 (0x20) - Left OPGA Volume
+ */
+#define WM8994_MIXOUT_VU                        0x0100  /* MIXOUT_VU */
+#define WM8994_MIXOUT_VU_MASK                   0x0100  /* MIXOUT_VU */
+#define WM8994_MIXOUT_VU_SHIFT                       8  /* MIXOUT_VU */
+#define WM8994_MIXOUT_VU_WIDTH                       1  /* MIXOUT_VU */
+#define WM8994_MIXOUTL_ZC                       0x0080  /* MIXOUTL_ZC */
+#define WM8994_MIXOUTL_ZC_MASK                  0x0080  /* MIXOUTL_ZC */
+#define WM8994_MIXOUTL_ZC_SHIFT                      7  /* MIXOUTL_ZC */
+#define WM8994_MIXOUTL_ZC_WIDTH                      1  /* MIXOUTL_ZC */
+#define WM8994_MIXOUTL_MUTE_N                   0x0040  /* MIXOUTL_MUTE_N */
+#define WM8994_MIXOUTL_MUTE_N_MASK              0x0040  /* MIXOUTL_MUTE_N */
+#define WM8994_MIXOUTL_MUTE_N_SHIFT                  6  /* MIXOUTL_MUTE_N */
+#define WM8994_MIXOUTL_MUTE_N_WIDTH                  1  /* MIXOUTL_MUTE_N */
+#define WM8994_MIXOUTL_VOL_MASK                 0x003F  /* MIXOUTL_VOL - [5:0] */
+#define WM8994_MIXOUTL_VOL_SHIFT                     0  /* MIXOUTL_VOL - [5:0] */
+#define WM8994_MIXOUTL_VOL_WIDTH                     6  /* MIXOUTL_VOL - [5:0] */
+
+/*
+ * R33 (0x21) - Right OPGA Volume
+ */
+#define WM8994_MIXOUT_VU                        0x0100  /* MIXOUT_VU */
+#define WM8994_MIXOUT_VU_MASK                   0x0100  /* MIXOUT_VU */
+#define WM8994_MIXOUT_VU_SHIFT                       8  /* MIXOUT_VU */
+#define WM8994_MIXOUT_VU_WIDTH                       1  /* MIXOUT_VU */
+#define WM8994_MIXOUTR_ZC                       0x0080  /* MIXOUTR_ZC */
+#define WM8994_MIXOUTR_ZC_MASK                  0x0080  /* MIXOUTR_ZC */
+#define WM8994_MIXOUTR_ZC_SHIFT                      7  /* MIXOUTR_ZC */
+#define WM8994_MIXOUTR_ZC_WIDTH                      1  /* MIXOUTR_ZC */
+#define WM8994_MIXOUTR_MUTE_N                   0x0040  /* MIXOUTR_MUTE_N */
+#define WM8994_MIXOUTR_MUTE_N_MASK              0x0040  /* MIXOUTR_MUTE_N */
+#define WM8994_MIXOUTR_MUTE_N_SHIFT                  6  /* MIXOUTR_MUTE_N */
+#define WM8994_MIXOUTR_MUTE_N_WIDTH                  1  /* MIXOUTR_MUTE_N */
+#define WM8994_MIXOUTR_VOL_MASK                 0x003F  /* MIXOUTR_VOL - [5:0] */
+#define WM8994_MIXOUTR_VOL_SHIFT                     0  /* MIXOUTR_VOL - [5:0] */
+#define WM8994_MIXOUTR_VOL_WIDTH                     6  /* MIXOUTR_VOL - [5:0] */
+
+/*
+ * R34 (0x22) - SPKMIXL Attenuation
+ */
+#define WM8994_DAC2L_SPKMIXL_VOL                0x0040  /* DAC2L_SPKMIXL_VOL */
+#define WM8994_DAC2L_SPKMIXL_VOL_MASK           0x0040  /* DAC2L_SPKMIXL_VOL */
+#define WM8994_DAC2L_SPKMIXL_VOL_SHIFT               6  /* DAC2L_SPKMIXL_VOL */
+#define WM8994_DAC2L_SPKMIXL_VOL_WIDTH               1  /* DAC2L_SPKMIXL_VOL */
+#define WM8994_MIXINL_SPKMIXL_VOL               0x0020  /* MIXINL_SPKMIXL_VOL */
+#define WM8994_MIXINL_SPKMIXL_VOL_MASK          0x0020  /* MIXINL_SPKMIXL_VOL */
+#define WM8994_MIXINL_SPKMIXL_VOL_SHIFT              5  /* MIXINL_SPKMIXL_VOL */
+#define WM8994_MIXINL_SPKMIXL_VOL_WIDTH              1  /* MIXINL_SPKMIXL_VOL */
+#define WM8994_IN1LP_SPKMIXL_VOL                0x0010  /* IN1LP_SPKMIXL_VOL */
+#define WM8994_IN1LP_SPKMIXL_VOL_MASK           0x0010  /* IN1LP_SPKMIXL_VOL */
+#define WM8994_IN1LP_SPKMIXL_VOL_SHIFT               4  /* IN1LP_SPKMIXL_VOL */
+#define WM8994_IN1LP_SPKMIXL_VOL_WIDTH               1  /* IN1LP_SPKMIXL_VOL */
+#define WM8994_MIXOUTL_SPKMIXL_VOL              0x0008  /* MIXOUTL_SPKMIXL_VOL */
+#define WM8994_MIXOUTL_SPKMIXL_VOL_MASK         0x0008  /* MIXOUTL_SPKMIXL_VOL */
+#define WM8994_MIXOUTL_SPKMIXL_VOL_SHIFT             3  /* MIXOUTL_SPKMIXL_VOL */
+#define WM8994_MIXOUTL_SPKMIXL_VOL_WIDTH             1  /* MIXOUTL_SPKMIXL_VOL */
+#define WM8994_DAC1L_SPKMIXL_VOL                0x0004  /* DAC1L_SPKMIXL_VOL */
+#define WM8994_DAC1L_SPKMIXL_VOL_MASK           0x0004  /* DAC1L_SPKMIXL_VOL */
+#define WM8994_DAC1L_SPKMIXL_VOL_SHIFT               2  /* DAC1L_SPKMIXL_VOL */
+#define WM8994_DAC1L_SPKMIXL_VOL_WIDTH               1  /* DAC1L_SPKMIXL_VOL */
+#define WM8994_SPKMIXL_VOL_MASK                 0x0003  /* SPKMIXL_VOL - [1:0] */
+#define WM8994_SPKMIXL_VOL_SHIFT                     0  /* SPKMIXL_VOL - [1:0] */
+#define WM8994_SPKMIXL_VOL_WIDTH                     2  /* SPKMIXL_VOL - [1:0] */
+
+/*
+ * R35 (0x23) - SPKMIXR Attenuation
+ */
+#define WM8994_SPKOUT_CLASSAB                   0x0100  /* SPKOUT_CLASSAB */
+#define WM8994_SPKOUT_CLASSAB_MASK              0x0100  /* SPKOUT_CLASSAB */
+#define WM8994_SPKOUT_CLASSAB_SHIFT                  8  /* SPKOUT_CLASSAB */
+#define WM8994_SPKOUT_CLASSAB_WIDTH                  1  /* SPKOUT_CLASSAB */
+#define WM8994_DAC2R_SPKMIXR_VOL                0x0040  /* DAC2R_SPKMIXR_VOL */
+#define WM8994_DAC2R_SPKMIXR_VOL_MASK           0x0040  /* DAC2R_SPKMIXR_VOL */
+#define WM8994_DAC2R_SPKMIXR_VOL_SHIFT               6  /* DAC2R_SPKMIXR_VOL */
+#define WM8994_DAC2R_SPKMIXR_VOL_WIDTH               1  /* DAC2R_SPKMIXR_VOL */
+#define WM8994_MIXINR_SPKMIXR_VOL               0x0020  /* MIXINR_SPKMIXR_VOL */
+#define WM8994_MIXINR_SPKMIXR_VOL_MASK          0x0020  /* MIXINR_SPKMIXR_VOL */
+#define WM8994_MIXINR_SPKMIXR_VOL_SHIFT              5  /* MIXINR_SPKMIXR_VOL */
+#define WM8994_MIXINR_SPKMIXR_VOL_WIDTH              1  /* MIXINR_SPKMIXR_VOL */
+#define WM8994_IN1RP_SPKMIXR_VOL                0x0010  /* IN1RP_SPKMIXR_VOL */
+#define WM8994_IN1RP_SPKMIXR_VOL_MASK           0x0010  /* IN1RP_SPKMIXR_VOL */
+#define WM8994_IN1RP_SPKMIXR_VOL_SHIFT               4  /* IN1RP_SPKMIXR_VOL */
+#define WM8994_IN1RP_SPKMIXR_VOL_WIDTH               1  /* IN1RP_SPKMIXR_VOL */
+#define WM8994_MIXOUTR_SPKMIXR_VOL              0x0008  /* MIXOUTR_SPKMIXR_VOL */
+#define WM8994_MIXOUTR_SPKMIXR_VOL_MASK         0x0008  /* MIXOUTR_SPKMIXR_VOL */
+#define WM8994_MIXOUTR_SPKMIXR_VOL_SHIFT             3  /* MIXOUTR_SPKMIXR_VOL */
+#define WM8994_MIXOUTR_SPKMIXR_VOL_WIDTH             1  /* MIXOUTR_SPKMIXR_VOL */
+#define WM8994_DAC1R_SPKMIXR_VOL                0x0004  /* DAC1R_SPKMIXR_VOL */
+#define WM8994_DAC1R_SPKMIXR_VOL_MASK           0x0004  /* DAC1R_SPKMIXR_VOL */
+#define WM8994_DAC1R_SPKMIXR_VOL_SHIFT               2  /* DAC1R_SPKMIXR_VOL */
+#define WM8994_DAC1R_SPKMIXR_VOL_WIDTH               1  /* DAC1R_SPKMIXR_VOL */
+#define WM8994_SPKMIXR_VOL_MASK                 0x0003  /* SPKMIXR_VOL - [1:0] */
+#define WM8994_SPKMIXR_VOL_SHIFT                     0  /* SPKMIXR_VOL - [1:0] */
+#define WM8994_SPKMIXR_VOL_WIDTH                     2  /* SPKMIXR_VOL - [1:0] */
+
+/*
+ * R36 (0x24) - SPKOUT Mixers
+ */
+#define WM8994_IN2LRP_TO_SPKOUTL                0x0020  /* IN2LRP_TO_SPKOUTL */
+#define WM8994_IN2LRP_TO_SPKOUTL_MASK           0x0020  /* IN2LRP_TO_SPKOUTL */
+#define WM8994_IN2LRP_TO_SPKOUTL_SHIFT               5  /* IN2LRP_TO_SPKOUTL */
+#define WM8994_IN2LRP_TO_SPKOUTL_WIDTH               1  /* IN2LRP_TO_SPKOUTL */
+#define WM8994_SPKMIXL_TO_SPKOUTL               0x0010  /* SPKMIXL_TO_SPKOUTL */
+#define WM8994_SPKMIXL_TO_SPKOUTL_MASK          0x0010  /* SPKMIXL_TO_SPKOUTL */
+#define WM8994_SPKMIXL_TO_SPKOUTL_SHIFT              4  /* SPKMIXL_TO_SPKOUTL */
+#define WM8994_SPKMIXL_TO_SPKOUTL_WIDTH              1  /* SPKMIXL_TO_SPKOUTL */
+#define WM8994_SPKMIXR_TO_SPKOUTL               0x0008  /* SPKMIXR_TO_SPKOUTL */
+#define WM8994_SPKMIXR_TO_SPKOUTL_MASK          0x0008  /* SPKMIXR_TO_SPKOUTL */
+#define WM8994_SPKMIXR_TO_SPKOUTL_SHIFT              3  /* SPKMIXR_TO_SPKOUTL */
+#define WM8994_SPKMIXR_TO_SPKOUTL_WIDTH              1  /* SPKMIXR_TO_SPKOUTL */
+#define WM8994_IN2LRP_TO_SPKOUTR                0x0004  /* IN2LRP_TO_SPKOUTR */
+#define WM8994_IN2LRP_TO_SPKOUTR_MASK           0x0004  /* IN2LRP_TO_SPKOUTR */
+#define WM8994_IN2LRP_TO_SPKOUTR_SHIFT               2  /* IN2LRP_TO_SPKOUTR */
+#define WM8994_IN2LRP_TO_SPKOUTR_WIDTH               1  /* IN2LRP_TO_SPKOUTR */
+#define WM8994_SPKMIXL_TO_SPKOUTR               0x0002  /* SPKMIXL_TO_SPKOUTR */
+#define WM8994_SPKMIXL_TO_SPKOUTR_MASK          0x0002  /* SPKMIXL_TO_SPKOUTR */
+#define WM8994_SPKMIXL_TO_SPKOUTR_SHIFT              1  /* SPKMIXL_TO_SPKOUTR */
+#define WM8994_SPKMIXL_TO_SPKOUTR_WIDTH              1  /* SPKMIXL_TO_SPKOUTR */
+#define WM8994_SPKMIXR_TO_SPKOUTR               0x0001  /* SPKMIXR_TO_SPKOUTR */
+#define WM8994_SPKMIXR_TO_SPKOUTR_MASK          0x0001  /* SPKMIXR_TO_SPKOUTR */
+#define WM8994_SPKMIXR_TO_SPKOUTR_SHIFT              0  /* SPKMIXR_TO_SPKOUTR */
+#define WM8994_SPKMIXR_TO_SPKOUTR_WIDTH              1  /* SPKMIXR_TO_SPKOUTR */
+
+/*
+ * R37 (0x25) - ClassD
+ */
+#define WM8994_SPKOUTL_BOOST_MASK               0x0038  /* SPKOUTL_BOOST - [5:3] */
+#define WM8994_SPKOUTL_BOOST_SHIFT                   3  /* SPKOUTL_BOOST - [5:3] */
+#define WM8994_SPKOUTL_BOOST_WIDTH                   3  /* SPKOUTL_BOOST - [5:3] */
+#define WM8994_SPKOUTR_BOOST_MASK               0x0007  /* SPKOUTR_BOOST - [2:0] */
+#define WM8994_SPKOUTR_BOOST_SHIFT                   0  /* SPKOUTR_BOOST - [2:0] */
+#define WM8994_SPKOUTR_BOOST_WIDTH                   3  /* SPKOUTR_BOOST - [2:0] */
+
+/*
+ * R38 (0x26) - Speaker Volume Left
+ */
+#define WM8994_SPKOUT_VU                        0x0100  /* SPKOUT_VU */
+#define WM8994_SPKOUT_VU_MASK                   0x0100  /* SPKOUT_VU */
+#define WM8994_SPKOUT_VU_SHIFT                       8  /* SPKOUT_VU */
+#define WM8994_SPKOUT_VU_WIDTH                       1  /* SPKOUT_VU */
+#define WM8994_SPKOUTL_ZC                       0x0080  /* SPKOUTL_ZC */
+#define WM8994_SPKOUTL_ZC_MASK                  0x0080  /* SPKOUTL_ZC */
+#define WM8994_SPKOUTL_ZC_SHIFT                      7  /* SPKOUTL_ZC */
+#define WM8994_SPKOUTL_ZC_WIDTH                      1  /* SPKOUTL_ZC */
+#define WM8994_SPKOUTL_MUTE_N                   0x0040  /* SPKOUTL_MUTE_N */
+#define WM8994_SPKOUTL_MUTE_N_MASK              0x0040  /* SPKOUTL_MUTE_N */
+#define WM8994_SPKOUTL_MUTE_N_SHIFT                  6  /* SPKOUTL_MUTE_N */
+#define WM8994_SPKOUTL_MUTE_N_WIDTH                  1  /* SPKOUTL_MUTE_N */
+#define WM8994_SPKOUTL_VOL_MASK                 0x003F  /* SPKOUTL_VOL - [5:0] */
+#define WM8994_SPKOUTL_VOL_SHIFT                     0  /* SPKOUTL_VOL - [5:0] */
+#define WM8994_SPKOUTL_VOL_WIDTH                     6  /* SPKOUTL_VOL - [5:0] */
+
+/*
+ * R39 (0x27) - Speaker Volume Right
+ */
+#define WM8994_SPKOUT_VU                        0x0100  /* SPKOUT_VU */
+#define WM8994_SPKOUT_VU_MASK                   0x0100  /* SPKOUT_VU */
+#define WM8994_SPKOUT_VU_SHIFT                       8  /* SPKOUT_VU */
+#define WM8994_SPKOUT_VU_WIDTH                       1  /* SPKOUT_VU */
+#define WM8994_SPKOUTR_ZC                       0x0080  /* SPKOUTR_ZC */
+#define WM8994_SPKOUTR_ZC_MASK                  0x0080  /* SPKOUTR_ZC */
+#define WM8994_SPKOUTR_ZC_SHIFT                      7  /* SPKOUTR_ZC */
+#define WM8994_SPKOUTR_ZC_WIDTH                      1  /* SPKOUTR_ZC */
+#define WM8994_SPKOUTR_MUTE_N                   0x0040  /* SPKOUTR_MUTE_N */
+#define WM8994_SPKOUTR_MUTE_N_MASK              0x0040  /* SPKOUTR_MUTE_N */
+#define WM8994_SPKOUTR_MUTE_N_SHIFT                  6  /* SPKOUTR_MUTE_N */
+#define WM8994_SPKOUTR_MUTE_N_WIDTH                  1  /* SPKOUTR_MUTE_N */
+#define WM8994_SPKOUTR_VOL_MASK                 0x003F  /* SPKOUTR_VOL - [5:0] */
+#define WM8994_SPKOUTR_VOL_SHIFT                     0  /* SPKOUTR_VOL - [5:0] */
+#define WM8994_SPKOUTR_VOL_WIDTH                     6  /* SPKOUTR_VOL - [5:0] */
+
+/*
+ * R40 (0x28) - Input Mixer (2)
+ */
+#define WM8994_IN2LP_TO_IN2L                    0x0080  /* IN2LP_TO_IN2L */
+#define WM8994_IN2LP_TO_IN2L_MASK               0x0080  /* IN2LP_TO_IN2L */
+#define WM8994_IN2LP_TO_IN2L_SHIFT                   7  /* IN2LP_TO_IN2L */
+#define WM8994_IN2LP_TO_IN2L_WIDTH                   1  /* IN2LP_TO_IN2L */
+#define WM8994_IN2LN_TO_IN2L                    0x0040  /* IN2LN_TO_IN2L */
+#define WM8994_IN2LN_TO_IN2L_MASK               0x0040  /* IN2LN_TO_IN2L */
+#define WM8994_IN2LN_TO_IN2L_SHIFT                   6  /* IN2LN_TO_IN2L */
+#define WM8994_IN2LN_TO_IN2L_WIDTH                   1  /* IN2LN_TO_IN2L */
+#define WM8994_IN1LP_TO_IN1L                    0x0020  /* IN1LP_TO_IN1L */
+#define WM8994_IN1LP_TO_IN1L_MASK               0x0020  /* IN1LP_TO_IN1L */
+#define WM8994_IN1LP_TO_IN1L_SHIFT                   5  /* IN1LP_TO_IN1L */
+#define WM8994_IN1LP_TO_IN1L_WIDTH                   1  /* IN1LP_TO_IN1L */
+#define WM8994_IN1LN_TO_IN1L                    0x0010  /* IN1LN_TO_IN1L */
+#define WM8994_IN1LN_TO_IN1L_MASK               0x0010  /* IN1LN_TO_IN1L */
+#define WM8994_IN1LN_TO_IN1L_SHIFT                   4  /* IN1LN_TO_IN1L */
+#define WM8994_IN1LN_TO_IN1L_WIDTH                   1  /* IN1LN_TO_IN1L */
+#define WM8994_IN2RP_TO_IN2R                    0x0008  /* IN2RP_TO_IN2R */
+#define WM8994_IN2RP_TO_IN2R_MASK               0x0008  /* IN2RP_TO_IN2R */
+#define WM8994_IN2RP_TO_IN2R_SHIFT                   3  /* IN2RP_TO_IN2R */
+#define WM8994_IN2RP_TO_IN2R_WIDTH                   1  /* IN2RP_TO_IN2R */
+#define WM8994_IN2RN_TO_IN2R                    0x0004  /* IN2RN_TO_IN2R */
+#define WM8994_IN2RN_TO_IN2R_MASK               0x0004  /* IN2RN_TO_IN2R */
+#define WM8994_IN2RN_TO_IN2R_SHIFT                   2  /* IN2RN_TO_IN2R */
+#define WM8994_IN2RN_TO_IN2R_WIDTH                   1  /* IN2RN_TO_IN2R */
+#define WM8994_IN1RP_TO_IN1R                    0x0002  /* IN1RP_TO_IN1R */
+#define WM8994_IN1RP_TO_IN1R_MASK               0x0002  /* IN1RP_TO_IN1R */
+#define WM8994_IN1RP_TO_IN1R_SHIFT                   1  /* IN1RP_TO_IN1R */
+#define WM8994_IN1RP_TO_IN1R_WIDTH                   1  /* IN1RP_TO_IN1R */
+#define WM8994_IN1RN_TO_IN1R                    0x0001  /* IN1RN_TO_IN1R */
+#define WM8994_IN1RN_TO_IN1R_MASK               0x0001  /* IN1RN_TO_IN1R */
+#define WM8994_IN1RN_TO_IN1R_SHIFT                   0  /* IN1RN_TO_IN1R */
+#define WM8994_IN1RN_TO_IN1R_WIDTH                   1  /* IN1RN_TO_IN1R */
+
+/*
+ * R41 (0x29) - Input Mixer (3)
+ */
+#define WM8994_IN2L_TO_MIXINL                   0x0100  /* IN2L_TO_MIXINL */
+#define WM8994_IN2L_TO_MIXINL_MASK              0x0100  /* IN2L_TO_MIXINL */
+#define WM8994_IN2L_TO_MIXINL_SHIFT                  8  /* IN2L_TO_MIXINL */
+#define WM8994_IN2L_TO_MIXINL_WIDTH                  1  /* IN2L_TO_MIXINL */
+#define WM8994_IN2L_MIXINL_VOL                  0x0080  /* IN2L_MIXINL_VOL */
+#define WM8994_IN2L_MIXINL_VOL_MASK             0x0080  /* IN2L_MIXINL_VOL */
+#define WM8994_IN2L_MIXINL_VOL_SHIFT                 7  /* IN2L_MIXINL_VOL */
+#define WM8994_IN2L_MIXINL_VOL_WIDTH                 1  /* IN2L_MIXINL_VOL */
+#define WM8994_IN1L_TO_MIXINL                   0x0020  /* IN1L_TO_MIXINL */
+#define WM8994_IN1L_TO_MIXINL_MASK              0x0020  /* IN1L_TO_MIXINL */
+#define WM8994_IN1L_TO_MIXINL_SHIFT                  5  /* IN1L_TO_MIXINL */
+#define WM8994_IN1L_TO_MIXINL_WIDTH                  1  /* IN1L_TO_MIXINL */
+#define WM8994_IN1L_MIXINL_VOL                  0x0010  /* IN1L_MIXINL_VOL */
+#define WM8994_IN1L_MIXINL_VOL_MASK             0x0010  /* IN1L_MIXINL_VOL */
+#define WM8994_IN1L_MIXINL_VOL_SHIFT                 4  /* IN1L_MIXINL_VOL */
+#define WM8994_IN1L_MIXINL_VOL_WIDTH                 1  /* IN1L_MIXINL_VOL */
+#define WM8994_MIXOUTL_MIXINL_VOL_MASK          0x0007  /* MIXOUTL_MIXINL_VOL - [2:0] */
+#define WM8994_MIXOUTL_MIXINL_VOL_SHIFT              0  /* MIXOUTL_MIXINL_VOL - [2:0] */
+#define WM8994_MIXOUTL_MIXINL_VOL_WIDTH              3  /* MIXOUTL_MIXINL_VOL - [2:0] */
+
+/*
+ * R42 (0x2A) - Input Mixer (4)
+ */
+#define WM8994_IN2R_TO_MIXINR                   0x0100  /* IN2R_TO_MIXINR */
+#define WM8994_IN2R_TO_MIXINR_MASK              0x0100  /* IN2R_TO_MIXINR */
+#define WM8994_IN2R_TO_MIXINR_SHIFT                  8  /* IN2R_TO_MIXINR */
+#define WM8994_IN2R_TO_MIXINR_WIDTH                  1  /* IN2R_TO_MIXINR */
+#define WM8994_IN2R_MIXINR_VOL                  0x0080  /* IN2R_MIXINR_VOL */
+#define WM8994_IN2R_MIXINR_VOL_MASK             0x0080  /* IN2R_MIXINR_VOL */
+#define WM8994_IN2R_MIXINR_VOL_SHIFT                 7  /* IN2R_MIXINR_VOL */
+#define WM8994_IN2R_MIXINR_VOL_WIDTH                 1  /* IN2R_MIXINR_VOL */
+#define WM8994_IN1R_TO_MIXINR                   0x0020  /* IN1R_TO_MIXINR */
+#define WM8994_IN1R_TO_MIXINR_MASK              0x0020  /* IN1R_TO_MIXINR */
+#define WM8994_IN1R_TO_MIXINR_SHIFT                  5  /* IN1R_TO_MIXINR */
+#define WM8994_IN1R_TO_MIXINR_WIDTH                  1  /* IN1R_TO_MIXINR */
+#define WM8994_IN1R_MIXINR_VOL                  0x0010  /* IN1R_MIXINR_VOL */
+#define WM8994_IN1R_MIXINR_VOL_MASK             0x0010  /* IN1R_MIXINR_VOL */
+#define WM8994_IN1R_MIXINR_VOL_SHIFT                 4  /* IN1R_MIXINR_VOL */
+#define WM8994_IN1R_MIXINR_VOL_WIDTH                 1  /* IN1R_MIXINR_VOL */
+#define WM8994_MIXOUTR_MIXINR_VOL_MASK          0x0007  /* MIXOUTR_MIXINR_VOL - [2:0] */
+#define WM8994_MIXOUTR_MIXINR_VOL_SHIFT              0  /* MIXOUTR_MIXINR_VOL - [2:0] */
+#define WM8994_MIXOUTR_MIXINR_VOL_WIDTH              3  /* MIXOUTR_MIXINR_VOL - [2:0] */
+
+/*
+ * R43 (0x2B) - Input Mixer (5)
+ */
+#define WM8994_IN1LP_MIXINL_VOL_MASK            0x01C0  /* IN1LP_MIXINL_VOL - [8:6] */
+#define WM8994_IN1LP_MIXINL_VOL_SHIFT                6  /* IN1LP_MIXINL_VOL - [8:6] */
+#define WM8994_IN1LP_MIXINL_VOL_WIDTH                3  /* IN1LP_MIXINL_VOL - [8:6] */
+#define WM8994_IN2LRP_MIXINL_VOL_MASK           0x0007  /* IN2LRP_MIXINL_VOL - [2:0] */
+#define WM8994_IN2LRP_MIXINL_VOL_SHIFT               0  /* IN2LRP_MIXINL_VOL - [2:0] */
+#define WM8994_IN2LRP_MIXINL_VOL_WIDTH               3  /* IN2LRP_MIXINL_VOL - [2:0] */
+
+/*
+ * R44 (0x2C) - Input Mixer (6)
+ */
+#define WM8994_IN1RP_MIXINR_VOL_MASK            0x01C0  /* IN1RP_MIXINR_VOL - [8:6] */
+#define WM8994_IN1RP_MIXINR_VOL_SHIFT                6  /* IN1RP_MIXINR_VOL - [8:6] */
+#define WM8994_IN1RP_MIXINR_VOL_WIDTH                3  /* IN1RP_MIXINR_VOL - [8:6] */
+#define WM8994_IN2LRP_MIXINR_VOL_MASK           0x0007  /* IN2LRP_MIXINR_VOL - [2:0] */
+#define WM8994_IN2LRP_MIXINR_VOL_SHIFT               0  /* IN2LRP_MIXINR_VOL - [2:0] */
+#define WM8994_IN2LRP_MIXINR_VOL_WIDTH               3  /* IN2LRP_MIXINR_VOL - [2:0] */
+
+/*
+ * R45 (0x2D) - Output Mixer (1)
+ */
+#define WM8994_DAC1L_TO_HPOUT1L                 0x0100  /* DAC1L_TO_HPOUT1L */
+#define WM8994_DAC1L_TO_HPOUT1L_MASK            0x0100  /* DAC1L_TO_HPOUT1L */
+#define WM8994_DAC1L_TO_HPOUT1L_SHIFT                8  /* DAC1L_TO_HPOUT1L */
+#define WM8994_DAC1L_TO_HPOUT1L_WIDTH                1  /* DAC1L_TO_HPOUT1L */
+#define WM8994_MIXINR_TO_MIXOUTL                0x0080  /* MIXINR_TO_MIXOUTL */
+#define WM8994_MIXINR_TO_MIXOUTL_MASK           0x0080  /* MIXINR_TO_MIXOUTL */
+#define WM8994_MIXINR_TO_MIXOUTL_SHIFT               7  /* MIXINR_TO_MIXOUTL */
+#define WM8994_MIXINR_TO_MIXOUTL_WIDTH               1  /* MIXINR_TO_MIXOUTL */
+#define WM8994_MIXINL_TO_MIXOUTL                0x0040  /* MIXINL_TO_MIXOUTL */
+#define WM8994_MIXINL_TO_MIXOUTL_MASK           0x0040  /* MIXINL_TO_MIXOUTL */
+#define WM8994_MIXINL_TO_MIXOUTL_SHIFT               6  /* MIXINL_TO_MIXOUTL */
+#define WM8994_MIXINL_TO_MIXOUTL_WIDTH               1  /* MIXINL_TO_MIXOUTL */
+#define WM8994_IN2RN_TO_MIXOUTL                 0x0020  /* IN2RN_TO_MIXOUTL */
+#define WM8994_IN2RN_TO_MIXOUTL_MASK            0x0020  /* IN2RN_TO_MIXOUTL */
+#define WM8994_IN2RN_TO_MIXOUTL_SHIFT                5  /* IN2RN_TO_MIXOUTL */
+#define WM8994_IN2RN_TO_MIXOUTL_WIDTH                1  /* IN2RN_TO_MIXOUTL */
+#define WM8994_IN2LN_TO_MIXOUTL                 0x0010  /* IN2LN_TO_MIXOUTL */
+#define WM8994_IN2LN_TO_MIXOUTL_MASK            0x0010  /* IN2LN_TO_MIXOUTL */
+#define WM8994_IN2LN_TO_MIXOUTL_SHIFT                4  /* IN2LN_TO_MIXOUTL */
+#define WM8994_IN2LN_TO_MIXOUTL_WIDTH                1  /* IN2LN_TO_MIXOUTL */
+#define WM8994_IN1R_TO_MIXOUTL                  0x0008  /* IN1R_TO_MIXOUTL */
+#define WM8994_IN1R_TO_MIXOUTL_MASK             0x0008  /* IN1R_TO_MIXOUTL */
+#define WM8994_IN1R_TO_MIXOUTL_SHIFT                 3  /* IN1R_TO_MIXOUTL */
+#define WM8994_IN1R_TO_MIXOUTL_WIDTH                 1  /* IN1R_TO_MIXOUTL */
+#define WM8994_IN1L_TO_MIXOUTL                  0x0004  /* IN1L_TO_MIXOUTL */
+#define WM8994_IN1L_TO_MIXOUTL_MASK             0x0004  /* IN1L_TO_MIXOUTL */
+#define WM8994_IN1L_TO_MIXOUTL_SHIFT                 2  /* IN1L_TO_MIXOUTL */
+#define WM8994_IN1L_TO_MIXOUTL_WIDTH                 1  /* IN1L_TO_MIXOUTL */
+#define WM8994_IN2LP_TO_MIXOUTL                 0x0002  /* IN2LP_TO_MIXOUTL */
+#define WM8994_IN2LP_TO_MIXOUTL_MASK            0x0002  /* IN2LP_TO_MIXOUTL */
+#define WM8994_IN2LP_TO_MIXOUTL_SHIFT                1  /* IN2LP_TO_MIXOUTL */
+#define WM8994_IN2LP_TO_MIXOUTL_WIDTH                1  /* IN2LP_TO_MIXOUTL */
+#define WM8994_DAC1L_TO_MIXOUTL                 0x0001  /* DAC1L_TO_MIXOUTL */
+#define WM8994_DAC1L_TO_MIXOUTL_MASK            0x0001  /* DAC1L_TO_MIXOUTL */
+#define WM8994_DAC1L_TO_MIXOUTL_SHIFT                0  /* DAC1L_TO_MIXOUTL */
+#define WM8994_DAC1L_TO_MIXOUTL_WIDTH                1  /* DAC1L_TO_MIXOUTL */
+
+/*
+ * R46 (0x2E) - Output Mixer (2)
+ */
+#define WM8994_DAC1R_TO_HPOUT1R                 0x0100  /* DAC1R_TO_HPOUT1R */
+#define WM8994_DAC1R_TO_HPOUT1R_MASK            0x0100  /* DAC1R_TO_HPOUT1R */
+#define WM8994_DAC1R_TO_HPOUT1R_SHIFT                8  /* DAC1R_TO_HPOUT1R */
+#define WM8994_DAC1R_TO_HPOUT1R_WIDTH                1  /* DAC1R_TO_HPOUT1R */
+#define WM8994_MIXINL_TO_MIXOUTR                0x0080  /* MIXINL_TO_MIXOUTR */
+#define WM8994_MIXINL_TO_MIXOUTR_MASK           0x0080  /* MIXINL_TO_MIXOUTR */
+#define WM8994_MIXINL_TO_MIXOUTR_SHIFT               7  /* MIXINL_TO_MIXOUTR */
+#define WM8994_MIXINL_TO_MIXOUTR_WIDTH               1  /* MIXINL_TO_MIXOUTR */
+#define WM8994_MIXINR_TO_MIXOUTR                0x0040  /* MIXINR_TO_MIXOUTR */
+#define WM8994_MIXINR_TO_MIXOUTR_MASK           0x0040  /* MIXINR_TO_MIXOUTR */
+#define WM8994_MIXINR_TO_MIXOUTR_SHIFT               6  /* MIXINR_TO_MIXOUTR */
+#define WM8994_MIXINR_TO_MIXOUTR_WIDTH               1  /* MIXINR_TO_MIXOUTR */
+#define WM8994_IN2LN_TO_MIXOUTR                 0x0020  /* IN2LN_TO_MIXOUTR */
+#define WM8994_IN2LN_TO_MIXOUTR_MASK            0x0020  /* IN2LN_TO_MIXOUTR */
+#define WM8994_IN2LN_TO_MIXOUTR_SHIFT                5  /* IN2LN_TO_MIXOUTR */
+#define WM8994_IN2LN_TO_MIXOUTR_WIDTH                1  /* IN2LN_TO_MIXOUTR */
+#define WM8994_IN2RN_TO_MIXOUTR                 0x0010  /* IN2RN_TO_MIXOUTR */
+#define WM8994_IN2RN_TO_MIXOUTR_MASK            0x0010  /* IN2RN_TO_MIXOUTR */
+#define WM8994_IN2RN_TO_MIXOUTR_SHIFT                4  /* IN2RN_TO_MIXOUTR */
+#define WM8994_IN2RN_TO_MIXOUTR_WIDTH                1  /* IN2RN_TO_MIXOUTR */
+#define WM8994_IN1L_TO_MIXOUTR                  0x0008  /* IN1L_TO_MIXOUTR */
+#define WM8994_IN1L_TO_MIXOUTR_MASK             0x0008  /* IN1L_TO_MIXOUTR */
+#define WM8994_IN1L_TO_MIXOUTR_SHIFT                 3  /* IN1L_TO_MIXOUTR */
+#define WM8994_IN1L_TO_MIXOUTR_WIDTH                 1  /* IN1L_TO_MIXOUTR */
+#define WM8994_IN1R_TO_MIXOUTR                  0x0004  /* IN1R_TO_MIXOUTR */
+#define WM8994_IN1R_TO_MIXOUTR_MASK             0x0004  /* IN1R_TO_MIXOUTR */
+#define WM8994_IN1R_TO_MIXOUTR_SHIFT                 2  /* IN1R_TO_MIXOUTR */
+#define WM8994_IN1R_TO_MIXOUTR_WIDTH                 1  /* IN1R_TO_MIXOUTR */
+#define WM8994_IN2RP_TO_MIXOUTR                 0x0002  /* IN2RP_TO_MIXOUTR */
+#define WM8994_IN2RP_TO_MIXOUTR_MASK            0x0002  /* IN2RP_TO_MIXOUTR */
+#define WM8994_IN2RP_TO_MIXOUTR_SHIFT                1  /* IN2RP_TO_MIXOUTR */
+#define WM8994_IN2RP_TO_MIXOUTR_WIDTH                1  /* IN2RP_TO_MIXOUTR */
+#define WM8994_DAC1R_TO_MIXOUTR                 0x0001  /* DAC1R_TO_MIXOUTR */
+#define WM8994_DAC1R_TO_MIXOUTR_MASK            0x0001  /* DAC1R_TO_MIXOUTR */
+#define WM8994_DAC1R_TO_MIXOUTR_SHIFT                0  /* DAC1R_TO_MIXOUTR */
+#define WM8994_DAC1R_TO_MIXOUTR_WIDTH                1  /* DAC1R_TO_MIXOUTR */
+
+/*
+ * R47 (0x2F) - Output Mixer (3)
+ */
+#define WM8994_IN2LP_MIXOUTL_VOL_MASK           0x0E00  /* IN2LP_MIXOUTL_VOL - [11:9] */
+#define WM8994_IN2LP_MIXOUTL_VOL_SHIFT               9  /* IN2LP_MIXOUTL_VOL - [11:9] */
+#define WM8994_IN2LP_MIXOUTL_VOL_WIDTH               3  /* IN2LP_MIXOUTL_VOL - [11:9] */
+#define WM8994_IN2LN_MIXOUTL_VOL_MASK           0x01C0  /* IN2LN_MIXOUTL_VOL - [8:6] */
+#define WM8994_IN2LN_MIXOUTL_VOL_SHIFT               6  /* IN2LN_MIXOUTL_VOL - [8:6] */
+#define WM8994_IN2LN_MIXOUTL_VOL_WIDTH               3  /* IN2LN_MIXOUTL_VOL - [8:6] */
+#define WM8994_IN1R_MIXOUTL_VOL_MASK            0x0038  /* IN1R_MIXOUTL_VOL - [5:3] */
+#define WM8994_IN1R_MIXOUTL_VOL_SHIFT                3  /* IN1R_MIXOUTL_VOL - [5:3] */
+#define WM8994_IN1R_MIXOUTL_VOL_WIDTH                3  /* IN1R_MIXOUTL_VOL - [5:3] */
+#define WM8994_IN1L_MIXOUTL_VOL_MASK            0x0007  /* IN1L_MIXOUTL_VOL - [2:0] */
+#define WM8994_IN1L_MIXOUTL_VOL_SHIFT                0  /* IN1L_MIXOUTL_VOL - [2:0] */
+#define WM8994_IN1L_MIXOUTL_VOL_WIDTH                3  /* IN1L_MIXOUTL_VOL - [2:0] */
+
+/*
+ * R48 (0x30) - Output Mixer (4)
+ */
+#define WM8994_IN2RP_MIXOUTR_VOL_MASK           0x0E00  /* IN2RP_MIXOUTR_VOL - [11:9] */
+#define WM8994_IN2RP_MIXOUTR_VOL_SHIFT               9  /* IN2RP_MIXOUTR_VOL - [11:9] */
+#define WM8994_IN2RP_MIXOUTR_VOL_WIDTH               3  /* IN2RP_MIXOUTR_VOL - [11:9] */
+#define WM8994_IN2RN_MIXOUTR_VOL_MASK           0x01C0  /* IN2RN_MIXOUTR_VOL - [8:6] */
+#define WM8994_IN2RN_MIXOUTR_VOL_SHIFT               6  /* IN2RN_MIXOUTR_VOL - [8:6] */
+#define WM8994_IN2RN_MIXOUTR_VOL_WIDTH               3  /* IN2RN_MIXOUTR_VOL - [8:6] */
+#define WM8994_IN1L_MIXOUTR_VOL_MASK            0x0038  /* IN1L_MIXOUTR_VOL - [5:3] */
+#define WM8994_IN1L_MIXOUTR_VOL_SHIFT                3  /* IN1L_MIXOUTR_VOL - [5:3] */
+#define WM8994_IN1L_MIXOUTR_VOL_WIDTH                3  /* IN1L_MIXOUTR_VOL - [5:3] */
+#define WM8994_IN1R_MIXOUTR_VOL_MASK            0x0007  /* IN1R_MIXOUTR_VOL - [2:0] */
+#define WM8994_IN1R_MIXOUTR_VOL_SHIFT                0  /* IN1R_MIXOUTR_VOL - [2:0] */
+#define WM8994_IN1R_MIXOUTR_VOL_WIDTH                3  /* IN1R_MIXOUTR_VOL - [2:0] */
+
+/*
+ * R49 (0x31) - Output Mixer (5)
+ */
+#define WM8994_DAC1L_MIXOUTL_VOL_MASK           0x0E00  /* DAC1L_MIXOUTL_VOL - [11:9] */
+#define WM8994_DAC1L_MIXOUTL_VOL_SHIFT               9  /* DAC1L_MIXOUTL_VOL - [11:9] */
+#define WM8994_DAC1L_MIXOUTL_VOL_WIDTH               3  /* DAC1L_MIXOUTL_VOL - [11:9] */
+#define WM8994_IN2RN_MIXOUTL_VOL_MASK           0x01C0  /* IN2RN_MIXOUTL_VOL - [8:6] */
+#define WM8994_IN2RN_MIXOUTL_VOL_SHIFT               6  /* IN2RN_MIXOUTL_VOL - [8:6] */
+#define WM8994_IN2RN_MIXOUTL_VOL_WIDTH               3  /* IN2RN_MIXOUTL_VOL - [8:6] */
+#define WM8994_MIXINR_MIXOUTL_VOL_MASK          0x0038  /* MIXINR_MIXOUTL_VOL - [5:3] */
+#define WM8994_MIXINR_MIXOUTL_VOL_SHIFT              3  /* MIXINR_MIXOUTL_VOL - [5:3] */
+#define WM8994_MIXINR_MIXOUTL_VOL_WIDTH              3  /* MIXINR_MIXOUTL_VOL - [5:3] */
+#define WM8994_MIXINL_MIXOUTL_VOL_MASK          0x0007  /* MIXINL_MIXOUTL_VOL - [2:0] */
+#define WM8994_MIXINL_MIXOUTL_VOL_SHIFT              0  /* MIXINL_MIXOUTL_VOL - [2:0] */
+#define WM8994_MIXINL_MIXOUTL_VOL_WIDTH              3  /* MIXINL_MIXOUTL_VOL - [2:0] */
+
+/*
+ * R50 (0x32) - Output Mixer (6)
+ */
+#define WM8994_DAC1R_MIXOUTR_VOL_MASK           0x0E00  /* DAC1R_MIXOUTR_VOL - [11:9] */
+#define WM8994_DAC1R_MIXOUTR_VOL_SHIFT               9  /* DAC1R_MIXOUTR_VOL - [11:9] */
+#define WM8994_DAC1R_MIXOUTR_VOL_WIDTH               3  /* DAC1R_MIXOUTR_VOL - [11:9] */
+#define WM8994_IN2LN_MIXOUTR_VOL_MASK           0x01C0  /* IN2LN_MIXOUTR_VOL - [8:6] */
+#define WM8994_IN2LN_MIXOUTR_VOL_SHIFT               6  /* IN2LN_MIXOUTR_VOL - [8:6] */
+#define WM8994_IN2LN_MIXOUTR_VOL_WIDTH               3  /* IN2LN_MIXOUTR_VOL - [8:6] */
+#define WM8994_MIXINL_MIXOUTR_VOL_MASK          0x0038  /* MIXINL_MIXOUTR_VOL - [5:3] */
+#define WM8994_MIXINL_MIXOUTR_VOL_SHIFT              3  /* MIXINL_MIXOUTR_VOL - [5:3] */
+#define WM8994_MIXINL_MIXOUTR_VOL_WIDTH              3  /* MIXINL_MIXOUTR_VOL - [5:3] */
+#define WM8994_MIXINR_MIXOUTR_VOL_MASK          0x0007  /* MIXINR_MIXOUTR_VOL - [2:0] */
+#define WM8994_MIXINR_MIXOUTR_VOL_SHIFT              0  /* MIXINR_MIXOUTR_VOL - [2:0] */
+#define WM8994_MIXINR_MIXOUTR_VOL_WIDTH              3  /* MIXINR_MIXOUTR_VOL - [2:0] */
+
+/*
+ * R51 (0x33) - HPOUT2 Mixer
+ */
+#define WM8994_IN2LRP_TO_HPOUT2                 0x0020  /* IN2LRP_TO_HPOUT2 */
+#define WM8994_IN2LRP_TO_HPOUT2_MASK            0x0020  /* IN2LRP_TO_HPOUT2 */
+#define WM8994_IN2LRP_TO_HPOUT2_SHIFT                5  /* IN2LRP_TO_HPOUT2 */
+#define WM8994_IN2LRP_TO_HPOUT2_WIDTH                1  /* IN2LRP_TO_HPOUT2 */
+#define WM8994_MIXOUTLVOL_TO_HPOUT2             0x0010  /* MIXOUTLVOL_TO_HPOUT2 */
+#define WM8994_MIXOUTLVOL_TO_HPOUT2_MASK        0x0010  /* MIXOUTLVOL_TO_HPOUT2 */
+#define WM8994_MIXOUTLVOL_TO_HPOUT2_SHIFT            4  /* MIXOUTLVOL_TO_HPOUT2 */
+#define WM8994_MIXOUTLVOL_TO_HPOUT2_WIDTH            1  /* MIXOUTLVOL_TO_HPOUT2 */
+#define WM8994_MIXOUTRVOL_TO_HPOUT2             0x0008  /* MIXOUTRVOL_TO_HPOUT2 */
+#define WM8994_MIXOUTRVOL_TO_HPOUT2_MASK        0x0008  /* MIXOUTRVOL_TO_HPOUT2 */
+#define WM8994_MIXOUTRVOL_TO_HPOUT2_SHIFT            3  /* MIXOUTRVOL_TO_HPOUT2 */
+#define WM8994_MIXOUTRVOL_TO_HPOUT2_WIDTH            1  /* MIXOUTRVOL_TO_HPOUT2 */
+
+/*
+ * R52 (0x34) - Line Mixer (1)
+ */
+#define WM8994_MIXOUTL_TO_LINEOUT1N             0x0040  /* MIXOUTL_TO_LINEOUT1N */
+#define WM8994_MIXOUTL_TO_LINEOUT1N_MASK        0x0040  /* MIXOUTL_TO_LINEOUT1N */
+#define WM8994_MIXOUTL_TO_LINEOUT1N_SHIFT            6  /* MIXOUTL_TO_LINEOUT1N */
+#define WM8994_MIXOUTL_TO_LINEOUT1N_WIDTH            1  /* MIXOUTL_TO_LINEOUT1N */
+#define WM8994_MIXOUTR_TO_LINEOUT1N             0x0020  /* MIXOUTR_TO_LINEOUT1N */
+#define WM8994_MIXOUTR_TO_LINEOUT1N_MASK        0x0020  /* MIXOUTR_TO_LINEOUT1N */
+#define WM8994_MIXOUTR_TO_LINEOUT1N_SHIFT            5  /* MIXOUTR_TO_LINEOUT1N */
+#define WM8994_MIXOUTR_TO_LINEOUT1N_WIDTH            1  /* MIXOUTR_TO_LINEOUT1N */
+#define WM8994_LINEOUT1_MODE                    0x0010  /* LINEOUT1_MODE */
+#define WM8994_LINEOUT1_MODE_MASK               0x0010  /* LINEOUT1_MODE */
+#define WM8994_LINEOUT1_MODE_SHIFT                   4  /* LINEOUT1_MODE */
+#define WM8994_LINEOUT1_MODE_WIDTH                   1  /* LINEOUT1_MODE */
+#define WM8994_IN1R_TO_LINEOUT1P                0x0004  /* IN1R_TO_LINEOUT1P */
+#define WM8994_IN1R_TO_LINEOUT1P_MASK           0x0004  /* IN1R_TO_LINEOUT1P */
+#define WM8994_IN1R_TO_LINEOUT1P_SHIFT               2  /* IN1R_TO_LINEOUT1P */
+#define WM8994_IN1R_TO_LINEOUT1P_WIDTH               1  /* IN1R_TO_LINEOUT1P */
+#define WM8994_IN1L_TO_LINEOUT1P                0x0002  /* IN1L_TO_LINEOUT1P */
+#define WM8994_IN1L_TO_LINEOUT1P_MASK           0x0002  /* IN1L_TO_LINEOUT1P */
+#define WM8994_IN1L_TO_LINEOUT1P_SHIFT               1  /* IN1L_TO_LINEOUT1P */
+#define WM8994_IN1L_TO_LINEOUT1P_WIDTH               1  /* IN1L_TO_LINEOUT1P */
+#define WM8994_MIXOUTL_TO_LINEOUT1P             0x0001  /* MIXOUTL_TO_LINEOUT1P */
+#define WM8994_MIXOUTL_TO_LINEOUT1P_MASK        0x0001  /* MIXOUTL_TO_LINEOUT1P */
+#define WM8994_MIXOUTL_TO_LINEOUT1P_SHIFT            0  /* MIXOUTL_TO_LINEOUT1P */
+#define WM8994_MIXOUTL_TO_LINEOUT1P_WIDTH            1  /* MIXOUTL_TO_LINEOUT1P */
+
+/*
+ * R53 (0x35) - Line Mixer (2)
+ */
+#define WM8994_MIXOUTR_TO_LINEOUT2N             0x0040  /* MIXOUTR_TO_LINEOUT2N */
+#define WM8994_MIXOUTR_TO_LINEOUT2N_MASK        0x0040  /* MIXOUTR_TO_LINEOUT2N */
+#define WM8994_MIXOUTR_TO_LINEOUT2N_SHIFT            6  /* MIXOUTR_TO_LINEOUT2N */
+#define WM8994_MIXOUTR_TO_LINEOUT2N_WIDTH            1  /* MIXOUTR_TO_LINEOUT2N */
+#define WM8994_MIXOUTL_TO_LINEOUT2N             0x0020  /* MIXOUTL_TO_LINEOUT2N */
+#define WM8994_MIXOUTL_TO_LINEOUT2N_MASK        0x0020  /* MIXOUTL_TO_LINEOUT2N */
+#define WM8994_MIXOUTL_TO_LINEOUT2N_SHIFT            5  /* MIXOUTL_TO_LINEOUT2N */
+#define WM8994_MIXOUTL_TO_LINEOUT2N_WIDTH            1  /* MIXOUTL_TO_LINEOUT2N */
+#define WM8994_LINEOUT2_MODE                    0x0010  /* LINEOUT2_MODE */
+#define WM8994_LINEOUT2_MODE_MASK               0x0010  /* LINEOUT2_MODE */
+#define WM8994_LINEOUT2_MODE_SHIFT                   4  /* LINEOUT2_MODE */
+#define WM8994_LINEOUT2_MODE_WIDTH                   1  /* LINEOUT2_MODE */
+#define WM8994_IN1L_TO_LINEOUT2P                0x0004  /* IN1L_TO_LINEOUT2P */
+#define WM8994_IN1L_TO_LINEOUT2P_MASK           0x0004  /* IN1L_TO_LINEOUT2P */
+#define WM8994_IN1L_TO_LINEOUT2P_SHIFT               2  /* IN1L_TO_LINEOUT2P */
+#define WM8994_IN1L_TO_LINEOUT2P_WIDTH               1  /* IN1L_TO_LINEOUT2P */
+#define WM8994_IN1R_TO_LINEOUT2P                0x0002  /* IN1R_TO_LINEOUT2P */
+#define WM8994_IN1R_TO_LINEOUT2P_MASK           0x0002  /* IN1R_TO_LINEOUT2P */
+#define WM8994_IN1R_TO_LINEOUT2P_SHIFT               1  /* IN1R_TO_LINEOUT2P */
+#define WM8994_IN1R_TO_LINEOUT2P_WIDTH               1  /* IN1R_TO_LINEOUT2P */
+#define WM8994_MIXOUTR_TO_LINEOUT2P             0x0001  /* MIXOUTR_TO_LINEOUT2P */
+#define WM8994_MIXOUTR_TO_LINEOUT2P_MASK        0x0001  /* MIXOUTR_TO_LINEOUT2P */
+#define WM8994_MIXOUTR_TO_LINEOUT2P_SHIFT            0  /* MIXOUTR_TO_LINEOUT2P */
+#define WM8994_MIXOUTR_TO_LINEOUT2P_WIDTH            1  /* MIXOUTR_TO_LINEOUT2P */
+
+/*
+ * R54 (0x36) - Speaker Mixer
+ */
+#define WM8994_DAC2L_TO_SPKMIXL                 0x0200  /* DAC2L_TO_SPKMIXL */
+#define WM8994_DAC2L_TO_SPKMIXL_MASK            0x0200  /* DAC2L_TO_SPKMIXL */
+#define WM8994_DAC2L_TO_SPKMIXL_SHIFT                9  /* DAC2L_TO_SPKMIXL */
+#define WM8994_DAC2L_TO_SPKMIXL_WIDTH                1  /* DAC2L_TO_SPKMIXL */
+#define WM8994_DAC2R_TO_SPKMIXR                 0x0100  /* DAC2R_TO_SPKMIXR */
+#define WM8994_DAC2R_TO_SPKMIXR_MASK            0x0100  /* DAC2R_TO_SPKMIXR */
+#define WM8994_DAC2R_TO_SPKMIXR_SHIFT                8  /* DAC2R_TO_SPKMIXR */
+#define WM8994_DAC2R_TO_SPKMIXR_WIDTH                1  /* DAC2R_TO_SPKMIXR */
+#define WM8994_MIXINL_TO_SPKMIXL                0x0080  /* MIXINL_TO_SPKMIXL */
+#define WM8994_MIXINL_TO_SPKMIXL_MASK           0x0080  /* MIXINL_TO_SPKMIXL */
+#define WM8994_MIXINL_TO_SPKMIXL_SHIFT               7  /* MIXINL_TO_SPKMIXL */
+#define WM8994_MIXINL_TO_SPKMIXL_WIDTH               1  /* MIXINL_TO_SPKMIXL */
+#define WM8994_MIXINR_TO_SPKMIXR                0x0040  /* MIXINR_TO_SPKMIXR */
+#define WM8994_MIXINR_TO_SPKMIXR_MASK           0x0040  /* MIXINR_TO_SPKMIXR */
+#define WM8994_MIXINR_TO_SPKMIXR_SHIFT               6  /* MIXINR_TO_SPKMIXR */
+#define WM8994_MIXINR_TO_SPKMIXR_WIDTH               1  /* MIXINR_TO_SPKMIXR */
+#define WM8994_IN1LP_TO_SPKMIXL                 0x0020  /* IN1LP_TO_SPKMIXL */
+#define WM8994_IN1LP_TO_SPKMIXL_MASK            0x0020  /* IN1LP_TO_SPKMIXL */
+#define WM8994_IN1LP_TO_SPKMIXL_SHIFT                5  /* IN1LP_TO_SPKMIXL */
+#define WM8994_IN1LP_TO_SPKMIXL_WIDTH                1  /* IN1LP_TO_SPKMIXL */
+#define WM8994_IN1RP_TO_SPKMIXR                 0x0010  /* IN1RP_TO_SPKMIXR */
+#define WM8994_IN1RP_TO_SPKMIXR_MASK            0x0010  /* IN1RP_TO_SPKMIXR */
+#define WM8994_IN1RP_TO_SPKMIXR_SHIFT                4  /* IN1RP_TO_SPKMIXR */
+#define WM8994_IN1RP_TO_SPKMIXR_WIDTH                1  /* IN1RP_TO_SPKMIXR */
+#define WM8994_MIXOUTL_TO_SPKMIXL               0x0008  /* MIXOUTL_TO_SPKMIXL */
+#define WM8994_MIXOUTL_TO_SPKMIXL_MASK          0x0008  /* MIXOUTL_TO_SPKMIXL */
+#define WM8994_MIXOUTL_TO_SPKMIXL_SHIFT              3  /* MIXOUTL_TO_SPKMIXL */
+#define WM8994_MIXOUTL_TO_SPKMIXL_WIDTH              1  /* MIXOUTL_TO_SPKMIXL */
+#define WM8994_MIXOUTR_TO_SPKMIXR               0x0004  /* MIXOUTR_TO_SPKMIXR */
+#define WM8994_MIXOUTR_TO_SPKMIXR_MASK          0x0004  /* MIXOUTR_TO_SPKMIXR */
+#define WM8994_MIXOUTR_TO_SPKMIXR_SHIFT              2  /* MIXOUTR_TO_SPKMIXR */
+#define WM8994_MIXOUTR_TO_SPKMIXR_WIDTH              1  /* MIXOUTR_TO_SPKMIXR */
+#define WM8994_DAC1L_TO_SPKMIXL                 0x0002  /* DAC1L_TO_SPKMIXL */
+#define WM8994_DAC1L_TO_SPKMIXL_MASK            0x0002  /* DAC1L_TO_SPKMIXL */
+#define WM8994_DAC1L_TO_SPKMIXL_SHIFT                1  /* DAC1L_TO_SPKMIXL */
+#define WM8994_DAC1L_TO_SPKMIXL_WIDTH                1  /* DAC1L_TO_SPKMIXL */
+#define WM8994_DAC1R_TO_SPKMIXR                 0x0001  /* DAC1R_TO_SPKMIXR */
+#define WM8994_DAC1R_TO_SPKMIXR_MASK            0x0001  /* DAC1R_TO_SPKMIXR */
+#define WM8994_DAC1R_TO_SPKMIXR_SHIFT                0  /* DAC1R_TO_SPKMIXR */
+#define WM8994_DAC1R_TO_SPKMIXR_WIDTH                1  /* DAC1R_TO_SPKMIXR */
+
+/*
+ * R55 (0x37) - Additional Control
+ */
+#define WM8994_LINEOUT1_FB                      0x0080  /* LINEOUT1_FB */
+#define WM8994_LINEOUT1_FB_MASK                 0x0080  /* LINEOUT1_FB */
+#define WM8994_LINEOUT1_FB_SHIFT                     7  /* LINEOUT1_FB */
+#define WM8994_LINEOUT1_FB_WIDTH                     1  /* LINEOUT1_FB */
+#define WM8994_LINEOUT2_FB                      0x0040  /* LINEOUT2_FB */
+#define WM8994_LINEOUT2_FB_MASK                 0x0040  /* LINEOUT2_FB */
+#define WM8994_LINEOUT2_FB_SHIFT                     6  /* LINEOUT2_FB */
+#define WM8994_LINEOUT2_FB_WIDTH                     1  /* LINEOUT2_FB */
+#define WM8994_VROI                             0x0001  /* VROI */
+#define WM8994_VROI_MASK                        0x0001  /* VROI */
+#define WM8994_VROI_SHIFT                            0  /* VROI */
+#define WM8994_VROI_WIDTH                            1  /* VROI */
+
+/*
+ * R56 (0x38) - AntiPOP (1)
+ */
+#define WM8994_LINEOUT_VMID_BUF_ENA             0x0080  /* LINEOUT_VMID_BUF_ENA */
+#define WM8994_LINEOUT_VMID_BUF_ENA_MASK        0x0080  /* LINEOUT_VMID_BUF_ENA */
+#define WM8994_LINEOUT_VMID_BUF_ENA_SHIFT            7  /* LINEOUT_VMID_BUF_ENA */
+#define WM8994_LINEOUT_VMID_BUF_ENA_WIDTH            1  /* LINEOUT_VMID_BUF_ENA */
+#define WM8994_HPOUT2_IN_ENA                    0x0040  /* HPOUT2_IN_ENA */
+#define WM8994_HPOUT2_IN_ENA_MASK               0x0040  /* HPOUT2_IN_ENA */
+#define WM8994_HPOUT2_IN_ENA_SHIFT                   6  /* HPOUT2_IN_ENA */
+#define WM8994_HPOUT2_IN_ENA_WIDTH                   1  /* HPOUT2_IN_ENA */
+#define WM8994_LINEOUT1_DISCH                   0x0020  /* LINEOUT1_DISCH */
+#define WM8994_LINEOUT1_DISCH_MASK              0x0020  /* LINEOUT1_DISCH */
+#define WM8994_LINEOUT1_DISCH_SHIFT                  5  /* LINEOUT1_DISCH */
+#define WM8994_LINEOUT1_DISCH_WIDTH                  1  /* LINEOUT1_DISCH */
+#define WM8994_LINEOUT2_DISCH                   0x0010  /* LINEOUT2_DISCH */
+#define WM8994_LINEOUT2_DISCH_MASK              0x0010  /* LINEOUT2_DISCH */
+#define WM8994_LINEOUT2_DISCH_SHIFT                  4  /* LINEOUT2_DISCH */
+#define WM8994_LINEOUT2_DISCH_WIDTH                  1  /* LINEOUT2_DISCH */
+
+/*
+ * R57 (0x39) - AntiPOP (2)
+ */
+#define WM1811_JACKDET_MODE_MASK                0x0180  /* JACKDET_MODE - [8:7] */
+#define WM1811_JACKDET_MODE_SHIFT                    7  /* JACKDET_MODE - [8:7] */
+#define WM1811_JACKDET_MODE_WIDTH                    2  /* JACKDET_MODE - [8:7] */
+#define WM8994_MICB2_DISCH                      0x0100  /* MICB2_DISCH */
+#define WM8994_MICB2_DISCH_MASK                 0x0100  /* MICB2_DISCH */
+#define WM8994_MICB2_DISCH_SHIFT                     8  /* MICB2_DISCH */
+#define WM8994_MICB2_DISCH_WIDTH                     1  /* MICB2_DISCH */
+#define WM8994_MICB1_DISCH                      0x0080  /* MICB1_DISCH */
+#define WM8994_MICB1_DISCH_MASK                 0x0080  /* MICB1_DISCH */
+#define WM8994_MICB1_DISCH_SHIFT                     7  /* MICB1_DISCH */
+#define WM8994_MICB1_DISCH_WIDTH                     1  /* MICB1_DISCH */
+#define WM8994_VMID_RAMP_MASK                   0x0060  /* VMID_RAMP - [6:5] */
+#define WM8994_VMID_RAMP_SHIFT                       5  /* VMID_RAMP - [6:5] */
+#define WM8994_VMID_RAMP_WIDTH                       2  /* VMID_RAMP - [6:5] */
+#define WM8994_VMID_BUF_ENA                     0x0008  /* VMID_BUF_ENA */
+#define WM8994_VMID_BUF_ENA_MASK                0x0008  /* VMID_BUF_ENA */
+#define WM8994_VMID_BUF_ENA_SHIFT                    3  /* VMID_BUF_ENA */
+#define WM8994_VMID_BUF_ENA_WIDTH                    1  /* VMID_BUF_ENA */
+#define WM8994_STARTUP_BIAS_ENA                 0x0004  /* STARTUP_BIAS_ENA */
+#define WM8994_STARTUP_BIAS_ENA_MASK            0x0004  /* STARTUP_BIAS_ENA */
+#define WM8994_STARTUP_BIAS_ENA_SHIFT                2  /* STARTUP_BIAS_ENA */
+#define WM8994_STARTUP_BIAS_ENA_WIDTH                1  /* STARTUP_BIAS_ENA */
+#define WM8994_BIAS_SRC                         0x0002  /* BIAS_SRC */
+#define WM8994_BIAS_SRC_MASK                    0x0002  /* BIAS_SRC */
+#define WM8994_BIAS_SRC_SHIFT                        1  /* BIAS_SRC */
+#define WM8994_BIAS_SRC_WIDTH                        1  /* BIAS_SRC */
+#define WM8994_VMID_DISCH                       0x0001  /* VMID_DISCH */
+#define WM8994_VMID_DISCH_MASK                  0x0001  /* VMID_DISCH */
+#define WM8994_VMID_DISCH_SHIFT                      0  /* VMID_DISCH */
+#define WM8994_VMID_DISCH_WIDTH                      1  /* VMID_DISCH */
+
+/*
+ * R58 (0x3A) - MICBIAS
+ */
+#define WM8994_MICD_SCTHR_MASK                  0x00C0  /* MICD_SCTHR - [7:6] */
+#define WM8994_MICD_SCTHR_SHIFT                      6  /* MICD_SCTHR - [7:6] */
+#define WM8994_MICD_SCTHR_WIDTH                      2  /* MICD_SCTHR - [7:6] */
+#define WM8994_MICD_THR_MASK                    0x0038  /* MICD_THR - [5:3] */
+#define WM8994_MICD_THR_SHIFT                        3  /* MICD_THR - [5:3] */
+#define WM8994_MICD_THR_WIDTH                        3  /* MICD_THR - [5:3] */
+#define WM8994_MICD_ENA                         0x0004  /* MICD_ENA */
+#define WM8994_MICD_ENA_MASK                    0x0004  /* MICD_ENA */
+#define WM8994_MICD_ENA_SHIFT                        2  /* MICD_ENA */
+#define WM8994_MICD_ENA_WIDTH                        1  /* MICD_ENA */
+#define WM8994_MICB2_LVL                        0x0002  /* MICB2_LVL */
+#define WM8994_MICB2_LVL_MASK                   0x0002  /* MICB2_LVL */
+#define WM8994_MICB2_LVL_SHIFT                       1  /* MICB2_LVL */
+#define WM8994_MICB2_LVL_WIDTH                       1  /* MICB2_LVL */
+#define WM8994_MICB1_LVL                        0x0001  /* MICB1_LVL */
+#define WM8994_MICB1_LVL_MASK                   0x0001  /* MICB1_LVL */
+#define WM8994_MICB1_LVL_SHIFT                       0  /* MICB1_LVL */
+#define WM8994_MICB1_LVL_WIDTH                       1  /* MICB1_LVL */
+
+/*
+ * R59 (0x3B) - LDO 1
+ */
+#define WM8994_LDO1_VSEL_MASK                   0x000E  /* LDO1_VSEL - [3:1] */
+#define WM8994_LDO1_VSEL_SHIFT                       1  /* LDO1_VSEL - [3:1] */
+#define WM8994_LDO1_VSEL_WIDTH                       3  /* LDO1_VSEL - [3:1] */
+#define WM8994_LDO1_DISCH                       0x0001  /* LDO1_DISCH */
+#define WM8994_LDO1_DISCH_MASK                  0x0001  /* LDO1_DISCH */
+#define WM8994_LDO1_DISCH_SHIFT                      0  /* LDO1_DISCH */
+#define WM8994_LDO1_DISCH_WIDTH                      1  /* LDO1_DISCH */
+
+/*
+ * R60 (0x3C) - LDO 2
+ */
+#define WM8994_LDO2_VSEL_MASK                   0x0006  /* LDO2_VSEL - [2:1] */
+#define WM8994_LDO2_VSEL_SHIFT                       1  /* LDO2_VSEL - [2:1] */
+#define WM8994_LDO2_VSEL_WIDTH                       2  /* LDO2_VSEL - [2:1] */
+#define WM8994_LDO2_DISCH                       0x0001  /* LDO2_DISCH */
+#define WM8994_LDO2_DISCH_MASK                  0x0001  /* LDO2_DISCH */
+#define WM8994_LDO2_DISCH_SHIFT                      0  /* LDO2_DISCH */
+#define WM8994_LDO2_DISCH_WIDTH                      1  /* LDO2_DISCH */
+
+/*
+ * R61 (0x3D) - MICBIAS1
+ */
+#define WM8958_MICB1_RATE                       0x0020  /* MICB1_RATE */
+#define WM8958_MICB1_RATE_MASK                  0x0020  /* MICB1_RATE */
+#define WM8958_MICB1_RATE_SHIFT                      5  /* MICB1_RATE */
+#define WM8958_MICB1_RATE_WIDTH                      1  /* MICB1_RATE */
+#define WM8958_MICB1_MODE                       0x0010  /* MICB1_MODE */
+#define WM8958_MICB1_MODE_MASK                  0x0010  /* MICB1_MODE */
+#define WM8958_MICB1_MODE_SHIFT                      4  /* MICB1_MODE */
+#define WM8958_MICB1_MODE_WIDTH                      1  /* MICB1_MODE */
+#define WM8958_MICB1_LVL_MASK                   0x000E  /* MICB1_LVL - [3:1] */
+#define WM8958_MICB1_LVL_SHIFT                       1  /* MICB1_LVL - [3:1] */
+#define WM8958_MICB1_LVL_WIDTH                       3  /* MICB1_LVL - [3:1] */
+#define WM8958_MICB1_DISCH                      0x0001  /* MICB1_DISCH */
+#define WM8958_MICB1_DISCH_MASK                 0x0001  /* MICB1_DISCH */
+#define WM8958_MICB1_DISCH_SHIFT                     0  /* MICB1_DISCH */
+#define WM8958_MICB1_DISCH_WIDTH                     1  /* MICB1_DISCH */
+
+/*
+ * R62 (0x3E) - MICBIAS2
+ */
+#define WM8958_MICB2_RATE                       0x0020  /* MICB2_RATE */
+#define WM8958_MICB2_RATE_MASK                  0x0020  /* MICB2_RATE */
+#define WM8958_MICB2_RATE_SHIFT                      5  /* MICB2_RATE */
+#define WM8958_MICB2_RATE_WIDTH                      1  /* MICB2_RATE */
+#define WM8958_MICB2_MODE                       0x0010  /* MICB2_MODE */
+#define WM8958_MICB2_MODE_MASK                  0x0010  /* MICB2_MODE */
+#define WM8958_MICB2_MODE_SHIFT                      4  /* MICB2_MODE */
+#define WM8958_MICB2_MODE_WIDTH                      1  /* MICB2_MODE */
+#define WM8958_MICB2_LVL_MASK                   0x000E  /* MICB2_LVL - [3:1] */
+#define WM8958_MICB2_LVL_SHIFT                       1  /* MICB2_LVL - [3:1] */
+#define WM8958_MICB2_LVL_WIDTH                       3  /* MICB2_LVL - [3:1] */
+#define WM8958_MICB2_DISCH                      0x0001  /* MICB2_DISCH */
+#define WM8958_MICB2_DISCH_MASK                 0x0001  /* MICB2_DISCH */
+#define WM8958_MICB2_DISCH_SHIFT                     0  /* MICB2_DISCH */
+#define WM8958_MICB2_DISCH_WIDTH                     1  /* MICB2_DISCH */
+
+/*
+ * R210 (0xD2) - Mic Detect 3
+ */
+#define WM8958_MICD_LVL_MASK                    0x07FC  /* MICD_LVL - [10:2] */
+#define WM8958_MICD_LVL_SHIFT                        2  /* MICD_LVL - [10:2] */
+#define WM8958_MICD_LVL_WIDTH                        9  /* MICD_LVL - [10:2] */
+#define WM8958_MICD_VALID                       0x0002  /* MICD_VALID */
+#define WM8958_MICD_VALID_MASK                  0x0002  /* MICD_VALID */
+#define WM8958_MICD_VALID_SHIFT                      1  /* MICD_VALID */
+#define WM8958_MICD_VALID_WIDTH                      1  /* MICD_VALID */
+#define WM8958_MICD_STS                         0x0001  /* MICD_STS */
+#define WM8958_MICD_STS_MASK                    0x0001  /* MICD_STS */
+#define WM8958_MICD_STS_SHIFT                        0  /* MICD_STS */
+#define WM8958_MICD_STS_WIDTH                        1  /* MICD_STS */
+
+/*
+ * R76 (0x4C) - Charge Pump (1)
+ */
+#define WM8994_CP_ENA                           0x8000  /* CP_ENA */
+#define WM8994_CP_ENA_MASK                      0x8000  /* CP_ENA */
+#define WM8994_CP_ENA_SHIFT                         15  /* CP_ENA */
+#define WM8994_CP_ENA_WIDTH                          1  /* CP_ENA */
+
+/*
+ * R77 (0x4D) - Charge Pump (2)
+ */
+#define WM8958_CP_DISCH                         0x8000  /* CP_DISCH */
+#define WM8958_CP_DISCH_MASK                    0x8000  /* CP_DISCH */
+#define WM8958_CP_DISCH_SHIFT                       15  /* CP_DISCH */
+#define WM8958_CP_DISCH_WIDTH                        1  /* CP_DISCH */
+
+/*
+ * R81 (0x51) - Class W (1)
+ */
+#define WM8994_CP_DYN_SRC_SEL_MASK              0x0300  /* CP_DYN_SRC_SEL - [9:8] */
+#define WM8994_CP_DYN_SRC_SEL_SHIFT                  8  /* CP_DYN_SRC_SEL - [9:8] */
+#define WM8994_CP_DYN_SRC_SEL_WIDTH                  2  /* CP_DYN_SRC_SEL - [9:8] */
+#define WM8994_CP_DYN_PWR                       0x0001  /* CP_DYN_PWR */
+#define WM8994_CP_DYN_PWR_MASK                  0x0001  /* CP_DYN_PWR */
+#define WM8994_CP_DYN_PWR_SHIFT                      0  /* CP_DYN_PWR */
+#define WM8994_CP_DYN_PWR_WIDTH                      1  /* CP_DYN_PWR */
+
+/*
+ * R84 (0x54) - DC Servo (1)
+ */
+#define WM8994_DCS_TRIG_SINGLE_1                0x2000  /* DCS_TRIG_SINGLE_1 */
+#define WM8994_DCS_TRIG_SINGLE_1_MASK           0x2000  /* DCS_TRIG_SINGLE_1 */
+#define WM8994_DCS_TRIG_SINGLE_1_SHIFT              13  /* DCS_TRIG_SINGLE_1 */
+#define WM8994_DCS_TRIG_SINGLE_1_WIDTH               1  /* DCS_TRIG_SINGLE_1 */
+#define WM8994_DCS_TRIG_SINGLE_0                0x1000  /* DCS_TRIG_SINGLE_0 */
+#define WM8994_DCS_TRIG_SINGLE_0_MASK           0x1000  /* DCS_TRIG_SINGLE_0 */
+#define WM8994_DCS_TRIG_SINGLE_0_SHIFT              12  /* DCS_TRIG_SINGLE_0 */
+#define WM8994_DCS_TRIG_SINGLE_0_WIDTH               1  /* DCS_TRIG_SINGLE_0 */
+#define WM8994_DCS_TRIG_SERIES_1                0x0200  /* DCS_TRIG_SERIES_1 */
+#define WM8994_DCS_TRIG_SERIES_1_MASK           0x0200  /* DCS_TRIG_SERIES_1 */
+#define WM8994_DCS_TRIG_SERIES_1_SHIFT               9  /* DCS_TRIG_SERIES_1 */
+#define WM8994_DCS_TRIG_SERIES_1_WIDTH               1  /* DCS_TRIG_SERIES_1 */
+#define WM8994_DCS_TRIG_SERIES_0                0x0100  /* DCS_TRIG_SERIES_0 */
+#define WM8994_DCS_TRIG_SERIES_0_MASK           0x0100  /* DCS_TRIG_SERIES_0 */
+#define WM8994_DCS_TRIG_SERIES_0_SHIFT               8  /* DCS_TRIG_SERIES_0 */
+#define WM8994_DCS_TRIG_SERIES_0_WIDTH               1  /* DCS_TRIG_SERIES_0 */
+#define WM8994_DCS_TRIG_STARTUP_1               0x0020  /* DCS_TRIG_STARTUP_1 */
+#define WM8994_DCS_TRIG_STARTUP_1_MASK          0x0020  /* DCS_TRIG_STARTUP_1 */
+#define WM8994_DCS_TRIG_STARTUP_1_SHIFT              5  /* DCS_TRIG_STARTUP_1 */
+#define WM8994_DCS_TRIG_STARTUP_1_WIDTH              1  /* DCS_TRIG_STARTUP_1 */
+#define WM8994_DCS_TRIG_STARTUP_0               0x0010  /* DCS_TRIG_STARTUP_0 */
+#define WM8994_DCS_TRIG_STARTUP_0_MASK          0x0010  /* DCS_TRIG_STARTUP_0 */
+#define WM8994_DCS_TRIG_STARTUP_0_SHIFT              4  /* DCS_TRIG_STARTUP_0 */
+#define WM8994_DCS_TRIG_STARTUP_0_WIDTH              1  /* DCS_TRIG_STARTUP_0 */
+#define WM8994_DCS_TRIG_DAC_WR_1                0x0008  /* DCS_TRIG_DAC_WR_1 */
+#define WM8994_DCS_TRIG_DAC_WR_1_MASK           0x0008  /* DCS_TRIG_DAC_WR_1 */
+#define WM8994_DCS_TRIG_DAC_WR_1_SHIFT               3  /* DCS_TRIG_DAC_WR_1 */
+#define WM8994_DCS_TRIG_DAC_WR_1_WIDTH               1  /* DCS_TRIG_DAC_WR_1 */
+#define WM8994_DCS_TRIG_DAC_WR_0                0x0004  /* DCS_TRIG_DAC_WR_0 */
+#define WM8994_DCS_TRIG_DAC_WR_0_MASK           0x0004  /* DCS_TRIG_DAC_WR_0 */
+#define WM8994_DCS_TRIG_DAC_WR_0_SHIFT               2  /* DCS_TRIG_DAC_WR_0 */
+#define WM8994_DCS_TRIG_DAC_WR_0_WIDTH               1  /* DCS_TRIG_DAC_WR_0 */
+#define WM8994_DCS_ENA_CHAN_1                   0x0002  /* DCS_ENA_CHAN_1 */
+#define WM8994_DCS_ENA_CHAN_1_MASK              0x0002  /* DCS_ENA_CHAN_1 */
+#define WM8994_DCS_ENA_CHAN_1_SHIFT                  1  /* DCS_ENA_CHAN_1 */
+#define WM8994_DCS_ENA_CHAN_1_WIDTH                  1  /* DCS_ENA_CHAN_1 */
+#define WM8994_DCS_ENA_CHAN_0                   0x0001  /* DCS_ENA_CHAN_0 */
+#define WM8994_DCS_ENA_CHAN_0_MASK              0x0001  /* DCS_ENA_CHAN_0 */
+#define WM8994_DCS_ENA_CHAN_0_SHIFT                  0  /* DCS_ENA_CHAN_0 */
+#define WM8994_DCS_ENA_CHAN_0_WIDTH                  1  /* DCS_ENA_CHAN_0 */
+
+/*
+ * R85 (0x55) - DC Servo (2)
+ */
+#define WM8994_DCS_SERIES_NO_01_MASK            0x0FE0  /* DCS_SERIES_NO_01 - [11:5] */
+#define WM8994_DCS_SERIES_NO_01_SHIFT                5  /* DCS_SERIES_NO_01 - [11:5] */
+#define WM8994_DCS_SERIES_NO_01_WIDTH                7  /* DCS_SERIES_NO_01 - [11:5] */
+#define WM8994_DCS_TIMER_PERIOD_01_MASK         0x000F  /* DCS_TIMER_PERIOD_01 - [3:0] */
+#define WM8994_DCS_TIMER_PERIOD_01_SHIFT             0  /* DCS_TIMER_PERIOD_01 - [3:0] */
+#define WM8994_DCS_TIMER_PERIOD_01_WIDTH             4  /* DCS_TIMER_PERIOD_01 - [3:0] */
+
+/*
+ * R87 (0x57) - DC Servo (4)
+ */
+#define WM8994_DCS_DAC_WR_VAL_1_MASK            0xFF00  /* DCS_DAC_WR_VAL_1 - [15:8] */
+#define WM8994_DCS_DAC_WR_VAL_1_SHIFT                8  /* DCS_DAC_WR_VAL_1 - [15:8] */
+#define WM8994_DCS_DAC_WR_VAL_1_WIDTH                8  /* DCS_DAC_WR_VAL_1 - [15:8] */
+#define WM8994_DCS_DAC_WR_VAL_0_MASK            0x00FF  /* DCS_DAC_WR_VAL_0 - [7:0] */
+#define WM8994_DCS_DAC_WR_VAL_0_SHIFT                0  /* DCS_DAC_WR_VAL_0 - [7:0] */
+#define WM8994_DCS_DAC_WR_VAL_0_WIDTH                8  /* DCS_DAC_WR_VAL_0 - [7:0] */
+
+/*
+ * R88 (0x58) - DC Servo Readback
+ */
+#define WM8994_DCS_CAL_COMPLETE_MASK            0x0300  /* DCS_CAL_COMPLETE - [9:8] */
+#define WM8994_DCS_CAL_COMPLETE_SHIFT                8  /* DCS_CAL_COMPLETE - [9:8] */
+#define WM8994_DCS_CAL_COMPLETE_WIDTH                2  /* DCS_CAL_COMPLETE - [9:8] */
+#define WM8994_DCS_DAC_WR_COMPLETE_MASK         0x0030  /* DCS_DAC_WR_COMPLETE - [5:4] */
+#define WM8994_DCS_DAC_WR_COMPLETE_SHIFT             4  /* DCS_DAC_WR_COMPLETE - [5:4] */
+#define WM8994_DCS_DAC_WR_COMPLETE_WIDTH             2  /* DCS_DAC_WR_COMPLETE - [5:4] */
+#define WM8994_DCS_STARTUP_COMPLETE_MASK        0x0003  /* DCS_STARTUP_COMPLETE - [1:0] */
+#define WM8994_DCS_STARTUP_COMPLETE_SHIFT            0  /* DCS_STARTUP_COMPLETE - [1:0] */
+#define WM8994_DCS_STARTUP_COMPLETE_WIDTH            2  /* DCS_STARTUP_COMPLETE - [1:0] */
+
+/*
+ * R96 (0x60) - Analogue HP (1)
+ */
+#define WM1811_HPOUT1_ATTN                      0x0100  /* HPOUT1_ATTN */
+#define WM1811_HPOUT1_ATTN_MASK                 0x0100  /* HPOUT1_ATTN */
+#define WM1811_HPOUT1_ATTN_SHIFT                     8  /* HPOUT1_ATTN */
+#define WM1811_HPOUT1_ATTN_WIDTH                     1  /* HPOUT1_ATTN */
+#define WM8994_HPOUT1L_RMV_SHORT                0x0080  /* HPOUT1L_RMV_SHORT */
+#define WM8994_HPOUT1L_RMV_SHORT_MASK           0x0080  /* HPOUT1L_RMV_SHORT */
+#define WM8994_HPOUT1L_RMV_SHORT_SHIFT               7  /* HPOUT1L_RMV_SHORT */
+#define WM8994_HPOUT1L_RMV_SHORT_WIDTH               1  /* HPOUT1L_RMV_SHORT */
+#define WM8994_HPOUT1L_OUTP                     0x0040  /* HPOUT1L_OUTP */
+#define WM8994_HPOUT1L_OUTP_MASK                0x0040  /* HPOUT1L_OUTP */
+#define WM8994_HPOUT1L_OUTP_SHIFT                    6  /* HPOUT1L_OUTP */
+#define WM8994_HPOUT1L_OUTP_WIDTH                    1  /* HPOUT1L_OUTP */
+#define WM8994_HPOUT1L_DLY                      0x0020  /* HPOUT1L_DLY */
+#define WM8994_HPOUT1L_DLY_MASK                 0x0020  /* HPOUT1L_DLY */
+#define WM8994_HPOUT1L_DLY_SHIFT                     5  /* HPOUT1L_DLY */
+#define WM8994_HPOUT1L_DLY_WIDTH                     1  /* HPOUT1L_DLY */
+#define WM8994_HPOUT1R_RMV_SHORT                0x0008  /* HPOUT1R_RMV_SHORT */
+#define WM8994_HPOUT1R_RMV_SHORT_MASK           0x0008  /* HPOUT1R_RMV_SHORT */
+#define WM8994_HPOUT1R_RMV_SHORT_SHIFT               3  /* HPOUT1R_RMV_SHORT */
+#define WM8994_HPOUT1R_RMV_SHORT_WIDTH               1  /* HPOUT1R_RMV_SHORT */
+#define WM8994_HPOUT1R_OUTP                     0x0004  /* HPOUT1R_OUTP */
+#define WM8994_HPOUT1R_OUTP_MASK                0x0004  /* HPOUT1R_OUTP */
+#define WM8994_HPOUT1R_OUTP_SHIFT                    2  /* HPOUT1R_OUTP */
+#define WM8994_HPOUT1R_OUTP_WIDTH                    1  /* HPOUT1R_OUTP */
+#define WM8994_HPOUT1R_DLY                      0x0002  /* HPOUT1R_DLY */
+#define WM8994_HPOUT1R_DLY_MASK                 0x0002  /* HPOUT1R_DLY */
+#define WM8994_HPOUT1R_DLY_SHIFT                     1  /* HPOUT1R_DLY */
+#define WM8994_HPOUT1R_DLY_WIDTH                     1  /* HPOUT1R_DLY */
+
+/*
+ * R208 (0xD0) - Mic Detect 1
+ */
+#define WM8958_MICD_BIAS_STARTTIME_MASK         0xF000  /* MICD_BIAS_STARTTIME - [15:12] */
+#define WM8958_MICD_BIAS_STARTTIME_SHIFT            12  /* MICD_BIAS_STARTTIME - [15:12] */
+#define WM8958_MICD_BIAS_STARTTIME_WIDTH             4  /* MICD_BIAS_STARTTIME - [15:12] */
+#define WM8958_MICD_RATE_MASK                   0x0F00  /* MICD_RATE - [11:8] */
+#define WM8958_MICD_RATE_SHIFT                       8  /* MICD_RATE - [11:8] */
+#define WM8958_MICD_RATE_WIDTH                       4  /* MICD_RATE - [11:8] */
+#define WM8958_MICD_DBTIME                      0x0002  /* MICD_DBTIME */
+#define WM8958_MICD_DBTIME_MASK                 0x0002  /* MICD_DBTIME */
+#define WM8958_MICD_DBTIME_SHIFT                     1  /* MICD_DBTIME */
+#define WM8958_MICD_DBTIME_WIDTH                     1  /* MICD_DBTIME */
+#define WM8958_MICD_ENA                         0x0001  /* MICD_ENA */
+#define WM8958_MICD_ENA_MASK                    0x0001  /* MICD_ENA */
+#define WM8958_MICD_ENA_SHIFT                        0  /* MICD_ENA */
+#define WM8958_MICD_ENA_WIDTH                        1  /* MICD_ENA */
+
+/*
+ * R209 (0xD1) - Mic Detect 2
+ */
+#define WM8958_MICD_LVL_SEL_MASK                0x00FF  /* MICD_LVL_SEL - [7:0] */
+#define WM8958_MICD_LVL_SEL_SHIFT                    0  /* MICD_LVL_SEL - [7:0] */
+#define WM8958_MICD_LVL_SEL_WIDTH                    8  /* MICD_LVL_SEL - [7:0] */
+
+/*
+ * R210 (0xD2) - Mic Detect 3
+ */
+#define WM8958_MICD_LVL_MASK                    0x07FC  /* MICD_LVL - [10:2] */
+#define WM8958_MICD_LVL_SHIFT                        2  /* MICD_LVL - [10:2] */
+#define WM8958_MICD_LVL_WIDTH                        9  /* MICD_LVL - [10:2] */
+#define WM8958_MICD_VALID                       0x0002  /* MICD_VALID */
+#define WM8958_MICD_VALID_MASK                  0x0002  /* MICD_VALID */
+#define WM8958_MICD_VALID_SHIFT                      1  /* MICD_VALID */
+#define WM8958_MICD_VALID_WIDTH                      1  /* MICD_VALID */
+#define WM8958_MICD_STS                         0x0001  /* MICD_STS */
+#define WM8958_MICD_STS_MASK                    0x0001  /* MICD_STS */
+#define WM8958_MICD_STS_SHIFT                        0  /* MICD_STS */
+#define WM8958_MICD_STS_WIDTH                        1  /* MICD_STS */
+
+/*
+ * R256 (0x100) - Chip Revision
+ */
+#define WM8994_CHIP_REV_MASK                    0x000F  /* CHIP_REV - [3:0] */
+#define WM8994_CHIP_REV_SHIFT                        0  /* CHIP_REV - [3:0] */
+#define WM8994_CHIP_REV_WIDTH                        4  /* CHIP_REV - [3:0] */
+
+/*
+ * R257 (0x101) - Control Interface
+ */
+#define WM8994_SPI_CONTRD                       0x0040  /* SPI_CONTRD */
+#define WM8994_SPI_CONTRD_MASK                  0x0040  /* SPI_CONTRD */
+#define WM8994_SPI_CONTRD_SHIFT                      6  /* SPI_CONTRD */
+#define WM8994_SPI_CONTRD_WIDTH                      1  /* SPI_CONTRD */
+#define WM8994_SPI_4WIRE                        0x0020  /* SPI_4WIRE */
+#define WM8994_SPI_4WIRE_MASK                   0x0020  /* SPI_4WIRE */
+#define WM8994_SPI_4WIRE_SHIFT                       5  /* SPI_4WIRE */
+#define WM8994_SPI_4WIRE_WIDTH                       1  /* SPI_4WIRE */
+#define WM8994_SPI_CFG                          0x0010  /* SPI_CFG */
+#define WM8994_SPI_CFG_MASK                     0x0010  /* SPI_CFG */
+#define WM8994_SPI_CFG_SHIFT                         4  /* SPI_CFG */
+#define WM8994_SPI_CFG_WIDTH                         1  /* SPI_CFG */
+#define WM8994_AUTO_INC                         0x0004  /* AUTO_INC */
+#define WM8994_AUTO_INC_MASK                    0x0004  /* AUTO_INC */
+#define WM8994_AUTO_INC_SHIFT                        2  /* AUTO_INC */
+#define WM8994_AUTO_INC_WIDTH                        1  /* AUTO_INC */
+
+/*
+ * R272 (0x110) - Write Sequencer Ctrl (1)
+ */
+#define WM8994_WSEQ_ENA                         0x8000  /* WSEQ_ENA */
+#define WM8994_WSEQ_ENA_MASK                    0x8000  /* WSEQ_ENA */
+#define WM8994_WSEQ_ENA_SHIFT                       15  /* WSEQ_ENA */
+#define WM8994_WSEQ_ENA_WIDTH                        1  /* WSEQ_ENA */
+#define WM8994_WSEQ_ABORT                       0x0200  /* WSEQ_ABORT */
+#define WM8994_WSEQ_ABORT_MASK                  0x0200  /* WSEQ_ABORT */
+#define WM8994_WSEQ_ABORT_SHIFT                      9  /* WSEQ_ABORT */
+#define WM8994_WSEQ_ABORT_WIDTH                      1  /* WSEQ_ABORT */
+#define WM8994_WSEQ_START                       0x0100  /* WSEQ_START */
+#define WM8994_WSEQ_START_MASK                  0x0100  /* WSEQ_START */
+#define WM8994_WSEQ_START_SHIFT                      8  /* WSEQ_START */
+#define WM8994_WSEQ_START_WIDTH                      1  /* WSEQ_START */
+#define WM8994_WSEQ_START_INDEX_MASK            0x007F  /* WSEQ_START_INDEX - [6:0] */
+#define WM8994_WSEQ_START_INDEX_SHIFT                0  /* WSEQ_START_INDEX - [6:0] */
+#define WM8994_WSEQ_START_INDEX_WIDTH                7  /* WSEQ_START_INDEX - [6:0] */
+
+/*
+ * R273 (0x111) - Write Sequencer Ctrl (2)
+ */
+#define WM8994_WSEQ_BUSY                        0x0100  /* WSEQ_BUSY */
+#define WM8994_WSEQ_BUSY_MASK                   0x0100  /* WSEQ_BUSY */
+#define WM8994_WSEQ_BUSY_SHIFT                       8  /* WSEQ_BUSY */
+#define WM8994_WSEQ_BUSY_WIDTH                       1  /* WSEQ_BUSY */
+#define WM8994_WSEQ_CURRENT_INDEX_MASK          0x007F  /* WSEQ_CURRENT_INDEX - [6:0] */
+#define WM8994_WSEQ_CURRENT_INDEX_SHIFT              0  /* WSEQ_CURRENT_INDEX - [6:0] */
+#define WM8994_WSEQ_CURRENT_INDEX_WIDTH              7  /* WSEQ_CURRENT_INDEX - [6:0] */
+
+/*
+ * R512 (0x200) - AIF1 Clocking (1)
+ */
+#define WM8994_AIF1CLK_SRC_MASK                 0x0018  /* AIF1CLK_SRC - [4:3] */
+#define WM8994_AIF1CLK_SRC_SHIFT                     3  /* AIF1CLK_SRC - [4:3] */
+#define WM8994_AIF1CLK_SRC_WIDTH                     2  /* AIF1CLK_SRC - [4:3] */
+#define WM8994_AIF1CLK_INV                      0x0004  /* AIF1CLK_INV */
+#define WM8994_AIF1CLK_INV_MASK                 0x0004  /* AIF1CLK_INV */
+#define WM8994_AIF1CLK_INV_SHIFT                     2  /* AIF1CLK_INV */
+#define WM8994_AIF1CLK_INV_WIDTH                     1  /* AIF1CLK_INV */
+#define WM8994_AIF1CLK_DIV                      0x0002  /* AIF1CLK_DIV */
+#define WM8994_AIF1CLK_DIV_MASK                 0x0002  /* AIF1CLK_DIV */
+#define WM8994_AIF1CLK_DIV_SHIFT                     1  /* AIF1CLK_DIV */
+#define WM8994_AIF1CLK_DIV_WIDTH                     1  /* AIF1CLK_DIV */
+#define WM8994_AIF1CLK_ENA                      0x0001  /* AIF1CLK_ENA */
+#define WM8994_AIF1CLK_ENA_MASK                 0x0001  /* AIF1CLK_ENA */
+#define WM8994_AIF1CLK_ENA_SHIFT                     0  /* AIF1CLK_ENA */
+#define WM8994_AIF1CLK_ENA_WIDTH                     1  /* AIF1CLK_ENA */
+
+/*
+ * R513 (0x201) - AIF1 Clocking (2)
+ */
+#define WM8994_AIF1DAC_DIV_MASK                 0x0038  /* AIF1DAC_DIV - [5:3] */
+#define WM8994_AIF1DAC_DIV_SHIFT                     3  /* AIF1DAC_DIV - [5:3] */
+#define WM8994_AIF1DAC_DIV_WIDTH                     3  /* AIF1DAC_DIV - [5:3] */
+#define WM8994_AIF1ADC_DIV_MASK                 0x0007  /* AIF1ADC_DIV - [2:0] */
+#define WM8994_AIF1ADC_DIV_SHIFT                     0  /* AIF1ADC_DIV - [2:0] */
+#define WM8994_AIF1ADC_DIV_WIDTH                     3  /* AIF1ADC_DIV - [2:0] */
+
+/*
+ * R516 (0x204) - AIF2 Clocking (1)
+ */
+#define WM8994_AIF2CLK_SRC_MASK                 0x0018  /* AIF2CLK_SRC - [4:3] */
+#define WM8994_AIF2CLK_SRC_SHIFT                     3  /* AIF2CLK_SRC - [4:3] */
+#define WM8994_AIF2CLK_SRC_WIDTH                     2  /* AIF2CLK_SRC - [4:3] */
+#define WM8994_AIF2CLK_INV                      0x0004  /* AIF2CLK_INV */
+#define WM8994_AIF2CLK_INV_MASK                 0x0004  /* AIF2CLK_INV */
+#define WM8994_AIF2CLK_INV_SHIFT                     2  /* AIF2CLK_INV */
+#define WM8994_AIF2CLK_INV_WIDTH                     1  /* AIF2CLK_INV */
+#define WM8994_AIF2CLK_DIV                      0x0002  /* AIF2CLK_DIV */
+#define WM8994_AIF2CLK_DIV_MASK                 0x0002  /* AIF2CLK_DIV */
+#define WM8994_AIF2CLK_DIV_SHIFT                     1  /* AIF2CLK_DIV */
+#define WM8994_AIF2CLK_DIV_WIDTH                     1  /* AIF2CLK_DIV */
+#define WM8994_AIF2CLK_ENA                      0x0001  /* AIF2CLK_ENA */
+#define WM8994_AIF2CLK_ENA_MASK                 0x0001  /* AIF2CLK_ENA */
+#define WM8994_AIF2CLK_ENA_SHIFT                     0  /* AIF2CLK_ENA */
+#define WM8994_AIF2CLK_ENA_WIDTH                     1  /* AIF2CLK_ENA */
+
+/*
+ * R517 (0x205) - AIF2 Clocking (2)
+ */
+#define WM8994_AIF2DAC_DIV_MASK                 0x0038  /* AIF2DAC_DIV - [5:3] */
+#define WM8994_AIF2DAC_DIV_SHIFT                     3  /* AIF2DAC_DIV - [5:3] */
+#define WM8994_AIF2DAC_DIV_WIDTH                     3  /* AIF2DAC_DIV - [5:3] */
+#define WM8994_AIF2ADC_DIV_MASK                 0x0007  /* AIF2ADC_DIV - [2:0] */
+#define WM8994_AIF2ADC_DIV_SHIFT                     0  /* AIF2ADC_DIV - [2:0] */
+#define WM8994_AIF2ADC_DIV_WIDTH                     3  /* AIF2ADC_DIV - [2:0] */
+
+/*
+ * R520 (0x208) - Clocking (1)
+ */
+#define WM8958_DSP2CLK_ENA                      0x4000  /* DSP2CLK_ENA */
+#define WM8958_DSP2CLK_ENA_MASK                 0x4000  /* DSP2CLK_ENA */
+#define WM8958_DSP2CLK_ENA_SHIFT                    14  /* DSP2CLK_ENA */
+#define WM8958_DSP2CLK_ENA_WIDTH                     1  /* DSP2CLK_ENA */
+#define WM8958_DSP2CLK_SRC                      0x1000  /* DSP2CLK_SRC */
+#define WM8958_DSP2CLK_SRC_MASK                 0x1000  /* DSP2CLK_SRC */
+#define WM8958_DSP2CLK_SRC_SHIFT                    12  /* DSP2CLK_SRC */
+#define WM8958_DSP2CLK_SRC_WIDTH                     1  /* DSP2CLK_SRC */
+#define WM8994_TOCLK_ENA                        0x0010  /* TOCLK_ENA */
+#define WM8994_TOCLK_ENA_MASK                   0x0010  /* TOCLK_ENA */
+#define WM8994_TOCLK_ENA_SHIFT                       4  /* TOCLK_ENA */
+#define WM8994_TOCLK_ENA_WIDTH                       1  /* TOCLK_ENA */
+#define WM8994_AIF1DSPCLK_ENA                   0x0008  /* AIF1DSPCLK_ENA */
+#define WM8994_AIF1DSPCLK_ENA_MASK              0x0008  /* AIF1DSPCLK_ENA */
+#define WM8994_AIF1DSPCLK_ENA_SHIFT                  3  /* AIF1DSPCLK_ENA */
+#define WM8994_AIF1DSPCLK_ENA_WIDTH                  1  /* AIF1DSPCLK_ENA */
+#define WM8994_AIF2DSPCLK_ENA                   0x0004  /* AIF2DSPCLK_ENA */
+#define WM8994_AIF2DSPCLK_ENA_MASK              0x0004  /* AIF2DSPCLK_ENA */
+#define WM8994_AIF2DSPCLK_ENA_SHIFT                  2  /* AIF2DSPCLK_ENA */
+#define WM8994_AIF2DSPCLK_ENA_WIDTH                  1  /* AIF2DSPCLK_ENA */
+#define WM8994_SYSDSPCLK_ENA                    0x0002  /* SYSDSPCLK_ENA */
+#define WM8994_SYSDSPCLK_ENA_MASK               0x0002  /* SYSDSPCLK_ENA */
+#define WM8994_SYSDSPCLK_ENA_SHIFT                   1  /* SYSDSPCLK_ENA */
+#define WM8994_SYSDSPCLK_ENA_WIDTH                   1  /* SYSDSPCLK_ENA */
+#define WM8994_SYSCLK_SRC                       0x0001  /* SYSCLK_SRC */
+#define WM8994_SYSCLK_SRC_MASK                  0x0001  /* SYSCLK_SRC */
+#define WM8994_SYSCLK_SRC_SHIFT                      0  /* SYSCLK_SRC */
+#define WM8994_SYSCLK_SRC_WIDTH                      1  /* SYSCLK_SRC */
+
+/*
+ * R521 (0x209) - Clocking (2)
+ */
+#define WM8994_TOCLK_DIV_MASK                   0x0700  /* TOCLK_DIV - [10:8] */
+#define WM8994_TOCLK_DIV_SHIFT                       8  /* TOCLK_DIV - [10:8] */
+#define WM8994_TOCLK_DIV_WIDTH                       3  /* TOCLK_DIV - [10:8] */
+#define WM8994_DBCLK_DIV_MASK                   0x0070  /* DBCLK_DIV - [6:4] */
+#define WM8994_DBCLK_DIV_SHIFT                       4  /* DBCLK_DIV - [6:4] */
+#define WM8994_DBCLK_DIV_WIDTH                       3  /* DBCLK_DIV - [6:4] */
+#define WM8994_OPCLK_DIV_MASK                   0x0007  /* OPCLK_DIV - [2:0] */
+#define WM8994_OPCLK_DIV_SHIFT                       0  /* OPCLK_DIV - [2:0] */
+#define WM8994_OPCLK_DIV_WIDTH                       3  /* OPCLK_DIV - [2:0] */
+
+/*
+ * R528 (0x210) - AIF1 Rate
+ */
+#define WM8994_AIF1_SR_MASK                     0x00F0  /* AIF1_SR - [7:4] */
+#define WM8994_AIF1_SR_SHIFT                         4  /* AIF1_SR - [7:4] */
+#define WM8994_AIF1_SR_WIDTH                         4  /* AIF1_SR - [7:4] */
+#define WM8994_AIF1CLK_RATE_MASK                0x000F  /* AIF1CLK_RATE - [3:0] */
+#define WM8994_AIF1CLK_RATE_SHIFT                    0  /* AIF1CLK_RATE - [3:0] */
+#define WM8994_AIF1CLK_RATE_WIDTH                    4  /* AIF1CLK_RATE - [3:0] */
+
+/*
+ * R529 (0x211) - AIF2 Rate
+ */
+#define WM8994_AIF2_SR_MASK                     0x00F0  /* AIF2_SR - [7:4] */
+#define WM8994_AIF2_SR_SHIFT                         4  /* AIF2_SR - [7:4] */
+#define WM8994_AIF2_SR_WIDTH                         4  /* AIF2_SR - [7:4] */
+#define WM8994_AIF2CLK_RATE_MASK                0x000F  /* AIF2CLK_RATE - [3:0] */
+#define WM8994_AIF2CLK_RATE_SHIFT                    0  /* AIF2CLK_RATE - [3:0] */
+#define WM8994_AIF2CLK_RATE_WIDTH                    4  /* AIF2CLK_RATE - [3:0] */
+
+/*
+ * R530 (0x212) - Rate Status
+ */
+#define WM8994_SR_ERROR_MASK                    0x000F  /* SR_ERROR - [3:0] */
+#define WM8994_SR_ERROR_SHIFT                        0  /* SR_ERROR - [3:0] */
+#define WM8994_SR_ERROR_WIDTH                        4  /* SR_ERROR - [3:0] */
+
+/*
+ * R544 (0x220) - FLL1 Control (1)
+ */
+#define WM8994_FLL1_FRAC                        0x0004  /* FLL1_FRAC */
+#define WM8994_FLL1_FRAC_MASK                   0x0004  /* FLL1_FRAC */
+#define WM8994_FLL1_FRAC_SHIFT                       2  /* FLL1_FRAC */
+#define WM8994_FLL1_FRAC_WIDTH                       1  /* FLL1_FRAC */
+#define WM8994_FLL1_OSC_ENA                     0x0002  /* FLL1_OSC_ENA */
+#define WM8994_FLL1_OSC_ENA_MASK                0x0002  /* FLL1_OSC_ENA */
+#define WM8994_FLL1_OSC_ENA_SHIFT                    1  /* FLL1_OSC_ENA */
+#define WM8994_FLL1_OSC_ENA_WIDTH                    1  /* FLL1_OSC_ENA */
+#define WM8994_FLL1_ENA                         0x0001  /* FLL1_ENA */
+#define WM8994_FLL1_ENA_MASK                    0x0001  /* FLL1_ENA */
+#define WM8994_FLL1_ENA_SHIFT                        0  /* FLL1_ENA */
+#define WM8994_FLL1_ENA_WIDTH                        1  /* FLL1_ENA */
+
+/*
+ * R545 (0x221) - FLL1 Control (2)
+ */
+#define WM8994_FLL1_OUTDIV_MASK                 0x3F00  /* FLL1_OUTDIV - [13:8] */
+#define WM8994_FLL1_OUTDIV_SHIFT                     8  /* FLL1_OUTDIV - [13:8] */
+#define WM8994_FLL1_OUTDIV_WIDTH                     6  /* FLL1_OUTDIV - [13:8] */
+#define WM8994_FLL1_CTRL_RATE_MASK              0x0070  /* FLL1_CTRL_RATE - [6:4] */
+#define WM8994_FLL1_CTRL_RATE_SHIFT                  4  /* FLL1_CTRL_RATE - [6:4] */
+#define WM8994_FLL1_CTRL_RATE_WIDTH                  3  /* FLL1_CTRL_RATE - [6:4] */
+#define WM8994_FLL1_FRATIO_MASK                 0x0007  /* FLL1_FRATIO - [2:0] */
+#define WM8994_FLL1_FRATIO_SHIFT                     0  /* FLL1_FRATIO - [2:0] */
+#define WM8994_FLL1_FRATIO_WIDTH                     3  /* FLL1_FRATIO - [2:0] */
+
+/*
+ * R546 (0x222) - FLL1 Control (3)
+ */
+#define WM8994_FLL1_K_MASK                      0xFFFF  /* FLL1_K - [15:0] */
+#define WM8994_FLL1_K_SHIFT                          0  /* FLL1_K - [15:0] */
+#define WM8994_FLL1_K_WIDTH                         16  /* FLL1_K - [15:0] */
+
+/*
+ * R547 (0x223) - FLL1 Control (4)
+ */
+#define WM8994_FLL1_N_MASK                      0x7FE0  /* FLL1_N - [14:5] */
+#define WM8994_FLL1_N_SHIFT                          5  /* FLL1_N - [14:5] */
+#define WM8994_FLL1_N_WIDTH                         10  /* FLL1_N - [14:5] */
+#define WM8994_FLL1_LOOP_GAIN_MASK              0x000F  /* FLL1_LOOP_GAIN - [3:0] */
+#define WM8994_FLL1_LOOP_GAIN_SHIFT                  0  /* FLL1_LOOP_GAIN - [3:0] */
+#define WM8994_FLL1_LOOP_GAIN_WIDTH                  4  /* FLL1_LOOP_GAIN - [3:0] */
+
+/*
+ * R548 (0x224) - FLL1 Control (5)
+ */
+#define WM8958_FLL1_BYP                         0x8000  /* FLL1_BYP */
+#define WM8958_FLL1_BYP_MASK                    0x8000  /* FLL1_BYP */
+#define WM8958_FLL1_BYP_SHIFT                       15  /* FLL1_BYP */
+#define WM8958_FLL1_BYP_WIDTH                        1  /* FLL1_BYP */
+#define WM8994_FLL1_FRC_NCO_VAL_MASK            0x1F80  /* FLL1_FRC_NCO_VAL - [12:7] */
+#define WM8994_FLL1_FRC_NCO_VAL_SHIFT                7  /* FLL1_FRC_NCO_VAL - [12:7] */
+#define WM8994_FLL1_FRC_NCO_VAL_WIDTH                6  /* FLL1_FRC_NCO_VAL - [12:7] */
+#define WM8994_FLL1_FRC_NCO                     0x0040  /* FLL1_FRC_NCO */
+#define WM8994_FLL1_FRC_NCO_MASK                0x0040  /* FLL1_FRC_NCO */
+#define WM8994_FLL1_FRC_NCO_SHIFT                    6  /* FLL1_FRC_NCO */
+#define WM8994_FLL1_FRC_NCO_WIDTH                    1  /* FLL1_FRC_NCO */
+#define WM8994_FLL1_REFCLK_DIV_MASK             0x0018  /* FLL1_REFCLK_DIV - [4:3] */
+#define WM8994_FLL1_REFCLK_DIV_SHIFT                 3  /* FLL1_REFCLK_DIV - [4:3] */
+#define WM8994_FLL1_REFCLK_DIV_WIDTH                 2  /* FLL1_REFCLK_DIV - [4:3] */
+#define WM8994_FLL1_REFCLK_SRC_MASK             0x0003  /* FLL1_REFCLK_SRC - [1:0] */
+#define WM8994_FLL1_REFCLK_SRC_SHIFT                 0  /* FLL1_REFCLK_SRC - [1:0] */
+#define WM8994_FLL1_REFCLK_SRC_WIDTH                 2  /* FLL1_REFCLK_SRC - [1:0] */
+
+/*
+ * R550 (0x226) - FLL1 EFS 1
+ */
+#define WM8958_FLL1_LAMBDA_MASK                 0xFFFF  /* FLL1_LAMBDA - [15:0] */
+#define WM8958_FLL1_LAMBDA_SHIFT                     0  /* FLL1_LAMBDA - [15:0] */
+#define WM8958_FLL1_LAMBDA_WIDTH                    16  /* FLL1_LAMBDA - [15:0] */
+
+/*
+ * R551 (0x227) - FLL1 EFS 2
+ */
+#define WM8958_FLL1_LFSR_SEL_MASK               0x0006  /* FLL1_LFSR_SEL - [2:1] */
+#define WM8958_FLL1_LFSR_SEL_SHIFT                   1  /* FLL1_LFSR_SEL - [2:1] */
+#define WM8958_FLL1_LFSR_SEL_WIDTH                   2  /* FLL1_LFSR_SEL - [2:1] */
+#define WM8958_FLL1_EFS_ENA                     0x0001  /* FLL1_EFS_ENA */
+#define WM8958_FLL1_EFS_ENA_MASK                0x0001  /* FLL1_EFS_ENA */
+#define WM8958_FLL1_EFS_ENA_SHIFT                    0  /* FLL1_EFS_ENA */
+#define WM8958_FLL1_EFS_ENA_WIDTH                    1  /* FLL1_EFS_ENA */
+
+/*
+ * R576 (0x240) - FLL2 Control (1)
+ */
+#define WM8994_FLL2_FRAC                        0x0004  /* FLL2_FRAC */
+#define WM8994_FLL2_FRAC_MASK                   0x0004  /* FLL2_FRAC */
+#define WM8994_FLL2_FRAC_SHIFT                       2  /* FLL2_FRAC */
+#define WM8994_FLL2_FRAC_WIDTH                       1  /* FLL2_FRAC */
+#define WM8994_FLL2_OSC_ENA                     0x0002  /* FLL2_OSC_ENA */
+#define WM8994_FLL2_OSC_ENA_MASK                0x0002  /* FLL2_OSC_ENA */
+#define WM8994_FLL2_OSC_ENA_SHIFT                    1  /* FLL2_OSC_ENA */
+#define WM8994_FLL2_OSC_ENA_WIDTH                    1  /* FLL2_OSC_ENA */
+#define WM8994_FLL2_ENA                         0x0001  /* FLL2_ENA */
+#define WM8994_FLL2_ENA_MASK                    0x0001  /* FLL2_ENA */
+#define WM8994_FLL2_ENA_SHIFT                        0  /* FLL2_ENA */
+#define WM8994_FLL2_ENA_WIDTH                        1  /* FLL2_ENA */
+
+/*
+ * R577 (0x241) - FLL2 Control (2)
+ */
+#define WM8994_FLL2_OUTDIV_MASK                 0x3F00  /* FLL2_OUTDIV - [13:8] */
+#define WM8994_FLL2_OUTDIV_SHIFT                     8  /* FLL2_OUTDIV - [13:8] */
+#define WM8994_FLL2_OUTDIV_WIDTH                     6  /* FLL2_OUTDIV - [13:8] */
+#define WM8994_FLL2_CTRL_RATE_MASK              0x0070  /* FLL2_CTRL_RATE - [6:4] */
+#define WM8994_FLL2_CTRL_RATE_SHIFT                  4  /* FLL2_CTRL_RATE - [6:4] */
+#define WM8994_FLL2_CTRL_RATE_WIDTH                  3  /* FLL2_CTRL_RATE - [6:4] */
+#define WM8994_FLL2_FRATIO_MASK                 0x0007  /* FLL2_FRATIO - [2:0] */
+#define WM8994_FLL2_FRATIO_SHIFT                     0  /* FLL2_FRATIO - [2:0] */
+#define WM8994_FLL2_FRATIO_WIDTH                     3  /* FLL2_FRATIO - [2:0] */
+
+/*
+ * R578 (0x242) - FLL2 Control (3)
+ */
+#define WM8994_FLL2_K_MASK                      0xFFFF  /* FLL2_K - [15:0] */
+#define WM8994_FLL2_K_SHIFT                          0  /* FLL2_K - [15:0] */
+#define WM8994_FLL2_K_WIDTH                         16  /* FLL2_K - [15:0] */
+
+/*
+ * R579 (0x243) - FLL2 Control (4)
+ */
+#define WM8994_FLL2_N_MASK                      0x7FE0  /* FLL2_N - [14:5] */
+#define WM8994_FLL2_N_SHIFT                          5  /* FLL2_N - [14:5] */
+#define WM8994_FLL2_N_WIDTH                         10  /* FLL2_N - [14:5] */
+#define WM8994_FLL2_LOOP_GAIN_MASK              0x000F  /* FLL2_LOOP_GAIN - [3:0] */
+#define WM8994_FLL2_LOOP_GAIN_SHIFT                  0  /* FLL2_LOOP_GAIN - [3:0] */
+#define WM8994_FLL2_LOOP_GAIN_WIDTH                  4  /* FLL2_LOOP_GAIN - [3:0] */
+
+/*
+ * R580 (0x244) - FLL2 Control (5)
+ */
+#define WM8958_FLL2_BYP                         0x8000  /* FLL2_BYP */
+#define WM8958_FLL2_BYP_MASK                    0x8000  /* FLL2_BYP */
+#define WM8958_FLL2_BYP_SHIFT                       15  /* FLL2_BYP */
+#define WM8958_FLL2_BYP_WIDTH                        1  /* FLL2_BYP */
+#define WM8994_FLL2_FRC_NCO_VAL_MASK            0x1F80  /* FLL2_FRC_NCO_VAL - [12:7] */
+#define WM8994_FLL2_FRC_NCO_VAL_SHIFT                7  /* FLL2_FRC_NCO_VAL - [12:7] */
+#define WM8994_FLL2_FRC_NCO_VAL_WIDTH                6  /* FLL2_FRC_NCO_VAL - [12:7] */
+#define WM8994_FLL2_FRC_NCO                     0x0040  /* FLL2_FRC_NCO */
+#define WM8994_FLL2_FRC_NCO_MASK                0x0040  /* FLL2_FRC_NCO */
+#define WM8994_FLL2_FRC_NCO_SHIFT                    6  /* FLL2_FRC_NCO */
+#define WM8994_FLL2_FRC_NCO_WIDTH                    1  /* FLL2_FRC_NCO */
+#define WM8994_FLL2_REFCLK_DIV_MASK             0x0018  /* FLL2_REFCLK_DIV - [4:3] */
+#define WM8994_FLL2_REFCLK_DIV_SHIFT                 3  /* FLL2_REFCLK_DIV - [4:3] */
+#define WM8994_FLL2_REFCLK_DIV_WIDTH                 2  /* FLL2_REFCLK_DIV - [4:3] */
+#define WM8994_FLL2_REFCLK_SRC_MASK             0x0003  /* FLL2_REFCLK_SRC - [1:0] */
+#define WM8994_FLL2_REFCLK_SRC_SHIFT                 0  /* FLL2_REFCLK_SRC - [1:0] */
+#define WM8994_FLL2_REFCLK_SRC_WIDTH                 2  /* FLL2_REFCLK_SRC - [1:0] */
+
+/*
+ * R582 (0x246) - FLL2 EFS 1
+ */
+#define WM8958_FLL2_LAMBDA_MASK                 0xFFFF  /* FLL2_LAMBDA - [15:0] */
+#define WM8958_FLL2_LAMBDA_SHIFT                     0  /* FLL2_LAMBDA - [15:0] */
+#define WM8958_FLL2_LAMBDA_WIDTH                    16  /* FLL2_LAMBDA - [15:0] */
+
+/*
+ * R583 (0x247) - FLL2 EFS 2
+ */
+#define WM8958_FLL2_LFSR_SEL_MASK               0x0006  /* FLL2_LFSR_SEL - [2:1] */
+#define WM8958_FLL2_LFSR_SEL_SHIFT                   1  /* FLL2_LFSR_SEL - [2:1] */
+#define WM8958_FLL2_LFSR_SEL_WIDTH                   2  /* FLL2_LFSR_SEL - [2:1] */
+#define WM8958_FLL2_EFS_ENA                     0x0001  /* FLL2_EFS_ENA */
+#define WM8958_FLL2_EFS_ENA_MASK                0x0001  /* FLL2_EFS_ENA */
+#define WM8958_FLL2_EFS_ENA_SHIFT                    0  /* FLL2_EFS_ENA */
+#define WM8958_FLL2_EFS_ENA_WIDTH                    1  /* FLL2_EFS_ENA */
+
+/*
+ * R768 (0x300) - AIF1 Control (1)
+ */
+#define WM8994_AIF1ADCL_SRC                     0x8000  /* AIF1ADCL_SRC */
+#define WM8994_AIF1ADCL_SRC_MASK                0x8000  /* AIF1ADCL_SRC */
+#define WM8994_AIF1ADCL_SRC_SHIFT                   15  /* AIF1ADCL_SRC */
+#define WM8994_AIF1ADCL_SRC_WIDTH                    1  /* AIF1ADCL_SRC */
+#define WM8994_AIF1ADCR_SRC                     0x4000  /* AIF1ADCR_SRC */
+#define WM8994_AIF1ADCR_SRC_MASK                0x4000  /* AIF1ADCR_SRC */
+#define WM8994_AIF1ADCR_SRC_SHIFT                   14  /* AIF1ADCR_SRC */
+#define WM8994_AIF1ADCR_SRC_WIDTH                    1  /* AIF1ADCR_SRC */
+#define WM8994_AIF1ADC_TDM                      0x2000  /* AIF1ADC_TDM */
+#define WM8994_AIF1ADC_TDM_MASK                 0x2000  /* AIF1ADC_TDM */
+#define WM8994_AIF1ADC_TDM_SHIFT                    13  /* AIF1ADC_TDM */
+#define WM8994_AIF1ADC_TDM_WIDTH                     1  /* AIF1ADC_TDM */
+#define WM8994_AIF1_BCLK_INV                    0x0100  /* AIF1_BCLK_INV */
+#define WM8994_AIF1_BCLK_INV_MASK               0x0100  /* AIF1_BCLK_INV */
+#define WM8994_AIF1_BCLK_INV_SHIFT                   8  /* AIF1_BCLK_INV */
+#define WM8994_AIF1_BCLK_INV_WIDTH                   1  /* AIF1_BCLK_INV */
+#define WM8994_AIF1_LRCLK_INV                   0x0080  /* AIF1_LRCLK_INV */
+#define WM8994_AIF1_LRCLK_INV_MASK              0x0080  /* AIF1_LRCLK_INV */
+#define WM8994_AIF1_LRCLK_INV_SHIFT                  7  /* AIF1_LRCLK_INV */
+#define WM8994_AIF1_LRCLK_INV_WIDTH                  1  /* AIF1_LRCLK_INV */
+#define WM8994_AIF1_WL_MASK                     0x0060  /* AIF1_WL - [6:5] */
+#define WM8994_AIF1_WL_SHIFT                         5  /* AIF1_WL - [6:5] */
+#define WM8994_AIF1_WL_WIDTH                         2  /* AIF1_WL - [6:5] */
+#define WM8994_AIF1_FMT_MASK                    0x0018  /* AIF1_FMT - [4:3] */
+#define WM8994_AIF1_FMT_SHIFT                        3  /* AIF1_FMT - [4:3] */
+#define WM8994_AIF1_FMT_WIDTH                        2  /* AIF1_FMT - [4:3] */
+
+/*
+ * R769 (0x301) - AIF1 Control (2)
+ */
+#define WM8994_AIF1DACL_SRC                     0x8000  /* AIF1DACL_SRC */
+#define WM8994_AIF1DACL_SRC_MASK                0x8000  /* AIF1DACL_SRC */
+#define WM8994_AIF1DACL_SRC_SHIFT                   15  /* AIF1DACL_SRC */
+#define WM8994_AIF1DACL_SRC_WIDTH                    1  /* AIF1DACL_SRC */
+#define WM8994_AIF1DACR_SRC                     0x4000  /* AIF1DACR_SRC */
+#define WM8994_AIF1DACR_SRC_MASK                0x4000  /* AIF1DACR_SRC */
+#define WM8994_AIF1DACR_SRC_SHIFT                   14  /* AIF1DACR_SRC */
+#define WM8994_AIF1DACR_SRC_WIDTH                    1  /* AIF1DACR_SRC */
+#define WM8994_AIF1DAC_BOOST_MASK               0x0C00  /* AIF1DAC_BOOST - [11:10] */
+#define WM8994_AIF1DAC_BOOST_SHIFT                  10  /* AIF1DAC_BOOST - [11:10] */
+#define WM8994_AIF1DAC_BOOST_WIDTH                   2  /* AIF1DAC_BOOST - [11:10] */
+#define WM8994_AIF1_MONO                        0x0100  /* AIF1_MONO */
+#define WM8994_AIF1_MONO_MASK                   0x0100  /* AIF1_MONO */
+#define WM8994_AIF1_MONO_SHIFT                       8  /* AIF1_MONO */
+#define WM8994_AIF1_MONO_WIDTH                       1  /* AIF1_MONO */
+#define WM8994_AIF1DAC_COMP                     0x0010  /* AIF1DAC_COMP */
+#define WM8994_AIF1DAC_COMP_MASK                0x0010  /* AIF1DAC_COMP */
+#define WM8994_AIF1DAC_COMP_SHIFT                    4  /* AIF1DAC_COMP */
+#define WM8994_AIF1DAC_COMP_WIDTH                    1  /* AIF1DAC_COMP */
+#define WM8994_AIF1DAC_COMPMODE                 0x0008  /* AIF1DAC_COMPMODE */
+#define WM8994_AIF1DAC_COMPMODE_MASK            0x0008  /* AIF1DAC_COMPMODE */
+#define WM8994_AIF1DAC_COMPMODE_SHIFT                3  /* AIF1DAC_COMPMODE */
+#define WM8994_AIF1DAC_COMPMODE_WIDTH                1  /* AIF1DAC_COMPMODE */
+#define WM8994_AIF1ADC_COMP                     0x0004  /* AIF1ADC_COMP */
+#define WM8994_AIF1ADC_COMP_MASK                0x0004  /* AIF1ADC_COMP */
+#define WM8994_AIF1ADC_COMP_SHIFT                    2  /* AIF1ADC_COMP */
+#define WM8994_AIF1ADC_COMP_WIDTH                    1  /* AIF1ADC_COMP */
+#define WM8994_AIF1ADC_COMPMODE                 0x0002  /* AIF1ADC_COMPMODE */
+#define WM8994_AIF1ADC_COMPMODE_MASK            0x0002  /* AIF1ADC_COMPMODE */
+#define WM8994_AIF1ADC_COMPMODE_SHIFT                1  /* AIF1ADC_COMPMODE */
+#define WM8994_AIF1ADC_COMPMODE_WIDTH                1  /* AIF1ADC_COMPMODE */
+#define WM8994_AIF1_LOOPBACK                    0x0001  /* AIF1_LOOPBACK */
+#define WM8994_AIF1_LOOPBACK_MASK               0x0001  /* AIF1_LOOPBACK */
+#define WM8994_AIF1_LOOPBACK_SHIFT                   0  /* AIF1_LOOPBACK */
+#define WM8994_AIF1_LOOPBACK_WIDTH                   1  /* AIF1_LOOPBACK */
+
+/*
+ * R770 (0x302) - AIF1 Master/Slave
+ */
+#define WM8994_AIF1_TRI                         0x8000  /* AIF1_TRI */
+#define WM8994_AIF1_TRI_MASK                    0x8000  /* AIF1_TRI */
+#define WM8994_AIF1_TRI_SHIFT                       15  /* AIF1_TRI */
+#define WM8994_AIF1_TRI_WIDTH                        1  /* AIF1_TRI */
+#define WM8994_AIF1_MSTR                        0x4000  /* AIF1_MSTR */
+#define WM8994_AIF1_MSTR_MASK                   0x4000  /* AIF1_MSTR */
+#define WM8994_AIF1_MSTR_SHIFT                      14  /* AIF1_MSTR */
+#define WM8994_AIF1_MSTR_WIDTH                       1  /* AIF1_MSTR */
+#define WM8994_AIF1_CLK_FRC                     0x2000  /* AIF1_CLK_FRC */
+#define WM8994_AIF1_CLK_FRC_MASK                0x2000  /* AIF1_CLK_FRC */
+#define WM8994_AIF1_CLK_FRC_SHIFT                   13  /* AIF1_CLK_FRC */
+#define WM8994_AIF1_CLK_FRC_WIDTH                    1  /* AIF1_CLK_FRC */
+#define WM8994_AIF1_LRCLK_FRC                   0x1000  /* AIF1_LRCLK_FRC */
+#define WM8994_AIF1_LRCLK_FRC_MASK              0x1000  /* AIF1_LRCLK_FRC */
+#define WM8994_AIF1_LRCLK_FRC_SHIFT                 12  /* AIF1_LRCLK_FRC */
+#define WM8994_AIF1_LRCLK_FRC_WIDTH                  1  /* AIF1_LRCLK_FRC */
+
+/*
+ * R771 (0x303) - AIF1 BCLK
+ */
+#define WM8994_AIF1_BCLK_DIV_MASK               0x01F0  /* AIF1_BCLK_DIV - [8:4] */
+#define WM8994_AIF1_BCLK_DIV_SHIFT                   4  /* AIF1_BCLK_DIV - [8:4] */
+#define WM8994_AIF1_BCLK_DIV_WIDTH                   5  /* AIF1_BCLK_DIV - [8:4] */
+
+/*
+ * R772 (0x304) - AIF1ADC LRCLK
+ */
+#define WM8994_AIF1ADC_LRCLK_DIR                0x0800  /* AIF1ADC_LRCLK_DIR */
+#define WM8994_AIF1ADC_LRCLK_DIR_MASK           0x0800  /* AIF1ADC_LRCLK_DIR */
+#define WM8994_AIF1ADC_LRCLK_DIR_SHIFT              11  /* AIF1ADC_LRCLK_DIR */
+#define WM8994_AIF1ADC_LRCLK_DIR_WIDTH               1  /* AIF1ADC_LRCLK_DIR */
+#define WM8994_AIF1ADC_RATE_MASK                0x07FF  /* AIF1ADC_RATE - [10:0] */
+#define WM8994_AIF1ADC_RATE_SHIFT                    0  /* AIF1ADC_RATE - [10:0] */
+#define WM8994_AIF1ADC_RATE_WIDTH                   11  /* AIF1ADC_RATE - [10:0] */
+
+/*
+ * R773 (0x305) - AIF1DAC LRCLK
+ */
+#define WM8994_AIF1DAC_LRCLK_DIR                0x0800  /* AIF1DAC_LRCLK_DIR */
+#define WM8994_AIF1DAC_LRCLK_DIR_MASK           0x0800  /* AIF1DAC_LRCLK_DIR */
+#define WM8994_AIF1DAC_LRCLK_DIR_SHIFT              11  /* AIF1DAC_LRCLK_DIR */
+#define WM8994_AIF1DAC_LRCLK_DIR_WIDTH               1  /* AIF1DAC_LRCLK_DIR */
+#define WM8994_AIF1DAC_RATE_MASK                0x07FF  /* AIF1DAC_RATE - [10:0] */
+#define WM8994_AIF1DAC_RATE_SHIFT                    0  /* AIF1DAC_RATE - [10:0] */
+#define WM8994_AIF1DAC_RATE_WIDTH                   11  /* AIF1DAC_RATE - [10:0] */
+
+/*
+ * R774 (0x306) - AIF1DAC Data
+ */
+#define WM8994_AIF1DACL_DAT_INV                 0x0002  /* AIF1DACL_DAT_INV */
+#define WM8994_AIF1DACL_DAT_INV_MASK            0x0002  /* AIF1DACL_DAT_INV */
+#define WM8994_AIF1DACL_DAT_INV_SHIFT                1  /* AIF1DACL_DAT_INV */
+#define WM8994_AIF1DACL_DAT_INV_WIDTH                1  /* AIF1DACL_DAT_INV */
+#define WM8994_AIF1DACR_DAT_INV                 0x0001  /* AIF1DACR_DAT_INV */
+#define WM8994_AIF1DACR_DAT_INV_MASK            0x0001  /* AIF1DACR_DAT_INV */
+#define WM8994_AIF1DACR_DAT_INV_SHIFT                0  /* AIF1DACR_DAT_INV */
+#define WM8994_AIF1DACR_DAT_INV_WIDTH                1  /* AIF1DACR_DAT_INV */
+
+/*
+ * R775 (0x307) - AIF1ADC Data
+ */
+#define WM8994_AIF1ADCL_DAT_INV                 0x0002  /* AIF1ADCL_DAT_INV */
+#define WM8994_AIF1ADCL_DAT_INV_MASK            0x0002  /* AIF1ADCL_DAT_INV */
+#define WM8994_AIF1ADCL_DAT_INV_SHIFT                1  /* AIF1ADCL_DAT_INV */
+#define WM8994_AIF1ADCL_DAT_INV_WIDTH                1  /* AIF1ADCL_DAT_INV */
+#define WM8994_AIF1ADCR_DAT_INV                 0x0001  /* AIF1ADCR_DAT_INV */
+#define WM8994_AIF1ADCR_DAT_INV_MASK            0x0001  /* AIF1ADCR_DAT_INV */
+#define WM8994_AIF1ADCR_DAT_INV_SHIFT                0  /* AIF1ADCR_DAT_INV */
+#define WM8994_AIF1ADCR_DAT_INV_WIDTH                1  /* AIF1ADCR_DAT_INV */
+
+/*
+ * R784 (0x310) - AIF2 Control (1)
+ */
+#define WM8994_AIF2ADCL_SRC                     0x8000  /* AIF2ADCL_SRC */
+#define WM8994_AIF2ADCL_SRC_MASK                0x8000  /* AIF2ADCL_SRC */
+#define WM8994_AIF2ADCL_SRC_SHIFT                   15  /* AIF2ADCL_SRC */
+#define WM8994_AIF2ADCL_SRC_WIDTH                    1  /* AIF2ADCL_SRC */
+#define WM8994_AIF2ADCR_SRC                     0x4000  /* AIF2ADCR_SRC */
+#define WM8994_AIF2ADCR_SRC_MASK                0x4000  /* AIF2ADCR_SRC */
+#define WM8994_AIF2ADCR_SRC_SHIFT                   14  /* AIF2ADCR_SRC */
+#define WM8994_AIF2ADCR_SRC_WIDTH                    1  /* AIF2ADCR_SRC */
+#define WM8994_AIF2ADC_TDM                      0x2000  /* AIF2ADC_TDM */
+#define WM8994_AIF2ADC_TDM_MASK                 0x2000  /* AIF2ADC_TDM */
+#define WM8994_AIF2ADC_TDM_SHIFT                    13  /* AIF2ADC_TDM */
+#define WM8994_AIF2ADC_TDM_WIDTH                     1  /* AIF2ADC_TDM */
+#define WM8994_AIF2ADC_TDM_CHAN                 0x1000  /* AIF2ADC_TDM_CHAN */
+#define WM8994_AIF2ADC_TDM_CHAN_MASK            0x1000  /* AIF2ADC_TDM_CHAN */
+#define WM8994_AIF2ADC_TDM_CHAN_SHIFT               12  /* AIF2ADC_TDM_CHAN */
+#define WM8994_AIF2ADC_TDM_CHAN_WIDTH                1  /* AIF2ADC_TDM_CHAN */
+#define WM8994_AIF2_BCLK_INV                    0x0100  /* AIF2_BCLK_INV */
+#define WM8994_AIF2_BCLK_INV_MASK               0x0100  /* AIF2_BCLK_INV */
+#define WM8994_AIF2_BCLK_INV_SHIFT                   8  /* AIF2_BCLK_INV */
+#define WM8994_AIF2_BCLK_INV_WIDTH                   1  /* AIF2_BCLK_INV */
+#define WM8994_AIF2_LRCLK_INV                   0x0080  /* AIF2_LRCLK_INV */
+#define WM8994_AIF2_LRCLK_INV_MASK              0x0080  /* AIF2_LRCLK_INV */
+#define WM8994_AIF2_LRCLK_INV_SHIFT                  7  /* AIF2_LRCLK_INV */
+#define WM8994_AIF2_LRCLK_INV_WIDTH                  1  /* AIF2_LRCLK_INV */
+#define WM8994_AIF2_WL_MASK                     0x0060  /* AIF2_WL - [6:5] */
+#define WM8994_AIF2_WL_SHIFT                         5  /* AIF2_WL - [6:5] */
+#define WM8994_AIF2_WL_WIDTH                         2  /* AIF2_WL - [6:5] */
+#define WM8994_AIF2_FMT_MASK                    0x0018  /* AIF2_FMT - [4:3] */
+#define WM8994_AIF2_FMT_SHIFT                        3  /* AIF2_FMT - [4:3] */
+#define WM8994_AIF2_FMT_WIDTH                        2  /* AIF2_FMT - [4:3] */
+
+/*
+ * R785 (0x311) - AIF2 Control (2)
+ */
+#define WM8994_AIF2DACL_SRC                     0x8000  /* AIF2DACL_SRC */
+#define WM8994_AIF2DACL_SRC_MASK                0x8000  /* AIF2DACL_SRC */
+#define WM8994_AIF2DACL_SRC_SHIFT                   15  /* AIF2DACL_SRC */
+#define WM8994_AIF2DACL_SRC_WIDTH                    1  /* AIF2DACL_SRC */
+#define WM8994_AIF2DACR_SRC                     0x4000  /* AIF2DACR_SRC */
+#define WM8994_AIF2DACR_SRC_MASK                0x4000  /* AIF2DACR_SRC */
+#define WM8994_AIF2DACR_SRC_SHIFT                   14  /* AIF2DACR_SRC */
+#define WM8994_AIF2DACR_SRC_WIDTH                    1  /* AIF2DACR_SRC */
+#define WM8994_AIF2DAC_TDM                      0x2000  /* AIF2DAC_TDM */
+#define WM8994_AIF2DAC_TDM_MASK                 0x2000  /* AIF2DAC_TDM */
+#define WM8994_AIF2DAC_TDM_SHIFT                    13  /* AIF2DAC_TDM */
+#define WM8994_AIF2DAC_TDM_WIDTH                     1  /* AIF2DAC_TDM */
+#define WM8994_AIF2DAC_TDM_CHAN                 0x1000  /* AIF2DAC_TDM_CHAN */
+#define WM8994_AIF2DAC_TDM_CHAN_MASK            0x1000  /* AIF2DAC_TDM_CHAN */
+#define WM8994_AIF2DAC_TDM_CHAN_SHIFT               12  /* AIF2DAC_TDM_CHAN */
+#define WM8994_AIF2DAC_TDM_CHAN_WIDTH                1  /* AIF2DAC_TDM_CHAN */
+#define WM8994_AIF2DAC_BOOST_MASK               0x0C00  /* AIF2DAC_BOOST - [11:10] */
+#define WM8994_AIF2DAC_BOOST_SHIFT                  10  /* AIF2DAC_BOOST - [11:10] */
+#define WM8994_AIF2DAC_BOOST_WIDTH                   2  /* AIF2DAC_BOOST - [11:10] */
+#define WM8994_AIF2_MONO                        0x0100  /* AIF2_MONO */
+#define WM8994_AIF2_MONO_MASK                   0x0100  /* AIF2_MONO */
+#define WM8994_AIF2_MONO_SHIFT                       8  /* AIF2_MONO */
+#define WM8994_AIF2_MONO_WIDTH                       1  /* AIF2_MONO */
+#define WM8994_AIF2DAC_COMP                     0x0010  /* AIF2DAC_COMP */
+#define WM8994_AIF2DAC_COMP_MASK                0x0010  /* AIF2DAC_COMP */
+#define WM8994_AIF2DAC_COMP_SHIFT                    4  /* AIF2DAC_COMP */
+#define WM8994_AIF2DAC_COMP_WIDTH                    1  /* AIF2DAC_COMP */
+#define WM8994_AIF2DAC_COMPMODE                 0x0008  /* AIF2DAC_COMPMODE */
+#define WM8994_AIF2DAC_COMPMODE_MASK            0x0008  /* AIF2DAC_COMPMODE */
+#define WM8994_AIF2DAC_COMPMODE_SHIFT                3  /* AIF2DAC_COMPMODE */
+#define WM8994_AIF2DAC_COMPMODE_WIDTH                1  /* AIF2DAC_COMPMODE */
+#define WM8994_AIF2ADC_COMP                     0x0004  /* AIF2ADC_COMP */
+#define WM8994_AIF2ADC_COMP_MASK                0x0004  /* AIF2ADC_COMP */
+#define WM8994_AIF2ADC_COMP_SHIFT                    2  /* AIF2ADC_COMP */
+#define WM8994_AIF2ADC_COMP_WIDTH                    1  /* AIF2ADC_COMP */
+#define WM8994_AIF2ADC_COMPMODE                 0x0002  /* AIF2ADC_COMPMODE */
+#define WM8994_AIF2ADC_COMPMODE_MASK            0x0002  /* AIF2ADC_COMPMODE */
+#define WM8994_AIF2ADC_COMPMODE_SHIFT                1  /* AIF2ADC_COMPMODE */
+#define WM8994_AIF2ADC_COMPMODE_WIDTH                1  /* AIF2ADC_COMPMODE */
+#define WM8994_AIF2_LOOPBACK                    0x0001  /* AIF2_LOOPBACK */
+#define WM8994_AIF2_LOOPBACK_MASK               0x0001  /* AIF2_LOOPBACK */
+#define WM8994_AIF2_LOOPBACK_SHIFT                   0  /* AIF2_LOOPBACK */
+#define WM8994_AIF2_LOOPBACK_WIDTH                   1  /* AIF2_LOOPBACK */
+
+/*
+ * R786 (0x312) - AIF2 Master/Slave
+ */
+#define WM8994_AIF2_TRI                         0x8000  /* AIF2_TRI */
+#define WM8994_AIF2_TRI_MASK                    0x8000  /* AIF2_TRI */
+#define WM8994_AIF2_TRI_SHIFT                       15  /* AIF2_TRI */
+#define WM8994_AIF2_TRI_WIDTH                        1  /* AIF2_TRI */
+#define WM8994_AIF2_MSTR                        0x4000  /* AIF2_MSTR */
+#define WM8994_AIF2_MSTR_MASK                   0x4000  /* AIF2_MSTR */
+#define WM8994_AIF2_MSTR_SHIFT                      14  /* AIF2_MSTR */
+#define WM8994_AIF2_MSTR_WIDTH                       1  /* AIF2_MSTR */
+#define WM8994_AIF2_CLK_FRC                     0x2000  /* AIF2_CLK_FRC */
+#define WM8994_AIF2_CLK_FRC_MASK                0x2000  /* AIF2_CLK_FRC */
+#define WM8994_AIF2_CLK_FRC_SHIFT                   13  /* AIF2_CLK_FRC */
+#define WM8994_AIF2_CLK_FRC_WIDTH                    1  /* AIF2_CLK_FRC */
+#define WM8994_AIF2_LRCLK_FRC                   0x1000  /* AIF2_LRCLK_FRC */
+#define WM8994_AIF2_LRCLK_FRC_MASK              0x1000  /* AIF2_LRCLK_FRC */
+#define WM8994_AIF2_LRCLK_FRC_SHIFT                 12  /* AIF2_LRCLK_FRC */
+#define WM8994_AIF2_LRCLK_FRC_WIDTH                  1  /* AIF2_LRCLK_FRC */
+
+/*
+ * R787 (0x313) - AIF2 BCLK
+ */
+#define WM8994_AIF2_BCLK_DIV_MASK               0x01F0  /* AIF2_BCLK_DIV - [8:4] */
+#define WM8994_AIF2_BCLK_DIV_SHIFT                   4  /* AIF2_BCLK_DIV - [8:4] */
+#define WM8994_AIF2_BCLK_DIV_WIDTH                   5  /* AIF2_BCLK_DIV - [8:4] */
+
+/*
+ * R788 (0x314) - AIF2ADC LRCLK
+ */
+#define WM8994_AIF2ADC_LRCLK_DIR                0x0800  /* AIF2ADC_LRCLK_DIR */
+#define WM8994_AIF2ADC_LRCLK_DIR_MASK           0x0800  /* AIF2ADC_LRCLK_DIR */
+#define WM8994_AIF2ADC_LRCLK_DIR_SHIFT              11  /* AIF2ADC_LRCLK_DIR */
+#define WM8994_AIF2ADC_LRCLK_DIR_WIDTH               1  /* AIF2ADC_LRCLK_DIR */
+#define WM8994_AIF2ADC_RATE_MASK                0x07FF  /* AIF2ADC_RATE - [10:0] */
+#define WM8994_AIF2ADC_RATE_SHIFT                    0  /* AIF2ADC_RATE - [10:0] */
+#define WM8994_AIF2ADC_RATE_WIDTH                   11  /* AIF2ADC_RATE - [10:0] */
+
+/*
+ * R789 (0x315) - AIF2DAC LRCLK
+ */
+#define WM8994_AIF2DAC_LRCLK_DIR                0x0800  /* AIF2DAC_LRCLK_DIR */
+#define WM8994_AIF2DAC_LRCLK_DIR_MASK           0x0800  /* AIF2DAC_LRCLK_DIR */
+#define WM8994_AIF2DAC_LRCLK_DIR_SHIFT              11  /* AIF2DAC_LRCLK_DIR */
+#define WM8994_AIF2DAC_LRCLK_DIR_WIDTH               1  /* AIF2DAC_LRCLK_DIR */
+#define WM8994_AIF2DAC_RATE_MASK                0x07FF  /* AIF2DAC_RATE - [10:0] */
+#define WM8994_AIF2DAC_RATE_SHIFT                    0  /* AIF2DAC_RATE - [10:0] */
+#define WM8994_AIF2DAC_RATE_WIDTH                   11  /* AIF2DAC_RATE - [10:0] */
+
+/*
+ * R790 (0x316) - AIF2DAC Data
+ */
+#define WM8994_AIF2DACL_DAT_INV                 0x0002  /* AIF2DACL_DAT_INV */
+#define WM8994_AIF2DACL_DAT_INV_MASK            0x0002  /* AIF2DACL_DAT_INV */
+#define WM8994_AIF2DACL_DAT_INV_SHIFT                1  /* AIF2DACL_DAT_INV */
+#define WM8994_AIF2DACL_DAT_INV_WIDTH                1  /* AIF2DACL_DAT_INV */
+#define WM8994_AIF2DACR_DAT_INV                 0x0001  /* AIF2DACR_DAT_INV */
+#define WM8994_AIF2DACR_DAT_INV_MASK            0x0001  /* AIF2DACR_DAT_INV */
+#define WM8994_AIF2DACR_DAT_INV_SHIFT                0  /* AIF2DACR_DAT_INV */
+#define WM8994_AIF2DACR_DAT_INV_WIDTH                1  /* AIF2DACR_DAT_INV */
+
+/*
+ * R791 (0x317) - AIF2ADC Data
+ */
+#define WM8994_AIF2ADCL_DAT_INV                 0x0002  /* AIF2ADCL_DAT_INV */
+#define WM8994_AIF2ADCL_DAT_INV_MASK            0x0002  /* AIF2ADCL_DAT_INV */
+#define WM8994_AIF2ADCL_DAT_INV_SHIFT                1  /* AIF2ADCL_DAT_INV */
+#define WM8994_AIF2ADCL_DAT_INV_WIDTH                1  /* AIF2ADCL_DAT_INV */
+#define WM8994_AIF2ADCR_DAT_INV                 0x0001  /* AIF2ADCR_DAT_INV */
+#define WM8994_AIF2ADCR_DAT_INV_MASK            0x0001  /* AIF2ADCR_DAT_INV */
+#define WM8994_AIF2ADCR_DAT_INV_SHIFT                0  /* AIF2ADCR_DAT_INV */
+#define WM8994_AIF2ADCR_DAT_INV_WIDTH                1  /* AIF2ADCR_DAT_INV */
+
+/*
+ * R800 (0x320) - AIF3 Control (1)
+ */
+#define WM8958_AIF3_LRCLK_INV                   0x0080  /* AIF3_LRCLK_INV */
+#define WM8958_AIF3_LRCLK_INV_MASK              0x0080  /* AIF3_LRCLK_INV */
+#define WM8958_AIF3_LRCLK_INV_SHIFT                  7  /* AIF3_LRCLK_INV */
+#define WM8958_AIF3_LRCLK_INV_WIDTH                  1  /* AIF3_LRCLK_INV */
+#define WM8958_AIF3_WL_MASK                     0x0060  /* AIF3_WL - [6:5] */
+#define WM8958_AIF3_WL_SHIFT                         5  /* AIF3_WL - [6:5] */
+#define WM8958_AIF3_WL_WIDTH                         2  /* AIF3_WL - [6:5] */
+#define WM8958_AIF3_FMT_MASK                    0x0018  /* AIF3_FMT - [4:3] */
+#define WM8958_AIF3_FMT_SHIFT                        3  /* AIF3_FMT - [4:3] */
+#define WM8958_AIF3_FMT_WIDTH                        2  /* AIF3_FMT - [4:3] */
+
+/*
+ * R801 (0x321) - AIF3 Control (2)
+ */
+#define WM8958_AIF3DAC_BOOST_MASK               0x0C00  /* AIF3DAC_BOOST - [11:10] */
+#define WM8958_AIF3DAC_BOOST_SHIFT                  10  /* AIF3DAC_BOOST - [11:10] */
+#define WM8958_AIF3DAC_BOOST_WIDTH                   2  /* AIF3DAC_BOOST - [11:10] */
+#define WM8958_AIF3DAC_COMP                     0x0010  /* AIF3DAC_COMP */
+#define WM8958_AIF3DAC_COMP_MASK                0x0010  /* AIF3DAC_COMP */
+#define WM8958_AIF3DAC_COMP_SHIFT                    4  /* AIF3DAC_COMP */
+#define WM8958_AIF3DAC_COMP_WIDTH                    1  /* AIF3DAC_COMP */
+#define WM8958_AIF3DAC_COMPMODE                 0x0008  /* AIF3DAC_COMPMODE */
+#define WM8958_AIF3DAC_COMPMODE_MASK            0x0008  /* AIF3DAC_COMPMODE */
+#define WM8958_AIF3DAC_COMPMODE_SHIFT                3  /* AIF3DAC_COMPMODE */
+#define WM8958_AIF3DAC_COMPMODE_WIDTH                1  /* AIF3DAC_COMPMODE */
+#define WM8958_AIF3ADC_COMP                     0x0004  /* AIF3ADC_COMP */
+#define WM8958_AIF3ADC_COMP_MASK                0x0004  /* AIF3ADC_COMP */
+#define WM8958_AIF3ADC_COMP_SHIFT                    2  /* AIF3ADC_COMP */
+#define WM8958_AIF3ADC_COMP_WIDTH                    1  /* AIF3ADC_COMP */
+#define WM8958_AIF3ADC_COMPMODE                 0x0002  /* AIF3ADC_COMPMODE */
+#define WM8958_AIF3ADC_COMPMODE_MASK            0x0002  /* AIF3ADC_COMPMODE */
+#define WM8958_AIF3ADC_COMPMODE_SHIFT                1  /* AIF3ADC_COMPMODE */
+#define WM8958_AIF3ADC_COMPMODE_WIDTH                1  /* AIF3ADC_COMPMODE */
+#define WM8958_AIF3_LOOPBACK                    0x0001  /* AIF3_LOOPBACK */
+#define WM8958_AIF3_LOOPBACK_MASK               0x0001  /* AIF3_LOOPBACK */
+#define WM8958_AIF3_LOOPBACK_SHIFT                   0  /* AIF3_LOOPBACK */
+#define WM8958_AIF3_LOOPBACK_WIDTH                   1  /* AIF3_LOOPBACK */
+
+/*
+ * R802 (0x322) - AIF3DAC Data
+ */
+#define WM8958_AIF3DAC_DAT_INV                  0x0001  /* AIF3DAC_DAT_INV */
+#define WM8958_AIF3DAC_DAT_INV_MASK             0x0001  /* AIF3DAC_DAT_INV */
+#define WM8958_AIF3DAC_DAT_INV_SHIFT                 0  /* AIF3DAC_DAT_INV */
+#define WM8958_AIF3DAC_DAT_INV_WIDTH                 1  /* AIF3DAC_DAT_INV */
+
+/*
+ * R803 (0x323) - AIF3ADC Data
+ */
+#define WM8958_AIF3ADC_DAT_INV                  0x0001  /* AIF3ADC_DAT_INV */
+#define WM8958_AIF3ADC_DAT_INV_MASK             0x0001  /* AIF3ADC_DAT_INV */
+#define WM8958_AIF3ADC_DAT_INV_SHIFT                 0  /* AIF3ADC_DAT_INV */
+#define WM8958_AIF3ADC_DAT_INV_WIDTH                 1  /* AIF3ADC_DAT_INV */
+
+/*
+ * R1024 (0x400) - AIF1 ADC1 Left Volume
+ */
+#define WM8994_AIF1ADC1_VU                      0x0100  /* AIF1ADC1_VU */
+#define WM8994_AIF1ADC1_VU_MASK                 0x0100  /* AIF1ADC1_VU */
+#define WM8994_AIF1ADC1_VU_SHIFT                     8  /* AIF1ADC1_VU */
+#define WM8994_AIF1ADC1_VU_WIDTH                     1  /* AIF1ADC1_VU */
+#define WM8994_AIF1ADC1L_VOL_MASK               0x00FF  /* AIF1ADC1L_VOL - [7:0] */
+#define WM8994_AIF1ADC1L_VOL_SHIFT                   0  /* AIF1ADC1L_VOL - [7:0] */
+#define WM8994_AIF1ADC1L_VOL_WIDTH                   8  /* AIF1ADC1L_VOL - [7:0] */
+
+/*
+ * R1025 (0x401) - AIF1 ADC1 Right Volume
+ */
+#define WM8994_AIF1ADC1_VU                      0x0100  /* AIF1ADC1_VU */
+#define WM8994_AIF1ADC1_VU_MASK                 0x0100  /* AIF1ADC1_VU */
+#define WM8994_AIF1ADC1_VU_SHIFT                     8  /* AIF1ADC1_VU */
+#define WM8994_AIF1ADC1_VU_WIDTH                     1  /* AIF1ADC1_VU */
+#define WM8994_AIF1ADC1R_VOL_MASK               0x00FF  /* AIF1ADC1R_VOL - [7:0] */
+#define WM8994_AIF1ADC1R_VOL_SHIFT                   0  /* AIF1ADC1R_VOL - [7:0] */
+#define WM8994_AIF1ADC1R_VOL_WIDTH                   8  /* AIF1ADC1R_VOL - [7:0] */
+
+/*
+ * R1026 (0x402) - AIF1 DAC1 Left Volume
+ */
+#define WM8994_AIF1DAC1_VU                      0x0100  /* AIF1DAC1_VU */
+#define WM8994_AIF1DAC1_VU_MASK                 0x0100  /* AIF1DAC1_VU */
+#define WM8994_AIF1DAC1_VU_SHIFT                     8  /* AIF1DAC1_VU */
+#define WM8994_AIF1DAC1_VU_WIDTH                     1  /* AIF1DAC1_VU */
+#define WM8994_AIF1DAC1L_VOL_MASK               0x00FF  /* AIF1DAC1L_VOL - [7:0] */
+#define WM8994_AIF1DAC1L_VOL_SHIFT                   0  /* AIF1DAC1L_VOL - [7:0] */
+#define WM8994_AIF1DAC1L_VOL_WIDTH                   8  /* AIF1DAC1L_VOL - [7:0] */
+
+/*
+ * R1027 (0x403) - AIF1 DAC1 Right Volume
+ */
+#define WM8994_AIF1DAC1_VU                      0x0100  /* AIF1DAC1_VU */
+#define WM8994_AIF1DAC1_VU_MASK                 0x0100  /* AIF1DAC1_VU */
+#define WM8994_AIF1DAC1_VU_SHIFT                     8  /* AIF1DAC1_VU */
+#define WM8994_AIF1DAC1_VU_WIDTH                     1  /* AIF1DAC1_VU */
+#define WM8994_AIF1DAC1R_VOL_MASK               0x00FF  /* AIF1DAC1R_VOL - [7:0] */
+#define WM8994_AIF1DAC1R_VOL_SHIFT                   0  /* AIF1DAC1R_VOL - [7:0] */
+#define WM8994_AIF1DAC1R_VOL_WIDTH                   8  /* AIF1DAC1R_VOL - [7:0] */
+
+/*
+ * R1028 (0x404) - AIF1 ADC2 Left Volume
+ */
+#define WM8994_AIF1ADC2_VU                      0x0100  /* AIF1ADC2_VU */
+#define WM8994_AIF1ADC2_VU_MASK                 0x0100  /* AIF1ADC2_VU */
+#define WM8994_AIF1ADC2_VU_SHIFT                     8  /* AIF1ADC2_VU */
+#define WM8994_AIF1ADC2_VU_WIDTH                     1  /* AIF1ADC2_VU */
+#define WM8994_AIF1ADC2L_VOL_MASK               0x00FF  /* AIF1ADC2L_VOL - [7:0] */
+#define WM8994_AIF1ADC2L_VOL_SHIFT                   0  /* AIF1ADC2L_VOL - [7:0] */
+#define WM8994_AIF1ADC2L_VOL_WIDTH                   8  /* AIF1ADC2L_VOL - [7:0] */
+
+/*
+ * R1029 (0x405) - AIF1 ADC2 Right Volume
+ */
+#define WM8994_AIF1ADC2_VU                      0x0100  /* AIF1ADC2_VU */
+#define WM8994_AIF1ADC2_VU_MASK                 0x0100  /* AIF1ADC2_VU */
+#define WM8994_AIF1ADC2_VU_SHIFT                     8  /* AIF1ADC2_VU */
+#define WM8994_AIF1ADC2_VU_WIDTH                     1  /* AIF1ADC2_VU */
+#define WM8994_AIF1ADC2R_VOL_MASK               0x00FF  /* AIF1ADC2R_VOL - [7:0] */
+#define WM8994_AIF1ADC2R_VOL_SHIFT                   0  /* AIF1ADC2R_VOL - [7:0] */
+#define WM8994_AIF1ADC2R_VOL_WIDTH                   8  /* AIF1ADC2R_VOL - [7:0] */
+
+/*
+ * R1030 (0x406) - AIF1 DAC2 Left Volume
+ */
+#define WM8994_AIF1DAC2_VU                      0x0100  /* AIF1DAC2_VU */
+#define WM8994_AIF1DAC2_VU_MASK                 0x0100  /* AIF1DAC2_VU */
+#define WM8994_AIF1DAC2_VU_SHIFT                     8  /* AIF1DAC2_VU */
+#define WM8994_AIF1DAC2_VU_WIDTH                     1  /* AIF1DAC2_VU */
+#define WM8994_AIF1DAC2L_VOL_MASK               0x00FF  /* AIF1DAC2L_VOL - [7:0] */
+#define WM8994_AIF1DAC2L_VOL_SHIFT                   0  /* AIF1DAC2L_VOL - [7:0] */
+#define WM8994_AIF1DAC2L_VOL_WIDTH                   8  /* AIF1DAC2L_VOL - [7:0] */
+
+/*
+ * R1031 (0x407) - AIF1 DAC2 Right Volume
+ */
+#define WM8994_AIF1DAC2_VU                      0x0100  /* AIF1DAC2_VU */
+#define WM8994_AIF1DAC2_VU_MASK                 0x0100  /* AIF1DAC2_VU */
+#define WM8994_AIF1DAC2_VU_SHIFT                     8  /* AIF1DAC2_VU */
+#define WM8994_AIF1DAC2_VU_WIDTH                     1  /* AIF1DAC2_VU */
+#define WM8994_AIF1DAC2R_VOL_MASK               0x00FF  /* AIF1DAC2R_VOL - [7:0] */
+#define WM8994_AIF1DAC2R_VOL_SHIFT                   0  /* AIF1DAC2R_VOL - [7:0] */
+#define WM8994_AIF1DAC2R_VOL_WIDTH                   8  /* AIF1DAC2R_VOL - [7:0] */
+
+/*
+ * R1040 (0x410) - AIF1 ADC1 Filters
+ */
+#define WM8994_AIF1ADC_4FS                      0x8000  /* AIF1ADC_4FS */
+#define WM8994_AIF1ADC_4FS_MASK                 0x8000  /* AIF1ADC_4FS */
+#define WM8994_AIF1ADC_4FS_SHIFT                    15  /* AIF1ADC_4FS */
+#define WM8994_AIF1ADC_4FS_WIDTH                     1  /* AIF1ADC_4FS */
+#define WM8994_AIF1ADC1_HPF_CUT_MASK            0x6000  /* AIF1ADC1_HPF_CUT - [14:13] */
+#define WM8994_AIF1ADC1_HPF_CUT_SHIFT               13  /* AIF1ADC1_HPF_CUT - [14:13] */
+#define WM8994_AIF1ADC1_HPF_CUT_WIDTH                2  /* AIF1ADC1_HPF_CUT - [14:13] */
+#define WM8994_AIF1ADC1L_HPF                    0x1000  /* AIF1ADC1L_HPF */
+#define WM8994_AIF1ADC1L_HPF_MASK               0x1000  /* AIF1ADC1L_HPF */
+#define WM8994_AIF1ADC1L_HPF_SHIFT                  12  /* AIF1ADC1L_HPF */
+#define WM8994_AIF1ADC1L_HPF_WIDTH                   1  /* AIF1ADC1L_HPF */
+#define WM8994_AIF1ADC1R_HPF                    0x0800  /* AIF1ADC1R_HPF */
+#define WM8994_AIF1ADC1R_HPF_MASK               0x0800  /* AIF1ADC1R_HPF */
+#define WM8994_AIF1ADC1R_HPF_SHIFT                  11  /* AIF1ADC1R_HPF */
+#define WM8994_AIF1ADC1R_HPF_WIDTH                   1  /* AIF1ADC1R_HPF */
+
+/*
+ * R1041 (0x411) - AIF1 ADC2 Filters
+ */
+#define WM8994_AIF1ADC2_HPF_CUT_MASK            0x6000  /* AIF1ADC2_HPF_CUT - [14:13] */
+#define WM8994_AIF1ADC2_HPF_CUT_SHIFT               13  /* AIF1ADC2_HPF_CUT - [14:13] */
+#define WM8994_AIF1ADC2_HPF_CUT_WIDTH                2  /* AIF1ADC2_HPF_CUT - [14:13] */
+#define WM8994_AIF1ADC2L_HPF                    0x1000  /* AIF1ADC2L_HPF */
+#define WM8994_AIF1ADC2L_HPF_MASK               0x1000  /* AIF1ADC2L_HPF */
+#define WM8994_AIF1ADC2L_HPF_SHIFT                  12  /* AIF1ADC2L_HPF */
+#define WM8994_AIF1ADC2L_HPF_WIDTH                   1  /* AIF1ADC2L_HPF */
+#define WM8994_AIF1ADC2R_HPF                    0x0800  /* AIF1ADC2R_HPF */
+#define WM8994_AIF1ADC2R_HPF_MASK               0x0800  /* AIF1ADC2R_HPF */
+#define WM8994_AIF1ADC2R_HPF_SHIFT                  11  /* AIF1ADC2R_HPF */
+#define WM8994_AIF1ADC2R_HPF_WIDTH                   1  /* AIF1ADC2R_HPF */
+
+/*
+ * R1056 (0x420) - AIF1 DAC1 Filters (1)
+ */
+#define WM8994_AIF1DAC1_MUTE                    0x0200  /* AIF1DAC1_MUTE */
+#define WM8994_AIF1DAC1_MUTE_MASK               0x0200  /* AIF1DAC1_MUTE */
+#define WM8994_AIF1DAC1_MUTE_SHIFT                   9  /* AIF1DAC1_MUTE */
+#define WM8994_AIF1DAC1_MUTE_WIDTH                   1  /* AIF1DAC1_MUTE */
+#define WM8994_AIF1DAC1_MONO                    0x0080  /* AIF1DAC1_MONO */
+#define WM8994_AIF1DAC1_MONO_MASK               0x0080  /* AIF1DAC1_MONO */
+#define WM8994_AIF1DAC1_MONO_SHIFT                   7  /* AIF1DAC1_MONO */
+#define WM8994_AIF1DAC1_MONO_WIDTH                   1  /* AIF1DAC1_MONO */
+#define WM8994_AIF1DAC1_MUTERATE                0x0020  /* AIF1DAC1_MUTERATE */
+#define WM8994_AIF1DAC1_MUTERATE_MASK           0x0020  /* AIF1DAC1_MUTERATE */
+#define WM8994_AIF1DAC1_MUTERATE_SHIFT               5  /* AIF1DAC1_MUTERATE */
+#define WM8994_AIF1DAC1_MUTERATE_WIDTH               1  /* AIF1DAC1_MUTERATE */
+#define WM8994_AIF1DAC1_UNMUTE_RAMP             0x0010  /* AIF1DAC1_UNMUTE_RAMP */
+#define WM8994_AIF1DAC1_UNMUTE_RAMP_MASK        0x0010  /* AIF1DAC1_UNMUTE_RAMP */
+#define WM8994_AIF1DAC1_UNMUTE_RAMP_SHIFT            4  /* AIF1DAC1_UNMUTE_RAMP */
+#define WM8994_AIF1DAC1_UNMUTE_RAMP_WIDTH            1  /* AIF1DAC1_UNMUTE_RAMP */
+#define WM8994_AIF1DAC1_DEEMP_MASK              0x0006  /* AIF1DAC1_DEEMP - [2:1] */
+#define WM8994_AIF1DAC1_DEEMP_SHIFT                  1  /* AIF1DAC1_DEEMP - [2:1] */
+#define WM8994_AIF1DAC1_DEEMP_WIDTH                  2  /* AIF1DAC1_DEEMP - [2:1] */
+
+/*
+ * R1057 (0x421) - AIF1 DAC1 Filters (2)
+ */
+#define WM8994_AIF1DAC1_3D_GAIN_MASK            0x3E00  /* AIF1DAC1_3D_GAIN - [13:9] */
+#define WM8994_AIF1DAC1_3D_GAIN_SHIFT                9  /* AIF1DAC1_3D_GAIN - [13:9] */
+#define WM8994_AIF1DAC1_3D_GAIN_WIDTH                5  /* AIF1DAC1_3D_GAIN - [13:9] */
+#define WM8994_AIF1DAC1_3D_ENA                  0x0100  /* AIF1DAC1_3D_ENA */
+#define WM8994_AIF1DAC1_3D_ENA_MASK             0x0100  /* AIF1DAC1_3D_ENA */
+#define WM8994_AIF1DAC1_3D_ENA_SHIFT                 8  /* AIF1DAC1_3D_ENA */
+#define WM8994_AIF1DAC1_3D_ENA_WIDTH                 1  /* AIF1DAC1_3D_ENA */
+
+/*
+ * R1058 (0x422) - AIF1 DAC2 Filters (1)
+ */
+#define WM8994_AIF1DAC2_MUTE                    0x0200  /* AIF1DAC2_MUTE */
+#define WM8994_AIF1DAC2_MUTE_MASK               0x0200  /* AIF1DAC2_MUTE */
+#define WM8994_AIF1DAC2_MUTE_SHIFT                   9  /* AIF1DAC2_MUTE */
+#define WM8994_AIF1DAC2_MUTE_WIDTH                   1  /* AIF1DAC2_MUTE */
+#define WM8994_AIF1DAC2_MONO                    0x0080  /* AIF1DAC2_MONO */
+#define WM8994_AIF1DAC2_MONO_MASK               0x0080  /* AIF1DAC2_MONO */
+#define WM8994_AIF1DAC2_MONO_SHIFT                   7  /* AIF1DAC2_MONO */
+#define WM8994_AIF1DAC2_MONO_WIDTH                   1  /* AIF1DAC2_MONO */
+#define WM8994_AIF1DAC2_MUTERATE                0x0020  /* AIF1DAC2_MUTERATE */
+#define WM8994_AIF1DAC2_MUTERATE_MASK           0x0020  /* AIF1DAC2_MUTERATE */
+#define WM8994_AIF1DAC2_MUTERATE_SHIFT               5  /* AIF1DAC2_MUTERATE */
+#define WM8994_AIF1DAC2_MUTERATE_WIDTH               1  /* AIF1DAC2_MUTERATE */
+#define WM8994_AIF1DAC2_UNMUTE_RAMP             0x0010  /* AIF1DAC2_UNMUTE_RAMP */
+#define WM8994_AIF1DAC2_UNMUTE_RAMP_MASK        0x0010  /* AIF1DAC2_UNMUTE_RAMP */
+#define WM8994_AIF1DAC2_UNMUTE_RAMP_SHIFT            4  /* AIF1DAC2_UNMUTE_RAMP */
+#define WM8994_AIF1DAC2_UNMUTE_RAMP_WIDTH            1  /* AIF1DAC2_UNMUTE_RAMP */
+#define WM8994_AIF1DAC2_DEEMP_MASK              0x0006  /* AIF1DAC2_DEEMP - [2:1] */
+#define WM8994_AIF1DAC2_DEEMP_SHIFT                  1  /* AIF1DAC2_DEEMP - [2:1] */
+#define WM8994_AIF1DAC2_DEEMP_WIDTH                  2  /* AIF1DAC2_DEEMP - [2:1] */
+
+/*
+ * R1059 (0x423) - AIF1 DAC2 Filters (2)
+ */
+#define WM8994_AIF1DAC2_3D_GAIN_MASK            0x3E00  /* AIF1DAC2_3D_GAIN - [13:9] */
+#define WM8994_AIF1DAC2_3D_GAIN_SHIFT                9  /* AIF1DAC2_3D_GAIN - [13:9] */
+#define WM8994_AIF1DAC2_3D_GAIN_WIDTH                5  /* AIF1DAC2_3D_GAIN - [13:9] */
+#define WM8994_AIF1DAC2_3D_ENA                  0x0100  /* AIF1DAC2_3D_ENA */
+#define WM8994_AIF1DAC2_3D_ENA_MASK             0x0100  /* AIF1DAC2_3D_ENA */
+#define WM8994_AIF1DAC2_3D_ENA_SHIFT                 8  /* AIF1DAC2_3D_ENA */
+#define WM8994_AIF1DAC2_3D_ENA_WIDTH                 1  /* AIF1DAC2_3D_ENA */
+
+/*
+ * R1072 (0x430) - AIF1 DAC1 Noise Gate
+ */
+#define WM8958_AIF1DAC1_NG_HLD_MASK             0x0060  /* AIF1DAC1_NG_HLD - [6:5] */
+#define WM8958_AIF1DAC1_NG_HLD_SHIFT                 5  /* AIF1DAC1_NG_HLD - [6:5] */
+#define WM8958_AIF1DAC1_NG_HLD_WIDTH                 2  /* AIF1DAC1_NG_HLD - [6:5] */
+#define WM8958_AIF1DAC1_NG_THR_MASK             0x000E  /* AIF1DAC1_NG_THR - [3:1] */
+#define WM8958_AIF1DAC1_NG_THR_SHIFT                 1  /* AIF1DAC1_NG_THR - [3:1] */
+#define WM8958_AIF1DAC1_NG_THR_WIDTH                 3  /* AIF1DAC1_NG_THR - [3:1] */
+#define WM8958_AIF1DAC1_NG_ENA                  0x0001  /* AIF1DAC1_NG_ENA */
+#define WM8958_AIF1DAC1_NG_ENA_MASK             0x0001  /* AIF1DAC1_NG_ENA */
+#define WM8958_AIF1DAC1_NG_ENA_SHIFT                 0  /* AIF1DAC1_NG_ENA */
+#define WM8958_AIF1DAC1_NG_ENA_WIDTH                 1  /* AIF1DAC1_NG_ENA */
+
+/*
+ * R1073 (0x431) - AIF1 DAC2 Noise Gate
+ */
+#define WM8958_AIF1DAC2_NG_HLD_MASK             0x0060  /* AIF1DAC2_NG_HLD - [6:5] */
+#define WM8958_AIF1DAC2_NG_HLD_SHIFT                 5  /* AIF1DAC2_NG_HLD - [6:5] */
+#define WM8958_AIF1DAC2_NG_HLD_WIDTH                 2  /* AIF1DAC2_NG_HLD - [6:5] */
+#define WM8958_AIF1DAC2_NG_THR_MASK             0x000E  /* AIF1DAC2_NG_THR - [3:1] */
+#define WM8958_AIF1DAC2_NG_THR_SHIFT                 1  /* AIF1DAC2_NG_THR - [3:1] */
+#define WM8958_AIF1DAC2_NG_THR_WIDTH                 3  /* AIF1DAC2_NG_THR - [3:1] */
+#define WM8958_AIF1DAC2_NG_ENA                  0x0001  /* AIF1DAC2_NG_ENA */
+#define WM8958_AIF1DAC2_NG_ENA_MASK             0x0001  /* AIF1DAC2_NG_ENA */
+#define WM8958_AIF1DAC2_NG_ENA_SHIFT                 0  /* AIF1DAC2_NG_ENA */
+#define WM8958_AIF1DAC2_NG_ENA_WIDTH                 1  /* AIF1DAC2_NG_ENA */
+
+/*
+ * R1088 (0x440) - AIF1 DRC1 (1)
+ */
+#define WM8994_AIF1DRC1_SIG_DET_RMS_MASK        0xF800  /* AIF1DRC1_SIG_DET_RMS - [15:11] */
+#define WM8994_AIF1DRC1_SIG_DET_RMS_SHIFT           11  /* AIF1DRC1_SIG_DET_RMS - [15:11] */
+#define WM8994_AIF1DRC1_SIG_DET_RMS_WIDTH            5  /* AIF1DRC1_SIG_DET_RMS - [15:11] */
+#define WM8994_AIF1DRC1_SIG_DET_PK_MASK         0x0600  /* AIF1DRC1_SIG_DET_PK - [10:9] */
+#define WM8994_AIF1DRC1_SIG_DET_PK_SHIFT             9  /* AIF1DRC1_SIG_DET_PK - [10:9] */
+#define WM8994_AIF1DRC1_SIG_DET_PK_WIDTH             2  /* AIF1DRC1_SIG_DET_PK - [10:9] */
+#define WM8994_AIF1DRC1_NG_ENA                  0x0100  /* AIF1DRC1_NG_ENA */
+#define WM8994_AIF1DRC1_NG_ENA_MASK             0x0100  /* AIF1DRC1_NG_ENA */
+#define WM8994_AIF1DRC1_NG_ENA_SHIFT                 8  /* AIF1DRC1_NG_ENA */
+#define WM8994_AIF1DRC1_NG_ENA_WIDTH                 1  /* AIF1DRC1_NG_ENA */
+#define WM8994_AIF1DRC1_SIG_DET_MODE            0x0080  /* AIF1DRC1_SIG_DET_MODE */
+#define WM8994_AIF1DRC1_SIG_DET_MODE_MASK       0x0080  /* AIF1DRC1_SIG_DET_MODE */
+#define WM8994_AIF1DRC1_SIG_DET_MODE_SHIFT           7  /* AIF1DRC1_SIG_DET_MODE */
+#define WM8994_AIF1DRC1_SIG_DET_MODE_WIDTH           1  /* AIF1DRC1_SIG_DET_MODE */
+#define WM8994_AIF1DRC1_SIG_DET                 0x0040  /* AIF1DRC1_SIG_DET */
+#define WM8994_AIF1DRC1_SIG_DET_MASK            0x0040  /* AIF1DRC1_SIG_DET */
+#define WM8994_AIF1DRC1_SIG_DET_SHIFT                6  /* AIF1DRC1_SIG_DET */
+#define WM8994_AIF1DRC1_SIG_DET_WIDTH                1  /* AIF1DRC1_SIG_DET */
+#define WM8994_AIF1DRC1_KNEE2_OP_ENA            0x0020  /* AIF1DRC1_KNEE2_OP_ENA */
+#define WM8994_AIF1DRC1_KNEE2_OP_ENA_MASK       0x0020  /* AIF1DRC1_KNEE2_OP_ENA */
+#define WM8994_AIF1DRC1_KNEE2_OP_ENA_SHIFT           5  /* AIF1DRC1_KNEE2_OP_ENA */
+#define WM8994_AIF1DRC1_KNEE2_OP_ENA_WIDTH           1  /* AIF1DRC1_KNEE2_OP_ENA */
+#define WM8994_AIF1DRC1_QR                      0x0010  /* AIF1DRC1_QR */
+#define WM8994_AIF1DRC1_QR_MASK                 0x0010  /* AIF1DRC1_QR */
+#define WM8994_AIF1DRC1_QR_SHIFT                     4  /* AIF1DRC1_QR */
+#define WM8994_AIF1DRC1_QR_WIDTH                     1  /* AIF1DRC1_QR */
+#define WM8994_AIF1DRC1_ANTICLIP                0x0008  /* AIF1DRC1_ANTICLIP */
+#define WM8994_AIF1DRC1_ANTICLIP_MASK           0x0008  /* AIF1DRC1_ANTICLIP */
+#define WM8994_AIF1DRC1_ANTICLIP_SHIFT               3  /* AIF1DRC1_ANTICLIP */
+#define WM8994_AIF1DRC1_ANTICLIP_WIDTH               1  /* AIF1DRC1_ANTICLIP */
+#define WM8994_AIF1DAC1_DRC_ENA                 0x0004  /* AIF1DAC1_DRC_ENA */
+#define WM8994_AIF1DAC1_DRC_ENA_MASK            0x0004  /* AIF1DAC1_DRC_ENA */
+#define WM8994_AIF1DAC1_DRC_ENA_SHIFT                2  /* AIF1DAC1_DRC_ENA */
+#define WM8994_AIF1DAC1_DRC_ENA_WIDTH                1  /* AIF1DAC1_DRC_ENA */
+#define WM8994_AIF1ADC1L_DRC_ENA                0x0002  /* AIF1ADC1L_DRC_ENA */
+#define WM8994_AIF1ADC1L_DRC_ENA_MASK           0x0002  /* AIF1ADC1L_DRC_ENA */
+#define WM8994_AIF1ADC1L_DRC_ENA_SHIFT               1  /* AIF1ADC1L_DRC_ENA */
+#define WM8994_AIF1ADC1L_DRC_ENA_WIDTH               1  /* AIF1ADC1L_DRC_ENA */
+#define WM8994_AIF1ADC1R_DRC_ENA                0x0001  /* AIF1ADC1R_DRC_ENA */
+#define WM8994_AIF1ADC1R_DRC_ENA_MASK           0x0001  /* AIF1ADC1R_DRC_ENA */
+#define WM8994_AIF1ADC1R_DRC_ENA_SHIFT               0  /* AIF1ADC1R_DRC_ENA */
+#define WM8994_AIF1ADC1R_DRC_ENA_WIDTH               1  /* AIF1ADC1R_DRC_ENA */
+
+/*
+ * R1089 (0x441) - AIF1 DRC1 (2)
+ */
+#define WM8994_AIF1DRC1_ATK_MASK                0x1E00  /* AIF1DRC1_ATK - [12:9] */
+#define WM8994_AIF1DRC1_ATK_SHIFT                    9  /* AIF1DRC1_ATK - [12:9] */
+#define WM8994_AIF1DRC1_ATK_WIDTH                    4  /* AIF1DRC1_ATK - [12:9] */
+#define WM8994_AIF1DRC1_DCY_MASK                0x01E0  /* AIF1DRC1_DCY - [8:5] */
+#define WM8994_AIF1DRC1_DCY_SHIFT                    5  /* AIF1DRC1_DCY - [8:5] */
+#define WM8994_AIF1DRC1_DCY_WIDTH                    4  /* AIF1DRC1_DCY - [8:5] */
+#define WM8994_AIF1DRC1_MINGAIN_MASK            0x001C  /* AIF1DRC1_MINGAIN - [4:2] */
+#define WM8994_AIF1DRC1_MINGAIN_SHIFT                2  /* AIF1DRC1_MINGAIN - [4:2] */
+#define WM8994_AIF1DRC1_MINGAIN_WIDTH                3  /* AIF1DRC1_MINGAIN - [4:2] */
+#define WM8994_AIF1DRC1_MAXGAIN_MASK            0x0003  /* AIF1DRC1_MAXGAIN - [1:0] */
+#define WM8994_AIF1DRC1_MAXGAIN_SHIFT                0  /* AIF1DRC1_MAXGAIN - [1:0] */
+#define WM8994_AIF1DRC1_MAXGAIN_WIDTH                2  /* AIF1DRC1_MAXGAIN - [1:0] */
+
+/*
+ * R1090 (0x442) - AIF1 DRC1 (3)
+ */
+#define WM8994_AIF1DRC1_NG_MINGAIN_MASK         0xF000  /* AIF1DRC1_NG_MINGAIN - [15:12] */
+#define WM8994_AIF1DRC1_NG_MINGAIN_SHIFT            12  /* AIF1DRC1_NG_MINGAIN - [15:12] */
+#define WM8994_AIF1DRC1_NG_MINGAIN_WIDTH             4  /* AIF1DRC1_NG_MINGAIN - [15:12] */
+#define WM8994_AIF1DRC1_NG_EXP_MASK             0x0C00  /* AIF1DRC1_NG_EXP - [11:10] */
+#define WM8994_AIF1DRC1_NG_EXP_SHIFT                10  /* AIF1DRC1_NG_EXP - [11:10] */
+#define WM8994_AIF1DRC1_NG_EXP_WIDTH                 2  /* AIF1DRC1_NG_EXP - [11:10] */
+#define WM8994_AIF1DRC1_QR_THR_MASK             0x0300  /* AIF1DRC1_QR_THR - [9:8] */
+#define WM8994_AIF1DRC1_QR_THR_SHIFT                 8  /* AIF1DRC1_QR_THR - [9:8] */
+#define WM8994_AIF1DRC1_QR_THR_WIDTH                 2  /* AIF1DRC1_QR_THR - [9:8] */
+#define WM8994_AIF1DRC1_QR_DCY_MASK             0x00C0  /* AIF1DRC1_QR_DCY - [7:6] */
+#define WM8994_AIF1DRC1_QR_DCY_SHIFT                 6  /* AIF1DRC1_QR_DCY - [7:6] */
+#define WM8994_AIF1DRC1_QR_DCY_WIDTH                 2  /* AIF1DRC1_QR_DCY - [7:6] */
+#define WM8994_AIF1DRC1_HI_COMP_MASK            0x0038  /* AIF1DRC1_HI_COMP - [5:3] */
+#define WM8994_AIF1DRC1_HI_COMP_SHIFT                3  /* AIF1DRC1_HI_COMP - [5:3] */
+#define WM8994_AIF1DRC1_HI_COMP_WIDTH                3  /* AIF1DRC1_HI_COMP - [5:3] */
+#define WM8994_AIF1DRC1_LO_COMP_MASK            0x0007  /* AIF1DRC1_LO_COMP - [2:0] */
+#define WM8994_AIF1DRC1_LO_COMP_SHIFT                0  /* AIF1DRC1_LO_COMP - [2:0] */
+#define WM8994_AIF1DRC1_LO_COMP_WIDTH                3  /* AIF1DRC1_LO_COMP - [2:0] */
+
+/*
+ * R1091 (0x443) - AIF1 DRC1 (4)
+ */
+#define WM8994_AIF1DRC1_KNEE_IP_MASK            0x07E0  /* AIF1DRC1_KNEE_IP - [10:5] */
+#define WM8994_AIF1DRC1_KNEE_IP_SHIFT                5  /* AIF1DRC1_KNEE_IP - [10:5] */
+#define WM8994_AIF1DRC1_KNEE_IP_WIDTH                6  /* AIF1DRC1_KNEE_IP - [10:5] */
+#define WM8994_AIF1DRC1_KNEE_OP_MASK            0x001F  /* AIF1DRC1_KNEE_OP - [4:0] */
+#define WM8994_AIF1DRC1_KNEE_OP_SHIFT                0  /* AIF1DRC1_KNEE_OP - [4:0] */
+#define WM8994_AIF1DRC1_KNEE_OP_WIDTH                5  /* AIF1DRC1_KNEE_OP - [4:0] */
+
+/*
+ * R1092 (0x444) - AIF1 DRC1 (5)
+ */
+#define WM8994_AIF1DRC1_KNEE2_IP_MASK           0x03E0  /* AIF1DRC1_KNEE2_IP - [9:5] */
+#define WM8994_AIF1DRC1_KNEE2_IP_SHIFT               5  /* AIF1DRC1_KNEE2_IP - [9:5] */
+#define WM8994_AIF1DRC1_KNEE2_IP_WIDTH               5  /* AIF1DRC1_KNEE2_IP - [9:5] */
+#define WM8994_AIF1DRC1_KNEE2_OP_MASK           0x001F  /* AIF1DRC1_KNEE2_OP - [4:0] */
+#define WM8994_AIF1DRC1_KNEE2_OP_SHIFT               0  /* AIF1DRC1_KNEE2_OP - [4:0] */
+#define WM8994_AIF1DRC1_KNEE2_OP_WIDTH               5  /* AIF1DRC1_KNEE2_OP - [4:0] */
+
+/*
+ * R1104 (0x450) - AIF1 DRC2 (1)
+ */
+#define WM8994_AIF1DRC2_SIG_DET_RMS_MASK        0xF800  /* AIF1DRC2_SIG_DET_RMS - [15:11] */
+#define WM8994_AIF1DRC2_SIG_DET_RMS_SHIFT           11  /* AIF1DRC2_SIG_DET_RMS - [15:11] */
+#define WM8994_AIF1DRC2_SIG_DET_RMS_WIDTH            5  /* AIF1DRC2_SIG_DET_RMS - [15:11] */
+#define WM8994_AIF1DRC2_SIG_DET_PK_MASK         0x0600  /* AIF1DRC2_SIG_DET_PK - [10:9] */
+#define WM8994_AIF1DRC2_SIG_DET_PK_SHIFT             9  /* AIF1DRC2_SIG_DET_PK - [10:9] */
+#define WM8994_AIF1DRC2_SIG_DET_PK_WIDTH             2  /* AIF1DRC2_SIG_DET_PK - [10:9] */
+#define WM8994_AIF1DRC2_NG_ENA                  0x0100  /* AIF1DRC2_NG_ENA */
+#define WM8994_AIF1DRC2_NG_ENA_MASK             0x0100  /* AIF1DRC2_NG_ENA */
+#define WM8994_AIF1DRC2_NG_ENA_SHIFT                 8  /* AIF1DRC2_NG_ENA */
+#define WM8994_AIF1DRC2_NG_ENA_WIDTH                 1  /* AIF1DRC2_NG_ENA */
+#define WM8994_AIF1DRC2_SIG_DET_MODE            0x0080  /* AIF1DRC2_SIG_DET_MODE */
+#define WM8994_AIF1DRC2_SIG_DET_MODE_MASK       0x0080  /* AIF1DRC2_SIG_DET_MODE */
+#define WM8994_AIF1DRC2_SIG_DET_MODE_SHIFT           7  /* AIF1DRC2_SIG_DET_MODE */
+#define WM8994_AIF1DRC2_SIG_DET_MODE_WIDTH           1  /* AIF1DRC2_SIG_DET_MODE */
+#define WM8994_AIF1DRC2_SIG_DET                 0x0040  /* AIF1DRC2_SIG_DET */
+#define WM8994_AIF1DRC2_SIG_DET_MASK            0x0040  /* AIF1DRC2_SIG_DET */
+#define WM8994_AIF1DRC2_SIG_DET_SHIFT                6  /* AIF1DRC2_SIG_DET */
+#define WM8994_AIF1DRC2_SIG_DET_WIDTH                1  /* AIF1DRC2_SIG_DET */
+#define WM8994_AIF1DRC2_KNEE2_OP_ENA            0x0020  /* AIF1DRC2_KNEE2_OP_ENA */
+#define WM8994_AIF1DRC2_KNEE2_OP_ENA_MASK       0x0020  /* AIF1DRC2_KNEE2_OP_ENA */
+#define WM8994_AIF1DRC2_KNEE2_OP_ENA_SHIFT           5  /* AIF1DRC2_KNEE2_OP_ENA */
+#define WM8994_AIF1DRC2_KNEE2_OP_ENA_WIDTH           1  /* AIF1DRC2_KNEE2_OP_ENA */
+#define WM8994_AIF1DRC2_QR                      0x0010  /* AIF1DRC2_QR */
+#define WM8994_AIF1DRC2_QR_MASK                 0x0010  /* AIF1DRC2_QR */
+#define WM8994_AIF1DRC2_QR_SHIFT                     4  /* AIF1DRC2_QR */
+#define WM8994_AIF1DRC2_QR_WIDTH                     1  /* AIF1DRC2_QR */
+#define WM8994_AIF1DRC2_ANTICLIP                0x0008  /* AIF1DRC2_ANTICLIP */
+#define WM8994_AIF1DRC2_ANTICLIP_MASK           0x0008  /* AIF1DRC2_ANTICLIP */
+#define WM8994_AIF1DRC2_ANTICLIP_SHIFT               3  /* AIF1DRC2_ANTICLIP */
+#define WM8994_AIF1DRC2_ANTICLIP_WIDTH               1  /* AIF1DRC2_ANTICLIP */
+#define WM8994_AIF1DAC2_DRC_ENA                 0x0004  /* AIF1DAC2_DRC_ENA */
+#define WM8994_AIF1DAC2_DRC_ENA_MASK            0x0004  /* AIF1DAC2_DRC_ENA */
+#define WM8994_AIF1DAC2_DRC_ENA_SHIFT                2  /* AIF1DAC2_DRC_ENA */
+#define WM8994_AIF1DAC2_DRC_ENA_WIDTH                1  /* AIF1DAC2_DRC_ENA */
+#define WM8994_AIF1ADC2L_DRC_ENA                0x0002  /* AIF1ADC2L_DRC_ENA */
+#define WM8994_AIF1ADC2L_DRC_ENA_MASK           0x0002  /* AIF1ADC2L_DRC_ENA */
+#define WM8994_AIF1ADC2L_DRC_ENA_SHIFT               1  /* AIF1ADC2L_DRC_ENA */
+#define WM8994_AIF1ADC2L_DRC_ENA_WIDTH               1  /* AIF1ADC2L_DRC_ENA */
+#define WM8994_AIF1ADC2R_DRC_ENA                0x0001  /* AIF1ADC2R_DRC_ENA */
+#define WM8994_AIF1ADC2R_DRC_ENA_MASK           0x0001  /* AIF1ADC2R_DRC_ENA */
+#define WM8994_AIF1ADC2R_DRC_ENA_SHIFT               0  /* AIF1ADC2R_DRC_ENA */
+#define WM8994_AIF1ADC2R_DRC_ENA_WIDTH               1  /* AIF1ADC2R_DRC_ENA */
+
+/*
+ * R1105 (0x451) - AIF1 DRC2 (2)
+ */
+#define WM8994_AIF1DRC2_ATK_MASK                0x1E00  /* AIF1DRC2_ATK - [12:9] */
+#define WM8994_AIF1DRC2_ATK_SHIFT                    9  /* AIF1DRC2_ATK - [12:9] */
+#define WM8994_AIF1DRC2_ATK_WIDTH                    4  /* AIF1DRC2_ATK - [12:9] */
+#define WM8994_AIF1DRC2_DCY_MASK                0x01E0  /* AIF1DRC2_DCY - [8:5] */
+#define WM8994_AIF1DRC2_DCY_SHIFT                    5  /* AIF1DRC2_DCY - [8:5] */
+#define WM8994_AIF1DRC2_DCY_WIDTH                    4  /* AIF1DRC2_DCY - [8:5] */
+#define WM8994_AIF1DRC2_MINGAIN_MASK            0x001C  /* AIF1DRC2_MINGAIN - [4:2] */
+#define WM8994_AIF1DRC2_MINGAIN_SHIFT                2  /* AIF1DRC2_MINGAIN - [4:2] */
+#define WM8994_AIF1DRC2_MINGAIN_WIDTH                3  /* AIF1DRC2_MINGAIN - [4:2] */
+#define WM8994_AIF1DRC2_MAXGAIN_MASK            0x0003  /* AIF1DRC2_MAXGAIN - [1:0] */
+#define WM8994_AIF1DRC2_MAXGAIN_SHIFT                0  /* AIF1DRC2_MAXGAIN - [1:0] */
+#define WM8994_AIF1DRC2_MAXGAIN_WIDTH                2  /* AIF1DRC2_MAXGAIN - [1:0] */
+
+/*
+ * R1106 (0x452) - AIF1 DRC2 (3)
+ */
+#define WM8994_AIF1DRC2_NG_MINGAIN_MASK         0xF000  /* AIF1DRC2_NG_MINGAIN - [15:12] */
+#define WM8994_AIF1DRC2_NG_MINGAIN_SHIFT            12  /* AIF1DRC2_NG_MINGAIN - [15:12] */
+#define WM8994_AIF1DRC2_NG_MINGAIN_WIDTH             4  /* AIF1DRC2_NG_MINGAIN - [15:12] */
+#define WM8994_AIF1DRC2_NG_EXP_MASK             0x0C00  /* AIF1DRC2_NG_EXP - [11:10] */
+#define WM8994_AIF1DRC2_NG_EXP_SHIFT                10  /* AIF1DRC2_NG_EXP - [11:10] */
+#define WM8994_AIF1DRC2_NG_EXP_WIDTH                 2  /* AIF1DRC2_NG_EXP - [11:10] */
+#define WM8994_AIF1DRC2_QR_THR_MASK             0x0300  /* AIF1DRC2_QR_THR - [9:8] */
+#define WM8994_AIF1DRC2_QR_THR_SHIFT                 8  /* AIF1DRC2_QR_THR - [9:8] */
+#define WM8994_AIF1DRC2_QR_THR_WIDTH                 2  /* AIF1DRC2_QR_THR - [9:8] */
+#define WM8994_AIF1DRC2_QR_DCY_MASK             0x00C0  /* AIF1DRC2_QR_DCY - [7:6] */
+#define WM8994_AIF1DRC2_QR_DCY_SHIFT                 6  /* AIF1DRC2_QR_DCY - [7:6] */
+#define WM8994_AIF1DRC2_QR_DCY_WIDTH                 2  /* AIF1DRC2_QR_DCY - [7:6] */
+#define WM8994_AIF1DRC2_HI_COMP_MASK            0x0038  /* AIF1DRC2_HI_COMP - [5:3] */
+#define WM8994_AIF1DRC2_HI_COMP_SHIFT                3  /* AIF1DRC2_HI_COMP - [5:3] */
+#define WM8994_AIF1DRC2_HI_COMP_WIDTH                3  /* AIF1DRC2_HI_COMP - [5:3] */
+#define WM8994_AIF1DRC2_LO_COMP_MASK            0x0007  /* AIF1DRC2_LO_COMP - [2:0] */
+#define WM8994_AIF1DRC2_LO_COMP_SHIFT                0  /* AIF1DRC2_LO_COMP - [2:0] */
+#define WM8994_AIF1DRC2_LO_COMP_WIDTH                3  /* AIF1DRC2_LO_COMP - [2:0] */
+
+/*
+ * R1107 (0x453) - AIF1 DRC2 (4)
+ */
+#define WM8994_AIF1DRC2_KNEE_IP_MASK            0x07E0  /* AIF1DRC2_KNEE_IP - [10:5] */
+#define WM8994_AIF1DRC2_KNEE_IP_SHIFT                5  /* AIF1DRC2_KNEE_IP - [10:5] */
+#define WM8994_AIF1DRC2_KNEE_IP_WIDTH                6  /* AIF1DRC2_KNEE_IP - [10:5] */
+#define WM8994_AIF1DRC2_KNEE_OP_MASK            0x001F  /* AIF1DRC2_KNEE_OP - [4:0] */
+#define WM8994_AIF1DRC2_KNEE_OP_SHIFT                0  /* AIF1DRC2_KNEE_OP - [4:0] */
+#define WM8994_AIF1DRC2_KNEE_OP_WIDTH                5  /* AIF1DRC2_KNEE_OP - [4:0] */
+
+/*
+ * R1108 (0x454) - AIF1 DRC2 (5)
+ */
+#define WM8994_AIF1DRC2_KNEE2_IP_MASK           0x03E0  /* AIF1DRC2_KNEE2_IP - [9:5] */
+#define WM8994_AIF1DRC2_KNEE2_IP_SHIFT               5  /* AIF1DRC2_KNEE2_IP - [9:5] */
+#define WM8994_AIF1DRC2_KNEE2_IP_WIDTH               5  /* AIF1DRC2_KNEE2_IP - [9:5] */
+#define WM8994_AIF1DRC2_KNEE2_OP_MASK           0x001F  /* AIF1DRC2_KNEE2_OP - [4:0] */
+#define WM8994_AIF1DRC2_KNEE2_OP_SHIFT               0  /* AIF1DRC2_KNEE2_OP - [4:0] */
+#define WM8994_AIF1DRC2_KNEE2_OP_WIDTH               5  /* AIF1DRC2_KNEE2_OP - [4:0] */
+
+/*
+ * R1152 (0x480) - AIF1 DAC1 EQ Gains (1)
+ */
+#define WM8994_AIF1DAC1_EQ_B1_GAIN_MASK         0xF800  /* AIF1DAC1_EQ_B1_GAIN - [15:11] */
+#define WM8994_AIF1DAC1_EQ_B1_GAIN_SHIFT            11  /* AIF1DAC1_EQ_B1_GAIN - [15:11] */
+#define WM8994_AIF1DAC1_EQ_B1_GAIN_WIDTH             5  /* AIF1DAC1_EQ_B1_GAIN - [15:11] */
+#define WM8994_AIF1DAC1_EQ_B2_GAIN_MASK         0x07C0  /* AIF1DAC1_EQ_B2_GAIN - [10:6] */
+#define WM8994_AIF1DAC1_EQ_B2_GAIN_SHIFT             6  /* AIF1DAC1_EQ_B2_GAIN - [10:6] */
+#define WM8994_AIF1DAC1_EQ_B2_GAIN_WIDTH             5  /* AIF1DAC1_EQ_B2_GAIN - [10:6] */
+#define WM8994_AIF1DAC1_EQ_B3_GAIN_MASK         0x003E  /* AIF1DAC1_EQ_B3_GAIN - [5:1] */
+#define WM8994_AIF1DAC1_EQ_B3_GAIN_SHIFT             1  /* AIF1DAC1_EQ_B3_GAIN - [5:1] */
+#define WM8994_AIF1DAC1_EQ_B3_GAIN_WIDTH             5  /* AIF1DAC1_EQ_B3_GAIN - [5:1] */
+#define WM8994_AIF1DAC1_EQ_ENA                  0x0001  /* AIF1DAC1_EQ_ENA */
+#define WM8994_AIF1DAC1_EQ_ENA_MASK             0x0001  /* AIF1DAC1_EQ_ENA */
+#define WM8994_AIF1DAC1_EQ_ENA_SHIFT                 0  /* AIF1DAC1_EQ_ENA */
+#define WM8994_AIF1DAC1_EQ_ENA_WIDTH                 1  /* AIF1DAC1_EQ_ENA */
+
+/*
+ * R1153 (0x481) - AIF1 DAC1 EQ Gains (2)
+ */
+#define WM8994_AIF1DAC1_EQ_B4_GAIN_MASK         0xF800  /* AIF1DAC1_EQ_B4_GAIN - [15:11] */
+#define WM8994_AIF1DAC1_EQ_B4_GAIN_SHIFT            11  /* AIF1DAC1_EQ_B4_GAIN - [15:11] */
+#define WM8994_AIF1DAC1_EQ_B4_GAIN_WIDTH             5  /* AIF1DAC1_EQ_B4_GAIN - [15:11] */
+#define WM8994_AIF1DAC1_EQ_B5_GAIN_MASK         0x07C0  /* AIF1DAC1_EQ_B5_GAIN - [10:6] */
+#define WM8994_AIF1DAC1_EQ_B5_GAIN_SHIFT             6  /* AIF1DAC1_EQ_B5_GAIN - [10:6] */
+#define WM8994_AIF1DAC1_EQ_B5_GAIN_WIDTH             5  /* AIF1DAC1_EQ_B5_GAIN - [10:6] */
+
+/*
+ * R1154 (0x482) - AIF1 DAC1 EQ Band 1 A
+ */
+#define WM8994_AIF1DAC1_EQ_B1_A_MASK            0xFFFF  /* AIF1DAC1_EQ_B1_A - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B1_A_SHIFT                0  /* AIF1DAC1_EQ_B1_A - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B1_A_WIDTH               16  /* AIF1DAC1_EQ_B1_A - [15:0] */
+
+/*
+ * R1155 (0x483) - AIF1 DAC1 EQ Band 1 B
+ */
+#define WM8994_AIF1DAC1_EQ_B1_B_MASK            0xFFFF  /* AIF1DAC1_EQ_B1_B - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B1_B_SHIFT                0  /* AIF1DAC1_EQ_B1_B - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B1_B_WIDTH               16  /* AIF1DAC1_EQ_B1_B - [15:0] */
+
+/*
+ * R1156 (0x484) - AIF1 DAC1 EQ Band 1 PG
+ */
+#define WM8994_AIF1DAC1_EQ_B1_PG_MASK           0xFFFF  /* AIF1DAC1_EQ_B1_PG - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B1_PG_SHIFT               0  /* AIF1DAC1_EQ_B1_PG - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B1_PG_WIDTH              16  /* AIF1DAC1_EQ_B1_PG - [15:0] */
+
+/*
+ * R1157 (0x485) - AIF1 DAC1 EQ Band 2 A
+ */
+#define WM8994_AIF1DAC1_EQ_B2_A_MASK            0xFFFF  /* AIF1DAC1_EQ_B2_A - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B2_A_SHIFT                0  /* AIF1DAC1_EQ_B2_A - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B2_A_WIDTH               16  /* AIF1DAC1_EQ_B2_A - [15:0] */
+
+/*
+ * R1158 (0x486) - AIF1 DAC1 EQ Band 2 B
+ */
+#define WM8994_AIF1DAC1_EQ_B2_B_MASK            0xFFFF  /* AIF1DAC1_EQ_B2_B - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B2_B_SHIFT                0  /* AIF1DAC1_EQ_B2_B - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B2_B_WIDTH               16  /* AIF1DAC1_EQ_B2_B - [15:0] */
+
+/*
+ * R1159 (0x487) - AIF1 DAC1 EQ Band 2 C
+ */
+#define WM8994_AIF1DAC1_EQ_B2_C_MASK            0xFFFF  /* AIF1DAC1_EQ_B2_C - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B2_C_SHIFT                0  /* AIF1DAC1_EQ_B2_C - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B2_C_WIDTH               16  /* AIF1DAC1_EQ_B2_C - [15:0] */
+
+/*
+ * R1160 (0x488) - AIF1 DAC1 EQ Band 2 PG
+ */
+#define WM8994_AIF1DAC1_EQ_B2_PG_MASK           0xFFFF  /* AIF1DAC1_EQ_B2_PG - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B2_PG_SHIFT               0  /* AIF1DAC1_EQ_B2_PG - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B2_PG_WIDTH              16  /* AIF1DAC1_EQ_B2_PG - [15:0] */
+
+/*
+ * R1161 (0x489) - AIF1 DAC1 EQ Band 3 A
+ */
+#define WM8994_AIF1DAC1_EQ_B3_A_MASK            0xFFFF  /* AIF1DAC1_EQ_B3_A - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B3_A_SHIFT                0  /* AIF1DAC1_EQ_B3_A - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B3_A_WIDTH               16  /* AIF1DAC1_EQ_B3_A - [15:0] */
+
+/*
+ * R1162 (0x48A) - AIF1 DAC1 EQ Band 3 B
+ */
+#define WM8994_AIF1DAC1_EQ_B3_B_MASK            0xFFFF  /* AIF1DAC1_EQ_B3_B - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B3_B_SHIFT                0  /* AIF1DAC1_EQ_B3_B - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B3_B_WIDTH               16  /* AIF1DAC1_EQ_B3_B - [15:0] */
+
+/*
+ * R1163 (0x48B) - AIF1 DAC1 EQ Band 3 C
+ */
+#define WM8994_AIF1DAC1_EQ_B3_C_MASK            0xFFFF  /* AIF1DAC1_EQ_B3_C - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B3_C_SHIFT                0  /* AIF1DAC1_EQ_B3_C - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B3_C_WIDTH               16  /* AIF1DAC1_EQ_B3_C - [15:0] */
+
+/*
+ * R1164 (0x48C) - AIF1 DAC1 EQ Band 3 PG
+ */
+#define WM8994_AIF1DAC1_EQ_B3_PG_MASK           0xFFFF  /* AIF1DAC1_EQ_B3_PG - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B3_PG_SHIFT               0  /* AIF1DAC1_EQ_B3_PG - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B3_PG_WIDTH              16  /* AIF1DAC1_EQ_B3_PG - [15:0] */
+
+/*
+ * R1165 (0x48D) - AIF1 DAC1 EQ Band 4 A
+ */
+#define WM8994_AIF1DAC1_EQ_B4_A_MASK            0xFFFF  /* AIF1DAC1_EQ_B4_A - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B4_A_SHIFT                0  /* AIF1DAC1_EQ_B4_A - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B4_A_WIDTH               16  /* AIF1DAC1_EQ_B4_A - [15:0] */
+
+/*
+ * R1166 (0x48E) - AIF1 DAC1 EQ Band 4 B
+ */
+#define WM8994_AIF1DAC1_EQ_B4_B_MASK            0xFFFF  /* AIF1DAC1_EQ_B4_B - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B4_B_SHIFT                0  /* AIF1DAC1_EQ_B4_B - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B4_B_WIDTH               16  /* AIF1DAC1_EQ_B4_B - [15:0] */
+
+/*
+ * R1167 (0x48F) - AIF1 DAC1 EQ Band 4 C
+ */
+#define WM8994_AIF1DAC1_EQ_B4_C_MASK            0xFFFF  /* AIF1DAC1_EQ_B4_C - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B4_C_SHIFT                0  /* AIF1DAC1_EQ_B4_C - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B4_C_WIDTH               16  /* AIF1DAC1_EQ_B4_C - [15:0] */
+
+/*
+ * R1168 (0x490) - AIF1 DAC1 EQ Band 4 PG
+ */
+#define WM8994_AIF1DAC1_EQ_B4_PG_MASK           0xFFFF  /* AIF1DAC1_EQ_B4_PG - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B4_PG_SHIFT               0  /* AIF1DAC1_EQ_B4_PG - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B4_PG_WIDTH              16  /* AIF1DAC1_EQ_B4_PG - [15:0] */
+
+/*
+ * R1169 (0x491) - AIF1 DAC1 EQ Band 5 A
+ */
+#define WM8994_AIF1DAC1_EQ_B5_A_MASK            0xFFFF  /* AIF1DAC1_EQ_B5_A - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B5_A_SHIFT                0  /* AIF1DAC1_EQ_B5_A - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B5_A_WIDTH               16  /* AIF1DAC1_EQ_B5_A - [15:0] */
+
+/*
+ * R1170 (0x492) - AIF1 DAC1 EQ Band 5 B
+ */
+#define WM8994_AIF1DAC1_EQ_B5_B_MASK            0xFFFF  /* AIF1DAC1_EQ_B5_B - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B5_B_SHIFT                0  /* AIF1DAC1_EQ_B5_B - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B5_B_WIDTH               16  /* AIF1DAC1_EQ_B5_B - [15:0] */
+
+/*
+ * R1171 (0x493) - AIF1 DAC1 EQ Band 5 PG
+ */
+#define WM8994_AIF1DAC1_EQ_B5_PG_MASK           0xFFFF  /* AIF1DAC1_EQ_B5_PG - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B5_PG_SHIFT               0  /* AIF1DAC1_EQ_B5_PG - [15:0] */
+#define WM8994_AIF1DAC1_EQ_B5_PG_WIDTH              16  /* AIF1DAC1_EQ_B5_PG - [15:0] */
+
+/*
+ * R1184 (0x4A0) - AIF1 DAC2 EQ Gains (1)
+ */
+#define WM8994_AIF1DAC2_EQ_B1_GAIN_MASK         0xF800  /* AIF1DAC2_EQ_B1_GAIN - [15:11] */
+#define WM8994_AIF1DAC2_EQ_B1_GAIN_SHIFT            11  /* AIF1DAC2_EQ_B1_GAIN - [15:11] */
+#define WM8994_AIF1DAC2_EQ_B1_GAIN_WIDTH             5  /* AIF1DAC2_EQ_B1_GAIN - [15:11] */
+#define WM8994_AIF1DAC2_EQ_B2_GAIN_MASK         0x07C0  /* AIF1DAC2_EQ_B2_GAIN - [10:6] */
+#define WM8994_AIF1DAC2_EQ_B2_GAIN_SHIFT             6  /* AIF1DAC2_EQ_B2_GAIN - [10:6] */
+#define WM8994_AIF1DAC2_EQ_B2_GAIN_WIDTH             5  /* AIF1DAC2_EQ_B2_GAIN - [10:6] */
+#define WM8994_AIF1DAC2_EQ_B3_GAIN_MASK         0x003E  /* AIF1DAC2_EQ_B3_GAIN - [5:1] */
+#define WM8994_AIF1DAC2_EQ_B3_GAIN_SHIFT             1  /* AIF1DAC2_EQ_B3_GAIN - [5:1] */
+#define WM8994_AIF1DAC2_EQ_B3_GAIN_WIDTH             5  /* AIF1DAC2_EQ_B3_GAIN - [5:1] */
+#define WM8994_AIF1DAC2_EQ_ENA                  0x0001  /* AIF1DAC2_EQ_ENA */
+#define WM8994_AIF1DAC2_EQ_ENA_MASK             0x0001  /* AIF1DAC2_EQ_ENA */
+#define WM8994_AIF1DAC2_EQ_ENA_SHIFT                 0  /* AIF1DAC2_EQ_ENA */
+#define WM8994_AIF1DAC2_EQ_ENA_WIDTH                 1  /* AIF1DAC2_EQ_ENA */
+
+/*
+ * R1185 (0x4A1) - AIF1 DAC2 EQ Gains (2)
+ */
+#define WM8994_AIF1DAC2_EQ_B4_GAIN_MASK         0xF800  /* AIF1DAC2_EQ_B4_GAIN - [15:11] */
+#define WM8994_AIF1DAC2_EQ_B4_GAIN_SHIFT            11  /* AIF1DAC2_EQ_B4_GAIN - [15:11] */
+#define WM8994_AIF1DAC2_EQ_B4_GAIN_WIDTH             5  /* AIF1DAC2_EQ_B4_GAIN - [15:11] */
+#define WM8994_AIF1DAC2_EQ_B5_GAIN_MASK         0x07C0  /* AIF1DAC2_EQ_B5_GAIN - [10:6] */
+#define WM8994_AIF1DAC2_EQ_B5_GAIN_SHIFT             6  /* AIF1DAC2_EQ_B5_GAIN - [10:6] */
+#define WM8994_AIF1DAC2_EQ_B5_GAIN_WIDTH             5  /* AIF1DAC2_EQ_B5_GAIN - [10:6] */
+
+/*
+ * R1186 (0x4A2) - AIF1 DAC2 EQ Band 1 A
+ */
+#define WM8994_AIF1DAC2_EQ_B1_A_MASK            0xFFFF  /* AIF1DAC2_EQ_B1_A - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B1_A_SHIFT                0  /* AIF1DAC2_EQ_B1_A - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B1_A_WIDTH               16  /* AIF1DAC2_EQ_B1_A - [15:0] */
+
+/*
+ * R1187 (0x4A3) - AIF1 DAC2 EQ Band 1 B
+ */
+#define WM8994_AIF1DAC2_EQ_B1_B_MASK            0xFFFF  /* AIF1DAC2_EQ_B1_B - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B1_B_SHIFT                0  /* AIF1DAC2_EQ_B1_B - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B1_B_WIDTH               16  /* AIF1DAC2_EQ_B1_B - [15:0] */
+
+/*
+ * R1188 (0x4A4) - AIF1 DAC2 EQ Band 1 PG
+ */
+#define WM8994_AIF1DAC2_EQ_B1_PG_MASK           0xFFFF  /* AIF1DAC2_EQ_B1_PG - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B1_PG_SHIFT               0  /* AIF1DAC2_EQ_B1_PG - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B1_PG_WIDTH              16  /* AIF1DAC2_EQ_B1_PG - [15:0] */
+
+/*
+ * R1189 (0x4A5) - AIF1 DAC2 EQ Band 2 A
+ */
+#define WM8994_AIF1DAC2_EQ_B2_A_MASK            0xFFFF  /* AIF1DAC2_EQ_B2_A - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B2_A_SHIFT                0  /* AIF1DAC2_EQ_B2_A - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B2_A_WIDTH               16  /* AIF1DAC2_EQ_B2_A - [15:0] */
+
+/*
+ * R1190 (0x4A6) - AIF1 DAC2 EQ Band 2 B
+ */
+#define WM8994_AIF1DAC2_EQ_B2_B_MASK            0xFFFF  /* AIF1DAC2_EQ_B2_B - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B2_B_SHIFT                0  /* AIF1DAC2_EQ_B2_B - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B2_B_WIDTH               16  /* AIF1DAC2_EQ_B2_B - [15:0] */
+
+/*
+ * R1191 (0x4A7) - AIF1 DAC2 EQ Band 2 C
+ */
+#define WM8994_AIF1DAC2_EQ_B2_C_MASK            0xFFFF  /* AIF1DAC2_EQ_B2_C - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B2_C_SHIFT                0  /* AIF1DAC2_EQ_B2_C - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B2_C_WIDTH               16  /* AIF1DAC2_EQ_B2_C - [15:0] */
+
+/*
+ * R1192 (0x4A8) - AIF1 DAC2 EQ Band 2 PG
+ */
+#define WM8994_AIF1DAC2_EQ_B2_PG_MASK           0xFFFF  /* AIF1DAC2_EQ_B2_PG - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B2_PG_SHIFT               0  /* AIF1DAC2_EQ_B2_PG - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B2_PG_WIDTH              16  /* AIF1DAC2_EQ_B2_PG - [15:0] */
+
+/*
+ * R1193 (0x4A9) - AIF1 DAC2 EQ Band 3 A
+ */
+#define WM8994_AIF1DAC2_EQ_B3_A_MASK            0xFFFF  /* AIF1DAC2_EQ_B3_A - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B3_A_SHIFT                0  /* AIF1DAC2_EQ_B3_A - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B3_A_WIDTH               16  /* AIF1DAC2_EQ_B3_A - [15:0] */
+
+/*
+ * R1194 (0x4AA) - AIF1 DAC2 EQ Band 3 B
+ */
+#define WM8994_AIF1DAC2_EQ_B3_B_MASK            0xFFFF  /* AIF1DAC2_EQ_B3_B - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B3_B_SHIFT                0  /* AIF1DAC2_EQ_B3_B - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B3_B_WIDTH               16  /* AIF1DAC2_EQ_B3_B - [15:0] */
+
+/*
+ * R1195 (0x4AB) - AIF1 DAC2 EQ Band 3 C
+ */
+#define WM8994_AIF1DAC2_EQ_B3_C_MASK            0xFFFF  /* AIF1DAC2_EQ_B3_C - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B3_C_SHIFT                0  /* AIF1DAC2_EQ_B3_C - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B3_C_WIDTH               16  /* AIF1DAC2_EQ_B3_C - [15:0] */
+
+/*
+ * R1196 (0x4AC) - AIF1 DAC2 EQ Band 3 PG
+ */
+#define WM8994_AIF1DAC2_EQ_B3_PG_MASK           0xFFFF  /* AIF1DAC2_EQ_B3_PG - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B3_PG_SHIFT               0  /* AIF1DAC2_EQ_B3_PG - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B3_PG_WIDTH              16  /* AIF1DAC2_EQ_B3_PG - [15:0] */
+
+/*
+ * R1197 (0x4AD) - AIF1 DAC2 EQ Band 4 A
+ */
+#define WM8994_AIF1DAC2_EQ_B4_A_MASK            0xFFFF  /* AIF1DAC2_EQ_B4_A - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B4_A_SHIFT                0  /* AIF1DAC2_EQ_B4_A - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B4_A_WIDTH               16  /* AIF1DAC2_EQ_B4_A - [15:0] */
+
+/*
+ * R1198 (0x4AE) - AIF1 DAC2 EQ Band 4 B
+ */
+#define WM8994_AIF1DAC2_EQ_B4_B_MASK            0xFFFF  /* AIF1DAC2_EQ_B4_B - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B4_B_SHIFT                0  /* AIF1DAC2_EQ_B4_B - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B4_B_WIDTH               16  /* AIF1DAC2_EQ_B4_B - [15:0] */
+
+/*
+ * R1199 (0x4AF) - AIF1 DAC2 EQ Band 4 C
+ */
+#define WM8994_AIF1DAC2_EQ_B4_C_MASK            0xFFFF  /* AIF1DAC2_EQ_B4_C - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B4_C_SHIFT                0  /* AIF1DAC2_EQ_B4_C - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B4_C_WIDTH               16  /* AIF1DAC2_EQ_B4_C - [15:0] */
+
+/*
+ * R1200 (0x4B0) - AIF1 DAC2 EQ Band 4 PG
+ */
+#define WM8994_AIF1DAC2_EQ_B4_PG_MASK           0xFFFF  /* AIF1DAC2_EQ_B4_PG - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B4_PG_SHIFT               0  /* AIF1DAC2_EQ_B4_PG - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B4_PG_WIDTH              16  /* AIF1DAC2_EQ_B4_PG - [15:0] */
+
+/*
+ * R1201 (0x4B1) - AIF1 DAC2 EQ Band 5 A
+ */
+#define WM8994_AIF1DAC2_EQ_B5_A_MASK            0xFFFF  /* AIF1DAC2_EQ_B5_A - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B5_A_SHIFT                0  /* AIF1DAC2_EQ_B5_A - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B5_A_WIDTH               16  /* AIF1DAC2_EQ_B5_A - [15:0] */
+
+/*
+ * R1202 (0x4B2) - AIF1 DAC2 EQ Band 5 B
+ */
+#define WM8994_AIF1DAC2_EQ_B5_B_MASK            0xFFFF  /* AIF1DAC2_EQ_B5_B - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B5_B_SHIFT                0  /* AIF1DAC2_EQ_B5_B - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B5_B_WIDTH               16  /* AIF1DAC2_EQ_B5_B - [15:0] */
+
+/*
+ * R1203 (0x4B3) - AIF1 DAC2 EQ Band 5 PG
+ */
+#define WM8994_AIF1DAC2_EQ_B5_PG_MASK           0xFFFF  /* AIF1DAC2_EQ_B5_PG - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B5_PG_SHIFT               0  /* AIF1DAC2_EQ_B5_PG - [15:0] */
+#define WM8994_AIF1DAC2_EQ_B5_PG_WIDTH              16  /* AIF1DAC2_EQ_B5_PG - [15:0] */
+
+/*
+ * R1280 (0x500) - AIF2 ADC Left Volume
+ */
+#define WM8994_AIF2ADC_VU                       0x0100  /* AIF2ADC_VU */
+#define WM8994_AIF2ADC_VU_MASK                  0x0100  /* AIF2ADC_VU */
+#define WM8994_AIF2ADC_VU_SHIFT                      8  /* AIF2ADC_VU */
+#define WM8994_AIF2ADC_VU_WIDTH                      1  /* AIF2ADC_VU */
+#define WM8994_AIF2ADCL_VOL_MASK                0x00FF  /* AIF2ADCL_VOL - [7:0] */
+#define WM8994_AIF2ADCL_VOL_SHIFT                    0  /* AIF2ADCL_VOL - [7:0] */
+#define WM8994_AIF2ADCL_VOL_WIDTH                    8  /* AIF2ADCL_VOL - [7:0] */
+
+/*
+ * R1281 (0x501) - AIF2 ADC Right Volume
+ */
+#define WM8994_AIF2ADC_VU                       0x0100  /* AIF2ADC_VU */
+#define WM8994_AIF2ADC_VU_MASK                  0x0100  /* AIF2ADC_VU */
+#define WM8994_AIF2ADC_VU_SHIFT                      8  /* AIF2ADC_VU */
+#define WM8994_AIF2ADC_VU_WIDTH                      1  /* AIF2ADC_VU */
+#define WM8994_AIF2ADCR_VOL_MASK                0x00FF  /* AIF2ADCR_VOL - [7:0] */
+#define WM8994_AIF2ADCR_VOL_SHIFT                    0  /* AIF2ADCR_VOL - [7:0] */
+#define WM8994_AIF2ADCR_VOL_WIDTH                    8  /* AIF2ADCR_VOL - [7:0] */
+
+/*
+ * R1282 (0x502) - AIF2 DAC Left Volume
+ */
+#define WM8994_AIF2DAC_VU                       0x0100  /* AIF2DAC_VU */
+#define WM8994_AIF2DAC_VU_MASK                  0x0100  /* AIF2DAC_VU */
+#define WM8994_AIF2DAC_VU_SHIFT                      8  /* AIF2DAC_VU */
+#define WM8994_AIF2DAC_VU_WIDTH                      1  /* AIF2DAC_VU */
+#define WM8994_AIF2DACL_VOL_MASK                0x00FF  /* AIF2DACL_VOL - [7:0] */
+#define WM8994_AIF2DACL_VOL_SHIFT                    0  /* AIF2DACL_VOL - [7:0] */
+#define WM8994_AIF2DACL_VOL_WIDTH                    8  /* AIF2DACL_VOL - [7:0] */
+
+/*
+ * R1283 (0x503) - AIF2 DAC Right Volume
+ */
+#define WM8994_AIF2DAC_VU                       0x0100  /* AIF2DAC_VU */
+#define WM8994_AIF2DAC_VU_MASK                  0x0100  /* AIF2DAC_VU */
+#define WM8994_AIF2DAC_VU_SHIFT                      8  /* AIF2DAC_VU */
+#define WM8994_AIF2DAC_VU_WIDTH                      1  /* AIF2DAC_VU */
+#define WM8994_AIF2DACR_VOL_MASK                0x00FF  /* AIF2DACR_VOL - [7:0] */
+#define WM8994_AIF2DACR_VOL_SHIFT                    0  /* AIF2DACR_VOL - [7:0] */
+#define WM8994_AIF2DACR_VOL_WIDTH                    8  /* AIF2DACR_VOL - [7:0] */
+
+/*
+ * R1296 (0x510) - AIF2 ADC Filters
+ */
+#define WM8994_AIF2ADC_4FS                      0x8000  /* AIF2ADC_4FS */
+#define WM8994_AIF2ADC_4FS_MASK                 0x8000  /* AIF2ADC_4FS */
+#define WM8994_AIF2ADC_4FS_SHIFT                    15  /* AIF2ADC_4FS */
+#define WM8994_AIF2ADC_4FS_WIDTH                     1  /* AIF2ADC_4FS */
+#define WM8994_AIF2ADC_HPF_CUT_MASK             0x6000  /* AIF2ADC_HPF_CUT - [14:13] */
+#define WM8994_AIF2ADC_HPF_CUT_SHIFT                13  /* AIF2ADC_HPF_CUT - [14:13] */
+#define WM8994_AIF2ADC_HPF_CUT_WIDTH                 2  /* AIF2ADC_HPF_CUT - [14:13] */
+#define WM8994_AIF2ADCL_HPF                     0x1000  /* AIF2ADCL_HPF */
+#define WM8994_AIF2ADCL_HPF_MASK                0x1000  /* AIF2ADCL_HPF */
+#define WM8994_AIF2ADCL_HPF_SHIFT                   12  /* AIF2ADCL_HPF */
+#define WM8994_AIF2ADCL_HPF_WIDTH                    1  /* AIF2ADCL_HPF */
+#define WM8994_AIF2ADCR_HPF                     0x0800  /* AIF2ADCR_HPF */
+#define WM8994_AIF2ADCR_HPF_MASK                0x0800  /* AIF2ADCR_HPF */
+#define WM8994_AIF2ADCR_HPF_SHIFT                   11  /* AIF2ADCR_HPF */
+#define WM8994_AIF2ADCR_HPF_WIDTH                    1  /* AIF2ADCR_HPF */
+
+/*
+ * R1312 (0x520) - AIF2 DAC Filters (1)
+ */
+#define WM8994_AIF2DAC_MUTE                     0x0200  /* AIF2DAC_MUTE */
+#define WM8994_AIF2DAC_MUTE_MASK                0x0200  /* AIF2DAC_MUTE */
+#define WM8994_AIF2DAC_MUTE_SHIFT                    9  /* AIF2DAC_MUTE */
+#define WM8994_AIF2DAC_MUTE_WIDTH                    1  /* AIF2DAC_MUTE */
+#define WM8994_AIF2DAC_MONO                     0x0080  /* AIF2DAC_MONO */
+#define WM8994_AIF2DAC_MONO_MASK                0x0080  /* AIF2DAC_MONO */
+#define WM8994_AIF2DAC_MONO_SHIFT                    7  /* AIF2DAC_MONO */
+#define WM8994_AIF2DAC_MONO_WIDTH                    1  /* AIF2DAC_MONO */
+#define WM8994_AIF2DAC_MUTERATE                 0x0020  /* AIF2DAC_MUTERATE */
+#define WM8994_AIF2DAC_MUTERATE_MASK            0x0020  /* AIF2DAC_MUTERATE */
+#define WM8994_AIF2DAC_MUTERATE_SHIFT                5  /* AIF2DAC_MUTERATE */
+#define WM8994_AIF2DAC_MUTERATE_WIDTH                1  /* AIF2DAC_MUTERATE */
+#define WM8994_AIF2DAC_UNMUTE_RAMP              0x0010  /* AIF2DAC_UNMUTE_RAMP */
+#define WM8994_AIF2DAC_UNMUTE_RAMP_MASK         0x0010  /* AIF2DAC_UNMUTE_RAMP */
+#define WM8994_AIF2DAC_UNMUTE_RAMP_SHIFT             4  /* AIF2DAC_UNMUTE_RAMP */
+#define WM8994_AIF2DAC_UNMUTE_RAMP_WIDTH             1  /* AIF2DAC_UNMUTE_RAMP */
+#define WM8994_AIF2DAC_DEEMP_MASK               0x0006  /* AIF2DAC_DEEMP - [2:1] */
+#define WM8994_AIF2DAC_DEEMP_SHIFT                   1  /* AIF2DAC_DEEMP - [2:1] */
+#define WM8994_AIF2DAC_DEEMP_WIDTH                   2  /* AIF2DAC_DEEMP - [2:1] */
+
+/*
+ * R1313 (0x521) - AIF2 DAC Filters (2)
+ */
+#define WM8994_AIF2DAC_3D_GAIN_MASK             0x3E00  /* AIF2DAC_3D_GAIN - [13:9] */
+#define WM8994_AIF2DAC_3D_GAIN_SHIFT                 9  /* AIF2DAC_3D_GAIN - [13:9] */
+#define WM8994_AIF2DAC_3D_GAIN_WIDTH                 5  /* AIF2DAC_3D_GAIN - [13:9] */
+#define WM8994_AIF2DAC_3D_ENA                   0x0100  /* AIF2DAC_3D_ENA */
+#define WM8994_AIF2DAC_3D_ENA_MASK              0x0100  /* AIF2DAC_3D_ENA */
+#define WM8994_AIF2DAC_3D_ENA_SHIFT                  8  /* AIF2DAC_3D_ENA */
+#define WM8994_AIF2DAC_3D_ENA_WIDTH                  1  /* AIF2DAC_3D_ENA */
+
+/*
+ * R1328 (0x530) - AIF2 DAC Noise Gate
+ */
+#define WM8958_AIF2DAC_NG_HLD_MASK              0x0060  /* AIF2DAC_NG_HLD - [6:5] */
+#define WM8958_AIF2DAC_NG_HLD_SHIFT                  5  /* AIF2DAC_NG_HLD - [6:5] */
+#define WM8958_AIF2DAC_NG_HLD_WIDTH                  2  /* AIF2DAC_NG_HLD - [6:5] */
+#define WM8958_AIF2DAC_NG_THR_MASK              0x000E  /* AIF2DAC_NG_THR - [3:1] */
+#define WM8958_AIF2DAC_NG_THR_SHIFT                  1  /* AIF2DAC_NG_THR - [3:1] */
+#define WM8958_AIF2DAC_NG_THR_WIDTH                  3  /* AIF2DAC_NG_THR - [3:1] */
+#define WM8958_AIF2DAC_NG_ENA                   0x0001  /* AIF2DAC_NG_ENA */
+#define WM8958_AIF2DAC_NG_ENA_MASK              0x0001  /* AIF2DAC_NG_ENA */
+#define WM8958_AIF2DAC_NG_ENA_SHIFT                  0  /* AIF2DAC_NG_ENA */
+#define WM8958_AIF2DAC_NG_ENA_WIDTH                  1  /* AIF2DAC_NG_ENA */
+
+/*
+ * R1344 (0x540) - AIF2 DRC (1)
+ */
+#define WM8994_AIF2DRC_SIG_DET_RMS_MASK         0xF800  /* AIF2DRC_SIG_DET_RMS - [15:11] */
+#define WM8994_AIF2DRC_SIG_DET_RMS_SHIFT            11  /* AIF2DRC_SIG_DET_RMS - [15:11] */
+#define WM8994_AIF2DRC_SIG_DET_RMS_WIDTH             5  /* AIF2DRC_SIG_DET_RMS - [15:11] */
+#define WM8994_AIF2DRC_SIG_DET_PK_MASK          0x0600  /* AIF2DRC_SIG_DET_PK - [10:9] */
+#define WM8994_AIF2DRC_SIG_DET_PK_SHIFT              9  /* AIF2DRC_SIG_DET_PK - [10:9] */
+#define WM8994_AIF2DRC_SIG_DET_PK_WIDTH              2  /* AIF2DRC_SIG_DET_PK - [10:9] */
+#define WM8994_AIF2DRC_NG_ENA                   0x0100  /* AIF2DRC_NG_ENA */
+#define WM8994_AIF2DRC_NG_ENA_MASK              0x0100  /* AIF2DRC_NG_ENA */
+#define WM8994_AIF2DRC_NG_ENA_SHIFT                  8  /* AIF2DRC_NG_ENA */
+#define WM8994_AIF2DRC_NG_ENA_WIDTH                  1  /* AIF2DRC_NG_ENA */
+#define WM8994_AIF2DRC_SIG_DET_MODE             0x0080  /* AIF2DRC_SIG_DET_MODE */
+#define WM8994_AIF2DRC_SIG_DET_MODE_MASK        0x0080  /* AIF2DRC_SIG_DET_MODE */
+#define WM8994_AIF2DRC_SIG_DET_MODE_SHIFT            7  /* AIF2DRC_SIG_DET_MODE */
+#define WM8994_AIF2DRC_SIG_DET_MODE_WIDTH            1  /* AIF2DRC_SIG_DET_MODE */
+#define WM8994_AIF2DRC_SIG_DET                  0x0040  /* AIF2DRC_SIG_DET */
+#define WM8994_AIF2DRC_SIG_DET_MASK             0x0040  /* AIF2DRC_SIG_DET */
+#define WM8994_AIF2DRC_SIG_DET_SHIFT                 6  /* AIF2DRC_SIG_DET */
+#define WM8994_AIF2DRC_SIG_DET_WIDTH                 1  /* AIF2DRC_SIG_DET */
+#define WM8994_AIF2DRC_KNEE2_OP_ENA             0x0020  /* AIF2DRC_KNEE2_OP_ENA */
+#define WM8994_AIF2DRC_KNEE2_OP_ENA_MASK        0x0020  /* AIF2DRC_KNEE2_OP_ENA */
+#define WM8994_AIF2DRC_KNEE2_OP_ENA_SHIFT            5  /* AIF2DRC_KNEE2_OP_ENA */
+#define WM8994_AIF2DRC_KNEE2_OP_ENA_WIDTH            1  /* AIF2DRC_KNEE2_OP_ENA */
+#define WM8994_AIF2DRC_QR                       0x0010  /* AIF2DRC_QR */
+#define WM8994_AIF2DRC_QR_MASK                  0x0010  /* AIF2DRC_QR */
+#define WM8994_AIF2DRC_QR_SHIFT                      4  /* AIF2DRC_QR */
+#define WM8994_AIF2DRC_QR_WIDTH                      1  /* AIF2DRC_QR */
+#define WM8994_AIF2DRC_ANTICLIP                 0x0008  /* AIF2DRC_ANTICLIP */
+#define WM8994_AIF2DRC_ANTICLIP_MASK            0x0008  /* AIF2DRC_ANTICLIP */
+#define WM8994_AIF2DRC_ANTICLIP_SHIFT                3  /* AIF2DRC_ANTICLIP */
+#define WM8994_AIF2DRC_ANTICLIP_WIDTH                1  /* AIF2DRC_ANTICLIP */
+#define WM8994_AIF2DAC_DRC_ENA                  0x0004  /* AIF2DAC_DRC_ENA */
+#define WM8994_AIF2DAC_DRC_ENA_MASK             0x0004  /* AIF2DAC_DRC_ENA */
+#define WM8994_AIF2DAC_DRC_ENA_SHIFT                 2  /* AIF2DAC_DRC_ENA */
+#define WM8994_AIF2DAC_DRC_ENA_WIDTH                 1  /* AIF2DAC_DRC_ENA */
+#define WM8994_AIF2ADCL_DRC_ENA                 0x0002  /* AIF2ADCL_DRC_ENA */
+#define WM8994_AIF2ADCL_DRC_ENA_MASK            0x0002  /* AIF2ADCL_DRC_ENA */
+#define WM8994_AIF2ADCL_DRC_ENA_SHIFT                1  /* AIF2ADCL_DRC_ENA */
+#define WM8994_AIF2ADCL_DRC_ENA_WIDTH                1  /* AIF2ADCL_DRC_ENA */
+#define WM8994_AIF2ADCR_DRC_ENA                 0x0001  /* AIF2ADCR_DRC_ENA */
+#define WM8994_AIF2ADCR_DRC_ENA_MASK            0x0001  /* AIF2ADCR_DRC_ENA */
+#define WM8994_AIF2ADCR_DRC_ENA_SHIFT                0  /* AIF2ADCR_DRC_ENA */
+#define WM8994_AIF2ADCR_DRC_ENA_WIDTH                1  /* AIF2ADCR_DRC_ENA */
+
+/*
+ * R1345 (0x541) - AIF2 DRC (2)
+ */
+#define WM8994_AIF2DRC_ATK_MASK                 0x1E00  /* AIF2DRC_ATK - [12:9] */
+#define WM8994_AIF2DRC_ATK_SHIFT                     9  /* AIF2DRC_ATK - [12:9] */
+#define WM8994_AIF2DRC_ATK_WIDTH                     4  /* AIF2DRC_ATK - [12:9] */
+#define WM8994_AIF2DRC_DCY_MASK                 0x01E0  /* AIF2DRC_DCY - [8:5] */
+#define WM8994_AIF2DRC_DCY_SHIFT                     5  /* AIF2DRC_DCY - [8:5] */
+#define WM8994_AIF2DRC_DCY_WIDTH                     4  /* AIF2DRC_DCY - [8:5] */
+#define WM8994_AIF2DRC_MINGAIN_MASK             0x001C  /* AIF2DRC_MINGAIN - [4:2] */
+#define WM8994_AIF2DRC_MINGAIN_SHIFT                 2  /* AIF2DRC_MINGAIN - [4:2] */
+#define WM8994_AIF2DRC_MINGAIN_WIDTH                 3  /* AIF2DRC_MINGAIN - [4:2] */
+#define WM8994_AIF2DRC_MAXGAIN_MASK             0x0003  /* AIF2DRC_MAXGAIN - [1:0] */
+#define WM8994_AIF2DRC_MAXGAIN_SHIFT                 0  /* AIF2DRC_MAXGAIN - [1:0] */
+#define WM8994_AIF2DRC_MAXGAIN_WIDTH                 2  /* AIF2DRC_MAXGAIN - [1:0] */
+
+/*
+ * R1346 (0x542) - AIF2 DRC (3)
+ */
+#define WM8994_AIF2DRC_NG_MINGAIN_MASK          0xF000  /* AIF2DRC_NG_MINGAIN - [15:12] */
+#define WM8994_AIF2DRC_NG_MINGAIN_SHIFT             12  /* AIF2DRC_NG_MINGAIN - [15:12] */
+#define WM8994_AIF2DRC_NG_MINGAIN_WIDTH              4  /* AIF2DRC_NG_MINGAIN - [15:12] */
+#define WM8994_AIF2DRC_NG_EXP_MASK              0x0C00  /* AIF2DRC_NG_EXP - [11:10] */
+#define WM8994_AIF2DRC_NG_EXP_SHIFT                 10  /* AIF2DRC_NG_EXP - [11:10] */
+#define WM8994_AIF2DRC_NG_EXP_WIDTH                  2  /* AIF2DRC_NG_EXP - [11:10] */
+#define WM8994_AIF2DRC_QR_THR_MASK              0x0300  /* AIF2DRC_QR_THR - [9:8] */
+#define WM8994_AIF2DRC_QR_THR_SHIFT                  8  /* AIF2DRC_QR_THR - [9:8] */
+#define WM8994_AIF2DRC_QR_THR_WIDTH                  2  /* AIF2DRC_QR_THR - [9:8] */
+#define WM8994_AIF2DRC_QR_DCY_MASK              0x00C0  /* AIF2DRC_QR_DCY - [7:6] */
+#define WM8994_AIF2DRC_QR_DCY_SHIFT                  6  /* AIF2DRC_QR_DCY - [7:6] */
+#define WM8994_AIF2DRC_QR_DCY_WIDTH                  2  /* AIF2DRC_QR_DCY - [7:6] */
+#define WM8994_AIF2DRC_HI_COMP_MASK             0x0038  /* AIF2DRC_HI_COMP - [5:3] */
+#define WM8994_AIF2DRC_HI_COMP_SHIFT                 3  /* AIF2DRC_HI_COMP - [5:3] */
+#define WM8994_AIF2DRC_HI_COMP_WIDTH                 3  /* AIF2DRC_HI_COMP - [5:3] */
+#define WM8994_AIF2DRC_LO_COMP_MASK             0x0007  /* AIF2DRC_LO_COMP - [2:0] */
+#define WM8994_AIF2DRC_LO_COMP_SHIFT                 0  /* AIF2DRC_LO_COMP - [2:0] */
+#define WM8994_AIF2DRC_LO_COMP_WIDTH                 3  /* AIF2DRC_LO_COMP - [2:0] */
+
+/*
+ * R1347 (0x543) - AIF2 DRC (4)
+ */
+#define WM8994_AIF2DRC_KNEE_IP_MASK             0x07E0  /* AIF2DRC_KNEE_IP - [10:5] */
+#define WM8994_AIF2DRC_KNEE_IP_SHIFT                 5  /* AIF2DRC_KNEE_IP - [10:5] */
+#define WM8994_AIF2DRC_KNEE_IP_WIDTH                 6  /* AIF2DRC_KNEE_IP - [10:5] */
+#define WM8994_AIF2DRC_KNEE_OP_MASK             0x001F  /* AIF2DRC_KNEE_OP - [4:0] */
+#define WM8994_AIF2DRC_KNEE_OP_SHIFT                 0  /* AIF2DRC_KNEE_OP - [4:0] */
+#define WM8994_AIF2DRC_KNEE_OP_WIDTH                 5  /* AIF2DRC_KNEE_OP - [4:0] */
+
+/*
+ * R1348 (0x544) - AIF2 DRC (5)
+ */
+#define WM8994_AIF2DRC_KNEE2_IP_MASK            0x03E0  /* AIF2DRC_KNEE2_IP - [9:5] */
+#define WM8994_AIF2DRC_KNEE2_IP_SHIFT                5  /* AIF2DRC_KNEE2_IP - [9:5] */
+#define WM8994_AIF2DRC_KNEE2_IP_WIDTH                5  /* AIF2DRC_KNEE2_IP - [9:5] */
+#define WM8994_AIF2DRC_KNEE2_OP_MASK            0x001F  /* AIF2DRC_KNEE2_OP - [4:0] */
+#define WM8994_AIF2DRC_KNEE2_OP_SHIFT                0  /* AIF2DRC_KNEE2_OP - [4:0] */
+#define WM8994_AIF2DRC_KNEE2_OP_WIDTH                5  /* AIF2DRC_KNEE2_OP - [4:0] */
+
+/*
+ * R1408 (0x580) - AIF2 EQ Gains (1)
+ */
+#define WM8994_AIF2DAC_EQ_B1_GAIN_MASK          0xF800  /* AIF2DAC_EQ_B1_GAIN - [15:11] */
+#define WM8994_AIF2DAC_EQ_B1_GAIN_SHIFT             11  /* AIF2DAC_EQ_B1_GAIN - [15:11] */
+#define WM8994_AIF2DAC_EQ_B1_GAIN_WIDTH              5  /* AIF2DAC_EQ_B1_GAIN - [15:11] */
+#define WM8994_AIF2DAC_EQ_B2_GAIN_MASK          0x07C0  /* AIF2DAC_EQ_B2_GAIN - [10:6] */
+#define WM8994_AIF2DAC_EQ_B2_GAIN_SHIFT              6  /* AIF2DAC_EQ_B2_GAIN - [10:6] */
+#define WM8994_AIF2DAC_EQ_B2_GAIN_WIDTH              5  /* AIF2DAC_EQ_B2_GAIN - [10:6] */
+#define WM8994_AIF2DAC_EQ_B3_GAIN_MASK          0x003E  /* AIF2DAC_EQ_B3_GAIN - [5:1] */
+#define WM8994_AIF2DAC_EQ_B3_GAIN_SHIFT              1  /* AIF2DAC_EQ_B3_GAIN - [5:1] */
+#define WM8994_AIF2DAC_EQ_B3_GAIN_WIDTH              5  /* AIF2DAC_EQ_B3_GAIN - [5:1] */
+#define WM8994_AIF2DAC_EQ_ENA                   0x0001  /* AIF2DAC_EQ_ENA */
+#define WM8994_AIF2DAC_EQ_ENA_MASK              0x0001  /* AIF2DAC_EQ_ENA */
+#define WM8994_AIF2DAC_EQ_ENA_SHIFT                  0  /* AIF2DAC_EQ_ENA */
+#define WM8994_AIF2DAC_EQ_ENA_WIDTH                  1  /* AIF2DAC_EQ_ENA */
+
+/*
+ * R1409 (0x581) - AIF2 EQ Gains (2)
+ */
+#define WM8994_AIF2DAC_EQ_B4_GAIN_MASK          0xF800  /* AIF2DAC_EQ_B4_GAIN - [15:11] */
+#define WM8994_AIF2DAC_EQ_B4_GAIN_SHIFT             11  /* AIF2DAC_EQ_B4_GAIN - [15:11] */
+#define WM8994_AIF2DAC_EQ_B4_GAIN_WIDTH              5  /* AIF2DAC_EQ_B4_GAIN - [15:11] */
+#define WM8994_AIF2DAC_EQ_B5_GAIN_MASK          0x07C0  /* AIF2DAC_EQ_B5_GAIN - [10:6] */
+#define WM8994_AIF2DAC_EQ_B5_GAIN_SHIFT              6  /* AIF2DAC_EQ_B5_GAIN - [10:6] */
+#define WM8994_AIF2DAC_EQ_B5_GAIN_WIDTH              5  /* AIF2DAC_EQ_B5_GAIN - [10:6] */
+
+/*
+ * R1410 (0x582) - AIF2 EQ Band 1 A
+ */
+#define WM8994_AIF2DAC_EQ_B1_A_MASK             0xFFFF  /* AIF2DAC_EQ_B1_A - [15:0] */
+#define WM8994_AIF2DAC_EQ_B1_A_SHIFT                 0  /* AIF2DAC_EQ_B1_A - [15:0] */
+#define WM8994_AIF2DAC_EQ_B1_A_WIDTH                16  /* AIF2DAC_EQ_B1_A - [15:0] */
+
+/*
+ * R1411 (0x583) - AIF2 EQ Band 1 B
+ */
+#define WM8994_AIF2DAC_EQ_B1_B_MASK             0xFFFF  /* AIF2DAC_EQ_B1_B - [15:0] */
+#define WM8994_AIF2DAC_EQ_B1_B_SHIFT                 0  /* AIF2DAC_EQ_B1_B - [15:0] */
+#define WM8994_AIF2DAC_EQ_B1_B_WIDTH                16  /* AIF2DAC_EQ_B1_B - [15:0] */
+
+/*
+ * R1412 (0x584) - AIF2 EQ Band 1 PG
+ */
+#define WM8994_AIF2DAC_EQ_B1_PG_MASK            0xFFFF  /* AIF2DAC_EQ_B1_PG - [15:0] */
+#define WM8994_AIF2DAC_EQ_B1_PG_SHIFT                0  /* AIF2DAC_EQ_B1_PG - [15:0] */
+#define WM8994_AIF2DAC_EQ_B1_PG_WIDTH               16  /* AIF2DAC_EQ_B1_PG - [15:0] */
+
+/*
+ * R1413 (0x585) - AIF2 EQ Band 2 A
+ */
+#define WM8994_AIF2DAC_EQ_B2_A_MASK             0xFFFF  /* AIF2DAC_EQ_B2_A - [15:0] */
+#define WM8994_AIF2DAC_EQ_B2_A_SHIFT                 0  /* AIF2DAC_EQ_B2_A - [15:0] */
+#define WM8994_AIF2DAC_EQ_B2_A_WIDTH                16  /* AIF2DAC_EQ_B2_A - [15:0] */
+
+/*
+ * R1414 (0x586) - AIF2 EQ Band 2 B
+ */
+#define WM8994_AIF2DAC_EQ_B2_B_MASK             0xFFFF  /* AIF2DAC_EQ_B2_B - [15:0] */
+#define WM8994_AIF2DAC_EQ_B2_B_SHIFT                 0  /* AIF2DAC_EQ_B2_B - [15:0] */
+#define WM8994_AIF2DAC_EQ_B2_B_WIDTH                16  /* AIF2DAC_EQ_B2_B - [15:0] */
+
+/*
+ * R1415 (0x587) - AIF2 EQ Band 2 C
+ */
+#define WM8994_AIF2DAC_EQ_B2_C_MASK             0xFFFF  /* AIF2DAC_EQ_B2_C - [15:0] */
+#define WM8994_AIF2DAC_EQ_B2_C_SHIFT                 0  /* AIF2DAC_EQ_B2_C - [15:0] */
+#define WM8994_AIF2DAC_EQ_B2_C_WIDTH                16  /* AIF2DAC_EQ_B2_C - [15:0] */
+
+/*
+ * R1416 (0x588) - AIF2 EQ Band 2 PG
+ */
+#define WM8994_AIF2DAC_EQ_B2_PG_MASK            0xFFFF  /* AIF2DAC_EQ_B2_PG - [15:0] */
+#define WM8994_AIF2DAC_EQ_B2_PG_SHIFT                0  /* AIF2DAC_EQ_B2_PG - [15:0] */
+#define WM8994_AIF2DAC_EQ_B2_PG_WIDTH               16  /* AIF2DAC_EQ_B2_PG - [15:0] */
+
+/*
+ * R1417 (0x589) - AIF2 EQ Band 3 A
+ */
+#define WM8994_AIF2DAC_EQ_B3_A_MASK             0xFFFF  /* AIF2DAC_EQ_B3_A - [15:0] */
+#define WM8994_AIF2DAC_EQ_B3_A_SHIFT                 0  /* AIF2DAC_EQ_B3_A - [15:0] */
+#define WM8994_AIF2DAC_EQ_B3_A_WIDTH                16  /* AIF2DAC_EQ_B3_A - [15:0] */
+
+/*
+ * R1418 (0x58A) - AIF2 EQ Band 3 B
+ */
+#define WM8994_AIF2DAC_EQ_B3_B_MASK             0xFFFF  /* AIF2DAC_EQ_B3_B - [15:0] */
+#define WM8994_AIF2DAC_EQ_B3_B_SHIFT                 0  /* AIF2DAC_EQ_B3_B - [15:0] */
+#define WM8994_AIF2DAC_EQ_B3_B_WIDTH                16  /* AIF2DAC_EQ_B3_B - [15:0] */
+
+/*
+ * R1419 (0x58B) - AIF2 EQ Band 3 C
+ */
+#define WM8994_AIF2DAC_EQ_B3_C_MASK             0xFFFF  /* AIF2DAC_EQ_B3_C - [15:0] */
+#define WM8994_AIF2DAC_EQ_B3_C_SHIFT                 0  /* AIF2DAC_EQ_B3_C - [15:0] */
+#define WM8994_AIF2DAC_EQ_B3_C_WIDTH                16  /* AIF2DAC_EQ_B3_C - [15:0] */
+
+/*
+ * R1420 (0x58C) - AIF2 EQ Band 3 PG
+ */
+#define WM8994_AIF2DAC_EQ_B3_PG_MASK            0xFFFF  /* AIF2DAC_EQ_B3_PG - [15:0] */
+#define WM8994_AIF2DAC_EQ_B3_PG_SHIFT                0  /* AIF2DAC_EQ_B3_PG - [15:0] */
+#define WM8994_AIF2DAC_EQ_B3_PG_WIDTH               16  /* AIF2DAC_EQ_B3_PG - [15:0] */
+
+/*
+ * R1421 (0x58D) - AIF2 EQ Band 4 A
+ */
+#define WM8994_AIF2DAC_EQ_B4_A_MASK             0xFFFF  /* AIF2DAC_EQ_B4_A - [15:0] */
+#define WM8994_AIF2DAC_EQ_B4_A_SHIFT                 0  /* AIF2DAC_EQ_B4_A - [15:0] */
+#define WM8994_AIF2DAC_EQ_B4_A_WIDTH                16  /* AIF2DAC_EQ_B4_A - [15:0] */
+
+/*
+ * R1422 (0x58E) - AIF2 EQ Band 4 B
+ */
+#define WM8994_AIF2DAC_EQ_B4_B_MASK             0xFFFF  /* AIF2DAC_EQ_B4_B - [15:0] */
+#define WM8994_AIF2DAC_EQ_B4_B_SHIFT                 0  /* AIF2DAC_EQ_B4_B - [15:0] */
+#define WM8994_AIF2DAC_EQ_B4_B_WIDTH                16  /* AIF2DAC_EQ_B4_B - [15:0] */
+
+/*
+ * R1423 (0x58F) - AIF2 EQ Band 4 C
+ */
+#define WM8994_AIF2DAC_EQ_B4_C_MASK             0xFFFF  /* AIF2DAC_EQ_B4_C - [15:0] */
+#define WM8994_AIF2DAC_EQ_B4_C_SHIFT                 0  /* AIF2DAC_EQ_B4_C - [15:0] */
+#define WM8994_AIF2DAC_EQ_B4_C_WIDTH                16  /* AIF2DAC_EQ_B4_C - [15:0] */
+
+/*
+ * R1424 (0x590) - AIF2 EQ Band 4 PG
+ */
+#define WM8994_AIF2DAC_EQ_B4_PG_MASK            0xFFFF  /* AIF2DAC_EQ_B4_PG - [15:0] */
+#define WM8994_AIF2DAC_EQ_B4_PG_SHIFT                0  /* AIF2DAC_EQ_B4_PG - [15:0] */
+#define WM8994_AIF2DAC_EQ_B4_PG_WIDTH               16  /* AIF2DAC_EQ_B4_PG - [15:0] */
+
+/*
+ * R1425 (0x591) - AIF2 EQ Band 5 A
+ */
+#define WM8994_AIF2DAC_EQ_B5_A_MASK             0xFFFF  /* AIF2DAC_EQ_B5_A - [15:0] */
+#define WM8994_AIF2DAC_EQ_B5_A_SHIFT                 0  /* AIF2DAC_EQ_B5_A - [15:0] */
+#define WM8994_AIF2DAC_EQ_B5_A_WIDTH                16  /* AIF2DAC_EQ_B5_A - [15:0] */
+
+/*
+ * R1426 (0x592) - AIF2 EQ Band 5 B
+ */
+#define WM8994_AIF2DAC_EQ_B5_B_MASK             0xFFFF  /* AIF2DAC_EQ_B5_B - [15:0] */
+#define WM8994_AIF2DAC_EQ_B5_B_SHIFT                 0  /* AIF2DAC_EQ_B5_B - [15:0] */
+#define WM8994_AIF2DAC_EQ_B5_B_WIDTH                16  /* AIF2DAC_EQ_B5_B - [15:0] */
+
+/*
+ * R1427 (0x593) - AIF2 EQ Band 5 PG
+ */
+#define WM8994_AIF2DAC_EQ_B5_PG_MASK            0xFFFF  /* AIF2DAC_EQ_B5_PG - [15:0] */
+#define WM8994_AIF2DAC_EQ_B5_PG_SHIFT                0  /* AIF2DAC_EQ_B5_PG - [15:0] */
+#define WM8994_AIF2DAC_EQ_B5_PG_WIDTH               16  /* AIF2DAC_EQ_B5_PG - [15:0] */
+
+/*
+ * R1536 (0x600) - DAC1 Mixer Volumes
+ */
+#define WM8994_ADCR_DAC1_VOL_MASK               0x01E0  /* ADCR_DAC1_VOL - [8:5] */
+#define WM8994_ADCR_DAC1_VOL_SHIFT                   5  /* ADCR_DAC1_VOL - [8:5] */
+#define WM8994_ADCR_DAC1_VOL_WIDTH                   4  /* ADCR_DAC1_VOL - [8:5] */
+#define WM8994_ADCL_DAC1_VOL_MASK               0x000F  /* ADCL_DAC1_VOL - [3:0] */
+#define WM8994_ADCL_DAC1_VOL_SHIFT                   0  /* ADCL_DAC1_VOL - [3:0] */
+#define WM8994_ADCL_DAC1_VOL_WIDTH                   4  /* ADCL_DAC1_VOL - [3:0] */
+
+/*
+ * R1537 (0x601) - DAC1 Left Mixer Routing
+ */
+#define WM8994_ADCR_TO_DAC1L                    0x0020  /* ADCR_TO_DAC1L */
+#define WM8994_ADCR_TO_DAC1L_MASK               0x0020  /* ADCR_TO_DAC1L */
+#define WM8994_ADCR_TO_DAC1L_SHIFT                   5  /* ADCR_TO_DAC1L */
+#define WM8994_ADCR_TO_DAC1L_WIDTH                   1  /* ADCR_TO_DAC1L */
+#define WM8994_ADCL_TO_DAC1L                    0x0010  /* ADCL_TO_DAC1L */
+#define WM8994_ADCL_TO_DAC1L_MASK               0x0010  /* ADCL_TO_DAC1L */
+#define WM8994_ADCL_TO_DAC1L_SHIFT                   4  /* ADCL_TO_DAC1L */
+#define WM8994_ADCL_TO_DAC1L_WIDTH                   1  /* ADCL_TO_DAC1L */
+#define WM8994_AIF2DACL_TO_DAC1L                0x0004  /* AIF2DACL_TO_DAC1L */
+#define WM8994_AIF2DACL_TO_DAC1L_MASK           0x0004  /* AIF2DACL_TO_DAC1L */
+#define WM8994_AIF2DACL_TO_DAC1L_SHIFT               2  /* AIF2DACL_TO_DAC1L */
+#define WM8994_AIF2DACL_TO_DAC1L_WIDTH               1  /* AIF2DACL_TO_DAC1L */
+#define WM8994_AIF1DAC2L_TO_DAC1L               0x0002  /* AIF1DAC2L_TO_DAC1L */
+#define WM8994_AIF1DAC2L_TO_DAC1L_MASK          0x0002  /* AIF1DAC2L_TO_DAC1L */
+#define WM8994_AIF1DAC2L_TO_DAC1L_SHIFT              1  /* AIF1DAC2L_TO_DAC1L */
+#define WM8994_AIF1DAC2L_TO_DAC1L_WIDTH              1  /* AIF1DAC2L_TO_DAC1L */
+#define WM8994_AIF1DAC1L_TO_DAC1L               0x0001  /* AIF1DAC1L_TO_DAC1L */
+#define WM8994_AIF1DAC1L_TO_DAC1L_MASK          0x0001  /* AIF1DAC1L_TO_DAC1L */
+#define WM8994_AIF1DAC1L_TO_DAC1L_SHIFT              0  /* AIF1DAC1L_TO_DAC1L */
+#define WM8994_AIF1DAC1L_TO_DAC1L_WIDTH              1  /* AIF1DAC1L_TO_DAC1L */
+
+/*
+ * R1538 (0x602) - DAC1 Right Mixer Routing
+ */
+#define WM8994_ADCR_TO_DAC1R                    0x0020  /* ADCR_TO_DAC1R */
+#define WM8994_ADCR_TO_DAC1R_MASK               0x0020  /* ADCR_TO_DAC1R */
+#define WM8994_ADCR_TO_DAC1R_SHIFT                   5  /* ADCR_TO_DAC1R */
+#define WM8994_ADCR_TO_DAC1R_WIDTH                   1  /* ADCR_TO_DAC1R */
+#define WM8994_ADCL_TO_DAC1R                    0x0010  /* ADCL_TO_DAC1R */
+#define WM8994_ADCL_TO_DAC1R_MASK               0x0010  /* ADCL_TO_DAC1R */
+#define WM8994_ADCL_TO_DAC1R_SHIFT                   4  /* ADCL_TO_DAC1R */
+#define WM8994_ADCL_TO_DAC1R_WIDTH                   1  /* ADCL_TO_DAC1R */
+#define WM8994_AIF2DACR_TO_DAC1R                0x0004  /* AIF2DACR_TO_DAC1R */
+#define WM8994_AIF2DACR_TO_DAC1R_MASK           0x0004  /* AIF2DACR_TO_DAC1R */
+#define WM8994_AIF2DACR_TO_DAC1R_SHIFT               2  /* AIF2DACR_TO_DAC1R */
+#define WM8994_AIF2DACR_TO_DAC1R_WIDTH               1  /* AIF2DACR_TO_DAC1R */
+#define WM8994_AIF1DAC2R_TO_DAC1R               0x0002  /* AIF1DAC2R_TO_DAC1R */
+#define WM8994_AIF1DAC2R_TO_DAC1R_MASK          0x0002  /* AIF1DAC2R_TO_DAC1R */
+#define WM8994_AIF1DAC2R_TO_DAC1R_SHIFT              1  /* AIF1DAC2R_TO_DAC1R */
+#define WM8994_AIF1DAC2R_TO_DAC1R_WIDTH              1  /* AIF1DAC2R_TO_DAC1R */
+#define WM8994_AIF1DAC1R_TO_DAC1R               0x0001  /* AIF1DAC1R_TO_DAC1R */
+#define WM8994_AIF1DAC1R_TO_DAC1R_MASK          0x0001  /* AIF1DAC1R_TO_DAC1R */
+#define WM8994_AIF1DAC1R_TO_DAC1R_SHIFT              0  /* AIF1DAC1R_TO_DAC1R */
+#define WM8994_AIF1DAC1R_TO_DAC1R_WIDTH              1  /* AIF1DAC1R_TO_DAC1R */
+
+/*
+ * R1539 (0x603) - DAC2 Mixer Volumes
+ */
+#define WM8994_ADCR_DAC2_VOL_MASK               0x01E0  /* ADCR_DAC2_VOL - [8:5] */
+#define WM8994_ADCR_DAC2_VOL_SHIFT                   5  /* ADCR_DAC2_VOL - [8:5] */
+#define WM8994_ADCR_DAC2_VOL_WIDTH                   4  /* ADCR_DAC2_VOL - [8:5] */
+#define WM8994_ADCL_DAC2_VOL_MASK               0x000F  /* ADCL_DAC2_VOL - [3:0] */
+#define WM8994_ADCL_DAC2_VOL_SHIFT                   0  /* ADCL_DAC2_VOL - [3:0] */
+#define WM8994_ADCL_DAC2_VOL_WIDTH                   4  /* ADCL_DAC2_VOL - [3:0] */
+
+/*
+ * R1540 (0x604) - DAC2 Left Mixer Routing
+ */
+#define WM8994_ADCR_TO_DAC2L                    0x0020  /* ADCR_TO_DAC2L */
+#define WM8994_ADCR_TO_DAC2L_MASK               0x0020  /* ADCR_TO_DAC2L */
+#define WM8994_ADCR_TO_DAC2L_SHIFT                   5  /* ADCR_TO_DAC2L */
+#define WM8994_ADCR_TO_DAC2L_WIDTH                   1  /* ADCR_TO_DAC2L */
+#define WM8994_ADCL_TO_DAC2L                    0x0010  /* ADCL_TO_DAC2L */
+#define WM8994_ADCL_TO_DAC2L_MASK               0x0010  /* ADCL_TO_DAC2L */
+#define WM8994_ADCL_TO_DAC2L_SHIFT                   4  /* ADCL_TO_DAC2L */
+#define WM8994_ADCL_TO_DAC2L_WIDTH                   1  /* ADCL_TO_DAC2L */
+#define WM8994_AIF2DACL_TO_DAC2L                0x0004  /* AIF2DACL_TO_DAC2L */
+#define WM8994_AIF2DACL_TO_DAC2L_MASK           0x0004  /* AIF2DACL_TO_DAC2L */
+#define WM8994_AIF2DACL_TO_DAC2L_SHIFT               2  /* AIF2DACL_TO_DAC2L */
+#define WM8994_AIF2DACL_TO_DAC2L_WIDTH               1  /* AIF2DACL_TO_DAC2L */
+#define WM8994_AIF1DAC2L_TO_DAC2L               0x0002  /* AIF1DAC2L_TO_DAC2L */
+#define WM8994_AIF1DAC2L_TO_DAC2L_MASK          0x0002  /* AIF1DAC2L_TO_DAC2L */
+#define WM8994_AIF1DAC2L_TO_DAC2L_SHIFT              1  /* AIF1DAC2L_TO_DAC2L */
+#define WM8994_AIF1DAC2L_TO_DAC2L_WIDTH              1  /* AIF1DAC2L_TO_DAC2L */
+#define WM8994_AIF1DAC1L_TO_DAC2L               0x0001  /* AIF1DAC1L_TO_DAC2L */
+#define WM8994_AIF1DAC1L_TO_DAC2L_MASK          0x0001  /* AIF1DAC1L_TO_DAC2L */
+#define WM8994_AIF1DAC1L_TO_DAC2L_SHIFT              0  /* AIF1DAC1L_TO_DAC2L */
+#define WM8994_AIF1DAC1L_TO_DAC2L_WIDTH              1  /* AIF1DAC1L_TO_DAC2L */
+
+/*
+ * R1541 (0x605) - DAC2 Right Mixer Routing
+ */
+#define WM8994_ADCR_TO_DAC2R                    0x0020  /* ADCR_TO_DAC2R */
+#define WM8994_ADCR_TO_DAC2R_MASK               0x0020  /* ADCR_TO_DAC2R */
+#define WM8994_ADCR_TO_DAC2R_SHIFT                   5  /* ADCR_TO_DAC2R */
+#define WM8994_ADCR_TO_DAC2R_WIDTH                   1  /* ADCR_TO_DAC2R */
+#define WM8994_ADCL_TO_DAC2R                    0x0010  /* ADCL_TO_DAC2R */
+#define WM8994_ADCL_TO_DAC2R_MASK               0x0010  /* ADCL_TO_DAC2R */
+#define WM8994_ADCL_TO_DAC2R_SHIFT                   4  /* ADCL_TO_DAC2R */
+#define WM8994_ADCL_TO_DAC2R_WIDTH                   1  /* ADCL_TO_DAC2R */
+#define WM8994_AIF2DACR_TO_DAC2R                0x0004  /* AIF2DACR_TO_DAC2R */
+#define WM8994_AIF2DACR_TO_DAC2R_MASK           0x0004  /* AIF2DACR_TO_DAC2R */
+#define WM8994_AIF2DACR_TO_DAC2R_SHIFT               2  /* AIF2DACR_TO_DAC2R */
+#define WM8994_AIF2DACR_TO_DAC2R_WIDTH               1  /* AIF2DACR_TO_DAC2R */
+#define WM8994_AIF1DAC2R_TO_DAC2R               0x0002  /* AIF1DAC2R_TO_DAC2R */
+#define WM8994_AIF1DAC2R_TO_DAC2R_MASK          0x0002  /* AIF1DAC2R_TO_DAC2R */
+#define WM8994_AIF1DAC2R_TO_DAC2R_SHIFT              1  /* AIF1DAC2R_TO_DAC2R */
+#define WM8994_AIF1DAC2R_TO_DAC2R_WIDTH              1  /* AIF1DAC2R_TO_DAC2R */
+#define WM8994_AIF1DAC1R_TO_DAC2R               0x0001  /* AIF1DAC1R_TO_DAC2R */
+#define WM8994_AIF1DAC1R_TO_DAC2R_MASK          0x0001  /* AIF1DAC1R_TO_DAC2R */
+#define WM8994_AIF1DAC1R_TO_DAC2R_SHIFT              0  /* AIF1DAC1R_TO_DAC2R */
+#define WM8994_AIF1DAC1R_TO_DAC2R_WIDTH              1  /* AIF1DAC1R_TO_DAC2R */
+
+/*
+ * R1542 (0x606) - AIF1 ADC1 Left Mixer Routing
+ */
+#define WM8994_ADC1L_TO_AIF1ADC1L               0x0002  /* ADC1L_TO_AIF1ADC1L */
+#define WM8994_ADC1L_TO_AIF1ADC1L_MASK          0x0002  /* ADC1L_TO_AIF1ADC1L */
+#define WM8994_ADC1L_TO_AIF1ADC1L_SHIFT              1  /* ADC1L_TO_AIF1ADC1L */
+#define WM8994_ADC1L_TO_AIF1ADC1L_WIDTH              1  /* ADC1L_TO_AIF1ADC1L */
+#define WM8994_AIF2DACL_TO_AIF1ADC1L            0x0001  /* AIF2DACL_TO_AIF1ADC1L */
+#define WM8994_AIF2DACL_TO_AIF1ADC1L_MASK       0x0001  /* AIF2DACL_TO_AIF1ADC1L */
+#define WM8994_AIF2DACL_TO_AIF1ADC1L_SHIFT           0  /* AIF2DACL_TO_AIF1ADC1L */
+#define WM8994_AIF2DACL_TO_AIF1ADC1L_WIDTH           1  /* AIF2DACL_TO_AIF1ADC1L */
+
+/*
+ * R1543 (0x607) - AIF1 ADC1 Right Mixer Routing
+ */
+#define WM8994_ADC1R_TO_AIF1ADC1R               0x0002  /* ADC1R_TO_AIF1ADC1R */
+#define WM8994_ADC1R_TO_AIF1ADC1R_MASK          0x0002  /* ADC1R_TO_AIF1ADC1R */
+#define WM8994_ADC1R_TO_AIF1ADC1R_SHIFT              1  /* ADC1R_TO_AIF1ADC1R */
+#define WM8994_ADC1R_TO_AIF1ADC1R_WIDTH              1  /* ADC1R_TO_AIF1ADC1R */
+#define WM8994_AIF2DACR_TO_AIF1ADC1R            0x0001  /* AIF2DACR_TO_AIF1ADC1R */
+#define WM8994_AIF2DACR_TO_AIF1ADC1R_MASK       0x0001  /* AIF2DACR_TO_AIF1ADC1R */
+#define WM8994_AIF2DACR_TO_AIF1ADC1R_SHIFT           0  /* AIF2DACR_TO_AIF1ADC1R */
+#define WM8994_AIF2DACR_TO_AIF1ADC1R_WIDTH           1  /* AIF2DACR_TO_AIF1ADC1R */
+
+/*
+ * R1544 (0x608) - AIF1 ADC2 Left Mixer Routing
+ */
+#define WM8994_ADC2L_TO_AIF1ADC2L               0x0002  /* ADC2L_TO_AIF1ADC2L */
+#define WM8994_ADC2L_TO_AIF1ADC2L_MASK          0x0002  /* ADC2L_TO_AIF1ADC2L */
+#define WM8994_ADC2L_TO_AIF1ADC2L_SHIFT              1  /* ADC2L_TO_AIF1ADC2L */
+#define WM8994_ADC2L_TO_AIF1ADC2L_WIDTH              1  /* ADC2L_TO_AIF1ADC2L */
+#define WM8994_AIF2DACL_TO_AIF1ADC2L            0x0001  /* AIF2DACL_TO_AIF1ADC2L */
+#define WM8994_AIF2DACL_TO_AIF1ADC2L_MASK       0x0001  /* AIF2DACL_TO_AIF1ADC2L */
+#define WM8994_AIF2DACL_TO_AIF1ADC2L_SHIFT           0  /* AIF2DACL_TO_AIF1ADC2L */
+#define WM8994_AIF2DACL_TO_AIF1ADC2L_WIDTH           1  /* AIF2DACL_TO_AIF1ADC2L */
+
+/*
+ * R1545 (0x609) - AIF1 ADC2 Right mixer Routing
+ */
+#define WM8994_ADC2R_TO_AIF1ADC2R               0x0002  /* ADC2R_TO_AIF1ADC2R */
+#define WM8994_ADC2R_TO_AIF1ADC2R_MASK          0x0002  /* ADC2R_TO_AIF1ADC2R */
+#define WM8994_ADC2R_TO_AIF1ADC2R_SHIFT              1  /* ADC2R_TO_AIF1ADC2R */
+#define WM8994_ADC2R_TO_AIF1ADC2R_WIDTH              1  /* ADC2R_TO_AIF1ADC2R */
+#define WM8994_AIF2DACR_TO_AIF1ADC2R            0x0001  /* AIF2DACR_TO_AIF1ADC2R */
+#define WM8994_AIF2DACR_TO_AIF1ADC2R_MASK       0x0001  /* AIF2DACR_TO_AIF1ADC2R */
+#define WM8994_AIF2DACR_TO_AIF1ADC2R_SHIFT           0  /* AIF2DACR_TO_AIF1ADC2R */
+#define WM8994_AIF2DACR_TO_AIF1ADC2R_WIDTH           1  /* AIF2DACR_TO_AIF1ADC2R */
+
+/*
+ * R1552 (0x610) - DAC1 Left Volume
+ */
+#define WM8994_DAC1L_MUTE                       0x0200  /* DAC1L_MUTE */
+#define WM8994_DAC1L_MUTE_MASK                  0x0200  /* DAC1L_MUTE */
+#define WM8994_DAC1L_MUTE_SHIFT                      9  /* DAC1L_MUTE */
+#define WM8994_DAC1L_MUTE_WIDTH                      1  /* DAC1L_MUTE */
+#define WM8994_DAC1_VU                          0x0100  /* DAC1_VU */
+#define WM8994_DAC1_VU_MASK                     0x0100  /* DAC1_VU */
+#define WM8994_DAC1_VU_SHIFT                         8  /* DAC1_VU */
+#define WM8994_DAC1_VU_WIDTH                         1  /* DAC1_VU */
+#define WM8994_DAC1L_VOL_MASK                   0x00FF  /* DAC1L_VOL - [7:0] */
+#define WM8994_DAC1L_VOL_SHIFT                       0  /* DAC1L_VOL - [7:0] */
+#define WM8994_DAC1L_VOL_WIDTH                       8  /* DAC1L_VOL - [7:0] */
+
+/*
+ * R1553 (0x611) - DAC1 Right Volume
+ */
+#define WM8994_DAC1R_MUTE                       0x0200  /* DAC1R_MUTE */
+#define WM8994_DAC1R_MUTE_MASK                  0x0200  /* DAC1R_MUTE */
+#define WM8994_DAC1R_MUTE_SHIFT                      9  /* DAC1R_MUTE */
+#define WM8994_DAC1R_MUTE_WIDTH                      1  /* DAC1R_MUTE */
+#define WM8994_DAC1_VU                          0x0100  /* DAC1_VU */
+#define WM8994_DAC1_VU_MASK                     0x0100  /* DAC1_VU */
+#define WM8994_DAC1_VU_SHIFT                         8  /* DAC1_VU */
+#define WM8994_DAC1_VU_WIDTH                         1  /* DAC1_VU */
+#define WM8994_DAC1R_VOL_MASK                   0x00FF  /* DAC1R_VOL - [7:0] */
+#define WM8994_DAC1R_VOL_SHIFT                       0  /* DAC1R_VOL - [7:0] */
+#define WM8994_DAC1R_VOL_WIDTH                       8  /* DAC1R_VOL - [7:0] */
+
+/*
+ * R1554 (0x612) - DAC2 Left Volume
+ */
+#define WM8994_DAC2L_MUTE                       0x0200  /* DAC2L_MUTE */
+#define WM8994_DAC2L_MUTE_MASK                  0x0200  /* DAC2L_MUTE */
+#define WM8994_DAC2L_MUTE_SHIFT                      9  /* DAC2L_MUTE */
+#define WM8994_DAC2L_MUTE_WIDTH                      1  /* DAC2L_MUTE */
+#define WM8994_DAC2_VU                          0x0100  /* DAC2_VU */
+#define WM8994_DAC2_VU_MASK                     0x0100  /* DAC2_VU */
+#define WM8994_DAC2_VU_SHIFT                         8  /* DAC2_VU */
+#define WM8994_DAC2_VU_WIDTH                         1  /* DAC2_VU */
+#define WM8994_DAC2L_VOL_MASK                   0x00FF  /* DAC2L_VOL - [7:0] */
+#define WM8994_DAC2L_VOL_SHIFT                       0  /* DAC2L_VOL - [7:0] */
+#define WM8994_DAC2L_VOL_WIDTH                       8  /* DAC2L_VOL - [7:0] */
+
+/*
+ * R1555 (0x613) - DAC2 Right Volume
+ */
+#define WM8994_DAC2R_MUTE                       0x0200  /* DAC2R_MUTE */
+#define WM8994_DAC2R_MUTE_MASK                  0x0200  /* DAC2R_MUTE */
+#define WM8994_DAC2R_MUTE_SHIFT                      9  /* DAC2R_MUTE */
+#define WM8994_DAC2R_MUTE_WIDTH                      1  /* DAC2R_MUTE */
+#define WM8994_DAC2_VU                          0x0100  /* DAC2_VU */
+#define WM8994_DAC2_VU_MASK                     0x0100  /* DAC2_VU */
+#define WM8994_DAC2_VU_SHIFT                         8  /* DAC2_VU */
+#define WM8994_DAC2_VU_WIDTH                         1  /* DAC2_VU */
+#define WM8994_DAC2R_VOL_MASK                   0x00FF  /* DAC2R_VOL - [7:0] */
+#define WM8994_DAC2R_VOL_SHIFT                       0  /* DAC2R_VOL - [7:0] */
+#define WM8994_DAC2R_VOL_WIDTH                       8  /* DAC2R_VOL - [7:0] */
+
+/*
+ * R1556 (0x614) - DAC Softmute
+ */
+#define WM8994_DAC_SOFTMUTEMODE                 0x0002  /* DAC_SOFTMUTEMODE */
+#define WM8994_DAC_SOFTMUTEMODE_MASK            0x0002  /* DAC_SOFTMUTEMODE */
+#define WM8994_DAC_SOFTMUTEMODE_SHIFT                1  /* DAC_SOFTMUTEMODE */
+#define WM8994_DAC_SOFTMUTEMODE_WIDTH                1  /* DAC_SOFTMUTEMODE */
+#define WM8994_DAC_MUTERATE                     0x0001  /* DAC_MUTERATE */
+#define WM8994_DAC_MUTERATE_MASK                0x0001  /* DAC_MUTERATE */
+#define WM8994_DAC_MUTERATE_SHIFT                    0  /* DAC_MUTERATE */
+#define WM8994_DAC_MUTERATE_WIDTH                    1  /* DAC_MUTERATE */
+
+/*
+ * R1568 (0x620) - Oversampling
+ */
+#define WM8994_ADC_OSR128                       0x0002  /* ADC_OSR128 */
+#define WM8994_ADC_OSR128_MASK                  0x0002  /* ADC_OSR128 */
+#define WM8994_ADC_OSR128_SHIFT                      1  /* ADC_OSR128 */
+#define WM8994_ADC_OSR128_WIDTH                      1  /* ADC_OSR128 */
+#define WM8994_DAC_OSR128                       0x0001  /* DAC_OSR128 */
+#define WM8994_DAC_OSR128_MASK                  0x0001  /* DAC_OSR128 */
+#define WM8994_DAC_OSR128_SHIFT                      0  /* DAC_OSR128 */
+#define WM8994_DAC_OSR128_WIDTH                      1  /* DAC_OSR128 */
+
+/*
+ * R1569 (0x621) - Sidetone
+ */
+#define WM8994_ST_HPF_CUT_MASK                  0x0380  /* ST_HPF_CUT - [9:7] */
+#define WM8994_ST_HPF_CUT_SHIFT                      7  /* ST_HPF_CUT - [9:7] */
+#define WM8994_ST_HPF_CUT_WIDTH                      3  /* ST_HPF_CUT - [9:7] */
+#define WM8994_ST_HPF                           0x0040  /* ST_HPF */
+#define WM8994_ST_HPF_MASK                      0x0040  /* ST_HPF */
+#define WM8994_ST_HPF_SHIFT                          6  /* ST_HPF */
+#define WM8994_ST_HPF_WIDTH                          1  /* ST_HPF */
+#define WM8994_STR_SEL                          0x0002  /* STR_SEL */
+#define WM8994_STR_SEL_MASK                     0x0002  /* STR_SEL */
+#define WM8994_STR_SEL_SHIFT                         1  /* STR_SEL */
+#define WM8994_STR_SEL_WIDTH                         1  /* STR_SEL */
+#define WM8994_STL_SEL                          0x0001  /* STL_SEL */
+#define WM8994_STL_SEL_MASK                     0x0001  /* STL_SEL */
+#define WM8994_STL_SEL_SHIFT                         0  /* STL_SEL */
+#define WM8994_STL_SEL_WIDTH                         1  /* STL_SEL */
+
+/*
+ * R1797 (0x705) - JACKDET Ctrl
+ */
+#define WM1811_JACKDET_DB                       0x0100  /* JACKDET_DB */
+#define WM1811_JACKDET_DB_MASK                  0x0100  /* JACKDET_DB */
+#define WM1811_JACKDET_DB_SHIFT                      8  /* JACKDET_DB */
+#define WM1811_JACKDET_DB_WIDTH                      1  /* JACKDET_DB */
+#define WM1811_JACKDET_LVL                      0x0040  /* JACKDET_LVL */
+#define WM1811_JACKDET_LVL_MASK                 0x0040  /* JACKDET_LVL */
+#define WM1811_JACKDET_LVL_SHIFT                     6  /* JACKDET_LVL */
+#define WM1811_JACKDET_LVL_WIDTH                     1  /* JACKDET_LVL */
+
+/*
+ * R1824 (0x720) - Pull Control (1)
+ */
+#define WM8994_DMICDAT2_PU                      0x0800  /* DMICDAT2_PU */
+#define WM8994_DMICDAT2_PU_MASK                 0x0800  /* DMICDAT2_PU */
+#define WM8994_DMICDAT2_PU_SHIFT                    11  /* DMICDAT2_PU */
+#define WM8994_DMICDAT2_PU_WIDTH                     1  /* DMICDAT2_PU */
+#define WM8994_DMICDAT2_PD                      0x0400  /* DMICDAT2_PD */
+#define WM8994_DMICDAT2_PD_MASK                 0x0400  /* DMICDAT2_PD */
+#define WM8994_DMICDAT2_PD_SHIFT                    10  /* DMICDAT2_PD */
+#define WM8994_DMICDAT2_PD_WIDTH                     1  /* DMICDAT2_PD */
+#define WM8994_DMICDAT1_PU                      0x0200  /* DMICDAT1_PU */
+#define WM8994_DMICDAT1_PU_MASK                 0x0200  /* DMICDAT1_PU */
+#define WM8994_DMICDAT1_PU_SHIFT                     9  /* DMICDAT1_PU */
+#define WM8994_DMICDAT1_PU_WIDTH                     1  /* DMICDAT1_PU */
+#define WM8994_DMICDAT1_PD                      0x0100  /* DMICDAT1_PD */
+#define WM8994_DMICDAT1_PD_MASK                 0x0100  /* DMICDAT1_PD */
+#define WM8994_DMICDAT1_PD_SHIFT                     8  /* DMICDAT1_PD */
+#define WM8994_DMICDAT1_PD_WIDTH                     1  /* DMICDAT1_PD */
+#define WM8994_MCLK1_PU                         0x0080  /* MCLK1_PU */
+#define WM8994_MCLK1_PU_MASK                    0x0080  /* MCLK1_PU */
+#define WM8994_MCLK1_PU_SHIFT                        7  /* MCLK1_PU */
+#define WM8994_MCLK1_PU_WIDTH                        1  /* MCLK1_PU */
+#define WM8994_MCLK1_PD                         0x0040  /* MCLK1_PD */
+#define WM8994_MCLK1_PD_MASK                    0x0040  /* MCLK1_PD */
+#define WM8994_MCLK1_PD_SHIFT                        6  /* MCLK1_PD */
+#define WM8994_MCLK1_PD_WIDTH                        1  /* MCLK1_PD */
+#define WM8994_DACDAT1_PU                       0x0020  /* DACDAT1_PU */
+#define WM8994_DACDAT1_PU_MASK                  0x0020  /* DACDAT1_PU */
+#define WM8994_DACDAT1_PU_SHIFT                      5  /* DACDAT1_PU */
+#define WM8994_DACDAT1_PU_WIDTH                      1  /* DACDAT1_PU */
+#define WM8994_DACDAT1_PD                       0x0010  /* DACDAT1_PD */
+#define WM8994_DACDAT1_PD_MASK                  0x0010  /* DACDAT1_PD */
+#define WM8994_DACDAT1_PD_SHIFT                      4  /* DACDAT1_PD */
+#define WM8994_DACDAT1_PD_WIDTH                      1  /* DACDAT1_PD */
+#define WM8994_DACLRCLK1_PU                     0x0008  /* DACLRCLK1_PU */
+#define WM8994_DACLRCLK1_PU_MASK                0x0008  /* DACLRCLK1_PU */
+#define WM8994_DACLRCLK1_PU_SHIFT                    3  /* DACLRCLK1_PU */
+#define WM8994_DACLRCLK1_PU_WIDTH                    1  /* DACLRCLK1_PU */
+#define WM8994_DACLRCLK1_PD                     0x0004  /* DACLRCLK1_PD */
+#define WM8994_DACLRCLK1_PD_MASK                0x0004  /* DACLRCLK1_PD */
+#define WM8994_DACLRCLK1_PD_SHIFT                    2  /* DACLRCLK1_PD */
+#define WM8994_DACLRCLK1_PD_WIDTH                    1  /* DACLRCLK1_PD */
+#define WM8994_BCLK1_PU                         0x0002  /* BCLK1_PU */
+#define WM8994_BCLK1_PU_MASK                    0x0002  /* BCLK1_PU */
+#define WM8994_BCLK1_PU_SHIFT                        1  /* BCLK1_PU */
+#define WM8994_BCLK1_PU_WIDTH                        1  /* BCLK1_PU */
+#define WM8994_BCLK1_PD                         0x0001  /* BCLK1_PD */
+#define WM8994_BCLK1_PD_MASK                    0x0001  /* BCLK1_PD */
+#define WM8994_BCLK1_PD_SHIFT                        0  /* BCLK1_PD */
+#define WM8994_BCLK1_PD_WIDTH                        1  /* BCLK1_PD */
+
+/*
+ * R1825 (0x721) - Pull Control (2)
+ */
+#define WM8994_CSNADDR_PD                       0x0100  /* CSNADDR_PD */
+#define WM8994_CSNADDR_PD_MASK                  0x0100  /* CSNADDR_PD */
+#define WM8994_CSNADDR_PD_SHIFT                      8  /* CSNADDR_PD */
+#define WM8994_CSNADDR_PD_WIDTH                      1  /* CSNADDR_PD */
+#define WM8994_LDO2ENA_PD                       0x0040  /* LDO2ENA_PD */
+#define WM8994_LDO2ENA_PD_MASK                  0x0040  /* LDO2ENA_PD */
+#define WM8994_LDO2ENA_PD_SHIFT                      6  /* LDO2ENA_PD */
+#define WM8994_LDO2ENA_PD_WIDTH                      1  /* LDO2ENA_PD */
+#define WM8994_LDO1ENA_PD                       0x0010  /* LDO1ENA_PD */
+#define WM8994_LDO1ENA_PD_MASK                  0x0010  /* LDO1ENA_PD */
+#define WM8994_LDO1ENA_PD_SHIFT                      4  /* LDO1ENA_PD */
+#define WM8994_LDO1ENA_PD_WIDTH                      1  /* LDO1ENA_PD */
+#define WM8994_CIFMODE_PD                       0x0004  /* CIFMODE_PD */
+#define WM8994_CIFMODE_PD_MASK                  0x0004  /* CIFMODE_PD */
+#define WM8994_CIFMODE_PD_SHIFT                      2  /* CIFMODE_PD */
+#define WM8994_CIFMODE_PD_WIDTH                      1  /* CIFMODE_PD */
+#define WM8994_SPKMODE_PU                       0x0002  /* SPKMODE_PU */
+#define WM8994_SPKMODE_PU_MASK                  0x0002  /* SPKMODE_PU */
+#define WM8994_SPKMODE_PU_SHIFT                      1  /* SPKMODE_PU */
+#define WM8994_SPKMODE_PU_WIDTH                      1  /* SPKMODE_PU */
+
+/*
+ * R1840 (0x730) - Interrupt Status 1
+ */
+#define WM8994_GP11_EINT                        0x0400  /* GP11_EINT */
+#define WM8994_GP11_EINT_MASK                   0x0400  /* GP11_EINT */
+#define WM8994_GP11_EINT_SHIFT                      10  /* GP11_EINT */
+#define WM8994_GP11_EINT_WIDTH                       1  /* GP11_EINT */
+#define WM8994_GP10_EINT                        0x0200  /* GP10_EINT */
+#define WM8994_GP10_EINT_MASK                   0x0200  /* GP10_EINT */
+#define WM8994_GP10_EINT_SHIFT                       9  /* GP10_EINT */
+#define WM8994_GP10_EINT_WIDTH                       1  /* GP10_EINT */
+#define WM8994_GP9_EINT                         0x0100  /* GP9_EINT */
+#define WM8994_GP9_EINT_MASK                    0x0100  /* GP9_EINT */
+#define WM8994_GP9_EINT_SHIFT                        8  /* GP9_EINT */
+#define WM8994_GP9_EINT_WIDTH                        1  /* GP9_EINT */
+#define WM8994_GP8_EINT                         0x0080  /* GP8_EINT */
+#define WM8994_GP8_EINT_MASK                    0x0080  /* GP8_EINT */
+#define WM8994_GP8_EINT_SHIFT                        7  /* GP8_EINT */
+#define WM8994_GP8_EINT_WIDTH                        1  /* GP8_EINT */
+#define WM8994_GP7_EINT                         0x0040  /* GP7_EINT */
+#define WM8994_GP7_EINT_MASK                    0x0040  /* GP7_EINT */
+#define WM8994_GP7_EINT_SHIFT                        6  /* GP7_EINT */
+#define WM8994_GP7_EINT_WIDTH                        1  /* GP7_EINT */
+#define WM8994_GP6_EINT                         0x0020  /* GP6_EINT */
+#define WM8994_GP6_EINT_MASK                    0x0020  /* GP6_EINT */
+#define WM8994_GP6_EINT_SHIFT                        5  /* GP6_EINT */
+#define WM8994_GP6_EINT_WIDTH                        1  /* GP6_EINT */
+#define WM8994_GP5_EINT                         0x0010  /* GP5_EINT */
+#define WM8994_GP5_EINT_MASK                    0x0010  /* GP5_EINT */
+#define WM8994_GP5_EINT_SHIFT                        4  /* GP5_EINT */
+#define WM8994_GP5_EINT_WIDTH                        1  /* GP5_EINT */
+#define WM8994_GP4_EINT                         0x0008  /* GP4_EINT */
+#define WM8994_GP4_EINT_MASK                    0x0008  /* GP4_EINT */
+#define WM8994_GP4_EINT_SHIFT                        3  /* GP4_EINT */
+#define WM8994_GP4_EINT_WIDTH                        1  /* GP4_EINT */
+#define WM8994_GP3_EINT                         0x0004  /* GP3_EINT */
+#define WM8994_GP3_EINT_MASK                    0x0004  /* GP3_EINT */
+#define WM8994_GP3_EINT_SHIFT                        2  /* GP3_EINT */
+#define WM8994_GP3_EINT_WIDTH                        1  /* GP3_EINT */
+#define WM8994_GP2_EINT                         0x0002  /* GP2_EINT */
+#define WM8994_GP2_EINT_MASK                    0x0002  /* GP2_EINT */
+#define WM8994_GP2_EINT_SHIFT                        1  /* GP2_EINT */
+#define WM8994_GP2_EINT_WIDTH                        1  /* GP2_EINT */
+#define WM8994_GP1_EINT                         0x0001  /* GP1_EINT */
+#define WM8994_GP1_EINT_MASK                    0x0001  /* GP1_EINT */
+#define WM8994_GP1_EINT_SHIFT                        0  /* GP1_EINT */
+#define WM8994_GP1_EINT_WIDTH                        1  /* GP1_EINT */
+
+/*
+ * R1841 (0x731) - Interrupt Status 2
+ */
+#define WM8994_TEMP_WARN_EINT                   0x8000  /* TEMP_WARN_EINT */
+#define WM8994_TEMP_WARN_EINT_MASK              0x8000  /* TEMP_WARN_EINT */
+#define WM8994_TEMP_WARN_EINT_SHIFT                 15  /* TEMP_WARN_EINT */
+#define WM8994_TEMP_WARN_EINT_WIDTH                  1  /* TEMP_WARN_EINT */
+#define WM8994_DCS_DONE_EINT                    0x4000  /* DCS_DONE_EINT */
+#define WM8994_DCS_DONE_EINT_MASK               0x4000  /* DCS_DONE_EINT */
+#define WM8994_DCS_DONE_EINT_SHIFT                  14  /* DCS_DONE_EINT */
+#define WM8994_DCS_DONE_EINT_WIDTH                   1  /* DCS_DONE_EINT */
+#define WM8994_WSEQ_DONE_EINT                   0x2000  /* WSEQ_DONE_EINT */
+#define WM8994_WSEQ_DONE_EINT_MASK              0x2000  /* WSEQ_DONE_EINT */
+#define WM8994_WSEQ_DONE_EINT_SHIFT                 13  /* WSEQ_DONE_EINT */
+#define WM8994_WSEQ_DONE_EINT_WIDTH                  1  /* WSEQ_DONE_EINT */
+#define WM8994_FIFOS_ERR_EINT                   0x1000  /* FIFOS_ERR_EINT */
+#define WM8994_FIFOS_ERR_EINT_MASK              0x1000  /* FIFOS_ERR_EINT */
+#define WM8994_FIFOS_ERR_EINT_SHIFT                 12  /* FIFOS_ERR_EINT */
+#define WM8994_FIFOS_ERR_EINT_WIDTH                  1  /* FIFOS_ERR_EINT */
+#define WM8994_AIF2DRC_SIG_DET_EINT             0x0800  /* AIF2DRC_SIG_DET_EINT */
+#define WM8994_AIF2DRC_SIG_DET_EINT_MASK        0x0800  /* AIF2DRC_SIG_DET_EINT */
+#define WM8994_AIF2DRC_SIG_DET_EINT_SHIFT           11  /* AIF2DRC_SIG_DET_EINT */
+#define WM8994_AIF2DRC_SIG_DET_EINT_WIDTH            1  /* AIF2DRC_SIG_DET_EINT */
+#define WM8994_AIF1DRC2_SIG_DET_EINT            0x0400  /* AIF1DRC2_SIG_DET_EINT */
+#define WM8994_AIF1DRC2_SIG_DET_EINT_MASK       0x0400  /* AIF1DRC2_SIG_DET_EINT */
+#define WM8994_AIF1DRC2_SIG_DET_EINT_SHIFT          10  /* AIF1DRC2_SIG_DET_EINT */
+#define WM8994_AIF1DRC2_SIG_DET_EINT_WIDTH           1  /* AIF1DRC2_SIG_DET_EINT */
+#define WM8994_AIF1DRC1_SIG_DET_EINT            0x0200  /* AIF1DRC1_SIG_DET_EINT */
+#define WM8994_AIF1DRC1_SIG_DET_EINT_MASK       0x0200  /* AIF1DRC1_SIG_DET_EINT */
+#define WM8994_AIF1DRC1_SIG_DET_EINT_SHIFT           9  /* AIF1DRC1_SIG_DET_EINT */
+#define WM8994_AIF1DRC1_SIG_DET_EINT_WIDTH           1  /* AIF1DRC1_SIG_DET_EINT */
+#define WM8994_SRC2_LOCK_EINT                   0x0100  /* SRC2_LOCK_EINT */
+#define WM8994_SRC2_LOCK_EINT_MASK              0x0100  /* SRC2_LOCK_EINT */
+#define WM8994_SRC2_LOCK_EINT_SHIFT                  8  /* SRC2_LOCK_EINT */
+#define WM8994_SRC2_LOCK_EINT_WIDTH                  1  /* SRC2_LOCK_EINT */
+#define WM8994_SRC1_LOCK_EINT                   0x0080  /* SRC1_LOCK_EINT */
+#define WM8994_SRC1_LOCK_EINT_MASK              0x0080  /* SRC1_LOCK_EINT */
+#define WM8994_SRC1_LOCK_EINT_SHIFT                  7  /* SRC1_LOCK_EINT */
+#define WM8994_SRC1_LOCK_EINT_WIDTH                  1  /* SRC1_LOCK_EINT */
+#define WM8994_FLL2_LOCK_EINT                   0x0040  /* FLL2_LOCK_EINT */
+#define WM8994_FLL2_LOCK_EINT_MASK              0x0040  /* FLL2_LOCK_EINT */
+#define WM8994_FLL2_LOCK_EINT_SHIFT                  6  /* FLL2_LOCK_EINT */
+#define WM8994_FLL2_LOCK_EINT_WIDTH                  1  /* FLL2_LOCK_EINT */
+#define WM8994_FLL1_LOCK_EINT                   0x0020  /* FLL1_LOCK_EINT */
+#define WM8994_FLL1_LOCK_EINT_MASK              0x0020  /* FLL1_LOCK_EINT */
+#define WM8994_FLL1_LOCK_EINT_SHIFT                  5  /* FLL1_LOCK_EINT */
+#define WM8994_FLL1_LOCK_EINT_WIDTH                  1  /* FLL1_LOCK_EINT */
+#define WM8994_MIC2_SHRT_EINT                   0x0010  /* MIC2_SHRT_EINT */
+#define WM8994_MIC2_SHRT_EINT_MASK              0x0010  /* MIC2_SHRT_EINT */
+#define WM8994_MIC2_SHRT_EINT_SHIFT                  4  /* MIC2_SHRT_EINT */
+#define WM8994_MIC2_SHRT_EINT_WIDTH                  1  /* MIC2_SHRT_EINT */
+#define WM8994_MIC2_DET_EINT                    0x0008  /* MIC2_DET_EINT */
+#define WM8994_MIC2_DET_EINT_MASK               0x0008  /* MIC2_DET_EINT */
+#define WM8994_MIC2_DET_EINT_SHIFT                   3  /* MIC2_DET_EINT */
+#define WM8994_MIC2_DET_EINT_WIDTH                   1  /* MIC2_DET_EINT */
+#define WM8994_MIC1_SHRT_EINT                   0x0004  /* MIC1_SHRT_EINT */
+#define WM8994_MIC1_SHRT_EINT_MASK              0x0004  /* MIC1_SHRT_EINT */
+#define WM8994_MIC1_SHRT_EINT_SHIFT                  2  /* MIC1_SHRT_EINT */
+#define WM8994_MIC1_SHRT_EINT_WIDTH                  1  /* MIC1_SHRT_EINT */
+#define WM8994_MIC1_DET_EINT                    0x0002  /* MIC1_DET_EINT */
+#define WM8994_MIC1_DET_EINT_MASK               0x0002  /* MIC1_DET_EINT */
+#define WM8994_MIC1_DET_EINT_SHIFT                   1  /* MIC1_DET_EINT */
+#define WM8994_MIC1_DET_EINT_WIDTH                   1  /* MIC1_DET_EINT */
+#define WM8994_TEMP_SHUT_EINT                   0x0001  /* TEMP_SHUT_EINT */
+#define WM8994_TEMP_SHUT_EINT_MASK              0x0001  /* TEMP_SHUT_EINT */
+#define WM8994_TEMP_SHUT_EINT_SHIFT                  0  /* TEMP_SHUT_EINT */
+#define WM8994_TEMP_SHUT_EINT_WIDTH                  1  /* TEMP_SHUT_EINT */
+
+/*
+ * R1842 (0x732) - Interrupt Raw Status 2
+ */
+#define WM8994_TEMP_WARN_STS                    0x8000  /* TEMP_WARN_STS */
+#define WM8994_TEMP_WARN_STS_MASK               0x8000  /* TEMP_WARN_STS */
+#define WM8994_TEMP_WARN_STS_SHIFT                  15  /* TEMP_WARN_STS */
+#define WM8994_TEMP_WARN_STS_WIDTH                   1  /* TEMP_WARN_STS */
+#define WM8994_DCS_DONE_STS                     0x4000  /* DCS_DONE_STS */
+#define WM8994_DCS_DONE_STS_MASK                0x4000  /* DCS_DONE_STS */
+#define WM8994_DCS_DONE_STS_SHIFT                   14  /* DCS_DONE_STS */
+#define WM8994_DCS_DONE_STS_WIDTH                    1  /* DCS_DONE_STS */
+#define WM8994_WSEQ_DONE_STS                    0x2000  /* WSEQ_DONE_STS */
+#define WM8994_WSEQ_DONE_STS_MASK               0x2000  /* WSEQ_DONE_STS */
+#define WM8994_WSEQ_DONE_STS_SHIFT                  13  /* WSEQ_DONE_STS */
+#define WM8994_WSEQ_DONE_STS_WIDTH                   1  /* WSEQ_DONE_STS */
+#define WM8994_FIFOS_ERR_STS                    0x1000  /* FIFOS_ERR_STS */
+#define WM8994_FIFOS_ERR_STS_MASK               0x1000  /* FIFOS_ERR_STS */
+#define WM8994_FIFOS_ERR_STS_SHIFT                  12  /* FIFOS_ERR_STS */
+#define WM8994_FIFOS_ERR_STS_WIDTH                   1  /* FIFOS_ERR_STS */
+#define WM8994_AIF2DRC_SIG_DET_STS              0x0800  /* AIF2DRC_SIG_DET_STS */
+#define WM8994_AIF2DRC_SIG_DET_STS_MASK         0x0800  /* AIF2DRC_SIG_DET_STS */
+#define WM8994_AIF2DRC_SIG_DET_STS_SHIFT            11  /* AIF2DRC_SIG_DET_STS */
+#define WM8994_AIF2DRC_SIG_DET_STS_WIDTH             1  /* AIF2DRC_SIG_DET_STS */
+#define WM8994_AIF1DRC2_SIG_DET_STS             0x0400  /* AIF1DRC2_SIG_DET_STS */
+#define WM8994_AIF1DRC2_SIG_DET_STS_MASK        0x0400  /* AIF1DRC2_SIG_DET_STS */
+#define WM8994_AIF1DRC2_SIG_DET_STS_SHIFT           10  /* AIF1DRC2_SIG_DET_STS */
+#define WM8994_AIF1DRC2_SIG_DET_STS_WIDTH            1  /* AIF1DRC2_SIG_DET_STS */
+#define WM8994_AIF1DRC1_SIG_DET_STS             0x0200  /* AIF1DRC1_SIG_DET_STS */
+#define WM8994_AIF1DRC1_SIG_DET_STS_MASK        0x0200  /* AIF1DRC1_SIG_DET_STS */
+#define WM8994_AIF1DRC1_SIG_DET_STS_SHIFT            9  /* AIF1DRC1_SIG_DET_STS */
+#define WM8994_AIF1DRC1_SIG_DET_STS_WIDTH            1  /* AIF1DRC1_SIG_DET_STS */
+#define WM8994_SRC2_LOCK_STS                    0x0100  /* SRC2_LOCK_STS */
+#define WM8994_SRC2_LOCK_STS_MASK               0x0100  /* SRC2_LOCK_STS */
+#define WM8994_SRC2_LOCK_STS_SHIFT                   8  /* SRC2_LOCK_STS */
+#define WM8994_SRC2_LOCK_STS_WIDTH                   1  /* SRC2_LOCK_STS */
+#define WM8994_SRC1_LOCK_STS                    0x0080  /* SRC1_LOCK_STS */
+#define WM8994_SRC1_LOCK_STS_MASK               0x0080  /* SRC1_LOCK_STS */
+#define WM8994_SRC1_LOCK_STS_SHIFT                   7  /* SRC1_LOCK_STS */
+#define WM8994_SRC1_LOCK_STS_WIDTH                   1  /* SRC1_LOCK_STS */
+#define WM8994_FLL2_LOCK_STS                    0x0040  /* FLL2_LOCK_STS */
+#define WM8994_FLL2_LOCK_STS_MASK               0x0040  /* FLL2_LOCK_STS */
+#define WM8994_FLL2_LOCK_STS_SHIFT                   6  /* FLL2_LOCK_STS */
+#define WM8994_FLL2_LOCK_STS_WIDTH                   1  /* FLL2_LOCK_STS */
+#define WM8994_FLL1_LOCK_STS                    0x0020  /* FLL1_LOCK_STS */
+#define WM8994_FLL1_LOCK_STS_MASK               0x0020  /* FLL1_LOCK_STS */
+#define WM8994_FLL1_LOCK_STS_SHIFT                   5  /* FLL1_LOCK_STS */
+#define WM8994_FLL1_LOCK_STS_WIDTH                   1  /* FLL1_LOCK_STS */
+#define WM8994_MIC2_SHRT_STS                    0x0010  /* MIC2_SHRT_STS */
+#define WM8994_MIC2_SHRT_STS_MASK               0x0010  /* MIC2_SHRT_STS */
+#define WM8994_MIC2_SHRT_STS_SHIFT                   4  /* MIC2_SHRT_STS */
+#define WM8994_MIC2_SHRT_STS_WIDTH                   1  /* MIC2_SHRT_STS */
+#define WM8994_MIC2_DET_STS                     0x0008  /* MIC2_DET_STS */
+#define WM8994_MIC2_DET_STS_MASK                0x0008  /* MIC2_DET_STS */
+#define WM8994_MIC2_DET_STS_SHIFT                    3  /* MIC2_DET_STS */
+#define WM8994_MIC2_DET_STS_WIDTH                    1  /* MIC2_DET_STS */
+#define WM8994_MIC1_SHRT_STS                    0x0004  /* MIC1_SHRT_STS */
+#define WM8994_MIC1_SHRT_STS_MASK               0x0004  /* MIC1_SHRT_STS */
+#define WM8994_MIC1_SHRT_STS_SHIFT                   2  /* MIC1_SHRT_STS */
+#define WM8994_MIC1_SHRT_STS_WIDTH                   1  /* MIC1_SHRT_STS */
+#define WM8994_MIC1_DET_STS                     0x0002  /* MIC1_DET_STS */
+#define WM8994_MIC1_DET_STS_MASK                0x0002  /* MIC1_DET_STS */
+#define WM8994_MIC1_DET_STS_SHIFT                    1  /* MIC1_DET_STS */
+#define WM8994_MIC1_DET_STS_WIDTH                    1  /* MIC1_DET_STS */
+#define WM8994_TEMP_SHUT_STS                    0x0001  /* TEMP_SHUT_STS */
+#define WM8994_TEMP_SHUT_STS_MASK               0x0001  /* TEMP_SHUT_STS */
+#define WM8994_TEMP_SHUT_STS_SHIFT                   0  /* TEMP_SHUT_STS */
+#define WM8994_TEMP_SHUT_STS_WIDTH                   1  /* TEMP_SHUT_STS */
+
+/*
+ * R1848 (0x738) - Interrupt Status 1 Mask
+ */
+#define WM8994_IM_GP11_EINT                     0x0400  /* IM_GP11_EINT */
+#define WM8994_IM_GP11_EINT_MASK                0x0400  /* IM_GP11_EINT */
+#define WM8994_IM_GP11_EINT_SHIFT                   10  /* IM_GP11_EINT */
+#define WM8994_IM_GP11_EINT_WIDTH                    1  /* IM_GP11_EINT */
+#define WM8994_IM_GP10_EINT                     0x0200  /* IM_GP10_EINT */
+#define WM8994_IM_GP10_EINT_MASK                0x0200  /* IM_GP10_EINT */
+#define WM8994_IM_GP10_EINT_SHIFT                    9  /* IM_GP10_EINT */
+#define WM8994_IM_GP10_EINT_WIDTH                    1  /* IM_GP10_EINT */
+#define WM8994_IM_GP9_EINT                      0x0100  /* IM_GP9_EINT */
+#define WM8994_IM_GP9_EINT_MASK                 0x0100  /* IM_GP9_EINT */
+#define WM8994_IM_GP9_EINT_SHIFT                     8  /* IM_GP9_EINT */
+#define WM8994_IM_GP9_EINT_WIDTH                     1  /* IM_GP9_EINT */
+#define WM8994_IM_GP8_EINT                      0x0080  /* IM_GP8_EINT */
+#define WM8994_IM_GP8_EINT_MASK                 0x0080  /* IM_GP8_EINT */
+#define WM8994_IM_GP8_EINT_SHIFT                     7  /* IM_GP8_EINT */
+#define WM8994_IM_GP8_EINT_WIDTH                     1  /* IM_GP8_EINT */
+#define WM8994_IM_GP7_EINT                      0x0040  /* IM_GP7_EINT */
+#define WM8994_IM_GP7_EINT_MASK                 0x0040  /* IM_GP7_EINT */
+#define WM8994_IM_GP7_EINT_SHIFT                     6  /* IM_GP7_EINT */
+#define WM8994_IM_GP7_EINT_WIDTH                     1  /* IM_GP7_EINT */
+#define WM8994_IM_GP6_EINT                      0x0020  /* IM_GP6_EINT */
+#define WM8994_IM_GP6_EINT_MASK                 0x0020  /* IM_GP6_EINT */
+#define WM8994_IM_GP6_EINT_SHIFT                     5  /* IM_GP6_EINT */
+#define WM8994_IM_GP6_EINT_WIDTH                     1  /* IM_GP6_EINT */
+#define WM8994_IM_GP5_EINT                      0x0010  /* IM_GP5_EINT */
+#define WM8994_IM_GP5_EINT_MASK                 0x0010  /* IM_GP5_EINT */
+#define WM8994_IM_GP5_EINT_SHIFT                     4  /* IM_GP5_EINT */
+#define WM8994_IM_GP5_EINT_WIDTH                     1  /* IM_GP5_EINT */
+#define WM8994_IM_GP4_EINT                      0x0008  /* IM_GP4_EINT */
+#define WM8994_IM_GP4_EINT_MASK                 0x0008  /* IM_GP4_EINT */
+#define WM8994_IM_GP4_EINT_SHIFT                     3  /* IM_GP4_EINT */
+#define WM8994_IM_GP4_EINT_WIDTH                     1  /* IM_GP4_EINT */
+#define WM8994_IM_GP3_EINT                      0x0004  /* IM_GP3_EINT */
+#define WM8994_IM_GP3_EINT_MASK                 0x0004  /* IM_GP3_EINT */
+#define WM8994_IM_GP3_EINT_SHIFT                     2  /* IM_GP3_EINT */
+#define WM8994_IM_GP3_EINT_WIDTH                     1  /* IM_GP3_EINT */
+#define WM8994_IM_GP2_EINT                      0x0002  /* IM_GP2_EINT */
+#define WM8994_IM_GP2_EINT_MASK                 0x0002  /* IM_GP2_EINT */
+#define WM8994_IM_GP2_EINT_SHIFT                     1  /* IM_GP2_EINT */
+#define WM8994_IM_GP2_EINT_WIDTH                     1  /* IM_GP2_EINT */
+#define WM8994_IM_GP1_EINT                      0x0001  /* IM_GP1_EINT */
+#define WM8994_IM_GP1_EINT_MASK                 0x0001  /* IM_GP1_EINT */
+#define WM8994_IM_GP1_EINT_SHIFT                     0  /* IM_GP1_EINT */
+#define WM8994_IM_GP1_EINT_WIDTH                     1  /* IM_GP1_EINT */
+
+/*
+ * R1849 (0x739) - Interrupt Status 2 Mask
+ */
+#define WM8994_IM_TEMP_WARN_EINT                0x8000  /* IM_TEMP_WARN_EINT */
+#define WM8994_IM_TEMP_WARN_EINT_MASK           0x8000  /* IM_TEMP_WARN_EINT */
+#define WM8994_IM_TEMP_WARN_EINT_SHIFT              15  /* IM_TEMP_WARN_EINT */
+#define WM8994_IM_TEMP_WARN_EINT_WIDTH               1  /* IM_TEMP_WARN_EINT */
+#define WM8994_IM_DCS_DONE_EINT                 0x4000  /* IM_DCS_DONE_EINT */
+#define WM8994_IM_DCS_DONE_EINT_MASK            0x4000  /* IM_DCS_DONE_EINT */
+#define WM8994_IM_DCS_DONE_EINT_SHIFT               14  /* IM_DCS_DONE_EINT */
+#define WM8994_IM_DCS_DONE_EINT_WIDTH                1  /* IM_DCS_DONE_EINT */
+#define WM8994_IM_WSEQ_DONE_EINT                0x2000  /* IM_WSEQ_DONE_EINT */
+#define WM8994_IM_WSEQ_DONE_EINT_MASK           0x2000  /* IM_WSEQ_DONE_EINT */
+#define WM8994_IM_WSEQ_DONE_EINT_SHIFT              13  /* IM_WSEQ_DONE_EINT */
+#define WM8994_IM_WSEQ_DONE_EINT_WIDTH               1  /* IM_WSEQ_DONE_EINT */
+#define WM8994_IM_FIFOS_ERR_EINT                0x1000  /* IM_FIFOS_ERR_EINT */
+#define WM8994_IM_FIFOS_ERR_EINT_MASK           0x1000  /* IM_FIFOS_ERR_EINT */
+#define WM8994_IM_FIFOS_ERR_EINT_SHIFT              12  /* IM_FIFOS_ERR_EINT */
+#define WM8994_IM_FIFOS_ERR_EINT_WIDTH               1  /* IM_FIFOS_ERR_EINT */
+#define WM8994_IM_AIF2DRC_SIG_DET_EINT          0x0800  /* IM_AIF2DRC_SIG_DET_EINT */
+#define WM8994_IM_AIF2DRC_SIG_DET_EINT_MASK     0x0800  /* IM_AIF2DRC_SIG_DET_EINT */
+#define WM8994_IM_AIF2DRC_SIG_DET_EINT_SHIFT        11  /* IM_AIF2DRC_SIG_DET_EINT */
+#define WM8994_IM_AIF2DRC_SIG_DET_EINT_WIDTH         1  /* IM_AIF2DRC_SIG_DET_EINT */
+#define WM8994_IM_AIF1DRC2_SIG_DET_EINT         0x0400  /* IM_AIF1DRC2_SIG_DET_EINT */
+#define WM8994_IM_AIF1DRC2_SIG_DET_EINT_MASK    0x0400  /* IM_AIF1DRC2_SIG_DET_EINT */
+#define WM8994_IM_AIF1DRC2_SIG_DET_EINT_SHIFT       10  /* IM_AIF1DRC2_SIG_DET_EINT */
+#define WM8994_IM_AIF1DRC2_SIG_DET_EINT_WIDTH        1  /* IM_AIF1DRC2_SIG_DET_EINT */
+#define WM8994_IM_AIF1DRC1_SIG_DET_EINT         0x0200  /* IM_AIF1DRC1_SIG_DET_EINT */
+#define WM8994_IM_AIF1DRC1_SIG_DET_EINT_MASK    0x0200  /* IM_AIF1DRC1_SIG_DET_EINT */
+#define WM8994_IM_AIF1DRC1_SIG_DET_EINT_SHIFT        9  /* IM_AIF1DRC1_SIG_DET_EINT */
+#define WM8994_IM_AIF1DRC1_SIG_DET_EINT_WIDTH        1  /* IM_AIF1DRC1_SIG_DET_EINT */
+#define WM8994_IM_SRC2_LOCK_EINT                0x0100  /* IM_SRC2_LOCK_EINT */
+#define WM8994_IM_SRC2_LOCK_EINT_MASK           0x0100  /* IM_SRC2_LOCK_EINT */
+#define WM8994_IM_SRC2_LOCK_EINT_SHIFT               8  /* IM_SRC2_LOCK_EINT */
+#define WM8994_IM_SRC2_LOCK_EINT_WIDTH               1  /* IM_SRC2_LOCK_EINT */
+#define WM8994_IM_SRC1_LOCK_EINT                0x0080  /* IM_SRC1_LOCK_EINT */
+#define WM8994_IM_SRC1_LOCK_EINT_MASK           0x0080  /* IM_SRC1_LOCK_EINT */
+#define WM8994_IM_SRC1_LOCK_EINT_SHIFT               7  /* IM_SRC1_LOCK_EINT */
+#define WM8994_IM_SRC1_LOCK_EINT_WIDTH               1  /* IM_SRC1_LOCK_EINT */
+#define WM8994_IM_FLL2_LOCK_EINT                0x0040  /* IM_FLL2_LOCK_EINT */
+#define WM8994_IM_FLL2_LOCK_EINT_MASK           0x0040  /* IM_FLL2_LOCK_EINT */
+#define WM8994_IM_FLL2_LOCK_EINT_SHIFT               6  /* IM_FLL2_LOCK_EINT */
+#define WM8994_IM_FLL2_LOCK_EINT_WIDTH               1  /* IM_FLL2_LOCK_EINT */
+#define WM8994_IM_FLL1_LOCK_EINT                0x0020  /* IM_FLL1_LOCK_EINT */
+#define WM8994_IM_FLL1_LOCK_EINT_MASK           0x0020  /* IM_FLL1_LOCK_EINT */
+#define WM8994_IM_FLL1_LOCK_EINT_SHIFT               5  /* IM_FLL1_LOCK_EINT */
+#define WM8994_IM_FLL1_LOCK_EINT_WIDTH               1  /* IM_FLL1_LOCK_EINT */
+#define WM8994_IM_MIC2_SHRT_EINT                0x0010  /* IM_MIC2_SHRT_EINT */
+#define WM8994_IM_MIC2_SHRT_EINT_MASK           0x0010  /* IM_MIC2_SHRT_EINT */
+#define WM8994_IM_MIC2_SHRT_EINT_SHIFT               4  /* IM_MIC2_SHRT_EINT */
+#define WM8994_IM_MIC2_SHRT_EINT_WIDTH               1  /* IM_MIC2_SHRT_EINT */
+#define WM8994_IM_MIC2_DET_EINT                 0x0008  /* IM_MIC2_DET_EINT */
+#define WM8994_IM_MIC2_DET_EINT_MASK            0x0008  /* IM_MIC2_DET_EINT */
+#define WM8994_IM_MIC2_DET_EINT_SHIFT                3  /* IM_MIC2_DET_EINT */
+#define WM8994_IM_MIC2_DET_EINT_WIDTH                1  /* IM_MIC2_DET_EINT */
+#define WM8994_IM_MIC1_SHRT_EINT                0x0004  /* IM_MIC1_SHRT_EINT */
+#define WM8994_IM_MIC1_SHRT_EINT_MASK           0x0004  /* IM_MIC1_SHRT_EINT */
+#define WM8994_IM_MIC1_SHRT_EINT_SHIFT               2  /* IM_MIC1_SHRT_EINT */
+#define WM8994_IM_MIC1_SHRT_EINT_WIDTH               1  /* IM_MIC1_SHRT_EINT */
+#define WM8994_IM_MIC1_DET_EINT                 0x0002  /* IM_MIC1_DET_EINT */
+#define WM8994_IM_MIC1_DET_EINT_MASK            0x0002  /* IM_MIC1_DET_EINT */
+#define WM8994_IM_MIC1_DET_EINT_SHIFT                1  /* IM_MIC1_DET_EINT */
+#define WM8994_IM_MIC1_DET_EINT_WIDTH                1  /* IM_MIC1_DET_EINT */
+#define WM8994_IM_TEMP_SHUT_EINT                0x0001  /* IM_TEMP_SHUT_EINT */
+#define WM8994_IM_TEMP_SHUT_EINT_MASK           0x0001  /* IM_TEMP_SHUT_EINT */
+#define WM8994_IM_TEMP_SHUT_EINT_SHIFT               0  /* IM_TEMP_SHUT_EINT */
+#define WM8994_IM_TEMP_SHUT_EINT_WIDTH               1  /* IM_TEMP_SHUT_EINT */
+
+/*
+ * R1856 (0x740) - Interrupt Control
+ */
+#define WM8994_IM_IRQ                           0x0001  /* IM_IRQ */
+#define WM8994_IM_IRQ_MASK                      0x0001  /* IM_IRQ */
+#define WM8994_IM_IRQ_SHIFT                          0  /* IM_IRQ */
+#define WM8994_IM_IRQ_WIDTH                          1  /* IM_IRQ */
+
+/*
+ * R1864 (0x748) - IRQ Debounce
+ */
+#define WM8994_TEMP_WARN_DB                     0x0020  /* TEMP_WARN_DB */
+#define WM8994_TEMP_WARN_DB_MASK                0x0020  /* TEMP_WARN_DB */
+#define WM8994_TEMP_WARN_DB_SHIFT                    5  /* TEMP_WARN_DB */
+#define WM8994_TEMP_WARN_DB_WIDTH                    1  /* TEMP_WARN_DB */
+#define WM8994_MIC2_SHRT_DB                     0x0010  /* MIC2_SHRT_DB */
+#define WM8994_MIC2_SHRT_DB_MASK                0x0010  /* MIC2_SHRT_DB */
+#define WM8994_MIC2_SHRT_DB_SHIFT                    4  /* MIC2_SHRT_DB */
+#define WM8994_MIC2_SHRT_DB_WIDTH                    1  /* MIC2_SHRT_DB */
+#define WM8994_MIC2_DET_DB                      0x0008  /* MIC2_DET_DB */
+#define WM8994_MIC2_DET_DB_MASK                 0x0008  /* MIC2_DET_DB */
+#define WM8994_MIC2_DET_DB_SHIFT                     3  /* MIC2_DET_DB */
+#define WM8994_MIC2_DET_DB_WIDTH                     1  /* MIC2_DET_DB */
+#define WM8994_MIC1_SHRT_DB                     0x0004  /* MIC1_SHRT_DB */
+#define WM8994_MIC1_SHRT_DB_MASK                0x0004  /* MIC1_SHRT_DB */
+#define WM8994_MIC1_SHRT_DB_SHIFT                    2  /* MIC1_SHRT_DB */
+#define WM8994_MIC1_SHRT_DB_WIDTH                    1  /* MIC1_SHRT_DB */
+#define WM8994_MIC1_DET_DB                      0x0002  /* MIC1_DET_DB */
+#define WM8994_MIC1_DET_DB_MASK                 0x0002  /* MIC1_DET_DB */
+#define WM8994_MIC1_DET_DB_SHIFT                     1  /* MIC1_DET_DB */
+#define WM8994_MIC1_DET_DB_WIDTH                     1  /* MIC1_DET_DB */
+#define WM8994_TEMP_SHUT_DB                     0x0001  /* TEMP_SHUT_DB */
+#define WM8994_TEMP_SHUT_DB_MASK                0x0001  /* TEMP_SHUT_DB */
+#define WM8994_TEMP_SHUT_DB_SHIFT                    0  /* TEMP_SHUT_DB */
+#define WM8994_TEMP_SHUT_DB_WIDTH                    1  /* TEMP_SHUT_DB */
+
+/*
+ * R2304 (0x900) - DSP2_Program
+ */
+#define WM8958_DSP2_ENA                         0x0001  /* DSP2_ENA */
+#define WM8958_DSP2_ENA_MASK                    0x0001  /* DSP2_ENA */
+#define WM8958_DSP2_ENA_SHIFT                        0  /* DSP2_ENA */
+#define WM8958_DSP2_ENA_WIDTH                        1  /* DSP2_ENA */
+
+/*
+ * R2305 (0x901) - DSP2_Config
+ */
+#define WM8958_MBC_SEL_MASK                     0x0030  /* MBC_SEL - [5:4] */
+#define WM8958_MBC_SEL_SHIFT                         4  /* MBC_SEL - [5:4] */
+#define WM8958_MBC_SEL_WIDTH                         2  /* MBC_SEL - [5:4] */
+#define WM8958_MBC_ENA                          0x0001  /* MBC_ENA */
+#define WM8958_MBC_ENA_MASK                     0x0001  /* MBC_ENA */
+#define WM8958_MBC_ENA_SHIFT                         0  /* MBC_ENA */
+#define WM8958_MBC_ENA_WIDTH                         1  /* MBC_ENA */
+
+/*
+ * R2560 (0xA00) - DSP2_MagicNum
+ */
+#define WM8958_DSP2_MAGIC_NUM_MASK              0xFFFF  /* DSP2_MAGIC_NUM - [15:0] */
+#define WM8958_DSP2_MAGIC_NUM_SHIFT                  0  /* DSP2_MAGIC_NUM - [15:0] */
+#define WM8958_DSP2_MAGIC_NUM_WIDTH                 16  /* DSP2_MAGIC_NUM - [15:0] */
+
+/*
+ * R2561 (0xA01) - DSP2_ReleaseYear
+ */
+#define WM8958_DSP2_RELEASE_YEAR_MASK           0xFFFF  /* DSP2_RELEASE_YEAR - [15:0] */
+#define WM8958_DSP2_RELEASE_YEAR_SHIFT               0  /* DSP2_RELEASE_YEAR - [15:0] */
+#define WM8958_DSP2_RELEASE_YEAR_WIDTH              16  /* DSP2_RELEASE_YEAR - [15:0] */
+
+/*
+ * R2562 (0xA02) - DSP2_ReleaseMonthDay
+ */
+#define WM8958_DSP2_RELEASE_MONTH_MASK          0xFF00  /* DSP2_RELEASE_MONTH - [15:8] */
+#define WM8958_DSP2_RELEASE_MONTH_SHIFT              8  /* DSP2_RELEASE_MONTH - [15:8] */
+#define WM8958_DSP2_RELEASE_MONTH_WIDTH              8  /* DSP2_RELEASE_MONTH - [15:8] */
+#define WM8958_DSP2_RELEASE_DAY_MASK            0x00FF  /* DSP2_RELEASE_DAY - [7:0] */
+#define WM8958_DSP2_RELEASE_DAY_SHIFT                0  /* DSP2_RELEASE_DAY - [7:0] */
+#define WM8958_DSP2_RELEASE_DAY_WIDTH                8  /* DSP2_RELEASE_DAY - [7:0] */
+
+/*
+ * R2563 (0xA03) - DSP2_ReleaseTime
+ */
+#define WM8958_DSP2_RELEASE_HOURS_MASK          0xFF00  /* DSP2_RELEASE_HOURS - [15:8] */
+#define WM8958_DSP2_RELEASE_HOURS_SHIFT              8  /* DSP2_RELEASE_HOURS - [15:8] */
+#define WM8958_DSP2_RELEASE_HOURS_WIDTH              8  /* DSP2_RELEASE_HOURS - [15:8] */
+#define WM8958_DSP2_RELEASE_MINS_MASK           0x00FF  /* DSP2_RELEASE_MINS - [7:0] */
+#define WM8958_DSP2_RELEASE_MINS_SHIFT               0  /* DSP2_RELEASE_MINS - [7:0] */
+#define WM8958_DSP2_RELEASE_MINS_WIDTH               8  /* DSP2_RELEASE_MINS - [7:0] */
+
+/*
+ * R2564 (0xA04) - DSP2_VerMajMin
+ */
+#define WM8958_DSP2_MAJOR_VER_MASK              0xFF00  /* DSP2_MAJOR_VER - [15:8] */
+#define WM8958_DSP2_MAJOR_VER_SHIFT                  8  /* DSP2_MAJOR_VER - [15:8] */
+#define WM8958_DSP2_MAJOR_VER_WIDTH                  8  /* DSP2_MAJOR_VER - [15:8] */
+#define WM8958_DSP2_MINOR_VER_MASK              0x00FF  /* DSP2_MINOR_VER - [7:0] */
+#define WM8958_DSP2_MINOR_VER_SHIFT                  0  /* DSP2_MINOR_VER - [7:0] */
+#define WM8958_DSP2_MINOR_VER_WIDTH                  8  /* DSP2_MINOR_VER - [7:0] */
+
+/*
+ * R2565 (0xA05) - DSP2_VerBuild
+ */
+#define WM8958_DSP2_BUILD_VER_MASK              0xFFFF  /* DSP2_BUILD_VER - [15:0] */
+#define WM8958_DSP2_BUILD_VER_SHIFT                  0  /* DSP2_BUILD_VER - [15:0] */
+#define WM8958_DSP2_BUILD_VER_WIDTH                 16  /* DSP2_BUILD_VER - [15:0] */
+
+/*
+ * R2573 (0xA0D) - DSP2_ExecControl
+ */
+#define WM8958_DSP2_STOPC                       0x0020  /* DSP2_STOPC */
+#define WM8958_DSP2_STOPC_MASK                  0x0020  /* DSP2_STOPC */
+#define WM8958_DSP2_STOPC_SHIFT                      5  /* DSP2_STOPC */
+#define WM8958_DSP2_STOPC_WIDTH                      1  /* DSP2_STOPC */
+#define WM8958_DSP2_STOPS                       0x0010  /* DSP2_STOPS */
+#define WM8958_DSP2_STOPS_MASK                  0x0010  /* DSP2_STOPS */
+#define WM8958_DSP2_STOPS_SHIFT                      4  /* DSP2_STOPS */
+#define WM8958_DSP2_STOPS_WIDTH                      1  /* DSP2_STOPS */
+#define WM8958_DSP2_STOPI                       0x0008  /* DSP2_STOPI */
+#define WM8958_DSP2_STOPI_MASK                  0x0008  /* DSP2_STOPI */
+#define WM8958_DSP2_STOPI_SHIFT                      3  /* DSP2_STOPI */
+#define WM8958_DSP2_STOPI_WIDTH                      1  /* DSP2_STOPI */
+#define WM8958_DSP2_STOP                        0x0004  /* DSP2_STOP */
+#define WM8958_DSP2_STOP_MASK                   0x0004  /* DSP2_STOP */
+#define WM8958_DSP2_STOP_SHIFT                       2  /* DSP2_STOP */
+#define WM8958_DSP2_STOP_WIDTH                       1  /* DSP2_STOP */
+#define WM8958_DSP2_RUNR                        0x0002  /* DSP2_RUNR */
+#define WM8958_DSP2_RUNR_MASK                   0x0002  /* DSP2_RUNR */
+#define WM8958_DSP2_RUNR_SHIFT                       1  /* DSP2_RUNR */
+#define WM8958_DSP2_RUNR_WIDTH                       1  /* DSP2_RUNR */
+#define WM8958_DSP2_RUN                         0x0001  /* DSP2_RUN */
+#define WM8958_DSP2_RUN_MASK                    0x0001  /* DSP2_RUN */
+#define WM8958_DSP2_RUN_SHIFT                        0  /* DSP2_RUN */
+#define WM8958_DSP2_RUN_WIDTH                        1  /* DSP2_RUN */
+
+#endif
diff --git a/include/linux/mg_disk.h b/include/linux/mg_disk.h
new file mode 100644
index 00000000..e11f4d9f
--- /dev/null
+++ b/include/linux/mg_disk.h
@@ -0,0 +1,45 @@
+/*
+ *  include/linux/mg_disk.c
+ *
+ *  Private data for mflash platform driver
+ *
+ * (c) 2008 mGine Co.,LTD
+ * (c) 2008 unsik Kim <donari75@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __MG_DISK_H__
+#define __MG_DISK_H__
+
+/* name for platform device */
+#define MG_DEV_NAME "mg_disk"
+
+/* names of GPIO resource */
+#define MG_RST_PIN	"mg_rst"
+/* except MG_BOOT_DEV, reset-out pin should be assigned */
+#define MG_RSTOUT_PIN	"mg_rstout"
+
+/* device attribution */
+/* use mflash as boot device */
+#define MG_BOOT_DEV		(1 << 0)
+/* use mflash as storage device */
+#define MG_STORAGE_DEV		(1 << 1)
+/* same as MG_STORAGE_DEV, but bootloader already done reset sequence */
+#define MG_STORAGE_DEV_SKIP_RST	(1 << 2)
+
+/* private driver data */
+struct mg_drv_data {
+	/* disk resource */
+	u32 use_polling;
+
+	/* device attribution */
+	u32 dev_attr;
+
+	/* internally used */
+	void *host;
+};
+
+#endif
diff --git a/include/linux/micrel_phy.h b/include/linux/micrel_phy.h
new file mode 100644
index 00000000..dd8da342
--- /dev/null
+++ b/include/linux/micrel_phy.h
@@ -0,0 +1,16 @@
+#ifndef _MICREL_PHY_H
+#define _MICREL_PHY_H
+
+#define MICREL_PHY_ID_MASK	0x00fffff0
+
+#define PHY_ID_KSZ9021		0x00221611
+#define PHY_ID_KS8737		0x00221720
+#define PHY_ID_KS8041		0x00221510
+#define PHY_ID_KS8051		0x00221550
+/* both for ks8001 Rev. A/B, and for ks8721 Rev 3. */
+#define PHY_ID_KS8001		0x0022161A
+
+/* struct phy_device dev_flags definitions */
+#define MICREL_PHY_50MHZ_CLK	0x00000001
+
+#endif /* _MICREL_PHY_H */
diff --git a/include/linux/migrate.h b/include/linux/migrate.h
new file mode 100644
index 00000000..855c337b
--- /dev/null
+++ b/include/linux/migrate.h
@@ -0,0 +1,67 @@
+#ifndef _LINUX_MIGRATE_H
+#define _LINUX_MIGRATE_H
+
+#include <linux/mm.h>
+#include <linux/mempolicy.h>
+#include <linux/migrate_mode.h>
+
+typedef struct page *new_page_t(struct page *, unsigned long private, int **);
+
+#ifdef CONFIG_MIGRATION
+
+extern void putback_lru_pages(struct list_head *l);
+extern int migrate_page(struct address_space *,
+			struct page *, struct page *, enum migrate_mode);
+extern int migrate_pages(struct list_head *l, new_page_t x,
+			unsigned long private, bool offlining,
+			enum migrate_mode mode);
+extern int migrate_huge_pages(struct list_head *l, new_page_t x,
+			unsigned long private, bool offlining,
+			enum migrate_mode mode);
+
+extern int fail_migrate_page(struct address_space *,
+			struct page *, struct page *);
+
+extern int migrate_prep(void);
+extern int migrate_prep_local(void);
+extern int migrate_vmas(struct mm_struct *mm,
+		const nodemask_t *from, const nodemask_t *to,
+		unsigned long flags);
+extern void migrate_page_copy(struct page *newpage, struct page *page);
+extern int migrate_huge_page_move_mapping(struct address_space *mapping,
+				  struct page *newpage, struct page *page);
+#else
+
+static inline void putback_lru_pages(struct list_head *l) {}
+static inline int migrate_pages(struct list_head *l, new_page_t x,
+		unsigned long private, bool offlining,
+		enum migrate_mode mode) { return -ENOSYS; }
+static inline int migrate_huge_pages(struct list_head *l, new_page_t x,
+		unsigned long private, bool offlining,
+		enum migrate_mode mode) { return -ENOSYS; }
+
+static inline int migrate_prep(void) { return -ENOSYS; }
+static inline int migrate_prep_local(void) { return -ENOSYS; }
+
+static inline int migrate_vmas(struct mm_struct *mm,
+		const nodemask_t *from, const nodemask_t *to,
+		unsigned long flags)
+{
+	return -ENOSYS;
+}
+
+static inline void migrate_page_copy(struct page *newpage,
+				     struct page *page) {}
+
+static inline int migrate_huge_page_move_mapping(struct address_space *mapping,
+				  struct page *newpage, struct page *page)
+{
+	return -ENOSYS;
+}
+
+/* Possible settings for the migrate_page() method in address_operations */
+#define migrate_page NULL
+#define fail_migrate_page NULL
+
+#endif /* CONFIG_MIGRATION */
+#endif /* _LINUX_MIGRATE_H */
diff --git a/include/linux/migrate_mode.h b/include/linux/migrate_mode.h
new file mode 100644
index 00000000..ebf3d89a
--- /dev/null
+++ b/include/linux/migrate_mode.h
@@ -0,0 +1,16 @@
+#ifndef MIGRATE_MODE_H_INCLUDED
+#define MIGRATE_MODE_H_INCLUDED
+/*
+ * MIGRATE_ASYNC means never block
+ * MIGRATE_SYNC_LIGHT in the current implementation means to allow blocking
+ *	on most operations but not ->writepage as the potential stall time
+ *	is too significant
+ * MIGRATE_SYNC will block when migrating pages
+ */
+enum migrate_mode {
+	MIGRATE_ASYNC,
+	MIGRATE_SYNC_LIGHT,
+	MIGRATE_SYNC,
+};
+
+#endif		/* MIGRATE_MODE_H_INCLUDED */
diff --git a/include/linux/mii.h b/include/linux/mii.h
new file mode 100644
index 00000000..2783eca6
--- /dev/null
+++ b/include/linux/mii.h
@@ -0,0 +1,482 @@
+/*
+ * linux/mii.h: definitions for MII-compatible transceivers
+ * Originally drivers/net/sunhme.h.
+ *
+ * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef __LINUX_MII_H__
+#define __LINUX_MII_H__
+
+#include <linux/types.h>
+#include <linux/ethtool.h>
+
+/* Generic MII registers. */
+#define MII_BMCR		0x00	/* Basic mode control register */
+#define MII_BMSR		0x01	/* Basic mode status register  */
+#define MII_PHYSID1		0x02	/* PHYS ID 1                   */
+#define MII_PHYSID2		0x03	/* PHYS ID 2                   */
+#define MII_ADVERTISE		0x04	/* Advertisement control reg   */
+#define MII_LPA			0x05	/* Link partner ability reg    */
+#define MII_EXPANSION		0x06	/* Expansion register          */
+#define MII_CTRL1000		0x09	/* 1000BASE-T control          */
+#define MII_STAT1000		0x0a	/* 1000BASE-T status           */
+#define MII_ESTATUS		0x0f	/* Extended Status             */
+#define MII_DCOUNTER		0x12	/* Disconnect counter          */
+#define MII_FCSCOUNTER		0x13	/* False carrier counter       */
+#define MII_NWAYTEST		0x14	/* N-way auto-neg test reg     */
+#define MII_RERRCOUNTER		0x15	/* Receive error counter       */
+#define MII_SREVISION		0x16	/* Silicon revision            */
+#define MII_RESV1		0x17	/* Reserved...                 */
+#define MII_LBRERROR		0x18	/* Lpback, rx, bypass error    */
+#define MII_PHYADDR		0x19	/* PHY address                 */
+#define MII_RESV2		0x1a	/* Reserved...                 */
+#define MII_TPISTATUS		0x1b	/* TPI status for 10mbps       */
+#define MII_NCONFIG		0x1c	/* Network interface config    */
+
+/* Basic mode control register. */
+#define BMCR_RESV		0x003f	/* Unused...                   */
+#define BMCR_SPEED1000		0x0040	/* MSB of Speed (1000)         */
+#define BMCR_CTST		0x0080	/* Collision test              */
+#define BMCR_FULLDPLX		0x0100	/* Full duplex                 */
+#define BMCR_ANRESTART		0x0200	/* Auto negotiation restart    */
+#define BMCR_ISOLATE		0x0400	/* Isolate data paths from MII */
+#define BMCR_PDOWN		0x0800	/* Enable low power state      */
+#define BMCR_ANENABLE		0x1000	/* Enable auto negotiation     */
+#define BMCR_SPEED100		0x2000	/* Select 100Mbps              */
+#define BMCR_LOOPBACK		0x4000	/* TXD loopback bits           */
+#define BMCR_RESET		0x8000	/* Reset to default state      */
+
+/* Basic mode status register. */
+#define BMSR_ERCAP		0x0001	/* Ext-reg capability          */
+#define BMSR_JCD		0x0002	/* Jabber detected             */
+#define BMSR_LSTATUS		0x0004	/* Link status                 */
+#define BMSR_ANEGCAPABLE	0x0008	/* Able to do auto-negotiation */
+#define BMSR_RFAULT		0x0010	/* Remote fault detected       */
+#define BMSR_ANEGCOMPLETE	0x0020	/* Auto-negotiation complete   */
+#define BMSR_RESV		0x00c0	/* Unused...                   */
+#define BMSR_ESTATEN		0x0100	/* Extended Status in R15      */
+#define BMSR_100HALF2		0x0200	/* Can do 100BASE-T2 HDX       */
+#define BMSR_100FULL2		0x0400	/* Can do 100BASE-T2 FDX       */
+#define BMSR_10HALF		0x0800	/* Can do 10mbps, half-duplex  */
+#define BMSR_10FULL		0x1000	/* Can do 10mbps, full-duplex  */
+#define BMSR_100HALF		0x2000	/* Can do 100mbps, half-duplex */
+#define BMSR_100FULL		0x4000	/* Can do 100mbps, full-duplex */
+#define BMSR_100BASE4		0x8000	/* Can do 100mbps, 4k packets  */
+
+/* Advertisement control register. */
+#define ADVERTISE_SLCT		0x001f	/* Selector bits               */
+#define ADVERTISE_CSMA		0x0001	/* Only selector supported     */
+#define ADVERTISE_10HALF	0x0020	/* Try for 10mbps half-duplex  */
+#define ADVERTISE_1000XFULL	0x0020	/* Try for 1000BASE-X full-duplex */
+#define ADVERTISE_10FULL	0x0040	/* Try for 10mbps full-duplex  */
+#define ADVERTISE_1000XHALF	0x0040	/* Try for 1000BASE-X half-duplex */
+#define ADVERTISE_100HALF	0x0080	/* Try for 100mbps half-duplex */
+#define ADVERTISE_1000XPAUSE	0x0080	/* Try for 1000BASE-X pause    */
+#define ADVERTISE_100FULL	0x0100	/* Try for 100mbps full-duplex */
+#define ADVERTISE_1000XPSE_ASYM	0x0100	/* Try for 1000BASE-X asym pause */
+#define ADVERTISE_100BASE4	0x0200	/* Try for 100mbps 4k packets  */
+#define ADVERTISE_PAUSE_CAP	0x0400	/* Try for pause               */
+#define ADVERTISE_PAUSE_ASYM	0x0800	/* Try for asymetric pause     */
+#define ADVERTISE_RESV		0x1000	/* Unused...                   */
+#define ADVERTISE_RFAULT	0x2000	/* Say we can detect faults    */
+#define ADVERTISE_LPACK		0x4000	/* Ack link partners response  */
+#define ADVERTISE_NPAGE		0x8000	/* Next page bit               */
+
+#define ADVERTISE_FULL		(ADVERTISE_100FULL | ADVERTISE_10FULL | \
+				  ADVERTISE_CSMA)
+#define ADVERTISE_ALL		(ADVERTISE_10HALF | ADVERTISE_10FULL | \
+				  ADVERTISE_100HALF | ADVERTISE_100FULL)
+
+/* Link partner ability register. */
+#define LPA_SLCT		0x001f	/* Same as advertise selector  */
+#define LPA_10HALF		0x0020	/* Can do 10mbps half-duplex   */
+#define LPA_1000XFULL		0x0020	/* Can do 1000BASE-X full-duplex */
+#define LPA_10FULL		0x0040	/* Can do 10mbps full-duplex   */
+#define LPA_1000XHALF		0x0040	/* Can do 1000BASE-X half-duplex */
+#define LPA_100HALF		0x0080	/* Can do 100mbps half-duplex  */
+#define LPA_1000XPAUSE		0x0080	/* Can do 1000BASE-X pause     */
+#define LPA_100FULL		0x0100	/* Can do 100mbps full-duplex  */
+#define LPA_1000XPAUSE_ASYM	0x0100	/* Can do 1000BASE-X pause asym*/
+#define LPA_100BASE4		0x0200	/* Can do 100mbps 4k packets   */
+#define LPA_PAUSE_CAP		0x0400	/* Can pause                   */
+#define LPA_PAUSE_ASYM		0x0800	/* Can pause asymetrically     */
+#define LPA_RESV		0x1000	/* Unused...                   */
+#define LPA_RFAULT		0x2000	/* Link partner faulted        */
+#define LPA_LPACK		0x4000	/* Link partner acked us       */
+#define LPA_NPAGE		0x8000	/* Next page bit               */
+
+#define LPA_DUPLEX		(LPA_10FULL | LPA_100FULL)
+#define LPA_100			(LPA_100FULL | LPA_100HALF | LPA_100BASE4)
+
+/* Expansion register for auto-negotiation. */
+#define EXPANSION_NWAY		0x0001	/* Can do N-way auto-nego      */
+#define EXPANSION_LCWP		0x0002	/* Got new RX page code word   */
+#define EXPANSION_ENABLENPAGE	0x0004	/* This enables npage words    */
+#define EXPANSION_NPCAPABLE	0x0008	/* Link partner supports npage */
+#define EXPANSION_MFAULTS	0x0010	/* Multiple faults detected    */
+#define EXPANSION_RESV		0xffe0	/* Unused...                   */
+
+#define ESTATUS_1000_TFULL	0x2000	/* Can do 1000BT Full          */
+#define ESTATUS_1000_THALF	0x1000	/* Can do 1000BT Half          */
+
+/* N-way test register. */
+#define NWAYTEST_RESV1		0x00ff	/* Unused...                   */
+#define NWAYTEST_LOOPBACK	0x0100	/* Enable loopback for N-way   */
+#define NWAYTEST_RESV2		0xfe00	/* Unused...                   */
+
+/* 1000BASE-T Control register */
+#define ADVERTISE_1000FULL	0x0200  /* Advertise 1000BASE-T full duplex */
+#define ADVERTISE_1000HALF	0x0100  /* Advertise 1000BASE-T half duplex */
+#define CTL1000_AS_MASTER	0x0800
+#define CTL1000_ENABLE_MASTER	0x1000
+
+/* 1000BASE-T Status register */
+#define LPA_1000LOCALRXOK	0x2000	/* Link partner local receiver status */
+#define LPA_1000REMRXOK		0x1000	/* Link partner remote receiver status */
+#define LPA_1000FULL		0x0800	/* Link partner 1000BASE-T full duplex */
+#define LPA_1000HALF		0x0400	/* Link partner 1000BASE-T half duplex */
+
+/* Flow control flags */
+#define FLOW_CTRL_TX		0x01
+#define FLOW_CTRL_RX		0x02
+
+/* This structure is used in all SIOCxMIIxxx ioctl calls */
+struct mii_ioctl_data {
+	__u16		phy_id;
+	__u16		reg_num;
+	__u16		val_in;
+	__u16		val_out;
+};
+
+#ifdef __KERNEL__
+
+#include <linux/if.h>
+
+struct ethtool_cmd;
+
+struct mii_if_info {
+	int phy_id;
+	int advertising;
+	int phy_id_mask;
+	int reg_num_mask;
+
+	unsigned int full_duplex : 1;	/* is full duplex? */
+	unsigned int force_media : 1;	/* is autoneg. disabled? */
+	unsigned int supports_gmii : 1; /* are GMII registers supported? */
+
+	struct net_device *dev;
+	int (*mdio_read) (struct net_device *dev, int phy_id, int location);
+	void (*mdio_write) (struct net_device *dev, int phy_id, int location, int val);
+};
+
+extern int mii_link_ok (struct mii_if_info *mii);
+extern int mii_nway_restart (struct mii_if_info *mii);
+extern int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd);
+extern int mii_ethtool_sset(struct mii_if_info *mii, struct ethtool_cmd *ecmd);
+extern int mii_check_gmii_support(struct mii_if_info *mii);
+extern void mii_check_link (struct mii_if_info *mii);
+extern unsigned int mii_check_media (struct mii_if_info *mii,
+				     unsigned int ok_to_print,
+				     unsigned int init_media);
+extern int generic_mii_ioctl(struct mii_if_info *mii_if,
+			     struct mii_ioctl_data *mii_data, int cmd,
+			     unsigned int *duplex_changed);
+
+
+static inline struct mii_ioctl_data *if_mii(struct ifreq *rq)
+{
+	return (struct mii_ioctl_data *) &rq->ifr_ifru;
+}
+
+/**
+ * mii_nway_result
+ * @negotiated: value of MII ANAR and'd with ANLPAR
+ *
+ * Given a set of MII abilities, check each bit and returns the
+ * currently supported media, in the priority order defined by
+ * IEEE 802.3u.  We use LPA_xxx constants but note this is not the
+ * value of LPA solely, as described above.
+ *
+ * The one exception to IEEE 802.3u is that 100baseT4 is placed
+ * between 100T-full and 100T-half.  If your phy does not support
+ * 100T4 this is fine.  If your phy places 100T4 elsewhere in the
+ * priority order, you will need to roll your own function.
+ */
+static inline unsigned int mii_nway_result (unsigned int negotiated)
+{
+	unsigned int ret;
+
+	if (negotiated & LPA_100FULL)
+		ret = LPA_100FULL;
+	else if (negotiated & LPA_100BASE4)
+		ret = LPA_100BASE4;
+	else if (negotiated & LPA_100HALF)
+		ret = LPA_100HALF;
+	else if (negotiated & LPA_10FULL)
+		ret = LPA_10FULL;
+	else
+		ret = LPA_10HALF;
+
+	return ret;
+}
+
+/**
+ * mii_duplex
+ * @duplex_lock: Non-zero if duplex is locked at full
+ * @negotiated: value of MII ANAR and'd with ANLPAR
+ *
+ * A small helper function for a common case.  Returns one
+ * if the media is operating or locked at full duplex, and
+ * returns zero otherwise.
+ */
+static inline unsigned int mii_duplex (unsigned int duplex_lock,
+				       unsigned int negotiated)
+{
+	if (duplex_lock)
+		return 1;
+	if (mii_nway_result(negotiated) & LPA_DUPLEX)
+		return 1;
+	return 0;
+}
+
+/**
+ * ethtool_adv_to_mii_adv_t
+ * @ethadv: the ethtool advertisement settings
+ *
+ * A small helper function that translates ethtool advertisement
+ * settings to phy autonegotiation advertisements for the
+ * MII_ADVERTISE register.
+ */
+static inline u32 ethtool_adv_to_mii_adv_t(u32 ethadv)
+{
+	u32 result = 0;
+
+	if (ethadv & ADVERTISED_10baseT_Half)
+		result |= ADVERTISE_10HALF;
+	if (ethadv & ADVERTISED_10baseT_Full)
+		result |= ADVERTISE_10FULL;
+	if (ethadv & ADVERTISED_100baseT_Half)
+		result |= ADVERTISE_100HALF;
+	if (ethadv & ADVERTISED_100baseT_Full)
+		result |= ADVERTISE_100FULL;
+	if (ethadv & ADVERTISED_Pause)
+		result |= ADVERTISE_PAUSE_CAP;
+	if (ethadv & ADVERTISED_Asym_Pause)
+		result |= ADVERTISE_PAUSE_ASYM;
+
+	return result;
+}
+
+/**
+ * mii_adv_to_ethtool_adv_t
+ * @adv: value of the MII_ADVERTISE register
+ *
+ * A small helper function that translates MII_ADVERTISE bits
+ * to ethtool advertisement settings.
+ */
+static inline u32 mii_adv_to_ethtool_adv_t(u32 adv)
+{
+	u32 result = 0;
+
+	if (adv & ADVERTISE_10HALF)
+		result |= ADVERTISED_10baseT_Half;
+	if (adv & ADVERTISE_10FULL)
+		result |= ADVERTISED_10baseT_Full;
+	if (adv & ADVERTISE_100HALF)
+		result |= ADVERTISED_100baseT_Half;
+	if (adv & ADVERTISE_100FULL)
+		result |= ADVERTISED_100baseT_Full;
+	if (adv & ADVERTISE_PAUSE_CAP)
+		result |= ADVERTISED_Pause;
+	if (adv & ADVERTISE_PAUSE_ASYM)
+		result |= ADVERTISED_Asym_Pause;
+
+	return result;
+}
+
+/**
+ * ethtool_adv_to_mii_ctrl1000_t
+ * @ethadv: the ethtool advertisement settings
+ *
+ * A small helper function that translates ethtool advertisement
+ * settings to phy autonegotiation advertisements for the
+ * MII_CTRL1000 register when in 1000T mode.
+ */
+static inline u32 ethtool_adv_to_mii_ctrl1000_t(u32 ethadv)
+{
+	u32 result = 0;
+
+	if (ethadv & ADVERTISED_1000baseT_Half)
+		result |= ADVERTISE_1000HALF;
+	if (ethadv & ADVERTISED_1000baseT_Full)
+		result |= ADVERTISE_1000FULL;
+
+	return result;
+}
+
+/**
+ * mii_ctrl1000_to_ethtool_adv_t
+ * @adv: value of the MII_CTRL1000 register
+ *
+ * A small helper function that translates MII_CTRL1000
+ * bits, when in 1000Base-T mode, to ethtool
+ * advertisement settings.
+ */
+static inline u32 mii_ctrl1000_to_ethtool_adv_t(u32 adv)
+{
+	u32 result = 0;
+
+	if (adv & ADVERTISE_1000HALF)
+		result |= ADVERTISED_1000baseT_Half;
+	if (adv & ADVERTISE_1000FULL)
+		result |= ADVERTISED_1000baseT_Full;
+
+	return result;
+}
+
+/**
+ * mii_lpa_to_ethtool_lpa_t
+ * @adv: value of the MII_LPA register
+ *
+ * A small helper function that translates MII_LPA
+ * bits, when in 1000Base-T mode, to ethtool
+ * LP advertisement settings.
+ */
+static inline u32 mii_lpa_to_ethtool_lpa_t(u32 lpa)
+{
+	u32 result = 0;
+
+	if (lpa & LPA_LPACK)
+		result |= ADVERTISED_Autoneg;
+
+	return result | mii_adv_to_ethtool_adv_t(lpa);
+}
+
+/**
+ * mii_stat1000_to_ethtool_lpa_t
+ * @adv: value of the MII_STAT1000 register
+ *
+ * A small helper function that translates MII_STAT1000
+ * bits, when in 1000Base-T mode, to ethtool
+ * advertisement settings.
+ */
+static inline u32 mii_stat1000_to_ethtool_lpa_t(u32 lpa)
+{
+	u32 result = 0;
+
+	if (lpa & LPA_1000HALF)
+		result |= ADVERTISED_1000baseT_Half;
+	if (lpa & LPA_1000FULL)
+		result |= ADVERTISED_1000baseT_Full;
+
+	return result;
+}
+
+/**
+ * ethtool_adv_to_mii_adv_x
+ * @ethadv: the ethtool advertisement settings
+ *
+ * A small helper function that translates ethtool advertisement
+ * settings to phy autonegotiation advertisements for the
+ * MII_CTRL1000 register when in 1000Base-X mode.
+ */
+static inline u32 ethtool_adv_to_mii_adv_x(u32 ethadv)
+{
+	u32 result = 0;
+
+	if (ethadv & ADVERTISED_1000baseT_Half)
+		result |= ADVERTISE_1000XHALF;
+	if (ethadv & ADVERTISED_1000baseT_Full)
+		result |= ADVERTISE_1000XFULL;
+	if (ethadv & ADVERTISED_Pause)
+		result |= ADVERTISE_1000XPAUSE;
+	if (ethadv & ADVERTISED_Asym_Pause)
+		result |= ADVERTISE_1000XPSE_ASYM;
+
+	return result;
+}
+
+/**
+ * mii_adv_to_ethtool_adv_x
+ * @adv: value of the MII_CTRL1000 register
+ *
+ * A small helper function that translates MII_CTRL1000
+ * bits, when in 1000Base-X mode, to ethtool
+ * advertisement settings.
+ */
+static inline u32 mii_adv_to_ethtool_adv_x(u32 adv)
+{
+	u32 result = 0;
+
+	if (adv & ADVERTISE_1000XHALF)
+		result |= ADVERTISED_1000baseT_Half;
+	if (adv & ADVERTISE_1000XFULL)
+		result |= ADVERTISED_1000baseT_Full;
+	if (adv & ADVERTISE_1000XPAUSE)
+		result |= ADVERTISED_Pause;
+	if (adv & ADVERTISE_1000XPSE_ASYM)
+		result |= ADVERTISED_Asym_Pause;
+
+	return result;
+}
+
+/**
+ * mii_lpa_to_ethtool_lpa_x
+ * @adv: value of the MII_LPA register
+ *
+ * A small helper function that translates MII_LPA
+ * bits, when in 1000Base-X mode, to ethtool
+ * LP advertisement settings.
+ */
+static inline u32 mii_lpa_to_ethtool_lpa_x(u32 lpa)
+{
+	u32 result = 0;
+
+	if (lpa & LPA_LPACK)
+		result |= ADVERTISED_Autoneg;
+
+	return result | mii_adv_to_ethtool_adv_x(lpa);
+}
+
+/**
+ * mii_advertise_flowctrl - get flow control advertisement flags
+ * @cap: Flow control capabilities (FLOW_CTRL_RX, FLOW_CTRL_TX or both)
+ */
+static inline u16 mii_advertise_flowctrl(int cap)
+{
+	u16 adv = 0;
+
+	if (cap & FLOW_CTRL_RX)
+		adv = ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
+	if (cap & FLOW_CTRL_TX)
+		adv ^= ADVERTISE_PAUSE_ASYM;
+
+	return adv;
+}
+
+/**
+ * mii_resolve_flowctrl_fdx
+ * @lcladv: value of MII ADVERTISE register
+ * @rmtadv: value of MII LPA register
+ *
+ * Resolve full duplex flow control as per IEEE 802.3-2005 table 28B-3
+ */
+static inline u8 mii_resolve_flowctrl_fdx(u16 lcladv, u16 rmtadv)
+{
+	u8 cap = 0;
+
+	if (lcladv & rmtadv & ADVERTISE_PAUSE_CAP) {
+		cap = FLOW_CTRL_TX | FLOW_CTRL_RX;
+	} else if (lcladv & rmtadv & ADVERTISE_PAUSE_ASYM) {
+		if (lcladv & ADVERTISE_PAUSE_CAP)
+			cap = FLOW_CTRL_RX;
+		else if (rmtadv & ADVERTISE_PAUSE_CAP)
+			cap = FLOW_CTRL_TX;
+	}
+
+	return cap;
+}
+
+#endif /* __KERNEL__ */
+#endif /* __LINUX_MII_H__ */
diff --git a/include/linux/minix_fs.h b/include/linux/minix_fs.h
new file mode 100644
index 00000000..13fe09e0
--- /dev/null
+++ b/include/linux/minix_fs.h
@@ -0,0 +1,106 @@
+#ifndef _LINUX_MINIX_FS_H
+#define _LINUX_MINIX_FS_H
+
+#include <linux/types.h>
+#include <linux/magic.h>
+
+/*
+ * The minix filesystem constants/structures
+ */
+
+/*
+ * Thanks to Kees J Bot for sending me the definitions of the new
+ * minix filesystem (aka V2) with bigger inodes and 32-bit block
+ * pointers.
+ */
+
+#define MINIX_ROOT_INO 1
+
+/* Not the same as the bogus LINK_MAX in <linux/limits.h>. Oh well. */
+#define MINIX_LINK_MAX	250
+#define MINIX2_LINK_MAX	65530
+
+#define MINIX_I_MAP_SLOTS	8
+#define MINIX_Z_MAP_SLOTS	64
+#define MINIX_VALID_FS		0x0001		/* Clean fs. */
+#define MINIX_ERROR_FS		0x0002		/* fs has errors. */
+
+#define MINIX_INODES_PER_BLOCK ((BLOCK_SIZE)/(sizeof (struct minix_inode)))
+
+/*
+ * This is the original minix inode layout on disk.
+ * Note the 8-bit gid and atime and ctime.
+ */
+struct minix_inode {
+	__u16 i_mode;
+	__u16 i_uid;
+	__u32 i_size;
+	__u32 i_time;
+	__u8  i_gid;
+	__u8  i_nlinks;
+	__u16 i_zone[9];
+};
+
+/*
+ * The new minix inode has all the time entries, as well as
+ * long block numbers and a third indirect block (7+1+1+1
+ * instead of 7+1+1). Also, some previously 8-bit values are
+ * now 16-bit. The inode is now 64 bytes instead of 32.
+ */
+struct minix2_inode {
+	__u16 i_mode;
+	__u16 i_nlinks;
+	__u16 i_uid;
+	__u16 i_gid;
+	__u32 i_size;
+	__u32 i_atime;
+	__u32 i_mtime;
+	__u32 i_ctime;
+	__u32 i_zone[10];
+};
+
+/*
+ * minix super-block data on disk
+ */
+struct minix_super_block {
+	__u16 s_ninodes;
+	__u16 s_nzones;
+	__u16 s_imap_blocks;
+	__u16 s_zmap_blocks;
+	__u16 s_firstdatazone;
+	__u16 s_log_zone_size;
+	__u32 s_max_size;
+	__u16 s_magic;
+	__u16 s_state;
+	__u32 s_zones;
+};
+
+/*
+ * V3 minix super-block data on disk
+ */
+struct minix3_super_block {
+	__u32 s_ninodes;
+	__u16 s_pad0;
+	__u16 s_imap_blocks;
+	__u16 s_zmap_blocks;
+	__u16 s_firstdatazone;
+	__u16 s_log_zone_size;
+	__u16 s_pad1;
+	__u32 s_max_size;
+	__u32 s_zones;
+	__u16 s_magic;
+	__u16 s_pad2;
+	__u16 s_blocksize;
+	__u8  s_disk_version;
+};
+
+struct minix_dir_entry {
+	__u16 inode;
+	char name[0];
+};
+
+struct minix3_dir_entry {
+	__u32 inode;
+	char name[0];
+};
+#endif
diff --git a/include/linux/miscdevice.h b/include/linux/miscdevice.h
new file mode 100644
index 00000000..0549d211
--- /dev/null
+++ b/include/linux/miscdevice.h
@@ -0,0 +1,67 @@
+#ifndef _LINUX_MISCDEVICE_H
+#define _LINUX_MISCDEVICE_H
+#include <linux/major.h>
+#include <linux/list.h>
+#include <linux/types.h>
+
+/*
+ *	These allocations are managed by device@lanana.org. If you use an
+ *	entry that is not in assigned your entry may well be moved and
+ *	reassigned, or set dynamic if a fixed value is not justified.
+ */
+
+#define PSMOUSE_MINOR		1
+#define MS_BUSMOUSE_MINOR	2
+#define ATIXL_BUSMOUSE_MINOR	3
+/*#define AMIGAMOUSE_MINOR	4	FIXME OBSOLETE */
+#define ATARIMOUSE_MINOR	5
+#define SUN_MOUSE_MINOR		6
+#define APOLLO_MOUSE_MINOR	7
+#define PC110PAD_MINOR		9
+/*#define ADB_MOUSE_MINOR	10	FIXME OBSOLETE */
+#define WATCHDOG_MINOR		130	/* Watchdog timer     */
+#define TEMP_MINOR		131	/* Temperature Sensor */
+#define RTC_MINOR		135
+#define EFI_RTC_MINOR		136	/* EFI Time services */
+#define SUN_OPENPROM_MINOR	139
+#define DMAPI_MINOR		140	/* DMAPI */
+#define NVRAM_MINOR		144
+#define SGI_MMTIMER		153
+#define STORE_QUEUE_MINOR	155
+#define I2O_MINOR		166
+#define MICROCODE_MINOR		184
+#define TUN_MINOR		200
+#define MWAVE_MINOR		219	/* ACP/Mwave Modem */
+#define MPT_MINOR		220
+#define MPT2SAS_MINOR		221
+#define UINPUT_MINOR		223
+#define HPET_MINOR		228
+#define FUSE_MINOR		229
+#define KVM_MINOR		232
+#define BTRFS_MINOR		234
+#define AUTOFS_MINOR		235
+#define MAPPER_CTRL_MINOR	236
+#define LOOP_CTRL_MINOR		237
+#define VHOST_NET_MINOR		238
+#define MISC_DYNAMIC_MINOR	255
+
+struct device;
+
+struct miscdevice  {
+	int minor;
+	const char *name;
+	const struct file_operations *fops;
+	struct list_head list;
+	struct device *parent;
+	struct device *this_device;
+	const char *nodename;
+	umode_t mode;
+};
+
+extern int misc_register(struct miscdevice * misc);
+extern int misc_deregister(struct miscdevice *misc);
+
+#define MODULE_ALIAS_MISCDEV(minor)				\
+	MODULE_ALIAS("char-major-" __stringify(MISC_MAJOR)	\
+	"-" __stringify(minor))
+#endif
diff --git a/include/linux/mlx4/cmd.h b/include/linux/mlx4/cmd.h
new file mode 100644
index 00000000..9958ff2c
--- /dev/null
+++ b/include/linux/mlx4/cmd.h
@@ -0,0 +1,230 @@
+/*
+ * Copyright (c) 2006 Cisco Systems, Inc.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef MLX4_CMD_H
+#define MLX4_CMD_H
+
+#include <linux/dma-mapping.h>
+
+enum {
+	/* initialization and general commands */
+	MLX4_CMD_SYS_EN		 = 0x1,
+	MLX4_CMD_SYS_DIS	 = 0x2,
+	MLX4_CMD_MAP_FA		 = 0xfff,
+	MLX4_CMD_UNMAP_FA	 = 0xffe,
+	MLX4_CMD_RUN_FW		 = 0xff6,
+	MLX4_CMD_MOD_STAT_CFG	 = 0x34,
+	MLX4_CMD_QUERY_DEV_CAP	 = 0x3,
+	MLX4_CMD_QUERY_FW	 = 0x4,
+	MLX4_CMD_ENABLE_LAM	 = 0xff8,
+	MLX4_CMD_DISABLE_LAM	 = 0xff7,
+	MLX4_CMD_QUERY_DDR	 = 0x5,
+	MLX4_CMD_QUERY_ADAPTER	 = 0x6,
+	MLX4_CMD_INIT_HCA	 = 0x7,
+	MLX4_CMD_CLOSE_HCA	 = 0x8,
+	MLX4_CMD_INIT_PORT	 = 0x9,
+	MLX4_CMD_CLOSE_PORT	 = 0xa,
+	MLX4_CMD_QUERY_HCA	 = 0xb,
+	MLX4_CMD_QUERY_PORT	 = 0x43,
+	MLX4_CMD_SENSE_PORT	 = 0x4d,
+	MLX4_CMD_HW_HEALTH_CHECK = 0x50,
+	MLX4_CMD_SET_PORT	 = 0xc,
+	MLX4_CMD_SET_NODE	 = 0x5a,
+	MLX4_CMD_QUERY_FUNC	 = 0x56,
+	MLX4_CMD_ACCESS_DDR	 = 0x2e,
+	MLX4_CMD_MAP_ICM	 = 0xffa,
+	MLX4_CMD_UNMAP_ICM	 = 0xff9,
+	MLX4_CMD_MAP_ICM_AUX	 = 0xffc,
+	MLX4_CMD_UNMAP_ICM_AUX	 = 0xffb,
+	MLX4_CMD_SET_ICM_SIZE	 = 0xffd,
+	/*master notify fw on finish for slave's flr*/
+	MLX4_CMD_INFORM_FLR_DONE = 0x5b,
+
+	/* TPT commands */
+	MLX4_CMD_SW2HW_MPT	 = 0xd,
+	MLX4_CMD_QUERY_MPT	 = 0xe,
+	MLX4_CMD_HW2SW_MPT	 = 0xf,
+	MLX4_CMD_READ_MTT	 = 0x10,
+	MLX4_CMD_WRITE_MTT	 = 0x11,
+	MLX4_CMD_SYNC_TPT	 = 0x2f,
+
+	/* EQ commands */
+	MLX4_CMD_MAP_EQ		 = 0x12,
+	MLX4_CMD_SW2HW_EQ	 = 0x13,
+	MLX4_CMD_HW2SW_EQ	 = 0x14,
+	MLX4_CMD_QUERY_EQ	 = 0x15,
+
+	/* CQ commands */
+	MLX4_CMD_SW2HW_CQ	 = 0x16,
+	MLX4_CMD_HW2SW_CQ	 = 0x17,
+	MLX4_CMD_QUERY_CQ	 = 0x18,
+	MLX4_CMD_MODIFY_CQ	 = 0x2c,
+
+	/* SRQ commands */
+	MLX4_CMD_SW2HW_SRQ	 = 0x35,
+	MLX4_CMD_HW2SW_SRQ	 = 0x36,
+	MLX4_CMD_QUERY_SRQ	 = 0x37,
+	MLX4_CMD_ARM_SRQ	 = 0x40,
+
+	/* QP/EE commands */
+	MLX4_CMD_RST2INIT_QP	 = 0x19,
+	MLX4_CMD_INIT2RTR_QP	 = 0x1a,
+	MLX4_CMD_RTR2RTS_QP	 = 0x1b,
+	MLX4_CMD_RTS2RTS_QP	 = 0x1c,
+	MLX4_CMD_SQERR2RTS_QP	 = 0x1d,
+	MLX4_CMD_2ERR_QP	 = 0x1e,
+	MLX4_CMD_RTS2SQD_QP	 = 0x1f,
+	MLX4_CMD_SQD2SQD_QP	 = 0x38,
+	MLX4_CMD_SQD2RTS_QP	 = 0x20,
+	MLX4_CMD_2RST_QP	 = 0x21,
+	MLX4_CMD_QUERY_QP	 = 0x22,
+	MLX4_CMD_INIT2INIT_QP	 = 0x2d,
+	MLX4_CMD_SUSPEND_QP	 = 0x32,
+	MLX4_CMD_UNSUSPEND_QP	 = 0x33,
+	/* special QP and management commands */
+	MLX4_CMD_CONF_SPECIAL_QP = 0x23,
+	MLX4_CMD_MAD_IFC	 = 0x24,
+
+	/* multicast commands */
+	MLX4_CMD_READ_MCG	 = 0x25,
+	MLX4_CMD_WRITE_MCG	 = 0x26,
+	MLX4_CMD_MGID_HASH	 = 0x27,
+
+	/* miscellaneous commands */
+	MLX4_CMD_DIAG_RPRT	 = 0x30,
+	MLX4_CMD_NOP		 = 0x31,
+	MLX4_CMD_ACCESS_MEM	 = 0x2e,
+	MLX4_CMD_SET_VEP	 = 0x52,
+
+	/* Ethernet specific commands */
+	MLX4_CMD_SET_VLAN_FLTR	 = 0x47,
+	MLX4_CMD_SET_MCAST_FLTR	 = 0x48,
+	MLX4_CMD_DUMP_ETH_STATS	 = 0x49,
+
+	/* Communication channel commands */
+	MLX4_CMD_ARM_COMM_CHANNEL = 0x57,
+	MLX4_CMD_GEN_EQE	 = 0x58,
+
+	/* virtual commands */
+	MLX4_CMD_ALLOC_RES	 = 0xf00,
+	MLX4_CMD_FREE_RES	 = 0xf01,
+	MLX4_CMD_MCAST_ATTACH	 = 0xf05,
+	MLX4_CMD_UCAST_ATTACH	 = 0xf06,
+	MLX4_CMD_PROMISC         = 0xf08,
+	MLX4_CMD_QUERY_FUNC_CAP  = 0xf0a,
+	MLX4_CMD_QP_ATTACH	 = 0xf0b,
+
+	/* debug commands */
+	MLX4_CMD_QUERY_DEBUG_MSG = 0x2a,
+	MLX4_CMD_SET_DEBUG_MSG	 = 0x2b,
+
+	/* statistics commands */
+	MLX4_CMD_QUERY_IF_STAT	 = 0X54,
+	MLX4_CMD_SET_IF_STAT	 = 0X55,
+};
+
+enum {
+	MLX4_CMD_TIME_CLASS_A	= 10000,
+	MLX4_CMD_TIME_CLASS_B	= 10000,
+	MLX4_CMD_TIME_CLASS_C	= 10000,
+};
+
+enum {
+	MLX4_MAILBOX_SIZE	= 4096,
+	MLX4_ACCESS_MEM_ALIGN	= 256,
+};
+
+enum {
+	/* set port opcode modifiers */
+	MLX4_SET_PORT_GENERAL   = 0x0,
+	MLX4_SET_PORT_RQP_CALC  = 0x1,
+	MLX4_SET_PORT_MAC_TABLE = 0x2,
+	MLX4_SET_PORT_VLAN_TABLE = 0x3,
+	MLX4_SET_PORT_PRIO_MAP  = 0x4,
+	MLX4_SET_PORT_GID_TABLE = 0x5,
+};
+
+enum {
+	MLX4_CMD_WRAPPED,
+	MLX4_CMD_NATIVE
+};
+
+struct mlx4_dev;
+
+struct mlx4_cmd_mailbox {
+	void		       *buf;
+	dma_addr_t		dma;
+};
+
+int __mlx4_cmd(struct mlx4_dev *dev, u64 in_param, u64 *out_param,
+	       int out_is_imm, u32 in_modifier, u8 op_modifier,
+	       u16 op, unsigned long timeout, int native);
+
+/* Invoke a command with no output parameter */
+static inline int mlx4_cmd(struct mlx4_dev *dev, u64 in_param, u32 in_modifier,
+			   u8 op_modifier, u16 op, unsigned long timeout,
+			   int native)
+{
+	return __mlx4_cmd(dev, in_param, NULL, 0, in_modifier,
+			  op_modifier, op, timeout, native);
+}
+
+/* Invoke a command with an output mailbox */
+static inline int mlx4_cmd_box(struct mlx4_dev *dev, u64 in_param, u64 out_param,
+			       u32 in_modifier, u8 op_modifier, u16 op,
+			       unsigned long timeout, int native)
+{
+	return __mlx4_cmd(dev, in_param, &out_param, 0, in_modifier,
+			  op_modifier, op, timeout, native);
+}
+
+/*
+ * Invoke a command with an immediate output parameter (and copy the
+ * output into the caller's out_param pointer after the command
+ * executes).
+ */
+static inline int mlx4_cmd_imm(struct mlx4_dev *dev, u64 in_param, u64 *out_param,
+			       u32 in_modifier, u8 op_modifier, u16 op,
+			       unsigned long timeout, int native)
+{
+	return __mlx4_cmd(dev, in_param, out_param, 1, in_modifier,
+			  op_modifier, op, timeout, native);
+}
+
+struct mlx4_cmd_mailbox *mlx4_alloc_cmd_mailbox(struct mlx4_dev *dev);
+void mlx4_free_cmd_mailbox(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *mailbox);
+
+u32 mlx4_comm_get_version(void);
+
+#define MLX4_COMM_GET_IF_REV(cmd_chan_ver) (u8)((cmd_chan_ver) >> 8)
+
+#endif /* MLX4_CMD_H */
diff --git a/include/linux/mlx4/cq.h b/include/linux/mlx4/cq.h
new file mode 100644
index 00000000..6f65b2c8
--- /dev/null
+++ b/include/linux/mlx4/cq.h
@@ -0,0 +1,150 @@
+/*
+ * Copyright (c) 2007 Cisco Systems, Inc.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *	- Redistributions of source code must retain the above
+ *	  copyright notice, this list of conditions and the following
+ *	  disclaimer.
+ *
+ *	- Redistributions in binary form must reproduce the above
+ *	  copyright notice, this list of conditions and the following
+ *	  disclaimer in the documentation and/or other materials
+ *	  provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef MLX4_CQ_H
+#define MLX4_CQ_H
+
+#include <linux/types.h>
+
+#include <linux/mlx4/device.h>
+#include <linux/mlx4/doorbell.h>
+
+struct mlx4_cqe {
+	__be32			vlan_my_qpn;
+	__be32			immed_rss_invalid;
+	__be32			g_mlpath_rqpn;
+	__be16			sl_vid;
+	__be16			rlid;
+	__be16			status;
+	u8			ipv6_ext_mask;
+	u8			badfcs_enc;
+	__be32			byte_cnt;
+	__be16			wqe_index;
+	__be16			checksum;
+	u8			reserved[3];
+	u8			owner_sr_opcode;
+};
+
+struct mlx4_err_cqe {
+	__be32			my_qpn;
+	u32			reserved1[5];
+	__be16			wqe_index;
+	u8			vendor_err_syndrome;
+	u8			syndrome;
+	u8			reserved2[3];
+	u8			owner_sr_opcode;
+};
+
+enum {
+	MLX4_CQE_VLAN_PRESENT_MASK	= 1 << 29,
+	MLX4_CQE_QPN_MASK		= 0xffffff,
+};
+
+enum {
+	MLX4_CQE_OWNER_MASK	= 0x80,
+	MLX4_CQE_IS_SEND_MASK	= 0x40,
+	MLX4_CQE_OPCODE_MASK	= 0x1f
+};
+
+enum {
+	MLX4_CQE_SYNDROME_LOCAL_LENGTH_ERR		= 0x01,
+	MLX4_CQE_SYNDROME_LOCAL_QP_OP_ERR		= 0x02,
+	MLX4_CQE_SYNDROME_LOCAL_PROT_ERR		= 0x04,
+	MLX4_CQE_SYNDROME_WR_FLUSH_ERR			= 0x05,
+	MLX4_CQE_SYNDROME_MW_BIND_ERR			= 0x06,
+	MLX4_CQE_SYNDROME_BAD_RESP_ERR			= 0x10,
+	MLX4_CQE_SYNDROME_LOCAL_ACCESS_ERR		= 0x11,
+	MLX4_CQE_SYNDROME_REMOTE_INVAL_REQ_ERR		= 0x12,
+	MLX4_CQE_SYNDROME_REMOTE_ACCESS_ERR		= 0x13,
+	MLX4_CQE_SYNDROME_REMOTE_OP_ERR			= 0x14,
+	MLX4_CQE_SYNDROME_TRANSPORT_RETRY_EXC_ERR	= 0x15,
+	MLX4_CQE_SYNDROME_RNR_RETRY_EXC_ERR		= 0x16,
+	MLX4_CQE_SYNDROME_REMOTE_ABORTED_ERR		= 0x22,
+};
+
+enum {
+	MLX4_CQE_STATUS_IPV4		= 1 << 6,
+	MLX4_CQE_STATUS_IPV4F		= 1 << 7,
+	MLX4_CQE_STATUS_IPV6		= 1 << 8,
+	MLX4_CQE_STATUS_IPV4OPT		= 1 << 9,
+	MLX4_CQE_STATUS_TCP		= 1 << 10,
+	MLX4_CQE_STATUS_UDP		= 1 << 11,
+	MLX4_CQE_STATUS_IPOK		= 1 << 12,
+};
+
+enum {
+	MLX4_CQE_LLC                     = 1,
+	MLX4_CQE_SNAP                    = 1 << 1,
+	MLX4_CQE_BAD_FCS                 = 1 << 4,
+};
+
+static inline void mlx4_cq_arm(struct mlx4_cq *cq, u32 cmd,
+			       void __iomem *uar_page,
+			       spinlock_t *doorbell_lock)
+{
+	__be32 doorbell[2];
+	u32 sn;
+	u32 ci;
+
+	sn = cq->arm_sn & 3;
+	ci = cq->cons_index & 0xffffff;
+
+	*cq->arm_db = cpu_to_be32(sn << 28 | cmd | ci);
+
+	/*
+	 * Make sure that the doorbell record in host memory is
+	 * written before ringing the doorbell via PCI MMIO.
+	 */
+	wmb();
+
+	doorbell[0] = cpu_to_be32(sn << 28 | cmd | cq->cqn);
+	doorbell[1] = cpu_to_be32(ci);
+
+	mlx4_write64(doorbell, uar_page + MLX4_CQ_DOORBELL, doorbell_lock);
+}
+
+static inline void mlx4_cq_set_ci(struct mlx4_cq *cq)
+{
+	*cq->set_ci_db = cpu_to_be32(cq->cons_index & 0xffffff);
+}
+
+enum {
+	MLX4_CQ_DB_REQ_NOT_SOL		= 1 << 24,
+	MLX4_CQ_DB_REQ_NOT		= 2 << 24
+};
+
+int mlx4_cq_modify(struct mlx4_dev *dev, struct mlx4_cq *cq,
+		   u16 count, u16 period);
+int mlx4_cq_resize(struct mlx4_dev *dev, struct mlx4_cq *cq,
+		   int entries, struct mlx4_mtt *mtt);
+
+#endif /* MLX4_CQ_H */
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
new file mode 100644
index 00000000..834c96c5
--- /dev/null
+++ b/include/linux/mlx4/device.h
@@ -0,0 +1,654 @@
+/*
+ * Copyright (c) 2006, 2007 Cisco Systems, Inc.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *	- Redistributions of source code must retain the above
+ *	  copyright notice, this list of conditions and the following
+ *	  disclaimer.
+ *
+ *	- Redistributions in binary form must reproduce the above
+ *	  copyright notice, this list of conditions and the following
+ *	  disclaimer in the documentation and/or other materials
+ *	  provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef MLX4_DEVICE_H
+#define MLX4_DEVICE_H
+
+#include <linux/pci.h>
+#include <linux/completion.h>
+#include <linux/radix-tree.h>
+
+#include <linux/atomic.h>
+
+#define MAX_MSIX_P_PORT		17
+#define MAX_MSIX		64
+#define MSIX_LEGACY_SZ		4
+#define MIN_MSIX_P_PORT		5
+
+enum {
+	MLX4_FLAG_MSI_X		= 1 << 0,
+	MLX4_FLAG_OLD_PORT_CMDS	= 1 << 1,
+	MLX4_FLAG_MASTER	= 1 << 2,
+	MLX4_FLAG_SLAVE		= 1 << 3,
+	MLX4_FLAG_SRIOV		= 1 << 4,
+};
+
+enum {
+	MLX4_MAX_PORTS		= 2
+};
+
+enum {
+	MLX4_BOARD_ID_LEN = 64
+};
+
+enum {
+	MLX4_MAX_NUM_PF		= 16,
+	MLX4_MAX_NUM_VF		= 64,
+	MLX4_MFUNC_MAX		= 80,
+	MLX4_MFUNC_EQ_NUM	= 4,
+	MLX4_MFUNC_MAX_EQES     = 8,
+	MLX4_MFUNC_EQE_MASK     = (MLX4_MFUNC_MAX_EQES - 1)
+};
+
+enum {
+	MLX4_DEV_CAP_FLAG_RC		= 1LL <<  0,
+	MLX4_DEV_CAP_FLAG_UC		= 1LL <<  1,
+	MLX4_DEV_CAP_FLAG_UD		= 1LL <<  2,
+	MLX4_DEV_CAP_FLAG_XRC		= 1LL <<  3,
+	MLX4_DEV_CAP_FLAG_SRQ		= 1LL <<  6,
+	MLX4_DEV_CAP_FLAG_IPOIB_CSUM	= 1LL <<  7,
+	MLX4_DEV_CAP_FLAG_BAD_PKEY_CNTR	= 1LL <<  8,
+	MLX4_DEV_CAP_FLAG_BAD_QKEY_CNTR	= 1LL <<  9,
+	MLX4_DEV_CAP_FLAG_DPDP		= 1LL << 12,
+	MLX4_DEV_CAP_FLAG_BLH		= 1LL << 15,
+	MLX4_DEV_CAP_FLAG_MEM_WINDOW	= 1LL << 16,
+	MLX4_DEV_CAP_FLAG_APM		= 1LL << 17,
+	MLX4_DEV_CAP_FLAG_ATOMIC	= 1LL << 18,
+	MLX4_DEV_CAP_FLAG_RAW_MCAST	= 1LL << 19,
+	MLX4_DEV_CAP_FLAG_UD_AV_PORT	= 1LL << 20,
+	MLX4_DEV_CAP_FLAG_UD_MCAST	= 1LL << 21,
+	MLX4_DEV_CAP_FLAG_IBOE		= 1LL << 30,
+	MLX4_DEV_CAP_FLAG_UC_LOOPBACK	= 1LL << 32,
+	MLX4_DEV_CAP_FLAG_FCS_KEEP	= 1LL << 34,
+	MLX4_DEV_CAP_FLAG_WOL_PORT1	= 1LL << 37,
+	MLX4_DEV_CAP_FLAG_WOL_PORT2	= 1LL << 38,
+	MLX4_DEV_CAP_FLAG_UDP_RSS	= 1LL << 40,
+	MLX4_DEV_CAP_FLAG_VEP_UC_STEER	= 1LL << 41,
+	MLX4_DEV_CAP_FLAG_VEP_MC_STEER	= 1LL << 42,
+	MLX4_DEV_CAP_FLAG_COUNTERS	= 1LL << 48,
+	MLX4_DEV_CAP_FLAG_SENSE_SUPPORT	= 1LL << 55
+};
+
+#define MLX4_ATTR_EXTENDED_PORT_INFO	cpu_to_be16(0xff90)
+
+enum {
+	MLX4_BMME_FLAG_LOCAL_INV	= 1 <<  6,
+	MLX4_BMME_FLAG_REMOTE_INV	= 1 <<  7,
+	MLX4_BMME_FLAG_TYPE_2_WIN	= 1 <<  9,
+	MLX4_BMME_FLAG_RESERVED_LKEY	= 1 << 10,
+	MLX4_BMME_FLAG_FAST_REG_WR	= 1 << 11,
+};
+
+enum mlx4_event {
+	MLX4_EVENT_TYPE_COMP		   = 0x00,
+	MLX4_EVENT_TYPE_PATH_MIG	   = 0x01,
+	MLX4_EVENT_TYPE_COMM_EST	   = 0x02,
+	MLX4_EVENT_TYPE_SQ_DRAINED	   = 0x03,
+	MLX4_EVENT_TYPE_SRQ_QP_LAST_WQE	   = 0x13,
+	MLX4_EVENT_TYPE_SRQ_LIMIT	   = 0x14,
+	MLX4_EVENT_TYPE_CQ_ERROR	   = 0x04,
+	MLX4_EVENT_TYPE_WQ_CATAS_ERROR	   = 0x05,
+	MLX4_EVENT_TYPE_EEC_CATAS_ERROR	   = 0x06,
+	MLX4_EVENT_TYPE_PATH_MIG_FAILED	   = 0x07,
+	MLX4_EVENT_TYPE_WQ_INVAL_REQ_ERROR = 0x10,
+	MLX4_EVENT_TYPE_WQ_ACCESS_ERROR	   = 0x11,
+	MLX4_EVENT_TYPE_SRQ_CATAS_ERROR	   = 0x12,
+	MLX4_EVENT_TYPE_LOCAL_CATAS_ERROR  = 0x08,
+	MLX4_EVENT_TYPE_PORT_CHANGE	   = 0x09,
+	MLX4_EVENT_TYPE_EQ_OVERFLOW	   = 0x0f,
+	MLX4_EVENT_TYPE_ECC_DETECT	   = 0x0e,
+	MLX4_EVENT_TYPE_CMD		   = 0x0a,
+	MLX4_EVENT_TYPE_VEP_UPDATE	   = 0x19,
+	MLX4_EVENT_TYPE_COMM_CHANNEL	   = 0x18,
+	MLX4_EVENT_TYPE_FATAL_WARNING	   = 0x1b,
+	MLX4_EVENT_TYPE_FLR_EVENT	   = 0x1c,
+	MLX4_EVENT_TYPE_NONE		   = 0xff,
+};
+
+enum {
+	MLX4_PORT_CHANGE_SUBTYPE_DOWN	= 1,
+	MLX4_PORT_CHANGE_SUBTYPE_ACTIVE	= 4
+};
+
+enum {
+	MLX4_FATAL_WARNING_SUBTYPE_WARMING = 0,
+};
+
+enum {
+	MLX4_PERM_LOCAL_READ	= 1 << 10,
+	MLX4_PERM_LOCAL_WRITE	= 1 << 11,
+	MLX4_PERM_REMOTE_READ	= 1 << 12,
+	MLX4_PERM_REMOTE_WRITE	= 1 << 13,
+	MLX4_PERM_ATOMIC	= 1 << 14
+};
+
+enum {
+	MLX4_OPCODE_NOP			= 0x00,
+	MLX4_OPCODE_SEND_INVAL		= 0x01,
+	MLX4_OPCODE_RDMA_WRITE		= 0x08,
+	MLX4_OPCODE_RDMA_WRITE_IMM	= 0x09,
+	MLX4_OPCODE_SEND		= 0x0a,
+	MLX4_OPCODE_SEND_IMM		= 0x0b,
+	MLX4_OPCODE_LSO			= 0x0e,
+	MLX4_OPCODE_RDMA_READ		= 0x10,
+	MLX4_OPCODE_ATOMIC_CS		= 0x11,
+	MLX4_OPCODE_ATOMIC_FA		= 0x12,
+	MLX4_OPCODE_MASKED_ATOMIC_CS	= 0x14,
+	MLX4_OPCODE_MASKED_ATOMIC_FA	= 0x15,
+	MLX4_OPCODE_BIND_MW		= 0x18,
+	MLX4_OPCODE_FMR			= 0x19,
+	MLX4_OPCODE_LOCAL_INVAL		= 0x1b,
+	MLX4_OPCODE_CONFIG_CMD		= 0x1f,
+
+	MLX4_RECV_OPCODE_RDMA_WRITE_IMM	= 0x00,
+	MLX4_RECV_OPCODE_SEND		= 0x01,
+	MLX4_RECV_OPCODE_SEND_IMM	= 0x02,
+	MLX4_RECV_OPCODE_SEND_INVAL	= 0x03,
+
+	MLX4_CQE_OPCODE_ERROR		= 0x1e,
+	MLX4_CQE_OPCODE_RESIZE		= 0x16,
+};
+
+enum {
+	MLX4_STAT_RATE_OFFSET	= 5
+};
+
+enum mlx4_protocol {
+	MLX4_PROT_IB_IPV6 = 0,
+	MLX4_PROT_ETH,
+	MLX4_PROT_IB_IPV4,
+	MLX4_PROT_FCOE
+};
+
+enum {
+	MLX4_MTT_FLAG_PRESENT		= 1
+};
+
+enum mlx4_qp_region {
+	MLX4_QP_REGION_FW = 0,
+	MLX4_QP_REGION_ETH_ADDR,
+	MLX4_QP_REGION_FC_ADDR,
+	MLX4_QP_REGION_FC_EXCH,
+	MLX4_NUM_QP_REGION
+};
+
+enum mlx4_port_type {
+	MLX4_PORT_TYPE_NONE	= 0,
+	MLX4_PORT_TYPE_IB	= 1,
+	MLX4_PORT_TYPE_ETH	= 2,
+	MLX4_PORT_TYPE_AUTO	= 3
+};
+
+enum mlx4_special_vlan_idx {
+	MLX4_NO_VLAN_IDX        = 0,
+	MLX4_VLAN_MISS_IDX,
+	MLX4_VLAN_REGULAR
+};
+
+enum mlx4_steer_type {
+	MLX4_MC_STEER = 0,
+	MLX4_UC_STEER,
+	MLX4_NUM_STEERS
+};
+
+enum {
+	MLX4_NUM_FEXCH          = 64 * 1024,
+};
+
+enum {
+	MLX4_MAX_FAST_REG_PAGES = 511,
+};
+
+static inline u64 mlx4_fw_ver(u64 major, u64 minor, u64 subminor)
+{
+	return (major << 32) | (minor << 16) | subminor;
+}
+
+struct mlx4_caps {
+	u64			fw_ver;
+	u32			function;
+	int			num_ports;
+	int			vl_cap[MLX4_MAX_PORTS + 1];
+	int			ib_mtu_cap[MLX4_MAX_PORTS + 1];
+	__be32			ib_port_def_cap[MLX4_MAX_PORTS + 1];
+	u64			def_mac[MLX4_MAX_PORTS + 1];
+	int			eth_mtu_cap[MLX4_MAX_PORTS + 1];
+	int			gid_table_len[MLX4_MAX_PORTS + 1];
+	int			pkey_table_len[MLX4_MAX_PORTS + 1];
+	int			trans_type[MLX4_MAX_PORTS + 1];
+	int			vendor_oui[MLX4_MAX_PORTS + 1];
+	int			wavelength[MLX4_MAX_PORTS + 1];
+	u64			trans_code[MLX4_MAX_PORTS + 1];
+	int			local_ca_ack_delay;
+	int			num_uars;
+	u32			uar_page_size;
+	int			bf_reg_size;
+	int			bf_regs_per_page;
+	int			max_sq_sg;
+	int			max_rq_sg;
+	int			num_qps;
+	int			max_wqes;
+	int			max_sq_desc_sz;
+	int			max_rq_desc_sz;
+	int			max_qp_init_rdma;
+	int			max_qp_dest_rdma;
+	int			sqp_start;
+	int			num_srqs;
+	int			max_srq_wqes;
+	int			max_srq_sge;
+	int			reserved_srqs;
+	int			num_cqs;
+	int			max_cqes;
+	int			reserved_cqs;
+	int			num_eqs;
+	int			reserved_eqs;
+	int			num_comp_vectors;
+	int			comp_pool;
+	int			num_mpts;
+	int			max_fmr_maps;
+	int			num_mtts;
+	int			fmr_reserved_mtts;
+	int			reserved_mtts;
+	int			reserved_mrws;
+	int			reserved_uars;
+	int			num_mgms;
+	int			num_amgms;
+	int			reserved_mcgs;
+	int			num_qp_per_mgm;
+	int			num_pds;
+	int			reserved_pds;
+	int			max_xrcds;
+	int			reserved_xrcds;
+	int			mtt_entry_sz;
+	u32			max_msg_sz;
+	u32			page_size_cap;
+	u64			flags;
+	u32			bmme_flags;
+	u32			reserved_lkey;
+	u16			stat_rate_support;
+	u8			port_width_cap[MLX4_MAX_PORTS + 1];
+	int			max_gso_sz;
+	int                     reserved_qps_cnt[MLX4_NUM_QP_REGION];
+	int			reserved_qps;
+	int                     reserved_qps_base[MLX4_NUM_QP_REGION];
+	int                     log_num_macs;
+	int                     log_num_vlans;
+	int                     log_num_prios;
+	enum mlx4_port_type	port_type[MLX4_MAX_PORTS + 1];
+	u8			supported_type[MLX4_MAX_PORTS + 1];
+	u8                      suggested_type[MLX4_MAX_PORTS + 1];
+	u8                      default_sense[MLX4_MAX_PORTS + 1];
+	u32			port_mask[MLX4_MAX_PORTS + 1];
+	enum mlx4_port_type	possible_type[MLX4_MAX_PORTS + 1];
+	u32			max_counters;
+	u8			port_ib_mtu[MLX4_MAX_PORTS + 1];
+};
+
+struct mlx4_buf_list {
+	void		       *buf;
+	dma_addr_t		map;
+};
+
+struct mlx4_buf {
+	struct mlx4_buf_list	direct;
+	struct mlx4_buf_list   *page_list;
+	int			nbufs;
+	int			npages;
+	int			page_shift;
+};
+
+struct mlx4_mtt {
+	u32			offset;
+	int			order;
+	int			page_shift;
+};
+
+enum {
+	MLX4_DB_PER_PAGE = PAGE_SIZE / 4
+};
+
+struct mlx4_db_pgdir {
+	struct list_head	list;
+	DECLARE_BITMAP(order0, MLX4_DB_PER_PAGE);
+	DECLARE_BITMAP(order1, MLX4_DB_PER_PAGE / 2);
+	unsigned long	       *bits[2];
+	__be32		       *db_page;
+	dma_addr_t		db_dma;
+};
+
+struct mlx4_ib_user_db_page;
+
+struct mlx4_db {
+	__be32			*db;
+	union {
+		struct mlx4_db_pgdir		*pgdir;
+		struct mlx4_ib_user_db_page	*user_page;
+	}			u;
+	dma_addr_t		dma;
+	int			index;
+	int			order;
+};
+
+struct mlx4_hwq_resources {
+	struct mlx4_db		db;
+	struct mlx4_mtt		mtt;
+	struct mlx4_buf		buf;
+};
+
+struct mlx4_mr {
+	struct mlx4_mtt		mtt;
+	u64			iova;
+	u64			size;
+	u32			key;
+	u32			pd;
+	u32			access;
+	int			enabled;
+};
+
+struct mlx4_fmr {
+	struct mlx4_mr		mr;
+	struct mlx4_mpt_entry  *mpt;
+	__be64		       *mtts;
+	dma_addr_t		dma_handle;
+	int			max_pages;
+	int			max_maps;
+	int			maps;
+	u8			page_shift;
+};
+
+struct mlx4_uar {
+	unsigned long		pfn;
+	int			index;
+	struct list_head	bf_list;
+	unsigned		free_bf_bmap;
+	void __iomem	       *map;
+	void __iomem	       *bf_map;
+};
+
+struct mlx4_bf {
+	unsigned long		offset;
+	int			buf_size;
+	struct mlx4_uar	       *uar;
+	void __iomem	       *reg;
+};
+
+struct mlx4_cq {
+	void (*comp)		(struct mlx4_cq *);
+	void (*event)		(struct mlx4_cq *, enum mlx4_event);
+
+	struct mlx4_uar	       *uar;
+
+	u32			cons_index;
+
+	__be32		       *set_ci_db;
+	__be32		       *arm_db;
+	int			arm_sn;
+
+	int			cqn;
+	unsigned		vector;
+
+	atomic_t		refcount;
+	struct completion	free;
+};
+
+struct mlx4_qp {
+	void (*event)		(struct mlx4_qp *, enum mlx4_event);
+
+	int			qpn;
+
+	atomic_t		refcount;
+	struct completion	free;
+};
+
+struct mlx4_srq {
+	void (*event)		(struct mlx4_srq *, enum mlx4_event);
+
+	int			srqn;
+	int			max;
+	int			max_gs;
+	int			wqe_shift;
+
+	atomic_t		refcount;
+	struct completion	free;
+};
+
+struct mlx4_av {
+	__be32			port_pd;
+	u8			reserved1;
+	u8			g_slid;
+	__be16			dlid;
+	u8			reserved2;
+	u8			gid_index;
+	u8			stat_rate;
+	u8			hop_limit;
+	__be32			sl_tclass_flowlabel;
+	u8			dgid[16];
+};
+
+struct mlx4_eth_av {
+	__be32		port_pd;
+	u8		reserved1;
+	u8		smac_idx;
+	u16		reserved2;
+	u8		reserved3;
+	u8		gid_index;
+	u8		stat_rate;
+	u8		hop_limit;
+	__be32		sl_tclass_flowlabel;
+	u8		dgid[16];
+	u32		reserved4[2];
+	__be16		vlan;
+	u8		mac[6];
+};
+
+union mlx4_ext_av {
+	struct mlx4_av		ib;
+	struct mlx4_eth_av	eth;
+};
+
+struct mlx4_counter {
+	u8	reserved1[3];
+	u8	counter_mode;
+	__be32	num_ifc;
+	u32	reserved2[2];
+	__be64	rx_frames;
+	__be64	rx_bytes;
+	__be64	tx_frames;
+	__be64	tx_bytes;
+};
+
+struct mlx4_dev {
+	struct pci_dev	       *pdev;
+	unsigned long		flags;
+	unsigned long		num_slaves;
+	struct mlx4_caps	caps;
+	struct radix_tree_root	qp_table_tree;
+	u8			rev_id;
+	char			board_id[MLX4_BOARD_ID_LEN];
+	int			num_vfs;
+};
+
+struct mlx4_init_port_param {
+	int			set_guid0;
+	int			set_node_guid;
+	int			set_si_guid;
+	u16			mtu;
+	int			port_width_cap;
+	u16			vl_cap;
+	u16			max_gid;
+	u16			max_pkey;
+	u64			guid0;
+	u64			node_guid;
+	u64			si_guid;
+};
+
+#define mlx4_foreach_port(port, dev, type)				\
+	for ((port) = 1; (port) <= (dev)->caps.num_ports; (port)++)	\
+		if ((type) == (dev)->caps.port_mask[(port)])
+
+#define mlx4_foreach_ib_transport_port(port, dev)                         \
+	for ((port) = 1; (port) <= (dev)->caps.num_ports; (port)++)	  \
+		if (((dev)->caps.port_mask[port] == MLX4_PORT_TYPE_IB) || \
+			((dev)->caps.flags & MLX4_DEV_CAP_FLAG_IBOE))
+
+static inline int mlx4_is_master(struct mlx4_dev *dev)
+{
+	return dev->flags & MLX4_FLAG_MASTER;
+}
+
+static inline int mlx4_is_qp_reserved(struct mlx4_dev *dev, u32 qpn)
+{
+	return (qpn < dev->caps.sqp_start + 8);
+}
+
+static inline int mlx4_is_mfunc(struct mlx4_dev *dev)
+{
+	return dev->flags & (MLX4_FLAG_SLAVE | MLX4_FLAG_MASTER);
+}
+
+static inline int mlx4_is_slave(struct mlx4_dev *dev)
+{
+	return dev->flags & MLX4_FLAG_SLAVE;
+}
+
+int mlx4_buf_alloc(struct mlx4_dev *dev, int size, int max_direct,
+		   struct mlx4_buf *buf);
+void mlx4_buf_free(struct mlx4_dev *dev, int size, struct mlx4_buf *buf);
+static inline void *mlx4_buf_offset(struct mlx4_buf *buf, int offset)
+{
+	if (BITS_PER_LONG == 64 || buf->nbufs == 1)
+		return buf->direct.buf + offset;
+	else
+		return buf->page_list[offset >> PAGE_SHIFT].buf +
+			(offset & (PAGE_SIZE - 1));
+}
+
+int mlx4_pd_alloc(struct mlx4_dev *dev, u32 *pdn);
+void mlx4_pd_free(struct mlx4_dev *dev, u32 pdn);
+int mlx4_xrcd_alloc(struct mlx4_dev *dev, u32 *xrcdn);
+void mlx4_xrcd_free(struct mlx4_dev *dev, u32 xrcdn);
+
+int mlx4_uar_alloc(struct mlx4_dev *dev, struct mlx4_uar *uar);
+void mlx4_uar_free(struct mlx4_dev *dev, struct mlx4_uar *uar);
+int mlx4_bf_alloc(struct mlx4_dev *dev, struct mlx4_bf *bf);
+void mlx4_bf_free(struct mlx4_dev *dev, struct mlx4_bf *bf);
+
+int mlx4_mtt_init(struct mlx4_dev *dev, int npages, int page_shift,
+		  struct mlx4_mtt *mtt);
+void mlx4_mtt_cleanup(struct mlx4_dev *dev, struct mlx4_mtt *mtt);
+u64 mlx4_mtt_addr(struct mlx4_dev *dev, struct mlx4_mtt *mtt);
+
+int mlx4_mr_alloc(struct mlx4_dev *dev, u32 pd, u64 iova, u64 size, u32 access,
+		  int npages, int page_shift, struct mlx4_mr *mr);
+void mlx4_mr_free(struct mlx4_dev *dev, struct mlx4_mr *mr);
+int mlx4_mr_enable(struct mlx4_dev *dev, struct mlx4_mr *mr);
+int mlx4_write_mtt(struct mlx4_dev *dev, struct mlx4_mtt *mtt,
+		   int start_index, int npages, u64 *page_list);
+int mlx4_buf_write_mtt(struct mlx4_dev *dev, struct mlx4_mtt *mtt,
+		       struct mlx4_buf *buf);
+
+int mlx4_db_alloc(struct mlx4_dev *dev, struct mlx4_db *db, int order);
+void mlx4_db_free(struct mlx4_dev *dev, struct mlx4_db *db);
+
+int mlx4_alloc_hwq_res(struct mlx4_dev *dev, struct mlx4_hwq_resources *wqres,
+		       int size, int max_direct);
+void mlx4_free_hwq_res(struct mlx4_dev *mdev, struct mlx4_hwq_resources *wqres,
+		       int size);
+
+int mlx4_cq_alloc(struct mlx4_dev *dev, int nent, struct mlx4_mtt *mtt,
+		  struct mlx4_uar *uar, u64 db_rec, struct mlx4_cq *cq,
+		  unsigned vector, int collapsed);
+void mlx4_cq_free(struct mlx4_dev *dev, struct mlx4_cq *cq);
+
+int mlx4_qp_reserve_range(struct mlx4_dev *dev, int cnt, int align, int *base);
+void mlx4_qp_release_range(struct mlx4_dev *dev, int base_qpn, int cnt);
+
+int mlx4_qp_alloc(struct mlx4_dev *dev, int qpn, struct mlx4_qp *qp);
+void mlx4_qp_free(struct mlx4_dev *dev, struct mlx4_qp *qp);
+
+int mlx4_srq_alloc(struct mlx4_dev *dev, u32 pdn, u32 cqn, u16 xrcdn,
+		   struct mlx4_mtt *mtt, u64 db_rec, struct mlx4_srq *srq);
+void mlx4_srq_free(struct mlx4_dev *dev, struct mlx4_srq *srq);
+int mlx4_srq_arm(struct mlx4_dev *dev, struct mlx4_srq *srq, int limit_watermark);
+int mlx4_srq_query(struct mlx4_dev *dev, struct mlx4_srq *srq, int *limit_watermark);
+
+int mlx4_INIT_PORT(struct mlx4_dev *dev, int port);
+int mlx4_CLOSE_PORT(struct mlx4_dev *dev, int port);
+
+int mlx4_unicast_attach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16],
+			int block_mcast_loopback, enum mlx4_protocol prot);
+int mlx4_unicast_detach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16],
+			enum mlx4_protocol prot);
+int mlx4_multicast_attach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16],
+			  int block_mcast_loopback, enum mlx4_protocol protocol);
+int mlx4_multicast_detach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16],
+			  enum mlx4_protocol protocol);
+int mlx4_multicast_promisc_add(struct mlx4_dev *dev, u32 qpn, u8 port);
+int mlx4_multicast_promisc_remove(struct mlx4_dev *dev, u32 qpn, u8 port);
+int mlx4_unicast_promisc_add(struct mlx4_dev *dev, u32 qpn, u8 port);
+int mlx4_unicast_promisc_remove(struct mlx4_dev *dev, u32 qpn, u8 port);
+int mlx4_SET_MCAST_FLTR(struct mlx4_dev *dev, u8 port, u64 mac, u64 clear, u8 mode);
+
+int mlx4_register_mac(struct mlx4_dev *dev, u8 port, u64 mac);
+void mlx4_unregister_mac(struct mlx4_dev *dev, u8 port, u64 mac);
+int mlx4_replace_mac(struct mlx4_dev *dev, u8 port, int qpn, u64 new_mac);
+int mlx4_get_eth_qp(struct mlx4_dev *dev, u8 port, u64 mac, int *qpn);
+void mlx4_put_eth_qp(struct mlx4_dev *dev, u8 port, u64 mac, int qpn);
+void mlx4_set_stats_bitmap(struct mlx4_dev *dev, u64 *stats_bitmap);
+int mlx4_SET_PORT_general(struct mlx4_dev *dev, u8 port, int mtu,
+			  u8 pptx, u8 pfctx, u8 pprx, u8 pfcrx);
+int mlx4_SET_PORT_qpn_calc(struct mlx4_dev *dev, u8 port, u32 base_qpn,
+			   u8 promisc);
+int mlx4_find_cached_vlan(struct mlx4_dev *dev, u8 port, u16 vid, int *idx);
+int mlx4_register_vlan(struct mlx4_dev *dev, u8 port, u16 vlan, int *index);
+void mlx4_unregister_vlan(struct mlx4_dev *dev, u8 port, int index);
+
+int mlx4_map_phys_fmr(struct mlx4_dev *dev, struct mlx4_fmr *fmr, u64 *page_list,
+		      int npages, u64 iova, u32 *lkey, u32 *rkey);
+int mlx4_fmr_alloc(struct mlx4_dev *dev, u32 pd, u32 access, int max_pages,
+		   int max_maps, u8 page_shift, struct mlx4_fmr *fmr);
+int mlx4_fmr_enable(struct mlx4_dev *dev, struct mlx4_fmr *fmr);
+void mlx4_fmr_unmap(struct mlx4_dev *dev, struct mlx4_fmr *fmr,
+		    u32 *lkey, u32 *rkey);
+int mlx4_fmr_free(struct mlx4_dev *dev, struct mlx4_fmr *fmr);
+int mlx4_SYNC_TPT(struct mlx4_dev *dev);
+int mlx4_test_interrupts(struct mlx4_dev *dev);
+int mlx4_assign_eq(struct mlx4_dev *dev, char* name , int* vector);
+void mlx4_release_eq(struct mlx4_dev *dev, int vec);
+
+int mlx4_wol_read(struct mlx4_dev *dev, u64 *config, int port);
+int mlx4_wol_write(struct mlx4_dev *dev, u64 config, int port);
+
+int mlx4_counter_alloc(struct mlx4_dev *dev, u32 *idx);
+void mlx4_counter_free(struct mlx4_dev *dev, u32 idx);
+
+#endif /* MLX4_DEVICE_H */
diff --git a/include/linux/mlx4/doorbell.h b/include/linux/mlx4/doorbell.h
new file mode 100644
index 00000000..f31bba27
--- /dev/null
+++ b/include/linux/mlx4/doorbell.h
@@ -0,0 +1,86 @@
+/*
+ * Copyright (c) 2004 Topspin Communications.  All rights reserved.
+ * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
+ * Copyright (c) 2005 Mellanox Technologies. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef MLX4_DOORBELL_H
+#define MLX4_DOORBELL_H
+
+#include <linux/types.h>
+#include <linux/io.h>
+
+#define MLX4_SEND_DOORBELL    0x14
+#define MLX4_CQ_DOORBELL      0x20
+
+#if BITS_PER_LONG == 64
+/*
+ * Assume that we can just write a 64-bit doorbell atomically.  s390
+ * actually doesn't have writeq() but S/390 systems don't even have
+ * PCI so we won't worry about it.
+ */
+
+#define MLX4_DECLARE_DOORBELL_LOCK(name)
+#define MLX4_INIT_DOORBELL_LOCK(ptr)    do { } while (0)
+#define MLX4_GET_DOORBELL_LOCK(ptr)      (NULL)
+
+static inline void mlx4_write64(__be32 val[2], void __iomem *dest,
+				spinlock_t *doorbell_lock)
+{
+	__raw_writeq(*(u64 *) val, dest);
+}
+
+#else
+
+/*
+ * Just fall back to a spinlock to protect the doorbell if
+ * BITS_PER_LONG is 32 -- there's no portable way to do atomic 64-bit
+ * MMIO writes.
+ */
+
+#define MLX4_DECLARE_DOORBELL_LOCK(name) spinlock_t name;
+#define MLX4_INIT_DOORBELL_LOCK(ptr)     spin_lock_init(ptr)
+#define MLX4_GET_DOORBELL_LOCK(ptr)      (ptr)
+
+static inline void mlx4_write64(__be32 val[2], void __iomem *dest,
+				spinlock_t *doorbell_lock)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(doorbell_lock, flags);
+	__raw_writel((__force u32) val[0], dest);
+	__raw_writel((__force u32) val[1], dest + 4);
+	spin_unlock_irqrestore(doorbell_lock, flags);
+}
+
+#endif
+
+#endif /* MLX4_DOORBELL_H */
diff --git a/include/linux/mlx4/driver.h b/include/linux/mlx4/driver.h
new file mode 100644
index 00000000..5f1298b1
--- /dev/null
+++ b/include/linux/mlx4/driver.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright (c) 2006 Cisco Systems, Inc.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef MLX4_DRIVER_H
+#define MLX4_DRIVER_H
+
+#include <linux/mlx4/device.h>
+
+struct mlx4_dev;
+
+enum mlx4_dev_event {
+	MLX4_DEV_EVENT_CATASTROPHIC_ERROR,
+	MLX4_DEV_EVENT_PORT_UP,
+	MLX4_DEV_EVENT_PORT_DOWN,
+	MLX4_DEV_EVENT_PORT_REINIT,
+};
+
+struct mlx4_interface {
+	void *			(*add)	 (struct mlx4_dev *dev);
+	void			(*remove)(struct mlx4_dev *dev, void *context);
+	void			(*event) (struct mlx4_dev *dev, void *context,
+					  enum mlx4_dev_event event, int port);
+	void *			(*get_dev)(struct mlx4_dev *dev, void *context, u8 port);
+	struct list_head	list;
+	enum mlx4_protocol	protocol;
+};
+
+int mlx4_register_interface(struct mlx4_interface *intf);
+void mlx4_unregister_interface(struct mlx4_interface *intf);
+
+void *mlx4_get_protocol_dev(struct mlx4_dev *dev, enum mlx4_protocol proto, int port);
+
+#endif /* MLX4_DRIVER_H */
diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h
new file mode 100644
index 00000000..091f9e7d
--- /dev/null
+++ b/include/linux/mlx4/qp.h
@@ -0,0 +1,364 @@
+/*
+ * Copyright (c) 2007 Cisco Systems, Inc.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *	- Redistributions of source code must retain the above
+ *	  copyright notice, this list of conditions and the following
+ *	  disclaimer.
+ *
+ *	- Redistributions in binary form must reproduce the above
+ *	  copyright notice, this list of conditions and the following
+ *	  disclaimer in the documentation and/or other materials
+ *	  provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef MLX4_QP_H
+#define MLX4_QP_H
+
+#include <linux/types.h>
+
+#include <linux/mlx4/device.h>
+
+#define MLX4_INVALID_LKEY	0x100
+
+enum mlx4_qp_optpar {
+	MLX4_QP_OPTPAR_ALT_ADDR_PATH		= 1 << 0,
+	MLX4_QP_OPTPAR_RRE			= 1 << 1,
+	MLX4_QP_OPTPAR_RAE			= 1 << 2,
+	MLX4_QP_OPTPAR_RWE			= 1 << 3,
+	MLX4_QP_OPTPAR_PKEY_INDEX		= 1 << 4,
+	MLX4_QP_OPTPAR_Q_KEY			= 1 << 5,
+	MLX4_QP_OPTPAR_RNR_TIMEOUT		= 1 << 6,
+	MLX4_QP_OPTPAR_PRIMARY_ADDR_PATH	= 1 << 7,
+	MLX4_QP_OPTPAR_SRA_MAX			= 1 << 8,
+	MLX4_QP_OPTPAR_RRA_MAX			= 1 << 9,
+	MLX4_QP_OPTPAR_PM_STATE			= 1 << 10,
+	MLX4_QP_OPTPAR_RETRY_COUNT		= 1 << 12,
+	MLX4_QP_OPTPAR_RNR_RETRY		= 1 << 13,
+	MLX4_QP_OPTPAR_ACK_TIMEOUT		= 1 << 14,
+	MLX4_QP_OPTPAR_SCHED_QUEUE		= 1 << 16,
+	MLX4_QP_OPTPAR_COUNTER_INDEX		= 1 << 20
+};
+
+enum mlx4_qp_state {
+	MLX4_QP_STATE_RST			= 0,
+	MLX4_QP_STATE_INIT			= 1,
+	MLX4_QP_STATE_RTR			= 2,
+	MLX4_QP_STATE_RTS			= 3,
+	MLX4_QP_STATE_SQER			= 4,
+	MLX4_QP_STATE_SQD			= 5,
+	MLX4_QP_STATE_ERR			= 6,
+	MLX4_QP_STATE_SQ_DRAINING		= 7,
+	MLX4_QP_NUM_STATE
+};
+
+enum {
+	MLX4_QP_ST_RC				= 0x0,
+	MLX4_QP_ST_UC				= 0x1,
+	MLX4_QP_ST_RD				= 0x2,
+	MLX4_QP_ST_UD				= 0x3,
+	MLX4_QP_ST_XRC				= 0x6,
+	MLX4_QP_ST_MLX				= 0x7
+};
+
+enum {
+	MLX4_QP_PM_MIGRATED			= 0x3,
+	MLX4_QP_PM_ARMED			= 0x0,
+	MLX4_QP_PM_REARM			= 0x1
+};
+
+enum {
+	/* params1 */
+	MLX4_QP_BIT_SRE				= 1 << 15,
+	MLX4_QP_BIT_SWE				= 1 << 14,
+	MLX4_QP_BIT_SAE				= 1 << 13,
+	/* params2 */
+	MLX4_QP_BIT_RRE				= 1 << 15,
+	MLX4_QP_BIT_RWE				= 1 << 14,
+	MLX4_QP_BIT_RAE				= 1 << 13,
+	MLX4_QP_BIT_RIC				= 1 <<	4,
+};
+
+enum {
+	MLX4_RSS_HASH_XOR			= 0,
+	MLX4_RSS_HASH_TOP			= 1,
+
+	MLX4_RSS_UDP_IPV6			= 1 << 0,
+	MLX4_RSS_UDP_IPV4			= 1 << 1,
+	MLX4_RSS_TCP_IPV6			= 1 << 2,
+	MLX4_RSS_IPV6				= 1 << 3,
+	MLX4_RSS_TCP_IPV4			= 1 << 4,
+	MLX4_RSS_IPV4				= 1 << 5,
+
+	/* offset of mlx4_rss_context within mlx4_qp_context.pri_path */
+	MLX4_RSS_OFFSET_IN_QPC_PRI_PATH		= 0x24,
+	/* offset of being RSS indirection QP within mlx4_qp_context.flags */
+	MLX4_RSS_QPC_FLAG_OFFSET		= 13,
+};
+
+struct mlx4_rss_context {
+	__be32			base_qpn;
+	__be32			default_qpn;
+	u16			reserved;
+	u8			hash_fn;
+	u8			flags;
+	__be32			rss_key[10];
+	__be32			base_qpn_udp;
+};
+
+struct mlx4_qp_path {
+	u8			fl;
+	u8			reserved1[2];
+	u8			pkey_index;
+	u8			counter_index;
+	u8			grh_mylmc;
+	__be16			rlid;
+	u8			ackto;
+	u8			mgid_index;
+	u8			static_rate;
+	u8			hop_limit;
+	__be32			tclass_flowlabel;
+	u8			rgid[16];
+	u8			sched_queue;
+	u8			vlan_index;
+	u8			reserved3[2];
+	u8			reserved4[2];
+	u8			dmac[6];
+};
+
+struct mlx4_qp_context {
+	__be32			flags;
+	__be32			pd;
+	u8			mtu_msgmax;
+	u8			rq_size_stride;
+	u8			sq_size_stride;
+	u8			rlkey;
+	__be32			usr_page;
+	__be32			local_qpn;
+	__be32			remote_qpn;
+	struct			mlx4_qp_path pri_path;
+	struct			mlx4_qp_path alt_path;
+	__be32			params1;
+	u32			reserved1;
+	__be32			next_send_psn;
+	__be32			cqn_send;
+	u32			reserved2[2];
+	__be32			last_acked_psn;
+	__be32			ssn;
+	__be32			params2;
+	__be32			rnr_nextrecvpsn;
+	__be32			xrcd;
+	__be32			cqn_recv;
+	__be64			db_rec_addr;
+	__be32			qkey;
+	__be32			srqn;
+	__be32			msn;
+	__be16			rq_wqe_counter;
+	__be16			sq_wqe_counter;
+	u32			reserved3[2];
+	__be32			param3;
+	__be32			nummmcpeers_basemkey;
+	u8			log_page_size;
+	u8			reserved4[2];
+	u8			mtt_base_addr_h;
+	__be32			mtt_base_addr_l;
+	u32			reserved5[10];
+};
+
+/* Which firmware version adds support for NEC (NoErrorCompletion) bit */
+#define MLX4_FW_VER_WQE_CTRL_NEC mlx4_fw_ver(2, 2, 232)
+
+enum {
+	MLX4_WQE_CTRL_NEC		= 1 << 29,
+	MLX4_WQE_CTRL_FENCE		= 1 << 6,
+	MLX4_WQE_CTRL_CQ_UPDATE		= 3 << 2,
+	MLX4_WQE_CTRL_SOLICITED		= 1 << 1,
+	MLX4_WQE_CTRL_IP_CSUM		= 1 << 4,
+	MLX4_WQE_CTRL_TCP_UDP_CSUM	= 1 << 5,
+	MLX4_WQE_CTRL_INS_VLAN		= 1 << 6,
+	MLX4_WQE_CTRL_STRONG_ORDER	= 1 << 7,
+	MLX4_WQE_CTRL_FORCE_LOOPBACK	= 1 << 0,
+};
+
+struct mlx4_wqe_ctrl_seg {
+	__be32			owner_opcode;
+	__be16			vlan_tag;
+	u8			ins_vlan;
+	u8			fence_size;
+	/*
+	 * High 24 bits are SRC remote buffer; low 8 bits are flags:
+	 * [7]   SO (strong ordering)
+	 * [5]   TCP/UDP checksum
+	 * [4]   IP checksum
+	 * [3:2] C (generate completion queue entry)
+	 * [1]   SE (solicited event)
+	 * [0]   FL (force loopback)
+	 */
+	union {
+		__be32			srcrb_flags;
+		__be16			srcrb_flags16[2];
+	};
+	/*
+	 * imm is immediate data for send/RDMA write w/ immediate;
+	 * also invalidation key for send with invalidate; input
+	 * modifier for WQEs on CCQs.
+	 */
+	__be32			imm;
+};
+
+enum {
+	MLX4_WQE_MLX_VL15	= 1 << 17,
+	MLX4_WQE_MLX_SLR	= 1 << 16
+};
+
+struct mlx4_wqe_mlx_seg {
+	u8			owner;
+	u8			reserved1[2];
+	u8			opcode;
+	u8			reserved2[3];
+	u8			size;
+	/*
+	 * [17]    VL15
+	 * [16]    SLR
+	 * [15:12] static rate
+	 * [11:8]  SL
+	 * [4]     ICRC
+	 * [3:2]   C
+	 * [0]     FL (force loopback)
+	 */
+	__be32			flags;
+	__be16			rlid;
+	u16			reserved3;
+};
+
+struct mlx4_wqe_datagram_seg {
+	__be32			av[8];
+	__be32			dqpn;
+	__be32			qkey;
+	__be16			vlan;
+	u8			mac[6];
+};
+
+struct mlx4_wqe_lso_seg {
+	__be32			mss_hdr_size;
+	__be32			header[0];
+};
+
+struct mlx4_wqe_bind_seg {
+	__be32			flags1;
+	__be32			flags2;
+	__be32			new_rkey;
+	__be32			lkey;
+	__be64			addr;
+	__be64			length;
+};
+
+enum {
+	MLX4_WQE_FMR_PERM_LOCAL_READ	= 1 << 27,
+	MLX4_WQE_FMR_PERM_LOCAL_WRITE	= 1 << 28,
+	MLX4_WQE_FMR_PERM_REMOTE_READ	= 1 << 29,
+	MLX4_WQE_FMR_PERM_REMOTE_WRITE	= 1 << 30,
+	MLX4_WQE_FMR_PERM_ATOMIC	= 1 << 31
+};
+
+struct mlx4_wqe_fmr_seg {
+	__be32			flags;
+	__be32			mem_key;
+	__be64			buf_list;
+	__be64			start_addr;
+	__be64			reg_len;
+	__be32			offset;
+	__be32			page_size;
+	u32			reserved[2];
+};
+
+struct mlx4_wqe_fmr_ext_seg {
+	u8			flags;
+	u8			reserved;
+	__be16			app_mask;
+	__be16			wire_app_tag;
+	__be16			mem_app_tag;
+	__be32			wire_ref_tag_base;
+	__be32			mem_ref_tag_base;
+};
+
+struct mlx4_wqe_local_inval_seg {
+	__be32			flags;
+	u32			reserved1;
+	__be32			mem_key;
+	u32			reserved2[2];
+	__be32			guest_id;
+	__be64			pa;
+};
+
+struct mlx4_wqe_raddr_seg {
+	__be64			raddr;
+	__be32			rkey;
+	u32			reserved;
+};
+
+struct mlx4_wqe_atomic_seg {
+	__be64			swap_add;
+	__be64			compare;
+};
+
+struct mlx4_wqe_masked_atomic_seg {
+	__be64			swap_add;
+	__be64			compare;
+	__be64			swap_add_mask;
+	__be64			compare_mask;
+};
+
+struct mlx4_wqe_data_seg {
+	__be32			byte_count;
+	__be32			lkey;
+	__be64			addr;
+};
+
+enum {
+	MLX4_INLINE_ALIGN	= 64,
+	MLX4_INLINE_SEG		= 1 << 31,
+};
+
+struct mlx4_wqe_inline_seg {
+	__be32			byte_count;
+};
+
+int mlx4_qp_modify(struct mlx4_dev *dev, struct mlx4_mtt *mtt,
+		   enum mlx4_qp_state cur_state, enum mlx4_qp_state new_state,
+		   struct mlx4_qp_context *context, enum mlx4_qp_optpar optpar,
+		   int sqd_event, struct mlx4_qp *qp);
+
+int mlx4_qp_query(struct mlx4_dev *dev, struct mlx4_qp *qp,
+		  struct mlx4_qp_context *context);
+
+int mlx4_qp_to_ready(struct mlx4_dev *dev, struct mlx4_mtt *mtt,
+		     struct mlx4_qp_context *context,
+		     struct mlx4_qp *qp, enum mlx4_qp_state *qp_state);
+
+static inline struct mlx4_qp *__mlx4_qp_lookup(struct mlx4_dev *dev, u32 qpn)
+{
+	return radix_tree_lookup(&dev->qp_table_tree, qpn & (dev->caps.num_qps - 1));
+}
+
+void mlx4_qp_remove(struct mlx4_dev *dev, struct mlx4_qp *qp);
+
+#endif /* MLX4_QP_H */
diff --git a/include/linux/mlx4/srq.h b/include/linux/mlx4/srq.h
new file mode 100644
index 00000000..799a0697
--- /dev/null
+++ b/include/linux/mlx4/srq.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2007 Cisco Systems, Inc.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *	- Redistributions of source code must retain the above
+ *	  copyright notice, this list of conditions and the following
+ *	  disclaimer.
+ *
+ *	- Redistributions in binary form must reproduce the above
+ *	  copyright notice, this list of conditions and the following
+ *	  disclaimer in the documentation and/or other materials
+ *	  provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef MLX4_SRQ_H
+#define MLX4_SRQ_H
+
+struct mlx4_wqe_srq_next_seg {
+	u16			reserved1;
+	__be16			next_wqe_index;
+	u32			reserved2[3];
+};
+
+#endif /* MLX4_SRQ_H */
diff --git a/include/linux/mm.h b/include/linux/mm.h
new file mode 100644
index 00000000..3bf2f379
--- /dev/null
+++ b/include/linux/mm.h
@@ -0,0 +1,1638 @@
+#ifndef _LINUX_MM_H
+#define _LINUX_MM_H
+
+#include <linux/errno.h>
+
+#ifdef __KERNEL__
+
+#include <linux/gfp.h>
+#include <linux/bug.h>
+#include <linux/list.h>
+#include <linux/mmzone.h>
+#include <linux/rbtree.h>
+#include <linux/prio_tree.h>
+#include <linux/atomic.h>
+#include <linux/debug_locks.h>
+#include <linux/mm_types.h>
+#include <linux/range.h>
+#include <linux/pfn.h>
+#include <linux/bit_spinlock.h>
+#include <linux/shrinker.h>
+
+struct mempolicy;
+struct anon_vma;
+struct file_ra_state;
+struct user_struct;
+struct writeback_control;
+
+#ifndef CONFIG_DISCONTIGMEM          /* Don't use mapnrs, do it properly */
+extern unsigned long max_mapnr;
+#endif
+
+extern unsigned long num_physpages;
+extern unsigned long totalram_pages;
+extern void * high_memory;
+extern int page_cluster;
+
+#ifdef CONFIG_SYSCTL
+extern int sysctl_legacy_va_layout;
+#else
+#define sysctl_legacy_va_layout 0
+#endif
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+
+#define nth_page(page,n) pfn_to_page(page_to_pfn((page)) + (n))
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr) ALIGN(addr, PAGE_SIZE)
+
+/*
+ * Linux kernel virtual memory manager primitives.
+ * The idea being to have a "virtual" mm in the same way
+ * we have a virtual fs - giving a cleaner interface to the
+ * mm details, and allowing different kinds of memory mappings
+ * (from shared memory to executable loading to arbitrary
+ * mmap() functions).
+ */
+
+extern struct kmem_cache *vm_area_cachep;
+
+#ifndef CONFIG_MMU
+extern struct rb_root nommu_region_tree;
+extern struct rw_semaphore nommu_region_sem;
+
+extern unsigned int kobjsize(const void *objp);
+#endif
+
+/*
+ * vm_flags in vm_area_struct, see mm_types.h.
+ */
+#define VM_READ		0x00000001	/* currently active flags */
+#define VM_WRITE	0x00000002
+#define VM_EXEC		0x00000004
+#define VM_SHARED	0x00000008
+
+/* mprotect() hardcodes VM_MAYREAD >> 4 == VM_READ, and so for r/w/x bits. */
+#define VM_MAYREAD	0x00000010	/* limits for mprotect() etc */
+#define VM_MAYWRITE	0x00000020
+#define VM_MAYEXEC	0x00000040
+#define VM_MAYSHARE	0x00000080
+
+#define VM_GROWSDOWN	0x00000100	/* general info on the segment */
+#if defined(CONFIG_STACK_GROWSUP) || defined(CONFIG_IA64)
+#define VM_GROWSUP	0x00000200
+#else
+#define VM_GROWSUP	0x00000000
+#define VM_NOHUGEPAGE	0x00000200	/* MADV_NOHUGEPAGE marked this vma */
+#endif
+#define VM_PFNMAP	0x00000400	/* Page-ranges managed without "struct page", just pure PFN */
+#define VM_DENYWRITE	0x00000800	/* ETXTBSY on write attempts.. */
+
+#define VM_EXECUTABLE	0x00001000
+#define VM_LOCKED	0x00002000
+#define VM_IO           0x00004000	/* Memory mapped I/O or similar */
+
+					/* Used by sys_madvise() */
+#define VM_SEQ_READ	0x00008000	/* App will access data sequentially */
+#define VM_RAND_READ	0x00010000	/* App will not benefit from clustered reads */
+
+#define VM_DONTCOPY	0x00020000      /* Do not copy this vma on fork */
+#define VM_DONTEXPAND	0x00040000	/* Cannot expand with mremap() */
+#define VM_RESERVED	0x00080000	/* Count as reserved_vm like IO */
+#define VM_ACCOUNT	0x00100000	/* Is a VM accounted object */
+#define VM_NORESERVE	0x00200000	/* should the VM suppress accounting */
+#define VM_HUGETLB	0x00400000	/* Huge TLB Page VM */
+#define VM_NONLINEAR	0x00800000	/* Is non-linear (remap_file_pages) */
+#ifndef CONFIG_TRANSPARENT_HUGEPAGE
+#define VM_MAPPED_COPY	0x01000000	/* T if mapped copy of data (nommu mmap) */
+#else
+#define VM_HUGEPAGE	0x01000000	/* MADV_HUGEPAGE marked this vma */
+#endif
+#define VM_INSERTPAGE	0x02000000	/* The vma has had "vm_insert_page()" done on it */
+#define VM_NODUMP	0x04000000	/* Do not include in the core dump */
+
+#define VM_CAN_NONLINEAR 0x08000000	/* Has ->fault & does nonlinear pages */
+#define VM_MIXEDMAP	0x10000000	/* Can contain "struct page" and pure PFN pages */
+#define VM_SAO		0x20000000	/* Strong Access Ordering (powerpc) */
+#define VM_PFN_AT_MMAP	0x40000000	/* PFNMAP vma that is fully mapped at mmap time */
+#define VM_MERGEABLE	0x80000000	/* KSM may merge identical pages */
+
+/* Bits set in the VMA until the stack is in its final location */
+#define VM_STACK_INCOMPLETE_SETUP	(VM_RAND_READ | VM_SEQ_READ)
+
+#ifndef VM_STACK_DEFAULT_FLAGS		/* arch can override this */
+#define VM_STACK_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS
+#endif
+
+#ifdef CONFIG_STACK_GROWSUP
+#define VM_STACK_FLAGS	(VM_GROWSUP | VM_STACK_DEFAULT_FLAGS | VM_ACCOUNT)
+#else
+#define VM_STACK_FLAGS	(VM_GROWSDOWN | VM_STACK_DEFAULT_FLAGS | VM_ACCOUNT)
+#endif
+
+#define VM_READHINTMASK			(VM_SEQ_READ | VM_RAND_READ)
+#define VM_ClearReadHint(v)		(v)->vm_flags &= ~VM_READHINTMASK
+#define VM_NormalReadHint(v)		(!((v)->vm_flags & VM_READHINTMASK))
+#define VM_SequentialReadHint(v)	((v)->vm_flags & VM_SEQ_READ)
+#define VM_RandomReadHint(v)		((v)->vm_flags & VM_RAND_READ)
+
+/*
+ * Special vmas that are non-mergable, non-mlock()able.
+ * Note: mm/huge_memory.c VM_NO_THP depends on this definition.
+ */
+#define VM_SPECIAL (VM_IO | VM_DONTEXPAND | VM_RESERVED | VM_PFNMAP)
+
+/*
+ * mapping from the currently active vm_flags protection bits (the
+ * low four bits) to a page protection mask..
+ */
+extern pgprot_t protection_map[16];
+
+#define FAULT_FLAG_WRITE	0x01	/* Fault was a write access */
+#define FAULT_FLAG_NONLINEAR	0x02	/* Fault was via a nonlinear mapping */
+#define FAULT_FLAG_MKWRITE	0x04	/* Fault was mkwrite of existing pte */
+#define FAULT_FLAG_ALLOW_RETRY	0x08	/* Retry fault if blocking */
+#define FAULT_FLAG_RETRY_NOWAIT	0x10	/* Don't drop mmap_sem and wait when retrying */
+#define FAULT_FLAG_KILLABLE	0x20	/* The fault task is in SIGKILL killable region */
+
+/*
+ * This interface is used by x86 PAT code to identify a pfn mapping that is
+ * linear over entire vma. This is to optimize PAT code that deals with
+ * marking the physical region with a particular prot. This is not for generic
+ * mm use. Note also that this check will not work if the pfn mapping is
+ * linear for a vma starting at physical address 0. In which case PAT code
+ * falls back to slow path of reserving physical range page by page.
+ */
+static inline int is_linear_pfn_mapping(struct vm_area_struct *vma)
+{
+	return !!(vma->vm_flags & VM_PFN_AT_MMAP);
+}
+
+static inline int is_pfn_mapping(struct vm_area_struct *vma)
+{
+	return !!(vma->vm_flags & VM_PFNMAP);
+}
+
+/*
+ * vm_fault is filled by the the pagefault handler and passed to the vma's
+ * ->fault function. The vma's ->fault is responsible for returning a bitmask
+ * of VM_FAULT_xxx flags that give details about how the fault was handled.
+ *
+ * pgoff should be used in favour of virtual_address, if possible. If pgoff
+ * is used, one may set VM_CAN_NONLINEAR in the vma->vm_flags to get nonlinear
+ * mapping support.
+ */
+struct vm_fault {
+	unsigned int flags;		/* FAULT_FLAG_xxx flags */
+	pgoff_t pgoff;			/* Logical page offset based on vma */
+	void __user *virtual_address;	/* Faulting virtual address */
+
+	struct page *page;		/* ->fault handlers should return a
+					 * page here, unless VM_FAULT_NOPAGE
+					 * is set (which is also implied by
+					 * VM_FAULT_ERROR).
+					 */
+};
+
+/*
+ * These are the virtual MM functions - opening of an area, closing and
+ * unmapping it (needed to keep files on disk up-to-date etc), pointer
+ * to the functions called when a no-page or a wp-page exception occurs. 
+ */
+struct vm_operations_struct {
+	void (*open)(struct vm_area_struct * area);
+	void (*close)(struct vm_area_struct * area);
+	int (*fault)(struct vm_area_struct *vma, struct vm_fault *vmf);
+
+	/* notification that a previously read-only page is about to become
+	 * writable, if an error is returned it will cause a SIGBUS */
+	int (*page_mkwrite)(struct vm_area_struct *vma, struct vm_fault *vmf);
+
+	/* called by access_process_vm when get_user_pages() fails, typically
+	 * for use by special VMAs that can switch between memory and hardware
+	 */
+	int (*access)(struct vm_area_struct *vma, unsigned long addr,
+		      void *buf, int len, int write);
+#ifdef CONFIG_NUMA
+	/*
+	 * set_policy() op must add a reference to any non-NULL @new mempolicy
+	 * to hold the policy upon return.  Caller should pass NULL @new to
+	 * remove a policy and fall back to surrounding context--i.e. do not
+	 * install a MPOL_DEFAULT policy, nor the task or system default
+	 * mempolicy.
+	 */
+	int (*set_policy)(struct vm_area_struct *vma, struct mempolicy *new);
+
+	/*
+	 * get_policy() op must add reference [mpol_get()] to any policy at
+	 * (vma,addr) marked as MPOL_SHARED.  The shared policy infrastructure
+	 * in mm/mempolicy.c will do this automatically.
+	 * get_policy() must NOT add a ref if the policy at (vma,addr) is not
+	 * marked as MPOL_SHARED. vma policies are protected by the mmap_sem.
+	 * If no [shared/vma] mempolicy exists at the addr, get_policy() op
+	 * must return NULL--i.e., do not "fallback" to task or system default
+	 * policy.
+	 */
+	struct mempolicy *(*get_policy)(struct vm_area_struct *vma,
+					unsigned long addr);
+	int (*migrate)(struct vm_area_struct *vma, const nodemask_t *from,
+		const nodemask_t *to, unsigned long flags);
+#endif
+};
+
+struct mmu_gather;
+struct inode;
+
+#define page_private(page)		((page)->private)
+#define set_page_private(page, v)	((page)->private = (v))
+
+/*
+ * FIXME: take this include out, include page-flags.h in
+ * files which need it (119 of them)
+ */
+#include <linux/page-flags.h>
+#include <linux/huge_mm.h>
+
+/*
+ * Methods to modify the page usage count.
+ *
+ * What counts for a page usage:
+ * - cache mapping   (page->mapping)
+ * - private data    (page->private)
+ * - page mapped in a task's page tables, each mapping
+ *   is counted separately
+ *
+ * Also, many kernel routines increase the page count before a critical
+ * routine so they can be sure the page doesn't go away from under them.
+ */
+
+/*
+ * Drop a ref, return true if the refcount fell to zero (the page has no users)
+ */
+static inline int put_page_testzero(struct page *page)
+{
+	VM_BUG_ON(atomic_read(&page->_count) == 0);
+	return atomic_dec_and_test(&page->_count);
+}
+
+/*
+ * Try to grab a ref unless the page has a refcount of zero, return false if
+ * that is the case.
+ */
+static inline int get_page_unless_zero(struct page *page)
+{
+	return atomic_inc_not_zero(&page->_count);
+}
+
+extern int page_is_ram(unsigned long pfn);
+
+/* Support for virtually mapped pages */
+struct page *vmalloc_to_page(const void *addr);
+unsigned long vmalloc_to_pfn(const void *addr);
+
+/*
+ * Determine if an address is within the vmalloc range
+ *
+ * On nommu, vmalloc/vfree wrap through kmalloc/kfree directly, so there
+ * is no special casing required.
+ */
+static inline int is_vmalloc_addr(const void *x)
+{
+#ifdef CONFIG_MMU
+	unsigned long addr = (unsigned long)x;
+
+	return addr >= VMALLOC_START && addr < VMALLOC_END;
+#else
+	return 0;
+#endif
+}
+#ifdef CONFIG_MMU
+extern int is_vmalloc_or_module_addr(const void *x);
+#else
+static inline int is_vmalloc_or_module_addr(const void *x)
+{
+	return 0;
+}
+#endif
+
+static inline void compound_lock(struct page *page)
+{
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+	bit_spin_lock(PG_compound_lock, &page->flags);
+#endif
+}
+
+static inline void compound_unlock(struct page *page)
+{
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+	bit_spin_unlock(PG_compound_lock, &page->flags);
+#endif
+}
+
+static inline unsigned long compound_lock_irqsave(struct page *page)
+{
+	unsigned long uninitialized_var(flags);
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+	local_irq_save(flags);
+	compound_lock(page);
+#endif
+	return flags;
+}
+
+static inline void compound_unlock_irqrestore(struct page *page,
+					      unsigned long flags)
+{
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+	compound_unlock(page);
+	local_irq_restore(flags);
+#endif
+}
+
+static inline struct page *compound_head(struct page *page)
+{
+	if (unlikely(PageTail(page)))
+		return page->first_page;
+	return page;
+}
+
+/*
+ * The atomic page->_mapcount, starts from -1: so that transitions
+ * both from it and to it can be tracked, using atomic_inc_and_test
+ * and atomic_add_negative(-1).
+ */
+static inline void reset_page_mapcount(struct page *page)
+{
+	atomic_set(&(page)->_mapcount, -1);
+}
+
+static inline int page_mapcount(struct page *page)
+{
+	return atomic_read(&(page)->_mapcount) + 1;
+}
+
+static inline int page_count(struct page *page)
+{
+	return atomic_read(&compound_head(page)->_count);
+}
+
+static inline void get_huge_page_tail(struct page *page)
+{
+	/*
+	 * __split_huge_page_refcount() cannot run
+	 * from under us.
+	 */
+	VM_BUG_ON(page_mapcount(page) < 0);
+	VM_BUG_ON(atomic_read(&page->_count) != 0);
+	atomic_inc(&page->_mapcount);
+}
+
+extern bool __get_page_tail(struct page *page);
+
+static inline void get_page(struct page *page)
+{
+	if (unlikely(PageTail(page)))
+		if (likely(__get_page_tail(page)))
+			return;
+	/*
+	 * Getting a normal page or the head of a compound page
+	 * requires to already have an elevated page->_count.
+	 */
+	VM_BUG_ON(atomic_read(&page->_count) <= 0);
+	atomic_inc(&page->_count);
+}
+
+static inline struct page *virt_to_head_page(const void *x)
+{
+	struct page *page = virt_to_page(x);
+	return compound_head(page);
+}
+
+/*
+ * Setup the page count before being freed into the page allocator for
+ * the first time (boot or memory hotplug)
+ */
+static inline void init_page_count(struct page *page)
+{
+	atomic_set(&page->_count, 1);
+}
+
+/*
+ * PageBuddy() indicate that the page is free and in the buddy system
+ * (see mm/page_alloc.c).
+ *
+ * PAGE_BUDDY_MAPCOUNT_VALUE must be <= -2 but better not too close to
+ * -2 so that an underflow of the page_mapcount() won't be mistaken
+ * for a genuine PAGE_BUDDY_MAPCOUNT_VALUE. -128 can be created very
+ * efficiently by most CPU architectures.
+ */
+#define PAGE_BUDDY_MAPCOUNT_VALUE (-128)
+
+static inline int PageBuddy(struct page *page)
+{
+	return atomic_read(&page->_mapcount) == PAGE_BUDDY_MAPCOUNT_VALUE;
+}
+
+static inline void __SetPageBuddy(struct page *page)
+{
+	VM_BUG_ON(atomic_read(&page->_mapcount) != -1);
+	atomic_set(&page->_mapcount, PAGE_BUDDY_MAPCOUNT_VALUE);
+}
+
+static inline void __ClearPageBuddy(struct page *page)
+{
+	VM_BUG_ON(!PageBuddy(page));
+	atomic_set(&page->_mapcount, -1);
+}
+
+void put_page(struct page *page);
+void put_pages_list(struct list_head *pages);
+
+void split_page(struct page *page, unsigned int order);
+int split_free_page(struct page *page);
+
+/*
+ * Compound pages have a destructor function.  Provide a
+ * prototype for that function and accessor functions.
+ * These are _only_ valid on the head of a PG_compound page.
+ */
+typedef void compound_page_dtor(struct page *);
+
+static inline void set_compound_page_dtor(struct page *page,
+						compound_page_dtor *dtor)
+{
+	page[1].lru.next = (void *)dtor;
+}
+
+static inline compound_page_dtor *get_compound_page_dtor(struct page *page)
+{
+	return (compound_page_dtor *)page[1].lru.next;
+}
+
+static inline int compound_order(struct page *page)
+{
+	if (!PageHead(page))
+		return 0;
+	return (unsigned long)page[1].lru.prev;
+}
+
+static inline int compound_trans_order(struct page *page)
+{
+	int order;
+	unsigned long flags;
+
+	if (!PageHead(page))
+		return 0;
+
+	flags = compound_lock_irqsave(page);
+	order = compound_order(page);
+	compound_unlock_irqrestore(page, flags);
+	return order;
+}
+
+static inline void set_compound_order(struct page *page, unsigned long order)
+{
+	page[1].lru.prev = (void *)order;
+}
+
+#ifdef CONFIG_MMU
+/*
+ * Do pte_mkwrite, but only if the vma says VM_WRITE.  We do this when
+ * servicing faults for write access.  In the normal case, do always want
+ * pte_mkwrite.  But get_user_pages can cause write faults for mappings
+ * that do not have writing enabled, when used by access_process_vm.
+ */
+static inline pte_t maybe_mkwrite(pte_t pte, struct vm_area_struct *vma)
+{
+	if (likely(vma->vm_flags & VM_WRITE))
+		pte = pte_mkwrite(pte);
+	return pte;
+}
+#endif
+
+/*
+ * Multiple processes may "see" the same page. E.g. for untouched
+ * mappings of /dev/null, all processes see the same page full of
+ * zeroes, and text pages of executables and shared libraries have
+ * only one copy in memory, at most, normally.
+ *
+ * For the non-reserved pages, page_count(page) denotes a reference count.
+ *   page_count() == 0 means the page is free. page->lru is then used for
+ *   freelist management in the buddy allocator.
+ *   page_count() > 0  means the page has been allocated.
+ *
+ * Pages are allocated by the slab allocator in order to provide memory
+ * to kmalloc and kmem_cache_alloc. In this case, the management of the
+ * page, and the fields in 'struct page' are the responsibility of mm/slab.c
+ * unless a particular usage is carefully commented. (the responsibility of
+ * freeing the kmalloc memory is the caller's, of course).
+ *
+ * A page may be used by anyone else who does a __get_free_page().
+ * In this case, page_count still tracks the references, and should only
+ * be used through the normal accessor functions. The top bits of page->flags
+ * and page->virtual store page management information, but all other fields
+ * are unused and could be used privately, carefully. The management of this
+ * page is the responsibility of the one who allocated it, and those who have
+ * subsequently been given references to it.
+ *
+ * The other pages (we may call them "pagecache pages") are completely
+ * managed by the Linux memory manager: I/O, buffers, swapping etc.
+ * The following discussion applies only to them.
+ *
+ * A pagecache page contains an opaque `private' member, which belongs to the
+ * page's address_space. Usually, this is the address of a circular list of
+ * the page's disk buffers. PG_private must be set to tell the VM to call
+ * into the filesystem to release these pages.
+ *
+ * A page may belong to an inode's memory mapping. In this case, page->mapping
+ * is the pointer to the inode, and page->index is the file offset of the page,
+ * in units of PAGE_CACHE_SIZE.
+ *
+ * If pagecache pages are not associated with an inode, they are said to be
+ * anonymous pages. These may become associated with the swapcache, and in that
+ * case PG_swapcache is set, and page->private is an offset into the swapcache.
+ *
+ * In either case (swapcache or inode backed), the pagecache itself holds one
+ * reference to the page. Setting PG_private should also increment the
+ * refcount. The each user mapping also has a reference to the page.
+ *
+ * The pagecache pages are stored in a per-mapping radix tree, which is
+ * rooted at mapping->page_tree, and indexed by offset.
+ * Where 2.4 and early 2.6 kernels kept dirty/clean pages in per-address_space
+ * lists, we instead now tag pages as dirty/writeback in the radix tree.
+ *
+ * All pagecache pages may be subject to I/O:
+ * - inode pages may need to be read from disk,
+ * - inode pages which have been modified and are MAP_SHARED may need
+ *   to be written back to the inode on disk,
+ * - anonymous pages (including MAP_PRIVATE file mappings) which have been
+ *   modified may need to be swapped out to swap space and (later) to be read
+ *   back into memory.
+ */
+
+/*
+ * The zone field is never updated after free_area_init_core()
+ * sets it, so none of the operations on it need to be atomic.
+ */
+
+
+/*
+ * page->flags layout:
+ *
+ * There are three possibilities for how page->flags get
+ * laid out.  The first is for the normal case, without
+ * sparsemem.  The second is for sparsemem when there is
+ * plenty of space for node and section.  The last is when
+ * we have run out of space and have to fall back to an
+ * alternate (slower) way of determining the node.
+ *
+ * No sparsemem or sparsemem vmemmap: |       NODE     | ZONE | ... | FLAGS |
+ * classic sparse with space for node:| SECTION | NODE | ZONE | ... | FLAGS |
+ * classic sparse no space for node:  | SECTION |     ZONE    | ... | FLAGS |
+ */
+#if defined(CONFIG_SPARSEMEM) && !defined(CONFIG_SPARSEMEM_VMEMMAP)
+#define SECTIONS_WIDTH		SECTIONS_SHIFT
+#else
+#define SECTIONS_WIDTH		0
+#endif
+
+#define ZONES_WIDTH		ZONES_SHIFT
+
+#if SECTIONS_WIDTH+ZONES_WIDTH+NODES_SHIFT <= BITS_PER_LONG - NR_PAGEFLAGS
+#define NODES_WIDTH		NODES_SHIFT
+#else
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+#error "Vmemmap: No space for nodes field in page flags"
+#endif
+#define NODES_WIDTH		0
+#endif
+
+/* Page flags: | [SECTION] | [NODE] | ZONE | ... | FLAGS | */
+#define SECTIONS_PGOFF		((sizeof(unsigned long)*8) - SECTIONS_WIDTH)
+#define NODES_PGOFF		(SECTIONS_PGOFF - NODES_WIDTH)
+#define ZONES_PGOFF		(NODES_PGOFF - ZONES_WIDTH)
+
+/*
+ * We are going to use the flags for the page to node mapping if its in
+ * there.  This includes the case where there is no node, so it is implicit.
+ */
+#if !(NODES_WIDTH > 0 || NODES_SHIFT == 0)
+#define NODE_NOT_IN_PAGE_FLAGS
+#endif
+
+/*
+ * Define the bit shifts to access each section.  For non-existent
+ * sections we define the shift as 0; that plus a 0 mask ensures
+ * the compiler will optimise away reference to them.
+ */
+#define SECTIONS_PGSHIFT	(SECTIONS_PGOFF * (SECTIONS_WIDTH != 0))
+#define NODES_PGSHIFT		(NODES_PGOFF * (NODES_WIDTH != 0))
+#define ZONES_PGSHIFT		(ZONES_PGOFF * (ZONES_WIDTH != 0))
+
+/* NODE:ZONE or SECTION:ZONE is used to ID a zone for the buddy allocator */
+#ifdef NODE_NOT_IN_PAGE_FLAGS
+#define ZONEID_SHIFT		(SECTIONS_SHIFT + ZONES_SHIFT)
+#define ZONEID_PGOFF		((SECTIONS_PGOFF < ZONES_PGOFF)? \
+						SECTIONS_PGOFF : ZONES_PGOFF)
+#else
+#define ZONEID_SHIFT		(NODES_SHIFT + ZONES_SHIFT)
+#define ZONEID_PGOFF		((NODES_PGOFF < ZONES_PGOFF)? \
+						NODES_PGOFF : ZONES_PGOFF)
+#endif
+
+#define ZONEID_PGSHIFT		(ZONEID_PGOFF * (ZONEID_SHIFT != 0))
+
+#if SECTIONS_WIDTH+NODES_WIDTH+ZONES_WIDTH > BITS_PER_LONG - NR_PAGEFLAGS
+#error SECTIONS_WIDTH+NODES_WIDTH+ZONES_WIDTH > BITS_PER_LONG - NR_PAGEFLAGS
+#endif
+
+#define ZONES_MASK		((1UL << ZONES_WIDTH) - 1)
+#define NODES_MASK		((1UL << NODES_WIDTH) - 1)
+#define SECTIONS_MASK		((1UL << SECTIONS_WIDTH) - 1)
+#define ZONEID_MASK		((1UL << ZONEID_SHIFT) - 1)
+
+static inline enum zone_type page_zonenum(const struct page *page)
+{
+	return (page->flags >> ZONES_PGSHIFT) & ZONES_MASK;
+}
+
+/*
+ * The identification function is only used by the buddy allocator for
+ * determining if two pages could be buddies. We are not really
+ * identifying a zone since we could be using a the section number
+ * id if we have not node id available in page flags.
+ * We guarantee only that it will return the same value for two
+ * combinable pages in a zone.
+ */
+static inline int page_zone_id(struct page *page)
+{
+	return (page->flags >> ZONEID_PGSHIFT) & ZONEID_MASK;
+}
+
+static inline int zone_to_nid(struct zone *zone)
+{
+#ifdef CONFIG_NUMA
+	return zone->node;
+#else
+	return 0;
+#endif
+}
+
+#ifdef NODE_NOT_IN_PAGE_FLAGS
+extern int page_to_nid(const struct page *page);
+#else
+static inline int page_to_nid(const struct page *page)
+{
+	return (page->flags >> NODES_PGSHIFT) & NODES_MASK;
+}
+#endif
+
+static inline struct zone *page_zone(const struct page *page)
+{
+	return &NODE_DATA(page_to_nid(page))->node_zones[page_zonenum(page)];
+}
+
+#if defined(CONFIG_SPARSEMEM) && !defined(CONFIG_SPARSEMEM_VMEMMAP)
+static inline void set_page_section(struct page *page, unsigned long section)
+{
+	page->flags &= ~(SECTIONS_MASK << SECTIONS_PGSHIFT);
+	page->flags |= (section & SECTIONS_MASK) << SECTIONS_PGSHIFT;
+}
+
+static inline unsigned long page_to_section(const struct page *page)
+{
+	return (page->flags >> SECTIONS_PGSHIFT) & SECTIONS_MASK;
+}
+#endif
+
+static inline void set_page_zone(struct page *page, enum zone_type zone)
+{
+	page->flags &= ~(ZONES_MASK << ZONES_PGSHIFT);
+	page->flags |= (zone & ZONES_MASK) << ZONES_PGSHIFT;
+}
+
+static inline void set_page_node(struct page *page, unsigned long node)
+{
+	page->flags &= ~(NODES_MASK << NODES_PGSHIFT);
+	page->flags |= (node & NODES_MASK) << NODES_PGSHIFT;
+}
+
+static inline void set_page_links(struct page *page, enum zone_type zone,
+	unsigned long node, unsigned long pfn)
+{
+	set_page_zone(page, zone);
+	set_page_node(page, node);
+#if defined(CONFIG_SPARSEMEM) && !defined(CONFIG_SPARSEMEM_VMEMMAP)
+	set_page_section(page, pfn_to_section_nr(pfn));
+#endif
+}
+
+/*
+ * Some inline functions in vmstat.h depend on page_zone()
+ */
+#include <linux/vmstat.h>
+
+static __always_inline void *lowmem_page_address(const struct page *page)
+{
+	return __va(PFN_PHYS(page_to_pfn(page)));
+}
+
+#if defined(CONFIG_HIGHMEM) && !defined(WANT_PAGE_VIRTUAL)
+#define HASHED_PAGE_VIRTUAL
+#endif
+
+#if defined(WANT_PAGE_VIRTUAL)
+#define page_address(page) ((page)->virtual)
+#define set_page_address(page, address)			\
+	do {						\
+		(page)->virtual = (address);		\
+	} while(0)
+#define page_address_init()  do { } while(0)
+#endif
+
+#if defined(HASHED_PAGE_VIRTUAL)
+void *page_address(const struct page *page);
+void set_page_address(struct page *page, void *virtual);
+void page_address_init(void);
+#endif
+
+#if !defined(HASHED_PAGE_VIRTUAL) && !defined(WANT_PAGE_VIRTUAL)
+#define page_address(page) lowmem_page_address(page)
+#define set_page_address(page, address)  do { } while(0)
+#define page_address_init()  do { } while(0)
+#endif
+
+/*
+ * On an anonymous page mapped into a user virtual memory area,
+ * page->mapping points to its anon_vma, not to a struct address_space;
+ * with the PAGE_MAPPING_ANON bit set to distinguish it.  See rmap.h.
+ *
+ * On an anonymous page in a VM_MERGEABLE area, if CONFIG_KSM is enabled,
+ * the PAGE_MAPPING_KSM bit may be set along with the PAGE_MAPPING_ANON bit;
+ * and then page->mapping points, not to an anon_vma, but to a private
+ * structure which KSM associates with that merged page.  See ksm.h.
+ *
+ * PAGE_MAPPING_KSM without PAGE_MAPPING_ANON is currently never used.
+ *
+ * Please note that, confusingly, "page_mapping" refers to the inode
+ * address_space which maps the page from disk; whereas "page_mapped"
+ * refers to user virtual address space into which the page is mapped.
+ */
+#define PAGE_MAPPING_ANON	1
+#define PAGE_MAPPING_KSM	2
+#define PAGE_MAPPING_FLAGS	(PAGE_MAPPING_ANON | PAGE_MAPPING_KSM)
+
+extern struct address_space swapper_space;
+static inline struct address_space *page_mapping(struct page *page)
+{
+	struct address_space *mapping = page->mapping;
+
+	VM_BUG_ON(PageSlab(page));
+	if (unlikely(PageSwapCache(page)))
+		mapping = &swapper_space;
+	else if ((unsigned long)mapping & PAGE_MAPPING_ANON)
+		mapping = NULL;
+	return mapping;
+}
+
+/* Neutral page->mapping pointer to address_space or anon_vma or other */
+static inline void *page_rmapping(struct page *page)
+{
+	return (void *)((unsigned long)page->mapping & ~PAGE_MAPPING_FLAGS);
+}
+
+static inline int PageAnon(struct page *page)
+{
+	return ((unsigned long)page->mapping & PAGE_MAPPING_ANON) != 0;
+}
+
+/*
+ * Return the pagecache index of the passed page.  Regular pagecache pages
+ * use ->index whereas swapcache pages use ->private
+ */
+static inline pgoff_t page_index(struct page *page)
+{
+	if (unlikely(PageSwapCache(page)))
+		return page_private(page);
+	return page->index;
+}
+
+/*
+ * Return true if this page is mapped into pagetables.
+ */
+static inline int page_mapped(struct page *page)
+{
+	return atomic_read(&(page)->_mapcount) >= 0;
+}
+
+/*
+ * Different kinds of faults, as returned by handle_mm_fault().
+ * Used to decide whether a process gets delivered SIGBUS or
+ * just gets major/minor fault counters bumped up.
+ */
+
+#define VM_FAULT_MINOR	0 /* For backwards compat. Remove me quickly. */
+
+#define VM_FAULT_OOM	0x0001
+#define VM_FAULT_SIGBUS	0x0002
+#define VM_FAULT_MAJOR	0x0004
+#define VM_FAULT_WRITE	0x0008	/* Special case for get_user_pages */
+#define VM_FAULT_HWPOISON 0x0010	/* Hit poisoned small page */
+#define VM_FAULT_HWPOISON_LARGE 0x0020  /* Hit poisoned large page. Index encoded in upper bits */
+
+#define VM_FAULT_NOPAGE	0x0100	/* ->fault installed the pte, not return page */
+#define VM_FAULT_LOCKED	0x0200	/* ->fault locked the returned page */
+#define VM_FAULT_RETRY	0x0400	/* ->fault blocked, must retry */
+
+#define VM_FAULT_HWPOISON_LARGE_MASK 0xf000 /* encodes hpage index for large hwpoison */
+
+#define VM_FAULT_ERROR	(VM_FAULT_OOM | VM_FAULT_SIGBUS | VM_FAULT_HWPOISON | \
+			 VM_FAULT_HWPOISON_LARGE)
+
+/* Encode hstate index for a hwpoisoned large page */
+#define VM_FAULT_SET_HINDEX(x) ((x) << 12)
+#define VM_FAULT_GET_HINDEX(x) (((x) >> 12) & 0xf)
+
+/*
+ * Can be called by the pagefault handler when it gets a VM_FAULT_OOM.
+ */
+extern void pagefault_out_of_memory(void);
+
+#define offset_in_page(p)	((unsigned long)(p) & ~PAGE_MASK)
+
+/*
+ * Flags passed to show_mem() and show_free_areas() to suppress output in
+ * various contexts.
+ */
+#define SHOW_MEM_FILTER_NODES	(0x0001u)	/* filter disallowed nodes */
+
+extern void show_free_areas(unsigned int flags);
+extern bool skip_free_areas_node(unsigned int flags, int nid);
+
+int shmem_lock(struct file *file, int lock, struct user_struct *user);
+struct file *shmem_file_setup(const char *name, loff_t size, unsigned long flags);
+void shmem_set_file(struct vm_area_struct *vma, struct file *file);
+int shmem_zero_setup(struct vm_area_struct *);
+
+extern int can_do_mlock(void);
+extern int user_shm_lock(size_t, struct user_struct *);
+extern void user_shm_unlock(size_t, struct user_struct *);
+
+/*
+ * Parameter block passed down to zap_pte_range in exceptional cases.
+ */
+struct zap_details {
+	struct vm_area_struct *nonlinear_vma;	/* Check page->index if set */
+	struct address_space *check_mapping;	/* Check page->mapping if set */
+	pgoff_t	first_index;			/* Lowest page->index to unmap */
+	pgoff_t last_index;			/* Highest page->index to unmap */
+};
+
+struct page *vm_normal_page(struct vm_area_struct *vma, unsigned long addr,
+		pte_t pte);
+
+int zap_vma_ptes(struct vm_area_struct *vma, unsigned long address,
+		unsigned long size);
+void zap_page_range(struct vm_area_struct *vma, unsigned long address,
+		unsigned long size, struct zap_details *);
+void unmap_vmas(struct mmu_gather *tlb,
+		struct vm_area_struct *start_vma, unsigned long start_addr,
+		unsigned long end_addr, unsigned long *nr_accounted,
+		struct zap_details *);
+
+/**
+ * mm_walk - callbacks for walk_page_range
+ * @pgd_entry: if set, called for each non-empty PGD (top-level) entry
+ * @pud_entry: if set, called for each non-empty PUD (2nd-level) entry
+ * @pmd_entry: if set, called for each non-empty PMD (3rd-level) entry
+ *	       this handler is required to be able to handle
+ *	       pmd_trans_huge() pmds.  They may simply choose to
+ *	       split_huge_page() instead of handling it explicitly.
+ * @pte_entry: if set, called for each non-empty PTE (4th-level) entry
+ * @pte_hole: if set, called for each hole at all levels
+ * @hugetlb_entry: if set, called for each hugetlb entry
+ *		   *Caution*: The caller must hold mmap_sem() if @hugetlb_entry
+ * 			      is used.
+ *
+ * (see walk_page_range for more details)
+ */
+struct mm_walk {
+	int (*pgd_entry)(pgd_t *, unsigned long, unsigned long, struct mm_walk *);
+	int (*pud_entry)(pud_t *, unsigned long, unsigned long, struct mm_walk *);
+	int (*pmd_entry)(pmd_t *, unsigned long, unsigned long, struct mm_walk *);
+	int (*pte_entry)(pte_t *, unsigned long, unsigned long, struct mm_walk *);
+	int (*pte_hole)(unsigned long, unsigned long, struct mm_walk *);
+	int (*hugetlb_entry)(pte_t *, unsigned long,
+			     unsigned long, unsigned long, struct mm_walk *);
+	struct mm_struct *mm;
+	void *private;
+};
+
+int walk_page_range(unsigned long addr, unsigned long end,
+		struct mm_walk *walk);
+void free_pgd_range(struct mmu_gather *tlb, unsigned long addr,
+		unsigned long end, unsigned long floor, unsigned long ceiling);
+int copy_page_range(struct mm_struct *dst, struct mm_struct *src,
+			struct vm_area_struct *vma);
+void unmap_mapping_range(struct address_space *mapping,
+		loff_t const holebegin, loff_t const holelen, int even_cows);
+int follow_pfn(struct vm_area_struct *vma, unsigned long address,
+	unsigned long *pfn);
+int follow_phys(struct vm_area_struct *vma, unsigned long address,
+		unsigned int flags, unsigned long *prot, resource_size_t *phys);
+int generic_access_phys(struct vm_area_struct *vma, unsigned long addr,
+			void *buf, int len, int write);
+
+static inline void unmap_shared_mapping_range(struct address_space *mapping,
+		loff_t const holebegin, loff_t const holelen)
+{
+	unmap_mapping_range(mapping, holebegin, holelen, 0);
+}
+
+extern void truncate_pagecache(struct inode *inode, loff_t old, loff_t new);
+extern void truncate_setsize(struct inode *inode, loff_t newsize);
+extern int vmtruncate(struct inode *inode, loff_t offset);
+extern int vmtruncate_range(struct inode *inode, loff_t offset, loff_t end);
+void truncate_pagecache_range(struct inode *inode, loff_t offset, loff_t end);
+int truncate_inode_page(struct address_space *mapping, struct page *page);
+int generic_error_remove_page(struct address_space *mapping, struct page *page);
+
+int invalidate_inode_page(struct page *page);
+
+#ifdef CONFIG_MMU
+extern int handle_mm_fault(struct mm_struct *mm, struct vm_area_struct *vma,
+			unsigned long address, unsigned int flags);
+extern int fixup_user_fault(struct task_struct *tsk, struct mm_struct *mm,
+			    unsigned long address, unsigned int fault_flags);
+#else
+static inline int handle_mm_fault(struct mm_struct *mm,
+			struct vm_area_struct *vma, unsigned long address,
+			unsigned int flags)
+{
+	/* should never happen if there's no MMU */
+	BUG();
+	return VM_FAULT_SIGBUS;
+}
+static inline int fixup_user_fault(struct task_struct *tsk,
+		struct mm_struct *mm, unsigned long address,
+		unsigned int fault_flags)
+{
+	/* should never happen if there's no MMU */
+	BUG();
+	return -EFAULT;
+}
+#endif
+
+extern int make_pages_present(unsigned long addr, unsigned long end);
+extern int access_process_vm(struct task_struct *tsk, unsigned long addr, void *buf, int len, int write);
+extern int access_remote_vm(struct mm_struct *mm, unsigned long addr,
+		void *buf, int len, int write);
+
+int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
+		     unsigned long start, int len, unsigned int foll_flags,
+		     struct page **pages, struct vm_area_struct **vmas,
+		     int *nonblocking);
+int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
+			unsigned long start, int nr_pages, int write, int force,
+			struct page **pages, struct vm_area_struct **vmas);
+int get_user_pages_fast(unsigned long start, int nr_pages, int write,
+			struct page **pages);
+struct page *get_dump_page(unsigned long addr);
+
+extern int try_to_release_page(struct page * page, gfp_t gfp_mask);
+extern void do_invalidatepage(struct page *page, unsigned long offset);
+
+int __set_page_dirty_nobuffers(struct page *page);
+int __set_page_dirty_no_writeback(struct page *page);
+int redirty_page_for_writepage(struct writeback_control *wbc,
+				struct page *page);
+void account_page_dirtied(struct page *page, struct address_space *mapping);
+void account_page_writeback(struct page *page);
+int set_page_dirty(struct page *page);
+int set_page_dirty_lock(struct page *page);
+int clear_page_dirty_for_io(struct page *page);
+
+/* Is the vma a continuation of the stack vma above it? */
+static inline int vma_growsdown(struct vm_area_struct *vma, unsigned long addr)
+{
+	return vma && (vma->vm_end == addr) && (vma->vm_flags & VM_GROWSDOWN);
+}
+
+static inline int stack_guard_page_start(struct vm_area_struct *vma,
+					     unsigned long addr)
+{
+	return (vma->vm_flags & VM_GROWSDOWN) &&
+		(vma->vm_start == addr) &&
+		!vma_growsdown(vma->vm_prev, addr);
+}
+
+/* Is the vma a continuation of the stack vma below it? */
+static inline int vma_growsup(struct vm_area_struct *vma, unsigned long addr)
+{
+	return vma && (vma->vm_start == addr) && (vma->vm_flags & VM_GROWSUP);
+}
+
+static inline int stack_guard_page_end(struct vm_area_struct *vma,
+					   unsigned long addr)
+{
+	return (vma->vm_flags & VM_GROWSUP) &&
+		(vma->vm_end == addr) &&
+		!vma_growsup(vma->vm_next, addr);
+}
+
+extern pid_t
+vm_is_stack(struct task_struct *task, struct vm_area_struct *vma, int in_group);
+
+extern unsigned long move_page_tables(struct vm_area_struct *vma,
+		unsigned long old_addr, struct vm_area_struct *new_vma,
+		unsigned long new_addr, unsigned long len);
+extern unsigned long do_mremap(unsigned long addr,
+			       unsigned long old_len, unsigned long new_len,
+			       unsigned long flags, unsigned long new_addr);
+extern int mprotect_fixup(struct vm_area_struct *vma,
+			  struct vm_area_struct **pprev, unsigned long start,
+			  unsigned long end, unsigned long newflags);
+
+/*
+ * doesn't attempt to fault and will return short.
+ */
+int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
+			  struct page **pages);
+/*
+ * per-process(per-mm_struct) statistics.
+ */
+static inline unsigned long get_mm_counter(struct mm_struct *mm, int member)
+{
+	long val = atomic_long_read(&mm->rss_stat.count[member]);
+
+#ifdef SPLIT_RSS_COUNTING
+	/*
+	 * counter is updated in asynchronous manner and may go to minus.
+	 * But it's never be expected number for users.
+	 */
+	if (val < 0)
+		val = 0;
+#endif
+	return (unsigned long)val;
+}
+
+static inline void add_mm_counter(struct mm_struct *mm, int member, long value)
+{
+	atomic_long_add(value, &mm->rss_stat.count[member]);
+}
+
+static inline void inc_mm_counter(struct mm_struct *mm, int member)
+{
+	atomic_long_inc(&mm->rss_stat.count[member]);
+}
+
+static inline void dec_mm_counter(struct mm_struct *mm, int member)
+{
+	atomic_long_dec(&mm->rss_stat.count[member]);
+}
+
+static inline unsigned long get_mm_rss(struct mm_struct *mm)
+{
+	return get_mm_counter(mm, MM_FILEPAGES) +
+		get_mm_counter(mm, MM_ANONPAGES);
+}
+
+static inline unsigned long get_mm_hiwater_rss(struct mm_struct *mm)
+{
+	return max(mm->hiwater_rss, get_mm_rss(mm));
+}
+
+static inline unsigned long get_mm_hiwater_vm(struct mm_struct *mm)
+{
+	return max(mm->hiwater_vm, mm->total_vm);
+}
+
+static inline void update_hiwater_rss(struct mm_struct *mm)
+{
+	unsigned long _rss = get_mm_rss(mm);
+
+	if ((mm)->hiwater_rss < _rss)
+		(mm)->hiwater_rss = _rss;
+}
+
+static inline void update_hiwater_vm(struct mm_struct *mm)
+{
+	if (mm->hiwater_vm < mm->total_vm)
+		mm->hiwater_vm = mm->total_vm;
+}
+
+static inline void setmax_mm_hiwater_rss(unsigned long *maxrss,
+					 struct mm_struct *mm)
+{
+	unsigned long hiwater_rss = get_mm_hiwater_rss(mm);
+
+	if (*maxrss < hiwater_rss)
+		*maxrss = hiwater_rss;
+}
+
+#if defined(SPLIT_RSS_COUNTING)
+void sync_mm_rss(struct mm_struct *mm);
+#else
+static inline void sync_mm_rss(struct mm_struct *mm)
+{
+}
+#endif
+
+int vma_wants_writenotify(struct vm_area_struct *vma);
+
+extern pte_t *__get_locked_pte(struct mm_struct *mm, unsigned long addr,
+			       spinlock_t **ptl);
+static inline pte_t *get_locked_pte(struct mm_struct *mm, unsigned long addr,
+				    spinlock_t **ptl)
+{
+	pte_t *ptep;
+	__cond_lock(*ptl, ptep = __get_locked_pte(mm, addr, ptl));
+	return ptep;
+}
+
+#ifdef __PAGETABLE_PUD_FOLDED
+static inline int __pud_alloc(struct mm_struct *mm, pgd_t *pgd,
+						unsigned long address)
+{
+	return 0;
+}
+#else
+int __pud_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long address);
+#endif
+
+#ifdef __PAGETABLE_PMD_FOLDED
+static inline int __pmd_alloc(struct mm_struct *mm, pud_t *pud,
+						unsigned long address)
+{
+	return 0;
+}
+#else
+int __pmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long address);
+#endif
+
+int __pte_alloc(struct mm_struct *mm, struct vm_area_struct *vma,
+		pmd_t *pmd, unsigned long address);
+int __pte_alloc_kernel(pmd_t *pmd, unsigned long address);
+
+/*
+ * The following ifdef needed to get the 4level-fixup.h header to work.
+ * Remove it when 4level-fixup.h has been removed.
+ */
+#if defined(CONFIG_MMU) && !defined(__ARCH_HAS_4LEVEL_HACK)
+static inline pud_t *pud_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long address)
+{
+	return (unlikely(pgd_none(*pgd)) && __pud_alloc(mm, pgd, address))?
+		NULL: pud_offset(pgd, address);
+}
+
+static inline pmd_t *pmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long address)
+{
+	return (unlikely(pud_none(*pud)) && __pmd_alloc(mm, pud, address))?
+		NULL: pmd_offset(pud, address);
+}
+#endif /* CONFIG_MMU && !__ARCH_HAS_4LEVEL_HACK */
+
+#if USE_SPLIT_PTLOCKS
+/*
+ * We tuck a spinlock to guard each pagetable page into its struct page,
+ * at page->private, with BUILD_BUG_ON to make sure that this will not
+ * overflow into the next struct page (as it might with DEBUG_SPINLOCK).
+ * When freeing, reset page->mapping so free_pages_check won't complain.
+ */
+#define __pte_lockptr(page)	&((page)->ptl)
+#define pte_lock_init(_page)	do {					\
+	spin_lock_init(__pte_lockptr(_page));				\
+} while (0)
+#define pte_lock_deinit(page)	((page)->mapping = NULL)
+#define pte_lockptr(mm, pmd)	({(void)(mm); __pte_lockptr(pmd_page(*(pmd)));})
+#else	/* !USE_SPLIT_PTLOCKS */
+/*
+ * We use mm->page_table_lock to guard all pagetable pages of the mm.
+ */
+#define pte_lock_init(page)	do {} while (0)
+#define pte_lock_deinit(page)	do {} while (0)
+#define pte_lockptr(mm, pmd)	({(void)(pmd); &(mm)->page_table_lock;})
+#endif /* USE_SPLIT_PTLOCKS */
+
+static inline void pgtable_page_ctor(struct page *page)
+{
+	pte_lock_init(page);
+	inc_zone_page_state(page, NR_PAGETABLE);
+}
+
+static inline void pgtable_page_dtor(struct page *page)
+{
+	pte_lock_deinit(page);
+	dec_zone_page_state(page, NR_PAGETABLE);
+}
+
+#define pte_offset_map_lock(mm, pmd, address, ptlp)	\
+({							\
+	spinlock_t *__ptl = pte_lockptr(mm, pmd);	\
+	pte_t *__pte = pte_offset_map(pmd, address);	\
+	*(ptlp) = __ptl;				\
+	spin_lock(__ptl);				\
+	__pte;						\
+})
+
+#define pte_unmap_unlock(pte, ptl)	do {		\
+	spin_unlock(ptl);				\
+	pte_unmap(pte);					\
+} while (0)
+
+#define pte_alloc_map(mm, vma, pmd, address)				\
+	((unlikely(pmd_none(*(pmd))) && __pte_alloc(mm, vma,	\
+							pmd, address))?	\
+	 NULL: pte_offset_map(pmd, address))
+
+#define pte_alloc_map_lock(mm, pmd, address, ptlp)	\
+	((unlikely(pmd_none(*(pmd))) && __pte_alloc(mm, NULL,	\
+							pmd, address))?	\
+		NULL: pte_offset_map_lock(mm, pmd, address, ptlp))
+
+#define pte_alloc_kernel(pmd, address)			\
+	((unlikely(pmd_none(*(pmd))) && __pte_alloc_kernel(pmd, address))? \
+		NULL: pte_offset_kernel(pmd, address))
+
+extern void free_area_init(unsigned long * zones_size);
+extern void free_area_init_node(int nid, unsigned long * zones_size,
+		unsigned long zone_start_pfn, unsigned long *zholes_size);
+extern void free_initmem(void);
+
+#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
+/*
+ * With CONFIG_HAVE_MEMBLOCK_NODE_MAP set, an architecture may initialise its
+ * zones, allocate the backing mem_map and account for memory holes in a more
+ * architecture independent manner. This is a substitute for creating the
+ * zone_sizes[] and zholes_size[] arrays and passing them to
+ * free_area_init_node()
+ *
+ * An architecture is expected to register range of page frames backed by
+ * physical memory with memblock_add[_node]() before calling
+ * free_area_init_nodes() passing in the PFN each zone ends at. At a basic
+ * usage, an architecture is expected to do something like
+ *
+ * unsigned long max_zone_pfns[MAX_NR_ZONES] = {max_dma, max_normal_pfn,
+ * 							 max_highmem_pfn};
+ * for_each_valid_physical_page_range()
+ * 	memblock_add_node(base, size, nid)
+ * free_area_init_nodes(max_zone_pfns);
+ *
+ * free_bootmem_with_active_regions() calls free_bootmem_node() for each
+ * registered physical page range.  Similarly
+ * sparse_memory_present_with_active_regions() calls memory_present() for
+ * each range when SPARSEMEM is enabled.
+ *
+ * See mm/page_alloc.c for more information on each function exposed by
+ * CONFIG_HAVE_MEMBLOCK_NODE_MAP.
+ */
+extern void free_area_init_nodes(unsigned long *max_zone_pfn);
+unsigned long node_map_pfn_alignment(void);
+unsigned long __absent_pages_in_range(int nid, unsigned long start_pfn,
+						unsigned long end_pfn);
+extern unsigned long absent_pages_in_range(unsigned long start_pfn,
+						unsigned long end_pfn);
+extern void get_pfn_range_for_nid(unsigned int nid,
+			unsigned long *start_pfn, unsigned long *end_pfn);
+extern unsigned long find_min_pfn_with_active_regions(void);
+extern void free_bootmem_with_active_regions(int nid,
+						unsigned long max_low_pfn);
+extern void sparse_memory_present_with_active_regions(int nid);
+
+#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
+
+#if !defined(CONFIG_HAVE_MEMBLOCK_NODE_MAP) && \
+    !defined(CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID)
+static inline int __early_pfn_to_nid(unsigned long pfn)
+{
+	return 0;
+}
+#else
+/* please see mm/page_alloc.c */
+extern int __meminit early_pfn_to_nid(unsigned long pfn);
+#ifdef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
+/* there is a per-arch backend function. */
+extern int __meminit __early_pfn_to_nid(unsigned long pfn);
+#endif /* CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID */
+#endif
+
+extern void set_dma_reserve(unsigned long new_dma_reserve);
+extern void memmap_init_zone(unsigned long, int, unsigned long,
+				unsigned long, enum memmap_context);
+extern void setup_per_zone_wmarks(void);
+extern int __meminit init_per_zone_wmark_min(void);
+extern void mem_init(void);
+extern void __init mmap_init(void);
+extern void show_mem(unsigned int flags);
+extern void si_meminfo(struct sysinfo * val);
+extern void si_meminfo_node(struct sysinfo *val, int nid);
+extern int after_bootmem;
+
+extern __printf(3, 4)
+void warn_alloc_failed(gfp_t gfp_mask, int order, const char *fmt, ...);
+
+extern void setup_per_cpu_pageset(void);
+
+extern void zone_pcp_update(struct zone *zone);
+
+/* nommu.c */
+extern atomic_long_t mmap_pages_allocated;
+extern int nommu_shrink_inode_mappings(struct inode *, size_t, size_t);
+
+/* prio_tree.c */
+void vma_prio_tree_add(struct vm_area_struct *, struct vm_area_struct *old);
+void vma_prio_tree_insert(struct vm_area_struct *, struct prio_tree_root *);
+void vma_prio_tree_remove(struct vm_area_struct *, struct prio_tree_root *);
+struct vm_area_struct *vma_prio_tree_next(struct vm_area_struct *vma,
+	struct prio_tree_iter *iter);
+
+#define vma_prio_tree_foreach(vma, iter, root, begin, end)	\
+	for (prio_tree_iter_init(iter, root, begin, end), vma = NULL;	\
+		(vma = vma_prio_tree_next(vma, iter)); )
+
+static inline void vma_nonlinear_insert(struct vm_area_struct *vma,
+					struct list_head *list)
+{
+	vma->shared.vm_set.parent = NULL;
+	list_add_tail(&vma->shared.vm_set.list, list);
+}
+
+/* mmap.c */
+extern int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin);
+extern int vma_adjust(struct vm_area_struct *vma, unsigned long start,
+	unsigned long end, pgoff_t pgoff, struct vm_area_struct *insert);
+extern struct vm_area_struct *vma_merge(struct mm_struct *,
+	struct vm_area_struct *prev, unsigned long addr, unsigned long end,
+	unsigned long vm_flags, struct anon_vma *, struct file *, pgoff_t,
+	struct mempolicy *);
+extern struct anon_vma *find_mergeable_anon_vma(struct vm_area_struct *);
+extern int split_vma(struct mm_struct *,
+	struct vm_area_struct *, unsigned long addr, int new_below);
+extern int insert_vm_struct(struct mm_struct *, struct vm_area_struct *);
+extern void __vma_link_rb(struct mm_struct *, struct vm_area_struct *,
+	struct rb_node **, struct rb_node *);
+extern void unlink_file_vma(struct vm_area_struct *);
+extern struct vm_area_struct *copy_vma(struct vm_area_struct **,
+	unsigned long addr, unsigned long len, pgoff_t pgoff);
+extern void exit_mmap(struct mm_struct *);
+
+extern int mm_take_all_locks(struct mm_struct *mm);
+extern void mm_drop_all_locks(struct mm_struct *mm);
+
+/* From fs/proc/base.c. callers must _not_ hold the mm's exe_file_lock */
+extern void added_exe_file_vma(struct mm_struct *mm);
+extern void removed_exe_file_vma(struct mm_struct *mm);
+extern void set_mm_exe_file(struct mm_struct *mm, struct file *new_exe_file);
+extern struct file *get_mm_exe_file(struct mm_struct *mm);
+
+extern int may_expand_vm(struct mm_struct *mm, unsigned long npages);
+extern int install_special_mapping(struct mm_struct *mm,
+				   unsigned long addr, unsigned long len,
+				   unsigned long flags, struct page **pages);
+
+extern unsigned long get_unmapped_area(struct file *, unsigned long, unsigned long, unsigned long, unsigned long);
+
+extern unsigned long mmap_region(struct file *file, unsigned long addr,
+	unsigned long len, unsigned long flags,
+	vm_flags_t vm_flags, unsigned long pgoff);
+extern unsigned long do_mmap(struct file *, unsigned long,
+        unsigned long, unsigned long,
+        unsigned long, unsigned long);
+extern int do_munmap(struct mm_struct *, unsigned long, size_t);
+
+/* These take the mm semaphore themselves */
+extern unsigned long vm_brk(unsigned long, unsigned long);
+extern int vm_munmap(unsigned long, size_t);
+extern unsigned long vm_mmap(struct file *, unsigned long,
+        unsigned long, unsigned long,
+        unsigned long, unsigned long);
+
+/* truncate.c */
+extern void truncate_inode_pages(struct address_space *, loff_t);
+extern void truncate_inode_pages_range(struct address_space *,
+				       loff_t lstart, loff_t lend);
+
+/* generic vm_area_ops exported for stackable file systems */
+extern int filemap_fault(struct vm_area_struct *, struct vm_fault *);
+
+/* mm/page-writeback.c */
+int write_one_page(struct page *page, int wait);
+void task_dirty_inc(struct task_struct *tsk);
+
+/* readahead.c */
+#define VM_MAX_READAHEAD	128	/* kbytes */
+#define VM_MIN_READAHEAD	16	/* kbytes (includes current page) */
+
+int force_page_cache_readahead(struct address_space *mapping, struct file *filp,
+			pgoff_t offset, unsigned long nr_to_read);
+
+void page_cache_sync_readahead(struct address_space *mapping,
+			       struct file_ra_state *ra,
+			       struct file *filp,
+			       pgoff_t offset,
+			       unsigned long size);
+
+void page_cache_async_readahead(struct address_space *mapping,
+				struct file_ra_state *ra,
+				struct file *filp,
+				struct page *pg,
+				pgoff_t offset,
+				unsigned long size);
+
+unsigned long max_sane_readahead(unsigned long nr);
+unsigned long ra_submit(struct file_ra_state *ra,
+			struct address_space *mapping,
+			struct file *filp);
+
+/* Generic expand stack which grows the stack according to GROWS{UP,DOWN} */
+extern int expand_stack(struct vm_area_struct *vma, unsigned long address);
+
+/* CONFIG_STACK_GROWSUP still needs to to grow downwards at some places */
+extern int expand_downwards(struct vm_area_struct *vma,
+		unsigned long address);
+#if VM_GROWSUP
+extern int expand_upwards(struct vm_area_struct *vma, unsigned long address);
+#else
+  #define expand_upwards(vma, address) do { } while (0)
+#endif
+
+/* Look up the first VMA which satisfies  addr < vm_end,  NULL if none. */
+extern struct vm_area_struct * find_vma(struct mm_struct * mm, unsigned long addr);
+extern struct vm_area_struct * find_vma_prev(struct mm_struct * mm, unsigned long addr,
+					     struct vm_area_struct **pprev);
+
+/* Look up the first VMA which intersects the interval start_addr..end_addr-1,
+   NULL if none.  Assume start_addr < end_addr. */
+static inline struct vm_area_struct * find_vma_intersection(struct mm_struct * mm, unsigned long start_addr, unsigned long end_addr)
+{
+	struct vm_area_struct * vma = find_vma(mm,start_addr);
+
+	if (vma && end_addr <= vma->vm_start)
+		vma = NULL;
+	return vma;
+}
+
+static inline unsigned long vma_pages(struct vm_area_struct *vma)
+{
+	return (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
+}
+
+/* Look up the first VMA which exactly match the interval vm_start ... vm_end */
+static inline struct vm_area_struct *find_exact_vma(struct mm_struct *mm,
+				unsigned long vm_start, unsigned long vm_end)
+{
+	struct vm_area_struct *vma = find_vma(mm, vm_start);
+
+	if (vma && (vma->vm_start != vm_start || vma->vm_end != vm_end))
+		vma = NULL;
+
+	return vma;
+}
+
+#ifdef CONFIG_MMU
+pgprot_t vm_get_page_prot(unsigned long vm_flags);
+#else
+static inline pgprot_t vm_get_page_prot(unsigned long vm_flags)
+{
+	return __pgprot(0);
+}
+#endif
+
+struct vm_area_struct *find_extend_vma(struct mm_struct *, unsigned long addr);
+int remap_pfn_range(struct vm_area_struct *, unsigned long addr,
+			unsigned long pfn, unsigned long size, pgprot_t);
+int vm_insert_page(struct vm_area_struct *, unsigned long addr, struct page *);
+int vm_insert_pfn(struct vm_area_struct *vma, unsigned long addr,
+			unsigned long pfn);
+int vm_insert_mixed(struct vm_area_struct *vma, unsigned long addr,
+			unsigned long pfn);
+
+struct page *follow_page(struct vm_area_struct *, unsigned long address,
+			unsigned int foll_flags);
+#define FOLL_WRITE	0x01	/* check pte is writable */
+#define FOLL_TOUCH	0x02	/* mark page accessed */
+#define FOLL_GET	0x04	/* do get_page on page */
+#define FOLL_DUMP	0x08	/* give error on hole if it would be zero */
+#define FOLL_FORCE	0x10	/* get_user_pages read/write w/o permission */
+#define FOLL_NOWAIT	0x20	/* if a disk transfer is needed, start the IO
+				 * and return without waiting upon it */
+#define FOLL_MLOCK	0x40	/* mark page as mlocked */
+#define FOLL_SPLIT	0x80	/* don't return transhuge pages, split them */
+#define FOLL_HWPOISON	0x100	/* check page is hwpoisoned */
+
+typedef int (*pte_fn_t)(pte_t *pte, pgtable_t token, unsigned long addr,
+			void *data);
+extern int apply_to_page_range(struct mm_struct *mm, unsigned long address,
+			       unsigned long size, pte_fn_t fn, void *data);
+
+#ifdef CONFIG_PROC_FS
+void vm_stat_account(struct mm_struct *, unsigned long, struct file *, long);
+#else
+static inline void vm_stat_account(struct mm_struct *mm,
+			unsigned long flags, struct file *file, long pages)
+{
+}
+#endif /* CONFIG_PROC_FS */
+
+#ifdef CONFIG_DEBUG_PAGEALLOC
+extern void kernel_map_pages(struct page *page, int numpages, int enable);
+#ifdef CONFIG_HIBERNATION
+extern bool kernel_page_present(struct page *page);
+#endif /* CONFIG_HIBERNATION */
+#else
+static inline void
+kernel_map_pages(struct page *page, int numpages, int enable) {}
+#ifdef CONFIG_HIBERNATION
+static inline bool kernel_page_present(struct page *page) { return true; }
+#endif /* CONFIG_HIBERNATION */
+#endif
+
+extern struct vm_area_struct *get_gate_vma(struct mm_struct *mm);
+#ifdef	__HAVE_ARCH_GATE_AREA
+int in_gate_area_no_mm(unsigned long addr);
+int in_gate_area(struct mm_struct *mm, unsigned long addr);
+#else
+int in_gate_area_no_mm(unsigned long addr);
+#define in_gate_area(mm, addr) ({(void)mm; in_gate_area_no_mm(addr);})
+#endif	/* __HAVE_ARCH_GATE_AREA */
+
+int drop_caches_sysctl_handler(struct ctl_table *, int,
+					void __user *, size_t *, loff_t *);
+unsigned long shrink_slab(struct shrink_control *shrink,
+			  unsigned long nr_pages_scanned,
+			  unsigned long lru_pages);
+
+#ifndef CONFIG_MMU
+#define randomize_va_space 0
+#else
+extern int randomize_va_space;
+#endif
+
+const char * arch_vma_name(struct vm_area_struct *vma);
+void print_vma_addr(char *prefix, unsigned long rip);
+
+void sparse_mem_maps_populate_node(struct page **map_map,
+				   unsigned long pnum_begin,
+				   unsigned long pnum_end,
+				   unsigned long map_count,
+				   int nodeid);
+
+struct page *sparse_mem_map_populate(unsigned long pnum, int nid);
+pgd_t *vmemmap_pgd_populate(unsigned long addr, int node);
+pud_t *vmemmap_pud_populate(pgd_t *pgd, unsigned long addr, int node);
+pmd_t *vmemmap_pmd_populate(pud_t *pud, unsigned long addr, int node);
+pte_t *vmemmap_pte_populate(pmd_t *pmd, unsigned long addr, int node);
+void *vmemmap_alloc_block(unsigned long size, int node);
+void *vmemmap_alloc_block_buf(unsigned long size, int node);
+void vmemmap_verify(pte_t *, int, unsigned long, unsigned long);
+int vmemmap_populate_basepages(struct page *start_page,
+						unsigned long pages, int node);
+int vmemmap_populate(struct page *start_page, unsigned long pages, int node);
+void vmemmap_populate_print_last(void);
+
+
+enum mf_flags {
+	MF_COUNT_INCREASED = 1 << 0,
+	MF_ACTION_REQUIRED = 1 << 1,
+};
+extern int memory_failure(unsigned long pfn, int trapno, int flags);
+extern void memory_failure_queue(unsigned long pfn, int trapno, int flags);
+extern int unpoison_memory(unsigned long pfn);
+extern int sysctl_memory_failure_early_kill;
+extern int sysctl_memory_failure_recovery;
+extern void shake_page(struct page *p, int access);
+extern atomic_long_t mce_bad_pages;
+extern int soft_offline_page(struct page *page, int flags);
+
+extern void dump_page(struct page *page);
+
+#if defined(CONFIG_TRANSPARENT_HUGEPAGE) || defined(CONFIG_HUGETLBFS)
+extern void clear_huge_page(struct page *page,
+			    unsigned long addr,
+			    unsigned int pages_per_huge_page);
+extern void copy_user_huge_page(struct page *dst, struct page *src,
+				unsigned long addr, struct vm_area_struct *vma,
+				unsigned int pages_per_huge_page);
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE || CONFIG_HUGETLBFS */
+
+#ifdef CONFIG_DEBUG_PAGEALLOC
+extern unsigned int _debug_guardpage_minorder;
+
+static inline unsigned int debug_guardpage_minorder(void)
+{
+	return _debug_guardpage_minorder;
+}
+
+static inline bool page_is_guard(struct page *page)
+{
+	return test_bit(PAGE_DEBUG_FLAG_GUARD, &page->debug_flags);
+}
+#else
+static inline unsigned int debug_guardpage_minorder(void) { return 0; }
+static inline bool page_is_guard(struct page *page) { return false; }
+#endif /* CONFIG_DEBUG_PAGEALLOC */
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_MM_H */
diff --git a/include/linux/mm_inline.h b/include/linux/mm_inline.h
new file mode 100644
index 00000000..227fd3e9
--- /dev/null
+++ b/include/linux/mm_inline.h
@@ -0,0 +1,102 @@
+#ifndef LINUX_MM_INLINE_H
+#define LINUX_MM_INLINE_H
+
+#include <linux/huge_mm.h>
+
+/**
+ * page_is_file_cache - should the page be on a file LRU or anon LRU?
+ * @page: the page to test
+ *
+ * Returns 1 if @page is page cache page backed by a regular filesystem,
+ * or 0 if @page is anonymous, tmpfs or otherwise ram or swap backed.
+ * Used by functions that manipulate the LRU lists, to sort a page
+ * onto the right LRU list.
+ *
+ * We would like to get this info without a page flag, but the state
+ * needs to survive until the page is last deleted from the LRU, which
+ * could be as far down as __page_cache_release.
+ */
+static inline int page_is_file_cache(struct page *page)
+{
+	return !PageSwapBacked(page);
+}
+
+static inline void
+add_page_to_lru_list(struct zone *zone, struct page *page, enum lru_list lru)
+{
+	struct lruvec *lruvec;
+
+	lruvec = mem_cgroup_lru_add_list(zone, page, lru);
+	list_add(&page->lru, &lruvec->lists[lru]);
+	__mod_zone_page_state(zone, NR_LRU_BASE + lru, hpage_nr_pages(page));
+}
+
+static inline void
+del_page_from_lru_list(struct zone *zone, struct page *page, enum lru_list lru)
+{
+	mem_cgroup_lru_del_list(page, lru);
+	list_del(&page->lru);
+	__mod_zone_page_state(zone, NR_LRU_BASE + lru, -hpage_nr_pages(page));
+}
+
+/**
+ * page_lru_base_type - which LRU list type should a page be on?
+ * @page: the page to test
+ *
+ * Used for LRU list index arithmetic.
+ *
+ * Returns the base LRU type - file or anon - @page should be on.
+ */
+static inline enum lru_list page_lru_base_type(struct page *page)
+{
+	if (page_is_file_cache(page))
+		return LRU_INACTIVE_FILE;
+	return LRU_INACTIVE_ANON;
+}
+
+/**
+ * page_off_lru - which LRU list was page on? clearing its lru flags.
+ * @page: the page to test
+ *
+ * Returns the LRU list a page was on, as an index into the array of LRU
+ * lists; and clears its Unevictable or Active flags, ready for freeing.
+ */
+static inline enum lru_list page_off_lru(struct page *page)
+{
+	enum lru_list lru;
+
+	if (PageUnevictable(page)) {
+		__ClearPageUnevictable(page);
+		lru = LRU_UNEVICTABLE;
+	} else {
+		lru = page_lru_base_type(page);
+		if (PageActive(page)) {
+			__ClearPageActive(page);
+			lru += LRU_ACTIVE;
+		}
+	}
+	return lru;
+}
+
+/**
+ * page_lru - which LRU list should a page be on?
+ * @page: the page to test
+ *
+ * Returns the LRU list a page should be on, as an index
+ * into the array of LRU lists.
+ */
+static inline enum lru_list page_lru(struct page *page)
+{
+	enum lru_list lru;
+
+	if (PageUnevictable(page))
+		lru = LRU_UNEVICTABLE;
+	else {
+		lru = page_lru_base_type(page);
+		if (PageActive(page))
+			lru += LRU_ACTIVE;
+	}
+	return lru;
+}
+
+#endif
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
new file mode 100644
index 00000000..b35752fb
--- /dev/null
+++ b/include/linux/mm_types.h
@@ -0,0 +1,416 @@
+#ifndef _LINUX_MM_TYPES_H
+#define _LINUX_MM_TYPES_H
+
+#include <linux/auxvec.h>
+#include <linux/types.h>
+#include <linux/threads.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/prio_tree.h>
+#include <linux/rbtree.h>
+#include <linux/rwsem.h>
+#include <linux/completion.h>
+#include <linux/cpumask.h>
+#include <linux/page-debug-flags.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+
+#ifndef AT_VECTOR_SIZE_ARCH
+#define AT_VECTOR_SIZE_ARCH 0
+#endif
+#define AT_VECTOR_SIZE (2*(AT_VECTOR_SIZE_ARCH + AT_VECTOR_SIZE_BASE + 1))
+
+struct address_space;
+
+#define USE_SPLIT_PTLOCKS	(NR_CPUS >= CONFIG_SPLIT_PTLOCK_CPUS)
+
+/*
+ * Each physical page in the system has a struct page associated with
+ * it to keep track of whatever it is we are using the page for at the
+ * moment. Note that we have no way to track which tasks are using
+ * a page, though if it is a pagecache page, rmap structures can tell us
+ * who is mapping it.
+ *
+ * The objects in struct page are organized in double word blocks in
+ * order to allows us to use atomic double word operations on portions
+ * of struct page. That is currently only used by slub but the arrangement
+ * allows the use of atomic double word operations on the flags/mapping
+ * and lru list pointers also.
+ */
+struct page {
+	/* First double word block */
+	unsigned long flags;		/* Atomic flags, some possibly
+					 * updated asynchronously */
+	struct address_space *mapping;	/* If low bit clear, points to
+					 * inode address_space, or NULL.
+					 * If page mapped as anonymous
+					 * memory, low bit is set, and
+					 * it points to anon_vma object:
+					 * see PAGE_MAPPING_ANON below.
+					 */
+	/* Second double word */
+	struct {
+		union {
+			pgoff_t index;		/* Our offset within mapping. */
+			void *freelist;		/* slub first free object */
+		};
+
+		union {
+#if defined(CONFIG_HAVE_CMPXCHG_DOUBLE) && \
+	defined(CONFIG_HAVE_ALIGNED_STRUCT_PAGE)
+			/* Used for cmpxchg_double in slub */
+			unsigned long counters;
+#else
+			/*
+			 * Keep _count separate from slub cmpxchg_double data.
+			 * As the rest of the double word is protected by
+			 * slab_lock but _count is not.
+			 */
+			unsigned counters;
+#endif
+
+			struct {
+
+				union {
+					/*
+					 * Count of ptes mapped in
+					 * mms, to show when page is
+					 * mapped & limit reverse map
+					 * searches.
+					 *
+					 * Used also for tail pages
+					 * refcounting instead of
+					 * _count. Tail pages cannot
+					 * be mapped and keeping the
+					 * tail page _count zero at
+					 * all times guarantees
+					 * get_page_unless_zero() will
+					 * never succeed on tail
+					 * pages.
+					 */
+					atomic_t _mapcount;
+
+					struct {
+						unsigned inuse:16;
+						unsigned objects:15;
+						unsigned frozen:1;
+					};
+				};
+				atomic_t _count;		/* Usage count, see below. */
+			};
+		};
+	};
+
+	/* Third double word block */
+	union {
+		struct list_head lru;	/* Pageout list, eg. active_list
+					 * protected by zone->lru_lock !
+					 */
+		struct {		/* slub per cpu partial pages */
+			struct page *next;	/* Next partial slab */
+#ifdef CONFIG_64BIT
+			int pages;	/* Nr of partial slabs left */
+			int pobjects;	/* Approximate # of objects */
+#else
+			short int pages;
+			short int pobjects;
+#endif
+		};
+	};
+
+	/* Remainder is not double word aligned */
+	union {
+		unsigned long private;		/* Mapping-private opaque data:
+					 	 * usually used for buffer_heads
+						 * if PagePrivate set; used for
+						 * swp_entry_t if PageSwapCache;
+						 * indicates order in the buddy
+						 * system if PG_buddy is set.
+						 */
+#if USE_SPLIT_PTLOCKS
+		spinlock_t ptl;
+#endif
+		struct kmem_cache *slab;	/* SLUB: Pointer to slab */
+		struct page *first_page;	/* Compound tail pages */
+	};
+
+	/*
+	 * On machines where all RAM is mapped into kernel address space,
+	 * we can simply calculate the virtual address. On machines with
+	 * highmem some memory is mapped into kernel virtual memory
+	 * dynamically, so we need a place to store that address.
+	 * Note that this field could be 16 bits on x86 ... ;)
+	 *
+	 * Architectures with slow multiplication can define
+	 * WANT_PAGE_VIRTUAL in asm/page.h
+	 */
+#if defined(WANT_PAGE_VIRTUAL)
+	void *virtual;			/* Kernel virtual address (NULL if
+					   not kmapped, ie. highmem) */
+#endif /* WANT_PAGE_VIRTUAL */
+#ifdef CONFIG_WANT_PAGE_DEBUG_FLAGS
+	unsigned long debug_flags;	/* Use atomic bitops on this */
+#endif
+
+#ifdef CONFIG_KMEMCHECK
+	/*
+	 * kmemcheck wants to track the status of each byte in a page; this
+	 * is a pointer to such a status block. NULL if not tracked.
+	 */
+	void *shadow;
+#endif
+}
+/*
+ * The struct page can be forced to be double word aligned so that atomic ops
+ * on double words work. The SLUB allocator can make use of such a feature.
+ */
+#ifdef CONFIG_HAVE_ALIGNED_STRUCT_PAGE
+	__aligned(2 * sizeof(unsigned long))
+#endif
+;
+
+struct page_frag {
+	struct page *page;
+#if (BITS_PER_LONG > 32) || (PAGE_SIZE >= 65536)
+	__u32 offset;
+	__u32 size;
+#else
+	__u16 offset;
+	__u16 size;
+#endif
+};
+
+typedef unsigned long __nocast vm_flags_t;
+
+/*
+ * A region containing a mapping of a non-memory backed file under NOMMU
+ * conditions.  These are held in a global tree and are pinned by the VMAs that
+ * map parts of them.
+ */
+struct vm_region {
+	struct rb_node	vm_rb;		/* link in global region tree */
+	vm_flags_t	vm_flags;	/* VMA vm_flags */
+	unsigned long	vm_start;	/* start address of region */
+	unsigned long	vm_end;		/* region initialised to here */
+	unsigned long	vm_top;		/* region allocated to here */
+	unsigned long	vm_pgoff;	/* the offset in vm_file corresponding to vm_start */
+	struct file	*vm_file;	/* the backing file or NULL */
+
+	int		vm_usage;	/* region usage count (access under nommu_region_sem) */
+	bool		vm_icache_flushed : 1; /* true if the icache has been flushed for
+						* this region */
+};
+
+/*
+ * This struct defines a memory VMM memory area. There is one of these
+ * per VM-area/task.  A VM area is any part of the process virtual memory
+ * space that has a special rule for the page-fault handlers (ie a shared
+ * library, the executable area etc).
+ */
+struct vm_area_struct {
+	struct mm_struct * vm_mm;	/* The address space we belong to. */
+	unsigned long vm_start;		/* Our start address within vm_mm. */
+	unsigned long vm_end;		/* The first byte after our end address
+					   within vm_mm. */
+
+	/* linked list of VM areas per task, sorted by address */
+	struct vm_area_struct *vm_next, *vm_prev;
+
+	pgprot_t vm_page_prot;		/* Access permissions of this VMA. */
+	unsigned long vm_flags;		/* Flags, see mm.h. */
+
+	struct rb_node vm_rb;
+
+	/*
+	 * For areas with an address space and backing store,
+	 * linkage into the address_space->i_mmap prio tree, or
+	 * linkage to the list of like vmas hanging off its node, or
+	 * linkage of vma in the address_space->i_mmap_nonlinear list.
+	 */
+	union {
+		struct {
+			struct list_head list;
+			void *parent;	/* aligns with prio_tree_node parent */
+			struct vm_area_struct *head;
+		} vm_set;
+
+		struct raw_prio_tree_node prio_tree_node;
+	} shared;
+
+	/*
+	 * A file's MAP_PRIVATE vma can be in both i_mmap tree and anon_vma
+	 * list, after a COW of one of the file pages.	A MAP_SHARED vma
+	 * can only be in the i_mmap tree.  An anonymous MAP_PRIVATE, stack
+	 * or brk vma (with NULL file) can only be in an anon_vma list.
+	 */
+	struct list_head anon_vma_chain; /* Serialized by mmap_sem &
+					  * page_table_lock */
+	struct anon_vma *anon_vma;	/* Serialized by page_table_lock */
+
+	/* Function pointers to deal with this struct. */
+	const struct vm_operations_struct *vm_ops;
+
+	/* Information about our backing store: */
+	unsigned long vm_pgoff;		/* Offset (within vm_file) in PAGE_SIZE
+					   units, *not* PAGE_CACHE_SIZE */
+	struct file * vm_file;		/* File we map to (can be NULL). */
+	void * vm_private_data;		/* was vm_pte (shared mem) */
+
+#ifndef CONFIG_MMU
+	struct vm_region *vm_region;	/* NOMMU mapping region */
+#endif
+#ifdef CONFIG_NUMA
+	struct mempolicy *vm_policy;	/* NUMA policy for the VMA */
+#endif
+};
+
+struct core_thread {
+	struct task_struct *task;
+	struct core_thread *next;
+};
+
+struct core_state {
+	atomic_t nr_threads;
+	struct core_thread dumper;
+	struct completion startup;
+};
+
+enum {
+	MM_FILEPAGES,
+	MM_ANONPAGES,
+	MM_SWAPENTS,
+	NR_MM_COUNTERS
+};
+
+#if USE_SPLIT_PTLOCKS && defined(CONFIG_MMU)
+#define SPLIT_RSS_COUNTING
+/* per-thread cached information, */
+struct task_rss_stat {
+	int events;	/* for synchronization threshold */
+	int count[NR_MM_COUNTERS];
+};
+#endif /* USE_SPLIT_PTLOCKS */
+
+struct mm_rss_stat {
+	atomic_long_t count[NR_MM_COUNTERS];
+};
+
+struct mm_struct {
+	struct vm_area_struct * mmap;		/* list of VMAs */
+	struct rb_root mm_rb;
+	struct vm_area_struct * mmap_cache;	/* last find_vma result */
+#ifdef CONFIG_MMU
+	unsigned long (*get_unmapped_area) (struct file *filp,
+				unsigned long addr, unsigned long len,
+				unsigned long pgoff, unsigned long flags);
+	void (*unmap_area) (struct mm_struct *mm, unsigned long addr);
+#endif
+	unsigned long mmap_base;		/* base of mmap area */
+	unsigned long task_size;		/* size of task vm space */
+	unsigned long cached_hole_size; 	/* if non-zero, the largest hole below free_area_cache */
+	unsigned long free_area_cache;		/* first hole of size cached_hole_size or larger */
+	pgd_t * pgd;
+	atomic_t mm_users;			/* How many users with user space? */
+	atomic_t mm_count;			/* How many references to "struct mm_struct" (users count as 1) */
+	int map_count;				/* number of VMAs */
+
+	spinlock_t page_table_lock;		/* Protects page tables and some counters */
+	struct rw_semaphore mmap_sem;
+
+	struct list_head mmlist;		/* List of maybe swapped mm's.	These are globally strung
+						 * together off init_mm.mmlist, and are protected
+						 * by mmlist_lock
+						 */
+
+
+	unsigned long hiwater_rss;	/* High-watermark of RSS usage */
+	unsigned long hiwater_vm;	/* High-water virtual memory usage */
+
+	unsigned long total_vm;		/* Total pages mapped */
+	unsigned long locked_vm;	/* Pages that have PG_mlocked set */
+	unsigned long pinned_vm;	/* Refcount permanently increased */
+	unsigned long shared_vm;	/* Shared pages (files) */
+	unsigned long exec_vm;		/* VM_EXEC & ~VM_WRITE */
+	unsigned long stack_vm;		/* VM_GROWSUP/DOWN */
+	unsigned long reserved_vm;	/* VM_RESERVED|VM_IO pages */
+	unsigned long def_flags;
+	unsigned long nr_ptes;		/* Page table pages */
+	unsigned long start_code, end_code, start_data, end_data;
+	unsigned long start_brk, brk, start_stack;
+	unsigned long arg_start, arg_end, env_start, env_end;
+
+	unsigned long saved_auxv[AT_VECTOR_SIZE]; /* for /proc/PID/auxv */
+
+	/*
+	 * Special counters, in some configurations protected by the
+	 * page_table_lock, in other configurations by being atomic.
+	 */
+	struct mm_rss_stat rss_stat;
+
+	struct linux_binfmt *binfmt;
+
+	cpumask_var_t cpu_vm_mask_var;
+
+	/* Architecture-specific MM context */
+	mm_context_t context;
+
+	/* Swap token stuff */
+	/*
+	 * Last value of global fault stamp as seen by this process.
+	 * In other words, this value gives an indication of how long
+	 * it has been since this task got the token.
+	 * Look at mm/thrash.c
+	 */
+	unsigned int faultstamp;
+	unsigned int token_priority;
+	unsigned int last_interval;
+
+	unsigned long flags; /* Must use atomic bitops to access the bits */
+
+	struct core_state *core_state; /* coredumping support */
+#ifdef CONFIG_AIO
+	spinlock_t		ioctx_lock;
+	struct hlist_head	ioctx_list;
+#endif
+#ifdef CONFIG_MM_OWNER
+	/*
+	 * "owner" points to a task that is regarded as the canonical
+	 * user/owner of this mm. All of the following must be true in
+	 * order for it to be changed:
+	 *
+	 * current == mm->owner
+	 * current->mm != mm
+	 * new_owner->mm == mm
+	 * new_owner->alloc_lock is held
+	 */
+	struct task_struct __rcu *owner;
+#endif
+
+	/* store ref to file /proc/<pid>/exe symlink points to */
+	struct file *exe_file;
+	unsigned long num_exe_file_vmas;
+#ifdef CONFIG_MMU_NOTIFIER
+	struct mmu_notifier_mm *mmu_notifier_mm;
+#endif
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+	pgtable_t pmd_huge_pte; /* protected by page_table_lock */
+#endif
+#ifdef CONFIG_CPUMASK_OFFSTACK
+	struct cpumask cpumask_allocation;
+#endif
+};
+
+static inline void mm_init_cpumask(struct mm_struct *mm)
+{
+#ifdef CONFIG_CPUMASK_OFFSTACK
+	mm->cpu_vm_mask_var = &mm->cpumask_allocation;
+#endif
+}
+
+/* Future-safe accessor for struct mm_struct's cpu_vm_mask. */
+static inline cpumask_t *mm_cpumask(struct mm_struct *mm)
+{
+	return mm->cpu_vm_mask_var;
+}
+
+#endif /* _LINUX_MM_TYPES_H */
diff --git a/include/linux/mman.h b/include/linux/mman.h
new file mode 100644
index 00000000..8b74e9b1
--- /dev/null
+++ b/include/linux/mman.h
@@ -0,0 +1,93 @@
+#ifndef _LINUX_MMAN_H
+#define _LINUX_MMAN_H
+
+#include <asm/mman.h>
+
+#define MREMAP_MAYMOVE	1
+#define MREMAP_FIXED	2
+
+#define OVERCOMMIT_GUESS		0
+#define OVERCOMMIT_ALWAYS		1
+#define OVERCOMMIT_NEVER		2
+
+#ifdef __KERNEL__
+#include <linux/mm.h>
+#include <linux/percpu_counter.h>
+
+#include <linux/atomic.h>
+
+extern int sysctl_overcommit_memory;
+extern int sysctl_overcommit_ratio;
+extern struct percpu_counter vm_committed_as;
+
+static inline void vm_acct_memory(long pages)
+{
+	percpu_counter_add(&vm_committed_as, pages);
+}
+
+static inline void vm_unacct_memory(long pages)
+{
+	vm_acct_memory(-pages);
+}
+
+/*
+ * Allow architectures to handle additional protection bits
+ */
+
+#ifndef arch_calc_vm_prot_bits
+#define arch_calc_vm_prot_bits(prot) 0
+#endif
+
+#ifndef arch_vm_get_page_prot
+#define arch_vm_get_page_prot(vm_flags) __pgprot(0)
+#endif
+
+#ifndef arch_validate_prot
+/*
+ * This is called from mprotect().  PROT_GROWSDOWN and PROT_GROWSUP have
+ * already been masked out.
+ *
+ * Returns true if the prot flags are valid
+ */
+static inline int arch_validate_prot(unsigned long prot)
+{
+	return (prot & ~(PROT_READ | PROT_WRITE | PROT_EXEC | PROT_SEM)) == 0;
+}
+#define arch_validate_prot arch_validate_prot
+#endif
+
+/*
+ * Optimisation macro.  It is equivalent to:
+ *      (x & bit1) ? bit2 : 0
+ * but this version is faster.
+ * ("bit1" and "bit2" must be single bits)
+ */
+#define _calc_vm_trans(x, bit1, bit2) \
+  ((bit1) <= (bit2) ? ((x) & (bit1)) * ((bit2) / (bit1)) \
+   : ((x) & (bit1)) / ((bit1) / (bit2)))
+
+/*
+ * Combine the mmap "prot" argument into "vm_flags" used internally.
+ */
+static inline unsigned long
+calc_vm_prot_bits(unsigned long prot)
+{
+	return _calc_vm_trans(prot, PROT_READ,  VM_READ ) |
+	       _calc_vm_trans(prot, PROT_WRITE, VM_WRITE) |
+	       _calc_vm_trans(prot, PROT_EXEC,  VM_EXEC) |
+	       arch_calc_vm_prot_bits(prot);
+}
+
+/*
+ * Combine the mmap "flags" argument into "vm_flags" used internally.
+ */
+static inline unsigned long
+calc_vm_flag_bits(unsigned long flags)
+{
+	return _calc_vm_trans(flags, MAP_GROWSDOWN,  VM_GROWSDOWN ) |
+	       _calc_vm_trans(flags, MAP_DENYWRITE,  VM_DENYWRITE ) |
+	       _calc_vm_trans(flags, MAP_EXECUTABLE, VM_EXECUTABLE) |
+	       _calc_vm_trans(flags, MAP_LOCKED,     VM_LOCKED    );
+}
+#endif /* __KERNEL__ */
+#endif /* _LINUX_MMAN_H */
diff --git a/include/linux/mmc/Kbuild b/include/linux/mmc/Kbuild
new file mode 100644
index 00000000..1fb26448
--- /dev/null
+++ b/include/linux/mmc/Kbuild
@@ -0,0 +1 @@
+header-y += ioctl.h
diff --git a/include/linux/mmc/boot.h b/include/linux/mmc/boot.h
new file mode 100644
index 00000000..23acc3ba
--- /dev/null
+++ b/include/linux/mmc/boot.h
@@ -0,0 +1,7 @@
+#ifndef LINUX_MMC_BOOT_H
+#define LINUX_MMC_BOOT_H
+
+enum { MMC_PROGRESS_ENTER, MMC_PROGRESS_INIT,
+       MMC_PROGRESS_LOAD, MMC_PROGRESS_DONE };
+
+#endif /* LINUX_MMC_BOOT_H */
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
new file mode 100644
index 00000000..629b823f
--- /dev/null
+++ b/include/linux/mmc/card.h
@@ -0,0 +1,494 @@
+/*
+ *  linux/include/linux/mmc/card.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Card driver specific definitions.
+ */
+#ifndef LINUX_MMC_CARD_H
+#define LINUX_MMC_CARD_H
+
+#include <linux/device.h>
+#include <linux/mmc/core.h>
+#include <linux/mod_devicetable.h>
+
+struct mmc_cid {
+	unsigned int		manfid;
+	char			prod_name[8];
+	unsigned int		serial;
+	unsigned short		oemid;
+	unsigned short		year;
+	unsigned char		hwrev;
+	unsigned char		fwrev;
+	unsigned char		month;
+};
+
+struct mmc_csd {
+	unsigned char		structure;
+	unsigned char		mmca_vsn;
+	unsigned short		cmdclass;
+	unsigned short		tacc_clks;
+	unsigned int		tacc_ns;
+	unsigned int		c_size;
+	unsigned int		r2w_factor;
+	unsigned int		max_dtr;
+	unsigned int		erase_size;		/* In sectors */
+	unsigned int		read_blkbits;
+	unsigned int		write_blkbits;
+	unsigned int		capacity;
+	unsigned int		read_partial:1,
+				read_misalign:1,
+				write_partial:1,
+				write_misalign:1;
+};
+
+struct mmc_ext_csd {
+	u8			rev;
+	u8			erase_group_def;
+	u8			sec_feature_support;
+	u8			rel_sectors;
+	u8			rel_param;
+	u8			part_config;
+	u8			cache_ctrl;
+	u8			rst_n_function;
+	unsigned int		part_time;		/* Units: ms */
+	unsigned int		sa_timeout;		/* Units: 100ns */
+	unsigned int		generic_cmd6_time;	/* Units: 10ms */
+	unsigned int            power_off_longtime;     /* Units: ms */
+	unsigned int		hs_max_dtr;
+	unsigned int		sectors;
+	unsigned int		card_type;
+	unsigned int		hc_erase_size;		/* In sectors */
+	unsigned int		hc_erase_timeout;	/* In milliseconds */
+	unsigned int		sec_trim_mult;	/* Secure trim multiplier  */
+	unsigned int		sec_erase_mult;	/* Secure erase multiplier */
+	unsigned int		trim_timeout;		/* In milliseconds */
+	bool			enhanced_area_en;	/* enable bit */
+	unsigned long long	enhanced_area_offset;	/* Units: Byte */
+	unsigned int		enhanced_area_size;	/* Units: KB */
+	unsigned int		cache_size;		/* Units: KB */
+	bool			hpi_en;			/* HPI enablebit */
+	bool			hpi;			/* HPI support bit */
+	unsigned int		hpi_cmd;		/* cmd used as HPI */
+	unsigned int            data_sector_size;       /* 512 bytes or 4KB */
+	unsigned int            data_tag_unit_size;     /* DATA TAG UNIT size */
+	unsigned int		boot_ro_lock;		/* ro lock support */
+	bool			boot_ro_lockable;
+	u8			raw_partition_support;	/* 160 */
+	u8			raw_erased_mem_count;	/* 181 */
+	u8			raw_ext_csd_structure;	/* 194 */
+	u8			raw_card_type;		/* 196 */
+	u8			out_of_int_time;	/* 198 */
+	u8			raw_s_a_timeout;		/* 217 */
+	u8			raw_hc_erase_gap_size;	/* 221 */
+	u8			raw_erase_timeout_mult;	/* 223 */
+	u8			raw_hc_erase_grp_size;	/* 224 */
+	u8			raw_sec_trim_mult;	/* 229 */
+	u8			raw_sec_erase_mult;	/* 230 */
+	u8			raw_sec_feature_support;/* 231 */
+	u8			raw_trim_mult;		/* 232 */
+	u8			raw_sectors[4];		/* 212 - 4 bytes */
+
+	unsigned int            feature_support;
+#define MMC_DISCARD_FEATURE	BIT(0)                  /* CMD38 feature */
+};
+
+struct sd_scr {
+	unsigned char		sda_vsn;
+	unsigned char		sda_spec3;
+	unsigned char		bus_widths;
+#define SD_SCR_BUS_WIDTH_1	(1<<0)
+#define SD_SCR_BUS_WIDTH_4	(1<<2)
+	unsigned char		cmds;
+#define SD_SCR_CMD20_SUPPORT   (1<<0)
+#define SD_SCR_CMD23_SUPPORT   (1<<1)
+};
+
+struct sd_ssr {
+	unsigned int		au;			/* In sectors */
+	unsigned int		erase_timeout;		/* In milliseconds */
+	unsigned int		erase_offset;		/* In milliseconds */
+};
+
+struct sd_switch_caps {
+	unsigned int		hs_max_dtr;
+	unsigned int		uhs_max_dtr;
+#define HIGH_SPEED_MAX_DTR	50000000
+#define UHS_SDR104_MAX_DTR	208000000
+#define UHS_SDR50_MAX_DTR	100000000
+#define UHS_DDR50_MAX_DTR	50000000
+#define UHS_SDR25_MAX_DTR	UHS_DDR50_MAX_DTR
+#define UHS_SDR12_MAX_DTR	25000000
+	unsigned int		sd3_bus_mode;
+#define UHS_SDR12_BUS_SPEED	0
+#define HIGH_SPEED_BUS_SPEED	1
+#define UHS_SDR25_BUS_SPEED	1
+#define UHS_SDR50_BUS_SPEED	2
+#define UHS_SDR104_BUS_SPEED	3
+#define UHS_DDR50_BUS_SPEED	4
+
+#define SD_MODE_HIGH_SPEED	(1 << HIGH_SPEED_BUS_SPEED)
+#define SD_MODE_UHS_SDR12	(1 << UHS_SDR12_BUS_SPEED)
+#define SD_MODE_UHS_SDR25	(1 << UHS_SDR25_BUS_SPEED)
+#define SD_MODE_UHS_SDR50	(1 << UHS_SDR50_BUS_SPEED)
+#define SD_MODE_UHS_SDR104	(1 << UHS_SDR104_BUS_SPEED)
+#define SD_MODE_UHS_DDR50	(1 << UHS_DDR50_BUS_SPEED)
+	unsigned int		sd3_drv_type;
+#define SD_DRIVER_TYPE_B	0x01
+#define SD_DRIVER_TYPE_A	0x02
+#define SD_DRIVER_TYPE_C	0x04
+#define SD_DRIVER_TYPE_D	0x08
+	unsigned int		sd3_curr_limit;
+#define SD_SET_CURRENT_LIMIT_200	0
+#define SD_SET_CURRENT_LIMIT_400	1
+#define SD_SET_CURRENT_LIMIT_600	2
+#define SD_SET_CURRENT_LIMIT_800	3
+
+#define SD_MAX_CURRENT_200	(1 << SD_SET_CURRENT_LIMIT_200)
+#define SD_MAX_CURRENT_400	(1 << SD_SET_CURRENT_LIMIT_400)
+#define SD_MAX_CURRENT_600	(1 << SD_SET_CURRENT_LIMIT_600)
+#define SD_MAX_CURRENT_800	(1 << SD_SET_CURRENT_LIMIT_800)
+};
+
+struct sdio_cccr {
+	unsigned int		sdio_vsn;
+	unsigned int		sd_vsn;
+	unsigned int		multi_block:1,
+				low_speed:1,
+				wide_bus:1,
+				high_power:1,
+				high_speed:1,
+				disable_cd:1;
+};
+
+struct sdio_cis {
+	unsigned short		vendor;
+	unsigned short		device;
+	unsigned short		blksize;
+	unsigned int		max_dtr;
+};
+
+struct mmc_host;
+struct sdio_func;
+struct sdio_func_tuple;
+
+#define SDIO_MAX_FUNCS		7
+
+/* The number of MMC physical partitions.  These consist of:
+ * boot partitions (2), general purpose partitions (4) in MMC v4.4.
+ */
+#define MMC_NUM_BOOT_PARTITION	2
+#define MMC_NUM_GP_PARTITION	4
+#define MMC_NUM_PHY_PARTITION	6
+#define MAX_MMC_PART_NAME_LEN	20
+
+/*
+ * MMC Physical partitions
+ */
+struct mmc_part {
+	unsigned int	size;	/* partition size (in bytes) */
+	unsigned int	part_cfg;	/* partition type */
+	char	name[MAX_MMC_PART_NAME_LEN];
+	bool	force_ro;	/* to make boot parts RO by default */
+	unsigned int	area_type;
+#define MMC_BLK_DATA_AREA_MAIN	(1<<0)
+#define MMC_BLK_DATA_AREA_BOOT	(1<<1)
+#define MMC_BLK_DATA_AREA_GP	(1<<2)
+};
+
+/*
+ * MMC device
+ */
+struct mmc_card {
+	struct mmc_host		*host;		/* the host this device belongs to */
+	struct device		dev;		/* the device */
+	unsigned int		rca;		/* relative card address of device */
+	unsigned int		type;		/* card type */
+#define MMC_TYPE_MMC		0		/* MMC card */
+#define MMC_TYPE_SD		1		/* SD card */
+#define MMC_TYPE_SDIO		2		/* SDIO card */
+#define MMC_TYPE_SD_COMBO	3		/* SD combo (IO+mem) card */
+	unsigned int		state;		/* (our) card state */
+#define MMC_STATE_PRESENT	(1<<0)		/* present in sysfs */
+#define MMC_STATE_READONLY	(1<<1)		/* card is read-only */
+#define MMC_STATE_HIGHSPEED	(1<<2)		/* card is in high speed mode */
+#define MMC_STATE_BLOCKADDR	(1<<3)		/* card uses block-addressing */
+#define MMC_STATE_HIGHSPEED_DDR (1<<4)		/* card is in high speed mode */
+#define MMC_STATE_ULTRAHIGHSPEED (1<<5)		/* card is in ultra high speed mode */
+#define MMC_CARD_SDXC		(1<<6)		/* card is SDXC */
+#define MMC_CARD_REMOVED	(1<<7)		/* card has been removed */
+#define MMC_STATE_HIGHSPEED_200	(1<<8)		/* card is in HS200 mode */
+#define MMC_STATE_SLEEP		(1<<9)		/* card is in sleep state */
+	unsigned int		quirks; 	/* card quirks */
+#define MMC_QUIRK_LENIENT_FN0	(1<<0)		/* allow SDIO FN0 writes outside of the VS CCCR range */
+#define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1)	/* use func->cur_blksize */
+						/* for byte mode */
+#define MMC_QUIRK_NONSTD_SDIO	(1<<2)		/* non-standard SDIO card attached */
+						/* (missing CIA registers) */
+#define MMC_QUIRK_BROKEN_CLK_GATING (1<<3)	/* clock gating the sdio bus will make card fail */
+#define MMC_QUIRK_NONSTD_FUNC_IF (1<<4)		/* SDIO card has nonstd function interfaces */
+#define MMC_QUIRK_DISABLE_CD	(1<<5)		/* disconnect CD/DAT[3] resistor */
+#define MMC_QUIRK_INAND_CMD38	(1<<6)		/* iNAND devices have broken CMD38 */
+#define MMC_QUIRK_BLK_NO_CMD23	(1<<7)		/* Avoid CMD23 for regular multiblock */
+#define MMC_QUIRK_BROKEN_BYTE_MODE_512 (1<<8)	/* Avoid sending 512 bytes in */
+#define MMC_QUIRK_LONG_READ_TIME (1<<9)		/* Data read time > CSD says */
+						/* byte mode */
+	unsigned int    poweroff_notify_state;	/* eMMC4.5 notify feature */
+#define MMC_NO_POWER_NOTIFICATION	0
+#define MMC_POWERED_ON			1
+#define MMC_POWEROFF_SHORT		2
+#define MMC_POWEROFF_LONG		3
+
+	unsigned int		erase_size;	/* erase size in sectors */
+ 	unsigned int		erase_shift;	/* if erase unit is power 2 */
+ 	unsigned int		pref_erase;	/* in sectors */
+ 	u8			erased_byte;	/* value of erased bytes */
+
+	u32			raw_cid[4];	/* raw card CID */
+	u32			raw_csd[4];	/* raw card CSD */
+	u32			raw_scr[2];	/* raw card SCR */
+	struct mmc_cid		cid;		/* card identification */
+	struct mmc_csd		csd;		/* card specific */
+	struct mmc_ext_csd	ext_csd;	/* mmc v4 extended card specific */
+	struct sd_scr		scr;		/* extra SD information */
+	struct sd_ssr		ssr;		/* yet more SD information */
+	struct sd_switch_caps	sw_caps;	/* switch (CMD6) caps */
+
+	unsigned int		sdio_funcs;	/* number of SDIO functions */
+	struct sdio_cccr	cccr;		/* common card info */
+	struct sdio_cis		cis;		/* common tuple info */
+	struct sdio_func	*sdio_func[SDIO_MAX_FUNCS]; /* SDIO functions (devices) */
+	struct sdio_func	*sdio_single_irq; /* SDIO function when only one IRQ active */
+	unsigned		num_info;	/* number of info strings */
+	const char		**info;		/* info strings */
+	struct sdio_func_tuple	*tuples;	/* unknown common tuples */
+
+	unsigned int		sd_bus_speed;	/* Bus Speed Mode set for the card */
+
+	struct dentry		*debugfs_root;
+	struct mmc_part	part[MMC_NUM_PHY_PARTITION]; /* physical partitions */
+	unsigned int    nr_parts;
+};
+
+/*
+ * This function fill contents in mmc_part.
+ */
+static inline void mmc_part_add(struct mmc_card *card, unsigned int size,
+			unsigned int part_cfg, char *name, int idx, bool ro,
+			int area_type)
+{
+	card->part[card->nr_parts].size = size;
+	card->part[card->nr_parts].part_cfg = part_cfg;
+	sprintf(card->part[card->nr_parts].name, name, idx);
+	card->part[card->nr_parts].force_ro = ro;
+	card->part[card->nr_parts].area_type = area_type;
+	card->nr_parts++;
+}
+
+/*
+ *  The world is not perfect and supplies us with broken mmc/sdio devices.
+ *  For at least some of these bugs we need a work-around.
+ */
+
+struct mmc_fixup {
+	/* CID-specific fields. */
+	const char *name;
+
+	/* Valid revision range */
+	u64 rev_start, rev_end;
+
+	unsigned int manfid;
+	unsigned short oemid;
+
+	/* SDIO-specfic fields. You can use SDIO_ANY_ID here of course */
+	u16 cis_vendor, cis_device;
+
+	void (*vendor_fixup)(struct mmc_card *card, int data);
+	int data;
+};
+
+#define CID_MANFID_ANY (-1u)
+#define CID_OEMID_ANY ((unsigned short) -1)
+#define CID_NAME_ANY (NULL)
+
+#define END_FIXUP { 0 }
+
+#define _FIXUP_EXT(_name, _manfid, _oemid, _rev_start, _rev_end,	\
+		   _cis_vendor, _cis_device,				\
+		   _fixup, _data)					\
+	{						   \
+		.name = (_name),			   \
+		.manfid = (_manfid),			   \
+		.oemid = (_oemid),			   \
+		.rev_start = (_rev_start),		   \
+		.rev_end = (_rev_end),			   \
+		.cis_vendor = (_cis_vendor),		   \
+		.cis_device = (_cis_device),		   \
+		.vendor_fixup = (_fixup),		   \
+		.data = (_data),			   \
+	 }
+
+#define MMC_FIXUP_REV(_name, _manfid, _oemid, _rev_start, _rev_end,	\
+		      _fixup, _data)					\
+	_FIXUP_EXT(_name, _manfid,					\
+		   _oemid, _rev_start, _rev_end,			\
+		   SDIO_ANY_ID, SDIO_ANY_ID,				\
+		   _fixup, _data)					\
+
+#define MMC_FIXUP(_name, _manfid, _oemid, _fixup, _data) \
+	MMC_FIXUP_REV(_name, _manfid, _oemid, 0, -1ull, _fixup, _data)
+
+#define SDIO_FIXUP(_vendor, _device, _fixup, _data)			\
+	_FIXUP_EXT(CID_NAME_ANY, CID_MANFID_ANY,			\
+		    CID_OEMID_ANY, 0, -1ull,				\
+		   _vendor, _device,					\
+		   _fixup, _data)					\
+
+#define cid_rev(hwrev, fwrev, year, month)	\
+	(((u64) hwrev) << 40 |                  \
+	 ((u64) fwrev) << 32 |                  \
+	 ((u64) year) << 16 |                   \
+	 ((u64) month))
+
+#define cid_rev_card(card)		  \
+	cid_rev(card->cid.hwrev,	  \
+		    card->cid.fwrev,      \
+		    card->cid.year,	  \
+		    card->cid.month)
+
+/*
+ * Unconditionally quirk add/remove.
+ */
+
+static inline void __maybe_unused add_quirk(struct mmc_card *card, int data)
+{
+	card->quirks |= data;
+}
+
+static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data)
+{
+	card->quirks &= ~data;
+}
+
+#define mmc_card_mmc(c)		((c)->type == MMC_TYPE_MMC)
+#define mmc_card_sd(c)		((c)->type == MMC_TYPE_SD)
+#define mmc_card_sdio(c)	((c)->type == MMC_TYPE_SDIO)
+
+#define mmc_card_present(c)	((c)->state & MMC_STATE_PRESENT)
+#define mmc_card_readonly(c)	((c)->state & MMC_STATE_READONLY)
+#define mmc_card_highspeed(c)	((c)->state & MMC_STATE_HIGHSPEED)
+#define mmc_card_hs200(c)	((c)->state & MMC_STATE_HIGHSPEED_200)
+#define mmc_card_blockaddr(c)	((c)->state & MMC_STATE_BLOCKADDR)
+#define mmc_card_ddr_mode(c)	((c)->state & MMC_STATE_HIGHSPEED_DDR)
+#define mmc_card_uhs(c)		((c)->state & MMC_STATE_ULTRAHIGHSPEED)
+#define mmc_sd_card_uhs(c)	((c)->state & MMC_STATE_ULTRAHIGHSPEED)
+#define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC)
+#define mmc_card_removed(c)	((c) && ((c)->state & MMC_CARD_REMOVED))
+#define mmc_card_is_sleep(c)	((c)->state & MMC_STATE_SLEEP)
+
+#define mmc_card_set_present(c)	((c)->state |= MMC_STATE_PRESENT)
+#define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY)
+#define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED)
+#define mmc_card_set_hs200(c)	((c)->state |= MMC_STATE_HIGHSPEED_200)
+#define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR)
+#define mmc_card_set_ddr_mode(c) ((c)->state |= MMC_STATE_HIGHSPEED_DDR)
+#define mmc_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED)
+#define mmc_sd_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED)
+#define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC)
+#define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED)
+#define mmc_card_set_sleep(c)	((c)->state |= MMC_STATE_SLEEP)
+
+#define mmc_card_clr_sleep(c)	((c)->state &= ~MMC_STATE_SLEEP)
+/*
+ * Quirk add/remove for MMC products.
+ */
+
+static inline void __maybe_unused add_quirk_mmc(struct mmc_card *card, int data)
+{
+	if (mmc_card_mmc(card))
+		card->quirks |= data;
+}
+
+static inline void __maybe_unused remove_quirk_mmc(struct mmc_card *card,
+						   int data)
+{
+	if (mmc_card_mmc(card))
+		card->quirks &= ~data;
+}
+
+/*
+ * Quirk add/remove for SD products.
+ */
+
+static inline void __maybe_unused add_quirk_sd(struct mmc_card *card, int data)
+{
+	if (mmc_card_sd(card))
+		card->quirks |= data;
+}
+
+static inline void __maybe_unused remove_quirk_sd(struct mmc_card *card,
+						   int data)
+{
+	if (mmc_card_sd(card))
+		card->quirks &= ~data;
+}
+
+static inline int mmc_card_lenient_fn0(const struct mmc_card *c)
+{
+	return c->quirks & MMC_QUIRK_LENIENT_FN0;
+}
+
+static inline int mmc_blksz_for_byte_mode(const struct mmc_card *c)
+{
+	return c->quirks & MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
+}
+
+static inline int mmc_card_disable_cd(const struct mmc_card *c)
+{
+	return c->quirks & MMC_QUIRK_DISABLE_CD;
+}
+
+static inline int mmc_card_nonstd_func_interface(const struct mmc_card *c)
+{
+	return c->quirks & MMC_QUIRK_NONSTD_FUNC_IF;
+}
+
+static inline int mmc_card_broken_byte_mode_512(const struct mmc_card *c)
+{
+	return c->quirks & MMC_QUIRK_BROKEN_BYTE_MODE_512;
+}
+
+static inline int mmc_card_long_read_time(const struct mmc_card *c)
+{
+	return c->quirks & MMC_QUIRK_LONG_READ_TIME;
+}
+
+#define mmc_card_name(c)	((c)->cid.prod_name)
+#define mmc_card_id(c)		(dev_name(&(c)->dev))
+
+#define mmc_dev_to_card(d)	container_of(d, struct mmc_card, dev)
+
+#define mmc_list_to_card(l)	container_of(l, struct mmc_card, node)
+#define mmc_get_drvdata(c)	dev_get_drvdata(&(c)->dev)
+#define mmc_set_drvdata(c,d)	dev_set_drvdata(&(c)->dev, d)
+
+/*
+ * MMC device driver (e.g., Flash card, I/O card...)
+ */
+struct mmc_driver {
+	struct device_driver drv;
+	int (*probe)(struct mmc_card *);
+	void (*remove)(struct mmc_card *);
+	int (*suspend)(struct mmc_card *);
+	int (*resume)(struct mmc_card *);
+};
+
+extern int mmc_register_driver(struct mmc_driver *);
+extern void mmc_unregister_driver(struct mmc_driver *);
+
+extern void mmc_fixup_device(struct mmc_card *card,
+			     const struct mmc_fixup *table);
+
+#endif /* LINUX_MMC_CARD_H */
diff --git a/include/linux/mmc/cd-gpio.h b/include/linux/mmc/cd-gpio.h
new file mode 100644
index 00000000..cefaba03
--- /dev/null
+++ b/include/linux/mmc/cd-gpio.h
@@ -0,0 +1,18 @@
+/*
+ * Generic GPIO card-detect helper header
+ *
+ * Copyright (C) 2011, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MMC_CD_GPIO_H
+#define MMC_CD_GPIO_H
+
+struct mmc_host;
+int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio);
+void mmc_cd_gpio_free(struct mmc_host *host);
+
+#endif
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
new file mode 100644
index 00000000..1b431c72
--- /dev/null
+++ b/include/linux/mmc/core.h
@@ -0,0 +1,197 @@
+/*
+ *  linux/include/linux/mmc/core.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef LINUX_MMC_CORE_H
+#define LINUX_MMC_CORE_H
+
+#include <linux/interrupt.h>
+#include <linux/completion.h>
+
+struct request;
+struct mmc_data;
+struct mmc_request;
+
+struct mmc_command {
+	u32			opcode;
+	u32			arg;
+	u32			resp[4];
+	unsigned int		flags;		/* expected response type */
+#define MMC_RSP_PRESENT	(1 << 0)
+#define MMC_RSP_136	(1 << 1)		/* 136 bit response */
+#define MMC_RSP_CRC	(1 << 2)		/* expect valid crc */
+#define MMC_RSP_BUSY	(1 << 3)		/* card may send busy */
+#define MMC_RSP_OPCODE	(1 << 4)		/* response contains opcode */
+
+#define MMC_CMD_MASK	(3 << 5)		/* non-SPI command type */
+#define MMC_CMD_AC	(0 << 5)
+#define MMC_CMD_ADTC	(1 << 5)
+#define MMC_CMD_BC	(2 << 5)
+#define MMC_CMD_BCR	(3 << 5)
+
+#define MMC_RSP_SPI_S1	(1 << 7)		/* one status byte */
+#define MMC_RSP_SPI_S2	(1 << 8)		/* second byte */
+#define MMC_RSP_SPI_B4	(1 << 9)		/* four data bytes */
+#define MMC_RSP_SPI_BUSY (1 << 10)		/* card may send busy */
+
+/*
+ * These are the native response types, and correspond to valid bit
+ * patterns of the above flags.  One additional valid pattern
+ * is all zeros, which means we don't expect a response.
+ */
+#define MMC_RSP_NONE	(0)
+#define MMC_RSP_R1	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
+#define MMC_RSP_R1B	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY)
+#define MMC_RSP_R2	(MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
+#define MMC_RSP_R3	(MMC_RSP_PRESENT)
+#define MMC_RSP_R4	(MMC_RSP_PRESENT)
+#define MMC_RSP_R5	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
+#define MMC_RSP_R6	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
+#define MMC_RSP_R7	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
+
+#define mmc_resp_type(cmd)	((cmd)->flags & (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC|MMC_RSP_BUSY|MMC_RSP_OPCODE))
+
+/*
+ * These are the SPI response types for MMC, SD, and SDIO cards.
+ * Commands return R1, with maybe more info.  Zero is an error type;
+ * callers must always provide the appropriate MMC_RSP_SPI_Rx flags.
+ */
+#define MMC_RSP_SPI_R1	(MMC_RSP_SPI_S1)
+#define MMC_RSP_SPI_R1B	(MMC_RSP_SPI_S1|MMC_RSP_SPI_BUSY)
+#define MMC_RSP_SPI_R2	(MMC_RSP_SPI_S1|MMC_RSP_SPI_S2)
+#define MMC_RSP_SPI_R3	(MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
+#define MMC_RSP_SPI_R4	(MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
+#define MMC_RSP_SPI_R5	(MMC_RSP_SPI_S1|MMC_RSP_SPI_S2)
+#define MMC_RSP_SPI_R7	(MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
+
+#define mmc_spi_resp_type(cmd)	((cmd)->flags & \
+		(MMC_RSP_SPI_S1|MMC_RSP_SPI_BUSY|MMC_RSP_SPI_S2|MMC_RSP_SPI_B4))
+
+/*
+ * These are the command types.
+ */
+#define mmc_cmd_type(cmd)	((cmd)->flags & MMC_CMD_MASK)
+
+	unsigned int		retries;	/* max number of retries */
+	unsigned int		error;		/* command error */
+
+/*
+ * Standard errno values are used for errors, but some have specific
+ * meaning in the MMC layer:
+ *
+ * ETIMEDOUT    Card took too long to respond
+ * EILSEQ       Basic format problem with the received or sent data
+ *              (e.g. CRC check failed, incorrect opcode in response
+ *              or bad end bit)
+ * EINVAL       Request cannot be performed because of restrictions
+ *              in hardware and/or the driver
+ * ENOMEDIUM    Host can determine that the slot is empty and is
+ *              actively failing requests
+ */
+
+	unsigned int		cmd_timeout_ms;	/* in milliseconds */
+
+	struct mmc_data		*data;		/* data segment associated with cmd */
+	struct mmc_request	*mrq;		/* associated request */
+};
+
+struct mmc_data {
+	unsigned int		timeout_ns;	/* data timeout (in ns, max 80ms) */
+	unsigned int		timeout_clks;	/* data timeout (in clocks) */
+	unsigned int		blksz;		/* data block size */
+	unsigned int		blocks;		/* number of blocks */
+	unsigned int		error;		/* data error */
+	unsigned int		flags;
+
+#define MMC_DATA_WRITE	(1 << 8)
+#define MMC_DATA_READ	(1 << 9)
+#define MMC_DATA_STREAM	(1 << 10)
+
+	unsigned int		bytes_xfered;
+
+	struct mmc_command	*stop;		/* stop command */
+	struct mmc_request	*mrq;		/* associated request */
+
+	unsigned int		sg_len;		/* size of scatter list */
+	struct scatterlist	*sg;		/* I/O scatter list */
+	s32			host_cookie;	/* host private data */
+};
+
+struct mmc_request {
+	struct mmc_command	*sbc;		/* SET_BLOCK_COUNT for multiblock */
+	struct mmc_command	*cmd;
+	struct mmc_data		*data;
+	struct mmc_command	*stop;
+
+	struct completion	completion;
+	void			(*done)(struct mmc_request *);/* completion function */
+};
+
+struct mmc_host;
+struct mmc_card;
+struct mmc_async_req;
+
+extern struct mmc_async_req *mmc_start_req(struct mmc_host *,
+					   struct mmc_async_req *, int *);
+extern int mmc_interrupt_hpi(struct mmc_card *);
+extern void mmc_wait_for_req(struct mmc_host *, struct mmc_request *);
+extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int);
+extern int mmc_app_cmd(struct mmc_host *, struct mmc_card *);
+extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
+	struct mmc_command *, int);
+extern int mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int);
+
+#define MMC_ERASE_ARG		0x00000000
+#define MMC_SECURE_ERASE_ARG	0x80000000
+#define MMC_TRIM_ARG		0x00000001
+#define MMC_DISCARD_ARG		0x00000003
+#define MMC_SECURE_TRIM1_ARG	0x80000001
+#define MMC_SECURE_TRIM2_ARG	0x80008000
+
+#define MMC_SECURE_ARGS		0x80000000
+#define MMC_TRIM_ARGS		0x00008001
+
+extern int mmc_erase(struct mmc_card *card, unsigned int from, unsigned int nr,
+		     unsigned int arg);
+extern int mmc_can_erase(struct mmc_card *card);
+extern int mmc_can_trim(struct mmc_card *card);
+extern int mmc_can_discard(struct mmc_card *card);
+extern int mmc_can_sanitize(struct mmc_card *card);
+extern int mmc_can_secure_erase_trim(struct mmc_card *card);
+extern int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from,
+				   unsigned int nr);
+extern unsigned int mmc_calc_max_discard(struct mmc_card *card);
+
+extern int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen);
+extern int mmc_hw_reset(struct mmc_host *host);
+extern int mmc_hw_reset_check(struct mmc_host *host);
+extern int mmc_can_reset(struct mmc_card *card);
+
+extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *);
+extern unsigned int mmc_align_data_size(struct mmc_card *, unsigned int);
+
+extern int __mmc_claim_host(struct mmc_host *host, atomic_t *abort);
+extern void mmc_release_host(struct mmc_host *host);
+extern int mmc_try_claim_host(struct mmc_host *host);
+
+extern int mmc_flush_cache(struct mmc_card *);
+
+extern int mmc_detect_card_removed(struct mmc_host *host);
+
+/**
+ *	mmc_claim_host - exclusively claim a host
+ *	@host: mmc host to claim
+ *
+ *	Claim a host for a set of operations.
+ */
+static inline void mmc_claim_host(struct mmc_host *host)
+{
+	__mmc_claim_host(host, NULL);
+}
+
+extern u32 mmc_vddrange_to_ocrmask(int vdd_min, int vdd_max);
+
+#endif /* LINUX_MMC_CORE_H */
diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
new file mode 100644
index 00000000..8f66e28f
--- /dev/null
+++ b/include/linux/mmc/dw_mmc.h
@@ -0,0 +1,253 @@
+/*
+ * Synopsys DesignWare Multimedia Card Interface driver
+ *  (Based on NXP driver for lpc 31xx)
+ *
+ * Copyright (C) 2009 NXP Semiconductors
+ * Copyright (C) 2009, 2010 Imagination Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef LINUX_MMC_DW_MMC_H
+#define LINUX_MMC_DW_MMC_H
+
+#include <linux/scatterlist.h>
+
+#define MAX_MCI_SLOTS	2
+
+enum dw_mci_state {
+	STATE_IDLE = 0,
+	STATE_SENDING_CMD,
+	STATE_SENDING_DATA,
+	STATE_DATA_BUSY,
+	STATE_SENDING_STOP,
+	STATE_DATA_ERROR,
+};
+
+enum {
+	EVENT_CMD_COMPLETE = 0,
+	EVENT_XFER_COMPLETE,
+	EVENT_DATA_COMPLETE,
+	EVENT_DATA_ERROR,
+	EVENT_XFER_ERROR
+};
+
+struct mmc_data;
+
+/**
+ * struct dw_mci - MMC controller state shared between all slots
+ * @lock: Spinlock protecting the queue and associated data.
+ * @regs: Pointer to MMIO registers.
+ * @sg: Scatterlist entry currently being processed by PIO code, if any.
+ * @sg_miter: PIO mapping scatterlist iterator.
+ * @cur_slot: The slot which is currently using the controller.
+ * @mrq: The request currently being processed on @cur_slot,
+ *	or NULL if the controller is idle.
+ * @cmd: The command currently being sent to the card, or NULL.
+ * @data: The data currently being transferred, or NULL if no data
+ *	transfer is in progress.
+ * @use_dma: Whether DMA channel is initialized or not.
+ * @using_dma: Whether DMA is in use for the current transfer.
+ * @sg_dma: Bus address of DMA buffer.
+ * @sg_cpu: Virtual address of DMA buffer.
+ * @dma_ops: Pointer to platform-specific DMA callbacks.
+ * @cmd_status: Snapshot of SR taken upon completion of the current
+ *	command. Only valid when EVENT_CMD_COMPLETE is pending.
+ * @data_status: Snapshot of SR taken upon completion of the current
+ *	data transfer. Only valid when EVENT_DATA_COMPLETE or
+ *	EVENT_DATA_ERROR is pending.
+ * @stop_cmdr: Value to be loaded into CMDR when the stop command is
+ *	to be sent.
+ * @dir_status: Direction of current transfer.
+ * @tasklet: Tasklet running the request state machine.
+ * @card_tasklet: Tasklet handling card detect.
+ * @pending_events: Bitmask of events flagged by the interrupt handler
+ *	to be processed by the tasklet.
+ * @completed_events: Bitmask of events which the state machine has
+ *	processed.
+ * @state: Tasklet state.
+ * @queue: List of slots waiting for access to the controller.
+ * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus
+ *	rate and timeout calculations.
+ * @current_speed: Configured rate of the controller.
+ * @num_slots: Number of slots available.
+ * @verid: Denote Version ID.
+ * @data_offset: Set the offset of DATA register according to VERID.
+ * @dev: Device associated with the MMC controller.
+ * @pdata: Platform data associated with the MMC controller.
+ * @slot: Slots sharing this MMC controller.
+ * @fifo_depth: depth of FIFO.
+ * @data_shift: log2 of FIFO item size.
+ * @part_buf_start: Start index in part_buf.
+ * @part_buf_count: Bytes of partial data in part_buf.
+ * @part_buf: Simple buffer for partial fifo reads/writes.
+ * @push_data: Pointer to FIFO push function.
+ * @pull_data: Pointer to FIFO pull function.
+ * @quirks: Set of quirks that apply to specific versions of the IP.
+ * @irq_flags: The flags to be passed to request_irq.
+ * @irq: The irq value to be passed to request_irq.
+ *
+ * Locking
+ * =======
+ *
+ * @lock is a softirq-safe spinlock protecting @queue as well as
+ * @cur_slot, @mrq and @state. These must always be updated
+ * at the same time while holding @lock.
+ *
+ * The @mrq field of struct dw_mci_slot is also protected by @lock,
+ * and must always be written at the same time as the slot is added to
+ * @queue.
+ *
+ * @pending_events and @completed_events are accessed using atomic bit
+ * operations, so they don't need any locking.
+ *
+ * None of the fields touched by the interrupt handler need any
+ * locking. However, ordering is important: Before EVENT_DATA_ERROR or
+ * EVENT_DATA_COMPLETE is set in @pending_events, all data-related
+ * interrupts must be disabled and @data_status updated with a
+ * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the
+ * CMDRDY interrupt must be disabled and @cmd_status updated with a
+ * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the
+ * bytes_xfered field of @data must be written. This is ensured by
+ * using barriers.
+ */
+struct dw_mci {
+	spinlock_t		lock;
+	void __iomem		*regs;
+
+	struct scatterlist	*sg;
+	struct sg_mapping_iter	sg_miter;
+
+	struct dw_mci_slot	*cur_slot;
+	struct mmc_request	*mrq;
+	struct mmc_command	*cmd;
+	struct mmc_data		*data;
+
+	/* DMA interface members*/
+	int			use_dma;
+	int			using_dma;
+
+	dma_addr_t		sg_dma;
+	void			*sg_cpu;
+	struct dw_mci_dma_ops	*dma_ops;
+#ifdef CONFIG_MMC_DW_IDMAC
+	unsigned int		ring_size;
+#else
+	struct dw_mci_dma_data	*dma_data;
+#endif
+	u32			cmd_status;
+	u32			data_status;
+	u32			stop_cmdr;
+	u32			dir_status;
+	struct tasklet_struct	tasklet;
+	struct work_struct	card_work;
+	unsigned long		pending_events;
+	unsigned long		completed_events;
+	enum dw_mci_state	state;
+	struct list_head	queue;
+
+	u32			bus_hz;
+	u32			current_speed;
+	u32			num_slots;
+	u32			fifoth_val;
+	u16			verid;
+	u16			data_offset;
+	struct device		dev;
+	struct dw_mci_board	*pdata;
+	struct dw_mci_slot	*slot[MAX_MCI_SLOTS];
+
+	/* FIFO push and pull */
+	int			fifo_depth;
+	int			data_shift;
+	u8			part_buf_start;
+	u8			part_buf_count;
+	union {
+		u16		part_buf16;
+		u32		part_buf32;
+		u64		part_buf;
+	};
+	void (*push_data)(struct dw_mci *host, void *buf, int cnt);
+	void (*pull_data)(struct dw_mci *host, void *buf, int cnt);
+
+	/* Workaround flags */
+	u32			quirks;
+
+	struct regulator	*vmmc;	/* Power regulator */
+	unsigned long		irq_flags; /* IRQ flags */
+	unsigned int		irq;
+};
+
+/* DMA ops for Internal/External DMAC interface */
+struct dw_mci_dma_ops {
+	/* DMA Ops */
+	int (*init)(struct dw_mci *host);
+	void (*start)(struct dw_mci *host, unsigned int sg_len);
+	void (*complete)(struct dw_mci *host);
+	void (*stop)(struct dw_mci *host);
+	void (*cleanup)(struct dw_mci *host);
+	void (*exit)(struct dw_mci *host);
+};
+
+/* IP Quirks/flags. */
+/* DTO fix for command transmission with IDMAC configured */
+#define DW_MCI_QUIRK_IDMAC_DTO			BIT(0)
+/* delay needed between retries on some 2.11a implementations */
+#define DW_MCI_QUIRK_RETRY_DELAY		BIT(1)
+/* High Speed Capable - Supports HS cards (up to 50MHz) */
+#define DW_MCI_QUIRK_HIGHSPEED			BIT(2)
+/* Unreliable card detection */
+#define DW_MCI_QUIRK_BROKEN_CARD_DETECTION	BIT(3)
+
+
+struct dma_pdata;
+
+struct block_settings {
+	unsigned short	max_segs;	/* see blk_queue_max_segments */
+	unsigned int	max_blk_size;	/* maximum size of one mmc block */
+	unsigned int	max_blk_count;	/* maximum number of blocks in one req*/
+	unsigned int	max_req_size;	/* maximum number of bytes in one req*/
+	unsigned int	max_seg_size;	/* see blk_queue_max_segment_size */
+};
+
+/* Board platform data */
+struct dw_mci_board {
+	u32 num_slots;
+
+	u32 quirks; /* Workaround / Quirk flags */
+	unsigned int bus_hz; /* Bus speed */
+
+	unsigned int caps;	/* Capabilities */
+	unsigned int caps2;	/* More capabilities */
+	/*
+	 * Override fifo depth. If 0, autodetect it from the FIFOTH register,
+	 * but note that this may not be reliable after a bootloader has used
+	 * it.
+	 */
+	unsigned int fifo_depth;
+
+	/* delay in mS before detecting cards after interrupt */
+	u32 detect_delay_ms;
+
+	int (*init)(u32 slot_id, irq_handler_t , void *);
+	int (*get_ro)(u32 slot_id);
+	int (*get_cd)(u32 slot_id);
+	int (*get_ocr)(u32 slot_id);
+	int (*get_bus_wd)(u32 slot_id);
+	/*
+	 * Enable power to selected slot and set voltage to desired level.
+	 * Voltage levels are specified using MMC_VDD_xxx defines defined
+	 * in linux/mmc/host.h file.
+	 */
+	void (*setpower)(u32 slot_id, u32 volt);
+	void (*exit)(u32 slot_id);
+	void (*select_slot)(u32 slot_id);
+
+	struct dw_mci_dma_ops *dma_ops;
+	struct dma_pdata *data;
+	struct block_settings *blk_settings;
+};
+
+#endif /* LINUX_MMC_DW_MMC_H */
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
new file mode 100644
index 00000000..39c2def3
--- /dev/null
+++ b/include/linux/mmc/host.h
@@ -0,0 +1,486 @@
+/*
+ *  linux/include/linux/mmc/host.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Host driver specific definitions.
+ */
+#ifndef LINUX_MMC_HOST_H
+#define LINUX_MMC_HOST_H
+
+#include <linux/leds.h>
+#include <linux/sched.h>
+#include <linux/device.h>
+#include <linux/fault-inject.h>
+#include <linux/wakelock.h>
+#include <linux/semaphore.h>
+
+#include <linux/mmc/core.h>
+#include <linux/mmc/pm.h>
+
+struct mmc_ios {
+	unsigned int	clock;			/* clock rate */
+	unsigned short	vdd;
+
+/* vdd stores the bit number of the selected voltage range from below. */
+
+	unsigned char	bus_mode;		/* command output mode */
+
+#define MMC_BUSMODE_OPENDRAIN	1
+#define MMC_BUSMODE_PUSHPULL	2
+
+	unsigned char	chip_select;		/* SPI chip select */
+
+#define MMC_CS_DONTCARE		0
+#define MMC_CS_HIGH		1
+#define MMC_CS_LOW		2
+
+	unsigned char	power_mode;		/* power supply mode */
+
+#define MMC_POWER_OFF		0
+#define MMC_POWER_UP		1
+#define MMC_POWER_ON		2
+
+	unsigned char	bus_width;		/* data bus width */
+
+#define MMC_BUS_WIDTH_1		0
+#define MMC_BUS_WIDTH_4		2
+#define MMC_BUS_WIDTH_8		3
+
+	unsigned char	timing;			/* timing specification used */
+
+#define MMC_TIMING_LEGACY	0
+#define MMC_TIMING_MMC_HS	1
+#define MMC_TIMING_SD_HS	2
+#define MMC_TIMING_UHS_SDR12	MMC_TIMING_LEGACY
+#define MMC_TIMING_UHS_SDR25	MMC_TIMING_SD_HS
+#define MMC_TIMING_UHS_SDR50	3
+#define MMC_TIMING_UHS_SDR104	4
+#define MMC_TIMING_UHS_DDR50	5
+#define MMC_TIMING_MMC_HS200	6
+
+#define MMC_SDR_MODE		0
+#define MMC_1_2V_DDR_MODE	1
+#define MMC_1_8V_DDR_MODE	2
+#define MMC_1_2V_SDR_MODE	3
+#define MMC_1_8V_SDR_MODE	4
+
+	unsigned char	signal_voltage;		/* signalling voltage (1.8V or 3.3V) */
+
+#define MMC_SIGNAL_VOLTAGE_330	0
+#define MMC_SIGNAL_VOLTAGE_180	1
+#define MMC_SIGNAL_VOLTAGE_120	2
+
+	unsigned char	drv_type;		/* driver type (A, B, C, D) */
+
+#define MMC_SET_DRIVER_TYPE_B	0
+#define MMC_SET_DRIVER_TYPE_A	1
+#define MMC_SET_DRIVER_TYPE_C	2
+#define MMC_SET_DRIVER_TYPE_D	3
+};
+
+struct mmc_host_ops {
+	/*
+	 * 'enable' is called when the host is claimed and 'disable' is called
+	 * when the host is released. 'enable' and 'disable' are deprecated.
+	 */
+	int (*enable)(struct mmc_host *host);
+	int (*disable)(struct mmc_host *host);
+	/*
+	 * It is optional for the host to implement pre_req and post_req in
+	 * order to support double buffering of requests (prepare one
+	 * request while another request is active).
+	 * pre_req() must always be followed by a post_req().
+	 * To undo a call made to pre_req(), call post_req() with
+	 * a nonzero err condition.
+	 */
+	void	(*post_req)(struct mmc_host *host, struct mmc_request *req,
+			    int err);
+	void	(*pre_req)(struct mmc_host *host, struct mmc_request *req,
+			   bool is_first_req);
+	void	(*request)(struct mmc_host *host, struct mmc_request *req);
+	/*
+	 * Avoid calling these three functions too often or in a "fast path",
+	 * since underlaying controller might implement them in an expensive
+	 * and/or slow way.
+	 *
+	 * Also note that these functions might sleep, so don't call them
+	 * in the atomic contexts!
+	 *
+	 * Return values for the get_ro callback should be:
+	 *   0 for a read/write card
+	 *   1 for a read-only card
+	 *   -ENOSYS when not supported (equal to NULL callback)
+	 *   or a negative errno value when something bad happened
+	 *
+	 * Return values for the get_cd callback should be:
+	 *   0 for a absent card
+	 *   1 for a present card
+	 *   -ENOSYS when not supported (equal to NULL callback)
+	 *   or a negative errno value when something bad happened
+	 */
+	void	(*set_ios)(struct mmc_host *host, struct mmc_ios *ios);
+	int	(*get_ro)(struct mmc_host *host);
+	int	(*get_cd)(struct mmc_host *host);
+	int	 (*get_slot_status)(struct mmc_host *host);
+	void (*dump_host_regs)(struct mmc_host *host);
+
+	void	(*enable_sdio_irq)(struct mmc_host *host, int enable);
+
+	/* optional callback for HC quirks */
+	void	(*init_card)(struct mmc_host *host, struct mmc_card *card);
+
+	int	(*start_signal_voltage_switch)(struct mmc_host *host, struct mmc_ios *ios);
+
+	/* The tuning command opcode value is different for SD and eMMC cards */
+	int	(*execute_tuning)(struct mmc_host *host, u32 opcode);
+	void	(*enable_preset_value)(struct mmc_host *host, bool enable);
+	int	(*select_drive_strength)(unsigned int max_dtr, int host_drv, int card_drv);
+	void	(*hw_reset)(struct mmc_host *host);
+};
+
+struct mmc_card;
+struct device;
+
+struct mmc_async_req {
+	/* active mmc request */
+	struct mmc_request	*mrq;
+	/*
+	 * Check error status of completed mmc request.
+	 * Returns 0 if success otherwise non zero.
+	 */
+	int (*err_check) (struct mmc_card *, struct mmc_async_req *);
+};
+
+struct mmc_hotplug {
+	unsigned int irq;
+	void *handler_priv;
+};
+
+struct mmc_host {
+	struct device		*parent;
+	struct device		class_dev;
+	int			index;
+	const struct mmc_host_ops *ops;
+	unsigned int		f_min;
+	unsigned int		f_max;
+	unsigned int		f_init;
+	u32			ocr_avail;
+	u32			ocr_avail_sdio;	/* SDIO-specific OCR */
+	u32			ocr_avail_sd;	/* SD-specific OCR */
+	u32			ocr_avail_mmc;	/* MMC-specific OCR */
+	struct notifier_block	pm_notify;
+
+#define MMC_VDD_165_195		0x00000080	/* VDD voltage 1.65 - 1.95 */
+#define MMC_VDD_20_21		0x00000100	/* VDD voltage 2.0 ~ 2.1 */
+#define MMC_VDD_21_22		0x00000200	/* VDD voltage 2.1 ~ 2.2 */
+#define MMC_VDD_22_23		0x00000400	/* VDD voltage 2.2 ~ 2.3 */
+#define MMC_VDD_23_24		0x00000800	/* VDD voltage 2.3 ~ 2.4 */
+#define MMC_VDD_24_25		0x00001000	/* VDD voltage 2.4 ~ 2.5 */
+#define MMC_VDD_25_26		0x00002000	/* VDD voltage 2.5 ~ 2.6 */
+#define MMC_VDD_26_27		0x00004000	/* VDD voltage 2.6 ~ 2.7 */
+#define MMC_VDD_27_28		0x00008000	/* VDD voltage 2.7 ~ 2.8 */
+#define MMC_VDD_28_29		0x00010000	/* VDD voltage 2.8 ~ 2.9 */
+#define MMC_VDD_29_30		0x00020000	/* VDD voltage 2.9 ~ 3.0 */
+#define MMC_VDD_30_31		0x00040000	/* VDD voltage 3.0 ~ 3.1 */
+#define MMC_VDD_31_32		0x00080000	/* VDD voltage 3.1 ~ 3.2 */
+#define MMC_VDD_32_33		0x00100000	/* VDD voltage 3.2 ~ 3.3 */
+#define MMC_VDD_33_34		0x00200000	/* VDD voltage 3.3 ~ 3.4 */
+#define MMC_VDD_34_35		0x00400000	/* VDD voltage 3.4 ~ 3.5 */
+#define MMC_VDD_35_36		0x00800000	/* VDD voltage 3.5 ~ 3.6 */
+
+	unsigned long		caps;		/* Host capabilities */
+
+#define MMC_CAP_4_BIT_DATA	(1 << 0)	/* Can the host do 4 bit transfers */
+#define MMC_CAP_MMC_HIGHSPEED	(1 << 1)	/* Can do MMC high-speed timing */
+#define MMC_CAP_SD_HIGHSPEED	(1 << 2)	/* Can do SD high-speed timing */
+#define MMC_CAP_SDIO_IRQ	(1 << 3)	/* Can signal pending SDIO IRQs */
+#define MMC_CAP_SPI		(1 << 4)	/* Talks only SPI protocols */
+#define MMC_CAP_NEEDS_POLL	(1 << 5)	/* Needs polling for card-detection */
+#define MMC_CAP_8_BIT_DATA	(1 << 6)	/* Can the host do 8 bit transfers */
+
+#define MMC_CAP_NONREMOVABLE	(1 << 8)	/* Nonremovable e.g. eMMC */
+#define MMC_CAP_WAIT_WHILE_BUSY	(1 << 9)	/* Waits while card is busy */
+#define MMC_CAP_ERASE		(1 << 10)	/* Allow erase/trim commands */
+#define MMC_CAP_1_8V_DDR	(1 << 11)	/* can support */
+						/* DDR mode at 1.8V */
+#define MMC_CAP_1_2V_DDR	(1 << 12)	/* can support */
+						/* DDR mode at 1.2V */
+#define MMC_CAP_POWER_OFF_CARD	(1 << 13)	/* Can power off after boot */
+#define MMC_CAP_BUS_WIDTH_TEST	(1 << 14)	/* CMD14/CMD19 bus width ok */
+#define MMC_CAP_UHS_SDR12	(1 << 15)	/* Host supports UHS SDR12 mode */
+#define MMC_CAP_UHS_SDR25	(1 << 16)	/* Host supports UHS SDR25 mode */
+#define MMC_CAP_UHS_SDR50	(1 << 17)	/* Host supports UHS SDR50 mode */
+#define MMC_CAP_UHS_SDR104	(1 << 18)	/* Host supports UHS SDR104 mode */
+#define MMC_CAP_UHS_DDR50	(1 << 19)	/* Host supports UHS DDR50 mode */
+#define MMC_CAP_SET_XPC_330	(1 << 20)	/* Host supports >150mA current at 3.3V */
+#define MMC_CAP_SET_XPC_300	(1 << 21)	/* Host supports >150mA current at 3.0V */
+#define MMC_CAP_SET_XPC_180	(1 << 22)	/* Host supports >150mA current at 1.8V */
+#define MMC_CAP_DRIVER_TYPE_A	(1 << 23)	/* Host supports Driver Type A */
+#define MMC_CAP_DRIVER_TYPE_C	(1 << 24)	/* Host supports Driver Type C */
+#define MMC_CAP_DRIVER_TYPE_D	(1 << 25)	/* Host supports Driver Type D */
+#define MMC_CAP_MAX_CURRENT_200	(1 << 26)	/* Host max current limit is 200mA */
+#define MMC_CAP_MAX_CURRENT_400	(1 << 27)	/* Host max current limit is 400mA */
+#define MMC_CAP_MAX_CURRENT_600	(1 << 28)	/* Host max current limit is 600mA */
+#define MMC_CAP_MAX_CURRENT_800	(1 << 29)	/* Host max current limit is 800mA */
+#define MMC_CAP_CMD23		(1 << 30)	/* CMD23 supported. */
+#define MMC_CAP_HW_RESET	(1 << 31)	/* Hardware reset */
+
+	unsigned int		caps2;		/* More host capabilities */
+
+#define MMC_CAP2_BOOTPART_NOACC	(1 << 0)	/* Boot partition no access */
+#define MMC_CAP2_CACHE_CTRL	(1 << 1)	/* Allow cache control */
+#define MMC_CAP2_POWEROFF_NOTIFY (1 << 2)	/* Notify poweroff supported */
+#define MMC_CAP2_NO_MULTI_READ	(1 << 3)	/* Multiblock reads don't work */
+#define MMC_CAP2_NO_SLEEP_CMD	(1 << 4)	/* Don't allow sleep command */
+#define MMC_CAP2_HS200_1_8V_SDR	(1 << 5)        /* can support */
+#define MMC_CAP2_HS200_1_2V_SDR	(1 << 6)        /* can support */
+#define MMC_CAP2_HS200		(MMC_CAP2_HS200_1_8V_SDR | \
+				 MMC_CAP2_HS200_1_2V_SDR)
+#define MMC_CAP2_BROKEN_VOLTAGE	(1 << 7)	/* Use the broken voltage */
+#define MMC_CAP2_DETECT_ON_ERR	(1 << 8)	/* On I/O err check card removal */
+#define MMC_CAP2_HC_ERASE_SZ	(1 << 9)	/* High-capacity erase size */
+
+	mmc_pm_flag_t		pm_caps;	/* supported pm features */
+	unsigned int        power_notify_type;
+#define MMC_HOST_PW_NOTIFY_NONE		0
+#define MMC_HOST_PW_NOTIFY_SHORT	1
+#define MMC_HOST_PW_NOTIFY_LONG		2
+
+#ifdef CONFIG_MMC_CLKGATE
+	int			clk_requests;	/* internal reference counter */
+	unsigned int		clk_delay;	/* number of MCI clk hold cycles */
+	bool			clk_gated;	/* clock gated */
+	struct delayed_work	clk_gate_work; /* delayed clock gate */
+	unsigned int		clk_old;	/* old clock value cache */
+	spinlock_t		clk_lock;	/* lock for clk fields */
+	struct mutex		clk_gate_mutex;	/* mutex for clock gating */
+	struct device_attribute clkgate_delay_attr;
+	unsigned long           clkgate_delay;
+#endif
+
+	/* host specific block data */
+	unsigned int		max_seg_size;	/* see blk_queue_max_segment_size */
+	unsigned short		max_segs;	/* see blk_queue_max_segments */
+	unsigned short		unused;
+	unsigned int		max_req_size;	/* maximum number of bytes in one req */
+	unsigned int		max_blk_size;	/* maximum size of one mmc block */
+	unsigned int		max_blk_count;	/* maximum number of blocks in one req */
+	unsigned int		max_discard_to;	/* max. discard timeout in ms */
+
+	/* private data */
+	spinlock_t		lock;		/* lock for claim and bus ops */
+
+	struct mmc_ios		ios;		/* current io bus settings */
+	u32			ocr;		/* the current OCR setting */
+
+	/* group bitfields together to minimize padding */
+	unsigned int		use_spi_crc:1;
+	unsigned int		claimed:1;	/* host exclusively claimed */
+	unsigned int		bus_dead:1;	/* bus has been released */
+#ifdef CONFIG_MMC_DEBUG
+	unsigned int		removed:1;	/* host is being removed */
+#endif
+
+	int			rescan_disable;	/* disable card detection */
+
+	struct mmc_card		*card;		/* device attached to this host */
+
+	wait_queue_head_t	wq;
+	struct task_struct	*claimer;	/* task that has host claimed */
+	int			claim_cnt;	/* "claim" nesting count */
+
+	struct delayed_work	detect;
+	struct wake_lock	detect_wake_lock;
+	int			detect_change;	/* card detect flag */
+	struct mmc_hotplug	hotplug;
+
+	const struct mmc_bus_ops *bus_ops;	/* current bus driver */
+	unsigned int		bus_refs;	/* reference counter */
+
+	unsigned int		bus_resume_flags;
+#define MMC_BUSRESUME_MANUAL_RESUME	(1 << 0)
+#define MMC_BUSRESUME_NEEDS_RESUME	(1 << 1)
+
+	unsigned int		sdio_irqs;
+	struct task_struct	*sdio_irq_thread;
+	bool			sdio_irq_pending;
+	atomic_t		sdio_irq_thread_abort;
+
+	mmc_pm_flag_t		pm_flags;	/* requested pm features */
+
+#ifdef CONFIG_LEDS_TRIGGERS
+	struct led_trigger	*led;		/* activity led */
+#endif
+
+#ifdef CONFIG_REGULATOR
+	bool			regulator_enabled; /* regulator state */
+#endif
+
+	struct dentry		*debugfs_root;
+
+	struct mmc_async_req	*areq;		/* active async req */
+
+#ifdef CONFIG_FAIL_MMC_REQUEST
+	struct fault_attr	fail_mmc_request;
+#endif
+
+	unsigned int		actual_clock;	/* Actual HC clock rate */
+
+#ifdef CONFIG_MMC_EMBEDDED_SDIO
+	struct {
+		struct sdio_cis			*cis;
+		struct sdio_cccr		*cccr;
+		struct sdio_embedded_func	*funcs;
+		int				num_funcs;
+	} embedded_sdio_data;
+#endif
+
+#ifdef CONFIG_MMC_UNSAFE_RESUME
+	/* Use to record if the card attath staus change in suspend mode*/
+	int card_attath_status;
+
+#define card_attach_status_change 1
+#define card_attach_status_unchange 0
+#endif
+	/*Use to enable scan retry when request or cmd fail*/
+	int scan_retry;
+	bool card_scan_status; /*use to record if the card scan have done and card init OK 0:fail 1:OK*/
+	struct semaphore req_sema; /*use to handle request asynchronous, to prevent issue command in the same time*/
+	int wmt_host_index; /*use to identify the host number*/
+
+	unsigned long		private[0] ____cacheline_aligned;
+};
+
+extern struct mmc_host *mmc_alloc_host(int extra, struct device *);
+extern int mmc_add_host(struct mmc_host *, bool);
+extern void mmc_remove_host(struct mmc_host *);
+extern void mmc_free_host(struct mmc_host *);
+
+#ifdef CONFIG_MMC_EMBEDDED_SDIO
+extern void mmc_set_embedded_sdio_data(struct mmc_host *host,
+				       struct sdio_cis *cis,
+				       struct sdio_cccr *cccr,
+				       struct sdio_embedded_func *funcs,
+				       int num_funcs);
+#endif
+
+static inline void *mmc_priv(struct mmc_host *host)
+{
+	return (void *)host->private;
+}
+
+#define mmc_host_is_spi(host)	((host)->caps & MMC_CAP_SPI)
+
+#define mmc_dev(x)	((x)->parent)
+#define mmc_classdev(x)	(&(x)->class_dev)
+#define mmc_hostname(x)	(dev_name(&(x)->class_dev))
+#define mmc_bus_needs_resume(host) ((host)->bus_resume_flags & MMC_BUSRESUME_NEEDS_RESUME)
+#define mmc_bus_manual_resume(host) ((host)->bus_resume_flags & MMC_BUSRESUME_MANUAL_RESUME)
+
+static inline void mmc_set_bus_resume_policy(struct mmc_host *host, int manual)
+{
+	if (manual)
+		host->bus_resume_flags |= MMC_BUSRESUME_MANUAL_RESUME;
+	else
+		host->bus_resume_flags &= ~MMC_BUSRESUME_MANUAL_RESUME;
+}
+
+extern int mmc_resume_bus(struct mmc_host *host);
+
+extern int mmc_suspend_host(struct mmc_host *);
+extern int mmc_resume_host(struct mmc_host *);
+
+extern int mmc_power_save_host(struct mmc_host *host);
+extern int mmc_power_restore_host(struct mmc_host *host);
+
+extern void mmc_detect_change(struct mmc_host *, unsigned long delay);
+extern void mmc_request_done(struct mmc_host *, struct mmc_request *);
+extern void mmc_force_remove_card(struct mmc_host *host);
+
+extern int mmc_cache_ctrl(struct mmc_host *, u8);
+
+static inline void mmc_signal_sdio_irq(struct mmc_host *host)
+{
+	host->ops->enable_sdio_irq(host, 0);
+	host->sdio_irq_pending = true;
+	wake_up_process(host->sdio_irq_thread);
+}
+
+struct regulator;
+
+#ifdef CONFIG_REGULATOR
+int mmc_regulator_get_ocrmask(struct regulator *supply);
+int mmc_regulator_set_ocr(struct mmc_host *mmc,
+			struct regulator *supply,
+			unsigned short vdd_bit);
+#else
+static inline int mmc_regulator_get_ocrmask(struct regulator *supply)
+{
+	return 0;
+}
+
+static inline int mmc_regulator_set_ocr(struct mmc_host *mmc,
+				 struct regulator *supply,
+				 unsigned short vdd_bit)
+{
+	return 0;
+}
+#endif
+
+int mmc_card_awake(struct mmc_host *host);
+int mmc_card_sleep(struct mmc_host *host);
+int mmc_card_can_sleep(struct mmc_host *host);
+
+int mmc_pm_notify(struct notifier_block *notify_block, unsigned long, void *);
+
+/* Module parameter */
+extern bool mmc_assume_removable;
+
+static inline int mmc_card_is_removable(struct mmc_host *host)
+{
+	return !(host->caps & MMC_CAP_NONREMOVABLE) && mmc_assume_removable;
+}
+
+static inline int mmc_card_keep_power(struct mmc_host *host)
+{
+	return host->pm_flags & MMC_PM_KEEP_POWER;
+}
+
+static inline int mmc_card_wake_sdio_irq(struct mmc_host *host)
+{
+	return host->pm_flags & MMC_PM_WAKE_SDIO_IRQ;
+}
+
+static inline int mmc_host_cmd23(struct mmc_host *host)
+{
+	return host->caps & MMC_CAP_CMD23;
+}
+
+static inline int mmc_boot_partition_access(struct mmc_host *host)
+{
+	return !(host->caps2 & MMC_CAP2_BOOTPART_NOACC);
+}
+
+#ifdef CONFIG_MMC_CLKGATE
+void mmc_host_clk_hold(struct mmc_host *host);
+void mmc_host_clk_release(struct mmc_host *host);
+unsigned int mmc_host_clk_rate(struct mmc_host *host);
+
+#else
+static inline void mmc_host_clk_hold(struct mmc_host *host)
+{
+}
+
+static inline void mmc_host_clk_release(struct mmc_host *host)
+{
+}
+
+static inline unsigned int mmc_host_clk_rate(struct mmc_host *host)
+{
+	return host->ios.clock;
+}
+#endif
+#endif /* LINUX_MMC_HOST_H */
diff --git a/include/linux/mmc/ioctl.h b/include/linux/mmc/ioctl.h
new file mode 100644
index 00000000..1f5e6892
--- /dev/null
+++ b/include/linux/mmc/ioctl.h
@@ -0,0 +1,57 @@
+#ifndef LINUX_MMC_IOCTL_H
+#define LINUX_MMC_IOCTL_H
+
+#include <linux/types.h>
+
+struct mmc_ioc_cmd {
+	/* Implies direction of data.  true = write, false = read */
+	int write_flag;
+
+	/* Application-specific command.  true = precede with CMD55 */
+	int is_acmd;
+
+	__u32 opcode;
+	__u32 arg;
+	__u32 response[4];  /* CMD response */
+	unsigned int flags;
+	unsigned int blksz;
+	unsigned int blocks;
+
+	/*
+	 * Sleep at least postsleep_min_us useconds, and at most
+	 * postsleep_max_us useconds *after* issuing command.  Needed for
+	 * some read commands for which cards have no other way of indicating
+	 * they're ready for the next command (i.e. there is no equivalent of
+	 * a "busy" indicator for read operations).
+	 */
+	unsigned int postsleep_min_us;
+	unsigned int postsleep_max_us;
+
+	/*
+	 * Override driver-computed timeouts.  Note the difference in units!
+	 */
+	unsigned int data_timeout_ns;
+	unsigned int cmd_timeout_ms;
+
+	/*
+	 * For 64-bit machines, the next member, ``__u64 data_ptr``, wants to
+	 * be 8-byte aligned.  Make sure this struct is the same size when
+	 * built for 32-bit.
+	 */
+	__u32 __pad;
+
+	/* DAT buffer */
+	__u64 data_ptr;
+};
+#define mmc_ioc_cmd_set_data(ic, ptr) ic.data_ptr = (__u64)(unsigned long) ptr
+
+#define MMC_IOC_CMD _IOWR(MMC_BLOCK_MAJOR, 0, struct mmc_ioc_cmd)
+
+/*
+ * Since this ioctl is only meant to enhance (and not replace) normal access
+ * to the mmc bus device, an upper data transfer limit of MMC_IOC_MAX_BYTES
+ * is enforced per ioctl call.  For larger data transfers, use the normal
+ * block device operations.
+ */
+#define MMC_IOC_MAX_BYTES  (512L * 256)
+#endif /* LINUX_MMC_IOCTL_H */
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
new file mode 100644
index 00000000..b822a2cb
--- /dev/null
+++ b/include/linux/mmc/mmc.h
@@ -0,0 +1,449 @@
+/*
+ * Header for MultiMediaCard (MMC)
+ *
+ * Copyright 2002 Hewlett-Packard Company
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ * HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Many thanks to Alessandro Rubini and Jonathan Corbet!
+ *
+ * Based strongly on code by:
+ *
+ * Author: Yong-iL Joh <tolkien@mizi.com>
+ *
+ * Author:  Andrew Christian
+ *          15 May 2002
+ */
+
+#ifndef LINUX_MMC_MMC_H
+#define LINUX_MMC_MMC_H
+
+/* Standard MMC commands (4.1)           type  argument     response */
+   /* class 1 */
+#define MMC_GO_IDLE_STATE         0   /* bc                          */
+#define MMC_SEND_OP_COND          1   /* bcr  [31:0] OCR         R3  */
+#define MMC_ALL_SEND_CID          2   /* bcr                     R2  */
+#define MMC_SET_RELATIVE_ADDR     3   /* ac   [31:16] RCA        R1  */
+#define MMC_SET_DSR               4   /* bc   [31:16] RCA            */
+#define MMC_SLEEP_AWAKE		  5   /* ac   [31:16] RCA 15:flg R1b */
+#define MMC_SWITCH                6   /* ac   [31:0] See below   R1b */
+#define MMC_SELECT_CARD           7   /* ac   [31:16] RCA        R1  */
+#define MMC_SEND_EXT_CSD          8   /* adtc                    R1  */
+#define MMC_SEND_CSD              9   /* ac   [31:16] RCA        R2  */
+#define MMC_SEND_CID             10   /* ac   [31:16] RCA        R2  */
+#define MMC_READ_DAT_UNTIL_STOP  11   /* adtc [31:0] dadr        R1  */
+#define MMC_STOP_TRANSMISSION    12   /* ac                      R1b */
+#define MMC_SEND_STATUS          13   /* ac   [31:16] RCA        R1  */
+#define MMC_BUS_TEST_R           14   /* adtc                    R1  */
+#define MMC_GO_INACTIVE_STATE    15   /* ac   [31:16] RCA            */
+#define MMC_BUS_TEST_W           19   /* adtc                    R1  */
+#define MMC_SPI_READ_OCR         58   /* spi                  spi_R3 */
+#define MMC_SPI_CRC_ON_OFF       59   /* spi  [0:0] flag      spi_R1 */
+
+  /* class 2 */
+#define MMC_SET_BLOCKLEN         16   /* ac   [31:0] block len   R1  */
+#define MMC_READ_SINGLE_BLOCK    17   /* adtc [31:0] data addr   R1  */
+#define MMC_READ_MULTIPLE_BLOCK  18   /* adtc [31:0] data addr   R1  */
+#define MMC_SEND_TUNING_BLOCK    19   /* adtc                    R1  */
+#define MMC_SEND_TUNING_BLOCK_HS200	21	/* adtc R1  */
+
+  /* class 3 */
+#define MMC_WRITE_DAT_UNTIL_STOP 20   /* adtc [31:0] data addr   R1  */
+
+  /* class 4 */
+#define MMC_SET_BLOCK_COUNT      23   /* adtc [31:0] data addr   R1  */
+#define MMC_WRITE_BLOCK          24   /* adtc [31:0] data addr   R1  */
+#define MMC_WRITE_MULTIPLE_BLOCK 25   /* adtc                    R1  */
+#define MMC_PROGRAM_CID          26   /* adtc                    R1  */
+#define MMC_PROGRAM_CSD          27   /* adtc                    R1  */
+
+  /* class 6 */
+#define MMC_SET_WRITE_PROT       28   /* ac   [31:0] data addr   R1b */
+#define MMC_CLR_WRITE_PROT       29   /* ac   [31:0] data addr   R1b */
+#define MMC_SEND_WRITE_PROT      30   /* adtc [31:0] wpdata addr R1  */
+
+  /* class 5 */
+#define MMC_ERASE_GROUP_START    35   /* ac   [31:0] data addr   R1  */
+#define MMC_ERASE_GROUP_END      36   /* ac   [31:0] data addr   R1  */
+#define MMC_ERASE                38   /* ac                      R1b */
+
+  /* class 9 */
+#define MMC_FAST_IO              39   /* ac   <Complex>          R4  */
+#define MMC_GO_IRQ_STATE         40   /* bcr                     R5  */
+
+  /* class 7 */
+#define MMC_LOCK_UNLOCK          42   /* adtc                    R1b */
+
+  /* class 8 */
+#define MMC_APP_CMD              55   /* ac   [31:16] RCA        R1  */
+#define MMC_GEN_CMD              56   /* adtc [0] RD/WR          R1  */
+
+static inline bool mmc_op_multi(u32 opcode)
+{
+	return opcode == MMC_WRITE_MULTIPLE_BLOCK ||
+	       opcode == MMC_READ_MULTIPLE_BLOCK;
+}
+
+/*
+ * MMC_SWITCH argument format:
+ *
+ *	[31:26] Always 0
+ *	[25:24] Access Mode
+ *	[23:16] Location of target Byte in EXT_CSD
+ *	[15:08] Value Byte
+ *	[07:03] Always 0
+ *	[02:00] Command Set
+ */
+
+/*
+  MMC status in R1, for native mode (SPI bits are different)
+  Type
+	e : error bit
+	s : status bit
+	r : detected and set for the actual command response
+	x : detected and set during command execution. the host must poll
+            the card by sending status command in order to read these bits.
+  Clear condition
+	a : according to the card state
+	b : always related to the previous command. Reception of
+            a valid command will clear it (with a delay of one command)
+	c : clear by read
+ */
+
+#define R1_OUT_OF_RANGE		(1 << 31)	/* er, c */
+#define R1_ADDRESS_ERROR	(1 << 30)	/* erx, c */
+#define R1_BLOCK_LEN_ERROR	(1 << 29)	/* er, c */
+#define R1_ERASE_SEQ_ERROR      (1 << 28)	/* er, c */
+#define R1_ERASE_PARAM		(1 << 27)	/* ex, c */
+#define R1_WP_VIOLATION		(1 << 26)	/* erx, c */
+#define R1_CARD_IS_LOCKED	(1 << 25)	/* sx, a */
+#define R1_LOCK_UNLOCK_FAILED	(1 << 24)	/* erx, c */
+#define R1_COM_CRC_ERROR	(1 << 23)	/* er, b */
+#define R1_ILLEGAL_COMMAND	(1 << 22)	/* er, b */
+#define R1_CARD_ECC_FAILED	(1 << 21)	/* ex, c */
+#define R1_CC_ERROR		(1 << 20)	/* erx, c */
+#define R1_ERROR		(1 << 19)	/* erx, c */
+#define R1_UNDERRUN		(1 << 18)	/* ex, c */
+#define R1_OVERRUN		(1 << 17)	/* ex, c */
+#define R1_CID_CSD_OVERWRITE	(1 << 16)	/* erx, c, CID/CSD overwrite */
+#define R1_WP_ERASE_SKIP	(1 << 15)	/* sx, c */
+#define R1_CARD_ECC_DISABLED	(1 << 14)	/* sx, a */
+#define R1_ERASE_RESET		(1 << 13)	/* sr, c */
+#define R1_STATUS(x)            (x & 0xFFFFE000)
+#define R1_CURRENT_STATE(x)	((x & 0x00001E00) >> 9)	/* sx, b (4 bits) */
+#define R1_READY_FOR_DATA	(1 << 8)	/* sx, a */
+#define R1_SWITCH_ERROR		(1 << 7)	/* sx, c */
+#define R1_APP_CMD		(1 << 5)	/* sr, c */
+
+#define R1_STATE_IDLE	0
+#define R1_STATE_READY	1
+#define R1_STATE_IDENT	2
+#define R1_STATE_STBY	3
+#define R1_STATE_TRAN	4
+#define R1_STATE_DATA	5
+#define R1_STATE_RCV	6
+#define R1_STATE_PRG	7
+#define R1_STATE_DIS	8
+
+/*
+ * MMC/SD in SPI mode reports R1 status always, and R2 for SEND_STATUS
+ * R1 is the low order byte; R2 is the next highest byte, when present.
+ */
+#define R1_SPI_IDLE		(1 << 0)
+#define R1_SPI_ERASE_RESET	(1 << 1)
+#define R1_SPI_ILLEGAL_COMMAND	(1 << 2)
+#define R1_SPI_COM_CRC		(1 << 3)
+#define R1_SPI_ERASE_SEQ	(1 << 4)
+#define R1_SPI_ADDRESS		(1 << 5)
+#define R1_SPI_PARAMETER	(1 << 6)
+/* R1 bit 7 is always zero */
+#define R2_SPI_CARD_LOCKED	(1 << 8)
+#define R2_SPI_WP_ERASE_SKIP	(1 << 9)	/* or lock/unlock fail */
+#define R2_SPI_LOCK_UNLOCK_FAIL	R2_SPI_WP_ERASE_SKIP
+#define R2_SPI_ERROR		(1 << 10)
+#define R2_SPI_CC_ERROR		(1 << 11)
+#define R2_SPI_CARD_ECC_ERROR	(1 << 12)
+#define R2_SPI_WP_VIOLATION	(1 << 13)
+#define R2_SPI_ERASE_PARAM	(1 << 14)
+#define R2_SPI_OUT_OF_RANGE	(1 << 15)	/* or CSD overwrite */
+#define R2_SPI_CSD_OVERWRITE	R2_SPI_OUT_OF_RANGE
+
+/* These are unpacked versions of the actual responses */
+
+struct _mmc_csd {
+	u8  csd_structure;
+	u8  spec_vers;
+	u8  taac;
+	u8  nsac;
+	u8  tran_speed;
+	u16 ccc;
+	u8  read_bl_len;
+	u8  read_bl_partial;
+	u8  write_blk_misalign;
+	u8  read_blk_misalign;
+	u8  dsr_imp;
+	u16 c_size;
+	u8  vdd_r_curr_min;
+	u8  vdd_r_curr_max;
+	u8  vdd_w_curr_min;
+	u8  vdd_w_curr_max;
+	u8  c_size_mult;
+	union {
+		struct { /* MMC system specification version 3.1 */
+			u8  erase_grp_size;
+			u8  erase_grp_mult;
+		} v31;
+		struct { /* MMC system specification version 2.2 */
+			u8  sector_size;
+			u8  erase_grp_size;
+		} v22;
+	} erase;
+	u8  wp_grp_size;
+	u8  wp_grp_enable;
+	u8  default_ecc;
+	u8  r2w_factor;
+	u8  write_bl_len;
+	u8  write_bl_partial;
+	u8  file_format_grp;
+	u8  copy;
+	u8  perm_write_protect;
+	u8  tmp_write_protect;
+	u8  file_format;
+	u8  ecc;
+};
+
+/*
+ * OCR bits are mostly in host.h
+ */
+#define MMC_CARD_BUSY	0x80000000	/* Card Power up status bit */
+
+/*
+ * Card Command Classes (CCC)
+ */
+#define CCC_BASIC		(1<<0)	/* (0) Basic protocol functions */
+					/* (CMD0,1,2,3,4,7,9,10,12,13,15) */
+					/* (and for SPI, CMD58,59) */
+#define CCC_STREAM_READ		(1<<1)	/* (1) Stream read commands */
+					/* (CMD11) */
+#define CCC_BLOCK_READ		(1<<2)	/* (2) Block read commands */
+					/* (CMD16,17,18) */
+#define CCC_STREAM_WRITE	(1<<3)	/* (3) Stream write commands */
+					/* (CMD20) */
+#define CCC_BLOCK_WRITE		(1<<4)	/* (4) Block write commands */
+					/* (CMD16,24,25,26,27) */
+#define CCC_ERASE		(1<<5)	/* (5) Ability to erase blocks */
+					/* (CMD32,33,34,35,36,37,38,39) */
+#define CCC_WRITE_PROT		(1<<6)	/* (6) Able to write protect blocks */
+					/* (CMD28,29,30) */
+#define CCC_LOCK_CARD		(1<<7)	/* (7) Able to lock down card */
+					/* (CMD16,CMD42) */
+#define CCC_APP_SPEC		(1<<8)	/* (8) Application specific */
+					/* (CMD55,56,57,ACMD*) */
+#define CCC_IO_MODE		(1<<9)	/* (9) I/O mode */
+					/* (CMD5,39,40,52,53) */
+#define CCC_SWITCH		(1<<10)	/* (10) High speed switch */
+					/* (CMD6,34,35,36,37,50) */
+					/* (11) Reserved */
+					/* (CMD?) */
+
+/*
+ * CSD field definitions
+ */
+
+#define CSD_STRUCT_VER_1_0  0           /* Valid for system specification 1.0 - 1.2 */
+#define CSD_STRUCT_VER_1_1  1           /* Valid for system specification 1.4 - 2.2 */
+#define CSD_STRUCT_VER_1_2  2           /* Valid for system specification 3.1 - 3.2 - 3.31 - 4.0 - 4.1 */
+#define CSD_STRUCT_EXT_CSD  3           /* Version is coded in CSD_STRUCTURE in EXT_CSD */
+
+#define CSD_SPEC_VER_0      0           /* Implements system specification 1.0 - 1.2 */
+#define CSD_SPEC_VER_1      1           /* Implements system specification 1.4 */
+#define CSD_SPEC_VER_2      2           /* Implements system specification 2.0 - 2.2 */
+#define CSD_SPEC_VER_3      3           /* Implements system specification 3.1 - 3.2 - 3.31 */
+#define CSD_SPEC_VER_4      4           /* Implements system specification 4.0 - 4.1 */
+
+/*
+ * EXT_CSD fields
+ */
+
+#define EXT_CSD_FLUSH_CACHE		32      /* W */
+#define EXT_CSD_CACHE_CTRL		33      /* R/W */
+#define EXT_CSD_POWER_OFF_NOTIFICATION	34	/* R/W */
+#define EXT_CSD_DATA_SECTOR_SIZE	61	/* R */
+#define EXT_CSD_GP_SIZE_MULT		143	/* R/W */
+#define EXT_CSD_PARTITION_ATTRIBUTE	156	/* R/W */
+#define EXT_CSD_PARTITION_SUPPORT	160	/* RO */
+#define EXT_CSD_HPI_MGMT		161	/* R/W */
+#define EXT_CSD_RST_N_FUNCTION		162	/* R/W */
+#define EXT_CSD_SANITIZE_START		165     /* W */
+#define EXT_CSD_WR_REL_PARAM		166	/* RO */
+#define EXT_CSD_BOOT_WP			173	/* R/W */
+#define EXT_CSD_ERASE_GROUP_DEF		175	/* R/W */
+#define EXT_CSD_PART_CONFIG		179	/* R/W */
+#define EXT_CSD_ERASED_MEM_CONT		181	/* RO */
+#define EXT_CSD_BUS_WIDTH		183	/* R/W */
+#define EXT_CSD_HS_TIMING		185	/* R/W */
+#define EXT_CSD_POWER_CLASS		187	/* R/W */
+#define EXT_CSD_REV			192	/* RO */
+#define EXT_CSD_STRUCTURE		194	/* RO */
+#define EXT_CSD_CARD_TYPE		196	/* RO */
+#define EXT_CSD_OUT_OF_INTERRUPT_TIME	198	/* RO */
+#define EXT_CSD_PART_SWITCH_TIME        199     /* RO */
+#define EXT_CSD_PWR_CL_52_195		200	/* RO */
+#define EXT_CSD_PWR_CL_26_195		201	/* RO */
+#define EXT_CSD_PWR_CL_52_360		202	/* RO */
+#define EXT_CSD_PWR_CL_26_360		203	/* RO */
+#define EXT_CSD_SEC_CNT			212	/* RO, 4 bytes */
+#define EXT_CSD_S_A_TIMEOUT		217	/* RO */
+#define EXT_CSD_REL_WR_SEC_C		222	/* RO */
+#define EXT_CSD_HC_WP_GRP_SIZE		221	/* RO */
+#define EXT_CSD_ERASE_TIMEOUT_MULT	223	/* RO */
+#define EXT_CSD_HC_ERASE_GRP_SIZE	224	/* RO */
+#define EXT_CSD_BOOT_MULT		226	/* RO */
+#define EXT_CSD_SEC_TRIM_MULT		229	/* RO */
+#define EXT_CSD_SEC_ERASE_MULT		230	/* RO */
+#define EXT_CSD_SEC_FEATURE_SUPPORT	231	/* RO */
+#define EXT_CSD_TRIM_MULT		232	/* RO */
+#define EXT_CSD_PWR_CL_200_195		236	/* RO */
+#define EXT_CSD_PWR_CL_200_360		237	/* RO */
+#define EXT_CSD_PWR_CL_DDR_52_195	238	/* RO */
+#define EXT_CSD_PWR_CL_DDR_52_360	239	/* RO */
+#define EXT_CSD_POWER_OFF_LONG_TIME	247	/* RO */
+#define EXT_CSD_GENERIC_CMD6_TIME	248	/* RO */
+#define EXT_CSD_CACHE_SIZE		249	/* RO, 4 bytes */
+#define EXT_CSD_TAG_UNIT_SIZE		498	/* RO */
+#define EXT_CSD_DATA_TAG_SUPPORT	499	/* RO */
+#define EXT_CSD_HPI_FEATURES		503	/* RO */
+
+/*
+ * EXT_CSD field definitions
+ */
+
+#define EXT_CSD_WR_REL_PARAM_EN		(1<<2)
+
+#define EXT_CSD_BOOT_WP_B_PWR_WP_DIS	(0x40)
+#define EXT_CSD_BOOT_WP_B_PERM_WP_DIS	(0x10)
+#define EXT_CSD_BOOT_WP_B_PERM_WP_EN	(0x04)
+#define EXT_CSD_BOOT_WP_B_PWR_WP_EN	(0x01)
+
+#define EXT_CSD_PART_CONFIG_ACC_MASK	(0x7)
+#define EXT_CSD_PART_CONFIG_ACC_BOOT0	(0x1)
+#define EXT_CSD_PART_CONFIG_ACC_GP0	(0x4)
+
+#define EXT_CSD_PART_SUPPORT_PART_EN	(0x1)
+
+#define EXT_CSD_CMD_SET_NORMAL		(1<<0)
+#define EXT_CSD_CMD_SET_SECURE		(1<<1)
+#define EXT_CSD_CMD_SET_CPSECURE	(1<<2)
+
+#define EXT_CSD_CARD_TYPE_26	(1<<0)	/* Card can run at 26MHz */
+#define EXT_CSD_CARD_TYPE_52	(1<<1)	/* Card can run at 52MHz */
+#define EXT_CSD_CARD_TYPE_MASK	0x3F	/* Mask out reserved bits */
+#define EXT_CSD_CARD_TYPE_DDR_1_8V  (1<<2)   /* Card can run at 52MHz */
+					     /* DDR mode @1.8V or 3V I/O */
+#define EXT_CSD_CARD_TYPE_DDR_1_2V  (1<<3)   /* Card can run at 52MHz */
+					     /* DDR mode @1.2V I/O */
+#define EXT_CSD_CARD_TYPE_DDR_52       (EXT_CSD_CARD_TYPE_DDR_1_8V  \
+					| EXT_CSD_CARD_TYPE_DDR_1_2V)
+#define EXT_CSD_CARD_TYPE_SDR_1_8V	(1<<4)	/* Card can run at 200MHz */
+#define EXT_CSD_CARD_TYPE_SDR_1_2V	(1<<5)	/* Card can run at 200MHz */
+						/* SDR mode @1.2V I/O */
+
+#define EXT_CSD_CARD_TYPE_SDR_200	(EXT_CSD_CARD_TYPE_SDR_1_8V | \
+					 EXT_CSD_CARD_TYPE_SDR_1_2V)
+
+#define EXT_CSD_CARD_TYPE_SDR_ALL	(EXT_CSD_CARD_TYPE_SDR_200 | \
+					 EXT_CSD_CARD_TYPE_52 | \
+					 EXT_CSD_CARD_TYPE_26)
+
+#define	EXT_CSD_CARD_TYPE_SDR_1_2V_ALL	(EXT_CSD_CARD_TYPE_SDR_1_2V | \
+					 EXT_CSD_CARD_TYPE_52 | \
+					 EXT_CSD_CARD_TYPE_26)
+
+#define	EXT_CSD_CARD_TYPE_SDR_1_8V_ALL	(EXT_CSD_CARD_TYPE_SDR_1_8V | \
+					 EXT_CSD_CARD_TYPE_52 | \
+					 EXT_CSD_CARD_TYPE_26)
+
+#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_8V	(EXT_CSD_CARD_TYPE_SDR_1_2V | \
+						 EXT_CSD_CARD_TYPE_DDR_1_8V | \
+						 EXT_CSD_CARD_TYPE_52 | \
+						 EXT_CSD_CARD_TYPE_26)
+
+#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_8V	(EXT_CSD_CARD_TYPE_SDR_1_8V | \
+						 EXT_CSD_CARD_TYPE_DDR_1_8V | \
+						 EXT_CSD_CARD_TYPE_52 | \
+						 EXT_CSD_CARD_TYPE_26)
+
+#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_2V	(EXT_CSD_CARD_TYPE_SDR_1_2V | \
+						 EXT_CSD_CARD_TYPE_DDR_1_2V | \
+						 EXT_CSD_CARD_TYPE_52 | \
+						 EXT_CSD_CARD_TYPE_26)
+
+#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_2V	(EXT_CSD_CARD_TYPE_SDR_1_8V | \
+						 EXT_CSD_CARD_TYPE_DDR_1_2V | \
+						 EXT_CSD_CARD_TYPE_52 | \
+						 EXT_CSD_CARD_TYPE_26)
+
+#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_52	(EXT_CSD_CARD_TYPE_SDR_1_2V | \
+						 EXT_CSD_CARD_TYPE_DDR_52 | \
+						 EXT_CSD_CARD_TYPE_52 | \
+						 EXT_CSD_CARD_TYPE_26)
+
+#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_52	(EXT_CSD_CARD_TYPE_SDR_1_8V | \
+						 EXT_CSD_CARD_TYPE_DDR_52 | \
+						 EXT_CSD_CARD_TYPE_52 | \
+						 EXT_CSD_CARD_TYPE_26)
+
+#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_8V	(EXT_CSD_CARD_TYPE_SDR_200 | \
+						 EXT_CSD_CARD_TYPE_DDR_1_8V | \
+						 EXT_CSD_CARD_TYPE_52 | \
+						 EXT_CSD_CARD_TYPE_26)
+
+#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_2V	(EXT_CSD_CARD_TYPE_SDR_200 | \
+						 EXT_CSD_CARD_TYPE_DDR_1_2V | \
+						 EXT_CSD_CARD_TYPE_52 | \
+						 EXT_CSD_CARD_TYPE_26)
+
+#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_52	(EXT_CSD_CARD_TYPE_SDR_200 | \
+						 EXT_CSD_CARD_TYPE_DDR_52 | \
+						 EXT_CSD_CARD_TYPE_52 | \
+						 EXT_CSD_CARD_TYPE_26)
+
+#define EXT_CSD_BUS_WIDTH_1	0	/* Card is in 1 bit mode */
+#define EXT_CSD_BUS_WIDTH_4	1	/* Card is in 4 bit mode */
+#define EXT_CSD_BUS_WIDTH_8	2	/* Card is in 8 bit mode */
+#define EXT_CSD_DDR_BUS_WIDTH_4	5	/* Card is in 4 bit DDR mode */
+#define EXT_CSD_DDR_BUS_WIDTH_8	6	/* Card is in 8 bit DDR mode */
+
+#define EXT_CSD_SEC_ER_EN	BIT(0)
+#define EXT_CSD_SEC_BD_BLK_EN	BIT(2)
+#define EXT_CSD_SEC_GB_CL_EN	BIT(4)
+#define EXT_CSD_SEC_SANITIZE	BIT(6)  /* v4.5 only */
+
+#define EXT_CSD_RST_N_EN_MASK	0x3
+#define EXT_CSD_RST_N_ENABLED	1	/* RST_n is enabled on card */
+
+#define EXT_CSD_NO_POWER_NOTIFICATION	0
+#define EXT_CSD_POWER_ON		1
+#define EXT_CSD_POWER_OFF_SHORT		2
+#define EXT_CSD_POWER_OFF_LONG		3
+
+#define EXT_CSD_PWR_CL_8BIT_MASK	0xF0	/* 8 bit PWR CLS */
+#define EXT_CSD_PWR_CL_4BIT_MASK	0x0F	/* 8 bit PWR CLS */
+#define EXT_CSD_PWR_CL_8BIT_SHIFT	4
+#define EXT_CSD_PWR_CL_4BIT_SHIFT	0
+/*
+ * MMC_SWITCH access modes
+ */
+
+#define MMC_SWITCH_MODE_CMD_SET		0x00	/* Change the command set */
+#define MMC_SWITCH_MODE_SET_BITS	0x01	/* Set bits which are 1 in value */
+#define MMC_SWITCH_MODE_CLEAR_BITS	0x02	/* Clear bits which are 1 in value */
+#define MMC_SWITCH_MODE_WRITE_BYTE	0x03	/* Set target to value */
+
+#endif /* LINUX_MMC_MMC_H */
diff --git a/include/linux/mmc/pm.h b/include/linux/mmc/pm.h
new file mode 100644
index 00000000..6e2d6a13
--- /dev/null
+++ b/include/linux/mmc/pm.h
@@ -0,0 +1,31 @@
+/*
+ * linux/include/linux/mmc/pm.h
+ *
+ * Author:	Nicolas Pitre
+ * Copyright:	(C) 2009 Marvell Technology Group Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef LINUX_MMC_PM_H
+#define LINUX_MMC_PM_H
+
+/*
+ * These flags are used to describe power management features that
+ * some cards (typically SDIO cards) might wish to benefit from when
+ * the host system is being suspended.  There are several layers of
+ * abstractions involved, from the host controller driver, to the MMC core
+ * code, to the SDIO core code, to finally get to the actual SDIO function
+ * driver.  This file is therefore used for common definitions shared across
+ * all those layers.
+ */
+
+typedef unsigned int mmc_pm_flag_t;
+
+#define MMC_PM_KEEP_POWER	(1 << 0)	/* preserve card power during suspend */
+#define MMC_PM_WAKE_SDIO_IRQ	(1 << 1)	/* wake up host system on SDIO IRQ assertion */
+#define MMC_PM_IGNORE_PM_NOTIFY	(1 << 2)	/* ignore mmc pm notify */
+
+#endif /* LINUX_MMC_PM_H */
diff --git a/include/linux/mmc/sd.h b/include/linux/mmc/sd.h
new file mode 100644
index 00000000..1ebcf9ba
--- /dev/null
+++ b/include/linux/mmc/sd.h
@@ -0,0 +1,94 @@
+/*
+ *  include/linux/mmc/sd.h
+ *
+ *  Copyright (C) 2005-2007 Pierre Ossman, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#ifndef LINUX_MMC_SD_H
+#define LINUX_MMC_SD_H
+
+/* SD commands                           type  argument     response */
+  /* class 0 */
+/* This is basically the same command as for MMC with some quirks. */
+#define SD_SEND_RELATIVE_ADDR     3   /* bcr                     R6  */
+#define SD_SEND_IF_COND           8   /* bcr  [11:0] See below   R7  */
+#define SD_SWITCH_VOLTAGE         11  /* ac                      R1  */
+
+  /* class 10 */
+#define SD_SWITCH                 6   /* adtc [31:0] See below   R1  */
+
+  /* class 5 */
+#define SD_ERASE_WR_BLK_START    32   /* ac   [31:0] data addr   R1  */
+#define SD_ERASE_WR_BLK_END      33   /* ac   [31:0] data addr   R1  */
+
+  /* Application commands */
+#define SD_APP_SET_BUS_WIDTH      6   /* ac   [1:0] bus width    R1  */
+#define SD_APP_SD_STATUS         13   /* adtc                    R1  */
+#define SD_APP_SEND_NUM_WR_BLKS  22   /* adtc                    R1  */
+#define SD_APP_OP_COND           41   /* bcr  [31:0] OCR         R3  */
+#define SD_APP_SEND_SCR          51   /* adtc                    R1  */
+
+/* OCR bit definitions */
+#define SD_OCR_S18R		(1 << 24)    /* 1.8V switching request */
+#define SD_ROCR_S18A		SD_OCR_S18R  /* 1.8V switching accepted by card */
+#define SD_OCR_XPC		(1 << 28)    /* SDXC power control */
+#define SD_OCR_CCS		(1 << 30)    /* Card Capacity Status */
+
+/*
+ * SD_SWITCH argument format:
+ *
+ *      [31] Check (0) or switch (1)
+ *      [30:24] Reserved (0)
+ *      [23:20] Function group 6
+ *      [19:16] Function group 5
+ *      [15:12] Function group 4
+ *      [11:8] Function group 3
+ *      [7:4] Function group 2
+ *      [3:0] Function group 1
+ */
+
+/*
+ * SD_SEND_IF_COND argument format:
+ *
+ *	[31:12] Reserved (0)
+ *	[11:8] Host Voltage Supply Flags
+ *	[7:0] Check Pattern (0xAA)
+ */
+
+/*
+ * SCR field definitions
+ */
+
+#define SCR_SPEC_VER_0		0	/* Implements system specification 1.0 - 1.01 */
+#define SCR_SPEC_VER_1		1	/* Implements system specification 1.10 */
+#define SCR_SPEC_VER_2		2	/* Implements system specification 2.00-3.0X */
+
+/*
+ * SD bus widths
+ */
+#define SD_BUS_WIDTH_1		0
+#define SD_BUS_WIDTH_4		2
+
+/*
+ * SD_SWITCH mode
+ */
+#define SD_SWITCH_CHECK		0
+#define SD_SWITCH_SET		1
+
+/*
+ * SD_SWITCH function groups
+ */
+#define SD_SWITCH_GRP_ACCESS	0
+
+/*
+ * SD_SWITCH access modes
+ */
+#define SD_SWITCH_ACCESS_DEF	0
+#define SD_SWITCH_ACCESS_HS	1
+
+#endif /* LINUX_MMC_SD_H */
diff --git a/include/linux/mmc/sdhci-pci-data.h b/include/linux/mmc/sdhci-pci-data.h
new file mode 100644
index 00000000..8959604a
--- /dev/null
+++ b/include/linux/mmc/sdhci-pci-data.h
@@ -0,0 +1,18 @@
+#ifndef LINUX_MMC_SDHCI_PCI_DATA_H
+#define LINUX_MMC_SDHCI_PCI_DATA_H
+
+struct pci_dev;
+
+struct sdhci_pci_data {
+	struct pci_dev	*pdev;
+	int		slotno;
+	int		rst_n_gpio; /* Set to -EINVAL if unused */
+	int		cd_gpio;    /* Set to -EINVAL if unused */
+	int		(*setup)(struct sdhci_pci_data *data);
+	void		(*cleanup)(struct sdhci_pci_data *data);
+};
+
+extern struct sdhci_pci_data *(*sdhci_pci_get_data)(struct pci_dev *pdev,
+				int slotno);
+
+#endif
diff --git a/include/linux/mmc/sdhci-spear.h b/include/linux/mmc/sdhci-spear.h
new file mode 100644
index 00000000..5cdc96da
--- /dev/null
+++ b/include/linux/mmc/sdhci-spear.h
@@ -0,0 +1,42 @@
+/*
+ * include/linux/mmc/sdhci-spear.h
+ *
+ * SDHCI declarations specific to ST SPEAr platform
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef LINUX_MMC_SDHCI_SPEAR_H
+#define LINUX_MMC_SDHCI_SPEAR_H
+
+#include <linux/platform_device.h>
+/*
+ * struct sdhci_plat_data: spear sdhci platform data structure
+ *
+ * @card_power_gpio: gpio pin for enabling/disabling power to sdhci socket
+ * @power_active_high: if set, enable power to sdhci socket by setting
+ *			card_power_gpio
+ * @power_always_enb: If set, then enable power on probe, otherwise enable only
+ *			on card insertion and disable on card removal.
+ * card_int_gpio: gpio pin used for card detection
+ */
+struct sdhci_plat_data {
+	int card_power_gpio;
+	int power_active_high;
+	int power_always_enb;
+	int card_int_gpio;
+};
+
+/* This function is used to set platform_data field of pdev->dev */
+static inline void
+sdhci_set_plat_data(struct platform_device *pdev, struct sdhci_plat_data *data)
+{
+	pdev->dev.platform_data = data;
+}
+
+#endif /* LINUX_MMC_SDHCI_SPEAR_H */
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
new file mode 100644
index 00000000..e9051e1c
--- /dev/null
+++ b/include/linux/mmc/sdhci.h
@@ -0,0 +1,174 @@
+/*
+ *  linux/include/linux/mmc/sdhci.h - Secure Digital Host Controller Interface
+ *
+ *  Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#ifndef LINUX_MMC_SDHCI_H
+#define LINUX_MMC_SDHCI_H
+
+#include <linux/scatterlist.h>
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/mmc/host.h>
+
+struct sdhci_host {
+	/* Data set by hardware interface driver */
+	const char *hw_name;	/* Hardware bus name */
+
+	unsigned int quirks;	/* Deviations from spec. */
+
+/* Controller doesn't honor resets unless we touch the clock register */
+#define SDHCI_QUIRK_CLOCK_BEFORE_RESET			(1<<0)
+/* Controller has bad caps bits, but really supports DMA */
+#define SDHCI_QUIRK_FORCE_DMA				(1<<1)
+/* Controller doesn't like to be reset when there is no card inserted. */
+#define SDHCI_QUIRK_NO_CARD_NO_RESET			(1<<2)
+/* Controller doesn't like clearing the power reg before a change */
+#define SDHCI_QUIRK_SINGLE_POWER_WRITE			(1<<3)
+/* Controller has flaky internal state so reset it on each ios change */
+#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS		(1<<4)
+/* Controller has an unusable DMA engine */
+#define SDHCI_QUIRK_BROKEN_DMA				(1<<5)
+/* Controller has an unusable ADMA engine */
+#define SDHCI_QUIRK_BROKEN_ADMA				(1<<6)
+/* Controller can only DMA from 32-bit aligned addresses */
+#define SDHCI_QUIRK_32BIT_DMA_ADDR			(1<<7)
+/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
+#define SDHCI_QUIRK_32BIT_DMA_SIZE			(1<<8)
+/* Controller can only ADMA chunks that are a multiple of 32 bits */
+#define SDHCI_QUIRK_32BIT_ADMA_SIZE			(1<<9)
+/* Controller needs to be reset after each request to stay stable */
+#define SDHCI_QUIRK_RESET_AFTER_REQUEST			(1<<10)
+/* Controller needs voltage and power writes to happen separately */
+#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER		(1<<11)
+/* Controller provides an incorrect timeout value for transfers */
+#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL			(1<<12)
+/* Controller has an issue with buffer bits for small transfers */
+#define SDHCI_QUIRK_BROKEN_SMALL_PIO			(1<<13)
+/* Controller does not provide transfer-complete interrupt when not busy */
+#define SDHCI_QUIRK_NO_BUSY_IRQ				(1<<14)
+/* Controller has unreliable card detection */
+#define SDHCI_QUIRK_BROKEN_CARD_DETECTION		(1<<15)
+/* Controller reports inverted write-protect state */
+#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT		(1<<16)
+/* Controller has nonstandard clock management */
+#define SDHCI_QUIRK_NONSTANDARD_CLOCK			(1<<17)
+/* Controller does not like fast PIO transfers */
+#define SDHCI_QUIRK_PIO_NEEDS_DELAY			(1<<18)
+/* Controller losing signal/interrupt enable states after reset */
+#define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET		(1<<19)
+/* Controller has to be forced to use block size of 2048 bytes */
+#define SDHCI_QUIRK_FORCE_BLK_SZ_2048			(1<<20)
+/* Controller cannot do multi-block transfers */
+#define SDHCI_QUIRK_NO_MULTIBLOCK			(1<<21)
+/* Controller can only handle 1-bit data transfers */
+#define SDHCI_QUIRK_FORCE_1_BIT_DATA			(1<<22)
+/* Controller needs 10ms delay between applying power and clock */
+#define SDHCI_QUIRK_DELAY_AFTER_POWER			(1<<23)
+/* Controller uses SDCLK instead of TMCLK for data timeouts */
+#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK		(1<<24)
+/* Controller reports wrong base clock capability */
+#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN		(1<<25)
+/* Controller cannot support End Attribute in NOP ADMA descriptor */
+#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC		(1<<26)
+/* Controller is missing device caps. Use caps provided by host */
+#define SDHCI_QUIRK_MISSING_CAPS			(1<<27)
+/* Controller uses Auto CMD12 command to stop the transfer */
+#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12		(1<<28)
+/* Controller doesn't have HISPD bit field in HI-SPEED SD card */
+#define SDHCI_QUIRK_NO_HISPD_BIT			(1<<29)
+/* Controller treats ADMA descriptors with length 0000h incorrectly */
+#define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC		(1<<30)
+/* The read-only detection via SDHCI_PRESENT_STATE register is unstable */
+#define SDHCI_QUIRK_UNSTABLE_RO_DETECT			(1<<31)
+
+	unsigned int quirks2;	/* More deviations from spec. */
+
+#define SDHCI_QUIRK2_HOST_OFF_CARD_ON			(1<<0)
+
+	int irq;		/* Device IRQ */
+	void __iomem *ioaddr;	/* Mapped address */
+
+	const struct sdhci_ops *ops;	/* Low level hw interface */
+
+	struct regulator *vmmc;	/* Power regulator */
+
+	/* Internal data */
+	struct mmc_host *mmc;	/* MMC structure */
+	u64 dma_mask;		/* custom DMA mask */
+
+#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
+	struct led_classdev led;	/* LED control */
+	char led_name[32];
+#endif
+
+	spinlock_t lock;	/* Mutex */
+
+	int flags;		/* Host attributes */
+#define SDHCI_USE_SDMA		(1<<0)	/* Host is SDMA capable */
+#define SDHCI_USE_ADMA		(1<<1)	/* Host is ADMA capable */
+#define SDHCI_REQ_USE_DMA	(1<<2)	/* Use DMA for this req. */
+#define SDHCI_DEVICE_DEAD	(1<<3)	/* Device unresponsive */
+#define SDHCI_SDR50_NEEDS_TUNING (1<<4)	/* SDR50 needs tuning */
+#define SDHCI_NEEDS_RETUNING	(1<<5)	/* Host needs retuning */
+#define SDHCI_AUTO_CMD12	(1<<6)	/* Auto CMD12 support */
+#define SDHCI_AUTO_CMD23	(1<<7)	/* Auto CMD23 support */
+#define SDHCI_PV_ENABLED	(1<<8)	/* Preset value enabled */
+#define SDHCI_SDIO_IRQ_ENABLED	(1<<9)	/* SDIO irq enabled */
+#define SDHCI_HS200_NEEDS_TUNING (1<<10)	/* HS200 needs tuning */
+
+	unsigned int version;	/* SDHCI spec. version */
+
+	unsigned int max_clk;	/* Max possible freq (MHz) */
+	unsigned int timeout_clk;	/* Timeout freq (KHz) */
+	unsigned int clk_mul;	/* Clock Muliplier value */
+
+	unsigned int clock;	/* Current clock (MHz) */
+	u8 pwr;			/* Current voltage */
+
+	bool runtime_suspended;	/* Host is runtime suspended */
+
+	struct mmc_request *mrq;	/* Current request */
+	struct mmc_command *cmd;	/* Current command */
+	struct mmc_data *data;	/* Current data request */
+	unsigned int data_early:1;	/* Data finished before cmd */
+
+	struct sg_mapping_iter sg_miter;	/* SG state for PIO */
+	unsigned int blocks;	/* remaining PIO blocks */
+
+	int sg_count;		/* Mapped sg entries */
+
+	u8 *adma_desc;		/* ADMA descriptor table */
+	u8 *align_buffer;	/* Bounce buffer */
+
+	dma_addr_t adma_addr;	/* Mapped ADMA descr. table */
+	dma_addr_t align_addr;	/* Mapped bounce buffer */
+
+	struct tasklet_struct card_tasklet;	/* Tasklet structures */
+	struct tasklet_struct finish_tasklet;
+
+	struct timer_list timer;	/* Timer for timeouts */
+
+	unsigned int caps;	/* Alternative capabilities */
+
+	unsigned int            ocr_avail_sdio;	/* OCR bit masks */
+	unsigned int            ocr_avail_sd;
+	unsigned int            ocr_avail_mmc;
+
+	wait_queue_head_t	buf_ready_int;	/* Waitqueue for Buffer Read Ready interrupt */
+	unsigned int		tuning_done;	/* Condition flag set when CMD19 succeeds */
+
+	unsigned int		tuning_count;	/* Timer count for re-tuning */
+	unsigned int		tuning_mode;	/* Re-tuning mode supported by host */
+#define SDHCI_TUNING_MODE_1	0
+	struct timer_list	tuning_timer;	/* Timer for tuning */
+
+	unsigned long private[0] ____cacheline_aligned;
+};
+#endif /* LINUX_MMC_SDHCI_H */
diff --git a/include/linux/mmc/sdio.h b/include/linux/mmc/sdio.h
new file mode 100644
index 00000000..c9fe66c5
--- /dev/null
+++ b/include/linux/mmc/sdio.h
@@ -0,0 +1,191 @@
+/*
+ *  include/linux/mmc/sdio.h
+ *
+ *  Copyright 2006-2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#ifndef LINUX_MMC_SDIO_H
+#define LINUX_MMC_SDIO_H
+
+/* SDIO commands                         type  argument     response */
+#define SD_IO_SEND_OP_COND          5 /* bcr  [23:0] OCR         R4  */
+#define SD_IO_RW_DIRECT            52 /* ac   [31:0] See below   R5  */
+#define SD_IO_RW_EXTENDED          53 /* adtc [31:0] See below   R5  */
+
+/*
+ * SD_IO_RW_DIRECT argument format:
+ *
+ *      [31] R/W flag
+ *      [30:28] Function number
+ *      [27] RAW flag
+ *      [25:9] Register address
+ *      [7:0] Data
+ */
+
+/*
+ * SD_IO_RW_EXTENDED argument format:
+ *
+ *      [31] R/W flag
+ *      [30:28] Function number
+ *      [27] Block mode
+ *      [26] Increment address
+ *      [25:9] Register address
+ *      [8:0] Byte/block count
+ */
+
+#define R4_18V_PRESENT (1<<24)
+#define R4_MEMORY_PRESENT (1 << 27)
+
+/*
+  SDIO status in R5
+  Type
+	e : error bit
+	s : status bit
+	r : detected and set for the actual command response
+	x : detected and set during command execution. the host must poll
+            the card by sending status command in order to read these bits.
+  Clear condition
+	a : according to the card state
+	b : always related to the previous command. Reception of
+            a valid command will clear it (with a delay of one command)
+	c : clear by read
+ */
+
+#define R5_COM_CRC_ERROR	(1 << 15)	/* er, b */
+#define R5_ILLEGAL_COMMAND	(1 << 14)	/* er, b */
+#define R5_ERROR		(1 << 11)	/* erx, c */
+#define R5_FUNCTION_NUMBER	(1 << 9)	/* er, c */
+#define R5_OUT_OF_RANGE		(1 << 8)	/* er, c */
+#define R5_STATUS(x)		(x & 0xCB00)
+#define R5_IO_CURRENT_STATE(x)	((x & 0x3000) >> 12) /* s, b */
+
+/*
+ * Card Common Control Registers (CCCR)
+ */
+
+#define SDIO_CCCR_CCCR		0x00
+
+#define  SDIO_CCCR_REV_1_00	0	/* CCCR/FBR Version 1.00 */
+#define  SDIO_CCCR_REV_1_10	1	/* CCCR/FBR Version 1.10 */
+#define  SDIO_CCCR_REV_1_20	2	/* CCCR/FBR Version 1.20 */
+#define  SDIO_CCCR_REV_3_00	3	/* CCCR/FBR Version 3.00 */
+
+#define  SDIO_SDIO_REV_1_00	0	/* SDIO Spec Version 1.00 */
+#define  SDIO_SDIO_REV_1_10	1	/* SDIO Spec Version 1.10 */
+#define  SDIO_SDIO_REV_1_20	2	/* SDIO Spec Version 1.20 */
+#define  SDIO_SDIO_REV_2_00	3	/* SDIO Spec Version 2.00 */
+#define  SDIO_SDIO_REV_3_00	4	/* SDIO Spec Version 3.00 */
+
+#define SDIO_CCCR_SD		0x01
+
+#define  SDIO_SD_REV_1_01	0	/* SD Physical Spec Version 1.01 */
+#define  SDIO_SD_REV_1_10	1	/* SD Physical Spec Version 1.10 */
+#define  SDIO_SD_REV_2_00	2	/* SD Physical Spec Version 2.00 */
+#define  SDIO_SD_REV_3_00	3	/* SD Physical Spev Version 3.00 */
+
+#define SDIO_CCCR_IOEx		0x02
+#define SDIO_CCCR_IORx		0x03
+
+#define SDIO_CCCR_IENx		0x04	/* Function/Master Interrupt Enable */
+#define SDIO_CCCR_INTx		0x05	/* Function Interrupt Pending */
+
+#define SDIO_CCCR_ABORT		0x06	/* function abort/card reset */
+
+#define SDIO_CCCR_IF		0x07	/* bus interface controls */
+
+#define  SDIO_BUS_WIDTH_1BIT	0x00
+#define  SDIO_BUS_WIDTH_4BIT	0x02
+#define  SDIO_BUS_ECSI		0x20	/* Enable continuous SPI interrupt */
+#define  SDIO_BUS_SCSI		0x40	/* Support continuous SPI interrupt */
+
+#define  SDIO_BUS_ASYNC_INT	0x20
+
+#define  SDIO_BUS_CD_DISABLE     0x80	/* disable pull-up on DAT3 (pin 1) */
+
+#define SDIO_CCCR_CAPS		0x08
+
+#define  SDIO_CCCR_CAP_SDC	0x01	/* can do CMD52 while data transfer */
+#define  SDIO_CCCR_CAP_SMB	0x02	/* can do multi-block xfers (CMD53) */
+#define  SDIO_CCCR_CAP_SRW	0x04	/* supports read-wait protocol */
+#define  SDIO_CCCR_CAP_SBS	0x08	/* supports suspend/resume */
+#define  SDIO_CCCR_CAP_S4MI	0x10	/* interrupt during 4-bit CMD53 */
+#define  SDIO_CCCR_CAP_E4MI	0x20	/* enable ints during 4-bit CMD53 */
+#define  SDIO_CCCR_CAP_LSC	0x40	/* low speed card */
+#define  SDIO_CCCR_CAP_4BLS	0x80	/* 4 bit low speed card */
+
+#define SDIO_CCCR_CIS		0x09	/* common CIS pointer (3 bytes) */
+
+/* Following 4 regs are valid only if SBS is set */
+#define SDIO_CCCR_SUSPEND	0x0c
+#define SDIO_CCCR_SELx		0x0d
+#define SDIO_CCCR_EXECx		0x0e
+#define SDIO_CCCR_READYx	0x0f
+
+#define SDIO_CCCR_BLKSIZE	0x10
+
+#define SDIO_CCCR_POWER		0x12
+
+#define  SDIO_POWER_SMPC	0x01	/* Supports Master Power Control */
+#define  SDIO_POWER_EMPC	0x02	/* Enable Master Power Control */
+
+#define SDIO_CCCR_SPEED		0x13
+
+#define  SDIO_SPEED_SHS		0x01	/* Supports High-Speed mode */
+#define  SDIO_SPEED_BSS_SHIFT	1
+#define  SDIO_SPEED_BSS_MASK	(7<<SDIO_SPEED_BSS_SHIFT)
+#define  SDIO_SPEED_SDR12	(0<<SDIO_SPEED_BSS_SHIFT)
+#define  SDIO_SPEED_SDR25	(1<<SDIO_SPEED_BSS_SHIFT)
+#define  SDIO_SPEED_SDR50	(2<<SDIO_SPEED_BSS_SHIFT)
+#define  SDIO_SPEED_SDR104	(3<<SDIO_SPEED_BSS_SHIFT)
+#define  SDIO_SPEED_DDR50	(4<<SDIO_SPEED_BSS_SHIFT)
+#define  SDIO_SPEED_EHS		SDIO_SPEED_SDR25	/* Enable High-Speed */
+
+#define SDIO_CCCR_UHS		0x14
+#define  SDIO_UHS_SDR50		0x01
+#define  SDIO_UHS_SDR104	0x02
+#define  SDIO_UHS_DDR50		0x04
+
+#define SDIO_CCCR_DRIVE_STRENGTH 0x15
+#define  SDIO_SDTx_MASK		0x07
+#define  SDIO_DRIVE_SDTA	(1<<0)
+#define  SDIO_DRIVE_SDTC	(1<<1)
+#define  SDIO_DRIVE_SDTD	(1<<2)
+#define  SDIO_DRIVE_DTSx_MASK	0x03
+#define  SDIO_DRIVE_DTSx_SHIFT	4
+#define  SDIO_DTSx_SET_TYPE_B	(0 << SDIO_DRIVE_DTSx_SHIFT)
+#define  SDIO_DTSx_SET_TYPE_A	(1 << SDIO_DRIVE_DTSx_SHIFT)
+#define  SDIO_DTSx_SET_TYPE_C	(2 << SDIO_DRIVE_DTSx_SHIFT)
+#define  SDIO_DTSx_SET_TYPE_D	(3 << SDIO_DRIVE_DTSx_SHIFT)
+/*
+ * Function Basic Registers (FBR)
+ */
+
+#define SDIO_FBR_BASE(f)	((f) * 0x100) /* base of function f's FBRs */
+
+#define SDIO_FBR_STD_IF		0x00
+
+#define  SDIO_FBR_SUPPORTS_CSA	0x40	/* supports Code Storage Area */
+#define  SDIO_FBR_ENABLE_CSA	0x80	/* enable Code Storage Area */
+
+#define SDIO_FBR_STD_IF_EXT	0x01
+
+#define SDIO_FBR_POWER		0x02
+
+#define  SDIO_FBR_POWER_SPS	0x01	/* Supports Power Selection */
+#define  SDIO_FBR_POWER_EPS	0x02	/* Enable (low) Power Selection */
+
+#define SDIO_FBR_CIS		0x09	/* CIS pointer (3 bytes) */
+
+
+#define SDIO_FBR_CSA		0x0C	/* CSA pointer (3 bytes) */
+
+#define SDIO_FBR_CSA_DATA	0x0F
+
+#define SDIO_FBR_BLKSIZE	0x10	/* block size (2 bytes) */
+
+#endif /* LINUX_MMC_SDIO_H */
diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h
new file mode 100755
index 00000000..dc680c4b
--- /dev/null
+++ b/include/linux/mmc/sdio_func.h
@@ -0,0 +1,174 @@
+/*
+ *  include/linux/mmc/sdio_func.h
+ *
+ *  Copyright 2007-2008 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#ifndef LINUX_MMC_SDIO_FUNC_H
+#define LINUX_MMC_SDIO_FUNC_H
+
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+
+#include <linux/mmc/pm.h>
+
+struct mmc_card;
+struct sdio_func;
+
+typedef void (sdio_irq_handler_t)(struct sdio_func *);
+
+/*
+ * Structure used to hold embedded SDIO device data from platform layer
+ */
+struct sdio_embedded_func {
+	uint8_t f_class;
+	uint32_t f_maxblksize;
+};
+
+/*
+ * SDIO function CIS tuple (unknown to the core)
+ */
+struct sdio_func_tuple {
+	struct sdio_func_tuple *next;
+	unsigned char code;
+	unsigned char size;
+	unsigned char data[0];
+};
+
+/*
+ * SDIO function devices
+ */
+struct sdio_func {
+	struct mmc_card		*card;		/* the card this device belongs to */
+	struct device		dev;		/* the device */
+	sdio_irq_handler_t	*irq_handler;	/* IRQ callback */
+	unsigned int		num;		/* function number */
+
+	unsigned char		class;		/* standard interface class */
+	unsigned short		vendor;		/* vendor id */
+	unsigned short		device;		/* device id */
+
+	unsigned		max_blksize;	/* maximum block size */
+	unsigned		cur_blksize;	/* current block size */
+
+	unsigned		enable_timeout;	/* max enable timeout in msec */
+
+	unsigned int		state;		/* function state */
+#define SDIO_STATE_PRESENT	(1<<0)		/* present in sysfs */
+
+	u8			tmpbuf[4];	/* DMA:able scratch buffer */
+
+	unsigned		num_info;	/* number of info strings */
+	const char		**info;		/* info strings */
+
+	struct sdio_func_tuple *tuples;
+};
+
+#define sdio_func_present(f)	((f)->state & SDIO_STATE_PRESENT)
+
+#define sdio_func_set_present(f) ((f)->state |= SDIO_STATE_PRESENT)
+
+#define sdio_func_id(f)		(dev_name(&(f)->dev))
+
+#define sdio_get_drvdata(f)	dev_get_drvdata(&(f)->dev)
+#define sdio_set_drvdata(f,d)	dev_set_drvdata(&(f)->dev, d)
+#define dev_to_sdio_func(d)	container_of(d, struct sdio_func, dev)
+
+/*
+ * SDIO function device driver
+ */
+struct sdio_driver {
+	char *name;
+	const struct sdio_device_id *id_table;
+
+	int (*probe)(struct sdio_func *, const struct sdio_device_id *);
+	void (*remove)(struct sdio_func *);
+
+	struct device_driver drv;
+};
+
+#define to_sdio_driver(d)	container_of(d, struct sdio_driver, drv)
+
+/**
+ * SDIO_DEVICE - macro used to describe a specific SDIO device
+ * @vend: the 16 bit manufacturer code
+ * @dev: the 16 bit function id
+ *
+ * This macro is used to create a struct sdio_device_id that matches a
+ * specific device. The class field will be set to SDIO_ANY_ID.
+ */
+#define SDIO_DEVICE(vend,dev) \
+	.class = SDIO_ANY_ID, \
+	.vendor = (vend), .device = (dev)
+
+/**
+ * SDIO_DEVICE_CLASS - macro used to describe a specific SDIO device class
+ * @dev_class: the 8 bit standard interface code
+ *
+ * This macro is used to create a struct sdio_device_id that matches a
+ * specific standard SDIO function type.  The vendor and device fields will
+ * be set to SDIO_ANY_ID.
+ */
+#define SDIO_DEVICE_CLASS(dev_class) \
+	.class = (dev_class), \
+	.vendor = SDIO_ANY_ID, .device = SDIO_ANY_ID
+
+extern int sdio_register_driver(struct sdio_driver *);
+extern void sdio_unregister_driver(struct sdio_driver *);
+
+/*
+ * SDIO I/O operations
+ */
+extern void sdio_claim_host(struct sdio_func *func);
+extern void sdio_release_host(struct sdio_func *func);
+
+extern int sdio_enable_func(struct sdio_func *func);
+extern int sdio_disable_func(struct sdio_func *func);
+
+extern int sdio_set_block_size(struct sdio_func *func, unsigned blksz);
+
+extern int sdio_claim_irq(struct sdio_func *func, sdio_irq_handler_t *handler);
+extern int sdio_release_irq(struct sdio_func *func);
+
+extern unsigned int sdio_align_size(struct sdio_func *func, unsigned int sz);
+
+extern u8 sdio_readb(struct sdio_func *func, unsigned int addr, int *err_ret);
+extern u8 sdio_readb_ext(struct sdio_func *func, unsigned int addr, int *err_ret,
+	unsigned in);
+extern u16 sdio_readw(struct sdio_func *func, unsigned int addr, int *err_ret);
+extern u32 sdio_readl(struct sdio_func *func, unsigned int addr, int *err_ret);
+
+extern int sdio_memcpy_fromio(struct sdio_func *func, void *dst,
+	unsigned int addr, int count);
+extern int sdio_readsb(struct sdio_func *func, void *dst,
+	unsigned int addr, int count);
+
+extern void sdio_writeb(struct sdio_func *func, u8 b,
+	unsigned int addr, int *err_ret);
+extern void sdio_writew(struct sdio_func *func, u16 b,
+	unsigned int addr, int *err_ret);
+extern void sdio_writel(struct sdio_func *func, u32 b,
+	unsigned int addr, int *err_ret);
+
+extern u8 sdio_writeb_readb(struct sdio_func *func, u8 write_byte,
+	unsigned int addr, int *err_ret);
+
+extern int sdio_memcpy_toio(struct sdio_func *func, unsigned int addr,
+	void *src, int count);
+extern int sdio_writesb(struct sdio_func *func, unsigned int addr,
+	void *src, int count);
+
+extern unsigned char sdio_f0_readb(struct sdio_func *func,
+	unsigned int addr, int *err_ret);
+extern void sdio_f0_writeb(struct sdio_func *func, unsigned char b,
+	unsigned int addr, int *err_ret);
+
+extern mmc_pm_flag_t sdio_get_host_pm_caps(struct sdio_func *func);
+extern int sdio_set_host_pm_flags(struct sdio_func *func, mmc_pm_flag_t flags);
+
+#endif /* LINUX_MMC_SDIO_FUNC_H */
diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
new file mode 100644
index 00000000..9f03feed
--- /dev/null
+++ b/include/linux/mmc/sdio_ids.h
@@ -0,0 +1,47 @@
+/*
+ * SDIO Classes, Interface Types, Manufacturer IDs, etc.
+ */
+
+#ifndef LINUX_MMC_SDIO_IDS_H
+#define LINUX_MMC_SDIO_IDS_H
+
+/*
+ * Standard SDIO Function Interfaces
+ */
+
+#define SDIO_CLASS_NONE		0x00	/* Not a SDIO standard interface */
+#define SDIO_CLASS_UART		0x01	/* standard UART interface */
+#define SDIO_CLASS_BT_A		0x02	/* Type-A BlueTooth std interface */
+#define SDIO_CLASS_BT_B		0x03	/* Type-B BlueTooth std interface */
+#define SDIO_CLASS_GPS		0x04	/* GPS standard interface */
+#define SDIO_CLASS_CAMERA	0x05	/* Camera standard interface */
+#define SDIO_CLASS_PHS		0x06	/* PHS standard interface */
+#define SDIO_CLASS_WLAN		0x07	/* WLAN interface */
+#define SDIO_CLASS_ATA		0x08	/* Embedded SDIO-ATA std interface */
+#define SDIO_CLASS_BT_AMP	0x09	/* Type-A Bluetooth AMP interface */
+
+/*
+ * Vendors and devices.  Sort key: vendor first, device next.
+ */
+#define SDIO_VENDOR_ID_INTEL			0x0089
+#define SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX	0x1402
+#define SDIO_DEVICE_ID_INTEL_IWMC3200WIFI	0x1403
+#define SDIO_DEVICE_ID_INTEL_IWMC3200TOP	0x1404
+#define SDIO_DEVICE_ID_INTEL_IWMC3200GPS	0x1405
+#define SDIO_DEVICE_ID_INTEL_IWMC3200BT		0x1406
+#define SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX_2G5	0x1407
+
+#define SDIO_VENDOR_ID_MARVELL			0x02df
+#define SDIO_DEVICE_ID_MARVELL_LIBERTAS		0x9103
+#define SDIO_DEVICE_ID_MARVELL_8688WLAN		0x9104
+#define SDIO_DEVICE_ID_MARVELL_8688BT		0x9105
+
+#define SDIO_VENDOR_ID_SIANO			0x039a
+#define SDIO_DEVICE_ID_SIANO_NOVA_B0		0x0201
+#define SDIO_DEVICE_ID_SIANO_NICE		0x0202
+#define SDIO_DEVICE_ID_SIANO_VEGA_A0		0x0300
+#define SDIO_DEVICE_ID_SIANO_VENICE		0x0301
+#define SDIO_DEVICE_ID_SIANO_NOVA_A0		0x1100
+#define SDIO_DEVICE_ID_SIANO_STELLAR 		0x5347
+
+#endif /* LINUX_MMC_SDIO_IDS_H */
diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h
new file mode 100644
index 00000000..05f0e3db
--- /dev/null
+++ b/include/linux/mmc/sh_mmcif.h
@@ -0,0 +1,222 @@
+/*
+ * include/linux/mmc/sh_mmcif.h
+ *
+ * platform data for eMMC driver
+ *
+ * Copyright (C) 2010 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ */
+
+#ifndef LINUX_MMC_SH_MMCIF_H
+#define LINUX_MMC_SH_MMCIF_H
+
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/sh_dma.h>
+
+/*
+ * MMCIF : CE_CLK_CTRL [19:16]
+ * 1000 : Peripheral clock / 512
+ * 0111 : Peripheral clock / 256
+ * 0110 : Peripheral clock / 128
+ * 0101 : Peripheral clock / 64
+ * 0100 : Peripheral clock / 32
+ * 0011 : Peripheral clock / 16
+ * 0010 : Peripheral clock / 8
+ * 0001 : Peripheral clock / 4
+ * 0000 : Peripheral clock / 2
+ * 1111 : Peripheral clock (sup_pclk set '1')
+ */
+
+struct sh_mmcif_dma {
+	struct sh_dmae_slave chan_priv_tx;
+	struct sh_dmae_slave chan_priv_rx;
+};
+
+struct sh_mmcif_plat_data {
+	void (*set_pwr)(struct platform_device *pdev, int state);
+	void (*down_pwr)(struct platform_device *pdev);
+	int (*get_cd)(struct platform_device *pdef);
+	struct sh_mmcif_dma	*dma;		/* Deprecated. Instead */
+	unsigned int		slave_id_tx;	/* use embedded slave_id_[tr]x */
+	unsigned int		slave_id_rx;
+	u8			sup_pclk;	/* 1 :SH7757, 0: SH7724/SH7372 */
+	unsigned long		caps;
+	u32			ocr;
+};
+
+#define MMCIF_CE_CMD_SET	0x00000000
+#define MMCIF_CE_ARG		0x00000008
+#define MMCIF_CE_ARG_CMD12	0x0000000C
+#define MMCIF_CE_CMD_CTRL	0x00000010
+#define MMCIF_CE_BLOCK_SET	0x00000014
+#define MMCIF_CE_CLK_CTRL	0x00000018
+#define MMCIF_CE_BUF_ACC	0x0000001C
+#define MMCIF_CE_RESP3		0x00000020
+#define MMCIF_CE_RESP2		0x00000024
+#define MMCIF_CE_RESP1		0x00000028
+#define MMCIF_CE_RESP0		0x0000002C
+#define MMCIF_CE_RESP_CMD12	0x00000030
+#define MMCIF_CE_DATA		0x00000034
+#define MMCIF_CE_INT		0x00000040
+#define MMCIF_CE_INT_MASK	0x00000044
+#define MMCIF_CE_HOST_STS1	0x00000048
+#define MMCIF_CE_HOST_STS2	0x0000004C
+#define MMCIF_CE_VERSION	0x0000007C
+
+/* CE_BUF_ACC */
+#define BUF_ACC_DMAWEN		(1 << 25)
+#define BUF_ACC_DMAREN		(1 << 24)
+#define BUF_ACC_BUSW_32		(0 << 17)
+#define BUF_ACC_BUSW_16		(1 << 17)
+#define BUF_ACC_ATYP		(1 << 16)
+
+/* CE_CLK_CTRL */
+#define CLK_ENABLE		(1 << 24) /* 1: output mmc clock */
+#define CLK_CLEAR		(0xf << 16)
+#define CLK_SUP_PCLK		(0xf << 16)
+#define CLKDIV_4		(1 << 16) /* mmc clock frequency.
+					   * n: bus clock/(2^(n+1)) */
+#define CLKDIV_256		(7 << 16) /* mmc clock frequency. (see above) */
+#define SRSPTO_256		(2 << 12) /* resp timeout */
+#define SRBSYTO_29		(0xf << 8) /* resp busy timeout */
+#define SRWDTO_29		(0xf << 4) /* read/write timeout */
+#define SCCSTO_29		(0xf << 0) /* ccs timeout */
+
+/* CE_VERSION */
+#define SOFT_RST_ON		(1 << 31)
+#define SOFT_RST_OFF		0
+
+static inline u32 sh_mmcif_readl(void __iomem *addr, int reg)
+{
+	return __raw_readl(addr + reg);
+}
+
+static inline void sh_mmcif_writel(void __iomem *addr, int reg, u32 val)
+{
+	__raw_writel(val, addr + reg);
+}
+
+#define SH_MMCIF_BBS 512 /* boot block size */
+
+static inline void sh_mmcif_boot_cmd_send(void __iomem *base,
+					  unsigned long cmd, unsigned long arg)
+{
+	sh_mmcif_writel(base, MMCIF_CE_INT, 0);
+	sh_mmcif_writel(base, MMCIF_CE_ARG, arg);
+	sh_mmcif_writel(base, MMCIF_CE_CMD_SET, cmd);
+}
+
+static inline int sh_mmcif_boot_cmd_poll(void __iomem *base, unsigned long mask)
+{
+	unsigned long tmp;
+	int cnt;
+
+	for (cnt = 0; cnt < 1000000; cnt++) {
+		tmp = sh_mmcif_readl(base, MMCIF_CE_INT);
+		if (tmp & mask) {
+			sh_mmcif_writel(base, MMCIF_CE_INT, tmp & ~mask);
+			return 0;
+		}
+	}
+
+	return -1;
+}
+
+static inline int sh_mmcif_boot_cmd(void __iomem *base,
+				    unsigned long cmd, unsigned long arg)
+{
+	sh_mmcif_boot_cmd_send(base, cmd, arg);
+	return sh_mmcif_boot_cmd_poll(base, 0x00010000);
+}
+
+static inline int sh_mmcif_boot_do_read_single(void __iomem *base,
+					       unsigned int block_nr,
+					       unsigned long *buf)
+{
+	int k;
+
+	/* CMD13 - Status */
+	sh_mmcif_boot_cmd(base, 0x0d400000, 0x00010000);
+
+	if (sh_mmcif_readl(base, MMCIF_CE_RESP0) != 0x0900)
+		return -1;
+
+	/* CMD17 - Read */
+	sh_mmcif_boot_cmd(base, 0x11480000, block_nr * SH_MMCIF_BBS);
+	if (sh_mmcif_boot_cmd_poll(base, 0x00100000) < 0)
+		return -1;
+
+	for (k = 0; k < (SH_MMCIF_BBS / 4); k++)
+		buf[k] = sh_mmcif_readl(base, MMCIF_CE_DATA);
+
+	return 0;
+}
+
+static inline int sh_mmcif_boot_do_read(void __iomem *base,
+					unsigned long first_block,
+					unsigned long nr_blocks,
+					void *buf)
+{
+	unsigned long k;
+	int ret = 0;
+
+	/* In data transfer mode: Set clock to Bus clock/4 (about 20Mhz) */
+	sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL,
+			CLK_ENABLE | CLKDIV_4 | SRSPTO_256 |
+			SRBSYTO_29 | SRWDTO_29 | SCCSTO_29);
+
+	/* CMD9 - Get CSD */
+	sh_mmcif_boot_cmd(base, 0x09806000, 0x00010000);
+
+	/* CMD7 - Select the card */
+	sh_mmcif_boot_cmd(base, 0x07400000, 0x00010000);
+
+	/* CMD16 - Set the block size */
+	sh_mmcif_boot_cmd(base, 0x10400000, SH_MMCIF_BBS);
+
+	for (k = 0; !ret && k < nr_blocks; k++)
+		ret = sh_mmcif_boot_do_read_single(base, first_block + k,
+						   buf + (k * SH_MMCIF_BBS));
+
+	return ret;
+}
+
+static inline void sh_mmcif_boot_init(void __iomem *base)
+{
+	/* reset */
+	sh_mmcif_writel(base, MMCIF_CE_VERSION, SOFT_RST_ON);
+	sh_mmcif_writel(base, MMCIF_CE_VERSION, SOFT_RST_OFF);
+
+	/* byte swap */
+	sh_mmcif_writel(base, MMCIF_CE_BUF_ACC, BUF_ACC_ATYP);
+
+	/* Set block size in MMCIF hardware */
+	sh_mmcif_writel(base, MMCIF_CE_BLOCK_SET, SH_MMCIF_BBS);
+
+	/* Enable the clock, set it to Bus clock/256 (about 325Khz). */
+	sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL,
+			CLK_ENABLE | CLKDIV_256 | SRSPTO_256 |
+			SRBSYTO_29 | SRWDTO_29 | SCCSTO_29);
+
+	/* CMD0 */
+	sh_mmcif_boot_cmd(base, 0x00000040, 0);
+
+	/* CMD1 - Get OCR */
+	do {
+		sh_mmcif_boot_cmd(base, 0x01405040, 0x40300000); /* CMD1 */
+	} while ((sh_mmcif_readl(base, MMCIF_CE_RESP0) & 0x80000000)
+		 != 0x80000000);
+
+	/* CMD2 - Get CID */
+	sh_mmcif_boot_cmd(base, 0x02806040, 0);
+
+	/* CMD3 - Set card relative address */
+	sh_mmcif_boot_cmd(base, 0x03400040, 0x00010000);
+}
+
+#endif /* LINUX_MMC_SH_MMCIF_H */
diff --git a/include/linux/mmc/sh_mobile_sdhi.h b/include/linux/mmc/sh_mobile_sdhi.h
new file mode 100644
index 00000000..e94e620a
--- /dev/null
+++ b/include/linux/mmc/sh_mobile_sdhi.h
@@ -0,0 +1,38 @@
+#ifndef LINUX_MMC_SH_MOBILE_SDHI_H
+#define LINUX_MMC_SH_MOBILE_SDHI_H
+
+#include <linux/types.h>
+
+struct platform_device;
+struct tmio_mmc_data;
+
+#define SH_MOBILE_SDHI_IRQ_CARD_DETECT	"card_detect"
+#define SH_MOBILE_SDHI_IRQ_SDCARD	"sdcard"
+#define SH_MOBILE_SDHI_IRQ_SDIO		"sdio"
+
+/**
+ * struct sh_mobile_sdhi_ops - SDHI driver callbacks
+ * @cd_wakeup:		trigger a card-detection run
+ */
+struct sh_mobile_sdhi_ops {
+	void (*cd_wakeup)(const struct platform_device *pdev);
+};
+
+struct sh_mobile_sdhi_info {
+	int dma_slave_tx;
+	int dma_slave_rx;
+	unsigned long tmio_flags;
+	unsigned long tmio_caps;
+	u32 tmio_ocr_mask;	/* available MMC voltages */
+	unsigned int cd_gpio;
+	struct tmio_mmc_data *pdata;
+	void (*set_pwr)(struct platform_device *pdev, int state);
+	int (*get_cd)(struct platform_device *pdev);
+
+	/* callbacks for board specific setup code */
+	int (*init)(struct platform_device *pdev,
+		    const struct sh_mobile_sdhi_ops *ops);
+	void (*cleanup)(struct platform_device *pdev);
+};
+
+#endif /* LINUX_MMC_SH_MOBILE_SDHI_H */
diff --git a/include/linux/mmc/tmio.h b/include/linux/mmc/tmio.h
new file mode 100644
index 00000000..a1c1f321
--- /dev/null
+++ b/include/linux/mmc/tmio.h
@@ -0,0 +1,65 @@
+/*
+ * include/linux/mmc/tmio.h
+ *
+ * Copyright (C) 2007 Ian Molton
+ * Copyright (C) 2004 Ian Molton
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Driver for the MMC / SD / SDIO cell found in:
+ *
+ * TC6393XB TC6391XB TC6387XB T7L66XB ASIC3
+ */
+#ifndef LINUX_MMC_TMIO_H
+#define LINUX_MMC_TMIO_H
+
+#define CTL_SD_CMD 0x00
+#define CTL_ARG_REG 0x04
+#define CTL_STOP_INTERNAL_ACTION 0x08
+#define CTL_XFER_BLK_COUNT 0xa
+#define CTL_RESPONSE 0x0c
+#define CTL_STATUS 0x1c
+#define CTL_STATUS2 0x1e
+#define CTL_IRQ_MASK 0x20
+#define CTL_SD_CARD_CLK_CTL 0x24
+#define CTL_SD_XFER_LEN 0x26
+#define CTL_SD_MEM_CARD_OPT 0x28
+#define CTL_SD_ERROR_DETAIL_STATUS 0x2c
+#define CTL_SD_DATA_PORT 0x30
+#define CTL_TRANSACTION_CTL 0x34
+#define CTL_SDIO_STATUS 0x36
+#define CTL_SDIO_IRQ_MASK 0x38
+#define CTL_DMA_ENABLE 0xd8
+#define CTL_RESET_SD 0xe0
+#define CTL_SDIO_REGS 0x100
+#define CTL_CLK_AND_WAIT_CTL 0x138
+#define CTL_RESET_SDIO 0x1e0
+
+/* Definitions for values the CTRL_STATUS register can take. */
+#define TMIO_STAT_CMDRESPEND    0x00000001
+#define TMIO_STAT_DATAEND       0x00000004
+#define TMIO_STAT_CARD_REMOVE   0x00000008
+#define TMIO_STAT_CARD_INSERT   0x00000010
+#define TMIO_STAT_SIGSTATE      0x00000020
+#define TMIO_STAT_WRPROTECT     0x00000080
+#define TMIO_STAT_CARD_REMOVE_A 0x00000100
+#define TMIO_STAT_CARD_INSERT_A 0x00000200
+#define TMIO_STAT_SIGSTATE_A    0x00000400
+#define TMIO_STAT_CMD_IDX_ERR   0x00010000
+#define TMIO_STAT_CRCFAIL       0x00020000
+#define TMIO_STAT_STOPBIT_ERR   0x00040000
+#define TMIO_STAT_DATATIMEOUT   0x00080000
+#define TMIO_STAT_RXOVERFLOW    0x00100000
+#define TMIO_STAT_TXUNDERRUN    0x00200000
+#define TMIO_STAT_CMDTIMEOUT    0x00400000
+#define TMIO_STAT_RXRDY         0x01000000
+#define TMIO_STAT_TXRQ          0x02000000
+#define TMIO_STAT_ILL_FUNC      0x20000000
+#define TMIO_STAT_CMD_BUSY      0x40000000
+#define TMIO_STAT_ILL_ACCESS    0x80000000
+
+#define TMIO_BBS		512		/* Boot block size */
+
+#endif /* LINUX_MMC_TMIO_H */
diff --git a/include/linux/mmdebug.h b/include/linux/mmdebug.h
new file mode 100644
index 00000000..c04ecfe0
--- /dev/null
+++ b/include/linux/mmdebug.h
@@ -0,0 +1,16 @@
+#ifndef LINUX_MM_DEBUG_H
+#define LINUX_MM_DEBUG_H 1
+
+#ifdef CONFIG_DEBUG_VM
+#define VM_BUG_ON(cond) BUG_ON(cond)
+#else
+#define VM_BUG_ON(cond) do { (void)(cond); } while (0)
+#endif
+
+#ifdef CONFIG_DEBUG_VIRTUAL
+#define VIRTUAL_BUG_ON(cond) BUG_ON(cond)
+#else
+#define VIRTUAL_BUG_ON(cond) do { } while (0)
+#endif
+
+#endif
diff --git a/include/linux/mmiotrace.h b/include/linux/mmiotrace.h
new file mode 100644
index 00000000..c5d52780
--- /dev/null
+++ b/include/linux/mmiotrace.h
@@ -0,0 +1,111 @@
+#ifndef _LINUX_MMIOTRACE_H
+#define _LINUX_MMIOTRACE_H
+
+#include <linux/types.h>
+#include <linux/list.h>
+
+struct kmmio_probe;
+struct pt_regs;
+
+typedef void (*kmmio_pre_handler_t)(struct kmmio_probe *,
+				struct pt_regs *, unsigned long addr);
+typedef void (*kmmio_post_handler_t)(struct kmmio_probe *,
+				unsigned long condition, struct pt_regs *);
+
+struct kmmio_probe {
+	/* kmmio internal list: */
+	struct list_head	list;
+	/* start location of the probe point: */
+	unsigned long		addr;
+	/* length of the probe region: */
+	unsigned long		len;
+	/* Called before addr is executed: */
+	kmmio_pre_handler_t	pre_handler;
+	/* Called after addr is executed: */
+	kmmio_post_handler_t	post_handler;
+	void			*private;
+};
+
+extern unsigned int kmmio_count;
+
+extern int register_kmmio_probe(struct kmmio_probe *p);
+extern void unregister_kmmio_probe(struct kmmio_probe *p);
+extern int kmmio_init(void);
+extern void kmmio_cleanup(void);
+
+#ifdef CONFIG_MMIOTRACE
+/* kmmio is active by some kmmio_probes? */
+static inline int is_kmmio_active(void)
+{
+	return kmmio_count;
+}
+
+/* Called from page fault handler. */
+extern int kmmio_handler(struct pt_regs *regs, unsigned long addr);
+
+/* Called from ioremap.c */
+extern void mmiotrace_ioremap(resource_size_t offset, unsigned long size,
+							void __iomem *addr);
+extern void mmiotrace_iounmap(volatile void __iomem *addr);
+
+/* For anyone to insert markers. Remember trailing newline. */
+extern __printf(1, 2) int mmiotrace_printk(const char *fmt, ...);
+#else /* !CONFIG_MMIOTRACE: */
+static inline int is_kmmio_active(void)
+{
+	return 0;
+}
+
+static inline int kmmio_handler(struct pt_regs *regs, unsigned long addr)
+{
+	return 0;
+}
+
+static inline void mmiotrace_ioremap(resource_size_t offset,
+					unsigned long size, void __iomem *addr)
+{
+}
+
+static inline void mmiotrace_iounmap(volatile void __iomem *addr)
+{
+}
+
+static inline __printf(1, 2) int mmiotrace_printk(const char *fmt, ...)
+{
+	return 0;
+}
+#endif /* CONFIG_MMIOTRACE */
+
+enum mm_io_opcode {
+	MMIO_READ	= 0x1,	/* struct mmiotrace_rw */
+	MMIO_WRITE	= 0x2,	/* struct mmiotrace_rw */
+	MMIO_PROBE	= 0x3,	/* struct mmiotrace_map */
+	MMIO_UNPROBE	= 0x4,	/* struct mmiotrace_map */
+	MMIO_UNKNOWN_OP = 0x5,	/* struct mmiotrace_rw */
+};
+
+struct mmiotrace_rw {
+	resource_size_t	phys;	/* PCI address of register */
+	unsigned long	value;
+	unsigned long	pc;	/* optional program counter */
+	int		map_id;
+	unsigned char	opcode;	/* one of MMIO_{READ,WRITE,UNKNOWN_OP} */
+	unsigned char	width;	/* size of register access in bytes */
+};
+
+struct mmiotrace_map {
+	resource_size_t	phys;	/* base address in PCI space */
+	unsigned long	virt;	/* base virtual address */
+	unsigned long	len;	/* mapping size */
+	int		map_id;
+	unsigned char	opcode;	/* MMIO_PROBE or MMIO_UNPROBE */
+};
+
+/* in kernel/trace/trace_mmiotrace.c */
+extern void enable_mmiotrace(void);
+extern void disable_mmiotrace(void);
+extern void mmio_trace_rw(struct mmiotrace_rw *rw);
+extern void mmio_trace_mapping(struct mmiotrace_map *map);
+extern int mmio_trace_printk(const char *fmt, va_list args);
+
+#endif /* _LINUX_MMIOTRACE_H */
diff --git a/include/linux/mmtimer.h b/include/linux/mmtimer.h
new file mode 100644
index 00000000..884cabf1
--- /dev/null
+++ b/include/linux/mmtimer.h
@@ -0,0 +1,56 @@
+/*
+ * Intel Multimedia Timer device interface
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2001-2004 Silicon Graphics, Inc.  All rights reserved.
+ *
+ * This file should define an interface compatible with the IA-PC Multimedia
+ * Timers Draft Specification (rev. 0.97) from Intel.  Note that some
+ * hardware may not be able to safely export its registers to userspace,
+ * so the ioctl interface should support all necessary functionality.
+ *
+ * 11/01/01 - jbarnes - initial revision
+ * 9/10/04 - Christoph Lameter - remove interrupt support
+ * 9/17/04 - jbarnes - remove test program, move some #defines to the driver
+ */
+
+#ifndef _LINUX_MMTIMER_H
+#define _LINUX_MMTIMER_H
+
+/*
+ * Breakdown of the ioctl's available.  An 'optional' next to the command
+ * indicates that supporting this command is optional, while 'required'
+ * commands must be implemented if conformance is desired.
+ *
+ * MMTIMER_GETOFFSET - optional
+ *   Should return the offset (relative to the start of the page where the
+ *   registers are mapped) for the counter in question.
+ *
+ * MMTIMER_GETRES - required
+ *   The resolution of the clock in femto (10^-15) seconds
+ *
+ * MMTIMER_GETFREQ - required
+ *   Frequency of the clock in Hz
+ *
+ * MMTIMER_GETBITS - required
+ *   Number of bits in the clock's counter
+ *
+ * MMTIMER_MMAPAVAIL - required
+ *   Returns nonzero if the registers can be mmap'd into userspace, 0 otherwise
+ *
+ * MMTIMER_GETCOUNTER - required
+ *   Gets the current value in the counter
+ */
+#define MMTIMER_IOCTL_BASE 'm'
+
+#define MMTIMER_GETOFFSET _IO(MMTIMER_IOCTL_BASE, 0)
+#define MMTIMER_GETRES _IOR(MMTIMER_IOCTL_BASE, 1, unsigned long)
+#define MMTIMER_GETFREQ _IOR(MMTIMER_IOCTL_BASE, 2, unsigned long)
+#define MMTIMER_GETBITS _IO(MMTIMER_IOCTL_BASE, 4)
+#define MMTIMER_MMAPAVAIL _IO(MMTIMER_IOCTL_BASE, 6)
+#define MMTIMER_GETCOUNTER _IOR(MMTIMER_IOCTL_BASE, 9, unsigned long)
+
+#endif /* _LINUX_MMTIMER_H */
diff --git a/include/linux/mmu_context.h b/include/linux/mmu_context.h
new file mode 100644
index 00000000..70fffeba
--- /dev/null
+++ b/include/linux/mmu_context.h
@@ -0,0 +1,9 @@
+#ifndef _LINUX_MMU_CONTEXT_H
+#define _LINUX_MMU_CONTEXT_H
+
+struct mm_struct;
+
+void use_mm(struct mm_struct *mm);
+void unuse_mm(struct mm_struct *mm);
+
+#endif
diff --git a/include/linux/mmu_notifier.h b/include/linux/mmu_notifier.h
new file mode 100644
index 00000000..1d1b1e13
--- /dev/null
+++ b/include/linux/mmu_notifier.h
@@ -0,0 +1,379 @@
+#ifndef _LINUX_MMU_NOTIFIER_H
+#define _LINUX_MMU_NOTIFIER_H
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/mm_types.h>
+
+struct mmu_notifier;
+struct mmu_notifier_ops;
+
+#ifdef CONFIG_MMU_NOTIFIER
+
+/*
+ * The mmu notifier_mm structure is allocated and installed in
+ * mm->mmu_notifier_mm inside the mm_take_all_locks() protected
+ * critical section and it's released only when mm_count reaches zero
+ * in mmdrop().
+ */
+struct mmu_notifier_mm {
+	/* all mmu notifiers registerd in this mm are queued in this list */
+	struct hlist_head list;
+	/* to serialize the list modifications and hlist_unhashed */
+	spinlock_t lock;
+};
+
+struct mmu_notifier_ops {
+	/*
+	 * Called either by mmu_notifier_unregister or when the mm is
+	 * being destroyed by exit_mmap, always before all pages are
+	 * freed. This can run concurrently with other mmu notifier
+	 * methods (the ones invoked outside the mm context) and it
+	 * should tear down all secondary mmu mappings and freeze the
+	 * secondary mmu. If this method isn't implemented you've to
+	 * be sure that nothing could possibly write to the pages
+	 * through the secondary mmu by the time the last thread with
+	 * tsk->mm == mm exits.
+	 *
+	 * As side note: the pages freed after ->release returns could
+	 * be immediately reallocated by the gart at an alias physical
+	 * address with a different cache model, so if ->release isn't
+	 * implemented because all _software_ driven memory accesses
+	 * through the secondary mmu are terminated by the time the
+	 * last thread of this mm quits, you've also to be sure that
+	 * speculative _hardware_ operations can't allocate dirty
+	 * cachelines in the cpu that could not be snooped and made
+	 * coherent with the other read and write operations happening
+	 * through the gart alias address, so leading to memory
+	 * corruption.
+	 */
+	void (*release)(struct mmu_notifier *mn,
+			struct mm_struct *mm);
+
+	/*
+	 * clear_flush_young is called after the VM is
+	 * test-and-clearing the young/accessed bitflag in the
+	 * pte. This way the VM will provide proper aging to the
+	 * accesses to the page through the secondary MMUs and not
+	 * only to the ones through the Linux pte.
+	 */
+	int (*clear_flush_young)(struct mmu_notifier *mn,
+				 struct mm_struct *mm,
+				 unsigned long address);
+
+	/*
+	 * test_young is called to check the young/accessed bitflag in
+	 * the secondary pte. This is used to know if the page is
+	 * frequently used without actually clearing the flag or tearing
+	 * down the secondary mapping on the page.
+	 */
+	int (*test_young)(struct mmu_notifier *mn,
+			  struct mm_struct *mm,
+			  unsigned long address);
+
+	/*
+	 * change_pte is called in cases that pte mapping to page is changed:
+	 * for example, when ksm remaps pte to point to a new shared page.
+	 */
+	void (*change_pte)(struct mmu_notifier *mn,
+			   struct mm_struct *mm,
+			   unsigned long address,
+			   pte_t pte);
+
+	/*
+	 * Before this is invoked any secondary MMU is still ok to
+	 * read/write to the page previously pointed to by the Linux
+	 * pte because the page hasn't been freed yet and it won't be
+	 * freed until this returns. If required set_page_dirty has to
+	 * be called internally to this method.
+	 */
+	void (*invalidate_page)(struct mmu_notifier *mn,
+				struct mm_struct *mm,
+				unsigned long address);
+
+	/*
+	 * invalidate_range_start() and invalidate_range_end() must be
+	 * paired and are called only when the mmap_sem and/or the
+	 * locks protecting the reverse maps are held. The subsystem
+	 * must guarantee that no additional references are taken to
+	 * the pages in the range established between the call to
+	 * invalidate_range_start() and the matching call to
+	 * invalidate_range_end().
+	 *
+	 * Invalidation of multiple concurrent ranges may be
+	 * optionally permitted by the driver. Either way the
+	 * establishment of sptes is forbidden in the range passed to
+	 * invalidate_range_begin/end for the whole duration of the
+	 * invalidate_range_begin/end critical section.
+	 *
+	 * invalidate_range_start() is called when all pages in the
+	 * range are still mapped and have at least a refcount of one.
+	 *
+	 * invalidate_range_end() is called when all pages in the
+	 * range have been unmapped and the pages have been freed by
+	 * the VM.
+	 *
+	 * The VM will remove the page table entries and potentially
+	 * the page between invalidate_range_start() and
+	 * invalidate_range_end(). If the page must not be freed
+	 * because of pending I/O or other circumstances then the
+	 * invalidate_range_start() callback (or the initial mapping
+	 * by the driver) must make sure that the refcount is kept
+	 * elevated.
+	 *
+	 * If the driver increases the refcount when the pages are
+	 * initially mapped into an address space then either
+	 * invalidate_range_start() or invalidate_range_end() may
+	 * decrease the refcount. If the refcount is decreased on
+	 * invalidate_range_start() then the VM can free pages as page
+	 * table entries are removed.  If the refcount is only
+	 * droppped on invalidate_range_end() then the driver itself
+	 * will drop the last refcount but it must take care to flush
+	 * any secondary tlb before doing the final free on the
+	 * page. Pages will no longer be referenced by the linux
+	 * address space but may still be referenced by sptes until
+	 * the last refcount is dropped.
+	 */
+	void (*invalidate_range_start)(struct mmu_notifier *mn,
+				       struct mm_struct *mm,
+				       unsigned long start, unsigned long end);
+	void (*invalidate_range_end)(struct mmu_notifier *mn,
+				     struct mm_struct *mm,
+				     unsigned long start, unsigned long end);
+};
+
+/*
+ * The notifier chains are protected by mmap_sem and/or the reverse map
+ * semaphores. Notifier chains are only changed when all reverse maps and
+ * the mmap_sem locks are taken.
+ *
+ * Therefore notifier chains can only be traversed when either
+ *
+ * 1. mmap_sem is held.
+ * 2. One of the reverse map locks is held (i_mmap_mutex or anon_vma->mutex).
+ * 3. No other concurrent thread can access the list (release)
+ */
+struct mmu_notifier {
+	struct hlist_node hlist;
+	const struct mmu_notifier_ops *ops;
+};
+
+static inline int mm_has_notifiers(struct mm_struct *mm)
+{
+	return unlikely(mm->mmu_notifier_mm);
+}
+
+extern int mmu_notifier_register(struct mmu_notifier *mn,
+				 struct mm_struct *mm);
+extern int __mmu_notifier_register(struct mmu_notifier *mn,
+				   struct mm_struct *mm);
+extern void mmu_notifier_unregister(struct mmu_notifier *mn,
+				    struct mm_struct *mm);
+extern void __mmu_notifier_mm_destroy(struct mm_struct *mm);
+extern void __mmu_notifier_release(struct mm_struct *mm);
+extern int __mmu_notifier_clear_flush_young(struct mm_struct *mm,
+					  unsigned long address);
+extern int __mmu_notifier_test_young(struct mm_struct *mm,
+				     unsigned long address);
+extern void __mmu_notifier_change_pte(struct mm_struct *mm,
+				      unsigned long address, pte_t pte);
+extern void __mmu_notifier_invalidate_page(struct mm_struct *mm,
+					  unsigned long address);
+extern void __mmu_notifier_invalidate_range_start(struct mm_struct *mm,
+				  unsigned long start, unsigned long end);
+extern void __mmu_notifier_invalidate_range_end(struct mm_struct *mm,
+				  unsigned long start, unsigned long end);
+
+static inline void mmu_notifier_release(struct mm_struct *mm)
+{
+	if (mm_has_notifiers(mm))
+		__mmu_notifier_release(mm);
+}
+
+static inline int mmu_notifier_clear_flush_young(struct mm_struct *mm,
+					  unsigned long address)
+{
+	if (mm_has_notifiers(mm))
+		return __mmu_notifier_clear_flush_young(mm, address);
+	return 0;
+}
+
+static inline int mmu_notifier_test_young(struct mm_struct *mm,
+					  unsigned long address)
+{
+	if (mm_has_notifiers(mm))
+		return __mmu_notifier_test_young(mm, address);
+	return 0;
+}
+
+static inline void mmu_notifier_change_pte(struct mm_struct *mm,
+					   unsigned long address, pte_t pte)
+{
+	if (mm_has_notifiers(mm))
+		__mmu_notifier_change_pte(mm, address, pte);
+}
+
+static inline void mmu_notifier_invalidate_page(struct mm_struct *mm,
+					  unsigned long address)
+{
+	if (mm_has_notifiers(mm))
+		__mmu_notifier_invalidate_page(mm, address);
+}
+
+static inline void mmu_notifier_invalidate_range_start(struct mm_struct *mm,
+				  unsigned long start, unsigned long end)
+{
+	if (mm_has_notifiers(mm))
+		__mmu_notifier_invalidate_range_start(mm, start, end);
+}
+
+static inline void mmu_notifier_invalidate_range_end(struct mm_struct *mm,
+				  unsigned long start, unsigned long end)
+{
+	if (mm_has_notifiers(mm))
+		__mmu_notifier_invalidate_range_end(mm, start, end);
+}
+
+static inline void mmu_notifier_mm_init(struct mm_struct *mm)
+{
+	mm->mmu_notifier_mm = NULL;
+}
+
+static inline void mmu_notifier_mm_destroy(struct mm_struct *mm)
+{
+	if (mm_has_notifiers(mm))
+		__mmu_notifier_mm_destroy(mm);
+}
+
+/*
+ * These two macros will sometime replace ptep_clear_flush.
+ * ptep_clear_flush is implemented as macro itself, so this also is
+ * implemented as a macro until ptep_clear_flush will converted to an
+ * inline function, to diminish the risk of compilation failure. The
+ * invalidate_page method over time can be moved outside the PT lock
+ * and these two macros can be later removed.
+ */
+#define ptep_clear_flush_notify(__vma, __address, __ptep)		\
+({									\
+	pte_t __pte;							\
+	struct vm_area_struct *___vma = __vma;				\
+	unsigned long ___address = __address;				\
+	__pte = ptep_clear_flush(___vma, ___address, __ptep);		\
+	mmu_notifier_invalidate_page(___vma->vm_mm, ___address);	\
+	__pte;								\
+})
+
+#define pmdp_clear_flush_notify(__vma, __address, __pmdp)		\
+({									\
+	pmd_t __pmd;							\
+	struct vm_area_struct *___vma = __vma;				\
+	unsigned long ___address = __address;				\
+	VM_BUG_ON(__address & ~HPAGE_PMD_MASK);				\
+	mmu_notifier_invalidate_range_start(___vma->vm_mm, ___address,	\
+					    (__address)+HPAGE_PMD_SIZE);\
+	__pmd = pmdp_clear_flush(___vma, ___address, __pmdp);		\
+	mmu_notifier_invalidate_range_end(___vma->vm_mm, ___address,	\
+					  (__address)+HPAGE_PMD_SIZE);	\
+	__pmd;								\
+})
+
+#define pmdp_splitting_flush_notify(__vma, __address, __pmdp)		\
+({									\
+	struct vm_area_struct *___vma = __vma;				\
+	unsigned long ___address = __address;				\
+	VM_BUG_ON(__address & ~HPAGE_PMD_MASK);				\
+	mmu_notifier_invalidate_range_start(___vma->vm_mm, ___address,	\
+					    (__address)+HPAGE_PMD_SIZE);\
+	pmdp_splitting_flush(___vma, ___address, __pmdp);		\
+	mmu_notifier_invalidate_range_end(___vma->vm_mm, ___address,	\
+					  (__address)+HPAGE_PMD_SIZE);	\
+})
+
+#define ptep_clear_flush_young_notify(__vma, __address, __ptep)		\
+({									\
+	int __young;							\
+	struct vm_area_struct *___vma = __vma;				\
+	unsigned long ___address = __address;				\
+	__young = ptep_clear_flush_young(___vma, ___address, __ptep);	\
+	__young |= mmu_notifier_clear_flush_young(___vma->vm_mm,	\
+						  ___address);		\
+	__young;							\
+})
+
+#define pmdp_clear_flush_young_notify(__vma, __address, __pmdp)		\
+({									\
+	int __young;							\
+	struct vm_area_struct *___vma = __vma;				\
+	unsigned long ___address = __address;				\
+	__young = pmdp_clear_flush_young(___vma, ___address, __pmdp);	\
+	__young |= mmu_notifier_clear_flush_young(___vma->vm_mm,	\
+						  ___address);		\
+	__young;							\
+})
+
+#define set_pte_at_notify(__mm, __address, __ptep, __pte)		\
+({									\
+	struct mm_struct *___mm = __mm;					\
+	unsigned long ___address = __address;				\
+	pte_t ___pte = __pte;						\
+									\
+	set_pte_at(___mm, ___address, __ptep, ___pte);			\
+	mmu_notifier_change_pte(___mm, ___address, ___pte);		\
+})
+
+#else /* CONFIG_MMU_NOTIFIER */
+
+static inline void mmu_notifier_release(struct mm_struct *mm)
+{
+}
+
+static inline int mmu_notifier_clear_flush_young(struct mm_struct *mm,
+					  unsigned long address)
+{
+	return 0;
+}
+
+static inline int mmu_notifier_test_young(struct mm_struct *mm,
+					  unsigned long address)
+{
+	return 0;
+}
+
+static inline void mmu_notifier_change_pte(struct mm_struct *mm,
+					   unsigned long address, pte_t pte)
+{
+}
+
+static inline void mmu_notifier_invalidate_page(struct mm_struct *mm,
+					  unsigned long address)
+{
+}
+
+static inline void mmu_notifier_invalidate_range_start(struct mm_struct *mm,
+				  unsigned long start, unsigned long end)
+{
+}
+
+static inline void mmu_notifier_invalidate_range_end(struct mm_struct *mm,
+				  unsigned long start, unsigned long end)
+{
+}
+
+static inline void mmu_notifier_mm_init(struct mm_struct *mm)
+{
+}
+
+static inline void mmu_notifier_mm_destroy(struct mm_struct *mm)
+{
+}
+
+#define ptep_clear_flush_young_notify ptep_clear_flush_young
+#define pmdp_clear_flush_young_notify pmdp_clear_flush_young
+#define ptep_clear_flush_notify ptep_clear_flush
+#define pmdp_clear_flush_notify pmdp_clear_flush
+#define pmdp_splitting_flush_notify pmdp_splitting_flush
+#define set_pte_at_notify set_pte_at
+
+#endif /* CONFIG_MMU_NOTIFIER */
+
+#endif /* _LINUX_MMU_NOTIFIER_H */
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
new file mode 100644
index 00000000..5f6806bd
--- /dev/null
+++ b/include/linux/mmzone.h
@@ -0,0 +1,1182 @@
+#ifndef _LINUX_MMZONE_H
+#define _LINUX_MMZONE_H
+
+#ifndef __ASSEMBLY__
+#ifndef __GENERATING_BOUNDS_H
+
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/wait.h>
+#include <linux/bitops.h>
+#include <linux/cache.h>
+#include <linux/threads.h>
+#include <linux/numa.h>
+#include <linux/init.h>
+#include <linux/seqlock.h>
+#include <linux/nodemask.h>
+#include <linux/pageblock-flags.h>
+#include <generated/bounds.h>
+#include <linux/atomic.h>
+#include <asm/page.h>
+
+/* Free memory management - zoned buddy allocator.  */
+#ifndef CONFIG_FORCE_MAX_ZONEORDER
+#define MAX_ORDER 11
+#else
+#define MAX_ORDER CONFIG_FORCE_MAX_ZONEORDER
+#endif
+#define MAX_ORDER_NR_PAGES (1 << (MAX_ORDER - 1))
+
+/*
+ * PAGE_ALLOC_COSTLY_ORDER is the order at which allocations are deemed
+ * costly to service.  That is between allocation orders which should
+ * coelesce naturally under reasonable reclaim pressure and those which
+ * will not.
+ */
+#define PAGE_ALLOC_COSTLY_ORDER 3
+
+#define MIGRATE_UNMOVABLE     0
+#define MIGRATE_RECLAIMABLE   1
+#define MIGRATE_MOVABLE       2
+#define MIGRATE_PCPTYPES      3 /* the number of types on the pcp lists */
+#define MIGRATE_RESERVE       3
+#define MIGRATE_ISOLATE       4 /* can't allocate from here */
+#define MIGRATE_TYPES         5
+
+#define for_each_migratetype_order(order, type) \
+	for (order = 0; order < MAX_ORDER; order++) \
+		for (type = 0; type < MIGRATE_TYPES; type++)
+
+extern int page_group_by_mobility_disabled;
+
+static inline int get_pageblock_migratetype(struct page *page)
+{
+	return get_pageblock_flags_group(page, PB_migrate, PB_migrate_end);
+}
+
+struct free_area {
+	struct list_head	free_list[MIGRATE_TYPES];
+	unsigned long		nr_free;
+};
+
+struct pglist_data;
+
+/*
+ * zone->lock and zone->lru_lock are two of the hottest locks in the kernel.
+ * So add a wild amount of padding here to ensure that they fall into separate
+ * cachelines.  There are very few zone structures in the machine, so space
+ * consumption is not a concern here.
+ */
+#if defined(CONFIG_SMP)
+struct zone_padding {
+	char x[0];
+} ____cacheline_internodealigned_in_smp;
+#define ZONE_PADDING(name)	struct zone_padding name;
+#else
+#define ZONE_PADDING(name)
+#endif
+
+enum zone_stat_item {
+	/* First 128 byte cacheline (assuming 64 bit words) */
+	NR_FREE_PAGES,
+	NR_LRU_BASE,
+	NR_INACTIVE_ANON = NR_LRU_BASE, /* must match order of LRU_[IN]ACTIVE */
+	NR_ACTIVE_ANON,		/*  "     "     "   "       "         */
+	NR_INACTIVE_FILE,	/*  "     "     "   "       "         */
+	NR_ACTIVE_FILE,		/*  "     "     "   "       "         */
+	NR_UNEVICTABLE,		/*  "     "     "   "       "         */
+	NR_MLOCK,		/* mlock()ed pages found and moved off LRU */
+	NR_ANON_PAGES,	/* Mapped anonymous pages */
+	NR_FILE_MAPPED,	/* pagecache pages mapped into pagetables.
+			   only modified from process context */
+	NR_FILE_PAGES,
+	NR_FILE_DIRTY,
+	NR_WRITEBACK,
+	NR_SLAB_RECLAIMABLE,
+	NR_SLAB_UNRECLAIMABLE,
+	NR_PAGETABLE,		/* used for pagetables */
+	NR_KERNEL_STACK,
+	/* Second 128 byte cacheline */
+	NR_UNSTABLE_NFS,	/* NFS unstable pages */
+	NR_BOUNCE,
+	NR_VMSCAN_WRITE,
+	NR_VMSCAN_IMMEDIATE,	/* Prioritise for reclaim when writeback ends */
+	NR_WRITEBACK_TEMP,	/* Writeback using temporary buffers */
+	NR_ISOLATED_ANON,	/* Temporary isolated pages from anon lru */
+	NR_ISOLATED_FILE,	/* Temporary isolated pages from file lru */
+	NR_SHMEM,		/* shmem pages (included tmpfs/GEM pages) */
+	NR_DIRTIED,		/* page dirtyings since bootup */
+	NR_WRITTEN,		/* page writings since bootup */
+#ifdef CONFIG_NUMA
+	NUMA_HIT,		/* allocated in intended node */
+	NUMA_MISS,		/* allocated in non intended node */
+	NUMA_FOREIGN,		/* was intended here, hit elsewhere */
+	NUMA_INTERLEAVE_HIT,	/* interleaver preferred this zone */
+	NUMA_LOCAL,		/* allocation from local node */
+	NUMA_OTHER,		/* allocation from other node */
+#endif
+	NR_ANON_TRANSPARENT_HUGEPAGES,
+	NR_VM_ZONE_STAT_ITEMS };
+
+/*
+ * We do arithmetic on the LRU lists in various places in the code,
+ * so it is important to keep the active lists LRU_ACTIVE higher in
+ * the array than the corresponding inactive lists, and to keep
+ * the *_FILE lists LRU_FILE higher than the corresponding _ANON lists.
+ *
+ * This has to be kept in sync with the statistics in zone_stat_item
+ * above and the descriptions in vmstat_text in mm/vmstat.c
+ */
+#define LRU_BASE 0
+#define LRU_ACTIVE 1
+#define LRU_FILE 2
+
+enum lru_list {
+	LRU_INACTIVE_ANON = LRU_BASE,
+	LRU_ACTIVE_ANON = LRU_BASE + LRU_ACTIVE,
+	LRU_INACTIVE_FILE = LRU_BASE + LRU_FILE,
+	LRU_ACTIVE_FILE = LRU_BASE + LRU_FILE + LRU_ACTIVE,
+	LRU_UNEVICTABLE,
+	NR_LRU_LISTS
+};
+
+#define for_each_lru(lru) for (lru = 0; lru < NR_LRU_LISTS; lru++)
+
+#define for_each_evictable_lru(lru) for (lru = 0; lru <= LRU_ACTIVE_FILE; lru++)
+
+static inline int is_file_lru(enum lru_list lru)
+{
+	return (lru == LRU_INACTIVE_FILE || lru == LRU_ACTIVE_FILE);
+}
+
+static inline int is_active_lru(enum lru_list lru)
+{
+	return (lru == LRU_ACTIVE_ANON || lru == LRU_ACTIVE_FILE);
+}
+
+static inline int is_unevictable_lru(enum lru_list lru)
+{
+	return (lru == LRU_UNEVICTABLE);
+}
+
+struct lruvec {
+	struct list_head lists[NR_LRU_LISTS];
+};
+
+/* Mask used at gathering information at once (see memcontrol.c) */
+#define LRU_ALL_FILE (BIT(LRU_INACTIVE_FILE) | BIT(LRU_ACTIVE_FILE))
+#define LRU_ALL_ANON (BIT(LRU_INACTIVE_ANON) | BIT(LRU_ACTIVE_ANON))
+#define LRU_ALL_EVICTABLE (LRU_ALL_FILE | LRU_ALL_ANON)
+#define LRU_ALL	     ((1 << NR_LRU_LISTS) - 1)
+
+/* Isolate inactive pages */
+#define ISOLATE_INACTIVE	((__force isolate_mode_t)0x1)
+/* Isolate active pages */
+#define ISOLATE_ACTIVE		((__force isolate_mode_t)0x2)
+/* Isolate clean file */
+#define ISOLATE_CLEAN		((__force isolate_mode_t)0x4)
+/* Isolate unmapped file */
+#define ISOLATE_UNMAPPED	((__force isolate_mode_t)0x8)
+/* Isolate for asynchronous migration */
+#define ISOLATE_ASYNC_MIGRATE	((__force isolate_mode_t)0x10)
+
+/* LRU Isolation modes. */
+typedef unsigned __bitwise__ isolate_mode_t;
+
+enum zone_watermarks {
+	WMARK_MIN,
+	WMARK_LOW,
+	WMARK_HIGH,
+	NR_WMARK
+};
+
+#define min_wmark_pages(z) (z->watermark[WMARK_MIN])
+#define low_wmark_pages(z) (z->watermark[WMARK_LOW])
+#define high_wmark_pages(z) (z->watermark[WMARK_HIGH])
+
+struct per_cpu_pages {
+	int count;		/* number of pages in the list */
+	int high;		/* high watermark, emptying needed */
+	int batch;		/* chunk size for buddy add/remove */
+
+	/* Lists of pages, one per migrate type stored on the pcp-lists */
+	struct list_head lists[MIGRATE_PCPTYPES];
+};
+
+struct per_cpu_pageset {
+	struct per_cpu_pages pcp;
+#ifdef CONFIG_NUMA
+	s8 expire;
+#endif
+#ifdef CONFIG_SMP
+	s8 stat_threshold;
+	s8 vm_stat_diff[NR_VM_ZONE_STAT_ITEMS];
+#endif
+};
+
+#endif /* !__GENERATING_BOUNDS.H */
+
+enum zone_type {
+#ifdef CONFIG_ZONE_DMA
+	/*
+	 * ZONE_DMA is used when there are devices that are not able
+	 * to do DMA to all of addressable memory (ZONE_NORMAL). Then we
+	 * carve out the portion of memory that is needed for these devices.
+	 * The range is arch specific.
+	 *
+	 * Some examples
+	 *
+	 * Architecture		Limit
+	 * ---------------------------
+	 * parisc, ia64, sparc	<4G
+	 * s390			<2G
+	 * arm			Various
+	 * alpha		Unlimited or 0-16MB.
+	 *
+	 * i386, x86_64 and multiple other arches
+	 * 			<16M.
+	 */
+	ZONE_DMA,
+#endif
+#ifdef CONFIG_ZONE_DMA32
+	/*
+	 * x86_64 needs two ZONE_DMAs because it supports devices that are
+	 * only able to do DMA to the lower 16M but also 32 bit devices that
+	 * can only do DMA areas below 4G.
+	 */
+	ZONE_DMA32,
+#endif
+	/*
+	 * Normal addressable memory is in ZONE_NORMAL. DMA operations can be
+	 * performed on pages in ZONE_NORMAL if the DMA devices support
+	 * transfers to all addressable memory.
+	 */
+	ZONE_NORMAL,
+#ifdef CONFIG_HIGHMEM
+	/*
+	 * A memory area that is only addressable by the kernel through
+	 * mapping portions into its own address space. This is for example
+	 * used by i386 to allow the kernel to address the memory beyond
+	 * 900MB. The kernel will set up special mappings (page
+	 * table entries on i386) for each page that the kernel needs to
+	 * access.
+	 */
+	ZONE_HIGHMEM,
+#endif
+	ZONE_MOVABLE,
+	__MAX_NR_ZONES
+};
+
+#ifndef __GENERATING_BOUNDS_H
+
+/*
+ * When a memory allocation must conform to specific limitations (such
+ * as being suitable for DMA) the caller will pass in hints to the
+ * allocator in the gfp_mask, in the zone modifier bits.  These bits
+ * are used to select a priority ordered list of memory zones which
+ * match the requested limits. See gfp_zone() in include/linux/gfp.h
+ */
+
+#if MAX_NR_ZONES < 2
+#define ZONES_SHIFT 0
+#elif MAX_NR_ZONES <= 2
+#define ZONES_SHIFT 1
+#elif MAX_NR_ZONES <= 4
+#define ZONES_SHIFT 2
+#else
+#error ZONES_SHIFT -- too many zones configured adjust calculation
+#endif
+
+struct zone_reclaim_stat {
+	/*
+	 * The pageout code in vmscan.c keeps track of how many of the
+	 * mem/swap backed and file backed pages are refeferenced.
+	 * The higher the rotated/scanned ratio, the more valuable
+	 * that cache is.
+	 *
+	 * The anon LRU stats live in [0], file LRU stats in [1]
+	 */
+	unsigned long		recent_rotated[2];
+	unsigned long		recent_scanned[2];
+};
+
+struct zone {
+	/* Fields commonly accessed by the page allocator */
+
+	/* zone watermarks, access with *_wmark_pages(zone) macros */
+	unsigned long watermark[NR_WMARK];
+
+	/*
+	 * When free pages are below this point, additional steps are taken
+	 * when reading the number of free pages to avoid per-cpu counter
+	 * drift allowing watermarks to be breached
+	 */
+	unsigned long percpu_drift_mark;
+
+	/*
+	 * We don't know if the memory that we're going to allocate will be freeable
+	 * or/and it will be released eventually, so to avoid totally wasting several
+	 * GB of ram we must reserve some of the lower zone memory (otherwise we risk
+	 * to run OOM on the lower zones despite there's tons of freeable ram
+	 * on the higher zones). This array is recalculated at runtime if the
+	 * sysctl_lowmem_reserve_ratio sysctl changes.
+	 */
+	unsigned long		lowmem_reserve[MAX_NR_ZONES];
+
+	/*
+	 * This is a per-zone reserve of pages that should not be
+	 * considered dirtyable memory.
+	 */
+	unsigned long		dirty_balance_reserve;
+
+#ifdef CONFIG_NUMA
+	int node;
+	/*
+	 * zone reclaim becomes active if more unmapped pages exist.
+	 */
+	unsigned long		min_unmapped_pages;
+	unsigned long		min_slab_pages;
+#endif
+	struct per_cpu_pageset __percpu *pageset;
+	/*
+	 * free areas of different sizes
+	 */
+	spinlock_t		lock;
+	int                     all_unreclaimable; /* All pages pinned */
+#ifdef CONFIG_MEMORY_HOTPLUG
+	/* see spanned/present_pages for more description */
+	seqlock_t		span_seqlock;
+#endif
+	struct free_area	free_area[MAX_ORDER];
+
+#ifndef CONFIG_SPARSEMEM
+	/*
+	 * Flags for a pageblock_nr_pages block. See pageblock-flags.h.
+	 * In SPARSEMEM, this map is stored in struct mem_section
+	 */
+	unsigned long		*pageblock_flags;
+#endif /* CONFIG_SPARSEMEM */
+
+#ifdef CONFIG_COMPACTION
+	/*
+	 * On compaction failure, 1<<compact_defer_shift compactions
+	 * are skipped before trying again. The number attempted since
+	 * last failure is tracked with compact_considered.
+	 */
+	unsigned int		compact_considered;
+	unsigned int		compact_defer_shift;
+	int			compact_order_failed;
+#endif
+
+	ZONE_PADDING(_pad1_)
+
+	/* Fields commonly accessed by the page reclaim scanner */
+	spinlock_t		lru_lock;
+	struct lruvec		lruvec;
+
+	struct zone_reclaim_stat reclaim_stat;
+
+	unsigned long		pages_scanned;	   /* since last reclaim */
+	unsigned long		flags;		   /* zone flags, see below */
+
+	/* Zone statistics */
+	atomic_long_t		vm_stat[NR_VM_ZONE_STAT_ITEMS];
+
+	/*
+	 * The target ratio of ACTIVE_ANON to INACTIVE_ANON pages on
+	 * this zone's LRU.  Maintained by the pageout code.
+	 */
+	unsigned int inactive_ratio;
+
+
+	ZONE_PADDING(_pad2_)
+	/* Rarely used or read-mostly fields */
+
+	/*
+	 * wait_table		-- the array holding the hash table
+	 * wait_table_hash_nr_entries	-- the size of the hash table array
+	 * wait_table_bits	-- wait_table_size == (1 << wait_table_bits)
+	 *
+	 * The purpose of all these is to keep track of the people
+	 * waiting for a page to become available and make them
+	 * runnable again when possible. The trouble is that this
+	 * consumes a lot of space, especially when so few things
+	 * wait on pages at a given time. So instead of using
+	 * per-page waitqueues, we use a waitqueue hash table.
+	 *
+	 * The bucket discipline is to sleep on the same queue when
+	 * colliding and wake all in that wait queue when removing.
+	 * When something wakes, it must check to be sure its page is
+	 * truly available, a la thundering herd. The cost of a
+	 * collision is great, but given the expected load of the
+	 * table, they should be so rare as to be outweighed by the
+	 * benefits from the saved space.
+	 *
+	 * __wait_on_page_locked() and unlock_page() in mm/filemap.c, are the
+	 * primary users of these fields, and in mm/page_alloc.c
+	 * free_area_init_core() performs the initialization of them.
+	 */
+	wait_queue_head_t	* wait_table;
+	unsigned long		wait_table_hash_nr_entries;
+	unsigned long		wait_table_bits;
+
+	/*
+	 * Discontig memory support fields.
+	 */
+	struct pglist_data	*zone_pgdat;
+	/* zone_start_pfn == zone_start_paddr >> PAGE_SHIFT */
+	unsigned long		zone_start_pfn;
+
+	/*
+	 * zone_start_pfn, spanned_pages and present_pages are all
+	 * protected by span_seqlock.  It is a seqlock because it has
+	 * to be read outside of zone->lock, and it is done in the main
+	 * allocator path.  But, it is written quite infrequently.
+	 *
+	 * The lock is declared along with zone->lock because it is
+	 * frequently read in proximity to zone->lock.  It's good to
+	 * give them a chance of being in the same cacheline.
+	 */
+	unsigned long		spanned_pages;	/* total size, including holes */
+	unsigned long		present_pages;	/* amount of memory (excluding holes) */
+
+	/*
+	 * rarely used fields:
+	 */
+	const char		*name;
+} ____cacheline_internodealigned_in_smp;
+
+typedef enum {
+	ZONE_RECLAIM_LOCKED,		/* prevents concurrent reclaim */
+	ZONE_OOM_LOCKED,		/* zone is in OOM killer zonelist */
+	ZONE_CONGESTED,			/* zone has many dirty pages backed by
+					 * a congested BDI
+					 */
+} zone_flags_t;
+
+static inline void zone_set_flag(struct zone *zone, zone_flags_t flag)
+{
+	set_bit(flag, &zone->flags);
+}
+
+static inline int zone_test_and_set_flag(struct zone *zone, zone_flags_t flag)
+{
+	return test_and_set_bit(flag, &zone->flags);
+}
+
+static inline void zone_clear_flag(struct zone *zone, zone_flags_t flag)
+{
+	clear_bit(flag, &zone->flags);
+}
+
+static inline int zone_is_reclaim_congested(const struct zone *zone)
+{
+	return test_bit(ZONE_CONGESTED, &zone->flags);
+}
+
+static inline int zone_is_reclaim_locked(const struct zone *zone)
+{
+	return test_bit(ZONE_RECLAIM_LOCKED, &zone->flags);
+}
+
+static inline int zone_is_oom_locked(const struct zone *zone)
+{
+	return test_bit(ZONE_OOM_LOCKED, &zone->flags);
+}
+
+/*
+ * The "priority" of VM scanning is how much of the queues we will scan in one
+ * go. A value of 12 for DEF_PRIORITY implies that we will scan 1/4096th of the
+ * queues ("queue_length >> 12") during an aging round.
+ */
+#define DEF_PRIORITY 12
+
+/* Maximum number of zones on a zonelist */
+#define MAX_ZONES_PER_ZONELIST (MAX_NUMNODES * MAX_NR_ZONES)
+
+#ifdef CONFIG_NUMA
+
+/*
+ * The NUMA zonelists are doubled because we need zonelists that restrict the
+ * allocations to a single node for GFP_THISNODE.
+ *
+ * [0]	: Zonelist with fallback
+ * [1]	: No fallback (GFP_THISNODE)
+ */
+#define MAX_ZONELISTS 2
+
+
+/*
+ * We cache key information from each zonelist for smaller cache
+ * footprint when scanning for free pages in get_page_from_freelist().
+ *
+ * 1) The BITMAP fullzones tracks which zones in a zonelist have come
+ *    up short of free memory since the last time (last_fullzone_zap)
+ *    we zero'd fullzones.
+ * 2) The array z_to_n[] maps each zone in the zonelist to its node
+ *    id, so that we can efficiently evaluate whether that node is
+ *    set in the current tasks mems_allowed.
+ *
+ * Both fullzones and z_to_n[] are one-to-one with the zonelist,
+ * indexed by a zones offset in the zonelist zones[] array.
+ *
+ * The get_page_from_freelist() routine does two scans.  During the
+ * first scan, we skip zones whose corresponding bit in 'fullzones'
+ * is set or whose corresponding node in current->mems_allowed (which
+ * comes from cpusets) is not set.  During the second scan, we bypass
+ * this zonelist_cache, to ensure we look methodically at each zone.
+ *
+ * Once per second, we zero out (zap) fullzones, forcing us to
+ * reconsider nodes that might have regained more free memory.
+ * The field last_full_zap is the time we last zapped fullzones.
+ *
+ * This mechanism reduces the amount of time we waste repeatedly
+ * reexaming zones for free memory when they just came up low on
+ * memory momentarilly ago.
+ *
+ * The zonelist_cache struct members logically belong in struct
+ * zonelist.  However, the mempolicy zonelists constructed for
+ * MPOL_BIND are intentionally variable length (and usually much
+ * shorter).  A general purpose mechanism for handling structs with
+ * multiple variable length members is more mechanism than we want
+ * here.  We resort to some special case hackery instead.
+ *
+ * The MPOL_BIND zonelists don't need this zonelist_cache (in good
+ * part because they are shorter), so we put the fixed length stuff
+ * at the front of the zonelist struct, ending in a variable length
+ * zones[], as is needed by MPOL_BIND.
+ *
+ * Then we put the optional zonelist cache on the end of the zonelist
+ * struct.  This optional stuff is found by a 'zlcache_ptr' pointer in
+ * the fixed length portion at the front of the struct.  This pointer
+ * both enables us to find the zonelist cache, and in the case of
+ * MPOL_BIND zonelists, (which will just set the zlcache_ptr to NULL)
+ * to know that the zonelist cache is not there.
+ *
+ * The end result is that struct zonelists come in two flavors:
+ *  1) The full, fixed length version, shown below, and
+ *  2) The custom zonelists for MPOL_BIND.
+ * The custom MPOL_BIND zonelists have a NULL zlcache_ptr and no zlcache.
+ *
+ * Even though there may be multiple CPU cores on a node modifying
+ * fullzones or last_full_zap in the same zonelist_cache at the same
+ * time, we don't lock it.  This is just hint data - if it is wrong now
+ * and then, the allocator will still function, perhaps a bit slower.
+ */
+
+
+struct zonelist_cache {
+	unsigned short z_to_n[MAX_ZONES_PER_ZONELIST];		/* zone->nid */
+	DECLARE_BITMAP(fullzones, MAX_ZONES_PER_ZONELIST);	/* zone full? */
+	unsigned long last_full_zap;		/* when last zap'd (jiffies) */
+};
+#else
+#define MAX_ZONELISTS 1
+struct zonelist_cache;
+#endif
+
+/*
+ * This struct contains information about a zone in a zonelist. It is stored
+ * here to avoid dereferences into large structures and lookups of tables
+ */
+struct zoneref {
+	struct zone *zone;	/* Pointer to actual zone */
+	int zone_idx;		/* zone_idx(zoneref->zone) */
+};
+
+/*
+ * One allocation request operates on a zonelist. A zonelist
+ * is a list of zones, the first one is the 'goal' of the
+ * allocation, the other zones are fallback zones, in decreasing
+ * priority.
+ *
+ * If zlcache_ptr is not NULL, then it is just the address of zlcache,
+ * as explained above.  If zlcache_ptr is NULL, there is no zlcache.
+ * *
+ * To speed the reading of the zonelist, the zonerefs contain the zone index
+ * of the entry being read. Helper functions to access information given
+ * a struct zoneref are
+ *
+ * zonelist_zone()	- Return the struct zone * for an entry in _zonerefs
+ * zonelist_zone_idx()	- Return the index of the zone for an entry
+ * zonelist_node_idx()	- Return the index of the node for an entry
+ */
+struct zonelist {
+	struct zonelist_cache *zlcache_ptr;		     // NULL or &zlcache
+	struct zoneref _zonerefs[MAX_ZONES_PER_ZONELIST + 1];
+#ifdef CONFIG_NUMA
+	struct zonelist_cache zlcache;			     // optional ...
+#endif
+};
+
+#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
+struct node_active_region {
+	unsigned long start_pfn;
+	unsigned long end_pfn;
+	int nid;
+};
+#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
+
+#ifndef CONFIG_DISCONTIGMEM
+/* The array of struct pages - for discontigmem use pgdat->lmem_map */
+extern struct page *mem_map;
+#endif
+
+/*
+ * The pg_data_t structure is used in machines with CONFIG_DISCONTIGMEM
+ * (mostly NUMA machines?) to denote a higher-level memory zone than the
+ * zone denotes.
+ *
+ * On NUMA machines, each NUMA node would have a pg_data_t to describe
+ * it's memory layout.
+ *
+ * Memory statistics and page replacement data structures are maintained on a
+ * per-zone basis.
+ */
+struct bootmem_data;
+typedef struct pglist_data {
+	struct zone node_zones[MAX_NR_ZONES];
+	struct zonelist node_zonelists[MAX_ZONELISTS];
+	int nr_zones;
+#ifdef CONFIG_FLAT_NODE_MEM_MAP	/* means !SPARSEMEM */
+	struct page *node_mem_map;
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
+	struct page_cgroup *node_page_cgroup;
+#endif
+#endif
+#ifndef CONFIG_NO_BOOTMEM
+	struct bootmem_data *bdata;
+#endif
+#ifdef CONFIG_MEMORY_HOTPLUG
+	/*
+	 * Must be held any time you expect node_start_pfn, node_present_pages
+	 * or node_spanned_pages stay constant.  Holding this will also
+	 * guarantee that any pfn_valid() stays that way.
+	 *
+	 * Nests above zone->lock and zone->size_seqlock.
+	 */
+	spinlock_t node_size_lock;
+#endif
+	unsigned long node_start_pfn;
+	unsigned long node_present_pages; /* total number of physical pages */
+	unsigned long node_spanned_pages; /* total size of physical page
+					     range, including holes */
+	int node_id;
+	wait_queue_head_t kswapd_wait;
+	struct task_struct *kswapd;	/* Protected by lock_memory_hotplug() */
+	int kswapd_max_order;
+	enum zone_type classzone_idx;
+} pg_data_t;
+
+#define node_present_pages(nid)	(NODE_DATA(nid)->node_present_pages)
+#define node_spanned_pages(nid)	(NODE_DATA(nid)->node_spanned_pages)
+#ifdef CONFIG_FLAT_NODE_MEM_MAP
+#define pgdat_page_nr(pgdat, pagenr)	((pgdat)->node_mem_map + (pagenr))
+#else
+#define pgdat_page_nr(pgdat, pagenr)	pfn_to_page((pgdat)->node_start_pfn + (pagenr))
+#endif
+#define nid_page_nr(nid, pagenr) 	pgdat_page_nr(NODE_DATA(nid),(pagenr))
+
+#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
+
+#define node_end_pfn(nid) ({\
+	pg_data_t *__pgdat = NODE_DATA(nid);\
+	__pgdat->node_start_pfn + __pgdat->node_spanned_pages;\
+})
+
+#include <linux/memory_hotplug.h>
+
+extern struct mutex zonelists_mutex;
+void build_all_zonelists(void *data);
+void wakeup_kswapd(struct zone *zone, int order, enum zone_type classzone_idx);
+bool zone_watermark_ok(struct zone *z, int order, unsigned long mark,
+		int classzone_idx, int alloc_flags);
+bool zone_watermark_ok_safe(struct zone *z, int order, unsigned long mark,
+		int classzone_idx, int alloc_flags);
+enum memmap_context {
+	MEMMAP_EARLY,
+	MEMMAP_HOTPLUG,
+};
+extern int init_currently_empty_zone(struct zone *zone, unsigned long start_pfn,
+				     unsigned long size,
+				     enum memmap_context context);
+
+#ifdef CONFIG_HAVE_MEMORY_PRESENT
+void memory_present(int nid, unsigned long start, unsigned long end);
+#else
+static inline void memory_present(int nid, unsigned long start, unsigned long end) {}
+#endif
+
+#ifdef CONFIG_HAVE_MEMORYLESS_NODES
+int local_memory_node(int node_id);
+#else
+static inline int local_memory_node(int node_id) { return node_id; };
+#endif
+
+#ifdef CONFIG_NEED_NODE_MEMMAP_SIZE
+unsigned long __init node_memmap_size_bytes(int, unsigned long, unsigned long);
+#endif
+
+/*
+ * zone_idx() returns 0 for the ZONE_DMA zone, 1 for the ZONE_NORMAL zone, etc.
+ */
+#define zone_idx(zone)		((zone) - (zone)->zone_pgdat->node_zones)
+
+static inline int populated_zone(struct zone *zone)
+{
+	return (!!zone->present_pages);
+}
+
+extern int movable_zone;
+
+static inline int zone_movable_is_highmem(void)
+{
+#if defined(CONFIG_HIGHMEM) && defined(CONFIG_HAVE_MEMBLOCK_NODE)
+	return movable_zone == ZONE_HIGHMEM;
+#else
+	return 0;
+#endif
+}
+
+static inline int is_highmem_idx(enum zone_type idx)
+{
+#ifdef CONFIG_HIGHMEM
+	return (idx == ZONE_HIGHMEM ||
+		(idx == ZONE_MOVABLE && zone_movable_is_highmem()));
+#else
+	return 0;
+#endif
+}
+
+static inline int is_normal_idx(enum zone_type idx)
+{
+	return (idx == ZONE_NORMAL);
+}
+
+/**
+ * is_highmem - helper function to quickly check if a struct zone is a 
+ *              highmem zone or not.  This is an attempt to keep references
+ *              to ZONE_{DMA/NORMAL/HIGHMEM/etc} in general code to a minimum.
+ * @zone - pointer to struct zone variable
+ */
+static inline int is_highmem(struct zone *zone)
+{
+#ifdef CONFIG_HIGHMEM
+	int zone_off = (char *)zone - (char *)zone->zone_pgdat->node_zones;
+	return zone_off == ZONE_HIGHMEM * sizeof(*zone) ||
+	       (zone_off == ZONE_MOVABLE * sizeof(*zone) &&
+		zone_movable_is_highmem());
+#else
+	return 0;
+#endif
+}
+
+static inline int is_normal(struct zone *zone)
+{
+	return zone == zone->zone_pgdat->node_zones + ZONE_NORMAL;
+}
+
+static inline int is_dma32(struct zone *zone)
+{
+#ifdef CONFIG_ZONE_DMA32
+	return zone == zone->zone_pgdat->node_zones + ZONE_DMA32;
+#else
+	return 0;
+#endif
+}
+
+static inline int is_dma(struct zone *zone)
+{
+#ifdef CONFIG_ZONE_DMA
+	return zone == zone->zone_pgdat->node_zones + ZONE_DMA;
+#else
+	return 0;
+#endif
+}
+
+/* These two functions are used to setup the per zone pages min values */
+struct ctl_table;
+int min_free_kbytes_sysctl_handler(struct ctl_table *, int,
+					void __user *, size_t *, loff_t *);
+extern int sysctl_lowmem_reserve_ratio[MAX_NR_ZONES-1];
+int lowmem_reserve_ratio_sysctl_handler(struct ctl_table *, int,
+					void __user *, size_t *, loff_t *);
+int percpu_pagelist_fraction_sysctl_handler(struct ctl_table *, int,
+					void __user *, size_t *, loff_t *);
+int sysctl_min_unmapped_ratio_sysctl_handler(struct ctl_table *, int,
+			void __user *, size_t *, loff_t *);
+int sysctl_min_slab_ratio_sysctl_handler(struct ctl_table *, int,
+			void __user *, size_t *, loff_t *);
+
+extern int numa_zonelist_order_handler(struct ctl_table *, int,
+			void __user *, size_t *, loff_t *);
+extern char numa_zonelist_order[];
+#define NUMA_ZONELIST_ORDER_LEN 16	/* string buffer size */
+
+#ifndef CONFIG_NEED_MULTIPLE_NODES
+
+extern struct pglist_data contig_page_data;
+#define NODE_DATA(nid)		(&contig_page_data)
+#define NODE_MEM_MAP(nid)	mem_map
+
+#else /* CONFIG_NEED_MULTIPLE_NODES */
+
+#include <asm/mmzone.h>
+
+#endif /* !CONFIG_NEED_MULTIPLE_NODES */
+
+extern struct pglist_data *first_online_pgdat(void);
+extern struct pglist_data *next_online_pgdat(struct pglist_data *pgdat);
+extern struct zone *next_zone(struct zone *zone);
+
+/**
+ * for_each_online_pgdat - helper macro to iterate over all online nodes
+ * @pgdat - pointer to a pg_data_t variable
+ */
+#define for_each_online_pgdat(pgdat)			\
+	for (pgdat = first_online_pgdat();		\
+	     pgdat;					\
+	     pgdat = next_online_pgdat(pgdat))
+/**
+ * for_each_zone - helper macro to iterate over all memory zones
+ * @zone - pointer to struct zone variable
+ *
+ * The user only needs to declare the zone variable, for_each_zone
+ * fills it in.
+ */
+#define for_each_zone(zone)			        \
+	for (zone = (first_online_pgdat())->node_zones; \
+	     zone;					\
+	     zone = next_zone(zone))
+
+#define for_each_populated_zone(zone)		        \
+	for (zone = (first_online_pgdat())->node_zones; \
+	     zone;					\
+	     zone = next_zone(zone))			\
+		if (!populated_zone(zone))		\
+			; /* do nothing */		\
+		else
+
+static inline struct zone *zonelist_zone(struct zoneref *zoneref)
+{
+	return zoneref->zone;
+}
+
+static inline int zonelist_zone_idx(struct zoneref *zoneref)
+{
+	return zoneref->zone_idx;
+}
+
+static inline int zonelist_node_idx(struct zoneref *zoneref)
+{
+#ifdef CONFIG_NUMA
+	/* zone_to_nid not available in this context */
+	return zoneref->zone->node;
+#else
+	return 0;
+#endif /* CONFIG_NUMA */
+}
+
+/**
+ * next_zones_zonelist - Returns the next zone at or below highest_zoneidx within the allowed nodemask using a cursor within a zonelist as a starting point
+ * @z - The cursor used as a starting point for the search
+ * @highest_zoneidx - The zone index of the highest zone to return
+ * @nodes - An optional nodemask to filter the zonelist with
+ * @zone - The first suitable zone found is returned via this parameter
+ *
+ * This function returns the next zone at or below a given zone index that is
+ * within the allowed nodemask using a cursor as the starting point for the
+ * search. The zoneref returned is a cursor that represents the current zone
+ * being examined. It should be advanced by one before calling
+ * next_zones_zonelist again.
+ */
+struct zoneref *next_zones_zonelist(struct zoneref *z,
+					enum zone_type highest_zoneidx,
+					nodemask_t *nodes,
+					struct zone **zone);
+
+/**
+ * first_zones_zonelist - Returns the first zone at or below highest_zoneidx within the allowed nodemask in a zonelist
+ * @zonelist - The zonelist to search for a suitable zone
+ * @highest_zoneidx - The zone index of the highest zone to return
+ * @nodes - An optional nodemask to filter the zonelist with
+ * @zone - The first suitable zone found is returned via this parameter
+ *
+ * This function returns the first zone at or below a given zone index that is
+ * within the allowed nodemask. The zoneref returned is a cursor that can be
+ * used to iterate the zonelist with next_zones_zonelist by advancing it by
+ * one before calling.
+ */
+static inline struct zoneref *first_zones_zonelist(struct zonelist *zonelist,
+					enum zone_type highest_zoneidx,
+					nodemask_t *nodes,
+					struct zone **zone)
+{
+	return next_zones_zonelist(zonelist->_zonerefs, highest_zoneidx, nodes,
+								zone);
+}
+
+/**
+ * for_each_zone_zonelist_nodemask - helper macro to iterate over valid zones in a zonelist at or below a given zone index and within a nodemask
+ * @zone - The current zone in the iterator
+ * @z - The current pointer within zonelist->zones being iterated
+ * @zlist - The zonelist being iterated
+ * @highidx - The zone index of the highest zone to return
+ * @nodemask - Nodemask allowed by the allocator
+ *
+ * This iterator iterates though all zones at or below a given zone index and
+ * within a given nodemask
+ */
+#define for_each_zone_zonelist_nodemask(zone, z, zlist, highidx, nodemask) \
+	for (z = first_zones_zonelist(zlist, highidx, nodemask, &zone);	\
+		zone;							\
+		z = next_zones_zonelist(++z, highidx, nodemask, &zone))	\
+
+/**
+ * for_each_zone_zonelist - helper macro to iterate over valid zones in a zonelist at or below a given zone index
+ * @zone - The current zone in the iterator
+ * @z - The current pointer within zonelist->zones being iterated
+ * @zlist - The zonelist being iterated
+ * @highidx - The zone index of the highest zone to return
+ *
+ * This iterator iterates though all zones at or below a given zone index.
+ */
+#define for_each_zone_zonelist(zone, z, zlist, highidx) \
+	for_each_zone_zonelist_nodemask(zone, z, zlist, highidx, NULL)
+
+#ifdef CONFIG_SPARSEMEM
+#include <asm/sparsemem.h>
+#endif
+
+#if !defined(CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID) && \
+	!defined(CONFIG_HAVE_MEMBLOCK_NODE_MAP)
+static inline unsigned long early_pfn_to_nid(unsigned long pfn)
+{
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_FLATMEM
+#define pfn_to_nid(pfn)		(0)
+#endif
+
+#ifdef CONFIG_SPARSEMEM
+
+/*
+ * SECTION_SHIFT    		#bits space required to store a section #
+ *
+ * PA_SECTION_SHIFT		physical address to/from section number
+ * PFN_SECTION_SHIFT		pfn to/from section number
+ */
+#define SECTIONS_SHIFT		(MAX_PHYSMEM_BITS - SECTION_SIZE_BITS)
+
+#define PA_SECTION_SHIFT	(SECTION_SIZE_BITS)
+#define PFN_SECTION_SHIFT	(SECTION_SIZE_BITS - PAGE_SHIFT)
+
+#define NR_MEM_SECTIONS		(1UL << SECTIONS_SHIFT)
+
+#define PAGES_PER_SECTION       (1UL << PFN_SECTION_SHIFT)
+#define PAGE_SECTION_MASK	(~(PAGES_PER_SECTION-1))
+
+#define SECTION_BLOCKFLAGS_BITS \
+	((1UL << (PFN_SECTION_SHIFT - pageblock_order)) * NR_PAGEBLOCK_BITS)
+
+#if (MAX_ORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS
+#error Allocator MAX_ORDER exceeds SECTION_SIZE
+#endif
+
+#define pfn_to_section_nr(pfn) ((pfn) >> PFN_SECTION_SHIFT)
+#define section_nr_to_pfn(sec) ((sec) << PFN_SECTION_SHIFT)
+
+#define SECTION_ALIGN_UP(pfn)	(((pfn) + PAGES_PER_SECTION - 1) & PAGE_SECTION_MASK)
+#define SECTION_ALIGN_DOWN(pfn)	((pfn) & PAGE_SECTION_MASK)
+
+struct page;
+struct page_cgroup;
+struct mem_section {
+	/*
+	 * This is, logically, a pointer to an array of struct
+	 * pages.  However, it is stored with some other magic.
+	 * (see sparse.c::sparse_init_one_section())
+	 *
+	 * Additionally during early boot we encode node id of
+	 * the location of the section here to guide allocation.
+	 * (see sparse.c::memory_present())
+	 *
+	 * Making it a UL at least makes someone do a cast
+	 * before using it wrong.
+	 */
+	unsigned long section_mem_map;
+
+	/* See declaration of similar field in struct zone */
+	unsigned long *pageblock_flags;
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
+	/*
+	 * If !SPARSEMEM, pgdat doesn't have page_cgroup pointer. We use
+	 * section. (see memcontrol.h/page_cgroup.h about this.)
+	 */
+	struct page_cgroup *page_cgroup;
+	unsigned long pad;
+#endif
+};
+
+#ifdef CONFIG_SPARSEMEM_EXTREME
+#define SECTIONS_PER_ROOT       (PAGE_SIZE / sizeof (struct mem_section))
+#else
+#define SECTIONS_PER_ROOT	1
+#endif
+
+#define SECTION_NR_TO_ROOT(sec)	((sec) / SECTIONS_PER_ROOT)
+#define NR_SECTION_ROOTS	DIV_ROUND_UP(NR_MEM_SECTIONS, SECTIONS_PER_ROOT)
+#define SECTION_ROOT_MASK	(SECTIONS_PER_ROOT - 1)
+
+#ifdef CONFIG_SPARSEMEM_EXTREME
+extern struct mem_section *mem_section[NR_SECTION_ROOTS];
+#else
+extern struct mem_section mem_section[NR_SECTION_ROOTS][SECTIONS_PER_ROOT];
+#endif
+
+static inline struct mem_section *__nr_to_section(unsigned long nr)
+{
+	if (!mem_section[SECTION_NR_TO_ROOT(nr)])
+		return NULL;
+	return &mem_section[SECTION_NR_TO_ROOT(nr)][nr & SECTION_ROOT_MASK];
+}
+extern int __section_nr(struct mem_section* ms);
+extern unsigned long usemap_size(void);
+
+/*
+ * We use the lower bits of the mem_map pointer to store
+ * a little bit of information.  There should be at least
+ * 3 bits here due to 32-bit alignment.
+ */
+#define	SECTION_MARKED_PRESENT	(1UL<<0)
+#define SECTION_HAS_MEM_MAP	(1UL<<1)
+#define SECTION_MAP_LAST_BIT	(1UL<<2)
+#define SECTION_MAP_MASK	(~(SECTION_MAP_LAST_BIT-1))
+#define SECTION_NID_SHIFT	2
+
+static inline struct page *__section_mem_map_addr(struct mem_section *section)
+{
+	unsigned long map = section->section_mem_map;
+	map &= SECTION_MAP_MASK;
+	return (struct page *)map;
+}
+
+static inline int present_section(struct mem_section *section)
+{
+	return (section && (section->section_mem_map & SECTION_MARKED_PRESENT));
+}
+
+static inline int present_section_nr(unsigned long nr)
+{
+	return present_section(__nr_to_section(nr));
+}
+
+static inline int valid_section(struct mem_section *section)
+{
+	return (section && (section->section_mem_map & SECTION_HAS_MEM_MAP));
+}
+
+static inline int valid_section_nr(unsigned long nr)
+{
+	return valid_section(__nr_to_section(nr));
+}
+
+static inline struct mem_section *__pfn_to_section(unsigned long pfn)
+{
+	return __nr_to_section(pfn_to_section_nr(pfn));
+}
+
+#ifndef CONFIG_HAVE_ARCH_PFN_VALID
+static inline int pfn_valid(unsigned long pfn)
+{
+	if (pfn_to_section_nr(pfn) >= NR_MEM_SECTIONS)
+		return 0;
+	return valid_section(__nr_to_section(pfn_to_section_nr(pfn)));
+}
+#endif
+
+static inline int pfn_present(unsigned long pfn)
+{
+	if (pfn_to_section_nr(pfn) >= NR_MEM_SECTIONS)
+		return 0;
+	return present_section(__nr_to_section(pfn_to_section_nr(pfn)));
+}
+
+/*
+ * These are _only_ used during initialisation, therefore they
+ * can use __initdata ...  They could have names to indicate
+ * this restriction.
+ */
+#ifdef CONFIG_NUMA
+#define pfn_to_nid(pfn)							\
+({									\
+	unsigned long __pfn_to_nid_pfn = (pfn);				\
+	page_to_nid(pfn_to_page(__pfn_to_nid_pfn));			\
+})
+#else
+#define pfn_to_nid(pfn)		(0)
+#endif
+
+#define early_pfn_valid(pfn)	pfn_valid(pfn)
+void sparse_init(void);
+#else
+#define sparse_init()	do {} while (0)
+#define sparse_index_init(_sec, _nid)  do {} while (0)
+#endif /* CONFIG_SPARSEMEM */
+
+#ifdef CONFIG_NODES_SPAN_OTHER_NODES
+bool early_pfn_in_nid(unsigned long pfn, int nid);
+#else
+#define early_pfn_in_nid(pfn, nid)	(1)
+#endif
+
+#ifndef early_pfn_valid
+#define early_pfn_valid(pfn)	(1)
+#endif
+
+void memory_present(int nid, unsigned long start, unsigned long end);
+unsigned long __init node_memmap_size_bytes(int, unsigned long, unsigned long);
+
+/*
+ * If it is possible to have holes within a MAX_ORDER_NR_PAGES, then we
+ * need to check pfn validility within that MAX_ORDER_NR_PAGES block.
+ * pfn_valid_within() should be used in this case; we optimise this away
+ * when we have no holes within a MAX_ORDER_NR_PAGES block.
+ */
+#ifdef CONFIG_HOLES_IN_ZONE
+#define pfn_valid_within(pfn) pfn_valid(pfn)
+#else
+#define pfn_valid_within(pfn) (1)
+#endif
+
+#ifdef CONFIG_ARCH_HAS_HOLES_MEMORYMODEL
+/*
+ * pfn_valid() is meant to be able to tell if a given PFN has valid memmap
+ * associated with it or not. In FLATMEM, it is expected that holes always
+ * have valid memmap as long as there is valid PFNs either side of the hole.
+ * In SPARSEMEM, it is assumed that a valid section has a memmap for the
+ * entire section.
+ *
+ * However, an ARM, and maybe other embedded architectures in the future
+ * free memmap backing holes to save memory on the assumption the memmap is
+ * never used. The page_zone linkages are then broken even though pfn_valid()
+ * returns true. A walker of the full memmap must then do this additional
+ * check to ensure the memmap they are looking at is sane by making sure
+ * the zone and PFN linkages are still valid. This is expensive, but walkers
+ * of the full memmap are extremely rare.
+ */
+int memmap_valid_within(unsigned long pfn,
+					struct page *page, struct zone *zone);
+#else
+static inline int memmap_valid_within(unsigned long pfn,
+					struct page *page, struct zone *zone)
+{
+	return 1;
+}
+#endif /* CONFIG_ARCH_HAS_HOLES_MEMORYMODEL */
+
+#endif /* !__GENERATING_BOUNDS.H */
+#endif /* !__ASSEMBLY__ */
+#endif /* _LINUX_MMZONE_H */
diff --git a/include/linux/mnt_namespace.h b/include/linux/mnt_namespace.h
new file mode 100644
index 00000000..5a8e3903
--- /dev/null
+++ b/include/linux/mnt_namespace.h
@@ -0,0 +1,17 @@
+#ifndef _NAMESPACE_H_
+#define _NAMESPACE_H_
+#ifdef __KERNEL__
+
+struct mnt_namespace;
+struct fs_struct;
+
+extern struct mnt_namespace *copy_mnt_ns(unsigned long, struct mnt_namespace *,
+		struct fs_struct *);
+extern void put_mnt_ns(struct mnt_namespace *ns);
+
+extern const struct file_operations proc_mounts_operations;
+extern const struct file_operations proc_mountinfo_operations;
+extern const struct file_operations proc_mountstats_operations;
+
+#endif
+#endif
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
new file mode 100644
index 00000000..501da4cb
--- /dev/null
+++ b/include/linux/mod_devicetable.h
@@ -0,0 +1,593 @@
+/*
+ * Device tables which are exported to userspace via
+ * scripts/mod/file2alias.c.  You must keep that file in sync with this
+ * header.
+ */
+
+#ifndef LINUX_MOD_DEVICETABLE_H
+#define LINUX_MOD_DEVICETABLE_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+#define PCI_ANY_ID (~0)
+
+struct pci_device_id {
+	__u32 vendor, device;		/* Vendor and device ID or PCI_ANY_ID*/
+	__u32 subvendor, subdevice;	/* Subsystem ID's or PCI_ANY_ID */
+	__u32 class, class_mask;	/* (class,subclass,prog-if) triplet */
+	kernel_ulong_t driver_data;	/* Data private to the driver */
+};
+
+
+#define IEEE1394_MATCH_VENDOR_ID	0x0001
+#define IEEE1394_MATCH_MODEL_ID		0x0002
+#define IEEE1394_MATCH_SPECIFIER_ID	0x0004
+#define IEEE1394_MATCH_VERSION		0x0008
+
+struct ieee1394_device_id {
+	__u32 match_flags;
+	__u32 vendor_id;
+	__u32 model_id;
+	__u32 specifier_id;
+	__u32 version;
+	kernel_ulong_t driver_data
+		__attribute__((aligned(sizeof(kernel_ulong_t))));
+};
+
+
+/*
+ * Device table entry for "new style" table-driven USB drivers.
+ * User mode code can read these tables to choose which modules to load.
+ * Declare the table as a MODULE_DEVICE_TABLE.
+ *
+ * A probe() parameter will point to a matching entry from this table.
+ * Use the driver_info field for each match to hold information tied
+ * to that match:  device quirks, etc.
+ *
+ * Terminate the driver's table with an all-zeroes entry.
+ * Use the flag values to control which fields are compared.
+ */
+
+/**
+ * struct usb_device_id - identifies USB devices for probing and hotplugging
+ * @match_flags: Bit mask controlling of the other fields are used to match
+ *	against new devices.  Any field except for driver_info may be used,
+ *	although some only make sense in conjunction with other fields.
+ *	This is usually set by a USB_DEVICE_*() macro, which sets all
+ *	other fields in this structure except for driver_info.
+ * @idVendor: USB vendor ID for a device; numbers are assigned
+ *	by the USB forum to its members.
+ * @idProduct: Vendor-assigned product ID.
+ * @bcdDevice_lo: Low end of range of vendor-assigned product version numbers.
+ *	This is also used to identify individual product versions, for
+ *	a range consisting of a single device.
+ * @bcdDevice_hi: High end of version number range.  The range of product
+ *	versions is inclusive.
+ * @bDeviceClass: Class of device; numbers are assigned
+ *	by the USB forum.  Products may choose to implement classes,
+ *	or be vendor-specific.  Device classes specify behavior of all
+ *	the interfaces on a devices.
+ * @bDeviceSubClass: Subclass of device; associated with bDeviceClass.
+ * @bDeviceProtocol: Protocol of device; associated with bDeviceClass.
+ * @bInterfaceClass: Class of interface; numbers are assigned
+ *	by the USB forum.  Products may choose to implement classes,
+ *	or be vendor-specific.  Interface classes specify behavior only
+ *	of a given interface; other interfaces may support other classes.
+ * @bInterfaceSubClass: Subclass of interface; associated with bInterfaceClass.
+ * @bInterfaceProtocol: Protocol of interface; associated with bInterfaceClass.
+ * @driver_info: Holds information used by the driver.  Usually it holds
+ *	a pointer to a descriptor understood by the driver, or perhaps
+ *	device flags.
+ *
+ * In most cases, drivers will create a table of device IDs by using
+ * USB_DEVICE(), or similar macros designed for that purpose.
+ * They will then export it to userspace using MODULE_DEVICE_TABLE(),
+ * and provide it to the USB core through their usb_driver structure.
+ *
+ * See the usb_match_id() function for information about how matches are
+ * performed.  Briefly, you will normally use one of several macros to help
+ * construct these entries.  Each entry you provide will either identify
+ * one or more specific products, or will identify a class of products
+ * which have agreed to behave the same.  You should put the more specific
+ * matches towards the beginning of your table, so that driver_info can
+ * record quirks of specific products.
+ */
+struct usb_device_id {
+	/* which fields to match against? */
+	__u16		match_flags;
+
+	/* Used for product specific matches; range is inclusive */
+	__u16		idVendor;
+	__u16		idProduct;
+	__u16		bcdDevice_lo;
+	__u16		bcdDevice_hi;
+
+	/* Used for device class matches */
+	__u8		bDeviceClass;
+	__u8		bDeviceSubClass;
+	__u8		bDeviceProtocol;
+
+	/* Used for interface class matches */
+	__u8		bInterfaceClass;
+	__u8		bInterfaceSubClass;
+	__u8		bInterfaceProtocol;
+
+	/* not matched against */
+	kernel_ulong_t	driver_info;
+};
+
+/* Some useful macros to use to create struct usb_device_id */
+#define USB_DEVICE_ID_MATCH_VENDOR		0x0001
+#define USB_DEVICE_ID_MATCH_PRODUCT		0x0002
+#define USB_DEVICE_ID_MATCH_DEV_LO		0x0004
+#define USB_DEVICE_ID_MATCH_DEV_HI		0x0008
+#define USB_DEVICE_ID_MATCH_DEV_CLASS		0x0010
+#define USB_DEVICE_ID_MATCH_DEV_SUBCLASS	0x0020
+#define USB_DEVICE_ID_MATCH_DEV_PROTOCOL	0x0040
+#define USB_DEVICE_ID_MATCH_INT_CLASS		0x0080
+#define USB_DEVICE_ID_MATCH_INT_SUBCLASS	0x0100
+#define USB_DEVICE_ID_MATCH_INT_PROTOCOL	0x0200
+
+#define HID_ANY_ID				(~0)
+
+struct hid_device_id {
+	__u16 bus;
+	__u16 pad1;
+	__u32 vendor;
+	__u32 product;
+	kernel_ulong_t driver_data
+		__attribute__((aligned(sizeof(kernel_ulong_t))));
+};
+
+/* s390 CCW devices */
+struct ccw_device_id {
+	__u16	match_flags;	/* which fields to match against */
+
+	__u16	cu_type;	/* control unit type     */
+	__u16	dev_type;	/* device type           */
+	__u8	cu_model;	/* control unit model    */
+	__u8	dev_model;	/* device model          */
+
+	kernel_ulong_t driver_info;
+};
+
+#define CCW_DEVICE_ID_MATCH_CU_TYPE		0x01
+#define CCW_DEVICE_ID_MATCH_CU_MODEL		0x02
+#define CCW_DEVICE_ID_MATCH_DEVICE_TYPE		0x04
+#define CCW_DEVICE_ID_MATCH_DEVICE_MODEL	0x08
+
+/* s390 AP bus devices */
+struct ap_device_id {
+	__u16 match_flags;	/* which fields to match against */
+	__u8 dev_type;		/* device type */
+	__u8 pad1;
+	__u32 pad2;
+	kernel_ulong_t driver_info;
+};
+
+#define AP_DEVICE_ID_MATCH_DEVICE_TYPE		0x01
+
+/* s390 css bus devices (subchannels) */
+struct css_device_id {
+	__u8 match_flags;
+	__u8 type; /* subchannel type */
+	__u16 pad2;
+	__u32 pad3;
+	kernel_ulong_t driver_data;
+};
+
+#define ACPI_ID_LEN	16 /* only 9 bytes needed here, 16 bytes are used */
+			   /* to workaround crosscompile issues */
+
+struct acpi_device_id {
+	__u8 id[ACPI_ID_LEN];
+	kernel_ulong_t driver_data;
+};
+
+#define PNP_ID_LEN	8
+#define PNP_MAX_DEVICES	8
+
+struct pnp_device_id {
+	__u8 id[PNP_ID_LEN];
+	kernel_ulong_t driver_data;
+};
+
+struct pnp_card_device_id {
+	__u8 id[PNP_ID_LEN];
+	kernel_ulong_t driver_data;
+	struct {
+		__u8 id[PNP_ID_LEN];
+	} devs[PNP_MAX_DEVICES];
+};
+
+
+#define SERIO_ANY	0xff
+
+struct serio_device_id {
+	__u8 type;
+	__u8 extra;
+	__u8 id;
+	__u8 proto;
+};
+
+/*
+ * Struct used for matching a device
+ */
+struct of_device_id
+{
+	char	name[32];
+	char	type[32];
+	char	compatible[128];
+#ifdef __KERNEL__
+	void	*data;
+#else
+	kernel_ulong_t data;
+#endif
+};
+
+/* VIO */
+struct vio_device_id {
+	char type[32];
+	char compat[32];
+};
+
+/* PCMCIA */
+
+struct pcmcia_device_id {
+	__u16		match_flags;
+
+	__u16		manf_id;
+	__u16 		card_id;
+
+	__u8  		func_id;
+
+	/* for real multi-function devices */
+	__u8  		function;
+
+	/* for pseudo multi-function devices */
+	__u8  		device_no;
+
+	__u32 		prod_id_hash[4]
+		__attribute__((aligned(sizeof(__u32))));
+
+	/* not matched against in kernelspace*/
+#ifdef __KERNEL__
+	const char *	prod_id[4];
+#else
+	kernel_ulong_t	prod_id[4]
+		__attribute__((aligned(sizeof(kernel_ulong_t))));
+#endif
+
+	/* not matched against */
+	kernel_ulong_t	driver_info;
+#ifdef __KERNEL__
+	char *		cisfile;
+#else
+	kernel_ulong_t	cisfile;
+#endif
+};
+
+#define PCMCIA_DEV_ID_MATCH_MANF_ID	0x0001
+#define PCMCIA_DEV_ID_MATCH_CARD_ID	0x0002
+#define PCMCIA_DEV_ID_MATCH_FUNC_ID	0x0004
+#define PCMCIA_DEV_ID_MATCH_FUNCTION	0x0008
+#define PCMCIA_DEV_ID_MATCH_PROD_ID1	0x0010
+#define PCMCIA_DEV_ID_MATCH_PROD_ID2	0x0020
+#define PCMCIA_DEV_ID_MATCH_PROD_ID3	0x0040
+#define PCMCIA_DEV_ID_MATCH_PROD_ID4	0x0080
+#define PCMCIA_DEV_ID_MATCH_DEVICE_NO	0x0100
+#define PCMCIA_DEV_ID_MATCH_FAKE_CIS	0x0200
+#define PCMCIA_DEV_ID_MATCH_ANONYMOUS	0x0400
+
+/* Input */
+#define INPUT_DEVICE_ID_EV_MAX		0x1f
+#define INPUT_DEVICE_ID_KEY_MIN_INTERESTING	0x71
+#define INPUT_DEVICE_ID_KEY_MAX		0x2ff
+#define INPUT_DEVICE_ID_REL_MAX		0x0f
+#define INPUT_DEVICE_ID_ABS_MAX		0x3f
+#define INPUT_DEVICE_ID_MSC_MAX		0x07
+#define INPUT_DEVICE_ID_LED_MAX		0x0f
+#define INPUT_DEVICE_ID_SND_MAX		0x07
+#define INPUT_DEVICE_ID_FF_MAX		0x7f
+#define INPUT_DEVICE_ID_SW_MAX		0x0f
+
+#define INPUT_DEVICE_ID_MATCH_BUS	1
+#define INPUT_DEVICE_ID_MATCH_VENDOR	2
+#define INPUT_DEVICE_ID_MATCH_PRODUCT	4
+#define INPUT_DEVICE_ID_MATCH_VERSION	8
+
+#define INPUT_DEVICE_ID_MATCH_EVBIT	0x0010
+#define INPUT_DEVICE_ID_MATCH_KEYBIT	0x0020
+#define INPUT_DEVICE_ID_MATCH_RELBIT	0x0040
+#define INPUT_DEVICE_ID_MATCH_ABSBIT	0x0080
+#define INPUT_DEVICE_ID_MATCH_MSCIT	0x0100
+#define INPUT_DEVICE_ID_MATCH_LEDBIT	0x0200
+#define INPUT_DEVICE_ID_MATCH_SNDBIT	0x0400
+#define INPUT_DEVICE_ID_MATCH_FFBIT	0x0800
+#define INPUT_DEVICE_ID_MATCH_SWBIT	0x1000
+
+struct input_device_id {
+
+	kernel_ulong_t flags;
+
+	__u16 bustype;
+	__u16 vendor;
+	__u16 product;
+	__u16 version;
+
+	kernel_ulong_t evbit[INPUT_DEVICE_ID_EV_MAX / BITS_PER_LONG + 1];
+	kernel_ulong_t keybit[INPUT_DEVICE_ID_KEY_MAX / BITS_PER_LONG + 1];
+	kernel_ulong_t relbit[INPUT_DEVICE_ID_REL_MAX / BITS_PER_LONG + 1];
+	kernel_ulong_t absbit[INPUT_DEVICE_ID_ABS_MAX / BITS_PER_LONG + 1];
+	kernel_ulong_t mscbit[INPUT_DEVICE_ID_MSC_MAX / BITS_PER_LONG + 1];
+	kernel_ulong_t ledbit[INPUT_DEVICE_ID_LED_MAX / BITS_PER_LONG + 1];
+	kernel_ulong_t sndbit[INPUT_DEVICE_ID_SND_MAX / BITS_PER_LONG + 1];
+	kernel_ulong_t ffbit[INPUT_DEVICE_ID_FF_MAX / BITS_PER_LONG + 1];
+	kernel_ulong_t swbit[INPUT_DEVICE_ID_SW_MAX / BITS_PER_LONG + 1];
+
+	kernel_ulong_t driver_info;
+};
+
+/* EISA */
+
+#define EISA_SIG_LEN   8
+
+/* The EISA signature, in ASCII form, null terminated */
+struct eisa_device_id {
+	char          sig[EISA_SIG_LEN];
+	kernel_ulong_t driver_data;
+};
+
+#define EISA_DEVICE_MODALIAS_FMT "eisa:s%s"
+
+struct parisc_device_id {
+	__u8	hw_type;	/* 5 bits used */
+	__u8	hversion_rev;	/* 4 bits */
+	__u16	hversion;	/* 12 bits */
+	__u32	sversion;	/* 20 bits */
+};
+
+#define PA_HWTYPE_ANY_ID	0xff
+#define PA_HVERSION_REV_ANY_ID	0xff
+#define PA_HVERSION_ANY_ID	0xffff
+#define PA_SVERSION_ANY_ID	0xffffffff
+
+/* SDIO */
+
+#define SDIO_ANY_ID (~0)
+
+struct sdio_device_id {
+	__u8	class;			/* Standard interface or SDIO_ANY_ID */
+	__u16	vendor;			/* Vendor or SDIO_ANY_ID */
+	__u16	device;			/* Device ID or SDIO_ANY_ID */
+	kernel_ulong_t driver_data	/* Data private to the driver */
+		__attribute__((aligned(sizeof(kernel_ulong_t))));
+};
+
+/* SSB core, see drivers/ssb/ */
+struct ssb_device_id {
+	__u16	vendor;
+	__u16	coreid;
+	__u8	revision;
+};
+#define SSB_DEVICE(_vendor, _coreid, _revision)  \
+	{ .vendor = _vendor, .coreid = _coreid, .revision = _revision, }
+#define SSB_DEVTABLE_END  \
+	{ 0, },
+
+#define SSB_ANY_VENDOR		0xFFFF
+#define SSB_ANY_ID		0xFFFF
+#define SSB_ANY_REV		0xFF
+
+/* Broadcom's specific AMBA core, see drivers/bcma/ */
+struct bcma_device_id {
+	__u16	manuf;
+	__u16	id;
+	__u8	rev;
+	__u8	class;
+};
+#define BCMA_CORE(_manuf, _id, _rev, _class)  \
+	{ .manuf = _manuf, .id = _id, .rev = _rev, .class = _class, }
+#define BCMA_CORETABLE_END  \
+	{ 0, },
+
+#define BCMA_ANY_MANUF		0xFFFF
+#define BCMA_ANY_ID		0xFFFF
+#define BCMA_ANY_REV		0xFF
+#define BCMA_ANY_CLASS		0xFF
+
+struct virtio_device_id {
+	__u32 device;
+	__u32 vendor;
+};
+#define VIRTIO_DEV_ANY_ID	0xffffffff
+
+/*
+ * For Hyper-V devices we use the device guid as the id.
+ */
+struct hv_vmbus_device_id {
+	__u8 guid[16];
+	kernel_ulong_t driver_data	/* Data private to the driver */
+			__attribute__((aligned(sizeof(kernel_ulong_t))));
+};
+
+/* rpmsg */
+
+#define RPMSG_NAME_SIZE			32
+#define RPMSG_DEVICE_MODALIAS_FMT	"rpmsg:%s"
+
+struct rpmsg_device_id {
+	char name[RPMSG_NAME_SIZE];
+};
+
+/* i2c */
+
+#define I2C_NAME_SIZE	20
+#define I2C_MODULE_PREFIX "i2c:"
+
+struct i2c_device_id {
+	char name[I2C_NAME_SIZE];
+	kernel_ulong_t driver_data	/* Data private to the driver */
+			__attribute__((aligned(sizeof(kernel_ulong_t))));
+};
+
+/* spi */
+
+#define SPI_NAME_SIZE	32
+#define SPI_MODULE_PREFIX "spi:"
+
+struct spi_device_id {
+	char name[SPI_NAME_SIZE];
+	kernel_ulong_t driver_data	/* Data private to the driver */
+			__attribute__((aligned(sizeof(kernel_ulong_t))));
+};
+
+/* dmi */
+enum dmi_field {
+	DMI_NONE,
+	DMI_BIOS_VENDOR,
+	DMI_BIOS_VERSION,
+	DMI_BIOS_DATE,
+	DMI_SYS_VENDOR,
+	DMI_PRODUCT_NAME,
+	DMI_PRODUCT_VERSION,
+	DMI_PRODUCT_SERIAL,
+	DMI_PRODUCT_UUID,
+	DMI_BOARD_VENDOR,
+	DMI_BOARD_NAME,
+	DMI_BOARD_VERSION,
+	DMI_BOARD_SERIAL,
+	DMI_BOARD_ASSET_TAG,
+	DMI_CHASSIS_VENDOR,
+	DMI_CHASSIS_TYPE,
+	DMI_CHASSIS_VERSION,
+	DMI_CHASSIS_SERIAL,
+	DMI_CHASSIS_ASSET_TAG,
+	DMI_STRING_MAX,
+};
+
+struct dmi_strmatch {
+	unsigned char slot;
+	char substr[79];
+};
+
+#ifndef __KERNEL__
+struct dmi_system_id {
+	kernel_ulong_t callback;
+	kernel_ulong_t ident;
+	struct dmi_strmatch matches[4];
+	kernel_ulong_t driver_data
+			__attribute__((aligned(sizeof(kernel_ulong_t))));
+};
+#else
+struct dmi_system_id {
+	int (*callback)(const struct dmi_system_id *);
+	const char *ident;
+	struct dmi_strmatch matches[4];
+	void *driver_data;
+};
+/*
+ * struct dmi_device_id appears during expansion of
+ * "MODULE_DEVICE_TABLE(dmi, x)". Compiler doesn't look inside it
+ * but this is enough for gcc 3.4.6 to error out:
+ *	error: storage size of '__mod_dmi_device_table' isn't known
+ */
+#define dmi_device_id dmi_system_id
+#endif
+
+#define DMI_MATCH(a, b)	{ a, b }
+
+#define PLATFORM_NAME_SIZE	20
+#define PLATFORM_MODULE_PREFIX	"platform:"
+
+struct platform_device_id {
+	char name[PLATFORM_NAME_SIZE];
+	kernel_ulong_t driver_data
+			__attribute__((aligned(sizeof(kernel_ulong_t))));
+};
+
+#define MDIO_MODULE_PREFIX	"mdio:"
+
+#define MDIO_ID_FMT "%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d"
+#define MDIO_ID_ARGS(_id) \
+	(_id)>>31, ((_id)>>30) & 1, ((_id)>>29) & 1, ((_id)>>28) & 1,	\
+	((_id)>>27) & 1, ((_id)>>26) & 1, ((_id)>>25) & 1, ((_id)>>24) & 1, \
+	((_id)>>23) & 1, ((_id)>>22) & 1, ((_id)>>21) & 1, ((_id)>>20) & 1, \
+	((_id)>>19) & 1, ((_id)>>18) & 1, ((_id)>>17) & 1, ((_id)>>16) & 1, \
+	((_id)>>15) & 1, ((_id)>>14) & 1, ((_id)>>13) & 1, ((_id)>>12) & 1, \
+	((_id)>>11) & 1, ((_id)>>10) & 1, ((_id)>>9) & 1, ((_id)>>8) & 1, \
+	((_id)>>7) & 1, ((_id)>>6) & 1, ((_id)>>5) & 1, ((_id)>>4) & 1, \
+	((_id)>>3) & 1, ((_id)>>2) & 1, ((_id)>>1) & 1, (_id) & 1
+
+/**
+ * struct mdio_device_id - identifies PHY devices on an MDIO/MII bus
+ * @phy_id: The result of
+ *     (mdio_read(&MII_PHYSID1) << 16 | mdio_read(&PHYSID2)) & @phy_id_mask
+ *     for this PHY type
+ * @phy_id_mask: Defines the significant bits of @phy_id.  A value of 0
+ *     is used to terminate an array of struct mdio_device_id.
+ */
+struct mdio_device_id {
+	__u32 phy_id;
+	__u32 phy_id_mask;
+};
+
+struct zorro_device_id {
+	__u32 id;			/* Device ID or ZORRO_WILDCARD */
+	kernel_ulong_t driver_data;	/* Data private to the driver */
+};
+
+#define ZORRO_WILDCARD			(0xffffffff)	/* not official */
+
+#define ZORRO_DEVICE_MODALIAS_FMT	"zorro:i%08X"
+
+#define ISAPNP_ANY_ID		0xffff
+struct isapnp_device_id {
+	unsigned short card_vendor, card_device;
+	unsigned short vendor, function;
+	kernel_ulong_t driver_data;	/* data private to the driver */
+};
+
+/**
+ * struct amba_id - identifies a device on an AMBA bus
+ * @id: The significant bits if the hardware device ID
+ * @mask: Bitmask specifying which bits of the id field are significant when
+ *	matching.  A driver binds to a device when ((hardware device ID) & mask)
+ *	== id.
+ * @data: Private data used by the driver.
+ */
+struct amba_id {
+	unsigned int		id;
+	unsigned int		mask;
+#ifndef __KERNEL__
+	kernel_ulong_t		data;
+#else
+	void			*data;
+#endif
+};
+
+/*
+ * Match x86 CPUs for CPU specific drivers.
+ * See documentation of "x86_match_cpu" for details.
+ */
+
+struct x86_cpu_id {
+	__u16 vendor;
+	__u16 family;
+	__u16 model;
+	__u16 feature;	/* bit index */
+	kernel_ulong_t driver_data;
+};
+
+#define X86_FEATURE_MATCH(x) \
+	{ X86_VENDOR_ANY, X86_FAMILY_ANY, X86_MODEL_ANY, x }
+
+#define X86_VENDOR_ANY 0xffff
+#define X86_FAMILY_ANY 0
+#define X86_MODEL_ANY  0
+#define X86_FEATURE_ANY 0	/* Same as FPU, you can't test for that */
+
+#endif /* LINUX_MOD_DEVICETABLE_H */
diff --git a/include/linux/module.h b/include/linux/module.h
new file mode 100644
index 00000000..fbcafe2e
--- /dev/null
+++ b/include/linux/module.h
@@ -0,0 +1,651 @@
+#ifndef _LINUX_MODULE_H
+#define _LINUX_MODULE_H
+/*
+ * Dynamic loading of modules into the kernel.
+ *
+ * Rewritten by Richard Henderson <rth@tamu.edu> Dec 1996
+ * Rewritten again by Rusty Russell, 2002
+ */
+#include <linux/list.h>
+#include <linux/stat.h>
+#include <linux/compiler.h>
+#include <linux/cache.h>
+#include <linux/kmod.h>
+#include <linux/elf.h>
+#include <linux/stringify.h>
+#include <linux/kobject.h>
+#include <linux/moduleparam.h>
+#include <linux/tracepoint.h>
+#include <linux/export.h>
+
+#include <linux/percpu.h>
+#include <asm/module.h>
+
+/* Not Yet Implemented */
+#define MODULE_SUPPORTED_DEVICE(name)
+
+#define MODULE_NAME_LEN MAX_PARAM_PREFIX_LEN
+
+struct modversion_info
+{
+	unsigned long crc;
+	char name[MODULE_NAME_LEN];
+};
+
+struct module;
+
+struct module_kobject {
+	struct kobject kobj;
+	struct module *mod;
+	struct kobject *drivers_dir;
+	struct module_param_attrs *mp;
+};
+
+struct module_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct module_attribute *, struct module_kobject *,
+			char *);
+	ssize_t (*store)(struct module_attribute *, struct module_kobject *,
+			 const char *, size_t count);
+	void (*setup)(struct module *, const char *);
+	int (*test)(struct module *);
+	void (*free)(struct module *);
+};
+
+struct module_version_attribute {
+	struct module_attribute mattr;
+	const char *module_name;
+	const char *version;
+} __attribute__ ((__aligned__(sizeof(void *))));
+
+extern ssize_t __modver_version_show(struct module_attribute *,
+				     struct module_kobject *, char *);
+
+extern struct module_attribute module_uevent;
+
+/* These are either module local, or the kernel's dummy ones. */
+extern int init_module(void);
+extern void cleanup_module(void);
+
+/* Archs provide a method of finding the correct exception table. */
+struct exception_table_entry;
+
+const struct exception_table_entry *
+search_extable(const struct exception_table_entry *first,
+	       const struct exception_table_entry *last,
+	       unsigned long value);
+void sort_extable(struct exception_table_entry *start,
+		  struct exception_table_entry *finish);
+void sort_main_extable(void);
+void trim_init_extable(struct module *m);
+
+#ifdef MODULE
+#define MODULE_GENERIC_TABLE(gtype,name)			\
+extern const struct gtype##_id __mod_##gtype##_table		\
+  __attribute__ ((unused, alias(__stringify(name))))
+
+#else  /* !MODULE */
+#define MODULE_GENERIC_TABLE(gtype,name)
+#endif
+
+/* Generic info of form tag = "info" */
+#define MODULE_INFO(tag, info) __MODULE_INFO(tag, tag, info)
+
+/* For userspace: you can also call me... */
+#define MODULE_ALIAS(_alias) MODULE_INFO(alias, _alias)
+
+/*
+ * The following license idents are currently accepted as indicating free
+ * software modules
+ *
+ *	"GPL"				[GNU Public License v2 or later]
+ *	"GPL v2"			[GNU Public License v2]
+ *	"GPL and additional rights"	[GNU Public License v2 rights and more]
+ *	"Dual BSD/GPL"			[GNU Public License v2
+ *					 or BSD license choice]
+ *	"Dual MIT/GPL"			[GNU Public License v2
+ *					 or MIT license choice]
+ *	"Dual MPL/GPL"			[GNU Public License v2
+ *					 or Mozilla license choice]
+ *
+ * The following other idents are available
+ *
+ *	"Proprietary"			[Non free products]
+ *
+ * There are dual licensed components, but when running with Linux it is the
+ * GPL that is relevant so this is a non issue. Similarly LGPL linked with GPL
+ * is a GPL combined work.
+ *
+ * This exists for several reasons
+ * 1.	So modinfo can show license info for users wanting to vet their setup 
+ *	is free
+ * 2.	So the community can ignore bug reports including proprietary modules
+ * 3.	So vendors can do likewise based on their own policies
+ */
+#define MODULE_LICENSE(_license) MODULE_INFO(license, _license)
+
+/*
+ * Author(s), use "Name <email>" or just "Name", for multiple
+ * authors use multiple MODULE_AUTHOR() statements/lines.
+ */
+#define MODULE_AUTHOR(_author) MODULE_INFO(author, _author)
+  
+/* What your module does. */
+#define MODULE_DESCRIPTION(_description) MODULE_INFO(description, _description)
+
+#define MODULE_DEVICE_TABLE(type,name)		\
+  MODULE_GENERIC_TABLE(type##_device,name)
+
+/* Version of form [<epoch>:]<version>[-<extra-version>].
+   Or for CVS/RCS ID version, everything but the number is stripped.
+  <epoch>: A (small) unsigned integer which allows you to start versions
+           anew. If not mentioned, it's zero.  eg. "2:1.0" is after
+	   "1:2.0".
+  <version>: The <version> may contain only alphanumerics and the
+           character `.'.  Ordered by numeric sort for numeric parts,
+	   ascii sort for ascii parts (as per RPM or DEB algorithm).
+  <extraversion>: Like <version>, but inserted for local
+           customizations, eg "rh3" or "rusty1".
+
+  Using this automatically adds a checksum of the .c files and the
+  local headers in "srcversion".
+*/
+
+#if defined(MODULE) || !defined(CONFIG_SYSFS)
+#define MODULE_VERSION(_version) MODULE_INFO(version, _version)
+#else
+#define MODULE_VERSION(_version)					\
+	static struct module_version_attribute ___modver_attr = {	\
+		.mattr	= {						\
+			.attr	= {					\
+				.name	= "version",			\
+				.mode	= S_IRUGO,			\
+			},						\
+			.show	= __modver_version_show,		\
+		},							\
+		.module_name	= KBUILD_MODNAME,			\
+		.version	= _version,				\
+	};								\
+	static const struct module_version_attribute			\
+	__used __attribute__ ((__section__ ("__modver")))		\
+	* __moduleparam_const __modver_attr = &___modver_attr
+#endif
+
+/* Optional firmware file (or files) needed by the module
+ * format is simply firmware file name.  Multiple firmware
+ * files require multiple MODULE_FIRMWARE() specifiers */
+#define MODULE_FIRMWARE(_firmware) MODULE_INFO(firmware, _firmware)
+
+/* Given an address, look for it in the exception tables */
+const struct exception_table_entry *search_exception_tables(unsigned long add);
+
+struct notifier_block;
+
+#ifdef CONFIG_MODULES
+
+extern int modules_disabled; /* for sysctl */
+/* Get/put a kernel symbol (calls must be symmetric) */
+void *__symbol_get(const char *symbol);
+void *__symbol_get_gpl(const char *symbol);
+#define symbol_get(x) ((typeof(&x))(__symbol_get(MODULE_SYMBOL_PREFIX #x)))
+
+/* modules using other modules: kdb wants to see this. */
+struct module_use {
+	struct list_head source_list;
+	struct list_head target_list;
+	struct module *source, *target;
+};
+
+enum module_state
+{
+	MODULE_STATE_LIVE,
+	MODULE_STATE_COMING,
+	MODULE_STATE_GOING,
+};
+
+/**
+ * struct module_ref - per cpu module reference counts
+ * @incs: number of module get on this cpu
+ * @decs: number of module put on this cpu
+ *
+ * We force an alignment on 8 or 16 bytes, so that alloc_percpu()
+ * put @incs/@decs in same cache line, with no extra memory cost,
+ * since alloc_percpu() is fine grained.
+ */
+struct module_ref {
+	unsigned long incs;
+	unsigned long decs;
+} __attribute((aligned(2 * sizeof(unsigned long))));
+
+struct module
+{
+	enum module_state state;
+
+	/* Member of list of modules */
+	struct list_head list;
+
+	/* Unique handle for this module */
+	char name[MODULE_NAME_LEN];
+
+	/* Sysfs stuff. */
+	struct module_kobject mkobj;
+	struct module_attribute *modinfo_attrs;
+	const char *version;
+	const char *srcversion;
+	struct kobject *holders_dir;
+
+	/* Exported symbols */
+	const struct kernel_symbol *syms;
+	const unsigned long *crcs;
+	unsigned int num_syms;
+
+	/* Kernel parameters. */
+	struct kernel_param *kp;
+	unsigned int num_kp;
+
+	/* GPL-only exported symbols. */
+	unsigned int num_gpl_syms;
+	const struct kernel_symbol *gpl_syms;
+	const unsigned long *gpl_crcs;
+
+#ifdef CONFIG_UNUSED_SYMBOLS
+	/* unused exported symbols. */
+	const struct kernel_symbol *unused_syms;
+	const unsigned long *unused_crcs;
+	unsigned int num_unused_syms;
+
+	/* GPL-only, unused exported symbols. */
+	unsigned int num_unused_gpl_syms;
+	const struct kernel_symbol *unused_gpl_syms;
+	const unsigned long *unused_gpl_crcs;
+#endif
+
+	/* symbols that will be GPL-only in the near future. */
+	const struct kernel_symbol *gpl_future_syms;
+	const unsigned long *gpl_future_crcs;
+	unsigned int num_gpl_future_syms;
+
+	/* Exception table */
+	unsigned int num_exentries;
+	struct exception_table_entry *extable;
+
+	/* Startup function. */
+	int (*init)(void);
+
+	/* If this is non-NULL, vfree after init() returns */
+	void *module_init;
+
+	/* Here is the actual code + data, vfree'd on unload. */
+	void *module_core;
+
+	/* Here are the sizes of the init and core sections */
+	unsigned int init_size, core_size;
+
+	/* The size of the executable code in each section.  */
+	unsigned int init_text_size, core_text_size;
+
+	/* Size of RO sections of the module (text+rodata) */
+	unsigned int init_ro_size, core_ro_size;
+
+	/* Arch-specific module values */
+	struct mod_arch_specific arch;
+
+	unsigned int taints;	/* same bits as kernel:tainted */
+
+#ifdef CONFIG_GENERIC_BUG
+	/* Support for BUG */
+	unsigned num_bugs;
+	struct list_head bug_list;
+	struct bug_entry *bug_table;
+#endif
+
+#ifdef CONFIG_KALLSYMS
+	/*
+	 * We keep the symbol and string tables for kallsyms.
+	 * The core_* fields below are temporary, loader-only (they
+	 * could really be discarded after module init).
+	 */
+	Elf_Sym *symtab, *core_symtab;
+	unsigned int num_symtab, core_num_syms;
+	char *strtab, *core_strtab;
+
+	/* Section attributes */
+	struct module_sect_attrs *sect_attrs;
+
+	/* Notes attributes */
+	struct module_notes_attrs *notes_attrs;
+#endif
+
+	/* The command line arguments (may be mangled).  People like
+	   keeping pointers to this stuff */
+	char *args;
+
+#ifdef CONFIG_SMP
+	/* Per-cpu data. */
+	void __percpu *percpu;
+	unsigned int percpu_size;
+#endif
+
+#ifdef CONFIG_TRACEPOINTS
+	unsigned int num_tracepoints;
+	struct tracepoint * const *tracepoints_ptrs;
+#endif
+#ifdef HAVE_JUMP_LABEL
+	struct jump_entry *jump_entries;
+	unsigned int num_jump_entries;
+#endif
+#ifdef CONFIG_TRACING
+	unsigned int num_trace_bprintk_fmt;
+	const char **trace_bprintk_fmt_start;
+#endif
+#ifdef CONFIG_EVENT_TRACING
+	struct ftrace_event_call **trace_events;
+	unsigned int num_trace_events;
+#endif
+#ifdef CONFIG_FTRACE_MCOUNT_RECORD
+	unsigned int num_ftrace_callsites;
+	unsigned long *ftrace_callsites;
+#endif
+
+#ifdef CONFIG_MODULE_UNLOAD
+	/* What modules depend on me? */
+	struct list_head source_list;
+	/* What modules do I depend on? */
+	struct list_head target_list;
+
+	/* Who is waiting for us to be unloaded */
+	struct task_struct *waiter;
+
+	/* Destruction function. */
+	void (*exit)(void);
+
+	struct module_ref __percpu *refptr;
+#endif
+
+#ifdef CONFIG_CONSTRUCTORS
+	/* Constructor functions. */
+	ctor_fn_t *ctors;
+	unsigned int num_ctors;
+#endif
+};
+#ifndef MODULE_ARCH_INIT
+#define MODULE_ARCH_INIT {}
+#endif
+
+extern struct mutex module_mutex;
+
+/* FIXME: It'd be nice to isolate modules during init, too, so they
+   aren't used before they (may) fail.  But presently too much code
+   (IDE & SCSI) require entry into the module during init.*/
+static inline int module_is_live(struct module *mod)
+{
+	return mod->state != MODULE_STATE_GOING;
+}
+
+struct module *__module_text_address(unsigned long addr);
+struct module *__module_address(unsigned long addr);
+bool is_module_address(unsigned long addr);
+bool is_module_percpu_address(unsigned long addr);
+bool is_module_text_address(unsigned long addr);
+
+static inline int within_module_core(unsigned long addr, struct module *mod)
+{
+	return (unsigned long)mod->module_core <= addr &&
+	       addr < (unsigned long)mod->module_core + mod->core_size;
+}
+
+static inline int within_module_init(unsigned long addr, struct module *mod)
+{
+	return (unsigned long)mod->module_init <= addr &&
+	       addr < (unsigned long)mod->module_init + mod->init_size;
+}
+
+/* Search for module by name: must hold module_mutex. */
+struct module *find_module(const char *name);
+
+struct symsearch {
+	const struct kernel_symbol *start, *stop;
+	const unsigned long *crcs;
+	enum {
+		NOT_GPL_ONLY,
+		GPL_ONLY,
+		WILL_BE_GPL_ONLY,
+	} licence;
+	bool unused;
+};
+
+/* Search for an exported symbol by name. */
+const struct kernel_symbol *find_symbol(const char *name,
+					struct module **owner,
+					const unsigned long **crc,
+					bool gplok,
+					bool warn);
+
+/* Walk the exported symbol table */
+bool each_symbol_section(bool (*fn)(const struct symsearch *arr,
+				    struct module *owner,
+				    void *data), void *data);
+
+/* Returns 0 and fills in value, defined and namebuf, or -ERANGE if
+   symnum out of range. */
+int module_get_kallsym(unsigned int symnum, unsigned long *value, char *type,
+			char *name, char *module_name, int *exported);
+
+/* Look for this name: can be of form module:name. */
+unsigned long module_kallsyms_lookup_name(const char *name);
+
+int module_kallsyms_on_each_symbol(int (*fn)(void *, const char *,
+					     struct module *, unsigned long),
+				   void *data);
+
+extern void __module_put_and_exit(struct module *mod, long code)
+	__attribute__((noreturn));
+#define module_put_and_exit(code) __module_put_and_exit(THIS_MODULE, code);
+
+#ifdef CONFIG_MODULE_UNLOAD
+unsigned long module_refcount(struct module *mod);
+void __symbol_put(const char *symbol);
+#define symbol_put(x) __symbol_put(MODULE_SYMBOL_PREFIX #x)
+void symbol_put_addr(void *addr);
+
+/* Sometimes we know we already have a refcount, and it's easier not
+   to handle the error case (which only happens with rmmod --wait). */
+extern void __module_get(struct module *module);
+
+/* This is the Right Way to get a module: if it fails, it's being removed,
+ * so pretend it's not there. */
+extern bool try_module_get(struct module *module);
+
+extern void module_put(struct module *module);
+
+#else /*!CONFIG_MODULE_UNLOAD*/
+static inline int try_module_get(struct module *module)
+{
+	return !module || module_is_live(module);
+}
+static inline void module_put(struct module *module)
+{
+}
+static inline void __module_get(struct module *module)
+{
+}
+#define symbol_put(x) do { } while(0)
+#define symbol_put_addr(p) do { } while(0)
+
+#endif /* CONFIG_MODULE_UNLOAD */
+int ref_module(struct module *a, struct module *b);
+
+/* This is a #define so the string doesn't get put in every .o file */
+#define module_name(mod)			\
+({						\
+	struct module *__mod = (mod);		\
+	__mod ? __mod->name : "kernel";		\
+})
+
+/* For kallsyms to ask for address resolution.  namebuf should be at
+ * least KSYM_NAME_LEN long: a pointer to namebuf is returned if
+ * found, otherwise NULL. */
+const char *module_address_lookup(unsigned long addr,
+			    unsigned long *symbolsize,
+			    unsigned long *offset,
+			    char **modname,
+			    char *namebuf);
+int lookup_module_symbol_name(unsigned long addr, char *symname);
+int lookup_module_symbol_attrs(unsigned long addr, unsigned long *size, unsigned long *offset, char *modname, char *name);
+
+/* For extable.c to search modules' exception tables. */
+const struct exception_table_entry *search_module_extables(unsigned long addr);
+
+int register_module_notifier(struct notifier_block * nb);
+int unregister_module_notifier(struct notifier_block * nb);
+
+extern void print_modules(void);
+
+#else /* !CONFIG_MODULES... */
+
+/* Given an address, look for it in the exception tables. */
+static inline const struct exception_table_entry *
+search_module_extables(unsigned long addr)
+{
+	return NULL;
+}
+
+static inline struct module *__module_address(unsigned long addr)
+{
+	return NULL;
+}
+
+static inline struct module *__module_text_address(unsigned long addr)
+{
+	return NULL;
+}
+
+static inline bool is_module_address(unsigned long addr)
+{
+	return false;
+}
+
+static inline bool is_module_percpu_address(unsigned long addr)
+{
+	return false;
+}
+
+static inline bool is_module_text_address(unsigned long addr)
+{
+	return false;
+}
+
+/* Get/put a kernel symbol (calls should be symmetric) */
+#define symbol_get(x) ({ extern typeof(x) x __attribute__((weak)); &(x); })
+#define symbol_put(x) do { } while(0)
+#define symbol_put_addr(x) do { } while(0)
+
+static inline void __module_get(struct module *module)
+{
+}
+
+static inline int try_module_get(struct module *module)
+{
+	return 1;
+}
+
+static inline void module_put(struct module *module)
+{
+}
+
+#define module_name(mod) "kernel"
+
+/* For kallsyms to ask for address resolution.  NULL means not found. */
+static inline const char *module_address_lookup(unsigned long addr,
+					  unsigned long *symbolsize,
+					  unsigned long *offset,
+					  char **modname,
+					  char *namebuf)
+{
+	return NULL;
+}
+
+static inline int lookup_module_symbol_name(unsigned long addr, char *symname)
+{
+	return -ERANGE;
+}
+
+static inline int lookup_module_symbol_attrs(unsigned long addr, unsigned long *size, unsigned long *offset, char *modname, char *name)
+{
+	return -ERANGE;
+}
+
+static inline int module_get_kallsym(unsigned int symnum, unsigned long *value,
+					char *type, char *name,
+					char *module_name, int *exported)
+{
+	return -ERANGE;
+}
+
+static inline unsigned long module_kallsyms_lookup_name(const char *name)
+{
+	return 0;
+}
+
+static inline int module_kallsyms_on_each_symbol(int (*fn)(void *, const char *,
+							   struct module *,
+							   unsigned long),
+						 void *data)
+{
+	return 0;
+}
+
+static inline int register_module_notifier(struct notifier_block * nb)
+{
+	/* no events will happen anyway, so this can always succeed */
+	return 0;
+}
+
+static inline int unregister_module_notifier(struct notifier_block * nb)
+{
+	return 0;
+}
+
+#define module_put_and_exit(code) do_exit(code)
+
+static inline void print_modules(void)
+{
+}
+#endif /* CONFIG_MODULES */
+
+#ifdef CONFIG_SYSFS
+extern struct kset *module_kset;
+extern struct kobj_type module_ktype;
+extern int module_sysfs_initialized;
+#endif /* CONFIG_SYSFS */
+
+#define symbol_request(x) try_then_request_module(symbol_get(x), "symbol:" #x)
+
+/* BELOW HERE ALL THESE ARE OBSOLETE AND WILL VANISH */
+
+#define __MODULE_STRING(x) __stringify(x)
+
+#ifdef CONFIG_DEBUG_SET_MODULE_RONX
+extern void set_all_modules_text_rw(void);
+extern void set_all_modules_text_ro(void);
+#else
+static inline void set_all_modules_text_rw(void) { }
+static inline void set_all_modules_text_ro(void) { }
+#endif
+
+#ifdef CONFIG_GENERIC_BUG
+void module_bug_finalize(const Elf_Ehdr *, const Elf_Shdr *,
+			 struct module *);
+void module_bug_cleanup(struct module *);
+
+#else	/* !CONFIG_GENERIC_BUG */
+
+static inline void module_bug_finalize(const Elf_Ehdr *hdr,
+					const Elf_Shdr *sechdrs,
+					struct module *mod)
+{
+}
+static inline void module_bug_cleanup(struct module *mod) {}
+#endif	/* CONFIG_GENERIC_BUG */
+
+#endif /* _LINUX_MODULE_H */
diff --git a/include/linux/moduleloader.h b/include/linux/moduleloader.h
new file mode 100644
index 00000000..b2be02eb
--- /dev/null
+++ b/include/linux/moduleloader.h
@@ -0,0 +1,55 @@
+#ifndef _LINUX_MODULELOADER_H
+#define _LINUX_MODULELOADER_H
+/* The stuff needed for archs to support modules. */
+
+#include <linux/module.h>
+#include <linux/elf.h>
+
+/* These may be implemented by architectures that need to hook into the
+ * module loader code.  Architectures that don't need to do anything special
+ * can just rely on the 'weak' default hooks defined in kernel/module.c.
+ * Note, however, that at least one of apply_relocate or apply_relocate_add
+ * must be implemented by each architecture.
+ */
+
+/* Adjust arch-specific sections.  Return 0 on success.  */
+int module_frob_arch_sections(Elf_Ehdr *hdr,
+			      Elf_Shdr *sechdrs,
+			      char *secstrings,
+			      struct module *mod);
+
+/* Additional bytes needed by arch in front of individual sections */
+unsigned int arch_mod_section_prepend(struct module *mod, unsigned int section);
+
+/* Allocator used for allocating struct module, core sections and init
+   sections.  Returns NULL on failure. */
+void *module_alloc(unsigned long size);
+
+/* Free memory returned from module_alloc. */
+void module_free(struct module *mod, void *module_region);
+
+/* Apply the given relocation to the (simplified) ELF.  Return -error
+   or 0. */
+int apply_relocate(Elf_Shdr *sechdrs,
+		   const char *strtab,
+		   unsigned int symindex,
+		   unsigned int relsec,
+		   struct module *mod);
+
+/* Apply the given add relocation to the (simplified) ELF.  Return
+   -error or 0 */
+int apply_relocate_add(Elf_Shdr *sechdrs,
+		       const char *strtab,
+		       unsigned int symindex,
+		       unsigned int relsec,
+		       struct module *mod);
+
+/* Any final processing of module before access.  Return -error or 0. */
+int module_finalize(const Elf_Ehdr *hdr,
+		    const Elf_Shdr *sechdrs,
+		    struct module *mod);
+
+/* Any cleanup needed when module leaves. */
+void module_arch_cleanup(struct module *mod);
+
+#endif
diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
new file mode 100644
index 00000000..944bc186
--- /dev/null
+++ b/include/linux/moduleparam.h
@@ -0,0 +1,465 @@
+#ifndef _LINUX_MODULE_PARAMS_H
+#define _LINUX_MODULE_PARAMS_H
+/* (C) Copyright 2001, 2002 Rusty Russell IBM Corporation */
+#include <linux/init.h>
+#include <linux/stringify.h>
+#include <linux/kernel.h>
+
+/* You can override this manually, but generally this should match the
+   module name. */
+#ifdef MODULE
+#define MODULE_PARAM_PREFIX /* empty */
+#else
+#define MODULE_PARAM_PREFIX KBUILD_MODNAME "."
+#endif
+
+/* Chosen so that structs with an unsigned long line up. */
+#define MAX_PARAM_PREFIX_LEN (64 - sizeof(unsigned long))
+
+#define ___module_cat(a,b) __mod_ ## a ## b
+#define __module_cat(a,b) ___module_cat(a,b)
+#ifdef MODULE
+#define __MODULE_INFO(tag, name, info)					  \
+static const char __module_cat(name,__LINE__)[]				  \
+  __used __attribute__((section(".modinfo"), unused, aligned(1)))	  \
+  = __stringify(tag) "=" info
+#else  /* !MODULE */
+/* This struct is here for syntactic coherency, it is not used */
+#define __MODULE_INFO(tag, name, info)					  \
+  struct __module_cat(name,__LINE__) {}
+#endif
+#define __MODULE_PARM_TYPE(name, _type)					  \
+  __MODULE_INFO(parmtype, name##type, #name ":" _type)
+
+/* One for each parameter, describing how to use it.  Some files do
+   multiple of these per line, so can't just use MODULE_INFO. */
+#define MODULE_PARM_DESC(_parm, desc) \
+	__MODULE_INFO(parm, _parm, #_parm ":" desc)
+
+struct kernel_param;
+
+struct kernel_param_ops {
+	/* Returns 0, or -errno.  arg is in kp->arg. */
+	int (*set)(const char *val, const struct kernel_param *kp);
+	/* Returns length written or -errno.  Buffer is 4k (ie. be short!) */
+	int (*get)(char *buffer, const struct kernel_param *kp);
+	/* Optional function to free kp->arg when module unloaded. */
+	void (*free)(void *arg);
+};
+
+struct kernel_param {
+	const char *name;
+	const struct kernel_param_ops *ops;
+	u16 perm;
+	s16 level;
+	union {
+		void *arg;
+		const struct kparam_string *str;
+		const struct kparam_array *arr;
+	};
+};
+
+/* Special one for strings we want to copy into */
+struct kparam_string {
+	unsigned int maxlen;
+	char *string;
+};
+
+/* Special one for arrays */
+struct kparam_array
+{
+	unsigned int max;
+	unsigned int elemsize;
+	unsigned int *num;
+	const struct kernel_param_ops *ops;
+	void *elem;
+};
+
+/**
+ * module_param - typesafe helper for a module/cmdline parameter
+ * @value: the variable to alter, and exposed parameter name.
+ * @type: the type of the parameter
+ * @perm: visibility in sysfs.
+ *
+ * @value becomes the module parameter, or (prefixed by KBUILD_MODNAME and a
+ * ".") the kernel commandline parameter.  Note that - is changed to _, so
+ * the user can use "foo-bar=1" even for variable "foo_bar".
+ *
+ * @perm is 0 if the the variable is not to appear in sysfs, or 0444
+ * for world-readable, 0644 for root-writable, etc.  Note that if it
+ * is writable, you may need to use kparam_block_sysfs_write() around
+ * accesses (esp. charp, which can be kfreed when it changes).
+ *
+ * The @type is simply pasted to refer to a param_ops_##type and a
+ * param_check_##type: for convenience many standard types are provided but
+ * you can create your own by defining those variables.
+ *
+ * Standard types are:
+ *	byte, short, ushort, int, uint, long, ulong
+ *	charp: a character pointer
+ *	bool: a bool, values 0/1, y/n, Y/N.
+ *	invbool: the above, only sense-reversed (N = true).
+ */
+#define module_param(name, type, perm)				\
+	module_param_named(name, name, type, perm)
+
+/**
+ * module_param_named - typesafe helper for a renamed module/cmdline parameter
+ * @name: a valid C identifier which is the parameter name.
+ * @value: the actual lvalue to alter.
+ * @type: the type of the parameter
+ * @perm: visibility in sysfs.
+ *
+ * Usually it's a good idea to have variable names and user-exposed names the
+ * same, but that's harder if the variable must be non-static or is inside a
+ * structure.  This allows exposure under a different name.
+ */
+#define module_param_named(name, value, type, perm)			   \
+	param_check_##type(name, &(value));				   \
+	module_param_cb(name, &param_ops_##type, &value, perm);		   \
+	__MODULE_PARM_TYPE(name, #type)
+
+/**
+ * module_param_cb - general callback for a module/cmdline parameter
+ * @name: a valid C identifier which is the parameter name.
+ * @ops: the set & get operations for this parameter.
+ * @perm: visibility in sysfs.
+ *
+ * The ops can have NULL set or get functions.
+ */
+#define module_param_cb(name, ops, arg, perm)				      \
+	__module_param_call(MODULE_PARAM_PREFIX, name, ops, arg, perm, -1)
+
+/**
+ * <level>_param_cb - general callback for a module/cmdline parameter
+ *                    to be evaluated before certain initcall level
+ * @name: a valid C identifier which is the parameter name.
+ * @ops: the set & get operations for this parameter.
+ * @perm: visibility in sysfs.
+ *
+ * The ops can have NULL set or get functions.
+ */
+#define __level_param_cb(name, ops, arg, perm, level)			\
+	__module_param_call(MODULE_PARAM_PREFIX, name, ops, arg, perm, level)
+
+#define core_param_cb(name, ops, arg, perm)		\
+	__level_param_cb(name, ops, arg, perm, 1)
+
+#define postcore_param_cb(name, ops, arg, perm)		\
+	__level_param_cb(name, ops, arg, perm, 2)
+
+#define arch_param_cb(name, ops, arg, perm)		\
+	__level_param_cb(name, ops, arg, perm, 3)
+
+#define subsys_param_cb(name, ops, arg, perm)		\
+	__level_param_cb(name, ops, arg, perm, 4)
+
+#define fs_param_cb(name, ops, arg, perm)		\
+	__level_param_cb(name, ops, arg, perm, 5)
+
+#define device_param_cb(name, ops, arg, perm)		\
+	__level_param_cb(name, ops, arg, perm, 6)
+
+#define late_param_cb(name, ops, arg, perm)		\
+	__level_param_cb(name, ops, arg, perm, 7)
+
+/* On alpha, ia64 and ppc64 relocations to global data cannot go into
+   read-only sections (which is part of respective UNIX ABI on these
+   platforms). So 'const' makes no sense and even causes compile failures
+   with some compilers. */
+#if defined(CONFIG_ALPHA) || defined(CONFIG_IA64) || defined(CONFIG_PPC64)
+#define __moduleparam_const
+#else
+#define __moduleparam_const const
+#endif
+
+/* This is the fundamental function for registering boot/module
+   parameters. */
+#define __module_param_call(prefix, name, ops, arg, perm, level)	\
+	/* Default value instead of permissions? */			\
+	static int __param_perm_check_##name __attribute__((unused)) =	\
+	BUILD_BUG_ON_ZERO((perm) < 0 || (perm) > 0777 || ((perm) & 2))	\
+	+ BUILD_BUG_ON_ZERO(sizeof(""prefix) > MAX_PARAM_PREFIX_LEN);	\
+	static const char __param_str_##name[] = prefix #name;		\
+	static struct kernel_param __moduleparam_const __param_##name	\
+	__used								\
+    __attribute__ ((unused,__section__ ("__param"),aligned(sizeof(void *)))) \
+	= { __param_str_##name, ops, perm, level, { arg } }
+
+/* Obsolete - use module_param_cb() */
+#define module_param_call(name, set, get, arg, perm)			\
+	static struct kernel_param_ops __param_ops_##name =		\
+		 { (void *)set, (void *)get };				\
+	__module_param_call(MODULE_PARAM_PREFIX,			\
+			    name, &__param_ops_##name, arg,		\
+			    (perm) + sizeof(__check_old_set_param(set))*0, -1)
+
+/* We don't get oldget: it's often a new-style param_get_uint, etc. */
+static inline int
+__check_old_set_param(int (*oldset)(const char *, struct kernel_param *))
+{
+	return 0;
+}
+
+/**
+ * kparam_block_sysfs_write - make sure a parameter isn't written via sysfs.
+ * @name: the name of the parameter
+ *
+ * There's no point blocking write on a paramter that isn't writable via sysfs!
+ */
+#define kparam_block_sysfs_write(name)			\
+	do {						\
+		BUG_ON(!(__param_##name.perm & 0222));	\
+		__kernel_param_lock();			\
+	} while (0)
+
+/**
+ * kparam_unblock_sysfs_write - allows sysfs to write to a parameter again.
+ * @name: the name of the parameter
+ */
+#define kparam_unblock_sysfs_write(name)		\
+	do {						\
+		BUG_ON(!(__param_##name.perm & 0222));	\
+		__kernel_param_unlock();		\
+	} while (0)
+
+/**
+ * kparam_block_sysfs_read - make sure a parameter isn't read via sysfs.
+ * @name: the name of the parameter
+ *
+ * This also blocks sysfs writes.
+ */
+#define kparam_block_sysfs_read(name)			\
+	do {						\
+		BUG_ON(!(__param_##name.perm & 0444));	\
+		__kernel_param_lock();			\
+	} while (0)
+
+/**
+ * kparam_unblock_sysfs_read - allows sysfs to read a parameter again.
+ * @name: the name of the parameter
+ */
+#define kparam_unblock_sysfs_read(name)			\
+	do {						\
+		BUG_ON(!(__param_##name.perm & 0444));	\
+		__kernel_param_unlock();		\
+	} while (0)
+
+#ifdef CONFIG_SYSFS
+extern void __kernel_param_lock(void);
+extern void __kernel_param_unlock(void);
+#else
+static inline void __kernel_param_lock(void)
+{
+}
+static inline void __kernel_param_unlock(void)
+{
+}
+#endif
+
+#ifndef MODULE
+/**
+ * core_param - define a historical core kernel parameter.
+ * @name: the name of the cmdline and sysfs parameter (often the same as var)
+ * @var: the variable
+ * @type: the type of the parameter
+ * @perm: visibility in sysfs
+ *
+ * core_param is just like module_param(), but cannot be modular and
+ * doesn't add a prefix (such as "printk.").  This is for compatibility
+ * with __setup(), and it makes sense as truly core parameters aren't
+ * tied to the particular file they're in.
+ */
+#define core_param(name, var, type, perm)				\
+	param_check_##type(name, &(var));				\
+	__module_param_call("", name, &param_ops_##type, &var, perm, -1)
+#endif /* !MODULE */
+
+/**
+ * module_param_string - a char array parameter
+ * @name: the name of the parameter
+ * @string: the string variable
+ * @len: the maximum length of the string, incl. terminator
+ * @perm: visibility in sysfs.
+ *
+ * This actually copies the string when it's set (unlike type charp).
+ * @len is usually just sizeof(string).
+ */
+#define module_param_string(name, string, len, perm)			\
+	static const struct kparam_string __param_string_##name		\
+		= { len, string };					\
+	__module_param_call(MODULE_PARAM_PREFIX, name,			\
+			    &param_ops_string,				\
+			    .str = &__param_string_##name, perm, -1);	\
+	__MODULE_PARM_TYPE(name, "string")
+
+/**
+ * parameq - checks if two parameter names match
+ * @name1: parameter name 1
+ * @name2: parameter name 2
+ *
+ * Returns true if the two parameter names are equal.
+ * Dashes (-) are considered equal to underscores (_).
+ */
+extern bool parameq(const char *name1, const char *name2);
+
+/**
+ * parameqn - checks if two parameter names match
+ * @name1: parameter name 1
+ * @name2: parameter name 2
+ * @n: the length to compare
+ *
+ * Similar to parameq(), except it compares @n characters.
+ */
+extern bool parameqn(const char *name1, const char *name2, size_t n);
+
+/* Called on module insert or kernel boot */
+extern int parse_args(const char *name,
+		      char *args,
+		      const struct kernel_param *params,
+		      unsigned num,
+		      s16 level_min,
+		      s16 level_max,
+		      int (*unknown)(char *param, char *val));
+
+/* Called by module remove. */
+#ifdef CONFIG_SYSFS
+extern void destroy_params(const struct kernel_param *params, unsigned num);
+#else
+static inline void destroy_params(const struct kernel_param *params,
+				  unsigned num)
+{
+}
+#endif /* !CONFIG_SYSFS */
+
+/* All the helper functions */
+/* The macros to do compile-time type checking stolen from Jakub
+   Jelinek, who IIRC came up with this idea for the 2.4 module init code. */
+#define __param_check(name, p, type) \
+	static inline type *__check_##name(void) { return(p); }
+
+extern struct kernel_param_ops param_ops_byte;
+extern int param_set_byte(const char *val, const struct kernel_param *kp);
+extern int param_get_byte(char *buffer, const struct kernel_param *kp);
+#define param_check_byte(name, p) __param_check(name, p, unsigned char)
+
+extern struct kernel_param_ops param_ops_short;
+extern int param_set_short(const char *val, const struct kernel_param *kp);
+extern int param_get_short(char *buffer, const struct kernel_param *kp);
+#define param_check_short(name, p) __param_check(name, p, short)
+
+extern struct kernel_param_ops param_ops_ushort;
+extern int param_set_ushort(const char *val, const struct kernel_param *kp);
+extern int param_get_ushort(char *buffer, const struct kernel_param *kp);
+#define param_check_ushort(name, p) __param_check(name, p, unsigned short)
+
+extern struct kernel_param_ops param_ops_int;
+extern int param_set_int(const char *val, const struct kernel_param *kp);
+extern int param_get_int(char *buffer, const struct kernel_param *kp);
+#define param_check_int(name, p) __param_check(name, p, int)
+
+extern struct kernel_param_ops param_ops_uint;
+extern int param_set_uint(const char *val, const struct kernel_param *kp);
+extern int param_get_uint(char *buffer, const struct kernel_param *kp);
+#define param_check_uint(name, p) __param_check(name, p, unsigned int)
+
+extern struct kernel_param_ops param_ops_long;
+extern int param_set_long(const char *val, const struct kernel_param *kp);
+extern int param_get_long(char *buffer, const struct kernel_param *kp);
+#define param_check_long(name, p) __param_check(name, p, long)
+
+extern struct kernel_param_ops param_ops_ulong;
+extern int param_set_ulong(const char *val, const struct kernel_param *kp);
+extern int param_get_ulong(char *buffer, const struct kernel_param *kp);
+#define param_check_ulong(name, p) __param_check(name, p, unsigned long)
+
+extern struct kernel_param_ops param_ops_charp;
+extern int param_set_charp(const char *val, const struct kernel_param *kp);
+extern int param_get_charp(char *buffer, const struct kernel_param *kp);
+#define param_check_charp(name, p) __param_check(name, p, char *)
+
+/* We used to allow int as well as bool.  We're taking that away! */
+extern struct kernel_param_ops param_ops_bool;
+extern int param_set_bool(const char *val, const struct kernel_param *kp);
+extern int param_get_bool(char *buffer, const struct kernel_param *kp);
+#define param_check_bool(name, p) __param_check(name, p, bool)
+
+extern struct kernel_param_ops param_ops_invbool;
+extern int param_set_invbool(const char *val, const struct kernel_param *kp);
+extern int param_get_invbool(char *buffer, const struct kernel_param *kp);
+#define param_check_invbool(name, p) __param_check(name, p, bool)
+
+/* An int, which can only be set like a bool (though it shows as an int). */
+extern struct kernel_param_ops param_ops_bint;
+extern int param_set_bint(const char *val, const struct kernel_param *kp);
+#define param_get_bint param_get_int
+#define param_check_bint param_check_int
+
+/**
+ * module_param_array - a parameter which is an array of some type
+ * @name: the name of the array variable
+ * @type: the type, as per module_param()
+ * @nump: optional pointer filled in with the number written
+ * @perm: visibility in sysfs
+ *
+ * Input and output are as comma-separated values.  Commas inside values
+ * don't work properly (eg. an array of charp).
+ *
+ * ARRAY_SIZE(@name) is used to determine the number of elements in the
+ * array, so the definition must be visible.
+ */
+#define module_param_array(name, type, nump, perm)		\
+	module_param_array_named(name, name, type, nump, perm)
+
+/**
+ * module_param_array_named - renamed parameter which is an array of some type
+ * @name: a valid C identifier which is the parameter name
+ * @array: the name of the array variable
+ * @type: the type, as per module_param()
+ * @nump: optional pointer filled in with the number written
+ * @perm: visibility in sysfs
+ *
+ * This exposes a different name than the actual variable name.  See
+ * module_param_named() for why this might be necessary.
+ */
+#define module_param_array_named(name, array, type, nump, perm)		\
+	param_check_##type(name, &(array)[0]);				\
+	static const struct kparam_array __param_arr_##name		\
+	= { .max = ARRAY_SIZE(array), .num = nump,                      \
+	    .ops = &param_ops_##type,					\
+	    .elemsize = sizeof(array[0]), .elem = array };		\
+	__module_param_call(MODULE_PARAM_PREFIX, name,			\
+			    &param_array_ops,				\
+			    .arr = &__param_arr_##name,			\
+			    perm, -1);					\
+	__MODULE_PARM_TYPE(name, "array of " #type)
+
+extern struct kernel_param_ops param_array_ops;
+
+extern struct kernel_param_ops param_ops_string;
+extern int param_set_copystring(const char *val, const struct kernel_param *);
+extern int param_get_string(char *buffer, const struct kernel_param *kp);
+
+/* for exporting parameters in /sys/parameters */
+
+struct module;
+
+#if defined(CONFIG_SYSFS) && defined(CONFIG_MODULES)
+extern int module_param_sysfs_setup(struct module *mod,
+				    const struct kernel_param *kparam,
+				    unsigned int num_params);
+
+extern void module_param_sysfs_remove(struct module *mod);
+#else
+static inline int module_param_sysfs_setup(struct module *mod,
+			     const struct kernel_param *kparam,
+			     unsigned int num_params)
+{
+	return 0;
+}
+
+static inline void module_param_sysfs_remove(struct module *mod)
+{ }
+#endif
+
+#endif /* _LINUX_MODULE_PARAMS_H */
diff --git a/include/linux/mount.h b/include/linux/mount.h
new file mode 100644
index 00000000..d7029f4a
--- /dev/null
+++ b/include/linux/mount.h
@@ -0,0 +1,79 @@
+/*
+ *
+ * Definitions for mount interface. This describes the in the kernel build 
+ * linkedlist with mounted filesystems.
+ *
+ * Author:  Marco van Wieringen <mvw@planets.elm.net>
+ *
+ */
+#ifndef _LINUX_MOUNT_H
+#define _LINUX_MOUNT_H
+
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/nodemask.h>
+#include <linux/spinlock.h>
+#include <linux/seqlock.h>
+#include <linux/atomic.h>
+
+struct super_block;
+struct vfsmount;
+struct dentry;
+struct mnt_namespace;
+
+#define MNT_NOSUID	0x01
+#define MNT_NODEV	0x02
+#define MNT_NOEXEC	0x04
+#define MNT_NOATIME	0x08
+#define MNT_NODIRATIME	0x10
+#define MNT_RELATIME	0x20
+#define MNT_READONLY	0x40	/* does the user want this to be r/o? */
+
+#define MNT_SHRINKABLE	0x100
+#define MNT_WRITE_HOLD	0x200
+
+#define MNT_SHARED	0x1000	/* if the vfsmount is a shared mount */
+#define MNT_UNBINDABLE	0x2000	/* if the vfsmount is a unbindable mount */
+/*
+ * MNT_SHARED_MASK is the set of flags that should be cleared when a
+ * mount becomes shared.  Currently, this is only the flag that says a
+ * mount cannot be bind mounted, since this is how we create a mount
+ * that shares events with another mount.  If you add a new MNT_*
+ * flag, consider how it interacts with shared mounts.
+ */
+#define MNT_SHARED_MASK	(MNT_UNBINDABLE)
+#define MNT_PROPAGATION_MASK	(MNT_SHARED | MNT_UNBINDABLE)
+
+
+#define MNT_INTERNAL	0x4000
+
+struct vfsmount {
+	struct dentry *mnt_root;	/* root of the mounted tree */
+	struct super_block *mnt_sb;	/* pointer to superblock */
+	int mnt_flags;
+};
+
+struct file; /* forward dec */
+
+extern int mnt_want_write(struct vfsmount *mnt);
+extern int mnt_want_write_file(struct file *file);
+extern int mnt_clone_write(struct vfsmount *mnt);
+extern void mnt_drop_write(struct vfsmount *mnt);
+extern void mnt_drop_write_file(struct file *file);
+extern void mntput(struct vfsmount *mnt);
+extern struct vfsmount *mntget(struct vfsmount *mnt);
+extern void mnt_pin(struct vfsmount *mnt);
+extern void mnt_unpin(struct vfsmount *mnt);
+extern int __mnt_is_readonly(struct vfsmount *mnt);
+
+struct file_system_type;
+extern struct vfsmount *vfs_kern_mount(struct file_system_type *type,
+				      int flags, const char *name,
+				      void *data);
+
+extern void mnt_set_expiry(struct vfsmount *mnt, struct list_head *expiry_list);
+extern void mark_mounts_for_expiry(struct list_head *mounts);
+
+extern dev_t name_to_dev_t(char *name);
+
+#endif /* _LINUX_MOUNT_H */
diff --git a/include/linux/mpage.h b/include/linux/mpage.h
new file mode 100644
index 00000000..068a0c99
--- /dev/null
+++ b/include/linux/mpage.h
@@ -0,0 +1,24 @@
+/*
+ * include/linux/mpage.h
+ *
+ * Contains declarations related to preparing and submitting BIOS which contain
+ * multiple pagecache pages.
+ */
+
+/*
+ * (And no, it doesn't do the #ifdef __MPAGE_H thing, and it doesn't do
+ * nested includes.  Get it right in the .c file).
+ */
+#ifdef CONFIG_BLOCK
+
+struct writeback_control;
+
+int mpage_readpages(struct address_space *mapping, struct list_head *pages,
+				unsigned nr_pages, get_block_t get_block);
+int mpage_readpage(struct page *page, get_block_t get_block);
+int mpage_writepages(struct address_space *mapping,
+		struct writeback_control *wbc, get_block_t get_block);
+int mpage_writepage(struct page *page, get_block_t *get_block,
+		struct writeback_control *wbc);
+
+#endif
diff --git a/include/linux/mpi.h b/include/linux/mpi.h
new file mode 100644
index 00000000..d02cca6c
--- /dev/null
+++ b/include/linux/mpi.h
@@ -0,0 +1,144 @@
+/* mpi.h  -  Multi Precision Integers
+ *	Copyright (C) 1994, 1996, 1998, 1999,
+ *                    2000, 2001 Free Software Foundation, Inc.
+ *
+ * This file is part of GNUPG.
+ *
+ * GNUPG is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * GNUPG is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ *
+ * Note: This code is heavily based on the GNU MP Library.
+ *	 Actually it's the same code with only minor changes in the
+ *	 way the data is stored; this is to support the abstraction
+ *	 of an optional secure memory allocation which may be used
+ *	 to avoid revealing of sensitive data due to paging etc.
+ *	 The GNU MP Library itself is published under the LGPL;
+ *	 however I decided to publish this code under the plain GPL.
+ */
+
+#ifndef G10_MPI_H
+#define G10_MPI_H
+
+#include <linux/types.h>
+
+/* DSI defines */
+
+#define SHA1_DIGEST_LENGTH   20
+
+/*end of DSI defines */
+
+#define BYTES_PER_MPI_LIMB	(BITS_PER_LONG / 8)
+#define BITS_PER_MPI_LIMB	BITS_PER_LONG
+
+typedef unsigned long int mpi_limb_t;
+typedef signed long int mpi_limb_signed_t;
+
+struct gcry_mpi {
+	int alloced;		/* array size (# of allocated limbs) */
+	int nlimbs;		/* number of valid limbs */
+	int nbits;		/* the real number of valid bits (info only) */
+	int sign;		/* indicates a negative number */
+	unsigned flags;		/* bit 0: array must be allocated in secure memory space */
+	/* bit 1: not used */
+	/* bit 2: the limb is a pointer to some m_alloced data */
+	mpi_limb_t *d;		/* array with the limbs */
+};
+
+typedef struct gcry_mpi *MPI;
+
+#define mpi_get_nlimbs(a)     ((a)->nlimbs)
+#define mpi_is_neg(a)	      ((a)->sign)
+
+/*-- mpiutil.c --*/
+MPI mpi_alloc(unsigned nlimbs);
+MPI mpi_alloc_secure(unsigned nlimbs);
+MPI mpi_alloc_like(MPI a);
+void mpi_free(MPI a);
+int mpi_resize(MPI a, unsigned nlimbs);
+int mpi_copy(MPI *copy, const MPI a);
+void mpi_clear(MPI a);
+int mpi_set(MPI w, MPI u);
+int mpi_set_ui(MPI w, ulong u);
+MPI mpi_alloc_set_ui(unsigned long u);
+void mpi_m_check(MPI a);
+void mpi_swap(MPI a, MPI b);
+
+/*-- mpicoder.c --*/
+MPI do_encode_md(const void *sha_buffer, unsigned nbits);
+MPI mpi_read_from_buffer(const void *buffer, unsigned *ret_nread);
+int mpi_fromstr(MPI val, const char *str);
+u32 mpi_get_keyid(MPI a, u32 *keyid);
+void *mpi_get_buffer(MPI a, unsigned *nbytes, int *sign);
+void *mpi_get_secure_buffer(MPI a, unsigned *nbytes, int *sign);
+int mpi_set_buffer(MPI a, const void *buffer, unsigned nbytes, int sign);
+
+#define log_mpidump g10_log_mpidump
+
+/*-- mpi-add.c --*/
+int mpi_add_ui(MPI w, MPI u, ulong v);
+int mpi_add(MPI w, MPI u, MPI v);
+int mpi_addm(MPI w, MPI u, MPI v, MPI m);
+int mpi_sub_ui(MPI w, MPI u, ulong v);
+int mpi_sub(MPI w, MPI u, MPI v);
+int mpi_subm(MPI w, MPI u, MPI v, MPI m);
+
+/*-- mpi-mul.c --*/
+int mpi_mul_ui(MPI w, MPI u, ulong v);
+int mpi_mul_2exp(MPI w, MPI u, ulong cnt);
+int mpi_mul(MPI w, MPI u, MPI v);
+int mpi_mulm(MPI w, MPI u, MPI v, MPI m);
+
+/*-- mpi-div.c --*/
+ulong mpi_fdiv_r_ui(MPI rem, MPI dividend, ulong divisor);
+int mpi_fdiv_r(MPI rem, MPI dividend, MPI divisor);
+int mpi_fdiv_q(MPI quot, MPI dividend, MPI divisor);
+int mpi_fdiv_qr(MPI quot, MPI rem, MPI dividend, MPI divisor);
+int mpi_tdiv_r(MPI rem, MPI num, MPI den);
+int mpi_tdiv_qr(MPI quot, MPI rem, MPI num, MPI den);
+int mpi_tdiv_q_2exp(MPI w, MPI u, unsigned count);
+int mpi_divisible_ui(const MPI dividend, ulong divisor);
+
+/*-- mpi-gcd.c --*/
+int mpi_gcd(MPI g, const MPI a, const MPI b);
+
+/*-- mpi-pow.c --*/
+int mpi_pow(MPI w, MPI u, MPI v);
+int mpi_powm(MPI res, MPI base, MPI exp, MPI mod);
+
+/*-- mpi-mpow.c --*/
+int mpi_mulpowm(MPI res, MPI *basearray, MPI *exparray, MPI mod);
+
+/*-- mpi-cmp.c --*/
+int mpi_cmp_ui(MPI u, ulong v);
+int mpi_cmp(MPI u, MPI v);
+
+/*-- mpi-scan.c --*/
+int mpi_getbyte(MPI a, unsigned idx);
+void mpi_putbyte(MPI a, unsigned idx, int value);
+unsigned mpi_trailing_zeros(MPI a);
+
+/*-- mpi-bit.c --*/
+void mpi_normalize(MPI a);
+unsigned mpi_get_nbits(MPI a);
+int mpi_test_bit(MPI a, unsigned n);
+int mpi_set_bit(MPI a, unsigned n);
+int mpi_set_highbit(MPI a, unsigned n);
+void mpi_clear_highbit(MPI a, unsigned n);
+void mpi_clear_bit(MPI a, unsigned n);
+int mpi_rshift(MPI x, MPI a, unsigned n);
+
+/*-- mpi-inv.c --*/
+int mpi_invm(MPI x, MPI u, MPI v);
+
+#endif /*G10_MPI_H */
diff --git a/include/linux/mqueue.h b/include/linux/mqueue.h
new file mode 100644
index 00000000..8b5a7961
--- /dev/null
+++ b/include/linux/mqueue.h
@@ -0,0 +1,53 @@
+/* Copyright (C) 2003 Krzysztof Benedyczak & Michal Wronski
+
+   This program is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   It is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with this software; if not, write to the Free
+   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+   02111-1307 USA.  */
+
+#ifndef _LINUX_MQUEUE_H
+#define _LINUX_MQUEUE_H
+
+#define MQ_PRIO_MAX 	32768
+/* per-uid limit of kernel memory used by mqueue, in bytes */
+#define MQ_BYTES_MAX	819200
+
+struct mq_attr {
+	long	mq_flags;	/* message queue flags			*/
+	long	mq_maxmsg;	/* maximum number of messages		*/
+	long	mq_msgsize;	/* maximum message size			*/
+	long	mq_curmsgs;	/* number of messages currently queued	*/
+	long	__reserved[4];	/* ignored for input, zeroed for output */
+};
+
+/*
+ * SIGEV_THREAD implementation:
+ * SIGEV_THREAD must be implemented in user space. If SIGEV_THREAD is passed
+ * to mq_notify, then
+ * - sigev_signo must be the file descriptor of an AF_NETLINK socket. It's not
+ *   necessary that the socket is bound.
+ * - sigev_value.sival_ptr must point to a cookie that is NOTIFY_COOKIE_LEN
+ *   bytes long.
+ * If the notification is triggered, then the cookie is sent to the netlink
+ * socket. The last byte of the cookie is replaced with the NOTIFY_?? codes:
+ * NOTIFY_WOKENUP if the notification got triggered, NOTIFY_REMOVED if it was
+ * removed, either due to a close() on the message queue fd or due to a
+ * mq_notify() that removed the notification.
+ */
+#define NOTIFY_NONE	0
+#define NOTIFY_WOKENUP	1
+#define NOTIFY_REMOVED	2
+
+#define NOTIFY_COOKIE_LEN	32
+
+#endif
diff --git a/include/linux/mroute.h b/include/linux/mroute.h
new file mode 100644
index 00000000..46caaf44
--- /dev/null
+++ b/include/linux/mroute.h
@@ -0,0 +1,251 @@
+#ifndef __LINUX_MROUTE_H
+#define __LINUX_MROUTE_H
+
+#include <linux/sockios.h>
+#include <linux/types.h>
+#ifdef __KERNEL__
+#include <linux/in.h>
+#endif
+
+/*
+ *	Based on the MROUTING 3.5 defines primarily to keep
+ *	source compatibility with BSD.
+ *
+ *	See the mrouted code for the original history.
+ *
+ *      Protocol Independent Multicast (PIM) data structures included
+ *      Carlos Picoto (cap@di.fc.ul.pt)
+ *
+ */
+
+#define MRT_BASE	200
+#define MRT_INIT	(MRT_BASE)	/* Activate the kernel mroute code 	*/
+#define MRT_DONE	(MRT_BASE+1)	/* Shutdown the kernel mroute		*/
+#define MRT_ADD_VIF	(MRT_BASE+2)	/* Add a virtual interface		*/
+#define MRT_DEL_VIF	(MRT_BASE+3)	/* Delete a virtual interface		*/
+#define MRT_ADD_MFC	(MRT_BASE+4)	/* Add a multicast forwarding entry	*/
+#define MRT_DEL_MFC	(MRT_BASE+5)	/* Delete a multicast forwarding entry	*/
+#define MRT_VERSION	(MRT_BASE+6)	/* Get the kernel multicast version	*/
+#define MRT_ASSERT	(MRT_BASE+7)	/* Activate PIM assert mode		*/
+#define MRT_PIM		(MRT_BASE+8)	/* enable PIM code			*/
+#define MRT_TABLE	(MRT_BASE+9)	/* Specify mroute table ID		*/
+
+#define SIOCGETVIFCNT	SIOCPROTOPRIVATE	/* IP protocol privates */
+#define SIOCGETSGCNT	(SIOCPROTOPRIVATE+1)
+#define SIOCGETRPF	(SIOCPROTOPRIVATE+2)
+
+#define MAXVIFS		32	
+typedef unsigned long vifbitmap_t;	/* User mode code depends on this lot */
+typedef unsigned short vifi_t;
+#define ALL_VIFS	((vifi_t)(-1))
+
+/*
+ *	Same idea as select
+ */
+ 
+#define VIFM_SET(n,m)	((m)|=(1<<(n)))
+#define VIFM_CLR(n,m)	((m)&=~(1<<(n)))
+#define VIFM_ISSET(n,m)	((m)&(1<<(n)))
+#define VIFM_CLRALL(m)	((m)=0)
+#define VIFM_COPY(mfrom,mto)	((mto)=(mfrom))
+#define VIFM_SAME(m1,m2)	((m1)==(m2))
+
+/*
+ *	Passed by mrouted for an MRT_ADD_VIF - again we use the
+ *	mrouted 3.6 structures for compatibility
+ */
+ 
+struct vifctl {
+	vifi_t	vifc_vifi;		/* Index of VIF */
+	unsigned char vifc_flags;	/* VIFF_ flags */
+	unsigned char vifc_threshold;	/* ttl limit */
+	unsigned int vifc_rate_limit;	/* Rate limiter values (NI) */
+	union {
+		struct in_addr vifc_lcl_addr;     /* Local interface address */
+		int            vifc_lcl_ifindex;  /* Local interface index   */
+	};
+	struct in_addr vifc_rmt_addr;	/* IPIP tunnel addr */
+};
+
+#define VIFF_TUNNEL		0x1	/* IPIP tunnel */
+#define VIFF_SRCRT		0x2	/* NI */
+#define VIFF_REGISTER		0x4	/* register vif	*/
+#define VIFF_USE_IFINDEX	0x8	/* use vifc_lcl_ifindex instead of
+					   vifc_lcl_addr to find an interface */
+
+/*
+ *	Cache manipulation structures for mrouted and PIMd
+ */
+ 
+struct mfcctl {
+	struct in_addr mfcc_origin;		/* Origin of mcast	*/
+	struct in_addr mfcc_mcastgrp;		/* Group in question	*/
+	vifi_t	mfcc_parent;			/* Where it arrived	*/
+	unsigned char mfcc_ttls[MAXVIFS];	/* Where it is going	*/
+	unsigned int mfcc_pkt_cnt;		/* pkt count for src-grp */
+	unsigned int mfcc_byte_cnt;
+	unsigned int mfcc_wrong_if;
+	int	     mfcc_expire;
+};
+
+/* 
+ *	Group count retrieval for mrouted
+ */
+ 
+struct sioc_sg_req {
+	struct in_addr src;
+	struct in_addr grp;
+	unsigned long pktcnt;
+	unsigned long bytecnt;
+	unsigned long wrong_if;
+};
+
+/*
+ *	To get vif packet counts
+ */
+
+struct sioc_vif_req {
+	vifi_t	vifi;		/* Which iface */
+	unsigned long icount;	/* In packets */
+	unsigned long ocount;	/* Out packets */
+	unsigned long ibytes;	/* In bytes */
+	unsigned long obytes;	/* Out bytes */
+};
+
+/*
+ *	This is the format the mroute daemon expects to see IGMP control
+ *	data. Magically happens to be like an IP packet as per the original
+ */
+ 
+struct igmpmsg {
+	__u32 unused1,unused2;
+	unsigned char im_msgtype;		/* What is this */
+	unsigned char im_mbz;			/* Must be zero */
+	unsigned char im_vif;			/* Interface (this ought to be a vifi_t!) */
+	unsigned char unused3;
+	struct in_addr im_src,im_dst;
+};
+
+/*
+ *	That's all usermode folks
+ */
+
+#ifdef __KERNEL__
+#include <linux/pim.h>
+#include <net/sock.h>
+
+#ifdef CONFIG_IP_MROUTE
+static inline int ip_mroute_opt(int opt)
+{
+	return (opt >= MRT_BASE) && (opt <= MRT_BASE + 10);
+}
+#else
+static inline int ip_mroute_opt(int opt)
+{
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_IP_MROUTE
+extern int ip_mroute_setsockopt(struct sock *, int, char __user *, unsigned int);
+extern int ip_mroute_getsockopt(struct sock *, int, char __user *, int __user *);
+extern int ipmr_ioctl(struct sock *sk, int cmd, void __user *arg);
+extern int ipmr_compat_ioctl(struct sock *sk, unsigned int cmd, void __user *arg);
+extern int ip_mr_init(void);
+#else
+static inline
+int ip_mroute_setsockopt(struct sock *sock,
+			 int optname, char __user *optval, unsigned int optlen)
+{
+	return -ENOPROTOOPT;
+}
+
+static inline
+int ip_mroute_getsockopt(struct sock *sock,
+			 int optname, char __user *optval, int __user *optlen)
+{
+	return -ENOPROTOOPT;
+}
+
+static inline
+int ipmr_ioctl(struct sock *sk, int cmd, void __user *arg)
+{
+	return -ENOIOCTLCMD;
+}
+
+static inline int ip_mr_init(void)
+{
+	return 0;
+}
+#endif
+
+struct vif_device {
+	struct net_device 	*dev;			/* Device we are using */
+	unsigned long	bytes_in,bytes_out;
+	unsigned long	pkt_in,pkt_out;		/* Statistics 			*/
+	unsigned long	rate_limit;		/* Traffic shaping (NI) 	*/
+	unsigned char	threshold;		/* TTL threshold 		*/
+	unsigned short	flags;			/* Control flags 		*/
+	__be32		local,remote;		/* Addresses(remote for tunnels)*/
+	int		link;			/* Physical interface index	*/
+};
+
+#define VIFF_STATIC 0x8000
+
+struct mfc_cache {
+	struct list_head list;
+	__be32 mfc_mcastgrp;			/* Group the entry belongs to 	*/
+	__be32 mfc_origin;			/* Source of packet 		*/
+	vifi_t mfc_parent;			/* Source interface		*/
+	int mfc_flags;				/* Flags on line		*/
+
+	union {
+		struct {
+			unsigned long expires;
+			struct sk_buff_head unresolved;	/* Unresolved buffers		*/
+		} unres;
+		struct {
+			unsigned long last_assert;
+			int minvif;
+			int maxvif;
+			unsigned long bytes;
+			unsigned long pkt;
+			unsigned long wrong_if;
+			unsigned char ttls[MAXVIFS];	/* TTL thresholds		*/
+		} res;
+	} mfc_un;
+	struct rcu_head	rcu;
+};
+
+#define MFC_STATIC		1
+#define MFC_NOTIFY		2
+
+#define MFC_LINES		64
+
+#ifdef __BIG_ENDIAN
+#define MFC_HASH(a,b)	(((((__force u32)(__be32)a)>>24)^(((__force u32)(__be32)b)>>26))&(MFC_LINES-1))
+#else
+#define MFC_HASH(a,b)	((((__force u32)(__be32)a)^(((__force u32)(__be32)b)>>2))&(MFC_LINES-1))
+#endif		
+
+#endif
+
+
+#define MFC_ASSERT_THRESH (3*HZ)		/* Maximal freq. of asserts */
+
+/*
+ *	Pseudo messages used by mrouted
+ */
+
+#define IGMPMSG_NOCACHE		1		/* Kern cache fill request to mrouted */
+#define IGMPMSG_WRONGVIF	2		/* For PIM assert processing (unused) */
+#define IGMPMSG_WHOLEPKT	3		/* For PIM Register processing */
+
+#ifdef __KERNEL__
+struct rtmsg;
+extern int ipmr_get_route(struct net *net, struct sk_buff *skb,
+			  __be32 saddr, __be32 daddr,
+			  struct rtmsg *rtm, int nowait);
+#endif
+
+#endif
diff --git a/include/linux/mroute6.h b/include/linux/mroute6.h
new file mode 100644
index 00000000..6d8c7251
--- /dev/null
+++ b/include/linux/mroute6.h
@@ -0,0 +1,269 @@
+#ifndef __LINUX_MROUTE6_H
+#define __LINUX_MROUTE6_H
+
+#include <linux/types.h>
+#include <linux/sockios.h>
+
+/*
+ *	Based on the MROUTING 3.5 defines primarily to keep
+ *	source compatibility with BSD.
+ *
+ *	See the pim6sd code for the original history.
+ *
+ *      Protocol Independent Multicast (PIM) data structures included
+ *      Carlos Picoto (cap@di.fc.ul.pt)
+ *
+ */
+
+#define MRT6_BASE	200
+#define MRT6_INIT	(MRT6_BASE)	/* Activate the kernel mroute code 	*/
+#define MRT6_DONE	(MRT6_BASE+1)	/* Shutdown the kernel mroute		*/
+#define MRT6_ADD_MIF	(MRT6_BASE+2)	/* Add a virtual interface		*/
+#define MRT6_DEL_MIF	(MRT6_BASE+3)	/* Delete a virtual interface		*/
+#define MRT6_ADD_MFC	(MRT6_BASE+4)	/* Add a multicast forwarding entry	*/
+#define MRT6_DEL_MFC	(MRT6_BASE+5)	/* Delete a multicast forwarding entry	*/
+#define MRT6_VERSION	(MRT6_BASE+6)	/* Get the kernel multicast version	*/
+#define MRT6_ASSERT	(MRT6_BASE+7)	/* Activate PIM assert mode		*/
+#define MRT6_PIM	(MRT6_BASE+8)	/* enable PIM code			*/
+#define MRT6_TABLE	(MRT6_BASE+9)	/* Specify mroute table ID		*/
+
+#define SIOCGETMIFCNT_IN6	SIOCPROTOPRIVATE	/* IP protocol privates */
+#define SIOCGETSGCNT_IN6	(SIOCPROTOPRIVATE+1)
+#define SIOCGETRPF	(SIOCPROTOPRIVATE+2)
+
+#define MAXMIFS		32
+typedef unsigned long mifbitmap_t;	/* User mode code depends on this lot */
+typedef unsigned short mifi_t;
+#define ALL_MIFS	((mifi_t)(-1))
+
+#ifndef IF_SETSIZE
+#define IF_SETSIZE	256
+#endif
+
+typedef	__u32		if_mask;
+#define NIFBITS (sizeof(if_mask) * 8)        /* bits per mask */
+
+#if !defined(__KERNEL__)
+#if !defined(DIV_ROUND_UP)
+#define	DIV_ROUND_UP(x,y)	(((x) + ((y) - 1)) / (y))
+#endif
+#endif
+
+typedef struct if_set {
+	if_mask ifs_bits[DIV_ROUND_UP(IF_SETSIZE, NIFBITS)];
+} if_set;
+
+#define IF_SET(n, p)    ((p)->ifs_bits[(n)/NIFBITS] |= (1 << ((n) % NIFBITS)))
+#define IF_CLR(n, p)    ((p)->ifs_bits[(n)/NIFBITS] &= ~(1 << ((n) % NIFBITS)))
+#define IF_ISSET(n, p)  ((p)->ifs_bits[(n)/NIFBITS] & (1 << ((n) % NIFBITS)))
+#define IF_COPY(f, t)   bcopy(f, t, sizeof(*(f)))
+#define IF_ZERO(p)      bzero(p, sizeof(*(p)))
+
+/*
+ *	Passed by mrouted for an MRT_ADD_MIF - again we use the
+ *	mrouted 3.6 structures for compatibility
+ */
+
+struct mif6ctl {
+	mifi_t	mif6c_mifi;		/* Index of MIF */
+	unsigned char mif6c_flags;	/* MIFF_ flags */
+	unsigned char vifc_threshold;	/* ttl limit */
+	__u16	 mif6c_pifi;		/* the index of the physical IF */
+	unsigned int vifc_rate_limit;	/* Rate limiter values (NI) */
+};
+
+#define MIFF_REGISTER	0x1	/* register vif	*/
+
+/*
+ *	Cache manipulation structures for mrouted and PIMd
+ */
+
+struct mf6cctl {
+	struct sockaddr_in6 mf6cc_origin;		/* Origin of mcast	*/
+	struct sockaddr_in6 mf6cc_mcastgrp;		/* Group in question	*/
+	mifi_t	mf6cc_parent;			/* Where it arrived	*/
+	struct if_set mf6cc_ifset;		/* Where it is going */
+};
+
+/*
+ *	Group count retrieval for pim6sd
+ */
+
+struct sioc_sg_req6 {
+	struct sockaddr_in6 src;
+	struct sockaddr_in6 grp;
+	unsigned long pktcnt;
+	unsigned long bytecnt;
+	unsigned long wrong_if;
+};
+
+/*
+ *	To get vif packet counts
+ */
+
+struct sioc_mif_req6 {
+	mifi_t	mifi;		/* Which iface */
+	unsigned long icount;	/* In packets */
+	unsigned long ocount;	/* Out packets */
+	unsigned long ibytes;	/* In bytes */
+	unsigned long obytes;	/* Out bytes */
+};
+
+/*
+ *	That's all usermode folks
+ */
+
+#ifdef __KERNEL__
+
+#include <linux/pim.h>
+#include <linux/skbuff.h>	/* for struct sk_buff_head */
+#include <net/net_namespace.h>
+
+#ifdef CONFIG_IPV6_MROUTE
+static inline int ip6_mroute_opt(int opt)
+{
+	return (opt >= MRT6_BASE) && (opt <= MRT6_BASE + 10);
+}
+#else
+static inline int ip6_mroute_opt(int opt)
+{
+	return 0;
+}
+#endif
+
+struct sock;
+
+#ifdef CONFIG_IPV6_MROUTE
+extern int ip6_mroute_setsockopt(struct sock *, int, char __user *, unsigned int);
+extern int ip6_mroute_getsockopt(struct sock *, int, char __user *, int __user *);
+extern int ip6_mr_input(struct sk_buff *skb);
+extern int ip6mr_ioctl(struct sock *sk, int cmd, void __user *arg);
+extern int ip6mr_compat_ioctl(struct sock *sk, unsigned int cmd, void __user *arg);
+extern int ip6_mr_init(void);
+extern void ip6_mr_cleanup(void);
+#else
+static inline
+int ip6_mroute_setsockopt(struct sock *sock,
+			  int optname, char __user *optval, unsigned int optlen)
+{
+	return -ENOPROTOOPT;
+}
+
+static inline
+int ip6_mroute_getsockopt(struct sock *sock,
+			  int optname, char __user *optval, int __user *optlen)
+{
+	return -ENOPROTOOPT;
+}
+
+static inline
+int ip6mr_ioctl(struct sock *sk, int cmd, void __user *arg)
+{
+	return -ENOIOCTLCMD;
+}
+
+static inline int ip6_mr_init(void)
+{
+	return 0;
+}
+
+static inline void ip6_mr_cleanup(void)
+{
+	return;
+}
+#endif
+
+struct mif_device {
+	struct net_device 	*dev;			/* Device we are using */
+	unsigned long	bytes_in,bytes_out;
+	unsigned long	pkt_in,pkt_out;		/* Statistics 			*/
+	unsigned long	rate_limit;		/* Traffic shaping (NI) 	*/
+	unsigned char	threshold;		/* TTL threshold 		*/
+	unsigned short	flags;			/* Control flags 		*/
+	int		link;			/* Physical interface index	*/
+};
+
+#define VIFF_STATIC 0x8000
+
+struct mfc6_cache {
+	struct list_head list;
+	struct in6_addr mf6c_mcastgrp;			/* Group the entry belongs to 	*/
+	struct in6_addr mf6c_origin;			/* Source of packet 		*/
+	mifi_t mf6c_parent;			/* Source interface		*/
+	int mfc_flags;				/* Flags on line		*/
+
+	union {
+		struct {
+			unsigned long expires;
+			struct sk_buff_head unresolved;	/* Unresolved buffers		*/
+		} unres;
+		struct {
+			unsigned long last_assert;
+			int minvif;
+			int maxvif;
+			unsigned long bytes;
+			unsigned long pkt;
+			unsigned long wrong_if;
+			unsigned char ttls[MAXMIFS];	/* TTL thresholds		*/
+		} res;
+	} mfc_un;
+};
+
+#define MFC_STATIC		1
+#define MFC_NOTIFY		2
+
+#define MFC6_LINES		64
+
+#define MFC6_HASH(a, g) (((__force u32)(a)->s6_addr32[0] ^ \
+			  (__force u32)(a)->s6_addr32[1] ^ \
+			  (__force u32)(a)->s6_addr32[2] ^ \
+			  (__force u32)(a)->s6_addr32[3] ^ \
+			  (__force u32)(g)->s6_addr32[0] ^ \
+			  (__force u32)(g)->s6_addr32[1] ^ \
+			  (__force u32)(g)->s6_addr32[2] ^ \
+			  (__force u32)(g)->s6_addr32[3]) % MFC6_LINES)
+
+#define MFC_ASSERT_THRESH (3*HZ)		/* Maximal freq. of asserts */
+
+#endif
+
+#ifdef __KERNEL__
+struct rtmsg;
+extern int ip6mr_get_route(struct net *net, struct sk_buff *skb,
+			   struct rtmsg *rtm, int nowait);
+
+#ifdef CONFIG_IPV6_MROUTE
+extern struct sock *mroute6_socket(struct net *net, struct sk_buff *skb);
+extern int ip6mr_sk_done(struct sock *sk);
+#else
+static inline struct sock *mroute6_socket(struct net *net, struct sk_buff *skb)
+{
+	return NULL;
+}
+static inline int ip6mr_sk_done(struct sock *sk)
+{
+	return 0;
+}
+#endif
+#endif
+
+/*
+ * Structure used to communicate from kernel to multicast router.
+ * We'll overlay the structure onto an MLD header (not an IPv6 heder like igmpmsg{}
+ * used for IPv4 implementation). This is because this structure will be passed via an
+ * IPv6 raw socket, on which an application will only receiver the payload i.e the data after
+ * the IPv6 header and all the extension headers. (See section 3 of RFC 3542)
+ */
+
+struct mrt6msg {
+#define MRT6MSG_NOCACHE		1
+#define MRT6MSG_WRONGMIF	2
+#define MRT6MSG_WHOLEPKT	3		/* used for use level encap */
+	__u8		im6_mbz;		/* must be zero		   */
+	__u8		im6_msgtype;		/* what type of message    */
+	__u16		im6_mif;		/* mif rec'd on		   */
+	__u32		im6_pad;		/* padding for 64 bit arch */
+	struct in6_addr	im6_src, im6_dst;
+};
+
+#endif
diff --git a/include/linux/msdos_fs.h b/include/linux/msdos_fs.h
new file mode 100644
index 00000000..f38d4f0a
--- /dev/null
+++ b/include/linux/msdos_fs.h
@@ -0,0 +1,185 @@
+#ifndef _LINUX_MSDOS_FS_H
+#define _LINUX_MSDOS_FS_H
+
+#include <linux/types.h>
+#include <linux/magic.h>
+#include <asm/byteorder.h>
+
+/*
+ * The MS-DOS filesystem constants/structures
+ */
+
+#define SECTOR_SIZE	512		/* sector size (bytes) */
+#define SECTOR_BITS	9		/* log2(SECTOR_SIZE) */
+#define MSDOS_DPB	(MSDOS_DPS)	/* dir entries per block */
+#define MSDOS_DPB_BITS	4		/* log2(MSDOS_DPB) */
+#define MSDOS_DPS	(SECTOR_SIZE / sizeof(struct msdos_dir_entry))
+#define MSDOS_DPS_BITS	4		/* log2(MSDOS_DPS) */
+#define MSDOS_LONGNAME	256		/* maximum name length */
+#define CF_LE_W(v)	le16_to_cpu(v)
+#define CF_LE_L(v)	le32_to_cpu(v)
+#define CT_LE_W(v)	cpu_to_le16(v)
+#define CT_LE_L(v)	cpu_to_le32(v)
+
+
+#define MSDOS_ROOT_INO	1	/* == MINIX_ROOT_INO */
+#define MSDOS_DIR_BITS	5	/* log2(sizeof(struct msdos_dir_entry)) */
+
+/* directory limit */
+#define FAT_MAX_DIR_ENTRIES	(65536)
+#define FAT_MAX_DIR_SIZE	(FAT_MAX_DIR_ENTRIES << MSDOS_DIR_BITS)
+
+#define ATTR_NONE	0	/* no attribute bits */
+#define ATTR_RO		1	/* read-only */
+#define ATTR_HIDDEN	2	/* hidden */
+#define ATTR_SYS	4	/* system */
+#define ATTR_VOLUME	8	/* volume label */
+#define ATTR_DIR	16	/* directory */
+#define ATTR_ARCH	32	/* archived */
+
+/* attribute bits that are copied "as is" */
+#define ATTR_UNUSED	(ATTR_VOLUME | ATTR_ARCH | ATTR_SYS | ATTR_HIDDEN)
+/* bits that are used by the Windows 95/Windows NT extended FAT */
+#define ATTR_EXT	(ATTR_RO | ATTR_HIDDEN | ATTR_SYS | ATTR_VOLUME)
+
+#define CASE_LOWER_BASE	8	/* base is lower case */
+#define CASE_LOWER_EXT	16	/* extension is lower case */
+
+#define DELETED_FLAG	0xe5	/* marks file as deleted when in name[0] */
+#define IS_FREE(n)	(!*(n) || *(n) == DELETED_FLAG)
+
+#define FAT_LFN_LEN	255	/* maximum long name length */
+#define MSDOS_NAME	11	/* maximum name length */
+#define MSDOS_SLOTS	21	/* max # of slots for short and long names */
+#define MSDOS_DOT	".          "	/* ".", padded to MSDOS_NAME chars */
+#define MSDOS_DOTDOT	"..         "	/* "..", padded to MSDOS_NAME chars */
+
+#define FAT_FIRST_ENT(s, x)	((MSDOS_SB(s)->fat_bits == 32 ? 0x0FFFFF00 : \
+	MSDOS_SB(s)->fat_bits == 16 ? 0xFF00 : 0xF00) | (x))
+
+/* start of data cluster's entry (number of reserved clusters) */
+#define FAT_START_ENT	2
+
+/* maximum number of clusters */
+#define MAX_FAT12	0xFF4
+#define MAX_FAT16	0xFFF4
+#define MAX_FAT32	0x0FFFFFF6
+#define MAX_FAT(s)	(MSDOS_SB(s)->fat_bits == 32 ? MAX_FAT32 : \
+	MSDOS_SB(s)->fat_bits == 16 ? MAX_FAT16 : MAX_FAT12)
+
+/* bad cluster mark */
+#define BAD_FAT12	0xFF7
+#define BAD_FAT16	0xFFF7
+#define BAD_FAT32	0x0FFFFFF7
+
+/* standard EOF */
+#define EOF_FAT12	0xFFF
+#define EOF_FAT16	0xFFFF
+#define EOF_FAT32	0x0FFFFFFF
+
+#define FAT_ENT_FREE	(0)
+#define FAT_ENT_BAD	(BAD_FAT32)
+#define FAT_ENT_EOF	(EOF_FAT32)
+
+#define FAT_FSINFO_SIG1	0x41615252
+#define FAT_FSINFO_SIG2	0x61417272
+#define IS_FSINFO(x)	(le32_to_cpu((x)->signature1) == FAT_FSINFO_SIG1 \
+			 && le32_to_cpu((x)->signature2) == FAT_FSINFO_SIG2)
+
+struct __fat_dirent {
+	long		d_ino;
+	__kernel_off_t	d_off;
+	unsigned short	d_reclen;
+	char		d_name[256]; /* We must not include limits.h! */
+};
+
+/*
+ * ioctl commands
+ */
+#define VFAT_IOCTL_READDIR_BOTH		_IOR('r', 1, struct __fat_dirent[2])
+#define VFAT_IOCTL_READDIR_SHORT	_IOR('r', 2, struct __fat_dirent[2])
+/* <linux/videotext.h> has used 0x72 ('r') in collision, so skip a few */
+#define FAT_IOCTL_GET_ATTRIBUTES	_IOR('r', 0x10, __u32)
+#define FAT_IOCTL_SET_ATTRIBUTES	_IOW('r', 0x11, __u32)
+#define VFAT_IOCTL_GET_VOLUME_ID	_IOR('r', 0x12, __u32)
+
+struct fat_boot_sector {
+	__u8	ignored[3];	/* Boot strap short or near jump */
+	__u8	system_id[8];	/* Name - can be used to special case
+				   partition manager volumes */
+	__u8	sector_size[2];	/* bytes per logical sector */
+	__u8	sec_per_clus;	/* sectors/cluster */
+	__le16	reserved;	/* reserved sectors */
+	__u8	fats;		/* number of FATs */
+	__u8	dir_entries[2];	/* root directory entries */
+	__u8	sectors[2];	/* number of sectors */
+	__u8	media;		/* media code */
+	__le16	fat_length;	/* sectors/FAT */
+	__le16	secs_track;	/* sectors per track */
+	__le16	heads;		/* number of heads */
+	__le32	hidden;		/* hidden sectors (unused) */
+	__le32	total_sect;	/* number of sectors (if sectors == 0) */
+
+	/* The following fields are only used by FAT32 */
+	__le32	fat32_length;	/* sectors/FAT */
+	__le16	flags;		/* bit 8: fat mirroring, low 4: active fat */
+	__u8	version[2];	/* major, minor filesystem version */
+	__le32	root_cluster;	/* first cluster in root directory */
+	__le16	info_sector;	/* filesystem info sector */
+	__le16	backup_boot;	/* backup boot sector */
+	__le16	reserved2[6];	/* Unused */
+};
+
+struct fat_boot_fsinfo {
+	__le32   signature1;	/* 0x41615252L */
+	__le32   reserved1[120];	/* Nothing as far as I can tell */
+	__le32   signature2;	/* 0x61417272L */
+	__le32   free_clusters;	/* Free cluster count.  -1 if unknown */
+	__le32   next_cluster;	/* Most recently allocated cluster */
+	__le32   reserved2[4];
+};
+
+struct fat_boot_bsx {
+	__u8     drive;		    /* drive number */
+	__u8     reserved1;
+	__u8     signature;	    /* extended boot signature */
+	__u8     vol_id[4];     /* volume ID */
+	__u8     vol_label[11]; /* volume label */
+	__u8     type[8];       /* file system type */
+};
+#define FAT16_BSX_OFFSET	36 /* offset of fat_boot_bsx in FAT12 and FAT16 */
+#define FAT32_BSX_OFFSET	64 /* offset of fat_boot_bsx in FAT32 */
+
+struct msdos_dir_entry {
+	__u8	name[MSDOS_NAME];/* name and extension */
+	__u8	attr;		/* attribute bits */
+	__u8    lcase;		/* Case for base and extension */
+	__u8	ctime_cs;	/* Creation time, centiseconds (0-199) */
+	__le16	ctime;		/* Creation time */
+	__le16	cdate;		/* Creation date */
+	__le16	adate;		/* Last access date */
+	__le16	starthi;	/* High 16 bits of cluster in FAT32 */
+	__le16	time,date,start;/* time, date and first cluster */
+	__le32	size;		/* file size (in bytes) */
+};
+
+/* Up to 13 characters of the name */
+struct msdos_dir_slot {
+	__u8    id;		/* sequence number for slot */
+	__u8    name0_4[10];	/* first 5 characters in name */
+	__u8    attr;		/* attribute byte */
+	__u8    reserved;	/* always 0 */
+	__u8    alias_checksum;	/* checksum for 8.3 alias */
+	__u8    name5_10[12];	/* 6 more characters in name */
+	__le16   start;		/* starting cluster number, 0 in long slots */
+	__u8    name11_12[4];	/* last 2 characters in name */
+};
+
+#ifdef __KERNEL__
+/* media of boot sector */
+static inline int fat_valid_media(u8 media)
+{
+	return 0xf8 <= media || media == 0xf0;
+}
+#endif /* !__KERNEL__ */
+#endif /* !_LINUX_MSDOS_FS_H */
diff --git a/include/linux/msg.h b/include/linux/msg.h
new file mode 100644
index 00000000..56abf155
--- /dev/null
+++ b/include/linux/msg.h
@@ -0,0 +1,112 @@
+#ifndef _LINUX_MSG_H
+#define _LINUX_MSG_H
+
+#include <linux/ipc.h>
+
+/* ipcs ctl commands */
+#define MSG_STAT 11
+#define MSG_INFO 12
+
+/* msgrcv options */
+#define MSG_NOERROR     010000  /* no error if message is too big */
+#define MSG_EXCEPT      020000  /* recv any msg except of specified type.*/
+
+/* Obsolete, used only for backwards compatibility and libc5 compiles */
+struct msqid_ds {
+	struct ipc_perm msg_perm;
+	struct msg *msg_first;		/* first message on queue,unused  */
+	struct msg *msg_last;		/* last message in queue,unused */
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long  msg_lcbytes;	/* Reuse junk fields for 32 bit */
+	unsigned long  msg_lqbytes;	/* ditto */
+	unsigned short msg_cbytes;	/* current number of bytes on queue */
+	unsigned short msg_qnum;	/* number of messages in queue */
+	unsigned short msg_qbytes;	/* max number of bytes on queue */
+	__kernel_ipc_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_ipc_pid_t msg_lrpid;	/* last receive pid */
+};
+
+/* Include the definition of msqid64_ds */
+#include <asm/msgbuf.h>
+
+/* message buffer for msgsnd and msgrcv calls */
+struct msgbuf {
+	long mtype;         /* type of message */
+	char mtext[1];      /* message text */
+};
+
+/* buffer for msgctl calls IPC_INFO, MSG_INFO */
+struct msginfo {
+	int msgpool;
+	int msgmap; 
+	int msgmax; 
+	int msgmnb; 
+	int msgmni; 
+	int msgssz; 
+	int msgtql; 
+	unsigned short  msgseg; 
+};
+
+/*
+ * Scaling factor to compute msgmni:
+ * the memory dedicated to msg queues (msgmni * msgmnb) should occupy
+ * at most 1/MSG_MEM_SCALE of the lowmem (see the formula in ipc/msg.c):
+ * up to 8MB       : msgmni = 16 (MSGMNI)
+ * 4 GB            : msgmni = 8K
+ * more than 16 GB : msgmni = 32K (IPCMNI)
+ */
+#define MSG_MEM_SCALE 32
+
+#define MSGMNI    16   /* <= IPCMNI */     /* max # of msg queue identifiers */
+#define MSGMAX  8192   /* <= INT_MAX */   /* max size of message (bytes) */
+#define MSGMNB 16384   /* <= INT_MAX */   /* default max size of a message queue */
+
+/* unused */
+#define MSGPOOL (MSGMNI * MSGMNB / 1024) /* size in kbytes of message pool */
+#define MSGTQL  MSGMNB            /* number of system message headers */
+#define MSGMAP  MSGMNB            /* number of entries in message map */
+#define MSGSSZ  16                /* message segment size */
+#define __MSGSEG ((MSGPOOL * 1024) / MSGSSZ) /* max no. of segments */
+#define MSGSEG (__MSGSEG <= 0xffff ? __MSGSEG : 0xffff)
+
+#ifdef __KERNEL__
+#include <linux/list.h>
+
+/* one msg_msg structure for each message */
+struct msg_msg {
+	struct list_head m_list; 
+	long  m_type;          
+	int m_ts;           /* message text size */
+	struct msg_msgseg* next;
+	void *security;
+	/* the actual message follows immediately */
+};
+
+/* one msq_queue structure for each present queue on the system */
+struct msg_queue {
+	struct kern_ipc_perm q_perm;
+	time_t q_stime;			/* last msgsnd time */
+	time_t q_rtime;			/* last msgrcv time */
+	time_t q_ctime;			/* last change time */
+	unsigned long q_cbytes;		/* current number of bytes on queue */
+	unsigned long q_qnum;		/* number of messages in queue */
+	unsigned long q_qbytes;		/* max number of bytes on queue */
+	pid_t q_lspid;			/* pid of last msgsnd */
+	pid_t q_lrpid;			/* last receive pid */
+
+	struct list_head q_messages;
+	struct list_head q_receivers;
+	struct list_head q_senders;
+};
+
+/* Helper routines for sys_msgsnd and sys_msgrcv */
+extern long do_msgsnd(int msqid, long mtype, void __user *mtext,
+			size_t msgsz, int msgflg);
+extern long do_msgrcv(int msqid, long *pmtype, void __user *mtext,
+			size_t msgsz, long msgtyp, int msgflg);
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_MSG_H */
diff --git a/include/linux/msi.h b/include/linux/msi.h
new file mode 100644
index 00000000..ce93a341
--- /dev/null
+++ b/include/linux/msi.h
@@ -0,0 +1,62 @@
+#ifndef LINUX_MSI_H
+#define LINUX_MSI_H
+
+#include <linux/kobject.h>
+#include <linux/list.h>
+
+struct msi_msg {
+	u32	address_lo;	/* low 32 bits of msi message address */
+	u32	address_hi;	/* high 32 bits of msi message address */
+	u32	data;		/* 16 bits of msi message data */
+};
+
+/* Helper functions */
+struct irq_data;
+struct msi_desc;
+extern void mask_msi_irq(struct irq_data *data);
+extern void unmask_msi_irq(struct irq_data *data);
+extern void __read_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
+extern void __get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
+extern void __write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
+extern void read_msi_msg(unsigned int irq, struct msi_msg *msg);
+extern void get_cached_msi_msg(unsigned int irq, struct msi_msg *msg);
+extern void write_msi_msg(unsigned int irq, struct msi_msg *msg);
+
+struct msi_desc {
+	struct {
+		__u8	is_msix	: 1;
+		__u8	multiple: 3;	/* log2 number of messages */
+		__u8	maskbit	: 1; 	/* mask-pending bit supported ?   */
+		__u8	is_64	: 1;	/* Address size: 0=32bit 1=64bit  */
+		__u8	pos;	 	/* Location of the msi capability */
+		__u16	entry_nr;    	/* specific enabled entry 	  */
+		unsigned default_irq;	/* default pre-assigned irq	  */
+	} msi_attrib;
+
+	u32 masked;			/* mask bits */
+	unsigned int irq;
+	struct list_head list;
+
+	union {
+		void __iomem *mask_base;
+		u8 mask_pos;
+	};
+	struct pci_dev *dev;
+
+	/* Last set MSI message */
+	struct msi_msg msg;
+
+	struct kobject kobj;
+};
+
+/*
+ * The arch hook for setup up msi irqs
+ */
+int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc);
+void arch_teardown_msi_irq(unsigned int irq);
+extern int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
+extern void arch_teardown_msi_irqs(struct pci_dev *dev);
+extern int arch_msi_check_device(struct pci_dev* dev, int nvec, int type);
+
+
+#endif /* LINUX_MSI_H */
diff --git a/include/linux/msm_mdp.h b/include/linux/msm_mdp.h
new file mode 100644
index 00000000..fe722c1f
--- /dev/null
+++ b/include/linux/msm_mdp.h
@@ -0,0 +1,79 @@
+/* include/linux/msm_mdp.h
+ *
+ * Copyright (C) 2007 Google Incorporated
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef _MSM_MDP_H_
+#define _MSM_MDP_H_
+
+#include <linux/types.h>
+
+#define MSMFB_IOCTL_MAGIC 'm'
+#define MSMFB_GRP_DISP          _IOW(MSMFB_IOCTL_MAGIC, 1, unsigned int)
+#define MSMFB_BLIT              _IOW(MSMFB_IOCTL_MAGIC, 2, unsigned int)
+
+enum {
+	MDP_RGB_565,		/* RGB 565 planar */
+	MDP_XRGB_8888,		/* RGB 888 padded */
+	MDP_Y_CBCR_H2V2,	/* Y and CbCr, pseudo planar w/ Cb is in MSB */
+	MDP_ARGB_8888,		/* ARGB 888 */
+	MDP_RGB_888,		/* RGB 888 planar */
+	MDP_Y_CRCB_H2V2,	/* Y and CrCb, pseudo planar w/ Cr is in MSB */
+	MDP_YCRYCB_H2V1,	/* YCrYCb interleave */
+	MDP_Y_CRCB_H2V1,	/* Y and CrCb, pseduo planar w/ Cr is in MSB */
+	MDP_Y_CBCR_H2V1,	/* Y and CrCb, pseduo planar w/ Cr is in MSB */
+	MDP_RGBA_8888,		/* ARGB 888 */
+	MDP_BGRA_8888,		/* ABGR 888 */
+	MDP_RGBX_8888,		/* RGBX 888 */
+	MDP_IMGTYPE_LIMIT	/* Non valid image type after this enum */
+};
+
+enum {
+	PMEM_IMG,
+	FB_IMG,
+};
+
+/* flag values */
+#define MDP_ROT_NOP	0
+#define MDP_FLIP_LR	0x1
+#define MDP_FLIP_UD	0x2
+#define MDP_ROT_90	0x4
+#define MDP_ROT_180	(MDP_FLIP_UD|MDP_FLIP_LR)
+#define MDP_ROT_270	(MDP_ROT_90|MDP_FLIP_UD|MDP_FLIP_LR)
+#define MDP_DITHER	0x8
+#define MDP_BLUR	0x10
+
+#define MDP_TRANSP_NOP	0xffffffff
+#define MDP_ALPHA_NOP	0xff
+
+struct mdp_rect {
+	u32 x, y, w, h;
+};
+
+struct mdp_img {
+	u32 width, height, format, offset;
+	int memory_id;		/* the file descriptor */
+};
+
+struct mdp_blit_req {
+	struct mdp_img src;
+	struct mdp_img dst;
+	struct mdp_rect src_rect;
+	struct mdp_rect dst_rect;
+	u32 alpha, transp_mask, flags;
+};
+
+struct mdp_blit_req_list {
+	u32 count;
+	struct mdp_blit_req req[];
+};
+
+#endif /* _MSM_MDP_H_ */
diff --git a/include/linux/mt5931_6622.h b/include/linux/mt5931_6622.h
new file mode 100755
index 00000000..e7715119
--- /dev/null
+++ b/include/linux/mt5931_6622.h
@@ -0,0 +1,26 @@
+
+
+#ifndef __MT5931__H__
+#define __MT5931__H__
+
+struct mt5931_sdio_eint_platform_data {
+	/* used for sdio eint. */
+	int sdio_eint;
+};
+
+struct mtk_mt5931_platform_data {
+	/* GPIO pin config */
+	int pmu;
+	int rst;
+};
+
+struct mtk_mt6622_platform_data {
+	/* GPIO pin config */
+	int pmu;
+	int rst;
+
+	/* used for bt eint. */
+	int bt_eint;
+};
+
+#endif
diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h
new file mode 100644
index 00000000..5bc50e08
--- /dev/null
+++ b/include/linux/mtd/bbm.h
@@ -0,0 +1,176 @@
+/*
+ *  linux/include/linux/mtd/bbm.h
+ *
+ *  NAND family Bad Block Management (BBM) header file
+ *    - Bad Block Table (BBT) implementation
+ *
+ *  Copyright © 2005 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ *  Copyright © 2000-2005
+ *  Thomas Gleixner <tglx@linuxtronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+#ifndef __LINUX_MTD_BBM_H
+#define __LINUX_MTD_BBM_H
+
+/* The maximum number of NAND chips in an array */
+#define NAND_MAX_CHIPS		8
+
+/**
+ * struct nand_bbt_descr - bad block table descriptor
+ * @options:	options for this descriptor
+ * @pages:	the page(s) where we find the bbt, used with option BBT_ABSPAGE
+ *		when bbt is searched, then we store the found bbts pages here.
+ *		Its an array and supports up to 8 chips now
+ * @offs:	offset of the pattern in the oob area of the page
+ * @veroffs:	offset of the bbt version counter in the oob are of the page
+ * @version:	version read from the bbt page during scan
+ * @len:	length of the pattern, if 0 no pattern check is performed
+ * @maxblocks:	maximum number of blocks to search for a bbt. This number of
+ *		blocks is reserved at the end of the device where the tables are
+ *		written.
+ * @reserved_block_code: if non-0, this pattern denotes a reserved (rather than
+ *              bad) block in the stored bbt
+ * @pattern:	pattern to identify bad block table or factory marked good /
+ *		bad blocks, can be NULL, if len = 0
+ *
+ * Descriptor for the bad block table marker and the descriptor for the
+ * pattern which identifies good and bad blocks. The assumption is made
+ * that the pattern and the version count are always located in the oob area
+ * of the first block.
+ */
+struct nand_bbt_descr {
+	int options;
+	int pages[NAND_MAX_CHIPS];
+	int offs;
+	int veroffs;
+	uint8_t version[NAND_MAX_CHIPS];
+	int len;
+	int maxblocks;
+	int reserved_block_code;
+	uint8_t *pattern;
+	int	page_offset[2]; /* used to record bad block signature in which pages.*/
+};
+
+/* Options for the bad block table descriptors */
+
+/* The number of bits used per block in the bbt on the device */
+#define NAND_BBT_NRBITS_MSK	0x0000000F
+#define NAND_BBT_1BIT		0x00000001
+#define NAND_BBT_2BIT		0x00000002
+#define NAND_BBT_4BIT		0x00000004
+#define NAND_BBT_8BIT		0x00000008
+/* The bad block table is in the last good block of the device */
+#define NAND_BBT_LASTBLOCK	0x00000010
+/* The bbt is at the given page, else we must scan for the bbt */
+#define NAND_BBT_ABSPAGE	0x00000020
+/* The bbt is at the given page, else we must scan for the bbt */
+#define NAND_BBT_SEARCH		0x00000040
+/* bbt is stored per chip on multichip devices */
+#define NAND_BBT_PERCHIP	0x00000080
+/* bbt has a version counter at offset veroffs */
+#define NAND_BBT_VERSION	0x00000100
+/* Create a bbt if none exists */
+#define NAND_BBT_CREATE		0x00000200
+/*
+ * Create an empty BBT with no vendor information. Vendor's information may be
+ * unavailable, for example, if the NAND controller has a different data and OOB
+ * layout or if this information is already purged. Must be used in conjunction
+ * with NAND_BBT_CREATE.
+ */
+#define NAND_BBT_CREATE_EMPTY	0x00000400
+/* Search good / bad pattern through all pages of a block */
+#define NAND_BBT_SCANALLPAGES	0x00000800
+/* Scan block empty during good / bad block scan */
+#define NAND_BBT_SCANEMPTY	0x00001000
+/* Write bbt if neccecary */
+#define NAND_BBT_WRITE		0x00002000
+/* Read and write back block contents when writing bbt */
+#define NAND_BBT_SAVECONTENT	0x00004000
+/* Search good / bad pattern on the first and the second page */
+#define NAND_BBT_SCAN2NDPAGE	0x00008000
+/* Search good / bad pattern on the last page of the eraseblock */
+#define NAND_BBT_SCANLASTPAGE	0x00010000
+/*
+ * Use a flash based bad block table. By default, OOB identifier is saved in
+ * OOB area. This option is passed to the default bad block table function.
+ */
+#define NAND_BBT_USE_FLASH	0x00020000
+/* Do not store flash based bad block table in OOB area; store it in-band */
+#define NAND_BBT_NO_OOB		0x00040000
+/*
+ * Do not write new bad block markers to OOB; useful, e.g., when ECC covers
+ * entire spare area. Must be used with NAND_BBT_USE_FLASH.
+ */
+#define NAND_BBT_NO_OOB_BBM	0x00080000
+
+/*
+ * Flag set by nand_create_default_bbt_descr(), marking that the nand_bbt_descr
+ * was allocated dynamicaly and must be freed in nand_release(). Has no meaning
+ * in nand_chip.bbt_options.
+ */
+#define NAND_BBT_DYNAMICSTRUCT	0x80000000
+
+/* The maximum number of blocks to scan for a bbt */
+#define NAND_BBT_SCAN_MAXBLOCKS	4
+
+/*
+ * Constants for oob configuration
+ */
+#define NAND_SMALL_BADBLOCK_POS		5
+#define NAND_LARGE_BADBLOCK_POS		0
+#define ONENAND_BADBLOCK_POS		0
+
+/*
+ * Bad block scanning errors
+ */
+#define ONENAND_BBT_READ_ERROR		1
+#define ONENAND_BBT_READ_ECC_ERROR	2
+#define ONENAND_BBT_READ_FATAL_ERROR	4
+
+/**
+ * struct bbm_info - [GENERIC] Bad Block Table data structure
+ * @bbt_erase_shift:	[INTERN] number of address bits in a bbt entry
+ * @badblockpos:	[INTERN] position of the bad block marker in the oob area
+ * @options:		options for this descriptor
+ * @bbt:		[INTERN] bad block table pointer
+ * @isbad_bbt:		function to determine if a block is bad
+ * @badblock_pattern:	[REPLACEABLE] bad block scan pattern used for
+ *			initial bad block scan
+ * @priv:		[OPTIONAL] pointer to private bbm date
+ */
+struct bbm_info {
+	int bbt_erase_shift;
+	int badblockpos;
+	int options;
+
+	uint8_t *bbt;
+
+	int (*isbad_bbt)(struct mtd_info *mtd, loff_t ofs, int allowbbt);
+
+	/* TODO Add more NAND specific fileds */
+	struct nand_bbt_descr *badblock_pattern;
+
+	void *priv;
+};
+
+/* OneNAND BBT interface */
+extern int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd);
+extern int onenand_default_bbt(struct mtd_info *mtd);
+
+#endif	/* __LINUX_MTD_BBM_H */
diff --git a/include/linux/mtd/blktrans.h b/include/linux/mtd/blktrans.h
new file mode 100644
index 00000000..ed270bd2
--- /dev/null
+++ b/include/linux/mtd/blktrans.h
@@ -0,0 +1,94 @@
+/*
+ * Copyright © 2003-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifndef __MTD_TRANS_H__
+#define __MTD_TRANS_H__
+
+#include <linux/mutex.h>
+#include <linux/kref.h>
+#include <linux/sysfs.h>
+
+struct hd_geometry;
+struct mtd_info;
+struct mtd_blktrans_ops;
+struct file;
+struct inode;
+
+struct mtd_blktrans_dev {
+	struct mtd_blktrans_ops *tr;
+	struct list_head list;
+	struct mtd_info *mtd;
+	struct mutex lock;
+	int devnum;
+	bool bg_stop;
+	unsigned long size;
+	int readonly;
+	int open;
+	struct kref ref;
+	struct gendisk *disk;
+	struct attribute_group *disk_attributes;
+	struct task_struct *thread;
+	struct request_queue *rq;
+	spinlock_t queue_lock;
+	void *priv;
+	fmode_t file_mode;
+};
+
+struct mtd_blktrans_ops {
+	char *name;
+	int major;
+	int part_bits;
+	int blksize;
+	int blkshift;
+
+	/* Access functions */
+	int (*readsect)(struct mtd_blktrans_dev *dev,
+		    unsigned long block, char *buffer);
+	int (*writesect)(struct mtd_blktrans_dev *dev,
+		     unsigned long block, char *buffer);
+	int (*discard)(struct mtd_blktrans_dev *dev,
+		       unsigned long block, unsigned nr_blocks);
+	void (*background)(struct mtd_blktrans_dev *dev);
+
+	/* Block layer ioctls */
+	int (*getgeo)(struct mtd_blktrans_dev *dev, struct hd_geometry *geo);
+	int (*flush)(struct mtd_blktrans_dev *dev);
+
+	/* Called with mtd_table_mutex held; no race with add/remove */
+	int (*open)(struct mtd_blktrans_dev *dev);
+	int (*release)(struct mtd_blktrans_dev *dev);
+
+	/* Called on {de,}registration and on subsequent addition/removal
+	   of devices, with mtd_table_mutex held. */
+	void (*add_mtd)(struct mtd_blktrans_ops *tr, struct mtd_info *mtd);
+	void (*remove_dev)(struct mtd_blktrans_dev *dev);
+
+	struct list_head devs;
+	struct list_head list;
+	struct module *owner;
+};
+
+extern int register_mtd_blktrans(struct mtd_blktrans_ops *tr);
+extern int deregister_mtd_blktrans(struct mtd_blktrans_ops *tr);
+extern int add_mtd_blktrans_dev(struct mtd_blktrans_dev *dev);
+extern int del_mtd_blktrans_dev(struct mtd_blktrans_dev *dev);
+extern int mtd_blktrans_cease_background(struct mtd_blktrans_dev *dev);
+
+
+#endif /* __MTD_TRANS_H__ */
diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h
new file mode 100644
index 00000000..37ef6b19
--- /dev/null
+++ b/include/linux/mtd/cfi.h
@@ -0,0 +1,564 @@
+/*
+ * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org> et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifndef __MTD_CFI_H__
+#define __MTD_CFI_H__
+
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/bug.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/flashchip.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/cfi_endian.h>
+#include <linux/mtd/xip.h>
+
+#ifdef CONFIG_MTD_CFI_I1
+#define cfi_interleave(cfi) 1
+#define cfi_interleave_is_1(cfi) (cfi_interleave(cfi) == 1)
+#else
+#define cfi_interleave_is_1(cfi) (0)
+#endif
+
+#ifdef CONFIG_MTD_CFI_I2
+# ifdef cfi_interleave
+#  undef cfi_interleave
+#  define cfi_interleave(cfi) ((cfi)->interleave)
+# else
+#  define cfi_interleave(cfi) 2
+# endif
+#define cfi_interleave_is_2(cfi) (cfi_interleave(cfi) == 2)
+#else
+#define cfi_interleave_is_2(cfi) (0)
+#endif
+
+#ifdef CONFIG_MTD_CFI_I4
+# ifdef cfi_interleave
+#  undef cfi_interleave
+#  define cfi_interleave(cfi) ((cfi)->interleave)
+# else
+#  define cfi_interleave(cfi) 4
+# endif
+#define cfi_interleave_is_4(cfi) (cfi_interleave(cfi) == 4)
+#else
+#define cfi_interleave_is_4(cfi) (0)
+#endif
+
+#ifdef CONFIG_MTD_CFI_I8
+# ifdef cfi_interleave
+#  undef cfi_interleave
+#  define cfi_interleave(cfi) ((cfi)->interleave)
+# else
+#  define cfi_interleave(cfi) 8
+# endif
+#define cfi_interleave_is_8(cfi) (cfi_interleave(cfi) == 8)
+#else
+#define cfi_interleave_is_8(cfi) (0)
+#endif
+
+#ifndef cfi_interleave
+#warning No CONFIG_MTD_CFI_Ix selected. No NOR chip support can work.
+static inline int cfi_interleave(void *cfi)
+{
+	BUG();
+	return 0;
+}
+#endif
+
+static inline int cfi_interleave_supported(int i)
+{
+	switch (i) {
+#ifdef CONFIG_MTD_CFI_I1
+	case 1:
+#endif
+#ifdef CONFIG_MTD_CFI_I2
+	case 2:
+#endif
+#ifdef CONFIG_MTD_CFI_I4
+	case 4:
+#endif
+#ifdef CONFIG_MTD_CFI_I8
+	case 8:
+#endif
+		return 1;
+
+	default:
+		return 0;
+	}
+}
+
+
+/* NB: these values must represents the number of bytes needed to meet the
+ *     device type (x8, x16, x32).  Eg. a 32 bit device is 4 x 8 bytes.
+ *     These numbers are used in calculations.
+ */
+#define CFI_DEVICETYPE_X8  (8 / 8)
+#define CFI_DEVICETYPE_X16 (16 / 8)
+#define CFI_DEVICETYPE_X32 (32 / 8)
+#define CFI_DEVICETYPE_X64 (64 / 8)
+
+
+/* Device Interface Code Assignments from the "Common Flash Memory Interface
+ * Publication 100" dated December 1, 2001.
+ */
+#define CFI_INTERFACE_X8_ASYNC		0x0000
+#define CFI_INTERFACE_X16_ASYNC		0x0001
+#define CFI_INTERFACE_X8_BY_X16_ASYNC	0x0002
+#define CFI_INTERFACE_X32_ASYNC		0x0003
+#define CFI_INTERFACE_X16_BY_X32_ASYNC	0x0005
+#define CFI_INTERFACE_NOT_ALLOWED	0xffff
+
+
+/* NB: We keep these structures in memory in HOST byteorder, except
+ * where individually noted.
+ */
+
+/* Basic Query Structure */
+struct cfi_ident {
+	uint8_t  qry[3];
+	uint16_t P_ID;
+	uint16_t P_ADR;
+	uint16_t A_ID;
+	uint16_t A_ADR;
+	uint8_t  VccMin;
+	uint8_t  VccMax;
+	uint8_t  VppMin;
+	uint8_t  VppMax;
+	uint8_t  WordWriteTimeoutTyp;
+	uint8_t  BufWriteTimeoutTyp;
+	uint8_t  BlockEraseTimeoutTyp;
+	uint8_t  ChipEraseTimeoutTyp;
+	uint8_t  WordWriteTimeoutMax;
+	uint8_t  BufWriteTimeoutMax;
+	uint8_t  BlockEraseTimeoutMax;
+	uint8_t  ChipEraseTimeoutMax;
+	uint8_t  DevSize;
+	uint16_t InterfaceDesc;
+	uint16_t MaxBufWriteSize;
+	uint8_t  NumEraseRegions;
+	uint32_t EraseRegionInfo[0]; /* Not host ordered */
+} __attribute__((packed));
+
+/* Extended Query Structure for both PRI and ALT */
+
+struct cfi_extquery {
+	uint8_t  pri[3];
+	uint8_t  MajorVersion;
+	uint8_t  MinorVersion;
+} __attribute__((packed));
+
+/* Vendor-Specific PRI for Intel/Sharp Extended Command Set (0x0001) */
+
+struct cfi_pri_intelext {
+	uint8_t  pri[3];
+	uint8_t  MajorVersion;
+	uint8_t  MinorVersion;
+	uint32_t FeatureSupport; /* if bit 31 is set then an additional uint32_t feature
+				    block follows - FIXME - not currently supported */
+	uint8_t  SuspendCmdSupport;
+	uint16_t BlkStatusRegMask;
+	uint8_t  VccOptimal;
+	uint8_t  VppOptimal;
+	uint8_t  NumProtectionFields;
+	uint16_t ProtRegAddr;
+	uint8_t  FactProtRegSize;
+	uint8_t  UserProtRegSize;
+	uint8_t  extra[0];
+} __attribute__((packed));
+
+struct cfi_intelext_otpinfo {
+	uint32_t ProtRegAddr;
+	uint16_t FactGroups;
+	uint8_t  FactProtRegSize;
+	uint16_t UserGroups;
+	uint8_t  UserProtRegSize;
+} __attribute__((packed));
+
+struct cfi_intelext_blockinfo {
+	uint16_t NumIdentBlocks;
+	uint16_t BlockSize;
+	uint16_t MinBlockEraseCycles;
+	uint8_t  BitsPerCell;
+	uint8_t  BlockCap;
+} __attribute__((packed));
+
+struct cfi_intelext_regioninfo {
+	uint16_t NumIdentPartitions;
+	uint8_t  NumOpAllowed;
+	uint8_t  NumOpAllowedSimProgMode;
+	uint8_t  NumOpAllowedSimEraMode;
+	uint8_t  NumBlockTypes;
+	struct cfi_intelext_blockinfo BlockTypes[1];
+} __attribute__((packed));
+
+struct cfi_intelext_programming_regioninfo {
+	uint8_t  ProgRegShift;
+	uint8_t  Reserved1;
+	uint8_t  ControlValid;
+	uint8_t  Reserved2;
+	uint8_t  ControlInvalid;
+	uint8_t  Reserved3;
+} __attribute__((packed));
+
+/* Vendor-Specific PRI for AMD/Fujitsu Extended Command Set (0x0002) */
+
+struct cfi_pri_amdstd {
+	uint8_t  pri[3];
+	uint8_t  MajorVersion;
+	uint8_t  MinorVersion;
+	uint8_t  SiliconRevision; /* bits 1-0: Address Sensitive Unlock */
+	uint8_t  EraseSuspend;
+	uint8_t  BlkProt;
+	uint8_t  TmpBlkUnprotect;
+	uint8_t  BlkProtUnprot;
+	uint8_t  SimultaneousOps;
+	uint8_t  BurstMode;
+	uint8_t  PageMode;
+	uint8_t  VppMin;
+	uint8_t  VppMax;
+	uint8_t  TopBottom;
+} __attribute__((packed));
+
+/* Vendor-Specific PRI for Atmel chips (command set 0x0002) */
+
+struct cfi_pri_atmel {
+	uint8_t pri[3];
+	uint8_t MajorVersion;
+	uint8_t MinorVersion;
+	uint8_t Features;
+	uint8_t BottomBoot;
+	uint8_t BurstMode;
+	uint8_t PageMode;
+} __attribute__((packed));
+
+struct cfi_pri_query {
+	uint8_t  NumFields;
+	uint32_t ProtField[1]; /* Not host ordered */
+} __attribute__((packed));
+
+struct cfi_bri_query {
+	uint8_t  PageModeReadCap;
+	uint8_t  NumFields;
+	uint32_t ConfField[1]; /* Not host ordered */
+} __attribute__((packed));
+
+#define P_ID_NONE               0x0000
+#define P_ID_INTEL_EXT          0x0001
+#define P_ID_AMD_STD            0x0002
+#define P_ID_INTEL_STD          0x0003
+#define P_ID_AMD_EXT            0x0004
+#define P_ID_WINBOND            0x0006
+#define P_ID_ST_ADV             0x0020
+#define P_ID_MITSUBISHI_STD     0x0100
+#define P_ID_MITSUBISHI_EXT     0x0101
+#define P_ID_SST_PAGE           0x0102
+#define P_ID_SST_OLD            0x0701
+#define P_ID_INTEL_PERFORMANCE  0x0200
+#define P_ID_INTEL_DATA         0x0210
+#define P_ID_RESERVED           0xffff
+
+
+#define CFI_MODE_CFI	1
+#define CFI_MODE_JEDEC	0
+
+struct cfi_private {
+	uint16_t cmdset;
+	void *cmdset_priv;
+	int interleave;
+	int device_type;
+	int cfi_mode;		/* Are we a JEDEC device pretending to be CFI? */
+	int addr_unlock1;
+	int addr_unlock2;
+	struct mtd_info *(*cmdset_setup)(struct map_info *);
+	struct cfi_ident *cfiq; /* For now only one. We insist that all devs
+				  must be of the same type. */
+	int mfr, id;
+	int numchips;
+	map_word sector_erase_cmd;
+	unsigned long chipshift; /* Because they're of the same type */
+	const char *im_name;	 /* inter_module name for cmdset_setup */
+	struct flchip chips[0];  /* per-chip data structure for each chip */
+};
+
+/*
+ * Returns the command address according to the given geometry.
+ */
+static inline uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs,
+				struct map_info *map, struct cfi_private *cfi)
+{
+	unsigned bankwidth = map_bankwidth(map);
+	unsigned interleave = cfi_interleave(cfi);
+	unsigned type = cfi->device_type;
+	uint32_t addr;
+	
+	addr = (cmd_ofs * type) * interleave;
+
+	/* Modify the unlock address if we are in compatibility mode.
+	 * For 16bit devices on 8 bit busses
+	 * and 32bit devices on 16 bit busses
+	 * set the low bit of the alternating bit sequence of the address.
+	 */
+	if (((type * interleave) > bankwidth) && ((cmd_ofs & 0xff) == 0xaa))
+		addr |= (type >> 1)*interleave;
+
+	return  addr;
+}
+
+/*
+ * Transforms the CFI command for the given geometry (bus width & interleave).
+ * It looks too long to be inline, but in the common case it should almost all
+ * get optimised away.
+ */
+static inline map_word cfi_build_cmd(u_long cmd, struct map_info *map, struct cfi_private *cfi)
+{
+	map_word val = { {0} };
+	int wordwidth, words_per_bus, chip_mode, chips_per_word;
+	unsigned long onecmd;
+	int i;
+
+	/* We do it this way to give the compiler a fighting chance
+	   of optimising away all the crap for 'bankwidth' larger than
+	   an unsigned long, in the common case where that support is
+	   disabled */
+	if (map_bankwidth_is_large(map)) {
+		wordwidth = sizeof(unsigned long);
+		words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1
+	} else {
+		wordwidth = map_bankwidth(map);
+		words_per_bus = 1;
+	}
+
+	chip_mode = map_bankwidth(map) / cfi_interleave(cfi);
+	chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map);
+
+	/* First, determine what the bit-pattern should be for a single
+	   device, according to chip mode and endianness... */
+	switch (chip_mode) {
+	default: BUG();
+	case 1:
+		onecmd = cmd;
+		break;
+	case 2:
+		onecmd = cpu_to_cfi16(map, cmd);
+		break;
+	case 4:
+		onecmd = cpu_to_cfi32(map, cmd);
+		break;
+	}
+
+	/* Now replicate it across the size of an unsigned long, or
+	   just to the bus width as appropriate */
+	switch (chips_per_word) {
+	default: BUG();
+#if BITS_PER_LONG >= 64
+	case 8:
+		onecmd |= (onecmd << (chip_mode * 32));
+#endif
+	case 4:
+		onecmd |= (onecmd << (chip_mode * 16));
+	case 2:
+		onecmd |= (onecmd << (chip_mode * 8));
+	case 1:
+		;
+	}
+
+	/* And finally, for the multi-word case, replicate it
+	   in all words in the structure */
+	for (i=0; i < words_per_bus; i++) {
+		val.x[i] = onecmd;
+	}
+
+	return val;
+}
+#define CMD(x)  cfi_build_cmd((x), map, cfi)
+
+
+static inline unsigned long cfi_merge_status(map_word val, struct map_info *map,
+					   struct cfi_private *cfi)
+{
+	int wordwidth, words_per_bus, chip_mode, chips_per_word;
+	unsigned long onestat, res = 0;
+	int i;
+
+	/* We do it this way to give the compiler a fighting chance
+	   of optimising away all the crap for 'bankwidth' larger than
+	   an unsigned long, in the common case where that support is
+	   disabled */
+	if (map_bankwidth_is_large(map)) {
+		wordwidth = sizeof(unsigned long);
+		words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1
+	} else {
+		wordwidth = map_bankwidth(map);
+		words_per_bus = 1;
+	}
+
+	chip_mode = map_bankwidth(map) / cfi_interleave(cfi);
+	chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map);
+
+	onestat = val.x[0];
+	/* Or all status words together */
+	for (i=1; i < words_per_bus; i++) {
+		onestat |= val.x[i];
+	}
+
+	res = onestat;
+	switch(chips_per_word) {
+	default: BUG();
+#if BITS_PER_LONG >= 64
+	case 8:
+		res |= (onestat >> (chip_mode * 32));
+#endif
+	case 4:
+		res |= (onestat >> (chip_mode * 16));
+	case 2:
+		res |= (onestat >> (chip_mode * 8));
+	case 1:
+		;
+	}
+
+	/* Last, determine what the bit-pattern should be for a single
+	   device, according to chip mode and endianness... */
+	switch (chip_mode) {
+	case 1:
+		break;
+	case 2:
+		res = cfi16_to_cpu(map, res);
+		break;
+	case 4:
+		res = cfi32_to_cpu(map, res);
+		break;
+	default: BUG();
+	}
+	return res;
+}
+
+#define MERGESTATUS(x) cfi_merge_status((x), map, cfi)
+
+
+/*
+ * Sends a CFI command to a bank of flash for the given geometry.
+ *
+ * Returns the offset in flash where the command was written.
+ * If prev_val is non-null, it will be set to the value at the command address,
+ * before the command was written.
+ */
+static inline uint32_t cfi_send_gen_cmd(u_char cmd, uint32_t cmd_addr, uint32_t base,
+				struct map_info *map, struct cfi_private *cfi,
+				int type, map_word *prev_val)
+{
+	map_word val;
+	uint32_t addr = base + cfi_build_cmd_addr(cmd_addr, map, cfi);
+	val = cfi_build_cmd(cmd, map, cfi);
+
+	if (prev_val)
+		*prev_val = map_read(map, addr);
+
+	map_write(map, val, addr);
+
+	return addr - base;
+}
+
+static inline uint8_t cfi_read_query(struct map_info *map, uint32_t addr)
+{
+	map_word val = map_read(map, addr);
+
+	if (map_bankwidth_is_1(map)) {
+		return val.x[0];
+	} else if (map_bankwidth_is_2(map)) {
+		return cfi16_to_cpu(map, val.x[0]);
+	} else {
+		/* No point in a 64-bit byteswap since that would just be
+		   swapping the responses from different chips, and we are
+		   only interested in one chip (a representative sample) */
+		return cfi32_to_cpu(map, val.x[0]);
+	}
+}
+
+static inline uint16_t cfi_read_query16(struct map_info *map, uint32_t addr)
+{
+	map_word val = map_read(map, addr);
+
+	if (map_bankwidth_is_1(map)) {
+		return val.x[0] & 0xff;
+	} else if (map_bankwidth_is_2(map)) {
+		return cfi16_to_cpu(map, val.x[0]);
+	} else {
+		/* No point in a 64-bit byteswap since that would just be
+		   swapping the responses from different chips, and we are
+		   only interested in one chip (a representative sample) */
+		return cfi32_to_cpu(map, val.x[0]);
+	}
+}
+
+static inline void cfi_udelay(int us)
+{
+	if (us >= 1000) {
+		msleep((us+999)/1000);
+	} else {
+		udelay(us);
+		cond_resched();
+	}
+}
+
+int __xipram cfi_qry_present(struct map_info *map, __u32 base,
+			     struct cfi_private *cfi);
+int __xipram cfi_qry_mode_on(uint32_t base, struct map_info *map,
+			     struct cfi_private *cfi);
+void __xipram cfi_qry_mode_off(uint32_t base, struct map_info *map,
+			       struct cfi_private *cfi);
+
+struct cfi_extquery *cfi_read_pri(struct map_info *map, uint16_t adr, uint16_t size,
+			     const char* name);
+struct cfi_fixup {
+	uint16_t mfr;
+	uint16_t id;
+	void (*fixup)(struct mtd_info *mtd);
+};
+
+#define CFI_MFR_ANY		0xFFFF
+#define CFI_ID_ANY		0xFFFF
+#define CFI_MFR_CONTINUATION	0x007F
+
+#define CFI_MFR_AMD		0x0001
+#define CFI_MFR_AMIC		0x0037
+#define CFI_MFR_ATMEL		0x001F
+#define CFI_MFR_EON		0x001C
+#define CFI_MFR_FUJITSU		0x0004
+#define CFI_MFR_HYUNDAI		0x00AD
+#define CFI_MFR_INTEL		0x0089
+#define CFI_MFR_MACRONIX	0x00C2
+#define CFI_MFR_NEC		0x0010
+#define CFI_MFR_PMC		0x009D
+#define CFI_MFR_SAMSUNG		0x00EC
+#define CFI_MFR_SHARP		0x00B0
+#define CFI_MFR_SST		0x00BF
+#define CFI_MFR_ST		0x0020 /* STMicroelectronics */
+#define CFI_MFR_TOSHIBA		0x0098
+#define CFI_MFR_WINBOND		0x00DA
+
+void cfi_fixup(struct mtd_info *mtd, struct cfi_fixup* fixups);
+
+typedef int (*varsize_frob_t)(struct map_info *map, struct flchip *chip,
+			      unsigned long adr, int len, void *thunk);
+
+int cfi_varsize_frob(struct mtd_info *mtd, varsize_frob_t frob,
+	loff_t ofs, size_t len, void *thunk);
+
+
+#endif /* __MTD_CFI_H__ */
diff --git a/include/linux/mtd/cfi_endian.h b/include/linux/mtd/cfi_endian.h
new file mode 100644
index 00000000..b97a6250
--- /dev/null
+++ b/include/linux/mtd/cfi_endian.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright © 2001-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <asm/byteorder.h>
+
+#define CFI_HOST_ENDIAN 1
+#define CFI_LITTLE_ENDIAN 2
+#define CFI_BIG_ENDIAN 3
+
+#if !defined(CONFIG_MTD_CFI_ADV_OPTIONS) || defined(CONFIG_MTD_CFI_NOSWAP)
+#define CFI_DEFAULT_ENDIAN CFI_HOST_ENDIAN
+#elif defined(CONFIG_MTD_CFI_LE_BYTE_SWAP)
+#define CFI_DEFAULT_ENDIAN CFI_LITTLE_ENDIAN
+#elif defined(CONFIG_MTD_CFI_BE_BYTE_SWAP)
+#define CFI_DEFAULT_ENDIAN CFI_BIG_ENDIAN
+#else
+#error No CFI endianness defined
+#endif
+
+#define cfi_default(s) ((s)?:CFI_DEFAULT_ENDIAN)
+#define cfi_be(s) (cfi_default(s) == CFI_BIG_ENDIAN)
+#define cfi_le(s) (cfi_default(s) == CFI_LITTLE_ENDIAN)
+#define cfi_host(s) (cfi_default(s) == CFI_HOST_ENDIAN)
+
+#define cpu_to_cfi8(map, x) (x)
+#define cfi8_to_cpu(map, x) (x)
+#define cpu_to_cfi16(map, x) _cpu_to_cfi(16, (map)->swap, (x))
+#define cpu_to_cfi32(map, x) _cpu_to_cfi(32, (map)->swap, (x))
+#define cpu_to_cfi64(map, x) _cpu_to_cfi(64, (map)->swap, (x))
+#define cfi16_to_cpu(map, x) _cfi_to_cpu(16, (map)->swap, (x))
+#define cfi32_to_cpu(map, x) _cfi_to_cpu(32, (map)->swap, (x))
+#define cfi64_to_cpu(map, x) _cfi_to_cpu(64, (map)->swap, (x))
+
+#define _cpu_to_cfi(w, s, x) (cfi_host(s)?(x):_swap_to_cfi(w, s, x))
+#define _cfi_to_cpu(w, s, x) (cfi_host(s)?(x):_swap_to_cpu(w, s, x))
+#define _swap_to_cfi(w, s, x) (cfi_be(s)?cpu_to_be##w(x):cpu_to_le##w(x))
+#define _swap_to_cpu(w, s, x) (cfi_be(s)?be##w##_to_cpu(x):le##w##_to_cpu(x))
diff --git a/include/linux/mtd/concat.h b/include/linux/mtd/concat.h
new file mode 100644
index 00000000..ccdbe93a
--- /dev/null
+++ b/include/linux/mtd/concat.h
@@ -0,0 +1,34 @@
+/*
+ * MTD device concatenation layer definitions
+ *
+ * Copyright © 2002      Robert Kaiser <rkaiser@sysgo.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifndef MTD_CONCAT_H
+#define MTD_CONCAT_H
+
+
+struct mtd_info *mtd_concat_create(
+    struct mtd_info *subdev[],  /* subdevices to concatenate */
+    int num_devs,               /* number of subdevices      */
+    const char *name);          /* name for the new device   */
+
+void mtd_concat_destroy(struct mtd_info *mtd);
+
+#endif
+
diff --git a/include/linux/mtd/doc2000.h b/include/linux/mtd/doc2000.h
new file mode 100644
index 00000000..0f6fea73
--- /dev/null
+++ b/include/linux/mtd/doc2000.h
@@ -0,0 +1,206 @@
+/*
+ * Linux driver for Disk-On-Chip devices
+ *
+ * Copyright © 1999 Machine Vision Holdings, Inc.
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 2002-2003 Greg Ungerer <gerg@snapgear.com>
+ * Copyright © 2002-2003 SnapGear Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifndef __MTD_DOC2000_H__
+#define __MTD_DOC2000_H__
+
+#include <linux/mtd/mtd.h>
+#include <linux/mutex.h>
+
+#define DoC_Sig1 0
+#define DoC_Sig2 1
+
+#define DoC_ChipID		0x1000
+#define DoC_DOCStatus		0x1001
+#define DoC_DOCControl		0x1002
+#define DoC_FloorSelect		0x1003
+#define DoC_CDSNControl		0x1004
+#define DoC_CDSNDeviceSelect 	0x1005
+#define DoC_ECCConf 		0x1006
+#define DoC_2k_ECCStatus	0x1007
+
+#define DoC_CDSNSlowIO		0x100d
+#define DoC_ECCSyndrome0	0x1010
+#define DoC_ECCSyndrome1	0x1011
+#define DoC_ECCSyndrome2	0x1012
+#define DoC_ECCSyndrome3	0x1013
+#define DoC_ECCSyndrome4	0x1014
+#define DoC_ECCSyndrome5	0x1015
+#define DoC_AliasResolution 	0x101b
+#define DoC_ConfigInput		0x101c
+#define DoC_ReadPipeInit 	0x101d
+#define DoC_WritePipeTerm 	0x101e
+#define DoC_LastDataRead 	0x101f
+#define DoC_NOP 		0x1020
+
+#define DoC_Mil_CDSN_IO 	0x0800
+#define DoC_2k_CDSN_IO 		0x1800
+
+#define DoC_Mplus_NOP			0x1002
+#define DoC_Mplus_AliasResolution	0x1004
+#define DoC_Mplus_DOCControl		0x1006
+#define DoC_Mplus_AccessStatus		0x1008
+#define DoC_Mplus_DeviceSelect		0x1008
+#define DoC_Mplus_Configuration		0x100a
+#define DoC_Mplus_OutputControl		0x100c
+#define DoC_Mplus_FlashControl		0x1020
+#define DoC_Mplus_FlashSelect 		0x1022
+#define DoC_Mplus_FlashCmd		0x1024
+#define DoC_Mplus_FlashAddress		0x1026
+#define DoC_Mplus_FlashData0		0x1028
+#define DoC_Mplus_FlashData1		0x1029
+#define DoC_Mplus_ReadPipeInit		0x102a
+#define DoC_Mplus_LastDataRead		0x102c
+#define DoC_Mplus_LastDataRead1		0x102d
+#define DoC_Mplus_WritePipeTerm 	0x102e
+#define DoC_Mplus_ECCSyndrome0		0x1040
+#define DoC_Mplus_ECCSyndrome1		0x1041
+#define DoC_Mplus_ECCSyndrome2		0x1042
+#define DoC_Mplus_ECCSyndrome3		0x1043
+#define DoC_Mplus_ECCSyndrome4		0x1044
+#define DoC_Mplus_ECCSyndrome5		0x1045
+#define DoC_Mplus_ECCConf 		0x1046
+#define DoC_Mplus_Toggle		0x1046
+#define DoC_Mplus_DownloadStatus	0x1074
+#define DoC_Mplus_CtrlConfirm		0x1076
+#define DoC_Mplus_Power			0x1fff
+
+/* How to access the device?
+ * On ARM, it'll be mmap'd directly with 32-bit wide accesses.
+ * On PPC, it's mmap'd and 16-bit wide.
+ * Others use readb/writeb
+ */
+#if defined(__arm__)
+#define ReadDOC_(adr, reg)      ((unsigned char)(*(volatile __u32 *)(((unsigned long)adr)+((reg)<<2))))
+#define WriteDOC_(d, adr, reg)  do{ *(volatile __u32 *)(((unsigned long)adr)+((reg)<<2)) = (__u32)d; wmb();} while(0)
+#define DOC_IOREMAP_LEN 0x8000
+#elif defined(__ppc__)
+#define ReadDOC_(adr, reg)      ((unsigned char)(*(volatile __u16 *)(((unsigned long)adr)+((reg)<<1))))
+#define WriteDOC_(d, adr, reg)  do{ *(volatile __u16 *)(((unsigned long)adr)+((reg)<<1)) = (__u16)d; wmb();} while(0)
+#define DOC_IOREMAP_LEN 0x4000
+#else
+#define ReadDOC_(adr, reg)      readb((void __iomem *)(adr) + (reg))
+#define WriteDOC_(d, adr, reg)  writeb(d, (void __iomem *)(adr) + (reg))
+#define DOC_IOREMAP_LEN 0x2000
+
+#endif
+
+#if defined(__i386__) || defined(__x86_64__)
+#define USE_MEMCPY
+#endif
+
+/* These are provided to directly use the DoC_xxx defines */
+#define ReadDOC(adr, reg)      ReadDOC_(adr,DoC_##reg)
+#define WriteDOC(d, adr, reg)  WriteDOC_(d,adr,DoC_##reg)
+
+#define DOC_MODE_RESET 		0
+#define DOC_MODE_NORMAL 	1
+#define DOC_MODE_RESERVED1 	2
+#define DOC_MODE_RESERVED2 	3
+
+#define DOC_MODE_CLR_ERR 	0x80
+#define	DOC_MODE_RST_LAT	0x10
+#define	DOC_MODE_BDECT		0x08
+#define DOC_MODE_MDWREN 	0x04
+
+#define DOC_ChipID_Doc2k 	0x20
+#define DOC_ChipID_Doc2kTSOP 	0x21	/* internal number for MTD */
+#define DOC_ChipID_DocMil 	0x30
+#define DOC_ChipID_DocMilPlus32	0x40
+#define DOC_ChipID_DocMilPlus16	0x41
+
+#define CDSN_CTRL_FR_B 		0x80
+#define CDSN_CTRL_FR_B0		0x40
+#define CDSN_CTRL_FR_B1		0x80
+
+#define CDSN_CTRL_ECC_IO 	0x20
+#define CDSN_CTRL_FLASH_IO 	0x10
+#define CDSN_CTRL_WP 		0x08
+#define CDSN_CTRL_ALE 		0x04
+#define CDSN_CTRL_CLE 		0x02
+#define CDSN_CTRL_CE 		0x01
+
+#define DOC_ECC_RESET 		0
+#define DOC_ECC_ERROR 		0x80
+#define DOC_ECC_RW 		0x20
+#define DOC_ECC__EN 		0x08
+#define DOC_TOGGLE_BIT 		0x04
+#define DOC_ECC_RESV 		0x02
+#define DOC_ECC_IGNORE		0x01
+
+#define DOC_FLASH_CE		0x80
+#define DOC_FLASH_WP		0x40
+#define DOC_FLASH_BANK		0x02
+
+/* We have to also set the reserved bit 1 for enable */
+#define DOC_ECC_EN (DOC_ECC__EN | DOC_ECC_RESV)
+#define DOC_ECC_DIS (DOC_ECC_RESV)
+
+struct Nand {
+	char floor, chip;
+	unsigned long curadr;
+	unsigned char curmode;
+	/* Also some erase/write/pipeline info when we get that far */
+};
+
+#define MAX_FLOORS 4
+#define MAX_CHIPS 4
+
+#define MAX_FLOORS_MIL 1
+#define MAX_CHIPS_MIL 1
+
+#define MAX_FLOORS_MPLUS 2
+#define MAX_CHIPS_MPLUS 1
+
+#define ADDR_COLUMN 1
+#define ADDR_PAGE 2
+#define ADDR_COLUMN_PAGE 3
+
+struct DiskOnChip {
+	unsigned long physadr;
+	void __iomem *virtadr;
+	unsigned long totlen;
+	unsigned char ChipID; /* Type of DiskOnChip */
+	int ioreg;
+
+	unsigned long mfr; /* Flash IDs - only one type of flash per device */
+	unsigned long id;
+	int chipshift;
+	char page256;
+	char pageadrlen;
+	char interleave; /* Internal interleaving - Millennium Plus style */
+	unsigned long erasesize;
+
+	int curfloor;
+	int curchip;
+
+	int numchips;
+	struct Nand *chips;
+	struct mtd_info *nextdoc;
+	struct mutex lock;
+};
+
+int doc_decode_ecc(unsigned char sector[512], unsigned char ecc1[6]);
+
+#endif /* __MTD_DOC2000_H__ */
diff --git a/include/linux/mtd/flashchip.h b/include/linux/mtd/flashchip.h
new file mode 100644
index 00000000..b63fa457
--- /dev/null
+++ b/include/linux/mtd/flashchip.h
@@ -0,0 +1,112 @@
+/*
+ * Copyright © 2000      Red Hat UK Limited
+ * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifndef __MTD_FLASHCHIP_H__
+#define __MTD_FLASHCHIP_H__
+
+/* For spinlocks. sched.h includes spinlock.h from whichever directory it
+ * happens to be in - so we don't have to care whether we're on 2.2, which
+ * has asm/spinlock.h, or 2.4, which has linux/spinlock.h
+ */
+#include <linux/sched.h>
+#include <linux/mutex.h>
+
+typedef enum {
+	FL_READY,
+	FL_STATUS,
+	FL_CFI_QUERY,
+	FL_JEDEC_QUERY,
+	FL_ERASING,
+	FL_ERASE_SUSPENDING,
+	FL_ERASE_SUSPENDED,
+	FL_WRITING,
+	FL_WRITING_TO_BUFFER,
+	FL_OTP_WRITE,
+	FL_WRITE_SUSPENDING,
+	FL_WRITE_SUSPENDED,
+	FL_PM_SUSPENDED,
+	FL_SYNCING,
+	FL_UNLOADING,
+	FL_LOCKING,
+	FL_UNLOCKING,
+	FL_POINT,
+	FL_XIP_WHILE_ERASING,
+	FL_XIP_WHILE_WRITING,
+	FL_SHUTDOWN,
+	/* These 2 come from nand_state_t, which has been unified here */
+	FL_READING,
+	FL_CACHEDPRG,
+	/* These 4 come from onenand_state_t, which has been unified here */
+	FL_RESETING,
+	FL_OTPING,
+	FL_PREPARING_ERASE,
+	FL_VERIFYING_ERASE,
+
+	FL_UNKNOWN
+} flstate_t;
+
+
+
+/* NOTE: confusingly, this can be used to refer to more than one chip at a time,
+   if they're interleaved.  This can even refer to individual partitions on
+   the same physical chip when present. */
+
+struct flchip {
+	unsigned long start; /* Offset within the map */
+	//	unsigned long len;
+	/* We omit len for now, because when we group them together
+	   we insist that they're all of the same size, and the chip size
+	   is held in the next level up. If we get more versatile later,
+	   it'll make it a damn sight harder to find which chip we want from
+	   a given offset, and we'll want to add the per-chip length field
+	   back in.
+	*/
+	int ref_point_counter;
+	flstate_t state;
+	flstate_t oldstate;
+
+	unsigned int write_suspended:1;
+	unsigned int erase_suspended:1;
+	unsigned long in_progress_block_addr;
+
+	struct mutex mutex;
+	wait_queue_head_t wq; /* Wait on here when we're waiting for the chip
+			     to be ready */
+	int word_write_time;
+	int buffer_write_time;
+	int erase_time;
+
+	int word_write_time_max;
+	int buffer_write_time_max;
+	int erase_time_max;
+
+	void *priv;
+};
+
+/* This is used to handle contention on write/erase operations
+   between partitions of the same physical chip. */
+struct flchip_shared {
+	struct mutex lock;
+	struct flchip *writing;
+	struct flchip *erasing;
+};
+
+
+#endif /* __MTD_FLASHCHIP_H__ */
diff --git a/include/linux/mtd/fsmc.h b/include/linux/mtd/fsmc.h
new file mode 100644
index 00000000..b2002922
--- /dev/null
+++ b/include/linux/mtd/fsmc.h
@@ -0,0 +1,176 @@
+/*
+ * incude/mtd/fsmc.h
+ *
+ * ST Microelectronics
+ * Flexible Static Memory Controller (FSMC)
+ * platform data interface and header file
+ *
+ * Copyright © 2010 ST Microelectronics
+ * Vipin Kumar <vipin.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MTD_FSMC_H
+#define __MTD_FSMC_H
+
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/types.h>
+#include <linux/mtd/partitions.h>
+#include <asm/param.h>
+
+#define FSMC_NAND_BW8		1
+#define FSMC_NAND_BW16		2
+
+#define FSMC_MAX_NOR_BANKS	4
+#define FSMC_MAX_NAND_BANKS	4
+
+#define FSMC_FLASH_WIDTH8	1
+#define FSMC_FLASH_WIDTH16	2
+
+/* fsmc controller registers for NOR flash */
+#define CTRL			0x0
+	/* ctrl register definitions */
+	#define BANK_ENABLE		(1 << 0)
+	#define MUXED			(1 << 1)
+	#define NOR_DEV			(2 << 2)
+	#define WIDTH_8			(0 << 4)
+	#define WIDTH_16		(1 << 4)
+	#define RSTPWRDWN		(1 << 6)
+	#define WPROT			(1 << 7)
+	#define WRT_ENABLE		(1 << 12)
+	#define WAIT_ENB		(1 << 13)
+
+#define CTRL_TIM		0x4
+	/* ctrl_tim register definitions */
+
+#define FSMC_NOR_BANK_SZ	0x8
+#define FSMC_NOR_REG_SIZE	0x40
+
+#define FSMC_NOR_REG(base, bank, reg)		(base + \
+						FSMC_NOR_BANK_SZ * (bank) + \
+						reg)
+
+/* fsmc controller registers for NAND flash */
+#define PC			0x00
+	/* pc register definitions */
+	#define FSMC_RESET		(1 << 0)
+	#define FSMC_WAITON		(1 << 1)
+	#define FSMC_ENABLE		(1 << 2)
+	#define FSMC_DEVTYPE_NAND	(1 << 3)
+	#define FSMC_DEVWID_8		(0 << 4)
+	#define FSMC_DEVWID_16		(1 << 4)
+	#define FSMC_ECCEN		(1 << 6)
+	#define FSMC_ECCPLEN_512	(0 << 7)
+	#define FSMC_ECCPLEN_256	(1 << 7)
+	#define FSMC_TCLR_1		(1)
+	#define FSMC_TCLR_SHIFT		(9)
+	#define FSMC_TCLR_MASK		(0xF)
+	#define FSMC_TAR_1		(1)
+	#define FSMC_TAR_SHIFT		(13)
+	#define FSMC_TAR_MASK		(0xF)
+#define STS			0x04
+	/* sts register definitions */
+	#define FSMC_CODE_RDY		(1 << 15)
+#define COMM			0x08
+	/* comm register definitions */
+	#define FSMC_TSET_0		0
+	#define FSMC_TSET_SHIFT		0
+	#define FSMC_TSET_MASK		0xFF
+	#define FSMC_TWAIT_6		6
+	#define FSMC_TWAIT_SHIFT	8
+	#define FSMC_TWAIT_MASK		0xFF
+	#define FSMC_THOLD_4		4
+	#define FSMC_THOLD_SHIFT	16
+	#define FSMC_THOLD_MASK		0xFF
+	#define FSMC_THIZ_1		1
+	#define FSMC_THIZ_SHIFT		24
+	#define FSMC_THIZ_MASK		0xFF
+#define ATTRIB			0x0C
+#define IOATA			0x10
+#define ECC1			0x14
+#define ECC2			0x18
+#define ECC3			0x1C
+#define FSMC_NAND_BANK_SZ	0x20
+
+#define FSMC_NAND_REG(base, bank, reg)		(base + FSMC_NOR_REG_SIZE + \
+						(FSMC_NAND_BANK_SZ * (bank)) + \
+						reg)
+
+#define FSMC_BUSY_WAIT_TIMEOUT	(1 * HZ)
+
+/*
+ * There are 13 bytes of ecc for every 512 byte block in FSMC version 8
+ * and it has to be read consecutively and immediately after the 512
+ * byte data block for hardware to generate the error bit offsets
+ * Managing the ecc bytes in the following way is easier. This way is
+ * similar to oobfree structure maintained already in u-boot nand driver
+ */
+#define MAX_ECCPLACE_ENTRIES	32
+
+struct fsmc_nand_eccplace {
+	uint8_t offset;
+	uint8_t length;
+};
+
+struct fsmc_eccplace {
+	struct fsmc_nand_eccplace eccplace[MAX_ECCPLACE_ENTRIES];
+};
+
+struct fsmc_nand_timings {
+	uint8_t tclr;
+	uint8_t tar;
+	uint8_t thiz;
+	uint8_t thold;
+	uint8_t twait;
+	uint8_t tset;
+};
+
+enum access_mode {
+	USE_DMA_ACCESS = 1,
+	USE_WORD_ACCESS,
+};
+
+/**
+ * fsmc_nand_platform_data - platform specific NAND controller config
+ * @partitions: partition table for the platform, use a default fallback
+ * if this is NULL
+ * @nr_partitions: the number of partitions in the previous entry
+ * @options: different options for the driver
+ * @width: bus width
+ * @bank: default bank
+ * @select_bank: callback to select a certain bank, this is
+ * platform-specific. If the controller only supports one bank
+ * this may be set to NULL
+ */
+struct fsmc_nand_platform_data {
+	struct fsmc_nand_timings *nand_timings;
+	struct mtd_partition	*partitions;
+	unsigned int		nr_partitions;
+	unsigned int		options;
+	unsigned int		width;
+	unsigned int		bank;
+
+	/* CLE, ALE offsets */
+	unsigned int		cle_off;
+	unsigned int		ale_off;
+	enum access_mode	mode;
+
+	void			(*select_bank)(uint32_t bank, uint32_t busw);
+
+	/* priv structures for dma accesses */
+	void			*read_dma_priv;
+	void			*write_dma_priv;
+};
+
+extern int __init fsmc_nor_init(struct platform_device *pdev,
+		unsigned long base, uint32_t bank, uint32_t width);
+extern void __init fsmc_init_board_info(struct platform_device *pdev,
+		struct mtd_partition *partitions, unsigned int nr_partitions,
+		unsigned int width);
+
+#endif /* __MTD_FSMC_H */
diff --git a/include/linux/mtd/ftl.h b/include/linux/mtd/ftl.h
new file mode 100644
index 00000000..0555f7a0
--- /dev/null
+++ b/include/linux/mtd/ftl.h
@@ -0,0 +1,74 @@
+/*
+ * Derived from (and probably identical to):
+ * ftl.h 1.7 1999/10/25 20:23:17
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * The initial developer of the original code is David A. Hinds
+ * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
+ * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above.  If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use
+ * your version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL.  If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+ */
+
+#ifndef _LINUX_FTL_H
+#define _LINUX_FTL_H
+
+typedef struct erase_unit_header_t {
+    uint8_t	LinkTargetTuple[5];
+    uint8_t	DataOrgTuple[10];
+    uint8_t	NumTransferUnits;
+    uint32_t	EraseCount;
+    uint16_t	LogicalEUN;
+    uint8_t	BlockSize;
+    uint8_t	EraseUnitSize;
+    uint16_t	FirstPhysicalEUN;
+    uint16_t	NumEraseUnits;
+    uint32_t	FormattedSize;
+    uint32_t	FirstVMAddress;
+    uint16_t	NumVMPages;
+    uint8_t	Flags;
+    uint8_t	Code;
+    uint32_t	SerialNumber;
+    uint32_t	AltEUHOffset;
+    uint32_t	BAMOffset;
+    uint8_t	Reserved[12];
+    uint8_t	EndTuple[2];
+} erase_unit_header_t;
+
+/* Flags in erase_unit_header_t */
+#define HIDDEN_AREA		0x01
+#define REVERSE_POLARITY	0x02
+#define DOUBLE_BAI		0x04
+
+/* Definitions for block allocation information */
+
+#define BLOCK_FREE(b)		((b) == 0xffffffff)
+#define BLOCK_DELETED(b)	(((b) == 0) || ((b) == 0xfffffffe))
+
+#define BLOCK_TYPE(b)		((b) & 0x7f)
+#define BLOCK_ADDRESS(b)	((b) & ~0x7f)
+#define BLOCK_NUMBER(b)		((b) >> 9)
+#define BLOCK_CONTROL		0x30
+#define BLOCK_DATA		0x40
+#define BLOCK_REPLACEMENT	0x60
+#define BLOCK_BAD		0x70
+
+#endif /* _LINUX_FTL_H */
diff --git a/include/linux/mtd/gen_probe.h b/include/linux/mtd/gen_probe.h
new file mode 100644
index 00000000..2c456054
--- /dev/null
+++ b/include/linux/mtd/gen_probe.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright © 2001      Red Hat UK Limited
+ * Copyright © 2001-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifndef __LINUX_MTD_GEN_PROBE_H__
+#define __LINUX_MTD_GEN_PROBE_H__
+
+#include <linux/mtd/flashchip.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/cfi.h>
+#include <linux/bitops.h>
+
+struct chip_probe {
+	char *name;
+	int (*probe_chip)(struct map_info *map, __u32 base,
+			  unsigned long *chip_map, struct cfi_private *cfi);
+};
+
+struct mtd_info *mtd_do_chip_probe(struct map_info *map, struct chip_probe *cp);
+
+#endif /* __LINUX_MTD_GEN_PROBE_H__ */
diff --git a/include/linux/mtd/gpmi-nand.h b/include/linux/mtd/gpmi-nand.h
new file mode 100644
index 00000000..69b6dbf4
--- /dev/null
+++ b/include/linux/mtd/gpmi-nand.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __MACH_MXS_GPMI_NAND_H__
+#define __MACH_MXS_GPMI_NAND_H__
+
+/* The size of the resources is fixed. */
+#define GPMI_NAND_RES_SIZE	6
+
+/* Resource names for the GPMI NAND driver. */
+#define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME  "GPMI NAND GPMI Registers"
+#define GPMI_NAND_GPMI_INTERRUPT_RES_NAME  "GPMI NAND GPMI Interrupt"
+#define GPMI_NAND_BCH_REGS_ADDR_RES_NAME   "GPMI NAND BCH Registers"
+#define GPMI_NAND_BCH_INTERRUPT_RES_NAME   "GPMI NAND BCH Interrupt"
+#define GPMI_NAND_DMA_CHANNELS_RES_NAME    "GPMI NAND DMA Channels"
+#define GPMI_NAND_DMA_INTERRUPT_RES_NAME   "GPMI NAND DMA Interrupt"
+
+/**
+ * struct gpmi_nand_platform_data - GPMI NAND driver platform data.
+ *
+ * This structure communicates platform-specific information to the GPMI NAND
+ * driver that can't be expressed as resources.
+ *
+ * @platform_init:           A pointer to a function the driver will call to
+ *                           initialize the platform (e.g., set up the pin mux).
+ * @min_prop_delay_in_ns:    Minimum propagation delay of GPMI signals to and
+ *                           from the NAND Flash device, in nanoseconds.
+ * @max_prop_delay_in_ns:    Maximum propagation delay of GPMI signals to and
+ *                           from the NAND Flash device, in nanoseconds.
+ * @max_chip_count:          The maximum number of chips for which the driver
+ *                           should configure the hardware. This value most
+ *                           likely reflects the number of pins that are
+ *                           connected to a NAND Flash device. If this is
+ *                           greater than the SoC hardware can support, the
+ *                           driver will print a message and fail to initialize.
+ * @partitions:              An optional pointer to an array of partition
+ *                           descriptions.
+ * @partition_count:         The number of elements in the partitions array.
+ */
+struct gpmi_nand_platform_data {
+	/* SoC hardware information. */
+	int		(*platform_init)(void);
+
+	/* NAND Flash information. */
+	unsigned int	min_prop_delay_in_ns;
+	unsigned int	max_prop_delay_in_ns;
+	unsigned int	max_chip_count;
+
+	/* Medium information. */
+	struct		mtd_partition *partitions;
+	unsigned	partition_count;
+};
+#endif
diff --git a/include/linux/mtd/inftl.h b/include/linux/mtd/inftl.h
new file mode 100644
index 00000000..02cd5f9b
--- /dev/null
+++ b/include/linux/mtd/inftl.h
@@ -0,0 +1,63 @@
+/*
+ *	inftl.h -- defines to support the Inverse NAND Flash Translation Layer
+ *
+ *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ */
+
+#ifndef __MTD_INFTL_H__
+#define __MTD_INFTL_H__
+
+#ifndef __KERNEL__
+#error This is a kernel header. Perhaps include nftl-user.h instead?
+#endif
+
+#include <linux/mtd/blktrans.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nftl.h>
+
+#include <mtd/inftl-user.h>
+
+#ifndef INFTL_MAJOR
+#define INFTL_MAJOR 96
+#endif
+#define INFTL_PARTN_BITS 4
+
+#ifdef __KERNEL__
+
+struct INFTLrecord {
+	struct mtd_blktrans_dev mbd;
+	__u16 MediaUnit;
+	__u32 EraseSize;
+	struct INFTLMediaHeader MediaHdr;
+	int usecount;
+	unsigned char heads;
+	unsigned char sectors;
+	unsigned short cylinders;
+	__u16 numvunits;
+	__u16 firstEUN;
+	__u16 lastEUN;
+	__u16 numfreeEUNs;
+	__u16 LastFreeEUN;		/* To speed up finding a free EUN */
+	int head,sect,cyl;
+	__u16 *PUtable;			/* Physical Unit Table */
+	__u16 *VUtable;			/* Virtual Unit Table */
+	unsigned int nb_blocks;		/* number of physical blocks */
+	unsigned int nb_boot_blocks;	/* number of blocks used by the bios */
+	struct erase_info instr;
+	struct nand_ecclayout oobinfo;
+};
+
+int INFTL_mount(struct INFTLrecord *s);
+int INFTL_formatblock(struct INFTLrecord *s, int block);
+
+void INFTL_dumptables(struct INFTLrecord *s);
+void INFTL_dumpVUchains(struct INFTLrecord *s);
+
+int inftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len,
+		   size_t *retlen, uint8_t *buf);
+int inftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len,
+		    size_t *retlen, uint8_t *buf);
+
+#endif /* __KERNEL__ */
+
+#endif /* __MTD_INFTL_H__ */
diff --git a/include/linux/mtd/latch-addr-flash.h b/include/linux/mtd/latch-addr-flash.h
new file mode 100644
index 00000000..e94b8e12
--- /dev/null
+++ b/include/linux/mtd/latch-addr-flash.h
@@ -0,0 +1,29 @@
+/*
+ * Interface for NOR flash driver whose high address lines are latched
+ *
+ * Copyright © 2008 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#ifndef __LATCH_ADDR_FLASH__
+#define __LATCH_ADDR_FLASH__
+
+struct map_info;
+struct mtd_partition;
+
+struct latch_addr_flash_data {
+	unsigned int		width;
+	unsigned int		size;
+
+	int			(*init)(void *data, int cs);
+	void			(*done)(void *data);
+	void			(*set_window)(unsigned long offset, void *data);
+	void			*data;
+
+	unsigned int		nr_parts;
+	struct mtd_partition	*parts;
+};
+
+#endif
diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h
new file mode 100644
index 00000000..3595a023
--- /dev/null
+++ b/include/linux/mtd/map.h
@@ -0,0 +1,465 @@
+/*
+ * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org> et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+/* Overhauled routines for dealing with different mmap regions of flash */
+
+#ifndef __LINUX_MTD_MAP_H__
+#define __LINUX_MTD_MAP_H__
+
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/string.h>
+#include <linux/bug.h>
+#include <linux/kernel.h>
+
+#include <asm/unaligned.h>
+#include <asm/io.h>
+#include <asm/barrier.h>
+
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_1
+#define map_bankwidth(map) 1
+#define map_bankwidth_is_1(map) (map_bankwidth(map) == 1)
+#define map_bankwidth_is_large(map) (0)
+#define map_words(map) (1)
+#define MAX_MAP_BANKWIDTH 1
+#else
+#define map_bankwidth_is_1(map) (0)
+#endif
+
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_2
+# ifdef map_bankwidth
+#  undef map_bankwidth
+#  define map_bankwidth(map) ((map)->bankwidth)
+# else
+#  define map_bankwidth(map) 2
+#  define map_bankwidth_is_large(map) (0)
+#  define map_words(map) (1)
+# endif
+#define map_bankwidth_is_2(map) (map_bankwidth(map) == 2)
+#undef MAX_MAP_BANKWIDTH
+#define MAX_MAP_BANKWIDTH 2
+#else
+#define map_bankwidth_is_2(map) (0)
+#endif
+
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_4
+# ifdef map_bankwidth
+#  undef map_bankwidth
+#  define map_bankwidth(map) ((map)->bankwidth)
+# else
+#  define map_bankwidth(map) 4
+#  define map_bankwidth_is_large(map) (0)
+#  define map_words(map) (1)
+# endif
+#define map_bankwidth_is_4(map) (map_bankwidth(map) == 4)
+#undef MAX_MAP_BANKWIDTH
+#define MAX_MAP_BANKWIDTH 4
+#else
+#define map_bankwidth_is_4(map) (0)
+#endif
+
+/* ensure we never evaluate anything shorted than an unsigned long
+ * to zero, and ensure we'll never miss the end of an comparison (bjd) */
+
+#define map_calc_words(map) ((map_bankwidth(map) + (sizeof(unsigned long)-1))/ sizeof(unsigned long))
+
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_8
+# ifdef map_bankwidth
+#  undef map_bankwidth
+#  define map_bankwidth(map) ((map)->bankwidth)
+#  if BITS_PER_LONG < 64
+#   undef map_bankwidth_is_large
+#   define map_bankwidth_is_large(map) (map_bankwidth(map) > BITS_PER_LONG/8)
+#   undef map_words
+#   define map_words(map) map_calc_words(map)
+#  endif
+# else
+#  define map_bankwidth(map) 8
+#  define map_bankwidth_is_large(map) (BITS_PER_LONG < 64)
+#  define map_words(map) map_calc_words(map)
+# endif
+#define map_bankwidth_is_8(map) (map_bankwidth(map) == 8)
+#undef MAX_MAP_BANKWIDTH
+#define MAX_MAP_BANKWIDTH 8
+#else
+#define map_bankwidth_is_8(map) (0)
+#endif
+
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_16
+# ifdef map_bankwidth
+#  undef map_bankwidth
+#  define map_bankwidth(map) ((map)->bankwidth)
+#  undef map_bankwidth_is_large
+#  define map_bankwidth_is_large(map) (map_bankwidth(map) > BITS_PER_LONG/8)
+#  undef map_words
+#  define map_words(map) map_calc_words(map)
+# else
+#  define map_bankwidth(map) 16
+#  define map_bankwidth_is_large(map) (1)
+#  define map_words(map) map_calc_words(map)
+# endif
+#define map_bankwidth_is_16(map) (map_bankwidth(map) == 16)
+#undef MAX_MAP_BANKWIDTH
+#define MAX_MAP_BANKWIDTH 16
+#else
+#define map_bankwidth_is_16(map) (0)
+#endif
+
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_32
+# ifdef map_bankwidth
+#  undef map_bankwidth
+#  define map_bankwidth(map) ((map)->bankwidth)
+#  undef map_bankwidth_is_large
+#  define map_bankwidth_is_large(map) (map_bankwidth(map) > BITS_PER_LONG/8)
+#  undef map_words
+#  define map_words(map) map_calc_words(map)
+# else
+#  define map_bankwidth(map) 32
+#  define map_bankwidth_is_large(map) (1)
+#  define map_words(map) map_calc_words(map)
+# endif
+#define map_bankwidth_is_32(map) (map_bankwidth(map) == 32)
+#undef MAX_MAP_BANKWIDTH
+#define MAX_MAP_BANKWIDTH 32
+#else
+#define map_bankwidth_is_32(map) (0)
+#endif
+
+#ifndef map_bankwidth
+#warning "No CONFIG_MTD_MAP_BANK_WIDTH_xx selected. No NOR chip support can work"
+static inline int map_bankwidth(void *map)
+{
+	BUG();
+	return 0;
+}
+#define map_bankwidth_is_large(map) (0)
+#define map_words(map) (0)
+#define MAX_MAP_BANKWIDTH 1
+#endif
+
+static inline int map_bankwidth_supported(int w)
+{
+	switch (w) {
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_1
+	case 1:
+#endif
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_2
+	case 2:
+#endif
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_4
+	case 4:
+#endif
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_8
+	case 8:
+#endif
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_16
+	case 16:
+#endif
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_32
+	case 32:
+#endif
+		return 1;
+
+	default:
+		return 0;
+	}
+}
+
+#define MAX_MAP_LONGS ( ((MAX_MAP_BANKWIDTH*8) + BITS_PER_LONG - 1) / BITS_PER_LONG )
+
+typedef union {
+	unsigned long x[MAX_MAP_LONGS];
+} map_word;
+
+/* The map stuff is very simple. You fill in your struct map_info with
+   a handful of routines for accessing the device, making sure they handle
+   paging etc. correctly if your device needs it. Then you pass it off
+   to a chip probe routine -- either JEDEC or CFI probe or both -- via
+   do_map_probe(). If a chip is recognised, the probe code will invoke the
+   appropriate chip driver (if present) and return a struct mtd_info.
+   At which point, you fill in the mtd->module with your own module
+   address, and register it with the MTD core code. Or you could partition
+   it and register the partitions instead, or keep it for your own private
+   use; whatever.
+
+   The mtd->priv field will point to the struct map_info, and any further
+   private data required by the chip driver is linked from the
+   mtd->priv->fldrv_priv field. This allows the map driver to get at
+   the destructor function map->fldrv_destroy() when it's tired
+   of living.
+*/
+
+struct map_info {
+	const char *name;
+	unsigned long size;
+	resource_size_t phys;
+#define NO_XIP (-1UL)
+
+	void __iomem *virt;
+	void *cached;
+
+	int swap; /* this mapping's byte-swapping requirement */
+	int bankwidth; /* in octets. This isn't necessarily the width
+		       of actual bus cycles -- it's the repeat interval
+		      in bytes, before you are talking to the first chip again.
+		      */
+
+#ifdef CONFIG_MTD_COMPLEX_MAPPINGS
+	map_word (*read)(struct map_info *, unsigned long);
+	void (*copy_from)(struct map_info *, void *, unsigned long, ssize_t);
+
+	void (*write)(struct map_info *, const map_word, unsigned long);
+	void (*copy_to)(struct map_info *, unsigned long, const void *, ssize_t);
+
+	/* We can perhaps put in 'point' and 'unpoint' methods, if we really
+	   want to enable XIP for non-linear mappings. Not yet though. */
+#endif
+	/* It's possible for the map driver to use cached memory in its
+	   copy_from implementation (and _only_ with copy_from).  However,
+	   when the chip driver knows some flash area has changed contents,
+	   it will signal it to the map driver through this routine to let
+	   the map driver invalidate the corresponding cache as needed.
+	   If there is no cache to care about this can be set to NULL. */
+	void (*inval_cache)(struct map_info *, unsigned long, ssize_t);
+
+	/* set_vpp() must handle being reentered -- enable, enable, disable
+	   must leave it enabled. */
+	void (*set_vpp)(struct map_info *, int);
+
+	unsigned long pfow_base;
+	unsigned long map_priv_1;
+	unsigned long map_priv_2;
+	void *fldrv_priv;
+	struct mtd_chip_driver *fldrv;
+};
+
+struct mtd_chip_driver {
+	struct mtd_info *(*probe)(struct map_info *map);
+	void (*destroy)(struct mtd_info *);
+	struct module *module;
+	char *name;
+	struct list_head list;
+};
+
+void register_mtd_chip_driver(struct mtd_chip_driver *);
+void unregister_mtd_chip_driver(struct mtd_chip_driver *);
+
+struct mtd_info *do_map_probe(const char *name, struct map_info *map);
+void map_destroy(struct mtd_info *mtd);
+
+#define ENABLE_VPP(map) do { if(map->set_vpp) map->set_vpp(map, 1); } while(0)
+#define DISABLE_VPP(map) do { if(map->set_vpp) map->set_vpp(map, 0); } while(0)
+
+#define INVALIDATE_CACHED_RANGE(map, from, size) \
+	do { if(map->inval_cache) map->inval_cache(map, from, size); } while(0)
+
+
+static inline int map_word_equal(struct map_info *map, map_word val1, map_word val2)
+{
+	int i;
+	for (i=0; i<map_words(map); i++) {
+		if (val1.x[i] != val2.x[i])
+			return 0;
+	}
+	return 1;
+}
+
+static inline map_word map_word_and(struct map_info *map, map_word val1, map_word val2)
+{
+	map_word r;
+	int i;
+
+	for (i=0; i<map_words(map); i++) {
+		r.x[i] = val1.x[i] & val2.x[i];
+	}
+	return r;
+}
+
+static inline map_word map_word_clr(struct map_info *map, map_word val1, map_word val2)
+{
+	map_word r;
+	int i;
+
+	for (i=0; i<map_words(map); i++) {
+		r.x[i] = val1.x[i] & ~val2.x[i];
+	}
+	return r;
+}
+
+static inline map_word map_word_or(struct map_info *map, map_word val1, map_word val2)
+{
+	map_word r;
+	int i;
+
+	for (i=0; i<map_words(map); i++) {
+		r.x[i] = val1.x[i] | val2.x[i];
+	}
+	return r;
+}
+
+#define map_word_andequal(m, a, b, z) map_word_equal(m, z, map_word_and(m, a, b))
+
+static inline int map_word_bitsset(struct map_info *map, map_word val1, map_word val2)
+{
+	int i;
+
+	for (i=0; i<map_words(map); i++) {
+		if (val1.x[i] & val2.x[i])
+			return 1;
+	}
+	return 0;
+}
+
+static inline map_word map_word_load(struct map_info *map, const void *ptr)
+{
+	map_word r;
+
+	if (map_bankwidth_is_1(map))
+		r.x[0] = *(unsigned char *)ptr;
+	else if (map_bankwidth_is_2(map))
+		r.x[0] = get_unaligned((uint16_t *)ptr);
+	else if (map_bankwidth_is_4(map))
+		r.x[0] = get_unaligned((uint32_t *)ptr);
+#if BITS_PER_LONG >= 64
+	else if (map_bankwidth_is_8(map))
+		r.x[0] = get_unaligned((uint64_t *)ptr);
+#endif
+	else if (map_bankwidth_is_large(map))
+		memcpy(r.x, ptr, map->bankwidth);
+
+	return r;
+}
+
+static inline map_word map_word_load_partial(struct map_info *map, map_word orig, const unsigned char *buf, int start, int len)
+{
+	int i;
+
+	if (map_bankwidth_is_large(map)) {
+		char *dest = (char *)&orig;
+		memcpy(dest+start, buf, len);
+	} else {
+		for (i=start; i < start+len; i++) {
+			int bitpos;
+#ifdef __LITTLE_ENDIAN
+			bitpos = i*8;
+#else /* __BIG_ENDIAN */
+			bitpos = (map_bankwidth(map)-1-i)*8;
+#endif
+			orig.x[0] &= ~(0xff << bitpos);
+			orig.x[0] |= buf[i-start] << bitpos;
+		}
+	}
+	return orig;
+}
+
+#if BITS_PER_LONG < 64
+#define MAP_FF_LIMIT 4
+#else
+#define MAP_FF_LIMIT 8
+#endif
+
+static inline map_word map_word_ff(struct map_info *map)
+{
+	map_word r;
+	int i;
+
+	if (map_bankwidth(map) < MAP_FF_LIMIT) {
+		int bw = 8 * map_bankwidth(map);
+		r.x[0] = (1 << bw) - 1;
+	} else {
+		for (i=0; i<map_words(map); i++)
+			r.x[i] = ~0UL;
+	}
+	return r;
+}
+
+static inline map_word inline_map_read(struct map_info *map, unsigned long ofs)
+{
+	map_word r;
+
+	if (map_bankwidth_is_1(map))
+		r.x[0] = __raw_readb(map->virt + ofs);
+	else if (map_bankwidth_is_2(map))
+		r.x[0] = __raw_readw(map->virt + ofs);
+	else if (map_bankwidth_is_4(map))
+		r.x[0] = __raw_readl(map->virt + ofs);
+#if BITS_PER_LONG >= 64
+	else if (map_bankwidth_is_8(map))
+		r.x[0] = __raw_readq(map->virt + ofs);
+#endif
+	else if (map_bankwidth_is_large(map))
+		memcpy_fromio(r.x, map->virt+ofs, map->bankwidth);
+	else
+		BUG();
+
+	return r;
+}
+
+static inline void inline_map_write(struct map_info *map, const map_word datum, unsigned long ofs)
+{
+	if (map_bankwidth_is_1(map))
+		__raw_writeb(datum.x[0], map->virt + ofs);
+	else if (map_bankwidth_is_2(map))
+		__raw_writew(datum.x[0], map->virt + ofs);
+	else if (map_bankwidth_is_4(map))
+		__raw_writel(datum.x[0], map->virt + ofs);
+#if BITS_PER_LONG >= 64
+	else if (map_bankwidth_is_8(map))
+		__raw_writeq(datum.x[0], map->virt + ofs);
+#endif
+	else if (map_bankwidth_is_large(map))
+		memcpy_toio(map->virt+ofs, datum.x, map->bankwidth);
+	mb();
+}
+
+static inline void inline_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+	if (map->cached)
+		memcpy(to, (char *)map->cached + from, len);
+	else
+		memcpy_fromio(to, map->virt + from, len);
+}
+
+static inline void inline_map_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+	memcpy_toio(map->virt + to, from, len);
+}
+
+#ifdef CONFIG_MTD_COMPLEX_MAPPINGS
+#define map_read(map, ofs) (map)->read(map, ofs)
+#define map_copy_from(map, to, from, len) (map)->copy_from(map, to, from, len)
+#define map_write(map, datum, ofs) (map)->write(map, datum, ofs)
+#define map_copy_to(map, to, from, len) (map)->copy_to(map, to, from, len)
+
+extern void simple_map_init(struct map_info *);
+#define map_is_linear(map) (map->phys != NO_XIP)
+
+#else
+#define map_read(map, ofs) inline_map_read(map, ofs)
+#define map_copy_from(map, to, from, len) inline_map_copy_from(map, to, from, len)
+#define map_write(map, datum, ofs) inline_map_write(map, datum, ofs)
+#define map_copy_to(map, to, from, len) inline_map_copy_to(map, to, from, len)
+
+
+#define simple_map_init(map) BUG_ON(!map_bankwidth_supported((map)->bankwidth))
+#define map_is_linear(map) ({ (void)(map); 1; })
+
+#endif /* !CONFIG_MTD_COMPLEX_MAPPINGS */
+
+#endif /* __LINUX_MTD_MAP_H__ */
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
new file mode 100644
index 00000000..80affde5
--- /dev/null
+++ b/include/linux/mtd/mtd.h
@@ -0,0 +1,429 @@
+/*
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org> et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifndef __MTD_MTD_H__
+#define __MTD_MTD_H__
+
+#include <linux/types.h>
+#include <linux/uio.h>
+#include <linux/notifier.h>
+#include <linux/device.h>
+
+#include <mtd/mtd-abi.h>
+
+#include <asm/div64.h>
+
+#define MTD_CHAR_MAJOR 90
+#define MTD_BLOCK_MAJOR 31
+#define MAX_MTD_DEVICES 32
+
+#define MTD_ERASE_PENDING	0x01
+#define MTD_ERASING		0x02
+#define MTD_ERASE_SUSPEND	0x04
+#define MTD_ERASE_DONE		0x08
+#define MTD_ERASE_FAILED	0x10
+
+#define MTD_FAIL_ADDR_UNKNOWN -1LL
+
+/*
+ * If the erase fails, fail_addr might indicate exactly which block failed. If
+ * fail_addr = MTD_FAIL_ADDR_UNKNOWN, the failure was not at the device level
+ * or was not specific to any particular block.
+ */
+struct erase_info {
+	struct mtd_info *mtd;
+	uint64_t addr;
+	uint64_t len;
+	uint64_t fail_addr;
+	u_long time;
+	u_long retries;
+	unsigned dev;
+	unsigned cell;
+	void (*callback) (struct erase_info *self);
+	u_long priv;
+	u_char state;
+	struct erase_info *next;
+};
+
+struct mtd_erase_region_info {
+	uint64_t offset;		/* At which this region starts, from the beginning of the MTD */
+	uint32_t erasesize;		/* For this region */
+	uint32_t numblocks;		/* Number of blocks of erasesize in this region */
+	unsigned long *lockmap;		/* If keeping bitmap of locks */
+};
+
+/**
+ * struct mtd_oob_ops - oob operation operands
+ * @mode:	operation mode
+ *
+ * @len:	number of data bytes to write/read
+ *
+ * @retlen:	number of data bytes written/read
+ *
+ * @ooblen:	number of oob bytes to write/read
+ * @oobretlen:	number of oob bytes written/read
+ * @ooboffs:	offset of oob data in the oob area (only relevant when
+ *		mode = MTD_OPS_PLACE_OOB or MTD_OPS_RAW)
+ * @datbuf:	data buffer - if NULL only oob data are read/written
+ * @oobbuf:	oob data buffer
+ *
+ * Note, it is allowed to read more than one OOB area at one go, but not write.
+ * The interface assumes that the OOB write requests program only one page's
+ * OOB area.
+ */
+struct mtd_oob_ops {
+	unsigned int	mode;
+	size_t		len;
+	size_t		retlen;
+	size_t		ooblen;
+	size_t		oobretlen;
+	uint32_t	ooboffs;
+	uint8_t		*datbuf;
+	uint8_t		*oobbuf;
+};
+
+#define MTD_MAX_OOBFREE_ENTRIES_LARGE	32
+#define MTD_MAX_ECCPOS_ENTRIES_LARGE	448
+/*
+ * Internal ECC layout control structure. For historical reasons, there is a
+ * similar, smaller struct nand_ecclayout_user (in mtd-abi.h) that is retained
+ * for export to user-space via the ECCGETLAYOUT ioctl.
+ * nand_ecclayout should be expandable in the future simply by the above macros.
+ */
+struct nand_ecclayout {
+	__u32 eccbytes;
+	__u32 eccpos[MTD_MAX_ECCPOS_ENTRIES_LARGE];
+	__u32 oobavail;
+	struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES_LARGE];
+};
+
+struct module;	/* only needed for owner field in mtd_info */
+
+struct mtd_info {
+	u_char type;
+	uint32_t flags;
+	uint64_t size;	 // Total size of the MTD
+
+	/* "Major" erase size for the device. Naïve users may take this
+	 * to be the only erase size available, or may use the more detailed
+	 * information below if they desire
+	 */
+	uint32_t erasesize;
+	/* Minimal writable flash unit size. In case of NOR flash it is 1 (even
+	 * though individual bits can be cleared), in case of NAND flash it is
+	 * one NAND page (or half, or one-fourths of it), in case of ECC-ed NOR
+	 * it is of ECC block size, etc. It is illegal to have writesize = 0.
+	 * Any driver registering a struct mtd_info must ensure a writesize of
+	 * 1 or larger.
+	 */
+	uint32_t writesize;
+
+	/*
+	 * Size of the write buffer used by the MTD. MTD devices having a write
+	 * buffer can write multiple writesize chunks at a time. E.g. while
+	 * writing 4 * writesize bytes to a device with 2 * writesize bytes
+	 * buffer the MTD driver can (but doesn't have to) do 2 writesize
+	 * operations, but not 4. Currently, all NANDs have writebufsize
+	 * equivalent to writesize (NAND page size). Some NOR flashes do have
+	 * writebufsize greater than writesize.
+	 */
+	uint32_t writebufsize;
+
+	uint32_t oobsize;   // Amount of OOB data per block (e.g. 16)
+	uint32_t oobavail;  // Available OOB bytes per block
+	
+	uint32_t realerasesize;	//dan_multi add for multi plane access
+	uint32_t realwritesize;
+	uint32_t realoobsize;
+	int planenum;
+
+	/*
+	 * If erasesize is a power of 2 then the shift is stored in
+	 * erasesize_shift otherwise erasesize_shift is zero. Ditto writesize.
+	 */
+	unsigned int erasesize_shift;
+	unsigned int writesize_shift;
+	/* Masks based on erasesize_shift and writesize_shift */
+	unsigned int erasesize_mask;
+	unsigned int writesize_mask;
+
+	// Kernel-only stuff starts here.
+	const char *name;
+	int index;
+
+	/* ECC layout structure pointer - read only! */
+	struct nand_ecclayout *ecclayout;
+
+	/* max number of correctible bit errors per writesize */
+	unsigned int ecc_strength;
+
+	/* Data for variable erase regions. If numeraseregions is zero,
+	 * it means that the whole device has erasesize as given above.
+	 */
+	int numeraseregions;
+	struct mtd_erase_region_info *eraseregions;
+
+	/*
+	 * Do not call via these pointers, use corresponding mtd_*()
+	 * wrappers instead.
+	 */
+	int (*_erase) (struct mtd_info *mtd, struct erase_info *instr);
+	int (*_point) (struct mtd_info *mtd, loff_t from, size_t len,
+		       size_t *retlen, void **virt, resource_size_t *phys);
+	int (*_unpoint) (struct mtd_info *mtd, loff_t from, size_t len);
+	unsigned long (*_get_unmapped_area) (struct mtd_info *mtd,
+					     unsigned long len,
+					     unsigned long offset,
+					     unsigned long flags);
+	int (*_read) (struct mtd_info *mtd, loff_t from, size_t len,
+		      size_t *retlen, u_char *buf);
+	int (*_write) (struct mtd_info *mtd, loff_t to, size_t len,
+		       size_t *retlen, const u_char *buf);
+	int (*_panic_write) (struct mtd_info *mtd, loff_t to, size_t len,
+			     size_t *retlen, const u_char *buf);
+	int (*_read_oob) (struct mtd_info *mtd, loff_t from,
+			  struct mtd_oob_ops *ops);
+	int (*read_bbinfo_facmk) (struct mtd_info *mtd, loff_t from,
+                         struct mtd_oob_ops *ops); //Vincent 20090526
+	int (*_write_oob) (struct mtd_info *mtd, loff_t to,
+			   struct mtd_oob_ops *ops);
+	int (*_get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf,
+				    size_t len);
+	int (*get_para) (struct mtd_info *mtd, int chip);
+	int (*_read_fact_prot_reg) (struct mtd_info *mtd, loff_t from,
+				    size_t len, size_t *retlen, u_char *buf);
+	int (*_get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf,
+				    size_t len);
+	int (*_read_user_prot_reg) (struct mtd_info *mtd, loff_t from,
+				    size_t len, size_t *retlen, u_char *buf);
+	int (*_write_user_prot_reg) (struct mtd_info *mtd, loff_t to,
+				     size_t len, size_t *retlen, u_char *buf);
+	int (*_lock_user_prot_reg) (struct mtd_info *mtd, loff_t from,
+				    size_t len);
+	int (*_writev) (struct mtd_info *mtd, const struct kvec *vecs,
+			unsigned long count, loff_t to, size_t *retlen);
+	void (*_sync) (struct mtd_info *mtd);
+	int (*_lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
+	int (*_unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
+	int (*_is_locked) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
+	int (*_block_isbad) (struct mtd_info *mtd, loff_t ofs);
+	int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs);
+	int (*_suspend) (struct mtd_info *mtd);
+	void (*_resume) (struct mtd_info *mtd);
+	/*
+	 * If the driver is something smart, like UBI, it may need to maintain
+	 * its own reference counting. The below functions are only for driver.
+	 */
+	int (*_get_device) (struct mtd_info *mtd);
+	void (*_put_device) (struct mtd_info *mtd);
+
+	/* Backing device capabilities for this device
+	 * - provides mmap capabilities
+	 */
+	struct backing_dev_info *backing_dev_info;
+
+	struct notifier_block reboot_notifier;  /* default mode before reboot */
+
+	/* ECC status information */
+	struct mtd_ecc_stats ecc_stats;
+	/* Subpage shift (NAND) */
+	int subpage_sft;
+
+	void *priv;
+
+	struct module *owner;
+	struct device dev;
+	int usecount;
+	int blkcnt;
+	int pagecnt;
+	int dwECCBitNum;
+	int dwRetry;
+	int dwRdmz;
+	int dwDDR;
+	int id;
+	int id2;
+	unsigned int spec_clk;
+	int spec_tadl;
+	int bbt_sw_rdmz;
+	uint32_t pageSizek;
+	int ecc_err_cnt;
+	int ecc_err_level;
+};
+
+int mtd_erase(struct mtd_info *mtd, struct erase_info *instr);
+int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
+	      void **virt, resource_size_t *phys);
+int mtd_unpoint(struct mtd_info *mtd, loff_t from, size_t len);
+unsigned long mtd_get_unmapped_area(struct mtd_info *mtd, unsigned long len,
+				    unsigned long offset, unsigned long flags);
+int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
+	     u_char *buf);
+int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
+	      const u_char *buf);
+int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
+		    const u_char *buf);
+
+static inline int mtd_read_oob(struct mtd_info *mtd, loff_t from,
+			       struct mtd_oob_ops *ops)
+{
+	ops->retlen = ops->oobretlen = 0;
+	if (!mtd->_read_oob)
+		return -EOPNOTSUPP;
+	return mtd->_read_oob(mtd, from, ops);
+}
+
+static inline int mtd_write_oob(struct mtd_info *mtd, loff_t to,
+				struct mtd_oob_ops *ops)
+{
+	ops->retlen = ops->oobretlen = 0;
+	if (!mtd->_write_oob)
+		return -EOPNOTSUPP;
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+	return mtd->_write_oob(mtd, to, ops);
+}
+
+int mtd_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf,
+			   size_t len);
+int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
+			   size_t *retlen, u_char *buf);
+int mtd_get_user_prot_info(struct mtd_info *mtd, struct otp_info *buf,
+			   size_t len);
+int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
+			   size_t *retlen, u_char *buf);
+int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len,
+			    size_t *retlen, u_char *buf);
+int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len);
+
+int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
+	       unsigned long count, loff_t to, size_t *retlen);
+
+static inline void mtd_sync(struct mtd_info *mtd)
+{
+	if (mtd->_sync)
+		mtd->_sync(mtd);
+}
+
+int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs);
+int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs);
+
+static inline int mtd_suspend(struct mtd_info *mtd)
+{
+	return mtd->_suspend ? mtd->_suspend(mtd) : 0;
+}
+
+static inline void mtd_resume(struct mtd_info *mtd)
+{
+	if (mtd->_resume)
+		mtd->_resume(mtd);
+}
+
+static inline uint32_t mtd_div_by_eb(uint64_t sz, struct mtd_info *mtd)
+{
+	if (mtd->erasesize_shift)
+		return sz >> mtd->erasesize_shift;
+	do_div(sz, mtd->erasesize);
+	return sz;
+}
+
+static inline uint32_t mtd_mod_by_eb(uint64_t sz, struct mtd_info *mtd)
+{
+	if (mtd->erasesize_shift)
+		return sz & mtd->erasesize_mask;
+	return do_div(sz, mtd->erasesize);
+}
+
+static inline uint32_t mtd_div_by_ws(uint64_t sz, struct mtd_info *mtd)
+{
+	if (mtd->writesize_shift)
+		return sz >> mtd->writesize_shift;
+	do_div(sz, mtd->writesize);
+	return sz;
+}
+
+static inline uint32_t mtd_mod_by_ws(uint64_t sz, struct mtd_info *mtd)
+{
+	if (mtd->writesize_shift)
+		return sz & mtd->writesize_mask;
+	return do_div(sz, mtd->writesize);
+}
+
+static inline int mtd_has_oob(const struct mtd_info *mtd)
+{
+	return mtd->_read_oob && mtd->_write_oob;
+}
+
+static inline int mtd_can_have_bb(const struct mtd_info *mtd)
+{
+	return !!mtd->_block_isbad;
+}
+
+	/* Kernel-side ioctl definitions */
+
+struct mtd_partition;
+struct mtd_part_parser_data;
+extern int add_mtd_device(struct mtd_info *mtd);
+extern int del_mtd_device (struct mtd_info *mtd);
+
+extern int mtd_device_parse_register(struct mtd_info *mtd,
+			      const char **part_probe_types,
+			      struct mtd_part_parser_data *parser_data,
+			      const struct mtd_partition *defparts,
+			      int defnr_parts);
+#define mtd_device_register(master, parts, nr_parts)	\
+	mtd_device_parse_register(master, NULL, NULL, parts, nr_parts)
+extern int mtd_device_unregister(struct mtd_info *master);
+extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
+extern int __get_mtd_device(struct mtd_info *mtd);
+extern void __put_mtd_device(struct mtd_info *mtd);
+extern struct mtd_info *get_mtd_device_nm(const char *name);
+extern void put_mtd_device(struct mtd_info *mtd);
+typedef int (*SF_FPTR)(int l);
+extern SF_FPTR wmt_sf_prot;
+
+
+struct mtd_notifier {
+	void (*add)(struct mtd_info *mtd);
+	void (*remove)(struct mtd_info *mtd);
+	struct list_head list;
+};
+
+
+extern void register_mtd_user (struct mtd_notifier *new);
+extern int unregister_mtd_user (struct mtd_notifier *old);
+void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size);
+
+void mtd_erase_callback(struct erase_info *instr);
+
+static inline int mtd_is_bitflip(int err) {
+	return err == -EUCLEAN;
+}
+
+static inline int mtd_is_eccerr(int err) {
+	return err == -EBADMSG;
+}
+
+static inline int mtd_is_bitflip_or_eccerr(int err) {
+	return mtd_is_bitflip(err) || mtd_is_eccerr(err);
+}
+
+#endif /* __MTD_MTD_H__ */
diff --git a/include/linux/mtd/mtdram.h b/include/linux/mtd/mtdram.h
new file mode 100644
index 00000000..68891313
--- /dev/null
+++ b/include/linux/mtd/mtdram.h
@@ -0,0 +1,8 @@
+#ifndef __MTD_MTDRAM_H__
+#define __MTD_MTDRAM_H__
+
+#include <linux/mtd/mtd.h>
+int mtdram_init_device(struct mtd_info *mtd, void *mapped_address,
+			unsigned long size, char *name);
+
+#endif /* __MTD_MTDRAM_H__ */
diff --git a/include/linux/mtd/nand-gpio.h b/include/linux/mtd/nand-gpio.h
new file mode 100644
index 00000000..51534e50
--- /dev/null
+++ b/include/linux/mtd/nand-gpio.h
@@ -0,0 +1,19 @@
+#ifndef __LINUX_MTD_NAND_GPIO_H
+#define __LINUX_MTD_NAND_GPIO_H
+
+#include <linux/mtd/nand.h>
+
+struct gpio_nand_platdata {
+	int	gpio_nce;
+	int	gpio_nwp;
+	int	gpio_cle;
+	int	gpio_ale;
+	int	gpio_rdy;
+	void	(*adjust_parts)(struct gpio_nand_platdata *, size_t);
+	struct mtd_partition *parts;
+	unsigned int num_parts;
+	unsigned int options;
+	int	chip_delay;
+};
+
+#endif
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
new file mode 100644
index 00000000..19eb23c1
--- /dev/null
+++ b/include/linux/mtd/nand.h
@@ -0,0 +1,828 @@
+/*
+ *  linux/include/linux/mtd/nand.h
+ *
+ *  Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org>
+ *                        Steven J. Hill <sjhill@realitydiluted.com>
+ *		          Thomas Gleixner <tglx@linutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Info:
+ *	Contains standard defines and IDs for NAND flash devices
+ *
+ * Changelog:
+ *	See git changelog.
+ */
+#ifndef __LINUX_MTD_NAND_H
+#define __LINUX_MTD_NAND_H
+
+#include <linux/wait.h>
+#include <linux/spinlock.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/flashchip.h>
+#include <linux/mtd/bbm.h>
+
+struct mtd_info;
+struct nand_flash_dev;
+/* Scan and identify a NAND device */
+extern int nand_scan(struct mtd_info *mtd, int max_chips);
+/*
+ * Separate phases of nand_scan(), allowing board driver to intervene
+ * and override command or ECC setup according to flash type.
+ */
+extern int nand_scan_ident(struct mtd_info *mtd, int max_chips,
+			   struct nand_flash_dev *table);
+extern int nand_scan_tail(struct mtd_info *mtd);
+
+/* Free resources held by the NAND device */
+extern void nand_release(struct mtd_info *mtd);
+
+/* Internal helper for board drivers which need to override command function */
+extern void nand_wait_ready(struct mtd_info *mtd);
+
+/* locks all blocks present in the device */
+extern int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+
+/* unlocks specified locked blocks */
+extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+
+/* The maximum number of NAND chips in an array */
+#define NAND_MAX_CHIPS		8
+
+/*
+ * This constant declares the max. oobsize / page, which
+ * is supported now. If you add a chip with bigger oobsize/page
+ * adjust this accordingly.
+ */
+#define NAND_MAX_OOBSIZE	2560
+#define NAND_MAX_PAGESIZE	32768
+
+/*
+ * Constants for hardware specific CLE/ALE/NCE function
+ *
+ * These are bits which can be or'ed to set/clear multiple
+ * bits in one go.
+ */
+/* Select the chip by setting nCE to low */
+#define NAND_NCE		0x01
+/* Select the command latch by setting CLE to high */
+#define NAND_CLE		0x02
+/* Select the address latch by setting ALE to high */
+#define NAND_ALE		0x04
+
+#define NAND_CTRL_CLE		(NAND_NCE | NAND_CLE)
+#define NAND_CTRL_ALE		(NAND_NCE | NAND_ALE)
+#define NAND_CTRL_CHANGE	0x80
+
+/*
+ * Standard NAND flash commands
+ */
+#define NAND_CMD_READ0		0
+#define NAND_CMD_READ1		1
+#define NAND_CMD_RNDOUT		5
+#define NAND_CMD_PAGEPROG	0x10
+#define NAND_CMD_READOOB	0x50
+#define NAND_CMD_ERASE1		0x60
+#define NAND_CMD_STATUS		0x70
+#define NAND_CMD_STATUS_MULTI	0x71
+#define NAND_CMD_SEQIN		0x80
+#define NAND_CMD_RNDIN		0x85
+#define NAND_CMD_READID		0x90
+#define NAND_CMD_ERASE2		0xd0
+#define NAND_CMD_ERASE3		0xd1
+#define NAND_CMD_PARAM		0xec
+#define NAND_CMD_RESET		0xff
+#define NAND_CMD_RESET_NO_STATUS_READ 0xFF1
+#define NAND_CMD_HYNIX_RETRY_END 0x38
+
+#define NAND_CMD_LOCK		0x2a
+#define NAND_CMD_UNLOCK1	0x23
+#define NAND_CMD_UNLOCK2	0x24
+
+/* Extended commands for large page devices */
+#define NAND_CMD_READSTART	0x30
+#define NAND_CMD_RNDOUTSTART	0xE0
+#define NAND_CMD_CACHEDPROG	0x15
+
+/* Extended commands for AG-AND device */
+/*
+ * Note: the command for NAND_CMD_DEPLETE1 is really 0x00 but
+ *       there is no way to distinguish that from NAND_CMD_READ0
+ *       until the remaining sequence of commands has been completed
+ *       so add a high order bit and mask it off in the command.
+ */
+#define NAND_CMD_DEPLETE1	0x100
+#define NAND_CMD_DEPLETE2	0x38
+#define NAND_CMD_STATUS_MULTI	0x71
+#define NAND_CMD_STATUS_ERROR	0x72
+/* multi-bank error status (banks 0-3) */
+#define NAND_CMD_STATUS_ERROR0	0x73
+#define NAND_CMD_STATUS_ERROR1	0x74
+#define NAND_CMD_STATUS_ERROR2	0x75
+#define NAND_CMD_STATUS_ERROR3	0x76
+#define NAND_CMD_STATUS_RESET	0x7f
+#define NAND_CMD_STATUS_CLEAR	0xff
+
+#define MULTI_READ_1CYCLE       0x200
+#define MULTI_READ_2CYCLE       0x201
+#define MULTI_COPY_1CYCLE				0x202
+#define MULTI_COPY_2CYCLE				0x203
+#define MULTI_COPY_3CYCLE				0x204
+#define COPY_BACK_1CYCLE				0x205
+#define COPY_BACK_2CYCLE				0x206
+
+
+/*
+ * Support Nand special commands
+ */
+#define CACHE_READ							(1<<0)
+#define CACHE_PROG							(1<<1)
+#define COPY_BACK								(1<<2)
+#define INTEL_COPY_BACK					(1<<3)
+#define RANDOM_INPUT						(1<<4)
+#define RANDOM_OUTPUT						(1<<5)
+#define PLANE2_READ							(1<<6)
+#define PLANE2_PROG							(1<<7)
+#define PLANE2_CACHE_READ				(1<<8)
+#define PLANE2_CACHE_PROG				(1<<9)
+#define PLANE2_COPY_BACK				(1<<10)
+#define PLANE2_INTEL_COPY_BACK	(1<<11)
+#define PLANE2_RANDOM_OUTPUT		(1<<12)
+#define PLANE2_ERASE						(1<<13)
+
+#define PLANE4_READ							(1<<16)
+#define PLANE4_PROG							(1<<17)
+#define PLANE4_CACHE_READ				(1<<18)
+#define PLANE4_CACHE_PROG				(1<<19)
+#define PLANE4_COPY_BACK				(1<<20)
+#define PLANE4_INTEL_COPY_BACK	(1<<21)
+#define PLANE4_RANDOM_OUTPUT		(1<<22)
+#define PLANE4_ERASE						(1<<23)
+
+
+#define NAND_CMD_NONE		-1
+
+/* Status bits */
+#define NAND_STATUS_FAIL	0x01
+#define NAND_STATUS_FAIL_N1	0x02
+#define NAND_STATUS_TRUE_READY	0x20
+#define NAND_STATUS_READY	0x40
+#define NAND_STATUS_WP		0x80
+
+/*
+ * Constants for ECC_MODES
+ */
+typedef enum {
+	NAND_ECC_NONE,
+	NAND_ECC_SOFT,
+	NAND_ECC_HW,
+	NAND_ECC_HW_SYNDROME,
+	NAND_ECC_HW_OOB_FIRST,
+	NAND_ECC_SOFT_BCH,
+} nand_ecc_modes_t;
+
+/*
+ * Constants for Hardware ECC
+ */
+/* Reset Hardware ECC for read */
+#define NAND_ECC_READ		0
+/* Reset Hardware ECC for write */
+#define NAND_ECC_WRITE		1
+/* Enable Hardware ECC before syndrome is read back from flash */
+#define NAND_ECC_READSYN	2
+
+/* Bit mask for flags passed to do_nand_read_ecc */
+#define NAND_GET_DEVICE		0x80
+
+
+/*
+ * Option constants for bizarre disfunctionality and real
+ * features.
+ */
+/* Chip can not auto increment pages */
+#define NAND_NO_AUTOINCR	0x00000001
+/* Buswidth is 16 bit */
+#define NAND_BUSWIDTH_16	0x00000002
+/* Device supports partial programming without padding */
+#define NAND_NO_PADDING		0x00000004
+/* Chip has cache program function */
+#define NAND_CACHEPRG		0x00000008
+/* Chip has copy back function */
+#define NAND_COPYBACK		0x00000010
+/*
+ * AND Chip which has 4 banks and a confusing page / block
+ * assignment. See Renesas datasheet for further information.
+ */
+#define NAND_IS_AND		0x00000020
+/*
+ * Chip has a array of 4 pages which can be read without
+ * additional ready /busy waits.
+ */
+#define NAND_4PAGE_ARRAY	0x00000040
+/*
+ * Chip requires that BBT is periodically rewritten to prevent
+ * bits from adjacent blocks from 'leaking' in altering data.
+ * This happens with the Renesas AG-AND chips, possibly others.
+ */
+#define BBT_AUTO_REFRESH	0x00000080
+/*
+ * Chip does not require ready check on read. True
+ * for all large page devices, as they do not support
+ * autoincrement.
+ */
+#define NAND_NO_READRDY		0x00000100
+/* Chip does not allow subpage writes */
+#define NAND_NO_SUBPAGE_WRITE	0x00000200
+
+/* Device is one of 'new' xD cards that expose fake nand command set */
+#define NAND_BROKEN_XD		0x00000400
+
+/* Device behaves just like nand, but is readonly */
+#define NAND_ROM		0x00000800
+
+/* Options valid for Samsung large page devices */
+#define NAND_SAMSUNG_LP_OPTIONS \
+	(NAND_NO_PADDING | NAND_CACHEPRG | NAND_COPYBACK)
+
+/* Macros to identify the above */
+#define NAND_CANAUTOINCR(chip) (!(chip->options & NAND_NO_AUTOINCR))
+#define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING))
+#define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG))
+#define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK))
+/* Large page NAND with SOFT_ECC should support subpage reads */
+#define NAND_SUBPAGE_READ(chip) ((chip->ecc.mode == NAND_ECC_SOFT) \
+					&& (chip->page_shift > 9))
+
+/* Mask to zero out the chip options, which come from the id table */
+#define NAND_CHIPOPTIONS_MSK	(0x0000ffff & ~NAND_NO_AUTOINCR)
+
+/* Non chip related options */
+/* This option skips the bbt scan during initialization. */
+#define NAND_SKIP_BBTSCAN	0x00010000
+/*
+ * This option is defined if the board driver allocates its own buffers
+ * (e.g. because it needs them DMA-coherent).
+ */
+#define NAND_OWN_BUFFERS	0x00020000
+/* Chip may not exist, so silence any errors in scan */
+#define NAND_SCAN_SILENT_NODEV	0x00040000
+
+/* Options set by nand scan */
+/* Nand scan has allocated controller struct */
+#define NAND_CONTROLLER_ALLOC	0x80000000
+
+/* Cell info constants */
+#define NAND_CI_CHIPNR_MSK	0x03
+#define NAND_CI_CELLTYPE_MSK	0x0C
+
+/* Keep gcc happy */
+struct nand_chip;
+
+struct nand_onfi_params {
+	/* rev info and features block */
+	/* 'O' 'N' 'F' 'I'  */
+	u8 sig[4];
+	__le16 revision;
+	__le16 features;
+	__le16 opt_cmd;
+	u8 reserved[22];
+
+	/* manufacturer information block */
+	char manufacturer[12];
+	char model[20];
+	u8 jedec_id;
+	__le16 date_code;
+	u8 reserved2[13];
+
+	/* memory organization block */
+	__le32 byte_per_page;
+	__le16 spare_bytes_per_page;
+	__le32 data_bytes_per_ppage;
+	__le16 spare_bytes_per_ppage;
+	__le32 pages_per_block;
+	__le32 blocks_per_lun;
+	u8 lun_count;
+	u8 addr_cycles;
+	u8 bits_per_cell;
+	__le16 bb_per_lun;
+	__le16 block_endurance;
+	u8 guaranteed_good_blocks;
+	__le16 guaranteed_block_endurance;
+	u8 programs_per_page;
+	u8 ppage_attr;
+	u8 ecc_bits;
+	u8 interleaved_bits;
+	u8 interleaved_ops;
+	u8 reserved3[13];
+
+	/* electrical parameter block */
+	u8 io_pin_capacitance_max;
+	__le16 async_timing_mode;
+	__le16 program_cache_timing_mode;
+	__le16 t_prog;
+	__le16 t_bers;
+	__le16 t_r;
+	__le16 t_ccs;
+	__le16 src_sync_timing_mode;
+	__le16 src_ssync_features;
+	__le16 clk_pin_capacitance_typ;
+	__le16 io_pin_capacitance_typ;
+	__le16 input_pin_capacitance_typ;
+	u8 input_pin_capacitance_max;
+	u8 driver_strenght_support;
+	__le16 t_int_r;
+	__le16 t_ald;
+	u8 reserved4[7];
+
+	/* vendor */
+	u8 reserved5[90];
+
+	__le16 crc;
+} __attribute__((packed));
+
+#define ONFI_CRC_BASE	0x4F4E
+
+/**
+ * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices
+ * @lock:               protection lock
+ * @active:		the mtd device which holds the controller currently
+ * @wq:			wait queue to sleep on if a NAND operation is in
+ *			progress used instead of the per chip wait queue
+ *			when a hw controller is available.
+ */
+struct nand_hw_control {
+	spinlock_t lock;
+	struct nand_chip *active;
+	wait_queue_head_t wq;
+};
+
+/**
+ * struct nand_ecc_ctrl - Control structure for ECC
+ * @mode:	ECC mode
+ * @steps:	number of ECC steps per page
+ * @size:	data bytes per ECC step
+ * @bytes:	ECC bytes per step
+ * @strength:	max number of correctible bits per ECC step
+ * @total:	total number of ECC bytes per page
+ * @prepad:	padding information for syndrome based ECC generators
+ * @postpad:	padding information for syndrome based ECC generators
+ * @layout:	ECC layout control struct pointer
+ * @priv:	pointer to private ECC control data
+ * @hwctl:	function to control hardware ECC generator. Must only
+ *		be provided if an hardware ECC is available
+ * @calculate:	function for ECC calculation or readback from ECC hardware
+ * @correct:	function for ECC correction, matching to ECC generator (sw/hw)
+ * @read_page_raw:	function to read a raw page without ECC
+ * @write_page_raw:	function to write a raw page without ECC
+ * @read_page:	function to read a page according to the ECC generator
+ *		requirements.
+ * @read_subpage:	function to read parts of the page covered by ECC.
+ * @write_page:	function to write a page according to the ECC generator
+ *		requirements.
+ * @write_oob_raw:	function to write chip OOB data without ECC
+ * @read_oob_raw:	function to read chip OOB data without ECC
+ * @read_oob:	function to read chip OOB data
+ * @write_oob:	function to write chip OOB data
+ */
+struct nand_ecc_ctrl {
+	nand_ecc_modes_t mode;
+	int steps;
+	int size;
+	int bytes;
+	int total;
+	int strength;
+	int prepad;
+	int postpad;
+	struct nand_ecclayout	*layout;
+	void *priv;
+	void (*hwctl)(struct mtd_info *mtd, int mode);
+	int (*calculate)(struct mtd_info *mtd, const uint8_t *dat,
+			uint8_t *ecc_code);
+	int (*correct)(struct mtd_info *mtd, uint8_t *dat, uint8_t *read_ecc,
+			uint8_t *calc_ecc);
+	int (*read_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+			uint8_t *buf, int page);
+	void (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+			const uint8_t *buf);
+	int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip,
+			uint8_t *buf, int page);
+	int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
+			uint32_t offs, uint32_t len, uint8_t *buf);
+	void (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
+			const uint8_t *buf);
+	int (*write_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+			int page);
+	int (*read_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+			int page, int sndcmd);
+	int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page,
+			int sndcmd);
+	int (*write_oob)(struct mtd_info *mtd, struct nand_chip *chip,
+			int page);
+        int			(*read_bb_oob)(struct mtd_info *mtd,
+					    struct nand_chip *chip,
+					    int page,
+					    int sndcmd);
+};
+
+/**
+ * struct nand_buffers - buffer structure for read/write
+ * @ecccalc:	buffer for calculated ECC
+ * @ecccode:	buffer for ECC read from flash
+ * @databuf:	buffer for data - dynamically sized
+ *
+ * Do not change the order of buffers. databuf and oobrbuf must be in
+ * consecutive order.
+ */
+struct nand_buffers {
+	uint8_t	ecccalc[NAND_MAX_OOBSIZE];
+	uint8_t	ecccode[NAND_MAX_OOBSIZE];
+	uint8_t databuf[NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE];
+};
+
+/**
+ * struct nand_chip - NAND Private Flash Chip Data
+ * @IO_ADDR_R:		[BOARDSPECIFIC] address to read the 8 I/O lines of the
+ *			flash device
+ * @IO_ADDR_W:		[BOARDSPECIFIC] address to write the 8 I/O lines of the
+ *			flash device.
+ * @read_byte:		[REPLACEABLE] read one byte from the chip
+ * @read_word:		[REPLACEABLE] read one word from the chip
+ * @write_buf:		[REPLACEABLE] write data from the buffer to the chip
+ * @read_buf:		[REPLACEABLE] read data from the chip into the buffer
+ * @verify_buf:		[REPLACEABLE] verify buffer contents against the chip
+ *			data.
+ * @select_chip:	[REPLACEABLE] select chip nr
+ * @block_bad:		[REPLACEABLE] check, if the block is bad
+ * @block_markbad:	[REPLACEABLE] mark the block bad
+ * @cmd_ctrl:		[BOARDSPECIFIC] hardwarespecific function for controlling
+ *			ALE/CLE/nCE. Also used to write command and address
+ * @init_size:		[BOARDSPECIFIC] hardwarespecific function for setting
+ *			mtd->oobsize, mtd->writesize and so on.
+ *			@id_data contains the 8 bytes values of NAND_CMD_READID.
+ *			Return with the bus width.
+ * @dev_ready:		[BOARDSPECIFIC] hardwarespecific function for accessing
+ *			device ready/busy line. If set to NULL no access to
+ *			ready/busy is available and the ready/busy information
+ *			is read from the chip status register.
+ * @cmdfunc:		[REPLACEABLE] hardwarespecific function for writing
+ *			commands to the chip.
+ * @waitfunc:		[REPLACEABLE] hardwarespecific function for wait on
+ *			ready.
+ * @ecc:		[BOARDSPECIFIC] ECC control structure
+ * @buffers:		buffer structure for read/write
+ * @hwcontrol:		platform-specific hardware control structure
+ * @erase_cmd:		[INTERN] erase command write function, selectable due
+ *			to AND support.
+ * @scan_bbt:		[REPLACEABLE] function to scan bad block table
+ * @chip_delay:		[BOARDSPECIFIC] chip dependent delay for transferring
+ *			data from array to read regs (tR).
+ * @state:		[INTERN] the current state of the NAND device
+ * @oob_poi:		"poison value buffer," used for laying out OOB data
+ *			before writing
+ * @page_shift:		[INTERN] number of address bits in a page (column
+ *			address bits).
+ * @phys_erase_shift:	[INTERN] number of address bits in a physical eraseblock
+ * @bbt_erase_shift:	[INTERN] number of address bits in a bbt entry
+ * @chip_shift:		[INTERN] number of address bits in one chip
+ * @options:		[BOARDSPECIFIC] various chip options. They can partly
+ *			be set to inform nand_scan about special functionality.
+ *			See the defines for further explanation.
+ * @bbt_options:	[INTERN] bad block specific options. All options used
+ *			here must come from bbm.h. By default, these options
+ *			will be copied to the appropriate nand_bbt_descr's.
+ * @badblockpos:	[INTERN] position of the bad block marker in the oob
+ *			area.
+ * @badblockbits:	[INTERN] minimum number of set bits in a good block's
+ *			bad block marker position; i.e., BBM == 11110111b is
+ *			not bad when badblockbits == 7
+ * @cellinfo:		[INTERN] MLC/multichip data from chip ident
+ * @numchips:		[INTERN] number of physical chips
+ * @chipsize:		[INTERN] the size of one chip for multichip arrays
+ * @pagemask:		[INTERN] page number mask = number of (pages / chip) - 1
+ * @pagebuf:		[INTERN] holds the pagenumber which is currently in
+ *			data_buf.
+ * @subpagesize:	[INTERN] holds the subpagesize
+ * @onfi_version:	[INTERN] holds the chip ONFI version (BCD encoded),
+ *			non 0 if ONFI supported.
+ * @onfi_params:	[INTERN] holds the ONFI page parameter when ONFI is
+ *			supported, 0 otherwise.
+ * @ecclayout:		[REPLACEABLE] the default ECC placement scheme
+ * @bbt:		[INTERN] bad block table pointer
+ * @bbt_td:		[REPLACEABLE] bad block table descriptor for flash
+ *			lookup.
+ * @bbt_md:		[REPLACEABLE] bad block table mirror descriptor
+ * @badblock_pattern:	[REPLACEABLE] bad block scan pattern used for initial
+ *			bad block scan.
+ * @controller:		[REPLACEABLE] a pointer to a hardware controller
+ *			structure which is shared among multiple independent
+ *			devices.
+ * @priv:		[OPTIONAL] pointer to private chip data
+ * @errstat:		[OPTIONAL] hardware specific function to perform
+ *			additional error status checks (determine if errors are
+ *			correctable).
+ * @write_page:		[REPLACEABLE] High-level page write function
+ */
+
+struct nand_chip {
+	void __iomem *IO_ADDR_R;
+	void __iomem *IO_ADDR_W;
+
+	uint8_t (*read_byte)(struct mtd_info *mtd);
+	u16 (*read_word)(struct mtd_info *mtd);
+	void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
+	void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
+	int (*verify_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
+	void (*select_chip)(struct mtd_info *mtd, int chip);
+	int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip);
+	int (*block_markbad)(struct mtd_info *mtd, loff_t ofs, int type);
+	void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
+	int (*init_size)(struct mtd_info *mtd, struct nand_chip *this,
+			u8 *id_data);
+	int (*dev_ready)(struct mtd_info *mtd);
+	void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column,
+			int page_addr);
+	int(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this);
+	void (*erase_cmd)(struct mtd_info *mtd, int page);
+	int (*scan_bbt)(struct mtd_info *mtd);
+	int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state,
+			int status, int page);
+	int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
+			const uint8_t *buf, int page, int cached, int raw);
+	int (*get_para)(struct mtd_info *mtd, struct nand_chip *chip);
+
+	int chip_delay;
+	unsigned int options;
+	unsigned int bbt_options;
+
+	int page_shift;
+	int pagecnt_shift;
+	int phys_erase_shift;
+	int bbt_erase_shift;
+	int chip_shift;
+	int numchips;
+	uint64_t chipsize;
+	int pagemask;
+	int pagebuf;
+	int subpagesize;
+	uint8_t cellinfo;
+	int badblockpos;
+	int badblockbits;
+
+	int onfi_version;
+	struct nand_onfi_params	onfi_params;
+
+	flstate_t state;
+
+	uint8_t *oob_poi;
+	struct nand_hw_control *controller;
+	struct nand_ecclayout *ecclayout;
+
+	struct nand_ecc_ctrl ecc;
+	struct nand_buffers *buffers;
+	struct nand_hw_control hwcontrol;
+
+	uint8_t *bbt;
+	struct nand_bbt_descr *bbt_td;
+	struct nand_bbt_descr *bbt_md;
+
+	struct nand_bbt_descr *badblock_pattern;
+	struct nand_bbt_descr *retry_pattern;
+	int page_offset[2];
+	struct nand_read_retry_param *cur_chip;
+	int realplanenum;
+	int bbt_plane[2];
+	int status_plane[2];
+
+	void *priv;
+};
+
+/*
+ * NAND Flash Manufacturer ID Codes
+ */
+#define NAND_MFR_TOSHIBA	0x98
+#define NAND_MFR_SAMSUNG	0xec
+#define NAND_MFR_FUJITSU	0x04
+#define NAND_MFR_NATIONAL	0x8f
+#define NAND_MFR_RENESAS	0x07
+#define NAND_MFR_STMICRO	0x20
+#define NAND_MFR_HYNIX		0xad
+#define NAND_MFR_MICRON		0x2c
+#define NAND_MFR_SANDISK	0x45
+#define NAND_MFR_AMD		0x01
+#define NAND_MFR_INTEL		0x89
+#define NAND_MFR_MXIC 		0xc2
+#define NAND_MFR_MIRA 		0x92
+#define NAND_MFR_MACRONIX	0xc2
+
+/**
+ * struct nand_flash_dev - NAND Flash Device ID Structure
+ * @name:	Identify the device type
+ * @id:		device ID code
+ * @pagesize:	Pagesize in bytes. Either 256 or 512 or 0
+ *		If the pagesize is 0, then the real pagesize
+ *		and the eraseize are determined from the
+ *		extended id bytes in the chip
+ * @erasesize:	Size of an erase block in the flash device.
+ * @chipsize:	Total chipsize in Mega Bytes
+ * @options:	Bitfield to store chip relevant options
+ */
+struct nand_flash_dev {
+	char *name;
+	int id;
+	unsigned long pagesize;
+	unsigned long chipsize;
+	unsigned long erasesize;
+	unsigned long options;
+};
+
+#define BOOT_MAGIC_SIZE 0x8
+struct nand_rdtry_param_hdr {
+	unsigned char magic[BOOT_MAGIC_SIZE];
+	unsigned int nand_id;  //nand id
+	unsigned int nand_id_5th;  //nand 5th id
+	unsigned int eslc_reg_cnt; // Enhanced SLC register count.
+	unsigned int total_retry_cnt; // total retry count
+	unsigned int retry_reg_cnt; // retry register count
+	//unsigned char eslc[eslc_reg]; //eslc default data.
+	//unsigned char retry_data[total_retry_cnt * retry_reg_cnt];  /* param data */
+};
+//All
+struct nand_read_retry_param {
+	char magic[32];
+	unsigned int  nand_id;
+	unsigned int  nand_id_5th;
+	unsigned int  eslc_reg_num;
+	unsigned char eslc_offset[32];
+	unsigned char eslc_def_value[32];
+	unsigned char eslc_set_value[32];
+	unsigned int  retry_reg_num;
+	unsigned char  retry_offset[32];
+	unsigned char retry_def_value[32];
+	unsigned char retry_value[256];
+	unsigned int otp_len;
+	unsigned char otp_offset[32];
+	unsigned char otp_data[32];
+	unsigned int total_try_times;
+	int cur_try_times;
+	int (*set_parameter)(struct mtd_info *mtd, int mode, int def_mode);
+	int (*get_parameter)(struct mtd_info *mtd, int mode);
+	int (*get_otp_table)(struct mtd_info *mtd, struct nand_chip *chip);
+	int retry; //1: in retry mode 
+};
+/* #define RETRY_DEBUG */
+
+
+/* DannierChen-2009-10-07 add for new nand flash support list */
+#ifndef DWORD
+#define DWORD	unsigned int
+#endif
+#define MAX_PRODUCT_NAME_LENGTH 0x20
+struct WMT_nand_flash_dev {
+ DWORD dwFlashID;            //composed by 4 bytes of ID. For example:0xADF1801D
+ DWORD dwBlockCount;      //block count of one chip. For example: 1024
+ DWORD dwPageSize;       //page size. For example:2048(other value can be 512 or 4096)
+ DWORD dwSpareSize;       //spare area size. For example:16(almost all kinds of nand is 16)
+ DWORD dwBlockSize;       //block size = dwPageSize * PageCntPerBlock. For example:131072
+ DWORD dwAddressCycle;      //address cycle 4 or 5
+ DWORD dwBI0Position;      //BI0 page postion in block
+ DWORD dwBI1Position;      //BI1 page postion in block
+ DWORD dwBIOffset;       //BI offset in page
+ DWORD dwDataWidth;      //data with X8 or X16
+ DWORD dwPageProgramLimit;     //chip can program PAGE_PROGRAM_LIMIT times within the same page
+ DWORD dwSeqRowReadSupport;    //whether support sequential row read, 1 = support 0 = not support
+ DWORD dwSeqPageProgram;     //chip need sequential page program in a block. 1 = need
+ DWORD dwNandType;       //MLC or SLC
+ DWORD dwECCBitNum;      //ECC bit number needed
+ DWORD dwRWTimming;     //NFC Read Pulse width and Read hold time, write so does. default =0x12101210
+ DWORD dwTadl;      		//NFC write TADL timeing config
+ DWORD dwDDR;      		  //NFC support toshia ddr(toggle) mode = 1 not support = 0
+ DWORD dwRetry;    		  //NFC Read Retry support = 1 not support = 0
+ DWORD dwRdmz;					//NFC Randomizer support = 1 not support = 0
+ DWORD dwFlashID2;      //composed by additional 2 bytes of ID from original 4 bytes.
+ DWORD dwSpeedUpCmd;		/* supprot speed up nand command ex: 2-plane cache read and so on.. */
+ char ProductName[MAX_PRODUCT_NAME_LENGTH]; //product name. for example "HYNIX_NF_HY27UF081G2A"
+ unsigned long options;
+};
+/**
+ * struct nand_manufacturers - NAND Flash Manufacturer ID Structure
+ * @name:	Manufacturer name
+ * @id:		manufacturer ID code of device.
+*/
+struct nand_manufacturers {
+	int id;
+	char *name;
+};
+
+extern struct WMT_nand_flash_dev WMT_nand_flash_ids[];
+extern struct nand_flash_dev nand_flash_ids[];
+extern struct nand_manufacturers nand_manuf_ids[];
+
+extern int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd);
+extern int nand_update_bbt(struct mtd_info *mtd, loff_t offs);
+extern int nand_default_bbt(struct mtd_info *mtd);
+extern int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt, int allow_readfail);
+extern int nand_isbad_bbt_multi(struct mtd_info *mtd, loff_t offs, int allowbbt, int allow_readfail);
+extern int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
+			   int allowbbt);
+extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len,
+			size_t *retlen, uint8_t *buf);
+extern struct nand_read_retry_param chip_table[];
+extern int hynix_get_parameter(struct mtd_info *mtd, int mode);
+extern int hynix_set_parameter(struct mtd_info *mtd, int mode, int def_mode);
+extern int hynix_get_otp(struct mtd_info *mtd, struct nand_chip *chip);
+extern int toshiba_get_parameter(struct mtd_info *mtd, int mode);
+extern int toshiba_set_parameter(struct mtd_info *mtd, int mode, int def_mode);
+extern int samsung_get_parameter(struct mtd_info *mtd, int mode);
+extern int samsung_set_parameter(struct mtd_info *mtd, int mode, int def_mode);
+extern int sandisk_get_parameter(struct mtd_info *mtd, int mode);
+extern int sandisk_set_parameter(struct mtd_info *mtd, int mode, int def_mode);
+extern int micron_get_parameter(struct mtd_info *mtd, int mode);
+extern int micron_set_parameter(struct mtd_info *mtd, int mode, int def_mode);
+
+
+
+#ifndef ARRAY_SIZE
+#define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0]))
+#endif
+#define READ_RETRY_CHIP_NUM ARRAY_SIZE(chip_table)
+#define ESLC_MODE 0
+#define READ_RETRY_MODE 1
+#define TEST_MODE 2
+#define DEFAULT_VALUE 0
+#define ECC_ERROR_VALUE 1
+/**
+ * struct platform_nand_chip - chip level device structure
+ * @nr_chips:		max. number of chips to scan for
+ * @chip_offset:	chip number offset
+ * @nr_partitions:	number of partitions pointed to by partitions (or zero)
+ * @partitions:		mtd partition list
+ * @chip_delay:		R/B delay value in us
+ * @options:		Option flags, e.g. 16bit buswidth
+ * @bbt_options:	BBT option flags, e.g. NAND_BBT_USE_FLASH
+ * @ecclayout:		ECC layout info structure
+ * @part_probe_types:	NULL-terminated array of probe types
+ */
+struct platform_nand_chip {
+	int nr_chips;
+	int chip_offset;
+	int nr_partitions;
+	struct mtd_partition *partitions;
+	struct nand_ecclayout *ecclayout;
+	int chip_delay;
+	unsigned int options;
+	unsigned int bbt_options;
+	const char **part_probe_types;
+};
+
+/* Keep gcc happy */
+struct platform_device;
+
+/**
+ * struct platform_nand_ctrl - controller level device structure
+ * @probe:		platform specific function to probe/setup hardware
+ * @remove:		platform specific function to remove/teardown hardware
+ * @hwcontrol:		platform specific hardware control structure
+ * @dev_ready:		platform specific function to read ready/busy pin
+ * @select_chip:	platform specific chip select function
+ * @cmd_ctrl:		platform specific function for controlling
+ *			ALE/CLE/nCE. Also used to write command and address
+ * @write_buf:		platform specific function for write buffer
+ * @read_buf:		platform specific function for read buffer
+ * @priv:		private data to transport driver specific settings
+ *
+ * All fields are optional and depend on the hardware driver requirements
+ */
+struct platform_nand_ctrl {
+	int (*probe)(struct platform_device *pdev);
+	void (*remove)(struct platform_device *pdev);
+	void (*hwcontrol)(struct mtd_info *mtd, int cmd);
+	int (*dev_ready)(struct mtd_info *mtd);
+	void (*select_chip)(struct mtd_info *mtd, int chip);
+	void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
+	void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
+	void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
+	void *priv;
+};
+
+/**
+ * struct platform_nand_data - container structure for platform-specific data
+ * @chip:		chip level chip structure
+ * @ctrl:		controller level device structure
+ */
+struct platform_nand_data {
+	struct platform_nand_chip chip;
+	struct platform_nand_ctrl ctrl;
+};
+
+/* Some helpers to access the data structures */
+static inline
+struct platform_nand_chip *get_platform_nandchip(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	return chip->priv;
+}
+
+#endif /* __LINUX_MTD_NAND_H */
diff --git a/include/linux/mtd/nand_bch.h b/include/linux/mtd/nand_bch.h
new file mode 100644
index 00000000..74acf536
--- /dev/null
+++ b/include/linux/mtd/nand_bch.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright © 2011 Ivan Djelic <ivan.djelic@parrot.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file is the header for the NAND BCH ECC implementation.
+ */
+
+#ifndef __MTD_NAND_BCH_H__
+#define __MTD_NAND_BCH_H__
+
+struct mtd_info;
+struct nand_bch_control;
+
+#if defined(CONFIG_MTD_NAND_ECC_BCH)
+
+static inline int mtd_nand_has_bch(void) { return 1; }
+
+/*
+ * Calculate BCH ecc code
+ */
+int nand_bch_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+			   u_char *ecc_code);
+
+/*
+ * Detect and correct bit errors
+ */
+int nand_bch_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc,
+			  u_char *calc_ecc);
+/*
+ * Initialize BCH encoder/decoder
+ */
+struct nand_bch_control *
+nand_bch_init(struct mtd_info *mtd, unsigned int eccsize,
+	      unsigned int eccbytes, struct nand_ecclayout **ecclayout);
+/*
+ * Release BCH encoder/decoder resources
+ */
+void nand_bch_free(struct nand_bch_control *nbc);
+
+#else /* !CONFIG_MTD_NAND_ECC_BCH */
+
+static inline int mtd_nand_has_bch(void) { return 0; }
+
+static inline int
+nand_bch_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+		       u_char *ecc_code)
+{
+	return -1;
+}
+
+static inline int
+nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf,
+		      unsigned char *read_ecc, unsigned char *calc_ecc)
+{
+	return -1;
+}
+
+static inline struct nand_bch_control *
+nand_bch_init(struct mtd_info *mtd, unsigned int eccsize,
+	      unsigned int eccbytes, struct nand_ecclayout **ecclayout)
+{
+	return NULL;
+}
+
+static inline void nand_bch_free(struct nand_bch_control *nbc) {}
+
+#endif /* CONFIG_MTD_NAND_ECC_BCH */
+
+#endif /* __MTD_NAND_BCH_H__ */
diff --git a/include/linux/mtd/nand_ecc.h b/include/linux/mtd/nand_ecc.h
new file mode 100644
index 00000000..4d8406c8
--- /dev/null
+++ b/include/linux/mtd/nand_ecc.h
@@ -0,0 +1,42 @@
+/*
+ *  drivers/mtd/nand_ecc.h
+ *
+ *  Copyright (C) 2000-2010 Steven J. Hill <sjhill@realitydiluted.com>
+ *			    David Woodhouse <dwmw2@infradead.org>
+ *			    Thomas Gleixner <tglx@linutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file is the header for the ECC algorithm.
+ */
+
+#ifndef __MTD_NAND_ECC_H__
+#define __MTD_NAND_ECC_H__
+
+struct mtd_info;
+
+/*
+ * Calculate 3 byte ECC code for eccsize byte block
+ */
+void __nand_calculate_ecc(const u_char *dat, unsigned int eccsize,
+				u_char *ecc_code);
+
+/*
+ * Calculate 3 byte ECC code for 256/512 byte block
+ */
+int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code);
+
+/*
+ * Detect and correct a 1 bit error for eccsize byte block
+ */
+int __nand_correct_data(u_char *dat, u_char *read_ecc, u_char *calc_ecc,
+			unsigned int eccsize);
+
+/*
+ * Detect and correct a 1 bit error for 256/512 byte block
+ */
+int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
+
+#endif /* __MTD_NAND_ECC_H__ */
diff --git a/include/linux/mtd/ndfc.h b/include/linux/mtd/ndfc.h
new file mode 100644
index 00000000..d0558a98
--- /dev/null
+++ b/include/linux/mtd/ndfc.h
@@ -0,0 +1,67 @@
+/*
+ *  linux/include/linux/mtd/ndfc.h
+ *
+ *  Copyright (c) 2006 Thomas Gleixner <tglx@linutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Info:
+ *   Contains defines, datastructures for ndfc nand controller
+ *
+ */
+#ifndef __LINUX_MTD_NDFC_H
+#define __LINUX_MTD_NDFC_H
+
+/* NDFC Register definitions */
+#define NDFC_CMD		0x00
+#define NDFC_ALE		0x04
+#define NDFC_DATA		0x08
+#define NDFC_ECC		0x10
+#define NDFC_BCFG0		0x30
+#define NDFC_BCFG1		0x34
+#define NDFC_BCFG2		0x38
+#define NDFC_BCFG3		0x3c
+#define NDFC_CCR		0x40
+#define NDFC_STAT		0x44
+#define NDFC_HWCTL		0x48
+#define NDFC_REVID		0x50
+
+#define NDFC_STAT_IS_READY	0x01000000
+
+#define NDFC_CCR_RESET_CE	0x80000000 /* CE Reset */
+#define NDFC_CCR_RESET_ECC	0x40000000 /* ECC Reset */
+#define NDFC_CCR_RIE		0x20000000 /* Interrupt Enable on Device Rdy */
+#define NDFC_CCR_REN		0x10000000 /* Enable wait for Rdy in LinearR */
+#define NDFC_CCR_ROMEN		0x08000000 /* Enable ROM In LinearR */
+#define NDFC_CCR_ARE		0x04000000 /* Auto-Read Enable */
+#define NDFC_CCR_BS(x)		(((x) & 0x3) << 24) /* Select Bank on CE[x] */
+#define NDFC_CCR_BS_MASK	0x03000000 /* Select Bank */
+#define NDFC_CCR_ARAC0		0x00000000 /* 3 Addr, 1 Col 2 Row 512b page */
+#define NDFC_CCR_ARAC1		0x00001000 /* 4 Addr, 1 Col 3 Row 512b page */
+#define NDFC_CCR_ARAC2		0x00002000 /* 4 Addr, 2 Col 2 Row 2K page */
+#define NDFC_CCR_ARAC3		0x00003000 /* 5 Addr, 2 Col 3 Row 2K page */
+#define NDFC_CCR_ARAC_MASK	0x00003000 /* Auto-Read mode Addr Cycles */
+#define NDFC_CCR_RPG		0x0000C000 /* Auto-Read Page */
+#define NDFC_CCR_EBCC		0x00000004 /* EBC Configuration Completed */
+#define NDFC_CCR_DHC		0x00000002 /* Direct Hardware Control Enable */
+
+#define NDFC_BxCFG_EN		0x80000000 /* Bank Enable */
+#define NDFC_BxCFG_CED		0x40000000 /* nCE Style */
+#define NDFC_BxCFG_SZ_MASK	0x08000000 /* Bank Size */
+#define NDFC_BxCFG_SZ_8BIT	0x00000000 /* 8bit */
+#define NDFC_BxCFG_SZ_16BIT	0x08000000 /* 16bit */
+
+#define NDFC_MAX_BANKS		4
+
+struct ndfc_controller_settings {
+	uint32_t	ccr_settings;
+	uint64_t	ndfc_erpn;
+};
+
+struct ndfc_chip_settings {
+	uint32_t	bank_settings;
+};
+
+#endif
diff --git a/include/linux/mtd/nftl.h b/include/linux/mtd/nftl.h
new file mode 100644
index 00000000..b059629e
--- /dev/null
+++ b/include/linux/mtd/nftl.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifndef __MTD_NFTL_H__
+#define __MTD_NFTL_H__
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/blktrans.h>
+
+#include <mtd/nftl-user.h>
+
+/* these info are used in ReplUnitTable */
+#define BLOCK_NIL          0xffff /* last block of a chain */
+#define BLOCK_FREE         0xfffe /* free block */
+#define BLOCK_NOTEXPLORED  0xfffd /* non explored block, only used during mounting */
+#define BLOCK_RESERVED     0xfffc /* bios block or bad block */
+
+struct NFTLrecord {
+	struct mtd_blktrans_dev mbd;
+	__u16 MediaUnit, SpareMediaUnit;
+	__u32 EraseSize;
+	struct NFTLMediaHeader MediaHdr;
+	int usecount;
+	unsigned char heads;
+	unsigned char sectors;
+	unsigned short cylinders;
+	__u16 numvunits;
+	__u16 lastEUN;                  /* should be suppressed */
+	__u16 numfreeEUNs;
+	__u16 LastFreeEUN; 		/* To speed up finding a free EUN */
+	int head,sect,cyl;
+	__u16 *EUNtable; 		/* [numvunits]: First EUN for each virtual unit  */
+	__u16 *ReplUnitTable; 		/* [numEUNs]: ReplUnitNumber for each */
+        unsigned int nb_blocks;		/* number of physical blocks */
+        unsigned int nb_boot_blocks;	/* number of blocks used by the bios */
+        struct erase_info instr;
+	struct nand_ecclayout oobinfo;
+};
+
+int NFTL_mount(struct NFTLrecord *s);
+int NFTL_formatblock(struct NFTLrecord *s, int block);
+
+int nftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len,
+		  size_t *retlen, uint8_t *buf);
+int nftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len,
+		   size_t *retlen, uint8_t *buf);
+
+#ifndef NFTL_MAJOR
+#define NFTL_MAJOR 93
+#endif
+
+#define MAX_NFTLS 16
+#define MAX_SECTORS_PER_UNIT 64
+#define NFTL_PARTN_BITS 4
+
+#endif /* __MTD_NFTL_H__ */
diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
new file mode 100644
index 00000000..4596503c
--- /dev/null
+++ b/include/linux/mtd/onenand.h
@@ -0,0 +1,242 @@
+/*
+ *  linux/include/linux/mtd/onenand.h
+ *
+ *  Copyright © 2005-2009 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_MTD_ONENAND_H
+#define __LINUX_MTD_ONENAND_H
+
+#include <linux/spinlock.h>
+#include <linux/completion.h>
+#include <linux/mtd/flashchip.h>
+#include <linux/mtd/onenand_regs.h>
+#include <linux/mtd/bbm.h>
+
+#define MAX_DIES		2
+#define MAX_BUFFERRAM		2
+
+/* Scan and identify a OneNAND device */
+extern int onenand_scan(struct mtd_info *mtd, int max_chips);
+/* Free resources held by the OneNAND device */
+extern void onenand_release(struct mtd_info *mtd);
+
+/**
+ * struct onenand_bufferram - OneNAND BufferRAM Data
+ * @blockpage:		block & page address in BufferRAM
+ */
+struct onenand_bufferram {
+	int	blockpage;
+};
+
+/**
+ * struct onenand_chip - OneNAND Private Flash Chip Data
+ * @base:		[BOARDSPECIFIC] address to access OneNAND
+ * @dies:		[INTERN][FLEX-ONENAND] number of dies on chip
+ * @boundary:		[INTERN][FLEX-ONENAND] Boundary of the dies
+ * @diesize:		[INTERN][FLEX-ONENAND] Size of the dies
+ * @chipsize:		[INTERN] the size of one chip for multichip arrays
+ *			FIXME For Flex-OneNAND, chipsize holds maximum possible
+ *			device size ie when all blocks are considered MLC
+ * @device_id:		[INTERN] device ID
+ * @density_mask:	chip density, used for DDP devices
+ * @verstion_id:	[INTERN] version ID
+ * @options:		[BOARDSPECIFIC] various chip options. They can
+ *			partly be set to inform onenand_scan about
+ * @erase_shift:	[INTERN] number of address bits in a block
+ * @page_shift:		[INTERN] number of address bits in a page
+ * @page_mask:		[INTERN] a page per block mask
+ * @writesize:		[INTERN] a real page size
+ * @bufferram_index:	[INTERN] BufferRAM index
+ * @bufferram:		[INTERN] BufferRAM info
+ * @readw:		[REPLACEABLE] hardware specific function for read short
+ * @writew:		[REPLACEABLE] hardware specific function for write short
+ * @command:		[REPLACEABLE] hardware specific function for writing
+ *			commands to the chip
+ * @wait:		[REPLACEABLE] hardware specific function for wait on ready
+ * @bbt_wait:		[REPLACEABLE] hardware specific function for bbt wait on ready
+ * @unlock_all:		[REPLACEABLE] hardware specific function for unlock all
+ * @read_bufferram:	[REPLACEABLE] hardware specific function for BufferRAM Area
+ * @write_bufferram:	[REPLACEABLE] hardware specific function for BufferRAM Area
+ * @read_word:		[REPLACEABLE] hardware specific function for read
+ *			register of OneNAND
+ * @write_word:		[REPLACEABLE] hardware specific function for write
+ *			register of OneNAND
+ * @mmcontrol:		sync burst read function
+ * @chip_probe:		[REPLACEABLE] hardware specific function for chip probe
+ * @block_markbad:	function to mark a block as bad
+ * @scan_bbt:		[REPLACEALBE] hardware specific function for scanning
+ *			Bad block Table
+ * @chip_lock:		[INTERN] spinlock used to protect access to this
+ *			structure and the chip
+ * @wq:			[INTERN] wait queue to sleep on if a OneNAND
+ *			operation is in progress
+ * @state:		[INTERN] the current state of the OneNAND device
+ * @page_buf:		[INTERN] page main data buffer
+ * @oob_buf:		[INTERN] page oob data buffer
+ * @subpagesize:	[INTERN] holds the subpagesize
+ * @ecclayout:		[REPLACEABLE] the default ecc placement scheme
+ * @bbm:		[REPLACEABLE] pointer to Bad Block Management
+ * @priv:		[OPTIONAL] pointer to private chip date
+ */
+struct onenand_chip {
+	void __iomem		*base;
+	unsigned		dies;
+	unsigned		boundary[MAX_DIES];
+	loff_t			diesize[MAX_DIES];
+	unsigned int		chipsize;
+	unsigned int		device_id;
+	unsigned int		version_id;
+	unsigned int		technology;
+	unsigned int		density_mask;
+	unsigned int		options;
+
+	unsigned int		erase_shift;
+	unsigned int		page_shift;
+	unsigned int		page_mask;
+	unsigned int		writesize;
+
+	unsigned int		bufferram_index;
+	struct onenand_bufferram	bufferram[MAX_BUFFERRAM];
+
+	int (*command)(struct mtd_info *mtd, int cmd, loff_t address, size_t len);
+	int (*wait)(struct mtd_info *mtd, int state);
+	int (*bbt_wait)(struct mtd_info *mtd, int state);
+	void (*unlock_all)(struct mtd_info *mtd);
+	int (*read_bufferram)(struct mtd_info *mtd, int area,
+			unsigned char *buffer, int offset, size_t count);
+	int (*write_bufferram)(struct mtd_info *mtd, int area,
+			const unsigned char *buffer, int offset, size_t count);
+	unsigned short (*read_word)(void __iomem *addr);
+	void (*write_word)(unsigned short value, void __iomem *addr);
+	void (*mmcontrol)(struct mtd_info *mtd, int sync_read);
+	int (*chip_probe)(struct mtd_info *mtd);
+	int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);
+	int (*scan_bbt)(struct mtd_info *mtd);
+	int (*enable)(struct mtd_info *mtd);
+	int (*disable)(struct mtd_info *mtd);
+
+	struct completion	complete;
+	int			irq;
+
+	spinlock_t		chip_lock;
+	wait_queue_head_t	wq;
+	flstate_t		state;
+	unsigned char		*page_buf;
+	unsigned char		*oob_buf;
+#ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE
+	unsigned char		*verify_buf;
+#endif
+
+	int			subpagesize;
+	struct nand_ecclayout	*ecclayout;
+
+	void			*bbm;
+
+	void			*priv;
+
+	/*
+	 * Shows that the current operation is composed
+	 * of sequence of commands. For example, cache program.
+	 * Such command status OnGo bit is checked at the end of
+	 * sequence.
+	 */
+	unsigned int		ongoing;
+};
+
+/*
+ * Helper macros
+ */
+#define ONENAND_PAGES_PER_BLOCK        (1<<6)
+
+#define ONENAND_CURRENT_BUFFERRAM(this)		(this->bufferram_index)
+#define ONENAND_NEXT_BUFFERRAM(this)		(this->bufferram_index ^ 1)
+#define ONENAND_SET_NEXT_BUFFERRAM(this)	(this->bufferram_index ^= 1)
+#define ONENAND_SET_PREV_BUFFERRAM(this)	(this->bufferram_index ^= 1)
+#define ONENAND_SET_BUFFERRAM0(this)		(this->bufferram_index = 0)
+#define ONENAND_SET_BUFFERRAM1(this)		(this->bufferram_index = 1)
+
+#define FLEXONENAND(this)						\
+	(this->device_id & DEVICE_IS_FLEXONENAND)
+#define ONENAND_GET_SYS_CFG1(this)					\
+	(this->read_word(this->base + ONENAND_REG_SYS_CFG1))
+#define ONENAND_SET_SYS_CFG1(v, this)					\
+	(this->write_word(v, this->base + ONENAND_REG_SYS_CFG1))
+
+#define ONENAND_IS_DDP(this)						\
+	(this->device_id & ONENAND_DEVICE_IS_DDP)
+
+#define ONENAND_IS_MLC(this)						\
+	(this->technology & ONENAND_TECHNOLOGY_IS_MLC)
+
+#ifdef CONFIG_MTD_ONENAND_2X_PROGRAM
+#define ONENAND_IS_2PLANE(this)						\
+	(this->options & ONENAND_HAS_2PLANE)
+#else
+#define ONENAND_IS_2PLANE(this)			(0)
+#endif
+
+#define ONENAND_IS_CACHE_PROGRAM(this)					\
+	(this->options & ONENAND_HAS_CACHE_PROGRAM)
+
+#define ONENAND_IS_NOP_1(this)						\
+	(this->options & ONENAND_HAS_NOP_1)
+
+/* Check byte access in OneNAND */
+#define ONENAND_CHECK_BYTE_ACCESS(addr)		(addr & 0x1)
+
+/*
+ * Options bits
+ */
+#define ONENAND_HAS_CONT_LOCK		(0x0001)
+#define ONENAND_HAS_UNLOCK_ALL		(0x0002)
+#define ONENAND_HAS_2PLANE		(0x0004)
+#define ONENAND_HAS_4KB_PAGE		(0x0008)
+#define ONENAND_HAS_CACHE_PROGRAM	(0x0010)
+#define ONENAND_HAS_NOP_1		(0x0020)
+#define ONENAND_SKIP_UNLOCK_CHECK	(0x0100)
+#define ONENAND_PAGEBUF_ALLOC		(0x1000)
+#define ONENAND_OOBBUF_ALLOC		(0x2000)
+#define ONENAND_SKIP_INITIAL_UNLOCKING	(0x4000)
+
+#define ONENAND_IS_4KB_PAGE(this)					\
+	(this->options & ONENAND_HAS_4KB_PAGE)
+
+/*
+ * OneNAND Flash Manufacturer ID Codes
+ */
+#define ONENAND_MFR_SAMSUNG	0xec
+#define ONENAND_MFR_NUMONYX	0x20
+
+/**
+ * struct onenand_manufacturers - NAND Flash Manufacturer ID Structure
+ * @name:	Manufacturer name
+ * @id:		manufacturer ID code of device.
+*/
+struct onenand_manufacturers {
+        int id;
+        char *name;
+};
+
+int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
+			 struct mtd_oob_ops *ops);
+unsigned onenand_block(struct onenand_chip *this, loff_t addr);
+loff_t onenand_addr(struct onenand_chip *this, int block);
+int flexonenand_region(struct mtd_info *mtd, loff_t addr);
+
+struct mtd_partition;
+
+struct onenand_platform_data {
+	void		(*mmcontrol)(struct mtd_info *mtd, int sync_read);
+	int		(*read_bufferram)(struct mtd_info *mtd, int area,
+			unsigned char *buffer, int offset, size_t count);
+	struct mtd_partition *parts;
+	unsigned int	nr_parts;
+};
+
+#endif	/* __LINUX_MTD_ONENAND_H */
diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h
new file mode 100644
index 00000000..d60130f8
--- /dev/null
+++ b/include/linux/mtd/onenand_regs.h
@@ -0,0 +1,223 @@
+/*
+ *  linux/include/linux/mtd/onenand_regs.h
+ *
+ *  OneNAND Register header file
+ *
+ *  Copyright (C) 2005-2007 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ONENAND_REG_H
+#define __ONENAND_REG_H
+
+/* Memory Address Map Translation (Word order) */
+#define ONENAND_MEMORY_MAP(x)		((x) << 1)
+
+/*
+ * External BufferRAM area
+ */
+#define	ONENAND_BOOTRAM			ONENAND_MEMORY_MAP(0x0000)
+#define	ONENAND_DATARAM			ONENAND_MEMORY_MAP(0x0200)
+#define	ONENAND_SPARERAM		ONENAND_MEMORY_MAP(0x8010)
+
+/*
+ * OneNAND Registers
+ */
+#define ONENAND_REG_MANUFACTURER_ID	ONENAND_MEMORY_MAP(0xF000)
+#define ONENAND_REG_DEVICE_ID		ONENAND_MEMORY_MAP(0xF001)
+#define ONENAND_REG_VERSION_ID		ONENAND_MEMORY_MAP(0xF002)
+#define ONENAND_REG_DATA_BUFFER_SIZE	ONENAND_MEMORY_MAP(0xF003)
+#define ONENAND_REG_BOOT_BUFFER_SIZE	ONENAND_MEMORY_MAP(0xF004)
+#define ONENAND_REG_NUM_BUFFERS		ONENAND_MEMORY_MAP(0xF005)
+#define ONENAND_REG_TECHNOLOGY		ONENAND_MEMORY_MAP(0xF006)
+
+#define ONENAND_REG_START_ADDRESS1	ONENAND_MEMORY_MAP(0xF100)
+#define ONENAND_REG_START_ADDRESS2	ONENAND_MEMORY_MAP(0xF101)
+#define ONENAND_REG_START_ADDRESS3	ONENAND_MEMORY_MAP(0xF102)
+#define ONENAND_REG_START_ADDRESS4	ONENAND_MEMORY_MAP(0xF103)
+#define ONENAND_REG_START_ADDRESS5	ONENAND_MEMORY_MAP(0xF104)
+#define ONENAND_REG_START_ADDRESS6	ONENAND_MEMORY_MAP(0xF105)
+#define ONENAND_REG_START_ADDRESS7	ONENAND_MEMORY_MAP(0xF106)
+#define ONENAND_REG_START_ADDRESS8	ONENAND_MEMORY_MAP(0xF107)
+
+#define ONENAND_REG_START_BUFFER	ONENAND_MEMORY_MAP(0xF200)
+#define ONENAND_REG_COMMAND		ONENAND_MEMORY_MAP(0xF220)
+#define ONENAND_REG_SYS_CFG1		ONENAND_MEMORY_MAP(0xF221)
+#define ONENAND_REG_SYS_CFG2		ONENAND_MEMORY_MAP(0xF222)
+#define ONENAND_REG_CTRL_STATUS		ONENAND_MEMORY_MAP(0xF240)
+#define ONENAND_REG_INTERRUPT		ONENAND_MEMORY_MAP(0xF241)
+#define ONENAND_REG_START_BLOCK_ADDRESS	ONENAND_MEMORY_MAP(0xF24C)
+#define ONENAND_REG_END_BLOCK_ADDRESS	ONENAND_MEMORY_MAP(0xF24D)
+#define ONENAND_REG_WP_STATUS		ONENAND_MEMORY_MAP(0xF24E)
+
+#define ONENAND_REG_ECC_STATUS		ONENAND_MEMORY_MAP(0xFF00)
+#define ONENAND_REG_ECC_M0		ONENAND_MEMORY_MAP(0xFF01)
+#define ONENAND_REG_ECC_S0		ONENAND_MEMORY_MAP(0xFF02)
+#define ONENAND_REG_ECC_M1		ONENAND_MEMORY_MAP(0xFF03)
+#define ONENAND_REG_ECC_S1		ONENAND_MEMORY_MAP(0xFF04)
+#define ONENAND_REG_ECC_M2		ONENAND_MEMORY_MAP(0xFF05)
+#define ONENAND_REG_ECC_S2		ONENAND_MEMORY_MAP(0xFF06)
+#define ONENAND_REG_ECC_M3		ONENAND_MEMORY_MAP(0xFF07)
+#define ONENAND_REG_ECC_S3		ONENAND_MEMORY_MAP(0xFF08)
+
+/*
+ * Device ID Register F001h (R)
+ */
+#define DEVICE_IS_FLEXONENAND		(1 << 9)
+#define FLEXONENAND_PI_MASK		(0x3ff)
+#define FLEXONENAND_PI_UNLOCK_SHIFT	(14)
+#define ONENAND_DEVICE_DENSITY_MASK	(0xf)
+#define ONENAND_DEVICE_DENSITY_SHIFT	(4)
+#define ONENAND_DEVICE_IS_DDP		(1 << 3)
+#define ONENAND_DEVICE_IS_DEMUX		(1 << 2)
+#define ONENAND_DEVICE_VCC_MASK		(0x3)
+
+#define ONENAND_DEVICE_DENSITY_512Mb	(0x002)
+#define ONENAND_DEVICE_DENSITY_1Gb	(0x003)
+#define ONENAND_DEVICE_DENSITY_2Gb	(0x004)
+#define ONENAND_DEVICE_DENSITY_4Gb	(0x005)
+
+/*
+ * Version ID Register F002h (R)
+ */
+#define ONENAND_VERSION_PROCESS_SHIFT	(8)
+
+/*
+ * Technology Register F006h (R)
+ */
+#define ONENAND_TECHNOLOGY_IS_MLC	(1 << 0)
+
+/*
+ * Start Address 1 F100h (R/W) & Start Address 2 F101h (R/W)
+ */
+#define ONENAND_DDP_SHIFT		(15)
+#define ONENAND_DDP_CHIP0		(0)
+#define ONENAND_DDP_CHIP1		(1 << ONENAND_DDP_SHIFT)
+
+/*
+ * Start Address 8 F107h (R/W)
+ */
+/* Note: It's actually 0x3f in case of SLC */
+#define ONENAND_FPA_MASK		(0x7f)
+#define ONENAND_FPA_SHIFT		(2)
+#define ONENAND_FSA_MASK		(0x03)
+
+/*
+ * Start Buffer Register F200h (R/W)
+ */
+#define ONENAND_BSA_MASK		(0x03)
+#define ONENAND_BSA_SHIFT		(8)
+#define ONENAND_BSA_BOOTRAM		(0 << 2)
+#define ONENAND_BSA_DATARAM0		(2 << 2)
+#define ONENAND_BSA_DATARAM1		(3 << 2)
+/* Note: It's actually 0x03 in case of SLC */
+#define ONENAND_BSC_MASK		(0x07)
+
+/*
+ * Command Register F220h (R/W)
+ */
+#define ONENAND_CMD_READ		(0x00)
+#define ONENAND_CMD_READOOB		(0x13)
+#define ONENAND_CMD_PROG		(0x80)
+#define ONENAND_CMD_PROGOOB		(0x1A)
+#define ONENAND_CMD_2X_PROG		(0x7D)
+#define ONENAND_CMD_2X_CACHE_PROG	(0x7F)
+#define ONENAND_CMD_UNLOCK		(0x23)
+#define ONENAND_CMD_LOCK		(0x2A)
+#define ONENAND_CMD_LOCK_TIGHT		(0x2C)
+#define ONENAND_CMD_UNLOCK_ALL		(0x27)
+#define ONENAND_CMD_ERASE		(0x94)
+#define ONENAND_CMD_MULTIBLOCK_ERASE	(0x95)
+#define ONENAND_CMD_ERASE_VERIFY	(0x71)
+#define ONENAND_CMD_RESET		(0xF0)
+#define ONENAND_CMD_OTP_ACCESS		(0x65)
+#define ONENAND_CMD_READID		(0x90)
+#define FLEXONENAND_CMD_PI_UPDATE	(0x05)
+#define FLEXONENAND_CMD_PI_ACCESS	(0x66)
+#define FLEXONENAND_CMD_RECOVER_LSB	(0x05)
+
+/* NOTE: Those are not *REAL* commands */
+#define ONENAND_CMD_BUFFERRAM		(0x1978)
+#define FLEXONENAND_CMD_READ_PI		(0x1985)
+
+/*
+ * System Configuration 1 Register F221h (R, R/W)
+ */
+#define ONENAND_SYS_CFG1_SYNC_READ	(1 << 15)
+#define ONENAND_SYS_CFG1_BRL_7		(7 << 12)
+#define ONENAND_SYS_CFG1_BRL_6		(6 << 12)
+#define ONENAND_SYS_CFG1_BRL_5		(5 << 12)
+#define ONENAND_SYS_CFG1_BRL_4		(4 << 12)
+#define ONENAND_SYS_CFG1_BRL_3		(3 << 12)
+#define ONENAND_SYS_CFG1_BRL_10		(2 << 12)
+#define ONENAND_SYS_CFG1_BRL_9		(1 << 12)
+#define ONENAND_SYS_CFG1_BRL_8		(0 << 12)
+#define ONENAND_SYS_CFG1_BRL_SHIFT	(12)
+#define ONENAND_SYS_CFG1_BL_32		(4 << 9)
+#define ONENAND_SYS_CFG1_BL_16		(3 << 9)
+#define ONENAND_SYS_CFG1_BL_8		(2 << 9)
+#define ONENAND_SYS_CFG1_BL_4		(1 << 9)
+#define ONENAND_SYS_CFG1_BL_CONT	(0 << 9)
+#define ONENAND_SYS_CFG1_BL_SHIFT	(9)
+#define ONENAND_SYS_CFG1_NO_ECC		(1 << 8)
+#define ONENAND_SYS_CFG1_RDY		(1 << 7)
+#define ONENAND_SYS_CFG1_INT		(1 << 6)
+#define ONENAND_SYS_CFG1_IOBE		(1 << 5)
+#define ONENAND_SYS_CFG1_RDY_CONF	(1 << 4)
+#define ONENAND_SYS_CFG1_VHF		(1 << 3)
+#define ONENAND_SYS_CFG1_HF		(1 << 2)
+#define ONENAND_SYS_CFG1_SYNC_WRITE	(1 << 1)
+
+/*
+ * Controller Status Register F240h (R)
+ */
+#define ONENAND_CTRL_ONGO		(1 << 15)
+#define ONENAND_CTRL_LOCK		(1 << 14)
+#define ONENAND_CTRL_LOAD		(1 << 13)
+#define ONENAND_CTRL_PROGRAM		(1 << 12)
+#define ONENAND_CTRL_ERASE		(1 << 11)
+#define ONENAND_CTRL_ERROR		(1 << 10)
+#define ONENAND_CTRL_RSTB		(1 << 7)
+#define ONENAND_CTRL_OTP_L		(1 << 6)
+#define ONENAND_CTRL_OTP_BL		(1 << 5)
+
+/*
+ * Interrupt Status Register F241h (R)
+ */
+#define ONENAND_INT_MASTER		(1 << 15)
+#define ONENAND_INT_READ		(1 << 7)
+#define ONENAND_INT_WRITE		(1 << 6)
+#define ONENAND_INT_ERASE		(1 << 5)
+#define ONENAND_INT_RESET		(1 << 4)
+#define ONENAND_INT_CLEAR		(0 << 0)
+
+/*
+ * NAND Flash Write Protection Status Register F24Eh (R)
+ */
+#define ONENAND_WP_US			(1 << 2)
+#define ONENAND_WP_LS			(1 << 1)
+#define ONENAND_WP_LTS			(1 << 0)
+
+/*
+ * ECC Status Reigser FF00h (R)
+ */
+#define ONENAND_ECC_1BIT		(1 << 0)
+#define ONENAND_ECC_1BIT_ALL		(0x5555)
+#define ONENAND_ECC_2BIT		(1 << 1)
+#define ONENAND_ECC_2BIT_ALL		(0xAAAA)
+#define FLEXONENAND_UNCORRECTABLE_ERROR	(0x1010)
+#define ONENAND_ECC_3BIT		(1 << 2)
+#define ONENAND_ECC_4BIT		(1 << 3)
+#define ONENAND_ECC_4BIT_UNCORRECTABLE	(0x1010)
+
+/*
+ * One-Time Programmable (OTP)
+ */
+#define FLEXONENAND_OTP_LOCK_OFFSET		(2048)
+#define ONENAND_OTP_LOCK_OFFSET		(14)
+
+#endif	/* __ONENAND_REG_H */
diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h
new file mode 100644
index 00000000..e4f732ae
--- /dev/null
+++ b/include/linux/mtd/partitions.h
@@ -0,0 +1,87 @@
+/*
+ * MTD partitioning layer definitions
+ *
+ * (C) 2000 Nicolas Pitre <nico@fluxnic.net>
+ *
+ * This code is GPL
+ */
+
+#ifndef MTD_PARTITIONS_H
+#define MTD_PARTITIONS_H
+
+#include <linux/types.h>
+
+
+/*
+ * Partition definition structure:
+ *
+ * An array of struct partition is passed along with a MTD object to
+ * mtd_device_register() to create them.
+ *
+ * For each partition, these fields are available:
+ * name: string that will be used to label the partition's MTD device.
+ * size: the partition size; if defined as MTDPART_SIZ_FULL, the partition
+ * 	will extend to the end of the master MTD device.
+ * offset: absolute starting position within the master MTD device; if
+ * 	defined as MTDPART_OFS_APPEND, the partition will start where the
+ *	previous one ended; if MTDPART_OFS_NXTBLK, at the next erase block;
+ *	if MTDPART_OFS_RETAIN, consume as much as possible, leaving size
+ *	after the end of partition.
+ * mask_flags: contains flags that have to be masked (removed) from the
+ * 	master MTD flag set for the corresponding MTD partition.
+ * 	For example, to force a read-only partition, simply adding
+ * 	MTD_WRITEABLE to the mask_flags will do the trick.
+ *
+ * Note: writeable partitions require their size and offset be
+ * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
+ */
+
+struct mtd_partition {
+	char *name;			/* identifier string */
+	uint64_t size;			/* partition size */
+	uint64_t offset;		/* offset within the master MTD space */
+	uint32_t mask_flags;		/* master MTD flags to mask out for this partition */
+	struct nand_ecclayout *ecclayout;	/* out of band layout for this partition (NAND only) */
+};
+
+#define MTDPART_OFS_RETAIN	(-3)
+#define MTDPART_OFS_NXTBLK	(-2)
+#define MTDPART_OFS_APPEND	(-1)
+#define MTDPART_SIZ_FULL	(0)
+
+
+struct mtd_info;
+struct device_node;
+
+/**
+ * struct mtd_part_parser_data - used to pass data to MTD partition parsers.
+ * @origin: for RedBoot, start address of MTD device
+ * @of_node: for OF parsers, device node containing partitioning information
+ */
+struct mtd_part_parser_data {
+	unsigned long origin;
+	struct device_node *of_node;
+};
+
+
+/*
+ * Functions dealing with the various ways of partitioning the space
+ */
+
+struct mtd_part_parser {
+	struct list_head list;
+	struct module *owner;
+	const char *name;
+	int (*parse_fn)(struct mtd_info *, struct mtd_partition **,
+			struct mtd_part_parser_data *);
+};
+
+extern int register_mtd_parser(struct mtd_part_parser *parser);
+extern int deregister_mtd_parser(struct mtd_part_parser *parser);
+
+int mtd_is_partition(struct mtd_info *mtd);
+int mtd_add_partition(struct mtd_info *master, char *name,
+		      long long offset, long long length);
+int mtd_del_partition(struct mtd_info *master, int partno);
+uint64_t mtd_get_device_size(struct mtd_info *mtd);
+#endif
diff --git a/include/linux/mtd/pfow.h b/include/linux/mtd/pfow.h
new file mode 100644
index 00000000..b730d4f8
--- /dev/null
+++ b/include/linux/mtd/pfow.h
@@ -0,0 +1,159 @@
+/* Primary function overlay window definitions
+ * and service functions used by LPDDR chips
+ */
+#ifndef __LINUX_MTD_PFOW_H
+#define __LINUX_MTD_PFOW_H
+
+#include <linux/mtd/qinfo.h>
+
+/* PFOW registers addressing */
+/* Address of symbol "P" */
+#define PFOW_QUERY_STRING_P			0x0000
+/* Address of symbol "F" */
+#define PFOW_QUERY_STRING_F			0x0002
+/* Address of symbol "O" */
+#define PFOW_QUERY_STRING_O			0x0004
+/* Address of symbol "W" */
+#define PFOW_QUERY_STRING_W			0x0006
+/* Identification info for LPDDR chip */
+#define PFOW_MANUFACTURER_ID			0x0020
+#define PFOW_DEVICE_ID				0x0022
+/* Address in PFOW where prog buffer can can be found */
+#define PFOW_PROGRAM_BUFFER_OFFSET		0x0040
+/* Size of program buffer in words */
+#define PFOW_PROGRAM_BUFFER_SIZE		0x0042
+/* Address command code register */
+#define PFOW_COMMAND_CODE			0x0080
+/* command data register */
+#define PFOW_COMMAND_DATA			0x0084
+/* command address register lower address bits */
+#define PFOW_COMMAND_ADDRESS_L			0x0088
+/* command address register upper address bits */
+#define PFOW_COMMAND_ADDRESS_H			0x008a
+/* number of bytes to be proggrammed lower address bits */
+#define PFOW_DATA_COUNT_L			0x0090
+/* number of bytes to be proggrammed higher address bits */
+#define PFOW_DATA_COUNT_H			0x0092
+/* command execution register, the only possible value is 0x01 */
+#define PFOW_COMMAND_EXECUTE			0x00c0
+/* 0x01 should be written at this address to clear buffer */
+#define PFOW_CLEAR_PROGRAM_BUFFER		0x00c4
+/* device program/erase suspend register */
+#define PFOW_PROGRAM_ERASE_SUSPEND		0x00c8
+/* device status register */
+#define PFOW_DSR				0x00cc
+
+/* LPDDR memory device command codes */
+/* They are possible values of PFOW command code register */
+#define LPDDR_WORD_PROGRAM		0x0041
+#define LPDDR_BUFF_PROGRAM		0x00E9
+#define LPDDR_BLOCK_ERASE		0x0020
+#define LPDDR_LOCK_BLOCK		0x0061
+#define LPDDR_UNLOCK_BLOCK		0x0062
+#define LPDDR_READ_BLOCK_LOCK_STATUS	0x0065
+#define LPDDR_INFO_QUERY		0x0098
+#define LPDDR_READ_OTP			0x0097
+#define LPDDR_PROG_OTP			0x00C0
+#define LPDDR_RESUME			0x00D0
+
+/* Defines possible value of PFOW command execution register */
+#define LPDDR_START_EXECUTION			0x0001
+
+/* Defines possible value of PFOW program/erase suspend register */
+#define LPDDR_SUSPEND				0x0001
+
+/* Possible values of PFOW device status register */
+/* access R - read; RC read & clearable */
+#define DSR_DPS			(1<<1) /* RC; device protect status
+					* 0 - not protected 1 - locked */
+#define DSR_PSS			(1<<2) /* R; program suspend status;
+					* 0-prog in progress/completed,
+					* 1- prog suspended */
+#define DSR_VPPS		(1<<3) /* RC; 0-Vpp OK, * 1-Vpp low */
+#define DSR_PROGRAM_STATUS	(1<<4) /* RC; 0-successful, 1-error */
+#define DSR_ERASE_STATUS	(1<<5) /* RC; erase or blank check status;
+					* 0-success erase/blank check,
+					* 1 blank check error */
+#define DSR_ESS			(1<<6) /* R; erase suspend status;
+					* 0-erase in progress/complete,
+					* 1 erase suspended */
+#define DSR_READY_STATUS	(1<<7) /* R; Device status
+					* 0-busy,
+					* 1-ready */
+#define DSR_RPS			(0x3<<8) /* RC;  region program status
+					* 00 - Success,
+					* 01-re-program attempt in region with
+					* object mode data,
+					* 10-object mode program w attempt in
+					* region with control mode data
+					* 11-attempt to program invalid half
+					* with 0x41 command */
+#define DSR_AOS			(1<<12) /* RC; 1- AO related failure */
+#define DSR_AVAILABLE		(1<<15) /* R; Device availbility
+					* 1 - Device available
+					* 0 - not available */
+
+/* The superset of all possible error bits in DSR */
+#define DSR_ERR			0x133A
+
+static inline void send_pfow_command(struct map_info *map,
+				unsigned long cmd_code, unsigned long adr,
+				unsigned long len, map_word *datum)
+{
+	int bits_per_chip = map_bankwidth(map) * 8;
+	int chipnum;
+	struct lpddr_private *lpddr = map->fldrv_priv;
+	chipnum = adr >> lpddr->chipshift;
+
+	map_write(map, CMD(cmd_code), map->pfow_base + PFOW_COMMAND_CODE);
+	map_write(map, CMD(adr & ((1<<bits_per_chip) - 1)),
+				map->pfow_base + PFOW_COMMAND_ADDRESS_L);
+	map_write(map, CMD(adr>>bits_per_chip),
+				map->pfow_base + PFOW_COMMAND_ADDRESS_H);
+	if (len) {
+		map_write(map, CMD(len & ((1<<bits_per_chip) - 1)),
+					map->pfow_base + PFOW_DATA_COUNT_L);
+		map_write(map, CMD(len>>bits_per_chip),
+					map->pfow_base + PFOW_DATA_COUNT_H);
+	}
+	if (datum)
+		map_write(map, *datum, map->pfow_base + PFOW_COMMAND_DATA);
+
+	/* Command execution start */
+	map_write(map, CMD(LPDDR_START_EXECUTION),
+			map->pfow_base + PFOW_COMMAND_EXECUTE);
+}
+
+static inline void print_drs_error(unsigned dsr)
+{
+	int prog_status = (dsr & DSR_RPS) >> 8;
+
+	if (!(dsr & DSR_AVAILABLE))
+		printk(KERN_NOTICE"DSR.15: (0) Device not Available\n");
+	if (prog_status & 0x03)
+		printk(KERN_NOTICE"DSR.9,8: (11) Attempt to program invalid "
+						"half with 41h command\n");
+	else if (prog_status & 0x02)
+		printk(KERN_NOTICE"DSR.9,8: (10) Object Mode Program attempt "
+					"in region with Control Mode data\n");
+	else if (prog_status &  0x01)
+		printk(KERN_NOTICE"DSR.9,8: (01) Program attempt in region "
+						"with Object Mode data\n");
+	if (!(dsr & DSR_READY_STATUS))
+		printk(KERN_NOTICE"DSR.7: (0) Device is Busy\n");
+	if (dsr & DSR_ESS)
+		printk(KERN_NOTICE"DSR.6: (1) Erase Suspended\n");
+	if (dsr & DSR_ERASE_STATUS)
+		printk(KERN_NOTICE"DSR.5: (1) Erase/Blank check error\n");
+	if (dsr & DSR_PROGRAM_STATUS)
+		printk(KERN_NOTICE"DSR.4: (1) Program Error\n");
+	if (dsr & DSR_VPPS)
+		printk(KERN_NOTICE"DSR.3: (1) Vpp low detect, operation "
+					"aborted\n");
+	if (dsr & DSR_PSS)
+		printk(KERN_NOTICE"DSR.2: (1) Program suspended\n");
+	if (dsr & DSR_DPS)
+		printk(KERN_NOTICE"DSR.1: (1) Aborted Erase/Program attempt "
+					"on locked block\n");
+}
+#endif /* __LINUX_MTD_PFOW_H */
diff --git a/include/linux/mtd/physmap.h b/include/linux/mtd/physmap.h
new file mode 100644
index 00000000..d2887e76
--- /dev/null
+++ b/include/linux/mtd/physmap.h
@@ -0,0 +1,36 @@
+/*
+ * For boards with physically mapped flash and using
+ * drivers/mtd/maps/physmap.c mapping driver.
+ *
+ * Copyright (C) 2003 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __LINUX_MTD_PHYSMAP__
+#define __LINUX_MTD_PHYSMAP__
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+struct map_info;
+struct platform_device;
+
+struct physmap_flash_data {
+	unsigned int		width;
+	int			(*init)(struct platform_device *);
+	void			(*exit)(struct platform_device *);
+	void			(*set_vpp)(struct platform_device *, int);
+	unsigned int		nr_parts;
+	unsigned int		pfow_base;
+	char                    *probe_type;
+	struct mtd_partition	*parts;
+	const char		**part_probe_types;
+};
+
+#endif /* __LINUX_MTD_PHYSMAP__ */
diff --git a/include/linux/mtd/pismo.h b/include/linux/mtd/pismo.h
new file mode 100644
index 00000000..8dfb7e14
--- /dev/null
+++ b/include/linux/mtd/pismo.h
@@ -0,0 +1,17 @@
+/*
+ * PISMO memory driver - http://www.pismoworld.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+#ifndef __LINUX_MTD_PISMO_H
+#define __LINUX_MTD_PISMO_H
+
+struct pismo_pdata {
+	void			(*set_vpp)(void *, int);
+	void			*vpp_data;
+	phys_addr_t		cs_addrs[5];
+};
+
+#endif
diff --git a/include/linux/mtd/plat-ram.h b/include/linux/mtd/plat-ram.h
new file mode 100644
index 00000000..e07890af
--- /dev/null
+++ b/include/linux/mtd/plat-ram.h
@@ -0,0 +1,34 @@
+/* linux/include/linux/mtd/plat-ram.h
+ *
+ * (c) 2004 Simtec Electronics
+ *	http://www.simtec.co.uk/products/SWLINUX/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Generic platform device based RAM map
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __LINUX_MTD_PLATRAM_H
+#define __LINUX_MTD_PLATRAM_H __FILE__
+
+#define PLATRAM_RO (0)
+#define PLATRAM_RW (1)
+
+struct platdata_mtd_ram {
+	const char		*mapname;
+	const char		**map_probes;
+	const char		**probes;
+	struct mtd_partition	*partitions;
+	int			 nr_partitions;
+	int			 bankwidth;
+
+	/* control callbacks */
+
+	void	(*set_rw)(struct device *dev, int to);
+};
+
+#endif /* __LINUX_MTD_PLATRAM_H */
diff --git a/include/linux/mtd/qinfo.h b/include/linux/mtd/qinfo.h
new file mode 100644
index 00000000..7b3d487d
--- /dev/null
+++ b/include/linux/mtd/qinfo.h
@@ -0,0 +1,91 @@
+#ifndef __LINUX_MTD_QINFO_H
+#define __LINUX_MTD_QINFO_H
+
+#include <linux/mtd/map.h>
+#include <linux/wait.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/flashchip.h>
+#include <linux/mtd/partitions.h>
+
+/* lpddr_private describes lpddr flash chip in memory map
+ * @ManufactId - Chip Manufacture ID
+ * @DevId - Chip Device ID
+ * @qinfo - pointer to qinfo records describing the chip
+ * @numchips - number of chips including virual RWW partitions
+ * @chipshift - Chip/partiton size 2^chipshift
+ * @chips - per-chip data structure
+ */
+struct lpddr_private {
+	uint16_t ManufactId;
+	uint16_t DevId;
+	struct qinfo_chip *qinfo;
+	int numchips;
+	unsigned long chipshift;
+	struct flchip chips[0];
+};
+
+/* qinfo_query_info structure contains request information for
+ * each qinfo record
+ * @major - major number of qinfo record
+ * @major - minor number of qinfo record
+ * @id_str - descriptive string to access the record
+ * @desc - detailed description for the qinfo record
+ */
+struct qinfo_query_info {
+	uint8_t	major;
+	uint8_t	minor;
+	char *id_str;
+	char *desc;
+};
+
+/*
+ * qinfo_chip structure contains necessary qinfo records data
+ * @DevSizeShift - Device size 2^n bytes
+ * @BufSizeShift - Program buffer size 2^n bytes
+ * @TotalBlocksNum - Total number of blocks
+ * @UniformBlockSizeShift - Uniform block size 2^UniformBlockSizeShift bytes
+ * @HWPartsNum - Number of hardware partitions
+ * @SuspEraseSupp - Suspend erase supported
+ * @SingleWordProgTime - Single word program 2^SingleWordProgTime u-sec
+ * @ProgBufferTime - Program buffer write 2^ProgBufferTime u-sec
+ * @BlockEraseTime - Block erase 2^BlockEraseTime m-sec
+ */
+struct qinfo_chip {
+	/* General device info */
+	uint16_t DevSizeShift;
+	uint16_t BufSizeShift;
+	/* Erase block information */
+	uint16_t TotalBlocksNum;
+	uint16_t UniformBlockSizeShift;
+	/* Partition information */
+	uint16_t HWPartsNum;
+	/* Optional features */
+	uint16_t SuspEraseSupp;
+	/* Operation typical time */
+	uint16_t SingleWordProgTime;
+	uint16_t ProgBufferTime;
+	uint16_t BlockEraseTime;
+};
+
+/* defines for fixup usage */
+#define LPDDR_MFR_ANY		0xffff
+#define LPDDR_ID_ANY		0xffff
+#define NUMONYX_MFGR_ID		0x0089
+#define R18_DEVICE_ID_1G	0x893c
+
+static inline map_word lpddr_build_cmd(u_long cmd, struct map_info *map)
+{
+	map_word val = { {0} };
+	val.x[0] = cmd;
+	return val;
+}
+
+#define CMD(x) lpddr_build_cmd(x, map)
+#define CMDVAL(cmd) cmd.x[0]
+
+struct mtd_info *lpddr_cmdset(struct map_info *);
+
+#endif
+
diff --git a/include/linux/mtd/sh_flctl.h b/include/linux/mtd/sh_flctl.h
new file mode 100644
index 00000000..a38e1fa8
--- /dev/null
+++ b/include/linux/mtd/sh_flctl.h
@@ -0,0 +1,171 @@
+/*
+ * SuperH FLCTL nand controller
+ *
+ * Copyright © 2008 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __SH_FLCTL_H__
+#define __SH_FLCTL_H__
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/pm_qos.h>
+
+/* FLCTL registers */
+#define FLCMNCR(f)		(f->reg + 0x0)
+#define FLCMDCR(f)		(f->reg + 0x4)
+#define FLCMCDR(f)		(f->reg + 0x8)
+#define FLADR(f)		(f->reg + 0xC)
+#define FLADR2(f)		(f->reg + 0x3C)
+#define FLDATAR(f)		(f->reg + 0x10)
+#define FLDTCNTR(f)		(f->reg + 0x14)
+#define FLINTDMACR(f)		(f->reg + 0x18)
+#define FLBSYTMR(f)		(f->reg + 0x1C)
+#define FLBSYCNT(f)		(f->reg + 0x20)
+#define FLDTFIFO(f)		(f->reg + 0x24)
+#define FLECFIFO(f)		(f->reg + 0x28)
+#define FLTRCR(f)		(f->reg + 0x2C)
+#define FLHOLDCR(f)		(f->reg + 0x38)
+#define	FL4ECCRESULT0(f)	(f->reg + 0x80)
+#define	FL4ECCRESULT1(f)	(f->reg + 0x84)
+#define	FL4ECCRESULT2(f)	(f->reg + 0x88)
+#define	FL4ECCRESULT3(f)	(f->reg + 0x8C)
+#define	FL4ECCCR(f)		(f->reg + 0x90)
+#define	FL4ECCCNT(f)		(f->reg + 0x94)
+#define	FLERRADR(f)		(f->reg + 0x98)
+
+/* FLCMNCR control bits */
+#define ECCPOS2		(0x1 << 25)
+#define _4ECCCNTEN	(0x1 << 24)
+#define _4ECCEN		(0x1 << 23)
+#define _4ECCCORRECT	(0x1 << 22)
+#define SHBUSSEL	(0x1 << 20)
+#define SEL_16BIT	(0x1 << 19)
+#define SNAND_E		(0x1 << 18)	/* SNAND (0=512 1=2048)*/
+#define QTSEL_E		(0x1 << 17)
+#define ENDIAN		(0x1 << 16)	/* 1 = little endian */
+#define FCKSEL_E	(0x1 << 15)
+#define ECCPOS_00	(0x00 << 12)
+#define ECCPOS_01	(0x01 << 12)
+#define ECCPOS_02	(0x02 << 12)
+#define ACM_SACCES_MODE	(0x01 << 10)
+#define NANWF_E		(0x1 << 9)
+#define SE_D		(0x1 << 8)	/* Spare area disable */
+#define	CE1_ENABLE	(0x1 << 4)	/* Chip Enable 1 */
+#define	CE0_ENABLE	(0x1 << 3)	/* Chip Enable 0 */
+#define	TYPESEL_SET	(0x1 << 0)
+
+/*
+ * Clock settings using the PULSEx registers from FLCMNCR
+ *
+ * Some hardware uses bits called PULSEx instead of FCKSEL_E and QTSEL_E
+ * to control the clock divider used between the High-Speed Peripheral Clock
+ * and the FLCTL internal clock. If so, use CLK_8_BIT_xxx for connecting 8 bit
+ * and CLK_16_BIT_xxx for connecting 16 bit bus bandwith NAND chips. For the 16
+ * bit version the divider is seperate for the pulse width of high and low
+ * signals.
+ */
+#define PULSE3	(0x1 << 27)
+#define PULSE2	(0x1 << 17)
+#define PULSE1	(0x1 << 15)
+#define PULSE0	(0x1 << 9)
+#define CLK_8B_0_5			PULSE1
+#define CLK_8B_1			0x0
+#define CLK_8B_1_5			(PULSE1 | PULSE2)
+#define CLK_8B_2			PULSE0
+#define CLK_8B_3			(PULSE0 | PULSE1 | PULSE2)
+#define CLK_8B_4			(PULSE0 | PULSE2)
+#define CLK_16B_6L_2H			PULSE0
+#define CLK_16B_9L_3H			(PULSE0 | PULSE1 | PULSE2)
+#define CLK_16B_12L_4H			(PULSE0 | PULSE2)
+
+/* FLCMDCR control bits */
+#define ADRCNT2_E	(0x1 << 31)	/* 5byte address enable */
+#define ADRMD_E		(0x1 << 26)	/* Sector address access */
+#define CDSRC_E		(0x1 << 25)	/* Data buffer selection */
+#define DOSR_E		(0x1 << 24)	/* Status read check */
+#define SELRW		(0x1 << 21)	/*  0:read 1:write */
+#define DOADR_E		(0x1 << 20)	/* Address stage execute */
+#define ADRCNT_1	(0x00 << 18)	/* Address data bytes: 1byte */
+#define ADRCNT_2	(0x01 << 18)	/* Address data bytes: 2byte */
+#define ADRCNT_3	(0x02 << 18)	/* Address data bytes: 3byte */
+#define ADRCNT_4	(0x03 << 18)	/* Address data bytes: 4byte */
+#define DOCMD2_E	(0x1 << 17)	/* 2nd cmd stage execute */
+#define DOCMD1_E	(0x1 << 16)	/* 1st cmd stage execute */
+
+/* FLTRCR control bits */
+#define TRSTRT		(0x1 << 0)	/* translation start */
+#define TREND		(0x1 << 1)	/* translation end */
+
+/*
+ * FLHOLDCR control bits
+ *
+ * HOLDEN: Bus Occupancy Enable (inverted)
+ * Enable this bit when the external bus might be used in between transfers.
+ * If not set and the bus gets used by other modules, a deadlock occurs.
+ */
+#define HOLDEN		(0x1 << 0)
+
+/* FL4ECCCR control bits */
+#define	_4ECCFA		(0x1 << 2)	/* 4 symbols correct fault */
+#define	_4ECCEND	(0x1 << 1)	/* 4 symbols end */
+#define	_4ECCEXST	(0x1 << 0)	/* 4 symbols exist */
+
+#define INIT_FL4ECCRESULT_VAL	0x03FF03FF
+#define LOOP_TIMEOUT_MAX	0x00010000
+
+struct sh_flctl {
+	struct mtd_info		mtd;
+	struct nand_chip	chip;
+	struct platform_device	*pdev;
+	struct dev_pm_qos_request pm_qos;
+	void __iomem		*reg;
+
+	uint8_t	done_buff[2048 + 64];	/* max size 2048 + 64 */
+	int	read_bytes;
+	int	index;
+	int	seqin_column;		/* column in SEQIN cmd */
+	int	seqin_page_addr;	/* page_addr in SEQIN cmd */
+	uint32_t seqin_read_cmd;		/* read cmd in SEQIN cmd */
+	int	erase1_page_addr;	/* page_addr in ERASE1 cmd */
+	uint32_t erase_ADRCNT;		/* bits of FLCMDCR in ERASE1 cmd */
+	uint32_t rw_ADRCNT;	/* bits of FLCMDCR in READ WRITE cmd */
+	uint32_t flcmncr_base;	/* base value of FLCMNCR */
+
+	int	hwecc_cant_correct[4];
+
+	unsigned page_size:1;	/* NAND page size (0 = 512, 1 = 2048) */
+	unsigned hwecc:1;	/* Hardware ECC (0 = disabled, 1 = enabled) */
+	unsigned holden:1;	/* Hardware has FLHOLDCR and HOLDEN is set */
+	unsigned qos_request:1;	/* QoS request to prevent deep power shutdown */
+};
+
+struct sh_flctl_platform_data {
+	struct mtd_partition	*parts;
+	int			nr_parts;
+	unsigned long		flcmncr_val;
+
+	unsigned has_hwecc:1;
+	unsigned use_holden:1;
+};
+
+static inline struct sh_flctl *mtd_to_flctl(struct mtd_info *mtdinfo)
+{
+	return container_of(mtdinfo, struct sh_flctl, mtd);
+}
+
+#endif	/* __SH_FLCTL_H__ */
diff --git a/include/linux/mtd/sharpsl.h b/include/linux/mtd/sharpsl.h
new file mode 100644
index 00000000..25f4d2a8
--- /dev/null
+++ b/include/linux/mtd/sharpsl.h
@@ -0,0 +1,20 @@
+/*
+ * SharpSL NAND support
+ *
+ * Copyright (C) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+struct sharpsl_nand_platform_data {
+	struct nand_bbt_descr	*badblock_pattern;
+	struct nand_ecclayout	*ecc_layout;
+	struct mtd_partition	*partitions;
+	unsigned int		nr_partitions;
+};
diff --git a/include/linux/mtd/spear_smi.h b/include/linux/mtd/spear_smi.h
new file mode 100644
index 00000000..8ae17260
--- /dev/null
+++ b/include/linux/mtd/spear_smi.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright © 2010 ST Microelectronics
+ * Shiraz Hashim <shiraz.hashim@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MTD_SPEAR_SMI_H
+#define __MTD_SPEAR_SMI_H
+
+#include <linux/types.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+
+/* max possible slots for serial-nor flash chip in the SMI controller */
+#define MAX_NUM_FLASH_CHIP	4
+
+/* macro to define partitions for flash devices */
+#define DEFINE_PARTS(n, of, s)		\
+{					\
+	.name = n,			\
+	.offset = of,			\
+	.size = s,			\
+}
+
+/**
+ * struct spear_smi_flash_info - platform structure for passing flash
+ * information
+ *
+ * name: name of the serial nor flash for identification
+ * mem_base: the memory base on which the flash is mapped
+ * size: size of the flash in bytes
+ * partitions: parition details
+ * nr_partitions: number of partitions
+ * fast_mode: whether flash supports fast mode
+ */
+
+struct spear_smi_flash_info {
+	char *name;
+	unsigned long mem_base;
+	unsigned long size;
+	struct mtd_partition *partitions;
+	int nr_partitions;
+	u8 fast_mode;
+};
+
+/**
+ * struct spear_smi_plat_data - platform structure for configuring smi
+ *
+ * clk_rate: clk rate at which SMI must operate
+ * num_flashes: number of flashes present on board
+ * board_flash_info: specific details of each flash present on board
+ */
+struct spear_smi_plat_data {
+	unsigned long clk_rate;
+	int num_flashes;
+	struct spear_smi_flash_info *board_flash_info;
+	struct device_node *np[MAX_NUM_FLASH_CHIP];
+};
+
+#endif /* __MTD_SPEAR_SMI_H */
diff --git a/include/linux/mtd/super.h b/include/linux/mtd/super.h
new file mode 100644
index 00000000..f456230f
--- /dev/null
+++ b/include/linux/mtd/super.h
@@ -0,0 +1,29 @@
+/* MTD-based superblock handling
+ *
+ * Copyright © 2006 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __MTD_SUPER_H__
+#define __MTD_SUPER_H__
+
+#ifdef __KERNEL__
+
+#include <linux/mtd/mtd.h>
+#include <linux/fs.h>
+#include <linux/mount.h>
+
+extern struct dentry *mount_mtd(struct file_system_type *fs_type, int flags,
+		      const char *dev_name, void *data,
+		      int (*fill_super)(struct super_block *, void *, int));
+extern void kill_mtd_super(struct super_block *sb);
+
+
+#endif /* __KERNEL__ */
+
+#endif /* __MTD_SUPER_H__ */
diff --git a/include/linux/mtd/ubi.h b/include/linux/mtd/ubi.h
new file mode 100644
index 00000000..c2e92b36
--- /dev/null
+++ b/include/linux/mtd/ubi.h
@@ -0,0 +1,265 @@
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Artem Bityutskiy (Битюцкий Артём)
+ */
+
+#ifndef __LINUX_UBI_H__
+#define __LINUX_UBI_H__
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+#include <mtd/ubi-user.h>
+
+
+#define UBI_ALL -1
+/*
+ * enum ubi_open_mode - UBI volume open mode constants.
+ *
+ * UBI_READONLY: read-only mode
+ * UBI_READWRITE: read-write mode
+ * UBI_EXCLUSIVE: exclusive mode
+ */
+enum {
+	UBI_READONLY = 1,
+	UBI_READWRITE,
+	UBI_EXCLUSIVE
+};
+
+/**
+ * struct ubi_volume_info - UBI volume description data structure.
+ * @vol_id: volume ID
+ * @ubi_num: UBI device number this volume belongs to
+ * @size: how many physical eraseblocks are reserved for this volume
+ * @used_bytes: how many bytes of data this volume contains
+ * @used_ebs: how many physical eraseblocks of this volume actually contain any
+ *            data
+ * @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
+ * @corrupted: non-zero if the volume is corrupted (static volumes only)
+ * @upd_marker: non-zero if the volume has update marker set
+ * @alignment: volume alignment
+ * @usable_leb_size: how many bytes are available in logical eraseblocks of
+ *                   this volume
+ * @name_len: volume name length
+ * @name: volume name
+ * @cdev: UBI volume character device major and minor numbers
+ *
+ * The @corrupted flag is only relevant to static volumes and is always zero
+ * for dynamic ones. This is because UBI does not care about dynamic volume
+ * data protection and only cares about protecting static volume data.
+ *
+ * The @upd_marker flag is set if the volume update operation was interrupted.
+ * Before touching the volume data during the update operation, UBI first sets
+ * the update marker flag for this volume. If the volume update operation was
+ * further interrupted, the update marker indicates this. If the update marker
+ * is set, the contents of the volume is certainly damaged and a new volume
+ * update operation has to be started.
+ *
+ * To put it differently, @corrupted and @upd_marker fields have different
+ * semantics:
+ *     o the @corrupted flag means that this static volume is corrupted for some
+ *       reasons, but not because an interrupted volume update
+ *     o the @upd_marker field means that the volume is damaged because of an
+ *       interrupted update operation.
+ *
+ * I.e., the @corrupted flag is never set if the @upd_marker flag is set.
+ *
+ * The @used_bytes and @used_ebs fields are only really needed for static
+ * volumes and contain the number of bytes stored in this static volume and how
+ * many eraseblock this data occupies. In case of dynamic volumes, the
+ * @used_bytes field is equivalent to @size*@usable_leb_size, and the @used_ebs
+ * field is equivalent to @size.
+ *
+ * In general, logical eraseblock size is a property of the UBI device, not
+ * of the UBI volume. Indeed, the logical eraseblock size depends on the
+ * physical eraseblock size and on how much bytes UBI headers consume. But
+ * because of the volume alignment (@alignment), the usable size of logical
+ * eraseblocks if a volume may be less. The following equation is true:
+ *	@usable_leb_size = LEB size - (LEB size mod @alignment),
+ * where LEB size is the logical eraseblock size defined by the UBI device.
+ *
+ * The alignment is multiple to the minimal flash input/output unit size or %1
+ * if all the available space is used.
+ *
+ * To put this differently, alignment may be considered is a way to change
+ * volume logical eraseblock sizes.
+ */
+struct ubi_volume_info {
+	int ubi_num;
+	int vol_id;
+	int size;
+	long long used_bytes;
+	int used_ebs;
+	int vol_type;
+	int corrupted;
+	int upd_marker;
+	int alignment;
+	int usable_leb_size;
+	int name_len;
+	const char *name;
+	dev_t cdev;
+};
+
+/**
+ * struct ubi_device_info - UBI device description data structure.
+ * @ubi_num: ubi device number
+ * @leb_size: logical eraseblock size on this UBI device
+ * @leb_start: starting offset of logical eraseblocks within physical
+ *             eraseblocks
+ * @min_io_size: minimal I/O unit size
+ * @max_write_size: maximum amount of bytes the underlying flash can write at a
+ *                  time (MTD write buffer size)
+ * @ro_mode: if this device is in read-only mode
+ * @cdev: UBI character device major and minor numbers
+ *
+ * Note, @leb_size is the logical eraseblock size offered by the UBI device.
+ * Volumes of this UBI device may have smaller logical eraseblock size if their
+ * alignment is not equivalent to %1.
+ *
+ * The @max_write_size field describes flash write maximum write unit. For
+ * example, NOR flash allows for changing individual bytes, so @min_io_size is
+ * %1. However, it does not mean than NOR flash has to write data byte-by-byte.
+ * Instead, CFI NOR flashes have a write-buffer of, e.g., 64 bytes, and when
+ * writing large chunks of data, they write 64-bytes at a time. Obviously, this
+ * improves write throughput.
+ *
+ * Also, the MTD device may have N interleaved (striped) flash chips
+ * underneath, in which case @min_io_size can be physical min. I/O size of
+ * single flash chip, while @max_write_size can be N * @min_io_size.
+ *
+ * The @max_write_size field is always greater or equivalent to @min_io_size.
+ * E.g., some NOR flashes may have (@min_io_size = 1, @max_write_size = 64). In
+ * contrast, NAND flashes usually have @min_io_size = @max_write_size = NAND
+ * page size.
+ */
+struct ubi_device_info {
+	int ubi_num;
+	int leb_size;
+	int leb_start;
+	int min_io_size;
+	int max_write_size;
+	int ro_mode;
+	dev_t cdev;
+};
+
+/*
+ * Volume notification types.
+ * @UBI_VOLUME_ADDED: a volume has been added (an UBI device was attached or a
+ *                    volume was created)
+ * @UBI_VOLUME_REMOVED: a volume has been removed (an UBI device was detached
+ *			or a volume was removed)
+ * @UBI_VOLUME_RESIZED: a volume has been re-sized
+ * @UBI_VOLUME_RENAMED: a volume has been re-named
+ * @UBI_VOLUME_UPDATED: data has been written to a volume
+ *
+ * These constants define which type of event has happened when a volume
+ * notification function is invoked.
+ */
+enum {
+	UBI_VOLUME_ADDED,
+	UBI_VOLUME_REMOVED,
+	UBI_VOLUME_RESIZED,
+	UBI_VOLUME_RENAMED,
+	UBI_VOLUME_UPDATED,
+};
+
+/*
+ * struct ubi_notification - UBI notification description structure.
+ * @di: UBI device description object
+ * @vi: UBI volume description object
+ *
+ * UBI notifiers are called with a pointer to an object of this type. The
+ * object describes the notification. Namely, it provides a description of the
+ * UBI device and UBI volume the notification informs about.
+ */
+struct ubi_notification {
+	struct ubi_device_info di;
+	struct ubi_volume_info vi;
+};
+
+/* UBI descriptor given to users when they open UBI volumes */
+struct ubi_volume_desc;
+
+int ubi_get_device_info(int ubi_num, struct ubi_device_info *di);
+void ubi_get_volume_info(struct ubi_volume_desc *desc,
+			 struct ubi_volume_info *vi);
+struct ubi_volume_desc *ubi_open_volume(int ubi_num, int vol_id, int mode);
+struct ubi_volume_desc *ubi_open_volume_nm(int ubi_num, const char *name,
+					   int mode);
+
+void ubi_update_volume(struct ubi_volume_desc *desc);
+
+struct ubi_volume_desc *ubi_open_volume_path(const char *pathname, int mode);
+
+int ubi_register_volume_notifier(struct notifier_block *nb,
+				 int ignore_existing);
+int ubi_unregister_volume_notifier(struct notifier_block *nb);
+
+void ubi_close_volume(struct ubi_volume_desc *desc);
+void ubi_set_volume(struct ubi_volume_desc *desc);
+
+int ubi_leb_read(struct ubi_volume_desc *desc, int lnum, char *buf, int offset,
+		 int len, int check);
+int ubi_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf,
+		  int offset, int len);
+
+int ubi_leb_read_oob(struct ubi_volume_desc *desc, int lnum, void *buf, int offset,
+		int len, void *spare);
+
+int ubi_leb_write_oob(struct ubi_volume_desc *desc, int lnum, const void *buf, int offset, 
+		int len, void *spare, int dtype);
+
+int ubi_leb_change(struct ubi_volume_desc *desc, int lnum, const void *buf,
+		   int len);
+int ubi_leb_erase(struct ubi_volume_desc *desc, int lnum);
+int ubi_leb_unmap(struct ubi_volume_desc *desc, int lnum);
+int ubi_leb_map(struct ubi_volume_desc *desc, int lnum);
+int ubi_is_mapped(struct ubi_volume_desc *desc, int lnum);
+int ubi_sync(int ubi_num);
+int ubi_flush(int ubi_num, int vol_id, int lnum);
+
+/*
+ * This function is the same as the 'ubi_leb_read()' function, but it does not
+ * provide the checking capability.
+ */
+static inline int ubi_read(struct ubi_volume_desc *desc, int lnum, char *buf,
+			   int offset, int len)
+{
+	return ubi_leb_read(desc, lnum, buf, offset, len, 0);
+}
+
+/*
+ * This function is the same as the 'ubi_leb_write()' functions, but it does
+ * not have the data type argument.
+ */
+static inline int ubi_write(struct ubi_volume_desc *desc, int lnum,
+			    const void *buf, int offset, int len)
+{
+	return ubi_leb_write(desc, lnum, buf, offset, len);
+}
+
+/*
+ * This function is the same as the 'ubi_leb_change()' functions, but it does
+ * not have the data type argument.
+ */
+static inline int ubi_change(struct ubi_volume_desc *desc, int lnum,
+				    const void *buf, int len)
+{
+	return ubi_leb_change(desc, lnum, buf, len);
+}
+
+#endif /* !__LINUX_UBI_H__ */
diff --git a/include/linux/mtd/xip.h b/include/linux/mtd/xip.h
new file mode 100644
index 00000000..abed4dec
--- /dev/null
+++ b/include/linux/mtd/xip.h
@@ -0,0 +1,99 @@
+/*
+ * MTD primitives for XIP support
+ *
+ * Author:	Nicolas Pitre
+ * Created:	Nov 2, 2004
+ * Copyright:	(C) 2004 MontaVista Software, Inc.
+ *
+ * This XIP support for MTD has been loosely inspired
+ * by an earlier patch authored by David Woodhouse.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_MTD_XIP_H__
+#define __LINUX_MTD_XIP_H__
+
+
+#ifdef CONFIG_MTD_XIP
+
+/*
+ * We really don't want gcc to guess anything.
+ * We absolutely _need_ proper inlining.
+ */
+#include <linux/compiler.h>
+
+/*
+ * Function that are modifying the flash state away from array mode must
+ * obviously not be running from flash.  The __xipram is therefore marking
+ * those functions so they get relocated to ram.
+ */
+#define __xipram noinline __attribute__ ((__section__ (".data")))
+
+/*
+ * Each architecture has to provide the following macros.  They must access
+ * the hardware directly and not rely on any other (XIP) functions since they
+ * won't be available when used (flash not in array mode).
+ *
+ * xip_irqpending()
+ *
+ * 	return non zero when any hardware interrupt is pending.
+ *
+ * xip_currtime()
+ *
+ * 	return a platform specific time reference to be used with
+ * 	xip_elapsed_since().
+ *
+ * xip_elapsed_since(x)
+ *
+ * 	return in usecs the elapsed timebetween now and the reference x as
+ * 	returned by xip_currtime().
+ *
+ * 	note 1: conversion to usec can be approximated, as long as the
+ * 		returned value is <= the real elapsed time.
+ * 	note 2: this should be able to cope with a few seconds without
+ * 		overflowing.
+ *
+ * xip_iprefetch()
+ *
+ *      Macro to fill instruction prefetch
+ *	e.g. a series of nops:  asm volatile (".rep 8; nop; .endr");
+ */
+
+#include <asm/mtd-xip.h>
+
+#ifndef xip_irqpending
+
+#warning "missing IRQ and timer primitives for XIP MTD support"
+#warning "some of the XIP MTD support code will be disabled"
+#warning "your system will therefore be unresponsive when writing or erasing flash"
+
+#define xip_irqpending()	(0)
+#define xip_currtime()		(0)
+#define xip_elapsed_since(x)	(0)
+
+#endif
+
+#ifndef xip_iprefetch
+#define xip_iprefetch()		do { } while (0)
+#endif
+
+/*
+ * xip_cpu_idle() is used when waiting for a delay equal or larger than
+ * the system timer tick period.  This should put the CPU into idle mode
+ * to save power and to be woken up only when some interrupts are pending.
+ * This should not rely upon standard kernel code.
+ */
+#ifndef xip_cpu_idle
+#define xip_cpu_idle()  do { } while (0)
+#endif
+
+#else
+
+#define __xipram
+
+#endif /* CONFIG_MTD_XIP */
+
+#endif /* __LINUX_MTD_XIP_H__ */
diff --git a/include/linux/mtio.h b/include/linux/mtio.h
new file mode 100644
index 00000000..18543e2d
--- /dev/null
+++ b/include/linux/mtio.h
@@ -0,0 +1,208 @@
+/* 
+ * linux/mtio.h header file for Linux. Written by H. Bergman
+ *
+ * Modified for special ioctls provided by zftape in September 1997
+ * by C.-J. Heine.
+ */
+
+#ifndef _LINUX_MTIO_H
+#define _LINUX_MTIO_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+/*
+ * Structures and definitions for mag tape io control commands
+ */
+
+/* structure for MTIOCTOP - mag tape op command */
+struct	mtop {
+	short	mt_op;		/* operations defined below */
+	int	mt_count;	/* how many of them */
+};
+
+/* Magnetic Tape operations [Not all operations supported by all drivers]: */
+#define MTRESET 0	/* +reset drive in case of problems */
+#define MTFSF	1	/* forward space over FileMark,
+			 * position at first record of next file 
+			 */
+#define MTBSF	2	/* backward space FileMark (position before FM) */
+#define MTFSR	3	/* forward space record */
+#define MTBSR	4	/* backward space record */
+#define MTWEOF	5	/* write an end-of-file record (mark) */
+#define MTREW	6	/* rewind */
+#define MTOFFL	7	/* rewind and put the drive offline (eject?) */
+#define MTNOP	8	/* no op, set status only (read with MTIOCGET) */
+#define MTRETEN 9	/* retension tape */
+#define MTBSFM	10	/* +backward space FileMark, position at FM */
+#define MTFSFM  11	/* +forward space FileMark, position at FM */
+#define MTEOM	12	/* goto end of recorded media (for appending files).
+			 * MTEOM positions after the last FM, ready for
+			 * appending another file.
+			 */
+#define MTERASE 13	/* erase tape -- be careful! */
+
+#define MTRAS1  14	/* run self test 1 (nondestructive) */
+#define MTRAS2	15	/* run self test 2 (destructive) */
+#define MTRAS3  16	/* reserved for self test 3 */
+
+#define MTSETBLK 20	/* set block length (SCSI) */
+#define MTSETDENSITY 21	/* set tape density (SCSI) */
+#define MTSEEK	22	/* seek to block (Tandberg, etc.) */
+#define MTTELL	23	/* tell block (Tandberg, etc.) */
+#define MTSETDRVBUFFER 24 /* set the drive buffering according to SCSI-2 */
+			/* ordinary buffered operation with code 1 */
+#define MTFSS	25	/* space forward over setmarks */
+#define MTBSS	26	/* space backward over setmarks */
+#define MTWSM	27	/* write setmarks */
+
+#define MTLOCK  28	/* lock the drive door */
+#define MTUNLOCK 29	/* unlock the drive door */
+#define MTLOAD  30	/* execute the SCSI load command */
+#define MTUNLOAD 31	/* execute the SCSI unload command */
+#define MTCOMPRESSION 32/* control compression with SCSI mode page 15 */
+#define MTSETPART 33	/* Change the active tape partition */
+#define MTMKPART  34	/* Format the tape with one or two partitions */
+#define MTWEOFI	35	/* write an end-of-file record (mark) in immediate mode */
+
+/* structure for MTIOCGET - mag tape get status command */
+
+struct	mtget {
+	long	mt_type;	/* type of magtape device */
+	long	mt_resid;	/* residual count: (not sure)
+				 *	number of bytes ignored, or
+				 *	number of files not skipped, or
+				 *	number of records not skipped.
+				 */
+	/* the following registers are device dependent */
+	long	mt_dsreg;	/* status register */
+	long	mt_gstat;	/* generic (device independent) status */
+	long	mt_erreg;	/* error register */
+	/* The next two fields are not always used */
+	__kernel_daddr_t mt_fileno;	/* number of current file on tape */
+	__kernel_daddr_t mt_blkno;	/* current block number */
+};
+
+
+
+/*
+ * Constants for mt_type. Not all of these are supported,
+ * and these are not all of the ones that are supported.
+ */
+#define MT_ISUNKNOWN		0x01
+#define MT_ISQIC02		0x02	/* Generic QIC-02 tape streamer */
+#define MT_ISWT5150		0x03	/* Wangtek 5150EQ, QIC-150, QIC-02 */
+#define MT_ISARCHIVE_5945L2	0x04	/* Archive 5945L-2, QIC-24, QIC-02? */
+#define MT_ISCMSJ500		0x05	/* CMS Jumbo 500 (QIC-02?) */
+#define MT_ISTDC3610		0x06	/* Tandberg 6310, QIC-24 */
+#define MT_ISARCHIVE_VP60I	0x07	/* Archive VP60i, QIC-02 */
+#define MT_ISARCHIVE_2150L	0x08	/* Archive Viper 2150L */
+#define MT_ISARCHIVE_2060L	0x09	/* Archive Viper 2060L */
+#define MT_ISARCHIVESC499	0x0A	/* Archive SC-499 QIC-36 controller */
+#define MT_ISQIC02_ALL_FEATURES	0x0F	/* Generic QIC-02 with all features */
+#define MT_ISWT5099EEN24	0x11	/* Wangtek 5099-een24, 60MB, QIC-24 */
+#define MT_ISTEAC_MT2ST		0x12	/* Teac MT-2ST 155mb drive, Teac DC-1 card (Wangtek type) */
+#define MT_ISEVEREX_FT40A	0x32	/* Everex FT40A (QIC-40) */
+#define MT_ISDDS1		0x51	/* DDS device without partitions */
+#define MT_ISDDS2		0x52	/* DDS device with partitions */
+#define MT_ISONSTREAM_SC        0x61   /* OnStream SCSI tape drives (SC-x0)
+					  and SCSI emulated (DI, DP, USB) */
+#define MT_ISSCSI1		0x71	/* Generic ANSI SCSI-1 tape unit */
+#define MT_ISSCSI2		0x72	/* Generic ANSI SCSI-2 tape unit */
+
+/* QIC-40/80/3010/3020 ftape supported drives.
+ * 20bit vendor ID + 0x800000 (see ftape-vendors.h)
+ */
+#define MT_ISFTAPE_UNKNOWN	0x800000 /* obsolete */
+#define MT_ISFTAPE_FLAG	0x800000
+
+
+/* structure for MTIOCPOS - mag tape get position command */
+
+struct	mtpos {
+	long 	mt_blkno;	/* current block number */
+};
+
+
+/* mag tape io control commands */
+#define	MTIOCTOP	_IOW('m', 1, struct mtop)	/* do a mag tape op */
+#define	MTIOCGET	_IOR('m', 2, struct mtget)	/* get tape status */
+#define	MTIOCPOS	_IOR('m', 3, struct mtpos)	/* get tape position */
+
+
+/* Generic Mag Tape (device independent) status macros for examining
+ * mt_gstat -- HP-UX compatible.
+ * There is room for more generic status bits here, but I don't
+ * know which of them are reserved. At least three or so should
+ * be added to make this really useful.
+ */
+#define GMT_EOF(x)              ((x) & 0x80000000)
+#define GMT_BOT(x)              ((x) & 0x40000000)
+#define GMT_EOT(x)              ((x) & 0x20000000)
+#define GMT_SM(x)               ((x) & 0x10000000)  /* DDS setmark */
+#define GMT_EOD(x)              ((x) & 0x08000000)  /* DDS EOD */
+#define GMT_WR_PROT(x)          ((x) & 0x04000000)
+/* #define GMT_ ? 		((x) & 0x02000000) */
+#define GMT_ONLINE(x)           ((x) & 0x01000000)
+#define GMT_D_6250(x)           ((x) & 0x00800000)
+#define GMT_D_1600(x)           ((x) & 0x00400000)
+#define GMT_D_800(x)            ((x) & 0x00200000)
+/* #define GMT_ ? 		((x) & 0x00100000) */
+/* #define GMT_ ? 		((x) & 0x00080000) */
+#define GMT_DR_OPEN(x)          ((x) & 0x00040000)  /* door open (no tape) */
+/* #define GMT_ ? 		((x) & 0x00020000) */
+#define GMT_IM_REP_EN(x)        ((x) & 0x00010000)  /* immediate report mode */
+#define GMT_CLN(x)              ((x) & 0x00008000)  /* cleaning requested */
+/* 15 generic status bits unused */
+
+
+/* SCSI-tape specific definitions */
+/* Bitfield shifts in the status  */
+#define MT_ST_BLKSIZE_SHIFT	0
+#define MT_ST_BLKSIZE_MASK	0xffffff
+#define MT_ST_DENSITY_SHIFT	24
+#define MT_ST_DENSITY_MASK	0xff000000
+
+#define MT_ST_SOFTERR_SHIFT	0
+#define MT_ST_SOFTERR_MASK	0xffff
+
+/* Bitfields for the MTSETDRVBUFFER ioctl */
+#define MT_ST_OPTIONS		0xf0000000
+#define MT_ST_BOOLEANS		0x10000000
+#define MT_ST_SETBOOLEANS	0x30000000
+#define MT_ST_CLEARBOOLEANS	0x40000000
+#define MT_ST_WRITE_THRESHOLD	0x20000000
+#define MT_ST_DEF_BLKSIZE	0x50000000
+#define MT_ST_DEF_OPTIONS	0x60000000
+#define MT_ST_TIMEOUTS		0x70000000
+#define MT_ST_SET_TIMEOUT	(MT_ST_TIMEOUTS | 0x000000)
+#define MT_ST_SET_LONG_TIMEOUT	(MT_ST_TIMEOUTS | 0x100000)
+#define MT_ST_SET_CLN		0x80000000
+
+#define MT_ST_BUFFER_WRITES	0x1
+#define MT_ST_ASYNC_WRITES	0x2
+#define MT_ST_READ_AHEAD	0x4
+#define MT_ST_DEBUGGING		0x8
+#define MT_ST_TWO_FM		0x10
+#define MT_ST_FAST_MTEOM	0x20
+#define MT_ST_AUTO_LOCK		0x40
+#define MT_ST_DEF_WRITES	0x80
+#define MT_ST_CAN_BSR		0x100
+#define MT_ST_NO_BLKLIMS	0x200
+#define MT_ST_CAN_PARTITIONS    0x400
+#define MT_ST_SCSI2LOGICAL      0x800
+#define MT_ST_SYSV              0x1000
+#define MT_ST_NOWAIT            0x2000
+#define MT_ST_SILI		0x4000
+#define MT_ST_NOWAIT_EOF	0x8000
+
+/* The mode parameters to be controlled. Parameter chosen with bits 20-28 */
+#define MT_ST_CLEAR_DEFAULT	0xfffff
+#define MT_ST_DEF_DENSITY	(MT_ST_DEF_OPTIONS | 0x100000)
+#define MT_ST_DEF_COMPRESSION	(MT_ST_DEF_OPTIONS | 0x200000)
+#define MT_ST_DEF_DRVBUFFER	(MT_ST_DEF_OPTIONS | 0x300000)
+
+/* The offset for the arguments for the special HP changer load command. */
+#define MT_ST_HPLOADER_OFFSET 10000
+
+#endif /* _LINUX_MTIO_H */
diff --git a/include/linux/mutex-debug.h b/include/linux/mutex-debug.h
new file mode 100644
index 00000000..731d77d6
--- /dev/null
+++ b/include/linux/mutex-debug.h
@@ -0,0 +1,23 @@
+#ifndef __LINUX_MUTEX_DEBUG_H
+#define __LINUX_MUTEX_DEBUG_H
+
+#include <linux/linkage.h>
+#include <linux/lockdep.h>
+
+/*
+ * Mutexes - debugging helpers:
+ */
+
+#define __DEBUG_MUTEX_INITIALIZER(lockname)				\
+	, .magic = &lockname
+
+#define mutex_init(mutex)						\
+do {									\
+	static struct lock_class_key __key;				\
+									\
+	__mutex_init((mutex), #mutex, &__key);				\
+} while (0)
+
+extern void mutex_destroy(struct mutex *lock);
+
+#endif
diff --git a/include/linux/mutex.h b/include/linux/mutex.h
new file mode 100644
index 00000000..9121595a
--- /dev/null
+++ b/include/linux/mutex.h
@@ -0,0 +1,176 @@
+/*
+ * Mutexes: blocking mutual exclusion locks
+ *
+ * started by Ingo Molnar:
+ *
+ *  Copyright (C) 2004, 2005, 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
+ *
+ * This file contains the main data structure and API definitions.
+ */
+#ifndef __LINUX_MUTEX_H
+#define __LINUX_MUTEX_H
+
+#include <linux/list.h>
+#include <linux/spinlock_types.h>
+#include <linux/linkage.h>
+#include <linux/lockdep.h>
+
+#include <linux/atomic.h>
+
+/*
+ * Simple, straightforward mutexes with strict semantics:
+ *
+ * - only one task can hold the mutex at a time
+ * - only the owner can unlock the mutex
+ * - multiple unlocks are not permitted
+ * - recursive locking is not permitted
+ * - a mutex object must be initialized via the API
+ * - a mutex object must not be initialized via memset or copying
+ * - task may not exit with mutex held
+ * - memory areas where held locks reside must not be freed
+ * - held mutexes must not be reinitialized
+ * - mutexes may not be used in hardware or software interrupt
+ *   contexts such as tasklets and timers
+ *
+ * These semantics are fully enforced when DEBUG_MUTEXES is
+ * enabled. Furthermore, besides enforcing the above rules, the mutex
+ * debugging code also implements a number of additional features
+ * that make lock debugging easier and faster:
+ *
+ * - uses symbolic names of mutexes, whenever they are printed in debug output
+ * - point-of-acquire tracking, symbolic lookup of function names
+ * - list of all locks held in the system, printout of them
+ * - owner tracking
+ * - detects self-recursing locks and prints out all relevant info
+ * - detects multi-task circular deadlocks and prints out all affected
+ *   locks and tasks (and only those tasks)
+ */
+struct mutex {
+	/* 1: unlocked, 0: locked, negative: locked, possible waiters */
+	atomic_t		count;
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+#if defined(CONFIG_DEBUG_MUTEXES) || defined(CONFIG_SMP)
+	struct task_struct	*owner;
+#endif
+#ifdef CONFIG_DEBUG_MUTEXES
+	const char 		*name;
+	void			*magic;
+#endif
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	struct lockdep_map	dep_map;
+#endif
+};
+
+/*
+ * This is the control structure for tasks blocked on mutex,
+ * which resides on the blocked task's kernel stack:
+ */
+struct mutex_waiter {
+	struct list_head	list;
+	struct task_struct	*task;
+#ifdef CONFIG_DEBUG_MUTEXES
+	void			*magic;
+#endif
+};
+
+#ifdef CONFIG_DEBUG_MUTEXES
+# include <linux/mutex-debug.h>
+#else
+# define __DEBUG_MUTEX_INITIALIZER(lockname)
+/**
+ * mutex_init - initialize the mutex
+ * @mutex: the mutex to be initialized
+ *
+ * Initialize the mutex to unlocked state.
+ *
+ * It is not allowed to initialize an already locked mutex.
+ */
+# define mutex_init(mutex) \
+do {							\
+	static struct lock_class_key __key;		\
+							\
+	__mutex_init((mutex), #mutex, &__key);		\
+} while (0)
+static inline void mutex_destroy(struct mutex *lock) {}
+#endif
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# define __DEP_MAP_MUTEX_INITIALIZER(lockname) \
+		, .dep_map = { .name = #lockname }
+#else
+# define __DEP_MAP_MUTEX_INITIALIZER(lockname)
+#endif
+
+#define __MUTEX_INITIALIZER(lockname) \
+		{ .count = ATOMIC_INIT(1) \
+		, .wait_lock = __SPIN_LOCK_UNLOCKED(lockname.wait_lock) \
+		, .wait_list = LIST_HEAD_INIT(lockname.wait_list) \
+		__DEBUG_MUTEX_INITIALIZER(lockname) \
+		__DEP_MAP_MUTEX_INITIALIZER(lockname) }
+
+#define DEFINE_MUTEX(mutexname) \
+	struct mutex mutexname = __MUTEX_INITIALIZER(mutexname)
+
+extern void __mutex_init(struct mutex *lock, const char *name,
+			 struct lock_class_key *key);
+
+/**
+ * mutex_is_locked - is the mutex locked
+ * @lock: the mutex to be queried
+ *
+ * Returns 1 if the mutex is locked, 0 if unlocked.
+ */
+static inline int mutex_is_locked(struct mutex *lock)
+{
+	return atomic_read(&lock->count) != 1;
+}
+
+/*
+ * See kernel/mutex.c for detailed documentation of these APIs.
+ * Also see Documentation/mutex-design.txt.
+ */
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+extern void mutex_lock_nested(struct mutex *lock, unsigned int subclass);
+extern void _mutex_lock_nest_lock(struct mutex *lock, struct lockdep_map *nest_lock);
+extern int __must_check mutex_lock_interruptible_nested(struct mutex *lock,
+					unsigned int subclass);
+extern int __must_check mutex_lock_killable_nested(struct mutex *lock,
+					unsigned int subclass);
+
+#define mutex_lock(lock) mutex_lock_nested(lock, 0)
+#define mutex_lock_interruptible(lock) mutex_lock_interruptible_nested(lock, 0)
+#define mutex_lock_killable(lock) mutex_lock_killable_nested(lock, 0)
+
+#define mutex_lock_nest_lock(lock, nest_lock)				\
+do {									\
+	typecheck(struct lockdep_map *, &(nest_lock)->dep_map);		\
+	_mutex_lock_nest_lock(lock, &(nest_lock)->dep_map);		\
+} while (0)
+
+#else
+extern void mutex_lock(struct mutex *lock);
+extern int __must_check mutex_lock_interruptible(struct mutex *lock);
+extern int __must_check mutex_lock_killable(struct mutex *lock);
+
+# define mutex_lock_nested(lock, subclass) mutex_lock(lock)
+# define mutex_lock_interruptible_nested(lock, subclass) mutex_lock_interruptible(lock)
+# define mutex_lock_killable_nested(lock, subclass) mutex_lock_killable(lock)
+# define mutex_lock_nest_lock(lock, nest_lock) mutex_lock(lock)
+#endif
+
+/*
+ * NOTE: mutex_trylock() follows the spin_trylock() convention,
+ *       not the down_trylock() convention!
+ *
+ * Returns 1 if the mutex has been acquired successfully, and 0 on contention.
+ */
+extern int mutex_trylock(struct mutex *lock);
+extern void mutex_unlock(struct mutex *lock);
+extern int atomic_dec_and_mutex_lock(atomic_t *cnt, struct mutex *lock);
+
+#ifndef CONFIG_HAVE_ARCH_MUTEX_CPU_RELAX
+#define arch_mutex_cpu_relax()	cpu_relax()
+#endif
+
+#endif
diff --git a/include/linux/mv643xx.h b/include/linux/mv643xx.h
new file mode 100644
index 00000000..69327b7b
--- /dev/null
+++ b/include/linux/mv643xx.h
@@ -0,0 +1,979 @@
+/*
+ * mv643xx.h - MV-643XX Internal registers definition file.
+ *
+ * Copyright 2002 Momentum Computer, Inc.
+ * 	Author: Matthew Dharm <mdharm@momenco.com>
+ * Copyright 2002 GALILEO TECHNOLOGY, LTD. 
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef __ASM_MV643XX_H
+#define __ASM_MV643XX_H
+
+#include <asm/types.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/mv643xx_i2c.h>
+
+/****************************************/
+/* Processor Address Space              */
+/****************************************/
+
+/* DDR SDRAM BAR and size registers */
+
+#define MV64340_CS_0_BASE_ADDR                                      0x008
+#define MV64340_CS_0_SIZE                                           0x010
+#define MV64340_CS_1_BASE_ADDR                                      0x208
+#define MV64340_CS_1_SIZE                                           0x210
+#define MV64340_CS_2_BASE_ADDR                                      0x018
+#define MV64340_CS_2_SIZE                                           0x020
+#define MV64340_CS_3_BASE_ADDR                                      0x218
+#define MV64340_CS_3_SIZE                                           0x220
+
+/* Devices BAR and size registers */
+
+#define MV64340_DEV_CS0_BASE_ADDR                                   0x028
+#define MV64340_DEV_CS0_SIZE                                        0x030
+#define MV64340_DEV_CS1_BASE_ADDR                                   0x228
+#define MV64340_DEV_CS1_SIZE                                        0x230
+#define MV64340_DEV_CS2_BASE_ADDR                                   0x248
+#define MV64340_DEV_CS2_SIZE                                        0x250
+#define MV64340_DEV_CS3_BASE_ADDR                                   0x038
+#define MV64340_DEV_CS3_SIZE                                        0x040
+#define MV64340_BOOTCS_BASE_ADDR                                    0x238
+#define MV64340_BOOTCS_SIZE                                         0x240
+
+/* PCI 0 BAR and size registers */
+
+#define MV64340_PCI_0_IO_BASE_ADDR                                  0x048
+#define MV64340_PCI_0_IO_SIZE                                       0x050
+#define MV64340_PCI_0_MEMORY0_BASE_ADDR                             0x058
+#define MV64340_PCI_0_MEMORY0_SIZE                                  0x060
+#define MV64340_PCI_0_MEMORY1_BASE_ADDR                             0x080
+#define MV64340_PCI_0_MEMORY1_SIZE                                  0x088
+#define MV64340_PCI_0_MEMORY2_BASE_ADDR                             0x258
+#define MV64340_PCI_0_MEMORY2_SIZE                                  0x260
+#define MV64340_PCI_0_MEMORY3_BASE_ADDR                             0x280
+#define MV64340_PCI_0_MEMORY3_SIZE                                  0x288
+
+/* PCI 1 BAR and size registers */
+#define MV64340_PCI_1_IO_BASE_ADDR                                  0x090
+#define MV64340_PCI_1_IO_SIZE                                       0x098
+#define MV64340_PCI_1_MEMORY0_BASE_ADDR                             0x0a0
+#define MV64340_PCI_1_MEMORY0_SIZE                                  0x0a8
+#define MV64340_PCI_1_MEMORY1_BASE_ADDR                             0x0b0
+#define MV64340_PCI_1_MEMORY1_SIZE                                  0x0b8
+#define MV64340_PCI_1_MEMORY2_BASE_ADDR                             0x2a0
+#define MV64340_PCI_1_MEMORY2_SIZE                                  0x2a8
+#define MV64340_PCI_1_MEMORY3_BASE_ADDR                             0x2b0
+#define MV64340_PCI_1_MEMORY3_SIZE                                  0x2b8
+
+/* SRAM base address */
+#define MV64340_INTEGRATED_SRAM_BASE_ADDR                           0x268
+
+/* internal registers space base address */
+#define MV64340_INTERNAL_SPACE_BASE_ADDR                            0x068
+
+/* Enables the CS , DEV_CS , PCI 0 and PCI 1 
+   windows above */
+#define MV64340_BASE_ADDR_ENABLE                                    0x278
+
+/****************************************/
+/* PCI remap registers                  */
+/****************************************/
+      /* PCI 0 */
+#define MV64340_PCI_0_IO_ADDR_REMAP                                 0x0f0
+#define MV64340_PCI_0_MEMORY0_LOW_ADDR_REMAP                        0x0f8
+#define MV64340_PCI_0_MEMORY0_HIGH_ADDR_REMAP                       0x320
+#define MV64340_PCI_0_MEMORY1_LOW_ADDR_REMAP                        0x100
+#define MV64340_PCI_0_MEMORY1_HIGH_ADDR_REMAP                       0x328
+#define MV64340_PCI_0_MEMORY2_LOW_ADDR_REMAP                        0x2f8
+#define MV64340_PCI_0_MEMORY2_HIGH_ADDR_REMAP                       0x330
+#define MV64340_PCI_0_MEMORY3_LOW_ADDR_REMAP                        0x300
+#define MV64340_PCI_0_MEMORY3_HIGH_ADDR_REMAP                       0x338
+      /* PCI 1 */
+#define MV64340_PCI_1_IO_ADDR_REMAP                                 0x108
+#define MV64340_PCI_1_MEMORY0_LOW_ADDR_REMAP                        0x110
+#define MV64340_PCI_1_MEMORY0_HIGH_ADDR_REMAP                       0x340
+#define MV64340_PCI_1_MEMORY1_LOW_ADDR_REMAP                        0x118
+#define MV64340_PCI_1_MEMORY1_HIGH_ADDR_REMAP                       0x348
+#define MV64340_PCI_1_MEMORY2_LOW_ADDR_REMAP                        0x310
+#define MV64340_PCI_1_MEMORY2_HIGH_ADDR_REMAP                       0x350
+#define MV64340_PCI_1_MEMORY3_LOW_ADDR_REMAP                        0x318
+#define MV64340_PCI_1_MEMORY3_HIGH_ADDR_REMAP                       0x358
+ 
+#define MV64340_CPU_PCI_0_HEADERS_RETARGET_CONTROL                  0x3b0
+#define MV64340_CPU_PCI_0_HEADERS_RETARGET_BASE                     0x3b8
+#define MV64340_CPU_PCI_1_HEADERS_RETARGET_CONTROL                  0x3c0
+#define MV64340_CPU_PCI_1_HEADERS_RETARGET_BASE                     0x3c8
+#define MV64340_CPU_GE_HEADERS_RETARGET_CONTROL                     0x3d0
+#define MV64340_CPU_GE_HEADERS_RETARGET_BASE                        0x3d8
+#define MV64340_CPU_IDMA_HEADERS_RETARGET_CONTROL                   0x3e0
+#define MV64340_CPU_IDMA_HEADERS_RETARGET_BASE                      0x3e8
+
+/****************************************/
+/*         CPU Control Registers        */
+/****************************************/
+
+#define MV64340_CPU_CONFIG                                          0x000
+#define MV64340_CPU_MODE                                            0x120
+#define MV64340_CPU_MASTER_CONTROL                                  0x160
+#define MV64340_CPU_CROSS_BAR_CONTROL_LOW                           0x150
+#define MV64340_CPU_CROSS_BAR_CONTROL_HIGH                          0x158
+#define MV64340_CPU_CROSS_BAR_TIMEOUT                               0x168
+
+/****************************************/
+/* SMP RegisterS                        */
+/****************************************/
+
+#define MV64340_SMP_WHO_AM_I                                        0x200
+#define MV64340_SMP_CPU0_DOORBELL                                   0x214
+#define MV64340_SMP_CPU0_DOORBELL_CLEAR                             0x21C
+#define MV64340_SMP_CPU1_DOORBELL                                   0x224
+#define MV64340_SMP_CPU1_DOORBELL_CLEAR                             0x22C
+#define MV64340_SMP_CPU0_DOORBELL_MASK                              0x234
+#define MV64340_SMP_CPU1_DOORBELL_MASK                              0x23C
+#define MV64340_SMP_SEMAPHOR0                                       0x244
+#define MV64340_SMP_SEMAPHOR1                                       0x24c
+#define MV64340_SMP_SEMAPHOR2                                       0x254
+#define MV64340_SMP_SEMAPHOR3                                       0x25c
+#define MV64340_SMP_SEMAPHOR4                                       0x264
+#define MV64340_SMP_SEMAPHOR5                                       0x26c
+#define MV64340_SMP_SEMAPHOR6                                       0x274
+#define MV64340_SMP_SEMAPHOR7                                       0x27c
+
+/****************************************/
+/*  CPU Sync Barrier Register           */
+/****************************************/
+
+#define MV64340_CPU_0_SYNC_BARRIER_TRIGGER                          0x0c0
+#define MV64340_CPU_0_SYNC_BARRIER_VIRTUAL                          0x0c8
+#define MV64340_CPU_1_SYNC_BARRIER_TRIGGER                          0x0d0
+#define MV64340_CPU_1_SYNC_BARRIER_VIRTUAL                          0x0d8
+
+/****************************************/
+/* CPU Access Protect                   */
+/****************************************/
+
+#define MV64340_CPU_PROTECT_WINDOW_0_BASE_ADDR                      0x180
+#define MV64340_CPU_PROTECT_WINDOW_0_SIZE                           0x188
+#define MV64340_CPU_PROTECT_WINDOW_1_BASE_ADDR                      0x190
+#define MV64340_CPU_PROTECT_WINDOW_1_SIZE                           0x198
+#define MV64340_CPU_PROTECT_WINDOW_2_BASE_ADDR                      0x1a0
+#define MV64340_CPU_PROTECT_WINDOW_2_SIZE                           0x1a8
+#define MV64340_CPU_PROTECT_WINDOW_3_BASE_ADDR                      0x1b0
+#define MV64340_CPU_PROTECT_WINDOW_3_SIZE                           0x1b8
+
+
+/****************************************/
+/*          CPU Error Report            */
+/****************************************/
+
+#define MV64340_CPU_ERROR_ADDR_LOW                                  0x070
+#define MV64340_CPU_ERROR_ADDR_HIGH                                 0x078
+#define MV64340_CPU_ERROR_DATA_LOW                                  0x128
+#define MV64340_CPU_ERROR_DATA_HIGH                                 0x130
+#define MV64340_CPU_ERROR_PARITY                                    0x138
+#define MV64340_CPU_ERROR_CAUSE                                     0x140
+#define MV64340_CPU_ERROR_MASK                                      0x148
+
+/****************************************/
+/*      CPU Interface Debug Registers 	*/
+/****************************************/
+
+#define MV64340_PUNIT_SLAVE_DEBUG_LOW                               0x360
+#define MV64340_PUNIT_SLAVE_DEBUG_HIGH                              0x368
+#define MV64340_PUNIT_MASTER_DEBUG_LOW                              0x370
+#define MV64340_PUNIT_MASTER_DEBUG_HIGH                             0x378
+#define MV64340_PUNIT_MMASK                                         0x3e4
+
+/****************************************/
+/*  Integrated SRAM Registers           */
+/****************************************/
+
+#define MV64340_SRAM_CONFIG                                         0x380
+#define MV64340_SRAM_TEST_MODE                                      0X3F4
+#define MV64340_SRAM_ERROR_CAUSE                                    0x388
+#define MV64340_SRAM_ERROR_ADDR                                     0x390
+#define MV64340_SRAM_ERROR_ADDR_HIGH                                0X3F8
+#define MV64340_SRAM_ERROR_DATA_LOW                                 0x398
+#define MV64340_SRAM_ERROR_DATA_HIGH                                0x3a0
+#define MV64340_SRAM_ERROR_DATA_PARITY                              0x3a8
+
+/****************************************/
+/* SDRAM Configuration                  */
+/****************************************/
+
+#define MV64340_SDRAM_CONFIG                                        0x1400
+#define MV64340_D_UNIT_CONTROL_LOW                                  0x1404
+#define MV64340_D_UNIT_CONTROL_HIGH                                 0x1424
+#define MV64340_SDRAM_TIMING_CONTROL_LOW                            0x1408
+#define MV64340_SDRAM_TIMING_CONTROL_HIGH                           0x140c
+#define MV64340_SDRAM_ADDR_CONTROL                                  0x1410
+#define MV64340_SDRAM_OPEN_PAGES_CONTROL                            0x1414
+#define MV64340_SDRAM_OPERATION                                     0x1418
+#define MV64340_SDRAM_MODE                                          0x141c
+#define MV64340_EXTENDED_DRAM_MODE                                  0x1420
+#define MV64340_SDRAM_CROSS_BAR_CONTROL_LOW                         0x1430
+#define MV64340_SDRAM_CROSS_BAR_CONTROL_HIGH                        0x1434
+#define MV64340_SDRAM_CROSS_BAR_TIMEOUT                             0x1438
+#define MV64340_SDRAM_ADDR_CTRL_PADS_CALIBRATION                    0x14c0
+#define MV64340_SDRAM_DATA_PADS_CALIBRATION                         0x14c4
+
+/****************************************/
+/* SDRAM Error Report                   */
+/****************************************/
+
+#define MV64340_SDRAM_ERROR_DATA_LOW                                0x1444
+#define MV64340_SDRAM_ERROR_DATA_HIGH                               0x1440
+#define MV64340_SDRAM_ERROR_ADDR                                    0x1450
+#define MV64340_SDRAM_RECEIVED_ECC                                  0x1448
+#define MV64340_SDRAM_CALCULATED_ECC                                0x144c
+#define MV64340_SDRAM_ECC_CONTROL                                   0x1454
+#define MV64340_SDRAM_ECC_ERROR_COUNTER                             0x1458
+
+/******************************************/
+/*  Controlled Delay Line (CDL) Registers */
+/******************************************/
+
+#define MV64340_DFCDL_CONFIG0                                       0x1480
+#define MV64340_DFCDL_CONFIG1                                       0x1484
+#define MV64340_DLL_WRITE                                           0x1488
+#define MV64340_DLL_READ                                            0x148c
+#define MV64340_SRAM_ADDR                                           0x1490
+#define MV64340_SRAM_DATA0                                          0x1494
+#define MV64340_SRAM_DATA1                                          0x1498
+#define MV64340_SRAM_DATA2                                          0x149c
+#define MV64340_DFCL_PROBE                                          0x14a0
+
+/******************************************/
+/*   Debug Registers                      */
+/******************************************/
+
+#define MV64340_DUNIT_DEBUG_LOW                                     0x1460
+#define MV64340_DUNIT_DEBUG_HIGH                                    0x1464
+#define MV64340_DUNIT_MMASK                                         0X1b40
+
+/****************************************/
+/* Device Parameters			*/
+/****************************************/
+
+#define MV64340_DEVICE_BANK0_PARAMETERS				    0x45c
+#define MV64340_DEVICE_BANK1_PARAMETERS				    0x460
+#define MV64340_DEVICE_BANK2_PARAMETERS				    0x464
+#define MV64340_DEVICE_BANK3_PARAMETERS				    0x468
+#define MV64340_DEVICE_BOOT_BANK_PARAMETERS			    0x46c
+#define MV64340_DEVICE_INTERFACE_CONTROL                            0x4c0
+#define MV64340_DEVICE_INTERFACE_CROSS_BAR_CONTROL_LOW              0x4c8
+#define MV64340_DEVICE_INTERFACE_CROSS_BAR_CONTROL_HIGH             0x4cc
+#define MV64340_DEVICE_INTERFACE_CROSS_BAR_TIMEOUT                  0x4c4
+
+/****************************************/
+/* Device interrupt registers		*/
+/****************************************/
+
+#define MV64340_DEVICE_INTERRUPT_CAUSE				    0x4d0
+#define MV64340_DEVICE_INTERRUPT_MASK				    0x4d4
+#define MV64340_DEVICE_ERROR_ADDR				    0x4d8
+#define MV64340_DEVICE_ERROR_DATA   				    0x4dc
+#define MV64340_DEVICE_ERROR_PARITY     			    0x4e0
+
+/****************************************/
+/* Device debug registers   		*/
+/****************************************/
+
+#define MV64340_DEVICE_DEBUG_LOW     				    0x4e4
+#define MV64340_DEVICE_DEBUG_HIGH     				    0x4e8
+#define MV64340_RUNIT_MMASK                                         0x4f0
+
+/****************************************/
+/* PCI Slave Address Decoding registers */
+/****************************************/
+
+#define MV64340_PCI_0_CS_0_BANK_SIZE                                0xc08
+#define MV64340_PCI_1_CS_0_BANK_SIZE                                0xc88
+#define MV64340_PCI_0_CS_1_BANK_SIZE                                0xd08
+#define MV64340_PCI_1_CS_1_BANK_SIZE                                0xd88
+#define MV64340_PCI_0_CS_2_BANK_SIZE                                0xc0c
+#define MV64340_PCI_1_CS_2_BANK_SIZE                                0xc8c
+#define MV64340_PCI_0_CS_3_BANK_SIZE                                0xd0c
+#define MV64340_PCI_1_CS_3_BANK_SIZE                                0xd8c
+#define MV64340_PCI_0_DEVCS_0_BANK_SIZE                             0xc10
+#define MV64340_PCI_1_DEVCS_0_BANK_SIZE                             0xc90
+#define MV64340_PCI_0_DEVCS_1_BANK_SIZE                             0xd10
+#define MV64340_PCI_1_DEVCS_1_BANK_SIZE                             0xd90
+#define MV64340_PCI_0_DEVCS_2_BANK_SIZE                             0xd18
+#define MV64340_PCI_1_DEVCS_2_BANK_SIZE                             0xd98
+#define MV64340_PCI_0_DEVCS_3_BANK_SIZE                             0xc14
+#define MV64340_PCI_1_DEVCS_3_BANK_SIZE                             0xc94
+#define MV64340_PCI_0_DEVCS_BOOT_BANK_SIZE                          0xd14
+#define MV64340_PCI_1_DEVCS_BOOT_BANK_SIZE                          0xd94
+#define MV64340_PCI_0_P2P_MEM0_BAR_SIZE                             0xd1c
+#define MV64340_PCI_1_P2P_MEM0_BAR_SIZE                             0xd9c
+#define MV64340_PCI_0_P2P_MEM1_BAR_SIZE                             0xd20
+#define MV64340_PCI_1_P2P_MEM1_BAR_SIZE                             0xda0
+#define MV64340_PCI_0_P2P_I_O_BAR_SIZE                              0xd24
+#define MV64340_PCI_1_P2P_I_O_BAR_SIZE                              0xda4
+#define MV64340_PCI_0_CPU_BAR_SIZE                                  0xd28
+#define MV64340_PCI_1_CPU_BAR_SIZE                                  0xda8
+#define MV64340_PCI_0_INTERNAL_SRAM_BAR_SIZE                        0xe00
+#define MV64340_PCI_1_INTERNAL_SRAM_BAR_SIZE                        0xe80
+#define MV64340_PCI_0_EXPANSION_ROM_BAR_SIZE                        0xd2c
+#define MV64340_PCI_1_EXPANSION_ROM_BAR_SIZE                        0xd9c
+#define MV64340_PCI_0_BASE_ADDR_REG_ENABLE                          0xc3c
+#define MV64340_PCI_1_BASE_ADDR_REG_ENABLE                          0xcbc
+#define MV64340_PCI_0_CS_0_BASE_ADDR_REMAP			    0xc48
+#define MV64340_PCI_1_CS_0_BASE_ADDR_REMAP			    0xcc8
+#define MV64340_PCI_0_CS_1_BASE_ADDR_REMAP			    0xd48
+#define MV64340_PCI_1_CS_1_BASE_ADDR_REMAP			    0xdc8
+#define MV64340_PCI_0_CS_2_BASE_ADDR_REMAP			    0xc4c
+#define MV64340_PCI_1_CS_2_BASE_ADDR_REMAP			    0xccc
+#define MV64340_PCI_0_CS_3_BASE_ADDR_REMAP			    0xd4c
+#define MV64340_PCI_1_CS_3_BASE_ADDR_REMAP			    0xdcc
+#define MV64340_PCI_0_CS_0_BASE_HIGH_ADDR_REMAP			    0xF04
+#define MV64340_PCI_1_CS_0_BASE_HIGH_ADDR_REMAP			    0xF84
+#define MV64340_PCI_0_CS_1_BASE_HIGH_ADDR_REMAP			    0xF08
+#define MV64340_PCI_1_CS_1_BASE_HIGH_ADDR_REMAP			    0xF88
+#define MV64340_PCI_0_CS_2_BASE_HIGH_ADDR_REMAP			    0xF0C
+#define MV64340_PCI_1_CS_2_BASE_HIGH_ADDR_REMAP			    0xF8C
+#define MV64340_PCI_0_CS_3_BASE_HIGH_ADDR_REMAP			    0xF10
+#define MV64340_PCI_1_CS_3_BASE_HIGH_ADDR_REMAP			    0xF90
+#define MV64340_PCI_0_DEVCS_0_BASE_ADDR_REMAP			    0xc50
+#define MV64340_PCI_1_DEVCS_0_BASE_ADDR_REMAP			    0xcd0
+#define MV64340_PCI_0_DEVCS_1_BASE_ADDR_REMAP			    0xd50
+#define MV64340_PCI_1_DEVCS_1_BASE_ADDR_REMAP			    0xdd0
+#define MV64340_PCI_0_DEVCS_2_BASE_ADDR_REMAP			    0xd58
+#define MV64340_PCI_1_DEVCS_2_BASE_ADDR_REMAP			    0xdd8
+#define MV64340_PCI_0_DEVCS_3_BASE_ADDR_REMAP           	    0xc54
+#define MV64340_PCI_1_DEVCS_3_BASE_ADDR_REMAP           	    0xcd4
+#define MV64340_PCI_0_DEVCS_BOOTCS_BASE_ADDR_REMAP      	    0xd54
+#define MV64340_PCI_1_DEVCS_BOOTCS_BASE_ADDR_REMAP      	    0xdd4
+#define MV64340_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_LOW                  0xd5c
+#define MV64340_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_LOW                  0xddc
+#define MV64340_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_HIGH                 0xd60
+#define MV64340_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_HIGH                 0xde0
+#define MV64340_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_LOW                  0xd64
+#define MV64340_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_LOW                  0xde4
+#define MV64340_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_HIGH                 0xd68
+#define MV64340_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_HIGH                 0xde8
+#define MV64340_PCI_0_P2P_I_O_BASE_ADDR_REMAP                       0xd6c
+#define MV64340_PCI_1_P2P_I_O_BASE_ADDR_REMAP                       0xdec 
+#define MV64340_PCI_0_CPU_BASE_ADDR_REMAP_LOW                       0xd70
+#define MV64340_PCI_1_CPU_BASE_ADDR_REMAP_LOW                       0xdf0
+#define MV64340_PCI_0_CPU_BASE_ADDR_REMAP_HIGH                      0xd74
+#define MV64340_PCI_1_CPU_BASE_ADDR_REMAP_HIGH                      0xdf4
+#define MV64340_PCI_0_INTEGRATED_SRAM_BASE_ADDR_REMAP               0xf00
+#define MV64340_PCI_1_INTEGRATED_SRAM_BASE_ADDR_REMAP               0xf80
+#define MV64340_PCI_0_EXPANSION_ROM_BASE_ADDR_REMAP                 0xf38
+#define MV64340_PCI_1_EXPANSION_ROM_BASE_ADDR_REMAP                 0xfb8
+#define MV64340_PCI_0_ADDR_DECODE_CONTROL                           0xd3c
+#define MV64340_PCI_1_ADDR_DECODE_CONTROL                           0xdbc
+#define MV64340_PCI_0_HEADERS_RETARGET_CONTROL                      0xF40
+#define MV64340_PCI_1_HEADERS_RETARGET_CONTROL                      0xFc0
+#define MV64340_PCI_0_HEADERS_RETARGET_BASE                         0xF44
+#define MV64340_PCI_1_HEADERS_RETARGET_BASE                         0xFc4
+#define MV64340_PCI_0_HEADERS_RETARGET_HIGH                         0xF48
+#define MV64340_PCI_1_HEADERS_RETARGET_HIGH                         0xFc8
+
+/***********************************/
+/*   PCI Control Register Map      */
+/***********************************/
+
+#define MV64340_PCI_0_DLL_STATUS_AND_COMMAND                        0x1d20
+#define MV64340_PCI_1_DLL_STATUS_AND_COMMAND                        0x1da0
+#define MV64340_PCI_0_MPP_PADS_DRIVE_CONTROL                        0x1d1C
+#define MV64340_PCI_1_MPP_PADS_DRIVE_CONTROL                        0x1d9C
+#define MV64340_PCI_0_COMMAND			         	    0xc00
+#define MV64340_PCI_1_COMMAND					    0xc80
+#define MV64340_PCI_0_MODE                                          0xd00
+#define MV64340_PCI_1_MODE                                          0xd80
+#define MV64340_PCI_0_RETRY	        	 		    0xc04
+#define MV64340_PCI_1_RETRY				            0xc84
+#define MV64340_PCI_0_READ_BUFFER_DISCARD_TIMER                     0xd04
+#define MV64340_PCI_1_READ_BUFFER_DISCARD_TIMER                     0xd84
+#define MV64340_PCI_0_MSI_TRIGGER_TIMER                             0xc38
+#define MV64340_PCI_1_MSI_TRIGGER_TIMER                             0xcb8
+#define MV64340_PCI_0_ARBITER_CONTROL                               0x1d00
+#define MV64340_PCI_1_ARBITER_CONTROL                               0x1d80
+#define MV64340_PCI_0_CROSS_BAR_CONTROL_LOW                         0x1d08
+#define MV64340_PCI_1_CROSS_BAR_CONTROL_LOW                         0x1d88
+#define MV64340_PCI_0_CROSS_BAR_CONTROL_HIGH                        0x1d0c
+#define MV64340_PCI_1_CROSS_BAR_CONTROL_HIGH                        0x1d8c
+#define MV64340_PCI_0_CROSS_BAR_TIMEOUT                             0x1d04
+#define MV64340_PCI_1_CROSS_BAR_TIMEOUT                             0x1d84
+#define MV64340_PCI_0_SYNC_BARRIER_TRIGGER_REG                      0x1D18
+#define MV64340_PCI_1_SYNC_BARRIER_TRIGGER_REG                      0x1D98
+#define MV64340_PCI_0_SYNC_BARRIER_VIRTUAL_REG                      0x1d10
+#define MV64340_PCI_1_SYNC_BARRIER_VIRTUAL_REG                      0x1d90
+#define MV64340_PCI_0_P2P_CONFIG                                    0x1d14
+#define MV64340_PCI_1_P2P_CONFIG                                    0x1d94
+
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_0_LOW                     0x1e00
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_0_HIGH                    0x1e04
+#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_0                         0x1e08
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_1_LOW                     0x1e10
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_1_HIGH                    0x1e14
+#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_1                         0x1e18
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_2_LOW                     0x1e20
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_2_HIGH                    0x1e24
+#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_2                         0x1e28
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_3_LOW                     0x1e30
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_3_HIGH                    0x1e34
+#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_3                         0x1e38
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_4_LOW                     0x1e40
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_4_HIGH                    0x1e44
+#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_4                         0x1e48
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_5_LOW                     0x1e50
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_5_HIGH                    0x1e54
+#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_5                         0x1e58
+
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_0_LOW                     0x1e80
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_0_HIGH                    0x1e84
+#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_0                         0x1e88
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_1_LOW                     0x1e90
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_1_HIGH                    0x1e94
+#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_1                         0x1e98
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_2_LOW                     0x1ea0
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_2_HIGH                    0x1ea4
+#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_2                         0x1ea8
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_3_LOW                     0x1eb0
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_3_HIGH                    0x1eb4
+#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_3                         0x1eb8
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_4_LOW                     0x1ec0
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_4_HIGH                    0x1ec4
+#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_4                         0x1ec8
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_5_LOW                     0x1ed0
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_5_HIGH                    0x1ed4
+#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_5                         0x1ed8
+
+/****************************************/
+/*   PCI Configuration Access Registers */
+/****************************************/
+
+#define MV64340_PCI_0_CONFIG_ADDR 				    0xcf8
+#define MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG                       0xcfc
+#define MV64340_PCI_1_CONFIG_ADDR 				    0xc78
+#define MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG                       0xc7c
+#define MV64340_PCI_0_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG	            0xc34
+#define MV64340_PCI_1_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG	            0xcb4
+
+/****************************************/
+/*   PCI Error Report Registers         */
+/****************************************/
+
+#define MV64340_PCI_0_SERR_MASK					    0xc28
+#define MV64340_PCI_1_SERR_MASK					    0xca8
+#define MV64340_PCI_0_ERROR_ADDR_LOW                                0x1d40
+#define MV64340_PCI_1_ERROR_ADDR_LOW                                0x1dc0
+#define MV64340_PCI_0_ERROR_ADDR_HIGH                               0x1d44
+#define MV64340_PCI_1_ERROR_ADDR_HIGH                               0x1dc4
+#define MV64340_PCI_0_ERROR_ATTRIBUTE                               0x1d48
+#define MV64340_PCI_1_ERROR_ATTRIBUTE                               0x1dc8
+#define MV64340_PCI_0_ERROR_COMMAND                                 0x1d50
+#define MV64340_PCI_1_ERROR_COMMAND                                 0x1dd0
+#define MV64340_PCI_0_ERROR_CAUSE                                   0x1d58
+#define MV64340_PCI_1_ERROR_CAUSE                                   0x1dd8
+#define MV64340_PCI_0_ERROR_MASK                                    0x1d5c
+#define MV64340_PCI_1_ERROR_MASK                                    0x1ddc
+
+/****************************************/
+/*   PCI Debug Registers                */
+/****************************************/
+
+#define MV64340_PCI_0_MMASK                                         0X1D24
+#define MV64340_PCI_1_MMASK                                         0X1DA4
+
+/*********************************************/
+/* PCI Configuration, Function 0, Registers  */
+/*********************************************/
+
+#define MV64340_PCI_DEVICE_AND_VENDOR_ID 			    0x000
+#define MV64340_PCI_STATUS_AND_COMMAND				    0x004
+#define MV64340_PCI_CLASS_CODE_AND_REVISION_ID			    0x008
+#define MV64340_PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE 	    0x00C
+
+#define MV64340_PCI_SCS_0_BASE_ADDR_LOW   	      		    0x010
+#define MV64340_PCI_SCS_0_BASE_ADDR_HIGH   		            0x014
+#define MV64340_PCI_SCS_1_BASE_ADDR_LOW  	     	            0x018
+#define MV64340_PCI_SCS_1_BASE_ADDR_HIGH 		            0x01C
+#define MV64340_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_LOW      	    0x020
+#define MV64340_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_HIGH     	    0x024
+#define MV64340_PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID	    0x02c
+#define MV64340_PCI_EXPANSION_ROM_BASE_ADDR_REG	                    0x030
+#define MV64340_PCI_CAPABILTY_LIST_POINTER                          0x034
+#define MV64340_PCI_INTERRUPT_PIN_AND_LINE 			    0x03C
+       /* capability list */
+#define MV64340_PCI_POWER_MANAGEMENT_CAPABILITY                     0x040
+#define MV64340_PCI_POWER_MANAGEMENT_STATUS_AND_CONTROL             0x044
+#define MV64340_PCI_VPD_ADDR                                        0x048
+#define MV64340_PCI_VPD_DATA                                        0x04c
+#define MV64340_PCI_MSI_MESSAGE_CONTROL                             0x050
+#define MV64340_PCI_MSI_MESSAGE_ADDR                                0x054
+#define MV64340_PCI_MSI_MESSAGE_UPPER_ADDR                          0x058
+#define MV64340_PCI_MSI_MESSAGE_DATA                                0x05c
+#define MV64340_PCI_X_COMMAND                                       0x060
+#define MV64340_PCI_X_STATUS                                        0x064
+#define MV64340_PCI_COMPACT_PCI_HOT_SWAP                            0x068
+
+/***********************************************/
+/*   PCI Configuration, Function 1, Registers  */
+/***********************************************/
+
+#define MV64340_PCI_SCS_2_BASE_ADDR_LOW   			    0x110
+#define MV64340_PCI_SCS_2_BASE_ADDR_HIGH			    0x114
+#define MV64340_PCI_SCS_3_BASE_ADDR_LOW 			    0x118
+#define MV64340_PCI_SCS_3_BASE_ADDR_HIGH			    0x11c
+#define MV64340_PCI_INTERNAL_SRAM_BASE_ADDR_LOW          	    0x120
+#define MV64340_PCI_INTERNAL_SRAM_BASE_ADDR_HIGH         	    0x124
+
+/***********************************************/
+/*  PCI Configuration, Function 2, Registers   */
+/***********************************************/
+
+#define MV64340_PCI_DEVCS_0_BASE_ADDR_LOW	    		    0x210
+#define MV64340_PCI_DEVCS_0_BASE_ADDR_HIGH 			    0x214
+#define MV64340_PCI_DEVCS_1_BASE_ADDR_LOW 			    0x218
+#define MV64340_PCI_DEVCS_1_BASE_ADDR_HIGH      		    0x21c
+#define MV64340_PCI_DEVCS_2_BASE_ADDR_LOW 			    0x220
+#define MV64340_PCI_DEVCS_2_BASE_ADDR_HIGH      		    0x224
+
+/***********************************************/
+/*  PCI Configuration, Function 3, Registers   */
+/***********************************************/
+
+#define MV64340_PCI_DEVCS_3_BASE_ADDR_LOW	    		    0x310
+#define MV64340_PCI_DEVCS_3_BASE_ADDR_HIGH 			    0x314
+#define MV64340_PCI_BOOT_CS_BASE_ADDR_LOW			    0x318
+#define MV64340_PCI_BOOT_CS_BASE_ADDR_HIGH      		    0x31c
+#define MV64340_PCI_CPU_BASE_ADDR_LOW 				    0x220
+#define MV64340_PCI_CPU_BASE_ADDR_HIGH      			    0x224
+
+/***********************************************/
+/*  PCI Configuration, Function 4, Registers   */
+/***********************************************/
+
+#define MV64340_PCI_P2P_MEM0_BASE_ADDR_LOW  			    0x410
+#define MV64340_PCI_P2P_MEM0_BASE_ADDR_HIGH 			    0x414
+#define MV64340_PCI_P2P_MEM1_BASE_ADDR_LOW   			    0x418
+#define MV64340_PCI_P2P_MEM1_BASE_ADDR_HIGH 			    0x41c
+#define MV64340_PCI_P2P_I_O_BASE_ADDR                 	            0x420
+#define MV64340_PCI_INTERNAL_REGS_I_O_MAPPED_BASE_ADDR              0x424
+
+/****************************************/
+/* Messaging Unit Registers (I20)   	*/
+/****************************************/
+
+#define MV64340_I2O_INBOUND_MESSAGE_REG0_PCI_0_SIDE		    0x010
+#define MV64340_I2O_INBOUND_MESSAGE_REG1_PCI_0_SIDE  		    0x014
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG0_PCI_0_SIDE 		    0x018
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG1_PCI_0_SIDE  		    0x01C
+#define MV64340_I2O_INBOUND_DOORBELL_REG_PCI_0_SIDE  		    0x020
+#define MV64340_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE          0x024
+#define MV64340_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE	    0x028
+#define MV64340_I2O_OUTBOUND_DOORBELL_REG_PCI_0_SIDE 		    0x02C
+#define MV64340_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE         0x030
+#define MV64340_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE          0x034
+#define MV64340_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE       0x040
+#define MV64340_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE      0x044
+#define MV64340_I2O_QUEUE_CONTROL_REG_PCI_0_SIDE 		    0x050
+#define MV64340_I2O_QUEUE_BASE_ADDR_REG_PCI_0_SIDE 		    0x054
+#define MV64340_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE        0x060
+#define MV64340_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE        0x064
+#define MV64340_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE        0x068
+#define MV64340_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE        0x06C
+#define MV64340_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE       0x070
+#define MV64340_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE       0x074
+#define MV64340_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE       0x0F8
+#define MV64340_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE       0x0FC
+
+#define MV64340_I2O_INBOUND_MESSAGE_REG0_PCI_1_SIDE		    0x090
+#define MV64340_I2O_INBOUND_MESSAGE_REG1_PCI_1_SIDE  		    0x094
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG0_PCI_1_SIDE 		    0x098
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG1_PCI_1_SIDE  		    0x09C
+#define MV64340_I2O_INBOUND_DOORBELL_REG_PCI_1_SIDE  		    0x0A0
+#define MV64340_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE          0x0A4
+#define MV64340_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE	    0x0A8
+#define MV64340_I2O_OUTBOUND_DOORBELL_REG_PCI_1_SIDE 		    0x0AC
+#define MV64340_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE         0x0B0
+#define MV64340_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE          0x0B4
+#define MV64340_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE       0x0C0
+#define MV64340_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE      0x0C4
+#define MV64340_I2O_QUEUE_CONTROL_REG_PCI_1_SIDE 		    0x0D0
+#define MV64340_I2O_QUEUE_BASE_ADDR_REG_PCI_1_SIDE 		    0x0D4
+#define MV64340_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE        0x0E0
+#define MV64340_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE        0x0E4
+#define MV64340_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE        0x0E8
+#define MV64340_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE        0x0EC
+#define MV64340_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE       0x0F0
+#define MV64340_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE       0x0F4
+#define MV64340_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE       0x078
+#define MV64340_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE       0x07C
+
+#define MV64340_I2O_INBOUND_MESSAGE_REG0_CPU0_SIDE		    0x1C10
+#define MV64340_I2O_INBOUND_MESSAGE_REG1_CPU0_SIDE  		    0x1C14
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG0_CPU0_SIDE 		    0x1C18
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG1_CPU0_SIDE  		    0x1C1C
+#define MV64340_I2O_INBOUND_DOORBELL_REG_CPU0_SIDE  		    0x1C20
+#define MV64340_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE  	    0x1C24
+#define MV64340_I2O_INBOUND_INTERRUPT_MASK_REG_CPU0_SIDE	    0x1C28
+#define MV64340_I2O_OUTBOUND_DOORBELL_REG_CPU0_SIDE 		    0x1C2C
+#define MV64340_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE          0x1C30
+#define MV64340_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU0_SIDE           0x1C34
+#define MV64340_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE        0x1C40
+#define MV64340_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE       0x1C44
+#define MV64340_I2O_QUEUE_CONTROL_REG_CPU0_SIDE 		    0x1C50
+#define MV64340_I2O_QUEUE_BASE_ADDR_REG_CPU0_SIDE 		    0x1C54
+#define MV64340_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE         0x1C60
+#define MV64340_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE         0x1C64
+#define MV64340_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE         0x1C68
+#define MV64340_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE         0x1C6C
+#define MV64340_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE        0x1C70
+#define MV64340_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE        0x1C74
+#define MV64340_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE        0x1CF8
+#define MV64340_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE        0x1CFC
+#define MV64340_I2O_INBOUND_MESSAGE_REG0_CPU1_SIDE		    0x1C90
+#define MV64340_I2O_INBOUND_MESSAGE_REG1_CPU1_SIDE  		    0x1C94
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG0_CPU1_SIDE 		    0x1C98
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG1_CPU1_SIDE  		    0x1C9C
+#define MV64340_I2O_INBOUND_DOORBELL_REG_CPU1_SIDE  		    0x1CA0
+#define MV64340_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE  	    0x1CA4
+#define MV64340_I2O_INBOUND_INTERRUPT_MASK_REG_CPU1_SIDE	    0x1CA8
+#define MV64340_I2O_OUTBOUND_DOORBELL_REG_CPU1_SIDE 		    0x1CAC
+#define MV64340_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE          0x1CB0
+#define MV64340_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU1_SIDE           0x1CB4
+#define MV64340_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE        0x1CC0
+#define MV64340_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE       0x1CC4
+#define MV64340_I2O_QUEUE_CONTROL_REG_CPU1_SIDE 		    0x1CD0
+#define MV64340_I2O_QUEUE_BASE_ADDR_REG_CPU1_SIDE 		    0x1CD4
+#define MV64340_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE         0x1CE0
+#define MV64340_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE         0x1CE4
+#define MV64340_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE         0x1CE8
+#define MV64340_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE         0x1CEC
+#define MV64340_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE        0x1CF0
+#define MV64340_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE        0x1CF4
+#define MV64340_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE        0x1C78
+#define MV64340_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE        0x1C7C
+
+/****************************************/
+/*        Ethernet Unit Registers  		*/
+/****************************************/
+
+/*******************************************/
+/*          CUNIT  Registers               */
+/*******************************************/
+
+         /* Address Decoding Register Map */
+           
+#define MV64340_CUNIT_BASE_ADDR_REG0                                0xf200
+#define MV64340_CUNIT_BASE_ADDR_REG1                                0xf208
+#define MV64340_CUNIT_BASE_ADDR_REG2                                0xf210
+#define MV64340_CUNIT_BASE_ADDR_REG3                                0xf218
+#define MV64340_CUNIT_SIZE0                                         0xf204
+#define MV64340_CUNIT_SIZE1                                         0xf20c
+#define MV64340_CUNIT_SIZE2                                         0xf214
+#define MV64340_CUNIT_SIZE3                                         0xf21c
+#define MV64340_CUNIT_HIGH_ADDR_REMAP_REG0                          0xf240
+#define MV64340_CUNIT_HIGH_ADDR_REMAP_REG1                          0xf244
+#define MV64340_CUNIT_BASE_ADDR_ENABLE_REG                          0xf250
+#define MV64340_MPSC0_ACCESS_PROTECTION_REG                         0xf254
+#define MV64340_MPSC1_ACCESS_PROTECTION_REG                         0xf258
+#define MV64340_CUNIT_INTERNAL_SPACE_BASE_ADDR_REG                  0xf25C
+
+        /*  Error Report Registers  */
+
+#define MV64340_CUNIT_INTERRUPT_CAUSE_REG                           0xf310
+#define MV64340_CUNIT_INTERRUPT_MASK_REG                            0xf314
+#define MV64340_CUNIT_ERROR_ADDR                                    0xf318
+
+        /*  Cunit Control Registers */
+
+#define MV64340_CUNIT_ARBITER_CONTROL_REG                           0xf300
+#define MV64340_CUNIT_CONFIG_REG                                    0xb40c
+#define MV64340_CUNIT_CRROSBAR_TIMEOUT_REG                          0xf304
+
+        /*  Cunit Debug Registers   */
+
+#define MV64340_CUNIT_DEBUG_LOW                                     0xf340
+#define MV64340_CUNIT_DEBUG_HIGH                                    0xf344
+#define MV64340_CUNIT_MMASK                                         0xf380
+
+        /*  MPSCs Clocks Routing Registers  */
+
+#define MV64340_MPSC_ROUTING_REG                                    0xb400
+#define MV64340_MPSC_RX_CLOCK_ROUTING_REG                           0xb404
+#define MV64340_MPSC_TX_CLOCK_ROUTING_REG                           0xb408
+
+        /*  MPSCs Interrupts Registers    */
+
+#define MV64340_MPSC_CAUSE_REG(port)                               (0xb804 + (port<<3))
+#define MV64340_MPSC_MASK_REG(port)                                (0xb884 + (port<<3))
+ 
+#define MV64340_MPSC_MAIN_CONFIG_LOW(port)                         (0x8000 + (port<<12))
+#define MV64340_MPSC_MAIN_CONFIG_HIGH(port)                        (0x8004 + (port<<12))    
+#define MV64340_MPSC_PROTOCOL_CONFIG(port)                         (0x8008 + (port<<12))    
+#define MV64340_MPSC_CHANNEL_REG1(port)                            (0x800c + (port<<12))    
+#define MV64340_MPSC_CHANNEL_REG2(port)                            (0x8010 + (port<<12))    
+#define MV64340_MPSC_CHANNEL_REG3(port)                            (0x8014 + (port<<12))    
+#define MV64340_MPSC_CHANNEL_REG4(port)                            (0x8018 + (port<<12))    
+#define MV64340_MPSC_CHANNEL_REG5(port)                            (0x801c + (port<<12))    
+#define MV64340_MPSC_CHANNEL_REG6(port)                            (0x8020 + (port<<12))    
+#define MV64340_MPSC_CHANNEL_REG7(port)                            (0x8024 + (port<<12))    
+#define MV64340_MPSC_CHANNEL_REG8(port)                            (0x8028 + (port<<12))    
+#define MV64340_MPSC_CHANNEL_REG9(port)                            (0x802c + (port<<12))    
+#define MV64340_MPSC_CHANNEL_REG10(port)                           (0x8030 + (port<<12))    
+        
+        /*  MPSC0 Registers      */
+
+
+/***************************************/
+/*          SDMA Registers             */
+/***************************************/
+
+#define MV64340_SDMA_CONFIG_REG(channel)                        (0x4000 + (channel<<13))        
+#define MV64340_SDMA_COMMAND_REG(channel)                       (0x4008 + (channel<<13))        
+#define MV64340_SDMA_CURRENT_RX_DESCRIPTOR_POINTER(channel)     (0x4810 + (channel<<13))        
+#define MV64340_SDMA_CURRENT_TX_DESCRIPTOR_POINTER(channel)     (0x4c10 + (channel<<13))        
+#define MV64340_SDMA_FIRST_TX_DESCRIPTOR_POINTER(channel)       (0x4c14 + (channel<<13)) 
+
+#define MV64340_SDMA_CAUSE_REG                                      0xb800
+#define MV64340_SDMA_MASK_REG                                       0xb880
+         
+/* BRG Interrupts */
+
+#define MV64340_BRG_CONFIG_REG(brg)                              (0xb200 + (brg<<3))
+#define MV64340_BRG_BAUDE_TUNING_REG(brg)                        (0xb208 + (brg<<3))
+#define MV64340_BRG_CAUSE_REG                                       0xb834
+#define MV64340_BRG_MASK_REG                                        0xb8b4
+
+/****************************************/
+/* DMA Channel Control			*/
+/****************************************/
+
+#define MV64340_DMA_CHANNEL0_CONTROL 				    0x840
+#define MV64340_DMA_CHANNEL0_CONTROL_HIGH			    0x880
+#define MV64340_DMA_CHANNEL1_CONTROL 				    0x844
+#define MV64340_DMA_CHANNEL1_CONTROL_HIGH			    0x884
+#define MV64340_DMA_CHANNEL2_CONTROL 				    0x848
+#define MV64340_DMA_CHANNEL2_CONTROL_HIGH			    0x888
+#define MV64340_DMA_CHANNEL3_CONTROL 				    0x84C
+#define MV64340_DMA_CHANNEL3_CONTROL_HIGH			    0x88C
+
+
+/****************************************/
+/*           IDMA Registers             */
+/****************************************/
+
+#define MV64340_DMA_CHANNEL0_BYTE_COUNT                             0x800
+#define MV64340_DMA_CHANNEL1_BYTE_COUNT                             0x804
+#define MV64340_DMA_CHANNEL2_BYTE_COUNT                             0x808
+#define MV64340_DMA_CHANNEL3_BYTE_COUNT                             0x80C
+#define MV64340_DMA_CHANNEL0_SOURCE_ADDR                            0x810
+#define MV64340_DMA_CHANNEL1_SOURCE_ADDR                            0x814
+#define MV64340_DMA_CHANNEL2_SOURCE_ADDR                            0x818
+#define MV64340_DMA_CHANNEL3_SOURCE_ADDR                            0x81c
+#define MV64340_DMA_CHANNEL0_DESTINATION_ADDR                       0x820
+#define MV64340_DMA_CHANNEL1_DESTINATION_ADDR                       0x824
+#define MV64340_DMA_CHANNEL2_DESTINATION_ADDR                       0x828
+#define MV64340_DMA_CHANNEL3_DESTINATION_ADDR                       0x82C
+#define MV64340_DMA_CHANNEL0_NEXT_DESCRIPTOR_POINTER                0x830
+#define MV64340_DMA_CHANNEL1_NEXT_DESCRIPTOR_POINTER                0x834
+#define MV64340_DMA_CHANNEL2_NEXT_DESCRIPTOR_POINTER                0x838
+#define MV64340_DMA_CHANNEL3_NEXT_DESCRIPTOR_POINTER                0x83C
+#define MV64340_DMA_CHANNEL0_CURRENT_DESCRIPTOR_POINTER             0x870
+#define MV64340_DMA_CHANNEL1_CURRENT_DESCRIPTOR_POINTER             0x874
+#define MV64340_DMA_CHANNEL2_CURRENT_DESCRIPTOR_POINTER             0x878
+#define MV64340_DMA_CHANNEL3_CURRENT_DESCRIPTOR_POINTER             0x87C
+
+ /*  IDMA Address Decoding Base Address Registers  */
+ 
+#define MV64340_DMA_BASE_ADDR_REG0                                  0xa00
+#define MV64340_DMA_BASE_ADDR_REG1                                  0xa08
+#define MV64340_DMA_BASE_ADDR_REG2                                  0xa10
+#define MV64340_DMA_BASE_ADDR_REG3                                  0xa18
+#define MV64340_DMA_BASE_ADDR_REG4                                  0xa20
+#define MV64340_DMA_BASE_ADDR_REG5                                  0xa28
+#define MV64340_DMA_BASE_ADDR_REG6                                  0xa30
+#define MV64340_DMA_BASE_ADDR_REG7                                  0xa38
+ 
+ /*  IDMA Address Decoding Size Address Register   */
+ 
+#define MV64340_DMA_SIZE_REG0                                       0xa04
+#define MV64340_DMA_SIZE_REG1                                       0xa0c
+#define MV64340_DMA_SIZE_REG2                                       0xa14
+#define MV64340_DMA_SIZE_REG3                                       0xa1c
+#define MV64340_DMA_SIZE_REG4                                       0xa24
+#define MV64340_DMA_SIZE_REG5                                       0xa2c
+#define MV64340_DMA_SIZE_REG6                                       0xa34
+#define MV64340_DMA_SIZE_REG7                                       0xa3C
+
+ /* IDMA Address Decoding High Address Remap and Access 
+                  Protection Registers                    */
+                  
+#define MV64340_DMA_HIGH_ADDR_REMAP_REG0                            0xa60
+#define MV64340_DMA_HIGH_ADDR_REMAP_REG1                            0xa64
+#define MV64340_DMA_HIGH_ADDR_REMAP_REG2                            0xa68
+#define MV64340_DMA_HIGH_ADDR_REMAP_REG3                            0xa6C
+#define MV64340_DMA_BASE_ADDR_ENABLE_REG                            0xa80
+#define MV64340_DMA_CHANNEL0_ACCESS_PROTECTION_REG                  0xa70
+#define MV64340_DMA_CHANNEL1_ACCESS_PROTECTION_REG                  0xa74
+#define MV64340_DMA_CHANNEL2_ACCESS_PROTECTION_REG                  0xa78
+#define MV64340_DMA_CHANNEL3_ACCESS_PROTECTION_REG                  0xa7c
+#define MV64340_DMA_ARBITER_CONTROL                                 0x860
+#define MV64340_DMA_CROSS_BAR_TIMEOUT                               0x8d0
+
+ /*  IDMA Headers Retarget Registers   */
+
+#define MV64340_DMA_HEADERS_RETARGET_CONTROL                        0xa84
+#define MV64340_DMA_HEADERS_RETARGET_BASE                           0xa88
+
+ /*  IDMA Interrupt Register  */
+
+#define MV64340_DMA_INTERRUPT_CAUSE_REG                             0x8c0
+#define MV64340_DMA_INTERRUPT_CAUSE_MASK                            0x8c4
+#define MV64340_DMA_ERROR_ADDR                                      0x8c8
+#define MV64340_DMA_ERROR_SELECT                                    0x8cc
+
+ /*  IDMA Debug Register ( for internal use )    */
+
+#define MV64340_DMA_DEBUG_LOW                                       0x8e0
+#define MV64340_DMA_DEBUG_HIGH                                      0x8e4
+#define MV64340_DMA_SPARE                                           0xA8C
+
+/****************************************/
+/* Timer_Counter 			*/
+/****************************************/
+
+#define MV64340_TIMER_COUNTER0					    0x850
+#define MV64340_TIMER_COUNTER1					    0x854
+#define MV64340_TIMER_COUNTER2					    0x858
+#define MV64340_TIMER_COUNTER3					    0x85C
+#define MV64340_TIMER_COUNTER_0_3_CONTROL			    0x864
+#define MV64340_TIMER_COUNTER_0_3_INTERRUPT_CAUSE		    0x868
+#define MV64340_TIMER_COUNTER_0_3_INTERRUPT_MASK      		    0x86c
+
+/****************************************/
+/*         Watchdog registers  	        */
+/****************************************/
+
+#define MV64340_WATCHDOG_CONFIG_REG                                 0xb410
+#define MV64340_WATCHDOG_VALUE_REG                                  0xb414
+
+/****************************************/
+/* I2C Registers                        */
+/****************************************/
+
+#define MV64XXX_I2C_OFFSET                                          0xc000
+#define MV64XXX_I2C_REG_BLOCK_SIZE                                  0x0020
+
+/****************************************/
+/* GPP Interface Registers              */
+/****************************************/
+
+#define MV64340_GPP_IO_CONTROL                                      0xf100
+#define MV64340_GPP_LEVEL_CONTROL                                   0xf110
+#define MV64340_GPP_VALUE                                           0xf104
+#define MV64340_GPP_INTERRUPT_CAUSE                                 0xf108
+#define MV64340_GPP_INTERRUPT_MASK0                                 0xf10c
+#define MV64340_GPP_INTERRUPT_MASK1                                 0xf114
+#define MV64340_GPP_VALUE_SET                                       0xf118
+#define MV64340_GPP_VALUE_CLEAR                                     0xf11c
+
+/****************************************/
+/* Interrupt Controller Registers       */
+/****************************************/
+
+/****************************************/
+/* Interrupts	  			*/
+/****************************************/
+
+#define MV64340_MAIN_INTERRUPT_CAUSE_LOW                            0x004
+#define MV64340_MAIN_INTERRUPT_CAUSE_HIGH                           0x00c
+#define MV64340_CPU_INTERRUPT0_MASK_LOW                             0x014
+#define MV64340_CPU_INTERRUPT0_MASK_HIGH                            0x01c
+#define MV64340_CPU_INTERRUPT0_SELECT_CAUSE                         0x024
+#define MV64340_CPU_INTERRUPT1_MASK_LOW                             0x034
+#define MV64340_CPU_INTERRUPT1_MASK_HIGH                            0x03c
+#define MV64340_CPU_INTERRUPT1_SELECT_CAUSE                         0x044
+#define MV64340_INTERRUPT0_MASK_0_LOW                               0x054
+#define MV64340_INTERRUPT0_MASK_0_HIGH                              0x05c
+#define MV64340_INTERRUPT0_SELECT_CAUSE                             0x064
+#define MV64340_INTERRUPT1_MASK_0_LOW                               0x074
+#define MV64340_INTERRUPT1_MASK_0_HIGH                              0x07c
+#define MV64340_INTERRUPT1_SELECT_CAUSE                             0x084
+
+/****************************************/
+/*      MPP Interface Registers         */
+/****************************************/
+
+#define MV64340_MPP_CONTROL0                                        0xf000
+#define MV64340_MPP_CONTROL1                                        0xf004
+#define MV64340_MPP_CONTROL2                                        0xf008
+#define MV64340_MPP_CONTROL3                                        0xf00c
+
+/****************************************/
+/*    Serial Initialization registers   */
+/****************************************/
+
+#define MV64340_SERIAL_INIT_LAST_DATA                               0xf324
+#define MV64340_SERIAL_INIT_CONTROL                                 0xf328
+#define MV64340_SERIAL_INIT_STATUS                                  0xf32c
+
+extern void mv64340_irq_init(unsigned int base);
+
+/* MPSC Platform Device, Driver Data (Shared register regions) */
+#define	MPSC_SHARED_NAME		"mpsc_shared"
+
+#define	MPSC_ROUTING_BASE_ORDER		0
+#define	MPSC_SDMA_INTR_BASE_ORDER	1
+
+#define MPSC_ROUTING_REG_BLOCK_SIZE	0x000c
+#define MPSC_SDMA_INTR_REG_BLOCK_SIZE	0x0084
+
+struct mpsc_shared_pdata {
+	u32	mrr_val;
+	u32	rcrr_val;
+	u32	tcrr_val;
+	u32	intr_cause_val;
+	u32	intr_mask_val;
+};
+
+/* MPSC Platform Device, Driver Data */
+#define	MPSC_CTLR_NAME			"mpsc"
+
+#define	MPSC_BASE_ORDER			0
+#define	MPSC_SDMA_BASE_ORDER		1
+#define	MPSC_BRG_BASE_ORDER		2
+
+#define MPSC_REG_BLOCK_SIZE		0x0038
+#define MPSC_SDMA_REG_BLOCK_SIZE	0x0c18
+#define MPSC_BRG_REG_BLOCK_SIZE		0x0008
+
+struct mpsc_pdata {
+	u8	mirror_regs;
+	u8	cache_mgmt;
+	u8	max_idle;
+	int	default_baud;
+	int	default_bits;
+	int	default_parity;
+	int	default_flow;
+	u32	chr_1_val;
+	u32	chr_2_val;
+	u32	chr_10_val;
+	u32	mpcr_val;
+	u32	bcr_val;
+	u8	brg_can_tune;
+	u8	brg_clk_src;
+	u32	brg_clk_freq;
+};
+
+/* Watchdog Platform Device, Driver Data */
+#define	MV64x60_WDT_NAME			"mv64x60_wdt"
+
+struct mv64x60_wdt_pdata {
+	int	timeout;	/* watchdog expiry in seconds, default 10 */
+	int	bus_clk;	/* bus clock in MHz, default 133 */
+};
+
+#endif /* __ASM_MV643XX_H */
diff --git a/include/linux/mv643xx_eth.h b/include/linux/mv643xx_eth.h
new file mode 100644
index 00000000..30b0c4e7
--- /dev/null
+++ b/include/linux/mv643xx_eth.h
@@ -0,0 +1,83 @@
+/*
+ * MV-643XX ethernet platform device data definition file.
+ */
+
+#ifndef __LINUX_MV643XX_ETH_H
+#define __LINUX_MV643XX_ETH_H
+
+#include <linux/mbus.h>
+
+#define MV643XX_ETH_SHARED_NAME		"mv643xx_eth"
+#define MV643XX_ETH_NAME		"mv643xx_eth_port"
+#define MV643XX_ETH_SHARED_REGS		0x2000
+#define MV643XX_ETH_SHARED_REGS_SIZE	0x2000
+#define MV643XX_ETH_BAR_4		0x2220
+#define MV643XX_ETH_SIZE_REG_4		0x2224
+#define MV643XX_ETH_BASE_ADDR_ENABLE_REG	0x2290
+
+struct mv643xx_eth_shared_platform_data {
+	struct mbus_dram_target_info	*dram;
+	struct platform_device	*shared_smi;
+	unsigned int		t_clk;
+	/*
+	 * Max packet size for Tx IP/Layer 4 checksum, when set to 0, default
+	 * limit of 9KiB will be used.
+	 */
+	int			tx_csum_limit;
+};
+
+#define MV643XX_ETH_PHY_ADDR_DEFAULT	0
+#define MV643XX_ETH_PHY_ADDR(x)		(0x80 | (x))
+#define MV643XX_ETH_PHY_NONE		0xff
+
+struct mv643xx_eth_platform_data {
+	/*
+	 * Pointer back to our parent instance, and our port number.
+	 */
+	struct platform_device	*shared;
+	int			port_number;
+
+	/*
+	 * Whether a PHY is present, and if yes, at which address.
+	 */
+	int			phy_addr;
+
+	/*
+	 * Use this MAC address if it is valid, overriding the
+	 * address that is already in the hardware.
+	 */
+	u8			mac_addr[6];
+
+	/*
+	 * If speed is 0, autonegotiation is enabled.
+	 *   Valid values for speed: 0, SPEED_10, SPEED_100, SPEED_1000.
+	 *   Valid values for duplex: DUPLEX_HALF, DUPLEX_FULL.
+	 */
+	int			speed;
+	int			duplex;
+
+	/*
+	 * How many RX/TX queues to use.
+	 */
+	int			rx_queue_count;
+	int			tx_queue_count;
+
+	/*
+	 * Override default RX/TX queue sizes if nonzero.
+	 */
+	int			rx_queue_size;
+	int			tx_queue_size;
+
+	/*
+	 * Use on-chip SRAM for RX/TX descriptors if size is nonzero
+	 * and sufficient to contain all descriptors for the requested
+	 * ring sizes.
+	 */
+	unsigned long		rx_sram_addr;
+	int			rx_sram_size;
+	unsigned long		tx_sram_addr;
+	int			tx_sram_size;
+};
+
+
+#endif
diff --git a/include/linux/mv643xx_i2c.h b/include/linux/mv643xx_i2c.h
new file mode 100644
index 00000000..5db5152e
--- /dev/null
+++ b/include/linux/mv643xx_i2c.h
@@ -0,0 +1,22 @@
+/*
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef _MV64XXX_I2C_H_
+#define _MV64XXX_I2C_H_
+
+#include <linux/types.h>
+
+#define MV64XXX_I2C_CTLR_NAME	"mv64xxx_i2c"
+
+/* i2c Platform Device, Driver Data */
+struct mv64xxx_i2c_pdata {
+	u32	freq_m;
+	u32	freq_n;
+	u32	timeout;	/* In milliseconds */
+};
+
+#endif /*_MV64XXX_I2C_H_*/
diff --git a/include/linux/mxm-wmi.h b/include/linux/mxm-wmi.h
new file mode 100644
index 00000000..617a2950
--- /dev/null
+++ b/include/linux/mxm-wmi.h
@@ -0,0 +1,33 @@
+/*
+ * MXM WMI driver
+ *
+ * Copyright(C) 2010 Red Hat.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef MXM_WMI_H
+#define MXM_WMI_H
+
+/* discrete adapters */
+#define MXM_MXDS_ADAPTER_0 0x0
+#define MXM_MXDS_ADAPTER_1 0x0
+/* integrated adapter */
+#define MXM_MXDS_ADAPTER_IGD 0x10
+int mxm_wmi_call_mxds(int adapter);
+int mxm_wmi_call_mxmx(int adapter);
+bool mxm_wmi_supported(void);
+
+#endif
diff --git a/include/linux/n_r3964.h b/include/linux/n_r3964.h
new file mode 100644
index 00000000..54b8e0d8
--- /dev/null
+++ b/include/linux/n_r3964.h
@@ -0,0 +1,231 @@
+/* r3964 linediscipline for linux
+ *
+ * -----------------------------------------------------------
+ * Copyright by
+ * Philips Automation Projects
+ * Kassel (Germany)
+ * -----------------------------------------------------------
+ * This software may be used and distributed according to the terms of
+ * the GNU General Public License, incorporated herein by reference.
+ *
+ * Author:
+ * L. Haag
+ *
+ * $Log: r3964.h,v $
+ * Revision 1.4  2005/12/21 19:54:24  Kurt Huwig <kurt huwig de>
+ * Fixed HZ usage on 2.6 kernels
+ * Removed unnecessary include
+ *
+ * Revision 1.3  2001/03/18 13:02:24  dwmw2
+ * Fix timer usage, use spinlocks properly.
+ *
+ * Revision 1.2  2001/03/18 12:53:15  dwmw2
+ * Merge changes in 2.4.2
+ *
+ * Revision 1.1.1.1  1998/10/13 16:43:14  dwmw2
+ * This'll screw the version control
+ *
+ * Revision 1.6  1998/09/30 00:40:38  dwmw2
+ * Updated to use kernel's N_R3964 if available
+ *
+ * Revision 1.4  1998/04/02 20:29:44  lhaag
+ * select, blocking, ...
+ *
+ * Revision 1.3  1998/02/12 18:58:43  root
+ * fixed some memory leaks
+ * calculation of checksum characters
+ *
+ * Revision 1.2  1998/02/07 13:03:17  root
+ * ioctl read_telegram
+ *
+ * Revision 1.1  1998/02/06 19:19:43  root
+ * Initial revision
+ *
+ *
+ */
+
+#ifndef __LINUX_N_R3964_H__
+#define __LINUX_N_R3964_H__
+
+/* line disciplines for r3964 protocol */
+
+#ifdef __KERNEL__
+
+#include <linux/param.h>
+
+/*
+ * Common ascii handshake characters:
+ */
+
+#define STX 0x02
+#define ETX 0x03
+#define DLE 0x10
+#define NAK 0x15
+
+/*
+ * Timeouts (from milliseconds to jiffies)
+ */
+
+#define R3964_TO_QVZ ((550)*HZ/1000)
+#define R3964_TO_ZVZ ((220)*HZ/1000)
+#define R3964_TO_NO_BUF ((400)*HZ/1000)
+#define R3964_NO_TX_ROOM ((100)*HZ/1000)
+#define R3964_TO_RX_PANIC ((4000)*HZ/1000)
+#define R3964_MAX_RETRIES 5
+
+#endif
+
+/*
+ * Ioctl-commands
+ */
+
+#define R3964_ENABLE_SIGNALS      0x5301
+#define R3964_SETPRIORITY         0x5302
+#define R3964_USE_BCC             0x5303
+#define R3964_READ_TELEGRAM       0x5304
+
+/* Options for R3964_SETPRIORITY */
+#define R3964_MASTER   0
+#define R3964_SLAVE    1
+
+/* Options for R3964_ENABLE_SIGNALS */
+#define R3964_SIG_ACK   0x0001
+#define R3964_SIG_DATA  0x0002
+#define R3964_SIG_ALL   0x000f
+#define R3964_SIG_NONE  0x0000
+#define R3964_USE_SIGIO 0x1000
+
+/*
+ * r3964 operation states:
+ */
+#ifdef __KERNEL__
+
+enum { R3964_IDLE, 
+	   R3964_TX_REQUEST, R3964_TRANSMITTING, 
+	   R3964_WAIT_ZVZ_BEFORE_TX_RETRY, R3964_WAIT_FOR_TX_ACK,
+	   R3964_WAIT_FOR_RX_BUF,
+	   R3964_RECEIVING, R3964_WAIT_FOR_BCC, R3964_WAIT_FOR_RX_REPEAT
+	   };
+
+/*
+ * All open file-handles are 'clients' and are stored in a linked list:
+ */
+
+struct r3964_message;
+
+struct r3964_client_info {
+	spinlock_t     lock;
+	struct pid    *pid;
+	unsigned int   sig_flags;
+
+	struct r3964_client_info *next;
+
+	struct r3964_message *first_msg;
+	struct r3964_message *last_msg;
+	struct r3964_block_header *next_block_to_read;
+	int            msg_count;
+};
+
+
+#endif
+
+/* types for msg_id: */
+enum {R3964_MSG_ACK=1, R3964_MSG_DATA };
+
+#define R3964_MAX_MSG_COUNT 32
+
+/* error codes for client messages */
+#define R3964_OK 0        /* no error. */
+#define R3964_TX_FAIL -1  /* transmission error, block NOT sent */
+#define R3964_OVERFLOW -2 /* msg queue overflow */
+
+/* the client gets this struct when calling read(fd,...): */
+struct r3964_client_message {
+	  int     msg_id;
+	  int     arg;
+	  int     error_code;
+};
+
+#define R3964_MTU      256
+
+
+#ifdef __KERNEL__
+
+struct r3964_block_header;
+
+/* internal version of client_message: */
+struct r3964_message {
+	  int     msg_id;
+	  int     arg;
+	  int     error_code;
+	  struct r3964_block_header *block;
+	  struct r3964_message *next;
+};
+
+/*
+ * Header of received block in rx_buf/tx_buf:
+ */
+
+struct r3964_block_header 
+{
+	unsigned int length;             /* length in chars without header */
+	unsigned char *data;             /* usually data is located 
+                                        immediately behind this struct */
+	unsigned int locks;              /* only used in rx_buffer */
+	  
+    struct r3964_block_header *next;
+	struct r3964_client_info *owner;  /* =NULL in rx_buffer */
+};
+
+/*
+ * If rx_buf hasn't enough space to store R3964_MTU chars,
+ * we will reject all incoming STX-requests by sending NAK.
+ */
+
+#define RX_BUF_SIZE    4000
+#define TX_BUF_SIZE    4000
+#define R3964_MAX_BLOCKS_IN_RX_QUEUE 100
+
+#define R3964_PARITY 0x0001
+#define R3964_FRAME  0x0002
+#define R3964_OVERRUN 0x0004
+#define R3964_UNKNOWN 0x0008
+#define R3964_BREAK   0x0010
+#define R3964_CHECKSUM 0x0020
+#define R3964_ERROR  0x003f
+#define R3964_BCC   0x4000
+#define R3964_DEBUG 0x8000
+
+
+struct r3964_info {
+	spinlock_t     lock;
+	struct tty_struct *tty;
+	unsigned char priority;
+	unsigned char *rx_buf;            /* ring buffer */
+	unsigned char *tx_buf;
+
+	wait_queue_head_t read_wait;
+	//struct wait_queue *read_wait;
+
+	struct r3964_block_header *rx_first;
+	struct r3964_block_header *rx_last;
+	struct r3964_block_header *tx_first;
+	struct r3964_block_header *tx_last;
+	unsigned int tx_position;
+        unsigned int rx_position;
+	unsigned char last_rx;
+	unsigned char bcc;
+        unsigned int  blocks_in_rx_queue;
+	  
+	
+	struct r3964_client_info *firstClient;
+	unsigned int state;
+	unsigned int flags;
+
+	struct timer_list tmr;
+	int nRetry;
+};
+
+#endif	
+
+#endif
diff --git a/include/linux/namei.h b/include/linux/namei.h
new file mode 100644
index 00000000..ffc02135
--- /dev/null
+++ b/include/linux/namei.h
@@ -0,0 +1,112 @@
+#ifndef _LINUX_NAMEI_H
+#define _LINUX_NAMEI_H
+
+#include <linux/dcache.h>
+#include <linux/linkage.h>
+#include <linux/path.h>
+
+struct vfsmount;
+
+struct open_intent {
+	int	flags;
+	int	create_mode;
+	struct file *file;
+};
+
+enum { MAX_NESTED_LINKS = 8 };
+
+struct nameidata {
+	struct path	path;
+	struct qstr	last;
+	struct path	root;
+	struct inode	*inode; /* path.dentry.d_inode */
+	unsigned int	flags;
+	unsigned	seq;
+	int		last_type;
+	unsigned	depth;
+	char *saved_names[MAX_NESTED_LINKS + 1];
+
+	/* Intent data */
+	union {
+		struct open_intent open;
+	} intent;
+};
+
+/*
+ * Type of the last component on LOOKUP_PARENT
+ */
+enum {LAST_NORM, LAST_ROOT, LAST_DOT, LAST_DOTDOT, LAST_BIND};
+
+/*
+ * The bitmask for a lookup event:
+ *  - follow links at the end
+ *  - require a directory
+ *  - ending slashes ok even for nonexistent files
+ *  - internal "there are more path components" flag
+ *  - dentry cache is untrusted; force a real lookup
+ *  - suppress terminal automount
+ */
+#define LOOKUP_FOLLOW		0x0001
+#define LOOKUP_DIRECTORY	0x0002
+#define LOOKUP_AUTOMOUNT	0x0004
+
+#define LOOKUP_PARENT		0x0010
+#define LOOKUP_REVAL		0x0020
+#define LOOKUP_RCU		0x0040
+
+/*
+ * Intent data
+ */
+#define LOOKUP_OPEN		0x0100
+#define LOOKUP_CREATE		0x0200
+#define LOOKUP_EXCL		0x0400
+#define LOOKUP_RENAME_TARGET	0x0800
+
+#define LOOKUP_JUMPED		0x1000
+#define LOOKUP_ROOT		0x2000
+#define LOOKUP_EMPTY		0x4000
+
+extern int user_path_at(int, const char __user *, unsigned, struct path *);
+extern int user_path_at_empty(int, const char __user *, unsigned, struct path *, int *empty);
+
+#define user_path(name, path) user_path_at(AT_FDCWD, name, LOOKUP_FOLLOW, path)
+#define user_lpath(name, path) user_path_at(AT_FDCWD, name, 0, path)
+#define user_path_dir(name, path) \
+	user_path_at(AT_FDCWD, name, LOOKUP_FOLLOW | LOOKUP_DIRECTORY, path)
+
+extern int kern_path(const char *, unsigned, struct path *);
+
+extern struct dentry *kern_path_create(int, const char *, struct path *, int);
+extern struct dentry *user_path_create(int, const char __user *, struct path *, int);
+extern int kern_path_parent(const char *, struct nameidata *);
+extern int vfs_path_lookup(struct dentry *, struct vfsmount *,
+			   const char *, unsigned int, struct path *);
+
+extern struct file *lookup_instantiate_filp(struct nameidata *nd, struct dentry *dentry,
+		int (*open)(struct inode *, struct file *));
+
+extern struct dentry *lookup_one_len(const char *, struct dentry *, int);
+
+extern int follow_down_one(struct path *);
+extern int follow_down(struct path *);
+extern int follow_up(struct path *);
+
+extern struct dentry *lock_rename(struct dentry *, struct dentry *);
+extern void unlock_rename(struct dentry *, struct dentry *);
+
+static inline void nd_set_link(struct nameidata *nd, char *path)
+{
+	nd->saved_names[nd->depth] = path;
+}
+
+static inline char *nd_get_link(struct nameidata *nd)
+{
+	return nd->saved_names[nd->depth];
+}
+
+static inline void nd_terminate_link(void *name, size_t len, size_t maxlen)
+{
+	((char *) name)[min(len, maxlen)] = '\0';
+}
+
+#endif /* _LINUX_NAMEI_H */
diff --git a/include/linux/nbd.h b/include/linux/nbd.h
new file mode 100644
index 00000000..d146ca10
--- /dev/null
+++ b/include/linux/nbd.h
@@ -0,0 +1,102 @@
+/*
+ * 1999 Copyright (C) Pavel Machek, pavel@ucw.cz. This code is GPL.
+ * 1999/11/04 Copyright (C) 1999 VMware, Inc. (Regis "HPReg" Duchesne)
+ *            Made nbd_end_request() use the io_request_lock
+ * 2001 Copyright (C) Steven Whitehouse
+ *            New nbd_end_request() for compatibility with new linux block
+ *            layer code.
+ * 2003/06/24 Louis D. Langholtz <ldl@aros.net>
+ *            Removed unneeded blksize_bits field from nbd_device struct.
+ *            Cleanup PARANOIA usage & code.
+ * 2004/02/19 Paul Clements
+ *            Removed PARANOIA, plus various cleanup and comments
+ */
+
+#ifndef LINUX_NBD_H
+#define LINUX_NBD_H
+
+#include <linux/types.h>
+
+#define NBD_SET_SOCK	_IO( 0xab, 0 )
+#define NBD_SET_BLKSIZE	_IO( 0xab, 1 )
+#define NBD_SET_SIZE	_IO( 0xab, 2 )
+#define NBD_DO_IT	_IO( 0xab, 3 )
+#define NBD_CLEAR_SOCK	_IO( 0xab, 4 )
+#define NBD_CLEAR_QUE	_IO( 0xab, 5 )
+#define NBD_PRINT_DEBUG	_IO( 0xab, 6 )
+#define NBD_SET_SIZE_BLOCKS	_IO( 0xab, 7 )
+#define NBD_DISCONNECT  _IO( 0xab, 8 )
+#define NBD_SET_TIMEOUT _IO( 0xab, 9 )
+
+enum {
+	NBD_CMD_READ = 0,
+	NBD_CMD_WRITE = 1,
+	NBD_CMD_DISC = 2
+};
+
+#define nbd_cmd(req) ((req)->cmd[0])
+
+/* userspace doesn't need the nbd_device structure */
+#ifdef __KERNEL__
+
+#include <linux/wait.h>
+#include <linux/mutex.h>
+
+/* values for flags field */
+#define NBD_READ_ONLY 0x0001
+#define NBD_WRITE_NOCHK 0x0002
+
+struct request;
+
+struct nbd_device {
+	int flags;
+	int harderror;		/* Code of hard error			*/
+	struct socket * sock;
+	struct file * file; 	/* If == NULL, device is not ready, yet	*/
+	int magic;
+
+	spinlock_t queue_lock;
+	struct list_head queue_head;	/* Requests waiting result */
+	struct request *active_req;
+	wait_queue_head_t active_wq;
+	struct list_head waiting_queue;	/* Requests to be sent */
+	wait_queue_head_t waiting_wq;
+
+	struct mutex tx_lock;
+	struct gendisk *disk;
+	int blksize;
+	u64 bytesize;
+	pid_t pid; /* pid of nbd-client, if attached */
+	int xmit_timeout;
+};
+
+#endif
+
+/* These are sent over the network in the request/reply magic fields */
+
+#define NBD_REQUEST_MAGIC 0x25609513
+#define NBD_REPLY_MAGIC 0x67446698
+/* Do *not* use magics: 0x12560953 0x96744668. */
+
+/*
+ * This is the packet used for communication between client and
+ * server. All data are in network byte order.
+ */
+struct nbd_request {
+	__be32 magic;
+	__be32 type;	/* == READ || == WRITE 	*/
+	char handle[8];
+	__be64 from;
+	__be32 len;
+} __attribute__((packed));
+
+/*
+ * This is the reply packet that nbd-server sends back to the client after
+ * it has completed an I/O request (or an error occurs).
+ */
+struct nbd_reply {
+	__be32 magic;
+	__be32 error;		/* 0 = ok, else error	*/
+	char handle[8];		/* handle you got from request	*/
+};
+#endif
diff --git a/include/linux/ncp.h b/include/linux/ncp.h
new file mode 100644
index 00000000..99f0adee
--- /dev/null
+++ b/include/linux/ncp.h
@@ -0,0 +1,201 @@
+/*
+ *  ncp.h
+ *
+ *  Copyright (C) 1995 by Volker Lendecke
+ *  Modified for sparc by J.F. Chadima
+ *  Modified for __constant_ntoh by Frank A. Vorstenbosch
+ *
+ */
+
+#ifndef _LINUX_NCP_H
+#define _LINUX_NCP_H
+
+#include <linux/types.h>
+
+#define NCP_PTYPE                (0x11)
+#define NCP_PORT                 (0x0451)
+
+#define NCP_ALLOC_SLOT_REQUEST   (0x1111)
+#define NCP_REQUEST              (0x2222)
+#define NCP_DEALLOC_SLOT_REQUEST (0x5555)
+
+struct ncp_request_header {
+	__u16 type;
+	__u8 sequence;
+	__u8 conn_low;
+	__u8 task;
+	__u8 conn_high;
+	__u8 function;
+	__u8 data[0];
+} __attribute__((packed));
+
+#define NCP_REPLY                (0x3333)
+#define NCP_WATCHDOG		 (0x3E3E)
+#define NCP_POSITIVE_ACK         (0x9999)
+
+struct ncp_reply_header {
+	__u16 type;
+	__u8 sequence;
+	__u8 conn_low;
+	__u8 task;
+	__u8 conn_high;
+	__u8 completion_code;
+	__u8 connection_state;
+	__u8 data[0];
+} __attribute__((packed));
+
+#define NCP_VOLNAME_LEN (16)
+#define NCP_NUMBER_OF_VOLUMES (256)
+struct ncp_volume_info {
+	__u32 total_blocks;
+	__u32 free_blocks;
+	__u32 purgeable_blocks;
+	__u32 not_yet_purgeable_blocks;
+	__u32 total_dir_entries;
+	__u32 available_dir_entries;
+	__u8 sectors_per_block;
+	char volume_name[NCP_VOLNAME_LEN + 1];
+};
+
+#define AR_READ      (cpu_to_le16(1))
+#define AR_WRITE     (cpu_to_le16(2))
+#define AR_EXCLUSIVE (cpu_to_le16(0x20))
+
+#define NCP_FILE_ID_LEN 6
+
+/* Defines for Name Spaces */
+#define NW_NS_DOS     0
+#define NW_NS_MAC     1
+#define NW_NS_NFS     2
+#define NW_NS_FTAM    3
+#define NW_NS_OS2     4
+
+/*  Defines for ReturnInformationMask */
+#define RIM_NAME	      (cpu_to_le32(1))
+#define RIM_SPACE_ALLOCATED   (cpu_to_le32(2))
+#define RIM_ATTRIBUTES	      (cpu_to_le32(4))
+#define RIM_DATA_SIZE	      (cpu_to_le32(8))
+#define RIM_TOTAL_SIZE	      (cpu_to_le32(0x10))
+#define RIM_EXT_ATTR_INFO     (cpu_to_le32(0x20))
+#define RIM_ARCHIVE	      (cpu_to_le32(0x40))
+#define RIM_MODIFY	      (cpu_to_le32(0x80))
+#define RIM_CREATION	      (cpu_to_le32(0x100))
+#define RIM_OWNING_NAMESPACE  (cpu_to_le32(0x200))
+#define RIM_DIRECTORY	      (cpu_to_le32(0x400))
+#define RIM_RIGHTS	      (cpu_to_le32(0x800))
+#define RIM_ALL 	      (cpu_to_le32(0xFFF))
+#define RIM_COMPRESSED_INFO   (cpu_to_le32(0x80000000))
+
+/* Defines for NSInfoBitMask */
+#define NSIBM_NFS_NAME		0x0001
+#define NSIBM_NFS_MODE		0x0002
+#define NSIBM_NFS_GID		0x0004
+#define NSIBM_NFS_NLINKS	0x0008
+#define NSIBM_NFS_RDEV		0x0010
+#define NSIBM_NFS_LINK		0x0020
+#define NSIBM_NFS_CREATED	0x0040
+#define NSIBM_NFS_UID		0x0080
+#define NSIBM_NFS_ACSFLAG	0x0100
+#define NSIBM_NFS_MYFLAG	0x0200
+
+/* open/create modes */
+#define OC_MODE_OPEN	  0x01
+#define OC_MODE_TRUNCATE  0x02
+#define OC_MODE_REPLACE   0x02
+#define OC_MODE_CREATE	  0x08
+
+/* open/create results */
+#define OC_ACTION_NONE	   0x00
+#define OC_ACTION_OPEN	   0x01
+#define OC_ACTION_CREATE   0x02
+#define OC_ACTION_TRUNCATE 0x04
+#define OC_ACTION_REPLACE  0x04
+
+/* access rights attributes */
+#ifndef AR_READ_ONLY
+#define AR_READ_ONLY	   0x0001
+#define AR_WRITE_ONLY	   0x0002
+#define AR_DENY_READ	   0x0004
+#define AR_DENY_WRITE	   0x0008
+#define AR_COMPATIBILITY   0x0010
+#define AR_WRITE_THROUGH   0x0040
+#define AR_OPEN_COMPRESSED 0x0100
+#endif
+
+struct nw_nfs_info {
+	__u32 mode;
+	__u32 rdev;
+};
+
+struct nw_info_struct {
+	__u32 spaceAlloc;
+	__le32 attributes;
+	__u16 flags;
+	__le32 dataStreamSize;
+	__le32 totalStreamSize;
+	__u16 numberOfStreams;
+	__le16 creationTime;
+	__le16 creationDate;
+	__u32 creatorID;
+	__le16 modifyTime;
+	__le16 modifyDate;
+	__u32 modifierID;
+	__le16 lastAccessDate;
+	__u16 archiveTime;
+	__u16 archiveDate;
+	__u32 archiverID;
+	__u16 inheritedRightsMask;
+	__le32 dirEntNum;
+	__le32 DosDirNum;
+	__u32 volNumber;
+	__u32 EADataSize;
+	__u32 EAKeyCount;
+	__u32 EAKeySize;
+	__u32 NSCreator;
+	__u8 nameLen;
+	__u8 entryName[256];
+	/* libncp may depend on there being nothing after entryName */
+#ifdef __KERNEL__
+	struct nw_nfs_info nfs;
+#endif
+} __attribute__((packed));
+
+/* modify mask - use with MODIFY_DOS_INFO structure */
+#define DM_ATTRIBUTES		  (cpu_to_le32(0x02))
+#define DM_CREATE_DATE		  (cpu_to_le32(0x04))
+#define DM_CREATE_TIME		  (cpu_to_le32(0x08))
+#define DM_CREATOR_ID		  (cpu_to_le32(0x10))
+#define DM_ARCHIVE_DATE 	  (cpu_to_le32(0x20))
+#define DM_ARCHIVE_TIME 	  (cpu_to_le32(0x40))
+#define DM_ARCHIVER_ID		  (cpu_to_le32(0x80))
+#define DM_MODIFY_DATE		  (cpu_to_le32(0x0100))
+#define DM_MODIFY_TIME		  (cpu_to_le32(0x0200))
+#define DM_MODIFIER_ID		  (cpu_to_le32(0x0400))
+#define DM_LAST_ACCESS_DATE	  (cpu_to_le32(0x0800))
+#define DM_INHERITED_RIGHTS_MASK  (cpu_to_le32(0x1000))
+#define DM_MAXIMUM_SPACE	  (cpu_to_le32(0x2000))
+
+struct nw_modify_dos_info {
+	__le32 attributes;
+	__le16 creationDate;
+	__le16 creationTime;
+	__u32 creatorID;
+	__le16 modifyDate;
+	__le16 modifyTime;
+	__u32 modifierID;
+	__u16 archiveDate;
+	__u16 archiveTime;
+	__u32 archiverID;
+	__le16 lastAccessDate;
+	__u16 inheritanceGrantMask;
+	__u16 inheritanceRevokeMask;
+	__u32 maximumSpace;
+} __attribute__((packed));
+
+struct nw_search_sequence {
+	__u8 volNumber;
+	__u32 dirBase;
+	__u32 sequence;
+} __attribute__((packed));
+
+#endif				/* _LINUX_NCP_H */
diff --git a/include/linux/ncp_fs.h b/include/linux/ncp_fs.h
new file mode 100644
index 00000000..e13eefef
--- /dev/null
+++ b/include/linux/ncp_fs.h
@@ -0,0 +1,146 @@
+/*
+ *  ncp_fs.h
+ *
+ *  Copyright (C) 1995, 1996 by Volker Lendecke
+ *
+ */
+
+#ifndef _LINUX_NCP_FS_H
+#define _LINUX_NCP_FS_H
+
+#include <linux/fs.h>
+#include <linux/in.h>
+#include <linux/types.h>
+#include <linux/magic.h>
+
+#include <linux/ipx.h>
+#include <linux/ncp_no.h>
+
+/*
+ * ioctl commands
+ */
+
+struct ncp_ioctl_request {
+	unsigned int function;
+	unsigned int size;
+	char __user *data;
+};
+
+struct ncp_fs_info {
+	int version;
+	struct sockaddr_ipx addr;
+	__kernel_uid_t mounted_uid;
+	int connection;		/* Connection number the server assigned us */
+	int buffer_size;	/* The negotiated buffer size, to be
+				   used for read/write requests! */
+
+	int volume_number;
+	__le32 directory_id;
+};
+
+struct ncp_fs_info_v2 {
+	int version;
+	unsigned long mounted_uid;
+	unsigned int connection;
+	unsigned int buffer_size;
+
+	unsigned int volume_number;
+	__le32 directory_id;
+
+	__u32 dummy1;
+	__u32 dummy2;
+	__u32 dummy3;
+};
+
+struct ncp_sign_init
+{
+	char sign_root[8];
+	char sign_last[16];
+};
+
+struct ncp_lock_ioctl
+{
+#define NCP_LOCK_LOG	0
+#define NCP_LOCK_SH	1
+#define NCP_LOCK_EX	2
+#define NCP_LOCK_CLEAR	256
+	int		cmd;
+	int		origin;
+	unsigned int	offset;
+	unsigned int	length;
+#define NCP_LOCK_DEFAULT_TIMEOUT	18
+#define NCP_LOCK_MAX_TIMEOUT		180
+	int		timeout;
+};
+
+struct ncp_setroot_ioctl
+{
+	int		volNumber;
+	int		namespace;
+	__le32		dirEntNum;
+};
+
+struct ncp_objectname_ioctl
+{
+#define NCP_AUTH_NONE	0x00
+#define NCP_AUTH_BIND	0x31
+#define NCP_AUTH_NDS	0x32
+	int		auth_type;
+	size_t		object_name_len;
+	void __user *	object_name;	/* a userspace data, in most cases user name */
+};
+
+struct ncp_privatedata_ioctl
+{
+	size_t		len;
+	void __user *	data;		/* ~1000 for NDS */
+};
+
+/* NLS charsets by ioctl */
+#define NCP_IOCSNAME_LEN 20
+struct ncp_nls_ioctl
+{
+	unsigned char codepage[NCP_IOCSNAME_LEN+1];
+	unsigned char iocharset[NCP_IOCSNAME_LEN+1];
+};
+
+#define	NCP_IOC_NCPREQUEST		_IOR('n', 1, struct ncp_ioctl_request)
+#define	NCP_IOC_GETMOUNTUID		_IOW('n', 2, __kernel_old_uid_t)
+#define NCP_IOC_GETMOUNTUID2		_IOW('n', 2, unsigned long)
+
+#define NCP_IOC_CONN_LOGGED_IN          _IO('n', 3)
+
+#define NCP_GET_FS_INFO_VERSION    (1)
+#define NCP_IOC_GET_FS_INFO             _IOWR('n', 4, struct ncp_fs_info)
+#define NCP_GET_FS_INFO_VERSION_V2 (2)
+#define NCP_IOC_GET_FS_INFO_V2		_IOWR('n', 4, struct ncp_fs_info_v2)
+
+#define NCP_IOC_SIGN_INIT		_IOR('n', 5, struct ncp_sign_init)
+#define NCP_IOC_SIGN_WANTED		_IOR('n', 6, int)
+#define NCP_IOC_SET_SIGN_WANTED		_IOW('n', 6, int)
+
+#define NCP_IOC_LOCKUNLOCK		_IOR('n', 7, struct ncp_lock_ioctl)
+
+#define NCP_IOC_GETROOT			_IOW('n', 8, struct ncp_setroot_ioctl)
+#define NCP_IOC_SETROOT			_IOR('n', 8, struct ncp_setroot_ioctl)
+
+#define NCP_IOC_GETOBJECTNAME		_IOWR('n', 9, struct ncp_objectname_ioctl)
+#define NCP_IOC_SETOBJECTNAME		_IOR('n', 9, struct ncp_objectname_ioctl)
+#define NCP_IOC_GETPRIVATEDATA		_IOWR('n', 10, struct ncp_privatedata_ioctl)
+#define NCP_IOC_SETPRIVATEDATA		_IOR('n', 10, struct ncp_privatedata_ioctl)
+
+#define NCP_IOC_GETCHARSETS		_IOWR('n', 11, struct ncp_nls_ioctl)
+#define NCP_IOC_SETCHARSETS		_IOR('n', 11, struct ncp_nls_ioctl)
+
+#define NCP_IOC_GETDENTRYTTL		_IOW('n', 12, __u32)
+#define NCP_IOC_SETDENTRYTTL		_IOR('n', 12, __u32)
+
+/*
+ * The packet size to allocate. One page should be enough.
+ */
+#define NCP_PACKET_SIZE 4070
+
+#define NCP_MAXPATHLEN 255
+#define NCP_MAXNAMELEN 14
+
+#endif				/* _LINUX_NCP_FS_H */
diff --git a/include/linux/ncp_mount.h b/include/linux/ncp_mount.h
new file mode 100644
index 00000000..dfcbea2d
--- /dev/null
+++ b/include/linux/ncp_mount.h
@@ -0,0 +1,71 @@
+/*
+ *  ncp_mount.h
+ *
+ *  Copyright (C) 1995, 1996 by Volker Lendecke
+ *
+ */
+
+#ifndef _LINUX_NCP_MOUNT_H
+#define _LINUX_NCP_MOUNT_H
+
+#include <linux/types.h>
+#include <linux/ncp.h>
+
+#define NCP_MOUNT_VERSION 3	/* Binary */
+
+/* Values for flags */
+#define NCP_MOUNT_SOFT		0x0001
+#define NCP_MOUNT_INTR		0x0002
+#define NCP_MOUNT_STRONG	0x0004	/* enable delete/rename of r/o files */
+#define NCP_MOUNT_NO_OS2	0x0008	/* do not use OS/2 (LONG) namespace */
+#define NCP_MOUNT_NO_NFS	0x0010	/* do not use NFS namespace */
+#define NCP_MOUNT_EXTRAS	0x0020
+#define NCP_MOUNT_SYMLINKS	0x0040	/* enable symlinks */
+#define NCP_MOUNT_NFS_EXTRAS	0x0080	/* Enable use of NFS NS meta-info */
+
+struct ncp_mount_data {
+	int version;
+	unsigned int ncp_fd;	/* The socket to the ncp port */
+	__kernel_uid_t mounted_uid;	/* Who may umount() this filesystem? */
+	__kernel_pid_t wdog_pid;		/* Who cares for our watchdog packets? */
+
+	unsigned char mounted_vol[NCP_VOLNAME_LEN + 1];
+	unsigned int time_out;	/* How long should I wait after
+				   sending a NCP request? */
+	unsigned int retry_count;	/* And how often should I retry? */
+	unsigned int flags;
+
+	__kernel_uid_t uid;
+	__kernel_gid_t gid;
+	__kernel_mode_t file_mode;
+	__kernel_mode_t dir_mode;
+};
+
+#define NCP_MOUNT_VERSION_V4	(4)	/* Binary or text */
+
+struct ncp_mount_data_v4 {
+	int version;
+	unsigned long flags;	/* NCP_MOUNT_* flags */
+	/* MIPS uses long __kernel_uid_t, but... */
+	/* we neever pass -1, so it is safe */
+	unsigned long mounted_uid;	/* Who may umount() this filesystem? */
+	/* MIPS uses long __kernel_pid_t */
+	long wdog_pid;		/* Who cares for our watchdog packets? */
+
+	unsigned int ncp_fd;	/* The socket to the ncp port */
+	unsigned int time_out;	/* How long should I wait after
+				   sending a NCP request? */
+	unsigned int retry_count;	/* And how often should I retry? */
+
+	/* MIPS uses long __kernel_uid_t... */
+	/* we never pass -1, so it is safe */
+	unsigned long uid;
+	unsigned long gid;
+	/* MIPS uses unsigned long __kernel_mode_t */
+	unsigned long file_mode;
+	unsigned long dir_mode;
+};
+
+#define NCP_MOUNT_VERSION_V5	(5)	/* Text only */
+
+#endif
diff --git a/include/linux/ncp_no.h b/include/linux/ncp_no.h
new file mode 100644
index 00000000..cddaa48f
--- /dev/null
+++ b/include/linux/ncp_no.h
@@ -0,0 +1,19 @@
+#ifndef _NCP_NO
+#define _NCP_NO
+
+/* these define the attribute byte as seen by NCP */
+#define aRONLY			(__cpu_to_le32(1))
+#define aHIDDEN			(__cpu_to_le32(2))
+#define aSYSTEM			(__cpu_to_le32(4))
+#define aEXECUTE		(__cpu_to_le32(8))
+#define aDIR			(__cpu_to_le32(0x10))
+#define aARCH			(__cpu_to_le32(0x20))
+#define aSHARED			(__cpu_to_le32(0x80))
+#define aDONTSUBALLOCATE	(__cpu_to_le32(1L<<11))
+#define aTRANSACTIONAL		(__cpu_to_le32(1L<<12))
+#define aPURGE			(__cpu_to_le32(1L<<16))
+#define aRENAMEINHIBIT		(__cpu_to_le32(1L<<17))
+#define aDELETEINHIBIT		(__cpu_to_le32(1L<<18))
+#define aDONTCOMPRESS		(__cpu_to_le32(1L<<27))
+
+#endif /* _NCP_NO */
diff --git a/include/linux/neighbour.h b/include/linux/neighbour.h
new file mode 100644
index 00000000..b188f68a
--- /dev/null
+++ b/include/linux/neighbour.h
@@ -0,0 +1,156 @@
+#ifndef __LINUX_NEIGHBOUR_H
+#define __LINUX_NEIGHBOUR_H
+
+#include <linux/types.h>
+#include <linux/netlink.h>
+
+struct ndmsg {
+	__u8		ndm_family;
+	__u8		ndm_pad1;
+	__u16		ndm_pad2;
+	__s32		ndm_ifindex;
+	__u16		ndm_state;
+	__u8		ndm_flags;
+	__u8		ndm_type;
+};
+
+enum {
+	NDA_UNSPEC,
+	NDA_DST,
+	NDA_LLADDR,
+	NDA_CACHEINFO,
+	NDA_PROBES,
+	__NDA_MAX
+};
+
+#define NDA_MAX (__NDA_MAX - 1)
+
+/*
+ *	Neighbor Cache Entry Flags
+ */
+
+#define NTF_USE		0x01
+#define NTF_PROXY	0x08	/* == ATF_PUBL */
+#define NTF_ROUTER	0x80
+
+/*
+ *	Neighbor Cache Entry States.
+ */
+
+#define NUD_INCOMPLETE	0x01
+#define NUD_REACHABLE	0x02
+#define NUD_STALE	0x04
+#define NUD_DELAY	0x08
+#define NUD_PROBE	0x10
+#define NUD_FAILED	0x20
+
+/* Dummy states */
+#define NUD_NOARP	0x40
+#define NUD_PERMANENT	0x80
+#define NUD_NONE	0x00
+
+/* NUD_NOARP & NUD_PERMANENT are pseudostates, they never change
+   and make no address resolution or NUD.
+   NUD_PERMANENT is also cannot be deleted by garbage collectors.
+ */
+
+struct nda_cacheinfo {
+	__u32		ndm_confirmed;
+	__u32		ndm_used;
+	__u32		ndm_updated;
+	__u32		ndm_refcnt;
+};
+
+/*****************************************************************
+ *		Neighbour tables specific messages.
+ *
+ * To retrieve the neighbour tables send RTM_GETNEIGHTBL with the
+ * NLM_F_DUMP flag set. Every neighbour table configuration is
+ * spread over multiple messages to avoid running into message
+ * size limits on systems with many interfaces. The first message
+ * in the sequence transports all not device specific data such as
+ * statistics, configuration, and the default parameter set.
+ * This message is followed by 0..n messages carrying device
+ * specific parameter sets.
+ * Although the ordering should be sufficient, NDTA_NAME can be
+ * used to identify sequences. The initial message can be identified
+ * by checking for NDTA_CONFIG. The device specific messages do
+ * not contain this TLV but have NDTPA_IFINDEX set to the
+ * corresponding interface index.
+ *
+ * To change neighbour table attributes, send RTM_SETNEIGHTBL
+ * with NDTA_NAME set. Changeable attribute include NDTA_THRESH[1-3],
+ * NDTA_GC_INTERVAL, and all TLVs in NDTA_PARMS unless marked
+ * otherwise. Device specific parameter sets can be changed by
+ * setting NDTPA_IFINDEX to the interface index of the corresponding
+ * device.
+ ****/
+
+struct ndt_stats {
+	__u64		ndts_allocs;
+	__u64		ndts_destroys;
+	__u64		ndts_hash_grows;
+	__u64		ndts_res_failed;
+	__u64		ndts_lookups;
+	__u64		ndts_hits;
+	__u64		ndts_rcv_probes_mcast;
+	__u64		ndts_rcv_probes_ucast;
+	__u64		ndts_periodic_gc_runs;
+	__u64		ndts_forced_gc_runs;
+};
+
+enum {
+	NDTPA_UNSPEC,
+	NDTPA_IFINDEX,			/* u32, unchangeable */
+	NDTPA_REFCNT,			/* u32, read-only */
+	NDTPA_REACHABLE_TIME,		/* u64, read-only, msecs */
+	NDTPA_BASE_REACHABLE_TIME,	/* u64, msecs */
+	NDTPA_RETRANS_TIME,		/* u64, msecs */
+	NDTPA_GC_STALETIME,		/* u64, msecs */
+	NDTPA_DELAY_PROBE_TIME,		/* u64, msecs */
+	NDTPA_QUEUE_LEN,		/* u32 */
+	NDTPA_APP_PROBES,		/* u32 */
+	NDTPA_UCAST_PROBES,		/* u32 */
+	NDTPA_MCAST_PROBES,		/* u32 */
+	NDTPA_ANYCAST_DELAY,		/* u64, msecs */
+	NDTPA_PROXY_DELAY,		/* u64, msecs */
+	NDTPA_PROXY_QLEN,		/* u32 */
+	NDTPA_LOCKTIME,			/* u64, msecs */
+	NDTPA_QUEUE_LENBYTES,		/* u32 */
+	__NDTPA_MAX
+};
+#define NDTPA_MAX (__NDTPA_MAX - 1)
+
+struct ndtmsg {
+	__u8		ndtm_family;
+	__u8		ndtm_pad1;
+	__u16		ndtm_pad2;
+};
+
+struct ndt_config {
+	__u16		ndtc_key_len;
+	__u16		ndtc_entry_size;
+	__u32		ndtc_entries;
+	__u32		ndtc_last_flush;	/* delta to now in msecs */
+	__u32		ndtc_last_rand;		/* delta to now in msecs */
+	__u32		ndtc_hash_rnd;
+	__u32		ndtc_hash_mask;
+	__u32		ndtc_hash_chain_gc;
+	__u32		ndtc_proxy_qlen;
+};
+
+enum {
+	NDTA_UNSPEC,
+	NDTA_NAME,			/* char *, unchangeable */
+	NDTA_THRESH1,			/* u32 */
+	NDTA_THRESH2,			/* u32 */
+	NDTA_THRESH3,			/* u32 */
+	NDTA_CONFIG,			/* struct ndt_config, read-only */
+	NDTA_PARMS,			/* nested TLV NDTPA_* */
+	NDTA_STATS,			/* struct ndt_stats, read-only */
+	NDTA_GC_INTERVAL,		/* u64, msecs */
+	__NDTA_MAX
+};
+#define NDTA_MAX (__NDTA_MAX - 1)
+
+#endif
diff --git a/include/linux/net.h b/include/linux/net.h
new file mode 100644
index 00000000..be60c7f5
--- /dev/null
+++ b/include/linux/net.h
@@ -0,0 +1,294 @@
+/*
+ * NET		An implementation of the SOCKET network access protocol.
+ *		This is the master header file for the Linux NET layer,
+ *		or, in plain English: the networking handling part of the
+ *		kernel.
+ *
+ * Version:	@(#)net.h	1.0.3	05/25/93
+ *
+ * Authors:	Orest Zborowski, <obz@Kodak.COM>
+ *		Ross Biro
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_NET_H
+#define _LINUX_NET_H
+
+#include <linux/socket.h>
+#include <asm/socket.h>
+
+#define NPROTO		AF_MAX
+
+#define SYS_SOCKET	1		/* sys_socket(2)		*/
+#define SYS_BIND	2		/* sys_bind(2)			*/
+#define SYS_CONNECT	3		/* sys_connect(2)		*/
+#define SYS_LISTEN	4		/* sys_listen(2)		*/
+#define SYS_ACCEPT	5		/* sys_accept(2)		*/
+#define SYS_GETSOCKNAME	6		/* sys_getsockname(2)		*/
+#define SYS_GETPEERNAME	7		/* sys_getpeername(2)		*/
+#define SYS_SOCKETPAIR	8		/* sys_socketpair(2)		*/
+#define SYS_SEND	9		/* sys_send(2)			*/
+#define SYS_RECV	10		/* sys_recv(2)			*/
+#define SYS_SENDTO	11		/* sys_sendto(2)		*/
+#define SYS_RECVFROM	12		/* sys_recvfrom(2)		*/
+#define SYS_SHUTDOWN	13		/* sys_shutdown(2)		*/
+#define SYS_SETSOCKOPT	14		/* sys_setsockopt(2)		*/
+#define SYS_GETSOCKOPT	15		/* sys_getsockopt(2)		*/
+#define SYS_SENDMSG	16		/* sys_sendmsg(2)		*/
+#define SYS_RECVMSG	17		/* sys_recvmsg(2)		*/
+#define SYS_ACCEPT4	18		/* sys_accept4(2)		*/
+#define SYS_RECVMMSG	19		/* sys_recvmmsg(2)		*/
+#define SYS_SENDMMSG	20		/* sys_sendmmsg(2)		*/
+
+typedef enum {
+	SS_FREE = 0,			/* not allocated		*/
+	SS_UNCONNECTED,			/* unconnected to any socket	*/
+	SS_CONNECTING,			/* in process of connecting	*/
+	SS_CONNECTED,			/* connected to socket		*/
+	SS_DISCONNECTING		/* in process of disconnecting	*/
+} socket_state;
+
+#define __SO_ACCEPTCON	(1 << 16)	/* performed a listen		*/
+
+#ifdef __KERNEL__
+#include <linux/stringify.h>
+#include <linux/random.h>
+#include <linux/wait.h>
+#include <linux/fcntl.h>	/* For O_CLOEXEC and O_NONBLOCK */
+#include <linux/kmemcheck.h>
+#include <linux/rcupdate.h>
+
+struct poll_table_struct;
+struct pipe_inode_info;
+struct inode;
+struct net;
+
+#define SOCK_ASYNC_NOSPACE	0
+#define SOCK_ASYNC_WAITDATA	1
+#define SOCK_NOSPACE		2
+#define SOCK_PASSCRED		3
+#define SOCK_PASSSEC		4
+
+#ifndef ARCH_HAS_SOCKET_TYPES
+/**
+ * enum sock_type - Socket types
+ * @SOCK_STREAM: stream (connection) socket
+ * @SOCK_DGRAM: datagram (conn.less) socket
+ * @SOCK_RAW: raw socket
+ * @SOCK_RDM: reliably-delivered message
+ * @SOCK_SEQPACKET: sequential packet socket
+ * @SOCK_DCCP: Datagram Congestion Control Protocol socket
+ * @SOCK_PACKET: linux specific way of getting packets at the dev level.
+ *		  For writing rarp and other similar things on the user level.
+ *
+ * When adding some new socket type please
+ * grep ARCH_HAS_SOCKET_TYPE include/asm-* /socket.h, at least MIPS
+ * overrides this enum for binary compat reasons.
+ */
+enum sock_type {
+	SOCK_STREAM	= 1,
+	SOCK_DGRAM	= 2,
+	SOCK_RAW	= 3,
+	SOCK_RDM	= 4,
+	SOCK_SEQPACKET	= 5,
+	SOCK_DCCP	= 6,
+	SOCK_PACKET	= 10,
+};
+
+#define SOCK_MAX (SOCK_PACKET + 1)
+/* Mask which covers at least up to SOCK_MASK-1.  The
+ * remaining bits are used as flags. */
+#define SOCK_TYPE_MASK 0xf
+
+/* Flags for socket, socketpair, accept4 */
+#define SOCK_CLOEXEC	O_CLOEXEC
+#ifndef SOCK_NONBLOCK
+#define SOCK_NONBLOCK	O_NONBLOCK
+#endif
+
+#endif /* ARCH_HAS_SOCKET_TYPES */
+
+enum sock_shutdown_cmd {
+	SHUT_RD		= 0,
+	SHUT_WR		= 1,
+	SHUT_RDWR	= 2,
+};
+
+struct socket_wq {
+	/* Note: wait MUST be first field of socket_wq */
+	wait_queue_head_t	wait;
+	struct fasync_struct	*fasync_list;
+	struct rcu_head		rcu;
+} ____cacheline_aligned_in_smp;
+
+/**
+ *  struct socket - general BSD socket
+ *  @state: socket state (%SS_CONNECTED, etc)
+ *  @type: socket type (%SOCK_STREAM, etc)
+ *  @flags: socket flags (%SOCK_ASYNC_NOSPACE, etc)
+ *  @ops: protocol specific socket operations
+ *  @file: File back pointer for gc
+ *  @sk: internal networking protocol agnostic socket representation
+ *  @wq: wait queue for several uses
+ */
+struct socket {
+	socket_state		state;
+
+	kmemcheck_bitfield_begin(type);
+	short			type;
+	kmemcheck_bitfield_end(type);
+
+	unsigned long		flags;
+
+	struct socket_wq __rcu	*wq;
+
+	struct file		*file;
+	struct sock		*sk;
+	const struct proto_ops	*ops;
+};
+
+struct vm_area_struct;
+struct page;
+struct kiocb;
+struct sockaddr;
+struct msghdr;
+struct module;
+
+struct proto_ops {
+	int		family;
+	struct module	*owner;
+	int		(*release)   (struct socket *sock);
+	int		(*bind)	     (struct socket *sock,
+				      struct sockaddr *myaddr,
+				      int sockaddr_len);
+	int		(*connect)   (struct socket *sock,
+				      struct sockaddr *vaddr,
+				      int sockaddr_len, int flags);
+	int		(*socketpair)(struct socket *sock1,
+				      struct socket *sock2);
+	int		(*accept)    (struct socket *sock,
+				      struct socket *newsock, int flags);
+	int		(*getname)   (struct socket *sock,
+				      struct sockaddr *addr,
+				      int *sockaddr_len, int peer);
+	unsigned int	(*poll)	     (struct file *file, struct socket *sock,
+				      struct poll_table_struct *wait);
+	int		(*ioctl)     (struct socket *sock, unsigned int cmd,
+				      unsigned long arg);
+#ifdef CONFIG_COMPAT
+	int	 	(*compat_ioctl) (struct socket *sock, unsigned int cmd,
+				      unsigned long arg);
+#endif
+	int		(*listen)    (struct socket *sock, int len);
+	int		(*shutdown)  (struct socket *sock, int flags);
+	int		(*setsockopt)(struct socket *sock, int level,
+				      int optname, char __user *optval, unsigned int optlen);
+	int		(*getsockopt)(struct socket *sock, int level,
+				      int optname, char __user *optval, int __user *optlen);
+#ifdef CONFIG_COMPAT
+	int		(*compat_setsockopt)(struct socket *sock, int level,
+				      int optname, char __user *optval, unsigned int optlen);
+	int		(*compat_getsockopt)(struct socket *sock, int level,
+				      int optname, char __user *optval, int __user *optlen);
+#endif
+	int		(*sendmsg)   (struct kiocb *iocb, struct socket *sock,
+				      struct msghdr *m, size_t total_len);
+	int		(*recvmsg)   (struct kiocb *iocb, struct socket *sock,
+				      struct msghdr *m, size_t total_len,
+				      int flags);
+	int		(*mmap)	     (struct file *file, struct socket *sock,
+				      struct vm_area_struct * vma);
+	ssize_t		(*sendpage)  (struct socket *sock, struct page *page,
+				      int offset, size_t size, int flags);
+	ssize_t 	(*splice_read)(struct socket *sock,  loff_t *ppos,
+				       struct pipe_inode_info *pipe, size_t len, unsigned int flags);
+	void		(*set_peek_off)(struct sock *sk, int val);
+};
+
+#define DECLARE_SOCKADDR(type, dst, src)	\
+	type dst = ({ __sockaddr_check_size(sizeof(*dst)); (type) src; })
+
+struct net_proto_family {
+	int		family;
+	int		(*create)(struct net *net, struct socket *sock,
+				  int protocol, int kern);
+	struct module	*owner;
+};
+
+struct iovec;
+struct kvec;
+
+enum {
+	SOCK_WAKE_IO,
+	SOCK_WAKE_WAITD,
+	SOCK_WAKE_SPACE,
+	SOCK_WAKE_URG,
+};
+
+extern int	     sock_wake_async(struct socket *sk, int how, int band);
+extern int	     sock_register(const struct net_proto_family *fam);
+extern void	     sock_unregister(int family);
+extern int	     __sock_create(struct net *net, int family, int type, int proto,
+				 struct socket **res, int kern);
+extern int	     sock_create(int family, int type, int proto,
+				 struct socket **res);
+extern int	     sock_create_kern(int family, int type, int proto,
+				      struct socket **res);
+extern int	     sock_create_lite(int family, int type, int proto,
+				      struct socket **res); 
+extern void	     sock_release(struct socket *sock);
+extern int   	     sock_sendmsg(struct socket *sock, struct msghdr *msg,
+				  size_t len);
+extern int	     sock_recvmsg(struct socket *sock, struct msghdr *msg,
+				  size_t size, int flags);
+extern int 	     sock_map_fd(struct socket *sock, int flags);
+extern struct socket *sockfd_lookup(int fd, int *err);
+#define		     sockfd_put(sock) fput(sock->file)
+extern int	     net_ratelimit(void);
+
+#define net_random()		random32()
+#define net_srandom(seed)	srandom32((__force u32)seed)
+
+extern int   	     kernel_sendmsg(struct socket *sock, struct msghdr *msg,
+				    struct kvec *vec, size_t num, size_t len);
+extern int   	     kernel_recvmsg(struct socket *sock, struct msghdr *msg,
+				    struct kvec *vec, size_t num,
+				    size_t len, int flags);
+
+extern int kernel_bind(struct socket *sock, struct sockaddr *addr,
+		       int addrlen);
+extern int kernel_listen(struct socket *sock, int backlog);
+extern int kernel_accept(struct socket *sock, struct socket **newsock,
+			 int flags);
+extern int kernel_connect(struct socket *sock, struct sockaddr *addr,
+			  int addrlen, int flags);
+extern int kernel_getsockname(struct socket *sock, struct sockaddr *addr,
+			      int *addrlen);
+extern int kernel_getpeername(struct socket *sock, struct sockaddr *addr,
+			      int *addrlen);
+extern int kernel_getsockopt(struct socket *sock, int level, int optname,
+			     char *optval, int *optlen);
+extern int kernel_setsockopt(struct socket *sock, int level, int optname,
+			     char *optval, unsigned int optlen);
+extern int kernel_sendpage(struct socket *sock, struct page *page, int offset,
+			   size_t size, int flags);
+extern int kernel_sock_ioctl(struct socket *sock, int cmd, unsigned long arg);
+extern int kernel_sock_shutdown(struct socket *sock,
+				enum sock_shutdown_cmd how);
+
+#define MODULE_ALIAS_NETPROTO(proto) \
+	MODULE_ALIAS("net-pf-" __stringify(proto))
+
+#define MODULE_ALIAS_NET_PF_PROTO(pf, proto) \
+	MODULE_ALIAS("net-pf-" __stringify(pf) "-proto-" __stringify(proto))
+
+#define MODULE_ALIAS_NET_PF_PROTO_TYPE(pf, proto, type) \
+	MODULE_ALIAS("net-pf-" __stringify(pf) "-proto-" __stringify(proto) \
+		     "-type-" __stringify(type))
+
+#endif /* __KERNEL__ */
+#endif	/* _LINUX_NET_H */
diff --git a/include/linux/net_dropmon.h b/include/linux/net_dropmon.h
new file mode 100644
index 00000000..2a739462
--- /dev/null
+++ b/include/linux/net_dropmon.h
@@ -0,0 +1,64 @@
+#ifndef __NET_DROPMON_H
+#define __NET_DROPMON_H
+
+#include <linux/types.h>
+#include <linux/netlink.h>
+
+struct net_dm_drop_point {
+	__u8 pc[8];
+	__u32 count;
+};
+
+#define is_drop_point_hw(x) do {\
+	int ____i, ____j;\
+	for (____i = 0; ____i < 8; i ____i++)\
+		____j |= x[____i];\
+	____j;\
+} while (0)
+
+#define NET_DM_CFG_VERSION  0
+#define NET_DM_CFG_ALERT_COUNT  1
+#define NET_DM_CFG_ALERT_DELAY 2
+#define NET_DM_CFG_MAX 3
+
+struct net_dm_config_entry {
+	__u32 type;
+	__u64 data __attribute__((aligned(8)));
+};
+
+struct net_dm_config_msg {
+	__u32 entries;
+	struct net_dm_config_entry options[0];
+};
+
+struct net_dm_alert_msg {
+	__u32 entries;
+	struct net_dm_drop_point points[0];
+};
+
+struct net_dm_user_msg {
+	union {
+		struct net_dm_config_msg user;
+		struct net_dm_alert_msg alert;
+	} u;
+};
+
+
+/* These are the netlink message types for this protocol */
+
+enum {
+	NET_DM_CMD_UNSPEC = 0,
+	NET_DM_CMD_ALERT,
+	NET_DM_CMD_CONFIG,
+	NET_DM_CMD_START,
+	NET_DM_CMD_STOP,
+	_NET_DM_CMD_MAX,
+};
+
+#define NET_DM_CMD_MAX (_NET_DM_CMD_MAX - 1)
+
+/*
+ * Our group identifiers
+ */
+#define NET_DM_GRP_ALERT 1
+#endif
diff --git a/include/linux/net_tstamp.h b/include/linux/net_tstamp.h
new file mode 100644
index 00000000..ae5df122
--- /dev/null
+++ b/include/linux/net_tstamp.h
@@ -0,0 +1,113 @@
+/*
+ * Userspace API for hardware time stamping of network packets
+ *
+ * Copyright (C) 2008,2009 Intel Corporation
+ * Author: Patrick Ohly <patrick.ohly@intel.com>
+ *
+ */
+
+#ifndef _NET_TIMESTAMPING_H
+#define _NET_TIMESTAMPING_H
+
+#include <linux/socket.h>   /* for SO_TIMESTAMPING */
+
+/* SO_TIMESTAMPING gets an integer bit field comprised of these values */
+enum {
+	SOF_TIMESTAMPING_TX_HARDWARE = (1<<0),
+	SOF_TIMESTAMPING_TX_SOFTWARE = (1<<1),
+	SOF_TIMESTAMPING_RX_HARDWARE = (1<<2),
+	SOF_TIMESTAMPING_RX_SOFTWARE = (1<<3),
+	SOF_TIMESTAMPING_SOFTWARE = (1<<4),
+	SOF_TIMESTAMPING_SYS_HARDWARE = (1<<5),
+	SOF_TIMESTAMPING_RAW_HARDWARE = (1<<6),
+	SOF_TIMESTAMPING_MASK =
+	(SOF_TIMESTAMPING_RAW_HARDWARE - 1) |
+	SOF_TIMESTAMPING_RAW_HARDWARE
+};
+
+/**
+ * struct hwtstamp_config - %SIOCSHWTSTAMP parameter
+ *
+ * @flags:	no flags defined right now, must be zero
+ * @tx_type:	one of HWTSTAMP_TX_*
+ * @rx_type:	one of one of HWTSTAMP_FILTER_*
+ *
+ * %SIOCSHWTSTAMP expects a &struct ifreq with a ifr_data pointer to
+ * this structure. dev_ifsioc() in the kernel takes care of the
+ * translation between 32 bit userspace and 64 bit kernel. The
+ * structure is intentionally chosen so that it has the same layout on
+ * 32 and 64 bit systems, don't break this!
+ */
+struct hwtstamp_config {
+	int flags;
+	int tx_type;
+	int rx_filter;
+};
+
+/* possible values for hwtstamp_config->tx_type */
+enum hwtstamp_tx_types {
+	/*
+	 * No outgoing packet will need hardware time stamping;
+	 * should a packet arrive which asks for it, no hardware
+	 * time stamping will be done.
+	 */
+	HWTSTAMP_TX_OFF,
+
+	/*
+	 * Enables hardware time stamping for outgoing packets;
+	 * the sender of the packet decides which are to be
+	 * time stamped by setting %SOF_TIMESTAMPING_TX_SOFTWARE
+	 * before sending the packet.
+	 */
+	HWTSTAMP_TX_ON,
+
+	/*
+	 * Enables time stamping for outgoing packets just as
+	 * HWTSTAMP_TX_ON does, but also enables time stamp insertion
+	 * directly into Sync packets. In this case, transmitted Sync
+	 * packets will not received a time stamp via the socket error
+	 * queue.
+	 */
+	HWTSTAMP_TX_ONESTEP_SYNC,
+};
+
+/* possible values for hwtstamp_config->rx_filter */
+enum hwtstamp_rx_filters {
+	/* time stamp no incoming packet at all */
+	HWTSTAMP_FILTER_NONE,
+
+	/* time stamp any incoming packet */
+	HWTSTAMP_FILTER_ALL,
+
+	/* return value: time stamp all packets requested plus some others */
+	HWTSTAMP_FILTER_SOME,
+
+	/* PTP v1, UDP, any kind of event packet */
+	HWTSTAMP_FILTER_PTP_V1_L4_EVENT,
+	/* PTP v1, UDP, Sync packet */
+	HWTSTAMP_FILTER_PTP_V1_L4_SYNC,
+	/* PTP v1, UDP, Delay_req packet */
+	HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ,
+	/* PTP v2, UDP, any kind of event packet */
+	HWTSTAMP_FILTER_PTP_V2_L4_EVENT,
+	/* PTP v2, UDP, Sync packet */
+	HWTSTAMP_FILTER_PTP_V2_L4_SYNC,
+	/* PTP v2, UDP, Delay_req packet */
+	HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ,
+
+	/* 802.AS1, Ethernet, any kind of event packet */
+	HWTSTAMP_FILTER_PTP_V2_L2_EVENT,
+	/* 802.AS1, Ethernet, Sync packet */
+	HWTSTAMP_FILTER_PTP_V2_L2_SYNC,
+	/* 802.AS1, Ethernet, Delay_req packet */
+	HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ,
+
+	/* PTP v2/802.AS1, any layer, any kind of event packet */
+	HWTSTAMP_FILTER_PTP_V2_EVENT,
+	/* PTP v2/802.AS1, any layer, Sync packet */
+	HWTSTAMP_FILTER_PTP_V2_SYNC,
+	/* PTP v2/802.AS1, any layer, Delay_req packet */
+	HWTSTAMP_FILTER_PTP_V2_DELAY_REQ,
+};
+
+#endif /* _NET_TIMESTAMPING_H */
diff --git a/include/linux/netdev_features.h b/include/linux/netdev_features.h
new file mode 100644
index 00000000..5ac32123
--- /dev/null
+++ b/include/linux/netdev_features.h
@@ -0,0 +1,150 @@
+/*
+ * Network device features.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_NETDEV_FEATURES_H
+#define _LINUX_NETDEV_FEATURES_H
+
+#include <linux/types.h>
+
+typedef u64 netdev_features_t;
+
+enum {
+	NETIF_F_SG_BIT,			/* Scatter/gather IO. */
+	NETIF_F_IP_CSUM_BIT,		/* Can checksum TCP/UDP over IPv4. */
+	__UNUSED_NETIF_F_1,
+	NETIF_F_HW_CSUM_BIT,		/* Can checksum all the packets. */
+	NETIF_F_IPV6_CSUM_BIT,		/* Can checksum TCP/UDP over IPV6 */
+	NETIF_F_HIGHDMA_BIT,		/* Can DMA to high memory. */
+	NETIF_F_FRAGLIST_BIT,		/* Scatter/gather IO. */
+	NETIF_F_HW_VLAN_TX_BIT,		/* Transmit VLAN hw acceleration */
+	NETIF_F_HW_VLAN_RX_BIT,		/* Receive VLAN hw acceleration */
+	NETIF_F_HW_VLAN_FILTER_BIT,	/* Receive filtering on VLAN */
+	NETIF_F_VLAN_CHALLENGED_BIT,	/* Device cannot handle VLAN packets */
+	NETIF_F_GSO_BIT,		/* Enable software GSO. */
+	NETIF_F_LLTX_BIT,		/* LockLess TX - deprecated. Please */
+					/* do not use LLTX in new drivers */
+	NETIF_F_NETNS_LOCAL_BIT,	/* Does not change network namespaces */
+	NETIF_F_GRO_BIT,		/* Generic receive offload */
+	NETIF_F_LRO_BIT,		/* large receive offload */
+
+	/**/NETIF_F_GSO_SHIFT,		/* keep the order of SKB_GSO_* bits */
+	NETIF_F_TSO_BIT			/* ... TCPv4 segmentation */
+		= NETIF_F_GSO_SHIFT,
+	NETIF_F_UFO_BIT,		/* ... UDPv4 fragmentation */
+	NETIF_F_GSO_ROBUST_BIT,		/* ... ->SKB_GSO_DODGY */
+	NETIF_F_TSO_ECN_BIT,		/* ... TCP ECN support */
+	NETIF_F_TSO6_BIT,		/* ... TCPv6 segmentation */
+	NETIF_F_FSO_BIT,		/* ... FCoE segmentation */
+	NETIF_F_GSO_RESERVED1,		/* ... free (fill GSO_MASK to 8 bits) */
+	/**/NETIF_F_GSO_LAST,		/* [can't be last bit, see GSO_MASK] */
+	NETIF_F_GSO_RESERVED2		/* ... free (fill GSO_MASK to 8 bits) */
+		= NETIF_F_GSO_LAST,
+
+	NETIF_F_FCOE_CRC_BIT,		/* FCoE CRC32 */
+	NETIF_F_SCTP_CSUM_BIT,		/* SCTP checksum offload */
+	NETIF_F_FCOE_MTU_BIT,		/* Supports max FCoE MTU, 2158 bytes*/
+	NETIF_F_NTUPLE_BIT,		/* N-tuple filters supported */
+	NETIF_F_RXHASH_BIT,		/* Receive hashing offload */
+	NETIF_F_RXCSUM_BIT,		/* Receive checksumming offload */
+	NETIF_F_NOCACHE_COPY_BIT,	/* Use no-cache copyfromuser */
+	NETIF_F_LOOPBACK_BIT,		/* Enable loopback */
+	NETIF_F_RXFCS_BIT,		/* Append FCS to skb pkt data */
+	NETIF_F_RXALL_BIT,		/* Receive errored frames too */
+
+	/*
+	 * Add your fresh new feature above and remember to update
+	 * netdev_features_strings[] in net/core/ethtool.c and maybe
+	 * some feature mask #defines below. Please also describe it
+	 * in Documentation/networking/netdev-features.txt.
+	 */
+
+	/**/NETDEV_FEATURE_COUNT
+};
+
+/* copy'n'paste compression ;) */
+#define __NETIF_F_BIT(bit)	((netdev_features_t)1 << (bit))
+#define __NETIF_F(name)		__NETIF_F_BIT(NETIF_F_##name##_BIT)
+
+#define NETIF_F_FCOE_CRC	__NETIF_F(FCOE_CRC)
+#define NETIF_F_FCOE_MTU	__NETIF_F(FCOE_MTU)
+#define NETIF_F_FRAGLIST	__NETIF_F(FRAGLIST)
+#define NETIF_F_FSO		__NETIF_F(FSO)
+#define NETIF_F_GRO		__NETIF_F(GRO)
+#define NETIF_F_GSO		__NETIF_F(GSO)
+#define NETIF_F_GSO_ROBUST	__NETIF_F(GSO_ROBUST)
+#define NETIF_F_HIGHDMA		__NETIF_F(HIGHDMA)
+#define NETIF_F_HW_CSUM		__NETIF_F(HW_CSUM)
+#define NETIF_F_HW_VLAN_FILTER	__NETIF_F(HW_VLAN_FILTER)
+#define NETIF_F_HW_VLAN_RX	__NETIF_F(HW_VLAN_RX)
+#define NETIF_F_HW_VLAN_TX	__NETIF_F(HW_VLAN_TX)
+#define NETIF_F_IP_CSUM		__NETIF_F(IP_CSUM)
+#define NETIF_F_IPV6_CSUM	__NETIF_F(IPV6_CSUM)
+#define NETIF_F_LLTX		__NETIF_F(LLTX)
+#define NETIF_F_LOOPBACK	__NETIF_F(LOOPBACK)
+#define NETIF_F_LRO		__NETIF_F(LRO)
+#define NETIF_F_NETNS_LOCAL	__NETIF_F(NETNS_LOCAL)
+#define NETIF_F_NOCACHE_COPY	__NETIF_F(NOCACHE_COPY)
+#define NETIF_F_NTUPLE		__NETIF_F(NTUPLE)
+#define NETIF_F_RXCSUM		__NETIF_F(RXCSUM)
+#define NETIF_F_RXHASH		__NETIF_F(RXHASH)
+#define NETIF_F_SCTP_CSUM	__NETIF_F(SCTP_CSUM)
+#define NETIF_F_SG		__NETIF_F(SG)
+#define NETIF_F_TSO6		__NETIF_F(TSO6)
+#define NETIF_F_TSO_ECN		__NETIF_F(TSO_ECN)
+#define NETIF_F_TSO		__NETIF_F(TSO)
+#define NETIF_F_UFO		__NETIF_F(UFO)
+#define NETIF_F_VLAN_CHALLENGED	__NETIF_F(VLAN_CHALLENGED)
+#define NETIF_F_RXFCS		__NETIF_F(RXFCS)
+#define NETIF_F_RXALL		__NETIF_F(RXALL)
+
+/* Features valid for ethtool to change */
+/* = all defined minus driver/device-class-related */
+#define NETIF_F_NEVER_CHANGE	(NETIF_F_VLAN_CHALLENGED | \
+				 NETIF_F_LLTX | NETIF_F_NETNS_LOCAL)
+
+/* remember that ((t)1 << t_BITS) is undefined in C99 */
+#define NETIF_F_ETHTOOL_BITS	((__NETIF_F_BIT(NETDEV_FEATURE_COUNT - 1) | \
+		(__NETIF_F_BIT(NETDEV_FEATURE_COUNT - 1) - 1)) & \
+		~NETIF_F_NEVER_CHANGE)
+
+/* Segmentation offload feature mask */
+#define NETIF_F_GSO_MASK	(__NETIF_F_BIT(NETIF_F_GSO_LAST + 1) - \
+		__NETIF_F_BIT(NETIF_F_GSO_SHIFT))
+
+/* List of features with software fallbacks. */
+#define NETIF_F_GSO_SOFTWARE	(NETIF_F_TSO | NETIF_F_TSO_ECN | \
+				 NETIF_F_TSO6 | NETIF_F_UFO)
+
+#define NETIF_F_GEN_CSUM	NETIF_F_HW_CSUM
+#define NETIF_F_V4_CSUM		(NETIF_F_GEN_CSUM | NETIF_F_IP_CSUM)
+#define NETIF_F_V6_CSUM		(NETIF_F_GEN_CSUM | NETIF_F_IPV6_CSUM)
+#define NETIF_F_ALL_CSUM	(NETIF_F_V4_CSUM | NETIF_F_V6_CSUM)
+
+#define NETIF_F_ALL_TSO 	(NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN)
+
+#define NETIF_F_ALL_FCOE	(NETIF_F_FCOE_CRC | NETIF_F_FCOE_MTU | \
+				 NETIF_F_FSO)
+
+/*
+ * If one device supports one of these features, then enable them
+ * for all in netdev_increment_features.
+ */
+#define NETIF_F_ONE_FOR_ALL	(NETIF_F_GSO_SOFTWARE | NETIF_F_GSO_ROBUST | \
+				 NETIF_F_SG | NETIF_F_HIGHDMA |		\
+				 NETIF_F_FRAGLIST | NETIF_F_VLAN_CHALLENGED)
+/*
+ * If one device doesn't support one of these features, then disable it
+ * for all in netdev_increment_features.
+ */
+#define NETIF_F_ALL_FOR_ALL	(NETIF_F_NOCACHE_COPY | NETIF_F_FSO)
+
+/* changeable features with no special hardware requirements */
+#define NETIF_F_SOFT_FEATURES	(NETIF_F_GSO | NETIF_F_GRO)
+
+#endif	/* _LINUX_NETDEV_FEATURES_H */
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
new file mode 100644
index 00000000..33900a53
--- /dev/null
+++ b/include/linux/netdevice.h
@@ -0,0 +1,2804 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the Interfaces handler.
+ *
+ * Version:	@(#)dev.h	1.0.10	08/12/93
+ *
+ * Authors:	Ross Biro
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Corey Minyard <wf-rch!minyard@relay.EU.net>
+ *		Donald J. Becker, <becker@cesdis.gsfc.nasa.gov>
+ *		Alan Cox, <alan@lxorguk.ukuu.org.uk>
+ *		Bjorn Ekwall. <bj0rn@blox.se>
+ *              Pekka Riikonen <priikone@poseidon.pspt.fi>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ *		Moved to /usr/include/linux for NET3
+ */
+#ifndef _LINUX_NETDEVICE_H
+#define _LINUX_NETDEVICE_H
+
+#include <linux/if.h>
+#include <linux/if_ether.h>
+#include <linux/if_packet.h>
+#include <linux/if_link.h>
+
+#ifdef __KERNEL__
+#include <linux/pm_qos.h>
+#include <linux/timer.h>
+#include <linux/bug.h>
+#include <linux/delay.h>
+#include <linux/atomic.h>
+#include <asm/cache.h>
+#include <asm/byteorder.h>
+
+#include <linux/percpu.h>
+#include <linux/rculist.h>
+#include <linux/dmaengine.h>
+#include <linux/workqueue.h>
+#include <linux/dynamic_queue_limits.h>
+
+#include <linux/ethtool.h>
+#include <net/net_namespace.h>
+#include <net/dsa.h>
+#ifdef CONFIG_DCB
+#include <net/dcbnl.h>
+#endif
+#include <net/netprio_cgroup.h>
+
+#include <linux/netdev_features.h>
+
+struct netpoll_info;
+struct device;
+struct phy_device;
+/* 802.11 specific */
+struct wireless_dev;
+					/* source back-compat hooks */
+#define SET_ETHTOOL_OPS(netdev,ops) \
+	( (netdev)->ethtool_ops = (ops) )
+
+/* hardware address assignment types */
+#define NET_ADDR_PERM		0	/* address is permanent (default) */
+#define NET_ADDR_RANDOM		1	/* address is generated randomly */
+#define NET_ADDR_STOLEN		2	/* address is stolen from other device */
+
+/* Backlog congestion levels */
+#define NET_RX_SUCCESS		0	/* keep 'em coming, baby */
+#define NET_RX_DROP		1	/* packet dropped */
+
+/*
+ * Transmit return codes: transmit return codes originate from three different
+ * namespaces:
+ *
+ * - qdisc return codes
+ * - driver transmit return codes
+ * - errno values
+ *
+ * Drivers are allowed to return any one of those in their hard_start_xmit()
+ * function. Real network devices commonly used with qdiscs should only return
+ * the driver transmit return codes though - when qdiscs are used, the actual
+ * transmission happens asynchronously, so the value is not propagated to
+ * higher layers. Virtual network devices transmit synchronously, in this case
+ * the driver transmit return codes are consumed by dev_queue_xmit(), all
+ * others are propagated to higher layers.
+ */
+
+/* qdisc ->enqueue() return codes. */
+#define NET_XMIT_SUCCESS	0x00
+#define NET_XMIT_DROP		0x01	/* skb dropped			*/
+#define NET_XMIT_CN		0x02	/* congestion notification	*/
+#define NET_XMIT_POLICED	0x03	/* skb is shot by police	*/
+#define NET_XMIT_MASK		0x0f	/* qdisc flags in net/sch_generic.h */
+
+/* NET_XMIT_CN is special. It does not guarantee that this packet is lost. It
+ * indicates that the device will soon be dropping packets, or already drops
+ * some packets of the same priority; prompting us to send less aggressively. */
+#define net_xmit_eval(e)	((e) == NET_XMIT_CN ? 0 : (e))
+#define net_xmit_errno(e)	((e) != NET_XMIT_CN ? -ENOBUFS : 0)
+
+/* Driver transmit return codes */
+#define NETDEV_TX_MASK		0xf0
+
+enum netdev_tx {
+	__NETDEV_TX_MIN	 = INT_MIN,	/* make sure enum is signed */
+	NETDEV_TX_OK	 = 0x00,	/* driver took care of packet */
+	NETDEV_TX_BUSY	 = 0x10,	/* driver tx path was busy*/
+	NETDEV_TX_LOCKED = 0x20,	/* driver tx lock was already taken */
+};
+typedef enum netdev_tx netdev_tx_t;
+
+/*
+ * Current order: NETDEV_TX_MASK > NET_XMIT_MASK >= 0 is significant;
+ * hard_start_xmit() return < NET_XMIT_MASK means skb was consumed.
+ */
+static inline bool dev_xmit_complete(int rc)
+{
+	/*
+	 * Positive cases with an skb consumed by a driver:
+	 * - successful transmission (rc == NETDEV_TX_OK)
+	 * - error while transmitting (rc < 0)
+	 * - error while queueing to a different device (rc & NET_XMIT_MASK)
+	 */
+	if (likely(rc < NET_XMIT_MASK))
+		return true;
+
+	return false;
+}
+
+#endif
+
+#define MAX_ADDR_LEN	32		/* Largest hardware address length */
+
+/* Initial net device group. All devices belong to group 0 by default. */
+#define INIT_NETDEV_GROUP	0
+
+#ifdef  __KERNEL__
+/*
+ *	Compute the worst case header length according to the protocols
+ *	used.
+ */
+
+#if defined(CONFIG_WLAN) || IS_ENABLED(CONFIG_AX25)
+# if defined(CONFIG_MAC80211_MESH)
+#  define LL_MAX_HEADER 128
+# else
+#  define LL_MAX_HEADER 96
+# endif
+#elif IS_ENABLED(CONFIG_TR)
+# define LL_MAX_HEADER 48
+#else
+# define LL_MAX_HEADER 32
+#endif
+
+#if !IS_ENABLED(CONFIG_NET_IPIP) && !IS_ENABLED(CONFIG_NET_IPGRE) && \
+    !IS_ENABLED(CONFIG_IPV6_SIT) && !IS_ENABLED(CONFIG_IPV6_TUNNEL)
+#define MAX_HEADER LL_MAX_HEADER
+#else
+#define MAX_HEADER (LL_MAX_HEADER + 48)
+#endif
+
+/*
+ *	Old network device statistics. Fields are native words
+ *	(unsigned long) so they can be read and written atomically.
+ */
+
+struct net_device_stats {
+	unsigned long	rx_packets;
+	unsigned long	tx_packets;
+	unsigned long	rx_bytes;
+	unsigned long	tx_bytes;
+	unsigned long	rx_errors;
+	unsigned long	tx_errors;
+	unsigned long	rx_dropped;
+	unsigned long	tx_dropped;
+	unsigned long	multicast;
+	unsigned long	collisions;
+	unsigned long	rx_length_errors;
+	unsigned long	rx_over_errors;
+	unsigned long	rx_crc_errors;
+	unsigned long	rx_frame_errors;
+	unsigned long	rx_fifo_errors;
+	unsigned long	rx_missed_errors;
+	unsigned long	tx_aborted_errors;
+	unsigned long	tx_carrier_errors;
+	unsigned long	tx_fifo_errors;
+	unsigned long	tx_heartbeat_errors;
+	unsigned long	tx_window_errors;
+	unsigned long	rx_compressed;
+	unsigned long	tx_compressed;
+};
+
+#endif  /*  __KERNEL__  */
+
+
+/* Media selection options. */
+enum {
+        IF_PORT_UNKNOWN = 0,
+        IF_PORT_10BASE2,
+        IF_PORT_10BASET,
+        IF_PORT_AUI,
+        IF_PORT_100BASET,
+        IF_PORT_100BASETX,
+        IF_PORT_100BASEFX
+};
+
+#ifdef __KERNEL__
+
+#include <linux/cache.h>
+#include <linux/skbuff.h>
+
+#ifdef CONFIG_RPS
+#include <linux/static_key.h>
+extern struct static_key rps_needed;
+#endif
+
+struct neighbour;
+struct neigh_parms;
+struct sk_buff;
+
+struct netdev_hw_addr {
+	struct list_head	list;
+	unsigned char		addr[MAX_ADDR_LEN];
+	unsigned char		type;
+#define NETDEV_HW_ADDR_T_LAN		1
+#define NETDEV_HW_ADDR_T_SAN		2
+#define NETDEV_HW_ADDR_T_SLAVE		3
+#define NETDEV_HW_ADDR_T_UNICAST	4
+#define NETDEV_HW_ADDR_T_MULTICAST	5
+	bool			synced;
+	bool			global_use;
+	int			refcount;
+	struct rcu_head		rcu_head;
+};
+
+struct netdev_hw_addr_list {
+	struct list_head	list;
+	int			count;
+};
+
+#define netdev_hw_addr_list_count(l) ((l)->count)
+#define netdev_hw_addr_list_empty(l) (netdev_hw_addr_list_count(l) == 0)
+#define netdev_hw_addr_list_for_each(ha, l) \
+	list_for_each_entry(ha, &(l)->list, list)
+
+#define netdev_uc_count(dev) netdev_hw_addr_list_count(&(dev)->uc)
+#define netdev_uc_empty(dev) netdev_hw_addr_list_empty(&(dev)->uc)
+#define netdev_for_each_uc_addr(ha, dev) \
+	netdev_hw_addr_list_for_each(ha, &(dev)->uc)
+
+#define netdev_mc_count(dev) netdev_hw_addr_list_count(&(dev)->mc)
+#define netdev_mc_empty(dev) netdev_hw_addr_list_empty(&(dev)->mc)
+#define netdev_for_each_mc_addr(ha, dev) \
+	netdev_hw_addr_list_for_each(ha, &(dev)->mc)
+
+struct hh_cache {
+	u16		hh_len;
+	u16		__pad;
+	seqlock_t	hh_lock;
+
+	/* cached hardware header; allow for machine alignment needs.        */
+#define HH_DATA_MOD	16
+#define HH_DATA_OFF(__len) \
+	(HH_DATA_MOD - (((__len - 1) & (HH_DATA_MOD - 1)) + 1))
+#define HH_DATA_ALIGN(__len) \
+	(((__len)+(HH_DATA_MOD-1))&~(HH_DATA_MOD - 1))
+	unsigned long	hh_data[HH_DATA_ALIGN(LL_MAX_HEADER) / sizeof(long)];
+};
+
+/* Reserve HH_DATA_MOD byte aligned hard_header_len, but at least that much.
+ * Alternative is:
+ *   dev->hard_header_len ? (dev->hard_header_len +
+ *                           (HH_DATA_MOD - 1)) & ~(HH_DATA_MOD - 1) : 0
+ *
+ * We could use other alignment values, but we must maintain the
+ * relationship HH alignment <= LL alignment.
+ */
+#define LL_RESERVED_SPACE(dev) \
+	((((dev)->hard_header_len+(dev)->needed_headroom)&~(HH_DATA_MOD - 1)) + HH_DATA_MOD)
+#define LL_RESERVED_SPACE_EXTRA(dev,extra) \
+	((((dev)->hard_header_len+(dev)->needed_headroom+(extra))&~(HH_DATA_MOD - 1)) + HH_DATA_MOD)
+
+struct header_ops {
+	int	(*create) (struct sk_buff *skb, struct net_device *dev,
+			   unsigned short type, const void *daddr,
+			   const void *saddr, unsigned len);
+	int	(*parse)(const struct sk_buff *skb, unsigned char *haddr);
+	int	(*rebuild)(struct sk_buff *skb);
+	int	(*cache)(const struct neighbour *neigh, struct hh_cache *hh, __be16 type);
+	void	(*cache_update)(struct hh_cache *hh,
+				const struct net_device *dev,
+				const unsigned char *haddr);
+};
+
+/* These flag bits are private to the generic network queueing
+ * layer, they may not be explicitly referenced by any other
+ * code.
+ */
+
+enum netdev_state_t {
+	__LINK_STATE_START,
+	__LINK_STATE_PRESENT,
+	__LINK_STATE_NOCARRIER,
+	__LINK_STATE_LINKWATCH_PENDING,
+	__LINK_STATE_DORMANT,
+};
+
+
+/*
+ * This structure holds at boot time configured netdevice settings. They
+ * are then used in the device probing.
+ */
+struct netdev_boot_setup {
+	char name[IFNAMSIZ];
+	struct ifmap map;
+};
+#define NETDEV_BOOT_SETUP_MAX 8
+
+extern int __init netdev_boot_setup(char *str);
+
+/*
+ * Structure for NAPI scheduling similar to tasklet but with weighting
+ */
+struct napi_struct {
+	/* The poll_list must only be managed by the entity which
+	 * changes the state of the NAPI_STATE_SCHED bit.  This means
+	 * whoever atomically sets that bit can add this napi_struct
+	 * to the per-cpu poll_list, and whoever clears that bit
+	 * can remove from the list right before clearing the bit.
+	 */
+	struct list_head	poll_list;
+
+	unsigned long		state;
+	int			weight;
+	int			(*poll)(struct napi_struct *, int);
+#ifdef CONFIG_NETPOLL
+	spinlock_t		poll_lock;
+	int			poll_owner;
+#endif
+
+	unsigned int		gro_count;
+
+	struct net_device	*dev;
+	struct list_head	dev_list;
+	struct sk_buff		*gro_list;
+	struct sk_buff		*skb;
+};
+
+enum {
+	NAPI_STATE_SCHED,	/* Poll is scheduled */
+	NAPI_STATE_DISABLE,	/* Disable pending */
+	NAPI_STATE_NPSVC,	/* Netpoll - don't dequeue from poll_list */
+};
+
+enum gro_result {
+	GRO_MERGED,
+	GRO_MERGED_FREE,
+	GRO_HELD,
+	GRO_NORMAL,
+	GRO_DROP,
+};
+typedef enum gro_result gro_result_t;
+
+/*
+ * enum rx_handler_result - Possible return values for rx_handlers.
+ * @RX_HANDLER_CONSUMED: skb was consumed by rx_handler, do not process it
+ * further.
+ * @RX_HANDLER_ANOTHER: Do another round in receive path. This is indicated in
+ * case skb->dev was changed by rx_handler.
+ * @RX_HANDLER_EXACT: Force exact delivery, no wildcard.
+ * @RX_HANDLER_PASS: Do nothing, passe the skb as if no rx_handler was called.
+ *
+ * rx_handlers are functions called from inside __netif_receive_skb(), to do
+ * special processing of the skb, prior to delivery to protocol handlers.
+ *
+ * Currently, a net_device can only have a single rx_handler registered. Trying
+ * to register a second rx_handler will return -EBUSY.
+ *
+ * To register a rx_handler on a net_device, use netdev_rx_handler_register().
+ * To unregister a rx_handler on a net_device, use
+ * netdev_rx_handler_unregister().
+ *
+ * Upon return, rx_handler is expected to tell __netif_receive_skb() what to
+ * do with the skb.
+ *
+ * If the rx_handler consumed to skb in some way, it should return
+ * RX_HANDLER_CONSUMED. This is appropriate when the rx_handler arranged for
+ * the skb to be delivered in some other ways.
+ *
+ * If the rx_handler changed skb->dev, to divert the skb to another
+ * net_device, it should return RX_HANDLER_ANOTHER. The rx_handler for the
+ * new device will be called if it exists.
+ *
+ * If the rx_handler consider the skb should be ignored, it should return
+ * RX_HANDLER_EXACT. The skb will only be delivered to protocol handlers that
+ * are registred on exact device (ptype->dev == skb->dev).
+ *
+ * If the rx_handler didn't changed skb->dev, but want the skb to be normally
+ * delivered, it should return RX_HANDLER_PASS.
+ *
+ * A device without a registered rx_handler will behave as if rx_handler
+ * returned RX_HANDLER_PASS.
+ */
+
+enum rx_handler_result {
+	RX_HANDLER_CONSUMED,
+	RX_HANDLER_ANOTHER,
+	RX_HANDLER_EXACT,
+	RX_HANDLER_PASS,
+};
+typedef enum rx_handler_result rx_handler_result_t;
+typedef rx_handler_result_t rx_handler_func_t(struct sk_buff **pskb);
+
+extern void __napi_schedule(struct napi_struct *n);
+
+static inline bool napi_disable_pending(struct napi_struct *n)
+{
+	return test_bit(NAPI_STATE_DISABLE, &n->state);
+}
+
+/**
+ *	napi_schedule_prep - check if napi can be scheduled
+ *	@n: napi context
+ *
+ * Test if NAPI routine is already running, and if not mark
+ * it as running.  This is used as a condition variable
+ * insure only one NAPI poll instance runs.  We also make
+ * sure there is no pending NAPI disable.
+ */
+static inline bool napi_schedule_prep(struct napi_struct *n)
+{
+	return !napi_disable_pending(n) &&
+		!test_and_set_bit(NAPI_STATE_SCHED, &n->state);
+}
+
+/**
+ *	napi_schedule - schedule NAPI poll
+ *	@n: napi context
+ *
+ * Schedule NAPI poll routine to be called if it is not already
+ * running.
+ */
+static inline void napi_schedule(struct napi_struct *n)
+{
+	if (napi_schedule_prep(n))
+		__napi_schedule(n);
+}
+
+/* Try to reschedule poll. Called by dev->poll() after napi_complete().  */
+static inline bool napi_reschedule(struct napi_struct *napi)
+{
+	if (napi_schedule_prep(napi)) {
+		__napi_schedule(napi);
+		return true;
+	}
+	return false;
+}
+
+/**
+ *	napi_complete - NAPI processing complete
+ *	@n: napi context
+ *
+ * Mark NAPI processing as complete.
+ */
+extern void __napi_complete(struct napi_struct *n);
+extern void napi_complete(struct napi_struct *n);
+
+/**
+ *	napi_disable - prevent NAPI from scheduling
+ *	@n: napi context
+ *
+ * Stop NAPI from being scheduled on this context.
+ * Waits till any outstanding processing completes.
+ */
+static inline void napi_disable(struct napi_struct *n)
+{
+	set_bit(NAPI_STATE_DISABLE, &n->state);
+	while (test_and_set_bit(NAPI_STATE_SCHED, &n->state))
+		msleep(1);
+	clear_bit(NAPI_STATE_DISABLE, &n->state);
+}
+
+/**
+ *	napi_enable - enable NAPI scheduling
+ *	@n: napi context
+ *
+ * Resume NAPI from being scheduled on this context.
+ * Must be paired with napi_disable.
+ */
+static inline void napi_enable(struct napi_struct *n)
+{
+	BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state));
+	smp_mb__before_clear_bit();
+	clear_bit(NAPI_STATE_SCHED, &n->state);
+}
+
+#ifdef CONFIG_SMP
+/**
+ *	napi_synchronize - wait until NAPI is not running
+ *	@n: napi context
+ *
+ * Wait until NAPI is done being scheduled on this context.
+ * Waits till any outstanding processing completes but
+ * does not disable future activations.
+ */
+static inline void napi_synchronize(const struct napi_struct *n)
+{
+	while (test_bit(NAPI_STATE_SCHED, &n->state))
+		msleep(1);
+}
+#else
+# define napi_synchronize(n)	barrier()
+#endif
+
+enum netdev_queue_state_t {
+	__QUEUE_STATE_DRV_XOFF,
+	__QUEUE_STATE_STACK_XOFF,
+	__QUEUE_STATE_FROZEN,
+#define QUEUE_STATE_ANY_XOFF ((1 << __QUEUE_STATE_DRV_XOFF)		| \
+			      (1 << __QUEUE_STATE_STACK_XOFF))
+#define QUEUE_STATE_ANY_XOFF_OR_FROZEN (QUEUE_STATE_ANY_XOFF		| \
+					(1 << __QUEUE_STATE_FROZEN))
+};
+/*
+ * __QUEUE_STATE_DRV_XOFF is used by drivers to stop the transmit queue.  The
+ * netif_tx_* functions below are used to manipulate this flag.  The
+ * __QUEUE_STATE_STACK_XOFF flag is used by the stack to stop the transmit
+ * queue independently.  The netif_xmit_*stopped functions below are called
+ * to check if the queue has been stopped by the driver or stack (either
+ * of the XOFF bits are set in the state).  Drivers should not need to call
+ * netif_xmit*stopped functions, they should only be using netif_tx_*.
+ */
+
+struct netdev_queue {
+/*
+ * read mostly part
+ */
+	struct net_device	*dev;
+	struct Qdisc		*qdisc;
+	struct Qdisc		*qdisc_sleeping;
+#ifdef CONFIG_SYSFS
+	struct kobject		kobj;
+#endif
+#if defined(CONFIG_XPS) && defined(CONFIG_NUMA)
+	int			numa_node;
+#endif
+/*
+ * write mostly part
+ */
+	spinlock_t		_xmit_lock ____cacheline_aligned_in_smp;
+	int			xmit_lock_owner;
+	/*
+	 * please use this field instead of dev->trans_start
+	 */
+	unsigned long		trans_start;
+
+	/*
+	 * Number of TX timeouts for this queue
+	 * (/sys/class/net/DEV/Q/trans_timeout)
+	 */
+	unsigned long		trans_timeout;
+
+	unsigned long		state;
+
+#ifdef CONFIG_BQL
+	struct dql		dql;
+#endif
+} ____cacheline_aligned_in_smp;
+
+static inline int netdev_queue_numa_node_read(const struct netdev_queue *q)
+{
+#if defined(CONFIG_XPS) && defined(CONFIG_NUMA)
+	return q->numa_node;
+#else
+	return NUMA_NO_NODE;
+#endif
+}
+
+static inline void netdev_queue_numa_node_write(struct netdev_queue *q, int node)
+{
+#if defined(CONFIG_XPS) && defined(CONFIG_NUMA)
+	q->numa_node = node;
+#endif
+}
+
+#ifdef CONFIG_RPS
+/*
+ * This structure holds an RPS map which can be of variable length.  The
+ * map is an array of CPUs.
+ */
+struct rps_map {
+	unsigned int len;
+	struct rcu_head rcu;
+	u16 cpus[0];
+};
+#define RPS_MAP_SIZE(_num) (sizeof(struct rps_map) + ((_num) * sizeof(u16)))
+
+/*
+ * The rps_dev_flow structure contains the mapping of a flow to a CPU, the
+ * tail pointer for that CPU's input queue at the time of last enqueue, and
+ * a hardware filter index.
+ */
+struct rps_dev_flow {
+	u16 cpu;
+	u16 filter;
+	unsigned int last_qtail;
+};
+#define RPS_NO_FILTER 0xffff
+
+/*
+ * The rps_dev_flow_table structure contains a table of flow mappings.
+ */
+struct rps_dev_flow_table {
+	unsigned int mask;
+	struct rcu_head rcu;
+	struct work_struct free_work;
+	struct rps_dev_flow flows[0];
+};
+#define RPS_DEV_FLOW_TABLE_SIZE(_num) (sizeof(struct rps_dev_flow_table) + \
+    ((_num) * sizeof(struct rps_dev_flow)))
+
+/*
+ * The rps_sock_flow_table contains mappings of flows to the last CPU
+ * on which they were processed by the application (set in recvmsg).
+ */
+struct rps_sock_flow_table {
+	unsigned int mask;
+	u16 ents[0];
+};
+#define	RPS_SOCK_FLOW_TABLE_SIZE(_num) (sizeof(struct rps_sock_flow_table) + \
+    ((_num) * sizeof(u16)))
+
+#define RPS_NO_CPU 0xffff
+
+static inline void rps_record_sock_flow(struct rps_sock_flow_table *table,
+					u32 hash)
+{
+	if (table && hash) {
+		unsigned int cpu, index = hash & table->mask;
+
+		/* We only give a hint, preemption can change cpu under us */
+		cpu = raw_smp_processor_id();
+
+		if (table->ents[index] != cpu)
+			table->ents[index] = cpu;
+	}
+}
+
+static inline void rps_reset_sock_flow(struct rps_sock_flow_table *table,
+				       u32 hash)
+{
+	if (table && hash)
+		table->ents[hash & table->mask] = RPS_NO_CPU;
+}
+
+extern struct rps_sock_flow_table __rcu *rps_sock_flow_table;
+
+#ifdef CONFIG_RFS_ACCEL
+extern bool rps_may_expire_flow(struct net_device *dev, u16 rxq_index,
+				u32 flow_id, u16 filter_id);
+#endif
+
+/* This structure contains an instance of an RX queue. */
+struct netdev_rx_queue {
+	struct rps_map __rcu		*rps_map;
+	struct rps_dev_flow_table __rcu	*rps_flow_table;
+	struct kobject			kobj;
+	struct net_device		*dev;
+} ____cacheline_aligned_in_smp;
+#endif /* CONFIG_RPS */
+
+#ifdef CONFIG_XPS
+/*
+ * This structure holds an XPS map which can be of variable length.  The
+ * map is an array of queues.
+ */
+struct xps_map {
+	unsigned int len;
+	unsigned int alloc_len;
+	struct rcu_head rcu;
+	u16 queues[0];
+};
+#define XPS_MAP_SIZE(_num) (sizeof(struct xps_map) + ((_num) * sizeof(u16)))
+#define XPS_MIN_MAP_ALLOC ((L1_CACHE_BYTES - sizeof(struct xps_map))	\
+    / sizeof(u16))
+
+/*
+ * This structure holds all XPS maps for device.  Maps are indexed by CPU.
+ */
+struct xps_dev_maps {
+	struct rcu_head rcu;
+	struct xps_map __rcu *cpu_map[0];
+};
+#define XPS_DEV_MAPS_SIZE (sizeof(struct xps_dev_maps) +		\
+    (nr_cpu_ids * sizeof(struct xps_map *)))
+#endif /* CONFIG_XPS */
+
+#define TC_MAX_QUEUE	16
+#define TC_BITMASK	15
+/* HW offloaded queuing disciplines txq count and offset maps */
+struct netdev_tc_txq {
+	u16 count;
+	u16 offset;
+};
+
+#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
+/*
+ * This structure is to hold information about the device
+ * configured to run FCoE protocol stack.
+ */
+struct netdev_fcoe_hbainfo {
+	char	manufacturer[64];
+	char	serial_number[64];
+	char	hardware_version[64];
+	char	driver_version[64];
+	char	optionrom_version[64];
+	char	firmware_version[64];
+	char	model[256];
+	char	model_description[256];
+};
+#endif
+
+/*
+ * This structure defines the management hooks for network devices.
+ * The following hooks can be defined; unless noted otherwise, they are
+ * optional and can be filled with a null pointer.
+ *
+ * int (*ndo_init)(struct net_device *dev);
+ *     This function is called once when network device is registered.
+ *     The network device can use this to any late stage initializaton
+ *     or semantic validattion. It can fail with an error code which will
+ *     be propogated back to register_netdev
+ *
+ * void (*ndo_uninit)(struct net_device *dev);
+ *     This function is called when device is unregistered or when registration
+ *     fails. It is not called if init fails.
+ *
+ * int (*ndo_open)(struct net_device *dev);
+ *     This function is called when network device transistions to the up
+ *     state.
+ *
+ * int (*ndo_stop)(struct net_device *dev);
+ *     This function is called when network device transistions to the down
+ *     state.
+ *
+ * netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb,
+ *                               struct net_device *dev);
+ *	Called when a packet needs to be transmitted.
+ *	Must return NETDEV_TX_OK , NETDEV_TX_BUSY.
+ *        (can also return NETDEV_TX_LOCKED iff NETIF_F_LLTX)
+ *	Required can not be NULL.
+ *
+ * u16 (*ndo_select_queue)(struct net_device *dev, struct sk_buff *skb);
+ *	Called to decide which queue to when device supports multiple
+ *	transmit queues.
+ *
+ * void (*ndo_change_rx_flags)(struct net_device *dev, int flags);
+ *	This function is called to allow device receiver to make
+ *	changes to configuration when multicast or promiscious is enabled.
+ *
+ * void (*ndo_set_rx_mode)(struct net_device *dev);
+ *	This function is called device changes address list filtering.
+ *	If driver handles unicast address filtering, it should set
+ *	IFF_UNICAST_FLT to its priv_flags.
+ *
+ * int (*ndo_set_mac_address)(struct net_device *dev, void *addr);
+ *	This function  is called when the Media Access Control address
+ *	needs to be changed. If this interface is not defined, the
+ *	mac address can not be changed.
+ *
+ * int (*ndo_validate_addr)(struct net_device *dev);
+ *	Test if Media Access Control address is valid for the device.
+ *
+ * int (*ndo_do_ioctl)(struct net_device *dev, struct ifreq *ifr, int cmd);
+ *	Called when a user request an ioctl which can't be handled by
+ *	the generic interface code. If not defined ioctl's return
+ *	not supported error code.
+ *
+ * int (*ndo_set_config)(struct net_device *dev, struct ifmap *map);
+ *	Used to set network devices bus interface parameters. This interface
+ *	is retained for legacy reason, new devices should use the bus
+ *	interface (PCI) for low level management.
+ *
+ * int (*ndo_change_mtu)(struct net_device *dev, int new_mtu);
+ *	Called when a user wants to change the Maximum Transfer Unit
+ *	of a device. If not defined, any request to change MTU will
+ *	will return an error.
+ *
+ * void (*ndo_tx_timeout)(struct net_device *dev);
+ *	Callback uses when the transmitter has not made any progress
+ *	for dev->watchdog ticks.
+ *
+ * struct rtnl_link_stats64* (*ndo_get_stats64)(struct net_device *dev,
+ *                      struct rtnl_link_stats64 *storage);
+ * struct net_device_stats* (*ndo_get_stats)(struct net_device *dev);
+ *	Called when a user wants to get the network device usage
+ *	statistics. Drivers must do one of the following:
+ *	1. Define @ndo_get_stats64 to fill in a zero-initialised
+ *	   rtnl_link_stats64 structure passed by the caller.
+ *	2. Define @ndo_get_stats to update a net_device_stats structure
+ *	   (which should normally be dev->stats) and return a pointer to
+ *	   it. The structure may be changed asynchronously only if each
+ *	   field is written atomically.
+ *	3. Update dev->stats asynchronously and atomically, and define
+ *	   neither operation.
+ *
+ * int (*ndo_vlan_rx_add_vid)(struct net_device *dev, unsigned short vid);
+ *	If device support VLAN filtering (dev->features & NETIF_F_HW_VLAN_FILTER)
+ *	this function is called when a VLAN id is registered.
+ *
+ * int (*ndo_vlan_rx_kill_vid)(struct net_device *dev, unsigned short vid);
+ *	If device support VLAN filtering (dev->features & NETIF_F_HW_VLAN_FILTER)
+ *	this function is called when a VLAN id is unregistered.
+ *
+ * void (*ndo_poll_controller)(struct net_device *dev);
+ *
+ *	SR-IOV management functions.
+ * int (*ndo_set_vf_mac)(struct net_device *dev, int vf, u8* mac);
+ * int (*ndo_set_vf_vlan)(struct net_device *dev, int vf, u16 vlan, u8 qos);
+ * int (*ndo_set_vf_tx_rate)(struct net_device *dev, int vf, int rate);
+ * int (*ndo_set_vf_spoofchk)(struct net_device *dev, int vf, bool setting);
+ * int (*ndo_get_vf_config)(struct net_device *dev,
+ *			    int vf, struct ifla_vf_info *ivf);
+ * int (*ndo_set_vf_port)(struct net_device *dev, int vf,
+ *			  struct nlattr *port[]);
+ * int (*ndo_get_vf_port)(struct net_device *dev, int vf, struct sk_buff *skb);
+ * int (*ndo_setup_tc)(struct net_device *dev, u8 tc)
+ * 	Called to setup 'tc' number of traffic classes in the net device. This
+ * 	is always called from the stack with the rtnl lock held and netif tx
+ * 	queues stopped. This allows the netdevice to perform queue management
+ * 	safely.
+ *
+ *	Fiber Channel over Ethernet (FCoE) offload functions.
+ * int (*ndo_fcoe_enable)(struct net_device *dev);
+ *	Called when the FCoE protocol stack wants to start using LLD for FCoE
+ *	so the underlying device can perform whatever needed configuration or
+ *	initialization to support acceleration of FCoE traffic.
+ *
+ * int (*ndo_fcoe_disable)(struct net_device *dev);
+ *	Called when the FCoE protocol stack wants to stop using LLD for FCoE
+ *	so the underlying device can perform whatever needed clean-ups to
+ *	stop supporting acceleration of FCoE traffic.
+ *
+ * int (*ndo_fcoe_ddp_setup)(struct net_device *dev, u16 xid,
+ *			     struct scatterlist *sgl, unsigned int sgc);
+ *	Called when the FCoE Initiator wants to initialize an I/O that
+ *	is a possible candidate for Direct Data Placement (DDP). The LLD can
+ *	perform necessary setup and returns 1 to indicate the device is set up
+ *	successfully to perform DDP on this I/O, otherwise this returns 0.
+ *
+ * int (*ndo_fcoe_ddp_done)(struct net_device *dev,  u16 xid);
+ *	Called when the FCoE Initiator/Target is done with the DDPed I/O as
+ *	indicated by the FC exchange id 'xid', so the underlying device can
+ *	clean up and reuse resources for later DDP requests.
+ *
+ * int (*ndo_fcoe_ddp_target)(struct net_device *dev, u16 xid,
+ *			      struct scatterlist *sgl, unsigned int sgc);
+ *	Called when the FCoE Target wants to initialize an I/O that
+ *	is a possible candidate for Direct Data Placement (DDP). The LLD can
+ *	perform necessary setup and returns 1 to indicate the device is set up
+ *	successfully to perform DDP on this I/O, otherwise this returns 0.
+ *
+ * int (*ndo_fcoe_get_hbainfo)(struct net_device *dev,
+ *			       struct netdev_fcoe_hbainfo *hbainfo);
+ *	Called when the FCoE Protocol stack wants information on the underlying
+ *	device. This information is utilized by the FCoE protocol stack to
+ *	register attributes with Fiber Channel management service as per the
+ *	FC-GS Fabric Device Management Information(FDMI) specification.
+ *
+ * int (*ndo_fcoe_get_wwn)(struct net_device *dev, u64 *wwn, int type);
+ *	Called when the underlying device wants to override default World Wide
+ *	Name (WWN) generation mechanism in FCoE protocol stack to pass its own
+ *	World Wide Port Name (WWPN) or World Wide Node Name (WWNN) to the FCoE
+ *	protocol stack to use.
+ *
+ *	RFS acceleration.
+ * int (*ndo_rx_flow_steer)(struct net_device *dev, const struct sk_buff *skb,
+ *			    u16 rxq_index, u32 flow_id);
+ *	Set hardware filter for RFS.  rxq_index is the target queue index;
+ *	flow_id is a flow ID to be passed to rps_may_expire_flow() later.
+ *	Return the filter ID on success, or a negative error code.
+ *
+ *	Slave management functions (for bridge, bonding, etc). User should
+ *	call netdev_set_master() to set dev->master properly.
+ * int (*ndo_add_slave)(struct net_device *dev, struct net_device *slave_dev);
+ *	Called to make another netdev an underling.
+ *
+ * int (*ndo_del_slave)(struct net_device *dev, struct net_device *slave_dev);
+ *	Called to release previously enslaved netdev.
+ *
+ *      Feature/offload setting functions.
+ * netdev_features_t (*ndo_fix_features)(struct net_device *dev,
+ *		netdev_features_t features);
+ *	Adjusts the requested feature flags according to device-specific
+ *	constraints, and returns the resulting flags. Must not modify
+ *	the device state.
+ *
+ * int (*ndo_set_features)(struct net_device *dev, netdev_features_t features);
+ *	Called to update device configuration to new features. Passed
+ *	feature set might be less than what was returned by ndo_fix_features()).
+ *	Must return >0 or -errno if it changed dev->features itself.
+ *
+ */
+struct net_device_ops {
+	int			(*ndo_init)(struct net_device *dev);
+	void			(*ndo_uninit)(struct net_device *dev);
+	int			(*ndo_open)(struct net_device *dev);
+	int			(*ndo_stop)(struct net_device *dev);
+	netdev_tx_t		(*ndo_start_xmit) (struct sk_buff *skb,
+						   struct net_device *dev);
+	u16			(*ndo_select_queue)(struct net_device *dev,
+						    struct sk_buff *skb);
+	void			(*ndo_change_rx_flags)(struct net_device *dev,
+						       int flags);
+	void			(*ndo_set_rx_mode)(struct net_device *dev);
+	int			(*ndo_set_mac_address)(struct net_device *dev,
+						       void *addr);
+	int			(*ndo_validate_addr)(struct net_device *dev);
+	int			(*ndo_do_ioctl)(struct net_device *dev,
+					        struct ifreq *ifr, int cmd);
+	int			(*ndo_set_config)(struct net_device *dev,
+					          struct ifmap *map);
+	int			(*ndo_change_mtu)(struct net_device *dev,
+						  int new_mtu);
+	int			(*ndo_neigh_setup)(struct net_device *dev,
+						   struct neigh_parms *);
+	void			(*ndo_tx_timeout) (struct net_device *dev);
+
+	struct rtnl_link_stats64* (*ndo_get_stats64)(struct net_device *dev,
+						     struct rtnl_link_stats64 *storage);
+	struct net_device_stats* (*ndo_get_stats)(struct net_device *dev);
+
+	int			(*ndo_vlan_rx_add_vid)(struct net_device *dev,
+						       unsigned short vid);
+	int			(*ndo_vlan_rx_kill_vid)(struct net_device *dev,
+						        unsigned short vid);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	void                    (*ndo_poll_controller)(struct net_device *dev);
+	int			(*ndo_netpoll_setup)(struct net_device *dev,
+						     struct netpoll_info *info);
+	void			(*ndo_netpoll_cleanup)(struct net_device *dev);
+#endif
+	int			(*ndo_set_vf_mac)(struct net_device *dev,
+						  int queue, u8 *mac);
+	int			(*ndo_set_vf_vlan)(struct net_device *dev,
+						   int queue, u16 vlan, u8 qos);
+	int			(*ndo_set_vf_tx_rate)(struct net_device *dev,
+						      int vf, int rate);
+	int			(*ndo_set_vf_spoofchk)(struct net_device *dev,
+						       int vf, bool setting);
+	int			(*ndo_get_vf_config)(struct net_device *dev,
+						     int vf,
+						     struct ifla_vf_info *ivf);
+	int			(*ndo_set_vf_port)(struct net_device *dev,
+						   int vf,
+						   struct nlattr *port[]);
+	int			(*ndo_get_vf_port)(struct net_device *dev,
+						   int vf, struct sk_buff *skb);
+	int			(*ndo_setup_tc)(struct net_device *dev, u8 tc);
+#if IS_ENABLED(CONFIG_FCOE)
+	int			(*ndo_fcoe_enable)(struct net_device *dev);
+	int			(*ndo_fcoe_disable)(struct net_device *dev);
+	int			(*ndo_fcoe_ddp_setup)(struct net_device *dev,
+						      u16 xid,
+						      struct scatterlist *sgl,
+						      unsigned int sgc);
+	int			(*ndo_fcoe_ddp_done)(struct net_device *dev,
+						     u16 xid);
+	int			(*ndo_fcoe_ddp_target)(struct net_device *dev,
+						       u16 xid,
+						       struct scatterlist *sgl,
+						       unsigned int sgc);
+	int			(*ndo_fcoe_get_hbainfo)(struct net_device *dev,
+							struct netdev_fcoe_hbainfo *hbainfo);
+#endif
+
+#if IS_ENABLED(CONFIG_LIBFCOE)
+#define NETDEV_FCOE_WWNN 0
+#define NETDEV_FCOE_WWPN 1
+	int			(*ndo_fcoe_get_wwn)(struct net_device *dev,
+						    u64 *wwn, int type);
+#endif
+
+#ifdef CONFIG_RFS_ACCEL
+	int			(*ndo_rx_flow_steer)(struct net_device *dev,
+						     const struct sk_buff *skb,
+						     u16 rxq_index,
+						     u32 flow_id);
+#endif
+	int			(*ndo_add_slave)(struct net_device *dev,
+						 struct net_device *slave_dev);
+	int			(*ndo_del_slave)(struct net_device *dev,
+						 struct net_device *slave_dev);
+	netdev_features_t	(*ndo_fix_features)(struct net_device *dev,
+						    netdev_features_t features);
+	int			(*ndo_set_features)(struct net_device *dev,
+						    netdev_features_t features);
+	int			(*ndo_neigh_construct)(struct neighbour *n);
+	void			(*ndo_neigh_destroy)(struct neighbour *n);
+};
+
+/*
+ *	The DEVICE structure.
+ *	Actually, this whole structure is a big mistake.  It mixes I/O
+ *	data with strictly "high-level" data, and it has to know about
+ *	almost every data structure used in the INET module.
+ *
+ *	FIXME: cleanup struct net_device such that network protocol info
+ *	moves out.
+ */
+
+struct net_device {
+
+	/*
+	 * This is the first field of the "visible" part of this structure
+	 * (i.e. as seen by users in the "Space.c" file).  It is the name
+	 * of the interface.
+	 */
+	char			name[IFNAMSIZ];
+
+	struct pm_qos_request	pm_qos_req;
+
+	/* device name hash chain */
+	struct hlist_node	name_hlist;
+	/* snmp alias */
+	char 			*ifalias;
+
+	/*
+	 *	I/O specific fields
+	 *	FIXME: Merge these and struct ifmap into one
+	 */
+	unsigned long		mem_end;	/* shared mem end	*/
+	unsigned long		mem_start;	/* shared mem start	*/
+	unsigned long		base_addr;	/* device I/O address	*/
+	unsigned int		irq;		/* device IRQ number	*/
+
+	/*
+	 *	Some hardware also needs these fields, but they are not
+	 *	part of the usual set specified in Space.c.
+	 */
+
+	unsigned long		state;
+
+	struct list_head	dev_list;
+	struct list_head	napi_list;
+	struct list_head	unreg_list;
+
+	/* currently active device features */
+	netdev_features_t	features;
+	/* user-changeable features */
+	netdev_features_t	hw_features;
+	/* user-requested features */
+	netdev_features_t	wanted_features;
+	/* mask of features inheritable by VLAN devices */
+	netdev_features_t	vlan_features;
+
+	/* Interface index. Unique device identifier	*/
+	int			ifindex;
+	int			iflink;
+
+	struct net_device_stats	stats;
+	atomic_long_t		rx_dropped; /* dropped packets by core network
+					     * Do not use this in drivers.
+					     */
+
+#ifdef CONFIG_WIRELESS_EXT
+	/* List of functions to handle Wireless Extensions (instead of ioctl).
+	 * See <net/iw_handler.h> for details. Jean II */
+	const struct iw_handler_def *	wireless_handlers;
+	/* Instance data managed by the core of Wireless Extensions. */
+	struct iw_public_data *	wireless_data;
+#endif
+	/* Management operations */
+	const struct net_device_ops *netdev_ops;
+	const struct ethtool_ops *ethtool_ops;
+
+	/* Hardware header description */
+	const struct header_ops *header_ops;
+
+	unsigned int		flags;	/* interface flags (a la BSD)	*/
+	unsigned int		priv_flags; /* Like 'flags' but invisible to userspace.
+					     * See if.h for definitions. */
+	unsigned short		gflags;
+	unsigned short		padded;	/* How much padding added by alloc_netdev() */
+
+	unsigned char		operstate; /* RFC2863 operstate */
+	unsigned char		link_mode; /* mapping policy to operstate */
+
+	unsigned char		if_port;	/* Selectable AUI, TP,..*/
+	unsigned char		dma;		/* DMA channel		*/
+
+	unsigned int		mtu;	/* interface MTU value		*/
+	unsigned short		type;	/* interface hardware type	*/
+	unsigned short		hard_header_len;	/* hardware hdr length	*/
+
+	/* extra head- and tailroom the hardware may need, but not in all cases
+	 * can this be guaranteed, especially tailroom. Some cases also use
+	 * LL_MAX_HEADER instead to allocate the skb.
+	 */
+	unsigned short		needed_headroom;
+	unsigned short		needed_tailroom;
+
+	/* Interface address info. */
+	unsigned char		perm_addr[MAX_ADDR_LEN]; /* permanent hw address */
+	unsigned char		addr_assign_type; /* hw address assignment type */
+	unsigned char		addr_len;	/* hardware address length	*/
+	unsigned char		neigh_priv_len;
+	unsigned short          dev_id;		/* for shared network cards */
+
+	spinlock_t		addr_list_lock;
+	struct netdev_hw_addr_list	uc;	/* Unicast mac addresses */
+	struct netdev_hw_addr_list	mc;	/* Multicast mac addresses */
+	bool			uc_promisc;
+	unsigned int		promiscuity;
+	unsigned int		allmulti;
+
+
+	/* Protocol specific pointers */
+
+#if IS_ENABLED(CONFIG_VLAN_8021Q)
+	struct vlan_info __rcu	*vlan_info;	/* VLAN info */
+#endif
+#if IS_ENABLED(CONFIG_NET_DSA)
+	struct dsa_switch_tree	*dsa_ptr;	/* dsa specific data */
+#endif
+	void 			*atalk_ptr;	/* AppleTalk link 	*/
+	struct in_device __rcu	*ip_ptr;	/* IPv4 specific data	*/
+	struct dn_dev __rcu     *dn_ptr;        /* DECnet specific data */
+	struct inet6_dev __rcu	*ip6_ptr;       /* IPv6 specific data */
+	void			*ec_ptr;	/* Econet specific data	*/
+	void			*ax25_ptr;	/* AX.25 specific data */
+	struct wireless_dev	*ieee80211_ptr;	/* IEEE 802.11 specific data,
+						   assign before registering */
+
+/*
+ * Cache lines mostly used on receive path (including eth_type_trans())
+ */
+	unsigned long		last_rx;	/* Time of last Rx
+						 * This should not be set in
+						 * drivers, unless really needed,
+						 * because network stack (bonding)
+						 * use it if/when necessary, to
+						 * avoid dirtying this cache line.
+						 */
+
+	struct net_device	*master; /* Pointer to master device of a group,
+					  * which this device is member of.
+					  */
+
+	/* Interface address info used in eth_type_trans() */
+	unsigned char		*dev_addr;	/* hw address, (before bcast
+						   because most packets are
+						   unicast) */
+
+	struct netdev_hw_addr_list	dev_addrs; /* list of device
+						      hw addresses */
+
+	unsigned char		broadcast[MAX_ADDR_LEN];	/* hw bcast add	*/
+
+#ifdef CONFIG_SYSFS
+	struct kset		*queues_kset;
+#endif
+
+#ifdef CONFIG_RPS
+	struct netdev_rx_queue	*_rx;
+
+	/* Number of RX queues allocated at register_netdev() time */
+	unsigned int		num_rx_queues;
+
+	/* Number of RX queues currently active in device */
+	unsigned int		real_num_rx_queues;
+
+#ifdef CONFIG_RFS_ACCEL
+	/* CPU reverse-mapping for RX completion interrupts, indexed
+	 * by RX queue number.  Assigned by driver.  This must only be
+	 * set if the ndo_rx_flow_steer operation is defined. */
+	struct cpu_rmap		*rx_cpu_rmap;
+#endif
+#endif
+
+	rx_handler_func_t __rcu	*rx_handler;
+	void __rcu		*rx_handler_data;
+
+	struct netdev_queue __rcu *ingress_queue;
+
+/*
+ * Cache lines mostly used on transmit path
+ */
+	struct netdev_queue	*_tx ____cacheline_aligned_in_smp;
+
+	/* Number of TX queues allocated at alloc_netdev_mq() time  */
+	unsigned int		num_tx_queues;
+
+	/* Number of TX queues currently active in device  */
+	unsigned int		real_num_tx_queues;
+
+	/* root qdisc from userspace point of view */
+	struct Qdisc		*qdisc;
+
+	unsigned long		tx_queue_len;	/* Max frames per queue allowed */
+	spinlock_t		tx_global_lock;
+
+#ifdef CONFIG_XPS
+	struct xps_dev_maps __rcu *xps_maps;
+#endif
+
+	/* These may be needed for future network-power-down code. */
+
+	/*
+	 * trans_start here is expensive for high speed devices on SMP,
+	 * please use netdev_queue->trans_start instead.
+	 */
+	unsigned long		trans_start;	/* Time (in jiffies) of last Tx	*/
+
+	int			watchdog_timeo; /* used by dev_watchdog() */
+	struct timer_list	watchdog_timer;
+
+	/* Number of references to this device */
+	int __percpu		*pcpu_refcnt;
+
+	/* delayed register/unregister */
+	struct list_head	todo_list;
+	/* device index hash chain */
+	struct hlist_node	index_hlist;
+
+	struct list_head	link_watch_list;
+
+	/* register/unregister state machine */
+	enum { NETREG_UNINITIALIZED=0,
+	       NETREG_REGISTERED,	/* completed register_netdevice */
+	       NETREG_UNREGISTERING,	/* called unregister_netdevice */
+	       NETREG_UNREGISTERED,	/* completed unregister todo */
+	       NETREG_RELEASED,		/* called free_netdev */
+	       NETREG_DUMMY,		/* dummy device for NAPI poll */
+	} reg_state:8;
+
+	bool dismantle; /* device is going do be freed */
+
+	enum {
+		RTNL_LINK_INITIALIZED,
+		RTNL_LINK_INITIALIZING,
+	} rtnl_link_state:16;
+
+	/* Called from unregister, can be used to call free_netdev */
+	void (*destructor)(struct net_device *dev);
+
+#ifdef CONFIG_NETPOLL
+	struct netpoll_info	*npinfo;
+#endif
+
+#ifdef CONFIG_NET_NS
+	/* Network namespace this network device is inside */
+	struct net		*nd_net;
+#endif
+
+	/* mid-layer private */
+	union {
+		void				*ml_priv;
+		struct pcpu_lstats __percpu	*lstats; /* loopback stats */
+		struct pcpu_tstats __percpu	*tstats; /* tunnel stats */
+		struct pcpu_dstats __percpu	*dstats; /* dummy stats */
+	};
+	/* GARP */
+	struct garp_port __rcu	*garp_port;
+
+	/* class/net/name entry */
+	struct device		dev;
+	/* space for optional device, statistics, and wireless sysfs groups */
+	const struct attribute_group *sysfs_groups[4];
+
+	/* rtnetlink link ops */
+	const struct rtnl_link_ops *rtnl_link_ops;
+
+	/* for setting kernel sock attribute on TCP connection setup */
+#define GSO_MAX_SIZE		65536
+	unsigned int		gso_max_size;
+
+#ifdef CONFIG_DCB
+	/* Data Center Bridging netlink ops */
+	const struct dcbnl_rtnl_ops *dcbnl_ops;
+#endif
+	u8 num_tc;
+	struct netdev_tc_txq tc_to_txq[TC_MAX_QUEUE];
+	u8 prio_tc_map[TC_BITMASK + 1];
+
+#if IS_ENABLED(CONFIG_FCOE)
+	/* max exchange id for FCoE LRO by ddp */
+	unsigned int		fcoe_ddp_xid;
+#endif
+#if IS_ENABLED(CONFIG_NETPRIO_CGROUP)
+	struct netprio_map __rcu *priomap;
+#endif
+	/* phy device may attach itself for hardware timestamping */
+	struct phy_device *phydev;
+
+	/* group the device belongs to */
+	int group;
+};
+#define to_net_dev(d) container_of(d, struct net_device, dev)
+
+#define	NETDEV_ALIGN		32
+
+static inline
+int netdev_get_prio_tc_map(const struct net_device *dev, u32 prio)
+{
+	return dev->prio_tc_map[prio & TC_BITMASK];
+}
+
+static inline
+int netdev_set_prio_tc_map(struct net_device *dev, u8 prio, u8 tc)
+{
+	if (tc >= dev->num_tc)
+		return -EINVAL;
+
+	dev->prio_tc_map[prio & TC_BITMASK] = tc & TC_BITMASK;
+	return 0;
+}
+
+static inline
+void netdev_reset_tc(struct net_device *dev)
+{
+	dev->num_tc = 0;
+	memset(dev->tc_to_txq, 0, sizeof(dev->tc_to_txq));
+	memset(dev->prio_tc_map, 0, sizeof(dev->prio_tc_map));
+}
+
+static inline
+int netdev_set_tc_queue(struct net_device *dev, u8 tc, u16 count, u16 offset)
+{
+	if (tc >= dev->num_tc)
+		return -EINVAL;
+
+	dev->tc_to_txq[tc].count = count;
+	dev->tc_to_txq[tc].offset = offset;
+	return 0;
+}
+
+static inline
+int netdev_set_num_tc(struct net_device *dev, u8 num_tc)
+{
+	if (num_tc > TC_MAX_QUEUE)
+		return -EINVAL;
+
+	dev->num_tc = num_tc;
+	return 0;
+}
+
+static inline
+int netdev_get_num_tc(struct net_device *dev)
+{
+	return dev->num_tc;
+}
+
+static inline
+struct netdev_queue *netdev_get_tx_queue(const struct net_device *dev,
+					 unsigned int index)
+{
+	return &dev->_tx[index];
+}
+
+static inline void netdev_for_each_tx_queue(struct net_device *dev,
+					    void (*f)(struct net_device *,
+						      struct netdev_queue *,
+						      void *),
+					    void *arg)
+{
+	unsigned int i;
+
+	for (i = 0; i < dev->num_tx_queues; i++)
+		f(dev, &dev->_tx[i], arg);
+}
+
+/*
+ * Net namespace inlines
+ */
+static inline
+struct net *dev_net(const struct net_device *dev)
+{
+	return read_pnet(&dev->nd_net);
+}
+
+static inline
+void dev_net_set(struct net_device *dev, struct net *net)
+{
+#ifdef CONFIG_NET_NS
+	release_net(dev->nd_net);
+	dev->nd_net = hold_net(net);
+#endif
+}
+
+static inline bool netdev_uses_dsa_tags(struct net_device *dev)
+{
+#ifdef CONFIG_NET_DSA_TAG_DSA
+	if (dev->dsa_ptr != NULL)
+		return dsa_uses_dsa_tags(dev->dsa_ptr);
+#endif
+
+	return 0;
+}
+
+static inline bool netdev_uses_trailer_tags(struct net_device *dev)
+{
+#ifdef CONFIG_NET_DSA_TAG_TRAILER
+	if (dev->dsa_ptr != NULL)
+		return dsa_uses_trailer_tags(dev->dsa_ptr);
+#endif
+
+	return 0;
+}
+
+/**
+ *	netdev_priv - access network device private data
+ *	@dev: network device
+ *
+ * Get network device private data
+ */
+static inline void *netdev_priv(const struct net_device *dev)
+{
+	return (char *)dev + ALIGN(sizeof(struct net_device), NETDEV_ALIGN);
+}
+
+/* Set the sysfs physical device reference for the network logical device
+ * if set prior to registration will cause a symlink during initialization.
+ */
+#define SET_NETDEV_DEV(net, pdev)	((net)->dev.parent = (pdev))
+
+/* Set the sysfs device type for the network logical device to allow
+ * fin grained indentification of different network device types. For
+ * example Ethernet, Wirelss LAN, Bluetooth, WiMAX etc.
+ */
+#define SET_NETDEV_DEVTYPE(net, devtype)	((net)->dev.type = (devtype))
+
+/**
+ *	netif_napi_add - initialize a napi context
+ *	@dev:  network device
+ *	@napi: napi context
+ *	@poll: polling function
+ *	@weight: default weight
+ *
+ * netif_napi_add() must be used to initialize a napi context prior to calling
+ * *any* of the other napi related functions.
+ */
+void netif_napi_add(struct net_device *dev, struct napi_struct *napi,
+		    int (*poll)(struct napi_struct *, int), int weight);
+
+/**
+ *  netif_napi_del - remove a napi context
+ *  @napi: napi context
+ *
+ *  netif_napi_del() removes a napi context from the network device napi list
+ */
+void netif_napi_del(struct napi_struct *napi);
+
+struct napi_gro_cb {
+	/* Virtual address of skb_shinfo(skb)->frags[0].page + offset. */
+	void *frag0;
+
+	/* Length of frag0. */
+	unsigned int frag0_len;
+
+	/* This indicates where we are processing relative to skb->data. */
+	int data_offset;
+
+	/* This is non-zero if the packet may be of the same flow. */
+	int same_flow;
+
+	/* This is non-zero if the packet cannot be merged with the new skb. */
+	int flush;
+
+	/* Number of segments aggregated. */
+	int count;
+
+	/* Free the skb? */
+	int free;
+};
+
+#define NAPI_GRO_CB(skb) ((struct napi_gro_cb *)(skb)->cb)
+
+struct packet_type {
+	__be16			type;	/* This is really htons(ether_type). */
+	struct net_device	*dev;	/* NULL is wildcarded here	     */
+	int			(*func) (struct sk_buff *,
+					 struct net_device *,
+					 struct packet_type *,
+					 struct net_device *);
+	struct sk_buff		*(*gso_segment)(struct sk_buff *skb,
+						netdev_features_t features);
+	int			(*gso_send_check)(struct sk_buff *skb);
+	struct sk_buff		**(*gro_receive)(struct sk_buff **head,
+					       struct sk_buff *skb);
+	int			(*gro_complete)(struct sk_buff *skb);
+	void			*af_packet_priv;
+	struct list_head	list;
+};
+
+#include <linux/notifier.h>
+
+/* netdevice notifier chain. Please remember to update the rtnetlink
+ * notification exclusion list in rtnetlink_event() when adding new
+ * types.
+ */
+#define NETDEV_UP	0x0001	/* For now you can't veto a device up/down */
+#define NETDEV_DOWN	0x0002
+#define NETDEV_REBOOT	0x0003	/* Tell a protocol stack a network interface
+				   detected a hardware crash and restarted
+				   - we can use this eg to kick tcp sessions
+				   once done */
+#define NETDEV_CHANGE	0x0004	/* Notify device state change */
+#define NETDEV_REGISTER 0x0005
+#define NETDEV_UNREGISTER	0x0006
+#define NETDEV_CHANGEMTU	0x0007
+#define NETDEV_CHANGEADDR	0x0008
+#define NETDEV_GOING_DOWN	0x0009
+#define NETDEV_CHANGENAME	0x000A
+#define NETDEV_FEAT_CHANGE	0x000B
+#define NETDEV_BONDING_FAILOVER 0x000C
+#define NETDEV_PRE_UP		0x000D
+#define NETDEV_PRE_TYPE_CHANGE	0x000E
+#define NETDEV_POST_TYPE_CHANGE	0x000F
+#define NETDEV_POST_INIT	0x0010
+#define NETDEV_UNREGISTER_BATCH 0x0011
+#define NETDEV_RELEASE		0x0012
+#define NETDEV_NOTIFY_PEERS	0x0013
+#define NETDEV_JOIN		0x0014
+
+extern int register_netdevice_notifier(struct notifier_block *nb);
+extern int unregister_netdevice_notifier(struct notifier_block *nb);
+extern int call_netdevice_notifiers(unsigned long val, struct net_device *dev);
+
+
+extern rwlock_t				dev_base_lock;		/* Device list lock */
+
+
+#define for_each_netdev(net, d)		\
+		list_for_each_entry(d, &(net)->dev_base_head, dev_list)
+#define for_each_netdev_reverse(net, d)	\
+		list_for_each_entry_reverse(d, &(net)->dev_base_head, dev_list)
+#define for_each_netdev_rcu(net, d)		\
+		list_for_each_entry_rcu(d, &(net)->dev_base_head, dev_list)
+#define for_each_netdev_safe(net, d, n)	\
+		list_for_each_entry_safe(d, n, &(net)->dev_base_head, dev_list)
+#define for_each_netdev_continue(net, d)		\
+		list_for_each_entry_continue(d, &(net)->dev_base_head, dev_list)
+#define for_each_netdev_continue_rcu(net, d)		\
+	list_for_each_entry_continue_rcu(d, &(net)->dev_base_head, dev_list)
+#define net_device_entry(lh)	list_entry(lh, struct net_device, dev_list)
+
+static inline struct net_device *next_net_device(struct net_device *dev)
+{
+	struct list_head *lh;
+	struct net *net;
+
+	net = dev_net(dev);
+	lh = dev->dev_list.next;
+	return lh == &net->dev_base_head ? NULL : net_device_entry(lh);
+}
+
+static inline struct net_device *next_net_device_rcu(struct net_device *dev)
+{
+	struct list_head *lh;
+	struct net *net;
+
+	net = dev_net(dev);
+	lh = rcu_dereference(list_next_rcu(&dev->dev_list));
+	return lh == &net->dev_base_head ? NULL : net_device_entry(lh);
+}
+
+static inline struct net_device *first_net_device(struct net *net)
+{
+	return list_empty(&net->dev_base_head) ? NULL :
+		net_device_entry(net->dev_base_head.next);
+}
+
+static inline struct net_device *first_net_device_rcu(struct net *net)
+{
+	struct list_head *lh = rcu_dereference(list_next_rcu(&net->dev_base_head));
+
+	return lh == &net->dev_base_head ? NULL : net_device_entry(lh);
+}
+
+extern int 			netdev_boot_setup_check(struct net_device *dev);
+extern unsigned long		netdev_boot_base(const char *prefix, int unit);
+extern struct net_device *dev_getbyhwaddr_rcu(struct net *net, unsigned short type,
+					      const char *hwaddr);
+extern struct net_device *dev_getfirstbyhwtype(struct net *net, unsigned short type);
+extern struct net_device *__dev_getfirstbyhwtype(struct net *net, unsigned short type);
+extern void		dev_add_pack(struct packet_type *pt);
+extern void		dev_remove_pack(struct packet_type *pt);
+extern void		__dev_remove_pack(struct packet_type *pt);
+
+extern struct net_device	*dev_get_by_flags_rcu(struct net *net, unsigned short flags,
+						      unsigned short mask);
+extern struct net_device	*dev_get_by_name(struct net *net, const char *name);
+extern struct net_device	*dev_get_by_name_rcu(struct net *net, const char *name);
+extern struct net_device	*__dev_get_by_name(struct net *net, const char *name);
+extern int		dev_alloc_name(struct net_device *dev, const char *name);
+extern int		dev_open(struct net_device *dev);
+extern int		dev_close(struct net_device *dev);
+extern void		dev_disable_lro(struct net_device *dev);
+extern int		dev_queue_xmit(struct sk_buff *skb);
+extern int		register_netdevice(struct net_device *dev);
+extern void		unregister_netdevice_queue(struct net_device *dev,
+						   struct list_head *head);
+extern void		unregister_netdevice_many(struct list_head *head);
+static inline void unregister_netdevice(struct net_device *dev)
+{
+	unregister_netdevice_queue(dev, NULL);
+}
+
+extern int 		netdev_refcnt_read(const struct net_device *dev);
+extern void		free_netdev(struct net_device *dev);
+extern void		synchronize_net(void);
+extern int		init_dummy_netdev(struct net_device *dev);
+extern void		netdev_resync_ops(struct net_device *dev);
+
+extern struct net_device	*dev_get_by_index(struct net *net, int ifindex);
+extern struct net_device	*__dev_get_by_index(struct net *net, int ifindex);
+extern struct net_device	*dev_get_by_index_rcu(struct net *net, int ifindex);
+extern int		dev_restart(struct net_device *dev);
+#ifdef CONFIG_NETPOLL_TRAP
+extern int		netpoll_trap(void);
+#endif
+extern int	       skb_gro_receive(struct sk_buff **head,
+				       struct sk_buff *skb);
+extern void	       skb_gro_reset_offset(struct sk_buff *skb);
+
+static inline unsigned int skb_gro_offset(const struct sk_buff *skb)
+{
+	return NAPI_GRO_CB(skb)->data_offset;
+}
+
+static inline unsigned int skb_gro_len(const struct sk_buff *skb)
+{
+	return skb->len - NAPI_GRO_CB(skb)->data_offset;
+}
+
+static inline void skb_gro_pull(struct sk_buff *skb, unsigned int len)
+{
+	NAPI_GRO_CB(skb)->data_offset += len;
+}
+
+static inline void *skb_gro_header_fast(struct sk_buff *skb,
+					unsigned int offset)
+{
+	return NAPI_GRO_CB(skb)->frag0 + offset;
+}
+
+static inline int skb_gro_header_hard(struct sk_buff *skb, unsigned int hlen)
+{
+	return NAPI_GRO_CB(skb)->frag0_len < hlen;
+}
+
+static inline void *skb_gro_header_slow(struct sk_buff *skb, unsigned int hlen,
+					unsigned int offset)
+{
+	if (!pskb_may_pull(skb, hlen))
+		return NULL;
+
+	NAPI_GRO_CB(skb)->frag0 = NULL;
+	NAPI_GRO_CB(skb)->frag0_len = 0;
+	return skb->data + offset;
+}
+
+static inline void *skb_gro_mac_header(struct sk_buff *skb)
+{
+	return NAPI_GRO_CB(skb)->frag0 ?: skb_mac_header(skb);
+}
+
+static inline void *skb_gro_network_header(struct sk_buff *skb)
+{
+	return (NAPI_GRO_CB(skb)->frag0 ?: skb->data) +
+	       skb_network_offset(skb);
+}
+
+static inline int dev_hard_header(struct sk_buff *skb, struct net_device *dev,
+				  unsigned short type,
+				  const void *daddr, const void *saddr,
+				  unsigned len)
+{
+	if (!dev->header_ops || !dev->header_ops->create)
+		return 0;
+
+	return dev->header_ops->create(skb, dev, type, daddr, saddr, len);
+}
+
+static inline int dev_parse_header(const struct sk_buff *skb,
+				   unsigned char *haddr)
+{
+	const struct net_device *dev = skb->dev;
+
+	if (!dev->header_ops || !dev->header_ops->parse)
+		return 0;
+	return dev->header_ops->parse(skb, haddr);
+}
+
+typedef int gifconf_func_t(struct net_device * dev, char __user * bufptr, int len);
+extern int		register_gifconf(unsigned int family, gifconf_func_t * gifconf);
+static inline int unregister_gifconf(unsigned int family)
+{
+	return register_gifconf(family, NULL);
+}
+
+/*
+ * Incoming packets are placed on per-cpu queues
+ */
+struct softnet_data {
+	struct Qdisc		*output_queue;
+	struct Qdisc		**output_queue_tailp;
+	struct list_head	poll_list;
+	struct sk_buff		*completion_queue;
+	struct sk_buff_head	process_queue;
+
+	/* stats */
+	unsigned int		processed;
+	unsigned int		time_squeeze;
+	unsigned int		cpu_collision;
+	unsigned int		received_rps;
+
+#ifdef CONFIG_RPS
+	struct softnet_data	*rps_ipi_list;
+
+	/* Elements below can be accessed between CPUs for RPS */
+	struct call_single_data	csd ____cacheline_aligned_in_smp;
+	struct softnet_data	*rps_ipi_next;
+	unsigned int		cpu;
+	unsigned int		input_queue_head;
+	unsigned int		input_queue_tail;
+#endif
+	unsigned		dropped;
+	struct sk_buff_head	input_pkt_queue;
+	struct napi_struct	backlog;
+};
+
+static inline void input_queue_head_incr(struct softnet_data *sd)
+{
+#ifdef CONFIG_RPS
+	sd->input_queue_head++;
+#endif
+}
+
+static inline void input_queue_tail_incr_save(struct softnet_data *sd,
+					      unsigned int *qtail)
+{
+#ifdef CONFIG_RPS
+	*qtail = ++sd->input_queue_tail;
+#endif
+}
+
+DECLARE_PER_CPU_ALIGNED(struct softnet_data, softnet_data);
+
+extern void __netif_schedule(struct Qdisc *q);
+
+static inline void netif_schedule_queue(struct netdev_queue *txq)
+{
+	if (!(txq->state & QUEUE_STATE_ANY_XOFF))
+		__netif_schedule(txq->qdisc);
+}
+
+static inline void netif_tx_schedule_all(struct net_device *dev)
+{
+	unsigned int i;
+
+	for (i = 0; i < dev->num_tx_queues; i++)
+		netif_schedule_queue(netdev_get_tx_queue(dev, i));
+}
+
+static inline void netif_tx_start_queue(struct netdev_queue *dev_queue)
+{
+	clear_bit(__QUEUE_STATE_DRV_XOFF, &dev_queue->state);
+}
+
+/**
+ *	netif_start_queue - allow transmit
+ *	@dev: network device
+ *
+ *	Allow upper layers to call the device hard_start_xmit routine.
+ */
+static inline void netif_start_queue(struct net_device *dev)
+{
+	netif_tx_start_queue(netdev_get_tx_queue(dev, 0));
+}
+
+static inline void netif_tx_start_all_queues(struct net_device *dev)
+{
+	unsigned int i;
+
+	for (i = 0; i < dev->num_tx_queues; i++) {
+		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+		netif_tx_start_queue(txq);
+	}
+}
+
+static inline void netif_tx_wake_queue(struct netdev_queue *dev_queue)
+{
+#ifdef CONFIG_NETPOLL_TRAP
+	if (netpoll_trap()) {
+		netif_tx_start_queue(dev_queue);
+		return;
+	}
+#endif
+	if (test_and_clear_bit(__QUEUE_STATE_DRV_XOFF, &dev_queue->state))
+		__netif_schedule(dev_queue->qdisc);
+}
+
+/**
+ *	netif_wake_queue - restart transmit
+ *	@dev: network device
+ *
+ *	Allow upper layers to call the device hard_start_xmit routine.
+ *	Used for flow control when transmit resources are available.
+ */
+static inline void netif_wake_queue(struct net_device *dev)
+{
+	netif_tx_wake_queue(netdev_get_tx_queue(dev, 0));
+}
+
+static inline void netif_tx_wake_all_queues(struct net_device *dev)
+{
+	unsigned int i;
+
+	for (i = 0; i < dev->num_tx_queues; i++) {
+		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+		netif_tx_wake_queue(txq);
+	}
+}
+
+static inline void netif_tx_stop_queue(struct netdev_queue *dev_queue)
+{
+	if (WARN_ON(!dev_queue)) {
+		pr_info("netif_stop_queue() cannot be called before register_netdev()\n");
+		return;
+	}
+	set_bit(__QUEUE_STATE_DRV_XOFF, &dev_queue->state);
+}
+
+/**
+ *	netif_stop_queue - stop transmitted packets
+ *	@dev: network device
+ *
+ *	Stop upper layers calling the device hard_start_xmit routine.
+ *	Used for flow control when transmit resources are unavailable.
+ */
+static inline void netif_stop_queue(struct net_device *dev)
+{
+	netif_tx_stop_queue(netdev_get_tx_queue(dev, 0));
+}
+
+static inline void netif_tx_stop_all_queues(struct net_device *dev)
+{
+	unsigned int i;
+
+	for (i = 0; i < dev->num_tx_queues; i++) {
+		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+		netif_tx_stop_queue(txq);
+	}
+}
+
+static inline bool netif_tx_queue_stopped(const struct netdev_queue *dev_queue)
+{
+	return test_bit(__QUEUE_STATE_DRV_XOFF, &dev_queue->state);
+}
+
+/**
+ *	netif_queue_stopped - test if transmit queue is flowblocked
+ *	@dev: network device
+ *
+ *	Test if transmit queue on device is currently unable to send.
+ */
+static inline bool netif_queue_stopped(const struct net_device *dev)
+{
+	return netif_tx_queue_stopped(netdev_get_tx_queue(dev, 0));
+}
+
+static inline bool netif_xmit_stopped(const struct netdev_queue *dev_queue)
+{
+	return dev_queue->state & QUEUE_STATE_ANY_XOFF;
+}
+
+static inline bool netif_xmit_frozen_or_stopped(const struct netdev_queue *dev_queue)
+{
+	return dev_queue->state & QUEUE_STATE_ANY_XOFF_OR_FROZEN;
+}
+
+static inline void netdev_tx_sent_queue(struct netdev_queue *dev_queue,
+					unsigned int bytes)
+{
+#ifdef CONFIG_BQL
+	dql_queued(&dev_queue->dql, bytes);
+
+	if (likely(dql_avail(&dev_queue->dql) >= 0))
+		return;
+
+	set_bit(__QUEUE_STATE_STACK_XOFF, &dev_queue->state);
+
+	/*
+	 * The XOFF flag must be set before checking the dql_avail below,
+	 * because in netdev_tx_completed_queue we update the dql_completed
+	 * before checking the XOFF flag.
+	 */
+	smp_mb();
+
+	/* check again in case another CPU has just made room avail */
+	if (unlikely(dql_avail(&dev_queue->dql) >= 0))
+		clear_bit(__QUEUE_STATE_STACK_XOFF, &dev_queue->state);
+#endif
+}
+
+static inline void netdev_sent_queue(struct net_device *dev, unsigned int bytes)
+{
+	netdev_tx_sent_queue(netdev_get_tx_queue(dev, 0), bytes);
+}
+
+static inline void netdev_tx_completed_queue(struct netdev_queue *dev_queue,
+					     unsigned pkts, unsigned bytes)
+{
+#ifdef CONFIG_BQL
+	if (unlikely(!bytes))
+		return;
+
+	dql_completed(&dev_queue->dql, bytes);
+
+	/*
+	 * Without the memory barrier there is a small possiblity that
+	 * netdev_tx_sent_queue will miss the update and cause the queue to
+	 * be stopped forever
+	 */
+	smp_mb();
+
+	if (dql_avail(&dev_queue->dql) < 0)
+		return;
+
+	if (test_and_clear_bit(__QUEUE_STATE_STACK_XOFF, &dev_queue->state))
+		netif_schedule_queue(dev_queue);
+#endif
+}
+
+static inline void netdev_completed_queue(struct net_device *dev,
+					  unsigned pkts, unsigned bytes)
+{
+	netdev_tx_completed_queue(netdev_get_tx_queue(dev, 0), pkts, bytes);
+}
+
+static inline void netdev_tx_reset_queue(struct netdev_queue *q)
+{
+#ifdef CONFIG_BQL
+	clear_bit(__QUEUE_STATE_STACK_XOFF, &q->state);
+	dql_reset(&q->dql);
+#endif
+}
+
+static inline void netdev_reset_queue(struct net_device *dev_queue)
+{
+	netdev_tx_reset_queue(netdev_get_tx_queue(dev_queue, 0));
+}
+
+/**
+ *	netif_running - test if up
+ *	@dev: network device
+ *
+ *	Test if the device has been brought up.
+ */
+static inline bool netif_running(const struct net_device *dev)
+{
+	return test_bit(__LINK_STATE_START, &dev->state);
+}
+
+/*
+ * Routines to manage the subqueues on a device.  We only need start
+ * stop, and a check if it's stopped.  All other device management is
+ * done at the overall netdevice level.
+ * Also test the device if we're multiqueue.
+ */
+
+/**
+ *	netif_start_subqueue - allow sending packets on subqueue
+ *	@dev: network device
+ *	@queue_index: sub queue index
+ *
+ * Start individual transmit queue of a device with multiple transmit queues.
+ */
+static inline void netif_start_subqueue(struct net_device *dev, u16 queue_index)
+{
+	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue_index);
+
+	netif_tx_start_queue(txq);
+}
+
+/**
+ *	netif_stop_subqueue - stop sending packets on subqueue
+ *	@dev: network device
+ *	@queue_index: sub queue index
+ *
+ * Stop individual transmit queue of a device with multiple transmit queues.
+ */
+static inline void netif_stop_subqueue(struct net_device *dev, u16 queue_index)
+{
+	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue_index);
+#ifdef CONFIG_NETPOLL_TRAP
+	if (netpoll_trap())
+		return;
+#endif
+	netif_tx_stop_queue(txq);
+}
+
+/**
+ *	netif_subqueue_stopped - test status of subqueue
+ *	@dev: network device
+ *	@queue_index: sub queue index
+ *
+ * Check individual transmit queue of a device with multiple transmit queues.
+ */
+static inline bool __netif_subqueue_stopped(const struct net_device *dev,
+					    u16 queue_index)
+{
+	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue_index);
+
+	return netif_tx_queue_stopped(txq);
+}
+
+static inline bool netif_subqueue_stopped(const struct net_device *dev,
+					  struct sk_buff *skb)
+{
+	return __netif_subqueue_stopped(dev, skb_get_queue_mapping(skb));
+}
+
+/**
+ *	netif_wake_subqueue - allow sending packets on subqueue
+ *	@dev: network device
+ *	@queue_index: sub queue index
+ *
+ * Resume individual transmit queue of a device with multiple transmit queues.
+ */
+static inline void netif_wake_subqueue(struct net_device *dev, u16 queue_index)
+{
+	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue_index);
+#ifdef CONFIG_NETPOLL_TRAP
+	if (netpoll_trap())
+		return;
+#endif
+	if (test_and_clear_bit(__QUEUE_STATE_DRV_XOFF, &txq->state))
+		__netif_schedule(txq->qdisc);
+}
+
+/*
+ * Returns a Tx hash for the given packet when dev->real_num_tx_queues is used
+ * as a distribution range limit for the returned value.
+ */
+static inline u16 skb_tx_hash(const struct net_device *dev,
+			      const struct sk_buff *skb)
+{
+	return __skb_tx_hash(dev, skb, dev->real_num_tx_queues);
+}
+
+/**
+ *	netif_is_multiqueue - test if device has multiple transmit queues
+ *	@dev: network device
+ *
+ * Check if device has multiple transmit queues
+ */
+static inline bool netif_is_multiqueue(const struct net_device *dev)
+{
+	return dev->num_tx_queues > 1;
+}
+
+extern int netif_set_real_num_tx_queues(struct net_device *dev,
+					unsigned int txq);
+
+#ifdef CONFIG_RPS
+extern int netif_set_real_num_rx_queues(struct net_device *dev,
+					unsigned int rxq);
+#else
+static inline int netif_set_real_num_rx_queues(struct net_device *dev,
+						unsigned int rxq)
+{
+	return 0;
+}
+#endif
+
+static inline int netif_copy_real_num_queues(struct net_device *to_dev,
+					     const struct net_device *from_dev)
+{
+	netif_set_real_num_tx_queues(to_dev, from_dev->real_num_tx_queues);
+#ifdef CONFIG_RPS
+	return netif_set_real_num_rx_queues(to_dev,
+					    from_dev->real_num_rx_queues);
+#else
+	return 0;
+#endif
+}
+
+/* Use this variant when it is known for sure that it
+ * is executing from hardware interrupt context or with hardware interrupts
+ * disabled.
+ */
+extern void dev_kfree_skb_irq(struct sk_buff *skb);
+
+/* Use this variant in places where it could be invoked
+ * from either hardware interrupt or other context, with hardware interrupts
+ * either disabled or enabled.
+ */
+extern void dev_kfree_skb_any(struct sk_buff *skb);
+
+extern int		netif_rx(struct sk_buff *skb);
+extern int		netif_rx_ni(struct sk_buff *skb);
+extern int		netif_receive_skb(struct sk_buff *skb);
+extern gro_result_t	dev_gro_receive(struct napi_struct *napi,
+					struct sk_buff *skb);
+extern gro_result_t	napi_skb_finish(gro_result_t ret, struct sk_buff *skb);
+extern gro_result_t	napi_gro_receive(struct napi_struct *napi,
+					 struct sk_buff *skb);
+extern void		napi_gro_flush(struct napi_struct *napi);
+extern struct sk_buff *	napi_get_frags(struct napi_struct *napi);
+extern gro_result_t	napi_frags_finish(struct napi_struct *napi,
+					  struct sk_buff *skb,
+					  gro_result_t ret);
+extern struct sk_buff *	napi_frags_skb(struct napi_struct *napi);
+extern gro_result_t	napi_gro_frags(struct napi_struct *napi);
+
+static inline void napi_free_frags(struct napi_struct *napi)
+{
+	kfree_skb(napi->skb);
+	napi->skb = NULL;
+}
+
+extern int netdev_rx_handler_register(struct net_device *dev,
+				      rx_handler_func_t *rx_handler,
+				      void *rx_handler_data);
+extern void netdev_rx_handler_unregister(struct net_device *dev);
+
+extern bool		dev_valid_name(const char *name);
+extern int		dev_ioctl(struct net *net, unsigned int cmd, void __user *);
+extern int		dev_ethtool(struct net *net, struct ifreq *);
+extern unsigned		dev_get_flags(const struct net_device *);
+extern int		__dev_change_flags(struct net_device *, unsigned int flags);
+extern int		dev_change_flags(struct net_device *, unsigned);
+extern void		__dev_notify_flags(struct net_device *, unsigned int old_flags);
+extern int		dev_change_name(struct net_device *, const char *);
+extern int		dev_set_alias(struct net_device *, const char *, size_t);
+extern int		dev_change_net_namespace(struct net_device *,
+						 struct net *, const char *);
+extern int		dev_set_mtu(struct net_device *, int);
+extern void		dev_set_group(struct net_device *, int);
+extern int		dev_set_mac_address(struct net_device *,
+					    struct sockaddr *);
+extern int		dev_hard_start_xmit(struct sk_buff *skb,
+					    struct net_device *dev,
+					    struct netdev_queue *txq);
+extern int		dev_forward_skb(struct net_device *dev,
+					struct sk_buff *skb);
+
+extern int		netdev_budget;
+
+/* Called by rtnetlink.c:rtnl_unlock() */
+extern void netdev_run_todo(void);
+
+/**
+ *	dev_put - release reference to device
+ *	@dev: network device
+ *
+ * Release reference to device to allow it to be freed.
+ */
+static inline void dev_put(struct net_device *dev)
+{
+	this_cpu_dec(*dev->pcpu_refcnt);
+}
+
+/**
+ *	dev_hold - get reference to device
+ *	@dev: network device
+ *
+ * Hold reference to device to keep it from being freed.
+ */
+static inline void dev_hold(struct net_device *dev)
+{
+	this_cpu_inc(*dev->pcpu_refcnt);
+}
+
+/* Carrier loss detection, dial on demand. The functions netif_carrier_on
+ * and _off may be called from IRQ context, but it is caller
+ * who is responsible for serialization of these calls.
+ *
+ * The name carrier is inappropriate, these functions should really be
+ * called netif_lowerlayer_*() because they represent the state of any
+ * kind of lower layer not just hardware media.
+ */
+
+extern void linkwatch_fire_event(struct net_device *dev);
+extern void linkwatch_forget_dev(struct net_device *dev);
+
+/**
+ *	netif_carrier_ok - test if carrier present
+ *	@dev: network device
+ *
+ * Check if carrier is present on device
+ */
+static inline bool netif_carrier_ok(const struct net_device *dev)
+{
+	return !test_bit(__LINK_STATE_NOCARRIER, &dev->state);
+}
+
+extern unsigned long dev_trans_start(struct net_device *dev);
+
+extern void __netdev_watchdog_up(struct net_device *dev);
+
+extern void netif_carrier_on(struct net_device *dev);
+
+extern void netif_carrier_off(struct net_device *dev);
+
+extern void netif_notify_peers(struct net_device *dev);
+
+/**
+ *	netif_dormant_on - mark device as dormant.
+ *	@dev: network device
+ *
+ * Mark device as dormant (as per RFC2863).
+ *
+ * The dormant state indicates that the relevant interface is not
+ * actually in a condition to pass packets (i.e., it is not 'up') but is
+ * in a "pending" state, waiting for some external event.  For "on-
+ * demand" interfaces, this new state identifies the situation where the
+ * interface is waiting for events to place it in the up state.
+ *
+ */
+static inline void netif_dormant_on(struct net_device *dev)
+{
+	if (!test_and_set_bit(__LINK_STATE_DORMANT, &dev->state))
+		linkwatch_fire_event(dev);
+}
+
+/**
+ *	netif_dormant_off - set device as not dormant.
+ *	@dev: network device
+ *
+ * Device is not in dormant state.
+ */
+static inline void netif_dormant_off(struct net_device *dev)
+{
+	if (test_and_clear_bit(__LINK_STATE_DORMANT, &dev->state))
+		linkwatch_fire_event(dev);
+}
+
+/**
+ *	netif_dormant - test if carrier present
+ *	@dev: network device
+ *
+ * Check if carrier is present on device
+ */
+static inline bool netif_dormant(const struct net_device *dev)
+{
+	return test_bit(__LINK_STATE_DORMANT, &dev->state);
+}
+
+
+/**
+ *	netif_oper_up - test if device is operational
+ *	@dev: network device
+ *
+ * Check if carrier is operational
+ */
+static inline bool netif_oper_up(const struct net_device *dev)
+{
+	return (dev->operstate == IF_OPER_UP ||
+		dev->operstate == IF_OPER_UNKNOWN /* backward compat */);
+}
+
+/**
+ *	netif_device_present - is device available or removed
+ *	@dev: network device
+ *
+ * Check if device has not been removed from system.
+ */
+static inline bool netif_device_present(struct net_device *dev)
+{
+	return test_bit(__LINK_STATE_PRESENT, &dev->state);
+}
+
+extern void netif_device_detach(struct net_device *dev);
+
+extern void netif_device_attach(struct net_device *dev);
+
+/*
+ * Network interface message level settings
+ */
+
+enum {
+	NETIF_MSG_DRV		= 0x0001,
+	NETIF_MSG_PROBE		= 0x0002,
+	NETIF_MSG_LINK		= 0x0004,
+	NETIF_MSG_TIMER		= 0x0008,
+	NETIF_MSG_IFDOWN	= 0x0010,
+	NETIF_MSG_IFUP		= 0x0020,
+	NETIF_MSG_RX_ERR	= 0x0040,
+	NETIF_MSG_TX_ERR	= 0x0080,
+	NETIF_MSG_TX_QUEUED	= 0x0100,
+	NETIF_MSG_INTR		= 0x0200,
+	NETIF_MSG_TX_DONE	= 0x0400,
+	NETIF_MSG_RX_STATUS	= 0x0800,
+	NETIF_MSG_PKTDATA	= 0x1000,
+	NETIF_MSG_HW		= 0x2000,
+	NETIF_MSG_WOL		= 0x4000,
+};
+
+#define netif_msg_drv(p)	((p)->msg_enable & NETIF_MSG_DRV)
+#define netif_msg_probe(p)	((p)->msg_enable & NETIF_MSG_PROBE)
+#define netif_msg_link(p)	((p)->msg_enable & NETIF_MSG_LINK)
+#define netif_msg_timer(p)	((p)->msg_enable & NETIF_MSG_TIMER)
+#define netif_msg_ifdown(p)	((p)->msg_enable & NETIF_MSG_IFDOWN)
+#define netif_msg_ifup(p)	((p)->msg_enable & NETIF_MSG_IFUP)
+#define netif_msg_rx_err(p)	((p)->msg_enable & NETIF_MSG_RX_ERR)
+#define netif_msg_tx_err(p)	((p)->msg_enable & NETIF_MSG_TX_ERR)
+#define netif_msg_tx_queued(p)	((p)->msg_enable & NETIF_MSG_TX_QUEUED)
+#define netif_msg_intr(p)	((p)->msg_enable & NETIF_MSG_INTR)
+#define netif_msg_tx_done(p)	((p)->msg_enable & NETIF_MSG_TX_DONE)
+#define netif_msg_rx_status(p)	((p)->msg_enable & NETIF_MSG_RX_STATUS)
+#define netif_msg_pktdata(p)	((p)->msg_enable & NETIF_MSG_PKTDATA)
+#define netif_msg_hw(p)		((p)->msg_enable & NETIF_MSG_HW)
+#define netif_msg_wol(p)	((p)->msg_enable & NETIF_MSG_WOL)
+
+static inline u32 netif_msg_init(int debug_value, int default_msg_enable_bits)
+{
+	/* use default */
+	if (debug_value < 0 || debug_value >= (sizeof(u32) * 8))
+		return default_msg_enable_bits;
+	if (debug_value == 0)	/* no output */
+		return 0;
+	/* set low N bits */
+	return (1 << debug_value) - 1;
+}
+
+static inline void __netif_tx_lock(struct netdev_queue *txq, int cpu)
+{
+	spin_lock(&txq->_xmit_lock);
+	txq->xmit_lock_owner = cpu;
+}
+
+static inline void __netif_tx_lock_bh(struct netdev_queue *txq)
+{
+	spin_lock_bh(&txq->_xmit_lock);
+	txq->xmit_lock_owner = smp_processor_id();
+}
+
+static inline bool __netif_tx_trylock(struct netdev_queue *txq)
+{
+	bool ok = spin_trylock(&txq->_xmit_lock);
+	if (likely(ok))
+		txq->xmit_lock_owner = smp_processor_id();
+	return ok;
+}
+
+static inline void __netif_tx_unlock(struct netdev_queue *txq)
+{
+	txq->xmit_lock_owner = -1;
+	spin_unlock(&txq->_xmit_lock);
+}
+
+static inline void __netif_tx_unlock_bh(struct netdev_queue *txq)
+{
+	txq->xmit_lock_owner = -1;
+	spin_unlock_bh(&txq->_xmit_lock);
+}
+
+static inline void txq_trans_update(struct netdev_queue *txq)
+{
+	if (txq->xmit_lock_owner != -1)
+		txq->trans_start = jiffies;
+}
+
+/**
+ *	netif_tx_lock - grab network device transmit lock
+ *	@dev: network device
+ *
+ * Get network device transmit lock
+ */
+static inline void netif_tx_lock(struct net_device *dev)
+{
+	unsigned int i;
+	int cpu;
+
+	spin_lock(&dev->tx_global_lock);
+	cpu = smp_processor_id();
+	for (i = 0; i < dev->num_tx_queues; i++) {
+		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+
+		/* We are the only thread of execution doing a
+		 * freeze, but we have to grab the _xmit_lock in
+		 * order to synchronize with threads which are in
+		 * the ->hard_start_xmit() handler and already
+		 * checked the frozen bit.
+		 */
+		__netif_tx_lock(txq, cpu);
+		set_bit(__QUEUE_STATE_FROZEN, &txq->state);
+		__netif_tx_unlock(txq);
+	}
+}
+
+static inline void netif_tx_lock_bh(struct net_device *dev)
+{
+	local_bh_disable();
+	netif_tx_lock(dev);
+}
+
+static inline void netif_tx_unlock(struct net_device *dev)
+{
+	unsigned int i;
+
+	for (i = 0; i < dev->num_tx_queues; i++) {
+		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+
+		/* No need to grab the _xmit_lock here.  If the
+		 * queue is not stopped for another reason, we
+		 * force a schedule.
+		 */
+		clear_bit(__QUEUE_STATE_FROZEN, &txq->state);
+		netif_schedule_queue(txq);
+	}
+	spin_unlock(&dev->tx_global_lock);
+}
+
+static inline void netif_tx_unlock_bh(struct net_device *dev)
+{
+	netif_tx_unlock(dev);
+	local_bh_enable();
+}
+
+#define HARD_TX_LOCK(dev, txq, cpu) {			\
+	if ((dev->features & NETIF_F_LLTX) == 0) {	\
+		__netif_tx_lock(txq, cpu);		\
+	}						\
+}
+
+#define HARD_TX_UNLOCK(dev, txq) {			\
+	if ((dev->features & NETIF_F_LLTX) == 0) {	\
+		__netif_tx_unlock(txq);			\
+	}						\
+}
+
+static inline void netif_tx_disable(struct net_device *dev)
+{
+	unsigned int i;
+	int cpu;
+
+	local_bh_disable();
+	cpu = smp_processor_id();
+	for (i = 0; i < dev->num_tx_queues; i++) {
+		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+
+		__netif_tx_lock(txq, cpu);
+		netif_tx_stop_queue(txq);
+		__netif_tx_unlock(txq);
+	}
+	local_bh_enable();
+}
+
+static inline void netif_addr_lock(struct net_device *dev)
+{
+	spin_lock(&dev->addr_list_lock);
+}
+
+static inline void netif_addr_lock_nested(struct net_device *dev)
+{
+	spin_lock_nested(&dev->addr_list_lock, SINGLE_DEPTH_NESTING);
+}
+
+static inline void netif_addr_lock_bh(struct net_device *dev)
+{
+	spin_lock_bh(&dev->addr_list_lock);
+}
+
+static inline void netif_addr_unlock(struct net_device *dev)
+{
+	spin_unlock(&dev->addr_list_lock);
+}
+
+static inline void netif_addr_unlock_bh(struct net_device *dev)
+{
+	spin_unlock_bh(&dev->addr_list_lock);
+}
+
+/*
+ * dev_addrs walker. Should be used only for read access. Call with
+ * rcu_read_lock held.
+ */
+#define for_each_dev_addr(dev, ha) \
+		list_for_each_entry_rcu(ha, &dev->dev_addrs.list, list)
+
+/* These functions live elsewhere (drivers/net/net_init.c, but related) */
+
+extern void		ether_setup(struct net_device *dev);
+
+/* Support for loadable net-drivers */
+extern struct net_device *alloc_netdev_mqs(int sizeof_priv, const char *name,
+				       void (*setup)(struct net_device *),
+				       unsigned int txqs, unsigned int rxqs);
+#define alloc_netdev(sizeof_priv, name, setup) \
+	alloc_netdev_mqs(sizeof_priv, name, setup, 1, 1)
+
+#define alloc_netdev_mq(sizeof_priv, name, setup, count) \
+	alloc_netdev_mqs(sizeof_priv, name, setup, count, count)
+
+extern int		register_netdev(struct net_device *dev);
+extern void		unregister_netdev(struct net_device *dev);
+
+/* General hardware address lists handling functions */
+extern int __hw_addr_add_multiple(struct netdev_hw_addr_list *to_list,
+				  struct netdev_hw_addr_list *from_list,
+				  int addr_len, unsigned char addr_type);
+extern void __hw_addr_del_multiple(struct netdev_hw_addr_list *to_list,
+				   struct netdev_hw_addr_list *from_list,
+				   int addr_len, unsigned char addr_type);
+extern int __hw_addr_sync(struct netdev_hw_addr_list *to_list,
+			  struct netdev_hw_addr_list *from_list,
+			  int addr_len);
+extern void __hw_addr_unsync(struct netdev_hw_addr_list *to_list,
+			     struct netdev_hw_addr_list *from_list,
+			     int addr_len);
+extern void __hw_addr_flush(struct netdev_hw_addr_list *list);
+extern void __hw_addr_init(struct netdev_hw_addr_list *list);
+
+/* Functions used for device addresses handling */
+extern int dev_addr_add(struct net_device *dev, unsigned char *addr,
+			unsigned char addr_type);
+extern int dev_addr_del(struct net_device *dev, unsigned char *addr,
+			unsigned char addr_type);
+extern int dev_addr_add_multiple(struct net_device *to_dev,
+				 struct net_device *from_dev,
+				 unsigned char addr_type);
+extern int dev_addr_del_multiple(struct net_device *to_dev,
+				 struct net_device *from_dev,
+				 unsigned char addr_type);
+extern void dev_addr_flush(struct net_device *dev);
+extern int dev_addr_init(struct net_device *dev);
+
+/* Functions used for unicast addresses handling */
+extern int dev_uc_add(struct net_device *dev, unsigned char *addr);
+extern int dev_uc_del(struct net_device *dev, unsigned char *addr);
+extern int dev_uc_sync(struct net_device *to, struct net_device *from);
+extern void dev_uc_unsync(struct net_device *to, struct net_device *from);
+extern void dev_uc_flush(struct net_device *dev);
+extern void dev_uc_init(struct net_device *dev);
+
+/* Functions used for multicast addresses handling */
+extern int dev_mc_add(struct net_device *dev, unsigned char *addr);
+extern int dev_mc_add_global(struct net_device *dev, unsigned char *addr);
+extern int dev_mc_del(struct net_device *dev, unsigned char *addr);
+extern int dev_mc_del_global(struct net_device *dev, unsigned char *addr);
+extern int dev_mc_sync(struct net_device *to, struct net_device *from);
+extern void dev_mc_unsync(struct net_device *to, struct net_device *from);
+extern void dev_mc_flush(struct net_device *dev);
+extern void dev_mc_init(struct net_device *dev);
+
+/* Functions used for secondary unicast and multicast support */
+extern void		dev_set_rx_mode(struct net_device *dev);
+extern void		__dev_set_rx_mode(struct net_device *dev);
+extern int		dev_set_promiscuity(struct net_device *dev, int inc);
+extern int		dev_set_allmulti(struct net_device *dev, int inc);
+extern void		netdev_state_change(struct net_device *dev);
+extern int		netdev_bonding_change(struct net_device *dev,
+					      unsigned long event);
+extern void		netdev_features_change(struct net_device *dev);
+/* Load a device via the kmod */
+extern void		dev_load(struct net *net, const char *name);
+extern void		dev_mcast_init(void);
+extern struct rtnl_link_stats64 *dev_get_stats(struct net_device *dev,
+					       struct rtnl_link_stats64 *storage);
+extern void netdev_stats_to_stats64(struct rtnl_link_stats64 *stats64,
+				    const struct net_device_stats *netdev_stats);
+
+extern int		netdev_max_backlog;
+extern int		netdev_tstamp_prequeue;
+extern int		weight_p;
+extern int		bpf_jit_enable;
+extern int		netdev_set_master(struct net_device *dev, struct net_device *master);
+extern int netdev_set_bond_master(struct net_device *dev,
+				  struct net_device *master);
+extern int skb_checksum_help(struct sk_buff *skb);
+extern struct sk_buff *skb_gso_segment(struct sk_buff *skb,
+	netdev_features_t features);
+#ifdef CONFIG_BUG
+extern void netdev_rx_csum_fault(struct net_device *dev);
+#else
+static inline void netdev_rx_csum_fault(struct net_device *dev)
+{
+}
+#endif
+/* rx skb timestamps */
+extern void		net_enable_timestamp(void);
+extern void		net_disable_timestamp(void);
+
+#ifdef CONFIG_PROC_FS
+extern void *dev_seq_start(struct seq_file *seq, loff_t *pos);
+extern void *dev_seq_next(struct seq_file *seq, void *v, loff_t *pos);
+extern void dev_seq_stop(struct seq_file *seq, void *v);
+#endif
+
+extern int netdev_class_create_file(struct class_attribute *class_attr);
+extern void netdev_class_remove_file(struct class_attribute *class_attr);
+
+extern struct kobj_ns_type_operations net_ns_type_operations;
+
+extern const char *netdev_drivername(const struct net_device *dev);
+
+extern void linkwatch_run_queue(void);
+
+static inline netdev_features_t netdev_get_wanted_features(
+	struct net_device *dev)
+{
+	return (dev->features & ~dev->hw_features) | dev->wanted_features;
+}
+netdev_features_t netdev_increment_features(netdev_features_t all,
+	netdev_features_t one, netdev_features_t mask);
+int __netdev_update_features(struct net_device *dev);
+void netdev_update_features(struct net_device *dev);
+void netdev_change_features(struct net_device *dev);
+
+void netif_stacked_transfer_operstate(const struct net_device *rootdev,
+					struct net_device *dev);
+
+netdev_features_t netif_skb_features(struct sk_buff *skb);
+
+static inline bool net_gso_ok(netdev_features_t features, int gso_type)
+{
+	netdev_features_t feature = gso_type << NETIF_F_GSO_SHIFT;
+
+	/* check flags correspondence */
+	BUILD_BUG_ON(SKB_GSO_TCPV4   != (NETIF_F_TSO >> NETIF_F_GSO_SHIFT));
+	BUILD_BUG_ON(SKB_GSO_UDP     != (NETIF_F_UFO >> NETIF_F_GSO_SHIFT));
+	BUILD_BUG_ON(SKB_GSO_DODGY   != (NETIF_F_GSO_ROBUST >> NETIF_F_GSO_SHIFT));
+	BUILD_BUG_ON(SKB_GSO_TCP_ECN != (NETIF_F_TSO_ECN >> NETIF_F_GSO_SHIFT));
+	BUILD_BUG_ON(SKB_GSO_TCPV6   != (NETIF_F_TSO6 >> NETIF_F_GSO_SHIFT));
+	BUILD_BUG_ON(SKB_GSO_FCOE    != (NETIF_F_FSO >> NETIF_F_GSO_SHIFT));
+
+	return (features & feature) == feature;
+}
+
+static inline bool skb_gso_ok(struct sk_buff *skb, netdev_features_t features)
+{
+	return net_gso_ok(features, skb_shinfo(skb)->gso_type) &&
+	       (!skb_has_frag_list(skb) || (features & NETIF_F_FRAGLIST));
+}
+
+static inline bool netif_needs_gso(struct sk_buff *skb,
+				   netdev_features_t features)
+{
+	return skb_is_gso(skb) && (!skb_gso_ok(skb, features) ||
+		unlikely((skb->ip_summed != CHECKSUM_PARTIAL) &&
+			 (skb->ip_summed != CHECKSUM_UNNECESSARY)));
+}
+
+static inline void netif_set_gso_max_size(struct net_device *dev,
+					  unsigned int size)
+{
+	dev->gso_max_size = size;
+}
+
+static inline bool netif_is_bond_slave(struct net_device *dev)
+{
+	return dev->flags & IFF_SLAVE && dev->priv_flags & IFF_BONDING;
+}
+
+static inline bool netif_supports_nofcs(struct net_device *dev)
+{
+	return dev->priv_flags & IFF_SUPP_NOFCS;
+}
+
+extern struct pernet_operations __net_initdata loopback_net_ops;
+
+/* Logging, debugging and troubleshooting/diagnostic helpers. */
+
+/* netdev_printk helpers, similar to dev_printk */
+
+static inline const char *netdev_name(const struct net_device *dev)
+{
+	if (dev->reg_state != NETREG_REGISTERED)
+		return "(unregistered net_device)";
+	return dev->name;
+}
+
+extern int __netdev_printk(const char *level, const struct net_device *dev,
+			struct va_format *vaf);
+
+extern __printf(3, 4)
+int netdev_printk(const char *level, const struct net_device *dev,
+		  const char *format, ...);
+extern __printf(2, 3)
+int netdev_emerg(const struct net_device *dev, const char *format, ...);
+extern __printf(2, 3)
+int netdev_alert(const struct net_device *dev, const char *format, ...);
+extern __printf(2, 3)
+int netdev_crit(const struct net_device *dev, const char *format, ...);
+extern __printf(2, 3)
+int netdev_err(const struct net_device *dev, const char *format, ...);
+extern __printf(2, 3)
+int netdev_warn(const struct net_device *dev, const char *format, ...);
+extern __printf(2, 3)
+int netdev_notice(const struct net_device *dev, const char *format, ...);
+extern __printf(2, 3)
+int netdev_info(const struct net_device *dev, const char *format, ...);
+
+#define MODULE_ALIAS_NETDEV(device) \
+	MODULE_ALIAS("netdev-" device)
+
+#if defined(CONFIG_DYNAMIC_DEBUG)
+#define netdev_dbg(__dev, format, args...)			\
+do {								\
+	dynamic_netdev_dbg(__dev, format, ##args);		\
+} while (0)
+#elif defined(DEBUG)
+#define netdev_dbg(__dev, format, args...)			\
+	netdev_printk(KERN_DEBUG, __dev, format, ##args)
+#else
+#define netdev_dbg(__dev, format, args...)			\
+({								\
+	if (0)							\
+		netdev_printk(KERN_DEBUG, __dev, format, ##args); \
+	0;							\
+})
+#endif
+
+#if defined(VERBOSE_DEBUG)
+#define netdev_vdbg	netdev_dbg
+#else
+
+#define netdev_vdbg(dev, format, args...)			\
+({								\
+	if (0)							\
+		netdev_printk(KERN_DEBUG, dev, format, ##args);	\
+	0;							\
+})
+#endif
+
+/*
+ * netdev_WARN() acts like dev_printk(), but with the key difference
+ * of using a WARN/WARN_ON to get the message out, including the
+ * file/line information and a backtrace.
+ */
+#define netdev_WARN(dev, format, args...)			\
+	WARN(1, "netdevice: %s\n" format, netdev_name(dev), ##args);
+
+/* netif printk helpers, similar to netdev_printk */
+
+#define netif_printk(priv, type, level, dev, fmt, args...)	\
+do {					  			\
+	if (netif_msg_##type(priv))				\
+		netdev_printk(level, (dev), fmt, ##args);	\
+} while (0)
+
+#define netif_level(level, priv, type, dev, fmt, args...)	\
+do {								\
+	if (netif_msg_##type(priv))				\
+		netdev_##level(dev, fmt, ##args);		\
+} while (0)
+
+#define netif_emerg(priv, type, dev, fmt, args...)		\
+	netif_level(emerg, priv, type, dev, fmt, ##args)
+#define netif_alert(priv, type, dev, fmt, args...)		\
+	netif_level(alert, priv, type, dev, fmt, ##args)
+#define netif_crit(priv, type, dev, fmt, args...)		\
+	netif_level(crit, priv, type, dev, fmt, ##args)
+#define netif_err(priv, type, dev, fmt, args...)		\
+	netif_level(err, priv, type, dev, fmt, ##args)
+#define netif_warn(priv, type, dev, fmt, args...)		\
+	netif_level(warn, priv, type, dev, fmt, ##args)
+#define netif_notice(priv, type, dev, fmt, args...)		\
+	netif_level(notice, priv, type, dev, fmt, ##args)
+#define netif_info(priv, type, dev, fmt, args...)		\
+	netif_level(info, priv, type, dev, fmt, ##args)
+
+#if defined(DEBUG)
+#define netif_dbg(priv, type, dev, format, args...)		\
+	netif_printk(priv, type, KERN_DEBUG, dev, format, ##args)
+#elif defined(CONFIG_DYNAMIC_DEBUG)
+#define netif_dbg(priv, type, netdev, format, args...)		\
+do {								\
+	if (netif_msg_##type(priv))				\
+		dynamic_netdev_dbg(netdev, format, ##args);	\
+} while (0)
+#else
+#define netif_dbg(priv, type, dev, format, args...)			\
+({									\
+	if (0)								\
+		netif_printk(priv, type, KERN_DEBUG, dev, format, ##args); \
+	0;								\
+})
+#endif
+
+#if defined(VERBOSE_DEBUG)
+#define netif_vdbg	netif_dbg
+#else
+#define netif_vdbg(priv, type, dev, format, args...)		\
+({								\
+	if (0)							\
+		netif_printk(priv, type, KERN_DEBUG, dev, format, ##args); \
+	0;							\
+})
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif	/* _LINUX_NETDEVICE_H */
diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h
new file mode 100644
index 00000000..29734be3
--- /dev/null
+++ b/include/linux/netfilter.h
@@ -0,0 +1,397 @@
+#ifndef __LINUX_NETFILTER_H
+#define __LINUX_NETFILTER_H
+
+#ifdef __KERNEL__
+#include <linux/init.h>
+#include <linux/skbuff.h>
+#include <linux/net.h>
+#include <linux/if.h>
+#include <linux/in.h>
+#include <linux/in6.h>
+#include <linux/wait.h>
+#include <linux/list.h>
+#endif
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/sysctl.h>
+
+/* Responses from hook functions. */
+#define NF_DROP 0
+#define NF_ACCEPT 1
+#define NF_STOLEN 2
+#define NF_QUEUE 3
+#define NF_REPEAT 4
+#define NF_STOP 5
+#define NF_MAX_VERDICT NF_STOP
+
+/* we overload the higher bits for encoding auxiliary data such as the queue
+ * number or errno values. Not nice, but better than additional function
+ * arguments. */
+#define NF_VERDICT_MASK 0x000000ff
+
+/* extra verdict flags have mask 0x0000ff00 */
+#define NF_VERDICT_FLAG_QUEUE_BYPASS	0x00008000
+
+/* queue number (NF_QUEUE) or errno (NF_DROP) */
+#define NF_VERDICT_QMASK 0xffff0000
+#define NF_VERDICT_QBITS 16
+
+#define NF_QUEUE_NR(x) ((((x) << 16) & NF_VERDICT_QMASK) | NF_QUEUE)
+
+#define NF_DROP_ERR(x) (((-x) << 16) | NF_DROP)
+
+/* only for userspace compatibility */
+#ifndef __KERNEL__
+/* Generic cache responses from hook functions.
+   <= 0x2000 is used for protocol-flags. */
+#define NFC_UNKNOWN 0x4000
+#define NFC_ALTERED 0x8000
+
+/* NF_VERDICT_BITS should be 8 now, but userspace might break if this changes */
+#define NF_VERDICT_BITS 16
+#endif
+
+enum nf_inet_hooks {
+	NF_INET_PRE_ROUTING,
+	NF_INET_LOCAL_IN,
+	NF_INET_FORWARD,
+	NF_INET_LOCAL_OUT,
+	NF_INET_POST_ROUTING,
+	NF_INET_NUMHOOKS
+};
+
+enum {
+	NFPROTO_UNSPEC =  0,
+	NFPROTO_IPV4   =  2,
+	NFPROTO_ARP    =  3,
+	NFPROTO_BRIDGE =  7,
+	NFPROTO_IPV6   = 10,
+	NFPROTO_DECNET = 12,
+	NFPROTO_NUMPROTO,
+};
+
+union nf_inet_addr {
+	__u32		all[4];
+	__be32		ip;
+	__be32		ip6[4];
+	struct in_addr	in;
+	struct in6_addr	in6;
+};
+
+#ifdef __KERNEL__
+#ifdef CONFIG_NETFILTER
+static inline int NF_DROP_GETERR(int verdict)
+{
+	return -(verdict >> NF_VERDICT_QBITS);
+}
+
+static inline int nf_inet_addr_cmp(const union nf_inet_addr *a1,
+				   const union nf_inet_addr *a2)
+{
+	return a1->all[0] == a2->all[0] &&
+	       a1->all[1] == a2->all[1] &&
+	       a1->all[2] == a2->all[2] &&
+	       a1->all[3] == a2->all[3];
+}
+
+extern void netfilter_init(void);
+
+/* Largest hook number + 1 */
+#define NF_MAX_HOOKS 8
+
+struct sk_buff;
+
+typedef unsigned int nf_hookfn(unsigned int hooknum,
+			       struct sk_buff *skb,
+			       const struct net_device *in,
+			       const struct net_device *out,
+			       int (*okfn)(struct sk_buff *));
+
+struct nf_hook_ops {
+	struct list_head list;
+
+	/* User fills in from here down. */
+	nf_hookfn *hook;
+	struct module *owner;
+	u_int8_t pf;
+	unsigned int hooknum;
+	/* Hooks are ordered in ascending priority. */
+	int priority;
+};
+
+struct nf_sockopt_ops {
+	struct list_head list;
+
+	u_int8_t pf;
+
+	/* Non-inclusive ranges: use 0/0/NULL to never get called. */
+	int set_optmin;
+	int set_optmax;
+	int (*set)(struct sock *sk, int optval, void __user *user, unsigned int len);
+#ifdef CONFIG_COMPAT
+	int (*compat_set)(struct sock *sk, int optval,
+			void __user *user, unsigned int len);
+#endif
+	int get_optmin;
+	int get_optmax;
+	int (*get)(struct sock *sk, int optval, void __user *user, int *len);
+#ifdef CONFIG_COMPAT
+	int (*compat_get)(struct sock *sk, int optval,
+			void __user *user, int *len);
+#endif
+	/* Use the module struct to lock set/get code in place */
+	struct module *owner;
+};
+
+/* Function to register/unregister hook points. */
+int nf_register_hook(struct nf_hook_ops *reg);
+void nf_unregister_hook(struct nf_hook_ops *reg);
+int nf_register_hooks(struct nf_hook_ops *reg, unsigned int n);
+void nf_unregister_hooks(struct nf_hook_ops *reg, unsigned int n);
+
+/* Functions to register get/setsockopt ranges (non-inclusive).  You
+   need to check permissions yourself! */
+int nf_register_sockopt(struct nf_sockopt_ops *reg);
+void nf_unregister_sockopt(struct nf_sockopt_ops *reg);
+
+#ifdef CONFIG_SYSCTL
+/* Sysctl registration */
+extern struct ctl_path nf_net_netfilter_sysctl_path[];
+extern struct ctl_path nf_net_ipv4_netfilter_sysctl_path[];
+#endif /* CONFIG_SYSCTL */
+
+extern struct list_head nf_hooks[NFPROTO_NUMPROTO][NF_MAX_HOOKS];
+
+#if defined(CONFIG_JUMP_LABEL)
+#include <linux/static_key.h>
+extern struct static_key nf_hooks_needed[NFPROTO_NUMPROTO][NF_MAX_HOOKS];
+static inline bool nf_hooks_active(u_int8_t pf, unsigned int hook)
+{
+	if (__builtin_constant_p(pf) &&
+	    __builtin_constant_p(hook))
+		return static_key_false(&nf_hooks_needed[pf][hook]);
+
+	return !list_empty(&nf_hooks[pf][hook]);
+}
+#else
+static inline bool nf_hooks_active(u_int8_t pf, unsigned int hook)
+{
+	return !list_empty(&nf_hooks[pf][hook]);
+}
+#endif
+
+int nf_hook_slow(u_int8_t pf, unsigned int hook, struct sk_buff *skb,
+		 struct net_device *indev, struct net_device *outdev,
+		 int (*okfn)(struct sk_buff *), int thresh);
+
+/**
+ *	nf_hook_thresh - call a netfilter hook
+ *	
+ *	Returns 1 if the hook has allowed the packet to pass.  The function
+ *	okfn must be invoked by the caller in this case.  Any other return
+ *	value indicates the packet has been consumed by the hook.
+ */
+static inline int nf_hook_thresh(u_int8_t pf, unsigned int hook,
+				 struct sk_buff *skb,
+				 struct net_device *indev,
+				 struct net_device *outdev,
+				 int (*okfn)(struct sk_buff *), int thresh)
+{
+	if (nf_hooks_active(pf, hook))
+		return nf_hook_slow(pf, hook, skb, indev, outdev, okfn, thresh);
+	return 1;
+}
+
+static inline int nf_hook(u_int8_t pf, unsigned int hook, struct sk_buff *skb,
+			  struct net_device *indev, struct net_device *outdev,
+			  int (*okfn)(struct sk_buff *))
+{
+	return nf_hook_thresh(pf, hook, skb, indev, outdev, okfn, INT_MIN);
+}
+                   
+/* Activate hook; either okfn or kfree_skb called, unless a hook
+   returns NF_STOLEN (in which case, it's up to the hook to deal with
+   the consequences).
+
+   Returns -ERRNO if packet dropped.  Zero means queued, stolen or
+   accepted.
+*/
+
+/* RR:
+   > I don't want nf_hook to return anything because people might forget
+   > about async and trust the return value to mean "packet was ok".
+
+   AK:
+   Just document it clearly, then you can expect some sense from kernel
+   coders :)
+*/
+
+static inline int
+NF_HOOK_THRESH(uint8_t pf, unsigned int hook, struct sk_buff *skb,
+	       struct net_device *in, struct net_device *out,
+	       int (*okfn)(struct sk_buff *), int thresh)
+{
+	int ret = nf_hook_thresh(pf, hook, skb, in, out, okfn, thresh);
+	if (ret == 1)
+		ret = okfn(skb);
+	return ret;
+}
+
+static inline int
+NF_HOOK_COND(uint8_t pf, unsigned int hook, struct sk_buff *skb,
+	     struct net_device *in, struct net_device *out,
+	     int (*okfn)(struct sk_buff *), bool cond)
+{
+	int ret;
+
+	if (!cond ||
+	    ((ret = nf_hook_thresh(pf, hook, skb, in, out, okfn, INT_MIN)) == 1))
+		ret = okfn(skb);
+	return ret;
+}
+
+static inline int
+NF_HOOK(uint8_t pf, unsigned int hook, struct sk_buff *skb,
+	struct net_device *in, struct net_device *out,
+	int (*okfn)(struct sk_buff *))
+{
+	return NF_HOOK_THRESH(pf, hook, skb, in, out, okfn, INT_MIN);
+}
+
+/* Call setsockopt() */
+int nf_setsockopt(struct sock *sk, u_int8_t pf, int optval, char __user *opt,
+		  unsigned int len);
+int nf_getsockopt(struct sock *sk, u_int8_t pf, int optval, char __user *opt,
+		  int *len);
+#ifdef CONFIG_COMPAT
+int compat_nf_setsockopt(struct sock *sk, u_int8_t pf, int optval,
+		char __user *opt, unsigned int len);
+int compat_nf_getsockopt(struct sock *sk, u_int8_t pf, int optval,
+		char __user *opt, int *len);
+#endif
+
+/* Call this before modifying an existing packet: ensures it is
+   modifiable and linear to the point you care about (writable_len).
+   Returns true or false. */
+extern int skb_make_writable(struct sk_buff *skb, unsigned int writable_len);
+
+struct flowi;
+struct nf_queue_entry;
+
+struct nf_afinfo {
+	unsigned short	family;
+	__sum16		(*checksum)(struct sk_buff *skb, unsigned int hook,
+				    unsigned int dataoff, u_int8_t protocol);
+	__sum16		(*checksum_partial)(struct sk_buff *skb,
+					    unsigned int hook,
+					    unsigned int dataoff,
+					    unsigned int len,
+					    u_int8_t protocol);
+	int		(*route)(struct net *net, struct dst_entry **dst,
+				 struct flowi *fl, bool strict);
+	void		(*saveroute)(const struct sk_buff *skb,
+				     struct nf_queue_entry *entry);
+	int		(*reroute)(struct sk_buff *skb,
+				   const struct nf_queue_entry *entry);
+	int		route_key_size;
+};
+
+extern const struct nf_afinfo __rcu *nf_afinfo[NFPROTO_NUMPROTO];
+static inline const struct nf_afinfo *nf_get_afinfo(unsigned short family)
+{
+	return rcu_dereference(nf_afinfo[family]);
+}
+
+static inline __sum16
+nf_checksum(struct sk_buff *skb, unsigned int hook, unsigned int dataoff,
+	    u_int8_t protocol, unsigned short family)
+{
+	const struct nf_afinfo *afinfo;
+	__sum16 csum = 0;
+
+	rcu_read_lock();
+	afinfo = nf_get_afinfo(family);
+	if (afinfo)
+		csum = afinfo->checksum(skb, hook, dataoff, protocol);
+	rcu_read_unlock();
+	return csum;
+}
+
+static inline __sum16
+nf_checksum_partial(struct sk_buff *skb, unsigned int hook,
+		    unsigned int dataoff, unsigned int len,
+		    u_int8_t protocol, unsigned short family)
+{
+	const struct nf_afinfo *afinfo;
+	__sum16 csum = 0;
+
+	rcu_read_lock();
+	afinfo = nf_get_afinfo(family);
+	if (afinfo)
+		csum = afinfo->checksum_partial(skb, hook, dataoff, len,
+						protocol);
+	rcu_read_unlock();
+	return csum;
+}
+
+extern int nf_register_afinfo(const struct nf_afinfo *afinfo);
+extern void nf_unregister_afinfo(const struct nf_afinfo *afinfo);
+
+#include <net/flow.h>
+extern void (*ip_nat_decode_session)(struct sk_buff *, struct flowi *);
+
+static inline void
+nf_nat_decode_session(struct sk_buff *skb, struct flowi *fl, u_int8_t family)
+{
+#ifdef CONFIG_NF_NAT_NEEDED
+	void (*decodefn)(struct sk_buff *, struct flowi *);
+
+	if (family == AF_INET) {
+		rcu_read_lock();
+		decodefn = rcu_dereference(ip_nat_decode_session);
+		if (decodefn)
+			decodefn(skb, fl);
+		rcu_read_unlock();
+	}
+#endif
+}
+
+#ifdef CONFIG_PROC_FS
+#include <linux/proc_fs.h>
+extern struct proc_dir_entry *proc_net_netfilter;
+#endif
+
+#else /* !CONFIG_NETFILTER */
+#define NF_HOOK(pf, hook, skb, indev, outdev, okfn) (okfn)(skb)
+#define NF_HOOK_COND(pf, hook, skb, indev, outdev, okfn, cond) (okfn)(skb)
+static inline int nf_hook_thresh(u_int8_t pf, unsigned int hook,
+				 struct sk_buff *skb,
+				 struct net_device *indev,
+				 struct net_device *outdev,
+				 int (*okfn)(struct sk_buff *), int thresh)
+{
+	return okfn(skb);
+}
+static inline int nf_hook(u_int8_t pf, unsigned int hook, struct sk_buff *skb,
+			  struct net_device *indev, struct net_device *outdev,
+			  int (*okfn)(struct sk_buff *))
+{
+	return 1;
+}
+struct flowi;
+static inline void
+nf_nat_decode_session(struct sk_buff *skb, struct flowi *fl, u_int8_t family)
+{
+}
+#endif /*CONFIG_NETFILTER*/
+
+#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
+extern void (*ip_ct_attach)(struct sk_buff *, struct sk_buff *) __rcu;
+extern void nf_ct_attach(struct sk_buff *, struct sk_buff *);
+extern void (*nf_ct_destroy)(struct nf_conntrack *) __rcu;
+#else
+static inline void nf_ct_attach(struct sk_buff *new, struct sk_buff *skb) {}
+#endif
+
+#endif /*__KERNEL__*/
+#endif /*__LINUX_NETFILTER_H*/
diff --git a/include/linux/netfilter/Kbuild b/include/linux/netfilter/Kbuild
new file mode 100644
index 00000000..16970363
--- /dev/null
+++ b/include/linux/netfilter/Kbuild
@@ -0,0 +1,77 @@
+header-y += ipset/
+
+header-y += nf_conntrack_common.h
+header-y += nf_conntrack_ftp.h
+header-y += nf_conntrack_sctp.h
+header-y += nf_conntrack_tcp.h
+header-y += nf_conntrack_tuple_common.h
+header-y += nf_nat.h
+header-y += nfnetlink.h
+header-y += nfnetlink_acct.h
+header-y += nfnetlink_compat.h
+header-y += nfnetlink_conntrack.h
+header-y += nfnetlink_cttimeout.h
+header-y += nfnetlink_log.h
+header-y += nfnetlink_queue.h
+header-y += x_tables.h
+header-y += xt_AUDIT.h
+header-y += xt_CHECKSUM.h
+header-y += xt_CLASSIFY.h
+header-y += xt_CONNMARK.h
+header-y += xt_CONNSECMARK.h
+header-y += xt_CT.h
+header-y += xt_DSCP.h
+header-y += xt_IDLETIMER.h
+header-y += xt_LED.h
+header-y += xt_LOG.h
+header-y += xt_MARK.h
+header-y += xt_nfacct.h
+header-y += xt_NFLOG.h
+header-y += xt_NFQUEUE.h
+header-y += xt_RATEEST.h
+header-y += xt_SECMARK.h
+header-y += xt_TCPMSS.h
+header-y += xt_TCPOPTSTRIP.h
+header-y += xt_TEE.h
+header-y += xt_TPROXY.h
+header-y += xt_addrtype.h
+header-y += xt_cluster.h
+header-y += xt_comment.h
+header-y += xt_connbytes.h
+header-y += xt_connlimit.h
+header-y += xt_connmark.h
+header-y += xt_conntrack.h
+header-y += xt_cpu.h
+header-y += xt_dccp.h
+header-y += xt_devgroup.h
+header-y += xt_dscp.h
+header-y += xt_ecn.h
+header-y += xt_esp.h
+header-y += xt_hashlimit.h
+header-y += xt_helper.h
+header-y += xt_iprange.h
+header-y += xt_ipvs.h
+header-y += xt_length.h
+header-y += xt_limit.h
+header-y += xt_mac.h
+header-y += xt_mark.h
+header-y += xt_multiport.h
+header-y += xt_osf.h
+header-y += xt_owner.h
+header-y += xt_physdev.h
+header-y += xt_pkttype.h
+header-y += xt_policy.h
+header-y += xt_quota.h
+header-y += xt_rateest.h
+header-y += xt_realm.h
+header-y += xt_recent.h
+header-y += xt_set.h
+header-y += xt_sctp.h
+header-y += xt_socket.h
+header-y += xt_state.h
+header-y += xt_statistic.h
+header-y += xt_string.h
+header-y += xt_tcpmss.h
+header-y += xt_tcpudp.h
+header-y += xt_time.h
+header-y += xt_u32.h
diff --git a/include/linux/netfilter/ipset/Kbuild b/include/linux/netfilter/ipset/Kbuild
new file mode 100644
index 00000000..601fe71d
--- /dev/null
+++ b/include/linux/netfilter/ipset/Kbuild
@@ -0,0 +1,4 @@
+header-y += ip_set.h
+header-y += ip_set_bitmap.h
+header-y += ip_set_hash.h
+header-y += ip_set_list.h
diff --git a/include/linux/netfilter/ipset/ip_set.h b/include/linux/netfilter/ipset/ip_set.h
new file mode 100644
index 00000000..2f8e18a2
--- /dev/null
+++ b/include/linux/netfilter/ipset/ip_set.h
@@ -0,0 +1,489 @@
+#ifndef _IP_SET_H
+#define _IP_SET_H
+
+/* Copyright (C) 2000-2002 Joakim Axelsson <gozem@linux.nu>
+ *                         Patrick Schaaf <bof@bof.de>
+ *                         Martin Josefsson <gandalf@wlug.westbo.se>
+ * Copyright (C) 2003-2011 Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+
+/* The protocol version */
+#define IPSET_PROTOCOL		6
+
+/* The max length of strings including NUL: set and type identifiers */
+#define IPSET_MAXNAMELEN	32
+
+/* Message types and commands */
+enum ipset_cmd {
+	IPSET_CMD_NONE,
+	IPSET_CMD_PROTOCOL,	/* 1: Return protocol version */
+	IPSET_CMD_CREATE,	/* 2: Create a new (empty) set */
+	IPSET_CMD_DESTROY,	/* 3: Destroy a (empty) set */
+	IPSET_CMD_FLUSH,	/* 4: Remove all elements from a set */
+	IPSET_CMD_RENAME,	/* 5: Rename a set */
+	IPSET_CMD_SWAP,		/* 6: Swap two sets */
+	IPSET_CMD_LIST,		/* 7: List sets */
+	IPSET_CMD_SAVE,		/* 8: Save sets */
+	IPSET_CMD_ADD,		/* 9: Add an element to a set */
+	IPSET_CMD_DEL,		/* 10: Delete an element from a set */
+	IPSET_CMD_TEST,		/* 11: Test an element in a set */
+	IPSET_CMD_HEADER,	/* 12: Get set header data only */
+	IPSET_CMD_TYPE,		/* 13: Get set type */
+	IPSET_MSG_MAX,		/* Netlink message commands */
+
+	/* Commands in userspace: */
+	IPSET_CMD_RESTORE = IPSET_MSG_MAX, /* 14: Enter restore mode */
+	IPSET_CMD_HELP,		/* 15: Get help */
+	IPSET_CMD_VERSION,	/* 16: Get program version */
+	IPSET_CMD_QUIT,		/* 17: Quit from interactive mode */
+
+	IPSET_CMD_MAX,
+
+	IPSET_CMD_COMMIT = IPSET_CMD_MAX, /* 18: Commit buffered commands */
+};
+
+/* Attributes at command level */
+enum {
+	IPSET_ATTR_UNSPEC,
+	IPSET_ATTR_PROTOCOL,	/* 1: Protocol version */
+	IPSET_ATTR_SETNAME,	/* 2: Name of the set */
+	IPSET_ATTR_TYPENAME,	/* 3: Typename */
+	IPSET_ATTR_SETNAME2 = IPSET_ATTR_TYPENAME, /* Setname at rename/swap */
+	IPSET_ATTR_REVISION,	/* 4: Settype revision */
+	IPSET_ATTR_FAMILY,	/* 5: Settype family */
+	IPSET_ATTR_FLAGS,	/* 6: Flags at command level */
+	IPSET_ATTR_DATA,	/* 7: Nested attributes */
+	IPSET_ATTR_ADT,		/* 8: Multiple data containers */
+	IPSET_ATTR_LINENO,	/* 9: Restore lineno */
+	IPSET_ATTR_PROTOCOL_MIN, /* 10: Minimal supported version number */
+	IPSET_ATTR_REVISION_MIN	= IPSET_ATTR_PROTOCOL_MIN, /* type rev min */
+	__IPSET_ATTR_CMD_MAX,
+};
+#define IPSET_ATTR_CMD_MAX	(__IPSET_ATTR_CMD_MAX - 1)
+
+/* CADT specific attributes */
+enum {
+	IPSET_ATTR_IP = IPSET_ATTR_UNSPEC + 1,
+	IPSET_ATTR_IP_FROM = IPSET_ATTR_IP,
+	IPSET_ATTR_IP_TO,	/* 2 */
+	IPSET_ATTR_CIDR,	/* 3 */
+	IPSET_ATTR_PORT,	/* 4 */
+	IPSET_ATTR_PORT_FROM = IPSET_ATTR_PORT,
+	IPSET_ATTR_PORT_TO,	/* 5 */
+	IPSET_ATTR_TIMEOUT,	/* 6 */
+	IPSET_ATTR_PROTO,	/* 7 */
+	IPSET_ATTR_CADT_FLAGS,	/* 8 */
+	IPSET_ATTR_CADT_LINENO = IPSET_ATTR_LINENO,	/* 9 */
+	/* Reserve empty slots */
+	IPSET_ATTR_CADT_MAX = 16,
+	/* Create-only specific attributes */
+	IPSET_ATTR_GC,
+	IPSET_ATTR_HASHSIZE,
+	IPSET_ATTR_MAXELEM,
+	IPSET_ATTR_NETMASK,
+	IPSET_ATTR_PROBES,
+	IPSET_ATTR_RESIZE,
+	IPSET_ATTR_SIZE,
+	/* Kernel-only */
+	IPSET_ATTR_ELEMENTS,
+	IPSET_ATTR_REFERENCES,
+	IPSET_ATTR_MEMSIZE,
+
+	__IPSET_ATTR_CREATE_MAX,
+};
+#define IPSET_ATTR_CREATE_MAX	(__IPSET_ATTR_CREATE_MAX - 1)
+
+/* ADT specific attributes */
+enum {
+	IPSET_ATTR_ETHER = IPSET_ATTR_CADT_MAX + 1,
+	IPSET_ATTR_NAME,
+	IPSET_ATTR_NAMEREF,
+	IPSET_ATTR_IP2,
+	IPSET_ATTR_CIDR2,
+	IPSET_ATTR_IP2_TO,
+	IPSET_ATTR_IFACE,
+	__IPSET_ATTR_ADT_MAX,
+};
+#define IPSET_ATTR_ADT_MAX	(__IPSET_ATTR_ADT_MAX - 1)
+
+/* IP specific attributes */
+enum {
+	IPSET_ATTR_IPADDR_IPV4 = IPSET_ATTR_UNSPEC + 1,
+	IPSET_ATTR_IPADDR_IPV6,
+	__IPSET_ATTR_IPADDR_MAX,
+};
+#define IPSET_ATTR_IPADDR_MAX	(__IPSET_ATTR_IPADDR_MAX - 1)
+
+/* Error codes */
+enum ipset_errno {
+	IPSET_ERR_PRIVATE = 4096,
+	IPSET_ERR_PROTOCOL,
+	IPSET_ERR_FIND_TYPE,
+	IPSET_ERR_MAX_SETS,
+	IPSET_ERR_BUSY,
+	IPSET_ERR_EXIST_SETNAME2,
+	IPSET_ERR_TYPE_MISMATCH,
+	IPSET_ERR_EXIST,
+	IPSET_ERR_INVALID_CIDR,
+	IPSET_ERR_INVALID_NETMASK,
+	IPSET_ERR_INVALID_FAMILY,
+	IPSET_ERR_TIMEOUT,
+	IPSET_ERR_REFERENCED,
+	IPSET_ERR_IPADDR_IPV4,
+	IPSET_ERR_IPADDR_IPV6,
+
+	/* Type specific error codes */
+	IPSET_ERR_TYPE_SPECIFIC = 4352,
+};
+
+/* Flags at command level */
+enum ipset_cmd_flags {
+	IPSET_FLAG_BIT_EXIST	= 0,
+	IPSET_FLAG_EXIST	= (1 << IPSET_FLAG_BIT_EXIST),
+	IPSET_FLAG_BIT_LIST_SETNAME = 1,
+	IPSET_FLAG_LIST_SETNAME	= (1 << IPSET_FLAG_BIT_LIST_SETNAME),
+	IPSET_FLAG_BIT_LIST_HEADER = 2,
+	IPSET_FLAG_LIST_HEADER	= (1 << IPSET_FLAG_BIT_LIST_HEADER),
+	IPSET_FLAG_CMD_MAX = 15,	/* Lower half */
+};
+
+/* Flags at CADT attribute level */
+enum ipset_cadt_flags {
+	IPSET_FLAG_BIT_BEFORE	= 0,
+	IPSET_FLAG_BEFORE	= (1 << IPSET_FLAG_BIT_BEFORE),
+	IPSET_FLAG_BIT_PHYSDEV	= 1,
+	IPSET_FLAG_PHYSDEV	= (1 << IPSET_FLAG_BIT_PHYSDEV),
+	IPSET_FLAG_BIT_NOMATCH	= 2,
+	IPSET_FLAG_NOMATCH	= (1 << IPSET_FLAG_BIT_NOMATCH),
+	IPSET_FLAG_CADT_MAX	= 15,	/* Upper half */
+};
+
+/* Commands with settype-specific attributes */
+enum ipset_adt {
+	IPSET_ADD,
+	IPSET_DEL,
+	IPSET_TEST,
+	IPSET_ADT_MAX,
+	IPSET_CREATE = IPSET_ADT_MAX,
+	IPSET_CADT_MAX,
+};
+
+/* Sets are identified by an index in kernel space. Tweak with ip_set_id_t
+ * and IPSET_INVALID_ID if you want to increase the max number of sets.
+ */
+typedef __u16 ip_set_id_t;
+
+#define IPSET_INVALID_ID		65535
+
+enum ip_set_dim {
+	IPSET_DIM_ZERO = 0,
+	IPSET_DIM_ONE,
+	IPSET_DIM_TWO,
+	IPSET_DIM_THREE,
+	/* Max dimension in elements.
+	 * If changed, new revision of iptables match/target is required.
+	 */
+	IPSET_DIM_MAX = 6,
+};
+
+/* Option flags for kernel operations */
+enum ip_set_kopt {
+	IPSET_INV_MATCH = (1 << IPSET_DIM_ZERO),
+	IPSET_DIM_ONE_SRC = (1 << IPSET_DIM_ONE),
+	IPSET_DIM_TWO_SRC = (1 << IPSET_DIM_TWO),
+	IPSET_DIM_THREE_SRC = (1 << IPSET_DIM_THREE),
+};
+
+#ifdef __KERNEL__
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <linux/netlink.h>
+#include <linux/netfilter.h>
+#include <linux/netfilter/x_tables.h>
+#include <linux/vmalloc.h>
+#include <net/netlink.h>
+
+/* Set features */
+enum ip_set_feature {
+	IPSET_TYPE_IP_FLAG = 0,
+	IPSET_TYPE_IP = (1 << IPSET_TYPE_IP_FLAG),
+	IPSET_TYPE_PORT_FLAG = 1,
+	IPSET_TYPE_PORT = (1 << IPSET_TYPE_PORT_FLAG),
+	IPSET_TYPE_MAC_FLAG = 2,
+	IPSET_TYPE_MAC = (1 << IPSET_TYPE_MAC_FLAG),
+	IPSET_TYPE_IP2_FLAG = 3,
+	IPSET_TYPE_IP2 = (1 << IPSET_TYPE_IP2_FLAG),
+	IPSET_TYPE_NAME_FLAG = 4,
+	IPSET_TYPE_NAME = (1 << IPSET_TYPE_NAME_FLAG),
+	IPSET_TYPE_IFACE_FLAG = 5,
+	IPSET_TYPE_IFACE = (1 << IPSET_TYPE_IFACE_FLAG),
+	/* Strictly speaking not a feature, but a flag for dumping:
+	 * this settype must be dumped last */
+	IPSET_DUMP_LAST_FLAG = 7,
+	IPSET_DUMP_LAST = (1 << IPSET_DUMP_LAST_FLAG),
+};
+
+struct ip_set;
+
+typedef int (*ipset_adtfn)(struct ip_set *set, void *value,
+			   u32 timeout, u32 flags);
+
+/* Kernel API function options */
+struct ip_set_adt_opt {
+	u8 family;		/* Actual protocol family */
+	u8 dim;			/* Dimension of match/target */
+	u8 flags;		/* Direction and negation flags */
+	u32 cmdflags;		/* Command-like flags */
+	u32 timeout;		/* Timeout value */
+};
+
+/* Set type, variant-specific part */
+struct ip_set_type_variant {
+	/* Kernelspace: test/add/del entries
+	 *		returns negative error code,
+	 *			zero for no match/success to add/delete
+	 *			positive for matching element */
+	int (*kadt)(struct ip_set *set, const struct sk_buff * skb,
+		    const struct xt_action_param *par,
+		    enum ipset_adt adt, const struct ip_set_adt_opt *opt);
+
+	/* Userspace: test/add/del entries
+	 *		returns negative error code,
+	 *			zero for no match/success to add/delete
+	 *			positive for matching element */
+	int (*uadt)(struct ip_set *set, struct nlattr *tb[],
+		    enum ipset_adt adt, u32 *lineno, u32 flags, bool retried);
+
+	/* Low level add/del/test functions */
+	ipset_adtfn adt[IPSET_ADT_MAX];
+
+	/* When adding entries and set is full, try to resize the set */
+	int (*resize)(struct ip_set *set, bool retried);
+	/* Destroy the set */
+	void (*destroy)(struct ip_set *set);
+	/* Flush the elements */
+	void (*flush)(struct ip_set *set);
+	/* Expire entries before listing */
+	void (*expire)(struct ip_set *set);
+	/* List set header data */
+	int (*head)(struct ip_set *set, struct sk_buff *skb);
+	/* List elements */
+	int (*list)(const struct ip_set *set, struct sk_buff *skb,
+		    struct netlink_callback *cb);
+
+	/* Return true if "b" set is the same as "a"
+	 * according to the create set parameters */
+	bool (*same_set)(const struct ip_set *a, const struct ip_set *b);
+};
+
+/* The core set type structure */
+struct ip_set_type {
+	struct list_head list;
+
+	/* Typename */
+	char name[IPSET_MAXNAMELEN];
+	/* Protocol version */
+	u8 protocol;
+	/* Set features to control swapping */
+	u8 features;
+	/* Set type dimension */
+	u8 dimension;
+	/*
+	 * Supported family: may be NFPROTO_UNSPEC for both
+	 * NFPROTO_IPV4/NFPROTO_IPV6.
+	 */
+	u8 family;
+	/* Type revisions */
+	u8 revision_min, revision_max;
+
+	/* Create set */
+	int (*create)(struct ip_set *set, struct nlattr *tb[], u32 flags);
+
+	/* Attribute policies */
+	const struct nla_policy create_policy[IPSET_ATTR_CREATE_MAX + 1];
+	const struct nla_policy adt_policy[IPSET_ATTR_ADT_MAX + 1];
+
+	/* Set this to THIS_MODULE if you are a module, otherwise NULL */
+	struct module *me;
+};
+
+/* register and unregister set type */
+extern int ip_set_type_register(struct ip_set_type *set_type);
+extern void ip_set_type_unregister(struct ip_set_type *set_type);
+
+/* A generic IP set */
+struct ip_set {
+	/* The name of the set */
+	char name[IPSET_MAXNAMELEN];
+	/* Lock protecting the set data */
+	rwlock_t lock;
+	/* References to the set */
+	u32 ref;
+	/* The core set type */
+	struct ip_set_type *type;
+	/* The type variant doing the real job */
+	const struct ip_set_type_variant *variant;
+	/* The actual INET family of the set */
+	u8 family;
+	/* The type revision */
+	u8 revision;
+	/* The type specific data */
+	void *data;
+};
+
+/* register and unregister set references */
+extern ip_set_id_t ip_set_get_byname(const char *name, struct ip_set **set);
+extern void ip_set_put_byindex(ip_set_id_t index);
+extern const char *ip_set_name_byindex(ip_set_id_t index);
+extern ip_set_id_t ip_set_nfnl_get(const char *name);
+extern ip_set_id_t ip_set_nfnl_get_byindex(ip_set_id_t index);
+extern void ip_set_nfnl_put(ip_set_id_t index);
+
+/* API for iptables set match, and SET target */
+
+extern int ip_set_add(ip_set_id_t id, const struct sk_buff *skb,
+		      const struct xt_action_param *par,
+		      const struct ip_set_adt_opt *opt);
+extern int ip_set_del(ip_set_id_t id, const struct sk_buff *skb,
+		      const struct xt_action_param *par,
+		      const struct ip_set_adt_opt *opt);
+extern int ip_set_test(ip_set_id_t id, const struct sk_buff *skb,
+		       const struct xt_action_param *par,
+		       const struct ip_set_adt_opt *opt);
+
+/* Utility functions */
+extern void *ip_set_alloc(size_t size);
+extern void ip_set_free(void *members);
+extern int ip_set_get_ipaddr4(struct nlattr *nla,  __be32 *ipaddr);
+extern int ip_set_get_ipaddr6(struct nlattr *nla, union nf_inet_addr *ipaddr);
+
+static inline int
+ip_set_get_hostipaddr4(struct nlattr *nla, u32 *ipaddr)
+{
+	__be32 ip;
+	int ret = ip_set_get_ipaddr4(nla, &ip);
+
+	if (ret)
+		return ret;
+	*ipaddr = ntohl(ip);
+	return 0;
+}
+
+/* Ignore IPSET_ERR_EXIST errors if asked to do so? */
+static inline bool
+ip_set_eexist(int ret, u32 flags)
+{
+	return ret == -IPSET_ERR_EXIST && (flags & IPSET_FLAG_EXIST);
+}
+
+/* Check the NLA_F_NET_BYTEORDER flag */
+static inline bool
+ip_set_attr_netorder(struct nlattr *tb[], int type)
+{
+	return tb[type] && (tb[type]->nla_type & NLA_F_NET_BYTEORDER);
+}
+
+static inline bool
+ip_set_optattr_netorder(struct nlattr *tb[], int type)
+{
+	return !tb[type] || (tb[type]->nla_type & NLA_F_NET_BYTEORDER);
+}
+
+/* Useful converters */
+static inline u32
+ip_set_get_h32(const struct nlattr *attr)
+{
+	return ntohl(nla_get_be32(attr));
+}
+
+static inline u16
+ip_set_get_h16(const struct nlattr *attr)
+{
+	return ntohs(nla_get_be16(attr));
+}
+
+#define ipset_nest_start(skb, attr) nla_nest_start(skb, attr | NLA_F_NESTED)
+#define ipset_nest_end(skb, start)  nla_nest_end(skb, start)
+
+#define NLA_PUT_IPADDR4(skb, type, ipaddr)			\
+do {								\
+	struct nlattr *__nested = ipset_nest_start(skb, type);	\
+								\
+	if (!__nested)						\
+		goto nla_put_failure;				\
+	NLA_PUT_NET32(skb, IPSET_ATTR_IPADDR_IPV4, ipaddr);	\
+	ipset_nest_end(skb, __nested);				\
+} while (0)
+
+#define NLA_PUT_IPADDR6(skb, type, ipaddrptr)			\
+do {								\
+	struct nlattr *__nested = ipset_nest_start(skb, type);	\
+								\
+	if (!__nested)						\
+		goto nla_put_failure;				\
+	NLA_PUT(skb, IPSET_ATTR_IPADDR_IPV6,			\
+		sizeof(struct in6_addr), ipaddrptr);		\
+	ipset_nest_end(skb, __nested);				\
+} while (0)
+
+/* Get address from skbuff */
+static inline __be32
+ip4addr(const struct sk_buff *skb, bool src)
+{
+	return src ? ip_hdr(skb)->saddr : ip_hdr(skb)->daddr;
+}
+
+static inline void
+ip4addrptr(const struct sk_buff *skb, bool src, __be32 *addr)
+{
+	*addr = src ? ip_hdr(skb)->saddr : ip_hdr(skb)->daddr;
+}
+
+static inline void
+ip6addrptr(const struct sk_buff *skb, bool src, struct in6_addr *addr)
+{
+	memcpy(addr, src ? &ipv6_hdr(skb)->saddr : &ipv6_hdr(skb)->daddr,
+	       sizeof(*addr));
+}
+
+/* Calculate the bytes required to store the inclusive range of a-b */
+static inline int
+bitmap_bytes(u32 a, u32 b)
+{
+	return 4 * ((((b - a + 8) / 8) + 3) / 4);
+}
+
+#endif /* __KERNEL__ */
+
+/* Interface to iptables/ip6tables */
+
+#define SO_IP_SET		83
+
+union ip_set_name_index {
+	char name[IPSET_MAXNAMELEN];
+	ip_set_id_t index;
+};
+
+#define IP_SET_OP_GET_BYNAME	0x00000006	/* Get set index by name */
+struct ip_set_req_get_set {
+	unsigned op;
+	unsigned version;
+	union ip_set_name_index set;
+};
+
+#define IP_SET_OP_GET_BYINDEX	0x00000007	/* Get set name by index */
+/* Uses ip_set_req_get_set */
+
+#define IP_SET_OP_VERSION	0x00000100	/* Ask kernel version */
+struct ip_set_req_version {
+	unsigned op;
+	unsigned version;
+};
+
+#endif /*_IP_SET_H */
diff --git a/include/linux/netfilter/ipset/ip_set_ahash.h b/include/linux/netfilter/ipset/ip_set_ahash.h
new file mode 100644
index 00000000..230a290e
--- /dev/null
+++ b/include/linux/netfilter/ipset/ip_set_ahash.h
@@ -0,0 +1,1214 @@
+#ifndef _IP_SET_AHASH_H
+#define _IP_SET_AHASH_H
+
+#include <linux/rcupdate.h>
+#include <linux/jhash.h>
+#include <linux/netfilter/ipset/ip_set_timeout.h>
+
+#define CONCAT(a, b, c)		a##b##c
+#define TOKEN(a, b, c)		CONCAT(a, b, c)
+
+#define type_pf_next		TOKEN(TYPE, PF, _elem)
+
+/* Hashing which uses arrays to resolve clashing. The hash table is resized
+ * (doubled) when searching becomes too long.
+ * Internally jhash is used with the assumption that the size of the
+ * stored data is a multiple of sizeof(u32). If storage supports timeout,
+ * the timeout field must be the last one in the data structure - that field
+ * is ignored when computing the hash key.
+ *
+ * Readers and resizing
+ *
+ * Resizing can be triggered by userspace command only, and those
+ * are serialized by the nfnl mutex. During resizing the set is
+ * read-locked, so the only possible concurrent operations are
+ * the kernel side readers. Those must be protected by proper RCU locking.
+ */
+
+/* Number of elements to store in an initial array block */
+#define AHASH_INIT_SIZE			4
+/* Max number of elements to store in an array block */
+#define AHASH_MAX_SIZE			(3*AHASH_INIT_SIZE)
+
+/* Max number of elements can be tuned */
+#ifdef IP_SET_HASH_WITH_MULTI
+#define AHASH_MAX(h)			((h)->ahash_max)
+
+static inline u8
+tune_ahash_max(u8 curr, u32 multi)
+{
+	u32 n;
+
+	if (multi < curr)
+		return curr;
+
+	n = curr + AHASH_INIT_SIZE;
+	/* Currently, at listing one hash bucket must fit into a message.
+	 * Therefore we have a hard limit here.
+	 */
+	return n > curr && n <= 64 ? n : curr;
+}
+#define TUNE_AHASH_MAX(h, multi)	\
+	((h)->ahash_max = tune_ahash_max((h)->ahash_max, multi))
+#else
+#define AHASH_MAX(h)			AHASH_MAX_SIZE
+#define TUNE_AHASH_MAX(h, multi)
+#endif
+
+/* A hash bucket */
+struct hbucket {
+	void *value;		/* the array of the values */
+	u8 size;		/* size of the array */
+	u8 pos;			/* position of the first free entry */
+};
+
+/* The hash table: the table size stored here in order to make resizing easy */
+struct htable {
+	u8 htable_bits;		/* size of hash table == 2^htable_bits */
+	struct hbucket bucket[0]; /* hashtable buckets */
+};
+
+#define hbucket(h, i)		(&((h)->bucket[i]))
+
+/* Book-keeping of the prefixes added to the set */
+struct ip_set_hash_nets {
+	u8 cidr;		/* the different cidr values in the set */
+	u32 nets;		/* number of elements per cidr */
+};
+
+/* The generic ip_set hash structure */
+struct ip_set_hash {
+	struct htable *table;	/* the hash table */
+	u32 maxelem;		/* max elements in the hash */
+	u32 elements;		/* current element (vs timeout) */
+	u32 initval;		/* random jhash init value */
+	u32 timeout;		/* timeout value, if enabled */
+	struct timer_list gc;	/* garbage collection when timeout enabled */
+	struct type_pf_next next; /* temporary storage for uadd */
+#ifdef IP_SET_HASH_WITH_MULTI
+	u8 ahash_max;		/* max elements in an array block */
+#endif
+#ifdef IP_SET_HASH_WITH_NETMASK
+	u8 netmask;		/* netmask value for subnets to store */
+#endif
+#ifdef IP_SET_HASH_WITH_RBTREE
+	struct rb_root rbtree;
+#endif
+#ifdef IP_SET_HASH_WITH_NETS
+	struct ip_set_hash_nets nets[0]; /* book-keeping of prefixes */
+#endif
+};
+
+static size_t
+htable_size(u8 hbits)
+{
+	size_t hsize;
+
+	/* We must fit both into u32 in jhash and size_t */
+	if (hbits > 31)
+		return 0;
+	hsize = jhash_size(hbits);
+	if ((((size_t)-1) - sizeof(struct htable))/sizeof(struct hbucket)
+	    < hsize)
+		return 0;
+
+	return hsize * sizeof(struct hbucket) + sizeof(struct htable);
+}
+
+/* Compute htable_bits from the user input parameter hashsize */
+static u8
+htable_bits(u32 hashsize)
+{
+	/* Assume that hashsize == 2^htable_bits */
+	u8 bits = fls(hashsize - 1);
+	if (jhash_size(bits) != hashsize)
+		/* Round up to the first 2^n value */
+		bits = fls(hashsize);
+
+	return bits;
+}
+
+#ifdef IP_SET_HASH_WITH_NETS
+#ifdef IP_SET_HASH_WITH_NETS_PACKED
+/* When cidr is packed with nomatch, cidr - 1 is stored in the entry */
+#define CIDR(cidr)	(cidr + 1)
+#else
+#define CIDR(cidr)	(cidr)
+#endif
+
+#define SET_HOST_MASK(family)	(family == AF_INET ? 32 : 128)
+
+/* Network cidr size book keeping when the hash stores different
+ * sized networks */
+static void
+add_cidr(struct ip_set_hash *h, u8 cidr, u8 host_mask)
+{
+	u8 i;
+
+	++h->nets[cidr-1].nets;
+
+	pr_debug("add_cidr added %u: %u\n", cidr, h->nets[cidr-1].nets);
+
+	if (h->nets[cidr-1].nets > 1)
+		return;
+
+	/* New cidr size */
+	for (i = 0; i < host_mask && h->nets[i].cidr; i++) {
+		/* Add in increasing prefix order, so larger cidr first */
+		if (h->nets[i].cidr < cidr)
+			swap(h->nets[i].cidr, cidr);
+	}
+	if (i < host_mask)
+		h->nets[i].cidr = cidr;
+}
+
+static void
+del_cidr(struct ip_set_hash *h, u8 cidr, u8 host_mask)
+{
+	u8 i;
+
+	--h->nets[cidr-1].nets;
+
+	pr_debug("del_cidr deleted %u: %u\n", cidr, h->nets[cidr-1].nets);
+
+	if (h->nets[cidr-1].nets != 0)
+		return;
+
+	/* All entries with this cidr size deleted, so cleanup h->cidr[] */
+	for (i = 0; i < host_mask - 1 && h->nets[i].cidr; i++) {
+		if (h->nets[i].cidr == cidr)
+			h->nets[i].cidr = cidr = h->nets[i+1].cidr;
+	}
+	h->nets[i - 1].cidr = 0;
+}
+#endif
+
+/* Destroy the hashtable part of the set */
+static void
+ahash_destroy(struct htable *t)
+{
+	struct hbucket *n;
+	u32 i;
+
+	for (i = 0; i < jhash_size(t->htable_bits); i++) {
+		n = hbucket(t, i);
+		if (n->size)
+			/* FIXME: use slab cache */
+			kfree(n->value);
+	}
+
+	ip_set_free(t);
+}
+
+/* Calculate the actual memory size of the set data */
+static size_t
+ahash_memsize(const struct ip_set_hash *h, size_t dsize, u8 host_mask)
+{
+	u32 i;
+	struct htable *t = h->table;
+	size_t memsize = sizeof(*h)
+			 + sizeof(*t)
+#ifdef IP_SET_HASH_WITH_NETS
+			 + sizeof(struct ip_set_hash_nets) * host_mask
+#endif
+			 + jhash_size(t->htable_bits) * sizeof(struct hbucket);
+
+	for (i = 0; i < jhash_size(t->htable_bits); i++)
+			memsize += t->bucket[i].size * dsize;
+
+	return memsize;
+}
+
+/* Flush a hash type of set: destroy all elements */
+static void
+ip_set_hash_flush(struct ip_set *set)
+{
+	struct ip_set_hash *h = set->data;
+	struct htable *t = h->table;
+	struct hbucket *n;
+	u32 i;
+
+	for (i = 0; i < jhash_size(t->htable_bits); i++) {
+		n = hbucket(t, i);
+		if (n->size) {
+			n->size = n->pos = 0;
+			/* FIXME: use slab cache */
+			kfree(n->value);
+		}
+	}
+#ifdef IP_SET_HASH_WITH_NETS
+	memset(h->nets, 0, sizeof(struct ip_set_hash_nets)
+			   * SET_HOST_MASK(set->family));
+#endif
+	h->elements = 0;
+}
+
+/* Destroy a hash type of set */
+static void
+ip_set_hash_destroy(struct ip_set *set)
+{
+	struct ip_set_hash *h = set->data;
+
+	if (with_timeout(h->timeout))
+		del_timer_sync(&h->gc);
+
+	ahash_destroy(h->table);
+#ifdef IP_SET_HASH_WITH_RBTREE
+	rbtree_destroy(&h->rbtree);
+#endif
+	kfree(h);
+
+	set->data = NULL;
+}
+
+#endif /* _IP_SET_AHASH_H */
+
+#ifndef HKEY_DATALEN
+#define HKEY_DATALEN	sizeof(struct type_pf_elem)
+#endif
+
+#define HKEY(data, initval, htable_bits)			\
+(jhash2((u32 *)(data), HKEY_DATALEN/sizeof(u32), initval)	\
+	& jhash_mask(htable_bits))
+
+#define CONCAT(a, b, c)		a##b##c
+#define TOKEN(a, b, c)		CONCAT(a, b, c)
+
+/* Type/family dependent function prototypes */
+
+#define type_pf_data_equal	TOKEN(TYPE, PF, _data_equal)
+#define type_pf_data_isnull	TOKEN(TYPE, PF, _data_isnull)
+#define type_pf_data_copy	TOKEN(TYPE, PF, _data_copy)
+#define type_pf_data_zero_out	TOKEN(TYPE, PF, _data_zero_out)
+#define type_pf_data_netmask	TOKEN(TYPE, PF, _data_netmask)
+#define type_pf_data_list	TOKEN(TYPE, PF, _data_list)
+#define type_pf_data_tlist	TOKEN(TYPE, PF, _data_tlist)
+#define type_pf_data_next	TOKEN(TYPE, PF, _data_next)
+#define type_pf_data_flags	TOKEN(TYPE, PF, _data_flags)
+#ifdef IP_SET_HASH_WITH_NETS
+#define type_pf_data_match	TOKEN(TYPE, PF, _data_match)
+#else
+#define type_pf_data_match(d)	1
+#endif
+
+#define type_pf_elem		TOKEN(TYPE, PF, _elem)
+#define type_pf_telem		TOKEN(TYPE, PF, _telem)
+#define type_pf_data_timeout	TOKEN(TYPE, PF, _data_timeout)
+#define type_pf_data_expired	TOKEN(TYPE, PF, _data_expired)
+#define type_pf_data_timeout_set TOKEN(TYPE, PF, _data_timeout_set)
+
+#define type_pf_elem_add	TOKEN(TYPE, PF, _elem_add)
+#define type_pf_add		TOKEN(TYPE, PF, _add)
+#define type_pf_del		TOKEN(TYPE, PF, _del)
+#define type_pf_test_cidrs	TOKEN(TYPE, PF, _test_cidrs)
+#define type_pf_test		TOKEN(TYPE, PF, _test)
+
+#define type_pf_elem_tadd	TOKEN(TYPE, PF, _elem_tadd)
+#define type_pf_del_telem	TOKEN(TYPE, PF, _ahash_del_telem)
+#define type_pf_expire		TOKEN(TYPE, PF, _expire)
+#define type_pf_tadd		TOKEN(TYPE, PF, _tadd)
+#define type_pf_tdel		TOKEN(TYPE, PF, _tdel)
+#define type_pf_ttest_cidrs	TOKEN(TYPE, PF, _ahash_ttest_cidrs)
+#define type_pf_ttest		TOKEN(TYPE, PF, _ahash_ttest)
+
+#define type_pf_resize		TOKEN(TYPE, PF, _resize)
+#define type_pf_tresize		TOKEN(TYPE, PF, _tresize)
+#define type_pf_flush		ip_set_hash_flush
+#define type_pf_destroy		ip_set_hash_destroy
+#define type_pf_head		TOKEN(TYPE, PF, _head)
+#define type_pf_list		TOKEN(TYPE, PF, _list)
+#define type_pf_tlist		TOKEN(TYPE, PF, _tlist)
+#define type_pf_same_set	TOKEN(TYPE, PF, _same_set)
+#define type_pf_kadt		TOKEN(TYPE, PF, _kadt)
+#define type_pf_uadt		TOKEN(TYPE, PF, _uadt)
+#define type_pf_gc		TOKEN(TYPE, PF, _gc)
+#define type_pf_gc_init		TOKEN(TYPE, PF, _gc_init)
+#define type_pf_variant		TOKEN(TYPE, PF, _variant)
+#define type_pf_tvariant	TOKEN(TYPE, PF, _tvariant)
+
+/* Flavour without timeout */
+
+/* Get the ith element from the array block n */
+#define ahash_data(n, i)	\
+	((struct type_pf_elem *)((n)->value) + (i))
+
+/* Add an element to the hash table when resizing the set:
+ * we spare the maintenance of the internal counters. */
+static int
+type_pf_elem_add(struct hbucket *n, const struct type_pf_elem *value,
+		 u8 ahash_max, u32 cadt_flags)
+{
+	struct type_pf_elem *data;
+
+	if (n->pos >= n->size) {
+		void *tmp;
+
+		if (n->size >= ahash_max)
+			/* Trigger rehashing */
+			return -EAGAIN;
+
+		tmp = kzalloc((n->size + AHASH_INIT_SIZE)
+			      * sizeof(struct type_pf_elem),
+			      GFP_ATOMIC);
+		if (!tmp)
+			return -ENOMEM;
+		if (n->size) {
+			memcpy(tmp, n->value,
+			       sizeof(struct type_pf_elem) * n->size);
+			kfree(n->value);
+		}
+		n->value = tmp;
+		n->size += AHASH_INIT_SIZE;
+	}
+	data = ahash_data(n, n->pos++);
+	type_pf_data_copy(data, value);
+#ifdef IP_SET_HASH_WITH_NETS
+	/* Resizing won't overwrite stored flags */
+	if (cadt_flags)
+		type_pf_data_flags(data, cadt_flags);
+#endif
+	return 0;
+}
+
+/* Resize a hash: create a new hash table with doubling the hashsize
+ * and inserting the elements to it. Repeat until we succeed or
+ * fail due to memory pressures. */
+static int
+type_pf_resize(struct ip_set *set, bool retried)
+{
+	struct ip_set_hash *h = set->data;
+	struct htable *t, *orig = h->table;
+	u8 htable_bits = orig->htable_bits;
+	const struct type_pf_elem *data;
+	struct hbucket *n, *m;
+	u32 i, j;
+	int ret;
+
+retry:
+	ret = 0;
+	htable_bits++;
+	pr_debug("attempt to resize set %s from %u to %u, t %p\n",
+		 set->name, orig->htable_bits, htable_bits, orig);
+	if (!htable_bits) {
+		/* In case we have plenty of memory :-) */
+		pr_warning("Cannot increase the hashsize of set %s further\n",
+			   set->name);
+		return -IPSET_ERR_HASH_FULL;
+	}
+	t = ip_set_alloc(sizeof(*t)
+			 + jhash_size(htable_bits) * sizeof(struct hbucket));
+	if (!t)
+		return -ENOMEM;
+	t->htable_bits = htable_bits;
+
+	read_lock_bh(&set->lock);
+	for (i = 0; i < jhash_size(orig->htable_bits); i++) {
+		n = hbucket(orig, i);
+		for (j = 0; j < n->pos; j++) {
+			data = ahash_data(n, j);
+			m = hbucket(t, HKEY(data, h->initval, htable_bits));
+			ret = type_pf_elem_add(m, data, AHASH_MAX(h), 0);
+			if (ret < 0) {
+				read_unlock_bh(&set->lock);
+				ahash_destroy(t);
+				if (ret == -EAGAIN)
+					goto retry;
+				return ret;
+			}
+		}
+	}
+
+	rcu_assign_pointer(h->table, t);
+	read_unlock_bh(&set->lock);
+
+	/* Give time to other readers of the set */
+	synchronize_rcu_bh();
+
+	pr_debug("set %s resized from %u (%p) to %u (%p)\n", set->name,
+		 orig->htable_bits, orig, t->htable_bits, t);
+	ahash_destroy(orig);
+
+	return 0;
+}
+
+static inline void
+type_pf_data_next(struct ip_set_hash *h, const struct type_pf_elem *d);
+
+/* Add an element to a hash and update the internal counters when succeeded,
+ * otherwise report the proper error code. */
+static int
+type_pf_add(struct ip_set *set, void *value, u32 timeout, u32 flags)
+{
+	struct ip_set_hash *h = set->data;
+	struct htable *t;
+	const struct type_pf_elem *d = value;
+	struct hbucket *n;
+	int i, ret = 0;
+	u32 key, multi = 0;
+	u32 cadt_flags = flags >> 16;
+
+	if (h->elements >= h->maxelem) {
+		if (net_ratelimit())
+			pr_warning("Set %s is full, maxelem %u reached\n",
+				   set->name, h->maxelem);
+		return -IPSET_ERR_HASH_FULL;
+	}
+
+	rcu_read_lock_bh();
+	t = rcu_dereference_bh(h->table);
+	key = HKEY(value, h->initval, t->htable_bits);
+	n = hbucket(t, key);
+	for (i = 0; i < n->pos; i++)
+		if (type_pf_data_equal(ahash_data(n, i), d, &multi)) {
+#ifdef IP_SET_HASH_WITH_NETS
+			if (flags & IPSET_FLAG_EXIST)
+				/* Support overwriting just the flags */
+				type_pf_data_flags(ahash_data(n, i),
+						   cadt_flags);
+#endif
+			ret = -IPSET_ERR_EXIST;
+			goto out;
+		}
+	TUNE_AHASH_MAX(h, multi);
+	ret = type_pf_elem_add(n, value, AHASH_MAX(h), cadt_flags);
+	if (ret != 0) {
+		if (ret == -EAGAIN)
+			type_pf_data_next(h, d);
+		goto out;
+	}
+
+#ifdef IP_SET_HASH_WITH_NETS
+	add_cidr(h, CIDR(d->cidr), HOST_MASK);
+#endif
+	h->elements++;
+out:
+	rcu_read_unlock_bh();
+	return ret;
+}
+
+/* Delete an element from the hash: swap it with the last element
+ * and free up space if possible.
+ */
+static int
+type_pf_del(struct ip_set *set, void *value, u32 timeout, u32 flags)
+{
+	struct ip_set_hash *h = set->data;
+	struct htable *t = h->table;
+	const struct type_pf_elem *d = value;
+	struct hbucket *n;
+	int i;
+	struct type_pf_elem *data;
+	u32 key, multi = 0;
+
+	key = HKEY(value, h->initval, t->htable_bits);
+	n = hbucket(t, key);
+	for (i = 0; i < n->pos; i++) {
+		data = ahash_data(n, i);
+		if (!type_pf_data_equal(data, d, &multi))
+			continue;
+		if (i != n->pos - 1)
+			/* Not last one */
+			type_pf_data_copy(data, ahash_data(n, n->pos - 1));
+
+		n->pos--;
+		h->elements--;
+#ifdef IP_SET_HASH_WITH_NETS
+		del_cidr(h, CIDR(d->cidr), HOST_MASK);
+#endif
+		if (n->pos + AHASH_INIT_SIZE < n->size) {
+			void *tmp = kzalloc((n->size - AHASH_INIT_SIZE)
+					    * sizeof(struct type_pf_elem),
+					    GFP_ATOMIC);
+			if (!tmp)
+				return 0;
+			n->size -= AHASH_INIT_SIZE;
+			memcpy(tmp, n->value,
+			       n->size * sizeof(struct type_pf_elem));
+			kfree(n->value);
+			n->value = tmp;
+		}
+		return 0;
+	}
+
+	return -IPSET_ERR_EXIST;
+}
+
+#ifdef IP_SET_HASH_WITH_NETS
+
+/* Special test function which takes into account the different network
+ * sizes added to the set */
+static int
+type_pf_test_cidrs(struct ip_set *set, struct type_pf_elem *d, u32 timeout)
+{
+	struct ip_set_hash *h = set->data;
+	struct htable *t = h->table;
+	struct hbucket *n;
+	const struct type_pf_elem *data;
+	int i, j = 0;
+	u32 key, multi = 0;
+	u8 host_mask = SET_HOST_MASK(set->family);
+
+	pr_debug("test by nets\n");
+	for (; j < host_mask && h->nets[j].cidr && !multi; j++) {
+		type_pf_data_netmask(d, h->nets[j].cidr);
+		key = HKEY(d, h->initval, t->htable_bits);
+		n = hbucket(t, key);
+		for (i = 0; i < n->pos; i++) {
+			data = ahash_data(n, i);
+			if (type_pf_data_equal(data, d, &multi))
+				return type_pf_data_match(data);
+		}
+	}
+	return 0;
+}
+#endif
+
+/* Test whether the element is added to the set */
+static int
+type_pf_test(struct ip_set *set, void *value, u32 timeout, u32 flags)
+{
+	struct ip_set_hash *h = set->data;
+	struct htable *t = h->table;
+	struct type_pf_elem *d = value;
+	struct hbucket *n;
+	const struct type_pf_elem *data;
+	int i;
+	u32 key, multi = 0;
+
+#ifdef IP_SET_HASH_WITH_NETS
+	/* If we test an IP address and not a network address,
+	 * try all possible network sizes */
+	if (CIDR(d->cidr) == SET_HOST_MASK(set->family))
+		return type_pf_test_cidrs(set, d, timeout);
+#endif
+
+	key = HKEY(d, h->initval, t->htable_bits);
+	n = hbucket(t, key);
+	for (i = 0; i < n->pos; i++) {
+		data = ahash_data(n, i);
+		if (type_pf_data_equal(data, d, &multi))
+			return type_pf_data_match(data);
+	}
+	return 0;
+}
+
+/* Reply a HEADER request: fill out the header part of the set */
+static int
+type_pf_head(struct ip_set *set, struct sk_buff *skb)
+{
+	const struct ip_set_hash *h = set->data;
+	struct nlattr *nested;
+	size_t memsize;
+
+	read_lock_bh(&set->lock);
+	memsize = ahash_memsize(h, with_timeout(h->timeout)
+					? sizeof(struct type_pf_telem)
+					: sizeof(struct type_pf_elem),
+				set->family == AF_INET ? 32 : 128);
+	read_unlock_bh(&set->lock);
+
+	nested = ipset_nest_start(skb, IPSET_ATTR_DATA);
+	if (!nested)
+		goto nla_put_failure;
+	NLA_PUT_NET32(skb, IPSET_ATTR_HASHSIZE,
+		      htonl(jhash_size(h->table->htable_bits)));
+	NLA_PUT_NET32(skb, IPSET_ATTR_MAXELEM, htonl(h->maxelem));
+#ifdef IP_SET_HASH_WITH_NETMASK
+	if (h->netmask != HOST_MASK)
+		NLA_PUT_U8(skb, IPSET_ATTR_NETMASK, h->netmask);
+#endif
+	NLA_PUT_NET32(skb, IPSET_ATTR_REFERENCES, htonl(set->ref - 1));
+	NLA_PUT_NET32(skb, IPSET_ATTR_MEMSIZE, htonl(memsize));
+	if (with_timeout(h->timeout))
+		NLA_PUT_NET32(skb, IPSET_ATTR_TIMEOUT, htonl(h->timeout));
+	ipset_nest_end(skb, nested);
+
+	return 0;
+nla_put_failure:
+	return -EMSGSIZE;
+}
+
+/* Reply a LIST/SAVE request: dump the elements of the specified set */
+static int
+type_pf_list(const struct ip_set *set,
+	     struct sk_buff *skb, struct netlink_callback *cb)
+{
+	const struct ip_set_hash *h = set->data;
+	const struct htable *t = h->table;
+	struct nlattr *atd, *nested;
+	const struct hbucket *n;
+	const struct type_pf_elem *data;
+	u32 first = cb->args[2];
+	/* We assume that one hash bucket fills into one page */
+	void *incomplete;
+	int i;
+
+	atd = ipset_nest_start(skb, IPSET_ATTR_ADT);
+	if (!atd)
+		return -EMSGSIZE;
+	pr_debug("list hash set %s\n", set->name);
+	for (; cb->args[2] < jhash_size(t->htable_bits); cb->args[2]++) {
+		incomplete = skb_tail_pointer(skb);
+		n = hbucket(t, cb->args[2]);
+		pr_debug("cb->args[2]: %lu, t %p n %p\n", cb->args[2], t, n);
+		for (i = 0; i < n->pos; i++) {
+			data = ahash_data(n, i);
+			pr_debug("list hash %lu hbucket %p i %u, data %p\n",
+				 cb->args[2], n, i, data);
+			nested = ipset_nest_start(skb, IPSET_ATTR_DATA);
+			if (!nested) {
+				if (cb->args[2] == first) {
+					nla_nest_cancel(skb, atd);
+					return -EMSGSIZE;
+				} else
+					goto nla_put_failure;
+			}
+			if (type_pf_data_list(skb, data))
+				goto nla_put_failure;
+			ipset_nest_end(skb, nested);
+		}
+	}
+	ipset_nest_end(skb, atd);
+	/* Set listing finished */
+	cb->args[2] = 0;
+
+	return 0;
+
+nla_put_failure:
+	nlmsg_trim(skb, incomplete);
+	ipset_nest_end(skb, atd);
+	if (unlikely(first == cb->args[2])) {
+		pr_warning("Can't list set %s: one bucket does not fit into "
+			   "a message. Please report it!\n", set->name);
+		cb->args[2] = 0;
+		return -EMSGSIZE;
+	}
+	return 0;
+}
+
+static int
+type_pf_kadt(struct ip_set *set, const struct sk_buff * skb,
+	     const struct xt_action_param *par,
+	     enum ipset_adt adt, const struct ip_set_adt_opt *opt);
+static int
+type_pf_uadt(struct ip_set *set, struct nlattr *tb[],
+	     enum ipset_adt adt, u32 *lineno, u32 flags, bool retried);
+
+static const struct ip_set_type_variant type_pf_variant = {
+	.kadt	= type_pf_kadt,
+	.uadt	= type_pf_uadt,
+	.adt	= {
+		[IPSET_ADD] = type_pf_add,
+		[IPSET_DEL] = type_pf_del,
+		[IPSET_TEST] = type_pf_test,
+	},
+	.destroy = type_pf_destroy,
+	.flush	= type_pf_flush,
+	.head	= type_pf_head,
+	.list	= type_pf_list,
+	.resize	= type_pf_resize,
+	.same_set = type_pf_same_set,
+};
+
+/* Flavour with timeout support */
+
+#define ahash_tdata(n, i) \
+	(struct type_pf_elem *)((struct type_pf_telem *)((n)->value) + (i))
+
+static inline u32
+type_pf_data_timeout(const struct type_pf_elem *data)
+{
+	const struct type_pf_telem *tdata =
+		(const struct type_pf_telem *) data;
+
+	return tdata->timeout;
+}
+
+static inline bool
+type_pf_data_expired(const struct type_pf_elem *data)
+{
+	const struct type_pf_telem *tdata =
+		(const struct type_pf_telem *) data;
+
+	return ip_set_timeout_expired(tdata->timeout);
+}
+
+static inline void
+type_pf_data_timeout_set(struct type_pf_elem *data, u32 timeout)
+{
+	struct type_pf_telem *tdata = (struct type_pf_telem *) data;
+
+	tdata->timeout = ip_set_timeout_set(timeout);
+}
+
+static int
+type_pf_elem_tadd(struct hbucket *n, const struct type_pf_elem *value,
+		  u8 ahash_max, u32 cadt_flags, u32 timeout)
+{
+	struct type_pf_elem *data;
+
+	if (n->pos >= n->size) {
+		void *tmp;
+
+		if (n->size >= ahash_max)
+			/* Trigger rehashing */
+			return -EAGAIN;
+
+		tmp = kzalloc((n->size + AHASH_INIT_SIZE)
+			      * sizeof(struct type_pf_telem),
+			      GFP_ATOMIC);
+		if (!tmp)
+			return -ENOMEM;
+		if (n->size) {
+			memcpy(tmp, n->value,
+			       sizeof(struct type_pf_telem) * n->size);
+			kfree(n->value);
+		}
+		n->value = tmp;
+		n->size += AHASH_INIT_SIZE;
+	}
+	data = ahash_tdata(n, n->pos++);
+	type_pf_data_copy(data, value);
+	type_pf_data_timeout_set(data, timeout);
+#ifdef IP_SET_HASH_WITH_NETS
+	/* Resizing won't overwrite stored flags */
+	if (cadt_flags)
+		type_pf_data_flags(data, cadt_flags);
+#endif
+	return 0;
+}
+
+/* Delete expired elements from the hashtable */
+static void
+type_pf_expire(struct ip_set_hash *h)
+{
+	struct htable *t = h->table;
+	struct hbucket *n;
+	struct type_pf_elem *data;
+	u32 i;
+	int j;
+
+	for (i = 0; i < jhash_size(t->htable_bits); i++) {
+		n = hbucket(t, i);
+		for (j = 0; j < n->pos; j++) {
+			data = ahash_tdata(n, j);
+			if (type_pf_data_expired(data)) {
+				pr_debug("expired %u/%u\n", i, j);
+#ifdef IP_SET_HASH_WITH_NETS
+				del_cidr(h, CIDR(data->cidr), HOST_MASK);
+#endif
+				if (j != n->pos - 1)
+					/* Not last one */
+					type_pf_data_copy(data,
+						ahash_tdata(n, n->pos - 1));
+				n->pos--;
+				h->elements--;
+			}
+		}
+		if (n->pos + AHASH_INIT_SIZE < n->size) {
+			void *tmp = kzalloc((n->size - AHASH_INIT_SIZE)
+					    * sizeof(struct type_pf_telem),
+					    GFP_ATOMIC);
+			if (!tmp)
+				/* Still try to delete expired elements */
+				continue;
+			n->size -= AHASH_INIT_SIZE;
+			memcpy(tmp, n->value,
+			       n->size * sizeof(struct type_pf_telem));
+			kfree(n->value);
+			n->value = tmp;
+		}
+	}
+}
+
+static int
+type_pf_tresize(struct ip_set *set, bool retried)
+{
+	struct ip_set_hash *h = set->data;
+	struct htable *t, *orig = h->table;
+	u8 htable_bits = orig->htable_bits;
+	const struct type_pf_elem *data;
+	struct hbucket *n, *m;
+	u32 i, j;
+	int ret;
+
+	/* Try to cleanup once */
+	if (!retried) {
+		i = h->elements;
+		write_lock_bh(&set->lock);
+		type_pf_expire(set->data);
+		write_unlock_bh(&set->lock);
+		if (h->elements <  i)
+			return 0;
+	}
+
+retry:
+	ret = 0;
+	htable_bits++;
+	if (!htable_bits) {
+		/* In case we have plenty of memory :-) */
+		pr_warning("Cannot increase the hashsize of set %s further\n",
+			   set->name);
+		return -IPSET_ERR_HASH_FULL;
+	}
+	t = ip_set_alloc(sizeof(*t)
+			 + jhash_size(htable_bits) * sizeof(struct hbucket));
+	if (!t)
+		return -ENOMEM;
+	t->htable_bits = htable_bits;
+
+	read_lock_bh(&set->lock);
+	for (i = 0; i < jhash_size(orig->htable_bits); i++) {
+		n = hbucket(orig, i);
+		for (j = 0; j < n->pos; j++) {
+			data = ahash_tdata(n, j);
+			m = hbucket(t, HKEY(data, h->initval, htable_bits));
+			ret = type_pf_elem_tadd(m, data, AHASH_MAX(h), 0,
+						type_pf_data_timeout(data));
+			if (ret < 0) {
+				read_unlock_bh(&set->lock);
+				ahash_destroy(t);
+				if (ret == -EAGAIN)
+					goto retry;
+				return ret;
+			}
+		}
+	}
+
+	rcu_assign_pointer(h->table, t);
+	read_unlock_bh(&set->lock);
+
+	/* Give time to other readers of the set */
+	synchronize_rcu_bh();
+
+	ahash_destroy(orig);
+
+	return 0;
+}
+
+static int
+type_pf_tadd(struct ip_set *set, void *value, u32 timeout, u32 flags)
+{
+	struct ip_set_hash *h = set->data;
+	struct htable *t = h->table;
+	const struct type_pf_elem *d = value;
+	struct hbucket *n;
+	struct type_pf_elem *data;
+	int ret = 0, i, j = AHASH_MAX(h) + 1;
+	bool flag_exist = flags & IPSET_FLAG_EXIST;
+	u32 key, multi = 0;
+	u32 cadt_flags = flags >> 16;
+
+	if (h->elements >= h->maxelem)
+		/* FIXME: when set is full, we slow down here */
+		type_pf_expire(h);
+	if (h->elements >= h->maxelem) {
+		if (net_ratelimit())
+			pr_warning("Set %s is full, maxelem %u reached\n",
+				   set->name, h->maxelem);
+		return -IPSET_ERR_HASH_FULL;
+	}
+
+	rcu_read_lock_bh();
+	t = rcu_dereference_bh(h->table);
+	key = HKEY(d, h->initval, t->htable_bits);
+	n = hbucket(t, key);
+	for (i = 0; i < n->pos; i++) {
+		data = ahash_tdata(n, i);
+		if (type_pf_data_equal(data, d, &multi)) {
+			if (type_pf_data_expired(data) || flag_exist)
+				/* Just timeout value may be updated */
+				j = i;
+			else {
+				ret = -IPSET_ERR_EXIST;
+				goto out;
+			}
+		} else if (j == AHASH_MAX(h) + 1 &&
+			   type_pf_data_expired(data))
+			j = i;
+	}
+	if (j != AHASH_MAX(h) + 1) {
+		data = ahash_tdata(n, j);
+#ifdef IP_SET_HASH_WITH_NETS
+		del_cidr(h, CIDR(data->cidr), HOST_MASK);
+		add_cidr(h, CIDR(d->cidr), HOST_MASK);
+#endif
+		type_pf_data_copy(data, d);
+		type_pf_data_timeout_set(data, timeout);
+#ifdef IP_SET_HASH_WITH_NETS
+		type_pf_data_flags(data, cadt_flags);
+#endif
+		goto out;
+	}
+	TUNE_AHASH_MAX(h, multi);
+	ret = type_pf_elem_tadd(n, d, AHASH_MAX(h), cadt_flags, timeout);
+	if (ret != 0) {
+		if (ret == -EAGAIN)
+			type_pf_data_next(h, d);
+		goto out;
+	}
+
+#ifdef IP_SET_HASH_WITH_NETS
+	add_cidr(h, CIDR(d->cidr), HOST_MASK);
+#endif
+	h->elements++;
+out:
+	rcu_read_unlock_bh();
+	return ret;
+}
+
+static int
+type_pf_tdel(struct ip_set *set, void *value, u32 timeout, u32 flags)
+{
+	struct ip_set_hash *h = set->data;
+	struct htable *t = h->table;
+	const struct type_pf_elem *d = value;
+	struct hbucket *n;
+	int i;
+	struct type_pf_elem *data;
+	u32 key, multi = 0;
+
+	key = HKEY(value, h->initval, t->htable_bits);
+	n = hbucket(t, key);
+	for (i = 0; i < n->pos; i++) {
+		data = ahash_tdata(n, i);
+		if (!type_pf_data_equal(data, d, &multi))
+			continue;
+		if (type_pf_data_expired(data))
+			return -IPSET_ERR_EXIST;
+		if (i != n->pos - 1)
+			/* Not last one */
+			type_pf_data_copy(data, ahash_tdata(n, n->pos - 1));
+
+		n->pos--;
+		h->elements--;
+#ifdef IP_SET_HASH_WITH_NETS
+		del_cidr(h, CIDR(d->cidr), HOST_MASK);
+#endif
+		if (n->pos + AHASH_INIT_SIZE < n->size) {
+			void *tmp = kzalloc((n->size - AHASH_INIT_SIZE)
+					    * sizeof(struct type_pf_telem),
+					    GFP_ATOMIC);
+			if (!tmp)
+				return 0;
+			n->size -= AHASH_INIT_SIZE;
+			memcpy(tmp, n->value,
+			       n->size * sizeof(struct type_pf_telem));
+			kfree(n->value);
+			n->value = tmp;
+		}
+		return 0;
+	}
+
+	return -IPSET_ERR_EXIST;
+}
+
+#ifdef IP_SET_HASH_WITH_NETS
+static int
+type_pf_ttest_cidrs(struct ip_set *set, struct type_pf_elem *d, u32 timeout)
+{
+	struct ip_set_hash *h = set->data;
+	struct htable *t = h->table;
+	struct type_pf_elem *data;
+	struct hbucket *n;
+	int i, j = 0;
+	u32 key, multi = 0;
+	u8 host_mask = SET_HOST_MASK(set->family);
+
+	for (; j < host_mask && h->nets[j].cidr && !multi; j++) {
+		type_pf_data_netmask(d, h->nets[j].cidr);
+		key = HKEY(d, h->initval, t->htable_bits);
+		n = hbucket(t, key);
+		for (i = 0; i < n->pos; i++) {
+			data = ahash_tdata(n, i);
+#ifdef IP_SET_HASH_WITH_MULTI
+			if (type_pf_data_equal(data, d, &multi)) {
+				if (!type_pf_data_expired(data))
+					return type_pf_data_match(data);
+				multi = 0;
+			}
+#else
+			if (type_pf_data_equal(data, d, &multi) &&
+			    !type_pf_data_expired(data))
+				return type_pf_data_match(data);
+#endif
+		}
+	}
+	return 0;
+}
+#endif
+
+static int
+type_pf_ttest(struct ip_set *set, void *value, u32 timeout, u32 flags)
+{
+	struct ip_set_hash *h = set->data;
+	struct htable *t = h->table;
+	struct type_pf_elem *data, *d = value;
+	struct hbucket *n;
+	int i;
+	u32 key, multi = 0;
+
+#ifdef IP_SET_HASH_WITH_NETS
+	if (CIDR(d->cidr) == SET_HOST_MASK(set->family))
+		return type_pf_ttest_cidrs(set, d, timeout);
+#endif
+	key = HKEY(d, h->initval, t->htable_bits);
+	n = hbucket(t, key);
+	for (i = 0; i < n->pos; i++) {
+		data = ahash_tdata(n, i);
+		if (type_pf_data_equal(data, d, &multi) &&
+		    !type_pf_data_expired(data))
+			return type_pf_data_match(data);
+	}
+	return 0;
+}
+
+static int
+type_pf_tlist(const struct ip_set *set,
+	      struct sk_buff *skb, struct netlink_callback *cb)
+{
+	const struct ip_set_hash *h = set->data;
+	const struct htable *t = h->table;
+	struct nlattr *atd, *nested;
+	const struct hbucket *n;
+	const struct type_pf_elem *data;
+	u32 first = cb->args[2];
+	/* We assume that one hash bucket fills into one page */
+	void *incomplete;
+	int i;
+
+	atd = ipset_nest_start(skb, IPSET_ATTR_ADT);
+	if (!atd)
+		return -EMSGSIZE;
+	for (; cb->args[2] < jhash_size(t->htable_bits); cb->args[2]++) {
+		incomplete = skb_tail_pointer(skb);
+		n = hbucket(t, cb->args[2]);
+		for (i = 0; i < n->pos; i++) {
+			data = ahash_tdata(n, i);
+			pr_debug("list %p %u\n", n, i);
+			if (type_pf_data_expired(data))
+				continue;
+			pr_debug("do list %p %u\n", n, i);
+			nested = ipset_nest_start(skb, IPSET_ATTR_DATA);
+			if (!nested) {
+				if (cb->args[2] == first) {
+					nla_nest_cancel(skb, atd);
+					return -EMSGSIZE;
+				} else
+					goto nla_put_failure;
+			}
+			if (type_pf_data_tlist(skb, data))
+				goto nla_put_failure;
+			ipset_nest_end(skb, nested);
+		}
+	}
+	ipset_nest_end(skb, atd);
+	/* Set listing finished */
+	cb->args[2] = 0;
+
+	return 0;
+
+nla_put_failure:
+	nlmsg_trim(skb, incomplete);
+	ipset_nest_end(skb, atd);
+	if (unlikely(first == cb->args[2])) {
+		pr_warning("Can't list set %s: one bucket does not fit into "
+			   "a message. Please report it!\n", set->name);
+		cb->args[2] = 0;
+		return -EMSGSIZE;
+	}
+	return 0;
+}
+
+static const struct ip_set_type_variant type_pf_tvariant = {
+	.kadt	= type_pf_kadt,
+	.uadt	= type_pf_uadt,
+	.adt	= {
+		[IPSET_ADD] = type_pf_tadd,
+		[IPSET_DEL] = type_pf_tdel,
+		[IPSET_TEST] = type_pf_ttest,
+	},
+	.destroy = type_pf_destroy,
+	.flush	= type_pf_flush,
+	.head	= type_pf_head,
+	.list	= type_pf_tlist,
+	.resize	= type_pf_tresize,
+	.same_set = type_pf_same_set,
+};
+
+static void
+type_pf_gc(unsigned long ul_set)
+{
+	struct ip_set *set = (struct ip_set *) ul_set;
+	struct ip_set_hash *h = set->data;
+
+	pr_debug("called\n");
+	write_lock_bh(&set->lock);
+	type_pf_expire(h);
+	write_unlock_bh(&set->lock);
+
+	h->gc.expires = jiffies + IPSET_GC_PERIOD(h->timeout) * HZ;
+	add_timer(&h->gc);
+}
+
+static void
+type_pf_gc_init(struct ip_set *set)
+{
+	struct ip_set_hash *h = set->data;
+
+	init_timer(&h->gc);
+	h->gc.data = (unsigned long) set;
+	h->gc.function = type_pf_gc;
+	h->gc.expires = jiffies + IPSET_GC_PERIOD(h->timeout) * HZ;
+	add_timer(&h->gc);
+	pr_debug("gc initialized, run in every %u\n",
+		 IPSET_GC_PERIOD(h->timeout));
+}
+
+#undef HKEY_DATALEN
+#undef HKEY
+#undef type_pf_data_equal
+#undef type_pf_data_isnull
+#undef type_pf_data_copy
+#undef type_pf_data_zero_out
+#undef type_pf_data_netmask
+#undef type_pf_data_list
+#undef type_pf_data_tlist
+#undef type_pf_data_next
+#undef type_pf_data_flags
+#undef type_pf_data_match
+
+#undef type_pf_elem
+#undef type_pf_telem
+#undef type_pf_data_timeout
+#undef type_pf_data_expired
+#undef type_pf_data_timeout_set
+
+#undef type_pf_elem_add
+#undef type_pf_add
+#undef type_pf_del
+#undef type_pf_test_cidrs
+#undef type_pf_test
+
+#undef type_pf_elem_tadd
+#undef type_pf_del_telem
+#undef type_pf_expire
+#undef type_pf_tadd
+#undef type_pf_tdel
+#undef type_pf_ttest_cidrs
+#undef type_pf_ttest
+
+#undef type_pf_resize
+#undef type_pf_tresize
+#undef type_pf_flush
+#undef type_pf_destroy
+#undef type_pf_head
+#undef type_pf_list
+#undef type_pf_tlist
+#undef type_pf_same_set
+#undef type_pf_kadt
+#undef type_pf_uadt
+#undef type_pf_gc
+#undef type_pf_gc_init
+#undef type_pf_variant
+#undef type_pf_tvariant
diff --git a/include/linux/netfilter/ipset/ip_set_bitmap.h b/include/linux/netfilter/ipset/ip_set_bitmap.h
new file mode 100644
index 00000000..61a9e874
--- /dev/null
+++ b/include/linux/netfilter/ipset/ip_set_bitmap.h
@@ -0,0 +1,31 @@
+#ifndef __IP_SET_BITMAP_H
+#define __IP_SET_BITMAP_H
+
+/* Bitmap type specific error codes */
+enum {
+	/* The element is out of the range of the set */
+	IPSET_ERR_BITMAP_RANGE = IPSET_ERR_TYPE_SPECIFIC,
+	/* The range exceeds the size limit of the set type */
+	IPSET_ERR_BITMAP_RANGE_SIZE,
+};
+
+#ifdef __KERNEL__
+#define IPSET_BITMAP_MAX_RANGE	0x0000FFFF
+
+/* Common functions */
+
+static inline u32
+range_to_mask(u32 from, u32 to, u8 *bits)
+{
+	u32 mask = 0xFFFFFFFE;
+
+	*bits = 32;
+	while (--(*bits) > 0 && mask && (to & mask) != from)
+		mask <<= 1;
+
+	return mask;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* __IP_SET_BITMAP_H */
diff --git a/include/linux/netfilter/ipset/ip_set_getport.h b/include/linux/netfilter/ipset/ip_set_getport.h
new file mode 100644
index 00000000..90d09300
--- /dev/null
+++ b/include/linux/netfilter/ipset/ip_set_getport.h
@@ -0,0 +1,33 @@
+#ifndef _IP_SET_GETPORT_H
+#define _IP_SET_GETPORT_H
+
+extern bool ip_set_get_ip4_port(const struct sk_buff *skb, bool src,
+				__be16 *port, u8 *proto);
+
+#if defined(CONFIG_IP6_NF_IPTABLES) || defined(CONFIG_IP6_NF_IPTABLES_MODULE)
+extern bool ip_set_get_ip6_port(const struct sk_buff *skb, bool src,
+				__be16 *port, u8 *proto);
+#else
+static inline bool ip_set_get_ip6_port(const struct sk_buff *skb, bool src,
+				       __be16 *port, u8 *proto)
+{
+	return false;
+}
+#endif
+
+extern bool ip_set_get_ip_port(const struct sk_buff *skb, u8 pf, bool src,
+				__be16 *port);
+
+static inline bool ip_set_proto_with_ports(u8 proto)
+{
+	switch (proto) {
+	case IPPROTO_TCP:
+	case IPPROTO_SCTP:
+	case IPPROTO_UDP:
+	case IPPROTO_UDPLITE:
+		return true;
+	}
+	return false;
+}
+
+#endif /*_IP_SET_GETPORT_H*/
diff --git a/include/linux/netfilter/ipset/ip_set_hash.h b/include/linux/netfilter/ipset/ip_set_hash.h
new file mode 100644
index 00000000..e2a9fae7
--- /dev/null
+++ b/include/linux/netfilter/ipset/ip_set_hash.h
@@ -0,0 +1,30 @@
+#ifndef __IP_SET_HASH_H
+#define __IP_SET_HASH_H
+
+/* Hash type specific error codes */
+enum {
+	/* Hash is full */
+	IPSET_ERR_HASH_FULL = IPSET_ERR_TYPE_SPECIFIC,
+	/* Null-valued element */
+	IPSET_ERR_HASH_ELEM,
+	/* Invalid protocol */
+	IPSET_ERR_INVALID_PROTO,
+	/* Protocol missing but must be specified */
+	IPSET_ERR_MISSING_PROTO,
+	/* Range not supported */
+	IPSET_ERR_HASH_RANGE_UNSUPPORTED,
+	/* Invalid range */
+	IPSET_ERR_HASH_RANGE,
+};
+
+#ifdef __KERNEL__
+
+#define IPSET_DEFAULT_HASHSIZE		1024
+#define IPSET_MIMINAL_HASHSIZE		64
+#define IPSET_DEFAULT_MAXELEM		65536
+#define IPSET_DEFAULT_PROBES		4
+#define IPSET_DEFAULT_RESIZE		100
+
+#endif /* __KERNEL__ */
+
+#endif /* __IP_SET_HASH_H */
diff --git a/include/linux/netfilter/ipset/ip_set_list.h b/include/linux/netfilter/ipset/ip_set_list.h
new file mode 100644
index 00000000..40a63f30
--- /dev/null
+++ b/include/linux/netfilter/ipset/ip_set_list.h
@@ -0,0 +1,27 @@
+#ifndef __IP_SET_LIST_H
+#define __IP_SET_LIST_H
+
+/* List type specific error codes */
+enum {
+	/* Set name to be added/deleted/tested does not exist. */
+	IPSET_ERR_NAME = IPSET_ERR_TYPE_SPECIFIC,
+	/* list:set type is not permitted to add */
+	IPSET_ERR_LOOP,
+	/* Missing reference set */
+	IPSET_ERR_BEFORE,
+	/* Reference set does not exist */
+	IPSET_ERR_NAMEREF,
+	/* Set is full */
+	IPSET_ERR_LIST_FULL,
+	/* Reference set is not added to the set */
+	IPSET_ERR_REF_EXIST,
+};
+
+#ifdef __KERNEL__
+
+#define IP_SET_LIST_DEFAULT_SIZE	8
+#define IP_SET_LIST_MIN_SIZE		4
+
+#endif /* __KERNEL__ */
+
+#endif /* __IP_SET_LIST_H */
diff --git a/include/linux/netfilter/ipset/ip_set_timeout.h b/include/linux/netfilter/ipset/ip_set_timeout.h
new file mode 100644
index 00000000..47923205
--- /dev/null
+++ b/include/linux/netfilter/ipset/ip_set_timeout.h
@@ -0,0 +1,132 @@
+#ifndef _IP_SET_TIMEOUT_H
+#define _IP_SET_TIMEOUT_H
+
+/* Copyright (C) 2003-2011 Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifdef __KERNEL__
+
+/* How often should the gc be run by default */
+#define IPSET_GC_TIME			(3 * 60)
+
+/* Timeout period depending on the timeout value of the given set */
+#define IPSET_GC_PERIOD(timeout) \
+	((timeout/3) ? min_t(u32, (timeout)/3, IPSET_GC_TIME) : 1)
+
+/* Set is defined without timeout support: timeout value may be 0 */
+#define IPSET_NO_TIMEOUT	UINT_MAX
+
+#define with_timeout(timeout)	((timeout) != IPSET_NO_TIMEOUT)
+
+#define opt_timeout(opt, map)	\
+	(with_timeout((opt)->timeout) ? (opt)->timeout : (map)->timeout)
+
+static inline unsigned int
+ip_set_timeout_uget(struct nlattr *tb)
+{
+	unsigned int timeout = ip_set_get_h32(tb);
+
+	/* Userspace supplied TIMEOUT parameter: adjust crazy size */
+	return timeout == IPSET_NO_TIMEOUT ? IPSET_NO_TIMEOUT - 1 : timeout;
+}
+
+#ifdef IP_SET_BITMAP_TIMEOUT
+
+/* Bitmap specific timeout constants and macros for the entries */
+
+/* Bitmap entry is unset */
+#define IPSET_ELEM_UNSET	0
+/* Bitmap entry is set with no timeout value */
+#define IPSET_ELEM_PERMANENT	(UINT_MAX/2)
+
+static inline bool
+ip_set_timeout_test(unsigned long timeout)
+{
+	return timeout != IPSET_ELEM_UNSET &&
+	       (timeout == IPSET_ELEM_PERMANENT ||
+		time_is_after_jiffies(timeout));
+}
+
+static inline bool
+ip_set_timeout_expired(unsigned long timeout)
+{
+	return timeout != IPSET_ELEM_UNSET &&
+	       timeout != IPSET_ELEM_PERMANENT &&
+	       time_is_before_jiffies(timeout);
+}
+
+static inline unsigned long
+ip_set_timeout_set(u32 timeout)
+{
+	unsigned long t;
+
+	if (!timeout)
+		return IPSET_ELEM_PERMANENT;
+
+	t = msecs_to_jiffies(timeout * 1000) + jiffies;
+	if (t == IPSET_ELEM_UNSET || t == IPSET_ELEM_PERMANENT)
+		/* Bingo! */
+		t++;
+
+	return t;
+}
+
+static inline u32
+ip_set_timeout_get(unsigned long timeout)
+{
+	return timeout == IPSET_ELEM_PERMANENT ? 0 :
+		jiffies_to_msecs(timeout - jiffies)/1000;
+}
+
+#else
+
+/* Hash specific timeout constants and macros for the entries */
+
+/* Hash entry is set with no timeout value */
+#define IPSET_ELEM_PERMANENT	0
+
+static inline bool
+ip_set_timeout_test(unsigned long timeout)
+{
+	return timeout == IPSET_ELEM_PERMANENT ||
+	       time_is_after_jiffies(timeout);
+}
+
+static inline bool
+ip_set_timeout_expired(unsigned long timeout)
+{
+	return timeout != IPSET_ELEM_PERMANENT &&
+	       time_is_before_jiffies(timeout);
+}
+
+static inline unsigned long
+ip_set_timeout_set(u32 timeout)
+{
+	unsigned long t;
+
+	if (!timeout)
+		return IPSET_ELEM_PERMANENT;
+
+	t = msecs_to_jiffies(timeout * 1000) + jiffies;
+	if (t == IPSET_ELEM_PERMANENT)
+		/* Bingo! :-) */
+		t++;
+
+	return t;
+}
+
+static inline u32
+ip_set_timeout_get(unsigned long timeout)
+{
+	return timeout == IPSET_ELEM_PERMANENT ? 0 :
+		jiffies_to_msecs(timeout - jiffies)/1000;
+}
+#endif /* ! IP_SET_BITMAP_TIMEOUT */
+
+#endif	/* __KERNEL__ */
+
+#endif /* _IP_SET_TIMEOUT_H */
diff --git a/include/linux/netfilter/ipset/pfxlen.h b/include/linux/netfilter/ipset/pfxlen.h
new file mode 100644
index 00000000..199fd11f
--- /dev/null
+++ b/include/linux/netfilter/ipset/pfxlen.h
@@ -0,0 +1,44 @@
+#ifndef _PFXLEN_H
+#define _PFXLEN_H
+
+#include <asm/byteorder.h>
+#include <linux/netfilter.h>
+#include <net/tcp.h>
+
+/* Prefixlen maps, by Jan Engelhardt  */
+extern const union nf_inet_addr ip_set_netmask_map[];
+extern const union nf_inet_addr ip_set_hostmask_map[];
+
+static inline __be32
+ip_set_netmask(u8 pfxlen)
+{
+	return ip_set_netmask_map[pfxlen].ip;
+}
+
+static inline const __be32 *
+ip_set_netmask6(u8 pfxlen)
+{
+	return &ip_set_netmask_map[pfxlen].ip6[0];
+}
+
+static inline u32
+ip_set_hostmask(u8 pfxlen)
+{
+	return (__force u32) ip_set_hostmask_map[pfxlen].ip;
+}
+
+static inline const __be32 *
+ip_set_hostmask6(u8 pfxlen)
+{
+	return &ip_set_hostmask_map[pfxlen].ip6[0];
+}
+
+extern u32 ip_set_range_to_cidr(u32 from, u32 to, u8 *cidr);
+
+#define ip_set_mask_from_to(from, to, cidr)	\
+do {						\
+	from &= ip_set_hostmask(cidr);		\
+	to = from | ~ip_set_hostmask(cidr);	\
+} while (0)
+
+#endif /*_PFXLEN_H */
diff --git a/include/linux/netfilter/nf_conntrack_amanda.h b/include/linux/netfilter/nf_conntrack_amanda.h
new file mode 100644
index 00000000..0bb5a697
--- /dev/null
+++ b/include/linux/netfilter/nf_conntrack_amanda.h
@@ -0,0 +1,10 @@
+#ifndef _NF_CONNTRACK_AMANDA_H
+#define _NF_CONNTRACK_AMANDA_H
+/* AMANDA tracking. */
+
+extern unsigned int (*nf_nat_amanda_hook)(struct sk_buff *skb,
+					  enum ip_conntrack_info ctinfo,
+					  unsigned int matchoff,
+					  unsigned int matchlen,
+					  struct nf_conntrack_expect *exp);
+#endif /* _NF_CONNTRACK_AMANDA_H */
diff --git a/include/linux/netfilter/nf_conntrack_common.h b/include/linux/netfilter/nf_conntrack_common.h
new file mode 100644
index 00000000..0d3dd663
--- /dev/null
+++ b/include/linux/netfilter/nf_conntrack_common.h
@@ -0,0 +1,137 @@
+#ifndef _NF_CONNTRACK_COMMON_H
+#define _NF_CONNTRACK_COMMON_H
+/* Connection state tracking for netfilter.  This is separated from,
+   but required by, the NAT layer; it can also be used by an iptables
+   extension. */
+enum ip_conntrack_info {
+	/* Part of an established connection (either direction). */
+	IP_CT_ESTABLISHED,
+
+	/* Like NEW, but related to an existing connection, or ICMP error
+	   (in either direction). */
+	IP_CT_RELATED,
+
+	/* Started a new connection to track (only
+           IP_CT_DIR_ORIGINAL); may be a retransmission. */
+	IP_CT_NEW,
+
+	/* >= this indicates reply direction */
+	IP_CT_IS_REPLY,
+
+	IP_CT_ESTABLISHED_REPLY = IP_CT_ESTABLISHED + IP_CT_IS_REPLY,
+	IP_CT_RELATED_REPLY = IP_CT_RELATED + IP_CT_IS_REPLY,
+	IP_CT_NEW_REPLY = IP_CT_NEW + IP_CT_IS_REPLY,	
+	/* Number of distinct IP_CT types (no NEW in reply dirn). */
+	IP_CT_NUMBER = IP_CT_IS_REPLY * 2 - 1
+};
+
+/* Bitset representing status of connection. */
+enum ip_conntrack_status {
+	/* It's an expected connection: bit 0 set.  This bit never changed */
+	IPS_EXPECTED_BIT = 0,
+	IPS_EXPECTED = (1 << IPS_EXPECTED_BIT),
+
+	/* We've seen packets both ways: bit 1 set.  Can be set, not unset. */
+	IPS_SEEN_REPLY_BIT = 1,
+	IPS_SEEN_REPLY = (1 << IPS_SEEN_REPLY_BIT),
+
+	/* Conntrack should never be early-expired. */
+	IPS_ASSURED_BIT = 2,
+	IPS_ASSURED = (1 << IPS_ASSURED_BIT),
+
+	/* Connection is confirmed: originating packet has left box */
+	IPS_CONFIRMED_BIT = 3,
+	IPS_CONFIRMED = (1 << IPS_CONFIRMED_BIT),
+
+	/* Connection needs src nat in orig dir.  This bit never changed. */
+	IPS_SRC_NAT_BIT = 4,
+	IPS_SRC_NAT = (1 << IPS_SRC_NAT_BIT),
+
+	/* Connection needs dst nat in orig dir.  This bit never changed. */
+	IPS_DST_NAT_BIT = 5,
+	IPS_DST_NAT = (1 << IPS_DST_NAT_BIT),
+
+	/* Both together. */
+	IPS_NAT_MASK = (IPS_DST_NAT | IPS_SRC_NAT),
+
+	/* Connection needs TCP sequence adjusted. */
+	IPS_SEQ_ADJUST_BIT = 6,
+	IPS_SEQ_ADJUST = (1 << IPS_SEQ_ADJUST_BIT),
+
+	/* NAT initialization bits. */
+	IPS_SRC_NAT_DONE_BIT = 7,
+	IPS_SRC_NAT_DONE = (1 << IPS_SRC_NAT_DONE_BIT),
+
+	IPS_DST_NAT_DONE_BIT = 8,
+	IPS_DST_NAT_DONE = (1 << IPS_DST_NAT_DONE_BIT),
+
+	/* Both together */
+	IPS_NAT_DONE_MASK = (IPS_DST_NAT_DONE | IPS_SRC_NAT_DONE),
+
+	/* Connection is dying (removed from lists), can not be unset. */
+	IPS_DYING_BIT = 9,
+	IPS_DYING = (1 << IPS_DYING_BIT),
+
+	/* Connection has fixed timeout. */
+	IPS_FIXED_TIMEOUT_BIT = 10,
+	IPS_FIXED_TIMEOUT = (1 << IPS_FIXED_TIMEOUT_BIT),
+
+	/* Conntrack is a template */
+	IPS_TEMPLATE_BIT = 11,
+	IPS_TEMPLATE = (1 << IPS_TEMPLATE_BIT),
+
+	/* Conntrack is a fake untracked entry */
+	IPS_UNTRACKED_BIT = 12,
+	IPS_UNTRACKED = (1 << IPS_UNTRACKED_BIT),
+};
+
+/* Connection tracking event types */
+enum ip_conntrack_events {
+	IPCT_NEW,		/* new conntrack */
+	IPCT_RELATED,		/* related conntrack */
+	IPCT_DESTROY,		/* destroyed conntrack */
+	IPCT_REPLY,		/* connection has seen two-way traffic */
+	IPCT_ASSURED,		/* connection status has changed to assured */
+	IPCT_PROTOINFO,		/* protocol information has changed */
+	IPCT_HELPER,		/* new helper has been set */
+	IPCT_MARK,		/* new mark has been set */
+	IPCT_NATSEQADJ,		/* NAT is doing sequence adjustment */
+	IPCT_SECMARK,		/* new security mark has been set */
+};
+
+enum ip_conntrack_expect_events {
+	IPEXP_NEW,		/* new expectation */
+	IPEXP_DESTROY,		/* destroyed expectation */
+};
+
+/* expectation flags */
+#define NF_CT_EXPECT_PERMANENT		0x1
+#define NF_CT_EXPECT_INACTIVE		0x2
+#define NF_CT_EXPECT_USERSPACE		0x4
+
+#ifdef __KERNEL__
+struct ip_conntrack_stat {
+	unsigned int searched;
+	unsigned int found;
+	unsigned int new;
+	unsigned int invalid;
+	unsigned int ignore;
+	unsigned int delete;
+	unsigned int delete_list;
+	unsigned int insert;
+	unsigned int insert_failed;
+	unsigned int drop;
+	unsigned int early_drop;
+	unsigned int error;
+	unsigned int expect_new;
+	unsigned int expect_create;
+	unsigned int expect_delete;
+	unsigned int search_restart;
+};
+
+/* call to create an explicit dependency on nf_conntrack. */
+extern void need_conntrack(void);
+
+#endif /* __KERNEL__ */
+
+#endif /* _NF_CONNTRACK_COMMON_H */
diff --git a/include/linux/netfilter/nf_conntrack_dccp.h b/include/linux/netfilter/nf_conntrack_dccp.h
new file mode 100644
index 00000000..40dcc820
--- /dev/null
+++ b/include/linux/netfilter/nf_conntrack_dccp.h
@@ -0,0 +1,40 @@
+#ifndef _NF_CONNTRACK_DCCP_H
+#define _NF_CONNTRACK_DCCP_H
+
+/* Exposed to userspace over nfnetlink */
+enum ct_dccp_states {
+	CT_DCCP_NONE,
+	CT_DCCP_REQUEST,
+	CT_DCCP_RESPOND,
+	CT_DCCP_PARTOPEN,
+	CT_DCCP_OPEN,
+	CT_DCCP_CLOSEREQ,
+	CT_DCCP_CLOSING,
+	CT_DCCP_TIMEWAIT,
+	CT_DCCP_IGNORE,
+	CT_DCCP_INVALID,
+	__CT_DCCP_MAX
+};
+#define CT_DCCP_MAX		(__CT_DCCP_MAX - 1)
+
+enum ct_dccp_roles {
+	CT_DCCP_ROLE_CLIENT,
+	CT_DCCP_ROLE_SERVER,
+	__CT_DCCP_ROLE_MAX
+};
+#define CT_DCCP_ROLE_MAX	(__CT_DCCP_ROLE_MAX - 1)
+
+#ifdef __KERNEL__
+#include <net/netfilter/nf_conntrack_tuple.h>
+
+struct nf_ct_dccp {
+	u_int8_t	role[IP_CT_DIR_MAX];
+	u_int8_t	state;
+	u_int8_t	last_pkt;
+	u_int8_t	last_dir;
+	u_int64_t	handshake_seq;
+};
+
+#endif /* __KERNEL__ */
+
+#endif /* _NF_CONNTRACK_DCCP_H */
diff --git a/include/linux/netfilter/nf_conntrack_ftp.h b/include/linux/netfilter/nf_conntrack_ftp.h
new file mode 100644
index 00000000..3e3aa089
--- /dev/null
+++ b/include/linux/netfilter/nf_conntrack_ftp.h
@@ -0,0 +1,42 @@
+#ifndef _NF_CONNTRACK_FTP_H
+#define _NF_CONNTRACK_FTP_H
+/* FTP tracking. */
+
+/* This enum is exposed to userspace */
+enum nf_ct_ftp_type {
+	/* PORT command from client */
+	NF_CT_FTP_PORT,
+	/* PASV response from server */
+	NF_CT_FTP_PASV,
+	/* EPRT command from client */
+	NF_CT_FTP_EPRT,
+	/* EPSV response from server */
+	NF_CT_FTP_EPSV,
+};
+
+#ifdef __KERNEL__
+
+#define FTP_PORT	21
+
+#define NUM_SEQ_TO_REMEMBER 2
+/* This structure exists only once per master */
+struct nf_ct_ftp_master {
+	/* Valid seq positions for cmd matching after newline */
+	u_int32_t seq_aft_nl[IP_CT_DIR_MAX][NUM_SEQ_TO_REMEMBER];
+	/* 0 means seq_match_aft_nl not set */
+	int seq_aft_nl_num[IP_CT_DIR_MAX];
+};
+
+struct nf_conntrack_expect;
+
+/* For NAT to hook in when we find a packet which describes what other
+ * connection we should expect. */
+extern unsigned int (*nf_nat_ftp_hook)(struct sk_buff *skb,
+				       enum ip_conntrack_info ctinfo,
+				       enum nf_ct_ftp_type type,
+				       unsigned int matchoff,
+				       unsigned int matchlen,
+				       struct nf_conntrack_expect *exp);
+#endif /* __KERNEL__ */
+
+#endif /* _NF_CONNTRACK_FTP_H */
diff --git a/include/linux/netfilter/nf_conntrack_h323.h b/include/linux/netfilter/nf_conntrack_h323.h
new file mode 100644
index 00000000..26f9226e
--- /dev/null
+++ b/include/linux/netfilter/nf_conntrack_h323.h
@@ -0,0 +1,92 @@
+#ifndef _NF_CONNTRACK_H323_H
+#define _NF_CONNTRACK_H323_H
+
+#ifdef __KERNEL__
+
+#include <linux/netfilter/nf_conntrack_h323_asn1.h>
+
+#define RAS_PORT 1719
+#define Q931_PORT 1720
+#define H323_RTP_CHANNEL_MAX 4	/* Audio, video, FAX and other */
+
+/* This structure exists only once per master */
+struct nf_ct_h323_master {
+
+	/* Original and NATed Q.931 or H.245 signal ports */
+	__be16 sig_port[IP_CT_DIR_MAX];
+
+	/* Original and NATed RTP ports */
+	__be16 rtp_port[H323_RTP_CHANNEL_MAX][IP_CT_DIR_MAX];
+
+	union {
+		/* RAS connection timeout */
+		u_int32_t timeout;
+
+		/* Next TPKT length (for separate TPKT header and data) */
+		u_int16_t tpkt_len[IP_CT_DIR_MAX];
+	};
+};
+
+struct nf_conn;
+
+extern int get_h225_addr(struct nf_conn *ct, unsigned char *data,
+			 TransportAddress *taddr,
+			 union nf_inet_addr *addr, __be16 *port);
+extern void nf_conntrack_h245_expect(struct nf_conn *new,
+				     struct nf_conntrack_expect *this);
+extern void nf_conntrack_q931_expect(struct nf_conn *new,
+				     struct nf_conntrack_expect *this);
+extern int (*set_h245_addr_hook) (struct sk_buff *skb,
+				  unsigned char **data, int dataoff,
+				  H245_TransportAddress *taddr,
+				  union nf_inet_addr *addr,
+				  __be16 port);
+extern int (*set_h225_addr_hook) (struct sk_buff *skb,
+				  unsigned char **data, int dataoff,
+				  TransportAddress *taddr,
+				  union nf_inet_addr *addr,
+				  __be16 port);
+extern int (*set_sig_addr_hook) (struct sk_buff *skb,
+				 struct nf_conn *ct,
+				 enum ip_conntrack_info ctinfo,
+				 unsigned char **data,
+				 TransportAddress *taddr, int count);
+extern int (*set_ras_addr_hook) (struct sk_buff *skb,
+				 struct nf_conn *ct,
+				 enum ip_conntrack_info ctinfo,
+				 unsigned char **data,
+				 TransportAddress *taddr, int count);
+extern int (*nat_rtp_rtcp_hook) (struct sk_buff *skb,
+				 struct nf_conn *ct,
+				 enum ip_conntrack_info ctinfo,
+				 unsigned char **data, int dataoff,
+				 H245_TransportAddress *taddr,
+				 __be16 port, __be16 rtp_port,
+				 struct nf_conntrack_expect *rtp_exp,
+				 struct nf_conntrack_expect *rtcp_exp);
+extern int (*nat_t120_hook) (struct sk_buff *skb, struct nf_conn *ct,
+			     enum ip_conntrack_info ctinfo,
+			     unsigned char **data, int dataoff,
+			     H245_TransportAddress *taddr, __be16 port,
+			     struct nf_conntrack_expect *exp);
+extern int (*nat_h245_hook) (struct sk_buff *skb, struct nf_conn *ct,
+			     enum ip_conntrack_info ctinfo,
+			     unsigned char **data, int dataoff,
+			     TransportAddress *taddr, __be16 port,
+			     struct nf_conntrack_expect *exp);
+extern int (*nat_callforwarding_hook) (struct sk_buff *skb,
+				       struct nf_conn *ct,
+				       enum ip_conntrack_info ctinfo,
+				       unsigned char **data, int dataoff,
+				       TransportAddress *taddr,
+				       __be16 port,
+				       struct nf_conntrack_expect *exp);
+extern int (*nat_q931_hook) (struct sk_buff *skb, struct nf_conn *ct,
+			     enum ip_conntrack_info ctinfo,
+			     unsigned char **data, TransportAddress *taddr,
+			     int idx, __be16 port,
+			     struct nf_conntrack_expect *exp);
+
+#endif
+
+#endif
diff --git a/include/linux/netfilter/nf_conntrack_h323_asn1.h b/include/linux/netfilter/nf_conntrack_h323_asn1.h
new file mode 100644
index 00000000..8dab5968
--- /dev/null
+++ b/include/linux/netfilter/nf_conntrack_h323_asn1.h
@@ -0,0 +1,98 @@
+/****************************************************************************
+ * ip_conntrack_h323_asn1.h - BER and PER decoding library for H.323
+ * 			      conntrack/NAT module.
+ *
+ * Copyright (c) 2006 by Jing Min Zhao <zhaojingmin@users.sourceforge.net>
+ *
+ * This source code is licensed under General Public License version 2.
+ *
+ *
+ * This library is based on H.225 version 4, H.235 version 2 and H.245
+ * version 7. It is extremely optimized to decode only the absolutely
+ * necessary objects in a signal for Linux kernel NAT module use, so don't
+ * expect it to be a full ASN.1 library.
+ *
+ * Features:
+ *
+ * 1. Small. The total size of code plus data is less than 20 KB (IA32).
+ * 2. Fast. Decoding Netmeeting's Setup signal 1 million times on a PIII 866
+ *    takes only 3.9 seconds.
+ * 3. No memory allocation. It uses a static object. No need to initialize or
+ *    cleanup.
+ * 4. Thread safe.
+ * 5. Support embedded architectures that has no misaligned memory access
+ *    support.
+ *
+ * Limitations:
+ *
+ * 1. At most 30 faststart entries. Actually this is limited by ethernet's MTU.
+ *    If a Setup signal contains more than 30 faststart, the packet size will
+ *    very likely exceed the MTU size, then the TPKT will be fragmented. I
+ *    don't know how to handle this in a Netfilter module. Anybody can help?
+ *    Although I think 30 is enough for most of the cases.
+ * 2. IPv4 addresses only.
+ *
+ ****************************************************************************/
+
+#ifndef _NF_CONNTRACK_HELPER_H323_ASN1_H_
+#define _NF_CONNTRACK_HELPER_H323_ASN1_H_
+
+/*****************************************************************************
+ * H.323 Types
+ ****************************************************************************/
+#include "nf_conntrack_h323_types.h"
+
+typedef struct {
+	enum {
+		Q931_NationalEscape = 0x00,
+		Q931_Alerting = 0x01,
+		Q931_CallProceeding = 0x02,
+		Q931_Connect = 0x07,
+		Q931_ConnectAck = 0x0F,
+		Q931_Progress = 0x03,
+		Q931_Setup = 0x05,
+		Q931_SetupAck = 0x0D,
+		Q931_Resume = 0x26,
+		Q931_ResumeAck = 0x2E,
+		Q931_ResumeReject = 0x22,
+		Q931_Suspend = 0x25,
+		Q931_SuspendAck = 0x2D,
+		Q931_SuspendReject = 0x21,
+		Q931_UserInformation = 0x20,
+		Q931_Disconnect = 0x45,
+		Q931_Release = 0x4D,
+		Q931_ReleaseComplete = 0x5A,
+		Q931_Restart = 0x46,
+		Q931_RestartAck = 0x4E,
+		Q931_Segment = 0x60,
+		Q931_CongestionCtrl = 0x79,
+		Q931_Information = 0x7B,
+		Q931_Notify = 0x6E,
+		Q931_Status = 0x7D,
+		Q931_StatusEnquiry = 0x75,
+		Q931_Facility = 0x62
+	} MessageType;
+	H323_UserInformation UUIE;
+} Q931;
+
+/*****************************************************************************
+ * Decode Functions Return Codes
+ ****************************************************************************/
+
+#define H323_ERROR_NONE 0	/* Decoded successfully */
+#define H323_ERROR_STOP 1	/* Decoding stopped, not really an error */
+#define H323_ERROR_BOUND -1
+#define H323_ERROR_RANGE -2
+
+
+/*****************************************************************************
+ * Decode Functions
+ ****************************************************************************/
+
+int DecodeRasMessage(unsigned char *buf, size_t sz, RasMessage * ras);
+int DecodeQ931(unsigned char *buf, size_t sz, Q931 * q931);
+int DecodeMultimediaSystemControlMessage(unsigned char *buf, size_t sz,
+					 MultimediaSystemControlMessage *
+					 mscm);
+
+#endif
diff --git a/include/linux/netfilter/nf_conntrack_h323_types.h b/include/linux/netfilter/nf_conntrack_h323_types.h
new file mode 100644
index 00000000..f35b6b48
--- /dev/null
+++ b/include/linux/netfilter/nf_conntrack_h323_types.h
@@ -0,0 +1,934 @@
+/* Generated by Jing Min Zhao's ASN.1 parser, May 16 2007
+ *
+ * Copyright (c) 2006 Jing Min Zhao <zhaojingmin@users.sourceforge.net>
+ *
+ * This source code is licensed under General Public License version 2.
+ */
+
+typedef struct TransportAddress_ipAddress {	/* SEQUENCE */
+	int options;		/* No use */
+	unsigned ip;
+} TransportAddress_ipAddress;
+
+typedef struct TransportAddress_ip6Address {	/* SEQUENCE */
+	int options;		/* No use */
+	unsigned ip;
+} TransportAddress_ip6Address;
+
+typedef struct TransportAddress {	/* CHOICE */
+	enum {
+		eTransportAddress_ipAddress,
+		eTransportAddress_ipSourceRoute,
+		eTransportAddress_ipxAddress,
+		eTransportAddress_ip6Address,
+		eTransportAddress_netBios,
+		eTransportAddress_nsap,
+		eTransportAddress_nonStandardAddress,
+	} choice;
+	union {
+		TransportAddress_ipAddress ipAddress;
+		TransportAddress_ip6Address ip6Address;
+	};
+} TransportAddress;
+
+typedef struct DataProtocolCapability {	/* CHOICE */
+	enum {
+		eDataProtocolCapability_nonStandard,
+		eDataProtocolCapability_v14buffered,
+		eDataProtocolCapability_v42lapm,
+		eDataProtocolCapability_hdlcFrameTunnelling,
+		eDataProtocolCapability_h310SeparateVCStack,
+		eDataProtocolCapability_h310SingleVCStack,
+		eDataProtocolCapability_transparent,
+		eDataProtocolCapability_segmentationAndReassembly,
+		eDataProtocolCapability_hdlcFrameTunnelingwSAR,
+		eDataProtocolCapability_v120,
+		eDataProtocolCapability_separateLANStack,
+		eDataProtocolCapability_v76wCompression,
+		eDataProtocolCapability_tcp,
+		eDataProtocolCapability_udp,
+	} choice;
+} DataProtocolCapability;
+
+typedef struct DataApplicationCapability_application {	/* CHOICE */
+	enum {
+		eDataApplicationCapability_application_nonStandard,
+		eDataApplicationCapability_application_t120,
+		eDataApplicationCapability_application_dsm_cc,
+		eDataApplicationCapability_application_userData,
+		eDataApplicationCapability_application_t84,
+		eDataApplicationCapability_application_t434,
+		eDataApplicationCapability_application_h224,
+		eDataApplicationCapability_application_nlpid,
+		eDataApplicationCapability_application_dsvdControl,
+		eDataApplicationCapability_application_h222DataPartitioning,
+		eDataApplicationCapability_application_t30fax,
+		eDataApplicationCapability_application_t140,
+		eDataApplicationCapability_application_t38fax,
+		eDataApplicationCapability_application_genericDataCapability,
+	} choice;
+	union {
+		DataProtocolCapability t120;
+	};
+} DataApplicationCapability_application;
+
+typedef struct DataApplicationCapability {	/* SEQUENCE */
+	int options;		/* No use */
+	DataApplicationCapability_application application;
+} DataApplicationCapability;
+
+typedef struct DataType {	/* CHOICE */
+	enum {
+		eDataType_nonStandard,
+		eDataType_nullData,
+		eDataType_videoData,
+		eDataType_audioData,
+		eDataType_data,
+		eDataType_encryptionData,
+		eDataType_h235Control,
+		eDataType_h235Media,
+		eDataType_multiplexedStream,
+	} choice;
+	union {
+		DataApplicationCapability data;
+	};
+} DataType;
+
+typedef struct UnicastAddress_iPAddress {	/* SEQUENCE */
+	int options;		/* No use */
+	unsigned network;
+} UnicastAddress_iPAddress;
+
+typedef struct UnicastAddress_iP6Address {	/* SEQUENCE */
+	int options;		/* No use */
+	unsigned network;
+} UnicastAddress_iP6Address;
+
+typedef struct UnicastAddress {	/* CHOICE */
+	enum {
+		eUnicastAddress_iPAddress,
+		eUnicastAddress_iPXAddress,
+		eUnicastAddress_iP6Address,
+		eUnicastAddress_netBios,
+		eUnicastAddress_iPSourceRouteAddress,
+		eUnicastAddress_nsap,
+		eUnicastAddress_nonStandardAddress,
+	} choice;
+	union {
+		UnicastAddress_iPAddress iPAddress;
+		UnicastAddress_iP6Address iP6Address;
+	};
+} UnicastAddress;
+
+typedef struct H245_TransportAddress {	/* CHOICE */
+	enum {
+		eH245_TransportAddress_unicastAddress,
+		eH245_TransportAddress_multicastAddress,
+	} choice;
+	union {
+		UnicastAddress unicastAddress;
+	};
+} H245_TransportAddress;
+
+typedef struct H2250LogicalChannelParameters {	/* SEQUENCE */
+	enum {
+		eH2250LogicalChannelParameters_nonStandard = (1 << 31),
+		eH2250LogicalChannelParameters_associatedSessionID =
+		    (1 << 30),
+		eH2250LogicalChannelParameters_mediaChannel = (1 << 29),
+		eH2250LogicalChannelParameters_mediaGuaranteedDelivery =
+		    (1 << 28),
+		eH2250LogicalChannelParameters_mediaControlChannel =
+		    (1 << 27),
+		eH2250LogicalChannelParameters_mediaControlGuaranteedDelivery
+		    = (1 << 26),
+		eH2250LogicalChannelParameters_silenceSuppression = (1 << 25),
+		eH2250LogicalChannelParameters_destination = (1 << 24),
+		eH2250LogicalChannelParameters_dynamicRTPPayloadType =
+		    (1 << 23),
+		eH2250LogicalChannelParameters_mediaPacketization = (1 << 22),
+		eH2250LogicalChannelParameters_transportCapability =
+		    (1 << 21),
+		eH2250LogicalChannelParameters_redundancyEncoding = (1 << 20),
+		eH2250LogicalChannelParameters_source = (1 << 19),
+	} options;
+	H245_TransportAddress mediaChannel;
+	H245_TransportAddress mediaControlChannel;
+} H2250LogicalChannelParameters;
+
+typedef struct OpenLogicalChannel_forwardLogicalChannelParameters_multiplexParameters {	/* CHOICE */
+	enum {
+		eOpenLogicalChannel_forwardLogicalChannelParameters_multiplexParameters_h222LogicalChannelParameters,
+		eOpenLogicalChannel_forwardLogicalChannelParameters_multiplexParameters_h223LogicalChannelParameters,
+		eOpenLogicalChannel_forwardLogicalChannelParameters_multiplexParameters_v76LogicalChannelParameters,
+		eOpenLogicalChannel_forwardLogicalChannelParameters_multiplexParameters_h2250LogicalChannelParameters,
+		eOpenLogicalChannel_forwardLogicalChannelParameters_multiplexParameters_none,
+	} choice;
+	union {
+		H2250LogicalChannelParameters h2250LogicalChannelParameters;
+	};
+} OpenLogicalChannel_forwardLogicalChannelParameters_multiplexParameters;
+
+typedef struct OpenLogicalChannel_forwardLogicalChannelParameters {	/* SEQUENCE */
+	enum {
+		eOpenLogicalChannel_forwardLogicalChannelParameters_portNumber
+		    = (1 << 31),
+		eOpenLogicalChannel_forwardLogicalChannelParameters_forwardLogicalChannelDependency
+		    = (1 << 30),
+		eOpenLogicalChannel_forwardLogicalChannelParameters_replacementFor
+		    = (1 << 29),
+	} options;
+	DataType dataType;
+	OpenLogicalChannel_forwardLogicalChannelParameters_multiplexParameters
+	    multiplexParameters;
+} OpenLogicalChannel_forwardLogicalChannelParameters;
+
+typedef struct OpenLogicalChannel_reverseLogicalChannelParameters_multiplexParameters {	/* CHOICE */
+	enum {
+		eOpenLogicalChannel_reverseLogicalChannelParameters_multiplexParameters_h223LogicalChannelParameters,
+		eOpenLogicalChannel_reverseLogicalChannelParameters_multiplexParameters_v76LogicalChannelParameters,
+		eOpenLogicalChannel_reverseLogicalChannelParameters_multiplexParameters_h2250LogicalChannelParameters,
+	} choice;
+	union {
+		H2250LogicalChannelParameters h2250LogicalChannelParameters;
+	};
+} OpenLogicalChannel_reverseLogicalChannelParameters_multiplexParameters;
+
+typedef struct OpenLogicalChannel_reverseLogicalChannelParameters {	/* SEQUENCE */
+	enum {
+		eOpenLogicalChannel_reverseLogicalChannelParameters_multiplexParameters
+		    = (1 << 31),
+		eOpenLogicalChannel_reverseLogicalChannelParameters_reverseLogicalChannelDependency
+		    = (1 << 30),
+		eOpenLogicalChannel_reverseLogicalChannelParameters_replacementFor
+		    = (1 << 29),
+	} options;
+	OpenLogicalChannel_reverseLogicalChannelParameters_multiplexParameters
+	    multiplexParameters;
+} OpenLogicalChannel_reverseLogicalChannelParameters;
+
+typedef struct NetworkAccessParameters_networkAddress {	/* CHOICE */
+	enum {
+		eNetworkAccessParameters_networkAddress_q2931Address,
+		eNetworkAccessParameters_networkAddress_e164Address,
+		eNetworkAccessParameters_networkAddress_localAreaAddress,
+	} choice;
+	union {
+		H245_TransportAddress localAreaAddress;
+	};
+} NetworkAccessParameters_networkAddress;
+
+typedef struct NetworkAccessParameters {	/* SEQUENCE */
+	enum {
+		eNetworkAccessParameters_distribution = (1 << 31),
+		eNetworkAccessParameters_externalReference = (1 << 30),
+		eNetworkAccessParameters_t120SetupProcedure = (1 << 29),
+	} options;
+	NetworkAccessParameters_networkAddress networkAddress;
+} NetworkAccessParameters;
+
+typedef struct OpenLogicalChannel {	/* SEQUENCE */
+	enum {
+		eOpenLogicalChannel_reverseLogicalChannelParameters =
+		    (1 << 31),
+		eOpenLogicalChannel_separateStack = (1 << 30),
+		eOpenLogicalChannel_encryptionSync = (1 << 29),
+	} options;
+	OpenLogicalChannel_forwardLogicalChannelParameters
+	    forwardLogicalChannelParameters;
+	OpenLogicalChannel_reverseLogicalChannelParameters
+	    reverseLogicalChannelParameters;
+	NetworkAccessParameters separateStack;
+} OpenLogicalChannel;
+
+typedef struct Setup_UUIE_fastStart {	/* SEQUENCE OF */
+	int count;
+	OpenLogicalChannel item[30];
+} Setup_UUIE_fastStart;
+
+typedef struct Setup_UUIE {	/* SEQUENCE */
+	enum {
+		eSetup_UUIE_h245Address = (1 << 31),
+		eSetup_UUIE_sourceAddress = (1 << 30),
+		eSetup_UUIE_destinationAddress = (1 << 29),
+		eSetup_UUIE_destCallSignalAddress = (1 << 28),
+		eSetup_UUIE_destExtraCallInfo = (1 << 27),
+		eSetup_UUIE_destExtraCRV = (1 << 26),
+		eSetup_UUIE_callServices = (1 << 25),
+		eSetup_UUIE_sourceCallSignalAddress = (1 << 24),
+		eSetup_UUIE_remoteExtensionAddress = (1 << 23),
+		eSetup_UUIE_callIdentifier = (1 << 22),
+		eSetup_UUIE_h245SecurityCapability = (1 << 21),
+		eSetup_UUIE_tokens = (1 << 20),
+		eSetup_UUIE_cryptoTokens = (1 << 19),
+		eSetup_UUIE_fastStart = (1 << 18),
+		eSetup_UUIE_mediaWaitForConnect = (1 << 17),
+		eSetup_UUIE_canOverlapSend = (1 << 16),
+		eSetup_UUIE_endpointIdentifier = (1 << 15),
+		eSetup_UUIE_multipleCalls = (1 << 14),
+		eSetup_UUIE_maintainConnection = (1 << 13),
+		eSetup_UUIE_connectionParameters = (1 << 12),
+		eSetup_UUIE_language = (1 << 11),
+		eSetup_UUIE_presentationIndicator = (1 << 10),
+		eSetup_UUIE_screeningIndicator = (1 << 9),
+		eSetup_UUIE_serviceControl = (1 << 8),
+		eSetup_UUIE_symmetricOperationRequired = (1 << 7),
+		eSetup_UUIE_capacity = (1 << 6),
+		eSetup_UUIE_circuitInfo = (1 << 5),
+		eSetup_UUIE_desiredProtocols = (1 << 4),
+		eSetup_UUIE_neededFeatures = (1 << 3),
+		eSetup_UUIE_desiredFeatures = (1 << 2),
+		eSetup_UUIE_supportedFeatures = (1 << 1),
+		eSetup_UUIE_parallelH245Control = (1 << 0),
+	} options;
+	TransportAddress h245Address;
+	TransportAddress destCallSignalAddress;
+	TransportAddress sourceCallSignalAddress;
+	Setup_UUIE_fastStart fastStart;
+} Setup_UUIE;
+
+typedef struct CallProceeding_UUIE_fastStart {	/* SEQUENCE OF */
+	int count;
+	OpenLogicalChannel item[30];
+} CallProceeding_UUIE_fastStart;
+
+typedef struct CallProceeding_UUIE {	/* SEQUENCE */
+	enum {
+		eCallProceeding_UUIE_h245Address = (1 << 31),
+		eCallProceeding_UUIE_callIdentifier = (1 << 30),
+		eCallProceeding_UUIE_h245SecurityMode = (1 << 29),
+		eCallProceeding_UUIE_tokens = (1 << 28),
+		eCallProceeding_UUIE_cryptoTokens = (1 << 27),
+		eCallProceeding_UUIE_fastStart = (1 << 26),
+		eCallProceeding_UUIE_multipleCalls = (1 << 25),
+		eCallProceeding_UUIE_maintainConnection = (1 << 24),
+		eCallProceeding_UUIE_fastConnectRefused = (1 << 23),
+		eCallProceeding_UUIE_featureSet = (1 << 22),
+	} options;
+	TransportAddress h245Address;
+	CallProceeding_UUIE_fastStart fastStart;
+} CallProceeding_UUIE;
+
+typedef struct Connect_UUIE_fastStart {	/* SEQUENCE OF */
+	int count;
+	OpenLogicalChannel item[30];
+} Connect_UUIE_fastStart;
+
+typedef struct Connect_UUIE {	/* SEQUENCE */
+	enum {
+		eConnect_UUIE_h245Address = (1 << 31),
+		eConnect_UUIE_callIdentifier = (1 << 30),
+		eConnect_UUIE_h245SecurityMode = (1 << 29),
+		eConnect_UUIE_tokens = (1 << 28),
+		eConnect_UUIE_cryptoTokens = (1 << 27),
+		eConnect_UUIE_fastStart = (1 << 26),
+		eConnect_UUIE_multipleCalls = (1 << 25),
+		eConnect_UUIE_maintainConnection = (1 << 24),
+		eConnect_UUIE_language = (1 << 23),
+		eConnect_UUIE_connectedAddress = (1 << 22),
+		eConnect_UUIE_presentationIndicator = (1 << 21),
+		eConnect_UUIE_screeningIndicator = (1 << 20),
+		eConnect_UUIE_fastConnectRefused = (1 << 19),
+		eConnect_UUIE_serviceControl = (1 << 18),
+		eConnect_UUIE_capacity = (1 << 17),
+		eConnect_UUIE_featureSet = (1 << 16),
+	} options;
+	TransportAddress h245Address;
+	Connect_UUIE_fastStart fastStart;
+} Connect_UUIE;
+
+typedef struct Alerting_UUIE_fastStart {	/* SEQUENCE OF */
+	int count;
+	OpenLogicalChannel item[30];
+} Alerting_UUIE_fastStart;
+
+typedef struct Alerting_UUIE {	/* SEQUENCE */
+	enum {
+		eAlerting_UUIE_h245Address = (1 << 31),
+		eAlerting_UUIE_callIdentifier = (1 << 30),
+		eAlerting_UUIE_h245SecurityMode = (1 << 29),
+		eAlerting_UUIE_tokens = (1 << 28),
+		eAlerting_UUIE_cryptoTokens = (1 << 27),
+		eAlerting_UUIE_fastStart = (1 << 26),
+		eAlerting_UUIE_multipleCalls = (1 << 25),
+		eAlerting_UUIE_maintainConnection = (1 << 24),
+		eAlerting_UUIE_alertingAddress = (1 << 23),
+		eAlerting_UUIE_presentationIndicator = (1 << 22),
+		eAlerting_UUIE_screeningIndicator = (1 << 21),
+		eAlerting_UUIE_fastConnectRefused = (1 << 20),
+		eAlerting_UUIE_serviceControl = (1 << 19),
+		eAlerting_UUIE_capacity = (1 << 18),
+		eAlerting_UUIE_featureSet = (1 << 17),
+	} options;
+	TransportAddress h245Address;
+	Alerting_UUIE_fastStart fastStart;
+} Alerting_UUIE;
+
+typedef struct FacilityReason {	/* CHOICE */
+	enum {
+		eFacilityReason_routeCallToGatekeeper,
+		eFacilityReason_callForwarded,
+		eFacilityReason_routeCallToMC,
+		eFacilityReason_undefinedReason,
+		eFacilityReason_conferenceListChoice,
+		eFacilityReason_startH245,
+		eFacilityReason_noH245,
+		eFacilityReason_newTokens,
+		eFacilityReason_featureSetUpdate,
+		eFacilityReason_forwardedElements,
+		eFacilityReason_transportedInformation,
+	} choice;
+} FacilityReason;
+
+typedef struct Facility_UUIE_fastStart {	/* SEQUENCE OF */
+	int count;
+	OpenLogicalChannel item[30];
+} Facility_UUIE_fastStart;
+
+typedef struct Facility_UUIE {	/* SEQUENCE */
+	enum {
+		eFacility_UUIE_alternativeAddress = (1 << 31),
+		eFacility_UUIE_alternativeAliasAddress = (1 << 30),
+		eFacility_UUIE_conferenceID = (1 << 29),
+		eFacility_UUIE_callIdentifier = (1 << 28),
+		eFacility_UUIE_destExtraCallInfo = (1 << 27),
+		eFacility_UUIE_remoteExtensionAddress = (1 << 26),
+		eFacility_UUIE_tokens = (1 << 25),
+		eFacility_UUIE_cryptoTokens = (1 << 24),
+		eFacility_UUIE_conferences = (1 << 23),
+		eFacility_UUIE_h245Address = (1 << 22),
+		eFacility_UUIE_fastStart = (1 << 21),
+		eFacility_UUIE_multipleCalls = (1 << 20),
+		eFacility_UUIE_maintainConnection = (1 << 19),
+		eFacility_UUIE_fastConnectRefused = (1 << 18),
+		eFacility_UUIE_serviceControl = (1 << 17),
+		eFacility_UUIE_circuitInfo = (1 << 16),
+		eFacility_UUIE_featureSet = (1 << 15),
+		eFacility_UUIE_destinationInfo = (1 << 14),
+		eFacility_UUIE_h245SecurityMode = (1 << 13),
+	} options;
+	TransportAddress alternativeAddress;
+	FacilityReason reason;
+	TransportAddress h245Address;
+	Facility_UUIE_fastStart fastStart;
+} Facility_UUIE;
+
+typedef struct Progress_UUIE_fastStart {	/* SEQUENCE OF */
+	int count;
+	OpenLogicalChannel item[30];
+} Progress_UUIE_fastStart;
+
+typedef struct Progress_UUIE {	/* SEQUENCE */
+	enum {
+		eProgress_UUIE_h245Address = (1 << 31),
+		eProgress_UUIE_h245SecurityMode = (1 << 30),
+		eProgress_UUIE_tokens = (1 << 29),
+		eProgress_UUIE_cryptoTokens = (1 << 28),
+		eProgress_UUIE_fastStart = (1 << 27),
+		eProgress_UUIE_multipleCalls = (1 << 26),
+		eProgress_UUIE_maintainConnection = (1 << 25),
+		eProgress_UUIE_fastConnectRefused = (1 << 24),
+	} options;
+	TransportAddress h245Address;
+	Progress_UUIE_fastStart fastStart;
+} Progress_UUIE;
+
+typedef struct H323_UU_PDU_h323_message_body {	/* CHOICE */
+	enum {
+		eH323_UU_PDU_h323_message_body_setup,
+		eH323_UU_PDU_h323_message_body_callProceeding,
+		eH323_UU_PDU_h323_message_body_connect,
+		eH323_UU_PDU_h323_message_body_alerting,
+		eH323_UU_PDU_h323_message_body_information,
+		eH323_UU_PDU_h323_message_body_releaseComplete,
+		eH323_UU_PDU_h323_message_body_facility,
+		eH323_UU_PDU_h323_message_body_progress,
+		eH323_UU_PDU_h323_message_body_empty,
+		eH323_UU_PDU_h323_message_body_status,
+		eH323_UU_PDU_h323_message_body_statusInquiry,
+		eH323_UU_PDU_h323_message_body_setupAcknowledge,
+		eH323_UU_PDU_h323_message_body_notify,
+	} choice;
+	union {
+		Setup_UUIE setup;
+		CallProceeding_UUIE callProceeding;
+		Connect_UUIE connect;
+		Alerting_UUIE alerting;
+		Facility_UUIE facility;
+		Progress_UUIE progress;
+	};
+} H323_UU_PDU_h323_message_body;
+
+typedef struct RequestMessage {	/* CHOICE */
+	enum {
+		eRequestMessage_nonStandard,
+		eRequestMessage_masterSlaveDetermination,
+		eRequestMessage_terminalCapabilitySet,
+		eRequestMessage_openLogicalChannel,
+		eRequestMessage_closeLogicalChannel,
+		eRequestMessage_requestChannelClose,
+		eRequestMessage_multiplexEntrySend,
+		eRequestMessage_requestMultiplexEntry,
+		eRequestMessage_requestMode,
+		eRequestMessage_roundTripDelayRequest,
+		eRequestMessage_maintenanceLoopRequest,
+		eRequestMessage_communicationModeRequest,
+		eRequestMessage_conferenceRequest,
+		eRequestMessage_multilinkRequest,
+		eRequestMessage_logicalChannelRateRequest,
+	} choice;
+	union {
+		OpenLogicalChannel openLogicalChannel;
+	};
+} RequestMessage;
+
+typedef struct OpenLogicalChannelAck_reverseLogicalChannelParameters_multiplexParameters {	/* CHOICE */
+	enum {
+		eOpenLogicalChannelAck_reverseLogicalChannelParameters_multiplexParameters_h222LogicalChannelParameters,
+		eOpenLogicalChannelAck_reverseLogicalChannelParameters_multiplexParameters_h2250LogicalChannelParameters,
+	} choice;
+	union {
+		H2250LogicalChannelParameters h2250LogicalChannelParameters;
+	};
+} OpenLogicalChannelAck_reverseLogicalChannelParameters_multiplexParameters;
+
+typedef struct OpenLogicalChannelAck_reverseLogicalChannelParameters {	/* SEQUENCE */
+	enum {
+		eOpenLogicalChannelAck_reverseLogicalChannelParameters_portNumber
+		    = (1 << 31),
+		eOpenLogicalChannelAck_reverseLogicalChannelParameters_multiplexParameters
+		    = (1 << 30),
+		eOpenLogicalChannelAck_reverseLogicalChannelParameters_replacementFor
+		    = (1 << 29),
+	} options;
+	OpenLogicalChannelAck_reverseLogicalChannelParameters_multiplexParameters
+	    multiplexParameters;
+} OpenLogicalChannelAck_reverseLogicalChannelParameters;
+
+typedef struct H2250LogicalChannelAckParameters {	/* SEQUENCE */
+	enum {
+		eH2250LogicalChannelAckParameters_nonStandard = (1 << 31),
+		eH2250LogicalChannelAckParameters_sessionID = (1 << 30),
+		eH2250LogicalChannelAckParameters_mediaChannel = (1 << 29),
+		eH2250LogicalChannelAckParameters_mediaControlChannel =
+		    (1 << 28),
+		eH2250LogicalChannelAckParameters_dynamicRTPPayloadType =
+		    (1 << 27),
+		eH2250LogicalChannelAckParameters_flowControlToZero =
+		    (1 << 26),
+		eH2250LogicalChannelAckParameters_portNumber = (1 << 25),
+	} options;
+	H245_TransportAddress mediaChannel;
+	H245_TransportAddress mediaControlChannel;
+} H2250LogicalChannelAckParameters;
+
+typedef struct OpenLogicalChannelAck_forwardMultiplexAckParameters {	/* CHOICE */
+	enum {
+		eOpenLogicalChannelAck_forwardMultiplexAckParameters_h2250LogicalChannelAckParameters,
+	} choice;
+	union {
+		H2250LogicalChannelAckParameters
+		    h2250LogicalChannelAckParameters;
+	};
+} OpenLogicalChannelAck_forwardMultiplexAckParameters;
+
+typedef struct OpenLogicalChannelAck {	/* SEQUENCE */
+	enum {
+		eOpenLogicalChannelAck_reverseLogicalChannelParameters =
+		    (1 << 31),
+		eOpenLogicalChannelAck_separateStack = (1 << 30),
+		eOpenLogicalChannelAck_forwardMultiplexAckParameters =
+		    (1 << 29),
+		eOpenLogicalChannelAck_encryptionSync = (1 << 28),
+	} options;
+	OpenLogicalChannelAck_reverseLogicalChannelParameters
+	    reverseLogicalChannelParameters;
+	NetworkAccessParameters separateStack;
+	OpenLogicalChannelAck_forwardMultiplexAckParameters
+	    forwardMultiplexAckParameters;
+} OpenLogicalChannelAck;
+
+typedef struct ResponseMessage {	/* CHOICE */
+	enum {
+		eResponseMessage_nonStandard,
+		eResponseMessage_masterSlaveDeterminationAck,
+		eResponseMessage_masterSlaveDeterminationReject,
+		eResponseMessage_terminalCapabilitySetAck,
+		eResponseMessage_terminalCapabilitySetReject,
+		eResponseMessage_openLogicalChannelAck,
+		eResponseMessage_openLogicalChannelReject,
+		eResponseMessage_closeLogicalChannelAck,
+		eResponseMessage_requestChannelCloseAck,
+		eResponseMessage_requestChannelCloseReject,
+		eResponseMessage_multiplexEntrySendAck,
+		eResponseMessage_multiplexEntrySendReject,
+		eResponseMessage_requestMultiplexEntryAck,
+		eResponseMessage_requestMultiplexEntryReject,
+		eResponseMessage_requestModeAck,
+		eResponseMessage_requestModeReject,
+		eResponseMessage_roundTripDelayResponse,
+		eResponseMessage_maintenanceLoopAck,
+		eResponseMessage_maintenanceLoopReject,
+		eResponseMessage_communicationModeResponse,
+		eResponseMessage_conferenceResponse,
+		eResponseMessage_multilinkResponse,
+		eResponseMessage_logicalChannelRateAcknowledge,
+		eResponseMessage_logicalChannelRateReject,
+	} choice;
+	union {
+		OpenLogicalChannelAck openLogicalChannelAck;
+	};
+} ResponseMessage;
+
+typedef struct MultimediaSystemControlMessage {	/* CHOICE */
+	enum {
+		eMultimediaSystemControlMessage_request,
+		eMultimediaSystemControlMessage_response,
+		eMultimediaSystemControlMessage_command,
+		eMultimediaSystemControlMessage_indication,
+	} choice;
+	union {
+		RequestMessage request;
+		ResponseMessage response;
+	};
+} MultimediaSystemControlMessage;
+
+typedef struct H323_UU_PDU_h245Control {	/* SEQUENCE OF */
+	int count;
+	MultimediaSystemControlMessage item[4];
+} H323_UU_PDU_h245Control;
+
+typedef struct H323_UU_PDU {	/* SEQUENCE */
+	enum {
+		eH323_UU_PDU_nonStandardData = (1 << 31),
+		eH323_UU_PDU_h4501SupplementaryService = (1 << 30),
+		eH323_UU_PDU_h245Tunneling = (1 << 29),
+		eH323_UU_PDU_h245Control = (1 << 28),
+		eH323_UU_PDU_nonStandardControl = (1 << 27),
+		eH323_UU_PDU_callLinkage = (1 << 26),
+		eH323_UU_PDU_tunnelledSignallingMessage = (1 << 25),
+		eH323_UU_PDU_provisionalRespToH245Tunneling = (1 << 24),
+		eH323_UU_PDU_stimulusControl = (1 << 23),
+		eH323_UU_PDU_genericData = (1 << 22),
+	} options;
+	H323_UU_PDU_h323_message_body h323_message_body;
+	H323_UU_PDU_h245Control h245Control;
+} H323_UU_PDU;
+
+typedef struct H323_UserInformation {	/* SEQUENCE */
+	enum {
+		eH323_UserInformation_user_data = (1 << 31),
+	} options;
+	H323_UU_PDU h323_uu_pdu;
+} H323_UserInformation;
+
+typedef struct GatekeeperRequest {	/* SEQUENCE */
+	enum {
+		eGatekeeperRequest_nonStandardData = (1 << 31),
+		eGatekeeperRequest_gatekeeperIdentifier = (1 << 30),
+		eGatekeeperRequest_callServices = (1 << 29),
+		eGatekeeperRequest_endpointAlias = (1 << 28),
+		eGatekeeperRequest_alternateEndpoints = (1 << 27),
+		eGatekeeperRequest_tokens = (1 << 26),
+		eGatekeeperRequest_cryptoTokens = (1 << 25),
+		eGatekeeperRequest_authenticationCapability = (1 << 24),
+		eGatekeeperRequest_algorithmOIDs = (1 << 23),
+		eGatekeeperRequest_integrity = (1 << 22),
+		eGatekeeperRequest_integrityCheckValue = (1 << 21),
+		eGatekeeperRequest_supportsAltGK = (1 << 20),
+		eGatekeeperRequest_featureSet = (1 << 19),
+		eGatekeeperRequest_genericData = (1 << 18),
+	} options;
+	TransportAddress rasAddress;
+} GatekeeperRequest;
+
+typedef struct GatekeeperConfirm {	/* SEQUENCE */
+	enum {
+		eGatekeeperConfirm_nonStandardData = (1 << 31),
+		eGatekeeperConfirm_gatekeeperIdentifier = (1 << 30),
+		eGatekeeperConfirm_alternateGatekeeper = (1 << 29),
+		eGatekeeperConfirm_authenticationMode = (1 << 28),
+		eGatekeeperConfirm_tokens = (1 << 27),
+		eGatekeeperConfirm_cryptoTokens = (1 << 26),
+		eGatekeeperConfirm_algorithmOID = (1 << 25),
+		eGatekeeperConfirm_integrity = (1 << 24),
+		eGatekeeperConfirm_integrityCheckValue = (1 << 23),
+		eGatekeeperConfirm_featureSet = (1 << 22),
+		eGatekeeperConfirm_genericData = (1 << 21),
+	} options;
+	TransportAddress rasAddress;
+} GatekeeperConfirm;
+
+typedef struct RegistrationRequest_callSignalAddress {	/* SEQUENCE OF */
+	int count;
+	TransportAddress item[10];
+} RegistrationRequest_callSignalAddress;
+
+typedef struct RegistrationRequest_rasAddress {	/* SEQUENCE OF */
+	int count;
+	TransportAddress item[10];
+} RegistrationRequest_rasAddress;
+
+typedef struct RegistrationRequest {	/* SEQUENCE */
+	enum {
+		eRegistrationRequest_nonStandardData = (1 << 31),
+		eRegistrationRequest_terminalAlias = (1 << 30),
+		eRegistrationRequest_gatekeeperIdentifier = (1 << 29),
+		eRegistrationRequest_alternateEndpoints = (1 << 28),
+		eRegistrationRequest_timeToLive = (1 << 27),
+		eRegistrationRequest_tokens = (1 << 26),
+		eRegistrationRequest_cryptoTokens = (1 << 25),
+		eRegistrationRequest_integrityCheckValue = (1 << 24),
+		eRegistrationRequest_keepAlive = (1 << 23),
+		eRegistrationRequest_endpointIdentifier = (1 << 22),
+		eRegistrationRequest_willSupplyUUIEs = (1 << 21),
+		eRegistrationRequest_maintainConnection = (1 << 20),
+		eRegistrationRequest_alternateTransportAddresses = (1 << 19),
+		eRegistrationRequest_additiveRegistration = (1 << 18),
+		eRegistrationRequest_terminalAliasPattern = (1 << 17),
+		eRegistrationRequest_supportsAltGK = (1 << 16),
+		eRegistrationRequest_usageReportingCapability = (1 << 15),
+		eRegistrationRequest_multipleCalls = (1 << 14),
+		eRegistrationRequest_supportedH248Packages = (1 << 13),
+		eRegistrationRequest_callCreditCapability = (1 << 12),
+		eRegistrationRequest_capacityReportingCapability = (1 << 11),
+		eRegistrationRequest_capacity = (1 << 10),
+		eRegistrationRequest_featureSet = (1 << 9),
+		eRegistrationRequest_genericData = (1 << 8),
+	} options;
+	RegistrationRequest_callSignalAddress callSignalAddress;
+	RegistrationRequest_rasAddress rasAddress;
+	unsigned timeToLive;
+} RegistrationRequest;
+
+typedef struct RegistrationConfirm_callSignalAddress {	/* SEQUENCE OF */
+	int count;
+	TransportAddress item[10];
+} RegistrationConfirm_callSignalAddress;
+
+typedef struct RegistrationConfirm {	/* SEQUENCE */
+	enum {
+		eRegistrationConfirm_nonStandardData = (1 << 31),
+		eRegistrationConfirm_terminalAlias = (1 << 30),
+		eRegistrationConfirm_gatekeeperIdentifier = (1 << 29),
+		eRegistrationConfirm_alternateGatekeeper = (1 << 28),
+		eRegistrationConfirm_timeToLive = (1 << 27),
+		eRegistrationConfirm_tokens = (1 << 26),
+		eRegistrationConfirm_cryptoTokens = (1 << 25),
+		eRegistrationConfirm_integrityCheckValue = (1 << 24),
+		eRegistrationConfirm_willRespondToIRR = (1 << 23),
+		eRegistrationConfirm_preGrantedARQ = (1 << 22),
+		eRegistrationConfirm_maintainConnection = (1 << 21),
+		eRegistrationConfirm_serviceControl = (1 << 20),
+		eRegistrationConfirm_supportsAdditiveRegistration = (1 << 19),
+		eRegistrationConfirm_terminalAliasPattern = (1 << 18),
+		eRegistrationConfirm_supportedPrefixes = (1 << 17),
+		eRegistrationConfirm_usageSpec = (1 << 16),
+		eRegistrationConfirm_featureServerAlias = (1 << 15),
+		eRegistrationConfirm_capacityReportingSpec = (1 << 14),
+		eRegistrationConfirm_featureSet = (1 << 13),
+		eRegistrationConfirm_genericData = (1 << 12),
+	} options;
+	RegistrationConfirm_callSignalAddress callSignalAddress;
+	unsigned timeToLive;
+} RegistrationConfirm;
+
+typedef struct UnregistrationRequest_callSignalAddress {	/* SEQUENCE OF */
+	int count;
+	TransportAddress item[10];
+} UnregistrationRequest_callSignalAddress;
+
+typedef struct UnregistrationRequest {	/* SEQUENCE */
+	enum {
+		eUnregistrationRequest_endpointAlias = (1 << 31),
+		eUnregistrationRequest_nonStandardData = (1 << 30),
+		eUnregistrationRequest_endpointIdentifier = (1 << 29),
+		eUnregistrationRequest_alternateEndpoints = (1 << 28),
+		eUnregistrationRequest_gatekeeperIdentifier = (1 << 27),
+		eUnregistrationRequest_tokens = (1 << 26),
+		eUnregistrationRequest_cryptoTokens = (1 << 25),
+		eUnregistrationRequest_integrityCheckValue = (1 << 24),
+		eUnregistrationRequest_reason = (1 << 23),
+		eUnregistrationRequest_endpointAliasPattern = (1 << 22),
+		eUnregistrationRequest_supportedPrefixes = (1 << 21),
+		eUnregistrationRequest_alternateGatekeeper = (1 << 20),
+		eUnregistrationRequest_genericData = (1 << 19),
+	} options;
+	UnregistrationRequest_callSignalAddress callSignalAddress;
+} UnregistrationRequest;
+
+typedef struct AdmissionRequest {	/* SEQUENCE */
+	enum {
+		eAdmissionRequest_callModel = (1 << 31),
+		eAdmissionRequest_destinationInfo = (1 << 30),
+		eAdmissionRequest_destCallSignalAddress = (1 << 29),
+		eAdmissionRequest_destExtraCallInfo = (1 << 28),
+		eAdmissionRequest_srcCallSignalAddress = (1 << 27),
+		eAdmissionRequest_nonStandardData = (1 << 26),
+		eAdmissionRequest_callServices = (1 << 25),
+		eAdmissionRequest_canMapAlias = (1 << 24),
+		eAdmissionRequest_callIdentifier = (1 << 23),
+		eAdmissionRequest_srcAlternatives = (1 << 22),
+		eAdmissionRequest_destAlternatives = (1 << 21),
+		eAdmissionRequest_gatekeeperIdentifier = (1 << 20),
+		eAdmissionRequest_tokens = (1 << 19),
+		eAdmissionRequest_cryptoTokens = (1 << 18),
+		eAdmissionRequest_integrityCheckValue = (1 << 17),
+		eAdmissionRequest_transportQOS = (1 << 16),
+		eAdmissionRequest_willSupplyUUIEs = (1 << 15),
+		eAdmissionRequest_callLinkage = (1 << 14),
+		eAdmissionRequest_gatewayDataRate = (1 << 13),
+		eAdmissionRequest_capacity = (1 << 12),
+		eAdmissionRequest_circuitInfo = (1 << 11),
+		eAdmissionRequest_desiredProtocols = (1 << 10),
+		eAdmissionRequest_desiredTunnelledProtocol = (1 << 9),
+		eAdmissionRequest_featureSet = (1 << 8),
+		eAdmissionRequest_genericData = (1 << 7),
+	} options;
+	TransportAddress destCallSignalAddress;
+	TransportAddress srcCallSignalAddress;
+} AdmissionRequest;
+
+typedef struct AdmissionConfirm {	/* SEQUENCE */
+	enum {
+		eAdmissionConfirm_irrFrequency = (1 << 31),
+		eAdmissionConfirm_nonStandardData = (1 << 30),
+		eAdmissionConfirm_destinationInfo = (1 << 29),
+		eAdmissionConfirm_destExtraCallInfo = (1 << 28),
+		eAdmissionConfirm_destinationType = (1 << 27),
+		eAdmissionConfirm_remoteExtensionAddress = (1 << 26),
+		eAdmissionConfirm_alternateEndpoints = (1 << 25),
+		eAdmissionConfirm_tokens = (1 << 24),
+		eAdmissionConfirm_cryptoTokens = (1 << 23),
+		eAdmissionConfirm_integrityCheckValue = (1 << 22),
+		eAdmissionConfirm_transportQOS = (1 << 21),
+		eAdmissionConfirm_willRespondToIRR = (1 << 20),
+		eAdmissionConfirm_uuiesRequested = (1 << 19),
+		eAdmissionConfirm_language = (1 << 18),
+		eAdmissionConfirm_alternateTransportAddresses = (1 << 17),
+		eAdmissionConfirm_useSpecifiedTransport = (1 << 16),
+		eAdmissionConfirm_circuitInfo = (1 << 15),
+		eAdmissionConfirm_usageSpec = (1 << 14),
+		eAdmissionConfirm_supportedProtocols = (1 << 13),
+		eAdmissionConfirm_serviceControl = (1 << 12),
+		eAdmissionConfirm_multipleCalls = (1 << 11),
+		eAdmissionConfirm_featureSet = (1 << 10),
+		eAdmissionConfirm_genericData = (1 << 9),
+	} options;
+	TransportAddress destCallSignalAddress;
+} AdmissionConfirm;
+
+typedef struct LocationRequest {	/* SEQUENCE */
+	enum {
+		eLocationRequest_endpointIdentifier = (1 << 31),
+		eLocationRequest_nonStandardData = (1 << 30),
+		eLocationRequest_sourceInfo = (1 << 29),
+		eLocationRequest_canMapAlias = (1 << 28),
+		eLocationRequest_gatekeeperIdentifier = (1 << 27),
+		eLocationRequest_tokens = (1 << 26),
+		eLocationRequest_cryptoTokens = (1 << 25),
+		eLocationRequest_integrityCheckValue = (1 << 24),
+		eLocationRequest_desiredProtocols = (1 << 23),
+		eLocationRequest_desiredTunnelledProtocol = (1 << 22),
+		eLocationRequest_featureSet = (1 << 21),
+		eLocationRequest_genericData = (1 << 20),
+		eLocationRequest_hopCount = (1 << 19),
+		eLocationRequest_circuitInfo = (1 << 18),
+	} options;
+	TransportAddress replyAddress;
+} LocationRequest;
+
+typedef struct LocationConfirm {	/* SEQUENCE */
+	enum {
+		eLocationConfirm_nonStandardData = (1 << 31),
+		eLocationConfirm_destinationInfo = (1 << 30),
+		eLocationConfirm_destExtraCallInfo = (1 << 29),
+		eLocationConfirm_destinationType = (1 << 28),
+		eLocationConfirm_remoteExtensionAddress = (1 << 27),
+		eLocationConfirm_alternateEndpoints = (1 << 26),
+		eLocationConfirm_tokens = (1 << 25),
+		eLocationConfirm_cryptoTokens = (1 << 24),
+		eLocationConfirm_integrityCheckValue = (1 << 23),
+		eLocationConfirm_alternateTransportAddresses = (1 << 22),
+		eLocationConfirm_supportedProtocols = (1 << 21),
+		eLocationConfirm_multipleCalls = (1 << 20),
+		eLocationConfirm_featureSet = (1 << 19),
+		eLocationConfirm_genericData = (1 << 18),
+		eLocationConfirm_circuitInfo = (1 << 17),
+		eLocationConfirm_serviceControl = (1 << 16),
+	} options;
+	TransportAddress callSignalAddress;
+	TransportAddress rasAddress;
+} LocationConfirm;
+
+typedef struct InfoRequestResponse_callSignalAddress {	/* SEQUENCE OF */
+	int count;
+	TransportAddress item[10];
+} InfoRequestResponse_callSignalAddress;
+
+typedef struct InfoRequestResponse {	/* SEQUENCE */
+	enum {
+		eInfoRequestResponse_nonStandardData = (1 << 31),
+		eInfoRequestResponse_endpointAlias = (1 << 30),
+		eInfoRequestResponse_perCallInfo = (1 << 29),
+		eInfoRequestResponse_tokens = (1 << 28),
+		eInfoRequestResponse_cryptoTokens = (1 << 27),
+		eInfoRequestResponse_integrityCheckValue = (1 << 26),
+		eInfoRequestResponse_needResponse = (1 << 25),
+		eInfoRequestResponse_capacity = (1 << 24),
+		eInfoRequestResponse_irrStatus = (1 << 23),
+		eInfoRequestResponse_unsolicited = (1 << 22),
+		eInfoRequestResponse_genericData = (1 << 21),
+	} options;
+	TransportAddress rasAddress;
+	InfoRequestResponse_callSignalAddress callSignalAddress;
+} InfoRequestResponse;
+
+typedef struct RasMessage {	/* CHOICE */
+	enum {
+		eRasMessage_gatekeeperRequest,
+		eRasMessage_gatekeeperConfirm,
+		eRasMessage_gatekeeperReject,
+		eRasMessage_registrationRequest,
+		eRasMessage_registrationConfirm,
+		eRasMessage_registrationReject,
+		eRasMessage_unregistrationRequest,
+		eRasMessage_unregistrationConfirm,
+		eRasMessage_unregistrationReject,
+		eRasMessage_admissionRequest,
+		eRasMessage_admissionConfirm,
+		eRasMessage_admissionReject,
+		eRasMessage_bandwidthRequest,
+		eRasMessage_bandwidthConfirm,
+		eRasMessage_bandwidthReject,
+		eRasMessage_disengageRequest,
+		eRasMessage_disengageConfirm,
+		eRasMessage_disengageReject,
+		eRasMessage_locationRequest,
+		eRasMessage_locationConfirm,
+		eRasMessage_locationReject,
+		eRasMessage_infoRequest,
+		eRasMessage_infoRequestResponse,
+		eRasMessage_nonStandardMessage,
+		eRasMessage_unknownMessageResponse,
+		eRasMessage_requestInProgress,
+		eRasMessage_resourcesAvailableIndicate,
+		eRasMessage_resourcesAvailableConfirm,
+		eRasMessage_infoRequestAck,
+		eRasMessage_infoRequestNak,
+		eRasMessage_serviceControlIndication,
+		eRasMessage_serviceControlResponse,
+	} choice;
+	union {
+		GatekeeperRequest gatekeeperRequest;
+		GatekeeperConfirm gatekeeperConfirm;
+		RegistrationRequest registrationRequest;
+		RegistrationConfirm registrationConfirm;
+		UnregistrationRequest unregistrationRequest;
+		AdmissionRequest admissionRequest;
+		AdmissionConfirm admissionConfirm;
+		LocationRequest locationRequest;
+		LocationConfirm locationConfirm;
+		InfoRequestResponse infoRequestResponse;
+	};
+} RasMessage;
diff --git a/include/linux/netfilter/nf_conntrack_irc.h b/include/linux/netfilter/nf_conntrack_irc.h
new file mode 100644
index 00000000..36282bf7
--- /dev/null
+++ b/include/linux/netfilter/nf_conntrack_irc.h
@@ -0,0 +1,15 @@
+#ifndef _NF_CONNTRACK_IRC_H
+#define _NF_CONNTRACK_IRC_H
+
+#ifdef __KERNEL__
+
+#define IRC_PORT	6667
+
+extern unsigned int (*nf_nat_irc_hook)(struct sk_buff *skb,
+				       enum ip_conntrack_info ctinfo,
+				       unsigned int matchoff,
+				       unsigned int matchlen,
+				       struct nf_conntrack_expect *exp);
+
+#endif /* __KERNEL__ */
+#endif /* _NF_CONNTRACK_IRC_H */
diff --git a/include/linux/netfilter/nf_conntrack_pptp.h b/include/linux/netfilter/nf_conntrack_pptp.h
new file mode 100644
index 00000000..3bbde0c3
--- /dev/null
+++ b/include/linux/netfilter/nf_conntrack_pptp.h
@@ -0,0 +1,324 @@
+/* PPTP constants and structs */
+#ifndef _NF_CONNTRACK_PPTP_H
+#define _NF_CONNTRACK_PPTP_H
+
+#include <linux/netfilter/nf_conntrack_common.h>
+
+extern const char *const pptp_msg_name[];
+
+/* state of the control session */
+enum pptp_ctrlsess_state {
+	PPTP_SESSION_NONE,			/* no session present */
+	PPTP_SESSION_ERROR,			/* some session error */
+	PPTP_SESSION_STOPREQ,			/* stop_sess request seen */
+	PPTP_SESSION_REQUESTED,			/* start_sess request seen */
+	PPTP_SESSION_CONFIRMED,			/* session established */
+};
+
+/* state of the call inside the control session */
+enum pptp_ctrlcall_state {
+	PPTP_CALL_NONE,
+	PPTP_CALL_ERROR,
+	PPTP_CALL_OUT_REQ,
+	PPTP_CALL_OUT_CONF,
+	PPTP_CALL_IN_REQ,
+	PPTP_CALL_IN_REP,
+	PPTP_CALL_IN_CONF,
+	PPTP_CALL_CLEAR_REQ,
+};
+
+/* conntrack private data */
+struct nf_ct_pptp_master {
+	enum pptp_ctrlsess_state sstate;	/* session state */
+	enum pptp_ctrlcall_state cstate;	/* call state */
+	__be16 pac_call_id;			/* call id of PAC */
+	__be16 pns_call_id;			/* call id of PNS */
+
+	/* in pre-2.6.11 this used to be per-expect. Now it is per-conntrack
+	 * and therefore imposes a fixed limit on the number of maps */
+	struct nf_ct_gre_keymap *keymap[IP_CT_DIR_MAX];
+};
+
+struct nf_nat_pptp {
+	__be16 pns_call_id;			/* NAT'ed PNS call id */
+	__be16 pac_call_id;			/* NAT'ed PAC call id */
+};
+
+#ifdef __KERNEL__
+
+#define PPTP_CONTROL_PORT	1723
+
+#define PPTP_PACKET_CONTROL	1
+#define PPTP_PACKET_MGMT	2
+
+#define PPTP_MAGIC_COOKIE	0x1a2b3c4d
+
+struct pptp_pkt_hdr {
+	__u16	packetLength;
+	__be16	packetType;
+	__be32	magicCookie;
+};
+
+/* PptpControlMessageType values */
+#define PPTP_START_SESSION_REQUEST	1
+#define PPTP_START_SESSION_REPLY	2
+#define PPTP_STOP_SESSION_REQUEST	3
+#define PPTP_STOP_SESSION_REPLY		4
+#define PPTP_ECHO_REQUEST		5
+#define PPTP_ECHO_REPLY			6
+#define PPTP_OUT_CALL_REQUEST		7
+#define PPTP_OUT_CALL_REPLY		8
+#define PPTP_IN_CALL_REQUEST		9
+#define PPTP_IN_CALL_REPLY		10
+#define PPTP_IN_CALL_CONNECT		11
+#define PPTP_CALL_CLEAR_REQUEST		12
+#define PPTP_CALL_DISCONNECT_NOTIFY	13
+#define PPTP_WAN_ERROR_NOTIFY		14
+#define PPTP_SET_LINK_INFO		15
+
+#define PPTP_MSG_MAX			15
+
+/* PptpGeneralError values */
+#define PPTP_ERROR_CODE_NONE		0
+#define PPTP_NOT_CONNECTED		1
+#define PPTP_BAD_FORMAT			2
+#define PPTP_BAD_VALUE			3
+#define PPTP_NO_RESOURCE		4
+#define PPTP_BAD_CALLID			5
+#define PPTP_REMOVE_DEVICE_ERROR	6
+
+struct PptpControlHeader {
+	__be16	messageType;
+	__u16	reserved;
+};
+
+/* FramingCapability Bitmap Values */
+#define PPTP_FRAME_CAP_ASYNC		0x1
+#define PPTP_FRAME_CAP_SYNC		0x2
+
+/* BearerCapability Bitmap Values */
+#define PPTP_BEARER_CAP_ANALOG		0x1
+#define PPTP_BEARER_CAP_DIGITAL		0x2
+
+struct PptpStartSessionRequest {
+	__be16	protocolVersion;
+	__u16	reserved1;
+	__be32	framingCapability;
+	__be32	bearerCapability;
+	__be16	maxChannels;
+	__be16	firmwareRevision;
+	__u8	hostName[64];
+	__u8	vendorString[64];
+};
+
+/* PptpStartSessionResultCode Values */
+#define PPTP_START_OK			1
+#define PPTP_START_GENERAL_ERROR	2
+#define PPTP_START_ALREADY_CONNECTED	3
+#define PPTP_START_NOT_AUTHORIZED	4
+#define PPTP_START_UNKNOWN_PROTOCOL	5
+
+struct PptpStartSessionReply {
+	__be16	protocolVersion;
+	__u8	resultCode;
+	__u8	generalErrorCode;
+	__be32	framingCapability;
+	__be32	bearerCapability;
+	__be16	maxChannels;
+	__be16	firmwareRevision;
+	__u8	hostName[64];
+	__u8	vendorString[64];
+};
+
+/* PptpStopReasons */
+#define PPTP_STOP_NONE			1
+#define PPTP_STOP_PROTOCOL		2
+#define PPTP_STOP_LOCAL_SHUTDOWN	3
+
+struct PptpStopSessionRequest {
+	__u8	reason;
+	__u8	reserved1;
+	__u16	reserved2;
+};
+
+/* PptpStopSessionResultCode */
+#define PPTP_STOP_OK			1
+#define PPTP_STOP_GENERAL_ERROR		2
+
+struct PptpStopSessionReply {
+	__u8	resultCode;
+	__u8	generalErrorCode;
+	__u16	reserved1;
+};
+
+struct PptpEchoRequest {
+	__be32 identNumber;
+};
+
+/* PptpEchoReplyResultCode */
+#define PPTP_ECHO_OK			1
+#define PPTP_ECHO_GENERAL_ERROR		2
+
+struct PptpEchoReply {
+	__be32	identNumber;
+	__u8	resultCode;
+	__u8	generalErrorCode;
+	__u16	reserved;
+};
+
+/* PptpFramingType */
+#define PPTP_ASYNC_FRAMING		1
+#define PPTP_SYNC_FRAMING		2
+#define PPTP_DONT_CARE_FRAMING		3
+
+/* PptpCallBearerType */
+#define PPTP_ANALOG_TYPE		1
+#define PPTP_DIGITAL_TYPE		2
+#define PPTP_DONT_CARE_BEARER_TYPE	3
+
+struct PptpOutCallRequest {
+	__be16	callID;
+	__be16	callSerialNumber;
+	__be32	minBPS;
+	__be32	maxBPS;
+	__be32	bearerType;
+	__be32	framingType;
+	__be16	packetWindow;
+	__be16	packetProcDelay;
+	__be16	phoneNumberLength;
+	__u16	reserved1;
+	__u8	phoneNumber[64];
+	__u8	subAddress[64];
+};
+
+/* PptpCallResultCode */
+#define PPTP_OUTCALL_CONNECT		1
+#define PPTP_OUTCALL_GENERAL_ERROR	2
+#define PPTP_OUTCALL_NO_CARRIER		3
+#define PPTP_OUTCALL_BUSY		4
+#define PPTP_OUTCALL_NO_DIAL_TONE	5
+#define PPTP_OUTCALL_TIMEOUT		6
+#define PPTP_OUTCALL_DONT_ACCEPT	7
+
+struct PptpOutCallReply {
+	__be16	callID;
+	__be16	peersCallID;
+	__u8	resultCode;
+	__u8	generalErrorCode;
+	__be16	causeCode;
+	__be32	connectSpeed;
+	__be16	packetWindow;
+	__be16	packetProcDelay;
+	__be32	physChannelID;
+};
+
+struct PptpInCallRequest {
+	__be16	callID;
+	__be16	callSerialNumber;
+	__be32	callBearerType;
+	__be32	physChannelID;
+	__be16	dialedNumberLength;
+	__be16	dialingNumberLength;
+	__u8	dialedNumber[64];
+	__u8	dialingNumber[64];
+	__u8	subAddress[64];
+};
+
+/* PptpInCallResultCode */
+#define PPTP_INCALL_ACCEPT		1
+#define PPTP_INCALL_GENERAL_ERROR	2
+#define PPTP_INCALL_DONT_ACCEPT		3
+
+struct PptpInCallReply {
+	__be16	callID;
+	__be16	peersCallID;
+	__u8	resultCode;
+	__u8	generalErrorCode;
+	__be16	packetWindow;
+	__be16	packetProcDelay;
+	__u16	reserved;
+};
+
+struct PptpInCallConnected {
+	__be16	peersCallID;
+	__u16	reserved;
+	__be32	connectSpeed;
+	__be16	packetWindow;
+	__be16	packetProcDelay;
+	__be32	callFramingType;
+};
+
+struct PptpClearCallRequest {
+	__be16	callID;
+	__u16	reserved;
+};
+
+struct PptpCallDisconnectNotify {
+	__be16	callID;
+	__u8	resultCode;
+	__u8	generalErrorCode;
+	__be16	causeCode;
+	__u16	reserved;
+	__u8	callStatistics[128];
+};
+
+struct PptpWanErrorNotify {
+	__be16	peersCallID;
+	__u16	reserved;
+	__be32	crcErrors;
+	__be32	framingErrors;
+	__be32	hardwareOverRuns;
+	__be32	bufferOverRuns;
+	__be32	timeoutErrors;
+	__be32	alignmentErrors;
+};
+
+struct PptpSetLinkInfo {
+	__be16	peersCallID;
+	__u16	reserved;
+	__be32	sendAccm;
+	__be32	recvAccm;
+};
+
+union pptp_ctrl_union {
+	struct PptpStartSessionRequest	sreq;
+	struct PptpStartSessionReply	srep;
+	struct PptpStopSessionRequest	streq;
+	struct PptpStopSessionReply	strep;
+	struct PptpOutCallRequest	ocreq;
+	struct PptpOutCallReply		ocack;
+	struct PptpInCallRequest	icreq;
+	struct PptpInCallReply		icack;
+	struct PptpInCallConnected	iccon;
+	struct PptpClearCallRequest	clrreq;
+	struct PptpCallDisconnectNotify disc;
+	struct PptpWanErrorNotify	wanerr;
+	struct PptpSetLinkInfo		setlink;
+};
+
+/* crap needed for nf_conntrack_compat.h */
+struct nf_conn;
+struct nf_conntrack_expect;
+
+extern int
+(*nf_nat_pptp_hook_outbound)(struct sk_buff *skb,
+			     struct nf_conn *ct, enum ip_conntrack_info ctinfo,
+			     struct PptpControlHeader *ctlh,
+			     union pptp_ctrl_union *pptpReq);
+
+extern int
+(*nf_nat_pptp_hook_inbound)(struct sk_buff *skb,
+			    struct nf_conn *ct, enum ip_conntrack_info ctinfo,
+			    struct PptpControlHeader *ctlh,
+			    union pptp_ctrl_union *pptpReq);
+
+extern void
+(*nf_nat_pptp_hook_exp_gre)(struct nf_conntrack_expect *exp_orig,
+			    struct nf_conntrack_expect *exp_reply);
+
+extern void
+(*nf_nat_pptp_hook_expectfn)(struct nf_conn *ct,
+			     struct nf_conntrack_expect *exp);
+
+#endif /* __KERNEL__ */
+#endif /* _NF_CONNTRACK_PPTP_H */
diff --git a/include/linux/netfilter/nf_conntrack_proto_gre.h b/include/linux/netfilter/nf_conntrack_proto_gre.h
new file mode 100644
index 00000000..6a0664c0
--- /dev/null
+++ b/include/linux/netfilter/nf_conntrack_proto_gre.h
@@ -0,0 +1,94 @@
+#ifndef _CONNTRACK_PROTO_GRE_H
+#define _CONNTRACK_PROTO_GRE_H
+#include <asm/byteorder.h>
+
+/* GRE PROTOCOL HEADER */
+
+/* GRE Version field */
+#define GRE_VERSION_1701	0x0
+#define GRE_VERSION_PPTP	0x1
+
+/* GRE Protocol field */
+#define GRE_PROTOCOL_PPTP	0x880B
+
+/* GRE Flags */
+#define GRE_FLAG_C		0x80
+#define GRE_FLAG_R		0x40
+#define GRE_FLAG_K		0x20
+#define GRE_FLAG_S		0x10
+#define GRE_FLAG_A		0x80
+
+#define GRE_IS_C(f)	((f)&GRE_FLAG_C)
+#define GRE_IS_R(f)	((f)&GRE_FLAG_R)
+#define GRE_IS_K(f)	((f)&GRE_FLAG_K)
+#define GRE_IS_S(f)	((f)&GRE_FLAG_S)
+#define GRE_IS_A(f)	((f)&GRE_FLAG_A)
+
+/* GRE is a mess: Four different standards */
+struct gre_hdr {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u16	rec:3,
+		srr:1,
+		seq:1,
+		key:1,
+		routing:1,
+		csum:1,
+		version:3,
+		reserved:4,
+		ack:1;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u16	csum:1,
+		routing:1,
+		key:1,
+		seq:1,
+		srr:1,
+		rec:3,
+		ack:1,
+		reserved:4,
+		version:3;
+#else
+#error "Adjust your <asm/byteorder.h> defines"
+#endif
+	__be16	protocol;
+};
+
+/* modified GRE header for PPTP */
+struct gre_hdr_pptp {
+	__u8   flags;		/* bitfield */
+	__u8   version;		/* should be GRE_VERSION_PPTP */
+	__be16 protocol;	/* should be GRE_PROTOCOL_PPTP */
+	__be16 payload_len;	/* size of ppp payload, not inc. gre header */
+	__be16 call_id;		/* peer's call_id for this session */
+	__be32 seq;		/* sequence number.  Present if S==1 */
+	__be32 ack;		/* seq number of highest packet received by */
+				/*  sender in this session */
+};
+
+struct nf_ct_gre {
+	unsigned int stream_timeout;
+	unsigned int timeout;
+};
+
+#ifdef __KERNEL__
+#include <net/netfilter/nf_conntrack_tuple.h>
+
+struct nf_conn;
+
+/* structure for original <-> reply keymap */
+struct nf_ct_gre_keymap {
+	struct list_head list;
+	struct nf_conntrack_tuple tuple;
+};
+
+/* add new tuple->key_reply pair to keymap */
+int nf_ct_gre_keymap_add(struct nf_conn *ct, enum ip_conntrack_dir dir,
+			 struct nf_conntrack_tuple *t);
+
+/* delete keymap entries */
+void nf_ct_gre_keymap_destroy(struct nf_conn *ct);
+
+extern void nf_ct_gre_keymap_flush(struct net *net);
+extern void nf_nat_need_gre(void);
+
+#endif /* __KERNEL__ */
+#endif /* _CONNTRACK_PROTO_GRE_H */
diff --git a/include/linux/netfilter/nf_conntrack_sane.h b/include/linux/netfilter/nf_conntrack_sane.h
new file mode 100644
index 00000000..4767d6e2
--- /dev/null
+++ b/include/linux/netfilter/nf_conntrack_sane.h
@@ -0,0 +1,21 @@
+#ifndef _NF_CONNTRACK_SANE_H
+#define _NF_CONNTRACK_SANE_H
+/* SANE tracking. */
+
+#ifdef __KERNEL__
+
+#define SANE_PORT	6566
+
+enum sane_state {
+	SANE_STATE_NORMAL,
+	SANE_STATE_START_REQUESTED,
+};
+
+/* This structure exists only once per master */
+struct nf_ct_sane_master {
+	enum sane_state state;
+};
+
+#endif /* __KERNEL__ */
+
+#endif /* _NF_CONNTRACK_SANE_H */
diff --git a/include/linux/netfilter/nf_conntrack_sctp.h b/include/linux/netfilter/nf_conntrack_sctp.h
new file mode 100644
index 00000000..ceeefe66
--- /dev/null
+++ b/include/linux/netfilter/nf_conntrack_sctp.h
@@ -0,0 +1,25 @@
+#ifndef _NF_CONNTRACK_SCTP_H
+#define _NF_CONNTRACK_SCTP_H
+/* SCTP tracking. */
+
+#include <linux/netfilter/nf_conntrack_tuple_common.h>
+
+enum sctp_conntrack {
+	SCTP_CONNTRACK_NONE,
+	SCTP_CONNTRACK_CLOSED,
+	SCTP_CONNTRACK_COOKIE_WAIT,
+	SCTP_CONNTRACK_COOKIE_ECHOED,
+	SCTP_CONNTRACK_ESTABLISHED,
+	SCTP_CONNTRACK_SHUTDOWN_SENT,
+	SCTP_CONNTRACK_SHUTDOWN_RECD,
+	SCTP_CONNTRACK_SHUTDOWN_ACK_SENT,
+	SCTP_CONNTRACK_MAX
+};
+
+struct ip_ct_sctp {
+	enum sctp_conntrack state;
+
+	__be32 vtag[IP_CT_DIR_MAX];
+};
+
+#endif /* _NF_CONNTRACK_SCTP_H */
diff --git a/include/linux/netfilter/nf_conntrack_sip.h b/include/linux/netfilter/nf_conntrack_sip.h
new file mode 100644
index 00000000..0ce91d56
--- /dev/null
+++ b/include/linux/netfilter/nf_conntrack_sip.h
@@ -0,0 +1,179 @@
+#ifndef __NF_CONNTRACK_SIP_H__
+#define __NF_CONNTRACK_SIP_H__
+#ifdef __KERNEL__
+
+#define SIP_PORT	5060
+#define SIP_TIMEOUT	3600
+
+struct nf_ct_sip_master {
+	unsigned int	register_cseq;
+	unsigned int	invite_cseq;
+};
+
+enum sip_expectation_classes {
+	SIP_EXPECT_SIGNALLING,
+	SIP_EXPECT_AUDIO,
+	SIP_EXPECT_VIDEO,
+	SIP_EXPECT_IMAGE,
+	__SIP_EXPECT_MAX
+};
+#define SIP_EXPECT_MAX	(__SIP_EXPECT_MAX - 1)
+
+struct sdp_media_type {
+	const char			*name;
+	unsigned int			len;
+	enum sip_expectation_classes	class;
+};
+
+#define SDP_MEDIA_TYPE(__name, __class)					\
+{									\
+	.name	= (__name),						\
+	.len	= sizeof(__name) - 1,					\
+	.class	= (__class),						\
+}
+
+struct sip_handler {
+	const char	*method;
+	unsigned int	len;
+	int		(*request)(struct sk_buff *skb, unsigned int dataoff,
+				   const char **dptr, unsigned int *datalen,
+				   unsigned int cseq);
+	int		(*response)(struct sk_buff *skb, unsigned int dataoff,
+				    const char **dptr, unsigned int *datalen,
+				    unsigned int cseq, unsigned int code);
+};
+
+#define SIP_HANDLER(__method, __request, __response)			\
+{									\
+	.method		= (__method),					\
+	.len		= sizeof(__method) - 1,				\
+	.request	= (__request),					\
+	.response	= (__response),					\
+}
+
+struct sip_header {
+	const char	*name;
+	const char	*cname;
+	const char	*search;
+	unsigned int	len;
+	unsigned int	clen;
+	unsigned int	slen;
+	int		(*match_len)(const struct nf_conn *ct,
+				     const char *dptr, const char *limit,
+				     int *shift);
+};
+
+#define __SIP_HDR(__name, __cname, __search, __match)			\
+{									\
+	.name		= (__name),					\
+	.len		= sizeof(__name) - 1,				\
+	.cname		= (__cname),					\
+	.clen		= (__cname) ? sizeof(__cname) - 1 : 0,		\
+	.search		= (__search),					\
+	.slen		= (__search) ? sizeof(__search) - 1 : 0,	\
+	.match_len	= (__match),					\
+}
+
+#define SIP_HDR(__name, __cname, __search, __match) \
+	__SIP_HDR(__name, __cname, __search, __match)
+
+#define SDP_HDR(__name, __search, __match) \
+	__SIP_HDR(__name, NULL, __search, __match)
+
+enum sip_header_types {
+	SIP_HDR_CSEQ,
+	SIP_HDR_FROM,
+	SIP_HDR_TO,
+	SIP_HDR_CONTACT,
+	SIP_HDR_VIA_UDP,
+	SIP_HDR_VIA_TCP,
+	SIP_HDR_EXPIRES,
+	SIP_HDR_CONTENT_LENGTH,
+	SIP_HDR_CALL_ID,
+};
+
+enum sdp_header_types {
+	SDP_HDR_UNSPEC,
+	SDP_HDR_VERSION,
+	SDP_HDR_OWNER_IP4,
+	SDP_HDR_CONNECTION_IP4,
+	SDP_HDR_OWNER_IP6,
+	SDP_HDR_CONNECTION_IP6,
+	SDP_HDR_MEDIA,
+};
+
+extern unsigned int (*nf_nat_sip_hook)(struct sk_buff *skb,
+				       unsigned int dataoff,
+				       const char **dptr,
+				       unsigned int *datalen);
+extern void (*nf_nat_sip_seq_adjust_hook)(struct sk_buff *skb, s16 off);
+extern unsigned int (*nf_nat_sip_expect_hook)(struct sk_buff *skb,
+					      unsigned int dataoff,
+					      const char **dptr,
+					      unsigned int *datalen,
+					      struct nf_conntrack_expect *exp,
+					      unsigned int matchoff,
+					      unsigned int matchlen);
+extern unsigned int (*nf_nat_sdp_addr_hook)(struct sk_buff *skb,
+					    unsigned int dataoff,
+					    const char **dptr,
+					    unsigned int *datalen,
+					    unsigned int sdpoff,
+					    enum sdp_header_types type,
+					    enum sdp_header_types term,
+					    const union nf_inet_addr *addr);
+extern unsigned int (*nf_nat_sdp_port_hook)(struct sk_buff *skb,
+					    unsigned int dataoff,
+					    const char **dptr,
+					    unsigned int *datalen,
+					    unsigned int matchoff,
+					    unsigned int matchlen,
+					    u_int16_t port);
+extern unsigned int (*nf_nat_sdp_session_hook)(struct sk_buff *skb,
+					       unsigned int dataoff,
+					       const char **dptr,
+					       unsigned int *datalen,
+					       unsigned int sdpoff,
+					       const union nf_inet_addr *addr);
+extern unsigned int (*nf_nat_sdp_media_hook)(struct sk_buff *skb,
+					     unsigned int dataoff,
+					     const char **dptr,
+					     unsigned int *datalen,
+					     struct nf_conntrack_expect *rtp_exp,
+					     struct nf_conntrack_expect *rtcp_exp,
+					     unsigned int mediaoff,
+					     unsigned int medialen,
+					     union nf_inet_addr *rtp_addr);
+
+extern int ct_sip_parse_request(const struct nf_conn *ct,
+				const char *dptr, unsigned int datalen,
+				unsigned int *matchoff, unsigned int *matchlen,
+				union nf_inet_addr *addr, __be16 *port);
+extern int ct_sip_get_header(const struct nf_conn *ct, const char *dptr,
+			     unsigned int dataoff, unsigned int datalen,
+			     enum sip_header_types type,
+			     unsigned int *matchoff, unsigned int *matchlen);
+extern int ct_sip_parse_header_uri(const struct nf_conn *ct, const char *dptr,
+				   unsigned int *dataoff, unsigned int datalen,
+				   enum sip_header_types type, int *in_header,
+				   unsigned int *matchoff, unsigned int *matchlen,
+				   union nf_inet_addr *addr, __be16 *port);
+extern int ct_sip_parse_address_param(const struct nf_conn *ct, const char *dptr,
+				      unsigned int dataoff, unsigned int datalen,
+				      const char *name,
+				      unsigned int *matchoff, unsigned int *matchlen,
+				      union nf_inet_addr *addr);
+extern int ct_sip_parse_numerical_param(const struct nf_conn *ct, const char *dptr,
+					unsigned int off, unsigned int datalen,
+					const char *name,
+					unsigned int *matchoff, unsigned int *matchen,
+					unsigned int *val);
+
+extern int ct_sip_get_sdp_header(const struct nf_conn *ct, const char *dptr,
+				 unsigned int dataoff, unsigned int datalen,
+				 enum sdp_header_types type,
+				 enum sdp_header_types term,
+				 unsigned int *matchoff, unsigned int *matchlen);
+
+#endif /* __KERNEL__ */
+#endif /* __NF_CONNTRACK_SIP_H__ */
diff --git a/include/linux/netfilter/nf_conntrack_snmp.h b/include/linux/netfilter/nf_conntrack_snmp.h
new file mode 100644
index 00000000..064bc63a
--- /dev/null
+++ b/include/linux/netfilter/nf_conntrack_snmp.h
@@ -0,0 +1,9 @@
+#ifndef _NF_CONNTRACK_SNMP_H
+#define _NF_CONNTRACK_SNMP_H
+
+extern int (*nf_nat_snmp_hook)(struct sk_buff *skb,
+				unsigned int protoff,
+				struct nf_conn *ct,
+				enum ip_conntrack_info ctinfo);
+
+#endif /* _NF_CONNTRACK_SNMP_H */
diff --git a/include/linux/netfilter/nf_conntrack_tcp.h b/include/linux/netfilter/nf_conntrack_tcp.h
new file mode 100644
index 00000000..e59868ae
--- /dev/null
+++ b/include/linux/netfilter/nf_conntrack_tcp.h
@@ -0,0 +1,79 @@
+#ifndef _NF_CONNTRACK_TCP_H
+#define _NF_CONNTRACK_TCP_H
+/* TCP tracking. */
+
+#include <linux/types.h>
+
+/* This is exposed to userspace (ctnetlink) */
+enum tcp_conntrack {
+	TCP_CONNTRACK_NONE,
+	TCP_CONNTRACK_SYN_SENT,
+	TCP_CONNTRACK_SYN_RECV,
+	TCP_CONNTRACK_ESTABLISHED,
+	TCP_CONNTRACK_FIN_WAIT,
+	TCP_CONNTRACK_CLOSE_WAIT,
+	TCP_CONNTRACK_LAST_ACK,
+	TCP_CONNTRACK_TIME_WAIT,
+	TCP_CONNTRACK_CLOSE,
+	TCP_CONNTRACK_LISTEN,	/* obsolete */
+#define TCP_CONNTRACK_SYN_SENT2	TCP_CONNTRACK_LISTEN
+	TCP_CONNTRACK_MAX,
+	TCP_CONNTRACK_IGNORE,
+	TCP_CONNTRACK_RETRANS,
+	TCP_CONNTRACK_UNACK,
+	TCP_CONNTRACK_TIMEOUT_MAX
+};
+
+/* Window scaling is advertised by the sender */
+#define IP_CT_TCP_FLAG_WINDOW_SCALE		0x01
+
+/* SACK is permitted by the sender */
+#define IP_CT_TCP_FLAG_SACK_PERM		0x02
+
+/* This sender sent FIN first */
+#define IP_CT_TCP_FLAG_CLOSE_INIT		0x04
+
+/* Be liberal in window checking */
+#define IP_CT_TCP_FLAG_BE_LIBERAL		0x08
+
+/* Has unacknowledged data */
+#define IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED	0x10
+
+/* The field td_maxack has been set */
+#define IP_CT_TCP_FLAG_MAXACK_SET		0x20
+
+struct nf_ct_tcp_flags {
+	__u8 flags;
+	__u8 mask;
+};
+
+#ifdef __KERNEL__
+
+struct ip_ct_tcp_state {
+	u_int32_t	td_end;		/* max of seq + len */
+	u_int32_t	td_maxend;	/* max of ack + max(win, 1) */
+	u_int32_t	td_maxwin;	/* max(win) */
+	u_int32_t	td_maxack;	/* max of ack */
+	u_int8_t	td_scale;	/* window scale factor */
+	u_int8_t	flags;		/* per direction options */
+};
+
+struct ip_ct_tcp {
+	struct ip_ct_tcp_state seen[2];	/* connection parameters per direction */
+	u_int8_t	state;		/* state of the connection (enum tcp_conntrack) */
+	/* For detecting stale connections */
+	u_int8_t	last_dir;	/* Direction of the last packet (enum ip_conntrack_dir) */
+	u_int8_t	retrans;	/* Number of retransmitted packets */
+	u_int8_t	last_index;	/* Index of the last packet */
+	u_int32_t	last_seq;	/* Last sequence number seen in dir */
+	u_int32_t	last_ack;	/* Last sequence number seen in opposite dir */
+	u_int32_t	last_end;	/* Last seq + len */
+	u_int16_t	last_win;	/* Last window advertisement seen in dir */
+	/* For SYN packets while we may be out-of-sync */
+	u_int8_t	last_wscale;	/* Last window scaling factor seen */
+	u_int8_t	last_flags;	/* Last flags set */
+};
+
+#endif /* __KERNEL__ */
+
+#endif /* _NF_CONNTRACK_TCP_H */
diff --git a/include/linux/netfilter/nf_conntrack_tftp.h b/include/linux/netfilter/nf_conntrack_tftp.h
new file mode 100644
index 00000000..c78d38fd
--- /dev/null
+++ b/include/linux/netfilter/nf_conntrack_tftp.h
@@ -0,0 +1,20 @@
+#ifndef _NF_CONNTRACK_TFTP_H
+#define _NF_CONNTRACK_TFTP_H
+
+#define TFTP_PORT 69
+
+struct tftphdr {
+	__be16 opcode;
+};
+
+#define TFTP_OPCODE_READ	1
+#define TFTP_OPCODE_WRITE	2
+#define TFTP_OPCODE_DATA	3
+#define TFTP_OPCODE_ACK		4
+#define TFTP_OPCODE_ERROR	5
+
+extern unsigned int (*nf_nat_tftp_hook)(struct sk_buff *skb,
+				        enum ip_conntrack_info ctinfo,
+				        struct nf_conntrack_expect *exp);
+
+#endif /* _NF_CONNTRACK_TFTP_H */
diff --git a/include/linux/netfilter/nf_conntrack_tuple_common.h b/include/linux/netfilter/nf_conntrack_tuple_common.h
new file mode 100644
index 00000000..2f6bbc5b
--- /dev/null
+++ b/include/linux/netfilter/nf_conntrack_tuple_common.h
@@ -0,0 +1,39 @@
+#ifndef _NF_CONNTRACK_TUPLE_COMMON_H
+#define _NF_CONNTRACK_TUPLE_COMMON_H
+
+enum ip_conntrack_dir {
+	IP_CT_DIR_ORIGINAL,
+	IP_CT_DIR_REPLY,
+	IP_CT_DIR_MAX
+};
+
+/* The protocol-specific manipulable parts of the tuple: always in
+ * network order
+ */
+union nf_conntrack_man_proto {
+	/* Add other protocols here. */
+	__be16 all;
+
+	struct {
+		__be16 port;
+	} tcp;
+	struct {
+		__be16 port;
+	} udp;
+	struct {
+		__be16 id;
+	} icmp;
+	struct {
+		__be16 port;
+	} dccp;
+	struct {
+		__be16 port;
+	} sctp;
+	struct {
+		__be16 key;	/* GRE key is 32bit, PPtP only uses 16bit */
+	} gre;
+};
+
+#define CTINFO2DIR(ctinfo) ((ctinfo) >= IP_CT_IS_REPLY ? IP_CT_DIR_REPLY : IP_CT_DIR_ORIGINAL)
+
+#endif /* _NF_CONNTRACK_TUPLE_COMMON_H */
diff --git a/include/linux/netfilter/nf_nat.h b/include/linux/netfilter/nf_nat.h
new file mode 100644
index 00000000..8df2d137
--- /dev/null
+++ b/include/linux/netfilter/nf_nat.h
@@ -0,0 +1,25 @@
+#ifndef _NETFILTER_NF_NAT_H
+#define _NETFILTER_NF_NAT_H
+
+#include <linux/netfilter.h>
+#include <linux/netfilter/nf_conntrack_tuple_common.h>
+
+#define NF_NAT_RANGE_MAP_IPS		1
+#define NF_NAT_RANGE_PROTO_SPECIFIED	2
+#define NF_NAT_RANGE_PROTO_RANDOM	4
+#define NF_NAT_RANGE_PERSISTENT		8
+
+struct nf_nat_ipv4_range {
+	unsigned int			flags;
+	__be32				min_ip;
+	__be32				max_ip;
+	union nf_conntrack_man_proto	min;
+	union nf_conntrack_man_proto	max;
+};
+
+struct nf_nat_ipv4_multi_range_compat {
+	unsigned int			rangesize;
+	struct nf_nat_ipv4_range	range[1];
+};
+
+#endif /* _NETFILTER_NF_NAT_H */
diff --git a/include/linux/netfilter/nfnetlink.h b/include/linux/netfilter/nfnetlink.h
new file mode 100644
index 00000000..6fd1f0d0
--- /dev/null
+++ b/include/linux/netfilter/nfnetlink.h
@@ -0,0 +1,95 @@
+#ifndef _NFNETLINK_H
+#define _NFNETLINK_H
+#include <linux/types.h>
+#include <linux/netfilter/nfnetlink_compat.h>
+
+enum nfnetlink_groups {
+	NFNLGRP_NONE,
+#define NFNLGRP_NONE			NFNLGRP_NONE
+	NFNLGRP_CONNTRACK_NEW,
+#define NFNLGRP_CONNTRACK_NEW		NFNLGRP_CONNTRACK_NEW
+	NFNLGRP_CONNTRACK_UPDATE,
+#define NFNLGRP_CONNTRACK_UPDATE	NFNLGRP_CONNTRACK_UPDATE
+	NFNLGRP_CONNTRACK_DESTROY,
+#define NFNLGRP_CONNTRACK_DESTROY	NFNLGRP_CONNTRACK_DESTROY
+	NFNLGRP_CONNTRACK_EXP_NEW,
+#define	NFNLGRP_CONNTRACK_EXP_NEW	NFNLGRP_CONNTRACK_EXP_NEW
+	NFNLGRP_CONNTRACK_EXP_UPDATE,
+#define NFNLGRP_CONNTRACK_EXP_UPDATE	NFNLGRP_CONNTRACK_EXP_UPDATE
+	NFNLGRP_CONNTRACK_EXP_DESTROY,
+#define NFNLGRP_CONNTRACK_EXP_DESTROY	NFNLGRP_CONNTRACK_EXP_DESTROY
+	__NFNLGRP_MAX,
+};
+#define NFNLGRP_MAX	(__NFNLGRP_MAX - 1)
+
+/* General form of address family dependent message.
+ */
+struct nfgenmsg {
+	__u8  nfgen_family;		/* AF_xxx */
+	__u8  version;		/* nfnetlink version */
+	__be16    res_id;		/* resource id */
+};
+
+#define NFNETLINK_V0	0
+
+/* netfilter netlink message types are split in two pieces:
+ * 8 bit subsystem, 8bit operation.
+ */
+
+#define NFNL_SUBSYS_ID(x)	((x & 0xff00) >> 8)
+#define NFNL_MSG_TYPE(x)	(x & 0x00ff)
+
+/* No enum here, otherwise __stringify() trick of MODULE_ALIAS_NFNL_SUBSYS()
+ * won't work anymore */
+#define NFNL_SUBSYS_NONE 		0
+#define NFNL_SUBSYS_CTNETLINK		1
+#define NFNL_SUBSYS_CTNETLINK_EXP	2
+#define NFNL_SUBSYS_QUEUE		3
+#define NFNL_SUBSYS_ULOG		4
+#define NFNL_SUBSYS_OSF			5
+#define NFNL_SUBSYS_IPSET		6
+#define NFNL_SUBSYS_ACCT		7
+#define NFNL_SUBSYS_CTNETLINK_TIMEOUT	8
+#define NFNL_SUBSYS_COUNT		9
+
+#ifdef __KERNEL__
+
+#include <linux/netlink.h>
+#include <linux/capability.h>
+#include <net/netlink.h>
+
+struct nfnl_callback {
+	int (*call)(struct sock *nl, struct sk_buff *skb, 
+		    const struct nlmsghdr *nlh,
+		    const struct nlattr * const cda[]);
+	int (*call_rcu)(struct sock *nl, struct sk_buff *skb, 
+		    const struct nlmsghdr *nlh,
+		    const struct nlattr * const cda[]);
+	const struct nla_policy *policy;	/* netlink attribute policy */
+	const u_int16_t attr_count;		/* number of nlattr's */
+};
+
+struct nfnetlink_subsystem {
+	const char *name;
+	__u8 subsys_id;			/* nfnetlink subsystem ID */
+	__u8 cb_count;			/* number of callbacks */
+	const struct nfnl_callback *cb;	/* callback for individual types */
+};
+
+extern int nfnetlink_subsys_register(const struct nfnetlink_subsystem *n);
+extern int nfnetlink_subsys_unregister(const struct nfnetlink_subsystem *n);
+
+extern int nfnetlink_has_listeners(struct net *net, unsigned int group);
+extern int nfnetlink_send(struct sk_buff *skb, struct net *net, u32 pid, unsigned group,
+			  int echo, gfp_t flags);
+extern int nfnetlink_set_err(struct net *net, u32 pid, u32 group, int error);
+extern int nfnetlink_unicast(struct sk_buff *skb, struct net *net, u_int32_t pid, int flags);
+
+extern void nfnl_lock(void);
+extern void nfnl_unlock(void);
+
+#define MODULE_ALIAS_NFNL_SUBSYS(subsys) \
+	MODULE_ALIAS("nfnetlink-subsys-" __stringify(subsys))
+
+#endif	/* __KERNEL__ */
+#endif	/* _NFNETLINK_H */
diff --git a/include/linux/netfilter/nfnetlink_acct.h b/include/linux/netfilter/nfnetlink_acct.h
new file mode 100644
index 00000000..7c4279b4
--- /dev/null
+++ b/include/linux/netfilter/nfnetlink_acct.h
@@ -0,0 +1,36 @@
+#ifndef _NFNL_ACCT_H_
+#define _NFNL_ACCT_H_
+
+#ifndef NFACCT_NAME_MAX
+#define NFACCT_NAME_MAX		32
+#endif
+
+enum nfnl_acct_msg_types {
+	NFNL_MSG_ACCT_NEW,
+	NFNL_MSG_ACCT_GET,
+	NFNL_MSG_ACCT_GET_CTRZERO,
+	NFNL_MSG_ACCT_DEL,
+	NFNL_MSG_ACCT_MAX
+};
+
+enum nfnl_acct_type {
+	NFACCT_UNSPEC,
+	NFACCT_NAME,
+	NFACCT_PKTS,
+	NFACCT_BYTES,
+	NFACCT_USE,
+	__NFACCT_MAX
+};
+#define NFACCT_MAX (__NFACCT_MAX - 1)
+
+#ifdef __KERNEL__
+
+struct nf_acct;
+
+extern struct nf_acct *nfnl_acct_find_get(const char *filter_name);
+extern void nfnl_acct_put(struct nf_acct *acct);
+extern void nfnl_acct_update(const struct sk_buff *skb, struct nf_acct *nfacct);
+
+#endif /* __KERNEL__ */
+
+#endif /* _NFNL_ACCT_H */
diff --git a/include/linux/netfilter/nfnetlink_compat.h b/include/linux/netfilter/nfnetlink_compat.h
new file mode 100644
index 00000000..ffb95036
--- /dev/null
+++ b/include/linux/netfilter/nfnetlink_compat.h
@@ -0,0 +1,63 @@
+#ifndef _NFNETLINK_COMPAT_H
+#define _NFNETLINK_COMPAT_H
+
+#include <linux/types.h>
+
+#ifndef __KERNEL__
+/* Old nfnetlink macros for userspace */
+
+/* nfnetlink groups: Up to 32 maximum */
+#define NF_NETLINK_CONNTRACK_NEW 		0x00000001
+#define NF_NETLINK_CONNTRACK_UPDATE		0x00000002
+#define NF_NETLINK_CONNTRACK_DESTROY		0x00000004
+#define NF_NETLINK_CONNTRACK_EXP_NEW		0x00000008
+#define NF_NETLINK_CONNTRACK_EXP_UPDATE		0x00000010
+#define NF_NETLINK_CONNTRACK_EXP_DESTROY	0x00000020
+
+/* Generic structure for encapsulation optional netfilter information.
+ * It is reminiscent of sockaddr, but with sa_family replaced
+ * with attribute type.
+ * ! This should someday be put somewhere generic as now rtnetlink and
+ * ! nfnetlink use the same attributes methods. - J. Schulist.
+ */
+
+struct nfattr {
+	__u16 nfa_len;
+	__u16 nfa_type;	/* we use 15 bits for the type, and the highest
+				 * bit to indicate whether the payload is nested */
+};
+
+/* FIXME: Apart from NFNL_NFA_NESTED shamelessly copy and pasted from
+ * rtnetlink.h, it's time to put this in a generic file */
+
+#define NFNL_NFA_NEST	0x8000
+#define NFA_TYPE(attr) 	((attr)->nfa_type & 0x7fff)
+
+#define NFA_ALIGNTO     4
+#define NFA_ALIGN(len)	(((len) + NFA_ALIGNTO - 1) & ~(NFA_ALIGNTO - 1))
+#define NFA_OK(nfa,len)	((len) > 0 && (nfa)->nfa_len >= sizeof(struct nfattr) \
+	&& (nfa)->nfa_len <= (len))
+#define NFA_NEXT(nfa,attrlen)	((attrlen) -= NFA_ALIGN((nfa)->nfa_len), \
+	(struct nfattr *)(((char *)(nfa)) + NFA_ALIGN((nfa)->nfa_len)))
+#define NFA_LENGTH(len)	(NFA_ALIGN(sizeof(struct nfattr)) + (len))
+#define NFA_SPACE(len)	NFA_ALIGN(NFA_LENGTH(len))
+#define NFA_DATA(nfa)   ((void *)(((char *)(nfa)) + NFA_LENGTH(0)))
+#define NFA_PAYLOAD(nfa) ((int)((nfa)->nfa_len) - NFA_LENGTH(0))
+#define NFA_NEST(skb, type) \
+({	struct nfattr *__start = (struct nfattr *)skb_tail_pointer(skb); \
+	NFA_PUT(skb, (NFNL_NFA_NEST | type), 0, NULL); \
+	__start;  })
+#define NFA_NEST_END(skb, start) \
+({      (start)->nfa_len = skb_tail_pointer(skb) - (unsigned char *)(start); \
+        (skb)->len; })
+#define NFA_NEST_CANCEL(skb, start) \
+({      if (start) \
+                skb_trim(skb, (unsigned char *) (start) - (skb)->data); \
+        -1; })
+
+#define NFM_NFA(n)      ((struct nfattr *)(((char *)(n)) \
+        + NLMSG_ALIGN(sizeof(struct nfgenmsg))))
+#define NFM_PAYLOAD(n)  NLMSG_PAYLOAD(n, sizeof(struct nfgenmsg))
+
+#endif /* ! __KERNEL__ */
+#endif /* _NFNETLINK_COMPAT_H */
diff --git a/include/linux/netfilter/nfnetlink_conntrack.h b/include/linux/netfilter/nfnetlink_conntrack.h
new file mode 100644
index 00000000..e58e4b93
--- /dev/null
+++ b/include/linux/netfilter/nfnetlink_conntrack.h
@@ -0,0 +1,205 @@
+#ifndef _IPCONNTRACK_NETLINK_H
+#define _IPCONNTRACK_NETLINK_H
+#include <linux/netfilter/nfnetlink.h>
+
+enum cntl_msg_types {
+	IPCTNL_MSG_CT_NEW,
+	IPCTNL_MSG_CT_GET,
+	IPCTNL_MSG_CT_DELETE,
+	IPCTNL_MSG_CT_GET_CTRZERO,
+
+	IPCTNL_MSG_MAX
+};
+
+enum ctnl_exp_msg_types {
+	IPCTNL_MSG_EXP_NEW,
+	IPCTNL_MSG_EXP_GET,
+	IPCTNL_MSG_EXP_DELETE,
+
+	IPCTNL_MSG_EXP_MAX
+};
+
+
+enum ctattr_type {
+	CTA_UNSPEC,
+	CTA_TUPLE_ORIG,
+	CTA_TUPLE_REPLY,
+	CTA_STATUS,
+	CTA_PROTOINFO,
+	CTA_HELP,
+	CTA_NAT_SRC,
+#define CTA_NAT	CTA_NAT_SRC	/* backwards compatibility */
+	CTA_TIMEOUT,
+	CTA_MARK,
+	CTA_COUNTERS_ORIG,
+	CTA_COUNTERS_REPLY,
+	CTA_USE,
+	CTA_ID,
+	CTA_NAT_DST,
+	CTA_TUPLE_MASTER,
+	CTA_NAT_SEQ_ADJ_ORIG,
+	CTA_NAT_SEQ_ADJ_REPLY,
+	CTA_SECMARK,		/* obsolete */
+	CTA_ZONE,
+	CTA_SECCTX,
+	CTA_TIMESTAMP,
+	CTA_MARK_MASK,
+	__CTA_MAX
+};
+#define CTA_MAX (__CTA_MAX - 1)
+
+enum ctattr_tuple {
+	CTA_TUPLE_UNSPEC,
+	CTA_TUPLE_IP,
+	CTA_TUPLE_PROTO,
+	__CTA_TUPLE_MAX
+};
+#define CTA_TUPLE_MAX (__CTA_TUPLE_MAX - 1)
+
+enum ctattr_ip {
+	CTA_IP_UNSPEC,
+	CTA_IP_V4_SRC,
+	CTA_IP_V4_DST,
+	CTA_IP_V6_SRC,
+	CTA_IP_V6_DST,
+	__CTA_IP_MAX
+};
+#define CTA_IP_MAX (__CTA_IP_MAX - 1)
+
+enum ctattr_l4proto {
+	CTA_PROTO_UNSPEC,
+	CTA_PROTO_NUM,
+	CTA_PROTO_SRC_PORT,
+	CTA_PROTO_DST_PORT,
+	CTA_PROTO_ICMP_ID,
+	CTA_PROTO_ICMP_TYPE,
+	CTA_PROTO_ICMP_CODE,
+	CTA_PROTO_ICMPV6_ID,
+	CTA_PROTO_ICMPV6_TYPE,
+	CTA_PROTO_ICMPV6_CODE,
+	__CTA_PROTO_MAX
+};
+#define CTA_PROTO_MAX (__CTA_PROTO_MAX - 1)
+
+enum ctattr_protoinfo {
+	CTA_PROTOINFO_UNSPEC,
+	CTA_PROTOINFO_TCP,
+	CTA_PROTOINFO_DCCP,
+	CTA_PROTOINFO_SCTP,
+	__CTA_PROTOINFO_MAX
+};
+#define CTA_PROTOINFO_MAX (__CTA_PROTOINFO_MAX - 1)
+
+enum ctattr_protoinfo_tcp {
+	CTA_PROTOINFO_TCP_UNSPEC,
+	CTA_PROTOINFO_TCP_STATE,
+	CTA_PROTOINFO_TCP_WSCALE_ORIGINAL,
+	CTA_PROTOINFO_TCP_WSCALE_REPLY,
+	CTA_PROTOINFO_TCP_FLAGS_ORIGINAL,
+	CTA_PROTOINFO_TCP_FLAGS_REPLY,
+	__CTA_PROTOINFO_TCP_MAX
+};
+#define CTA_PROTOINFO_TCP_MAX (__CTA_PROTOINFO_TCP_MAX - 1)
+
+enum ctattr_protoinfo_dccp {
+	CTA_PROTOINFO_DCCP_UNSPEC,
+	CTA_PROTOINFO_DCCP_STATE,
+	CTA_PROTOINFO_DCCP_ROLE,
+	CTA_PROTOINFO_DCCP_HANDSHAKE_SEQ,
+	__CTA_PROTOINFO_DCCP_MAX,
+};
+#define CTA_PROTOINFO_DCCP_MAX (__CTA_PROTOINFO_DCCP_MAX - 1)
+
+enum ctattr_protoinfo_sctp {
+	CTA_PROTOINFO_SCTP_UNSPEC,
+	CTA_PROTOINFO_SCTP_STATE,
+	CTA_PROTOINFO_SCTP_VTAG_ORIGINAL,
+	CTA_PROTOINFO_SCTP_VTAG_REPLY,
+	__CTA_PROTOINFO_SCTP_MAX
+};
+#define CTA_PROTOINFO_SCTP_MAX (__CTA_PROTOINFO_SCTP_MAX - 1)
+
+enum ctattr_counters {
+	CTA_COUNTERS_UNSPEC,
+	CTA_COUNTERS_PACKETS,		/* 64bit counters */
+	CTA_COUNTERS_BYTES,		/* 64bit counters */
+	CTA_COUNTERS32_PACKETS,		/* old 32bit counters, unused */
+	CTA_COUNTERS32_BYTES,		/* old 32bit counters, unused */
+	__CTA_COUNTERS_MAX
+};
+#define CTA_COUNTERS_MAX (__CTA_COUNTERS_MAX - 1)
+
+enum ctattr_tstamp {
+	CTA_TIMESTAMP_UNSPEC,
+	CTA_TIMESTAMP_START,
+	CTA_TIMESTAMP_STOP,
+	__CTA_TIMESTAMP_MAX
+};
+#define CTA_TIMESTAMP_MAX (__CTA_TIMESTAMP_MAX - 1)
+
+enum ctattr_nat {
+	CTA_NAT_UNSPEC,
+	CTA_NAT_MINIP,
+	CTA_NAT_MAXIP,
+	CTA_NAT_PROTO,
+	__CTA_NAT_MAX
+};
+#define CTA_NAT_MAX (__CTA_NAT_MAX - 1)
+
+enum ctattr_protonat {
+	CTA_PROTONAT_UNSPEC,
+	CTA_PROTONAT_PORT_MIN,
+	CTA_PROTONAT_PORT_MAX,
+	__CTA_PROTONAT_MAX
+};
+#define CTA_PROTONAT_MAX (__CTA_PROTONAT_MAX - 1)
+
+enum ctattr_natseq {
+	CTA_NAT_SEQ_UNSPEC,
+	CTA_NAT_SEQ_CORRECTION_POS,
+	CTA_NAT_SEQ_OFFSET_BEFORE,
+	CTA_NAT_SEQ_OFFSET_AFTER,
+	__CTA_NAT_SEQ_MAX
+};
+#define CTA_NAT_SEQ_MAX (__CTA_NAT_SEQ_MAX - 1)
+
+enum ctattr_expect {
+	CTA_EXPECT_UNSPEC,
+	CTA_EXPECT_MASTER,
+	CTA_EXPECT_TUPLE,
+	CTA_EXPECT_MASK,
+	CTA_EXPECT_TIMEOUT,
+	CTA_EXPECT_ID,
+	CTA_EXPECT_HELP_NAME,
+	CTA_EXPECT_ZONE,
+	CTA_EXPECT_FLAGS,
+	CTA_EXPECT_CLASS,
+	CTA_EXPECT_NAT,
+	CTA_EXPECT_FN,
+	__CTA_EXPECT_MAX
+};
+#define CTA_EXPECT_MAX (__CTA_EXPECT_MAX - 1)
+
+enum ctattr_expect_nat {
+	CTA_EXPECT_NAT_UNSPEC,
+	CTA_EXPECT_NAT_DIR,
+	CTA_EXPECT_NAT_TUPLE,
+	__CTA_EXPECT_NAT_MAX
+};
+#define CTA_EXPECT_NAT_MAX (__CTA_EXPECT_NAT_MAX - 1)
+
+enum ctattr_help {
+	CTA_HELP_UNSPEC,
+	CTA_HELP_NAME,
+	__CTA_HELP_MAX
+};
+#define CTA_HELP_MAX (__CTA_HELP_MAX - 1)
+
+enum ctattr_secctx {
+	CTA_SECCTX_UNSPEC,
+	CTA_SECCTX_NAME,
+	__CTA_SECCTX_MAX
+};
+#define CTA_SECCTX_MAX (__CTA_SECCTX_MAX - 1)
+
+#endif /* _IPCONNTRACK_NETLINK_H */
diff --git a/include/linux/netfilter/nfnetlink_cttimeout.h b/include/linux/netfilter/nfnetlink_cttimeout.h
new file mode 100644
index 00000000..a2810a7c
--- /dev/null
+++ b/include/linux/netfilter/nfnetlink_cttimeout.h
@@ -0,0 +1,114 @@
+#ifndef _CTTIMEOUT_NETLINK_H
+#define _CTTIMEOUT_NETLINK_H
+#include <linux/netfilter/nfnetlink.h>
+
+enum ctnl_timeout_msg_types {
+	IPCTNL_MSG_TIMEOUT_NEW,
+	IPCTNL_MSG_TIMEOUT_GET,
+	IPCTNL_MSG_TIMEOUT_DELETE,
+
+	IPCTNL_MSG_TIMEOUT_MAX
+};
+
+enum ctattr_timeout {
+	CTA_TIMEOUT_UNSPEC,
+	CTA_TIMEOUT_NAME,
+	CTA_TIMEOUT_L3PROTO,
+	CTA_TIMEOUT_L4PROTO,
+	CTA_TIMEOUT_DATA,
+	CTA_TIMEOUT_USE,
+	__CTA_TIMEOUT_MAX
+};
+#define CTA_TIMEOUT_MAX (__CTA_TIMEOUT_MAX - 1)
+
+enum ctattr_timeout_generic {
+	CTA_TIMEOUT_GENERIC_UNSPEC,
+	CTA_TIMEOUT_GENERIC_TIMEOUT,
+	__CTA_TIMEOUT_GENERIC_MAX
+};
+#define CTA_TIMEOUT_GENERIC_MAX (__CTA_TIMEOUT_GENERIC_MAX - 1)
+
+enum ctattr_timeout_tcp {
+	CTA_TIMEOUT_TCP_UNSPEC,
+	CTA_TIMEOUT_TCP_SYN_SENT,
+	CTA_TIMEOUT_TCP_SYN_RECV,
+	CTA_TIMEOUT_TCP_ESTABLISHED,
+	CTA_TIMEOUT_TCP_FIN_WAIT,
+	CTA_TIMEOUT_TCP_CLOSE_WAIT,
+	CTA_TIMEOUT_TCP_LAST_ACK,
+	CTA_TIMEOUT_TCP_TIME_WAIT,
+	CTA_TIMEOUT_TCP_CLOSE,
+	CTA_TIMEOUT_TCP_SYN_SENT2,
+	CTA_TIMEOUT_TCP_RETRANS,
+	CTA_TIMEOUT_TCP_UNACK,
+	__CTA_TIMEOUT_TCP_MAX
+};
+#define CTA_TIMEOUT_TCP_MAX (__CTA_TIMEOUT_TCP_MAX - 1)
+
+enum ctattr_timeout_udp {
+	CTA_TIMEOUT_UDP_UNSPEC,
+	CTA_TIMEOUT_UDP_UNREPLIED,
+	CTA_TIMEOUT_UDP_REPLIED,
+	__CTA_TIMEOUT_UDP_MAX
+};
+#define CTA_TIMEOUT_UDP_MAX (__CTA_TIMEOUT_UDP_MAX - 1)
+
+enum ctattr_timeout_udplite {
+	CTA_TIMEOUT_UDPLITE_UNSPEC,
+	CTA_TIMEOUT_UDPLITE_UNREPLIED,
+	CTA_TIMEOUT_UDPLITE_REPLIED,
+	__CTA_TIMEOUT_UDPLITE_MAX
+};
+#define CTA_TIMEOUT_UDPLITE_MAX (__CTA_TIMEOUT_UDPLITE_MAX - 1)
+
+enum ctattr_timeout_icmp {
+	CTA_TIMEOUT_ICMP_UNSPEC,
+	CTA_TIMEOUT_ICMP_TIMEOUT,
+	__CTA_TIMEOUT_ICMP_MAX
+};
+#define CTA_TIMEOUT_ICMP_MAX (__CTA_TIMEOUT_ICMP_MAX - 1)
+
+enum ctattr_timeout_dccp {
+	CTA_TIMEOUT_DCCP_UNSPEC,
+	CTA_TIMEOUT_DCCP_REQUEST,
+	CTA_TIMEOUT_DCCP_RESPOND,
+	CTA_TIMEOUT_DCCP_PARTOPEN,
+	CTA_TIMEOUT_DCCP_OPEN,
+	CTA_TIMEOUT_DCCP_CLOSEREQ,
+	CTA_TIMEOUT_DCCP_CLOSING,
+	CTA_TIMEOUT_DCCP_TIMEWAIT,
+	__CTA_TIMEOUT_DCCP_MAX
+};
+#define CTA_TIMEOUT_DCCP_MAX (__CTA_TIMEOUT_DCCP_MAX - 1)
+
+enum ctattr_timeout_sctp {
+	CTA_TIMEOUT_SCTP_UNSPEC,
+	CTA_TIMEOUT_SCTP_CLOSED,
+	CTA_TIMEOUT_SCTP_COOKIE_WAIT,
+	CTA_TIMEOUT_SCTP_COOKIE_ECHOED,
+	CTA_TIMEOUT_SCTP_ESTABLISHED,
+	CTA_TIMEOUT_SCTP_SHUTDOWN_SENT,
+	CTA_TIMEOUT_SCTP_SHUTDOWN_RECD,
+	CTA_TIMEOUT_SCTP_SHUTDOWN_ACK_SENT,
+	__CTA_TIMEOUT_SCTP_MAX
+};
+#define CTA_TIMEOUT_SCTP_MAX (__CTA_TIMEOUT_SCTP_MAX - 1)
+
+enum ctattr_timeout_icmpv6 {
+	CTA_TIMEOUT_ICMPV6_UNSPEC,
+	CTA_TIMEOUT_ICMPV6_TIMEOUT,
+	__CTA_TIMEOUT_ICMPV6_MAX
+};
+#define CTA_TIMEOUT_ICMPV6_MAX (__CTA_TIMEOUT_ICMPV6_MAX - 1)
+
+enum ctattr_timeout_gre {
+	CTA_TIMEOUT_GRE_UNSPEC,
+	CTA_TIMEOUT_GRE_UNREPLIED,
+	CTA_TIMEOUT_GRE_REPLIED,
+	__CTA_TIMEOUT_GRE_MAX
+};
+#define CTA_TIMEOUT_GRE_MAX (__CTA_TIMEOUT_GRE_MAX - 1)
+
+#define CTNL_TIMEOUT_NAME_MAX	32
+
+#endif
diff --git a/include/linux/netfilter/nfnetlink_log.h b/include/linux/netfilter/nfnetlink_log.h
new file mode 100644
index 00000000..90c2c957
--- /dev/null
+++ b/include/linux/netfilter/nfnetlink_log.h
@@ -0,0 +1,97 @@
+#ifndef _NFNETLINK_LOG_H
+#define _NFNETLINK_LOG_H
+
+/* This file describes the netlink messages (i.e. 'protocol packets'),
+ * and not any kind of function definitions.  It is shared between kernel and
+ * userspace.  Don't put kernel specific stuff in here */
+
+#include <linux/types.h>
+#include <linux/netfilter/nfnetlink.h>
+
+enum nfulnl_msg_types {
+	NFULNL_MSG_PACKET,		/* packet from kernel to userspace */
+	NFULNL_MSG_CONFIG,		/* connect to a particular queue */
+
+	NFULNL_MSG_MAX
+};
+
+struct nfulnl_msg_packet_hdr {
+	__be16		hw_protocol;	/* hw protocol (network order) */
+	__u8	hook;		/* netfilter hook */
+	__u8	_pad;
+};
+
+struct nfulnl_msg_packet_hw {
+	__be16		hw_addrlen;
+	__u16	_pad;
+	__u8	hw_addr[8];
+};
+
+struct nfulnl_msg_packet_timestamp {
+	__aligned_be64	sec;
+	__aligned_be64	usec;
+};
+
+enum nfulnl_attr_type {
+	NFULA_UNSPEC,
+	NFULA_PACKET_HDR,
+	NFULA_MARK,			/* __u32 nfmark */
+	NFULA_TIMESTAMP,		/* nfulnl_msg_packet_timestamp */
+	NFULA_IFINDEX_INDEV,		/* __u32 ifindex */
+	NFULA_IFINDEX_OUTDEV,		/* __u32 ifindex */
+	NFULA_IFINDEX_PHYSINDEV,	/* __u32 ifindex */
+	NFULA_IFINDEX_PHYSOUTDEV,	/* __u32 ifindex */
+	NFULA_HWADDR,			/* nfulnl_msg_packet_hw */
+	NFULA_PAYLOAD,			/* opaque data payload */
+	NFULA_PREFIX,			/* string prefix */
+	NFULA_UID,			/* user id of socket */
+	NFULA_SEQ,			/* instance-local sequence number */
+	NFULA_SEQ_GLOBAL,		/* global sequence number */
+	NFULA_GID,			/* group id of socket */
+	NFULA_HWTYPE,			/* hardware type */
+	NFULA_HWHEADER,			/* hardware header */
+	NFULA_HWLEN,			/* hardware header length */
+
+	__NFULA_MAX
+};
+#define NFULA_MAX (__NFULA_MAX - 1)
+
+enum nfulnl_msg_config_cmds {
+	NFULNL_CFG_CMD_NONE,
+	NFULNL_CFG_CMD_BIND,
+	NFULNL_CFG_CMD_UNBIND,
+	NFULNL_CFG_CMD_PF_BIND,
+	NFULNL_CFG_CMD_PF_UNBIND,
+};
+
+struct nfulnl_msg_config_cmd {
+	__u8	command;	/* nfulnl_msg_config_cmds */
+} __attribute__ ((packed));
+
+struct nfulnl_msg_config_mode {
+	__be32		copy_range;
+	__u8	copy_mode;
+	__u8	_pad;
+} __attribute__ ((packed));
+
+enum nfulnl_attr_config {
+	NFULA_CFG_UNSPEC,
+	NFULA_CFG_CMD,			/* nfulnl_msg_config_cmd */
+	NFULA_CFG_MODE,			/* nfulnl_msg_config_mode */
+	NFULA_CFG_NLBUFSIZ,		/* __u32 buffer size */
+	NFULA_CFG_TIMEOUT,		/* __u32 in 1/100 s */
+	NFULA_CFG_QTHRESH,		/* __u32 */
+	NFULA_CFG_FLAGS,		/* __u16 */
+	__NFULA_CFG_MAX
+};
+#define NFULA_CFG_MAX (__NFULA_CFG_MAX -1)
+
+#define NFULNL_COPY_NONE	0x00
+#define NFULNL_COPY_META	0x01
+#define NFULNL_COPY_PACKET	0x02
+/* 0xff is reserved, don't use it for new copy modes. */
+
+#define NFULNL_CFG_F_SEQ	0x0001
+#define NFULNL_CFG_F_SEQ_GLOBAL	0x0002
+
+#endif /* _NFNETLINK_LOG_H */
diff --git a/include/linux/netfilter/nfnetlink_queue.h b/include/linux/netfilter/nfnetlink_queue.h
new file mode 100644
index 00000000..24b32e6c
--- /dev/null
+++ b/include/linux/netfilter/nfnetlink_queue.h
@@ -0,0 +1,91 @@
+#ifndef _NFNETLINK_QUEUE_H
+#define _NFNETLINK_QUEUE_H
+
+#include <linux/types.h>
+#include <linux/netfilter/nfnetlink.h>
+
+enum nfqnl_msg_types {
+	NFQNL_MSG_PACKET,		/* packet from kernel to userspace */
+	NFQNL_MSG_VERDICT,		/* verdict from userspace to kernel */
+	NFQNL_MSG_CONFIG,		/* connect to a particular queue */
+	NFQNL_MSG_VERDICT_BATCH,	/* batchv from userspace to kernel */
+
+	NFQNL_MSG_MAX
+};
+
+struct nfqnl_msg_packet_hdr {
+	__be32		packet_id;	/* unique ID of packet in queue */
+	__be16		hw_protocol;	/* hw protocol (network order) */
+	__u8	hook;		/* netfilter hook */
+} __attribute__ ((packed));
+
+struct nfqnl_msg_packet_hw {
+	__be16		hw_addrlen;
+	__u16	_pad;
+	__u8	hw_addr[8];
+};
+
+struct nfqnl_msg_packet_timestamp {
+	__aligned_be64	sec;
+	__aligned_be64	usec;
+};
+
+enum nfqnl_attr_type {
+	NFQA_UNSPEC,
+	NFQA_PACKET_HDR,
+	NFQA_VERDICT_HDR,		/* nfqnl_msg_verdict_hrd */
+	NFQA_MARK,			/* __u32 nfmark */
+	NFQA_TIMESTAMP,			/* nfqnl_msg_packet_timestamp */
+	NFQA_IFINDEX_INDEV,		/* __u32 ifindex */
+	NFQA_IFINDEX_OUTDEV,		/* __u32 ifindex */
+	NFQA_IFINDEX_PHYSINDEV,		/* __u32 ifindex */
+	NFQA_IFINDEX_PHYSOUTDEV,	/* __u32 ifindex */
+	NFQA_HWADDR,			/* nfqnl_msg_packet_hw */
+	NFQA_PAYLOAD,			/* opaque data payload */
+
+	__NFQA_MAX
+};
+#define NFQA_MAX (__NFQA_MAX - 1)
+
+struct nfqnl_msg_verdict_hdr {
+	__be32 verdict;
+	__be32 id;
+};
+
+
+enum nfqnl_msg_config_cmds {
+	NFQNL_CFG_CMD_NONE,
+	NFQNL_CFG_CMD_BIND,
+	NFQNL_CFG_CMD_UNBIND,
+	NFQNL_CFG_CMD_PF_BIND,
+	NFQNL_CFG_CMD_PF_UNBIND,
+};
+
+struct nfqnl_msg_config_cmd {
+	__u8	command;	/* nfqnl_msg_config_cmds */
+	__u8	_pad;
+	__be16		pf;		/* AF_xxx for PF_[UN]BIND */
+};
+
+enum nfqnl_config_mode {
+	NFQNL_COPY_NONE,
+	NFQNL_COPY_META,
+	NFQNL_COPY_PACKET,
+};
+
+struct nfqnl_msg_config_params {
+	__be32		copy_range;
+	__u8	copy_mode;	/* enum nfqnl_config_mode */
+} __attribute__ ((packed));
+
+
+enum nfqnl_attr_config {
+	NFQA_CFG_UNSPEC,
+	NFQA_CFG_CMD,			/* nfqnl_msg_config_cmd */
+	NFQA_CFG_PARAMS,		/* nfqnl_msg_config_params */
+	NFQA_CFG_QUEUE_MAXLEN,		/* __u32 */
+	__NFQA_CFG_MAX
+};
+#define NFQA_CFG_MAX (__NFQA_CFG_MAX-1)
+
+#endif /* _NFNETLINK_QUEUE_H */
diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h
new file mode 100644
index 00000000..8d674a78
--- /dev/null
+++ b/include/linux/netfilter/x_tables.h
@@ -0,0 +1,622 @@
+#ifndef _X_TABLES_H
+#define _X_TABLES_H
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#define XT_FUNCTION_MAXNAMELEN 30
+#define XT_EXTENSION_MAXNAMELEN 29
+#define XT_TABLE_MAXNAMELEN 32
+
+struct xt_entry_match {
+	union {
+		struct {
+			__u16 match_size;
+
+			/* Used by userspace */
+			char name[XT_EXTENSION_MAXNAMELEN];
+			__u8 revision;
+		} user;
+		struct {
+			__u16 match_size;
+
+			/* Used inside the kernel */
+			struct xt_match *match;
+		} kernel;
+
+		/* Total length */
+		__u16 match_size;
+	} u;
+
+	unsigned char data[0];
+};
+
+struct xt_entry_target {
+	union {
+		struct {
+			__u16 target_size;
+
+			/* Used by userspace */
+			char name[XT_EXTENSION_MAXNAMELEN];
+			__u8 revision;
+		} user;
+		struct {
+			__u16 target_size;
+
+			/* Used inside the kernel */
+			struct xt_target *target;
+		} kernel;
+
+		/* Total length */
+		__u16 target_size;
+	} u;
+
+	unsigned char data[0];
+};
+
+#define XT_TARGET_INIT(__name, __size)					       \
+{									       \
+	.target.u.user = {						       \
+		.target_size	= XT_ALIGN(__size),			       \
+		.name		= __name,				       \
+	},								       \
+}
+
+struct xt_standard_target {
+	struct xt_entry_target target;
+	int verdict;
+};
+
+struct xt_error_target {
+	struct xt_entry_target target;
+	char errorname[XT_FUNCTION_MAXNAMELEN];
+};
+
+/* The argument to IPT_SO_GET_REVISION_*.  Returns highest revision
+ * kernel supports, if >= revision. */
+struct xt_get_revision {
+	char name[XT_EXTENSION_MAXNAMELEN];
+	__u8 revision;
+};
+
+/* CONTINUE verdict for targets */
+#define XT_CONTINUE 0xFFFFFFFF
+
+/* For standard target */
+#define XT_RETURN (-NF_REPEAT - 1)
+
+/* this is a dummy structure to find out the alignment requirement for a struct
+ * containing all the fundamental data types that are used in ipt_entry,
+ * ip6t_entry and arpt_entry.  This sucks, and it is a hack.  It will be my
+ * personal pleasure to remove it -HW
+ */
+struct _xt_align {
+	__u8 u8;
+	__u16 u16;
+	__u32 u32;
+	__u64 u64;
+};
+
+#define XT_ALIGN(s) __ALIGN_KERNEL((s), __alignof__(struct _xt_align))
+
+/* Standard return verdict, or do jump. */
+#define XT_STANDARD_TARGET ""
+/* Error verdict. */
+#define XT_ERROR_TARGET "ERROR"
+
+#define SET_COUNTER(c,b,p) do { (c).bcnt = (b); (c).pcnt = (p); } while(0)
+#define ADD_COUNTER(c,b,p) do { (c).bcnt += (b); (c).pcnt += (p); } while(0)
+
+struct xt_counters {
+	__u64 pcnt, bcnt;			/* Packet and byte counters */
+};
+
+/* The argument to IPT_SO_ADD_COUNTERS. */
+struct xt_counters_info {
+	/* Which table. */
+	char name[XT_TABLE_MAXNAMELEN];
+
+	unsigned int num_counters;
+
+	/* The counters (actually `number' of these). */
+	struct xt_counters counters[0];
+};
+
+#define XT_INV_PROTO		0x40	/* Invert the sense of PROTO. */
+
+#ifndef __KERNEL__
+/* fn returns 0 to continue iteration */
+#define XT_MATCH_ITERATE(type, e, fn, args...)			\
+({								\
+	unsigned int __i;					\
+	int __ret = 0;						\
+	struct xt_entry_match *__m;				\
+								\
+	for (__i = sizeof(type);				\
+	     __i < (e)->target_offset;				\
+	     __i += __m->u.match_size) {			\
+		__m = (void *)e + __i;				\
+								\
+		__ret = fn(__m , ## args);			\
+		if (__ret != 0)					\
+			break;					\
+	}							\
+	__ret;							\
+})
+
+/* fn returns 0 to continue iteration */
+#define XT_ENTRY_ITERATE_CONTINUE(type, entries, size, n, fn, args...) \
+({								\
+	unsigned int __i, __n;					\
+	int __ret = 0;						\
+	type *__entry;						\
+								\
+	for (__i = 0, __n = 0; __i < (size);			\
+	     __i += __entry->next_offset, __n++) { 		\
+		__entry = (void *)(entries) + __i;		\
+		if (__n < n)					\
+			continue;				\
+								\
+		__ret = fn(__entry , ## args);			\
+		if (__ret != 0)					\
+			break;					\
+	}							\
+	__ret;							\
+})
+
+/* fn returns 0 to continue iteration */
+#define XT_ENTRY_ITERATE(type, entries, size, fn, args...) \
+	XT_ENTRY_ITERATE_CONTINUE(type, entries, size, 0, fn, args)
+
+#endif /* !__KERNEL__ */
+
+/* pos is normally a struct ipt_entry/ip6t_entry/etc. */
+#define xt_entry_foreach(pos, ehead, esize) \
+	for ((pos) = (typeof(pos))(ehead); \
+	     (pos) < (typeof(pos))((char *)(ehead) + (esize)); \
+	     (pos) = (typeof(pos))((char *)(pos) + (pos)->next_offset))
+
+/* can only be xt_entry_match, so no use of typeof here */
+#define xt_ematch_foreach(pos, entry) \
+	for ((pos) = (struct xt_entry_match *)entry->elems; \
+	     (pos) < (struct xt_entry_match *)((char *)(entry) + \
+	             (entry)->target_offset); \
+	     (pos) = (struct xt_entry_match *)((char *)(pos) + \
+	             (pos)->u.match_size))
+
+#ifdef __KERNEL__
+
+#include <linux/netdevice.h>
+
+/**
+ * struct xt_action_param - parameters for matches/targets
+ *
+ * @match:	the match extension
+ * @target:	the target extension
+ * @matchinfo:	per-match data
+ * @targetinfo:	per-target data
+ * @in:		input netdevice
+ * @out:	output netdevice
+ * @fragoff:	packet is a fragment, this is the data offset
+ * @thoff:	position of transport header relative to skb->data
+ * @hook:	hook number given packet came from
+ * @family:	Actual NFPROTO_* through which the function is invoked
+ * 		(helpful when match->family == NFPROTO_UNSPEC)
+ *
+ * Fields written to by extensions:
+ *
+ * @hotdrop:	drop packet if we had inspection problems
+ * Network namespace obtainable using dev_net(in/out)
+ */
+struct xt_action_param {
+	union {
+		const struct xt_match *match;
+		const struct xt_target *target;
+	};
+	union {
+		const void *matchinfo, *targinfo;
+	};
+	const struct net_device *in, *out;
+	int fragoff;
+	unsigned int thoff;
+	unsigned int hooknum;
+	u_int8_t family;
+	bool hotdrop;
+};
+
+/**
+ * struct xt_mtchk_param - parameters for match extensions'
+ * checkentry functions
+ *
+ * @net:	network namespace through which the check was invoked
+ * @table:	table the rule is tried to be inserted into
+ * @entryinfo:	the family-specific rule data
+ * 		(struct ipt_ip, ip6t_ip, arpt_arp or (note) ebt_entry)
+ * @match:	struct xt_match through which this function was invoked
+ * @matchinfo:	per-match data
+ * @hook_mask:	via which hooks the new rule is reachable
+ * Other fields as above.
+ */
+struct xt_mtchk_param {
+	struct net *net;
+	const char *table;
+	const void *entryinfo;
+	const struct xt_match *match;
+	void *matchinfo;
+	unsigned int hook_mask;
+	u_int8_t family;
+};
+
+/**
+ * struct xt_mdtor_param - match destructor parameters
+ * Fields as above.
+ */
+struct xt_mtdtor_param {
+	struct net *net;
+	const struct xt_match *match;
+	void *matchinfo;
+	u_int8_t family;
+};
+
+/**
+ * struct xt_tgchk_param - parameters for target extensions'
+ * checkentry functions
+ *
+ * @entryinfo:	the family-specific rule data
+ * 		(struct ipt_entry, ip6t_entry, arpt_entry, ebt_entry)
+ *
+ * Other fields see above.
+ */
+struct xt_tgchk_param {
+	struct net *net;
+	const char *table;
+	const void *entryinfo;
+	const struct xt_target *target;
+	void *targinfo;
+	unsigned int hook_mask;
+	u_int8_t family;
+};
+
+/* Target destructor parameters */
+struct xt_tgdtor_param {
+	struct net *net;
+	const struct xt_target *target;
+	void *targinfo;
+	u_int8_t family;
+};
+
+struct xt_match {
+	struct list_head list;
+
+	const char name[XT_EXTENSION_MAXNAMELEN];
+	u_int8_t revision;
+
+	/* Return true or false: return FALSE and set *hotdrop = 1 to
+           force immediate packet drop. */
+	/* Arguments changed since 2.6.9, as this must now handle
+	   non-linear skb, using skb_header_pointer and
+	   skb_ip_make_writable. */
+	bool (*match)(const struct sk_buff *skb,
+		      struct xt_action_param *);
+
+	/* Called when user tries to insert an entry of this type. */
+	int (*checkentry)(const struct xt_mtchk_param *);
+
+	/* Called when entry of this type deleted. */
+	void (*destroy)(const struct xt_mtdtor_param *);
+#ifdef CONFIG_COMPAT
+	/* Called when userspace align differs from kernel space one */
+	void (*compat_from_user)(void *dst, const void *src);
+	int (*compat_to_user)(void __user *dst, const void *src);
+#endif
+	/* Set this to THIS_MODULE if you are a module, otherwise NULL */
+	struct module *me;
+
+	const char *table;
+	unsigned int matchsize;
+#ifdef CONFIG_COMPAT
+	unsigned int compatsize;
+#endif
+	unsigned int hooks;
+	unsigned short proto;
+
+	unsigned short family;
+};
+
+/* Registration hooks for targets. */
+struct xt_target {
+	struct list_head list;
+
+	const char name[XT_EXTENSION_MAXNAMELEN];
+	u_int8_t revision;
+
+	/* Returns verdict. Argument order changed since 2.6.9, as this
+	   must now handle non-linear skbs, using skb_copy_bits and
+	   skb_ip_make_writable. */
+	unsigned int (*target)(struct sk_buff *skb,
+			       const struct xt_action_param *);
+
+	/* Called when user tries to insert an entry of this type:
+           hook_mask is a bitmask of hooks from which it can be
+           called. */
+	/* Should return 0 on success or an error code otherwise (-Exxxx). */
+	int (*checkentry)(const struct xt_tgchk_param *);
+
+	/* Called when entry of this type deleted. */
+	void (*destroy)(const struct xt_tgdtor_param *);
+#ifdef CONFIG_COMPAT
+	/* Called when userspace align differs from kernel space one */
+	void (*compat_from_user)(void *dst, const void *src);
+	int (*compat_to_user)(void __user *dst, const void *src);
+#endif
+	/* Set this to THIS_MODULE if you are a module, otherwise NULL */
+	struct module *me;
+
+	const char *table;
+	unsigned int targetsize;
+#ifdef CONFIG_COMPAT
+	unsigned int compatsize;
+#endif
+	unsigned int hooks;
+	unsigned short proto;
+
+	unsigned short family;
+};
+
+/* Furniture shopping... */
+struct xt_table {
+	struct list_head list;
+
+	/* What hooks you will enter on */
+	unsigned int valid_hooks;
+
+	/* Man behind the curtain... */
+	struct xt_table_info *private;
+
+	/* Set this to THIS_MODULE if you are a module, otherwise NULL */
+	struct module *me;
+
+	u_int8_t af;		/* address/protocol family */
+	int priority;		/* hook order */
+
+	/* A unique name... */
+	const char name[XT_TABLE_MAXNAMELEN];
+};
+
+#include <linux/netfilter_ipv4.h>
+
+/* The table itself */
+struct xt_table_info {
+	/* Size per table */
+	unsigned int size;
+	/* Number of entries: FIXME. --RR */
+	unsigned int number;
+	/* Initial number of entries. Needed for module usage count */
+	unsigned int initial_entries;
+
+	/* Entry points and underflows */
+	unsigned int hook_entry[NF_INET_NUMHOOKS];
+	unsigned int underflow[NF_INET_NUMHOOKS];
+
+	/*
+	 * Number of user chains. Since tables cannot have loops, at most
+	 * @stacksize jumps (number of user chains) can possibly be made.
+	 */
+	unsigned int stacksize;
+	unsigned int __percpu *stackptr;
+	void ***jumpstack;
+	/* ipt_entry tables: one per CPU */
+	/* Note : this field MUST be the last one, see XT_TABLE_INFO_SZ */
+	void *entries[1];
+};
+
+#define XT_TABLE_INFO_SZ (offsetof(struct xt_table_info, entries) \
+			  + nr_cpu_ids * sizeof(char *))
+extern int xt_register_target(struct xt_target *target);
+extern void xt_unregister_target(struct xt_target *target);
+extern int xt_register_targets(struct xt_target *target, unsigned int n);
+extern void xt_unregister_targets(struct xt_target *target, unsigned int n);
+
+extern int xt_register_match(struct xt_match *target);
+extern void xt_unregister_match(struct xt_match *target);
+extern int xt_register_matches(struct xt_match *match, unsigned int n);
+extern void xt_unregister_matches(struct xt_match *match, unsigned int n);
+
+extern int xt_check_match(struct xt_mtchk_param *,
+			  unsigned int size, u_int8_t proto, bool inv_proto);
+extern int xt_check_target(struct xt_tgchk_param *,
+			   unsigned int size, u_int8_t proto, bool inv_proto);
+
+extern struct xt_table *xt_register_table(struct net *net,
+					  const struct xt_table *table,
+					  struct xt_table_info *bootstrap,
+					  struct xt_table_info *newinfo);
+extern void *xt_unregister_table(struct xt_table *table);
+
+extern struct xt_table_info *xt_replace_table(struct xt_table *table,
+					      unsigned int num_counters,
+					      struct xt_table_info *newinfo,
+					      int *error);
+
+extern struct xt_match *xt_find_match(u8 af, const char *name, u8 revision);
+extern struct xt_target *xt_find_target(u8 af, const char *name, u8 revision);
+extern struct xt_match *xt_request_find_match(u8 af, const char *name,
+					      u8 revision);
+extern struct xt_target *xt_request_find_target(u8 af, const char *name,
+						u8 revision);
+extern int xt_find_revision(u8 af, const char *name, u8 revision,
+			    int target, int *err);
+
+extern struct xt_table *xt_find_table_lock(struct net *net, u_int8_t af,
+					   const char *name);
+extern void xt_table_unlock(struct xt_table *t);
+
+extern int xt_proto_init(struct net *net, u_int8_t af);
+extern void xt_proto_fini(struct net *net, u_int8_t af);
+
+extern struct xt_table_info *xt_alloc_table_info(unsigned int size);
+extern void xt_free_table_info(struct xt_table_info *info);
+
+/**
+ * xt_recseq - recursive seqcount for netfilter use
+ * 
+ * Packet processing changes the seqcount only if no recursion happened
+ * get_counters() can use read_seqcount_begin()/read_seqcount_retry(),
+ * because we use the normal seqcount convention :
+ * Low order bit set to 1 if a writer is active.
+ */
+DECLARE_PER_CPU(seqcount_t, xt_recseq);
+
+/**
+ * xt_write_recseq_begin - start of a write section
+ *
+ * Begin packet processing : all readers must wait the end
+ * 1) Must be called with preemption disabled
+ * 2) softirqs must be disabled too (or we should use this_cpu_add())
+ * Returns :
+ *  1 if no recursion on this cpu
+ *  0 if recursion detected
+ */
+static inline unsigned int xt_write_recseq_begin(void)
+{
+	unsigned int addend;
+
+	/*
+	 * Low order bit of sequence is set if we already
+	 * called xt_write_recseq_begin().
+	 */
+	addend = (__this_cpu_read(xt_recseq.sequence) + 1) & 1;
+
+	/*
+	 * This is kind of a write_seqcount_begin(), but addend is 0 or 1
+	 * We dont check addend value to avoid a test and conditional jump,
+	 * since addend is most likely 1
+	 */
+	__this_cpu_add(xt_recseq.sequence, addend);
+	smp_wmb();
+
+	return addend;
+}
+
+/**
+ * xt_write_recseq_end - end of a write section
+ * @addend: return value from previous xt_write_recseq_begin()
+ *
+ * End packet processing : all readers can proceed
+ * 1) Must be called with preemption disabled
+ * 2) softirqs must be disabled too (or we should use this_cpu_add())
+ */
+static inline void xt_write_recseq_end(unsigned int addend)
+{
+	/* this is kind of a write_seqcount_end(), but addend is 0 or 1 */
+	smp_wmb();
+	__this_cpu_add(xt_recseq.sequence, addend);
+}
+
+/*
+ * This helper is performance critical and must be inlined
+ */
+static inline unsigned long ifname_compare_aligned(const char *_a,
+						   const char *_b,
+						   const char *_mask)
+{
+	const unsigned long *a = (const unsigned long *)_a;
+	const unsigned long *b = (const unsigned long *)_b;
+	const unsigned long *mask = (const unsigned long *)_mask;
+	unsigned long ret;
+
+	ret = (a[0] ^ b[0]) & mask[0];
+	if (IFNAMSIZ > sizeof(unsigned long))
+		ret |= (a[1] ^ b[1]) & mask[1];
+	if (IFNAMSIZ > 2 * sizeof(unsigned long))
+		ret |= (a[2] ^ b[2]) & mask[2];
+	if (IFNAMSIZ > 3 * sizeof(unsigned long))
+		ret |= (a[3] ^ b[3]) & mask[3];
+	BUILD_BUG_ON(IFNAMSIZ > 4 * sizeof(unsigned long));
+	return ret;
+}
+
+extern struct nf_hook_ops *xt_hook_link(const struct xt_table *, nf_hookfn *);
+extern void xt_hook_unlink(const struct xt_table *, struct nf_hook_ops *);
+
+#ifdef CONFIG_COMPAT
+#include <net/compat.h>
+
+struct compat_xt_entry_match {
+	union {
+		struct {
+			u_int16_t match_size;
+			char name[XT_FUNCTION_MAXNAMELEN - 1];
+			u_int8_t revision;
+		} user;
+		struct {
+			u_int16_t match_size;
+			compat_uptr_t match;
+		} kernel;
+		u_int16_t match_size;
+	} u;
+	unsigned char data[0];
+};
+
+struct compat_xt_entry_target {
+	union {
+		struct {
+			u_int16_t target_size;
+			char name[XT_FUNCTION_MAXNAMELEN - 1];
+			u_int8_t revision;
+		} user;
+		struct {
+			u_int16_t target_size;
+			compat_uptr_t target;
+		} kernel;
+		u_int16_t target_size;
+	} u;
+	unsigned char data[0];
+};
+
+/* FIXME: this works only on 32 bit tasks
+ * need to change whole approach in order to calculate align as function of
+ * current task alignment */
+
+struct compat_xt_counters {
+	compat_u64 pcnt, bcnt;			/* Packet and byte counters */
+};
+
+struct compat_xt_counters_info {
+	char name[XT_TABLE_MAXNAMELEN];
+	compat_uint_t num_counters;
+	struct compat_xt_counters counters[0];
+};
+
+struct _compat_xt_align {
+	__u8 u8;
+	__u16 u16;
+	__u32 u32;
+	compat_u64 u64;
+};
+
+#define COMPAT_XT_ALIGN(s) __ALIGN_KERNEL((s), __alignof__(struct _compat_xt_align))
+
+extern void xt_compat_lock(u_int8_t af);
+extern void xt_compat_unlock(u_int8_t af);
+
+extern int xt_compat_add_offset(u_int8_t af, unsigned int offset, int delta);
+extern void xt_compat_flush_offsets(u_int8_t af);
+extern void xt_compat_init_offsets(u_int8_t af, unsigned int number);
+extern int xt_compat_calc_jump(u_int8_t af, unsigned int offset);
+
+extern int xt_compat_match_offset(const struct xt_match *match);
+extern int xt_compat_match_from_user(struct xt_entry_match *m,
+				     void **dstptr, unsigned int *size);
+extern int xt_compat_match_to_user(const struct xt_entry_match *m,
+				   void __user **dstptr, unsigned int *size);
+
+extern int xt_compat_target_offset(const struct xt_target *target);
+extern void xt_compat_target_from_user(struct xt_entry_target *t,
+				       void **dstptr, unsigned int *size);
+extern int xt_compat_target_to_user(const struct xt_entry_target *t,
+				    void __user **dstptr, unsigned int *size);
+
+#endif /* CONFIG_COMPAT */
+#endif /* __KERNEL__ */
+
+#endif /* _X_TABLES_H */
diff --git a/include/linux/netfilter/xt_AUDIT.h b/include/linux/netfilter/xt_AUDIT.h
new file mode 100644
index 00000000..38751d2e
--- /dev/null
+++ b/include/linux/netfilter/xt_AUDIT.h
@@ -0,0 +1,30 @@
+/*
+ * Header file for iptables xt_AUDIT target
+ *
+ * (C) 2010-2011 Thomas Graf <tgraf@redhat.com>
+ * (C) 2010-2011 Red Hat, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _XT_AUDIT_TARGET_H
+#define _XT_AUDIT_TARGET_H
+
+#include <linux/types.h>
+
+enum {
+	XT_AUDIT_TYPE_ACCEPT = 0,
+	XT_AUDIT_TYPE_DROP,
+	XT_AUDIT_TYPE_REJECT,
+	__XT_AUDIT_TYPE_MAX,
+};
+
+#define XT_AUDIT_TYPE_MAX (__XT_AUDIT_TYPE_MAX - 1)
+
+struct xt_audit_info {
+	__u8 type; /* XT_AUDIT_TYPE_* */
+};
+
+#endif /* _XT_AUDIT_TARGET_H */
diff --git a/include/linux/netfilter/xt_CHECKSUM.h b/include/linux/netfilter/xt_CHECKSUM.h
new file mode 100644
index 00000000..9a2e4661
--- /dev/null
+++ b/include/linux/netfilter/xt_CHECKSUM.h
@@ -0,0 +1,20 @@
+/* Header file for iptables ipt_CHECKSUM target
+ *
+ * (C) 2002 by Harald Welte <laforge@gnumonks.org>
+ * (C) 2010 Red Hat Inc
+ * Author: Michael S. Tsirkin <mst@redhat.com>
+ *
+ * This software is distributed under GNU GPL v2, 1991
+*/
+#ifndef _XT_CHECKSUM_TARGET_H
+#define _XT_CHECKSUM_TARGET_H
+
+#include <linux/types.h>
+
+#define XT_CHECKSUM_OP_FILL	0x01	/* fill in checksum in IP header */
+
+struct xt_CHECKSUM_info {
+	__u8 operation;	/* bitset of operations */
+};
+
+#endif /* _XT_CHECKSUM_TARGET_H */
diff --git a/include/linux/netfilter/xt_CLASSIFY.h b/include/linux/netfilter/xt_CLASSIFY.h
new file mode 100644
index 00000000..a813bf14
--- /dev/null
+++ b/include/linux/netfilter/xt_CLASSIFY.h
@@ -0,0 +1,10 @@
+#ifndef _XT_CLASSIFY_H
+#define _XT_CLASSIFY_H
+
+#include <linux/types.h>
+
+struct xt_classify_target_info {
+	__u32 priority;
+};
+
+#endif /*_XT_CLASSIFY_H */
diff --git a/include/linux/netfilter/xt_CONNMARK.h b/include/linux/netfilter/xt_CONNMARK.h
new file mode 100644
index 00000000..2f2e48ec
--- /dev/null
+++ b/include/linux/netfilter/xt_CONNMARK.h
@@ -0,0 +1,6 @@
+#ifndef _XT_CONNMARK_H_target
+#define _XT_CONNMARK_H_target
+
+#include <linux/netfilter/xt_connmark.h>
+
+#endif /*_XT_CONNMARK_H_target*/
diff --git a/include/linux/netfilter/xt_CONNSECMARK.h b/include/linux/netfilter/xt_CONNSECMARK.h
new file mode 100644
index 00000000..b973ff80
--- /dev/null
+++ b/include/linux/netfilter/xt_CONNSECMARK.h
@@ -0,0 +1,15 @@
+#ifndef _XT_CONNSECMARK_H_target
+#define _XT_CONNSECMARK_H_target
+
+#include <linux/types.h>
+
+enum {
+	CONNSECMARK_SAVE = 1,
+	CONNSECMARK_RESTORE,
+};
+
+struct xt_connsecmark_target_info {
+	__u8 mode;
+};
+
+#endif /*_XT_CONNSECMARK_H_target */
diff --git a/include/linux/netfilter/xt_CT.h b/include/linux/netfilter/xt_CT.h
new file mode 100644
index 00000000..a064b8af
--- /dev/null
+++ b/include/linux/netfilter/xt_CT.h
@@ -0,0 +1,31 @@
+#ifndef _XT_CT_H
+#define _XT_CT_H
+
+#include <linux/types.h>
+
+#define XT_CT_NOTRACK	0x1
+
+struct xt_ct_target_info {
+	__u16 flags;
+	__u16 zone;
+	__u32 ct_events;
+	__u32 exp_events;
+	char helper[16];
+
+	/* Used internally by the kernel */
+	struct nf_conn	*ct __attribute__((aligned(8)));
+};
+
+struct xt_ct_target_info_v1 {
+	__u16 flags;
+	__u16 zone;
+	__u32 ct_events;
+	__u32 exp_events;
+	char helper[16];
+	char timeout[32];
+
+	/* Used internally by the kernel */
+	struct nf_conn	*ct __attribute__((aligned(8)));
+};
+
+#endif /* _XT_CT_H */
diff --git a/include/linux/netfilter/xt_DSCP.h b/include/linux/netfilter/xt_DSCP.h
new file mode 100644
index 00000000..648e0b3b
--- /dev/null
+++ b/include/linux/netfilter/xt_DSCP.h
@@ -0,0 +1,26 @@
+/* x_tables module for setting the IPv4/IPv6 DSCP field
+ *
+ * (C) 2002 Harald Welte <laforge@gnumonks.org>
+ * based on ipt_FTOS.c (C) 2000 by Matthew G. Marsh <mgm@paktronix.com>
+ * This software is distributed under GNU GPL v2, 1991
+ *
+ * See RFC2474 for a description of the DSCP field within the IP Header.
+ *
+ * xt_DSCP.h,v 1.7 2002/03/14 12:03:13 laforge Exp
+*/
+#ifndef _XT_DSCP_TARGET_H
+#define _XT_DSCP_TARGET_H
+#include <linux/netfilter/xt_dscp.h>
+#include <linux/types.h>
+
+/* target info */
+struct xt_DSCP_info {
+	__u8 dscp;
+};
+
+struct xt_tos_target_info {
+	__u8 tos_value;
+	__u8 tos_mask;
+};
+
+#endif /* _XT_DSCP_TARGET_H */
diff --git a/include/linux/netfilter/xt_IDLETIMER.h b/include/linux/netfilter/xt_IDLETIMER.h
new file mode 100644
index 00000000..faaa28b3
--- /dev/null
+++ b/include/linux/netfilter/xt_IDLETIMER.h
@@ -0,0 +1,53 @@
+/*
+ * linux/include/linux/netfilter/xt_IDLETIMER.h
+ *
+ * Header file for Xtables timer target module.
+ *
+ * Copyright (C) 2004, 2010 Nokia Corporation
+ *
+ * Written by Timo Teras <ext-timo.teras@nokia.com>
+ *
+ * Converted to x_tables and forward-ported to 2.6.34
+ * by Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef _XT_IDLETIMER_H
+#define _XT_IDLETIMER_H
+
+#include <linux/types.h>
+
+#define MAX_IDLETIMER_LABEL_SIZE 28
+#define NLMSG_MAX_SIZE 64
+
+#define NL_EVENT_TYPE_INACTIVE 0
+#define NL_EVENT_TYPE_ACTIVE 1
+
+struct idletimer_tg_info {
+	__u32 timeout;
+
+	char label[MAX_IDLETIMER_LABEL_SIZE];
+
+	/* Use netlink messages for notification in addition to sysfs */
+	__u8 send_nl_msg;
+
+	/* for kernel module internal use only */
+	struct idletimer_tg *timer __attribute__((aligned(8)));
+};
+
+#endif
diff --git a/include/linux/netfilter/xt_LED.h b/include/linux/netfilter/xt_LED.h
new file mode 100644
index 00000000..f5509e75
--- /dev/null
+++ b/include/linux/netfilter/xt_LED.h
@@ -0,0 +1,15 @@
+#ifndef _XT_LED_H
+#define _XT_LED_H
+
+#include <linux/types.h>
+
+struct xt_led_info {
+	char id[27];        /* Unique ID for this trigger in the LED class */
+	__u8 always_blink;  /* Blink even if the LED is already on */
+	__u32 delay;        /* Delay until LED is switched off after trigger */
+
+	/* Kernel data used in the module */
+	void *internal_data __attribute__((aligned(8)));
+};
+
+#endif /* _XT_LED_H */
diff --git a/include/linux/netfilter/xt_LOG.h b/include/linux/netfilter/xt_LOG.h
new file mode 100644
index 00000000..cac07909
--- /dev/null
+++ b/include/linux/netfilter/xt_LOG.h
@@ -0,0 +1,19 @@
+#ifndef _XT_LOG_H
+#define _XT_LOG_H
+
+/* make sure not to change this without changing nf_log.h:NF_LOG_* (!) */
+#define XT_LOG_TCPSEQ		0x01	/* Log TCP sequence numbers */
+#define XT_LOG_TCPOPT		0x02	/* Log TCP options */
+#define XT_LOG_IPOPT		0x04	/* Log IP options */
+#define XT_LOG_UID		0x08	/* Log UID owning local socket */
+#define XT_LOG_NFLOG		0x10	/* Unsupported, don't reuse */
+#define XT_LOG_MACDECODE	0x20	/* Decode MAC header */
+#define XT_LOG_MASK		0x2f
+
+struct xt_log_info {
+	unsigned char level;
+	unsigned char logflags;
+	char prefix[30];
+};
+
+#endif /* _XT_LOG_H */
diff --git a/include/linux/netfilter/xt_MARK.h b/include/linux/netfilter/xt_MARK.h
new file mode 100644
index 00000000..41c456de
--- /dev/null
+++ b/include/linux/netfilter/xt_MARK.h
@@ -0,0 +1,6 @@
+#ifndef _XT_MARK_H_target
+#define _XT_MARK_H_target
+
+#include <linux/netfilter/xt_mark.h>
+
+#endif /*_XT_MARK_H_target */
diff --git a/include/linux/netfilter/xt_NFLOG.h b/include/linux/netfilter/xt_NFLOG.h
new file mode 100644
index 00000000..87b58311
--- /dev/null
+++ b/include/linux/netfilter/xt_NFLOG.h
@@ -0,0 +1,20 @@
+#ifndef _XT_NFLOG_TARGET
+#define _XT_NFLOG_TARGET
+
+#include <linux/types.h>
+
+#define XT_NFLOG_DEFAULT_GROUP		0x1
+#define XT_NFLOG_DEFAULT_THRESHOLD	0
+
+#define XT_NFLOG_MASK			0x0
+
+struct xt_nflog_info {
+	__u32	len;
+	__u16	group;
+	__u16	threshold;
+	__u16	flags;
+	__u16	pad;
+	char		prefix[64];
+};
+
+#endif /* _XT_NFLOG_TARGET */
diff --git a/include/linux/netfilter/xt_NFQUEUE.h b/include/linux/netfilter/xt_NFQUEUE.h
new file mode 100644
index 00000000..9eafdbbb
--- /dev/null
+++ b/include/linux/netfilter/xt_NFQUEUE.h
@@ -0,0 +1,29 @@
+/* iptables module for using NFQUEUE mechanism
+ *
+ * (C) 2005 Harald Welte <laforge@netfilter.org>
+ *
+ * This software is distributed under GNU GPL v2, 1991
+ * 
+*/
+#ifndef _XT_NFQ_TARGET_H
+#define _XT_NFQ_TARGET_H
+
+#include <linux/types.h>
+
+/* target info */
+struct xt_NFQ_info {
+	__u16 queuenum;
+};
+
+struct xt_NFQ_info_v1 {
+	__u16 queuenum;
+	__u16 queues_total;
+};
+
+struct xt_NFQ_info_v2 {
+	__u16 queuenum;
+	__u16 queues_total;
+	__u16 bypass;
+};
+
+#endif /* _XT_NFQ_TARGET_H */
diff --git a/include/linux/netfilter/xt_RATEEST.h b/include/linux/netfilter/xt_RATEEST.h
new file mode 100644
index 00000000..6605e20a
--- /dev/null
+++ b/include/linux/netfilter/xt_RATEEST.h
@@ -0,0 +1,15 @@
+#ifndef _XT_RATEEST_TARGET_H
+#define _XT_RATEEST_TARGET_H
+
+#include <linux/types.h>
+
+struct xt_rateest_target_info {
+	char			name[IFNAMSIZ];
+	__s8			interval;
+	__u8		ewma_log;
+
+	/* Used internally by the kernel */
+	struct xt_rateest	*est __attribute__((aligned(8)));
+};
+
+#endif /* _XT_RATEEST_TARGET_H */
diff --git a/include/linux/netfilter/xt_SECMARK.h b/include/linux/netfilter/xt_SECMARK.h
new file mode 100644
index 00000000..989092bd
--- /dev/null
+++ b/include/linux/netfilter/xt_SECMARK.h
@@ -0,0 +1,22 @@
+#ifndef _XT_SECMARK_H_target
+#define _XT_SECMARK_H_target
+
+#include <linux/types.h>
+
+/*
+ * This is intended for use by various security subsystems (but not
+ * at the same time).
+ *
+ * 'mode' refers to the specific security subsystem which the
+ * packets are being marked for.
+ */
+#define SECMARK_MODE_SEL	0x01		/* SELinux */
+#define SECMARK_SECCTX_MAX	256
+
+struct xt_secmark_target_info {
+	__u8 mode;
+	__u32 secid;
+	char secctx[SECMARK_SECCTX_MAX];
+};
+
+#endif /*_XT_SECMARK_H_target */
diff --git a/include/linux/netfilter/xt_TCPMSS.h b/include/linux/netfilter/xt_TCPMSS.h
new file mode 100644
index 00000000..9a6960af
--- /dev/null
+++ b/include/linux/netfilter/xt_TCPMSS.h
@@ -0,0 +1,12 @@
+#ifndef _XT_TCPMSS_H
+#define _XT_TCPMSS_H
+
+#include <linux/types.h>
+
+struct xt_tcpmss_info {
+	__u16 mss;
+};
+
+#define XT_TCPMSS_CLAMP_PMTU 0xffff
+
+#endif /* _XT_TCPMSS_H */
diff --git a/include/linux/netfilter/xt_TCPOPTSTRIP.h b/include/linux/netfilter/xt_TCPOPTSTRIP.h
new file mode 100644
index 00000000..71573184
--- /dev/null
+++ b/include/linux/netfilter/xt_TCPOPTSTRIP.h
@@ -0,0 +1,15 @@
+#ifndef _XT_TCPOPTSTRIP_H
+#define _XT_TCPOPTSTRIP_H
+
+#include <linux/types.h>
+
+#define tcpoptstrip_set_bit(bmap, idx) \
+	(bmap[(idx) >> 5] |= 1U << (idx & 31))
+#define tcpoptstrip_test_bit(bmap, idx) \
+	(((1U << (idx & 31)) & bmap[(idx) >> 5]) != 0)
+
+struct xt_tcpoptstrip_target_info {
+	__u32 strip_bmap[8];
+};
+
+#endif /* _XT_TCPOPTSTRIP_H */
diff --git a/include/linux/netfilter/xt_TEE.h b/include/linux/netfilter/xt_TEE.h
new file mode 100644
index 00000000..5c21d5c8
--- /dev/null
+++ b/include/linux/netfilter/xt_TEE.h
@@ -0,0 +1,12 @@
+#ifndef _XT_TEE_TARGET_H
+#define _XT_TEE_TARGET_H
+
+struct xt_tee_tginfo {
+	union nf_inet_addr gw;
+	char oif[16];
+
+	/* used internally by the kernel */
+	struct xt_tee_priv *priv __attribute__((aligned(8)));
+};
+
+#endif /* _XT_TEE_TARGET_H */
diff --git a/include/linux/netfilter/xt_TPROXY.h b/include/linux/netfilter/xt_TPROXY.h
new file mode 100644
index 00000000..902043c2
--- /dev/null
+++ b/include/linux/netfilter/xt_TPROXY.h
@@ -0,0 +1,23 @@
+#ifndef _XT_TPROXY_H
+#define _XT_TPROXY_H
+
+#include <linux/types.h>
+
+/* TPROXY target is capable of marking the packet to perform
+ * redirection. We can get rid of that whenever we get support for
+ * mutliple targets in the same rule. */
+struct xt_tproxy_target_info {
+	__u32 mark_mask;
+	__u32 mark_value;
+	__be32 laddr;
+	__be16 lport;
+};
+
+struct xt_tproxy_target_info_v1 {
+	__u32 mark_mask;
+	__u32 mark_value;
+	union nf_inet_addr laddr;
+	__be16 lport;
+};
+
+#endif /* _XT_TPROXY_H */
diff --git a/include/linux/netfilter/xt_addrtype.h b/include/linux/netfilter/xt_addrtype.h
new file mode 100644
index 00000000..b156baa9
--- /dev/null
+++ b/include/linux/netfilter/xt_addrtype.h
@@ -0,0 +1,44 @@
+#ifndef _XT_ADDRTYPE_H
+#define _XT_ADDRTYPE_H
+
+#include <linux/types.h>
+
+enum {
+	XT_ADDRTYPE_INVERT_SOURCE	= 0x0001,
+	XT_ADDRTYPE_INVERT_DEST		= 0x0002,
+	XT_ADDRTYPE_LIMIT_IFACE_IN	= 0x0004,
+	XT_ADDRTYPE_LIMIT_IFACE_OUT	= 0x0008,
+};
+
+
+/* rtn_type enum values from rtnetlink.h, but shifted */
+enum {
+	XT_ADDRTYPE_UNSPEC = 1 << 0,
+	XT_ADDRTYPE_UNICAST = 1 << 1,	/* 1 << RTN_UNICAST */
+	XT_ADDRTYPE_LOCAL  = 1 << 2,	/* 1 << RTN_LOCAL, etc */
+	XT_ADDRTYPE_BROADCAST = 1 << 3,
+	XT_ADDRTYPE_ANYCAST = 1 << 4,
+	XT_ADDRTYPE_MULTICAST = 1 << 5,
+	XT_ADDRTYPE_BLACKHOLE = 1 << 6,
+	XT_ADDRTYPE_UNREACHABLE = 1 << 7,
+	XT_ADDRTYPE_PROHIBIT = 1 << 8,
+	XT_ADDRTYPE_THROW = 1 << 9,
+	XT_ADDRTYPE_NAT = 1 << 10,
+	XT_ADDRTYPE_XRESOLVE = 1 << 11,
+};
+
+struct xt_addrtype_info_v1 {
+	__u16	source;		/* source-type mask */
+	__u16	dest;		/* dest-type mask */
+	__u32	flags;
+};
+
+/* revision 0 */
+struct xt_addrtype_info {
+	__u16	source;		/* source-type mask */
+	__u16	dest;		/* dest-type mask */
+	__u32	invert_source;
+	__u32	invert_dest;
+};
+
+#endif
diff --git a/include/linux/netfilter/xt_cluster.h b/include/linux/netfilter/xt_cluster.h
new file mode 100644
index 00000000..9b883c8f
--- /dev/null
+++ b/include/linux/netfilter/xt_cluster.h
@@ -0,0 +1,19 @@
+#ifndef _XT_CLUSTER_MATCH_H
+#define _XT_CLUSTER_MATCH_H
+
+#include <linux/types.h>
+
+enum xt_cluster_flags {
+	XT_CLUSTER_F_INV	= (1 << 0)
+};
+
+struct xt_cluster_match_info {
+	__u32 total_nodes;
+	__u32 node_mask;
+	__u32 hash_seed;
+	__u32 flags;
+};
+
+#define XT_CLUSTER_NODES_MAX	32
+
+#endif /* _XT_CLUSTER_MATCH_H */
diff --git a/include/linux/netfilter/xt_comment.h b/include/linux/netfilter/xt_comment.h
new file mode 100644
index 00000000..0ea5e79f
--- /dev/null
+++ b/include/linux/netfilter/xt_comment.h
@@ -0,0 +1,10 @@
+#ifndef _XT_COMMENT_H
+#define _XT_COMMENT_H
+
+#define XT_MAX_COMMENT_LEN 256
+
+struct xt_comment_info {
+	char comment[XT_MAX_COMMENT_LEN];
+};
+
+#endif /* XT_COMMENT_H */
diff --git a/include/linux/netfilter/xt_connbytes.h b/include/linux/netfilter/xt_connbytes.h
new file mode 100644
index 00000000..f1d6c15b
--- /dev/null
+++ b/include/linux/netfilter/xt_connbytes.h
@@ -0,0 +1,26 @@
+#ifndef _XT_CONNBYTES_H
+#define _XT_CONNBYTES_H
+
+#include <linux/types.h>
+
+enum xt_connbytes_what {
+	XT_CONNBYTES_PKTS,
+	XT_CONNBYTES_BYTES,
+	XT_CONNBYTES_AVGPKT,
+};
+
+enum xt_connbytes_direction {
+	XT_CONNBYTES_DIR_ORIGINAL,
+	XT_CONNBYTES_DIR_REPLY,
+	XT_CONNBYTES_DIR_BOTH,
+};
+
+struct xt_connbytes_info {
+	struct {
+		__aligned_u64 from;	/* count to be matched */
+		__aligned_u64 to;	/* count to be matched */
+	} count;
+	__u8 what;		/* ipt_connbytes_what */
+	__u8 direction;	/* ipt_connbytes_direction */
+};
+#endif
diff --git a/include/linux/netfilter/xt_connlimit.h b/include/linux/netfilter/xt_connlimit.h
new file mode 100644
index 00000000..d1366f05
--- /dev/null
+++ b/include/linux/netfilter/xt_connlimit.h
@@ -0,0 +1,37 @@
+#ifndef _XT_CONNLIMIT_H
+#define _XT_CONNLIMIT_H
+
+#include <linux/types.h>
+#include <linux/netfilter.h>
+
+struct xt_connlimit_data;
+
+enum {
+	XT_CONNLIMIT_INVERT = 1 << 0,
+	XT_CONNLIMIT_DADDR  = 1 << 1,
+};
+
+struct xt_connlimit_info {
+	union {
+		union nf_inet_addr mask;
+#ifndef __KERNEL__
+		union {
+			__be32 v4_mask;
+			__be32 v6_mask[4];
+		};
+#endif
+	};
+	unsigned int limit;
+	union {
+		/* revision 0 */
+		unsigned int inverse;
+
+		/* revision 1 */
+		__u32 flags;
+	};
+
+	/* Used internally by the kernel */
+	struct xt_connlimit_data *data __attribute__((aligned(8)));
+};
+
+#endif /* _XT_CONNLIMIT_H */
diff --git a/include/linux/netfilter/xt_connmark.h b/include/linux/netfilter/xt_connmark.h
new file mode 100644
index 00000000..efc17a83
--- /dev/null
+++ b/include/linux/netfilter/xt_connmark.h
@@ -0,0 +1,31 @@
+#ifndef _XT_CONNMARK_H
+#define _XT_CONNMARK_H
+
+#include <linux/types.h>
+
+/* Copyright (C) 2002,2004 MARA Systems AB <http://www.marasystems.com>
+ * by Henrik Nordstrom <hno@marasystems.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+enum {
+	XT_CONNMARK_SET = 0,
+	XT_CONNMARK_SAVE,
+	XT_CONNMARK_RESTORE
+};
+
+struct xt_connmark_tginfo1 {
+	__u32 ctmark, ctmask, nfmask;
+	__u8 mode;
+};
+
+struct xt_connmark_mtinfo1 {
+	__u32 mark, mask;
+	__u8 invert;
+};
+
+#endif /*_XT_CONNMARK_H*/
diff --git a/include/linux/netfilter/xt_conntrack.h b/include/linux/netfilter/xt_conntrack.h
new file mode 100644
index 00000000..e3c041d5
--- /dev/null
+++ b/include/linux/netfilter/xt_conntrack.h
@@ -0,0 +1,77 @@
+/* Header file for kernel module to match connection tracking information.
+ * GPL (C) 2001  Marc Boucher (marc@mbsi.ca).
+ */
+
+#ifndef _XT_CONNTRACK_H
+#define _XT_CONNTRACK_H
+
+#include <linux/types.h>
+#include <linux/netfilter.h>
+#include <linux/netfilter/nf_conntrack_tuple_common.h>
+
+#define XT_CONNTRACK_STATE_BIT(ctinfo) (1 << ((ctinfo)%IP_CT_IS_REPLY+1))
+#define XT_CONNTRACK_STATE_INVALID (1 << 0)
+
+#define XT_CONNTRACK_STATE_SNAT (1 << (IP_CT_NUMBER + 1))
+#define XT_CONNTRACK_STATE_DNAT (1 << (IP_CT_NUMBER + 2))
+#define XT_CONNTRACK_STATE_UNTRACKED (1 << (IP_CT_NUMBER + 3))
+
+/* flags, invflags: */
+enum {
+	XT_CONNTRACK_STATE        = 1 << 0,
+	XT_CONNTRACK_PROTO        = 1 << 1,
+	XT_CONNTRACK_ORIGSRC      = 1 << 2,
+	XT_CONNTRACK_ORIGDST      = 1 << 3,
+	XT_CONNTRACK_REPLSRC      = 1 << 4,
+	XT_CONNTRACK_REPLDST      = 1 << 5,
+	XT_CONNTRACK_STATUS       = 1 << 6,
+	XT_CONNTRACK_EXPIRES      = 1 << 7,
+	XT_CONNTRACK_ORIGSRC_PORT = 1 << 8,
+	XT_CONNTRACK_ORIGDST_PORT = 1 << 9,
+	XT_CONNTRACK_REPLSRC_PORT = 1 << 10,
+	XT_CONNTRACK_REPLDST_PORT = 1 << 11,
+	XT_CONNTRACK_DIRECTION    = 1 << 12,
+};
+
+struct xt_conntrack_mtinfo1 {
+	union nf_inet_addr origsrc_addr, origsrc_mask;
+	union nf_inet_addr origdst_addr, origdst_mask;
+	union nf_inet_addr replsrc_addr, replsrc_mask;
+	union nf_inet_addr repldst_addr, repldst_mask;
+	__u32 expires_min, expires_max;
+	__u16 l4proto;
+	__be16 origsrc_port, origdst_port;
+	__be16 replsrc_port, repldst_port;
+	__u16 match_flags, invert_flags;
+	__u8 state_mask, status_mask;
+};
+
+struct xt_conntrack_mtinfo2 {
+	union nf_inet_addr origsrc_addr, origsrc_mask;
+	union nf_inet_addr origdst_addr, origdst_mask;
+	union nf_inet_addr replsrc_addr, replsrc_mask;
+	union nf_inet_addr repldst_addr, repldst_mask;
+	__u32 expires_min, expires_max;
+	__u16 l4proto;
+	__be16 origsrc_port, origdst_port;
+	__be16 replsrc_port, repldst_port;
+	__u16 match_flags, invert_flags;
+	__u16 state_mask, status_mask;
+};
+
+struct xt_conntrack_mtinfo3 {
+	union nf_inet_addr origsrc_addr, origsrc_mask;
+	union nf_inet_addr origdst_addr, origdst_mask;
+	union nf_inet_addr replsrc_addr, replsrc_mask;
+	union nf_inet_addr repldst_addr, repldst_mask;
+	__u32 expires_min, expires_max;
+	__u16 l4proto;
+	__u16 origsrc_port, origdst_port;
+	__u16 replsrc_port, repldst_port;
+	__u16 match_flags, invert_flags;
+	__u16 state_mask, status_mask;
+	__u16 origsrc_port_high, origdst_port_high;
+	__u16 replsrc_port_high, repldst_port_high;
+};
+
+#endif /*_XT_CONNTRACK_H*/
diff --git a/include/linux/netfilter/xt_cpu.h b/include/linux/netfilter/xt_cpu.h
new file mode 100644
index 00000000..93c7f11d
--- /dev/null
+++ b/include/linux/netfilter/xt_cpu.h
@@ -0,0 +1,11 @@
+#ifndef _XT_CPU_H
+#define _XT_CPU_H
+
+#include <linux/types.h>
+
+struct xt_cpu_info {
+	__u32	cpu;
+	__u32	invert;
+};
+
+#endif /*_XT_CPU_H*/
diff --git a/include/linux/netfilter/xt_dccp.h b/include/linux/netfilter/xt_dccp.h
new file mode 100644
index 00000000..a579e1b6
--- /dev/null
+++ b/include/linux/netfilter/xt_dccp.h
@@ -0,0 +1,25 @@
+#ifndef _XT_DCCP_H_
+#define _XT_DCCP_H_
+
+#include <linux/types.h>
+
+#define XT_DCCP_SRC_PORTS	        0x01
+#define XT_DCCP_DEST_PORTS	        0x02
+#define XT_DCCP_TYPE			0x04
+#define XT_DCCP_OPTION			0x08
+
+#define XT_DCCP_VALID_FLAGS		0x0f
+
+struct xt_dccp_info {
+	__u16 dpts[2];  /* Min, Max */
+	__u16 spts[2];  /* Min, Max */
+
+	__u16 flags;
+	__u16 invflags;
+
+	__u16 typemask;
+	__u8 option;
+};
+
+#endif /* _XT_DCCP_H_ */
+
diff --git a/include/linux/netfilter/xt_devgroup.h b/include/linux/netfilter/xt_devgroup.h
new file mode 100644
index 00000000..1babde0e
--- /dev/null
+++ b/include/linux/netfilter/xt_devgroup.h
@@ -0,0 +1,21 @@
+#ifndef _XT_DEVGROUP_H
+#define _XT_DEVGROUP_H
+
+#include <linux/types.h>
+
+enum xt_devgroup_flags {
+	XT_DEVGROUP_MATCH_SRC	= 0x1,
+	XT_DEVGROUP_INVERT_SRC	= 0x2,
+	XT_DEVGROUP_MATCH_DST	= 0x4,
+	XT_DEVGROUP_INVERT_DST	= 0x8,
+};
+
+struct xt_devgroup_info {
+	__u32	flags;
+	__u32	src_group;
+	__u32	src_mask;
+	__u32	dst_group;
+	__u32	dst_mask;
+};
+
+#endif /* _XT_DEVGROUP_H */
diff --git a/include/linux/netfilter/xt_dscp.h b/include/linux/netfilter/xt_dscp.h
new file mode 100644
index 00000000..15f8932a
--- /dev/null
+++ b/include/linux/netfilter/xt_dscp.h
@@ -0,0 +1,31 @@
+/* x_tables module for matching the IPv4/IPv6 DSCP field
+ *
+ * (C) 2002 Harald Welte <laforge@gnumonks.org>
+ * This software is distributed under GNU GPL v2, 1991
+ *
+ * See RFC2474 for a description of the DSCP field within the IP Header.
+ *
+ * xt_dscp.h,v 1.3 2002/08/05 19:00:21 laforge Exp
+*/
+#ifndef _XT_DSCP_H
+#define _XT_DSCP_H
+
+#include <linux/types.h>
+
+#define XT_DSCP_MASK	0xfc	/* 11111100 */
+#define XT_DSCP_SHIFT	2
+#define XT_DSCP_MAX	0x3f	/* 00111111 */
+
+/* match info */
+struct xt_dscp_info {
+	__u8 dscp;
+	__u8 invert;
+};
+
+struct xt_tos_match_info {
+	__u8 tos_mask;
+	__u8 tos_value;
+	__u8 invert;
+};
+
+#endif /* _XT_DSCP_H */
diff --git a/include/linux/netfilter/xt_ecn.h b/include/linux/netfilter/xt_ecn.h
new file mode 100644
index 00000000..7158fca3
--- /dev/null
+++ b/include/linux/netfilter/xt_ecn.h
@@ -0,0 +1,35 @@
+/* iptables module for matching the ECN header in IPv4 and TCP header
+ *
+ * (C) 2002 Harald Welte <laforge@gnumonks.org>
+ *
+ * This software is distributed under GNU GPL v2, 1991
+ * 
+ * ipt_ecn.h,v 1.4 2002/08/05 19:39:00 laforge Exp
+*/
+#ifndef _XT_ECN_H
+#define _XT_ECN_H
+
+#include <linux/types.h>
+#include <linux/netfilter/xt_dscp.h>
+
+#define XT_ECN_IP_MASK	(~XT_DSCP_MASK)
+
+#define XT_ECN_OP_MATCH_IP	0x01
+#define XT_ECN_OP_MATCH_ECE	0x10
+#define XT_ECN_OP_MATCH_CWR	0x20
+
+#define XT_ECN_OP_MATCH_MASK	0xce
+
+/* match info */
+struct xt_ecn_info {
+	__u8 operation;
+	__u8 invert;
+	__u8 ip_ect;
+	union {
+		struct {
+			__u8 ect;
+		} tcp;
+	} proto;
+};
+
+#endif /* _XT_ECN_H */
diff --git a/include/linux/netfilter/xt_esp.h b/include/linux/netfilter/xt_esp.h
new file mode 100644
index 00000000..ee688240
--- /dev/null
+++ b/include/linux/netfilter/xt_esp.h
@@ -0,0 +1,15 @@
+#ifndef _XT_ESP_H
+#define _XT_ESP_H
+
+#include <linux/types.h>
+
+struct xt_esp {
+	__u32 spis[2];	/* Security Parameter Index */
+	__u8  invflags;	/* Inverse flags */
+};
+
+/* Values for "invflags" field in struct xt_esp. */
+#define XT_ESP_INV_SPI	0x01	/* Invert the sense of spi. */
+#define XT_ESP_INV_MASK	0x01	/* All possible flags. */
+
+#endif /*_XT_ESP_H*/
diff --git a/include/linux/netfilter/xt_hashlimit.h b/include/linux/netfilter/xt_hashlimit.h
new file mode 100644
index 00000000..b1925b59
--- /dev/null
+++ b/include/linux/netfilter/xt_hashlimit.h
@@ -0,0 +1,68 @@
+#ifndef _XT_HASHLIMIT_H
+#define _XT_HASHLIMIT_H
+
+#include <linux/types.h>
+
+/* timings are in milliseconds. */
+#define XT_HASHLIMIT_SCALE 10000
+/* 1/10,000 sec period => max of 10,000/sec.  Min rate is then 429490
+   seconds, or one every 59 hours. */
+
+/* details of this structure hidden by the implementation */
+struct xt_hashlimit_htable;
+
+enum {
+	XT_HASHLIMIT_HASH_DIP = 1 << 0,
+	XT_HASHLIMIT_HASH_DPT = 1 << 1,
+	XT_HASHLIMIT_HASH_SIP = 1 << 2,
+	XT_HASHLIMIT_HASH_SPT = 1 << 3,
+	XT_HASHLIMIT_INVERT   = 1 << 4,
+};
+
+struct hashlimit_cfg {
+	__u32 mode;	  /* bitmask of XT_HASHLIMIT_HASH_* */
+	__u32 avg;    /* Average secs between packets * scale */
+	__u32 burst;  /* Period multiplier for upper limit. */
+
+	/* user specified */
+	__u32 size;		/* how many buckets */
+	__u32 max;		/* max number of entries */
+	__u32 gc_interval;	/* gc interval */
+	__u32 expire;	/* when do entries expire? */
+};
+
+struct xt_hashlimit_info {
+	char name [IFNAMSIZ];		/* name */
+	struct hashlimit_cfg cfg;
+
+	/* Used internally by the kernel */
+	struct xt_hashlimit_htable *hinfo;
+	union {
+		void *ptr;
+		struct xt_hashlimit_info *master;
+	} u;
+};
+
+struct hashlimit_cfg1 {
+	__u32 mode;	  /* bitmask of XT_HASHLIMIT_HASH_* */
+	__u32 avg;    /* Average secs between packets * scale */
+	__u32 burst;  /* Period multiplier for upper limit. */
+
+	/* user specified */
+	__u32 size;		/* how many buckets */
+	__u32 max;		/* max number of entries */
+	__u32 gc_interval;	/* gc interval */
+	__u32 expire;	/* when do entries expire? */
+
+	__u8 srcmask, dstmask;
+};
+
+struct xt_hashlimit_mtinfo1 {
+	char name[IFNAMSIZ];
+	struct hashlimit_cfg1 cfg;
+
+	/* Used internally by the kernel */
+	struct xt_hashlimit_htable *hinfo __attribute__((aligned(8)));
+};
+
+#endif /*_XT_HASHLIMIT_H*/
diff --git a/include/linux/netfilter/xt_helper.h b/include/linux/netfilter/xt_helper.h
new file mode 100644
index 00000000..6b42763f
--- /dev/null
+++ b/include/linux/netfilter/xt_helper.h
@@ -0,0 +1,8 @@
+#ifndef _XT_HELPER_H
+#define _XT_HELPER_H
+
+struct xt_helper_info {
+	int invert;
+	char name[30];
+};
+#endif /* _XT_HELPER_H */
diff --git a/include/linux/netfilter/xt_iprange.h b/include/linux/netfilter/xt_iprange.h
new file mode 100644
index 00000000..25fd7cf8
--- /dev/null
+++ b/include/linux/netfilter/xt_iprange.h
@@ -0,0 +1,20 @@
+#ifndef _LINUX_NETFILTER_XT_IPRANGE_H
+#define _LINUX_NETFILTER_XT_IPRANGE_H 1
+
+#include <linux/types.h>
+#include <linux/netfilter.h>
+
+enum {
+	IPRANGE_SRC     = 1 << 0,	/* match source IP address */
+	IPRANGE_DST     = 1 << 1,	/* match destination IP address */
+	IPRANGE_SRC_INV = 1 << 4,	/* negate the condition */
+	IPRANGE_DST_INV = 1 << 5,	/* -"- */
+};
+
+struct xt_iprange_mtinfo {
+	union nf_inet_addr src_min, src_max;
+	union nf_inet_addr dst_min, dst_max;
+	__u8 flags;
+};
+
+#endif /* _LINUX_NETFILTER_XT_IPRANGE_H */
diff --git a/include/linux/netfilter/xt_ipvs.h b/include/linux/netfilter/xt_ipvs.h
new file mode 100644
index 00000000..eff34ac1
--- /dev/null
+++ b/include/linux/netfilter/xt_ipvs.h
@@ -0,0 +1,29 @@
+#ifndef _XT_IPVS_H
+#define _XT_IPVS_H
+
+#include <linux/types.h>
+
+enum {
+	XT_IPVS_IPVS_PROPERTY =	1 << 0, /* all other options imply this one */
+	XT_IPVS_PROTO =		1 << 1,
+	XT_IPVS_VADDR =		1 << 2,
+	XT_IPVS_VPORT =		1 << 3,
+	XT_IPVS_DIR =		1 << 4,
+	XT_IPVS_METHOD =	1 << 5,
+	XT_IPVS_VPORTCTL =	1 << 6,
+	XT_IPVS_MASK =		(1 << 7) - 1,
+	XT_IPVS_ONCE_MASK =	XT_IPVS_MASK & ~XT_IPVS_IPVS_PROPERTY
+};
+
+struct xt_ipvs_mtinfo {
+	union nf_inet_addr	vaddr, vmask;
+	__be16			vport;
+	__u8			l4proto;
+	__u8			fwd_method;
+	__be16			vportctl;
+
+	__u8			invert;
+	__u8			bitmask;
+};
+
+#endif /* _XT_IPVS_H */
diff --git a/include/linux/netfilter/xt_length.h b/include/linux/netfilter/xt_length.h
new file mode 100644
index 00000000..b82ed7c4
--- /dev/null
+++ b/include/linux/netfilter/xt_length.h
@@ -0,0 +1,11 @@
+#ifndef _XT_LENGTH_H
+#define _XT_LENGTH_H
+
+#include <linux/types.h>
+
+struct xt_length_info {
+    __u16	min, max;
+    __u8	invert;
+};
+
+#endif /*_XT_LENGTH_H*/
diff --git a/include/linux/netfilter/xt_limit.h b/include/linux/netfilter/xt_limit.h
new file mode 100644
index 00000000..bb47fc4d
--- /dev/null
+++ b/include/linux/netfilter/xt_limit.h
@@ -0,0 +1,24 @@
+#ifndef _XT_RATE_H
+#define _XT_RATE_H
+
+#include <linux/types.h>
+
+/* timings are in milliseconds. */
+#define XT_LIMIT_SCALE 10000
+
+struct xt_limit_priv;
+
+/* 1/10,000 sec period => max of 10,000/sec.  Min rate is then 429490
+   seconds, or one every 59 hours. */
+struct xt_rateinfo {
+	__u32 avg;    /* Average secs between packets * scale */
+	__u32 burst;  /* Period multiplier for upper limit. */
+
+	/* Used internally by the kernel */
+	unsigned long prev; /* moved to xt_limit_priv */
+	__u32 credit; /* moved to xt_limit_priv */
+	__u32 credit_cap, cost;
+
+	struct xt_limit_priv *master;
+};
+#endif /*_XT_RATE_H*/
diff --git a/include/linux/netfilter/xt_mac.h b/include/linux/netfilter/xt_mac.h
new file mode 100644
index 00000000..b892cdc6
--- /dev/null
+++ b/include/linux/netfilter/xt_mac.h
@@ -0,0 +1,8 @@
+#ifndef _XT_MAC_H
+#define _XT_MAC_H
+
+struct xt_mac_info {
+    unsigned char srcaddr[ETH_ALEN];
+    int invert;
+};
+#endif /*_XT_MAC_H*/
diff --git a/include/linux/netfilter/xt_mark.h b/include/linux/netfilter/xt_mark.h
new file mode 100644
index 00000000..ecadc40d
--- /dev/null
+++ b/include/linux/netfilter/xt_mark.h
@@ -0,0 +1,15 @@
+#ifndef _XT_MARK_H
+#define _XT_MARK_H
+
+#include <linux/types.h>
+
+struct xt_mark_tginfo2 {
+	__u32 mark, mask;
+};
+
+struct xt_mark_mtinfo1 {
+	__u32 mark, mask;
+	__u8 invert;
+};
+
+#endif /*_XT_MARK_H*/
diff --git a/include/linux/netfilter/xt_multiport.h b/include/linux/netfilter/xt_multiport.h
new file mode 100644
index 00000000..5b7e72df
--- /dev/null
+++ b/include/linux/netfilter/xt_multiport.h
@@ -0,0 +1,29 @@
+#ifndef _XT_MULTIPORT_H
+#define _XT_MULTIPORT_H
+
+#include <linux/types.h>
+
+enum xt_multiport_flags {
+	XT_MULTIPORT_SOURCE,
+	XT_MULTIPORT_DESTINATION,
+	XT_MULTIPORT_EITHER
+};
+
+#define XT_MULTI_PORTS	15
+
+/* Must fit inside union xt_matchinfo: 16 bytes */
+struct xt_multiport {
+	__u8 flags;				/* Type of comparison */
+	__u8 count;				/* Number of ports */
+	__u16 ports[XT_MULTI_PORTS];	/* Ports */
+};
+
+struct xt_multiport_v1 {
+	__u8 flags;				/* Type of comparison */
+	__u8 count;				/* Number of ports */
+	__u16 ports[XT_MULTI_PORTS];	/* Ports */
+	__u8 pflags[XT_MULTI_PORTS];	/* Port flags */
+	__u8 invert;			/* Invert flag */
+};
+
+#endif /*_XT_MULTIPORT_H*/
diff --git a/include/linux/netfilter/xt_nfacct.h b/include/linux/netfilter/xt_nfacct.h
new file mode 100644
index 00000000..3e19c8a8
--- /dev/null
+++ b/include/linux/netfilter/xt_nfacct.h
@@ -0,0 +1,13 @@
+#ifndef _XT_NFACCT_MATCH_H
+#define _XT_NFACCT_MATCH_H
+
+#include <linux/netfilter/nfnetlink_acct.h>
+
+struct nf_acct;
+
+struct xt_nfacct_match_info {
+	char		name[NFACCT_NAME_MAX];
+	struct nf_acct	*nfacct;
+};
+
+#endif /* _XT_NFACCT_MATCH_H */
diff --git a/include/linux/netfilter/xt_osf.h b/include/linux/netfilter/xt_osf.h
new file mode 100644
index 00000000..18afa495
--- /dev/null
+++ b/include/linux/netfilter/xt_osf.h
@@ -0,0 +1,135 @@
+/*
+ * Copyright (c) 2003+ Evgeniy Polyakov <johnpol@2ka.mxt.ru>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _XT_OSF_H
+#define _XT_OSF_H
+
+#include <linux/types.h>
+
+#define MAXGENRELEN		32
+
+#define XT_OSF_GENRE		(1<<0)
+#define	XT_OSF_TTL		(1<<1)
+#define XT_OSF_LOG		(1<<2)
+#define XT_OSF_INVERT		(1<<3)
+
+#define XT_OSF_LOGLEVEL_ALL	0	/* log all matched fingerprints */
+#define XT_OSF_LOGLEVEL_FIRST	1	/* log only the first matced fingerprint */
+#define XT_OSF_LOGLEVEL_ALL_KNOWN	2 /* do not log unknown packets */
+
+#define XT_OSF_TTL_TRUE		0	/* True ip and fingerprint TTL comparison */
+#define XT_OSF_TTL_LESS		1	/* Check if ip TTL is less than fingerprint one */
+#define XT_OSF_TTL_NOCHECK	2	/* Do not compare ip and fingerprint TTL at all */
+
+struct xt_osf_info {
+	char			genre[MAXGENRELEN];
+	__u32			len;
+	__u32			flags;
+	__u32			loglevel;
+	__u32			ttl;
+};
+
+/*
+ * Wildcard MSS (kind of).
+ * It is used to implement a state machine for the different wildcard values
+ * of the MSS and window sizes.
+ */
+struct xt_osf_wc {
+	__u32			wc;
+	__u32			val;
+};
+
+/*
+ * This struct represents IANA options
+ * http://www.iana.org/assignments/tcp-parameters
+ */
+struct xt_osf_opt {
+	__u16			kind, length;
+	struct xt_osf_wc	wc;
+};
+
+struct xt_osf_user_finger {
+	struct xt_osf_wc	wss;
+
+	__u8			ttl, df;
+	__u16			ss, mss;
+	__u16			opt_num;
+
+	char			genre[MAXGENRELEN];
+	char			version[MAXGENRELEN];
+	char			subtype[MAXGENRELEN];
+
+	/* MAX_IPOPTLEN is maximum if all options are NOPs or EOLs */
+	struct xt_osf_opt	opt[MAX_IPOPTLEN];
+};
+
+struct xt_osf_nlmsg {
+	struct xt_osf_user_finger	f;
+	struct iphdr		ip;
+	struct tcphdr		tcp;
+};
+
+/* Defines for IANA option kinds */
+
+enum iana_options {
+	OSFOPT_EOL = 0,		/* End of options */
+	OSFOPT_NOP, 		/* NOP */
+	OSFOPT_MSS, 		/* Maximum segment size */
+	OSFOPT_WSO, 		/* Window scale option */
+	OSFOPT_SACKP,		/* SACK permitted */
+	OSFOPT_SACK,		/* SACK */
+	OSFOPT_ECHO,
+	OSFOPT_ECHOREPLY,
+	OSFOPT_TS,		/* Timestamp option */
+	OSFOPT_POCP,		/* Partial Order Connection Permitted */
+	OSFOPT_POSP,		/* Partial Order Service Profile */
+
+	/* Others are not used in the current OSF */
+	OSFOPT_EMPTY = 255,
+};
+
+/*
+ * Initial window size option state machine: multiple of mss, mtu or
+ * plain numeric value. Can also be made as plain numeric value which
+ * is not a multiple of specified value.
+ */
+enum xt_osf_window_size_options {
+	OSF_WSS_PLAIN	= 0,
+	OSF_WSS_MSS,
+	OSF_WSS_MTU,
+	OSF_WSS_MODULO,
+	OSF_WSS_MAX,
+};
+
+/*
+ * Add/remove fingerprint from the kernel.
+ */
+enum xt_osf_msg_types {
+	OSF_MSG_ADD,
+	OSF_MSG_REMOVE,
+	OSF_MSG_MAX,
+};
+
+enum xt_osf_attr_type {
+	OSF_ATTR_UNSPEC,
+	OSF_ATTR_FINGER,
+	OSF_ATTR_MAX,
+};
+
+#endif				/* _XT_OSF_H */
diff --git a/include/linux/netfilter/xt_owner.h b/include/linux/netfilter/xt_owner.h
new file mode 100644
index 00000000..20817617
--- /dev/null
+++ b/include/linux/netfilter/xt_owner.h
@@ -0,0 +1,18 @@
+#ifndef _XT_OWNER_MATCH_H
+#define _XT_OWNER_MATCH_H
+
+#include <linux/types.h>
+
+enum {
+	XT_OWNER_UID    = 1 << 0,
+	XT_OWNER_GID    = 1 << 1,
+	XT_OWNER_SOCKET = 1 << 2,
+};
+
+struct xt_owner_match_info {
+	__u32 uid_min, uid_max;
+	__u32 gid_min, gid_max;
+	__u8 match, invert;
+};
+
+#endif /* _XT_OWNER_MATCH_H */
diff --git a/include/linux/netfilter/xt_physdev.h b/include/linux/netfilter/xt_physdev.h
new file mode 100644
index 00000000..8555e399
--- /dev/null
+++ b/include/linux/netfilter/xt_physdev.h
@@ -0,0 +1,26 @@
+#ifndef _XT_PHYSDEV_H
+#define _XT_PHYSDEV_H
+
+#include <linux/types.h>
+
+#ifdef __KERNEL__
+#include <linux/if.h>
+#endif
+
+#define XT_PHYSDEV_OP_IN		0x01
+#define XT_PHYSDEV_OP_OUT		0x02
+#define XT_PHYSDEV_OP_BRIDGED		0x04
+#define XT_PHYSDEV_OP_ISIN		0x08
+#define XT_PHYSDEV_OP_ISOUT		0x10
+#define XT_PHYSDEV_OP_MASK		(0x20 - 1)
+
+struct xt_physdev_info {
+	char physindev[IFNAMSIZ];
+	char in_mask[IFNAMSIZ];
+	char physoutdev[IFNAMSIZ];
+	char out_mask[IFNAMSIZ];
+	__u8 invert;
+	__u8 bitmask;
+};
+
+#endif /*_XT_PHYSDEV_H*/
diff --git a/include/linux/netfilter/xt_pkttype.h b/include/linux/netfilter/xt_pkttype.h
new file mode 100644
index 00000000..f265cf52
--- /dev/null
+++ b/include/linux/netfilter/xt_pkttype.h
@@ -0,0 +1,8 @@
+#ifndef _XT_PKTTYPE_H
+#define _XT_PKTTYPE_H
+
+struct xt_pkttype_info {
+	int	pkttype;
+	int	invert;
+};
+#endif /*_XT_PKTTYPE_H*/
diff --git a/include/linux/netfilter/xt_policy.h b/include/linux/netfilter/xt_policy.h
new file mode 100644
index 00000000..be8ead05
--- /dev/null
+++ b/include/linux/netfilter/xt_policy.h
@@ -0,0 +1,69 @@
+#ifndef _XT_POLICY_H
+#define _XT_POLICY_H
+
+#include <linux/types.h>
+
+#define XT_POLICY_MAX_ELEM	4
+
+enum xt_policy_flags {
+	XT_POLICY_MATCH_IN	= 0x1,
+	XT_POLICY_MATCH_OUT	= 0x2,
+	XT_POLICY_MATCH_NONE	= 0x4,
+	XT_POLICY_MATCH_STRICT	= 0x8,
+};
+
+enum xt_policy_modes {
+	XT_POLICY_MODE_TRANSPORT,
+	XT_POLICY_MODE_TUNNEL
+};
+
+struct xt_policy_spec {
+	__u8	saddr:1,
+			daddr:1,
+			proto:1,
+			mode:1,
+			spi:1,
+			reqid:1;
+};
+
+#ifndef __KERNEL__
+union xt_policy_addr {
+	struct in_addr	a4;
+	struct in6_addr	a6;
+};
+#endif
+
+struct xt_policy_elem {
+	union {
+#ifdef __KERNEL__
+		struct {
+			union nf_inet_addr saddr;
+			union nf_inet_addr smask;
+			union nf_inet_addr daddr;
+			union nf_inet_addr dmask;
+		};
+#else
+		struct {
+			union xt_policy_addr saddr;
+			union xt_policy_addr smask;
+			union xt_policy_addr daddr;
+			union xt_policy_addr dmask;
+		};
+#endif
+	};
+	__be32			spi;
+	__u32		reqid;
+	__u8		proto;
+	__u8		mode;
+
+	struct xt_policy_spec	match;
+	struct xt_policy_spec	invert;
+};
+
+struct xt_policy_info {
+	struct xt_policy_elem pol[XT_POLICY_MAX_ELEM];
+	__u16 flags;
+	__u16 len;
+};
+
+#endif /* _XT_POLICY_H */
diff --git a/include/linux/netfilter/xt_qtaguid.h b/include/linux/netfilter/xt_qtaguid.h
new file mode 100644
index 00000000..ca60fbde
--- /dev/null
+++ b/include/linux/netfilter/xt_qtaguid.h
@@ -0,0 +1,13 @@
+#ifndef _XT_QTAGUID_MATCH_H
+#define _XT_QTAGUID_MATCH_H
+
+/* For now we just replace the xt_owner.
+ * FIXME: make iptables aware of qtaguid. */
+#include <linux/netfilter/xt_owner.h>
+
+#define XT_QTAGUID_UID    XT_OWNER_UID
+#define XT_QTAGUID_GID    XT_OWNER_GID
+#define XT_QTAGUID_SOCKET XT_OWNER_SOCKET
+#define xt_qtaguid_match_info xt_owner_match_info
+
+#endif /* _XT_QTAGUID_MATCH_H */
diff --git a/include/linux/netfilter/xt_quota.h b/include/linux/netfilter/xt_quota.h
new file mode 100644
index 00000000..9314723f
--- /dev/null
+++ b/include/linux/netfilter/xt_quota.h
@@ -0,0 +1,22 @@
+#ifndef _XT_QUOTA_H
+#define _XT_QUOTA_H
+
+#include <linux/types.h>
+
+enum xt_quota_flags {
+	XT_QUOTA_INVERT		= 0x1,
+};
+#define XT_QUOTA_MASK		0x1
+
+struct xt_quota_priv;
+
+struct xt_quota_info {
+	__u32 flags;
+	__u32 pad;
+	__aligned_u64 quota;
+
+	/* Used internally by the kernel */
+	struct xt_quota_priv	*master;
+};
+
+#endif /* _XT_QUOTA_H */
diff --git a/include/linux/netfilter/xt_quota2.h b/include/linux/netfilter/xt_quota2.h
new file mode 100644
index 00000000..eadc6903
--- /dev/null
+++ b/include/linux/netfilter/xt_quota2.h
@@ -0,0 +1,25 @@
+#ifndef _XT_QUOTA_H
+#define _XT_QUOTA_H
+
+enum xt_quota_flags {
+	XT_QUOTA_INVERT    = 1 << 0,
+	XT_QUOTA_GROW      = 1 << 1,
+	XT_QUOTA_PACKET    = 1 << 2,
+	XT_QUOTA_NO_CHANGE = 1 << 3,
+	XT_QUOTA_MASK      = 0x0F,
+};
+
+struct xt_quota_counter;
+
+struct xt_quota_mtinfo2 {
+	char name[15];
+	u_int8_t flags;
+
+	/* Comparison-invariant */
+	aligned_u64 quota;
+
+	/* Used internally by the kernel */
+	struct xt_quota_counter *master __attribute__((aligned(8)));
+};
+
+#endif /* _XT_QUOTA_H */
diff --git a/include/linux/netfilter/xt_rateest.h b/include/linux/netfilter/xt_rateest.h
new file mode 100644
index 00000000..d40a6196
--- /dev/null
+++ b/include/linux/netfilter/xt_rateest.h
@@ -0,0 +1,37 @@
+#ifndef _XT_RATEEST_MATCH_H
+#define _XT_RATEEST_MATCH_H
+
+#include <linux/types.h>
+
+enum xt_rateest_match_flags {
+	XT_RATEEST_MATCH_INVERT	= 1<<0,
+	XT_RATEEST_MATCH_ABS	= 1<<1,
+	XT_RATEEST_MATCH_REL	= 1<<2,
+	XT_RATEEST_MATCH_DELTA	= 1<<3,
+	XT_RATEEST_MATCH_BPS	= 1<<4,
+	XT_RATEEST_MATCH_PPS	= 1<<5,
+};
+
+enum xt_rateest_match_mode {
+	XT_RATEEST_MATCH_NONE,
+	XT_RATEEST_MATCH_EQ,
+	XT_RATEEST_MATCH_LT,
+	XT_RATEEST_MATCH_GT,
+};
+
+struct xt_rateest_match_info {
+	char			name1[IFNAMSIZ];
+	char			name2[IFNAMSIZ];
+	__u16		flags;
+	__u16		mode;
+	__u32		bps1;
+	__u32		pps1;
+	__u32		bps2;
+	__u32		pps2;
+
+	/* Used internally by the kernel */
+	struct xt_rateest	*est1 __attribute__((aligned(8)));
+	struct xt_rateest	*est2 __attribute__((aligned(8)));
+};
+
+#endif /* _XT_RATEEST_MATCH_H */
diff --git a/include/linux/netfilter/xt_realm.h b/include/linux/netfilter/xt_realm.h
new file mode 100644
index 00000000..d4a82ee5
--- /dev/null
+++ b/include/linux/netfilter/xt_realm.h
@@ -0,0 +1,12 @@
+#ifndef _XT_REALM_H
+#define _XT_REALM_H
+
+#include <linux/types.h>
+
+struct xt_realm_info {
+	__u32 id;
+	__u32 mask;
+	__u8 invert;
+};
+
+#endif /* _XT_REALM_H */
diff --git a/include/linux/netfilter/xt_recent.h b/include/linux/netfilter/xt_recent.h
new file mode 100644
index 00000000..83318e01
--- /dev/null
+++ b/include/linux/netfilter/xt_recent.h
@@ -0,0 +1,35 @@
+#ifndef _LINUX_NETFILTER_XT_RECENT_H
+#define _LINUX_NETFILTER_XT_RECENT_H 1
+
+#include <linux/types.h>
+
+enum {
+	XT_RECENT_CHECK    = 1 << 0,
+	XT_RECENT_SET      = 1 << 1,
+	XT_RECENT_UPDATE   = 1 << 2,
+	XT_RECENT_REMOVE   = 1 << 3,
+	XT_RECENT_TTL      = 1 << 4,
+	XT_RECENT_REAP     = 1 << 5,
+
+	XT_RECENT_SOURCE   = 0,
+	XT_RECENT_DEST     = 1,
+
+	XT_RECENT_NAME_LEN = 200,
+};
+
+/* Only allowed with --rcheck and --update */
+#define XT_RECENT_MODIFIERS (XT_RECENT_TTL|XT_RECENT_REAP)
+
+#define XT_RECENT_VALID_FLAGS (XT_RECENT_CHECK|XT_RECENT_SET|XT_RECENT_UPDATE|\
+			       XT_RECENT_REMOVE|XT_RECENT_TTL|XT_RECENT_REAP)
+
+struct xt_recent_mtinfo {
+	__u32 seconds;
+	__u32 hit_count;
+	__u8 check_set;
+	__u8 invert;
+	char name[XT_RECENT_NAME_LEN];
+	__u8 side;
+};
+
+#endif /* _LINUX_NETFILTER_XT_RECENT_H */
diff --git a/include/linux/netfilter/xt_rpfilter.h b/include/linux/netfilter/xt_rpfilter.h
new file mode 100644
index 00000000..8358d4f7
--- /dev/null
+++ b/include/linux/netfilter/xt_rpfilter.h
@@ -0,0 +1,23 @@
+#ifndef _XT_RPATH_H
+#define _XT_RPATH_H
+
+#include <linux/types.h>
+
+enum {
+	XT_RPFILTER_LOOSE = 1 << 0,
+	XT_RPFILTER_VALID_MARK = 1 << 1,
+	XT_RPFILTER_ACCEPT_LOCAL = 1 << 2,
+	XT_RPFILTER_INVERT = 1 << 3,
+#ifdef __KERNEL__
+	XT_RPFILTER_OPTION_MASK = XT_RPFILTER_LOOSE |
+				  XT_RPFILTER_VALID_MARK |
+				  XT_RPFILTER_ACCEPT_LOCAL |
+				  XT_RPFILTER_INVERT,
+#endif
+};
+
+struct xt_rpfilter_info {
+	__u8 flags;
+};
+
+#endif
diff --git a/include/linux/netfilter/xt_sctp.h b/include/linux/netfilter/xt_sctp.h
new file mode 100644
index 00000000..29287be6
--- /dev/null
+++ b/include/linux/netfilter/xt_sctp.h
@@ -0,0 +1,92 @@
+#ifndef _XT_SCTP_H_
+#define _XT_SCTP_H_
+
+#include <linux/types.h>
+
+#define XT_SCTP_SRC_PORTS	        0x01
+#define XT_SCTP_DEST_PORTS	        0x02
+#define XT_SCTP_CHUNK_TYPES		0x04
+
+#define XT_SCTP_VALID_FLAGS		0x07
+
+struct xt_sctp_flag_info {
+	__u8 chunktype;
+	__u8 flag;
+	__u8 flag_mask;
+};
+
+#define XT_NUM_SCTP_FLAGS	4
+
+struct xt_sctp_info {
+	__u16 dpts[2];  /* Min, Max */
+	__u16 spts[2];  /* Min, Max */
+
+	__u32 chunkmap[256 / sizeof (__u32)];  /* Bit mask of chunks to be matched according to RFC 2960 */
+
+#define SCTP_CHUNK_MATCH_ANY   0x01  /* Match if any of the chunk types are present */
+#define SCTP_CHUNK_MATCH_ALL   0x02  /* Match if all of the chunk types are present */
+#define SCTP_CHUNK_MATCH_ONLY  0x04  /* Match if these are the only chunk types present */
+
+	__u32 chunk_match_type;
+	struct xt_sctp_flag_info flag_info[XT_NUM_SCTP_FLAGS];
+	int flag_count;
+
+	__u32 flags;
+	__u32 invflags;
+};
+
+#define bytes(type) (sizeof(type) * 8)
+
+#define SCTP_CHUNKMAP_SET(chunkmap, type) 		\
+	do { 						\
+		(chunkmap)[type / bytes(__u32)] |= 	\
+			1 << (type % bytes(__u32));	\
+	} while (0)
+
+#define SCTP_CHUNKMAP_CLEAR(chunkmap, type)		 	\
+	do {							\
+		(chunkmap)[type / bytes(__u32)] &= 		\
+			~(1 << (type % bytes(__u32)));	\
+	} while (0)
+
+#define SCTP_CHUNKMAP_IS_SET(chunkmap, type) 			\
+({								\
+	((chunkmap)[type / bytes (__u32)] & 		\
+		(1 << (type % bytes (__u32)))) ? 1: 0;	\
+})
+
+#define SCTP_CHUNKMAP_RESET(chunkmap) \
+	memset((chunkmap), 0, sizeof(chunkmap))
+
+#define SCTP_CHUNKMAP_SET_ALL(chunkmap) \
+	memset((chunkmap), ~0U, sizeof(chunkmap))
+
+#define SCTP_CHUNKMAP_COPY(destmap, srcmap) \
+	memcpy((destmap), (srcmap), sizeof(srcmap))
+
+#define SCTP_CHUNKMAP_IS_CLEAR(chunkmap) \
+	__sctp_chunkmap_is_clear((chunkmap), ARRAY_SIZE(chunkmap))
+static inline bool
+__sctp_chunkmap_is_clear(const __u32 *chunkmap, unsigned int n)
+{
+	unsigned int i;
+	for (i = 0; i < n; ++i)
+		if (chunkmap[i])
+			return false;
+	return true;
+}
+
+#define SCTP_CHUNKMAP_IS_ALL_SET(chunkmap) \
+	__sctp_chunkmap_is_all_set((chunkmap), ARRAY_SIZE(chunkmap))
+static inline bool
+__sctp_chunkmap_is_all_set(const __u32 *chunkmap, unsigned int n)
+{
+	unsigned int i;
+	for (i = 0; i < n; ++i)
+		if (chunkmap[i] != ~0U)
+			return false;
+	return true;
+}
+
+#endif /* _XT_SCTP_H_ */
+
diff --git a/include/linux/netfilter/xt_set.h b/include/linux/netfilter/xt_set.h
new file mode 100644
index 00000000..e3a9978f
--- /dev/null
+++ b/include/linux/netfilter/xt_set.h
@@ -0,0 +1,65 @@
+#ifndef _XT_SET_H
+#define _XT_SET_H
+
+#include <linux/types.h>
+#include <linux/netfilter/ipset/ip_set.h>
+
+/* Revision 0 interface: backward compatible with netfilter/iptables */
+
+/*
+ * Option flags for kernel operations (xt_set_info_v0)
+ */
+#define IPSET_SRC		0x01	/* Source match/add */
+#define IPSET_DST		0x02	/* Destination match/add */
+#define IPSET_MATCH_INV		0x04	/* Inverse matching */
+
+struct xt_set_info_v0 {
+	ip_set_id_t index;
+	union {
+		__u32 flags[IPSET_DIM_MAX + 1];
+		struct {
+			__u32 __flags[IPSET_DIM_MAX];
+			__u8 dim;
+			__u8 flags;
+		} compat;
+	} u;
+};
+
+/* match and target infos */
+struct xt_set_info_match_v0 {
+	struct xt_set_info_v0 match_set;
+};
+
+struct xt_set_info_target_v0 {
+	struct xt_set_info_v0 add_set;
+	struct xt_set_info_v0 del_set;
+};
+
+/* Revision 1  match and target */
+
+struct xt_set_info {
+	ip_set_id_t index;
+	__u8 dim;
+	__u8 flags;
+};
+
+/* match and target infos */
+struct xt_set_info_match_v1 {
+	struct xt_set_info match_set;
+};
+
+struct xt_set_info_target_v1 {
+	struct xt_set_info add_set;
+	struct xt_set_info del_set;
+};
+
+/* Revision 2 target */
+
+struct xt_set_info_target_v2 {
+	struct xt_set_info add_set;
+	struct xt_set_info del_set;
+	__u32 flags;
+	__u32 timeout;
+};
+
+#endif /*_XT_SET_H*/
diff --git a/include/linux/netfilter/xt_socket.h b/include/linux/netfilter/xt_socket.h
new file mode 100644
index 00000000..63594564
--- /dev/null
+++ b/include/linux/netfilter/xt_socket.h
@@ -0,0 +1,20 @@
+#ifndef _XT_SOCKET_H
+#define _XT_SOCKET_H
+
+#include <linux/types.h>
+
+enum {
+	XT_SOCKET_TRANSPARENT = 1 << 0,
+};
+
+struct xt_socket_mtinfo1 {
+	__u8 flags;
+};
+
+void xt_socket_put_sk(struct sock *sk);
+struct sock *xt_socket_get4_sk(const struct sk_buff *skb,
+			       struct xt_action_param *par);
+struct sock *xt_socket_get6_sk(const struct sk_buff *skb,
+			       struct xt_action_param *par);
+
+#endif /* _XT_SOCKET_H */
diff --git a/include/linux/netfilter/xt_state.h b/include/linux/netfilter/xt_state.h
new file mode 100644
index 00000000..7b32de88
--- /dev/null
+++ b/include/linux/netfilter/xt_state.h
@@ -0,0 +1,12 @@
+#ifndef _XT_STATE_H
+#define _XT_STATE_H
+
+#define XT_STATE_BIT(ctinfo) (1 << ((ctinfo)%IP_CT_IS_REPLY+1))
+#define XT_STATE_INVALID (1 << 0)
+
+#define XT_STATE_UNTRACKED (1 << (IP_CT_NUMBER + 1))
+
+struct xt_state_info {
+	unsigned int statemask;
+};
+#endif /*_XT_STATE_H*/
diff --git a/include/linux/netfilter/xt_statistic.h b/include/linux/netfilter/xt_statistic.h
new file mode 100644
index 00000000..4e983ef0
--- /dev/null
+++ b/include/linux/netfilter/xt_statistic.h
@@ -0,0 +1,36 @@
+#ifndef _XT_STATISTIC_H
+#define _XT_STATISTIC_H
+
+#include <linux/types.h>
+
+enum xt_statistic_mode {
+	XT_STATISTIC_MODE_RANDOM,
+	XT_STATISTIC_MODE_NTH,
+	__XT_STATISTIC_MODE_MAX
+};
+#define XT_STATISTIC_MODE_MAX (__XT_STATISTIC_MODE_MAX - 1)
+
+enum xt_statistic_flags {
+	XT_STATISTIC_INVERT		= 0x1,
+};
+#define XT_STATISTIC_MASK		0x1
+
+struct xt_statistic_priv;
+
+struct xt_statistic_info {
+	__u16			mode;
+	__u16			flags;
+	union {
+		struct {
+			__u32	probability;
+		} random;
+		struct {
+			__u32	every;
+			__u32	packet;
+			__u32	count; /* unused */
+		} nth;
+	} u;
+	struct xt_statistic_priv *master __attribute__((aligned(8)));
+};
+
+#endif /* _XT_STATISTIC_H */
diff --git a/include/linux/netfilter/xt_string.h b/include/linux/netfilter/xt_string.h
new file mode 100644
index 00000000..235347c0
--- /dev/null
+++ b/include/linux/netfilter/xt_string.h
@@ -0,0 +1,34 @@
+#ifndef _XT_STRING_H
+#define _XT_STRING_H
+
+#include <linux/types.h>
+
+#define XT_STRING_MAX_PATTERN_SIZE 128
+#define XT_STRING_MAX_ALGO_NAME_SIZE 16
+
+enum {
+	XT_STRING_FLAG_INVERT		= 0x01,
+	XT_STRING_FLAG_IGNORECASE	= 0x02
+};
+
+struct xt_string_info {
+	__u16 from_offset;
+	__u16 to_offset;
+	char	  algo[XT_STRING_MAX_ALGO_NAME_SIZE];
+	char 	  pattern[XT_STRING_MAX_PATTERN_SIZE];
+	__u8  patlen;
+	union {
+		struct {
+			__u8  invert;
+		} v0;
+
+		struct {
+			__u8  flags;
+		} v1;
+	} u;
+
+	/* Used internally by the kernel */
+	struct ts_config __attribute__((aligned(8))) *config;
+};
+
+#endif /*_XT_STRING_H*/
diff --git a/include/linux/netfilter/xt_tcpmss.h b/include/linux/netfilter/xt_tcpmss.h
new file mode 100644
index 00000000..fbac56b9
--- /dev/null
+++ b/include/linux/netfilter/xt_tcpmss.h
@@ -0,0 +1,11 @@
+#ifndef _XT_TCPMSS_MATCH_H
+#define _XT_TCPMSS_MATCH_H
+
+#include <linux/types.h>
+
+struct xt_tcpmss_match_info {
+    __u16 mss_min, mss_max;
+    __u8 invert;
+};
+
+#endif /*_XT_TCPMSS_MATCH_H*/
diff --git a/include/linux/netfilter/xt_tcpudp.h b/include/linux/netfilter/xt_tcpudp.h
new file mode 100644
index 00000000..38aa7b39
--- /dev/null
+++ b/include/linux/netfilter/xt_tcpudp.h
@@ -0,0 +1,36 @@
+#ifndef _XT_TCPUDP_H
+#define _XT_TCPUDP_H
+
+#include <linux/types.h>
+
+/* TCP matching stuff */
+struct xt_tcp {
+	__u16 spts[2];			/* Source port range. */
+	__u16 dpts[2];			/* Destination port range. */
+	__u8 option;			/* TCP Option iff non-zero*/
+	__u8 flg_mask;			/* TCP flags mask byte */
+	__u8 flg_cmp;			/* TCP flags compare byte */
+	__u8 invflags;			/* Inverse flags */
+};
+
+/* Values for "inv" field in struct ipt_tcp. */
+#define XT_TCP_INV_SRCPT	0x01	/* Invert the sense of source ports. */
+#define XT_TCP_INV_DSTPT	0x02	/* Invert the sense of dest ports. */
+#define XT_TCP_INV_FLAGS	0x04	/* Invert the sense of TCP flags. */
+#define XT_TCP_INV_OPTION	0x08	/* Invert the sense of option test. */
+#define XT_TCP_INV_MASK		0x0F	/* All possible flags. */
+
+/* UDP matching stuff */
+struct xt_udp {
+	__u16 spts[2];			/* Source port range. */
+	__u16 dpts[2];			/* Destination port range. */
+	__u8 invflags;			/* Inverse flags */
+};
+
+/* Values for "invflags" field in struct ipt_udp. */
+#define XT_UDP_INV_SRCPT	0x01	/* Invert the sense of source ports. */
+#define XT_UDP_INV_DSTPT	0x02	/* Invert the sense of dest ports. */
+#define XT_UDP_INV_MASK	0x03	/* All possible flags. */
+
+
+#endif
diff --git a/include/linux/netfilter/xt_time.h b/include/linux/netfilter/xt_time.h
new file mode 100644
index 00000000..7c37fac5
--- /dev/null
+++ b/include/linux/netfilter/xt_time.h
@@ -0,0 +1,27 @@
+#ifndef _XT_TIME_H
+#define _XT_TIME_H 1
+
+#include <linux/types.h>
+
+struct xt_time_info {
+	__u32 date_start;
+	__u32 date_stop;
+	__u32 daytime_start;
+	__u32 daytime_stop;
+	__u32 monthdays_match;
+	__u8 weekdays_match;
+	__u8 flags;
+};
+
+enum {
+	/* Match against local time (instead of UTC) */
+	XT_TIME_LOCAL_TZ = 1 << 0,
+
+	/* Shortcuts */
+	XT_TIME_ALL_MONTHDAYS = 0xFFFFFFFE,
+	XT_TIME_ALL_WEEKDAYS  = 0xFE,
+	XT_TIME_MIN_DAYTIME   = 0,
+	XT_TIME_MAX_DAYTIME   = 24 * 60 * 60 - 1,
+};
+
+#endif /* _XT_TIME_H */
diff --git a/include/linux/netfilter/xt_u32.h b/include/linux/netfilter/xt_u32.h
new file mode 100644
index 00000000..04d1bfea
--- /dev/null
+++ b/include/linux/netfilter/xt_u32.h
@@ -0,0 +1,42 @@
+#ifndef _XT_U32_H
+#define _XT_U32_H 1
+
+#include <linux/types.h>
+
+enum xt_u32_ops {
+	XT_U32_AND,
+	XT_U32_LEFTSH,
+	XT_U32_RIGHTSH,
+	XT_U32_AT,
+};
+
+struct xt_u32_location_element {
+	__u32 number;
+	__u8 nextop;
+};
+
+struct xt_u32_value_element {
+	__u32 min;
+	__u32 max;
+};
+
+/*
+ * Any way to allow for an arbitrary number of elements?
+ * For now, I settle with a limit of 10 each.
+ */
+#define XT_U32_MAXSIZE 10
+
+struct xt_u32_test {
+	struct xt_u32_location_element location[XT_U32_MAXSIZE+1];
+	struct xt_u32_value_element value[XT_U32_MAXSIZE+1];
+	__u8 nnums;
+	__u8 nvalues;
+};
+
+struct xt_u32 {
+	struct xt_u32_test tests[XT_U32_MAXSIZE+1];
+	__u8 ntests;
+	__u8 invert;
+};
+
+#endif /* _XT_U32_H */
diff --git a/include/linux/netfilter_arp.h b/include/linux/netfilter_arp.h
new file mode 100644
index 00000000..92bc6ddc
--- /dev/null
+++ b/include/linux/netfilter_arp.h
@@ -0,0 +1,19 @@
+#ifndef __LINUX_ARP_NETFILTER_H
+#define __LINUX_ARP_NETFILTER_H
+
+/* ARP-specific defines for netfilter.
+ * (C)2002 Rusty Russell IBM -- This code is GPL.
+ */
+
+#include <linux/netfilter.h>
+
+/* There is no PF_ARP. */
+#define NF_ARP		0
+
+/* ARP Hooks */
+#define NF_ARP_IN	0
+#define NF_ARP_OUT	1
+#define NF_ARP_FORWARD	2
+#define NF_ARP_NUMHOOKS	3
+
+#endif /* __LINUX_ARP_NETFILTER_H */
diff --git a/include/linux/netfilter_arp/Kbuild b/include/linux/netfilter_arp/Kbuild
new file mode 100644
index 00000000..b27439c7
--- /dev/null
+++ b/include/linux/netfilter_arp/Kbuild
@@ -0,0 +1,2 @@
+header-y += arp_tables.h
+header-y += arpt_mangle.h
diff --git a/include/linux/netfilter_arp/arp_tables.h b/include/linux/netfilter_arp/arp_tables.h
new file mode 100644
index 00000000..e08565d4
--- /dev/null
+++ b/include/linux/netfilter_arp/arp_tables.h
@@ -0,0 +1,278 @@
+/*
+ * 	Format of an ARP firewall descriptor
+ *
+ * 	src, tgt, src_mask, tgt_mask, arpop, arpop_mask are always stored in
+ *	network byte order.
+ * 	flags are stored in host byte order (of course).
+ */
+
+#ifndef _ARPTABLES_H
+#define _ARPTABLES_H
+
+#ifdef __KERNEL__
+#include <linux/if.h>
+#include <linux/in.h>
+#include <linux/if_arp.h>
+#include <linux/skbuff.h>
+#endif
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/netfilter_arp.h>
+
+#include <linux/netfilter/x_tables.h>
+
+#ifndef __KERNEL__
+#define ARPT_FUNCTION_MAXNAMELEN XT_FUNCTION_MAXNAMELEN
+#define ARPT_TABLE_MAXNAMELEN XT_TABLE_MAXNAMELEN
+#define arpt_entry_target xt_entry_target
+#define arpt_standard_target xt_standard_target
+#define arpt_error_target xt_error_target
+#define ARPT_CONTINUE XT_CONTINUE
+#define ARPT_RETURN XT_RETURN
+#define arpt_counters_info xt_counters_info
+#define arpt_counters xt_counters
+#define ARPT_STANDARD_TARGET XT_STANDARD_TARGET
+#define ARPT_ERROR_TARGET XT_ERROR_TARGET
+#define ARPT_ENTRY_ITERATE(entries, size, fn, args...) \
+	XT_ENTRY_ITERATE(struct arpt_entry, entries, size, fn, ## args)
+#endif
+
+#define ARPT_DEV_ADDR_LEN_MAX 16
+
+struct arpt_devaddr_info {
+	char addr[ARPT_DEV_ADDR_LEN_MAX];
+	char mask[ARPT_DEV_ADDR_LEN_MAX];
+};
+
+/* Yes, Virginia, you have to zero the padding. */
+struct arpt_arp {
+	/* Source and target IP addr */
+	struct in_addr src, tgt;
+	/* Mask for src and target IP addr */
+	struct in_addr smsk, tmsk;
+
+	/* Device hw address length, src+target device addresses */
+	__u8 arhln, arhln_mask;
+	struct arpt_devaddr_info src_devaddr;
+	struct arpt_devaddr_info tgt_devaddr;
+
+	/* ARP operation code. */
+	__be16 arpop, arpop_mask;
+
+	/* ARP hardware address and protocol address format. */
+	__be16 arhrd, arhrd_mask;
+	__be16 arpro, arpro_mask;
+
+	/* The protocol address length is only accepted if it is 4
+	 * so there is no use in offering a way to do filtering on it.
+	 */
+
+	char iniface[IFNAMSIZ], outiface[IFNAMSIZ];
+	unsigned char iniface_mask[IFNAMSIZ], outiface_mask[IFNAMSIZ];
+
+	/* Flags word */
+	__u8 flags;
+	/* Inverse flags */
+	__u16 invflags;
+};
+
+/* Values for "flag" field in struct arpt_ip (general arp structure).
+ * No flags defined yet.
+ */
+#define ARPT_F_MASK		0x00	/* All possible flag bits mask. */
+
+/* Values for "inv" field in struct arpt_arp. */
+#define ARPT_INV_VIA_IN		0x0001	/* Invert the sense of IN IFACE. */
+#define ARPT_INV_VIA_OUT	0x0002	/* Invert the sense of OUT IFACE */
+#define ARPT_INV_SRCIP		0x0004	/* Invert the sense of SRC IP. */
+#define ARPT_INV_TGTIP		0x0008	/* Invert the sense of TGT IP. */
+#define ARPT_INV_SRCDEVADDR	0x0010	/* Invert the sense of SRC DEV ADDR. */
+#define ARPT_INV_TGTDEVADDR	0x0020	/* Invert the sense of TGT DEV ADDR. */
+#define ARPT_INV_ARPOP		0x0040	/* Invert the sense of ARP OP. */
+#define ARPT_INV_ARPHRD		0x0080	/* Invert the sense of ARP HRD. */
+#define ARPT_INV_ARPPRO		0x0100	/* Invert the sense of ARP PRO. */
+#define ARPT_INV_ARPHLN		0x0200	/* Invert the sense of ARP HLN. */
+#define ARPT_INV_MASK		0x03FF	/* All possible flag bits mask. */
+
+/* This structure defines each of the firewall rules.  Consists of 3
+   parts which are 1) general ARP header stuff 2) match specific
+   stuff 3) the target to perform if the rule matches */
+struct arpt_entry
+{
+	struct arpt_arp arp;
+
+	/* Size of arpt_entry + matches */
+	__u16 target_offset;
+	/* Size of arpt_entry + matches + target */
+	__u16 next_offset;
+
+	/* Back pointer */
+	unsigned int comefrom;
+
+	/* Packet and byte counters. */
+	struct xt_counters counters;
+
+	/* The matches (if any), then the target. */
+	unsigned char elems[0];
+};
+
+/*
+ * New IP firewall options for [gs]etsockopt at the RAW IP level.
+ * Unlike BSD Linux inherits IP options so you don't have to use a raw
+ * socket for this. Instead we check rights in the calls.
+ *
+ * ATTENTION: check linux/in.h before adding new number here.
+ */
+#define ARPT_BASE_CTL		96
+
+#define ARPT_SO_SET_REPLACE		(ARPT_BASE_CTL)
+#define ARPT_SO_SET_ADD_COUNTERS	(ARPT_BASE_CTL + 1)
+#define ARPT_SO_SET_MAX			ARPT_SO_SET_ADD_COUNTERS
+
+#define ARPT_SO_GET_INFO		(ARPT_BASE_CTL)
+#define ARPT_SO_GET_ENTRIES		(ARPT_BASE_CTL + 1)
+/* #define ARPT_SO_GET_REVISION_MATCH	(APRT_BASE_CTL + 2) */
+#define ARPT_SO_GET_REVISION_TARGET	(ARPT_BASE_CTL + 3)
+#define ARPT_SO_GET_MAX			(ARPT_SO_GET_REVISION_TARGET)
+
+/* The argument to ARPT_SO_GET_INFO */
+struct arpt_getinfo {
+	/* Which table: caller fills this in. */
+	char name[XT_TABLE_MAXNAMELEN];
+
+	/* Kernel fills these in. */
+	/* Which hook entry points are valid: bitmask */
+	unsigned int valid_hooks;
+
+	/* Hook entry points: one per netfilter hook. */
+	unsigned int hook_entry[NF_ARP_NUMHOOKS];
+
+	/* Underflow points. */
+	unsigned int underflow[NF_ARP_NUMHOOKS];
+
+	/* Number of entries */
+	unsigned int num_entries;
+
+	/* Size of entries. */
+	unsigned int size;
+};
+
+/* The argument to ARPT_SO_SET_REPLACE. */
+struct arpt_replace {
+	/* Which table. */
+	char name[XT_TABLE_MAXNAMELEN];
+
+	/* Which hook entry points are valid: bitmask.  You can't
+           change this. */
+	unsigned int valid_hooks;
+
+	/* Number of entries */
+	unsigned int num_entries;
+
+	/* Total size of new entries */
+	unsigned int size;
+
+	/* Hook entry points. */
+	unsigned int hook_entry[NF_ARP_NUMHOOKS];
+
+	/* Underflow points. */
+	unsigned int underflow[NF_ARP_NUMHOOKS];
+
+	/* Information about old entries: */
+	/* Number of counters (must be equal to current number of entries). */
+	unsigned int num_counters;
+	/* The old entries' counters. */
+	struct xt_counters __user *counters;
+
+	/* The entries (hang off end: not really an array). */
+	struct arpt_entry entries[0];
+};
+
+/* The argument to ARPT_SO_GET_ENTRIES. */
+struct arpt_get_entries {
+	/* Which table: user fills this in. */
+	char name[XT_TABLE_MAXNAMELEN];
+
+	/* User fills this in: total entry size. */
+	unsigned int size;
+
+	/* The entries. */
+	struct arpt_entry entrytable[0];
+};
+
+/* Helper functions */
+static __inline__ struct xt_entry_target *arpt_get_target(struct arpt_entry *e)
+{
+	return (void *)e + e->target_offset;
+}
+
+/*
+ *	Main firewall chains definitions and global var's definitions.
+ */
+#ifdef __KERNEL__
+
+/* Standard entry. */
+struct arpt_standard {
+	struct arpt_entry entry;
+	struct xt_standard_target target;
+};
+
+struct arpt_error {
+	struct arpt_entry entry;
+	struct xt_error_target target;
+};
+
+#define ARPT_ENTRY_INIT(__size)						       \
+{									       \
+	.target_offset	= sizeof(struct arpt_entry),			       \
+	.next_offset	= (__size),					       \
+}
+
+#define ARPT_STANDARD_INIT(__verdict)					       \
+{									       \
+	.entry		= ARPT_ENTRY_INIT(sizeof(struct arpt_standard)),       \
+	.target		= XT_TARGET_INIT(XT_STANDARD_TARGET,		       \
+					 sizeof(struct xt_standard_target)), \
+	.target.verdict	= -(__verdict) - 1,				       \
+}
+
+#define ARPT_ERROR_INIT							       \
+{									       \
+	.entry		= ARPT_ENTRY_INIT(sizeof(struct arpt_error)),	       \
+	.target		= XT_TARGET_INIT(XT_ERROR_TARGET,		       \
+					 sizeof(struct xt_error_target)),      \
+	.target.errorname = "ERROR",					       \
+}
+
+extern void *arpt_alloc_initial_table(const struct xt_table *);
+extern struct xt_table *arpt_register_table(struct net *net,
+					    const struct xt_table *table,
+					    const struct arpt_replace *repl);
+extern void arpt_unregister_table(struct xt_table *table);
+extern unsigned int arpt_do_table(struct sk_buff *skb,
+				  unsigned int hook,
+				  const struct net_device *in,
+				  const struct net_device *out,
+				  struct xt_table *table);
+
+#ifdef CONFIG_COMPAT
+#include <net/compat.h>
+
+struct compat_arpt_entry {
+	struct arpt_arp arp;
+	__u16 target_offset;
+	__u16 next_offset;
+	compat_uint_t comefrom;
+	struct compat_xt_counters counters;
+	unsigned char elems[0];
+};
+
+static inline struct xt_entry_target *
+compat_arpt_get_target(struct compat_arpt_entry *e)
+{
+	return (void *)e + e->target_offset;
+}
+
+#endif /* CONFIG_COMPAT */
+#endif /*__KERNEL__*/
+#endif /* _ARPTABLES_H */
diff --git a/include/linux/netfilter_arp/arpt_mangle.h b/include/linux/netfilter_arp/arpt_mangle.h
new file mode 100644
index 00000000..250f5029
--- /dev/null
+++ b/include/linux/netfilter_arp/arpt_mangle.h
@@ -0,0 +1,26 @@
+#ifndef _ARPT_MANGLE_H
+#define _ARPT_MANGLE_H
+#include <linux/netfilter_arp/arp_tables.h>
+
+#define ARPT_MANGLE_ADDR_LEN_MAX sizeof(struct in_addr)
+struct arpt_mangle
+{
+	char src_devaddr[ARPT_DEV_ADDR_LEN_MAX];
+	char tgt_devaddr[ARPT_DEV_ADDR_LEN_MAX];
+	union {
+		struct in_addr src_ip;
+	} u_s;
+	union {
+		struct in_addr tgt_ip;
+	} u_t;
+	u_int8_t flags;
+	int target;
+};
+
+#define ARPT_MANGLE_SDEV 0x01
+#define ARPT_MANGLE_TDEV 0x02
+#define ARPT_MANGLE_SIP 0x04
+#define ARPT_MANGLE_TIP 0x08
+#define ARPT_MANGLE_MASK 0x0f
+
+#endif /* _ARPT_MANGLE_H */
diff --git a/include/linux/netfilter_bridge.h b/include/linux/netfilter_bridge.h
new file mode 100644
index 00000000..31d2844e
--- /dev/null
+++ b/include/linux/netfilter_bridge.h
@@ -0,0 +1,122 @@
+#ifndef __LINUX_BRIDGE_NETFILTER_H
+#define __LINUX_BRIDGE_NETFILTER_H
+
+/* bridge-specific defines for netfilter. 
+ */
+
+#include <linux/netfilter.h>
+#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
+#include <linux/if_pppox.h>
+
+/* Bridge Hooks */
+/* After promisc drops, checksum checks. */
+#define NF_BR_PRE_ROUTING	0
+/* If the packet is destined for this box. */
+#define NF_BR_LOCAL_IN		1
+/* If the packet is destined for another interface. */
+#define NF_BR_FORWARD		2
+/* Packets coming from a local process. */
+#define NF_BR_LOCAL_OUT		3
+/* Packets about to hit the wire. */
+#define NF_BR_POST_ROUTING	4
+/* Not really a hook, but used for the ebtables broute table */
+#define NF_BR_BROUTING		5
+#define NF_BR_NUMHOOKS		6
+
+#ifdef __KERNEL__
+
+enum nf_br_hook_priorities {
+	NF_BR_PRI_FIRST = INT_MIN,
+	NF_BR_PRI_NAT_DST_BRIDGED = -300,
+	NF_BR_PRI_FILTER_BRIDGED = -200,
+	NF_BR_PRI_BRNF = 0,
+	NF_BR_PRI_NAT_DST_OTHER = 100,
+	NF_BR_PRI_FILTER_OTHER = 200,
+	NF_BR_PRI_NAT_SRC = 300,
+	NF_BR_PRI_LAST = INT_MAX,
+};
+
+#ifdef CONFIG_BRIDGE_NETFILTER
+
+#define BRNF_PKT_TYPE			0x01
+#define BRNF_BRIDGED_DNAT		0x02
+#define BRNF_BRIDGED			0x04
+#define BRNF_NF_BRIDGE_PREROUTING	0x08
+#define BRNF_8021Q			0x10
+#define BRNF_PPPoE			0x20
+
+/* Only used in br_forward.c */
+extern int nf_bridge_copy_header(struct sk_buff *skb);
+static inline int nf_bridge_maybe_copy_header(struct sk_buff *skb)
+{
+	if (skb->nf_bridge &&
+	    skb->nf_bridge->mask & (BRNF_BRIDGED | BRNF_BRIDGED_DNAT))
+		return nf_bridge_copy_header(skb);
+  	return 0;
+}
+
+static inline unsigned int nf_bridge_encap_header_len(const struct sk_buff *skb)
+{
+	switch (skb->protocol) {
+	case __cpu_to_be16(ETH_P_8021Q):
+		return VLAN_HLEN;
+	case __cpu_to_be16(ETH_P_PPP_SES):
+		return PPPOE_SES_HLEN;
+	default:
+		return 0;
+	}
+}
+
+static inline unsigned int nf_bridge_mtu_reduction(const struct sk_buff *skb)
+{
+	if (unlikely(skb->nf_bridge->mask & BRNF_PPPoE))
+		return PPPOE_SES_HLEN;
+	return 0;
+}
+
+extern int br_handle_frame_finish(struct sk_buff *skb);
+/* Only used in br_device.c */
+static inline int br_nf_pre_routing_finish_bridge_slow(struct sk_buff *skb)
+{
+	struct nf_bridge_info *nf_bridge = skb->nf_bridge;
+
+	skb_pull(skb, ETH_HLEN);
+	nf_bridge->mask ^= BRNF_BRIDGED_DNAT;
+	skb_copy_to_linear_data_offset(skb, -(ETH_HLEN-ETH_ALEN),
+				       skb->nf_bridge->data, ETH_HLEN-ETH_ALEN);
+	skb->dev = nf_bridge->physindev;
+	return br_handle_frame_finish(skb);
+}
+
+/* This is called by the IP fragmenting code and it ensures there is
+ * enough room for the encapsulating header (if there is one). */
+static inline unsigned int nf_bridge_pad(const struct sk_buff *skb)
+{
+	if (skb->nf_bridge)
+		return nf_bridge_encap_header_len(skb);
+	return 0;
+}
+
+struct bridge_skb_cb {
+	union {
+		__be32 ipv4;
+	} daddr;
+};
+
+static inline void br_drop_fake_rtable(struct sk_buff *skb)
+{
+	struct dst_entry *dst = skb_dst(skb);
+
+	if (dst && (dst->flags & DST_FAKE_RTABLE))
+		skb_dst_drop(skb);
+}
+
+#else
+#define nf_bridge_maybe_copy_header(skb)	(0)
+#define nf_bridge_pad(skb)			(0)
+#define br_drop_fake_rtable(skb)	        do { } while (0)
+#endif /* CONFIG_BRIDGE_NETFILTER */
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/include/linux/netfilter_bridge/Kbuild b/include/linux/netfilter_bridge/Kbuild
new file mode 100644
index 00000000..e48f1a3f
--- /dev/null
+++ b/include/linux/netfilter_bridge/Kbuild
@@ -0,0 +1,18 @@
+header-y += ebt_802_3.h
+header-y += ebt_among.h
+header-y += ebt_arp.h
+header-y += ebt_arpreply.h
+header-y += ebt_ip.h
+header-y += ebt_ip6.h
+header-y += ebt_limit.h
+header-y += ebt_log.h
+header-y += ebt_mark_m.h
+header-y += ebt_mark_t.h
+header-y += ebt_nat.h
+header-y += ebt_nflog.h
+header-y += ebt_pkttype.h
+header-y += ebt_redirect.h
+header-y += ebt_stp.h
+header-y += ebt_ulog.h
+header-y += ebt_vlan.h
+header-y += ebtables.h
diff --git a/include/linux/netfilter_bridge/ebt_802_3.h b/include/linux/netfilter_bridge/ebt_802_3.h
new file mode 100644
index 00000000..be5be157
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_802_3.h
@@ -0,0 +1,70 @@
+#ifndef __LINUX_BRIDGE_EBT_802_3_H
+#define __LINUX_BRIDGE_EBT_802_3_H
+
+#include <linux/types.h>
+
+#define EBT_802_3_SAP 0x01
+#define EBT_802_3_TYPE 0x02
+
+#define EBT_802_3_MATCH "802_3"
+
+/*
+ * If frame has DSAP/SSAP value 0xaa you must check the SNAP type
+ * to discover what kind of packet we're carrying. 
+ */
+#define CHECK_TYPE 0xaa
+
+/*
+ * Control field may be one or two bytes.  If the first byte has
+ * the value 0x03 then the entire length is one byte, otherwise it is two.
+ * One byte controls are used in Unnumbered Information frames.
+ * Two byte controls are used in Numbered Information frames.
+ */
+#define IS_UI 0x03
+
+#define EBT_802_3_MASK (EBT_802_3_SAP | EBT_802_3_TYPE | EBT_802_3)
+
+/* ui has one byte ctrl, ni has two */
+struct hdr_ui {
+	__u8 dsap;
+	__u8 ssap;
+	__u8 ctrl;
+	__u8 orig[3];
+	__be16 type;
+};
+
+struct hdr_ni {
+	__u8 dsap;
+	__u8 ssap;
+	__be16 ctrl;
+	__u8  orig[3];
+	__be16 type;
+};
+
+struct ebt_802_3_hdr {
+	__u8  daddr[6];
+	__u8  saddr[6];
+	__be16 len;
+	union {
+		struct hdr_ui ui;
+		struct hdr_ni ni;
+	} llc;
+};
+
+#ifdef __KERNEL__
+#include <linux/skbuff.h>
+
+static inline struct ebt_802_3_hdr *ebt_802_3_hdr(const struct sk_buff *skb)
+{
+	return (struct ebt_802_3_hdr *)skb_mac_header(skb);
+}
+#endif
+
+struct ebt_802_3_info {
+	__u8  sap;
+	__be16 type;
+	__u8  bitmask;
+	__u8  invflags;
+};
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebt_among.h b/include/linux/netfilter_bridge/ebt_among.h
new file mode 100644
index 00000000..bd4e3ad0
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_among.h
@@ -0,0 +1,64 @@
+#ifndef __LINUX_BRIDGE_EBT_AMONG_H
+#define __LINUX_BRIDGE_EBT_AMONG_H
+
+#include <linux/types.h>
+
+#define EBT_AMONG_DST 0x01
+#define EBT_AMONG_SRC 0x02
+
+/* Grzegorz Borowiak <grzes@gnu.univ.gda.pl> 2003
+ * 
+ * Write-once-read-many hash table, used for checking if a given
+ * MAC address belongs to a set or not and possibly for checking
+ * if it is related with a given IPv4 address.
+ *
+ * The hash value of an address is its last byte.
+ * 
+ * In real-world ethernet addresses, values of the last byte are
+ * evenly distributed and there is no need to consider other bytes.
+ * It would only slow the routines down.
+ *
+ * For MAC address comparison speedup reasons, we introduce a trick.
+ * MAC address is mapped onto an array of two 32-bit integers.
+ * This pair of integers is compared with MAC addresses in the
+ * hash table, which are stored also in form of pairs of integers
+ * (in `cmp' array). This is quick as it requires only two elementary
+ * number comparisons in worst case. Further, we take advantage of
+ * fact that entropy of 3 last bytes of address is larger than entropy
+ * of 3 first bytes. So first we compare 4 last bytes of addresses and
+ * if they are the same we compare 2 first.
+ *
+ * Yes, it is a memory overhead, but in 2003 AD, who cares?
+ */
+
+struct ebt_mac_wormhash_tuple {
+	__u32 cmp[2];
+	__be32 ip;
+};
+
+struct ebt_mac_wormhash {
+	int table[257];
+	int poolsize;
+	struct ebt_mac_wormhash_tuple pool[0];
+};
+
+#define ebt_mac_wormhash_size(x) ((x) ? sizeof(struct ebt_mac_wormhash) \
+		+ (x)->poolsize * sizeof(struct ebt_mac_wormhash_tuple) : 0)
+
+struct ebt_among_info {
+	int wh_dst_ofs;
+	int wh_src_ofs;
+	int bitmask;
+};
+
+#define EBT_AMONG_DST_NEG 0x1
+#define EBT_AMONG_SRC_NEG 0x2
+
+#define ebt_among_wh_dst(x) ((x)->wh_dst_ofs ? \
+	(struct ebt_mac_wormhash*)((char*)(x) + (x)->wh_dst_ofs) : NULL)
+#define ebt_among_wh_src(x) ((x)->wh_src_ofs ? \
+	(struct ebt_mac_wormhash*)((char*)(x) + (x)->wh_src_ofs) : NULL)
+
+#define EBT_AMONG_MATCH "among"
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebt_arp.h b/include/linux/netfilter_bridge/ebt_arp.h
new file mode 100644
index 00000000..522f3e42
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_arp.h
@@ -0,0 +1,36 @@
+#ifndef __LINUX_BRIDGE_EBT_ARP_H
+#define __LINUX_BRIDGE_EBT_ARP_H
+
+#include <linux/types.h>
+
+#define EBT_ARP_OPCODE 0x01
+#define EBT_ARP_HTYPE 0x02
+#define EBT_ARP_PTYPE 0x04
+#define EBT_ARP_SRC_IP 0x08
+#define EBT_ARP_DST_IP 0x10
+#define EBT_ARP_SRC_MAC 0x20
+#define EBT_ARP_DST_MAC 0x40
+#define EBT_ARP_GRAT 0x80
+#define EBT_ARP_MASK (EBT_ARP_OPCODE | EBT_ARP_HTYPE | EBT_ARP_PTYPE | \
+   EBT_ARP_SRC_IP | EBT_ARP_DST_IP | EBT_ARP_SRC_MAC | EBT_ARP_DST_MAC | \
+   EBT_ARP_GRAT)
+#define EBT_ARP_MATCH "arp"
+
+struct ebt_arp_info
+{
+	__be16 htype;
+	__be16 ptype;
+	__be16 opcode;
+	__be32 saddr;
+	__be32 smsk;
+	__be32 daddr;
+	__be32 dmsk;
+	unsigned char smaddr[ETH_ALEN];
+	unsigned char smmsk[ETH_ALEN];
+	unsigned char dmaddr[ETH_ALEN];
+	unsigned char dmmsk[ETH_ALEN];
+	__u8  bitmask;
+	__u8  invflags;
+};
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebt_arpreply.h b/include/linux/netfilter_bridge/ebt_arpreply.h
new file mode 100644
index 00000000..7e77896e
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_arpreply.h
@@ -0,0 +1,10 @@
+#ifndef __LINUX_BRIDGE_EBT_ARPREPLY_H
+#define __LINUX_BRIDGE_EBT_ARPREPLY_H
+
+struct ebt_arpreply_info {
+	unsigned char mac[ETH_ALEN];
+	int target;
+};
+#define EBT_ARPREPLY_TARGET "arpreply"
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebt_ip.h b/include/linux/netfilter_bridge/ebt_ip.h
new file mode 100644
index 00000000..c4bbc41b
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_ip.h
@@ -0,0 +1,44 @@
+/*
+ *  ebt_ip
+ *
+ *	Authors:
+ *	Bart De Schuymer <bart.de.schuymer@pandora.be>
+ *
+ *  April, 2002
+ *
+ *  Changes:
+ *    added ip-sport and ip-dport
+ *    Innominate Security Technologies AG <mhopf@innominate.com>
+ *    September, 2002
+ */
+
+#ifndef __LINUX_BRIDGE_EBT_IP_H
+#define __LINUX_BRIDGE_EBT_IP_H
+
+#include <linux/types.h>
+
+#define EBT_IP_SOURCE 0x01
+#define EBT_IP_DEST 0x02
+#define EBT_IP_TOS 0x04
+#define EBT_IP_PROTO 0x08
+#define EBT_IP_SPORT 0x10
+#define EBT_IP_DPORT 0x20
+#define EBT_IP_MASK (EBT_IP_SOURCE | EBT_IP_DEST | EBT_IP_TOS | EBT_IP_PROTO |\
+ EBT_IP_SPORT | EBT_IP_DPORT )
+#define EBT_IP_MATCH "ip"
+
+/* the same values are used for the invflags */
+struct ebt_ip_info {
+	__be32 saddr;
+	__be32 daddr;
+	__be32 smsk;
+	__be32 dmsk;
+	__u8  tos;
+	__u8  protocol;
+	__u8  bitmask;
+	__u8  invflags;
+	__u16 sport[2];
+	__u16 dport[2];
+};
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebt_ip6.h b/include/linux/netfilter_bridge/ebt_ip6.h
new file mode 100644
index 00000000..42b88968
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_ip6.h
@@ -0,0 +1,50 @@
+/*
+ *  ebt_ip6
+ *
+ *	Authors:
+ * Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
+ * Manohar Castelino <manohar.r.castelino@intel.com>
+ *
+ *  Jan 11, 2008
+ *
+ */
+
+#ifndef __LINUX_BRIDGE_EBT_IP6_H
+#define __LINUX_BRIDGE_EBT_IP6_H
+
+#include <linux/types.h>
+
+#define EBT_IP6_SOURCE 0x01
+#define EBT_IP6_DEST 0x02
+#define EBT_IP6_TCLASS 0x04
+#define EBT_IP6_PROTO 0x08
+#define EBT_IP6_SPORT 0x10
+#define EBT_IP6_DPORT 0x20
+#define EBT_IP6_ICMP6 0x40
+
+#define EBT_IP6_MASK (EBT_IP6_SOURCE | EBT_IP6_DEST | EBT_IP6_TCLASS |\
+		      EBT_IP6_PROTO | EBT_IP6_SPORT | EBT_IP6_DPORT | \
+		      EBT_IP6_ICMP6)
+#define EBT_IP6_MATCH "ip6"
+
+/* the same values are used for the invflags */
+struct ebt_ip6_info {
+	struct in6_addr saddr;
+	struct in6_addr daddr;
+	struct in6_addr smsk;
+	struct in6_addr dmsk;
+	__u8  tclass;
+	__u8  protocol;
+	__u8  bitmask;
+	__u8  invflags;
+	union {
+		__u16 sport[2];
+		__u8 icmpv6_type[2];
+	};
+	union {
+		__u16 dport[2];
+		__u8 icmpv6_code[2];
+	};
+};
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebt_limit.h b/include/linux/netfilter_bridge/ebt_limit.h
new file mode 100644
index 00000000..66d80b30
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_limit.h
@@ -0,0 +1,24 @@
+#ifndef __LINUX_BRIDGE_EBT_LIMIT_H
+#define __LINUX_BRIDGE_EBT_LIMIT_H
+
+#include <linux/types.h>
+
+#define EBT_LIMIT_MATCH "limit"
+
+/* timings are in milliseconds. */
+#define EBT_LIMIT_SCALE 10000
+
+/* 1/10,000 sec period => max of 10,000/sec.  Min rate is then 429490
+   seconds, or one every 59 hours. */
+
+struct ebt_limit_info {
+	__u32 avg;    /* Average secs between packets * scale */
+	__u32 burst;  /* Period multiplier for upper limit. */
+
+	/* Used internally by the kernel */
+	unsigned long prev;
+	__u32 credit;
+	__u32 credit_cap, cost;
+};
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebt_log.h b/include/linux/netfilter_bridge/ebt_log.h
new file mode 100644
index 00000000..7e7f1d1f
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_log.h
@@ -0,0 +1,20 @@
+#ifndef __LINUX_BRIDGE_EBT_LOG_H
+#define __LINUX_BRIDGE_EBT_LOG_H
+
+#include <linux/types.h>
+
+#define EBT_LOG_IP 0x01 /* if the frame is made by ip, log the ip information */
+#define EBT_LOG_ARP 0x02
+#define EBT_LOG_NFLOG 0x04
+#define EBT_LOG_IP6 0x08
+#define EBT_LOG_MASK (EBT_LOG_IP | EBT_LOG_ARP | EBT_LOG_IP6)
+#define EBT_LOG_PREFIX_SIZE 30
+#define EBT_LOG_WATCHER "log"
+
+struct ebt_log_info {
+	__u8 loglevel;
+	__u8 prefix[EBT_LOG_PREFIX_SIZE];
+	__u32 bitmask;
+};
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebt_mark_m.h b/include/linux/netfilter_bridge/ebt_mark_m.h
new file mode 100644
index 00000000..410f9e5a
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_mark_m.h
@@ -0,0 +1,16 @@
+#ifndef __LINUX_BRIDGE_EBT_MARK_M_H
+#define __LINUX_BRIDGE_EBT_MARK_M_H
+
+#include <linux/types.h>
+
+#define EBT_MARK_AND 0x01
+#define EBT_MARK_OR 0x02
+#define EBT_MARK_MASK (EBT_MARK_AND | EBT_MARK_OR)
+struct ebt_mark_m_info {
+	unsigned long mark, mask;
+	__u8 invert;
+	__u8 bitmask;
+};
+#define EBT_MARK_MATCH "mark_m"
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebt_mark_t.h b/include/linux/netfilter_bridge/ebt_mark_t.h
new file mode 100644
index 00000000..7d5a268a
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_mark_t.h
@@ -0,0 +1,23 @@
+#ifndef __LINUX_BRIDGE_EBT_MARK_T_H
+#define __LINUX_BRIDGE_EBT_MARK_T_H
+
+/* The target member is reused for adding new actions, the
+ * value of the real target is -1 to -NUM_STANDARD_TARGETS.
+ * For backward compatibility, the 4 lsb (2 would be enough,
+ * but let's play it safe) are kept to designate this target.
+ * The remaining bits designate the action. By making the set
+ * action 0xfffffff0, the result will look ok for older
+ * versions. [September 2006] */
+#define MARK_SET_VALUE (0xfffffff0)
+#define MARK_OR_VALUE  (0xffffffe0)
+#define MARK_AND_VALUE (0xffffffd0)
+#define MARK_XOR_VALUE (0xffffffc0)
+
+struct ebt_mark_t_info {
+	unsigned long mark;
+	/* EBT_ACCEPT, EBT_DROP, EBT_CONTINUE or EBT_RETURN */
+	int target;
+};
+#define EBT_MARK_TARGET "mark"
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebt_nat.h b/include/linux/netfilter_bridge/ebt_nat.h
new file mode 100644
index 00000000..5e74e3b0
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_nat.h
@@ -0,0 +1,13 @@
+#ifndef __LINUX_BRIDGE_EBT_NAT_H
+#define __LINUX_BRIDGE_EBT_NAT_H
+
+#define NAT_ARP_BIT  (0x00000010)
+struct ebt_nat_info {
+	unsigned char mac[ETH_ALEN];
+	/* EBT_ACCEPT, EBT_DROP, EBT_CONTINUE or EBT_RETURN */
+	int target;
+};
+#define EBT_SNAT_TARGET "snat"
+#define EBT_DNAT_TARGET "dnat"
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebt_nflog.h b/include/linux/netfilter_bridge/ebt_nflog.h
new file mode 100644
index 00000000..df829fce
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_nflog.h
@@ -0,0 +1,23 @@
+#ifndef __LINUX_BRIDGE_EBT_NFLOG_H
+#define __LINUX_BRIDGE_EBT_NFLOG_H
+
+#include <linux/types.h>
+
+#define EBT_NFLOG_MASK 0x0
+
+#define EBT_NFLOG_PREFIX_SIZE 64
+#define EBT_NFLOG_WATCHER "nflog"
+
+#define EBT_NFLOG_DEFAULT_GROUP		0x1
+#define EBT_NFLOG_DEFAULT_THRESHOLD	1
+
+struct ebt_nflog_info {
+	__u32 len;
+	__u16 group;
+	__u16 threshold;
+	__u16 flags;
+	__u16 pad;
+	char prefix[EBT_NFLOG_PREFIX_SIZE];
+};
+
+#endif				/* __LINUX_BRIDGE_EBT_NFLOG_H */
diff --git a/include/linux/netfilter_bridge/ebt_pkttype.h b/include/linux/netfilter_bridge/ebt_pkttype.h
new file mode 100644
index 00000000..c241badc
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_pkttype.h
@@ -0,0 +1,12 @@
+#ifndef __LINUX_BRIDGE_EBT_PKTTYPE_H
+#define __LINUX_BRIDGE_EBT_PKTTYPE_H
+
+#include <linux/types.h>
+
+struct ebt_pkttype_info {
+	__u8 pkt_type;
+	__u8 invert;
+};
+#define EBT_PKTTYPE_MATCH "pkttype"
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebt_redirect.h b/include/linux/netfilter_bridge/ebt_redirect.h
new file mode 100644
index 00000000..dd9622ce
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_redirect.h
@@ -0,0 +1,10 @@
+#ifndef __LINUX_BRIDGE_EBT_REDIRECT_H
+#define __LINUX_BRIDGE_EBT_REDIRECT_H
+
+struct ebt_redirect_info {
+	/* EBT_ACCEPT, EBT_DROP, EBT_CONTINUE or EBT_RETURN */
+	int target;
+};
+#define EBT_REDIRECT_TARGET "redirect"
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebt_stp.h b/include/linux/netfilter_bridge/ebt_stp.h
new file mode 100644
index 00000000..1025b9f5
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_stp.h
@@ -0,0 +1,46 @@
+#ifndef __LINUX_BRIDGE_EBT_STP_H
+#define __LINUX_BRIDGE_EBT_STP_H
+
+#include <linux/types.h>
+
+#define EBT_STP_TYPE		0x0001
+
+#define EBT_STP_FLAGS		0x0002
+#define EBT_STP_ROOTPRIO	0x0004
+#define EBT_STP_ROOTADDR	0x0008
+#define EBT_STP_ROOTCOST	0x0010
+#define EBT_STP_SENDERPRIO	0x0020
+#define EBT_STP_SENDERADDR	0x0040
+#define EBT_STP_PORT		0x0080
+#define EBT_STP_MSGAGE		0x0100
+#define EBT_STP_MAXAGE		0x0200
+#define EBT_STP_HELLOTIME	0x0400
+#define EBT_STP_FWDD		0x0800
+
+#define EBT_STP_MASK		0x0fff
+#define EBT_STP_CONFIG_MASK	0x0ffe
+
+#define EBT_STP_MATCH "stp"
+
+struct ebt_stp_config_info {
+	__u8 flags;
+	__u16 root_priol, root_priou;
+	char root_addr[6], root_addrmsk[6];
+	__u32 root_costl, root_costu;
+	__u16 sender_priol, sender_priou;
+	char sender_addr[6], sender_addrmsk[6];
+	__u16 portl, portu;
+	__u16 msg_agel, msg_ageu;
+	__u16 max_agel, max_ageu;
+	__u16 hello_timel, hello_timeu;
+	__u16 forward_delayl, forward_delayu;
+};
+
+struct ebt_stp_info {
+	__u8 type;
+	struct ebt_stp_config_info config;
+	__u16 bitmask;
+	__u16 invflags;
+};
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebt_ulog.h b/include/linux/netfilter_bridge/ebt_ulog.h
new file mode 100644
index 00000000..89a6becb
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_ulog.h
@@ -0,0 +1,38 @@
+#ifndef _EBT_ULOG_H
+#define _EBT_ULOG_H
+
+#include <linux/types.h>
+
+#define EBT_ULOG_DEFAULT_NLGROUP 0
+#define EBT_ULOG_DEFAULT_QTHRESHOLD 1
+#define EBT_ULOG_MAXNLGROUPS 32 /* hardcoded netlink max */
+#define EBT_ULOG_PREFIX_LEN 32
+#define EBT_ULOG_MAX_QLEN 50
+#define EBT_ULOG_WATCHER "ulog"
+#define EBT_ULOG_VERSION 1
+
+struct ebt_ulog_info {
+	__u32 nlgroup;
+	unsigned int cprange;
+	unsigned int qthreshold;
+	char prefix[EBT_ULOG_PREFIX_LEN];
+};
+
+typedef struct ebt_ulog_packet_msg {
+	int version;
+	char indev[IFNAMSIZ];
+	char outdev[IFNAMSIZ];
+	char physindev[IFNAMSIZ];
+	char physoutdev[IFNAMSIZ];
+	char prefix[EBT_ULOG_PREFIX_LEN];
+	struct timeval stamp;
+	unsigned long mark;
+	unsigned int hook;
+	size_t data_len;
+	/* The complete packet, including Ethernet header and perhaps
+	 * the VLAN header is appended */
+	unsigned char data[0] __attribute__
+	                      ((aligned (__alignof__(struct ebt_ulog_info))));
+} ebt_ulog_packet_msg_t;
+
+#endif /* _EBT_ULOG_H */
diff --git a/include/linux/netfilter_bridge/ebt_vlan.h b/include/linux/netfilter_bridge/ebt_vlan.h
new file mode 100644
index 00000000..967d1d5c
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebt_vlan.h
@@ -0,0 +1,22 @@
+#ifndef __LINUX_BRIDGE_EBT_VLAN_H
+#define __LINUX_BRIDGE_EBT_VLAN_H
+
+#include <linux/types.h>
+
+#define EBT_VLAN_ID	0x01
+#define EBT_VLAN_PRIO	0x02
+#define EBT_VLAN_ENCAP	0x04
+#define EBT_VLAN_MASK (EBT_VLAN_ID | EBT_VLAN_PRIO | EBT_VLAN_ENCAP)
+#define EBT_VLAN_MATCH "vlan"
+
+struct ebt_vlan_info {
+	__u16 id;		/* VLAN ID {1-4095} */
+	__u8 prio;		/* VLAN User Priority {0-7} */
+	__be16 encap;		/* VLAN Encapsulated frame code {0-65535} */
+	__u8 bitmask;		/* Args bitmask bit 1=1 - ID arg,
+				   bit 2=1 User-Priority arg, bit 3=1 encap*/
+	__u8 invflags;		/* Inverse bitmask  bit 1=1 - inversed ID arg, 
+				   bit 2=1 - inversed Pirority arg */
+};
+
+#endif
diff --git a/include/linux/netfilter_bridge/ebtables.h b/include/linux/netfilter_bridge/ebtables.h
new file mode 100644
index 00000000..4dd5bd69
--- /dev/null
+++ b/include/linux/netfilter_bridge/ebtables.h
@@ -0,0 +1,380 @@
+/*
+ *  ebtables
+ *
+ *	Authors:
+ *	Bart De Schuymer		<bdschuym@pandora.be>
+ *
+ *  ebtables.c,v 2.0, April, 2002
+ *
+ *  This code is stongly inspired on the iptables code which is
+ *  Copyright (C) 1999 Paul `Rusty' Russell & Michael J. Neuling
+ */
+
+#ifndef __LINUX_BRIDGE_EFF_H
+#define __LINUX_BRIDGE_EFF_H
+#include <linux/if.h>
+#include <linux/netfilter_bridge.h>
+#include <linux/if_ether.h>
+
+#define EBT_TABLE_MAXNAMELEN 32
+#define EBT_CHAIN_MAXNAMELEN EBT_TABLE_MAXNAMELEN
+#define EBT_FUNCTION_MAXNAMELEN EBT_TABLE_MAXNAMELEN
+
+/* verdicts >0 are "branches" */
+#define EBT_ACCEPT   -1
+#define EBT_DROP     -2
+#define EBT_CONTINUE -3
+#define EBT_RETURN   -4
+#define NUM_STANDARD_TARGETS   4
+/* ebtables target modules store the verdict inside an int. We can
+ * reclaim a part of this int for backwards compatible extensions.
+ * The 4 lsb are more than enough to store the verdict. */
+#define EBT_VERDICT_BITS 0x0000000F
+
+struct xt_match;
+struct xt_target;
+
+struct ebt_counter {
+	uint64_t pcnt;
+	uint64_t bcnt;
+};
+
+struct ebt_replace {
+	char name[EBT_TABLE_MAXNAMELEN];
+	unsigned int valid_hooks;
+	/* nr of rules in the table */
+	unsigned int nentries;
+	/* total size of the entries */
+	unsigned int entries_size;
+	/* start of the chains */
+	struct ebt_entries __user *hook_entry[NF_BR_NUMHOOKS];
+	/* nr of counters userspace expects back */
+	unsigned int num_counters;
+	/* where the kernel will put the old counters */
+	struct ebt_counter __user *counters;
+	char __user *entries;
+};
+
+struct ebt_replace_kernel {
+	char name[EBT_TABLE_MAXNAMELEN];
+	unsigned int valid_hooks;
+	/* nr of rules in the table */
+	unsigned int nentries;
+	/* total size of the entries */
+	unsigned int entries_size;
+	/* start of the chains */
+	struct ebt_entries *hook_entry[NF_BR_NUMHOOKS];
+	/* nr of counters userspace expects back */
+	unsigned int num_counters;
+	/* where the kernel will put the old counters */
+	struct ebt_counter *counters;
+	char *entries;
+};
+
+struct ebt_entries {
+	/* this field is always set to zero
+	 * See EBT_ENTRY_OR_ENTRIES.
+	 * Must be same size as ebt_entry.bitmask */
+	unsigned int distinguisher;
+	/* the chain name */
+	char name[EBT_CHAIN_MAXNAMELEN];
+	/* counter offset for this chain */
+	unsigned int counter_offset;
+	/* one standard (accept, drop, return) per hook */
+	int policy;
+	/* nr. of entries */
+	unsigned int nentries;
+	/* entry list */
+	char data[0] __attribute__ ((aligned (__alignof__(struct ebt_replace))));
+};
+
+/* used for the bitmask of struct ebt_entry */
+
+/* This is a hack to make a difference between an ebt_entry struct and an
+ * ebt_entries struct when traversing the entries from start to end.
+ * Using this simplifies the code a lot, while still being able to use
+ * ebt_entries.
+ * Contrary, iptables doesn't use something like ebt_entries and therefore uses
+ * different techniques for naming the policy and such. So, iptables doesn't
+ * need a hack like this.
+ */
+#define EBT_ENTRY_OR_ENTRIES 0x01
+/* these are the normal masks */
+#define EBT_NOPROTO 0x02
+#define EBT_802_3 0x04
+#define EBT_SOURCEMAC 0x08
+#define EBT_DESTMAC 0x10
+#define EBT_F_MASK (EBT_NOPROTO | EBT_802_3 | EBT_SOURCEMAC | EBT_DESTMAC \
+   | EBT_ENTRY_OR_ENTRIES)
+
+#define EBT_IPROTO 0x01
+#define EBT_IIN 0x02
+#define EBT_IOUT 0x04
+#define EBT_ISOURCE 0x8
+#define EBT_IDEST 0x10
+#define EBT_ILOGICALIN 0x20
+#define EBT_ILOGICALOUT 0x40
+#define EBT_INV_MASK (EBT_IPROTO | EBT_IIN | EBT_IOUT | EBT_ILOGICALIN \
+   | EBT_ILOGICALOUT | EBT_ISOURCE | EBT_IDEST)
+
+struct ebt_entry_match {
+	union {
+		char name[EBT_FUNCTION_MAXNAMELEN];
+		struct xt_match *match;
+	} u;
+	/* size of data */
+	unsigned int match_size;
+	unsigned char data[0] __attribute__ ((aligned (__alignof__(struct ebt_replace))));
+};
+
+struct ebt_entry_watcher {
+	union {
+		char name[EBT_FUNCTION_MAXNAMELEN];
+		struct xt_target *watcher;
+	} u;
+	/* size of data */
+	unsigned int watcher_size;
+	unsigned char data[0] __attribute__ ((aligned (__alignof__(struct ebt_replace))));
+};
+
+struct ebt_entry_target {
+	union {
+		char name[EBT_FUNCTION_MAXNAMELEN];
+		struct xt_target *target;
+	} u;
+	/* size of data */
+	unsigned int target_size;
+	unsigned char data[0] __attribute__ ((aligned (__alignof__(struct ebt_replace))));
+};
+
+#define EBT_STANDARD_TARGET "standard"
+struct ebt_standard_target {
+	struct ebt_entry_target target;
+	int verdict;
+};
+
+/* one entry */
+struct ebt_entry {
+	/* this needs to be the first field */
+	unsigned int bitmask;
+	unsigned int invflags;
+	__be16 ethproto;
+	/* the physical in-dev */
+	char in[IFNAMSIZ];
+	/* the logical in-dev */
+	char logical_in[IFNAMSIZ];
+	/* the physical out-dev */
+	char out[IFNAMSIZ];
+	/* the logical out-dev */
+	char logical_out[IFNAMSIZ];
+	unsigned char sourcemac[ETH_ALEN];
+	unsigned char sourcemsk[ETH_ALEN];
+	unsigned char destmac[ETH_ALEN];
+	unsigned char destmsk[ETH_ALEN];
+	/* sizeof ebt_entry + matches */
+	unsigned int watchers_offset;
+	/* sizeof ebt_entry + matches + watchers */
+	unsigned int target_offset;
+	/* sizeof ebt_entry + matches + watchers + target */
+	unsigned int next_offset;
+	unsigned char elems[0] __attribute__ ((aligned (__alignof__(struct ebt_replace))));
+};
+
+/* {g,s}etsockopt numbers */
+#define EBT_BASE_CTL            128
+
+#define EBT_SO_SET_ENTRIES      (EBT_BASE_CTL)
+#define EBT_SO_SET_COUNTERS     (EBT_SO_SET_ENTRIES+1)
+#define EBT_SO_SET_MAX          (EBT_SO_SET_COUNTERS+1)
+
+#define EBT_SO_GET_INFO         (EBT_BASE_CTL)
+#define EBT_SO_GET_ENTRIES      (EBT_SO_GET_INFO+1)
+#define EBT_SO_GET_INIT_INFO    (EBT_SO_GET_ENTRIES+1)
+#define EBT_SO_GET_INIT_ENTRIES (EBT_SO_GET_INIT_INFO+1)
+#define EBT_SO_GET_MAX          (EBT_SO_GET_INIT_ENTRIES+1)
+
+#ifdef __KERNEL__
+
+/* return values for match() functions */
+#define EBT_MATCH 0
+#define EBT_NOMATCH 1
+
+struct ebt_match {
+	struct list_head list;
+	const char name[EBT_FUNCTION_MAXNAMELEN];
+	bool (*match)(const struct sk_buff *skb, const struct net_device *in,
+		const struct net_device *out, const struct xt_match *match,
+		const void *matchinfo, int offset, unsigned int protoff,
+		bool *hotdrop);
+	bool (*checkentry)(const char *table, const void *entry,
+		const struct xt_match *match, void *matchinfo,
+		unsigned int hook_mask);
+	void (*destroy)(const struct xt_match *match, void *matchinfo);
+	unsigned int matchsize;
+	u_int8_t revision;
+	u_int8_t family;
+	struct module *me;
+};
+
+struct ebt_watcher {
+	struct list_head list;
+	const char name[EBT_FUNCTION_MAXNAMELEN];
+	unsigned int (*target)(struct sk_buff *skb,
+		const struct net_device *in, const struct net_device *out,
+		unsigned int hook_num, const struct xt_target *target,
+		const void *targinfo);
+	bool (*checkentry)(const char *table, const void *entry,
+		const struct xt_target *target, void *targinfo,
+		unsigned int hook_mask);
+	void (*destroy)(const struct xt_target *target, void *targinfo);
+	unsigned int targetsize;
+	u_int8_t revision;
+	u_int8_t family;
+	struct module *me;
+};
+
+struct ebt_target {
+	struct list_head list;
+	const char name[EBT_FUNCTION_MAXNAMELEN];
+	/* returns one of the standard EBT_* verdicts */
+	unsigned int (*target)(struct sk_buff *skb,
+		const struct net_device *in, const struct net_device *out,
+		unsigned int hook_num, const struct xt_target *target,
+		const void *targinfo);
+	bool (*checkentry)(const char *table, const void *entry,
+		const struct xt_target *target, void *targinfo,
+		unsigned int hook_mask);
+	void (*destroy)(const struct xt_target *target, void *targinfo);
+	unsigned int targetsize;
+	u_int8_t revision;
+	u_int8_t family;
+	struct module *me;
+};
+
+/* used for jumping from and into user defined chains (udc) */
+struct ebt_chainstack {
+	struct ebt_entries *chaininfo; /* pointer to chain data */
+	struct ebt_entry *e; /* pointer to entry data */
+	unsigned int n; /* n'th entry */
+};
+
+struct ebt_table_info {
+	/* total size of the entries */
+	unsigned int entries_size;
+	unsigned int nentries;
+	/* pointers to the start of the chains */
+	struct ebt_entries *hook_entry[NF_BR_NUMHOOKS];
+	/* room to maintain the stack used for jumping from and into udc */
+	struct ebt_chainstack **chainstack;
+	char *entries;
+	struct ebt_counter counters[0] ____cacheline_aligned;
+};
+
+struct ebt_table {
+	struct list_head list;
+	char name[EBT_TABLE_MAXNAMELEN];
+	struct ebt_replace_kernel *table;
+	unsigned int valid_hooks;
+	rwlock_t lock;
+	/* e.g. could be the table explicitly only allows certain
+	 * matches, targets, ... 0 == let it in */
+	int (*check)(const struct ebt_table_info *info,
+	   unsigned int valid_hooks);
+	/* the data used by the kernel */
+	struct ebt_table_info *private;
+	struct module *me;
+};
+
+#define EBT_ALIGN(s) (((s) + (__alignof__(struct _xt_align)-1)) & \
+		     ~(__alignof__(struct _xt_align)-1))
+extern struct ebt_table *ebt_register_table(struct net *net,
+					    const struct ebt_table *table);
+extern void ebt_unregister_table(struct net *net, struct ebt_table *table);
+extern unsigned int ebt_do_table(unsigned int hook, struct sk_buff *skb,
+   const struct net_device *in, const struct net_device *out,
+   struct ebt_table *table);
+
+/* Used in the kernel match() functions */
+#define FWINV(bool,invflg) ((bool) ^ !!(info->invflags & invflg))
+/* True if the hook mask denotes that the rule is in a base chain,
+ * used in the check() functions */
+#define BASE_CHAIN (par->hook_mask & (1 << NF_BR_NUMHOOKS))
+/* Clear the bit in the hook mask that tells if the rule is on a base chain */
+#define CLEAR_BASE_CHAIN_BIT (par->hook_mask &= ~(1 << NF_BR_NUMHOOKS))
+/* True if the target is not a standard target */
+#define INVALID_TARGET (info->target < -NUM_STANDARD_TARGETS || info->target >= 0)
+
+#endif /* __KERNEL__ */
+
+/* blatently stolen from ip_tables.h
+ * fn returns 0 to continue iteration */
+#define EBT_MATCH_ITERATE(e, fn, args...)                   \
+({                                                          \
+	unsigned int __i;                                   \
+	int __ret = 0;                                      \
+	struct ebt_entry_match *__match;                    \
+	                                                    \
+	for (__i = sizeof(struct ebt_entry);                \
+	     __i < (e)->watchers_offset;                    \
+	     __i += __match->match_size +                   \
+	     sizeof(struct ebt_entry_match)) {              \
+		__match = (void *)(e) + __i;                \
+		                                            \
+		__ret = fn(__match , ## args);              \
+		if (__ret != 0)                             \
+			break;                              \
+	}                                                   \
+	if (__ret == 0) {                                   \
+		if (__i != (e)->watchers_offset)            \
+			__ret = -EINVAL;                    \
+	}                                                   \
+	__ret;                                              \
+})
+
+#define EBT_WATCHER_ITERATE(e, fn, args...)                 \
+({                                                          \
+	unsigned int __i;                                   \
+	int __ret = 0;                                      \
+	struct ebt_entry_watcher *__watcher;                \
+	                                                    \
+	for (__i = e->watchers_offset;                      \
+	     __i < (e)->target_offset;                      \
+	     __i += __watcher->watcher_size +               \
+	     sizeof(struct ebt_entry_watcher)) {            \
+		__watcher = (void *)(e) + __i;              \
+		                                            \
+		__ret = fn(__watcher , ## args);            \
+		if (__ret != 0)                             \
+			break;                              \
+	}                                                   \
+	if (__ret == 0) {                                   \
+		if (__i != (e)->target_offset)              \
+			__ret = -EINVAL;                    \
+	}                                                   \
+	__ret;                                              \
+})
+
+#define EBT_ENTRY_ITERATE(entries, size, fn, args...)       \
+({                                                          \
+	unsigned int __i;                                   \
+	int __ret = 0;                                      \
+	struct ebt_entry *__entry;                          \
+	                                                    \
+	for (__i = 0; __i < (size);) {                      \
+		__entry = (void *)(entries) + __i;          \
+		__ret = fn(__entry , ## args);              \
+		if (__ret != 0)                             \
+			break;                              \
+		if (__entry->bitmask != 0)                  \
+			__i += __entry->next_offset;        \
+		else                                        \
+			__i += sizeof(struct ebt_entries);  \
+	}                                                   \
+	if (__ret == 0) {                                   \
+		if (__i != (size))                          \
+			__ret = -EINVAL;                    \
+	}                                                   \
+	__ret;                                              \
+})
+
+#endif
diff --git a/include/linux/netfilter_decnet.h b/include/linux/netfilter_decnet.h
new file mode 100644
index 00000000..0b09732a
--- /dev/null
+++ b/include/linux/netfilter_decnet.h
@@ -0,0 +1,79 @@
+#ifndef __LINUX_DECNET_NETFILTER_H
+#define __LINUX_DECNET_NETFILTER_H
+
+/* DECnet-specific defines for netfilter. 
+ * This file (C) Steve Whitehouse 1999 derived from the
+ * ipv4 netfilter header file which is
+ * (C)1998 Rusty Russell -- This code is GPL.
+ */
+
+#include <linux/netfilter.h>
+
+/* only for userspace compatibility */
+#ifndef __KERNEL__
+
+#include <limits.h> /* for INT_MIN, INT_MAX */
+
+/* IP Cache bits. */
+/* Src IP address. */
+#define NFC_DN_SRC		0x0001
+/* Dest IP address. */
+#define NFC_DN_DST		0x0002
+/* Input device. */
+#define NFC_DN_IF_IN		0x0004
+/* Output device. */
+#define NFC_DN_IF_OUT		0x0008
+#endif /* ! __KERNEL__ */
+
+/* DECnet Hooks */
+/* After promisc drops, checksum checks. */
+#define NF_DN_PRE_ROUTING	0
+/* If the packet is destined for this box. */
+#define NF_DN_LOCAL_IN		1
+/* If the packet is destined for another interface. */
+#define NF_DN_FORWARD		2
+/* Packets coming from a local process. */
+#define NF_DN_LOCAL_OUT		3
+/* Packets about to hit the wire. */
+#define NF_DN_POST_ROUTING	4
+/* Input Hello Packets */
+#define NF_DN_HELLO		5
+/* Input Routing Packets */
+#define NF_DN_ROUTE		6
+#define NF_DN_NUMHOOKS		7
+
+enum nf_dn_hook_priorities {
+	NF_DN_PRI_FIRST = INT_MIN,
+	NF_DN_PRI_CONNTRACK = -200,
+	NF_DN_PRI_MANGLE = -150,
+	NF_DN_PRI_NAT_DST = -100,
+	NF_DN_PRI_FILTER = 0,
+	NF_DN_PRI_NAT_SRC = 100,
+	NF_DN_PRI_DNRTMSG = 200,
+	NF_DN_PRI_LAST = INT_MAX,
+};
+
+struct nf_dn_rtmsg {
+	int nfdn_ifindex;
+};
+
+#define NFDN_RTMSG(r) ((unsigned char *)(r) + NLMSG_ALIGN(sizeof(struct nf_dn_rtmsg)))
+
+#ifndef __KERNEL__
+/* backwards compatibility for userspace */
+#define DNRMG_L1_GROUP 0x01
+#define DNRMG_L2_GROUP 0x02
+#endif
+
+enum {
+	DNRNG_NLGRP_NONE,
+#define DNRNG_NLGRP_NONE	DNRNG_NLGRP_NONE
+	DNRNG_NLGRP_L1,
+#define DNRNG_NLGRP_L1		DNRNG_NLGRP_L1
+	DNRNG_NLGRP_L2,
+#define DNRNG_NLGRP_L2		DNRNG_NLGRP_L2
+	__DNRNG_NLGRP_MAX
+};
+#define DNRNG_NLGRP_MAX	(__DNRNG_NLGRP_MAX - 1)
+
+#endif /*__LINUX_DECNET_NETFILTER_H*/
diff --git a/include/linux/netfilter_ipv4.h b/include/linux/netfilter_ipv4.h
new file mode 100644
index 00000000..fa0946c5
--- /dev/null
+++ b/include/linux/netfilter_ipv4.h
@@ -0,0 +1,86 @@
+#ifndef __LINUX_IP_NETFILTER_H
+#define __LINUX_IP_NETFILTER_H
+
+/* IPv4-specific defines for netfilter. 
+ * (C)1998 Rusty Russell -- This code is GPL.
+ */
+
+#include <linux/netfilter.h>
+
+/* only for userspace compatibility */
+#ifndef __KERNEL__
+
+#include <limits.h> /* for INT_MIN, INT_MAX */
+
+/* IP Cache bits. */
+/* Src IP address. */
+#define NFC_IP_SRC		0x0001
+/* Dest IP address. */
+#define NFC_IP_DST		0x0002
+/* Input device. */
+#define NFC_IP_IF_IN		0x0004
+/* Output device. */
+#define NFC_IP_IF_OUT		0x0008
+/* TOS. */
+#define NFC_IP_TOS		0x0010
+/* Protocol. */
+#define NFC_IP_PROTO		0x0020
+/* IP options. */
+#define NFC_IP_OPTIONS		0x0040
+/* Frag & flags. */
+#define NFC_IP_FRAG		0x0080
+
+/* Per-protocol information: only matters if proto match. */
+/* TCP flags. */
+#define NFC_IP_TCPFLAGS		0x0100
+/* Source port. */
+#define NFC_IP_SRC_PT		0x0200
+/* Dest port. */
+#define NFC_IP_DST_PT		0x0400
+/* Something else about the proto */
+#define NFC_IP_PROTO_UNKNOWN	0x2000
+
+/* IP Hooks */
+/* After promisc drops, checksum checks. */
+#define NF_IP_PRE_ROUTING	0
+/* If the packet is destined for this box. */
+#define NF_IP_LOCAL_IN		1
+/* If the packet is destined for another interface. */
+#define NF_IP_FORWARD		2
+/* Packets coming from a local process. */
+#define NF_IP_LOCAL_OUT		3
+/* Packets about to hit the wire. */
+#define NF_IP_POST_ROUTING	4
+#define NF_IP_NUMHOOKS		5
+#endif /* ! __KERNEL__ */
+
+enum nf_ip_hook_priorities {
+	NF_IP_PRI_FIRST = INT_MIN,
+	NF_IP_PRI_CONNTRACK_DEFRAG = -400,
+	NF_IP_PRI_RAW = -300,
+	NF_IP_PRI_SELINUX_FIRST = -225,
+	NF_IP_PRI_CONNTRACK = -200,
+	NF_IP_PRI_MANGLE = -150,
+	NF_IP_PRI_NAT_DST = -100,
+	NF_IP_PRI_FILTER = 0,
+	NF_IP_PRI_SECURITY = 50,
+	NF_IP_PRI_NAT_SRC = 100,
+	NF_IP_PRI_SELINUX_LAST = 225,
+	NF_IP_PRI_CONNTRACK_CONFIRM = INT_MAX,
+	NF_IP_PRI_LAST = INT_MAX,
+};
+
+/* Arguments for setsockopt SOL_IP: */
+/* 2.0 firewalling went from 64 through 71 (and +256, +512, etc). */
+/* 2.2 firewalling (+ masq) went from 64 through 76 */
+/* 2.4 firewalling went 64 through 67. */
+#define SO_ORIGINAL_DST 80
+
+#ifdef __KERNEL__
+extern int ip_route_me_harder(struct sk_buff *skb, unsigned addr_type);
+extern int ip_xfrm_me_harder(struct sk_buff *skb);
+extern __sum16 nf_ip_checksum(struct sk_buff *skb, unsigned int hook,
+				   unsigned int dataoff, u_int8_t protocol);
+#endif /*__KERNEL__*/
+
+#endif /*__LINUX_IP_NETFILTER_H*/
diff --git a/include/linux/netfilter_ipv4/Kbuild b/include/linux/netfilter_ipv4/Kbuild
new file mode 100644
index 00000000..31f8bec9
--- /dev/null
+++ b/include/linux/netfilter_ipv4/Kbuild
@@ -0,0 +1,12 @@
+header-y += ip_queue.h
+header-y += ip_tables.h
+header-y += ipt_CLUSTERIP.h
+header-y += ipt_ECN.h
+header-y += ipt_LOG.h
+header-y += ipt_REJECT.h
+header-y += ipt_TTL.h
+header-y += ipt_ULOG.h
+header-y += ipt_addrtype.h
+header-y += ipt_ah.h
+header-y += ipt_ecn.h
+header-y += ipt_ttl.h
diff --git a/include/linux/netfilter_ipv4/ip_queue.h b/include/linux/netfilter_ipv4/ip_queue.h
new file mode 100644
index 00000000..a03507f4
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ip_queue.h
@@ -0,0 +1,72 @@
+/*
+ * This is a module which is used for queueing IPv4 packets and
+ * communicating with userspace via netlink.
+ *
+ * (C) 2000 James Morris, this code is GPL.
+ */
+#ifndef _IP_QUEUE_H
+#define _IP_QUEUE_H
+
+#ifdef __KERNEL__
+#ifdef DEBUG_IPQ
+#define QDEBUG(x...) printk(KERN_DEBUG ## x)
+#else
+#define QDEBUG(x...)
+#endif  /* DEBUG_IPQ */
+#else
+#include <net/if.h>
+#endif	/* ! __KERNEL__ */
+
+/* Messages sent from kernel */
+typedef struct ipq_packet_msg {
+	unsigned long packet_id;	/* ID of queued packet */
+	unsigned long mark;		/* Netfilter mark value */
+	long timestamp_sec;		/* Packet arrival time (seconds) */
+	long timestamp_usec;		/* Packet arrvial time (+useconds) */
+	unsigned int hook;		/* Netfilter hook we rode in on */
+	char indev_name[IFNAMSIZ];	/* Name of incoming interface */
+	char outdev_name[IFNAMSIZ];	/* Name of outgoing interface */
+	__be16 hw_protocol;		/* Hardware protocol (network order) */
+	unsigned short hw_type;		/* Hardware type */
+	unsigned char hw_addrlen;	/* Hardware address length */
+	unsigned char hw_addr[8];	/* Hardware address */
+	size_t data_len;		/* Length of packet data */
+	unsigned char payload[0];	/* Optional packet data */
+} ipq_packet_msg_t;
+
+/* Messages sent from userspace */
+typedef struct ipq_mode_msg {
+	unsigned char value;		/* Requested mode */
+	size_t range;			/* Optional range of packet requested */
+} ipq_mode_msg_t;
+
+typedef struct ipq_verdict_msg {
+	unsigned int value;		/* Verdict to hand to netfilter */
+	unsigned long id;		/* Packet ID for this verdict */
+	size_t data_len;		/* Length of replacement data */
+	unsigned char payload[0];	/* Optional replacement packet */
+} ipq_verdict_msg_t;
+
+typedef struct ipq_peer_msg {
+	union {
+		ipq_verdict_msg_t verdict;
+		ipq_mode_msg_t mode;
+	} msg;
+} ipq_peer_msg_t;
+
+/* Packet delivery modes */
+enum {
+	IPQ_COPY_NONE,		/* Initial mode, packets are dropped */
+	IPQ_COPY_META,		/* Copy metadata */
+	IPQ_COPY_PACKET		/* Copy metadata + packet (range) */
+};
+#define IPQ_COPY_MAX IPQ_COPY_PACKET
+
+/* Types of messages */
+#define IPQM_BASE	0x10	/* standard netlink messages below this */
+#define IPQM_MODE	(IPQM_BASE + 1)		/* Mode request from peer */
+#define IPQM_VERDICT	(IPQM_BASE + 2)		/* Verdict from peer */ 
+#define IPQM_PACKET	(IPQM_BASE + 3)		/* Packet from kernel */
+#define IPQM_MAX	(IPQM_BASE + 4)
+
+#endif /*_IP_QUEUE_H*/
diff --git a/include/linux/netfilter_ipv4/ip_tables.h b/include/linux/netfilter_ipv4/ip_tables.h
new file mode 100644
index 00000000..db792319
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ip_tables.h
@@ -0,0 +1,307 @@
+/*
+ * 25-Jul-1998 Major changes to allow for ip chain table
+ *
+ * 3-Jan-2000 Named tables to allow packet selection for different uses.
+ */
+
+/*
+ * 	Format of an IP firewall descriptor
+ *
+ * 	src, dst, src_mask, dst_mask are always stored in network byte order.
+ * 	flags are stored in host byte order (of course).
+ * 	Port numbers are stored in HOST byte order.
+ */
+
+#ifndef _IPTABLES_H
+#define _IPTABLES_H
+
+#ifdef __KERNEL__
+#include <linux/if.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/skbuff.h>
+#endif
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/netfilter_ipv4.h>
+
+#include <linux/netfilter/x_tables.h>
+
+#ifndef __KERNEL__
+#define IPT_FUNCTION_MAXNAMELEN XT_FUNCTION_MAXNAMELEN
+#define IPT_TABLE_MAXNAMELEN XT_TABLE_MAXNAMELEN
+#define ipt_match xt_match
+#define ipt_target xt_target
+#define ipt_table xt_table
+#define ipt_get_revision xt_get_revision
+#define ipt_entry_match xt_entry_match
+#define ipt_entry_target xt_entry_target
+#define ipt_standard_target xt_standard_target
+#define ipt_error_target xt_error_target
+#define ipt_counters xt_counters
+#define IPT_CONTINUE XT_CONTINUE
+#define IPT_RETURN XT_RETURN
+
+/* This group is older than old (iptables < v1.4.0-rc1~89) */
+#include <linux/netfilter/xt_tcpudp.h>
+#define ipt_udp xt_udp
+#define ipt_tcp xt_tcp
+#define IPT_TCP_INV_SRCPT	XT_TCP_INV_SRCPT
+#define IPT_TCP_INV_DSTPT	XT_TCP_INV_DSTPT
+#define IPT_TCP_INV_FLAGS	XT_TCP_INV_FLAGS
+#define IPT_TCP_INV_OPTION	XT_TCP_INV_OPTION
+#define IPT_TCP_INV_MASK	XT_TCP_INV_MASK
+#define IPT_UDP_INV_SRCPT	XT_UDP_INV_SRCPT
+#define IPT_UDP_INV_DSTPT	XT_UDP_INV_DSTPT
+#define IPT_UDP_INV_MASK	XT_UDP_INV_MASK
+
+/* The argument to IPT_SO_ADD_COUNTERS. */
+#define ipt_counters_info xt_counters_info
+/* Standard return verdict, or do jump. */
+#define IPT_STANDARD_TARGET XT_STANDARD_TARGET
+/* Error verdict. */
+#define IPT_ERROR_TARGET XT_ERROR_TARGET
+
+/* fn returns 0 to continue iteration */
+#define IPT_MATCH_ITERATE(e, fn, args...) \
+	XT_MATCH_ITERATE(struct ipt_entry, e, fn, ## args)
+
+/* fn returns 0 to continue iteration */
+#define IPT_ENTRY_ITERATE(entries, size, fn, args...) \
+	XT_ENTRY_ITERATE(struct ipt_entry, entries, size, fn, ## args)
+#endif
+
+/* Yes, Virginia, you have to zero the padding. */
+struct ipt_ip {
+	/* Source and destination IP addr */
+	struct in_addr src, dst;
+	/* Mask for src and dest IP addr */
+	struct in_addr smsk, dmsk;
+	char iniface[IFNAMSIZ], outiface[IFNAMSIZ];
+	unsigned char iniface_mask[IFNAMSIZ], outiface_mask[IFNAMSIZ];
+
+	/* Protocol, 0 = ANY */
+	__u16 proto;
+
+	/* Flags word */
+	__u8 flags;
+	/* Inverse flags */
+	__u8 invflags;
+};
+
+/* Values for "flag" field in struct ipt_ip (general ip structure). */
+#define IPT_F_FRAG		0x01	/* Set if rule is a fragment rule */
+#define IPT_F_GOTO		0x02	/* Set if jump is a goto */
+#define IPT_F_MASK		0x03	/* All possible flag bits mask. */
+
+/* Values for "inv" field in struct ipt_ip. */
+#define IPT_INV_VIA_IN		0x01	/* Invert the sense of IN IFACE. */
+#define IPT_INV_VIA_OUT		0x02	/* Invert the sense of OUT IFACE */
+#define IPT_INV_TOS		0x04	/* Invert the sense of TOS. */
+#define IPT_INV_SRCIP		0x08	/* Invert the sense of SRC IP. */
+#define IPT_INV_DSTIP		0x10	/* Invert the sense of DST OP. */
+#define IPT_INV_FRAG		0x20	/* Invert the sense of FRAG. */
+#define IPT_INV_PROTO		XT_INV_PROTO
+#define IPT_INV_MASK		0x7F	/* All possible flag bits mask. */
+
+/* This structure defines each of the firewall rules.  Consists of 3
+   parts which are 1) general IP header stuff 2) match specific
+   stuff 3) the target to perform if the rule matches */
+struct ipt_entry {
+	struct ipt_ip ip;
+
+	/* Mark with fields that we care about. */
+	unsigned int nfcache;
+
+	/* Size of ipt_entry + matches */
+	__u16 target_offset;
+	/* Size of ipt_entry + matches + target */
+	__u16 next_offset;
+
+	/* Back pointer */
+	unsigned int comefrom;
+
+	/* Packet and byte counters. */
+	struct xt_counters counters;
+
+	/* The matches (if any), then the target. */
+	unsigned char elems[0];
+};
+
+/*
+ * New IP firewall options for [gs]etsockopt at the RAW IP level.
+ * Unlike BSD Linux inherits IP options so you don't have to use a raw
+ * socket for this. Instead we check rights in the calls.
+ *
+ * ATTENTION: check linux/in.h before adding new number here.
+ */
+#define IPT_BASE_CTL		64
+
+#define IPT_SO_SET_REPLACE	(IPT_BASE_CTL)
+#define IPT_SO_SET_ADD_COUNTERS	(IPT_BASE_CTL + 1)
+#define IPT_SO_SET_MAX		IPT_SO_SET_ADD_COUNTERS
+
+#define IPT_SO_GET_INFO			(IPT_BASE_CTL)
+#define IPT_SO_GET_ENTRIES		(IPT_BASE_CTL + 1)
+#define IPT_SO_GET_REVISION_MATCH	(IPT_BASE_CTL + 2)
+#define IPT_SO_GET_REVISION_TARGET	(IPT_BASE_CTL + 3)
+#define IPT_SO_GET_MAX			IPT_SO_GET_REVISION_TARGET
+
+/* ICMP matching stuff */
+struct ipt_icmp {
+	__u8 type;				/* type to match */
+	__u8 code[2];				/* range of code */
+	__u8 invflags;				/* Inverse flags */
+};
+
+/* Values for "inv" field for struct ipt_icmp. */
+#define IPT_ICMP_INV	0x01	/* Invert the sense of type/code test */
+
+/* The argument to IPT_SO_GET_INFO */
+struct ipt_getinfo {
+	/* Which table: caller fills this in. */
+	char name[XT_TABLE_MAXNAMELEN];
+
+	/* Kernel fills these in. */
+	/* Which hook entry points are valid: bitmask */
+	unsigned int valid_hooks;
+
+	/* Hook entry points: one per netfilter hook. */
+	unsigned int hook_entry[NF_INET_NUMHOOKS];
+
+	/* Underflow points. */
+	unsigned int underflow[NF_INET_NUMHOOKS];
+
+	/* Number of entries */
+	unsigned int num_entries;
+
+	/* Size of entries. */
+	unsigned int size;
+};
+
+/* The argument to IPT_SO_SET_REPLACE. */
+struct ipt_replace {
+	/* Which table. */
+	char name[XT_TABLE_MAXNAMELEN];
+
+	/* Which hook entry points are valid: bitmask.  You can't
+           change this. */
+	unsigned int valid_hooks;
+
+	/* Number of entries */
+	unsigned int num_entries;
+
+	/* Total size of new entries */
+	unsigned int size;
+
+	/* Hook entry points. */
+	unsigned int hook_entry[NF_INET_NUMHOOKS];
+
+	/* Underflow points. */
+	unsigned int underflow[NF_INET_NUMHOOKS];
+
+	/* Information about old entries: */
+	/* Number of counters (must be equal to current number of entries). */
+	unsigned int num_counters;
+	/* The old entries' counters. */
+	struct xt_counters __user *counters;
+
+	/* The entries (hang off end: not really an array). */
+	struct ipt_entry entries[0];
+};
+
+/* The argument to IPT_SO_GET_ENTRIES. */
+struct ipt_get_entries {
+	/* Which table: user fills this in. */
+	char name[XT_TABLE_MAXNAMELEN];
+
+	/* User fills this in: total entry size. */
+	unsigned int size;
+
+	/* The entries. */
+	struct ipt_entry entrytable[0];
+};
+
+/* Helper functions */
+static __inline__ struct xt_entry_target *
+ipt_get_target(struct ipt_entry *e)
+{
+	return (void *)e + e->target_offset;
+}
+
+/*
+ *	Main firewall chains definitions and global var's definitions.
+ */
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+extern void ipt_init(void) __init;
+
+extern struct xt_table *ipt_register_table(struct net *net,
+					   const struct xt_table *table,
+					   const struct ipt_replace *repl);
+extern void ipt_unregister_table(struct net *net, struct xt_table *table);
+
+/* Standard entry. */
+struct ipt_standard {
+	struct ipt_entry entry;
+	struct xt_standard_target target;
+};
+
+struct ipt_error {
+	struct ipt_entry entry;
+	struct xt_error_target target;
+};
+
+#define IPT_ENTRY_INIT(__size)						       \
+{									       \
+	.target_offset	= sizeof(struct ipt_entry),			       \
+	.next_offset	= (__size),					       \
+}
+
+#define IPT_STANDARD_INIT(__verdict)					       \
+{									       \
+	.entry		= IPT_ENTRY_INIT(sizeof(struct ipt_standard)),	       \
+	.target		= XT_TARGET_INIT(XT_STANDARD_TARGET,		       \
+					 sizeof(struct xt_standard_target)),   \
+	.target.verdict	= -(__verdict) - 1,				       \
+}
+
+#define IPT_ERROR_INIT							       \
+{									       \
+	.entry		= IPT_ENTRY_INIT(sizeof(struct ipt_error)),	       \
+	.target		= XT_TARGET_INIT(XT_ERROR_TARGET,		       \
+					 sizeof(struct xt_error_target)),      \
+	.target.errorname = "ERROR",					       \
+}
+
+extern void *ipt_alloc_initial_table(const struct xt_table *);
+extern unsigned int ipt_do_table(struct sk_buff *skb,
+				 unsigned int hook,
+				 const struct net_device *in,
+				 const struct net_device *out,
+				 struct xt_table *table);
+
+#ifdef CONFIG_COMPAT
+#include <net/compat.h>
+
+struct compat_ipt_entry {
+	struct ipt_ip ip;
+	compat_uint_t nfcache;
+	__u16 target_offset;
+	__u16 next_offset;
+	compat_uint_t comefrom;
+	struct compat_xt_counters counters;
+	unsigned char elems[0];
+};
+
+/* Helper functions */
+static inline struct xt_entry_target *
+compat_ipt_get_target(struct compat_ipt_entry *e)
+{
+	return (void *)e + e->target_offset;
+}
+
+#endif /* CONFIG_COMPAT */
+#endif /*__KERNEL__*/
+#endif /* _IPTABLES_H */
diff --git a/include/linux/netfilter_ipv4/ipt_CLUSTERIP.h b/include/linux/netfilter_ipv4/ipt_CLUSTERIP.h
new file mode 100644
index 00000000..c6a204c9
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_CLUSTERIP.h
@@ -0,0 +1,36 @@
+#ifndef _IPT_CLUSTERIP_H_target
+#define _IPT_CLUSTERIP_H_target
+
+#include <linux/types.h>
+
+enum clusterip_hashmode {
+    CLUSTERIP_HASHMODE_SIP = 0,
+    CLUSTERIP_HASHMODE_SIP_SPT,
+    CLUSTERIP_HASHMODE_SIP_SPT_DPT,
+};
+
+#define CLUSTERIP_HASHMODE_MAX CLUSTERIP_HASHMODE_SIP_SPT_DPT
+
+#define CLUSTERIP_MAX_NODES 16
+
+#define CLUSTERIP_FLAG_NEW 0x00000001
+
+struct clusterip_config;
+
+struct ipt_clusterip_tgt_info {
+
+	__u32 flags;
+
+	/* only relevant for new ones */
+	__u8 clustermac[6];
+	__u16 num_total_nodes;
+	__u16 num_local_nodes;
+	__u16 local_nodes[CLUSTERIP_MAX_NODES];
+	__u32 hash_mode;
+	__u32 hash_initval;
+
+	/* Used internally by the kernel */
+	struct clusterip_config *config;
+};
+
+#endif /*_IPT_CLUSTERIP_H_target*/
diff --git a/include/linux/netfilter_ipv4/ipt_ECN.h b/include/linux/netfilter_ipv4/ipt_ECN.h
new file mode 100644
index 00000000..bb88d531
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_ECN.h
@@ -0,0 +1,33 @@
+/* Header file for iptables ipt_ECN target
+ *
+ * (C) 2002 by Harald Welte <laforge@gnumonks.org>
+ *
+ * This software is distributed under GNU GPL v2, 1991
+ * 
+ * ipt_ECN.h,v 1.3 2002/05/29 12:17:40 laforge Exp
+*/
+#ifndef _IPT_ECN_TARGET_H
+#define _IPT_ECN_TARGET_H
+
+#include <linux/types.h>
+#include <linux/netfilter/xt_DSCP.h>
+
+#define IPT_ECN_IP_MASK	(~XT_DSCP_MASK)
+
+#define IPT_ECN_OP_SET_IP	0x01	/* set ECN bits of IPv4 header */
+#define IPT_ECN_OP_SET_ECE	0x10	/* set ECE bit of TCP header */
+#define IPT_ECN_OP_SET_CWR	0x20	/* set CWR bit of TCP header */
+
+#define IPT_ECN_OP_MASK		0xce
+
+struct ipt_ECN_info {
+	__u8 operation;	/* bitset of operations */
+	__u8 ip_ect;	/* ECT codepoint of IPv4 header, pre-shifted */
+	union {
+		struct {
+			__u8 ece:1, cwr:1; /* TCP ECT bits */
+		} tcp;
+	} proto;
+};
+
+#endif /* _IPT_ECN_TARGET_H */
diff --git a/include/linux/netfilter_ipv4/ipt_LOG.h b/include/linux/netfilter_ipv4/ipt_LOG.h
new file mode 100644
index 00000000..5d815207
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_LOG.h
@@ -0,0 +1,21 @@
+#ifndef _IPT_LOG_H
+#define _IPT_LOG_H
+
+#warning "Please update iptables, this file will be removed soon!"
+
+/* make sure not to change this without changing netfilter.h:NF_LOG_* (!) */
+#define IPT_LOG_TCPSEQ		0x01	/* Log TCP sequence numbers */
+#define IPT_LOG_TCPOPT		0x02	/* Log TCP options */
+#define IPT_LOG_IPOPT		0x04	/* Log IP options */
+#define IPT_LOG_UID		0x08	/* Log UID owning local socket */
+#define IPT_LOG_NFLOG		0x10	/* Unsupported, don't reuse */
+#define IPT_LOG_MACDECODE	0x20	/* Decode MAC header */
+#define IPT_LOG_MASK		0x2f
+
+struct ipt_log_info {
+	unsigned char level;
+	unsigned char logflags;
+	char prefix[30];
+};
+
+#endif /*_IPT_LOG_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_REJECT.h b/include/linux/netfilter_ipv4/ipt_REJECT.h
new file mode 100644
index 00000000..4293a1ad
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_REJECT.h
@@ -0,0 +1,20 @@
+#ifndef _IPT_REJECT_H
+#define _IPT_REJECT_H
+
+enum ipt_reject_with {
+	IPT_ICMP_NET_UNREACHABLE,
+	IPT_ICMP_HOST_UNREACHABLE,
+	IPT_ICMP_PROT_UNREACHABLE,
+	IPT_ICMP_PORT_UNREACHABLE,
+	IPT_ICMP_ECHOREPLY,
+	IPT_ICMP_NET_PROHIBITED,
+	IPT_ICMP_HOST_PROHIBITED,
+	IPT_TCP_RESET,
+	IPT_ICMP_ADMIN_PROHIBITED
+};
+
+struct ipt_reject_info {
+	enum ipt_reject_with with;      /* reject type */
+};
+
+#endif /*_IPT_REJECT_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_TTL.h b/include/linux/netfilter_ipv4/ipt_TTL.h
new file mode 100644
index 00000000..f6ac169d
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_TTL.h
@@ -0,0 +1,23 @@
+/* TTL modification module for IP tables
+ * (C) 2000 by Harald Welte <laforge@netfilter.org> */
+
+#ifndef _IPT_TTL_H
+#define _IPT_TTL_H
+
+#include <linux/types.h>
+
+enum {
+	IPT_TTL_SET = 0,
+	IPT_TTL_INC,
+	IPT_TTL_DEC
+};
+
+#define IPT_TTL_MAXMODE	IPT_TTL_DEC
+
+struct ipt_TTL_info {
+	__u8	mode;
+	__u8	ttl;
+};
+
+
+#endif
diff --git a/include/linux/netfilter_ipv4/ipt_ULOG.h b/include/linux/netfilter_ipv4/ipt_ULOG.h
new file mode 100644
index 00000000..417aad28
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_ULOG.h
@@ -0,0 +1,49 @@
+/* Header file for IP tables userspace logging, Version 1.8
+ *
+ * (C) 2000-2002 by Harald Welte <laforge@gnumonks.org>
+ * 
+ * Distributed under the terms of GNU GPL */
+
+#ifndef _IPT_ULOG_H
+#define _IPT_ULOG_H
+
+#ifndef NETLINK_NFLOG
+#define NETLINK_NFLOG 	5
+#endif
+
+#define ULOG_DEFAULT_NLGROUP	1
+#define ULOG_DEFAULT_QTHRESHOLD	1
+
+#define ULOG_MAC_LEN	80
+#define ULOG_PREFIX_LEN	32
+
+#define ULOG_MAX_QLEN	50
+/* Why 50? Well... there is a limit imposed by the slab cache 131000
+ * bytes. So the multipart netlink-message has to be < 131000 bytes.
+ * Assuming a standard ethernet-mtu of 1500, we could define this up
+ * to 80... but even 50 seems to be big enough. */
+
+/* private data structure for each rule with a ULOG target */
+struct ipt_ulog_info {
+	unsigned int nl_group;
+	size_t copy_range;
+	size_t qthreshold;
+	char prefix[ULOG_PREFIX_LEN];
+};
+
+/* Format of the ULOG packets passed through netlink */
+typedef struct ulog_packet_msg {
+	unsigned long mark;
+	long timestamp_sec;
+	long timestamp_usec;
+	unsigned int hook;
+	char indev_name[IFNAMSIZ];
+	char outdev_name[IFNAMSIZ];
+	size_t data_len;
+	char prefix[ULOG_PREFIX_LEN];
+	unsigned char mac_len;
+	unsigned char mac[ULOG_MAC_LEN];
+	unsigned char payload[0];
+} ulog_packet_msg_t;
+
+#endif /*_IPT_ULOG_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_addrtype.h b/include/linux/netfilter_ipv4/ipt_addrtype.h
new file mode 100644
index 00000000..0da42237
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_addrtype.h
@@ -0,0 +1,27 @@
+#ifndef _IPT_ADDRTYPE_H
+#define _IPT_ADDRTYPE_H
+
+#include <linux/types.h>
+
+enum {
+	IPT_ADDRTYPE_INVERT_SOURCE	= 0x0001,
+	IPT_ADDRTYPE_INVERT_DEST	= 0x0002,
+	IPT_ADDRTYPE_LIMIT_IFACE_IN	= 0x0004,
+	IPT_ADDRTYPE_LIMIT_IFACE_OUT	= 0x0008,
+};
+
+struct ipt_addrtype_info_v1 {
+	__u16	source;		/* source-type mask */
+	__u16	dest;		/* dest-type mask */
+	__u32	flags;
+};
+
+/* revision 0 */
+struct ipt_addrtype_info {
+	__u16	source;		/* source-type mask */
+	__u16	dest;		/* dest-type mask */
+	__u32	invert_source;
+	__u32	invert_dest;
+};
+
+#endif
diff --git a/include/linux/netfilter_ipv4/ipt_ah.h b/include/linux/netfilter_ipv4/ipt_ah.h
new file mode 100644
index 00000000..4e02bb01
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_ah.h
@@ -0,0 +1,17 @@
+#ifndef _IPT_AH_H
+#define _IPT_AH_H
+
+#include <linux/types.h>
+
+struct ipt_ah {
+	__u32 spis[2];			/* Security Parameter Index */
+	__u8  invflags;			/* Inverse flags */
+};
+
+
+
+/* Values for "invflags" field in struct ipt_ah. */
+#define IPT_AH_INV_SPI		0x01	/* Invert the sense of spi. */
+#define IPT_AH_INV_MASK	0x01	/* All possible flags. */
+
+#endif /*_IPT_AH_H*/
diff --git a/include/linux/netfilter_ipv4/ipt_ecn.h b/include/linux/netfilter_ipv4/ipt_ecn.h
new file mode 100644
index 00000000..0e0c063d
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_ecn.h
@@ -0,0 +1,15 @@
+#ifndef _IPT_ECN_H
+#define _IPT_ECN_H
+
+#include <linux/netfilter/xt_ecn.h>
+#define ipt_ecn_info xt_ecn_info
+
+enum {
+	IPT_ECN_IP_MASK       = XT_ECN_IP_MASK,
+	IPT_ECN_OP_MATCH_IP   = XT_ECN_OP_MATCH_IP,
+	IPT_ECN_OP_MATCH_ECE  = XT_ECN_OP_MATCH_ECE,
+	IPT_ECN_OP_MATCH_CWR  = XT_ECN_OP_MATCH_CWR,
+	IPT_ECN_OP_MATCH_MASK = XT_ECN_OP_MATCH_MASK,
+};
+
+#endif /* IPT_ECN_H */
diff --git a/include/linux/netfilter_ipv4/ipt_ttl.h b/include/linux/netfilter_ipv4/ipt_ttl.h
new file mode 100644
index 00000000..37bee444
--- /dev/null
+++ b/include/linux/netfilter_ipv4/ipt_ttl.h
@@ -0,0 +1,23 @@
+/* IP tables module for matching the value of the TTL
+ * (C) 2000 by Harald Welte <laforge@gnumonks.org> */
+
+#ifndef _IPT_TTL_H
+#define _IPT_TTL_H
+
+#include <linux/types.h>
+
+enum {
+	IPT_TTL_EQ = 0,		/* equals */
+	IPT_TTL_NE,		/* not equals */
+	IPT_TTL_LT,		/* less than */
+	IPT_TTL_GT,		/* greater than */
+};
+
+
+struct ipt_ttl_info {
+	__u8	mode;
+	__u8	ttl;
+};
+
+
+#endif
diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h
new file mode 100644
index 00000000..57c02512
--- /dev/null
+++ b/include/linux/netfilter_ipv6.h
@@ -0,0 +1,93 @@
+#ifndef __LINUX_IP6_NETFILTER_H
+#define __LINUX_IP6_NETFILTER_H
+
+/* IPv6-specific defines for netfilter. 
+ * (C)1998 Rusty Russell -- This code is GPL.
+ * (C)1999 David Jeffery
+ *   this header was blatantly ripped from netfilter_ipv4.h 
+ *   it's amazing what adding a bunch of 6s can do =8^)
+ */
+
+#include <linux/netfilter.h>
+
+/* only for userspace compatibility */
+#ifndef __KERNEL__
+
+#include <limits.h> /* for INT_MIN, INT_MAX */
+
+/* IP Cache bits. */
+/* Src IP address. */
+#define NFC_IP6_SRC              0x0001
+/* Dest IP address. */
+#define NFC_IP6_DST              0x0002
+/* Input device. */
+#define NFC_IP6_IF_IN            0x0004
+/* Output device. */
+#define NFC_IP6_IF_OUT           0x0008
+/* TOS. */
+#define NFC_IP6_TOS              0x0010
+/* Protocol. */
+#define NFC_IP6_PROTO            0x0020
+/* IP options. */
+#define NFC_IP6_OPTIONS          0x0040
+/* Frag & flags. */
+#define NFC_IP6_FRAG             0x0080
+
+
+/* Per-protocol information: only matters if proto match. */
+/* TCP flags. */
+#define NFC_IP6_TCPFLAGS         0x0100
+/* Source port. */
+#define NFC_IP6_SRC_PT           0x0200
+/* Dest port. */
+#define NFC_IP6_DST_PT           0x0400
+/* Something else about the proto */
+#define NFC_IP6_PROTO_UNKNOWN    0x2000
+
+/* IP6 Hooks */
+/* After promisc drops, checksum checks. */
+#define NF_IP6_PRE_ROUTING	0
+/* If the packet is destined for this box. */
+#define NF_IP6_LOCAL_IN		1
+/* If the packet is destined for another interface. */
+#define NF_IP6_FORWARD		2
+/* Packets coming from a local process. */
+#define NF_IP6_LOCAL_OUT		3
+/* Packets about to hit the wire. */
+#define NF_IP6_POST_ROUTING	4
+#define NF_IP6_NUMHOOKS		5
+#endif /* ! __KERNEL__ */
+
+
+enum nf_ip6_hook_priorities {
+	NF_IP6_PRI_FIRST = INT_MIN,
+	NF_IP6_PRI_CONNTRACK_DEFRAG = -400,
+	NF_IP6_PRI_RAW = -300,
+	NF_IP6_PRI_SELINUX_FIRST = -225,
+	NF_IP6_PRI_CONNTRACK = -200,
+	NF_IP6_PRI_MANGLE = -150,
+	NF_IP6_PRI_NAT_DST = -100,
+	NF_IP6_PRI_FILTER = 0,
+	NF_IP6_PRI_SECURITY = 50,
+	NF_IP6_PRI_NAT_SRC = 100,
+	NF_IP6_PRI_SELINUX_LAST = 225,
+	NF_IP6_PRI_LAST = INT_MAX,
+};
+
+#ifdef  __KERNEL__
+
+#ifdef CONFIG_NETFILTER
+extern int ip6_route_me_harder(struct sk_buff *skb);
+extern __sum16 nf_ip6_checksum(struct sk_buff *skb, unsigned int hook,
+				    unsigned int dataoff, u_int8_t protocol);
+
+extern int ipv6_netfilter_init(void);
+extern void ipv6_netfilter_fini(void);
+#else /* CONFIG_NETFILTER */
+static inline int ipv6_netfilter_init(void) { return 0; }
+static inline void ipv6_netfilter_fini(void) { return; }
+#endif /* CONFIG_NETFILTER */
+
+#endif /* __KERNEL__ */
+
+#endif /*__LINUX_IP6_NETFILTER_H*/
diff --git a/include/linux/netfilter_ipv6/Kbuild b/include/linux/netfilter_ipv6/Kbuild
new file mode 100644
index 00000000..bd095bc0
--- /dev/null
+++ b/include/linux/netfilter_ipv6/Kbuild
@@ -0,0 +1,11 @@
+header-y += ip6_tables.h
+header-y += ip6t_HL.h
+header-y += ip6t_LOG.h
+header-y += ip6t_REJECT.h
+header-y += ip6t_ah.h
+header-y += ip6t_frag.h
+header-y += ip6t_hl.h
+header-y += ip6t_ipv6header.h
+header-y += ip6t_mh.h
+header-y += ip6t_opts.h
+header-y += ip6t_rt.h
diff --git a/include/linux/netfilter_ipv6/ip6_tables.h b/include/linux/netfilter_ipv6/ip6_tables.h
new file mode 100644
index 00000000..1bc898b1
--- /dev/null
+++ b/include/linux/netfilter_ipv6/ip6_tables.h
@@ -0,0 +1,326 @@
+/*
+ * 25-Jul-1998 Major changes to allow for ip chain table
+ *
+ * 3-Jan-2000 Named tables to allow packet selection for different uses.
+ */
+
+/*
+ * 	Format of an IP6 firewall descriptor
+ *
+ * 	src, dst, src_mask, dst_mask are always stored in network byte order.
+ * 	flags are stored in host byte order (of course).
+ * 	Port numbers are stored in HOST byte order.
+ */
+
+#ifndef _IP6_TABLES_H
+#define _IP6_TABLES_H
+
+#ifdef __KERNEL__
+#include <linux/if.h>
+#include <linux/in6.h>
+#include <linux/ipv6.h>
+#include <linux/skbuff.h>
+#endif
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/netfilter_ipv6.h>
+
+#include <linux/netfilter/x_tables.h>
+
+#ifndef __KERNEL__
+#define IP6T_FUNCTION_MAXNAMELEN XT_FUNCTION_MAXNAMELEN
+#define IP6T_TABLE_MAXNAMELEN XT_TABLE_MAXNAMELEN
+#define ip6t_match xt_match
+#define ip6t_target xt_target
+#define ip6t_table xt_table
+#define ip6t_get_revision xt_get_revision
+#define ip6t_entry_match xt_entry_match
+#define ip6t_entry_target xt_entry_target
+#define ip6t_standard_target xt_standard_target
+#define ip6t_error_target xt_error_target
+#define ip6t_counters xt_counters
+#define IP6T_CONTINUE XT_CONTINUE
+#define IP6T_RETURN XT_RETURN
+
+/* Pre-iptables-1.4.0 */
+#include <linux/netfilter/xt_tcpudp.h>
+#define ip6t_tcp xt_tcp
+#define ip6t_udp xt_udp
+#define IP6T_TCP_INV_SRCPT	XT_TCP_INV_SRCPT
+#define IP6T_TCP_INV_DSTPT	XT_TCP_INV_DSTPT
+#define IP6T_TCP_INV_FLAGS	XT_TCP_INV_FLAGS
+#define IP6T_TCP_INV_OPTION	XT_TCP_INV_OPTION
+#define IP6T_TCP_INV_MASK	XT_TCP_INV_MASK
+#define IP6T_UDP_INV_SRCPT	XT_UDP_INV_SRCPT
+#define IP6T_UDP_INV_DSTPT	XT_UDP_INV_DSTPT
+#define IP6T_UDP_INV_MASK	XT_UDP_INV_MASK
+
+#define ip6t_counters_info xt_counters_info
+#define IP6T_STANDARD_TARGET XT_STANDARD_TARGET
+#define IP6T_ERROR_TARGET XT_ERROR_TARGET
+#define IP6T_MATCH_ITERATE(e, fn, args...) \
+	XT_MATCH_ITERATE(struct ip6t_entry, e, fn, ## args)
+#define IP6T_ENTRY_ITERATE(entries, size, fn, args...) \
+	XT_ENTRY_ITERATE(struct ip6t_entry, entries, size, fn, ## args)
+#endif
+
+/* Yes, Virginia, you have to zero the padding. */
+struct ip6t_ip6 {
+	/* Source and destination IP6 addr */
+	struct in6_addr src, dst;		
+	/* Mask for src and dest IP6 addr */
+	struct in6_addr smsk, dmsk;
+	char iniface[IFNAMSIZ], outiface[IFNAMSIZ];
+	unsigned char iniface_mask[IFNAMSIZ], outiface_mask[IFNAMSIZ];
+
+	/* Upper protocol number
+	 * - The allowed value is 0 (any) or protocol number of last parsable
+	 *   header, which is 50 (ESP), 59 (No Next Header), 135 (MH), or
+	 *   the non IPv6 extension headers.
+	 * - The protocol numbers of IPv6 extension headers except of ESP and
+	 *   MH do not match any packets.
+	 * - You also need to set IP6T_FLAGS_PROTO to "flags" to check protocol.
+	 */
+	__u16 proto;
+	/* TOS to match iff flags & IP6T_F_TOS */
+	__u8 tos;
+
+	/* Flags word */
+	__u8 flags;
+	/* Inverse flags */
+	__u8 invflags;
+};
+
+/* Values for "flag" field in struct ip6t_ip6 (general ip6 structure). */
+#define IP6T_F_PROTO		0x01	/* Set if rule cares about upper 
+					   protocols */
+#define IP6T_F_TOS		0x02	/* Match the TOS. */
+#define IP6T_F_GOTO		0x04	/* Set if jump is a goto */
+#define IP6T_F_MASK		0x07	/* All possible flag bits mask. */
+
+/* Values for "inv" field in struct ip6t_ip6. */
+#define IP6T_INV_VIA_IN		0x01	/* Invert the sense of IN IFACE. */
+#define IP6T_INV_VIA_OUT		0x02	/* Invert the sense of OUT IFACE */
+#define IP6T_INV_TOS		0x04	/* Invert the sense of TOS. */
+#define IP6T_INV_SRCIP		0x08	/* Invert the sense of SRC IP. */
+#define IP6T_INV_DSTIP		0x10	/* Invert the sense of DST OP. */
+#define IP6T_INV_FRAG		0x20	/* Invert the sense of FRAG. */
+#define IP6T_INV_PROTO		XT_INV_PROTO
+#define IP6T_INV_MASK		0x7F	/* All possible flag bits mask. */
+
+/* This structure defines each of the firewall rules.  Consists of 3
+   parts which are 1) general IP header stuff 2) match specific
+   stuff 3) the target to perform if the rule matches */
+struct ip6t_entry {
+	struct ip6t_ip6 ipv6;
+
+	/* Mark with fields that we care about. */
+	unsigned int nfcache;
+
+	/* Size of ipt_entry + matches */
+	__u16 target_offset;
+	/* Size of ipt_entry + matches + target */
+	__u16 next_offset;
+
+	/* Back pointer */
+	unsigned int comefrom;
+
+	/* Packet and byte counters. */
+	struct xt_counters counters;
+
+	/* The matches (if any), then the target. */
+	unsigned char elems[0];
+};
+
+/* Standard entry */
+struct ip6t_standard {
+	struct ip6t_entry entry;
+	struct xt_standard_target target;
+};
+
+struct ip6t_error {
+	struct ip6t_entry entry;
+	struct xt_error_target target;
+};
+
+#define IP6T_ENTRY_INIT(__size)						       \
+{									       \
+	.target_offset	= sizeof(struct ip6t_entry),			       \
+	.next_offset	= (__size),					       \
+}
+
+#define IP6T_STANDARD_INIT(__verdict)					       \
+{									       \
+	.entry		= IP6T_ENTRY_INIT(sizeof(struct ip6t_standard)),       \
+	.target		= XT_TARGET_INIT(XT_STANDARD_TARGET,		       \
+					 sizeof(struct xt_standard_target)),   \
+	.target.verdict	= -(__verdict) - 1,				       \
+}
+
+#define IP6T_ERROR_INIT							       \
+{									       \
+	.entry		= IP6T_ENTRY_INIT(sizeof(struct ip6t_error)),	       \
+	.target		= XT_TARGET_INIT(XT_ERROR_TARGET,		       \
+					 sizeof(struct xt_error_target)),      \
+	.target.errorname = "ERROR",					       \
+}
+
+/*
+ * New IP firewall options for [gs]etsockopt at the RAW IP level.
+ * Unlike BSD Linux inherits IP options so you don't have to use
+ * a raw socket for this. Instead we check rights in the calls.
+ *
+ * ATTENTION: check linux/in6.h before adding new number here.
+ */
+#define IP6T_BASE_CTL			64
+
+#define IP6T_SO_SET_REPLACE		(IP6T_BASE_CTL)
+#define IP6T_SO_SET_ADD_COUNTERS	(IP6T_BASE_CTL + 1)
+#define IP6T_SO_SET_MAX			IP6T_SO_SET_ADD_COUNTERS
+
+#define IP6T_SO_GET_INFO		(IP6T_BASE_CTL)
+#define IP6T_SO_GET_ENTRIES		(IP6T_BASE_CTL + 1)
+#define IP6T_SO_GET_REVISION_MATCH	(IP6T_BASE_CTL + 4)
+#define IP6T_SO_GET_REVISION_TARGET	(IP6T_BASE_CTL + 5)
+#define IP6T_SO_GET_MAX			IP6T_SO_GET_REVISION_TARGET
+
+/* ICMP matching stuff */
+struct ip6t_icmp {
+	__u8 type;				/* type to match */
+	__u8 code[2];				/* range of code */
+	__u8 invflags;				/* Inverse flags */
+};
+
+/* Values for "inv" field for struct ipt_icmp. */
+#define IP6T_ICMP_INV	0x01	/* Invert the sense of type/code test */
+
+/* The argument to IP6T_SO_GET_INFO */
+struct ip6t_getinfo {
+	/* Which table: caller fills this in. */
+	char name[XT_TABLE_MAXNAMELEN];
+
+	/* Kernel fills these in. */
+	/* Which hook entry points are valid: bitmask */
+	unsigned int valid_hooks;
+
+	/* Hook entry points: one per netfilter hook. */
+	unsigned int hook_entry[NF_INET_NUMHOOKS];
+
+	/* Underflow points. */
+	unsigned int underflow[NF_INET_NUMHOOKS];
+
+	/* Number of entries */
+	unsigned int num_entries;
+
+	/* Size of entries. */
+	unsigned int size;
+};
+
+/* The argument to IP6T_SO_SET_REPLACE. */
+struct ip6t_replace {
+	/* Which table. */
+	char name[XT_TABLE_MAXNAMELEN];
+
+	/* Which hook entry points are valid: bitmask.  You can't
+           change this. */
+	unsigned int valid_hooks;
+
+	/* Number of entries */
+	unsigned int num_entries;
+
+	/* Total size of new entries */
+	unsigned int size;
+
+	/* Hook entry points. */
+	unsigned int hook_entry[NF_INET_NUMHOOKS];
+
+	/* Underflow points. */
+	unsigned int underflow[NF_INET_NUMHOOKS];
+
+	/* Information about old entries: */
+	/* Number of counters (must be equal to current number of entries). */
+	unsigned int num_counters;
+	/* The old entries' counters. */
+	struct xt_counters __user *counters;
+
+	/* The entries (hang off end: not really an array). */
+	struct ip6t_entry entries[0];
+};
+
+/* The argument to IP6T_SO_GET_ENTRIES. */
+struct ip6t_get_entries {
+	/* Which table: user fills this in. */
+	char name[XT_TABLE_MAXNAMELEN];
+
+	/* User fills this in: total entry size. */
+	unsigned int size;
+
+	/* The entries. */
+	struct ip6t_entry entrytable[0];
+};
+
+/* Helper functions */
+static __inline__ struct xt_entry_target *
+ip6t_get_target(struct ip6t_entry *e)
+{
+	return (void *)e + e->target_offset;
+}
+
+/*
+ *	Main firewall chains definitions and global var's definitions.
+ */
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+extern void ip6t_init(void) __init;
+
+extern void *ip6t_alloc_initial_table(const struct xt_table *);
+extern struct xt_table *ip6t_register_table(struct net *net,
+					    const struct xt_table *table,
+					    const struct ip6t_replace *repl);
+extern void ip6t_unregister_table(struct net *net, struct xt_table *table);
+extern unsigned int ip6t_do_table(struct sk_buff *skb,
+				  unsigned int hook,
+				  const struct net_device *in,
+				  const struct net_device *out,
+				  struct xt_table *table);
+
+/* Check for an extension */
+static inline int
+ip6t_ext_hdr(u8 nexthdr)
+{	return (nexthdr == IPPROTO_HOPOPTS) ||
+	       (nexthdr == IPPROTO_ROUTING) ||
+	       (nexthdr == IPPROTO_FRAGMENT) ||
+	       (nexthdr == IPPROTO_ESP) ||
+	       (nexthdr == IPPROTO_AH) ||
+	       (nexthdr == IPPROTO_NONE) ||
+	       (nexthdr == IPPROTO_DSTOPTS);
+}
+
+/* find specified header and get offset to it */
+extern int ipv6_find_hdr(const struct sk_buff *skb, unsigned int *offset,
+			 int target, unsigned short *fragoff);
+
+#ifdef CONFIG_COMPAT
+#include <net/compat.h>
+
+struct compat_ip6t_entry {
+	struct ip6t_ip6 ipv6;
+	compat_uint_t nfcache;
+	__u16 target_offset;
+	__u16 next_offset;
+	compat_uint_t comefrom;
+	struct compat_xt_counters counters;
+	unsigned char elems[0];
+};
+
+static inline struct xt_entry_target *
+compat_ip6t_get_target(struct compat_ip6t_entry *e)
+{
+	return (void *)e + e->target_offset;
+}
+
+#endif /* CONFIG_COMPAT */
+#endif /*__KERNEL__*/
+#endif /* _IP6_TABLES_H */
diff --git a/include/linux/netfilter_ipv6/ip6t_HL.h b/include/linux/netfilter_ipv6/ip6t_HL.h
new file mode 100644
index 00000000..ebd8ead1
--- /dev/null
+++ b/include/linux/netfilter_ipv6/ip6t_HL.h
@@ -0,0 +1,24 @@
+/* Hop Limit modification module for ip6tables
+ * Maciej Soltysiak <solt@dns.toxicfilms.tv>
+ * Based on HW's TTL module */
+
+#ifndef _IP6T_HL_H
+#define _IP6T_HL_H
+
+#include <linux/types.h>
+
+enum {
+	IP6T_HL_SET = 0,
+	IP6T_HL_INC,
+	IP6T_HL_DEC
+};
+
+#define IP6T_HL_MAXMODE	IP6T_HL_DEC
+
+struct ip6t_HL_info {
+	__u8	mode;
+	__u8	hop_limit;
+};
+
+
+#endif
diff --git a/include/linux/netfilter_ipv6/ip6t_LOG.h b/include/linux/netfilter_ipv6/ip6t_LOG.h
new file mode 100644
index 00000000..3dd0bc4e
--- /dev/null
+++ b/include/linux/netfilter_ipv6/ip6t_LOG.h
@@ -0,0 +1,21 @@
+#ifndef _IP6T_LOG_H
+#define _IP6T_LOG_H
+
+#warning "Please update iptables, this file will be removed soon!"
+
+/* make sure not to change this without changing netfilter.h:NF_LOG_* (!) */
+#define IP6T_LOG_TCPSEQ		0x01	/* Log TCP sequence numbers */
+#define IP6T_LOG_TCPOPT		0x02	/* Log TCP options */
+#define IP6T_LOG_IPOPT		0x04	/* Log IP options */
+#define IP6T_LOG_UID		0x08	/* Log UID owning local socket */
+#define IP6T_LOG_NFLOG		0x10	/* Unsupported, don't use */
+#define IP6T_LOG_MACDECODE	0x20	/* Decode MAC header */
+#define IP6T_LOG_MASK		0x2f
+
+struct ip6t_log_info {
+	unsigned char level;
+	unsigned char logflags;
+	char prefix[30];
+};
+
+#endif /*_IPT_LOG_H*/
diff --git a/include/linux/netfilter_ipv6/ip6t_REJECT.h b/include/linux/netfilter_ipv6/ip6t_REJECT.h
new file mode 100644
index 00000000..205ed62e
--- /dev/null
+++ b/include/linux/netfilter_ipv6/ip6t_REJECT.h
@@ -0,0 +1,20 @@
+#ifndef _IP6T_REJECT_H
+#define _IP6T_REJECT_H
+
+#include <linux/types.h>
+
+enum ip6t_reject_with {
+	IP6T_ICMP6_NO_ROUTE,
+	IP6T_ICMP6_ADM_PROHIBITED,
+	IP6T_ICMP6_NOT_NEIGHBOUR,
+	IP6T_ICMP6_ADDR_UNREACH,
+	IP6T_ICMP6_PORT_UNREACH,
+	IP6T_ICMP6_ECHOREPLY,
+	IP6T_TCP_RESET
+};
+
+struct ip6t_reject_info {
+	__u32	with;	/* reject type */
+};
+
+#endif /*_IP6T_REJECT_H*/
diff --git a/include/linux/netfilter_ipv6/ip6t_ah.h b/include/linux/netfilter_ipv6/ip6t_ah.h
new file mode 100644
index 00000000..5da2b65c
--- /dev/null
+++ b/include/linux/netfilter_ipv6/ip6t_ah.h
@@ -0,0 +1,22 @@
+#ifndef _IP6T_AH_H
+#define _IP6T_AH_H
+
+#include <linux/types.h>
+
+struct ip6t_ah {
+	__u32 spis[2];			/* Security Parameter Index */
+	__u32 hdrlen;			/* Header Length */
+	__u8  hdrres;			/* Test of the Reserved Filed */
+	__u8  invflags;			/* Inverse flags */
+};
+
+#define IP6T_AH_SPI 0x01
+#define IP6T_AH_LEN 0x02
+#define IP6T_AH_RES 0x04
+
+/* Values for "invflags" field in struct ip6t_ah. */
+#define IP6T_AH_INV_SPI		0x01	/* Invert the sense of spi. */
+#define IP6T_AH_INV_LEN		0x02	/* Invert the sense of length. */
+#define IP6T_AH_INV_MASK	0x03	/* All possible flags. */
+
+#endif /*_IP6T_AH_H*/
diff --git a/include/linux/netfilter_ipv6/ip6t_frag.h b/include/linux/netfilter_ipv6/ip6t_frag.h
new file mode 100644
index 00000000..b47f61b9
--- /dev/null
+++ b/include/linux/netfilter_ipv6/ip6t_frag.h
@@ -0,0 +1,25 @@
+#ifndef _IP6T_FRAG_H
+#define _IP6T_FRAG_H
+
+#include <linux/types.h>
+
+struct ip6t_frag {
+	__u32 ids[2];			/* Security Parameter Index */
+	__u32 hdrlen;			/* Header Length */
+	__u8  flags;			/*  */
+	__u8  invflags;			/* Inverse flags */
+};
+
+#define IP6T_FRAG_IDS 		0x01
+#define IP6T_FRAG_LEN 		0x02
+#define IP6T_FRAG_RES 		0x04
+#define IP6T_FRAG_FST 		0x08
+#define IP6T_FRAG_MF  		0x10
+#define IP6T_FRAG_NMF  		0x20
+
+/* Values for "invflags" field in struct ip6t_frag. */
+#define IP6T_FRAG_INV_IDS	0x01	/* Invert the sense of ids. */
+#define IP6T_FRAG_INV_LEN	0x02	/* Invert the sense of length. */
+#define IP6T_FRAG_INV_MASK	0x03	/* All possible flags. */
+
+#endif /*_IP6T_FRAG_H*/
diff --git a/include/linux/netfilter_ipv6/ip6t_hl.h b/include/linux/netfilter_ipv6/ip6t_hl.h
new file mode 100644
index 00000000..6e76dbc6
--- /dev/null
+++ b/include/linux/netfilter_ipv6/ip6t_hl.h
@@ -0,0 +1,24 @@
+/* ip6tables module for matching the Hop Limit value
+ * Maciej Soltysiak <solt@dns.toxicfilms.tv>
+ * Based on HW's ttl module */
+
+#ifndef _IP6T_HL_H
+#define _IP6T_HL_H
+
+#include <linux/types.h>
+
+enum {
+	IP6T_HL_EQ = 0,		/* equals */
+	IP6T_HL_NE,		/* not equals */
+	IP6T_HL_LT,		/* less than */
+	IP6T_HL_GT,		/* greater than */
+};
+
+
+struct ip6t_hl_info {
+	__u8	mode;
+	__u8	hop_limit;
+};
+
+
+#endif
diff --git a/include/linux/netfilter_ipv6/ip6t_ipv6header.h b/include/linux/netfilter_ipv6/ip6t_ipv6header.h
new file mode 100644
index 00000000..efae3a20
--- /dev/null
+++ b/include/linux/netfilter_ipv6/ip6t_ipv6header.h
@@ -0,0 +1,28 @@
+/* ipv6header match - matches IPv6 packets based
+on whether they contain certain headers */
+
+/* Original idea: Brad Chapman 
+ * Rewritten by: Andras Kis-Szabo <kisza@sch.bme.hu> */
+
+
+#ifndef __IPV6HEADER_H
+#define __IPV6HEADER_H
+
+#include <linux/types.h>
+
+struct ip6t_ipv6header_info {
+	__u8 matchflags;
+	__u8 invflags;
+	__u8 modeflag;
+};
+
+#define MASK_HOPOPTS    128
+#define MASK_DSTOPTS    64
+#define MASK_ROUTING    32
+#define MASK_FRAGMENT   16
+#define MASK_AH         8
+#define MASK_ESP        4
+#define MASK_NONE       2
+#define MASK_PROTO      1
+
+#endif /* __IPV6HEADER_H */
diff --git a/include/linux/netfilter_ipv6/ip6t_mh.h b/include/linux/netfilter_ipv6/ip6t_mh.h
new file mode 100644
index 00000000..a7729a50
--- /dev/null
+++ b/include/linux/netfilter_ipv6/ip6t_mh.h
@@ -0,0 +1,16 @@
+#ifndef _IP6T_MH_H
+#define _IP6T_MH_H
+
+#include <linux/types.h>
+
+/* MH matching stuff */
+struct ip6t_mh {
+	__u8 types[2];	/* MH type range */
+	__u8 invflags;	/* Inverse flags */
+};
+
+/* Values for "invflags" field in struct ip6t_mh. */
+#define IP6T_MH_INV_TYPE	0x01	/* Invert the sense of type. */
+#define IP6T_MH_INV_MASK	0x01	/* All possible flags. */
+
+#endif /*_IP6T_MH_H*/
diff --git a/include/linux/netfilter_ipv6/ip6t_opts.h b/include/linux/netfilter_ipv6/ip6t_opts.h
new file mode 100644
index 00000000..17d419a8
--- /dev/null
+++ b/include/linux/netfilter_ipv6/ip6t_opts.h
@@ -0,0 +1,24 @@
+#ifndef _IP6T_OPTS_H
+#define _IP6T_OPTS_H
+
+#include <linux/types.h>
+
+#define IP6T_OPTS_OPTSNR 16
+
+struct ip6t_opts {
+	__u32 hdrlen;			/* Header Length */
+	__u8 flags;				/*  */
+	__u8 invflags;			/* Inverse flags */
+	__u16 opts[IP6T_OPTS_OPTSNR];	/* opts */
+	__u8 optsnr;			/* Nr of OPts */
+};
+
+#define IP6T_OPTS_LEN 		0x01
+#define IP6T_OPTS_OPTS 		0x02
+#define IP6T_OPTS_NSTRICT	0x04
+
+/* Values for "invflags" field in struct ip6t_rt. */
+#define IP6T_OPTS_INV_LEN	0x01	/* Invert the sense of length. */
+#define IP6T_OPTS_INV_MASK	0x01	/* All possible flags. */
+
+#endif /*_IP6T_OPTS_H*/
diff --git a/include/linux/netfilter_ipv6/ip6t_rt.h b/include/linux/netfilter_ipv6/ip6t_rt.h
new file mode 100644
index 00000000..7605a5ff
--- /dev/null
+++ b/include/linux/netfilter_ipv6/ip6t_rt.h
@@ -0,0 +1,33 @@
+#ifndef _IP6T_RT_H
+#define _IP6T_RT_H
+
+#include <linux/types.h>
+/*#include <linux/in6.h>*/
+
+#define IP6T_RT_HOPS 16
+
+struct ip6t_rt {
+	__u32 rt_type;			/* Routing Type */
+	__u32 segsleft[2];			/* Segments Left */
+	__u32 hdrlen;			/* Header Length */
+	__u8  flags;			/*  */
+	__u8  invflags;			/* Inverse flags */
+	struct in6_addr addrs[IP6T_RT_HOPS];	/* Hops */
+	__u8 addrnr;			/* Nr of Addresses */
+};
+
+#define IP6T_RT_TYP 		0x01
+#define IP6T_RT_SGS 		0x02
+#define IP6T_RT_LEN 		0x04
+#define IP6T_RT_RES 		0x08
+#define IP6T_RT_FST_MASK	0x30
+#define IP6T_RT_FST 		0x10
+#define IP6T_RT_FST_NSTRICT	0x20
+
+/* Values for "invflags" field in struct ip6t_rt. */
+#define IP6T_RT_INV_TYP		0x01	/* Invert the sense of type. */
+#define IP6T_RT_INV_SGS		0x02	/* Invert the sense of Segments. */
+#define IP6T_RT_INV_LEN		0x04	/* Invert the sense of length. */
+#define IP6T_RT_INV_MASK	0x07	/* All possible flags. */
+
+#endif /*_IP6T_RT_H*/
diff --git a/include/linux/netlink.h b/include/linux/netlink.h
new file mode 100644
index 00000000..a2092f58
--- /dev/null
+++ b/include/linux/netlink.h
@@ -0,0 +1,270 @@
+#ifndef __LINUX_NETLINK_H
+#define __LINUX_NETLINK_H
+
+#include <linux/socket.h> /* for __kernel_sa_family_t */
+#include <linux/types.h>
+
+#define NETLINK_ROUTE		0	/* Routing/device hook				*/
+#define NETLINK_UNUSED		1	/* Unused number				*/
+#define NETLINK_USERSOCK	2	/* Reserved for user mode socket protocols 	*/
+#define NETLINK_FIREWALL	3	/* Firewalling hook				*/
+#define NETLINK_SOCK_DIAG	4	/* socket monitoring				*/
+#define NETLINK_NFLOG		5	/* netfilter/iptables ULOG */
+#define NETLINK_XFRM		6	/* ipsec */
+#define NETLINK_SELINUX		7	/* SELinux event notifications */
+#define NETLINK_ISCSI		8	/* Open-iSCSI */
+#define NETLINK_AUDIT		9	/* auditing */
+#define NETLINK_FIB_LOOKUP	10	
+#define NETLINK_CONNECTOR	11
+#define NETLINK_NETFILTER	12	/* netfilter subsystem */
+#define NETLINK_IP6_FW		13
+#define NETLINK_DNRTMSG		14	/* DECnet routing messages */
+#define NETLINK_KOBJECT_UEVENT	15	/* Kernel messages to userspace */
+#define NETLINK_GENERIC		16
+/* leave room for NETLINK_DM (DM Events) */
+#define NETLINK_SCSITRANSPORT	18	/* SCSI Transports */
+#define NETLINK_ECRYPTFS	19
+#define NETLINK_RDMA		20
+#define NETLINK_CRYPTO		21	/* Crypto layer */
+
+#define NETLINK_INET_DIAG	NETLINK_SOCK_DIAG
+
+#define MAX_LINKS 32		
+
+struct sockaddr_nl {
+	__kernel_sa_family_t	nl_family;	/* AF_NETLINK	*/
+	unsigned short	nl_pad;		/* zero		*/
+	__u32		nl_pid;		/* port ID	*/
+       	__u32		nl_groups;	/* multicast groups mask */
+};
+
+struct nlmsghdr {
+	__u32		nlmsg_len;	/* Length of message including header */
+	__u16		nlmsg_type;	/* Message content */
+	__u16		nlmsg_flags;	/* Additional flags */
+	__u32		nlmsg_seq;	/* Sequence number */
+	__u32		nlmsg_pid;	/* Sending process port ID */
+};
+
+/* Flags values */
+
+#define NLM_F_REQUEST		1	/* It is request message. 	*/
+#define NLM_F_MULTI		2	/* Multipart message, terminated by NLMSG_DONE */
+#define NLM_F_ACK		4	/* Reply with ack, with zero or error code */
+#define NLM_F_ECHO		8	/* Echo this request 		*/
+#define NLM_F_DUMP_INTR		16	/* Dump was inconsistent due to sequence change */
+
+/* Modifiers to GET request */
+#define NLM_F_ROOT	0x100	/* specify tree	root	*/
+#define NLM_F_MATCH	0x200	/* return all matching	*/
+#define NLM_F_ATOMIC	0x400	/* atomic GET		*/
+#define NLM_F_DUMP	(NLM_F_ROOT|NLM_F_MATCH)
+
+/* Modifiers to NEW request */
+#define NLM_F_REPLACE	0x100	/* Override existing		*/
+#define NLM_F_EXCL	0x200	/* Do not touch, if it exists	*/
+#define NLM_F_CREATE	0x400	/* Create, if it does not exist	*/
+#define NLM_F_APPEND	0x800	/* Add to end of list		*/
+
+/*
+   4.4BSD ADD		NLM_F_CREATE|NLM_F_EXCL
+   4.4BSD CHANGE	NLM_F_REPLACE
+
+   True CHANGE		NLM_F_CREATE|NLM_F_REPLACE
+   Append		NLM_F_CREATE
+   Check		NLM_F_EXCL
+ */
+
+#define NLMSG_ALIGNTO	4U
+#define NLMSG_ALIGN(len) ( ((len)+NLMSG_ALIGNTO-1) & ~(NLMSG_ALIGNTO-1) )
+#define NLMSG_HDRLEN	 ((int) NLMSG_ALIGN(sizeof(struct nlmsghdr)))
+#define NLMSG_LENGTH(len) ((len)+NLMSG_ALIGN(NLMSG_HDRLEN))
+#define NLMSG_SPACE(len) NLMSG_ALIGN(NLMSG_LENGTH(len))
+#define NLMSG_DATA(nlh)  ((void*)(((char*)nlh) + NLMSG_LENGTH(0)))
+#define NLMSG_NEXT(nlh,len)	 ((len) -= NLMSG_ALIGN((nlh)->nlmsg_len), \
+				  (struct nlmsghdr*)(((char*)(nlh)) + NLMSG_ALIGN((nlh)->nlmsg_len)))
+#define NLMSG_OK(nlh,len) ((len) >= (int)sizeof(struct nlmsghdr) && \
+			   (nlh)->nlmsg_len >= sizeof(struct nlmsghdr) && \
+			   (nlh)->nlmsg_len <= (len))
+#define NLMSG_PAYLOAD(nlh,len) ((nlh)->nlmsg_len - NLMSG_SPACE((len)))
+
+#define NLMSG_NOOP		0x1	/* Nothing.		*/
+#define NLMSG_ERROR		0x2	/* Error		*/
+#define NLMSG_DONE		0x3	/* End of a dump	*/
+#define NLMSG_OVERRUN		0x4	/* Data lost		*/
+
+#define NLMSG_MIN_TYPE		0x10	/* < 0x10: reserved control messages */
+
+struct nlmsgerr {
+	int		error;
+	struct nlmsghdr msg;
+};
+
+#define NETLINK_ADD_MEMBERSHIP	1
+#define NETLINK_DROP_MEMBERSHIP	2
+#define NETLINK_PKTINFO		3
+#define NETLINK_BROADCAST_ERROR	4
+#define NETLINK_NO_ENOBUFS	5
+
+struct nl_pktinfo {
+	__u32	group;
+};
+
+#define NET_MAJOR 36		/* Major 36 is reserved for networking 						*/
+
+enum {
+	NETLINK_UNCONNECTED = 0,
+	NETLINK_CONNECTED,
+};
+
+/*
+ *  <------- NLA_HDRLEN ------> <-- NLA_ALIGN(payload)-->
+ * +---------------------+- - -+- - - - - - - - - -+- - -+
+ * |        Header       | Pad |     Payload       | Pad |
+ * |   (struct nlattr)   | ing |                   | ing |
+ * +---------------------+- - -+- - - - - - - - - -+- - -+
+ *  <-------------- nlattr->nla_len -------------->
+ */
+
+struct nlattr {
+	__u16           nla_len;
+	__u16           nla_type;
+};
+
+/*
+ * nla_type (16 bits)
+ * +---+---+-------------------------------+
+ * | N | O | Attribute Type                |
+ * +---+---+-------------------------------+
+ * N := Carries nested attributes
+ * O := Payload stored in network byte order
+ *
+ * Note: The N and O flag are mutually exclusive.
+ */
+#define NLA_F_NESTED		(1 << 15)
+#define NLA_F_NET_BYTEORDER	(1 << 14)
+#define NLA_TYPE_MASK		~(NLA_F_NESTED | NLA_F_NET_BYTEORDER)
+
+#define NLA_ALIGNTO		4
+#define NLA_ALIGN(len)		(((len) + NLA_ALIGNTO - 1) & ~(NLA_ALIGNTO - 1))
+#define NLA_HDRLEN		((int) NLA_ALIGN(sizeof(struct nlattr)))
+
+#ifdef __KERNEL__
+
+#include <linux/capability.h>
+#include <linux/skbuff.h>
+
+struct net;
+
+static inline struct nlmsghdr *nlmsg_hdr(const struct sk_buff *skb)
+{
+	return (struct nlmsghdr *)skb->data;
+}
+
+struct netlink_skb_parms {
+	struct ucred		creds;		/* Skb credentials	*/
+	__u32			pid;
+	__u32			dst_group;
+};
+
+#define NETLINK_CB(skb)		(*(struct netlink_skb_parms*)&((skb)->cb))
+#define NETLINK_CREDS(skb)	(&NETLINK_CB((skb)).creds)
+
+
+extern void netlink_table_grab(void);
+extern void netlink_table_ungrab(void);
+
+extern struct sock *netlink_kernel_create(struct net *net,
+					  int unit,unsigned int groups,
+					  void (*input)(struct sk_buff *skb),
+					  struct mutex *cb_mutex,
+					  struct module *module);
+extern void netlink_kernel_release(struct sock *sk);
+extern int __netlink_change_ngroups(struct sock *sk, unsigned int groups);
+extern int netlink_change_ngroups(struct sock *sk, unsigned int groups);
+extern void __netlink_clear_multicast_users(struct sock *sk, unsigned int group);
+extern void netlink_clear_multicast_users(struct sock *sk, unsigned int group);
+extern void netlink_ack(struct sk_buff *in_skb, struct nlmsghdr *nlh, int err);
+extern int netlink_has_listeners(struct sock *sk, unsigned int group);
+extern int netlink_unicast(struct sock *ssk, struct sk_buff *skb, __u32 pid, int nonblock);
+extern int netlink_broadcast(struct sock *ssk, struct sk_buff *skb, __u32 pid,
+			     __u32 group, gfp_t allocation);
+extern int netlink_broadcast_filtered(struct sock *ssk, struct sk_buff *skb,
+	__u32 pid, __u32 group, gfp_t allocation,
+	int (*filter)(struct sock *dsk, struct sk_buff *skb, void *data),
+	void *filter_data);
+extern int netlink_set_err(struct sock *ssk, __u32 pid, __u32 group, int code);
+extern int netlink_register_notifier(struct notifier_block *nb);
+extern int netlink_unregister_notifier(struct notifier_block *nb);
+
+/* finegrained unicast helpers: */
+struct sock *netlink_getsockbyfilp(struct file *filp);
+int netlink_attachskb(struct sock *sk, struct sk_buff *skb,
+		      long *timeo, struct sock *ssk);
+void netlink_detachskb(struct sock *sk, struct sk_buff *skb);
+int netlink_sendskb(struct sock *sk, struct sk_buff *skb);
+
+/*
+ *	skb should fit one page. This choice is good for headerless malloc.
+ *	But we should limit to 8K so that userspace does not have to
+ *	use enormous buffer sizes on recvmsg() calls just to avoid
+ *	MSG_TRUNC when PAGE_SIZE is very large.
+ */
+#if PAGE_SIZE < 8192UL
+#define NLMSG_GOODSIZE	SKB_WITH_OVERHEAD(PAGE_SIZE)
+#else
+#define NLMSG_GOODSIZE	SKB_WITH_OVERHEAD(8192UL)
+#endif
+
+#define NLMSG_DEFAULT_SIZE (NLMSG_GOODSIZE - NLMSG_HDRLEN)
+
+
+struct netlink_callback {
+	struct sk_buff		*skb;
+	const struct nlmsghdr	*nlh;
+	int			(*dump)(struct sk_buff * skb,
+					struct netlink_callback *cb);
+	int			(*done)(struct netlink_callback *cb);
+	void			*data;
+	u16			family;
+	u16			min_dump_alloc;
+	unsigned int		prev_seq, seq;
+	long			args[6];
+};
+
+struct netlink_notify {
+	struct net *net;
+	int pid;
+	int protocol;
+};
+
+struct nlmsghdr *
+__nlmsg_put(struct sk_buff *skb, u32 pid, u32 seq, int type, int len, int flags);
+
+#define NLMSG_NEW(skb, pid, seq, type, len, flags) \
+({	if (unlikely(skb_tailroom(skb) < (int)NLMSG_SPACE(len))) \
+		goto nlmsg_failure; \
+	__nlmsg_put(skb, pid, seq, type, len, flags); })
+
+#define NLMSG_PUT(skb, pid, seq, type, len) \
+	NLMSG_NEW(skb, pid, seq, type, len, 0)
+
+struct netlink_dump_control {
+	int (*dump)(struct sk_buff *skb, struct netlink_callback *);
+	int (*done)(struct netlink_callback*);
+	void *data;
+	u16 min_dump_alloc;
+};
+
+extern int netlink_dump_start(struct sock *ssk, struct sk_buff *skb,
+			      const struct nlmsghdr *nlh,
+			      struct netlink_dump_control *control);
+
+
+#define NL_NONROOT_RECV 0x1
+#define NL_NONROOT_SEND 0x2
+extern void netlink_set_nonroot(int protocol, unsigned flag);
+
+#endif /* __KERNEL__ */
+
+#endif	/* __LINUX_NETLINK_H */
diff --git a/include/linux/netpoll.h b/include/linux/netpoll.h
new file mode 100644
index 00000000..5dfa091c
--- /dev/null
+++ b/include/linux/netpoll.h
@@ -0,0 +1,156 @@
+/*
+ * Common code for low-level network console, dump, and debugger code
+ *
+ * Derived from netconsole, kgdb-over-ethernet, and netdump patches
+ */
+
+#ifndef _LINUX_NETPOLL_H
+#define _LINUX_NETPOLL_H
+
+#include <linux/netdevice.h>
+#include <linux/interrupt.h>
+#include <linux/rcupdate.h>
+#include <linux/list.h>
+
+struct netpoll {
+	struct net_device *dev;
+	char dev_name[IFNAMSIZ];
+	const char *name;
+	void (*rx_hook)(struct netpoll *, int, char *, int);
+
+	__be32 local_ip, remote_ip;
+	u16 local_port, remote_port;
+	u8 remote_mac[ETH_ALEN];
+
+	struct list_head rx; /* rx_np list element */
+};
+
+struct netpoll_info {
+	atomic_t refcnt;
+
+	int rx_flags;
+	spinlock_t rx_lock;
+	struct list_head rx_np; /* netpolls that registered an rx_hook */
+
+	struct sk_buff_head arp_tx; /* list of arp requests to reply to */
+	struct sk_buff_head txq;
+
+	struct delayed_work tx_work;
+
+	struct netpoll *netpoll;
+};
+
+void netpoll_send_udp(struct netpoll *np, const char *msg, int len);
+void netpoll_print_options(struct netpoll *np);
+int netpoll_parse_options(struct netpoll *np, char *opt);
+int __netpoll_setup(struct netpoll *np);
+int netpoll_setup(struct netpoll *np);
+int netpoll_trap(void);
+void netpoll_set_trap(int trap);
+void __netpoll_cleanup(struct netpoll *np);
+void netpoll_cleanup(struct netpoll *np);
+int __netpoll_rx(struct sk_buff *skb);
+void netpoll_send_skb_on_dev(struct netpoll *np, struct sk_buff *skb,
+			     struct net_device *dev);
+static inline void netpoll_send_skb(struct netpoll *np, struct sk_buff *skb)
+{
+	netpoll_send_skb_on_dev(np, skb, np->dev);
+}
+
+
+
+#ifdef CONFIG_NETPOLL
+static inline bool netpoll_rx(struct sk_buff *skb)
+{
+	struct netpoll_info *npinfo;
+	unsigned long flags;
+	bool ret = false;
+
+	local_irq_save(flags);
+	npinfo = rcu_dereference_bh(skb->dev->npinfo);
+
+	if (!npinfo || (list_empty(&npinfo->rx_np) && !npinfo->rx_flags))
+		goto out;
+
+	spin_lock(&npinfo->rx_lock);
+	/* check rx_flags again with the lock held */
+	if (npinfo->rx_flags && __netpoll_rx(skb))
+		ret = true;
+	spin_unlock(&npinfo->rx_lock);
+
+out:
+	local_irq_restore(flags);
+	return ret;
+}
+
+static inline int netpoll_rx_on(struct sk_buff *skb)
+{
+	struct netpoll_info *npinfo = rcu_dereference_bh(skb->dev->npinfo);
+
+	return npinfo && (!list_empty(&npinfo->rx_np) || npinfo->rx_flags);
+}
+
+static inline int netpoll_receive_skb(struct sk_buff *skb)
+{
+	if (!list_empty(&skb->dev->napi_list))
+		return netpoll_rx(skb);
+	return 0;
+}
+
+static inline void *netpoll_poll_lock(struct napi_struct *napi)
+{
+	struct net_device *dev = napi->dev;
+
+	if (dev && dev->npinfo) {
+		spin_lock(&napi->poll_lock);
+		napi->poll_owner = smp_processor_id();
+		return napi;
+	}
+	return NULL;
+}
+
+static inline void netpoll_poll_unlock(void *have)
+{
+	struct napi_struct *napi = have;
+
+	if (napi) {
+		napi->poll_owner = -1;
+		spin_unlock(&napi->poll_lock);
+	}
+}
+
+static inline int netpoll_tx_running(struct net_device *dev)
+{
+	return irqs_disabled();
+}
+
+#else
+static inline bool netpoll_rx(struct sk_buff *skb)
+{
+	return 0;
+}
+static inline int netpoll_rx_on(struct sk_buff *skb)
+{
+	return 0;
+}
+static inline int netpoll_receive_skb(struct sk_buff *skb)
+{
+	return 0;
+}
+static inline void *netpoll_poll_lock(struct napi_struct *napi)
+{
+	return NULL;
+}
+static inline void netpoll_poll_unlock(void *have)
+{
+}
+static inline void netpoll_netdev_init(struct net_device *dev)
+{
+}
+static inline int netpoll_tx_running(struct net_device *dev)
+{
+	return 0;
+}
+#endif
+
+#endif
diff --git a/include/linux/netrom.h b/include/linux/netrom.h
new file mode 100644
index 00000000..af7313cc
--- /dev/null
+++ b/include/linux/netrom.h
@@ -0,0 +1,36 @@
+/*
+ * These are the public elements of the Linux kernel NET/ROM implementation.
+ * For kernel AX.25 see the file ax25.h. This file requires ax25.h for the
+ * definition of the ax25_address structure.
+ */
+
+#ifndef	NETROM_KERNEL_H
+#define	NETROM_KERNEL_H
+
+#include <linux/ax25.h>
+
+#define NETROM_MTU	236
+
+#define NETROM_T1	1
+#define NETROM_T2	2
+#define NETROM_N2	3
+#define	NETROM_T4	6
+#define	NETROM_IDLE	7
+
+#define	SIOCNRDECOBS		(SIOCPROTOPRIVATE+2)
+
+struct nr_route_struct {
+#define	NETROM_NEIGH	0
+#define	NETROM_NODE	1
+	int		type;
+	ax25_address	callsign;
+	char		device[16];
+	unsigned int	quality;
+	char		mnemonic[7];
+	ax25_address	neighbour;
+	unsigned int	obs_count;
+	unsigned int	ndigis;
+	ax25_address	digipeaters[AX25_MAX_DIGIS];
+};
+
+#endif
diff --git a/include/linux/nfc.h b/include/linux/nfc.h
new file mode 100644
index 00000000..39c1fcf0
--- /dev/null
+++ b/include/linux/nfc.h
@@ -0,0 +1,171 @@
+/*
+ * Copyright (C) 2011 Instituto Nokia de Tecnologia
+ *
+ * Authors:
+ *    Lauro Ramos Venancio <lauro.venancio@openbossa.org>
+ *    Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __LINUX_NFC_H
+#define __LINUX_NFC_H
+
+#include <linux/types.h>
+#include <linux/socket.h>
+
+#define NFC_GENL_NAME "nfc"
+#define NFC_GENL_VERSION 1
+
+#define NFC_GENL_MCAST_EVENT_NAME "events"
+
+/**
+ * enum nfc_commands - supported nfc commands
+ *
+ * @NFC_CMD_UNSPEC: unspecified command
+ *
+ * @NFC_CMD_GET_DEVICE: request information about a device (requires
+ *	%NFC_ATTR_DEVICE_INDEX) or dump request to get a list of all nfc devices
+ * @NFC_CMD_DEV_UP: turn on the nfc device
+ *	(requires %NFC_ATTR_DEVICE_INDEX)
+ * @NFC_CMD_DEV_DOWN: turn off the nfc device
+ *	(requires %NFC_ATTR_DEVICE_INDEX)
+ * @NFC_CMD_START_POLL: start polling for targets using the given protocols
+ *	(requires %NFC_ATTR_DEVICE_INDEX and %NFC_ATTR_PROTOCOLS)
+ * @NFC_CMD_STOP_POLL: stop polling for targets (requires
+ *	%NFC_ATTR_DEVICE_INDEX)
+ * @NFC_CMD_GET_TARGET: dump all targets found by the previous poll (requires
+ *	%NFC_ATTR_DEVICE_INDEX)
+ * @NFC_EVENT_TARGETS_FOUND: event emitted when a new target is found
+ *	(it sends %NFC_ATTR_DEVICE_INDEX)
+ * @NFC_EVENT_DEVICE_ADDED: event emitted when a new device is registred
+ *	(it sends %NFC_ATTR_DEVICE_NAME, %NFC_ATTR_DEVICE_INDEX and
+ *	%NFC_ATTR_PROTOCOLS)
+ * @NFC_EVENT_DEVICE_REMOVED: event emitted when a device is removed
+ *	(it sends %NFC_ATTR_DEVICE_INDEX)
+ */
+enum nfc_commands {
+	NFC_CMD_UNSPEC,
+	NFC_CMD_GET_DEVICE,
+	NFC_CMD_DEV_UP,
+	NFC_CMD_DEV_DOWN,
+	NFC_CMD_DEP_LINK_UP,
+	NFC_CMD_DEP_LINK_DOWN,
+	NFC_CMD_START_POLL,
+	NFC_CMD_STOP_POLL,
+	NFC_CMD_GET_TARGET,
+	NFC_EVENT_TARGETS_FOUND,
+	NFC_EVENT_DEVICE_ADDED,
+	NFC_EVENT_DEVICE_REMOVED,
+/* private: internal use only */
+	__NFC_CMD_AFTER_LAST
+};
+#define NFC_CMD_MAX (__NFC_CMD_AFTER_LAST - 1)
+
+/**
+ * enum nfc_attrs - supported nfc attributes
+ *
+ * @NFC_ATTR_UNSPEC: unspecified attribute
+ *
+ * @NFC_ATTR_DEVICE_INDEX: index of nfc device
+ * @NFC_ATTR_DEVICE_NAME: device name, max 8 chars
+ * @NFC_ATTR_PROTOCOLS: nfc protocols - bitwise or-ed combination from
+ *	NFC_PROTO_*_MASK constants
+ * @NFC_ATTR_TARGET_INDEX: index of the nfc target
+ * @NFC_ATTR_TARGET_SENS_RES: NFC-A targets extra information such as NFCID
+ * @NFC_ATTR_TARGET_SEL_RES: NFC-A targets extra information (useful if the
+ *	target is not NFC-Forum compliant)
+ * @NFC_ATTR_TARGET_NFCID1: NFC-A targets identifier, max 10 bytes
+ * @NFC_ATTR_TARGET_SENSB_RES: NFC-B targets extra information, max 12 bytes
+ * @NFC_ATTR_TARGET_SENSF_RES: NFC-F targets extra information, max 18 bytes
+ * @NFC_ATTR_COMM_MODE: Passive or active mode
+ * @NFC_ATTR_RF_MODE: Initiator or target
+ */
+enum nfc_attrs {
+	NFC_ATTR_UNSPEC,
+	NFC_ATTR_DEVICE_INDEX,
+	NFC_ATTR_DEVICE_NAME,
+	NFC_ATTR_PROTOCOLS,
+	NFC_ATTR_TARGET_INDEX,
+	NFC_ATTR_TARGET_SENS_RES,
+	NFC_ATTR_TARGET_SEL_RES,
+	NFC_ATTR_TARGET_NFCID1,
+	NFC_ATTR_TARGET_SENSB_RES,
+	NFC_ATTR_TARGET_SENSF_RES,
+	NFC_ATTR_COMM_MODE,
+	NFC_ATTR_RF_MODE,
+	NFC_ATTR_DEVICE_POWERED,
+/* private: internal use only */
+	__NFC_ATTR_AFTER_LAST
+};
+#define NFC_ATTR_MAX (__NFC_ATTR_AFTER_LAST - 1)
+
+#define NFC_DEVICE_NAME_MAXSIZE 8
+#define NFC_NFCID1_MAXSIZE 10
+#define NFC_SENSB_RES_MAXSIZE 12
+#define NFC_SENSF_RES_MAXSIZE 18
+
+/* NFC protocols */
+#define NFC_PROTO_JEWEL		1
+#define NFC_PROTO_MIFARE	2
+#define NFC_PROTO_FELICA	3
+#define NFC_PROTO_ISO14443	4
+#define NFC_PROTO_NFC_DEP	5
+
+#define NFC_PROTO_MAX		6
+
+/* NFC communication modes */
+#define NFC_COMM_ACTIVE  0
+#define NFC_COMM_PASSIVE 1
+
+/* NFC RF modes */
+#define NFC_RF_INITIATOR 0
+#define NFC_RF_TARGET    1
+
+/* NFC protocols masks used in bitsets */
+#define NFC_PROTO_JEWEL_MASK	(1 << NFC_PROTO_JEWEL)
+#define NFC_PROTO_MIFARE_MASK	(1 << NFC_PROTO_MIFARE)
+#define NFC_PROTO_FELICA_MASK	(1 << NFC_PROTO_FELICA)
+#define NFC_PROTO_ISO14443_MASK	(1 << NFC_PROTO_ISO14443)
+#define NFC_PROTO_NFC_DEP_MASK	(1 << NFC_PROTO_NFC_DEP)
+
+struct sockaddr_nfc {
+	sa_family_t sa_family;
+	__u32 dev_idx;
+	__u32 target_idx;
+	__u32 nfc_protocol;
+};
+
+#define NFC_LLCP_MAX_SERVICE_NAME 63
+struct sockaddr_nfc_llcp {
+	sa_family_t sa_family;
+	__u32 dev_idx;
+	__u32 target_idx;
+	__u32 nfc_protocol;
+	__u8 dsap; /* Destination SAP, if known */
+	__u8 ssap; /* Source SAP to be bound to */
+	char service_name[NFC_LLCP_MAX_SERVICE_NAME]; /* Service name URI */;
+	size_t service_name_len;
+};
+
+/* NFC socket protocols */
+#define NFC_SOCKPROTO_RAW	0
+#define NFC_SOCKPROTO_LLCP	1
+#define NFC_SOCKPROTO_MAX	2
+
+#define NFC_HEADER_SIZE 1
+
+#endif /*__LINUX_NFC_H */
diff --git a/include/linux/nfc/bcm2079x.h b/include/linux/nfc/bcm2079x.h
new file mode 100644
index 00000000..689757aa
--- /dev/null
+++ b/include/linux/nfc/bcm2079x.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2012 Broadcom Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _BCM2079X_H
+#define _BCM2079X_H
+
+#define BCMNFC_MAGIC	0xFA
+
+/*
+ * BCMNFC power control via ioctl
+ * BCMNFC_POWER_CTL(0): power off
+ * BCMNFC_POWER_CTL(1): power on
+ * BCMNFC_WAKE_CTL(0): wake off
+ * BCMNFC_WAKE_CTL(1): wake on
+ */
+#define BCMNFC_POWER_CTL		_IO(BCMNFC_MAGIC, 0x01)
+#define BCMNFC_CHANGE_ADDR		_IO(BCMNFC_MAGIC, 0x02)
+#define BCMNFC_READ_FULL_PACKET		_IO(BCMNFC_MAGIC, 0x03)
+#define BCMNFC_SET_WAKE_ACTIVE_STATE	_IO(BCMNFC_MAGIC, 0x04)
+#define BCMNFC_WAKE_CTL			_IO(BCMNFC_MAGIC, 0x05)
+#define BCMNFC_READ_MULTI_PACKETS	_IO(BCMNFC_MAGIC, 0x06)
+
+struct bcm2079x_platform_data {
+	unsigned int irq_gpio;
+	unsigned int irq_no;
+	unsigned int en_gpio;
+	int wake_gpio;
+};
+
+#endif
diff --git a/include/linux/nfc/pn544.h b/include/linux/nfc/pn544.h
new file mode 100644
index 00000000..11eb2236
--- /dev/null
+++ b/include/linux/nfc/pn544.h
@@ -0,0 +1,114 @@
+/*
+ * Driver include for the PN544 NFC chip.
+ *
+ * Copyright (C) Nokia Corporation
+ *
+ * Author: Jari Vanhala <ext-jari.vanhala@nokia.com>
+ * Contact: Matti Aaltoenn <matti.j.aaltonen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _PN544_H_
+#define _PN544_H_
+
+#include <linux/i2c.h>
+
+#define PN544_DRIVER_NAME	"pn544"
+#define PN544_MAXWINDOW_SIZE	7
+#define PN544_WINDOW_SIZE	4
+#define PN544_RETRIES		10
+#define PN544_MAX_I2C_TRANSFER	0x0400
+#define PN544_MSG_MAX_SIZE	0x21 /* at normal HCI mode */
+
+
+#define PN544_MAGIC	0xE9
+
+/*
+ * PN544 power control via ioctl
+ * PN544_SET_PWR(0): power off
+ * PN544_SET_PWR(1): power on
+ * PN544_SET_PWR(2): reset and power on with firmware download enabled
+ */
+#define PN544_SET_PWR	_IOW(PN544_MAGIC, 0x01, unsigned int)
+
+
+/* ioctl */
+#define PN544_CHAR_BASE		'P'
+#define PN544_IOR(num, dtype)	_IOR(PN544_CHAR_BASE, num, dtype)
+#define PN544_IOW(num, dtype)	_IOW(PN544_CHAR_BASE, num, dtype)
+#define PN544_GET_FW_MODE	PN544_IOW(1, unsigned int)
+#define PN544_SET_FW_MODE	PN544_IOW(2, unsigned int)
+#define PN544_GET_DEBUG		PN544_IOW(3, unsigned int)
+#define PN544_SET_DEBUG		PN544_IOW(4, unsigned int)
+
+//#define PN544_SET_PWR		PN544_IOW(5, unsigned int) //add 2014-7-10
+/* Timing restrictions (ms) */
+#define PN544_RESETVEN_TIME	30 /* 7 */
+#define PN544_PVDDVEN_TIME	0
+#define PN544_VBATVEN_TIME	0
+#define PN544_GPIO4VEN_TIME	0
+#define PN544_WAKEUP_ACK	5
+#define PN544_WAKEUP_GUARD	(PN544_WAKEUP_ACK + 1)
+#define PN544_INACTIVITY_TIME	1000
+#define PN544_INTERFRAME_DELAY	200 /* us */
+#define PN544_BAUDRATE_CHANGE	150 /* us */
+
+/* Debug bits */
+#define PN544_DEBUG_BUF		0x01
+#define PN544_DEBUG_READ	0x02
+#define PN544_DEBUG_WRITE	0x04
+#define PN544_DEBUG_IRQ		0x08
+#define PN544_DEBUG_CALLS	0x10
+#define PN544_DEBUG_MODE	0x20
+
+/* Normal (HCI) mode */
+#define PN544_LLC_HCI_OVERHEAD	3 /* header + crc (to length) */
+#define PN544_LLC_MIN_SIZE	(1 + PN544_LLC_HCI_OVERHEAD) /* length + */
+#define PN544_LLC_MAX_DATA	(PN544_MSG_MAX_SIZE - 2)
+#define PN544_LLC_MAX_HCI_SIZE	(PN544_LLC_MAX_DATA - 2)
+
+struct pn544_llc_packet {
+	unsigned char length; /* of rest of packet */
+	unsigned char header;
+	unsigned char data[PN544_LLC_MAX_DATA]; /* includes crc-ccitt */
+};
+
+/* Firmware upgrade mode */
+#define PN544_FW_HEADER_SIZE	3
+/* max fw transfer is 1024bytes, but I2C limits it to 0xC0 */
+#define PN544_MAX_FW_DATA	(PN544_MAX_I2C_TRANSFER - PN544_FW_HEADER_SIZE)
+
+struct pn544_fw_packet {
+	unsigned char command; /* status in answer */
+	unsigned char length[2]; /* big-endian order (msf) */
+	unsigned char data[PN544_MAX_FW_DATA];
+};
+
+#ifdef __KERNEL__
+/* board config */
+struct pn544_nfc_platform_data {
+	int (*request_resources) (struct i2c_client *client);
+	void (*free_resources) (void);
+	void (*enable) (int fw);
+	int (*test) (void);
+	void (*disable) (void);
+	int irq_gpio, ven_gpio, firm_gpio;
+	//int irq_enable, ven_enable, firm_enable;
+	int irq_active, ven_active, firm_active;
+	
+};
+#endif /* __KERNEL__ */
+
+#endif /* _PN544_H_ */
diff --git a/include/linux/nfs.h b/include/linux/nfs.h
new file mode 100644
index 00000000..6d1fb63f
--- /dev/null
+++ b/include/linux/nfs.h
@@ -0,0 +1,173 @@
+/*
+ * NFS protocol definitions
+ *
+ * This file contains constants mostly for Version 2 of the protocol,
+ * but also has a couple of NFSv3 bits in (notably the error codes).
+ */
+#ifndef _LINUX_NFS_H
+#define _LINUX_NFS_H
+
+#define NFS_PROGRAM	100003
+#define NFS_PORT	2049
+#define NFS_MAXDATA	8192
+#define NFS_MAXPATHLEN	1024
+#define NFS_MAXNAMLEN	255
+#define NFS_MAXGROUPS	16
+#define NFS_FHSIZE	32
+#define NFS_COOKIESIZE	4
+#define NFS_FIFO_DEV	(-1)
+#define NFSMODE_FMT	0170000
+#define NFSMODE_DIR	0040000
+#define NFSMODE_CHR	0020000
+#define NFSMODE_BLK	0060000
+#define NFSMODE_REG	0100000
+#define NFSMODE_LNK	0120000
+#define NFSMODE_SOCK	0140000
+#define NFSMODE_FIFO	0010000
+
+#define NFS_MNT_PROGRAM		100005
+#define NFS_MNT_VERSION		1
+#define NFS_MNT3_VERSION	3
+
+#define NFS_PIPE_DIRNAME "nfs"
+
+/*
+ * NFS stats. The good thing with these values is that NFSv3 errors are
+ * a superset of NFSv2 errors (with the exception of NFSERR_WFLUSH which
+ * no-one uses anyway), so we can happily mix code as long as we make sure
+ * no NFSv3 errors are returned to NFSv2 clients.
+ * Error codes that have a `--' in the v2 column are not part of the
+ * standard, but seem to be widely used nevertheless.
+ */
+ enum nfs_stat {
+	NFS_OK = 0,			/* v2 v3 v4 */
+	NFSERR_PERM = 1,		/* v2 v3 v4 */
+	NFSERR_NOENT = 2,		/* v2 v3 v4 */
+	NFSERR_IO = 5,			/* v2 v3 v4 */
+	NFSERR_NXIO = 6,		/* v2 v3 v4 */
+	NFSERR_EAGAIN = 11,		/* v2 v3 */
+	NFSERR_ACCES = 13,		/* v2 v3 v4 */
+	NFSERR_EXIST = 17,		/* v2 v3 v4 */
+	NFSERR_XDEV = 18,		/*    v3 v4 */
+	NFSERR_NODEV = 19,		/* v2 v3 v4 */
+	NFSERR_NOTDIR = 20,		/* v2 v3 v4 */
+	NFSERR_ISDIR = 21,		/* v2 v3 v4 */
+	NFSERR_INVAL = 22,		/* v2 v3 v4 */
+	NFSERR_FBIG = 27,		/* v2 v3 v4 */
+	NFSERR_NOSPC = 28,		/* v2 v3 v4 */
+	NFSERR_ROFS = 30,		/* v2 v3 v4 */
+	NFSERR_MLINK = 31,		/*    v3 v4 */
+	NFSERR_OPNOTSUPP = 45,		/* v2 v3 */
+	NFSERR_NAMETOOLONG = 63,	/* v2 v3 v4 */
+	NFSERR_NOTEMPTY = 66,		/* v2 v3 v4 */
+	NFSERR_DQUOT = 69,		/* v2 v3 v4 */
+	NFSERR_STALE = 70,		/* v2 v3 v4 */
+	NFSERR_REMOTE = 71,		/* v2 v3 */
+	NFSERR_WFLUSH = 99,		/* v2    */
+	NFSERR_BADHANDLE = 10001,	/*    v3 v4 */
+	NFSERR_NOT_SYNC = 10002,	/*    v3 */
+	NFSERR_BAD_COOKIE = 10003,	/*    v3 v4 */
+	NFSERR_NOTSUPP = 10004,		/*    v3 v4 */
+	NFSERR_TOOSMALL = 10005,	/*    v3 v4 */
+	NFSERR_SERVERFAULT = 10006,	/*    v3 v4 */
+	NFSERR_BADTYPE = 10007,		/*    v3 v4 */
+	NFSERR_JUKEBOX = 10008,		/*    v3 v4 */
+	NFSERR_SAME = 10009,		/*       v4 */
+	NFSERR_DENIED = 10010,		/*       v4 */
+	NFSERR_EXPIRED = 10011,		/*       v4 */
+	NFSERR_LOCKED = 10012,		/*       v4 */
+	NFSERR_GRACE = 10013,		/*       v4 */
+	NFSERR_FHEXPIRED = 10014,	/*       v4 */
+	NFSERR_SHARE_DENIED = 10015,	/*       v4 */
+	NFSERR_WRONGSEC = 10016,	/*       v4 */
+	NFSERR_CLID_INUSE = 10017,	/*       v4 */
+	NFSERR_RESOURCE = 10018,	/*       v4 */
+	NFSERR_MOVED = 10019,		/*       v4 */
+	NFSERR_NOFILEHANDLE = 10020,	/*       v4 */
+	NFSERR_MINOR_VERS_MISMATCH = 10021,   /* v4 */
+	NFSERR_STALE_CLIENTID = 10022,	/*       v4 */
+	NFSERR_STALE_STATEID = 10023,   /*       v4 */
+	NFSERR_OLD_STATEID = 10024,     /*       v4 */
+	NFSERR_BAD_STATEID = 10025,     /*       v4 */  
+	NFSERR_BAD_SEQID = 10026,	/*       v4 */
+	NFSERR_NOT_SAME = 10027,	/*       v4 */
+	NFSERR_LOCK_RANGE = 10028,	/*       v4 */
+	NFSERR_SYMLINK = 10029,		/*       v4 */
+	NFSERR_RESTOREFH = 10030,	/*       v4 */
+	NFSERR_LEASE_MOVED = 10031,	/*       v4 */
+	NFSERR_ATTRNOTSUPP = 10032,	/*       v4 */
+	NFSERR_NO_GRACE = 10033,	/*       v4 */
+	NFSERR_RECLAIM_BAD = 10034,	/*       v4 */
+	NFSERR_RECLAIM_CONFLICT = 10035,/*       v4 */
+	NFSERR_BAD_XDR = 10036,		/*       v4 */
+	NFSERR_LOCKS_HELD = 10037,	/*       v4 */
+	NFSERR_OPENMODE = 10038,       /*       v4 */
+	NFSERR_BADOWNER = 10039,       /*       v4 */
+	NFSERR_BADCHAR = 10040,        /*       v4 */
+	NFSERR_BADNAME = 10041,        /*       v4 */
+	NFSERR_BAD_RANGE = 10042,      /*       v4 */
+	NFSERR_LOCK_NOTSUPP = 10043,   /*       v4 */
+	NFSERR_OP_ILLEGAL = 10044,     /*       v4 */
+	NFSERR_DEADLOCK = 10045,       /*       v4 */
+	NFSERR_FILE_OPEN = 10046,      /*       v4 */
+	NFSERR_ADMIN_REVOKED = 10047,  /*       v4 */
+	NFSERR_CB_PATH_DOWN = 10048,   /*       v4 */
+};
+
+/* NFSv2 file types - beware, these are not the same in NFSv3 */
+
+enum nfs_ftype {
+	NFNON = 0,
+	NFREG = 1,
+	NFDIR = 2,
+	NFBLK = 3,
+	NFCHR = 4,
+	NFLNK = 5,
+	NFSOCK = 6,
+	NFBAD = 7,
+	NFFIFO = 8
+};
+
+#ifdef __KERNEL__
+#include <linux/sunrpc/msg_prot.h>
+#include <linux/string.h>
+
+/*
+ * This is the kernel NFS client file handle representation
+ */
+#define NFS_MAXFHSIZE		128
+struct nfs_fh {
+	unsigned short		size;
+	unsigned char		data[NFS_MAXFHSIZE];
+};
+
+/*
+ * Returns a zero iff the size and data fields match.
+ * Checks only "size" bytes in the data field.
+ */
+static inline int nfs_compare_fh(const struct nfs_fh *a, const struct nfs_fh *b)
+{
+	return a->size != b->size || memcmp(a->data, b->data, a->size) != 0;
+}
+
+static inline void nfs_copy_fh(struct nfs_fh *target, const struct nfs_fh *source)
+{
+	target->size = source->size;
+	memcpy(target->data, source->data, source->size);
+}
+
+
+/*
+ * This is really a general kernel constant, but since nothing like
+ * this is defined in the kernel headers, I have to do it here.
+ */
+#define NFS_OFFSET_MAX		((__s64)((~(__u64)0) >> 1))
+
+
+enum nfs3_stable_how {
+	NFS_UNSTABLE = 0,
+	NFS_DATA_SYNC = 1,
+	NFS_FILE_SYNC = 2
+};
+#endif /* __KERNEL__ */
+#endif /* _LINUX_NFS_H */
diff --git a/include/linux/nfs2.h b/include/linux/nfs2.h
new file mode 100644
index 00000000..fde24b30
--- /dev/null
+++ b/include/linux/nfs2.h
@@ -0,0 +1,67 @@
+/*
+ * NFS protocol definitions
+ *
+ * This file contains constants for Version 2 of the protocol.
+ */
+#ifndef _LINUX_NFS2_H
+#define _LINUX_NFS2_H
+
+#define NFS2_PORT	2049
+#define NFS2_MAXDATA	8192
+#define NFS2_MAXPATHLEN	1024
+#define NFS2_MAXNAMLEN	255
+#define NFS2_MAXGROUPS	16
+#define NFS2_FHSIZE	32
+#define NFS2_COOKIESIZE	4
+#define NFS2_FIFO_DEV	(-1)
+#define NFS2MODE_FMT	0170000
+#define NFS2MODE_DIR	0040000
+#define NFS2MODE_CHR	0020000
+#define NFS2MODE_BLK	0060000
+#define NFS2MODE_REG	0100000
+#define NFS2MODE_LNK	0120000
+#define NFS2MODE_SOCK	0140000
+#define NFS2MODE_FIFO	0010000
+
+
+/* NFSv2 file types - beware, these are not the same in NFSv3 */
+enum nfs2_ftype {
+	NF2NON = 0,
+	NF2REG = 1,
+	NF2DIR = 2,
+	NF2BLK = 3,
+	NF2CHR = 4,
+	NF2LNK = 5,
+	NF2SOCK = 6,
+	NF2BAD = 7,
+	NF2FIFO = 8
+};
+
+struct nfs2_fh {
+	char			data[NFS2_FHSIZE];
+};
+
+/*
+ * Procedure numbers for NFSv2
+ */
+#define NFS2_VERSION		2
+#define NFSPROC_NULL		0
+#define NFSPROC_GETATTR		1
+#define NFSPROC_SETATTR		2
+#define NFSPROC_ROOT		3
+#define NFSPROC_LOOKUP		4
+#define NFSPROC_READLINK	5
+#define NFSPROC_READ		6
+#define NFSPROC_WRITECACHE	7
+#define NFSPROC_WRITE		8
+#define NFSPROC_CREATE		9
+#define NFSPROC_REMOVE		10
+#define NFSPROC_RENAME		11
+#define NFSPROC_LINK		12
+#define NFSPROC_SYMLINK		13
+#define NFSPROC_MKDIR		14
+#define NFSPROC_RMDIR		15
+#define NFSPROC_READDIR		16
+#define NFSPROC_STATFS		17
+
+#endif /* _LINUX_NFS2_H */
diff --git a/include/linux/nfs3.h b/include/linux/nfs3.h
new file mode 100644
index 00000000..6ccfe3b6
--- /dev/null
+++ b/include/linux/nfs3.h
@@ -0,0 +1,103 @@
+/*
+ * NFSv3 protocol definitions
+ */
+#ifndef _LINUX_NFS3_H
+#define _LINUX_NFS3_H
+
+#define NFS3_PORT		2049
+#define NFS3_MAXDATA		32768
+#define NFS3_MAXPATHLEN		PATH_MAX
+#define NFS3_MAXNAMLEN		NAME_MAX
+#define NFS3_MAXGROUPS		16
+#define NFS3_FHSIZE		64
+#define NFS3_COOKIESIZE		4
+#define NFS3_CREATEVERFSIZE	8
+#define NFS3_COOKIEVERFSIZE	8
+#define NFS3_WRITEVERFSIZE	8
+#define NFS3_FIFO_DEV		(-1)
+#define NFS3MODE_FMT		0170000
+#define NFS3MODE_DIR		0040000
+#define NFS3MODE_CHR		0020000
+#define NFS3MODE_BLK		0060000
+#define NFS3MODE_REG		0100000
+#define NFS3MODE_LNK		0120000
+#define NFS3MODE_SOCK		0140000
+#define NFS3MODE_FIFO		0010000
+
+/* Flags for access() call */
+#define NFS3_ACCESS_READ	0x0001
+#define NFS3_ACCESS_LOOKUP	0x0002
+#define NFS3_ACCESS_MODIFY	0x0004
+#define NFS3_ACCESS_EXTEND	0x0008
+#define NFS3_ACCESS_DELETE	0x0010
+#define NFS3_ACCESS_EXECUTE	0x0020
+#define NFS3_ACCESS_FULL	0x003f
+
+/* Flags for create mode */
+enum nfs3_createmode {
+	NFS3_CREATE_UNCHECKED = 0,
+	NFS3_CREATE_GUARDED = 1,
+	NFS3_CREATE_EXCLUSIVE = 2
+};
+
+/* NFSv3 file system properties */
+#define NFS3_FSF_LINK		0x0001
+#define NFS3_FSF_SYMLINK	0x0002
+#define NFS3_FSF_HOMOGENEOUS	0x0008
+#define NFS3_FSF_CANSETTIME	0x0010
+/* Some shorthands. See fs/nfsd/nfs3proc.c */
+#define NFS3_FSF_DEFAULT	0x001B
+#define NFS3_FSF_BILLYBOY	0x0018
+#define NFS3_FSF_READONLY	0x0008
+
+enum nfs3_ftype {
+	NF3NON  = 0,
+	NF3REG  = 1,
+	NF3DIR  = 2,
+	NF3BLK  = 3,
+	NF3CHR  = 4,
+	NF3LNK  = 5,
+	NF3SOCK = 6,
+	NF3FIFO = 7,	/* changed from NFSv2 (was 8) */
+	NF3BAD  = 8
+};
+
+struct nfs3_fh {
+	unsigned short size;
+	unsigned char  data[NFS3_FHSIZE];
+};
+
+#define NFS3_VERSION		3
+#define NFS3PROC_NULL		0
+#define NFS3PROC_GETATTR	1
+#define NFS3PROC_SETATTR	2
+#define NFS3PROC_LOOKUP		3
+#define NFS3PROC_ACCESS		4
+#define NFS3PROC_READLINK	5
+#define NFS3PROC_READ		6
+#define NFS3PROC_WRITE		7
+#define NFS3PROC_CREATE		8
+#define NFS3PROC_MKDIR		9
+#define NFS3PROC_SYMLINK	10
+#define NFS3PROC_MKNOD		11
+#define NFS3PROC_REMOVE		12
+#define NFS3PROC_RMDIR		13
+#define NFS3PROC_RENAME		14
+#define NFS3PROC_LINK		15
+#define NFS3PROC_READDIR	16
+#define NFS3PROC_READDIRPLUS	17
+#define NFS3PROC_FSSTAT		18
+#define NFS3PROC_FSINFO		19
+#define NFS3PROC_PATHCONF	20
+#define NFS3PROC_COMMIT		21
+
+#define NFS_MNT3_VERSION	3
+ 
+
+#if defined(__KERNEL__)
+
+/* Number of 32bit words in post_op_attr */
+#define NFS3_POST_OP_ATTR_WORDS		22
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_NFS3_H */
diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h
new file mode 100644
index 00000000..0987146b
--- /dev/null
+++ b/include/linux/nfs4.h
@@ -0,0 +1,669 @@
+/*
+ *  include/linux/nfs4.h
+ *
+ *  NFSv4 protocol definitions.
+ *
+ *  Copyright (c) 2002 The Regents of the University of Michigan.
+ *  All rights reserved.
+ *
+ *  Kendrick Smith <kmsmith@umich.edu>
+ *  Andy Adamson   <andros@umich.edu>
+ */
+
+#ifndef _LINUX_NFS4_H
+#define _LINUX_NFS4_H
+
+#include <linux/types.h>
+
+#define NFS4_BITMAP_SIZE	2
+#define NFS4_VERIFIER_SIZE	8
+#define NFS4_STATEID_SEQID_SIZE 4
+#define NFS4_STATEID_OTHER_SIZE 12
+#define NFS4_STATEID_SIZE	(NFS4_STATEID_SEQID_SIZE + NFS4_STATEID_OTHER_SIZE)
+#define NFS4_FHSIZE		128
+#define NFS4_MAXPATHLEN		PATH_MAX
+#define NFS4_MAXNAMLEN		NAME_MAX
+#define NFS4_OPAQUE_LIMIT	1024
+#define NFS4_MAX_SESSIONID_LEN	16
+
+#define NFS4_ACCESS_READ        0x0001
+#define NFS4_ACCESS_LOOKUP      0x0002
+#define NFS4_ACCESS_MODIFY      0x0004
+#define NFS4_ACCESS_EXTEND      0x0008
+#define NFS4_ACCESS_DELETE      0x0010
+#define NFS4_ACCESS_EXECUTE     0x0020
+
+#define NFS4_FH_PERSISTENT		0x0000
+#define NFS4_FH_NOEXPIRE_WITH_OPEN	0x0001
+#define NFS4_FH_VOLATILE_ANY		0x0002
+#define NFS4_FH_VOL_MIGRATION		0x0004
+#define NFS4_FH_VOL_RENAME		0x0008
+
+#define NFS4_OPEN_RESULT_CONFIRM 0x0002
+#define NFS4_OPEN_RESULT_LOCKTYPE_POSIX 0x0004
+
+#define NFS4_SHARE_ACCESS_MASK	0x000F
+#define NFS4_SHARE_ACCESS_READ	0x0001
+#define NFS4_SHARE_ACCESS_WRITE	0x0002
+#define NFS4_SHARE_ACCESS_BOTH	0x0003
+#define NFS4_SHARE_DENY_READ	0x0001
+#define NFS4_SHARE_DENY_WRITE	0x0002
+#define NFS4_SHARE_DENY_BOTH	0x0003
+
+/* nfs41 */
+#define NFS4_SHARE_WANT_MASK		0xFF00
+#define NFS4_SHARE_WANT_NO_PREFERENCE	0x0000
+#define NFS4_SHARE_WANT_READ_DELEG	0x0100
+#define NFS4_SHARE_WANT_WRITE_DELEG	0x0200
+#define NFS4_SHARE_WANT_ANY_DELEG	0x0300
+#define NFS4_SHARE_WANT_NO_DELEG	0x0400
+#define NFS4_SHARE_WANT_CANCEL		0x0500
+
+#define NFS4_SHARE_WHEN_MASK		0xF0000
+#define NFS4_SHARE_SIGNAL_DELEG_WHEN_RESRC_AVAIL	0x10000
+#define NFS4_SHARE_PUSH_DELEG_WHEN_UNCONTENDED		0x20000
+
+#define NFS4_CDFC4_FORE	0x1
+#define NFS4_CDFC4_BACK 0x2
+#define NFS4_CDFC4_BOTH 0x3
+#define NFS4_CDFC4_FORE_OR_BOTH 0x3
+#define NFS4_CDFC4_BACK_OR_BOTH 0x7
+
+#define NFS4_SET_TO_SERVER_TIME	0
+#define NFS4_SET_TO_CLIENT_TIME	1
+
+#define NFS4_ACE_ACCESS_ALLOWED_ACE_TYPE 0
+#define NFS4_ACE_ACCESS_DENIED_ACE_TYPE  1
+#define NFS4_ACE_SYSTEM_AUDIT_ACE_TYPE   2
+#define NFS4_ACE_SYSTEM_ALARM_ACE_TYPE   3
+
+#define ACL4_SUPPORT_ALLOW_ACL 0x01
+#define ACL4_SUPPORT_DENY_ACL  0x02
+#define ACL4_SUPPORT_AUDIT_ACL 0x04
+#define ACL4_SUPPORT_ALARM_ACL 0x08
+
+#define NFS4_ACE_FILE_INHERIT_ACE             0x00000001
+#define NFS4_ACE_DIRECTORY_INHERIT_ACE        0x00000002
+#define NFS4_ACE_NO_PROPAGATE_INHERIT_ACE     0x00000004
+#define NFS4_ACE_INHERIT_ONLY_ACE             0x00000008
+#define NFS4_ACE_SUCCESSFUL_ACCESS_ACE_FLAG   0x00000010
+#define NFS4_ACE_FAILED_ACCESS_ACE_FLAG       0x00000020
+#define NFS4_ACE_IDENTIFIER_GROUP             0x00000040
+
+#define NFS4_ACE_READ_DATA                    0x00000001
+#define NFS4_ACE_LIST_DIRECTORY               0x00000001
+#define NFS4_ACE_WRITE_DATA                   0x00000002
+#define NFS4_ACE_ADD_FILE                     0x00000002
+#define NFS4_ACE_APPEND_DATA                  0x00000004
+#define NFS4_ACE_ADD_SUBDIRECTORY             0x00000004
+#define NFS4_ACE_READ_NAMED_ATTRS             0x00000008
+#define NFS4_ACE_WRITE_NAMED_ATTRS            0x00000010
+#define NFS4_ACE_EXECUTE                      0x00000020
+#define NFS4_ACE_DELETE_CHILD                 0x00000040
+#define NFS4_ACE_READ_ATTRIBUTES              0x00000080
+#define NFS4_ACE_WRITE_ATTRIBUTES             0x00000100
+#define NFS4_ACE_DELETE                       0x00010000
+#define NFS4_ACE_READ_ACL                     0x00020000
+#define NFS4_ACE_WRITE_ACL                    0x00040000
+#define NFS4_ACE_WRITE_OWNER                  0x00080000
+#define NFS4_ACE_SYNCHRONIZE                  0x00100000
+#define NFS4_ACE_GENERIC_READ                 0x00120081
+#define NFS4_ACE_GENERIC_WRITE                0x00160106
+#define NFS4_ACE_GENERIC_EXECUTE              0x001200A0
+#define NFS4_ACE_MASK_ALL                     0x001F01FF
+
+#define EXCHGID4_FLAG_SUPP_MOVED_REFER		0x00000001
+#define EXCHGID4_FLAG_SUPP_MOVED_MIGR		0x00000002
+#define EXCHGID4_FLAG_BIND_PRINC_STATEID	0x00000100
+
+#define EXCHGID4_FLAG_USE_NON_PNFS		0x00010000
+#define EXCHGID4_FLAG_USE_PNFS_MDS		0x00020000
+#define EXCHGID4_FLAG_USE_PNFS_DS		0x00040000
+#define EXCHGID4_FLAG_MASK_PNFS			0x00070000
+
+#define EXCHGID4_FLAG_UPD_CONFIRMED_REC_A	0x40000000
+#define EXCHGID4_FLAG_CONFIRMED_R		0x80000000
+/*
+ * Since the validity of these bits depends on whether
+ * they're set in the argument or response, have separate
+ * invalid flag masks for arg (_A) and resp (_R).
+ */
+#define EXCHGID4_FLAG_MASK_A			0x40070103
+#define EXCHGID4_FLAG_MASK_R			0x80070103
+
+#define SEQ4_STATUS_CB_PATH_DOWN		0x00000001
+#define SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRING	0x00000002
+#define SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRED	0x00000004
+#define SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED	0x00000008
+#define SEQ4_STATUS_EXPIRED_SOME_STATE_REVOKED	0x00000010
+#define SEQ4_STATUS_ADMIN_STATE_REVOKED		0x00000020
+#define SEQ4_STATUS_RECALLABLE_STATE_REVOKED	0x00000040
+#define SEQ4_STATUS_LEASE_MOVED			0x00000080
+#define SEQ4_STATUS_RESTART_RECLAIM_NEEDED	0x00000100
+#define SEQ4_STATUS_CB_PATH_DOWN_SESSION	0x00000200
+#define SEQ4_STATUS_BACKCHANNEL_FAULT		0x00000400
+
+#define NFS4_SECINFO_STYLE4_CURRENT_FH	0
+#define NFS4_SECINFO_STYLE4_PARENT	1
+
+#define NFS4_MAX_UINT64	(~(u64)0)
+
+/* An NFS4 sessions server must support at least NFS4_MAX_OPS operations.
+ * If a compound requires more operations, adjust NFS4_MAX_OPS accordingly.
+ */
+#define NFS4_MAX_OPS   8
+
+/* Our NFS4 client back channel server only wants the cb_sequene and the
+ * actual operation per compound
+ */
+#define NFS4_MAX_BACK_CHANNEL_OPS 2
+
+enum nfs4_acl_whotype {
+	NFS4_ACL_WHO_NAMED = 0,
+	NFS4_ACL_WHO_OWNER,
+	NFS4_ACL_WHO_GROUP,
+	NFS4_ACL_WHO_EVERYONE,
+};
+
+#ifdef __KERNEL__
+#include <linux/list.h>
+
+struct nfs4_ace {
+	uint32_t	type;
+	uint32_t	flag;
+	uint32_t	access_mask;
+	int		whotype;
+	uid_t		who;
+};
+
+struct nfs4_acl {
+	uint32_t	naces;
+	struct nfs4_ace	aces[0];
+};
+
+typedef struct { char data[NFS4_VERIFIER_SIZE]; } nfs4_verifier;
+
+struct nfs_stateid4 {
+	__be32 seqid;
+	char other[NFS4_STATEID_OTHER_SIZE];
+} __attribute__ ((packed));
+
+typedef struct nfs_stateid4 nfs4_stateid;
+
+enum nfs_opnum4 {
+	OP_ACCESS = 3,
+	OP_CLOSE = 4,
+	OP_COMMIT = 5,
+	OP_CREATE = 6,
+	OP_DELEGPURGE = 7,
+	OP_DELEGRETURN = 8,
+	OP_GETATTR = 9,
+	OP_GETFH = 10,
+	OP_LINK = 11,
+	OP_LOCK = 12,
+	OP_LOCKT = 13,
+	OP_LOCKU = 14,
+	OP_LOOKUP = 15,
+	OP_LOOKUPP = 16,
+	OP_NVERIFY = 17,
+	OP_OPEN = 18,
+	OP_OPENATTR = 19,
+	OP_OPEN_CONFIRM = 20,
+	OP_OPEN_DOWNGRADE = 21,
+	OP_PUTFH = 22,
+	OP_PUTPUBFH = 23,
+	OP_PUTROOTFH = 24,
+	OP_READ = 25,
+	OP_READDIR = 26,
+	OP_READLINK = 27,
+	OP_REMOVE = 28,
+	OP_RENAME = 29,
+	OP_RENEW = 30,
+	OP_RESTOREFH = 31,
+	OP_SAVEFH = 32,
+	OP_SECINFO = 33,
+	OP_SETATTR = 34,
+	OP_SETCLIENTID = 35,
+	OP_SETCLIENTID_CONFIRM = 36,
+	OP_VERIFY = 37,
+	OP_WRITE = 38,
+	OP_RELEASE_LOCKOWNER = 39,
+
+	/* nfs41 */
+	OP_BACKCHANNEL_CTL = 40,
+	OP_BIND_CONN_TO_SESSION = 41,
+	OP_EXCHANGE_ID = 42,
+	OP_CREATE_SESSION = 43,
+	OP_DESTROY_SESSION = 44,
+	OP_FREE_STATEID = 45,
+	OP_GET_DIR_DELEGATION = 46,
+	OP_GETDEVICEINFO = 47,
+	OP_GETDEVICELIST = 48,
+	OP_LAYOUTCOMMIT = 49,
+	OP_LAYOUTGET = 50,
+	OP_LAYOUTRETURN = 51,
+	OP_SECINFO_NO_NAME = 52,
+	OP_SEQUENCE = 53,
+	OP_SET_SSV = 54,
+	OP_TEST_STATEID = 55,
+	OP_WANT_DELEGATION = 56,
+	OP_DESTROY_CLIENTID = 57,
+	OP_RECLAIM_COMPLETE = 58,
+
+	OP_ILLEGAL = 10044,
+};
+
+/*Defining first and last NFS4 operations implemented.
+Needs to be updated if more operations are defined in future.*/
+
+#define FIRST_NFS4_OP	OP_ACCESS
+#define LAST_NFS4_OP 	OP_RECLAIM_COMPLETE
+
+enum nfsstat4 {
+	NFS4_OK = 0,
+	NFS4ERR_PERM = 1,
+	NFS4ERR_NOENT = 2,
+	NFS4ERR_IO = 5,
+	NFS4ERR_NXIO = 6,
+	NFS4ERR_ACCESS = 13,
+	NFS4ERR_EXIST = 17,
+	NFS4ERR_XDEV = 18,
+	/* Unused/reserved 19 */
+	NFS4ERR_NOTDIR = 20,
+	NFS4ERR_ISDIR = 21,
+	NFS4ERR_INVAL = 22,
+	NFS4ERR_FBIG = 27,
+	NFS4ERR_NOSPC = 28,
+	NFS4ERR_ROFS = 30,
+	NFS4ERR_MLINK = 31,
+	NFS4ERR_NAMETOOLONG = 63,
+	NFS4ERR_NOTEMPTY = 66,
+	NFS4ERR_DQUOT = 69,
+	NFS4ERR_STALE = 70,
+	NFS4ERR_BADHANDLE = 10001,
+	NFS4ERR_BAD_COOKIE = 10003,
+	NFS4ERR_NOTSUPP = 10004,
+	NFS4ERR_TOOSMALL = 10005,
+	NFS4ERR_SERVERFAULT = 10006,
+	NFS4ERR_BADTYPE = 10007,
+	NFS4ERR_DELAY = 10008,
+	NFS4ERR_SAME = 10009,
+	NFS4ERR_DENIED = 10010,
+	NFS4ERR_EXPIRED = 10011,
+	NFS4ERR_LOCKED = 10012,
+	NFS4ERR_GRACE = 10013,
+	NFS4ERR_FHEXPIRED = 10014,
+	NFS4ERR_SHARE_DENIED = 10015,
+	NFS4ERR_WRONGSEC = 10016,
+	NFS4ERR_CLID_INUSE = 10017,
+	NFS4ERR_RESOURCE = 10018,
+	NFS4ERR_MOVED = 10019,
+	NFS4ERR_NOFILEHANDLE = 10020,
+	NFS4ERR_MINOR_VERS_MISMATCH = 10021,
+	NFS4ERR_STALE_CLIENTID = 10022,
+	NFS4ERR_STALE_STATEID = 10023,
+	NFS4ERR_OLD_STATEID = 10024,
+	NFS4ERR_BAD_STATEID = 10025,
+	NFS4ERR_BAD_SEQID = 10026,
+	NFS4ERR_NOT_SAME = 10027,
+	NFS4ERR_LOCK_RANGE = 10028,
+	NFS4ERR_SYMLINK = 10029,
+	NFS4ERR_RESTOREFH = 10030,
+	NFS4ERR_LEASE_MOVED = 10031,
+	NFS4ERR_ATTRNOTSUPP = 10032,
+	NFS4ERR_NO_GRACE = 10033,
+	NFS4ERR_RECLAIM_BAD = 10034,
+	NFS4ERR_RECLAIM_CONFLICT = 10035,
+	NFS4ERR_BADXDR = 10036,
+	NFS4ERR_LOCKS_HELD = 10037,
+	NFS4ERR_OPENMODE = 10038,
+	NFS4ERR_BADOWNER = 10039,
+	NFS4ERR_BADCHAR = 10040,
+	NFS4ERR_BADNAME = 10041,
+	NFS4ERR_BAD_RANGE = 10042,
+	NFS4ERR_LOCK_NOTSUPP = 10043,
+	NFS4ERR_OP_ILLEGAL = 10044,
+	NFS4ERR_DEADLOCK = 10045,
+	NFS4ERR_FILE_OPEN = 10046,
+	NFS4ERR_ADMIN_REVOKED = 10047,
+	NFS4ERR_CB_PATH_DOWN = 10048,
+
+	/* nfs41 */
+	NFS4ERR_BADIOMODE	= 10049,
+	NFS4ERR_BADLAYOUT	= 10050,
+	NFS4ERR_BAD_SESSION_DIGEST = 10051,
+	NFS4ERR_BADSESSION	= 10052,
+	NFS4ERR_BADSLOT		= 10053,
+	NFS4ERR_COMPLETE_ALREADY = 10054,
+	NFS4ERR_CONN_NOT_BOUND_TO_SESSION = 10055,
+	NFS4ERR_DELEG_ALREADY_WANTED = 10056,
+	NFS4ERR_BACK_CHAN_BUSY	= 10057,	/* backchan reqs outstanding */
+	NFS4ERR_LAYOUTTRYLATER	= 10058,
+	NFS4ERR_LAYOUTUNAVAILABLE = 10059,
+	NFS4ERR_NOMATCHING_LAYOUT = 10060,
+	NFS4ERR_RECALLCONFLICT	= 10061,
+	NFS4ERR_UNKNOWN_LAYOUTTYPE = 10062,
+	NFS4ERR_SEQ_MISORDERED = 10063, 	/* unexpected seq.id in req */
+	NFS4ERR_SEQUENCE_POS	= 10064,	/* [CB_]SEQ. op not 1st op */
+	NFS4ERR_REQ_TOO_BIG	= 10065,	/* request too big */
+	NFS4ERR_REP_TOO_BIG	= 10066,	/* reply too big */
+	NFS4ERR_REP_TOO_BIG_TO_CACHE = 10067,	/* rep. not all cached */
+	NFS4ERR_RETRY_UNCACHED_REP = 10068,	/* retry & rep. uncached */
+	NFS4ERR_UNSAFE_COMPOUND = 10069,	/* retry/recovery too hard */
+	NFS4ERR_TOO_MANY_OPS	= 10070,	/* too many ops in [CB_]COMP */
+	NFS4ERR_OP_NOT_IN_SESSION = 10071,	/* op needs [CB_]SEQ. op */
+	NFS4ERR_HASH_ALG_UNSUPP = 10072,	/* hash alg. not supp. */
+						/* Error 10073 is unused. */
+	NFS4ERR_CLIENTID_BUSY	= 10074,	/* clientid has state */
+	NFS4ERR_PNFS_IO_HOLE	= 10075,	/* IO to _SPARSE file hole */
+	NFS4ERR_SEQ_FALSE_RETRY	= 10076,	/* retry not original */
+	NFS4ERR_BAD_HIGH_SLOT	= 10077,	/* sequence arg bad */
+	NFS4ERR_DEADSESSION	= 10078,	/* persistent session dead */
+	NFS4ERR_ENCR_ALG_UNSUPP = 10079,	/* SSV alg mismatch */
+	NFS4ERR_PNFS_NO_LAYOUT	= 10080,	/* direct I/O with no layout */
+	NFS4ERR_NOT_ONLY_OP	= 10081,	/* bad compound */
+	NFS4ERR_WRONG_CRED	= 10082,	/* permissions:state change */
+	NFS4ERR_WRONG_TYPE	= 10083,	/* current operation mismatch */
+	NFS4ERR_DIRDELEG_UNAVAIL = 10084,	/* no directory delegation */
+	NFS4ERR_REJECT_DELEG	= 10085,	/* on callback */
+	NFS4ERR_RETURNCONFLICT	= 10086,	/* outstanding layoutreturn */
+	NFS4ERR_DELEG_REVOKED	= 10087,	/* deleg./layout revoked */
+};
+
+static inline bool seqid_mutating_err(u32 err)
+{
+	/* rfc 3530 section 8.1.5: */
+	switch (err) {
+	case NFS4ERR_STALE_CLIENTID:
+	case NFS4ERR_STALE_STATEID:
+	case NFS4ERR_BAD_STATEID:
+	case NFS4ERR_BAD_SEQID:
+	case NFS4ERR_BADXDR:
+	case NFS4ERR_RESOURCE:
+	case NFS4ERR_NOFILEHANDLE:
+		return false;
+	};
+	return true;
+}
+
+/*
+ * Note: NF4BAD is not actually part of the protocol; it is just used
+ * internally by nfsd.
+ */
+enum nfs_ftype4 {
+	NF4BAD		= 0,
+        NF4REG          = 1,    /* Regular File */
+        NF4DIR          = 2,    /* Directory */
+        NF4BLK          = 3,    /* Special File - block device */
+        NF4CHR          = 4,    /* Special File - character device */
+        NF4LNK          = 5,    /* Symbolic Link */
+        NF4SOCK         = 6,    /* Special File - socket */
+        NF4FIFO         = 7,    /* Special File - fifo */
+        NF4ATTRDIR      = 8,    /* Attribute Directory */
+        NF4NAMEDATTR    = 9     /* Named Attribute */
+};
+
+enum open_claim_type4 {
+	NFS4_OPEN_CLAIM_NULL = 0,
+	NFS4_OPEN_CLAIM_PREVIOUS = 1,
+	NFS4_OPEN_CLAIM_DELEGATE_CUR = 2,
+	NFS4_OPEN_CLAIM_DELEGATE_PREV = 3,
+	NFS4_OPEN_CLAIM_FH = 4, /* 4.1 */
+	NFS4_OPEN_CLAIM_DELEG_CUR_FH = 5, /* 4.1 */
+	NFS4_OPEN_CLAIM_DELEG_PREV_FH = 6, /* 4.1 */
+};
+
+enum opentype4 {
+	NFS4_OPEN_NOCREATE = 0,
+	NFS4_OPEN_CREATE = 1
+};
+
+enum createmode4 {
+	NFS4_CREATE_UNCHECKED = 0,
+	NFS4_CREATE_GUARDED = 1,
+	NFS4_CREATE_EXCLUSIVE = 2,
+	/*
+	 * New to NFSv4.1. If session is persistent,
+	 * GUARDED4 MUST be used. Otherwise, use
+	 * EXCLUSIVE4_1 instead of EXCLUSIVE4.
+	 */
+	NFS4_CREATE_EXCLUSIVE4_1 = 3
+};
+
+enum limit_by4 {
+	NFS4_LIMIT_SIZE = 1,
+	NFS4_LIMIT_BLOCKS = 2
+};
+
+enum open_delegation_type4 {
+	NFS4_OPEN_DELEGATE_NONE = 0,
+	NFS4_OPEN_DELEGATE_READ = 1,
+	NFS4_OPEN_DELEGATE_WRITE = 2,
+	NFS4_OPEN_DELEGATE_NONE_EXT = 3, /* 4.1 */
+};
+
+enum why_no_delegation4 { /* new to v4.1 */
+	WND4_NOT_WANTED = 0,
+	WND4_CONTENTION = 1,
+	WND4_RESOURCE = 2,
+	WND4_NOT_SUPP_FTYPE = 3,
+	WND4_WRITE_DELEG_NOT_SUPP_FTYPE = 4,
+	WND4_NOT_SUPP_UPGRADE = 5,
+	WND4_NOT_SUPP_DOWNGRADE = 6,
+	WND4_CANCELLED = 7,
+	WND4_IS_DIR = 8,
+};
+
+enum lock_type4 {
+	NFS4_UNLOCK_LT = 0,
+	NFS4_READ_LT = 1,
+	NFS4_WRITE_LT = 2,
+	NFS4_READW_LT = 3,
+	NFS4_WRITEW_LT = 4
+};
+
+
+/* Mandatory Attributes */
+#define FATTR4_WORD0_SUPPORTED_ATTRS    (1UL << 0)
+#define FATTR4_WORD0_TYPE               (1UL << 1)
+#define FATTR4_WORD0_FH_EXPIRE_TYPE     (1UL << 2)
+#define FATTR4_WORD0_CHANGE             (1UL << 3)
+#define FATTR4_WORD0_SIZE               (1UL << 4)
+#define FATTR4_WORD0_LINK_SUPPORT       (1UL << 5)
+#define FATTR4_WORD0_SYMLINK_SUPPORT    (1UL << 6)
+#define FATTR4_WORD0_NAMED_ATTR         (1UL << 7)
+#define FATTR4_WORD0_FSID               (1UL << 8)
+#define FATTR4_WORD0_UNIQUE_HANDLES     (1UL << 9)
+#define FATTR4_WORD0_LEASE_TIME         (1UL << 10)
+#define FATTR4_WORD0_RDATTR_ERROR       (1UL << 11)
+/* Mandatory in NFSv4.1 */
+#define FATTR4_WORD2_SUPPATTR_EXCLCREAT (1UL << 11)
+
+/* Recommended Attributes */
+#define FATTR4_WORD0_ACL                (1UL << 12)
+#define FATTR4_WORD0_ACLSUPPORT         (1UL << 13)
+#define FATTR4_WORD0_ARCHIVE            (1UL << 14)
+#define FATTR4_WORD0_CANSETTIME         (1UL << 15)
+#define FATTR4_WORD0_CASE_INSENSITIVE   (1UL << 16)
+#define FATTR4_WORD0_CASE_PRESERVING    (1UL << 17)
+#define FATTR4_WORD0_CHOWN_RESTRICTED   (1UL << 18)
+#define FATTR4_WORD0_FILEHANDLE         (1UL << 19)
+#define FATTR4_WORD0_FILEID             (1UL << 20)
+#define FATTR4_WORD0_FILES_AVAIL        (1UL << 21)
+#define FATTR4_WORD0_FILES_FREE         (1UL << 22)
+#define FATTR4_WORD0_FILES_TOTAL        (1UL << 23)
+#define FATTR4_WORD0_FS_LOCATIONS       (1UL << 24)
+#define FATTR4_WORD0_HIDDEN             (1UL << 25)
+#define FATTR4_WORD0_HOMOGENEOUS        (1UL << 26)
+#define FATTR4_WORD0_MAXFILESIZE        (1UL << 27)
+#define FATTR4_WORD0_MAXLINK            (1UL << 28)
+#define FATTR4_WORD0_MAXNAME            (1UL << 29)
+#define FATTR4_WORD0_MAXREAD            (1UL << 30)
+#define FATTR4_WORD0_MAXWRITE           (1UL << 31)
+#define FATTR4_WORD1_MIMETYPE           (1UL << 0)
+#define FATTR4_WORD1_MODE               (1UL << 1)
+#define FATTR4_WORD1_NO_TRUNC           (1UL << 2)
+#define FATTR4_WORD1_NUMLINKS           (1UL << 3)
+#define FATTR4_WORD1_OWNER              (1UL << 4)
+#define FATTR4_WORD1_OWNER_GROUP        (1UL << 5)
+#define FATTR4_WORD1_QUOTA_HARD         (1UL << 6)
+#define FATTR4_WORD1_QUOTA_SOFT         (1UL << 7)
+#define FATTR4_WORD1_QUOTA_USED         (1UL << 8)
+#define FATTR4_WORD1_RAWDEV             (1UL << 9)
+#define FATTR4_WORD1_SPACE_AVAIL        (1UL << 10)
+#define FATTR4_WORD1_SPACE_FREE         (1UL << 11)
+#define FATTR4_WORD1_SPACE_TOTAL        (1UL << 12)
+#define FATTR4_WORD1_SPACE_USED         (1UL << 13)
+#define FATTR4_WORD1_SYSTEM             (1UL << 14)
+#define FATTR4_WORD1_TIME_ACCESS        (1UL << 15)
+#define FATTR4_WORD1_TIME_ACCESS_SET    (1UL << 16)
+#define FATTR4_WORD1_TIME_BACKUP        (1UL << 17)
+#define FATTR4_WORD1_TIME_CREATE        (1UL << 18)
+#define FATTR4_WORD1_TIME_DELTA         (1UL << 19)
+#define FATTR4_WORD1_TIME_METADATA      (1UL << 20)
+#define FATTR4_WORD1_TIME_MODIFY        (1UL << 21)
+#define FATTR4_WORD1_TIME_MODIFY_SET    (1UL << 22)
+#define FATTR4_WORD1_MOUNTED_ON_FILEID  (1UL << 23)
+#define FATTR4_WORD1_FS_LAYOUT_TYPES    (1UL << 30)
+#define FATTR4_WORD2_LAYOUT_BLKSIZE     (1UL << 1)
+
+#define NFSPROC4_NULL 0
+#define NFSPROC4_COMPOUND 1
+#define NFS4_VERSION 4
+#define NFS4_MINOR_VERSION 0
+
+#if defined(CONFIG_NFS_V4_1)
+#define NFS4_MAX_MINOR_VERSION 1
+#else
+#define NFS4_MAX_MINOR_VERSION 0
+#endif /* CONFIG_NFS_V4_1 */
+
+#define NFS4_DEBUG 1
+
+/* Index of predefined Linux client operations */
+
+enum {
+	NFSPROC4_CLNT_NULL = 0,		/* Unused */
+	NFSPROC4_CLNT_READ,
+	NFSPROC4_CLNT_WRITE,
+	NFSPROC4_CLNT_COMMIT,
+	NFSPROC4_CLNT_OPEN,
+	NFSPROC4_CLNT_OPEN_CONFIRM,
+	NFSPROC4_CLNT_OPEN_NOATTR,
+	NFSPROC4_CLNT_OPEN_DOWNGRADE,
+	NFSPROC4_CLNT_CLOSE,
+	NFSPROC4_CLNT_SETATTR,
+	NFSPROC4_CLNT_FSINFO,
+	NFSPROC4_CLNT_RENEW,
+	NFSPROC4_CLNT_SETCLIENTID,
+	NFSPROC4_CLNT_SETCLIENTID_CONFIRM,
+	NFSPROC4_CLNT_LOCK,
+	NFSPROC4_CLNT_LOCKT,
+	NFSPROC4_CLNT_LOCKU,
+	NFSPROC4_CLNT_ACCESS,
+	NFSPROC4_CLNT_GETATTR,
+	NFSPROC4_CLNT_LOOKUP,
+	NFSPROC4_CLNT_LOOKUP_ROOT,
+	NFSPROC4_CLNT_REMOVE,
+	NFSPROC4_CLNT_RENAME,
+	NFSPROC4_CLNT_LINK,
+	NFSPROC4_CLNT_SYMLINK,
+	NFSPROC4_CLNT_CREATE,
+	NFSPROC4_CLNT_PATHCONF,
+	NFSPROC4_CLNT_STATFS,
+	NFSPROC4_CLNT_READLINK,
+	NFSPROC4_CLNT_READDIR,
+	NFSPROC4_CLNT_SERVER_CAPS,
+	NFSPROC4_CLNT_DELEGRETURN,
+	NFSPROC4_CLNT_GETACL,
+	NFSPROC4_CLNT_SETACL,
+	NFSPROC4_CLNT_FS_LOCATIONS,
+	NFSPROC4_CLNT_RELEASE_LOCKOWNER,
+	NFSPROC4_CLNT_SECINFO,
+
+	/* nfs41 */
+	NFSPROC4_CLNT_EXCHANGE_ID,
+	NFSPROC4_CLNT_CREATE_SESSION,
+	NFSPROC4_CLNT_DESTROY_SESSION,
+	NFSPROC4_CLNT_SEQUENCE,
+	NFSPROC4_CLNT_GET_LEASE_TIME,
+	NFSPROC4_CLNT_RECLAIM_COMPLETE,
+	NFSPROC4_CLNT_LAYOUTGET,
+	NFSPROC4_CLNT_GETDEVICEINFO,
+	NFSPROC4_CLNT_LAYOUTCOMMIT,
+	NFSPROC4_CLNT_LAYOUTRETURN,
+	NFSPROC4_CLNT_SECINFO_NO_NAME,
+	NFSPROC4_CLNT_TEST_STATEID,
+	NFSPROC4_CLNT_FREE_STATEID,
+	NFSPROC4_CLNT_GETDEVICELIST,
+};
+
+/* nfs41 types */
+struct nfs4_sessionid {
+	unsigned char data[NFS4_MAX_SESSIONID_LEN];
+};
+
+/* Create Session Flags */
+#define SESSION4_PERSIST	0x001
+#define SESSION4_BACK_CHAN	0x002
+#define SESSION4_RDMA		0x004
+
+#define SESSION4_FLAG_MASK_A	0x007
+
+enum state_protect_how4 {
+	SP4_NONE	= 0,
+	SP4_MACH_CRED	= 1,
+	SP4_SSV		= 2
+};
+
+enum pnfs_layouttype {
+	LAYOUT_NFSV4_1_FILES  = 1,
+	LAYOUT_OSD2_OBJECTS = 2,
+	LAYOUT_BLOCK_VOLUME = 3,
+};
+
+/* used for both layout return and recall */
+enum pnfs_layoutreturn_type {
+	RETURN_FILE = 1,
+	RETURN_FSID = 2,
+	RETURN_ALL  = 3
+};
+
+enum pnfs_iomode {
+	IOMODE_READ = 1,
+	IOMODE_RW = 2,
+	IOMODE_ANY = 3,
+};
+
+enum pnfs_notify_deviceid_type4 {
+	NOTIFY_DEVICEID4_CHANGE = 1 << 1,
+	NOTIFY_DEVICEID4_DELETE = 1 << 2,
+};
+
+#define NFL4_UFLG_MASK			0x0000003F
+#define NFL4_UFLG_DENSE			0x00000001
+#define NFL4_UFLG_COMMIT_THRU_MDS	0x00000002
+#define NFL4_UFLG_STRIPE_UNIT_SIZE_MASK	0xFFFFFFC0
+
+/* Encoded in the loh_body field of type layouthint4 */
+enum filelayout_hint_care4 {
+	NFLH4_CARE_DENSE		= NFL4_UFLG_DENSE,
+	NFLH4_CARE_COMMIT_THRU_MDS	= NFL4_UFLG_COMMIT_THRU_MDS,
+	NFLH4_CARE_STRIPE_UNIT_SIZE	= 0x00000040,
+	NFLH4_CARE_STRIPE_COUNT		= 0x00000080
+};
+
+#define NFS4_DEVICEID4_SIZE 16
+
+struct nfs4_deviceid {
+	char data[NFS4_DEVICEID4_SIZE];
+};
+
+#endif
+#endif
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ * End:
+ */
diff --git a/include/linux/nfs4_mount.h b/include/linux/nfs4_mount.h
new file mode 100644
index 00000000..a0dcf665
--- /dev/null
+++ b/include/linux/nfs4_mount.h
@@ -0,0 +1,71 @@
+#ifndef _LINUX_NFS4_MOUNT_H
+#define _LINUX_NFS4_MOUNT_H
+
+/*
+ *  linux/include/linux/nfs4_mount.h
+ *
+ *  Copyright (C) 2002  Trond Myklebust
+ *
+ *  structure passed from user-space to kernel-space during an nfsv4 mount
+ */
+
+/*
+ * WARNING!  Do not delete or change the order of these fields.  If
+ * a new field is required then add it to the end.  The version field
+ * tracks which fields are present.  This will ensure some measure of
+ * mount-to-kernel version compatibility.  Some of these aren't used yet
+ * but here they are anyway.
+ */
+#define NFS4_MOUNT_VERSION	1
+
+struct nfs_string {
+	unsigned int len;
+	const char __user * data;
+};
+
+struct nfs4_mount_data {
+	int version;				/* 1 */
+	int flags;				/* 1 */
+	int rsize;				/* 1 */
+	int wsize;				/* 1 */
+	int timeo;				/* 1 */
+	int retrans;				/* 1 */
+	int acregmin;				/* 1 */
+	int acregmax;				/* 1 */
+	int acdirmin;				/* 1 */
+	int acdirmax;				/* 1 */
+
+	/* see the definition of 'struct clientaddr4' in RFC3010 */
+	struct nfs_string client_addr;		/* 1 */
+
+	/* Mount path */
+	struct nfs_string mnt_path;		/* 1 */
+
+	/* Server details */
+	struct nfs_string hostname;		/* 1 */
+	/* Server IP address */
+	unsigned int host_addrlen;		/* 1 */
+	struct sockaddr __user * host_addr;	/* 1 */
+
+	/* Transport protocol to use */
+	int proto;				/* 1 */
+
+	/* Pseudo-flavours to use for authentication. See RFC2623 */
+	int auth_flavourlen;			/* 1 */
+	int __user *auth_flavours;		/* 1 */
+};
+
+/* bits in the flags field */
+/* Note: the fields that correspond to existing NFSv2/v3 mount options
+ * 	 should mirror the values from include/linux/nfs_mount.h
+ */
+
+#define NFS4_MOUNT_SOFT		0x0001	/* 1 */
+#define NFS4_MOUNT_INTR		0x0002	/* 1 */
+#define NFS4_MOUNT_NOCTO	0x0010	/* 1 */
+#define NFS4_MOUNT_NOAC		0x0020	/* 1 */
+#define NFS4_MOUNT_STRICTLOCK	0x1000	/* 1 */
+#define NFS4_MOUNT_UNSHARED	0x8000	/* 1 */
+#define NFS4_MOUNT_FLAGMASK	0x9033
+
+#endif
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
new file mode 100644
index 00000000..52a1bdb4
--- /dev/null
+++ b/include/linux/nfs_fs.h
@@ -0,0 +1,671 @@
+/*
+ *  linux/include/linux/nfs_fs.h
+ *
+ *  Copyright (C) 1992  Rick Sladkey
+ *
+ *  OS-specific nfs filesystem definitions and declarations
+ */
+
+#ifndef _LINUX_NFS_FS_H
+#define _LINUX_NFS_FS_H
+
+#include <linux/magic.h>
+
+/* Default timeout values */
+#define NFS_DEF_UDP_TIMEO	(11)
+#define NFS_DEF_UDP_RETRANS	(3)
+#define NFS_DEF_TCP_TIMEO	(600)
+#define NFS_DEF_TCP_RETRANS	(2)
+
+#define NFS_MAX_UDP_TIMEOUT	(60*HZ)
+#define NFS_MAX_TCP_TIMEOUT	(600*HZ)
+
+#define NFS_DEF_ACREGMIN	(3)
+#define NFS_DEF_ACREGMAX	(60)
+#define NFS_DEF_ACDIRMIN	(30)
+#define NFS_DEF_ACDIRMAX	(60)
+
+/*
+ * When flushing a cluster of dirty pages, there can be different
+ * strategies:
+ */
+#define FLUSH_SYNC		1	/* file being synced, or contention */
+#define FLUSH_STABLE		4	/* commit to stable storage */
+#define FLUSH_LOWPRI		8	/* low priority background flush */
+#define FLUSH_HIGHPRI		16	/* high priority memory reclaim flush */
+#define FLUSH_COND_STABLE	32	/* conditional stable write - only stable
+					 * if everything fits in one RPC */
+
+#ifdef __KERNEL__
+
+/*
+ * Enable dprintk() debugging support for nfs client.
+ */
+#ifdef CONFIG_NFS_DEBUG
+# define NFS_DEBUG
+#endif
+
+#include <linux/in.h>
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+#include <linux/rbtree.h>
+#include <linux/rwsem.h>
+#include <linux/wait.h>
+
+#include <linux/sunrpc/debug.h>
+#include <linux/sunrpc/auth.h>
+#include <linux/sunrpc/clnt.h>
+
+#include <linux/nfs.h>
+#include <linux/nfs2.h>
+#include <linux/nfs3.h>
+#include <linux/nfs4.h>
+#include <linux/nfs_xdr.h>
+#include <linux/nfs_fs_sb.h>
+
+#include <linux/mempool.h>
+
+/*
+ * These are the default flags for swap requests
+ */
+#define NFS_RPC_SWAPFLAGS		(RPC_TASK_SWAPPER|RPC_TASK_ROOTCREDS)
+
+/*
+ * NFSv3/v4 Access mode cache entry
+ */
+struct nfs_access_entry {
+	struct rb_node		rb_node;
+	struct list_head	lru;
+	unsigned long		jiffies;
+	struct rpc_cred *	cred;
+	int			mask;
+};
+
+struct nfs_lock_context {
+	atomic_t count;
+	struct list_head list;
+	struct nfs_open_context *open_context;
+	fl_owner_t lockowner;
+	pid_t pid;
+};
+
+struct nfs4_state;
+struct nfs_open_context {
+	struct nfs_lock_context lock_context;
+	struct dentry *dentry;
+	struct rpc_cred *cred;
+	struct nfs4_state *state;
+	fmode_t mode;
+
+	unsigned long flags;
+#define NFS_CONTEXT_ERROR_WRITE		(0)
+	int error;
+
+	struct list_head list;
+};
+
+struct nfs_open_dir_context {
+	struct rpc_cred *cred;
+	unsigned long attr_gencount;
+	__u64 dir_cookie;
+	__u64 dup_cookie;
+	signed char duped;
+};
+
+/*
+ * NFSv4 delegation
+ */
+struct nfs_delegation;
+
+struct posix_acl;
+
+/*
+ * nfs fs inode data in memory
+ */
+struct nfs_inode {
+	/*
+	 * The 64bit 'inode number'
+	 */
+	__u64 fileid;
+
+	/*
+	 * NFS file handle
+	 */
+	struct nfs_fh		fh;
+
+	/*
+	 * Various flags
+	 */
+	unsigned long		flags;			/* atomic bit ops */
+	unsigned long		cache_validity;		/* bit mask */
+
+	/*
+	 * read_cache_jiffies is when we started read-caching this inode.
+	 * attrtimeo is for how long the cached information is assumed
+	 * to be valid. A successful attribute revalidation doubles
+	 * attrtimeo (up to acregmax/acdirmax), a failure resets it to
+	 * acregmin/acdirmin.
+	 *
+	 * We need to revalidate the cached attrs for this inode if
+	 *
+	 *	jiffies - read_cache_jiffies >= attrtimeo
+	 *
+	 * Please note the comparison is greater than or equal
+	 * so that zero timeout values can be specified.
+	 */
+	unsigned long		read_cache_jiffies;
+	unsigned long		attrtimeo;
+	unsigned long		attrtimeo_timestamp;
+
+	unsigned long		attr_gencount;
+	/* "Generation counter" for the attribute cache. This is
+	 * bumped whenever we update the metadata on the
+	 * server.
+	 */
+	unsigned long		cache_change_attribute;
+
+	struct rb_root		access_cache;
+	struct list_head	access_cache_entry_lru;
+	struct list_head	access_cache_inode_lru;
+#ifdef CONFIG_NFS_V3_ACL
+	struct posix_acl	*acl_access;
+	struct posix_acl	*acl_default;
+#endif
+
+	/*
+	 * This is the cookie verifier used for NFSv3 readdir
+	 * operations
+	 */
+	__be32			cookieverf[2];
+
+	unsigned long		npages;
+	unsigned long		ncommit;
+	struct list_head	commit_list;
+
+	/* Open contexts for shared mmap writes */
+	struct list_head	open_files;
+
+	/* Number of in-flight sillydelete RPC calls */
+	atomic_t		silly_count;
+	/* List of deferred sillydelete requests */
+	struct hlist_head	silly_list;
+	wait_queue_head_t	waitqueue;
+
+#ifdef CONFIG_NFS_V4
+	struct nfs4_cached_acl	*nfs4_acl;
+        /* NFSv4 state */
+	struct list_head	open_states;
+	struct nfs_delegation __rcu *delegation;
+	fmode_t			 delegation_state;
+	struct rw_semaphore	rwsem;
+
+	/* pNFS layout information */
+	struct pnfs_layout_hdr *layout;
+	atomic_t		commits_outstanding;
+#endif /* CONFIG_NFS_V4*/
+#ifdef CONFIG_NFS_FSCACHE
+	struct fscache_cookie	*fscache;
+#endif
+	struct inode		vfs_inode;
+};
+
+/*
+ * Cache validity bit flags
+ */
+#define NFS_INO_INVALID_ATTR	0x0001		/* cached attrs are invalid */
+#define NFS_INO_INVALID_DATA	0x0002		/* cached data is invalid */
+#define NFS_INO_INVALID_ATIME	0x0004		/* cached atime is invalid */
+#define NFS_INO_INVALID_ACCESS	0x0008		/* cached access cred invalid */
+#define NFS_INO_INVALID_ACL	0x0010		/* cached acls are invalid */
+#define NFS_INO_REVAL_PAGECACHE	0x0020		/* must revalidate pagecache */
+#define NFS_INO_REVAL_FORCED	0x0040		/* force revalidation ignoring a delegation */
+
+/*
+ * Bit offsets in flags field
+ */
+#define NFS_INO_ADVISE_RDPLUS	(0)		/* advise readdirplus */
+#define NFS_INO_STALE		(1)		/* possible stale inode */
+#define NFS_INO_ACL_LRU_SET	(2)		/* Inode is on the LRU list */
+#define NFS_INO_FLUSHING	(4)		/* inode is flushing out data */
+#define NFS_INO_FSCACHE		(5)		/* inode can be cached by FS-Cache */
+#define NFS_INO_FSCACHE_LOCK	(6)		/* FS-Cache cookie management lock */
+#define NFS_INO_COMMIT		(7)		/* inode is committing unstable writes */
+#define NFS_INO_PNFS_COMMIT	(8)		/* use pnfs code for commit */
+#define NFS_INO_LAYOUTCOMMIT	(9)		/* layoutcommit required */
+#define NFS_INO_LAYOUTCOMMITTING (10)		/* layoutcommit inflight */
+
+static inline struct nfs_inode *NFS_I(const struct inode *inode)
+{
+	return container_of(inode, struct nfs_inode, vfs_inode);
+}
+
+static inline struct nfs_server *NFS_SB(const struct super_block *s)
+{
+	return (struct nfs_server *)(s->s_fs_info);
+}
+
+static inline struct nfs_fh *NFS_FH(const struct inode *inode)
+{
+	return &NFS_I(inode)->fh;
+}
+
+static inline struct nfs_server *NFS_SERVER(const struct inode *inode)
+{
+	return NFS_SB(inode->i_sb);
+}
+
+static inline struct rpc_clnt *NFS_CLIENT(const struct inode *inode)
+{
+	return NFS_SERVER(inode)->client;
+}
+
+static inline const struct nfs_rpc_ops *NFS_PROTO(const struct inode *inode)
+{
+	return NFS_SERVER(inode)->nfs_client->rpc_ops;
+}
+
+static inline __be32 *NFS_COOKIEVERF(const struct inode *inode)
+{
+	return NFS_I(inode)->cookieverf;
+}
+
+static inline unsigned NFS_MINATTRTIMEO(const struct inode *inode)
+{
+	struct nfs_server *nfss = NFS_SERVER(inode);
+	return S_ISDIR(inode->i_mode) ? nfss->acdirmin : nfss->acregmin;
+}
+
+static inline unsigned NFS_MAXATTRTIMEO(const struct inode *inode)
+{
+	struct nfs_server *nfss = NFS_SERVER(inode);
+	return S_ISDIR(inode->i_mode) ? nfss->acdirmax : nfss->acregmax;
+}
+
+static inline int NFS_STALE(const struct inode *inode)
+{
+	return test_bit(NFS_INO_STALE, &NFS_I(inode)->flags);
+}
+
+static inline int NFS_FSCACHE(const struct inode *inode)
+{
+	return test_bit(NFS_INO_FSCACHE, &NFS_I(inode)->flags);
+}
+
+static inline __u64 NFS_FILEID(const struct inode *inode)
+{
+	return NFS_I(inode)->fileid;
+}
+
+static inline void set_nfs_fileid(struct inode *inode, __u64 fileid)
+{
+	NFS_I(inode)->fileid = fileid;
+}
+
+static inline void nfs_mark_for_revalidate(struct inode *inode)
+{
+	struct nfs_inode *nfsi = NFS_I(inode);
+
+	spin_lock(&inode->i_lock);
+	nfsi->cache_validity |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_ACCESS;
+	if (S_ISDIR(inode->i_mode))
+		nfsi->cache_validity |= NFS_INO_REVAL_PAGECACHE|NFS_INO_INVALID_DATA;
+	spin_unlock(&inode->i_lock);
+}
+
+static inline int nfs_server_capable(struct inode *inode, int cap)
+{
+	return NFS_SERVER(inode)->caps & cap;
+}
+
+static inline int NFS_USE_READDIRPLUS(struct inode *inode)
+{
+	return test_bit(NFS_INO_ADVISE_RDPLUS, &NFS_I(inode)->flags);
+}
+
+static inline void nfs_set_verifier(struct dentry * dentry, unsigned long verf)
+{
+	dentry->d_time = verf;
+}
+
+/**
+ * nfs_save_change_attribute - Returns the inode attribute change cookie
+ * @dir - pointer to parent directory inode
+ * The "change attribute" is updated every time we finish an operation
+ * that will result in a metadata change on the server.
+ */
+static inline unsigned long nfs_save_change_attribute(struct inode *dir)
+{
+	return NFS_I(dir)->cache_change_attribute;
+}
+
+/**
+ * nfs_verify_change_attribute - Detects NFS remote directory changes
+ * @dir - pointer to parent directory inode
+ * @chattr - previously saved change attribute
+ * Return "false" if the verifiers doesn't match the change attribute.
+ * This would usually indicate that the directory contents have changed on
+ * the server, and that any dentries need revalidating.
+ */
+static inline int nfs_verify_change_attribute(struct inode *dir, unsigned long chattr)
+{
+	return chattr == NFS_I(dir)->cache_change_attribute;
+}
+
+/*
+ * linux/fs/nfs/inode.c
+ */
+extern int nfs_sync_mapping(struct address_space *mapping);
+extern void nfs_zap_mapping(struct inode *inode, struct address_space *mapping);
+extern void nfs_zap_caches(struct inode *);
+extern void nfs_invalidate_atime(struct inode *);
+extern struct inode *nfs_fhget(struct super_block *, struct nfs_fh *,
+				struct nfs_fattr *);
+extern int nfs_refresh_inode(struct inode *, struct nfs_fattr *);
+extern int nfs_post_op_update_inode(struct inode *inode, struct nfs_fattr *fattr);
+extern int nfs_post_op_update_inode_force_wcc(struct inode *inode, struct nfs_fattr *fattr);
+extern int nfs_getattr(struct vfsmount *, struct dentry *, struct kstat *);
+extern int nfs_permission(struct inode *, int);
+extern int nfs_open(struct inode *, struct file *);
+extern int nfs_release(struct inode *, struct file *);
+extern int nfs_attribute_timeout(struct inode *inode);
+extern int nfs_revalidate_inode(struct nfs_server *server, struct inode *inode);
+extern int __nfs_revalidate_inode(struct nfs_server *, struct inode *);
+extern int nfs_revalidate_mapping(struct inode *inode, struct address_space *mapping);
+extern int nfs_setattr(struct dentry *, struct iattr *);
+extern void nfs_setattr_update_inode(struct inode *inode, struct iattr *attr);
+extern struct nfs_open_context *get_nfs_open_context(struct nfs_open_context *ctx);
+extern void put_nfs_open_context(struct nfs_open_context *ctx);
+extern struct nfs_open_context *nfs_find_open_context(struct inode *inode, struct rpc_cred *cred, fmode_t mode);
+extern struct nfs_open_context *alloc_nfs_open_context(struct dentry *dentry, fmode_t f_mode);
+extern void nfs_file_set_open_context(struct file *filp, struct nfs_open_context *ctx);
+extern struct nfs_lock_context *nfs_get_lock_context(struct nfs_open_context *ctx);
+extern void nfs_put_lock_context(struct nfs_lock_context *l_ctx);
+extern u64 nfs_compat_user_ino64(u64 fileid);
+extern void nfs_fattr_init(struct nfs_fattr *fattr);
+extern unsigned long nfs_inc_attr_generation_counter(void);
+
+extern struct nfs_fattr *nfs_alloc_fattr(void);
+
+static inline void nfs_free_fattr(const struct nfs_fattr *fattr)
+{
+	kfree(fattr);
+}
+
+extern struct nfs_fh *nfs_alloc_fhandle(void);
+
+static inline void nfs_free_fhandle(const struct nfs_fh *fh)
+{
+	kfree(fh);
+}
+
+#ifdef NFS_DEBUG
+extern u32 _nfs_display_fhandle_hash(const struct nfs_fh *fh);
+static inline u32 nfs_display_fhandle_hash(const struct nfs_fh *fh)
+{
+	return _nfs_display_fhandle_hash(fh);
+}
+extern void _nfs_display_fhandle(const struct nfs_fh *fh, const char *caption);
+#define nfs_display_fhandle(fh, caption)			\
+	do {							\
+		if (unlikely(nfs_debug & NFSDBG_FACILITY))	\
+			_nfs_display_fhandle(fh, caption);	\
+	} while (0)
+#else
+static inline u32 nfs_display_fhandle_hash(const struct nfs_fh *fh)
+{
+	return 0;
+}
+static inline void nfs_display_fhandle(const struct nfs_fh *fh,
+				       const char *caption)
+{
+}
+#endif
+
+/*
+ * linux/fs/nfs/nfsroot.c
+ */
+extern int  nfs_root_data(char **root_device, char **root_data); /*__init*/
+/* linux/net/ipv4/ipconfig.c: trims ip addr off front of name, too. */
+extern __be32 root_nfs_parse_addr(char *name); /*__init*/
+
+/*
+ * linux/fs/nfs/file.c
+ */
+extern const struct inode_operations nfs_file_inode_operations;
+#ifdef CONFIG_NFS_V3
+extern const struct inode_operations nfs3_file_inode_operations;
+#endif /* CONFIG_NFS_V3 */
+extern const struct file_operations nfs_file_operations;
+#ifdef CONFIG_NFS_V4
+extern const struct file_operations nfs4_file_operations;
+#endif /* CONFIG_NFS_V4 */
+extern const struct address_space_operations nfs_file_aops;
+extern const struct address_space_operations nfs_dir_aops;
+
+static inline struct nfs_open_context *nfs_file_open_context(struct file *filp)
+{
+	return filp->private_data;
+}
+
+static inline struct rpc_cred *nfs_file_cred(struct file *file)
+{
+	if (file != NULL) {
+		struct nfs_open_context *ctx =
+			nfs_file_open_context(file);
+		if (ctx)
+			return ctx->cred;
+	}
+	return NULL;
+}
+
+/*
+ * linux/fs/nfs/xattr.c
+ */
+#ifdef CONFIG_NFS_V3_ACL
+extern ssize_t nfs3_listxattr(struct dentry *, char *, size_t);
+extern ssize_t nfs3_getxattr(struct dentry *, const char *, void *, size_t);
+extern int nfs3_setxattr(struct dentry *, const char *,
+			const void *, size_t, int);
+extern int nfs3_removexattr (struct dentry *, const char *name);
+#else
+# define nfs3_listxattr NULL
+# define nfs3_getxattr NULL
+# define nfs3_setxattr NULL
+# define nfs3_removexattr NULL
+#endif
+
+/*
+ * linux/fs/nfs/direct.c
+ */
+extern ssize_t nfs_direct_IO(int, struct kiocb *, const struct iovec *, loff_t,
+			unsigned long);
+extern ssize_t nfs_file_direct_read(struct kiocb *iocb,
+			const struct iovec *iov, unsigned long nr_segs,
+			loff_t pos);
+extern ssize_t nfs_file_direct_write(struct kiocb *iocb,
+			const struct iovec *iov, unsigned long nr_segs,
+			loff_t pos);
+
+/*
+ * linux/fs/nfs/dir.c
+ */
+extern const struct inode_operations nfs_dir_inode_operations;
+#ifdef CONFIG_NFS_V3
+extern const struct inode_operations nfs3_dir_inode_operations;
+#endif /* CONFIG_NFS_V3 */
+extern const struct file_operations nfs_dir_operations;
+extern const struct dentry_operations nfs_dentry_operations;
+
+extern void nfs_force_lookup_revalidate(struct inode *dir);
+extern int nfs_instantiate(struct dentry *dentry, struct nfs_fh *fh, struct nfs_fattr *fattr);
+extern int nfs_may_open(struct inode *inode, struct rpc_cred *cred, int openflags);
+extern void nfs_access_zap_cache(struct inode *inode);
+
+/*
+ * linux/fs/nfs/symlink.c
+ */
+extern const struct inode_operations nfs_symlink_inode_operations;
+
+/*
+ * linux/fs/nfs/sysctl.c
+ */
+#ifdef CONFIG_SYSCTL
+extern int nfs_register_sysctl(void);
+extern void nfs_unregister_sysctl(void);
+#else
+#define nfs_register_sysctl() 0
+#define nfs_unregister_sysctl() do { } while(0)
+#endif
+
+/*
+ * linux/fs/nfs/namespace.c
+ */
+extern const struct inode_operations nfs_mountpoint_inode_operations;
+extern const struct inode_operations nfs_referral_inode_operations;
+extern int nfs_mountpoint_expiry_timeout;
+extern void nfs_release_automount_timer(void);
+
+/*
+ * linux/fs/nfs/unlink.c
+ */
+extern void nfs_complete_unlink(struct dentry *dentry, struct inode *);
+extern void nfs_block_sillyrename(struct dentry *dentry);
+extern void nfs_unblock_sillyrename(struct dentry *dentry);
+extern int  nfs_sillyrename(struct inode *dir, struct dentry *dentry);
+
+/*
+ * linux/fs/nfs/write.c
+ */
+extern int  nfs_congestion_kb;
+extern int  nfs_writepage(struct page *page, struct writeback_control *wbc);
+extern int  nfs_writepages(struct address_space *, struct writeback_control *);
+extern int  nfs_flush_incompatible(struct file *file, struct page *page);
+extern int  nfs_updatepage(struct file *, struct page *, unsigned int, unsigned int);
+extern void nfs_writeback_done(struct rpc_task *, struct nfs_write_data *);
+
+/*
+ * Try to write back everything synchronously (but check the
+ * return value!)
+ */
+extern int nfs_wb_all(struct inode *inode);
+extern int nfs_wb_page(struct inode *inode, struct page* page);
+extern int nfs_wb_page_cancel(struct inode *inode, struct page* page);
+#if defined(CONFIG_NFS_V3) || defined(CONFIG_NFS_V4)
+extern int  nfs_commit_inode(struct inode *, int);
+extern struct nfs_write_data *nfs_commitdata_alloc(void);
+extern void nfs_commit_free(struct nfs_write_data *wdata);
+#else
+static inline int
+nfs_commit_inode(struct inode *inode, int how)
+{
+	return 0;
+}
+#endif
+
+static inline int
+nfs_have_writebacks(struct inode *inode)
+{
+	return NFS_I(inode)->npages != 0;
+}
+
+/*
+ * Allocate nfs_write_data structures
+ */
+extern struct nfs_write_data *nfs_writedata_alloc(unsigned int npages);
+extern void nfs_writedata_free(struct nfs_write_data *);
+
+/*
+ * linux/fs/nfs/read.c
+ */
+extern int  nfs_readpage(struct file *, struct page *);
+extern int  nfs_readpages(struct file *, struct address_space *,
+		struct list_head *, unsigned);
+extern int  nfs_readpage_result(struct rpc_task *, struct nfs_read_data *);
+extern int  nfs_readpage_async(struct nfs_open_context *, struct inode *,
+			       struct page *);
+
+/*
+ * Allocate nfs_read_data structures
+ */
+extern struct nfs_read_data *nfs_readdata_alloc(unsigned int npages);
+extern void nfs_readdata_free(struct nfs_read_data *);
+
+/*
+ * linux/fs/nfs3proc.c
+ */
+#ifdef CONFIG_NFS_V3_ACL
+extern struct posix_acl *nfs3_proc_getacl(struct inode *inode, int type);
+extern int nfs3_proc_setacl(struct inode *inode, int type,
+			    struct posix_acl *acl);
+extern int nfs3_proc_set_default_acl(struct inode *dir, struct inode *inode,
+		umode_t mode);
+extern void nfs3_forget_cached_acls(struct inode *inode);
+#else
+static inline int nfs3_proc_set_default_acl(struct inode *dir,
+					    struct inode *inode,
+					    umode_t mode)
+{
+	return 0;
+}
+
+static inline void nfs3_forget_cached_acls(struct inode *inode)
+{
+}
+#endif /* CONFIG_NFS_V3_ACL */
+
+/*
+ * inline functions
+ */
+
+static inline loff_t nfs_size_to_loff_t(__u64 size)
+{
+	if (size > (__u64) OFFSET_MAX - 1)
+		return OFFSET_MAX - 1;
+	return (loff_t) size;
+}
+
+static inline ino_t
+nfs_fileid_to_ino_t(u64 fileid)
+{
+	ino_t ino = (ino_t) fileid;
+	if (sizeof(ino_t) < sizeof(u64))
+		ino ^= fileid >> (sizeof(u64)-sizeof(ino_t)) * 8;
+	return ino;
+}
+
+#define NFS_JUKEBOX_RETRY_TIME (5 * HZ)
+
+#endif /* __KERNEL__ */
+
+/*
+ * NFS debug flags
+ */
+#define NFSDBG_VFS		0x0001
+#define NFSDBG_DIRCACHE		0x0002
+#define NFSDBG_LOOKUPCACHE	0x0004
+#define NFSDBG_PAGECACHE	0x0008
+#define NFSDBG_PROC		0x0010
+#define NFSDBG_XDR		0x0020
+#define NFSDBG_FILE		0x0040
+#define NFSDBG_ROOT		0x0080
+#define NFSDBG_CALLBACK		0x0100
+#define NFSDBG_CLIENT		0x0200
+#define NFSDBG_MOUNT		0x0400
+#define NFSDBG_FSCACHE		0x0800
+#define NFSDBG_PNFS		0x1000
+#define NFSDBG_PNFS_LD		0x2000
+#define NFSDBG_ALL		0xFFFF
+
+#ifdef __KERNEL__
+
+# undef ifdebug
+# ifdef NFS_DEBUG
+#  define ifdebug(fac)		if (unlikely(nfs_debug & NFSDBG_##fac))
+#  define NFS_IFDEBUG(x)	x
+# else
+#  define ifdebug(fac)		if (0)
+#  define NFS_IFDEBUG(x)
+# endif
+#endif /* __KERNEL */
+
+#endif
diff --git a/include/linux/nfs_fs_i.h b/include/linux/nfs_fs_i.h
new file mode 100644
index 00000000..a5c50d97
--- /dev/null
+++ b/include/linux/nfs_fs_i.h
@@ -0,0 +1,20 @@
+#ifndef _NFS_FS_I
+#define _NFS_FS_I
+
+struct nlm_lockowner;
+
+/*
+ * NFS lock info
+ */
+struct nfs_lock_info {
+	u32		state;
+	struct nlm_lockowner *owner;
+	struct list_head list;
+};
+
+struct nfs4_lock_state;
+struct nfs4_lock_info {
+	struct nfs4_lock_state *owner;
+};
+
+#endif
diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h
new file mode 100644
index 00000000..7073fc74
--- /dev/null
+++ b/include/linux/nfs_fs_sb.h
@@ -0,0 +1,243 @@
+#ifndef _NFS_FS_SB
+#define _NFS_FS_SB
+
+#include <linux/list.h>
+#include <linux/backing-dev.h>
+#include <linux/idr.h>
+#include <linux/wait.h>
+#include <linux/nfs_xdr.h>
+#include <linux/sunrpc/xprt.h>
+
+#include <linux/atomic.h>
+
+struct nfs4_session;
+struct nfs_iostats;
+struct nlm_host;
+struct nfs4_sequence_args;
+struct nfs4_sequence_res;
+struct nfs_server;
+struct nfs4_minor_version_ops;
+struct server_scope;
+struct nfs41_impl_id;
+
+/*
+ * The nfs_client identifies our client state to the server.
+ */
+struct nfs_client {
+	atomic_t		cl_count;
+	int			cl_cons_state;	/* current construction state (-ve: init error) */
+#define NFS_CS_READY		0		/* ready to be used */
+#define NFS_CS_INITING		1		/* busy initialising */
+#define NFS_CS_SESSION_INITING	2		/* busy initialising  session */
+	unsigned long		cl_res_state;	/* NFS resources state */
+#define NFS_CS_CALLBACK		1		/* - callback started */
+#define NFS_CS_IDMAP		2		/* - idmap started */
+#define NFS_CS_RENEWD		3		/* - renewd started */
+#define NFS_CS_STOP_RENEW	4		/* no more state to renew */
+#define NFS_CS_CHECK_LEASE_TIME	5		/* need to check lease time */
+	struct sockaddr_storage	cl_addr;	/* server identifier */
+	size_t			cl_addrlen;
+	char *			cl_hostname;	/* hostname of server */
+	struct list_head	cl_share_link;	/* link in global client list */
+	struct list_head	cl_superblocks;	/* List of nfs_server structs */
+
+	struct rpc_clnt *	cl_rpcclient;
+	const struct nfs_rpc_ops *rpc_ops;	/* NFS protocol vector */
+	int			cl_proto;	/* Network transport protocol */
+
+	u32			cl_minorversion;/* NFSv4 minorversion */
+	struct rpc_cred		*cl_machine_cred;
+
+#ifdef CONFIG_NFS_V4
+	u64			cl_clientid;	/* constant */
+	nfs4_verifier		cl_confirm;	/* Clientid verifier */
+	unsigned long		cl_state;
+
+	spinlock_t		cl_lock;
+
+	unsigned long		cl_lease_time;
+	unsigned long		cl_last_renewal;
+	struct delayed_work	cl_renewd;
+
+	struct rpc_wait_queue	cl_rpcwaitq;
+
+	/* used for the setclientid verifier */
+	struct timespec		cl_boot_time;
+
+	/* idmapper */
+	struct idmap *		cl_idmap;
+
+	/* Our own IP address, as a null-terminated string.
+	 * This is used to generate the clientid, and the callback address.
+	 */
+	char			cl_ipaddr[48];
+	unsigned char		cl_id_uniquifier;
+	u32			cl_cb_ident;	/* v4.0 callback identifier */
+	const struct nfs4_minor_version_ops *cl_mvops;
+
+	/* The sequence id to use for the next CREATE_SESSION */
+	u32			cl_seqid;
+	/* The flags used for obtaining the clientid during EXCHANGE_ID */
+	u32			cl_exchange_flags;
+	struct nfs4_session	*cl_session; 	/* sharred session */
+#endif /* CONFIG_NFS_V4 */
+
+#ifdef CONFIG_NFS_FSCACHE
+	struct fscache_cookie	*fscache;	/* client index cache cookie */
+#endif
+
+	struct server_scope	*server_scope;	/* from exchange_id */
+	struct nfs41_impl_id	*impl_id;	/* from exchange_id */
+	struct net		*net;
+};
+
+/*
+ * NFS client parameters stored in the superblock.
+ */
+struct nfs_server {
+	struct nfs_client *	nfs_client;	/* shared client and NFS4 state */
+	struct list_head	client_link;	/* List of other nfs_server structs
+						 * that share the same client
+						 */
+	struct list_head	master_link;	/* link in master servers list */
+	struct rpc_clnt *	client;		/* RPC client handle */
+	struct rpc_clnt *	client_acl;	/* ACL RPC client handle */
+	struct nlm_host		*nlm_host;	/* NLM client handle */
+	struct nfs_iostats __percpu *io_stats;	/* I/O statistics */
+	struct backing_dev_info	backing_dev_info;
+	atomic_long_t		writeback;	/* number of writeback pages */
+	int			flags;		/* various flags */
+	unsigned int		caps;		/* server capabilities */
+	unsigned int		rsize;		/* read size */
+	unsigned int		rpages;		/* read size (in pages) */
+	unsigned int		wsize;		/* write size */
+	unsigned int		wpages;		/* write size (in pages) */
+	unsigned int		wtmult;		/* server disk block size */
+	unsigned int		dtsize;		/* readdir size */
+	unsigned short		port;		/* "port=" setting */
+	unsigned int		bsize;		/* server block size */
+	unsigned int		acregmin;	/* attr cache timeouts */
+	unsigned int		acregmax;
+	unsigned int		acdirmin;
+	unsigned int		acdirmax;
+	unsigned int		namelen;
+	unsigned int		options;	/* extra options enabled by mount */
+#define NFS_OPTION_FSCACHE	0x00000001	/* - local caching enabled */
+
+	struct nfs_fsid		fsid;
+	__u64			maxfilesize;	/* maximum file size */
+	struct timespec		time_delta;	/* smallest time granularity */
+	unsigned long		mount_time;	/* when this fs was mounted */
+	dev_t			s_dev;		/* superblock dev numbers */
+
+#ifdef CONFIG_NFS_FSCACHE
+	struct nfs_fscache_key	*fscache_key;	/* unique key for superblock */
+	struct fscache_cookie	*fscache;	/* superblock cookie */
+#endif
+
+	u32			pnfs_blksize;	/* layout_blksize attr */
+#ifdef CONFIG_NFS_V4
+	u32			attr_bitmask[3];/* V4 bitmask representing the set
+						   of attributes supported on this
+						   filesystem */
+	u32			cache_consistency_bitmask[2];
+						/* V4 bitmask representing the subset
+						   of change attribute, size, ctime
+						   and mtime attributes supported by
+						   the server */
+	u32			acl_bitmask;	/* V4 bitmask representing the ACEs
+						   that are supported on this
+						   filesystem */
+	u32			fh_expire_type;	/* V4 bitmask representing file
+						   handle volatility type for
+						   this filesystem */
+	struct pnfs_layoutdriver_type  *pnfs_curr_ld; /* Active layout driver */
+	struct rpc_wait_queue	roc_rpcwaitq;
+	void			*pnfs_ld_data;	/* per mount point data */
+
+	/* the following fields are protected by nfs_client->cl_lock */
+	struct rb_root		state_owners;
+#endif
+	struct ida		openowner_id;
+	struct ida		lockowner_id;
+	struct list_head	state_owners_lru;
+	struct list_head	layouts;
+	struct list_head	delegations;
+	void (*destroy)(struct nfs_server *);
+
+	atomic_t active; /* Keep trace of any activity to this server */
+
+	/* mountd-related mount options */
+	struct sockaddr_storage	mountd_address;
+	size_t			mountd_addrlen;
+	u32			mountd_version;
+	unsigned short		mountd_port;
+	unsigned short		mountd_protocol;
+};
+
+/* Server capabilities */
+#define NFS_CAP_READDIRPLUS	(1U << 0)
+#define NFS_CAP_HARDLINKS	(1U << 1)
+#define NFS_CAP_SYMLINKS	(1U << 2)
+#define NFS_CAP_ACLS		(1U << 3)
+#define NFS_CAP_ATOMIC_OPEN	(1U << 4)
+#define NFS_CAP_CHANGE_ATTR	(1U << 5)
+#define NFS_CAP_FILEID		(1U << 6)
+#define NFS_CAP_MODE		(1U << 7)
+#define NFS_CAP_NLINK		(1U << 8)
+#define NFS_CAP_OWNER		(1U << 9)
+#define NFS_CAP_OWNER_GROUP	(1U << 10)
+#define NFS_CAP_ATIME		(1U << 11)
+#define NFS_CAP_CTIME		(1U << 12)
+#define NFS_CAP_MTIME		(1U << 13)
+#define NFS_CAP_POSIX_LOCK	(1U << 14)
+#define NFS_CAP_UIDGID_NOMAP	(1U << 15)
+
+
+/* maximum number of slots to use */
+#define NFS4_DEF_SLOT_TABLE_SIZE (16U)
+#define NFS4_MAX_SLOT_TABLE (256U)
+#define NFS4_NO_SLOT ((u32)-1)
+
+#if defined(CONFIG_NFS_V4)
+
+/* Sessions */
+#define SLOT_TABLE_SZ DIV_ROUND_UP(NFS4_MAX_SLOT_TABLE, 8*sizeof(long))
+struct nfs4_slot_table {
+	struct nfs4_slot *slots;		/* seqid per slot */
+	unsigned long   used_slots[SLOT_TABLE_SZ]; /* used/unused bitmap */
+	spinlock_t	slot_tbl_lock;
+	struct rpc_wait_queue	slot_tbl_waitq;	/* allocators may wait here */
+	u32		max_slots;		/* # slots in table */
+	u32		highest_used_slotid;	/* sent to server on each SEQ.
+						 * op for dynamic resizing */
+	u32		target_max_slots;	/* Set by CB_RECALL_SLOT as
+						 * the new max_slots */
+	struct completion complete;
+};
+
+static inline int slot_idx(struct nfs4_slot_table *tbl, struct nfs4_slot *sp)
+{
+	return sp - tbl->slots;
+}
+
+/*
+ * Session related parameters
+ */
+struct nfs4_session {
+	struct nfs4_sessionid		sess_id;
+	u32				flags;
+	unsigned long			session_state;
+	u32				hash_alg;
+	u32				ssv_len;
+
+	/* The fore and back channel */
+	struct nfs4_channel_attrs	fc_attrs;
+	struct nfs4_slot_table		fc_slot_table;
+	struct nfs4_channel_attrs	bc_attrs;
+	struct nfs4_slot_table		bc_slot_table;
+	struct nfs_client		*clp;
+};
+
+#endif /* CONFIG_NFS_V4 */
+#endif
diff --git a/include/linux/nfs_idmap.h b/include/linux/nfs_idmap.h
new file mode 100644
index 00000000..7eed2012
--- /dev/null
+++ b/include/linux/nfs_idmap.h
@@ -0,0 +1,102 @@
+/*
+ * include/linux/nfs_idmap.h
+ *
+ *  UID and GID to name mapping for clients.
+ *
+ *  Copyright (c) 2002 The Regents of the University of Michigan.
+ *  All rights reserved.
+ *
+ *  Marius Aamodt Eriksen <marius@umich.edu>
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *  1. Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *  2. Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in the
+ *     documentation and/or other materials provided with the distribution.
+ *  3. Neither the name of the University nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *  DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ *  FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ *  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ *  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ *  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ *  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ *  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef NFS_IDMAP_H
+#define NFS_IDMAP_H
+
+#include <linux/types.h>
+
+/* XXX from bits/utmp.h  */
+#define IDMAP_NAMESZ  128
+
+#define IDMAP_TYPE_USER  0
+#define IDMAP_TYPE_GROUP 1
+
+#define IDMAP_CONV_IDTONAME 0
+#define IDMAP_CONV_NAMETOID 1
+
+#define IDMAP_STATUS_INVALIDMSG 0x01
+#define IDMAP_STATUS_AGAIN      0x02
+#define IDMAP_STATUS_LOOKUPFAIL 0x04
+#define IDMAP_STATUS_SUCCESS    0x08
+
+struct idmap_msg {
+	__u8  im_type;
+	__u8  im_conv;
+	char  im_name[IDMAP_NAMESZ];
+	__u32 im_id;
+	__u8  im_status;
+};
+
+#ifdef __KERNEL__
+
+/* Forward declaration to make this header independent of others */
+struct nfs_client;
+struct nfs_server;
+struct nfs_fattr;
+struct nfs4_string;
+
+#ifdef CONFIG_NFS_V4
+int nfs_idmap_init(void);
+void nfs_idmap_quit(void);
+#else
+static inline int nfs_idmap_init(void)
+{
+	return 0;
+}
+
+static inline void nfs_idmap_quit(void)
+{}
+#endif
+
+int nfs_idmap_new(struct nfs_client *);
+void nfs_idmap_delete(struct nfs_client *);
+
+void nfs_fattr_init_names(struct nfs_fattr *fattr,
+		struct nfs4_string *owner_name,
+		struct nfs4_string *group_name);
+void nfs_fattr_free_names(struct nfs_fattr *);
+void nfs_fattr_map_and_free_names(struct nfs_server *, struct nfs_fattr *);
+
+int nfs_map_name_to_uid(const struct nfs_server *, const char *, size_t, __u32 *);
+int nfs_map_group_to_gid(const struct nfs_server *, const char *, size_t, __u32 *);
+int nfs_map_uid_to_name(const struct nfs_server *, __u32, char *, size_t);
+int nfs_map_gid_to_group(const struct nfs_server *, __u32, char *, size_t);
+
+extern unsigned int nfs_idmap_cache_timeout;
+#endif /* __KERNEL__ */
+
+#endif /* NFS_IDMAP_H */
diff --git a/include/linux/nfs_iostat.h b/include/linux/nfs_iostat.h
new file mode 100644
index 00000000..9dcbbe9a
--- /dev/null
+++ b/include/linux/nfs_iostat.h
@@ -0,0 +1,133 @@
+/*
+ *  User-space visible declarations for NFS client per-mount
+ *  point statistics
+ *
+ *  Copyright (C) 2005, 2006 Chuck Lever <cel@netapp.com>
+ *
+ *  NFS client per-mount statistics provide information about the
+ *  health of the NFS client and the health of each NFS mount point.
+ *  Generally these are not for detailed problem diagnosis, but
+ *  simply to indicate that there is a problem.
+ *
+ *  These counters are not meant to be human-readable, but are meant
+ *  to be integrated into system monitoring tools such as "sar" and
+ *  "iostat".  As such, the counters are sampled by the tools over
+ *  time, and are never zeroed after a file system is mounted.
+ *  Moving averages can be computed by the tools by taking the
+ *  difference between two instantaneous samples  and dividing that
+ *  by the time between the samples.
+ */
+
+#ifndef _LINUX_NFS_IOSTAT
+#define _LINUX_NFS_IOSTAT
+
+#define NFS_IOSTAT_VERS		"1.1"
+
+/*
+ * NFS byte counters
+ *
+ * 1.  SERVER - the number of payload bytes read from or written
+ *     to the server by the NFS client via an NFS READ or WRITE
+ *     request.
+ *
+ * 2.  NORMAL - the number of bytes read or written by applications
+ *     via the read(2) and write(2) system call interfaces.
+ *
+ * 3.  DIRECT - the number of bytes read or written from files
+ *     opened with the O_DIRECT flag.
+ *
+ * These counters give a view of the data throughput into and out
+ * of the NFS client.  Comparing the number of bytes requested by
+ * an application with the number of bytes the client requests from
+ * the server can provide an indication of client efficiency
+ * (per-op, cache hits, etc).
+ *
+ * These counters can also help characterize which access methods
+ * are in use.  DIRECT by itself shows whether there is any O_DIRECT
+ * traffic.  NORMAL + DIRECT shows how much data is going through
+ * the system call interface.  A large amount of SERVER traffic
+ * without much NORMAL or DIRECT traffic shows that applications
+ * are using mapped files.
+ *
+ * NFS page counters
+ *
+ * These count the number of pages read or written via nfs_readpage(),
+ * nfs_readpages(), or their write equivalents.
+ *
+ * NB: When adding new byte counters, please include the measured
+ * units in the name of each byte counter to help users of this
+ * interface determine what exactly is being counted.
+ */
+enum nfs_stat_bytecounters {
+	NFSIOS_NORMALREADBYTES = 0,
+	NFSIOS_NORMALWRITTENBYTES,
+	NFSIOS_DIRECTREADBYTES,
+	NFSIOS_DIRECTWRITTENBYTES,
+	NFSIOS_SERVERREADBYTES,
+	NFSIOS_SERVERWRITTENBYTES,
+	NFSIOS_READPAGES,
+	NFSIOS_WRITEPAGES,
+	__NFSIOS_BYTESMAX,
+};
+
+/*
+ * NFS event counters
+ *
+ * These counters provide a low-overhead way of monitoring client
+ * activity without enabling NFS trace debugging.  The counters
+ * show the rate at which VFS requests are made, and how often the
+ * client invalidates its data and attribute caches.  This allows
+ * system administrators to monitor such things as how close-to-open
+ * is working, and answer questions such as "why are there so many
+ * GETATTR requests on the wire?"
+ *
+ * They also count anamolous events such as short reads and writes,
+ * silly renames due to close-after-delete, and operations that
+ * change the size of a file (such operations can often be the
+ * source of data corruption if applications aren't using file
+ * locking properly).
+ */
+enum nfs_stat_eventcounters {
+	NFSIOS_INODEREVALIDATE = 0,
+	NFSIOS_DENTRYREVALIDATE,
+	NFSIOS_DATAINVALIDATE,
+	NFSIOS_ATTRINVALIDATE,
+	NFSIOS_VFSOPEN,
+	NFSIOS_VFSLOOKUP,
+	NFSIOS_VFSACCESS,
+	NFSIOS_VFSUPDATEPAGE,
+	NFSIOS_VFSREADPAGE,
+	NFSIOS_VFSREADPAGES,
+	NFSIOS_VFSWRITEPAGE,
+	NFSIOS_VFSWRITEPAGES,
+	NFSIOS_VFSGETDENTS,
+	NFSIOS_VFSSETATTR,
+	NFSIOS_VFSFLUSH,
+	NFSIOS_VFSFSYNC,
+	NFSIOS_VFSLOCK,
+	NFSIOS_VFSRELEASE,
+	NFSIOS_CONGESTIONWAIT,
+	NFSIOS_SETATTRTRUNC,
+	NFSIOS_EXTENDWRITE,
+	NFSIOS_SILLYRENAME,
+	NFSIOS_SHORTREAD,
+	NFSIOS_SHORTWRITE,
+	NFSIOS_DELAY,
+	NFSIOS_PNFS_READ,
+	NFSIOS_PNFS_WRITE,
+	__NFSIOS_COUNTSMAX,
+};
+
+/*
+ * NFS local caching servicing counters
+ */
+enum nfs_stat_fscachecounters {
+	NFSIOS_FSCACHE_PAGES_READ_OK,
+	NFSIOS_FSCACHE_PAGES_READ_FAIL,
+	NFSIOS_FSCACHE_PAGES_WRITTEN_OK,
+	NFSIOS_FSCACHE_PAGES_WRITTEN_FAIL,
+	NFSIOS_FSCACHE_PAGES_UNCACHED,
+	__NFSIOS_FSCACHEMAX,
+};
+
+#endif	/* _LINUX_NFS_IOSTAT */
diff --git a/include/linux/nfs_mount.h b/include/linux/nfs_mount.h
new file mode 100644
index 00000000..576bddd7
--- /dev/null
+++ b/include/linux/nfs_mount.h
@@ -0,0 +1,77 @@
+#ifndef _LINUX_NFS_MOUNT_H
+#define _LINUX_NFS_MOUNT_H
+
+/*
+ *  linux/include/linux/nfs_mount.h
+ *
+ *  Copyright (C) 1992  Rick Sladkey
+ *
+ *  structure passed from user-space to kernel-space during an nfs mount
+ */
+#include <linux/in.h>
+#include <linux/nfs.h>
+#include <linux/nfs2.h>
+#include <linux/nfs3.h>
+
+/*
+ * WARNING!  Do not delete or change the order of these fields.  If
+ * a new field is required then add it to the end.  The version field
+ * tracks which fields are present.  This will ensure some measure of
+ * mount-to-kernel version compatibility.  Some of these aren't used yet
+ * but here they are anyway.
+ */
+#define NFS_MOUNT_VERSION	6
+#define NFS_MAX_CONTEXT_LEN	256
+
+struct nfs_mount_data {
+	int		version;		/* 1 */
+	int		fd;			/* 1 */
+	struct nfs2_fh	old_root;		/* 1 */
+	int		flags;			/* 1 */
+	int		rsize;			/* 1 */
+	int		wsize;			/* 1 */
+	int		timeo;			/* 1 */
+	int		retrans;		/* 1 */
+	int		acregmin;		/* 1 */
+	int		acregmax;		/* 1 */
+	int		acdirmin;		/* 1 */
+	int		acdirmax;		/* 1 */
+	struct sockaddr_in addr;		/* 1 */
+	char		hostname[NFS_MAXNAMLEN + 1];		/* 1 */
+	int		namlen;			/* 2 */
+	unsigned int	bsize;			/* 3 */
+	struct nfs3_fh	root;			/* 4 */
+	int		pseudoflavor;		/* 5 */
+	char		context[NFS_MAX_CONTEXT_LEN + 1];	/* 6 */
+};
+
+/* bits in the flags field visible to user space */
+
+#define NFS_MOUNT_SOFT		0x0001	/* 1 */
+#define NFS_MOUNT_INTR		0x0002	/* 1 */ /* now unused, but ABI */
+#define NFS_MOUNT_SECURE	0x0004	/* 1 */
+#define NFS_MOUNT_POSIX		0x0008	/* 1 */
+#define NFS_MOUNT_NOCTO		0x0010	/* 1 */
+#define NFS_MOUNT_NOAC		0x0020	/* 1 */
+#define NFS_MOUNT_TCP		0x0040	/* 2 */
+#define NFS_MOUNT_VER3		0x0080	/* 3 */
+#define NFS_MOUNT_KERBEROS	0x0100	/* 3 */
+#define NFS_MOUNT_NONLM		0x0200	/* 3 */
+#define NFS_MOUNT_BROKEN_SUID	0x0400	/* 4 */
+#define NFS_MOUNT_NOACL		0x0800	/* 4 */
+#define NFS_MOUNT_STRICTLOCK	0x1000	/* reserved for NFSv4 */
+#define NFS_MOUNT_SECFLAVOUR	0x2000	/* 5 */
+#define NFS_MOUNT_NORDIRPLUS	0x4000	/* 5 */
+#define NFS_MOUNT_UNSHARED	0x8000	/* 5 */
+#define NFS_MOUNT_FLAGMASK	0xFFFF
+
+/* The following are for internal use only */
+#define NFS_MOUNT_LOOKUP_CACHE_NONEG	0x10000
+#define NFS_MOUNT_LOOKUP_CACHE_NONE	0x20000
+#define NFS_MOUNT_NORESVPORT		0x40000
+#define NFS_MOUNT_LEGACY_INTERFACE	0x80000
+
+#define NFS_MOUNT_LOCAL_FLOCK	0x100000
+#define NFS_MOUNT_LOCAL_FCNTL	0x200000
+
+#endif
diff --git a/include/linux/nfs_page.h b/include/linux/nfs_page.h
new file mode 100644
index 00000000..eac30d6b
--- /dev/null
+++ b/include/linux/nfs_page.h
@@ -0,0 +1,154 @@
+/*
+ * linux/include/linux/nfs_page.h
+ *
+ * Copyright (C) 2000 Trond Myklebust
+ *
+ * NFS page cache wrapper.
+ */
+
+#ifndef _LINUX_NFS_PAGE_H
+#define _LINUX_NFS_PAGE_H
+
+
+#include <linux/list.h>
+#include <linux/pagemap.h>
+#include <linux/wait.h>
+#include <linux/sunrpc/auth.h>
+#include <linux/nfs_xdr.h>
+
+#include <linux/kref.h>
+
+/*
+ * Valid flags for a dirty buffer
+ */
+enum {
+	PG_BUSY = 0,
+	PG_MAPPED,
+	PG_CLEAN,
+	PG_NEED_COMMIT,
+	PG_NEED_RESCHED,
+	PG_PARTIAL_READ_FAILED,
+	PG_COMMIT_TO_DS,
+};
+
+struct nfs_inode;
+struct nfs_page {
+	struct list_head	wb_list;	/* Defines state of page: */
+	struct page		*wb_page;	/* page to read in/write out */
+	struct nfs_open_context	*wb_context;	/* File state context info */
+	struct nfs_lock_context	*wb_lock_context;	/* lock context info */
+	atomic_t		wb_complete;	/* i/os we're waiting for */
+	pgoff_t			wb_index;	/* Offset >> PAGE_CACHE_SHIFT */
+	unsigned int		wb_offset,	/* Offset & ~PAGE_CACHE_MASK */
+				wb_pgbase,	/* Start of page data */
+				wb_bytes;	/* Length of request */
+	struct kref		wb_kref;	/* reference count */
+	unsigned long		wb_flags;
+	struct nfs_writeverf	wb_verf;	/* Commit cookie */
+};
+
+struct nfs_pageio_descriptor;
+struct nfs_pageio_ops {
+	void	(*pg_init)(struct nfs_pageio_descriptor *, struct nfs_page *);
+	bool	(*pg_test)(struct nfs_pageio_descriptor *, struct nfs_page *, struct nfs_page *);
+	int	(*pg_doio)(struct nfs_pageio_descriptor *);
+};
+
+struct nfs_pageio_descriptor {
+	struct list_head	pg_list;
+	unsigned long		pg_bytes_written;
+	size_t			pg_count;
+	size_t			pg_bsize;
+	unsigned int		pg_base;
+	unsigned char		pg_moreio : 1,
+				pg_recoalesce : 1;
+
+	struct inode		*pg_inode;
+	const struct nfs_pageio_ops *pg_ops;
+	int 			pg_ioflags;
+	int			pg_error;
+	const struct rpc_call_ops *pg_rpc_callops;
+	struct pnfs_layout_segment *pg_lseg;
+};
+
+#define NFS_WBACK_BUSY(req)	(test_bit(PG_BUSY,&(req)->wb_flags))
+
+extern	struct nfs_page *nfs_create_request(struct nfs_open_context *ctx,
+					    struct inode *inode,
+					    struct page *page,
+					    unsigned int offset,
+					    unsigned int count);
+extern	void nfs_release_request(struct nfs_page *req);
+
+
+extern	void nfs_pageio_init(struct nfs_pageio_descriptor *desc,
+			     struct inode *inode,
+			     const struct nfs_pageio_ops *pg_ops,
+			     size_t bsize,
+			     int how);
+extern	int nfs_pageio_add_request(struct nfs_pageio_descriptor *,
+				   struct nfs_page *);
+extern	void nfs_pageio_complete(struct nfs_pageio_descriptor *desc);
+extern	void nfs_pageio_cond_complete(struct nfs_pageio_descriptor *, pgoff_t);
+extern bool nfs_generic_pg_test(struct nfs_pageio_descriptor *desc,
+				struct nfs_page *prev,
+				struct nfs_page *req);
+extern  int nfs_wait_on_request(struct nfs_page *);
+extern	void nfs_unlock_request(struct nfs_page *req);
+
+/*
+ * Lock the page of an asynchronous request without getting a new reference
+ */
+static inline int
+nfs_lock_request_dontget(struct nfs_page *req)
+{
+	return !test_and_set_bit(PG_BUSY, &req->wb_flags);
+}
+
+static inline int
+nfs_lock_request(struct nfs_page *req)
+{
+	if (test_and_set_bit(PG_BUSY, &req->wb_flags))
+		return 0;
+	kref_get(&req->wb_kref);
+	return 1;
+}
+
+
+/**
+ * nfs_list_add_request - Insert a request into a list
+ * @req: request
+ * @head: head of list into which to insert the request.
+ */
+static inline void
+nfs_list_add_request(struct nfs_page *req, struct list_head *head)
+{
+	list_add_tail(&req->wb_list, head);
+}
+
+
+/**
+ * nfs_list_remove_request - Remove a request from its wb_list
+ * @req: request
+ */
+static inline void
+nfs_list_remove_request(struct nfs_page *req)
+{
+	if (list_empty(&req->wb_list))
+		return;
+	list_del_init(&req->wb_list);
+}
+
+static inline struct nfs_page *
+nfs_list_entry(struct list_head *head)
+{
+	return list_entry(head, struct nfs_page, wb_list);
+}
+
+static inline
+loff_t req_offset(struct nfs_page *req)
+{
+	return (((loff_t)req->wb_index) << PAGE_CACHE_SHIFT) + req->wb_offset;
+}
+
+#endif /* _LINUX_NFS_PAGE_H */
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
new file mode 100644
index 00000000..7ba3551a
--- /dev/null
+++ b/include/linux/nfs_xdr.h
@@ -0,0 +1,1315 @@
+#ifndef _LINUX_NFS_XDR_H
+#define _LINUX_NFS_XDR_H
+
+#include <linux/nfsacl.h>
+#include <linux/sunrpc/gss_api.h>
+
+/*
+ * To change the maximum rsize and wsize supported by the NFS client, adjust
+ * NFS_MAX_FILE_IO_SIZE.  64KB is a typical maximum, but some servers can
+ * support a megabyte or more.  The default is left at 4096 bytes, which is
+ * reasonable for NFS over UDP.
+ */
+#define NFS_MAX_FILE_IO_SIZE	(1048576U)
+#define NFS_DEF_FILE_IO_SIZE	(4096U)
+#define NFS_MIN_FILE_IO_SIZE	(1024U)
+
+/* Forward declaration for NFS v3 */
+struct nfs4_secinfo_flavors;
+
+struct nfs4_string {
+	unsigned int len;
+	char *data;
+};
+
+struct nfs_fsid {
+	uint64_t		major;
+	uint64_t		minor;
+};
+
+/*
+ * Helper for checking equality between 2 fsids.
+ */
+static inline int nfs_fsid_equal(const struct nfs_fsid *a, const struct nfs_fsid *b)
+{
+	return a->major == b->major && a->minor == b->minor;
+}
+
+struct nfs_fattr {
+	unsigned int		valid;		/* which fields are valid */
+	umode_t			mode;
+	__u32			nlink;
+	__u32			uid;
+	__u32			gid;
+	dev_t			rdev;
+	__u64			size;
+	union {
+		struct {
+			__u32	blocksize;
+			__u32	blocks;
+		} nfs2;
+		struct {
+			__u64	used;
+		} nfs3;
+	} du;
+	struct nfs_fsid		fsid;
+	__u64			fileid;
+	__u64			mounted_on_fileid;
+	struct timespec		atime;
+	struct timespec		mtime;
+	struct timespec		ctime;
+	__u64			change_attr;	/* NFSv4 change attribute */
+	__u64			pre_change_attr;/* pre-op NFSv4 change attribute */
+	__u64			pre_size;	/* pre_op_attr.size	  */
+	struct timespec		pre_mtime;	/* pre_op_attr.mtime	  */
+	struct timespec		pre_ctime;	/* pre_op_attr.ctime	  */
+	unsigned long		time_start;
+	unsigned long		gencount;
+	struct nfs4_string	*owner_name;
+	struct nfs4_string	*group_name;
+};
+
+#define NFS_ATTR_FATTR_TYPE		(1U << 0)
+#define NFS_ATTR_FATTR_MODE		(1U << 1)
+#define NFS_ATTR_FATTR_NLINK		(1U << 2)
+#define NFS_ATTR_FATTR_OWNER		(1U << 3)
+#define NFS_ATTR_FATTR_GROUP		(1U << 4)
+#define NFS_ATTR_FATTR_RDEV		(1U << 5)
+#define NFS_ATTR_FATTR_SIZE		(1U << 6)
+#define NFS_ATTR_FATTR_PRESIZE		(1U << 7)
+#define NFS_ATTR_FATTR_BLOCKS_USED	(1U << 8)
+#define NFS_ATTR_FATTR_SPACE_USED	(1U << 9)
+#define NFS_ATTR_FATTR_FSID		(1U << 10)
+#define NFS_ATTR_FATTR_FILEID		(1U << 11)
+#define NFS_ATTR_FATTR_ATIME		(1U << 12)
+#define NFS_ATTR_FATTR_MTIME		(1U << 13)
+#define NFS_ATTR_FATTR_CTIME		(1U << 14)
+#define NFS_ATTR_FATTR_PREMTIME		(1U << 15)
+#define NFS_ATTR_FATTR_PRECTIME		(1U << 16)
+#define NFS_ATTR_FATTR_CHANGE		(1U << 17)
+#define NFS_ATTR_FATTR_PRECHANGE	(1U << 18)
+#define NFS_ATTR_FATTR_V4_LOCATIONS	(1U << 19)
+#define NFS_ATTR_FATTR_V4_REFERRAL	(1U << 20)
+#define NFS_ATTR_FATTR_MOUNTPOINT	(1U << 21)
+#define NFS_ATTR_FATTR_MOUNTED_ON_FILEID (1U << 22)
+#define NFS_ATTR_FATTR_OWNER_NAME	(1U << 23)
+#define NFS_ATTR_FATTR_GROUP_NAME	(1U << 24)
+
+#define NFS_ATTR_FATTR (NFS_ATTR_FATTR_TYPE \
+		| NFS_ATTR_FATTR_MODE \
+		| NFS_ATTR_FATTR_NLINK \
+		| NFS_ATTR_FATTR_OWNER \
+		| NFS_ATTR_FATTR_GROUP \
+		| NFS_ATTR_FATTR_RDEV \
+		| NFS_ATTR_FATTR_SIZE \
+		| NFS_ATTR_FATTR_FSID \
+		| NFS_ATTR_FATTR_FILEID \
+		| NFS_ATTR_FATTR_ATIME \
+		| NFS_ATTR_FATTR_MTIME \
+		| NFS_ATTR_FATTR_CTIME)
+#define NFS_ATTR_FATTR_V2 (NFS_ATTR_FATTR \
+		| NFS_ATTR_FATTR_BLOCKS_USED)
+#define NFS_ATTR_FATTR_V3 (NFS_ATTR_FATTR \
+		| NFS_ATTR_FATTR_SPACE_USED)
+#define NFS_ATTR_FATTR_V4 (NFS_ATTR_FATTR \
+		| NFS_ATTR_FATTR_SPACE_USED \
+		| NFS_ATTR_FATTR_CHANGE)
+
+/*
+ * Info on the file system
+ */
+struct nfs_fsinfo {
+	struct nfs_fattr	*fattr; /* Post-op attributes */
+	__u32			rtmax;	/* max.  read transfer size */
+	__u32			rtpref;	/* pref. read transfer size */
+	__u32			rtmult;	/* reads should be multiple of this */
+	__u32			wtmax;	/* max.  write transfer size */
+	__u32			wtpref;	/* pref. write transfer size */
+	__u32			wtmult;	/* writes should be multiple of this */
+	__u32			dtpref;	/* pref. readdir transfer size */
+	__u64			maxfilesize;
+	struct timespec		time_delta; /* server time granularity */
+	__u32			lease_time; /* in seconds */
+	__u32			layouttype; /* supported pnfs layout driver */
+	__u32			blksize; /* preferred pnfs io block size */
+};
+
+struct nfs_fsstat {
+	struct nfs_fattr	*fattr; /* Post-op attributes */
+	__u64			tbytes;	/* total size in bytes */
+	__u64			fbytes;	/* # of free bytes */
+	__u64			abytes;	/* # of bytes available to user */
+	__u64			tfiles;	/* # of files */
+	__u64			ffiles;	/* # of free files */
+	__u64			afiles;	/* # of files available to user */
+};
+
+struct nfs2_fsstat {
+	__u32			tsize;  /* Server transfer size */
+	__u32			bsize;  /* Filesystem block size */
+	__u32			blocks; /* No. of "bsize" blocks on filesystem */
+	__u32			bfree;  /* No. of free "bsize" blocks */
+	__u32			bavail; /* No. of available "bsize" blocks */
+};
+
+struct nfs_pathconf {
+	struct nfs_fattr	*fattr; /* Post-op attributes */
+	__u32			max_link; /* max # of hard links */
+	__u32			max_namelen; /* max name length */
+};
+
+struct nfs4_change_info {
+	u32			atomic;
+	u64			before;
+	u64			after;
+};
+
+struct nfs_seqid;
+
+/* nfs41 sessions channel attributes */
+struct nfs4_channel_attrs {
+	u32			max_rqst_sz;
+	u32			max_resp_sz;
+	u32			max_resp_sz_cached;
+	u32			max_ops;
+	u32			max_reqs;
+};
+
+/* nfs41 sessions slot seqid */
+struct nfs4_slot {
+	u32		 	seq_nr;
+};
+
+struct nfs4_sequence_args {
+	struct nfs4_session	*sa_session;
+	u32			sa_slotid;
+	u8			sa_cache_this;
+};
+
+struct nfs4_sequence_res {
+	struct nfs4_session	*sr_session;
+	struct nfs4_slot	*sr_slot;	/* slot used to send request */
+	int			sr_status;	/* sequence operation status */
+	unsigned long		sr_renewal_time;
+	u32			sr_status_flags;
+};
+
+struct nfs4_get_lease_time_args {
+	struct nfs4_sequence_args	la_seq_args;
+};
+
+struct nfs4_get_lease_time_res {
+	struct nfs_fsinfo	       *lr_fsinfo;
+	struct nfs4_sequence_res	lr_seq_res;
+};
+
+#define PNFS_LAYOUT_MAXSIZE 4096
+
+struct nfs4_layoutdriver_data {
+	struct page **pages;
+	__u32 pglen;
+	__u32 len;
+};
+
+struct pnfs_layout_range {
+	u32 iomode;
+	u64 offset;
+	u64 length;
+};
+
+struct nfs4_layoutget_args {
+	__u32 type;
+	struct pnfs_layout_range range;
+	__u64 minlength;
+	__u32 maxcount;
+	struct inode *inode;
+	struct nfs_open_context *ctx;
+	struct nfs4_sequence_args seq_args;
+	nfs4_stateid stateid;
+	struct nfs4_layoutdriver_data layout;
+};
+
+struct nfs4_layoutget_res {
+	__u32 return_on_close;
+	struct pnfs_layout_range range;
+	__u32 type;
+	nfs4_stateid stateid;
+	struct nfs4_sequence_res seq_res;
+	struct nfs4_layoutdriver_data *layoutp;
+};
+
+struct nfs4_layoutget {
+	struct nfs4_layoutget_args args;
+	struct nfs4_layoutget_res res;
+	struct pnfs_layout_segment **lsegpp;
+	gfp_t gfp_flags;
+};
+
+struct nfs4_getdevicelist_args {
+	const struct nfs_fh *fh;
+	u32 layoutclass;
+	struct nfs4_sequence_args seq_args;
+};
+
+struct nfs4_getdevicelist_res {
+	struct pnfs_devicelist *devlist;
+	struct nfs4_sequence_res seq_res;
+};
+
+struct nfs4_getdeviceinfo_args {
+	struct pnfs_device *pdev;
+	struct nfs4_sequence_args seq_args;
+};
+
+struct nfs4_getdeviceinfo_res {
+	struct pnfs_device *pdev;
+	struct nfs4_sequence_res seq_res;
+};
+
+struct nfs4_layoutcommit_args {
+	nfs4_stateid stateid;
+	__u64 lastbytewritten;
+	struct inode *inode;
+	const u32 *bitmask;
+	struct nfs4_sequence_args seq_args;
+};
+
+struct nfs4_layoutcommit_res {
+	struct nfs_fattr *fattr;
+	const struct nfs_server *server;
+	struct nfs4_sequence_res seq_res;
+	int status;
+};
+
+struct nfs4_layoutcommit_data {
+	struct rpc_task task;
+	struct nfs_fattr fattr;
+	struct list_head lseg_list;
+	struct rpc_cred *cred;
+	struct nfs4_layoutcommit_args args;
+	struct nfs4_layoutcommit_res res;
+};
+
+struct nfs4_layoutreturn_args {
+	struct pnfs_layout_hdr *layout;
+	struct inode *inode;
+	nfs4_stateid stateid;
+	__u32   layout_type;
+	struct nfs4_sequence_args seq_args;
+};
+
+struct nfs4_layoutreturn_res {
+	struct nfs4_sequence_res seq_res;
+	u32 lrs_present;
+	nfs4_stateid stateid;
+};
+
+struct nfs4_layoutreturn {
+	struct nfs4_layoutreturn_args args;
+	struct nfs4_layoutreturn_res res;
+	struct rpc_cred *cred;
+	struct nfs_client *clp;
+	int rpc_status;
+};
+
+struct stateowner_id {
+	__u64	create_time;
+	__u32	uniquifier;
+};
+
+/*
+ * Arguments to the open call.
+ */
+struct nfs_openargs {
+	const struct nfs_fh *	fh;
+	struct nfs_seqid *	seqid;
+	int			open_flags;
+	fmode_t			fmode;
+	__u64                   clientid;
+	struct stateowner_id	id;
+	union {
+		struct {
+			struct iattr *  attrs;    /* UNCHECKED, GUARDED */
+			nfs4_verifier   verifier; /* EXCLUSIVE */
+		};
+		nfs4_stateid	delegation;		/* CLAIM_DELEGATE_CUR */
+		fmode_t		delegation_type;	/* CLAIM_PREVIOUS */
+	} u;
+	const struct qstr *	name;
+	const struct nfs_server *server;	 /* Needed for ID mapping */
+	const u32 *		bitmask;
+	const u32 *		dir_bitmask;
+	__u32			claim;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs_openres {
+	nfs4_stateid            stateid;
+	struct nfs_fh           fh;
+	struct nfs4_change_info	cinfo;
+	__u32                   rflags;
+	struct nfs_fattr *      f_attr;
+	struct nfs_fattr *      dir_attr;
+	struct nfs_seqid *	seqid;
+	const struct nfs_server *server;
+	fmode_t			delegation_type;
+	nfs4_stateid		delegation;
+	__u32			do_recall;
+	__u64			maxsize;
+	__u32			attrset[NFS4_BITMAP_SIZE];
+	struct nfs4_string	*owner;
+	struct nfs4_string	*group_owner;
+	struct nfs4_sequence_res	seq_res;
+};
+
+/*
+ * Arguments to the open_confirm call.
+ */
+struct nfs_open_confirmargs {
+	const struct nfs_fh *	fh;
+	nfs4_stateid *		stateid;
+	struct nfs_seqid *	seqid;
+};
+
+struct nfs_open_confirmres {
+	nfs4_stateid            stateid;
+	struct nfs_seqid *	seqid;
+};
+
+/*
+ * Arguments to the close call.
+ */
+struct nfs_closeargs {
+	struct nfs_fh *         fh;
+	nfs4_stateid *		stateid;
+	struct nfs_seqid *	seqid;
+	fmode_t			fmode;
+	const u32 *		bitmask;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs_closeres {
+	nfs4_stateid            stateid;
+	struct nfs_fattr *	fattr;
+	struct nfs_seqid *	seqid;
+	const struct nfs_server *server;
+	struct nfs4_sequence_res	seq_res;
+};
+/*
+ *  * Arguments to the lock,lockt, and locku call.
+ *   */
+struct nfs_lowner {
+	__u64			clientid;
+	__u64			id;
+	dev_t			s_dev;
+};
+
+struct nfs_lock_args {
+	struct nfs_fh *		fh;
+	struct file_lock *	fl;
+	struct nfs_seqid *	lock_seqid;
+	nfs4_stateid *		lock_stateid;
+	struct nfs_seqid *	open_seqid;
+	nfs4_stateid *		open_stateid;
+	struct nfs_lowner	lock_owner;
+	unsigned char		block : 1;
+	unsigned char		reclaim : 1;
+	unsigned char		new_lock_owner : 1;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs_lock_res {
+	nfs4_stateid		stateid;
+	struct nfs_seqid *	lock_seqid;
+	struct nfs_seqid *	open_seqid;
+	struct nfs4_sequence_res	seq_res;
+};
+
+struct nfs_locku_args {
+	struct nfs_fh *		fh;
+	struct file_lock *	fl;
+	struct nfs_seqid *	seqid;
+	nfs4_stateid *		stateid;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs_locku_res {
+	nfs4_stateid		stateid;
+	struct nfs_seqid *	seqid;
+	struct nfs4_sequence_res	seq_res;
+};
+
+struct nfs_lockt_args {
+	struct nfs_fh *		fh;
+	struct file_lock *	fl;
+	struct nfs_lowner	lock_owner;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs_lockt_res {
+	struct file_lock *	denied; /* LOCK, LOCKT failed */
+	struct nfs4_sequence_res	seq_res;
+};
+
+struct nfs_release_lockowner_args {
+	struct nfs_lowner	lock_owner;
+};
+
+struct nfs4_delegreturnargs {
+	const struct nfs_fh *fhandle;
+	const nfs4_stateid *stateid;
+	const u32 * bitmask;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs4_delegreturnres {
+	struct nfs_fattr * fattr;
+	const struct nfs_server *server;
+	struct nfs4_sequence_res	seq_res;
+};
+
+/*
+ * Arguments to the read call.
+ */
+struct nfs_readargs {
+	struct nfs_fh *		fh;
+	struct nfs_open_context *context;
+	struct nfs_lock_context *lock_context;
+	__u64			offset;
+	__u32			count;
+	unsigned int		pgbase;
+	struct page **		pages;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs_readres {
+	struct nfs_fattr *	fattr;
+	__u32			count;
+	int                     eof;
+	struct nfs4_sequence_res	seq_res;
+};
+
+/*
+ * Arguments to the write call.
+ */
+struct nfs_writeargs {
+	struct nfs_fh *		fh;
+	struct nfs_open_context *context;
+	struct nfs_lock_context *lock_context;
+	__u64			offset;
+	__u32			count;
+	enum nfs3_stable_how	stable;
+	unsigned int		pgbase;
+	struct page **		pages;
+	const u32 *		bitmask;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs_writeverf {
+	enum nfs3_stable_how	committed;
+	__be32			verifier[2];
+};
+
+struct nfs_writeres {
+	struct nfs_fattr *	fattr;
+	struct nfs_writeverf *	verf;
+	__u32			count;
+	const struct nfs_server *server;
+	struct nfs4_sequence_res	seq_res;
+};
+
+/*
+ * Common arguments to the unlink call
+ */
+struct nfs_removeargs {
+	const struct nfs_fh	*fh;
+	struct qstr		name;
+	const u32 *		bitmask;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs_removeres {
+	const struct nfs_server *server;
+	struct nfs_fattr	*dir_attr;
+	struct nfs4_change_info	cinfo;
+	struct nfs4_sequence_res 	seq_res;
+};
+
+/*
+ * Common arguments to the rename call
+ */
+struct nfs_renameargs {
+	const struct nfs_fh		*old_dir;
+	const struct nfs_fh		*new_dir;
+	const struct qstr		*old_name;
+	const struct qstr		*new_name;
+	const u32			*bitmask;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs_renameres {
+	const struct nfs_server		*server;
+	struct nfs4_change_info		old_cinfo;
+	struct nfs_fattr		*old_fattr;
+	struct nfs4_change_info		new_cinfo;
+	struct nfs_fattr		*new_fattr;
+	struct nfs4_sequence_res	seq_res;
+};
+
+/*
+ * Argument struct for decode_entry function
+ */
+struct nfs_entry {
+	__u64			ino;
+	__u64			cookie,
+				prev_cookie;
+	const char *		name;
+	unsigned int		len;
+	int			eof;
+	struct nfs_fh *		fh;
+	struct nfs_fattr *	fattr;
+	unsigned char		d_type;
+	struct nfs_server *	server;
+};
+
+/*
+ * The following types are for NFSv2 only.
+ */
+struct nfs_sattrargs {
+	struct nfs_fh *		fh;
+	struct iattr *		sattr;
+};
+
+struct nfs_diropargs {
+	struct nfs_fh *		fh;
+	const char *		name;
+	unsigned int		len;
+};
+
+struct nfs_createargs {
+	struct nfs_fh *		fh;
+	const char *		name;
+	unsigned int		len;
+	struct iattr *		sattr;
+};
+
+struct nfs_setattrargs {
+	struct nfs_fh *                 fh;
+	nfs4_stateid                    stateid;
+	struct iattr *                  iap;
+	const struct nfs_server *	server; /* Needed for name mapping */
+	const u32 *			bitmask;
+	struct nfs4_sequence_args 	seq_args;
+};
+
+struct nfs_setaclargs {
+	struct nfs_fh *			fh;
+	size_t				acl_len;
+	unsigned int			acl_pgbase;
+	struct page **			acl_pages;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs_setaclres {
+	struct nfs4_sequence_res	seq_res;
+};
+
+struct nfs_getaclargs {
+	struct nfs_fh *			fh;
+	size_t				acl_len;
+	unsigned int			acl_pgbase;
+	struct page **			acl_pages;
+	struct nfs4_sequence_args 	seq_args;
+};
+
+/* getxattr ACL interface flags */
+#define NFS4_ACL_LEN_REQUEST	0x0001	/* zero length getxattr buffer */
+struct nfs_getaclres {
+	size_t				acl_len;
+	size_t				acl_data_offset;
+	int				acl_flags;
+	struct page *			acl_scratch;
+	struct nfs4_sequence_res	seq_res;
+};
+
+struct nfs_setattrres {
+	struct nfs_fattr *              fattr;
+	const struct nfs_server *	server;
+	struct nfs4_sequence_res	seq_res;
+};
+
+struct nfs_linkargs {
+	struct nfs_fh *		fromfh;
+	struct nfs_fh *		tofh;
+	const char *		toname;
+	unsigned int		tolen;
+};
+
+struct nfs_symlinkargs {
+	struct nfs_fh *		fromfh;
+	const char *		fromname;
+	unsigned int		fromlen;
+	struct page **		pages;
+	unsigned int		pathlen;
+	struct iattr *		sattr;
+};
+
+struct nfs_readdirargs {
+	struct nfs_fh *		fh;
+	__u32			cookie;
+	unsigned int		count;
+	struct page **		pages;
+};
+
+struct nfs3_getaclargs {
+	struct nfs_fh *		fh;
+	int			mask;
+	struct page **		pages;
+};
+
+struct nfs3_setaclargs {
+	struct inode *		inode;
+	int			mask;
+	struct posix_acl *	acl_access;
+	struct posix_acl *	acl_default;
+	size_t			len;
+	unsigned int		npages;
+	struct page **		pages;
+};
+
+struct nfs_diropok {
+	struct nfs_fh *		fh;
+	struct nfs_fattr *	fattr;
+};
+
+struct nfs_readlinkargs {
+	struct nfs_fh *		fh;
+	unsigned int		pgbase;
+	unsigned int		pglen;
+	struct page **		pages;
+};
+
+struct nfs3_sattrargs {
+	struct nfs_fh *		fh;
+	struct iattr *		sattr;
+	unsigned int		guard;
+	struct timespec		guardtime;
+};
+
+struct nfs3_diropargs {
+	struct nfs_fh *		fh;
+	const char *		name;
+	unsigned int		len;
+};
+
+struct nfs3_accessargs {
+	struct nfs_fh *		fh;
+	__u32			access;
+};
+
+struct nfs3_createargs {
+	struct nfs_fh *		fh;
+	const char *		name;
+	unsigned int		len;
+	struct iattr *		sattr;
+	enum nfs3_createmode	createmode;
+	__be32			verifier[2];
+};
+
+struct nfs3_mkdirargs {
+	struct nfs_fh *		fh;
+	const char *		name;
+	unsigned int		len;
+	struct iattr *		sattr;
+};
+
+struct nfs3_symlinkargs {
+	struct nfs_fh *		fromfh;
+	const char *		fromname;
+	unsigned int		fromlen;
+	struct page **		pages;
+	unsigned int		pathlen;
+	struct iattr *		sattr;
+};
+
+struct nfs3_mknodargs {
+	struct nfs_fh *		fh;
+	const char *		name;
+	unsigned int		len;
+	enum nfs3_ftype		type;
+	struct iattr *		sattr;
+	dev_t			rdev;
+};
+
+struct nfs3_linkargs {
+	struct nfs_fh *		fromfh;
+	struct nfs_fh *		tofh;
+	const char *		toname;
+	unsigned int		tolen;
+};
+
+struct nfs3_readdirargs {
+	struct nfs_fh *		fh;
+	__u64			cookie;
+	__be32			verf[2];
+	int			plus;
+	unsigned int            count;
+	struct page **		pages;
+};
+
+struct nfs3_diropres {
+	struct nfs_fattr *	dir_attr;
+	struct nfs_fh *		fh;
+	struct nfs_fattr *	fattr;
+};
+
+struct nfs3_accessres {
+	struct nfs_fattr *	fattr;
+	__u32			access;
+};
+
+struct nfs3_readlinkargs {
+	struct nfs_fh *		fh;
+	unsigned int		pgbase;
+	unsigned int		pglen;
+	struct page **		pages;
+};
+
+struct nfs3_linkres {
+	struct nfs_fattr *	dir_attr;
+	struct nfs_fattr *	fattr;
+};
+
+struct nfs3_readdirres {
+	struct nfs_fattr *	dir_attr;
+	__be32 *		verf;
+	int			plus;
+};
+
+struct nfs3_getaclres {
+	struct nfs_fattr *	fattr;
+	int			mask;
+	unsigned int		acl_access_count;
+	unsigned int		acl_default_count;
+	struct posix_acl *	acl_access;
+	struct posix_acl *	acl_default;
+};
+
+#ifdef CONFIG_NFS_V4
+
+typedef u64 clientid4;
+
+struct nfs4_accessargs {
+	const struct nfs_fh *		fh;
+	const u32 *			bitmask;
+	u32				access;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs4_accessres {
+	const struct nfs_server *	server;
+	struct nfs_fattr *		fattr;
+	u32				supported;
+	u32				access;
+	struct nfs4_sequence_res	seq_res;
+};
+
+struct nfs4_create_arg {
+	u32				ftype;
+	union {
+		struct {
+			struct page **	pages;
+			unsigned int	len;
+		} symlink;   /* NF4LNK */
+		struct {
+			u32		specdata1;
+			u32		specdata2;
+		} device;    /* NF4BLK, NF4CHR */
+	} u;
+	const struct qstr *		name;
+	const struct nfs_server *	server;
+	const struct iattr *		attrs;
+	const struct nfs_fh *		dir_fh;
+	const u32 *			bitmask;
+	struct nfs4_sequence_args 	seq_args;
+};
+
+struct nfs4_create_res {
+	const struct nfs_server *	server;
+	struct nfs_fh *			fh;
+	struct nfs_fattr *		fattr;
+	struct nfs4_change_info		dir_cinfo;
+	struct nfs_fattr *		dir_fattr;
+	struct nfs4_sequence_res	seq_res;
+};
+
+struct nfs4_fsinfo_arg {
+	const struct nfs_fh *		fh;
+	const u32 *			bitmask;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs4_fsinfo_res {
+	struct nfs_fsinfo	       *fsinfo;
+	struct nfs4_sequence_res	seq_res;
+};
+
+struct nfs4_getattr_arg {
+	const struct nfs_fh *		fh;
+	const u32 *			bitmask;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs4_getattr_res {
+	const struct nfs_server *	server;
+	struct nfs_fattr *		fattr;
+	struct nfs4_sequence_res	seq_res;
+};
+
+struct nfs4_link_arg {
+	const struct nfs_fh *		fh;
+	const struct nfs_fh *		dir_fh;
+	const struct qstr *		name;
+	const u32 *			bitmask;
+	struct nfs4_sequence_args 	seq_args;
+};
+
+struct nfs4_link_res {
+	const struct nfs_server *	server;
+	struct nfs_fattr *		fattr;
+	struct nfs4_change_info		cinfo;
+	struct nfs_fattr *		dir_attr;
+	struct nfs4_sequence_res	seq_res;
+};
+
+
+struct nfs4_lookup_arg {
+	const struct nfs_fh *		dir_fh;
+	const struct qstr *		name;
+	const u32 *			bitmask;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs4_lookup_res {
+	const struct nfs_server *	server;
+	struct nfs_fattr *		fattr;
+	struct nfs_fh *			fh;
+	struct nfs4_sequence_res	seq_res;
+};
+
+struct nfs4_lookup_root_arg {
+	const u32 *			bitmask;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs4_pathconf_arg {
+	const struct nfs_fh *		fh;
+	const u32 *			bitmask;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs4_pathconf_res {
+	struct nfs_pathconf	       *pathconf;
+	struct nfs4_sequence_res	seq_res;
+};
+
+struct nfs4_readdir_arg {
+	const struct nfs_fh *		fh;
+	u64				cookie;
+	nfs4_verifier			verifier;
+	u32				count;
+	struct page **			pages;	/* zero-copy data */
+	unsigned int			pgbase;	/* zero-copy data */
+	const u32 *			bitmask;
+	int				plus;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs4_readdir_res {
+	nfs4_verifier			verifier;
+	unsigned int			pgbase;
+	struct nfs4_sequence_res	seq_res;
+};
+
+struct nfs4_readlink {
+	const struct nfs_fh *		fh;
+	unsigned int			pgbase;
+	unsigned int			pglen;   /* zero-copy data */
+	struct page **			pages;   /* zero-copy data */
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs4_readlink_res {
+	struct nfs4_sequence_res	seq_res;
+};
+
+#define NFS4_SETCLIENTID_NAMELEN	(127)
+struct nfs4_setclientid {
+	const nfs4_verifier *		sc_verifier;
+	unsigned int			sc_name_len;
+	char				sc_name[NFS4_SETCLIENTID_NAMELEN + 1];
+	u32				sc_prog;
+	unsigned int			sc_netid_len;
+	char				sc_netid[RPCBIND_MAXNETIDLEN + 1];
+	unsigned int			sc_uaddr_len;
+	char				sc_uaddr[RPCBIND_MAXUADDRLEN + 1];
+	u32				sc_cb_ident;
+};
+
+struct nfs4_setclientid_res {
+	u64				clientid;
+	nfs4_verifier			confirm;
+};
+
+struct nfs4_statfs_arg {
+	const struct nfs_fh *		fh;
+	const u32 *			bitmask;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs4_statfs_res {
+	struct nfs_fsstat	       *fsstat;
+	struct nfs4_sequence_res	seq_res;
+};
+
+struct nfs4_server_caps_arg {
+	struct nfs_fh		       *fhandle;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs4_server_caps_res {
+	u32				attr_bitmask[3];
+	u32				acl_bitmask;
+	u32				has_links;
+	u32				has_symlinks;
+	u32				fh_expire_type;
+	struct nfs4_sequence_res	seq_res;
+};
+
+#define NFS4_PATHNAME_MAXCOMPONENTS 512
+struct nfs4_pathname {
+	unsigned int ncomponents;
+	struct nfs4_string components[NFS4_PATHNAME_MAXCOMPONENTS];
+};
+
+#define NFS4_FS_LOCATION_MAXSERVERS 10
+struct nfs4_fs_location {
+	unsigned int nservers;
+	struct nfs4_string servers[NFS4_FS_LOCATION_MAXSERVERS];
+	struct nfs4_pathname rootpath;
+};
+
+#define NFS4_FS_LOCATIONS_MAXENTRIES 10
+struct nfs4_fs_locations {
+	struct nfs_fattr fattr;
+	const struct nfs_server *server;
+	struct nfs4_pathname fs_path;
+	int nlocations;
+	struct nfs4_fs_location locations[NFS4_FS_LOCATIONS_MAXENTRIES];
+};
+
+struct nfs4_fs_locations_arg {
+	const struct nfs_fh *dir_fh;
+	const struct qstr *name;
+	struct page *page;
+	const u32 *bitmask;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs4_fs_locations_res {
+	struct nfs4_fs_locations       *fs_locations;
+	struct nfs4_sequence_res	seq_res;
+};
+
+struct nfs4_secinfo_oid {
+	unsigned int len;
+	char data[GSS_OID_MAX_LEN];
+};
+
+struct nfs4_secinfo_gss {
+	struct nfs4_secinfo_oid sec_oid4;
+	unsigned int qop4;
+	unsigned int service;
+};
+
+struct nfs4_secinfo_flavor {
+	unsigned int 		flavor;
+	struct nfs4_secinfo_gss	gss;
+};
+
+struct nfs4_secinfo_flavors {
+	unsigned int num_flavors;
+	struct nfs4_secinfo_flavor flavors[0];
+};
+
+struct nfs4_secinfo_arg {
+	const struct nfs_fh		*dir_fh;
+	const struct qstr		*name;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs4_secinfo_res {
+	struct nfs4_secinfo_flavors	*flavors;
+	struct nfs4_sequence_res	seq_res;
+};
+
+#endif /* CONFIG_NFS_V4 */
+
+struct nfstime4 {
+	u64	seconds;
+	u32	nseconds;
+};
+
+#ifdef CONFIG_NFS_V4_1
+#define NFS4_EXCHANGE_ID_LEN	(48)
+struct nfs41_exchange_id_args {
+	struct nfs_client		*client;
+	nfs4_verifier			*verifier;
+	unsigned int 			id_len;
+	char 				id[NFS4_EXCHANGE_ID_LEN];
+	u32				flags;
+};
+
+struct server_owner {
+	uint64_t			minor_id;
+	uint32_t			major_id_sz;
+	char				major_id[NFS4_OPAQUE_LIMIT];
+};
+
+struct server_scope {
+	uint32_t			server_scope_sz;
+	char 				server_scope[NFS4_OPAQUE_LIMIT];
+};
+
+struct nfs41_impl_id {
+	char				domain[NFS4_OPAQUE_LIMIT + 1];
+	char				name[NFS4_OPAQUE_LIMIT + 1];
+	struct nfstime4			date;
+};
+
+struct nfs41_exchange_id_res {
+	struct nfs_client		*client;
+	u32				flags;
+	struct server_scope		*server_scope;
+	struct nfs41_impl_id		*impl_id;
+};
+
+struct nfs41_create_session_args {
+	struct nfs_client	       *client;
+	uint32_t			flags;
+	uint32_t			cb_program;
+	struct nfs4_channel_attrs	fc_attrs;	/* Fore Channel */
+	struct nfs4_channel_attrs	bc_attrs;	/* Back Channel */
+};
+
+struct nfs41_create_session_res {
+	struct nfs_client	       *client;
+};
+
+struct nfs41_reclaim_complete_args {
+	/* In the future extend to include curr_fh for use with migration */
+	unsigned char			one_fs:1;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs41_reclaim_complete_res {
+	struct nfs4_sequence_res	seq_res;
+};
+
+#define SECINFO_STYLE_CURRENT_FH 0
+#define SECINFO_STYLE_PARENT 1
+struct nfs41_secinfo_no_name_args {
+	int				style;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs41_test_stateid_args {
+	nfs4_stateid			*stateid;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs41_test_stateid_res {
+	unsigned int			status;
+	struct nfs4_sequence_res	seq_res;
+};
+
+struct nfs41_free_stateid_args {
+	nfs4_stateid			*stateid;
+	struct nfs4_sequence_args	seq_args;
+};
+
+struct nfs41_free_stateid_res {
+	unsigned int			status;
+	struct nfs4_sequence_res	seq_res;
+};
+
+#endif /* CONFIG_NFS_V4_1 */
+
+struct nfs_page;
+
+#define NFS_PAGEVEC_SIZE	(8U)
+
+struct nfs_read_data {
+	struct rpc_task		task;
+	struct inode		*inode;
+	struct rpc_cred		*cred;
+	struct nfs_fattr	fattr;	/* fattr storage */
+	struct list_head	pages;	/* Coalesced read requests */
+	struct list_head	list;	/* lists of struct nfs_read_data */
+	struct nfs_page		*req;	/* multi ops per nfs_page */
+	struct page		**pagevec;
+	unsigned int		npages;	/* Max length of pagevec */
+	struct nfs_readargs args;
+	struct nfs_readres  res;
+	unsigned long		timestamp;	/* For lease renewal */
+	struct pnfs_layout_segment *lseg;
+	struct nfs_client	*ds_clp;	/* pNFS data server */
+	const struct rpc_call_ops *mds_ops;
+	int (*read_done_cb) (struct rpc_task *task, struct nfs_read_data *data);
+	__u64			mds_offset;
+	int			pnfs_error;
+	struct page		*page_array[NFS_PAGEVEC_SIZE];
+};
+
+struct nfs_write_data {
+	struct rpc_task		task;
+	struct inode		*inode;
+	struct rpc_cred		*cred;
+	struct nfs_fattr	fattr;
+	struct nfs_writeverf	verf;
+	struct list_head	pages;		/* Coalesced requests we wish to flush */
+	struct list_head	list;		/* lists of struct nfs_write_data */
+	struct nfs_page		*req;		/* multi ops per nfs_page */
+	struct page		**pagevec;
+	unsigned int		npages;		/* Max length of pagevec */
+	struct nfs_writeargs	args;		/* argument struct */
+	struct nfs_writeres	res;		/* result struct */
+	struct pnfs_layout_segment *lseg;
+	struct nfs_client	*ds_clp;	/* pNFS data server */
+	int			ds_commit_index;
+	const struct rpc_call_ops *mds_ops;
+	int (*write_done_cb) (struct rpc_task *task, struct nfs_write_data *data);
+#ifdef CONFIG_NFS_V4
+	unsigned long		timestamp;	/* For lease renewal */
+#endif
+	__u64			mds_offset;	/* Filelayout dense stripe */
+	int			pnfs_error;
+	struct page		*page_array[NFS_PAGEVEC_SIZE];
+};
+
+struct nfs_unlinkdata {
+	struct hlist_node list;
+	struct nfs_removeargs args;
+	struct nfs_removeres res;
+	struct inode *dir;
+	struct rpc_cred	*cred;
+	struct nfs_fattr dir_attr;
+};
+
+struct nfs_renamedata {
+	struct nfs_renameargs	args;
+	struct nfs_renameres	res;
+	struct rpc_cred		*cred;
+	struct inode		*old_dir;
+	struct dentry		*old_dentry;
+	struct nfs_fattr	old_fattr;
+	struct inode		*new_dir;
+	struct dentry		*new_dentry;
+	struct nfs_fattr	new_fattr;
+};
+
+struct nfs_access_entry;
+struct nfs_client;
+struct rpc_timeout;
+
+/*
+ * RPC procedure vector for NFSv2/NFSv3 demuxing
+ */
+struct nfs_rpc_ops {
+	u32	version;		/* Protocol version */
+	const struct dentry_operations *dentry_ops;
+	const struct inode_operations *dir_inode_ops;
+	const struct inode_operations *file_inode_ops;
+	const struct file_operations *file_ops;
+
+	int	(*getroot) (struct nfs_server *, struct nfs_fh *,
+			    struct nfs_fsinfo *);
+	int	(*getattr) (struct nfs_server *, struct nfs_fh *,
+			    struct nfs_fattr *);
+	int	(*setattr) (struct dentry *, struct nfs_fattr *,
+			    struct iattr *);
+	int	(*lookup)  (struct rpc_clnt *clnt, struct inode *, struct qstr *,
+			    struct nfs_fh *, struct nfs_fattr *);
+	int	(*access)  (struct inode *, struct nfs_access_entry *);
+	int	(*readlink)(struct inode *, struct page *, unsigned int,
+			    unsigned int);
+	int	(*create)  (struct inode *, struct dentry *,
+			    struct iattr *, int, struct nfs_open_context *);
+	int	(*remove)  (struct inode *, struct qstr *);
+	void	(*unlink_setup)  (struct rpc_message *, struct inode *dir);
+	void	(*unlink_rpc_prepare) (struct rpc_task *, struct nfs_unlinkdata *);
+	int	(*unlink_done) (struct rpc_task *, struct inode *);
+	int	(*rename)  (struct inode *, struct qstr *,
+			    struct inode *, struct qstr *);
+	void	(*rename_setup)  (struct rpc_message *msg, struct inode *dir);
+	void	(*rename_rpc_prepare)(struct rpc_task *task, struct nfs_renamedata *);
+	int	(*rename_done) (struct rpc_task *task, struct inode *old_dir, struct inode *new_dir);
+	int	(*link)    (struct inode *, struct inode *, struct qstr *);
+	int	(*symlink) (struct inode *, struct dentry *, struct page *,
+			    unsigned int, struct iattr *);
+	int	(*mkdir)   (struct inode *, struct dentry *, struct iattr *);
+	int	(*rmdir)   (struct inode *, struct qstr *);
+	int	(*readdir) (struct dentry *, struct rpc_cred *,
+			    u64, struct page **, unsigned int, int);
+	int	(*mknod)   (struct inode *, struct dentry *, struct iattr *,
+			    dev_t);
+	int	(*statfs)  (struct nfs_server *, struct nfs_fh *,
+			    struct nfs_fsstat *);
+	int	(*fsinfo)  (struct nfs_server *, struct nfs_fh *,
+			    struct nfs_fsinfo *);
+	int	(*pathconf) (struct nfs_server *, struct nfs_fh *,
+			     struct nfs_pathconf *);
+	int	(*set_capabilities)(struct nfs_server *, struct nfs_fh *);
+	int	(*decode_dirent)(struct xdr_stream *, struct nfs_entry *, int);
+	void	(*read_setup)   (struct nfs_read_data *, struct rpc_message *);
+	void	(*read_rpc_prepare)(struct rpc_task *, struct nfs_read_data *);
+	int	(*read_done)  (struct rpc_task *, struct nfs_read_data *);
+	void	(*write_setup)  (struct nfs_write_data *, struct rpc_message *);
+	void	(*write_rpc_prepare)(struct rpc_task *, struct nfs_write_data *);
+	int	(*write_done)  (struct rpc_task *, struct nfs_write_data *);
+	void	(*commit_setup) (struct nfs_write_data *, struct rpc_message *);
+	int	(*commit_done) (struct rpc_task *, struct nfs_write_data *);
+	int	(*lock)(struct file *, int, struct file_lock *);
+	int	(*lock_check_bounds)(const struct file_lock *);
+	void	(*clear_acl_cache)(struct inode *);
+	void	(*close_context)(struct nfs_open_context *ctx, int);
+	struct inode * (*open_context) (struct inode *dir,
+				struct nfs_open_context *ctx,
+				int open_flags,
+				struct iattr *iattr);
+	int	(*init_client) (struct nfs_client *, const struct rpc_timeout *,
+				const char *, rpc_authflavor_t, int);
+	int	(*secinfo)(struct inode *, const struct qstr *, struct nfs4_secinfo_flavors *);
+};
+
+/*
+ * 	NFS_CALL(getattr, inode, (fattr));
+ * into
+ *	NFS_PROTO(inode)->getattr(fattr);
+ */
+#define NFS_CALL(op, inode, args)	NFS_PROTO(inode)->op args
+
+/*
+ * Function vectors etc. for the NFS client
+ */
+extern const struct nfs_rpc_ops	nfs_v2_clientops;
+extern const struct nfs_rpc_ops	nfs_v3_clientops;
+extern const struct nfs_rpc_ops	nfs_v4_clientops;
+extern const struct rpc_version nfs_version2;
+extern const struct rpc_version nfs_version3;
+extern const struct rpc_version nfs_version4;
+
+extern const struct rpc_version nfsacl_version3;
+extern const struct rpc_program nfsacl_program;
+
+#endif
diff --git a/include/linux/nfsacl.h b/include/linux/nfsacl.h
new file mode 100644
index 00000000..fabcb1e5
--- /dev/null
+++ b/include/linux/nfsacl.h
@@ -0,0 +1,62 @@
+/*
+ * File: linux/nfsacl.h
+ *
+ * (C) 2003 Andreas Gruenbacher <agruen@suse.de>
+ */
+#ifndef __LINUX_NFSACL_H
+#define __LINUX_NFSACL_H
+
+#define NFS_ACL_PROGRAM	100227
+
+#define ACLPROC2_GETACL		1
+#define ACLPROC2_SETACL		2
+#define ACLPROC2_GETATTR	3
+#define ACLPROC2_ACCESS		4
+
+#define ACLPROC3_GETACL		1
+#define ACLPROC3_SETACL		2
+
+
+/* Flags for the getacl/setacl mode */
+#define NFS_ACL			0x0001
+#define NFS_ACLCNT		0x0002
+#define NFS_DFACL		0x0004
+#define NFS_DFACLCNT		0x0008
+
+/* Flag for Default ACL entries */
+#define NFS_ACL_DEFAULT		0x1000
+
+#ifdef __KERNEL__
+
+#include <linux/posix_acl.h>
+#include <linux/sunrpc/xdr.h>
+
+/* Maximum number of ACL entries over NFS */
+#define NFS_ACL_MAX_ENTRIES	1024
+
+#define NFSACL_MAXWORDS		(2*(2+3*NFS_ACL_MAX_ENTRIES))
+#define NFSACL_MAXPAGES		((2*(8+12*NFS_ACL_MAX_ENTRIES) + PAGE_SIZE-1) \
+				 >> PAGE_SHIFT)
+
+#define NFS_ACL_MAX_ENTRIES_INLINE	(5)
+#define NFS_ACL_INLINE_BUFSIZE	((2*(2+3*NFS_ACL_MAX_ENTRIES_INLINE)) << 2)
+
+static inline unsigned int
+nfsacl_size(struct posix_acl *acl_access, struct posix_acl *acl_default)
+{
+	unsigned int w = 16;
+	w += max(acl_access ? (int)acl_access->a_count : 3, 4) * 12;
+	if (acl_default)
+		w += max((int)acl_default->a_count, 4) * 12;
+	return w;
+}
+
+extern int
+nfsacl_encode(struct xdr_buf *buf, unsigned int base, struct inode *inode,
+	      struct posix_acl *acl, int encode_entries, int typeflag);
+extern int
+nfsacl_decode(struct xdr_buf *buf, unsigned int base, unsigned int *aclcnt,
+	      struct posix_acl **pacl);
+
+#endif /* __KERNEL__ */
+#endif  /* __LINUX_NFSACL_H */
diff --git a/include/linux/nfsd/Kbuild b/include/linux/nfsd/Kbuild
new file mode 100644
index 00000000..5b7d84ac
--- /dev/null
+++ b/include/linux/nfsd/Kbuild
@@ -0,0 +1,5 @@
+header-y += cld.h
+header-y += debug.h
+header-y += export.h
+header-y += nfsfh.h
+header-y += stats.h
diff --git a/include/linux/nfsd/cld.h b/include/linux/nfsd/cld.h
new file mode 100644
index 00000000..f14a9ab0
--- /dev/null
+++ b/include/linux/nfsd/cld.h
@@ -0,0 +1,56 @@
+/*
+ * Upcall description for nfsdcld communication
+ *
+ * Copyright (c) 2012 Red Hat, Inc.
+ * Author(s): Jeff Layton <jlayton@redhat.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _NFSD_CLD_H
+#define _NFSD_CLD_H
+
+/* latest upcall version available */
+#define CLD_UPCALL_VERSION 1
+
+/* defined by RFC3530 */
+#define NFS4_OPAQUE_LIMIT 1024
+
+enum cld_command {
+	Cld_Create,		/* create a record for this cm_id */
+	Cld_Remove,		/* remove record of this cm_id */
+	Cld_Check,		/* is this cm_id allowed? */
+	Cld_GraceDone,		/* grace period is complete */
+};
+
+/* representation of long-form NFSv4 client ID */
+struct cld_name {
+	uint16_t	cn_len;				/* length of cm_id */
+	unsigned char	cn_id[NFS4_OPAQUE_LIMIT];	/* client-provided */
+} __attribute__((packed));
+
+/* message struct for communication with userspace */
+struct cld_msg {
+	uint8_t		cm_vers;		/* upcall version */
+	uint8_t		cm_cmd;			/* upcall command */
+	int16_t		cm_status;		/* return code */
+	uint32_t	cm_xid;			/* transaction id */
+	union {
+		int64_t		cm_gracetime;	/* grace period start time */
+		struct cld_name	cm_name;
+	} __attribute__((packed)) cm_u;
+} __attribute__((packed));
+
+#endif /* !_NFSD_CLD_H */
diff --git a/include/linux/nfsd/debug.h b/include/linux/nfsd/debug.h
new file mode 100644
index 00000000..ee4aa917
--- /dev/null
+++ b/include/linux/nfsd/debug.h
@@ -0,0 +1,48 @@
+/*
+ * linux/include/linux/nfsd/debug.h
+ *
+ * Debugging-related stuff for nfsd
+ *
+ * Copyright (C) 1995 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef LINUX_NFSD_DEBUG_H
+#define LINUX_NFSD_DEBUG_H
+
+#include <linux/sunrpc/debug.h>
+
+/*
+ * Enable debugging for nfsd.
+ * Requires RPC_DEBUG.
+ */
+#ifdef RPC_DEBUG
+# define NFSD_DEBUG		1
+#endif
+
+/*
+ * knfsd debug flags
+ */
+#define NFSDDBG_SOCK		0x0001
+#define NFSDDBG_FH		0x0002
+#define NFSDDBG_EXPORT		0x0004
+#define NFSDDBG_SVC		0x0008
+#define NFSDDBG_PROC		0x0010
+#define NFSDDBG_FILEOP		0x0020
+#define NFSDDBG_AUTH		0x0040
+#define NFSDDBG_REPCACHE	0x0080
+#define NFSDDBG_XDR		0x0100
+#define NFSDDBG_LOCKD		0x0200
+#define NFSDDBG_ALL		0x7FFF
+#define NFSDDBG_NOCHANGE	0xFFFF
+
+
+#ifdef __KERNEL__
+# undef ifdebug
+# ifdef NFSD_DEBUG
+#  define ifdebug(flag)		if (nfsd_debug & NFSDDBG_##flag)
+# else
+#  define ifdebug(flag)		if (0)
+# endif
+#endif /* __KERNEL__ */
+
+#endif /* LINUX_NFSD_DEBUG_H */
diff --git a/include/linux/nfsd/export.h b/include/linux/nfsd/export.h
new file mode 100644
index 00000000..f85308e6
--- /dev/null
+++ b/include/linux/nfsd/export.h
@@ -0,0 +1,161 @@
+/*
+ * include/linux/nfsd/export.h
+ * 
+ * Public declarations for NFS exports. The definitions for the
+ * syscall interface are in nfsctl.h
+ *
+ * Copyright (C) 1995-1997 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef NFSD_EXPORT_H
+#define NFSD_EXPORT_H
+
+# include <linux/types.h>
+#ifdef __KERNEL__
+# include <linux/nfsd/nfsfh.h>
+#endif
+
+/*
+ * Important limits for the exports stuff.
+ */
+#define NFSCLNT_IDMAX		1024
+#define NFSCLNT_ADDRMAX		16
+#define NFSCLNT_KEYMAX		32
+
+/*
+ * Export flags.
+ */
+#define NFSEXP_READONLY		0x0001
+#define NFSEXP_INSECURE_PORT	0x0002
+#define NFSEXP_ROOTSQUASH	0x0004
+#define NFSEXP_ALLSQUASH	0x0008
+#define NFSEXP_ASYNC		0x0010
+#define NFSEXP_GATHERED_WRITES	0x0020
+/* 40 80 100 currently unused */
+#define NFSEXP_NOHIDE		0x0200
+#define NFSEXP_NOSUBTREECHECK	0x0400
+#define	NFSEXP_NOAUTHNLM	0x0800		/* Don't authenticate NLM requests - just trust */
+#define NFSEXP_MSNFS		0x1000	/* do silly things that MS clients expect; no longer supported */
+#define NFSEXP_FSID		0x2000
+#define	NFSEXP_CROSSMOUNT	0x4000
+#define	NFSEXP_NOACL		0x8000	/* reserved for possible ACL related use */
+/*
+ * The NFSEXP_V4ROOT flag causes the kernel to give access only to NFSv4
+ * clients, and only to the single directory that is the root of the
+ * export; further lookup and readdir operations are treated as if every
+ * subdirectory was a mountpoint, and ignored if they are not themselves
+ * exported.  This is used by nfsd and mountd to construct the NFSv4
+ * pseudofilesystem, which provides access only to paths leading to each
+ * exported filesystem.
+ */
+#define	NFSEXP_V4ROOT		0x10000
+/* All flags that we claim to support.  (Note we don't support NOACL.) */
+#define NFSEXP_ALLFLAGS		0x17E3F
+
+/* The flags that may vary depending on security flavor: */
+#define NFSEXP_SECINFO_FLAGS	(NFSEXP_READONLY | NFSEXP_ROOTSQUASH \
+					| NFSEXP_ALLSQUASH \
+					| NFSEXP_INSECURE_PORT)
+
+#ifdef __KERNEL__
+
+/*
+ * FS Locations
+ */
+
+#define MAX_FS_LOCATIONS	128
+
+struct nfsd4_fs_location {
+	char *hosts; /* colon separated list of hosts */
+	char *path;  /* slash separated list of path components */
+};
+
+struct nfsd4_fs_locations {
+	uint32_t locations_count;
+	struct nfsd4_fs_location *locations;
+/* If we're not actually serving this data ourselves (only providing a
+ * list of replicas that do serve it) then we set "migrated": */
+	int migrated;
+};
+
+/*
+ * We keep an array of pseudoflavors with the export, in order from most
+ * to least preferred.  For the foreseeable future, we don't expect more
+ * than the eight pseudoflavors null, unix, krb5, krb5i, krb5p, skpm3,
+ * spkm3i, and spkm3p (and using all 8 at once should be rare).
+ */
+#define MAX_SECINFO_LIST	8
+
+struct exp_flavor_info {
+	u32	pseudoflavor;
+	u32	flags;
+};
+
+struct svc_export {
+	struct cache_head	h;
+	struct auth_domain *	ex_client;
+	int			ex_flags;
+	struct path		ex_path;
+	uid_t			ex_anon_uid;
+	gid_t			ex_anon_gid;
+	int			ex_fsid;
+	unsigned char *		ex_uuid; /* 16 byte fsid */
+	struct nfsd4_fs_locations ex_fslocs;
+	int			ex_nflavors;
+	struct exp_flavor_info	ex_flavors[MAX_SECINFO_LIST];
+};
+
+/* an "export key" (expkey) maps a filehandlefragement to an
+ * svc_export for a given client.  There can be several per export,
+ * for the different fsid types.
+ */
+struct svc_expkey {
+	struct cache_head	h;
+
+	struct auth_domain *	ek_client;
+	int			ek_fsidtype;
+	u32			ek_fsid[6];
+
+	struct path		ek_path;
+};
+
+#define EX_ISSYNC(exp)		(!((exp)->ex_flags & NFSEXP_ASYNC))
+#define EX_NOHIDE(exp)		((exp)->ex_flags & NFSEXP_NOHIDE)
+#define EX_WGATHER(exp)		((exp)->ex_flags & NFSEXP_GATHERED_WRITES)
+
+int nfsexp_flags(struct svc_rqst *rqstp, struct svc_export *exp);
+__be32 check_nfsd_access(struct svc_export *exp, struct svc_rqst *rqstp);
+
+/*
+ * Function declarations
+ */
+int			nfsd_export_init(void);
+void			nfsd_export_shutdown(void);
+void			nfsd_export_flush(void);
+struct svc_export *	rqst_exp_get_by_name(struct svc_rqst *,
+					     struct path *);
+struct svc_export *	rqst_exp_parent(struct svc_rqst *,
+					struct path *);
+struct svc_export *	rqst_find_fsidzero_export(struct svc_rqst *);
+int			exp_rootfh(struct auth_domain *, 
+					char *path, struct knfsd_fh *, int maxsize);
+__be32			exp_pseudoroot(struct svc_rqst *, struct svc_fh *);
+__be32			nfserrno(int errno);
+
+extern struct cache_detail svc_export_cache;
+
+static inline void exp_put(struct svc_export *exp)
+{
+	cache_put(&exp->h, &svc_export_cache);
+}
+
+static inline void exp_get(struct svc_export *exp)
+{
+	cache_get(&exp->h);
+}
+struct svc_export * rqst_exp_find(struct svc_rqst *, int, u32 *);
+
+#endif /* __KERNEL__ */
+
+#endif /* NFSD_EXPORT_H */
+
diff --git a/include/linux/nfsd/nfsfh.h b/include/linux/nfsd/nfsfh.h
new file mode 100644
index 00000000..ce4743a2
--- /dev/null
+++ b/include/linux/nfsd/nfsfh.h
@@ -0,0 +1,171 @@
+/*
+ * include/linux/nfsd/nfsfh.h
+ *
+ * This file describes the layout of the file handles as passed
+ * over the wire.
+ *
+ * Earlier versions of knfsd used to sign file handles using keyed MD5
+ * or SHA. I've removed this code, because it doesn't give you more
+ * security than blocking external access to port 2049 on your firewall.
+ *
+ * Copyright (C) 1995, 1996, 1997 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef _LINUX_NFSD_FH_H
+#define _LINUX_NFSD_FH_H
+
+#include <linux/types.h>
+#include <linux/nfs.h>
+#include <linux/nfs2.h>
+#include <linux/nfs3.h>
+#include <linux/nfs4.h>
+#ifdef __KERNEL__
+# include <linux/sunrpc/svc.h>
+#endif
+
+/*
+ * This is the old "dentry style" Linux NFSv2 file handle.
+ *
+ * The xino and xdev fields are currently used to transport the
+ * ino/dev of the exported inode.
+ */
+struct nfs_fhbase_old {
+	__u32		fb_dcookie;	/* dentry cookie - always 0xfeebbaca */
+	__u32		fb_ino;		/* our inode number */
+	__u32		fb_dirino;	/* dir inode number, 0 for directories */
+	__u32		fb_dev;		/* our device */
+	__u32		fb_xdev;
+	__u32		fb_xino;
+	__u32		fb_generation;
+};
+
+/*
+ * This is the new flexible, extensible style NFSv2/v3 file handle.
+ * by Neil Brown <neilb@cse.unsw.edu.au> - March 2000
+ *
+ * The file handle starts with a sequence of four-byte words.
+ * The first word contains a version number (1) and three descriptor bytes
+ * that tell how the remaining 3 variable length fields should be handled.
+ * These three bytes are auth_type, fsid_type and fileid_type.
+ *
+ * All four-byte values are in host-byte-order.
+ *
+ * The auth_type field specifies how the filehandle can be authenticated
+ * This might allow a file to be confirmed to be in a writable part of a
+ * filetree without checking the path from it up to the root.
+ * Current values:
+ *     0  - No authentication.  fb_auth is 0 bytes long
+ * Possible future values:
+ *     1  - 4 bytes taken from MD5 hash of the remainer of the file handle
+ *          prefixed by a secret and with the important export flags.
+ *
+ * The fsid_type identifies how the filesystem (or export point) is
+ *    encoded.
+ *  Current values:
+ *     0  - 4 byte device id (ms-2-bytes major, ls-2-bytes minor), 4byte inode number
+ *        NOTE: we cannot use the kdev_t device id value, because kdev_t.h
+ *              says we mustn't.  We must break it up and reassemble.
+ *     1  - 4 byte user specified identifier
+ *     2  - 4 byte major, 4 byte minor, 4 byte inode number - DEPRECATED
+ *     3  - 4 byte device id, encoded for user-space, 4 byte inode number
+ *     4  - 4 byte inode number and 4 byte uuid
+ *     5  - 8 byte uuid
+ *     6  - 16 byte uuid
+ *     7  - 8 byte inode number and 16 byte uuid
+ *
+ * The fileid_type identified how the file within the filesystem is encoded.
+ * This is (will be) passed to, and set by, the underlying filesystem if it supports
+ * filehandle operations.  The filesystem must not use the value '0' or '0xff' and may
+ * only use the values 1 and 2 as defined below:
+ *  Current values:
+ *    0   - The root, or export point, of the filesystem.  fb_fileid is 0 bytes.
+ *    1   - 32bit inode number, 32 bit generation number.
+ *    2   - 32bit inode number, 32 bit generation number, 32 bit parent directory inode number.
+ *
+ */
+struct nfs_fhbase_new {
+	__u8		fb_version;	/* == 1, even => nfs_fhbase_old */
+	__u8		fb_auth_type;
+	__u8		fb_fsid_type;
+	__u8		fb_fileid_type;
+	__u32		fb_auth[1];
+/*	__u32		fb_fsid[0]; floating */
+/*	__u32		fb_fileid[0]; floating */
+};
+
+struct knfsd_fh {
+	unsigned int	fh_size;	/* significant for NFSv3.
+					 * Points to the current size while building
+					 * a new file handle
+					 */
+	union {
+		struct nfs_fhbase_old	fh_old;
+		__u32			fh_pad[NFS4_FHSIZE/4];
+		struct nfs_fhbase_new	fh_new;
+	} fh_base;
+};
+
+#define ofh_dcookie		fh_base.fh_old.fb_dcookie
+#define ofh_ino			fh_base.fh_old.fb_ino
+#define ofh_dirino		fh_base.fh_old.fb_dirino
+#define ofh_dev			fh_base.fh_old.fb_dev
+#define ofh_xdev		fh_base.fh_old.fb_xdev
+#define ofh_xino		fh_base.fh_old.fb_xino
+#define ofh_generation		fh_base.fh_old.fb_generation
+
+#define	fh_version		fh_base.fh_new.fb_version
+#define	fh_fsid_type		fh_base.fh_new.fb_fsid_type
+#define	fh_auth_type		fh_base.fh_new.fb_auth_type
+#define	fh_fileid_type		fh_base.fh_new.fb_fileid_type
+#define	fh_auth			fh_base.fh_new.fb_auth
+#define	fh_fsid			fh_base.fh_new.fb_auth
+
+#ifdef __KERNEL__
+
+static inline __u32 ino_t_to_u32(ino_t ino)
+{
+	return (__u32) ino;
+}
+
+static inline ino_t u32_to_ino_t(__u32 uino)
+{
+	return (ino_t) uino;
+}
+
+/*
+ * This is the internal representation of an NFS handle used in knfsd.
+ * pre_mtime/post_version will be used to support wcc_attr's in NFSv3.
+ */
+typedef struct svc_fh {
+	struct knfsd_fh		fh_handle;	/* FH data */
+	struct dentry *		fh_dentry;	/* validated dentry */
+	struct svc_export *	fh_export;	/* export pointer */
+	int			fh_maxsize;	/* max size for fh_handle */
+
+	unsigned char		fh_locked;	/* inode locked by us */
+
+#ifdef CONFIG_NFSD_V3
+	unsigned char		fh_post_saved;	/* post-op attrs saved */
+	unsigned char		fh_pre_saved;	/* pre-op attrs saved */
+
+	/* Pre-op attributes saved during fh_lock */
+	__u64			fh_pre_size;	/* size before operation */
+	struct timespec		fh_pre_mtime;	/* mtime before oper */
+	struct timespec		fh_pre_ctime;	/* ctime before oper */
+	/*
+	 * pre-op nfsv4 change attr: note must check IS_I_VERSION(inode)
+	 *  to find out if it is valid.
+	 */
+	u64			fh_pre_change;
+
+	/* Post-op attributes saved in fh_unlock */
+	struct kstat		fh_post_attr;	/* full attrs after operation */
+	u64			fh_post_change; /* nfsv4 change; see above */
+#endif /* CONFIG_NFSD_V3 */
+
+} svc_fh;
+
+#endif /* __KERNEL__ */
+
+
+#endif /* _LINUX_NFSD_FH_H */
diff --git a/include/linux/nfsd/stats.h b/include/linux/nfsd/stats.h
new file mode 100644
index 00000000..2693ef64
--- /dev/null
+++ b/include/linux/nfsd/stats.h
@@ -0,0 +1,51 @@
+/*
+ * linux/include/linux/nfsd/stats.h
+ *
+ * Statistics for NFS server.
+ *
+ * Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef LINUX_NFSD_STATS_H
+#define LINUX_NFSD_STATS_H
+
+#include <linux/nfs4.h>
+
+/* thread usage wraps very million seconds (approx one fortnight) */
+#define	NFSD_USAGE_WRAP	(HZ*1000000)
+
+#ifdef __KERNEL__
+
+struct nfsd_stats {
+	unsigned int	rchits;		/* repcache hits */
+	unsigned int	rcmisses;	/* repcache hits */
+	unsigned int	rcnocache;	/* uncached reqs */
+	unsigned int	fh_stale;	/* FH stale error */
+	unsigned int	fh_lookup;	/* dentry cached */
+	unsigned int	fh_anon;	/* anon file dentry returned */
+	unsigned int	fh_nocache_dir;	/* filehandle not found in dcache */
+	unsigned int	fh_nocache_nondir;	/* filehandle not found in dcache */
+	unsigned int	io_read;	/* bytes returned to read requests */
+	unsigned int	io_write;	/* bytes passed in write requests */
+	unsigned int	th_cnt;		/* number of available threads */
+	unsigned int	th_usage[10];	/* number of ticks during which n perdeciles
+					 * of available threads were in use */
+	unsigned int	th_fullcnt;	/* number of times last free thread was used */
+	unsigned int	ra_size;	/* size of ra cache */
+	unsigned int	ra_depth[11];	/* number of times ra entry was found that deep
+					 * in the cache (10percentiles). [10] = not found */
+#ifdef CONFIG_NFSD_V4
+	unsigned int	nfs4_opcount[LAST_NFS4_OP + 1];	/* count of individual nfsv4 operations */
+#endif
+
+};
+
+
+extern struct nfsd_stats	nfsdstats;
+extern struct svc_stat		nfsd_svcstats;
+
+void	nfsd_stat_init(void);
+void	nfsd_stat_shutdown(void);
+
+#endif /* __KERNEL__ */
+#endif /* LINUX_NFSD_STATS_H */
diff --git a/include/linux/nilfs2_fs.h b/include/linux/nilfs2_fs.h
new file mode 100644
index 00000000..89bd4a4d
--- /dev/null
+++ b/include/linux/nilfs2_fs.h
@@ -0,0 +1,852 @@
+/*
+ * nilfs2_fs.h - NILFS2 on-disk structures and common declarations.
+ *
+ * Copyright (C) 2005-2008 Nippon Telegraph and Telephone Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published
+ * by the Free Software Foundation; either version 2.1 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * Written by Koji Sato <koji@osrg.net>
+ *            Ryusuke Konishi <ryusuke@osrg.net>
+ */
+/*
+ *  linux/include/linux/ext2_fs.h
+ *
+ * Copyright (C) 1992, 1993, 1994, 1995
+ * Remy Card (card@masi.ibp.fr)
+ * Laboratoire MASI - Institut Blaise Pascal
+ * Universite Pierre et Marie Curie (Paris VI)
+ *
+ *  from
+ *
+ *  linux/include/linux/minix_fs.h
+ *
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ */
+
+#ifndef _LINUX_NILFS_FS_H
+#define _LINUX_NILFS_FS_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+#include <linux/magic.h>
+#include <linux/bug.h>
+
+
+#define NILFS_INODE_BMAP_SIZE	7
+/**
+ * struct nilfs_inode - structure of an inode on disk
+ * @i_blocks: blocks count
+ * @i_size: size in bytes
+ * @i_ctime: creation time (seconds)
+ * @i_mtime: modification time (seconds)
+ * @i_ctime_nsec: creation time (nano seconds)
+ * @i_mtime_nsec: modification time (nano seconds)
+ * @i_uid: user id
+ * @i_gid: group id
+ * @i_mode: file mode
+ * @i_links_count: links count
+ * @i_flags: file flags
+ * @i_bmap: block mapping
+ * @i_xattr: extended attributes
+ * @i_generation: file generation (for NFS)
+ * @i_pad:	padding
+ */
+struct nilfs_inode {
+	__le64	i_blocks;
+	__le64	i_size;
+	__le64	i_ctime;
+	__le64	i_mtime;
+	__le32	i_ctime_nsec;
+	__le32	i_mtime_nsec;
+	__le32	i_uid;
+	__le32	i_gid;
+	__le16	i_mode;
+	__le16	i_links_count;
+	__le32	i_flags;
+	__le64	i_bmap[NILFS_INODE_BMAP_SIZE];
+#define i_device_code	i_bmap[0]
+	__le64	i_xattr;
+	__le32	i_generation;
+	__le32	i_pad;
+};
+
+/**
+ * struct nilfs_super_root - structure of super root
+ * @sr_sum: check sum
+ * @sr_bytes: byte count of the structure
+ * @sr_flags: flags (reserved)
+ * @sr_nongc_ctime: write time of the last segment not for cleaner operation
+ * @sr_dat: DAT file inode
+ * @sr_cpfile: checkpoint file inode
+ * @sr_sufile: segment usage file inode
+ */
+struct nilfs_super_root {
+	__le32 sr_sum;
+	__le16 sr_bytes;
+	__le16 sr_flags;
+	__le64 sr_nongc_ctime;
+	struct nilfs_inode sr_dat;
+	struct nilfs_inode sr_cpfile;
+	struct nilfs_inode sr_sufile;
+};
+
+#define NILFS_SR_MDT_OFFSET(inode_size, i)  \
+	((unsigned long)&((struct nilfs_super_root *)0)->sr_dat + \
+			(inode_size) * (i))
+#define NILFS_SR_DAT_OFFSET(inode_size)     NILFS_SR_MDT_OFFSET(inode_size, 0)
+#define NILFS_SR_CPFILE_OFFSET(inode_size)  NILFS_SR_MDT_OFFSET(inode_size, 1)
+#define NILFS_SR_SUFILE_OFFSET(inode_size)  NILFS_SR_MDT_OFFSET(inode_size, 2)
+#define NILFS_SR_BYTES(inode_size)	    NILFS_SR_MDT_OFFSET(inode_size, 3)
+
+/*
+ * Maximal mount counts
+ */
+#define NILFS_DFL_MAX_MNT_COUNT		50      /* 50 mounts */
+
+/*
+ * File system states (sbp->s_state, nilfs->ns_mount_state)
+ */
+#define NILFS_VALID_FS			0x0001  /* Unmounted cleanly */
+#define NILFS_ERROR_FS			0x0002  /* Errors detected */
+#define NILFS_RESIZE_FS			0x0004	/* Resize required */
+
+/*
+ * Mount flags (sbi->s_mount_opt)
+ */
+#define NILFS_MOUNT_ERROR_MODE		0x0070  /* Error mode mask */
+#define NILFS_MOUNT_ERRORS_CONT		0x0010  /* Continue on errors */
+#define NILFS_MOUNT_ERRORS_RO		0x0020  /* Remount fs ro on errors */
+#define NILFS_MOUNT_ERRORS_PANIC	0x0040  /* Panic on errors */
+#define NILFS_MOUNT_BARRIER		0x1000  /* Use block barriers */
+#define NILFS_MOUNT_STRICT_ORDER	0x2000  /* Apply strict in-order
+						   semantics also for data */
+#define NILFS_MOUNT_NORECOVERY		0x4000  /* Disable write access during
+						   mount-time recovery */
+#define NILFS_MOUNT_DISCARD		0x8000  /* Issue DISCARD requests */
+
+
+/**
+ * struct nilfs_super_block - structure of super block on disk
+ */
+struct nilfs_super_block {
+/*00*/	__le32	s_rev_level;		/* Revision level */
+	__le16	s_minor_rev_level;	/* minor revision level */
+	__le16	s_magic;		/* Magic signature */
+
+	__le16  s_bytes;		/* Bytes count of CRC calculation
+					   for this structure. s_reserved
+					   is excluded. */
+	__le16  s_flags;		/* flags */
+	__le32  s_crc_seed;		/* Seed value of CRC calculation */
+/*10*/	__le32	s_sum;			/* Check sum of super block */
+
+	__le32	s_log_block_size;	/* Block size represented as follows
+					   blocksize =
+					       1 << (s_log_block_size + 10) */
+	__le64  s_nsegments;		/* Number of segments in filesystem */
+/*20*/	__le64  s_dev_size;		/* block device size in bytes */
+	__le64	s_first_data_block;	/* 1st seg disk block number */
+/*30*/	__le32  s_blocks_per_segment;   /* number of blocks per full segment */
+	__le32	s_r_segments_percentage; /* Reserved segments percentage */
+
+	__le64  s_last_cno;		/* Last checkpoint number */
+/*40*/	__le64  s_last_pseg;		/* disk block addr pseg written last */
+	__le64  s_last_seq;             /* seq. number of seg written last */
+/*50*/	__le64	s_free_blocks_count;	/* Free blocks count */
+
+	__le64	s_ctime;		/* Creation time (execution time of
+					   newfs) */
+/*60*/	__le64	s_mtime;		/* Mount time */
+	__le64	s_wtime;		/* Write time */
+/*70*/	__le16	s_mnt_count;		/* Mount count */
+	__le16	s_max_mnt_count;	/* Maximal mount count */
+	__le16	s_state;		/* File system state */
+	__le16	s_errors;		/* Behaviour when detecting errors */
+	__le64	s_lastcheck;		/* time of last check */
+
+/*80*/	__le32	s_checkinterval;	/* max. time between checks */
+	__le32	s_creator_os;		/* OS */
+	__le16	s_def_resuid;		/* Default uid for reserved blocks */
+	__le16	s_def_resgid;		/* Default gid for reserved blocks */
+	__le32	s_first_ino;		/* First non-reserved inode */
+
+/*90*/	__le16  s_inode_size;		/* Size of an inode */
+	__le16  s_dat_entry_size;       /* Size of a dat entry */
+	__le16  s_checkpoint_size;      /* Size of a checkpoint */
+	__le16	s_segment_usage_size;	/* Size of a segment usage */
+
+/*98*/	__u8	s_uuid[16];		/* 128-bit uuid for volume */
+/*A8*/	char	s_volume_name[80];	/* volume name */
+
+/*F8*/	__le32  s_c_interval;           /* Commit interval of segment */
+	__le32  s_c_block_max;          /* Threshold of data amount for
+					   the segment construction */
+/*100*/	__le64  s_feature_compat;	/* Compatible feature set */
+	__le64  s_feature_compat_ro;	/* Read-only compatible feature set */
+	__le64  s_feature_incompat;	/* Incompatible feature set */
+	__u32	s_reserved[186];	/* padding to the end of the block */
+};
+
+/*
+ * Codes for operating systems
+ */
+#define NILFS_OS_LINUX		0
+/* Codes from 1 to 4 are reserved to keep compatibility with ext2 creator-OS */
+
+/*
+ * Revision levels
+ */
+#define NILFS_CURRENT_REV	2	/* current major revision */
+#define NILFS_MINOR_REV		0	/* minor revision */
+#define NILFS_MIN_SUPP_REV	2	/* minimum supported revision */
+
+/*
+ * Feature set definitions
+ *
+ * If there is a bit set in the incompatible feature set that the kernel
+ * doesn't know about, it should refuse to mount the filesystem.
+ */
+#define NILFS_FEATURE_COMPAT_RO_BLOCK_COUNT	0x00000001ULL
+
+#define NILFS_FEATURE_COMPAT_SUPP	0ULL
+#define NILFS_FEATURE_COMPAT_RO_SUPP	NILFS_FEATURE_COMPAT_RO_BLOCK_COUNT
+#define NILFS_FEATURE_INCOMPAT_SUPP	0ULL
+
+/*
+ * Bytes count of super_block for CRC-calculation
+ */
+#define NILFS_SB_BYTES  \
+	((long)&((struct nilfs_super_block *)0)->s_reserved)
+
+/*
+ * Special inode number
+ */
+#define NILFS_ROOT_INO		2	/* Root file inode */
+#define NILFS_DAT_INO		3	/* DAT file */
+#define NILFS_CPFILE_INO	4	/* checkpoint file */
+#define NILFS_SUFILE_INO	5	/* segment usage file */
+#define NILFS_IFILE_INO		6	/* ifile */
+#define NILFS_ATIME_INO		7	/* Atime file (reserved) */
+#define NILFS_XATTR_INO		8	/* Xattribute file (reserved) */
+#define NILFS_SKETCH_INO	10	/* Sketch file */
+#define NILFS_USER_INO		11	/* Fisrt user's file inode number */
+
+#define NILFS_SB_OFFSET_BYTES	1024	/* byte offset of nilfs superblock */
+
+#define NILFS_SEG_MIN_BLOCKS	16	/* Minimum number of blocks in
+					   a full segment */
+#define NILFS_PSEG_MIN_BLOCKS	2	/* Minimum number of blocks in
+					   a partial segment */
+#define NILFS_MIN_NRSVSEGS	8	/* Minimum number of reserved
+					   segments */
+
+/*
+ * We call DAT, cpfile, and sufile root metadata files.  Inodes of
+ * these files are written in super root block instead of ifile, and
+ * garbage collector doesn't keep any past versions of these files.
+ */
+#define NILFS_ROOT_METADATA_FILE(ino) \
+	((ino) >= NILFS_DAT_INO && (ino) <= NILFS_SUFILE_INO)
+
+/*
+ * bytes offset of secondary super block
+ */
+#define NILFS_SB2_OFFSET_BYTES(devsize)	((((devsize) >> 12) - 1) << 12)
+
+/*
+ * Maximal count of links to a file
+ */
+#define NILFS_LINK_MAX		32000
+
+/*
+ * Structure of a directory entry
+ *  (Same as ext2)
+ */
+
+#define NILFS_NAME_LEN 255
+
+/*
+ * Block size limitations
+ */
+#define NILFS_MIN_BLOCK_SIZE		1024
+#define NILFS_MAX_BLOCK_SIZE		65536
+
+/*
+ * The new version of the directory entry.  Since V0 structures are
+ * stored in intel byte order, and the name_len field could never be
+ * bigger than 255 chars, it's safe to reclaim the extra byte for the
+ * file_type field.
+ */
+struct nilfs_dir_entry {
+	__le64	inode;			/* Inode number */
+	__le16	rec_len;		/* Directory entry length */
+	__u8	name_len;		/* Name length */
+	__u8	file_type;
+	char	name[NILFS_NAME_LEN];	/* File name */
+	char    pad;
+};
+
+/*
+ * NILFS directory file types.  Only the low 3 bits are used.  The
+ * other bits are reserved for now.
+ */
+enum {
+	NILFS_FT_UNKNOWN,
+	NILFS_FT_REG_FILE,
+	NILFS_FT_DIR,
+	NILFS_FT_CHRDEV,
+	NILFS_FT_BLKDEV,
+	NILFS_FT_FIFO,
+	NILFS_FT_SOCK,
+	NILFS_FT_SYMLINK,
+	NILFS_FT_MAX
+};
+
+/*
+ * NILFS_DIR_PAD defines the directory entries boundaries
+ *
+ * NOTE: It must be a multiple of 8
+ */
+#define NILFS_DIR_PAD			8
+#define NILFS_DIR_ROUND			(NILFS_DIR_PAD - 1)
+#define NILFS_DIR_REC_LEN(name_len)	(((name_len) + 12 + NILFS_DIR_ROUND) & \
+					~NILFS_DIR_ROUND)
+#define NILFS_MAX_REC_LEN		((1<<16)-1)
+
+static inline unsigned nilfs_rec_len_from_disk(__le16 dlen)
+{
+	unsigned len = le16_to_cpu(dlen);
+
+#if !defined(__KERNEL__) || (PAGE_CACHE_SIZE >= 65536)
+	if (len == NILFS_MAX_REC_LEN)
+		return 1 << 16;
+#endif
+	return len;
+}
+
+static inline __le16 nilfs_rec_len_to_disk(unsigned len)
+{
+#if !defined(__KERNEL__) || (PAGE_CACHE_SIZE >= 65536)
+	if (len == (1 << 16))
+		return cpu_to_le16(NILFS_MAX_REC_LEN);
+	else if (len > (1 << 16))
+		BUG();
+#endif
+	return cpu_to_le16(len);
+}
+
+/**
+ * struct nilfs_finfo - file information
+ * @fi_ino: inode number
+ * @fi_cno: checkpoint number
+ * @fi_nblocks: number of blocks (including intermediate blocks)
+ * @fi_ndatablk: number of file data blocks
+ */
+struct nilfs_finfo {
+	__le64 fi_ino;
+	__le64 fi_cno;
+	__le32 fi_nblocks;
+	__le32 fi_ndatablk;
+	/* array of virtual block numbers */
+};
+
+/**
+ * struct nilfs_binfo_v - information for the block to which a virtual block number is assigned
+ * @bi_vblocknr: virtual block number
+ * @bi_blkoff: block offset
+ */
+struct nilfs_binfo_v {
+	__le64 bi_vblocknr;
+	__le64 bi_blkoff;
+};
+
+/**
+ * struct nilfs_binfo_dat - information for the block which belongs to the DAT file
+ * @bi_blkoff: block offset
+ * @bi_level: level
+ * @bi_pad: padding
+ */
+struct nilfs_binfo_dat {
+	__le64 bi_blkoff;
+	__u8 bi_level;
+	__u8 bi_pad[7];
+};
+
+/**
+ * union nilfs_binfo: block information
+ * @bi_v: nilfs_binfo_v structure
+ * @bi_dat: nilfs_binfo_dat structure
+ */
+union nilfs_binfo {
+	struct nilfs_binfo_v bi_v;
+	struct nilfs_binfo_dat bi_dat;
+};
+
+/**
+ * struct nilfs_segment_summary - segment summary
+ * @ss_datasum: checksum of data
+ * @ss_sumsum: checksum of segment summary
+ * @ss_magic: magic number
+ * @ss_bytes: size of this structure in bytes
+ * @ss_flags: flags
+ * @ss_seq: sequence number
+ * @ss_create: creation timestamp
+ * @ss_next: next segment
+ * @ss_nblocks: number of blocks
+ * @ss_nfinfo: number of finfo structures
+ * @ss_sumbytes: total size of segment summary in bytes
+ * @ss_pad: padding
+ * @ss_cno: checkpoint number
+ */
+struct nilfs_segment_summary {
+	__le32 ss_datasum;
+	__le32 ss_sumsum;
+	__le32 ss_magic;
+	__le16 ss_bytes;
+	__le16 ss_flags;
+	__le64 ss_seq;
+	__le64 ss_create;
+	__le64 ss_next;
+	__le32 ss_nblocks;
+	__le32 ss_nfinfo;
+	__le32 ss_sumbytes;
+	__le32 ss_pad;
+	__le64 ss_cno;
+	/* array of finfo structures */
+};
+
+#define NILFS_SEGSUM_MAGIC	0x1eaffa11  /* segment summary magic number */
+
+/*
+ * Segment summary flags
+ */
+#define NILFS_SS_LOGBGN 0x0001  /* begins a logical segment */
+#define NILFS_SS_LOGEND 0x0002  /* ends a logical segment */
+#define NILFS_SS_SR     0x0004  /* has super root */
+#define NILFS_SS_SYNDT  0x0008  /* includes data only updates */
+#define NILFS_SS_GC     0x0010  /* segment written for cleaner operation */
+
+/**
+ * struct nilfs_btree_node - B-tree node
+ * @bn_flags: flags
+ * @bn_level: level
+ * @bn_nchildren: number of children
+ * @bn_pad: padding
+ */
+struct nilfs_btree_node {
+	__u8 bn_flags;
+	__u8 bn_level;
+	__le16 bn_nchildren;
+	__le32 bn_pad;
+};
+
+/* flags */
+#define NILFS_BTREE_NODE_ROOT   0x01
+
+/* level */
+#define NILFS_BTREE_LEVEL_DATA          0
+#define NILFS_BTREE_LEVEL_NODE_MIN      (NILFS_BTREE_LEVEL_DATA + 1)
+#define NILFS_BTREE_LEVEL_MAX           14
+
+/**
+ * struct nilfs_palloc_group_desc - block group descriptor
+ * @pg_nfrees: number of free entries in block group
+ */
+struct nilfs_palloc_group_desc {
+	__le32 pg_nfrees;
+};
+
+/**
+ * struct nilfs_dat_entry - disk address translation entry
+ * @de_blocknr: block number
+ * @de_start: start checkpoint number
+ * @de_end: end checkpoint number
+ * @de_rsv: reserved for future use
+ */
+struct nilfs_dat_entry {
+	__le64 de_blocknr;
+	__le64 de_start;
+	__le64 de_end;
+	__le64 de_rsv;
+};
+
+/**
+ * struct nilfs_snapshot_list - snapshot list
+ * @ssl_next: next checkpoint number on snapshot list
+ * @ssl_prev: previous checkpoint number on snapshot list
+ */
+struct nilfs_snapshot_list {
+	__le64 ssl_next;
+	__le64 ssl_prev;
+};
+
+/**
+ * struct nilfs_checkpoint - checkpoint structure
+ * @cp_flags: flags
+ * @cp_checkpoints_count: checkpoints count in a block
+ * @cp_snapshot_list: snapshot list
+ * @cp_cno: checkpoint number
+ * @cp_create: creation timestamp
+ * @cp_nblk_inc: number of blocks incremented by this checkpoint
+ * @cp_inodes_count: inodes count
+ * @cp_blocks_count: blocks count
+ * @cp_ifile_inode: inode of ifile
+ */
+struct nilfs_checkpoint {
+	__le32 cp_flags;
+	__le32 cp_checkpoints_count;
+	struct nilfs_snapshot_list cp_snapshot_list;
+	__le64 cp_cno;
+	__le64 cp_create;
+	__le64 cp_nblk_inc;
+	__le64 cp_inodes_count;
+	__le64 cp_blocks_count;
+
+	/* Do not change the byte offset of ifile inode.
+	   To keep the compatibility of the disk format,
+	   additional fields should be added behind cp_ifile_inode. */
+	struct nilfs_inode cp_ifile_inode;
+};
+
+/* checkpoint flags */
+enum {
+	NILFS_CHECKPOINT_SNAPSHOT,
+	NILFS_CHECKPOINT_INVALID,
+	NILFS_CHECKPOINT_SKETCH,
+	NILFS_CHECKPOINT_MINOR,
+};
+
+#define NILFS_CHECKPOINT_FNS(flag, name)				\
+static inline void							\
+nilfs_checkpoint_set_##name(struct nilfs_checkpoint *cp)		\
+{									\
+	cp->cp_flags = cpu_to_le32(le32_to_cpu(cp->cp_flags) |		\
+				   (1UL << NILFS_CHECKPOINT_##flag));	\
+}									\
+static inline void							\
+nilfs_checkpoint_clear_##name(struct nilfs_checkpoint *cp)		\
+{									\
+	cp->cp_flags = cpu_to_le32(le32_to_cpu(cp->cp_flags) &		\
+				   ~(1UL << NILFS_CHECKPOINT_##flag));	\
+}									\
+static inline int							\
+nilfs_checkpoint_##name(const struct nilfs_checkpoint *cp)		\
+{									\
+	return !!(le32_to_cpu(cp->cp_flags) &				\
+		  (1UL << NILFS_CHECKPOINT_##flag));			\
+}
+
+NILFS_CHECKPOINT_FNS(SNAPSHOT, snapshot)
+NILFS_CHECKPOINT_FNS(INVALID, invalid)
+NILFS_CHECKPOINT_FNS(MINOR, minor)
+
+/**
+ * struct nilfs_cpinfo - checkpoint information
+ * @ci_flags: flags
+ * @ci_pad: padding
+ * @ci_cno: checkpoint number
+ * @ci_create: creation timestamp
+ * @ci_nblk_inc: number of blocks incremented by this checkpoint
+ * @ci_inodes_count: inodes count
+ * @ci_blocks_count: blocks count
+ * @ci_next: next checkpoint number in snapshot list
+ */
+struct nilfs_cpinfo {
+	__u32 ci_flags;
+	__u32 ci_pad;
+	__u64 ci_cno;
+	__u64 ci_create;
+	__u64 ci_nblk_inc;
+	__u64 ci_inodes_count;
+	__u64 ci_blocks_count;
+	__u64 ci_next;
+};
+
+#define NILFS_CPINFO_FNS(flag, name)					\
+static inline int							\
+nilfs_cpinfo_##name(const struct nilfs_cpinfo *cpinfo)			\
+{									\
+	return !!(cpinfo->ci_flags & (1UL << NILFS_CHECKPOINT_##flag));	\
+}
+
+NILFS_CPINFO_FNS(SNAPSHOT, snapshot)
+NILFS_CPINFO_FNS(INVALID, invalid)
+NILFS_CPINFO_FNS(MINOR, minor)
+
+
+/**
+ * struct nilfs_cpfile_header - checkpoint file header
+ * @ch_ncheckpoints: number of checkpoints
+ * @ch_nsnapshots: number of snapshots
+ * @ch_snapshot_list: snapshot list
+ */
+struct nilfs_cpfile_header {
+	__le64 ch_ncheckpoints;
+	__le64 ch_nsnapshots;
+	struct nilfs_snapshot_list ch_snapshot_list;
+};
+
+#define NILFS_CPFILE_FIRST_CHECKPOINT_OFFSET	\
+	((sizeof(struct nilfs_cpfile_header) +				\
+	  sizeof(struct nilfs_checkpoint) - 1) /			\
+			sizeof(struct nilfs_checkpoint))
+
+/**
+ * struct nilfs_segment_usage - segment usage
+ * @su_lastmod: last modified timestamp
+ * @su_nblocks: number of blocks in segment
+ * @su_flags: flags
+ */
+struct nilfs_segment_usage {
+	__le64 su_lastmod;
+	__le32 su_nblocks;
+	__le32 su_flags;
+};
+
+/* segment usage flag */
+enum {
+	NILFS_SEGMENT_USAGE_ACTIVE,
+	NILFS_SEGMENT_USAGE_DIRTY,
+	NILFS_SEGMENT_USAGE_ERROR,
+
+	/* ... */
+};
+
+#define NILFS_SEGMENT_USAGE_FNS(flag, name)				\
+static inline void							\
+nilfs_segment_usage_set_##name(struct nilfs_segment_usage *su)		\
+{									\
+	su->su_flags = cpu_to_le32(le32_to_cpu(su->su_flags) |		\
+				   (1UL << NILFS_SEGMENT_USAGE_##flag));\
+}									\
+static inline void							\
+nilfs_segment_usage_clear_##name(struct nilfs_segment_usage *su)	\
+{									\
+	su->su_flags =							\
+		cpu_to_le32(le32_to_cpu(su->su_flags) &			\
+			    ~(1UL << NILFS_SEGMENT_USAGE_##flag));      \
+}									\
+static inline int							\
+nilfs_segment_usage_##name(const struct nilfs_segment_usage *su)	\
+{									\
+	return !!(le32_to_cpu(su->su_flags) &				\
+		  (1UL << NILFS_SEGMENT_USAGE_##flag));			\
+}
+
+NILFS_SEGMENT_USAGE_FNS(ACTIVE, active)
+NILFS_SEGMENT_USAGE_FNS(DIRTY, dirty)
+NILFS_SEGMENT_USAGE_FNS(ERROR, error)
+
+static inline void
+nilfs_segment_usage_set_clean(struct nilfs_segment_usage *su)
+{
+	su->su_lastmod = cpu_to_le64(0);
+	su->su_nblocks = cpu_to_le32(0);
+	su->su_flags = cpu_to_le32(0);
+}
+
+static inline int
+nilfs_segment_usage_clean(const struct nilfs_segment_usage *su)
+{
+	return !le32_to_cpu(su->su_flags);
+}
+
+/**
+ * struct nilfs_sufile_header - segment usage file header
+ * @sh_ncleansegs: number of clean segments
+ * @sh_ndirtysegs: number of dirty segments
+ * @sh_last_alloc: last allocated segment number
+ */
+struct nilfs_sufile_header {
+	__le64 sh_ncleansegs;
+	__le64 sh_ndirtysegs;
+	__le64 sh_last_alloc;
+	/* ... */
+};
+
+#define NILFS_SUFILE_FIRST_SEGMENT_USAGE_OFFSET	\
+	((sizeof(struct nilfs_sufile_header) +				\
+	  sizeof(struct nilfs_segment_usage) - 1) /			\
+			 sizeof(struct nilfs_segment_usage))
+
+/**
+ * nilfs_suinfo - segment usage information
+ * @sui_lastmod:
+ * @sui_nblocks:
+ * @sui_flags:
+ */
+struct nilfs_suinfo {
+	__u64 sui_lastmod;
+	__u32 sui_nblocks;
+	__u32 sui_flags;
+};
+
+#define NILFS_SUINFO_FNS(flag, name)					\
+static inline int							\
+nilfs_suinfo_##name(const struct nilfs_suinfo *si)			\
+{									\
+	return si->sui_flags & (1UL << NILFS_SEGMENT_USAGE_##flag);	\
+}
+
+NILFS_SUINFO_FNS(ACTIVE, active)
+NILFS_SUINFO_FNS(DIRTY, dirty)
+NILFS_SUINFO_FNS(ERROR, error)
+
+static inline int nilfs_suinfo_clean(const struct nilfs_suinfo *si)
+{
+	return !si->sui_flags;
+}
+
+/* ioctl */
+enum {
+	NILFS_CHECKPOINT,
+	NILFS_SNAPSHOT,
+};
+
+/**
+ * struct nilfs_cpmode -
+ * @cc_cno:
+ * @cc_mode:
+ */
+struct nilfs_cpmode {
+	__u64 cm_cno;
+	__u32 cm_mode;
+	__u32 cm_pad;
+};
+
+/**
+ * struct nilfs_argv - argument vector
+ * @v_base:
+ * @v_nmembs:
+ * @v_size:
+ * @v_flags:
+ * @v_index:
+ */
+struct nilfs_argv {
+	__u64 v_base;
+	__u32 v_nmembs;	/* number of members */
+	__u16 v_size;	/* size of members */
+	__u16 v_flags;
+	__u64 v_index;
+};
+
+/**
+ * struct nilfs_period -
+ * @p_start:
+ * @p_end:
+ */
+struct nilfs_period {
+	__u64 p_start;
+	__u64 p_end;
+};
+
+/**
+ * struct nilfs_cpstat -
+ * @cs_cno: checkpoint number
+ * @cs_ncps: number of checkpoints
+ * @cs_nsss: number of snapshots
+ */
+struct nilfs_cpstat {
+	__u64 cs_cno;
+	__u64 cs_ncps;
+	__u64 cs_nsss;
+};
+
+/**
+ * struct nilfs_sustat -
+ * @ss_nsegs: number of segments
+ * @ss_ncleansegs: number of clean segments
+ * @ss_ndirtysegs: number of dirty segments
+ * @ss_ctime: creation time of the last segment
+ * @ss_nongc_ctime: creation time of the last segment not for GC
+ * @ss_prot_seq: least sequence number of segments which must not be reclaimed
+ */
+struct nilfs_sustat {
+	__u64 ss_nsegs;
+	__u64 ss_ncleansegs;
+	__u64 ss_ndirtysegs;
+	__u64 ss_ctime;
+	__u64 ss_nongc_ctime;
+	__u64 ss_prot_seq;
+};
+
+/**
+ * struct nilfs_vinfo - virtual block number information
+ * @vi_vblocknr:
+ * @vi_start:
+ * @vi_end:
+ * @vi_blocknr:
+ */
+struct nilfs_vinfo {
+	__u64 vi_vblocknr;
+	__u64 vi_start;
+	__u64 vi_end;
+	__u64 vi_blocknr;
+};
+
+/**
+ * struct nilfs_vdesc -
+ */
+struct nilfs_vdesc {
+	__u64 vd_ino;
+	__u64 vd_cno;
+	__u64 vd_vblocknr;
+	struct nilfs_period vd_period;
+	__u64 vd_blocknr;
+	__u64 vd_offset;
+	__u32 vd_flags;
+	__u32 vd_pad;
+};
+
+/**
+ * struct nilfs_bdesc -
+ */
+struct nilfs_bdesc {
+	__u64 bd_ino;
+	__u64 bd_oblocknr;
+	__u64 bd_blocknr;
+	__u64 bd_offset;
+	__u32 bd_level;
+	__u32 bd_pad;
+};
+
+#define NILFS_IOCTL_IDENT		'n'
+
+#define NILFS_IOCTL_CHANGE_CPMODE  \
+	_IOW(NILFS_IOCTL_IDENT, 0x80, struct nilfs_cpmode)
+#define NILFS_IOCTL_DELETE_CHECKPOINT  \
+	_IOW(NILFS_IOCTL_IDENT, 0x81, __u64)
+#define NILFS_IOCTL_GET_CPINFO  \
+	_IOR(NILFS_IOCTL_IDENT, 0x82, struct nilfs_argv)
+#define NILFS_IOCTL_GET_CPSTAT  \
+	_IOR(NILFS_IOCTL_IDENT, 0x83, struct nilfs_cpstat)
+#define NILFS_IOCTL_GET_SUINFO  \
+	_IOR(NILFS_IOCTL_IDENT, 0x84, struct nilfs_argv)
+#define NILFS_IOCTL_GET_SUSTAT  \
+	_IOR(NILFS_IOCTL_IDENT, 0x85, struct nilfs_sustat)
+#define NILFS_IOCTL_GET_VINFO  \
+	_IOWR(NILFS_IOCTL_IDENT, 0x86, struct nilfs_argv)
+#define NILFS_IOCTL_GET_BDESCS  \
+	_IOWR(NILFS_IOCTL_IDENT, 0x87, struct nilfs_argv)
+#define NILFS_IOCTL_CLEAN_SEGMENTS  \
+	_IOW(NILFS_IOCTL_IDENT, 0x88, struct nilfs_argv[5])
+#define NILFS_IOCTL_SYNC  \
+	_IOR(NILFS_IOCTL_IDENT, 0x8A, __u64)
+#define NILFS_IOCTL_RESIZE  \
+	_IOW(NILFS_IOCTL_IDENT, 0x8B, __u64)
+#define NILFS_IOCTL_SET_ALLOC_RANGE  \
+	_IOW(NILFS_IOCTL_IDENT, 0x8C, __u64[2])
+
+#endif	/* _LINUX_NILFS_FS_H */
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
new file mode 100644
index 00000000..e474f6e7
--- /dev/null
+++ b/include/linux/nl80211.h
@@ -0,0 +1,2866 @@
+#ifndef __LINUX_NL80211_H
+#define __LINUX_NL80211_H
+/*
+ * 802.11 netlink interface public header
+ *
+ * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2008 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com>
+ * Copyright 2008 Michael Buesch <m@bues.ch>
+ * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
+ * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
+ * Copyright 2008 Colin McCabe <colin@cozybit.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/types.h>
+
+/**
+ * DOC: Station handling
+ *
+ * Stations are added per interface, but a special case exists with VLAN
+ * interfaces. When a station is bound to an AP interface, it may be moved
+ * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN).
+ * The station is still assumed to belong to the AP interface it was added
+ * to.
+ *
+ * TODO: need more info?
+ */
+
+/**
+ * DOC: Frame transmission/registration support
+ *
+ * Frame transmission and registration support exists to allow userspace
+ * management entities such as wpa_supplicant react to management frames
+ * that are not being handled by the kernel. This includes, for example,
+ * certain classes of action frames that cannot be handled in the kernel
+ * for various reasons.
+ *
+ * Frame registration is done on a per-interface basis and registrations
+ * cannot be removed other than by closing the socket. It is possible to
+ * specify a registration filter to register, for example, only for a
+ * certain type of action frame. In particular with action frames, those
+ * that userspace registers for will not be returned as unhandled by the
+ * driver, so that the registered application has to take responsibility
+ * for doing that.
+ *
+ * The type of frame that can be registered for is also dependent on the
+ * driver and interface type. The frame types are advertised in wiphy
+ * attributes so applications know what to expect.
+ *
+ * NOTE: When an interface changes type while registrations are active,
+ *       these registrations are ignored until the interface type is
+ *       changed again. This means that changing the interface type can
+ *       lead to a situation that couldn't otherwise be produced, but
+ *       any such registrations will be dormant in the sense that they
+ *       will not be serviced, i.e. they will not receive any frames.
+ *
+ * Frame transmission allows userspace to send for example the required
+ * responses to action frames. It is subject to some sanity checking,
+ * but many frames can be transmitted. When a frame was transmitted, its
+ * status is indicated to the sending socket.
+ *
+ * For more technical details, see the corresponding command descriptions
+ * below.
+ */
+
+/**
+ * DOC: Virtual interface / concurrency capabilities
+ *
+ * Some devices are able to operate with virtual MACs, they can have
+ * more than one virtual interface. The capability handling for this
+ * is a bit complex though, as there may be a number of restrictions
+ * on the types of concurrency that are supported.
+ *
+ * To start with, each device supports the interface types listed in
+ * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the
+ * types there no concurrency is implied.
+ *
+ * Once concurrency is desired, more attributes must be observed:
+ * To start with, since some interface types are purely managed in
+ * software, like the AP-VLAN type in mac80211 for example, there's
+ * an additional list of these, they can be added at any time and
+ * are only restricted by some semantic restrictions (e.g. AP-VLAN
+ * cannot be added without a corresponding AP interface). This list
+ * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
+ *
+ * Further, the list of supported combinations is exported. This is
+ * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically,
+ * it exports a list of "groups", and at any point in time the
+ * interfaces that are currently active must fall into any one of
+ * the advertised groups. Within each group, there are restrictions
+ * on the number of interfaces of different types that are supported
+ * and also the number of different channels, along with potentially
+ * some other restrictions. See &enum nl80211_if_combination_attrs.
+ *
+ * All together, these attributes define the concurrency of virtual
+ * interfaces that a given device supports.
+ */
+
+/**
+ * enum nl80211_commands - supported nl80211 commands
+ *
+ * @NL80211_CMD_UNSPEC: unspecified command to catch errors
+ *
+ * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request
+ *	to get a list of all present wiphys.
+ * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
+ *	%NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
+ *	%NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ,
+ *	%NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT,
+ *	%NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
+ *	and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
+ *	However, for setting the channel, see %NL80211_CMD_SET_CHANNEL
+ *	instead, the support here is for backward compatibility only.
+ * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
+ *	or rename notification. Has attributes %NL80211_ATTR_WIPHY and
+ *	%NL80211_ATTR_WIPHY_NAME.
+ * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes
+ *	%NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
+ *
+ * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
+ *	either a dump request on a %NL80211_ATTR_WIPHY or a specific get
+ *	on an %NL80211_ATTR_IFINDEX is supported.
+ * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
+ *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
+ * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
+ *	to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX,
+ *	%NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also
+ *	be sent from userspace to request creation of a new virtual interface,
+ *	then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and
+ *	%NL80211_ATTR_IFNAME.
+ * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes
+ *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from
+ *	userspace to request deletion of a virtual interface, then requires
+ *	attribute %NL80211_ATTR_IFINDEX.
+ *
+ * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified
+ *	by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC.
+ * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT,
+ *	%NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD.
+ * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA,
+ *	%NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER,
+ *	and %NL80211_ATTR_KEY_SEQ attributes.
+ * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX
+ *	or %NL80211_ATTR_MAC.
+ *
+ * @NL80211_CMD_GET_BEACON: (not used)
+ * @NL80211_CMD_SET_BEACON: change the beacon on an access point interface
+ *	using the %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL
+ *	attributes. For drivers that generate the beacon and probe responses
+ *	internally, the following attributes must be provided: %NL80211_ATTR_IE,
+ *	%NL80211_ATTR_IE_PROBE_RESP and %NL80211_ATTR_IE_ASSOC_RESP.
+ * @NL80211_CMD_START_AP: Start AP operation on an AP interface, parameters
+ *	are like for %NL80211_CMD_SET_BEACON, and additionally parameters that
+ *	do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL,
+ *	%NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID,
+ *	%NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
+ *	%NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
+ *	%NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
+ *	%NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT.
+ * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
+ * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface
+ * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP
+ *
+ * @NL80211_CMD_GET_STATION: Get station attributes for station identified by
+ *	%NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_SET_STATION: Set station attributes for station identified by
+ *	%NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the
+ *	the interface identified by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC
+ *	or, if no MAC address given, all stations, on the interface identified
+ *	by %NL80211_ATTR_IFINDEX.
+ *
+ * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
+ * 	destination %NL80211_ATTR_MAC on the interface identified by
+ * 	%NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_SET_MPATH:  Set mesh path attributes for mesh path to
+ * 	destination %NL80211_ATTR_MAC on the interface identified by
+ * 	%NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by
+ *	%NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
+ * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
+ *	%NL80211_ATTR_MAC.
+ * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
+ *	the interface identified by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
+ *	or, if no MAC address given, all mesh paths, on the interface identified
+ *	by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
+ *	%NL80211_ATTR_IFINDEX.
+ *
+ * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
+ * 	regulatory domain.
+ * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
+ *	after being queried by the kernel. CRDA replies by sending a regulatory
+ *	domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
+ *	current alpha2 if it found a match. It also provides
+ * 	NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
+ * 	regulatory rule is a nested set of attributes  given by
+ * 	%NL80211_ATTR_REG_RULE_FREQ_[START|END] and
+ * 	%NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
+ * 	%NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
+ * 	%NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
+ * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain
+ * 	to the specified ISO/IEC 3166-1 alpha2 country code. The core will
+ * 	store this as a valid request and then query userspace for it.
+ *
+ * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the
+ *	interface identified by %NL80211_ATTR_IFINDEX
+ *
+ * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the
+ *      interface identified by %NL80211_ATTR_IFINDEX
+ *
+ * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The
+ *	interface is identified with %NL80211_ATTR_IFINDEX and the management
+ *	frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be
+ *	added to the end of the specified management frame is specified with
+ *	%NL80211_ATTR_IE. If the command succeeds, the requested data will be
+ *	added to all specified management frames generated by
+ *	kernel/firmware/driver.
+ *	Note: This command has been removed and it is only reserved at this
+ *	point to avoid re-using existing command number. The functionality this
+ *	command was planned for has been provided with cleaner design with the
+ *	option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN,
+ *	NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE,
+ *	NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE.
+ *
+ * @NL80211_CMD_GET_SCAN: get scan results
+ * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
+ *	%NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
+ *	probe requests at CCK rate or not.
+ * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
+ *	NL80211_CMD_GET_SCAN and on the "scan" multicast group)
+ * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
+ *	partial scan results may be available
+ *
+ * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain
+ *	intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL.
+ *	Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS)
+ *	are passed, they are used in the probe requests.  For
+ *	broadcast, a broadcast SSID must be passed (ie. an empty
+ *	string).  If no SSID is passed, no probe requests are sent and
+ *	a passive scan is performed.  %NL80211_ATTR_SCAN_FREQUENCIES,
+ *	if passed, define which channels should be scanned; if not
+ *	passed, all channels allowed for the current regulatory domain
+ *	are used.  Extra IEs can also be passed from the userspace by
+ *	using the %NL80211_ATTR_IE attribute.
+ * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan.  Returns -ENOENT
+ *	if scheduled scan is not running.
+ * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
+ *	results available.
+ * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
+ *	stopped.  The driver may issue this event at any time during a
+ *	scheduled scan.  One reason for stopping the scan is if the hardware
+ *	does not support starting an association or a normal scan while running
+ *	a scheduled scan.  This event is also sent when the
+ *	%NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface
+ *	is brought down while a scheduled scan was running.
+ *
+ * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation
+ *      or noise level
+ * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
+ *	NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
+ *
+ * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
+ * 	has been changed and provides details of the request information
+ * 	that caused the change such as who initiated the regulatory request
+ * 	(%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
+ * 	(%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
+ * 	the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
+ * 	%NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
+ * 	set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
+ * 	%NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
+ * 	to (%NL80211_ATTR_REG_ALPHA2).
+ * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon
+ * 	has been found while world roaming thus enabling active scan or
+ * 	any mode of operation that initiates TX (beacons) on a channel
+ * 	where we would not have been able to do either before. As an example
+ * 	if you are world roaming (regulatory domain set to world or if your
+ * 	driver is using a custom world roaming regulatory domain) and while
+ * 	doing a passive scan on the 5 GHz band you find an AP there (if not
+ * 	on a DFS channel) you will now be able to actively scan for that AP
+ * 	or use AP mode on your card on that same channel. Note that this will
+ * 	never be used for channels 1-11 on the 2 GHz band as they are always
+ * 	enabled world wide. This beacon hint is only sent if your device had
+ * 	either disabled active scanning or beaconing on a channel. We send to
+ * 	userspace the wiphy on which we removed a restriction from
+ * 	(%NL80211_ATTR_WIPHY) and the channel on which this occurred
+ * 	before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
+ * 	the beacon hint was processed.
+ *
+ * @NL80211_CMD_AUTHENTICATE: authentication request and notification.
+ *	This command is used both as a command (request to authenticate) and
+ *	as an event on the "mlme" multicast group indicating completion of the
+ *	authentication process.
+ *	When used as a command, %NL80211_ATTR_IFINDEX is used to identify the
+ *	interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and
+ *	BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
+ *	the SSID (mainly for association, but is included in authentication
+ *	request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used
+ *	to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE
+ *	is used to specify the authentication type. %NL80211_ATTR_IE is used to
+ *	define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs)
+ *	to be added to the frame.
+ *	When used as an event, this reports reception of an Authentication
+ *	frame in station and IBSS modes when the local MLME processed the
+ *	frame, i.e., it was for the local STA and was received in correct
+ *	state. This is similar to MLME-AUTHENTICATE.confirm primitive in the
+ *	MLME SAP interface (kernel providing MLME, userspace SME). The
+ *	included %NL80211_ATTR_FRAME attribute contains the management frame
+ *	(including both the header and frame body, but not FCS). This event is
+ *	also used to indicate if the authentication attempt timed out. In that
+ *	case the %NL80211_ATTR_FRAME attribute is replaced with a
+ *	%NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which
+ *	pending authentication timed out).
+ * @NL80211_CMD_ASSOCIATE: association request and notification; like
+ *	NL80211_CMD_AUTHENTICATE but for Association and Reassociation
+ *	(similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request,
+ *	MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives).
+ * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like
+ *	NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to
+ *	MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication
+ *	primitives).
+ * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like
+ *	NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to
+ *	MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives).
+ *
+ * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael
+ *	MIC (part of TKIP) failure; sent on the "mlme" multicast group; the
+ *	event includes %NL80211_ATTR_MAC to describe the source MAC address of
+ *	the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key
+ *	type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and
+ *	%NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this
+ *	event matches with MLME-MICHAELMICFAILURE.indication() primitive
+ *
+ * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a
+ *	FREQ attribute (for the initial frequency if no peer can be found)
+ *	and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those
+ *	should be fixed rather than automatically determined. Can only be
+ *	executed on a network interface that is UP, and fixed BSSID/FREQ
+ *	may be rejected. Another optional parameter is the beacon interval,
+ *	given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not
+ *	given defaults to 100 TU (102.4ms).
+ * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is
+ *	determined by the network interface.
+ *
+ * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute
+ *	to identify the device, and the TESTDATA blob attribute to pass through
+ *	to the driver.
+ *
+ * @NL80211_CMD_CONNECT: connection request and notification; this command
+ *	requests to connect to a specified network but without separating
+ *	auth and assoc steps. For this, you need to specify the SSID in a
+ *	%NL80211_ATTR_SSID attribute, and can optionally specify the association
+ *	IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC,
+ *	%NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
+ *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE and
+ *	%NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT.
+ *	Background scan period can optionally be
+ *	specified in %NL80211_ATTR_BG_SCAN_PERIOD,
+ *	if not specified default background scan configuration
+ *	in driver is used and if period value is 0, bg scan will be disabled.
+ *	This attribute is ignored if driver does not support roam scan.
+ *	It is also sent as an event, with the BSSID and response IEs when the
+ *	connection is established or failed to be established. This can be
+ *	determined by the STATUS_CODE attribute.
+ * @NL80211_CMD_ROAM: request that the card roam (currently not implemented),
+ *	sent as an event when the card/driver roamed by itself.
+ * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
+ *	userspace that a connection was dropped by the AP or due to other
+ *	reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
+ *	%NL80211_ATTR_REASON_CODE attributes are used.
+ *
+ * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices
+ *	associated with this wiphy must be down and will follow.
+ *
+ * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified
+ *	channel for the specified amount of time. This can be used to do
+ *	off-channel operations like transmit a Public Action frame and wait for
+ *	a response while being associated to an AP on another channel.
+ *	%NL80211_ATTR_IFINDEX is used to specify which interface (and thus
+ *	radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
+ *	frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be
+ *	optionally used to specify additional channel parameters.
+ *	%NL80211_ATTR_DURATION is used to specify the duration in milliseconds
+ *	to remain on the channel. This command is also used as an event to
+ *	notify when the requested duration starts (it may take a while for the
+ *	driver to schedule this time due to other concurrent needs for the
+ *	radio).
+ *	When called, this operation returns a cookie (%NL80211_ATTR_COOKIE)
+ *	that will be included with any events pertaining to this request;
+ *	the cookie is also used to cancel the request.
+ * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a
+ *	pending remain-on-channel duration if the desired operation has been
+ *	completed prior to expiration of the originally requested duration.
+ *	%NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the
+ *	radio. The %NL80211_ATTR_COOKIE attribute must be given as well to
+ *	uniquely identify the request.
+ *	This command is also used as an event to notify when a requested
+ *	remain-on-channel duration has expired.
+ *
+ * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX
+ *	rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface
+ *	and @NL80211_ATTR_TX_RATES the set of allowed rates.
+ *
+ * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames
+ *	(via @NL80211_CMD_FRAME) for processing in userspace. This command
+ *	requires an interface index, a frame type attribute (optional for
+ *	backward compatibility reasons, if not given assumes action frames)
+ *	and a match attribute containing the first few bytes of the frame
+ *	that should match, e.g. a single byte for only a category match or
+ *	four bytes for vendor frames including the OUI. The registration
+ *	cannot be dropped, but is removed automatically when the netlink
+ *	socket is closed. Multiple registrations can be made.
+ * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for
+ *	backward compatibility
+ * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This
+ *	command is used both as a request to transmit a management frame and
+ *	as an event indicating reception of a frame that was not processed in
+ *	kernel code, but is for us (i.e., which may need to be processed in a
+ *	user space application). %NL80211_ATTR_FRAME is used to specify the
+ *	frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and
+ *	optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on
+ *	which channel the frame is to be transmitted or was received. If this
+ *	channel is not the current channel (remain-on-channel or the
+ *	operational channel) the device will switch to the given channel and
+ *	transmit the frame, optionally waiting for a response for the time
+ *	specified using %NL80211_ATTR_DURATION. When called, this operation
+ *	returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the
+ *	TX status event pertaining to the TX request.
+ *	%NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
+ *	management frames at CCK rate or not in 2GHz band.
+ * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this
+ *	command may be used with the corresponding cookie to cancel the wait
+ *	time if it is known that it is no longer necessary.
+ * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility.
+ * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame
+ *	transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies
+ *	the TX command and %NL80211_ATTR_FRAME includes the contents of the
+ *	frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged
+ *	the frame.
+ * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for
+ *	backward compatibility.
+ * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command
+ *	is used to configure connection quality monitoring notification trigger
+ *	levels.
+ * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This
+ *	command is used as an event to indicate the that a trigger level was
+ *	reached.
+ * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ
+ *	and %NL80211_ATTR_WIPHY_CHANNEL_TYPE) the given interface (identifed
+ *	by %NL80211_ATTR_IFINDEX) shall operate on.
+ *	In case multiple channels are supported by the device, the mechanism
+ *	with which it switches channels is implementation-defined.
+ *	When a monitor interface is given, it can only switch channel while
+ *	no other interfaces are operating to avoid disturbing the operation
+ *	of any other interfaces, and other interfaces will again take
+ *	precedence when they are used.
+ *
+ * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
+ *
+ * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial
+ *	mesh config parameters may be given.
+ * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the
+ *	network is determined by the network interface.
+ *
+ * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame
+ *	notification. This event is used to indicate that an unprotected
+ *	deauthentication frame was dropped when MFP is in use.
+ * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame
+ *	notification. This event is used to indicate that an unprotected
+ *	disassociation frame was dropped when MFP is in use.
+ *
+ * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a
+ *      beacon or probe response from a compatible mesh peer.  This is only
+ *      sent while no station information (sta_info) exists for the new peer
+ *      candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH is set.  On
+ *      reception of this notification, userspace may decide to create a new
+ *      station (@NL80211_CMD_NEW_STATION).  To stop this notification from
+ *      reoccurring, the userspace authentication daemon may want to create the
+ *      new station with the AUTHENTICATED flag unset and maybe change it later
+ *      depending on the authentication result.
+ *
+ * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings.
+ * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings.
+ *	Since wireless is more complex than wired ethernet, it supports
+ *	various triggers. These triggers can be configured through this
+ *	command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
+ *	more background information, see
+ *	http://wireless.kernel.org/en/users/Documentation/WoWLAN.
+ *
+ * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver
+ *	the necessary information for supporting GTK rekey offload. This
+ *	feature is typically used during WoWLAN. The configuration data
+ *	is contained in %NL80211_ATTR_REKEY_DATA (which is nested and
+ *	contains the data in sub-attributes). After rekeying happened,
+ *	this command may also be sent by the driver as an MLME event to
+ *	inform userspace of the new replay counter.
+ *
+ * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace
+ *	of PMKSA caching dandidates.
+ *
+ * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
+ * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame.
+ *
+ * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP
+ *	(or GO) interface (i.e. hostapd) to ask for unexpected frames to
+ *	implement sending deauth to stations that send unexpected class 3
+ *	frames. Also used as the event sent by the kernel when such a frame
+ *	is received.
+ *	For the event, the %NL80211_ATTR_MAC attribute carries the TA and
+ *	other attributes like the interface index are present.
+ *	If used as the command it must have an interface index and you can
+ *	only unsubscribe from the event by closing the socket. Subscription
+ *	is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events.
+ *
+ * @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the
+ *	associated station identified by %NL80211_ATTR_MAC sent a 4addr frame
+ *	and wasn't already in a 4-addr VLAN. The event will be sent similarly
+ *	to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener.
+ *
+ * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface
+ *	by sending a null data frame to it and reporting when the frame is
+ *	acknowleged. This is used to allow timing out inactive clients. Uses
+ *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a
+ *	direct reply with an %NL80211_ATTR_COOKIE that is later used to match
+ *	up the event with the request. The event includes the same data and
+ *	has %NL80211_ATTR_ACK set if the frame was ACKed.
+ *
+ * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from
+ *	other BSSes when any interfaces are in AP mode. This helps implement
+ *	OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME
+ *	messages. Note that per PHY only one application may register.
+ *
+ * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether
+ *      No Acknowledgement Policy should be applied.
+ *
+ * @NL80211_CMD_MAX: highest used command number
+ * @__NL80211_CMD_AFTER_LAST: internal use
+ */
+enum nl80211_commands {
+/* don't change the order or add anything between, this is ABI! */
+	NL80211_CMD_UNSPEC,
+
+	NL80211_CMD_GET_WIPHY,		/* can dump */
+	NL80211_CMD_SET_WIPHY,
+	NL80211_CMD_NEW_WIPHY,
+	NL80211_CMD_DEL_WIPHY,
+
+	NL80211_CMD_GET_INTERFACE,	/* can dump */
+	NL80211_CMD_SET_INTERFACE,
+	NL80211_CMD_NEW_INTERFACE,
+	NL80211_CMD_DEL_INTERFACE,
+
+	NL80211_CMD_GET_KEY,
+	NL80211_CMD_SET_KEY,
+	NL80211_CMD_NEW_KEY,
+	NL80211_CMD_DEL_KEY,
+
+	NL80211_CMD_GET_BEACON,
+	NL80211_CMD_SET_BEACON,
+	NL80211_CMD_START_AP,
+	NL80211_CMD_NEW_BEACON = NL80211_CMD_START_AP,
+	NL80211_CMD_STOP_AP,
+	NL80211_CMD_DEL_BEACON = NL80211_CMD_STOP_AP,
+
+	NL80211_CMD_GET_STATION,
+	NL80211_CMD_SET_STATION,
+	NL80211_CMD_NEW_STATION,
+	NL80211_CMD_DEL_STATION,
+
+	NL80211_CMD_GET_MPATH,
+	NL80211_CMD_SET_MPATH,
+	NL80211_CMD_NEW_MPATH,
+	NL80211_CMD_DEL_MPATH,
+
+	NL80211_CMD_SET_BSS,
+
+	NL80211_CMD_SET_REG,
+	NL80211_CMD_REQ_SET_REG,
+
+	NL80211_CMD_GET_MESH_CONFIG,
+	NL80211_CMD_SET_MESH_CONFIG,
+
+	NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */,
+
+	NL80211_CMD_GET_REG,
+
+	NL80211_CMD_GET_SCAN,
+	NL80211_CMD_TRIGGER_SCAN,
+	NL80211_CMD_NEW_SCAN_RESULTS,
+	NL80211_CMD_SCAN_ABORTED,
+
+	NL80211_CMD_REG_CHANGE,
+
+	NL80211_CMD_AUTHENTICATE,
+	NL80211_CMD_ASSOCIATE,
+	NL80211_CMD_DEAUTHENTICATE,
+	NL80211_CMD_DISASSOCIATE,
+
+	NL80211_CMD_MICHAEL_MIC_FAILURE,
+
+	NL80211_CMD_REG_BEACON_HINT,
+
+	NL80211_CMD_JOIN_IBSS,
+	NL80211_CMD_LEAVE_IBSS,
+
+	NL80211_CMD_TESTMODE,
+
+	NL80211_CMD_CONNECT,
+	NL80211_CMD_ROAM,
+	NL80211_CMD_DISCONNECT,
+
+	NL80211_CMD_SET_WIPHY_NETNS,
+
+	NL80211_CMD_GET_SURVEY,
+	NL80211_CMD_NEW_SURVEY_RESULTS,
+
+	NL80211_CMD_SET_PMKSA,
+	NL80211_CMD_DEL_PMKSA,
+	NL80211_CMD_FLUSH_PMKSA,
+
+	NL80211_CMD_REMAIN_ON_CHANNEL,
+	NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL,
+
+	NL80211_CMD_SET_TX_BITRATE_MASK,
+
+	NL80211_CMD_REGISTER_FRAME,
+	NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME,
+	NL80211_CMD_FRAME,
+	NL80211_CMD_ACTION = NL80211_CMD_FRAME,
+	NL80211_CMD_FRAME_TX_STATUS,
+	NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS,
+
+	NL80211_CMD_SET_POWER_SAVE,
+	NL80211_CMD_GET_POWER_SAVE,
+
+	NL80211_CMD_SET_CQM,
+	NL80211_CMD_NOTIFY_CQM,
+
+	NL80211_CMD_SET_CHANNEL,
+	NL80211_CMD_SET_WDS_PEER,
+
+	NL80211_CMD_FRAME_WAIT_CANCEL,
+
+	NL80211_CMD_JOIN_MESH,
+	NL80211_CMD_LEAVE_MESH,
+
+	NL80211_CMD_UNPROT_DEAUTHENTICATE,
+	NL80211_CMD_UNPROT_DISASSOCIATE,
+
+	NL80211_CMD_NEW_PEER_CANDIDATE,
+
+	NL80211_CMD_GET_WOWLAN,
+	NL80211_CMD_SET_WOWLAN,
+
+	NL80211_CMD_START_SCHED_SCAN,
+	NL80211_CMD_STOP_SCHED_SCAN,
+	NL80211_CMD_SCHED_SCAN_RESULTS,
+	NL80211_CMD_SCHED_SCAN_STOPPED,
+
+	NL80211_CMD_SET_REKEY_OFFLOAD,
+
+	NL80211_CMD_PMKSA_CANDIDATE,
+
+	NL80211_CMD_TDLS_OPER,
+	NL80211_CMD_TDLS_MGMT,
+
+	NL80211_CMD_UNEXPECTED_FRAME,
+
+	NL80211_CMD_PROBE_CLIENT,
+
+	NL80211_CMD_REGISTER_BEACONS,
+
+	NL80211_CMD_UNEXPECTED_4ADDR_FRAME,
+
+	NL80211_CMD_SET_NOACK_MAP,
+
+	/* add new commands above here */
+
+	/* used to define NL80211_CMD_MAX below */
+	__NL80211_CMD_AFTER_LAST,
+	NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1
+};
+
+/*
+ * Allow user space programs to use #ifdef on new commands by defining them
+ * here
+ */
+#define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS
+#define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE
+#define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE
+#define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE
+#define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE
+#define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE
+#define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE
+#define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT
+
+#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
+
+/* source-level API compatibility */
+#define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG
+#define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG
+#define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE
+
+/**
+ * enum nl80211_attrs - nl80211 netlink attributes
+ *
+ * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors
+ *
+ * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf.
+ *	/sys/class/ieee80211/<phyname>/index
+ * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
+ * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
+ * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz
+ * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
+ *	if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included):
+ *	NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including
+ *		this attribute)
+ *	NL80211_CHAN_HT20 = HT20 only
+ *	NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel
+ *	NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel
+ * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is
+ *	less than or equal to the RTS threshold; allowed range: 1..255;
+ *	dot11ShortRetryLimit; u8
+ * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is
+ *	greater than the RTS threshold; allowed range: 1..255;
+ *	dot11ShortLongLimit; u8
+ * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum
+ *	length in octets for frames; allowed range: 256..8000, disable
+ *	fragmentation with (u32)-1; dot11FragmentationThreshold; u32
+ * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length
+ *	larger than or equal to this use RTS/CTS handshake); allowed range:
+ *	0..65536, disable with (u32)-1; dot11RTSThreshold; u32
+ * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11
+ *	section 7.3.2.9; dot11CoverageClass; u8
+ *
+ * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
+ * @NL80211_ATTR_IFNAME: network interface name
+ * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype
+ *
+ * @NL80211_ATTR_MAC: MAC address (various uses)
+ *
+ * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of
+ *	16 bytes encryption key followed by 8 bytes each for TX and RX MIC
+ *	keys
+ * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3)
+ * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
+ *	section 7.3.2.25.1, e.g. 0x000FAC04)
+ * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
+ *	CCMP keys, each six bytes in little endian
+ *
+ * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU
+ * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing
+ * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE
+ * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE
+ *
+ * @NL80211_ATTR_STA_AID: Association ID for the station (u16)
+ * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of
+ *	&enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2)
+ * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by
+ *	IEEE 802.11 7.3.1.6 (u16).
+ * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported
+ *	rates as defined by IEEE 802.11 7.3.2.2 but without the length
+ *	restriction (at most %NL80211_MAX_SUPP_RATES).
+ * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station
+ *	to, or the AP interface the station was originally added to to.
+ * @NL80211_ATTR_STA_INFO: information about a station, part of station info
+ *	given for %NL80211_CMD_GET_STATION, nested attribute containing
+ *	info as possible, see &enum nl80211_sta_info.
+ *
+ * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands,
+ *	consisting of a nested array.
+ *
+ * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
+ * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link.
+ * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
+ * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
+ * 	info given for %NL80211_CMD_GET_MPATH, nested attribute described at
+ *	&enum nl80211_mpath_info.
+ *
+ * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
+ *      &enum nl80211_mntr_flags.
+ *
+ * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the
+ * 	current regulatory domain should be set to or is already set to.
+ * 	For example, 'CR', for Costa Rica. This attribute is used by the kernel
+ * 	to query the CRDA to retrieve one regulatory domain. This attribute can
+ * 	also be used by userspace to query the kernel for the currently set
+ * 	regulatory domain. We chose an alpha2 as that is also used by the
+ * 	IEEE-802.11d country information element to identify a country.
+ * 	Users can also simply ask the wireless core to set regulatory domain
+ * 	to a specific alpha2.
+ * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory
+ *	rules.
+ *
+ * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1)
+ * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled
+ *	(u8, 0 or 1)
+ * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled
+ *	(u8, 0 or 1)
+ * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic
+ *	rates in format defined by IEEE 802.11 7.3.2.2 but without the length
+ *	restriction (at most %NL80211_MAX_SUPP_RATES).
+ *
+ * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from
+ *	association request when used with NL80211_CMD_NEW_STATION)
+ *
+ * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all
+ *	supported interface types, each a flag attribute with the number
+ *	of the interface mode.
+ *
+ * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for
+ *	%NL80211_CMD_SET_MGMT_EXTRA_IE.
+ *
+ * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with
+ *	%NL80211_CMD_SET_MGMT_EXTRA_IE).
+ *
+ * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with
+ *	a single scan request, a wiphy attribute.
+ * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can
+ *	scan with a single scheduled scan request, a wiphy attribute.
+ * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements
+ *	that can be added to a scan request
+ * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information
+ *	elements that can be added to a scheduled scan request
+ * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be
+ *	used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute.
+ *
+ * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
+ * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
+ *	scanning and include a zero-length SSID (wildcard) for wildcard scan
+ * @NL80211_ATTR_BSS: scan result BSS
+ *
+ * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain
+ * 	currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
+ * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently
+ * 	set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
+ *
+ * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies
+ *	an array of command numbers (i.e. a mapping index to command number)
+ *	that the driver for the given wiphy supports.
+ *
+ * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header
+ *	and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and
+ *	NL80211_CMD_ASSOCIATE events
+ * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets)
+ * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type,
+ *	represented as a u32
+ * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and
+ *	%NL80211_CMD_DISASSOCIATE, u16
+ *
+ * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as
+ *	a u32
+ *
+ * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change
+ * 	due to considerations from a beacon hint. This attribute reflects
+ * 	the state of the channel _before_ the beacon hint processing. This
+ * 	attributes consists of a nested attribute containing
+ * 	NL80211_FREQUENCY_ATTR_*
+ * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change
+ * 	due to considerations from a beacon hint. This attribute reflects
+ * 	the state of the channel _after_ the beacon hint processing. This
+ * 	attributes consists of a nested attribute containing
+ * 	NL80211_FREQUENCY_ATTR_*
+ *
+ * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported
+ *	cipher suites
+ *
+ * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look
+ *	for other networks on different channels
+ *
+ * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this
+ *	is used, e.g., with %NL80211_CMD_AUTHENTICATE event
+ *
+ * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is
+ *	used for the association (&enum nl80211_mfp, represented as a u32);
+ *	this attribute can be used
+ *	with %NL80211_CMD_ASSOCIATE request
+ *
+ * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
+ *	&struct nl80211_sta_flag_update.
+ *
+ * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls
+ *	IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in
+ *	station mode. If the flag is included in %NL80211_CMD_ASSOCIATE
+ *	request, the driver will assume that the port is unauthorized until
+ *	authorized by user space. Otherwise, port is marked authorized by
+ *	default in station mode.
+ * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the
+ *	ethertype that will be used for key negotiation. It can be
+ *	specified with the associate and connect commands. If it is not
+ *	specified, the value defaults to 0x888E (PAE, 802.1X). This
+ *	attribute is also used as a flag in the wiphy information to
+ *	indicate that protocols other than PAE are supported.
+ * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with
+ *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom
+ *	ethertype frames used for key negotiation must not be encrypted.
+ *
+ * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
+ *	We recommend using nested, driver-specific attributes within this.
+ *
+ * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT
+ *	event was due to the AP disconnecting the station, and not due to
+ *	a local disconnect request.
+ * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT
+ *	event (u16)
+ * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating
+ *	that protected APs should be used. This is also used with NEW_BEACON to
+ *	indicate that the BSS is to use protection.
+ *
+ * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON
+ *	to indicate which unicast key ciphers will be used with the connection
+ *	(an array of u32).
+ * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
+ *	indicate which group key cipher will be used with the connection (a
+ *	u32).
+ * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
+ *	indicate which WPA version(s) the AP we want to associate with is using
+ *	(a u32 with flags from &enum nl80211_wpa_versions).
+ * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
+ *	indicate which key management algorithm(s) to use (an array of u32).
+ *
+ * @NL80211_ATTR_REQ_IE: (Re)association request information elements as
+ *	sent out by the card, for ROAM and successful CONNECT events.
+ * @NL80211_ATTR_RESP_IE: (Re)association response information elements as
+ *	sent by peer, for ROAM and successful CONNECT events.
+ *
+ * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE
+ *	commands to specify using a reassociate frame
+ *
+ * @NL80211_ATTR_KEY: key information in a nested attribute with
+ *	%NL80211_KEY_* sub-attributes
+ * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect()
+ *	and join_ibss(), key information is in a nested attribute each
+ *	with %NL80211_KEY_* sub-attributes
+ *
+ * @NL80211_ATTR_PID: Process ID of a network namespace.
+ *
+ * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for
+ *	dumps. This number increases whenever the object list being
+ *	dumped changes, and as such userspace can verify that it has
+ *	obtained a complete and consistent snapshot by verifying that
+ *	all dump messages contain the same generation number. If it
+ *	changed then the list changed and the dump should be repeated
+ *	completely from scratch.
+ *
+ * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface
+ *
+ * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of
+ *      the survey response for %NL80211_CMD_GET_SURVEY, nested attribute
+ *      containing info as possible, see &enum survey_info.
+ *
+ * @NL80211_ATTR_PMKID: PMK material for PMKSA caching.
+ * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can
+ *	cache, a wiphy attribute.
+ *
+ * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32.
+ * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that
+ *	specifies the maximum duration that can be requested with the
+ *	remain-on-channel operation, in milliseconds, u32.
+ *
+ * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects.
+ *
+ * @NL80211_ATTR_TX_RATES: Nested set of attributes
+ *	(enum nl80211_tx_rate_attributes) describing TX rates per band. The
+ *	enum nl80211_band value is used as the index (nla_type() of the nested
+ *	data. If a band is not included, it will be configured to allow all
+ *	rates based on negotiated supported rates information. This attribute
+ *	is used with %NL80211_CMD_SET_TX_BITRATE_MASK.
+ *
+ * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
+ *	at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
+ * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the
+ *	@NL80211_CMD_REGISTER_FRAME command.
+ * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a
+ *	nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
+ *	information about which frame types can be transmitted with
+ *	%NL80211_CMD_FRAME.
+ * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a
+ *	nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
+ *	information about which frame types can be registered for RX.
+ *
+ * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
+ *	acknowledged by the recipient.
+ *
+ * @NL80211_ATTR_CQM: connection quality monitor configuration in a
+ *	nested attribute with %NL80211_ATTR_CQM_* sub-attributes.
+ *
+ * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command
+ *	is requesting a local authentication/association state change without
+ *	invoking actual management frame exchange. This can be used with
+ *	NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE,
+ *	NL80211_CMD_DISASSOCIATE.
+ *
+ * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations
+ *	connected to this BSS.
+ *
+ * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See
+ *      &enum nl80211_tx_power_setting for possible values.
+ * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units.
+ *      This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING
+ *      for non-automatic settings.
+ *
+ * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly
+ *	means support for per-station GTKs.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting.
+ *	This can be used to mask out antennas which are not attached or should
+ *	not be used for transmitting. If an antenna is not selected in this
+ *	bitmap the hardware is not allowed to transmit on this antenna.
+ *
+ *	Each bit represents one antenna, starting with antenna 1 at the first
+ *	bit. Depending on which antennas are selected in the bitmap, 802.11n
+ *	drivers can derive which chainmasks to use (if all antennas belonging to
+ *	a particular chain are disabled this chain should be disabled) and if
+ *	a chain has diversity antennas wether diversity should be used or not.
+ *	HT capabilities (STBC, TX Beamforming, Antenna selection) can be
+ *	derived from the available chains after applying the antenna mask.
+ *	Non-802.11n drivers can derive wether to use diversity or not.
+ *	Drivers may reject configurations or RX/TX mask combinations they cannot
+ *	support by returning -EINVAL.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving.
+ *	This can be used to mask out antennas which are not attached or should
+ *	not be used for receiving. If an antenna is not selected in this bitmap
+ *	the hardware should not be configured to receive on this antenna.
+ *	For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available
+ *	for configuration as TX antennas via the above parameters.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available
+ *	for configuration as RX antennas via the above parameters.
+ *
+ * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS
+ *
+ * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be
+ *	transmitted on another channel when the channel given doesn't match
+ *	the current channel. If the current channel doesn't match and this
+ *	flag isn't set, the frame will be rejected. This is also used as an
+ *	nl80211 capability flag.
+ *
+ * @NL80211_ATTR_BSS_HTOPMODE: HT operation mode (u16)
+ *
+ * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags
+ *	attributes, specifying what a key should be set as default as.
+ *	See &enum nl80211_key_default_types.
+ *
+ * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters.  These cannot be
+ *	changed once the mesh is active.
+ * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute
+ *	containing attributes from &enum nl80211_meshconf_params.
+ * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver
+ *	allows auth frames in a mesh to be passed to userspace for processing via
+ *	the @NL80211_MESH_SETUP_USERSPACE_AUTH flag.
+ * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as
+ *	defined in &enum nl80211_plink_state. Used when userspace is
+ *	driving the peer link management state machine.
+ *	@NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled.
+ *
+ * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy
+ *	capabilities, the supported WoWLAN triggers
+ * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to
+ *	indicate which WoW triggers should be enabled. This is also
+ *	used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN
+ *	triggers.
+
+ * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan
+ *	cycles, in msecs.
+
+ * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more
+ *	sets of attributes to match during scheduled scans.  Only BSSs
+ *	that match any of the sets will be reported.  These are
+ *	pass-thru filter rules.
+ *	For a match to succeed, the BSS must match all attributes of a
+ *	set.  Since not every hardware supports matching all types of
+ *	attributes, there is no guarantee that the reported BSSs are
+ *	fully complying with the match sets and userspace needs to be
+ *	able to ignore them by itself.
+ *	Thus, the implementation is somewhat hardware-dependent, but
+ *	this is only an optimization and the userspace application
+ *	needs to handle all the non-filtered results anyway.
+ *	If the match attributes don't make sense when combined with
+ *	the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID
+ *	is included in the probe request, but the match attributes
+ *	will never let it go through), -EINVAL may be returned.
+ *	If ommited, no filtering is done.
+ *
+ * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
+ *	interface combinations. In each nested item, it contains attributes
+ *	defined in &enum nl80211_if_combination_attrs.
+ * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
+ *	%NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that
+ *	are managed in software: interfaces of these types aren't subject to
+ *	any restrictions in their number or combinations.
+ *
+ * @%NL80211_ATTR_REKEY_DATA: nested attribute containing the information
+ *	necessary for GTK rekeying in the device, see &enum nl80211_rekey_data.
+ *
+ * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan,
+ *	nested array attribute containing an entry for each band, with the entry
+ *	being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but
+ *	without the length restriction (at most %NL80211_MAX_SUPP_RATES).
+ *
+ * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon
+ *	and Probe Response (when response to wildcard Probe Request); see
+ *	&enum nl80211_hidden_ssid, represented as a u32
+ *
+ * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame.
+ *	This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to
+ *	provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the
+ *	driver (or firmware) replies to Probe Request frames.
+ * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association
+ *	Response frames. This is used with %NL80211_CMD_NEW_BEACON and
+ *	%NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into
+ *	(Re)Association Response frames when the driver (or firmware) replies to
+ *	(Re)Association Request frames.
+ *
+ * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration
+ *	of the station, see &enum nl80211_sta_wme_attr.
+ * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working
+ *	as AP.
+ *
+ * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of
+ *	roaming to another AP in the same ESS if the signal lever is low.
+ *
+ * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching
+ *	candidate information, see &enum nl80211_pmksa_candidate_attr.
+ *
+ * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not
+ *	for management frames transmission. In order to avoid p2p probe/action
+ *	frames are being transmitted at CCK rate in 2GHz band, the user space
+ *	applications use this attribute.
+ *	This attribute is used with %NL80211_CMD_TRIGGER_SCAN and
+ *	%NL80211_CMD_FRAME commands.
+ *
+ * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup
+ *	request, link setup confirm, link teardown, etc.). Values are
+ *	described in the TDLS (802.11z) specification.
+ * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a
+ *	TDLS conversation between two devices.
+ * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see
+ *	&enum nl80211_tdls_operation, represented as a u8.
+ * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate
+ *	as a TDLS peer sta.
+ * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown
+ *	procedures should be performed by sending TDLS packets via
+ *	%NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be
+ *	used for asking the driver to perform a TDLS operation.
+ *
+ * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices
+ *	that have AP support to indicate that they have the AP SME integrated
+ *	with support for the features listed in this attribute, see
+ *	&enum nl80211_ap_sme_features.
+ *
+ * @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells
+ *	the driver to not wait for an acknowledgement. Note that due to this,
+ *	it will also not give a status callback nor return a cookie. This is
+ *	mostly useful for probe responses to save airtime.
+ *
+ * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from
+ *	&enum nl80211_feature_flags and is advertised in wiphy information.
+ * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe
+ *
+ *	requests while operating in AP-mode.
+ *	This attribute holds a bitmap of the supported protocols for
+ *	offloading (see &enum nl80211_probe_resp_offload_support_attr).
+ *
+ * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire
+ *	probe-response frame. The DA field in the 802.11 header is zero-ed out,
+ *	to be filled by the FW.
+ * @NL80211_ATTR_DISABLE_HT:  Force HT capable interfaces to disable
+ *      this feature.  Currently, only supported in mac80211 drivers.
+ * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
+ *      ATTR_HT_CAPABILITY to which attention should be paid.
+ *      Currently, only mac80211 NICs support this feature.
+ *      The values that may be configured are:
+ *       MCS rates, MAX-AMSDU, HT-20-40 and HT_CAP_SGI_40
+ *       AMPDU density and AMPDU factor.
+ *      All values are treated as suggestions and may be ignored
+ *      by the driver as required.  The actual values may be seen in
+ *      the station debugfs ht_caps file.
+ *
+ * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country
+ *    abides to when initiating radiation on DFS channels. A country maps
+ *    to one DFS region.
+ *
+ * @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of
+ *      up to 16 TIDs.
+ *
+ * @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be
+ *	used by the drivers which has MLME in firmware and does not have support
+ *	to report per station tx/rx activity to free up the staion entry from
+ *	the list. This needs to be used when the driver advertises the
+ *	capability to timeout the stations.
+ *
+ * @NL80211_ATTR_RX_SIGNAL_DBM: signal strength in dBm (as a 32-bit int);
+ *	this attribute is (depending on the driver capabilities) added to
+ *	received frames indicated with %NL80211_CMD_FRAME.
+ *
+ * @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds
+ *      or 0 to disable background scan.
+ *
+ * @NL80211_ATTR_MAX: highest attribute number currently defined
+ * @__NL80211_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_attrs {
+/* don't change the order or add anything between, this is ABI! */
+	NL80211_ATTR_UNSPEC,
+
+	NL80211_ATTR_WIPHY,
+	NL80211_ATTR_WIPHY_NAME,
+
+	NL80211_ATTR_IFINDEX,
+	NL80211_ATTR_IFNAME,
+	NL80211_ATTR_IFTYPE,
+
+	NL80211_ATTR_MAC,
+
+	NL80211_ATTR_KEY_DATA,
+	NL80211_ATTR_KEY_IDX,
+	NL80211_ATTR_KEY_CIPHER,
+	NL80211_ATTR_KEY_SEQ,
+	NL80211_ATTR_KEY_DEFAULT,
+
+	NL80211_ATTR_BEACON_INTERVAL,
+	NL80211_ATTR_DTIM_PERIOD,
+	NL80211_ATTR_BEACON_HEAD,
+	NL80211_ATTR_BEACON_TAIL,
+
+	NL80211_ATTR_STA_AID,
+	NL80211_ATTR_STA_FLAGS,
+	NL80211_ATTR_STA_LISTEN_INTERVAL,
+	NL80211_ATTR_STA_SUPPORTED_RATES,
+	NL80211_ATTR_STA_VLAN,
+	NL80211_ATTR_STA_INFO,
+
+	NL80211_ATTR_WIPHY_BANDS,
+
+	NL80211_ATTR_MNTR_FLAGS,
+
+	NL80211_ATTR_MESH_ID,
+	NL80211_ATTR_STA_PLINK_ACTION,
+	NL80211_ATTR_MPATH_NEXT_HOP,
+	NL80211_ATTR_MPATH_INFO,
+
+	NL80211_ATTR_BSS_CTS_PROT,
+	NL80211_ATTR_BSS_SHORT_PREAMBLE,
+	NL80211_ATTR_BSS_SHORT_SLOT_TIME,
+
+	NL80211_ATTR_HT_CAPABILITY,
+
+	NL80211_ATTR_SUPPORTED_IFTYPES,
+
+	NL80211_ATTR_REG_ALPHA2,
+	NL80211_ATTR_REG_RULES,
+
+	NL80211_ATTR_MESH_CONFIG,
+
+	NL80211_ATTR_BSS_BASIC_RATES,
+
+	NL80211_ATTR_WIPHY_TXQ_PARAMS,
+	NL80211_ATTR_WIPHY_FREQ,
+	NL80211_ATTR_WIPHY_CHANNEL_TYPE,
+
+	NL80211_ATTR_KEY_DEFAULT_MGMT,
+
+	NL80211_ATTR_MGMT_SUBTYPE,
+	NL80211_ATTR_IE,
+
+	NL80211_ATTR_MAX_NUM_SCAN_SSIDS,
+
+	NL80211_ATTR_SCAN_FREQUENCIES,
+	NL80211_ATTR_SCAN_SSIDS,
+	NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */
+	NL80211_ATTR_BSS,
+
+	NL80211_ATTR_REG_INITIATOR,
+	NL80211_ATTR_REG_TYPE,
+
+	NL80211_ATTR_SUPPORTED_COMMANDS,
+
+	NL80211_ATTR_FRAME,
+	NL80211_ATTR_SSID,
+	NL80211_ATTR_AUTH_TYPE,
+	NL80211_ATTR_REASON_CODE,
+
+	NL80211_ATTR_KEY_TYPE,
+
+	NL80211_ATTR_MAX_SCAN_IE_LEN,
+	NL80211_ATTR_CIPHER_SUITES,
+
+	NL80211_ATTR_FREQ_BEFORE,
+	NL80211_ATTR_FREQ_AFTER,
+
+	NL80211_ATTR_FREQ_FIXED,
+
+
+	NL80211_ATTR_WIPHY_RETRY_SHORT,
+	NL80211_ATTR_WIPHY_RETRY_LONG,
+	NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
+	NL80211_ATTR_WIPHY_RTS_THRESHOLD,
+
+	NL80211_ATTR_TIMED_OUT,
+
+	NL80211_ATTR_USE_MFP,
+
+	NL80211_ATTR_STA_FLAGS2,
+
+	NL80211_ATTR_CONTROL_PORT,
+
+	NL80211_ATTR_TESTDATA,
+
+	NL80211_ATTR_PRIVACY,
+
+	NL80211_ATTR_DISCONNECTED_BY_AP,
+	NL80211_ATTR_STATUS_CODE,
+
+	NL80211_ATTR_CIPHER_SUITES_PAIRWISE,
+	NL80211_ATTR_CIPHER_SUITE_GROUP,
+	NL80211_ATTR_WPA_VERSIONS,
+	NL80211_ATTR_AKM_SUITES,
+
+	NL80211_ATTR_REQ_IE,
+	NL80211_ATTR_RESP_IE,
+
+	NL80211_ATTR_PREV_BSSID,
+
+	NL80211_ATTR_KEY,
+	NL80211_ATTR_KEYS,
+
+	NL80211_ATTR_PID,
+
+	NL80211_ATTR_4ADDR,
+
+	NL80211_ATTR_SURVEY_INFO,
+
+	NL80211_ATTR_PMKID,
+	NL80211_ATTR_MAX_NUM_PMKIDS,
+
+	NL80211_ATTR_DURATION,
+
+	NL80211_ATTR_COOKIE,
+
+	NL80211_ATTR_WIPHY_COVERAGE_CLASS,
+
+	NL80211_ATTR_TX_RATES,
+
+	NL80211_ATTR_FRAME_MATCH,
+
+	NL80211_ATTR_ACK,
+
+	NL80211_ATTR_PS_STATE,
+
+	NL80211_ATTR_CQM,
+
+	NL80211_ATTR_LOCAL_STATE_CHANGE,
+
+	NL80211_ATTR_AP_ISOLATE,
+
+	NL80211_ATTR_WIPHY_TX_POWER_SETTING,
+	NL80211_ATTR_WIPHY_TX_POWER_LEVEL,
+
+	NL80211_ATTR_TX_FRAME_TYPES,
+	NL80211_ATTR_RX_FRAME_TYPES,
+	NL80211_ATTR_FRAME_TYPE,
+
+	NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
+	NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
+
+	NL80211_ATTR_SUPPORT_IBSS_RSN,
+
+	NL80211_ATTR_WIPHY_ANTENNA_TX,
+	NL80211_ATTR_WIPHY_ANTENNA_RX,
+
+	NL80211_ATTR_MCAST_RATE,
+
+	NL80211_ATTR_OFFCHANNEL_TX_OK,
+
+	NL80211_ATTR_BSS_HT_OPMODE,
+
+	NL80211_ATTR_KEY_DEFAULT_TYPES,
+
+	NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION,
+
+	NL80211_ATTR_MESH_SETUP,
+
+	NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX,
+	NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX,
+
+	NL80211_ATTR_SUPPORT_MESH_AUTH,
+	NL80211_ATTR_STA_PLINK_STATE,
+
+	NL80211_ATTR_WOWLAN_TRIGGERS,
+	NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED,
+
+	NL80211_ATTR_SCHED_SCAN_INTERVAL,
+
+	NL80211_ATTR_INTERFACE_COMBINATIONS,
+	NL80211_ATTR_SOFTWARE_IFTYPES,
+
+	NL80211_ATTR_REKEY_DATA,
+
+	NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS,
+	NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN,
+
+	NL80211_ATTR_SCAN_SUPP_RATES,
+
+	NL80211_ATTR_HIDDEN_SSID,
+
+	NL80211_ATTR_IE_PROBE_RESP,
+	NL80211_ATTR_IE_ASSOC_RESP,
+
+	NL80211_ATTR_STA_WME,
+	NL80211_ATTR_SUPPORT_AP_UAPSD,
+
+	NL80211_ATTR_ROAM_SUPPORT,
+
+	NL80211_ATTR_SCHED_SCAN_MATCH,
+	NL80211_ATTR_MAX_MATCH_SETS,
+
+	NL80211_ATTR_PMKSA_CANDIDATE,
+
+	NL80211_ATTR_TX_NO_CCK_RATE,
+
+	NL80211_ATTR_TDLS_ACTION,
+	NL80211_ATTR_TDLS_DIALOG_TOKEN,
+	NL80211_ATTR_TDLS_OPERATION,
+	NL80211_ATTR_TDLS_SUPPORT,
+	NL80211_ATTR_TDLS_EXTERNAL_SETUP,
+
+	NL80211_ATTR_DEVICE_AP_SME,
+
+	NL80211_ATTR_DONT_WAIT_FOR_ACK,
+
+	NL80211_ATTR_FEATURE_FLAGS,
+
+	NL80211_ATTR_PROBE_RESP_OFFLOAD,
+
+	NL80211_ATTR_PROBE_RESP,
+
+	NL80211_ATTR_DFS_REGION,
+
+	NL80211_ATTR_DISABLE_HT,
+	NL80211_ATTR_HT_CAPABILITY_MASK,
+
+	NL80211_ATTR_NOACK_MAP,
+
+	NL80211_ATTR_INACTIVITY_TIMEOUT,
+
+	NL80211_ATTR_RX_SIGNAL_DBM,
+
+	NL80211_ATTR_BG_SCAN_PERIOD,
+
+	/* add attributes here, update the policy in nl80211.c */
+
+	__NL80211_ATTR_AFTER_LAST,
+	NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
+};
+
+/* source-level API compatibility */
+#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
+#define	NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
+
+/*
+ * Allow user space programs to use #ifdef on new attributes by defining them
+ * here
+ */
+#define NL80211_CMD_CONNECT NL80211_CMD_CONNECT
+#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
+#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
+#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
+#define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ
+#define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE
+#define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE
+#define NL80211_ATTR_IE NL80211_ATTR_IE
+#define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR
+#define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE
+#define NL80211_ATTR_FRAME NL80211_ATTR_FRAME
+#define NL80211_ATTR_SSID NL80211_ATTR_SSID
+#define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE
+#define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE
+#define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE
+#define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP
+#define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS
+#define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES
+#define NL80211_ATTR_KEY NL80211_ATTR_KEY
+#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS
+#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
+
+#define NL80211_MAX_SUPP_RATES			32
+#define NL80211_MAX_SUPP_HT_RATES		77
+#define NL80211_MAX_SUPP_REG_RULES		32
+#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY	0
+#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY	16
+#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY	24
+#define NL80211_HT_CAPABILITY_LEN		26
+
+#define NL80211_MAX_NR_CIPHER_SUITES		5
+#define NL80211_MAX_NR_AKM_SUITES		2
+
+/**
+ * enum nl80211_iftype - (virtual) interface types
+ *
+ * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides
+ * @NL80211_IFTYPE_ADHOC: independent BSS member
+ * @NL80211_IFTYPE_STATION: managed BSS member
+ * @NL80211_IFTYPE_AP: access point
+ * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces
+ *	are a bit special in that they must always be tied to a pre-existing
+ *	AP type interface.
+ * @NL80211_IFTYPE_WDS: wireless distribution interface
+ * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
+ * @NL80211_IFTYPE_MESH_POINT: mesh point
+ * @NL80211_IFTYPE_P2P_CLIENT: P2P client
+ * @NL80211_IFTYPE_P2P_GO: P2P group owner
+ * @NL80211_IFTYPE_MAX: highest interface type number currently defined
+ * @NUM_NL80211_IFTYPES: number of defined interface types
+ *
+ * These values are used with the %NL80211_ATTR_IFTYPE
+ * to set the type of an interface.
+ *
+ */
+enum nl80211_iftype {
+	NL80211_IFTYPE_UNSPECIFIED,
+	NL80211_IFTYPE_ADHOC,
+	NL80211_IFTYPE_STATION,
+	NL80211_IFTYPE_AP,
+	NL80211_IFTYPE_AP_VLAN,
+	NL80211_IFTYPE_WDS,
+	NL80211_IFTYPE_MONITOR,
+	NL80211_IFTYPE_MESH_POINT,
+	NL80211_IFTYPE_P2P_CLIENT,
+	NL80211_IFTYPE_P2P_GO,
+
+	/* keep last */
+	NUM_NL80211_IFTYPES,
+	NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1
+};
+
+/**
+ * enum nl80211_sta_flags - station flags
+ *
+ * Station flags. When a station is added to an AP interface, it is
+ * assumed to be already associated (and hence authenticated.)
+ *
+ * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved
+ * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X)
+ * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
+ *	with short barker preamble
+ * @NL80211_STA_FLAG_WME: station is WME/QoS capable
+ * @NL80211_STA_FLAG_MFP: station uses management frame protection
+ * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated
+ * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer -- this flag should
+ *	only be used in managed mode (even in the flags mask). Note that the
+ *	flag can't be changed, it is only valid while adding a station, and
+ *	attempts to change it will silently be ignored (rather than rejected
+ *	as errors.)
+ * @NL80211_STA_FLAG_MAX: highest station flag number currently defined
+ * @__NL80211_STA_FLAG_AFTER_LAST: internal use
+ */
+enum nl80211_sta_flags {
+	__NL80211_STA_FLAG_INVALID,
+	NL80211_STA_FLAG_AUTHORIZED,
+	NL80211_STA_FLAG_SHORT_PREAMBLE,
+	NL80211_STA_FLAG_WME,
+	NL80211_STA_FLAG_MFP,
+	NL80211_STA_FLAG_AUTHENTICATED,
+	NL80211_STA_FLAG_TDLS_PEER,
+
+	/* keep last */
+	__NL80211_STA_FLAG_AFTER_LAST,
+	NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1
+};
+
+/**
+ * struct nl80211_sta_flag_update - station flags mask/set
+ * @mask: mask of station flags to set
+ * @set: which values to set them to
+ *
+ * Both mask and set contain bits as per &enum nl80211_sta_flags.
+ */
+struct nl80211_sta_flag_update {
+	__u32 mask;
+	__u32 set;
+} __attribute__((packed));
+
+/**
+ * enum nl80211_rate_info - bitrate information
+ *
+ * These attribute types are used with %NL80211_STA_INFO_TXRATE
+ * when getting information about the bitrate of a station.
+ *
+ * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
+ * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
+ * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate
+ * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
+ * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined
+ * @__NL80211_RATE_INFO_AFTER_LAST: internal use
+ */
+enum nl80211_rate_info {
+	__NL80211_RATE_INFO_INVALID,
+	NL80211_RATE_INFO_BITRATE,
+	NL80211_RATE_INFO_MCS,
+	NL80211_RATE_INFO_40_MHZ_WIDTH,
+	NL80211_RATE_INFO_SHORT_GI,
+
+	/* keep last */
+	__NL80211_RATE_INFO_AFTER_LAST,
+	NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_sta_bss_param - BSS information collected by STA
+ *
+ * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM
+ * when getting information about the bitrate of a station.
+ *
+ * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved
+ * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag)
+ * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE:  whether short preamble is enabled
+ *	(flag)
+ * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME:  whether short slot time is enabled
+ *	(flag)
+ * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8)
+ * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16)
+ * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined
+ * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use
+ */
+enum nl80211_sta_bss_param {
+	__NL80211_STA_BSS_PARAM_INVALID,
+	NL80211_STA_BSS_PARAM_CTS_PROT,
+	NL80211_STA_BSS_PARAM_SHORT_PREAMBLE,
+	NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME,
+	NL80211_STA_BSS_PARAM_DTIM_PERIOD,
+	NL80211_STA_BSS_PARAM_BEACON_INTERVAL,
+
+	/* keep last */
+	__NL80211_STA_BSS_PARAM_AFTER_LAST,
+	NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_sta_info - station information
+ *
+ * These attribute types are used with %NL80211_ATTR_STA_INFO
+ * when getting information about a station.
+ *
+ * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
+ * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
+ * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
+ * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
+ * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
+ * 	containing info as possible, see &enum nl80211_rate_info
+ * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
+ * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
+ *	station)
+ * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
+ * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
+ * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
+ * @NL80211_STA_INFO_LLID: the station's mesh LLID
+ * @NL80211_STA_INFO_PLID: the station's mesh PLID
+ * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station
+ *	(see %enum nl80211_plink_state)
+ * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested
+ *	attribute, like NL80211_STA_INFO_TX_BITRATE.
+ * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute
+ *     containing info as possible, see &enum nl80211_sta_bss_param
+ * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected
+ * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update.
+ * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32)
+ * @__NL80211_STA_INFO_AFTER_LAST: internal
+ * @NL80211_STA_INFO_MAX: highest possible station info attribute
+ */
+enum nl80211_sta_info {
+	__NL80211_STA_INFO_INVALID,
+	NL80211_STA_INFO_INACTIVE_TIME,
+	NL80211_STA_INFO_RX_BYTES,
+	NL80211_STA_INFO_TX_BYTES,
+	NL80211_STA_INFO_LLID,
+	NL80211_STA_INFO_PLID,
+	NL80211_STA_INFO_PLINK_STATE,
+	NL80211_STA_INFO_SIGNAL,
+	NL80211_STA_INFO_TX_BITRATE,
+	NL80211_STA_INFO_RX_PACKETS,
+	NL80211_STA_INFO_TX_PACKETS,
+	NL80211_STA_INFO_TX_RETRIES,
+	NL80211_STA_INFO_TX_FAILED,
+	NL80211_STA_INFO_SIGNAL_AVG,
+	NL80211_STA_INFO_RX_BITRATE,
+	NL80211_STA_INFO_BSS_PARAM,
+	NL80211_STA_INFO_CONNECTED_TIME,
+	NL80211_STA_INFO_STA_FLAGS,
+	NL80211_STA_INFO_BEACON_LOSS,
+
+	/* keep last */
+	__NL80211_STA_INFO_AFTER_LAST,
+	NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_mpath_flags - nl80211 mesh path flags
+ *
+ * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
+ * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running
+ * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN
+ * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set
+ * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded
+ */
+enum nl80211_mpath_flags {
+	NL80211_MPATH_FLAG_ACTIVE =	1<<0,
+	NL80211_MPATH_FLAG_RESOLVING =	1<<1,
+	NL80211_MPATH_FLAG_SN_VALID =	1<<2,
+	NL80211_MPATH_FLAG_FIXED =	1<<3,
+	NL80211_MPATH_FLAG_RESOLVED =	1<<4,
+};
+
+/**
+ * enum nl80211_mpath_info - mesh path information
+ *
+ * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting
+ * information about a mesh path.
+ *
+ * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination
+ * @NL80211_MPATH_INFO_SN: destination sequence number
+ * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path
+ * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now
+ * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in
+ * 	&enum nl80211_mpath_flags;
+ * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
+ * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries
+ * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number
+ *	currently defind
+ * @__NL80211_MPATH_INFO_AFTER_LAST: internal use
+ */
+enum nl80211_mpath_info {
+	__NL80211_MPATH_INFO_INVALID,
+	NL80211_MPATH_INFO_FRAME_QLEN,
+	NL80211_MPATH_INFO_SN,
+	NL80211_MPATH_INFO_METRIC,
+	NL80211_MPATH_INFO_EXPTIME,
+	NL80211_MPATH_INFO_FLAGS,
+	NL80211_MPATH_INFO_DISCOVERY_TIMEOUT,
+	NL80211_MPATH_INFO_DISCOVERY_RETRIES,
+
+	/* keep last */
+	__NL80211_MPATH_INFO_AFTER_LAST,
+	NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_band_attr - band attributes
+ * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band,
+ *	an array of nested frequency attributes
+ * @NL80211_BAND_ATTR_RATES: supported bitrates in this band,
+ *	an array of nested bitrate attributes
+ * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as
+ *	defined in 802.11n
+ * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
+ * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
+ * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
+ * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
+ * @__NL80211_BAND_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_band_attr {
+	__NL80211_BAND_ATTR_INVALID,
+	NL80211_BAND_ATTR_FREQS,
+	NL80211_BAND_ATTR_RATES,
+
+	NL80211_BAND_ATTR_HT_MCS_SET,
+	NL80211_BAND_ATTR_HT_CAPA,
+	NL80211_BAND_ATTR_HT_AMPDU_FACTOR,
+	NL80211_BAND_ATTR_HT_AMPDU_DENSITY,
+
+	/* keep last */
+	__NL80211_BAND_ATTR_AFTER_LAST,
+	NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
+};
+
+#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
+
+/**
+ * enum nl80211_frequency_attr - frequency attributes
+ * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
+ * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
+ *	regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is
+ *	permitted on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted
+ *	on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
+ *	on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
+ *	(100 * dBm).
+ * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
+ *	currently defined
+ * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_frequency_attr {
+	__NL80211_FREQUENCY_ATTR_INVALID,
+	NL80211_FREQUENCY_ATTR_FREQ,
+	NL80211_FREQUENCY_ATTR_DISABLED,
+	NL80211_FREQUENCY_ATTR_PASSIVE_SCAN,
+	NL80211_FREQUENCY_ATTR_NO_IBSS,
+	NL80211_FREQUENCY_ATTR_RADAR,
+	NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
+
+	/* keep last */
+	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
+	NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1
+};
+
+#define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER
+
+/**
+ * enum nl80211_bitrate_attr - bitrate attributes
+ * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps
+ * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported
+ *	in 2.4 GHz band.
+ * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number
+ *	currently defined
+ * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_bitrate_attr {
+	__NL80211_BITRATE_ATTR_INVALID,
+	NL80211_BITRATE_ATTR_RATE,
+	NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE,
+
+	/* keep last */
+	__NL80211_BITRATE_ATTR_AFTER_LAST,
+	NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_initiator - Indicates the initiator of a reg domain request
+ * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world
+ * 	regulatory domain.
+ * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the
+ * 	regulatory domain.
+ * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the
+ * 	wireless core it thinks its knows the regulatory domain we should be in.
+ * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
+ * 	802.11 country information element with regulatory information it
+ * 	thinks we should consider. cfg80211 only processes the country
+ *	code from the IE, and relies on the regulatory domain information
+ *	structure passed by userspace (CRDA) from our wireless-regdb.
+ *	If a channel is enabled but the country code indicates it should
+ *	be disabled we disable the channel and re-enable it upon disassociation.
+ */
+enum nl80211_reg_initiator {
+	NL80211_REGDOM_SET_BY_CORE,
+	NL80211_REGDOM_SET_BY_USER,
+	NL80211_REGDOM_SET_BY_DRIVER,
+	NL80211_REGDOM_SET_BY_COUNTRY_IE,
+};
+
+/**
+ * enum nl80211_reg_type - specifies the type of regulatory domain
+ * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains
+ *	to a specific country. When this is set you can count on the
+ *	ISO / IEC 3166 alpha2 country code being valid.
+ * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory
+ * 	domain.
+ * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom
+ * 	driver specific world regulatory domain. These do not apply system-wide
+ * 	and are only applicable to the individual devices which have requested
+ * 	them to be applied.
+ * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product
+ *	of an intersection between two regulatory domains -- the previously
+ *	set regulatory domain on the system and the last accepted regulatory
+ *	domain request to be processed.
+ */
+enum nl80211_reg_type {
+	NL80211_REGDOM_TYPE_COUNTRY,
+	NL80211_REGDOM_TYPE_WORLD,
+	NL80211_REGDOM_TYPE_CUSTOM_WORLD,
+	NL80211_REGDOM_TYPE_INTERSECTION,
+};
+
+/**
+ * enum nl80211_reg_rule_attr - regulatory rule attributes
+ * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
+ * 	considerations for a given frequency range. These are the
+ * 	&enum nl80211_reg_rule_flags.
+ * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory
+ * 	rule in KHz. This is not a center of frequency but an actual regulatory
+ * 	band edge.
+ * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule
+ * 	in KHz. This is not a center a frequency but an actual regulatory
+ * 	band edge.
+ * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
+ * 	frequency range, in KHz.
+ * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
+ * 	for a given frequency range. The value is in mBi (100 * dBi).
+ * 	If you don't have one then don't send this.
+ * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
+ * 	a given frequency range. The value is in mBm (100 * dBm).
+ * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
+ *	currently defined
+ * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_reg_rule_attr {
+	__NL80211_REG_RULE_ATTR_INVALID,
+	NL80211_ATTR_REG_RULE_FLAGS,
+
+	NL80211_ATTR_FREQ_RANGE_START,
+	NL80211_ATTR_FREQ_RANGE_END,
+	NL80211_ATTR_FREQ_RANGE_MAX_BW,
+
+	NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
+	NL80211_ATTR_POWER_RULE_MAX_EIRP,
+
+	/* keep last */
+	__NL80211_REG_RULE_ATTR_AFTER_LAST,
+	NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_sched_scan_match_attr - scheduled scan match attributes
+ * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
+ * only report BSS with matching SSID.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
+ *	attribute number currently defined
+ * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_sched_scan_match_attr {
+	__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID,
+
+	NL80211_ATTR_SCHED_SCAN_MATCH_SSID,
+
+	/* keep last */
+	__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
+	NL80211_SCHED_SCAN_MATCH_ATTR_MAX =
+		__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_reg_rule_flags - regulatory rule flags
+ *
+ * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed
+ * @NL80211_RRF_NO_CCK: CCK modulation not allowed
+ * @NL80211_RRF_NO_INDOOR: indoor operation not allowed
+ * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed
+ * @NL80211_RRF_DFS: DFS support is required to be used
+ * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
+ * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
+ * @NL80211_RRF_PASSIVE_SCAN: passive scan is required
+ * @NL80211_RRF_NO_IBSS: no IBSS is allowed
+ */
+enum nl80211_reg_rule_flags {
+	NL80211_RRF_NO_OFDM		= 1<<0,
+	NL80211_RRF_NO_CCK		= 1<<1,
+	NL80211_RRF_NO_INDOOR		= 1<<2,
+	NL80211_RRF_NO_OUTDOOR		= 1<<3,
+	NL80211_RRF_DFS			= 1<<4,
+	NL80211_RRF_PTP_ONLY		= 1<<5,
+	NL80211_RRF_PTMP_ONLY		= 1<<6,
+	NL80211_RRF_PASSIVE_SCAN	= 1<<7,
+	NL80211_RRF_NO_IBSS		= 1<<8,
+};
+
+/**
+ * enum nl80211_dfs_regions - regulatory DFS regions
+ *
+ * @NL80211_DFS_UNSET: Country has no DFS master region specified
+ * @NL80211_DFS_FCC_: Country follows DFS master rules from FCC
+ * @NL80211_DFS_FCC_: Country follows DFS master rules from ETSI
+ * @NL80211_DFS_JP_: Country follows DFS master rules from JP/MKK/Telec
+ */
+enum nl80211_dfs_regions {
+	NL80211_DFS_UNSET	= 0,
+	NL80211_DFS_FCC		= 1,
+	NL80211_DFS_ETSI	= 2,
+	NL80211_DFS_JP		= 3,
+};
+
+/**
+ * enum nl80211_survey_info - survey information
+ *
+ * These attribute types are used with %NL80211_ATTR_SURVEY_INFO
+ * when getting information about a survey.
+ *
+ * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
+ * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
+ * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio
+ *	spent on this channel
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary
+ *	channel was sensed busy (either due to activity or energy detect)
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension
+ *	channel was sensed busy
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent
+ *	receiving data
+ * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent
+ *	transmitting data
+ * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
+ *	currently defined
+ * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
+ */
+enum nl80211_survey_info {
+	__NL80211_SURVEY_INFO_INVALID,
+	NL80211_SURVEY_INFO_FREQUENCY,
+	NL80211_SURVEY_INFO_NOISE,
+	NL80211_SURVEY_INFO_IN_USE,
+	NL80211_SURVEY_INFO_CHANNEL_TIME,
+	NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY,
+	NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY,
+	NL80211_SURVEY_INFO_CHANNEL_TIME_RX,
+	NL80211_SURVEY_INFO_CHANNEL_TIME_TX,
+
+	/* keep last */
+	__NL80211_SURVEY_INFO_AFTER_LAST,
+	NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_mntr_flags - monitor configuration flags
+ *
+ * Monitor configuration flags.
+ *
+ * @__NL80211_MNTR_FLAG_INVALID: reserved
+ *
+ * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS
+ * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP
+ * @NL80211_MNTR_FLAG_CONTROL: pass control frames
+ * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering
+ * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing.
+ *	overrides all other flags.
+ *
+ * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use
+ * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag
+ */
+enum nl80211_mntr_flags {
+	__NL80211_MNTR_FLAG_INVALID,
+	NL80211_MNTR_FLAG_FCSFAIL,
+	NL80211_MNTR_FLAG_PLCPFAIL,
+	NL80211_MNTR_FLAG_CONTROL,
+	NL80211_MNTR_FLAG_OTHER_BSS,
+	NL80211_MNTR_FLAG_COOK_FRAMES,
+
+	/* keep last */
+	__NL80211_MNTR_FLAG_AFTER_LAST,
+	NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_meshconf_params - mesh configuration parameters
+ *
+ * Mesh configuration parameters. These can be changed while the mesh is
+ * active.
+ *
+ * @__NL80211_MESHCONF_INVALID: internal use
+ *
+ * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in
+ * millisecond units, used by the Peer Link Open message
+ *
+ * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in
+ * millisecond units, used by the peer link management to close a peer link
+ *
+ * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in
+ * millisecond units
+ *
+ * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed
+ * on this mesh interface
+ *
+ * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link
+ * open retries that can be sent to establish a new peer link instance in a
+ * mesh
+ *
+ * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh
+ * point.
+ *
+ * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically
+ * open peer links when we detect compatible mesh peers.
+ *
+ * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames
+ * containing a PREQ that an MP can send to a particular destination (path
+ * target)
+ *
+ * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths
+ * (in milliseconds)
+ *
+ * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait
+ * until giving up on a path discovery (in milliseconds)
+ *
+ * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh
+ * points receiving a PREQ shall consider the forwarding information from the
+ * root to be valid. (TU = time unit)
+ *
+ * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in
+ * TUs) during which an MP can send only one action frame containing a PREQ
+ * reference element
+ *
+ * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
+ * that it takes for an HWMP information element to propagate across the mesh
+ *
+ * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not
+ *
+ * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a
+ * source mesh point for path selection elements.
+ *
+ * @NL80211_MESHCONF_HWMP_RANN_INTERVAL:  The interval of time (in TUs) between
+ * root announcements are transmitted.
+ *
+ * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has
+ * access to a broader network beyond the MBSS.  This is done via Root
+ * Announcement frames.
+ *
+ * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in
+ * TUs) during which a mesh STA can send only one Action frame containing a
+ * PERR element.
+ *
+ * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding
+ * or forwarding entity (default is TRUE - forwarding entity)
+ *
+ * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the
+ * threshold for average signal strength of candidate station to establish
+ * a peer link.
+ *
+ * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
+ *
+ * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_meshconf_params {
+	__NL80211_MESHCONF_INVALID,
+	NL80211_MESHCONF_RETRY_TIMEOUT,
+	NL80211_MESHCONF_CONFIRM_TIMEOUT,
+	NL80211_MESHCONF_HOLDING_TIMEOUT,
+	NL80211_MESHCONF_MAX_PEER_LINKS,
+	NL80211_MESHCONF_MAX_RETRIES,
+	NL80211_MESHCONF_TTL,
+	NL80211_MESHCONF_AUTO_OPEN_PLINKS,
+	NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
+	NL80211_MESHCONF_PATH_REFRESH_TIME,
+	NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
+	NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
+	NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
+	NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
+	NL80211_MESHCONF_HWMP_ROOTMODE,
+	NL80211_MESHCONF_ELEMENT_TTL,
+	NL80211_MESHCONF_HWMP_RANN_INTERVAL,
+	NL80211_MESHCONF_GATE_ANNOUNCEMENTS,
+	NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL,
+	NL80211_MESHCONF_FORWARDING,
+	NL80211_MESHCONF_RSSI_THRESHOLD,
+
+	/* keep last */
+	__NL80211_MESHCONF_ATTR_AFTER_LAST,
+	NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_mesh_setup_params - mesh setup parameters
+ *
+ * Mesh setup parameters.  These are used to start/join a mesh and cannot be
+ * changed while the mesh is active.
+ *
+ * @__NL80211_MESH_SETUP_INVALID: Internal use
+ *
+ * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a
+ * vendor specific path selection algorithm or disable it to use the default
+ * HWMP.
+ *
+ * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a
+ * vendor specific path metric or disable it to use the default Airtime
+ * metric.
+ *
+ * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a
+ * robust security network ie, or a vendor specific information element that
+ * vendors will use to identify the path selection methods and metrics in use.
+ *
+ * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication
+ * daemon will be authenticating mesh candidates.
+ *
+ * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication
+ * daemon will be securing peer link frames.  AMPE is a secured version of Mesh
+ * Peering Management (MPM) and is implemented with the assistance of a
+ * userspace daemon.  When this flag is set, the kernel will send peer
+ * management frames to a userspace daemon that will implement AMPE
+ * functionality (security capabilities selection, key confirmation, and key
+ * management).  When the flag is unset (default), the kernel can autonomously
+ * complete (unsecured) mesh peering without the need of a userspace daemon.
+ *
+ * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
+ * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
+ */
+enum nl80211_mesh_setup_params {
+	__NL80211_MESH_SETUP_INVALID,
+	NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL,
+	NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC,
+	NL80211_MESH_SETUP_IE,
+	NL80211_MESH_SETUP_USERSPACE_AUTH,
+	NL80211_MESH_SETUP_USERSPACE_AMPE,
+
+	/* keep last */
+	__NL80211_MESH_SETUP_ATTR_AFTER_LAST,
+	NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_txq_attr - TX queue parameter attributes
+ * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
+ * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*)
+ * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning
+ *	disabled
+ * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form
+ *	2^n-1 in the range 1..32767]
+ * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form
+ *	2^n-1 in the range 1..32767]
+ * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255]
+ * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal
+ * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number
+ */
+enum nl80211_txq_attr {
+	__NL80211_TXQ_ATTR_INVALID,
+	NL80211_TXQ_ATTR_QUEUE,
+	NL80211_TXQ_ATTR_TXOP,
+	NL80211_TXQ_ATTR_CWMIN,
+	NL80211_TXQ_ATTR_CWMAX,
+	NL80211_TXQ_ATTR_AIFS,
+
+	/* keep last */
+	__NL80211_TXQ_ATTR_AFTER_LAST,
+	NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1
+};
+
+enum nl80211_txq_q {
+	NL80211_TXQ_Q_VO,
+	NL80211_TXQ_Q_VI,
+	NL80211_TXQ_Q_BE,
+	NL80211_TXQ_Q_BK
+};
+
+enum nl80211_channel_type {
+	NL80211_CHAN_NO_HT,
+	NL80211_CHAN_HT20,
+	NL80211_CHAN_HT40MINUS,
+	NL80211_CHAN_HT40PLUS
+};
+
+/**
+ * enum nl80211_bss - netlink attributes for a BSS
+ *
+ * @__NL80211_BSS_INVALID: invalid
+ * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets)
+ * @NL80211_BSS_FREQUENCY: frequency in MHz (u32)
+ * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64)
+ * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16)
+ * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16)
+ * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the
+ *	raw information elements from the probe response/beacon (bin);
+ *	if the %NL80211_BSS_BEACON_IES attribute is present, the IEs here are
+ *	from a Probe Response frame; otherwise they are from a Beacon frame.
+ *	However, if the driver does not indicate the source of the IEs, these
+ *	IEs may be from either frame subtype.
+ * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon
+ *	in mBm (100 * dBm) (s32)
+ * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
+ *	in unspecified units, scaled to 0..100 (u8)
+ * @NL80211_BSS_STATUS: status, if this BSS is "used"
+ * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms
+ * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information
+ *	elements from a Beacon frame (bin); not present if no Beacon frame has
+ *	yet been received
+ * @__NL80211_BSS_AFTER_LAST: internal
+ * @NL80211_BSS_MAX: highest BSS attribute
+ */
+enum nl80211_bss {
+	__NL80211_BSS_INVALID,
+	NL80211_BSS_BSSID,
+	NL80211_BSS_FREQUENCY,
+	NL80211_BSS_TSF,
+	NL80211_BSS_BEACON_INTERVAL,
+	NL80211_BSS_CAPABILITY,
+	NL80211_BSS_INFORMATION_ELEMENTS,
+	NL80211_BSS_SIGNAL_MBM,
+	NL80211_BSS_SIGNAL_UNSPEC,
+	NL80211_BSS_STATUS,
+	NL80211_BSS_SEEN_MS_AGO,
+	NL80211_BSS_BEACON_IES,
+
+	/* keep last */
+	__NL80211_BSS_AFTER_LAST,
+	NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_bss_status - BSS "status"
+ * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS.
+ * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS.
+ * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS.
+ *
+ * The BSS status is a BSS attribute in scan dumps, which
+ * indicates the status the interface has wrt. this BSS.
+ */
+enum nl80211_bss_status {
+	NL80211_BSS_STATUS_AUTHENTICATED,
+	NL80211_BSS_STATUS_ASSOCIATED,
+	NL80211_BSS_STATUS_IBSS_JOINED,
+};
+
+/**
+ * enum nl80211_auth_type - AuthenticationType
+ *
+ * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication
+ * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only)
+ * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
+ * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
+ * @__NL80211_AUTHTYPE_NUM: internal
+ * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
+ * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
+ *	trying multiple times); this is invalid in netlink -- leave out
+ *	the attribute for this on CONNECT commands.
+ */
+enum nl80211_auth_type {
+	NL80211_AUTHTYPE_OPEN_SYSTEM,
+	NL80211_AUTHTYPE_SHARED_KEY,
+	NL80211_AUTHTYPE_FT,
+	NL80211_AUTHTYPE_NETWORK_EAP,
+
+	/* keep last */
+	__NL80211_AUTHTYPE_NUM,
+	NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1,
+	NL80211_AUTHTYPE_AUTOMATIC
+};
+
+/**
+ * enum nl80211_key_type - Key Type
+ * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key
+ * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key
+ * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS)
+ * @NUM_NL80211_KEYTYPES: number of defined key types
+ */
+enum nl80211_key_type {
+	NL80211_KEYTYPE_GROUP,
+	NL80211_KEYTYPE_PAIRWISE,
+	NL80211_KEYTYPE_PEERKEY,
+
+	NUM_NL80211_KEYTYPES
+};
+
+/**
+ * enum nl80211_mfp - Management frame protection state
+ * @NL80211_MFP_NO: Management frame protection not used
+ * @NL80211_MFP_REQUIRED: Management frame protection required
+ */
+enum nl80211_mfp {
+	NL80211_MFP_NO,
+	NL80211_MFP_REQUIRED,
+};
+
+enum nl80211_wpa_versions {
+	NL80211_WPA_VERSION_1 = 1 << 0,
+	NL80211_WPA_VERSION_2 = 1 << 1,
+};
+
+/**
+ * enum nl80211_key_default_types - key default types
+ * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid
+ * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default
+ *	unicast key
+ * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default
+ *	multicast key
+ * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types
+ */
+enum nl80211_key_default_types {
+	__NL80211_KEY_DEFAULT_TYPE_INVALID,
+	NL80211_KEY_DEFAULT_TYPE_UNICAST,
+	NL80211_KEY_DEFAULT_TYPE_MULTICAST,
+
+	NUM_NL80211_KEY_DEFAULT_TYPES
+};
+
+/**
+ * enum nl80211_key_attributes - key attributes
+ * @__NL80211_KEY_INVALID: invalid
+ * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of
+ *	16 bytes encryption key followed by 8 bytes each for TX and RX MIC
+ *	keys
+ * @NL80211_KEY_IDX: key ID (u8, 0-3)
+ * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
+ *	section 7.3.2.25.1, e.g. 0x000FAC04)
+ * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
+ *	CCMP keys, each six bytes in little endian
+ * @NL80211_KEY_DEFAULT: flag indicating default key
+ * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key
+ * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not
+ *	specified the default depends on whether a MAC address was
+ *	given with the command using the key or not (u32)
+ * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags
+ *	attributes, specifying what a key should be set as default as.
+ *	See &enum nl80211_key_default_types.
+ * @__NL80211_KEY_AFTER_LAST: internal
+ * @NL80211_KEY_MAX: highest key attribute
+ */
+enum nl80211_key_attributes {
+	__NL80211_KEY_INVALID,
+	NL80211_KEY_DATA,
+	NL80211_KEY_IDX,
+	NL80211_KEY_CIPHER,
+	NL80211_KEY_SEQ,
+	NL80211_KEY_DEFAULT,
+	NL80211_KEY_DEFAULT_MGMT,
+	NL80211_KEY_TYPE,
+	NL80211_KEY_DEFAULT_TYPES,
+
+	/* keep last */
+	__NL80211_KEY_AFTER_LAST,
+	NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_tx_rate_attributes - TX rate set attributes
+ * @__NL80211_TXRATE_INVALID: invalid
+ * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection
+ *	in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with
+ *	1 = 500 kbps) but without the IE length restriction (at most
+ *	%NL80211_MAX_SUPP_RATES in a single array).
+ * @NL80211_TXRATE_MCS: HT (MCS) rates allowed for TX rate selection
+ *	in an array of MCS numbers.
+ * @__NL80211_TXRATE_AFTER_LAST: internal
+ * @NL80211_TXRATE_MAX: highest TX rate attribute
+ */
+enum nl80211_tx_rate_attributes {
+	__NL80211_TXRATE_INVALID,
+	NL80211_TXRATE_LEGACY,
+	NL80211_TXRATE_MCS,
+
+	/* keep last */
+	__NL80211_TXRATE_AFTER_LAST,
+	NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_band - Frequency band
+ * @NL80211_BAND_2GHZ: 2.4 GHz ISM band
+ * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
+ */
+enum nl80211_band {
+	NL80211_BAND_2GHZ,
+	NL80211_BAND_5GHZ,
+};
+
+enum nl80211_ps_state {
+	NL80211_PS_DISABLED,
+	NL80211_PS_ENABLED,
+};
+
+/**
+ * enum nl80211_attr_cqm - connection quality monitor attributes
+ * @__NL80211_ATTR_CQM_INVALID: invalid
+ * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies
+ *	the threshold for the RSSI level at which an event will be sent. Zero
+ *	to disable.
+ * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies
+ *	the minimum amount the RSSI level must change after an event before a
+ *	new event may be issued (to reduce effects of RSSI oscillation).
+ * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event
+ * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many
+ *	consecutive packets were not acknowledged by the peer
+ * @__NL80211_ATTR_CQM_AFTER_LAST: internal
+ * @NL80211_ATTR_CQM_MAX: highest key attribute
+ */
+enum nl80211_attr_cqm {
+	__NL80211_ATTR_CQM_INVALID,
+	NL80211_ATTR_CQM_RSSI_THOLD,
+	NL80211_ATTR_CQM_RSSI_HYST,
+	NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT,
+	NL80211_ATTR_CQM_PKT_LOSS_EVENT,
+
+	/* keep last */
+	__NL80211_ATTR_CQM_AFTER_LAST,
+	NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event
+ * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the
+ *      configured threshold
+ * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the
+ *      configured threshold
+ */
+enum nl80211_cqm_rssi_threshold_event {
+	NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
+	NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
+};
+
+
+/**
+ * enum nl80211_tx_power_setting - TX power adjustment
+ * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power
+ * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter
+ * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter
+ */
+enum nl80211_tx_power_setting {
+	NL80211_TX_POWER_AUTOMATIC,
+	NL80211_TX_POWER_LIMITED,
+	NL80211_TX_POWER_FIXED,
+};
+
+/**
+ * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute
+ * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute
+ * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has
+ *	a zero bit are ignored
+ * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have
+ *	a bit for each byte in the pattern. The lowest-order bit corresponds
+ *	to the first byte of the pattern, but the bytes of the pattern are
+ *	in a little-endian-like format, i.e. the 9th byte of the pattern
+ *	corresponds to the lowest-order bit in the second byte of the mask.
+ *	For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where
+ *	xx indicates "don't care") would be represented by a pattern of
+ *	twelve zero bytes, and a mask of "0xed,0x07".
+ *	Note that the pattern matching is done as though frames were not
+ *	802.11 frames but 802.3 frames, i.e. the frame is fully unpacked
+ *	first (including SNAP header unpacking) and then matched.
+ * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes
+ * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number
+ */
+enum nl80211_wowlan_packet_pattern_attr {
+	__NL80211_WOWLAN_PKTPAT_INVALID,
+	NL80211_WOWLAN_PKTPAT_MASK,
+	NL80211_WOWLAN_PKTPAT_PATTERN,
+
+	NUM_NL80211_WOWLAN_PKTPAT,
+	MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1,
+};
+
+/**
+ * struct nl80211_wowlan_pattern_support - pattern support information
+ * @max_patterns: maximum number of patterns supported
+ * @min_pattern_len: minimum length of each pattern
+ * @max_pattern_len: maximum length of each pattern
+ *
+ * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when
+ * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the
+ * capability information given by the kernel to userspace.
+ */
+struct nl80211_wowlan_pattern_support {
+	__u32 max_patterns;
+	__u32 min_pattern_len;
+	__u32 max_pattern_len;
+} __attribute__((packed));
+
+/**
+ * enum nl80211_wowlan_triggers - WoWLAN trigger definitions
+ * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes
+ * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put
+ *	the chip into a special state -- works best with chips that have
+ *	support for low-power operation already (flag)
+ * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect
+ *	is detected is implementation-specific (flag)
+ * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed
+ *	by 16 repetitions of MAC addr, anywhere in payload) (flag)
+ * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns
+ *	which are passed in an array of nested attributes, each nested attribute
+ *	defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern.
+ *	Each pattern defines a wakeup packet. The matching is done on the MSDU,
+ *	i.e. as though the packet was an 802.3 packet, so the pattern matching
+ *	is done after the packet is converted to the MSDU.
+ *
+ *	In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
+ *	carrying a &struct nl80211_wowlan_pattern_support.
+ * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be
+ *	used when setting, used only to indicate that GTK rekeying is supported
+ *	by the device (flag)
+ * @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if
+ *	done by the device) (flag)
+ * @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request
+ *	packet (flag)
+ * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag)
+ * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released
+ *	(on devices that have rfkill in the device) (flag)
+ * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
+ * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
+ */
+enum nl80211_wowlan_triggers {
+	__NL80211_WOWLAN_TRIG_INVALID,
+	NL80211_WOWLAN_TRIG_ANY,
+	NL80211_WOWLAN_TRIG_DISCONNECT,
+	NL80211_WOWLAN_TRIG_MAGIC_PKT,
+	NL80211_WOWLAN_TRIG_PKT_PATTERN,
+	NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED,
+	NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE,
+	NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST,
+	NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE,
+	NL80211_WOWLAN_TRIG_RFKILL_RELEASE,
+
+	/* keep last */
+	NUM_NL80211_WOWLAN_TRIG,
+	MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1
+};
+
+/**
+ * enum nl80211_iface_limit_attrs - limit attributes
+ * @NL80211_IFACE_LIMIT_UNSPEC: (reserved)
+ * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that
+ *	can be chosen from this set of interface types (u32)
+ * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a
+ *	flag attribute for each interface type in this set
+ * @NUM_NL80211_IFACE_LIMIT: number of attributes
+ * @MAX_NL80211_IFACE_LIMIT: highest attribute number
+ */
+enum nl80211_iface_limit_attrs {
+	NL80211_IFACE_LIMIT_UNSPEC,
+	NL80211_IFACE_LIMIT_MAX,
+	NL80211_IFACE_LIMIT_TYPES,
+
+	/* keep last */
+	NUM_NL80211_IFACE_LIMIT,
+	MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1
+};
+
+/**
+ * enum nl80211_if_combination_attrs -- interface combination attributes
+ *
+ * @NL80211_IFACE_COMB_UNSPEC: (reserved)
+ * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits
+ *	for given interface types, see &enum nl80211_iface_limit_attrs.
+ * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of
+ *	interfaces that can be created in this group. This number doesn't
+ *	apply to interfaces purely managed in software, which are listed
+ *	in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE.
+ * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that
+ *	beacon intervals within this group must be all the same even for
+ *	infrastructure and AP/GO combinations, i.e. the GO(s) must adopt
+ *	the infrastructure network's beacon interval.
+ * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many
+ *	different channels may be used within this group.
+ * @NUM_NL80211_IFACE_COMB: number of attributes
+ * @MAX_NL80211_IFACE_COMB: highest attribute number
+ *
+ * Examples:
+ *	limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2
+ *	=> allows an AP and a STA that must match BIs
+ *
+ *	numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8
+ *	=> allows 8 of AP/GO
+ *
+ *	numbers = [ #{STA} <= 2 ], channels = 2, max = 2
+ *	=> allows two STAs on different channels
+ *
+ *	numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4
+ *	=> allows a STA plus three P2P interfaces
+ *
+ * The list of these four possiblities could completely be contained
+ * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate
+ * that any of these groups must match.
+ *
+ * "Combinations" of just a single interface will not be listed here,
+ * a single interface of any valid interface type is assumed to always
+ * be possible by itself. This means that implicitly, for each valid
+ * interface type, the following group always exists:
+ *	numbers = [ #{<type>} <= 1 ], channels = 1, max = 1
+ */
+enum nl80211_if_combination_attrs {
+	NL80211_IFACE_COMB_UNSPEC,
+	NL80211_IFACE_COMB_LIMITS,
+	NL80211_IFACE_COMB_MAXNUM,
+	NL80211_IFACE_COMB_STA_AP_BI_MATCH,
+	NL80211_IFACE_COMB_NUM_CHANNELS,
+
+	/* keep last */
+	NUM_NL80211_IFACE_COMB,
+	MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1
+};
+
+
+/**
+ * enum nl80211_plink_state - state of a mesh peer link finite state machine
+ *
+ * @NL80211_PLINK_LISTEN: initial state, considered the implicit
+ *	state of non existant mesh peer links
+ * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
+ *	this mesh peer
+ * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
+ *	from this mesh peer
+ * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been
+ *	received from this mesh peer
+ * @NL80211_PLINK_ESTAB: mesh peer link is established
+ * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled
+ * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh
+ *	plink are discarded
+ * @NUM_NL80211_PLINK_STATES: number of peer link states
+ * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states
+ */
+enum nl80211_plink_state {
+	NL80211_PLINK_LISTEN,
+	NL80211_PLINK_OPN_SNT,
+	NL80211_PLINK_OPN_RCVD,
+	NL80211_PLINK_CNF_RCVD,
+	NL80211_PLINK_ESTAB,
+	NL80211_PLINK_HOLDING,
+	NL80211_PLINK_BLOCKED,
+
+	/* keep last */
+	NUM_NL80211_PLINK_STATES,
+	MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1
+};
+
+#define NL80211_KCK_LEN			16
+#define NL80211_KEK_LEN			16
+#define NL80211_REPLAY_CTR_LEN		8
+
+/**
+ * enum nl80211_rekey_data - attributes for GTK rekey offload
+ * @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes
+ * @NL80211_REKEY_DATA_KEK: key encryption key (binary)
+ * @NL80211_REKEY_DATA_KCK: key confirmation key (binary)
+ * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary)
+ * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal)
+ * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal)
+ */
+enum nl80211_rekey_data {
+	__NL80211_REKEY_DATA_INVALID,
+	NL80211_REKEY_DATA_KEK,
+	NL80211_REKEY_DATA_KCK,
+	NL80211_REKEY_DATA_REPLAY_CTR,
+
+	/* keep last */
+	NUM_NL80211_REKEY_DATA,
+	MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1
+};
+
+/**
+ * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID
+ * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in
+ *	Beacon frames)
+ * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element
+ *	in Beacon frames
+ * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID
+ *	element in Beacon frames but zero out each byte in the SSID
+ */
+enum nl80211_hidden_ssid {
+	NL80211_HIDDEN_SSID_NOT_IN_USE,
+	NL80211_HIDDEN_SSID_ZERO_LEN,
+	NL80211_HIDDEN_SSID_ZERO_CONTENTS
+};
+
+/**
+ * enum nl80211_sta_wme_attr - station WME attributes
+ * @__NL80211_STA_WME_INVALID: invalid number for nested attribute
+ * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format
+ *	is the same as the AC bitmap in the QoS info field.
+ * @NL80211_STA_WME_MAX_SP: max service period. the format is the same
+ *	as the MAX_SP field in the QoS info field (but already shifted down).
+ * @__NL80211_STA_WME_AFTER_LAST: internal
+ * @NL80211_STA_WME_MAX: highest station WME attribute
+ */
+enum nl80211_sta_wme_attr {
+	__NL80211_STA_WME_INVALID,
+	NL80211_STA_WME_UAPSD_QUEUES,
+	NL80211_STA_WME_MAX_SP,
+
+	/* keep last */
+	__NL80211_STA_WME_AFTER_LAST,
+	NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates
+ * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes
+ * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher
+ *	priority)
+ * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets)
+ * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag)
+ * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes
+ *	(internal)
+ * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute
+ *	(internal)
+ */
+enum nl80211_pmksa_candidate_attr {
+	__NL80211_PMKSA_CANDIDATE_INVALID,
+	NL80211_PMKSA_CANDIDATE_INDEX,
+	NL80211_PMKSA_CANDIDATE_BSSID,
+	NL80211_PMKSA_CANDIDATE_PREAUTH,
+
+	/* keep last */
+	NUM_NL80211_PMKSA_CANDIDATE,
+	MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1
+};
+
+/**
+ * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION
+ * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request
+ * @NL80211_TDLS_SETUP: Setup TDLS link
+ * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established
+ * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link
+ * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link
+ */
+enum nl80211_tdls_operation {
+	NL80211_TDLS_DISCOVERY_REQ,
+	NL80211_TDLS_SETUP,
+	NL80211_TDLS_TEARDOWN,
+	NL80211_TDLS_ENABLE_LINK,
+	NL80211_TDLS_DISABLE_LINK,
+};
+
+/*
+ * enum nl80211_ap_sme_features - device-integrated AP features
+ * Reserved for future use, no bits are defined in
+ * NL80211_ATTR_DEVICE_AP_SME yet.
+enum nl80211_ap_sme_features {
+};
+ */
+
+/**
+ * enum nl80211_feature_flags - device/driver features
+ * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back
+ *	TX status to the socket error queue when requested with the
+ *	socket option.
+ * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates.
+ * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up
+ *	the connected inactive stations in AP mode.
+ */
+enum nl80211_feature_flags {
+	NL80211_FEATURE_SK_TX_STATUS	= 1 << 0,
+	NL80211_FEATURE_HT_IBSS		= 1 << 1,
+	NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2,
+};
+
+/**
+ * enum nl80211_probe_resp_offload_support_attr - optional supported
+ *	protocols for probe-response offloading by the driver/FW.
+ *	To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute.
+ *	Each enum value represents a bit in the bitmap of supported
+ *	protocols. Typically a subset of probe-requests belonging to a
+ *	supported protocol will be excluded from offload and uploaded
+ *	to the host.
+ *
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u
+ */
+enum nl80211_probe_resp_offload_support_attr {
+	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS =	1<<0,
+	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 =	1<<1,
+	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P =	1<<2,
+	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U =	1<<3,
+};
+
+#endif /* __LINUX_NL80211_H */
diff --git a/include/linux/nl802154.h b/include/linux/nl802154.h
new file mode 100644
index 00000000..33d9f517
--- /dev/null
+++ b/include/linux/nl802154.h
@@ -0,0 +1,129 @@
+/*
+ * nl802154.h
+ *
+ * Copyright (C) 2007, 2008, 2009 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef NL802154_H
+#define NL802154_H
+
+#define IEEE802154_NL_NAME "802.15.4 MAC"
+#define IEEE802154_MCAST_COORD_NAME "coordinator"
+#define IEEE802154_MCAST_BEACON_NAME "beacon"
+
+enum {
+	__IEEE802154_ATTR_INVALID,
+
+	IEEE802154_ATTR_DEV_NAME,
+	IEEE802154_ATTR_DEV_INDEX,
+
+	IEEE802154_ATTR_STATUS,
+
+	IEEE802154_ATTR_SHORT_ADDR,
+	IEEE802154_ATTR_HW_ADDR,
+	IEEE802154_ATTR_PAN_ID,
+
+	IEEE802154_ATTR_CHANNEL,
+
+	IEEE802154_ATTR_COORD_SHORT_ADDR,
+	IEEE802154_ATTR_COORD_HW_ADDR,
+	IEEE802154_ATTR_COORD_PAN_ID,
+
+	IEEE802154_ATTR_SRC_SHORT_ADDR,
+	IEEE802154_ATTR_SRC_HW_ADDR,
+	IEEE802154_ATTR_SRC_PAN_ID,
+
+	IEEE802154_ATTR_DEST_SHORT_ADDR,
+	IEEE802154_ATTR_DEST_HW_ADDR,
+	IEEE802154_ATTR_DEST_PAN_ID,
+
+	IEEE802154_ATTR_CAPABILITY,
+	IEEE802154_ATTR_REASON,
+	IEEE802154_ATTR_SCAN_TYPE,
+	IEEE802154_ATTR_CHANNELS,
+	IEEE802154_ATTR_DURATION,
+	IEEE802154_ATTR_ED_LIST,
+	IEEE802154_ATTR_BCN_ORD,
+	IEEE802154_ATTR_SF_ORD,
+	IEEE802154_ATTR_PAN_COORD,
+	IEEE802154_ATTR_BAT_EXT,
+	IEEE802154_ATTR_COORD_REALIGN,
+	IEEE802154_ATTR_SEC,
+
+	IEEE802154_ATTR_PAGE,
+	IEEE802154_ATTR_CHANNEL_PAGE_LIST,
+
+	IEEE802154_ATTR_PHY_NAME,
+
+	__IEEE802154_ATTR_MAX,
+};
+
+#define IEEE802154_ATTR_MAX (__IEEE802154_ATTR_MAX - 1)
+
+extern const struct nla_policy ieee802154_policy[];
+
+/* commands */
+/* REQ should be responded with CONF
+ * and INDIC with RESP
+ */
+enum {
+	__IEEE802154_COMMAND_INVALID,
+
+	IEEE802154_ASSOCIATE_REQ,
+	IEEE802154_ASSOCIATE_CONF,
+	IEEE802154_DISASSOCIATE_REQ,
+	IEEE802154_DISASSOCIATE_CONF,
+	IEEE802154_GET_REQ,
+	IEEE802154_GET_CONF,
+	IEEE802154_RESET_REQ,
+	IEEE802154_RESET_CONF,
+	IEEE802154_SCAN_REQ,
+	IEEE802154_SCAN_CONF,
+	IEEE802154_SET_REQ,
+	IEEE802154_SET_CONF,
+	IEEE802154_START_REQ,
+	IEEE802154_START_CONF,
+	IEEE802154_SYNC_REQ,
+	IEEE802154_POLL_REQ,
+	IEEE802154_POLL_CONF,
+
+	IEEE802154_ASSOCIATE_INDIC,
+	IEEE802154_ASSOCIATE_RESP,
+	IEEE802154_DISASSOCIATE_INDIC,
+	IEEE802154_BEACON_NOTIFY_INDIC,
+	IEEE802154_ORPHAN_INDIC,
+	IEEE802154_ORPHAN_RESP,
+	IEEE802154_COMM_STATUS_INDIC,
+	IEEE802154_SYNC_LOSS_INDIC,
+
+	IEEE802154_GTS_REQ, /* Not supported yet */
+	IEEE802154_GTS_INDIC, /* Not supported yet */
+	IEEE802154_GTS_CONF, /* Not supported yet */
+	IEEE802154_RX_ENABLE_REQ, /* Not supported yet */
+	IEEE802154_RX_ENABLE_CONF, /* Not supported yet */
+
+	IEEE802154_LIST_IFACE,
+	IEEE802154_LIST_PHY,
+	IEEE802154_ADD_IFACE,
+	IEEE802154_DEL_IFACE,
+
+	__IEEE802154_CMD_MAX,
+};
+
+#define IEEE802154_CMD_MAX (__IEEE802154_CMD_MAX - 1)
+
+#endif
diff --git a/include/linux/nls.h b/include/linux/nls.h
new file mode 100644
index 00000000..5dc635f8
--- /dev/null
+++ b/include/linux/nls.h
@@ -0,0 +1,107 @@
+#ifndef _LINUX_NLS_H
+#define _LINUX_NLS_H
+
+#include <linux/init.h>
+
+/* Unicode has changed over the years.  Unicode code points no longer
+ * fit into 16 bits; as of Unicode 5 valid code points range from 0
+ * to 0x10ffff (17 planes, where each plane holds 65536 code points).
+ *
+ * The original decision to represent Unicode characters as 16-bit
+ * wchar_t values is now outdated.  But plane 0 still includes the
+ * most commonly used characters, so we will retain it.  The newer
+ * 32-bit unicode_t type can be used when it is necessary to
+ * represent the full Unicode character set.
+ */
+
+/* Plane-0 Unicode character */
+typedef u16 wchar_t;
+#define MAX_WCHAR_T	0xffff
+
+/* Arbitrary Unicode character */
+typedef u32 unicode_t;
+
+struct nls_table {
+	const char *charset;
+	const char *alias;
+	int (*uni2char) (wchar_t uni, unsigned char *out, int boundlen);
+	int (*char2uni) (const unsigned char *rawstring, int boundlen,
+			 wchar_t *uni);
+	const unsigned char *charset2lower;
+	const unsigned char *charset2upper;
+	struct module *owner;
+	struct nls_table *next;
+};
+
+/* this value hold the maximum octet of charset */
+#define NLS_MAX_CHARSET_SIZE 6 /* for UTF-8 */
+
+/* Byte order for UTF-16 strings */
+enum utf16_endian {
+	UTF16_HOST_ENDIAN,
+	UTF16_LITTLE_ENDIAN,
+	UTF16_BIG_ENDIAN
+};
+
+/* nls_base.c */
+extern int register_nls(struct nls_table *);
+extern int unregister_nls(struct nls_table *);
+extern struct nls_table *load_nls(char *);
+extern void unload_nls(struct nls_table *);
+extern struct nls_table *load_nls_default(void);
+
+extern int utf8_to_utf32(const u8 *s, int len, unicode_t *pu);
+extern int utf32_to_utf8(unicode_t u, u8 *s, int maxlen);
+extern int utf8s_to_utf16s(const u8 *s, int len,
+		enum utf16_endian endian, wchar_t *pwcs, int maxlen);
+extern int utf16s_to_utf8s(const wchar_t *pwcs, int len,
+		enum utf16_endian endian, u8 *s, int maxlen);
+
+static inline unsigned char nls_tolower(struct nls_table *t, unsigned char c)
+{
+	unsigned char nc = t->charset2lower[c];
+
+	return nc ? nc : c;
+}
+
+static inline unsigned char nls_toupper(struct nls_table *t, unsigned char c)
+{
+	unsigned char nc = t->charset2upper[c];
+
+	return nc ? nc : c;
+}
+
+static inline int nls_strnicmp(struct nls_table *t, const unsigned char *s1,
+		const unsigned char *s2, int len)
+{
+	while (len--) {
+		if (nls_tolower(t, *s1++) != nls_tolower(t, *s2++))
+			return 1;
+	}
+
+	return 0;
+}
+
+/*
+ * nls_nullsize - return length of null character for codepage
+ * @codepage - codepage for which to return length of NULL terminator
+ *
+ * Since we can't guarantee that the null terminator will be a particular
+ * length, we have to check against the codepage. If there's a problem
+ * determining it, assume a single-byte NULL terminator.
+ */
+static inline int
+nls_nullsize(const struct nls_table *codepage)
+{
+	int charlen;
+	char tmp[NLS_MAX_CHARSET_SIZE];
+
+	charlen = codepage->uni2char(0, tmp, NLS_MAX_CHARSET_SIZE);
+
+	return charlen > 0 ? charlen : 1;
+}
+
+#define MODULE_ALIAS_NLS(name)	MODULE_ALIAS("nls_" __stringify(name))
+
+#endif /* _LINUX_NLS_H */
+
diff --git a/include/linux/nmi.h b/include/linux/nmi.h
new file mode 100644
index 00000000..db50840e
--- /dev/null
+++ b/include/linux/nmi.h
@@ -0,0 +1,56 @@
+/*
+ *  linux/include/linux/nmi.h
+ */
+#ifndef LINUX_NMI_H
+#define LINUX_NMI_H
+
+#include <linux/sched.h>
+#include <asm/irq.h>
+
+/**
+ * touch_nmi_watchdog - restart NMI watchdog timeout.
+ * 
+ * If the architecture supports the NMI watchdog, touch_nmi_watchdog()
+ * may be used to reset the timeout - for code which intentionally
+ * disables interrupts for a long time. This call is stateless.
+ */
+#if defined(CONFIG_HAVE_NMI_WATCHDOG) || defined(CONFIG_HARDLOCKUP_DETECTOR)
+#include <asm/nmi.h>
+extern void touch_nmi_watchdog(void);
+#else
+static inline void touch_nmi_watchdog(void)
+{
+	touch_softlockup_watchdog();
+}
+#endif
+
+/*
+ * Create trigger_all_cpu_backtrace() out of the arch-provided
+ * base function. Return whether such support was available,
+ * to allow calling code to fall back to some other mechanism:
+ */
+#ifdef arch_trigger_all_cpu_backtrace
+static inline bool trigger_all_cpu_backtrace(void)
+{
+	arch_trigger_all_cpu_backtrace();
+
+	return true;
+}
+#else
+static inline bool trigger_all_cpu_backtrace(void)
+{
+	return false;
+}
+#endif
+
+#ifdef CONFIG_LOCKUP_DETECTOR
+int hw_nmi_is_cpu_stuck(struct pt_regs *);
+u64 hw_nmi_get_sample_period(int watchdog_thresh);
+extern int watchdog_enabled;
+extern int watchdog_thresh;
+struct ctl_table;
+extern int proc_dowatchdog(struct ctl_table *, int ,
+			   void __user *, size_t *, loff_t *);
+#endif
+
+#endif
diff --git a/include/linux/node.h b/include/linux/node.h
new file mode 100644
index 00000000..624e53ce
--- /dev/null
+++ b/include/linux/node.h
@@ -0,0 +1,85 @@
+/*
+ * include/linux/node.h - generic node definition
+ *
+ * This is mainly for topological representation. We define the 
+ * basic 'struct node' here, which can be embedded in per-arch 
+ * definitions of processors.
+ *
+ * Basic handling of the devices is done in drivers/base/node.c
+ * and system devices are handled in drivers/base/sys.c. 
+ *
+ * Nodes are exported via driverfs in the class/node/devices/
+ * directory. 
+ */
+#ifndef _LINUX_NODE_H_
+#define _LINUX_NODE_H_
+
+#include <linux/device.h>
+#include <linux/cpumask.h>
+#include <linux/workqueue.h>
+
+struct node {
+	struct device	dev;
+
+#if defined(CONFIG_MEMORY_HOTPLUG_SPARSE) && defined(CONFIG_HUGETLBFS)
+	struct work_struct	node_work;
+#endif
+};
+
+struct memory_block;
+extern struct node node_devices[];
+typedef  void (*node_registration_func_t)(struct node *);
+
+extern int register_node(struct node *, int, struct node *);
+extern void unregister_node(struct node *node);
+#ifdef CONFIG_NUMA
+extern int register_one_node(int nid);
+extern void unregister_one_node(int nid);
+extern int register_cpu_under_node(unsigned int cpu, unsigned int nid);
+extern int unregister_cpu_under_node(unsigned int cpu, unsigned int nid);
+extern int register_mem_sect_under_node(struct memory_block *mem_blk,
+						int nid);
+extern int unregister_mem_sect_under_nodes(struct memory_block *mem_blk,
+					   unsigned long phys_index);
+
+#ifdef CONFIG_HUGETLBFS
+extern void register_hugetlbfs_with_node(node_registration_func_t doregister,
+					 node_registration_func_t unregister);
+#endif
+#else
+static inline int register_one_node(int nid)
+{
+	return 0;
+}
+static inline int unregister_one_node(int nid)
+{
+	return 0;
+}
+static inline int register_cpu_under_node(unsigned int cpu, unsigned int nid)
+{
+	return 0;
+}
+static inline int unregister_cpu_under_node(unsigned int cpu, unsigned int nid)
+{
+	return 0;
+}
+static inline int register_mem_sect_under_node(struct memory_block *mem_blk,
+							int nid)
+{
+	return 0;
+}
+static inline int unregister_mem_sect_under_nodes(struct memory_block *mem_blk,
+						  unsigned long phys_index)
+{
+	return 0;
+}
+
+static inline void register_hugetlbfs_with_node(node_registration_func_t reg,
+						node_registration_func_t unreg)
+{
+}
+#endif
+
+#define to_node(device) container_of(device, struct node, dev)
+
+#endif /* _LINUX_NODE_H_ */
diff --git a/include/linux/nodemask.h b/include/linux/nodemask.h
new file mode 100644
index 00000000..7afc3633
--- /dev/null
+++ b/include/linux/nodemask.h
@@ -0,0 +1,515 @@
+#ifndef __LINUX_NODEMASK_H
+#define __LINUX_NODEMASK_H
+
+/*
+ * Nodemasks provide a bitmap suitable for representing the
+ * set of Node's in a system, one bit position per Node number.
+ *
+ * See detailed comments in the file linux/bitmap.h describing the
+ * data type on which these nodemasks are based.
+ *
+ * For details of nodemask_scnprintf() and nodemask_parse_user(),
+ * see bitmap_scnprintf() and bitmap_parse_user() in lib/bitmap.c.
+ * For details of nodelist_scnprintf() and nodelist_parse(), see
+ * bitmap_scnlistprintf() and bitmap_parselist(), also in bitmap.c.
+ * For details of node_remap(), see bitmap_bitremap in lib/bitmap.c.
+ * For details of nodes_remap(), see bitmap_remap in lib/bitmap.c.
+ * For details of nodes_onto(), see bitmap_onto in lib/bitmap.c.
+ * For details of nodes_fold(), see bitmap_fold in lib/bitmap.c.
+ *
+ * The available nodemask operations are:
+ *
+ * void node_set(node, mask)		turn on bit 'node' in mask
+ * void node_clear(node, mask)		turn off bit 'node' in mask
+ * void nodes_setall(mask)		set all bits
+ * void nodes_clear(mask)		clear all bits
+ * int node_isset(node, mask)		true iff bit 'node' set in mask
+ * int node_test_and_set(node, mask)	test and set bit 'node' in mask
+ *
+ * void nodes_and(dst, src1, src2)	dst = src1 & src2  [intersection]
+ * void nodes_or(dst, src1, src2)	dst = src1 | src2  [union]
+ * void nodes_xor(dst, src1, src2)	dst = src1 ^ src2
+ * void nodes_andnot(dst, src1, src2)	dst = src1 & ~src2
+ * void nodes_complement(dst, src)	dst = ~src
+ *
+ * int nodes_equal(mask1, mask2)	Does mask1 == mask2?
+ * int nodes_intersects(mask1, mask2)	Do mask1 and mask2 intersect?
+ * int nodes_subset(mask1, mask2)	Is mask1 a subset of mask2?
+ * int nodes_empty(mask)		Is mask empty (no bits sets)?
+ * int nodes_full(mask)			Is mask full (all bits sets)?
+ * int nodes_weight(mask)		Hamming weight - number of set bits
+ *
+ * void nodes_shift_right(dst, src, n)	Shift right
+ * void nodes_shift_left(dst, src, n)	Shift left
+ *
+ * int first_node(mask)			Number lowest set bit, or MAX_NUMNODES
+ * int next_node(node, mask)		Next node past 'node', or MAX_NUMNODES
+ * int first_unset_node(mask)		First node not set in mask, or 
+ *					MAX_NUMNODES.
+ *
+ * nodemask_t nodemask_of_node(node)	Return nodemask with bit 'node' set
+ * NODE_MASK_ALL			Initializer - all bits set
+ * NODE_MASK_NONE			Initializer - no bits set
+ * unsigned long *nodes_addr(mask)	Array of unsigned long's in mask
+ *
+ * int nodemask_scnprintf(buf, len, mask) Format nodemask for printing
+ * int nodemask_parse_user(ubuf, ulen, mask)	Parse ascii string as nodemask
+ * int nodelist_scnprintf(buf, len, mask) Format nodemask as list for printing
+ * int nodelist_parse(buf, map)		Parse ascii string as nodelist
+ * int node_remap(oldbit, old, new)	newbit = map(old, new)(oldbit)
+ * void nodes_remap(dst, src, old, new)	*dst = map(old, new)(src)
+ * void nodes_onto(dst, orig, relmap)	*dst = orig relative to relmap
+ * void nodes_fold(dst, orig, sz)	dst bits = orig bits mod sz
+ *
+ * for_each_node_mask(node, mask)	for-loop node over mask
+ *
+ * int num_online_nodes()		Number of online Nodes
+ * int num_possible_nodes()		Number of all possible Nodes
+ *
+ * int node_random(mask)		Random node with set bit in mask
+ *
+ * int node_online(node)		Is some node online?
+ * int node_possible(node)		Is some node possible?
+ *
+ * node_set_online(node)		set bit 'node' in node_online_map
+ * node_set_offline(node)		clear bit 'node' in node_online_map
+ *
+ * for_each_node(node)			for-loop node over node_possible_map
+ * for_each_online_node(node)		for-loop node over node_online_map
+ *
+ * Subtlety:
+ * 1) The 'type-checked' form of node_isset() causes gcc (3.3.2, anyway)
+ *    to generate slightly worse code.  So use a simple one-line #define
+ *    for node_isset(), instead of wrapping an inline inside a macro, the
+ *    way we do the other calls.
+ *
+ * NODEMASK_SCRATCH
+ * When doing above logical AND, OR, XOR, Remap operations the callers tend to
+ * need temporary nodemask_t's on the stack. But if NODES_SHIFT is large,
+ * nodemask_t's consume too much stack space.  NODEMASK_SCRATCH is a helper
+ * for such situations. See below and CPUMASK_ALLOC also.
+ */
+
+#include <linux/kernel.h>
+#include <linux/threads.h>
+#include <linux/bitmap.h>
+#include <linux/numa.h>
+
+typedef struct { DECLARE_BITMAP(bits, MAX_NUMNODES); } nodemask_t;
+extern nodemask_t _unused_nodemask_arg_;
+
+#define node_set(node, dst) __node_set((node), &(dst))
+static inline void __node_set(int node, volatile nodemask_t *dstp)
+{
+	set_bit(node, dstp->bits);
+}
+
+#define node_clear(node, dst) __node_clear((node), &(dst))
+static inline void __node_clear(int node, volatile nodemask_t *dstp)
+{
+	clear_bit(node, dstp->bits);
+}
+
+#define nodes_setall(dst) __nodes_setall(&(dst), MAX_NUMNODES)
+static inline void __nodes_setall(nodemask_t *dstp, int nbits)
+{
+	bitmap_fill(dstp->bits, nbits);
+}
+
+#define nodes_clear(dst) __nodes_clear(&(dst), MAX_NUMNODES)
+static inline void __nodes_clear(nodemask_t *dstp, int nbits)
+{
+	bitmap_zero(dstp->bits, nbits);
+}
+
+/* No static inline type checking - see Subtlety (1) above. */
+#define node_isset(node, nodemask) test_bit((node), (nodemask).bits)
+
+#define node_test_and_set(node, nodemask) \
+			__node_test_and_set((node), &(nodemask))
+static inline int __node_test_and_set(int node, nodemask_t *addr)
+{
+	return test_and_set_bit(node, addr->bits);
+}
+
+#define nodes_and(dst, src1, src2) \
+			__nodes_and(&(dst), &(src1), &(src2), MAX_NUMNODES)
+static inline void __nodes_and(nodemask_t *dstp, const nodemask_t *src1p,
+					const nodemask_t *src2p, int nbits)
+{
+	bitmap_and(dstp->bits, src1p->bits, src2p->bits, nbits);
+}
+
+#define nodes_or(dst, src1, src2) \
+			__nodes_or(&(dst), &(src1), &(src2), MAX_NUMNODES)
+static inline void __nodes_or(nodemask_t *dstp, const nodemask_t *src1p,
+					const nodemask_t *src2p, int nbits)
+{
+	bitmap_or(dstp->bits, src1p->bits, src2p->bits, nbits);
+}
+
+#define nodes_xor(dst, src1, src2) \
+			__nodes_xor(&(dst), &(src1), &(src2), MAX_NUMNODES)
+static inline void __nodes_xor(nodemask_t *dstp, const nodemask_t *src1p,
+					const nodemask_t *src2p, int nbits)
+{
+	bitmap_xor(dstp->bits, src1p->bits, src2p->bits, nbits);
+}
+
+#define nodes_andnot(dst, src1, src2) \
+			__nodes_andnot(&(dst), &(src1), &(src2), MAX_NUMNODES)
+static inline void __nodes_andnot(nodemask_t *dstp, const nodemask_t *src1p,
+					const nodemask_t *src2p, int nbits)
+{
+	bitmap_andnot(dstp->bits, src1p->bits, src2p->bits, nbits);
+}
+
+#define nodes_complement(dst, src) \
+			__nodes_complement(&(dst), &(src), MAX_NUMNODES)
+static inline void __nodes_complement(nodemask_t *dstp,
+					const nodemask_t *srcp, int nbits)
+{
+	bitmap_complement(dstp->bits, srcp->bits, nbits);
+}
+
+#define nodes_equal(src1, src2) \
+			__nodes_equal(&(src1), &(src2), MAX_NUMNODES)
+static inline int __nodes_equal(const nodemask_t *src1p,
+					const nodemask_t *src2p, int nbits)
+{
+	return bitmap_equal(src1p->bits, src2p->bits, nbits);
+}
+
+#define nodes_intersects(src1, src2) \
+			__nodes_intersects(&(src1), &(src2), MAX_NUMNODES)
+static inline int __nodes_intersects(const nodemask_t *src1p,
+					const nodemask_t *src2p, int nbits)
+{
+	return bitmap_intersects(src1p->bits, src2p->bits, nbits);
+}
+
+#define nodes_subset(src1, src2) \
+			__nodes_subset(&(src1), &(src2), MAX_NUMNODES)
+static inline int __nodes_subset(const nodemask_t *src1p,
+					const nodemask_t *src2p, int nbits)
+{
+	return bitmap_subset(src1p->bits, src2p->bits, nbits);
+}
+
+#define nodes_empty(src) __nodes_empty(&(src), MAX_NUMNODES)
+static inline int __nodes_empty(const nodemask_t *srcp, int nbits)
+{
+	return bitmap_empty(srcp->bits, nbits);
+}
+
+#define nodes_full(nodemask) __nodes_full(&(nodemask), MAX_NUMNODES)
+static inline int __nodes_full(const nodemask_t *srcp, int nbits)
+{
+	return bitmap_full(srcp->bits, nbits);
+}
+
+#define nodes_weight(nodemask) __nodes_weight(&(nodemask), MAX_NUMNODES)
+static inline int __nodes_weight(const nodemask_t *srcp, int nbits)
+{
+	return bitmap_weight(srcp->bits, nbits);
+}
+
+#define nodes_shift_right(dst, src, n) \
+			__nodes_shift_right(&(dst), &(src), (n), MAX_NUMNODES)
+static inline void __nodes_shift_right(nodemask_t *dstp,
+					const nodemask_t *srcp, int n, int nbits)
+{
+	bitmap_shift_right(dstp->bits, srcp->bits, n, nbits);
+}
+
+#define nodes_shift_left(dst, src, n) \
+			__nodes_shift_left(&(dst), &(src), (n), MAX_NUMNODES)
+static inline void __nodes_shift_left(nodemask_t *dstp,
+					const nodemask_t *srcp, int n, int nbits)
+{
+	bitmap_shift_left(dstp->bits, srcp->bits, n, nbits);
+}
+
+/* FIXME: better would be to fix all architectures to never return
+          > MAX_NUMNODES, then the silly min_ts could be dropped. */
+
+#define first_node(src) __first_node(&(src))
+static inline int __first_node(const nodemask_t *srcp)
+{
+	return min_t(int, MAX_NUMNODES, find_first_bit(srcp->bits, MAX_NUMNODES));
+}
+
+#define next_node(n, src) __next_node((n), &(src))
+static inline int __next_node(int n, const nodemask_t *srcp)
+{
+	return min_t(int,MAX_NUMNODES,find_next_bit(srcp->bits, MAX_NUMNODES, n+1));
+}
+
+static inline void init_nodemask_of_node(nodemask_t *mask, int node)
+{
+	nodes_clear(*mask);
+	node_set(node, *mask);
+}
+
+#define nodemask_of_node(node)						\
+({									\
+	typeof(_unused_nodemask_arg_) m;				\
+	if (sizeof(m) == sizeof(unsigned long)) {			\
+		m.bits[0] = 1UL << (node);				\
+	} else {							\
+		init_nodemask_of_node(&m, (node));			\
+	}								\
+	m;								\
+})
+
+#define first_unset_node(mask) __first_unset_node(&(mask))
+static inline int __first_unset_node(const nodemask_t *maskp)
+{
+	return min_t(int,MAX_NUMNODES,
+			find_first_zero_bit(maskp->bits, MAX_NUMNODES));
+}
+
+#define NODE_MASK_LAST_WORD BITMAP_LAST_WORD_MASK(MAX_NUMNODES)
+
+#if MAX_NUMNODES <= BITS_PER_LONG
+
+#define NODE_MASK_ALL							\
+((nodemask_t) { {							\
+	[BITS_TO_LONGS(MAX_NUMNODES)-1] = NODE_MASK_LAST_WORD		\
+} })
+
+#else
+
+#define NODE_MASK_ALL							\
+((nodemask_t) { {							\
+	[0 ... BITS_TO_LONGS(MAX_NUMNODES)-2] = ~0UL,			\
+	[BITS_TO_LONGS(MAX_NUMNODES)-1] = NODE_MASK_LAST_WORD		\
+} })
+
+#endif
+
+#define NODE_MASK_NONE							\
+((nodemask_t) { {							\
+	[0 ... BITS_TO_LONGS(MAX_NUMNODES)-1] =  0UL			\
+} })
+
+#define nodes_addr(src) ((src).bits)
+
+#define nodemask_scnprintf(buf, len, src) \
+			__nodemask_scnprintf((buf), (len), &(src), MAX_NUMNODES)
+static inline int __nodemask_scnprintf(char *buf, int len,
+					const nodemask_t *srcp, int nbits)
+{
+	return bitmap_scnprintf(buf, len, srcp->bits, nbits);
+}
+
+#define nodemask_parse_user(ubuf, ulen, dst) \
+		__nodemask_parse_user((ubuf), (ulen), &(dst), MAX_NUMNODES)
+static inline int __nodemask_parse_user(const char __user *buf, int len,
+					nodemask_t *dstp, int nbits)
+{
+	return bitmap_parse_user(buf, len, dstp->bits, nbits);
+}
+
+#define nodelist_scnprintf(buf, len, src) \
+			__nodelist_scnprintf((buf), (len), &(src), MAX_NUMNODES)
+static inline int __nodelist_scnprintf(char *buf, int len,
+					const nodemask_t *srcp, int nbits)
+{
+	return bitmap_scnlistprintf(buf, len, srcp->bits, nbits);
+}
+
+#define nodelist_parse(buf, dst) __nodelist_parse((buf), &(dst), MAX_NUMNODES)
+static inline int __nodelist_parse(const char *buf, nodemask_t *dstp, int nbits)
+{
+	return bitmap_parselist(buf, dstp->bits, nbits);
+}
+
+#define node_remap(oldbit, old, new) \
+		__node_remap((oldbit), &(old), &(new), MAX_NUMNODES)
+static inline int __node_remap(int oldbit,
+		const nodemask_t *oldp, const nodemask_t *newp, int nbits)
+{
+	return bitmap_bitremap(oldbit, oldp->bits, newp->bits, nbits);
+}
+
+#define nodes_remap(dst, src, old, new) \
+		__nodes_remap(&(dst), &(src), &(old), &(new), MAX_NUMNODES)
+static inline void __nodes_remap(nodemask_t *dstp, const nodemask_t *srcp,
+		const nodemask_t *oldp, const nodemask_t *newp, int nbits)
+{
+	bitmap_remap(dstp->bits, srcp->bits, oldp->bits, newp->bits, nbits);
+}
+
+#define nodes_onto(dst, orig, relmap) \
+		__nodes_onto(&(dst), &(orig), &(relmap), MAX_NUMNODES)
+static inline void __nodes_onto(nodemask_t *dstp, const nodemask_t *origp,
+		const nodemask_t *relmapp, int nbits)
+{
+	bitmap_onto(dstp->bits, origp->bits, relmapp->bits, nbits);
+}
+
+#define nodes_fold(dst, orig, sz) \
+		__nodes_fold(&(dst), &(orig), sz, MAX_NUMNODES)
+static inline void __nodes_fold(nodemask_t *dstp, const nodemask_t *origp,
+		int sz, int nbits)
+{
+	bitmap_fold(dstp->bits, origp->bits, sz, nbits);
+}
+
+#if MAX_NUMNODES > 1
+#define for_each_node_mask(node, mask)			\
+	for ((node) = first_node(mask);			\
+		(node) < MAX_NUMNODES;			\
+		(node) = next_node((node), (mask)))
+#else /* MAX_NUMNODES == 1 */
+#define for_each_node_mask(node, mask)			\
+	if (!nodes_empty(mask))				\
+		for ((node) = 0; (node) < 1; (node)++)
+#endif /* MAX_NUMNODES */
+
+/*
+ * Bitmasks that are kept for all the nodes.
+ */
+enum node_states {
+	N_POSSIBLE,		/* The node could become online at some point */
+	N_ONLINE,		/* The node is online */
+	N_NORMAL_MEMORY,	/* The node has regular memory */
+#ifdef CONFIG_HIGHMEM
+	N_HIGH_MEMORY,		/* The node has regular or high memory */
+#else
+	N_HIGH_MEMORY = N_NORMAL_MEMORY,
+#endif
+	N_CPU,		/* The node has one or more cpus */
+	NR_NODE_STATES
+};
+
+/*
+ * The following particular system nodemasks and operations
+ * on them manage all possible and online nodes.
+ */
+
+extern nodemask_t node_states[NR_NODE_STATES];
+
+#if MAX_NUMNODES > 1
+static inline int node_state(int node, enum node_states state)
+{
+	return node_isset(node, node_states[state]);
+}
+
+static inline void node_set_state(int node, enum node_states state)
+{
+	__node_set(node, &node_states[state]);
+}
+
+static inline void node_clear_state(int node, enum node_states state)
+{
+	__node_clear(node, &node_states[state]);
+}
+
+static inline int num_node_state(enum node_states state)
+{
+	return nodes_weight(node_states[state]);
+}
+
+#define for_each_node_state(__node, __state) \
+	for_each_node_mask((__node), node_states[__state])
+
+#define first_online_node	first_node(node_states[N_ONLINE])
+#define next_online_node(nid)	next_node((nid), node_states[N_ONLINE])
+
+extern int nr_node_ids;
+extern int nr_online_nodes;
+
+static inline void node_set_online(int nid)
+{
+	node_set_state(nid, N_ONLINE);
+	nr_online_nodes = num_node_state(N_ONLINE);
+}
+
+static inline void node_set_offline(int nid)
+{
+	node_clear_state(nid, N_ONLINE);
+	nr_online_nodes = num_node_state(N_ONLINE);
+}
+
+#else
+
+static inline int node_state(int node, enum node_states state)
+{
+	return node == 0;
+}
+
+static inline void node_set_state(int node, enum node_states state)
+{
+}
+
+static inline void node_clear_state(int node, enum node_states state)
+{
+}
+
+static inline int num_node_state(enum node_states state)
+{
+	return 1;
+}
+
+#define for_each_node_state(node, __state) \
+	for ( (node) = 0; (node) == 0; (node) = 1)
+
+#define first_online_node	0
+#define next_online_node(nid)	(MAX_NUMNODES)
+#define nr_node_ids		1
+#define nr_online_nodes		1
+
+#define node_set_online(node)	   node_set_state((node), N_ONLINE)
+#define node_set_offline(node)	   node_clear_state((node), N_ONLINE)
+
+#endif
+
+#if defined(CONFIG_NUMA) && (MAX_NUMNODES > 1)
+extern int node_random(const nodemask_t *maskp);
+#else
+static inline int node_random(const nodemask_t *mask)
+{
+	return 0;
+}
+#endif
+
+#define node_online_map 	node_states[N_ONLINE]
+#define node_possible_map 	node_states[N_POSSIBLE]
+
+#define num_online_nodes()	num_node_state(N_ONLINE)
+#define num_possible_nodes()	num_node_state(N_POSSIBLE)
+#define node_online(node)	node_state((node), N_ONLINE)
+#define node_possible(node)	node_state((node), N_POSSIBLE)
+
+#define for_each_node(node)	   for_each_node_state(node, N_POSSIBLE)
+#define for_each_online_node(node) for_each_node_state(node, N_ONLINE)
+
+/*
+ * For nodemask scrach area.
+ * NODEMASK_ALLOC(type, name) allocates an object with a specified type and
+ * name.
+ */
+#if NODES_SHIFT > 8 /* nodemask_t > 256 bytes */
+#define NODEMASK_ALLOC(type, name, gfp_flags)	\
+			type *name = kmalloc(sizeof(*name), gfp_flags)
+#define NODEMASK_FREE(m)			kfree(m)
+#else
+#define NODEMASK_ALLOC(type, name, gfp_flags)	type _##name, *name = &_##name
+#define NODEMASK_FREE(m)			do {} while (0)
+#endif
+
+/* A example struture for using NODEMASK_ALLOC, used in mempolicy. */
+struct nodemask_scratch {
+	nodemask_t	mask1;
+	nodemask_t	mask2;
+};
+
+#define NODEMASK_SCRATCH(x)						\
+			NODEMASK_ALLOC(struct nodemask_scratch, x,	\
+					GFP_KERNEL | __GFP_NORETRY)
+#define NODEMASK_SCRATCH_FREE(x)	NODEMASK_FREE(x)
+
+
+#endif /* __LINUX_NODEMASK_H */
diff --git a/include/linux/notifier.h b/include/linux/notifier.h
new file mode 100644
index 00000000..d65746ef
--- /dev/null
+++ b/include/linux/notifier.h
@@ -0,0 +1,212 @@
+/*
+ *	Routines to manage notifier chains for passing status changes to any
+ *	interested routines. We need this instead of hard coded call lists so
+ *	that modules can poke their nose into the innards. The network devices
+ *	needed them so here they are for the rest of you.
+ *
+ *				Alan Cox <Alan.Cox@linux.org>
+ */
+ 
+#ifndef _LINUX_NOTIFIER_H
+#define _LINUX_NOTIFIER_H
+#include <linux/errno.h>
+#include <linux/mutex.h>
+#include <linux/rwsem.h>
+#include <linux/srcu.h>
+
+/*
+ * Notifier chains are of four types:
+ *
+ *	Atomic notifier chains: Chain callbacks run in interrupt/atomic
+ *		context. Callouts are not allowed to block.
+ *	Blocking notifier chains: Chain callbacks run in process context.
+ *		Callouts are allowed to block.
+ *	Raw notifier chains: There are no restrictions on callbacks,
+ *		registration, or unregistration.  All locking and protection
+ *		must be provided by the caller.
+ *	SRCU notifier chains: A variant of blocking notifier chains, with
+ *		the same restrictions.
+ *
+ * atomic_notifier_chain_register() may be called from an atomic context,
+ * but blocking_notifier_chain_register() and srcu_notifier_chain_register()
+ * must be called from a process context.  Ditto for the corresponding
+ * _unregister() routines.
+ *
+ * atomic_notifier_chain_unregister(), blocking_notifier_chain_unregister(),
+ * and srcu_notifier_chain_unregister() _must not_ be called from within
+ * the call chain.
+ *
+ * SRCU notifier chains are an alternative form of blocking notifier chains.
+ * They use SRCU (Sleepable Read-Copy Update) instead of rw-semaphores for
+ * protection of the chain links.  This means there is _very_ low overhead
+ * in srcu_notifier_call_chain(): no cache bounces and no memory barriers.
+ * As compensation, srcu_notifier_chain_unregister() is rather expensive.
+ * SRCU notifier chains should be used when the chain will be called very
+ * often but notifier_blocks will seldom be removed.  Also, SRCU notifier
+ * chains are slightly more difficult to use because they require special
+ * runtime initialization.
+ */
+
+struct notifier_block {
+	int (*notifier_call)(struct notifier_block *, unsigned long, void *);
+	struct notifier_block __rcu *next;
+	int priority;
+};
+
+struct atomic_notifier_head {
+	spinlock_t lock;
+	struct notifier_block __rcu *head;
+};
+
+struct blocking_notifier_head {
+	struct rw_semaphore rwsem;
+	struct notifier_block __rcu *head;
+};
+
+struct raw_notifier_head {
+	struct notifier_block __rcu *head;
+};
+
+struct srcu_notifier_head {
+	struct mutex mutex;
+	struct srcu_struct srcu;
+	struct notifier_block __rcu *head;
+};
+
+#define ATOMIC_INIT_NOTIFIER_HEAD(name) do {	\
+		spin_lock_init(&(name)->lock);	\
+		(name)->head = NULL;		\
+	} while (0)
+#define BLOCKING_INIT_NOTIFIER_HEAD(name) do {	\
+		init_rwsem(&(name)->rwsem);	\
+		(name)->head = NULL;		\
+	} while (0)
+#define RAW_INIT_NOTIFIER_HEAD(name) do {	\
+		(name)->head = NULL;		\
+	} while (0)
+
+/* srcu_notifier_heads must be initialized and cleaned up dynamically */
+extern void srcu_init_notifier_head(struct srcu_notifier_head *nh);
+#define srcu_cleanup_notifier_head(name)	\
+		cleanup_srcu_struct(&(name)->srcu);
+
+#define ATOMIC_NOTIFIER_INIT(name) {				\
+		.lock = __SPIN_LOCK_UNLOCKED(name.lock),	\
+		.head = NULL }
+#define BLOCKING_NOTIFIER_INIT(name) {				\
+		.rwsem = __RWSEM_INITIALIZER((name).rwsem),	\
+		.head = NULL }
+#define RAW_NOTIFIER_INIT(name)	{				\
+		.head = NULL }
+/* srcu_notifier_heads cannot be initialized statically */
+
+#define ATOMIC_NOTIFIER_HEAD(name)				\
+	struct atomic_notifier_head name =			\
+		ATOMIC_NOTIFIER_INIT(name)
+#define BLOCKING_NOTIFIER_HEAD(name)				\
+	struct blocking_notifier_head name =			\
+		BLOCKING_NOTIFIER_INIT(name)
+#define RAW_NOTIFIER_HEAD(name)					\
+	struct raw_notifier_head name =				\
+		RAW_NOTIFIER_INIT(name)
+
+#ifdef __KERNEL__
+
+extern int atomic_notifier_chain_register(struct atomic_notifier_head *nh,
+		struct notifier_block *nb);
+extern int blocking_notifier_chain_register(struct blocking_notifier_head *nh,
+		struct notifier_block *nb);
+extern int raw_notifier_chain_register(struct raw_notifier_head *nh,
+		struct notifier_block *nb);
+extern int srcu_notifier_chain_register(struct srcu_notifier_head *nh,
+		struct notifier_block *nb);
+
+extern int blocking_notifier_chain_cond_register(
+		struct blocking_notifier_head *nh,
+		struct notifier_block *nb);
+
+extern int atomic_notifier_chain_unregister(struct atomic_notifier_head *nh,
+		struct notifier_block *nb);
+extern int blocking_notifier_chain_unregister(struct blocking_notifier_head *nh,
+		struct notifier_block *nb);
+extern int raw_notifier_chain_unregister(struct raw_notifier_head *nh,
+		struct notifier_block *nb);
+extern int srcu_notifier_chain_unregister(struct srcu_notifier_head *nh,
+		struct notifier_block *nb);
+
+extern int atomic_notifier_call_chain(struct atomic_notifier_head *nh,
+		unsigned long val, void *v);
+extern int __atomic_notifier_call_chain(struct atomic_notifier_head *nh,
+	unsigned long val, void *v, int nr_to_call, int *nr_calls);
+extern int blocking_notifier_call_chain(struct blocking_notifier_head *nh,
+		unsigned long val, void *v);
+extern int __blocking_notifier_call_chain(struct blocking_notifier_head *nh,
+	unsigned long val, void *v, int nr_to_call, int *nr_calls);
+extern int raw_notifier_call_chain(struct raw_notifier_head *nh,
+		unsigned long val, void *v);
+extern int __raw_notifier_call_chain(struct raw_notifier_head *nh,
+	unsigned long val, void *v, int nr_to_call, int *nr_calls);
+extern int srcu_notifier_call_chain(struct srcu_notifier_head *nh,
+		unsigned long val, void *v);
+extern int __srcu_notifier_call_chain(struct srcu_notifier_head *nh,
+	unsigned long val, void *v, int nr_to_call, int *nr_calls);
+
+#define NOTIFY_DONE		0x0000		/* Don't care */
+#define NOTIFY_OK		0x0001		/* Suits me */
+#define NOTIFY_STOP_MASK	0x8000		/* Don't call further */
+#define NOTIFY_BAD		(NOTIFY_STOP_MASK|0x0002)
+						/* Bad/Veto action */
+/*
+ * Clean way to return from the notifier and stop further calls.
+ */
+#define NOTIFY_STOP		(NOTIFY_OK|NOTIFY_STOP_MASK)
+
+/* Encapsulate (negative) errno value (in particular, NOTIFY_BAD <=> EPERM). */
+static inline int notifier_from_errno(int err)
+{
+	if (err)
+		return NOTIFY_STOP_MASK | (NOTIFY_OK - err);
+
+	return NOTIFY_OK;
+}
+
+/* Restore (negative) errno value from notify return value. */
+static inline int notifier_to_errno(int ret)
+{
+	ret &= ~NOTIFY_STOP_MASK;
+	return ret > NOTIFY_OK ? NOTIFY_OK - ret : 0;
+}
+
+/*
+ *	Declared notifiers so far. I can imagine quite a few more chains
+ *	over time (eg laptop power reset chains, reboot chain (to clean 
+ *	device units up), device [un]mount chain, module load/unload chain,
+ *	low memory chain, screenblank chain (for plug in modular screenblankers) 
+ *	VC switch chains (for loadable kernel svgalib VC switch helpers) etc...
+ */
+ 
+/* CPU notfiers are defined in include/linux/cpu.h. */
+
+/* netdevice notifiers are defined in include/linux/netdevice.h */
+
+/* reboot notifiers are defined in include/linux/reboot.h. */
+
+/* Hibernation and suspend events are defined in include/linux/suspend.h. */
+
+/* Virtual Terminal events are defined in include/linux/vt.h. */
+
+#define NETLINK_URELEASE	0x0001	/* Unicast netlink socket released */
+
+/* Console keyboard events.
+ * Note: KBD_KEYCODE is always sent before KBD_UNBOUND_KEYCODE, KBD_UNICODE and
+ * KBD_KEYSYM. */
+#define KBD_KEYCODE		0x0001 /* Keyboard keycode, called before any other */
+#define KBD_UNBOUND_KEYCODE	0x0002 /* Keyboard keycode which is not bound to any other */
+#define KBD_UNICODE		0x0003 /* Keyboard unicode */
+#define KBD_KEYSYM		0x0004 /* Keyboard keysym */
+#define KBD_POST_KEYSYM		0x0005 /* Called after keyboard keysym interpretation */
+
+extern struct blocking_notifier_head reboot_notifier_list;
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_NOTIFIER_H */
diff --git a/include/linux/nsc_gpio.h b/include/linux/nsc_gpio.h
new file mode 100644
index 00000000..7da0cf37
--- /dev/null
+++ b/include/linux/nsc_gpio.h
@@ -0,0 +1,40 @@
+/**
+   nsc_gpio.c
+
+   National Semiconductor GPIO common access methods.
+
+   struct nsc_gpio_ops abstracts the low-level access
+   operations for the GPIO units on 2 NSC chip families; the GEODE
+   integrated CPU, and the PC-8736[03456] integrated PC-peripheral
+   chips.
+
+   The GPIO units on these chips have the same pin architecture, but
+   the access methods differ.  Thus, scx200_gpio and pc8736x_gpio
+   implement their own versions of these routines; and use the common
+   file-operations routines implemented in nsc_gpio module.
+
+   Copyright (c) 2005 Jim Cromie <jim.cromie@gmail.com>
+
+   NB: this work was tested on the Geode SC-1100 and PC-87366 chips.
+   NSC sold the GEODE line to AMD, and the PC-8736x line to Winbond.
+*/
+
+struct nsc_gpio_ops {
+	struct module*	owner;
+	u32	(*gpio_config)	(unsigned iminor, u32 mask, u32 bits);
+	void	(*gpio_dump)	(struct nsc_gpio_ops *amp, unsigned iminor);
+	int	(*gpio_get)	(unsigned iminor);
+	void	(*gpio_set)	(unsigned iminor, int state);
+	void	(*gpio_change)	(unsigned iminor);
+	int	(*gpio_current)	(unsigned iminor);
+	struct device*	dev;	/* for dev_dbg() support, set in init  */
+};
+
+extern ssize_t nsc_gpio_write(struct file *file, const char __user *data,
+			      size_t len, loff_t *ppos);
+
+extern ssize_t nsc_gpio_read(struct file *file, char __user *buf,
+			     size_t len, loff_t *ppos);
+
+extern void nsc_gpio_dump(struct nsc_gpio_ops *amp, unsigned index);
+
diff --git a/include/linux/nsproxy.h b/include/linux/nsproxy.h
new file mode 100644
index 00000000..cc37a55a
--- /dev/null
+++ b/include/linux/nsproxy.h
@@ -0,0 +1,85 @@
+#ifndef _LINUX_NSPROXY_H
+#define _LINUX_NSPROXY_H
+
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+
+struct mnt_namespace;
+struct uts_namespace;
+struct ipc_namespace;
+struct pid_namespace;
+struct fs_struct;
+
+/*
+ * A structure to contain pointers to all per-process
+ * namespaces - fs (mount), uts, network, sysvipc, etc.
+ *
+ * 'count' is the number of tasks holding a reference.
+ * The count for each namespace, then, will be the number
+ * of nsproxies pointing to it, not the number of tasks.
+ *
+ * The nsproxy is shared by tasks which share all namespaces.
+ * As soon as a single namespace is cloned or unshared, the
+ * nsproxy is copied.
+ */
+struct nsproxy {
+	atomic_t count;
+	struct uts_namespace *uts_ns;
+	struct ipc_namespace *ipc_ns;
+	struct mnt_namespace *mnt_ns;
+	struct pid_namespace *pid_ns;
+	struct net 	     *net_ns;
+};
+extern struct nsproxy init_nsproxy;
+
+/*
+ * the namespaces access rules are:
+ *
+ *  1. only current task is allowed to change tsk->nsproxy pointer or
+ *     any pointer on the nsproxy itself
+ *
+ *  2. when accessing (i.e. reading) current task's namespaces - no
+ *     precautions should be taken - just dereference the pointers
+ *
+ *  3. the access to other task namespaces is performed like this
+ *     rcu_read_lock();
+ *     nsproxy = task_nsproxy(tsk);
+ *     if (nsproxy != NULL) {
+ *             / *
+ *               * work with the namespaces here
+ *               * e.g. get the reference on one of them
+ *               * /
+ *     } / *
+ *         * NULL task_nsproxy() means that this task is
+ *         * almost dead (zombie)
+ *         * /
+ *     rcu_read_unlock();
+ *
+ */
+
+static inline struct nsproxy *task_nsproxy(struct task_struct *tsk)
+{
+	return rcu_dereference(tsk->nsproxy);
+}
+
+int copy_namespaces(unsigned long flags, struct task_struct *tsk);
+void exit_task_namespaces(struct task_struct *tsk);
+void switch_task_namespaces(struct task_struct *tsk, struct nsproxy *new);
+void free_nsproxy(struct nsproxy *ns);
+int unshare_nsproxy_namespaces(unsigned long, struct nsproxy **,
+	struct fs_struct *);
+int __init nsproxy_cache_init(void);
+
+static inline void put_nsproxy(struct nsproxy *ns)
+{
+	if (atomic_dec_and_test(&ns->count)) {
+		free_nsproxy(ns);
+	}
+}
+
+static inline void get_nsproxy(struct nsproxy *ns)
+{
+	atomic_inc(&ns->count);
+}
+
+#endif
diff --git a/include/linux/nubus.h b/include/linux/nubus.h
new file mode 100644
index 00000000..e137b3c4
--- /dev/null
+++ b/include/linux/nubus.h
@@ -0,0 +1,363 @@
+/*
+  nubus.h: various definitions and prototypes for NuBus drivers to use.
+
+  Originally written by Alan Cox.
+
+  Hacked to death by C. Scott Ananian and David Huggins-Daines.
+  
+  Some of the constants in here are from the corresponding
+  NetBSD/OpenBSD header file, by Allen Briggs.  We figured out the
+  rest of them on our own. */
+
+#ifndef LINUX_NUBUS_H
+#define LINUX_NUBUS_H
+
+#include <linux/types.h>
+#ifdef __KERNEL__
+#include <asm/nubus.h>
+#endif
+
+enum nubus_category {
+	NUBUS_CAT_BOARD          = 0x0001,
+	NUBUS_CAT_DISPLAY        = 0x0003,
+	NUBUS_CAT_NETWORK        = 0x0004,
+	NUBUS_CAT_COMMUNICATIONS = 0x0006,
+	NUBUS_CAT_FONT           = 0x0009,
+	NUBUS_CAT_CPU            = 0x000A,
+	/* For lack of a better name */
+	NUBUS_CAT_DUODOCK        = 0x0020
+};
+
+enum nubus_type_network {
+	NUBUS_TYPE_ETHERNET      = 0x0001,
+	NUBUS_TYPE_RS232         = 0x0002
+};
+
+enum nubus_type_display {
+	NUBUS_TYPE_VIDEO         = 0x0001
+};
+
+enum nubus_type_cpu {
+	NUBUS_TYPE_68020         = 0x0003,
+	NUBUS_TYPE_68030         = 0x0004,
+	NUBUS_TYPE_68040         = 0x0005
+};
+
+/* Known <Cat,Type,SW,HW> tuples: (according to TattleTech and Slots)
+ *  68030 motherboards: <10,4,0,24>
+ *  68040 motherboards: <10,5,0,24>
+ *  DuoDock Plus: <32,1,1,2>
+ *
+ *  Toby Frame Buffer card: <3,1,1,1>
+ *  RBV built-in video (IIci): <3,1,1,24>
+ *  Valkyrie built-in video (Q630): <3,1,1,46>
+ *  Macintosh Display Card: <3,1,1,25>
+ *  Sonora built-in video (P460): <3,1,1,34>
+ *  Jet framebuffer (DuoDock Plus): <3,1,1,41>
+ *
+ *  SONIC comm-slot/on-board and DuoDock Ethernet: <4,1,1,272>
+ *  SONIC LC-PDS Ethernet (Dayna, but like Apple 16-bit, sort of): <4,1,1,271>
+ *  Apple SONIC LC-PDS Ethernet ("Apple Ethernet LC Twisted-Pair Card"): <4,1,0,281>
+ *  Sonic Systems Ethernet A-Series Card: <4,1,268,256>
+ *  Asante MacCon NuBus-A: <4,1,260,256> (alpha-1.0,1.1 revision)
+ *   ROM on the above card: <2,1,0,0>
+ *  Cabletron ethernet card: <4,1,1,265>
+ *  Farallon ethernet card: <4,1,268,256> (identical to Sonic Systems card)
+ *  Kinetics EtherPort IIN: <4,1,259,262>
+ *  API Engineering EtherRun_LCa PDS enet card: <4,1,282,256>
+ *
+ *  Add your devices to the list!  You can obtain the "Slots" utility
+ *  from Apple's FTP site at:
+ *  ftp://dev.apple.com/devworld/Tool_Chest/Devices_-_Hardware/NuBus_Slot_Manager/
+ *
+ *  Alternately, TattleTech can be found at any Info-Mac mirror site.  
+ *  or from its distribution site: ftp://ftp.decismkr.com/dms
+ */
+
+/* DrSW: Uniquely identifies the software interface to a board.  This
+   is usually the one you want to look at when writing a driver.  It's
+   not as useful as you think, though, because as we should know by
+   now (duh), "Apple Compatible" can mean a lot of things... */
+
+/* Add known DrSW values here */
+enum nubus_drsw {
+	/* NUBUS_CAT_DISPLAY */
+	NUBUS_DRSW_APPLE        = 0x0001,
+	NUBUS_DRSW_APPLE_HIRES  = 0x0013, /* MacII HiRes card driver */
+	
+	/* NUBUS_CAT_NETWORK */
+	NUBUS_DRSW_3COM         = 0x0000,
+	NUBUS_DRSW_CABLETRON    = 0x0001,
+	NUBUS_DRSW_SONIC_LC     = 0x0001,
+	NUBUS_DRSW_KINETICS     = 0x0103,
+	NUBUS_DRSW_ASANTE       = 0x0104,
+	NUBUS_DRSW_TECHWORKS    = 0x0109,
+	NUBUS_DRSW_DAYNA        = 0x010b,
+	NUBUS_DRSW_FARALLON     = 0x010c,
+	NUBUS_DRSW_APPLE_SN     = 0x010f,
+	NUBUS_DRSW_DAYNA2       = 0x0115,
+	NUBUS_DRSW_FOCUS        = 0x011a,
+	NUBUS_DRSW_ASANTE_CS    = 0x011d, /* use asante SMC9194 driver */
+	NUBUS_DRSW_DAYNA_LC     = 0x011e,
+
+	/* NUBUS_CAT_CPU */
+	NUBUS_DRSW_NONE         = 0x0000,
+};
+
+/* DrHW: Uniquely identifies the hardware interface to a board (or at
+   least, it should...  some video cards are known to incorrectly
+   identify themselves as Toby cards) */
+
+/* Add known DrHW values here */
+enum nubus_drhw {
+	/* NUBUS_CAT_DISPLAY */
+	NUBUS_DRHW_APPLE_TFB      = 0x0001, /* Toby frame buffer card */
+	NUBUS_DRHW_APPLE_WVC      = 0x0006, /* Apple Workstation Video Card */
+	NUBUS_DRHW_SIGMA_CLRMAX   = 0x0007, /* Sigma Design ColorMax */
+	NUBUS_DRHW_APPLE_SE30     = 0x0009, /* Apple SE/30 video */
+	NUBUS_DRHW_APPLE_HRVC     = 0x0013, /* Mac II High-Res Video Card */
+	NUBUS_DRHW_APPLE_PVC      = 0x0017, /* Mac II Portrait Video Card */
+	NUBUS_DRHW_APPLE_RBV1     = 0x0018, /* IIci RBV video */
+	NUBUS_DRHW_APPLE_MDC      = 0x0019, /* Macintosh Display Card */
+	NUBUS_DRHW_APPLE_SONORA   = 0x0022, /* Sonora built-in video */
+	NUBUS_DRHW_APPLE_24AC     = 0x002b, /* Mac 24AC Video Card */
+	NUBUS_DRHW_APPLE_VALKYRIE = 0x002e,
+	NUBUS_DRHW_APPLE_JET      = 0x0029, /* Jet framebuffer (DuoDock) */
+	NUBUS_DRHW_SMAC_GFX       = 0x0105, /* SuperMac GFX */
+	NUBUS_DRHW_RASTER_CB264   = 0x013B, /* RasterOps ColorBoard 264 */
+	NUBUS_DRHW_MICRON_XCEED   = 0x0146, /* Micron Exceed color */
+	NUBUS_DRHW_RDIUS_GSC      = 0x0153, /* Radius GS/C */
+	NUBUS_DRHW_SMAC_SPEC8     = 0x017B, /* SuperMac Spectrum/8 */
+	NUBUS_DRHW_SMAC_SPEC24    = 0x017C, /* SuperMac Spectrum/24 */
+	NUBUS_DRHW_RASTER_CB364   = 0x026F, /* RasterOps ColorBoard 364 */
+	NUBUS_DRHW_RDIUS_DCGX     = 0x027C, /* Radius DirectColor/GX */
+	NUBUS_DRHW_RDIUS_PC8      = 0x0291, /* Radius PrecisionColor 8 */
+	NUBUS_DRHW_LAPIS_PCS8     = 0x0292, /* Lapis ProColorServer 8 */
+	NUBUS_DRHW_RASTER_24XLI   = 0x02A0, /* RasterOps 8/24 XLi */
+	NUBUS_DRHW_RASTER_PBPGT   = 0x02A5, /* RasterOps PaintBoard Prism GT */
+	NUBUS_DRHW_EMACH_FSX      = 0x02AE, /* E-Machines Futura SX */
+	NUBUS_DRHW_RASTER_24XLTV  = 0x02B7, /* RasterOps 24XLTV */
+	NUBUS_DRHW_SMAC_THUND24   = 0x02CB, /* SuperMac Thunder/24 */
+	NUBUS_DRHW_SMAC_THUNDLGHT = 0x03D9, /* SuperMac ThunderLight */
+	NUBUS_DRHW_RDIUS_PC24XP   = 0x0406, /* Radius PrecisionColor 24Xp */
+	NUBUS_DRHW_RDIUS_PC24X    = 0x040A, /* Radius PrecisionColor 24X */
+	NUBUS_DRHW_RDIUS_PC8XJ    = 0x040B, /* Radius PrecisionColor 8XJ */
+	
+	/* NUBUS_CAT_NETWORK */
+	NUBUS_DRHW_INTERLAN       = 0x0100,
+	NUBUS_DRHW_SMC9194        = 0x0101,
+	NUBUS_DRHW_KINETICS       = 0x0106,
+	NUBUS_DRHW_CABLETRON      = 0x0109,
+	NUBUS_DRHW_ASANTE_LC      = 0x010f,
+	NUBUS_DRHW_SONIC          = 0x0110,
+	NUBUS_DRHW_TECHWORKS      = 0x0112,
+	NUBUS_DRHW_APPLE_SONIC_NB = 0x0118,
+	NUBUS_DRHW_APPLE_SONIC_LC = 0x0119,
+	NUBUS_DRHW_FOCUS          = 0x011c,
+	NUBUS_DRHW_SONNET         = 0x011d,
+};
+
+/* Resource IDs: These are the identifiers for the various weird and
+   wonderful tidbits of information that may or may not reside in the
+   NuBus ROM directory. */
+enum nubus_res_id {
+	NUBUS_RESID_TYPE         = 0x0001,
+	NUBUS_RESID_NAME         = 0x0002,
+	NUBUS_RESID_ICON         = 0x0003,
+	NUBUS_RESID_DRVRDIR      = 0x0004,
+	NUBUS_RESID_LOADREC      = 0x0005,
+	NUBUS_RESID_BOOTREC      = 0x0006,
+	NUBUS_RESID_FLAGS        = 0x0007,
+	NUBUS_RESID_HWDEVID      = 0x0008,
+	NUBUS_RESID_MINOR_BASEOS = 0x000a,
+	NUBUS_RESID_MINOR_LENGTH = 0x000b,
+	NUBUS_RESID_MAJOR_BASEOS = 0x000c,
+	NUBUS_RESID_MAJOR_LENGTH = 0x000d,
+	NUBUS_RESID_CICN         = 0x000f,
+	NUBUS_RESID_ICL8         = 0x0010,
+	NUBUS_RESID_ICL4         = 0x0011,
+};
+
+/* Category-specific resources. */
+enum nubus_board_res_id {
+	NUBUS_RESID_BOARDID      = 0x0020,
+	NUBUS_RESID_PRAMINITDATA = 0x0021,
+	NUBUS_RESID_PRIMARYINIT  = 0x0022,
+	NUBUS_RESID_TIMEOUTCONST = 0x0023,
+	NUBUS_RESID_VENDORINFO   = 0x0024,
+	NUBUS_RESID_BOARDFLAGS   = 0x0025,
+	NUBUS_RESID_SECONDINIT   = 0x0026,
+
+	/* Not sure why Apple put these next two in here */
+	NUBUS_RESID_VIDNAMES     = 0x0041,
+	NUBUS_RESID_VIDMODES     = 0x007e
+};
+
+/* Fields within the vendor info directory */
+enum nubus_vendor_res_id {
+	NUBUS_RESID_VEND_ID     = 0x0001,
+	NUBUS_RESID_VEND_SERIAL = 0x0002,
+	NUBUS_RESID_VEND_REV    = 0x0003,
+	NUBUS_RESID_VEND_PART   = 0x0004,
+	NUBUS_RESID_VEND_DATE   = 0x0005
+};
+
+enum nubus_net_res_id {
+	NUBUS_RESID_MAC_ADDRESS  = 0x0080
+};
+
+enum nubus_cpu_res_id {
+	NUBUS_RESID_MEMINFO      = 0x0081,
+	NUBUS_RESID_ROMINFO      = 0x0082
+};
+
+enum nubus_display_res_id {
+	NUBUS_RESID_GAMMADIR    = 0x0040,
+	NUBUS_RESID_FIRSTMODE   = 0x0080,
+	NUBUS_RESID_SECONDMODE  = 0x0081,
+	NUBUS_RESID_THIRDMODE   = 0x0082,
+	NUBUS_RESID_FOURTHMODE  = 0x0083,
+	NUBUS_RESID_FIFTHMODE   = 0x0084,
+	NUBUS_RESID_SIXTHMODE   = 0x0085
+};
+
+struct nubus_dir
+{
+	unsigned char *base;
+	unsigned char *ptr;
+	int done;
+	int mask;
+};
+
+struct nubus_dirent
+{
+	unsigned char *base;
+	unsigned char type;
+	__u32 data;	/* Actually 24bits used */
+	int mask;
+};
+
+#ifdef __KERNEL__
+struct nubus_board {
+	struct nubus_board* next;
+	struct nubus_dev* first_dev;
+	
+	/* Only 9-E actually exist, though 0-8 are also theoretically
+	   possible, and 0 is a special case which represents the
+	   motherboard and onboard peripherals (Ethernet, video) */
+	int slot;
+	/* For slot 0, this is bogus. */
+	char name[64];
+
+	/* Format block */
+	unsigned char* fblock;
+	/* Root directory (does *not* always equal fblock + doffset!) */
+	unsigned char* directory;
+	
+	unsigned long slot_addr;
+	/* Offset to root directory (sometimes) */
+	unsigned long doffset;
+	/* Length over which to compute the crc */
+	unsigned long rom_length;
+	/* Completely useless most of the time */
+	unsigned long crc;
+	unsigned char rev;
+	unsigned char format;
+	unsigned char lanes;
+};
+
+struct nubus_dev {
+	/* Next link in device list */
+	struct nubus_dev* next;
+	/* Directory entry in /proc/bus/nubus */
+	struct proc_dir_entry* procdir;
+
+	/* The functional resource ID of this device */
+	unsigned char resid;
+	/* These are mostly here for convenience; we could always read
+	   them from the ROMs if we wanted to */
+	unsigned short category;
+	unsigned short type;
+	unsigned short dr_sw;
+	unsigned short dr_hw;
+	/* This is the device's name rather than the board's.
+	   Sometimes they are different.  Usually the board name is
+	   more correct. */
+	char name[64];
+	/* MacOS driver (I kid you not) */
+	unsigned char* driver;
+	/* Actually this is an offset */
+	unsigned long iobase;
+	unsigned long iosize;
+	unsigned char flags, hwdevid;
+	
+	/* Functional directory */
+	unsigned char* directory;
+	/* Much of our info comes from here */
+	struct nubus_board* board;
+};
+
+/* This is all NuBus devices (used to find devices later on) */
+extern struct nubus_dev* nubus_devices;
+/* This is all NuBus cards */
+extern struct nubus_board* nubus_boards;
+
+/* Generic NuBus interface functions, modelled after the PCI interface */
+void nubus_scan_bus(void);
+extern void nubus_proc_init(void);
+int get_nubus_list(char *buf);
+int nubus_proc_attach_device(struct nubus_dev *dev);
+int nubus_proc_detach_device(struct nubus_dev *dev);
+/* If we need more precision we can add some more of these */
+struct nubus_dev* nubus_find_device(unsigned short category,
+				    unsigned short type,
+				    unsigned short dr_hw,
+				    unsigned short dr_sw,
+				    const struct nubus_dev* from);
+struct nubus_dev* nubus_find_type(unsigned short category,
+				  unsigned short type,
+				  const struct nubus_dev* from);
+/* Might have more than one device in a slot, you know... */
+struct nubus_dev* nubus_find_slot(unsigned int slot,
+				  const struct nubus_dev* from);
+
+/* These are somewhat more NuBus-specific.  They all return 0 for
+   success and -1 for failure, as you'd expect. */
+
+/* The root directory which contains the board and functional
+   directories */
+int nubus_get_root_dir(const struct nubus_board* board,
+		       struct nubus_dir* dir);
+/* The board directory */
+int nubus_get_board_dir(const struct nubus_board* board,
+			struct nubus_dir* dir);
+/* The functional directory */
+int nubus_get_func_dir(const struct nubus_dev* dev,
+		       struct nubus_dir* dir);
+
+/* These work on any directory gotten via the above */
+int nubus_readdir(struct nubus_dir* dir,
+		  struct nubus_dirent* ent);
+int nubus_find_rsrc(struct nubus_dir* dir,
+		    unsigned char rsrc_type,
+		    struct nubus_dirent* ent);
+int nubus_rewinddir(struct nubus_dir* dir);
+
+/* Things to do with directory entries */
+int nubus_get_subdir(const struct nubus_dirent* ent,
+		     struct nubus_dir* dir);
+void nubus_get_rsrc_mem(void* dest,
+			const struct nubus_dirent *dirent,
+			int len);
+void nubus_get_rsrc_str(void* dest,
+			const struct nubus_dirent *dirent,
+			int maxlen);
+#endif /* __KERNEL__ */
+
+/* We'd like to get rid of this eventually.  Only daynaport.c uses it now. */
+static inline void *nubus_slot_addr(int slot)
+{
+	return (void *)(0xF0000000|(slot<<24));
+}
+
+#endif /* LINUX_NUBUS_H */
diff --git a/include/linux/numa.h b/include/linux/numa.h
new file mode 100644
index 00000000..3aaa3160
--- /dev/null
+++ b/include/linux/numa.h
@@ -0,0 +1,15 @@
+#ifndef _LINUX_NUMA_H
+#define _LINUX_NUMA_H
+
+
+#ifdef CONFIG_NODES_SHIFT
+#define NODES_SHIFT     CONFIG_NODES_SHIFT
+#else
+#define NODES_SHIFT     0
+#endif
+
+#define MAX_NUMNODES    (1 << NODES_SHIFT)
+
+#define	NUMA_NO_NODE	(-1)
+
+#endif /* _LINUX_NUMA_H */
diff --git a/include/linux/nvme.h b/include/linux/nvme.h
new file mode 100644
index 00000000..9490a005
--- /dev/null
+++ b/include/linux/nvme.h
@@ -0,0 +1,434 @@
+/*
+ * Definitions for the NVM Express interface
+ * Copyright (c) 2011, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef _LINUX_NVME_H
+#define _LINUX_NVME_H
+
+#include <linux/types.h>
+
+struct nvme_bar {
+	__u64			cap;	/* Controller Capabilities */
+	__u32			vs;	/* Version */
+	__u32			intms;	/* Interrupt Mask Set */
+	__u32			intmc;	/* Interrupt Mask Clear */
+	__u32			cc;	/* Controller Configuration */
+	__u32			rsvd1;	/* Reserved */
+	__u32			csts;	/* Controller Status */
+	__u32			rsvd2;	/* Reserved */
+	__u32			aqa;	/* Admin Queue Attributes */
+	__u64			asq;	/* Admin SQ Base Address */
+	__u64			acq;	/* Admin CQ Base Address */
+};
+
+#define NVME_CAP_TIMEOUT(cap)	(((cap) >> 24) & 0xff)
+#define NVME_CAP_STRIDE(cap)	(((cap) >> 32) & 0xf)
+
+enum {
+	NVME_CC_ENABLE		= 1 << 0,
+	NVME_CC_CSS_NVM		= 0 << 4,
+	NVME_CC_MPS_SHIFT	= 7,
+	NVME_CC_ARB_RR		= 0 << 11,
+	NVME_CC_ARB_WRRU	= 1 << 11,
+	NVME_CC_ARB_VS		= 7 << 11,
+	NVME_CC_SHN_NONE	= 0 << 14,
+	NVME_CC_SHN_NORMAL	= 1 << 14,
+	NVME_CC_SHN_ABRUPT	= 2 << 14,
+	NVME_CC_IOSQES		= 6 << 16,
+	NVME_CC_IOCQES		= 4 << 20,
+	NVME_CSTS_RDY		= 1 << 0,
+	NVME_CSTS_CFS		= 1 << 1,
+	NVME_CSTS_SHST_NORMAL	= 0 << 2,
+	NVME_CSTS_SHST_OCCUR	= 1 << 2,
+	NVME_CSTS_SHST_CMPLT	= 2 << 2,
+};
+
+struct nvme_id_power_state {
+	__le16			max_power;	/* centiwatts */
+	__u16			rsvd2;
+	__le32			entry_lat;	/* microseconds */
+	__le32			exit_lat;	/* microseconds */
+	__u8			read_tput;
+	__u8			read_lat;
+	__u8			write_tput;
+	__u8			write_lat;
+	__u8			rsvd16[16];
+};
+
+#define NVME_VS(major, minor)	(major << 16 | minor)
+
+struct nvme_id_ctrl {
+	__le16			vid;
+	__le16			ssvid;
+	char			sn[20];
+	char			mn[40];
+	char			fr[8];
+	__u8			rab;
+	__u8			ieee[3];
+	__u8			mic;
+	__u8			mdts;
+	__u8			rsvd78[178];
+	__le16			oacs;
+	__u8			acl;
+	__u8			aerl;
+	__u8			frmw;
+	__u8			lpa;
+	__u8			elpe;
+	__u8			npss;
+	__u8			rsvd264[248];
+	__u8			sqes;
+	__u8			cqes;
+	__u8			rsvd514[2];
+	__le32			nn;
+	__le16			oncs;
+	__le16			fuses;
+	__u8			fna;
+	__u8			vwc;
+	__le16			awun;
+	__le16			awupf;
+	__u8			rsvd530[1518];
+	struct nvme_id_power_state	psd[32];
+	__u8			vs[1024];
+};
+
+struct nvme_lbaf {
+	__le16			ms;
+	__u8			ds;
+	__u8			rp;
+};
+
+struct nvme_id_ns {
+	__le64			nsze;
+	__le64			ncap;
+	__le64			nuse;
+	__u8			nsfeat;
+	__u8			nlbaf;
+	__u8			flbas;
+	__u8			mc;
+	__u8			dpc;
+	__u8			dps;
+	__u8			rsvd30[98];
+	struct nvme_lbaf	lbaf[16];
+	__u8			rsvd192[192];
+	__u8			vs[3712];
+};
+
+enum {
+	NVME_NS_FEAT_THIN	= 1 << 0,
+	NVME_LBAF_RP_BEST	= 0,
+	NVME_LBAF_RP_BETTER	= 1,
+	NVME_LBAF_RP_GOOD	= 2,
+	NVME_LBAF_RP_DEGRADED	= 3,
+};
+
+struct nvme_lba_range_type {
+	__u8			type;
+	__u8			attributes;
+	__u8			rsvd2[14];
+	__u64			slba;
+	__u64			nlb;
+	__u8			guid[16];
+	__u8			rsvd48[16];
+};
+
+enum {
+	NVME_LBART_TYPE_FS	= 0x01,
+	NVME_LBART_TYPE_RAID	= 0x02,
+	NVME_LBART_TYPE_CACHE	= 0x03,
+	NVME_LBART_TYPE_SWAP	= 0x04,
+
+	NVME_LBART_ATTRIB_TEMP	= 1 << 0,
+	NVME_LBART_ATTRIB_HIDE	= 1 << 1,
+};
+
+/* I/O commands */
+
+enum nvme_opcode {
+	nvme_cmd_flush		= 0x00,
+	nvme_cmd_write		= 0x01,
+	nvme_cmd_read		= 0x02,
+	nvme_cmd_write_uncor	= 0x04,
+	nvme_cmd_compare	= 0x05,
+	nvme_cmd_dsm		= 0x09,
+};
+
+struct nvme_common_command {
+	__u8			opcode;
+	__u8			flags;
+	__u16			command_id;
+	__le32			nsid;
+	__u32			cdw2[2];
+	__le64			metadata;
+	__le64			prp1;
+	__le64			prp2;
+	__u32			cdw10[6];
+};
+
+struct nvme_rw_command {
+	__u8			opcode;
+	__u8			flags;
+	__u16			command_id;
+	__le32			nsid;
+	__u64			rsvd2;
+	__le64			metadata;
+	__le64			prp1;
+	__le64			prp2;
+	__le64			slba;
+	__le16			length;
+	__le16			control;
+	__le32			dsmgmt;
+	__le32			reftag;
+	__le16			apptag;
+	__le16			appmask;
+};
+
+enum {
+	NVME_RW_LR			= 1 << 15,
+	NVME_RW_FUA			= 1 << 14,
+	NVME_RW_DSM_FREQ_UNSPEC		= 0,
+	NVME_RW_DSM_FREQ_TYPICAL	= 1,
+	NVME_RW_DSM_FREQ_RARE		= 2,
+	NVME_RW_DSM_FREQ_READS		= 3,
+	NVME_RW_DSM_FREQ_WRITES		= 4,
+	NVME_RW_DSM_FREQ_RW		= 5,
+	NVME_RW_DSM_FREQ_ONCE		= 6,
+	NVME_RW_DSM_FREQ_PREFETCH	= 7,
+	NVME_RW_DSM_FREQ_TEMP		= 8,
+	NVME_RW_DSM_LATENCY_NONE	= 0 << 4,
+	NVME_RW_DSM_LATENCY_IDLE	= 1 << 4,
+	NVME_RW_DSM_LATENCY_NORM	= 2 << 4,
+	NVME_RW_DSM_LATENCY_LOW		= 3 << 4,
+	NVME_RW_DSM_SEQ_REQ		= 1 << 6,
+	NVME_RW_DSM_COMPRESSED		= 1 << 7,
+};
+
+/* Admin commands */
+
+enum nvme_admin_opcode {
+	nvme_admin_delete_sq		= 0x00,
+	nvme_admin_create_sq		= 0x01,
+	nvme_admin_get_log_page		= 0x02,
+	nvme_admin_delete_cq		= 0x04,
+	nvme_admin_create_cq		= 0x05,
+	nvme_admin_identify		= 0x06,
+	nvme_admin_abort_cmd		= 0x08,
+	nvme_admin_set_features		= 0x09,
+	nvme_admin_get_features		= 0x0a,
+	nvme_admin_async_event		= 0x0c,
+	nvme_admin_activate_fw		= 0x10,
+	nvme_admin_download_fw		= 0x11,
+	nvme_admin_format_nvm		= 0x80,
+	nvme_admin_security_send	= 0x81,
+	nvme_admin_security_recv	= 0x82,
+};
+
+enum {
+	NVME_QUEUE_PHYS_CONTIG	= (1 << 0),
+	NVME_CQ_IRQ_ENABLED	= (1 << 1),
+	NVME_SQ_PRIO_URGENT	= (0 << 1),
+	NVME_SQ_PRIO_HIGH	= (1 << 1),
+	NVME_SQ_PRIO_MEDIUM	= (2 << 1),
+	NVME_SQ_PRIO_LOW	= (3 << 1),
+	NVME_FEAT_ARBITRATION	= 0x01,
+	NVME_FEAT_POWER_MGMT	= 0x02,
+	NVME_FEAT_LBA_RANGE	= 0x03,
+	NVME_FEAT_TEMP_THRESH	= 0x04,
+	NVME_FEAT_ERR_RECOVERY	= 0x05,
+	NVME_FEAT_VOLATILE_WC	= 0x06,
+	NVME_FEAT_NUM_QUEUES	= 0x07,
+	NVME_FEAT_IRQ_COALESCE	= 0x08,
+	NVME_FEAT_IRQ_CONFIG	= 0x09,
+	NVME_FEAT_WRITE_ATOMIC	= 0x0a,
+	NVME_FEAT_ASYNC_EVENT	= 0x0b,
+	NVME_FEAT_SW_PROGRESS	= 0x0c,
+};
+
+struct nvme_identify {
+	__u8			opcode;
+	__u8			flags;
+	__u16			command_id;
+	__le32			nsid;
+	__u64			rsvd2[2];
+	__le64			prp1;
+	__le64			prp2;
+	__le32			cns;
+	__u32			rsvd11[5];
+};
+
+struct nvme_features {
+	__u8			opcode;
+	__u8			flags;
+	__u16			command_id;
+	__le32			nsid;
+	__u64			rsvd2[2];
+	__le64			prp1;
+	__le64			prp2;
+	__le32			fid;
+	__le32			dword11;
+	__u32			rsvd12[4];
+};
+
+struct nvme_create_cq {
+	__u8			opcode;
+	__u8			flags;
+	__u16			command_id;
+	__u32			rsvd1[5];
+	__le64			prp1;
+	__u64			rsvd8;
+	__le16			cqid;
+	__le16			qsize;
+	__le16			cq_flags;
+	__le16			irq_vector;
+	__u32			rsvd12[4];
+};
+
+struct nvme_create_sq {
+	__u8			opcode;
+	__u8			flags;
+	__u16			command_id;
+	__u32			rsvd1[5];
+	__le64			prp1;
+	__u64			rsvd8;
+	__le16			sqid;
+	__le16			qsize;
+	__le16			sq_flags;
+	__le16			cqid;
+	__u32			rsvd12[4];
+};
+
+struct nvme_delete_queue {
+	__u8			opcode;
+	__u8			flags;
+	__u16			command_id;
+	__u32			rsvd1[9];
+	__le16			qid;
+	__u16			rsvd10;
+	__u32			rsvd11[5];
+};
+
+struct nvme_download_firmware {
+	__u8			opcode;
+	__u8			flags;
+	__u16			command_id;
+	__u32			rsvd1[5];
+	__le64			prp1;
+	__le64			prp2;
+	__le32			numd;
+	__le32			offset;
+	__u32			rsvd12[4];
+};
+
+struct nvme_command {
+	union {
+		struct nvme_common_command common;
+		struct nvme_rw_command rw;
+		struct nvme_identify identify;
+		struct nvme_features features;
+		struct nvme_create_cq create_cq;
+		struct nvme_create_sq create_sq;
+		struct nvme_delete_queue delete_queue;
+		struct nvme_download_firmware dlfw;
+	};
+};
+
+enum {
+	NVME_SC_SUCCESS			= 0x0,
+	NVME_SC_INVALID_OPCODE		= 0x1,
+	NVME_SC_INVALID_FIELD		= 0x2,
+	NVME_SC_CMDID_CONFLICT		= 0x3,
+	NVME_SC_DATA_XFER_ERROR		= 0x4,
+	NVME_SC_POWER_LOSS		= 0x5,
+	NVME_SC_INTERNAL		= 0x6,
+	NVME_SC_ABORT_REQ		= 0x7,
+	NVME_SC_ABORT_QUEUE		= 0x8,
+	NVME_SC_FUSED_FAIL		= 0x9,
+	NVME_SC_FUSED_MISSING		= 0xa,
+	NVME_SC_INVALID_NS		= 0xb,
+	NVME_SC_LBA_RANGE		= 0x80,
+	NVME_SC_CAP_EXCEEDED		= 0x81,
+	NVME_SC_NS_NOT_READY		= 0x82,
+	NVME_SC_CQ_INVALID		= 0x100,
+	NVME_SC_QID_INVALID		= 0x101,
+	NVME_SC_QUEUE_SIZE		= 0x102,
+	NVME_SC_ABORT_LIMIT		= 0x103,
+	NVME_SC_ABORT_MISSING		= 0x104,
+	NVME_SC_ASYNC_LIMIT		= 0x105,
+	NVME_SC_FIRMWARE_SLOT		= 0x106,
+	NVME_SC_FIRMWARE_IMAGE		= 0x107,
+	NVME_SC_INVALID_VECTOR		= 0x108,
+	NVME_SC_INVALID_LOG_PAGE	= 0x109,
+	NVME_SC_INVALID_FORMAT		= 0x10a,
+	NVME_SC_BAD_ATTRIBUTES		= 0x180,
+	NVME_SC_WRITE_FAULT		= 0x280,
+	NVME_SC_READ_ERROR		= 0x281,
+	NVME_SC_GUARD_CHECK		= 0x282,
+	NVME_SC_APPTAG_CHECK		= 0x283,
+	NVME_SC_REFTAG_CHECK		= 0x284,
+	NVME_SC_COMPARE_FAILED		= 0x285,
+	NVME_SC_ACCESS_DENIED		= 0x286,
+};
+
+struct nvme_completion {
+	__le32	result;		/* Used by admin commands to return data */
+	__u32	rsvd;
+	__le16	sq_head;	/* how much of this queue may be reclaimed */
+	__le16	sq_id;		/* submission queue that generated this entry */
+	__u16	command_id;	/* of the command which completed */
+	__le16	status;		/* did the command fail, and if so, why? */
+};
+
+struct nvme_user_io {
+	__u8	opcode;
+	__u8	flags;
+	__u16	control;
+	__u16	nblocks;
+	__u16	rsvd;
+	__u64	metadata;
+	__u64	addr;
+	__u64	slba;
+	__u32	dsmgmt;
+	__u32	reftag;
+	__u16	apptag;
+	__u16	appmask;
+};
+
+struct nvme_admin_cmd {
+	__u8	opcode;
+	__u8	flags;
+	__u16	rsvd1;
+	__u32	nsid;
+	__u32	cdw2;
+	__u32	cdw3;
+	__u64	metadata;
+	__u64	addr;
+	__u32	metadata_len;
+	__u32	data_len;
+	__u32	cdw10;
+	__u32	cdw11;
+	__u32	cdw12;
+	__u32	cdw13;
+	__u32	cdw14;
+	__u32	cdw15;
+	__u32	timeout_ms;
+	__u32	result;
+};
+
+#define NVME_IOCTL_ID		_IO('N', 0x40)
+#define NVME_IOCTL_ADMIN_CMD	_IOWR('N', 0x41, struct nvme_admin_cmd)
+#define NVME_IOCTL_SUBMIT_IO	_IOW('N', 0x42, struct nvme_user_io)
+
+#endif /* _LINUX_NVME_H */
diff --git a/include/linux/nvram.h b/include/linux/nvram.h
new file mode 100644
index 00000000..9189829c
--- /dev/null
+++ b/include/linux/nvram.h
@@ -0,0 +1,25 @@
+#ifndef _LINUX_NVRAM_H
+#define _LINUX_NVRAM_H
+
+#include <linux/ioctl.h>
+
+/* /dev/nvram ioctls */
+#define NVRAM_INIT	_IO('p', 0x40) /* initialize NVRAM and set checksum */
+#define NVRAM_SETCKS	_IO('p', 0x41) /* recalculate checksum */
+
+/* for all current systems, this is where NVRAM starts */
+#define NVRAM_FIRST_BYTE    14
+/* all these functions expect an NVRAM offset, not an absolute */
+#define NVRAM_OFFSET(x)   ((x)-NVRAM_FIRST_BYTE)
+
+#ifdef __KERNEL__
+/* __foo is foo without grabbing the rtc_lock - get it yourself */
+extern unsigned char __nvram_read_byte(int i);
+extern unsigned char nvram_read_byte(int i);
+extern void __nvram_write_byte(unsigned char c, int i);
+extern void nvram_write_byte(unsigned char c, int i);
+extern int __nvram_check_checksum(void);
+extern int nvram_check_checksum(void);
+#endif
+
+#endif  /* _LINUX_NVRAM_H */
diff --git a/include/linux/nwpserial.h b/include/linux/nwpserial.h
new file mode 100644
index 00000000..9acb2157
--- /dev/null
+++ b/include/linux/nwpserial.h
@@ -0,0 +1,18 @@
+/*
+ *  Serial Port driver for a NWP uart device
+ *
+ *    Copyright (C) 2008 IBM Corp., Benjamin Krill <ben@codiert.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+#ifndef _NWPSERIAL_H
+#define _NWPSERIAL_H
+
+int nwpserial_register_port(struct uart_port *port);
+void nwpserial_unregister_port(int line);
+
+#endif /* _NWPSERIAL_H */
diff --git a/include/linux/of.h b/include/linux/of.h
new file mode 100644
index 00000000..fa7fb1d9
--- /dev/null
+++ b/include/linux/of.h
@@ -0,0 +1,377 @@
+#ifndef _LINUX_OF_H
+#define _LINUX_OF_H
+/*
+ * Definitions for talking to the Open Firmware PROM on
+ * Power Macintosh and other computers.
+ *
+ * Copyright (C) 1996-2005 Paul Mackerras.
+ *
+ * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp.
+ * Updates for SPARC64 by David S. Miller
+ * Derived from PowerPC and Sparc prom.h files by Stephen Rothwell, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/kref.h>
+#include <linux/mod_devicetable.h>
+#include <linux/spinlock.h>
+
+#include <asm/byteorder.h>
+#include <asm/errno.h>
+
+typedef u32 phandle;
+typedef u32 ihandle;
+
+struct property {
+	char	*name;
+	int	length;
+	void	*value;
+	struct property *next;
+	unsigned long _flags;
+	unsigned int unique_id;
+};
+
+#if defined(CONFIG_SPARC)
+struct of_irq_controller;
+#endif
+
+struct device_node {
+	const char *name;
+	const char *type;
+	phandle phandle;
+	char	*full_name;
+
+	struct	property *properties;
+	struct	property *deadprops;	/* removed properties */
+	struct	device_node *parent;
+	struct	device_node *child;
+	struct	device_node *sibling;
+	struct	device_node *next;	/* next device of same type */
+	struct	device_node *allnext;	/* next in list of all nodes */
+	struct	proc_dir_entry *pde;	/* this node's proc directory */
+	struct	kref kref;
+	unsigned long _flags;
+	void	*data;
+#if defined(CONFIG_SPARC)
+	char	*path_component_name;
+	unsigned int unique_id;
+	struct of_irq_controller *irq_trans;
+#endif
+};
+
+#define MAX_PHANDLE_ARGS 8
+struct of_phandle_args {
+	struct device_node *np;
+	int args_count;
+	uint32_t args[MAX_PHANDLE_ARGS];
+};
+
+#ifdef CONFIG_OF_DYNAMIC
+extern struct device_node *of_node_get(struct device_node *node);
+extern void of_node_put(struct device_node *node);
+#else /* CONFIG_OF_DYNAMIC */
+/* Dummy ref counting routines - to be implemented later */
+static inline struct device_node *of_node_get(struct device_node *node)
+{
+	return node;
+}
+static inline void of_node_put(struct device_node *node) { }
+#endif /* !CONFIG_OF_DYNAMIC */
+
+#ifdef CONFIG_OF
+
+/* Pointer for first entry in chain of all nodes. */
+extern struct device_node *allnodes;
+extern struct device_node *of_chosen;
+extern struct device_node *of_aliases;
+extern rwlock_t devtree_lock;
+
+static inline bool of_have_populated_dt(void)
+{
+	return allnodes != NULL;
+}
+
+static inline bool of_node_is_root(const struct device_node *node)
+{
+	return node && (node->parent == NULL);
+}
+
+static inline int of_node_check_flag(struct device_node *n, unsigned long flag)
+{
+	return test_bit(flag, &n->_flags);
+}
+
+static inline void of_node_set_flag(struct device_node *n, unsigned long flag)
+{
+	set_bit(flag, &n->_flags);
+}
+
+extern struct device_node *of_find_all_nodes(struct device_node *prev);
+
+/*
+ * OF address retrieval & translation
+ */
+
+/* Helper to read a big number; size is in cells (not bytes) */
+static inline u64 of_read_number(const __be32 *cell, int size)
+{
+	u64 r = 0;
+	while (size--)
+		r = (r << 32) | be32_to_cpu(*(cell++));
+	return r;
+}
+
+/* Like of_read_number, but we want an unsigned long result */
+static inline unsigned long of_read_ulong(const __be32 *cell, int size)
+{
+	/* toss away upper bits if unsigned long is smaller than u64 */
+	return of_read_number(cell, size);
+}
+
+#include <asm/prom.h>
+
+/* Default #address and #size cells.  Allow arch asm/prom.h to override */
+#if !defined(OF_ROOT_NODE_ADDR_CELLS_DEFAULT)
+#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 1
+#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1
+#endif
+
+/* Default string compare functions, Allow arch asm/prom.h to override */
+#if !defined(of_compat_cmp)
+#define of_compat_cmp(s1, s2, l)	strcasecmp((s1), (s2))
+#define of_prop_cmp(s1, s2)		strcmp((s1), (s2))
+#define of_node_cmp(s1, s2)		strcasecmp((s1), (s2))
+#endif
+
+/* flag descriptions */
+#define OF_DYNAMIC	1 /* node and properties were allocated via kmalloc */
+#define OF_DETACHED	2 /* node has been detached from the device tree */
+
+#define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags)
+#define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags)
+
+#define OF_BAD_ADDR	((u64)-1)
+
+#ifndef of_node_to_nid
+static inline int of_node_to_nid(struct device_node *np) { return -1; }
+#define of_node_to_nid of_node_to_nid
+#endif
+
+extern struct device_node *of_find_node_by_name(struct device_node *from,
+	const char *name);
+#define for_each_node_by_name(dn, name) \
+	for (dn = of_find_node_by_name(NULL, name); dn; \
+	     dn = of_find_node_by_name(dn, name))
+extern struct device_node *of_find_node_by_type(struct device_node *from,
+	const char *type);
+#define for_each_node_by_type(dn, type) \
+	for (dn = of_find_node_by_type(NULL, type); dn; \
+	     dn = of_find_node_by_type(dn, type))
+extern struct device_node *of_find_compatible_node(struct device_node *from,
+	const char *type, const char *compat);
+#define for_each_compatible_node(dn, type, compatible) \
+	for (dn = of_find_compatible_node(NULL, type, compatible); dn; \
+	     dn = of_find_compatible_node(dn, type, compatible))
+extern struct device_node *of_find_matching_node(struct device_node *from,
+	const struct of_device_id *matches);
+#define for_each_matching_node(dn, matches) \
+	for (dn = of_find_matching_node(NULL, matches); dn; \
+	     dn = of_find_matching_node(dn, matches))
+extern struct device_node *of_find_node_by_path(const char *path);
+extern struct device_node *of_find_node_by_phandle(phandle handle);
+extern struct device_node *of_get_parent(const struct device_node *node);
+extern struct device_node *of_get_next_parent(struct device_node *node);
+extern struct device_node *of_get_next_child(const struct device_node *node,
+					     struct device_node *prev);
+#define for_each_child_of_node(parent, child) \
+	for (child = of_get_next_child(parent, NULL); child != NULL; \
+	     child = of_get_next_child(parent, child))
+
+extern struct device_node *of_find_node_with_property(
+	struct device_node *from, const char *prop_name);
+#define for_each_node_with_property(dn, prop_name) \
+	for (dn = of_find_node_with_property(NULL, prop_name); dn; \
+	     dn = of_find_node_with_property(dn, prop_name))
+
+extern struct property *of_find_property(const struct device_node *np,
+					 const char *name,
+					 int *lenp);
+extern int of_property_read_u32_array(const struct device_node *np,
+				      const char *propname,
+				      u32 *out_values,
+				      size_t sz);
+extern int of_property_read_u64(const struct device_node *np,
+				const char *propname, u64 *out_value);
+
+extern int of_property_read_string(struct device_node *np,
+				   const char *propname,
+				   const char **out_string);
+extern int of_property_read_string_index(struct device_node *np,
+					 const char *propname,
+					 int index, const char **output);
+extern int of_property_match_string(struct device_node *np,
+				    const char *propname,
+				    const char *string);
+extern int of_property_count_strings(struct device_node *np,
+				     const char *propname);
+extern int of_device_is_compatible(const struct device_node *device,
+				   const char *);
+extern int of_device_is_available(const struct device_node *device);
+extern const void *of_get_property(const struct device_node *node,
+				const char *name,
+				int *lenp);
+#define for_each_property_of_node(dn, pp) \
+	for (pp = dn->properties; pp != NULL; pp = pp->next)
+
+extern int of_n_addr_cells(struct device_node *np);
+extern int of_n_size_cells(struct device_node *np);
+extern const struct of_device_id *of_match_node(
+	const struct of_device_id *matches, const struct device_node *node);
+extern int of_modalias_node(struct device_node *node, char *modalias, int len);
+extern struct device_node *of_parse_phandle(struct device_node *np,
+					    const char *phandle_name,
+					    int index);
+extern int of_parse_phandle_with_args(struct device_node *np,
+	const char *list_name, const char *cells_name, int index,
+	struct of_phandle_args *out_args);
+
+extern void of_alias_scan(void * (*dt_alloc)(u64 size, u64 align));
+extern int of_alias_get_id(struct device_node *np, const char *stem);
+
+extern int of_machine_is_compatible(const char *compat);
+
+extern int prom_add_property(struct device_node* np, struct property* prop);
+extern int prom_remove_property(struct device_node *np, struct property *prop);
+extern int prom_update_property(struct device_node *np,
+				struct property *newprop,
+				struct property *oldprop);
+
+#if defined(CONFIG_OF_DYNAMIC)
+/* For updating the device tree at runtime */
+extern void of_attach_node(struct device_node *);
+extern void of_detach_node(struct device_node *);
+#endif
+
+#define of_match_ptr(_ptr)	(_ptr)
+#else /* CONFIG_OF */
+
+static inline bool of_have_populated_dt(void)
+{
+	return false;
+}
+
+#define for_each_child_of_node(parent, child) \
+	while (0)
+
+static inline int of_device_is_compatible(const struct device_node *device,
+					  const char *name)
+{
+	return 0;
+}
+
+static inline struct property *of_find_property(const struct device_node *np,
+						const char *name,
+						int *lenp)
+{
+	return NULL;
+}
+
+static inline struct device_node *of_find_compatible_node(
+						struct device_node *from,
+						const char *type,
+						const char *compat)
+{
+	return NULL;
+}
+
+static inline int of_property_read_u32_array(const struct device_node *np,
+					     const char *propname,
+					     u32 *out_values, size_t sz)
+{
+	return -ENOSYS;
+}
+
+static inline int of_property_read_string(struct device_node *np,
+					  const char *propname,
+					  const char **out_string)
+{
+	return -ENOSYS;
+}
+
+static inline int of_property_read_string_index(struct device_node *np,
+						const char *propname, int index,
+						const char **out_string)
+{
+	return -ENOSYS;
+}
+
+static inline int of_property_count_strings(struct device_node *np,
+					    const char *propname)
+{
+	return -ENOSYS;
+}
+
+static inline const void *of_get_property(const struct device_node *node,
+				const char *name,
+				int *lenp)
+{
+	return NULL;
+}
+
+static inline int of_property_read_u64(const struct device_node *np,
+				       const char *propname, u64 *out_value)
+{
+	return -ENOSYS;
+}
+
+static inline struct device_node *of_parse_phandle(struct device_node *np,
+						   const char *phandle_name,
+						   int index)
+{
+	return NULL;
+}
+
+static inline int of_alias_get_id(struct device_node *np, const char *stem)
+{
+	return -ENOSYS;
+}
+
+static inline int of_machine_is_compatible(const char *compat)
+{
+	return 0;
+}
+
+#define of_match_ptr(_ptr)	NULL
+#define of_match_node(_matches, _node)	NULL
+#endif /* CONFIG_OF */
+
+/**
+ * of_property_read_bool - Findfrom a property
+ * @np:		device node from which the property value is to be read.
+ * @propname:	name of the property to be searched.
+ *
+ * Search for a property in a device node.
+ * Returns true if the property exist false otherwise.
+ */
+static inline bool of_property_read_bool(const struct device_node *np,
+					 const char *propname)
+{
+	struct property *prop = of_find_property(np, propname, NULL);
+
+	return prop ? true : false;
+}
+
+static inline int of_property_read_u32(const struct device_node *np,
+				       const char *propname,
+				       u32 *out_value)
+{
+	return of_property_read_u32_array(np, propname, out_value, 1);
+}
+
+#endif /* _LINUX_OF_H */
diff --git a/include/linux/of_address.h b/include/linux/of_address.h
new file mode 100644
index 00000000..01b925ad
--- /dev/null
+++ b/include/linux/of_address.h
@@ -0,0 +1,74 @@
+#ifndef __OF_ADDRESS_H
+#define __OF_ADDRESS_H
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/of.h>
+
+#ifdef CONFIG_OF_ADDRESS
+extern u64 of_translate_address(struct device_node *np, const __be32 *addr);
+extern int of_address_to_resource(struct device_node *dev, int index,
+				  struct resource *r);
+extern struct device_node *of_find_matching_node_by_address(
+					struct device_node *from,
+					const struct of_device_id *matches,
+					u64 base_address);
+extern void __iomem *of_iomap(struct device_node *device, int index);
+
+/* Extract an address from a device, returns the region size and
+ * the address space flags too. The PCI version uses a BAR number
+ * instead of an absolute index
+ */
+extern const u32 *of_get_address(struct device_node *dev, int index,
+			   u64 *size, unsigned int *flags);
+
+#ifndef pci_address_to_pio
+static inline unsigned long pci_address_to_pio(phys_addr_t addr) { return -1; }
+#define pci_address_to_pio pci_address_to_pio
+#endif
+
+#else /* CONFIG_OF_ADDRESS */
+static inline int of_address_to_resource(struct device_node *dev, int index,
+					 struct resource *r)
+{
+	return -EINVAL;
+}
+static inline struct device_node *of_find_matching_node_by_address(
+					struct device_node *from,
+					const struct of_device_id *matches,
+					u64 base_address)
+{
+	return NULL;
+}
+static inline void __iomem *of_iomap(struct device_node *device, int index)
+{
+	return NULL;
+}
+static inline const u32 *of_get_address(struct device_node *dev, int index,
+					u64 *size, unsigned int *flags)
+{
+	return NULL;
+}
+#endif /* CONFIG_OF_ADDRESS */
+
+
+#if defined(CONFIG_OF_ADDRESS) && defined(CONFIG_PCI)
+extern const __be32 *of_get_pci_address(struct device_node *dev, int bar_no,
+			       u64 *size, unsigned int *flags);
+extern int of_pci_address_to_resource(struct device_node *dev, int bar,
+				      struct resource *r);
+#else /* CONFIG_OF_ADDRESS && CONFIG_PCI */
+static inline int of_pci_address_to_resource(struct device_node *dev, int bar,
+				             struct resource *r)
+{
+	return -ENOSYS;
+}
+
+static inline const __be32 *of_get_pci_address(struct device_node *dev,
+		int bar_no, u64 *size, unsigned int *flags)
+{
+	return NULL;
+}
+#endif /* CONFIG_OF_ADDRESS && CONFIG_PCI */
+
+#endif /* __OF_ADDRESS_H */
+
diff --git a/include/linux/of_device.h b/include/linux/of_device.h
new file mode 100644
index 00000000..901b7435
--- /dev/null
+++ b/include/linux/of_device.h
@@ -0,0 +1,72 @@
+#ifndef _LINUX_OF_DEVICE_H
+#define _LINUX_OF_DEVICE_H
+
+#include <linux/platform_device.h>
+#include <linux/of_platform.h> /* temporary until merge */
+
+#ifdef CONFIG_OF_DEVICE
+#include <linux/of.h>
+#include <linux/mod_devicetable.h>
+
+struct device;
+
+extern const struct of_device_id *of_match_device(
+	const struct of_device_id *matches, const struct device *dev);
+extern void of_device_make_bus_id(struct device *dev);
+
+/**
+ * of_driver_match_device - Tell if a driver's of_match_table matches a device.
+ * @drv: the device_driver structure to test
+ * @dev: the device structure to match against
+ */
+static inline int of_driver_match_device(struct device *dev,
+					 const struct device_driver *drv)
+{
+	return of_match_device(drv->of_match_table, dev) != NULL;
+}
+
+extern struct platform_device *of_dev_get(struct platform_device *dev);
+extern void of_dev_put(struct platform_device *dev);
+
+extern int of_device_add(struct platform_device *pdev);
+extern int of_device_register(struct platform_device *ofdev);
+extern void of_device_unregister(struct platform_device *ofdev);
+
+extern ssize_t of_device_get_modalias(struct device *dev,
+					char *str, ssize_t len);
+
+extern void of_device_uevent(struct device *dev, struct kobj_uevent_env *env);
+extern int of_device_uevent_modalias(struct device *dev, struct kobj_uevent_env *env);
+
+static inline void of_device_node_put(struct device *dev)
+{
+	of_node_put(dev->of_node);
+}
+
+#else /* CONFIG_OF_DEVICE */
+
+static inline int of_driver_match_device(struct device *dev,
+					 struct device_driver *drv)
+{
+	return 0;
+}
+
+static inline void of_device_uevent(struct device *dev,
+			struct kobj_uevent_env *env) { }
+
+static inline int of_device_uevent_modalias(struct device *dev,
+				   struct kobj_uevent_env *env)
+{
+	return -ENODEV;
+}
+
+static inline void of_device_node_put(struct device *dev) { }
+
+static inline const struct of_device_id *of_match_device(
+		const struct of_device_id *matches, const struct device *dev)
+{
+	return NULL;
+}
+#endif /* CONFIG_OF_DEVICE */
+
+#endif /* _LINUX_OF_DEVICE_H */
diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h
new file mode 100644
index 00000000..ed136ad6
--- /dev/null
+++ b/include/linux/of_fdt.h
@@ -0,0 +1,125 @@
+/*
+ * Definitions for working with the Flattened Device Tree data format
+ *
+ * Copyright 2009 Benjamin Herrenschmidt, IBM Corp
+ * benh@kernel.crashing.org
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#ifndef _LINUX_OF_FDT_H
+#define _LINUX_OF_FDT_H
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+/* Definitions used by the flattened device tree */
+#define OF_DT_HEADER		0xd00dfeed	/* marker */
+#define OF_DT_BEGIN_NODE	0x1		/* Start of node, full name */
+#define OF_DT_END_NODE		0x2		/* End node */
+#define OF_DT_PROP		0x3		/* Property: name off, size,
+						 * content */
+#define OF_DT_NOP		0x4		/* nop */
+#define OF_DT_END		0x9
+
+#define OF_DT_VERSION		0x10
+
+#ifndef __ASSEMBLY__
+/*
+ * This is what gets passed to the kernel by prom_init or kexec
+ *
+ * The dt struct contains the device tree structure, full pathes and
+ * property contents. The dt strings contain a separate block with just
+ * the strings for the property names, and is fully page aligned and
+ * self contained in a page, so that it can be kept around by the kernel,
+ * each property name appears only once in this page (cheap compression)
+ *
+ * the mem_rsvmap contains a map of reserved ranges of physical memory,
+ * passing it here instead of in the device-tree itself greatly simplifies
+ * the job of everybody. It's just a list of u64 pairs (base/size) that
+ * ends when size is 0
+ */
+struct boot_param_header {
+	__be32	magic;			/* magic word OF_DT_HEADER */
+	__be32	totalsize;		/* total size of DT block */
+	__be32	off_dt_struct;		/* offset to structure */
+	__be32	off_dt_strings;		/* offset to strings */
+	__be32	off_mem_rsvmap;		/* offset to memory reserve map */
+	__be32	version;		/* format version */
+	__be32	last_comp_version;	/* last compatible version */
+	/* version 2 fields below */
+	__be32	boot_cpuid_phys;	/* Physical CPU id we're booting on */
+	/* version 3 fields below */
+	__be32	dt_strings_size;	/* size of the DT strings block */
+	/* version 17 fields below */
+	__be32	dt_struct_size;		/* size of the DT structure block */
+};
+
+#if defined(CONFIG_OF_FLATTREE)
+
+struct device_node;
+
+/* For scanning an arbitrary device-tree at any time */
+extern char *of_fdt_get_string(struct boot_param_header *blob, u32 offset);
+extern void *of_fdt_get_property(struct boot_param_header *blob,
+				 unsigned long node,
+				 const char *name,
+				 unsigned long *size);
+extern int of_fdt_is_compatible(struct boot_param_header *blob,
+				unsigned long node,
+				const char *compat);
+extern int of_fdt_match(struct boot_param_header *blob, unsigned long node,
+			const char *const *compat);
+extern void of_fdt_unflatten_tree(unsigned long *blob,
+			       struct device_node **mynodes);
+
+/* TBD: Temporary export of fdt globals - remove when code fully merged */
+extern int __initdata dt_root_addr_cells;
+extern int __initdata dt_root_size_cells;
+extern struct boot_param_header *initial_boot_params;
+
+/* For scanning the flat device-tree at boot time */
+extern char *find_flat_dt_string(u32 offset);
+extern int of_scan_flat_dt(int (*it)(unsigned long node, const char *uname,
+				     int depth, void *data),
+			   void *data);
+extern void *of_get_flat_dt_prop(unsigned long node, const char *name,
+				 unsigned long *size);
+extern int of_flat_dt_is_compatible(unsigned long node, const char *name);
+extern int of_flat_dt_match(unsigned long node, const char *const *matches);
+extern unsigned long of_get_flat_dt_root(void);
+
+extern int early_init_dt_scan_chosen(unsigned long node, const char *uname,
+				     int depth, void *data);
+extern void early_init_dt_check_for_initrd(unsigned long node);
+extern int early_init_dt_scan_memory(unsigned long node, const char *uname,
+				     int depth, void *data);
+extern void early_init_dt_add_memory_arch(u64 base, u64 size);
+extern void * early_init_dt_alloc_memory_arch(u64 size, u64 align);
+extern u64 dt_mem_next_cell(int s, __be32 **cellp);
+
+/*
+ * If BLK_DEV_INITRD, the fdt early init code will call this function,
+ * to be provided by the arch code. start and end are specified as
+ * physical addresses.
+ */
+#ifdef CONFIG_BLK_DEV_INITRD
+extern void early_init_dt_setup_initrd_arch(unsigned long start,
+					    unsigned long end);
+#endif
+
+/* Early flat tree scan hooks */
+extern int early_init_dt_scan_root(unsigned long node, const char *uname,
+				   int depth, void *data);
+
+/* Other Prototypes */
+extern void unflatten_device_tree(void);
+extern void early_init_devtree(void *);
+#else /* CONFIG_OF_FLATTREE */
+static inline void unflatten_device_tree(void) {}
+#endif /* CONFIG_OF_FLATTREE */
+
+#endif /* __ASSEMBLY__ */
+#endif /* _LINUX_OF_FDT_H */
diff --git a/include/linux/of_gpio.h b/include/linux/of_gpio.h
new file mode 100644
index 00000000..81733d12
--- /dev/null
+++ b/include/linux/of_gpio.h
@@ -0,0 +1,158 @@
+/*
+ * OF helpers for the GPIO API
+ *
+ * Copyright (c) 2007-2008  MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __LINUX_OF_GPIO_H
+#define __LINUX_OF_GPIO_H
+
+#include <linux/compiler.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+
+struct device_node;
+
+/*
+ * This is Linux-specific flags. By default controllers' and Linux' mapping
+ * match, but GPIO controllers are free to translate their own flags to
+ * Linux-specific in their .xlate callback. Though, 1:1 mapping is recommended.
+ */
+enum of_gpio_flags {
+	OF_GPIO_ACTIVE_LOW = 0x1,
+};
+
+#ifdef CONFIG_OF_GPIO
+
+/*
+ * OF GPIO chip for memory mapped banks
+ */
+struct of_mm_gpio_chip {
+	struct gpio_chip gc;
+	void (*save_regs)(struct of_mm_gpio_chip *mm_gc);
+	void __iomem *regs;
+};
+
+static inline struct of_mm_gpio_chip *to_of_mm_gpio_chip(struct gpio_chip *gc)
+{
+	return container_of(gc, struct of_mm_gpio_chip, gc);
+}
+
+extern int of_get_named_gpio_flags(struct device_node *np,
+		const char *list_name, int index, enum of_gpio_flags *flags);
+
+extern unsigned int of_gpio_named_count(struct device_node *np,
+					const char* propname);
+
+extern int of_mm_gpiochip_add(struct device_node *np,
+			      struct of_mm_gpio_chip *mm_gc);
+
+extern void of_gpiochip_add(struct gpio_chip *gc);
+extern void of_gpiochip_remove(struct gpio_chip *gc);
+extern struct gpio_chip *of_node_to_gpiochip(struct device_node *np);
+extern int of_gpio_simple_xlate(struct gpio_chip *gc,
+				const struct of_phandle_args *gpiospec,
+				u32 *flags);
+
+#else /* CONFIG_OF_GPIO */
+
+/* Drivers may not strictly depend on the GPIO support, so let them link. */
+static inline int of_get_named_gpio_flags(struct device_node *np,
+		const char *list_name, int index, enum of_gpio_flags *flags)
+{
+	return -ENOSYS;
+}
+
+static inline unsigned int of_gpio_named_count(struct device_node *np,
+					const char* propname)
+{
+	return 0;
+}
+
+static inline int of_gpio_simple_xlate(struct gpio_chip *gc,
+				       const struct of_phandle_args *gpiospec,
+				       u32 *flags)
+{
+	return -ENOSYS;
+}
+
+static inline void of_gpiochip_add(struct gpio_chip *gc) { }
+static inline void of_gpiochip_remove(struct gpio_chip *gc) { }
+
+#endif /* CONFIG_OF_GPIO */
+
+/**
+ * of_gpio_count - Count GPIOs for a device
+ * @np:		device node to count GPIOs for
+ *
+ * The function returns the count of GPIOs specified for a node.
+ *
+ * Note that the empty GPIO specifiers counts too. For example,
+ *
+ * gpios = <0
+ *          &pio1 1 2
+ *          0
+ *          &pio2 3 4>;
+ *
+ * defines four GPIOs (so this function will return 4), two of which
+ * are not specified.
+ */
+static inline unsigned int of_gpio_count(struct device_node *np)
+{
+	return of_gpio_named_count(np, "gpios");
+}
+
+/**
+ * of_get_gpio_flags() - Get a GPIO number and flags to use with GPIO API
+ * @np:		device node to get GPIO from
+ * @index:	index of the GPIO
+ * @flags:	a flags pointer to fill in
+ *
+ * Returns GPIO number to use with Linux generic GPIO API, or one of the errno
+ * value on the error condition. If @flags is not NULL the function also fills
+ * in flags for the GPIO.
+ */
+static inline int of_get_gpio_flags(struct device_node *np, int index,
+		      enum of_gpio_flags *flags)
+{
+	return of_get_named_gpio_flags(np, "gpios", index, flags);
+}
+
+/**
+ * of_get_named_gpio() - Get a GPIO number to use with GPIO API
+ * @np:		device node to get GPIO from
+ * @propname:	Name of property containing gpio specifier(s)
+ * @index:	index of the GPIO
+ *
+ * Returns GPIO number to use with Linux generic GPIO API, or one of the errno
+ * value on the error condition.
+ */
+static inline int of_get_named_gpio(struct device_node *np,
+                                   const char *propname, int index)
+{
+	return of_get_named_gpio_flags(np, propname, index, NULL);
+}
+
+/**
+ * of_get_gpio() - Get a GPIO number to use with GPIO API
+ * @np:		device node to get GPIO from
+ * @index:	index of the GPIO
+ *
+ * Returns GPIO number to use with Linux generic GPIO API, or one of the errno
+ * value on the error condition.
+ */
+static inline int of_get_gpio(struct device_node *np, int index)
+{
+	return of_get_gpio_flags(np, index, NULL);
+}
+
+#endif /* __LINUX_OF_GPIO_H */
diff --git a/include/linux/of_i2c.h b/include/linux/of_i2c.h
new file mode 100644
index 00000000..0efe8d46
--- /dev/null
+++ b/include/linux/of_i2c.h
@@ -0,0 +1,30 @@
+/*
+ * Generic I2C API implementation for PowerPC.
+ *
+ * Copyright (c) 2008 Jochen Friedrich <jochen@scram.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __LINUX_OF_I2C_H
+#define __LINUX_OF_I2C_H
+
+#if defined(CONFIG_OF_I2C) || defined(CONFIG_OF_I2C_MODULE)
+#include <linux/i2c.h>
+
+extern void of_i2c_register_devices(struct i2c_adapter *adap);
+
+/* must call put_device() when done with returned i2c_client device */
+extern struct i2c_client *of_find_i2c_device_by_node(struct device_node *node);
+
+#else
+static inline void of_i2c_register_devices(struct i2c_adapter *adap)
+{
+	return;
+}
+#endif /* CONFIG_OF_I2C */
+
+#endif /* __LINUX_OF_I2C_H */
diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h
new file mode 100644
index 00000000..d229ad3e
--- /dev/null
+++ b/include/linux/of_irq.h
@@ -0,0 +1,80 @@
+#ifndef __OF_IRQ_H
+#define __OF_IRQ_H
+
+#if defined(CONFIG_OF)
+struct of_irq;
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/ioport.h>
+#include <linux/of.h>
+
+/*
+ * irq_of_parse_and_map() is used ba all OF enabled platforms; but SPARC
+ * implements it differently.  However, the prototype is the same for all,
+ * so declare it here regardless of the CONFIG_OF_IRQ setting.
+ */
+extern unsigned int irq_of_parse_and_map(struct device_node *node, int index);
+
+#if defined(CONFIG_OF_IRQ)
+/**
+ * of_irq - container for device_node/irq_specifier pair for an irq controller
+ * @controller: pointer to interrupt controller device tree node
+ * @size: size of interrupt specifier
+ * @specifier: array of cells @size long specifing the specific interrupt
+ *
+ * This structure is returned when an interrupt is mapped. The controller
+ * field needs to be put() after use
+ */
+#define OF_MAX_IRQ_SPEC		4 /* We handle specifiers of at most 4 cells */
+struct of_irq {
+	struct device_node *controller; /* Interrupt controller node */
+	u32 size; /* Specifier size */
+	u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */
+};
+
+typedef int (*of_irq_init_cb_t)(struct device_node *, struct device_node *);
+
+/*
+ * Workarounds only applied to 32bit powermac machines
+ */
+#define OF_IMAP_OLDWORLD_MAC	0x00000001
+#define OF_IMAP_NO_PHANDLE	0x00000002
+
+#if defined(CONFIG_PPC32) && defined(CONFIG_PPC_PMAC)
+extern unsigned int of_irq_workarounds;
+extern struct device_node *of_irq_dflt_pic;
+extern int of_irq_map_oldworld(struct device_node *device, int index,
+			       struct of_irq *out_irq);
+#else /* CONFIG_PPC32 && CONFIG_PPC_PMAC */
+#define of_irq_workarounds (0)
+#define of_irq_dflt_pic (NULL)
+static inline int of_irq_map_oldworld(struct device_node *device, int index,
+				      struct of_irq *out_irq)
+{
+	return -EINVAL;
+}
+#endif /* CONFIG_PPC32 && CONFIG_PPC_PMAC */
+
+
+extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
+			  u32 ointsize, const u32 *addr,
+			  struct of_irq *out_irq);
+extern int of_irq_map_one(struct device_node *device, int index,
+			  struct of_irq *out_irq);
+extern unsigned int irq_create_of_mapping(struct device_node *controller,
+					  const u32 *intspec,
+					  unsigned int intsize);
+extern int of_irq_to_resource(struct device_node *dev, int index,
+			      struct resource *r);
+extern int of_irq_count(struct device_node *dev);
+extern int of_irq_to_resource_table(struct device_node *dev,
+		struct resource *res, int nr_irqs);
+extern struct device_node *of_irq_find_parent(struct device_node *child);
+
+extern void of_irq_init(const struct of_device_id *matches);
+
+#endif /* CONFIG_OF_IRQ */
+#endif /* CONFIG_OF */
+#endif /* __OF_IRQ_H */
diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h
new file mode 100644
index 00000000..53b94e02
--- /dev/null
+++ b/include/linux/of_mdio.h
@@ -0,0 +1,25 @@
+/*
+ * OF helpers for the MDIO (Ethernet PHY) API
+ *
+ * Copyright (c) 2009 Secret Lab Technologies, Ltd.
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_OF_MDIO_H
+#define __LINUX_OF_MDIO_H
+
+#include <linux/phy.h>
+#include <linux/of.h>
+
+extern int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np);
+extern struct phy_device *of_phy_find_device(struct device_node *phy_np);
+extern struct phy_device *of_phy_connect(struct net_device *dev,
+					 struct device_node *phy_np,
+					 void (*hndlr)(struct net_device *),
+					 u32 flags, phy_interface_t iface);
+extern struct phy_device *of_phy_connect_fixed_link(struct net_device *dev,
+					 void (*hndlr)(struct net_device *),
+					 phy_interface_t iface);
+
+#endif /* __LINUX_OF_MDIO_H */
diff --git a/include/linux/of_mtd.h b/include/linux/of_mtd.h
new file mode 100644
index 00000000..bae1b609
--- /dev/null
+++ b/include/linux/of_mtd.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * OF helpers for mtd.
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_OF_MTD_H
+#define __LINUX_OF_NET_H
+
+#ifdef CONFIG_OF_MTD
+#include <linux/of.h>
+extern const int of_get_nand_ecc_mode(struct device_node *np);
+int of_get_nand_bus_width(struct device_node *np);
+bool of_get_nand_on_flash_bbt(struct device_node *np);
+#endif
+
+#endif /* __LINUX_OF_MTD_H */
diff --git a/include/linux/of_net.h b/include/linux/of_net.h
new file mode 100644
index 00000000..f4746418
--- /dev/null
+++ b/include/linux/of_net.h
@@ -0,0 +1,16 @@
+/*
+ * OF helpers for network devices.
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_OF_NET_H
+#define __LINUX_OF_NET_H
+
+#ifdef CONFIG_OF_NET
+#include <linux/of.h>
+extern const int of_get_phy_mode(struct device_node *np);
+extern const void *of_get_mac_address(struct device_node *np);
+#endif
+
+#endif /* __LINUX_OF_NET_H */
diff --git a/include/linux/of_pci.h b/include/linux/of_pci.h
new file mode 100644
index 00000000..f93e2170
--- /dev/null
+++ b/include/linux/of_pci.h
@@ -0,0 +1,14 @@
+#ifndef __OF_PCI_H
+#define __OF_PCI_H
+
+#include <linux/pci.h>
+
+struct pci_dev;
+struct of_irq;
+int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
+
+struct device_node;
+struct device_node *of_pci_find_child_device(struct device_node *parent,
+					     unsigned int devfn);
+
+#endif
diff --git a/include/linux/of_pdt.h b/include/linux/of_pdt.h
new file mode 100644
index 00000000..c65a18a0
--- /dev/null
+++ b/include/linux/of_pdt.h
@@ -0,0 +1,45 @@
+/*
+ * Definitions for building a device tree by calling into the
+ * Open Firmware PROM.
+ *
+ * Copyright (C) 2010  Andres Salomon <dilinger@queued.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_OF_PDT_H
+#define _LINUX_OF_PDT_H
+
+/* overridable operations for calling into the PROM */
+struct of_pdt_ops {
+	/*
+	 * buf should be 32 bytes; return 0 on success.
+	 * If prev is NULL, the first property will be returned.
+	 */
+	int (*nextprop)(phandle node, char *prev, char *buf);
+
+	/* for both functions, return proplen on success; -1 on error */
+	int (*getproplen)(phandle node, const char *prop);
+	int (*getproperty)(phandle node, const char *prop, char *buf,
+			int bufsize);
+
+	/* phandles are 0 if no child or sibling exists */
+	phandle (*getchild)(phandle parent);
+	phandle (*getsibling)(phandle node);
+
+	/* return 0 on success; fill in 'len' with number of bytes in path */
+	int (*pkg2path)(phandle node, char *buf, const int buflen, int *len);
+};
+
+extern void *prom_early_alloc(unsigned long size);
+
+/* for building the device tree */
+extern void of_pdt_build_devicetree(phandle root_node, struct of_pdt_ops *ops);
+
+extern void (*of_pdt_build_more)(struct device_node *dp,
+		struct device_node ***nextp);
+
+#endif /* _LINUX_OF_PDT_H */
diff --git a/include/linux/of_platform.h b/include/linux/of_platform.h
new file mode 100644
index 00000000..b47d2040
--- /dev/null
+++ b/include/linux/of_platform.h
@@ -0,0 +1,112 @@
+#ifndef _LINUX_OF_PLATFORM_H
+#define _LINUX_OF_PLATFORM_H
+/*
+ *    Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
+ *			 <benh@kernel.crashing.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#ifdef CONFIG_OF_DEVICE
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/pm.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+/**
+ * struct of_dev_auxdata - lookup table entry for device names & platform_data
+ * @compatible: compatible value of node to match against node
+ * @phys_addr: Start address of registers to match against node
+ * @name: Name to assign for matching nodes
+ * @platform_data: platform_data to assign for matching nodes
+ *
+ * This lookup table allows the caller of of_platform_populate() to override
+ * the names of devices when creating devices from the device tree.  The table
+ * should be terminated with an empty entry.  It also allows the platform_data
+ * pointer to be set.
+ *
+ * The reason for this functionality is that some Linux infrastructure uses
+ * the device name to look up a specific device, but the Linux-specific names
+ * are not encoded into the device tree, so the kernel needs to provide specific
+ * values.
+ *
+ * Note: Using an auxdata lookup table should be considered a last resort when
+ * converting a platform to use the DT.  Normally the automatically generated
+ * device name will not matter, and drivers should obtain data from the device
+ * node instead of from an anonymouns platform_data pointer.
+ */
+struct of_dev_auxdata {
+	char *compatible;
+	resource_size_t phys_addr;
+	char *name;
+	void *platform_data;
+};
+
+/* Macro to simplify populating a lookup table */
+#define OF_DEV_AUXDATA(_compat,_phys,_name,_pdata) \
+	{ .compatible = _compat, .phys_addr = _phys, .name = _name, \
+	  .platform_data = _pdata }
+
+/**
+ * of_platform_driver - Legacy of-aware driver for platform devices.
+ *
+ * An of_platform_driver driver is attached to a basic platform_device on
+ * the ibm ebus (ibmebus_bus_type).
+ */
+struct of_platform_driver
+{
+	int	(*probe)(struct platform_device* dev,
+			 const struct of_device_id *match);
+	int	(*remove)(struct platform_device* dev);
+
+	int	(*suspend)(struct platform_device* dev, pm_message_t state);
+	int	(*resume)(struct platform_device* dev);
+	int	(*shutdown)(struct platform_device* dev);
+
+	struct device_driver	driver;
+};
+#define	to_of_platform_driver(drv) \
+	container_of(drv,struct of_platform_driver, driver)
+
+extern const struct of_device_id of_default_bus_match_table[];
+
+/* Platform drivers register/unregister */
+extern struct platform_device *of_device_alloc(struct device_node *np,
+					 const char *bus_id,
+					 struct device *parent);
+extern struct platform_device *of_find_device_by_node(struct device_node *np);
+
+#ifdef CONFIG_OF_ADDRESS /* device reg helpers depend on OF_ADDRESS */
+/* Platform devices and busses creation */
+extern struct platform_device *of_platform_device_create(struct device_node *np,
+						   const char *bus_id,
+						   struct device *parent);
+
+extern int of_platform_bus_probe(struct device_node *root,
+				 const struct of_device_id *matches,
+				 struct device *parent);
+extern int of_platform_populate(struct device_node *root,
+				const struct of_device_id *matches,
+				const struct of_dev_auxdata *lookup,
+				struct device *parent);
+#endif /* CONFIG_OF_ADDRESS */
+
+#endif /* CONFIG_OF_DEVICE */
+
+#if !defined(CONFIG_OF_ADDRESS)
+struct of_dev_auxdata;
+static inline int of_platform_populate(struct device_node *root,
+					const struct of_device_id *matches,
+					const struct of_dev_auxdata *lookup,
+					struct device *parent)
+{
+	return -ENODEV;
+}
+#endif /* !CONFIG_OF_ADDRESS */
+
+#endif	/* _LINUX_OF_PLATFORM_H */
diff --git a/include/linux/of_spi.h b/include/linux/of_spi.h
new file mode 100644
index 00000000..9e3e70f7
--- /dev/null
+++ b/include/linux/of_spi.h
@@ -0,0 +1,23 @@
+/*
+ * OpenFirmware SPI support routines
+ * Copyright (C) 2008 Secret Lab Technologies Ltd.
+ *
+ * Support routines for deriving SPI device attachments from the device
+ * tree.
+ */
+
+#ifndef __LINUX_OF_SPI_H
+#define __LINUX_OF_SPI_H
+
+#include <linux/spi/spi.h>
+
+#if defined(CONFIG_OF_SPI) || defined(CONFIG_OF_SPI_MODULE)
+extern void of_register_spi_devices(struct spi_master *master);
+#else
+static inline void of_register_spi_devices(struct spi_master *master)
+{
+	return;
+}
+#endif /* CONFIG_OF_SPI */
+
+#endif /* __LINUX_OF_SPI */
diff --git a/include/linux/omap3isp.h b/include/linux/omap3isp.h
new file mode 100644
index 00000000..c73a34c3
--- /dev/null
+++ b/include/linux/omap3isp.h
@@ -0,0 +1,644 @@
+/*
+ * omap3isp.h
+ *
+ * TI OMAP3 ISP - User-space API
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef OMAP3_ISP_USER_H
+#define OMAP3_ISP_USER_H
+
+#include <linux/types.h>
+
+/*
+ * Private IOCTLs
+ *
+ * VIDIOC_OMAP3ISP_CCDC_CFG: Set CCDC configuration
+ * VIDIOC_OMAP3ISP_PRV_CFG: Set preview engine configuration
+ * VIDIOC_OMAP3ISP_AEWB_CFG: Set AEWB module configuration
+ * VIDIOC_OMAP3ISP_HIST_CFG: Set histogram module configuration
+ * VIDIOC_OMAP3ISP_AF_CFG: Set auto-focus module configuration
+ * VIDIOC_OMAP3ISP_STAT_REQ: Read statistics (AEWB/AF/histogram) data
+ * VIDIOC_OMAP3ISP_STAT_EN: Enable/disable a statistics module
+ */
+
+#define VIDIOC_OMAP3ISP_CCDC_CFG \
+	_IOWR('V', BASE_VIDIOC_PRIVATE + 1, struct omap3isp_ccdc_update_config)
+#define VIDIOC_OMAP3ISP_PRV_CFG \
+	_IOWR('V', BASE_VIDIOC_PRIVATE + 2, struct omap3isp_prev_update_config)
+#define VIDIOC_OMAP3ISP_AEWB_CFG \
+	_IOWR('V', BASE_VIDIOC_PRIVATE + 3, struct omap3isp_h3a_aewb_config)
+#define VIDIOC_OMAP3ISP_HIST_CFG \
+	_IOWR('V', BASE_VIDIOC_PRIVATE + 4, struct omap3isp_hist_config)
+#define VIDIOC_OMAP3ISP_AF_CFG \
+	_IOWR('V', BASE_VIDIOC_PRIVATE + 5, struct omap3isp_h3a_af_config)
+#define VIDIOC_OMAP3ISP_STAT_REQ \
+	_IOWR('V', BASE_VIDIOC_PRIVATE + 6, struct omap3isp_stat_data)
+#define VIDIOC_OMAP3ISP_STAT_EN \
+	_IOWR('V', BASE_VIDIOC_PRIVATE + 7, unsigned long)
+
+/*
+ * Events
+ *
+ * V4L2_EVENT_OMAP3ISP_AEWB: AEWB statistics data ready
+ * V4L2_EVENT_OMAP3ISP_AF: AF statistics data ready
+ * V4L2_EVENT_OMAP3ISP_HIST: Histogram statistics data ready
+ */
+
+#define V4L2_EVENT_OMAP3ISP_CLASS	(V4L2_EVENT_PRIVATE_START | 0x100)
+#define V4L2_EVENT_OMAP3ISP_AEWB	(V4L2_EVENT_OMAP3ISP_CLASS | 0x1)
+#define V4L2_EVENT_OMAP3ISP_AF		(V4L2_EVENT_OMAP3ISP_CLASS | 0x2)
+#define V4L2_EVENT_OMAP3ISP_HIST	(V4L2_EVENT_OMAP3ISP_CLASS | 0x3)
+
+struct omap3isp_stat_event_status {
+	__u32 frame_number;
+	__u16 config_counter;
+	__u8 buf_err;
+};
+
+/* AE/AWB related structures and flags*/
+
+/* H3A Range Constants */
+#define OMAP3ISP_AEWB_MAX_SATURATION_LIM	1023
+#define OMAP3ISP_AEWB_MIN_WIN_H			2
+#define OMAP3ISP_AEWB_MAX_WIN_H			256
+#define OMAP3ISP_AEWB_MIN_WIN_W			6
+#define OMAP3ISP_AEWB_MAX_WIN_W			256
+#define OMAP3ISP_AEWB_MIN_WINVC			1
+#define OMAP3ISP_AEWB_MIN_WINHC			1
+#define OMAP3ISP_AEWB_MAX_WINVC			128
+#define OMAP3ISP_AEWB_MAX_WINHC			36
+#define OMAP3ISP_AEWB_MAX_WINSTART		4095
+#define OMAP3ISP_AEWB_MIN_SUB_INC		2
+#define OMAP3ISP_AEWB_MAX_SUB_INC		32
+#define OMAP3ISP_AEWB_MAX_BUF_SIZE		83600
+
+#define OMAP3ISP_AF_IIRSH_MIN			0
+#define OMAP3ISP_AF_IIRSH_MAX			4095
+#define OMAP3ISP_AF_PAXEL_HORIZONTAL_COUNT_MIN	1
+#define OMAP3ISP_AF_PAXEL_HORIZONTAL_COUNT_MAX	36
+#define OMAP3ISP_AF_PAXEL_VERTICAL_COUNT_MIN	1
+#define OMAP3ISP_AF_PAXEL_VERTICAL_COUNT_MAX	128
+#define OMAP3ISP_AF_PAXEL_INCREMENT_MIN		2
+#define OMAP3ISP_AF_PAXEL_INCREMENT_MAX		32
+#define OMAP3ISP_AF_PAXEL_HEIGHT_MIN		2
+#define OMAP3ISP_AF_PAXEL_HEIGHT_MAX		256
+#define OMAP3ISP_AF_PAXEL_WIDTH_MIN		16
+#define OMAP3ISP_AF_PAXEL_WIDTH_MAX		256
+#define OMAP3ISP_AF_PAXEL_HZSTART_MIN		1
+#define OMAP3ISP_AF_PAXEL_HZSTART_MAX		4095
+#define OMAP3ISP_AF_PAXEL_VTSTART_MIN		0
+#define OMAP3ISP_AF_PAXEL_VTSTART_MAX		4095
+#define OMAP3ISP_AF_THRESHOLD_MAX		255
+#define OMAP3ISP_AF_COEF_MAX			4095
+#define OMAP3ISP_AF_PAXEL_SIZE			48
+#define OMAP3ISP_AF_MAX_BUF_SIZE		221184
+
+/**
+ * struct omap3isp_h3a_aewb_config - AE AWB configuration reset values
+ * saturation_limit: Saturation limit.
+ * @win_height: Window Height. Range 2 - 256, even values only.
+ * @win_width: Window Width. Range 6 - 256, even values only.
+ * @ver_win_count: Vertical Window Count. Range 1 - 128.
+ * @hor_win_count: Horizontal Window Count. Range 1 - 36.
+ * @ver_win_start: Vertical Window Start. Range 0 - 4095.
+ * @hor_win_start: Horizontal Window Start. Range 0 - 4095.
+ * @blk_ver_win_start: Black Vertical Windows Start. Range 0 - 4095.
+ * @blk_win_height: Black Window Height. Range 2 - 256, even values only.
+ * @subsample_ver_inc: Subsample Vertical points increment Range 2 - 32, even
+ *                     values only.
+ * @subsample_hor_inc: Subsample Horizontal points increment Range 2 - 32, even
+ *                     values only.
+ * @alaw_enable: AEW ALAW EN flag.
+ */
+struct omap3isp_h3a_aewb_config {
+	/*
+	 * Common fields.
+	 * They should be the first ones and must be in the same order as in
+	 * ispstat_generic_config struct.
+	 */
+	__u32 buf_size;
+	__u16 config_counter;
+
+	/* Private fields */
+	__u16 saturation_limit;
+	__u16 win_height;
+	__u16 win_width;
+	__u16 ver_win_count;
+	__u16 hor_win_count;
+	__u16 ver_win_start;
+	__u16 hor_win_start;
+	__u16 blk_ver_win_start;
+	__u16 blk_win_height;
+	__u16 subsample_ver_inc;
+	__u16 subsample_hor_inc;
+	__u8 alaw_enable;
+};
+
+/**
+ * struct omap3isp_stat_data - Statistic data sent to or received from user
+ * @ts: Timestamp of returned framestats.
+ * @buf: Pointer to pass to user.
+ * @frame_number: Frame number of requested stats.
+ * @cur_frame: Current frame number being processed.
+ * @config_counter: Number of the configuration associated with the data.
+ */
+struct omap3isp_stat_data {
+	struct timeval ts;
+	void __user *buf;
+	__u32 buf_size;
+	__u16 frame_number;
+	__u16 cur_frame;
+	__u16 config_counter;
+};
+
+
+/* Histogram related structs */
+
+/* Flags for number of bins */
+#define OMAP3ISP_HIST_BINS_32		0
+#define OMAP3ISP_HIST_BINS_64		1
+#define OMAP3ISP_HIST_BINS_128		2
+#define OMAP3ISP_HIST_BINS_256		3
+
+/* Number of bins * 4 colors * 4-bytes word */
+#define OMAP3ISP_HIST_MEM_SIZE_BINS(n)	((1 << ((n)+5))*4*4)
+
+#define OMAP3ISP_HIST_MEM_SIZE		1024
+#define OMAP3ISP_HIST_MIN_REGIONS	1
+#define OMAP3ISP_HIST_MAX_REGIONS	4
+#define OMAP3ISP_HIST_MAX_WB_GAIN	255
+#define OMAP3ISP_HIST_MIN_WB_GAIN	0
+#define OMAP3ISP_HIST_MAX_BIT_WIDTH	14
+#define OMAP3ISP_HIST_MIN_BIT_WIDTH	8
+#define OMAP3ISP_HIST_MAX_WG		4
+#define OMAP3ISP_HIST_MAX_BUF_SIZE	4096
+
+/* Source */
+#define OMAP3ISP_HIST_SOURCE_CCDC	0
+#define OMAP3ISP_HIST_SOURCE_MEM	1
+
+/* CFA pattern */
+#define OMAP3ISP_HIST_CFA_BAYER		0
+#define OMAP3ISP_HIST_CFA_FOVEONX3	1
+
+struct omap3isp_hist_region {
+	__u16 h_start;
+	__u16 h_end;
+	__u16 v_start;
+	__u16 v_end;
+};
+
+struct omap3isp_hist_config {
+	/*
+	 * Common fields.
+	 * They should be the first ones and must be in the same order as in
+	 * ispstat_generic_config struct.
+	 */
+	__u32 buf_size;
+	__u16 config_counter;
+
+	__u8 num_acc_frames;	/* Num of image frames to be processed and
+				   accumulated for each histogram frame */
+	__u16 hist_bins;	/* number of bins: 32, 64, 128, or 256 */
+	__u8 cfa;		/* BAYER or FOVEON X3 */
+	__u8 wg[OMAP3ISP_HIST_MAX_WG];	/* White Balance Gain */
+	__u8 num_regions;	/* number of regions to be configured */
+	struct omap3isp_hist_region region[OMAP3ISP_HIST_MAX_REGIONS];
+};
+
+/* Auto Focus related structs */
+
+#define OMAP3ISP_AF_NUM_COEF		11
+
+enum omap3isp_h3a_af_fvmode {
+	OMAP3ISP_AF_MODE_SUMMED = 0,
+	OMAP3ISP_AF_MODE_PEAK = 1
+};
+
+/* Red, Green, and blue pixel location in the AF windows */
+enum omap3isp_h3a_af_rgbpos {
+	OMAP3ISP_AF_GR_GB_BAYER = 0,	/* GR and GB as Bayer pattern */
+	OMAP3ISP_AF_RG_GB_BAYER = 1,	/* RG and GB as Bayer pattern */
+	OMAP3ISP_AF_GR_BG_BAYER = 2,	/* GR and BG as Bayer pattern */
+	OMAP3ISP_AF_RG_BG_BAYER = 3,	/* RG and BG as Bayer pattern */
+	OMAP3ISP_AF_GG_RB_CUSTOM = 4,	/* GG and RB as custom pattern */
+	OMAP3ISP_AF_RB_GG_CUSTOM = 5	/* RB and GG as custom pattern */
+};
+
+/* Contains the information regarding the Horizontal Median Filter */
+struct omap3isp_h3a_af_hmf {
+	__u8 enable;	/* Status of Horizontal Median Filter */
+	__u8 threshold;	/* Threshold Value for Horizontal Median Filter */
+};
+
+/* Contains the information regarding the IIR Filters */
+struct omap3isp_h3a_af_iir {
+	__u16 h_start;			/* IIR horizontal start */
+	__u16 coeff_set0[OMAP3ISP_AF_NUM_COEF];	/* Filter coefficient, set 0 */
+	__u16 coeff_set1[OMAP3ISP_AF_NUM_COEF];	/* Filter coefficient, set 1 */
+};
+
+/* Contains the information regarding the Paxels Structure in AF Engine */
+struct omap3isp_h3a_af_paxel {
+	__u16 h_start;	/* Horizontal Start Position */
+	__u16 v_start;	/* Vertical Start Position */
+	__u8 width;	/* Width of the Paxel */
+	__u8 height;	/* Height of the Paxel */
+	__u8 h_cnt;	/* Horizontal Count */
+	__u8 v_cnt;	/* vertical Count */
+	__u8 line_inc;	/* Line Increment */
+};
+
+/* Contains the parameters required for hardware set up of AF Engine */
+struct omap3isp_h3a_af_config {
+	/*
+	 * Common fields.
+	 * They should be the first ones and must be in the same order as in
+	 * ispstat_generic_config struct.
+	 */
+	__u32 buf_size;
+	__u16 config_counter;
+
+	struct omap3isp_h3a_af_hmf hmf;		/* HMF configurations */
+	struct omap3isp_h3a_af_iir iir;		/* IIR filter configurations */
+	struct omap3isp_h3a_af_paxel paxel;	/* Paxel parameters */
+	enum omap3isp_h3a_af_rgbpos rgb_pos;	/* RGB Positions */
+	enum omap3isp_h3a_af_fvmode fvmode;	/* Accumulator mode */
+	__u8 alaw_enable;			/* AF ALAW status */
+};
+
+/* ISP CCDC structs */
+
+/* Abstraction layer CCDC configurations */
+#define OMAP3ISP_CCDC_ALAW		(1 << 0)
+#define OMAP3ISP_CCDC_LPF		(1 << 1)
+#define OMAP3ISP_CCDC_BLCLAMP		(1 << 2)
+#define OMAP3ISP_CCDC_BCOMP		(1 << 3)
+#define OMAP3ISP_CCDC_FPC		(1 << 4)
+#define OMAP3ISP_CCDC_CULL		(1 << 5)
+#define OMAP3ISP_CCDC_CONFIG_LSC	(1 << 7)
+#define OMAP3ISP_CCDC_TBL_LSC		(1 << 8)
+
+#define OMAP3ISP_RGB_MAX		3
+
+/* Enumeration constants for Alaw input width */
+enum omap3isp_alaw_ipwidth {
+	OMAP3ISP_ALAW_BIT12_3 = 0x3,
+	OMAP3ISP_ALAW_BIT11_2 = 0x4,
+	OMAP3ISP_ALAW_BIT10_1 = 0x5,
+	OMAP3ISP_ALAW_BIT9_0 = 0x6
+};
+
+/**
+ * struct omap3isp_ccdc_lsc_config - LSC configuration
+ * @offset: Table Offset of the gain table.
+ * @gain_mode_n: Vertical dimension of a paxel in LSC configuration.
+ * @gain_mode_m: Horizontal dimension of a paxel in LSC configuration.
+ * @gain_format: Gain table format.
+ * @fmtsph: Start pixel horizontal from start of the HS sync pulse.
+ * @fmtlnh: Number of pixels in horizontal direction to use for the data
+ *          reformatter.
+ * @fmtslv: Start line from start of VS sync pulse for the data reformatter.
+ * @fmtlnv: Number of lines in vertical direction for the data reformatter.
+ * @initial_x: X position, in pixels, of the first active pixel in reference
+ *             to the first active paxel. Must be an even number.
+ * @initial_y: Y position, in pixels, of the first active pixel in reference
+ *             to the first active paxel. Must be an even number.
+ * @size: Size of LSC gain table. Filled when loaded from userspace.
+ */
+struct omap3isp_ccdc_lsc_config {
+	__u16 offset;
+	__u8 gain_mode_n;
+	__u8 gain_mode_m;
+	__u8 gain_format;
+	__u16 fmtsph;
+	__u16 fmtlnh;
+	__u16 fmtslv;
+	__u16 fmtlnv;
+	__u8 initial_x;
+	__u8 initial_y;
+	__u32 size;
+};
+
+/**
+ * struct omap3isp_ccdc_bclamp - Optical & Digital black clamp subtract
+ * @obgain: Optical black average gain.
+ * @obstpixel: Start Pixel w.r.t. HS pulse in Optical black sample.
+ * @oblines: Optical Black Sample lines.
+ * @oblen: Optical Black Sample Length.
+ * @dcsubval: Digital Black Clamp subtract value.
+ */
+struct omap3isp_ccdc_bclamp {
+	__u8 obgain;
+	__u8 obstpixel;
+	__u8 oblines;
+	__u8 oblen;
+	__u16 dcsubval;
+};
+
+/**
+ * struct omap3isp_ccdc_fpc - Faulty Pixels Correction
+ * @fpnum: Number of faulty pixels to be corrected in the frame.
+ * @fpcaddr: Memory address of the FPC Table
+ */
+struct omap3isp_ccdc_fpc {
+	__u16 fpnum;
+	__u32 fpcaddr;
+};
+
+/**
+ * struct omap3isp_ccdc_blcomp - Black Level Compensation parameters
+ * @b_mg: B/Mg pixels. 2's complement. -128 to +127.
+ * @gb_g: Gb/G pixels. 2's complement. -128 to +127.
+ * @gr_cy: Gr/Cy pixels. 2's complement. -128 to +127.
+ * @r_ye: R/Ye pixels. 2's complement. -128 to +127.
+ */
+struct omap3isp_ccdc_blcomp {
+	__u8 b_mg;
+	__u8 gb_g;
+	__u8 gr_cy;
+	__u8 r_ye;
+};
+
+/**
+ * omap3isp_ccdc_culling - Culling parameters
+ * @v_pattern: Vertical culling pattern.
+ * @h_odd: Horizontal Culling pattern for odd lines.
+ * @h_even: Horizontal Culling pattern for even lines.
+ */
+struct omap3isp_ccdc_culling {
+	__u8 v_pattern;
+	__u16 h_odd;
+	__u16 h_even;
+};
+
+/**
+ * omap3isp_ccdc_update_config - CCDC configuration
+ * @update: Specifies which CCDC registers should be updated.
+ * @flag: Specifies which CCDC functions should be enabled.
+ * @alawip: Enable/Disable A-Law compression.
+ * @bclamp: Black clamp control register.
+ * @blcomp: Black level compensation value for RGrGbB Pixels. 2's complement.
+ * @fpc: Number of faulty pixels corrected in the frame, address of FPC table.
+ * @cull: Cull control register.
+ * @lsc: Pointer to LSC gain table.
+ */
+struct omap3isp_ccdc_update_config {
+	__u16 update;
+	__u16 flag;
+	enum omap3isp_alaw_ipwidth alawip;
+	struct omap3isp_ccdc_bclamp __user *bclamp;
+	struct omap3isp_ccdc_blcomp __user *blcomp;
+	struct omap3isp_ccdc_fpc __user *fpc;
+	struct omap3isp_ccdc_lsc_config __user *lsc_cfg;
+	struct omap3isp_ccdc_culling __user *cull;
+	__u8 __user *lsc;
+};
+
+/* Preview configurations */
+#define OMAP3ISP_PREV_LUMAENH		(1 << 0)
+#define OMAP3ISP_PREV_INVALAW		(1 << 1)
+#define OMAP3ISP_PREV_HRZ_MED		(1 << 2)
+#define OMAP3ISP_PREV_CFA		(1 << 3)
+#define OMAP3ISP_PREV_CHROMA_SUPP	(1 << 4)
+#define OMAP3ISP_PREV_WB		(1 << 5)
+#define OMAP3ISP_PREV_BLKADJ		(1 << 6)
+#define OMAP3ISP_PREV_RGB2RGB		(1 << 7)
+#define OMAP3ISP_PREV_COLOR_CONV	(1 << 8)
+#define OMAP3ISP_PREV_YC_LIMIT		(1 << 9)
+#define OMAP3ISP_PREV_DEFECT_COR	(1 << 10)
+#define OMAP3ISP_PREV_GAMMABYPASS	(1 << 11)
+#define OMAP3ISP_PREV_DRK_FRM_CAPTURE	(1 << 12)
+#define OMAP3ISP_PREV_DRK_FRM_SUBTRACT	(1 << 13)
+#define OMAP3ISP_PREV_LENS_SHADING	(1 << 14)
+#define OMAP3ISP_PREV_NF		(1 << 15)
+#define OMAP3ISP_PREV_GAMMA		(1 << 16)
+
+#define OMAP3ISP_PREV_NF_TBL_SIZE	64
+#define OMAP3ISP_PREV_CFA_TBL_SIZE	576
+#define OMAP3ISP_PREV_GAMMA_TBL_SIZE	1024
+#define OMAP3ISP_PREV_YENH_TBL_SIZE	128
+
+#define OMAP3ISP_PREV_DETECT_CORRECT_CHANNELS	4
+
+/**
+ * struct omap3isp_prev_hmed - Horizontal Median Filter
+ * @odddist: Distance between consecutive pixels of same color in the odd line.
+ * @evendist: Distance between consecutive pixels of same color in the even
+ *            line.
+ * @thres: Horizontal median filter threshold.
+ */
+struct omap3isp_prev_hmed {
+	__u8 odddist;
+	__u8 evendist;
+	__u8 thres;
+};
+
+/*
+ * Enumeration for CFA Formats supported by preview
+ */
+enum omap3isp_cfa_fmt {
+	OMAP3ISP_CFAFMT_BAYER,
+	OMAP3ISP_CFAFMT_SONYVGA,
+	OMAP3ISP_CFAFMT_RGBFOVEON,
+	OMAP3ISP_CFAFMT_DNSPL,
+	OMAP3ISP_CFAFMT_HONEYCOMB,
+	OMAP3ISP_CFAFMT_RRGGBBFOVEON
+};
+
+/**
+ * struct omap3isp_prev_cfa - CFA Interpolation
+ * @format: CFA Format Enum value supported by preview.
+ * @gradthrs_vert: CFA Gradient Threshold - Vertical.
+ * @gradthrs_horz: CFA Gradient Threshold - Horizontal.
+ * @table: Pointer to the CFA table.
+ */
+struct omap3isp_prev_cfa {
+	enum omap3isp_cfa_fmt format;
+	__u8 gradthrs_vert;
+	__u8 gradthrs_horz;
+	__u32 table[OMAP3ISP_PREV_CFA_TBL_SIZE];
+};
+
+/**
+ * struct omap3isp_prev_csup - Chrominance Suppression
+ * @gain: Gain.
+ * @thres: Threshold.
+ * @hypf_en: Flag to enable/disable the High Pass Filter.
+ */
+struct omap3isp_prev_csup {
+	__u8 gain;
+	__u8 thres;
+	__u8 hypf_en;
+};
+
+/**
+ * struct omap3isp_prev_wbal - White Balance
+ * @dgain: Digital gain (U10Q8).
+ * @coef3: White balance gain - COEF 3 (U8Q5).
+ * @coef2: White balance gain - COEF 2 (U8Q5).
+ * @coef1: White balance gain - COEF 1 (U8Q5).
+ * @coef0: White balance gain - COEF 0 (U8Q5).
+ */
+struct omap3isp_prev_wbal {
+	__u16 dgain;
+	__u8 coef3;
+	__u8 coef2;
+	__u8 coef1;
+	__u8 coef0;
+};
+
+/**
+ * struct omap3isp_prev_blkadj - Black Level Adjustment
+ * @red: Black level offset adjustment for Red in 2's complement format
+ * @green: Black level offset adjustment for Green in 2's complement format
+ * @blue: Black level offset adjustment for Blue in 2's complement format
+ */
+struct omap3isp_prev_blkadj {
+	/*Black level offset adjustment for Red in 2's complement format */
+	__u8 red;
+	/*Black level offset adjustment for Green in 2's complement format */
+	__u8 green;
+	/* Black level offset adjustment for Blue in 2's complement format */
+	__u8 blue;
+};
+
+/**
+ * struct omap3isp_prev_rgbtorgb - RGB to RGB Blending
+ * @matrix: Blending values(S12Q8 format)
+ *              [RR] [GR] [BR]
+ *              [RG] [GG] [BG]
+ *              [RB] [GB] [BB]
+ * @offset: Blending offset value for R,G,B in 2's complement integer format.
+ */
+struct omap3isp_prev_rgbtorgb {
+	__u16 matrix[OMAP3ISP_RGB_MAX][OMAP3ISP_RGB_MAX];
+	__u16 offset[OMAP3ISP_RGB_MAX];
+};
+
+/**
+ * struct omap3isp_prev_csc - Color Space Conversion from RGB-YCbYCr
+ * @matrix: Color space conversion coefficients(S10Q8)
+ *              [CSCRY]  [CSCGY]  [CSCBY]
+ *              [CSCRCB] [CSCGCB] [CSCBCB]
+ *              [CSCRCR] [CSCGCR] [CSCBCR]
+ * @offset: CSC offset values for Y offset, CB offset and CR offset respectively
+ */
+struct omap3isp_prev_csc {
+	__u16 matrix[OMAP3ISP_RGB_MAX][OMAP3ISP_RGB_MAX];
+	__s16 offset[OMAP3ISP_RGB_MAX];
+};
+
+/**
+ * struct omap3isp_prev_yclimit - Y, C Value Limit
+ * @minC: Minimum C value
+ * @maxC: Maximum C value
+ * @minY: Minimum Y value
+ * @maxY: Maximum Y value
+ */
+struct omap3isp_prev_yclimit {
+	__u8 minC;
+	__u8 maxC;
+	__u8 minY;
+	__u8 maxY;
+};
+
+/**
+ * struct omap3isp_prev_dcor - Defect correction
+ * @couplet_mode_en: Flag to enable or disable the couplet dc Correction in NF
+ * @detect_correct: Thresholds for correction bit 0:10 detect 16:25 correct
+ */
+struct omap3isp_prev_dcor {
+	__u8 couplet_mode_en;
+	__u32 detect_correct[OMAP3ISP_PREV_DETECT_CORRECT_CHANNELS];
+};
+
+/**
+ * struct omap3isp_prev_nf - Noise Filter
+ * @spread: Spread value to be used in Noise Filter
+ * @table: Pointer to the Noise Filter table
+ */
+struct omap3isp_prev_nf {
+	__u8 spread;
+	__u32 table[OMAP3ISP_PREV_NF_TBL_SIZE];
+};
+
+/**
+ * struct omap3isp_prev_gtables - Gamma correction tables
+ * @red: Array for red gamma table.
+ * @green: Array for green gamma table.
+ * @blue: Array for blue gamma table.
+ */
+struct omap3isp_prev_gtables {
+	__u32 red[OMAP3ISP_PREV_GAMMA_TBL_SIZE];
+	__u32 green[OMAP3ISP_PREV_GAMMA_TBL_SIZE];
+	__u32 blue[OMAP3ISP_PREV_GAMMA_TBL_SIZE];
+};
+
+/**
+ * struct omap3isp_prev_luma - Luma enhancement
+ * @table: Array for luma enhancement table.
+ */
+struct omap3isp_prev_luma {
+	__u32 table[OMAP3ISP_PREV_YENH_TBL_SIZE];
+};
+
+/**
+ * struct omap3isp_prev_update_config - Preview engine configuration (user)
+ * @update: Specifies which ISP Preview registers should be updated.
+ * @flag: Specifies which ISP Preview functions should be enabled.
+ * @shading_shift: 3bit value of shift used in shading compensation.
+ * @luma: Pointer to luma enhancement structure.
+ * @hmed: Pointer to structure containing the odd and even distance.
+ *        between the pixels in the image along with the filter threshold.
+ * @cfa: Pointer to structure containing the CFA interpolation table, CFA.
+ *       format in the image, vertical and horizontal gradient threshold.
+ * @csup: Pointer to Structure for Chrominance Suppression coefficients.
+ * @wbal: Pointer to structure for White Balance.
+ * @blkadj: Pointer to structure for Black Adjustment.
+ * @rgb2rgb: Pointer to structure for RGB to RGB Blending.
+ * @csc: Pointer to structure for Color Space Conversion from RGB-YCbYCr.
+ * @yclimit: Pointer to structure for Y, C Value Limit.
+ * @dcor: Pointer to structure for defect correction.
+ * @nf: Pointer to structure for Noise Filter
+ * @gamma: Pointer to gamma structure.
+ */
+struct omap3isp_prev_update_config {
+	__u32 update;
+	__u32 flag;
+	__u32 shading_shift;
+	struct omap3isp_prev_luma __user *luma;
+	struct omap3isp_prev_hmed __user *hmed;
+	struct omap3isp_prev_cfa __user *cfa;
+	struct omap3isp_prev_csup __user *csup;
+	struct omap3isp_prev_wbal __user *wbal;
+	struct omap3isp_prev_blkadj __user *blkadj;
+	struct omap3isp_prev_rgbtorgb __user *rgb2rgb;
+	struct omap3isp_prev_csc __user *csc;
+	struct omap3isp_prev_yclimit __user *yclimit;
+	struct omap3isp_prev_dcor __user *dcor;
+	struct omap3isp_prev_nf __user *nf;
+	struct omap3isp_prev_gtables __user *gamma;
+};
+
+#endif	/* OMAP3_ISP_USER_H */
diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h
new file mode 100644
index 00000000..4ff57e81
--- /dev/null
+++ b/include/linux/omapfb.h
@@ -0,0 +1,233 @@
+/*
+ * File: include/linux/omapfb.h
+ *
+ * Framebuffer driver for TI OMAP boards
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __LINUX_OMAPFB_H__
+#define __LINUX_OMAPFB_H__
+
+#include <linux/fb.h>
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/* IOCTL commands. */
+
+#define OMAP_IOW(num, dtype)	_IOW('O', num, dtype)
+#define OMAP_IOR(num, dtype)	_IOR('O', num, dtype)
+#define OMAP_IOWR(num, dtype)	_IOWR('O', num, dtype)
+#define OMAP_IO(num)		_IO('O', num)
+
+#define OMAPFB_MIRROR		OMAP_IOW(31, int)
+#define OMAPFB_SYNC_GFX		OMAP_IO(37)
+#define OMAPFB_VSYNC		OMAP_IO(38)
+#define OMAPFB_SET_UPDATE_MODE	OMAP_IOW(40, int)
+#define OMAPFB_GET_CAPS		OMAP_IOR(42, struct omapfb_caps)
+#define OMAPFB_GET_UPDATE_MODE	OMAP_IOW(43, int)
+#define OMAPFB_LCD_TEST		OMAP_IOW(45, int)
+#define OMAPFB_CTRL_TEST	OMAP_IOW(46, int)
+#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
+#define OMAPFB_SET_COLOR_KEY	OMAP_IOW(50, struct omapfb_color_key)
+#define OMAPFB_GET_COLOR_KEY	OMAP_IOW(51, struct omapfb_color_key)
+#define OMAPFB_SETUP_PLANE	OMAP_IOW(52, struct omapfb_plane_info)
+#define OMAPFB_QUERY_PLANE	OMAP_IOW(53, struct omapfb_plane_info)
+#define OMAPFB_UPDATE_WINDOW	OMAP_IOW(54, struct omapfb_update_window)
+#define OMAPFB_SETUP_MEM	OMAP_IOW(55, struct omapfb_mem_info)
+#define OMAPFB_QUERY_MEM	OMAP_IOW(56, struct omapfb_mem_info)
+#define OMAPFB_WAITFORVSYNC	OMAP_IO(57)
+#define OMAPFB_MEMORY_READ	OMAP_IOR(58, struct omapfb_memory_read)
+#define OMAPFB_GET_OVERLAY_COLORMODE OMAP_IOR(59, struct omapfb_ovl_colormode)
+#define OMAPFB_WAITFORGO	OMAP_IO(60)
+#define OMAPFB_GET_VRAM_INFO	OMAP_IOR(61, struct omapfb_vram_info)
+#define OMAPFB_SET_TEARSYNC	OMAP_IOW(62, struct omapfb_tearsync_info)
+#define OMAPFB_GET_DISPLAY_INFO	OMAP_IOR(63, struct omapfb_display_info)
+
+#define OMAPFB_CAPS_GENERIC_MASK	0x00000fff
+#define OMAPFB_CAPS_LCDC_MASK		0x00fff000
+#define OMAPFB_CAPS_PANEL_MASK		0xff000000
+
+#define OMAPFB_CAPS_MANUAL_UPDATE	0x00001000
+#define OMAPFB_CAPS_TEARSYNC		0x00002000
+#define OMAPFB_CAPS_PLANE_RELOCATE_MEM	0x00004000
+#define OMAPFB_CAPS_PLANE_SCALE		0x00008000
+#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE	0x00010000
+#define OMAPFB_CAPS_WINDOW_SCALE	0x00020000
+#define OMAPFB_CAPS_WINDOW_OVERLAY	0x00040000
+#define OMAPFB_CAPS_WINDOW_ROTATE	0x00080000
+#define OMAPFB_CAPS_SET_BACKLIGHT	0x01000000
+
+/* Values from DSP must map to lower 16-bits */
+#define OMAPFB_FORMAT_MASK		0x00ff
+#define OMAPFB_FORMAT_FLAG_DOUBLE	0x0100
+#define OMAPFB_FORMAT_FLAG_TEARSYNC	0x0200
+#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC	0x0400
+#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY	0x0800
+#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY	0x1000
+
+#define OMAPFB_MEMTYPE_SDRAM		0
+#define OMAPFB_MEMTYPE_SRAM		1
+#define OMAPFB_MEMTYPE_MAX		1
+
+#define OMAPFB_MEM_IDX_ENABLED	0x80
+#define OMAPFB_MEM_IDX_MASK	0x7f
+
+enum omapfb_color_format {
+	OMAPFB_COLOR_RGB565 = 0,
+	OMAPFB_COLOR_YUV422,
+	OMAPFB_COLOR_YUV420,
+	OMAPFB_COLOR_CLUT_8BPP,
+	OMAPFB_COLOR_CLUT_4BPP,
+	OMAPFB_COLOR_CLUT_2BPP,
+	OMAPFB_COLOR_CLUT_1BPP,
+	OMAPFB_COLOR_RGB444,
+	OMAPFB_COLOR_YUY422,
+
+	OMAPFB_COLOR_ARGB16,
+	OMAPFB_COLOR_RGB24U,	/* RGB24, 32-bit container */
+	OMAPFB_COLOR_RGB24P,	/* RGB24, 24-bit container */
+	OMAPFB_COLOR_ARGB32,
+	OMAPFB_COLOR_RGBA32,
+	OMAPFB_COLOR_RGBX32,
+};
+
+struct omapfb_update_window {
+	__u32 x, y;
+	__u32 width, height;
+	__u32 format;
+	__u32 out_x, out_y;
+	__u32 out_width, out_height;
+	__u32 reserved[8];
+};
+
+struct omapfb_update_window_old {
+	__u32 x, y;
+	__u32 width, height;
+	__u32 format;
+};
+
+enum omapfb_plane {
+	OMAPFB_PLANE_GFX = 0,
+	OMAPFB_PLANE_VID1,
+	OMAPFB_PLANE_VID2,
+};
+
+enum omapfb_channel_out {
+	OMAPFB_CHANNEL_OUT_LCD = 0,
+	OMAPFB_CHANNEL_OUT_DIGIT,
+};
+
+struct omapfb_plane_info {
+	__u32 pos_x;
+	__u32 pos_y;
+	__u8  enabled;
+	__u8  channel_out;
+	__u8  mirror;
+	__u8  mem_idx;
+	__u32 out_width;
+	__u32 out_height;
+	__u32 reserved2[12];
+};
+
+struct omapfb_mem_info {
+	__u32 size;
+	__u8  type;
+	__u8  reserved[3];
+};
+
+struct omapfb_caps {
+	__u32 ctrl;
+	__u32 plane_color;
+	__u32 wnd_color;
+};
+
+enum omapfb_color_key_type {
+	OMAPFB_COLOR_KEY_DISABLED = 0,
+	OMAPFB_COLOR_KEY_GFX_DST,
+	OMAPFB_COLOR_KEY_VID_SRC,
+};
+
+struct omapfb_color_key {
+	__u8  channel_out;
+	__u32 background;
+	__u32 trans_key;
+	__u8  key_type;
+};
+
+enum omapfb_update_mode {
+	OMAPFB_UPDATE_DISABLED = 0,
+	OMAPFB_AUTO_UPDATE,
+	OMAPFB_MANUAL_UPDATE
+};
+
+struct omapfb_memory_read {
+	__u16 x;
+	__u16 y;
+	__u16 w;
+	__u16 h;
+	size_t buffer_size;
+	void __user *buffer;
+};
+
+struct omapfb_ovl_colormode {
+	__u8 overlay_idx;
+	__u8 mode_idx;
+	__u32 bits_per_pixel;
+	__u32 nonstd;
+	struct fb_bitfield red;
+	struct fb_bitfield green;
+	struct fb_bitfield blue;
+	struct fb_bitfield transp;
+};
+
+struct omapfb_vram_info {
+	__u32 total;
+	__u32 free;
+	__u32 largest_free_block;
+	__u32 reserved[5];
+};
+
+struct omapfb_tearsync_info {
+	__u8 enabled;
+	__u8 reserved1[3];
+	__u16 line;
+	__u16 reserved2;
+};
+
+struct omapfb_display_info {
+	__u16 xres;
+	__u16 yres;
+	__u32 width;	/* phys width of the display in micrometers */
+	__u32 height;	/* phys height of the display in micrometers */
+	__u32 reserved[5];
+};
+
+#ifdef __KERNEL__
+
+#include <plat/board.h>
+
+struct omapfb_platform_data {
+	struct omap_lcd_config		lcd;
+};
+
+void __init omapfb_set_lcd_config(const struct omap_lcd_config *config);
+
+#endif
+
+#endif /* __OMAPFB_H */
diff --git a/include/linux/oom.h b/include/linux/oom.h
new file mode 100644
index 00000000..3d764753
--- /dev/null
+++ b/include/linux/oom.h
@@ -0,0 +1,75 @@
+#ifndef __INCLUDE_LINUX_OOM_H
+#define __INCLUDE_LINUX_OOM_H
+
+/*
+ * /proc/<pid>/oom_adj is deprecated, see
+ * Documentation/feature-removal-schedule.txt.
+ *
+ * /proc/<pid>/oom_adj set to -17 protects from the oom-killer
+ */
+#define OOM_DISABLE (-17)
+/* inclusive */
+#define OOM_ADJUST_MIN (-16)
+#define OOM_ADJUST_MAX 15
+
+/*
+ * /proc/<pid>/oom_score_adj set to OOM_SCORE_ADJ_MIN disables oom killing for
+ * pid.
+ */
+#define OOM_SCORE_ADJ_MIN	(-1000)
+#define OOM_SCORE_ADJ_MAX	1000
+
+#ifdef __KERNEL__
+
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/nodemask.h>
+
+struct zonelist;
+struct notifier_block;
+struct mem_cgroup;
+struct task_struct;
+
+/*
+ * Types of limitations to the nodes from which allocations may occur
+ */
+enum oom_constraint {
+	CONSTRAINT_NONE,
+	CONSTRAINT_CPUSET,
+	CONSTRAINT_MEMORY_POLICY,
+	CONSTRAINT_MEMCG,
+};
+
+extern void compare_swap_oom_score_adj(int old_val, int new_val);
+extern int test_set_oom_score_adj(int new_val);
+
+extern unsigned int oom_badness(struct task_struct *p, struct mem_cgroup *memcg,
+			const nodemask_t *nodemask, unsigned long totalpages);
+extern int try_set_zonelist_oom(struct zonelist *zonelist, gfp_t gfp_flags);
+extern void clear_zonelist_oom(struct zonelist *zonelist, gfp_t gfp_flags);
+
+extern void out_of_memory(struct zonelist *zonelist, gfp_t gfp_mask,
+		int order, nodemask_t *mask, bool force_kill);
+extern int register_oom_notifier(struct notifier_block *nb);
+extern int unregister_oom_notifier(struct notifier_block *nb);
+
+extern bool oom_killer_disabled;
+
+static inline void oom_killer_disable(void)
+{
+	oom_killer_disabled = true;
+}
+
+static inline void oom_killer_enable(void)
+{
+	oom_killer_disabled = false;
+}
+
+extern struct task_struct *find_lock_task_mm(struct task_struct *p);
+
+/* sysctls */
+extern int sysctl_oom_dump_tasks;
+extern int sysctl_oom_kill_allocating_task;
+extern int sysctl_panic_on_oom;
+#endif /* __KERNEL__*/
+#endif /* _INCLUDE_LINUX_OOM_H */
diff --git a/include/linux/openvswitch.h b/include/linux/openvswitch.h
new file mode 100644
index 00000000..eb1efa54
--- /dev/null
+++ b/include/linux/openvswitch.h
@@ -0,0 +1,452 @@
+/*
+ * Copyright (c) 2007-2011 Nicira Networks.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ */
+
+#ifndef _LINUX_OPENVSWITCH_H
+#define _LINUX_OPENVSWITCH_H 1
+
+#include <linux/types.h>
+
+/**
+ * struct ovs_header - header for OVS Generic Netlink messages.
+ * @dp_ifindex: ifindex of local port for datapath (0 to make a request not
+ * specific to a datapath).
+ *
+ * Attributes following the header are specific to a particular OVS Generic
+ * Netlink family, but all of the OVS families use this header.
+ */
+
+struct ovs_header {
+	int dp_ifindex;
+};
+
+/* Datapaths. */
+
+#define OVS_DATAPATH_FAMILY  "ovs_datapath"
+#define OVS_DATAPATH_MCGROUP "ovs_datapath"
+#define OVS_DATAPATH_VERSION 0x1
+
+enum ovs_datapath_cmd {
+	OVS_DP_CMD_UNSPEC,
+	OVS_DP_CMD_NEW,
+	OVS_DP_CMD_DEL,
+	OVS_DP_CMD_GET,
+	OVS_DP_CMD_SET
+};
+
+/**
+ * enum ovs_datapath_attr - attributes for %OVS_DP_* commands.
+ * @OVS_DP_ATTR_NAME: Name of the network device that serves as the "local
+ * port".  This is the name of the network device whose dp_ifindex is given in
+ * the &struct ovs_header.  Always present in notifications.  Required in
+ * %OVS_DP_NEW requests.  May be used as an alternative to specifying
+ * dp_ifindex in other requests (with a dp_ifindex of 0).
+ * @OVS_DP_ATTR_UPCALL_PID: The Netlink socket in userspace that is initially
+ * set on the datapath port (for OVS_ACTION_ATTR_MISS).  Only valid on
+ * %OVS_DP_CMD_NEW requests. A value of zero indicates that upcalls should
+ * not be sent.
+ * @OVS_DP_ATTR_STATS: Statistics about packets that have passed through the
+ * datapath.  Always present in notifications.
+ *
+ * These attributes follow the &struct ovs_header within the Generic Netlink
+ * payload for %OVS_DP_* commands.
+ */
+enum ovs_datapath_attr {
+	OVS_DP_ATTR_UNSPEC,
+	OVS_DP_ATTR_NAME,       /* name of dp_ifindex netdev */
+	OVS_DP_ATTR_UPCALL_PID, /* Netlink PID to receive upcalls */
+	OVS_DP_ATTR_STATS,      /* struct ovs_dp_stats */
+	__OVS_DP_ATTR_MAX
+};
+
+#define OVS_DP_ATTR_MAX (__OVS_DP_ATTR_MAX - 1)
+
+struct ovs_dp_stats {
+	__u64 n_hit;             /* Number of flow table matches. */
+	__u64 n_missed;          /* Number of flow table misses. */
+	__u64 n_lost;            /* Number of misses not sent to userspace. */
+	__u64 n_flows;           /* Number of flows present */
+};
+
+struct ovs_vport_stats {
+	__u64   rx_packets;		/* total packets received       */
+	__u64   tx_packets;		/* total packets transmitted    */
+	__u64   rx_bytes;		/* total bytes received         */
+	__u64   tx_bytes;		/* total bytes transmitted      */
+	__u64   rx_errors;		/* bad packets received         */
+	__u64   tx_errors;		/* packet transmit problems     */
+	__u64   rx_dropped;		/* no space in linux buffers    */
+	__u64   tx_dropped;		/* no space available in linux  */
+};
+
+/* Fixed logical ports. */
+#define OVSP_LOCAL      ((__u16)0)
+
+/* Packet transfer. */
+
+#define OVS_PACKET_FAMILY "ovs_packet"
+#define OVS_PACKET_VERSION 0x1
+
+enum ovs_packet_cmd {
+	OVS_PACKET_CMD_UNSPEC,
+
+	/* Kernel-to-user notifications. */
+	OVS_PACKET_CMD_MISS,    /* Flow table miss. */
+	OVS_PACKET_CMD_ACTION,  /* OVS_ACTION_ATTR_USERSPACE action. */
+
+	/* Userspace commands. */
+	OVS_PACKET_CMD_EXECUTE  /* Apply actions to a packet. */
+};
+
+/**
+ * enum ovs_packet_attr - attributes for %OVS_PACKET_* commands.
+ * @OVS_PACKET_ATTR_PACKET: Present for all notifications.  Contains the entire
+ * packet as received, from the start of the Ethernet header onward.  For
+ * %OVS_PACKET_CMD_ACTION, %OVS_PACKET_ATTR_PACKET reflects changes made by
+ * actions preceding %OVS_ACTION_ATTR_USERSPACE, but %OVS_PACKET_ATTR_KEY is
+ * the flow key extracted from the packet as originally received.
+ * @OVS_PACKET_ATTR_KEY: Present for all notifications.  Contains the flow key
+ * extracted from the packet as nested %OVS_KEY_ATTR_* attributes.  This allows
+ * userspace to adapt its flow setup strategy by comparing its notion of the
+ * flow key against the kernel's.
+ * @OVS_PACKET_ATTR_ACTIONS: Contains actions for the packet.  Used
+ * for %OVS_PACKET_CMD_EXECUTE.  It has nested %OVS_ACTION_ATTR_* attributes.
+ * @OVS_PACKET_ATTR_USERDATA: Present for an %OVS_PACKET_CMD_ACTION
+ * notification if the %OVS_ACTION_ATTR_USERSPACE action specified an
+ * %OVS_USERSPACE_ATTR_USERDATA attribute.
+ *
+ * These attributes follow the &struct ovs_header within the Generic Netlink
+ * payload for %OVS_PACKET_* commands.
+ */
+enum ovs_packet_attr {
+	OVS_PACKET_ATTR_UNSPEC,
+	OVS_PACKET_ATTR_PACKET,      /* Packet data. */
+	OVS_PACKET_ATTR_KEY,         /* Nested OVS_KEY_ATTR_* attributes. */
+	OVS_PACKET_ATTR_ACTIONS,     /* Nested OVS_ACTION_ATTR_* attributes. */
+	OVS_PACKET_ATTR_USERDATA,    /* u64 OVS_ACTION_ATTR_USERSPACE arg. */
+	__OVS_PACKET_ATTR_MAX
+};
+
+#define OVS_PACKET_ATTR_MAX (__OVS_PACKET_ATTR_MAX - 1)
+
+/* Virtual ports. */
+
+#define OVS_VPORT_FAMILY  "ovs_vport"
+#define OVS_VPORT_MCGROUP "ovs_vport"
+#define OVS_VPORT_VERSION 0x1
+
+enum ovs_vport_cmd {
+	OVS_VPORT_CMD_UNSPEC,
+	OVS_VPORT_CMD_NEW,
+	OVS_VPORT_CMD_DEL,
+	OVS_VPORT_CMD_GET,
+	OVS_VPORT_CMD_SET
+};
+
+enum ovs_vport_type {
+	OVS_VPORT_TYPE_UNSPEC,
+	OVS_VPORT_TYPE_NETDEV,   /* network device */
+	OVS_VPORT_TYPE_INTERNAL, /* network device implemented by datapath */
+	__OVS_VPORT_TYPE_MAX
+};
+
+#define OVS_VPORT_TYPE_MAX (__OVS_VPORT_TYPE_MAX - 1)
+
+/**
+ * enum ovs_vport_attr - attributes for %OVS_VPORT_* commands.
+ * @OVS_VPORT_ATTR_PORT_NO: 32-bit port number within datapath.
+ * @OVS_VPORT_ATTR_TYPE: 32-bit %OVS_VPORT_TYPE_* constant describing the type
+ * of vport.
+ * @OVS_VPORT_ATTR_NAME: Name of vport.  For a vport based on a network device
+ * this is the name of the network device.  Maximum length %IFNAMSIZ-1 bytes
+ * plus a null terminator.
+ * @OVS_VPORT_ATTR_OPTIONS: Vport-specific configuration information.
+ * @OVS_VPORT_ATTR_UPCALL_PID: The Netlink socket in userspace that
+ * OVS_PACKET_CMD_MISS upcalls will be directed to for packets received on
+ * this port.  A value of zero indicates that upcalls should not be sent.
+ * @OVS_VPORT_ATTR_STATS: A &struct ovs_vport_stats giving statistics for
+ * packets sent or received through the vport.
+ *
+ * These attributes follow the &struct ovs_header within the Generic Netlink
+ * payload for %OVS_VPORT_* commands.
+ *
+ * For %OVS_VPORT_CMD_NEW requests, the %OVS_VPORT_ATTR_TYPE and
+ * %OVS_VPORT_ATTR_NAME attributes are required.  %OVS_VPORT_ATTR_PORT_NO is
+ * optional; if not specified a free port number is automatically selected.
+ * Whether %OVS_VPORT_ATTR_OPTIONS is required or optional depends on the type
+ * of vport.
+ * and other attributes are ignored.
+ *
+ * For other requests, if %OVS_VPORT_ATTR_NAME is specified then it is used to
+ * look up the vport to operate on; otherwise dp_idx from the &struct
+ * ovs_header plus %OVS_VPORT_ATTR_PORT_NO determine the vport.
+ */
+enum ovs_vport_attr {
+	OVS_VPORT_ATTR_UNSPEC,
+	OVS_VPORT_ATTR_PORT_NO,	/* u32 port number within datapath */
+	OVS_VPORT_ATTR_TYPE,	/* u32 OVS_VPORT_TYPE_* constant. */
+	OVS_VPORT_ATTR_NAME,	/* string name, up to IFNAMSIZ bytes long */
+	OVS_VPORT_ATTR_OPTIONS, /* nested attributes, varies by vport type */
+	OVS_VPORT_ATTR_UPCALL_PID, /* u32 Netlink PID to receive upcalls */
+	OVS_VPORT_ATTR_STATS,	/* struct ovs_vport_stats */
+	__OVS_VPORT_ATTR_MAX
+};
+
+#define OVS_VPORT_ATTR_MAX (__OVS_VPORT_ATTR_MAX - 1)
+
+/* Flows. */
+
+#define OVS_FLOW_FAMILY  "ovs_flow"
+#define OVS_FLOW_MCGROUP "ovs_flow"
+#define OVS_FLOW_VERSION 0x1
+
+enum ovs_flow_cmd {
+	OVS_FLOW_CMD_UNSPEC,
+	OVS_FLOW_CMD_NEW,
+	OVS_FLOW_CMD_DEL,
+	OVS_FLOW_CMD_GET,
+	OVS_FLOW_CMD_SET
+};
+
+struct ovs_flow_stats {
+	__u64 n_packets;         /* Number of matched packets. */
+	__u64 n_bytes;           /* Number of matched bytes. */
+};
+
+enum ovs_key_attr {
+	OVS_KEY_ATTR_UNSPEC,
+	OVS_KEY_ATTR_ENCAP,	/* Nested set of encapsulated attributes. */
+	OVS_KEY_ATTR_PRIORITY,  /* u32 skb->priority */
+	OVS_KEY_ATTR_IN_PORT,   /* u32 OVS dp port number */
+	OVS_KEY_ATTR_ETHERNET,  /* struct ovs_key_ethernet */
+	OVS_KEY_ATTR_VLAN,	/* be16 VLAN TCI */
+	OVS_KEY_ATTR_ETHERTYPE,	/* be16 Ethernet type */
+	OVS_KEY_ATTR_IPV4,      /* struct ovs_key_ipv4 */
+	OVS_KEY_ATTR_IPV6,      /* struct ovs_key_ipv6 */
+	OVS_KEY_ATTR_TCP,       /* struct ovs_key_tcp */
+	OVS_KEY_ATTR_UDP,       /* struct ovs_key_udp */
+	OVS_KEY_ATTR_ICMP,      /* struct ovs_key_icmp */
+	OVS_KEY_ATTR_ICMPV6,    /* struct ovs_key_icmpv6 */
+	OVS_KEY_ATTR_ARP,       /* struct ovs_key_arp */
+	OVS_KEY_ATTR_ND,        /* struct ovs_key_nd */
+	__OVS_KEY_ATTR_MAX
+};
+
+#define OVS_KEY_ATTR_MAX (__OVS_KEY_ATTR_MAX - 1)
+
+/**
+ * enum ovs_frag_type - IPv4 and IPv6 fragment type
+ * @OVS_FRAG_TYPE_NONE: Packet is not a fragment.
+ * @OVS_FRAG_TYPE_FIRST: Packet is a fragment with offset 0.
+ * @OVS_FRAG_TYPE_LATER: Packet is a fragment with nonzero offset.
+ *
+ * Used as the @ipv4_frag in &struct ovs_key_ipv4 and as @ipv6_frag &struct
+ * ovs_key_ipv6.
+ */
+enum ovs_frag_type {
+	OVS_FRAG_TYPE_NONE,
+	OVS_FRAG_TYPE_FIRST,
+	OVS_FRAG_TYPE_LATER,
+	__OVS_FRAG_TYPE_MAX
+};
+
+#define OVS_FRAG_TYPE_MAX (__OVS_FRAG_TYPE_MAX - 1)
+
+struct ovs_key_ethernet {
+	__u8	 eth_src[6];
+	__u8	 eth_dst[6];
+};
+
+struct ovs_key_ipv4 {
+	__be32 ipv4_src;
+	__be32 ipv4_dst;
+	__u8   ipv4_proto;
+	__u8   ipv4_tos;
+	__u8   ipv4_ttl;
+	__u8   ipv4_frag;	/* One of OVS_FRAG_TYPE_*. */
+};
+
+struct ovs_key_ipv6 {
+	__be32 ipv6_src[4];
+	__be32 ipv6_dst[4];
+	__be32 ipv6_label;	/* 20-bits in least-significant bits. */
+	__u8   ipv6_proto;
+	__u8   ipv6_tclass;
+	__u8   ipv6_hlimit;
+	__u8   ipv6_frag;	/* One of OVS_FRAG_TYPE_*. */
+};
+
+struct ovs_key_tcp {
+	__be16 tcp_src;
+	__be16 tcp_dst;
+};
+
+struct ovs_key_udp {
+	__be16 udp_src;
+	__be16 udp_dst;
+};
+
+struct ovs_key_icmp {
+	__u8 icmp_type;
+	__u8 icmp_code;
+};
+
+struct ovs_key_icmpv6 {
+	__u8 icmpv6_type;
+	__u8 icmpv6_code;
+};
+
+struct ovs_key_arp {
+	__be32 arp_sip;
+	__be32 arp_tip;
+	__be16 arp_op;
+	__u8   arp_sha[6];
+	__u8   arp_tha[6];
+};
+
+struct ovs_key_nd {
+	__u32 nd_target[4];
+	__u8  nd_sll[6];
+	__u8  nd_tll[6];
+};
+
+/**
+ * enum ovs_flow_attr - attributes for %OVS_FLOW_* commands.
+ * @OVS_FLOW_ATTR_KEY: Nested %OVS_KEY_ATTR_* attributes specifying the flow
+ * key.  Always present in notifications.  Required for all requests (except
+ * dumps).
+ * @OVS_FLOW_ATTR_ACTIONS: Nested %OVS_ACTION_ATTR_* attributes specifying
+ * the actions to take for packets that match the key.  Always present in
+ * notifications.  Required for %OVS_FLOW_CMD_NEW requests, optional for
+ * %OVS_FLOW_CMD_SET requests.
+ * @OVS_FLOW_ATTR_STATS: &struct ovs_flow_stats giving statistics for this
+ * flow.  Present in notifications if the stats would be nonzero.  Ignored in
+ * requests.
+ * @OVS_FLOW_ATTR_TCP_FLAGS: An 8-bit value giving the OR'd value of all of the
+ * TCP flags seen on packets in this flow.  Only present in notifications for
+ * TCP flows, and only if it would be nonzero.  Ignored in requests.
+ * @OVS_FLOW_ATTR_USED: A 64-bit integer giving the time, in milliseconds on
+ * the system monotonic clock, at which a packet was last processed for this
+ * flow.  Only present in notifications if a packet has been processed for this
+ * flow.  Ignored in requests.
+ * @OVS_FLOW_ATTR_CLEAR: If present in a %OVS_FLOW_CMD_SET request, clears the
+ * last-used time, accumulated TCP flags, and statistics for this flow.
+ * Otherwise ignored in requests.  Never present in notifications.
+ *
+ * These attributes follow the &struct ovs_header within the Generic Netlink
+ * payload for %OVS_FLOW_* commands.
+ */
+enum ovs_flow_attr {
+	OVS_FLOW_ATTR_UNSPEC,
+	OVS_FLOW_ATTR_KEY,       /* Sequence of OVS_KEY_ATTR_* attributes. */
+	OVS_FLOW_ATTR_ACTIONS,   /* Nested OVS_ACTION_ATTR_* attributes. */
+	OVS_FLOW_ATTR_STATS,     /* struct ovs_flow_stats. */
+	OVS_FLOW_ATTR_TCP_FLAGS, /* 8-bit OR'd TCP flags. */
+	OVS_FLOW_ATTR_USED,      /* u64 msecs last used in monotonic time. */
+	OVS_FLOW_ATTR_CLEAR,     /* Flag to clear stats, tcp_flags, used. */
+	__OVS_FLOW_ATTR_MAX
+};
+
+#define OVS_FLOW_ATTR_MAX (__OVS_FLOW_ATTR_MAX - 1)
+
+/**
+ * enum ovs_sample_attr - Attributes for %OVS_ACTION_ATTR_SAMPLE action.
+ * @OVS_SAMPLE_ATTR_PROBABILITY: 32-bit fraction of packets to sample with
+ * @OVS_ACTION_ATTR_SAMPLE.  A value of 0 samples no packets, a value of
+ * %UINT32_MAX samples all packets and intermediate values sample intermediate
+ * fractions of packets.
+ * @OVS_SAMPLE_ATTR_ACTIONS: Set of actions to execute in sampling event.
+ * Actions are passed as nested attributes.
+ *
+ * Executes the specified actions with the given probability on a per-packet
+ * basis.
+ */
+enum ovs_sample_attr {
+	OVS_SAMPLE_ATTR_UNSPEC,
+	OVS_SAMPLE_ATTR_PROBABILITY, /* u32 number */
+	OVS_SAMPLE_ATTR_ACTIONS,     /* Nested OVS_ACTION_ATTR_* attributes. */
+	__OVS_SAMPLE_ATTR_MAX,
+};
+
+#define OVS_SAMPLE_ATTR_MAX (__OVS_SAMPLE_ATTR_MAX - 1)
+
+/**
+ * enum ovs_userspace_attr - Attributes for %OVS_ACTION_ATTR_USERSPACE action.
+ * @OVS_USERSPACE_ATTR_PID: u32 Netlink PID to which the %OVS_PACKET_CMD_ACTION
+ * message should be sent.  Required.
+ * @OVS_USERSPACE_ATTR_USERDATA: If present, its u64 argument is copied to the
+ * %OVS_PACKET_CMD_ACTION message as %OVS_PACKET_ATTR_USERDATA,
+ */
+enum ovs_userspace_attr {
+	OVS_USERSPACE_ATTR_UNSPEC,
+	OVS_USERSPACE_ATTR_PID,	      /* u32 Netlink PID to receive upcalls. */
+	OVS_USERSPACE_ATTR_USERDATA,  /* u64 optional user-specified cookie. */
+	__OVS_USERSPACE_ATTR_MAX
+};
+
+#define OVS_USERSPACE_ATTR_MAX (__OVS_USERSPACE_ATTR_MAX - 1)
+
+/**
+ * struct ovs_action_push_vlan - %OVS_ACTION_ATTR_PUSH_VLAN action argument.
+ * @vlan_tpid: Tag protocol identifier (TPID) to push.
+ * @vlan_tci: Tag control identifier (TCI) to push.  The CFI bit must be set
+ * (but it will not be set in the 802.1Q header that is pushed).
+ *
+ * The @vlan_tpid value is typically %ETH_P_8021Q.  The only acceptable TPID
+ * values are those that the kernel module also parses as 802.1Q headers, to
+ * prevent %OVS_ACTION_ATTR_PUSH_VLAN followed by %OVS_ACTION_ATTR_POP_VLAN
+ * from having surprising results.
+ */
+struct ovs_action_push_vlan {
+	__be16 vlan_tpid;	/* 802.1Q TPID. */
+	__be16 vlan_tci;	/* 802.1Q TCI (VLAN ID and priority). */
+};
+
+/**
+ * enum ovs_action_attr - Action types.
+ *
+ * @OVS_ACTION_ATTR_OUTPUT: Output packet to port.
+ * @OVS_ACTION_ATTR_USERSPACE: Send packet to userspace according to nested
+ * %OVS_USERSPACE_ATTR_* attributes.
+ * @OVS_ACTION_ATTR_SET: Replaces the contents of an existing header.  The
+ * single nested %OVS_KEY_ATTR_* attribute specifies a header to modify and its
+ * value.
+ * @OVS_ACTION_ATTR_PUSH_VLAN: Push a new outermost 802.1Q header onto the
+ * packet.
+ * @OVS_ACTION_ATTR_POP_VLAN: Pop the outermost 802.1Q header off the packet.
+ * @OVS_ACTION_ATTR_SAMPLE: Probabilitically executes actions, as specified in
+ * the nested %OVS_SAMPLE_ATTR_* attributes.
+ *
+ * Only a single header can be set with a single %OVS_ACTION_ATTR_SET.  Not all
+ * fields within a header are modifiable, e.g. the IPv4 protocol and fragment
+ * type may not be changed.
+ */
+
+enum ovs_action_attr {
+	OVS_ACTION_ATTR_UNSPEC,
+	OVS_ACTION_ATTR_OUTPUT,	      /* u32 port number. */
+	OVS_ACTION_ATTR_USERSPACE,    /* Nested OVS_USERSPACE_ATTR_*. */
+	OVS_ACTION_ATTR_SET,          /* One nested OVS_KEY_ATTR_*. */
+	OVS_ACTION_ATTR_PUSH_VLAN,    /* struct ovs_action_push_vlan. */
+	OVS_ACTION_ATTR_POP_VLAN,     /* No argument. */
+	OVS_ACTION_ATTR_SAMPLE,       /* Nested OVS_SAMPLE_ATTR_*. */
+	__OVS_ACTION_ATTR_MAX
+};
+
+#define OVS_ACTION_ATTR_MAX (__OVS_ACTION_ATTR_MAX - 1)
+
+#endif /* _LINUX_OPENVSWITCH_H */
diff --git a/include/linux/opp.h b/include/linux/opp.h
new file mode 100644
index 00000000..2a4e5fae
--- /dev/null
+++ b/include/linux/opp.h
@@ -0,0 +1,126 @@
+/*
+ * Generic OPP Interface
+ *
+ * Copyright (C) 2009-2010 Texas Instruments Incorporated.
+ *	Nishanth Menon
+ *	Romit Dasgupta
+ *	Kevin Hilman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_OPP_H__
+#define __LINUX_OPP_H__
+
+#include <linux/err.h>
+#include <linux/cpufreq.h>
+#include <linux/notifier.h>
+
+struct opp;
+struct device;
+
+enum opp_event {
+	OPP_EVENT_ADD, OPP_EVENT_ENABLE, OPP_EVENT_DISABLE,
+};
+
+#if defined(CONFIG_PM_OPP)
+
+unsigned long opp_get_voltage(struct opp *opp);
+
+unsigned long opp_get_freq(struct opp *opp);
+
+int opp_get_opp_count(struct device *dev);
+
+struct opp *opp_find_freq_exact(struct device *dev, unsigned long freq,
+				bool available);
+
+struct opp *opp_find_freq_floor(struct device *dev, unsigned long *freq);
+
+struct opp *opp_find_freq_ceil(struct device *dev, unsigned long *freq);
+
+int opp_add(struct device *dev, unsigned long freq, unsigned long u_volt);
+
+int opp_enable(struct device *dev, unsigned long freq);
+
+int opp_disable(struct device *dev, unsigned long freq);
+
+struct srcu_notifier_head *opp_get_notifier(struct device *dev);
+
+#else
+static inline unsigned long opp_get_voltage(struct opp *opp)
+{
+	return 0;
+}
+
+static inline unsigned long opp_get_freq(struct opp *opp)
+{
+	return 0;
+}
+
+static inline int opp_get_opp_count(struct device *dev)
+{
+	return 0;
+}
+
+static inline struct opp *opp_find_freq_exact(struct device *dev,
+					unsigned long freq, bool available)
+{
+	return ERR_PTR(-EINVAL);
+}
+
+static inline struct opp *opp_find_freq_floor(struct device *dev,
+					unsigned long *freq)
+{
+	return ERR_PTR(-EINVAL);
+}
+
+static inline struct opp *opp_find_freq_ceil(struct device *dev,
+					unsigned long *freq)
+{
+	return ERR_PTR(-EINVAL);
+}
+
+static inline int opp_add(struct device *dev, unsigned long freq,
+					unsigned long u_volt)
+{
+	return -EINVAL;
+}
+
+static inline int opp_enable(struct device *dev, unsigned long freq)
+{
+	return 0;
+}
+
+static inline int opp_disable(struct device *dev, unsigned long freq)
+{
+	return 0;
+}
+
+static inline struct srcu_notifier_head *opp_get_notifier(struct device *dev)
+{
+	return ERR_PTR(-EINVAL);
+}
+#endif		/* CONFIG_PM_OPP */
+
+#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_PM_OPP)
+int opp_init_cpufreq_table(struct device *dev,
+			    struct cpufreq_frequency_table **table);
+void opp_free_cpufreq_table(struct device *dev,
+				struct cpufreq_frequency_table **table);
+#else
+static inline int opp_init_cpufreq_table(struct device *dev,
+			    struct cpufreq_frequency_table **table)
+{
+	return -EINVAL;
+}
+
+static inline
+void opp_free_cpufreq_table(struct device *dev,
+				struct cpufreq_frequency_table **table)
+{
+}
+#endif		/* CONFIG_CPU_FREQ */
+
+#endif		/* __LINUX_OPP_H__ */
diff --git a/include/linux/oprofile.h b/include/linux/oprofile.h
new file mode 100644
index 00000000..a4c56245
--- /dev/null
+++ b/include/linux/oprofile.h
@@ -0,0 +1,211 @@
+/**
+ * @file oprofile.h
+ *
+ * API for machine-specific interrupts to interface
+ * to oprofile.
+ *
+ * @remark Copyright 2002 OProfile authors
+ * @remark Read the file COPYING
+ *
+ * @author John Levon <levon@movementarian.org>
+ */
+
+#ifndef OPROFILE_H
+#define OPROFILE_H
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/printk.h>
+#include <linux/atomic.h>
+ 
+/* Each escaped entry is prefixed by ESCAPE_CODE
+ * then one of the following codes, then the
+ * relevant data.
+ * These #defines live in this file so that arch-specific
+ * buffer sync'ing code can access them.
+ */
+#define ESCAPE_CODE			~0UL
+#define CTX_SWITCH_CODE			1
+#define CPU_SWITCH_CODE			2
+#define COOKIE_SWITCH_CODE		3
+#define KERNEL_ENTER_SWITCH_CODE	4
+#define KERNEL_EXIT_SWITCH_CODE		5
+#define MODULE_LOADED_CODE		6
+#define CTX_TGID_CODE			7
+#define TRACE_BEGIN_CODE		8
+#define TRACE_END_CODE			9
+#define XEN_ENTER_SWITCH_CODE		10
+#define SPU_PROFILING_CODE		11
+#define SPU_CTX_SWITCH_CODE		12
+#define IBS_FETCH_CODE			13
+#define IBS_OP_CODE			14
+
+struct super_block;
+struct dentry;
+struct file_operations;
+struct pt_regs;
+ 
+/* Operations structure to be filled in */
+struct oprofile_operations {
+	/* create any necessary configuration files in the oprofile fs.
+	 * Optional. */
+	int (*create_files)(struct super_block * sb, struct dentry * root);
+	/* Do any necessary interrupt setup. Optional. */
+	int (*setup)(void);
+	/* Do any necessary interrupt shutdown. Optional. */
+	void (*shutdown)(void);
+	/* Start delivering interrupts. */
+	int (*start)(void);
+	/* Stop delivering interrupts. */
+	void (*stop)(void);
+	/* Arch-specific buffer sync functions.
+	 * Return value = 0:  Success
+	 * Return value = -1: Failure
+	 * Return value = 1:  Run generic sync function
+	 */
+	int (*sync_start)(void);
+	int (*sync_stop)(void);
+
+	/* Initiate a stack backtrace. Optional. */
+	void (*backtrace)(struct pt_regs * const regs, unsigned int depth);
+
+	/* Multiplex between different events. Optional. */
+	int (*switch_events)(void);
+	/* CPU identification string. */
+	char * cpu_type;
+};
+
+/**
+ * One-time initialisation. *ops must be set to a filled-in
+ * operations structure. This is called even in timer interrupt
+ * mode so an arch can set a backtrace callback.
+ *
+ * If an error occurs, the fields should be left untouched.
+ */
+int oprofile_arch_init(struct oprofile_operations * ops);
+ 
+/**
+ * One-time exit/cleanup for the arch.
+ */
+void oprofile_arch_exit(void);
+
+/**
+ * Add a sample. This may be called from any context.
+ */
+void oprofile_add_sample(struct pt_regs * const regs, unsigned long event);
+
+/**
+ * Add an extended sample.  Use this when the PC is not from the regs, and
+ * we cannot determine if we're in kernel mode from the regs.
+ *
+ * This function does perform a backtrace.
+ *
+ */
+void oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs,
+				unsigned long event, int is_kernel);
+
+/**
+ * Add an hardware sample.
+ */
+void oprofile_add_ext_hw_sample(unsigned long pc, struct pt_regs * const regs,
+	unsigned long event, int is_kernel,
+	struct task_struct *task);
+
+/* Use this instead when the PC value is not from the regs. Doesn't
+ * backtrace. */
+void oprofile_add_pc(unsigned long pc, int is_kernel, unsigned long event);
+
+/* add a backtrace entry, to be called from the ->backtrace callback */
+void oprofile_add_trace(unsigned long eip);
+
+
+/**
+ * Create a file of the given name as a child of the given root, with
+ * the specified file operations.
+ */
+int oprofilefs_create_file(struct super_block * sb, struct dentry * root,
+	char const * name, const struct file_operations * fops);
+
+int oprofilefs_create_file_perm(struct super_block * sb, struct dentry * root,
+	char const * name, const struct file_operations * fops, int perm);
+ 
+/** Create a file for read/write access to an unsigned long. */
+int oprofilefs_create_ulong(struct super_block * sb, struct dentry * root,
+	char const * name, ulong * val);
+ 
+/** Create a file for read-only access to an unsigned long. */
+int oprofilefs_create_ro_ulong(struct super_block * sb, struct dentry * root,
+	char const * name, ulong * val);
+ 
+/** Create a file for read-only access to an atomic_t. */
+int oprofilefs_create_ro_atomic(struct super_block * sb, struct dentry * root,
+	char const * name, atomic_t * val);
+ 
+/** create a directory */
+struct dentry * oprofilefs_mkdir(struct super_block * sb, struct dentry * root,
+	char const * name);
+
+/**
+ * Write the given asciz string to the given user buffer @buf, updating *offset
+ * appropriately. Returns bytes written or -EFAULT.
+ */
+ssize_t oprofilefs_str_to_user(char const * str, char __user * buf, size_t count, loff_t * offset);
+
+/**
+ * Convert an unsigned long value into ASCII and copy it to the user buffer @buf,
+ * updating *offset appropriately. Returns bytes written or -EFAULT.
+ */
+ssize_t oprofilefs_ulong_to_user(unsigned long val, char __user * buf, size_t count, loff_t * offset);
+
+/**
+ * Read an ASCII string for a number from a userspace buffer and fill *val on success.
+ * Returns 0 on success, < 0 on error.
+ */
+int oprofilefs_ulong_from_user(unsigned long * val, char const __user * buf, size_t count);
+
+/** lock for read/write safety */
+extern raw_spinlock_t oprofilefs_lock;
+
+/**
+ * Add the contents of a circular buffer to the event buffer.
+ */
+void oprofile_put_buff(unsigned long *buf, unsigned int start,
+			unsigned int stop, unsigned int max);
+
+unsigned long oprofile_get_cpu_buffer_size(void);
+void oprofile_cpu_buffer_inc_smpl_lost(void);
+ 
+/* cpu buffer functions */
+
+struct op_sample;
+
+struct op_entry {
+	struct ring_buffer_event *event;
+	struct op_sample *sample;
+	unsigned long size;
+	unsigned long *data;
+};
+
+void oprofile_write_reserve(struct op_entry *entry,
+			    struct pt_regs * const regs,
+			    unsigned long pc, int code, int size);
+int oprofile_add_data(struct op_entry *entry, unsigned long val);
+int oprofile_add_data64(struct op_entry *entry, u64 val);
+int oprofile_write_commit(struct op_entry *entry);
+
+#ifdef CONFIG_HW_PERF_EVENTS
+int __init oprofile_perf_init(struct oprofile_operations *ops);
+void oprofile_perf_exit(void);
+char *op_name_from_perf_id(void);
+#else
+static inline int __init oprofile_perf_init(struct oprofile_operations *ops)
+{
+	pr_info("oprofile: hardware counters not available\n");
+	return -ENODEV;
+}
+static inline void oprofile_perf_exit(void) { }
+#endif /* CONFIG_HW_PERF_EVENTS */
+
+#endif /* OPROFILE_H */
diff --git a/include/linux/oxu210hp.h b/include/linux/oxu210hp.h
new file mode 100644
index 00000000..0bf96eae
--- /dev/null
+++ b/include/linux/oxu210hp.h
@@ -0,0 +1,7 @@
+/* platform data for the OXU210HP HCD */
+
+struct oxu210hp_platform_data {
+	unsigned int bus16:1;
+	unsigned int use_hcd_otg:1;
+	unsigned int use_hcd_sph:1;
+};
diff --git a/include/linux/padata.h b/include/linux/padata.h
new file mode 100644
index 00000000..86292bee
--- /dev/null
+++ b/include/linux/padata.h
@@ -0,0 +1,190 @@
+/*
+ * padata.h - header for the padata parallelization interface
+ *
+ * Copyright (C) 2008, 2009 secunet Security Networks AG
+ * Copyright (C) 2008, 2009 Steffen Klassert <steffen.klassert@secunet.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef PADATA_H
+#define PADATA_H
+
+#include <linux/workqueue.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/notifier.h>
+#include <linux/kobject.h>
+
+#define PADATA_CPU_SERIAL   0x01
+#define PADATA_CPU_PARALLEL 0x02
+
+/**
+ * struct padata_priv -  Embedded to the users data structure.
+ *
+ * @list: List entry, to attach to the padata lists.
+ * @pd: Pointer to the internal control structure.
+ * @cb_cpu: Callback cpu for serializatioon.
+ * @seq_nr: Sequence number of the parallelized data object.
+ * @info: Used to pass information from the parallel to the serial function.
+ * @parallel: Parallel execution function.
+ * @serial: Serial complete function.
+ */
+struct padata_priv {
+	struct list_head	list;
+	struct parallel_data	*pd;
+	int			cb_cpu;
+	int			info;
+	void                    (*parallel)(struct padata_priv *padata);
+	void                    (*serial)(struct padata_priv *padata);
+};
+
+/**
+ * struct padata_list
+ *
+ * @list: List head.
+ * @lock: List lock.
+ */
+struct padata_list {
+	struct list_head        list;
+	spinlock_t              lock;
+};
+
+/**
+* struct padata_serial_queue - The percpu padata serial queue
+*
+* @serial: List to wait for serialization after reordering.
+* @work: work struct for serialization.
+* @pd: Backpointer to the internal control structure.
+*/
+struct padata_serial_queue {
+       struct padata_list    serial;
+       struct work_struct    work;
+       struct parallel_data *pd;
+};
+
+/**
+ * struct padata_parallel_queue - The percpu padata parallel queue
+ *
+ * @parallel: List to wait for parallelization.
+ * @reorder: List to wait for reordering after parallel processing.
+ * @serial: List to wait for serialization after reordering.
+ * @pwork: work struct for parallelization.
+ * @swork: work struct for serialization.
+ * @pd: Backpointer to the internal control structure.
+ * @work: work struct for parallelization.
+ * @num_obj: Number of objects that are processed by this cpu.
+ * @cpu_index: Index of the cpu.
+ */
+struct padata_parallel_queue {
+       struct padata_list    parallel;
+       struct padata_list    reorder;
+       struct parallel_data *pd;
+       struct work_struct    work;
+       atomic_t              num_obj;
+       int                   cpu_index;
+};
+
+/**
+ * struct padata_cpumask - The cpumasks for the parallel/serial workers
+ *
+ * @pcpu: cpumask for the parallel workers.
+ * @cbcpu: cpumask for the serial (callback) workers.
+ */
+struct padata_cpumask {
+	cpumask_var_t	pcpu;
+	cpumask_var_t	cbcpu;
+};
+
+/**
+ * struct parallel_data - Internal control structure, covers everything
+ * that depends on the cpumask in use.
+ *
+ * @pinst: padata instance.
+ * @pqueue: percpu padata queues used for parallelization.
+ * @squeue: percpu padata queues used for serialuzation.
+ * @reorder_objects: Number of objects waiting in the reorder queues.
+ * @refcnt: Number of objects holding a reference on this parallel_data.
+ * @max_seq_nr:  Maximal used sequence number.
+ * @cpumask: The cpumasks in use for parallel and serial workers.
+ * @lock: Reorder lock.
+ * @processed: Number of already processed objects.
+ * @timer: Reorder timer.
+ */
+struct parallel_data {
+	struct padata_instance		*pinst;
+	struct padata_parallel_queue	__percpu *pqueue;
+	struct padata_serial_queue	__percpu *squeue;
+	atomic_t			reorder_objects;
+	atomic_t			refcnt;
+	struct padata_cpumask		cpumask;
+	spinlock_t                      lock ____cacheline_aligned;
+	spinlock_t                      seq_lock;
+	unsigned int			seq_nr;
+	unsigned int			processed;
+	struct timer_list		timer;
+};
+
+/**
+ * struct padata_instance - The overall control structure.
+ *
+ * @cpu_notifier: cpu hotplug notifier.
+ * @wq: The workqueue in use.
+ * @pd: The internal control structure.
+ * @cpumask: User supplied cpumasks for parallel and serial works.
+ * @cpumask_change_notifier: Notifiers chain for user-defined notify
+ *            callbacks that will be called when either @pcpu or @cbcpu
+ *            or both cpumasks change.
+ * @kobj: padata instance kernel object.
+ * @lock: padata instance lock.
+ * @flags: padata flags.
+ */
+struct padata_instance {
+	struct notifier_block		 cpu_notifier;
+	struct workqueue_struct		*wq;
+	struct parallel_data		*pd;
+	struct padata_cpumask		cpumask;
+	struct blocking_notifier_head	 cpumask_change_notifier;
+	struct kobject                   kobj;
+	struct mutex			 lock;
+	u8				 flags;
+#define	PADATA_INIT	1
+#define	PADATA_RESET	2
+#define	PADATA_INVALID	4
+};
+
+extern struct padata_instance *padata_alloc_possible(
+					struct workqueue_struct *wq);
+extern struct padata_instance *padata_alloc(struct workqueue_struct *wq,
+					    const struct cpumask *pcpumask,
+					    const struct cpumask *cbcpumask);
+extern void padata_free(struct padata_instance *pinst);
+extern int padata_do_parallel(struct padata_instance *pinst,
+			      struct padata_priv *padata, int cb_cpu);
+extern void padata_do_serial(struct padata_priv *padata);
+extern int padata_set_cpumask(struct padata_instance *pinst, int cpumask_type,
+			      cpumask_var_t cpumask);
+extern int padata_set_cpumasks(struct padata_instance *pinst,
+			       cpumask_var_t pcpumask,
+			       cpumask_var_t cbcpumask);
+extern int padata_add_cpu(struct padata_instance *pinst, int cpu, int mask);
+extern int padata_remove_cpu(struct padata_instance *pinst, int cpu, int mask);
+extern int padata_start(struct padata_instance *pinst);
+extern void padata_stop(struct padata_instance *pinst);
+extern int padata_register_cpumask_notifier(struct padata_instance *pinst,
+					    struct notifier_block *nblock);
+extern int padata_unregister_cpumask_notifier(struct padata_instance *pinst,
+					      struct notifier_block *nblock);
+#endif
diff --git a/include/linux/page-debug-flags.h b/include/linux/page-debug-flags.h
new file mode 100644
index 00000000..22691f61
--- /dev/null
+++ b/include/linux/page-debug-flags.h
@@ -0,0 +1,32 @@
+#ifndef LINUX_PAGE_DEBUG_FLAGS_H
+#define  LINUX_PAGE_DEBUG_FLAGS_H
+
+/*
+ * page->debug_flags bits:
+ *
+ * PAGE_DEBUG_FLAG_POISON is set for poisoned pages. This is used to
+ * implement generic debug pagealloc feature. The pages are filled with
+ * poison patterns and set this flag after free_pages(). The poisoned
+ * pages are verified whether the patterns are not corrupted and clear
+ * the flag before alloc_pages().
+ */
+
+enum page_debug_flags {
+	PAGE_DEBUG_FLAG_POISON,		/* Page is poisoned */
+	PAGE_DEBUG_FLAG_GUARD,
+};
+
+/*
+ * Ensure that CONFIG_WANT_PAGE_DEBUG_FLAGS reliably
+ * gets turned off when no debug features are enabling it!
+ */
+
+#ifdef CONFIG_WANT_PAGE_DEBUG_FLAGS
+#if !defined(CONFIG_PAGE_POISONING) && \
+    !defined(CONFIG_PAGE_GUARD) \
+/* && !defined(CONFIG_PAGE_DEBUG_SOMETHING_ELSE) && ... */
+#error WANT_PAGE_DEBUG_FLAGS is turned on with no debug features!
+#endif
+#endif /* CONFIG_WANT_PAGE_DEBUG_FLAGS */
+
+#endif /* LINUX_PAGE_DEBUG_FLAGS_H */
diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h
new file mode 100644
index 00000000..c88d2a94
--- /dev/null
+++ b/include/linux/page-flags.h
@@ -0,0 +1,503 @@
+/*
+ * Macros for manipulating and testing page->flags
+ */
+
+#ifndef PAGE_FLAGS_H
+#define PAGE_FLAGS_H
+
+#include <linux/types.h>
+#include <linux/bug.h>
+#ifndef __GENERATING_BOUNDS_H
+#include <linux/mm_types.h>
+#include <generated/bounds.h>
+#endif /* !__GENERATING_BOUNDS_H */
+
+/*
+ * Various page->flags bits:
+ *
+ * PG_reserved is set for special pages, which can never be swapped out. Some
+ * of them might not even exist (eg empty_bad_page)...
+ *
+ * The PG_private bitflag is set on pagecache pages if they contain filesystem
+ * specific data (which is normally at page->private). It can be used by
+ * private allocations for its own usage.
+ *
+ * During initiation of disk I/O, PG_locked is set. This bit is set before I/O
+ * and cleared when writeback _starts_ or when read _completes_. PG_writeback
+ * is set before writeback starts and cleared when it finishes.
+ *
+ * PG_locked also pins a page in pagecache, and blocks truncation of the file
+ * while it is held.
+ *
+ * page_waitqueue(page) is a wait queue of all tasks waiting for the page
+ * to become unlocked.
+ *
+ * PG_uptodate tells whether the page's contents is valid.  When a read
+ * completes, the page becomes uptodate, unless a disk I/O error happened.
+ *
+ * PG_referenced, PG_reclaim are used for page reclaim for anonymous and
+ * file-backed pagecache (see mm/vmscan.c).
+ *
+ * PG_error is set to indicate that an I/O error occurred on this page.
+ *
+ * PG_arch_1 is an architecture specific page state bit.  The generic code
+ * guarantees that this bit is cleared for a page when it first is entered into
+ * the page cache.
+ *
+ * PG_highmem pages are not permanently mapped into the kernel virtual address
+ * space, they need to be kmapped separately for doing IO on the pages.  The
+ * struct page (these bits with information) are always mapped into kernel
+ * address space...
+ *
+ * PG_hwpoison indicates that a page got corrupted in hardware and contains
+ * data with incorrect ECC bits that triggered a machine check. Accessing is
+ * not safe since it may cause another machine check. Don't touch!
+ */
+
+/*
+ * Don't use the *_dontuse flags.  Use the macros.  Otherwise you'll break
+ * locked- and dirty-page accounting.
+ *
+ * The page flags field is split into two parts, the main flags area
+ * which extends from the low bits upwards, and the fields area which
+ * extends from the high bits downwards.
+ *
+ *  | FIELD | ... | FLAGS |
+ *  N-1           ^       0
+ *               (NR_PAGEFLAGS)
+ *
+ * The fields area is reserved for fields mapping zone, node (for NUMA) and
+ * SPARSEMEM section (for variants of SPARSEMEM that require section ids like
+ * SPARSEMEM_EXTREME with !SPARSEMEM_VMEMMAP).
+ */
+enum pageflags {
+	PG_locked,		/* Page is locked. Don't touch. */
+	PG_error,
+	PG_referenced,
+	PG_uptodate,
+	PG_dirty,
+	PG_lru,
+	PG_active,
+	PG_slab,
+	PG_owner_priv_1,	/* Owner use. If pagecache, fs may use*/
+	PG_arch_1,
+	PG_reserved,
+	PG_private,		/* If pagecache, has fs-private data */
+	PG_private_2,		/* If pagecache, has fs aux data */
+	PG_writeback,		/* Page is under writeback */
+#ifdef CONFIG_PAGEFLAGS_EXTENDED
+	PG_head,		/* A head page */
+	PG_tail,		/* A tail page */
+#else
+	PG_compound,		/* A compound page */
+#endif
+	PG_swapcache,		/* Swap page: swp_entry_t in private */
+	PG_mappedtodisk,	/* Has blocks allocated on-disk */
+	PG_reclaim,		/* To be reclaimed asap */
+	PG_swapbacked,		/* Page is backed by RAM/swap */
+	PG_unevictable,		/* Page is "unevictable"  */
+#ifdef CONFIG_MMU
+	PG_mlocked,		/* Page is vma mlocked */
+#endif
+#ifdef CONFIG_ARCH_USES_PG_UNCACHED
+	PG_uncached,		/* Page has been mapped as uncached */
+#endif
+#ifdef CONFIG_MEMORY_FAILURE
+	PG_hwpoison,		/* hardware poisoned page. Don't touch */
+#endif
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+	PG_compound_lock,
+#endif
+	__NR_PAGEFLAGS,
+
+	/* Filesystems */
+	PG_checked = PG_owner_priv_1,
+
+	/* Two page bits are conscripted by FS-Cache to maintain local caching
+	 * state.  These bits are set on pages belonging to the netfs's inodes
+	 * when those inodes are being locally cached.
+	 */
+	PG_fscache = PG_private_2,	/* page backed by cache */
+
+	/* XEN */
+	PG_pinned = PG_owner_priv_1,
+	PG_savepinned = PG_dirty,
+
+	/* SLOB */
+	PG_slob_free = PG_private,
+};
+
+#ifndef __GENERATING_BOUNDS_H
+
+/*
+ * Macros to create function definitions for page flags
+ */
+#define TESTPAGEFLAG(uname, lname)					\
+static inline int Page##uname(const struct page *page)			\
+			{ return test_bit(PG_##lname, &page->flags); }
+
+#define SETPAGEFLAG(uname, lname)					\
+static inline void SetPage##uname(struct page *page)			\
+			{ set_bit(PG_##lname, &page->flags); }
+
+#define CLEARPAGEFLAG(uname, lname)					\
+static inline void ClearPage##uname(struct page *page)			\
+			{ clear_bit(PG_##lname, &page->flags); }
+
+#define __SETPAGEFLAG(uname, lname)					\
+static inline void __SetPage##uname(struct page *page)			\
+			{ __set_bit(PG_##lname, &page->flags); }
+
+#define __CLEARPAGEFLAG(uname, lname)					\
+static inline void __ClearPage##uname(struct page *page)		\
+			{ __clear_bit(PG_##lname, &page->flags); }
+
+#define TESTSETFLAG(uname, lname)					\
+static inline int TestSetPage##uname(struct page *page)			\
+		{ return test_and_set_bit(PG_##lname, &page->flags); }
+
+#define TESTCLEARFLAG(uname, lname)					\
+static inline int TestClearPage##uname(struct page *page)		\
+		{ return test_and_clear_bit(PG_##lname, &page->flags); }
+
+#define __TESTCLEARFLAG(uname, lname)					\
+static inline int __TestClearPage##uname(struct page *page)		\
+		{ return __test_and_clear_bit(PG_##lname, &page->flags); }
+
+#define PAGEFLAG(uname, lname) TESTPAGEFLAG(uname, lname)		\
+	SETPAGEFLAG(uname, lname) CLEARPAGEFLAG(uname, lname)
+
+#define __PAGEFLAG(uname, lname) TESTPAGEFLAG(uname, lname)		\
+	__SETPAGEFLAG(uname, lname)  __CLEARPAGEFLAG(uname, lname)
+
+#define PAGEFLAG_FALSE(uname) 						\
+static inline int Page##uname(const struct page *page)			\
+			{ return 0; }
+
+#define TESTSCFLAG(uname, lname)					\
+	TESTSETFLAG(uname, lname) TESTCLEARFLAG(uname, lname)
+
+#define SETPAGEFLAG_NOOP(uname)						\
+static inline void SetPage##uname(struct page *page) {  }
+
+#define CLEARPAGEFLAG_NOOP(uname)					\
+static inline void ClearPage##uname(struct page *page) {  }
+
+#define __CLEARPAGEFLAG_NOOP(uname)					\
+static inline void __ClearPage##uname(struct page *page) {  }
+
+#define TESTCLEARFLAG_FALSE(uname)					\
+static inline int TestClearPage##uname(struct page *page) { return 0; }
+
+#define __TESTCLEARFLAG_FALSE(uname)					\
+static inline int __TestClearPage##uname(struct page *page) { return 0; }
+
+struct page;	/* forward declaration */
+
+TESTPAGEFLAG(Locked, locked)
+PAGEFLAG(Error, error) TESTCLEARFLAG(Error, error)
+PAGEFLAG(Referenced, referenced) TESTCLEARFLAG(Referenced, referenced)
+PAGEFLAG(Dirty, dirty) TESTSCFLAG(Dirty, dirty) __CLEARPAGEFLAG(Dirty, dirty)
+PAGEFLAG(LRU, lru) __CLEARPAGEFLAG(LRU, lru)
+PAGEFLAG(Active, active) __CLEARPAGEFLAG(Active, active)
+	TESTCLEARFLAG(Active, active)
+__PAGEFLAG(Slab, slab)
+PAGEFLAG(Checked, checked)		/* Used by some filesystems */
+PAGEFLAG(Pinned, pinned) TESTSCFLAG(Pinned, pinned)	/* Xen */
+PAGEFLAG(SavePinned, savepinned);			/* Xen */
+PAGEFLAG(Reserved, reserved) __CLEARPAGEFLAG(Reserved, reserved)
+PAGEFLAG(SwapBacked, swapbacked) __CLEARPAGEFLAG(SwapBacked, swapbacked)
+
+__PAGEFLAG(SlobFree, slob_free)
+
+/*
+ * Private page markings that may be used by the filesystem that owns the page
+ * for its own purposes.
+ * - PG_private and PG_private_2 cause releasepage() and co to be invoked
+ */
+PAGEFLAG(Private, private) __SETPAGEFLAG(Private, private)
+	__CLEARPAGEFLAG(Private, private)
+PAGEFLAG(Private2, private_2) TESTSCFLAG(Private2, private_2)
+PAGEFLAG(OwnerPriv1, owner_priv_1) TESTCLEARFLAG(OwnerPriv1, owner_priv_1)
+
+/*
+ * Only test-and-set exist for PG_writeback.  The unconditional operators are
+ * risky: they bypass page accounting.
+ */
+TESTPAGEFLAG(Writeback, writeback) TESTSCFLAG(Writeback, writeback)
+PAGEFLAG(MappedToDisk, mappedtodisk)
+
+/* PG_readahead is only used for file reads; PG_reclaim is only for writes */
+PAGEFLAG(Reclaim, reclaim) TESTCLEARFLAG(Reclaim, reclaim)
+PAGEFLAG(Readahead, reclaim)		/* Reminder to do async read-ahead */
+
+#ifdef CONFIG_HIGHMEM
+/*
+ * Must use a macro here due to header dependency issues. page_zone() is not
+ * available at this point.
+ */
+#define PageHighMem(__p) is_highmem(page_zone(__p))
+#else
+PAGEFLAG_FALSE(HighMem)
+#endif
+
+#ifdef CONFIG_SWAP
+PAGEFLAG(SwapCache, swapcache)
+#else
+PAGEFLAG_FALSE(SwapCache)
+	SETPAGEFLAG_NOOP(SwapCache) CLEARPAGEFLAG_NOOP(SwapCache)
+#endif
+
+PAGEFLAG(Unevictable, unevictable) __CLEARPAGEFLAG(Unevictable, unevictable)
+	TESTCLEARFLAG(Unevictable, unevictable)
+
+#ifdef CONFIG_MMU
+PAGEFLAG(Mlocked, mlocked) __CLEARPAGEFLAG(Mlocked, mlocked)
+	TESTSCFLAG(Mlocked, mlocked) __TESTCLEARFLAG(Mlocked, mlocked)
+#else
+PAGEFLAG_FALSE(Mlocked) SETPAGEFLAG_NOOP(Mlocked)
+	TESTCLEARFLAG_FALSE(Mlocked) __TESTCLEARFLAG_FALSE(Mlocked)
+#endif
+
+#ifdef CONFIG_ARCH_USES_PG_UNCACHED
+PAGEFLAG(Uncached, uncached)
+#else
+PAGEFLAG_FALSE(Uncached)
+#endif
+
+#ifdef CONFIG_MEMORY_FAILURE
+PAGEFLAG(HWPoison, hwpoison)
+TESTSCFLAG(HWPoison, hwpoison)
+#define __PG_HWPOISON (1UL << PG_hwpoison)
+#else
+PAGEFLAG_FALSE(HWPoison)
+#define __PG_HWPOISON 0
+#endif
+
+u64 stable_page_flags(struct page *page);
+
+static inline int PageUptodate(struct page *page)
+{
+	int ret = test_bit(PG_uptodate, &(page)->flags);
+
+	/*
+	 * Must ensure that the data we read out of the page is loaded
+	 * _after_ we've loaded page->flags to check for PageUptodate.
+	 * We can skip the barrier if the page is not uptodate, because
+	 * we wouldn't be reading anything from it.
+	 *
+	 * See SetPageUptodate() for the other side of the story.
+	 */
+	if (ret)
+		smp_rmb();
+
+	return ret;
+}
+
+static inline void __SetPageUptodate(struct page *page)
+{
+	smp_wmb();
+	__set_bit(PG_uptodate, &(page)->flags);
+}
+
+static inline void SetPageUptodate(struct page *page)
+{
+#ifdef CONFIG_S390
+	if (!test_and_set_bit(PG_uptodate, &page->flags))
+		page_set_storage_key(page_to_phys(page), PAGE_DEFAULT_KEY, 0);
+#else
+	/*
+	 * Memory barrier must be issued before setting the PG_uptodate bit,
+	 * so that all previous stores issued in order to bring the page
+	 * uptodate are actually visible before PageUptodate becomes true.
+	 *
+	 * s390 doesn't need an explicit smp_wmb here because the test and
+	 * set bit already provides full barriers.
+	 */
+	smp_wmb();
+	set_bit(PG_uptodate, &(page)->flags);
+#endif
+}
+
+CLEARPAGEFLAG(Uptodate, uptodate)
+
+extern void cancel_dirty_page(struct page *page, unsigned int account_size);
+
+int test_clear_page_writeback(struct page *page);
+int test_set_page_writeback(struct page *page);
+
+static inline void set_page_writeback(struct page *page)
+{
+	test_set_page_writeback(page);
+}
+
+#ifdef CONFIG_PAGEFLAGS_EXTENDED
+/*
+ * System with lots of page flags available. This allows separate
+ * flags for PageHead() and PageTail() checks of compound pages so that bit
+ * tests can be used in performance sensitive paths. PageCompound is
+ * generally not used in hot code paths.
+ */
+__PAGEFLAG(Head, head) CLEARPAGEFLAG(Head, head)
+__PAGEFLAG(Tail, tail)
+
+static inline int PageCompound(struct page *page)
+{
+	return page->flags & ((1L << PG_head) | (1L << PG_tail));
+
+}
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+static inline void ClearPageCompound(struct page *page)
+{
+	BUG_ON(!PageHead(page));
+	ClearPageHead(page);
+}
+#endif
+#else
+/*
+ * Reduce page flag use as much as possible by overlapping
+ * compound page flags with the flags used for page cache pages. Possible
+ * because PageCompound is always set for compound pages and not for
+ * pages on the LRU and/or pagecache.
+ */
+TESTPAGEFLAG(Compound, compound)
+__PAGEFLAG(Head, compound)
+
+/*
+ * PG_reclaim is used in combination with PG_compound to mark the
+ * head and tail of a compound page. This saves one page flag
+ * but makes it impossible to use compound pages for the page cache.
+ * The PG_reclaim bit would have to be used for reclaim or readahead
+ * if compound pages enter the page cache.
+ *
+ * PG_compound & PG_reclaim	=> Tail page
+ * PG_compound & ~PG_reclaim	=> Head page
+ */
+#define PG_head_tail_mask ((1L << PG_compound) | (1L << PG_reclaim))
+
+static inline int PageTail(struct page *page)
+{
+	return ((page->flags & PG_head_tail_mask) == PG_head_tail_mask);
+}
+
+static inline void __SetPageTail(struct page *page)
+{
+	page->flags |= PG_head_tail_mask;
+}
+
+static inline void __ClearPageTail(struct page *page)
+{
+	page->flags &= ~PG_head_tail_mask;
+}
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+static inline void ClearPageCompound(struct page *page)
+{
+	BUG_ON((page->flags & PG_head_tail_mask) != (1 << PG_compound));
+	clear_bit(PG_compound, &page->flags);
+}
+#endif
+
+#endif /* !PAGEFLAGS_EXTENDED */
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+/*
+ * PageHuge() only returns true for hugetlbfs pages, but not for
+ * normal or transparent huge pages.
+ *
+ * PageTransHuge() returns true for both transparent huge and
+ * hugetlbfs pages, but not normal pages. PageTransHuge() can only be
+ * called only in the core VM paths where hugetlbfs pages can't exist.
+ */
+static inline int PageTransHuge(struct page *page)
+{
+	VM_BUG_ON(PageTail(page));
+	return PageHead(page);
+}
+
+/*
+ * PageTransCompound returns true for both transparent huge pages
+ * and hugetlbfs pages, so it should only be called when it's known
+ * that hugetlbfs pages aren't involved.
+ */
+static inline int PageTransCompound(struct page *page)
+{
+	return PageCompound(page);
+}
+
+/*
+ * PageTransTail returns true for both transparent huge pages
+ * and hugetlbfs pages, so it should only be called when it's known
+ * that hugetlbfs pages aren't involved.
+ */
+static inline int PageTransTail(struct page *page)
+{
+	return PageTail(page);
+}
+
+#else
+
+static inline int PageTransHuge(struct page *page)
+{
+	return 0;
+}
+
+static inline int PageTransCompound(struct page *page)
+{
+	return 0;
+}
+
+static inline int PageTransTail(struct page *page)
+{
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_MMU
+#define __PG_MLOCKED		(1 << PG_mlocked)
+#else
+#define __PG_MLOCKED		0
+#endif
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#define __PG_COMPOUND_LOCK		(1 << PG_compound_lock)
+#else
+#define __PG_COMPOUND_LOCK		0
+#endif
+
+/*
+ * Flags checked when a page is freed.  Pages being freed should not have
+ * these flags set.  It they are, there is a problem.
+ */
+#define PAGE_FLAGS_CHECK_AT_FREE \
+	(1 << PG_lru	 | 1 << PG_locked    | \
+	 1 << PG_private | 1 << PG_private_2 | \
+	 1 << PG_writeback | 1 << PG_reserved | \
+	 1 << PG_slab	 | 1 << PG_swapcache | 1 << PG_active | \
+	 1 << PG_unevictable | __PG_MLOCKED | __PG_HWPOISON | \
+	 __PG_COMPOUND_LOCK)
+
+/*
+ * Flags checked when a page is prepped for return by the page allocator.
+ * Pages being prepped should not have any flags set.  It they are set,
+ * there has been a kernel bug or struct page corruption.
+ */
+#define PAGE_FLAGS_CHECK_AT_PREP	((1 << NR_PAGEFLAGS) - 1)
+
+#define PAGE_FLAGS_PRIVATE				\
+	(1 << PG_private | 1 << PG_private_2)
+/**
+ * page_has_private - Determine if page has private stuff
+ * @page: The page to be checked
+ *
+ * Determine if a page has private stuff, indicating that release routines
+ * should be invoked upon it.
+ */
+static inline int page_has_private(struct page *page)
+{
+	return !!(page->flags & PAGE_FLAGS_PRIVATE);
+}
+
+#endif /* !__GENERATING_BOUNDS_H */
+
+#endif	/* PAGE_FLAGS_H */
diff --git a/include/linux/page-isolation.h b/include/linux/page-isolation.h
new file mode 100644
index 00000000..051c1b1e
--- /dev/null
+++ b/include/linux/page-isolation.h
@@ -0,0 +1,37 @@
+#ifndef __LINUX_PAGEISOLATION_H
+#define __LINUX_PAGEISOLATION_H
+
+/*
+ * Changes migrate type in [start_pfn, end_pfn) to be MIGRATE_ISOLATE.
+ * If specified range includes migrate types other than MOVABLE,
+ * this will fail with -EBUSY.
+ *
+ * For isolating all pages in the range finally, the caller have to
+ * free all pages in the range. test_page_isolated() can be used for
+ * test it.
+ */
+extern int
+start_isolate_page_range(unsigned long start_pfn, unsigned long end_pfn);
+
+/*
+ * Changes MIGRATE_ISOLATE to MIGRATE_MOVABLE.
+ * target range is [start_pfn, end_pfn)
+ */
+extern int
+undo_isolate_page_range(unsigned long start_pfn, unsigned long end_pfn);
+
+/*
+ * test all pages in [start_pfn, end_pfn)are isolated or not.
+ */
+extern int
+test_pages_isolated(unsigned long start_pfn, unsigned long end_pfn);
+
+/*
+ * Internal funcs.Changes pageblock's migrate type.
+ * Please use make_pagetype_isolated()/make_pagetype_movable().
+ */
+extern int set_migratetype_isolate(struct page *page);
+extern void unset_migratetype_isolate(struct page *page);
+
+
+#endif
diff --git a/include/linux/page_cgroup.h b/include/linux/page_cgroup.h
new file mode 100644
index 00000000..a88cdba2
--- /dev/null
+++ b/include/linux/page_cgroup.h
@@ -0,0 +1,145 @@
+#ifndef __LINUX_PAGE_CGROUP_H
+#define __LINUX_PAGE_CGROUP_H
+
+enum {
+	/* flags for mem_cgroup */
+	PCG_LOCK,  /* Lock for pc->mem_cgroup and following bits. */
+	PCG_USED, /* this object is in use. */
+	PCG_MIGRATION, /* under page migration */
+	__NR_PCG_FLAGS,
+};
+
+#ifndef __GENERATING_BOUNDS_H
+#include <generated/bounds.h>
+
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
+#include <linux/bit_spinlock.h>
+
+/*
+ * Page Cgroup can be considered as an extended mem_map.
+ * A page_cgroup page is associated with every page descriptor. The
+ * page_cgroup helps us identify information about the cgroup
+ * All page cgroups are allocated at boot or memory hotplug event,
+ * then the page cgroup for pfn always exists.
+ */
+struct page_cgroup {
+	unsigned long flags;
+	struct mem_cgroup *mem_cgroup;
+};
+
+void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat);
+
+#ifdef CONFIG_SPARSEMEM
+static inline void __init page_cgroup_init_flatmem(void)
+{
+}
+extern void __init page_cgroup_init(void);
+#else
+void __init page_cgroup_init_flatmem(void);
+static inline void __init page_cgroup_init(void)
+{
+}
+#endif
+
+struct page_cgroup *lookup_page_cgroup(struct page *page);
+struct page *lookup_cgroup_page(struct page_cgroup *pc);
+
+#define TESTPCGFLAG(uname, lname)			\
+static inline int PageCgroup##uname(struct page_cgroup *pc)	\
+	{ return test_bit(PCG_##lname, &pc->flags); }
+
+#define SETPCGFLAG(uname, lname)			\
+static inline void SetPageCgroup##uname(struct page_cgroup *pc)\
+	{ set_bit(PCG_##lname, &pc->flags);  }
+
+#define CLEARPCGFLAG(uname, lname)			\
+static inline void ClearPageCgroup##uname(struct page_cgroup *pc)	\
+	{ clear_bit(PCG_##lname, &pc->flags);  }
+
+#define TESTCLEARPCGFLAG(uname, lname)			\
+static inline int TestClearPageCgroup##uname(struct page_cgroup *pc)	\
+	{ return test_and_clear_bit(PCG_##lname, &pc->flags);  }
+
+TESTPCGFLAG(Used, USED)
+CLEARPCGFLAG(Used, USED)
+SETPCGFLAG(Used, USED)
+
+SETPCGFLAG(Migration, MIGRATION)
+CLEARPCGFLAG(Migration, MIGRATION)
+TESTPCGFLAG(Migration, MIGRATION)
+
+static inline void lock_page_cgroup(struct page_cgroup *pc)
+{
+	/*
+	 * Don't take this lock in IRQ context.
+	 * This lock is for pc->mem_cgroup, USED, MIGRATION
+	 */
+	bit_spin_lock(PCG_LOCK, &pc->flags);
+}
+
+static inline void unlock_page_cgroup(struct page_cgroup *pc)
+{
+	bit_spin_unlock(PCG_LOCK, &pc->flags);
+}
+
+#else /* CONFIG_CGROUP_MEM_RES_CTLR */
+struct page_cgroup;
+
+static inline void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat)
+{
+}
+
+static inline struct page_cgroup *lookup_page_cgroup(struct page *page)
+{
+	return NULL;
+}
+
+static inline void page_cgroup_init(void)
+{
+}
+
+static inline void __init page_cgroup_init_flatmem(void)
+{
+}
+
+#endif /* CONFIG_CGROUP_MEM_RES_CTLR */
+
+#include <linux/swap.h>
+
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
+extern unsigned short swap_cgroup_cmpxchg(swp_entry_t ent,
+					unsigned short old, unsigned short new);
+extern unsigned short swap_cgroup_record(swp_entry_t ent, unsigned short id);
+extern unsigned short lookup_swap_cgroup_id(swp_entry_t ent);
+extern int swap_cgroup_swapon(int type, unsigned long max_pages);
+extern void swap_cgroup_swapoff(int type);
+#else
+
+static inline
+unsigned short swap_cgroup_record(swp_entry_t ent, unsigned short id)
+{
+	return 0;
+}
+
+static inline
+unsigned short lookup_swap_cgroup_id(swp_entry_t ent)
+{
+	return 0;
+}
+
+static inline int
+swap_cgroup_swapon(int type, unsigned long max_pages)
+{
+	return 0;
+}
+
+static inline void swap_cgroup_swapoff(int type)
+{
+	return;
+}
+
+#endif /* CONFIG_CGROUP_MEM_RES_CTLR_SWAP */
+
+#endif /* !__GENERATING_BOUNDS_H */
+
+#endif /* __LINUX_PAGE_CGROUP_H */
diff --git a/include/linux/pageblock-flags.h b/include/linux/pageblock-flags.h
new file mode 100644
index 00000000..19ef95d2
--- /dev/null
+++ b/include/linux/pageblock-flags.h
@@ -0,0 +1,74 @@
+/*
+ * Macros for manipulating and testing flags related to a
+ * pageblock_nr_pages number of pages.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2006
+ *
+ * Original author, Mel Gorman
+ * Major cleanups and reduction of bit operations, Andy Whitcroft
+ */
+#ifndef PAGEBLOCK_FLAGS_H
+#define PAGEBLOCK_FLAGS_H
+
+#include <linux/types.h>
+
+/* Bit indices that affect a whole block of pages */
+enum pageblock_bits {
+	PB_migrate,
+	PB_migrate_end = PB_migrate + 3 - 1,
+			/* 3 bits required for migrate types */
+	NR_PAGEBLOCK_BITS
+};
+
+#ifdef CONFIG_HUGETLB_PAGE
+
+#ifdef CONFIG_HUGETLB_PAGE_SIZE_VARIABLE
+
+/* Huge page sizes are variable */
+extern int pageblock_order;
+
+#else /* CONFIG_HUGETLB_PAGE_SIZE_VARIABLE */
+
+/* Huge pages are a constant size */
+#define pageblock_order		HUGETLB_PAGE_ORDER
+
+#endif /* CONFIG_HUGETLB_PAGE_SIZE_VARIABLE */
+
+#else /* CONFIG_HUGETLB_PAGE */
+
+/* If huge pages are not used, group by MAX_ORDER_NR_PAGES */
+#define pageblock_order		(MAX_ORDER-1)
+
+#endif /* CONFIG_HUGETLB_PAGE */
+
+#define pageblock_nr_pages	(1UL << pageblock_order)
+
+/* Forward declaration */
+struct page;
+
+/* Declarations for getting and setting flags. See mm/page_alloc.c */
+unsigned long get_pageblock_flags_group(struct page *page,
+					int start_bitidx, int end_bitidx);
+void set_pageblock_flags_group(struct page *page, unsigned long flags,
+					int start_bitidx, int end_bitidx);
+
+#define get_pageblock_flags(page) \
+			get_pageblock_flags_group(page, 0, NR_PAGEBLOCK_BITS-1)
+#define set_pageblock_flags(page, flags) \
+			set_pageblock_flags_group(page, flags,	\
+						  0, NR_PAGEBLOCK_BITS-1)
+
+#endif	/* PAGEBLOCK_FLAGS_H */
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
new file mode 100644
index 00000000..cfaaa694
--- /dev/null
+++ b/include/linux/pagemap.h
@@ -0,0 +1,479 @@
+#ifndef _LINUX_PAGEMAP_H
+#define _LINUX_PAGEMAP_H
+
+/*
+ * Copyright 1995 Linus Torvalds
+ */
+#include <linux/mm.h>
+#include <linux/fs.h>
+#include <linux/list.h>
+#include <linux/highmem.h>
+#include <linux/compiler.h>
+#include <asm/uaccess.h>
+#include <linux/gfp.h>
+#include <linux/bitops.h>
+#include <linux/hardirq.h> /* for in_interrupt() */
+#include <linux/hugetlb_inline.h>
+
+/*
+ * Bits in mapping->flags.  The lower __GFP_BITS_SHIFT bits are the page
+ * allocation mode flags.
+ */
+enum mapping_flags {
+	AS_EIO		= __GFP_BITS_SHIFT + 0,	/* IO error on async write */
+	AS_ENOSPC	= __GFP_BITS_SHIFT + 1,	/* ENOSPC on async write */
+	AS_MM_ALL_LOCKS	= __GFP_BITS_SHIFT + 2,	/* under mm_take_all_locks() */
+	AS_UNEVICTABLE	= __GFP_BITS_SHIFT + 3,	/* e.g., ramdisk, SHM_LOCK */
+};
+
+static inline void mapping_set_error(struct address_space *mapping, int error)
+{
+	if (unlikely(error)) {
+		if (error == -ENOSPC)
+			set_bit(AS_ENOSPC, &mapping->flags);
+		else
+			set_bit(AS_EIO, &mapping->flags);
+	}
+}
+
+static inline void mapping_set_unevictable(struct address_space *mapping)
+{
+	set_bit(AS_UNEVICTABLE, &mapping->flags);
+}
+
+static inline void mapping_clear_unevictable(struct address_space *mapping)
+{
+	clear_bit(AS_UNEVICTABLE, &mapping->flags);
+}
+
+static inline int mapping_unevictable(struct address_space *mapping)
+{
+	if (mapping)
+		return test_bit(AS_UNEVICTABLE, &mapping->flags);
+	return !!mapping;
+}
+
+static inline gfp_t mapping_gfp_mask(struct address_space * mapping)
+{
+	return (__force gfp_t)mapping->flags & __GFP_BITS_MASK;
+}
+
+/*
+ * This is non-atomic.  Only to be used before the mapping is activated.
+ * Probably needs a barrier...
+ */
+static inline void mapping_set_gfp_mask(struct address_space *m, gfp_t mask)
+{
+	m->flags = (m->flags & ~(__force unsigned long)__GFP_BITS_MASK) |
+				(__force unsigned long)mask;
+}
+
+/*
+ * The page cache can done in larger chunks than
+ * one page, because it allows for more efficient
+ * throughput (it can then be mapped into user
+ * space in smaller chunks for same flexibility).
+ *
+ * Or rather, it _will_ be done in larger chunks.
+ */
+#define PAGE_CACHE_SHIFT	PAGE_SHIFT
+#define PAGE_CACHE_SIZE		PAGE_SIZE
+#define PAGE_CACHE_MASK		PAGE_MASK
+#define PAGE_CACHE_ALIGN(addr)	(((addr)+PAGE_CACHE_SIZE-1)&PAGE_CACHE_MASK)
+
+#define page_cache_get(page)		get_page(page)
+#define page_cache_release(page)	put_page(page)
+void release_pages(struct page **pages, int nr, int cold);
+
+/*
+ * speculatively take a reference to a page.
+ * If the page is free (_count == 0), then _count is untouched, and 0
+ * is returned. Otherwise, _count is incremented by 1 and 1 is returned.
+ *
+ * This function must be called inside the same rcu_read_lock() section as has
+ * been used to lookup the page in the pagecache radix-tree (or page table):
+ * this allows allocators to use a synchronize_rcu() to stabilize _count.
+ *
+ * Unless an RCU grace period has passed, the count of all pages coming out
+ * of the allocator must be considered unstable. page_count may return higher
+ * than expected, and put_page must be able to do the right thing when the
+ * page has been finished with, no matter what it is subsequently allocated
+ * for (because put_page is what is used here to drop an invalid speculative
+ * reference).
+ *
+ * This is the interesting part of the lockless pagecache (and lockless
+ * get_user_pages) locking protocol, where the lookup-side (eg. find_get_page)
+ * has the following pattern:
+ * 1. find page in radix tree
+ * 2. conditionally increment refcount
+ * 3. check the page is still in pagecache (if no, goto 1)
+ *
+ * Remove-side that cares about stability of _count (eg. reclaim) has the
+ * following (with tree_lock held for write):
+ * A. atomically check refcount is correct and set it to 0 (atomic_cmpxchg)
+ * B. remove page from pagecache
+ * C. free the page
+ *
+ * There are 2 critical interleavings that matter:
+ * - 2 runs before A: in this case, A sees elevated refcount and bails out
+ * - A runs before 2: in this case, 2 sees zero refcount and retries;
+ *   subsequently, B will complete and 1 will find no page, causing the
+ *   lookup to return NULL.
+ *
+ * It is possible that between 1 and 2, the page is removed then the exact same
+ * page is inserted into the same position in pagecache. That's OK: the
+ * old find_get_page using tree_lock could equally have run before or after
+ * such a re-insertion, depending on order that locks are granted.
+ *
+ * Lookups racing against pagecache insertion isn't a big problem: either 1
+ * will find the page or it will not. Likewise, the old find_get_page could run
+ * either before the insertion or afterwards, depending on timing.
+ */
+static inline int page_cache_get_speculative(struct page *page)
+{
+	VM_BUG_ON(in_interrupt());
+
+#if !defined(CONFIG_SMP) && defined(CONFIG_TREE_RCU)
+# ifdef CONFIG_PREEMPT_COUNT
+	VM_BUG_ON(!in_atomic());
+# endif
+	/*
+	 * Preempt must be disabled here - we rely on rcu_read_lock doing
+	 * this for us.
+	 *
+	 * Pagecache won't be truncated from interrupt context, so if we have
+	 * found a page in the radix tree here, we have pinned its refcount by
+	 * disabling preempt, and hence no need for the "speculative get" that
+	 * SMP requires.
+	 */
+	VM_BUG_ON(page_count(page) == 0);
+	atomic_inc(&page->_count);
+
+#else
+	if (unlikely(!get_page_unless_zero(page))) {
+		/*
+		 * Either the page has been freed, or will be freed.
+		 * In either case, retry here and the caller should
+		 * do the right thing (see comments above).
+		 */
+		return 0;
+	}
+#endif
+	VM_BUG_ON(PageTail(page));
+
+	return 1;
+}
+
+/*
+ * Same as above, but add instead of inc (could just be merged)
+ */
+static inline int page_cache_add_speculative(struct page *page, int count)
+{
+	VM_BUG_ON(in_interrupt());
+
+#if !defined(CONFIG_SMP) && defined(CONFIG_TREE_RCU)
+# ifdef CONFIG_PREEMPT_COUNT
+	VM_BUG_ON(!in_atomic());
+# endif
+	VM_BUG_ON(page_count(page) == 0);
+	atomic_add(count, &page->_count);
+
+#else
+	if (unlikely(!atomic_add_unless(&page->_count, count, 0)))
+		return 0;
+#endif
+	VM_BUG_ON(PageCompound(page) && page != compound_head(page));
+
+	return 1;
+}
+
+static inline int page_freeze_refs(struct page *page, int count)
+{
+	return likely(atomic_cmpxchg(&page->_count, count, 0) == count);
+}
+
+static inline void page_unfreeze_refs(struct page *page, int count)
+{
+	VM_BUG_ON(page_count(page) != 0);
+	VM_BUG_ON(count == 0);
+
+	atomic_set(&page->_count, count);
+}
+
+#ifdef CONFIG_NUMA
+extern struct page *__page_cache_alloc(gfp_t gfp);
+#else
+static inline struct page *__page_cache_alloc(gfp_t gfp)
+{
+	return alloc_pages(gfp, 0);
+}
+#endif
+
+static inline struct page *page_cache_alloc(struct address_space *x)
+{
+	return __page_cache_alloc(mapping_gfp_mask(x));
+}
+
+static inline struct page *page_cache_alloc_cold(struct address_space *x)
+{
+	return __page_cache_alloc(mapping_gfp_mask(x)|__GFP_COLD);
+}
+
+static inline struct page *page_cache_alloc_readahead(struct address_space *x)
+{
+	return __page_cache_alloc(mapping_gfp_mask(x) |
+				  __GFP_COLD | __GFP_NORETRY | __GFP_NOWARN);
+}
+
+typedef int filler_t(void *, struct page *);
+
+extern struct page * find_get_page(struct address_space *mapping,
+				pgoff_t index);
+extern struct page * find_lock_page(struct address_space *mapping,
+				pgoff_t index);
+extern struct page * find_or_create_page(struct address_space *mapping,
+				pgoff_t index, gfp_t gfp_mask);
+unsigned find_get_pages(struct address_space *mapping, pgoff_t start,
+			unsigned int nr_pages, struct page **pages);
+unsigned find_get_pages_contig(struct address_space *mapping, pgoff_t start,
+			       unsigned int nr_pages, struct page **pages);
+unsigned find_get_pages_tag(struct address_space *mapping, pgoff_t *index,
+			int tag, unsigned int nr_pages, struct page **pages);
+
+struct page *grab_cache_page_write_begin(struct address_space *mapping,
+			pgoff_t index, unsigned flags);
+
+/*
+ * Returns locked page at given index in given cache, creating it if needed.
+ */
+static inline struct page *grab_cache_page(struct address_space *mapping,
+								pgoff_t index)
+{
+	return find_or_create_page(mapping, index, mapping_gfp_mask(mapping));
+}
+
+extern struct page * grab_cache_page_nowait(struct address_space *mapping,
+				pgoff_t index);
+extern struct page * read_cache_page_async(struct address_space *mapping,
+				pgoff_t index, filler_t *filler, void *data);
+extern struct page * read_cache_page(struct address_space *mapping,
+				pgoff_t index, filler_t *filler, void *data);
+extern struct page * read_cache_page_gfp(struct address_space *mapping,
+				pgoff_t index, gfp_t gfp_mask);
+extern int read_cache_pages(struct address_space *mapping,
+		struct list_head *pages, filler_t *filler, void *data);
+
+static inline struct page *read_mapping_page_async(
+				struct address_space *mapping,
+				pgoff_t index, void *data)
+{
+	filler_t *filler = (filler_t *)mapping->a_ops->readpage;
+	return read_cache_page_async(mapping, index, filler, data);
+}
+
+static inline struct page *read_mapping_page(struct address_space *mapping,
+				pgoff_t index, void *data)
+{
+	filler_t *filler = (filler_t *)mapping->a_ops->readpage;
+	return read_cache_page(mapping, index, filler, data);
+}
+
+/*
+ * Return byte-offset into filesystem object for page.
+ */
+static inline loff_t page_offset(struct page *page)
+{
+	return ((loff_t)page->index) << PAGE_CACHE_SHIFT;
+}
+
+extern pgoff_t linear_hugepage_index(struct vm_area_struct *vma,
+				     unsigned long address);
+
+static inline pgoff_t linear_page_index(struct vm_area_struct *vma,
+					unsigned long address)
+{
+	pgoff_t pgoff;
+	if (unlikely(is_vm_hugetlb_page(vma)))
+		return linear_hugepage_index(vma, address);
+	pgoff = (address - vma->vm_start) >> PAGE_SHIFT;
+	pgoff += vma->vm_pgoff;
+	return pgoff >> (PAGE_CACHE_SHIFT - PAGE_SHIFT);
+}
+
+extern void __lock_page(struct page *page);
+extern int __lock_page_killable(struct page *page);
+extern int __lock_page_or_retry(struct page *page, struct mm_struct *mm,
+				unsigned int flags);
+extern void unlock_page(struct page *page);
+
+static inline void __set_page_locked(struct page *page)
+{
+	__set_bit(PG_locked, &page->flags);
+}
+
+static inline void __clear_page_locked(struct page *page)
+{
+	__clear_bit(PG_locked, &page->flags);
+}
+
+static inline int trylock_page(struct page *page)
+{
+	return (likely(!test_and_set_bit_lock(PG_locked, &page->flags)));
+}
+
+/*
+ * lock_page may only be called if we have the page's inode pinned.
+ */
+static inline void lock_page(struct page *page)
+{
+	might_sleep();
+	if (!trylock_page(page))
+		__lock_page(page);
+}
+
+/*
+ * lock_page_killable is like lock_page but can be interrupted by fatal
+ * signals.  It returns 0 if it locked the page and -EINTR if it was
+ * killed while waiting.
+ */
+static inline int lock_page_killable(struct page *page)
+{
+	might_sleep();
+	if (!trylock_page(page))
+		return __lock_page_killable(page);
+	return 0;
+}
+
+/*
+ * lock_page_or_retry - Lock the page, unless this would block and the
+ * caller indicated that it can handle a retry.
+ */
+static inline int lock_page_or_retry(struct page *page, struct mm_struct *mm,
+				     unsigned int flags)
+{
+	might_sleep();
+	return trylock_page(page) || __lock_page_or_retry(page, mm, flags);
+}
+
+/*
+ * This is exported only for wait_on_page_locked/wait_on_page_writeback.
+ * Never use this directly!
+ */
+extern void wait_on_page_bit(struct page *page, int bit_nr);
+
+extern int wait_on_page_bit_killable(struct page *page, int bit_nr);
+
+static inline int wait_on_page_locked_killable(struct page *page)
+{
+	if (PageLocked(page))
+		return wait_on_page_bit_killable(page, PG_locked);
+	return 0;
+}
+
+/* 
+ * Wait for a page to be unlocked.
+ *
+ * This must be called with the caller "holding" the page,
+ * ie with increased "page->count" so that the page won't
+ * go away during the wait..
+ */
+static inline void wait_on_page_locked(struct page *page)
+{
+	if (PageLocked(page))
+		wait_on_page_bit(page, PG_locked);
+}
+
+/* 
+ * Wait for a page to complete writeback
+ */
+static inline void wait_on_page_writeback(struct page *page)
+{
+	if (PageWriteback(page))
+		wait_on_page_bit(page, PG_writeback);
+}
+
+extern void end_page_writeback(struct page *page);
+
+/*
+ * Add an arbitrary waiter to a page's wait queue
+ */
+extern void add_page_wait_queue(struct page *page, wait_queue_t *waiter);
+
+/*
+ * Fault a userspace page into pagetables.  Return non-zero on a fault.
+ *
+ * This assumes that two userspace pages are always sufficient.  That's
+ * not true if PAGE_CACHE_SIZE > PAGE_SIZE.
+ */
+static inline int fault_in_pages_writeable(char __user *uaddr, int size)
+{
+	int ret;
+
+	if (unlikely(size == 0))
+		return 0;
+
+	/*
+	 * Writing zeroes into userspace here is OK, because we know that if
+	 * the zero gets there, we'll be overwriting it.
+	 */
+	ret = __put_user(0, uaddr);
+	if (ret == 0) {
+		char __user *end = uaddr + size - 1;
+
+		/*
+		 * If the page was already mapped, this will get a cache miss
+		 * for sure, so try to avoid doing it.
+		 */
+		if (((unsigned long)uaddr & PAGE_MASK) !=
+				((unsigned long)end & PAGE_MASK))
+		 	ret = __put_user(0, end);
+	}
+	return ret;
+}
+
+static inline int fault_in_pages_readable(const char __user *uaddr, int size)
+{
+	volatile char c;
+	int ret;
+
+	if (unlikely(size == 0))
+		return 0;
+
+	ret = __get_user(c, uaddr);
+	if (ret == 0) {
+		const char __user *end = uaddr + size - 1;
+
+		if (((unsigned long)uaddr & PAGE_MASK) !=
+				((unsigned long)end & PAGE_MASK)) {
+		 	ret = __get_user(c, end);
+			(void)c;
+		}
+	}
+	return ret;
+}
+
+int add_to_page_cache_locked(struct page *page, struct address_space *mapping,
+				pgoff_t index, gfp_t gfp_mask);
+int add_to_page_cache_lru(struct page *page, struct address_space *mapping,
+				pgoff_t index, gfp_t gfp_mask);
+extern void delete_from_page_cache(struct page *page);
+extern void __delete_from_page_cache(struct page *page);
+int replace_page_cache_page(struct page *old, struct page *new, gfp_t gfp_mask);
+
+/*
+ * Like add_to_page_cache_locked, but used to add newly allocated pages:
+ * the page is new, so we can just run __set_page_locked() against it.
+ */
+static inline int add_to_page_cache(struct page *page,
+		struct address_space *mapping, pgoff_t offset, gfp_t gfp_mask)
+{
+	int error;
+
+	__set_page_locked(page);
+	error = add_to_page_cache_locked(page, mapping, offset, gfp_mask);
+	if (unlikely(error))
+		__clear_page_locked(page);
+	return error;
+}
+
+#endif /* _LINUX_PAGEMAP_H */
diff --git a/include/linux/pagevec.h b/include/linux/pagevec.h
new file mode 100644
index 00000000..2aa12b84
--- /dev/null
+++ b/include/linux/pagevec.h
@@ -0,0 +1,99 @@
+/*
+ * include/linux/pagevec.h
+ *
+ * In many places it is efficient to batch an operation up against multiple
+ * pages.  A pagevec is a multipage container which is used for that.
+ */
+
+#ifndef _LINUX_PAGEVEC_H
+#define _LINUX_PAGEVEC_H
+
+/* 14 pointers + two long's align the pagevec structure to a power of two */
+#define PAGEVEC_SIZE	14
+
+struct page;
+struct address_space;
+
+struct pagevec {
+	unsigned long nr;
+	unsigned long cold;
+	struct page *pages[PAGEVEC_SIZE];
+};
+
+void __pagevec_release(struct pagevec *pvec);
+void __pagevec_lru_add(struct pagevec *pvec, enum lru_list lru);
+unsigned pagevec_lookup(struct pagevec *pvec, struct address_space *mapping,
+		pgoff_t start, unsigned nr_pages);
+unsigned pagevec_lookup_tag(struct pagevec *pvec,
+		struct address_space *mapping, pgoff_t *index, int tag,
+		unsigned nr_pages);
+
+static inline void pagevec_init(struct pagevec *pvec, int cold)
+{
+	pvec->nr = 0;
+	pvec->cold = cold;
+}
+
+static inline void pagevec_reinit(struct pagevec *pvec)
+{
+	pvec->nr = 0;
+}
+
+static inline unsigned pagevec_count(struct pagevec *pvec)
+{
+	return pvec->nr;
+}
+
+static inline unsigned pagevec_space(struct pagevec *pvec)
+{
+	return PAGEVEC_SIZE - pvec->nr;
+}
+
+/*
+ * Add a page to a pagevec.  Returns the number of slots still available.
+ */
+static inline unsigned pagevec_add(struct pagevec *pvec, struct page *page)
+{
+	pvec->pages[pvec->nr++] = page;
+	return pagevec_space(pvec);
+}
+
+static inline void pagevec_release(struct pagevec *pvec)
+{
+	if (pagevec_count(pvec))
+		__pagevec_release(pvec);
+}
+
+static inline void __pagevec_lru_add_anon(struct pagevec *pvec)
+{
+	__pagevec_lru_add(pvec, LRU_INACTIVE_ANON);
+}
+
+static inline void __pagevec_lru_add_active_anon(struct pagevec *pvec)
+{
+	__pagevec_lru_add(pvec, LRU_ACTIVE_ANON);
+}
+
+static inline void __pagevec_lru_add_file(struct pagevec *pvec)
+{
+	__pagevec_lru_add(pvec, LRU_INACTIVE_FILE);
+}
+
+static inline void __pagevec_lru_add_active_file(struct pagevec *pvec)
+{
+	__pagevec_lru_add(pvec, LRU_ACTIVE_FILE);
+}
+
+static inline void pagevec_lru_add_file(struct pagevec *pvec)
+{
+	if (pagevec_count(pvec))
+		__pagevec_lru_add_file(pvec);
+}
+
+static inline void pagevec_lru_add_anon(struct pagevec *pvec)
+{
+	if (pagevec_count(pvec))
+		__pagevec_lru_add_anon(pvec);
+}
+
+#endif /* _LINUX_PAGEVEC_H */
diff --git a/include/linux/param.h b/include/linux/param.h
new file mode 100644
index 00000000..092e92f6
--- /dev/null
+++ b/include/linux/param.h
@@ -0,0 +1,6 @@
+#ifndef _LINUX_PARAM_H
+#define _LINUX_PARAM_H
+
+#include <asm/param.h>
+
+#endif
diff --git a/include/linux/parport.h b/include/linux/parport.h
new file mode 100644
index 00000000..106c2ca9
--- /dev/null
+++ b/include/linux/parport.h
@@ -0,0 +1,568 @@
+/*
+ * Any part of this program may be used in documents licensed under
+ * the GNU Free Documentation License, Version 1.1 or any later version
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _PARPORT_H_
+#define _PARPORT_H_
+
+/* Start off with user-visible constants */
+
+/* Maximum of 16 ports per machine */
+#define PARPORT_MAX  16
+
+/* Magic numbers */
+#define PARPORT_IRQ_NONE  -1
+#define PARPORT_DMA_NONE  -1
+#define PARPORT_IRQ_AUTO  -2
+#define PARPORT_DMA_AUTO  -2
+#define PARPORT_DMA_NOFIFO -3
+#define PARPORT_DISABLE   -2
+#define PARPORT_IRQ_PROBEONLY -3
+#define PARPORT_IOHI_AUTO -1
+
+#define PARPORT_CONTROL_STROBE    0x1
+#define PARPORT_CONTROL_AUTOFD    0x2
+#define PARPORT_CONTROL_INIT      0x4
+#define PARPORT_CONTROL_SELECT    0x8
+
+#define PARPORT_STATUS_ERROR      0x8
+#define PARPORT_STATUS_SELECT     0x10
+#define PARPORT_STATUS_PAPEROUT   0x20
+#define PARPORT_STATUS_ACK        0x40
+#define PARPORT_STATUS_BUSY       0x80
+
+/* Type classes for Plug-and-Play probe.  */
+typedef enum {
+	PARPORT_CLASS_LEGACY = 0,       /* Non-IEEE1284 device */
+	PARPORT_CLASS_PRINTER,
+	PARPORT_CLASS_MODEM,
+	PARPORT_CLASS_NET,
+	PARPORT_CLASS_HDC,              /* Hard disk controller */
+	PARPORT_CLASS_PCMCIA,
+	PARPORT_CLASS_MEDIA,            /* Multimedia device */
+	PARPORT_CLASS_FDC,              /* Floppy disk controller */
+	PARPORT_CLASS_PORTS,
+	PARPORT_CLASS_SCANNER,
+	PARPORT_CLASS_DIGCAM,
+	PARPORT_CLASS_OTHER,            /* Anything else */
+	PARPORT_CLASS_UNSPEC,           /* No CLS field in ID */
+	PARPORT_CLASS_SCSIADAPTER
+} parport_device_class;
+
+/* The "modes" entry in parport is a bit field representing the
+   capabilities of the hardware. */
+#define PARPORT_MODE_PCSPP	(1<<0) /* IBM PC registers available. */
+#define PARPORT_MODE_TRISTATE	(1<<1) /* Can tristate. */
+#define PARPORT_MODE_EPP	(1<<2) /* Hardware EPP. */
+#define PARPORT_MODE_ECP	(1<<3) /* Hardware ECP. */
+#define PARPORT_MODE_COMPAT	(1<<4) /* Hardware 'printer protocol'. */
+#define PARPORT_MODE_DMA	(1<<5) /* Hardware can DMA. */
+#define PARPORT_MODE_SAFEININT	(1<<6) /* SPP registers accessible in IRQ. */
+
+/* IEEE1284 modes: 
+   Nibble mode, byte mode, ECP, ECPRLE and EPP are their own
+   'extensibility request' values.  Others are special.
+   'Real' ECP modes must have the IEEE1284_MODE_ECP bit set.  */
+#define IEEE1284_MODE_NIBBLE             0
+#define IEEE1284_MODE_BYTE              (1<<0)
+#define IEEE1284_MODE_COMPAT            (1<<8)
+#define IEEE1284_MODE_BECP              (1<<9) /* Bounded ECP mode */
+#define IEEE1284_MODE_ECP               (1<<4)
+#define IEEE1284_MODE_ECPRLE            (IEEE1284_MODE_ECP | (1<<5))
+#define IEEE1284_MODE_ECPSWE            (1<<10) /* Software-emulated */
+#define IEEE1284_MODE_EPP               (1<<6)
+#define IEEE1284_MODE_EPPSL             (1<<11) /* EPP 1.7 */
+#define IEEE1284_MODE_EPPSWE            (1<<12) /* Software-emulated */
+#define IEEE1284_DEVICEID               (1<<2)  /* This is a flag */
+#define IEEE1284_EXT_LINK               (1<<14) /* This flag causes the
+						 * extensibility link to
+						 * be requested, using
+						 * bits 0-6. */
+
+/* For the benefit of parport_read/write, you can use these with
+ * parport_negotiate to use address operations.  They have no effect
+ * other than to make parport_read/write use address transfers. */
+#define IEEE1284_ADDR			(1<<13)	/* This is a flag */
+#define IEEE1284_DATA			 0	/* So is this */
+
+/* Flags for block transfer operations. */
+#define PARPORT_EPP_FAST		(1<<0) /* Unreliable counts. */
+#define PARPORT_W91284PIC		(1<<1) /* have a Warp9 w91284pic in the device */
+
+/* The rest is for the kernel only */
+#ifdef __KERNEL__
+
+#include <linux/jiffies.h>
+#include <linux/proc_fs.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/irqreturn.h>
+#include <linux/semaphore.h>
+#include <asm/ptrace.h>
+
+/* Define this later. */
+struct parport;
+struct pardevice;
+
+struct pc_parport_state {
+	unsigned int ctr;
+	unsigned int ecr;
+};
+
+struct ax_parport_state {
+	unsigned int ctr;
+	unsigned int ecr;
+	unsigned int dcsr;
+};
+
+/* used by both parport_amiga and parport_mfc3 */
+struct amiga_parport_state {
+       unsigned char data;     /* ciaa.prb */
+       unsigned char datadir;  /* ciaa.ddrb */
+       unsigned char status;   /* ciab.pra & 7 */
+       unsigned char statusdir;/* ciab.ddrb & 7 */
+};
+
+struct ax88796_parport_state {
+	unsigned char cpr;
+};
+
+struct ip32_parport_state {
+	unsigned int dcr;
+	unsigned int ecr;
+};
+
+struct parport_state {
+	union {
+		struct pc_parport_state pc;
+		/* ARC has no state. */
+		struct ax_parport_state ax;
+		struct amiga_parport_state amiga;
+		struct ax88796_parport_state ax88796;
+		/* Atari has not state. */
+		struct ip32_parport_state ip32;
+		void *misc; 
+	} u;
+};
+
+struct parport_operations {
+	/* IBM PC-style virtual registers. */
+	void (*write_data)(struct parport *, unsigned char);
+	unsigned char (*read_data)(struct parport *);
+
+	void (*write_control)(struct parport *, unsigned char);
+	unsigned char (*read_control)(struct parport *);
+	unsigned char (*frob_control)(struct parport *, unsigned char mask,
+				      unsigned char val);
+
+	unsigned char (*read_status)(struct parport *);
+
+	/* IRQs. */
+	void (*enable_irq)(struct parport *);
+	void (*disable_irq)(struct parport *);
+
+	/* Data direction. */
+	void (*data_forward) (struct parport *);
+	void (*data_reverse) (struct parport *);
+
+	/* For core parport code. */
+	void (*init_state)(struct pardevice *, struct parport_state *);
+	void (*save_state)(struct parport *, struct parport_state *);
+	void (*restore_state)(struct parport *, struct parport_state *);
+
+	/* Block read/write */
+	size_t (*epp_write_data) (struct parport *port, const void *buf,
+				  size_t len, int flags);
+	size_t (*epp_read_data) (struct parport *port, void *buf, size_t len,
+				 int flags);
+	size_t (*epp_write_addr) (struct parport *port, const void *buf,
+				  size_t len, int flags);
+	size_t (*epp_read_addr) (struct parport *port, void *buf, size_t len,
+				 int flags);
+
+	size_t (*ecp_write_data) (struct parport *port, const void *buf,
+				  size_t len, int flags);
+	size_t (*ecp_read_data) (struct parport *port, void *buf, size_t len,
+				 int flags);
+	size_t (*ecp_write_addr) (struct parport *port, const void *buf,
+				  size_t len, int flags);
+
+	size_t (*compat_write_data) (struct parport *port, const void *buf,
+				     size_t len, int flags);
+	size_t (*nibble_read_data) (struct parport *port, void *buf,
+				    size_t len, int flags);
+	size_t (*byte_read_data) (struct parport *port, void *buf,
+				  size_t len, int flags);
+	struct module *owner;
+};
+
+struct parport_device_info {
+	parport_device_class class;
+	const char *class_name;
+	const char *mfr;
+	const char *model;
+	const char *cmdset;
+	const char *description;
+};
+
+/* Each device can have two callback functions:
+ *  1) a preemption function, called by the resource manager to request
+ *     that the driver relinquish control of the port.  The driver should
+ *     return zero if it agrees to release the port, and nonzero if it 
+ *     refuses.  Do not call parport_release() - the kernel will do this
+ *     implicitly.
+ *
+ *  2) a wake-up function, called by the resource manager to tell drivers
+ *     that the port is available to be claimed.  If a driver wants to use
+ *     the port, it should call parport_claim() here.
+ */
+
+/* A parallel port device */
+struct pardevice {
+	const char *name;
+	struct parport *port;
+	int daisy;
+	int (*preempt)(void *);
+	void (*wakeup)(void *);
+	void *private;
+	void (*irq_func)(void *);
+	unsigned int flags;
+	struct pardevice *next;
+	struct pardevice *prev;
+	struct parport_state *state;     /* saved status over preemption */
+	wait_queue_head_t wait_q;
+	unsigned long int time;
+	unsigned long int timeslice;
+	volatile long int timeout;
+	unsigned long waiting;		 /* long req'd for set_bit --RR */
+	struct pardevice *waitprev;
+	struct pardevice *waitnext;
+	void * sysctl_table;
+};
+
+/* IEEE1284 information */
+
+/* IEEE1284 phases. These are exposed to userland through ppdev IOCTL
+ * PP[GS]ETPHASE, so do not change existing values. */
+enum ieee1284_phase {
+	IEEE1284_PH_FWD_DATA,
+	IEEE1284_PH_FWD_IDLE,
+	IEEE1284_PH_TERMINATE,
+	IEEE1284_PH_NEGOTIATION,
+	IEEE1284_PH_HBUSY_DNA,
+	IEEE1284_PH_REV_IDLE,
+	IEEE1284_PH_HBUSY_DAVAIL,
+	IEEE1284_PH_REV_DATA,
+	IEEE1284_PH_ECP_SETUP,
+	IEEE1284_PH_ECP_FWD_TO_REV,
+	IEEE1284_PH_ECP_REV_TO_FWD,
+	IEEE1284_PH_ECP_DIR_UNKNOWN,
+};
+struct ieee1284_info {
+	int mode;
+	volatile enum ieee1284_phase phase;
+	struct semaphore irq;
+};
+
+/* A parallel port */
+struct parport {
+	unsigned long base;	/* base address */
+	unsigned long base_hi;  /* base address (hi - ECR) */
+	unsigned int size;	/* IO extent */
+	const char *name;
+	unsigned int modes;
+	int irq;		/* interrupt (or -1 for none) */
+	int dma;
+	int muxport;		/* which muxport (if any) this is */
+	int portnum;		/* which physical parallel port (not mux) */
+	struct device *dev;	/* Physical device associated with IO/DMA.
+				 * This may unfortulately be null if the
+				 * port has a legacy driver.
+				 */
+
+	struct parport *physport;
+				/* If this is a non-default mux
+				   parport, i.e. we're a clone of a real
+				   physical port, this is a pointer to that
+				   port. The locking is only done in the
+				   real port.  For a clone port, the
+				   following structure members are
+				   meaningless: devices, cad, muxsel,
+				   waithead, waittail, flags, pdir,
+				   dev, ieee1284, *_lock.
+
+				   It this is a default mux parport, or
+				   there is no mux involved, this points to
+				   ourself. */
+
+	struct pardevice *devices;
+	struct pardevice *cad;	/* port owner */
+	int daisy;		/* currently selected daisy addr */
+	int muxsel;		/* currently selected mux port */
+
+	struct pardevice *waithead;
+	struct pardevice *waittail;
+
+	struct list_head list;
+	unsigned int flags;
+
+	void *sysctl_table;
+	struct parport_device_info probe_info[5]; /* 0-3 + non-IEEE1284.3 */
+	struct ieee1284_info ieee1284;
+
+	struct parport_operations *ops;
+	void *private_data;     /* for lowlevel driver */
+
+	int number;		/* port index - the `n' in `parportn' */
+	spinlock_t pardevice_lock;
+	spinlock_t waitlist_lock;
+	rwlock_t cad_lock;
+
+	int spintime;
+	atomic_t ref_count;
+
+	unsigned long devflags;
+#define PARPORT_DEVPROC_REGISTERED	0
+	struct pardevice *proc_device;	/* Currently register proc device */
+
+	struct list_head full_list;
+	struct parport *slaves[3];
+};
+
+#define DEFAULT_SPIN_TIME 500 /* us */
+
+struct parport_driver {
+	const char *name;
+	void (*attach) (struct parport *);
+	void (*detach) (struct parport *);
+	struct list_head list;
+};
+
+/* parport_register_port registers a new parallel port at the given
+   address (if one does not already exist) and returns a pointer to it.
+   This entails claiming the I/O region, IRQ and DMA.  NULL is returned
+   if initialisation fails. */
+struct parport *parport_register_port(unsigned long base, int irq, int dma,
+				      struct parport_operations *ops);
+
+/* Once a registered port is ready for high-level drivers to use, the
+   low-level driver that registered it should announce it.  This will
+   call the high-level drivers' attach() functions (after things like
+   determining the IEEE 1284.3 topology of the port and collecting
+   DeviceIDs). */
+void parport_announce_port (struct parport *port);
+
+/* Unregister a port. */
+extern void parport_remove_port(struct parport *port);
+
+/* Register a new high-level driver. */
+extern int parport_register_driver (struct parport_driver *);
+
+/* Unregister a high-level driver. */
+extern void parport_unregister_driver (struct parport_driver *);
+
+/* If parport_register_driver doesn't fit your needs, perhaps
+ * parport_find_xxx does. */
+extern struct parport *parport_find_number (int);
+extern struct parport *parport_find_base (unsigned long);
+
+/* generic irq handler, if it suits your needs */
+extern irqreturn_t parport_irq_handler(int irq, void *dev_id);
+
+/* Reference counting for ports. */
+extern struct parport *parport_get_port (struct parport *);
+extern void parport_put_port (struct parport *);
+
+/* parport_register_device declares that a device is connected to a
+   port, and tells the kernel all it needs to know.
+   - pf is the preemption function (may be NULL for no callback)
+   - kf is the wake-up function (may be NULL for no callback)
+   - irq_func is the interrupt handler (may be NULL for no interrupts)
+   - handle is a user pointer that gets handed to callback functions.  */
+struct pardevice *parport_register_device(struct parport *port, 
+			  const char *name,
+			  int (*pf)(void *), void (*kf)(void *),
+			  void (*irq_func)(void *), 
+			  int flags, void *handle);
+
+/* parport_unregister unlinks a device from the chain. */
+extern void parport_unregister_device(struct pardevice *dev);
+
+/* parport_claim tries to gain ownership of the port for a particular
+   driver.  This may fail (return non-zero) if another driver is busy.
+   If this driver has registered an interrupt handler, it will be
+   enabled.  */
+extern int parport_claim(struct pardevice *dev);
+
+/* parport_claim_or_block is the same, but sleeps if the port cannot
+   be claimed.  Return value is 1 if it slept, 0 normally and -errno
+   on error.  */
+extern int parport_claim_or_block(struct pardevice *dev);
+
+/* parport_release reverses a previous parport_claim.  This can never
+   fail, though the effects are undefined (except that they are bad)
+   if you didn't previously own the port.  Once you have released the
+   port you should make sure that neither your code nor the hardware
+   on the port tries to initiate any communication without first
+   re-claiming the port.  If you mess with the port state (enabling
+   ECP for example) you should clean up before releasing the port. */
+
+extern void parport_release(struct pardevice *dev);
+
+/**
+ * parport_yield - relinquish a parallel port temporarily
+ * @dev: a device on the parallel port
+ *
+ * This function relinquishes the port if it would be helpful to other
+ * drivers to do so.  Afterwards it tries to reclaim the port using
+ * parport_claim(), and the return value is the same as for
+ * parport_claim().  If it fails, the port is left unclaimed and it is
+ * the driver's responsibility to reclaim the port.
+ *
+ * The parport_yield() and parport_yield_blocking() functions are for
+ * marking points in the driver at which other drivers may claim the
+ * port and use their devices.  Yielding the port is similar to
+ * releasing it and reclaiming it, but is more efficient because no
+ * action is taken if there are no other devices needing the port.  In
+ * fact, nothing is done even if there are other devices waiting but
+ * the current device is still within its "timeslice".  The default
+ * timeslice is half a second, but it can be adjusted via the /proc
+ * interface.
+ **/
+static __inline__ int parport_yield(struct pardevice *dev)
+{
+	unsigned long int timeslip = (jiffies - dev->time);
+	if ((dev->port->waithead == NULL) || (timeslip < dev->timeslice))
+		return 0;
+	parport_release(dev);
+	return parport_claim(dev);
+}
+
+/**
+ * parport_yield_blocking - relinquish a parallel port temporarily
+ * @dev: a device on the parallel port
+ *
+ * This function relinquishes the port if it would be helpful to other
+ * drivers to do so.  Afterwards it tries to reclaim the port using
+ * parport_claim_or_block(), and the return value is the same as for
+ * parport_claim_or_block().
+ **/
+static __inline__ int parport_yield_blocking(struct pardevice *dev)
+{
+	unsigned long int timeslip = (jiffies - dev->time);
+	if ((dev->port->waithead == NULL) || (timeslip < dev->timeslice))
+		return 0;
+	parport_release(dev);
+	return parport_claim_or_block(dev);
+}
+
+/* Flags used to identify what a device does. */
+#define PARPORT_DEV_TRAN		0	/* WARNING !! DEPRECATED !! */
+#define PARPORT_DEV_LURK		(1<<0)	/* WARNING !! DEPRECATED !! */
+#define PARPORT_DEV_EXCL		(1<<1)	/* Need exclusive access. */
+
+#define PARPORT_FLAG_EXCL		(1<<1)	/* EXCL driver registered. */
+
+/* IEEE1284 functions */
+extern void parport_ieee1284_interrupt (void *);
+extern int parport_negotiate (struct parport *, int mode);
+extern ssize_t parport_write (struct parport *, const void *buf, size_t len);
+extern ssize_t parport_read (struct parport *, void *buf, size_t len);
+
+#define PARPORT_INACTIVITY_O_NONBLOCK 1
+extern long parport_set_timeout (struct pardevice *, long inactivity);
+
+extern int parport_wait_event (struct parport *, long timeout);
+extern int parport_wait_peripheral (struct parport *port,
+				    unsigned char mask,
+				    unsigned char val);
+extern int parport_poll_peripheral (struct parport *port,
+				    unsigned char mask,
+				    unsigned char val,
+				    int usec);
+
+/* For architectural drivers */
+extern size_t parport_ieee1284_write_compat (struct parport *,
+					     const void *, size_t, int);
+extern size_t parport_ieee1284_read_nibble (struct parport *,
+					    void *, size_t, int);
+extern size_t parport_ieee1284_read_byte (struct parport *,
+					  void *, size_t, int);
+extern size_t parport_ieee1284_ecp_read_data (struct parport *,
+					      void *, size_t, int);
+extern size_t parport_ieee1284_ecp_write_data (struct parport *,
+					       const void *, size_t, int);
+extern size_t parport_ieee1284_ecp_write_addr (struct parport *,
+					       const void *, size_t, int);
+extern size_t parport_ieee1284_epp_write_data (struct parport *,
+					       const void *, size_t, int);
+extern size_t parport_ieee1284_epp_read_data (struct parport *,
+					      void *, size_t, int);
+extern size_t parport_ieee1284_epp_write_addr (struct parport *,
+					       const void *, size_t, int);
+extern size_t parport_ieee1284_epp_read_addr (struct parport *,
+					      void *, size_t, int);
+
+/* IEEE1284.3 functions */
+extern int parport_daisy_init (struct parport *port);
+extern void parport_daisy_fini (struct parport *port);
+extern struct pardevice *parport_open (int devnum, const char *name);
+extern void parport_close (struct pardevice *dev);
+extern ssize_t parport_device_id (int devnum, char *buffer, size_t len);
+extern void parport_daisy_deselect_all (struct parport *port);
+extern int parport_daisy_select (struct parport *port, int daisy, int mode);
+
+/* Lowlevel drivers _can_ call this support function to handle irqs.  */
+static inline void parport_generic_irq(struct parport *port)
+{
+	parport_ieee1284_interrupt (port);
+	read_lock(&port->cad_lock);
+	if (port->cad && port->cad->irq_func)
+		port->cad->irq_func(port->cad->private);
+	read_unlock(&port->cad_lock);
+}
+
+/* Prototypes from parport_procfs */
+extern int parport_proc_register(struct parport *pp);
+extern int parport_proc_unregister(struct parport *pp);
+extern int parport_device_proc_register(struct pardevice *device);
+extern int parport_device_proc_unregister(struct pardevice *device);
+
+/* If PC hardware is the only type supported, we can optimise a bit.  */
+#if !defined(CONFIG_PARPORT_NOT_PC)
+
+#include <linux/parport_pc.h>
+#define parport_write_data(p,x)            parport_pc_write_data(p,x)
+#define parport_read_data(p)               parport_pc_read_data(p)
+#define parport_write_control(p,x)         parport_pc_write_control(p,x)
+#define parport_read_control(p)            parport_pc_read_control(p)
+#define parport_frob_control(p,m,v)        parport_pc_frob_control(p,m,v)
+#define parport_read_status(p)             parport_pc_read_status(p)
+#define parport_enable_irq(p)              parport_pc_enable_irq(p)
+#define parport_disable_irq(p)             parport_pc_disable_irq(p)
+#define parport_data_forward(p)            parport_pc_data_forward(p)
+#define parport_data_reverse(p)            parport_pc_data_reverse(p)
+
+#else  /*  !CONFIG_PARPORT_NOT_PC  */
+
+/* Generic operations vector through the dispatch table. */
+#define parport_write_data(p,x)            (p)->ops->write_data(p,x)
+#define parport_read_data(p)               (p)->ops->read_data(p)
+#define parport_write_control(p,x)         (p)->ops->write_control(p,x)
+#define parport_read_control(p)            (p)->ops->read_control(p)
+#define parport_frob_control(p,m,v)        (p)->ops->frob_control(p,m,v)
+#define parport_read_status(p)             (p)->ops->read_status(p)
+#define parport_enable_irq(p)              (p)->ops->enable_irq(p)
+#define parport_disable_irq(p)             (p)->ops->disable_irq(p)
+#define parport_data_forward(p)            (p)->ops->data_forward(p)
+#define parport_data_reverse(p)            (p)->ops->data_reverse(p)
+
+#endif /*  !CONFIG_PARPORT_NOT_PC  */
+
+extern unsigned long parport_default_timeslice;
+extern int parport_default_spintime;
+
+#endif /* __KERNEL__ */
+#endif /* _PARPORT_H_ */
diff --git a/include/linux/parport_pc.h b/include/linux/parport_pc.h
new file mode 100644
index 00000000..cc1767f5
--- /dev/null
+++ b/include/linux/parport_pc.h
@@ -0,0 +1,238 @@
+#ifndef __LINUX_PARPORT_PC_H
+#define __LINUX_PARPORT_PC_H
+
+#include <asm/io.h>
+
+/* --- register definitions ------------------------------- */
+
+#define ECONTROL(p) ((p)->base_hi + 0x2)
+#define CONFIGB(p)  ((p)->base_hi + 0x1)
+#define CONFIGA(p)  ((p)->base_hi + 0x0)
+#define FIFO(p)     ((p)->base_hi + 0x0)
+#define EPPDATA(p)  ((p)->base    + 0x4)
+#define EPPADDR(p)  ((p)->base    + 0x3)
+#define CONTROL(p)  ((p)->base    + 0x2)
+#define STATUS(p)   ((p)->base    + 0x1)
+#define DATA(p)     ((p)->base    + 0x0)
+
+struct parport_pc_private {
+	/* Contents of CTR. */
+	unsigned char ctr;
+
+	/* Bitmask of writable CTR bits. */
+	unsigned char ctr_writable;
+
+	/* Whether or not there's an ECR. */
+	int ecr;
+
+	/* Number of PWords that FIFO will hold. */
+	int fifo_depth;
+
+	/* Number of bytes per portword. */
+	int pword;
+
+	/* Not used yet. */
+	int readIntrThreshold;
+	int writeIntrThreshold;
+
+	/* buffer suitable for DMA, if DMA enabled */
+	char *dma_buf;
+	dma_addr_t dma_handle;
+	struct list_head list;
+	struct parport *port;
+};
+
+struct parport_pc_via_data
+{
+	/* ISA PnP IRQ routing register 1 */
+	u8 via_pci_parport_irq_reg;
+	/* ISA PnP DMA request routing register */
+	u8 via_pci_parport_dma_reg;
+	/* Register and value to enable SuperIO configuration access */
+	u8 via_pci_superio_config_reg;
+	u8 via_pci_superio_config_data;
+	/* SuperIO function register number */
+	u8 viacfg_function;
+	/* parallel port control register number */
+	u8 viacfg_parport_control;
+	/* Parallel port base address register */
+	u8 viacfg_parport_base;
+};
+
+static __inline__ void parport_pc_write_data(struct parport *p, unsigned char d)
+{
+#ifdef DEBUG_PARPORT
+	printk (KERN_DEBUG "parport_pc_write_data(%p,0x%02x)\n", p, d);
+#endif
+	outb(d, DATA(p));
+}
+
+static __inline__ unsigned char parport_pc_read_data(struct parport *p)
+{
+	unsigned char val = inb (DATA (p));
+#ifdef DEBUG_PARPORT
+	printk (KERN_DEBUG "parport_pc_read_data(%p) = 0x%02x\n",
+		p, val);
+#endif
+	return val;
+}
+
+#ifdef DEBUG_PARPORT
+static inline void dump_parport_state (char *str, struct parport *p)
+{
+	/* here's hoping that reading these ports won't side-effect anything underneath */
+	unsigned char ecr = inb (ECONTROL (p));
+	unsigned char dcr = inb (CONTROL (p));
+	unsigned char dsr = inb (STATUS (p));
+	static const char *const ecr_modes[] = {"SPP", "PS2", "PPFIFO", "ECP", "xXx", "yYy", "TST", "CFG"};
+	const struct parport_pc_private *priv = p->physport->private_data;
+	int i;
+
+	printk (KERN_DEBUG "*** parport state (%s): ecr=[%s", str, ecr_modes[(ecr & 0xe0) >> 5]);
+	if (ecr & 0x10) printk (",nErrIntrEn");
+	if (ecr & 0x08) printk (",dmaEn");
+	if (ecr & 0x04) printk (",serviceIntr");
+	if (ecr & 0x02) printk (",f_full");
+	if (ecr & 0x01) printk (",f_empty");
+	for (i=0; i<2; i++) {
+		printk ("]  dcr(%s)=[", i ? "soft" : "hard");
+		dcr = i ? priv->ctr : inb (CONTROL (p));
+	
+		if (dcr & 0x20) {
+			printk ("rev");
+		} else {
+			printk ("fwd");
+		}
+		if (dcr & 0x10) printk (",ackIntEn");
+		if (!(dcr & 0x08)) printk (",N-SELECT-IN");
+		if (dcr & 0x04) printk (",N-INIT");
+		if (!(dcr & 0x02)) printk (",N-AUTOFD");
+		if (!(dcr & 0x01)) printk (",N-STROBE");
+	}
+	printk ("]  dsr=[");
+	if (!(dsr & 0x80)) printk ("BUSY");
+	if (dsr & 0x40) printk (",N-ACK");
+	if (dsr & 0x20) printk (",PERROR");
+	if (dsr & 0x10) printk (",SELECT");
+	if (dsr & 0x08) printk (",N-FAULT");
+	printk ("]\n");
+	return;
+}
+#else	/* !DEBUG_PARPORT */
+#define dump_parport_state(args...)
+#endif	/* !DEBUG_PARPORT */
+
+/* __parport_pc_frob_control differs from parport_pc_frob_control in that
+ * it doesn't do any extra masking. */
+static __inline__ unsigned char __parport_pc_frob_control (struct parport *p,
+							   unsigned char mask,
+							   unsigned char val)
+{
+	struct parport_pc_private *priv = p->physport->private_data;
+	unsigned char ctr = priv->ctr;
+#ifdef DEBUG_PARPORT
+	printk (KERN_DEBUG
+		"__parport_pc_frob_control(%02x,%02x): %02x -> %02x\n",
+		mask, val, ctr, ((ctr & ~mask) ^ val) & priv->ctr_writable);
+#endif
+	ctr = (ctr & ~mask) ^ val;
+	ctr &= priv->ctr_writable; /* only write writable bits. */
+	outb (ctr, CONTROL (p));
+	priv->ctr = ctr;	/* Update soft copy */
+	return ctr;
+}
+
+static __inline__ void parport_pc_data_reverse (struct parport *p)
+{
+	__parport_pc_frob_control (p, 0x20, 0x20);
+}
+
+static __inline__ void parport_pc_data_forward (struct parport *p)
+{
+	__parport_pc_frob_control (p, 0x20, 0x00);
+}
+
+static __inline__ void parport_pc_write_control (struct parport *p,
+						 unsigned char d)
+{
+	const unsigned char wm = (PARPORT_CONTROL_STROBE |
+				  PARPORT_CONTROL_AUTOFD |
+				  PARPORT_CONTROL_INIT |
+				  PARPORT_CONTROL_SELECT);
+
+	/* Take this out when drivers have adapted to newer interface. */
+	if (d & 0x20) {
+		printk (KERN_DEBUG "%s (%s): use data_reverse for this!\n",
+			p->name, p->cad->name);
+		parport_pc_data_reverse (p);
+	}
+
+	__parport_pc_frob_control (p, wm, d & wm);
+}
+
+static __inline__ unsigned char parport_pc_read_control(struct parport *p)
+{
+	const unsigned char rm = (PARPORT_CONTROL_STROBE |
+				  PARPORT_CONTROL_AUTOFD |
+				  PARPORT_CONTROL_INIT |
+				  PARPORT_CONTROL_SELECT);
+	const struct parport_pc_private *priv = p->physport->private_data;
+	return priv->ctr & rm; /* Use soft copy */
+}
+
+static __inline__ unsigned char parport_pc_frob_control (struct parport *p,
+							 unsigned char mask,
+							 unsigned char val)
+{
+	const unsigned char wm = (PARPORT_CONTROL_STROBE |
+				  PARPORT_CONTROL_AUTOFD |
+				  PARPORT_CONTROL_INIT |
+				  PARPORT_CONTROL_SELECT);
+
+	/* Take this out when drivers have adapted to newer interface. */
+	if (mask & 0x20) {
+		printk (KERN_DEBUG "%s (%s): use data_%s for this!\n",
+			p->name, p->cad->name,
+			(val & 0x20) ? "reverse" : "forward");
+		if (val & 0x20)
+			parport_pc_data_reverse (p);
+		else
+			parport_pc_data_forward (p);
+	}
+
+	/* Restrict mask and val to control lines. */
+	mask &= wm;
+	val &= wm;
+
+	return __parport_pc_frob_control (p, mask, val);
+}
+
+static __inline__ unsigned char parport_pc_read_status(struct parport *p)
+{
+	return inb(STATUS(p));
+}
+
+
+static __inline__ void parport_pc_disable_irq(struct parport *p)
+{
+	__parport_pc_frob_control (p, 0x10, 0x00);
+}
+
+static __inline__ void parport_pc_enable_irq(struct parport *p)
+{
+	__parport_pc_frob_control (p, 0x10, 0x10);
+}
+
+extern void parport_pc_release_resources(struct parport *p);
+
+extern int parport_pc_claim_resources(struct parport *p);
+
+/* PCMCIA code will want to get us to look at a port.  Provide a mechanism. */
+extern struct parport *parport_pc_probe_port(unsigned long base,
+					     unsigned long base_hi,
+					     int irq, int dma,
+					     struct device *dev,
+					     int irqflags);
+extern void parport_pc_unregister_port(struct parport *p);
+
+#endif
diff --git a/include/linux/parser.h b/include/linux/parser.h
new file mode 100644
index 00000000..ea2281e7
--- /dev/null
+++ b/include/linux/parser.h
@@ -0,0 +1,33 @@
+/*
+ * linux/include/linux/parser.h
+ *
+ * Header for lib/parser.c
+ * Intended use of these functions is parsing filesystem argument lists,
+ * but could potentially be used anywhere else that simple option=arg
+ * parsing is required.
+ */
+
+
+/* associates an integer enumerator with a pattern string. */
+struct match_token {
+	int token;
+	const char *pattern;
+};
+
+typedef struct match_token match_table_t[];
+
+/* Maximum number of arguments that match_token will find in a pattern */
+enum {MAX_OPT_ARGS = 3};
+
+/* Describe the location within a string of a substring */
+typedef struct {
+	char *from;
+	char *to;
+} substring_t;
+
+int match_token(char *, const match_table_t table, substring_t args[]);
+int match_int(substring_t *, int *result);
+int match_octal(substring_t *, int *result);
+int match_hex(substring_t *, int *result);
+size_t match_strlcpy(char *, const substring_t *, size_t);
+char *match_strdup(const substring_t *);
diff --git a/include/linux/pata_arasan_cf_data.h b/include/linux/pata_arasan_cf_data.h
new file mode 100644
index 00000000..a6ee9aa8
--- /dev/null
+++ b/include/linux/pata_arasan_cf_data.h
@@ -0,0 +1,49 @@
+/*
+ * include/linux/pata_arasan_cf_data.h
+ *
+ * Arasan Compact Flash host controller platform data header file
+ *
+ * Copyright (C) 2011 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _PATA_ARASAN_CF_DATA_H
+#define _PATA_ARASAN_CF_DATA_H
+
+#include <linux/platform_device.h>
+
+struct arasan_cf_pdata {
+	u8 cf_if_clk;
+	#define CF_IF_CLK_100M			(0x0)
+	#define CF_IF_CLK_75M			(0x1)
+	#define CF_IF_CLK_66M			(0x2)
+	#define CF_IF_CLK_50M			(0x3)
+	#define CF_IF_CLK_40M			(0x4)
+	#define CF_IF_CLK_33M			(0x5)
+	#define CF_IF_CLK_25M			(0x6)
+	#define CF_IF_CLK_125M			(0x7)
+	#define CF_IF_CLK_150M			(0x8)
+	#define CF_IF_CLK_166M			(0x9)
+	#define CF_IF_CLK_200M			(0xA)
+	/*
+	 * Platform specific incapabilities of CF controller is handled via
+	 * quirks
+	 */
+	u32 quirk;
+	#define CF_BROKEN_PIO			(1)
+	#define CF_BROKEN_MWDMA			(1 << 1)
+	#define CF_BROKEN_UDMA			(1 << 2)
+	/* This is platform specific data for the DMA controller */
+	void *dma_priv;
+};
+
+static inline void
+set_arasan_cf_pdata(struct platform_device *pdev, struct arasan_cf_pdata *data)
+{
+	pdev->dev.platform_data = data;
+}
+#endif /* _PATA_ARASAN_CF_DATA_H */
diff --git a/include/linux/patchkey.h b/include/linux/patchkey.h
new file mode 100644
index 00000000..aefda0ec
--- /dev/null
+++ b/include/linux/patchkey.h
@@ -0,0 +1,47 @@
+/*
+ * <linux/patchkey.h> -- definition of _PATCHKEY macro
+ *
+ * Copyright (C) 2005 Stuart Brady
+ *
+ * This exists because awe_voice.h defined its own _PATCHKEY and it wasn't
+ * clear whether removing this would break anything in userspace.
+ *
+ * Do not include this file directly.  Please use <sys/soundcard.h> instead.
+ * For kernel code, use <linux/soundcard.h>
+ */
+
+#ifndef _LINUX_PATCHKEY_H_INDIRECT
+#error "patchkey.h included directly"
+#endif
+
+#ifndef _LINUX_PATCHKEY_H
+#define _LINUX_PATCHKEY_H
+
+/* Endian macros. */
+#ifdef __KERNEL__
+#  include <asm/byteorder.h>
+#else
+#  include <endian.h>
+#endif
+
+#if defined(__KERNEL__)
+#  if defined(__BIG_ENDIAN)
+#    define _PATCHKEY(id) (0xfd00|id)
+#  elif defined(__LITTLE_ENDIAN)
+#    define _PATCHKEY(id) ((id<<8)|0x00fd)
+#  else
+#    error "could not determine byte order"
+#  endif
+#else
+#if defined(__BYTE_ORDER)
+#  if __BYTE_ORDER == __BIG_ENDIAN
+#    define _PATCHKEY(id) (0xfd00|id)
+#  elif __BYTE_ORDER == __LITTLE_ENDIAN
+#    define _PATCHKEY(id) ((id<<8)|0x00fd)
+#  else
+#    error "could not determine byte order"
+#  endif
+#endif
+#endif
+
+#endif /* _LINUX_PATCHKEY_H */
diff --git a/include/linux/path.h b/include/linux/path.h
new file mode 100644
index 00000000..edc98dec
--- /dev/null
+++ b/include/linux/path.h
@@ -0,0 +1,20 @@
+#ifndef _LINUX_PATH_H
+#define _LINUX_PATH_H
+
+struct dentry;
+struct vfsmount;
+
+struct path {
+	struct vfsmount *mnt;
+	struct dentry *dentry;
+};
+
+extern void path_get(struct path *);
+extern void path_put(struct path *);
+
+static inline int path_equal(const struct path *path1, const struct path *path2)
+{
+	return path1->mnt == path2->mnt && path1->dentry == path2->dentry;
+}
+
+#endif  /* _LINUX_PATH_H */
diff --git a/include/linux/pch_dma.h b/include/linux/pch_dma.h
new file mode 100644
index 00000000..fdafe529
--- /dev/null
+++ b/include/linux/pch_dma.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef PCH_DMA_H
+#define PCH_DMA_H
+
+#include <linux/dmaengine.h>
+
+enum pch_dma_width {
+	PCH_DMA_WIDTH_1_BYTE,
+	PCH_DMA_WIDTH_2_BYTES,
+	PCH_DMA_WIDTH_4_BYTES,
+};
+
+struct pch_dma_slave {
+	struct device		*dma_dev;
+	unsigned int		chan_id;
+	dma_addr_t		tx_reg;
+	dma_addr_t		rx_reg;
+	enum pch_dma_width	width;
+};
+
+#endif
diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
new file mode 100644
index 00000000..44623500
--- /dev/null
+++ b/include/linux/pci-acpi.h
@@ -0,0 +1,46 @@
+/*
+ * File		pci-acpi.h
+ *
+ * Copyright (C) 2004 Intel
+ * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
+ */
+
+#ifndef _PCI_ACPI_H_
+#define _PCI_ACPI_H_
+
+#include <linux/acpi.h>
+
+#ifdef CONFIG_ACPI
+extern acpi_status pci_acpi_add_bus_pm_notifier(struct acpi_device *dev,
+						 struct pci_bus *pci_bus);
+extern acpi_status pci_acpi_remove_bus_pm_notifier(struct acpi_device *dev);
+extern acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev,
+					     struct pci_dev *pci_dev);
+extern acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev);
+
+static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
+{
+	struct pci_bus *pbus = pdev->bus;
+	/* Find a PCI root bus */
+	while (!pci_is_root_bus(pbus))
+		pbus = pbus->parent;
+	return acpi_get_pci_rootbridge_handle(pci_domain_nr(pbus),
+					      pbus->number);
+}
+
+static inline acpi_handle acpi_pci_get_bridge_handle(struct pci_bus *pbus)
+{
+	if (!pci_is_root_bus(pbus))
+		return DEVICE_ACPI_HANDLE(&(pbus->self->dev));
+	return acpi_get_pci_rootbridge_handle(pci_domain_nr(pbus),
+					      pbus->number);
+}
+#endif
+
+#ifdef CONFIG_ACPI_APEI
+extern bool aer_acpi_firmware_first(void);
+#else
+static inline bool aer_acpi_firmware_first(void) { return false; }
+#endif
+
+#endif	/* _PCI_ACPI_H_ */
diff --git a/include/linux/pci-aspm.h b/include/linux/pci-aspm.h
new file mode 100644
index 00000000..c8320144
--- /dev/null
+++ b/include/linux/pci-aspm.h
@@ -0,0 +1,69 @@
+/*
+ *	aspm.h
+ *
+ *	PCI Express ASPM defines and function prototypes
+ *
+ *	Copyright (C) 2007 Intel Corp.
+ *		Zhang Yanmin (yanmin.zhang@intel.com)
+ *		Shaohua Li (shaohua.li@intel.com)
+ *
+ *	For more information, please consult the following manuals (look at
+ *	http://www.pcisig.com/ for how to get them):
+ *
+ *	PCI Express Specification
+ */
+
+#ifndef LINUX_ASPM_H
+#define LINUX_ASPM_H
+
+#include <linux/pci.h>
+
+#define PCIE_LINK_STATE_L0S	1
+#define PCIE_LINK_STATE_L1	2
+#define PCIE_LINK_STATE_CLKPM	4
+
+#ifdef CONFIG_PCIEASPM
+extern void pcie_aspm_init_link_state(struct pci_dev *pdev);
+extern void pcie_aspm_exit_link_state(struct pci_dev *pdev);
+extern void pcie_aspm_pm_state_change(struct pci_dev *pdev);
+extern void pcie_aspm_powersave_config_link(struct pci_dev *pdev);
+extern void pci_disable_link_state(struct pci_dev *pdev, int state);
+extern void pci_disable_link_state_locked(struct pci_dev *pdev, int state);
+extern void pcie_clear_aspm(struct pci_bus *bus);
+extern void pcie_no_aspm(void);
+#else
+static inline void pcie_aspm_init_link_state(struct pci_dev *pdev)
+{
+}
+static inline void pcie_aspm_exit_link_state(struct pci_dev *pdev)
+{
+}
+static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev)
+{
+}
+static inline void pcie_aspm_powersave_config_link(struct pci_dev *pdev)
+{
+}
+static inline void pci_disable_link_state(struct pci_dev *pdev, int state)
+{
+}
+static inline void pcie_clear_aspm(struct pci_bus *bus)
+{
+}
+static inline void pcie_no_aspm(void)
+{
+}
+#endif
+
+#ifdef CONFIG_PCIEASPM_DEBUG /* this depends on CONFIG_PCIEASPM */
+extern void pcie_aspm_create_sysfs_dev_files(struct pci_dev *pdev);
+extern void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev);
+#else
+static inline void pcie_aspm_create_sysfs_dev_files(struct pci_dev *pdev)
+{
+}
+static inline void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev)
+{
+}
+#endif
+#endif /* LINUX_ASPM_H */
diff --git a/include/linux/pci-ats.h b/include/linux/pci-ats.h
new file mode 100644
index 00000000..7ef68724
--- /dev/null
+++ b/include/linux/pci-ats.h
@@ -0,0 +1,127 @@
+#ifndef LINUX_PCI_ATS_H
+#define LINUX_PCI_ATS_H
+
+#include <linux/pci.h>
+
+/* Address Translation Service */
+struct pci_ats {
+	int pos;        /* capability position */
+	int stu;        /* Smallest Translation Unit */
+	int qdep;       /* Invalidate Queue Depth */
+	int ref_cnt;    /* Physical Function reference count */
+	unsigned int is_enabled:1;      /* Enable bit is set */
+};
+
+#ifdef CONFIG_PCI_ATS
+
+extern int pci_enable_ats(struct pci_dev *dev, int ps);
+extern void pci_disable_ats(struct pci_dev *dev);
+extern int pci_ats_queue_depth(struct pci_dev *dev);
+
+/**
+ * pci_ats_enabled - query the ATS status
+ * @dev: the PCI device
+ *
+ * Returns 1 if ATS capability is enabled, or 0 if not.
+ */
+static inline int pci_ats_enabled(struct pci_dev *dev)
+{
+	return dev->ats && dev->ats->is_enabled;
+}
+
+#else /* CONFIG_PCI_ATS */
+
+static inline int pci_enable_ats(struct pci_dev *dev, int ps)
+{
+	return -ENODEV;
+}
+
+static inline void pci_disable_ats(struct pci_dev *dev)
+{
+}
+
+static inline int pci_ats_queue_depth(struct pci_dev *dev)
+{
+	return -ENODEV;
+}
+
+static inline int pci_ats_enabled(struct pci_dev *dev)
+{
+	return 0;
+}
+
+#endif /* CONFIG_PCI_ATS */
+
+#ifdef CONFIG_PCI_PRI
+
+extern int  pci_enable_pri(struct pci_dev *pdev, u32 reqs);
+extern void pci_disable_pri(struct pci_dev *pdev);
+extern bool pci_pri_enabled(struct pci_dev *pdev);
+extern int  pci_reset_pri(struct pci_dev *pdev);
+extern bool pci_pri_stopped(struct pci_dev *pdev);
+extern int  pci_pri_status(struct pci_dev *pdev);
+
+#else /* CONFIG_PCI_PRI */
+
+static inline int pci_enable_pri(struct pci_dev *pdev, u32 reqs)
+{
+	return -ENODEV;
+}
+
+static inline void pci_disable_pri(struct pci_dev *pdev)
+{
+}
+
+static inline bool pci_pri_enabled(struct pci_dev *pdev)
+{
+	return false;
+}
+
+static inline int pci_reset_pri(struct pci_dev *pdev)
+{
+	return -ENODEV;
+}
+
+static inline bool pci_pri_stopped(struct pci_dev *pdev)
+{
+	return true;
+}
+
+static inline int pci_pri_status(struct pci_dev *pdev)
+{
+	return -ENODEV;
+}
+#endif /* CONFIG_PCI_PRI */
+
+#ifdef CONFIG_PCI_PASID
+
+extern int pci_enable_pasid(struct pci_dev *pdev, int features);
+extern void pci_disable_pasid(struct pci_dev *pdev);
+extern int pci_pasid_features(struct pci_dev *pdev);
+extern int pci_max_pasids(struct pci_dev *pdev);
+
+#else  /* CONFIG_PCI_PASID */
+
+static inline int pci_enable_pasid(struct pci_dev *pdev, int features)
+{
+	return -EINVAL;
+}
+
+static inline void pci_disable_pasid(struct pci_dev *pdev)
+{
+}
+
+static inline int pci_pasid_features(struct pci_dev *pdev)
+{
+	return -EINVAL;
+}
+
+static inline int pci_max_pasids(struct pci_dev *pdev)
+{
+	return -EINVAL;
+}
+
+#endif /* CONFIG_PCI_PASID */
+
+
+#endif /* LINUX_PCI_ATS_H*/
diff --git a/include/linux/pci-dma.h b/include/linux/pci-dma.h
new file mode 100644
index 00000000..549a041f
--- /dev/null
+++ b/include/linux/pci-dma.h
@@ -0,0 +1,11 @@
+#ifndef _LINUX_PCI_DMA_H
+#define _LINUX_PCI_DMA_H
+
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) DEFINE_DMA_UNMAP_ADDR(ADDR_NAME);
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)   DEFINE_DMA_UNMAP_LEN(LEN_NAME);
+#define pci_unmap_addr             dma_unmap_addr
+#define pci_unmap_addr_set         dma_unmap_addr_set
+#define pci_unmap_len              dma_unmap_len
+#define pci_unmap_len_set          dma_unmap_len_set
+
+#endif
diff --git a/include/linux/pci.h b/include/linux/pci.h
new file mode 100644
index 00000000..e444f5b4
--- /dev/null
+++ b/include/linux/pci.h
@@ -0,0 +1,1724 @@
+/*
+ *	pci.h
+ *
+ *	PCI defines and function prototypes
+ *	Copyright 1994, Drew Eckhardt
+ *	Copyright 1997--1999 Martin Mares <mj@ucw.cz>
+ *
+ *	For more information, please consult the following manuals (look at
+ *	http://www.pcisig.com/ for how to get them):
+ *
+ *	PCI BIOS Specification
+ *	PCI Local Bus Specification
+ *	PCI to PCI Bridge Specification
+ *	PCI System Design Guide
+ */
+
+#ifndef LINUX_PCI_H
+#define LINUX_PCI_H
+
+#include <linux/pci_regs.h>	/* The pci register defines */
+
+/*
+ * The PCI interface treats multi-function devices as independent
+ * devices.  The slot/function address of each device is encoded
+ * in a single byte as follows:
+ *
+ *	7:3 = slot
+ *	2:0 = function
+ */
+#define PCI_DEVFN(slot, func)	((((slot) & 0x1f) << 3) | ((func) & 0x07))
+#define PCI_SLOT(devfn)		(((devfn) >> 3) & 0x1f)
+#define PCI_FUNC(devfn)		((devfn) & 0x07)
+
+/* Ioctls for /proc/bus/pci/X/Y nodes. */
+#define PCIIOC_BASE		('P' << 24 | 'C' << 16 | 'I' << 8)
+#define PCIIOC_CONTROLLER	(PCIIOC_BASE | 0x00)	/* Get controller for PCI device. */
+#define PCIIOC_MMAP_IS_IO	(PCIIOC_BASE | 0x01)	/* Set mmap state to I/O space. */
+#define PCIIOC_MMAP_IS_MEM	(PCIIOC_BASE | 0x02)	/* Set mmap state to MEM space. */
+#define PCIIOC_WRITE_COMBINE	(PCIIOC_BASE | 0x03)	/* Enable/disable write-combining. */
+
+#ifdef __KERNEL__
+
+#include <linux/mod_devicetable.h>
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/list.h>
+#include <linux/compiler.h>
+#include <linux/errno.h>
+#include <linux/kobject.h>
+#include <linux/atomic.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/irqreturn.h>
+
+/* Include the ID list */
+#include <linux/pci_ids.h>
+
+/* pci_slot represents a physical slot */
+struct pci_slot {
+	struct pci_bus *bus;		/* The bus this slot is on */
+	struct list_head list;		/* node in list of slots on this bus */
+	struct hotplug_slot *hotplug;	/* Hotplug info (migrate over time) */
+	unsigned char number;		/* PCI_SLOT(pci_dev->devfn) */
+	struct kobject kobj;
+};
+
+static inline const char *pci_slot_name(const struct pci_slot *slot)
+{
+	return kobject_name(&slot->kobj);
+}
+
+/* File state for mmap()s on /proc/bus/pci/X/Y */
+enum pci_mmap_state {
+	pci_mmap_io,
+	pci_mmap_mem
+};
+
+/* This defines the direction arg to the DMA mapping routines. */
+#define PCI_DMA_BIDIRECTIONAL	0
+#define PCI_DMA_TODEVICE	1
+#define PCI_DMA_FROMDEVICE	2
+#define PCI_DMA_NONE		3
+
+/*
+ *  For PCI devices, the region numbers are assigned this way:
+ */
+enum {
+	/* #0-5: standard PCI resources */
+	PCI_STD_RESOURCES,
+	PCI_STD_RESOURCE_END = 5,
+
+	/* #6: expansion ROM resource */
+	PCI_ROM_RESOURCE,
+
+	/* device specific resources */
+#ifdef CONFIG_PCI_IOV
+	PCI_IOV_RESOURCES,
+	PCI_IOV_RESOURCE_END = PCI_IOV_RESOURCES + PCI_SRIOV_NUM_BARS - 1,
+#endif
+
+	/* resources assigned to buses behind the bridge */
+#define PCI_BRIDGE_RESOURCE_NUM 4
+
+	PCI_BRIDGE_RESOURCES,
+	PCI_BRIDGE_RESOURCE_END = PCI_BRIDGE_RESOURCES +
+				  PCI_BRIDGE_RESOURCE_NUM - 1,
+
+	/* total resources associated with a PCI device */
+	PCI_NUM_RESOURCES,
+
+	/* preserve this for compatibility */
+	DEVICE_COUNT_RESOURCE = PCI_NUM_RESOURCES,
+};
+
+typedef int __bitwise pci_power_t;
+
+#define PCI_D0		((pci_power_t __force) 0)
+#define PCI_D1		((pci_power_t __force) 1)
+#define PCI_D2		((pci_power_t __force) 2)
+#define PCI_D3hot	((pci_power_t __force) 3)
+#define PCI_D3cold	((pci_power_t __force) 4)
+#define PCI_UNKNOWN	((pci_power_t __force) 5)
+#define PCI_POWER_ERROR	((pci_power_t __force) -1)
+
+/* Remember to update this when the list above changes! */
+extern const char *pci_power_names[];
+
+static inline const char *pci_power_name(pci_power_t state)
+{
+	return pci_power_names[1 + (int) state];
+}
+
+#define PCI_PM_D2_DELAY	200
+#define PCI_PM_D3_WAIT	10
+#define PCI_PM_BUS_WAIT	50
+
+/** The pci_channel state describes connectivity between the CPU and
+ *  the pci device.  If some PCI bus between here and the pci device
+ *  has crashed or locked up, this info is reflected here.
+ */
+typedef unsigned int __bitwise pci_channel_state_t;
+
+enum pci_channel_state {
+	/* I/O channel is in normal state */
+	pci_channel_io_normal = (__force pci_channel_state_t) 1,
+
+	/* I/O to channel is blocked */
+	pci_channel_io_frozen = (__force pci_channel_state_t) 2,
+
+	/* PCI card is dead */
+	pci_channel_io_perm_failure = (__force pci_channel_state_t) 3,
+};
+
+typedef unsigned int __bitwise pcie_reset_state_t;
+
+enum pcie_reset_state {
+	/* Reset is NOT asserted (Use to deassert reset) */
+	pcie_deassert_reset = (__force pcie_reset_state_t) 1,
+
+	/* Use #PERST to reset PCI-E device */
+	pcie_warm_reset = (__force pcie_reset_state_t) 2,
+
+	/* Use PCI-E Hot Reset to reset device */
+	pcie_hot_reset = (__force pcie_reset_state_t) 3
+};
+
+typedef unsigned short __bitwise pci_dev_flags_t;
+enum pci_dev_flags {
+	/* INTX_DISABLE in PCI_COMMAND register disables MSI
+	 * generation too.
+	 */
+	PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG = (__force pci_dev_flags_t) 1,
+	/* Device configuration is irrevocably lost if disabled into D3 */
+	PCI_DEV_FLAGS_NO_D3 = (__force pci_dev_flags_t) 2,
+	/* Provide indication device is assigned by a Virtual Machine Manager */
+	PCI_DEV_FLAGS_ASSIGNED = (__force pci_dev_flags_t) 4,
+};
+
+enum pci_irq_reroute_variant {
+	INTEL_IRQ_REROUTE_VARIANT = 1,
+	MAX_IRQ_REROUTE_VARIANTS = 3
+};
+
+typedef unsigned short __bitwise pci_bus_flags_t;
+enum pci_bus_flags {
+	PCI_BUS_FLAGS_NO_MSI   = (__force pci_bus_flags_t) 1,
+	PCI_BUS_FLAGS_NO_MMRBC = (__force pci_bus_flags_t) 2,
+};
+
+/* Based on the PCI Hotplug Spec, but some values are made up by us */
+enum pci_bus_speed {
+	PCI_SPEED_33MHz			= 0x00,
+	PCI_SPEED_66MHz			= 0x01,
+	PCI_SPEED_66MHz_PCIX		= 0x02,
+	PCI_SPEED_100MHz_PCIX		= 0x03,
+	PCI_SPEED_133MHz_PCIX		= 0x04,
+	PCI_SPEED_66MHz_PCIX_ECC	= 0x05,
+	PCI_SPEED_100MHz_PCIX_ECC	= 0x06,
+	PCI_SPEED_133MHz_PCIX_ECC	= 0x07,
+	PCI_SPEED_66MHz_PCIX_266	= 0x09,
+	PCI_SPEED_100MHz_PCIX_266	= 0x0a,
+	PCI_SPEED_133MHz_PCIX_266	= 0x0b,
+	AGP_UNKNOWN			= 0x0c,
+	AGP_1X				= 0x0d,
+	AGP_2X				= 0x0e,
+	AGP_4X				= 0x0f,
+	AGP_8X				= 0x10,
+	PCI_SPEED_66MHz_PCIX_533	= 0x11,
+	PCI_SPEED_100MHz_PCIX_533	= 0x12,
+	PCI_SPEED_133MHz_PCIX_533	= 0x13,
+	PCIE_SPEED_2_5GT		= 0x14,
+	PCIE_SPEED_5_0GT		= 0x15,
+	PCIE_SPEED_8_0GT		= 0x16,
+	PCI_SPEED_UNKNOWN		= 0xff,
+};
+
+struct pci_cap_saved_data {
+	char cap_nr;
+	unsigned int size;
+	u32 data[0];
+};
+
+struct pci_cap_saved_state {
+	struct hlist_node next;
+	struct pci_cap_saved_data cap;
+};
+
+struct pcie_link_state;
+struct pci_vpd;
+struct pci_sriov;
+struct pci_ats;
+
+/*
+ * The pci_dev structure is used to describe PCI devices.
+ */
+struct pci_dev {
+	struct list_head bus_list;	/* node in per-bus list */
+	struct pci_bus	*bus;		/* bus this device is on */
+	struct pci_bus	*subordinate;	/* bus this device bridges to */
+
+	void		*sysdata;	/* hook for sys-specific extension */
+	struct proc_dir_entry *procent;	/* device entry in /proc/bus/pci */
+	struct pci_slot	*slot;		/* Physical slot this device is in */
+
+	unsigned int	devfn;		/* encoded device & function index */
+	unsigned short	vendor;
+	unsigned short	device;
+	unsigned short	subsystem_vendor;
+	unsigned short	subsystem_device;
+	unsigned int	class;		/* 3 bytes: (base,sub,prog-if) */
+	u8		revision;	/* PCI revision, low byte of class word */
+	u8		hdr_type;	/* PCI header type (`multi' flag masked out) */
+	u8		pcie_cap;	/* PCI-E capability offset */
+	u8		pcie_type:4;	/* PCI-E device/port type */
+	u8		pcie_mpss:3;	/* PCI-E Max Payload Size Supported */
+	u8		rom_base_reg;	/* which config register controls the ROM */
+	u8		pin;  		/* which interrupt pin this device uses */
+
+	struct pci_driver *driver;	/* which driver has allocated this device */
+	u64		dma_mask;	/* Mask of the bits of bus address this
+					   device implements.  Normally this is
+					   0xffffffff.  You only need to change
+					   this if your device has broken DMA
+					   or supports 64-bit transfers.  */
+
+	struct device_dma_parameters dma_parms;
+
+	pci_power_t     current_state;  /* Current operating state. In ACPI-speak,
+					   this is D0-D3, D0 being fully functional,
+					   and D3 being off. */
+	int		pm_cap;		/* PM capability offset in the
+					   configuration space */
+	unsigned int	pme_support:5;	/* Bitmask of states from which PME#
+					   can be generated */
+	unsigned int	pme_interrupt:1;
+	unsigned int	pme_poll:1;	/* Poll device's PME status bit */
+	unsigned int	d1_support:1;	/* Low power state D1 is supported */
+	unsigned int	d2_support:1;	/* Low power state D2 is supported */
+	unsigned int	no_d1d2:1;	/* Only allow D0 and D3 */
+	unsigned int	mmio_always_on:1;	/* disallow turning off io/mem
+						   decoding during bar sizing */
+	unsigned int	wakeup_prepared:1;
+	unsigned int	d3_delay;	/* D3->D0 transition time in ms */
+
+#ifdef CONFIG_PCIEASPM
+	struct pcie_link_state	*link_state;	/* ASPM link state. */
+#endif
+
+	pci_channel_state_t error_state;	/* current connectivity state */
+	struct	device	dev;		/* Generic device interface */
+
+	int		cfg_size;	/* Size of configuration space */
+
+	/*
+	 * Instead of touching interrupt line and base address registers
+	 * directly, use the values stored here. They might be different!
+	 */
+	unsigned int	irq;
+	struct resource resource[DEVICE_COUNT_RESOURCE]; /* I/O and memory regions + expansion ROMs */
+
+	/* These fields are used by common fixups */
+	unsigned int	transparent:1;	/* Transparent PCI bridge */
+	unsigned int	multifunction:1;/* Part of multi-function device */
+	/* keep track of device state */
+	unsigned int	is_added:1;
+	unsigned int	is_busmaster:1; /* device is busmaster */
+	unsigned int	no_msi:1;	/* device may not use msi */
+	unsigned int	block_cfg_access:1;	/* config space access is blocked */
+	unsigned int	broken_parity_status:1;	/* Device generates false positive parity */
+	unsigned int	irq_reroute_variant:2;	/* device needs IRQ rerouting variant */
+	unsigned int 	msi_enabled:1;
+	unsigned int	msix_enabled:1;
+	unsigned int	ari_enabled:1;	/* ARI forwarding */
+	unsigned int	is_managed:1;
+	unsigned int	is_pcie:1;	/* Obsolete. Will be removed.
+					   Use pci_is_pcie() instead */
+	unsigned int    needs_freset:1; /* Dev requires fundamental reset */
+	unsigned int	state_saved:1;
+	unsigned int	is_physfn:1;
+	unsigned int	is_virtfn:1;
+	unsigned int	reset_fn:1;
+	unsigned int    is_hotplug_bridge:1;
+	unsigned int    __aer_firmware_first_valid:1;
+	unsigned int	__aer_firmware_first:1;
+	pci_dev_flags_t dev_flags;
+	atomic_t	enable_cnt;	/* pci_enable_device has been called */
+
+	u32		saved_config_space[16]; /* config space saved at suspend time */
+	struct hlist_head saved_cap_space;
+	struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */
+	int rom_attr_enabled;		/* has display of the rom attribute been enabled? */
+	struct bin_attribute *res_attr[DEVICE_COUNT_RESOURCE]; /* sysfs file for resources */
+	struct bin_attribute *res_attr_wc[DEVICE_COUNT_RESOURCE]; /* sysfs file for WC mapping of resources */
+#ifdef CONFIG_PCI_MSI
+	struct list_head msi_list;
+	struct kset *msi_kset;
+#endif
+	struct pci_vpd *vpd;
+#ifdef CONFIG_PCI_ATS
+	union {
+		struct pci_sriov *sriov;	/* SR-IOV capability related */
+		struct pci_dev *physfn;	/* the PF this VF is associated with */
+	};
+	struct pci_ats	*ats;	/* Address Translation Service */
+#endif
+};
+
+static inline struct pci_dev *pci_physfn(struct pci_dev *dev)
+{
+#ifdef CONFIG_PCI_IOV
+	if (dev->is_virtfn)
+		dev = dev->physfn;
+#endif
+
+	return dev;
+}
+
+extern struct pci_dev *alloc_pci_dev(void);
+
+#define pci_dev_b(n) list_entry(n, struct pci_dev, bus_list)
+#define	to_pci_dev(n) container_of(n, struct pci_dev, dev)
+#define for_each_pci_dev(d) while ((d = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, d)) != NULL)
+
+static inline int pci_channel_offline(struct pci_dev *pdev)
+{
+	return (pdev->error_state != pci_channel_io_normal);
+}
+
+struct pci_host_bridge_window {
+	struct list_head list;
+	struct resource *res;		/* host bridge aperture (CPU address) */
+	resource_size_t offset;		/* bus address + offset = CPU address */
+};
+
+struct pci_host_bridge {
+	struct list_head list;
+	struct pci_bus *bus;		/* root bus */
+	struct list_head windows;	/* pci_host_bridge_windows */
+};
+
+/*
+ * The first PCI_BRIDGE_RESOURCE_NUM PCI bus resources (those that correspond
+ * to P2P or CardBus bridge windows) go in a table.  Additional ones (for
+ * buses below host bridges or subtractive decode bridges) go in the list.
+ * Use pci_bus_for_each_resource() to iterate through all the resources.
+ */
+
+/*
+ * PCI_SUBTRACTIVE_DECODE means the bridge forwards the window implicitly
+ * and there's no way to program the bridge with the details of the window.
+ * This does not apply to ACPI _CRS windows, even with the _DEC subtractive-
+ * decode bit set, because they are explicit and can be programmed with _SRS.
+ */
+#define PCI_SUBTRACTIVE_DECODE	0x1
+
+struct pci_bus_resource {
+	struct list_head list;
+	struct resource *res;
+	unsigned int flags;
+};
+
+#define PCI_REGION_FLAG_MASK	0x0fU	/* These bits of resource flags tell us the PCI region flags */
+
+struct pci_bus {
+	struct list_head node;		/* node in list of buses */
+	struct pci_bus	*parent;	/* parent bus this bridge is on */
+	struct list_head children;	/* list of child buses */
+	struct list_head devices;	/* list of devices on this bus */
+	struct pci_dev	*self;		/* bridge device as seen by parent */
+	struct list_head slots;		/* list of slots on this bus */
+	struct resource *resource[PCI_BRIDGE_RESOURCE_NUM];
+	struct list_head resources;	/* address space routed to this bus */
+
+	struct pci_ops	*ops;		/* configuration access functions */
+	void		*sysdata;	/* hook for sys-specific extension */
+	struct proc_dir_entry *procdir;	/* directory entry in /proc/bus/pci */
+
+	unsigned char	number;		/* bus number */
+	unsigned char	primary;	/* number of primary bridge */
+	unsigned char	secondary;	/* number of secondary bridge */
+	unsigned char	subordinate;	/* max number of subordinate buses */
+	unsigned char	max_bus_speed;	/* enum pci_bus_speed */
+	unsigned char	cur_bus_speed;	/* enum pci_bus_speed */
+
+	char		name[48];
+
+	unsigned short  bridge_ctl;	/* manage NO_ISA/FBB/et al behaviors */
+	pci_bus_flags_t bus_flags;	/* Inherited by child busses */
+	struct device		*bridge;
+	struct device		dev;
+	struct bin_attribute	*legacy_io; /* legacy I/O for this bus */
+	struct bin_attribute	*legacy_mem; /* legacy mem */
+	unsigned int		is_added:1;
+};
+
+#define pci_bus_b(n)	list_entry(n, struct pci_bus, node)
+#define to_pci_bus(n)	container_of(n, struct pci_bus, dev)
+
+/*
+ * Returns true if the pci bus is root (behind host-pci bridge),
+ * false otherwise
+ */
+static inline bool pci_is_root_bus(struct pci_bus *pbus)
+{
+	return !(pbus->parent);
+}
+
+#ifdef CONFIG_PCI_MSI
+static inline bool pci_dev_msi_enabled(struct pci_dev *pci_dev)
+{
+	return pci_dev->msi_enabled || pci_dev->msix_enabled;
+}
+#else
+static inline bool pci_dev_msi_enabled(struct pci_dev *pci_dev) { return false; }
+#endif
+
+/*
+ * Error values that may be returned by PCI functions.
+ */
+#define PCIBIOS_SUCCESSFUL		0x00
+#define PCIBIOS_FUNC_NOT_SUPPORTED	0x81
+#define PCIBIOS_BAD_VENDOR_ID		0x83
+#define PCIBIOS_DEVICE_NOT_FOUND	0x86
+#define PCIBIOS_BAD_REGISTER_NUMBER	0x87
+#define PCIBIOS_SET_FAILED		0x88
+#define PCIBIOS_BUFFER_TOO_SMALL	0x89
+
+/* Low-level architecture-dependent routines */
+
+struct pci_ops {
+	int (*read)(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val);
+	int (*write)(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val);
+};
+
+/*
+ * ACPI needs to be able to access PCI config space before we've done a
+ * PCI bus scan and created pci_bus structures.
+ */
+extern int raw_pci_read(unsigned int domain, unsigned int bus,
+			unsigned int devfn, int reg, int len, u32 *val);
+extern int raw_pci_write(unsigned int domain, unsigned int bus,
+			unsigned int devfn, int reg, int len, u32 val);
+
+struct pci_bus_region {
+	resource_size_t start;
+	resource_size_t end;
+};
+
+struct pci_dynids {
+	spinlock_t lock;            /* protects list, index */
+	struct list_head list;      /* for IDs added at runtime */
+};
+
+/* ---------------------------------------------------------------- */
+/** PCI Error Recovery System (PCI-ERS).  If a PCI device driver provides
+ *  a set of callbacks in struct pci_error_handlers, then that device driver
+ *  will be notified of PCI bus errors, and will be driven to recovery
+ *  when an error occurs.
+ */
+
+typedef unsigned int __bitwise pci_ers_result_t;
+
+enum pci_ers_result {
+	/* no result/none/not supported in device driver */
+	PCI_ERS_RESULT_NONE = (__force pci_ers_result_t) 1,
+
+	/* Device driver can recover without slot reset */
+	PCI_ERS_RESULT_CAN_RECOVER = (__force pci_ers_result_t) 2,
+
+	/* Device driver wants slot to be reset. */
+	PCI_ERS_RESULT_NEED_RESET = (__force pci_ers_result_t) 3,
+
+	/* Device has completely failed, is unrecoverable */
+	PCI_ERS_RESULT_DISCONNECT = (__force pci_ers_result_t) 4,
+
+	/* Device driver is fully recovered and operational */
+	PCI_ERS_RESULT_RECOVERED = (__force pci_ers_result_t) 5,
+};
+
+/* PCI bus error event callbacks */
+struct pci_error_handlers {
+	/* PCI bus error detected on this device */
+	pci_ers_result_t (*error_detected)(struct pci_dev *dev,
+					   enum pci_channel_state error);
+
+	/* MMIO has been re-enabled, but not DMA */
+	pci_ers_result_t (*mmio_enabled)(struct pci_dev *dev);
+
+	/* PCI Express link has been reset */
+	pci_ers_result_t (*link_reset)(struct pci_dev *dev);
+
+	/* PCI slot has been reset */
+	pci_ers_result_t (*slot_reset)(struct pci_dev *dev);
+
+	/* Device driver may resume normal operations */
+	void (*resume)(struct pci_dev *dev);
+};
+
+/* ---------------------------------------------------------------- */
+
+struct module;
+struct pci_driver {
+	struct list_head node;
+	const char *name;
+	const struct pci_device_id *id_table;	/* must be non-NULL for probe to be called */
+	int  (*probe)  (struct pci_dev *dev, const struct pci_device_id *id);	/* New device inserted */
+	void (*remove) (struct pci_dev *dev);	/* Device removed (NULL if not a hot-plug capable driver) */
+	int  (*suspend) (struct pci_dev *dev, pm_message_t state);	/* Device suspended */
+	int  (*suspend_late) (struct pci_dev *dev, pm_message_t state);
+	int  (*resume_early) (struct pci_dev *dev);
+	int  (*resume) (struct pci_dev *dev);	                /* Device woken up */
+	void (*shutdown) (struct pci_dev *dev);
+	struct pci_error_handlers *err_handler;
+	struct device_driver	driver;
+	struct pci_dynids dynids;
+};
+
+#define	to_pci_driver(drv) container_of(drv, struct pci_driver, driver)
+
+/**
+ * DEFINE_PCI_DEVICE_TABLE - macro used to describe a pci device table
+ * @_table: device table name
+ *
+ * This macro is used to create a struct pci_device_id array (a device table)
+ * in a generic manner.
+ */
+#define DEFINE_PCI_DEVICE_TABLE(_table) \
+	const struct pci_device_id _table[] __devinitconst
+
+/**
+ * PCI_DEVICE - macro used to describe a specific pci device
+ * @vend: the 16 bit PCI Vendor ID
+ * @dev: the 16 bit PCI Device ID
+ *
+ * This macro is used to create a struct pci_device_id that matches a
+ * specific device.  The subvendor and subdevice fields will be set to
+ * PCI_ANY_ID.
+ */
+#define PCI_DEVICE(vend,dev) \
+	.vendor = (vend), .device = (dev), \
+	.subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID
+
+/**
+ * PCI_DEVICE_CLASS - macro used to describe a specific pci device class
+ * @dev_class: the class, subclass, prog-if triple for this device
+ * @dev_class_mask: the class mask for this device
+ *
+ * This macro is used to create a struct pci_device_id that matches a
+ * specific PCI class.  The vendor, device, subvendor, and subdevice
+ * fields will be set to PCI_ANY_ID.
+ */
+#define PCI_DEVICE_CLASS(dev_class,dev_class_mask) \
+	.class = (dev_class), .class_mask = (dev_class_mask), \
+	.vendor = PCI_ANY_ID, .device = PCI_ANY_ID, \
+	.subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID
+
+/**
+ * PCI_VDEVICE - macro used to describe a specific pci device in short form
+ * @vendor: the vendor name
+ * @device: the 16 bit PCI Device ID
+ *
+ * This macro is used to create a struct pci_device_id that matches a
+ * specific PCI device.  The subvendor, and subdevice fields will be set
+ * to PCI_ANY_ID. The macro allows the next field to follow as the device
+ * private data.
+ */
+
+#define PCI_VDEVICE(vendor, device)		\
+	PCI_VENDOR_ID_##vendor, (device),	\
+	PCI_ANY_ID, PCI_ANY_ID, 0, 0
+
+/* these external functions are only available when PCI support is enabled */
+#ifdef CONFIG_PCI
+
+extern void pcie_bus_configure_settings(struct pci_bus *bus, u8 smpss);
+
+enum pcie_bus_config_types {
+	PCIE_BUS_TUNE_OFF,
+	PCIE_BUS_SAFE,
+	PCIE_BUS_PERFORMANCE,
+	PCIE_BUS_PEER2PEER,
+};
+
+extern enum pcie_bus_config_types pcie_bus_config;
+
+extern struct bus_type pci_bus_type;
+
+/* Do NOT directly access these two variables, unless you are arch specific pci
+ * code, or pci core code. */
+extern struct list_head pci_root_buses;	/* list of all known PCI buses */
+/* Some device drivers need know if pci is initiated */
+extern int no_pci_devices(void);
+
+void pcibios_fixup_bus(struct pci_bus *);
+int __must_check pcibios_enable_device(struct pci_dev *, int mask);
+char *pcibios_setup(char *str);
+
+/* Used only when drivers/pci/setup.c is used */
+resource_size_t pcibios_align_resource(void *, const struct resource *,
+				resource_size_t,
+				resource_size_t);
+void pcibios_update_irq(struct pci_dev *, int irq);
+
+/* Weak but can be overriden by arch */
+void pci_fixup_cardbus(struct pci_bus *);
+
+/* Generic PCI functions used internally */
+
+void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+			     struct resource *res);
+void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+			     struct pci_bus_region *region);
+void pcibios_scan_specific_bus(int busn);
+extern struct pci_bus *pci_find_bus(int domain, int busnr);
+void pci_bus_add_devices(const struct pci_bus *bus);
+struct pci_bus *pci_scan_bus_parented(struct device *parent, int bus,
+				      struct pci_ops *ops, void *sysdata);
+struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops, void *sysdata);
+struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
+				    struct pci_ops *ops, void *sysdata,
+				    struct list_head *resources);
+struct pci_bus * __devinit pci_scan_root_bus(struct device *parent, int bus,
+					     struct pci_ops *ops, void *sysdata,
+					     struct list_head *resources);
+struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev,
+				int busnr);
+void pcie_update_link_speed(struct pci_bus *bus, u16 link_status);
+struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr,
+				 const char *name,
+				 struct hotplug_slot *hotplug);
+void pci_destroy_slot(struct pci_slot *slot);
+void pci_renumber_slot(struct pci_slot *slot, int slot_nr);
+int pci_scan_slot(struct pci_bus *bus, int devfn);
+struct pci_dev *pci_scan_single_device(struct pci_bus *bus, int devfn);
+void pci_device_add(struct pci_dev *dev, struct pci_bus *bus);
+unsigned int pci_scan_child_bus(struct pci_bus *bus);
+int __must_check pci_bus_add_device(struct pci_dev *dev);
+void pci_read_bridge_bases(struct pci_bus *child);
+struct resource *pci_find_parent_resource(const struct pci_dev *dev,
+					  struct resource *res);
+u8 pci_swizzle_interrupt_pin(struct pci_dev *dev, u8 pin);
+int pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge);
+u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp);
+extern struct pci_dev *pci_dev_get(struct pci_dev *dev);
+extern void pci_dev_put(struct pci_dev *dev);
+extern void pci_remove_bus(struct pci_bus *b);
+extern void __pci_remove_bus_device(struct pci_dev *dev);
+extern void pci_stop_and_remove_bus_device(struct pci_dev *dev);
+extern void pci_stop_bus_device(struct pci_dev *dev);
+void pci_setup_cardbus(struct pci_bus *bus);
+extern void pci_sort_breadthfirst(void);
+#define dev_is_pci(d) ((d)->bus == &pci_bus_type)
+#define dev_is_pf(d) ((dev_is_pci(d) ? to_pci_dev(d)->is_physfn : false))
+#define dev_num_vf(d) ((dev_is_pci(d) ? pci_num_vf(to_pci_dev(d)) : 0))
+
+/* Generic PCI functions exported to card drivers */
+
+enum pci_lost_interrupt_reason {
+	PCI_LOST_IRQ_NO_INFORMATION = 0,
+	PCI_LOST_IRQ_DISABLE_MSI,
+	PCI_LOST_IRQ_DISABLE_MSIX,
+	PCI_LOST_IRQ_DISABLE_ACPI,
+};
+enum pci_lost_interrupt_reason pci_lost_interrupt(struct pci_dev *dev);
+int pci_find_capability(struct pci_dev *dev, int cap);
+int pci_find_next_capability(struct pci_dev *dev, u8 pos, int cap);
+int pci_find_ext_capability(struct pci_dev *dev, int cap);
+int pci_bus_find_ext_capability(struct pci_bus *bus, unsigned int devfn,
+				int cap);
+int pci_find_ht_capability(struct pci_dev *dev, int ht_cap);
+int pci_find_next_ht_capability(struct pci_dev *dev, int pos, int ht_cap);
+struct pci_bus *pci_find_next_bus(const struct pci_bus *from);
+
+struct pci_dev *pci_get_device(unsigned int vendor, unsigned int device,
+				struct pci_dev *from);
+struct pci_dev *pci_get_subsys(unsigned int vendor, unsigned int device,
+				unsigned int ss_vendor, unsigned int ss_device,
+				struct pci_dev *from);
+struct pci_dev *pci_get_slot(struct pci_bus *bus, unsigned int devfn);
+struct pci_dev *pci_get_domain_bus_and_slot(int domain, unsigned int bus,
+					    unsigned int devfn);
+static inline struct pci_dev *pci_get_bus_and_slot(unsigned int bus,
+						   unsigned int devfn)
+{
+	return pci_get_domain_bus_and_slot(0, bus, devfn);
+}
+struct pci_dev *pci_get_class(unsigned int class, struct pci_dev *from);
+int pci_dev_present(const struct pci_device_id *ids);
+
+int pci_bus_read_config_byte(struct pci_bus *bus, unsigned int devfn,
+			     int where, u8 *val);
+int pci_bus_read_config_word(struct pci_bus *bus, unsigned int devfn,
+			     int where, u16 *val);
+int pci_bus_read_config_dword(struct pci_bus *bus, unsigned int devfn,
+			      int where, u32 *val);
+int pci_bus_write_config_byte(struct pci_bus *bus, unsigned int devfn,
+			      int where, u8 val);
+int pci_bus_write_config_word(struct pci_bus *bus, unsigned int devfn,
+			      int where, u16 val);
+int pci_bus_write_config_dword(struct pci_bus *bus, unsigned int devfn,
+			       int where, u32 val);
+struct pci_ops *pci_bus_set_ops(struct pci_bus *bus, struct pci_ops *ops);
+
+static inline int pci_read_config_byte(const struct pci_dev *dev, int where, u8 *val)
+{
+	return pci_bus_read_config_byte(dev->bus, dev->devfn, where, val);
+}
+static inline int pci_read_config_word(const struct pci_dev *dev, int where, u16 *val)
+{
+	return pci_bus_read_config_word(dev->bus, dev->devfn, where, val);
+}
+static inline int pci_read_config_dword(const struct pci_dev *dev, int where,
+					u32 *val)
+{
+	return pci_bus_read_config_dword(dev->bus, dev->devfn, where, val);
+}
+static inline int pci_write_config_byte(const struct pci_dev *dev, int where, u8 val)
+{
+	return pci_bus_write_config_byte(dev->bus, dev->devfn, where, val);
+}
+static inline int pci_write_config_word(const struct pci_dev *dev, int where, u16 val)
+{
+	return pci_bus_write_config_word(dev->bus, dev->devfn, where, val);
+}
+static inline int pci_write_config_dword(const struct pci_dev *dev, int where,
+					 u32 val)
+{
+	return pci_bus_write_config_dword(dev->bus, dev->devfn, where, val);
+}
+
+int __must_check pci_enable_device(struct pci_dev *dev);
+int __must_check pci_enable_device_io(struct pci_dev *dev);
+int __must_check pci_enable_device_mem(struct pci_dev *dev);
+int __must_check pci_reenable_device(struct pci_dev *);
+int __must_check pcim_enable_device(struct pci_dev *pdev);
+void pcim_pin_device(struct pci_dev *pdev);
+
+static inline int pci_is_enabled(struct pci_dev *pdev)
+{
+	return (atomic_read(&pdev->enable_cnt) > 0);
+}
+
+static inline int pci_is_managed(struct pci_dev *pdev)
+{
+	return pdev->is_managed;
+}
+
+void pci_disable_device(struct pci_dev *dev);
+
+extern unsigned int pcibios_max_latency;
+void pci_set_master(struct pci_dev *dev);
+void pci_clear_master(struct pci_dev *dev);
+
+int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state);
+int pci_set_cacheline_size(struct pci_dev *dev);
+#define HAVE_PCI_SET_MWI
+int __must_check pci_set_mwi(struct pci_dev *dev);
+int pci_try_set_mwi(struct pci_dev *dev);
+void pci_clear_mwi(struct pci_dev *dev);
+void pci_intx(struct pci_dev *dev, int enable);
+bool pci_intx_mask_supported(struct pci_dev *dev);
+bool pci_check_and_mask_intx(struct pci_dev *dev);
+bool pci_check_and_unmask_intx(struct pci_dev *dev);
+void pci_msi_off(struct pci_dev *dev);
+int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size);
+int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask);
+int pcix_get_max_mmrbc(struct pci_dev *dev);
+int pcix_get_mmrbc(struct pci_dev *dev);
+int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc);
+int pcie_get_readrq(struct pci_dev *dev);
+int pcie_set_readrq(struct pci_dev *dev, int rq);
+int pcie_get_mps(struct pci_dev *dev);
+int pcie_set_mps(struct pci_dev *dev, int mps);
+int __pci_reset_function(struct pci_dev *dev);
+int __pci_reset_function_locked(struct pci_dev *dev);
+int pci_reset_function(struct pci_dev *dev);
+void pci_update_resource(struct pci_dev *dev, int resno);
+int __must_check pci_assign_resource(struct pci_dev *dev, int i);
+int __must_check pci_reassign_resource(struct pci_dev *dev, int i, resource_size_t add_size, resource_size_t align);
+int pci_select_bars(struct pci_dev *dev, unsigned long flags);
+
+/* ROM control related routines */
+int pci_enable_rom(struct pci_dev *pdev);
+void pci_disable_rom(struct pci_dev *pdev);
+void __iomem __must_check *pci_map_rom(struct pci_dev *pdev, size_t *size);
+void pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom);
+size_t pci_get_rom_size(struct pci_dev *pdev, void __iomem *rom, size_t size);
+
+/* Power management related routines */
+int pci_save_state(struct pci_dev *dev);
+void pci_restore_state(struct pci_dev *dev);
+struct pci_saved_state *pci_store_saved_state(struct pci_dev *dev);
+int pci_load_saved_state(struct pci_dev *dev, struct pci_saved_state *state);
+int pci_load_and_free_saved_state(struct pci_dev *dev,
+				  struct pci_saved_state **state);
+int __pci_complete_power_transition(struct pci_dev *dev, pci_power_t state);
+int pci_set_power_state(struct pci_dev *dev, pci_power_t state);
+pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state);
+bool pci_pme_capable(struct pci_dev *dev, pci_power_t state);
+void pci_pme_active(struct pci_dev *dev, bool enable);
+int __pci_enable_wake(struct pci_dev *dev, pci_power_t state,
+		      bool runtime, bool enable);
+int pci_wake_from_d3(struct pci_dev *dev, bool enable);
+pci_power_t pci_target_state(struct pci_dev *dev);
+int pci_prepare_to_sleep(struct pci_dev *dev);
+int pci_back_from_sleep(struct pci_dev *dev);
+bool pci_dev_run_wake(struct pci_dev *dev);
+bool pci_check_pme_status(struct pci_dev *dev);
+void pci_pme_wakeup_bus(struct pci_bus *bus);
+
+static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state,
+				  bool enable)
+{
+	return __pci_enable_wake(dev, state, false, enable);
+}
+
+#define PCI_EXP_IDO_REQUEST	(1<<0)
+#define PCI_EXP_IDO_COMPLETION	(1<<1)
+void pci_enable_ido(struct pci_dev *dev, unsigned long type);
+void pci_disable_ido(struct pci_dev *dev, unsigned long type);
+
+enum pci_obff_signal_type {
+	PCI_EXP_OBFF_SIGNAL_L0 = 0,
+	PCI_EXP_OBFF_SIGNAL_ALWAYS = 1,
+};
+int pci_enable_obff(struct pci_dev *dev, enum pci_obff_signal_type);
+void pci_disable_obff(struct pci_dev *dev);
+
+bool pci_ltr_supported(struct pci_dev *dev);
+int pci_enable_ltr(struct pci_dev *dev);
+void pci_disable_ltr(struct pci_dev *dev);
+int pci_set_ltr(struct pci_dev *dev, int snoop_lat_ns, int nosnoop_lat_ns);
+
+/* For use by arch with custom probe code */
+void set_pcie_port_type(struct pci_dev *pdev);
+void set_pcie_hotplug_bridge(struct pci_dev *pdev);
+
+/* Functions for PCI Hotplug drivers to use */
+int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap);
+#ifdef CONFIG_HOTPLUG
+unsigned int pci_rescan_bus_bridge_resize(struct pci_dev *bridge);
+unsigned int pci_rescan_bus(struct pci_bus *bus);
+#endif
+
+/* Vital product data routines */
+ssize_t pci_read_vpd(struct pci_dev *dev, loff_t pos, size_t count, void *buf);
+ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void *buf);
+int pci_vpd_truncate(struct pci_dev *dev, size_t size);
+
+/* Helper functions for low-level code (drivers/pci/setup-[bus,res].c) */
+resource_size_t pcibios_retrieve_fw_addr(struct pci_dev *dev, int idx);
+void pci_bus_assign_resources(const struct pci_bus *bus);
+void pci_bus_size_bridges(struct pci_bus *bus);
+int pci_claim_resource(struct pci_dev *, int);
+void pci_assign_unassigned_resources(void);
+void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge);
+void pdev_enable_device(struct pci_dev *);
+int pci_enable_resources(struct pci_dev *, int mask);
+void pci_fixup_irqs(u8 (*)(struct pci_dev *, u8 *),
+		    int (*)(const struct pci_dev *, u8, u8));
+#define HAVE_PCI_REQ_REGIONS	2
+int __must_check pci_request_regions(struct pci_dev *, const char *);
+int __must_check pci_request_regions_exclusive(struct pci_dev *, const char *);
+void pci_release_regions(struct pci_dev *);
+int __must_check pci_request_region(struct pci_dev *, int, const char *);
+int __must_check pci_request_region_exclusive(struct pci_dev *, int, const char *);
+void pci_release_region(struct pci_dev *, int);
+int pci_request_selected_regions(struct pci_dev *, int, const char *);
+int pci_request_selected_regions_exclusive(struct pci_dev *, int, const char *);
+void pci_release_selected_regions(struct pci_dev *, int);
+
+/* drivers/pci/bus.c */
+void pci_add_resource(struct list_head *resources, struct resource *res);
+void pci_add_resource_offset(struct list_head *resources, struct resource *res,
+			     resource_size_t offset);
+void pci_free_resource_list(struct list_head *resources);
+void pci_bus_add_resource(struct pci_bus *bus, struct resource *res, unsigned int flags);
+struct resource *pci_bus_resource_n(const struct pci_bus *bus, int n);
+void pci_bus_remove_resources(struct pci_bus *bus);
+
+#define pci_bus_for_each_resource(bus, res, i)				\
+	for (i = 0;							\
+	    (res = pci_bus_resource_n(bus, i)) || i < PCI_BRIDGE_RESOURCE_NUM; \
+	     i++)
+
+int __must_check pci_bus_alloc_resource(struct pci_bus *bus,
+			struct resource *res, resource_size_t size,
+			resource_size_t align, resource_size_t min,
+			unsigned int type_mask,
+			resource_size_t (*alignf)(void *,
+						  const struct resource *,
+						  resource_size_t,
+						  resource_size_t),
+			void *alignf_data);
+void pci_enable_bridges(struct pci_bus *bus);
+
+/* Proper probing supporting hot-pluggable devices */
+int __must_check __pci_register_driver(struct pci_driver *, struct module *,
+				       const char *mod_name);
+
+/*
+ * pci_register_driver must be a macro so that KBUILD_MODNAME can be expanded
+ */
+#define pci_register_driver(driver)		\
+	__pci_register_driver(driver, THIS_MODULE, KBUILD_MODNAME)
+
+void pci_unregister_driver(struct pci_driver *dev);
+
+/**
+ * module_pci_driver() - Helper macro for registering a PCI driver
+ * @__pci_driver: pci_driver struct
+ *
+ * Helper macro for PCI drivers which do not do anything special in module
+ * init/exit. This eliminates a lot of boilerplate. Each module may only
+ * use this macro once, and calling it replaces module_init() and module_exit()
+ */
+#define module_pci_driver(__pci_driver) \
+	module_driver(__pci_driver, pci_register_driver, \
+		       pci_unregister_driver)
+
+void pci_stop_and_remove_behind_bridge(struct pci_dev *dev);
+struct pci_driver *pci_dev_driver(const struct pci_dev *dev);
+int pci_add_dynid(struct pci_driver *drv,
+		  unsigned int vendor, unsigned int device,
+		  unsigned int subvendor, unsigned int subdevice,
+		  unsigned int class, unsigned int class_mask,
+		  unsigned long driver_data);
+const struct pci_device_id *pci_match_id(const struct pci_device_id *ids,
+					 struct pci_dev *dev);
+int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max,
+		    int pass);
+
+void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
+		  void *userdata);
+int pci_cfg_space_size_ext(struct pci_dev *dev);
+int pci_cfg_space_size(struct pci_dev *dev);
+unsigned char pci_bus_max_busnr(struct pci_bus *bus);
+void pci_setup_bridge(struct pci_bus *bus);
+
+#define PCI_VGA_STATE_CHANGE_BRIDGE (1 << 0)
+#define PCI_VGA_STATE_CHANGE_DECODES (1 << 1)
+
+int pci_set_vga_state(struct pci_dev *pdev, bool decode,
+		      unsigned int command_bits, u32 flags);
+/* kmem_cache style wrapper around pci_alloc_consistent() */
+
+#include <linux/pci-dma.h>
+#include <linux/dmapool.h>
+
+#define	pci_pool dma_pool
+#define pci_pool_create(name, pdev, size, align, allocation) \
+		dma_pool_create(name, &pdev->dev, size, align, allocation)
+#define	pci_pool_destroy(pool) dma_pool_destroy(pool)
+#define	pci_pool_alloc(pool, flags, handle) dma_pool_alloc(pool, flags, handle)
+#define	pci_pool_free(pool, vaddr, addr) dma_pool_free(pool, vaddr, addr)
+
+enum pci_dma_burst_strategy {
+	PCI_DMA_BURST_INFINITY,	/* make bursts as large as possible,
+				   strategy_parameter is N/A */
+	PCI_DMA_BURST_BOUNDARY, /* disconnect at every strategy_parameter
+				   byte boundaries */
+	PCI_DMA_BURST_MULTIPLE, /* disconnect at some multiple of
+				   strategy_parameter byte boundaries */
+};
+
+struct msix_entry {
+	u32	vector;	/* kernel uses to write allocated vector */
+	u16	entry;	/* driver uses to specify entry, OS writes */
+};
+
+
+#ifndef CONFIG_PCI_MSI
+static inline int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec)
+{
+	return -1;
+}
+
+static inline void pci_msi_shutdown(struct pci_dev *dev)
+{ }
+static inline void pci_disable_msi(struct pci_dev *dev)
+{ }
+
+static inline int pci_msix_table_size(struct pci_dev *dev)
+{
+	return 0;
+}
+static inline int pci_enable_msix(struct pci_dev *dev,
+				  struct msix_entry *entries, int nvec)
+{
+	return -1;
+}
+
+static inline void pci_msix_shutdown(struct pci_dev *dev)
+{ }
+static inline void pci_disable_msix(struct pci_dev *dev)
+{ }
+
+static inline void msi_remove_pci_irq_vectors(struct pci_dev *dev)
+{ }
+
+static inline void pci_restore_msi_state(struct pci_dev *dev)
+{ }
+static inline int pci_msi_enabled(void)
+{
+	return 0;
+}
+#else
+extern int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec);
+extern void pci_msi_shutdown(struct pci_dev *dev);
+extern void pci_disable_msi(struct pci_dev *dev);
+extern int pci_msix_table_size(struct pci_dev *dev);
+extern int pci_enable_msix(struct pci_dev *dev,
+	struct msix_entry *entries, int nvec);
+extern void pci_msix_shutdown(struct pci_dev *dev);
+extern void pci_disable_msix(struct pci_dev *dev);
+extern void msi_remove_pci_irq_vectors(struct pci_dev *dev);
+extern void pci_restore_msi_state(struct pci_dev *dev);
+extern int pci_msi_enabled(void);
+#endif
+
+#ifdef CONFIG_PCIEPORTBUS
+extern bool pcie_ports_disabled;
+extern bool pcie_ports_auto;
+#else
+#define pcie_ports_disabled	true
+#define pcie_ports_auto		false
+#endif
+
+#ifndef CONFIG_PCIEASPM
+static inline int pcie_aspm_enabled(void) { return 0; }
+static inline bool pcie_aspm_support_enabled(void) { return false; }
+#else
+extern int pcie_aspm_enabled(void);
+extern bool pcie_aspm_support_enabled(void);
+#endif
+
+#ifdef CONFIG_PCIEAER
+void pci_no_aer(void);
+bool pci_aer_available(void);
+#else
+static inline void pci_no_aer(void) { }
+static inline bool pci_aer_available(void) { return false; }
+#endif
+
+#ifndef CONFIG_PCIE_ECRC
+static inline void pcie_set_ecrc_checking(struct pci_dev *dev)
+{
+	return;
+}
+static inline void pcie_ecrc_get_policy(char *str) {};
+#else
+extern void pcie_set_ecrc_checking(struct pci_dev *dev);
+extern void pcie_ecrc_get_policy(char *str);
+#endif
+
+#define pci_enable_msi(pdev)	pci_enable_msi_block(pdev, 1)
+
+#ifdef CONFIG_HT_IRQ
+/* The functions a driver should call */
+int  ht_create_irq(struct pci_dev *dev, int idx);
+void ht_destroy_irq(unsigned int irq);
+#endif /* CONFIG_HT_IRQ */
+
+extern void pci_cfg_access_lock(struct pci_dev *dev);
+extern bool pci_cfg_access_trylock(struct pci_dev *dev);
+extern void pci_cfg_access_unlock(struct pci_dev *dev);
+
+/*
+ * PCI domain support.  Sometimes called PCI segment (eg by ACPI),
+ * a PCI domain is defined to be a set of PCI busses which share
+ * configuration space.
+ */
+#ifdef CONFIG_PCI_DOMAINS
+extern int pci_domains_supported;
+#else
+enum { pci_domains_supported = 0 };
+static inline int pci_domain_nr(struct pci_bus *bus)
+{
+	return 0;
+}
+
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+	return 0;
+}
+#endif /* CONFIG_PCI_DOMAINS */
+
+/* some architectures require additional setup to direct VGA traffic */
+typedef int (*arch_set_vga_state_t)(struct pci_dev *pdev, bool decode,
+		      unsigned int command_bits, u32 flags);
+extern void pci_register_set_vga_state(arch_set_vga_state_t func);
+
+#else /* CONFIG_PCI is not enabled */
+
+/*
+ *  If the system does not have PCI, clearly these return errors.  Define
+ *  these as simple inline functions to avoid hair in drivers.
+ */
+
+#define _PCI_NOP(o, s, t) \
+	static inline int pci_##o##_config_##s(struct pci_dev *dev, \
+						int where, t val) \
+		{ return PCIBIOS_FUNC_NOT_SUPPORTED; }
+
+#define _PCI_NOP_ALL(o, x)	_PCI_NOP(o, byte, u8 x) \
+				_PCI_NOP(o, word, u16 x) \
+				_PCI_NOP(o, dword, u32 x)
+_PCI_NOP_ALL(read, *)
+_PCI_NOP_ALL(write,)
+
+static inline struct pci_dev *pci_get_device(unsigned int vendor,
+					     unsigned int device,
+					     struct pci_dev *from)
+{
+	return NULL;
+}
+
+static inline struct pci_dev *pci_get_subsys(unsigned int vendor,
+					     unsigned int device,
+					     unsigned int ss_vendor,
+					     unsigned int ss_device,
+					     struct pci_dev *from)
+{
+	return NULL;
+}
+
+static inline struct pci_dev *pci_get_class(unsigned int class,
+					    struct pci_dev *from)
+{
+	return NULL;
+}
+
+#define pci_dev_present(ids)	(0)
+#define no_pci_devices()	(1)
+#define pci_dev_put(dev)	do { } while (0)
+
+static inline void pci_set_master(struct pci_dev *dev)
+{ }
+
+static inline int pci_enable_device(struct pci_dev *dev)
+{
+	return -EIO;
+}
+
+static inline void pci_disable_device(struct pci_dev *dev)
+{ }
+
+static inline int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
+{
+	return -EIO;
+}
+
+static inline int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
+{
+	return -EIO;
+}
+
+static inline int pci_set_dma_max_seg_size(struct pci_dev *dev,
+					unsigned int size)
+{
+	return -EIO;
+}
+
+static inline int pci_set_dma_seg_boundary(struct pci_dev *dev,
+					unsigned long mask)
+{
+	return -EIO;
+}
+
+static inline int pci_assign_resource(struct pci_dev *dev, int i)
+{
+	return -EBUSY;
+}
+
+static inline int __pci_register_driver(struct pci_driver *drv,
+					struct module *owner)
+{
+	return 0;
+}
+
+static inline int pci_register_driver(struct pci_driver *drv)
+{
+	return 0;
+}
+
+static inline void pci_unregister_driver(struct pci_driver *drv)
+{ }
+
+static inline int pci_find_capability(struct pci_dev *dev, int cap)
+{
+	return 0;
+}
+
+static inline int pci_find_next_capability(struct pci_dev *dev, u8 post,
+					   int cap)
+{
+	return 0;
+}
+
+static inline int pci_find_ext_capability(struct pci_dev *dev, int cap)
+{
+	return 0;
+}
+
+/* Power management related routines */
+static inline int pci_save_state(struct pci_dev *dev)
+{
+	return 0;
+}
+
+static inline void pci_restore_state(struct pci_dev *dev)
+{ }
+
+static inline int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
+{
+	return 0;
+}
+
+static inline int pci_wake_from_d3(struct pci_dev *dev, bool enable)
+{
+	return 0;
+}
+
+static inline pci_power_t pci_choose_state(struct pci_dev *dev,
+					   pm_message_t state)
+{
+	return PCI_D0;
+}
+
+static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state,
+				  int enable)
+{
+	return 0;
+}
+
+static inline void pci_enable_ido(struct pci_dev *dev, unsigned long type)
+{
+}
+
+static inline void pci_disable_ido(struct pci_dev *dev, unsigned long type)
+{
+}
+
+static inline int pci_enable_obff(struct pci_dev *dev, unsigned long type)
+{
+	return 0;
+}
+
+static inline void pci_disable_obff(struct pci_dev *dev)
+{
+}
+
+static inline int pci_request_regions(struct pci_dev *dev, const char *res_name)
+{
+	return -EIO;
+}
+
+static inline void pci_release_regions(struct pci_dev *dev)
+{ }
+
+#define pci_dma_burst_advice(pdev, strat, strategy_parameter) do { } while (0)
+
+static inline void pci_block_cfg_access(struct pci_dev *dev)
+{ }
+
+static inline int pci_block_cfg_access_in_atomic(struct pci_dev *dev)
+{ return 0; }
+
+static inline void pci_unblock_cfg_access(struct pci_dev *dev)
+{ }
+
+static inline struct pci_bus *pci_find_next_bus(const struct pci_bus *from)
+{ return NULL; }
+
+static inline struct pci_dev *pci_get_slot(struct pci_bus *bus,
+						unsigned int devfn)
+{ return NULL; }
+
+static inline struct pci_dev *pci_get_bus_and_slot(unsigned int bus,
+						unsigned int devfn)
+{ return NULL; }
+
+static inline int pci_domain_nr(struct pci_bus *bus)
+{ return 0; }
+
+#define dev_is_pci(d) (false)
+#define dev_is_pf(d) (false)
+#define dev_num_vf(d) (0)
+#endif /* CONFIG_PCI */
+
+/* Include architecture-dependent settings and functions */
+
+#include <asm/pci.h>
+
+#ifndef PCIBIOS_MAX_MEM_32
+#define PCIBIOS_MAX_MEM_32 (-1)
+#endif
+
+/* these helpers provide future and backwards compatibility
+ * for accessing popular PCI BAR info */
+#define pci_resource_start(dev, bar)	((dev)->resource[(bar)].start)
+#define pci_resource_end(dev, bar)	((dev)->resource[(bar)].end)
+#define pci_resource_flags(dev, bar)	((dev)->resource[(bar)].flags)
+#define pci_resource_len(dev,bar) \
+	((pci_resource_start((dev), (bar)) == 0 &&	\
+	  pci_resource_end((dev), (bar)) ==		\
+	  pci_resource_start((dev), (bar))) ? 0 :	\
+							\
+	 (pci_resource_end((dev), (bar)) -		\
+	  pci_resource_start((dev), (bar)) + 1))
+
+/* Similar to the helpers above, these manipulate per-pci_dev
+ * driver-specific data.  They are really just a wrapper around
+ * the generic device structure functions of these calls.
+ */
+static inline void *pci_get_drvdata(struct pci_dev *pdev)
+{
+	return dev_get_drvdata(&pdev->dev);
+}
+
+static inline void pci_set_drvdata(struct pci_dev *pdev, void *data)
+{
+	dev_set_drvdata(&pdev->dev, data);
+}
+
+/* If you want to know what to call your pci_dev, ask this function.
+ * Again, it's a wrapper around the generic device.
+ */
+static inline const char *pci_name(const struct pci_dev *pdev)
+{
+	return dev_name(&pdev->dev);
+}
+
+
+/* Some archs don't want to expose struct resource to userland as-is
+ * in sysfs and /proc
+ */
+#ifndef HAVE_ARCH_PCI_RESOURCE_TO_USER
+static inline void pci_resource_to_user(const struct pci_dev *dev, int bar,
+		const struct resource *rsrc, resource_size_t *start,
+		resource_size_t *end)
+{
+	*start = rsrc->start;
+	*end = rsrc->end;
+}
+#endif /* HAVE_ARCH_PCI_RESOURCE_TO_USER */
+
+
+/*
+ *  The world is not perfect and supplies us with broken PCI devices.
+ *  For at least a part of these bugs we need a work-around, so both
+ *  generic (drivers/pci/quirks.c) and per-architecture code can define
+ *  fixup hooks to be called for particular buggy devices.
+ */
+
+struct pci_fixup {
+	u16 vendor;		/* You can use PCI_ANY_ID here of course */
+	u16 device;		/* You can use PCI_ANY_ID here of course */
+	u32 class;		/* You can use PCI_ANY_ID here too */
+	unsigned int class_shift;	/* should be 0, 8, 16 */
+	void (*hook)(struct pci_dev *dev);
+};
+
+enum pci_fixup_pass {
+	pci_fixup_early,	/* Before probing BARs */
+	pci_fixup_header,	/* After reading configuration header */
+	pci_fixup_final,	/* Final phase of device fixups */
+	pci_fixup_enable,	/* pci_enable_device() time */
+	pci_fixup_resume,	/* pci_device_resume() */
+	pci_fixup_suspend,	/* pci_device_suspend */
+	pci_fixup_resume_early, /* pci_device_resume_early() */
+};
+
+/* Anonymous variables would be nice... */
+#define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, class,	\
+				  class_shift, hook)			\
+	static const struct pci_fixup const __pci_fixup_##name __used	\
+	__attribute__((__section__(#section), aligned((sizeof(void *)))))    \
+		= { vendor, device, class, class_shift, hook };
+
+#define DECLARE_PCI_FIXUP_CLASS_EARLY(vendor, device, class,		\
+					 class_shift, hook)		\
+	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early,			\
+		vendor##device##hook, vendor, device, class, class_shift, hook)
+#define DECLARE_PCI_FIXUP_CLASS_HEADER(vendor, device, class,		\
+					 class_shift, hook)		\
+	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header,			\
+		vendor##device##hook, vendor, device, class, class_shift, hook)
+#define DECLARE_PCI_FIXUP_CLASS_FINAL(vendor, device, class,		\
+					 class_shift, hook)		\
+	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final,			\
+		vendor##device##hook, vendor, device, class, class_shift, hook)
+#define DECLARE_PCI_FIXUP_CLASS_ENABLE(vendor, device, class,		\
+					 class_shift, hook)		\
+	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable,			\
+		vendor##device##hook, vendor, device, class, class_shift, hook)
+#define DECLARE_PCI_FIXUP_CLASS_RESUME(vendor, device, class,		\
+					 class_shift, hook)		\
+	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume,			\
+		resume##vendor##device##hook, vendor, device, class,	\
+		class_shift, hook)
+#define DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(vendor, device, class,	\
+					 class_shift, hook)		\
+	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early,		\
+		resume_early##vendor##device##hook, vendor, device,	\
+		class, class_shift, hook)
+#define DECLARE_PCI_FIXUP_CLASS_SUSPEND(vendor, device, class,		\
+					 class_shift, hook)		\
+	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend,			\
+		suspend##vendor##device##hook, vendor, device, class,	\
+		class_shift, hook)
+
+#define DECLARE_PCI_FIXUP_EARLY(vendor, device, hook)			\
+	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early,			\
+		vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook)
+#define DECLARE_PCI_FIXUP_HEADER(vendor, device, hook)			\
+	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header,			\
+		vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook)
+#define DECLARE_PCI_FIXUP_FINAL(vendor, device, hook)			\
+	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final,			\
+		vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook)
+#define DECLARE_PCI_FIXUP_ENABLE(vendor, device, hook)			\
+	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable,			\
+		vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook)
+#define DECLARE_PCI_FIXUP_RESUME(vendor, device, hook)			\
+	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume,			\
+		resume##vendor##device##hook, vendor, device,		\
+		PCI_ANY_ID, 0, hook)
+#define DECLARE_PCI_FIXUP_RESUME_EARLY(vendor, device, hook)		\
+	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early,		\
+		resume_early##vendor##device##hook, vendor, device,	\
+		PCI_ANY_ID, 0, hook)
+#define DECLARE_PCI_FIXUP_SUSPEND(vendor, device, hook)			\
+	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend,			\
+		suspend##vendor##device##hook, vendor, device,		\
+		PCI_ANY_ID, 0, hook)
+
+#ifdef CONFIG_PCI_QUIRKS
+void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev);
+#else
+static inline void pci_fixup_device(enum pci_fixup_pass pass,
+				    struct pci_dev *dev) {}
+#endif
+
+void __iomem *pcim_iomap(struct pci_dev *pdev, int bar, unsigned long maxlen);
+void pcim_iounmap(struct pci_dev *pdev, void __iomem *addr);
+void __iomem * const *pcim_iomap_table(struct pci_dev *pdev);
+int pcim_iomap_regions(struct pci_dev *pdev, int mask, const char *name);
+int pcim_iomap_regions_request_all(struct pci_dev *pdev, int mask,
+				   const char *name);
+void pcim_iounmap_regions(struct pci_dev *pdev, int mask);
+
+extern int pci_pci_problems;
+#define PCIPCI_FAIL		1	/* No PCI PCI DMA */
+#define PCIPCI_TRITON		2
+#define PCIPCI_NATOMA		4
+#define PCIPCI_VIAETBF		8
+#define PCIPCI_VSFX		16
+#define PCIPCI_ALIMAGIK		32	/* Need low latency setting */
+#define PCIAGP_FAIL		64	/* No PCI to AGP DMA */
+
+extern unsigned long pci_cardbus_io_size;
+extern unsigned long pci_cardbus_mem_size;
+extern u8 __devinitdata pci_dfl_cache_line_size;
+extern u8 pci_cache_line_size;
+
+extern unsigned long pci_hotplug_io_size;
+extern unsigned long pci_hotplug_mem_size;
+
+/* Architecture specific versions may override these (weak) */
+int pcibios_add_platform_entries(struct pci_dev *dev);
+void pcibios_disable_device(struct pci_dev *dev);
+void pcibios_set_master(struct pci_dev *dev);
+int pcibios_set_pcie_reset_state(struct pci_dev *dev,
+				 enum pcie_reset_state state);
+
+#ifdef CONFIG_PCI_MMCONFIG
+extern void __init pci_mmcfg_early_init(void);
+extern void __init pci_mmcfg_late_init(void);
+#else
+static inline void pci_mmcfg_early_init(void) { }
+static inline void pci_mmcfg_late_init(void) { }
+#endif
+
+int pci_ext_cfg_avail(struct pci_dev *dev);
+
+void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar);
+
+#ifdef CONFIG_PCI_IOV
+extern int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn);
+extern void pci_disable_sriov(struct pci_dev *dev);
+extern irqreturn_t pci_sriov_migration(struct pci_dev *dev);
+extern int pci_num_vf(struct pci_dev *dev);
+#else
+static inline int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn)
+{
+	return -ENODEV;
+}
+static inline void pci_disable_sriov(struct pci_dev *dev)
+{
+}
+static inline irqreturn_t pci_sriov_migration(struct pci_dev *dev)
+{
+	return IRQ_NONE;
+}
+static inline int pci_num_vf(struct pci_dev *dev)
+{
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_HOTPLUG_PCI) || defined(CONFIG_HOTPLUG_PCI_MODULE)
+extern void pci_hp_create_module_link(struct pci_slot *pci_slot);
+extern void pci_hp_remove_module_link(struct pci_slot *pci_slot);
+#endif
+
+/**
+ * pci_pcie_cap - get the saved PCIe capability offset
+ * @dev: PCI device
+ *
+ * PCIe capability offset is calculated at PCI device initialization
+ * time and saved in the data structure. This function returns saved
+ * PCIe capability offset. Using this instead of pci_find_capability()
+ * reduces unnecessary search in the PCI configuration space. If you
+ * need to calculate PCIe capability offset from raw device for some
+ * reasons, please use pci_find_capability() instead.
+ */
+static inline int pci_pcie_cap(struct pci_dev *dev)
+{
+	return dev->pcie_cap;
+}
+
+/**
+ * pci_is_pcie - check if the PCI device is PCI Express capable
+ * @dev: PCI device
+ *
+ * Retrun true if the PCI device is PCI Express capable, false otherwise.
+ */
+static inline bool pci_is_pcie(struct pci_dev *dev)
+{
+	return !!pci_pcie_cap(dev);
+}
+
+void pci_request_acs(void);
+
+
+#define PCI_VPD_LRDT			0x80	/* Large Resource Data Type */
+#define PCI_VPD_LRDT_ID(x)		(x | PCI_VPD_LRDT)
+
+/* Large Resource Data Type Tag Item Names */
+#define PCI_VPD_LTIN_ID_STRING		0x02	/* Identifier String */
+#define PCI_VPD_LTIN_RO_DATA		0x10	/* Read-Only Data */
+#define PCI_VPD_LTIN_RW_DATA		0x11	/* Read-Write Data */
+
+#define PCI_VPD_LRDT_ID_STRING		PCI_VPD_LRDT_ID(PCI_VPD_LTIN_ID_STRING)
+#define PCI_VPD_LRDT_RO_DATA		PCI_VPD_LRDT_ID(PCI_VPD_LTIN_RO_DATA)
+#define PCI_VPD_LRDT_RW_DATA		PCI_VPD_LRDT_ID(PCI_VPD_LTIN_RW_DATA)
+
+/* Small Resource Data Type Tag Item Names */
+#define PCI_VPD_STIN_END		0x78	/* End */
+
+#define PCI_VPD_SRDT_END		PCI_VPD_STIN_END
+
+#define PCI_VPD_SRDT_TIN_MASK		0x78
+#define PCI_VPD_SRDT_LEN_MASK		0x07
+
+#define PCI_VPD_LRDT_TAG_SIZE		3
+#define PCI_VPD_SRDT_TAG_SIZE		1
+
+#define PCI_VPD_INFO_FLD_HDR_SIZE	3
+
+#define PCI_VPD_RO_KEYWORD_PARTNO	"PN"
+#define PCI_VPD_RO_KEYWORD_MFR_ID	"MN"
+#define PCI_VPD_RO_KEYWORD_VENDOR0	"V0"
+#define PCI_VPD_RO_KEYWORD_CHKSUM	"RV"
+
+/**
+ * pci_vpd_lrdt_size - Extracts the Large Resource Data Type length
+ * @lrdt: Pointer to the beginning of the Large Resource Data Type tag
+ *
+ * Returns the extracted Large Resource Data Type length.
+ */
+static inline u16 pci_vpd_lrdt_size(const u8 *lrdt)
+{
+	return (u16)lrdt[1] + ((u16)lrdt[2] << 8);
+}
+
+/**
+ * pci_vpd_srdt_size - Extracts the Small Resource Data Type length
+ * @lrdt: Pointer to the beginning of the Small Resource Data Type tag
+ *
+ * Returns the extracted Small Resource Data Type length.
+ */
+static inline u8 pci_vpd_srdt_size(const u8 *srdt)
+{
+	return (*srdt) & PCI_VPD_SRDT_LEN_MASK;
+}
+
+/**
+ * pci_vpd_info_field_size - Extracts the information field length
+ * @lrdt: Pointer to the beginning of an information field header
+ *
+ * Returns the extracted information field length.
+ */
+static inline u8 pci_vpd_info_field_size(const u8 *info_field)
+{
+	return info_field[2];
+}
+
+/**
+ * pci_vpd_find_tag - Locates the Resource Data Type tag provided
+ * @buf: Pointer to buffered vpd data
+ * @off: The offset into the buffer at which to begin the search
+ * @len: The length of the vpd buffer
+ * @rdt: The Resource Data Type to search for
+ *
+ * Returns the index where the Resource Data Type was found or
+ * -ENOENT otherwise.
+ */
+int pci_vpd_find_tag(const u8 *buf, unsigned int off, unsigned int len, u8 rdt);
+
+/**
+ * pci_vpd_find_info_keyword - Locates an information field keyword in the VPD
+ * @buf: Pointer to buffered vpd data
+ * @off: The offset into the buffer at which to begin the search
+ * @len: The length of the buffer area, relative to off, in which to search
+ * @kw: The keyword to search for
+ *
+ * Returns the index where the information field keyword was found or
+ * -ENOENT otherwise.
+ */
+int pci_vpd_find_info_keyword(const u8 *buf, unsigned int off,
+			      unsigned int len, const char *kw);
+
+/* PCI <-> OF binding helpers */
+#ifdef CONFIG_OF
+struct device_node;
+extern void pci_set_of_node(struct pci_dev *dev);
+extern void pci_release_of_node(struct pci_dev *dev);
+extern void pci_set_bus_of_node(struct pci_bus *bus);
+extern void pci_release_bus_of_node(struct pci_bus *bus);
+
+/* Arch may override this (weak) */
+extern struct device_node * __weak pcibios_get_phb_of_node(struct pci_bus *bus);
+
+static inline struct device_node *pci_device_to_OF_node(struct pci_dev *pdev)
+{
+	return pdev ? pdev->dev.of_node : NULL;
+}
+
+static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
+{
+	return bus ? bus->dev.of_node : NULL;
+}
+
+#else /* CONFIG_OF */
+static inline void pci_set_of_node(struct pci_dev *dev) { }
+static inline void pci_release_of_node(struct pci_dev *dev) { }
+static inline void pci_set_bus_of_node(struct pci_bus *bus) { }
+static inline void pci_release_bus_of_node(struct pci_bus *bus) { }
+#endif  /* CONFIG_OF */
+
+#ifdef CONFIG_EEH
+static inline struct eeh_dev *pci_dev_to_eeh_dev(struct pci_dev *pdev)
+{
+	return pdev->dev.archdata.edev;
+}
+#endif
+
+/**
+ * pci_find_upstream_pcie_bridge - find upstream PCIe-to-PCI bridge of a device
+ * @pdev: the PCI device
+ *
+ * if the device is PCIE, return NULL
+ * if the device isn't connected to a PCIe bridge (that is its parent is a
+ * legacy PCI bridge and the bridge is directly connected to bus 0), return its
+ * parent
+ */
+struct pci_dev *pci_find_upstream_pcie_bridge(struct pci_dev *pdev);
+
+#endif /* __KERNEL__ */
+#endif /* LINUX_PCI_H */
diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h
new file mode 100644
index 00000000..45fc162c
--- /dev/null
+++ b/include/linux/pci_hotplug.h
@@ -0,0 +1,203 @@
+/*
+ * PCI HotPlug Core Functions
+ *
+ * Copyright (C) 1995,2001 Compaq Computer Corporation
+ * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2001 IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <kristen.c.accardi@intel.com>
+ *
+ */
+#ifndef _PCI_HOTPLUG_H
+#define _PCI_HOTPLUG_H
+
+/* These values come from the PCI Express Spec */
+enum pcie_link_width {
+	PCIE_LNK_WIDTH_RESRV	= 0x00,
+	PCIE_LNK_X1		= 0x01,
+	PCIE_LNK_X2		= 0x02,
+	PCIE_LNK_X4		= 0x04,
+	PCIE_LNK_X8		= 0x08,
+	PCIE_LNK_X12		= 0x0C,
+	PCIE_LNK_X16		= 0x10,
+	PCIE_LNK_X32		= 0x20,
+	PCIE_LNK_WIDTH_UNKNOWN  = 0xFF,
+};
+
+/**
+ * struct hotplug_slot_ops -the callbacks that the hotplug pci core can use
+ * @owner: The module owner of this structure
+ * @mod_name: The module name (KBUILD_MODNAME) of this structure
+ * @enable_slot: Called when the user wants to enable a specific pci slot
+ * @disable_slot: Called when the user wants to disable a specific pci slot
+ * @set_attention_status: Called to set the specific slot's attention LED to
+ * the specified value
+ * @hardware_test: Called to run a specified hardware test on the specified
+ * slot.
+ * @get_power_status: Called to get the current power status of a slot.
+ * 	If this field is NULL, the value passed in the struct hotplug_slot_info
+ * 	will be used when this value is requested by a user.
+ * @get_attention_status: Called to get the current attention status of a slot.
+ *	If this field is NULL, the value passed in the struct hotplug_slot_info
+ *	will be used when this value is requested by a user.
+ * @get_latch_status: Called to get the current latch status of a slot.
+ *	If this field is NULL, the value passed in the struct hotplug_slot_info
+ *	will be used when this value is requested by a user.
+ * @get_adapter_status: Called to get see if an adapter is present in the slot or not.
+ *	If this field is NULL, the value passed in the struct hotplug_slot_info
+ *	will be used when this value is requested by a user.
+ *
+ * The table of function pointers that is passed to the hotplug pci core by a
+ * hotplug pci driver.  These functions are called by the hotplug pci core when
+ * the user wants to do something to a specific slot (query it for information,
+ * set an LED, enable / disable power, etc.)
+ */
+struct hotplug_slot_ops {
+	struct module *owner;
+	const char *mod_name;
+	int (*enable_slot)		(struct hotplug_slot *slot);
+	int (*disable_slot)		(struct hotplug_slot *slot);
+	int (*set_attention_status)	(struct hotplug_slot *slot, u8 value);
+	int (*hardware_test)		(struct hotplug_slot *slot, u32 value);
+	int (*get_power_status)		(struct hotplug_slot *slot, u8 *value);
+	int (*get_attention_status)	(struct hotplug_slot *slot, u8 *value);
+	int (*get_latch_status)		(struct hotplug_slot *slot, u8 *value);
+	int (*get_adapter_status)	(struct hotplug_slot *slot, u8 *value);
+};
+
+/**
+ * struct hotplug_slot_info - used to notify the hotplug pci core of the state of the slot
+ * @power_status: if power is enabled or not (1/0)
+ * @attention_status: if the attention light is enabled or not (1/0)
+ * @latch_status: if the latch (if any) is open or closed (1/0)
+ * @adapter_status: if there is a pci board present in the slot or not (1/0)
+ *
+ * Used to notify the hotplug pci core of the status of a specific slot.
+ */
+struct hotplug_slot_info {
+	u8	power_status;
+	u8	attention_status;
+	u8	latch_status;
+	u8	adapter_status;
+};
+
+/**
+ * struct hotplug_slot - used to register a physical slot with the hotplug pci core
+ * @ops: pointer to the &struct hotplug_slot_ops to be used for this slot
+ * @info: pointer to the &struct hotplug_slot_info for the initial values for
+ * this slot.
+ * @release: called during pci_hp_deregister to free memory allocated in a
+ * hotplug_slot structure.
+ * @private: used by the hotplug pci controller driver to store whatever it
+ * needs.
+ */
+struct hotplug_slot {
+	struct hotplug_slot_ops		*ops;
+	struct hotplug_slot_info	*info;
+	void (*release) (struct hotplug_slot *slot);
+	void				*private;
+
+	/* Variables below this are for use only by the hotplug pci core. */
+	struct list_head		slot_list;
+	struct pci_slot			*pci_slot;
+};
+#define to_hotplug_slot(n) container_of(n, struct hotplug_slot, kobj)
+
+static inline const char *hotplug_slot_name(const struct hotplug_slot *slot)
+{
+	return pci_slot_name(slot->pci_slot);
+}
+
+extern int __pci_hp_register(struct hotplug_slot *slot, struct pci_bus *pbus,
+			     int nr, const char *name,
+			     struct module *owner, const char *mod_name);
+extern int pci_hp_deregister(struct hotplug_slot *slot);
+extern int __must_check pci_hp_change_slot_info	(struct hotplug_slot *slot,
+						 struct hotplug_slot_info *info);
+
+/* use a define to avoid include chaining to get THIS_MODULE & friends */
+#define pci_hp_register(slot, pbus, devnr, name) \
+	__pci_hp_register(slot, pbus, devnr, name, THIS_MODULE, KBUILD_MODNAME)
+
+/* PCI Setting Record (Type 0) */
+struct hpp_type0 {
+	u32 revision;
+	u8  cache_line_size;
+	u8  latency_timer;
+	u8  enable_serr;
+	u8  enable_perr;
+};
+
+/* PCI-X Setting Record (Type 1) */
+struct hpp_type1 {
+	u32 revision;
+	u8  max_mem_read;
+	u8  avg_max_split;
+	u16 tot_max_split;
+};
+
+/* PCI Express Setting Record (Type 2) */
+struct hpp_type2 {
+	u32 revision;
+	u32 unc_err_mask_and;
+	u32 unc_err_mask_or;
+	u32 unc_err_sever_and;
+	u32 unc_err_sever_or;
+	u32 cor_err_mask_and;
+	u32 cor_err_mask_or;
+	u32 adv_err_cap_and;
+	u32 adv_err_cap_or;
+	u16 pci_exp_devctl_and;
+	u16 pci_exp_devctl_or;
+	u16 pci_exp_lnkctl_and;
+	u16 pci_exp_lnkctl_or;
+	u32 sec_unc_err_sever_and;
+	u32 sec_unc_err_sever_or;
+	u32 sec_unc_err_mask_and;
+	u32 sec_unc_err_mask_or;
+};
+
+struct hotplug_params {
+	struct hpp_type0 *t0;		/* Type0: NULL if not available */
+	struct hpp_type1 *t1;		/* Type1: NULL if not available */
+	struct hpp_type2 *t2;		/* Type2: NULL if not available */
+	struct hpp_type0 type0_data;
+	struct hpp_type1 type1_data;
+	struct hpp_type2 type2_data;
+};
+
+#ifdef CONFIG_ACPI
+#include <acpi/acpi.h>
+#include <acpi/acpi_bus.h>
+int pci_get_hp_params(struct pci_dev *dev, struct hotplug_params *hpp);
+int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags);
+int acpi_pci_check_ejectable(struct pci_bus *pbus, acpi_handle handle);
+int acpi_pci_detect_ejectable(acpi_handle handle);
+#else
+static inline int pci_get_hp_params(struct pci_dev *dev,
+				    struct hotplug_params *hpp)
+{
+	return -ENODEV;
+}
+#endif
+
+void pci_configure_slot(struct pci_dev *dev);
+#endif
+
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
new file mode 100644
index 00000000..3329965e
--- /dev/null
+++ b/include/linux/pci_ids.h
@@ -0,0 +1,2907 @@
+/*
+ *	PCI Class, Vendor and Device IDs
+ *
+ *	Please keep sorted.
+ *
+ *	Do not add new entries to this file unless the definitions
+ *	are shared between multiple drivers.
+ */
+
+/* Device classes and subclasses */
+
+#define PCI_CLASS_NOT_DEFINED		0x0000
+#define PCI_CLASS_NOT_DEFINED_VGA	0x0001
+
+#define PCI_BASE_CLASS_STORAGE		0x01
+#define PCI_CLASS_STORAGE_SCSI		0x0100
+#define PCI_CLASS_STORAGE_IDE		0x0101
+#define PCI_CLASS_STORAGE_FLOPPY	0x0102
+#define PCI_CLASS_STORAGE_IPI		0x0103
+#define PCI_CLASS_STORAGE_RAID		0x0104
+#define PCI_CLASS_STORAGE_SATA		0x0106
+#define PCI_CLASS_STORAGE_SATA_AHCI	0x010601
+#define PCI_CLASS_STORAGE_SAS		0x0107
+#define PCI_CLASS_STORAGE_OTHER		0x0180
+
+#define PCI_BASE_CLASS_NETWORK		0x02
+#define PCI_CLASS_NETWORK_ETHERNET	0x0200
+#define PCI_CLASS_NETWORK_TOKEN_RING	0x0201
+#define PCI_CLASS_NETWORK_FDDI		0x0202
+#define PCI_CLASS_NETWORK_ATM		0x0203
+#define PCI_CLASS_NETWORK_OTHER		0x0280
+
+#define PCI_BASE_CLASS_DISPLAY		0x03
+#define PCI_CLASS_DISPLAY_VGA		0x0300
+#define PCI_CLASS_DISPLAY_XGA		0x0301
+#define PCI_CLASS_DISPLAY_3D		0x0302
+#define PCI_CLASS_DISPLAY_OTHER		0x0380
+
+#define PCI_BASE_CLASS_MULTIMEDIA	0x04
+#define PCI_CLASS_MULTIMEDIA_VIDEO	0x0400
+#define PCI_CLASS_MULTIMEDIA_AUDIO	0x0401
+#define PCI_CLASS_MULTIMEDIA_PHONE	0x0402
+#define PCI_CLASS_MULTIMEDIA_OTHER	0x0480
+
+#define PCI_BASE_CLASS_MEMORY		0x05
+#define PCI_CLASS_MEMORY_RAM		0x0500
+#define PCI_CLASS_MEMORY_FLASH		0x0501
+#define PCI_CLASS_MEMORY_OTHER		0x0580
+
+#define PCI_BASE_CLASS_BRIDGE		0x06
+#define PCI_CLASS_BRIDGE_HOST		0x0600
+#define PCI_CLASS_BRIDGE_ISA		0x0601
+#define PCI_CLASS_BRIDGE_EISA		0x0602
+#define PCI_CLASS_BRIDGE_MC		0x0603
+#define PCI_CLASS_BRIDGE_PCI		0x0604
+#define PCI_CLASS_BRIDGE_PCMCIA		0x0605
+#define PCI_CLASS_BRIDGE_NUBUS		0x0606
+#define PCI_CLASS_BRIDGE_CARDBUS	0x0607
+#define PCI_CLASS_BRIDGE_RACEWAY	0x0608
+#define PCI_CLASS_BRIDGE_OTHER		0x0680
+
+#define PCI_BASE_CLASS_COMMUNICATION	0x07
+#define PCI_CLASS_COMMUNICATION_SERIAL	0x0700
+#define PCI_CLASS_COMMUNICATION_PARALLEL 0x0701
+#define PCI_CLASS_COMMUNICATION_MULTISERIAL 0x0702
+#define PCI_CLASS_COMMUNICATION_MODEM	0x0703
+#define PCI_CLASS_COMMUNICATION_OTHER	0x0780
+
+#define PCI_BASE_CLASS_SYSTEM		0x08
+#define PCI_CLASS_SYSTEM_PIC		0x0800
+#define PCI_CLASS_SYSTEM_PIC_IOAPIC	0x080010
+#define PCI_CLASS_SYSTEM_PIC_IOXAPIC	0x080020
+#define PCI_CLASS_SYSTEM_DMA		0x0801
+#define PCI_CLASS_SYSTEM_TIMER		0x0802
+#define PCI_CLASS_SYSTEM_RTC		0x0803
+#define PCI_CLASS_SYSTEM_PCI_HOTPLUG	0x0804
+#define PCI_CLASS_SYSTEM_SDHCI		0x0805
+#define PCI_CLASS_SYSTEM_OTHER		0x0880
+
+#define PCI_BASE_CLASS_INPUT		0x09
+#define PCI_CLASS_INPUT_KEYBOARD	0x0900
+#define PCI_CLASS_INPUT_PEN		0x0901
+#define PCI_CLASS_INPUT_MOUSE		0x0902
+#define PCI_CLASS_INPUT_SCANNER		0x0903
+#define PCI_CLASS_INPUT_GAMEPORT	0x0904
+#define PCI_CLASS_INPUT_OTHER		0x0980
+
+#define PCI_BASE_CLASS_DOCKING		0x0a
+#define PCI_CLASS_DOCKING_GENERIC	0x0a00
+#define PCI_CLASS_DOCKING_OTHER		0x0a80
+
+#define PCI_BASE_CLASS_PROCESSOR	0x0b
+#define PCI_CLASS_PROCESSOR_386		0x0b00
+#define PCI_CLASS_PROCESSOR_486		0x0b01
+#define PCI_CLASS_PROCESSOR_PENTIUM	0x0b02
+#define PCI_CLASS_PROCESSOR_ALPHA	0x0b10
+#define PCI_CLASS_PROCESSOR_POWERPC	0x0b20
+#define PCI_CLASS_PROCESSOR_MIPS	0x0b30
+#define PCI_CLASS_PROCESSOR_CO		0x0b40
+
+#define PCI_BASE_CLASS_SERIAL		0x0c
+#define PCI_CLASS_SERIAL_FIREWIRE	0x0c00
+#define PCI_CLASS_SERIAL_FIREWIRE_OHCI	0x0c0010
+#define PCI_CLASS_SERIAL_ACCESS		0x0c01
+#define PCI_CLASS_SERIAL_SSA		0x0c02
+#define PCI_CLASS_SERIAL_USB		0x0c03
+#define PCI_CLASS_SERIAL_USB_UHCI	0x0c0300
+#define PCI_CLASS_SERIAL_USB_OHCI	0x0c0310
+#define PCI_CLASS_SERIAL_USB_EHCI	0x0c0320
+#define PCI_CLASS_SERIAL_USB_XHCI	0x0c0330
+#define PCI_CLASS_SERIAL_FIBER		0x0c04
+#define PCI_CLASS_SERIAL_SMBUS		0x0c05
+
+#define PCI_BASE_CLASS_WIRELESS			0x0d
+#define PCI_CLASS_WIRELESS_RF_CONTROLLER	0x0d10
+#define PCI_CLASS_WIRELESS_WHCI			0x0d1010
+
+#define PCI_BASE_CLASS_INTELLIGENT	0x0e
+#define PCI_CLASS_INTELLIGENT_I2O	0x0e00
+
+#define PCI_BASE_CLASS_SATELLITE	0x0f
+#define PCI_CLASS_SATELLITE_TV		0x0f00
+#define PCI_CLASS_SATELLITE_AUDIO	0x0f01
+#define PCI_CLASS_SATELLITE_VOICE	0x0f03
+#define PCI_CLASS_SATELLITE_DATA	0x0f04
+
+#define PCI_BASE_CLASS_CRYPT		0x10
+#define PCI_CLASS_CRYPT_NETWORK		0x1000
+#define PCI_CLASS_CRYPT_ENTERTAINMENT	0x1001
+#define PCI_CLASS_CRYPT_OTHER		0x1080
+
+#define PCI_BASE_CLASS_SIGNAL_PROCESSING 0x11
+#define PCI_CLASS_SP_DPIO		0x1100
+#define PCI_CLASS_SP_OTHER		0x1180
+
+#define PCI_CLASS_OTHERS		0xff
+
+/* Vendors and devices.  Sort key: vendor first, device next. */
+
+#define PCI_VENDOR_ID_TTTECH		0x0357
+#define PCI_DEVICE_ID_TTTECH_MC322	0x000a
+
+#define PCI_VENDOR_ID_DYNALINK		0x0675
+#define PCI_DEVICE_ID_DYNALINK_IS64PH	0x1702
+
+#define PCI_VENDOR_ID_BERKOM			0x0871
+#define PCI_DEVICE_ID_BERKOM_A1T		0xffa1
+#define PCI_DEVICE_ID_BERKOM_T_CONCEPT		0xffa2
+#define PCI_DEVICE_ID_BERKOM_A4T		0xffa4
+#define PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO	0xffa8
+
+#define PCI_VENDOR_ID_COMPAQ		0x0e11
+#define PCI_DEVICE_ID_COMPAQ_TOKENRING	0x0508
+#define PCI_DEVICE_ID_COMPAQ_TACHYON	0xa0fc
+#define PCI_DEVICE_ID_COMPAQ_SMART2P	0xae10
+#define PCI_DEVICE_ID_COMPAQ_NETEL100	0xae32
+#define PCI_DEVICE_ID_COMPAQ_NETEL10	0xae34
+#define PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE 0xae33
+#define PCI_DEVICE_ID_COMPAQ_NETFLEX3I	0xae35
+#define PCI_DEVICE_ID_COMPAQ_NETEL100D	0xae40
+#define PCI_DEVICE_ID_COMPAQ_NETEL100PI	0xae43
+#define PCI_DEVICE_ID_COMPAQ_NETEL100I	0xb011
+#define PCI_DEVICE_ID_COMPAQ_CISS	0xb060
+#define PCI_DEVICE_ID_COMPAQ_CISSB	0xb178
+#define PCI_DEVICE_ID_COMPAQ_CISSC	0x46
+#define PCI_DEVICE_ID_COMPAQ_THUNDER	0xf130
+#define PCI_DEVICE_ID_COMPAQ_NETFLEX3B	0xf150
+
+#define PCI_VENDOR_ID_NCR		0x1000
+#define PCI_VENDOR_ID_LSI_LOGIC		0x1000
+#define PCI_DEVICE_ID_NCR_53C810	0x0001
+#define PCI_DEVICE_ID_NCR_53C820	0x0002
+#define PCI_DEVICE_ID_NCR_53C825	0x0003
+#define PCI_DEVICE_ID_NCR_53C815	0x0004
+#define PCI_DEVICE_ID_LSI_53C810AP	0x0005
+#define PCI_DEVICE_ID_NCR_53C860	0x0006
+#define PCI_DEVICE_ID_LSI_53C1510	0x000a
+#define PCI_DEVICE_ID_NCR_53C896	0x000b
+#define PCI_DEVICE_ID_NCR_53C895	0x000c
+#define PCI_DEVICE_ID_NCR_53C885	0x000d
+#define PCI_DEVICE_ID_NCR_53C875	0x000f
+#define PCI_DEVICE_ID_NCR_53C1510	0x0010
+#define PCI_DEVICE_ID_LSI_53C895A	0x0012
+#define PCI_DEVICE_ID_LSI_53C875A	0x0013
+#define PCI_DEVICE_ID_LSI_53C1010_33	0x0020
+#define PCI_DEVICE_ID_LSI_53C1010_66	0x0021
+#define PCI_DEVICE_ID_LSI_53C1030	0x0030
+#define PCI_DEVICE_ID_LSI_1030_53C1035	0x0032
+#define PCI_DEVICE_ID_LSI_53C1035	0x0040
+#define PCI_DEVICE_ID_NCR_53C875J	0x008f
+#define PCI_DEVICE_ID_LSI_FC909		0x0621
+#define PCI_DEVICE_ID_LSI_FC929		0x0622
+#define PCI_DEVICE_ID_LSI_FC929_LAN	0x0623
+#define PCI_DEVICE_ID_LSI_FC919		0x0624
+#define PCI_DEVICE_ID_LSI_FC919_LAN	0x0625
+#define PCI_DEVICE_ID_LSI_FC929X	0x0626
+#define PCI_DEVICE_ID_LSI_FC939X	0x0642
+#define PCI_DEVICE_ID_LSI_FC949X	0x0640
+#define PCI_DEVICE_ID_LSI_FC949ES	0x0646
+#define PCI_DEVICE_ID_LSI_FC919X	0x0628
+#define PCI_DEVICE_ID_NCR_YELLOWFIN	0x0701
+#define PCI_DEVICE_ID_LSI_61C102	0x0901
+#define PCI_DEVICE_ID_LSI_63C815	0x1000
+#define PCI_DEVICE_ID_LSI_SAS1064	0x0050
+#define PCI_DEVICE_ID_LSI_SAS1064R	0x0411
+#define PCI_DEVICE_ID_LSI_SAS1066	0x005E
+#define PCI_DEVICE_ID_LSI_SAS1068	0x0054
+#define PCI_DEVICE_ID_LSI_SAS1064A	0x005C
+#define PCI_DEVICE_ID_LSI_SAS1064E	0x0056
+#define PCI_DEVICE_ID_LSI_SAS1066E	0x005A
+#define PCI_DEVICE_ID_LSI_SAS1068E	0x0058
+#define PCI_DEVICE_ID_LSI_SAS1078	0x0060
+
+#define PCI_VENDOR_ID_ATI		0x1002
+/* Mach64 */
+#define PCI_DEVICE_ID_ATI_68800		0x4158
+#define PCI_DEVICE_ID_ATI_215CT222	0x4354
+#define PCI_DEVICE_ID_ATI_210888CX	0x4358
+#define PCI_DEVICE_ID_ATI_215ET222	0x4554
+/* Mach64 / Rage */
+#define PCI_DEVICE_ID_ATI_215GB		0x4742
+#define PCI_DEVICE_ID_ATI_215GD		0x4744
+#define PCI_DEVICE_ID_ATI_215GI		0x4749
+#define PCI_DEVICE_ID_ATI_215GP		0x4750
+#define PCI_DEVICE_ID_ATI_215GQ		0x4751
+#define PCI_DEVICE_ID_ATI_215XL		0x4752
+#define PCI_DEVICE_ID_ATI_215GT		0x4754
+#define PCI_DEVICE_ID_ATI_215GTB	0x4755
+#define PCI_DEVICE_ID_ATI_215_IV	0x4756
+#define PCI_DEVICE_ID_ATI_215_IW	0x4757
+#define PCI_DEVICE_ID_ATI_215_IZ	0x475A
+#define PCI_DEVICE_ID_ATI_210888GX	0x4758
+#define PCI_DEVICE_ID_ATI_215_LB	0x4c42
+#define PCI_DEVICE_ID_ATI_215_LD	0x4c44
+#define PCI_DEVICE_ID_ATI_215_LG	0x4c47
+#define PCI_DEVICE_ID_ATI_215_LI	0x4c49
+#define PCI_DEVICE_ID_ATI_215_LM	0x4c4D
+#define PCI_DEVICE_ID_ATI_215_LN	0x4c4E
+#define PCI_DEVICE_ID_ATI_215_LR	0x4c52
+#define PCI_DEVICE_ID_ATI_215_LS	0x4c53
+#define PCI_DEVICE_ID_ATI_264_LT	0x4c54
+/* Mach64 VT */
+#define PCI_DEVICE_ID_ATI_264VT		0x5654
+#define PCI_DEVICE_ID_ATI_264VU		0x5655
+#define PCI_DEVICE_ID_ATI_264VV		0x5656
+/* Rage128 GL */
+#define PCI_DEVICE_ID_ATI_RAGE128_RE	0x5245
+#define PCI_DEVICE_ID_ATI_RAGE128_RF	0x5246
+#define PCI_DEVICE_ID_ATI_RAGE128_RG	0x5247
+/* Rage128 VR */
+#define PCI_DEVICE_ID_ATI_RAGE128_RK	0x524b
+#define PCI_DEVICE_ID_ATI_RAGE128_RL	0x524c
+#define PCI_DEVICE_ID_ATI_RAGE128_SE	0x5345
+#define PCI_DEVICE_ID_ATI_RAGE128_SF	0x5346
+#define PCI_DEVICE_ID_ATI_RAGE128_SG	0x5347
+#define PCI_DEVICE_ID_ATI_RAGE128_SH	0x5348
+#define PCI_DEVICE_ID_ATI_RAGE128_SK	0x534b
+#define PCI_DEVICE_ID_ATI_RAGE128_SL	0x534c
+#define PCI_DEVICE_ID_ATI_RAGE128_SM	0x534d
+#define PCI_DEVICE_ID_ATI_RAGE128_SN	0x534e
+/* Rage128 Ultra */
+#define PCI_DEVICE_ID_ATI_RAGE128_TF	0x5446
+#define PCI_DEVICE_ID_ATI_RAGE128_TL	0x544c
+#define PCI_DEVICE_ID_ATI_RAGE128_TR	0x5452
+#define PCI_DEVICE_ID_ATI_RAGE128_TS	0x5453
+#define PCI_DEVICE_ID_ATI_RAGE128_TT	0x5454
+#define PCI_DEVICE_ID_ATI_RAGE128_TU	0x5455
+/* Rage128 M3 */
+#define PCI_DEVICE_ID_ATI_RAGE128_LE	0x4c45
+#define PCI_DEVICE_ID_ATI_RAGE128_LF	0x4c46
+/* Rage128 M4 */
+#define PCI_DEVICE_ID_ATI_RAGE128_MF    0x4d46
+#define PCI_DEVICE_ID_ATI_RAGE128_ML    0x4d4c
+/* Rage128 Pro GL */
+#define PCI_DEVICE_ID_ATI_RAGE128_PA	0x5041
+#define PCI_DEVICE_ID_ATI_RAGE128_PB	0x5042
+#define PCI_DEVICE_ID_ATI_RAGE128_PC	0x5043
+#define PCI_DEVICE_ID_ATI_RAGE128_PD	0x5044
+#define PCI_DEVICE_ID_ATI_RAGE128_PE	0x5045
+#define PCI_DEVICE_ID_ATI_RAGE128_PF	0x5046
+/* Rage128 Pro VR */
+#define PCI_DEVICE_ID_ATI_RAGE128_PG	0x5047
+#define PCI_DEVICE_ID_ATI_RAGE128_PH	0x5048
+#define PCI_DEVICE_ID_ATI_RAGE128_PI	0x5049
+#define PCI_DEVICE_ID_ATI_RAGE128_PJ	0x504A
+#define PCI_DEVICE_ID_ATI_RAGE128_PK	0x504B
+#define PCI_DEVICE_ID_ATI_RAGE128_PL	0x504C
+#define PCI_DEVICE_ID_ATI_RAGE128_PM	0x504D
+#define PCI_DEVICE_ID_ATI_RAGE128_PN	0x504E
+#define PCI_DEVICE_ID_ATI_RAGE128_PO	0x504F
+#define PCI_DEVICE_ID_ATI_RAGE128_PP	0x5050
+#define PCI_DEVICE_ID_ATI_RAGE128_PQ	0x5051
+#define PCI_DEVICE_ID_ATI_RAGE128_PR	0x5052
+#define PCI_DEVICE_ID_ATI_RAGE128_PS	0x5053
+#define PCI_DEVICE_ID_ATI_RAGE128_PT	0x5054
+#define PCI_DEVICE_ID_ATI_RAGE128_PU	0x5055
+#define PCI_DEVICE_ID_ATI_RAGE128_PV	0x5056
+#define PCI_DEVICE_ID_ATI_RAGE128_PW	0x5057
+#define PCI_DEVICE_ID_ATI_RAGE128_PX	0x5058
+/* Rage128 M4 */
+/* Radeon R100 */
+#define PCI_DEVICE_ID_ATI_RADEON_QD	0x5144
+#define PCI_DEVICE_ID_ATI_RADEON_QE	0x5145
+#define PCI_DEVICE_ID_ATI_RADEON_QF	0x5146
+#define PCI_DEVICE_ID_ATI_RADEON_QG	0x5147
+/* Radeon RV100 (VE) */
+#define PCI_DEVICE_ID_ATI_RADEON_QY	0x5159
+#define PCI_DEVICE_ID_ATI_RADEON_QZ	0x515a
+/* Radeon R200 (8500) */
+#define PCI_DEVICE_ID_ATI_RADEON_QL	0x514c
+#define PCI_DEVICE_ID_ATI_RADEON_QN	0x514e
+#define PCI_DEVICE_ID_ATI_RADEON_QO	0x514f
+#define PCI_DEVICE_ID_ATI_RADEON_Ql	0x516c
+#define PCI_DEVICE_ID_ATI_RADEON_BB	0x4242
+/* Radeon R200 (9100) */
+#define PCI_DEVICE_ID_ATI_RADEON_QM	0x514d
+/* Radeon RV200 (7500) */
+#define PCI_DEVICE_ID_ATI_RADEON_QW	0x5157
+#define PCI_DEVICE_ID_ATI_RADEON_QX	0x5158
+/* Radeon NV-100 */
+/* Radeon RV250 (9000) */
+#define PCI_DEVICE_ID_ATI_RADEON_Id	0x4964
+#define PCI_DEVICE_ID_ATI_RADEON_Ie	0x4965
+#define PCI_DEVICE_ID_ATI_RADEON_If	0x4966
+#define PCI_DEVICE_ID_ATI_RADEON_Ig	0x4967
+/* Radeon RV280 (9200) */
+#define PCI_DEVICE_ID_ATI_RADEON_Ya	0x5961
+#define PCI_DEVICE_ID_ATI_RADEON_Yd	0x5964
+/* Radeon R300 (9500) */
+/* Radeon R300 (9700) */
+#define PCI_DEVICE_ID_ATI_RADEON_ND	0x4e44
+#define PCI_DEVICE_ID_ATI_RADEON_NE	0x4e45
+#define PCI_DEVICE_ID_ATI_RADEON_NF	0x4e46
+#define PCI_DEVICE_ID_ATI_RADEON_NG	0x4e47
+/* Radeon R350 (9800) */
+/* Radeon RV350 (9600) */
+/* Radeon M6 */
+#define PCI_DEVICE_ID_ATI_RADEON_LY	0x4c59
+#define PCI_DEVICE_ID_ATI_RADEON_LZ	0x4c5a
+/* Radeon M7 */
+#define PCI_DEVICE_ID_ATI_RADEON_LW	0x4c57
+#define PCI_DEVICE_ID_ATI_RADEON_LX	0x4c58
+/* Radeon M9 */
+#define PCI_DEVICE_ID_ATI_RADEON_Ld	0x4c64
+#define PCI_DEVICE_ID_ATI_RADEON_Le	0x4c65
+#define PCI_DEVICE_ID_ATI_RADEON_Lf	0x4c66
+#define PCI_DEVICE_ID_ATI_RADEON_Lg	0x4c67
+/* Radeon */
+/* RadeonIGP */
+#define PCI_DEVICE_ID_ATI_RS100		0xcab0
+#define PCI_DEVICE_ID_ATI_RS200		0xcab2
+#define PCI_DEVICE_ID_ATI_RS200_B	0xcbb2
+#define PCI_DEVICE_ID_ATI_RS250		0xcab3
+#define PCI_DEVICE_ID_ATI_RS300_100	0x5830
+#define PCI_DEVICE_ID_ATI_RS300_133	0x5831
+#define PCI_DEVICE_ID_ATI_RS300_166	0x5832
+#define PCI_DEVICE_ID_ATI_RS300_200	0x5833
+#define PCI_DEVICE_ID_ATI_RS350_100     0x7830
+#define PCI_DEVICE_ID_ATI_RS350_133     0x7831
+#define PCI_DEVICE_ID_ATI_RS350_166     0x7832
+#define PCI_DEVICE_ID_ATI_RS350_200     0x7833
+#define PCI_DEVICE_ID_ATI_RS400_100     0x5a30
+#define PCI_DEVICE_ID_ATI_RS400_133     0x5a31
+#define PCI_DEVICE_ID_ATI_RS400_166     0x5a32
+#define PCI_DEVICE_ID_ATI_RS400_200     0x5a33
+#define PCI_DEVICE_ID_ATI_RS480         0x5950
+/* ATI IXP Chipset */
+#define PCI_DEVICE_ID_ATI_IXP200_IDE	0x4349
+#define PCI_DEVICE_ID_ATI_IXP200_SMBUS	0x4353
+#define PCI_DEVICE_ID_ATI_IXP300_SMBUS	0x4363
+#define PCI_DEVICE_ID_ATI_IXP300_IDE	0x4369
+#define PCI_DEVICE_ID_ATI_IXP300_SATA   0x436e
+#define PCI_DEVICE_ID_ATI_IXP400_SMBUS	0x4372
+#define PCI_DEVICE_ID_ATI_IXP400_IDE	0x4376
+#define PCI_DEVICE_ID_ATI_IXP400_SATA   0x4379
+#define PCI_DEVICE_ID_ATI_IXP400_SATA2	0x437a
+#define PCI_DEVICE_ID_ATI_IXP600_SATA	0x4380
+#define PCI_DEVICE_ID_ATI_SBX00_SMBUS	0x4385
+#define PCI_DEVICE_ID_ATI_IXP600_IDE	0x438c
+#define PCI_DEVICE_ID_ATI_IXP700_SATA	0x4390
+#define PCI_DEVICE_ID_ATI_IXP700_IDE	0x439c
+
+#define PCI_VENDOR_ID_VLSI		0x1004
+#define PCI_DEVICE_ID_VLSI_82C592	0x0005
+#define PCI_DEVICE_ID_VLSI_82C593	0x0006
+#define PCI_DEVICE_ID_VLSI_82C594	0x0007
+#define PCI_DEVICE_ID_VLSI_82C597	0x0009
+#define PCI_DEVICE_ID_VLSI_82C541	0x000c
+#define PCI_DEVICE_ID_VLSI_82C543	0x000d
+#define PCI_DEVICE_ID_VLSI_82C532	0x0101
+#define PCI_DEVICE_ID_VLSI_82C534	0x0102
+#define PCI_DEVICE_ID_VLSI_82C535	0x0104
+#define PCI_DEVICE_ID_VLSI_82C147	0x0105
+#define PCI_DEVICE_ID_VLSI_VAS96011	0x0702
+
+/* AMD RD890 Chipset */
+#define PCI_DEVICE_ID_RD890_IOMMU	0x5a23
+
+#define PCI_VENDOR_ID_ADL		0x1005
+#define PCI_DEVICE_ID_ADL_2301		0x2301
+
+#define PCI_VENDOR_ID_NS		0x100b
+#define PCI_DEVICE_ID_NS_87415		0x0002
+#define PCI_DEVICE_ID_NS_87560_LIO	0x000e
+#define PCI_DEVICE_ID_NS_87560_USB	0x0012
+#define PCI_DEVICE_ID_NS_83815		0x0020
+#define PCI_DEVICE_ID_NS_83820		0x0022
+#define PCI_DEVICE_ID_NS_CS5535_ISA	0x002b
+#define PCI_DEVICE_ID_NS_CS5535_IDE	0x002d
+#define PCI_DEVICE_ID_NS_CS5535_AUDIO	0x002e
+#define PCI_DEVICE_ID_NS_CS5535_USB	0x002f
+#define PCI_DEVICE_ID_NS_GX_VIDEO	0x0030
+#define PCI_DEVICE_ID_NS_SATURN		0x0035
+#define PCI_DEVICE_ID_NS_SCx200_BRIDGE	0x0500
+#define PCI_DEVICE_ID_NS_SCx200_SMI	0x0501
+#define PCI_DEVICE_ID_NS_SCx200_IDE	0x0502
+#define PCI_DEVICE_ID_NS_SCx200_AUDIO	0x0503
+#define PCI_DEVICE_ID_NS_SCx200_VIDEO	0x0504
+#define PCI_DEVICE_ID_NS_SCx200_XBUS	0x0505
+#define PCI_DEVICE_ID_NS_SC1100_BRIDGE	0x0510
+#define PCI_DEVICE_ID_NS_SC1100_SMI	0x0511
+#define PCI_DEVICE_ID_NS_SC1100_XBUS	0x0515
+#define PCI_DEVICE_ID_NS_87410		0xd001
+
+#define PCI_DEVICE_ID_NS_GX_HOST_BRIDGE  0x0028
+
+#define PCI_VENDOR_ID_TSENG		0x100c
+#define PCI_DEVICE_ID_TSENG_W32P_2	0x3202
+#define PCI_DEVICE_ID_TSENG_W32P_b	0x3205
+#define PCI_DEVICE_ID_TSENG_W32P_c	0x3206
+#define PCI_DEVICE_ID_TSENG_W32P_d	0x3207
+#define PCI_DEVICE_ID_TSENG_ET6000	0x3208
+
+#define PCI_VENDOR_ID_WEITEK		0x100e
+#define PCI_DEVICE_ID_WEITEK_P9000	0x9001
+#define PCI_DEVICE_ID_WEITEK_P9100	0x9100
+
+#define PCI_VENDOR_ID_DEC		0x1011
+#define PCI_DEVICE_ID_DEC_BRD		0x0001
+#define PCI_DEVICE_ID_DEC_TULIP		0x0002
+#define PCI_DEVICE_ID_DEC_TGA		0x0004
+#define PCI_DEVICE_ID_DEC_TULIP_FAST	0x0009
+#define PCI_DEVICE_ID_DEC_TGA2		0x000D
+#define PCI_DEVICE_ID_DEC_FDDI		0x000F
+#define PCI_DEVICE_ID_DEC_TULIP_PLUS	0x0014
+#define PCI_DEVICE_ID_DEC_21142		0x0019
+#define PCI_DEVICE_ID_DEC_21052		0x0021
+#define PCI_DEVICE_ID_DEC_21150		0x0022
+#define PCI_DEVICE_ID_DEC_21152		0x0024
+#define PCI_DEVICE_ID_DEC_21153		0x0025
+#define PCI_DEVICE_ID_DEC_21154		0x0026
+#define PCI_DEVICE_ID_DEC_21285		0x1065
+#define PCI_DEVICE_ID_COMPAQ_42XX	0x0046
+
+#define PCI_VENDOR_ID_CIRRUS		0x1013
+#define PCI_DEVICE_ID_CIRRUS_7548	0x0038
+#define PCI_DEVICE_ID_CIRRUS_5430	0x00a0
+#define PCI_DEVICE_ID_CIRRUS_5434_4	0x00a4
+#define PCI_DEVICE_ID_CIRRUS_5434_8	0x00a8
+#define PCI_DEVICE_ID_CIRRUS_5436	0x00ac
+#define PCI_DEVICE_ID_CIRRUS_5446	0x00b8
+#define PCI_DEVICE_ID_CIRRUS_5480	0x00bc
+#define PCI_DEVICE_ID_CIRRUS_5462	0x00d0
+#define PCI_DEVICE_ID_CIRRUS_5464	0x00d4
+#define PCI_DEVICE_ID_CIRRUS_5465	0x00d6
+#define PCI_DEVICE_ID_CIRRUS_6729	0x1100
+#define PCI_DEVICE_ID_CIRRUS_6832	0x1110
+#define PCI_DEVICE_ID_CIRRUS_7543	0x1202
+#define PCI_DEVICE_ID_CIRRUS_4610	0x6001
+#define PCI_DEVICE_ID_CIRRUS_4612	0x6003
+#define PCI_DEVICE_ID_CIRRUS_4615	0x6004
+
+#define PCI_VENDOR_ID_IBM		0x1014
+#define PCI_DEVICE_ID_IBM_TR		0x0018
+#define PCI_DEVICE_ID_IBM_TR_WAKE	0x003e
+#define PCI_DEVICE_ID_IBM_CPC710_PCI64	0x00fc
+#define PCI_DEVICE_ID_IBM_SNIPE		0x0180
+#define PCI_DEVICE_ID_IBM_CITRINE		0x028C
+#define PCI_DEVICE_ID_IBM_GEMSTONE		0xB166
+#define PCI_DEVICE_ID_IBM_OBSIDIAN		0x02BD
+#define PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1	0x0031
+#define PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2	0x0219
+#define PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX		0x021A
+#define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM	0x0251
+#define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM_PCIE 0x0361
+#define PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL	0x252
+
+#define PCI_SUBVENDOR_ID_IBM		0x1014
+#define PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT	0x03d4
+
+#define PCI_VENDOR_ID_UNISYS		0x1018
+#define PCI_DEVICE_ID_UNISYS_DMA_DIRECTOR 0x001C
+
+#define PCI_VENDOR_ID_COMPEX2		0x101a /* pci.ids says "AT&T GIS (NCR)" */
+#define PCI_DEVICE_ID_COMPEX2_100VG	0x0005
+
+#define PCI_VENDOR_ID_WD		0x101c
+#define PCI_DEVICE_ID_WD_90C		0xc24a
+
+#define PCI_VENDOR_ID_AMI		0x101e
+#define PCI_DEVICE_ID_AMI_MEGARAID3	0x1960
+#define PCI_DEVICE_ID_AMI_MEGARAID	0x9010
+#define PCI_DEVICE_ID_AMI_MEGARAID2	0x9060
+
+#define PCI_VENDOR_ID_AMD		0x1022
+#define PCI_DEVICE_ID_AMD_K8_NB		0x1100
+#define PCI_DEVICE_ID_AMD_K8_NB_ADDRMAP	0x1101
+#define PCI_DEVICE_ID_AMD_K8_NB_MEMCTL	0x1102
+#define PCI_DEVICE_ID_AMD_K8_NB_MISC	0x1103
+#define PCI_DEVICE_ID_AMD_10H_NB_HT	0x1200
+#define PCI_DEVICE_ID_AMD_10H_NB_MAP	0x1201
+#define PCI_DEVICE_ID_AMD_10H_NB_DRAM	0x1202
+#define PCI_DEVICE_ID_AMD_10H_NB_MISC	0x1203
+#define PCI_DEVICE_ID_AMD_10H_NB_LINK	0x1204
+#define PCI_DEVICE_ID_AMD_11H_NB_HT	0x1300
+#define PCI_DEVICE_ID_AMD_11H_NB_MAP	0x1301
+#define PCI_DEVICE_ID_AMD_11H_NB_DRAM	0x1302
+#define PCI_DEVICE_ID_AMD_11H_NB_MISC	0x1303
+#define PCI_DEVICE_ID_AMD_11H_NB_LINK	0x1304
+#define PCI_DEVICE_ID_AMD_15H_NB_F0	0x1600
+#define PCI_DEVICE_ID_AMD_15H_NB_F1	0x1601
+#define PCI_DEVICE_ID_AMD_15H_NB_F2	0x1602
+#define PCI_DEVICE_ID_AMD_15H_NB_F3	0x1603
+#define PCI_DEVICE_ID_AMD_15H_NB_F4	0x1604
+#define PCI_DEVICE_ID_AMD_15H_NB_F5	0x1605
+#define PCI_DEVICE_ID_AMD_CNB17H_F3	0x1703
+#define PCI_DEVICE_ID_AMD_LANCE		0x2000
+#define PCI_DEVICE_ID_AMD_LANCE_HOME	0x2001
+#define PCI_DEVICE_ID_AMD_SCSI		0x2020
+#define PCI_DEVICE_ID_AMD_SERENADE	0x36c0
+#define PCI_DEVICE_ID_AMD_FE_GATE_7006	0x7006
+#define PCI_DEVICE_ID_AMD_FE_GATE_7007	0x7007
+#define PCI_DEVICE_ID_AMD_FE_GATE_700C	0x700C
+#define PCI_DEVICE_ID_AMD_FE_GATE_700E	0x700E
+#define PCI_DEVICE_ID_AMD_COBRA_7401	0x7401
+#define PCI_DEVICE_ID_AMD_VIPER_7409	0x7409
+#define PCI_DEVICE_ID_AMD_VIPER_740B	0x740B
+#define PCI_DEVICE_ID_AMD_VIPER_7410	0x7410
+#define PCI_DEVICE_ID_AMD_VIPER_7411	0x7411
+#define PCI_DEVICE_ID_AMD_VIPER_7413	0x7413
+#define PCI_DEVICE_ID_AMD_VIPER_7440	0x7440
+#define PCI_DEVICE_ID_AMD_OPUS_7441	0x7441
+#define PCI_DEVICE_ID_AMD_OPUS_7443	0x7443
+#define PCI_DEVICE_ID_AMD_VIPER_7443	0x7443
+#define PCI_DEVICE_ID_AMD_OPUS_7445	0x7445
+#define PCI_DEVICE_ID_AMD_8111_PCI	0x7460
+#define PCI_DEVICE_ID_AMD_8111_LPC	0x7468
+#define PCI_DEVICE_ID_AMD_8111_IDE	0x7469
+#define PCI_DEVICE_ID_AMD_8111_SMBUS2	0x746a
+#define PCI_DEVICE_ID_AMD_8111_SMBUS	0x746b
+#define PCI_DEVICE_ID_AMD_8111_AUDIO	0x746d
+#define PCI_DEVICE_ID_AMD_8151_0	0x7454
+#define PCI_DEVICE_ID_AMD_8131_BRIDGE	0x7450
+#define PCI_DEVICE_ID_AMD_8131_APIC	0x7451
+#define PCI_DEVICE_ID_AMD_8132_BRIDGE	0x7458
+#define PCI_DEVICE_ID_AMD_HUDSON2_SMBUS	0x780b
+#define PCI_DEVICE_ID_AMD_CS5535_IDE    0x208F
+#define PCI_DEVICE_ID_AMD_CS5536_ISA    0x2090
+#define PCI_DEVICE_ID_AMD_CS5536_FLASH  0x2091
+#define PCI_DEVICE_ID_AMD_CS5536_AUDIO  0x2093
+#define PCI_DEVICE_ID_AMD_CS5536_OHC    0x2094
+#define PCI_DEVICE_ID_AMD_CS5536_EHC    0x2095
+#define PCI_DEVICE_ID_AMD_CS5536_UDC    0x2096
+#define PCI_DEVICE_ID_AMD_CS5536_UOC    0x2097
+#define PCI_DEVICE_ID_AMD_CS5536_IDE    0x209A
+#define PCI_DEVICE_ID_AMD_LX_VIDEO  0x2081
+#define PCI_DEVICE_ID_AMD_LX_AES    0x2082
+#define PCI_DEVICE_ID_AMD_HUDSON2_IDE		0x780c
+#define PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE	0x7800
+
+#define PCI_VENDOR_ID_TRIDENT		0x1023
+#define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX	0x2000
+#define PCI_DEVICE_ID_TRIDENT_4DWAVE_NX	0x2001
+#define PCI_DEVICE_ID_TRIDENT_9320	0x9320
+#define PCI_DEVICE_ID_TRIDENT_9388	0x9388
+#define PCI_DEVICE_ID_TRIDENT_9397	0x9397
+#define PCI_DEVICE_ID_TRIDENT_939A	0x939A
+#define PCI_DEVICE_ID_TRIDENT_9520	0x9520
+#define PCI_DEVICE_ID_TRIDENT_9525	0x9525
+#define PCI_DEVICE_ID_TRIDENT_9420	0x9420
+#define PCI_DEVICE_ID_TRIDENT_9440	0x9440
+#define PCI_DEVICE_ID_TRIDENT_9660	0x9660
+#define PCI_DEVICE_ID_TRIDENT_9750	0x9750
+#define PCI_DEVICE_ID_TRIDENT_9850	0x9850
+#define PCI_DEVICE_ID_TRIDENT_9880	0x9880
+#define PCI_DEVICE_ID_TRIDENT_8400	0x8400
+#define PCI_DEVICE_ID_TRIDENT_8420	0x8420
+#define PCI_DEVICE_ID_TRIDENT_8500	0x8500
+
+#define PCI_VENDOR_ID_AI		0x1025
+#define PCI_DEVICE_ID_AI_M1435		0x1435
+
+#define PCI_VENDOR_ID_DELL		0x1028
+#define PCI_DEVICE_ID_DELL_RACIII	0x0008
+#define PCI_DEVICE_ID_DELL_RAC4		0x0012
+#define PCI_DEVICE_ID_DELL_PERC5	0x0015
+
+#define PCI_VENDOR_ID_MATROX		0x102B
+#define PCI_DEVICE_ID_MATROX_MGA_2	0x0518
+#define PCI_DEVICE_ID_MATROX_MIL	0x0519
+#define PCI_DEVICE_ID_MATROX_MYS	0x051A
+#define PCI_DEVICE_ID_MATROX_MIL_2	0x051b
+#define PCI_DEVICE_ID_MATROX_MYS_AGP	0x051e
+#define PCI_DEVICE_ID_MATROX_MIL_2_AGP	0x051f
+#define PCI_DEVICE_ID_MATROX_MGA_IMP	0x0d10
+#define PCI_DEVICE_ID_MATROX_G100_MM	0x1000
+#define PCI_DEVICE_ID_MATROX_G100_AGP	0x1001
+#define PCI_DEVICE_ID_MATROX_G200_PCI	0x0520
+#define PCI_DEVICE_ID_MATROX_G200_AGP	0x0521
+#define	PCI_DEVICE_ID_MATROX_G400	0x0525
+#define	PCI_DEVICE_ID_MATROX_G200EV_PCI	0x0530
+#define PCI_DEVICE_ID_MATROX_G550	0x2527
+#define PCI_DEVICE_ID_MATROX_VIA	0x4536
+
+#define PCI_VENDOR_ID_MOBILITY_ELECTRONICS	0x14f2
+
+#define PCI_VENDOR_ID_CT		0x102c
+#define PCI_DEVICE_ID_CT_69000		0x00c0
+#define PCI_DEVICE_ID_CT_65545		0x00d8
+#define PCI_DEVICE_ID_CT_65548		0x00dc
+#define PCI_DEVICE_ID_CT_65550		0x00e0
+#define PCI_DEVICE_ID_CT_65554		0x00e4
+#define PCI_DEVICE_ID_CT_65555		0x00e5
+
+#define PCI_VENDOR_ID_MIRO		0x1031
+#define PCI_DEVICE_ID_MIRO_36050	0x5601
+#define PCI_DEVICE_ID_MIRO_DC10PLUS	0x7efe
+#define PCI_DEVICE_ID_MIRO_DC30PLUS	0xd801
+
+#define PCI_VENDOR_ID_NEC		0x1033
+#define PCI_DEVICE_ID_NEC_CBUS_1	0x0001 /* PCI-Cbus Bridge */
+#define PCI_DEVICE_ID_NEC_LOCAL		0x0002 /* Local Bridge */
+#define PCI_DEVICE_ID_NEC_ATM		0x0003 /* ATM LAN Controller */
+#define PCI_DEVICE_ID_NEC_R4000		0x0004 /* R4000 Bridge */
+#define PCI_DEVICE_ID_NEC_486		0x0005 /* 486 Like Peripheral Bus Bridge */
+#define PCI_DEVICE_ID_NEC_ACCEL_1	0x0006 /* Graphic Accelerator */
+#define PCI_DEVICE_ID_NEC_UXBUS		0x0007 /* UX-Bus Bridge */
+#define PCI_DEVICE_ID_NEC_ACCEL_2	0x0008 /* Graphic Accelerator */
+#define PCI_DEVICE_ID_NEC_GRAPH		0x0009 /* PCI-CoreGraph Bridge */
+#define PCI_DEVICE_ID_NEC_VL		0x0016 /* PCI-VL Bridge */
+#define PCI_DEVICE_ID_NEC_STARALPHA2	0x002c /* STAR ALPHA2 */
+#define PCI_DEVICE_ID_NEC_CBUS_2	0x002d /* PCI-Cbus Bridge */
+#define PCI_DEVICE_ID_NEC_USB		0x0035 /* PCI-USB Host */
+#define PCI_DEVICE_ID_NEC_CBUS_3	0x003b
+#define PCI_DEVICE_ID_NEC_NAPCCARD	0x003e
+#define PCI_DEVICE_ID_NEC_PCX2		0x0046 /* PowerVR */
+#define PCI_DEVICE_ID_NEC_VRC5476       0x009b
+#define PCI_DEVICE_ID_NEC_VRC4173	0x00a5
+#define PCI_DEVICE_ID_NEC_VRC5477_AC97  0x00a6
+#define PCI_DEVICE_ID_NEC_PC9821CS01    0x800c /* PC-9821-CS01 */
+#define PCI_DEVICE_ID_NEC_PC9821NRB06   0x800d /* PC-9821NR-B06 */
+
+#define PCI_VENDOR_ID_FD		0x1036
+#define PCI_DEVICE_ID_FD_36C70		0x0000
+
+#define PCI_VENDOR_ID_SI		0x1039
+#define PCI_DEVICE_ID_SI_5591_AGP	0x0001
+#define PCI_DEVICE_ID_SI_6202		0x0002
+#define PCI_DEVICE_ID_SI_503		0x0008
+#define PCI_DEVICE_ID_SI_ACPI		0x0009
+#define PCI_DEVICE_ID_SI_SMBUS		0x0016
+#define PCI_DEVICE_ID_SI_LPC		0x0018
+#define PCI_DEVICE_ID_SI_5597_VGA	0x0200
+#define PCI_DEVICE_ID_SI_6205		0x0205
+#define PCI_DEVICE_ID_SI_501		0x0406
+#define PCI_DEVICE_ID_SI_496		0x0496
+#define PCI_DEVICE_ID_SI_300		0x0300
+#define PCI_DEVICE_ID_SI_315H		0x0310
+#define PCI_DEVICE_ID_SI_315		0x0315
+#define PCI_DEVICE_ID_SI_315PRO		0x0325
+#define PCI_DEVICE_ID_SI_530		0x0530
+#define PCI_DEVICE_ID_SI_540		0x0540
+#define PCI_DEVICE_ID_SI_550		0x0550
+#define PCI_DEVICE_ID_SI_540_VGA	0x5300
+#define PCI_DEVICE_ID_SI_550_VGA	0x5315
+#define PCI_DEVICE_ID_SI_620		0x0620
+#define PCI_DEVICE_ID_SI_630		0x0630
+#define PCI_DEVICE_ID_SI_633		0x0633
+#define PCI_DEVICE_ID_SI_635		0x0635
+#define PCI_DEVICE_ID_SI_640		0x0640
+#define PCI_DEVICE_ID_SI_645		0x0645
+#define PCI_DEVICE_ID_SI_646		0x0646
+#define PCI_DEVICE_ID_SI_648		0x0648
+#define PCI_DEVICE_ID_SI_650		0x0650
+#define PCI_DEVICE_ID_SI_651		0x0651
+#define PCI_DEVICE_ID_SI_655		0x0655
+#define PCI_DEVICE_ID_SI_661		0x0661
+#define PCI_DEVICE_ID_SI_730		0x0730
+#define PCI_DEVICE_ID_SI_733		0x0733
+#define PCI_DEVICE_ID_SI_630_VGA	0x6300
+#define PCI_DEVICE_ID_SI_735		0x0735
+#define PCI_DEVICE_ID_SI_740		0x0740
+#define PCI_DEVICE_ID_SI_741		0x0741
+#define PCI_DEVICE_ID_SI_745		0x0745
+#define PCI_DEVICE_ID_SI_746		0x0746
+#define PCI_DEVICE_ID_SI_755		0x0755
+#define PCI_DEVICE_ID_SI_760		0x0760
+#define PCI_DEVICE_ID_SI_900		0x0900
+#define PCI_DEVICE_ID_SI_961		0x0961
+#define PCI_DEVICE_ID_SI_962		0x0962
+#define PCI_DEVICE_ID_SI_963		0x0963
+#define PCI_DEVICE_ID_SI_965		0x0965
+#define PCI_DEVICE_ID_SI_966		0x0966
+#define PCI_DEVICE_ID_SI_968		0x0968
+#define PCI_DEVICE_ID_SI_1180		0x1180
+#define PCI_DEVICE_ID_SI_5511		0x5511
+#define PCI_DEVICE_ID_SI_5513		0x5513
+#define PCI_DEVICE_ID_SI_5517		0x5517
+#define PCI_DEVICE_ID_SI_5518		0x5518
+#define PCI_DEVICE_ID_SI_5571		0x5571
+#define PCI_DEVICE_ID_SI_5581		0x5581
+#define PCI_DEVICE_ID_SI_5582		0x5582
+#define PCI_DEVICE_ID_SI_5591		0x5591
+#define PCI_DEVICE_ID_SI_5596		0x5596
+#define PCI_DEVICE_ID_SI_5597		0x5597
+#define PCI_DEVICE_ID_SI_5598		0x5598
+#define PCI_DEVICE_ID_SI_5600		0x5600
+#define PCI_DEVICE_ID_SI_7012		0x7012
+#define PCI_DEVICE_ID_SI_7013		0x7013
+#define PCI_DEVICE_ID_SI_7016		0x7016
+#define PCI_DEVICE_ID_SI_7018		0x7018
+
+#define PCI_VENDOR_ID_HP		0x103c
+#define PCI_DEVICE_ID_HP_VISUALIZE_EG	0x1005
+#define PCI_DEVICE_ID_HP_VISUALIZE_FX6	0x1006
+#define PCI_DEVICE_ID_HP_VISUALIZE_FX4	0x1008
+#define PCI_DEVICE_ID_HP_VISUALIZE_FX2	0x100a
+#define PCI_DEVICE_ID_HP_TACHYON	0x1028
+#define PCI_DEVICE_ID_HP_TACHLITE	0x1029
+#define PCI_DEVICE_ID_HP_J2585A		0x1030
+#define PCI_DEVICE_ID_HP_J2585B		0x1031
+#define PCI_DEVICE_ID_HP_J2973A		0x1040
+#define PCI_DEVICE_ID_HP_J2970A		0x1042
+#define PCI_DEVICE_ID_HP_DIVA		0x1048
+#define PCI_DEVICE_ID_HP_DIVA_TOSCA1	0x1049
+#define PCI_DEVICE_ID_HP_DIVA_TOSCA2	0x104A
+#define PCI_DEVICE_ID_HP_DIVA_MAESTRO	0x104B
+#define PCI_DEVICE_ID_HP_REO_IOC	0x10f1
+#define PCI_DEVICE_ID_HP_VISUALIZE_FXE	0x108b
+#define PCI_DEVICE_ID_HP_DIVA_HALFDOME	0x1223
+#define PCI_DEVICE_ID_HP_DIVA_KEYSTONE	0x1226
+#define PCI_DEVICE_ID_HP_DIVA_POWERBAR	0x1227
+#define PCI_DEVICE_ID_HP_ZX1_IOC	0x122a
+#define PCI_DEVICE_ID_HP_PCIX_LBA	0x122e
+#define PCI_DEVICE_ID_HP_SX1000_IOC	0x127c
+#define PCI_DEVICE_ID_HP_DIVA_EVEREST	0x1282
+#define PCI_DEVICE_ID_HP_DIVA_AUX	0x1290
+#define PCI_DEVICE_ID_HP_DIVA_RMP3	0x1301
+#define PCI_DEVICE_ID_HP_DIVA_HURRICANE	0x132a
+#define PCI_DEVICE_ID_HP_CISSA		0x3220
+#define PCI_DEVICE_ID_HP_CISSC		0x3230
+#define PCI_DEVICE_ID_HP_CISSD		0x3238
+#define PCI_DEVICE_ID_HP_CISSE		0x323a
+#define PCI_DEVICE_ID_HP_CISSF		0x323b
+#define PCI_DEVICE_ID_HP_ZX2_IOC	0x4031
+
+#define PCI_VENDOR_ID_PCTECH		0x1042
+#define PCI_DEVICE_ID_PCTECH_RZ1000	0x1000
+#define PCI_DEVICE_ID_PCTECH_RZ1001	0x1001
+#define PCI_DEVICE_ID_PCTECH_SAMURAI_IDE 0x3020
+
+#define PCI_VENDOR_ID_ASUSTEK		0x1043
+#define PCI_DEVICE_ID_ASUSTEK_0675	0x0675
+
+#define PCI_VENDOR_ID_DPT		0x1044
+#define PCI_DEVICE_ID_DPT		0xa400
+
+#define PCI_VENDOR_ID_OPTI		0x1045
+#define PCI_DEVICE_ID_OPTI_82C558	0xc558
+#define PCI_DEVICE_ID_OPTI_82C621	0xc621
+#define PCI_DEVICE_ID_OPTI_82C700	0xc700
+#define PCI_DEVICE_ID_OPTI_82C825	0xd568
+
+#define PCI_VENDOR_ID_ELSA		0x1048
+#define PCI_DEVICE_ID_ELSA_MICROLINK	0x1000
+#define PCI_DEVICE_ID_ELSA_QS3000	0x3000
+
+#define PCI_VENDOR_ID_STMICRO		0x104A
+#define PCI_DEVICE_ID_STMICRO_USB_HOST	0xCC00
+#define PCI_DEVICE_ID_STMICRO_USB_OHCI	0xCC01
+#define PCI_DEVICE_ID_STMICRO_USB_OTG	0xCC02
+#define PCI_DEVICE_ID_STMICRO_UART_HWFC 0xCC03
+#define PCI_DEVICE_ID_STMICRO_UART_NO_HWFC	0xCC04
+#define PCI_DEVICE_ID_STMICRO_SOC_DMA	0xCC05
+#define PCI_DEVICE_ID_STMICRO_SATA	0xCC06
+#define PCI_DEVICE_ID_STMICRO_I2C	0xCC07
+#define PCI_DEVICE_ID_STMICRO_SPI_HS	0xCC08
+#define PCI_DEVICE_ID_STMICRO_MAC	0xCC09
+#define PCI_DEVICE_ID_STMICRO_SDIO_EMMC 0xCC0A
+#define PCI_DEVICE_ID_STMICRO_SDIO	0xCC0B
+#define PCI_DEVICE_ID_STMICRO_GPIO	0xCC0C
+#define PCI_DEVICE_ID_STMICRO_VIP	0xCC0D
+#define PCI_DEVICE_ID_STMICRO_AUDIO_ROUTER_DMA	0xCC0E
+#define PCI_DEVICE_ID_STMICRO_AUDIO_ROUTER_SRCS 0xCC0F
+#define PCI_DEVICE_ID_STMICRO_AUDIO_ROUTER_MSPS 0xCC10
+#define PCI_DEVICE_ID_STMICRO_CAN	0xCC11
+#define PCI_DEVICE_ID_STMICRO_MLB	0xCC12
+#define PCI_DEVICE_ID_STMICRO_DBP	0xCC13
+#define PCI_DEVICE_ID_STMICRO_SATA_PHY	0xCC14
+#define PCI_DEVICE_ID_STMICRO_ESRAM	0xCC15
+#define PCI_DEVICE_ID_STMICRO_VIC	0xCC16
+
+#define PCI_VENDOR_ID_BUSLOGIC		      0x104B
+#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC 0x0140
+#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER    0x1040
+#define PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT     0x8130
+
+#define PCI_VENDOR_ID_TI		0x104c
+#define PCI_DEVICE_ID_TI_TVP4020	0x3d07
+#define PCI_DEVICE_ID_TI_4450		0x8011
+#define PCI_DEVICE_ID_TI_XX21_XX11	0x8031
+#define PCI_DEVICE_ID_TI_XX21_XX11_FM	0x8033
+#define PCI_DEVICE_ID_TI_XX21_XX11_SD	0x8034
+#define PCI_DEVICE_ID_TI_X515		0x8036
+#define PCI_DEVICE_ID_TI_XX12		0x8039
+#define PCI_DEVICE_ID_TI_XX12_FM	0x803b
+#define PCI_DEVICE_ID_TI_XIO2000A	0x8231
+#define PCI_DEVICE_ID_TI_1130		0xac12
+#define PCI_DEVICE_ID_TI_1031		0xac13
+#define PCI_DEVICE_ID_TI_1131		0xac15
+#define PCI_DEVICE_ID_TI_1250		0xac16
+#define PCI_DEVICE_ID_TI_1220		0xac17
+#define PCI_DEVICE_ID_TI_1221		0xac19
+#define PCI_DEVICE_ID_TI_1210		0xac1a
+#define PCI_DEVICE_ID_TI_1450		0xac1b
+#define PCI_DEVICE_ID_TI_1225		0xac1c
+#define PCI_DEVICE_ID_TI_1251A		0xac1d
+#define PCI_DEVICE_ID_TI_1211		0xac1e
+#define PCI_DEVICE_ID_TI_1251B		0xac1f
+#define PCI_DEVICE_ID_TI_4410		0xac41
+#define PCI_DEVICE_ID_TI_4451		0xac42
+#define PCI_DEVICE_ID_TI_4510		0xac44
+#define PCI_DEVICE_ID_TI_4520		0xac46
+#define PCI_DEVICE_ID_TI_7510		0xac47
+#define PCI_DEVICE_ID_TI_7610		0xac48
+#define PCI_DEVICE_ID_TI_7410		0xac49
+#define PCI_DEVICE_ID_TI_1410		0xac50
+#define PCI_DEVICE_ID_TI_1420		0xac51
+#define PCI_DEVICE_ID_TI_1451A		0xac52
+#define PCI_DEVICE_ID_TI_1620		0xac54
+#define PCI_DEVICE_ID_TI_1520		0xac55
+#define PCI_DEVICE_ID_TI_1510		0xac56
+#define PCI_DEVICE_ID_TI_X620		0xac8d
+#define PCI_DEVICE_ID_TI_X420		0xac8e
+#define PCI_DEVICE_ID_TI_XX20_FM	0xac8f
+
+#define PCI_VENDOR_ID_SONY		0x104d
+
+/* Winbond have two vendor IDs! See 0x10ad as well */
+#define PCI_VENDOR_ID_WINBOND2		0x1050
+#define PCI_DEVICE_ID_WINBOND2_89C940F	0x5a5a
+#define PCI_DEVICE_ID_WINBOND2_6692	0x6692
+
+#define PCI_VENDOR_ID_ANIGMA		0x1051
+#define PCI_DEVICE_ID_ANIGMA_MC145575	0x0100
+
+#define PCI_VENDOR_ID_EFAR		0x1055
+#define PCI_DEVICE_ID_EFAR_SLC90E66_1	0x9130
+#define PCI_DEVICE_ID_EFAR_SLC90E66_3	0x9463
+
+#define PCI_VENDOR_ID_MOTOROLA		0x1057
+#define PCI_DEVICE_ID_MOTOROLA_MPC105	0x0001
+#define PCI_DEVICE_ID_MOTOROLA_MPC106	0x0002
+#define PCI_DEVICE_ID_MOTOROLA_MPC107	0x0004
+#define PCI_DEVICE_ID_MOTOROLA_RAVEN	0x4801
+#define PCI_DEVICE_ID_MOTOROLA_FALCON	0x4802
+#define PCI_DEVICE_ID_MOTOROLA_HAWK	0x4803
+#define PCI_DEVICE_ID_MOTOROLA_HARRIER	0x480b
+#define PCI_DEVICE_ID_MOTOROLA_MPC5200	0x5803
+#define PCI_DEVICE_ID_MOTOROLA_MPC5200B	0x5809
+
+#define PCI_VENDOR_ID_PROMISE		0x105a
+#define PCI_DEVICE_ID_PROMISE_20265	0x0d30
+#define PCI_DEVICE_ID_PROMISE_20267	0x4d30
+#define PCI_DEVICE_ID_PROMISE_20246	0x4d33
+#define PCI_DEVICE_ID_PROMISE_20262	0x4d38
+#define PCI_DEVICE_ID_PROMISE_20263	0x0D38
+#define PCI_DEVICE_ID_PROMISE_20268	0x4d68
+#define PCI_DEVICE_ID_PROMISE_20269	0x4d69
+#define PCI_DEVICE_ID_PROMISE_20270	0x6268
+#define PCI_DEVICE_ID_PROMISE_20271	0x6269
+#define PCI_DEVICE_ID_PROMISE_20275	0x1275
+#define PCI_DEVICE_ID_PROMISE_20276	0x5275
+#define PCI_DEVICE_ID_PROMISE_20277	0x7275
+
+#define PCI_VENDOR_ID_FOXCONN		0x105b
+
+#define PCI_VENDOR_ID_UMC		0x1060
+#define PCI_DEVICE_ID_UMC_UM8673F	0x0101
+#define PCI_DEVICE_ID_UMC_UM8886BF	0x673a
+#define PCI_DEVICE_ID_UMC_UM8886A	0x886a
+
+#define PCI_VENDOR_ID_PICOPOWER		0x1066
+#define PCI_DEVICE_ID_PICOPOWER_PT86C523	0x0002
+#define PCI_DEVICE_ID_PICOPOWER_PT86C523BBP	0x8002
+
+#define PCI_VENDOR_ID_MYLEX		0x1069
+#define PCI_DEVICE_ID_MYLEX_DAC960_P	0x0001
+#define PCI_DEVICE_ID_MYLEX_DAC960_PD	0x0002
+#define PCI_DEVICE_ID_MYLEX_DAC960_PG	0x0010
+#define PCI_DEVICE_ID_MYLEX_DAC960_LA	0x0020
+#define PCI_DEVICE_ID_MYLEX_DAC960_LP	0x0050
+#define PCI_DEVICE_ID_MYLEX_DAC960_BA	0xBA56
+#define PCI_DEVICE_ID_MYLEX_DAC960_GEM	0xB166
+
+#define PCI_VENDOR_ID_APPLE		0x106b
+#define PCI_DEVICE_ID_APPLE_BANDIT	0x0001
+#define PCI_DEVICE_ID_APPLE_HYDRA	0x000e
+#define PCI_DEVICE_ID_APPLE_UNI_N_FW	0x0018
+#define PCI_DEVICE_ID_APPLE_UNI_N_AGP	0x0020
+#define PCI_DEVICE_ID_APPLE_UNI_N_GMAC	0x0021
+#define PCI_DEVICE_ID_APPLE_UNI_N_GMACP	0x0024
+#define PCI_DEVICE_ID_APPLE_UNI_N_AGP_P	0x0027
+#define PCI_DEVICE_ID_APPLE_UNI_N_AGP15	0x002d
+#define PCI_DEVICE_ID_APPLE_UNI_N_PCI15	0x002e
+#define PCI_DEVICE_ID_APPLE_UNI_N_GMAC2	0x0032
+#define PCI_DEVICE_ID_APPLE_UNI_N_ATA	0x0033
+#define PCI_DEVICE_ID_APPLE_UNI_N_AGP2	0x0034
+#define PCI_DEVICE_ID_APPLE_IPID_ATA100	0x003b
+#define PCI_DEVICE_ID_APPLE_K2_ATA100	0x0043
+#define PCI_DEVICE_ID_APPLE_U3_AGP	0x004b
+#define PCI_DEVICE_ID_APPLE_K2_GMAC	0x004c
+#define PCI_DEVICE_ID_APPLE_SH_ATA      0x0050
+#define PCI_DEVICE_ID_APPLE_SH_SUNGEM   0x0051
+#define PCI_DEVICE_ID_APPLE_U3L_AGP	0x0058
+#define PCI_DEVICE_ID_APPLE_U3H_AGP	0x0059
+#define PCI_DEVICE_ID_APPLE_U4_PCIE	0x005b
+#define PCI_DEVICE_ID_APPLE_IPID2_AGP	0x0066
+#define PCI_DEVICE_ID_APPLE_IPID2_ATA	0x0069
+#define PCI_DEVICE_ID_APPLE_IPID2_FW	0x006a
+#define PCI_DEVICE_ID_APPLE_IPID2_GMAC	0x006b
+#define PCI_DEVICE_ID_APPLE_TIGON3	0x1645
+
+#define PCI_VENDOR_ID_YAMAHA		0x1073
+#define PCI_DEVICE_ID_YAMAHA_724	0x0004
+#define PCI_DEVICE_ID_YAMAHA_724F	0x000d
+#define PCI_DEVICE_ID_YAMAHA_740	0x000a
+#define PCI_DEVICE_ID_YAMAHA_740C	0x000c
+#define PCI_DEVICE_ID_YAMAHA_744	0x0010
+#define PCI_DEVICE_ID_YAMAHA_754	0x0012
+
+#define PCI_VENDOR_ID_QLOGIC		0x1077
+#define PCI_DEVICE_ID_QLOGIC_ISP10160	0x1016
+#define PCI_DEVICE_ID_QLOGIC_ISP1020	0x1020
+#define PCI_DEVICE_ID_QLOGIC_ISP1080	0x1080
+#define PCI_DEVICE_ID_QLOGIC_ISP12160	0x1216
+#define PCI_DEVICE_ID_QLOGIC_ISP1240	0x1240
+#define PCI_DEVICE_ID_QLOGIC_ISP1280	0x1280
+#define PCI_DEVICE_ID_QLOGIC_ISP2100	0x2100
+#define PCI_DEVICE_ID_QLOGIC_ISP2200	0x2200
+#define PCI_DEVICE_ID_QLOGIC_ISP2300	0x2300
+#define PCI_DEVICE_ID_QLOGIC_ISP2312	0x2312
+#define PCI_DEVICE_ID_QLOGIC_ISP2322	0x2322
+#define PCI_DEVICE_ID_QLOGIC_ISP6312	0x6312
+#define PCI_DEVICE_ID_QLOGIC_ISP6322	0x6322
+#define PCI_DEVICE_ID_QLOGIC_ISP2422	0x2422
+#define PCI_DEVICE_ID_QLOGIC_ISP2432	0x2432
+#define PCI_DEVICE_ID_QLOGIC_ISP2512	0x2512
+#define PCI_DEVICE_ID_QLOGIC_ISP2522	0x2522
+#define PCI_DEVICE_ID_QLOGIC_ISP5422	0x5422
+#define PCI_DEVICE_ID_QLOGIC_ISP5432	0x5432
+
+#define PCI_VENDOR_ID_CYRIX		0x1078
+#define PCI_DEVICE_ID_CYRIX_5510	0x0000
+#define PCI_DEVICE_ID_CYRIX_PCI_MASTER	0x0001
+#define PCI_DEVICE_ID_CYRIX_5520	0x0002
+#define PCI_DEVICE_ID_CYRIX_5530_LEGACY	0x0100
+#define PCI_DEVICE_ID_CYRIX_5530_IDE	0x0102
+#define PCI_DEVICE_ID_CYRIX_5530_AUDIO	0x0103
+#define PCI_DEVICE_ID_CYRIX_5530_VIDEO	0x0104
+
+#define PCI_VENDOR_ID_CONTAQ		0x1080
+#define PCI_DEVICE_ID_CONTAQ_82C693	0xc693
+
+#define PCI_VENDOR_ID_OLICOM		0x108d
+#define PCI_DEVICE_ID_OLICOM_OC2325	0x0012
+#define PCI_DEVICE_ID_OLICOM_OC2183	0x0013
+#define PCI_DEVICE_ID_OLICOM_OC2326	0x0014
+
+#define PCI_VENDOR_ID_SUN		0x108e
+#define PCI_DEVICE_ID_SUN_EBUS		0x1000
+#define PCI_DEVICE_ID_SUN_HAPPYMEAL	0x1001
+#define PCI_DEVICE_ID_SUN_RIO_EBUS	0x1100
+#define PCI_DEVICE_ID_SUN_RIO_GEM	0x1101
+#define PCI_DEVICE_ID_SUN_RIO_1394	0x1102
+#define PCI_DEVICE_ID_SUN_RIO_USB	0x1103
+#define PCI_DEVICE_ID_SUN_GEM		0x2bad
+#define PCI_DEVICE_ID_SUN_SIMBA		0x5000
+#define PCI_DEVICE_ID_SUN_PBM		0x8000
+#define PCI_DEVICE_ID_SUN_SCHIZO	0x8001
+#define PCI_DEVICE_ID_SUN_SABRE		0xa000
+#define PCI_DEVICE_ID_SUN_HUMMINGBIRD	0xa001
+#define PCI_DEVICE_ID_SUN_TOMATILLO	0xa801
+#define PCI_DEVICE_ID_SUN_CASSINI	0xabba
+
+#define PCI_VENDOR_ID_NI		0x1093
+#define PCI_DEVICE_ID_NI_PCI2322	0xd130
+#define PCI_DEVICE_ID_NI_PCI2324	0xd140
+#define PCI_DEVICE_ID_NI_PCI2328	0xd150
+#define PCI_DEVICE_ID_NI_PXI8422_2322	0xd190
+#define PCI_DEVICE_ID_NI_PXI8422_2324	0xd1a0
+#define PCI_DEVICE_ID_NI_PXI8420_2322	0xd1d0
+#define PCI_DEVICE_ID_NI_PXI8420_2324	0xd1e0
+#define PCI_DEVICE_ID_NI_PXI8420_2328	0xd1f0
+#define PCI_DEVICE_ID_NI_PXI8420_23216	0xd1f1
+#define PCI_DEVICE_ID_NI_PCI2322I	0xd250
+#define PCI_DEVICE_ID_NI_PCI2324I	0xd270
+#define PCI_DEVICE_ID_NI_PCI23216	0xd2b0
+#define PCI_DEVICE_ID_NI_PXI8430_2322	0x7080
+#define PCI_DEVICE_ID_NI_PCI8430_2322	0x70db
+#define PCI_DEVICE_ID_NI_PXI8430_2324	0x70dd
+#define PCI_DEVICE_ID_NI_PCI8430_2324	0x70df
+#define PCI_DEVICE_ID_NI_PXI8430_2328	0x70e2
+#define PCI_DEVICE_ID_NI_PCI8430_2328	0x70e4
+#define PCI_DEVICE_ID_NI_PXI8430_23216	0x70e6
+#define PCI_DEVICE_ID_NI_PCI8430_23216	0x70e7
+#define PCI_DEVICE_ID_NI_PXI8432_2322	0x70e8
+#define PCI_DEVICE_ID_NI_PCI8432_2322	0x70ea
+#define PCI_DEVICE_ID_NI_PXI8432_2324	0x70ec
+#define PCI_DEVICE_ID_NI_PCI8432_2324	0x70ee
+
+#define PCI_VENDOR_ID_CMD		0x1095
+#define PCI_DEVICE_ID_CMD_643		0x0643
+#define PCI_DEVICE_ID_CMD_646		0x0646
+#define PCI_DEVICE_ID_CMD_648		0x0648
+#define PCI_DEVICE_ID_CMD_649		0x0649
+
+#define PCI_DEVICE_ID_SII_680		0x0680
+#define PCI_DEVICE_ID_SII_3112		0x3112
+#define PCI_DEVICE_ID_SII_1210SA	0x0240
+
+#define PCI_VENDOR_ID_BROOKTREE		0x109e
+#define PCI_DEVICE_ID_BROOKTREE_878	0x0878
+#define PCI_DEVICE_ID_BROOKTREE_879	0x0879
+
+#define PCI_VENDOR_ID_SGI		0x10a9
+#define PCI_DEVICE_ID_SGI_IOC3		0x0003
+#define PCI_DEVICE_ID_SGI_LITHIUM	0x1002
+#define PCI_DEVICE_ID_SGI_IOC4		0x100a
+
+#define PCI_VENDOR_ID_WINBOND		0x10ad
+#define PCI_DEVICE_ID_WINBOND_82C105	0x0105
+#define PCI_DEVICE_ID_WINBOND_83C553	0x0565
+
+#define PCI_VENDOR_ID_PLX		0x10b5
+#define PCI_DEVICE_ID_PLX_R685		0x1030
+#define PCI_DEVICE_ID_PLX_ROMULUS	0x106a
+#define PCI_DEVICE_ID_PLX_SPCOM800	0x1076
+#define PCI_DEVICE_ID_PLX_1077		0x1077
+#define PCI_DEVICE_ID_PLX_SPCOM200	0x1103
+#define PCI_DEVICE_ID_PLX_DJINN_ITOO	0x1151
+#define PCI_DEVICE_ID_PLX_R753		0x1152
+#define PCI_DEVICE_ID_PLX_OLITEC	0x1187
+#define PCI_DEVICE_ID_PLX_PCI200SYN	0x3196
+#define PCI_DEVICE_ID_PLX_9030          0x9030
+#define PCI_DEVICE_ID_PLX_9050		0x9050
+#define PCI_DEVICE_ID_PLX_9056		0x9056
+#define PCI_DEVICE_ID_PLX_9080		0x9080
+#define PCI_DEVICE_ID_PLX_GTEK_SERIAL2	0xa001
+
+#define PCI_VENDOR_ID_MADGE		0x10b6
+#define PCI_DEVICE_ID_MADGE_MK2		0x0002
+
+#define PCI_VENDOR_ID_3COM		0x10b7
+#define PCI_DEVICE_ID_3COM_3C985	0x0001
+#define PCI_DEVICE_ID_3COM_3C940	0x1700
+#define PCI_DEVICE_ID_3COM_3C339	0x3390
+#define PCI_DEVICE_ID_3COM_3C359	0x3590
+#define PCI_DEVICE_ID_3COM_3C940B	0x80eb
+#define PCI_DEVICE_ID_3COM_3CR990	0x9900
+#define PCI_DEVICE_ID_3COM_3CR990_TX_95	0x9902
+#define PCI_DEVICE_ID_3COM_3CR990_TX_97	0x9903
+#define PCI_DEVICE_ID_3COM_3CR990B	0x9904
+#define PCI_DEVICE_ID_3COM_3CR990_FX	0x9905
+#define PCI_DEVICE_ID_3COM_3CR990SVR95	0x9908
+#define PCI_DEVICE_ID_3COM_3CR990SVR97	0x9909
+#define PCI_DEVICE_ID_3COM_3CR990SVR	0x990a
+
+#define PCI_VENDOR_ID_AL		0x10b9
+#define PCI_DEVICE_ID_AL_M1533		0x1533
+#define PCI_DEVICE_ID_AL_M1535 		0x1535
+#define PCI_DEVICE_ID_AL_M1541		0x1541
+#define PCI_DEVICE_ID_AL_M1563		0x1563
+#define PCI_DEVICE_ID_AL_M1621		0x1621
+#define PCI_DEVICE_ID_AL_M1631		0x1631
+#define PCI_DEVICE_ID_AL_M1632		0x1632
+#define PCI_DEVICE_ID_AL_M1641		0x1641
+#define PCI_DEVICE_ID_AL_M1644		0x1644
+#define PCI_DEVICE_ID_AL_M1647		0x1647
+#define PCI_DEVICE_ID_AL_M1651		0x1651
+#define PCI_DEVICE_ID_AL_M1671		0x1671
+#define PCI_DEVICE_ID_AL_M1681		0x1681
+#define PCI_DEVICE_ID_AL_M1683		0x1683
+#define PCI_DEVICE_ID_AL_M1689		0x1689
+#define PCI_DEVICE_ID_AL_M5219		0x5219
+#define PCI_DEVICE_ID_AL_M5228		0x5228
+#define PCI_DEVICE_ID_AL_M5229		0x5229
+#define PCI_DEVICE_ID_AL_M5451		0x5451
+#define PCI_DEVICE_ID_AL_M7101		0x7101
+
+#define PCI_VENDOR_ID_NEOMAGIC		0x10c8
+#define PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO 0x8005
+#define PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO 0x8006
+#define PCI_DEVICE_ID_NEOMAGIC_NM256XL_PLUS_AUDIO 0x8016
+
+#define PCI_VENDOR_ID_TCONRAD		0x10da
+#define PCI_DEVICE_ID_TCONRAD_TOKENRING	0x0508
+
+#define PCI_VENDOR_ID_NVIDIA			0x10de
+#define PCI_DEVICE_ID_NVIDIA_TNT		0x0020
+#define PCI_DEVICE_ID_NVIDIA_TNT2		0x0028
+#define PCI_DEVICE_ID_NVIDIA_UTNT2		0x0029
+#define PCI_DEVICE_ID_NVIDIA_TNT_UNKNOWN        0x002a
+#define PCI_DEVICE_ID_NVIDIA_VTNT2		0x002C
+#define PCI_DEVICE_ID_NVIDIA_UVTNT2		0x002D
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SMBUS	0x0034
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE	0x0035
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA	0x0036
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2	0x003e
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_ULTRA 0x0040
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800       0x0041
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_LE    0x0042
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_GT    0x0045
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_4000     0x004E
+#define PCI_DEVICE_ID_NVIDIA_NFORCE4_SMBUS	0x0052
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE	0x0053
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA	0x0054
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2	0x0055
+#define PCI_DEVICE_ID_NVIDIA_CK804_AUDIO	0x0059
+#define PCI_DEVICE_ID_NVIDIA_CK804_PCIE		0x005d
+#define PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS	0x0064
+#define PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE	0x0065
+#define PCI_DEVICE_ID_NVIDIA_MCP2_MODEM		0x0069
+#define PCI_DEVICE_ID_NVIDIA_MCP2_AUDIO		0x006a
+#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SMBUS	0x0084
+#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE	0x0085
+#define PCI_DEVICE_ID_NVIDIA_MCP2S_MODEM	0x0089
+#define PCI_DEVICE_ID_NVIDIA_CK8_AUDIO		0x008a
+#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA	0x008e
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_7800_GT   0x0090
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_7800_GTX	0x0091
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_7800   0x0098
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_7800_GTX 0x0099
+#define PCI_DEVICE_ID_NVIDIA_ITNT2		0x00A0
+#define PCI_DEVICE_ID_GEFORCE_6800A             0x00c1
+#define PCI_DEVICE_ID_GEFORCE_6800A_LE          0x00c2
+#define PCI_DEVICE_ID_GEFORCE_GO_6800           0x00c8
+#define PCI_DEVICE_ID_GEFORCE_GO_6800_ULTRA     0x00c9
+#define PCI_DEVICE_ID_QUADRO_FX_GO1400          0x00cc
+#define PCI_DEVICE_ID_QUADRO_FX_1400            0x00ce
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3		0x00d1
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS	0x00d4
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE	0x00d5
+#define PCI_DEVICE_ID_NVIDIA_MCP3_MODEM		0x00d9
+#define PCI_DEVICE_ID_NVIDIA_MCP3_AUDIO		0x00da
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S		0x00e1
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA	0x00e3
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SMBUS	0x00e4
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE	0x00e5
+#define PCI_DEVICE_ID_NVIDIA_CK8S_AUDIO		0x00ea
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2	0x00ee
+#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6800_ALT1 0x00f0
+#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6600_ALT1 0x00f1
+#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6600_ALT2 0x00f2
+#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6200_ALT1 0x00f3
+#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6800_GT   0x00f9
+#define PCIE_DEVICE_ID_NVIDIA_QUADRO_NVS280	0x00fd
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_SDR	0x0100
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_DDR	0x0101
+#define PCI_DEVICE_ID_NVIDIA_QUADRO		0x0103
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_MX	0x0110
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_MX2	0x0111
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GO	0x0112
+#define PCI_DEVICE_ID_NVIDIA_QUADRO2_MXR	0x0113
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6600_GT	0x0140
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6600	0x0141
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6610_XL	0x0145
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_540	0x014E
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6200	0x014F
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS	0x0150
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS2	0x0151
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_ULTRA	0x0152
+#define PCI_DEVICE_ID_NVIDIA_QUADRO2_PRO	0x0153
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6200_TURBOCACHE 0x0161
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6200    0x0164
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6250    0x0166
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6200_1  0x0167
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6250_1  0x0168
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_460	0x0170
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440	0x0171
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_420	0x0172
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440_SE	0x0173
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_440_GO	0x0174
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_420_GO	0x0175
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_420_GO_M32 0x0176
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_460_GO    0x0177
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_500XGL	0x0178
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_440_GO_M64 0x0179
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_200	0x017A
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_550XGL	0x017B
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_500_GOGL	0x017C
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_410_GO_M16 0x017D
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440_8X 0x0181
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440SE_8X 0x0182
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_420_8X 0x0183
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_4000   0x0185
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_448_GO    0x0186
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_488_GO    0x0187
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_580_XGL    0x0188
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_MAC    0x0189
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_280_NVS    0x018A
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_380_XGL    0x018B
+#define PCI_DEVICE_ID_NVIDIA_IGEFORCE2		0x01a0
+#define PCI_DEVICE_ID_NVIDIA_NFORCE		0x01a4
+#define PCI_DEVICE_ID_NVIDIA_MCP1_AUDIO		0x01b1
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_SMBUS	0x01b4
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_IDE		0x01bc
+#define PCI_DEVICE_ID_NVIDIA_MCP1_MODEM		0x01c1
+#define PCI_DEVICE_ID_NVIDIA_NFORCE2		0x01e0
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE3		0x0200
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE3_1		0x0201
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE3_2		0x0202
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_DDC		0x0203
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B      0x0211
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B_LE   0x0212
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B_GT   0x0215
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4600	0x0250
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4400	0x0251
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4200	0x0253
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_900XGL	0x0258
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_750XGL	0x0259
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_700XGL	0x025B
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SMBUS	0x0264
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE	0x0265
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA	0x0266
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2	0x0267
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SMBUS	0x0368
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE	0x036E
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA	0x037E
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2	0x037F
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800	0x0280
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800_8X    0x0281
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800SE     0x0282
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_4200_GO       0x0286
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_980_XGL        0x0288
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_780_XGL        0x0289
+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_700_GOGL       0x028C
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5800_ULTRA  0x0301
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5800        0x0302
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_2000         0x0308
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1000         0x0309
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600_ULTRA  0x0311
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600        0x0312
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600SE      0x0314
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5600      0x031A
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5650      0x031B
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO700        0x031C
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200        0x0320
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200_ULTRA  0x0321
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200_1      0x0322
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200SE      0x0323
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5200      0x0324
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5250      0x0325
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5500        0x0326
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5100        0x0327
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5250_32   0x0328
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO_5200	    0x0329
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_NVS_280_PCI     0x032A
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_500          0x032B
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5300      0x032C
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5100      0x032D
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900_ULTRA  0x0330
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900        0x0331
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900XT      0x0332
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5950_ULTRA  0x0333
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900ZT      0x0334
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_3000         0x0338
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_700          0x033F
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700_ULTRA  0x0341
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700        0x0342
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700LE      0x0343
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700VE      0x0344
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_1    0x0347
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_2    0x0348
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO1000       0x034C
+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1100         0x034E
+#define PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V0	    0x0360
+#define PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V4	    0x0364
+#define PCI_DEVICE_ID_NVIDIA_NVENET_15              0x0373
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA      0x03E7
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SMBUS	    0x03EB
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE       0x03EC
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2     0x03F6
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3     0x03F7
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_SMBUS	    0x0446
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE	    0x0448
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_SMBUS     0x0542
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE       0x0560
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE       0x056C
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP78S_SMBUS    0x0752
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE       0x0759
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_SMBUS     0x07D8
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP79_SMBUS     0x0AA2
+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP89_SATA	    0x0D85
+
+#define PCI_VENDOR_ID_IMS		0x10e0
+#define PCI_DEVICE_ID_IMS_TT128		0x9128
+#define PCI_DEVICE_ID_IMS_TT3D		0x9135
+
+#define PCI_VENDOR_ID_INTERG		0x10ea
+#define PCI_DEVICE_ID_INTERG_1682	0x1682
+#define PCI_DEVICE_ID_INTERG_2000	0x2000
+#define PCI_DEVICE_ID_INTERG_2010	0x2010
+#define PCI_DEVICE_ID_INTERG_5000	0x5000
+#define PCI_DEVICE_ID_INTERG_5050	0x5050
+
+#define PCI_VENDOR_ID_REALTEK		0x10ec
+#define PCI_DEVICE_ID_REALTEK_8139	0x8139
+
+#define PCI_VENDOR_ID_XILINX		0x10ee
+#define PCI_DEVICE_ID_RME_DIGI96	0x3fc0
+#define PCI_DEVICE_ID_RME_DIGI96_8	0x3fc1
+#define PCI_DEVICE_ID_RME_DIGI96_8_PRO	0x3fc2
+#define PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST 0x3fc3
+#define PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP 0x3fc5
+#define PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP_MADI 0x3fc6
+
+#define PCI_VENDOR_ID_INIT		0x1101
+
+#define PCI_VENDOR_ID_CREATIVE		0x1102 /* duplicate: ECTIVA */
+#define PCI_DEVICE_ID_CREATIVE_EMU10K1	0x0002
+#define PCI_DEVICE_ID_CREATIVE_20K1	0x0005
+#define PCI_DEVICE_ID_CREATIVE_20K2	0x000b
+#define PCI_SUBDEVICE_ID_CREATIVE_SB0760	0x0024
+#define PCI_SUBDEVICE_ID_CREATIVE_SB08801	0x0041
+#define PCI_SUBDEVICE_ID_CREATIVE_SB08802	0x0042
+#define PCI_SUBDEVICE_ID_CREATIVE_SB08803	0x0043
+#define PCI_SUBDEVICE_ID_CREATIVE_SB1270	0x0062
+#define PCI_SUBDEVICE_ID_CREATIVE_HENDRIX	0x6000
+
+#define PCI_VENDOR_ID_ECTIVA		0x1102 /* duplicate: CREATIVE */
+#define PCI_DEVICE_ID_ECTIVA_EV1938	0x8938
+
+#define PCI_VENDOR_ID_TTI		0x1103
+#define PCI_DEVICE_ID_TTI_HPT343	0x0003
+#define PCI_DEVICE_ID_TTI_HPT366	0x0004
+#define PCI_DEVICE_ID_TTI_HPT372	0x0005
+#define PCI_DEVICE_ID_TTI_HPT302	0x0006
+#define PCI_DEVICE_ID_TTI_HPT371	0x0007
+#define PCI_DEVICE_ID_TTI_HPT374	0x0008
+#define PCI_DEVICE_ID_TTI_HPT372N	0x0009	/* apparently a 372N variant? */
+
+#define PCI_VENDOR_ID_VIA		0x1106
+#define PCI_DEVICE_ID_VIA_8763_0	0x0198
+#define PCI_DEVICE_ID_VIA_8380_0	0x0204
+#define PCI_DEVICE_ID_VIA_3238_0	0x0238
+#define PCI_DEVICE_ID_VIA_PT880		0x0258
+#define PCI_DEVICE_ID_VIA_PT880ULTRA	0x0308
+#define PCI_DEVICE_ID_VIA_PX8X0_0	0x0259
+#define PCI_DEVICE_ID_VIA_3269_0	0x0269
+#define PCI_DEVICE_ID_VIA_K8T800PRO_0	0x0282
+#define PCI_DEVICE_ID_VIA_3296_0	0x0296
+#define PCI_DEVICE_ID_VIA_8363_0	0x0305
+#define PCI_DEVICE_ID_VIA_P4M800CE	0x0314
+#define PCI_DEVICE_ID_VIA_P4M890	0x0327
+#define PCI_DEVICE_ID_VIA_VT3324	0x0324
+#define PCI_DEVICE_ID_VIA_VT3336	0x0336
+#define PCI_DEVICE_ID_VIA_VT3351	0x0351
+#define PCI_DEVICE_ID_VIA_VT3364	0x0364
+#define PCI_DEVICE_ID_VIA_8371_0	0x0391
+#define PCI_DEVICE_ID_VIA_6415		0x0415
+#define PCI_DEVICE_ID_VIA_8501_0	0x0501
+#define PCI_DEVICE_ID_VIA_82C561	0x0561
+#define PCI_DEVICE_ID_VIA_82C586_1	0x0571
+#define PCI_DEVICE_ID_VIA_82C576	0x0576
+#define PCI_DEVICE_ID_VIA_82C586_0	0x0586
+#define PCI_DEVICE_ID_VIA_82C596	0x0596
+#define PCI_DEVICE_ID_VIA_82C597_0	0x0597
+#define PCI_DEVICE_ID_VIA_82C598_0	0x0598
+#define PCI_DEVICE_ID_VIA_8601_0	0x0601
+#define PCI_DEVICE_ID_VIA_8605_0	0x0605
+#define PCI_DEVICE_ID_VIA_82C686	0x0686
+#define PCI_DEVICE_ID_VIA_82C691_0	0x0691
+#define PCI_DEVICE_ID_VIA_82C576_1	0x1571
+#define PCI_DEVICE_ID_VIA_82C586_2	0x3038
+#define PCI_DEVICE_ID_VIA_82C586_3	0x3040
+#define PCI_DEVICE_ID_VIA_82C596_3	0x3050
+#define PCI_DEVICE_ID_VIA_82C596B_3	0x3051
+#define PCI_DEVICE_ID_VIA_82C686_4	0x3057
+#define PCI_DEVICE_ID_VIA_82C686_5	0x3058
+#define PCI_DEVICE_ID_VIA_8233_5	0x3059
+#define PCI_DEVICE_ID_VIA_8233_0	0x3074
+#define PCI_DEVICE_ID_VIA_8633_0	0x3091
+#define PCI_DEVICE_ID_VIA_8367_0	0x3099
+#define PCI_DEVICE_ID_VIA_8653_0	0x3101
+#define PCI_DEVICE_ID_VIA_8622		0x3102
+#define PCI_DEVICE_ID_VIA_8235_USB_2	0x3104
+#define PCI_DEVICE_ID_VIA_8233C_0	0x3109
+#define PCI_DEVICE_ID_VIA_8361		0x3112
+#define PCI_DEVICE_ID_VIA_XM266		0x3116
+#define PCI_DEVICE_ID_VIA_612X		0x3119
+#define PCI_DEVICE_ID_VIA_862X_0	0x3123
+#define PCI_DEVICE_ID_VIA_8753_0	0x3128
+#define PCI_DEVICE_ID_VIA_8233A		0x3147
+#define PCI_DEVICE_ID_VIA_8703_51_0	0x3148
+#define PCI_DEVICE_ID_VIA_8237_SATA	0x3149
+#define PCI_DEVICE_ID_VIA_XN266		0x3156
+#define PCI_DEVICE_ID_VIA_6410		0x3164
+#define PCI_DEVICE_ID_VIA_8754C_0	0x3168
+#define PCI_DEVICE_ID_VIA_8235		0x3177
+#define PCI_DEVICE_ID_VIA_8385_0	0x3188
+#define PCI_DEVICE_ID_VIA_8377_0	0x3189
+#define PCI_DEVICE_ID_VIA_8378_0	0x3205
+#define PCI_DEVICE_ID_VIA_8783_0	0x3208
+#define PCI_DEVICE_ID_VIA_8237		0x3227
+#define PCI_DEVICE_ID_VIA_8251		0x3287
+#define PCI_DEVICE_ID_VIA_8261		0x3402
+#define PCI_DEVICE_ID_VIA_8237A		0x3337
+#define PCI_DEVICE_ID_VIA_8237S		0x3372
+#define PCI_DEVICE_ID_VIA_SATA_EIDE	0x5324
+#define PCI_DEVICE_ID_VIA_8231		0x8231
+#define PCI_DEVICE_ID_VIA_8231_4	0x8235
+#define PCI_DEVICE_ID_VIA_8365_1	0x8305
+#define PCI_DEVICE_ID_VIA_CX700		0x8324
+#define PCI_DEVICE_ID_VIA_CX700_IDE	0x0581
+#define PCI_DEVICE_ID_VIA_VX800		0x8353
+#define PCI_DEVICE_ID_VIA_VX855		0x8409
+#define PCI_DEVICE_ID_VIA_8371_1	0x8391
+#define PCI_DEVICE_ID_VIA_82C598_1	0x8598
+#define PCI_DEVICE_ID_VIA_838X_1	0xB188
+#define PCI_DEVICE_ID_VIA_83_87XX_1	0xB198
+#define PCI_DEVICE_ID_VIA_VX855_IDE	0xC409
+#define PCI_DEVICE_ID_VIA_ANON		0xFFFF
+
+#define PCI_VENDOR_ID_SIEMENS           0x110A
+#define PCI_DEVICE_ID_SIEMENS_DSCC4     0x2102
+
+#define PCI_VENDOR_ID_VORTEX		0x1119
+#define PCI_DEVICE_ID_VORTEX_GDT60x0	0x0000
+#define PCI_DEVICE_ID_VORTEX_GDT6000B	0x0001
+#define PCI_DEVICE_ID_VORTEX_GDT6x10	0x0002
+#define PCI_DEVICE_ID_VORTEX_GDT6x20	0x0003
+#define PCI_DEVICE_ID_VORTEX_GDT6530	0x0004
+#define PCI_DEVICE_ID_VORTEX_GDT6550	0x0005
+#define PCI_DEVICE_ID_VORTEX_GDT6x17	0x0006
+#define PCI_DEVICE_ID_VORTEX_GDT6x27	0x0007
+#define PCI_DEVICE_ID_VORTEX_GDT6537	0x0008
+#define PCI_DEVICE_ID_VORTEX_GDT6557	0x0009
+#define PCI_DEVICE_ID_VORTEX_GDT6x15	0x000a
+#define PCI_DEVICE_ID_VORTEX_GDT6x25	0x000b
+#define PCI_DEVICE_ID_VORTEX_GDT6535	0x000c
+#define PCI_DEVICE_ID_VORTEX_GDT6555	0x000d
+#define PCI_DEVICE_ID_VORTEX_GDT6x17RP	0x0100
+#define PCI_DEVICE_ID_VORTEX_GDT6x27RP	0x0101
+#define PCI_DEVICE_ID_VORTEX_GDT6537RP	0x0102
+#define PCI_DEVICE_ID_VORTEX_GDT6557RP	0x0103
+#define PCI_DEVICE_ID_VORTEX_GDT6x11RP	0x0104
+#define PCI_DEVICE_ID_VORTEX_GDT6x21RP	0x0105
+
+#define PCI_VENDOR_ID_EF		0x111a
+#define PCI_DEVICE_ID_EF_ATM_FPGA	0x0000
+#define PCI_DEVICE_ID_EF_ATM_ASIC	0x0002
+#define PCI_DEVICE_ID_EF_ATM_LANAI2	0x0003
+#define PCI_DEVICE_ID_EF_ATM_LANAIHB	0x0005
+
+#define PCI_VENDOR_ID_IDT		0x111d
+#define PCI_DEVICE_ID_IDT_IDT77201	0x0001
+
+#define PCI_VENDOR_ID_FORE		0x1127
+#define PCI_DEVICE_ID_FORE_PCA200E	0x0300
+
+#define PCI_VENDOR_ID_PHILIPS		0x1131
+#define PCI_DEVICE_ID_PHILIPS_SAA7146	0x7146
+#define PCI_DEVICE_ID_PHILIPS_SAA9730	0x9730
+
+#define PCI_VENDOR_ID_EICON		0x1133
+#define PCI_DEVICE_ID_EICON_DIVA20	0xe002
+#define PCI_DEVICE_ID_EICON_DIVA20_U	0xe004
+#define PCI_DEVICE_ID_EICON_DIVA201	0xe005
+#define PCI_DEVICE_ID_EICON_DIVA202	0xe00b
+#define PCI_DEVICE_ID_EICON_MAESTRA	0xe010
+#define PCI_DEVICE_ID_EICON_MAESTRAQ	0xe012
+#define PCI_DEVICE_ID_EICON_MAESTRAQ_U	0xe013
+#define PCI_DEVICE_ID_EICON_MAESTRAP	0xe014
+
+#define PCI_VENDOR_ID_CISCO		0x1137
+
+#define PCI_VENDOR_ID_ZIATECH		0x1138
+#define PCI_DEVICE_ID_ZIATECH_5550_HC	0x5550
+
+
+#define PCI_VENDOR_ID_SYSKONNECT	0x1148
+#define PCI_DEVICE_ID_SYSKONNECT_TR	0x4200
+#define PCI_DEVICE_ID_SYSKONNECT_GE	0x4300
+#define PCI_DEVICE_ID_SYSKONNECT_YU	0x4320
+#define PCI_DEVICE_ID_SYSKONNECT_9DXX	0x4400
+#define PCI_DEVICE_ID_SYSKONNECT_9MXX	0x4500
+
+#define PCI_VENDOR_ID_DIGI		0x114f
+#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_E	0x0070
+#define PCI_DEVICE_ID_DIGI_DF_M_E	0x0071
+#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_A	0x0072
+#define PCI_DEVICE_ID_DIGI_DF_M_A	0x0073
+#define PCI_DEVICE_ID_DIGI_NEO_8	0x00B1
+#define PCI_DEVICE_ID_NEO_2DB9          0x00C8
+#define PCI_DEVICE_ID_NEO_2DB9PRI       0x00C9
+#define PCI_DEVICE_ID_NEO_2RJ45         0x00CA
+#define PCI_DEVICE_ID_NEO_2RJ45PRI      0x00CB
+#define PCIE_DEVICE_ID_NEO_4_IBM        0x00F4
+
+#define PCI_VENDOR_ID_XIRCOM		0x115d
+#define PCI_DEVICE_ID_XIRCOM_RBM56G	0x0101
+#define PCI_DEVICE_ID_XIRCOM_X3201_MDM	0x0103
+
+#define PCI_VENDOR_ID_SERVERWORKS	  0x1166
+#define PCI_DEVICE_ID_SERVERWORKS_HE	  0x0008
+#define PCI_DEVICE_ID_SERVERWORKS_LE	  0x0009
+#define PCI_DEVICE_ID_SERVERWORKS_GCNB_LE 0x0017
+#define PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB	0x0036
+#define PCI_DEVICE_ID_SERVERWORKS_EPB	  0x0103
+#define PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE	0x0132
+#define PCI_DEVICE_ID_SERVERWORKS_OSB4	  0x0200
+#define PCI_DEVICE_ID_SERVERWORKS_CSB5	  0x0201
+#define PCI_DEVICE_ID_SERVERWORKS_CSB6    0x0203
+#define PCI_DEVICE_ID_SERVERWORKS_HT1000SB 0x0205
+#define PCI_DEVICE_ID_SERVERWORKS_OSB4IDE 0x0211
+#define PCI_DEVICE_ID_SERVERWORKS_CSB5IDE 0x0212
+#define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE 0x0213
+#define PCI_DEVICE_ID_SERVERWORKS_HT1000IDE 0x0214
+#define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2 0x0217
+#define PCI_DEVICE_ID_SERVERWORKS_CSB6LPC 0x0227
+#define PCI_DEVICE_ID_SERVERWORKS_HT1100LD 0x0408
+
+#define PCI_VENDOR_ID_SBE		0x1176
+#define PCI_DEVICE_ID_SBE_WANXL100	0x0301
+#define PCI_DEVICE_ID_SBE_WANXL200	0x0302
+#define PCI_DEVICE_ID_SBE_WANXL400	0x0104
+#define PCI_SUBDEVICE_ID_SBE_T3E3	0x0009
+#define PCI_SUBDEVICE_ID_SBE_2T3E3_P0	0x0901
+#define PCI_SUBDEVICE_ID_SBE_2T3E3_P1	0x0902
+
+#define PCI_VENDOR_ID_TOSHIBA		0x1179
+#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_1	0x0101
+#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_2	0x0102
+#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_3	0x0103
+#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_5	0x0105
+#define PCI_DEVICE_ID_TOSHIBA_TOPIC95	0x060a
+#define PCI_DEVICE_ID_TOSHIBA_TOPIC97	0x060f
+#define PCI_DEVICE_ID_TOSHIBA_TOPIC100	0x0617
+
+#define PCI_VENDOR_ID_TOSHIBA_2		0x102f
+#define PCI_DEVICE_ID_TOSHIBA_TC35815CF	0x0030
+#define PCI_DEVICE_ID_TOSHIBA_TC35815_NWU	0x0031
+#define PCI_DEVICE_ID_TOSHIBA_TC35815_TX4939	0x0032
+#define PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE	0x0105
+#define PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC	0x0108
+#define PCI_DEVICE_ID_TOSHIBA_SPIDER_NET 0x01b3
+
+#define PCI_VENDOR_ID_ATTO		0x117c
+
+#define PCI_VENDOR_ID_RICOH		0x1180
+#define PCI_DEVICE_ID_RICOH_RL5C465	0x0465
+#define PCI_DEVICE_ID_RICOH_RL5C466	0x0466
+#define PCI_DEVICE_ID_RICOH_RL5C475	0x0475
+#define PCI_DEVICE_ID_RICOH_RL5C476	0x0476
+#define PCI_DEVICE_ID_RICOH_RL5C478	0x0478
+#define PCI_DEVICE_ID_RICOH_R5C822	0x0822
+#define PCI_DEVICE_ID_RICOH_R5CE823	0xe823
+#define PCI_DEVICE_ID_RICOH_R5C832	0x0832
+#define PCI_DEVICE_ID_RICOH_R5C843	0x0843
+
+#define PCI_VENDOR_ID_DLINK		0x1186
+#define PCI_DEVICE_ID_DLINK_DGE510T	0x4c00
+
+#define PCI_VENDOR_ID_ARTOP		0x1191
+#define PCI_DEVICE_ID_ARTOP_ATP850UF	0x0005
+#define PCI_DEVICE_ID_ARTOP_ATP860	0x0006
+#define PCI_DEVICE_ID_ARTOP_ATP860R	0x0007
+#define PCI_DEVICE_ID_ARTOP_ATP865	0x0008
+#define PCI_DEVICE_ID_ARTOP_ATP865R	0x0009
+#define PCI_DEVICE_ID_ARTOP_ATP867A	0x000A
+#define PCI_DEVICE_ID_ARTOP_ATP867B	0x000B
+#define PCI_DEVICE_ID_ARTOP_AEC7610	0x8002
+#define PCI_DEVICE_ID_ARTOP_AEC7612UW	0x8010
+#define PCI_DEVICE_ID_ARTOP_AEC7612U	0x8020
+#define PCI_DEVICE_ID_ARTOP_AEC7612S	0x8030
+#define PCI_DEVICE_ID_ARTOP_AEC7612D	0x8040
+#define PCI_DEVICE_ID_ARTOP_AEC7612SUW	0x8050
+#define PCI_DEVICE_ID_ARTOP_8060	0x8060
+
+#define PCI_VENDOR_ID_ZEITNET		0x1193
+#define PCI_DEVICE_ID_ZEITNET_1221	0x0001
+#define PCI_DEVICE_ID_ZEITNET_1225	0x0002
+
+#define PCI_VENDOR_ID_FUJITSU_ME	0x119e
+#define PCI_DEVICE_ID_FUJITSU_FS155	0x0001
+#define PCI_DEVICE_ID_FUJITSU_FS50	0x0003
+
+#define PCI_SUBVENDOR_ID_KEYSPAN	0x11a9
+#define PCI_SUBDEVICE_ID_KEYSPAN_SX2	0x5334
+
+#define PCI_VENDOR_ID_MARVELL		0x11ab
+#define PCI_DEVICE_ID_MARVELL_GT64111	0x4146
+#define PCI_DEVICE_ID_MARVELL_GT64260	0x6430
+#define PCI_DEVICE_ID_MARVELL_MV64360	0x6460
+#define PCI_DEVICE_ID_MARVELL_MV64460	0x6480
+#define PCI_DEVICE_ID_MARVELL_88ALP01_NAND	0x4100
+#define PCI_DEVICE_ID_MARVELL_88ALP01_SD	0x4101
+#define PCI_DEVICE_ID_MARVELL_88ALP01_CCIC	0x4102
+
+#define PCI_VENDOR_ID_V3		0x11b0
+#define PCI_DEVICE_ID_V3_V960		0x0001
+#define PCI_DEVICE_ID_V3_V351		0x0002
+
+#define PCI_VENDOR_ID_ATT		0x11c1
+#define PCI_DEVICE_ID_ATT_VENUS_MODEM	0x480
+
+#define PCI_VENDOR_ID_SPECIALIX		0x11cb
+#define PCI_DEVICE_ID_SPECIALIX_IO8	0x2000
+#define PCI_DEVICE_ID_SPECIALIX_RIO	0x8000
+#define PCI_SUBDEVICE_ID_SPECIALIX_SPEED4 0xa004
+
+#define PCI_VENDOR_ID_ANALOG_DEVICES	0x11d4
+#define PCI_DEVICE_ID_AD1889JS		0x1889
+
+#define PCI_DEVICE_ID_SEGA_BBA		0x1234
+
+#define PCI_VENDOR_ID_ZORAN		0x11de
+#define PCI_DEVICE_ID_ZORAN_36057	0x6057
+#define PCI_DEVICE_ID_ZORAN_36120	0x6120
+
+#define PCI_VENDOR_ID_COMPEX		0x11f6
+#define PCI_DEVICE_ID_COMPEX_ENET100VG4	0x0112
+
+#define PCI_VENDOR_ID_PMC_Sierra	0x11f8
+
+#define PCI_VENDOR_ID_RP		0x11fe
+#define PCI_DEVICE_ID_RP32INTF		0x0001
+#define PCI_DEVICE_ID_RP8INTF		0x0002
+#define PCI_DEVICE_ID_RP16INTF		0x0003
+#define PCI_DEVICE_ID_RP4QUAD		0x0004
+#define PCI_DEVICE_ID_RP8OCTA		0x0005
+#define PCI_DEVICE_ID_RP8J		0x0006
+#define PCI_DEVICE_ID_RP4J		0x0007
+#define PCI_DEVICE_ID_RP8SNI		0x0008
+#define PCI_DEVICE_ID_RP16SNI		0x0009
+#define PCI_DEVICE_ID_RPP4		0x000A
+#define PCI_DEVICE_ID_RPP8		0x000B
+#define PCI_DEVICE_ID_RP4M		0x000D
+#define PCI_DEVICE_ID_RP2_232		0x000E
+#define PCI_DEVICE_ID_RP2_422		0x000F
+#define PCI_DEVICE_ID_URP32INTF		0x0801
+#define PCI_DEVICE_ID_URP8INTF		0x0802
+#define PCI_DEVICE_ID_URP16INTF		0x0803
+#define PCI_DEVICE_ID_URP8OCTA		0x0805
+#define PCI_DEVICE_ID_UPCI_RM3_8PORT	0x080C
+#define PCI_DEVICE_ID_UPCI_RM3_4PORT	0x080D
+#define PCI_DEVICE_ID_CRP16INTF		0x0903
+
+#define PCI_VENDOR_ID_CYCLADES		0x120e
+#define PCI_DEVICE_ID_CYCLOM_Y_Lo	0x0100
+#define PCI_DEVICE_ID_CYCLOM_Y_Hi	0x0101
+#define PCI_DEVICE_ID_CYCLOM_4Y_Lo	0x0102
+#define PCI_DEVICE_ID_CYCLOM_4Y_Hi	0x0103
+#define PCI_DEVICE_ID_CYCLOM_8Y_Lo	0x0104
+#define PCI_DEVICE_ID_CYCLOM_8Y_Hi	0x0105
+#define PCI_DEVICE_ID_CYCLOM_Z_Lo	0x0200
+#define PCI_DEVICE_ID_CYCLOM_Z_Hi	0x0201
+#define PCI_DEVICE_ID_PC300_RX_2	0x0300
+#define PCI_DEVICE_ID_PC300_RX_1	0x0301
+#define PCI_DEVICE_ID_PC300_TE_2	0x0310
+#define PCI_DEVICE_ID_PC300_TE_1	0x0311
+#define PCI_DEVICE_ID_PC300_TE_M_2	0x0320
+#define PCI_DEVICE_ID_PC300_TE_M_1	0x0321
+
+#define PCI_VENDOR_ID_ESSENTIAL		0x120f
+#define PCI_DEVICE_ID_ESSENTIAL_ROADRUNNER	0x0001
+
+#define PCI_VENDOR_ID_O2		0x1217
+#define PCI_DEVICE_ID_O2_6729		0x6729
+#define PCI_DEVICE_ID_O2_6730		0x673a
+#define PCI_DEVICE_ID_O2_6832		0x6832
+#define PCI_DEVICE_ID_O2_6836		0x6836
+#define PCI_DEVICE_ID_O2_6812		0x6872
+#define PCI_DEVICE_ID_O2_6933		0x6933
+#define PCI_DEVICE_ID_O2_8120		0x8120
+#define PCI_DEVICE_ID_O2_8220		0x8220
+#define PCI_DEVICE_ID_O2_8221		0x8221
+#define PCI_DEVICE_ID_O2_8320		0x8320
+#define PCI_DEVICE_ID_O2_8321		0x8321
+
+#define PCI_VENDOR_ID_3DFX		0x121a
+#define PCI_DEVICE_ID_3DFX_VOODOO	0x0001
+#define PCI_DEVICE_ID_3DFX_VOODOO2	0x0002
+#define PCI_DEVICE_ID_3DFX_BANSHEE	0x0003
+#define PCI_DEVICE_ID_3DFX_VOODOO3	0x0005
+#define PCI_DEVICE_ID_3DFX_VOODOO5	0x0009
+
+#define PCI_VENDOR_ID_AVM		0x1244
+#define PCI_DEVICE_ID_AVM_B1		0x0700
+#define PCI_DEVICE_ID_AVM_C4		0x0800
+#define PCI_DEVICE_ID_AVM_A1		0x0a00
+#define PCI_DEVICE_ID_AVM_A1_V2		0x0e00
+#define PCI_DEVICE_ID_AVM_C2		0x1100
+#define PCI_DEVICE_ID_AVM_T1		0x1200
+
+#define PCI_VENDOR_ID_STALLION		0x124d
+
+/* Allied Telesyn */
+#define PCI_VENDOR_ID_AT    		0x1259
+#define PCI_SUBDEVICE_ID_AT_2700FX	0x2701
+#define PCI_SUBDEVICE_ID_AT_2701FX	0x2703
+
+#define PCI_VENDOR_ID_ESS		0x125d
+#define PCI_DEVICE_ID_ESS_ESS1968	0x1968
+#define PCI_DEVICE_ID_ESS_ESS1978	0x1978
+#define PCI_DEVICE_ID_ESS_ALLEGRO_1	0x1988
+#define PCI_DEVICE_ID_ESS_ALLEGRO	0x1989
+#define PCI_DEVICE_ID_ESS_CANYON3D_2LE	0x1990
+#define PCI_DEVICE_ID_ESS_CANYON3D_2	0x1992
+#define PCI_DEVICE_ID_ESS_MAESTRO3	0x1998
+#define PCI_DEVICE_ID_ESS_MAESTRO3_1	0x1999
+#define PCI_DEVICE_ID_ESS_MAESTRO3_HW	0x199a
+#define PCI_DEVICE_ID_ESS_MAESTRO3_2	0x199b
+
+#define PCI_VENDOR_ID_SATSAGEM		0x1267
+#define PCI_DEVICE_ID_SATSAGEM_NICCY	0x1016
+
+#define PCI_VENDOR_ID_ENSONIQ		0x1274
+#define PCI_DEVICE_ID_ENSONIQ_CT5880	0x5880
+#define PCI_DEVICE_ID_ENSONIQ_ES1370	0x5000
+#define PCI_DEVICE_ID_ENSONIQ_ES1371	0x1371
+
+#define PCI_VENDOR_ID_TRANSMETA		0x1279
+#define PCI_DEVICE_ID_EFFICEON		0x0060
+
+#define PCI_VENDOR_ID_ROCKWELL		0x127A
+
+#define PCI_VENDOR_ID_ITE		0x1283
+#define PCI_DEVICE_ID_ITE_8172		0x8172
+#define PCI_DEVICE_ID_ITE_8211		0x8211
+#define PCI_DEVICE_ID_ITE_8212		0x8212
+#define PCI_DEVICE_ID_ITE_8213		0x8213
+#define PCI_DEVICE_ID_ITE_8152		0x8152
+#define PCI_DEVICE_ID_ITE_8872		0x8872
+#define PCI_DEVICE_ID_ITE_IT8330G_0	0xe886
+
+/* formerly Platform Tech */
+#define PCI_DEVICE_ID_ESS_ESS0100	0x0100
+
+#define PCI_VENDOR_ID_ALTEON		0x12ae
+
+#define PCI_SUBVENDOR_ID_CONNECT_TECH			0x12c4
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232		0x0001
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232		0x0002
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232		0x0003
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485		0x0004
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4	0x0005
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485		0x0006
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2	0x0007
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485		0x0008
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6	0x0009
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1	0x000A
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1	0x000B
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_20MHZ		0x000C
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_PTM		0x000D
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_NT960PCI		0x0100
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_2		0x0201
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4		0x0202
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_232	0x0300
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_232	0x0301
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_232	0x0302
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_1_1	0x0310
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_2	0x0311
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4	0x0312
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2	0x0320
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4	0x0321
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8	0x0322
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_485	0x0330
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_485	0x0331
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485	0x0332
+
+#define PCI_VENDOR_ID_NVIDIA_SGS	0x12d2
+#define PCI_DEVICE_ID_NVIDIA_SGS_RIVA128 0x0018
+
+#define PCI_SUBVENDOR_ID_CHASE_PCIFAST		0x12E0
+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST4		0x0031
+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST8		0x0021
+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST16	0x0011
+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC	0x0041
+#define PCI_SUBVENDOR_ID_CHASE_PCIRAS		0x124D
+#define PCI_SUBDEVICE_ID_CHASE_PCIRAS4		0xF001
+#define PCI_SUBDEVICE_ID_CHASE_PCIRAS8		0xF010
+
+#define PCI_VENDOR_ID_AUREAL		0x12eb
+#define PCI_DEVICE_ID_AUREAL_VORTEX_1	0x0001
+#define PCI_DEVICE_ID_AUREAL_VORTEX_2	0x0002
+#define PCI_DEVICE_ID_AUREAL_ADVANTAGE	0x0003
+
+#define PCI_VENDOR_ID_ELECTRONICDESIGNGMBH 0x12f8
+#define PCI_DEVICE_ID_LML_33R10		0x8a02
+
+#define PCI_VENDOR_ID_ESDGMBH		0x12fe
+#define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
+
+#define PCI_VENDOR_ID_SIIG		0x131f
+#define PCI_SUBVENDOR_ID_SIIG		0x131f
+#define PCI_DEVICE_ID_SIIG_1S_10x_550	0x1000
+#define PCI_DEVICE_ID_SIIG_1S_10x_650	0x1001
+#define PCI_DEVICE_ID_SIIG_1S_10x_850	0x1002
+#define PCI_DEVICE_ID_SIIG_1S1P_10x_550	0x1010
+#define PCI_DEVICE_ID_SIIG_1S1P_10x_650	0x1011
+#define PCI_DEVICE_ID_SIIG_1S1P_10x_850	0x1012
+#define PCI_DEVICE_ID_SIIG_1P_10x	0x1020
+#define PCI_DEVICE_ID_SIIG_2P_10x	0x1021
+#define PCI_DEVICE_ID_SIIG_2S_10x_550	0x1030
+#define PCI_DEVICE_ID_SIIG_2S_10x_650	0x1031
+#define PCI_DEVICE_ID_SIIG_2S_10x_850	0x1032
+#define PCI_DEVICE_ID_SIIG_2S1P_10x_550	0x1034
+#define PCI_DEVICE_ID_SIIG_2S1P_10x_650	0x1035
+#define PCI_DEVICE_ID_SIIG_2S1P_10x_850	0x1036
+#define PCI_DEVICE_ID_SIIG_4S_10x_550	0x1050
+#define PCI_DEVICE_ID_SIIG_4S_10x_650	0x1051
+#define PCI_DEVICE_ID_SIIG_4S_10x_850	0x1052
+#define PCI_DEVICE_ID_SIIG_1S_20x_550	0x2000
+#define PCI_DEVICE_ID_SIIG_1S_20x_650	0x2001
+#define PCI_DEVICE_ID_SIIG_1S_20x_850	0x2002
+#define PCI_DEVICE_ID_SIIG_1P_20x	0x2020
+#define PCI_DEVICE_ID_SIIG_2P_20x	0x2021
+#define PCI_DEVICE_ID_SIIG_2S_20x_550	0x2030
+#define PCI_DEVICE_ID_SIIG_2S_20x_650	0x2031
+#define PCI_DEVICE_ID_SIIG_2S_20x_850	0x2032
+#define PCI_DEVICE_ID_SIIG_2P1S_20x_550	0x2040
+#define PCI_DEVICE_ID_SIIG_2P1S_20x_650	0x2041
+#define PCI_DEVICE_ID_SIIG_2P1S_20x_850	0x2042
+#define PCI_DEVICE_ID_SIIG_1S1P_20x_550	0x2010
+#define PCI_DEVICE_ID_SIIG_1S1P_20x_650	0x2011
+#define PCI_DEVICE_ID_SIIG_1S1P_20x_850	0x2012
+#define PCI_DEVICE_ID_SIIG_4S_20x_550	0x2050
+#define PCI_DEVICE_ID_SIIG_4S_20x_650	0x2051
+#define PCI_DEVICE_ID_SIIG_4S_20x_850	0x2052
+#define PCI_DEVICE_ID_SIIG_2S1P_20x_550	0x2060
+#define PCI_DEVICE_ID_SIIG_2S1P_20x_650	0x2061
+#define PCI_DEVICE_ID_SIIG_2S1P_20x_850	0x2062
+#define PCI_DEVICE_ID_SIIG_8S_20x_550	0x2080
+#define PCI_DEVICE_ID_SIIG_8S_20x_650	0x2081
+#define PCI_DEVICE_ID_SIIG_8S_20x_850	0x2082
+#define PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL	0x2050
+#define PCI_SUBDEVICE_ID_SIIG_DUAL_SERIAL	0x2530
+
+#define PCI_VENDOR_ID_RADISYS		0x1331
+
+#define PCI_VENDOR_ID_MICRO_MEMORY		0x1332
+#define PCI_DEVICE_ID_MICRO_MEMORY_5415CN	0x5415
+#define PCI_DEVICE_ID_MICRO_MEMORY_5425CN	0x5425
+#define PCI_DEVICE_ID_MICRO_MEMORY_6155		0x6155
+
+#define PCI_VENDOR_ID_DOMEX		0x134a
+#define PCI_DEVICE_ID_DOMEX_DMX3191D	0x0001
+
+#define PCI_VENDOR_ID_INTASHIELD	0x135a
+#define PCI_DEVICE_ID_INTASHIELD_IS200	0x0d80
+#define PCI_DEVICE_ID_INTASHIELD_IS400	0x0dc0
+
+#define PCI_VENDOR_ID_QUATECH		0x135C
+#define PCI_DEVICE_ID_QUATECH_QSC100	0x0010
+#define PCI_DEVICE_ID_QUATECH_DSC100	0x0020
+#define PCI_DEVICE_ID_QUATECH_ESC100D	0x0050
+#define PCI_DEVICE_ID_QUATECH_ESC100M	0x0060
+#define PCI_DEVICE_ID_QUATECH_SPPXP_100 0x0278
+
+#define PCI_VENDOR_ID_SEALEVEL		0x135e
+#define PCI_DEVICE_ID_SEALEVEL_U530	0x7101
+#define PCI_DEVICE_ID_SEALEVEL_UCOMM2	0x7201
+#define PCI_DEVICE_ID_SEALEVEL_UCOMM422	0x7402
+#define PCI_DEVICE_ID_SEALEVEL_UCOMM232	0x7202
+#define PCI_DEVICE_ID_SEALEVEL_COMM4	0x7401
+#define PCI_DEVICE_ID_SEALEVEL_COMM8	0x7801
+#define PCI_DEVICE_ID_SEALEVEL_7803	0x7803
+#define PCI_DEVICE_ID_SEALEVEL_UCOMM8	0x7804
+
+#define PCI_VENDOR_ID_HYPERCOPE		0x1365
+#define PCI_DEVICE_ID_HYPERCOPE_PLX	0x9050
+#define PCI_SUBDEVICE_ID_HYPERCOPE_OLD_ERGO	0x0104
+#define PCI_SUBDEVICE_ID_HYPERCOPE_ERGO		0x0106
+#define PCI_SUBDEVICE_ID_HYPERCOPE_METRO	0x0107
+#define PCI_SUBDEVICE_ID_HYPERCOPE_CHAMP2	0x0108
+
+#define PCI_VENDOR_ID_DIGIGRAM		0x1369
+#define PCI_SUBDEVICE_ID_DIGIGRAM_LX6464ES_SERIAL_SUBSYSTEM	0xc001
+#define PCI_SUBDEVICE_ID_DIGIGRAM_LX6464ES_CAE_SERIAL_SUBSYSTEM	0xc002
+
+#define PCI_VENDOR_ID_KAWASAKI		0x136b
+#define PCI_DEVICE_ID_MCHIP_KL5A72002	0xff01
+
+#define PCI_VENDOR_ID_CNET		0x1371
+#define PCI_DEVICE_ID_CNET_GIGACARD	0x434e
+
+#define PCI_VENDOR_ID_LMC		0x1376
+#define PCI_DEVICE_ID_LMC_HSSI		0x0003
+#define PCI_DEVICE_ID_LMC_DS3		0x0004
+#define PCI_DEVICE_ID_LMC_SSI		0x0005
+#define PCI_DEVICE_ID_LMC_T1		0x0006
+
+#define PCI_VENDOR_ID_NETGEAR		0x1385
+#define PCI_DEVICE_ID_NETGEAR_GA620	0x620a
+
+#define PCI_VENDOR_ID_APPLICOM		0x1389
+#define PCI_DEVICE_ID_APPLICOM_PCIGENERIC 0x0001
+#define PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN 0x0002
+#define PCI_DEVICE_ID_APPLICOM_PCI2000PFB 0x0003
+
+#define PCI_VENDOR_ID_MOXA		0x1393
+#define PCI_DEVICE_ID_MOXA_RC7000	0x0001
+#define PCI_DEVICE_ID_MOXA_CP102	0x1020
+#define PCI_DEVICE_ID_MOXA_CP102UL	0x1021
+#define PCI_DEVICE_ID_MOXA_CP102U	0x1022
+#define PCI_DEVICE_ID_MOXA_C104		0x1040
+#define PCI_DEVICE_ID_MOXA_CP104U	0x1041
+#define PCI_DEVICE_ID_MOXA_CP104JU	0x1042
+#define PCI_DEVICE_ID_MOXA_CP104EL	0x1043
+#define PCI_DEVICE_ID_MOXA_CT114	0x1140
+#define PCI_DEVICE_ID_MOXA_CP114	0x1141
+#define PCI_DEVICE_ID_MOXA_CP118U	0x1180
+#define PCI_DEVICE_ID_MOXA_CP118EL	0x1181
+#define PCI_DEVICE_ID_MOXA_CP132	0x1320
+#define PCI_DEVICE_ID_MOXA_CP132U	0x1321
+#define PCI_DEVICE_ID_MOXA_CP134U	0x1340
+#define PCI_DEVICE_ID_MOXA_C168		0x1680
+#define PCI_DEVICE_ID_MOXA_CP168U	0x1681
+#define PCI_DEVICE_ID_MOXA_CP168EL	0x1682
+#define PCI_DEVICE_ID_MOXA_CP204J	0x2040
+#define PCI_DEVICE_ID_MOXA_C218		0x2180
+#define PCI_DEVICE_ID_MOXA_C320		0x3200
+
+#define PCI_VENDOR_ID_CCD		0x1397
+#define PCI_DEVICE_ID_CCD_HFC4S		0x08B4
+#define PCI_SUBDEVICE_ID_CCD_PMX2S	0x1234
+#define PCI_DEVICE_ID_CCD_HFC8S		0x16B8
+#define PCI_DEVICE_ID_CCD_2BD0		0x2bd0
+#define PCI_DEVICE_ID_CCD_HFCE1		0x30B1
+#define PCI_SUBDEVICE_ID_CCD_SPD4S	0x3136
+#define PCI_SUBDEVICE_ID_CCD_SPDE1	0x3137
+#define PCI_DEVICE_ID_CCD_B000		0xb000
+#define PCI_DEVICE_ID_CCD_B006		0xb006
+#define PCI_DEVICE_ID_CCD_B007		0xb007
+#define PCI_DEVICE_ID_CCD_B008		0xb008
+#define PCI_DEVICE_ID_CCD_B009		0xb009
+#define PCI_DEVICE_ID_CCD_B00A		0xb00a
+#define PCI_DEVICE_ID_CCD_B00B		0xb00b
+#define PCI_DEVICE_ID_CCD_B00C		0xb00c
+#define PCI_DEVICE_ID_CCD_B100		0xb100
+#define PCI_SUBDEVICE_ID_CCD_IOB4ST	0xB520
+#define PCI_SUBDEVICE_ID_CCD_IOB8STR	0xB521
+#define PCI_SUBDEVICE_ID_CCD_IOB8ST	0xB522
+#define PCI_SUBDEVICE_ID_CCD_IOB1E1	0xB523
+#define PCI_SUBDEVICE_ID_CCD_SWYX4S	0xB540
+#define PCI_SUBDEVICE_ID_CCD_JH4S20	0xB550
+#define PCI_SUBDEVICE_ID_CCD_IOB8ST_1	0xB552
+#define PCI_SUBDEVICE_ID_CCD_JHSE1	0xB553
+#define PCI_SUBDEVICE_ID_CCD_JH8S	0xB55B
+#define PCI_SUBDEVICE_ID_CCD_BN4S	0xB560
+#define PCI_SUBDEVICE_ID_CCD_BN8S	0xB562
+#define PCI_SUBDEVICE_ID_CCD_BNE1	0xB563
+#define PCI_SUBDEVICE_ID_CCD_BNE1D	0xB564
+#define PCI_SUBDEVICE_ID_CCD_BNE1DP	0xB565
+#define PCI_SUBDEVICE_ID_CCD_BN2S	0xB566
+#define PCI_SUBDEVICE_ID_CCD_BN1SM	0xB567
+#define PCI_SUBDEVICE_ID_CCD_BN4SM	0xB568
+#define PCI_SUBDEVICE_ID_CCD_BN2SM	0xB569
+#define PCI_SUBDEVICE_ID_CCD_BNE1M	0xB56A
+#define PCI_SUBDEVICE_ID_CCD_BN8SP	0xB56B
+#define PCI_SUBDEVICE_ID_CCD_HFC4S	0xB620
+#define PCI_SUBDEVICE_ID_CCD_HFC8S	0xB622
+#define PCI_DEVICE_ID_CCD_B700		0xb700
+#define PCI_DEVICE_ID_CCD_B701		0xb701
+#define PCI_SUBDEVICE_ID_CCD_HFCE1	0xC523
+#define PCI_SUBDEVICE_ID_CCD_OV2S	0xE884
+#define PCI_SUBDEVICE_ID_CCD_OV4S	0xE888
+#define PCI_SUBDEVICE_ID_CCD_OV8S	0xE998
+
+#define PCI_VENDOR_ID_EXAR		0x13a8
+#define PCI_DEVICE_ID_EXAR_XR17C152	0x0152
+#define PCI_DEVICE_ID_EXAR_XR17C154	0x0154
+#define PCI_DEVICE_ID_EXAR_XR17C158	0x0158
+
+#define PCI_VENDOR_ID_MICROGATE		0x13c0
+#define PCI_DEVICE_ID_MICROGATE_USC	0x0010
+#define PCI_DEVICE_ID_MICROGATE_SCA	0x0030
+
+#define PCI_VENDOR_ID_3WARE		0x13C1
+#define PCI_DEVICE_ID_3WARE_1000	0x1000
+#define PCI_DEVICE_ID_3WARE_7000	0x1001
+#define PCI_DEVICE_ID_3WARE_9000	0x1002
+
+#define PCI_VENDOR_ID_IOMEGA		0x13ca
+#define PCI_DEVICE_ID_IOMEGA_BUZ	0x4231
+
+#define PCI_VENDOR_ID_ABOCOM		0x13D1
+#define PCI_DEVICE_ID_ABOCOM_2BD1       0x2BD1
+
+#define PCI_VENDOR_ID_SUNDANCE		0x13f0
+
+#define PCI_VENDOR_ID_CMEDIA		0x13f6
+#define PCI_DEVICE_ID_CMEDIA_CM8338A	0x0100
+#define PCI_DEVICE_ID_CMEDIA_CM8338B	0x0101
+#define PCI_DEVICE_ID_CMEDIA_CM8738	0x0111
+#define PCI_DEVICE_ID_CMEDIA_CM8738B	0x0112
+
+#define PCI_VENDOR_ID_LAVA		0x1407
+#define PCI_DEVICE_ID_LAVA_DSERIAL	0x0100 /* 2x 16550 */
+#define PCI_DEVICE_ID_LAVA_QUATRO_A	0x0101 /* 2x 16550, half of 4 port */
+#define PCI_DEVICE_ID_LAVA_QUATRO_B	0x0102 /* 2x 16550, half of 4 port */
+#define PCI_DEVICE_ID_LAVA_QUATTRO_A	0x0120 /* 2x 16550A, half of 4 port */
+#define PCI_DEVICE_ID_LAVA_QUATTRO_B	0x0121 /* 2x 16550A, half of 4 port */
+#define PCI_DEVICE_ID_LAVA_OCTO_A	0x0180 /* 4x 16550A, half of 8 port */
+#define PCI_DEVICE_ID_LAVA_OCTO_B	0x0181 /* 4x 16550A, half of 8 port */
+#define PCI_DEVICE_ID_LAVA_PORT_PLUS	0x0200 /* 2x 16650 */
+#define PCI_DEVICE_ID_LAVA_QUAD_A	0x0201 /* 2x 16650, half of 4 port */
+#define PCI_DEVICE_ID_LAVA_QUAD_B	0x0202 /* 2x 16650, half of 4 port */
+#define PCI_DEVICE_ID_LAVA_SSERIAL	0x0500 /* 1x 16550 */
+#define PCI_DEVICE_ID_LAVA_PORT_650	0x0600 /* 1x 16650 */
+#define PCI_DEVICE_ID_LAVA_PARALLEL	0x8000
+#define PCI_DEVICE_ID_LAVA_DUAL_PAR_A	0x8002 /* The Lava Dual Parallel is */
+#define PCI_DEVICE_ID_LAVA_DUAL_PAR_B	0x8003 /* two PCI devices on a card */
+#define PCI_DEVICE_ID_LAVA_BOCA_IOPPAR	0x8800
+
+#define PCI_VENDOR_ID_TIMEDIA		0x1409
+#define PCI_DEVICE_ID_TIMEDIA_1889	0x7168
+
+#define PCI_VENDOR_ID_ICE		0x1412
+#define PCI_DEVICE_ID_ICE_1712		0x1712
+#define PCI_DEVICE_ID_VT1724		0x1724
+
+#define PCI_VENDOR_ID_OXSEMI		0x1415
+#define PCI_DEVICE_ID_OXSEMI_12PCI840	0x8403
+#define PCI_DEVICE_ID_OXSEMI_PCIe840		0xC000
+#define PCI_DEVICE_ID_OXSEMI_PCIe840_G		0xC004
+#define PCI_DEVICE_ID_OXSEMI_PCIe952_0		0xC100
+#define PCI_DEVICE_ID_OXSEMI_PCIe952_0_G	0xC104
+#define PCI_DEVICE_ID_OXSEMI_PCIe952_1		0xC110
+#define PCI_DEVICE_ID_OXSEMI_PCIe952_1_G	0xC114
+#define PCI_DEVICE_ID_OXSEMI_PCIe952_1_U	0xC118
+#define PCI_DEVICE_ID_OXSEMI_PCIe952_1_GU	0xC11C
+#define PCI_DEVICE_ID_OXSEMI_16PCI954	0x9501
+#define PCI_DEVICE_ID_OXSEMI_C950	0x950B
+#define PCI_DEVICE_ID_OXSEMI_16PCI95N	0x9511
+#define PCI_DEVICE_ID_OXSEMI_16PCI954PP	0x9513
+#define PCI_DEVICE_ID_OXSEMI_16PCI952	0x9521
+#define PCI_DEVICE_ID_OXSEMI_16PCI952PP	0x9523
+#define PCI_SUBDEVICE_ID_OXSEMI_C950	0x0001
+
+#define PCI_VENDOR_ID_CHELSIO		0x1425
+
+#define PCI_VENDOR_ID_SAMSUNG		0x144d
+
+#define PCI_VENDOR_ID_GIGABYTE		0x1458
+
+#define PCI_VENDOR_ID_AMBIT		0x1468
+
+#define PCI_VENDOR_ID_MYRICOM		0x14c1
+
+#define PCI_VENDOR_ID_TITAN		0x14D2
+#define PCI_DEVICE_ID_TITAN_010L	0x8001
+#define PCI_DEVICE_ID_TITAN_100L	0x8010
+#define PCI_DEVICE_ID_TITAN_110L	0x8011
+#define PCI_DEVICE_ID_TITAN_200L	0x8020
+#define PCI_DEVICE_ID_TITAN_210L	0x8021
+#define PCI_DEVICE_ID_TITAN_400L	0x8040
+#define PCI_DEVICE_ID_TITAN_800L	0x8080
+#define PCI_DEVICE_ID_TITAN_100		0xA001
+#define PCI_DEVICE_ID_TITAN_200		0xA005
+#define PCI_DEVICE_ID_TITAN_400		0xA003
+#define PCI_DEVICE_ID_TITAN_800B	0xA004
+
+#define PCI_VENDOR_ID_PANACOM		0x14d4
+#define PCI_DEVICE_ID_PANACOM_QUADMODEM	0x0400
+#define PCI_DEVICE_ID_PANACOM_DUALMODEM	0x0402
+
+#define PCI_VENDOR_ID_SIPACKETS		0x14d9
+#define PCI_DEVICE_ID_SP1011		0x0010
+
+#define PCI_VENDOR_ID_AFAVLAB		0x14db
+#define PCI_DEVICE_ID_AFAVLAB_P028	0x2180
+#define PCI_DEVICE_ID_AFAVLAB_P030	0x2182
+#define PCI_SUBDEVICE_ID_AFAVLAB_P061		0x2150
+
+#define PCI_VENDOR_ID_BCM_GVC          0x14a4
+#define PCI_VENDOR_ID_BROADCOM		0x14e4
+#define PCI_DEVICE_ID_TIGON3_5752	0x1600
+#define PCI_DEVICE_ID_TIGON3_5752M	0x1601
+#define PCI_DEVICE_ID_NX2_5709		0x1639
+#define PCI_DEVICE_ID_NX2_5709S		0x163a
+#define PCI_DEVICE_ID_TIGON3_5700	0x1644
+#define PCI_DEVICE_ID_TIGON3_5701	0x1645
+#define PCI_DEVICE_ID_TIGON3_5702	0x1646
+#define PCI_DEVICE_ID_TIGON3_5703	0x1647
+#define PCI_DEVICE_ID_TIGON3_5704	0x1648
+#define PCI_DEVICE_ID_TIGON3_5704S_2	0x1649
+#define PCI_DEVICE_ID_NX2_5706		0x164a
+#define PCI_DEVICE_ID_NX2_5708		0x164c
+#define PCI_DEVICE_ID_TIGON3_5702FE	0x164d
+#define PCI_DEVICE_ID_NX2_57710		0x164e
+#define PCI_DEVICE_ID_NX2_57711		0x164f
+#define PCI_DEVICE_ID_NX2_57711E	0x1650
+#define PCI_DEVICE_ID_TIGON3_5705	0x1653
+#define PCI_DEVICE_ID_TIGON3_5705_2	0x1654
+#define PCI_DEVICE_ID_TIGON3_5719	0x1657
+#define PCI_DEVICE_ID_TIGON3_5721	0x1659
+#define PCI_DEVICE_ID_TIGON3_5722	0x165a
+#define PCI_DEVICE_ID_TIGON3_5723	0x165b
+#define PCI_DEVICE_ID_TIGON3_5705M	0x165d
+#define PCI_DEVICE_ID_TIGON3_5705M_2	0x165e
+#define PCI_DEVICE_ID_NX2_57712		0x1662
+#define PCI_DEVICE_ID_NX2_57712E	0x1663
+#define PCI_DEVICE_ID_TIGON3_5714	0x1668
+#define PCI_DEVICE_ID_TIGON3_5714S	0x1669
+#define PCI_DEVICE_ID_TIGON3_5780	0x166a
+#define PCI_DEVICE_ID_TIGON3_5780S	0x166b
+#define PCI_DEVICE_ID_TIGON3_5705F	0x166e
+#define PCI_DEVICE_ID_TIGON3_5754M	0x1672
+#define PCI_DEVICE_ID_TIGON3_5755M	0x1673
+#define PCI_DEVICE_ID_TIGON3_5756	0x1674
+#define PCI_DEVICE_ID_TIGON3_5751	0x1677
+#define PCI_DEVICE_ID_TIGON3_5715	0x1678
+#define PCI_DEVICE_ID_TIGON3_5715S	0x1679
+#define PCI_DEVICE_ID_TIGON3_5754	0x167a
+#define PCI_DEVICE_ID_TIGON3_5755	0x167b
+#define PCI_DEVICE_ID_TIGON3_5751M	0x167d
+#define PCI_DEVICE_ID_TIGON3_5751F	0x167e
+#define PCI_DEVICE_ID_TIGON3_5787F	0x167f
+#define PCI_DEVICE_ID_TIGON3_5761E	0x1680
+#define PCI_DEVICE_ID_TIGON3_5761	0x1681
+#define PCI_DEVICE_ID_TIGON3_5764	0x1684
+#define PCI_DEVICE_ID_NX2_57800		0x168a
+#define PCI_DEVICE_ID_NX2_57840		0x168d
+#define PCI_DEVICE_ID_NX2_57810		0x168e
+#define PCI_DEVICE_ID_TIGON3_5787M	0x1693
+#define PCI_DEVICE_ID_TIGON3_5782	0x1696
+#define PCI_DEVICE_ID_TIGON3_5784	0x1698
+#define PCI_DEVICE_ID_TIGON3_5786	0x169a
+#define PCI_DEVICE_ID_TIGON3_5787	0x169b
+#define PCI_DEVICE_ID_TIGON3_5788	0x169c
+#define PCI_DEVICE_ID_TIGON3_5789	0x169d
+#define PCI_DEVICE_ID_NX2_57800_MF	0x16a5
+#define PCI_DEVICE_ID_TIGON3_5702X	0x16a6
+#define PCI_DEVICE_ID_TIGON3_5703X	0x16a7
+#define PCI_DEVICE_ID_TIGON3_5704S	0x16a8
+#define PCI_DEVICE_ID_NX2_57800_VF	0x16a9
+#define PCI_DEVICE_ID_NX2_5706S		0x16aa
+#define PCI_DEVICE_ID_NX2_57840_MF	0x16ab
+#define PCI_DEVICE_ID_NX2_5708S		0x16ac
+#define PCI_DEVICE_ID_NX2_57840_VF	0x16ad
+#define PCI_DEVICE_ID_NX2_57810_MF	0x16ae
+#define PCI_DEVICE_ID_NX2_57810_VF	0x16af
+#define PCI_DEVICE_ID_TIGON3_5702A3	0x16c6
+#define PCI_DEVICE_ID_TIGON3_5703A3	0x16c7
+#define PCI_DEVICE_ID_TIGON3_5781	0x16dd
+#define PCI_DEVICE_ID_TIGON3_5753	0x16f7
+#define PCI_DEVICE_ID_TIGON3_5753M	0x16fd
+#define PCI_DEVICE_ID_TIGON3_5753F	0x16fe
+#define PCI_DEVICE_ID_TIGON3_5901	0x170d
+#define PCI_DEVICE_ID_BCM4401B1		0x170c
+#define PCI_DEVICE_ID_TIGON3_5901_2	0x170e
+#define PCI_DEVICE_ID_TIGON3_5906	0x1712
+#define PCI_DEVICE_ID_TIGON3_5906M	0x1713
+#define PCI_DEVICE_ID_BCM4401		0x4401
+#define PCI_DEVICE_ID_BCM4401B0		0x4402
+
+#define PCI_VENDOR_ID_TOPIC		0x151f
+#define PCI_DEVICE_ID_TOPIC_TP560	0x0000
+
+#define PCI_VENDOR_ID_MAINPINE		0x1522
+#define PCI_DEVICE_ID_MAINPINE_PBRIDGE	0x0100
+#define PCI_VENDOR_ID_ENE		0x1524
+#define PCI_DEVICE_ID_ENE_CB710_FLASH	0x0510
+#define PCI_DEVICE_ID_ENE_CB712_SD	0x0550
+#define PCI_DEVICE_ID_ENE_CB712_SD_2	0x0551
+#define PCI_DEVICE_ID_ENE_CB714_SD	0x0750
+#define PCI_DEVICE_ID_ENE_CB714_SD_2	0x0751
+#define PCI_DEVICE_ID_ENE_1211		0x1211
+#define PCI_DEVICE_ID_ENE_1225		0x1225
+#define PCI_DEVICE_ID_ENE_1410		0x1410
+#define PCI_DEVICE_ID_ENE_710		0x1411
+#define PCI_DEVICE_ID_ENE_712		0x1412
+#define PCI_DEVICE_ID_ENE_1420		0x1420
+#define PCI_DEVICE_ID_ENE_720		0x1421
+#define PCI_DEVICE_ID_ENE_722		0x1422
+
+#define PCI_SUBVENDOR_ID_PERLE          0x155f
+#define PCI_SUBDEVICE_ID_PCI_RAS4       0xf001
+#define PCI_SUBDEVICE_ID_PCI_RAS8       0xf010
+
+#define PCI_VENDOR_ID_SYBA		0x1592
+#define PCI_DEVICE_ID_SYBA_2P_EPP	0x0782
+#define PCI_DEVICE_ID_SYBA_1P_ECP	0x0783
+
+#define PCI_VENDOR_ID_MORETON		0x15aa
+#define PCI_DEVICE_ID_RASTEL_2PORT	0x2000
+
+#define PCI_VENDOR_ID_ZOLTRIX		0x15b0
+#define PCI_DEVICE_ID_ZOLTRIX_2BD0	0x2bd0
+
+#define PCI_VENDOR_ID_MELLANOX		0x15b3
+#define PCI_DEVICE_ID_MELLANOX_TAVOR	0x5a44
+#define PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE	0x5a46
+#define PCI_DEVICE_ID_MELLANOX_ARBEL_COMPAT 0x6278
+#define PCI_DEVICE_ID_MELLANOX_ARBEL	0x6282
+#define PCI_DEVICE_ID_MELLANOX_SINAI_OLD 0x5e8c
+#define PCI_DEVICE_ID_MELLANOX_SINAI	0x6274
+
+#define PCI_VENDOR_ID_DFI		0x15bd
+
+#define PCI_VENDOR_ID_QUICKNET		0x15e2
+#define PCI_DEVICE_ID_QUICKNET_XJ	0x0500
+
+/*
+ * ADDI-DATA GmbH communication cards <info@addi-data.com>
+ */
+#define PCI_VENDOR_ID_ADDIDATA_OLD             0x10E8
+#define PCI_VENDOR_ID_ADDIDATA                 0x15B8
+#define PCI_DEVICE_ID_ADDIDATA_APCI7500        0x7000
+#define PCI_DEVICE_ID_ADDIDATA_APCI7420        0x7001
+#define PCI_DEVICE_ID_ADDIDATA_APCI7300        0x7002
+#define PCI_DEVICE_ID_ADDIDATA_APCI7800        0x818E
+#define PCI_DEVICE_ID_ADDIDATA_APCI7500_2      0x7009
+#define PCI_DEVICE_ID_ADDIDATA_APCI7420_2      0x700A
+#define PCI_DEVICE_ID_ADDIDATA_APCI7300_2      0x700B
+#define PCI_DEVICE_ID_ADDIDATA_APCI7500_3      0x700C
+#define PCI_DEVICE_ID_ADDIDATA_APCI7420_3      0x700D
+#define PCI_DEVICE_ID_ADDIDATA_APCI7300_3      0x700E
+#define PCI_DEVICE_ID_ADDIDATA_APCI7800_3      0x700F
+#define PCI_DEVICE_ID_ADDIDATA_APCIe7300       0x7010
+#define PCI_DEVICE_ID_ADDIDATA_APCIe7420       0x7011
+#define PCI_DEVICE_ID_ADDIDATA_APCIe7500       0x7012
+#define PCI_DEVICE_ID_ADDIDATA_APCIe7800       0x7013
+
+#define PCI_VENDOR_ID_PDC		0x15e9
+
+#define PCI_VENDOR_ID_FARSITE           0x1619
+#define PCI_DEVICE_ID_FARSITE_T2P       0x0400
+#define PCI_DEVICE_ID_FARSITE_T4P       0x0440
+#define PCI_DEVICE_ID_FARSITE_T1U       0x0610
+#define PCI_DEVICE_ID_FARSITE_T2U       0x0620
+#define PCI_DEVICE_ID_FARSITE_T4U       0x0640
+#define PCI_DEVICE_ID_FARSITE_TE1       0x1610
+#define PCI_DEVICE_ID_FARSITE_TE1C      0x1612
+
+#define PCI_VENDOR_ID_ARIMA		0x161f
+
+#define PCI_VENDOR_ID_BROCADE		0x1657
+#define PCI_DEVICE_ID_BROCADE_CT	0x0014
+#define PCI_DEVICE_ID_BROCADE_FC_8G1P	0x0017
+#define PCI_DEVICE_ID_BROCADE_CT_FC	0x0021
+
+#define PCI_VENDOR_ID_SIBYTE		0x166d
+#define PCI_DEVICE_ID_BCM1250_PCI	0x0001
+#define PCI_DEVICE_ID_BCM1250_HT	0x0002
+
+#define PCI_VENDOR_ID_ATHEROS		0x168c
+
+#define PCI_VENDOR_ID_NETCELL		0x169c
+#define PCI_DEVICE_ID_REVOLUTION	0x0044
+
+#define PCI_VENDOR_ID_CENATEK		0x16CA
+#define PCI_DEVICE_ID_CENATEK_IDE	0x0001
+
+#define PCI_VENDOR_ID_VITESSE		0x1725
+#define PCI_DEVICE_ID_VITESSE_VSC7174	0x7174
+
+#define PCI_VENDOR_ID_LINKSYS		0x1737
+#define PCI_DEVICE_ID_LINKSYS_EG1064	0x1064
+
+#define PCI_VENDOR_ID_ALTIMA		0x173b
+#define PCI_DEVICE_ID_ALTIMA_AC1000	0x03e8
+#define PCI_DEVICE_ID_ALTIMA_AC1001	0x03e9
+#define PCI_DEVICE_ID_ALTIMA_AC9100	0x03ea
+#define PCI_DEVICE_ID_ALTIMA_AC1003	0x03eb
+
+#define PCI_VENDOR_ID_BELKIN		0x1799
+#define PCI_DEVICE_ID_BELKIN_F5D7010V7	0x701f
+
+#define PCI_VENDOR_ID_RDC		0x17f3
+#define PCI_DEVICE_ID_RDC_R6020		0x6020
+#define PCI_DEVICE_ID_RDC_R6030		0x6030
+#define PCI_DEVICE_ID_RDC_R6040		0x6040
+#define PCI_DEVICE_ID_RDC_R6060		0x6060
+#define PCI_DEVICE_ID_RDC_R6061		0x6061
+#define PCI_DEVICE_ID_RDC_D1010		0x1010
+
+#define PCI_VENDOR_ID_LENOVO		0x17aa
+
+#define PCI_VENDOR_ID_ARECA		0x17d3
+#define PCI_DEVICE_ID_ARECA_1110	0x1110
+#define PCI_DEVICE_ID_ARECA_1120	0x1120
+#define PCI_DEVICE_ID_ARECA_1130	0x1130
+#define PCI_DEVICE_ID_ARECA_1160	0x1160
+#define PCI_DEVICE_ID_ARECA_1170	0x1170
+#define PCI_DEVICE_ID_ARECA_1200	0x1200
+#define PCI_DEVICE_ID_ARECA_1201	0x1201
+#define PCI_DEVICE_ID_ARECA_1202	0x1202
+#define PCI_DEVICE_ID_ARECA_1210	0x1210
+#define PCI_DEVICE_ID_ARECA_1220	0x1220
+#define PCI_DEVICE_ID_ARECA_1230	0x1230
+#define PCI_DEVICE_ID_ARECA_1260	0x1260
+#define PCI_DEVICE_ID_ARECA_1270	0x1270
+#define PCI_DEVICE_ID_ARECA_1280	0x1280
+#define PCI_DEVICE_ID_ARECA_1380	0x1380
+#define PCI_DEVICE_ID_ARECA_1381	0x1381
+#define PCI_DEVICE_ID_ARECA_1680	0x1680
+#define PCI_DEVICE_ID_ARECA_1681	0x1681
+
+#define PCI_VENDOR_ID_S2IO		0x17d5
+#define	PCI_DEVICE_ID_S2IO_WIN		0x5731
+#define	PCI_DEVICE_ID_S2IO_UNI		0x5831
+#define PCI_DEVICE_ID_HERC_WIN		0x5732
+#define PCI_DEVICE_ID_HERC_UNI		0x5832
+
+#define PCI_VENDOR_ID_SITECOM		0x182d
+#define PCI_DEVICE_ID_SITECOM_DC105V2	0x3069
+
+#define PCI_VENDOR_ID_TOPSPIN		0x1867
+
+#define PCI_VENDOR_ID_SILAN		0x1904
+
+#define PCI_VENDOR_ID_RENESAS		0x1912
+#define PCI_DEVICE_ID_RENESAS_SH7781	0x0001
+#define PCI_DEVICE_ID_RENESAS_SH7780	0x0002
+#define PCI_DEVICE_ID_RENESAS_SH7763	0x0004
+#define PCI_DEVICE_ID_RENESAS_SH7785	0x0007
+#define PCI_DEVICE_ID_RENESAS_SH7786	0x0010
+
+#define PCI_VENDOR_ID_SOLARFLARE	0x1924
+#define PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0	0x0703
+#define PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1	0x6703
+#define PCI_DEVICE_ID_SOLARFLARE_SFC4000B	0x0710
+
+#define PCI_VENDOR_ID_TDI               0x192E
+#define PCI_DEVICE_ID_TDI_EHCI          0x0101
+
+#define PCI_VENDOR_ID_FREESCALE		0x1957
+#define PCI_DEVICE_ID_MPC8308		0xc006
+#define PCI_DEVICE_ID_MPC8315E		0x00b4
+#define PCI_DEVICE_ID_MPC8315		0x00b5
+#define PCI_DEVICE_ID_MPC8314E		0x00b6
+#define PCI_DEVICE_ID_MPC8314		0x00b7
+#define PCI_DEVICE_ID_MPC8378E		0x00c4
+#define PCI_DEVICE_ID_MPC8378		0x00c5
+#define PCI_DEVICE_ID_MPC8377E		0x00c6
+#define PCI_DEVICE_ID_MPC8377		0x00c7
+#define PCI_DEVICE_ID_MPC8548E		0x0012
+#define PCI_DEVICE_ID_MPC8548		0x0013
+#define PCI_DEVICE_ID_MPC8543E		0x0014
+#define PCI_DEVICE_ID_MPC8543		0x0015
+#define PCI_DEVICE_ID_MPC8547E		0x0018
+#define PCI_DEVICE_ID_MPC8545E		0x0019
+#define PCI_DEVICE_ID_MPC8545		0x001a
+#define PCI_DEVICE_ID_MPC8569E		0x0061
+#define PCI_DEVICE_ID_MPC8569		0x0060
+#define PCI_DEVICE_ID_MPC8568E		0x0020
+#define PCI_DEVICE_ID_MPC8568		0x0021
+#define PCI_DEVICE_ID_MPC8567E		0x0022
+#define PCI_DEVICE_ID_MPC8567		0x0023
+#define PCI_DEVICE_ID_MPC8533E		0x0030
+#define PCI_DEVICE_ID_MPC8533		0x0031
+#define PCI_DEVICE_ID_MPC8544E		0x0032
+#define PCI_DEVICE_ID_MPC8544		0x0033
+#define PCI_DEVICE_ID_MPC8572E		0x0040
+#define PCI_DEVICE_ID_MPC8572		0x0041
+#define PCI_DEVICE_ID_MPC8536E		0x0050
+#define PCI_DEVICE_ID_MPC8536		0x0051
+#define PCI_DEVICE_ID_P2020E		0x0070
+#define PCI_DEVICE_ID_P2020		0x0071
+#define PCI_DEVICE_ID_P2010E		0x0078
+#define PCI_DEVICE_ID_P2010		0x0079
+#define PCI_DEVICE_ID_P1020E		0x0100
+#define PCI_DEVICE_ID_P1020		0x0101
+#define PCI_DEVICE_ID_P1021E		0x0102
+#define PCI_DEVICE_ID_P1021		0x0103
+#define PCI_DEVICE_ID_P1011E		0x0108
+#define PCI_DEVICE_ID_P1011		0x0109
+#define PCI_DEVICE_ID_P1022E		0x0110
+#define PCI_DEVICE_ID_P1022		0x0111
+#define PCI_DEVICE_ID_P1013E		0x0118
+#define PCI_DEVICE_ID_P1013		0x0119
+#define PCI_DEVICE_ID_P4080E		0x0400
+#define PCI_DEVICE_ID_P4080		0x0401
+#define PCI_DEVICE_ID_P4040E		0x0408
+#define PCI_DEVICE_ID_P4040		0x0409
+#define PCI_DEVICE_ID_P2040E		0x0410
+#define PCI_DEVICE_ID_P2040		0x0411
+#define PCI_DEVICE_ID_P3041E		0x041E
+#define PCI_DEVICE_ID_P3041		0x041F
+#define PCI_DEVICE_ID_P5020E		0x0420
+#define PCI_DEVICE_ID_P5020		0x0421
+#define PCI_DEVICE_ID_P5010E		0x0428
+#define PCI_DEVICE_ID_P5010		0x0429
+#define PCI_DEVICE_ID_MPC8641		0x7010
+#define PCI_DEVICE_ID_MPC8641D		0x7011
+#define PCI_DEVICE_ID_MPC8610		0x7018
+
+#define PCI_VENDOR_ID_PASEMI		0x1959
+
+#define PCI_VENDOR_ID_ATTANSIC		0x1969
+#define PCI_DEVICE_ID_ATTANSIC_L1	0x1048
+#define PCI_DEVICE_ID_ATTANSIC_L2	0x2048
+
+#define PCI_VENDOR_ID_JMICRON		0x197B
+#define PCI_DEVICE_ID_JMICRON_JMB360	0x2360
+#define PCI_DEVICE_ID_JMICRON_JMB361	0x2361
+#define PCI_DEVICE_ID_JMICRON_JMB362	0x2362
+#define PCI_DEVICE_ID_JMICRON_JMB363	0x2363
+#define PCI_DEVICE_ID_JMICRON_JMB364	0x2364
+#define PCI_DEVICE_ID_JMICRON_JMB365	0x2365
+#define PCI_DEVICE_ID_JMICRON_JMB366	0x2366
+#define PCI_DEVICE_ID_JMICRON_JMB368	0x2368
+#define PCI_DEVICE_ID_JMICRON_JMB369	0x2369
+#define PCI_DEVICE_ID_JMICRON_JMB38X_SD	0x2381
+#define PCI_DEVICE_ID_JMICRON_JMB38X_MMC 0x2382
+#define PCI_DEVICE_ID_JMICRON_JMB38X_MS	0x2383
+#define PCI_DEVICE_ID_JMICRON_JMB385_MS	0x2388
+#define PCI_DEVICE_ID_JMICRON_JMB388_SD	0x2391
+#define PCI_DEVICE_ID_JMICRON_JMB388_ESD 0x2392
+#define PCI_DEVICE_ID_JMICRON_JMB390_MS	0x2393
+
+#define PCI_VENDOR_ID_KORENIX		0x1982
+#define PCI_DEVICE_ID_KORENIX_JETCARDF0	0x1600
+#define PCI_DEVICE_ID_KORENIX_JETCARDF1	0x16ff
+#define PCI_DEVICE_ID_KORENIX_JETCARDF2	0x1700
+#define PCI_DEVICE_ID_KORENIX_JETCARDF3	0x17ff
+
+#define PCI_VENDOR_ID_QMI		0x1a32
+
+#define PCI_VENDOR_ID_AZWAVE		0x1a3b
+
+#define PCI_VENDOR_ID_ASMEDIA		0x1b21
+
+#define PCI_VENDOR_ID_TEKRAM		0x1de1
+#define PCI_DEVICE_ID_TEKRAM_DC290	0xdc29
+
+#define PCI_VENDOR_ID_TEHUTI		0x1fc9
+#define PCI_DEVICE_ID_TEHUTI_3009	0x3009
+#define PCI_DEVICE_ID_TEHUTI_3010	0x3010
+#define PCI_DEVICE_ID_TEHUTI_3014	0x3014
+
+#define PCI_VENDOR_ID_HINT             0x3388
+#define PCI_DEVICE_ID_HINT_VXPROII_IDE 0x8013
+
+#define PCI_VENDOR_ID_3DLABS		0x3d3d
+#define PCI_DEVICE_ID_3DLABS_PERMEDIA2	0x0007
+#define PCI_DEVICE_ID_3DLABS_PERMEDIA2V	0x0009
+
+#define PCI_VENDOR_ID_NETXEN		0x4040
+#define PCI_DEVICE_ID_NX2031_10GXSR	0x0001
+#define PCI_DEVICE_ID_NX2031_10GCX4	0x0002
+#define PCI_DEVICE_ID_NX2031_4GCU	0x0003
+#define PCI_DEVICE_ID_NX2031_IMEZ	0x0004
+#define PCI_DEVICE_ID_NX2031_HMEZ	0x0005
+#define PCI_DEVICE_ID_NX2031_XG_MGMT	0x0024
+#define PCI_DEVICE_ID_NX2031_XG_MGMT2	0x0025
+#define PCI_DEVICE_ID_NX3031		0x0100
+
+#define PCI_VENDOR_ID_AKS		0x416c
+#define PCI_DEVICE_ID_AKS_ALADDINCARD	0x0100
+
+#define PCI_VENDOR_ID_ACCESSIO		0x494f
+#define PCI_DEVICE_ID_ACCESSIO_WDG_CSM	0x22c0
+
+#define PCI_VENDOR_ID_S3		0x5333
+#define PCI_DEVICE_ID_S3_TRIO		0x8811
+#define PCI_DEVICE_ID_S3_868		0x8880
+#define PCI_DEVICE_ID_S3_968		0x88f0
+#define PCI_DEVICE_ID_S3_SAVAGE4	0x8a25
+#define PCI_DEVICE_ID_S3_PROSAVAGE8	0x8d04
+#define PCI_DEVICE_ID_S3_SONICVIBES	0xca00
+
+#define PCI_VENDOR_ID_DUNORD		0x5544
+#define PCI_DEVICE_ID_DUNORD_I3000	0x0001
+
+#define PCI_VENDOR_ID_DCI		0x6666
+#define PCI_DEVICE_ID_DCI_PCCOM4	0x0001
+#define PCI_DEVICE_ID_DCI_PCCOM8	0x0002
+#define PCI_DEVICE_ID_DCI_PCCOM2	0x0004
+
+#define PCI_VENDOR_ID_INTEL		0x8086
+#define PCI_DEVICE_ID_INTEL_EESSC	0x0008
+#define PCI_DEVICE_ID_INTEL_PXHD_0	0x0320
+#define PCI_DEVICE_ID_INTEL_PXHD_1	0x0321
+#define PCI_DEVICE_ID_INTEL_PXH_0	0x0329
+#define PCI_DEVICE_ID_INTEL_PXH_1	0x032A
+#define PCI_DEVICE_ID_INTEL_PXHV	0x032C
+#define PCI_DEVICE_ID_INTEL_80332_0	0x0330
+#define PCI_DEVICE_ID_INTEL_80332_1	0x0332
+#define PCI_DEVICE_ID_INTEL_80333_0	0x0370
+#define PCI_DEVICE_ID_INTEL_80333_1	0x0372
+#define PCI_DEVICE_ID_INTEL_82375	0x0482
+#define PCI_DEVICE_ID_INTEL_82424	0x0483
+#define PCI_DEVICE_ID_INTEL_82378	0x0484
+#define PCI_DEVICE_ID_INTEL_MRST_SD0	0x0807
+#define PCI_DEVICE_ID_INTEL_MRST_SD1	0x0808
+#define PCI_DEVICE_ID_INTEL_MFD_SD	0x0820
+#define PCI_DEVICE_ID_INTEL_MFD_SDIO1	0x0821
+#define PCI_DEVICE_ID_INTEL_MFD_SDIO2	0x0822
+#define PCI_DEVICE_ID_INTEL_MFD_EMMC0	0x0823
+#define PCI_DEVICE_ID_INTEL_MFD_EMMC1	0x0824
+#define PCI_DEVICE_ID_INTEL_MRST_SD2	0x084F
+#define PCI_DEVICE_ID_INTEL_I960	0x0960
+#define PCI_DEVICE_ID_INTEL_I960RM	0x0962
+#define PCI_DEVICE_ID_INTEL_8257X_SOL	0x1062
+#define PCI_DEVICE_ID_INTEL_82573E_SOL	0x1085
+#define PCI_DEVICE_ID_INTEL_82573L_SOL	0x108F
+#define PCI_DEVICE_ID_INTEL_82815_MC	0x1130
+#define PCI_DEVICE_ID_INTEL_82815_CGC	0x1132
+#define PCI_DEVICE_ID_INTEL_82092AA_0	0x1221
+#define PCI_DEVICE_ID_INTEL_7505_0	0x2550
+#define PCI_DEVICE_ID_INTEL_7205_0	0x255d
+#define PCI_DEVICE_ID_INTEL_82437	0x122d
+#define PCI_DEVICE_ID_INTEL_82371FB_0	0x122e
+#define PCI_DEVICE_ID_INTEL_82371FB_1	0x1230
+#define PCI_DEVICE_ID_INTEL_82371MX	0x1234
+#define PCI_DEVICE_ID_INTEL_82441	0x1237
+#define PCI_DEVICE_ID_INTEL_82380FB	0x124b
+#define PCI_DEVICE_ID_INTEL_82439	0x1250
+#define PCI_DEVICE_ID_INTEL_80960_RP	0x1960
+#define PCI_DEVICE_ID_INTEL_82840_HB	0x1a21
+#define PCI_DEVICE_ID_INTEL_82845_HB	0x1a30
+#define PCI_DEVICE_ID_INTEL_IOAT	0x1a38
+#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN	0x1c41
+#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX	0x1c5f
+#define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_0	0x1d40
+#define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_1	0x1d41
+#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI	0x1e31
+#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN	0x1e40
+#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX	0x1e5f
+#define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MIN	0x2310
+#define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MAX	0x231f
+#define PCI_DEVICE_ID_INTEL_82801AA_0	0x2410
+#define PCI_DEVICE_ID_INTEL_82801AA_1	0x2411
+#define PCI_DEVICE_ID_INTEL_82801AA_3	0x2413
+#define PCI_DEVICE_ID_INTEL_82801AA_5	0x2415
+#define PCI_DEVICE_ID_INTEL_82801AA_6	0x2416
+#define PCI_DEVICE_ID_INTEL_82801AA_8	0x2418
+#define PCI_DEVICE_ID_INTEL_82801AB_0	0x2420
+#define PCI_DEVICE_ID_INTEL_82801AB_1	0x2421
+#define PCI_DEVICE_ID_INTEL_82801AB_3	0x2423
+#define PCI_DEVICE_ID_INTEL_82801AB_5	0x2425
+#define PCI_DEVICE_ID_INTEL_82801AB_6	0x2426
+#define PCI_DEVICE_ID_INTEL_82801AB_8	0x2428
+#define PCI_DEVICE_ID_INTEL_82801BA_0	0x2440
+#define PCI_DEVICE_ID_INTEL_82801BA_2	0x2443
+#define PCI_DEVICE_ID_INTEL_82801BA_4	0x2445
+#define PCI_DEVICE_ID_INTEL_82801BA_6	0x2448
+#define PCI_DEVICE_ID_INTEL_82801BA_8	0x244a
+#define PCI_DEVICE_ID_INTEL_82801BA_9	0x244b
+#define PCI_DEVICE_ID_INTEL_82801BA_10	0x244c
+#define PCI_DEVICE_ID_INTEL_82801BA_11	0x244e
+#define PCI_DEVICE_ID_INTEL_82801E_0	0x2450
+#define PCI_DEVICE_ID_INTEL_82801E_11	0x245b
+#define PCI_DEVICE_ID_INTEL_82801CA_0	0x2480
+#define PCI_DEVICE_ID_INTEL_82801CA_3	0x2483
+#define PCI_DEVICE_ID_INTEL_82801CA_5	0x2485
+#define PCI_DEVICE_ID_INTEL_82801CA_6	0x2486
+#define PCI_DEVICE_ID_INTEL_82801CA_10	0x248a
+#define PCI_DEVICE_ID_INTEL_82801CA_11	0x248b
+#define PCI_DEVICE_ID_INTEL_82801CA_12	0x248c
+#define PCI_DEVICE_ID_INTEL_82801DB_0	0x24c0
+#define PCI_DEVICE_ID_INTEL_82801DB_1	0x24c1
+#define PCI_DEVICE_ID_INTEL_82801DB_2	0x24c2
+#define PCI_DEVICE_ID_INTEL_82801DB_3	0x24c3
+#define PCI_DEVICE_ID_INTEL_82801DB_5	0x24c5
+#define PCI_DEVICE_ID_INTEL_82801DB_6	0x24c6
+#define PCI_DEVICE_ID_INTEL_82801DB_9	0x24c9
+#define PCI_DEVICE_ID_INTEL_82801DB_10	0x24ca
+#define PCI_DEVICE_ID_INTEL_82801DB_11	0x24cb
+#define PCI_DEVICE_ID_INTEL_82801DB_12  0x24cc
+#define PCI_DEVICE_ID_INTEL_82801EB_0	0x24d0
+#define PCI_DEVICE_ID_INTEL_82801EB_1	0x24d1
+#define PCI_DEVICE_ID_INTEL_82801EB_3	0x24d3
+#define PCI_DEVICE_ID_INTEL_82801EB_5	0x24d5
+#define PCI_DEVICE_ID_INTEL_82801EB_6	0x24d6
+#define PCI_DEVICE_ID_INTEL_82801EB_11	0x24db
+#define PCI_DEVICE_ID_INTEL_82801EB_12	0x24dc
+#define PCI_DEVICE_ID_INTEL_82801EB_13	0x24dd
+#define PCI_DEVICE_ID_INTEL_ESB_1	0x25a1
+#define PCI_DEVICE_ID_INTEL_ESB_2	0x25a2
+#define PCI_DEVICE_ID_INTEL_ESB_4	0x25a4
+#define PCI_DEVICE_ID_INTEL_ESB_5	0x25a6
+#define PCI_DEVICE_ID_INTEL_ESB_9	0x25ab
+#define PCI_DEVICE_ID_INTEL_ESB_10	0x25ac
+#define PCI_DEVICE_ID_INTEL_82820_HB	0x2500
+#define PCI_DEVICE_ID_INTEL_82820_UP_HB	0x2501
+#define PCI_DEVICE_ID_INTEL_82850_HB	0x2530
+#define PCI_DEVICE_ID_INTEL_82860_HB	0x2531
+#define PCI_DEVICE_ID_INTEL_E7501_MCH	0x254c
+#define PCI_DEVICE_ID_INTEL_82845G_HB	0x2560
+#define PCI_DEVICE_ID_INTEL_82845G_IG	0x2562
+#define PCI_DEVICE_ID_INTEL_82865_HB	0x2570
+#define PCI_DEVICE_ID_INTEL_82865_IG	0x2572
+#define PCI_DEVICE_ID_INTEL_82875_HB	0x2578
+#define PCI_DEVICE_ID_INTEL_82915G_HB	0x2580
+#define PCI_DEVICE_ID_INTEL_82915G_IG	0x2582
+#define PCI_DEVICE_ID_INTEL_82915GM_HB	0x2590
+#define PCI_DEVICE_ID_INTEL_82915GM_IG	0x2592
+#define PCI_DEVICE_ID_INTEL_5000_ERR	0x25F0
+#define PCI_DEVICE_ID_INTEL_5000_FBD0	0x25F5
+#define PCI_DEVICE_ID_INTEL_5000_FBD1	0x25F6
+#define PCI_DEVICE_ID_INTEL_82945G_HB	0x2770
+#define PCI_DEVICE_ID_INTEL_82945G_IG	0x2772
+#define PCI_DEVICE_ID_INTEL_3000_HB	0x2778
+#define PCI_DEVICE_ID_INTEL_82945GM_HB	0x27A0
+#define PCI_DEVICE_ID_INTEL_82945GM_IG	0x27A2
+#define PCI_DEVICE_ID_INTEL_ICH6_0	0x2640
+#define PCI_DEVICE_ID_INTEL_ICH6_1	0x2641
+#define PCI_DEVICE_ID_INTEL_ICH6_2	0x2642
+#define PCI_DEVICE_ID_INTEL_ICH6_16	0x266a
+#define PCI_DEVICE_ID_INTEL_ICH6_17	0x266d
+#define PCI_DEVICE_ID_INTEL_ICH6_18	0x266e
+#define PCI_DEVICE_ID_INTEL_ICH6_19	0x266f
+#define PCI_DEVICE_ID_INTEL_ESB2_0	0x2670
+#define PCI_DEVICE_ID_INTEL_ESB2_14	0x2698
+#define PCI_DEVICE_ID_INTEL_ESB2_17	0x269b
+#define PCI_DEVICE_ID_INTEL_ESB2_18	0x269e
+#define PCI_DEVICE_ID_INTEL_ICH7_0	0x27b8
+#define PCI_DEVICE_ID_INTEL_ICH7_1	0x27b9
+#define PCI_DEVICE_ID_INTEL_ICH7_30	0x27b0
+#define PCI_DEVICE_ID_INTEL_TGP_LPC	0x27bc
+#define PCI_DEVICE_ID_INTEL_ICH7_31	0x27bd
+#define PCI_DEVICE_ID_INTEL_ICH7_17	0x27da
+#define PCI_DEVICE_ID_INTEL_ICH7_19	0x27dd
+#define PCI_DEVICE_ID_INTEL_ICH7_20	0x27de
+#define PCI_DEVICE_ID_INTEL_ICH7_21	0x27df
+#define PCI_DEVICE_ID_INTEL_ICH8_0	0x2810
+#define PCI_DEVICE_ID_INTEL_ICH8_1	0x2811
+#define PCI_DEVICE_ID_INTEL_ICH8_2	0x2812
+#define PCI_DEVICE_ID_INTEL_ICH8_3	0x2814
+#define PCI_DEVICE_ID_INTEL_ICH8_4	0x2815
+#define PCI_DEVICE_ID_INTEL_ICH8_5	0x283e
+#define PCI_DEVICE_ID_INTEL_ICH8_6	0x2850
+#define PCI_DEVICE_ID_INTEL_ICH9_0	0x2910
+#define PCI_DEVICE_ID_INTEL_ICH9_1	0x2917
+#define PCI_DEVICE_ID_INTEL_ICH9_2	0x2912
+#define PCI_DEVICE_ID_INTEL_ICH9_3	0x2913
+#define PCI_DEVICE_ID_INTEL_ICH9_4	0x2914
+#define PCI_DEVICE_ID_INTEL_ICH9_5	0x2919
+#define PCI_DEVICE_ID_INTEL_ICH9_6	0x2930
+#define PCI_DEVICE_ID_INTEL_ICH9_7	0x2916
+#define PCI_DEVICE_ID_INTEL_ICH9_8	0x2918
+#define PCI_DEVICE_ID_INTEL_I7_MCR	0x2c18
+#define PCI_DEVICE_ID_INTEL_I7_MC_TAD	0x2c19
+#define PCI_DEVICE_ID_INTEL_I7_MC_RAS	0x2c1a
+#define PCI_DEVICE_ID_INTEL_I7_MC_TEST	0x2c1c
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_CTRL  0x2c20
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_ADDR  0x2c21
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_RANK  0x2c22
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_TC    0x2c23
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_CTRL  0x2c28
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_ADDR  0x2c29
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_RANK  0x2c2a
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_TC    0x2c2b
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_CTRL  0x2c30
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_ADDR  0x2c31
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_RANK  0x2c32
+#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_TC    0x2c33
+#define PCI_DEVICE_ID_INTEL_I7_NONCORE	0x2c41
+#define PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT 0x2c40
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE     0x2c50
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT 0x2c51
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2 0x2c70
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_SAD         0x2c81
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_LINK0   0x2c90
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_PHY0    0x2c91
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR         0x2c98
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD      0x2c99
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST     0x2c9C
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL 0x2ca0
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR 0x2ca1
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK 0x2ca2
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC   0x2ca3
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL 0x2ca8
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR 0x2ca9
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK 0x2caa
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC   0x2cab
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR_REV2          0x2d98
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD_REV2       0x2d99
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_RAS_REV2       0x2d9a
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST_REV2      0x2d9c
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL_REV2  0x2da0
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR_REV2  0x2da1
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK_REV2  0x2da2
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC_REV2    0x2da3
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL_REV2  0x2da8
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR_REV2  0x2da9
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK_REV2  0x2daa
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC_REV2    0x2dab
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_CTRL_REV2  0x2db0
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_ADDR_REV2  0x2db1
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_RANK_REV2  0x2db2
+#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_TC_REV2    0x2db3
+#define PCI_DEVICE_ID_INTEL_82855PM_HB	0x3340
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG4	0x3429
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG5	0x342a
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG6	0x342b
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG7	0x342c
+#define PCI_DEVICE_ID_INTEL_X58_HUB_MGMT 0x342e
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG0	0x3430
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG1	0x3431
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG2	0x3432
+#define PCI_DEVICE_ID_INTEL_IOAT_TBG3	0x3433
+#define PCI_DEVICE_ID_INTEL_82830_HB	0x3575
+#define PCI_DEVICE_ID_INTEL_82830_CGC	0x3577
+#define PCI_DEVICE_ID_INTEL_82854_HB	0x358c
+#define PCI_DEVICE_ID_INTEL_82854_IG	0x358e
+#define PCI_DEVICE_ID_INTEL_82855GM_HB	0x3580
+#define PCI_DEVICE_ID_INTEL_82855GM_IG	0x3582
+#define PCI_DEVICE_ID_INTEL_E7520_MCH	0x3590
+#define PCI_DEVICE_ID_INTEL_E7320_MCH	0x3592
+#define PCI_DEVICE_ID_INTEL_MCH_PA	0x3595
+#define PCI_DEVICE_ID_INTEL_MCH_PA1	0x3596
+#define PCI_DEVICE_ID_INTEL_MCH_PB	0x3597
+#define PCI_DEVICE_ID_INTEL_MCH_PB1	0x3598
+#define PCI_DEVICE_ID_INTEL_MCH_PC	0x3599
+#define PCI_DEVICE_ID_INTEL_MCH_PC1	0x359a
+#define PCI_DEVICE_ID_INTEL_E7525_MCH	0x359e
+#define PCI_DEVICE_ID_INTEL_I7300_MCH_ERR 0x360c
+#define PCI_DEVICE_ID_INTEL_I7300_MCH_FB0 0x360f
+#define PCI_DEVICE_ID_INTEL_I7300_MCH_FB1 0x3610
+#define PCI_DEVICE_ID_INTEL_IOAT_CNB	0x360b
+#define PCI_DEVICE_ID_INTEL_FBD_CNB	0x360c
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF0	0x3710
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF1	0x3711
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF2	0x3712
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF3	0x3713
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF4	0x3714
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF5	0x3715
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF6	0x3716
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF7	0x3717
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF8	0x3718
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF9	0x3719
+#define PCI_DEVICE_ID_INTEL_ICH10_0	0x3a14
+#define PCI_DEVICE_ID_INTEL_ICH10_1	0x3a16
+#define PCI_DEVICE_ID_INTEL_ICH10_2	0x3a18
+#define PCI_DEVICE_ID_INTEL_ICH10_3	0x3a1a
+#define PCI_DEVICE_ID_INTEL_ICH10_4	0x3a30
+#define PCI_DEVICE_ID_INTEL_ICH10_5	0x3a60
+#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MIN	0x3b00
+#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MAX	0x3b1f
+#define PCI_DEVICE_ID_INTEL_IOAT_SNB0	0x3c20
+#define PCI_DEVICE_ID_INTEL_IOAT_SNB1	0x3c21
+#define PCI_DEVICE_ID_INTEL_IOAT_SNB2	0x3c22
+#define PCI_DEVICE_ID_INTEL_IOAT_SNB3	0x3c23
+#define PCI_DEVICE_ID_INTEL_IOAT_SNB4	0x3c24
+#define PCI_DEVICE_ID_INTEL_IOAT_SNB5	0x3c25
+#define PCI_DEVICE_ID_INTEL_IOAT_SNB6	0x3c26
+#define PCI_DEVICE_ID_INTEL_IOAT_SNB7	0x3c27
+#define PCI_DEVICE_ID_INTEL_IOAT_SNB8	0x3c2e
+#define PCI_DEVICE_ID_INTEL_IOAT_SNB9	0x3c2f
+#define PCI_DEVICE_ID_INTEL_IOAT_SNB	0x402f
+#define PCI_DEVICE_ID_INTEL_5100_16	0x65f0
+#define PCI_DEVICE_ID_INTEL_5100_21	0x65f5
+#define PCI_DEVICE_ID_INTEL_5100_22	0x65f6
+#define PCI_DEVICE_ID_INTEL_5400_ERR	0x4030
+#define PCI_DEVICE_ID_INTEL_5400_FBD0	0x4035
+#define PCI_DEVICE_ID_INTEL_5400_FBD1	0x4036
+#define PCI_DEVICE_ID_INTEL_IOAT_SCNB	0x65ff
+#define PCI_DEVICE_ID_INTEL_EP80579_0	0x5031
+#define PCI_DEVICE_ID_INTEL_EP80579_1	0x5032
+#define PCI_DEVICE_ID_INTEL_82371SB_0	0x7000
+#define PCI_DEVICE_ID_INTEL_82371SB_1	0x7010
+#define PCI_DEVICE_ID_INTEL_82371SB_2	0x7020
+#define PCI_DEVICE_ID_INTEL_82437VX	0x7030
+#define PCI_DEVICE_ID_INTEL_82439TX	0x7100
+#define PCI_DEVICE_ID_INTEL_82371AB_0	0x7110
+#define PCI_DEVICE_ID_INTEL_82371AB	0x7111
+#define PCI_DEVICE_ID_INTEL_82371AB_2	0x7112
+#define PCI_DEVICE_ID_INTEL_82371AB_3	0x7113
+#define PCI_DEVICE_ID_INTEL_82810_MC1	0x7120
+#define PCI_DEVICE_ID_INTEL_82810_IG1	0x7121
+#define PCI_DEVICE_ID_INTEL_82810_MC3	0x7122
+#define PCI_DEVICE_ID_INTEL_82810_IG3	0x7123
+#define PCI_DEVICE_ID_INTEL_82810E_MC	0x7124
+#define PCI_DEVICE_ID_INTEL_82810E_IG	0x7125
+#define PCI_DEVICE_ID_INTEL_82443LX_0	0x7180
+#define PCI_DEVICE_ID_INTEL_82443LX_1	0x7181
+#define PCI_DEVICE_ID_INTEL_82443BX_0	0x7190
+#define PCI_DEVICE_ID_INTEL_82443BX_1	0x7191
+#define PCI_DEVICE_ID_INTEL_82443BX_2	0x7192
+#define PCI_DEVICE_ID_INTEL_440MX	0x7195
+#define PCI_DEVICE_ID_INTEL_440MX_6	0x7196
+#define PCI_DEVICE_ID_INTEL_82443MX_0	0x7198
+#define PCI_DEVICE_ID_INTEL_82443MX_1	0x7199
+#define PCI_DEVICE_ID_INTEL_82443MX_3	0x719b
+#define PCI_DEVICE_ID_INTEL_82443GX_0	0x71a0
+#define PCI_DEVICE_ID_INTEL_82443GX_2	0x71a2
+#define PCI_DEVICE_ID_INTEL_82372FB_1	0x7601
+#define PCI_DEVICE_ID_INTEL_SCH_LPC	0x8119
+#define PCI_DEVICE_ID_INTEL_SCH_IDE	0x811a
+#define PCI_DEVICE_ID_INTEL_ITC_LPC	0x8186
+#define PCI_DEVICE_ID_INTEL_82454GX	0x84c4
+#define PCI_DEVICE_ID_INTEL_82450GX	0x84c5
+#define PCI_DEVICE_ID_INTEL_82451NX	0x84ca
+#define PCI_DEVICE_ID_INTEL_82454NX     0x84cb
+#define PCI_DEVICE_ID_INTEL_84460GX	0x84ea
+#define PCI_DEVICE_ID_INTEL_IXP4XX	0x8500
+#define PCI_DEVICE_ID_INTEL_IXP2800	0x9004
+#define PCI_DEVICE_ID_INTEL_S21152BB	0xb152
+
+#define PCI_VENDOR_ID_SCALEMP		0x8686
+#define PCI_DEVICE_ID_SCALEMP_VSMP_CTL	0x1010
+
+#define PCI_VENDOR_ID_COMPUTONE		0x8e0e
+#define PCI_DEVICE_ID_COMPUTONE_IP2EX	0x0291
+#define PCI_DEVICE_ID_COMPUTONE_PG	0x0302
+#define PCI_SUBVENDOR_ID_COMPUTONE	0x8e0e
+#define PCI_SUBDEVICE_ID_COMPUTONE_PG4	0x0001
+#define PCI_SUBDEVICE_ID_COMPUTONE_PG8	0x0002
+#define PCI_SUBDEVICE_ID_COMPUTONE_PG6	0x0003
+
+#define PCI_VENDOR_ID_KTI		0x8e2e
+
+#define PCI_VENDOR_ID_ADAPTEC		0x9004
+#define PCI_DEVICE_ID_ADAPTEC_7810	0x1078
+#define PCI_DEVICE_ID_ADAPTEC_7821	0x2178
+#define PCI_DEVICE_ID_ADAPTEC_38602	0x3860
+#define PCI_DEVICE_ID_ADAPTEC_7850	0x5078
+#define PCI_DEVICE_ID_ADAPTEC_7855	0x5578
+#define PCI_DEVICE_ID_ADAPTEC_3860	0x6038
+#define PCI_DEVICE_ID_ADAPTEC_1480A	0x6075
+#define PCI_DEVICE_ID_ADAPTEC_7860	0x6078
+#define PCI_DEVICE_ID_ADAPTEC_7861	0x6178
+#define PCI_DEVICE_ID_ADAPTEC_7870	0x7078
+#define PCI_DEVICE_ID_ADAPTEC_7871	0x7178
+#define PCI_DEVICE_ID_ADAPTEC_7872	0x7278
+#define PCI_DEVICE_ID_ADAPTEC_7873	0x7378
+#define PCI_DEVICE_ID_ADAPTEC_7874	0x7478
+#define PCI_DEVICE_ID_ADAPTEC_7895	0x7895
+#define PCI_DEVICE_ID_ADAPTEC_7880	0x8078
+#define PCI_DEVICE_ID_ADAPTEC_7881	0x8178
+#define PCI_DEVICE_ID_ADAPTEC_7882	0x8278
+#define PCI_DEVICE_ID_ADAPTEC_7883	0x8378
+#define PCI_DEVICE_ID_ADAPTEC_7884	0x8478
+#define PCI_DEVICE_ID_ADAPTEC_7885	0x8578
+#define PCI_DEVICE_ID_ADAPTEC_7886	0x8678
+#define PCI_DEVICE_ID_ADAPTEC_7887	0x8778
+#define PCI_DEVICE_ID_ADAPTEC_7888	0x8878
+
+#define PCI_VENDOR_ID_ADAPTEC2		0x9005
+#define PCI_DEVICE_ID_ADAPTEC2_2940U2	0x0010
+#define PCI_DEVICE_ID_ADAPTEC2_2930U2	0x0011
+#define PCI_DEVICE_ID_ADAPTEC2_7890B	0x0013
+#define PCI_DEVICE_ID_ADAPTEC2_7890	0x001f
+#define PCI_DEVICE_ID_ADAPTEC2_3940U2	0x0050
+#define PCI_DEVICE_ID_ADAPTEC2_3950U2D	0x0051
+#define PCI_DEVICE_ID_ADAPTEC2_7896	0x005f
+#define PCI_DEVICE_ID_ADAPTEC2_7892A	0x0080
+#define PCI_DEVICE_ID_ADAPTEC2_7892B	0x0081
+#define PCI_DEVICE_ID_ADAPTEC2_7892D	0x0083
+#define PCI_DEVICE_ID_ADAPTEC2_7892P	0x008f
+#define PCI_DEVICE_ID_ADAPTEC2_7899A	0x00c0
+#define PCI_DEVICE_ID_ADAPTEC2_7899B	0x00c1
+#define PCI_DEVICE_ID_ADAPTEC2_7899D	0x00c3
+#define PCI_DEVICE_ID_ADAPTEC2_7899P	0x00cf
+#define PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN   0x0500
+#define PCI_DEVICE_ID_ADAPTEC2_SCAMP	0x0503
+
+#define PCI_VENDOR_ID_HOLTEK		0x9412
+#define PCI_DEVICE_ID_HOLTEK_6565	0x6565
+
+#define PCI_VENDOR_ID_NETMOS		0x9710
+#define PCI_DEVICE_ID_NETMOS_9705	0x9705
+#define PCI_DEVICE_ID_NETMOS_9715	0x9715
+#define PCI_DEVICE_ID_NETMOS_9735	0x9735
+#define PCI_DEVICE_ID_NETMOS_9745	0x9745
+#define PCI_DEVICE_ID_NETMOS_9755	0x9755
+#define PCI_DEVICE_ID_NETMOS_9805	0x9805
+#define PCI_DEVICE_ID_NETMOS_9815	0x9815
+#define PCI_DEVICE_ID_NETMOS_9835	0x9835
+#define PCI_DEVICE_ID_NETMOS_9845	0x9845
+#define PCI_DEVICE_ID_NETMOS_9855	0x9855
+#define PCI_DEVICE_ID_NETMOS_9865	0x9865
+#define PCI_DEVICE_ID_NETMOS_9900	0x9900
+#define PCI_DEVICE_ID_NETMOS_9901	0x9901
+#define PCI_DEVICE_ID_NETMOS_9904	0x9904
+#define PCI_DEVICE_ID_NETMOS_9912	0x9912
+#define PCI_DEVICE_ID_NETMOS_9922	0x9922
+
+#define PCI_VENDOR_ID_3COM_2		0xa727
+
+#define PCI_VENDOR_ID_DIGIUM		0xd161
+#define PCI_DEVICE_ID_DIGIUM_HFC4S	0xb410
+
+#define PCI_SUBVENDOR_ID_EXSYS		0xd84d
+#define PCI_SUBDEVICE_ID_EXSYS_4014	0x4014
+#define PCI_SUBDEVICE_ID_EXSYS_4055	0x4055
+
+#define PCI_VENDOR_ID_TIGERJET		0xe159
+#define PCI_DEVICE_ID_TIGERJET_300	0x0001
+#define PCI_DEVICE_ID_TIGERJET_100	0x0002
+
+#define PCI_VENDOR_ID_XILINX_RME	0xea60
+#define PCI_DEVICE_ID_RME_DIGI32	0x9896
+#define PCI_DEVICE_ID_RME_DIGI32_PRO	0x9897
+#define PCI_DEVICE_ID_RME_DIGI32_8	0x9898
+
+#define PCI_VENDOR_ID_XEN		0x5853
+#define PCI_DEVICE_ID_XEN_PLATFORM	0x0001
+
+#define PCI_VENDOR_ID_OCZ		0x1b85
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
new file mode 100644
index 00000000..4b608f54
--- /dev/null
+++ b/include/linux/pci_regs.h
@@ -0,0 +1,738 @@
+/*
+ *	pci_regs.h
+ *
+ *	PCI standard defines
+ *	Copyright 1994, Drew Eckhardt
+ *	Copyright 1997--1999 Martin Mares <mj@ucw.cz>
+ *
+ *	For more information, please consult the following manuals (look at
+ *	http://www.pcisig.com/ for how to get them):
+ *
+ *	PCI BIOS Specification
+ *	PCI Local Bus Specification
+ *	PCI to PCI Bridge Specification
+ *	PCI System Design Guide
+ *
+ * 	For hypertransport information, please consult the following manuals
+ * 	from http://www.hypertransport.org
+ *
+ *	The Hypertransport I/O Link Specification
+ */
+
+#ifndef LINUX_PCI_REGS_H
+#define LINUX_PCI_REGS_H
+
+/*
+ * Under PCI, each device has 256 bytes of configuration address space,
+ * of which the first 64 bytes are standardized as follows:
+ */
+#define PCI_VENDOR_ID		0x00	/* 16 bits */
+#define PCI_DEVICE_ID		0x02	/* 16 bits */
+#define PCI_COMMAND		0x04	/* 16 bits */
+#define  PCI_COMMAND_IO		0x1	/* Enable response in I/O space */
+#define  PCI_COMMAND_MEMORY	0x2	/* Enable response in Memory space */
+#define  PCI_COMMAND_MASTER	0x4	/* Enable bus mastering */
+#define  PCI_COMMAND_SPECIAL	0x8	/* Enable response to special cycles */
+#define  PCI_COMMAND_INVALIDATE	0x10	/* Use memory write and invalidate */
+#define  PCI_COMMAND_VGA_PALETTE 0x20	/* Enable palette snooping */
+#define  PCI_COMMAND_PARITY	0x40	/* Enable parity checking */
+#define  PCI_COMMAND_WAIT 	0x80	/* Enable address/data stepping */
+#define  PCI_COMMAND_SERR	0x100	/* Enable SERR */
+#define  PCI_COMMAND_FAST_BACK	0x200	/* Enable back-to-back writes */
+#define  PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */
+
+#define PCI_STATUS		0x06	/* 16 bits */
+#define  PCI_STATUS_INTERRUPT	0x08	/* Interrupt status */
+#define  PCI_STATUS_CAP_LIST	0x10	/* Support Capability List */
+#define  PCI_STATUS_66MHZ	0x20	/* Support 66 Mhz PCI 2.1 bus */
+#define  PCI_STATUS_UDF		0x40	/* Support User Definable Features [obsolete] */
+#define  PCI_STATUS_FAST_BACK	0x80	/* Accept fast-back to back */
+#define  PCI_STATUS_PARITY	0x100	/* Detected parity error */
+#define  PCI_STATUS_DEVSEL_MASK	0x600	/* DEVSEL timing */
+#define  PCI_STATUS_DEVSEL_FAST		0x000
+#define  PCI_STATUS_DEVSEL_MEDIUM	0x200
+#define  PCI_STATUS_DEVSEL_SLOW		0x400
+#define  PCI_STATUS_SIG_TARGET_ABORT	0x800 /* Set on target abort */
+#define  PCI_STATUS_REC_TARGET_ABORT	0x1000 /* Master ack of " */
+#define  PCI_STATUS_REC_MASTER_ABORT	0x2000 /* Set on master abort */
+#define  PCI_STATUS_SIG_SYSTEM_ERROR	0x4000 /* Set when we drive SERR */
+#define  PCI_STATUS_DETECTED_PARITY	0x8000 /* Set on parity error */
+
+#define PCI_CLASS_REVISION	0x08	/* High 24 bits are class, low 8 revision */
+#define PCI_REVISION_ID		0x08	/* Revision ID */
+#define PCI_CLASS_PROG		0x09	/* Reg. Level Programming Interface */
+#define PCI_CLASS_DEVICE	0x0a	/* Device class */
+
+#define PCI_CACHE_LINE_SIZE	0x0c	/* 8 bits */
+#define PCI_LATENCY_TIMER	0x0d	/* 8 bits */
+#define PCI_HEADER_TYPE		0x0e	/* 8 bits */
+#define  PCI_HEADER_TYPE_NORMAL		0
+#define  PCI_HEADER_TYPE_BRIDGE		1
+#define  PCI_HEADER_TYPE_CARDBUS	2
+
+#define PCI_BIST		0x0f	/* 8 bits */
+#define  PCI_BIST_CODE_MASK	0x0f	/* Return result */
+#define  PCI_BIST_START		0x40	/* 1 to start BIST, 2 secs or less */
+#define  PCI_BIST_CAPABLE	0x80	/* 1 if BIST capable */
+
+/*
+ * Base addresses specify locations in memory or I/O space.
+ * Decoded size can be determined by writing a value of
+ * 0xffffffff to the register, and reading it back.  Only
+ * 1 bits are decoded.
+ */
+#define PCI_BASE_ADDRESS_0	0x10	/* 32 bits */
+#define PCI_BASE_ADDRESS_1	0x14	/* 32 bits [htype 0,1 only] */
+#define PCI_BASE_ADDRESS_2	0x18	/* 32 bits [htype 0 only] */
+#define PCI_BASE_ADDRESS_3	0x1c	/* 32 bits */
+#define PCI_BASE_ADDRESS_4	0x20	/* 32 bits */
+#define PCI_BASE_ADDRESS_5	0x24	/* 32 bits */
+#define  PCI_BASE_ADDRESS_SPACE		0x01	/* 0 = memory, 1 = I/O */
+#define  PCI_BASE_ADDRESS_SPACE_IO	0x01
+#define  PCI_BASE_ADDRESS_SPACE_MEMORY	0x00
+#define  PCI_BASE_ADDRESS_MEM_TYPE_MASK	0x06
+#define  PCI_BASE_ADDRESS_MEM_TYPE_32	0x00	/* 32 bit address */
+#define  PCI_BASE_ADDRESS_MEM_TYPE_1M	0x02	/* Below 1M [obsolete] */
+#define  PCI_BASE_ADDRESS_MEM_TYPE_64	0x04	/* 64 bit address */
+#define  PCI_BASE_ADDRESS_MEM_PREFETCH	0x08	/* prefetchable? */
+#define  PCI_BASE_ADDRESS_MEM_MASK	(~0x0fUL)
+#define  PCI_BASE_ADDRESS_IO_MASK	(~0x03UL)
+/* bit 1 is reserved if address_space = 1 */
+
+/* Header type 0 (normal devices) */
+#define PCI_CARDBUS_CIS		0x28
+#define PCI_SUBSYSTEM_VENDOR_ID	0x2c
+#define PCI_SUBSYSTEM_ID	0x2e
+#define PCI_ROM_ADDRESS		0x30	/* Bits 31..11 are address, 10..1 reserved */
+#define  PCI_ROM_ADDRESS_ENABLE	0x01
+#define PCI_ROM_ADDRESS_MASK	(~0x7ffUL)
+
+#define PCI_CAPABILITY_LIST	0x34	/* Offset of first capability list entry */
+
+/* 0x35-0x3b are reserved */
+#define PCI_INTERRUPT_LINE	0x3c	/* 8 bits */
+#define PCI_INTERRUPT_PIN	0x3d	/* 8 bits */
+#define PCI_MIN_GNT		0x3e	/* 8 bits */
+#define PCI_MAX_LAT		0x3f	/* 8 bits */
+
+/* Header type 1 (PCI-to-PCI bridges) */
+#define PCI_PRIMARY_BUS		0x18	/* Primary bus number */
+#define PCI_SECONDARY_BUS	0x19	/* Secondary bus number */
+#define PCI_SUBORDINATE_BUS	0x1a	/* Highest bus number behind the bridge */
+#define PCI_SEC_LATENCY_TIMER	0x1b	/* Latency timer for secondary interface */
+#define PCI_IO_BASE		0x1c	/* I/O range behind the bridge */
+#define PCI_IO_LIMIT		0x1d
+#define  PCI_IO_RANGE_TYPE_MASK	0x0fUL	/* I/O bridging type */
+#define  PCI_IO_RANGE_TYPE_16	0x00
+#define  PCI_IO_RANGE_TYPE_32	0x01
+#define  PCI_IO_RANGE_MASK	(~0x0fUL)
+#define PCI_SEC_STATUS		0x1e	/* Secondary status register, only bit 14 used */
+#define PCI_MEMORY_BASE		0x20	/* Memory range behind */
+#define PCI_MEMORY_LIMIT	0x22
+#define  PCI_MEMORY_RANGE_TYPE_MASK 0x0fUL
+#define  PCI_MEMORY_RANGE_MASK	(~0x0fUL)
+#define PCI_PREF_MEMORY_BASE	0x24	/* Prefetchable memory range behind */
+#define PCI_PREF_MEMORY_LIMIT	0x26
+#define  PCI_PREF_RANGE_TYPE_MASK 0x0fUL
+#define  PCI_PREF_RANGE_TYPE_32	0x00
+#define  PCI_PREF_RANGE_TYPE_64	0x01
+#define  PCI_PREF_RANGE_MASK	(~0x0fUL)
+#define PCI_PREF_BASE_UPPER32	0x28	/* Upper half of prefetchable memory range */
+#define PCI_PREF_LIMIT_UPPER32	0x2c
+#define PCI_IO_BASE_UPPER16	0x30	/* Upper half of I/O addresses */
+#define PCI_IO_LIMIT_UPPER16	0x32
+/* 0x34 same as for htype 0 */
+/* 0x35-0x3b is reserved */
+#define PCI_ROM_ADDRESS1	0x38	/* Same as PCI_ROM_ADDRESS, but for htype 1 */
+/* 0x3c-0x3d are same as for htype 0 */
+#define PCI_BRIDGE_CONTROL	0x3e
+#define  PCI_BRIDGE_CTL_PARITY	0x01	/* Enable parity detection on secondary interface */
+#define  PCI_BRIDGE_CTL_SERR	0x02	/* The same for SERR forwarding */
+#define  PCI_BRIDGE_CTL_ISA	0x04	/* Enable ISA mode */
+#define  PCI_BRIDGE_CTL_VGA	0x08	/* Forward VGA addresses */
+#define  PCI_BRIDGE_CTL_MASTER_ABORT	0x20  /* Report master aborts */
+#define  PCI_BRIDGE_CTL_BUS_RESET	0x40	/* Secondary bus reset */
+#define  PCI_BRIDGE_CTL_FAST_BACK	0x80	/* Fast Back2Back enabled on secondary interface */
+
+/* Header type 2 (CardBus bridges) */
+#define PCI_CB_CAPABILITY_LIST	0x14
+/* 0x15 reserved */
+#define PCI_CB_SEC_STATUS	0x16	/* Secondary status */
+#define PCI_CB_PRIMARY_BUS	0x18	/* PCI bus number */
+#define PCI_CB_CARD_BUS		0x19	/* CardBus bus number */
+#define PCI_CB_SUBORDINATE_BUS	0x1a	/* Subordinate bus number */
+#define PCI_CB_LATENCY_TIMER	0x1b	/* CardBus latency timer */
+#define PCI_CB_MEMORY_BASE_0	0x1c
+#define PCI_CB_MEMORY_LIMIT_0	0x20
+#define PCI_CB_MEMORY_BASE_1	0x24
+#define PCI_CB_MEMORY_LIMIT_1	0x28
+#define PCI_CB_IO_BASE_0	0x2c
+#define PCI_CB_IO_BASE_0_HI	0x2e
+#define PCI_CB_IO_LIMIT_0	0x30
+#define PCI_CB_IO_LIMIT_0_HI	0x32
+#define PCI_CB_IO_BASE_1	0x34
+#define PCI_CB_IO_BASE_1_HI	0x36
+#define PCI_CB_IO_LIMIT_1	0x38
+#define PCI_CB_IO_LIMIT_1_HI	0x3a
+#define  PCI_CB_IO_RANGE_MASK	(~0x03UL)
+/* 0x3c-0x3d are same as for htype 0 */
+#define PCI_CB_BRIDGE_CONTROL	0x3e
+#define  PCI_CB_BRIDGE_CTL_PARITY	0x01	/* Similar to standard bridge control register */
+#define  PCI_CB_BRIDGE_CTL_SERR		0x02
+#define  PCI_CB_BRIDGE_CTL_ISA		0x04
+#define  PCI_CB_BRIDGE_CTL_VGA		0x08
+#define  PCI_CB_BRIDGE_CTL_MASTER_ABORT	0x20
+#define  PCI_CB_BRIDGE_CTL_CB_RESET	0x40	/* CardBus reset */
+#define  PCI_CB_BRIDGE_CTL_16BIT_INT	0x80	/* Enable interrupt for 16-bit cards */
+#define  PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 0x100	/* Prefetch enable for both memory regions */
+#define  PCI_CB_BRIDGE_CTL_PREFETCH_MEM1 0x200
+#define  PCI_CB_BRIDGE_CTL_POST_WRITES	0x400
+#define PCI_CB_SUBSYSTEM_VENDOR_ID	0x40
+#define PCI_CB_SUBSYSTEM_ID		0x42
+#define PCI_CB_LEGACY_MODE_BASE		0x44	/* 16-bit PC Card legacy mode base address (ExCa) */
+/* 0x48-0x7f reserved */
+
+/* Capability lists */
+
+#define PCI_CAP_LIST_ID		0	/* Capability ID */
+#define  PCI_CAP_ID_PM		0x01	/* Power Management */
+#define  PCI_CAP_ID_AGP		0x02	/* Accelerated Graphics Port */
+#define  PCI_CAP_ID_VPD		0x03	/* Vital Product Data */
+#define  PCI_CAP_ID_SLOTID	0x04	/* Slot Identification */
+#define  PCI_CAP_ID_MSI		0x05	/* Message Signalled Interrupts */
+#define  PCI_CAP_ID_CHSWP	0x06	/* CompactPCI HotSwap */
+#define  PCI_CAP_ID_PCIX	0x07	/* PCI-X */
+#define  PCI_CAP_ID_HT		0x08	/* HyperTransport */
+#define  PCI_CAP_ID_VNDR	0x09	/* Vendor specific */
+#define  PCI_CAP_ID_DBG		0x0A	/* Debug port */
+#define  PCI_CAP_ID_CCRC	0x0B	/* CompactPCI Central Resource Control */
+#define  PCI_CAP_ID_SHPC 	0x0C	/* PCI Standard Hot-Plug Controller */
+#define  PCI_CAP_ID_SSVID	0x0D	/* Bridge subsystem vendor/device ID */
+#define  PCI_CAP_ID_AGP3	0x0E	/* AGP Target PCI-PCI bridge */
+#define  PCI_CAP_ID_EXP 	0x10	/* PCI Express */
+#define  PCI_CAP_ID_MSIX	0x11	/* MSI-X */
+#define  PCI_CAP_ID_AF		0x13	/* PCI Advanced Features */
+#define PCI_CAP_LIST_NEXT	1	/* Next capability in the list */
+#define PCI_CAP_FLAGS		2	/* Capability defined flags (16 bits) */
+#define PCI_CAP_SIZEOF		4
+
+/* Power Management Registers */
+
+#define PCI_PM_PMC		2	/* PM Capabilities Register */
+#define  PCI_PM_CAP_VER_MASK	0x0007	/* Version */
+#define  PCI_PM_CAP_PME_CLOCK	0x0008	/* PME clock required */
+#define  PCI_PM_CAP_RESERVED    0x0010  /* Reserved field */
+#define  PCI_PM_CAP_DSI		0x0020	/* Device specific initialization */
+#define  PCI_PM_CAP_AUX_POWER	0x01C0	/* Auxiliary power support mask */
+#define  PCI_PM_CAP_D1		0x0200	/* D1 power state support */
+#define  PCI_PM_CAP_D2		0x0400	/* D2 power state support */
+#define  PCI_PM_CAP_PME		0x0800	/* PME pin supported */
+#define  PCI_PM_CAP_PME_MASK	0xF800	/* PME Mask of all supported states */
+#define  PCI_PM_CAP_PME_D0	0x0800	/* PME# from D0 */
+#define  PCI_PM_CAP_PME_D1	0x1000	/* PME# from D1 */
+#define  PCI_PM_CAP_PME_D2	0x2000	/* PME# from D2 */
+#define  PCI_PM_CAP_PME_D3	0x4000	/* PME# from D3 (hot) */
+#define  PCI_PM_CAP_PME_D3cold	0x8000	/* PME# from D3 (cold) */
+#define  PCI_PM_CAP_PME_SHIFT	11	/* Start of the PME Mask in PMC */
+#define PCI_PM_CTRL		4	/* PM control and status register */
+#define  PCI_PM_CTRL_STATE_MASK	0x0003	/* Current power state (D0 to D3) */
+#define  PCI_PM_CTRL_NO_SOFT_RESET	0x0008	/* No reset for D3hot->D0 */
+#define  PCI_PM_CTRL_PME_ENABLE	0x0100	/* PME pin enable */
+#define  PCI_PM_CTRL_DATA_SEL_MASK	0x1e00	/* Data select (??) */
+#define  PCI_PM_CTRL_DATA_SCALE_MASK	0x6000	/* Data scale (??) */
+#define  PCI_PM_CTRL_PME_STATUS	0x8000	/* PME pin status */
+#define PCI_PM_PPB_EXTENSIONS	6	/* PPB support extensions (??) */
+#define  PCI_PM_PPB_B2_B3	0x40	/* Stop clock when in D3hot (??) */
+#define  PCI_PM_BPCC_ENABLE	0x80	/* Bus power/clock control enable (??) */
+#define PCI_PM_DATA_REGISTER	7	/* (??) */
+#define PCI_PM_SIZEOF		8
+
+/* AGP registers */
+
+#define PCI_AGP_VERSION		2	/* BCD version number */
+#define PCI_AGP_RFU		3	/* Rest of capability flags */
+#define PCI_AGP_STATUS		4	/* Status register */
+#define  PCI_AGP_STATUS_RQ_MASK	0xff000000	/* Maximum number of requests - 1 */
+#define  PCI_AGP_STATUS_SBA	0x0200	/* Sideband addressing supported */
+#define  PCI_AGP_STATUS_64BIT	0x0020	/* 64-bit addressing supported */
+#define  PCI_AGP_STATUS_FW	0x0010	/* FW transfers supported */
+#define  PCI_AGP_STATUS_RATE4	0x0004	/* 4x transfer rate supported */
+#define  PCI_AGP_STATUS_RATE2	0x0002	/* 2x transfer rate supported */
+#define  PCI_AGP_STATUS_RATE1	0x0001	/* 1x transfer rate supported */
+#define PCI_AGP_COMMAND		8	/* Control register */
+#define  PCI_AGP_COMMAND_RQ_MASK 0xff000000  /* Master: Maximum number of requests */
+#define  PCI_AGP_COMMAND_SBA	0x0200	/* Sideband addressing enabled */
+#define  PCI_AGP_COMMAND_AGP	0x0100	/* Allow processing of AGP transactions */
+#define  PCI_AGP_COMMAND_64BIT	0x0020 	/* Allow processing of 64-bit addresses */
+#define  PCI_AGP_COMMAND_FW	0x0010 	/* Force FW transfers */
+#define  PCI_AGP_COMMAND_RATE4	0x0004	/* Use 4x rate */
+#define  PCI_AGP_COMMAND_RATE2	0x0002	/* Use 2x rate */
+#define  PCI_AGP_COMMAND_RATE1	0x0001	/* Use 1x rate */
+#define PCI_AGP_SIZEOF		12
+
+/* Vital Product Data */
+
+#define PCI_VPD_ADDR		2	/* Address to access (15 bits!) */
+#define  PCI_VPD_ADDR_MASK	0x7fff	/* Address mask */
+#define  PCI_VPD_ADDR_F		0x8000	/* Write 0, 1 indicates completion */
+#define PCI_VPD_DATA		4	/* 32-bits of data returned here */
+
+/* Slot Identification */
+
+#define PCI_SID_ESR		2	/* Expansion Slot Register */
+#define  PCI_SID_ESR_NSLOTS	0x1f	/* Number of expansion slots available */
+#define  PCI_SID_ESR_FIC	0x20	/* First In Chassis Flag */
+#define PCI_SID_CHASSIS_NR	3	/* Chassis Number */
+
+/* Message Signalled Interrupts registers */
+
+#define PCI_MSI_FLAGS		2	/* Various flags */
+#define  PCI_MSI_FLAGS_64BIT	0x80	/* 64-bit addresses allowed */
+#define  PCI_MSI_FLAGS_QSIZE	0x70	/* Message queue size configured */
+#define  PCI_MSI_FLAGS_QMASK	0x0e	/* Maximum queue size available */
+#define  PCI_MSI_FLAGS_ENABLE	0x01	/* MSI feature enabled */
+#define  PCI_MSI_FLAGS_MASKBIT	0x100	/* 64-bit mask bits allowed */
+#define PCI_MSI_RFU		3	/* Rest of capability flags */
+#define PCI_MSI_ADDRESS_LO	4	/* Lower 32 bits */
+#define PCI_MSI_ADDRESS_HI	8	/* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */
+#define PCI_MSI_DATA_32		8	/* 16 bits of data for 32-bit devices */
+#define PCI_MSI_MASK_32		12	/* Mask bits register for 32-bit devices */
+#define PCI_MSI_DATA_64		12	/* 16 bits of data for 64-bit devices */
+#define PCI_MSI_MASK_64		16	/* Mask bits register for 64-bit devices */
+
+/* MSI-X registers */
+#define PCI_MSIX_FLAGS		2
+#define  PCI_MSIX_FLAGS_QSIZE	0x7FF
+#define  PCI_MSIX_FLAGS_ENABLE	(1 << 15)
+#define  PCI_MSIX_FLAGS_MASKALL	(1 << 14)
+#define PCI_MSIX_TABLE		4
+#define PCI_MSIX_PBA		8
+#define  PCI_MSIX_FLAGS_BIRMASK	(7 << 0)
+
+/* MSI-X entry's format */
+#define PCI_MSIX_ENTRY_SIZE		16
+#define  PCI_MSIX_ENTRY_LOWER_ADDR	0
+#define  PCI_MSIX_ENTRY_UPPER_ADDR	4
+#define  PCI_MSIX_ENTRY_DATA		8
+#define  PCI_MSIX_ENTRY_VECTOR_CTRL	12
+#define   PCI_MSIX_ENTRY_CTRL_MASKBIT	1
+
+/* CompactPCI Hotswap Register */
+
+#define PCI_CHSWP_CSR		2	/* Control and Status Register */
+#define  PCI_CHSWP_DHA		0x01	/* Device Hiding Arm */
+#define  PCI_CHSWP_EIM		0x02	/* ENUM# Signal Mask */
+#define  PCI_CHSWP_PIE		0x04	/* Pending Insert or Extract */
+#define  PCI_CHSWP_LOO		0x08	/* LED On / Off */
+#define  PCI_CHSWP_PI		0x30	/* Programming Interface */
+#define  PCI_CHSWP_EXT		0x40	/* ENUM# status - extraction */
+#define  PCI_CHSWP_INS		0x80	/* ENUM# status - insertion */
+
+/* PCI Advanced Feature registers */
+
+#define PCI_AF_LENGTH		2
+#define PCI_AF_CAP		3
+#define  PCI_AF_CAP_TP		0x01
+#define  PCI_AF_CAP_FLR		0x02
+#define PCI_AF_CTRL		4
+#define  PCI_AF_CTRL_FLR	0x01
+#define PCI_AF_STATUS		5
+#define  PCI_AF_STATUS_TP	0x01
+
+/* PCI-X registers */
+
+#define PCI_X_CMD		2	/* Modes & Features */
+#define  PCI_X_CMD_DPERR_E	0x0001	/* Data Parity Error Recovery Enable */
+#define  PCI_X_CMD_ERO		0x0002	/* Enable Relaxed Ordering */
+#define  PCI_X_CMD_READ_512	0x0000	/* 512 byte maximum read byte count */
+#define  PCI_X_CMD_READ_1K	0x0004	/* 1Kbyte maximum read byte count */
+#define  PCI_X_CMD_READ_2K	0x0008	/* 2Kbyte maximum read byte count */
+#define  PCI_X_CMD_READ_4K	0x000c	/* 4Kbyte maximum read byte count */
+#define  PCI_X_CMD_MAX_READ	0x000c	/* Max Memory Read Byte Count */
+				/* Max # of outstanding split transactions */
+#define  PCI_X_CMD_SPLIT_1	0x0000	/* Max 1 */
+#define  PCI_X_CMD_SPLIT_2	0x0010	/* Max 2 */
+#define  PCI_X_CMD_SPLIT_3	0x0020	/* Max 3 */
+#define  PCI_X_CMD_SPLIT_4	0x0030	/* Max 4 */
+#define  PCI_X_CMD_SPLIT_8	0x0040	/* Max 8 */
+#define  PCI_X_CMD_SPLIT_12	0x0050	/* Max 12 */
+#define  PCI_X_CMD_SPLIT_16	0x0060	/* Max 16 */
+#define  PCI_X_CMD_SPLIT_32	0x0070	/* Max 32 */
+#define  PCI_X_CMD_MAX_SPLIT	0x0070	/* Max Outstanding Split Transactions */
+#define  PCI_X_CMD_VERSION(x) 	(((x) >> 12) & 3) /* Version */
+#define PCI_X_STATUS		4	/* PCI-X capabilities */
+#define  PCI_X_STATUS_DEVFN	0x000000ff	/* A copy of devfn */
+#define  PCI_X_STATUS_BUS	0x0000ff00	/* A copy of bus nr */
+#define  PCI_X_STATUS_64BIT	0x00010000	/* 64-bit device */
+#define  PCI_X_STATUS_133MHZ	0x00020000	/* 133 MHz capable */
+#define  PCI_X_STATUS_SPL_DISC	0x00040000	/* Split Completion Discarded */
+#define  PCI_X_STATUS_UNX_SPL	0x00080000	/* Unexpected Split Completion */
+#define  PCI_X_STATUS_COMPLEX	0x00100000	/* Device Complexity */
+#define  PCI_X_STATUS_MAX_READ	0x00600000	/* Designed Max Memory Read Count */
+#define  PCI_X_STATUS_MAX_SPLIT	0x03800000	/* Designed Max Outstanding Split Transactions */
+#define  PCI_X_STATUS_MAX_CUM	0x1c000000	/* Designed Max Cumulative Read Size */
+#define  PCI_X_STATUS_SPL_ERR	0x20000000	/* Rcvd Split Completion Error Msg */
+#define  PCI_X_STATUS_266MHZ	0x40000000	/* 266 MHz capable */
+#define  PCI_X_STATUS_533MHZ	0x80000000	/* 533 MHz capable */
+
+/* PCI Bridge Subsystem ID registers */
+
+#define PCI_SSVID_VENDOR_ID     4	/* PCI-Bridge subsystem vendor id register */
+#define PCI_SSVID_DEVICE_ID     6	/* PCI-Bridge subsystem device id register */
+
+/* PCI Express capability registers */
+
+#define PCI_EXP_FLAGS		2	/* Capabilities register */
+#define PCI_EXP_FLAGS_VERS	0x000f	/* Capability version */
+#define PCI_EXP_FLAGS_TYPE	0x00f0	/* Device/Port type */
+#define  PCI_EXP_TYPE_ENDPOINT	0x0	/* Express Endpoint */
+#define  PCI_EXP_TYPE_LEG_END	0x1	/* Legacy Endpoint */
+#define  PCI_EXP_TYPE_ROOT_PORT 0x4	/* Root Port */
+#define  PCI_EXP_TYPE_UPSTREAM	0x5	/* Upstream Port */
+#define  PCI_EXP_TYPE_DOWNSTREAM 0x6	/* Downstream Port */
+#define  PCI_EXP_TYPE_PCI_BRIDGE 0x7	/* PCI/PCI-X Bridge */
+#define  PCI_EXP_TYPE_PCIE_BRIDGE 0x8	/* PCI/PCI-X to PCIE Bridge */
+#define  PCI_EXP_TYPE_RC_END	0x9	/* Root Complex Integrated Endpoint */
+#define  PCI_EXP_TYPE_RC_EC	0xa	/* Root Complex Event Collector */
+#define PCI_EXP_FLAGS_SLOT	0x0100	/* Slot implemented */
+#define PCI_EXP_FLAGS_IRQ	0x3e00	/* Interrupt message number */
+#define PCI_EXP_DEVCAP		4	/* Device capabilities */
+#define  PCI_EXP_DEVCAP_PAYLOAD	0x07	/* Max_Payload_Size */
+#define  PCI_EXP_DEVCAP_PHANTOM	0x18	/* Phantom functions */
+#define  PCI_EXP_DEVCAP_EXT_TAG	0x20	/* Extended tags */
+#define  PCI_EXP_DEVCAP_L0S	0x1c0	/* L0s Acceptable Latency */
+#define  PCI_EXP_DEVCAP_L1	0xe00	/* L1 Acceptable Latency */
+#define  PCI_EXP_DEVCAP_ATN_BUT	0x1000	/* Attention Button Present */
+#define  PCI_EXP_DEVCAP_ATN_IND	0x2000	/* Attention Indicator Present */
+#define  PCI_EXP_DEVCAP_PWR_IND	0x4000	/* Power Indicator Present */
+#define  PCI_EXP_DEVCAP_RBER	0x8000	/* Role-Based Error Reporting */
+#define  PCI_EXP_DEVCAP_PWR_VAL	0x3fc0000 /* Slot Power Limit Value */
+#define  PCI_EXP_DEVCAP_PWR_SCL	0xc000000 /* Slot Power Limit Scale */
+#define  PCI_EXP_DEVCAP_FLR     0x10000000 /* Function Level Reset */
+#define PCI_EXP_DEVCTL		8	/* Device Control */
+#define  PCI_EXP_DEVCTL_CERE	0x0001	/* Correctable Error Reporting En. */
+#define  PCI_EXP_DEVCTL_NFERE	0x0002	/* Non-Fatal Error Reporting Enable */
+#define  PCI_EXP_DEVCTL_FERE	0x0004	/* Fatal Error Reporting Enable */
+#define  PCI_EXP_DEVCTL_URRE	0x0008	/* Unsupported Request Reporting En. */
+#define  PCI_EXP_DEVCTL_RELAX_EN 0x0010 /* Enable relaxed ordering */
+#define  PCI_EXP_DEVCTL_PAYLOAD	0x00e0	/* Max_Payload_Size */
+#define  PCI_EXP_DEVCTL_EXT_TAG	0x0100	/* Extended Tag Field Enable */
+#define  PCI_EXP_DEVCTL_PHANTOM	0x0200	/* Phantom Functions Enable */
+#define  PCI_EXP_DEVCTL_AUX_PME	0x0400	/* Auxiliary Power PM Enable */
+#define  PCI_EXP_DEVCTL_NOSNOOP_EN 0x0800  /* Enable No Snoop */
+#define  PCI_EXP_DEVCTL_READRQ	0x7000	/* Max_Read_Request_Size */
+#define  PCI_EXP_DEVCTL_BCR_FLR 0x8000  /* Bridge Configuration Retry / FLR */
+#define PCI_EXP_DEVSTA		10	/* Device Status */
+#define  PCI_EXP_DEVSTA_CED	0x01	/* Correctable Error Detected */
+#define  PCI_EXP_DEVSTA_NFED	0x02	/* Non-Fatal Error Detected */
+#define  PCI_EXP_DEVSTA_FED	0x04	/* Fatal Error Detected */
+#define  PCI_EXP_DEVSTA_URD	0x08	/* Unsupported Request Detected */
+#define  PCI_EXP_DEVSTA_AUXPD	0x10	/* AUX Power Detected */
+#define  PCI_EXP_DEVSTA_TRPND	0x20	/* Transactions Pending */
+#define PCI_EXP_LNKCAP		12	/* Link Capabilities */
+#define  PCI_EXP_LNKCAP_SLS	0x0000000f /* Supported Link Speeds */
+#define  PCI_EXP_LNKCAP_MLW	0x000003f0 /* Maximum Link Width */
+#define  PCI_EXP_LNKCAP_ASPMS	0x00000c00 /* ASPM Support */
+#define  PCI_EXP_LNKCAP_L0SEL	0x00007000 /* L0s Exit Latency */
+#define  PCI_EXP_LNKCAP_L1EL	0x00038000 /* L1 Exit Latency */
+#define  PCI_EXP_LNKCAP_CLKPM	0x00040000 /* L1 Clock Power Management */
+#define  PCI_EXP_LNKCAP_SDERC	0x00080000 /* Surprise Down Error Reporting Capable */
+#define  PCI_EXP_LNKCAP_DLLLARC	0x00100000 /* Data Link Layer Link Active Reporting Capable */
+#define  PCI_EXP_LNKCAP_LBNC	0x00200000 /* Link Bandwidth Notification Capability */
+#define  PCI_EXP_LNKCAP_PN	0xff000000 /* Port Number */
+#define PCI_EXP_LNKCTL		16	/* Link Control */
+#define  PCI_EXP_LNKCTL_ASPMC	0x0003	/* ASPM Control */
+#define  PCI_EXP_LNKCTL_RCB	0x0008	/* Read Completion Boundary */
+#define  PCI_EXP_LNKCTL_LD	0x0010	/* Link Disable */
+#define  PCI_EXP_LNKCTL_RL	0x0020	/* Retrain Link */
+#define  PCI_EXP_LNKCTL_CCC	0x0040	/* Common Clock Configuration */
+#define  PCI_EXP_LNKCTL_ES	0x0080	/* Extended Synch */
+#define  PCI_EXP_LNKCTL_CLKREQ_EN 0x100	/* Enable clkreq */
+#define  PCI_EXP_LNKCTL_HAWD	0x0200	/* Hardware Autonomous Width Disable */
+#define  PCI_EXP_LNKCTL_LBMIE	0x0400	/* Link Bandwidth Management Interrupt Enable */
+#define  PCI_EXP_LNKCTL_LABIE	0x0800	/* Lnk Autonomous Bandwidth Interrupt Enable */
+#define PCI_EXP_LNKSTA		18	/* Link Status */
+#define  PCI_EXP_LNKSTA_CLS	0x000f	/* Current Link Speed */
+#define  PCI_EXP_LNKSTA_CLS_2_5GB 0x01	/* Current Link Speed 2.5GT/s */
+#define  PCI_EXP_LNKSTA_CLS_5_0GB 0x02	/* Current Link Speed 5.0GT/s */
+#define  PCI_EXP_LNKSTA_NLW	0x03f0	/* Nogotiated Link Width */
+#define  PCI_EXP_LNKSTA_NLW_SHIFT 4	/* start of NLW mask in link status */
+#define  PCI_EXP_LNKSTA_LT	0x0800	/* Link Training */
+#define  PCI_EXP_LNKSTA_SLC	0x1000	/* Slot Clock Configuration */
+#define  PCI_EXP_LNKSTA_DLLLA	0x2000	/* Data Link Layer Link Active */
+#define  PCI_EXP_LNKSTA_LBMS	0x4000	/* Link Bandwidth Management Status */
+#define  PCI_EXP_LNKSTA_LABS	0x8000	/* Link Autonomous Bandwidth Status */
+#define PCI_EXP_SLTCAP		20	/* Slot Capabilities */
+#define  PCI_EXP_SLTCAP_ABP	0x00000001 /* Attention Button Present */
+#define  PCI_EXP_SLTCAP_PCP	0x00000002 /* Power Controller Present */
+#define  PCI_EXP_SLTCAP_MRLSP	0x00000004 /* MRL Sensor Present */
+#define  PCI_EXP_SLTCAP_AIP	0x00000008 /* Attention Indicator Present */
+#define  PCI_EXP_SLTCAP_PIP	0x00000010 /* Power Indicator Present */
+#define  PCI_EXP_SLTCAP_HPS	0x00000020 /* Hot-Plug Surprise */
+#define  PCI_EXP_SLTCAP_HPC	0x00000040 /* Hot-Plug Capable */
+#define  PCI_EXP_SLTCAP_SPLV	0x00007f80 /* Slot Power Limit Value */
+#define  PCI_EXP_SLTCAP_SPLS	0x00018000 /* Slot Power Limit Scale */
+#define  PCI_EXP_SLTCAP_EIP	0x00020000 /* Electromechanical Interlock Present */
+#define  PCI_EXP_SLTCAP_NCCS	0x00040000 /* No Command Completed Support */
+#define  PCI_EXP_SLTCAP_PSN	0xfff80000 /* Physical Slot Number */
+#define PCI_EXP_SLTCTL		24	/* Slot Control */
+#define  PCI_EXP_SLTCTL_ABPE	0x0001	/* Attention Button Pressed Enable */
+#define  PCI_EXP_SLTCTL_PFDE	0x0002	/* Power Fault Detected Enable */
+#define  PCI_EXP_SLTCTL_MRLSCE	0x0004	/* MRL Sensor Changed Enable */
+#define  PCI_EXP_SLTCTL_PDCE	0x0008	/* Presence Detect Changed Enable */
+#define  PCI_EXP_SLTCTL_CCIE	0x0010	/* Command Completed Interrupt Enable */
+#define  PCI_EXP_SLTCTL_HPIE	0x0020	/* Hot-Plug Interrupt Enable */
+#define  PCI_EXP_SLTCTL_AIC	0x00c0	/* Attention Indicator Control */
+#define  PCI_EXP_SLTCTL_PIC	0x0300	/* Power Indicator Control */
+#define  PCI_EXP_SLTCTL_PCC	0x0400	/* Power Controller Control */
+#define  PCI_EXP_SLTCTL_EIC	0x0800	/* Electromechanical Interlock Control */
+#define  PCI_EXP_SLTCTL_DLLSCE	0x1000	/* Data Link Layer State Changed Enable */
+#define PCI_EXP_SLTSTA		26	/* Slot Status */
+#define  PCI_EXP_SLTSTA_ABP	0x0001	/* Attention Button Pressed */
+#define  PCI_EXP_SLTSTA_PFD	0x0002	/* Power Fault Detected */
+#define  PCI_EXP_SLTSTA_MRLSC	0x0004	/* MRL Sensor Changed */
+#define  PCI_EXP_SLTSTA_PDC	0x0008	/* Presence Detect Changed */
+#define  PCI_EXP_SLTSTA_CC	0x0010	/* Command Completed */
+#define  PCI_EXP_SLTSTA_MRLSS	0x0020	/* MRL Sensor State */
+#define  PCI_EXP_SLTSTA_PDS	0x0040	/* Presence Detect State */
+#define  PCI_EXP_SLTSTA_EIS	0x0080	/* Electromechanical Interlock Status */
+#define  PCI_EXP_SLTSTA_DLLSC	0x0100	/* Data Link Layer State Changed */
+#define PCI_EXP_RTCTL		28	/* Root Control */
+#define  PCI_EXP_RTCTL_SECEE	0x01	/* System Error on Correctable Error */
+#define  PCI_EXP_RTCTL_SENFEE	0x02	/* System Error on Non-Fatal Error */
+#define  PCI_EXP_RTCTL_SEFEE	0x04	/* System Error on Fatal Error */
+#define  PCI_EXP_RTCTL_PMEIE	0x08	/* PME Interrupt Enable */
+#define  PCI_EXP_RTCTL_CRSSVE	0x10	/* CRS Software Visibility Enable */
+#define PCI_EXP_RTCAP		30	/* Root Capabilities */
+#define PCI_EXP_RTSTA		32	/* Root Status */
+#define PCI_EXP_RTSTA_PME	0x10000 /* PME status */
+#define PCI_EXP_RTSTA_PENDING	0x20000 /* PME pending */
+#define PCI_EXP_DEVCAP2		36	/* Device Capabilities 2 */
+#define  PCI_EXP_DEVCAP2_ARI	0x20	/* Alternative Routing-ID */
+#define  PCI_EXP_DEVCAP2_LTR	0x800	/* Latency tolerance reporting */
+#define  PCI_EXP_OBFF_MASK	0xc0000 /* OBFF support mechanism */
+#define  PCI_EXP_OBFF_MSG	0x40000 /* New message signaling */
+#define  PCI_EXP_OBFF_WAKE	0x80000 /* Re-use WAKE# for OBFF */
+#define PCI_EXP_DEVCTL2		40	/* Device Control 2 */
+#define  PCI_EXP_DEVCTL2_ARI	0x20	/* Alternative Routing-ID */
+#define  PCI_EXP_IDO_REQ_EN	0x100	/* ID-based ordering request enable */
+#define  PCI_EXP_IDO_CMP_EN	0x200	/* ID-based ordering completion enable */
+#define  PCI_EXP_LTR_EN		0x400	/* Latency tolerance reporting */
+#define  PCI_EXP_OBFF_MSGA_EN	0x2000	/* OBFF enable with Message type A */
+#define  PCI_EXP_OBFF_MSGB_EN	0x4000	/* OBFF enable with Message type B */
+#define  PCI_EXP_OBFF_WAKE_EN	0x6000	/* OBFF using WAKE# signaling */
+#define PCI_EXP_LNKCTL2		48	/* Link Control 2 */
+#define PCI_EXP_SLTCTL2		56	/* Slot Control 2 */
+
+/* Extended Capabilities (PCI-X 2.0 and Express) */
+#define PCI_EXT_CAP_ID(header)		(header & 0x0000ffff)
+#define PCI_EXT_CAP_VER(header)		((header >> 16) & 0xf)
+#define PCI_EXT_CAP_NEXT(header)	((header >> 20) & 0xffc)
+
+#define PCI_EXT_CAP_ID_ERR	1
+#define PCI_EXT_CAP_ID_VC	2
+#define PCI_EXT_CAP_ID_DSN	3
+#define PCI_EXT_CAP_ID_PWR	4
+#define PCI_EXT_CAP_ID_VNDR	11
+#define PCI_EXT_CAP_ID_ACS	13
+#define PCI_EXT_CAP_ID_ARI	14
+#define PCI_EXT_CAP_ID_ATS	15
+#define PCI_EXT_CAP_ID_SRIOV	16
+#define PCI_EXT_CAP_ID_PRI	19
+#define PCI_EXT_CAP_ID_LTR	24
+#define PCI_EXT_CAP_ID_PASID	27
+
+/* Advanced Error Reporting */
+#define PCI_ERR_UNCOR_STATUS	4	/* Uncorrectable Error Status */
+#define  PCI_ERR_UNC_TRAIN	0x00000001	/* Training */
+#define  PCI_ERR_UNC_DLP	0x00000010	/* Data Link Protocol */
+#define  PCI_ERR_UNC_POISON_TLP	0x00001000	/* Poisoned TLP */
+#define  PCI_ERR_UNC_FCP	0x00002000	/* Flow Control Protocol */
+#define  PCI_ERR_UNC_COMP_TIME	0x00004000	/* Completion Timeout */
+#define  PCI_ERR_UNC_COMP_ABORT	0x00008000	/* Completer Abort */
+#define  PCI_ERR_UNC_UNX_COMP	0x00010000	/* Unexpected Completion */
+#define  PCI_ERR_UNC_RX_OVER	0x00020000	/* Receiver Overflow */
+#define  PCI_ERR_UNC_MALF_TLP	0x00040000	/* Malformed TLP */
+#define  PCI_ERR_UNC_ECRC	0x00080000	/* ECRC Error Status */
+#define  PCI_ERR_UNC_UNSUP	0x00100000	/* Unsupported Request */
+#define PCI_ERR_UNCOR_MASK	8	/* Uncorrectable Error Mask */
+	/* Same bits as above */
+#define PCI_ERR_UNCOR_SEVER	12	/* Uncorrectable Error Severity */
+	/* Same bits as above */
+#define PCI_ERR_COR_STATUS	16	/* Correctable Error Status */
+#define  PCI_ERR_COR_RCVR	0x00000001	/* Receiver Error Status */
+#define  PCI_ERR_COR_BAD_TLP	0x00000040	/* Bad TLP Status */
+#define  PCI_ERR_COR_BAD_DLLP	0x00000080	/* Bad DLLP Status */
+#define  PCI_ERR_COR_REP_ROLL	0x00000100	/* REPLAY_NUM Rollover */
+#define  PCI_ERR_COR_REP_TIMER	0x00001000	/* Replay Timer Timeout */
+#define PCI_ERR_COR_MASK	20	/* Correctable Error Mask */
+	/* Same bits as above */
+#define PCI_ERR_CAP		24	/* Advanced Error Capabilities */
+#define  PCI_ERR_CAP_FEP(x)	((x) & 31)	/* First Error Pointer */
+#define  PCI_ERR_CAP_ECRC_GENC	0x00000020	/* ECRC Generation Capable */
+#define  PCI_ERR_CAP_ECRC_GENE	0x00000040	/* ECRC Generation Enable */
+#define  PCI_ERR_CAP_ECRC_CHKC	0x00000080	/* ECRC Check Capable */
+#define  PCI_ERR_CAP_ECRC_CHKE	0x00000100	/* ECRC Check Enable */
+#define PCI_ERR_HEADER_LOG	28	/* Header Log Register (16 bytes) */
+#define PCI_ERR_ROOT_COMMAND	44	/* Root Error Command */
+/* Correctable Err Reporting Enable */
+#define PCI_ERR_ROOT_CMD_COR_EN		0x00000001
+/* Non-fatal Err Reporting Enable */
+#define PCI_ERR_ROOT_CMD_NONFATAL_EN	0x00000002
+/* Fatal Err Reporting Enable */
+#define PCI_ERR_ROOT_CMD_FATAL_EN	0x00000004
+#define PCI_ERR_ROOT_STATUS	48
+#define PCI_ERR_ROOT_COR_RCV		0x00000001	/* ERR_COR Received */
+/* Multi ERR_COR Received */
+#define PCI_ERR_ROOT_MULTI_COR_RCV	0x00000002
+/* ERR_FATAL/NONFATAL Recevied */
+#define PCI_ERR_ROOT_UNCOR_RCV		0x00000004
+/* Multi ERR_FATAL/NONFATAL Recevied */
+#define PCI_ERR_ROOT_MULTI_UNCOR_RCV	0x00000008
+#define PCI_ERR_ROOT_FIRST_FATAL	0x00000010	/* First Fatal */
+#define PCI_ERR_ROOT_NONFATAL_RCV	0x00000020	/* Non-Fatal Received */
+#define PCI_ERR_ROOT_FATAL_RCV		0x00000040	/* Fatal Received */
+#define PCI_ERR_ROOT_ERR_SRC	52	/* Error Source Identification */
+
+/* Virtual Channel */
+#define PCI_VC_PORT_REG1	4
+#define PCI_VC_PORT_REG2	8
+#define PCI_VC_PORT_CTRL	12
+#define PCI_VC_PORT_STATUS	14
+#define PCI_VC_RES_CAP		16
+#define PCI_VC_RES_CTRL		20
+#define PCI_VC_RES_STATUS	26
+
+/* Power Budgeting */
+#define PCI_PWR_DSR		4	/* Data Select Register */
+#define PCI_PWR_DATA		8	/* Data Register */
+#define  PCI_PWR_DATA_BASE(x)	((x) & 0xff)	    /* Base Power */
+#define  PCI_PWR_DATA_SCALE(x)	(((x) >> 8) & 3)    /* Data Scale */
+#define  PCI_PWR_DATA_PM_SUB(x)	(((x) >> 10) & 7)   /* PM Sub State */
+#define  PCI_PWR_DATA_PM_STATE(x) (((x) >> 13) & 3) /* PM State */
+#define  PCI_PWR_DATA_TYPE(x)	(((x) >> 15) & 7)   /* Type */
+#define  PCI_PWR_DATA_RAIL(x)	(((x) >> 18) & 7)   /* Power Rail */
+#define PCI_PWR_CAP		12	/* Capability */
+#define  PCI_PWR_CAP_BUDGET(x)	((x) & 1)	/* Included in system budget */
+
+/*
+ * Hypertransport sub capability types
+ *
+ * Unfortunately there are both 3 bit and 5 bit capability types defined
+ * in the HT spec, catering for that is a little messy. You probably don't
+ * want to use these directly, just use pci_find_ht_capability() and it
+ * will do the right thing for you.
+ */
+#define HT_3BIT_CAP_MASK	0xE0
+#define HT_CAPTYPE_SLAVE	0x00	/* Slave/Primary link configuration */
+#define HT_CAPTYPE_HOST		0x20	/* Host/Secondary link configuration */
+
+#define HT_5BIT_CAP_MASK	0xF8
+#define HT_CAPTYPE_IRQ		0x80	/* IRQ Configuration */
+#define HT_CAPTYPE_REMAPPING_40	0xA0	/* 40 bit address remapping */
+#define HT_CAPTYPE_REMAPPING_64 0xA2	/* 64 bit address remapping */
+#define HT_CAPTYPE_UNITID_CLUMP	0x90	/* Unit ID clumping */
+#define HT_CAPTYPE_EXTCONF	0x98	/* Extended Configuration Space Access */
+#define HT_CAPTYPE_MSI_MAPPING	0xA8	/* MSI Mapping Capability */
+#define  HT_MSI_FLAGS		0x02		/* Offset to flags */
+#define  HT_MSI_FLAGS_ENABLE	0x1		/* Mapping enable */
+#define  HT_MSI_FLAGS_FIXED	0x2		/* Fixed mapping only */
+#define  HT_MSI_FIXED_ADDR	0x00000000FEE00000ULL	/* Fixed addr */
+#define  HT_MSI_ADDR_LO		0x04		/* Offset to low addr bits */
+#define  HT_MSI_ADDR_LO_MASK	0xFFF00000	/* Low address bit mask */
+#define  HT_MSI_ADDR_HI		0x08		/* Offset to high addr bits */
+#define HT_CAPTYPE_DIRECT_ROUTE	0xB0	/* Direct routing configuration */
+#define HT_CAPTYPE_VCSET	0xB8	/* Virtual Channel configuration */
+#define HT_CAPTYPE_ERROR_RETRY	0xC0	/* Retry on error configuration */
+#define HT_CAPTYPE_GEN3		0xD0	/* Generation 3 hypertransport configuration */
+#define HT_CAPTYPE_PM		0xE0	/* Hypertransport powermanagement configuration */
+
+/* Alternative Routing-ID Interpretation */
+#define PCI_ARI_CAP		0x04	/* ARI Capability Register */
+#define  PCI_ARI_CAP_MFVC	0x0001	/* MFVC Function Groups Capability */
+#define  PCI_ARI_CAP_ACS	0x0002	/* ACS Function Groups Capability */
+#define  PCI_ARI_CAP_NFN(x)	(((x) >> 8) & 0xff) /* Next Function Number */
+#define PCI_ARI_CTRL		0x06	/* ARI Control Register */
+#define  PCI_ARI_CTRL_MFVC	0x0001	/* MFVC Function Groups Enable */
+#define  PCI_ARI_CTRL_ACS	0x0002	/* ACS Function Groups Enable */
+#define  PCI_ARI_CTRL_FG(x)	(((x) >> 4) & 7) /* Function Group */
+
+/* Address Translation Service */
+#define PCI_ATS_CAP		0x04	/* ATS Capability Register */
+#define  PCI_ATS_CAP_QDEP(x)	((x) & 0x1f)	/* Invalidate Queue Depth */
+#define  PCI_ATS_MAX_QDEP	32	/* Max Invalidate Queue Depth */
+#define PCI_ATS_CTRL		0x06	/* ATS Control Register */
+#define  PCI_ATS_CTRL_ENABLE	0x8000	/* ATS Enable */
+#define  PCI_ATS_CTRL_STU(x)	((x) & 0x1f)	/* Smallest Translation Unit */
+#define  PCI_ATS_MIN_STU	12	/* shift of minimum STU block */
+
+/* Page Request Interface */
+#define PCI_PRI_CTRL		0x04	/* PRI control register */
+#define  PCI_PRI_CTRL_ENABLE	0x01	/* Enable */
+#define  PCI_PRI_CTRL_RESET	0x02	/* Reset */
+#define PCI_PRI_STATUS		0x06	/* PRI status register */
+#define  PCI_PRI_STATUS_RF	0x001	/* Response Failure */
+#define  PCI_PRI_STATUS_UPRGI	0x002	/* Unexpected PRG index */
+#define  PCI_PRI_STATUS_STOPPED	0x100	/* PRI Stopped */
+#define PCI_PRI_MAX_REQ		0x08	/* PRI max reqs supported */
+#define PCI_PRI_ALLOC_REQ	0x0c	/* PRI max reqs allowed */
+
+/* PASID capability */
+#define PCI_PASID_CAP		0x04    /* PASID feature register */
+#define  PCI_PASID_CAP_EXEC	0x02	/* Exec permissions Supported */
+#define  PCI_PASID_CAP_PRIV	0x04	/* Priviledge Mode Supported */
+#define PCI_PASID_CTRL		0x06    /* PASID control register */
+#define  PCI_PASID_CTRL_ENABLE	0x01	/* Enable bit */
+#define  PCI_PASID_CTRL_EXEC	0x02	/* Exec permissions Enable */
+#define  PCI_PASID_CTRL_PRIV	0x04	/* Priviledge Mode Enable */
+
+/* Single Root I/O Virtualization */
+#define PCI_SRIOV_CAP		0x04	/* SR-IOV Capabilities */
+#define  PCI_SRIOV_CAP_VFM	0x01	/* VF Migration Capable */
+#define  PCI_SRIOV_CAP_INTR(x)	((x) >> 21) /* Interrupt Message Number */
+#define PCI_SRIOV_CTRL		0x08	/* SR-IOV Control */
+#define  PCI_SRIOV_CTRL_VFE	0x01	/* VF Enable */
+#define  PCI_SRIOV_CTRL_VFM	0x02	/* VF Migration Enable */
+#define  PCI_SRIOV_CTRL_INTR	0x04	/* VF Migration Interrupt Enable */
+#define  PCI_SRIOV_CTRL_MSE	0x08	/* VF Memory Space Enable */
+#define  PCI_SRIOV_CTRL_ARI	0x10	/* ARI Capable Hierarchy */
+#define PCI_SRIOV_STATUS	0x0a	/* SR-IOV Status */
+#define  PCI_SRIOV_STATUS_VFM	0x01	/* VF Migration Status */
+#define PCI_SRIOV_INITIAL_VF	0x0c	/* Initial VFs */
+#define PCI_SRIOV_TOTAL_VF	0x0e	/* Total VFs */
+#define PCI_SRIOV_NUM_VF	0x10	/* Number of VFs */
+#define PCI_SRIOV_FUNC_LINK	0x12	/* Function Dependency Link */
+#define PCI_SRIOV_VF_OFFSET	0x14	/* First VF Offset */
+#define PCI_SRIOV_VF_STRIDE	0x16	/* Following VF Stride */
+#define PCI_SRIOV_VF_DID	0x1a	/* VF Device ID */
+#define PCI_SRIOV_SUP_PGSIZE	0x1c	/* Supported Page Sizes */
+#define PCI_SRIOV_SYS_PGSIZE	0x20	/* System Page Size */
+#define PCI_SRIOV_BAR		0x24	/* VF BAR0 */
+#define  PCI_SRIOV_NUM_BARS	6	/* Number of VF BARs */
+#define PCI_SRIOV_VFM		0x3c	/* VF Migration State Array Offset*/
+#define  PCI_SRIOV_VFM_BIR(x)	((x) & 7)	/* State BIR */
+#define  PCI_SRIOV_VFM_OFFSET(x) ((x) & ~7)	/* State Offset */
+#define  PCI_SRIOV_VFM_UA	0x0	/* Inactive.Unavailable */
+#define  PCI_SRIOV_VFM_MI	0x1	/* Dormant.MigrateIn */
+#define  PCI_SRIOV_VFM_MO	0x2	/* Active.MigrateOut */
+#define  PCI_SRIOV_VFM_AV	0x3	/* Active.Available */
+
+#define PCI_LTR_MAX_SNOOP_LAT	0x4
+#define PCI_LTR_MAX_NOSNOOP_LAT	0x6
+#define  PCI_LTR_VALUE_MASK	0x000003ff
+#define  PCI_LTR_SCALE_MASK	0x00001c00
+#define  PCI_LTR_SCALE_SHIFT	10
+
+/* Access Control Service */
+#define PCI_ACS_CAP		0x04	/* ACS Capability Register */
+#define  PCI_ACS_SV		0x01	/* Source Validation */
+#define  PCI_ACS_TB		0x02	/* Translation Blocking */
+#define  PCI_ACS_RR		0x04	/* P2P Request Redirect */
+#define  PCI_ACS_CR		0x08	/* P2P Completion Redirect */
+#define  PCI_ACS_UF		0x10	/* Upstream Forwarding */
+#define  PCI_ACS_EC		0x20	/* P2P Egress Control */
+#define  PCI_ACS_DT		0x40	/* Direct Translated P2P */
+#define PCI_ACS_CTRL		0x06	/* ACS Control Register */
+#define PCI_ACS_EGRESS_CTL_V	0x08	/* ACS Egress Control Vector */
+
+#endif /* LINUX_PCI_REGS_H */
diff --git a/include/linux/pcieport_if.h b/include/linux/pcieport_if.h
new file mode 100644
index 00000000..6775532b
--- /dev/null
+++ b/include/linux/pcieport_if.h
@@ -0,0 +1,68 @@
+/*
+ * File:	pcieport_if.h
+ * Purpose:	PCI Express Port Bus Driver's IF Data Structure
+ *
+ * Copyright (C) 2004 Intel
+ * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
+ */
+
+#ifndef _PCIEPORT_IF_H_
+#define _PCIEPORT_IF_H_
+
+/* Port Type */
+#define PCIE_ANY_PORT			(~0)
+
+/* Service Type */
+#define PCIE_PORT_SERVICE_PME_SHIFT	0	/* Power Management Event */
+#define PCIE_PORT_SERVICE_PME		(1 << PCIE_PORT_SERVICE_PME_SHIFT)
+#define PCIE_PORT_SERVICE_AER_SHIFT	1	/* Advanced Error Reporting */
+#define PCIE_PORT_SERVICE_AER		(1 << PCIE_PORT_SERVICE_AER_SHIFT)
+#define PCIE_PORT_SERVICE_HP_SHIFT	2	/* Native Hotplug */
+#define PCIE_PORT_SERVICE_HP		(1 << PCIE_PORT_SERVICE_HP_SHIFT)
+#define PCIE_PORT_SERVICE_VC_SHIFT	3	/* Virtual Channel */
+#define PCIE_PORT_SERVICE_VC		(1 << PCIE_PORT_SERVICE_VC_SHIFT)
+
+struct pcie_device {
+	int 		irq;	    /* Service IRQ/MSI/MSI-X Vector */
+	struct pci_dev *port;	    /* Root/Upstream/Downstream Port */
+	u32		service;    /* Port service this device represents */
+	void		*priv_data; /* Service Private Data */
+	struct device	device;     /* Generic Device Interface */
+};
+#define to_pcie_device(d) container_of(d, struct pcie_device, device)
+
+static inline void set_service_data(struct pcie_device *dev, void *data)
+{
+	dev->priv_data = data;
+}
+
+static inline void* get_service_data(struct pcie_device *dev)
+{
+	return dev->priv_data;
+}
+
+struct pcie_port_service_driver {
+	const char *name;
+	int (*probe) (struct pcie_device *dev);
+	void (*remove) (struct pcie_device *dev);
+	int (*suspend) (struct pcie_device *dev);
+	int (*resume) (struct pcie_device *dev);
+
+	/* Service Error Recovery Handler */
+	struct pci_error_handlers *err_handler;
+
+	/* Link Reset Capability - AER service driver specific */
+	pci_ers_result_t (*reset_link) (struct pci_dev *dev);
+
+	int port_type;  /* Type of the port this driver can handle */
+	u32 service;    /* Port service this device represents */
+
+	struct device_driver driver;
+};
+#define to_service_driver(d) \
+	container_of(d, struct pcie_port_service_driver, driver)
+
+extern int pcie_port_service_register(struct pcie_port_service_driver *new);
+extern void pcie_port_service_unregister(struct pcie_port_service_driver *new);
+
+#endif /* _PCIEPORT_IF_H_ */
diff --git a/include/linux/pda_power.h b/include/linux/pda_power.h
new file mode 100644
index 00000000..2bb62bf2
--- /dev/null
+++ b/include/linux/pda_power.h
@@ -0,0 +1,42 @@
+/*
+ * Common power driver for PDAs and phones with one or two external
+ * power supplies (AC/USB) connected to main and backup batteries,
+ * and optional builtin charger.
+ *
+ * Copyright © 2007 Anton Vorontsov <cbou@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PDA_POWER_H__
+#define __PDA_POWER_H__
+
+#define PDA_POWER_CHARGE_AC  (1 << 0)
+#define PDA_POWER_CHARGE_USB (1 << 1)
+
+struct device;
+
+struct pda_power_pdata {
+	int (*init)(struct device *dev);
+	int (*is_ac_online)(void);
+	int (*is_usb_online)(void);
+	void (*set_charge)(int flags);
+	void (*exit)(struct device *dev);
+	int (*suspend)(pm_message_t state);
+	int (*resume)(void);
+
+	char **supplied_to;
+	size_t num_supplicants;
+
+	unsigned int wait_for_status; /* msecs, default is 500 */
+	unsigned int wait_for_charger; /* msecs, default is 500 */
+	unsigned int polling_interval; /* msecs, default is 2000 */
+
+	unsigned long ac_max_uA; /* current to draw when on AC */
+
+	bool use_otg_notifier;
+};
+
+#endif /* __PDA_POWER_H__ */
diff --git a/include/linux/percpu-defs.h b/include/linux/percpu-defs.h
new file mode 100644
index 00000000..27ef6b19
--- /dev/null
+++ b/include/linux/percpu-defs.h
@@ -0,0 +1,163 @@
+#ifndef _LINUX_PERCPU_DEFS_H
+#define _LINUX_PERCPU_DEFS_H
+
+/*
+ * Base implementations of per-CPU variable declarations and definitions, where
+ * the section in which the variable is to be placed is provided by the
+ * 'sec' argument.  This may be used to affect the parameters governing the
+ * variable's storage.
+ *
+ * NOTE!  The sections for the DECLARE and for the DEFINE must match, lest
+ * linkage errors occur due the compiler generating the wrong code to access
+ * that section.
+ */
+#define __PCPU_ATTRS(sec)						\
+	__percpu __attribute__((section(PER_CPU_BASE_SECTION sec)))	\
+	PER_CPU_ATTRIBUTES
+
+#define __PCPU_DUMMY_ATTRS						\
+	__attribute__((section(".discard"), unused))
+
+/*
+ * Macro which verifies @ptr is a percpu pointer without evaluating
+ * @ptr.  This is to be used in percpu accessors to verify that the
+ * input parameter is a percpu pointer.
+ */
+#define __verify_pcpu_ptr(ptr)	do {					\
+	const void __percpu *__vpp_verify = (typeof(ptr))NULL;		\
+	(void)__vpp_verify;						\
+} while (0)
+
+/*
+ * s390 and alpha modules require percpu variables to be defined as
+ * weak to force the compiler to generate GOT based external
+ * references for them.  This is necessary because percpu sections
+ * will be located outside of the usually addressable area.
+ *
+ * This definition puts the following two extra restrictions when
+ * defining percpu variables.
+ *
+ * 1. The symbol must be globally unique, even the static ones.
+ * 2. Static percpu variables cannot be defined inside a function.
+ *
+ * Archs which need weak percpu definitions should define
+ * ARCH_NEEDS_WEAK_PER_CPU in asm/percpu.h when necessary.
+ *
+ * To ensure that the generic code observes the above two
+ * restrictions, if CONFIG_DEBUG_FORCE_WEAK_PER_CPU is set weak
+ * definition is used for all cases.
+ */
+#if defined(ARCH_NEEDS_WEAK_PER_CPU) || defined(CONFIG_DEBUG_FORCE_WEAK_PER_CPU)
+/*
+ * __pcpu_scope_* dummy variable is used to enforce scope.  It
+ * receives the static modifier when it's used in front of
+ * DEFINE_PER_CPU() and will trigger build failure if
+ * DECLARE_PER_CPU() is used for the same variable.
+ *
+ * __pcpu_unique_* dummy variable is used to enforce symbol uniqueness
+ * such that hidden weak symbol collision, which will cause unrelated
+ * variables to share the same address, can be detected during build.
+ */
+#define DECLARE_PER_CPU_SECTION(type, name, sec)			\
+	extern __PCPU_DUMMY_ATTRS char __pcpu_scope_##name;		\
+	extern __PCPU_ATTRS(sec) __typeof__(type) name
+
+#define DEFINE_PER_CPU_SECTION(type, name, sec)				\
+	__PCPU_DUMMY_ATTRS char __pcpu_scope_##name;			\
+	extern __PCPU_DUMMY_ATTRS char __pcpu_unique_##name;		\
+	__PCPU_DUMMY_ATTRS char __pcpu_unique_##name;			\
+	__PCPU_ATTRS(sec) PER_CPU_DEF_ATTRIBUTES __weak			\
+	__typeof__(type) name
+#else
+/*
+ * Normal declaration and definition macros.
+ */
+#define DECLARE_PER_CPU_SECTION(type, name, sec)			\
+	extern __PCPU_ATTRS(sec) __typeof__(type) name
+
+#define DEFINE_PER_CPU_SECTION(type, name, sec)				\
+	__PCPU_ATTRS(sec) PER_CPU_DEF_ATTRIBUTES			\
+	__typeof__(type) name
+#endif
+
+/*
+ * Variant on the per-CPU variable declaration/definition theme used for
+ * ordinary per-CPU variables.
+ */
+#define DECLARE_PER_CPU(type, name)					\
+	DECLARE_PER_CPU_SECTION(type, name, "")
+
+#define DEFINE_PER_CPU(type, name)					\
+	DEFINE_PER_CPU_SECTION(type, name, "")
+
+/*
+ * Declaration/definition used for per-CPU variables that must come first in
+ * the set of variables.
+ */
+#define DECLARE_PER_CPU_FIRST(type, name)				\
+	DECLARE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION)
+
+#define DEFINE_PER_CPU_FIRST(type, name)				\
+	DEFINE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION)
+
+/*
+ * Declaration/definition used for per-CPU variables that must be cacheline
+ * aligned under SMP conditions so that, whilst a particular instance of the
+ * data corresponds to a particular CPU, inefficiencies due to direct access by
+ * other CPUs are reduced by preventing the data from unnecessarily spanning
+ * cachelines.
+ *
+ * An example of this would be statistical data, where each CPU's set of data
+ * is updated by that CPU alone, but the data from across all CPUs is collated
+ * by a CPU processing a read from a proc file.
+ */
+#define DECLARE_PER_CPU_SHARED_ALIGNED(type, name)			\
+	DECLARE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \
+	____cacheline_aligned_in_smp
+
+#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)			\
+	DEFINE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \
+	____cacheline_aligned_in_smp
+
+#define DECLARE_PER_CPU_ALIGNED(type, name)				\
+	DECLARE_PER_CPU_SECTION(type, name, PER_CPU_ALIGNED_SECTION)	\
+	____cacheline_aligned
+
+#define DEFINE_PER_CPU_ALIGNED(type, name)				\
+	DEFINE_PER_CPU_SECTION(type, name, PER_CPU_ALIGNED_SECTION)	\
+	____cacheline_aligned
+
+/*
+ * Declaration/definition used for per-CPU variables that must be page aligned.
+ */
+#define DECLARE_PER_CPU_PAGE_ALIGNED(type, name)			\
+	DECLARE_PER_CPU_SECTION(type, name, "..page_aligned")		\
+	__aligned(PAGE_SIZE)
+
+#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name)				\
+	DEFINE_PER_CPU_SECTION(type, name, "..page_aligned")		\
+	__aligned(PAGE_SIZE)
+
+/*
+ * Declaration/definition used for per-CPU variables that must be read mostly.
+ */
+#define DECLARE_PER_CPU_READ_MOSTLY(type, name)			\
+	DECLARE_PER_CPU_SECTION(type, name, "..readmostly")
+
+#define DEFINE_PER_CPU_READ_MOSTLY(type, name)				\
+	DEFINE_PER_CPU_SECTION(type, name, "..readmostly")
+
+/*
+ * Intermodule exports for per-CPU variables.  sparse forgets about
+ * address space across EXPORT_SYMBOL(), change EXPORT_SYMBOL() to
+ * noop if __CHECKER__.
+ */
+#ifndef __CHECKER__
+#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(var)
+#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(var)
+#else
+#define EXPORT_PER_CPU_SYMBOL(var)
+#define EXPORT_PER_CPU_SYMBOL_GPL(var)
+#endif
+
+#endif /* _LINUX_PERCPU_DEFS_H */
diff --git a/include/linux/percpu.h b/include/linux/percpu.h
new file mode 100644
index 00000000..21638ae1
--- /dev/null
+++ b/include/linux/percpu.h
@@ -0,0 +1,812 @@
+#ifndef __LINUX_PERCPU_H
+#define __LINUX_PERCPU_H
+
+#include <linux/preempt.h>
+#include <linux/smp.h>
+#include <linux/cpumask.h>
+#include <linux/pfn.h>
+#include <linux/init.h>
+
+#include <asm/percpu.h>
+
+/* enough to cover all DEFINE_PER_CPUs in modules */
+#ifdef CONFIG_MODULES
+#define PERCPU_MODULE_RESERVE		(8 << 10)
+#else
+#define PERCPU_MODULE_RESERVE		0
+#endif
+
+#ifndef PERCPU_ENOUGH_ROOM
+#define PERCPU_ENOUGH_ROOM						\
+	(ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES) +	\
+	 PERCPU_MODULE_RESERVE)
+#endif
+
+/*
+ * Must be an lvalue. Since @var must be a simple identifier,
+ * we force a syntax error here if it isn't.
+ */
+#define get_cpu_var(var) (*({				\
+	preempt_disable();				\
+	&__get_cpu_var(var); }))
+
+/*
+ * The weird & is necessary because sparse considers (void)(var) to be
+ * a direct dereference of percpu variable (var).
+ */
+#define put_cpu_var(var) do {				\
+	(void)&(var);					\
+	preempt_enable();				\
+} while (0)
+
+#define get_cpu_ptr(var) ({				\
+	preempt_disable();				\
+	this_cpu_ptr(var); })
+
+#define put_cpu_ptr(var) do {				\
+	(void)(var);					\
+	preempt_enable();				\
+} while (0)
+
+/* minimum unit size, also is the maximum supported allocation size */
+#define PCPU_MIN_UNIT_SIZE		PFN_ALIGN(32 << 10)
+
+/*
+ * Percpu allocator can serve percpu allocations before slab is
+ * initialized which allows slab to depend on the percpu allocator.
+ * The following two parameters decide how much resource to
+ * preallocate for this.  Keep PERCPU_DYNAMIC_RESERVE equal to or
+ * larger than PERCPU_DYNAMIC_EARLY_SIZE.
+ */
+#define PERCPU_DYNAMIC_EARLY_SLOTS	128
+#define PERCPU_DYNAMIC_EARLY_SIZE	(12 << 10)
+
+/*
+ * PERCPU_DYNAMIC_RESERVE indicates the amount of free area to piggy
+ * back on the first chunk for dynamic percpu allocation if arch is
+ * manually allocating and mapping it for faster access (as a part of
+ * large page mapping for example).
+ *
+ * The following values give between one and two pages of free space
+ * after typical minimal boot (2-way SMP, single disk and NIC) with
+ * both defconfig and a distro config on x86_64 and 32.  More
+ * intelligent way to determine this would be nice.
+ */
+#if BITS_PER_LONG > 32
+#define PERCPU_DYNAMIC_RESERVE		(20 << 10)
+#else
+#define PERCPU_DYNAMIC_RESERVE		(12 << 10)
+#endif
+
+extern void *pcpu_base_addr;
+extern const unsigned long *pcpu_unit_offsets;
+
+struct pcpu_group_info {
+	int			nr_units;	/* aligned # of units */
+	unsigned long		base_offset;	/* base address offset */
+	unsigned int		*cpu_map;	/* unit->cpu map, empty
+						 * entries contain NR_CPUS */
+};
+
+struct pcpu_alloc_info {
+	size_t			static_size;
+	size_t			reserved_size;
+	size_t			dyn_size;
+	size_t			unit_size;
+	size_t			atom_size;
+	size_t			alloc_size;
+	size_t			__ai_size;	/* internal, don't use */
+	int			nr_groups;	/* 0 if grouping unnecessary */
+	struct pcpu_group_info	groups[];
+};
+
+enum pcpu_fc {
+	PCPU_FC_AUTO,
+	PCPU_FC_EMBED,
+	PCPU_FC_PAGE,
+
+	PCPU_FC_NR,
+};
+extern const char *pcpu_fc_names[PCPU_FC_NR];
+
+extern enum pcpu_fc pcpu_chosen_fc;
+
+typedef void * (*pcpu_fc_alloc_fn_t)(unsigned int cpu, size_t size,
+				     size_t align);
+typedef void (*pcpu_fc_free_fn_t)(void *ptr, size_t size);
+typedef void (*pcpu_fc_populate_pte_fn_t)(unsigned long addr);
+typedef int (pcpu_fc_cpu_distance_fn_t)(unsigned int from, unsigned int to);
+
+extern struct pcpu_alloc_info * __init pcpu_alloc_alloc_info(int nr_groups,
+							     int nr_units);
+extern void __init pcpu_free_alloc_info(struct pcpu_alloc_info *ai);
+
+extern int __init pcpu_setup_first_chunk(const struct pcpu_alloc_info *ai,
+					 void *base_addr);
+
+#ifdef CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK
+extern int __init pcpu_embed_first_chunk(size_t reserved_size, size_t dyn_size,
+				size_t atom_size,
+				pcpu_fc_cpu_distance_fn_t cpu_distance_fn,
+				pcpu_fc_alloc_fn_t alloc_fn,
+				pcpu_fc_free_fn_t free_fn);
+#endif
+
+#ifdef CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK
+extern int __init pcpu_page_first_chunk(size_t reserved_size,
+				pcpu_fc_alloc_fn_t alloc_fn,
+				pcpu_fc_free_fn_t free_fn,
+				pcpu_fc_populate_pte_fn_t populate_pte_fn);
+#endif
+
+/*
+ * Use this to get to a cpu's version of the per-cpu object
+ * dynamically allocated. Non-atomic access to the current CPU's
+ * version should probably be combined with get_cpu()/put_cpu().
+ */
+#ifdef CONFIG_SMP
+#define per_cpu_ptr(ptr, cpu)	SHIFT_PERCPU_PTR((ptr), per_cpu_offset((cpu)))
+#else
+#define per_cpu_ptr(ptr, cpu)	({ (void)(cpu); VERIFY_PERCPU_PTR((ptr)); })
+#endif
+
+extern void __percpu *__alloc_reserved_percpu(size_t size, size_t align);
+extern bool is_kernel_percpu_address(unsigned long addr);
+
+#if !defined(CONFIG_SMP) || !defined(CONFIG_HAVE_SETUP_PER_CPU_AREA)
+extern void __init setup_per_cpu_areas(void);
+#endif
+extern void __init percpu_init_late(void);
+
+extern void __percpu *__alloc_percpu(size_t size, size_t align);
+extern void free_percpu(void __percpu *__pdata);
+extern phys_addr_t per_cpu_ptr_to_phys(void *addr);
+
+#define alloc_percpu(type)	\
+	(typeof(type) __percpu *)__alloc_percpu(sizeof(type), __alignof__(type))
+
+/*
+ * Optional methods for optimized non-lvalue per-cpu variable access.
+ *
+ * @var can be a percpu variable or a field of it and its size should
+ * equal char, int or long.  percpu_read() evaluates to a lvalue and
+ * all others to void.
+ *
+ * These operations are guaranteed to be atomic.
+ * The generic versions disable interrupts.  Archs are
+ * encouraged to implement single-instruction alternatives which don't
+ * require protection.
+ */
+#ifndef percpu_read
+# define percpu_read(var)						\
+  ({									\
+	typeof(var) *pr_ptr__ = &(var);					\
+	typeof(var) pr_ret__;						\
+	pr_ret__ = get_cpu_var(*pr_ptr__);				\
+	put_cpu_var(*pr_ptr__);						\
+	pr_ret__;							\
+  })
+#endif
+
+#define __percpu_generic_to_op(var, val, op)				\
+do {									\
+	typeof(var) *pgto_ptr__ = &(var);				\
+	get_cpu_var(*pgto_ptr__) op val;				\
+	put_cpu_var(*pgto_ptr__);					\
+} while (0)
+
+#ifndef percpu_write
+# define percpu_write(var, val)		__percpu_generic_to_op(var, (val), =)
+#endif
+
+#ifndef percpu_add
+# define percpu_add(var, val)		__percpu_generic_to_op(var, (val), +=)
+#endif
+
+#ifndef percpu_sub
+# define percpu_sub(var, val)		__percpu_generic_to_op(var, (val), -=)
+#endif
+
+#ifndef percpu_and
+# define percpu_and(var, val)		__percpu_generic_to_op(var, (val), &=)
+#endif
+
+#ifndef percpu_or
+# define percpu_or(var, val)		__percpu_generic_to_op(var, (val), |=)
+#endif
+
+#ifndef percpu_xor
+# define percpu_xor(var, val)		__percpu_generic_to_op(var, (val), ^=)
+#endif
+
+/*
+ * Branching function to split up a function into a set of functions that
+ * are called for different scalar sizes of the objects handled.
+ */
+
+extern void __bad_size_call_parameter(void);
+
+#define __pcpu_size_call_return(stem, variable)				\
+({	typeof(variable) pscr_ret__;					\
+	__verify_pcpu_ptr(&(variable));					\
+	switch(sizeof(variable)) {					\
+	case 1: pscr_ret__ = stem##1(variable);break;			\
+	case 2: pscr_ret__ = stem##2(variable);break;			\
+	case 4: pscr_ret__ = stem##4(variable);break;			\
+	case 8: pscr_ret__ = stem##8(variable);break;			\
+	default:							\
+		__bad_size_call_parameter();break;			\
+	}								\
+	pscr_ret__;							\
+})
+
+#define __pcpu_size_call_return2(stem, variable, ...)			\
+({									\
+	typeof(variable) pscr2_ret__;					\
+	__verify_pcpu_ptr(&(variable));					\
+	switch(sizeof(variable)) {					\
+	case 1: pscr2_ret__ = stem##1(variable, __VA_ARGS__); break;	\
+	case 2: pscr2_ret__ = stem##2(variable, __VA_ARGS__); break;	\
+	case 4: pscr2_ret__ = stem##4(variable, __VA_ARGS__); break;	\
+	case 8: pscr2_ret__ = stem##8(variable, __VA_ARGS__); break;	\
+	default:							\
+		__bad_size_call_parameter(); break;			\
+	}								\
+	pscr2_ret__;							\
+})
+
+/*
+ * Special handling for cmpxchg_double.  cmpxchg_double is passed two
+ * percpu variables.  The first has to be aligned to a double word
+ * boundary and the second has to follow directly thereafter.
+ * We enforce this on all architectures even if they don't support
+ * a double cmpxchg instruction, since it's a cheap requirement, and it
+ * avoids breaking the requirement for architectures with the instruction.
+ */
+#define __pcpu_double_call_return_bool(stem, pcp1, pcp2, ...)		\
+({									\
+	bool pdcrb_ret__;						\
+	__verify_pcpu_ptr(&pcp1);					\
+	BUILD_BUG_ON(sizeof(pcp1) != sizeof(pcp2));			\
+	VM_BUG_ON((unsigned long)(&pcp1) % (2 * sizeof(pcp1)));		\
+	VM_BUG_ON((unsigned long)(&pcp2) !=				\
+		  (unsigned long)(&pcp1) + sizeof(pcp1));		\
+	switch(sizeof(pcp1)) {						\
+	case 1: pdcrb_ret__ = stem##1(pcp1, pcp2, __VA_ARGS__); break;	\
+	case 2: pdcrb_ret__ = stem##2(pcp1, pcp2, __VA_ARGS__); break;	\
+	case 4: pdcrb_ret__ = stem##4(pcp1, pcp2, __VA_ARGS__); break;	\
+	case 8: pdcrb_ret__ = stem##8(pcp1, pcp2, __VA_ARGS__); break;	\
+	default:							\
+		__bad_size_call_parameter(); break;			\
+	}								\
+	pdcrb_ret__;							\
+})
+
+#define __pcpu_size_call(stem, variable, ...)				\
+do {									\
+	__verify_pcpu_ptr(&(variable));					\
+	switch(sizeof(variable)) {					\
+		case 1: stem##1(variable, __VA_ARGS__);break;		\
+		case 2: stem##2(variable, __VA_ARGS__);break;		\
+		case 4: stem##4(variable, __VA_ARGS__);break;		\
+		case 8: stem##8(variable, __VA_ARGS__);break;		\
+		default: 						\
+			__bad_size_call_parameter();break;		\
+	}								\
+} while (0)
+
+/*
+ * Optimized manipulation for memory allocated through the per cpu
+ * allocator or for addresses of per cpu variables.
+ *
+ * These operation guarantee exclusivity of access for other operations
+ * on the *same* processor. The assumption is that per cpu data is only
+ * accessed by a single processor instance (the current one).
+ *
+ * The first group is used for accesses that must be done in a
+ * preemption safe way since we know that the context is not preempt
+ * safe. Interrupts may occur. If the interrupt modifies the variable
+ * too then RMW actions will not be reliable.
+ *
+ * The arch code can provide optimized functions in two ways:
+ *
+ * 1. Override the function completely. F.e. define this_cpu_add().
+ *    The arch must then ensure that the various scalar format passed
+ *    are handled correctly.
+ *
+ * 2. Provide functions for certain scalar sizes. F.e. provide
+ *    this_cpu_add_2() to provide per cpu atomic operations for 2 byte
+ *    sized RMW actions. If arch code does not provide operations for
+ *    a scalar size then the fallback in the generic code will be
+ *    used.
+ */
+
+#define _this_cpu_generic_read(pcp)					\
+({	typeof(pcp) ret__;						\
+	preempt_disable();						\
+	ret__ = *this_cpu_ptr(&(pcp));					\
+	preempt_enable();						\
+	ret__;								\
+})
+
+#ifndef this_cpu_read
+# ifndef this_cpu_read_1
+#  define this_cpu_read_1(pcp)	_this_cpu_generic_read(pcp)
+# endif
+# ifndef this_cpu_read_2
+#  define this_cpu_read_2(pcp)	_this_cpu_generic_read(pcp)
+# endif
+# ifndef this_cpu_read_4
+#  define this_cpu_read_4(pcp)	_this_cpu_generic_read(pcp)
+# endif
+# ifndef this_cpu_read_8
+#  define this_cpu_read_8(pcp)	_this_cpu_generic_read(pcp)
+# endif
+# define this_cpu_read(pcp)	__pcpu_size_call_return(this_cpu_read_, (pcp))
+#endif
+
+#define _this_cpu_generic_to_op(pcp, val, op)				\
+do {									\
+	unsigned long flags;						\
+	raw_local_irq_save(flags);					\
+	*__this_cpu_ptr(&(pcp)) op val;					\
+	raw_local_irq_restore(flags);					\
+} while (0)
+
+#ifndef this_cpu_write
+# ifndef this_cpu_write_1
+#  define this_cpu_write_1(pcp, val)	_this_cpu_generic_to_op((pcp), (val), =)
+# endif
+# ifndef this_cpu_write_2
+#  define this_cpu_write_2(pcp, val)	_this_cpu_generic_to_op((pcp), (val), =)
+# endif
+# ifndef this_cpu_write_4
+#  define this_cpu_write_4(pcp, val)	_this_cpu_generic_to_op((pcp), (val), =)
+# endif
+# ifndef this_cpu_write_8
+#  define this_cpu_write_8(pcp, val)	_this_cpu_generic_to_op((pcp), (val), =)
+# endif
+# define this_cpu_write(pcp, val)	__pcpu_size_call(this_cpu_write_, (pcp), (val))
+#endif
+
+#ifndef this_cpu_add
+# ifndef this_cpu_add_1
+#  define this_cpu_add_1(pcp, val)	_this_cpu_generic_to_op((pcp), (val), +=)
+# endif
+# ifndef this_cpu_add_2
+#  define this_cpu_add_2(pcp, val)	_this_cpu_generic_to_op((pcp), (val), +=)
+# endif
+# ifndef this_cpu_add_4
+#  define this_cpu_add_4(pcp, val)	_this_cpu_generic_to_op((pcp), (val), +=)
+# endif
+# ifndef this_cpu_add_8
+#  define this_cpu_add_8(pcp, val)	_this_cpu_generic_to_op((pcp), (val), +=)
+# endif
+# define this_cpu_add(pcp, val)		__pcpu_size_call(this_cpu_add_, (pcp), (val))
+#endif
+
+#ifndef this_cpu_sub
+# define this_cpu_sub(pcp, val)		this_cpu_add((pcp), -(val))
+#endif
+
+#ifndef this_cpu_inc
+# define this_cpu_inc(pcp)		this_cpu_add((pcp), 1)
+#endif
+
+#ifndef this_cpu_dec
+# define this_cpu_dec(pcp)		this_cpu_sub((pcp), 1)
+#endif
+
+#ifndef this_cpu_and
+# ifndef this_cpu_and_1
+#  define this_cpu_and_1(pcp, val)	_this_cpu_generic_to_op((pcp), (val), &=)
+# endif
+# ifndef this_cpu_and_2
+#  define this_cpu_and_2(pcp, val)	_this_cpu_generic_to_op((pcp), (val), &=)
+# endif
+# ifndef this_cpu_and_4
+#  define this_cpu_and_4(pcp, val)	_this_cpu_generic_to_op((pcp), (val), &=)
+# endif
+# ifndef this_cpu_and_8
+#  define this_cpu_and_8(pcp, val)	_this_cpu_generic_to_op((pcp), (val), &=)
+# endif
+# define this_cpu_and(pcp, val)		__pcpu_size_call(this_cpu_and_, (pcp), (val))
+#endif
+
+#ifndef this_cpu_or
+# ifndef this_cpu_or_1
+#  define this_cpu_or_1(pcp, val)	_this_cpu_generic_to_op((pcp), (val), |=)
+# endif
+# ifndef this_cpu_or_2
+#  define this_cpu_or_2(pcp, val)	_this_cpu_generic_to_op((pcp), (val), |=)
+# endif
+# ifndef this_cpu_or_4
+#  define this_cpu_or_4(pcp, val)	_this_cpu_generic_to_op((pcp), (val), |=)
+# endif
+# ifndef this_cpu_or_8
+#  define this_cpu_or_8(pcp, val)	_this_cpu_generic_to_op((pcp), (val), |=)
+# endif
+# define this_cpu_or(pcp, val)		__pcpu_size_call(this_cpu_or_, (pcp), (val))
+#endif
+
+#ifndef this_cpu_xor
+# ifndef this_cpu_xor_1
+#  define this_cpu_xor_1(pcp, val)	_this_cpu_generic_to_op((pcp), (val), ^=)
+# endif
+# ifndef this_cpu_xor_2
+#  define this_cpu_xor_2(pcp, val)	_this_cpu_generic_to_op((pcp), (val), ^=)
+# endif
+# ifndef this_cpu_xor_4
+#  define this_cpu_xor_4(pcp, val)	_this_cpu_generic_to_op((pcp), (val), ^=)
+# endif
+# ifndef this_cpu_xor_8
+#  define this_cpu_xor_8(pcp, val)	_this_cpu_generic_to_op((pcp), (val), ^=)
+# endif
+# define this_cpu_xor(pcp, val)		__pcpu_size_call(this_cpu_or_, (pcp), (val))
+#endif
+
+#define _this_cpu_generic_add_return(pcp, val)				\
+({									\
+	typeof(pcp) ret__;						\
+	unsigned long flags;						\
+	raw_local_irq_save(flags);					\
+	__this_cpu_add(pcp, val);					\
+	ret__ = __this_cpu_read(pcp);					\
+	raw_local_irq_restore(flags);					\
+	ret__;								\
+})
+
+#ifndef this_cpu_add_return
+# ifndef this_cpu_add_return_1
+#  define this_cpu_add_return_1(pcp, val)	_this_cpu_generic_add_return(pcp, val)
+# endif
+# ifndef this_cpu_add_return_2
+#  define this_cpu_add_return_2(pcp, val)	_this_cpu_generic_add_return(pcp, val)
+# endif
+# ifndef this_cpu_add_return_4
+#  define this_cpu_add_return_4(pcp, val)	_this_cpu_generic_add_return(pcp, val)
+# endif
+# ifndef this_cpu_add_return_8
+#  define this_cpu_add_return_8(pcp, val)	_this_cpu_generic_add_return(pcp, val)
+# endif
+# define this_cpu_add_return(pcp, val)	__pcpu_size_call_return2(this_cpu_add_return_, pcp, val)
+#endif
+
+#define this_cpu_sub_return(pcp, val)	this_cpu_add_return(pcp, -(val))
+#define this_cpu_inc_return(pcp)	this_cpu_add_return(pcp, 1)
+#define this_cpu_dec_return(pcp)	this_cpu_add_return(pcp, -1)
+
+#define _this_cpu_generic_xchg(pcp, nval)				\
+({	typeof(pcp) ret__;						\
+	unsigned long flags;						\
+	raw_local_irq_save(flags);					\
+	ret__ = __this_cpu_read(pcp);					\
+	__this_cpu_write(pcp, nval);					\
+	raw_local_irq_restore(flags);					\
+	ret__;								\
+})
+
+#ifndef this_cpu_xchg
+# ifndef this_cpu_xchg_1
+#  define this_cpu_xchg_1(pcp, nval)	_this_cpu_generic_xchg(pcp, nval)
+# endif
+# ifndef this_cpu_xchg_2
+#  define this_cpu_xchg_2(pcp, nval)	_this_cpu_generic_xchg(pcp, nval)
+# endif
+# ifndef this_cpu_xchg_4
+#  define this_cpu_xchg_4(pcp, nval)	_this_cpu_generic_xchg(pcp, nval)
+# endif
+# ifndef this_cpu_xchg_8
+#  define this_cpu_xchg_8(pcp, nval)	_this_cpu_generic_xchg(pcp, nval)
+# endif
+# define this_cpu_xchg(pcp, nval)	\
+	__pcpu_size_call_return2(this_cpu_xchg_, (pcp), nval)
+#endif
+
+#define _this_cpu_generic_cmpxchg(pcp, oval, nval)			\
+({									\
+	typeof(pcp) ret__;						\
+	unsigned long flags;						\
+	raw_local_irq_save(flags);					\
+	ret__ = __this_cpu_read(pcp);					\
+	if (ret__ == (oval))						\
+		__this_cpu_write(pcp, nval);				\
+	raw_local_irq_restore(flags);					\
+	ret__;								\
+})
+
+#ifndef this_cpu_cmpxchg
+# ifndef this_cpu_cmpxchg_1
+#  define this_cpu_cmpxchg_1(pcp, oval, nval)	_this_cpu_generic_cmpxchg(pcp, oval, nval)
+# endif
+# ifndef this_cpu_cmpxchg_2
+#  define this_cpu_cmpxchg_2(pcp, oval, nval)	_this_cpu_generic_cmpxchg(pcp, oval, nval)
+# endif
+# ifndef this_cpu_cmpxchg_4
+#  define this_cpu_cmpxchg_4(pcp, oval, nval)	_this_cpu_generic_cmpxchg(pcp, oval, nval)
+# endif
+# ifndef this_cpu_cmpxchg_8
+#  define this_cpu_cmpxchg_8(pcp, oval, nval)	_this_cpu_generic_cmpxchg(pcp, oval, nval)
+# endif
+# define this_cpu_cmpxchg(pcp, oval, nval)	\
+	__pcpu_size_call_return2(this_cpu_cmpxchg_, pcp, oval, nval)
+#endif
+
+/*
+ * cmpxchg_double replaces two adjacent scalars at once.  The first
+ * two parameters are per cpu variables which have to be of the same
+ * size.  A truth value is returned to indicate success or failure
+ * (since a double register result is difficult to handle).  There is
+ * very limited hardware support for these operations, so only certain
+ * sizes may work.
+ */
+#define _this_cpu_generic_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)	\
+({									\
+	int ret__;							\
+	unsigned long flags;						\
+	raw_local_irq_save(flags);					\
+	ret__ = __this_cpu_generic_cmpxchg_double(pcp1, pcp2,		\
+			oval1, oval2, nval1, nval2);			\
+	raw_local_irq_restore(flags);					\
+	ret__;								\
+})
+
+#ifndef this_cpu_cmpxchg_double
+# ifndef this_cpu_cmpxchg_double_1
+#  define this_cpu_cmpxchg_double_1(pcp1, pcp2, oval1, oval2, nval1, nval2)	\
+	_this_cpu_generic_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)
+# endif
+# ifndef this_cpu_cmpxchg_double_2
+#  define this_cpu_cmpxchg_double_2(pcp1, pcp2, oval1, oval2, nval1, nval2)	\
+	_this_cpu_generic_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)
+# endif
+# ifndef this_cpu_cmpxchg_double_4
+#  define this_cpu_cmpxchg_double_4(pcp1, pcp2, oval1, oval2, nval1, nval2)	\
+	_this_cpu_generic_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)
+# endif
+# ifndef this_cpu_cmpxchg_double_8
+#  define this_cpu_cmpxchg_double_8(pcp1, pcp2, oval1, oval2, nval1, nval2)	\
+	_this_cpu_generic_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)
+# endif
+# define this_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)	\
+	__pcpu_double_call_return_bool(this_cpu_cmpxchg_double_, (pcp1), (pcp2), (oval1), (oval2), (nval1), (nval2))
+#endif
+
+/*
+ * Generic percpu operations for context that are safe from preemption/interrupts.
+ * Either we do not care about races or the caller has the
+ * responsibility of handling preemption/interrupt issues. Arch code can still
+ * override these instructions since the arch per cpu code may be more
+ * efficient and may actually get race freeness for free (that is the
+ * case for x86 for example).
+ *
+ * If there is no other protection through preempt disable and/or
+ * disabling interupts then one of these RMW operations can show unexpected
+ * behavior because the execution thread was rescheduled on another processor
+ * or an interrupt occurred and the same percpu variable was modified from
+ * the interrupt context.
+ */
+#ifndef __this_cpu_read
+# ifndef __this_cpu_read_1
+#  define __this_cpu_read_1(pcp)	(*__this_cpu_ptr(&(pcp)))
+# endif
+# ifndef __this_cpu_read_2
+#  define __this_cpu_read_2(pcp)	(*__this_cpu_ptr(&(pcp)))
+# endif
+# ifndef __this_cpu_read_4
+#  define __this_cpu_read_4(pcp)	(*__this_cpu_ptr(&(pcp)))
+# endif
+# ifndef __this_cpu_read_8
+#  define __this_cpu_read_8(pcp)	(*__this_cpu_ptr(&(pcp)))
+# endif
+# define __this_cpu_read(pcp)	__pcpu_size_call_return(__this_cpu_read_, (pcp))
+#endif
+
+#define __this_cpu_generic_to_op(pcp, val, op)				\
+do {									\
+	*__this_cpu_ptr(&(pcp)) op val;					\
+} while (0)
+
+#ifndef __this_cpu_write
+# ifndef __this_cpu_write_1
+#  define __this_cpu_write_1(pcp, val)	__this_cpu_generic_to_op((pcp), (val), =)
+# endif
+# ifndef __this_cpu_write_2
+#  define __this_cpu_write_2(pcp, val)	__this_cpu_generic_to_op((pcp), (val), =)
+# endif
+# ifndef __this_cpu_write_4
+#  define __this_cpu_write_4(pcp, val)	__this_cpu_generic_to_op((pcp), (val), =)
+# endif
+# ifndef __this_cpu_write_8
+#  define __this_cpu_write_8(pcp, val)	__this_cpu_generic_to_op((pcp), (val), =)
+# endif
+# define __this_cpu_write(pcp, val)	__pcpu_size_call(__this_cpu_write_, (pcp), (val))
+#endif
+
+#ifndef __this_cpu_add
+# ifndef __this_cpu_add_1
+#  define __this_cpu_add_1(pcp, val)	__this_cpu_generic_to_op((pcp), (val), +=)
+# endif
+# ifndef __this_cpu_add_2
+#  define __this_cpu_add_2(pcp, val)	__this_cpu_generic_to_op((pcp), (val), +=)
+# endif
+# ifndef __this_cpu_add_4
+#  define __this_cpu_add_4(pcp, val)	__this_cpu_generic_to_op((pcp), (val), +=)
+# endif
+# ifndef __this_cpu_add_8
+#  define __this_cpu_add_8(pcp, val)	__this_cpu_generic_to_op((pcp), (val), +=)
+# endif
+# define __this_cpu_add(pcp, val)	__pcpu_size_call(__this_cpu_add_, (pcp), (val))
+#endif
+
+#ifndef __this_cpu_sub
+# define __this_cpu_sub(pcp, val)	__this_cpu_add((pcp), -(val))
+#endif
+
+#ifndef __this_cpu_inc
+# define __this_cpu_inc(pcp)		__this_cpu_add((pcp), 1)
+#endif
+
+#ifndef __this_cpu_dec
+# define __this_cpu_dec(pcp)		__this_cpu_sub((pcp), 1)
+#endif
+
+#ifndef __this_cpu_and
+# ifndef __this_cpu_and_1
+#  define __this_cpu_and_1(pcp, val)	__this_cpu_generic_to_op((pcp), (val), &=)
+# endif
+# ifndef __this_cpu_and_2
+#  define __this_cpu_and_2(pcp, val)	__this_cpu_generic_to_op((pcp), (val), &=)
+# endif
+# ifndef __this_cpu_and_4
+#  define __this_cpu_and_4(pcp, val)	__this_cpu_generic_to_op((pcp), (val), &=)
+# endif
+# ifndef __this_cpu_and_8
+#  define __this_cpu_and_8(pcp, val)	__this_cpu_generic_to_op((pcp), (val), &=)
+# endif
+# define __this_cpu_and(pcp, val)	__pcpu_size_call(__this_cpu_and_, (pcp), (val))
+#endif
+
+#ifndef __this_cpu_or
+# ifndef __this_cpu_or_1
+#  define __this_cpu_or_1(pcp, val)	__this_cpu_generic_to_op((pcp), (val), |=)
+# endif
+# ifndef __this_cpu_or_2
+#  define __this_cpu_or_2(pcp, val)	__this_cpu_generic_to_op((pcp), (val), |=)
+# endif
+# ifndef __this_cpu_or_4
+#  define __this_cpu_or_4(pcp, val)	__this_cpu_generic_to_op((pcp), (val), |=)
+# endif
+# ifndef __this_cpu_or_8
+#  define __this_cpu_or_8(pcp, val)	__this_cpu_generic_to_op((pcp), (val), |=)
+# endif
+# define __this_cpu_or(pcp, val)	__pcpu_size_call(__this_cpu_or_, (pcp), (val))
+#endif
+
+#ifndef __this_cpu_xor
+# ifndef __this_cpu_xor_1
+#  define __this_cpu_xor_1(pcp, val)	__this_cpu_generic_to_op((pcp), (val), ^=)
+# endif
+# ifndef __this_cpu_xor_2
+#  define __this_cpu_xor_2(pcp, val)	__this_cpu_generic_to_op((pcp), (val), ^=)
+# endif
+# ifndef __this_cpu_xor_4
+#  define __this_cpu_xor_4(pcp, val)	__this_cpu_generic_to_op((pcp), (val), ^=)
+# endif
+# ifndef __this_cpu_xor_8
+#  define __this_cpu_xor_8(pcp, val)	__this_cpu_generic_to_op((pcp), (val), ^=)
+# endif
+# define __this_cpu_xor(pcp, val)	__pcpu_size_call(__this_cpu_xor_, (pcp), (val))
+#endif
+
+#define __this_cpu_generic_add_return(pcp, val)				\
+({									\
+	__this_cpu_add(pcp, val);					\
+	__this_cpu_read(pcp);						\
+})
+
+#ifndef __this_cpu_add_return
+# ifndef __this_cpu_add_return_1
+#  define __this_cpu_add_return_1(pcp, val)	__this_cpu_generic_add_return(pcp, val)
+# endif
+# ifndef __this_cpu_add_return_2
+#  define __this_cpu_add_return_2(pcp, val)	__this_cpu_generic_add_return(pcp, val)
+# endif
+# ifndef __this_cpu_add_return_4
+#  define __this_cpu_add_return_4(pcp, val)	__this_cpu_generic_add_return(pcp, val)
+# endif
+# ifndef __this_cpu_add_return_8
+#  define __this_cpu_add_return_8(pcp, val)	__this_cpu_generic_add_return(pcp, val)
+# endif
+# define __this_cpu_add_return(pcp, val)	\
+	__pcpu_size_call_return2(__this_cpu_add_return_, pcp, val)
+#endif
+
+#define __this_cpu_sub_return(pcp, val)	__this_cpu_add_return(pcp, -(val))
+#define __this_cpu_inc_return(pcp)	__this_cpu_add_return(pcp, 1)
+#define __this_cpu_dec_return(pcp)	__this_cpu_add_return(pcp, -1)
+
+#define __this_cpu_generic_xchg(pcp, nval)				\
+({	typeof(pcp) ret__;						\
+	ret__ = __this_cpu_read(pcp);					\
+	__this_cpu_write(pcp, nval);					\
+	ret__;								\
+})
+
+#ifndef __this_cpu_xchg
+# ifndef __this_cpu_xchg_1
+#  define __this_cpu_xchg_1(pcp, nval)	__this_cpu_generic_xchg(pcp, nval)
+# endif
+# ifndef __this_cpu_xchg_2
+#  define __this_cpu_xchg_2(pcp, nval)	__this_cpu_generic_xchg(pcp, nval)
+# endif
+# ifndef __this_cpu_xchg_4
+#  define __this_cpu_xchg_4(pcp, nval)	__this_cpu_generic_xchg(pcp, nval)
+# endif
+# ifndef __this_cpu_xchg_8
+#  define __this_cpu_xchg_8(pcp, nval)	__this_cpu_generic_xchg(pcp, nval)
+# endif
+# define __this_cpu_xchg(pcp, nval)	\
+	__pcpu_size_call_return2(__this_cpu_xchg_, (pcp), nval)
+#endif
+
+#define __this_cpu_generic_cmpxchg(pcp, oval, nval)			\
+({									\
+	typeof(pcp) ret__;						\
+	ret__ = __this_cpu_read(pcp);					\
+	if (ret__ == (oval))						\
+		__this_cpu_write(pcp, nval);				\
+	ret__;								\
+})
+
+#ifndef __this_cpu_cmpxchg
+# ifndef __this_cpu_cmpxchg_1
+#  define __this_cpu_cmpxchg_1(pcp, oval, nval)	__this_cpu_generic_cmpxchg(pcp, oval, nval)
+# endif
+# ifndef __this_cpu_cmpxchg_2
+#  define __this_cpu_cmpxchg_2(pcp, oval, nval)	__this_cpu_generic_cmpxchg(pcp, oval, nval)
+# endif
+# ifndef __this_cpu_cmpxchg_4
+#  define __this_cpu_cmpxchg_4(pcp, oval, nval)	__this_cpu_generic_cmpxchg(pcp, oval, nval)
+# endif
+# ifndef __this_cpu_cmpxchg_8
+#  define __this_cpu_cmpxchg_8(pcp, oval, nval)	__this_cpu_generic_cmpxchg(pcp, oval, nval)
+# endif
+# define __this_cpu_cmpxchg(pcp, oval, nval)	\
+	__pcpu_size_call_return2(__this_cpu_cmpxchg_, pcp, oval, nval)
+#endif
+
+#define __this_cpu_generic_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)	\
+({									\
+	int __ret = 0;							\
+	if (__this_cpu_read(pcp1) == (oval1) &&				\
+			 __this_cpu_read(pcp2)  == (oval2)) {		\
+		__this_cpu_write(pcp1, (nval1));			\
+		__this_cpu_write(pcp2, (nval2));			\
+		__ret = 1;						\
+	}								\
+	(__ret);							\
+})
+
+#ifndef __this_cpu_cmpxchg_double
+# ifndef __this_cpu_cmpxchg_double_1
+#  define __this_cpu_cmpxchg_double_1(pcp1, pcp2, oval1, oval2, nval1, nval2)	\
+	__this_cpu_generic_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)
+# endif
+# ifndef __this_cpu_cmpxchg_double_2
+#  define __this_cpu_cmpxchg_double_2(pcp1, pcp2, oval1, oval2, nval1, nval2)	\
+	__this_cpu_generic_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)
+# endif
+# ifndef __this_cpu_cmpxchg_double_4
+#  define __this_cpu_cmpxchg_double_4(pcp1, pcp2, oval1, oval2, nval1, nval2)	\
+	__this_cpu_generic_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)
+# endif
+# ifndef __this_cpu_cmpxchg_double_8
+#  define __this_cpu_cmpxchg_double_8(pcp1, pcp2, oval1, oval2, nval1, nval2)	\
+	__this_cpu_generic_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)
+# endif
+# define __this_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)	\
+	__pcpu_double_call_return_bool(__this_cpu_cmpxchg_double_, (pcp1), (pcp2), (oval1), (oval2), (nval1), (nval2))
+#endif
+
+#endif /* __LINUX_PERCPU_H */
diff --git a/include/linux/percpu_counter.h b/include/linux/percpu_counter.h
new file mode 100644
index 00000000..b9df9ed1
--- /dev/null
+++ b/include/linux/percpu_counter.h
@@ -0,0 +1,177 @@
+#ifndef _LINUX_PERCPU_COUNTER_H
+#define _LINUX_PERCPU_COUNTER_H
+/*
+ * A simple "approximate counter" for use in ext2 and ext3 superblocks.
+ *
+ * WARNING: these things are HUGE.  4 kbytes per counter on 32-way P4.
+ */
+
+#include <linux/spinlock.h>
+#include <linux/smp.h>
+#include <linux/list.h>
+#include <linux/threads.h>
+#include <linux/percpu.h>
+#include <linux/types.h>
+
+#ifdef CONFIG_SMP
+
+struct percpu_counter {
+	raw_spinlock_t lock;
+	s64 count;
+#ifdef CONFIG_HOTPLUG_CPU
+	struct list_head list;	/* All percpu_counters are on a list */
+#endif
+	s32 __percpu *counters;
+};
+
+extern int percpu_counter_batch;
+
+int __percpu_counter_init(struct percpu_counter *fbc, s64 amount,
+			  struct lock_class_key *key);
+
+#define percpu_counter_init(fbc, value)					\
+	({								\
+		static struct lock_class_key __key;			\
+									\
+		__percpu_counter_init(fbc, value, &__key);		\
+	})
+
+void percpu_counter_destroy(struct percpu_counter *fbc);
+void percpu_counter_set(struct percpu_counter *fbc, s64 amount);
+void __percpu_counter_add(struct percpu_counter *fbc, s64 amount, s32 batch);
+s64 __percpu_counter_sum(struct percpu_counter *fbc);
+int percpu_counter_compare(struct percpu_counter *fbc, s64 rhs);
+
+static inline void percpu_counter_add(struct percpu_counter *fbc, s64 amount)
+{
+	__percpu_counter_add(fbc, amount, percpu_counter_batch);
+}
+
+static inline s64 percpu_counter_sum_positive(struct percpu_counter *fbc)
+{
+	s64 ret = __percpu_counter_sum(fbc);
+	return ret < 0 ? 0 : ret;
+}
+
+static inline s64 percpu_counter_sum(struct percpu_counter *fbc)
+{
+	return __percpu_counter_sum(fbc);
+}
+
+static inline s64 percpu_counter_read(struct percpu_counter *fbc)
+{
+	return fbc->count;
+}
+
+/*
+ * It is possible for the percpu_counter_read() to return a small negative
+ * number for some counter which should never be negative.
+ *
+ */
+static inline s64 percpu_counter_read_positive(struct percpu_counter *fbc)
+{
+	s64 ret = fbc->count;
+
+	barrier();		/* Prevent reloads of fbc->count */
+	if (ret >= 0)
+		return ret;
+	return 0;
+}
+
+static inline int percpu_counter_initialized(struct percpu_counter *fbc)
+{
+	return (fbc->counters != NULL);
+}
+
+#else
+
+struct percpu_counter {
+	s64 count;
+};
+
+static inline int percpu_counter_init(struct percpu_counter *fbc, s64 amount)
+{
+	fbc->count = amount;
+	return 0;
+}
+
+static inline void percpu_counter_destroy(struct percpu_counter *fbc)
+{
+}
+
+static inline void percpu_counter_set(struct percpu_counter *fbc, s64 amount)
+{
+	fbc->count = amount;
+}
+
+static inline int percpu_counter_compare(struct percpu_counter *fbc, s64 rhs)
+{
+	if (fbc->count > rhs)
+		return 1;
+	else if (fbc->count < rhs)
+		return -1;
+	else
+		return 0;
+}
+
+static inline void
+percpu_counter_add(struct percpu_counter *fbc, s64 amount)
+{
+	preempt_disable();
+	fbc->count += amount;
+	preempt_enable();
+}
+
+static inline void
+__percpu_counter_add(struct percpu_counter *fbc, s64 amount, s32 batch)
+{
+	percpu_counter_add(fbc, amount);
+}
+
+static inline s64 percpu_counter_read(struct percpu_counter *fbc)
+{
+	return fbc->count;
+}
+
+/*
+ * percpu_counter is intended to track positive numbers. In the UP case the
+ * number should never be negative.
+ */
+static inline s64 percpu_counter_read_positive(struct percpu_counter *fbc)
+{
+	return fbc->count;
+}
+
+static inline s64 percpu_counter_sum_positive(struct percpu_counter *fbc)
+{
+	return percpu_counter_read_positive(fbc);
+}
+
+static inline s64 percpu_counter_sum(struct percpu_counter *fbc)
+{
+	return percpu_counter_read(fbc);
+}
+
+static inline int percpu_counter_initialized(struct percpu_counter *fbc)
+{
+	return 1;
+}
+
+#endif	/* CONFIG_SMP */
+
+static inline void percpu_counter_inc(struct percpu_counter *fbc)
+{
+	percpu_counter_add(fbc, 1);
+}
+
+static inline void percpu_counter_dec(struct percpu_counter *fbc)
+{
+	percpu_counter_add(fbc, -1);
+}
+
+static inline void percpu_counter_sub(struct percpu_counter *fbc, s64 amount)
+{
+	percpu_counter_add(fbc, -amount);
+}
+
+#endif /* _LINUX_PERCPU_COUNTER_H */
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
new file mode 100644
index 00000000..ddbb6a90
--- /dev/null
+++ b/include/linux/perf_event.h
@@ -0,0 +1,1365 @@
+/*
+ * Performance events:
+ *
+ *    Copyright (C) 2008-2009, Thomas Gleixner <tglx@linutronix.de>
+ *    Copyright (C) 2008-2011, Red Hat, Inc., Ingo Molnar
+ *    Copyright (C) 2008-2011, Red Hat, Inc., Peter Zijlstra
+ *
+ * Data type definitions, declarations, prototypes.
+ *
+ *    Started by: Thomas Gleixner and Ingo Molnar
+ *
+ * For licencing details see kernel-base/COPYING
+ */
+#ifndef _LINUX_PERF_EVENT_H
+#define _LINUX_PERF_EVENT_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+#include <asm/byteorder.h>
+
+/*
+ * User-space ABI bits:
+ */
+
+/*
+ * attr.type
+ */
+enum perf_type_id {
+	PERF_TYPE_HARDWARE			= 0,
+	PERF_TYPE_SOFTWARE			= 1,
+	PERF_TYPE_TRACEPOINT			= 2,
+	PERF_TYPE_HW_CACHE			= 3,
+	PERF_TYPE_RAW				= 4,
+	PERF_TYPE_BREAKPOINT			= 5,
+
+	PERF_TYPE_MAX,				/* non-ABI */
+};
+
+/*
+ * Generalized performance event event_id types, used by the
+ * attr.event_id parameter of the sys_perf_event_open()
+ * syscall:
+ */
+enum perf_hw_id {
+	/*
+	 * Common hardware events, generalized by the kernel:
+	 */
+	PERF_COUNT_HW_CPU_CYCLES		= 0,
+	PERF_COUNT_HW_INSTRUCTIONS		= 1,
+	PERF_COUNT_HW_CACHE_REFERENCES		= 2,
+	PERF_COUNT_HW_CACHE_MISSES		= 3,
+	PERF_COUNT_HW_BRANCH_INSTRUCTIONS	= 4,
+	PERF_COUNT_HW_BRANCH_MISSES		= 5,
+	PERF_COUNT_HW_BUS_CYCLES		= 6,
+	PERF_COUNT_HW_STALLED_CYCLES_FRONTEND	= 7,
+	PERF_COUNT_HW_STALLED_CYCLES_BACKEND	= 8,
+	PERF_COUNT_HW_REF_CPU_CYCLES		= 9,
+
+	PERF_COUNT_HW_MAX,			/* non-ABI */
+};
+
+/*
+ * Generalized hardware cache events:
+ *
+ *       { L1-D, L1-I, LLC, ITLB, DTLB, BPU, NODE } x
+ *       { read, write, prefetch } x
+ *       { accesses, misses }
+ */
+enum perf_hw_cache_id {
+	PERF_COUNT_HW_CACHE_L1D			= 0,
+	PERF_COUNT_HW_CACHE_L1I			= 1,
+	PERF_COUNT_HW_CACHE_LL			= 2,
+	PERF_COUNT_HW_CACHE_DTLB		= 3,
+	PERF_COUNT_HW_CACHE_ITLB		= 4,
+	PERF_COUNT_HW_CACHE_BPU			= 5,
+	PERF_COUNT_HW_CACHE_NODE		= 6,
+
+	PERF_COUNT_HW_CACHE_MAX,		/* non-ABI */
+};
+
+enum perf_hw_cache_op_id {
+	PERF_COUNT_HW_CACHE_OP_READ		= 0,
+	PERF_COUNT_HW_CACHE_OP_WRITE		= 1,
+	PERF_COUNT_HW_CACHE_OP_PREFETCH		= 2,
+
+	PERF_COUNT_HW_CACHE_OP_MAX,		/* non-ABI */
+};
+
+enum perf_hw_cache_op_result_id {
+	PERF_COUNT_HW_CACHE_RESULT_ACCESS	= 0,
+	PERF_COUNT_HW_CACHE_RESULT_MISS		= 1,
+
+	PERF_COUNT_HW_CACHE_RESULT_MAX,		/* non-ABI */
+};
+
+/*
+ * Special "software" events provided by the kernel, even if the hardware
+ * does not support performance events. These events measure various
+ * physical and sw events of the kernel (and allow the profiling of them as
+ * well):
+ */
+enum perf_sw_ids {
+	PERF_COUNT_SW_CPU_CLOCK			= 0,
+	PERF_COUNT_SW_TASK_CLOCK		= 1,
+	PERF_COUNT_SW_PAGE_FAULTS		= 2,
+	PERF_COUNT_SW_CONTEXT_SWITCHES		= 3,
+	PERF_COUNT_SW_CPU_MIGRATIONS		= 4,
+	PERF_COUNT_SW_PAGE_FAULTS_MIN		= 5,
+	PERF_COUNT_SW_PAGE_FAULTS_MAJ		= 6,
+	PERF_COUNT_SW_ALIGNMENT_FAULTS		= 7,
+	PERF_COUNT_SW_EMULATION_FAULTS		= 8,
+
+	PERF_COUNT_SW_MAX,			/* non-ABI */
+};
+
+/*
+ * Bits that can be set in attr.sample_type to request information
+ * in the overflow packets.
+ */
+enum perf_event_sample_format {
+	PERF_SAMPLE_IP				= 1U << 0,
+	PERF_SAMPLE_TID				= 1U << 1,
+	PERF_SAMPLE_TIME			= 1U << 2,
+	PERF_SAMPLE_ADDR			= 1U << 3,
+	PERF_SAMPLE_READ			= 1U << 4,
+	PERF_SAMPLE_CALLCHAIN			= 1U << 5,
+	PERF_SAMPLE_ID				= 1U << 6,
+	PERF_SAMPLE_CPU				= 1U << 7,
+	PERF_SAMPLE_PERIOD			= 1U << 8,
+	PERF_SAMPLE_STREAM_ID			= 1U << 9,
+	PERF_SAMPLE_RAW				= 1U << 10,
+	PERF_SAMPLE_BRANCH_STACK		= 1U << 11,
+
+	PERF_SAMPLE_MAX = 1U << 12,		/* non-ABI */
+};
+
+/*
+ * values to program into branch_sample_type when PERF_SAMPLE_BRANCH is set
+ *
+ * If the user does not pass priv level information via branch_sample_type,
+ * the kernel uses the event's priv level. Branch and event priv levels do
+ * not have to match. Branch priv level is checked for permissions.
+ *
+ * The branch types can be combined, however BRANCH_ANY covers all types
+ * of branches and therefore it supersedes all the other types.
+ */
+enum perf_branch_sample_type {
+	PERF_SAMPLE_BRANCH_USER		= 1U << 0, /* user branches */
+	PERF_SAMPLE_BRANCH_KERNEL	= 1U << 1, /* kernel branches */
+	PERF_SAMPLE_BRANCH_HV		= 1U << 2, /* hypervisor branches */
+
+	PERF_SAMPLE_BRANCH_ANY		= 1U << 3, /* any branch types */
+	PERF_SAMPLE_BRANCH_ANY_CALL	= 1U << 4, /* any call branch */
+	PERF_SAMPLE_BRANCH_ANY_RETURN	= 1U << 5, /* any return branch */
+	PERF_SAMPLE_BRANCH_IND_CALL	= 1U << 6, /* indirect calls */
+
+	PERF_SAMPLE_BRANCH_MAX		= 1U << 7, /* non-ABI */
+};
+
+#define PERF_SAMPLE_BRANCH_PLM_ALL \
+	(PERF_SAMPLE_BRANCH_USER|\
+	 PERF_SAMPLE_BRANCH_KERNEL|\
+	 PERF_SAMPLE_BRANCH_HV)
+
+/*
+ * The format of the data returned by read() on a perf event fd,
+ * as specified by attr.read_format:
+ *
+ * struct read_format {
+ *	{ u64		value;
+ *	  { u64		time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED
+ *	  { u64		time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
+ *	  { u64		id;           } && PERF_FORMAT_ID
+ *	} && !PERF_FORMAT_GROUP
+ *
+ *	{ u64		nr;
+ *	  { u64		time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED
+ *	  { u64		time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
+ *	  { u64		value;
+ *	    { u64	id;           } && PERF_FORMAT_ID
+ *	  }		cntr[nr];
+ *	} && PERF_FORMAT_GROUP
+ * };
+ */
+enum perf_event_read_format {
+	PERF_FORMAT_TOTAL_TIME_ENABLED		= 1U << 0,
+	PERF_FORMAT_TOTAL_TIME_RUNNING		= 1U << 1,
+	PERF_FORMAT_ID				= 1U << 2,
+	PERF_FORMAT_GROUP			= 1U << 3,
+
+	PERF_FORMAT_MAX = 1U << 4,		/* non-ABI */
+};
+
+#define PERF_ATTR_SIZE_VER0	64	/* sizeof first published struct */
+#define PERF_ATTR_SIZE_VER1	72	/* add: config2 */
+#define PERF_ATTR_SIZE_VER2	80	/* add: branch_sample_type */
+
+/*
+ * Hardware event_id to monitor via a performance monitoring event:
+ */
+struct perf_event_attr {
+
+	/*
+	 * Major type: hardware/software/tracepoint/etc.
+	 */
+	__u32			type;
+
+	/*
+	 * Size of the attr structure, for fwd/bwd compat.
+	 */
+	__u32			size;
+
+	/*
+	 * Type specific configuration information.
+	 */
+	__u64			config;
+
+	union {
+		__u64		sample_period;
+		__u64		sample_freq;
+	};
+
+	__u64			sample_type;
+	__u64			read_format;
+
+	__u64			disabled       :  1, /* off by default        */
+				inherit	       :  1, /* children inherit it   */
+				pinned	       :  1, /* must always be on PMU */
+				exclusive      :  1, /* only group on PMU     */
+				exclude_user   :  1, /* don't count user      */
+				exclude_kernel :  1, /* ditto kernel          */
+				exclude_hv     :  1, /* ditto hypervisor      */
+				exclude_idle   :  1, /* don't count when idle */
+				mmap           :  1, /* include mmap data     */
+				comm	       :  1, /* include comm data     */
+				freq           :  1, /* use freq, not period  */
+				inherit_stat   :  1, /* per task counts       */
+				enable_on_exec :  1, /* next exec enables     */
+				task           :  1, /* trace fork/exit       */
+				watermark      :  1, /* wakeup_watermark      */
+				/*
+				 * precise_ip:
+				 *
+				 *  0 - SAMPLE_IP can have arbitrary skid
+				 *  1 - SAMPLE_IP must have constant skid
+				 *  2 - SAMPLE_IP requested to have 0 skid
+				 *  3 - SAMPLE_IP must have 0 skid
+				 *
+				 *  See also PERF_RECORD_MISC_EXACT_IP
+				 */
+				precise_ip     :  2, /* skid constraint       */
+				mmap_data      :  1, /* non-exec mmap data    */
+				sample_id_all  :  1, /* sample_type all events */
+
+				exclude_host   :  1, /* don't count in host   */
+				exclude_guest  :  1, /* don't count in guest  */
+
+				__reserved_1   : 43;
+
+	union {
+		__u32		wakeup_events;	  /* wakeup every n events */
+		__u32		wakeup_watermark; /* bytes before wakeup   */
+	};
+
+	__u32			bp_type;
+	union {
+		__u64		bp_addr;
+		__u64		config1; /* extension of config */
+	};
+	union {
+		__u64		bp_len;
+		__u64		config2; /* extension of config1 */
+	};
+	__u64	branch_sample_type; /* enum branch_sample_type */
+};
+
+/*
+ * Ioctls that can be done on a perf event fd:
+ */
+#define PERF_EVENT_IOC_ENABLE		_IO ('$', 0)
+#define PERF_EVENT_IOC_DISABLE		_IO ('$', 1)
+#define PERF_EVENT_IOC_REFRESH		_IO ('$', 2)
+#define PERF_EVENT_IOC_RESET		_IO ('$', 3)
+#define PERF_EVENT_IOC_PERIOD		_IOW('$', 4, __u64)
+#define PERF_EVENT_IOC_SET_OUTPUT	_IO ('$', 5)
+#define PERF_EVENT_IOC_SET_FILTER	_IOW('$', 6, char *)
+
+enum perf_event_ioc_flags {
+	PERF_IOC_FLAG_GROUP		= 1U << 0,
+};
+
+/*
+ * Structure of the page that can be mapped via mmap
+ */
+struct perf_event_mmap_page {
+	__u32	version;		/* version number of this structure */
+	__u32	compat_version;		/* lowest version this is compat with */
+
+	/*
+	 * Bits needed to read the hw events in user-space.
+	 *
+	 *   u32 seq, time_mult, time_shift, idx, width;
+	 *   u64 count, enabled, running;
+	 *   u64 cyc, time_offset;
+	 *   s64 pmc = 0;
+	 *
+	 *   do {
+	 *     seq = pc->lock;
+	 *     barrier()
+	 *
+	 *     enabled = pc->time_enabled;
+	 *     running = pc->time_running;
+	 *
+	 *     if (pc->cap_usr_time && enabled != running) {
+	 *       cyc = rdtsc();
+	 *       time_offset = pc->time_offset;
+	 *       time_mult   = pc->time_mult;
+	 *       time_shift  = pc->time_shift;
+	 *     }
+	 *
+	 *     idx = pc->index;
+	 *     count = pc->offset;
+	 *     if (pc->cap_usr_rdpmc && idx) {
+	 *       width = pc->pmc_width;
+	 *       pmc = rdpmc(idx - 1);
+	 *     }
+	 *
+	 *     barrier();
+	 *   } while (pc->lock != seq);
+	 *
+	 * NOTE: for obvious reason this only works on self-monitoring
+	 *       processes.
+	 */
+	__u32	lock;			/* seqlock for synchronization */
+	__u32	index;			/* hardware event identifier */
+	__s64	offset;			/* add to hardware event value */
+	__u64	time_enabled;		/* time event active */
+	__u64	time_running;		/* time event on cpu */
+	union {
+		__u64	capabilities;
+		__u64	cap_usr_time  : 1,
+			cap_usr_rdpmc : 1,
+			cap_____res   : 62;
+	};
+
+	/*
+	 * If cap_usr_rdpmc this field provides the bit-width of the value
+	 * read using the rdpmc() or equivalent instruction. This can be used
+	 * to sign extend the result like:
+	 *
+	 *   pmc <<= 64 - width;
+	 *   pmc >>= 64 - width; // signed shift right
+	 *   count += pmc;
+	 */
+	__u16	pmc_width;
+
+	/*
+	 * If cap_usr_time the below fields can be used to compute the time
+	 * delta since time_enabled (in ns) using rdtsc or similar.
+	 *
+	 *   u64 quot, rem;
+	 *   u64 delta;
+	 *
+	 *   quot = (cyc >> time_shift);
+	 *   rem = cyc & ((1 << time_shift) - 1);
+	 *   delta = time_offset + quot * time_mult +
+	 *              ((rem * time_mult) >> time_shift);
+	 *
+	 * Where time_offset,time_mult,time_shift and cyc are read in the
+	 * seqcount loop described above. This delta can then be added to
+	 * enabled and possible running (if idx), improving the scaling:
+	 *
+	 *   enabled += delta;
+	 *   if (idx)
+	 *     running += delta;
+	 *
+	 *   quot = count / running;
+	 *   rem  = count % running;
+	 *   count = quot * enabled + (rem * enabled) / running;
+	 */
+	__u16	time_shift;
+	__u32	time_mult;
+	__u64	time_offset;
+
+		/*
+		 * Hole for extension of the self monitor capabilities
+		 */
+
+	__u64	__reserved[120];	/* align to 1k */
+
+	/*
+	 * Control data for the mmap() data buffer.
+	 *
+	 * User-space reading the @data_head value should issue an rmb(), on
+	 * SMP capable platforms, after reading this value -- see
+	 * perf_event_wakeup().
+	 *
+	 * When the mapping is PROT_WRITE the @data_tail value should be
+	 * written by userspace to reflect the last read data. In this case
+	 * the kernel will not over-write unread data.
+	 */
+	__u64   data_head;		/* head in the data section */
+	__u64	data_tail;		/* user-space written tail */
+};
+
+#define PERF_RECORD_MISC_CPUMODE_MASK		(7 << 0)
+#define PERF_RECORD_MISC_CPUMODE_UNKNOWN	(0 << 0)
+#define PERF_RECORD_MISC_KERNEL			(1 << 0)
+#define PERF_RECORD_MISC_USER			(2 << 0)
+#define PERF_RECORD_MISC_HYPERVISOR		(3 << 0)
+#define PERF_RECORD_MISC_GUEST_KERNEL		(4 << 0)
+#define PERF_RECORD_MISC_GUEST_USER		(5 << 0)
+
+/*
+ * Indicates that the content of PERF_SAMPLE_IP points to
+ * the actual instruction that triggered the event. See also
+ * perf_event_attr::precise_ip.
+ */
+#define PERF_RECORD_MISC_EXACT_IP		(1 << 14)
+/*
+ * Reserve the last bit to indicate some extended misc field
+ */
+#define PERF_RECORD_MISC_EXT_RESERVED		(1 << 15)
+
+struct perf_event_header {
+	__u32	type;
+	__u16	misc;
+	__u16	size;
+};
+
+enum perf_event_type {
+
+	/*
+	 * If perf_event_attr.sample_id_all is set then all event types will
+	 * have the sample_type selected fields related to where/when
+	 * (identity) an event took place (TID, TIME, ID, CPU, STREAM_ID)
+	 * described in PERF_RECORD_SAMPLE below, it will be stashed just after
+	 * the perf_event_header and the fields already present for the existing
+	 * fields, i.e. at the end of the payload. That way a newer perf.data
+	 * file will be supported by older perf tools, with these new optional
+	 * fields being ignored.
+	 *
+	 * The MMAP events record the PROT_EXEC mappings so that we can
+	 * correlate userspace IPs to code. They have the following structure:
+	 *
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *
+	 *	u32				pid, tid;
+	 *	u64				addr;
+	 *	u64				len;
+	 *	u64				pgoff;
+	 *	char				filename[];
+	 * };
+	 */
+	PERF_RECORD_MMAP			= 1,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u64				id;
+	 *	u64				lost;
+	 * };
+	 */
+	PERF_RECORD_LOST			= 2,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *
+	 *	u32				pid, tid;
+	 *	char				comm[];
+	 * };
+	 */
+	PERF_RECORD_COMM			= 3,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u32				pid, ppid;
+	 *	u32				tid, ptid;
+	 *	u64				time;
+	 * };
+	 */
+	PERF_RECORD_EXIT			= 4,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u64				time;
+	 *	u64				id;
+	 *	u64				stream_id;
+	 * };
+	 */
+	PERF_RECORD_THROTTLE			= 5,
+	PERF_RECORD_UNTHROTTLE			= 6,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u32				pid, ppid;
+	 *	u32				tid, ptid;
+	 *	u64				time;
+	 * };
+	 */
+	PERF_RECORD_FORK			= 7,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u32				pid, tid;
+	 *
+	 *	struct read_format		values;
+	 * };
+	 */
+	PERF_RECORD_READ			= 8,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *
+	 *	{ u64			ip;	  } && PERF_SAMPLE_IP
+	 *	{ u32			pid, tid; } && PERF_SAMPLE_TID
+	 *	{ u64			time;     } && PERF_SAMPLE_TIME
+	 *	{ u64			addr;     } && PERF_SAMPLE_ADDR
+	 *	{ u64			id;	  } && PERF_SAMPLE_ID
+	 *	{ u64			stream_id;} && PERF_SAMPLE_STREAM_ID
+	 *	{ u32			cpu, res; } && PERF_SAMPLE_CPU
+	 *	{ u64			period;   } && PERF_SAMPLE_PERIOD
+	 *
+	 *	{ struct read_format	values;	  } && PERF_SAMPLE_READ
+	 *
+	 *	{ u64			nr,
+	 *	  u64			ips[nr];  } && PERF_SAMPLE_CALLCHAIN
+	 *
+	 *	#
+	 *	# The RAW record below is opaque data wrt the ABI
+	 *	#
+	 *	# That is, the ABI doesn't make any promises wrt to
+	 *	# the stability of its content, it may vary depending
+	 *	# on event, hardware, kernel version and phase of
+	 *	# the moon.
+	 *	#
+	 *	# In other words, PERF_SAMPLE_RAW contents are not an ABI.
+	 *	#
+	 *
+	 *	{ u32			size;
+	 *	  char                  data[size];}&& PERF_SAMPLE_RAW
+	 *
+	 *	{ u64 from, to, flags } lbr[nr];} && PERF_SAMPLE_BRANCH_STACK
+	 * };
+	 */
+	PERF_RECORD_SAMPLE			= 9,
+
+	PERF_RECORD_MAX,			/* non-ABI */
+};
+
+enum perf_callchain_context {
+	PERF_CONTEXT_HV			= (__u64)-32,
+	PERF_CONTEXT_KERNEL		= (__u64)-128,
+	PERF_CONTEXT_USER		= (__u64)-512,
+
+	PERF_CONTEXT_GUEST		= (__u64)-2048,
+	PERF_CONTEXT_GUEST_KERNEL	= (__u64)-2176,
+	PERF_CONTEXT_GUEST_USER		= (__u64)-2560,
+
+	PERF_CONTEXT_MAX		= (__u64)-4095,
+};
+
+#define PERF_FLAG_FD_NO_GROUP		(1U << 0)
+#define PERF_FLAG_FD_OUTPUT		(1U << 1)
+#define PERF_FLAG_PID_CGROUP		(1U << 2) /* pid=cgroup id, per-cpu mode only */
+
+#ifdef __KERNEL__
+/*
+ * Kernel-internal data types and definitions:
+ */
+
+#ifdef CONFIG_PERF_EVENTS
+# include <linux/cgroup.h>
+# include <asm/perf_event.h>
+# include <asm/local64.h>
+#endif
+
+struct perf_guest_info_callbacks {
+	int				(*is_in_guest)(void);
+	int				(*is_user_mode)(void);
+	unsigned long			(*get_guest_ip)(void);
+};
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+#include <asm/hw_breakpoint.h>
+#endif
+
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/rculist.h>
+#include <linux/rcupdate.h>
+#include <linux/spinlock.h>
+#include <linux/hrtimer.h>
+#include <linux/fs.h>
+#include <linux/pid_namespace.h>
+#include <linux/workqueue.h>
+#include <linux/ftrace.h>
+#include <linux/cpu.h>
+#include <linux/irq_work.h>
+#include <linux/static_key.h>
+#include <linux/atomic.h>
+#include <linux/sysfs.h>
+#include <asm/local.h>
+
+#define PERF_MAX_STACK_DEPTH		255
+
+struct perf_callchain_entry {
+	__u64				nr;
+	__u64				ip[PERF_MAX_STACK_DEPTH];
+};
+
+struct perf_raw_record {
+	u32				size;
+	void				*data;
+};
+
+/*
+ * single taken branch record layout:
+ *
+ *      from: source instruction (may not always be a branch insn)
+ *        to: branch target
+ *   mispred: branch target was mispredicted
+ * predicted: branch target was predicted
+ *
+ * support for mispred, predicted is optional. In case it
+ * is not supported mispred = predicted = 0.
+ */
+struct perf_branch_entry {
+	__u64	from;
+	__u64	to;
+	__u64	mispred:1,  /* target mispredicted */
+		predicted:1,/* target predicted */
+		reserved:62;
+};
+
+/*
+ * branch stack layout:
+ *  nr: number of taken branches stored in entries[]
+ *
+ * Note that nr can vary from sample to sample
+ * branches (to, from) are stored from most recent
+ * to least recent, i.e., entries[0] contains the most
+ * recent branch.
+ */
+struct perf_branch_stack {
+	__u64				nr;
+	struct perf_branch_entry	entries[0];
+};
+
+struct task_struct;
+
+/*
+ * extra PMU register associated with an event
+ */
+struct hw_perf_event_extra {
+	u64		config;	/* register value */
+	unsigned int	reg;	/* register address or index */
+	int		alloc;	/* extra register already allocated */
+	int		idx;	/* index in shared_regs->regs[] */
+};
+
+/**
+ * struct hw_perf_event - performance event hardware details:
+ */
+struct hw_perf_event {
+#ifdef CONFIG_PERF_EVENTS
+	union {
+		struct { /* hardware */
+			u64		config;
+			u64		last_tag;
+			unsigned long	config_base;
+			unsigned long	event_base;
+			int		idx;
+			int		last_cpu;
+
+			struct hw_perf_event_extra extra_reg;
+			struct hw_perf_event_extra branch_reg;
+		};
+		struct { /* software */
+			struct hrtimer	hrtimer;
+		};
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+		struct { /* breakpoint */
+			struct arch_hw_breakpoint	info;
+			struct list_head		bp_list;
+			/*
+			 * Crufty hack to avoid the chicken and egg
+			 * problem hw_breakpoint has with context
+			 * creation and event initalization.
+			 */
+			struct task_struct		*bp_target;
+		};
+#endif
+	};
+	int				state;
+	local64_t			prev_count;
+	u64				sample_period;
+	u64				last_period;
+	local64_t			period_left;
+	u64                             interrupts_seq;
+	u64				interrupts;
+
+	u64				freq_time_stamp;
+	u64				freq_count_stamp;
+#endif
+};
+
+/*
+ * hw_perf_event::state flags
+ */
+#define PERF_HES_STOPPED	0x01 /* the counter is stopped */
+#define PERF_HES_UPTODATE	0x02 /* event->count up-to-date */
+#define PERF_HES_ARCH		0x04
+
+struct perf_event;
+
+/*
+ * Common implementation detail of pmu::{start,commit,cancel}_txn
+ */
+#define PERF_EVENT_TXN 0x1
+
+/**
+ * struct pmu - generic performance monitoring unit
+ */
+struct pmu {
+	struct list_head		entry;
+
+	struct device			*dev;
+	const struct attribute_group	**attr_groups;
+	char				*name;
+	int				type;
+
+	int * __percpu			pmu_disable_count;
+	struct perf_cpu_context * __percpu pmu_cpu_context;
+	int				task_ctx_nr;
+
+	/*
+	 * Fully disable/enable this PMU, can be used to protect from the PMI
+	 * as well as for lazy/batch writing of the MSRs.
+	 */
+	void (*pmu_enable)		(struct pmu *pmu); /* optional */
+	void (*pmu_disable)		(struct pmu *pmu); /* optional */
+
+	/*
+	 * Try and initialize the event for this PMU.
+	 * Should return -ENOENT when the @event doesn't match this PMU.
+	 */
+	int (*event_init)		(struct perf_event *event);
+
+#define PERF_EF_START	0x01		/* start the counter when adding    */
+#define PERF_EF_RELOAD	0x02		/* reload the counter when starting */
+#define PERF_EF_UPDATE	0x04		/* update the counter when stopping */
+
+	/*
+	 * Adds/Removes a counter to/from the PMU, can be done inside
+	 * a transaction, see the ->*_txn() methods.
+	 */
+	int  (*add)			(struct perf_event *event, int flags);
+	void (*del)			(struct perf_event *event, int flags);
+
+	/*
+	 * Starts/Stops a counter present on the PMU. The PMI handler
+	 * should stop the counter when perf_event_overflow() returns
+	 * !0. ->start() will be used to continue.
+	 */
+	void (*start)			(struct perf_event *event, int flags);
+	void (*stop)			(struct perf_event *event, int flags);
+
+	/*
+	 * Updates the counter value of the event.
+	 */
+	void (*read)			(struct perf_event *event);
+
+	/*
+	 * Group events scheduling is treated as a transaction, add
+	 * group events as a whole and perform one schedulability test.
+	 * If the test fails, roll back the whole group
+	 *
+	 * Start the transaction, after this ->add() doesn't need to
+	 * do schedulability tests.
+	 */
+	void (*start_txn)		(struct pmu *pmu); /* optional */
+	/*
+	 * If ->start_txn() disabled the ->add() schedulability test
+	 * then ->commit_txn() is required to perform one. On success
+	 * the transaction is closed. On error the transaction is kept
+	 * open until ->cancel_txn() is called.
+	 */
+	int  (*commit_txn)		(struct pmu *pmu); /* optional */
+	/*
+	 * Will cancel the transaction, assumes ->del() is called
+	 * for each successful ->add() during the transaction.
+	 */
+	void (*cancel_txn)		(struct pmu *pmu); /* optional */
+
+	/*
+	 * Will return the value for perf_event_mmap_page::index for this event,
+	 * if no implementation is provided it will default to: event->hw.idx + 1.
+	 */
+	int (*event_idx)		(struct perf_event *event); /*optional */
+
+	/*
+	 * flush branch stack on context-switches (needed in cpu-wide mode)
+	 */
+	void (*flush_branch_stack)	(void);
+};
+
+/**
+ * enum perf_event_active_state - the states of a event
+ */
+enum perf_event_active_state {
+	PERF_EVENT_STATE_ERROR		= -2,
+	PERF_EVENT_STATE_OFF		= -1,
+	PERF_EVENT_STATE_INACTIVE	=  0,
+	PERF_EVENT_STATE_ACTIVE		=  1,
+};
+
+struct file;
+struct perf_sample_data;
+
+typedef void (*perf_overflow_handler_t)(struct perf_event *,
+					struct perf_sample_data *,
+					struct pt_regs *regs);
+
+enum perf_group_flag {
+	PERF_GROUP_SOFTWARE		= 0x1,
+};
+
+#define SWEVENT_HLIST_BITS		8
+#define SWEVENT_HLIST_SIZE		(1 << SWEVENT_HLIST_BITS)
+
+struct swevent_hlist {
+	struct hlist_head		heads[SWEVENT_HLIST_SIZE];
+	struct rcu_head			rcu_head;
+};
+
+#define PERF_ATTACH_CONTEXT	0x01
+#define PERF_ATTACH_GROUP	0x02
+#define PERF_ATTACH_TASK	0x04
+
+#ifdef CONFIG_CGROUP_PERF
+/*
+ * perf_cgroup_info keeps track of time_enabled for a cgroup.
+ * This is a per-cpu dynamically allocated data structure.
+ */
+struct perf_cgroup_info {
+	u64				time;
+	u64				timestamp;
+};
+
+struct perf_cgroup {
+	struct				cgroup_subsys_state css;
+	struct				perf_cgroup_info *info;	/* timing info, one per cpu */
+};
+#endif
+
+struct ring_buffer;
+
+/**
+ * struct perf_event - performance event kernel representation:
+ */
+struct perf_event {
+#ifdef CONFIG_PERF_EVENTS
+	struct list_head		group_entry;
+	struct list_head		event_entry;
+	struct list_head		sibling_list;
+	struct hlist_node		hlist_entry;
+	int				nr_siblings;
+	int				group_flags;
+	struct perf_event		*group_leader;
+	struct pmu			*pmu;
+
+	enum perf_event_active_state	state;
+	unsigned int			attach_state;
+	local64_t			count;
+	atomic64_t			child_count;
+
+	/*
+	 * These are the total time in nanoseconds that the event
+	 * has been enabled (i.e. eligible to run, and the task has
+	 * been scheduled in, if this is a per-task event)
+	 * and running (scheduled onto the CPU), respectively.
+	 *
+	 * They are computed from tstamp_enabled, tstamp_running and
+	 * tstamp_stopped when the event is in INACTIVE or ACTIVE state.
+	 */
+	u64				total_time_enabled;
+	u64				total_time_running;
+
+	/*
+	 * These are timestamps used for computing total_time_enabled
+	 * and total_time_running when the event is in INACTIVE or
+	 * ACTIVE state, measured in nanoseconds from an arbitrary point
+	 * in time.
+	 * tstamp_enabled: the notional time when the event was enabled
+	 * tstamp_running: the notional time when the event was scheduled on
+	 * tstamp_stopped: in INACTIVE state, the notional time when the
+	 *	event was scheduled off.
+	 */
+	u64				tstamp_enabled;
+	u64				tstamp_running;
+	u64				tstamp_stopped;
+
+	/*
+	 * timestamp shadows the actual context timing but it can
+	 * be safely used in NMI interrupt context. It reflects the
+	 * context time as it was when the event was last scheduled in.
+	 *
+	 * ctx_time already accounts for ctx->timestamp. Therefore to
+	 * compute ctx_time for a sample, simply add perf_clock().
+	 */
+	u64				shadow_ctx_time;
+
+	struct perf_event_attr		attr;
+	u16				header_size;
+	u16				id_header_size;
+	u16				read_size;
+	struct hw_perf_event		hw;
+
+	struct perf_event_context	*ctx;
+	struct file			*filp;
+
+	/*
+	 * These accumulate total time (in nanoseconds) that children
+	 * events have been enabled and running, respectively.
+	 */
+	atomic64_t			child_total_time_enabled;
+	atomic64_t			child_total_time_running;
+
+	/*
+	 * Protect attach/detach and child_list:
+	 */
+	struct mutex			child_mutex;
+	struct list_head		child_list;
+	struct perf_event		*parent;
+
+	int				oncpu;
+	int				cpu;
+
+	struct list_head		owner_entry;
+	struct task_struct		*owner;
+
+	/* mmap bits */
+	struct mutex			mmap_mutex;
+	atomic_t			mmap_count;
+	int				mmap_locked;
+	struct user_struct		*mmap_user;
+	struct ring_buffer		*rb;
+	struct list_head		rb_entry;
+
+	/* poll related */
+	wait_queue_head_t		waitq;
+	struct fasync_struct		*fasync;
+
+	/* delayed work for NMIs and such */
+	int				pending_wakeup;
+	int				pending_kill;
+	int				pending_disable;
+	struct irq_work			pending;
+
+	atomic_t			event_limit;
+
+	void (*destroy)(struct perf_event *);
+	struct rcu_head			rcu_head;
+
+	struct pid_namespace		*ns;
+	u64				id;
+
+	perf_overflow_handler_t		overflow_handler;
+	void				*overflow_handler_context;
+
+#ifdef CONFIG_EVENT_TRACING
+	struct ftrace_event_call	*tp_event;
+	struct event_filter		*filter;
+#ifdef CONFIG_FUNCTION_TRACER
+	struct ftrace_ops               ftrace_ops;
+#endif
+#endif
+
+#ifdef CONFIG_CGROUP_PERF
+	struct perf_cgroup		*cgrp; /* cgroup event is attach to */
+	int				cgrp_defer_enabled;
+#endif
+
+#endif /* CONFIG_PERF_EVENTS */
+};
+
+enum perf_event_context_type {
+	task_context,
+	cpu_context,
+};
+
+/**
+ * struct perf_event_context - event context structure
+ *
+ * Used as a container for task events and CPU events as well:
+ */
+struct perf_event_context {
+	struct pmu			*pmu;
+	enum perf_event_context_type	type;
+	/*
+	 * Protect the states of the events in the list,
+	 * nr_active, and the list:
+	 */
+	raw_spinlock_t			lock;
+	/*
+	 * Protect the list of events.  Locking either mutex or lock
+	 * is sufficient to ensure the list doesn't change; to change
+	 * the list you need to lock both the mutex and the spinlock.
+	 */
+	struct mutex			mutex;
+
+	struct list_head		pinned_groups;
+	struct list_head		flexible_groups;
+	struct list_head		event_list;
+	int				nr_events;
+	int				nr_active;
+	int				is_active;
+	int				nr_stat;
+	int				nr_freq;
+	int				rotate_disable;
+	atomic_t			refcount;
+	struct task_struct		*task;
+
+	/*
+	 * Context clock, runs when context enabled.
+	 */
+	u64				time;
+	u64				timestamp;
+
+	/*
+	 * These fields let us detect when two contexts have both
+	 * been cloned (inherited) from a common ancestor.
+	 */
+	struct perf_event_context	*parent_ctx;
+	u64				parent_gen;
+	u64				generation;
+	int				pin_count;
+	int				nr_cgroups;	 /* cgroup evts */
+	int				nr_branch_stack; /* branch_stack evt */
+	struct rcu_head			rcu_head;
+};
+
+/*
+ * Number of contexts where an event can trigger:
+ *	task, softirq, hardirq, nmi.
+ */
+#define PERF_NR_CONTEXTS	4
+
+/**
+ * struct perf_event_cpu_context - per cpu event context structure
+ */
+struct perf_cpu_context {
+	struct perf_event_context	ctx;
+	struct perf_event_context	*task_ctx;
+	int				active_oncpu;
+	int				exclusive;
+	struct list_head		rotation_list;
+	int				jiffies_interval;
+	struct pmu			*active_pmu;
+	struct perf_cgroup		*cgrp;
+};
+
+struct perf_output_handle {
+	struct perf_event		*event;
+	struct ring_buffer		*rb;
+	unsigned long			wakeup;
+	unsigned long			size;
+	void				*addr;
+	int				page;
+};
+
+#ifdef CONFIG_PERF_EVENTS
+
+extern int perf_pmu_register(struct pmu *pmu, char *name, int type);
+extern void perf_pmu_unregister(struct pmu *pmu);
+
+extern int perf_num_counters(void);
+extern const char *perf_pmu_name(void);
+extern void __perf_event_task_sched_in(struct task_struct *prev,
+				       struct task_struct *task);
+extern void __perf_event_task_sched_out(struct task_struct *prev,
+					struct task_struct *next);
+extern int perf_event_init_task(struct task_struct *child);
+extern void perf_event_exit_task(struct task_struct *child);
+extern void perf_event_free_task(struct task_struct *task);
+extern void perf_event_delayed_put(struct task_struct *task);
+extern void perf_event_print_debug(void);
+extern void perf_pmu_disable(struct pmu *pmu);
+extern void perf_pmu_enable(struct pmu *pmu);
+extern int perf_event_task_disable(void);
+extern int perf_event_task_enable(void);
+extern int perf_event_refresh(struct perf_event *event, int refresh);
+extern void perf_event_update_userpage(struct perf_event *event);
+extern int perf_event_release_kernel(struct perf_event *event);
+extern struct perf_event *
+perf_event_create_kernel_counter(struct perf_event_attr *attr,
+				int cpu,
+				struct task_struct *task,
+				perf_overflow_handler_t callback,
+				void *context);
+extern u64 perf_event_read_value(struct perf_event *event,
+				 u64 *enabled, u64 *running);
+
+
+struct perf_sample_data {
+	u64				type;
+
+	u64				ip;
+	struct {
+		u32	pid;
+		u32	tid;
+	}				tid_entry;
+	u64				time;
+	u64				addr;
+	u64				id;
+	u64				stream_id;
+	struct {
+		u32	cpu;
+		u32	reserved;
+	}				cpu_entry;
+	u64				period;
+	struct perf_callchain_entry	*callchain;
+	struct perf_raw_record		*raw;
+	struct perf_branch_stack	*br_stack;
+};
+
+static inline void perf_sample_data_init(struct perf_sample_data *data, u64 addr)
+{
+	data->addr = addr;
+	data->raw  = NULL;
+	data->br_stack = NULL;
+}
+
+extern void perf_output_sample(struct perf_output_handle *handle,
+			       struct perf_event_header *header,
+			       struct perf_sample_data *data,
+			       struct perf_event *event);
+extern void perf_prepare_sample(struct perf_event_header *header,
+				struct perf_sample_data *data,
+				struct perf_event *event,
+				struct pt_regs *regs);
+
+extern int perf_event_overflow(struct perf_event *event,
+				 struct perf_sample_data *data,
+				 struct pt_regs *regs);
+
+static inline bool is_sampling_event(struct perf_event *event)
+{
+	return event->attr.sample_period != 0;
+}
+
+/*
+ * Return 1 for a software event, 0 for a hardware event
+ */
+static inline int is_software_event(struct perf_event *event)
+{
+	return event->pmu->task_ctx_nr == perf_sw_context;
+}
+
+extern struct static_key perf_swevent_enabled[PERF_COUNT_SW_MAX];
+
+extern void __perf_sw_event(u32, u64, struct pt_regs *, u64);
+
+#ifndef perf_arch_fetch_caller_regs
+static inline void perf_arch_fetch_caller_regs(struct pt_regs *regs, unsigned long ip) { }
+#endif
+
+/*
+ * Take a snapshot of the regs. Skip ip and frame pointer to
+ * the nth caller. We only need a few of the regs:
+ * - ip for PERF_SAMPLE_IP
+ * - cs for user_mode() tests
+ * - bp for callchains
+ * - eflags, for future purposes, just in case
+ */
+static inline void perf_fetch_caller_regs(struct pt_regs *regs)
+{
+	memset(regs, 0, sizeof(*regs));
+
+	perf_arch_fetch_caller_regs(regs, CALLER_ADDR0);
+}
+
+static __always_inline void
+perf_sw_event(u32 event_id, u64 nr, struct pt_regs *regs, u64 addr)
+{
+	struct pt_regs hot_regs;
+
+	if (static_key_false(&perf_swevent_enabled[event_id])) {
+		if (!regs) {
+			perf_fetch_caller_regs(&hot_regs);
+			regs = &hot_regs;
+		}
+		__perf_sw_event(event_id, nr, regs, addr);
+	}
+}
+
+extern struct static_key_deferred perf_sched_events;
+
+static inline void perf_event_task_sched_in(struct task_struct *prev,
+					    struct task_struct *task)
+{
+	if (static_key_false(&perf_sched_events.key))
+		__perf_event_task_sched_in(prev, task);
+}
+
+static inline void perf_event_task_sched_out(struct task_struct *prev,
+					     struct task_struct *next)
+{
+	perf_sw_event(PERF_COUNT_SW_CONTEXT_SWITCHES, 1, NULL, 0);
+
+	if (static_key_false(&perf_sched_events.key))
+		__perf_event_task_sched_out(prev, next);
+}
+
+extern void perf_event_mmap(struct vm_area_struct *vma);
+extern struct perf_guest_info_callbacks *perf_guest_cbs;
+extern int perf_register_guest_info_callbacks(struct perf_guest_info_callbacks *callbacks);
+extern int perf_unregister_guest_info_callbacks(struct perf_guest_info_callbacks *callbacks);
+
+extern void perf_event_comm(struct task_struct *tsk);
+extern void perf_event_fork(struct task_struct *tsk);
+
+/* Callchains */
+DECLARE_PER_CPU(struct perf_callchain_entry, perf_callchain_entry);
+
+extern void perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs);
+extern void perf_callchain_kernel(struct perf_callchain_entry *entry, struct pt_regs *regs);
+
+static inline void perf_callchain_store(struct perf_callchain_entry *entry, u64 ip)
+{
+	if (entry->nr < PERF_MAX_STACK_DEPTH)
+		entry->ip[entry->nr++] = ip;
+}
+
+extern int sysctl_perf_event_paranoid;
+extern int sysctl_perf_event_mlock;
+extern int sysctl_perf_event_sample_rate;
+
+extern int perf_proc_update_handler(struct ctl_table *table, int write,
+		void __user *buffer, size_t *lenp,
+		loff_t *ppos);
+
+static inline bool perf_paranoid_tracepoint_raw(void)
+{
+	return sysctl_perf_event_paranoid > -1;
+}
+
+static inline bool perf_paranoid_cpu(void)
+{
+	return sysctl_perf_event_paranoid > 0;
+}
+
+static inline bool perf_paranoid_kernel(void)
+{
+	return sysctl_perf_event_paranoid > 1;
+}
+
+extern void perf_event_init(void);
+extern void perf_tp_event(u64 addr, u64 count, void *record,
+			  int entry_size, struct pt_regs *regs,
+			  struct hlist_head *head, int rctx);
+extern void perf_bp_event(struct perf_event *event, void *data);
+
+#ifndef perf_misc_flags
+# define perf_misc_flags(regs) \
+		(user_mode(regs) ? PERF_RECORD_MISC_USER : PERF_RECORD_MISC_KERNEL)
+# define perf_instruction_pointer(regs)	instruction_pointer(regs)
+#endif
+
+static inline bool has_branch_stack(struct perf_event *event)
+{
+	return event->attr.sample_type & PERF_SAMPLE_BRANCH_STACK;
+}
+
+extern int perf_output_begin(struct perf_output_handle *handle,
+			     struct perf_event *event, unsigned int size);
+extern void perf_output_end(struct perf_output_handle *handle);
+extern void perf_output_copy(struct perf_output_handle *handle,
+			     const void *buf, unsigned int len);
+extern int perf_swevent_get_recursion_context(void);
+extern void perf_swevent_put_recursion_context(int rctx);
+extern void perf_event_enable(struct perf_event *event);
+extern void perf_event_disable(struct perf_event *event);
+extern void perf_event_task_tick(void);
+#else
+static inline void
+perf_event_task_sched_in(struct task_struct *prev,
+			 struct task_struct *task)			{ }
+static inline void
+perf_event_task_sched_out(struct task_struct *prev,
+			  struct task_struct *next)			{ }
+static inline int perf_event_init_task(struct task_struct *child)	{ return 0; }
+static inline void perf_event_exit_task(struct task_struct *child)	{ }
+static inline void perf_event_free_task(struct task_struct *task)	{ }
+static inline void perf_event_delayed_put(struct task_struct *task)	{ }
+static inline void perf_event_print_debug(void)				{ }
+static inline int perf_event_task_disable(void)				{ return -EINVAL; }
+static inline int perf_event_task_enable(void)				{ return -EINVAL; }
+static inline int perf_event_refresh(struct perf_event *event, int refresh)
+{
+	return -EINVAL;
+}
+
+static inline void
+perf_sw_event(u32 event_id, u64 nr, struct pt_regs *regs, u64 addr)	{ }
+static inline void
+perf_bp_event(struct perf_event *event, void *data)			{ }
+
+static inline int perf_register_guest_info_callbacks
+(struct perf_guest_info_callbacks *callbacks)				{ return 0; }
+static inline int perf_unregister_guest_info_callbacks
+(struct perf_guest_info_callbacks *callbacks)				{ return 0; }
+
+static inline void perf_event_mmap(struct vm_area_struct *vma)		{ }
+static inline void perf_event_comm(struct task_struct *tsk)		{ }
+static inline void perf_event_fork(struct task_struct *tsk)		{ }
+static inline void perf_event_init(void)				{ }
+static inline int  perf_swevent_get_recursion_context(void)		{ return -1; }
+static inline void perf_swevent_put_recursion_context(int rctx)		{ }
+static inline void perf_event_enable(struct perf_event *event)		{ }
+static inline void perf_event_disable(struct perf_event *event)		{ }
+static inline void perf_event_task_tick(void)				{ }
+#endif
+
+#define perf_output_put(handle, x) perf_output_copy((handle), &(x), sizeof(x))
+
+/*
+ * This has to have a higher priority than migration_notifier in sched.c.
+ */
+#define perf_cpu_notifier(fn)						\
+do {									\
+	static struct notifier_block fn##_nb __cpuinitdata =		\
+		{ .notifier_call = fn, .priority = CPU_PRI_PERF };	\
+	fn(&fn##_nb, (unsigned long)CPU_UP_PREPARE,			\
+		(void *)(unsigned long)smp_processor_id());		\
+	fn(&fn##_nb, (unsigned long)CPU_STARTING,			\
+		(void *)(unsigned long)smp_processor_id());		\
+	fn(&fn##_nb, (unsigned long)CPU_ONLINE,				\
+		(void *)(unsigned long)smp_processor_id());		\
+	register_cpu_notifier(&fn##_nb);				\
+} while (0)
+
+
+#define PMU_FORMAT_ATTR(_name, _format)					\
+static ssize_t								\
+_name##_show(struct device *dev,					\
+			       struct device_attribute *attr,		\
+			       char *page)				\
+{									\
+	BUILD_BUG_ON(sizeof(_format) >= PAGE_SIZE);			\
+	return sprintf(page, _format "\n");				\
+}									\
+									\
+static struct device_attribute format_attr_##_name = __ATTR_RO(_name)
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_PERF_EVENT_H */
diff --git a/include/linux/persistent_ram.h b/include/linux/persistent_ram.h
new file mode 100644
index 00000000..22422171
--- /dev/null
+++ b/include/linux/persistent_ram.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __LINUX_PERSISTENT_RAM_H__
+#define __LINUX_PERSISTENT_RAM_H__
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/types.h>
+
+struct persistent_ram_buffer;
+
+struct persistent_ram_descriptor {
+	const char	*name;
+	phys_addr_t	size;
+};
+
+struct persistent_ram {
+	phys_addr_t	start;
+	phys_addr_t	size;
+
+	int ecc_block_size;
+	int ecc_size;
+	int ecc_symsize;
+	int ecc_poly;
+
+	int					num_descs;
+	struct persistent_ram_descriptor	*descs;
+
+	struct list_head node;
+};
+
+struct persistent_ram_zone {
+	struct list_head node;
+	void *vaddr;
+	struct persistent_ram_buffer *buffer;
+	size_t buffer_size;
+
+	/* ECC correction */
+	bool ecc;
+	char *par_buffer;
+	char *par_header;
+	struct rs_control *rs_decoder;
+	int corrected_bytes;
+	int bad_blocks;
+	int ecc_block_size;
+	int ecc_size;
+	int ecc_symsize;
+	int ecc_poly;
+
+	char *old_log;
+	size_t old_log_size;
+	size_t old_log_footer_size;
+	bool early;
+};
+
+int persistent_ram_early_init(struct persistent_ram *ram);
+
+struct persistent_ram_zone *persistent_ram_init_ringbuffer(struct device *dev,
+		bool ecc);
+
+int persistent_ram_write(struct persistent_ram_zone *prz, const void *s,
+	unsigned int count);
+
+size_t persistent_ram_old_size(struct persistent_ram_zone *prz);
+void *persistent_ram_old(struct persistent_ram_zone *prz);
+void persistent_ram_free_old(struct persistent_ram_zone *prz);
+ssize_t persistent_ram_ecc_string(struct persistent_ram_zone *prz,
+	char *str, size_t len);
+
+#endif
diff --git a/include/linux/personality.h b/include/linux/personality.h
new file mode 100644
index 00000000..8fc7dd1a
--- /dev/null
+++ b/include/linux/personality.h
@@ -0,0 +1,121 @@
+#ifndef _LINUX_PERSONALITY_H
+#define _LINUX_PERSONALITY_H
+
+#ifdef __KERNEL__
+
+/*
+ * Handling of different ABIs (personalities).
+ */
+
+struct exec_domain;
+struct pt_regs;
+
+extern int		register_exec_domain(struct exec_domain *);
+extern int		unregister_exec_domain(struct exec_domain *);
+extern int		__set_personality(unsigned int);
+
+#endif /* __KERNEL__ */
+
+/*
+ * Flags for bug emulation.
+ *
+ * These occupy the top three bytes.
+ */
+enum {
+	UNAME26	=               0x0020000,
+	ADDR_NO_RANDOMIZE = 	0x0040000,	/* disable randomization of VA space */
+	FDPIC_FUNCPTRS =	0x0080000,	/* userspace function ptrs point to descriptors
+						 * (signal handling)
+						 */
+	MMAP_PAGE_ZERO =	0x0100000,
+	ADDR_COMPAT_LAYOUT =	0x0200000,
+	READ_IMPLIES_EXEC =	0x0400000,
+	ADDR_LIMIT_32BIT =	0x0800000,
+	SHORT_INODE =		0x1000000,
+	WHOLE_SECONDS =		0x2000000,
+	STICKY_TIMEOUTS	=	0x4000000,
+	ADDR_LIMIT_3GB = 	0x8000000,
+};
+
+/*
+ * Security-relevant compatibility flags that must be
+ * cleared upon setuid or setgid exec:
+ */
+#define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC  | \
+			    ADDR_NO_RANDOMIZE  | \
+			    ADDR_COMPAT_LAYOUT | \
+			    MMAP_PAGE_ZERO)
+
+/*
+ * Personality types.
+ *
+ * These go in the low byte.  Avoid using the top bit, it will
+ * conflict with error returns.
+ */
+enum {
+	PER_LINUX =		0x0000,
+	PER_LINUX_32BIT =	0x0000 | ADDR_LIMIT_32BIT,
+	PER_LINUX_FDPIC =	0x0000 | FDPIC_FUNCPTRS,
+	PER_SVR4 =		0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
+	PER_SVR3 =		0x0002 | STICKY_TIMEOUTS | SHORT_INODE,
+	PER_SCOSVR3 =		0x0003 | STICKY_TIMEOUTS |
+					 WHOLE_SECONDS | SHORT_INODE,
+	PER_OSR5 =		0x0003 | STICKY_TIMEOUTS | WHOLE_SECONDS,
+	PER_WYSEV386 =		0x0004 | STICKY_TIMEOUTS | SHORT_INODE,
+	PER_ISCR4 =		0x0005 | STICKY_TIMEOUTS,
+	PER_BSD =		0x0006,
+	PER_SUNOS =		0x0006 | STICKY_TIMEOUTS,
+	PER_XENIX =		0x0007 | STICKY_TIMEOUTS | SHORT_INODE,
+	PER_LINUX32 =		0x0008,
+	PER_LINUX32_3GB =	0x0008 | ADDR_LIMIT_3GB,
+	PER_IRIX32 =		0x0009 | STICKY_TIMEOUTS,/* IRIX5 32-bit */
+	PER_IRIXN32 =		0x000a | STICKY_TIMEOUTS,/* IRIX6 new 32-bit */
+	PER_IRIX64 =		0x000b | STICKY_TIMEOUTS,/* IRIX6 64-bit */
+	PER_RISCOS =		0x000c,
+	PER_SOLARIS =		0x000d | STICKY_TIMEOUTS,
+	PER_UW7 =		0x000e | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
+	PER_OSF4 =		0x000f,			 /* OSF/1 v4 */
+	PER_HPUX =		0x0010,
+	PER_MASK =		0x00ff,
+};
+
+#ifdef __KERNEL__
+
+/*
+ * Description of an execution domain.
+ * 
+ * The first two members are refernced from assembly source
+ * and should stay where they are unless explicitly needed.
+ */
+typedef void (*handler_t)(int, struct pt_regs *);
+
+struct exec_domain {
+	const char		*name;		/* name of the execdomain */
+	handler_t		handler;	/* handler for syscalls */
+	unsigned char		pers_low;	/* lowest personality */
+	unsigned char		pers_high;	/* highest personality */
+	unsigned long		*signal_map;	/* signal mapping */
+	unsigned long		*signal_invmap;	/* reverse signal mapping */
+	struct map_segment	*err_map;	/* error mapping */
+	struct map_segment	*socktype_map;	/* socket type mapping */
+	struct map_segment	*sockopt_map;	/* socket option mapping */
+	struct map_segment	*af_map;	/* address family mapping */
+	struct module		*module;	/* module context of the ed. */
+	struct exec_domain	*next;		/* linked list (internal) */
+};
+
+/*
+ * Return the base personality without flags.
+ */
+#define personality(pers)	(pers & PER_MASK)
+
+
+/*
+ * Change personality of the currently running process.
+ */
+#define set_personality(pers) \
+	((current->personality == (pers)) ? 0 : __set_personality(pers))
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_PERSONALITY_H */
diff --git a/include/linux/pfkeyv2.h b/include/linux/pfkeyv2.h
new file mode 100644
index 00000000..0b80c806
--- /dev/null
+++ b/include/linux/pfkeyv2.h
@@ -0,0 +1,370 @@
+/* PF_KEY user interface, this is defined by rfc2367 so
+ * do not make arbitrary modifications or else this header
+ * file will not be compliant.
+ */
+
+#ifndef _LINUX_PFKEY2_H
+#define _LINUX_PFKEY2_H
+
+#include <linux/types.h>
+
+#define PF_KEY_V2		2
+#define PFKEYV2_REVISION	199806L
+
+struct sadb_msg {
+	__u8		sadb_msg_version;
+	__u8		sadb_msg_type;
+	__u8		sadb_msg_errno;
+	__u8		sadb_msg_satype;
+	__u16	sadb_msg_len;
+	__u16	sadb_msg_reserved;
+	__u32	sadb_msg_seq;
+	__u32	sadb_msg_pid;
+} __attribute__((packed));
+/* sizeof(struct sadb_msg) == 16 */
+
+struct sadb_ext {
+	__u16	sadb_ext_len;
+	__u16	sadb_ext_type;
+} __attribute__((packed));
+/* sizeof(struct sadb_ext) == 4 */
+
+struct sadb_sa {
+	__u16	sadb_sa_len;
+	__u16	sadb_sa_exttype;
+	__be32		sadb_sa_spi;
+	__u8		sadb_sa_replay;
+	__u8		sadb_sa_state;
+	__u8		sadb_sa_auth;
+	__u8		sadb_sa_encrypt;
+	__u32	sadb_sa_flags;
+} __attribute__((packed));
+/* sizeof(struct sadb_sa) == 16 */
+
+struct sadb_lifetime {
+	__u16	sadb_lifetime_len;
+	__u16	sadb_lifetime_exttype;
+	__u32	sadb_lifetime_allocations;
+	__u64	sadb_lifetime_bytes;
+	__u64	sadb_lifetime_addtime;
+	__u64	sadb_lifetime_usetime;
+} __attribute__((packed));
+/* sizeof(struct sadb_lifetime) == 32 */
+
+struct sadb_address {
+	__u16	sadb_address_len;
+	__u16	sadb_address_exttype;
+	__u8		sadb_address_proto;
+	__u8		sadb_address_prefixlen;
+	__u16	sadb_address_reserved;
+} __attribute__((packed));
+/* sizeof(struct sadb_address) == 8 */
+
+struct sadb_key {
+	__u16	sadb_key_len;
+	__u16	sadb_key_exttype;
+	__u16	sadb_key_bits;
+	__u16	sadb_key_reserved;
+} __attribute__((packed));
+/* sizeof(struct sadb_key) == 8 */
+
+struct sadb_ident {
+	__u16	sadb_ident_len;
+	__u16	sadb_ident_exttype;
+	__u16	sadb_ident_type;
+	__u16	sadb_ident_reserved;
+	__u64	sadb_ident_id;
+} __attribute__((packed));
+/* sizeof(struct sadb_ident) == 16 */
+
+struct sadb_sens {
+	__u16	sadb_sens_len;
+	__u16	sadb_sens_exttype;
+	__u32	sadb_sens_dpd;
+	__u8		sadb_sens_sens_level;
+	__u8		sadb_sens_sens_len;
+	__u8		sadb_sens_integ_level;
+	__u8		sadb_sens_integ_len;
+	__u32	sadb_sens_reserved;
+} __attribute__((packed));
+/* sizeof(struct sadb_sens) == 16 */
+
+/* followed by:
+	__u64	sadb_sens_bitmap[sens_len];
+	__u64	sadb_integ_bitmap[integ_len];  */
+
+struct sadb_prop {
+	__u16	sadb_prop_len;
+	__u16	sadb_prop_exttype;
+	__u8		sadb_prop_replay;
+	__u8		sadb_prop_reserved[3];
+} __attribute__((packed));
+/* sizeof(struct sadb_prop) == 8 */
+
+/* followed by:
+	struct sadb_comb sadb_combs[(sadb_prop_len +
+		sizeof(__u64) - sizeof(struct sadb_prop)) /
+		sizeof(struct sadb_comb)]; */
+
+struct sadb_comb {
+	__u8		sadb_comb_auth;
+	__u8		sadb_comb_encrypt;
+	__u16	sadb_comb_flags;
+	__u16	sadb_comb_auth_minbits;
+	__u16	sadb_comb_auth_maxbits;
+	__u16	sadb_comb_encrypt_minbits;
+	__u16	sadb_comb_encrypt_maxbits;
+	__u32	sadb_comb_reserved;
+	__u32	sadb_comb_soft_allocations;
+	__u32	sadb_comb_hard_allocations;
+	__u64	sadb_comb_soft_bytes;
+	__u64	sadb_comb_hard_bytes;
+	__u64	sadb_comb_soft_addtime;
+	__u64	sadb_comb_hard_addtime;
+	__u64	sadb_comb_soft_usetime;
+	__u64	sadb_comb_hard_usetime;
+} __attribute__((packed));
+/* sizeof(struct sadb_comb) == 72 */
+
+struct sadb_supported {
+	__u16	sadb_supported_len;
+	__u16	sadb_supported_exttype;
+	__u32	sadb_supported_reserved;
+} __attribute__((packed));
+/* sizeof(struct sadb_supported) == 8 */
+
+/* followed by:
+	struct sadb_alg sadb_algs[(sadb_supported_len +
+		sizeof(__u64) - sizeof(struct sadb_supported)) /
+		sizeof(struct sadb_alg)]; */
+
+struct sadb_alg {
+	__u8		sadb_alg_id;
+	__u8		sadb_alg_ivlen;
+	__u16	sadb_alg_minbits;
+	__u16	sadb_alg_maxbits;
+	__u16	sadb_alg_reserved;
+} __attribute__((packed));
+/* sizeof(struct sadb_alg) == 8 */
+
+struct sadb_spirange {
+	__u16	sadb_spirange_len;
+	__u16	sadb_spirange_exttype;
+	__u32	sadb_spirange_min;
+	__u32	sadb_spirange_max;
+	__u32	sadb_spirange_reserved;
+} __attribute__((packed));
+/* sizeof(struct sadb_spirange) == 16 */
+
+struct sadb_x_kmprivate {
+	__u16	sadb_x_kmprivate_len;
+	__u16	sadb_x_kmprivate_exttype;
+	__u32	sadb_x_kmprivate_reserved;
+} __attribute__((packed));
+/* sizeof(struct sadb_x_kmprivate) == 8 */
+
+struct sadb_x_sa2 {
+	__u16	sadb_x_sa2_len;
+	__u16	sadb_x_sa2_exttype;
+	__u8		sadb_x_sa2_mode;
+	__u8		sadb_x_sa2_reserved1;
+	__u16	sadb_x_sa2_reserved2;
+	__u32	sadb_x_sa2_sequence;
+	__u32	sadb_x_sa2_reqid;
+} __attribute__((packed));
+/* sizeof(struct sadb_x_sa2) == 16 */
+
+struct sadb_x_policy {
+	__u16	sadb_x_policy_len;
+	__u16	sadb_x_policy_exttype;
+	__u16	sadb_x_policy_type;
+	__u8		sadb_x_policy_dir;
+	__u8		sadb_x_policy_reserved;
+	__u32	sadb_x_policy_id;
+	__u32	sadb_x_policy_priority;
+} __attribute__((packed));
+/* sizeof(struct sadb_x_policy) == 16 */
+
+struct sadb_x_ipsecrequest {
+	__u16	sadb_x_ipsecrequest_len;
+	__u16	sadb_x_ipsecrequest_proto;
+	__u8		sadb_x_ipsecrequest_mode;
+	__u8		sadb_x_ipsecrequest_level;
+	__u16	sadb_x_ipsecrequest_reserved1;
+	__u32	sadb_x_ipsecrequest_reqid;
+	__u32	sadb_x_ipsecrequest_reserved2;
+} __attribute__((packed));
+/* sizeof(struct sadb_x_ipsecrequest) == 16 */
+
+/* This defines the TYPE of Nat Traversal in use.  Currently only one
+ * type of NAT-T is supported, draft-ietf-ipsec-udp-encaps-06
+ */
+struct sadb_x_nat_t_type {
+	__u16	sadb_x_nat_t_type_len;
+	__u16	sadb_x_nat_t_type_exttype;
+	__u8		sadb_x_nat_t_type_type;
+	__u8		sadb_x_nat_t_type_reserved[3];
+} __attribute__((packed));
+/* sizeof(struct sadb_x_nat_t_type) == 8 */
+
+/* Pass a NAT Traversal port (Source or Dest port) */
+struct sadb_x_nat_t_port {
+	__u16	sadb_x_nat_t_port_len;
+	__u16	sadb_x_nat_t_port_exttype;
+	__be16		sadb_x_nat_t_port_port;
+	__u16	sadb_x_nat_t_port_reserved;
+} __attribute__((packed));
+/* sizeof(struct sadb_x_nat_t_port) == 8 */
+
+/* Generic LSM security context */
+struct sadb_x_sec_ctx {
+	__u16	sadb_x_sec_len;
+	__u16	sadb_x_sec_exttype;
+	__u8		sadb_x_ctx_alg;  /* LSMs: e.g., selinux == 1 */
+	__u8		sadb_x_ctx_doi;
+	__u16	sadb_x_ctx_len;
+} __attribute__((packed));
+/* sizeof(struct sadb_sec_ctx) = 8 */
+
+/* Used by MIGRATE to pass addresses IKE will use to perform
+ * negotiation with the peer */
+struct sadb_x_kmaddress {
+	__u16	sadb_x_kmaddress_len;
+	__u16	sadb_x_kmaddress_exttype;
+	__u32	sadb_x_kmaddress_reserved;
+} __attribute__((packed));
+/* sizeof(struct sadb_x_kmaddress) == 8 */
+
+/* Message types */
+#define SADB_RESERVED		0
+#define SADB_GETSPI		1
+#define SADB_UPDATE		2
+#define SADB_ADD		3
+#define SADB_DELETE		4
+#define SADB_GET		5
+#define SADB_ACQUIRE		6
+#define SADB_REGISTER		7
+#define SADB_EXPIRE		8
+#define SADB_FLUSH		9
+#define SADB_DUMP		10
+#define SADB_X_PROMISC		11
+#define SADB_X_PCHANGE		12
+#define SADB_X_SPDUPDATE	13
+#define SADB_X_SPDADD		14
+#define SADB_X_SPDDELETE	15
+#define SADB_X_SPDGET		16
+#define SADB_X_SPDACQUIRE	17
+#define SADB_X_SPDDUMP		18
+#define SADB_X_SPDFLUSH		19
+#define SADB_X_SPDSETIDX	20
+#define SADB_X_SPDEXPIRE	21
+#define SADB_X_SPDDELETE2	22
+#define SADB_X_NAT_T_NEW_MAPPING	23
+#define SADB_X_MIGRATE		24
+#define SADB_MAX		24
+
+/* Security Association flags */
+#define SADB_SAFLAGS_PFS	1
+#define SADB_SAFLAGS_NOPMTUDISC	0x20000000
+#define SADB_SAFLAGS_DECAP_DSCP	0x40000000
+#define SADB_SAFLAGS_NOECN	0x80000000
+
+/* Security Association states */
+#define SADB_SASTATE_LARVAL	0
+#define SADB_SASTATE_MATURE	1
+#define SADB_SASTATE_DYING	2
+#define SADB_SASTATE_DEAD	3
+#define SADB_SASTATE_MAX	3
+
+/* Security Association types */
+#define SADB_SATYPE_UNSPEC	0
+#define SADB_SATYPE_AH		2
+#define SADB_SATYPE_ESP		3
+#define SADB_SATYPE_RSVP	5
+#define SADB_SATYPE_OSPFV2	6
+#define SADB_SATYPE_RIPV2	7
+#define SADB_SATYPE_MIP		8
+#define SADB_X_SATYPE_IPCOMP	9
+#define SADB_SATYPE_MAX		9
+
+/* Authentication algorithms */
+#define SADB_AALG_NONE			0
+#define SADB_AALG_MD5HMAC		2
+#define SADB_AALG_SHA1HMAC		3
+#define SADB_X_AALG_SHA2_256HMAC	5
+#define SADB_X_AALG_SHA2_384HMAC	6
+#define SADB_X_AALG_SHA2_512HMAC	7
+#define SADB_X_AALG_RIPEMD160HMAC	8
+#define SADB_X_AALG_AES_XCBC_MAC	9
+#define SADB_X_AALG_NULL		251	/* kame */
+#define SADB_AALG_MAX			251
+
+/* Encryption algorithms */
+#define SADB_EALG_NONE			0
+#define SADB_EALG_DESCBC		2
+#define SADB_EALG_3DESCBC		3
+#define SADB_X_EALG_CASTCBC		6
+#define SADB_X_EALG_BLOWFISHCBC		7
+#define SADB_EALG_NULL			11
+#define SADB_X_EALG_AESCBC		12
+#define SADB_X_EALG_AESCTR		13
+#define SADB_X_EALG_AES_CCM_ICV8	14
+#define SADB_X_EALG_AES_CCM_ICV12	15
+#define SADB_X_EALG_AES_CCM_ICV16	16
+#define SADB_X_EALG_AES_GCM_ICV8	18
+#define SADB_X_EALG_AES_GCM_ICV12	19
+#define SADB_X_EALG_AES_GCM_ICV16	20
+#define SADB_X_EALG_CAMELLIACBC		22
+#define SADB_X_EALG_NULL_AES_GMAC	23
+#define SADB_EALG_MAX                   253 /* last EALG */
+/* private allocations should use 249-255 (RFC2407) */
+#define SADB_X_EALG_SERPENTCBC  252     /* draft-ietf-ipsec-ciph-aes-cbc-00 */
+#define SADB_X_EALG_TWOFISHCBC  253     /* draft-ietf-ipsec-ciph-aes-cbc-00 */
+
+/* Compression algorithms */
+#define SADB_X_CALG_NONE		0
+#define SADB_X_CALG_OUI			1
+#define SADB_X_CALG_DEFLATE		2
+#define SADB_X_CALG_LZS			3
+#define SADB_X_CALG_LZJH		4
+#define SADB_X_CALG_MAX			4
+
+/* Extension Header values */
+#define SADB_EXT_RESERVED		0
+#define SADB_EXT_SA			1
+#define SADB_EXT_LIFETIME_CURRENT	2
+#define SADB_EXT_LIFETIME_HARD		3
+#define SADB_EXT_LIFETIME_SOFT		4
+#define SADB_EXT_ADDRESS_SRC		5
+#define SADB_EXT_ADDRESS_DST		6
+#define SADB_EXT_ADDRESS_PROXY		7
+#define SADB_EXT_KEY_AUTH		8
+#define SADB_EXT_KEY_ENCRYPT		9
+#define SADB_EXT_IDENTITY_SRC		10
+#define SADB_EXT_IDENTITY_DST		11
+#define SADB_EXT_SENSITIVITY		12
+#define SADB_EXT_PROPOSAL		13
+#define SADB_EXT_SUPPORTED_AUTH		14
+#define SADB_EXT_SUPPORTED_ENCRYPT	15
+#define SADB_EXT_SPIRANGE		16
+#define SADB_X_EXT_KMPRIVATE		17
+#define SADB_X_EXT_POLICY		18
+#define SADB_X_EXT_SA2			19
+/* The next four entries are for setting up NAT Traversal */
+#define SADB_X_EXT_NAT_T_TYPE		20
+#define SADB_X_EXT_NAT_T_SPORT		21
+#define SADB_X_EXT_NAT_T_DPORT		22
+#define SADB_X_EXT_NAT_T_OA		23
+#define SADB_X_EXT_SEC_CTX		24
+/* Used with MIGRATE to pass @ to IKE for negotiation */
+#define SADB_X_EXT_KMADDRESS		25
+#define SADB_EXT_MAX			25
+
+/* Identity Extension values */
+#define SADB_IDENTTYPE_RESERVED	0
+#define SADB_IDENTTYPE_PREFIX	1
+#define SADB_IDENTTYPE_FQDN	2
+#define SADB_IDENTTYPE_USERFQDN	3
+#define SADB_IDENTTYPE_MAX	3
+
+#endif /* !(_LINUX_PFKEY2_H) */
diff --git a/include/linux/pfn.h b/include/linux/pfn.h
new file mode 100644
index 00000000..76466372
--- /dev/null
+++ b/include/linux/pfn.h
@@ -0,0 +1,13 @@
+#ifndef _LINUX_PFN_H_
+#define _LINUX_PFN_H_
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#endif
+
+#define PFN_ALIGN(x)	(((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK)
+#define PFN_UP(x)	(((x) + PAGE_SIZE-1) >> PAGE_SHIFT)
+#define PFN_DOWN(x)	((x) >> PAGE_SHIFT)
+#define PFN_PHYS(x)	((phys_addr_t)(x) << PAGE_SHIFT)
+
+#endif
diff --git a/include/linux/pg.h b/include/linux/pg.h
new file mode 100644
index 00000000..db994bb0
--- /dev/null
+++ b/include/linux/pg.h
@@ -0,0 +1,63 @@
+/* 	pg.h (c) 1998  Grant R. Guenther <grant@torque.net>
+ 		       Under the terms of the GNU General Public License
+
+
+	pg.h defines the user interface to the generic ATAPI packet
+        command driver for parallel port ATAPI devices (pg). The
+	driver is loosely modelled after the generic SCSI driver, sg,
+	although the actual interface is different.
+
+	The pg driver provides a simple character device interface for
+        sending ATAPI commands to a device.  With the exception of the
+	ATAPI reset operation, all operations are performed by a pair
+        of read and write operations to the appropriate /dev/pgN device.
+	A write operation delivers a command and any outbound data in
+        a single buffer.  Normally, the write will succeed unless the
+        device is offline or malfunctioning, or there is already another
+	command pending.  If the write succeeds, it should be followed
+        immediately by a read operation, to obtain any returned data and
+        status information.  A read will fail if there is no operation
+        in progress.
+
+	As a special case, the device can be reset with a write operation,
+        and in this case, no following read is expected, or permitted.
+
+	There are no ioctl() operations.  Any single operation
+	may transfer at most PG_MAX_DATA bytes.  Note that the driver must
+        copy the data through an internal buffer.  In keeping with all
+	current ATAPI devices, command packets are assumed to be exactly
+	12 bytes in length.
+
+	To permit future changes to this interface, the headers in the
+	read and write buffers contain a single character "magic" flag.
+        Currently this flag must be the character "P".
+
+*/
+
+#define PG_MAGIC	'P'
+#define PG_RESET	'Z'
+#define PG_COMMAND	'C'
+
+#define PG_MAX_DATA	32768
+
+struct pg_write_hdr {
+
+	char	magic;		/* == PG_MAGIC */
+	char	func;		/* PG_RESET or PG_COMMAND */
+	int     dlen;		/* number of bytes expected to transfer */
+	int     timeout;	/* number of seconds before timeout */
+	char	packet[12];	/* packet command */
+
+};
+
+struct pg_read_hdr {
+
+	char	magic;		/* == PG_MAGIC */
+	char	scsi;		/* "scsi" status == sense key */
+	int	dlen;		/* size of device transfer request */
+	int     duration;	/* time in seconds command took */
+	char    pad[12];	/* not used */
+
+};
+
+/* end of pg.h */
diff --git a/include/linux/phantom.h b/include/linux/phantom.h
new file mode 100644
index 00000000..94dd6645
--- /dev/null
+++ b/include/linux/phantom.h
@@ -0,0 +1,49 @@
+/*
+ *  Copyright (C) 2005-2007 Jiri Slaby <jirislaby@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ */
+
+#ifndef __PHANTOM_H
+#define __PHANTOM_H
+
+#include <linux/types.h>
+
+/* PHN_(G/S)ET_REG param */
+struct phm_reg {
+	__u32 reg;
+	__u32 value;
+};
+
+/* PHN_(G/S)ET_REGS param */
+struct phm_regs {
+	__u32 count;
+	__u32 mask;
+	__u32 values[8];
+};
+
+#define PH_IOC_MAGIC		'p'
+#define PHN_GET_REG		_IOWR(PH_IOC_MAGIC, 0, struct phm_reg *)
+#define PHN_SET_REG		_IOW(PH_IOC_MAGIC, 1, struct phm_reg *)
+#define PHN_GET_REGS		_IOWR(PH_IOC_MAGIC, 2, struct phm_regs *)
+#define PHN_SET_REGS		_IOW(PH_IOC_MAGIC, 3, struct phm_regs *)
+/* this ioctl tells the driver, that the caller is not OpenHaptics and might
+ * use improved registers update (no more phantom switchoffs when using
+ * libphantom) */
+#define PHN_NOT_OH		_IO(PH_IOC_MAGIC, 4)
+#define PHN_GETREG		_IOWR(PH_IOC_MAGIC, 5, struct phm_reg)
+#define PHN_SETREG		_IOW(PH_IOC_MAGIC, 6, struct phm_reg)
+#define PHN_GETREGS		_IOWR(PH_IOC_MAGIC, 7, struct phm_regs)
+#define PHN_SETREGS		_IOW(PH_IOC_MAGIC, 8, struct phm_regs)
+
+#define PHN_CONTROL		0x6     /* control byte in iaddr space */
+#define PHN_CTL_AMP		0x1     /*   switch after torques change */
+#define PHN_CTL_BUT		0x2     /*   is button switched */
+#define PHN_CTL_IRQ		0x10    /*   is irq enabled */
+
+#define PHN_ZERO_FORCE		2048	/* zero torque on motor */
+
+#endif
diff --git a/include/linux/phonedev.h b/include/linux/phonedev.h
new file mode 100644
index 00000000..4269de99
--- /dev/null
+++ b/include/linux/phonedev.h
@@ -0,0 +1,25 @@
+#ifndef __LINUX_PHONEDEV_H
+#define __LINUX_PHONEDEV_H
+
+#include <linux/types.h>
+
+#ifdef __KERNEL__
+
+#include <linux/poll.h>
+
+struct phone_device {
+	struct phone_device *next;
+	const struct file_operations *f_op;
+	int (*open) (struct phone_device *, struct file *);
+	int board;		/* Device private index */
+	int minor;
+};
+
+extern int phonedev_init(void);
+#define PHONE_MAJOR	100
+extern int phone_register_device(struct phone_device *, int unit);
+#define PHONE_UNIT_ANY	-1
+extern void phone_unregister_device(struct phone_device *);
+
+#endif
+#endif
diff --git a/include/linux/phonet.h b/include/linux/phonet.h
new file mode 100644
index 00000000..f48bfc80
--- /dev/null
+++ b/include/linux/phonet.h
@@ -0,0 +1,200 @@
+/**
+ * file phonet.h
+ *
+ * Phonet sockets kernel interface
+ *
+ * Copyright (C) 2008 Nokia Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef LINUX_PHONET_H
+#define LINUX_PHONET_H
+
+#include <linux/types.h>
+#include <linux/socket.h>
+
+/* Automatic protocol selection */
+#define PN_PROTO_TRANSPORT	0
+/* Phonet datagram socket */
+#define PN_PROTO_PHONET		1
+/* Phonet pipe */
+#define PN_PROTO_PIPE		2
+#define PHONET_NPROTO		3
+
+/* Socket options for SOL_PNPIPE level */
+#define PNPIPE_ENCAP		1
+#define PNPIPE_IFINDEX		2
+#define PNPIPE_HANDLE		3
+#define PNPIPE_INITSTATE	4
+
+#define PNADDR_ANY		0
+#define PNADDR_BROADCAST	0xFC
+#define PNPORT_RESOURCE_ROUTING	0
+
+/* Values for PNPIPE_ENCAP option */
+#define PNPIPE_ENCAP_NONE	0
+#define PNPIPE_ENCAP_IP		1
+
+/* ioctls */
+#define SIOCPNGETOBJECT		(SIOCPROTOPRIVATE + 0)
+#define SIOCPNENABLEPIPE	(SIOCPROTOPRIVATE + 13)
+#define SIOCPNADDRESOURCE	(SIOCPROTOPRIVATE + 14)
+#define SIOCPNDELRESOURCE	(SIOCPROTOPRIVATE + 15)
+
+/* Phonet protocol header */
+struct phonethdr {
+	__u8	pn_rdev;
+	__u8	pn_sdev;
+	__u8	pn_res;
+	__be16	pn_length;
+	__u8	pn_robj;
+	__u8	pn_sobj;
+} __attribute__((packed));
+
+/* Common Phonet payload header */
+struct phonetmsg {
+	__u8	pn_trans_id;	/* transaction ID */
+	__u8	pn_msg_id;	/* message type */
+	union {
+		struct {
+			__u8	pn_submsg_id;	/* message subtype */
+			__u8	pn_data[5];
+		} base;
+		struct {
+			__u16	pn_e_res_id;	/* extended resource ID */
+			__u8	pn_e_submsg_id;	/* message subtype */
+			__u8	pn_e_data[3];
+		} ext;
+	} pn_msg_u;
+};
+#define PN_COMMON_MESSAGE	0xF0
+#define PN_COMMGR		0x10
+#define PN_PREFIX		0xE0 /* resource for extended messages */
+#define pn_submsg_id		pn_msg_u.base.pn_submsg_id
+#define pn_e_submsg_id		pn_msg_u.ext.pn_e_submsg_id
+#define pn_e_res_id		pn_msg_u.ext.pn_e_res_id
+#define pn_data			pn_msg_u.base.pn_data
+#define pn_e_data		pn_msg_u.ext.pn_e_data
+
+/* data for unreachable errors */
+#define PN_COMM_SERVICE_NOT_IDENTIFIED_RESP	0x01
+#define PN_COMM_ISA_ENTITY_NOT_REACHABLE_RESP	0x14
+#define pn_orig_msg_id		pn_data[0]
+#define pn_status		pn_data[1]
+#define pn_e_orig_msg_id	pn_e_data[0]
+#define pn_e_status		pn_e_data[1]
+
+/* Phonet socket address structure */
+struct sockaddr_pn {
+	__kernel_sa_family_t spn_family;
+	__u8 spn_obj;
+	__u8 spn_dev;
+	__u8 spn_resource;
+	__u8 spn_zero[sizeof(struct sockaddr) - sizeof(__kernel_sa_family_t) - 3];
+} __attribute__((packed));
+
+/* Well known address */
+#define PN_DEV_PC	0x10
+
+static inline __u16 pn_object(__u8 addr, __u16 port)
+{
+	return (addr << 8) | (port & 0x3ff);
+}
+
+static inline __u8 pn_obj(__u16 handle)
+{
+	return handle & 0xff;
+}
+
+static inline __u8 pn_dev(__u16 handle)
+{
+	return handle >> 8;
+}
+
+static inline __u16 pn_port(__u16 handle)
+{
+	return handle & 0x3ff;
+}
+
+static inline __u8 pn_addr(__u16 handle)
+{
+	return (handle >> 8) & 0xfc;
+}
+
+static inline void pn_sockaddr_set_addr(struct sockaddr_pn *spn, __u8 addr)
+{
+	spn->spn_dev &= 0x03;
+	spn->spn_dev |= addr & 0xfc;
+}
+
+static inline void pn_sockaddr_set_port(struct sockaddr_pn *spn, __u16 port)
+{
+	spn->spn_dev &= 0xfc;
+	spn->spn_dev |= (port >> 8) & 0x03;
+	spn->spn_obj = port & 0xff;
+}
+
+static inline void pn_sockaddr_set_object(struct sockaddr_pn *spn,
+						__u16 handle)
+{
+	spn->spn_dev = pn_dev(handle);
+	spn->spn_obj = pn_obj(handle);
+}
+
+static inline void pn_sockaddr_set_resource(struct sockaddr_pn *spn,
+						__u8 resource)
+{
+	spn->spn_resource = resource;
+}
+
+static inline __u8 pn_sockaddr_get_addr(const struct sockaddr_pn *spn)
+{
+	return spn->spn_dev & 0xfc;
+}
+
+static inline __u16 pn_sockaddr_get_port(const struct sockaddr_pn *spn)
+{
+	return ((spn->spn_dev & 0x03) << 8) | spn->spn_obj;
+}
+
+static inline __u16 pn_sockaddr_get_object(const struct sockaddr_pn *spn)
+{
+	return pn_object(spn->spn_dev, spn->spn_obj);
+}
+
+static inline __u8 pn_sockaddr_get_resource(const struct sockaddr_pn *spn)
+{
+	return spn->spn_resource;
+}
+
+/* Phonet device ioctl requests */
+#ifdef __KERNEL__
+#define SIOCPNGAUTOCONF		(SIOCDEVPRIVATE + 0)
+
+struct if_phonet_autoconf {
+	uint8_t device;
+};
+
+struct if_phonet_req {
+	char ifr_phonet_name[16];
+	union {
+		struct if_phonet_autoconf ifru_phonet_autoconf;
+	} ifr_ifru;
+};
+#define ifr_phonet_autoconf ifr_ifru.ifru_phonet_autoconf
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/linux/phy.h b/include/linux/phy.h
new file mode 100644
index 00000000..6fe0a37d
--- /dev/null
+++ b/include/linux/phy.h
@@ -0,0 +1,537 @@
+/*
+ * include/linux/phy.h
+ *
+ * Framework and drivers for configuring and reading different PHYs
+ * Based on code in sungem_phy.c and gianfar_phy.c
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __PHY_H
+#define __PHY_H
+
+#include <linux/spinlock.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <linux/mod_devicetable.h>
+
+#include <linux/atomic.h>
+
+#define PHY_BASIC_FEATURES	(SUPPORTED_10baseT_Half | \
+				 SUPPORTED_10baseT_Full | \
+				 SUPPORTED_100baseT_Half | \
+				 SUPPORTED_100baseT_Full | \
+				 SUPPORTED_Autoneg | \
+				 SUPPORTED_TP | \
+				 SUPPORTED_MII)
+
+#define PHY_GBIT_FEATURES	(PHY_BASIC_FEATURES | \
+				 SUPPORTED_1000baseT_Half | \
+				 SUPPORTED_1000baseT_Full)
+
+/*
+ * Set phydev->irq to PHY_POLL if interrupts are not supported,
+ * or not desired for this PHY.  Set to PHY_IGNORE_INTERRUPT if
+ * the attached driver handles the interrupt
+ */
+#define PHY_POLL		-1
+#define PHY_IGNORE_INTERRUPT	-2
+
+#define PHY_HAS_INTERRUPT	0x00000001
+#define PHY_HAS_MAGICANEG	0x00000002
+
+/* Interface Mode definitions */
+typedef enum {
+	PHY_INTERFACE_MODE_NA,
+	PHY_INTERFACE_MODE_MII,
+	PHY_INTERFACE_MODE_GMII,
+	PHY_INTERFACE_MODE_SGMII,
+	PHY_INTERFACE_MODE_TBI,
+	PHY_INTERFACE_MODE_RMII,
+	PHY_INTERFACE_MODE_RGMII,
+	PHY_INTERFACE_MODE_RGMII_ID,
+	PHY_INTERFACE_MODE_RGMII_RXID,
+	PHY_INTERFACE_MODE_RGMII_TXID,
+	PHY_INTERFACE_MODE_RTBI,
+	PHY_INTERFACE_MODE_SMII,
+} phy_interface_t;
+
+
+#define PHY_INIT_TIMEOUT	100000
+#define PHY_STATE_TIME		1
+#define PHY_FORCE_TIMEOUT	10
+#define PHY_AN_TIMEOUT		10
+
+#define PHY_MAX_ADDR	32
+
+/* Used when trying to connect to a specific phy (mii bus id:phy device id) */
+#define PHY_ID_FMT "%s:%02x"
+
+/*
+ * Need to be a little smaller than phydev->dev.bus_id to leave room
+ * for the ":%02x"
+ */
+#define MII_BUS_ID_SIZE	(20 - 3)
+
+/* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit
+   IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */
+#define MII_ADDR_C45 (1<<30)
+
+struct device;
+struct sk_buff;
+
+/*
+ * The Bus class for PHYs.  Devices which provide access to
+ * PHYs should register using this structure
+ */
+struct mii_bus {
+	const char *name;
+	char id[MII_BUS_ID_SIZE];
+	void *priv;
+	int (*read)(struct mii_bus *bus, int phy_id, int regnum);
+	int (*write)(struct mii_bus *bus, int phy_id, int regnum, u16 val);
+	int (*reset)(struct mii_bus *bus);
+
+	/*
+	 * A lock to ensure that only one thing can read/write
+	 * the MDIO bus at a time
+	 */
+	struct mutex mdio_lock;
+
+	struct device *parent;
+	enum {
+		MDIOBUS_ALLOCATED = 1,
+		MDIOBUS_REGISTERED,
+		MDIOBUS_UNREGISTERED,
+		MDIOBUS_RELEASED,
+	} state;
+	struct device dev;
+
+	/* list of all PHYs on bus */
+	struct phy_device *phy_map[PHY_MAX_ADDR];
+
+	/* PHY addresses to be ignored when probing */
+	u32 phy_mask;
+
+	/*
+	 * Pointer to an array of interrupts, each PHY's
+	 * interrupt at the index matching its address
+	 */
+	int *irq;
+};
+#define to_mii_bus(d) container_of(d, struct mii_bus, dev)
+
+struct mii_bus *mdiobus_alloc_size(size_t);
+static inline struct mii_bus *mdiobus_alloc(void)
+{
+	return mdiobus_alloc_size(0);
+}
+
+int mdiobus_register(struct mii_bus *bus);
+void mdiobus_unregister(struct mii_bus *bus);
+void mdiobus_free(struct mii_bus *bus);
+struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr);
+int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum);
+int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val);
+
+
+#define PHY_INTERRUPT_DISABLED	0x0
+#define PHY_INTERRUPT_ENABLED	0x80000000
+
+/* PHY state machine states:
+ *
+ * DOWN: PHY device and driver are not ready for anything.  probe
+ * should be called if and only if the PHY is in this state,
+ * given that the PHY device exists.
+ * - PHY driver probe function will, depending on the PHY, set
+ * the state to STARTING or READY
+ *
+ * STARTING:  PHY device is coming up, and the ethernet driver is
+ * not ready.  PHY drivers may set this in the probe function.
+ * If they do, they are responsible for making sure the state is
+ * eventually set to indicate whether the PHY is UP or READY,
+ * depending on the state when the PHY is done starting up.
+ * - PHY driver will set the state to READY
+ * - start will set the state to PENDING
+ *
+ * READY: PHY is ready to send and receive packets, but the
+ * controller is not.  By default, PHYs which do not implement
+ * probe will be set to this state by phy_probe().  If the PHY
+ * driver knows the PHY is ready, and the PHY state is STARTING,
+ * then it sets this STATE.
+ * - start will set the state to UP
+ *
+ * PENDING: PHY device is coming up, but the ethernet driver is
+ * ready.  phy_start will set this state if the PHY state is
+ * STARTING.
+ * - PHY driver will set the state to UP when the PHY is ready
+ *
+ * UP: The PHY and attached device are ready to do work.
+ * Interrupts should be started here.
+ * - timer moves to AN
+ *
+ * AN: The PHY is currently negotiating the link state.  Link is
+ * therefore down for now.  phy_timer will set this state when it
+ * detects the state is UP.  config_aneg will set this state
+ * whenever called with phydev->autoneg set to AUTONEG_ENABLE.
+ * - If autonegotiation finishes, but there's no link, it sets
+ *   the state to NOLINK.
+ * - If aneg finishes with link, it sets the state to RUNNING,
+ *   and calls adjust_link
+ * - If autonegotiation did not finish after an arbitrary amount
+ *   of time, autonegotiation should be tried again if the PHY
+ *   supports "magic" autonegotiation (back to AN)
+ * - If it didn't finish, and no magic_aneg, move to FORCING.
+ *
+ * NOLINK: PHY is up, but not currently plugged in.
+ * - If the timer notes that the link comes back, we move to RUNNING
+ * - config_aneg moves to AN
+ * - phy_stop moves to HALTED
+ *
+ * FORCING: PHY is being configured with forced settings
+ * - if link is up, move to RUNNING
+ * - If link is down, we drop to the next highest setting, and
+ *   retry (FORCING) after a timeout
+ * - phy_stop moves to HALTED
+ *
+ * RUNNING: PHY is currently up, running, and possibly sending
+ * and/or receiving packets
+ * - timer will set CHANGELINK if we're polling (this ensures the
+ *   link state is polled every other cycle of this state machine,
+ *   which makes it every other second)
+ * - irq will set CHANGELINK
+ * - config_aneg will set AN
+ * - phy_stop moves to HALTED
+ *
+ * CHANGELINK: PHY experienced a change in link state
+ * - timer moves to RUNNING if link
+ * - timer moves to NOLINK if the link is down
+ * - phy_stop moves to HALTED
+ *
+ * HALTED: PHY is up, but no polling or interrupts are done. Or
+ * PHY is in an error state.
+ *
+ * - phy_start moves to RESUMING
+ *
+ * RESUMING: PHY was halted, but now wants to run again.
+ * - If we are forcing, or aneg is done, timer moves to RUNNING
+ * - If aneg is not done, timer moves to AN
+ * - phy_stop moves to HALTED
+ */
+enum phy_state {
+	PHY_DOWN=0,
+	PHY_STARTING,
+	PHY_READY,
+	PHY_PENDING,
+	PHY_UP,
+	PHY_AN,
+	PHY_RUNNING,
+	PHY_NOLINK,
+	PHY_FORCING,
+	PHY_CHANGELINK,
+	PHY_HALTED,
+	PHY_RESUMING
+};
+
+
+/* phy_device: An instance of a PHY
+ *
+ * drv: Pointer to the driver for this PHY instance
+ * bus: Pointer to the bus this PHY is on
+ * dev: driver model device structure for this PHY
+ * phy_id: UID for this device found during discovery
+ * state: state of the PHY for management purposes
+ * dev_flags: Device-specific flags used by the PHY driver.
+ * addr: Bus address of PHY
+ * link_timeout: The number of timer firings to wait before the
+ * giving up on the current attempt at acquiring a link
+ * irq: IRQ number of the PHY's interrupt (-1 if none)
+ * phy_timer: The timer for handling the state machine
+ * phy_queue: A work_queue for the interrupt
+ * attached_dev: The attached enet driver's device instance ptr
+ * adjust_link: Callback for the enet controller to respond to
+ * changes in the link state.
+ * adjust_state: Callback for the enet driver to respond to
+ * changes in the state machine.
+ *
+ * speed, duplex, pause, supported, advertising, and
+ * autoneg are used like in mii_if_info
+ *
+ * interrupts currently only supports enabled or disabled,
+ * but could be changed in the future to support enabling
+ * and disabling specific interrupts
+ *
+ * Contains some infrastructure for polling and interrupt
+ * handling, as well as handling shifts in PHY hardware state
+ */
+struct phy_device {
+	/* Information about the PHY type */
+	/* And management functions */
+	struct phy_driver *drv;
+
+	struct mii_bus *bus;
+
+	struct device dev;
+
+	u32 phy_id;
+
+	enum phy_state state;
+
+	u32 dev_flags;
+
+	phy_interface_t interface;
+
+	/* Bus address of the PHY (0-31) */
+	int addr;
+
+	/*
+	 * forced speed & duplex (no autoneg)
+	 * partner speed & duplex & pause (autoneg)
+	 */
+	int speed;
+	int duplex;
+	int pause;
+	int asym_pause;
+
+	/* The most recently read link state */
+	int link;
+
+	/* Enabled Interrupts */
+	u32 interrupts;
+
+	/* Union of PHY and Attached devices' supported modes */
+	/* See mii.h for more info */
+	u32 supported;
+	u32 advertising;
+
+	int autoneg;
+
+	int link_timeout;
+
+	/*
+	 * Interrupt number for this PHY
+	 * -1 means no interrupt
+	 */
+	int irq;
+
+	/* private data pointer */
+	/* For use by PHYs to maintain extra state */
+	void *priv;
+
+	/* Interrupt and Polling infrastructure */
+	struct work_struct phy_queue;
+	struct delayed_work state_queue;
+	atomic_t irq_disable;
+
+	struct mutex lock;
+
+	struct net_device *attached_dev;
+
+	void (*adjust_link)(struct net_device *dev);
+
+	void (*adjust_state)(struct net_device *dev);
+};
+#define to_phy_device(d) container_of(d, struct phy_device, dev)
+
+/* struct phy_driver: Driver structure for a particular PHY type
+ *
+ * phy_id: The result of reading the UID registers of this PHY
+ *   type, and ANDing them with the phy_id_mask.  This driver
+ *   only works for PHYs with IDs which match this field
+ * name: The friendly name of this PHY type
+ * phy_id_mask: Defines the important bits of the phy_id
+ * features: A list of features (speed, duplex, etc) supported
+ *   by this PHY
+ * flags: A bitfield defining certain other features this PHY
+ *   supports (like interrupts)
+ *
+ * The drivers must implement config_aneg and read_status.  All
+ * other functions are optional. Note that none of these
+ * functions should be called from interrupt time.  The goal is
+ * for the bus read/write functions to be able to block when the
+ * bus transaction is happening, and be freed up by an interrupt
+ * (The MPC85xx has this ability, though it is not currently
+ * supported in the driver).
+ */
+struct phy_driver {
+	u32 phy_id;
+	char *name;
+	unsigned int phy_id_mask;
+	u32 features;
+	u32 flags;
+
+	/*
+	 * Called to initialize the PHY,
+	 * including after a reset
+	 */
+	int (*config_init)(struct phy_device *phydev);
+
+	/*
+	 * Called during discovery.  Used to set
+	 * up device-specific structures, if any
+	 */
+	int (*probe)(struct phy_device *phydev);
+
+	/* PHY Power Management */
+	int (*suspend)(struct phy_device *phydev);
+	int (*resume)(struct phy_device *phydev);
+
+	/*
+	 * Configures the advertisement and resets
+	 * autonegotiation if phydev->autoneg is on,
+	 * forces the speed to the current settings in phydev
+	 * if phydev->autoneg is off
+	 */
+	int (*config_aneg)(struct phy_device *phydev);
+
+	/* Determines the negotiated speed and duplex */
+	int (*read_status)(struct phy_device *phydev);
+
+	/* Clears any pending interrupts */
+	int (*ack_interrupt)(struct phy_device *phydev);
+
+	/* Enables or disables interrupts */
+	int (*config_intr)(struct phy_device *phydev);
+
+	/*
+	 * Checks if the PHY generated an interrupt.
+	 * For multi-PHY devices with shared PHY interrupt pin
+	 */
+	int (*did_interrupt)(struct phy_device *phydev);
+
+	/* Clears up any memory if needed */
+	void (*remove)(struct phy_device *phydev);
+
+	/* Handles SIOCSHWTSTAMP ioctl for hardware time stamping. */
+	int  (*hwtstamp)(struct phy_device *phydev, struct ifreq *ifr);
+
+	/*
+	 * Requests a Rx timestamp for 'skb'. If the skb is accepted,
+	 * the phy driver promises to deliver it using netif_rx() as
+	 * soon as a timestamp becomes available. One of the
+	 * PTP_CLASS_ values is passed in 'type'. The function must
+	 * return true if the skb is accepted for delivery.
+	 */
+	bool (*rxtstamp)(struct phy_device *dev, struct sk_buff *skb, int type);
+
+	/*
+	 * Requests a Tx timestamp for 'skb'. The phy driver promises
+	 * to deliver it using skb_complete_tx_timestamp() as soon as a
+	 * timestamp becomes available. One of the PTP_CLASS_ values
+	 * is passed in 'type'.
+	 */
+	void (*txtstamp)(struct phy_device *dev, struct sk_buff *skb, int type);
+
+	struct device_driver driver;
+};
+#define to_phy_driver(d) container_of(d, struct phy_driver, driver)
+
+#define PHY_ANY_ID "MATCH ANY PHY"
+#define PHY_ANY_UID 0xffffffff
+
+/* A Structure for boards to register fixups with the PHY Lib */
+struct phy_fixup {
+	struct list_head list;
+	char bus_id[20];
+	u32 phy_uid;
+	u32 phy_uid_mask;
+	int (*run)(struct phy_device *phydev);
+};
+
+/**
+ * phy_read - Convenience function for reading a given PHY register
+ * @phydev: the phy_device struct
+ * @regnum: register number to read
+ *
+ * NOTE: MUST NOT be called from interrupt context,
+ * because the bus read/write functions may wait for an interrupt
+ * to conclude the operation.
+ */
+static inline int phy_read(struct phy_device *phydev, u32 regnum)
+{
+	return mdiobus_read(phydev->bus, phydev->addr, regnum);
+}
+
+/**
+ * phy_write - Convenience function for writing a given PHY register
+ * @phydev: the phy_device struct
+ * @regnum: register number to write
+ * @val: value to write to @regnum
+ *
+ * NOTE: MUST NOT be called from interrupt context,
+ * because the bus read/write functions may wait for an interrupt
+ * to conclude the operation.
+ */
+static inline int phy_write(struct phy_device *phydev, u32 regnum, u16 val)
+{
+	return mdiobus_write(phydev->bus, phydev->addr, regnum, val);
+}
+
+int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id);
+struct phy_device* get_phy_device(struct mii_bus *bus, int addr);
+int phy_device_register(struct phy_device *phy);
+int phy_init_hw(struct phy_device *phydev);
+struct phy_device * phy_attach(struct net_device *dev,
+		const char *bus_id, u32 flags, phy_interface_t interface);
+struct phy_device *phy_find_first(struct mii_bus *bus);
+int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
+		void (*handler)(struct net_device *), u32 flags,
+		phy_interface_t interface);
+struct phy_device * phy_connect(struct net_device *dev, const char *bus_id,
+		void (*handler)(struct net_device *), u32 flags,
+		phy_interface_t interface);
+void phy_disconnect(struct phy_device *phydev);
+void phy_detach(struct phy_device *phydev);
+void phy_start(struct phy_device *phydev);
+void phy_stop(struct phy_device *phydev);
+int phy_start_aneg(struct phy_device *phydev);
+
+int phy_stop_interrupts(struct phy_device *phydev);
+
+static inline int phy_read_status(struct phy_device *phydev) {
+	return phydev->drv->read_status(phydev);
+}
+
+int genphy_restart_aneg(struct phy_device *phydev);
+int genphy_config_aneg(struct phy_device *phydev);
+int genphy_update_link(struct phy_device *phydev);
+int genphy_read_status(struct phy_device *phydev);
+int genphy_suspend(struct phy_device *phydev);
+int genphy_resume(struct phy_device *phydev);
+void phy_driver_unregister(struct phy_driver *drv);
+int phy_driver_register(struct phy_driver *new_driver);
+void phy_state_machine(struct work_struct *work);
+void phy_start_machine(struct phy_device *phydev,
+		void (*handler)(struct net_device *));
+void phy_stop_machine(struct phy_device *phydev);
+int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
+int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
+int phy_mii_ioctl(struct phy_device *phydev,
+		struct ifreq *ifr, int cmd);
+int phy_start_interrupts(struct phy_device *phydev);
+void phy_print_status(struct phy_device *phydev);
+void phy_device_free(struct phy_device *phydev);
+
+int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
+		int (*run)(struct phy_device *));
+int phy_register_fixup_for_id(const char *bus_id,
+		int (*run)(struct phy_device *));
+int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
+		int (*run)(struct phy_device *));
+int phy_scan_fixups(struct phy_device *phydev);
+
+int __init mdio_bus_init(void);
+void mdio_bus_exit(void);
+
+extern struct bus_type mdio_bus_type;
+#endif /* __PHY_H */
diff --git a/include/linux/phy_fixed.h b/include/linux/phy_fixed.h
new file mode 100644
index 00000000..509d8f5f
--- /dev/null
+++ b/include/linux/phy_fixed.h
@@ -0,0 +1,31 @@
+#ifndef __PHY_FIXED_H
+#define __PHY_FIXED_H
+
+struct fixed_phy_status {
+	int link;
+	int speed;
+	int duplex;
+	int pause;
+	int asym_pause;
+};
+
+#ifdef CONFIG_FIXED_PHY
+extern int fixed_phy_add(unsigned int irq, int phy_id,
+			 struct fixed_phy_status *status);
+#else
+static inline int fixed_phy_add(unsigned int irq, int phy_id,
+				struct fixed_phy_status *status)
+{
+	return -ENODEV;
+}
+#endif /* CONFIG_FIXED_PHY */
+
+/*
+ * This function issued only by fixed_phy-aware drivers, no need
+ * protect it with #ifdef
+ */
+extern int fixed_phy_set_link_update(struct phy_device *phydev,
+			int (*link_update)(struct net_device *,
+					   struct fixed_phy_status *));
+
+#endif /* __PHY_FIXED_H */
diff --git a/include/linux/pid.h b/include/linux/pid.h
new file mode 100644
index 00000000..b152d44f
--- /dev/null
+++ b/include/linux/pid.h
@@ -0,0 +1,202 @@
+#ifndef _LINUX_PID_H
+#define _LINUX_PID_H
+
+#include <linux/rcupdate.h>
+
+enum pid_type
+{
+	PIDTYPE_PID,
+	PIDTYPE_PGID,
+	PIDTYPE_SID,
+	PIDTYPE_MAX
+};
+
+/*
+ * What is struct pid?
+ *
+ * A struct pid is the kernel's internal notion of a process identifier.
+ * It refers to individual tasks, process groups, and sessions.  While
+ * there are processes attached to it the struct pid lives in a hash
+ * table, so it and then the processes that it refers to can be found
+ * quickly from the numeric pid value.  The attached processes may be
+ * quickly accessed by following pointers from struct pid.
+ *
+ * Storing pid_t values in the kernel and referring to them later has a
+ * problem.  The process originally with that pid may have exited and the
+ * pid allocator wrapped, and another process could have come along
+ * and been assigned that pid.
+ *
+ * Referring to user space processes by holding a reference to struct
+ * task_struct has a problem.  When the user space process exits
+ * the now useless task_struct is still kept.  A task_struct plus a
+ * stack consumes around 10K of low kernel memory.  More precisely
+ * this is THREAD_SIZE + sizeof(struct task_struct).  By comparison
+ * a struct pid is about 64 bytes.
+ *
+ * Holding a reference to struct pid solves both of these problems.
+ * It is small so holding a reference does not consume a lot of
+ * resources, and since a new struct pid is allocated when the numeric pid
+ * value is reused (when pids wrap around) we don't mistakenly refer to new
+ * processes.
+ */
+
+
+/*
+ * struct upid is used to get the id of the struct pid, as it is
+ * seen in particular namespace. Later the struct pid is found with
+ * find_pid_ns() using the int nr and struct pid_namespace *ns.
+ */
+
+struct upid {
+	/* Try to keep pid_chain in the same cacheline as nr for find_vpid */
+	int nr;
+	struct pid_namespace *ns;
+	struct hlist_node pid_chain;
+};
+
+struct pid
+{
+	atomic_t count;
+	unsigned int level;
+	/* lists of tasks that use this pid */
+	struct hlist_head tasks[PIDTYPE_MAX];
+	struct rcu_head rcu;
+	struct upid numbers[1];
+};
+
+extern struct pid init_struct_pid;
+
+struct pid_link
+{
+	struct hlist_node node;
+	struct pid *pid;
+};
+
+static inline struct pid *get_pid(struct pid *pid)
+{
+	if (pid)
+		atomic_inc(&pid->count);
+	return pid;
+}
+
+extern void put_pid(struct pid *pid);
+extern struct task_struct *pid_task(struct pid *pid, enum pid_type);
+extern struct task_struct *get_pid_task(struct pid *pid, enum pid_type);
+
+extern struct pid *get_task_pid(struct task_struct *task, enum pid_type type);
+
+/*
+ * attach_pid() and detach_pid() must be called with the tasklist_lock
+ * write-held.
+ */
+extern void attach_pid(struct task_struct *task, enum pid_type type,
+			struct pid *pid);
+extern void detach_pid(struct task_struct *task, enum pid_type);
+extern void change_pid(struct task_struct *task, enum pid_type,
+			struct pid *pid);
+extern void transfer_pid(struct task_struct *old, struct task_struct *new,
+			 enum pid_type);
+
+struct pid_namespace;
+extern struct pid_namespace init_pid_ns;
+
+/*
+ * look up a PID in the hash table. Must be called with the tasklist_lock
+ * or rcu_read_lock() held.
+ *
+ * find_pid_ns() finds the pid in the namespace specified
+ * find_vpid() finds the pid by its virtual id, i.e. in the current namespace
+ *
+ * see also find_task_by_vpid() set in include/linux/sched.h
+ */
+extern struct pid *find_pid_ns(int nr, struct pid_namespace *ns);
+extern struct pid *find_vpid(int nr);
+
+/*
+ * Lookup a PID in the hash table, and return with it's count elevated.
+ */
+extern struct pid *find_get_pid(int nr);
+extern struct pid *find_ge_pid(int nr, struct pid_namespace *);
+int next_pidmap(struct pid_namespace *pid_ns, unsigned int last);
+
+extern struct pid *alloc_pid(struct pid_namespace *ns);
+extern void free_pid(struct pid *pid);
+
+/*
+ * ns_of_pid() returns the pid namespace in which the specified pid was
+ * allocated.
+ *
+ * NOTE:
+ * 	ns_of_pid() is expected to be called for a process (task) that has
+ * 	an attached 'struct pid' (see attach_pid(), detach_pid()) i.e @pid
+ * 	is expected to be non-NULL. If @pid is NULL, caller should handle
+ * 	the resulting NULL pid-ns.
+ */
+static inline struct pid_namespace *ns_of_pid(struct pid *pid)
+{
+	struct pid_namespace *ns = NULL;
+	if (pid)
+		ns = pid->numbers[pid->level].ns;
+	return ns;
+}
+
+/*
+ * is_child_reaper returns true if the pid is the init process
+ * of the current namespace. As this one could be checked before
+ * pid_ns->child_reaper is assigned in copy_process, we check
+ * with the pid number.
+ */
+static inline bool is_child_reaper(struct pid *pid)
+{
+	return pid->numbers[pid->level].nr == 1;
+}
+
+/*
+ * the helpers to get the pid's id seen from different namespaces
+ *
+ * pid_nr()    : global id, i.e. the id seen from the init namespace;
+ * pid_vnr()   : virtual id, i.e. the id seen from the pid namespace of
+ *               current.
+ * pid_nr_ns() : id seen from the ns specified.
+ *
+ * see also task_xid_nr() etc in include/linux/sched.h
+ */
+
+static inline pid_t pid_nr(struct pid *pid)
+{
+	pid_t nr = 0;
+	if (pid)
+		nr = pid->numbers[0].nr;
+	return nr;
+}
+
+pid_t pid_nr_ns(struct pid *pid, struct pid_namespace *ns);
+pid_t pid_vnr(struct pid *pid);
+
+#define do_each_pid_task(pid, type, task)				\
+	do {								\
+		struct hlist_node *pos___;				\
+		if ((pid) != NULL)					\
+			hlist_for_each_entry_rcu((task), pos___,	\
+				&(pid)->tasks[type], pids[type].node) {
+
+			/*
+			 * Both old and new leaders may be attached to
+			 * the same pid in the middle of de_thread().
+			 */
+#define while_each_pid_task(pid, type, task)				\
+				if (type == PIDTYPE_PID)		\
+					break;				\
+			}						\
+	} while (0)
+
+#define do_each_pid_thread(pid, type, task)				\
+	do_each_pid_task(pid, type, task) {				\
+		struct task_struct *tg___ = task;			\
+		do {
+
+#define while_each_pid_thread(pid, type, task)				\
+		} while_each_thread(tg___, task);			\
+		task = tg___;						\
+	} while_each_pid_task(pid, type, task)
+#endif /* _LINUX_PID_H */
diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h
new file mode 100644
index 00000000..b067bd8c
--- /dev/null
+++ b/include/linux/pid_namespace.h
@@ -0,0 +1,95 @@
+#ifndef _LINUX_PID_NS_H
+#define _LINUX_PID_NS_H
+
+#include <linux/sched.h>
+#include <linux/bug.h>
+#include <linux/mm.h>
+#include <linux/threads.h>
+#include <linux/nsproxy.h>
+#include <linux/kref.h>
+
+struct pidmap {
+       atomic_t nr_free;
+       void *page;
+};
+
+#define PIDMAP_ENTRIES         ((PID_MAX_LIMIT + 8*PAGE_SIZE - 1)/PAGE_SIZE/8)
+
+struct bsd_acct_struct;
+
+struct pid_namespace {
+	struct kref kref;
+	struct pidmap pidmap[PIDMAP_ENTRIES];
+	int last_pid;
+	struct task_struct *child_reaper;
+	struct kmem_cache *pid_cachep;
+	unsigned int level;
+	struct pid_namespace *parent;
+#ifdef CONFIG_PROC_FS
+	struct vfsmount *proc_mnt;
+#endif
+#ifdef CONFIG_BSD_PROCESS_ACCT
+	struct bsd_acct_struct *bacct;
+#endif
+	gid_t pid_gid;
+	int hide_pid;
+	int reboot;	/* group exit code if this pidns was rebooted */
+};
+
+extern struct pid_namespace init_pid_ns;
+
+#ifdef CONFIG_PID_NS
+static inline struct pid_namespace *get_pid_ns(struct pid_namespace *ns)
+{
+	if (ns != &init_pid_ns)
+		kref_get(&ns->kref);
+	return ns;
+}
+
+extern struct pid_namespace *copy_pid_ns(unsigned long flags, struct pid_namespace *ns);
+extern void free_pid_ns(struct kref *kref);
+extern void zap_pid_ns_processes(struct pid_namespace *pid_ns);
+extern int reboot_pid_ns(struct pid_namespace *pid_ns, int cmd);
+
+static inline void put_pid_ns(struct pid_namespace *ns)
+{
+	if (ns != &init_pid_ns)
+		kref_put(&ns->kref, free_pid_ns);
+}
+
+#else /* !CONFIG_PID_NS */
+#include <linux/err.h>
+
+static inline struct pid_namespace *get_pid_ns(struct pid_namespace *ns)
+{
+	return ns;
+}
+
+static inline struct pid_namespace *
+copy_pid_ns(unsigned long flags, struct pid_namespace *ns)
+{
+	if (flags & CLONE_NEWPID)
+		ns = ERR_PTR(-EINVAL);
+	return ns;
+}
+
+static inline void put_pid_ns(struct pid_namespace *ns)
+{
+}
+
+static inline void zap_pid_ns_processes(struct pid_namespace *ns)
+{
+	BUG();
+}
+
+static inline int reboot_pid_ns(struct pid_namespace *pid_ns, int cmd)
+{
+	return 0;
+}
+#endif /* CONFIG_PID_NS */
+
+extern struct pid_namespace *task_active_pid_ns(struct task_struct *tsk);
+void pidhash_init(void);
+void pidmap_init(void);
+
+#endif /* _LINUX_PID_NS_H */
diff --git a/include/linux/pim.h b/include/linux/pim.h
new file mode 100644
index 00000000..252bf664
--- /dev/null
+++ b/include/linux/pim.h
@@ -0,0 +1,27 @@
+#ifndef __LINUX_PIM_H
+#define __LINUX_PIM_H
+
+#include <asm/byteorder.h>
+
+/* Message types - V1 */
+#define PIM_V1_VERSION		cpu_to_be32(0x10000000)
+#define PIM_V1_REGISTER		1
+
+/* Message types - V2 */
+#define PIM_VERSION		2
+#define PIM_REGISTER		1
+
+#define PIM_NULL_REGISTER	cpu_to_be32(0x40000000)
+
+/* PIMv2 register message header layout (ietf-draft-idmr-pimvsm-v2-00.ps */
+struct pimreghdr
+{
+	__u8	type;
+	__u8	reserved;
+	__be16	csum;
+	__be32	flags;
+};
+
+struct sk_buff;
+extern int pim_rcv_v1(struct sk_buff *);
+#endif
diff --git a/include/linux/pinctrl/consumer.h b/include/linux/pinctrl/consumer.h
new file mode 100644
index 00000000..191e7268
--- /dev/null
+++ b/include/linux/pinctrl/consumer.h
@@ -0,0 +1,159 @@
+/*
+ * Consumer interface the pin control subsystem
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ * Based on bits of regulator core, gpio core and clk core
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef __LINUX_PINCTRL_CONSUMER_H
+#define __LINUX_PINCTRL_CONSUMER_H
+
+#include <linux/err.h>
+#include <linux/list.h>
+#include <linux/seq_file.h>
+#include "pinctrl-state.h"
+
+/* This struct is private to the core and should be regarded as a cookie */
+struct pinctrl;
+struct pinctrl_state;
+
+#ifdef CONFIG_PINCTRL
+
+/* External interface to pin control */
+extern int pinctrl_request_gpio(unsigned gpio);
+extern void pinctrl_free_gpio(unsigned gpio);
+extern int pinctrl_gpio_direction_input(unsigned gpio);
+extern int pinctrl_gpio_direction_output(unsigned gpio);
+
+extern struct pinctrl * __must_check pinctrl_get(struct device *dev);
+extern void pinctrl_put(struct pinctrl *p);
+extern struct pinctrl_state * __must_check pinctrl_lookup_state(
+							struct pinctrl *p,
+							const char *name);
+extern int pinctrl_select_state(struct pinctrl *p, struct pinctrl_state *s);
+
+#else /* !CONFIG_PINCTRL */
+
+static inline int pinctrl_request_gpio(unsigned gpio)
+{
+	return 0;
+}
+
+static inline void pinctrl_free_gpio(unsigned gpio)
+{
+}
+
+static inline int pinctrl_gpio_direction_input(unsigned gpio)
+{
+	return 0;
+}
+
+static inline int pinctrl_gpio_direction_output(unsigned gpio)
+{
+	return 0;
+}
+
+static inline struct pinctrl * __must_check pinctrl_get(struct device *dev)
+{
+	return NULL;
+}
+
+static inline void pinctrl_put(struct pinctrl *p)
+{
+}
+
+static inline struct pinctrl_state * __must_check pinctrl_lookup_state(
+							struct pinctrl *p,
+							const char *name)
+{
+	return NULL;
+}
+
+static inline int pinctrl_select_state(struct pinctrl *p,
+				       struct pinctrl_state *s)
+{
+	return 0;
+}
+
+#endif /* CONFIG_PINCTRL */
+
+static inline struct pinctrl * __must_check pinctrl_get_select(
+					struct device *dev, const char *name)
+{
+	struct pinctrl *p;
+	struct pinctrl_state *s;
+	int ret;
+
+	p = pinctrl_get(dev);
+	if (IS_ERR(p))
+		return p;
+
+	s = pinctrl_lookup_state(p, name);
+	if (IS_ERR(s)) {
+		pinctrl_put(p);
+		return ERR_PTR(PTR_ERR(s));
+	}
+
+	ret = pinctrl_select_state(p, s);
+	if (ret < 0) {
+		pinctrl_put(p);
+		return ERR_PTR(ret);
+	}
+
+	return p;
+}
+
+static inline struct pinctrl * __must_check pinctrl_get_select_default(
+					struct device *dev)
+{
+	return pinctrl_get_select(dev, PINCTRL_STATE_DEFAULT);
+}
+
+#ifdef CONFIG_PINCONF
+
+extern int pin_config_get(const char *dev_name, const char *name,
+			  unsigned long *config);
+extern int pin_config_set(const char *dev_name, const char *name,
+			  unsigned long config);
+extern int pin_config_group_get(const char *dev_name,
+				const char *pin_group,
+				unsigned long *config);
+extern int pin_config_group_set(const char *dev_name,
+				const char *pin_group,
+				unsigned long config);
+
+#else
+
+static inline int pin_config_get(const char *dev_name, const char *name,
+				 unsigned long *config)
+{
+	return 0;
+}
+
+static inline int pin_config_set(const char *dev_name, const char *name,
+				 unsigned long config)
+{
+	return 0;
+}
+
+static inline int pin_config_group_get(const char *dev_name,
+				       const char *pin_group,
+				       unsigned long *config)
+{
+	return 0;
+}
+
+static inline int pin_config_group_set(const char *dev_name,
+				       const char *pin_group,
+				       unsigned long config)
+{
+	return 0;
+}
+
+#endif
+
+#endif /* __LINUX_PINCTRL_CONSUMER_H */
diff --git a/include/linux/pinctrl/machine.h b/include/linux/pinctrl/machine.h
new file mode 100644
index 00000000..e4d1de74
--- /dev/null
+++ b/include/linux/pinctrl/machine.h
@@ -0,0 +1,167 @@
+/*
+ * Machine interface for the pinctrl subsystem.
+ *
+ * Copyright (C) 2011 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ * Based on bits of regulator core, gpio core and clk core
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef __LINUX_PINCTRL_MACHINE_H
+#define __LINUX_PINCTRL_MACHINE_H
+
+#include <linux/bug.h>
+
+#include "pinctrl-state.h"
+
+enum pinctrl_map_type {
+	PIN_MAP_TYPE_INVALID,
+	PIN_MAP_TYPE_DUMMY_STATE,
+	PIN_MAP_TYPE_MUX_GROUP,
+	PIN_MAP_TYPE_CONFIGS_PIN,
+	PIN_MAP_TYPE_CONFIGS_GROUP,
+};
+
+/**
+ * struct pinctrl_map_mux - mapping table content for MAP_TYPE_MUX_GROUP
+ * @group: the name of the group whose mux function is to be configured. This
+ *	field may be left NULL, and the first applicable group for the function
+ *	will be used.
+ * @function: the mux function to select for the group
+ */
+struct pinctrl_map_mux {
+	const char *group;
+	const char *function;
+};
+
+/**
+ * struct pinctrl_map_configs - mapping table content for MAP_TYPE_CONFIGS_*
+ * @group_or_pin: the name of the pin or group whose configuration parameters
+ *	are to be configured.
+ * @configs: a pointer to an array of config parameters/values to program into
+ *	hardware. Each individual pin controller defines the format and meaning
+ *	of config parameters.
+ * @num_configs: the number of entries in array @configs
+ */
+struct pinctrl_map_configs {
+	const char *group_or_pin;
+	unsigned long *configs;
+	unsigned num_configs;
+};
+
+/**
+ * struct pinctrl_map - boards/machines shall provide this map for devices
+ * @dev_name: the name of the device using this specific mapping, the name
+ *	must be the same as in your struct device*. If this name is set to the
+ *	same name as the pin controllers own dev_name(), the map entry will be
+ *	hogged by the driver itself upon registration
+ * @name: the name of this specific map entry for the particular machine.
+ *	This is the parameter passed to pinmux_lookup_state()
+ * @type: the type of mapping table entry
+ * @ctrl_dev_name: the name of the device controlling this specific mapping,
+ *	the name must be the same as in your struct device*. This field is not
+ *	used for PIN_MAP_TYPE_DUMMY_STATE
+ * @data: Data specific to the mapping type
+ */
+struct pinctrl_map {
+	const char *dev_name;
+	const char *name;
+	enum pinctrl_map_type type;
+	const char *ctrl_dev_name;
+	union {
+		struct pinctrl_map_mux mux;
+		struct pinctrl_map_configs configs;
+	} data;
+};
+
+/* Convenience macros to create mapping table entries */
+
+#define PIN_MAP_DUMMY_STATE(dev, state) \
+	{								\
+		.dev_name = dev,					\
+		.name = state,						\
+		.type = PIN_MAP_TYPE_DUMMY_STATE,			\
+	}
+
+#define PIN_MAP_MUX_GROUP(dev, state, pinctrl, grp, func)		\
+	{								\
+		.dev_name = dev,					\
+		.name = state,						\
+		.type = PIN_MAP_TYPE_MUX_GROUP,				\
+		.ctrl_dev_name = pinctrl,				\
+		.data.mux = {						\
+			.group = grp,					\
+			.function = func,				\
+		},							\
+	}
+
+#define PIN_MAP_MUX_GROUP_DEFAULT(dev, pinctrl, grp, func)		\
+	PIN_MAP_MUX_GROUP(dev, PINCTRL_STATE_DEFAULT, pinctrl, grp, func)
+
+#define PIN_MAP_MUX_GROUP_HOG(dev, state, grp, func)			\
+	PIN_MAP_MUX_GROUP(dev, state, dev, grp, func)
+
+#define PIN_MAP_MUX_GROUP_HOG_DEFAULT(dev, grp, func)			\
+	PIN_MAP_MUX_GROUP(dev, PINCTRL_STATE_DEFAULT, dev, grp, func)
+
+#define PIN_MAP_CONFIGS_PIN(dev, state, pinctrl, pin, cfgs)		\
+	{								\
+		.dev_name = dev,					\
+		.name = state,						\
+		.type = PIN_MAP_TYPE_CONFIGS_PIN,			\
+		.ctrl_dev_name = pinctrl,				\
+		.data.configs = {					\
+			.group_or_pin = pin,				\
+			.configs = cfgs,				\
+			.num_configs = ARRAY_SIZE(cfgs),		\
+		},							\
+	}
+
+#define PIN_MAP_CONFIGS_PIN_DEFAULT(dev, pinctrl, pin, cfgs)		\
+	PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_DEFAULT, pinctrl, pin, cfgs)
+
+#define PIN_MAP_CONFIGS_PIN_HOG(dev, state, pin, cfgs)			\
+	PIN_MAP_CONFIGS_PIN(dev, state, dev, pin, cfgs)
+
+#define PIN_MAP_CONFIGS_PIN_HOG_DEFAULT(dev, pin, cfgs)			\
+	PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_DEFAULT, dev, pin, cfgs)
+
+#define PIN_MAP_CONFIGS_GROUP(dev, state, pinctrl, grp, cfgs)		\
+	{								\
+		.dev_name = dev,					\
+		.name = state,						\
+		.type = PIN_MAP_TYPE_CONFIGS_GROUP,			\
+		.ctrl_dev_name = pinctrl,				\
+		.data.configs = {					\
+			.group_or_pin = grp,				\
+			.configs = cfgs,				\
+			.num_configs = ARRAY_SIZE(cfgs),		\
+		},							\
+	}
+
+#define PIN_MAP_CONFIGS_GROUP_DEFAULT(dev, pinctrl, grp, cfgs)		\
+	PIN_MAP_CONFIGS_GROUP(dev, PINCTRL_STATE_DEFAULT, pinctrl, grp, cfgs)
+
+#define PIN_MAP_CONFIGS_GROUP_HOG(dev, state, grp, cfgs)		\
+	PIN_MAP_CONFIGS_GROUP(dev, state, dev, grp, cfgs)
+
+#define PIN_MAP_CONFIGS_GROUP_HOG_DEFAULT(dev, grp, cfgs)		\
+	PIN_MAP_CONFIGS_GROUP(dev, PINCTRL_STATE_DEFAULT, dev, grp, cfgs)
+
+#ifdef CONFIG_PINCTRL
+
+extern int pinctrl_register_mappings(struct pinctrl_map const *map,
+				unsigned num_maps);
+
+#else
+
+static inline int pinctrl_register_mappings(struct pinctrl_map const *map,
+					   unsigned num_maps)
+{
+	return 0;
+}
+
+#endif /* !CONFIG_PINMUX */
+#endif
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
new file mode 100644
index 00000000..4f0abb9f
--- /dev/null
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -0,0 +1,114 @@
+/*
+ * Interface the generic pinconfig portions of the pinctrl subsystem
+ *
+ * Copyright (C) 2011 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ * This interface is used in the core to keep track of pins.
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef __LINUX_PINCTRL_PINCONF_GENERIC_H
+#define __LINUX_PINCTRL_PINCONF_GENERIC_H
+
+/*
+ * You shouldn't even be able to compile with these enums etc unless you're
+ * using generic pin config. That is why this is defined out.
+ */
+#ifdef CONFIG_GENERIC_PINCONF
+
+/**
+ * enum pin_config_param - possible pin configuration parameters
+ * @PIN_CONFIG_BIAS_DISABLE: disable any pin bias on the pin, a
+ *	transition from say pull-up to pull-down implies that you disable
+ *	pull-up in the process, this setting disables all biasing.
+ * @PIN_CONFIG_BIAS_HIGH_IMPEDANCE: the pin will be set to a high impedance
+ *	mode, also know as "third-state" (tristate) or "high-Z" or "floating".
+ *	On output pins this effectively disconnects the pin, which is useful
+ *	if for example some other pin is going to drive the signal connected
+ *	to it for a while. Pins used for input are usually always high
+ *	impedance.
+ * @PIN_CONFIG_BIAS_PULL_UP: the pin will be pulled up (usually with high
+ *	impedance to VDD). If the argument is != 0 pull-up is enabled,
+ *	if it is 0, pull-up is disabled.
+ * @PIN_CONFIG_BIAS_PULL_DOWN: the pin will be pulled down (usually with high
+ *	impedance to GROUND). If the argument is != 0 pull-down is enabled,
+ *	if it is 0, pull-down is disabled.
+ * @PIN_CONFIG_DRIVE_PUSH_PULL: the pin will be driven actively high and
+ *	low, this is the most typical case and is typically achieved with two
+ *	active transistors on the output. Sending this config will enabale
+ *	push-pull mode, the argument is ignored.
+ * @PIN_CONFIG_DRIVE_OPEN_DRAIN: the pin will be driven with open drain (open
+ *	collector) which means it is usually wired with other output ports
+ *	which are then pulled up with an external resistor. Sending this
+ *	config will enabale open drain mode, the argument is ignored.
+ * @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source
+ *	(open emitter). Sending this config will enabale open drain mode, the
+ *	argument is ignored.
+ * @PIN_CONFIG_INPUT_SCHMITT: this will configure an input pin to run in
+ *	schmitt-trigger mode. If the schmitt-trigger has adjustable hysteresis,
+ *	the threshold value is given on a custom format as argument when
+ *	setting pins to this mode. The argument zero turns the schmitt trigger
+ *	off.
+ * @PIN_CONFIG_INPUT_DEBOUNCE: this will configure the pin to debounce mode,
+ *	which means it will wait for signals to settle when reading inputs. The
+ *	argument gives the debounce time on a custom format. Setting the
+ *	argument to zero turns debouncing off.
+ * @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power
+ *	supplies, the argument to this parameter (on a custom format) tells
+ *	the driver which alternative power source to use.
+ * @PIN_CONFIG_LOW_POWER_MODE: this will configure the pin for low power
+ *	operation, if several modes of operation are supported these can be
+ *	passed in the argument on a custom form, else just use argument 1
+ *	to indicate low power mode, argument 0 turns low power mode off.
+ * @PIN_CONFIG_END: this is the last enumerator for pin configurations, if
+ *	you need to pass in custom configurations to the pin controller, use
+ *	PIN_CONFIG_END+1 as the base offset.
+ */
+enum pin_config_param {
+	PIN_CONFIG_BIAS_DISABLE,
+	PIN_CONFIG_BIAS_HIGH_IMPEDANCE,
+	PIN_CONFIG_BIAS_PULL_UP,
+	PIN_CONFIG_BIAS_PULL_DOWN,
+	PIN_CONFIG_DRIVE_PUSH_PULL,
+	PIN_CONFIG_DRIVE_OPEN_DRAIN,
+	PIN_CONFIG_DRIVE_OPEN_SOURCE,
+	PIN_CONFIG_INPUT_SCHMITT,
+	PIN_CONFIG_INPUT_DEBOUNCE,
+	PIN_CONFIG_POWER_SOURCE,
+	PIN_CONFIG_LOW_POWER_MODE,
+	PIN_CONFIG_END = 0x7FFF,
+};
+
+/*
+ * Helpful configuration macro to be used in tables etc.
+ */
+#define PIN_CONF_PACKED(p, a) ((a << 16) | ((unsigned long) p & 0xffffUL))
+
+/*
+ * The following inlines stuffs a configuration parameter and data value
+ * into and out of an unsigned long argument, as used by the generic pin config
+ * system. We put the parameter in the lower 16 bits and the argument in the
+ * upper 16 bits.
+ */
+
+static inline enum pin_config_param pinconf_to_config_param(unsigned long config)
+{
+	return (enum pin_config_param) (config & 0xffffUL);
+}
+
+static inline u16 pinconf_to_config_argument(unsigned long config)
+{
+	return (enum pin_config_param) ((config >> 16) & 0xffffUL);
+}
+
+static inline unsigned long pinconf_to_config_packed(enum pin_config_param param,
+						     u16 argument)
+{
+	return PIN_CONF_PACKED(param, argument);
+}
+
+#endif /* CONFIG_GENERIC_PINCONF */
+
+#endif /* __LINUX_PINCTRL_PINCONF_GENERIC_H */
diff --git a/include/linux/pinctrl/pinconf.h b/include/linux/pinctrl/pinconf.h
new file mode 100644
index 00000000..ec431f03
--- /dev/null
+++ b/include/linux/pinctrl/pinconf.h
@@ -0,0 +1,63 @@
+/*
+ * Interface the pinconfig portions of the pinctrl subsystem
+ *
+ * Copyright (C) 2011 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ * This interface is used in the core to keep track of pins.
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef __LINUX_PINCTRL_PINCONF_H
+#define __LINUX_PINCTRL_PINCONF_H
+
+#ifdef CONFIG_PINCONF
+
+struct pinctrl_dev;
+struct seq_file;
+
+/**
+ * struct pinconf_ops - pin config operations, to be implemented by
+ * pin configuration capable drivers.
+ * @is_generic: for pin controllers that want to use the generic interface,
+ *	this flag tells the framework that it's generic.
+ * @pin_config_get: get the config of a certain pin, if the requested config
+ *	is not available on this controller this should return -ENOTSUPP
+ *	and if it is available but disabled it should return -EINVAL
+ * @pin_config_get: get the config of a certain pin
+ * @pin_config_set: configure an individual pin
+ * @pin_config_group_get: get configurations for an entire pin group
+ * @pin_config_group_set: configure all pins in a group
+ * @pin_config_dbg_show: optional debugfs display hook that will provide
+ *	per-device info for a certain pin in debugfs
+ * @pin_config_group_dbg_show: optional debugfs display hook that will provide
+ *	per-device info for a certain group in debugfs
+ */
+struct pinconf_ops {
+#ifdef CONFIG_GENERIC_PINCONF
+	bool is_generic;
+#endif
+	int (*pin_config_get) (struct pinctrl_dev *pctldev,
+			       unsigned pin,
+			       unsigned long *config);
+	int (*pin_config_set) (struct pinctrl_dev *pctldev,
+			       unsigned pin,
+			       unsigned long config);
+	int (*pin_config_group_get) (struct pinctrl_dev *pctldev,
+				     unsigned selector,
+				     unsigned long *config);
+	int (*pin_config_group_set) (struct pinctrl_dev *pctldev,
+				     unsigned selector,
+				     unsigned long config);
+	void (*pin_config_dbg_show) (struct pinctrl_dev *pctldev,
+				     struct seq_file *s,
+				     unsigned offset);
+	void (*pin_config_group_dbg_show) (struct pinctrl_dev *pctldev,
+					   struct seq_file *s,
+					   unsigned selector);
+};
+
+#endif
+
+#endif /* __LINUX_PINCTRL_PINCONF_H */
diff --git a/include/linux/pinctrl/pinctrl-state.h b/include/linux/pinctrl/pinctrl-state.h
new file mode 100644
index 00000000..3920e28b
--- /dev/null
+++ b/include/linux/pinctrl/pinctrl-state.h
@@ -0,0 +1,6 @@
+/*
+ * Standard pin control state definitions
+ */
+
+#define PINCTRL_STATE_DEFAULT "default"
+#define PINCTRL_STATE_IDLE "idle"
diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h
new file mode 100644
index 00000000..4e9f0788
--- /dev/null
+++ b/include/linux/pinctrl/pinctrl.h
@@ -0,0 +1,136 @@
+/*
+ * Interface the pinctrl subsystem
+ *
+ * Copyright (C) 2011 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ * This interface is used in the core to keep track of pins.
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef __LINUX_PINCTRL_PINCTRL_H
+#define __LINUX_PINCTRL_PINCTRL_H
+
+#ifdef CONFIG_PINCTRL
+
+#include <linux/radix-tree.h>
+#include <linux/list.h>
+#include <linux/seq_file.h>
+#include "pinctrl-state.h"
+
+struct device;
+struct pinctrl_dev;
+struct pinmux_ops;
+struct pinconf_ops;
+struct gpio_chip;
+
+/**
+ * struct pinctrl_pin_desc - boards/machines provide information on their
+ * pins, pads or other muxable units in this struct
+ * @number: unique pin number from the global pin number space
+ * @name: a name for this pin
+ */
+struct pinctrl_pin_desc {
+	unsigned number;
+	const char *name;
+};
+
+/* Convenience macro to define a single named or anonymous pin descriptor */
+#define PINCTRL_PIN(a, b) { .number = a, .name = b }
+#define PINCTRL_PIN_ANON(a) { .number = a }
+
+/**
+ * struct pinctrl_gpio_range - each pin controller can provide subranges of
+ * the GPIO number space to be handled by the controller
+ * @node: list node for internal use
+ * @name: a name for the chip in this range
+ * @id: an ID number for the chip in this range
+ * @base: base offset of the GPIO range
+ * @pin_base: base pin number of the GPIO range
+ * @npins: number of pins in the GPIO range, including the base number
+ * @gc: an optional pointer to a gpio_chip
+ */
+struct pinctrl_gpio_range {
+	struct list_head node;
+	const char *name;
+	unsigned int id;
+	unsigned int base;
+	unsigned int pin_base;
+	unsigned int npins;
+	struct gpio_chip *gc;
+};
+
+/**
+ * struct pinctrl_ops - global pin control operations, to be implemented by
+ * pin controller drivers.
+ * @list_groups: list the number of selectable named groups available
+ *	in this pinmux driver, the core will begin on 0 and call this
+ *	repeatedly as long as it returns >= 0 to enumerate the groups
+ * @get_group_name: return the group name of the pin group
+ * @get_group_pins: return an array of pins corresponding to a certain
+ *	group selector @pins, and the size of the array in @num_pins
+ * @pin_dbg_show: optional debugfs display hook that will provide per-device
+ *	info for a certain pin in debugfs
+ */
+struct pinctrl_ops {
+	int (*list_groups) (struct pinctrl_dev *pctldev, unsigned selector);
+	const char *(*get_group_name) (struct pinctrl_dev *pctldev,
+				       unsigned selector);
+	int (*get_group_pins) (struct pinctrl_dev *pctldev,
+			       unsigned selector,
+			       const unsigned **pins,
+			       unsigned *num_pins);
+	void (*pin_dbg_show) (struct pinctrl_dev *pctldev, struct seq_file *s,
+			  unsigned offset);
+};
+
+/**
+ * struct pinctrl_desc - pin controller descriptor, register this to pin
+ * control subsystem
+ * @name: name for the pin controller
+ * @pins: an array of pin descriptors describing all the pins handled by
+ *	this pin controller
+ * @npins: number of descriptors in the array, usually just ARRAY_SIZE()
+ *	of the pins field above
+ * @pctlops: pin control operation vtable, to support global concepts like
+ *	grouping of pins, this is optional.
+ * @pmxops: pinmux operations vtable, if you support pinmuxing in your driver
+ * @confops: pin config operations vtable, if you support pin configuration in
+ *	your driver
+ * @owner: module providing the pin controller, used for refcounting
+ */
+struct pinctrl_desc {
+	const char *name;
+	struct pinctrl_pin_desc const *pins;
+	unsigned int npins;
+	struct pinctrl_ops *pctlops;
+	struct pinmux_ops *pmxops;
+	struct pinconf_ops *confops;
+	struct module *owner;
+};
+
+/* External interface to pin controller */
+extern struct pinctrl_dev *pinctrl_register(struct pinctrl_desc *pctldesc,
+				struct device *dev, void *driver_data);
+extern void pinctrl_unregister(struct pinctrl_dev *pctldev);
+extern bool pin_is_valid(struct pinctrl_dev *pctldev, int pin);
+extern void pinctrl_add_gpio_range(struct pinctrl_dev *pctldev,
+				struct pinctrl_gpio_range *range);
+extern void pinctrl_remove_gpio_range(struct pinctrl_dev *pctldev,
+				struct pinctrl_gpio_range *range);
+extern const char *pinctrl_dev_get_name(struct pinctrl_dev *pctldev);
+extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev);
+#else
+
+struct pinctrl_dev;
+
+/* Sufficiently stupid default functions when pinctrl is not in use */
+static inline bool pin_is_valid(struct pinctrl_dev *pctldev, int pin)
+{
+	return pin >= 0;
+}
+
+#endif /* !CONFIG_PINCTRL */
+
+#endif /* __LINUX_PINCTRL_PINCTRL_H */
diff --git a/include/linux/pinctrl/pinmux.h b/include/linux/pinctrl/pinmux.h
new file mode 100644
index 00000000..47e9237e
--- /dev/null
+++ b/include/linux/pinctrl/pinmux.h
@@ -0,0 +1,90 @@
+/*
+ * Interface the pinmux subsystem
+ *
+ * Copyright (C) 2011 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ * Based on bits of regulator core, gpio core and clk core
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef __LINUX_PINCTRL_PINMUX_H
+#define __LINUX_PINCTRL_PINMUX_H
+
+#include <linux/list.h>
+#include <linux/seq_file.h>
+#include "pinctrl.h"
+
+#ifdef CONFIG_PINMUX
+
+struct pinctrl_dev;
+
+/**
+ * struct pinmux_ops - pinmux operations, to be implemented by pin controller
+ * drivers that support pinmuxing
+ * @request: called by the core to see if a certain pin can be made available
+ *	available for muxing. This is called by the core to acquire the pins
+ *	before selecting any actual mux setting across a function. The driver
+ *	is allowed to answer "no" by returning a negative error code
+ * @free: the reverse function of the request() callback, frees a pin after
+ *	being requested
+ * @list_functions: list the number of selectable named functions available
+ *	in this pinmux driver, the core will begin on 0 and call this
+ *	repeatedly as long as it returns >= 0 to enumerate mux settings
+ * @get_function_name: return the function name of the muxing selector,
+ *	called by the core to figure out which mux setting it shall map a
+ *	certain device to
+ * @get_function_groups: return an array of groups names (in turn
+ *	referencing pins) connected to a certain function selector. The group
+ *	name can be used with the generic @pinctrl_ops to retrieve the
+ *	actual pins affected. The applicable groups will be returned in
+ *	@groups and the number of groups in @num_groups
+ * @enable: enable a certain muxing function with a certain pin group. The
+ *	driver does not need to figure out whether enabling this function
+ *	conflicts some other use of the pins in that group, such collisions
+ *	are handled by the pinmux subsystem. The @func_selector selects a
+ *	certain function whereas @group_selector selects a certain set of pins
+ *	to be used. On simple controllers the latter argument may be ignored
+ * @disable: disable a certain muxing selector with a certain pin group
+ * @gpio_request_enable: requests and enables GPIO on a certain pin.
+ *	Implement this only if you can mux every pin individually as GPIO. The
+ *	affected GPIO range is passed along with an offset(pin number) into that
+ *	specific GPIO range - function selectors and pin groups are orthogonal
+ *	to this, the core will however make sure the pins do not collide.
+ * @gpio_disable_free: free up GPIO muxing on a certain pin, the reverse of
+ *	@gpio_request_enable
+ * @gpio_set_direction: Since controllers may need different configurations
+ *	depending on whether the GPIO is configured as input or output,
+ *	a direction selector function may be implemented as a backing
+ *	to the GPIO controllers that need pin muxing.
+ */
+struct pinmux_ops {
+	int (*request) (struct pinctrl_dev *pctldev, unsigned offset);
+	int (*free) (struct pinctrl_dev *pctldev, unsigned offset);
+	int (*list_functions) (struct pinctrl_dev *pctldev, unsigned selector);
+	const char *(*get_function_name) (struct pinctrl_dev *pctldev,
+					  unsigned selector);
+	int (*get_function_groups) (struct pinctrl_dev *pctldev,
+				  unsigned selector,
+				  const char * const **groups,
+				  unsigned * const num_groups);
+	int (*enable) (struct pinctrl_dev *pctldev, unsigned func_selector,
+		       unsigned group_selector);
+	void (*disable) (struct pinctrl_dev *pctldev, unsigned func_selector,
+			 unsigned group_selector);
+	int (*gpio_request_enable) (struct pinctrl_dev *pctldev,
+				    struct pinctrl_gpio_range *range,
+				    unsigned offset);
+	void (*gpio_disable_free) (struct pinctrl_dev *pctldev,
+				   struct pinctrl_gpio_range *range,
+				   unsigned offset);
+	int (*gpio_set_direction) (struct pinctrl_dev *pctldev,
+				   struct pinctrl_gpio_range *range,
+				   unsigned offset,
+				   bool input);
+};
+
+#endif /* CONFIG_PINMUX */
+
+#endif /* __LINUX_PINCTRL_PINMUX_H */
diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h
new file mode 100644
index 00000000..e1ac1ce1
--- /dev/null
+++ b/include/linux/pipe_fs_i.h
@@ -0,0 +1,165 @@
+#ifndef _LINUX_PIPE_FS_I_H
+#define _LINUX_PIPE_FS_I_H
+
+#define PIPE_DEF_BUFFERS	16
+
+#define PIPE_BUF_FLAG_LRU	0x01	/* page is on the LRU */
+#define PIPE_BUF_FLAG_ATOMIC	0x02	/* was atomically mapped */
+#define PIPE_BUF_FLAG_GIFT	0x04	/* page is a gift */
+#define PIPE_BUF_FLAG_PACKET	0x08	/* read() as a packet */
+
+/**
+ *	struct pipe_buffer - a linux kernel pipe buffer
+ *	@page: the page containing the data for the pipe buffer
+ *	@offset: offset of data inside the @page
+ *	@len: length of data inside the @page
+ *	@ops: operations associated with this buffer. See @pipe_buf_operations.
+ *	@flags: pipe buffer flags. See above.
+ *	@private: private data owned by the ops.
+ **/
+struct pipe_buffer {
+	struct page *page;
+	unsigned int offset, len;
+	const struct pipe_buf_operations *ops;
+	unsigned int flags;
+	unsigned long private;
+};
+
+/**
+ *	struct pipe_inode_info - a linux kernel pipe
+ *	@wait: reader/writer wait point in case of empty/full pipe
+ *	@nrbufs: the number of non-empty pipe buffers in this pipe
+ *	@buffers: total number of buffers (should be a power of 2)
+ *	@curbuf: the current pipe buffer entry
+ *	@tmp_page: cached released page
+ *	@readers: number of current readers of this pipe
+ *	@writers: number of current writers of this pipe
+ *	@waiting_writers: number of writers blocked waiting for room
+ *	@r_counter: reader counter
+ *	@w_counter: writer counter
+ *	@fasync_readers: reader side fasync
+ *	@fasync_writers: writer side fasync
+ *	@inode: inode this pipe is attached to
+ *	@bufs: the circular array of pipe buffers
+ **/
+struct pipe_inode_info {
+	wait_queue_head_t wait;
+	unsigned int nrbufs, curbuf, buffers;
+	unsigned int readers;
+	unsigned int writers;
+	unsigned int waiting_writers;
+	unsigned int r_counter;
+	unsigned int w_counter;
+	struct page *tmp_page;
+	struct fasync_struct *fasync_readers;
+	struct fasync_struct *fasync_writers;
+	struct inode *inode;
+	struct pipe_buffer *bufs;
+};
+
+/*
+ * Note on the nesting of these functions:
+ *
+ * ->confirm()
+ *	->steal()
+ *	...
+ *	->map()
+ *	...
+ *	->unmap()
+ *
+ * That is, ->map() must be called on a confirmed buffer,
+ * same goes for ->steal(). See below for the meaning of each
+ * operation. Also see kerneldoc in fs/pipe.c for the pipe
+ * and generic variants of these hooks.
+ */
+struct pipe_buf_operations {
+	/*
+	 * This is set to 1, if the generic pipe read/write may coalesce
+	 * data into an existing buffer. If this is set to 0, a new pipe
+	 * page segment is always used for new data.
+	 */
+	int can_merge;
+
+	/*
+	 * ->map() returns a virtual address mapping of the pipe buffer.
+	 * The last integer flag reflects whether this should be an atomic
+	 * mapping or not. The atomic map is faster, however you can't take
+	 * page faults before calling ->unmap() again. So if you need to eg
+	 * access user data through copy_to/from_user(), then you must get
+	 * a non-atomic map. ->map() uses the KM_USER0 atomic slot for
+	 * atomic maps, so you can't map more than one pipe_buffer at once
+	 * and you have to be careful if mapping another page as source
+	 * or destination for a copy (IOW, it has to use something else
+	 * than KM_USER0).
+	 */
+	void * (*map)(struct pipe_inode_info *, struct pipe_buffer *, int);
+
+	/*
+	 * Undoes ->map(), finishes the virtual mapping of the pipe buffer.
+	 */
+	void (*unmap)(struct pipe_inode_info *, struct pipe_buffer *, void *);
+
+	/*
+	 * ->confirm() verifies that the data in the pipe buffer is there
+	 * and that the contents are good. If the pages in the pipe belong
+	 * to a file system, we may need to wait for IO completion in this
+	 * hook. Returns 0 for good, or a negative error value in case of
+	 * error.
+	 */
+	int (*confirm)(struct pipe_inode_info *, struct pipe_buffer *);
+
+	/*
+	 * When the contents of this pipe buffer has been completely
+	 * consumed by a reader, ->release() is called.
+	 */
+	void (*release)(struct pipe_inode_info *, struct pipe_buffer *);
+
+	/*
+	 * Attempt to take ownership of the pipe buffer and its contents.
+	 * ->steal() returns 0 for success, in which case the contents
+	 * of the pipe (the buf->page) is locked and now completely owned
+	 * by the caller. The page may then be transferred to a different
+	 * mapping, the most often used case is insertion into different
+	 * file address space cache.
+	 */
+	int (*steal)(struct pipe_inode_info *, struct pipe_buffer *);
+
+	/*
+	 * Get a reference to the pipe buffer.
+	 */
+	void (*get)(struct pipe_inode_info *, struct pipe_buffer *);
+};
+
+/* Differs from PIPE_BUF in that PIPE_SIZE is the length of the actual
+   memory allocation, whereas PIPE_BUF makes atomicity guarantees.  */
+#define PIPE_SIZE		PAGE_SIZE
+
+/* Pipe lock and unlock operations */
+void pipe_lock(struct pipe_inode_info *);
+void pipe_unlock(struct pipe_inode_info *);
+void pipe_double_lock(struct pipe_inode_info *, struct pipe_inode_info *);
+
+extern unsigned int pipe_max_size, pipe_min_size;
+int pipe_proc_fn(struct ctl_table *, int, void __user *, size_t *, loff_t *);
+
+
+/* Drop the inode semaphore and wait for a pipe event, atomically */
+void pipe_wait(struct pipe_inode_info *pipe);
+
+struct pipe_inode_info * alloc_pipe_info(struct inode * inode);
+void free_pipe_info(struct inode * inode);
+void __free_pipe_info(struct pipe_inode_info *);
+
+/* Generic pipe buffer ops functions */
+void *generic_pipe_buf_map(struct pipe_inode_info *, struct pipe_buffer *, int);
+void generic_pipe_buf_unmap(struct pipe_inode_info *, struct pipe_buffer *, void *);
+void generic_pipe_buf_get(struct pipe_inode_info *, struct pipe_buffer *);
+int generic_pipe_buf_confirm(struct pipe_inode_info *, struct pipe_buffer *);
+int generic_pipe_buf_steal(struct pipe_inode_info *, struct pipe_buffer *);
+void generic_pipe_buf_release(struct pipe_inode_info *, struct pipe_buffer *);
+
+/* for F_SETPIPE_SZ and F_GETPIPE_SZ */
+long pipe_fcntl(struct file *, unsigned int, unsigned long arg);
+struct pipe_inode_info *get_pipe_info(struct file *file);
+
+#endif
diff --git a/include/linux/pkt_cls.h b/include/linux/pkt_cls.h
new file mode 100644
index 00000000..defbde20
--- /dev/null
+++ b/include/linux/pkt_cls.h
@@ -0,0 +1,467 @@
+#ifndef __LINUX_PKT_CLS_H
+#define __LINUX_PKT_CLS_H
+
+#include <linux/types.h>
+#include <linux/pkt_sched.h>
+
+/* I think i could have done better macros ; for now this is stolen from
+ * some arch/mips code - jhs
+*/
+#define _TC_MAKE32(x) ((x))
+
+#define _TC_MAKEMASK1(n) (_TC_MAKE32(1) << _TC_MAKE32(n))
+#define _TC_MAKEMASK(v,n) (_TC_MAKE32((_TC_MAKE32(1)<<(v))-1) << _TC_MAKE32(n))
+#define _TC_MAKEVALUE(v,n) (_TC_MAKE32(v) << _TC_MAKE32(n))
+#define _TC_GETVALUE(v,n,m) ((_TC_MAKE32(v) & _TC_MAKE32(m)) >> _TC_MAKE32(n))
+
+/* verdict bit breakdown 
+ *
+bit 0: when set -> this packet has been munged already
+
+bit 1: when set -> It is ok to munge this packet
+
+bit 2,3,4,5: Reclassify counter - sort of reverse TTL - if exceeded
+assume loop
+
+bit 6,7: Where this packet was last seen 
+0: Above the transmit example at the socket level
+1: on the Ingress
+2: on the Egress
+
+bit 8: when set --> Request not to classify on ingress. 
+
+bits 9,10,11: redirect counter -  redirect TTL. Loop avoidance
+
+ *
+ * */
+
+#define TC_MUNGED          _TC_MAKEMASK1(0)
+#define SET_TC_MUNGED(v)   ( TC_MUNGED | (v & ~TC_MUNGED))
+#define CLR_TC_MUNGED(v)   ( v & ~TC_MUNGED)
+
+#define TC_OK2MUNGE        _TC_MAKEMASK1(1)
+#define SET_TC_OK2MUNGE(v)   ( TC_OK2MUNGE | (v & ~TC_OK2MUNGE))
+#define CLR_TC_OK2MUNGE(v)   ( v & ~TC_OK2MUNGE)
+
+#define S_TC_VERD          _TC_MAKE32(2)
+#define M_TC_VERD          _TC_MAKEMASK(4,S_TC_VERD)
+#define G_TC_VERD(x)       _TC_GETVALUE(x,S_TC_VERD,M_TC_VERD)
+#define V_TC_VERD(x)       _TC_MAKEVALUE(x,S_TC_VERD)
+#define SET_TC_VERD(v,n)   ((V_TC_VERD(n)) | (v & ~M_TC_VERD))
+
+#define S_TC_FROM          _TC_MAKE32(6)
+#define M_TC_FROM          _TC_MAKEMASK(2,S_TC_FROM)
+#define G_TC_FROM(x)       _TC_GETVALUE(x,S_TC_FROM,M_TC_FROM)
+#define V_TC_FROM(x)       _TC_MAKEVALUE(x,S_TC_FROM)
+#define SET_TC_FROM(v,n)   ((V_TC_FROM(n)) | (v & ~M_TC_FROM))
+#define AT_STACK	0x0
+#define AT_INGRESS	0x1
+#define AT_EGRESS	0x2
+
+#define TC_NCLS          _TC_MAKEMASK1(8)
+#define SET_TC_NCLS(v)   ( TC_NCLS | (v & ~TC_NCLS))
+#define CLR_TC_NCLS(v)   ( v & ~TC_NCLS)
+
+#define S_TC_RTTL          _TC_MAKE32(9)
+#define M_TC_RTTL          _TC_MAKEMASK(3,S_TC_RTTL)
+#define G_TC_RTTL(x)       _TC_GETVALUE(x,S_TC_RTTL,M_TC_RTTL)
+#define V_TC_RTTL(x)       _TC_MAKEVALUE(x,S_TC_RTTL)
+#define SET_TC_RTTL(v,n)   ((V_TC_RTTL(n)) | (v & ~M_TC_RTTL))
+
+#define S_TC_AT          _TC_MAKE32(12)
+#define M_TC_AT          _TC_MAKEMASK(2,S_TC_AT)
+#define G_TC_AT(x)       _TC_GETVALUE(x,S_TC_AT,M_TC_AT)
+#define V_TC_AT(x)       _TC_MAKEVALUE(x,S_TC_AT)
+#define SET_TC_AT(v,n)   ((V_TC_AT(n)) | (v & ~M_TC_AT))
+
+/* Action attributes */
+enum {
+	TCA_ACT_UNSPEC,
+	TCA_ACT_KIND,
+	TCA_ACT_OPTIONS,
+	TCA_ACT_INDEX,
+	TCA_ACT_STATS,
+	__TCA_ACT_MAX
+};
+
+#define TCA_ACT_MAX __TCA_ACT_MAX
+#define TCA_OLD_COMPAT (TCA_ACT_MAX+1)
+#define TCA_ACT_MAX_PRIO 32
+#define TCA_ACT_BIND	1
+#define TCA_ACT_NOBIND	0
+#define TCA_ACT_UNBIND	1
+#define TCA_ACT_NOUNBIND	0
+#define TCA_ACT_REPLACE		1
+#define TCA_ACT_NOREPLACE	0
+#define MAX_REC_LOOP 4
+#define MAX_RED_LOOP 4
+
+#define TC_ACT_UNSPEC	(-1)
+#define TC_ACT_OK		0
+#define TC_ACT_RECLASSIFY	1
+#define TC_ACT_SHOT		2
+#define TC_ACT_PIPE		3
+#define TC_ACT_STOLEN		4
+#define TC_ACT_QUEUED		5
+#define TC_ACT_REPEAT		6
+#define TC_ACT_JUMP		0x10000000
+
+/* Action type identifiers*/
+enum {
+	TCA_ID_UNSPEC=0,
+	TCA_ID_POLICE=1,
+	/* other actions go here */
+	__TCA_ID_MAX=255
+};
+
+#define TCA_ID_MAX __TCA_ID_MAX
+
+struct tc_police {
+	__u32			index;
+	int			action;
+#define TC_POLICE_UNSPEC	TC_ACT_UNSPEC
+#define TC_POLICE_OK		TC_ACT_OK
+#define TC_POLICE_RECLASSIFY	TC_ACT_RECLASSIFY
+#define TC_POLICE_SHOT		TC_ACT_SHOT
+#define TC_POLICE_PIPE		TC_ACT_PIPE
+
+	__u32			limit;
+	__u32			burst;
+	__u32			mtu;
+	struct tc_ratespec	rate;
+	struct tc_ratespec	peakrate;
+	int 			refcnt;
+	int 			bindcnt;
+	__u32			capab;
+};
+
+struct tcf_t {
+	__u64   install;
+	__u64   lastuse;
+	__u64   expires;
+};
+
+struct tc_cnt {
+	int                   refcnt; 
+	int                   bindcnt;
+};
+
+#define tc_gen \
+	__u32                 index; \
+	__u32                 capab; \
+	int                   action; \
+	int                   refcnt; \
+	int                   bindcnt
+
+enum {
+	TCA_POLICE_UNSPEC,
+	TCA_POLICE_TBF,
+	TCA_POLICE_RATE,
+	TCA_POLICE_PEAKRATE,
+	TCA_POLICE_AVRATE,
+	TCA_POLICE_RESULT,
+	__TCA_POLICE_MAX
+#define TCA_POLICE_RESULT TCA_POLICE_RESULT
+};
+
+#define TCA_POLICE_MAX (__TCA_POLICE_MAX - 1)
+
+/* U32 filters */
+
+#define TC_U32_HTID(h) ((h)&0xFFF00000)
+#define TC_U32_USERHTID(h) (TC_U32_HTID(h)>>20)
+#define TC_U32_HASH(h) (((h)>>12)&0xFF)
+#define TC_U32_NODE(h) ((h)&0xFFF)
+#define TC_U32_KEY(h) ((h)&0xFFFFF)
+#define TC_U32_UNSPEC	0
+#define TC_U32_ROOT	(0xFFF00000)
+
+enum {
+	TCA_U32_UNSPEC,
+	TCA_U32_CLASSID,
+	TCA_U32_HASH,
+	TCA_U32_LINK,
+	TCA_U32_DIVISOR,
+	TCA_U32_SEL,
+	TCA_U32_POLICE,
+	TCA_U32_ACT,   
+	TCA_U32_INDEV,
+	TCA_U32_PCNT,
+	TCA_U32_MARK,
+	__TCA_U32_MAX
+};
+
+#define TCA_U32_MAX (__TCA_U32_MAX - 1)
+
+struct tc_u32_key {
+	__be32		mask;
+	__be32		val;
+	int		off;
+	int		offmask;
+};
+
+struct tc_u32_sel {
+	unsigned char		flags;
+	unsigned char		offshift;
+	unsigned char		nkeys;
+
+	__be16			offmask;
+	__u16			off;
+	short			offoff;
+
+	short			hoff;
+	__be32			hmask;
+	struct tc_u32_key	keys[0];
+};
+
+struct tc_u32_mark {
+	__u32		val;
+	__u32		mask;
+	__u32		success;
+};
+
+struct tc_u32_pcnt {
+	__u64 rcnt;
+	__u64 rhit;
+	__u64 kcnts[0];
+};
+
+/* Flags */
+
+#define TC_U32_TERMINAL		1
+#define TC_U32_OFFSET		2
+#define TC_U32_VAROFFSET	4
+#define TC_U32_EAT		8
+
+#define TC_U32_MAXDEPTH 8
+
+
+/* RSVP filter */
+
+enum {
+	TCA_RSVP_UNSPEC,
+	TCA_RSVP_CLASSID,
+	TCA_RSVP_DST,
+	TCA_RSVP_SRC,
+	TCA_RSVP_PINFO,
+	TCA_RSVP_POLICE,
+	TCA_RSVP_ACT,
+	__TCA_RSVP_MAX
+};
+
+#define TCA_RSVP_MAX (__TCA_RSVP_MAX - 1 )
+
+struct tc_rsvp_gpi {
+	__u32	key;
+	__u32	mask;
+	int	offset;
+};
+
+struct tc_rsvp_pinfo {
+	struct tc_rsvp_gpi dpi;
+	struct tc_rsvp_gpi spi;
+	__u8	protocol;
+	__u8	tunnelid;
+	__u8	tunnelhdr;
+	__u8	pad;
+};
+
+/* ROUTE filter */
+
+enum {
+	TCA_ROUTE4_UNSPEC,
+	TCA_ROUTE4_CLASSID,
+	TCA_ROUTE4_TO,
+	TCA_ROUTE4_FROM,
+	TCA_ROUTE4_IIF,
+	TCA_ROUTE4_POLICE,
+	TCA_ROUTE4_ACT,
+	__TCA_ROUTE4_MAX
+};
+
+#define TCA_ROUTE4_MAX (__TCA_ROUTE4_MAX - 1)
+
+
+/* FW filter */
+
+enum {
+	TCA_FW_UNSPEC,
+	TCA_FW_CLASSID,
+	TCA_FW_POLICE,
+	TCA_FW_INDEV, /*  used by CONFIG_NET_CLS_IND */
+	TCA_FW_ACT, /* used by CONFIG_NET_CLS_ACT */
+	TCA_FW_MASK,
+	__TCA_FW_MAX
+};
+
+#define TCA_FW_MAX (__TCA_FW_MAX - 1)
+
+/* TC index filter */
+
+enum {
+	TCA_TCINDEX_UNSPEC,
+	TCA_TCINDEX_HASH,
+	TCA_TCINDEX_MASK,
+	TCA_TCINDEX_SHIFT,
+	TCA_TCINDEX_FALL_THROUGH,
+	TCA_TCINDEX_CLASSID,
+	TCA_TCINDEX_POLICE,
+	TCA_TCINDEX_ACT,
+	__TCA_TCINDEX_MAX
+};
+
+#define TCA_TCINDEX_MAX     (__TCA_TCINDEX_MAX - 1)
+
+/* Flow filter */
+
+enum {
+	FLOW_KEY_SRC,
+	FLOW_KEY_DST,
+	FLOW_KEY_PROTO,
+	FLOW_KEY_PROTO_SRC,
+	FLOW_KEY_PROTO_DST,
+	FLOW_KEY_IIF,
+	FLOW_KEY_PRIORITY,
+	FLOW_KEY_MARK,
+	FLOW_KEY_NFCT,
+	FLOW_KEY_NFCT_SRC,
+	FLOW_KEY_NFCT_DST,
+	FLOW_KEY_NFCT_PROTO_SRC,
+	FLOW_KEY_NFCT_PROTO_DST,
+	FLOW_KEY_RTCLASSID,
+	FLOW_KEY_SKUID,
+	FLOW_KEY_SKGID,
+	FLOW_KEY_VLAN_TAG,
+	FLOW_KEY_RXHASH,
+	__FLOW_KEY_MAX,
+};
+
+#define FLOW_KEY_MAX	(__FLOW_KEY_MAX - 1)
+
+enum {
+	FLOW_MODE_MAP,
+	FLOW_MODE_HASH,
+};
+
+enum {
+	TCA_FLOW_UNSPEC,
+	TCA_FLOW_KEYS,
+	TCA_FLOW_MODE,
+	TCA_FLOW_BASECLASS,
+	TCA_FLOW_RSHIFT,
+	TCA_FLOW_ADDEND,
+	TCA_FLOW_MASK,
+	TCA_FLOW_XOR,
+	TCA_FLOW_DIVISOR,
+	TCA_FLOW_ACT,
+	TCA_FLOW_POLICE,
+	TCA_FLOW_EMATCHES,
+	TCA_FLOW_PERTURB,
+	__TCA_FLOW_MAX
+};
+
+#define TCA_FLOW_MAX	(__TCA_FLOW_MAX - 1)
+
+/* Basic filter */
+
+enum {
+	TCA_BASIC_UNSPEC,
+	TCA_BASIC_CLASSID,
+	TCA_BASIC_EMATCHES,
+	TCA_BASIC_ACT,
+	TCA_BASIC_POLICE,
+	__TCA_BASIC_MAX
+};
+
+#define TCA_BASIC_MAX (__TCA_BASIC_MAX - 1)
+
+
+/* Cgroup classifier */
+
+enum {
+	TCA_CGROUP_UNSPEC,
+	TCA_CGROUP_ACT,
+	TCA_CGROUP_POLICE,
+	TCA_CGROUP_EMATCHES,
+	__TCA_CGROUP_MAX,
+};
+
+#define TCA_CGROUP_MAX (__TCA_CGROUP_MAX - 1)
+
+/* Extended Matches */
+
+struct tcf_ematch_tree_hdr {
+	__u16		nmatches;
+	__u16		progid;
+};
+
+enum {
+	TCA_EMATCH_TREE_UNSPEC,
+	TCA_EMATCH_TREE_HDR,
+	TCA_EMATCH_TREE_LIST,
+	__TCA_EMATCH_TREE_MAX
+};
+#define TCA_EMATCH_TREE_MAX (__TCA_EMATCH_TREE_MAX - 1)
+
+struct tcf_ematch_hdr {
+	__u16		matchid;
+	__u16		kind;
+	__u16		flags;
+	__u16		pad; /* currently unused */
+};
+
+/*  0                   1
+ *  0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 
+ * +-----------------------+-+-+---+
+ * |         Unused        |S|I| R |
+ * +-----------------------+-+-+---+
+ *
+ * R(2) ::= relation to next ematch
+ *          where: 0 0 END (last ematch)
+ *                 0 1 AND
+ *                 1 0 OR
+ *                 1 1 Unused (invalid)
+ * I(1) ::= invert result
+ * S(1) ::= simple payload
+ */
+#define TCF_EM_REL_END	0
+#define TCF_EM_REL_AND	(1<<0)
+#define TCF_EM_REL_OR	(1<<1)
+#define TCF_EM_INVERT	(1<<2)
+#define TCF_EM_SIMPLE	(1<<3)
+
+#define TCF_EM_REL_MASK	3
+#define TCF_EM_REL_VALID(v) (((v) & TCF_EM_REL_MASK) != TCF_EM_REL_MASK)
+
+enum {
+	TCF_LAYER_LINK,
+	TCF_LAYER_NETWORK,
+	TCF_LAYER_TRANSPORT,
+	__TCF_LAYER_MAX
+};
+#define TCF_LAYER_MAX (__TCF_LAYER_MAX - 1)
+
+/* Ematch type assignments
+ *   1..32767		Reserved for ematches inside kernel tree
+ *   32768..65535	Free to use, not reliable
+ */
+#define	TCF_EM_CONTAINER	0
+#define	TCF_EM_CMP		1
+#define	TCF_EM_NBYTE		2
+#define	TCF_EM_U32		3
+#define	TCF_EM_META		4
+#define	TCF_EM_TEXT		5
+#define        TCF_EM_VLAN		6
+#define	TCF_EM_MAX		6
+
+enum {
+	TCF_EM_PROG_TC
+};
+
+enum {
+	TCF_EM_OPND_EQ,
+	TCF_EM_OPND_GT,
+	TCF_EM_OPND_LT
+};
+
+#endif
diff --git a/include/linux/pkt_sched.h b/include/linux/pkt_sched.h
new file mode 100644
index 00000000..410b33d0
--- /dev/null
+++ b/include/linux/pkt_sched.h
@@ -0,0 +1,657 @@
+#ifndef __LINUX_PKT_SCHED_H
+#define __LINUX_PKT_SCHED_H
+
+#include <linux/types.h>
+
+/* Logical priority bands not depending on specific packet scheduler.
+   Every scheduler will map them to real traffic classes, if it has
+   no more precise mechanism to classify packets.
+
+   These numbers have no special meaning, though their coincidence
+   with obsolete IPv6 values is not occasional :-). New IPv6 drafts
+   preferred full anarchy inspired by diffserv group.
+
+   Note: TC_PRIO_BESTEFFORT does not mean that it is the most unhappy
+   class, actually, as rule it will be handled with more care than
+   filler or even bulk.
+ */
+
+#define TC_PRIO_BESTEFFORT		0
+#define TC_PRIO_FILLER			1
+#define TC_PRIO_BULK			2
+#define TC_PRIO_INTERACTIVE_BULK	4
+#define TC_PRIO_INTERACTIVE		6
+#define TC_PRIO_CONTROL			7
+
+#define TC_PRIO_MAX			15
+
+/* Generic queue statistics, available for all the elements.
+   Particular schedulers may have also their private records.
+ */
+
+struct tc_stats {
+	__u64	bytes;			/* Number of enqueued bytes */
+	__u32	packets;		/* Number of enqueued packets	*/
+	__u32	drops;			/* Packets dropped because of lack of resources */
+	__u32	overlimits;		/* Number of throttle events when this
+					 * flow goes out of allocated bandwidth */
+	__u32	bps;			/* Current flow byte rate */
+	__u32	pps;			/* Current flow packet rate */
+	__u32	qlen;
+	__u32	backlog;
+};
+
+struct tc_estimator {
+	signed char	interval;
+	unsigned char	ewma_log;
+};
+
+/* "Handles"
+   ---------
+
+    All the traffic control objects have 32bit identifiers, or "handles".
+
+    They can be considered as opaque numbers from user API viewpoint,
+    but actually they always consist of two fields: major and
+    minor numbers, which are interpreted by kernel specially,
+    that may be used by applications, though not recommended.
+
+    F.e. qdisc handles always have minor number equal to zero,
+    classes (or flows) have major equal to parent qdisc major, and
+    minor uniquely identifying class inside qdisc.
+
+    Macros to manipulate handles:
+ */
+
+#define TC_H_MAJ_MASK (0xFFFF0000U)
+#define TC_H_MIN_MASK (0x0000FFFFU)
+#define TC_H_MAJ(h) ((h)&TC_H_MAJ_MASK)
+#define TC_H_MIN(h) ((h)&TC_H_MIN_MASK)
+#define TC_H_MAKE(maj,min) (((maj)&TC_H_MAJ_MASK)|((min)&TC_H_MIN_MASK))
+
+#define TC_H_UNSPEC	(0U)
+#define TC_H_ROOT	(0xFFFFFFFFU)
+#define TC_H_INGRESS    (0xFFFFFFF1U)
+
+struct tc_ratespec {
+	unsigned char	cell_log;
+	unsigned char	__reserved;
+	unsigned short	overhead;
+	short		cell_align;
+	unsigned short	mpu;
+	__u32		rate;
+};
+
+#define TC_RTAB_SIZE	1024
+
+struct tc_sizespec {
+	unsigned char	cell_log;
+	unsigned char	size_log;
+	short		cell_align;
+	int		overhead;
+	unsigned int	linklayer;
+	unsigned int	mpu;
+	unsigned int	mtu;
+	unsigned int	tsize;
+};
+
+enum {
+	TCA_STAB_UNSPEC,
+	TCA_STAB_BASE,
+	TCA_STAB_DATA,
+	__TCA_STAB_MAX
+};
+
+#define TCA_STAB_MAX (__TCA_STAB_MAX - 1)
+
+/* FIFO section */
+
+struct tc_fifo_qopt {
+	__u32	limit;	/* Queue length: bytes for bfifo, packets for pfifo */
+};
+
+/* PRIO section */
+
+#define TCQ_PRIO_BANDS	16
+#define TCQ_MIN_PRIO_BANDS 2
+
+struct tc_prio_qopt {
+	int	bands;			/* Number of bands */
+	__u8	priomap[TC_PRIO_MAX+1];	/* Map: logical priority -> PRIO band */
+};
+
+/* MULTIQ section */
+
+struct tc_multiq_qopt {
+	__u16	bands;			/* Number of bands */
+	__u16	max_bands;		/* Maximum number of queues */
+};
+
+/* PLUG section */
+
+#define TCQ_PLUG_BUFFER                0
+#define TCQ_PLUG_RELEASE_ONE           1
+#define TCQ_PLUG_RELEASE_INDEFINITE    2
+#define TCQ_PLUG_LIMIT                 3
+
+struct tc_plug_qopt {
+	/* TCQ_PLUG_BUFFER: Inset a plug into the queue and
+	 *  buffer any incoming packets
+	 * TCQ_PLUG_RELEASE_ONE: Dequeue packets from queue head
+	 *   to beginning of the next plug.
+	 * TCQ_PLUG_RELEASE_INDEFINITE: Dequeue all packets from queue.
+	 *   Stop buffering packets until the next TCQ_PLUG_BUFFER
+	 *   command is received (just act as a pass-thru queue).
+	 * TCQ_PLUG_LIMIT: Increase/decrease queue size
+	 */
+	int             action;
+	__u32           limit;
+};
+
+/* TBF section */
+
+struct tc_tbf_qopt {
+	struct tc_ratespec rate;
+	struct tc_ratespec peakrate;
+	__u32		limit;
+	__u32		buffer;
+	__u32		mtu;
+};
+
+enum {
+	TCA_TBF_UNSPEC,
+	TCA_TBF_PARMS,
+	TCA_TBF_RTAB,
+	TCA_TBF_PTAB,
+	__TCA_TBF_MAX,
+};
+
+#define TCA_TBF_MAX (__TCA_TBF_MAX - 1)
+
+
+/* TEQL section */
+
+/* TEQL does not require any parameters */
+
+/* SFQ section */
+
+struct tc_sfq_qopt {
+	unsigned	quantum;	/* Bytes per round allocated to flow */
+	int		perturb_period;	/* Period of hash perturbation */
+	__u32		limit;		/* Maximal packets in queue */
+	unsigned	divisor;	/* Hash divisor  */
+	unsigned	flows;		/* Maximal number of flows  */
+};
+
+struct tc_sfqred_stats {
+	__u32           prob_drop;      /* Early drops, below max threshold */
+	__u32           forced_drop;	/* Early drops, after max threshold */
+	__u32           prob_mark;      /* Marked packets, below max threshold */
+	__u32           forced_mark;    /* Marked packets, after max threshold */
+	__u32           prob_mark_head; /* Marked packets, below max threshold */
+	__u32           forced_mark_head;/* Marked packets, after max threshold */
+};
+
+struct tc_sfq_qopt_v1 {
+	struct tc_sfq_qopt v0;
+	unsigned int	depth;		/* max number of packets per flow */
+	unsigned int	headdrop;
+/* SFQRED parameters */
+	__u32		limit;		/* HARD maximal flow queue length (bytes) */
+	__u32		qth_min;	/* Min average length threshold (bytes) */
+	__u32		qth_max;	/* Max average length threshold (bytes) */
+	unsigned char   Wlog;		/* log(W)		*/
+	unsigned char   Plog;		/* log(P_max/(qth_max-qth_min))	*/
+	unsigned char   Scell_log;	/* cell size for idle damping */
+	unsigned char	flags;
+	__u32		max_P;		/* probability, high resolution */
+/* SFQRED stats */
+	struct tc_sfqred_stats stats;
+};
+
+
+struct tc_sfq_xstats {
+	__s32		allot;
+};
+
+/* RED section */
+
+enum {
+	TCA_RED_UNSPEC,
+	TCA_RED_PARMS,
+	TCA_RED_STAB,
+	TCA_RED_MAX_P,
+	__TCA_RED_MAX,
+};
+
+#define TCA_RED_MAX (__TCA_RED_MAX - 1)
+
+struct tc_red_qopt {
+	__u32		limit;		/* HARD maximal queue length (bytes)	*/
+	__u32		qth_min;	/* Min average length threshold (bytes) */
+	__u32		qth_max;	/* Max average length threshold (bytes) */
+	unsigned char   Wlog;		/* log(W)		*/
+	unsigned char   Plog;		/* log(P_max/(qth_max-qth_min))	*/
+	unsigned char   Scell_log;	/* cell size for idle damping */
+	unsigned char	flags;
+#define TC_RED_ECN		1
+#define TC_RED_HARDDROP		2
+#define TC_RED_ADAPTATIVE	4
+};
+
+struct tc_red_xstats {
+	__u32           early;          /* Early drops */
+	__u32           pdrop;          /* Drops due to queue limits */
+	__u32           other;          /* Drops due to drop() calls */
+	__u32           marked;         /* Marked packets */
+};
+
+/* GRED section */
+
+#define MAX_DPs 16
+
+enum {
+       TCA_GRED_UNSPEC,
+       TCA_GRED_PARMS,
+       TCA_GRED_STAB,
+       TCA_GRED_DPS,
+       TCA_GRED_MAX_P,
+	   __TCA_GRED_MAX,
+};
+
+#define TCA_GRED_MAX (__TCA_GRED_MAX - 1)
+
+struct tc_gred_qopt {
+	__u32		limit;        /* HARD maximal queue length (bytes)    */
+	__u32		qth_min;      /* Min average length threshold (bytes) */
+	__u32		qth_max;      /* Max average length threshold (bytes) */
+	__u32		DP;           /* up to 2^32 DPs */
+	__u32		backlog;
+	__u32		qave;
+	__u32		forced;
+	__u32		early;
+	__u32		other;
+	__u32		pdrop;
+	__u8		Wlog;         /* log(W)               */
+	__u8		Plog;         /* log(P_max/(qth_max-qth_min)) */
+	__u8		Scell_log;    /* cell size for idle damping */
+	__u8		prio;         /* prio of this VQ */
+	__u32		packets;
+	__u32		bytesin;
+};
+
+/* gred setup */
+struct tc_gred_sopt {
+	__u32		DPs;
+	__u32		def_DP;
+	__u8		grio;
+	__u8		flags;
+	__u16		pad1;
+};
+
+/* CHOKe section */
+
+enum {
+	TCA_CHOKE_UNSPEC,
+	TCA_CHOKE_PARMS,
+	TCA_CHOKE_STAB,
+	TCA_CHOKE_MAX_P,
+	__TCA_CHOKE_MAX,
+};
+
+#define TCA_CHOKE_MAX (__TCA_CHOKE_MAX - 1)
+
+struct tc_choke_qopt {
+	__u32		limit;		/* Hard queue length (packets)	*/
+	__u32		qth_min;	/* Min average threshold (packets) */
+	__u32		qth_max;	/* Max average threshold (packets) */
+	unsigned char   Wlog;		/* log(W)		*/
+	unsigned char   Plog;		/* log(P_max/(qth_max-qth_min))	*/
+	unsigned char   Scell_log;	/* cell size for idle damping */
+	unsigned char	flags;		/* see RED flags */
+};
+
+struct tc_choke_xstats {
+	__u32		early;          /* Early drops */
+	__u32		pdrop;          /* Drops due to queue limits */
+	__u32		other;          /* Drops due to drop() calls */
+	__u32		marked;         /* Marked packets */
+	__u32		matched;	/* Drops due to flow match */
+};
+
+/* HTB section */
+#define TC_HTB_NUMPRIO		8
+#define TC_HTB_MAXDEPTH		8
+#define TC_HTB_PROTOVER		3 /* the same as HTB and TC's major */
+
+struct tc_htb_opt {
+	struct tc_ratespec 	rate;
+	struct tc_ratespec 	ceil;
+	__u32	buffer;
+	__u32	cbuffer;
+	__u32	quantum;
+	__u32	level;		/* out only */
+	__u32	prio;
+};
+struct tc_htb_glob {
+	__u32 version;		/* to match HTB/TC */
+    	__u32 rate2quantum;	/* bps->quantum divisor */
+    	__u32 defcls;		/* default class number */
+	__u32 debug;		/* debug flags */
+
+	/* stats */
+	__u32 direct_pkts; /* count of non shaped packets */
+};
+enum {
+	TCA_HTB_UNSPEC,
+	TCA_HTB_PARMS,
+	TCA_HTB_INIT,
+	TCA_HTB_CTAB,
+	TCA_HTB_RTAB,
+	__TCA_HTB_MAX,
+};
+
+#define TCA_HTB_MAX (__TCA_HTB_MAX - 1)
+
+struct tc_htb_xstats {
+	__u32 lends;
+	__u32 borrows;
+	__u32 giants;	/* too big packets (rate will not be accurate) */
+	__u32 tokens;
+	__u32 ctokens;
+};
+
+/* HFSC section */
+
+struct tc_hfsc_qopt {
+	__u16	defcls;		/* default class */
+};
+
+struct tc_service_curve {
+	__u32	m1;		/* slope of the first segment in bps */
+	__u32	d;		/* x-projection of the first segment in us */
+	__u32	m2;		/* slope of the second segment in bps */
+};
+
+struct tc_hfsc_stats {
+	__u64	work;		/* total work done */
+	__u64	rtwork;		/* work done by real-time criteria */
+	__u32	period;		/* current period */
+	__u32	level;		/* class level in hierarchy */
+};
+
+enum {
+	TCA_HFSC_UNSPEC,
+	TCA_HFSC_RSC,
+	TCA_HFSC_FSC,
+	TCA_HFSC_USC,
+	__TCA_HFSC_MAX,
+};
+
+#define TCA_HFSC_MAX (__TCA_HFSC_MAX - 1)
+
+
+/* CBQ section */
+
+#define TC_CBQ_MAXPRIO		8
+#define TC_CBQ_MAXLEVEL		8
+#define TC_CBQ_DEF_EWMA		5
+
+struct tc_cbq_lssopt {
+	unsigned char	change;
+	unsigned char	flags;
+#define TCF_CBQ_LSS_BOUNDED	1
+#define TCF_CBQ_LSS_ISOLATED	2
+	unsigned char  	ewma_log;
+	unsigned char  	level;
+#define TCF_CBQ_LSS_FLAGS	1
+#define TCF_CBQ_LSS_EWMA	2
+#define TCF_CBQ_LSS_MAXIDLE	4
+#define TCF_CBQ_LSS_MINIDLE	8
+#define TCF_CBQ_LSS_OFFTIME	0x10
+#define TCF_CBQ_LSS_AVPKT	0x20
+	__u32		maxidle;
+	__u32		minidle;
+	__u32		offtime;
+	__u32		avpkt;
+};
+
+struct tc_cbq_wrropt {
+	unsigned char	flags;
+	unsigned char	priority;
+	unsigned char	cpriority;
+	unsigned char	__reserved;
+	__u32		allot;
+	__u32		weight;
+};
+
+struct tc_cbq_ovl {
+	unsigned char	strategy;
+#define	TC_CBQ_OVL_CLASSIC	0
+#define	TC_CBQ_OVL_DELAY	1
+#define	TC_CBQ_OVL_LOWPRIO	2
+#define	TC_CBQ_OVL_DROP		3
+#define	TC_CBQ_OVL_RCLASSIC	4
+	unsigned char	priority2;
+	__u16		pad;
+	__u32		penalty;
+};
+
+struct tc_cbq_police {
+	unsigned char	police;
+	unsigned char	__res1;
+	unsigned short	__res2;
+};
+
+struct tc_cbq_fopt {
+	__u32		split;
+	__u32		defmap;
+	__u32		defchange;
+};
+
+struct tc_cbq_xstats {
+	__u32		borrows;
+	__u32		overactions;
+	__s32		avgidle;
+	__s32		undertime;
+};
+
+enum {
+	TCA_CBQ_UNSPEC,
+	TCA_CBQ_LSSOPT,
+	TCA_CBQ_WRROPT,
+	TCA_CBQ_FOPT,
+	TCA_CBQ_OVL_STRATEGY,
+	TCA_CBQ_RATE,
+	TCA_CBQ_RTAB,
+	TCA_CBQ_POLICE,
+	__TCA_CBQ_MAX,
+};
+
+#define TCA_CBQ_MAX	(__TCA_CBQ_MAX - 1)
+
+/* dsmark section */
+
+enum {
+	TCA_DSMARK_UNSPEC,
+	TCA_DSMARK_INDICES,
+	TCA_DSMARK_DEFAULT_INDEX,
+	TCA_DSMARK_SET_TC_INDEX,
+	TCA_DSMARK_MASK,
+	TCA_DSMARK_VALUE,
+	__TCA_DSMARK_MAX,
+};
+
+#define TCA_DSMARK_MAX (__TCA_DSMARK_MAX - 1)
+
+/* ATM  section */
+
+enum {
+	TCA_ATM_UNSPEC,
+	TCA_ATM_FD,		/* file/socket descriptor */
+	TCA_ATM_PTR,		/* pointer to descriptor - later */
+	TCA_ATM_HDR,		/* LL header */
+	TCA_ATM_EXCESS,		/* excess traffic class (0 for CLP)  */
+	TCA_ATM_ADDR,		/* PVC address (for output only) */
+	TCA_ATM_STATE,		/* VC state (ATM_VS_*; for output only) */
+	__TCA_ATM_MAX,
+};
+
+#define TCA_ATM_MAX	(__TCA_ATM_MAX - 1)
+
+/* Network emulator */
+
+enum {
+	TCA_NETEM_UNSPEC,
+	TCA_NETEM_CORR,
+	TCA_NETEM_DELAY_DIST,
+	TCA_NETEM_REORDER,
+	TCA_NETEM_CORRUPT,
+	TCA_NETEM_LOSS,
+	TCA_NETEM_RATE,
+	__TCA_NETEM_MAX,
+};
+
+#define TCA_NETEM_MAX (__TCA_NETEM_MAX - 1)
+
+struct tc_netem_qopt {
+	__u32	latency;	/* added delay (us) */
+	__u32   limit;		/* fifo limit (packets) */
+	__u32	loss;		/* random packet loss (0=none ~0=100%) */
+	__u32	gap;		/* re-ordering gap (0 for none) */
+	__u32   duplicate;	/* random packet dup  (0=none ~0=100%) */
+	__u32	jitter;		/* random jitter in latency (us) */
+};
+
+struct tc_netem_corr {
+	__u32	delay_corr;	/* delay correlation */
+	__u32	loss_corr;	/* packet loss correlation */
+	__u32	dup_corr;	/* duplicate correlation  */
+};
+
+struct tc_netem_reorder {
+	__u32	probability;
+	__u32	correlation;
+};
+
+struct tc_netem_corrupt {
+	__u32	probability;
+	__u32	correlation;
+};
+
+struct tc_netem_rate {
+	__u32	rate;	/* byte/s */
+	__s32	packet_overhead;
+	__u32	cell_size;
+	__s32	cell_overhead;
+};
+
+enum {
+	NETEM_LOSS_UNSPEC,
+	NETEM_LOSS_GI,		/* General Intuitive - 4 state model */
+	NETEM_LOSS_GE,		/* Gilbert Elliot models */
+	__NETEM_LOSS_MAX
+};
+#define NETEM_LOSS_MAX (__NETEM_LOSS_MAX - 1)
+
+/* State transition probabilities for 4 state model */
+struct tc_netem_gimodel {
+	__u32	p13;
+	__u32	p31;
+	__u32	p32;
+	__u32	p14;
+	__u32	p23;
+};
+
+/* Gilbert-Elliot models */
+struct tc_netem_gemodel {
+	__u32 p;
+	__u32 r;
+	__u32 h;
+	__u32 k1;
+};
+
+#define NETEM_DIST_SCALE	8192
+#define NETEM_DIST_MAX		16384
+
+/* DRR */
+
+enum {
+	TCA_DRR_UNSPEC,
+	TCA_DRR_QUANTUM,
+	__TCA_DRR_MAX
+};
+
+#define TCA_DRR_MAX	(__TCA_DRR_MAX - 1)
+
+struct tc_drr_stats {
+	__u32	deficit;
+};
+
+/* MQPRIO */
+#define TC_QOPT_BITMASK 15
+#define TC_QOPT_MAX_QUEUE 16
+
+struct tc_mqprio_qopt {
+	__u8	num_tc;
+	__u8	prio_tc_map[TC_QOPT_BITMASK + 1];
+	__u8	hw;
+	__u16	count[TC_QOPT_MAX_QUEUE];
+	__u16	offset[TC_QOPT_MAX_QUEUE];
+};
+
+/* SFB */
+
+enum {
+	TCA_SFB_UNSPEC,
+	TCA_SFB_PARMS,
+	__TCA_SFB_MAX,
+};
+
+#define TCA_SFB_MAX (__TCA_SFB_MAX - 1)
+
+/*
+ * Note: increment, decrement are Q0.16 fixed-point values.
+ */
+struct tc_sfb_qopt {
+	__u32 rehash_interval;	/* delay between hash move, in ms */
+	__u32 warmup_time;	/* double buffering warmup time in ms (warmup_time < rehash_interval) */
+	__u32 max;		/* max len of qlen_min */
+	__u32 bin_size;		/* maximum queue length per bin */
+	__u32 increment;	/* probability increment, (d1 in Blue) */
+	__u32 decrement;	/* probability decrement, (d2 in Blue) */
+	__u32 limit;		/* max SFB queue length */
+	__u32 penalty_rate;	/* inelastic flows are rate limited to 'rate' pps */
+	__u32 penalty_burst;
+};
+
+struct tc_sfb_xstats {
+	__u32 earlydrop;
+	__u32 penaltydrop;
+	__u32 bucketdrop;
+	__u32 queuedrop;
+	__u32 childdrop; /* drops in child qdisc */
+	__u32 marked;
+	__u32 maxqlen;
+	__u32 maxprob;
+	__u32 avgprob;
+};
+
+#define SFB_MAX_PROB 0xFFFF
+
+/* QFQ */
+enum {
+	TCA_QFQ_UNSPEC,
+	TCA_QFQ_WEIGHT,
+	TCA_QFQ_LMAX,
+	__TCA_QFQ_MAX
+};
+
+#define TCA_QFQ_MAX	(__TCA_QFQ_MAX - 1)
+
+struct tc_qfq_stats {
+	__u32 weight;
+	__u32 lmax;
+};
+
+#endif
diff --git a/include/linux/pktcdvd.h b/include/linux/pktcdvd.h
new file mode 100644
index 00000000..721301b0
--- /dev/null
+++ b/include/linux/pktcdvd.h
@@ -0,0 +1,302 @@
+/*
+ * Copyright (C) 2000 Jens Axboe <axboe@suse.de>
+ * Copyright (C) 2001-2004 Peter Osterlund <petero2@telia.com>
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Packet writing layer for ATAPI and SCSI CD-R, CD-RW, DVD-R, and
+ * DVD-RW devices.
+ *
+ */
+#ifndef __PKTCDVD_H
+#define __PKTCDVD_H
+
+#include <linux/types.h>
+
+/*
+ * 1 for normal debug messages, 2 is very verbose. 0 to turn it off.
+ */
+#define PACKET_DEBUG		1
+
+#define	MAX_WRITERS		8
+
+#define PKT_RB_POOL_SIZE	512
+
+/*
+ * How long we should hold a non-full packet before starting data gathering.
+ */
+#define PACKET_WAIT_TIME	(HZ * 5 / 1000)
+
+/*
+ * use drive write caching -- we need deferred error handling to be
+ * able to successfully recover with this option (drive will return good
+ * status as soon as the cdb is validated).
+ */
+#if defined(CONFIG_CDROM_PKTCDVD_WCACHE)
+#define USE_WCACHING		1
+#else
+#define USE_WCACHING		0
+#endif
+
+/*
+ * No user-servicable parts beyond this point ->
+ */
+
+/*
+ * device types
+ */
+#define PACKET_CDR		1
+#define	PACKET_CDRW		2
+#define PACKET_DVDR		3
+#define PACKET_DVDRW		4
+
+/*
+ * flags
+ */
+#define PACKET_WRITABLE		1	/* pd is writable */
+#define PACKET_NWA_VALID	2	/* next writable address valid */
+#define PACKET_LRA_VALID	3	/* last recorded address valid */
+#define PACKET_MERGE_SEGS	4	/* perform segment merging to keep */
+					/* underlying cdrom device happy */
+
+/*
+ * Disc status -- from READ_DISC_INFO
+ */
+#define PACKET_DISC_EMPTY	0
+#define PACKET_DISC_INCOMPLETE	1
+#define PACKET_DISC_COMPLETE	2
+#define PACKET_DISC_OTHER	3
+
+/*
+ * write type, and corresponding data block type
+ */
+#define PACKET_MODE1		1
+#define PACKET_MODE2		2
+#define PACKET_BLOCK_MODE1	8
+#define PACKET_BLOCK_MODE2	10
+
+/*
+ * Last session/border status
+ */
+#define PACKET_SESSION_EMPTY		0
+#define PACKET_SESSION_INCOMPLETE	1
+#define PACKET_SESSION_RESERVED		2
+#define PACKET_SESSION_COMPLETE		3
+
+#define PACKET_MCN			"4a656e734178626f65323030300000"
+
+#undef PACKET_USE_LS
+
+#define PKT_CTRL_CMD_SETUP	0
+#define PKT_CTRL_CMD_TEARDOWN	1
+#define PKT_CTRL_CMD_STATUS	2
+
+struct pkt_ctrl_command {
+	__u32 command;				/* in: Setup, teardown, status */
+	__u32 dev_index;			/* in/out: Device index */
+	__u32 dev;				/* in/out: Device nr for cdrw device */
+	__u32 pkt_dev;				/* in/out: Device nr for packet device */
+	__u32 num_devices;			/* out: Largest device index + 1 */
+	__u32 padding;				/* Not used */
+};
+
+/*
+ * packet ioctls
+ */
+#define PACKET_IOCTL_MAGIC	('X')
+#define PACKET_CTRL_CMD		_IOWR(PACKET_IOCTL_MAGIC, 1, struct pkt_ctrl_command)
+
+#ifdef __KERNEL__
+#include <linux/blkdev.h>
+#include <linux/completion.h>
+#include <linux/cdrom.h>
+#include <linux/kobject.h>
+#include <linux/sysfs.h>
+#include <linux/mempool.h>
+
+/* default bio write queue congestion marks */
+#define PKT_WRITE_CONGESTION_ON    10000
+#define PKT_WRITE_CONGESTION_OFF   9000
+
+
+struct packet_settings
+{
+	__u32			size;		/* packet size in (512 byte) sectors */
+	__u8			fp;		/* fixed packets */
+	__u8			link_loss;	/* the rest is specified
+						 * as per Mt Fuji */
+	__u8			write_type;
+	__u8			track_mode;
+	__u8			block_mode;
+};
+
+/*
+ * Very crude stats for now
+ */
+struct packet_stats
+{
+	unsigned long		pkt_started;
+	unsigned long		pkt_ended;
+	unsigned long		secs_w;
+	unsigned long		secs_rg;
+	unsigned long		secs_r;
+};
+
+struct packet_cdrw
+{
+	struct list_head	pkt_free_list;
+	struct list_head	pkt_active_list;
+	spinlock_t		active_list_lock; /* Serialize access to pkt_active_list */
+	struct task_struct	*thread;
+	atomic_t		pending_bios;
+};
+
+/*
+ * Switch to high speed reading after reading this many kilobytes
+ * with no interspersed writes.
+ */
+#define HI_SPEED_SWITCH 512
+
+struct packet_iosched
+{
+	atomic_t		attention;	/* Set to non-zero when queue processing is needed */
+	int			writing;	/* Non-zero when writing, zero when reading */
+	spinlock_t		lock;		/* Protecting read/write queue manipulations */
+	struct bio_list		read_queue;
+	struct bio_list		write_queue;
+	sector_t		last_write;	/* The sector where the last write ended */
+	int			successive_reads;
+};
+
+/*
+ * 32 buffers of 2048 bytes
+ */
+#if (PAGE_SIZE % CD_FRAMESIZE) != 0
+#error "PAGE_SIZE must be a multiple of CD_FRAMESIZE"
+#endif
+#define PACKET_MAX_SIZE		128
+#define FRAMES_PER_PAGE		(PAGE_SIZE / CD_FRAMESIZE)
+#define PACKET_MAX_SECTORS	(PACKET_MAX_SIZE * CD_FRAMESIZE >> 9)
+
+enum packet_data_state {
+	PACKET_IDLE_STATE,			/* Not used at the moment */
+	PACKET_WAITING_STATE,			/* Waiting for more bios to arrive, so */
+						/* we don't have to do as much */
+						/* data gathering */
+	PACKET_READ_WAIT_STATE,			/* Waiting for reads to fill in holes */
+	PACKET_WRITE_WAIT_STATE,		/* Waiting for the write to complete */
+	PACKET_RECOVERY_STATE,			/* Recover after read/write errors */
+	PACKET_FINISHED_STATE,			/* After write has finished */
+
+	PACKET_NUM_STATES			/* Number of possible states */
+};
+
+/*
+ * Information needed for writing a single packet
+ */
+struct pktcdvd_device;
+
+struct packet_data
+{
+	struct list_head	list;
+
+	spinlock_t		lock;		/* Lock protecting state transitions and */
+						/* orig_bios list */
+
+	struct bio_list		orig_bios;	/* Original bios passed to pkt_make_request */
+						/* that will be handled by this packet */
+	int			write_size;	/* Total size of all bios in the orig_bios */
+						/* list, measured in number of frames */
+
+	struct bio		*w_bio;		/* The bio we will send to the real CD */
+						/* device once we have all data for the */
+						/* packet we are going to write */
+	sector_t		sector;		/* First sector in this packet */
+	int			frames;		/* Number of frames in this packet */
+
+	enum packet_data_state	state;		/* Current state */
+	atomic_t		run_sm;		/* Incremented whenever the state */
+						/* machine needs to be run */
+	long			sleep_time;	/* Set this to non-zero to make the state */
+						/* machine run after this many jiffies. */
+
+	atomic_t		io_wait;	/* Number of pending IO operations */
+	atomic_t		io_errors;	/* Number of read/write errors during IO */
+
+	struct bio		*r_bios[PACKET_MAX_SIZE]; /* bios to use during data gathering */
+	struct page		*pages[PACKET_MAX_SIZE / FRAMES_PER_PAGE];
+
+	int			cache_valid;	/* If non-zero, the data for the zone defined */
+						/* by the sector variable is completely cached */
+						/* in the pages[] vector. */
+
+	int			id;		/* ID number for debugging */
+	struct pktcdvd_device	*pd;
+};
+
+struct pkt_rb_node {
+	struct rb_node		rb_node;
+	struct bio		*bio;
+};
+
+struct packet_stacked_data
+{
+	struct bio		*bio;		/* Original read request bio */
+	struct pktcdvd_device	*pd;
+};
+#define PSD_POOL_SIZE		64
+
+struct pktcdvd_kobj
+{
+	struct kobject		kobj;
+	struct pktcdvd_device	*pd;
+};
+#define to_pktcdvdkobj(_k) \
+  ((struct pktcdvd_kobj*)container_of(_k,struct pktcdvd_kobj,kobj))
+
+struct pktcdvd_device
+{
+	struct block_device	*bdev;		/* dev attached */
+	dev_t			pkt_dev;	/* our dev */
+	char			name[20];
+	struct packet_settings	settings;
+	struct packet_stats	stats;
+	int			refcnt;		/* Open count */
+	int			write_speed;	/* current write speed, kB/s */
+	int			read_speed;	/* current read speed, kB/s */
+	unsigned long		offset;		/* start offset */
+	__u8			mode_offset;	/* 0 / 8 */
+	__u8			type;
+	unsigned long		flags;
+	__u16			mmc3_profile;
+	__u32			nwa;		/* next writable address */
+	__u32			lra;		/* last recorded address */
+	struct packet_cdrw	cdrw;
+	wait_queue_head_t	wqueue;
+
+	spinlock_t		lock;		/* Serialize access to bio_queue */
+	struct rb_root		bio_queue;	/* Work queue of bios we need to handle */
+	int			bio_queue_size;	/* Number of nodes in bio_queue */
+	sector_t		current_sector;	/* Keep track of where the elevator is */
+	atomic_t		scan_queue;	/* Set to non-zero when pkt_handle_queue */
+						/* needs to be run. */
+	mempool_t		*rb_pool;	/* mempool for pkt_rb_node allocations */
+
+	struct packet_iosched   iosched;
+	struct gendisk		*disk;
+
+	int			write_congestion_off;
+	int			write_congestion_on;
+
+	struct device		*dev;		/* sysfs pktcdvd[0-7] dev */
+	struct pktcdvd_kobj	*kobj_stat;	/* sysfs pktcdvd[0-7]/stat/     */
+	struct pktcdvd_kobj	*kobj_wqueue;	/* sysfs pktcdvd[0-7]/write_queue/ */
+
+	struct dentry		*dfs_d_root;	/* debugfs: devname directory */
+	struct dentry		*dfs_f_info;	/* debugfs: info file */
+};
+
+#endif /* __KERNEL__ */
+
+#endif /* __PKTCDVD_H */
diff --git a/include/linux/platform_data/android_battery.h b/include/linux/platform_data/android_battery.h
new file mode 100644
index 00000000..f6c8298f
--- /dev/null
+++ b/include/linux/platform_data/android_battery.h
@@ -0,0 +1,47 @@
+/*
+ *  android_battery.h
+ *
+ *  Copyright (C) 2012 Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _LINUX_ANDROID_BATTERY_H
+#define _LINUX_ANDROID_BATTERY_H
+
+enum {
+	CHARGE_SOURCE_NONE = 0,
+	CHARGE_SOURCE_AC,
+	CHARGE_SOURCE_USB,
+};
+
+struct android_bat_callbacks {
+	void (*charge_source_changed)
+		(struct android_bat_callbacks *, int);
+	void (*battery_set_full)(struct android_bat_callbacks *);
+};
+
+struct android_bat_platform_data {
+	void (*register_callbacks)(struct android_bat_callbacks *);
+	void (*unregister_callbacks)(void);
+	void (*set_charging_current) (int);
+	void (*set_charging_enable) (int);
+	int (*poll_charge_source) (void);
+	int (*get_capacity) (void);
+	int (*get_temperature) (int *);
+	int (*get_voltage_now)(void);
+	int (*get_current_now)(int *);
+
+	int temp_high_threshold;
+	int temp_high_recovery;
+	int temp_low_recovery;
+	int temp_low_threshold;
+
+	unsigned long full_charging_time;
+	unsigned long recharging_time;
+	unsigned int recharging_voltage;
+};
+
+#endif
diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h
new file mode 100644
index 00000000..b0f2c56a
--- /dev/null
+++ b/include/linux/platform_data/atmel.h
@@ -0,0 +1,27 @@
+/*
+ * atmel platform data
+ *
+ * GPL v2 Only
+ */
+
+#ifndef __ATMEL_H__
+#define __ATMEL_H__
+
+#include <linux/mtd/nand.h>
+
+ /* NAND / SmartMedia */
+struct atmel_nand_data {
+	int		enable_pin;		/* chip enable */
+	int		det_pin;		/* card detect */
+	int		rdy_pin;		/* ready/busy */
+	u8		rdy_pin_active_low;	/* rdy_pin value is inverted */
+	u8		ale;			/* address line number connected to ALE */
+	u8		cle;			/* address line number connected to CLE */
+	u8		bus_width_16;		/* buswidth is 16 bit */
+	u8		ecc_mode;		/* ecc mode */
+	u8		on_flash_bbt;		/* bbt on flash */
+	struct mtd_partition *parts;
+	unsigned int	num_parts;
+};
+
+#endif /* __ATMEL_H__ */
diff --git a/include/linux/platform_data/cpsw.h b/include/linux/platform_data/cpsw.h
new file mode 100644
index 00000000..c4e23d02
--- /dev/null
+++ b/include/linux/platform_data/cpsw.h
@@ -0,0 +1,55 @@
+/*
+ * Texas Instruments Ethernet Switch Driver
+ *
+ * Copyright (C) 2012 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __CPSW_H__
+#define __CPSW_H__
+
+#include <linux/if_ether.h>
+
+struct cpsw_slave_data {
+	u32		slave_reg_ofs;
+	u32		sliver_reg_ofs;
+	const char	*phy_id;
+	int		phy_if;
+	u8		mac_addr[ETH_ALEN];
+};
+
+struct cpsw_platform_data {
+	u32	ss_reg_ofs;	/* Subsystem control register offset */
+	u32	channels;	/* number of cpdma channels (symmetric) */
+	u32	cpdma_reg_ofs;	/* cpdma register offset */
+	u32	cpdma_sram_ofs;	/* cpdma sram offset */
+
+	u32	slaves;		/* number of slave cpgmac ports */
+	struct cpsw_slave_data	*slave_data;
+
+	u32	ale_reg_ofs;	/* address lookup engine reg offset */
+	u32	ale_entries;	/* ale table size */
+
+	u32	host_port_reg_ofs; /* cpsw cpdma host port registers */
+	u32     host_port_num; /* The port number for the host port */
+
+	u32	hw_stats_reg_ofs;  /* cpsw hardware statistics counters */
+
+	u32	bd_ram_ofs;   /* embedded buffer descriptor RAM offset*/
+	u32	bd_ram_size;  /*buffer descriptor ram size */
+	u32	hw_ram_addr; /*if the HW address for BD RAM is different */
+	bool	no_bd_ram; /* no embedded BD ram*/
+
+	u32	rx_descs;	/* Number of Rx Descriptios */
+
+	u32	mac_control;	/* Mac control register */
+};
+
+#endif /* __CPSW_H__ */
diff --git a/include/linux/platform_data/ds2482.h b/include/linux/platform_data/ds2482.h
new file mode 100644
index 00000000..5a6879e2
--- /dev/null
+++ b/include/linux/platform_data/ds2482.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2012 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __PLATFORM_DATA_DS2482__
+#define __PLATFORM_DATA_DS2482__
+
+struct ds2482_platform_data {
+	int		slpz_gpio;
+};
+
+#endif /* __PLATFORM_DATA_DS2482__ */
diff --git a/include/linux/platform_data/dwc3-exynos.h b/include/linux/platform_data/dwc3-exynos.h
new file mode 100644
index 00000000..5eb7da9b
--- /dev/null
+++ b/include/linux/platform_data/dwc3-exynos.h
@@ -0,0 +1,24 @@
+/**
+ * dwc3-exynos.h - Samsung EXYNOS DWC3 Specific Glue layer, header.
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Anton Tikhomirov <av.tikhomirov@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _DWC3_EXYNOS_H_
+#define _DWC3_EXYNOS_H_
+
+struct dwc3_exynos_data {
+	int phy_type;
+	int (*phy_init)(struct platform_device *pdev, int type);
+	int (*phy_exit)(struct platform_device *pdev, int type);
+};
+
+#endif /* _DWC3_EXYNOS_H_ */
diff --git a/include/linux/platform_data/dwc3-omap.h b/include/linux/platform_data/dwc3-omap.h
new file mode 100644
index 00000000..ada40124
--- /dev/null
+++ b/include/linux/platform_data/dwc3-omap.h
@@ -0,0 +1,47 @@
+/**
+ * dwc3-omap.h - OMAP Specific Glue layer, header.
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ * All rights reserved.
+ *
+ * Author: Felipe Balbi <balbi@ti.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+enum dwc3_omap_utmi_mode {
+	DWC3_OMAP_UTMI_MODE_UNKNOWN = 0,
+	DWC3_OMAP_UTMI_MODE_HW,
+	DWC3_OMAP_UTMI_MODE_SW,
+};
+
+struct dwc3_omap_data {
+	enum dwc3_omap_utmi_mode	utmi_mode;
+};
diff --git a/include/linux/platform_data/efm32-uart.h b/include/linux/platform_data/efm32-uart.h
new file mode 100644
index 00000000..ed0e975b
--- /dev/null
+++ b/include/linux/platform_data/efm32-uart.h
@@ -0,0 +1,18 @@
+/*
+ *
+ *
+ */
+#ifndef __LINUX_PLATFORM_DATA_EFM32_UART_H__
+#define __LINUX_PLATFORM_DATA_EFM32_UART_H__
+
+#include <linux/types.h>
+
+/**
+ * struct efm32_uart_pdata
+ * @location: pinmux location for the I/O pins (to be written to the ROUTE
+ * 	register)
+ */
+struct efm32_uart_pdata {
+	u8 location;
+};
+#endif /* ifndef __LINUX_PLATFORM_DATA_EFM32_UART_H__ */
diff --git a/include/linux/platform_data/exynos4_tmu.h b/include/linux/platform_data/exynos4_tmu.h
new file mode 100644
index 00000000..39e038cc
--- /dev/null
+++ b/include/linux/platform_data/exynos4_tmu.h
@@ -0,0 +1,83 @@
+/*
+ * exynos4_tmu.h - Samsung EXYNOS4 TMU (Thermal Management Unit)
+ *
+ *  Copyright (C) 2011 Samsung Electronics
+ *  Donggeun Kim <dg77.kim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _LINUX_EXYNOS4_TMU_H
+#define _LINUX_EXYNOS4_TMU_H
+
+enum calibration_type {
+	TYPE_ONE_POINT_TRIMMING,
+	TYPE_TWO_POINT_TRIMMING,
+	TYPE_NONE,
+};
+
+/**
+ * struct exynos4_tmu_platform_data
+ * @threshold: basic temperature for generating interrupt
+ *	       25 <= threshold <= 125 [unit: degree Celsius]
+ * @trigger_levels: array for each interrupt levels
+ *	[unit: degree Celsius]
+ *	0: temperature for trigger_level0 interrupt
+ *	   condition for trigger_level0 interrupt:
+ *		current temperature > threshold + trigger_levels[0]
+ *	1: temperature for trigger_level1 interrupt
+ *	   condition for trigger_level1 interrupt:
+ *		current temperature > threshold + trigger_levels[1]
+ *	2: temperature for trigger_level2 interrupt
+ *	   condition for trigger_level2 interrupt:
+ *		current temperature > threshold + trigger_levels[2]
+ *	3: temperature for trigger_level3 interrupt
+ *	   condition for trigger_level3 interrupt:
+ *		current temperature > threshold + trigger_levels[3]
+ * @trigger_level0_en:
+ *	1 = enable trigger_level0 interrupt,
+ *	0 = disable trigger_level0 interrupt
+ * @trigger_level1_en:
+ *	1 = enable trigger_level1 interrupt,
+ *	0 = disable trigger_level1 interrupt
+ * @trigger_level2_en:
+ *	1 = enable trigger_level2 interrupt,
+ *	0 = disable trigger_level2 interrupt
+ * @trigger_level3_en:
+ *	1 = enable trigger_level3 interrupt,
+ *	0 = disable trigger_level3 interrupt
+ * @gain: gain of amplifier in the positive-TC generator block
+ *	0 <= gain <= 15
+ * @reference_voltage: reference voltage of amplifier
+ *	in the positive-TC generator block
+ *	0 <= reference_voltage <= 31
+ * @cal_type: calibration type for temperature
+ *
+ * This structure is required for configuration of exynos4_tmu driver.
+ */
+struct exynos4_tmu_platform_data {
+	u8 threshold;
+	u8 trigger_levels[4];
+	bool trigger_level0_en;
+	bool trigger_level1_en;
+	bool trigger_level2_en;
+	bool trigger_level3_en;
+
+	u8 gain;
+	u8 reference_voltage;
+
+	enum calibration_type cal_type;
+};
+#endif /* _LINUX_EXYNOS4_TMU_H */
diff --git a/include/linux/platform_data/fsa9480.h b/include/linux/platform_data/fsa9480.h
new file mode 100644
index 00000000..72dddcb4
--- /dev/null
+++ b/include/linux/platform_data/fsa9480.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _FSA9480_H_
+#define _FSA9480_H_
+
+#define FSA9480_ATTACHED	1
+#define FSA9480_DETACHED	0
+
+struct fsa9480_platform_data {
+	void (*cfg_gpio) (void);
+	void (*usb_cb) (u8 attached);
+	void (*uart_cb) (u8 attached);
+	void (*charger_cb) (u8 attached);
+	void (*jig_cb) (u8 attached);
+	void (*reset_cb) (void);
+	void (*usb_power) (u8 on);
+	int wakeup;
+};
+
+#endif /* _FSA9480_H_ */
diff --git a/include/linux/platform_data/leds-renesas-tpu.h b/include/linux/platform_data/leds-renesas-tpu.h
new file mode 100644
index 00000000..05538708
--- /dev/null
+++ b/include/linux/platform_data/leds-renesas-tpu.h
@@ -0,0 +1,14 @@
+#ifndef __LEDS_RENESAS_TPU_H__
+#define __LEDS_RENESAS_TPU_H__
+
+struct led_renesas_tpu_config {
+	char *name;
+	unsigned pin_gpio_fn;
+	unsigned pin_gpio;
+	unsigned int channel_offset;
+	unsigned int timer_bit;
+	unsigned int max_brightness;
+	unsigned int refresh_rate;
+};
+
+#endif /* __LEDS_RENESAS_TPU_H__ */
diff --git a/include/linux/platform_data/macb.h b/include/linux/platform_data/macb.h
new file mode 100644
index 00000000..b081c724
--- /dev/null
+++ b/include/linux/platform_data/macb.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __MACB_PDATA_H__
+#define __MACB_PDATA_H__
+
+struct macb_platform_data {
+	u32		phy_mask;
+	int		phy_irq_pin;	/* PHY IRQ */
+	u8		is_rmii;	/* using RMII interface? */
+};
+
+#endif /* __MACB_PDATA_H__ */
diff --git a/include/linux/platform_data/msm_serial_hs.h b/include/linux/platform_data/msm_serial_hs.h
new file mode 100644
index 00000000..98a2046f
--- /dev/null
+++ b/include/linux/platform_data/msm_serial_hs.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Nick Pelly <npelly@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_MSM_SERIAL_HS_H
+#define __ASM_ARCH_MSM_SERIAL_HS_H
+
+#include <linux/serial_core.h>
+
+/* API to request the uart clock off or on for low power management
+ * Clients should call request_clock_off() when no uart data is expected,
+ * and must call request_clock_on() before any further uart data can be
+ * received. */
+extern void msm_hs_request_clock_off(struct uart_port *uport);
+extern void msm_hs_request_clock_on(struct uart_port *uport);
+
+/**
+ * struct msm_serial_hs_platform_data
+ * @rx_wakeup_irq: Rx activity irq
+ * @rx_to_inject: extra character to be inserted to Rx tty on wakeup
+ * @inject_rx: 1 = insert rx_to_inject. 0 = do not insert extra character
+ * @exit_lpm_cb: function called before every Tx transaction
+ *
+ * This is an optional structure required for UART Rx GPIO IRQ based
+ * wakeup from low power state. UART wakeup can be triggered by RX activity
+ * (using a wakeup GPIO on the UART RX pin). This should only be used if
+ * there is not a wakeup GPIO on the UART CTS, and the first RX byte is
+ * known (eg., with the Bluetooth Texas Instruments HCILL protocol),
+ * since the first RX byte will always be lost. RTS will be asserted even
+ * while the UART is clocked off in this mode of operation.
+ */
+struct msm_serial_hs_platform_data {
+	int rx_wakeup_irq;
+	unsigned char inject_rx_on_wakeup;
+	char rx_to_inject;
+	void (*exit_lpm_cb)(struct uart_port *);
+};
+
+#endif
diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h
new file mode 100644
index 00000000..d94804ac
--- /dev/null
+++ b/include/linux/platform_data/mv_usb.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MV_PLATFORM_USB_H
+#define __MV_PLATFORM_USB_H
+
+enum pxa_ehci_type {
+	EHCI_UNDEFINED = 0,
+	PXA_U2OEHCI,	/* pxa 168, 9xx */
+	PXA_SPH,	/* pxa 168, 9xx SPH */
+	MMP3_HSIC,	/* mmp3 hsic */
+	MMP3_FSIC,	/* mmp3 fsic */
+};
+
+enum {
+	MV_USB_MODE_OTG,
+	MV_USB_MODE_HOST,
+};
+
+enum {
+	VBUS_LOW	= 0,
+	VBUS_HIGH	= 1 << 0,
+};
+
+struct mv_usb_addon_irq {
+	unsigned int	irq;
+	int		(*poll)(void);
+};
+
+struct mv_usb_platform_data {
+	unsigned int		clknum;
+	char			**clkname;
+	struct mv_usb_addon_irq	*id;	/* Only valid for OTG. ID pin change*/
+	struct mv_usb_addon_irq	*vbus;	/* valid for OTG/UDC. VBUS change*/
+
+	/* only valid for HCD. OTG or Host only*/
+	unsigned int		mode;
+
+	/* This flag is used for that needs id pin checked by otg */
+	unsigned int    disable_otg_clock_gating:1;
+	/* Force a_bus_req to be asserted */
+	 unsigned int    otg_force_a_bus_req:1;
+
+	int	(*phy_init)(void __iomem *regbase);
+	void	(*phy_deinit)(void __iomem *regbase);
+	int	(*set_vbus)(unsigned int vbus);
+	int     (*private_init)(void __iomem *opregs, void __iomem *phyregs);
+};
+
+#ifndef CONFIG_HAVE_CLK
+/* Dummy stub for clk framework */
+#define clk_get(dev, id)       NULL
+#define clk_put(clock)         do {} while (0)
+#define clk_enable(clock)      do {} while (0)
+#define clk_disable(clock)     do {} while (0)
+#endif
+
+#endif
diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h
new file mode 100644
index 00000000..88734e87
--- /dev/null
+++ b/include/linux/platform_data/ntc_thermistor.h
@@ -0,0 +1,53 @@
+/*
+ * ntc_thermistor.h - NTC Thermistors
+ *
+ *  Copyright (C) 2010 Samsung Electronics
+ *  MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef _LINUX_NTC_H
+#define _LINUX_NTC_H
+
+enum ntc_thermistor_type {
+	TYPE_NCPXXWB473,
+	TYPE_NCPXXWL333,
+};
+
+struct ntc_thermistor_platform_data {
+	/*
+	 * One (not both) of read_uV and read_ohm should be provided and only
+	 * one of the two should be provided.
+	 * Both functions should return negative value for an error case.
+	 *
+	 * pullup_uV, pullup_ohm, pulldown_ohm, and connect are required to use
+	 * read_uV()
+	 *
+	 * How to setup pullup_ohm, pulldown_ohm, and connect is
+	 * described at Documentation/hwmon/ntc_thermistor
+	 *
+	 * pullup/down_ohm: 0 for infinite / not-connected
+	 */
+	int (*read_uV)(void);
+	unsigned int pullup_uV;
+
+	unsigned int pullup_ohm;
+	unsigned int pulldown_ohm;
+	enum { NTC_CONNECTED_POSITIVE, NTC_CONNECTED_GROUND } connect;
+
+	int (*read_ohm)(void);
+};
+
+#endif /* _LINUX_NTC_H */
diff --git a/include/linux/platform_data/omap-abe-twl6040.h b/include/linux/platform_data/omap-abe-twl6040.h
new file mode 100644
index 00000000..5d298ac1
--- /dev/null
+++ b/include/linux/platform_data/omap-abe-twl6040.h
@@ -0,0 +1,49 @@
+/**
+ * omap-abe-twl6040.h - ASoC machine driver OMAP4+ devices, header.
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com
+ * All rights reserved.
+ *
+ * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef _OMAP_ABE_TWL6040_H_
+#define _OMAP_ABE_TWL6040_H_
+
+/* To select if only one channel is connected in a stereo port */
+#define ABE_TWL6040_LEFT	(1 << 0)
+#define ABE_TWL6040_RIGHT	(1 << 1)
+
+struct omap_abe_twl6040_data {
+	char *card_name;
+	/* Feature flags for connected audio pins */
+	u8	has_hs;
+	u8	has_hf;
+	bool	has_ep;
+	u8	has_aux;
+	u8	has_vibra;
+	bool	has_dmic;
+	bool	has_hsmic;
+	bool	has_mainmic;
+	bool	has_submic;
+	u8	has_afm;
+	/* Other features */
+	bool	jack_detection;	/* board can detect jack events */
+	int	mclk_freq;	/* MCLK frequency speed for twl6040 */
+};
+
+#endif /* _OMAP_ABE_TWL6040_H_ */
diff --git a/include/linux/platform_data/omap4-keypad.h b/include/linux/platform_data/omap4-keypad.h
new file mode 100644
index 00000000..4eef5fb0
--- /dev/null
+++ b/include/linux/platform_data/omap4-keypad.h
@@ -0,0 +1,13 @@
+#ifndef __LINUX_INPUT_OMAP4_KEYPAD_H
+#define __LINUX_INPUT_OMAP4_KEYPAD_H
+
+#include <linux/input/matrix_keypad.h>
+
+struct omap4_keypad_platform_data {
+	const struct matrix_keymap_data *keymap_data;
+
+	u8 rows;
+	u8 cols;
+};
+
+#endif /* __LINUX_INPUT_OMAP4_KEYPAD_H */
diff --git a/include/linux/platform_data/pxa_sdhci.h b/include/linux/platform_data/pxa_sdhci.h
new file mode 100644
index 00000000..51ad0995
--- /dev/null
+++ b/include/linux/platform_data/pxa_sdhci.h
@@ -0,0 +1,60 @@
+/*
+ * include/linux/platform_data/pxa_sdhci.h
+ *
+ * Copyright 2010 Marvell
+ *	Zhangfei Gao <zhangfei.gao@marvell.com>
+ *
+ * PXA Platform - SDHCI platform data definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _PXA_SDHCI_H_
+#define _PXA_SDHCI_H_
+
+/* pxa specific flag */
+/* Require clock free running */
+#define PXA_FLAG_ENABLE_CLOCK_GATING (1<<0)
+/* card always wired to host, like on-chip emmc */
+#define PXA_FLAG_CARD_PERMANENT	(1<<1)
+/* Board design supports 8-bit data on SD/SDIO BUS */
+#define PXA_FLAG_SD_8_BIT_CAPABLE_SLOT (1<<2)
+
+/*
+ * struct pxa_sdhci_platdata() - Platform device data for PXA SDHCI
+ * @flags: flags for platform requirement
+ * @clk_delay_cycles:
+ *	mmp2: each step is roughly 100ps, 5bits width
+ *	pxa910: each step is 1ns, 4bits width
+ * @clk_delay_sel: select clk_delay, used on pxa910
+ *	0: choose feedback clk
+ *	1: choose feedback clk + delay value
+ *	2: choose internal clk
+ * @clk_delay_enable: enable clk_delay or not, used on pxa910
+ * @ext_cd_gpio: gpio pin used for external CD line
+ * @ext_cd_gpio_invert: invert values for external CD gpio line
+ * @max_speed: the maximum speed supported
+ * @host_caps: Standard MMC host capabilities bit field.
+ * @quirks: quirks of platfrom
+ * @pm_caps: pm_caps of platfrom
+ */
+struct sdhci_pxa_platdata {
+	unsigned int	flags;
+	unsigned int	clk_delay_cycles;
+	unsigned int	clk_delay_sel;
+	bool		clk_delay_enable;
+	unsigned int	ext_cd_gpio;
+	bool		ext_cd_gpio_invert;
+	unsigned int	max_speed;
+	unsigned int	host_caps;
+	unsigned int	quirks;
+	unsigned int	pm_caps;
+};
+
+struct sdhci_pxa {
+	u8	clk_enable;
+	u8	power_mode;
+};
+#endif /* _PXA_SDHCI_H_ */
diff --git a/include/linux/platform_data/s3c-hsudc.h b/include/linux/platform_data/s3c-hsudc.h
new file mode 100644
index 00000000..6fa10933
--- /dev/null
+++ b/include/linux/platform_data/s3c-hsudc.h
@@ -0,0 +1,34 @@
+/*
+ * S3C24XX USB 2.0 High-speed USB controller gadget driver
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * The S3C24XX USB 2.0 high-speed USB controller supports upto 9 endpoints.
+ * Each endpoint can be configured as either in or out endpoint. Endpoints
+ * can be configured for Bulk or Interrupt transfer mode.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __LINUX_USB_S3C_HSUDC_H
+#define __LINUX_USB_S3C_HSUDC_H
+
+/**
+ * s3c24xx_hsudc_platdata - Platform data for USB High-Speed gadget controller.
+ * @epnum: Number of endpoints to be instantiated by the controller driver.
+ * @gpio_init: Platform specific USB related GPIO initialization.
+ * @gpio_uninit: Platform specific USB releted GPIO uninitialzation.
+ *
+ * Representation of platform data for the S3C24XX USB 2.0 High Speed gadget
+ * controllers.
+ */
+struct s3c24xx_hsudc_platdata {
+	unsigned int	epnum;
+	void		(*gpio_init)(void);
+	void		(*gpio_uninit)(void);
+};
+
+#endif	/* __LINUX_USB_S3C_HSUDC_H */
diff --git a/include/linux/platform_data/spear_thermal.h b/include/linux/platform_data/spear_thermal.h
new file mode 100644
index 00000000..724f2e1c
--- /dev/null
+++ b/include/linux/platform_data/spear_thermal.h
@@ -0,0 +1,26 @@
+/*
+ * SPEAr thermal driver platform data.
+ *
+ * Copyright (C) 2011-2012 ST Microelectronics
+ * Author: Vincenzo Frascino <vincenzo.frascino@st.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef SPEAR_THERMAL_H
+#define SPEAR_THERMAL_H
+
+/* SPEAr Thermal Sensor Platform Data */
+struct spear_thermal_pdata {
+	/* flags used to enable thermal sensor */
+	unsigned int thermal_flags;
+};
+
+#endif /* SPEAR_THERMAL_H */
diff --git a/include/linux/platform_data/tegra_emc.h b/include/linux/platform_data/tegra_emc.h
new file mode 100644
index 00000000..df67505e
--- /dev/null
+++ b/include/linux/platform_data/tegra_emc.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@android.com>
+ *	Olof Johansson <olof@lixom.net>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __TEGRA_EMC_H_
+#define __TEGRA_EMC_H_
+
+#define TEGRA_EMC_NUM_REGS 46
+
+struct tegra_emc_table {
+	unsigned long rate;
+	u32 regs[TEGRA_EMC_NUM_REGS];
+};
+
+struct tegra_emc_pdata {
+	int num_tables;
+	struct tegra_emc_table *tables;
+};
+
+#endif
diff --git a/include/linux/platform_data/tegra_usb.h b/include/linux/platform_data/tegra_usb.h
new file mode 100644
index 00000000..6bca5b56
--- /dev/null
+++ b/include/linux/platform_data/tegra_usb.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _TEGRA_USB_H_
+#define _TEGRA_USB_H_
+
+enum tegra_usb_operating_modes {
+	TEGRA_USB_DEVICE,
+	TEGRA_USB_HOST,
+	TEGRA_USB_OTG,
+};
+
+struct tegra_ehci_platform_data {
+	enum tegra_usb_operating_modes operating_mode;
+	/* power down the phy on bus suspend */
+	int power_down_on_bus_suspend;
+	void *phy_config;
+};
+
+#endif /* _TEGRA_USB_H_ */
diff --git a/include/linux/platform_data/uio_pruss.h b/include/linux/platform_data/uio_pruss.h
new file mode 100644
index 00000000..f39140aa
--- /dev/null
+++ b/include/linux/platform_data/uio_pruss.h
@@ -0,0 +1,25 @@
+/*
+ * include/linux/platform_data/uio_pruss.h
+ *
+ * Platform data for uio_pruss driver
+ *
+ * Copyright (C) 2010-11 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _UIO_PRUSS_H_
+#define _UIO_PRUSS_H_
+
+/* To configure the PRUSS INTC base offset for UIO driver */
+struct uio_pruss_pdata {
+	u32	pintc_base;
+};
+#endif /* _UIO_PRUSS_H_ */
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
new file mode 100644
index 00000000..60e9994e
--- /dev/null
+++ b/include/linux/platform_device.h
@@ -0,0 +1,291 @@
+/*
+ * platform_device.h - generic, centralized driver model
+ *
+ * Copyright (c) 2001-2003 Patrick Mochel <mochel@osdl.org>
+ *
+ * This file is released under the GPLv2
+ *
+ * See Documentation/driver-model/ for more information.
+ */
+
+#ifndef _PLATFORM_DEVICE_H_
+#define _PLATFORM_DEVICE_H_
+
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+
+struct mfd_cell;
+
+struct platform_device {
+	const char	* name;
+	int		id;
+	struct device	dev;
+	u32		num_resources;
+	struct resource	* resource;
+
+	const struct platform_device_id	*id_entry;
+
+	/* MFD cell pointer */
+	struct mfd_cell *mfd_cell;
+
+	/* arch specific additions */
+	struct pdev_archdata	archdata;
+};
+
+#define platform_get_device_id(pdev)	((pdev)->id_entry)
+
+#define to_platform_device(x) container_of((x), struct platform_device, dev)
+
+extern int platform_device_register(struct platform_device *);
+extern void platform_device_unregister(struct platform_device *);
+
+extern struct bus_type platform_bus_type;
+extern struct device platform_bus;
+
+extern void arch_setup_pdev_archdata(struct platform_device *);
+extern struct resource *platform_get_resource(struct platform_device *, unsigned int, unsigned int);
+extern int platform_get_irq(struct platform_device *, unsigned int);
+extern struct resource *platform_get_resource_byname(struct platform_device *, unsigned int, const char *);
+extern int platform_get_irq_byname(struct platform_device *, const char *);
+extern int platform_add_devices(struct platform_device **, int);
+
+struct platform_device_info {
+		struct device *parent;
+
+		const char *name;
+		int id;
+
+		const struct resource *res;
+		unsigned int num_res;
+
+		const void *data;
+		size_t size_data;
+		u64 dma_mask;
+};
+extern struct platform_device *platform_device_register_full(
+		const struct platform_device_info *pdevinfo);
+
+/**
+ * platform_device_register_resndata - add a platform-level device with
+ * resources and platform-specific data
+ *
+ * @parent: parent device for the device we're adding
+ * @name: base name of the device we're adding
+ * @id: instance id
+ * @res: set of resources that needs to be allocated for the device
+ * @num: number of resources
+ * @data: platform specific data for this platform device
+ * @size: size of platform specific data
+ *
+ * Returns &struct platform_device pointer on success, or ERR_PTR() on error.
+ */
+static inline struct platform_device *platform_device_register_resndata(
+		struct device *parent, const char *name, int id,
+		const struct resource *res, unsigned int num,
+		const void *data, size_t size) {
+
+	struct platform_device_info pdevinfo = {
+		.parent = parent,
+		.name = name,
+		.id = id,
+		.res = res,
+		.num_res = num,
+		.data = data,
+		.size_data = size,
+		.dma_mask = 0,
+	};
+
+	return platform_device_register_full(&pdevinfo);
+}
+
+/**
+ * platform_device_register_simple - add a platform-level device and its resources
+ * @name: base name of the device we're adding
+ * @id: instance id
+ * @res: set of resources that needs to be allocated for the device
+ * @num: number of resources
+ *
+ * This function creates a simple platform device that requires minimal
+ * resource and memory management. Canned release function freeing memory
+ * allocated for the device allows drivers using such devices to be
+ * unloaded without waiting for the last reference to the device to be
+ * dropped.
+ *
+ * This interface is primarily intended for use with legacy drivers which
+ * probe hardware directly.  Because such drivers create sysfs device nodes
+ * themselves, rather than letting system infrastructure handle such device
+ * enumeration tasks, they don't fully conform to the Linux driver model.
+ * In particular, when such drivers are built as modules, they can't be
+ * "hotplugged".
+ *
+ * Returns &struct platform_device pointer on success, or ERR_PTR() on error.
+ */
+static inline struct platform_device *platform_device_register_simple(
+		const char *name, int id,
+		const struct resource *res, unsigned int num)
+{
+	return platform_device_register_resndata(NULL, name, id,
+			res, num, NULL, 0);
+}
+
+/**
+ * platform_device_register_data - add a platform-level device with platform-specific data
+ * @parent: parent device for the device we're adding
+ * @name: base name of the device we're adding
+ * @id: instance id
+ * @data: platform specific data for this platform device
+ * @size: size of platform specific data
+ *
+ * This function creates a simple platform device that requires minimal
+ * resource and memory management. Canned release function freeing memory
+ * allocated for the device allows drivers using such devices to be
+ * unloaded without waiting for the last reference to the device to be
+ * dropped.
+ *
+ * Returns &struct platform_device pointer on success, or ERR_PTR() on error.
+ */
+static inline struct platform_device *platform_device_register_data(
+		struct device *parent, const char *name, int id,
+		const void *data, size_t size)
+{
+	return platform_device_register_resndata(parent, name, id,
+			NULL, 0, data, size);
+}
+
+extern struct platform_device *platform_device_alloc(const char *name, int id);
+extern int platform_device_add_resources(struct platform_device *pdev,
+					 const struct resource *res,
+					 unsigned int num);
+extern int platform_device_add_data(struct platform_device *pdev, const void *data, size_t size);
+extern int platform_device_add(struct platform_device *pdev);
+extern void platform_device_del(struct platform_device *pdev);
+extern void platform_device_put(struct platform_device *pdev);
+
+struct platform_driver {
+	int (*probe)(struct platform_device *);
+	int (*remove)(struct platform_device *);
+	void (*shutdown)(struct platform_device *);
+	int (*suspend)(struct platform_device *, pm_message_t state);
+	int (*resume)(struct platform_device *);
+	struct device_driver driver;
+	const struct platform_device_id *id_table;
+};
+
+extern int platform_driver_register(struct platform_driver *);
+extern void platform_driver_unregister(struct platform_driver *);
+
+/* non-hotpluggable platform devices may use this so that probe() and
+ * its support may live in __init sections, conserving runtime memory.
+ */
+extern int platform_driver_probe(struct platform_driver *driver,
+		int (*probe)(struct platform_device *));
+
+static inline void *platform_get_drvdata(const struct platform_device *pdev)
+{
+	return dev_get_drvdata(&pdev->dev);
+}
+
+static inline void platform_set_drvdata(struct platform_device *pdev, void *data)
+{
+	dev_set_drvdata(&pdev->dev, data);
+}
+
+/* module_platform_driver() - Helper macro for drivers that don't do
+ * anything special in module init/exit.  This eliminates a lot of
+ * boilerplate.  Each module may only use this macro once, and
+ * calling it replaces module_init() and module_exit()
+ */
+#define module_platform_driver(__platform_driver) \
+	module_driver(__platform_driver, platform_driver_register, \
+			platform_driver_unregister)
+
+extern struct platform_device *platform_create_bundle(struct platform_driver *driver,
+					int (*probe)(struct platform_device *),
+					struct resource *res, unsigned int n_res,
+					const void *data, size_t size);
+
+/* early platform driver interface */
+struct early_platform_driver {
+	const char *class_str;
+	struct platform_driver *pdrv;
+	struct list_head list;
+	int requested_id;
+	char *buffer;
+	int bufsize;
+};
+
+#define EARLY_PLATFORM_ID_UNSET -2
+#define EARLY_PLATFORM_ID_ERROR -3
+
+extern int early_platform_driver_register(struct early_platform_driver *epdrv,
+					  char *buf);
+extern void early_platform_add_devices(struct platform_device **devs, int num);
+
+static inline int is_early_platform_device(struct platform_device *pdev)
+{
+	return !pdev->dev.driver;
+}
+
+extern void early_platform_driver_register_all(char *class_str);
+extern int early_platform_driver_probe(char *class_str,
+				       int nr_probe, int user_only);
+extern void early_platform_cleanup(void);
+
+#define early_platform_init(class_string, platdrv)		\
+	early_platform_init_buffer(class_string, platdrv, NULL, 0)
+
+#ifndef MODULE
+#define early_platform_init_buffer(class_string, platdrv, buf, bufsiz)	\
+static __initdata struct early_platform_driver early_driver = {		\
+	.class_str = class_string,					\
+	.buffer = buf,							\
+	.bufsize = bufsiz,						\
+	.pdrv = platdrv,						\
+	.requested_id = EARLY_PLATFORM_ID_UNSET,			\
+};									\
+static int __init early_platform_driver_setup_func(char *buffer)	\
+{									\
+	return early_platform_driver_register(&early_driver, buffer);	\
+}									\
+early_param(class_string, early_platform_driver_setup_func)
+#else /* MODULE */
+#define early_platform_init_buffer(class_string, platdrv, buf, bufsiz)	\
+static inline char *early_platform_driver_setup_func(void)		\
+{									\
+	return bufsiz ? buf : NULL;					\
+}
+#endif /* MODULE */
+
+#ifdef CONFIG_SUSPEND
+extern int platform_pm_suspend(struct device *dev);
+extern int platform_pm_resume(struct device *dev);
+#else
+#define platform_pm_suspend		NULL
+#define platform_pm_resume		NULL
+#endif
+
+#ifdef CONFIG_HIBERNATE_CALLBACKS
+extern int platform_pm_freeze(struct device *dev);
+extern int platform_pm_thaw(struct device *dev);
+extern int platform_pm_poweroff(struct device *dev);
+extern int platform_pm_restore(struct device *dev);
+#else
+#define platform_pm_freeze		NULL
+#define platform_pm_thaw		NULL
+#define platform_pm_poweroff		NULL
+#define platform_pm_restore		NULL
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+#define USE_PLATFORM_PM_SLEEP_OPS \
+	.suspend = platform_pm_suspend, \
+	.resume = platform_pm_resume, \
+	.freeze = platform_pm_freeze, \
+	.thaw = platform_pm_thaw, \
+	.poweroff = platform_pm_poweroff, \
+	.restore = platform_pm_restore,
+#else
+#define USE_PLATFORM_PM_SLEEP_OPS
+#endif
+
+#endif /* _PLATFORM_DEVICE_H_ */
diff --git a/include/linux/plist.h b/include/linux/plist.h
new file mode 100644
index 00000000..aa0fb390
--- /dev/null
+++ b/include/linux/plist.h
@@ -0,0 +1,255 @@
+/*
+ * Descending-priority-sorted double-linked list
+ *
+ * (C) 2002-2003 Intel Corp
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>.
+ *
+ * 2001-2005 (c) MontaVista Software, Inc.
+ * Daniel Walker <dwalker@mvista.com>
+ *
+ * (C) 2005 Thomas Gleixner <tglx@linutronix.de>
+ *
+ * Simplifications of the original code by
+ * Oleg Nesterov <oleg@tv-sign.ru>
+ *
+ * Licensed under the FSF's GNU Public License v2 or later.
+ *
+ * Based on simple lists (include/linux/list.h).
+ *
+ * This is a priority-sorted list of nodes; each node has a
+ * priority from INT_MIN (highest) to INT_MAX (lowest).
+ *
+ * Addition is O(K), removal is O(1), change of priority of a node is
+ * O(K) and K is the number of RT priority levels used in the system.
+ * (1 <= K <= 99)
+ *
+ * This list is really a list of lists:
+ *
+ *  - The tier 1 list is the prio_list, different priority nodes.
+ *
+ *  - The tier 2 list is the node_list, serialized nodes.
+ *
+ * Simple ASCII art explanation:
+ *
+ * pl:prio_list (only for plist_node)
+ * nl:node_list
+ *   HEAD|             NODE(S)
+ *       |
+ *       ||------------------------------------|
+ *       ||->|pl|<->|pl|<--------------->|pl|<-|
+ *       |   |10|   |21|   |21|   |21|   |40|   (prio)
+ *       |   |  |   |  |   |  |   |  |   |  |
+ *       |   |  |   |  |   |  |   |  |   |  |
+ * |->|nl|<->|nl|<->|nl|<->|nl|<->|nl|<->|nl|<-|
+ * |-------------------------------------------|
+ *
+ * The nodes on the prio_list list are sorted by priority to simplify
+ * the insertion of new nodes. There are no nodes with duplicate
+ * priorites on the list.
+ *
+ * The nodes on the node_list are ordered by priority and can contain
+ * entries which have the same priority. Those entries are ordered
+ * FIFO
+ *
+ * Addition means: look for the prio_list node in the prio_list
+ * for the priority of the node and insert it before the node_list
+ * entry of the next prio_list node. If it is the first node of
+ * that priority, add it to the prio_list in the right position and
+ * insert it into the serialized node_list list
+ *
+ * Removal means remove it from the node_list and remove it from
+ * the prio_list if the node_list list_head is non empty. In case
+ * of removal from the prio_list it must be checked whether other
+ * entries of the same priority are on the list or not. If there
+ * is another entry of the same priority then this entry has to
+ * replace the removed entry on the prio_list. If the entry which
+ * is removed is the only entry of this priority then a simple
+ * remove from both list is sufficient.
+ *
+ * INT_MIN is the highest priority, 0 is the medium highest, INT_MAX
+ * is lowest priority.
+ *
+ * No locking is done, up to the caller.
+ *
+ */
+#ifndef _LINUX_PLIST_H_
+#define _LINUX_PLIST_H_
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+
+struct plist_head {
+	struct list_head node_list;
+};
+
+struct plist_node {
+	int			prio;
+	struct list_head	prio_list;
+	struct list_head	node_list;
+};
+
+/**
+ * PLIST_HEAD_INIT - static struct plist_head initializer
+ * @head:	struct plist_head variable name
+ */
+#define PLIST_HEAD_INIT(head)				\
+{							\
+	.node_list = LIST_HEAD_INIT((head).node_list)	\
+}
+
+/**
+ * PLIST_NODE_INIT - static struct plist_node initializer
+ * @node:	struct plist_node variable name
+ * @__prio:	initial node priority
+ */
+#define PLIST_NODE_INIT(node, __prio)			\
+{							\
+	.prio  = (__prio),				\
+	.prio_list = LIST_HEAD_INIT((node).prio_list),	\
+	.node_list = LIST_HEAD_INIT((node).node_list),	\
+}
+
+/**
+ * plist_head_init - dynamic struct plist_head initializer
+ * @head:	&struct plist_head pointer
+ */
+static inline void
+plist_head_init(struct plist_head *head)
+{
+	INIT_LIST_HEAD(&head->node_list);
+}
+
+/**
+ * plist_node_init - Dynamic struct plist_node initializer
+ * @node:	&struct plist_node pointer
+ * @prio:	initial node priority
+ */
+static inline void plist_node_init(struct plist_node *node, int prio)
+{
+	node->prio = prio;
+	INIT_LIST_HEAD(&node->prio_list);
+	INIT_LIST_HEAD(&node->node_list);
+}
+
+extern void plist_add(struct plist_node *node, struct plist_head *head);
+extern void plist_del(struct plist_node *node, struct plist_head *head);
+
+/**
+ * plist_for_each - iterate over the plist
+ * @pos:	the type * to use as a loop counter
+ * @head:	the head for your list
+ */
+#define plist_for_each(pos, head)	\
+	 list_for_each_entry(pos, &(head)->node_list, node_list)
+
+/**
+ * plist_for_each_safe - iterate safely over a plist of given type
+ * @pos:	the type * to use as a loop counter
+ * @n:	another type * to use as temporary storage
+ * @head:	the head for your list
+ *
+ * Iterate over a plist of given type, safe against removal of list entry.
+ */
+#define plist_for_each_safe(pos, n, head)	\
+	 list_for_each_entry_safe(pos, n, &(head)->node_list, node_list)
+
+/**
+ * plist_for_each_entry	- iterate over list of given type
+ * @pos:	the type * to use as a loop counter
+ * @head:	the head for your list
+ * @mem:	the name of the list_struct within the struct
+ */
+#define plist_for_each_entry(pos, head, mem)	\
+	 list_for_each_entry(pos, &(head)->node_list, mem.node_list)
+
+/**
+ * plist_for_each_entry_safe - iterate safely over list of given type
+ * @pos:	the type * to use as a loop counter
+ * @n:		another type * to use as temporary storage
+ * @head:	the head for your list
+ * @m:		the name of the list_struct within the struct
+ *
+ * Iterate over list of given type, safe against removal of list entry.
+ */
+#define plist_for_each_entry_safe(pos, n, head, m)	\
+	list_for_each_entry_safe(pos, n, &(head)->node_list, m.node_list)
+
+/**
+ * plist_head_empty - return !0 if a plist_head is empty
+ * @head:	&struct plist_head pointer
+ */
+static inline int plist_head_empty(const struct plist_head *head)
+{
+	return list_empty(&head->node_list);
+}
+
+/**
+ * plist_node_empty - return !0 if plist_node is not on a list
+ * @node:	&struct plist_node pointer
+ */
+static inline int plist_node_empty(const struct plist_node *node)
+{
+	return list_empty(&node->node_list);
+}
+
+/* All functions below assume the plist_head is not empty. */
+
+/**
+ * plist_first_entry - get the struct for the first entry
+ * @head:	the &struct plist_head pointer
+ * @type:	the type of the struct this is embedded in
+ * @member:	the name of the list_struct within the struct
+ */
+#ifdef CONFIG_DEBUG_PI_LIST
+# define plist_first_entry(head, type, member)	\
+({ \
+	WARN_ON(plist_head_empty(head)); \
+	container_of(plist_first(head), type, member); \
+})
+#else
+# define plist_first_entry(head, type, member)	\
+	container_of(plist_first(head), type, member)
+#endif
+
+/**
+ * plist_last_entry - get the struct for the last entry
+ * @head:	the &struct plist_head pointer
+ * @type:	the type of the struct this is embedded in
+ * @member:	the name of the list_struct within the struct
+ */
+#ifdef CONFIG_DEBUG_PI_LIST
+# define plist_last_entry(head, type, member)	\
+({ \
+	WARN_ON(plist_head_empty(head)); \
+	container_of(plist_last(head), type, member); \
+})
+#else
+# define plist_last_entry(head, type, member)	\
+	container_of(plist_last(head), type, member)
+#endif
+
+/**
+ * plist_first - return the first node (and thus, highest priority)
+ * @head:	the &struct plist_head pointer
+ *
+ * Assumes the plist is _not_ empty.
+ */
+static inline struct plist_node *plist_first(const struct plist_head *head)
+{
+	return list_entry(head->node_list.next,
+			  struct plist_node, node_list);
+}
+
+/**
+ * plist_last - return the last node (and thus, lowest priority)
+ * @head:	the &struct plist_head pointer
+ *
+ * Assumes the plist is _not_ empty.
+ */
+static inline struct plist_node *plist_last(const struct plist_head *head)
+{
+	return list_entry(head->node_list.prev,
+			  struct plist_node, node_list);
+}
+
+#endif
diff --git a/include/linux/pm.h b/include/linux/pm.h
new file mode 100644
index 00000000..f067e60a
--- /dev/null
+++ b/include/linux/pm.h
@@ -0,0 +1,698 @@
+/*
+ *  pm.h - Power management interface
+ *
+ *  Copyright (C) 2000 Andrew Henroid
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _LINUX_PM_H
+#define _LINUX_PM_H
+
+#include <linux/list.h>
+#include <linux/workqueue.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/timer.h>
+#include <linux/completion.h>
+
+/*
+ * Callbacks for platform drivers to implement.
+ */
+extern void (*pm_idle)(void);
+extern void (*pm_power_off)(void);
+extern void (*pm_power_off_prepare)(void);
+
+/*
+ * Device power management
+ */
+
+struct device;
+
+#ifdef CONFIG_PM
+extern const char power_group_name[];		/* = "power" */
+#else
+#define power_group_name	NULL
+#endif
+
+typedef struct pm_message {
+	int event;
+} pm_message_t;
+
+/**
+ * struct dev_pm_ops - device PM callbacks
+ *
+ * Several device power state transitions are externally visible, affecting
+ * the state of pending I/O queues and (for drivers that touch hardware)
+ * interrupts, wakeups, DMA, and other hardware state.  There may also be
+ * internal transitions to various low-power modes which are transparent
+ * to the rest of the driver stack (such as a driver that's ON gating off
+ * clocks which are not in active use).
+ *
+ * The externally visible transitions are handled with the help of callbacks
+ * included in this structure in such a way that two levels of callbacks are
+ * involved.  First, the PM core executes callbacks provided by PM domains,
+ * device types, classes and bus types.  They are the subsystem-level callbacks
+ * supposed to execute callbacks provided by device drivers, although they may
+ * choose not to do that.  If the driver callbacks are executed, they have to
+ * collaborate with the subsystem-level callbacks to achieve the goals
+ * appropriate for the given system transition, given transition phase and the
+ * subsystem the device belongs to.
+ *
+ * @prepare: The principal role of this callback is to prevent new children of
+ *	the device from being registered after it has returned (the driver's
+ *	subsystem and generally the rest of the kernel is supposed to prevent
+ *	new calls to the probe method from being made too once @prepare() has
+ *	succeeded).  If @prepare() detects a situation it cannot handle (e.g.
+ *	registration of a child already in progress), it may return -EAGAIN, so
+ *	that the PM core can execute it once again (e.g. after a new child has
+ *	been registered) to recover from the race condition.
+ *	This method is executed for all kinds of suspend transitions and is
+ *	followed by one of the suspend callbacks: @suspend(), @freeze(), or
+ *	@poweroff().  The PM core executes subsystem-level @prepare() for all
+ *	devices before starting to invoke suspend callbacks for any of them, so
+ *	generally devices may be assumed to be functional or to respond to
+ *	runtime resume requests while @prepare() is being executed.  However,
+ *	device drivers may NOT assume anything about the availability of user
+ *	space at that time and it is NOT valid to request firmware from within
+ *	@prepare() (it's too late to do that).  It also is NOT valid to allocate
+ *	substantial amounts of memory from @prepare() in the GFP_KERNEL mode.
+ *	[To work around these limitations, drivers may register suspend and
+ *	hibernation notifiers to be executed before the freezing of tasks.]
+ *
+ * @complete: Undo the changes made by @prepare().  This method is executed for
+ *	all kinds of resume transitions, following one of the resume callbacks:
+ *	@resume(), @thaw(), @restore().  Also called if the state transition
+ *	fails before the driver's suspend callback: @suspend(), @freeze() or
+ *	@poweroff(), can be executed (e.g. if the suspend callback fails for one
+ *	of the other devices that the PM core has unsuccessfully attempted to
+ *	suspend earlier).
+ *	The PM core executes subsystem-level @complete() after it has executed
+ *	the appropriate resume callbacks for all devices.
+ *
+ * @suspend: Executed before putting the system into a sleep state in which the
+ *	contents of main memory are preserved.  The exact action to perform
+ *	depends on the device's subsystem (PM domain, device type, class or bus
+ *	type), but generally the device must be quiescent after subsystem-level
+ *	@suspend() has returned, so that it doesn't do any I/O or DMA.
+ *	Subsystem-level @suspend() is executed for all devices after invoking
+ *	subsystem-level @prepare() for all of them.
+ *
+ * @suspend_late: Continue operations started by @suspend().  For a number of
+ *	devices @suspend_late() may point to the same callback routine as the
+ *	runtime suspend callback.
+ *
+ * @resume: Executed after waking the system up from a sleep state in which the
+ *	contents of main memory were preserved.  The exact action to perform
+ *	depends on the device's subsystem, but generally the driver is expected
+ *	to start working again, responding to hardware events and software
+ *	requests (the device itself may be left in a low-power state, waiting
+ *	for a runtime resume to occur).  The state of the device at the time its
+ *	driver's @resume() callback is run depends on the platform and subsystem
+ *	the device belongs to.  On most platforms, there are no restrictions on
+ *	availability of resources like clocks during @resume().
+ *	Subsystem-level @resume() is executed for all devices after invoking
+ *	subsystem-level @resume_noirq() for all of them.
+ *
+ * @resume_early: Prepare to execute @resume().  For a number of devices
+ *	@resume_early() may point to the same callback routine as the runtime
+ *	resume callback.
+ *
+ * @freeze: Hibernation-specific, executed before creating a hibernation image.
+ *	Analogous to @suspend(), but it should not enable the device to signal
+ *	wakeup events or change its power state.  The majority of subsystems
+ *	(with the notable exception of the PCI bus type) expect the driver-level
+ *	@freeze() to save the device settings in memory to be used by @restore()
+ *	during the subsequent resume from hibernation.
+ *	Subsystem-level @freeze() is executed for all devices after invoking
+ *	subsystem-level @prepare() for all of them.
+ *
+ * @freeze_late: Continue operations started by @freeze().  Analogous to
+ *	@suspend_late(), but it should not enable the device to signal wakeup
+ *	events or change its power state.
+ *
+ * @thaw: Hibernation-specific, executed after creating a hibernation image OR
+ *	if the creation of an image has failed.  Also executed after a failing
+ *	attempt to restore the contents of main memory from such an image.
+ *	Undo the changes made by the preceding @freeze(), so the device can be
+ *	operated in the same way as immediately before the call to @freeze().
+ *	Subsystem-level @thaw() is executed for all devices after invoking
+ *	subsystem-level @thaw_noirq() for all of them.  It also may be executed
+ *	directly after @freeze() in case of a transition error.
+ *
+ * @thaw_early: Prepare to execute @thaw().  Undo the changes made by the
+ *	preceding @freeze_late().
+ *
+ * @poweroff: Hibernation-specific, executed after saving a hibernation image.
+ *	Analogous to @suspend(), but it need not save the device's settings in
+ *	memory.
+ *	Subsystem-level @poweroff() is executed for all devices after invoking
+ *	subsystem-level @prepare() for all of them.
+ *
+ * @poweroff_late: Continue operations started by @poweroff().  Analogous to
+ *	@suspend_late(), but it need not save the device's settings in memory.
+ *
+ * @restore: Hibernation-specific, executed after restoring the contents of main
+ *	memory from a hibernation image, analogous to @resume().
+ *
+ * @restore_early: Prepare to execute @restore(), analogous to @resume_early().
+ *
+ * @suspend_noirq: Complete the actions started by @suspend().  Carry out any
+ *	additional operations required for suspending the device that might be
+ *	racing with its driver's interrupt handler, which is guaranteed not to
+ *	run while @suspend_noirq() is being executed.
+ *	It generally is expected that the device will be in a low-power state
+ *	(appropriate for the target system sleep state) after subsystem-level
+ *	@suspend_noirq() has returned successfully.  If the device can generate
+ *	system wakeup signals and is enabled to wake up the system, it should be
+ *	configured to do so at that time.  However, depending on the platform
+ *	and device's subsystem, @suspend() or @suspend_late() may be allowed to
+ *	put the device into the low-power state and configure it to generate
+ *	wakeup signals, in which case it generally is not necessary to define
+ *	@suspend_noirq().
+ *
+ * @resume_noirq: Prepare for the execution of @resume() by carrying out any
+ *	operations required for resuming the device that might be racing with
+ *	its driver's interrupt handler, which is guaranteed not to run while
+ *	@resume_noirq() is being executed.
+ *
+ * @freeze_noirq: Complete the actions started by @freeze().  Carry out any
+ *	additional operations required for freezing the device that might be
+ *	racing with its driver's interrupt handler, which is guaranteed not to
+ *	run while @freeze_noirq() is being executed.
+ *	The power state of the device should not be changed by either @freeze(),
+ *	or @freeze_late(), or @freeze_noirq() and it should not be configured to
+ *	signal system wakeup by any of these callbacks.
+ *
+ * @thaw_noirq: Prepare for the execution of @thaw() by carrying out any
+ *	operations required for thawing the device that might be racing with its
+ *	driver's interrupt handler, which is guaranteed not to run while
+ *	@thaw_noirq() is being executed.
+ *
+ * @poweroff_noirq: Complete the actions started by @poweroff().  Analogous to
+ *	@suspend_noirq(), but it need not save the device's settings in memory.
+ *
+ * @restore_noirq: Prepare for the execution of @restore() by carrying out any
+ *	operations required for thawing the device that might be racing with its
+ *	driver's interrupt handler, which is guaranteed not to run while
+ *	@restore_noirq() is being executed.  Analogous to @resume_noirq().
+ *
+ * All of the above callbacks, except for @complete(), return error codes.
+ * However, the error codes returned by the resume operations, @resume(),
+ * @thaw(), @restore(), @resume_noirq(), @thaw_noirq(), and @restore_noirq(), do
+ * not cause the PM core to abort the resume transition during which they are
+ * returned.  The error codes returned in those cases are only printed by the PM
+ * core to the system logs for debugging purposes.  Still, it is recommended
+ * that drivers only return error codes from their resume methods in case of an
+ * unrecoverable failure (i.e. when the device being handled refuses to resume
+ * and becomes unusable) to allow us to modify the PM core in the future, so
+ * that it can avoid attempting to handle devices that failed to resume and
+ * their children.
+ *
+ * It is allowed to unregister devices while the above callbacks are being
+ * executed.  However, a callback routine must NOT try to unregister the device
+ * it was called for, although it may unregister children of that device (for
+ * example, if it detects that a child was unplugged while the system was
+ * asleep).
+ *
+ * Refer to Documentation/power/devices.txt for more information about the role
+ * of the above callbacks in the system suspend process.
+ *
+ * There also are callbacks related to runtime power management of devices.
+ * Again, these callbacks are executed by the PM core only for subsystems
+ * (PM domains, device types, classes and bus types) and the subsystem-level
+ * callbacks are supposed to invoke the driver callbacks.  Moreover, the exact
+ * actions to be performed by a device driver's callbacks generally depend on
+ * the platform and subsystem the device belongs to.
+ *
+ * @runtime_suspend: Prepare the device for a condition in which it won't be
+ *	able to communicate with the CPU(s) and RAM due to power management.
+ *	This need not mean that the device should be put into a low-power state.
+ *	For example, if the device is behind a link which is about to be turned
+ *	off, the device may remain at full power.  If the device does go to low
+ *	power and is capable of generating runtime wakeup events, remote wakeup
+ *	(i.e., a hardware mechanism allowing the device to request a change of
+ *	its power state via an interrupt) should be enabled for it.
+ *
+ * @runtime_resume: Put the device into the fully active state in response to a
+ *	wakeup event generated by hardware or at the request of software.  If
+ *	necessary, put the device into the full-power state and restore its
+ *	registers, so that it is fully operational.
+ *
+ * @runtime_idle: Device appears to be inactive and it might be put into a
+ *	low-power state if all of the necessary conditions are satisfied.  Check
+ *	these conditions and handle the device as appropriate, possibly queueing
+ *	a suspend request for it.  The return value is ignored by the PM core.
+ *
+ * Refer to Documentation/power/runtime_pm.txt for more information about the
+ * role of the above callbacks in device runtime power management.
+ *
+ */
+
+struct dev_pm_ops {
+	int (*prepare)(struct device *dev);
+	void (*complete)(struct device *dev);
+	int (*suspend)(struct device *dev);
+	int (*resume)(struct device *dev);
+	int (*freeze)(struct device *dev);
+	int (*thaw)(struct device *dev);
+	int (*poweroff)(struct device *dev);
+	int (*restore)(struct device *dev);
+	int (*suspend_late)(struct device *dev);
+	int (*resume_early)(struct device *dev);
+	int (*freeze_late)(struct device *dev);
+	int (*thaw_early)(struct device *dev);
+	int (*poweroff_late)(struct device *dev);
+	int (*restore_early)(struct device *dev);
+	int (*suspend_noirq)(struct device *dev);
+	int (*resume_noirq)(struct device *dev);
+	int (*freeze_noirq)(struct device *dev);
+	int (*thaw_noirq)(struct device *dev);
+	int (*poweroff_noirq)(struct device *dev);
+	int (*restore_noirq)(struct device *dev);
+	int (*runtime_suspend)(struct device *dev);
+	int (*runtime_resume)(struct device *dev);
+	int (*runtime_idle)(struct device *dev);
+};
+
+#ifdef CONFIG_PM_SLEEP
+#define SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
+	.suspend = suspend_fn, \
+	.resume = resume_fn, \
+	.freeze = suspend_fn, \
+	.thaw = resume_fn, \
+	.poweroff = suspend_fn, \
+	.restore = resume_fn,
+#else
+#define SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
+#endif
+
+#ifdef CONFIG_PM_RUNTIME
+#define SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \
+	.runtime_suspend = suspend_fn, \
+	.runtime_resume = resume_fn, \
+	.runtime_idle = idle_fn,
+#else
+#define SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn)
+#endif
+
+/*
+ * Use this if you want to use the same suspend and resume callbacks for suspend
+ * to RAM and hibernation.
+ */
+#define SIMPLE_DEV_PM_OPS(name, suspend_fn, resume_fn) \
+const struct dev_pm_ops name = { \
+	SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
+}
+
+/*
+ * Use this for defining a set of PM operations to be used in all situations
+ * (sustem suspend, hibernation or runtime PM).
+ * NOTE: In general, system suspend callbacks, .suspend() and .resume(), should
+ * be different from the corresponding runtime PM callbacks, .runtime_suspend(),
+ * and .runtime_resume(), because .runtime_suspend() always works on an already
+ * quiescent device, while .suspend() should assume that the device may be doing
+ * something when it is called (it should ensure that the device will be
+ * quiescent after it has returned).  Therefore it's better to point the "late"
+ * suspend and "early" resume callback pointers, .suspend_late() and
+ * .resume_early(), to the same routines as .runtime_suspend() and
+ * .runtime_resume(), respectively (and analogously for hibernation).
+ */
+#define UNIVERSAL_DEV_PM_OPS(name, suspend_fn, resume_fn, idle_fn) \
+const struct dev_pm_ops name = { \
+	SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
+	SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \
+}
+
+/**
+ * PM_EVENT_ messages
+ *
+ * The following PM_EVENT_ messages are defined for the internal use of the PM
+ * core, in order to provide a mechanism allowing the high level suspend and
+ * hibernation code to convey the necessary information to the device PM core
+ * code:
+ *
+ * ON		No transition.
+ *
+ * FREEZE 	System is going to hibernate, call ->prepare() and ->freeze()
+ *		for all devices.
+ *
+ * SUSPEND	System is going to suspend, call ->prepare() and ->suspend()
+ *		for all devices.
+ *
+ * HIBERNATE	Hibernation image has been saved, call ->prepare() and
+ *		->poweroff() for all devices.
+ *
+ * QUIESCE	Contents of main memory are going to be restored from a (loaded)
+ *		hibernation image, call ->prepare() and ->freeze() for all
+ *		devices.
+ *
+ * RESUME	System is resuming, call ->resume() and ->complete() for all
+ *		devices.
+ *
+ * THAW		Hibernation image has been created, call ->thaw() and
+ *		->complete() for all devices.
+ *
+ * RESTORE	Contents of main memory have been restored from a hibernation
+ *		image, call ->restore() and ->complete() for all devices.
+ *
+ * RECOVER	Creation of a hibernation image or restoration of the main
+ *		memory contents from a hibernation image has failed, call
+ *		->thaw() and ->complete() for all devices.
+ *
+ * The following PM_EVENT_ messages are defined for internal use by
+ * kernel subsystems.  They are never issued by the PM core.
+ *
+ * USER_SUSPEND		Manual selective suspend was issued by userspace.
+ *
+ * USER_RESUME		Manual selective resume was issued by userspace.
+ *
+ * REMOTE_WAKEUP	Remote-wakeup request was received from the device.
+ *
+ * AUTO_SUSPEND		Automatic (device idle) runtime suspend was
+ *			initiated by the subsystem.
+ *
+ * AUTO_RESUME		Automatic (device needed) runtime resume was
+ *			requested by a driver.
+ */
+
+#define PM_EVENT_INVALID	(-1)
+#define PM_EVENT_ON		0x0000
+#define PM_EVENT_FREEZE 	0x0001
+#define PM_EVENT_SUSPEND	0x0002
+#define PM_EVENT_HIBERNATE	0x0004
+#define PM_EVENT_QUIESCE	0x0008
+#define PM_EVENT_RESUME		0x0010
+#define PM_EVENT_THAW		0x0020
+#define PM_EVENT_RESTORE	0x0040
+#define PM_EVENT_RECOVER	0x0080
+#define PM_EVENT_USER		0x0100
+#define PM_EVENT_REMOTE		0x0200
+#define PM_EVENT_AUTO		0x0400
+
+#define PM_EVENT_SLEEP		(PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE)
+#define PM_EVENT_USER_SUSPEND	(PM_EVENT_USER | PM_EVENT_SUSPEND)
+#define PM_EVENT_USER_RESUME	(PM_EVENT_USER | PM_EVENT_RESUME)
+#define PM_EVENT_REMOTE_RESUME	(PM_EVENT_REMOTE | PM_EVENT_RESUME)
+#define PM_EVENT_AUTO_SUSPEND	(PM_EVENT_AUTO | PM_EVENT_SUSPEND)
+#define PM_EVENT_AUTO_RESUME	(PM_EVENT_AUTO | PM_EVENT_RESUME)
+
+#define PMSG_INVALID	((struct pm_message){ .event = PM_EVENT_INVALID, })
+#define PMSG_ON		((struct pm_message){ .event = PM_EVENT_ON, })
+#define PMSG_FREEZE	((struct pm_message){ .event = PM_EVENT_FREEZE, })
+#define PMSG_QUIESCE	((struct pm_message){ .event = PM_EVENT_QUIESCE, })
+#define PMSG_SUSPEND	((struct pm_message){ .event = PM_EVENT_SUSPEND, })
+#define PMSG_HIBERNATE	((struct pm_message){ .event = PM_EVENT_HIBERNATE, })
+#define PMSG_RESUME	((struct pm_message){ .event = PM_EVENT_RESUME, })
+#define PMSG_THAW	((struct pm_message){ .event = PM_EVENT_THAW, })
+#define PMSG_RESTORE	((struct pm_message){ .event = PM_EVENT_RESTORE, })
+#define PMSG_RECOVER	((struct pm_message){ .event = PM_EVENT_RECOVER, })
+#define PMSG_USER_SUSPEND	((struct pm_message) \
+					{ .event = PM_EVENT_USER_SUSPEND, })
+#define PMSG_USER_RESUME	((struct pm_message) \
+					{ .event = PM_EVENT_USER_RESUME, })
+#define PMSG_REMOTE_RESUME	((struct pm_message) \
+					{ .event = PM_EVENT_REMOTE_RESUME, })
+#define PMSG_AUTO_SUSPEND	((struct pm_message) \
+					{ .event = PM_EVENT_AUTO_SUSPEND, })
+#define PMSG_AUTO_RESUME	((struct pm_message) \
+					{ .event = PM_EVENT_AUTO_RESUME, })
+
+#define PMSG_IS_AUTO(msg)	(((msg).event & PM_EVENT_AUTO) != 0)
+
+/**
+ * Device run-time power management status.
+ *
+ * These status labels are used internally by the PM core to indicate the
+ * current status of a device with respect to the PM core operations.  They do
+ * not reflect the actual power state of the device or its status as seen by the
+ * driver.
+ *
+ * RPM_ACTIVE		Device is fully operational.  Indicates that the device
+ *			bus type's ->runtime_resume() callback has completed
+ *			successfully.
+ *
+ * RPM_SUSPENDED	Device bus type's ->runtime_suspend() callback has
+ *			completed successfully.  The device is regarded as
+ *			suspended.
+ *
+ * RPM_RESUMING		Device bus type's ->runtime_resume() callback is being
+ *			executed.
+ *
+ * RPM_SUSPENDING	Device bus type's ->runtime_suspend() callback is being
+ *			executed.
+ */
+
+enum rpm_status {
+	RPM_ACTIVE = 0,
+	RPM_RESUMING,
+	RPM_SUSPENDED,
+	RPM_SUSPENDING,
+};
+
+/**
+ * Device run-time power management request types.
+ *
+ * RPM_REQ_NONE		Do nothing.
+ *
+ * RPM_REQ_IDLE		Run the device bus type's ->runtime_idle() callback
+ *
+ * RPM_REQ_SUSPEND	Run the device bus type's ->runtime_suspend() callback
+ *
+ * RPM_REQ_AUTOSUSPEND	Same as RPM_REQ_SUSPEND, but not until the device has
+ *			been inactive for as long as power.autosuspend_delay
+ *
+ * RPM_REQ_RESUME	Run the device bus type's ->runtime_resume() callback
+ */
+
+enum rpm_request {
+	RPM_REQ_NONE = 0,
+	RPM_REQ_IDLE,
+	RPM_REQ_SUSPEND,
+	RPM_REQ_AUTOSUSPEND,
+	RPM_REQ_RESUME,
+};
+
+struct wakeup_source;
+
+struct pm_domain_data {
+	struct list_head list_node;
+	struct device *dev;
+};
+
+struct pm_subsys_data {
+	spinlock_t lock;
+	unsigned int refcount;
+#ifdef CONFIG_PM_CLK
+	struct list_head clock_list;
+#endif
+#ifdef CONFIG_PM_GENERIC_DOMAINS
+	struct pm_domain_data *domain_data;
+#endif
+};
+
+struct dev_pm_info {
+	pm_message_t		power_state;
+	unsigned int		can_wakeup:1;
+	unsigned int		async_suspend:1;
+	bool			is_prepared:1;	/* Owned by the PM core */
+	bool			is_suspended:1;	/* Ditto */
+	bool			ignore_children:1;
+	spinlock_t		lock;
+#ifdef CONFIG_PM_SLEEP
+	struct list_head	entry;
+	struct completion	completion;
+	struct wakeup_source	*wakeup;
+	bool			wakeup_path:1;
+#else
+	unsigned int		should_wakeup:1;
+#endif
+#ifdef CONFIG_PM_RUNTIME
+	struct timer_list	suspend_timer;
+	unsigned long		timer_expires;
+	struct work_struct	work;
+	wait_queue_head_t	wait_queue;
+	atomic_t		usage_count;
+	atomic_t		child_count;
+	unsigned int		disable_depth:3;
+	unsigned int		idle_notification:1;
+	unsigned int		request_pending:1;
+	unsigned int		deferred_resume:1;
+	unsigned int		run_wake:1;
+	unsigned int		runtime_auto:1;
+	unsigned int		no_callbacks:1;
+	unsigned int		irq_safe:1;
+	unsigned int		use_autosuspend:1;
+	unsigned int		timer_autosuspends:1;
+	enum rpm_request	request;
+	enum rpm_status		runtime_status;
+	int			runtime_error;
+	int			autosuspend_delay;
+	unsigned long		last_busy;
+	unsigned long		active_jiffies;
+	unsigned long		suspended_jiffies;
+	unsigned long		accounting_timestamp;
+	struct dev_pm_qos_request *pq_req;
+#endif
+	struct pm_subsys_data	*subsys_data;  /* Owned by the subsystem. */
+	struct pm_qos_constraints *constraints;
+};
+
+extern void update_pm_runtime_accounting(struct device *dev);
+extern int dev_pm_get_subsys_data(struct device *dev);
+extern int dev_pm_put_subsys_data(struct device *dev);
+
+/*
+ * Power domains provide callbacks that are executed during system suspend,
+ * hibernation, system resume and during runtime PM transitions along with
+ * subsystem-level and driver-level callbacks.
+ */
+struct dev_pm_domain {
+	struct dev_pm_ops	ops;
+};
+
+/*
+ * The PM_EVENT_ messages are also used by drivers implementing the legacy
+ * suspend framework, based on the ->suspend() and ->resume() callbacks common
+ * for suspend and hibernation transitions, according to the rules below.
+ */
+
+/* Necessary, because several drivers use PM_EVENT_PRETHAW */
+#define PM_EVENT_PRETHAW PM_EVENT_QUIESCE
+
+/*
+ * One transition is triggered by resume(), after a suspend() call; the
+ * message is implicit:
+ *
+ * ON		Driver starts working again, responding to hardware events
+ * 		and software requests.  The hardware may have gone through
+ * 		a power-off reset, or it may have maintained state from the
+ * 		previous suspend() which the driver will rely on while
+ * 		resuming.  On most platforms, there are no restrictions on
+ * 		availability of resources like clocks during resume().
+ *
+ * Other transitions are triggered by messages sent using suspend().  All
+ * these transitions quiesce the driver, so that I/O queues are inactive.
+ * That commonly entails turning off IRQs and DMA; there may be rules
+ * about how to quiesce that are specific to the bus or the device's type.
+ * (For example, network drivers mark the link state.)  Other details may
+ * differ according to the message:
+ *
+ * SUSPEND	Quiesce, enter a low power device state appropriate for
+ * 		the upcoming system state (such as PCI_D3hot), and enable
+ * 		wakeup events as appropriate.
+ *
+ * HIBERNATE	Enter a low power device state appropriate for the hibernation
+ * 		state (eg. ACPI S4) and enable wakeup events as appropriate.
+ *
+ * FREEZE	Quiesce operations so that a consistent image can be saved;
+ * 		but do NOT otherwise enter a low power device state, and do
+ * 		NOT emit system wakeup events.
+ *
+ * PRETHAW	Quiesce as if for FREEZE; additionally, prepare for restoring
+ * 		the system from a snapshot taken after an earlier FREEZE.
+ * 		Some drivers will need to reset their hardware state instead
+ * 		of preserving it, to ensure that it's never mistaken for the
+ * 		state which that earlier snapshot had set up.
+ *
+ * A minimally power-aware driver treats all messages as SUSPEND, fully
+ * reinitializes its device during resume() -- whether or not it was reset
+ * during the suspend/resume cycle -- and can't issue wakeup events.
+ *
+ * More power-aware drivers may also use low power states at runtime as
+ * well as during system sleep states like PM_SUSPEND_STANDBY.  They may
+ * be able to use wakeup events to exit from runtime low-power states,
+ * or from system low-power states such as standby or suspend-to-RAM.
+ */
+
+#ifdef CONFIG_PM_SLEEP
+extern void device_pm_lock(void);
+extern void dpm_resume_start(pm_message_t state);
+extern void dpm_resume_end(pm_message_t state);
+extern void dpm_resume(pm_message_t state);
+extern void dpm_complete(pm_message_t state);
+
+extern void device_pm_unlock(void);
+extern int dpm_suspend_end(pm_message_t state);
+extern int dpm_suspend_start(pm_message_t state);
+extern int dpm_suspend(pm_message_t state);
+extern int dpm_prepare(pm_message_t state);
+
+extern void __suspend_report_result(const char *function, void *fn, int ret);
+
+#define suspend_report_result(fn, ret)					\
+	do {								\
+		__suspend_report_result(__func__, fn, ret);		\
+	} while (0)
+
+extern int device_pm_wait_for_dev(struct device *sub, struct device *dev);
+
+extern int pm_generic_prepare(struct device *dev);
+extern int pm_generic_suspend_late(struct device *dev);
+extern int pm_generic_suspend_noirq(struct device *dev);
+extern int pm_generic_suspend(struct device *dev);
+extern int pm_generic_resume_early(struct device *dev);
+extern int pm_generic_resume_noirq(struct device *dev);
+extern int pm_generic_resume(struct device *dev);
+extern int pm_generic_freeze_noirq(struct device *dev);
+extern int pm_generic_freeze_late(struct device *dev);
+extern int pm_generic_freeze(struct device *dev);
+extern int pm_generic_thaw_noirq(struct device *dev);
+extern int pm_generic_thaw_early(struct device *dev);
+extern int pm_generic_thaw(struct device *dev);
+extern int pm_generic_restore_noirq(struct device *dev);
+extern int pm_generic_restore_early(struct device *dev);
+extern int pm_generic_restore(struct device *dev);
+extern int pm_generic_poweroff_noirq(struct device *dev);
+extern int pm_generic_poweroff_late(struct device *dev);
+extern int pm_generic_poweroff(struct device *dev);
+extern void pm_generic_complete(struct device *dev);
+
+#else /* !CONFIG_PM_SLEEP */
+
+#define device_pm_lock() do {} while (0)
+#define device_pm_unlock() do {} while (0)
+
+static inline int dpm_suspend_start(pm_message_t state)
+{
+	return 0;
+}
+
+#define suspend_report_result(fn, ret)		do {} while (0)
+
+static inline int device_pm_wait_for_dev(struct device *a, struct device *b)
+{
+	return 0;
+}
+
+#define pm_generic_prepare	NULL
+#define pm_generic_suspend	NULL
+#define pm_generic_resume	NULL
+#define pm_generic_freeze	NULL
+#define pm_generic_thaw		NULL
+#define pm_generic_restore	NULL
+#define pm_generic_poweroff	NULL
+#define pm_generic_complete	NULL
+#endif /* !CONFIG_PM_SLEEP */
+
+/* How to reorder dpm_list after device_move() */
+enum dpm_order {
+	DPM_ORDER_NONE,
+	DPM_ORDER_DEV_AFTER_PARENT,
+	DPM_ORDER_PARENT_BEFORE_DEV,
+	DPM_ORDER_DEV_LAST,
+};
+
+#endif /* _LINUX_PM_H */
diff --git a/include/linux/pm_clock.h b/include/linux/pm_clock.h
new file mode 100644
index 00000000..8348866e
--- /dev/null
+++ b/include/linux/pm_clock.h
@@ -0,0 +1,71 @@
+/*
+ * pm_clock.h - Definitions and headers related to device clocks.
+ *
+ * Copyright (C) 2011 Rafael J. Wysocki <rjw@sisk.pl>, Renesas Electronics Corp.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#ifndef _LINUX_PM_CLOCK_H
+#define _LINUX_PM_CLOCK_H
+
+#include <linux/device.h>
+#include <linux/notifier.h>
+
+struct pm_clk_notifier_block {
+	struct notifier_block nb;
+	struct dev_pm_domain *pm_domain;
+	char *con_ids[];
+};
+
+#ifdef CONFIG_PM_CLK
+static inline bool pm_clk_no_clocks(struct device *dev)
+{
+	return dev && dev->power.subsys_data
+		&& list_empty(&dev->power.subsys_data->clock_list);
+}
+
+extern void pm_clk_init(struct device *dev);
+extern int pm_clk_create(struct device *dev);
+extern void pm_clk_destroy(struct device *dev);
+extern int pm_clk_add(struct device *dev, const char *con_id);
+extern void pm_clk_remove(struct device *dev, const char *con_id);
+extern int pm_clk_suspend(struct device *dev);
+extern int pm_clk_resume(struct device *dev);
+#else
+static inline bool pm_clk_no_clocks(struct device *dev)
+{
+	return true;
+}
+static inline void pm_clk_init(struct device *dev)
+{
+}
+static inline int pm_clk_create(struct device *dev)
+{
+	return -EINVAL;
+}
+static inline void pm_clk_destroy(struct device *dev)
+{
+}
+static inline int pm_clk_add(struct device *dev, const char *con_id)
+{
+	return -EINVAL;
+}
+static inline void pm_clk_remove(struct device *dev, const char *con_id)
+{
+}
+#define pm_clk_suspend	NULL
+#define pm_clk_resume	NULL
+#endif
+
+#ifdef CONFIG_HAVE_CLK
+extern void pm_clk_add_notifier(struct bus_type *bus,
+					struct pm_clk_notifier_block *clknb);
+#else
+static inline void pm_clk_add_notifier(struct bus_type *bus,
+					struct pm_clk_notifier_block *clknb)
+{
+}
+#endif
+
+#endif
diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
new file mode 100644
index 00000000..30f794eb
--- /dev/null
+++ b/include/linux/pm_domain.h
@@ -0,0 +1,243 @@
+/*
+ * pm_domain.h - Definitions and headers related to device power domains.
+ *
+ * Copyright (C) 2011 Rafael J. Wysocki <rjw@sisk.pl>, Renesas Electronics Corp.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#ifndef _LINUX_PM_DOMAIN_H
+#define _LINUX_PM_DOMAIN_H
+
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/pm.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/notifier.h>
+
+enum gpd_status {
+	GPD_STATE_ACTIVE = 0,	/* PM domain is active */
+	GPD_STATE_WAIT_MASTER,	/* PM domain's master is being waited for */
+	GPD_STATE_BUSY,		/* Something is happening to the PM domain */
+	GPD_STATE_REPEAT,	/* Power off in progress, to be repeated */
+	GPD_STATE_POWER_OFF,	/* PM domain is off */
+};
+
+struct dev_power_governor {
+	bool (*power_down_ok)(struct dev_pm_domain *domain);
+	bool (*stop_ok)(struct device *dev);
+};
+
+struct gpd_dev_ops {
+	int (*start)(struct device *dev);
+	int (*stop)(struct device *dev);
+	int (*save_state)(struct device *dev);
+	int (*restore_state)(struct device *dev);
+	int (*suspend)(struct device *dev);
+	int (*suspend_late)(struct device *dev);
+	int (*resume_early)(struct device *dev);
+	int (*resume)(struct device *dev);
+	int (*freeze)(struct device *dev);
+	int (*freeze_late)(struct device *dev);
+	int (*thaw_early)(struct device *dev);
+	int (*thaw)(struct device *dev);
+	bool (*active_wakeup)(struct device *dev);
+};
+
+struct generic_pm_domain {
+	struct dev_pm_domain domain;	/* PM domain operations */
+	struct list_head gpd_list_node;	/* Node in the global PM domains list */
+	struct list_head master_links;	/* Links with PM domain as a master */
+	struct list_head slave_links;	/* Links with PM domain as a slave */
+	struct list_head dev_list;	/* List of devices */
+	struct mutex lock;
+	struct dev_power_governor *gov;
+	struct work_struct power_off_work;
+	char *name;
+	unsigned int in_progress;	/* Number of devices being suspended now */
+	atomic_t sd_count;	/* Number of subdomains with power "on" */
+	enum gpd_status status;	/* Current state of the domain */
+	wait_queue_head_t status_wait_queue;
+	struct task_struct *poweroff_task;	/* Powering off task */
+	unsigned int resume_count;	/* Number of devices being resumed */
+	unsigned int device_count;	/* Number of devices */
+	unsigned int suspended_count;	/* System suspend device counter */
+	unsigned int prepared_count;	/* Suspend counter of prepared devices */
+	bool suspend_power_off;	/* Power status before system suspend */
+	bool dev_irq_safe;	/* Device callbacks are IRQ-safe */
+	int (*power_off)(struct generic_pm_domain *domain);
+	s64 power_off_latency_ns;
+	int (*power_on)(struct generic_pm_domain *domain);
+	s64 power_on_latency_ns;
+	struct gpd_dev_ops dev_ops;
+	s64 max_off_time_ns;	/* Maximum allowed "suspended" time. */
+	bool max_off_time_changed;
+	bool cached_power_down_ok;
+	struct device_node *of_node; /* Node in device tree */
+};
+
+static inline struct generic_pm_domain *pd_to_genpd(struct dev_pm_domain *pd)
+{
+	return container_of(pd, struct generic_pm_domain, domain);
+}
+
+struct gpd_link {
+	struct generic_pm_domain *master;
+	struct list_head master_node;
+	struct generic_pm_domain *slave;
+	struct list_head slave_node;
+};
+
+struct gpd_timing_data {
+	s64 stop_latency_ns;
+	s64 start_latency_ns;
+	s64 save_state_latency_ns;
+	s64 restore_state_latency_ns;
+	s64 effective_constraint_ns;
+	bool constraint_changed;
+	bool cached_stop_ok;
+};
+
+struct generic_pm_domain_data {
+	struct pm_domain_data base;
+	struct gpd_dev_ops ops;
+	struct gpd_timing_data td;
+	struct notifier_block nb;
+	struct mutex lock;
+	bool need_restore;
+	bool always_on;
+};
+
+#ifdef CONFIG_PM_GENERIC_DOMAINS
+static inline struct generic_pm_domain_data *to_gpd_data(struct pm_domain_data *pdd)
+{
+	return container_of(pdd, struct generic_pm_domain_data, base);
+}
+
+static inline struct generic_pm_domain_data *dev_gpd_data(struct device *dev)
+{
+	return to_gpd_data(dev->power.subsys_data->domain_data);
+}
+
+extern struct dev_power_governor simple_qos_governor;
+
+extern struct generic_pm_domain *dev_to_genpd(struct device *dev);
+extern int __pm_genpd_add_device(struct generic_pm_domain *genpd,
+				 struct device *dev,
+				 struct gpd_timing_data *td);
+
+extern int __pm_genpd_of_add_device(struct device_node *genpd_node,
+				    struct device *dev,
+				    struct gpd_timing_data *td);
+
+static inline int pm_genpd_add_device(struct generic_pm_domain *genpd,
+				      struct device *dev)
+{
+	return __pm_genpd_add_device(genpd, dev, NULL);
+}
+
+static inline int pm_genpd_of_add_device(struct device_node *genpd_node,
+					 struct device *dev)
+{
+	return __pm_genpd_of_add_device(genpd_node, dev, NULL);
+}
+
+extern int pm_genpd_remove_device(struct generic_pm_domain *genpd,
+				  struct device *dev);
+extern void pm_genpd_dev_always_on(struct device *dev, bool val);
+extern void pm_genpd_dev_need_restore(struct device *dev, bool val);
+extern int pm_genpd_add_subdomain(struct generic_pm_domain *genpd,
+				  struct generic_pm_domain *new_subdomain);
+extern int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd,
+				     struct generic_pm_domain *target);
+extern int pm_genpd_add_callbacks(struct device *dev,
+				  struct gpd_dev_ops *ops,
+				  struct gpd_timing_data *td);
+extern int __pm_genpd_remove_callbacks(struct device *dev, bool clear_td);
+extern void pm_genpd_init(struct generic_pm_domain *genpd,
+			  struct dev_power_governor *gov, bool is_off);
+
+extern int pm_genpd_poweron(struct generic_pm_domain *genpd);
+
+extern bool default_stop_ok(struct device *dev);
+
+extern struct dev_power_governor pm_domain_always_on_gov;
+#else
+
+static inline struct generic_pm_domain_data *dev_gpd_data(struct device *dev)
+{
+	return ERR_PTR(-ENOSYS);
+}
+static inline struct generic_pm_domain *dev_to_genpd(struct device *dev)
+{
+	return ERR_PTR(-ENOSYS);
+}
+static inline int __pm_genpd_add_device(struct generic_pm_domain *genpd,
+					struct device *dev,
+					struct gpd_timing_data *td)
+{
+	return -ENOSYS;
+}
+static inline int pm_genpd_add_device(struct generic_pm_domain *genpd,
+				      struct device *dev)
+{
+	return -ENOSYS;
+}
+static inline int pm_genpd_remove_device(struct generic_pm_domain *genpd,
+					 struct device *dev)
+{
+	return -ENOSYS;
+}
+static inline void pm_genpd_dev_always_on(struct device *dev, bool val) {}
+static inline void pm_genpd_dev_need_restore(struct device *dev, bool val) {}
+static inline int pm_genpd_add_subdomain(struct generic_pm_domain *genpd,
+					 struct generic_pm_domain *new_sd)
+{
+	return -ENOSYS;
+}
+static inline int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd,
+					    struct generic_pm_domain *target)
+{
+	return -ENOSYS;
+}
+static inline int pm_genpd_add_callbacks(struct device *dev,
+					 struct gpd_dev_ops *ops,
+					 struct gpd_timing_data *td)
+{
+	return -ENOSYS;
+}
+static inline int __pm_genpd_remove_callbacks(struct device *dev, bool clear_td)
+{
+	return -ENOSYS;
+}
+static inline void pm_genpd_init(struct generic_pm_domain *genpd,
+				 struct dev_power_governor *gov, bool is_off)
+{
+}
+static inline int pm_genpd_poweron(struct generic_pm_domain *genpd)
+{
+	return -ENOSYS;
+}
+static inline bool default_stop_ok(struct device *dev)
+{
+	return false;
+}
+#define simple_qos_governor NULL
+#define pm_domain_always_on_gov NULL
+#endif
+
+static inline int pm_genpd_remove_callbacks(struct device *dev)
+{
+	return __pm_genpd_remove_callbacks(dev, true);
+}
+
+#ifdef CONFIG_PM_GENERIC_DOMAINS_RUNTIME
+extern void genpd_queue_power_off_work(struct generic_pm_domain *genpd);
+extern void pm_genpd_poweroff_unused(void);
+#else
+static inline void genpd_queue_power_off_work(struct generic_pm_domain *gpd) {}
+static inline void pm_genpd_poweroff_unused(void) {}
+#endif
+
+#endif /* _LINUX_PM_DOMAIN_H */
diff --git a/include/linux/pm_qos.h b/include/linux/pm_qos.h
new file mode 100644
index 00000000..233149cb
--- /dev/null
+++ b/include/linux/pm_qos.h
@@ -0,0 +1,153 @@
+#ifndef _LINUX_PM_QOS_H
+#define _LINUX_PM_QOS_H
+/* interface for the pm_qos_power infrastructure of the linux kernel.
+ *
+ * Mark Gross <mgross@linux.intel.com>
+ */
+#include <linux/plist.h>
+#include <linux/notifier.h>
+#include <linux/miscdevice.h>
+#include <linux/device.h>
+#include <linux/workqueue.h>
+
+enum {
+	PM_QOS_RESERVED = 0,
+	PM_QOS_CPU_DMA_LATENCY,
+	PM_QOS_NETWORK_LATENCY,
+	PM_QOS_NETWORK_THROUGHPUT,
+
+	/* insert new class ID */
+	PM_QOS_NUM_CLASSES,
+};
+
+#define PM_QOS_DEFAULT_VALUE -1
+
+#define PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE	(2000 * USEC_PER_SEC)
+#define PM_QOS_NETWORK_LAT_DEFAULT_VALUE	(2000 * USEC_PER_SEC)
+#define PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE	0
+#define PM_QOS_DEV_LAT_DEFAULT_VALUE		0
+
+struct pm_qos_request {
+	struct plist_node node;
+	int pm_qos_class;
+	struct delayed_work work; /* for pm_qos_update_request_timeout */
+};
+
+struct dev_pm_qos_request {
+	struct plist_node node;
+	struct device *dev;
+};
+
+enum pm_qos_type {
+	PM_QOS_UNITIALIZED,
+	PM_QOS_MAX,		/* return the largest value */
+	PM_QOS_MIN		/* return the smallest value */
+};
+
+/*
+ * Note: The lockless read path depends on the CPU accessing
+ * target_value atomically.  Atomic access is only guaranteed on all CPU
+ * types linux supports for 32 bit quantites
+ */
+struct pm_qos_constraints {
+	struct plist_head list;
+	s32 target_value;	/* Do not change to 64 bit */
+	s32 default_value;
+	enum pm_qos_type type;
+	struct blocking_notifier_head *notifiers;
+};
+
+/* Action requested to pm_qos_update_target */
+enum pm_qos_req_action {
+	PM_QOS_ADD_REQ,		/* Add a new request */
+	PM_QOS_UPDATE_REQ,	/* Update an existing request */
+	PM_QOS_REMOVE_REQ	/* Remove an existing request */
+};
+
+static inline int dev_pm_qos_request_active(struct dev_pm_qos_request *req)
+{
+	return req->dev != 0;
+}
+
+int pm_qos_update_target(struct pm_qos_constraints *c, struct plist_node *node,
+			 enum pm_qos_req_action action, int value);
+void pm_qos_add_request(struct pm_qos_request *req, int pm_qos_class,
+			s32 value);
+void pm_qos_update_request(struct pm_qos_request *req,
+			   s32 new_value);
+void pm_qos_update_request_timeout(struct pm_qos_request *req,
+				   s32 new_value, unsigned long timeout_us);
+void pm_qos_remove_request(struct pm_qos_request *req);
+
+int pm_qos_request(int pm_qos_class);
+int pm_qos_add_notifier(int pm_qos_class, struct notifier_block *notifier);
+int pm_qos_remove_notifier(int pm_qos_class, struct notifier_block *notifier);
+int pm_qos_request_active(struct pm_qos_request *req);
+s32 pm_qos_read_value(struct pm_qos_constraints *c);
+
+#ifdef CONFIG_PM
+s32 __dev_pm_qos_read_value(struct device *dev);
+s32 dev_pm_qos_read_value(struct device *dev);
+int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req,
+			   s32 value);
+int dev_pm_qos_update_request(struct dev_pm_qos_request *req, s32 new_value);
+int dev_pm_qos_remove_request(struct dev_pm_qos_request *req);
+int dev_pm_qos_add_notifier(struct device *dev,
+			    struct notifier_block *notifier);
+int dev_pm_qos_remove_notifier(struct device *dev,
+			       struct notifier_block *notifier);
+int dev_pm_qos_add_global_notifier(struct notifier_block *notifier);
+int dev_pm_qos_remove_global_notifier(struct notifier_block *notifier);
+void dev_pm_qos_constraints_init(struct device *dev);
+void dev_pm_qos_constraints_destroy(struct device *dev);
+int dev_pm_qos_add_ancestor_request(struct device *dev,
+				    struct dev_pm_qos_request *req, s32 value);
+#else
+static inline s32 __dev_pm_qos_read_value(struct device *dev)
+			{ return 0; }
+static inline s32 dev_pm_qos_read_value(struct device *dev)
+			{ return 0; }
+static inline int dev_pm_qos_add_request(struct device *dev,
+					 struct dev_pm_qos_request *req,
+					 s32 value)
+			{ return 0; }
+static inline int dev_pm_qos_update_request(struct dev_pm_qos_request *req,
+					    s32 new_value)
+			{ return 0; }
+static inline int dev_pm_qos_remove_request(struct dev_pm_qos_request *req)
+			{ return 0; }
+static inline int dev_pm_qos_add_notifier(struct device *dev,
+					  struct notifier_block *notifier)
+			{ return 0; }
+static inline int dev_pm_qos_remove_notifier(struct device *dev,
+					     struct notifier_block *notifier)
+			{ return 0; }
+static inline int dev_pm_qos_add_global_notifier(
+					struct notifier_block *notifier)
+			{ return 0; }
+static inline int dev_pm_qos_remove_global_notifier(
+					struct notifier_block *notifier)
+			{ return 0; }
+static inline void dev_pm_qos_constraints_init(struct device *dev)
+{
+	dev->power.power_state = PMSG_ON;
+}
+static inline void dev_pm_qos_constraints_destroy(struct device *dev)
+{
+	dev->power.power_state = PMSG_INVALID;
+}
+static inline int dev_pm_qos_add_ancestor_request(struct device *dev,
+				    struct dev_pm_qos_request *req, s32 value)
+			{ return 0; }
+#endif
+
+#ifdef CONFIG_PM_RUNTIME
+int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value);
+void dev_pm_qos_hide_latency_limit(struct device *dev);
+#else
+static inline int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value)
+			{ return 0; }
+static inline void dev_pm_qos_hide_latency_limit(struct device *dev) {}
+#endif
+
+#endif
diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h
new file mode 100644
index 00000000..f271860c
--- /dev/null
+++ b/include/linux/pm_runtime.h
@@ -0,0 +1,251 @@
+/*
+ * pm_runtime.h - Device run-time power management helper functions.
+ *
+ * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>
+ *
+ * This file is released under the GPLv2.
+ */
+
+#ifndef _LINUX_PM_RUNTIME_H
+#define _LINUX_PM_RUNTIME_H
+
+#include <linux/device.h>
+#include <linux/notifier.h>
+#include <linux/pm.h>
+
+#include <linux/jiffies.h>
+
+/* Runtime PM flag argument bits */
+#define RPM_ASYNC		0x01	/* Request is asynchronous */
+#define RPM_NOWAIT		0x02	/* Don't wait for concurrent
+					    state change */
+#define RPM_GET_PUT		0x04	/* Increment/decrement the
+					    usage_count */
+#define RPM_AUTO		0x08	/* Use autosuspend_delay */
+
+#ifdef CONFIG_PM_RUNTIME
+
+extern struct workqueue_struct *pm_wq;
+
+extern int __pm_runtime_idle(struct device *dev, int rpmflags);
+extern int __pm_runtime_suspend(struct device *dev, int rpmflags);
+extern int __pm_runtime_resume(struct device *dev, int rpmflags);
+extern int pm_schedule_suspend(struct device *dev, unsigned int delay);
+extern int __pm_runtime_set_status(struct device *dev, unsigned int status);
+extern int pm_runtime_barrier(struct device *dev);
+extern void pm_runtime_enable(struct device *dev);
+extern void __pm_runtime_disable(struct device *dev, bool check_resume);
+extern void pm_runtime_allow(struct device *dev);
+extern void pm_runtime_forbid(struct device *dev);
+extern int pm_generic_runtime_idle(struct device *dev);
+extern int pm_generic_runtime_suspend(struct device *dev);
+extern int pm_generic_runtime_resume(struct device *dev);
+extern void pm_runtime_no_callbacks(struct device *dev);
+extern void pm_runtime_irq_safe(struct device *dev);
+extern void __pm_runtime_use_autosuspend(struct device *dev, bool use);
+extern void pm_runtime_set_autosuspend_delay(struct device *dev, int delay);
+extern unsigned long pm_runtime_autosuspend_expiration(struct device *dev);
+extern void pm_runtime_update_max_time_suspended(struct device *dev,
+						 s64 delta_ns);
+
+static inline bool pm_children_suspended(struct device *dev)
+{
+	return dev->power.ignore_children
+		|| !atomic_read(&dev->power.child_count);
+}
+
+static inline void pm_runtime_get_noresume(struct device *dev)
+{
+	atomic_inc(&dev->power.usage_count);
+}
+
+static inline void pm_runtime_put_noidle(struct device *dev)
+{
+	atomic_add_unless(&dev->power.usage_count, -1, 0);
+}
+
+static inline bool device_run_wake(struct device *dev)
+{
+	return dev->power.run_wake;
+}
+
+static inline void device_set_run_wake(struct device *dev, bool enable)
+{
+	dev->power.run_wake = enable;
+}
+
+static inline bool pm_runtime_suspended(struct device *dev)
+{
+	return dev->power.runtime_status == RPM_SUSPENDED
+		&& !dev->power.disable_depth;
+}
+
+static inline bool pm_runtime_status_suspended(struct device *dev)
+{
+	return dev->power.runtime_status == RPM_SUSPENDED;
+}
+
+static inline bool pm_runtime_enabled(struct device *dev)
+{
+	return !dev->power.disable_depth;
+}
+
+static inline bool pm_runtime_callbacks_present(struct device *dev)
+{
+	return !dev->power.no_callbacks;
+}
+
+static inline void pm_runtime_mark_last_busy(struct device *dev)
+{
+	ACCESS_ONCE(dev->power.last_busy) = jiffies;
+}
+
+#else /* !CONFIG_PM_RUNTIME */
+
+static inline int __pm_runtime_idle(struct device *dev, int rpmflags)
+{
+	return -ENOSYS;
+}
+static inline int __pm_runtime_suspend(struct device *dev, int rpmflags)
+{
+	return -ENOSYS;
+}
+static inline int __pm_runtime_resume(struct device *dev, int rpmflags)
+{
+	return 1;
+}
+static inline int pm_schedule_suspend(struct device *dev, unsigned int delay)
+{
+	return -ENOSYS;
+}
+static inline int __pm_runtime_set_status(struct device *dev,
+					    unsigned int status) { return 0; }
+static inline int pm_runtime_barrier(struct device *dev) { return 0; }
+static inline void pm_runtime_enable(struct device *dev) {}
+static inline void __pm_runtime_disable(struct device *dev, bool c) {}
+static inline void pm_runtime_allow(struct device *dev) {}
+static inline void pm_runtime_forbid(struct device *dev) {}
+
+static inline bool pm_children_suspended(struct device *dev) { return false; }
+static inline void pm_runtime_get_noresume(struct device *dev) {}
+static inline void pm_runtime_put_noidle(struct device *dev) {}
+static inline bool device_run_wake(struct device *dev) { return false; }
+static inline void device_set_run_wake(struct device *dev, bool enable) {}
+static inline bool pm_runtime_suspended(struct device *dev) { return false; }
+static inline bool pm_runtime_status_suspended(struct device *dev) { return false; }
+static inline bool pm_runtime_enabled(struct device *dev) { return false; }
+
+static inline int pm_generic_runtime_idle(struct device *dev) { return 0; }
+static inline int pm_generic_runtime_suspend(struct device *dev) { return 0; }
+static inline int pm_generic_runtime_resume(struct device *dev) { return 0; }
+static inline void pm_runtime_no_callbacks(struct device *dev) {}
+static inline void pm_runtime_irq_safe(struct device *dev) {}
+
+static inline bool pm_runtime_callbacks_present(struct device *dev) { return false; }
+static inline void pm_runtime_mark_last_busy(struct device *dev) {}
+static inline void __pm_runtime_use_autosuspend(struct device *dev,
+						bool use) {}
+static inline void pm_runtime_set_autosuspend_delay(struct device *dev,
+						int delay) {}
+static inline unsigned long pm_runtime_autosuspend_expiration(
+				struct device *dev) { return 0; }
+
+#endif /* !CONFIG_PM_RUNTIME */
+
+static inline int pm_runtime_idle(struct device *dev)
+{
+	return __pm_runtime_idle(dev, 0);
+}
+
+static inline int pm_runtime_suspend(struct device *dev)
+{
+	return __pm_runtime_suspend(dev, 0);
+}
+
+static inline int pm_runtime_autosuspend(struct device *dev)
+{
+	return __pm_runtime_suspend(dev, RPM_AUTO);
+}
+
+static inline int pm_runtime_resume(struct device *dev)
+{
+	return __pm_runtime_resume(dev, 0);
+}
+
+static inline int pm_request_idle(struct device *dev)
+{
+	return __pm_runtime_idle(dev, RPM_ASYNC);
+}
+
+static inline int pm_request_resume(struct device *dev)
+{
+	return __pm_runtime_resume(dev, RPM_ASYNC);
+}
+
+static inline int pm_request_autosuspend(struct device *dev)
+{
+	return __pm_runtime_suspend(dev, RPM_ASYNC | RPM_AUTO);
+}
+
+static inline int pm_runtime_get(struct device *dev)
+{
+	return __pm_runtime_resume(dev, RPM_GET_PUT | RPM_ASYNC);
+}
+
+static inline int pm_runtime_get_sync(struct device *dev)
+{
+	return __pm_runtime_resume(dev, RPM_GET_PUT);
+}
+
+static inline int pm_runtime_put(struct device *dev)
+{
+	return __pm_runtime_idle(dev, RPM_GET_PUT | RPM_ASYNC);
+}
+
+static inline int pm_runtime_put_autosuspend(struct device *dev)
+{
+	return __pm_runtime_suspend(dev,
+	    RPM_GET_PUT | RPM_ASYNC | RPM_AUTO);
+}
+
+static inline int pm_runtime_put_sync(struct device *dev)
+{
+	return __pm_runtime_idle(dev, RPM_GET_PUT);
+}
+
+static inline int pm_runtime_put_sync_suspend(struct device *dev)
+{
+	return __pm_runtime_suspend(dev, RPM_GET_PUT);
+}
+
+static inline int pm_runtime_put_sync_autosuspend(struct device *dev)
+{
+	return __pm_runtime_suspend(dev, RPM_GET_PUT | RPM_AUTO);
+}
+
+static inline int pm_runtime_set_active(struct device *dev)
+{
+	return __pm_runtime_set_status(dev, RPM_ACTIVE);
+}
+
+static inline void pm_runtime_set_suspended(struct device *dev)
+{
+	__pm_runtime_set_status(dev, RPM_SUSPENDED);
+}
+
+static inline void pm_runtime_disable(struct device *dev)
+{
+	__pm_runtime_disable(dev, true);
+}
+
+static inline void pm_runtime_use_autosuspend(struct device *dev)
+{
+	__pm_runtime_use_autosuspend(dev, true);
+}
+
+static inline void pm_runtime_dont_use_autosuspend(struct device *dev)
+{
+	__pm_runtime_use_autosuspend(dev, false);
+}
+
+#endif
diff --git a/include/linux/pm_wakeup.h b/include/linux/pm_wakeup.h
new file mode 100644
index 00000000..569781fa
--- /dev/null
+++ b/include/linux/pm_wakeup.h
@@ -0,0 +1,195 @@
+/*
+ *  pm_wakeup.h - Power management wakeup interface
+ *
+ *  Copyright (C) 2008 Alan Stern
+ *  Copyright (C) 2010 Rafael J. Wysocki, Novell Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _LINUX_PM_WAKEUP_H
+#define _LINUX_PM_WAKEUP_H
+
+#ifndef _DEVICE_H_
+# error "please don't include this file directly"
+#endif
+
+#include <linux/types.h>
+
+/**
+ * struct wakeup_source - Representation of wakeup sources
+ *
+ * @total_time: Total time this wakeup source has been active.
+ * @max_time: Maximum time this wakeup source has been continuously active.
+ * @last_time: Monotonic clock when the wakeup source's was touched last time.
+ * @prevent_sleep_time: Total time this source has been preventing autosleep.
+ * @event_count: Number of signaled wakeup events.
+ * @active_count: Number of times the wakeup sorce was activated.
+ * @relax_count: Number of times the wakeup sorce was deactivated.
+ * @expire_count: Number of times the wakeup source's timeout has expired.
+ * @wakeup_count: Number of times the wakeup source might abort suspend.
+ * @active: Status of the wakeup source.
+ * @has_timeout: The wakeup source has been activated with a timeout.
+ */
+struct wakeup_source {
+	const char 		*name;
+	struct list_head	entry;
+	spinlock_t		lock;
+	struct timer_list	timer;
+	unsigned long		timer_expires;
+	ktime_t total_time;
+	ktime_t max_time;
+	ktime_t last_time;
+	ktime_t start_prevent_time;
+	ktime_t prevent_sleep_time;
+	unsigned long		event_count;
+	unsigned long		active_count;
+	unsigned long		relax_count;
+	unsigned long		expire_count;
+	unsigned long		wakeup_count;
+	bool			active:1;
+	bool			autosleep_enabled:1;
+};
+
+#ifdef CONFIG_PM_SLEEP
+
+/*
+ * Changes to device_may_wakeup take effect on the next pm state change.
+ */
+
+static inline bool device_can_wakeup(struct device *dev)
+{
+	return dev->power.can_wakeup;
+}
+
+static inline bool device_may_wakeup(struct device *dev)
+{
+	return dev->power.can_wakeup && !!dev->power.wakeup;
+}
+
+/* drivers/base/power/wakeup.c */
+extern void wakeup_source_prepare(struct wakeup_source *ws, const char *name);
+extern struct wakeup_source *wakeup_source_create(const char *name);
+extern void wakeup_source_drop(struct wakeup_source *ws);
+extern void wakeup_source_destroy(struct wakeup_source *ws);
+extern void wakeup_source_add(struct wakeup_source *ws);
+extern void wakeup_source_remove(struct wakeup_source *ws);
+extern struct wakeup_source *wakeup_source_register(const char *name);
+extern void wakeup_source_unregister(struct wakeup_source *ws);
+extern int device_wakeup_enable(struct device *dev);
+extern int device_wakeup_disable(struct device *dev);
+extern void device_set_wakeup_capable(struct device *dev, bool capable);
+extern int device_init_wakeup(struct device *dev, bool val);
+extern int device_set_wakeup_enable(struct device *dev, bool enable);
+extern void __pm_stay_awake(struct wakeup_source *ws);
+extern void pm_stay_awake(struct device *dev);
+extern void __pm_relax(struct wakeup_source *ws);
+extern void pm_relax(struct device *dev);
+extern void __pm_wakeup_event(struct wakeup_source *ws, unsigned int msec);
+extern void pm_wakeup_event(struct device *dev, unsigned int msec);
+
+#else /* !CONFIG_PM_SLEEP */
+
+static inline void device_set_wakeup_capable(struct device *dev, bool capable)
+{
+	dev->power.can_wakeup = capable;
+}
+
+static inline bool device_can_wakeup(struct device *dev)
+{
+	return dev->power.can_wakeup;
+}
+
+static inline void wakeup_source_prepare(struct wakeup_source *ws,
+					 const char *name) {}
+
+static inline struct wakeup_source *wakeup_source_create(const char *name)
+{
+	return NULL;
+}
+
+static inline void wakeup_source_drop(struct wakeup_source *ws) {}
+
+static inline void wakeup_source_destroy(struct wakeup_source *ws) {}
+
+static inline void wakeup_source_add(struct wakeup_source *ws) {}
+
+static inline void wakeup_source_remove(struct wakeup_source *ws) {}
+
+static inline struct wakeup_source *wakeup_source_register(const char *name)
+{
+	return NULL;
+}
+
+static inline void wakeup_source_unregister(struct wakeup_source *ws) {}
+
+static inline int device_wakeup_enable(struct device *dev)
+{
+	dev->power.should_wakeup = true;
+	return 0;
+}
+
+static inline int device_wakeup_disable(struct device *dev)
+{
+	dev->power.should_wakeup = false;
+	return 0;
+}
+
+static inline int device_set_wakeup_enable(struct device *dev, bool enable)
+{
+	dev->power.should_wakeup = enable;
+	return 0;
+}
+
+static inline int device_init_wakeup(struct device *dev, bool val)
+{
+	device_set_wakeup_capable(dev, val);
+	device_set_wakeup_enable(dev, val);
+	return 0;
+}
+
+static inline bool device_may_wakeup(struct device *dev)
+{
+	return dev->power.can_wakeup && dev->power.should_wakeup;
+}
+
+static inline void __pm_stay_awake(struct wakeup_source *ws) {}
+
+static inline void pm_stay_awake(struct device *dev) {}
+
+static inline void __pm_relax(struct wakeup_source *ws) {}
+
+static inline void pm_relax(struct device *dev) {}
+
+static inline void __pm_wakeup_event(struct wakeup_source *ws, unsigned int msec) {}
+
+static inline void pm_wakeup_event(struct device *dev, unsigned int msec) {}
+
+#endif /* !CONFIG_PM_SLEEP */
+
+static inline void wakeup_source_init(struct wakeup_source *ws,
+				      const char *name)
+{
+	wakeup_source_prepare(ws, name);
+	wakeup_source_add(ws);
+}
+
+static inline void wakeup_source_trash(struct wakeup_source *ws)
+{
+	wakeup_source_remove(ws);
+	wakeup_source_drop(ws);
+}
+
+#endif /* _LINUX_PM_WAKEUP_H */
diff --git a/include/linux/pmu.h b/include/linux/pmu.h
new file mode 100644
index 00000000..84e6a55a
--- /dev/null
+++ b/include/linux/pmu.h
@@ -0,0 +1,213 @@
+/*
+ * Definitions for talking to the PMU.  The PMU is a microcontroller
+ * which controls battery charging and system power on PowerBook 3400
+ * and 2400 models as well as the RTC and various other things.
+ *
+ * Copyright (C) 1998 Paul Mackerras.
+ */
+
+#ifndef _LINUX_PMU_H
+#define _LINUX_PMU_H
+
+#define PMU_DRIVER_VERSION	2
+
+/*
+ * PMU commands
+ */
+#define PMU_POWER_CTRL0		0x10	/* control power of some devices */
+#define PMU_POWER_CTRL		0x11	/* control power of some devices */
+#define PMU_ADB_CMD		0x20	/* send ADB packet */
+#define PMU_ADB_POLL_OFF	0x21	/* disable ADB auto-poll */
+#define PMU_WRITE_NVRAM		0x33	/* write non-volatile RAM */
+#define PMU_READ_NVRAM		0x3b	/* read non-volatile RAM */
+#define PMU_SET_RTC		0x30	/* set real-time clock */
+#define PMU_READ_RTC		0x38	/* read real-time clock */
+#define PMU_SET_VOLBUTTON	0x40	/* set volume up/down position */
+#define PMU_BACKLIGHT_BRIGHT	0x41	/* set backlight brightness */
+#define PMU_GET_VOLBUTTON	0x48	/* get volume up/down position */
+#define PMU_PCEJECT		0x4c	/* eject PC-card from slot */
+#define PMU_BATTERY_STATE	0x6b	/* report battery state etc. */
+#define PMU_SMART_BATTERY_STATE	0x6f	/* report battery state (new way) */
+#define PMU_SET_INTR_MASK	0x70	/* set PMU interrupt mask */
+#define PMU_INT_ACK		0x78	/* read interrupt bits */
+#define PMU_SHUTDOWN		0x7e	/* turn power off */
+#define PMU_CPU_SPEED		0x7d	/* control CPU speed on some models */
+#define PMU_SLEEP		0x7f	/* put CPU to sleep */
+#define PMU_POWER_EVENTS	0x8f	/* Send power-event commands to PMU */
+#define PMU_I2C_CMD		0x9a	/* I2C operations */
+#define PMU_RESET		0xd0	/* reset CPU */
+#define PMU_GET_BRIGHTBUTTON	0xd9	/* report brightness up/down pos */
+#define PMU_GET_COVER		0xdc	/* report cover open/closed */
+#define PMU_SYSTEM_READY	0xdf	/* tell PMU we are awake */
+#define PMU_GET_VERSION		0xea	/* read the PMU version */
+
+/* Bits to use with the PMU_POWER_CTRL0 command */
+#define PMU_POW0_ON		0x80	/* OR this to power ON the device */
+#define PMU_POW0_OFF		0x00	/* leave bit 7 to 0 to power it OFF */
+#define PMU_POW0_HARD_DRIVE	0x04	/* Hard drive power (on wallstreet/lombard ?) */
+
+/* Bits to use with the PMU_POWER_CTRL command */
+#define PMU_POW_ON		0x80	/* OR this to power ON the device */
+#define PMU_POW_OFF		0x00	/* leave bit 7 to 0 to power it OFF */
+#define PMU_POW_BACKLIGHT	0x01	/* backlight power */
+#define PMU_POW_CHARGER		0x02	/* battery charger power */
+#define PMU_POW_IRLED		0x04	/* IR led power (on wallstreet) */
+#define PMU_POW_MEDIABAY	0x08	/* media bay power (wallstreet/lombard ?) */
+
+/* Bits in PMU interrupt and interrupt mask bytes */
+#define PMU_INT_PCEJECT		0x04	/* PC-card eject buttons */
+#define PMU_INT_SNDBRT		0x08	/* sound/brightness up/down buttons */
+#define PMU_INT_ADB		0x10	/* ADB autopoll or reply data */
+#define PMU_INT_BATTERY		0x20	/* Battery state change */
+#define PMU_INT_ENVIRONMENT	0x40	/* Environment interrupts */
+#define PMU_INT_TICK		0x80	/* 1-second tick interrupt */
+
+/* Other bits in PMU interrupt valid when PMU_INT_ADB is set */
+#define PMU_INT_ADB_AUTO	0x04	/* ADB autopoll, when PMU_INT_ADB */
+#define PMU_INT_WAITING_CHARGER	0x01	/* ??? */
+#define PMU_INT_AUTO_SRQ_POLL	0x02	/* ??? */
+
+/* Bits in the environement message (either obtained via PMU_GET_COVER,
+ * or via PMU_INT_ENVIRONMENT on core99 */
+#define PMU_ENV_LID_CLOSED	0x01	/* The lid is closed */
+
+/* I2C related definitions */
+#define PMU_I2C_MODE_SIMPLE	0
+#define PMU_I2C_MODE_STDSUB	1
+#define PMU_I2C_MODE_COMBINED	2
+
+#define PMU_I2C_BUS_STATUS	0
+#define PMU_I2C_BUS_SYSCLK	1
+#define PMU_I2C_BUS_POWER	2
+
+#define PMU_I2C_STATUS_OK	0
+#define PMU_I2C_STATUS_DATAREAD	1
+#define PMU_I2C_STATUS_BUSY	0xfe
+
+
+/* Kind of PMU (model) */
+enum {
+	PMU_UNKNOWN,
+	PMU_OHARE_BASED,	/* 2400, 3400, 3500 (old G3 powerbook) */
+	PMU_HEATHROW_BASED,	/* PowerBook G3 series */
+	PMU_PADDINGTON_BASED,	/* 1999 PowerBook G3 */
+	PMU_KEYLARGO_BASED,	/* Core99 motherboard (PMU99) */
+	PMU_68K_V1,		/* 68K PMU, version 1 */
+	PMU_68K_V2, 		/* 68K PMU, version 2 */
+};
+
+/* PMU PMU_POWER_EVENTS commands */
+enum {
+	PMU_PWR_GET_POWERUP_EVENTS	= 0x00,
+	PMU_PWR_SET_POWERUP_EVENTS	= 0x01,
+	PMU_PWR_CLR_POWERUP_EVENTS	= 0x02,
+	PMU_PWR_GET_WAKEUP_EVENTS	= 0x03,
+	PMU_PWR_SET_WAKEUP_EVENTS	= 0x04,
+	PMU_PWR_CLR_WAKEUP_EVENTS	= 0x05,
+};
+
+/* Power events wakeup bits */
+enum {
+	PMU_PWR_WAKEUP_KEY		= 0x01,	/* Wake on key press */
+	PMU_PWR_WAKEUP_AC_INSERT	= 0x02, /* Wake on AC adapter plug */
+	PMU_PWR_WAKEUP_AC_CHANGE	= 0x04,
+	PMU_PWR_WAKEUP_LID_OPEN		= 0x08,
+	PMU_PWR_WAKEUP_RING		= 0x10,
+};
+	
+/*
+ * Ioctl commands for the /dev/pmu device
+ */
+#include <linux/ioctl.h>
+
+/* no param */
+#define PMU_IOC_SLEEP		_IO('B', 0)
+/* out param: u32*	backlight value: 0 to 15 */
+#define PMU_IOC_GET_BACKLIGHT	_IOR('B', 1, size_t)
+/* in param: u32	backlight value: 0 to 15 */
+#define PMU_IOC_SET_BACKLIGHT	_IOW('B', 2, size_t)
+/* out param: u32*	PMU model */
+#define PMU_IOC_GET_MODEL	_IOR('B', 3, size_t)
+/* out param: u32*	has_adb: 0 or 1 */
+#define PMU_IOC_HAS_ADB		_IOR('B', 4, size_t) 
+/* out param: u32*	can_sleep: 0 or 1 */
+#define PMU_IOC_CAN_SLEEP	_IOR('B', 5, size_t) 
+/* no param, but historically was _IOR('B', 6, 0), meaning 4 bytes */
+#define PMU_IOC_GRAB_BACKLIGHT	_IOR('B', 6, size_t) 
+
+#ifdef __KERNEL__
+
+extern int find_via_pmu(void);
+
+extern int pmu_request(struct adb_request *req,
+		void (*done)(struct adb_request *), int nbytes, ...);
+extern int pmu_queue_request(struct adb_request *req);
+extern void pmu_poll(void);
+extern void pmu_poll_adb(void); /* For use by xmon */
+extern void pmu_wait_complete(struct adb_request *req);
+
+/* For use before switching interrupts off for a long time;
+ * warning: not stackable
+ */
+#if defined(CONFIG_ADB_PMU)
+extern void pmu_suspend(void);
+extern void pmu_resume(void);
+#else
+static inline void pmu_suspend(void)
+{}
+static inline void pmu_resume(void)
+{}
+#endif
+
+extern void pmu_enable_irled(int on);
+
+extern void pmu_restart(void);
+extern void pmu_shutdown(void);
+extern void pmu_unlock(void);
+
+extern int pmu_present(void);
+extern int pmu_get_model(void);
+
+extern void pmu_backlight_set_sleep(int sleep);
+
+#define PMU_MAX_BATTERIES	2
+
+/* values for pmu_power_flags */
+#define PMU_PWR_AC_PRESENT	0x00000001
+
+/* values for pmu_battery_info.flags */
+#define PMU_BATT_PRESENT	0x00000001
+#define PMU_BATT_CHARGING	0x00000002
+#define PMU_BATT_TYPE_MASK	0x000000f0
+#define PMU_BATT_TYPE_SMART	0x00000010 /* Smart battery */
+#define PMU_BATT_TYPE_HOOPER	0x00000020 /* 3400/3500 */
+#define PMU_BATT_TYPE_COMET	0x00000030 /* 2400 */
+
+struct pmu_battery_info
+{
+	unsigned int	flags;
+	unsigned int	charge;		/* current charge */
+	unsigned int	max_charge;	/* maximum charge */
+	signed int	amperage;	/* current, positive if charging */
+	unsigned int	voltage;	/* voltage */
+	unsigned int	time_remaining;	/* remaining time */
+};
+
+extern int pmu_battery_count;
+extern struct pmu_battery_info pmu_batteries[PMU_MAX_BATTERIES];
+extern unsigned int pmu_power_flags;
+
+/* Backlight */
+extern void pmu_backlight_init(void);
+
+/* some code needs to know if the PMU was suspended for hibernation */
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
+extern int pmu_sys_suspended;
+#else
+/* if power management is not configured it can't be suspended */
+#define pmu_sys_suspended	0
+#endif
+
+#endif	/* __KERNEL__ */
+
+#endif /* _LINUX_PMU_H */
diff --git a/include/linux/pnfs_osd_xdr.h b/include/linux/pnfs_osd_xdr.h
new file mode 100644
index 00000000..435dd5fa
--- /dev/null
+++ b/include/linux/pnfs_osd_xdr.h
@@ -0,0 +1,318 @@
+/*
+ *  pNFS-osd on-the-wire data structures
+ *
+ *  Copyright (C) 2007 Panasas Inc. [year of first publication]
+ *  All rights reserved.
+ *
+ *  Benny Halevy <bhalevy@panasas.com>
+ *  Boaz Harrosh <bharrosh@panasas.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2
+ *  See the file COPYING included with this distribution for more details.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *  1. Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *  2. Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in the
+ *     documentation and/or other materials provided with the distribution.
+ *  3. Neither the name of the Panasas company nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *  DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ *  FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ *  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ *  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ *  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ *  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ *  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef __PNFS_OSD_XDR_H__
+#define __PNFS_OSD_XDR_H__
+
+#include <linux/nfs_fs.h>
+#include <linux/nfs_page.h>
+
+/*
+ * draft-ietf-nfsv4-minorversion-22
+ * draft-ietf-nfsv4-pnfs-obj-12
+ */
+
+/* Layout Structure */
+
+enum pnfs_osd_raid_algorithm4 {
+	PNFS_OSD_RAID_0		= 1,
+	PNFS_OSD_RAID_4		= 2,
+	PNFS_OSD_RAID_5		= 3,
+	PNFS_OSD_RAID_PQ	= 4     /* Reed-Solomon P+Q */
+};
+
+/*   struct pnfs_osd_data_map4 {
+ *       uint32_t                    odm_num_comps;
+ *       length4                     odm_stripe_unit;
+ *       uint32_t                    odm_group_width;
+ *       uint32_t                    odm_group_depth;
+ *       uint32_t                    odm_mirror_cnt;
+ *       pnfs_osd_raid_algorithm4    odm_raid_algorithm;
+ *   };
+ */
+struct pnfs_osd_data_map {
+	u32	odm_num_comps;
+	u64	odm_stripe_unit;
+	u32	odm_group_width;
+	u32	odm_group_depth;
+	u32	odm_mirror_cnt;
+	u32	odm_raid_algorithm;
+};
+
+/*   struct pnfs_osd_objid4 {
+ *       deviceid4       oid_device_id;
+ *       uint64_t        oid_partition_id;
+ *       uint64_t        oid_object_id;
+ *   };
+ */
+struct pnfs_osd_objid {
+	struct nfs4_deviceid	oid_device_id;
+	u64			oid_partition_id;
+	u64			oid_object_id;
+};
+
+/* For printout. I use:
+ * kprint("dev(%llx:%llx)", _DEVID_LO(pointer), _DEVID_HI(pointer));
+ * BE style
+ */
+#define _DEVID_LO(oid_device_id) \
+	(unsigned long long)be64_to_cpup((__be64 *)(oid_device_id)->data)
+
+#define _DEVID_HI(oid_device_id) \
+	(unsigned long long)be64_to_cpup(((__be64 *)(oid_device_id)->data) + 1)
+
+enum pnfs_osd_version {
+	PNFS_OSD_MISSING              = 0,
+	PNFS_OSD_VERSION_1            = 1,
+	PNFS_OSD_VERSION_2            = 2
+};
+
+struct pnfs_osd_opaque_cred {
+	u32 cred_len;
+	void *cred;
+};
+
+enum pnfs_osd_cap_key_sec {
+	PNFS_OSD_CAP_KEY_SEC_NONE     = 0,
+	PNFS_OSD_CAP_KEY_SEC_SSV      = 1,
+};
+
+/*   struct pnfs_osd_object_cred4 {
+ *       pnfs_osd_objid4         oc_object_id;
+ *       pnfs_osd_version4       oc_osd_version;
+ *       pnfs_osd_cap_key_sec4   oc_cap_key_sec;
+ *       opaque                  oc_capability_key<>;
+ *       opaque                  oc_capability<>;
+ *   };
+ */
+struct pnfs_osd_object_cred {
+	struct pnfs_osd_objid		oc_object_id;
+	u32				oc_osd_version;
+	u32				oc_cap_key_sec;
+	struct pnfs_osd_opaque_cred	oc_cap_key;
+	struct pnfs_osd_opaque_cred	oc_cap;
+};
+
+/*   struct pnfs_osd_layout4 {
+ *       pnfs_osd_data_map4      olo_map;
+ *       uint32_t                olo_comps_index;
+ *       pnfs_osd_object_cred4   olo_components<>;
+ *   };
+ */
+struct pnfs_osd_layout {
+	struct pnfs_osd_data_map	olo_map;
+	u32				olo_comps_index;
+	u32				olo_num_comps;
+	struct pnfs_osd_object_cred	*olo_comps;
+};
+
+/* Device Address */
+enum pnfs_osd_targetid_type {
+	OBJ_TARGET_ANON = 1,
+	OBJ_TARGET_SCSI_NAME = 2,
+	OBJ_TARGET_SCSI_DEVICE_ID = 3,
+};
+
+/*   union pnfs_osd_targetid4 switch (pnfs_osd_targetid_type4 oti_type) {
+ *       case OBJ_TARGET_SCSI_NAME:
+ *           string              oti_scsi_name<>;
+ *
+ *       case OBJ_TARGET_SCSI_DEVICE_ID:
+ *           opaque              oti_scsi_device_id<>;
+ *
+ *       default:
+ *           void;
+ *   };
+ *
+ *   union pnfs_osd_targetaddr4 switch (bool ota_available) {
+ *       case TRUE:
+ *           netaddr4            ota_netaddr;
+ *       case FALSE:
+ *           void;
+ *   };
+ *
+ *   struct pnfs_osd_deviceaddr4 {
+ *       pnfs_osd_targetid4      oda_targetid;
+ *       pnfs_osd_targetaddr4    oda_targetaddr;
+ *       uint64_t                oda_lun;
+ *       opaque                  oda_systemid<>;
+ *       pnfs_osd_object_cred4   oda_root_obj_cred;
+ *       opaque                  oda_osdname<>;
+ *   };
+ */
+struct pnfs_osd_targetid {
+	u32				oti_type;
+	struct nfs4_string		oti_scsi_device_id;
+};
+
+/*   struct netaddr4 {
+ *       // see struct rpcb in RFC1833
+ *       string r_netid<>;    // network id
+ *       string r_addr<>;     // universal address
+ *   };
+ */
+struct pnfs_osd_net_addr {
+	struct nfs4_string	r_netid;
+	struct nfs4_string	r_addr;
+};
+
+struct pnfs_osd_targetaddr {
+	u32				ota_available;
+	struct pnfs_osd_net_addr	ota_netaddr;
+};
+
+struct pnfs_osd_deviceaddr {
+	struct pnfs_osd_targetid	oda_targetid;
+	struct pnfs_osd_targetaddr	oda_targetaddr;
+	u8				oda_lun[8];
+	struct nfs4_string		oda_systemid;
+	struct pnfs_osd_object_cred	oda_root_obj_cred;
+	struct nfs4_string		oda_osdname;
+};
+
+/* LAYOUTCOMMIT: layoutupdate */
+
+/*   union pnfs_osd_deltaspaceused4 switch (bool dsu_valid) {
+ *       case TRUE:
+ *           int64_t     dsu_delta;
+ *       case FALSE:
+ *           void;
+ *   };
+ *
+ *   struct pnfs_osd_layoutupdate4 {
+ *       pnfs_osd_deltaspaceused4    olu_delta_space_used;
+ *       bool                        olu_ioerr_flag;
+ *   };
+ */
+struct pnfs_osd_layoutupdate {
+	u32	dsu_valid;
+	s64	dsu_delta;
+	u32	olu_ioerr_flag;
+};
+
+/* LAYOUTRETURN: I/O Rrror Report */
+
+enum pnfs_osd_errno {
+	PNFS_OSD_ERR_EIO		= 1,
+	PNFS_OSD_ERR_NOT_FOUND		= 2,
+	PNFS_OSD_ERR_NO_SPACE		= 3,
+	PNFS_OSD_ERR_BAD_CRED		= 4,
+	PNFS_OSD_ERR_NO_ACCESS		= 5,
+	PNFS_OSD_ERR_UNREACHABLE	= 6,
+	PNFS_OSD_ERR_RESOURCE		= 7
+};
+
+/*   struct pnfs_osd_ioerr4 {
+ *       pnfs_osd_objid4     oer_component;
+ *       length4             oer_comp_offset;
+ *       length4             oer_comp_length;
+ *       bool                oer_iswrite;
+ *       pnfs_osd_errno4     oer_errno;
+ *   };
+ */
+struct pnfs_osd_ioerr {
+	struct pnfs_osd_objid	oer_component;
+	u64			oer_comp_offset;
+	u64			oer_comp_length;
+	u32			oer_iswrite;
+	u32			oer_errno;
+};
+
+/* OSD XDR Client API */
+/* Layout helpers */
+/* Layout decoding is done in two parts:
+ * 1. First Call pnfs_osd_xdr_decode_layout_map to read in only the header part
+ *    of the layout. @iter members need not be initialized.
+ *    Returned:
+ *             @layout members are set. (@layout->olo_comps set to NULL).
+ *
+ *             Zero on success, or negative error if passed xdr is broken.
+ *
+ * 2. 2nd Call pnfs_osd_xdr_decode_layout_comp() in a loop until it returns
+ *    false, to decode the next component.
+ *    Returned:
+ *       true if there is more to decode or false if we are done or error.
+ *
+ * Example:
+ *	struct pnfs_osd_xdr_decode_layout_iter iter;
+ *	struct pnfs_osd_layout layout;
+ *	struct pnfs_osd_object_cred comp;
+ *	int status;
+ *
+ *	status = pnfs_osd_xdr_decode_layout_map(&layout, &iter, xdr);
+ *	if (unlikely(status))
+ *		goto err;
+ *	while(pnfs_osd_xdr_decode_layout_comp(&comp, &iter, xdr, &status)) {
+ *		// All of @comp strings point to inside the xdr_buffer
+ *		// or scrach buffer. Copy them out to user memory eg.
+ *		copy_single_comp(dest_comp++, &comp);
+ *	}
+ *	if (unlikely(status))
+ *		goto err;
+ */
+
+struct pnfs_osd_xdr_decode_layout_iter {
+	unsigned total_comps;
+	unsigned decoded_comps;
+};
+
+extern int pnfs_osd_xdr_decode_layout_map(struct pnfs_osd_layout *layout,
+	struct pnfs_osd_xdr_decode_layout_iter *iter, struct xdr_stream *xdr);
+
+extern bool pnfs_osd_xdr_decode_layout_comp(struct pnfs_osd_object_cred *comp,
+	struct pnfs_osd_xdr_decode_layout_iter *iter, struct xdr_stream *xdr,
+	int *err);
+
+/* Device Info helpers */
+
+/* Note: All strings inside @deviceaddr point to space inside @p.
+ * @p should stay valid while @deviceaddr is in use.
+ */
+extern void pnfs_osd_xdr_decode_deviceaddr(
+	struct pnfs_osd_deviceaddr *deviceaddr, __be32 *p);
+
+/* layoutupdate (layout_commit) xdr helpers */
+extern int
+pnfs_osd_xdr_encode_layoutupdate(struct xdr_stream *xdr,
+				 struct pnfs_osd_layoutupdate *lou);
+
+/* osd_ioerror encoding (layout_return) */
+extern __be32 *pnfs_osd_xdr_ioerr_reserve_space(struct xdr_stream *xdr);
+extern void pnfs_osd_xdr_encode_ioerr(__be32 *p, struct pnfs_osd_ioerr *ioerr);
+
+#endif /* __PNFS_OSD_XDR_H__ */
diff --git a/include/linux/pnp.h b/include/linux/pnp.h
new file mode 100644
index 00000000..195aafc6
--- /dev/null
+++ b/include/linux/pnp.h
@@ -0,0 +1,505 @@
+/*
+ * Linux Plug and Play Support
+ * Copyright by Adam Belay <ambx1@neo.rr.com>
+ * Copyright (C) 2008 Hewlett-Packard Development Company, L.P.
+ *	Bjorn Helgaas <bjorn.helgaas@hp.com>
+ */
+
+#ifndef _LINUX_PNP_H
+#define _LINUX_PNP_H
+
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/mod_devicetable.h>
+
+#define PNP_NAME_LEN		50
+
+struct pnp_protocol;
+struct pnp_dev;
+
+/*
+ * Resource Management
+ */
+#ifdef CONFIG_PNP
+struct resource *pnp_get_resource(struct pnp_dev *dev, unsigned long type,
+				unsigned int num);
+#else
+static inline struct resource *pnp_get_resource(struct pnp_dev *dev,
+			unsigned long type, unsigned int num)
+{
+	return NULL;
+}
+#endif
+
+static inline int pnp_resource_valid(struct resource *res)
+{
+	if (res)
+		return 1;
+	return 0;
+}
+
+static inline int pnp_resource_enabled(struct resource *res)
+{
+	if (res && !(res->flags & IORESOURCE_DISABLED))
+		return 1;
+	return 0;
+}
+
+static inline resource_size_t pnp_resource_len(struct resource *res)
+{
+	if (res->start == 0 && res->end == 0)
+		return 0;
+	return resource_size(res);
+}
+
+
+static inline resource_size_t pnp_port_start(struct pnp_dev *dev,
+					     unsigned int bar)
+{
+	struct resource *res = pnp_get_resource(dev, IORESOURCE_IO, bar);
+
+	if (pnp_resource_valid(res))
+		return res->start;
+	return 0;
+}
+
+static inline resource_size_t pnp_port_end(struct pnp_dev *dev,
+					   unsigned int bar)
+{
+	struct resource *res = pnp_get_resource(dev, IORESOURCE_IO, bar);
+
+	if (pnp_resource_valid(res))
+		return res->end;
+	return 0;
+}
+
+static inline unsigned long pnp_port_flags(struct pnp_dev *dev,
+					   unsigned int bar)
+{
+	struct resource *res = pnp_get_resource(dev, IORESOURCE_IO, bar);
+
+	if (pnp_resource_valid(res))
+		return res->flags;
+	return IORESOURCE_IO | IORESOURCE_AUTO;
+}
+
+static inline int pnp_port_valid(struct pnp_dev *dev, unsigned int bar)
+{
+	return pnp_resource_valid(pnp_get_resource(dev, IORESOURCE_IO, bar));
+}
+
+static inline resource_size_t pnp_port_len(struct pnp_dev *dev,
+					   unsigned int bar)
+{
+	struct resource *res = pnp_get_resource(dev, IORESOURCE_IO, bar);
+
+	if (pnp_resource_valid(res))
+		return pnp_resource_len(res);
+	return 0;
+}
+
+
+static inline resource_size_t pnp_mem_start(struct pnp_dev *dev,
+					    unsigned int bar)
+{
+	struct resource *res = pnp_get_resource(dev, IORESOURCE_MEM, bar);
+
+	if (pnp_resource_valid(res))
+		return res->start;
+	return 0;
+}
+
+static inline resource_size_t pnp_mem_end(struct pnp_dev *dev,
+					  unsigned int bar)
+{
+	struct resource *res = pnp_get_resource(dev, IORESOURCE_MEM, bar);
+
+	if (pnp_resource_valid(res))
+		return res->end;
+	return 0;
+}
+
+static inline unsigned long pnp_mem_flags(struct pnp_dev *dev, unsigned int bar)
+{
+	struct resource *res = pnp_get_resource(dev, IORESOURCE_MEM, bar);
+
+	if (pnp_resource_valid(res))
+		return res->flags;
+	return IORESOURCE_MEM | IORESOURCE_AUTO;
+}
+
+static inline int pnp_mem_valid(struct pnp_dev *dev, unsigned int bar)
+{
+	return pnp_resource_valid(pnp_get_resource(dev, IORESOURCE_MEM, bar));
+}
+
+static inline resource_size_t pnp_mem_len(struct pnp_dev *dev,
+					  unsigned int bar)
+{
+	struct resource *res = pnp_get_resource(dev, IORESOURCE_MEM, bar);
+
+	if (pnp_resource_valid(res))
+		return pnp_resource_len(res);
+	return 0;
+}
+
+
+static inline resource_size_t pnp_irq(struct pnp_dev *dev, unsigned int bar)
+{
+	struct resource *res = pnp_get_resource(dev, IORESOURCE_IRQ, bar);
+
+	if (pnp_resource_valid(res))
+		return res->start;
+	return -1;
+}
+
+static inline unsigned long pnp_irq_flags(struct pnp_dev *dev, unsigned int bar)
+{
+	struct resource *res = pnp_get_resource(dev, IORESOURCE_IRQ, bar);
+
+	if (pnp_resource_valid(res))
+		return res->flags;
+	return IORESOURCE_IRQ | IORESOURCE_AUTO;
+}
+
+static inline int pnp_irq_valid(struct pnp_dev *dev, unsigned int bar)
+{
+	return pnp_resource_valid(pnp_get_resource(dev, IORESOURCE_IRQ, bar));
+}
+
+
+static inline resource_size_t pnp_dma(struct pnp_dev *dev, unsigned int bar)
+{
+	struct resource *res = pnp_get_resource(dev, IORESOURCE_DMA, bar);
+
+	if (pnp_resource_valid(res))
+		return res->start;
+	return -1;
+}
+
+static inline unsigned long pnp_dma_flags(struct pnp_dev *dev, unsigned int bar)
+{
+	struct resource *res = pnp_get_resource(dev, IORESOURCE_DMA, bar);
+
+	if (pnp_resource_valid(res))
+		return res->flags;
+	return IORESOURCE_DMA | IORESOURCE_AUTO;
+}
+
+static inline int pnp_dma_valid(struct pnp_dev *dev, unsigned int bar)
+{
+	return pnp_resource_valid(pnp_get_resource(dev, IORESOURCE_DMA, bar));
+}
+
+
+/*
+ * Device Management
+ */
+
+struct pnp_card {
+	struct device dev;		/* Driver Model device interface */
+	unsigned char number;		/* used as an index, must be unique */
+	struct list_head global_list;	/* node in global list of cards */
+	struct list_head protocol_list;	/* node in protocol's list of cards */
+	struct list_head devices;	/* devices attached to the card */
+
+	struct pnp_protocol *protocol;
+	struct pnp_id *id;		/* contains supported EISA IDs */
+
+	char name[PNP_NAME_LEN];	/* contains a human-readable name */
+	unsigned char pnpver;		/* Plug & Play version */
+	unsigned char productver;	/* product version */
+	unsigned int serial;		/* serial number */
+	unsigned char checksum;		/* if zero - checksum passed */
+	struct proc_dir_entry *procdir;	/* directory entry in /proc/bus/isapnp */
+};
+
+#define global_to_pnp_card(n) list_entry(n, struct pnp_card, global_list)
+#define protocol_to_pnp_card(n) list_entry(n, struct pnp_card, protocol_list)
+#define to_pnp_card(n) container_of(n, struct pnp_card, dev)
+#define pnp_for_each_card(card) \
+	for((card) = global_to_pnp_card(pnp_cards.next); \
+	(card) != global_to_pnp_card(&pnp_cards); \
+	(card) = global_to_pnp_card((card)->global_list.next))
+
+struct pnp_card_link {
+	struct pnp_card *card;
+	struct pnp_card_driver *driver;
+	void *driver_data;
+	pm_message_t pm_state;
+};
+
+static inline void *pnp_get_card_drvdata(struct pnp_card_link *pcard)
+{
+	return pcard->driver_data;
+}
+
+static inline void pnp_set_card_drvdata(struct pnp_card_link *pcard, void *data)
+{
+	pcard->driver_data = data;
+}
+
+struct pnp_dev {
+	struct device dev;		/* Driver Model device interface */
+	u64 dma_mask;
+	unsigned int number;		/* used as an index, must be unique */
+	int status;
+
+	struct list_head global_list;	/* node in global list of devices */
+	struct list_head protocol_list;	/* node in list of device's protocol */
+	struct list_head card_list;	/* node in card's list of devices */
+	struct list_head rdev_list;	/* node in cards list of requested devices */
+
+	struct pnp_protocol *protocol;
+	struct pnp_card *card;	/* card the device is attached to, none if NULL */
+	struct pnp_driver *driver;
+	struct pnp_card_link *card_link;
+
+	struct pnp_id *id;		/* supported EISA IDs */
+
+	int active;
+	int capabilities;
+	unsigned int num_dependent_sets;
+	struct list_head resources;
+	struct list_head options;
+
+	char name[PNP_NAME_LEN];	/* contains a human-readable name */
+	int flags;			/* used by protocols */
+	struct proc_dir_entry *procent;	/* device entry in /proc/bus/isapnp */
+	void *data;
+};
+
+#define global_to_pnp_dev(n) list_entry(n, struct pnp_dev, global_list)
+#define card_to_pnp_dev(n) list_entry(n, struct pnp_dev, card_list)
+#define protocol_to_pnp_dev(n) list_entry(n, struct pnp_dev, protocol_list)
+#define	to_pnp_dev(n) container_of(n, struct pnp_dev, dev)
+#define pnp_for_each_dev(dev) \
+	for((dev) = global_to_pnp_dev(pnp_global.next); \
+	(dev) != global_to_pnp_dev(&pnp_global); \
+	(dev) = global_to_pnp_dev((dev)->global_list.next))
+#define card_for_each_dev(card,dev) \
+	for((dev) = card_to_pnp_dev((card)->devices.next); \
+	(dev) != card_to_pnp_dev(&(card)->devices); \
+	(dev) = card_to_pnp_dev((dev)->card_list.next))
+#define pnp_dev_name(dev) (dev)->name
+
+static inline void *pnp_get_drvdata(struct pnp_dev *pdev)
+{
+	return dev_get_drvdata(&pdev->dev);
+}
+
+static inline void pnp_set_drvdata(struct pnp_dev *pdev, void *data)
+{
+	dev_set_drvdata(&pdev->dev, data);
+}
+
+struct pnp_fixup {
+	char id[7];
+	void (*quirk_function) (struct pnp_dev * dev);	/* fixup function */
+};
+
+/* config parameters */
+#define PNP_CONFIG_NORMAL	0x0001
+#define PNP_CONFIG_FORCE	0x0002	/* disables validity checking */
+
+/* capabilities */
+#define PNP_READ		0x0001
+#define PNP_WRITE		0x0002
+#define PNP_DISABLE		0x0004
+#define PNP_CONFIGURABLE	0x0008
+#define PNP_REMOVABLE		0x0010
+
+#define pnp_can_read(dev)	(((dev)->protocol->get) && \
+				 ((dev)->capabilities & PNP_READ))
+#define pnp_can_write(dev)	(((dev)->protocol->set) && \
+				 ((dev)->capabilities & PNP_WRITE))
+#define pnp_can_disable(dev)	(((dev)->protocol->disable) && \
+				 ((dev)->capabilities & PNP_DISABLE))
+#define pnp_can_configure(dev)	((!(dev)->active) && \
+				 ((dev)->capabilities & PNP_CONFIGURABLE))
+
+#ifdef CONFIG_ISAPNP
+extern struct pnp_protocol isapnp_protocol;
+#define pnp_device_is_isapnp(dev) ((dev)->protocol == (&isapnp_protocol))
+#else
+#define pnp_device_is_isapnp(dev) 0
+#endif
+extern struct mutex pnp_res_mutex;
+
+#ifdef CONFIG_PNPBIOS
+extern struct pnp_protocol pnpbios_protocol;
+#define pnp_device_is_pnpbios(dev) ((dev)->protocol == (&pnpbios_protocol))
+#else
+#define pnp_device_is_pnpbios(dev) 0
+#endif
+
+#ifdef CONFIG_PNPACPI
+extern struct pnp_protocol pnpacpi_protocol;
+
+static inline struct acpi_device *pnp_acpi_device(struct pnp_dev *dev)
+{
+	if (dev->protocol == &pnpacpi_protocol)
+		return dev->data;
+	return NULL;
+}
+#else
+#define pnp_acpi_device(dev) 0
+#endif
+
+/* status */
+#define PNP_READY		0x0000
+#define PNP_ATTACHED		0x0001
+#define PNP_BUSY		0x0002
+#define PNP_FAULTY		0x0004
+
+/* isapnp specific macros */
+
+#define isapnp_card_number(dev)	((dev)->card ? (dev)->card->number : -1)
+#define isapnp_csn_number(dev)  ((dev)->number)
+
+/*
+ * Driver Management
+ */
+
+struct pnp_id {
+	char id[PNP_ID_LEN];
+	struct pnp_id *next;
+};
+
+struct pnp_driver {
+	char *name;
+	const struct pnp_device_id *id_table;
+	unsigned int flags;
+	int (*probe) (struct pnp_dev *dev, const struct pnp_device_id *dev_id);
+	void (*remove) (struct pnp_dev *dev);
+	void (*shutdown) (struct pnp_dev *dev);
+	int (*suspend) (struct pnp_dev *dev, pm_message_t state);
+	int (*resume) (struct pnp_dev *dev);
+	struct device_driver driver;
+};
+
+#define	to_pnp_driver(drv) container_of(drv, struct pnp_driver, driver)
+
+struct pnp_card_driver {
+	struct list_head global_list;
+	char *name;
+	const struct pnp_card_device_id *id_table;
+	unsigned int flags;
+	int (*probe) (struct pnp_card_link *card,
+		      const struct pnp_card_device_id *card_id);
+	void (*remove) (struct pnp_card_link *card);
+	int (*suspend) (struct pnp_card_link *card, pm_message_t state);
+	int (*resume) (struct pnp_card_link *card);
+	struct pnp_driver link;
+};
+
+#define	to_pnp_card_driver(drv) container_of(drv, struct pnp_card_driver, link)
+
+/* pnp driver flags */
+#define PNP_DRIVER_RES_DO_NOT_CHANGE	0x0001	/* do not change the state of the device */
+#define PNP_DRIVER_RES_DISABLE		0x0003	/* ensure the device is disabled */
+
+/*
+ * Protocol Management
+ */
+
+struct pnp_protocol {
+	struct list_head protocol_list;
+	char *name;
+
+	/* resource control functions */
+	int (*get) (struct pnp_dev *dev);
+	int (*set) (struct pnp_dev *dev);
+	int (*disable) (struct pnp_dev *dev);
+
+	/* protocol specific suspend/resume */
+	bool (*can_wakeup) (struct pnp_dev *dev);
+	int (*suspend) (struct pnp_dev * dev, pm_message_t state);
+	int (*resume) (struct pnp_dev * dev);
+
+	/* used by pnp layer only (look but don't touch) */
+	unsigned char number;	/* protocol number */
+	struct device dev;	/* link to driver model */
+	struct list_head cards;
+	struct list_head devices;
+};
+
+#define to_pnp_protocol(n) list_entry(n, struct pnp_protocol, protocol_list)
+#define protocol_for_each_card(protocol,card) \
+	for((card) = protocol_to_pnp_card((protocol)->cards.next); \
+	(card) != protocol_to_pnp_card(&(protocol)->cards); \
+	(card) = protocol_to_pnp_card((card)->protocol_list.next))
+#define protocol_for_each_dev(protocol,dev) \
+	for((dev) = protocol_to_pnp_dev((protocol)->devices.next); \
+	(dev) != protocol_to_pnp_dev(&(protocol)->devices); \
+	(dev) = protocol_to_pnp_dev((dev)->protocol_list.next))
+
+extern struct bus_type pnp_bus_type;
+
+#if defined(CONFIG_PNP)
+
+/* device management */
+int pnp_device_attach(struct pnp_dev *pnp_dev);
+void pnp_device_detach(struct pnp_dev *pnp_dev);
+extern struct list_head pnp_global;
+extern int pnp_platform_devices;
+
+/* multidevice card support */
+struct pnp_dev *pnp_request_card_device(struct pnp_card_link *clink,
+					const char *id, struct pnp_dev *from);
+void pnp_release_card_device(struct pnp_dev *dev);
+int pnp_register_card_driver(struct pnp_card_driver *drv);
+void pnp_unregister_card_driver(struct pnp_card_driver *drv);
+extern struct list_head pnp_cards;
+
+/* resource management */
+int pnp_possible_config(struct pnp_dev *dev, int type, resource_size_t base,
+			resource_size_t size);
+int pnp_auto_config_dev(struct pnp_dev *dev);
+int pnp_start_dev(struct pnp_dev *dev);
+int pnp_stop_dev(struct pnp_dev *dev);
+int pnp_activate_dev(struct pnp_dev *dev);
+int pnp_disable_dev(struct pnp_dev *dev);
+int pnp_range_reserved(resource_size_t start, resource_size_t end);
+
+/* protocol helpers */
+int pnp_is_active(struct pnp_dev *dev);
+int compare_pnp_id(struct pnp_id *pos, const char *id);
+int pnp_register_driver(struct pnp_driver *drv);
+void pnp_unregister_driver(struct pnp_driver *drv);
+
+#else
+
+/* device management */
+static inline int pnp_device_attach(struct pnp_dev *pnp_dev) { return -ENODEV; }
+static inline void pnp_device_detach(struct pnp_dev *pnp_dev) { }
+
+#define pnp_platform_devices 0
+
+/* multidevice card support */
+static inline struct pnp_dev *pnp_request_card_device(struct pnp_card_link *clink, const char *id, struct pnp_dev *from) { return NULL; }
+static inline void pnp_release_card_device(struct pnp_dev *dev) { }
+static inline int pnp_register_card_driver(struct pnp_card_driver *drv) { return -ENODEV; }
+static inline void pnp_unregister_card_driver(struct pnp_card_driver *drv) { }
+
+/* resource management */
+static inline int pnp_possible_config(struct pnp_dev *dev, int type,
+				      resource_size_t base,
+				      resource_size_t size) { return 0; }
+static inline int pnp_auto_config_dev(struct pnp_dev *dev) { return -ENODEV; }
+static inline int pnp_start_dev(struct pnp_dev *dev) { return -ENODEV; }
+static inline int pnp_stop_dev(struct pnp_dev *dev) { return -ENODEV; }
+static inline int pnp_activate_dev(struct pnp_dev *dev) { return -ENODEV; }
+static inline int pnp_disable_dev(struct pnp_dev *dev) { return -ENODEV; }
+static inline int pnp_range_reserved(resource_size_t start, resource_size_t end) { return 0;}
+
+/* protocol helpers */
+static inline int pnp_is_active(struct pnp_dev *dev) { return 0; }
+static inline int compare_pnp_id(struct pnp_id *pos, const char *id) { return -ENODEV; }
+static inline int pnp_register_driver(struct pnp_driver *drv) { return -ENODEV; }
+static inline void pnp_unregister_driver(struct pnp_driver *drv) { }
+
+#endif /* CONFIG_PNP */
+
+#endif /* _LINUX_PNP_H */
diff --git a/include/linux/poison.h b/include/linux/poison.h
new file mode 100644
index 00000000..2110a81c
--- /dev/null
+++ b/include/linux/poison.h
@@ -0,0 +1,89 @@
+#ifndef _LINUX_POISON_H
+#define _LINUX_POISON_H
+
+/********** include/linux/list.h **********/
+
+/*
+ * Architectures might want to move the poison pointer offset
+ * into some well-recognized area such as 0xdead000000000000,
+ * that is also not mappable by user-space exploits:
+ */
+#ifdef CONFIG_ILLEGAL_POINTER_VALUE
+# define POISON_POINTER_DELTA _AC(CONFIG_ILLEGAL_POINTER_VALUE, UL)
+#else
+# define POISON_POINTER_DELTA 0
+#endif
+
+/*
+ * These are non-NULL pointers that will result in page faults
+ * under normal circumstances, used to verify that nobody uses
+ * non-initialized list entries.
+ */
+#define LIST_POISON1  ((void *) 0x00100100 + POISON_POINTER_DELTA)
+#define LIST_POISON2  ((void *) 0x00200200 + POISON_POINTER_DELTA)
+
+/********** include/linux/timer.h **********/
+/*
+ * Magic number "tsta" to indicate a static timer initializer
+ * for the object debugging code.
+ */
+#define TIMER_ENTRY_STATIC	((void *) 0x74737461)
+
+/********** mm/debug-pagealloc.c **********/
+#define PAGE_POISON 0xaa
+
+/********** mm/slab.c **********/
+/*
+ * Magic nums for obj red zoning.
+ * Placed in the first word before and the first word after an obj.
+ */
+#define	RED_INACTIVE	0x09F911029D74E35BULL	/* when obj is inactive */
+#define	RED_ACTIVE	0xD84156C5635688C0ULL	/* when obj is active */
+
+#define SLUB_RED_INACTIVE	0xbb
+#define SLUB_RED_ACTIVE		0xcc
+
+/* ...and for poisoning */
+#define	POISON_INUSE	0x5a	/* for use-uninitialised poisoning */
+#define POISON_FREE	0x6b	/* for use-after-free poisoning */
+#define	POISON_END	0xa5	/* end-byte of poisoning */
+
+/********** arch/$ARCH/mm/init.c **********/
+#define POISON_FREE_INITMEM	0xcc
+
+/********** arch/ia64/hp/common/sba_iommu.c **********/
+/*
+ * arch/ia64/hp/common/sba_iommu.c uses a 16-byte poison string with a
+ * value of "SBAIOMMU POISON\0" for spill-over poisoning.
+ */
+
+/********** fs/jbd/journal.c **********/
+#define JBD_POISON_FREE		0x5b
+#define JBD2_POISON_FREE	0x5c
+
+/********** drivers/base/dmapool.c **********/
+#define	POOL_POISON_FREED	0xa7	/* !inuse */
+#define	POOL_POISON_ALLOCATED	0xa9	/* !initted */
+
+/********** drivers/atm/ **********/
+#define ATM_POISON_FREE		0x12
+#define ATM_POISON		0xdeadbeef
+
+/********** net/ **********/
+#define NEIGHBOR_DEAD		0xdeadbeef
+#define NETFILTER_LINK_POISON	0xdead57ac
+
+/********** kernel/mutexes **********/
+#define MUTEX_DEBUG_INIT	0x11
+#define MUTEX_DEBUG_FREE	0x22
+
+/********** lib/flex_array.c **********/
+#define FLEX_ARRAY_FREE	0x6c	/* for use-after-free poisoning */
+
+/********** security/ **********/
+#define KEY_DESTROY		0xbd
+
+/********** sound/oss/ **********/
+#define OSS_POISON_FREE		0xAB
+
+#endif
diff --git a/include/linux/poll.h b/include/linux/poll.h
new file mode 100644
index 00000000..48fe8bc3
--- /dev/null
+++ b/include/linux/poll.h
@@ -0,0 +1,168 @@
+#ifndef _LINUX_POLL_H
+#define _LINUX_POLL_H
+
+#include <asm/poll.h>
+
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/ktime.h>
+#include <linux/wait.h>
+#include <linux/string.h>
+#include <linux/fs.h>
+#include <linux/sysctl.h>
+#include <asm/uaccess.h>
+
+extern struct ctl_table epoll_table[]; /* for sysctl */
+/* ~832 bytes of stack space used max in sys_select/sys_poll before allocating
+   additional memory. */
+#define MAX_STACK_ALLOC 832
+#define FRONTEND_STACK_ALLOC	256
+#define SELECT_STACK_ALLOC	FRONTEND_STACK_ALLOC
+#define POLL_STACK_ALLOC	FRONTEND_STACK_ALLOC
+#define WQUEUES_STACK_ALLOC	(MAX_STACK_ALLOC - FRONTEND_STACK_ALLOC)
+#define N_INLINE_POLL_ENTRIES	(WQUEUES_STACK_ALLOC / sizeof(struct poll_table_entry))
+
+#define DEFAULT_POLLMASK (POLLIN | POLLOUT | POLLRDNORM | POLLWRNORM)
+
+struct poll_table_struct;
+
+/* 
+ * structures and helpers for f_op->poll implementations
+ */
+typedef void (*poll_queue_proc)(struct file *, wait_queue_head_t *, struct poll_table_struct *);
+
+/*
+ * Do not touch the structure directly, use the access functions
+ * poll_does_not_wait() and poll_requested_events() instead.
+ */
+typedef struct poll_table_struct {
+	poll_queue_proc _qproc;
+	unsigned long _key;
+} poll_table;
+
+static inline void poll_wait(struct file * filp, wait_queue_head_t * wait_address, poll_table *p)
+{
+	if (p && p->_qproc && wait_address)
+		p->_qproc(filp, wait_address, p);
+}
+
+/*
+ * Return true if it is guaranteed that poll will not wait. This is the case
+ * if the poll() of another file descriptor in the set got an event, so there
+ * is no need for waiting.
+ */
+static inline bool poll_does_not_wait(const poll_table *p)
+{
+	return p == NULL || p->_qproc == NULL;
+}
+
+/*
+ * Return the set of events that the application wants to poll for.
+ * This is useful for drivers that need to know whether a DMA transfer has
+ * to be started implicitly on poll(). You typically only want to do that
+ * if the application is actually polling for POLLIN and/or POLLOUT.
+ */
+static inline unsigned long poll_requested_events(const poll_table *p)
+{
+	return p ? p->_key : ~0UL;
+}
+
+static inline void init_poll_funcptr(poll_table *pt, poll_queue_proc qproc)
+{
+	pt->_qproc = qproc;
+	pt->_key   = ~0UL; /* all events enabled */
+}
+
+struct poll_table_entry {
+	struct file *filp;
+	unsigned long key;
+	wait_queue_t wait;
+	wait_queue_head_t *wait_address;
+};
+
+/*
+ * Structures and helpers for select/poll syscall
+ */
+struct poll_wqueues {
+	poll_table pt;
+	struct poll_table_page *table;
+	struct task_struct *polling_task;
+	int triggered;
+	int error;
+	int inline_index;
+	struct poll_table_entry inline_entries[N_INLINE_POLL_ENTRIES];
+};
+
+extern void poll_initwait(struct poll_wqueues *pwq);
+extern void poll_freewait(struct poll_wqueues *pwq);
+extern int poll_schedule_timeout(struct poll_wqueues *pwq, int state,
+				 ktime_t *expires, unsigned long slack);
+extern long select_estimate_accuracy(struct timespec *tv);
+
+
+static inline int poll_schedule(struct poll_wqueues *pwq, int state)
+{
+	return poll_schedule_timeout(pwq, state, NULL, 0);
+}
+
+/*
+ * Scalable version of the fd_set.
+ */
+
+typedef struct {
+	unsigned long *in, *out, *ex;
+	unsigned long *res_in, *res_out, *res_ex;
+} fd_set_bits;
+
+/*
+ * How many longwords for "nr" bits?
+ */
+#define FDS_BITPERLONG	(8*sizeof(long))
+#define FDS_LONGS(nr)	(((nr)+FDS_BITPERLONG-1)/FDS_BITPERLONG)
+#define FDS_BYTES(nr)	(FDS_LONGS(nr)*sizeof(long))
+
+/*
+ * We do a VERIFY_WRITE here even though we are only reading this time:
+ * we'll write to it eventually..
+ *
+ * Use "unsigned long" accesses to let user-mode fd_set's be long-aligned.
+ */
+static inline
+int get_fd_set(unsigned long nr, void __user *ufdset, unsigned long *fdset)
+{
+	nr = FDS_BYTES(nr);
+	if (ufdset)
+		return copy_from_user(fdset, ufdset, nr) ? -EFAULT : 0;
+
+	memset(fdset, 0, nr);
+	return 0;
+}
+
+static inline unsigned long __must_check
+set_fd_set(unsigned long nr, void __user *ufdset, unsigned long *fdset)
+{
+	if (ufdset)
+		return __copy_to_user(ufdset, fdset, FDS_BYTES(nr));
+	return 0;
+}
+
+static inline
+void zero_fd_set(unsigned long nr, unsigned long *fdset)
+{
+	memset(fdset, 0, FDS_BYTES(nr));
+}
+
+#define MAX_INT64_SECONDS (((s64)(~((u64)0)>>1)/HZ)-1)
+
+extern int do_select(int n, fd_set_bits *fds, struct timespec *end_time);
+extern int do_sys_poll(struct pollfd __user * ufds, unsigned int nfds,
+		       struct timespec *end_time);
+extern int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp,
+			   fd_set __user *exp, struct timespec *end_time);
+
+extern int poll_select_set_timeout(struct timespec *to, long sec, long nsec);
+
+#endif /* KERNEL */
+
+#endif /* _LINUX_POLL_H */
diff --git a/include/linux/posix-clock.h b/include/linux/posix-clock.h
new file mode 100644
index 00000000..34c4498b
--- /dev/null
+++ b/include/linux/posix-clock.h
@@ -0,0 +1,151 @@
+/*
+ * posix-clock.h - support for dynamic clock devices
+ *
+ * Copyright (C) 2010 OMICRON electronics GmbH
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef _LINUX_POSIX_CLOCK_H_
+#define _LINUX_POSIX_CLOCK_H_
+
+#include <linux/cdev.h>
+#include <linux/fs.h>
+#include <linux/poll.h>
+#include <linux/posix-timers.h>
+#include <linux/rwsem.h>
+
+struct posix_clock;
+
+/**
+ * struct posix_clock_operations - functional interface to the clock
+ *
+ * Every posix clock is represented by a character device. Drivers may
+ * optionally offer extended capabilities by implementing the
+ * character device methods. The character device file operations are
+ * first handled by the clock device layer, then passed on to the
+ * driver by calling these functions.
+ *
+ * @owner:          The clock driver should set to THIS_MODULE
+ * @clock_adjtime:  Adjust the clock
+ * @clock_gettime:  Read the current time
+ * @clock_getres:   Get the clock resolution
+ * @clock_settime:  Set the current time value
+ * @timer_create:   Create a new timer
+ * @timer_delete:   Remove a previously created timer
+ * @timer_gettime:  Get remaining time and interval of a timer
+ * @timer_settime: Set a timer's initial expiration and interval
+ * @fasync:         Optional character device fasync method
+ * @mmap:           Optional character device mmap method
+ * @open:           Optional character device open method
+ * @release:        Optional character device release method
+ * @ioctl:          Optional character device ioctl method
+ * @read:           Optional character device read method
+ * @poll:           Optional character device poll method
+ */
+struct posix_clock_operations {
+	struct module *owner;
+
+	int  (*clock_adjtime)(struct posix_clock *pc, struct timex *tx);
+
+	int  (*clock_gettime)(struct posix_clock *pc, struct timespec *ts);
+
+	int  (*clock_getres) (struct posix_clock *pc, struct timespec *ts);
+
+	int  (*clock_settime)(struct posix_clock *pc,
+			      const struct timespec *ts);
+
+	int  (*timer_create) (struct posix_clock *pc, struct k_itimer *kit);
+
+	int  (*timer_delete) (struct posix_clock *pc, struct k_itimer *kit);
+
+	void (*timer_gettime)(struct posix_clock *pc,
+			      struct k_itimer *kit, struct itimerspec *tsp);
+
+	int  (*timer_settime)(struct posix_clock *pc,
+			      struct k_itimer *kit, int flags,
+			      struct itimerspec *tsp, struct itimerspec *old);
+	/*
+	 * Optional character device methods:
+	 */
+	int     (*fasync)  (struct posix_clock *pc,
+			    int fd, struct file *file, int on);
+
+	long    (*ioctl)   (struct posix_clock *pc,
+			    unsigned int cmd, unsigned long arg);
+
+	int     (*mmap)    (struct posix_clock *pc,
+			    struct vm_area_struct *vma);
+
+	int     (*open)    (struct posix_clock *pc, fmode_t f_mode);
+
+	uint    (*poll)    (struct posix_clock *pc,
+			    struct file *file, poll_table *wait);
+
+	int     (*release) (struct posix_clock *pc);
+
+	ssize_t (*read)    (struct posix_clock *pc,
+			    uint flags, char __user *buf, size_t cnt);
+};
+
+/**
+ * struct posix_clock - represents a dynamic posix clock
+ *
+ * @ops:     Functional interface to the clock
+ * @cdev:    Character device instance for this clock
+ * @kref:    Reference count.
+ * @rwsem:   Protects the 'zombie' field from concurrent access.
+ * @zombie:  If 'zombie' is true, then the hardware has disappeared.
+ * @release: A function to free the structure when the reference count reaches
+ *           zero. May be NULL if structure is statically allocated.
+ *
+ * Drivers should embed their struct posix_clock within a private
+ * structure, obtaining a reference to it during callbacks using
+ * container_of().
+ */
+struct posix_clock {
+	struct posix_clock_operations ops;
+	struct cdev cdev;
+	struct kref kref;
+	struct rw_semaphore rwsem;
+	bool zombie;
+	void (*release)(struct posix_clock *clk);
+};
+
+/**
+ * posix_clock_register() - register a new clock
+ * @clk:   Pointer to the clock. Caller must provide 'ops' and 'release'
+ * @devid: Allocated device id
+ *
+ * A clock driver calls this function to register itself with the
+ * clock device subsystem. If 'clk' points to dynamically allocated
+ * memory, then the caller must provide a 'release' function to free
+ * that memory.
+ *
+ * Returns zero on success, non-zero otherwise.
+ */
+int posix_clock_register(struct posix_clock *clk, dev_t devid);
+
+/**
+ * posix_clock_unregister() - unregister a clock
+ * @clk: Clock instance previously registered via posix_clock_register()
+ *
+ * A clock driver calls this function to remove itself from the clock
+ * device subsystem. The posix_clock itself will remain (in an
+ * inactive state) until its reference count drops to zero, at which
+ * point it will be deallocated with its 'release' method.
+ */
+void posix_clock_unregister(struct posix_clock *clk);
+
+#endif
diff --git a/include/linux/posix-timers.h b/include/linux/posix-timers.h
new file mode 100644
index 00000000..042058fd
--- /dev/null
+++ b/include/linux/posix-timers.h
@@ -0,0 +1,132 @@
+#ifndef _linux_POSIX_TIMERS_H
+#define _linux_POSIX_TIMERS_H
+
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/sched.h>
+#include <linux/timex.h>
+#include <linux/alarmtimer.h>
+
+union cpu_time_count {
+	cputime_t cpu;
+	unsigned long long sched;
+};
+
+struct cpu_timer_list {
+	struct list_head entry;
+	union cpu_time_count expires, incr;
+	struct task_struct *task;
+	int firing;
+};
+
+/*
+ * Bit fields within a clockid:
+ *
+ * The most significant 29 bits hold either a pid or a file descriptor.
+ *
+ * Bit 2 indicates whether a cpu clock refers to a thread or a process.
+ *
+ * Bits 1 and 0 give the type: PROF=0, VIRT=1, SCHED=2, or FD=3.
+ *
+ * A clockid is invalid if bits 2, 1, and 0 are all set.
+ */
+#define CPUCLOCK_PID(clock)		((pid_t) ~((clock) >> 3))
+#define CPUCLOCK_PERTHREAD(clock) \
+	(((clock) & (clockid_t) CPUCLOCK_PERTHREAD_MASK) != 0)
+
+#define CPUCLOCK_PERTHREAD_MASK	4
+#define CPUCLOCK_WHICH(clock)	((clock) & (clockid_t) CPUCLOCK_CLOCK_MASK)
+#define CPUCLOCK_CLOCK_MASK	3
+#define CPUCLOCK_PROF		0
+#define CPUCLOCK_VIRT		1
+#define CPUCLOCK_SCHED		2
+#define CPUCLOCK_MAX		3
+#define CLOCKFD			CPUCLOCK_MAX
+#define CLOCKFD_MASK		(CPUCLOCK_PERTHREAD_MASK|CPUCLOCK_CLOCK_MASK)
+
+#define MAKE_PROCESS_CPUCLOCK(pid, clock) \
+	((~(clockid_t) (pid) << 3) | (clockid_t) (clock))
+#define MAKE_THREAD_CPUCLOCK(tid, clock) \
+	MAKE_PROCESS_CPUCLOCK((tid), (clock) | CPUCLOCK_PERTHREAD_MASK)
+
+#define FD_TO_CLOCKID(fd)	((~(clockid_t) (fd) << 3) | CLOCKFD)
+#define CLOCKID_TO_FD(clk)	((unsigned int) ~((clk) >> 3))
+
+/* POSIX.1b interval timer structure. */
+struct k_itimer {
+	struct list_head list;		/* free/ allocate list */
+	spinlock_t it_lock;
+	clockid_t it_clock;		/* which timer type */
+	timer_t it_id;			/* timer id */
+	int it_overrun;			/* overrun on pending signal  */
+	int it_overrun_last;		/* overrun on last delivered signal */
+	int it_requeue_pending;		/* waiting to requeue this timer */
+#define REQUEUE_PENDING 1
+	int it_sigev_notify;		/* notify word of sigevent struct */
+	struct signal_struct *it_signal;
+	union {
+		struct pid *it_pid;	/* pid of process to send signal to */
+		struct task_struct *it_process;	/* for clock_nanosleep */
+	};
+	struct sigqueue *sigq;		/* signal queue entry. */
+	union {
+		struct {
+			struct hrtimer timer;
+			ktime_t interval;
+		} real;
+		struct cpu_timer_list cpu;
+		struct {
+			unsigned int clock;
+			unsigned int node;
+			unsigned long incr;
+			unsigned long expires;
+		} mmtimer;
+		struct {
+			struct alarm alarmtimer;
+			ktime_t interval;
+		} alarm;
+		struct rcu_head rcu;
+	} it;
+};
+
+struct k_clock {
+	int (*clock_getres) (const clockid_t which_clock, struct timespec *tp);
+	int (*clock_set) (const clockid_t which_clock,
+			  const struct timespec *tp);
+	int (*clock_get) (const clockid_t which_clock, struct timespec * tp);
+	int (*clock_adj) (const clockid_t which_clock, struct timex *tx);
+	int (*timer_create) (struct k_itimer *timer);
+	int (*nsleep) (const clockid_t which_clock, int flags,
+		       struct timespec *, struct timespec __user *);
+	long (*nsleep_restart) (struct restart_block *restart_block);
+	int (*timer_set) (struct k_itimer * timr, int flags,
+			  struct itimerspec * new_setting,
+			  struct itimerspec * old_setting);
+	int (*timer_del) (struct k_itimer * timr);
+#define TIMER_RETRY 1
+	void (*timer_get) (struct k_itimer * timr,
+			   struct itimerspec * cur_setting);
+};
+
+extern struct k_clock clock_posix_cpu;
+extern struct k_clock clock_posix_dynamic;
+
+void posix_timers_register_clock(const clockid_t clock_id, struct k_clock *new_clock);
+
+/* function to call to trigger timer event */
+int posix_timer_event(struct k_itimer *timr, int si_private);
+
+void posix_cpu_timer_schedule(struct k_itimer *timer);
+
+void run_posix_cpu_timers(struct task_struct *task);
+void posix_cpu_timers_exit(struct task_struct *task);
+void posix_cpu_timers_exit_group(struct task_struct *task);
+
+void set_process_cpu_timer(struct task_struct *task, unsigned int clock_idx,
+			   cputime_t *newval, cputime_t *oldval);
+
+long clock_nanosleep_restart(struct restart_block *restart_block);
+
+void update_rlimit_cpu(struct task_struct *task, unsigned long rlim_new);
+
+#endif
diff --git a/include/linux/posix_acl.h b/include/linux/posix_acl.h
new file mode 100644
index 00000000..11bad91c
--- /dev/null
+++ b/include/linux/posix_acl.h
@@ -0,0 +1,172 @@
+/*
+  File: linux/posix_acl.h
+
+  (C) 2002 Andreas Gruenbacher, <a.gruenbacher@computer.org>
+*/
+
+
+#ifndef __LINUX_POSIX_ACL_H
+#define __LINUX_POSIX_ACL_H
+
+#include <linux/bug.h>
+#include <linux/slab.h>
+#include <linux/rcupdate.h>
+
+#define ACL_UNDEFINED_ID	(-1)
+
+/* a_type field in acl_user_posix_entry_t */
+#define ACL_TYPE_ACCESS		(0x8000)
+#define ACL_TYPE_DEFAULT	(0x4000)
+
+/* e_tag entry in struct posix_acl_entry */
+#define ACL_USER_OBJ		(0x01)
+#define ACL_USER		(0x02)
+#define ACL_GROUP_OBJ		(0x04)
+#define ACL_GROUP		(0x08)
+#define ACL_MASK		(0x10)
+#define ACL_OTHER		(0x20)
+
+/* permissions in the e_perm field */
+#define ACL_READ		(0x04)
+#define ACL_WRITE		(0x02)
+#define ACL_EXECUTE		(0x01)
+//#define ACL_ADD		(0x08)
+//#define ACL_DELETE		(0x10)
+
+struct posix_acl_entry {
+	short			e_tag;
+	unsigned short		e_perm;
+	unsigned int		e_id;
+};
+
+struct posix_acl {
+	union {
+		atomic_t		a_refcount;
+		struct rcu_head		a_rcu;
+	};
+	unsigned int		a_count;
+	struct posix_acl_entry	a_entries[0];
+};
+
+#define FOREACH_ACL_ENTRY(pa, acl, pe) \
+	for(pa=(acl)->a_entries, pe=pa+(acl)->a_count; pa<pe; pa++)
+
+
+/*
+ * Duplicate an ACL handle.
+ */
+static inline struct posix_acl *
+posix_acl_dup(struct posix_acl *acl)
+{
+	if (acl)
+		atomic_inc(&acl->a_refcount);
+	return acl;
+}
+
+/*
+ * Free an ACL handle.
+ */
+static inline void
+posix_acl_release(struct posix_acl *acl)
+{
+	if (acl && atomic_dec_and_test(&acl->a_refcount))
+		kfree_rcu(acl, a_rcu);
+}
+
+
+/* posix_acl.c */
+
+extern void posix_acl_init(struct posix_acl *, int);
+extern struct posix_acl *posix_acl_alloc(int, gfp_t);
+extern int posix_acl_valid(const struct posix_acl *);
+extern int posix_acl_permission(struct inode *, const struct posix_acl *, int);
+extern struct posix_acl *posix_acl_from_mode(umode_t, gfp_t);
+extern int posix_acl_equiv_mode(const struct posix_acl *, umode_t *);
+extern int posix_acl_create(struct posix_acl **, gfp_t, umode_t *);
+extern int posix_acl_chmod(struct posix_acl **, gfp_t, umode_t);
+
+extern struct posix_acl *get_posix_acl(struct inode *, int);
+extern int set_posix_acl(struct inode *, int, struct posix_acl *);
+
+#ifdef CONFIG_FS_POSIX_ACL
+static inline struct posix_acl **acl_by_type(struct inode *inode, int type)
+{
+	switch (type) {
+	case ACL_TYPE_ACCESS:
+		return &inode->i_acl;
+	case ACL_TYPE_DEFAULT:
+		return &inode->i_default_acl;
+	default:
+		BUG();
+	}
+}
+
+static inline struct posix_acl *get_cached_acl(struct inode *inode, int type)
+{
+	struct posix_acl **p = acl_by_type(inode, type);
+	struct posix_acl *acl = ACCESS_ONCE(*p);
+	if (acl) {
+		spin_lock(&inode->i_lock);
+		acl = *p;
+		if (acl != ACL_NOT_CACHED)
+			acl = posix_acl_dup(acl);
+		spin_unlock(&inode->i_lock);
+	}
+	return acl;
+}
+
+static inline struct posix_acl *get_cached_acl_rcu(struct inode *inode, int type)
+{
+	return rcu_dereference(*acl_by_type(inode, type));
+}
+
+static inline void set_cached_acl(struct inode *inode,
+				  int type,
+				  struct posix_acl *acl)
+{
+	struct posix_acl **p = acl_by_type(inode, type);
+	struct posix_acl *old;
+	spin_lock(&inode->i_lock);
+	old = *p;
+	rcu_assign_pointer(*p, posix_acl_dup(acl));
+	spin_unlock(&inode->i_lock);
+	if (old != ACL_NOT_CACHED)
+		posix_acl_release(old);
+}
+
+static inline void forget_cached_acl(struct inode *inode, int type)
+{
+	struct posix_acl **p = acl_by_type(inode, type);
+	struct posix_acl *old;
+	spin_lock(&inode->i_lock);
+	old = *p;
+	*p = ACL_NOT_CACHED;
+	spin_unlock(&inode->i_lock);
+	if (old != ACL_NOT_CACHED)
+		posix_acl_release(old);
+}
+
+static inline void forget_all_cached_acls(struct inode *inode)
+{
+	struct posix_acl *old_access, *old_default;
+	spin_lock(&inode->i_lock);
+	old_access = inode->i_acl;
+	old_default = inode->i_default_acl;
+	inode->i_acl = inode->i_default_acl = ACL_NOT_CACHED;
+	spin_unlock(&inode->i_lock);
+	if (old_access != ACL_NOT_CACHED)
+		posix_acl_release(old_access);
+	if (old_default != ACL_NOT_CACHED)
+		posix_acl_release(old_default);
+}
+#endif
+
+static inline void cache_no_acl(struct inode *inode)
+{
+#ifdef CONFIG_FS_POSIX_ACL
+	inode->i_acl = NULL;
+	inode->i_default_acl = NULL;
+#endif
+}
+
+#endif  /* __LINUX_POSIX_ACL_H */
diff --git a/include/linux/posix_acl_xattr.h b/include/linux/posix_acl_xattr.h
new file mode 100644
index 00000000..6e53c340
--- /dev/null
+++ b/include/linux/posix_acl_xattr.h
@@ -0,0 +1,58 @@
+/*
+  File: linux/posix_acl_xattr.h
+
+  Extended attribute system call representation of Access Control Lists.
+
+  Copyright (C) 2000 by Andreas Gruenbacher <a.gruenbacher@computer.org>
+  Copyright (C) 2002 SGI - Silicon Graphics, Inc <linux-xfs@oss.sgi.com>
+ */
+#ifndef _POSIX_ACL_XATTR_H
+#define _POSIX_ACL_XATTR_H
+
+#include <linux/posix_acl.h>
+
+/* Extended attribute names */
+#define POSIX_ACL_XATTR_ACCESS	"system.posix_acl_access"
+#define POSIX_ACL_XATTR_DEFAULT	"system.posix_acl_default"
+
+/* Supported ACL a_version fields */
+#define POSIX_ACL_XATTR_VERSION	0x0002
+
+
+/* An undefined entry e_id value */
+#define ACL_UNDEFINED_ID	(-1)
+
+typedef struct {
+	__le16			e_tag;
+	__le16			e_perm;
+	__le32			e_id;
+} posix_acl_xattr_entry;
+
+typedef struct {
+	__le32			a_version;
+	posix_acl_xattr_entry	a_entries[0];
+} posix_acl_xattr_header;
+
+
+static inline size_t
+posix_acl_xattr_size(int count)
+{
+	return (sizeof(posix_acl_xattr_header) +
+		(count * sizeof(posix_acl_xattr_entry)));
+}
+
+static inline int
+posix_acl_xattr_count(size_t size)
+{
+	if (size < sizeof(posix_acl_xattr_header))
+		return -1;
+	size -= sizeof(posix_acl_xattr_header);
+	if (size % sizeof(posix_acl_xattr_entry))
+		return -1;
+	return size / sizeof(posix_acl_xattr_entry);
+}
+
+struct posix_acl *posix_acl_from_xattr(const void *value, size_t size);
+int posix_acl_to_xattr(const struct posix_acl *acl, void *buffer, size_t size);
+
+#endif	/* _POSIX_ACL_XATTR_H */
diff --git a/include/linux/posix_types.h b/include/linux/posix_types.h
new file mode 100644
index 00000000..f04c98cf
--- /dev/null
+++ b/include/linux/posix_types.h
@@ -0,0 +1,49 @@
+#ifndef _LINUX_POSIX_TYPES_H
+#define _LINUX_POSIX_TYPES_H
+
+#include <linux/stddef.h>
+
+/*
+ * This allows for 1024 file descriptors: if NR_OPEN is ever grown
+ * beyond that you'll have to change this too. But 1024 fd's seem to be
+ * enough even for such "real" unices like OSF/1, so hopefully this is
+ * one limit that doesn't have to be changed [again].
+ *
+ * Note that POSIX wants the FD_CLEAR(fd,fdsetp) defines to be in
+ * <sys/time.h> (and thus <linux/time.h>) - but this is a more logical
+ * place for them. Solved by having dummy defines in <sys/time.h>.
+ */
+
+/*
+ * Those macros may have been defined in <gnu/types.h>. But we always
+ * use the ones here. 
+ */
+#undef __NFDBITS
+#define __NFDBITS	(8 * sizeof(unsigned long))
+
+#undef __FD_SETSIZE
+#define __FD_SETSIZE	1024
+
+#undef __FDSET_LONGS
+#define __FDSET_LONGS	(__FD_SETSIZE/__NFDBITS)
+
+#undef __FDELT
+#define	__FDELT(d)	((d) / __NFDBITS)
+
+#undef __FDMASK
+#define	__FDMASK(d)	(1UL << ((d) % __NFDBITS))
+
+typedef struct {
+	unsigned long fds_bits [__FDSET_LONGS];
+} __kernel_fd_set;
+
+/* Type of a signal handler.  */
+typedef void (*__kernel_sighandler_t)(int);
+
+/* Type of a SYSV IPC key.  */
+typedef int __kernel_key_t;
+typedef int __kernel_mqd_t;
+
+#include <asm/posix_types.h>
+
+#endif /* _LINUX_POSIX_TYPES_H */
diff --git a/include/linux/power/bq27x00_battery.h b/include/linux/power/bq27x00_battery.h
new file mode 100644
index 00000000..a857f719
--- /dev/null
+++ b/include/linux/power/bq27x00_battery.h
@@ -0,0 +1,19 @@
+#ifndef __LINUX_BQ27X00_BATTERY_H__
+#define __LINUX_BQ27X00_BATTERY_H__
+
+/**
+ * struct bq27000_plaform_data - Platform data for bq27000 devices
+ * @name: Name of the battery. If NULL the driver will fallback to "bq27000".
+ * @read: HDQ read callback.
+ *	This function should provide access to the HDQ bus the battery is
+ *	connected to.
+ *	The first parameter is a pointer to the battery device, the second the
+ *	register to be read. The return value should either be the content of
+ *	the passed register or an error value.
+ */
+struct bq27000_platform_data {
+	const char *name;
+	int (*read)(struct device *dev, unsigned int);
+};
+
+#endif
diff --git a/include/linux/power/charger-manager.h b/include/linux/power/charger-manager.h
new file mode 100644
index 00000000..4f75e531
--- /dev/null
+++ b/include/linux/power/charger-manager.h
@@ -0,0 +1,147 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ * MyungJoo.Ham <myungjoo.ham@samsung.com>
+ *
+ * Charger Manager.
+ * This framework enables to control and multiple chargers and to
+ * monitor charging even in the context of suspend-to-RAM with
+ * an interface combining the chargers.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+**/
+
+#ifndef _CHARGER_MANAGER_H
+#define _CHARGER_MANAGER_H
+
+#include <linux/power_supply.h>
+
+enum data_source {
+	CM_FUEL_GAUGE,
+	CM_CHARGER_STAT,
+};
+
+enum polling_modes {
+	CM_POLL_DISABLE = 0,
+	CM_POLL_ALWAYS,
+	CM_POLL_EXTERNAL_POWER_ONLY,
+	CM_POLL_CHARGING_ONLY,
+};
+
+/**
+ * struct charger_global_desc
+ * @rtc_name: the name of RTC used to wake up the system from suspend.
+ * @rtc_only_wakeup:
+ *	If the system is woken up by waekup-sources other than the RTC or
+ *	callbacks, Charger Manager should recognize with
+ *	rtc_only_wakeup() returning false.
+ *	If the RTC given to CM is the only wakeup reason,
+ *	rtc_only_wakeup should return true.
+ */
+struct charger_global_desc {
+	char *rtc_name;
+
+	bool (*rtc_only_wakeup)(void);
+};
+
+/**
+ * struct charger_desc
+ * @psy_name: the name of power-supply-class for charger manager
+ * @polling_mode:
+ *	Determine which polling mode will be used
+ * @fullbatt_uV: voltage in microvolt
+ *	If it is not being charged and VBATT >= fullbatt_uV,
+ *	it is assumed to be full.
+ * @polling_interval_ms: interval in millisecond at which
+ *	charger manager will monitor battery health
+ * @battery_present:
+ *	Specify where information for existance of battery can be obtained
+ * @psy_charger_stat: the names of power-supply for chargers
+ * @num_charger_regulator: the number of entries in charger_regulators
+ * @charger_regulators: array of regulator_bulk_data for chargers
+ * @psy_fuel_gauge: the name of power-supply for fuel gauge
+ * @temperature_out_of_range:
+ *	Determine whether the status is overheat or cold or normal.
+ *	return_value > 0: overheat
+ *	return_value == 0: normal
+ *	return_value < 0: cold
+ * @measure_battery_temp:
+ *	true: measure battery temperature
+ *	false: measure ambient temperature
+ */
+struct charger_desc {
+	char *psy_name;
+
+	enum polling_modes polling_mode;
+	unsigned int polling_interval_ms;
+
+	unsigned int fullbatt_uV;
+
+	enum data_source battery_present;
+
+	char **psy_charger_stat;
+
+	int num_charger_regulators;
+	struct regulator_bulk_data *charger_regulators;
+
+	char *psy_fuel_gauge;
+
+	int (*temperature_out_of_range)(int *mC);
+	bool measure_battery_temp;
+};
+
+#define PSY_NAME_MAX	30
+
+/**
+ * struct charger_manager
+ * @entry: entry for list
+ * @dev: device pointer
+ * @desc: instance of charger_desc
+ * @fuel_gauge: power_supply for fuel gauge
+ * @charger_stat: array of power_supply for chargers
+ * @charger_enabled: the state of charger
+ * @emergency_stop:
+ *	When setting true, stop charging
+ * @last_temp_mC: the measured temperature in milli-Celsius
+ * @psy_name_buf: the name of power-supply-class for charger manager
+ * @charger_psy: power_supply for charger manager
+ * @status_save_ext_pwr_inserted:
+ *	saved status of external power before entering suspend-to-RAM
+ * @status_save_batt:
+ *	saved status of battery before entering suspend-to-RAM
+ */
+struct charger_manager {
+	struct list_head entry;
+	struct device *dev;
+	struct charger_desc *desc;
+
+	struct power_supply *fuel_gauge;
+	struct power_supply **charger_stat;
+
+	bool charger_enabled;
+
+	int emergency_stop;
+	int last_temp_mC;
+
+	char psy_name_buf[PSY_NAME_MAX + 1];
+	struct power_supply charger_psy;
+
+	bool status_save_ext_pwr_inserted;
+	bool status_save_batt;
+};
+
+#ifdef CONFIG_CHARGER_MANAGER
+extern int setup_charger_manager(struct charger_global_desc *gd);
+extern bool cm_suspend_again(void);
+#else
+static void __maybe_unused setup_charger_manager(struct charger_global_desc *gd)
+{ }
+
+static bool __maybe_unused cm_suspend_again(void)
+{
+	return false;
+}
+#endif
+
+#endif /* _CHARGER_MANAGER_H */
diff --git a/include/linux/power/gpio-charger.h b/include/linux/power/gpio-charger.h
new file mode 100644
index 00000000..de1dfe09
--- /dev/null
+++ b/include/linux/power/gpio-charger.h
@@ -0,0 +1,41 @@
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __LINUX_POWER_GPIO_CHARGER_H__
+#define __LINUX_POWER_GPIO_CHARGER_H__
+
+#include <linux/power_supply.h>
+#include <linux/types.h>
+
+/**
+ * struct gpio_charger_platform_data - platform_data for gpio_charger devices
+ * @name:		Name for the chargers power_supply device
+ * @type:		Type of the charger
+ * @gpio:		GPIO which is used to indicate the chargers status
+ * @gpio_active_low:	Should be set to 1 if the GPIO is active low otherwise 0
+ * @supplied_to:	Array of battery names to which this chargers supplies power
+ * @num_supplicants:	Number of entries in the supplied_to array
+ */
+struct gpio_charger_platform_data {
+	const char *name;
+	enum power_supply_type type;
+
+	int gpio;
+	int gpio_active_low;
+
+	char **supplied_to;
+	size_t num_supplicants;
+};
+
+#endif
diff --git a/include/linux/power/isp1704_charger.h b/include/linux/power/isp1704_charger.h
new file mode 100644
index 00000000..68096a6a
--- /dev/null
+++ b/include/linux/power/isp1704_charger.h
@@ -0,0 +1,29 @@
+/*
+ * ISP1704 USB Charger Detection driver
+ *
+ * Copyright (C) 2011 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+
+#ifndef __ISP1704_CHARGER_H
+#define __ISP1704_CHARGER_H
+
+struct isp1704_charger_data {
+	void		(*set_power)(bool on);
+};
+
+#endif
diff --git a/include/linux/power/jz4740-battery.h b/include/linux/power/jz4740-battery.h
new file mode 100644
index 00000000..19c9610c
--- /dev/null
+++ b/include/linux/power/jz4740-battery.h
@@ -0,0 +1,24 @@
+/*
+ *  Copyright (C) 2009, Jiejing Zhang <kzjeef@gmail.com>
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __JZ4740_BATTERY_H
+#define __JZ4740_BATTERY_H
+
+struct jz_battery_platform_data {
+	struct power_supply_info info;
+	int gpio_charge;	/* GPIO port of Charger state */
+	int gpio_charge_active_low;
+};
+
+#endif
diff --git a/include/linux/power/max17042_battery.h b/include/linux/power/max17042_battery.h
new file mode 100644
index 00000000..e01b167e
--- /dev/null
+++ b/include/linux/power/max17042_battery.h
@@ -0,0 +1,196 @@
+/*
+ * Fuel gauge driver for Maxim 17042 / 8966 / 8997
+ *  Note that Maxim 8966 and 8997 are mfd and this is its subdevice.
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ * MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __MAX17042_BATTERY_H_
+#define __MAX17042_BATTERY_H_
+
+#define MAX17042_STATUS_BattAbsent	(1 << 3)
+#define MAX17042_BATTERY_FULL	(100)
+#define MAX17042_DEFAULT_SNS_RESISTOR	(10000)
+
+#define MAX17042_CHARACTERIZATION_DATA_SIZE 48
+
+enum max17042_register {
+	MAX17042_STATUS		= 0x00,
+	MAX17042_VALRT_Th	= 0x01,
+	MAX17042_TALRT_Th	= 0x02,
+	MAX17042_SALRT_Th	= 0x03,
+	MAX17042_AtRate		= 0x04,
+	MAX17042_RepCap		= 0x05,
+	MAX17042_RepSOC		= 0x06,
+	MAX17042_Age		= 0x07,
+	MAX17042_TEMP		= 0x08,
+	MAX17042_VCELL		= 0x09,
+	MAX17042_Current	= 0x0A,
+	MAX17042_AvgCurrent	= 0x0B,
+
+	MAX17042_SOC		= 0x0D,
+	MAX17042_AvSOC		= 0x0E,
+	MAX17042_RemCap		= 0x0F,
+	MAX17042_FullCAP	= 0x10,
+	MAX17042_TTE		= 0x11,
+	MAX17042_V_empty	= 0x12,
+
+	MAX17042_RSLOW		= 0x14,
+
+	MAX17042_AvgTA		= 0x16,
+	MAX17042_Cycles		= 0x17,
+	MAX17042_DesignCap	= 0x18,
+	MAX17042_AvgVCELL	= 0x19,
+	MAX17042_MinMaxTemp	= 0x1A,
+	MAX17042_MinMaxVolt	= 0x1B,
+	MAX17042_MinMaxCurr	= 0x1C,
+	MAX17042_CONFIG		= 0x1D,
+	MAX17042_ICHGTerm	= 0x1E,
+	MAX17042_AvCap		= 0x1F,
+	MAX17042_ManName	= 0x20,
+	MAX17042_DevName	= 0x21,
+
+	MAX17042_FullCAPNom	= 0x23,
+	MAX17042_TempNom	= 0x24,
+	MAX17042_TempLim	= 0x25,
+	MAX17042_TempHot	= 0x26,
+	MAX17042_AIN		= 0x27,
+	MAX17042_LearnCFG	= 0x28,
+	MAX17042_FilterCFG	= 0x29,
+	MAX17042_RelaxCFG	= 0x2A,
+	MAX17042_MiscCFG	= 0x2B,
+	MAX17042_TGAIN		= 0x2C,
+	MAx17042_TOFF		= 0x2D,
+	MAX17042_CGAIN		= 0x2E,
+	MAX17042_COFF		= 0x2F,
+
+	MAX17042_MaskSOC	= 0x32,
+	MAX17042_SOC_empty	= 0x33,
+	MAX17042_T_empty	= 0x34,
+
+	MAX17042_FullCAP0       = 0x35,
+	MAX17042_LAvg_empty	= 0x36,
+	MAX17042_FCTC		= 0x37,
+	MAX17042_RCOMP0		= 0x38,
+	MAX17042_TempCo		= 0x39,
+	MAX17042_EmptyTempCo	= 0x3A,
+	MAX17042_K_empty0	= 0x3B,
+	MAX17042_TaskPeriod	= 0x3C,
+	MAX17042_FSTAT		= 0x3D,
+
+	MAX17042_SHDNTIMER	= 0x3F,
+
+	MAX17042_dQacc		= 0x45,
+	MAX17042_dPacc		= 0x46,
+
+	MAX17042_VFSOC0		= 0x48,
+
+	MAX17042_QH		= 0x4D,
+	MAX17042_QL		= 0x4E,
+
+	MAX17042_VFSOC0Enable	= 0x60,
+	MAX17042_MLOCKReg1	= 0x62,
+	MAX17042_MLOCKReg2	= 0x63,
+
+	MAX17042_MODELChrTbl	= 0x80,
+
+	MAX17042_OCV		= 0xEE,
+
+	MAX17042_OCVInternal	= 0xFB,
+
+	MAX17042_VFSOC		= 0xFF,
+};
+
+/*
+ * used for setting a register to a desired value
+ * addr : address for a register
+ * data : setting value for the register
+ */
+struct max17042_reg_data {
+	u8 addr;
+	u16 data;
+};
+
+struct max17042_config_data {
+	/* External current sense resistor value in milli-ohms */
+	u32	cur_sense_val;
+
+	/* A/D measurement */
+	u16	tgain;		/* 0x2C */
+	u16	toff;		/* 0x2D */
+	u16	cgain;		/* 0x2E */
+	u16	coff;		/* 0x2F */
+
+	/* Alert / Status */
+	u16	valrt_thresh;	/* 0x01 */
+	u16	talrt_thresh;	/* 0x02 */
+	u16	soc_alrt_thresh;	/* 0x03 */
+	u16	config;		/* 0x01D */
+	u16	shdntimer;	/* 0x03F */
+
+	/* App data */
+	u16	design_cap;	/* 0x18 */
+	u16	ichgt_term;	/* 0x1E */
+
+	/* MG3 config */
+	u16	at_rate;	/* 0x04 */
+	u16	learn_cfg;	/* 0x28 */
+	u16	filter_cfg;	/* 0x29 */
+	u16	relax_cfg;	/* 0x2A */
+	u16	misc_cfg;	/* 0x2B */
+	u16	masksoc;	/* 0x32 */
+
+	/* MG3 save and restore */
+	u16	fullcap;	/* 0x10 */
+	u16	fullcapnom;	/* 0x23 */
+	u16	socempty;	/* 0x33 */
+	u16	lavg_empty;	/* 0x36 */
+	u16	dqacc;		/* 0x45 */
+	u16	dpacc;		/* 0x46 */
+
+	/* Cell technology from power_supply.h */
+	u16	cell_technology;
+
+	/* Cell Data */
+	u16	vempty;		/* 0x12 */
+	u16	temp_nom;	/* 0x24 */
+	u16	temp_lim;	/* 0x25 */
+	u16	fctc;		/* 0x37 */
+	u16	rcomp0;		/* 0x38 */
+	u16	tcompc0;	/* 0x39 */
+	u16	empty_tempco;	/* 0x3A */
+	u16	kempty0;	/* 0x3B */
+	u16	cell_char_tbl[MAX17042_CHARACTERIZATION_DATA_SIZE];
+} __packed;
+
+struct max17042_platform_data {
+	struct max17042_reg_data *init_data;
+	struct max17042_config_data *config_data;
+	int num_init_data; /* Number of enties in init_data array */
+	bool enable_current_sense;
+	bool enable_por_init; /* Use POR init from Maxim appnote */
+
+	/*
+	 * R_sns in micro-ohms.
+	 * default 10000 (if r_sns = 0) as it is the recommended value by
+	 * the datasheet although it can be changed by board designers.
+	 */
+	unsigned int r_sns;
+};
+
+#endif /* __MAX17042_BATTERY_H_ */
diff --git a/include/linux/power/max8903_charger.h b/include/linux/power/max8903_charger.h
new file mode 100644
index 00000000..24f51db8
--- /dev/null
+++ b/include/linux/power/max8903_charger.h
@@ -0,0 +1,57 @@
+/*
+ * max8903_charger.h - Maxim 8903 USB/Adapter Charger Driver
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ * MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef __MAX8903_CHARGER_H__
+#define __MAX8903_CHARGER_H__
+
+struct max8903_pdata {
+	/*
+	 * GPIOs
+	 * cen, chg, flt, and usus are optional.
+	 * dok, dcm, and uok are not optional depending on the status of
+	 * dc_valid and usb_valid.
+	 */
+	int cen;	/* Charger Enable input */
+	int dok;	/* DC(Adapter) Power OK output */
+	int uok;	/* USB Power OK output */
+	int chg;	/* Charger status output */
+	int flt;	/* Fault output */
+	int dcm;	/* Current-Limit Mode input (1: DC, 2: USB) */
+	int usus;	/* USB Suspend Input (1: suspended) */
+
+	/*
+	 * DC(Adapter/TA) is wired
+	 * When dc_valid is true,
+	 *	dok and dcm should be valid.
+	 *
+	 * At least one of dc_valid or usb_valid should be true.
+	 */
+	bool dc_valid;
+	/*
+	 * USB is wired
+	 * When usb_valid is true,
+	 *	uok should be valid.
+	 */
+	bool usb_valid;
+};
+
+#endif /* __MAX8903_CHARGER_H__ */
diff --git a/include/linux/power/sbs-battery.h b/include/linux/power/sbs-battery.h
new file mode 100644
index 00000000..2b0a9d9f
--- /dev/null
+++ b/include/linux/power/sbs-battery.h
@@ -0,0 +1,42 @@
+/*
+ * Gas Gauge driver for SBS Compliant Gas Gauges
+ *
+ * Copyright (c) 2010, NVIDIA Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#ifndef __LINUX_POWER_SBS_BATTERY_H_
+#define __LINUX_POWER_SBS_BATTERY_H_
+
+#include <linux/power_supply.h>
+#include <linux/types.h>
+
+/**
+ * struct sbs_platform_data - platform data for sbs devices
+ * @battery_detect:		GPIO which is used to detect battery presence
+ * @battery_detect_present:	gpio state when battery is present (0 / 1)
+ * @i2c_retry_count:		# of times to retry on i2c IO failure
+ * @poll_retry_count:		# of times to retry looking for new status after
+ *				external change notification
+ */
+struct sbs_platform_data {
+	int battery_detect;
+	int battery_detect_present;
+	int i2c_retry_count;
+	int poll_retry_count;
+};
+
+#endif
diff --git a/include/linux/power/smb347-charger.h b/include/linux/power/smb347-charger.h
new file mode 100644
index 00000000..e9aab944
--- /dev/null
+++ b/include/linux/power/smb347-charger.h
@@ -0,0 +1,123 @@
+/*
+ * Summit Microelectronics SMB347 Battery Charger Driver
+ *
+ * Copyright (C) 2011, Intel Corporation
+ *
+ * Authors: Bruce E. Robertson <bruce.e.robertson@intel.com>
+ *          Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef SMB347_CHARGER_H
+#define SMB347_CHARGER_H
+
+#include <linux/types.h>
+#include <linux/power_supply.h>
+
+enum {
+	/* use the default compensation method */
+	SMB347_SOFT_TEMP_COMPENSATE_DEFAULT = -1,
+
+	SMB347_SOFT_TEMP_COMPENSATE_NONE,
+	SMB347_SOFT_TEMP_COMPENSATE_CURRENT,
+	SMB347_SOFT_TEMP_COMPENSATE_VOLTAGE,
+};
+
+/* Use default factory programmed value for hard/soft temperature limit */
+#define SMB347_TEMP_USE_DEFAULT		-273
+
+/*
+ * Charging enable can be controlled by software (via i2c) by
+ * smb347-charger driver or by EN pin (active low/high).
+ */
+enum smb347_chg_enable {
+	SMB347_CHG_ENABLE_SW,
+	SMB347_CHG_ENABLE_PIN_ACTIVE_LOW,
+	SMB347_CHG_ENABLE_PIN_ACTIVE_HIGH,
+};
+
+/**
+ * struct smb347_charger_platform_data - platform data for SMB347 charger
+ * @battery_info: Information about the battery
+ * @max_charge_current: maximum current (in uA) the battery can be charged
+ * @max_charge_voltage: maximum voltage (in uV) the battery can be charged
+ * @pre_charge_current: current (in uA) to use in pre-charging phase
+ * @termination_current: current (in uA) used to determine when the
+ *			 charging cycle terminates
+ * @pre_to_fast_voltage: voltage (in uV) treshold used for transitioning to
+ *			 pre-charge to fast charge mode
+ * @mains_current_limit: maximum input current drawn from AC/DC input (in uA)
+ * @usb_hc_current_limit: maximum input high current (in uA) drawn from USB
+ *			  input
+ * @chip_temp_threshold: die temperature where device starts limiting charge
+ *			 current [%100 - %130] (in degree C)
+ * @soft_cold_temp_limit: soft cold temperature limit [%0 - %15] (in degree C),
+ *			  granularity is 5 deg C.
+ * @soft_hot_temp_limit: soft hot temperature limit [%40 - %55] (in degree  C),
+ *			 granularity is 5 deg C.
+ * @hard_cold_temp_limit: hard cold temperature limit [%-5 - %10] (in degree C),
+ *			  granularity is 5 deg C.
+ * @hard_hot_temp_limit: hard hot temperature limit [%50 - %65] (in degree C),
+ *			 granularity is 5 deg C.
+ * @suspend_on_hard_temp_limit: suspend charging when hard limit is hit
+ * @soft_temp_limit_compensation: compensation method when soft temperature
+ *				  limit is hit
+ * @charge_current_compensation: current (in uA) for charging compensation
+ *				 current when temperature hits soft limits
+ * @use_mains: AC/DC input can be used
+ * @use_usb: USB input can be used
+ * @use_usb_otg: USB OTG output can be used (not implemented yet)
+ * @irq_gpio: GPIO number used for interrupts (%-1 if not used)
+ * @enable_control: how charging enable/disable is controlled
+ *		    (driver/pin controls)
+ *
+ * @use_main, @use_usb, and @use_usb_otg are means to enable/disable
+ * hardware support for these. This is useful when we want to have for
+ * example OTG charging controlled via OTG transceiver driver and not by
+ * the SMB347 hardware.
+ *
+ * Hard and soft temperature limit values are given as described in the
+ * device data sheet and assuming NTC beta value is %3750. Even if this is
+ * not the case, these values should be used. They can be mapped to the
+ * corresponding NTC beta values with the help of table %2 in the data
+ * sheet. So for example if NTC beta is %3375 and we want to program hard
+ * hot limit to be %53 deg C, @hard_hot_temp_limit should be set to %50.
+ *
+ * If zero value is given in any of the current and voltage values, the
+ * factory programmed default will be used. For soft/hard temperature
+ * values, pass in %SMB347_TEMP_USE_DEFAULT instead.
+ */
+struct smb347_charger_platform_data {
+	struct power_supply_info battery_info;
+	unsigned int	max_charge_current;
+	unsigned int	max_charge_voltage;
+	unsigned int	pre_charge_current;
+	unsigned int	termination_current;
+	unsigned int	pre_to_fast_voltage;
+	unsigned int	mains_current_limit;
+	unsigned int	usb_hc_current_limit;
+	unsigned int	chip_temp_threshold;
+	int		soft_cold_temp_limit;
+	int		soft_hot_temp_limit;
+	int		hard_cold_temp_limit;
+	int		hard_hot_temp_limit;
+	bool		suspend_on_hard_temp_limit;
+	unsigned int	soft_temp_limit_compensation;
+	unsigned int	charge_current_compensation;
+	bool		use_mains;
+	bool		use_usb;
+	bool		use_usb_otg;
+	bool		disable_automatic_recharge;
+	int		irq_gpio;
+	bool		disable_stat_interrupts;
+	enum smb347_chg_enable enable_control;
+	bool		usb_mode_pin_ctrl;
+	char		**supplied_to;
+	size_t		num_supplicants;
+	int		en_gpio;
+};
+
+#endif /* SMB347_CHARGER_H */
diff --git a/include/linux/power/wmt_battery.h b/include/linux/power/wmt_battery.h
new file mode 100755
index 00000000..e721fa5e
--- /dev/null
+++ b/include/linux/power/wmt_battery.h
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2013  WonderMedia Technologies, Inc.  
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under  the terms of the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_POWER_WMT_BATTERY_H__
+#define __LINUX_POWER_WMT_BATTERY_H__
+
+static inline int prefixcmp(const char *str, const char *prefix)
+{
+	for (; ; str++, prefix++)
+		if (!*prefix)
+			return 0;
+		else if (*str != *prefix)
+			return (unsigned char)*prefix - (unsigned char)*str;
+}
+
+#include <linux/power_supply.h>
+#include <mach/hardware.h>
+
+enum cable_type {
+	CABLE_TYPE_DC,
+	CABLE_TYPE_USB,
+	CABLE_TYPE_UNKNOWN,
+};
+
+enum {
+	CURRENT_SWITCH_DYNAMIC,
+	CURRENT_SWITCH_SLEEP,
+};
+
+enum {
+	PC_CONNECTED_NOT_CHARGING,
+	PC_CONNECTED_CHARGING,
+};
+
+#define USB_BASE_ADD	(0xD8007800+WMT_MMAP_OFFSET)
+
+static inline int wmt_is_otg_plugin(void)
+{
+	return !(REG8_VAL(USB_BASE_ADD + 0x7F2) & BIT0);
+}
+
+static inline int wmt_is_dc_plugin(void)
+{
+	return (REG8_VAL(PM_CTRL_BASE_ADDR + 0x005d) & 0x01);
+}
+
+static inline void wmt_dcdet_irq_enable(void)
+{
+	uint32_t val;
+	// dcdet wakeup interrupt
+	PMTC_VAL |= BIT27;
+	val = PMWTC_VAL;
+	val &= ~(0xf << 12);
+	val |= 0x04 << 12;
+	PMWTC_VAL = val;
+	PMWE_VAL |= BIT27;
+
+	// dcdet interrupt
+	/* Register dcdet interrupt, edge trigger */
+	PMCIE_VAL |= BIT27;
+	WK_TRG_EN_VAL |= BIT27;
+	pmc_enable_wakeup_isr(WKS_DCDET, 4);
+}
+
+static inline void wmt_dcdet_irq_disable(void)
+{
+	pmc_disable_wakeup_isr(WKS_DCDET);
+}
+
+static inline int charger_get_status(void)
+{
+	struct power_supply *charger;
+	union power_supply_propval val;
+	
+	charger = power_supply_get_by_name("ac");
+	if (!charger) {
+		pr_err("get ac power supply failed\n");
+		return -ENODEV;
+	}
+
+	charger->get_property(charger, POWER_SUPPLY_PROP_STATUS, &val);
+	return val.intval;
+}
+
+static inline int charger_is_full(void)
+{
+	return charger_get_status() == POWER_SUPPLY_STATUS_FULL;
+}
+
+static inline int wmt_charger_is_dc_plugin(void)
+{
+	return power_supply_is_system_supplied();
+}
+
+extern int  wmt_is_pc_connected(void);
+extern void wmt_do_pc_connected(void);
+
+extern int parse_charger_led(void);
+extern void led_power_enable(int enable);
+
+#endif
diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h
new file mode 100644
index 00000000..e1f54479
--- /dev/null
+++ b/include/linux/power_supply.h
@@ -0,0 +1,279 @@
+/*
+ *  Universal power supply monitor class
+ *
+ *  Copyright © 2007  Anton Vorontsov <cbou@mail.ru>
+ *  Copyright © 2004  Szabolcs Gyurko
+ *  Copyright © 2003  Ian Molton <spyro@f2s.com>
+ *
+ *  Modified: 2004, Oct     Szabolcs Gyurko
+ *
+ *  You may use this code as per GPL version 2
+ */
+
+#ifndef __LINUX_POWER_SUPPLY_H__
+#define __LINUX_POWER_SUPPLY_H__
+
+#include <linux/workqueue.h>
+#include <linux/leds.h>
+
+struct device;
+
+/*
+ * All voltages, currents, charges, energies, time and temperatures in uV,
+ * µA, µAh, µWh, seconds and tenths of degree Celsius unless otherwise
+ * stated. It's driver's job to convert its raw values to units in which
+ * this class operates.
+ */
+
+/*
+ * For systems where the charger determines the maximum battery capacity
+ * the min and max fields should be used to present these values to user
+ * space. Unused/unknown fields will not appear in sysfs.
+ */
+
+enum {
+	POWER_SUPPLY_STATUS_UNKNOWN = 0,
+	POWER_SUPPLY_STATUS_CHARGING,
+	POWER_SUPPLY_STATUS_DISCHARGING,
+	POWER_SUPPLY_STATUS_NOT_CHARGING,
+	POWER_SUPPLY_STATUS_FULL,
+};
+
+enum {
+	POWER_SUPPLY_CHARGE_TYPE_UNKNOWN = 0,
+	POWER_SUPPLY_CHARGE_TYPE_NONE,
+	POWER_SUPPLY_CHARGE_TYPE_TRICKLE,
+	POWER_SUPPLY_CHARGE_TYPE_FAST,
+};
+
+enum {
+	POWER_SUPPLY_HEALTH_UNKNOWN = 0,
+	POWER_SUPPLY_HEALTH_GOOD,
+	POWER_SUPPLY_HEALTH_OVERHEAT,
+	POWER_SUPPLY_HEALTH_DEAD,
+	POWER_SUPPLY_HEALTH_OVERVOLTAGE,
+	POWER_SUPPLY_HEALTH_UNSPEC_FAILURE,
+	POWER_SUPPLY_HEALTH_COLD,
+};
+
+enum {
+	POWER_SUPPLY_TECHNOLOGY_UNKNOWN = 0,
+	POWER_SUPPLY_TECHNOLOGY_NiMH,
+	POWER_SUPPLY_TECHNOLOGY_LION,
+	POWER_SUPPLY_TECHNOLOGY_LIPO,
+	POWER_SUPPLY_TECHNOLOGY_LiFe,
+	POWER_SUPPLY_TECHNOLOGY_NiCd,
+	POWER_SUPPLY_TECHNOLOGY_LiMn,
+};
+
+enum {
+	POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN = 0,
+	POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL,
+	POWER_SUPPLY_CAPACITY_LEVEL_LOW,
+	POWER_SUPPLY_CAPACITY_LEVEL_NORMAL,
+	POWER_SUPPLY_CAPACITY_LEVEL_HIGH,
+	POWER_SUPPLY_CAPACITY_LEVEL_FULL,
+};
+
+enum {
+	POWER_SUPPLY_SCOPE_UNKNOWN = 0,
+	POWER_SUPPLY_SCOPE_SYSTEM,
+	POWER_SUPPLY_SCOPE_DEVICE,
+};
+
+enum power_supply_property {
+	/* Properties of type `int' */
+	POWER_SUPPLY_PROP_STATUS = 0,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_POWER_NOW,
+	POWER_SUPPLY_PROP_POWER_AVG,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_EMPTY,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_AVG,
+	POWER_SUPPLY_PROP_CHARGE_COUNTER,
+	POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
+	POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN,
+	POWER_SUPPLY_PROP_ENERGY_FULL,
+	POWER_SUPPLY_PROP_ENERGY_EMPTY,
+	POWER_SUPPLY_PROP_ENERGY_NOW,
+	POWER_SUPPLY_PROP_ENERGY_AVG,
+	POWER_SUPPLY_PROP_CAPACITY, /* in percents! */
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TEMP_AMBIENT,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
+	POWER_SUPPLY_PROP_TYPE, /* use power_supply.type instead */
+	POWER_SUPPLY_PROP_SCOPE,
+	/* Local extensions */
+	POWER_SUPPLY_PROP_USB_HC,
+	POWER_SUPPLY_PROP_USB_OTG,
+	POWER_SUPPLY_PROP_CHARGE_ENABLED,
+	/* Properties of type `const char *' */
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_SERIAL_NUMBER,
+};
+
+enum power_supply_type {
+	POWER_SUPPLY_TYPE_UNKNOWN = 0,
+	POWER_SUPPLY_TYPE_BATTERY,
+	POWER_SUPPLY_TYPE_UPS,
+	POWER_SUPPLY_TYPE_MAINS,
+	POWER_SUPPLY_TYPE_USB,		/* Standard Downstream Port */
+	POWER_SUPPLY_TYPE_USB_DCP,	/* Dedicated Charging Port */
+	POWER_SUPPLY_TYPE_USB_CDP,	/* Charging Downstream Port */
+	POWER_SUPPLY_TYPE_USB_ACA,	/* Accessory Charger Adapters */
+};
+
+union power_supply_propval {
+	int intval;
+	const char *strval;
+};
+
+struct power_supply {
+	const char *name;
+	enum power_supply_type type;
+	enum power_supply_property *properties;
+	size_t num_properties;
+
+	char **supplied_to;
+	size_t num_supplicants;
+
+	int (*get_property)(struct power_supply *psy,
+			    enum power_supply_property psp,
+			    union power_supply_propval *val);
+	int (*set_property)(struct power_supply *psy,
+			    enum power_supply_property psp,
+			    const union power_supply_propval *val);
+	int (*property_is_writeable)(struct power_supply *psy,
+				     enum power_supply_property psp);
+	void (*external_power_changed)(struct power_supply *psy);
+	void (*set_charged)(struct power_supply *psy);
+
+	/* For APM emulation, think legacy userspace. */
+	int use_for_apm;
+
+	/* private */
+	struct device *dev;
+	struct work_struct changed_work;
+	spinlock_t changed_lock;
+	bool changed;
+
+#ifdef CONFIG_LEDS_TRIGGERS
+	struct led_trigger *charging_full_trig;
+	char *charging_full_trig_name;
+	struct led_trigger *charging_trig;
+	char *charging_trig_name;
+	struct led_trigger *full_trig;
+	char *full_trig_name;
+	struct led_trigger *online_trig;
+	char *online_trig_name;
+	struct led_trigger *charging_blink_full_solid_trig;
+	char *charging_blink_full_solid_trig_name;
+#endif
+};
+
+/*
+ * This is recommended structure to specify static power supply parameters.
+ * Generic one, parametrizable for different power supplies. Power supply
+ * class itself does not use it, but that's what implementing most platform
+ * drivers, should try reuse for consistency.
+ */
+
+struct power_supply_info {
+	const char *name;
+	int technology;
+	int voltage_max_design;
+	int voltage_min_design;
+	int charge_full_design;
+	int charge_empty_design;
+	int energy_full_design;
+	int energy_empty_design;
+	int use_for_apm;
+};
+
+extern struct power_supply *power_supply_get_by_name(char *name);
+extern void power_supply_changed(struct power_supply *psy);
+extern int power_supply_am_i_supplied(struct power_supply *psy);
+extern int power_supply_set_battery_charged(struct power_supply *psy);
+
+#if defined(CONFIG_POWER_SUPPLY) || defined(CONFIG_POWER_SUPPLY_MODULE)
+extern int power_supply_is_system_supplied(void);
+#else
+static inline int power_supply_is_system_supplied(void) { return -ENOSYS; }
+#endif
+
+extern int power_supply_register(struct device *parent,
+				 struct power_supply *psy);
+extern void power_supply_unregister(struct power_supply *psy);
+extern int power_supply_powers(struct power_supply *psy, struct device *dev);
+
+/* For APM emulation, think legacy userspace. */
+extern struct class *power_supply_class;
+
+static inline bool power_supply_is_amp_property(enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+	case POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN:
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+	case POWER_SUPPLY_PROP_CHARGE_EMPTY:
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+	case POWER_SUPPLY_PROP_CHARGE_AVG:
+	case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+	case POWER_SUPPLY_PROP_CURRENT_MAX:
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+		return 1;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static inline bool power_supply_is_watt_property(enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
+	case POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN:
+	case POWER_SUPPLY_PROP_ENERGY_FULL:
+	case POWER_SUPPLY_PROP_ENERGY_EMPTY:
+	case POWER_SUPPLY_PROP_ENERGY_NOW:
+	case POWER_SUPPLY_PROP_ENERGY_AVG:
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+	case POWER_SUPPLY_PROP_POWER_NOW:
+		return 1;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+#endif /* __LINUX_POWER_SUPPLY_H__ */
diff --git a/include/linux/ppdev.h b/include/linux/ppdev.h
new file mode 100644
index 00000000..dc18c5d2
--- /dev/null
+++ b/include/linux/ppdev.h
@@ -0,0 +1,99 @@
+/*
+ * linux/include/linux/ppdev.h
+ *
+ * User-space parallel port device driver (header file).
+ *
+ * Copyright (C) 1998-9 Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Added PPGETTIME/PPSETTIME, Fred Barnes, 1999
+ * Added PPGETMODES/PPGETMODE/PPGETPHASE, Fred Barnes <frmb2@ukc.ac.uk>, 03/01/2001
+ */
+
+#define PP_IOCTL	'p'
+
+/* Set mode for read/write (e.g. IEEE1284_MODE_EPP) */
+#define PPSETMODE	_IOW(PP_IOCTL, 0x80, int)
+
+/* Read status */
+#define PPRSTATUS	_IOR(PP_IOCTL, 0x81, unsigned char)
+#define PPWSTATUS	OBSOLETE__IOW(PP_IOCTL, 0x82, unsigned char)
+
+/* Read/write control */
+#define PPRCONTROL	_IOR(PP_IOCTL, 0x83, unsigned char)
+#define PPWCONTROL	_IOW(PP_IOCTL, 0x84, unsigned char)
+
+struct ppdev_frob_struct {
+	unsigned char mask;
+	unsigned char val;
+};
+#define PPFCONTROL      _IOW(PP_IOCTL, 0x8e, struct ppdev_frob_struct)
+
+/* Read/write data */
+#define PPRDATA		_IOR(PP_IOCTL, 0x85, unsigned char)
+#define PPWDATA		_IOW(PP_IOCTL, 0x86, unsigned char)
+
+/* Read/write econtrol (not used) */
+#define PPRECONTROL	OBSOLETE__IOR(PP_IOCTL, 0x87, unsigned char)
+#define PPWECONTROL	OBSOLETE__IOW(PP_IOCTL, 0x88, unsigned char)
+
+/* Read/write FIFO (not used) */
+#define PPRFIFO		OBSOLETE__IOR(PP_IOCTL, 0x89, unsigned char)
+#define PPWFIFO		OBSOLETE__IOW(PP_IOCTL, 0x8a, unsigned char)
+
+/* Claim the port to start using it */
+#define PPCLAIM		_IO(PP_IOCTL, 0x8b)
+
+/* Release the port when you aren't using it */
+#define PPRELEASE	_IO(PP_IOCTL, 0x8c)
+
+/* Yield the port (release it if another driver is waiting,
+ * then reclaim) */
+#define PPYIELD		_IO(PP_IOCTL, 0x8d)
+
+/* Register device exclusively (must be before PPCLAIM). */
+#define PPEXCL		_IO(PP_IOCTL, 0x8f)
+
+/* Data line direction: non-zero for input mode. */
+#define PPDATADIR	_IOW(PP_IOCTL, 0x90, int)
+
+/* Negotiate a particular IEEE 1284 mode. */
+#define PPNEGOT		_IOW(PP_IOCTL, 0x91, int)
+
+/* Set control lines when an interrupt occurs. */
+#define PPWCTLONIRQ	_IOW(PP_IOCTL, 0x92, unsigned char)
+
+/* Clear (and return) interrupt count. */
+#define PPCLRIRQ	_IOR(PP_IOCTL, 0x93, int)
+
+/* Set the IEEE 1284 phase that we're in (e.g. IEEE1284_PH_FWD_IDLE) */
+#define PPSETPHASE	_IOW(PP_IOCTL, 0x94, int)
+
+/* Set and get port timeout (struct timeval's) */
+#define PPGETTIME	_IOR(PP_IOCTL, 0x95, struct timeval)
+#define PPSETTIME	_IOW(PP_IOCTL, 0x96, struct timeval)
+
+/* Get available modes (what the hardware can do) */
+#define PPGETMODES	_IOR(PP_IOCTL, 0x97, unsigned int)
+
+/* Get the current mode and phaze */
+#define PPGETMODE	_IOR(PP_IOCTL, 0x98, int)
+#define PPGETPHASE	_IOR(PP_IOCTL, 0x99, int)
+
+/* get/set flags */
+#define PPGETFLAGS	_IOR(PP_IOCTL, 0x9a, int)
+#define PPSETFLAGS	_IOW(PP_IOCTL, 0x9b, int)
+
+/* flags visible to the world */
+#define PP_FASTWRITE	(1<<2)
+#define PP_FASTREAD	(1<<3)
+#define PP_W91284PIC	(1<<4)
+
+/* only masks user-visible flags */
+#define PP_FLAGMASK	(PP_FASTWRITE | PP_FASTREAD | PP_W91284PIC)
+
+
diff --git a/include/linux/ppp-comp.h b/include/linux/ppp-comp.h
new file mode 100644
index 00000000..e53ff659
--- /dev/null
+++ b/include/linux/ppp-comp.h
@@ -0,0 +1,184 @@
+/*
+ * ppp-comp.h - Definitions for doing PPP packet compression.
+ *
+ * Copyright 1994-1998 Paul Mackerras.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ */
+#ifndef _NET_PPP_COMP_H
+#define _NET_PPP_COMP_H
+
+struct module;
+
+/*
+ * The following symbols control whether we include code for
+ * various compression methods.
+ */
+
+#ifndef DO_BSD_COMPRESS
+#define DO_BSD_COMPRESS	1	/* by default, include BSD-Compress */
+#endif
+#ifndef DO_DEFLATE
+#define DO_DEFLATE	1	/* by default, include Deflate */
+#endif
+#define DO_PREDICTOR_1	0
+#define DO_PREDICTOR_2	0
+
+/*
+ * Structure giving methods for compression/decompression.
+ */
+
+struct compressor {
+	int	compress_proto;	/* CCP compression protocol number */
+
+	/* Allocate space for a compressor (transmit side) */
+	void	*(*comp_alloc) (unsigned char *options, int opt_len);
+
+	/* Free space used by a compressor */
+	void	(*comp_free) (void *state);
+
+	/* Initialize a compressor */
+	int	(*comp_init) (void *state, unsigned char *options,
+			      int opt_len, int unit, int opthdr, int debug);
+
+	/* Reset a compressor */
+	void	(*comp_reset) (void *state);
+
+	/* Compress a packet */
+	int     (*compress) (void *state, unsigned char *rptr,
+			      unsigned char *obuf, int isize, int osize);
+
+	/* Return compression statistics */
+	void	(*comp_stat) (void *state, struct compstat *stats);
+
+	/* Allocate space for a decompressor (receive side) */
+	void	*(*decomp_alloc) (unsigned char *options, int opt_len);
+
+	/* Free space used by a decompressor */
+	void	(*decomp_free) (void *state);
+
+	/* Initialize a decompressor */
+	int	(*decomp_init) (void *state, unsigned char *options,
+				int opt_len, int unit, int opthdr, int mru,
+				int debug);
+
+	/* Reset a decompressor */
+	void	(*decomp_reset) (void *state);
+
+	/* Decompress a packet. */
+	int	(*decompress) (void *state, unsigned char *ibuf, int isize,
+				unsigned char *obuf, int osize);
+
+	/* Update state for an incompressible packet received */
+	void	(*incomp) (void *state, unsigned char *ibuf, int icnt);
+
+	/* Return decompression statistics */
+	void	(*decomp_stat) (void *state, struct compstat *stats);
+
+	/* Used in locking compressor modules */
+	struct module *owner;
+	/* Extra skb space needed by the compressor algorithm */
+	unsigned int comp_extra;
+};
+
+/*
+ * The return value from decompress routine is the length of the
+ * decompressed packet if successful, otherwise DECOMP_ERROR
+ * or DECOMP_FATALERROR if an error occurred.
+ * 
+ * We need to make this distinction so that we can disable certain
+ * useful functionality, namely sending a CCP reset-request as a result
+ * of an error detected after decompression.  This is to avoid infringing
+ * a patent held by Motorola.
+ * Don't you just lurve software patents.
+ */
+
+#define DECOMP_ERROR		-1	/* error detected before decomp. */
+#define DECOMP_FATALERROR	-2	/* error detected after decomp. */
+
+/*
+ * CCP codes.
+ */
+
+#define CCP_CONFREQ	1
+#define CCP_CONFACK	2
+#define CCP_TERMREQ	5
+#define CCP_TERMACK	6
+#define CCP_RESETREQ	14
+#define CCP_RESETACK	15
+
+/*
+ * Max # bytes for a CCP option
+ */
+
+#define CCP_MAX_OPTION_LENGTH	32
+
+/*
+ * Parts of a CCP packet.
+ */
+
+#define CCP_CODE(dp)		((dp)[0])
+#define CCP_ID(dp)		((dp)[1])
+#define CCP_LENGTH(dp)		(((dp)[2] << 8) + (dp)[3])
+#define CCP_HDRLEN		4
+
+#define CCP_OPT_CODE(dp)	((dp)[0])
+#define CCP_OPT_LENGTH(dp)	((dp)[1])
+#define CCP_OPT_MINLEN		2
+
+/*
+ * Definitions for BSD-Compress.
+ */
+
+#define CI_BSD_COMPRESS		21	/* config. option for BSD-Compress */
+#define CILEN_BSD_COMPRESS	3	/* length of config. option */
+
+/* Macros for handling the 3rd byte of the BSD-Compress config option. */
+#define BSD_NBITS(x)		((x) & 0x1F)	/* number of bits requested */
+#define BSD_VERSION(x)		((x) >> 5)	/* version of option format */
+#define BSD_CURRENT_VERSION	1		/* current version number */
+#define BSD_MAKE_OPT(v, n)	(((v) << 5) | (n))
+
+#define BSD_MIN_BITS		9	/* smallest code size supported */
+#define BSD_MAX_BITS		15	/* largest code size supported */
+
+/*
+ * Definitions for Deflate.
+ */
+
+#define CI_DEFLATE		26	/* config option for Deflate */
+#define CI_DEFLATE_DRAFT	24	/* value used in original draft RFC */
+#define CILEN_DEFLATE		4	/* length of its config option */
+
+#define DEFLATE_MIN_SIZE	9
+#define DEFLATE_MAX_SIZE	15
+#define DEFLATE_METHOD_VAL	8
+#define DEFLATE_SIZE(x)		(((x) >> 4) + 8)
+#define DEFLATE_METHOD(x)	((x) & 0x0F)
+#define DEFLATE_MAKE_OPT(w)	((((w) - 8) << 4) + DEFLATE_METHOD_VAL)
+#define DEFLATE_CHK_SEQUENCE	0
+
+/*
+ * Definitions for MPPE.
+ */
+
+#define CI_MPPE                18      /* config option for MPPE */
+#define CILEN_MPPE              6      /* length of config option */
+
+/*
+ * Definitions for other, as yet unsupported, compression methods.
+ */
+
+#define CI_PREDICTOR_1		1	/* config option for Predictor-1 */
+#define CILEN_PREDICTOR_1	2	/* length of its config option */
+#define CI_PREDICTOR_2		2	/* config option for Predictor-2 */
+#define CILEN_PREDICTOR_2	2	/* length of its config option */
+
+#ifdef __KERNEL__
+extern int ppp_register_compressor(struct compressor *);
+extern void ppp_unregister_compressor(struct compressor *);
+#endif /* __KERNEL__ */
+
+#endif /* _NET_PPP_COMP_H */
diff --git a/include/linux/ppp-ioctl.h b/include/linux/ppp-ioctl.h
new file mode 100644
index 00000000..2d9a8859
--- /dev/null
+++ b/include/linux/ppp-ioctl.h
@@ -0,0 +1,119 @@
+/*
+ * ppp-ioctl.h - PPP ioctl definitions.
+ *
+ * Copyright 1999-2002 Paul Mackerras.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ */
+#ifndef _PPP_IOCTL_H
+#define _PPP_IOCTL_H
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+/*
+ * Bit definitions for flags argument to PPPIOCGFLAGS/PPPIOCSFLAGS.
+ */
+#define SC_COMP_PROT	0x00000001	/* protocol compression (output) */
+#define SC_COMP_AC	0x00000002	/* header compression (output) */
+#define	SC_COMP_TCP	0x00000004	/* TCP (VJ) compression (output) */
+#define SC_NO_TCP_CCID	0x00000008	/* disable VJ connection-id comp. */
+#define SC_REJ_COMP_AC	0x00000010	/* reject adrs/ctrl comp. on input */
+#define SC_REJ_COMP_TCP	0x00000020	/* reject TCP (VJ) comp. on input */
+#define SC_CCP_OPEN	0x00000040	/* Look at CCP packets */
+#define SC_CCP_UP	0x00000080	/* May send/recv compressed packets */
+#define SC_ENABLE_IP	0x00000100	/* IP packets may be exchanged */
+#define SC_LOOP_TRAFFIC	0x00000200	/* send traffic to pppd */
+#define SC_MULTILINK	0x00000400	/* do multilink encapsulation */
+#define SC_MP_SHORTSEQ	0x00000800	/* use short MP sequence numbers */
+#define SC_COMP_RUN	0x00001000	/* compressor has been inited */
+#define SC_DECOMP_RUN	0x00002000	/* decompressor has been inited */
+#define SC_MP_XSHORTSEQ	0x00004000	/* transmit short MP seq numbers */
+#define SC_DEBUG	0x00010000	/* enable debug messages */
+#define SC_LOG_INPKT	0x00020000	/* log contents of good pkts recvd */
+#define SC_LOG_OUTPKT	0x00040000	/* log contents of pkts sent */
+#define SC_LOG_RAWIN	0x00080000	/* log all chars received */
+#define SC_LOG_FLUSH	0x00100000	/* log all chars flushed */
+#define	SC_SYNC		0x00200000	/* synchronous serial mode */
+#define	SC_MUST_COMP    0x00400000	/* no uncompressed packets may be sent or received */
+#define	SC_MASK		0x0f600fff	/* bits that user can change */
+
+/* state bits */
+#define SC_XMIT_BUSY	0x10000000	/* (used by isdn_ppp?) */
+#define SC_RCV_ODDP	0x08000000	/* have rcvd char with odd parity */
+#define SC_RCV_EVNP	0x04000000	/* have rcvd char with even parity */
+#define SC_RCV_B7_1	0x02000000	/* have rcvd char with bit 7 = 1 */
+#define SC_RCV_B7_0	0x01000000	/* have rcvd char with bit 7 = 0 */
+#define SC_DC_FERROR	0x00800000	/* fatal decomp error detected */
+#define SC_DC_ERROR	0x00400000	/* non-fatal decomp error detected */
+
+/* Used with PPPIOCGNPMODE/PPPIOCSNPMODE */
+struct npioctl {
+	int		protocol;	/* PPP protocol, e.g. PPP_IP */
+	enum NPmode	mode;
+};
+
+/* Structure describing a CCP configuration option, for PPPIOCSCOMPRESS */
+struct ppp_option_data {
+	__u8	__user *ptr;
+	__u32	length;
+	int	transmit;
+};
+
+/* For PPPIOCGL2TPSTATS */
+struct pppol2tp_ioc_stats {
+	__u16		tunnel_id;	/* redundant */
+	__u16		session_id;	/* if zero, get tunnel stats */
+	__u32		using_ipsec:1;	/* valid only for session_id == 0 */
+	__aligned_u64	tx_packets;
+	__aligned_u64	tx_bytes;
+	__aligned_u64	tx_errors;
+	__aligned_u64	rx_packets;
+	__aligned_u64	rx_bytes;
+	__aligned_u64	rx_seq_discards;
+	__aligned_u64	rx_oos_packets;
+	__aligned_u64	rx_errors;
+};
+
+/*
+ * Ioctl definitions.
+ */
+
+#define	PPPIOCGFLAGS	_IOR('t', 90, int)	/* get configuration flags */
+#define	PPPIOCSFLAGS	_IOW('t', 89, int)	/* set configuration flags */
+#define	PPPIOCGASYNCMAP	_IOR('t', 88, int)	/* get async map */
+#define	PPPIOCSASYNCMAP	_IOW('t', 87, int)	/* set async map */
+#define	PPPIOCGUNIT	_IOR('t', 86, int)	/* get ppp unit number */
+#define	PPPIOCGRASYNCMAP _IOR('t', 85, int)	/* get receive async map */
+#define	PPPIOCSRASYNCMAP _IOW('t', 84, int)	/* set receive async map */
+#define	PPPIOCGMRU	_IOR('t', 83, int)	/* get max receive unit */
+#define	PPPIOCSMRU	_IOW('t', 82, int)	/* set max receive unit */
+#define	PPPIOCSMAXCID	_IOW('t', 81, int)	/* set VJ max slot ID */
+#define PPPIOCGXASYNCMAP _IOR('t', 80, ext_accm) /* get extended ACCM */
+#define PPPIOCSXASYNCMAP _IOW('t', 79, ext_accm) /* set extended ACCM */
+#define PPPIOCXFERUNIT	_IO('t', 78)		/* transfer PPP unit */
+#define PPPIOCSCOMPRESS	_IOW('t', 77, struct ppp_option_data)
+#define PPPIOCGNPMODE	_IOWR('t', 76, struct npioctl) /* get NP mode */
+#define PPPIOCSNPMODE	_IOW('t', 75, struct npioctl)  /* set NP mode */
+#define PPPIOCSPASS	_IOW('t', 71, struct sock_fprog) /* set pass filter */
+#define PPPIOCSACTIVE	_IOW('t', 70, struct sock_fprog) /* set active filt */
+#define PPPIOCGDEBUG	_IOR('t', 65, int)	/* Read debug level */
+#define PPPIOCSDEBUG	_IOW('t', 64, int)	/* Set debug level */
+#define PPPIOCGIDLE	_IOR('t', 63, struct ppp_idle) /* get idle time */
+#define PPPIOCNEWUNIT	_IOWR('t', 62, int)	/* create new ppp unit */
+#define PPPIOCATTACH	_IOW('t', 61, int)	/* attach to ppp unit */
+#define PPPIOCDETACH	_IOW('t', 60, int)	/* detach from ppp unit/chan */
+#define PPPIOCSMRRU	_IOW('t', 59, int)	/* set multilink MRU */
+#define PPPIOCCONNECT	_IOW('t', 58, int)	/* connect channel to unit */
+#define PPPIOCDISCONN	_IO('t', 57)		/* disconnect channel */
+#define PPPIOCATTCHAN	_IOW('t', 56, int)	/* attach to ppp channel */
+#define PPPIOCGCHAN	_IOR('t', 55, int)	/* get ppp channel number */
+#define PPPIOCGL2TPSTATS _IOR('t', 54, struct pppol2tp_ioc_stats)
+
+#define SIOCGPPPSTATS   (SIOCDEVPRIVATE + 0)
+#define SIOCGPPPVER     (SIOCDEVPRIVATE + 1)	/* NEVER change this!! */
+#define SIOCGPPPCSTATS  (SIOCDEVPRIVATE + 2)
+
+#endif /* _PPP_IOCTL_H */
diff --git a/include/linux/ppp_channel.h b/include/linux/ppp_channel.h
new file mode 100644
index 00000000..5d87f810
--- /dev/null
+++ b/include/linux/ppp_channel.h
@@ -0,0 +1,88 @@
+#ifndef _PPP_CHANNEL_H_
+#define _PPP_CHANNEL_H_
+/*
+ * Definitions for the interface between the generic PPP code
+ * and a PPP channel.
+ *
+ * A PPP channel provides a way for the generic PPP code to send
+ * and receive packets over some sort of communications medium.
+ * Packets are stored in sk_buffs and have the 2-byte PPP protocol
+ * number at the start, but not the address and control bytes.
+ *
+ * Copyright 1999 Paul Mackerras.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ * ==FILEVERSION 20000322==
+ */
+
+#include <linux/list.h>
+#include <linux/skbuff.h>
+#include <linux/poll.h>
+#include <net/net_namespace.h>
+
+struct ppp_channel;
+
+struct ppp_channel_ops {
+	/* Send a packet (or multilink fragment) on this channel.
+	   Returns 1 if it was accepted, 0 if not. */
+	int	(*start_xmit)(struct ppp_channel *, struct sk_buff *);
+	/* Handle an ioctl call that has come in via /dev/ppp. */
+	int	(*ioctl)(struct ppp_channel *, unsigned int, unsigned long);
+};
+
+struct ppp_channel {
+	void		*private;	/* channel private data */
+	const struct ppp_channel_ops *ops; /* operations for this channel */
+	int		mtu;		/* max transmit packet size */
+	int		hdrlen;		/* amount of headroom channel needs */
+	void		*ppp;		/* opaque to channel */
+	int		speed;		/* transfer rate (bytes/second) */
+	/* the following is not used at present */
+	int		latency;	/* overhead time in milliseconds */
+};
+
+#ifdef __KERNEL__
+/* Called by the channel when it can send some more data. */
+extern void ppp_output_wakeup(struct ppp_channel *);
+
+/* Called by the channel to process a received PPP packet.
+   The packet should have just the 2-byte PPP protocol header. */
+extern void ppp_input(struct ppp_channel *, struct sk_buff *);
+
+/* Called by the channel when an input error occurs, indicating
+   that we may have missed a packet. */
+extern void ppp_input_error(struct ppp_channel *, int code);
+
+/* Attach a channel to a given PPP unit in specified net. */
+extern int ppp_register_net_channel(struct net *, struct ppp_channel *);
+
+/* Attach a channel to a given PPP unit. */
+extern int ppp_register_channel(struct ppp_channel *);
+
+/* Detach a channel from its PPP unit (e.g. on hangup). */
+extern void ppp_unregister_channel(struct ppp_channel *);
+
+/* Get the channel number for a channel */
+extern int ppp_channel_index(struct ppp_channel *);
+
+/* Get the unit number associated with a channel, or -1 if none */
+extern int ppp_unit_number(struct ppp_channel *);
+
+/* Get the device name associated with a channel, or NULL if none */
+extern char *ppp_dev_name(struct ppp_channel *);
+
+/*
+ * SMP locking notes:
+ * The channel code must ensure that when it calls ppp_unregister_channel,
+ * nothing is executing in any of the procedures above, for that
+ * channel.  The generic layer will ensure that nothing is executing
+ * in the start_xmit and ioctl routines for the channel by the time
+ * that ppp_unregister_channel returns.
+ */
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/include/linux/ppp_defs.h b/include/linux/ppp_defs.h
new file mode 100644
index 00000000..ba416f67
--- /dev/null
+++ b/include/linux/ppp_defs.h
@@ -0,0 +1,154 @@
+/*
+ * ppp_defs.h - PPP definitions.
+ *
+ * Copyright 1994-2000 Paul Mackerras.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ */
+#include <linux/types.h>
+
+#ifndef _PPP_DEFS_H_
+#define _PPP_DEFS_H_
+
+/*
+ * The basic PPP frame.
+ */
+#define PPP_HDRLEN	4	/* octets for standard ppp header */
+#define PPP_FCSLEN	2	/* octets for FCS */
+#define PPP_MRU		1500	/* default MRU = max length of info field */
+
+#define PPP_ADDRESS(p)	(((__u8 *)(p))[0])
+#define PPP_CONTROL(p)	(((__u8 *)(p))[1])
+#define PPP_PROTOCOL(p)	((((__u8 *)(p))[2] << 8) + ((__u8 *)(p))[3])
+
+/*
+ * Significant octet values.
+ */
+#define	PPP_ALLSTATIONS	0xff	/* All-Stations broadcast address */
+#define	PPP_UI		0x03	/* Unnumbered Information */
+#define	PPP_FLAG	0x7e	/* Flag Sequence */
+#define	PPP_ESCAPE	0x7d	/* Asynchronous Control Escape */
+#define	PPP_TRANS	0x20	/* Asynchronous transparency modifier */
+
+/*
+ * Protocol field values.
+ */
+#define PPP_IP		0x21	/* Internet Protocol */
+#define PPP_AT		0x29	/* AppleTalk Protocol */
+#define PPP_IPX		0x2b	/* IPX protocol */
+#define	PPP_VJC_COMP	0x2d	/* VJ compressed TCP */
+#define	PPP_VJC_UNCOMP	0x2f	/* VJ uncompressed TCP */
+#define PPP_MP		0x3d	/* Multilink protocol */
+#define PPP_IPV6	0x57	/* Internet Protocol Version 6 */
+#define PPP_COMPFRAG	0xfb	/* fragment compressed below bundle */
+#define PPP_COMP	0xfd	/* compressed packet */
+#define PPP_MPLS_UC	0x0281	/* Multi Protocol Label Switching - Unicast */
+#define PPP_MPLS_MC	0x0283	/* Multi Protocol Label Switching - Multicast */
+#define PPP_IPCP	0x8021	/* IP Control Protocol */
+#define PPP_ATCP	0x8029	/* AppleTalk Control Protocol */
+#define PPP_IPXCP	0x802b	/* IPX Control Protocol */
+#define PPP_IPV6CP	0x8057	/* IPv6 Control Protocol */
+#define PPP_CCPFRAG	0x80fb	/* CCP at link level (below MP bundle) */
+#define PPP_CCP		0x80fd	/* Compression Control Protocol */
+#define PPP_MPLSCP	0x80fd	/* MPLS Control Protocol */
+#define PPP_LCP		0xc021	/* Link Control Protocol */
+#define PPP_PAP		0xc023	/* Password Authentication Protocol */
+#define PPP_LQR		0xc025	/* Link Quality Report protocol */
+#define PPP_CHAP	0xc223	/* Cryptographic Handshake Auth. Protocol */
+#define PPP_CBCP	0xc029	/* Callback Control Protocol */
+
+/*
+ * Values for FCS calculations.
+ */
+
+#define PPP_INITFCS	0xffff	/* Initial FCS value */
+#define PPP_GOODFCS	0xf0b8	/* Good final FCS value */
+
+#ifdef __KERNEL__
+#include <linux/crc-ccitt.h>
+#define PPP_FCS(fcs, c) crc_ccitt_byte(fcs, c)
+#endif
+
+/*
+ * Extended asyncmap - allows any character to be escaped.
+ */
+
+typedef __u32		ext_accm[8];
+
+/*
+ * What to do with network protocol (NP) packets.
+ */
+enum NPmode {
+    NPMODE_PASS,		/* pass the packet through */
+    NPMODE_DROP,		/* silently drop the packet */
+    NPMODE_ERROR,		/* return an error */
+    NPMODE_QUEUE		/* save it up for later. */
+};
+
+/*
+ * Statistics for LQRP and pppstats
+ */
+struct pppstat	{
+    __u32	ppp_discards;	/* # frames discarded */
+
+    __u32	ppp_ibytes;	/* bytes received */
+    __u32	ppp_ioctects;	/* bytes received not in error */
+    __u32	ppp_ipackets;	/* packets received */
+    __u32	ppp_ierrors;	/* receive errors */
+    __u32	ppp_ilqrs;	/* # LQR frames received */
+
+    __u32	ppp_obytes;	/* raw bytes sent */
+    __u32	ppp_ooctects;	/* frame bytes sent */
+    __u32	ppp_opackets;	/* packets sent */
+    __u32	ppp_oerrors;	/* transmit errors */ 
+    __u32	ppp_olqrs;	/* # LQR frames sent */
+};
+
+struct vjstat {
+    __u32	vjs_packets;	/* outbound packets */
+    __u32	vjs_compressed;	/* outbound compressed packets */
+    __u32	vjs_searches;	/* searches for connection state */
+    __u32	vjs_misses;	/* times couldn't find conn. state */
+    __u32	vjs_uncompressedin; /* inbound uncompressed packets */
+    __u32	vjs_compressedin;   /* inbound compressed packets */
+    __u32	vjs_errorin;	/* inbound unknown type packets */
+    __u32	vjs_tossed;	/* inbound packets tossed because of error */
+};
+
+struct compstat {
+    __u32	unc_bytes;	/* total uncompressed bytes */
+    __u32	unc_packets;	/* total uncompressed packets */
+    __u32	comp_bytes;	/* compressed bytes */
+    __u32	comp_packets;	/* compressed packets */
+    __u32	inc_bytes;	/* incompressible bytes */
+    __u32	inc_packets;	/* incompressible packets */
+
+    /* the compression ratio is defined as in_count / bytes_out */
+    __u32       in_count;	/* Bytes received */
+    __u32       bytes_out;	/* Bytes transmitted */
+
+    double	ratio;		/* not computed in kernel. */
+};
+
+struct ppp_stats {
+    struct pppstat	p;	/* basic PPP statistics */
+    struct vjstat	vj;	/* VJ header compression statistics */
+};
+
+struct ppp_comp_stats {
+    struct compstat	c;	/* packet compression statistics */
+    struct compstat	d;	/* packet decompression statistics */
+};
+
+/*
+ * The following structure records the time in seconds since
+ * the last NP packet was sent or received.
+ */
+struct ppp_idle {
+    __kernel_time_t xmit_idle;	/* time since last NP packet sent */
+    __kernel_time_t recv_idle;	/* time since last NP packet received */
+};
+
+#endif /* _PPP_DEFS_H_ */
diff --git a/include/linux/pps-gpio.h b/include/linux/pps-gpio.h
new file mode 100644
index 00000000..0035abe4
--- /dev/null
+++ b/include/linux/pps-gpio.h
@@ -0,0 +1,32 @@
+/*
+ * pps-gpio.h -- PPS client for GPIOs
+ *
+ *
+ * Copyright (C) 2011 James Nuss <jamesnuss@nanometrics.ca>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _PPS_GPIO_H
+#define _PPS_GPIO_H
+
+struct pps_gpio_platform_data {
+	bool assert_falling_edge;
+	bool capture_clear;
+	unsigned int gpio_pin;
+	const char *gpio_label;
+};
+
+#endif
diff --git a/include/linux/pps.h b/include/linux/pps.h
new file mode 100644
index 00000000..a9bb1d93
--- /dev/null
+++ b/include/linux/pps.h
@@ -0,0 +1,131 @@
+/*
+ * PPS API header
+ *
+ * Copyright (C) 2005-2009   Rodolfo Giometti <giometti@linux.it>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#ifndef _PPS_H_
+#define _PPS_H_
+
+#include <linux/types.h>
+
+#define PPS_VERSION		"5.3.6"
+#define PPS_MAX_SOURCES		16		/* should be enough... */
+
+/* Implementation note: the logical states ``assert'' and ``clear''
+ * are implemented in terms of the chip register, i.e. ``assert''
+ * means the bit is set.  */
+
+/*
+ * 3.2 New data structures
+ */
+
+#define PPS_API_VERS_1		1
+#define PPS_API_VERS		PPS_API_VERS_1	/* we use API version 1 */
+#define PPS_MAX_NAME_LEN	32
+
+/* 32-bit vs. 64-bit compatibility.
+ *
+ * 0n i386, the alignment of a uint64_t is only 4 bytes, while on most other
+ * architectures it's 8 bytes. On i386, there will be no padding between the
+ * two consecutive 'struct pps_ktime' members of struct pps_kinfo and struct
+ * pps_kparams. But on most platforms there will be padding to ensure correct
+ * alignment.
+ *
+ * The simple fix is probably to add an explicit padding.
+ *					 		[David Woodhouse]
+ */
+struct pps_ktime {
+	__s64 sec;
+	__s32 nsec;
+	__u32 flags;
+};
+#define PPS_TIME_INVALID	(1<<0)	/* used to specify timeout==NULL */
+
+struct pps_kinfo {
+	__u32 assert_sequence;		/* seq. num. of assert event */
+	__u32 clear_sequence; 		/* seq. num. of clear event */
+	struct pps_ktime assert_tu;	/* time of assert event */
+	struct pps_ktime clear_tu;	/* time of clear event */
+	int current_mode;		/* current mode bits */
+};
+
+struct pps_kparams {
+	int api_version;		/* API version # */
+	int mode;			/* mode bits */
+	struct pps_ktime assert_off_tu;	/* offset compensation for assert */
+	struct pps_ktime clear_off_tu;	/* offset compensation for clear */
+};
+
+/*
+ * 3.3 Mode bit definitions
+ */
+
+/* Device/implementation parameters */
+#define PPS_CAPTUREASSERT	0x01	/* capture assert events */
+#define PPS_CAPTURECLEAR	0x02	/* capture clear events */
+#define PPS_CAPTUREBOTH		0x03	/* capture assert and clear events */
+
+#define PPS_OFFSETASSERT	0x10	/* apply compensation for assert ev. */
+#define PPS_OFFSETCLEAR		0x20	/* apply compensation for clear ev. */
+
+#define PPS_CANWAIT		0x100	/* can we wait for an event? */
+#define PPS_CANPOLL		0x200	/* bit reserved for future use */
+
+/* Kernel actions */
+#define PPS_ECHOASSERT		0x40	/* feed back assert event to output */
+#define PPS_ECHOCLEAR		0x80	/* feed back clear event to output */
+
+/* Timestamp formats */
+#define PPS_TSFMT_TSPEC		0x1000	/* select timespec format */
+#define PPS_TSFMT_NTPFP		0x2000	/* select NTP format */
+
+/*
+ * 3.4.4 New functions: disciplining the kernel timebase
+ */
+
+/* Kernel consumers */
+#define PPS_KC_HARDPPS		0	/* hardpps() (or equivalent) */
+#define PPS_KC_HARDPPS_PLL	1	/* hardpps() constrained to
+					   use a phase-locked loop */
+#define PPS_KC_HARDPPS_FLL	2	/* hardpps() constrained to
+					   use a frequency-locked loop */
+/*
+ * Here begins the implementation-specific part!
+ */
+
+struct pps_fdata {
+	struct pps_kinfo info;
+	struct pps_ktime timeout;
+};
+
+struct pps_bind_args {
+	int tsformat;	/* format of time stamps */
+	int edge;	/* selected event type */
+	int consumer;	/* selected kernel consumer */
+};
+
+#include <linux/ioctl.h>
+
+#define PPS_GETPARAMS		_IOR('p', 0xa1, struct pps_kparams *)
+#define PPS_SETPARAMS		_IOW('p', 0xa2, struct pps_kparams *)
+#define PPS_GETCAP		_IOR('p', 0xa3, int *)
+#define PPS_FETCH		_IOWR('p', 0xa4, struct pps_fdata *)
+#define PPS_KC_BIND		_IOW('p', 0xa5, struct pps_bind_args *)
+
+#endif /* _PPS_H_ */
diff --git a/include/linux/pps_kernel.h b/include/linux/pps_kernel.h
new file mode 100644
index 00000000..94048547
--- /dev/null
+++ b/include/linux/pps_kernel.h
@@ -0,0 +1,120 @@
+/*
+ * PPS API kernel header
+ *
+ * Copyright (C) 2009   Rodolfo Giometti <giometti@linux.it>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef LINUX_PPS_KERNEL_H
+#define LINUX_PPS_KERNEL_H
+
+#include <linux/pps.h>
+
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/time.h>
+
+/*
+ * Global defines
+ */
+
+struct pps_device;
+
+/* The specific PPS source info */
+struct pps_source_info {
+	char name[PPS_MAX_NAME_LEN];		/* simbolic name */
+	char path[PPS_MAX_NAME_LEN];		/* path of connected device */
+	int mode;				/* PPS's allowed mode */
+
+	void (*echo)(struct pps_device *pps,
+			int event, void *data);	/* PPS echo function */
+
+	struct module *owner;
+	struct device *dev;
+};
+
+struct pps_event_time {
+#ifdef CONFIG_NTP_PPS
+	struct timespec ts_raw;
+#endif /* CONFIG_NTP_PPS */
+	struct timespec ts_real;
+};
+
+/* The main struct */
+struct pps_device {
+	struct pps_source_info info;		/* PSS source info */
+
+	struct pps_kparams params;		/* PPS's current params */
+
+	__u32 assert_sequence;			/* PPS' assert event seq # */
+	__u32 clear_sequence;			/* PPS' clear event seq # */
+	struct pps_ktime assert_tu;
+	struct pps_ktime clear_tu;
+	int current_mode;			/* PPS mode at event time */
+
+	unsigned int last_ev;			/* last PPS event id */
+	wait_queue_head_t queue;		/* PPS event queue */
+
+	unsigned int id;			/* PPS source unique ID */
+	struct cdev cdev;
+	struct device *dev;
+	struct fasync_struct *async_queue;	/* fasync method */
+	spinlock_t lock;
+};
+
+/*
+ * Global variables
+ */
+
+extern struct device_attribute pps_attrs[];
+
+/*
+ * Exported functions
+ */
+
+extern struct pps_device *pps_register_source(
+		struct pps_source_info *info, int default_params);
+extern void pps_unregister_source(struct pps_device *pps);
+extern int pps_register_cdev(struct pps_device *pps);
+extern void pps_unregister_cdev(struct pps_device *pps);
+extern void pps_event(struct pps_device *pps,
+		struct pps_event_time *ts, int event, void *data);
+
+static inline void timespec_to_pps_ktime(struct pps_ktime *kt,
+		struct timespec ts)
+{
+	kt->sec = ts.tv_sec;
+	kt->nsec = ts.tv_nsec;
+}
+
+#ifdef CONFIG_NTP_PPS
+
+static inline void pps_get_ts(struct pps_event_time *ts)
+{
+	getnstime_raw_and_real(&ts->ts_raw, &ts->ts_real);
+}
+
+#else /* CONFIG_NTP_PPS */
+
+static inline void pps_get_ts(struct pps_event_time *ts)
+{
+	getnstimeofday(&ts->ts_real);
+}
+
+#endif /* CONFIG_NTP_PPS */
+
+#endif /* LINUX_PPS_KERNEL_H */
+
diff --git a/include/linux/prctl.h b/include/linux/prctl.h
new file mode 100644
index 00000000..e0cfec24
--- /dev/null
+++ b/include/linux/prctl.h
@@ -0,0 +1,127 @@
+#ifndef _LINUX_PRCTL_H
+#define _LINUX_PRCTL_H
+
+/* Values to pass as first argument to prctl() */
+
+#define PR_SET_PDEATHSIG  1  /* Second arg is a signal */
+#define PR_GET_PDEATHSIG  2  /* Second arg is a ptr to return the signal */
+
+/* Get/set current->mm->dumpable */
+#define PR_GET_DUMPABLE   3
+#define PR_SET_DUMPABLE   4
+
+/* Get/set unaligned access control bits (if meaningful) */
+#define PR_GET_UNALIGN	  5
+#define PR_SET_UNALIGN	  6
+# define PR_UNALIGN_NOPRINT	1	/* silently fix up unaligned user accesses */
+# define PR_UNALIGN_SIGBUS	2	/* generate SIGBUS on unaligned user access */
+
+/* Get/set whether or not to drop capabilities on setuid() away from
+ * uid 0 (as per security/commoncap.c) */
+#define PR_GET_KEEPCAPS   7
+#define PR_SET_KEEPCAPS   8
+
+/* Get/set floating-point emulation control bits (if meaningful) */
+#define PR_GET_FPEMU  9
+#define PR_SET_FPEMU 10
+# define PR_FPEMU_NOPRINT	1	/* silently emulate fp operations accesses */
+# define PR_FPEMU_SIGFPE	2	/* don't emulate fp operations, send SIGFPE instead */
+
+/* Get/set floating-point exception mode (if meaningful) */
+#define PR_GET_FPEXC	11
+#define PR_SET_FPEXC	12
+# define PR_FP_EXC_SW_ENABLE	0x80	/* Use FPEXC for FP exception enables */
+# define PR_FP_EXC_DIV		0x010000	/* floating point divide by zero */
+# define PR_FP_EXC_OVF		0x020000	/* floating point overflow */
+# define PR_FP_EXC_UND		0x040000	/* floating point underflow */
+# define PR_FP_EXC_RES		0x080000	/* floating point inexact result */
+# define PR_FP_EXC_INV		0x100000	/* floating point invalid operation */
+# define PR_FP_EXC_DISABLED	0	/* FP exceptions disabled */
+# define PR_FP_EXC_NONRECOV	1	/* async non-recoverable exc. mode */
+# define PR_FP_EXC_ASYNC	2	/* async recoverable exception mode */
+# define PR_FP_EXC_PRECISE	3	/* precise exception mode */
+
+/* Get/set whether we use statistical process timing or accurate timestamp
+ * based process timing */
+#define PR_GET_TIMING   13
+#define PR_SET_TIMING   14
+# define PR_TIMING_STATISTICAL  0       /* Normal, traditional,
+                                                   statistical process timing */
+# define PR_TIMING_TIMESTAMP    1       /* Accurate timestamp based
+                                                   process timing */
+
+#define PR_SET_NAME    15		/* Set process name */
+#define PR_GET_NAME    16		/* Get process name */
+
+/* Get/set process endian */
+#define PR_GET_ENDIAN	19
+#define PR_SET_ENDIAN	20
+# define PR_ENDIAN_BIG		0
+# define PR_ENDIAN_LITTLE	1	/* True little endian mode */
+# define PR_ENDIAN_PPC_LITTLE	2	/* "PowerPC" pseudo little endian */
+
+/* Get/set process seccomp mode */
+#define PR_GET_SECCOMP	21
+#define PR_SET_SECCOMP	22
+
+/* Get/set the capability bounding set (as per security/commoncap.c) */
+#define PR_CAPBSET_READ 23
+#define PR_CAPBSET_DROP 24
+
+/* Get/set the process' ability to use the timestamp counter instruction */
+#define PR_GET_TSC 25
+#define PR_SET_TSC 26
+# define PR_TSC_ENABLE		1	/* allow the use of the timestamp counter */
+# define PR_TSC_SIGSEGV		2	/* throw a SIGSEGV instead of reading the TSC */
+
+/* Get/set securebits (as per security/commoncap.c) */
+#define PR_GET_SECUREBITS 27
+#define PR_SET_SECUREBITS 28
+
+/*
+ * Get/set the timerslack as used by poll/select/nanosleep
+ * A value of 0 means "use default"
+ */
+#define PR_SET_TIMERSLACK 29
+#define PR_GET_TIMERSLACK 30
+
+#define PR_TASK_PERF_EVENTS_DISABLE		31
+#define PR_TASK_PERF_EVENTS_ENABLE		32
+
+/*
+ * Set early/late kill mode for hwpoison memory corruption.
+ * This influences when the process gets killed on a memory corruption.
+ */
+#define PR_MCE_KILL	33
+# define PR_MCE_KILL_CLEAR   0
+# define PR_MCE_KILL_SET     1
+
+# define PR_MCE_KILL_LATE    0
+# define PR_MCE_KILL_EARLY   1
+# define PR_MCE_KILL_DEFAULT 2
+
+#define PR_MCE_KILL_GET 34
+
+/*
+ * Tune up process memory map specifics.
+ */
+#define PR_SET_MM		35
+# define PR_SET_MM_START_CODE		1
+# define PR_SET_MM_END_CODE		2
+# define PR_SET_MM_START_DATA		3
+# define PR_SET_MM_END_DATA		4
+# define PR_SET_MM_START_STACK		5
+# define PR_SET_MM_START_BRK		6
+# define PR_SET_MM_BRK			7
+
+/*
+ * Set specific pid that is allowed to ptrace the current task.
+ * A value of 0 mean "no process".
+ */
+#define PR_SET_PTRACER 0x59616d61
+# define PR_SET_PTRACER_ANY ((unsigned long)-1)
+
+#define PR_SET_CHILD_SUBREAPER 36
+#define PR_GET_CHILD_SUBREAPER 37
+
+#endif /* _LINUX_PRCTL_H */
diff --git a/include/linux/preempt.h b/include/linux/preempt.h
new file mode 100644
index 00000000..5a710b9c
--- /dev/null
+++ b/include/linux/preempt.h
@@ -0,0 +1,155 @@
+#ifndef __LINUX_PREEMPT_H
+#define __LINUX_PREEMPT_H
+
+/*
+ * include/linux/preempt.h - macros for accessing and manipulating
+ * preempt_count (used for kernel preemption, interrupt count, etc.)
+ */
+
+#include <linux/thread_info.h>
+#include <linux/linkage.h>
+#include <linux/list.h>
+
+#if defined(CONFIG_DEBUG_PREEMPT) || defined(CONFIG_PREEMPT_TRACER)
+  extern void add_preempt_count(int val);
+  extern void sub_preempt_count(int val);
+#else
+# define add_preempt_count(val)	do { preempt_count() += (val); } while (0)
+# define sub_preempt_count(val)	do { preempt_count() -= (val); } while (0)
+#endif
+
+#define inc_preempt_count() add_preempt_count(1)
+#define dec_preempt_count() sub_preempt_count(1)
+
+#define preempt_count()	(current_thread_info()->preempt_count)
+
+#ifdef CONFIG_PREEMPT
+
+asmlinkage void preempt_schedule(void);
+
+#define preempt_check_resched() \
+do { \
+	if (unlikely(test_thread_flag(TIF_NEED_RESCHED))) \
+		preempt_schedule(); \
+} while (0)
+
+#else /* !CONFIG_PREEMPT */
+
+#define preempt_check_resched()		do { } while (0)
+
+#endif /* CONFIG_PREEMPT */
+
+
+#ifdef CONFIG_PREEMPT_COUNT
+
+#define preempt_disable() \
+do { \
+	inc_preempt_count(); \
+	barrier(); \
+} while (0)
+
+#define sched_preempt_enable_no_resched() \
+do { \
+	barrier(); \
+	dec_preempt_count(); \
+} while (0)
+
+#define preempt_enable_no_resched()	sched_preempt_enable_no_resched()
+
+#define preempt_enable() \
+do { \
+	preempt_enable_no_resched(); \
+	barrier(); \
+	preempt_check_resched(); \
+} while (0)
+
+/* For debugging and tracer internals only! */
+#define add_preempt_count_notrace(val)			\
+	do { preempt_count() += (val); } while (0)
+#define sub_preempt_count_notrace(val)			\
+	do { preempt_count() -= (val); } while (0)
+#define inc_preempt_count_notrace() add_preempt_count_notrace(1)
+#define dec_preempt_count_notrace() sub_preempt_count_notrace(1)
+
+#define preempt_disable_notrace() \
+do { \
+	inc_preempt_count_notrace(); \
+	barrier(); \
+} while (0)
+
+#define preempt_enable_no_resched_notrace() \
+do { \
+	barrier(); \
+	dec_preempt_count_notrace(); \
+} while (0)
+
+/* preempt_check_resched is OK to trace */
+#define preempt_enable_notrace() \
+do { \
+	preempt_enable_no_resched_notrace(); \
+	barrier(); \
+	preempt_check_resched(); \
+} while (0)
+
+#else /* !CONFIG_PREEMPT_COUNT */
+
+#define preempt_disable()		do { } while (0)
+#define sched_preempt_enable_no_resched()	do { } while (0)
+#define preempt_enable_no_resched()	do { } while (0)
+#define preempt_enable()		do { } while (0)
+
+#define preempt_disable_notrace()		do { } while (0)
+#define preempt_enable_no_resched_notrace()	do { } while (0)
+#define preempt_enable_notrace()		do { } while (0)
+
+#endif /* CONFIG_PREEMPT_COUNT */
+
+#ifdef CONFIG_PREEMPT_NOTIFIERS
+
+struct preempt_notifier;
+
+/**
+ * preempt_ops - notifiers called when a task is preempted and rescheduled
+ * @sched_in: we're about to be rescheduled:
+ *    notifier: struct preempt_notifier for the task being scheduled
+ *    cpu:  cpu we're scheduled on
+ * @sched_out: we've just been preempted
+ *    notifier: struct preempt_notifier for the task being preempted
+ *    next: the task that's kicking us out
+ *
+ * Please note that sched_in and out are called under different
+ * contexts.  sched_out is called with rq lock held and irq disabled
+ * while sched_in is called without rq lock and irq enabled.  This
+ * difference is intentional and depended upon by its users.
+ */
+struct preempt_ops {
+	void (*sched_in)(struct preempt_notifier *notifier, int cpu);
+	void (*sched_out)(struct preempt_notifier *notifier,
+			  struct task_struct *next);
+};
+
+/**
+ * preempt_notifier - key for installing preemption notifiers
+ * @link: internal use
+ * @ops: defines the notifier functions to be called
+ *
+ * Usually used in conjunction with container_of().
+ */
+struct preempt_notifier {
+	struct hlist_node link;
+	struct preempt_ops *ops;
+};
+
+void preempt_notifier_register(struct preempt_notifier *notifier);
+void preempt_notifier_unregister(struct preempt_notifier *notifier);
+
+static inline void preempt_notifier_init(struct preempt_notifier *notifier,
+				     struct preempt_ops *ops)
+{
+	INIT_HLIST_NODE(&notifier->link);
+	notifier->ops = ops;
+}
+
+#endif
+
+#endif /* __LINUX_PREEMPT_H */
diff --git a/include/linux/prefetch.h b/include/linux/prefetch.h
new file mode 100644
index 00000000..a3bfbdf6
--- /dev/null
+++ b/include/linux/prefetch.h
@@ -0,0 +1,64 @@
+/*
+ *  Generic cache management functions. Everything is arch-specific,  
+ *  but this header exists to make sure the defines/functions can be
+ *  used in a generic way.
+ *
+ *  2000-11-13  Arjan van de Ven   <arjan@fenrus.demon.nl>
+ *
+ */
+
+#ifndef _LINUX_PREFETCH_H
+#define _LINUX_PREFETCH_H
+
+#include <linux/types.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+
+/*
+	prefetch(x) attempts to pre-emptively get the memory pointed to
+	by address "x" into the CPU L1 cache. 
+	prefetch(x) should not cause any kind of exception, prefetch(0) is
+	specifically ok.
+
+	prefetch() should be defined by the architecture, if not, the 
+	#define below provides a no-op define.	
+	
+	There are 3 prefetch() macros:
+	
+	prefetch(x)  	- prefetches the cacheline at "x" for read
+	prefetchw(x)	- prefetches the cacheline at "x" for write
+	spin_lock_prefetch(x) - prefetches the spinlock *x for taking
+	
+	there is also PREFETCH_STRIDE which is the architecure-preferred 
+	"lookahead" size for prefetching streamed operations.
+	
+*/
+
+#ifndef ARCH_HAS_PREFETCH
+#define prefetch(x) __builtin_prefetch(x)
+#endif
+
+#ifndef ARCH_HAS_PREFETCHW
+#define prefetchw(x) __builtin_prefetch(x,1)
+#endif
+
+#ifndef ARCH_HAS_SPINLOCK_PREFETCH
+#define spin_lock_prefetch(x) prefetchw(x)
+#endif
+
+#ifndef PREFETCH_STRIDE
+#define PREFETCH_STRIDE (4*L1_CACHE_BYTES)
+#endif
+
+static inline void prefetch_range(void *addr, size_t len)
+{
+#ifdef ARCH_HAS_PREFETCH
+	char *cp;
+	char *end = addr + len;
+
+	for (cp = addr; cp < end; cp += PREFETCH_STRIDE)
+		prefetch(cp);
+#endif
+}
+
+#endif
diff --git a/include/linux/printk.h b/include/linux/printk.h
new file mode 100644
index 00000000..0525927f
--- /dev/null
+++ b/include/linux/printk.h
@@ -0,0 +1,319 @@
+#ifndef __KERNEL_PRINTK__
+#define __KERNEL_PRINTK__
+
+#include <linux/init.h>
+
+extern const char linux_banner[];
+extern const char linux_proc_banner[];
+
+#define KERN_EMERG	"<0>"	/* system is unusable			*/
+#define KERN_ALERT	"<1>"	/* action must be taken immediately	*/
+#define KERN_CRIT	"<2>"	/* critical conditions			*/
+#define KERN_ERR	"<3>"	/* error conditions			*/
+#define KERN_WARNING	"<4>"	/* warning conditions			*/
+#define KERN_NOTICE	"<5>"	/* normal but significant condition	*/
+#define KERN_INFO	"<6>"	/* informational			*/
+#define KERN_DEBUG	"<7>"	/* debug-level messages			*/
+
+/* Use the default kernel loglevel */
+#define KERN_DEFAULT	"<d>"
+/*
+ * Annotation for a "continued" line of log printout (only done after a
+ * line that had no enclosing \n). Only to be used by core/arch code
+ * during early bootup (a continued line is not SMP-safe otherwise).
+ */
+#define KERN_CONT	"<c>"
+
+extern int console_printk[];
+
+#define console_loglevel (console_printk[0])
+#define default_message_loglevel (console_printk[1])
+#define minimum_console_loglevel (console_printk[2])
+#define default_console_loglevel (console_printk[3])
+
+static inline void console_silent(void)
+{
+	console_loglevel = 0;
+}
+
+static inline void console_verbose(void)
+{
+	if (console_loglevel)
+		console_loglevel = 15;
+}
+
+struct va_format {
+	const char *fmt;
+	va_list *va;
+};
+
+/*
+ * FW_BUG
+ * Add this to a message where you are sure the firmware is buggy or behaves
+ * really stupid or out of spec. Be aware that the responsible BIOS developer
+ * should be able to fix this issue or at least get a concrete idea of the
+ * problem by reading your message without the need of looking at the kernel
+ * code.
+ *
+ * Use it for definite and high priority BIOS bugs.
+ *
+ * FW_WARN
+ * Use it for not that clear (e.g. could the kernel messed up things already?)
+ * and medium priority BIOS bugs.
+ *
+ * FW_INFO
+ * Use this one if you want to tell the user or vendor about something
+ * suspicious, but generally harmless related to the firmware.
+ *
+ * Use it for information or very low priority BIOS bugs.
+ */
+#define FW_BUG		"[Firmware Bug]: "
+#define FW_WARN		"[Firmware Warn]: "
+#define FW_INFO		"[Firmware Info]: "
+
+/*
+ * HW_ERR
+ * Add this to a message for hardware errors, so that user can report
+ * it to hardware vendor instead of LKML or software vendor.
+ */
+#define HW_ERR		"[Hardware Error]: "
+
+/*
+ * Dummy printk for disabled debugging statements to use whilst maintaining
+ * gcc's format and side-effect checking.
+ */
+static inline __printf(1, 2)
+int no_printk(const char *fmt, ...)
+{
+	return 0;
+}
+
+extern asmlinkage __printf(1, 2)
+void early_printk(const char *fmt, ...);
+
+extern int printk_needs_cpu(int cpu);
+extern void printk_tick(void);
+
+#ifdef CONFIG_PRINTK
+asmlinkage __printf(1, 0)
+int vprintk(const char *fmt, va_list args);
+asmlinkage __printf(1, 2) __cold
+int printk(const char *fmt, ...);
+
+/*
+ * Special printk facility for scheduler use only, _DO_NOT_USE_ !
+ */
+__printf(1, 2) __cold int printk_sched(const char *fmt, ...);
+
+/*
+ * Please don't use printk_ratelimit(), because it shares ratelimiting state
+ * with all other unrelated printk_ratelimit() callsites.  Instead use
+ * printk_ratelimited() or plain old __ratelimit().
+ */
+extern int __printk_ratelimit(const char *func);
+#define printk_ratelimit() __printk_ratelimit(__func__)
+extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
+				   unsigned int interval_msec);
+
+extern int printk_delay_msec;
+extern int dmesg_restrict;
+extern int kptr_restrict;
+
+void log_buf_kexec_setup(void);
+void __init setup_log_buf(int early);
+#else
+static inline __printf(1, 0)
+int vprintk(const char *s, va_list args)
+{
+	return 0;
+}
+static inline __printf(1, 2) __cold
+int printk(const char *s, ...)
+{
+	return 0;
+}
+static inline __printf(1, 2) __cold
+int printk_sched(const char *s, ...)
+{
+	return 0;
+}
+static inline int printk_ratelimit(void)
+{
+	return 0;
+}
+static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies,
+					  unsigned int interval_msec)
+{
+	return false;
+}
+
+static inline void log_buf_kexec_setup(void)
+{
+}
+
+static inline void setup_log_buf(int early)
+{
+}
+#endif
+
+extern void dump_stack(void) __cold;
+
+#ifndef pr_fmt
+#define pr_fmt(fmt) fmt
+#endif
+
+#define pr_emerg(fmt, ...) \
+	printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_alert(fmt, ...) \
+	printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_crit(fmt, ...) \
+	printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_err(fmt, ...) \
+	printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warning(fmt, ...) \
+	printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warn pr_warning
+#define pr_notice(fmt, ...) \
+	printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_info(fmt, ...) \
+	printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_cont(fmt, ...) \
+	printk(KERN_CONT fmt, ##__VA_ARGS__)
+
+/* pr_devel() should produce zero code unless DEBUG is defined */
+#ifdef DEBUG
+#define pr_devel(fmt, ...) \
+	printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_devel(fmt, ...) \
+	no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#endif
+
+/* If you are writing a driver, please use dev_dbg instead */
+#if defined(CONFIG_DYNAMIC_DEBUG)
+/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
+#define pr_debug(fmt, ...) \
+	dynamic_pr_debug(fmt, ##__VA_ARGS__)
+#elif defined(DEBUG)
+#define pr_debug(fmt, ...) \
+	printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_debug(fmt, ...) \
+	no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#endif
+
+/*
+ * Print a one-time message (analogous to WARN_ONCE() et al):
+ */
+
+#ifdef CONFIG_PRINTK
+#define printk_once(fmt, ...)			\
+({						\
+	static bool __print_once;		\
+						\
+	if (!__print_once) {			\
+		__print_once = true;		\
+		printk(fmt, ##__VA_ARGS__);	\
+	}					\
+})
+#else
+#define printk_once(fmt, ...)			\
+	no_printk(fmt, ##__VA_ARGS__)
+#endif
+
+#define pr_emerg_once(fmt, ...)					\
+	printk_once(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_alert_once(fmt, ...)					\
+	printk_once(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_crit_once(fmt, ...)					\
+	printk_once(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_err_once(fmt, ...)					\
+	printk_once(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warn_once(fmt, ...)					\
+	printk_once(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_notice_once(fmt, ...)				\
+	printk_once(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_info_once(fmt, ...)					\
+	printk_once(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_cont_once(fmt, ...)					\
+	printk_once(KERN_CONT pr_fmt(fmt), ##__VA_ARGS__)
+/* If you are writing a driver, please use dev_dbg instead */
+#if defined(DEBUG)
+#define pr_debug_once(fmt, ...)					\
+	printk_once(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_debug_once(fmt, ...)					\
+	no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#endif
+
+/*
+ * ratelimited messages with local ratelimit_state,
+ * no local ratelimit_state used in the !PRINTK case
+ */
+#ifdef CONFIG_PRINTK
+#define printk_ratelimited(fmt, ...)					\
+({									\
+	static DEFINE_RATELIMIT_STATE(_rs,				\
+				      DEFAULT_RATELIMIT_INTERVAL,	\
+				      DEFAULT_RATELIMIT_BURST);		\
+									\
+	if (__ratelimit(&_rs))						\
+		printk(fmt, ##__VA_ARGS__);				\
+})
+#else
+#define printk_ratelimited(fmt, ...)					\
+	no_printk(fmt, ##__VA_ARGS__)
+#endif
+
+#define pr_emerg_ratelimited(fmt, ...)					\
+	printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_alert_ratelimited(fmt, ...)					\
+	printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_crit_ratelimited(fmt, ...)					\
+	printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_err_ratelimited(fmt, ...)					\
+	printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warn_ratelimited(fmt, ...)					\
+	printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_notice_ratelimited(fmt, ...)					\
+	printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_info_ratelimited(fmt, ...)					\
+	printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
+/* no pr_cont_ratelimited, don't do that... */
+/* If you are writing a driver, please use dev_dbg instead */
+#if defined(DEBUG)
+#define pr_debug_ratelimited(fmt, ...)					\
+	printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_debug_ratelimited(fmt, ...) \
+	no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#endif
+
+enum {
+	DUMP_PREFIX_NONE,
+	DUMP_PREFIX_ADDRESS,
+	DUMP_PREFIX_OFFSET
+};
+extern void hex_dump_to_buffer(const void *buf, size_t len,
+			       int rowsize, int groupsize,
+			       char *linebuf, size_t linebuflen, bool ascii);
+#ifdef CONFIG_PRINTK
+extern void print_hex_dump(const char *level, const char *prefix_str,
+			   int prefix_type, int rowsize, int groupsize,
+			   const void *buf, size_t len, bool ascii);
+extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
+				 const void *buf, size_t len);
+#else
+static inline void print_hex_dump(const char *level, const char *prefix_str,
+				  int prefix_type, int rowsize, int groupsize,
+				  const void *buf, size_t len, bool ascii)
+{
+}
+static inline void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
+					const void *buf, size_t len)
+{
+}
+
+#endif
+
+#endif
diff --git a/include/linux/prio_heap.h b/include/linux/prio_heap.h
new file mode 100644
index 00000000..08094350
--- /dev/null
+++ b/include/linux/prio_heap.h
@@ -0,0 +1,58 @@
+#ifndef _LINUX_PRIO_HEAP_H
+#define _LINUX_PRIO_HEAP_H
+
+/*
+ * Simple insertion-only static-sized priority heap containing
+ * pointers, based on CLR, chapter 7
+ */
+
+#include <linux/gfp.h>
+
+/**
+ * struct ptr_heap - simple static-sized priority heap
+ * @ptrs - pointer to data area
+ * @max - max number of elements that can be stored in @ptrs
+ * @size - current number of valid elements in @ptrs (in the range 0..@size-1
+ * @gt: comparison operator, which should implement "greater than"
+ */
+struct ptr_heap {
+	void **ptrs;
+	int max;
+	int size;
+	int (*gt)(void *, void *);
+};
+
+/**
+ * heap_init - initialize an empty heap with a given memory size
+ * @heap: the heap structure to be initialized
+ * @size: amount of memory to use in bytes
+ * @gfp_mask: mask to pass to kmalloc()
+ * @gt: comparison operator, which should implement "greater than"
+ */
+extern int heap_init(struct ptr_heap *heap, size_t size, gfp_t gfp_mask,
+		     int (*gt)(void *, void *));
+
+/**
+ * heap_free - release a heap's storage
+ * @heap: the heap structure whose data should be released
+ */
+void heap_free(struct ptr_heap *heap);
+
+/**
+ * heap_insert - insert a value into the heap and return any overflowed value
+ * @heap: the heap to be operated on
+ * @p: the pointer to be inserted
+ *
+ * Attempts to insert the given value into the priority heap. If the
+ * heap is full prior to the insertion, then the resulting heap will
+ * consist of the smallest @max elements of the original heap and the
+ * new element; the greatest element will be removed from the heap and
+ * returned. Note that the returned element will be the new element
+ * (i.e. no change to the heap) if the new element is greater than all
+ * elements currently in the heap.
+ */
+extern void *heap_insert(struct ptr_heap *heap, void *p);
+
+
+
+#endif /* _LINUX_PRIO_HEAP_H */
diff --git a/include/linux/prio_tree.h b/include/linux/prio_tree.h
new file mode 100644
index 00000000..db04abb5
--- /dev/null
+++ b/include/linux/prio_tree.h
@@ -0,0 +1,120 @@
+#ifndef _LINUX_PRIO_TREE_H
+#define _LINUX_PRIO_TREE_H
+
+/*
+ * K&R 2nd ed. A8.3 somewhat obliquely hints that initial sequences of struct
+ * fields with identical types should end up at the same location. We'll use
+ * this until we can scrap struct raw_prio_tree_node.
+ *
+ * Note: all this could be done more elegantly by using unnamed union/struct
+ * fields. However, gcc 2.95.3 and apparently also gcc 3.0.4 don't support this
+ * language extension.
+ */
+
+struct raw_prio_tree_node {
+	struct prio_tree_node	*left;
+	struct prio_tree_node	*right;
+	struct prio_tree_node	*parent;
+};
+
+struct prio_tree_node {
+	struct prio_tree_node	*left;
+	struct prio_tree_node	*right;
+	struct prio_tree_node	*parent;
+	unsigned long		start;
+	unsigned long		last;	/* last location _in_ interval */
+};
+
+struct prio_tree_root {
+	struct prio_tree_node	*prio_tree_node;
+	unsigned short 		index_bits;
+	unsigned short		raw;
+		/*
+		 * 0: nodes are of type struct prio_tree_node
+		 * 1: nodes are of type raw_prio_tree_node
+		 */
+};
+
+struct prio_tree_iter {
+	struct prio_tree_node	*cur;
+	unsigned long		mask;
+	unsigned long		value;
+	int			size_level;
+
+	struct prio_tree_root	*root;
+	pgoff_t			r_index;
+	pgoff_t			h_index;
+};
+
+static inline void prio_tree_iter_init(struct prio_tree_iter *iter,
+		struct prio_tree_root *root, pgoff_t r_index, pgoff_t h_index)
+{
+	iter->root = root;
+	iter->r_index = r_index;
+	iter->h_index = h_index;
+	iter->cur = NULL;
+}
+
+#define __INIT_PRIO_TREE_ROOT(ptr, _raw)	\
+do {					\
+	(ptr)->prio_tree_node = NULL;	\
+	(ptr)->index_bits = 1;		\
+	(ptr)->raw = (_raw);		\
+} while (0)
+
+#define INIT_PRIO_TREE_ROOT(ptr)	__INIT_PRIO_TREE_ROOT(ptr, 0)
+#define INIT_RAW_PRIO_TREE_ROOT(ptr)	__INIT_PRIO_TREE_ROOT(ptr, 1)
+
+#define INIT_PRIO_TREE_NODE(ptr)				\
+do {								\
+	(ptr)->left = (ptr)->right = (ptr)->parent = (ptr);	\
+} while (0)
+
+#define INIT_PRIO_TREE_ITER(ptr)	\
+do {					\
+	(ptr)->cur = NULL;		\
+	(ptr)->mask = 0UL;		\
+	(ptr)->value = 0UL;		\
+	(ptr)->size_level = 0;		\
+} while (0)
+
+#define prio_tree_entry(ptr, type, member) \
+       ((type *)((char *)(ptr)-(unsigned long)(&((type *)0)->member)))
+
+static inline int prio_tree_empty(const struct prio_tree_root *root)
+{
+	return root->prio_tree_node == NULL;
+}
+
+static inline int prio_tree_root(const struct prio_tree_node *node)
+{
+	return node->parent == node;
+}
+
+static inline int prio_tree_left_empty(const struct prio_tree_node *node)
+{
+	return node->left == node;
+}
+
+static inline int prio_tree_right_empty(const struct prio_tree_node *node)
+{
+	return node->right == node;
+}
+
+
+struct prio_tree_node *prio_tree_replace(struct prio_tree_root *root,
+                struct prio_tree_node *old, struct prio_tree_node *node);
+struct prio_tree_node *prio_tree_insert(struct prio_tree_root *root,
+                struct prio_tree_node *node);
+void prio_tree_remove(struct prio_tree_root *root, struct prio_tree_node *node);
+struct prio_tree_node *prio_tree_next(struct prio_tree_iter *iter);
+
+#define raw_prio_tree_replace(root, old, node) \
+	prio_tree_replace(root, (struct prio_tree_node *) (old), \
+	    (struct prio_tree_node *) (node))
+#define raw_prio_tree_insert(root, node) \
+	prio_tree_insert(root, (struct prio_tree_node *) (node))
+#define raw_prio_tree_remove(root, node) \
+	prio_tree_remove(root, (struct prio_tree_node *) (node))
+
+#endif /* _LINUX_PRIO_TREE_H */
diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h
new file mode 100644
index 00000000..85c50730
--- /dev/null
+++ b/include/linux/proc_fs.h
@@ -0,0 +1,293 @@
+#ifndef _LINUX_PROC_FS_H
+#define _LINUX_PROC_FS_H
+
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/spinlock.h>
+#include <linux/magic.h>
+#include <linux/atomic.h>
+
+struct net;
+struct completion;
+struct mm_struct;
+
+/*
+ * The proc filesystem constants/structures
+ */
+
+/*
+ * Offset of the first process in the /proc root directory..
+ */
+#define FIRST_PROCESS_ENTRY 256
+
+/* Worst case buffer size needed for holding an integer. */
+#define PROC_NUMBUF 13
+
+/*
+ * We always define these enumerators
+ */
+
+enum {
+	PROC_ROOT_INO = 1,
+};
+
+/*
+ * This is not completely implemented yet. The idea is to
+ * create an in-memory tree (like the actual /proc filesystem
+ * tree) of these proc_dir_entries, so that we can dynamically
+ * add new files to /proc.
+ *
+ * The "next" pointer creates a linked list of one /proc directory,
+ * while parent/subdir create the directory structure (every
+ * /proc file has a parent, but "subdir" is NULL for all
+ * non-directory entries).
+ */
+
+typedef	int (read_proc_t)(char *page, char **start, off_t off,
+			  int count, int *eof, void *data);
+typedef	int (write_proc_t)(struct file *file, const char __user *buffer,
+			   unsigned long count, void *data);
+
+struct proc_dir_entry {
+	unsigned int low_ino;
+	umode_t mode;
+	nlink_t nlink;
+	uid_t uid;
+	gid_t gid;
+	loff_t size;
+	const struct inode_operations *proc_iops;
+	/*
+	 * NULL ->proc_fops means "PDE is going away RSN" or
+	 * "PDE is just created". In either case, e.g. ->read_proc won't be
+	 * called because it's too late or too early, respectively.
+	 *
+	 * If you're allocating ->proc_fops dynamically, save a pointer
+	 * somewhere.
+	 */
+	const struct file_operations *proc_fops;
+	struct proc_dir_entry *next, *parent, *subdir;
+	void *data;
+	read_proc_t *read_proc;
+	write_proc_t *write_proc;
+	atomic_t count;		/* use count */
+	int pde_users;	/* number of callers into module in progress */
+	struct completion *pde_unload_completion;
+	struct list_head pde_openers;	/* who did ->open, but not ->release */
+	spinlock_t pde_unload_lock; /* proc_fops checks and pde_users bumps */
+	u8 namelen;
+	char name[];
+};
+
+enum kcore_type {
+	KCORE_TEXT,
+	KCORE_VMALLOC,
+	KCORE_RAM,
+	KCORE_VMEMMAP,
+	KCORE_OTHER,
+};
+
+struct kcore_list {
+	struct list_head list;
+	unsigned long addr;
+	size_t size;
+	int type;
+};
+
+struct vmcore {
+	struct list_head list;
+	unsigned long long paddr;
+	unsigned long long size;
+	loff_t offset;
+};
+
+#ifdef CONFIG_PROC_FS
+
+extern void proc_root_init(void);
+
+void proc_flush_task(struct task_struct *task);
+
+extern struct proc_dir_entry *create_proc_entry(const char *name, umode_t mode,
+						struct proc_dir_entry *parent);
+struct proc_dir_entry *proc_create_data(const char *name, umode_t mode,
+				struct proc_dir_entry *parent,
+				const struct file_operations *proc_fops,
+				void *data);
+extern void remove_proc_entry(const char *name, struct proc_dir_entry *parent);
+
+struct pid_namespace;
+
+extern int pid_ns_prepare_proc(struct pid_namespace *ns);
+extern void pid_ns_release_proc(struct pid_namespace *ns);
+
+/*
+ * proc_tty.c
+ */
+struct tty_driver;
+extern void proc_tty_init(void);
+extern void proc_tty_register_driver(struct tty_driver *driver);
+extern void proc_tty_unregister_driver(struct tty_driver *driver);
+
+/*
+ * proc_devtree.c
+ */
+#ifdef CONFIG_PROC_DEVICETREE
+struct device_node;
+struct property;
+extern void proc_device_tree_init(void);
+extern void proc_device_tree_add_node(struct device_node *, struct proc_dir_entry *);
+extern void proc_device_tree_add_prop(struct proc_dir_entry *pde, struct property *prop);
+extern void proc_device_tree_remove_prop(struct proc_dir_entry *pde,
+					 struct property *prop);
+extern void proc_device_tree_update_prop(struct proc_dir_entry *pde,
+					 struct property *newprop,
+					 struct property *oldprop);
+#endif /* CONFIG_PROC_DEVICETREE */
+
+extern struct proc_dir_entry *proc_symlink(const char *,
+		struct proc_dir_entry *, const char *);
+extern struct proc_dir_entry *proc_mkdir(const char *,struct proc_dir_entry *);
+extern struct proc_dir_entry *proc_mkdir_mode(const char *name, umode_t mode,
+			struct proc_dir_entry *parent);
+
+static inline struct proc_dir_entry *proc_create(const char *name, umode_t mode,
+	struct proc_dir_entry *parent, const struct file_operations *proc_fops)
+{
+	return proc_create_data(name, mode, parent, proc_fops, NULL);
+}
+
+static inline struct proc_dir_entry *create_proc_read_entry(const char *name,
+	umode_t mode, struct proc_dir_entry *base, 
+	read_proc_t *read_proc, void * data)
+{
+	struct proc_dir_entry *res=create_proc_entry(name,mode,base);
+	if (res) {
+		res->read_proc=read_proc;
+		res->data=data;
+	}
+	return res;
+}
+ 
+extern struct proc_dir_entry *proc_net_fops_create(struct net *net,
+	const char *name, umode_t mode, const struct file_operations *fops);
+extern void proc_net_remove(struct net *net, const char *name);
+extern struct proc_dir_entry *proc_net_mkdir(struct net *net, const char *name,
+	struct proc_dir_entry *parent);
+
+extern struct file *proc_ns_fget(int fd);
+
+#else
+
+#define proc_net_fops_create(net, name, mode, fops)  ({ (void)(mode), NULL; })
+static inline void proc_net_remove(struct net *net, const char *name) {}
+
+static inline void proc_flush_task(struct task_struct *task)
+{
+}
+
+static inline struct proc_dir_entry *create_proc_entry(const char *name,
+	umode_t mode, struct proc_dir_entry *parent) { return NULL; }
+static inline struct proc_dir_entry *proc_create(const char *name,
+	umode_t mode, struct proc_dir_entry *parent,
+	const struct file_operations *proc_fops)
+{
+	return NULL;
+}
+static inline struct proc_dir_entry *proc_create_data(const char *name,
+	umode_t mode, struct proc_dir_entry *parent,
+	const struct file_operations *proc_fops, void *data)
+{
+	return NULL;
+}
+#define remove_proc_entry(name, parent) do {} while (0)
+
+static inline struct proc_dir_entry *proc_symlink(const char *name,
+		struct proc_dir_entry *parent,const char *dest) {return NULL;}
+static inline struct proc_dir_entry *proc_mkdir(const char *name,
+	struct proc_dir_entry *parent) {return NULL;}
+static inline struct proc_dir_entry *proc_mkdir_mode(const char *name,
+	umode_t mode, struct proc_dir_entry *parent) { return NULL; }
+
+static inline struct proc_dir_entry *create_proc_read_entry(const char *name,
+	umode_t mode, struct proc_dir_entry *base, 
+	read_proc_t *read_proc, void * data) { return NULL; }
+
+struct tty_driver;
+static inline void proc_tty_register_driver(struct tty_driver *driver) {};
+static inline void proc_tty_unregister_driver(struct tty_driver *driver) {};
+
+static inline int pid_ns_prepare_proc(struct pid_namespace *ns)
+{
+	return 0;
+}
+
+static inline void pid_ns_release_proc(struct pid_namespace *ns)
+{
+}
+
+static inline struct file *proc_ns_fget(int fd)
+{
+	return ERR_PTR(-EINVAL);
+}
+
+#endif /* CONFIG_PROC_FS */
+
+#if !defined(CONFIG_PROC_KCORE)
+static inline void
+kclist_add(struct kcore_list *new, void *addr, size_t size, int type)
+{
+}
+#else
+extern void kclist_add(struct kcore_list *, void *, size_t, int type);
+#endif
+
+struct nsproxy;
+struct proc_ns_operations {
+	const char *name;
+	int type;
+	void *(*get)(struct task_struct *task);
+	void (*put)(void *ns);
+	int (*install)(struct nsproxy *nsproxy, void *ns);
+};
+extern const struct proc_ns_operations netns_operations;
+extern const struct proc_ns_operations utsns_operations;
+extern const struct proc_ns_operations ipcns_operations;
+
+union proc_op {
+	int (*proc_get_link)(struct dentry *, struct path *);
+	int (*proc_read)(struct task_struct *task, char *page);
+	int (*proc_show)(struct seq_file *m,
+		struct pid_namespace *ns, struct pid *pid,
+		struct task_struct *task);
+};
+
+struct ctl_table_header;
+struct ctl_table;
+
+struct proc_inode {
+	struct pid *pid;
+	int fd;
+	union proc_op op;
+	struct proc_dir_entry *pde;
+	struct ctl_table_header *sysctl;
+	struct ctl_table *sysctl_entry;
+	void *ns;
+	const struct proc_ns_operations *ns_ops;
+	struct inode vfs_inode;
+};
+
+static inline struct proc_inode *PROC_I(const struct inode *inode)
+{
+	return container_of(inode, struct proc_inode, vfs_inode);
+}
+
+static inline struct proc_dir_entry *PDE(const struct inode *inode)
+{
+	return PROC_I(inode)->pde;
+}
+
+static inline struct net *PDE_NET(struct proc_dir_entry *pde)
+{
+	return pde->parent->data;
+}
+
+#endif /* _LINUX_PROC_FS_H */
diff --git a/include/linux/profile.h b/include/linux/profile.h
new file mode 100644
index 00000000..a0fc3227
--- /dev/null
+++ b/include/linux/profile.h
@@ -0,0 +1,150 @@
+#ifndef _LINUX_PROFILE_H
+#define _LINUX_PROFILE_H
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/cpumask.h>
+#include <linux/cache.h>
+
+#include <asm/errno.h>
+
+#define CPU_PROFILING	1
+#define SCHED_PROFILING	2
+#define SLEEP_PROFILING	3
+#define KVM_PROFILING	4
+
+struct proc_dir_entry;
+struct pt_regs;
+struct notifier_block;
+
+#if defined(CONFIG_PROFILING) && defined(CONFIG_PROC_FS)
+void create_prof_cpu_mask(struct proc_dir_entry *de);
+int create_proc_profile(void);
+#else
+static inline void create_prof_cpu_mask(struct proc_dir_entry *de)
+{
+}
+
+static inline int create_proc_profile(void)
+{
+	return 0;
+}
+#endif
+
+enum profile_type {
+	PROFILE_TASK_EXIT,
+	PROFILE_MUNMAP
+};
+
+#ifdef CONFIG_PROFILING
+
+extern int prof_on __read_mostly;
+
+/* init basic kernel profiler */
+int profile_init(void);
+int profile_setup(char *str);
+void profile_tick(int type);
+
+/*
+ * Add multiple profiler hits to a given address:
+ */
+void profile_hits(int type, void *ip, unsigned int nr_hits);
+
+/*
+ * Single profiler hit:
+ */
+static inline void profile_hit(int type, void *ip)
+{
+	/*
+	 * Speedup for the common (no profiling enabled) case:
+	 */
+	if (unlikely(prof_on == type))
+		profile_hits(type, ip, 1);
+}
+
+struct task_struct;
+struct mm_struct;
+
+/* task is in do_exit() */
+void profile_task_exit(struct task_struct * task);
+
+/* task is dead, free task struct ? Returns 1 if
+ * the task was taken, 0 if the task should be freed.
+ */
+int profile_handoff_task(struct task_struct * task);
+
+/* sys_munmap */
+void profile_munmap(unsigned long addr);
+
+int task_handoff_register(struct notifier_block * n);
+int task_handoff_unregister(struct notifier_block * n);
+
+int profile_event_register(enum profile_type, struct notifier_block * n);
+int profile_event_unregister(enum profile_type, struct notifier_block * n);
+
+int register_timer_hook(int (*hook)(struct pt_regs *));
+void unregister_timer_hook(int (*hook)(struct pt_regs *));
+
+struct pt_regs;
+
+#else
+
+#define prof_on 0
+
+static inline int profile_init(void)
+{
+	return 0;
+}
+
+static inline void profile_tick(int type)
+{
+	return;
+}
+
+static inline void profile_hits(int type, void *ip, unsigned int nr_hits)
+{
+	return;
+}
+
+static inline void profile_hit(int type, void *ip)
+{
+	return;
+}
+
+static inline int task_handoff_register(struct notifier_block * n)
+{
+	return -ENOSYS;
+}
+
+static inline int task_handoff_unregister(struct notifier_block * n)
+{
+	return -ENOSYS;
+}
+
+static inline int profile_event_register(enum profile_type t, struct notifier_block * n)
+{
+	return -ENOSYS;
+}
+
+static inline int profile_event_unregister(enum profile_type t, struct notifier_block * n)
+{
+	return -ENOSYS;
+}
+
+#define profile_task_exit(a) do { } while (0)
+#define profile_handoff_task(a) (0)
+#define profile_munmap(a) do { } while (0)
+
+static inline int register_timer_hook(int (*hook)(struct pt_regs *))
+{
+	return -ENOSYS;
+}
+
+static inline void unregister_timer_hook(int (*hook)(struct pt_regs *))
+{
+	return;
+}
+
+#endif /* CONFIG_PROFILING */
+
+#endif /* _LINUX_PROFILE_H */
diff --git a/include/linux/proportions.h b/include/linux/proportions.h
new file mode 100644
index 00000000..26a8a4ed
--- /dev/null
+++ b/include/linux/proportions.h
@@ -0,0 +1,136 @@
+/*
+ * FLoating proportions
+ *
+ *  Copyright (C) 2007 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
+ *
+ * This file contains the public data structure and API definitions.
+ */
+
+#ifndef _LINUX_PROPORTIONS_H
+#define _LINUX_PROPORTIONS_H
+
+#include <linux/percpu_counter.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+
+struct prop_global {
+	/*
+	 * The period over which we differentiate
+	 *
+	 *   period = 2^shift
+	 */
+	int shift;
+	/*
+	 * The total event counter aka 'time'.
+	 *
+	 * Treated as an unsigned long; the lower 'shift - 1' bits are the
+	 * counter bits, the remaining upper bits the period counter.
+	 */
+	struct percpu_counter events;
+};
+
+/*
+ * global proportion descriptor
+ *
+ * this is needed to consitently flip prop_global structures.
+ */
+struct prop_descriptor {
+	int index;
+	struct prop_global pg[2];
+	struct mutex mutex;		/* serialize the prop_global switch */
+};
+
+int prop_descriptor_init(struct prop_descriptor *pd, int shift);
+void prop_change_shift(struct prop_descriptor *pd, int new_shift);
+
+/*
+ * ----- PERCPU ------
+ */
+
+struct prop_local_percpu {
+	/*
+	 * the local events counter
+	 */
+	struct percpu_counter events;
+
+	/*
+	 * snapshot of the last seen global state
+	 */
+	int shift;
+	unsigned long period;
+	raw_spinlock_t lock;		/* protect the snapshot state */
+};
+
+int prop_local_init_percpu(struct prop_local_percpu *pl);
+void prop_local_destroy_percpu(struct prop_local_percpu *pl);
+void __prop_inc_percpu(struct prop_descriptor *pd, struct prop_local_percpu *pl);
+void prop_fraction_percpu(struct prop_descriptor *pd, struct prop_local_percpu *pl,
+		long *numerator, long *denominator);
+
+static inline
+void prop_inc_percpu(struct prop_descriptor *pd, struct prop_local_percpu *pl)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	__prop_inc_percpu(pd, pl);
+	local_irq_restore(flags);
+}
+
+/*
+ * Limit the time part in order to ensure there are some bits left for the
+ * cycle counter and fraction multiply.
+ */
+#if BITS_PER_LONG == 32
+#define PROP_MAX_SHIFT (3*BITS_PER_LONG/4)
+#else
+#define PROP_MAX_SHIFT (BITS_PER_LONG/2)
+#endif
+
+#define PROP_FRAC_SHIFT		(BITS_PER_LONG - PROP_MAX_SHIFT - 1)
+#define PROP_FRAC_BASE		(1UL << PROP_FRAC_SHIFT)
+
+void __prop_inc_percpu_max(struct prop_descriptor *pd,
+			   struct prop_local_percpu *pl, long frac);
+
+
+/*
+ * ----- SINGLE ------
+ */
+
+struct prop_local_single {
+	/*
+	 * the local events counter
+	 */
+	unsigned long events;
+
+	/*
+	 * snapshot of the last seen global state
+	 * and a lock protecting this state
+	 */
+	unsigned long period;
+	int shift;
+	raw_spinlock_t lock;		/* protect the snapshot state */
+};
+
+#define INIT_PROP_LOCAL_SINGLE(name)			\
+{	.lock = __RAW_SPIN_LOCK_UNLOCKED(name.lock),	\
+}
+
+int prop_local_init_single(struct prop_local_single *pl);
+void prop_local_destroy_single(struct prop_local_single *pl);
+void __prop_inc_single(struct prop_descriptor *pd, struct prop_local_single *pl);
+void prop_fraction_single(struct prop_descriptor *pd, struct prop_local_single *pl,
+		long *numerator, long *denominator);
+
+static inline
+void prop_inc_single(struct prop_descriptor *pd, struct prop_local_single *pl)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	__prop_inc_single(pd, pl);
+	local_irq_restore(flags);
+}
+
+#endif /* _LINUX_PROPORTIONS_H */
diff --git a/include/linux/pstore.h b/include/linux/pstore.h
new file mode 100644
index 00000000..e1461e14
--- /dev/null
+++ b/include/linux/pstore.h
@@ -0,0 +1,65 @@
+/*
+ * Persistent Storage - pstore.h
+ *
+ * Copyright (C) 2010 Intel Corporation <tony.luck@intel.com>
+ *
+ * This code is the generic layer to export data records from platform
+ * level persistent storage via a file system.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef _LINUX_PSTORE_H
+#define _LINUX_PSTORE_H
+
+#include <linux/time.h>
+#include <linux/kmsg_dump.h>
+
+/* types */
+enum pstore_type_id {
+	PSTORE_TYPE_DMESG	= 0,
+	PSTORE_TYPE_MCE		= 1,
+	PSTORE_TYPE_UNKNOWN	= 255
+};
+
+struct pstore_info {
+	struct module	*owner;
+	char		*name;
+	spinlock_t	buf_lock;	/* serialize access to 'buf' */
+	char		*buf;
+	size_t		bufsize;
+	struct mutex	read_mutex;	/* serialize open/read/close */
+	int		(*open)(struct pstore_info *psi);
+	int		(*close)(struct pstore_info *psi);
+	ssize_t		(*read)(u64 *id, enum pstore_type_id *type,
+			struct timespec *time, char **buf,
+			struct pstore_info *psi);
+	int		(*write)(enum pstore_type_id type,
+			enum kmsg_dump_reason reason, u64 *id,
+			unsigned int part, size_t size, struct pstore_info *psi);
+	int		(*erase)(enum pstore_type_id type, u64 id,
+			struct pstore_info *psi);
+	void		*data;
+};
+
+#ifdef CONFIG_PSTORE
+extern int pstore_register(struct pstore_info *);
+#else
+static inline int
+pstore_register(struct pstore_info *psi)
+{
+	return -ENODEV;
+}
+#endif
+
+#endif /*_LINUX_PSTORE_H*/
diff --git a/include/linux/pti.h b/include/linux/pti.h
new file mode 100644
index 00000000..b3ea01a3
--- /dev/null
+++ b/include/linux/pti.h
@@ -0,0 +1,43 @@
+/*
+ *  Copyright (C) Intel 2011
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * The PTI (Parallel Trace Interface) driver directs trace data routed from
+ * various parts in the system out through the Intel Penwell PTI port and
+ * out of the mobile device for analysis with a debugging tool
+ * (Lauterbach, Fido). This is part of a solution for the MIPI P1149.7,
+ * compact JTAG, standard.
+ *
+ * This header file will allow other parts of the OS to use the
+ * interface to write out it's contents for debugging a mobile system.
+ */
+
+#ifndef PTI_H_
+#define PTI_H_
+
+/* offset for last dword of any PTI message. Part of MIPI P1149.7 */
+#define PTI_LASTDWORD_DTS	0x30
+
+/* basic structure used as a write address to the PTI HW */
+struct pti_masterchannel {
+	u8 master;
+	u8 channel;
+};
+
+/* the following functions are defined in misc/pti.c */
+void pti_writedata(struct pti_masterchannel *mc, u8 *buf, int count);
+struct pti_masterchannel *pti_request_masterchannel(u8 type,
+						    const char *thread_name);
+void pti_release_masterchannel(struct pti_masterchannel *mc);
+
+#endif /*PTI_H_*/
diff --git a/include/linux/ptp_classify.h b/include/linux/ptp_classify.h
new file mode 100644
index 00000000..1dc420ba
--- /dev/null
+++ b/include/linux/ptp_classify.h
@@ -0,0 +1,140 @@
+/*
+ * PTP 1588 support
+ *
+ * This file implements a BPF that recognizes PTP event messages.
+ *
+ * Copyright (C) 2010 OMICRON electronics GmbH
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _PTP_CLASSIFY_H_
+#define _PTP_CLASSIFY_H_
+
+#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
+#include <linux/ip.h>
+#include <linux/filter.h>
+#ifdef __KERNEL__
+#include <linux/in.h>
+#else
+#include <netinet/in.h>
+#endif
+
+#define PTP_CLASS_NONE  0x00 /* not a PTP event message */
+#define PTP_CLASS_V1    0x01 /* protocol version 1 */
+#define PTP_CLASS_V2    0x02 /* protocol version 2 */
+#define PTP_CLASS_VMASK 0x0f /* max protocol version is 15 */
+#define PTP_CLASS_IPV4  0x10 /* event in an IPV4 UDP packet */
+#define PTP_CLASS_IPV6  0x20 /* event in an IPV6 UDP packet */
+#define PTP_CLASS_L2    0x30 /* event in a L2 packet */
+#define PTP_CLASS_VLAN  0x40 /* event in a VLAN tagged L2 packet */
+#define PTP_CLASS_PMASK 0xf0 /* mask for the packet type field */
+
+#define PTP_CLASS_V1_IPV4 (PTP_CLASS_V1 | PTP_CLASS_IPV4)
+#define PTP_CLASS_V1_IPV6 (PTP_CLASS_V1 | PTP_CLASS_IPV6) /*probably DNE*/
+#define PTP_CLASS_V2_IPV4 (PTP_CLASS_V2 | PTP_CLASS_IPV4)
+#define PTP_CLASS_V2_IPV6 (PTP_CLASS_V2 | PTP_CLASS_IPV6)
+#define PTP_CLASS_V2_L2   (PTP_CLASS_V2 | PTP_CLASS_L2)
+#define PTP_CLASS_V2_VLAN (PTP_CLASS_V2 | PTP_CLASS_VLAN)
+
+#define PTP_EV_PORT 319
+#define PTP_GEN_BIT 0x08 /* indicates general message, if set in message type */
+
+#define OFF_ETYPE	12
+#define OFF_IHL		14
+#define OFF_FRAG	20
+#define OFF_PROTO4	23
+#define OFF_NEXT	6
+#define OFF_UDP_DST	2
+
+#define OFF_PTP_SOURCE_UUID	22 /* PTPv1 only */
+#define OFF_PTP_SEQUENCE_ID	30
+#define OFF_PTP_CONTROL		32 /* PTPv1 only */
+
+#define IPV4_HLEN(data) (((struct iphdr *)(data + OFF_IHL))->ihl << 2)
+
+#define IP6_HLEN	40
+#define UDP_HLEN	8
+
+#define RELOFF_DST4	(ETH_HLEN + OFF_UDP_DST)
+#define OFF_DST6	(ETH_HLEN + IP6_HLEN + OFF_UDP_DST)
+#define OFF_PTP6	(ETH_HLEN + IP6_HLEN + UDP_HLEN)
+
+#define OP_AND	(BPF_ALU | BPF_AND  | BPF_K)
+#define OP_JEQ	(BPF_JMP | BPF_JEQ  | BPF_K)
+#define OP_JSET	(BPF_JMP | BPF_JSET | BPF_K)
+#define OP_LDB	(BPF_LD  | BPF_B    | BPF_ABS)
+#define OP_LDH	(BPF_LD  | BPF_H    | BPF_ABS)
+#define OP_LDHI	(BPF_LD  | BPF_H    | BPF_IND)
+#define OP_LDX	(BPF_LDX | BPF_B    | BPF_MSH)
+#define OP_OR	(BPF_ALU | BPF_OR   | BPF_K)
+#define OP_RETA	(BPF_RET | BPF_A)
+#define OP_RETK	(BPF_RET | BPF_K)
+
+static inline int ptp_filter_init(struct sock_filter *f, int len)
+{
+	if (OP_LDH == f[0].code)
+		return sk_chk_filter(f, len);
+	else
+		return 0;
+}
+
+#define PTP_FILTER \
+	{OP_LDH,	0,   0, OFF_ETYPE		}, /*              */ \
+	{OP_JEQ,	0,  12, ETH_P_IP		}, /* f goto L20   */ \
+	{OP_LDB,	0,   0, OFF_PROTO4		}, /*              */ \
+	{OP_JEQ,	0,   9, IPPROTO_UDP		}, /* f goto L10   */ \
+	{OP_LDH,	0,   0, OFF_FRAG		}, /*              */ \
+	{OP_JSET,	7,   0, 0x1fff			}, /* t goto L11   */ \
+	{OP_LDX,	0,   0, OFF_IHL			}, /*              */ \
+	{OP_LDHI,	0,   0, RELOFF_DST4		}, /*              */ \
+	{OP_JEQ,	0,   4, PTP_EV_PORT		}, /* f goto L12   */ \
+	{OP_LDHI,	0,   0, ETH_HLEN + UDP_HLEN	}, /*              */ \
+	{OP_AND,	0,   0, PTP_CLASS_VMASK		}, /*              */ \
+	{OP_OR,		0,   0, PTP_CLASS_IPV4		}, /*              */ \
+	{OP_RETA,	0,   0, 0			}, /*              */ \
+/*L1x*/	{OP_RETK,	0,   0, PTP_CLASS_NONE		}, /*              */ \
+/*L20*/	{OP_JEQ,	0,   9, ETH_P_IPV6		}, /* f goto L40   */ \
+	{OP_LDB,	0,   0, ETH_HLEN + OFF_NEXT	}, /*              */ \
+	{OP_JEQ,	0,   6, IPPROTO_UDP		}, /* f goto L30   */ \
+	{OP_LDH,	0,   0, OFF_DST6		}, /*              */ \
+	{OP_JEQ,	0,   4, PTP_EV_PORT		}, /* f goto L31   */ \
+	{OP_LDH,	0,   0, OFF_PTP6		}, /*              */ \
+	{OP_AND,	0,   0, PTP_CLASS_VMASK		}, /*              */ \
+	{OP_OR,		0,   0, PTP_CLASS_IPV6		}, /*              */ \
+	{OP_RETA,	0,   0, 0			}, /*              */ \
+/*L3x*/	{OP_RETK,	0,   0, PTP_CLASS_NONE		}, /*              */ \
+/*L40*/	{OP_JEQ,	0,   9, ETH_P_8021Q		}, /* f goto L50   */ \
+	{OP_LDH,	0,   0, OFF_ETYPE + 4		}, /*              */ \
+	{OP_JEQ,	0,  15, ETH_P_1588		}, /* f goto L60   */ \
+	{OP_LDB,	0,   0, ETH_HLEN + VLAN_HLEN	}, /*              */ \
+	{OP_AND,	0,   0, PTP_GEN_BIT		}, /*              */ \
+	{OP_JEQ,	0,  12, 0			}, /* f goto L6x   */ \
+	{OP_LDH,	0,   0, ETH_HLEN + VLAN_HLEN	}, /*              */ \
+	{OP_AND,	0,   0, PTP_CLASS_VMASK		}, /*              */ \
+	{OP_OR,		0,   0, PTP_CLASS_VLAN		}, /*              */ \
+	{OP_RETA,	0,   0, 0			}, /*              */ \
+/*L50*/	{OP_JEQ,	0,   7, ETH_P_1588		}, /* f goto L61   */ \
+	{OP_LDB,	0,   0, ETH_HLEN		}, /*              */ \
+	{OP_AND,	0,   0, PTP_GEN_BIT		}, /*              */ \
+	{OP_JEQ,	0,   4, 0			}, /* f goto L6x   */ \
+	{OP_LDH,	0,   0, ETH_HLEN		}, /*              */ \
+	{OP_AND,	0,   0, PTP_CLASS_VMASK		}, /*              */ \
+	{OP_OR,		0,   0, PTP_CLASS_L2		}, /*              */ \
+	{OP_RETA,	0,   0, 0			}, /*              */ \
+/*L6x*/	{OP_RETK,	0,   0, PTP_CLASS_NONE		},
+
+#endif
diff --git a/include/linux/ptp_clock.h b/include/linux/ptp_clock.h
new file mode 100644
index 00000000..94e981f8
--- /dev/null
+++ b/include/linux/ptp_clock.h
@@ -0,0 +1,84 @@
+/*
+ * PTP 1588 clock support - user space interface
+ *
+ * Copyright (C) 2010 OMICRON electronics GmbH
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _PTP_CLOCK_H_
+#define _PTP_CLOCK_H_
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/* PTP_xxx bits, for the flags field within the request structures. */
+#define PTP_ENABLE_FEATURE (1<<0)
+#define PTP_RISING_EDGE    (1<<1)
+#define PTP_FALLING_EDGE   (1<<2)
+
+/*
+ * struct ptp_clock_time - represents a time value
+ *
+ * The sign of the seconds field applies to the whole value. The
+ * nanoseconds field is always unsigned. The reserved field is
+ * included for sub-nanosecond resolution, should the demand for
+ * this ever appear.
+ *
+ */
+struct ptp_clock_time {
+	__s64 sec;  /* seconds */
+	__u32 nsec; /* nanoseconds */
+	__u32 reserved;
+};
+
+struct ptp_clock_caps {
+	int max_adj;   /* Maximum frequency adjustment in parts per billon. */
+	int n_alarm;   /* Number of programmable alarms. */
+	int n_ext_ts;  /* Number of external time stamp channels. */
+	int n_per_out; /* Number of programmable periodic signals. */
+	int pps;       /* Whether the clock supports a PPS callback. */
+	int rsv[15];   /* Reserved for future use. */
+};
+
+struct ptp_extts_request {
+	unsigned int index;  /* Which channel to configure. */
+	unsigned int flags;  /* Bit field for PTP_xxx flags. */
+	unsigned int rsv[2]; /* Reserved for future use. */
+};
+
+struct ptp_perout_request {
+	struct ptp_clock_time start;  /* Absolute start time. */
+	struct ptp_clock_time period; /* Desired period, zero means disable. */
+	unsigned int index;           /* Which channel to configure. */
+	unsigned int flags;           /* Reserved for future use. */
+	unsigned int rsv[4];          /* Reserved for future use. */
+};
+
+#define PTP_CLK_MAGIC '='
+
+#define PTP_CLOCK_GETCAPS  _IOR(PTP_CLK_MAGIC, 1, struct ptp_clock_caps)
+#define PTP_EXTTS_REQUEST  _IOW(PTP_CLK_MAGIC, 2, struct ptp_extts_request)
+#define PTP_PEROUT_REQUEST _IOW(PTP_CLK_MAGIC, 3, struct ptp_perout_request)
+#define PTP_ENABLE_PPS     _IOW(PTP_CLK_MAGIC, 4, int)
+
+struct ptp_extts_event {
+	struct ptp_clock_time t; /* Time event occured. */
+	unsigned int index;      /* Which channel produced the event. */
+	unsigned int flags;      /* Reserved for future use. */
+	unsigned int rsv[2];     /* Reserved for future use. */
+};
+
+#endif
diff --git a/include/linux/ptp_clock_kernel.h b/include/linux/ptp_clock_kernel.h
new file mode 100644
index 00000000..dd2e44fb
--- /dev/null
+++ b/include/linux/ptp_clock_kernel.h
@@ -0,0 +1,139 @@
+/*
+ * PTP 1588 clock support
+ *
+ * Copyright (C) 2010 OMICRON electronics GmbH
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _PTP_CLOCK_KERNEL_H_
+#define _PTP_CLOCK_KERNEL_H_
+
+#include <linux/ptp_clock.h>
+
+
+struct ptp_clock_request {
+	enum {
+		PTP_CLK_REQ_EXTTS,
+		PTP_CLK_REQ_PEROUT,
+		PTP_CLK_REQ_PPS,
+	} type;
+	union {
+		struct ptp_extts_request extts;
+		struct ptp_perout_request perout;
+	};
+};
+
+/**
+ * struct ptp_clock_info - decribes a PTP hardware clock
+ *
+ * @owner:     The clock driver should set to THIS_MODULE.
+ * @name:      A short name to identify the clock.
+ * @max_adj:   The maximum possible frequency adjustment, in parts per billon.
+ * @n_alarm:   The number of programmable alarms.
+ * @n_ext_ts:  The number of external time stamp channels.
+ * @n_per_out: The number of programmable periodic signals.
+ * @pps:       Indicates whether the clock supports a PPS callback.
+ *
+ * clock operations
+ *
+ * @adjfreq:  Adjusts the frequency of the hardware clock.
+ *            parameter delta: Desired period change in parts per billion.
+ *
+ * @adjtime:  Shifts the time of the hardware clock.
+ *            parameter delta: Desired change in nanoseconds.
+ *
+ * @gettime:  Reads the current time from the hardware clock.
+ *            parameter ts: Holds the result.
+ *
+ * @settime:  Set the current time on the hardware clock.
+ *            parameter ts: Time value to set.
+ *
+ * @enable:   Request driver to enable or disable an ancillary feature.
+ *            parameter request: Desired resource to enable or disable.
+ *            parameter on: Caller passes one to enable or zero to disable.
+ *
+ * Drivers should embed their ptp_clock_info within a private
+ * structure, obtaining a reference to it using container_of().
+ *
+ * The callbacks must all return zero on success, non-zero otherwise.
+ */
+
+struct ptp_clock_info {
+	struct module *owner;
+	char name[16];
+	s32 max_adj;
+	int n_alarm;
+	int n_ext_ts;
+	int n_per_out;
+	int pps;
+	int (*adjfreq)(struct ptp_clock_info *ptp, s32 delta);
+	int (*adjtime)(struct ptp_clock_info *ptp, s64 delta);
+	int (*gettime)(struct ptp_clock_info *ptp, struct timespec *ts);
+	int (*settime)(struct ptp_clock_info *ptp, const struct timespec *ts);
+	int (*enable)(struct ptp_clock_info *ptp,
+		      struct ptp_clock_request *request, int on);
+};
+
+struct ptp_clock;
+
+/**
+ * ptp_clock_register() - register a PTP hardware clock driver
+ *
+ * @info:  Structure describing the new clock.
+ */
+
+extern struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info);
+
+/**
+ * ptp_clock_unregister() - unregister a PTP hardware clock driver
+ *
+ * @ptp:  The clock to remove from service.
+ */
+
+extern int ptp_clock_unregister(struct ptp_clock *ptp);
+
+
+enum ptp_clock_events {
+	PTP_CLOCK_ALARM,
+	PTP_CLOCK_EXTTS,
+	PTP_CLOCK_PPS,
+};
+
+/**
+ * struct ptp_clock_event - decribes a PTP hardware clock event
+ *
+ * @type:  One of the ptp_clock_events enumeration values.
+ * @index: Identifies the source of the event.
+ * @timestamp: When the event occured.
+ */
+
+struct ptp_clock_event {
+	int type;
+	int index;
+	u64 timestamp;
+};
+
+/**
+ * ptp_clock_event() - notify the PTP layer about an event
+ *
+ * @ptp:    The clock obtained from ptp_clock_register().
+ * @event:  Message structure describing the event.
+ */
+
+extern void ptp_clock_event(struct ptp_clock *ptp,
+			    struct ptp_clock_event *event);
+
+#endif
diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
new file mode 100644
index 00000000..5c719627
--- /dev/null
+++ b/include/linux/ptrace.h
@@ -0,0 +1,416 @@
+#ifndef _LINUX_PTRACE_H
+#define _LINUX_PTRACE_H
+/* ptrace.h */
+/* structs and defines to help the user use the ptrace system call. */
+
+/* has the defines to get at the registers. */
+
+#define PTRACE_TRACEME		   0
+#define PTRACE_PEEKTEXT		   1
+#define PTRACE_PEEKDATA		   2
+#define PTRACE_PEEKUSR		   3
+#define PTRACE_POKETEXT		   4
+#define PTRACE_POKEDATA		   5
+#define PTRACE_POKEUSR		   6
+#define PTRACE_CONT		   7
+#define PTRACE_KILL		   8
+#define PTRACE_SINGLESTEP	   9
+
+#define PTRACE_ATTACH		  16
+#define PTRACE_DETACH		  17
+
+#define PTRACE_SYSCALL		  24
+
+/* 0x4200-0x4300 are reserved for architecture-independent additions.  */
+#define PTRACE_SETOPTIONS	0x4200
+#define PTRACE_GETEVENTMSG	0x4201
+#define PTRACE_GETSIGINFO	0x4202
+#define PTRACE_SETSIGINFO	0x4203
+
+/*
+ * Generic ptrace interface that exports the architecture specific regsets
+ * using the corresponding NT_* types (which are also used in the core dump).
+ * Please note that the NT_PRSTATUS note type in a core dump contains a full
+ * 'struct elf_prstatus'. But the user_regset for NT_PRSTATUS contains just the
+ * elf_gregset_t that is the pr_reg field of 'struct elf_prstatus'. For all the
+ * other user_regset flavors, the user_regset layout and the ELF core dump note
+ * payload are exactly the same layout.
+ *
+ * This interface usage is as follows:
+ *	struct iovec iov = { buf, len};
+ *
+ *	ret = ptrace(PTRACE_GETREGSET/PTRACE_SETREGSET, pid, NT_XXX_TYPE, &iov);
+ *
+ * On the successful completion, iov.len will be updated by the kernel,
+ * specifying how much the kernel has written/read to/from the user's iov.buf.
+ */
+#define PTRACE_GETREGSET	0x4204
+#define PTRACE_SETREGSET	0x4205
+
+#define PTRACE_SEIZE		0x4206
+#define PTRACE_INTERRUPT	0x4207
+#define PTRACE_LISTEN		0x4208
+
+/* Wait extended result codes for the above trace options.  */
+#define PTRACE_EVENT_FORK	1
+#define PTRACE_EVENT_VFORK	2
+#define PTRACE_EVENT_CLONE	3
+#define PTRACE_EVENT_EXEC	4
+#define PTRACE_EVENT_VFORK_DONE	5
+#define PTRACE_EVENT_EXIT	6
+/* Extended result codes which enabled by means other than options.  */
+#define PTRACE_EVENT_STOP	128
+
+/* Options set using PTRACE_SETOPTIONS or using PTRACE_SEIZE @data param */
+#define PTRACE_O_TRACESYSGOOD	1
+#define PTRACE_O_TRACEFORK	(1 << PTRACE_EVENT_FORK)
+#define PTRACE_O_TRACEVFORK	(1 << PTRACE_EVENT_VFORK)
+#define PTRACE_O_TRACECLONE	(1 << PTRACE_EVENT_CLONE)
+#define PTRACE_O_TRACEEXEC	(1 << PTRACE_EVENT_EXEC)
+#define PTRACE_O_TRACEVFORKDONE	(1 << PTRACE_EVENT_VFORK_DONE)
+#define PTRACE_O_TRACEEXIT	(1 << PTRACE_EVENT_EXIT)
+
+#define PTRACE_O_MASK		0x0000007f
+
+#include <asm/ptrace.h>
+
+#ifdef __KERNEL__
+/*
+ * Ptrace flags
+ *
+ * The owner ship rules for task->ptrace which holds the ptrace
+ * flags is simple.  When a task is running it owns it's task->ptrace
+ * flags.  When the a task is stopped the ptracer owns task->ptrace.
+ */
+
+#define PT_SEIZED	0x00010000	/* SEIZE used, enable new behavior */
+#define PT_PTRACED	0x00000001
+#define PT_DTRACE	0x00000002	/* delayed trace (used on m68k, i386) */
+#define PT_PTRACE_CAP	0x00000004	/* ptracer can follow suid-exec */
+
+#define PT_OPT_FLAG_SHIFT	3
+/* PT_TRACE_* event enable flags */
+#define PT_EVENT_FLAG(event)	(1 << (PT_OPT_FLAG_SHIFT + (event)))
+#define PT_TRACESYSGOOD		PT_EVENT_FLAG(0)
+#define PT_TRACE_FORK		PT_EVENT_FLAG(PTRACE_EVENT_FORK)
+#define PT_TRACE_VFORK		PT_EVENT_FLAG(PTRACE_EVENT_VFORK)
+#define PT_TRACE_CLONE		PT_EVENT_FLAG(PTRACE_EVENT_CLONE)
+#define PT_TRACE_EXEC		PT_EVENT_FLAG(PTRACE_EVENT_EXEC)
+#define PT_TRACE_VFORK_DONE	PT_EVENT_FLAG(PTRACE_EVENT_VFORK_DONE)
+#define PT_TRACE_EXIT		PT_EVENT_FLAG(PTRACE_EVENT_EXIT)
+
+/* single stepping state bits (used on ARM and PA-RISC) */
+#define PT_SINGLESTEP_BIT	31
+#define PT_SINGLESTEP		(1<<PT_SINGLESTEP_BIT)
+#define PT_BLOCKSTEP_BIT	30
+#define PT_BLOCKSTEP		(1<<PT_BLOCKSTEP_BIT)
+
+#include <linux/compiler.h>		/* For unlikely.  */
+#include <linux/sched.h>		/* For struct task_struct.  */
+#include <linux/err.h>			/* for IS_ERR_VALUE */
+#include <linux/bug.h>			/* For BUG_ON.  */
+
+
+extern long arch_ptrace(struct task_struct *child, long request,
+			unsigned long addr, unsigned long data);
+extern int ptrace_readdata(struct task_struct *tsk, unsigned long src, char __user *dst, int len);
+extern int ptrace_writedata(struct task_struct *tsk, char __user *src, unsigned long dst, int len);
+extern void ptrace_disable(struct task_struct *);
+extern int ptrace_check_attach(struct task_struct *task, bool ignore_state);
+extern int ptrace_request(struct task_struct *child, long request,
+			  unsigned long addr, unsigned long data);
+extern void ptrace_notify(int exit_code);
+extern void __ptrace_link(struct task_struct *child,
+			  struct task_struct *new_parent);
+extern void __ptrace_unlink(struct task_struct *child);
+extern void exit_ptrace(struct task_struct *tracer);
+#define PTRACE_MODE_READ	0x01
+#define PTRACE_MODE_ATTACH	0x02
+#define PTRACE_MODE_NOAUDIT	0x04
+/* Returns 0 on success, -errno on denial. */
+extern int __ptrace_may_access(struct task_struct *task, unsigned int mode);
+/* Returns true on success, false on denial. */
+extern bool ptrace_may_access(struct task_struct *task, unsigned int mode);
+
+static inline int ptrace_reparented(struct task_struct *child)
+{
+	return !same_thread_group(child->real_parent, child->parent);
+}
+
+static inline void ptrace_unlink(struct task_struct *child)
+{
+	if (unlikely(child->ptrace))
+		__ptrace_unlink(child);
+}
+
+int generic_ptrace_peekdata(struct task_struct *tsk, unsigned long addr,
+			    unsigned long data);
+int generic_ptrace_pokedata(struct task_struct *tsk, unsigned long addr,
+			    unsigned long data);
+
+/**
+ * ptrace_parent - return the task that is tracing the given task
+ * @task: task to consider
+ *
+ * Returns %NULL if no one is tracing @task, or the &struct task_struct
+ * pointer to its tracer.
+ *
+ * Must called under rcu_read_lock().  The pointer returned might be kept
+ * live only by RCU.  During exec, this may be called with task_lock() held
+ * on @task, still held from when check_unsafe_exec() was called.
+ */
+static inline struct task_struct *ptrace_parent(struct task_struct *task)
+{
+	if (unlikely(task->ptrace))
+		return rcu_dereference(task->parent);
+	return NULL;
+}
+
+/**
+ * ptrace_event_enabled - test whether a ptrace event is enabled
+ * @task: ptracee of interest
+ * @event: %PTRACE_EVENT_* to test
+ *
+ * Test whether @event is enabled for ptracee @task.
+ *
+ * Returns %true if @event is enabled, %false otherwise.
+ */
+static inline bool ptrace_event_enabled(struct task_struct *task, int event)
+{
+	return task->ptrace & PT_EVENT_FLAG(event);
+}
+
+/**
+ * ptrace_event - possibly stop for a ptrace event notification
+ * @event:	%PTRACE_EVENT_* value to report
+ * @message:	value for %PTRACE_GETEVENTMSG to return
+ *
+ * Check whether @event is enabled and, if so, report @event and @message
+ * to the ptrace parent.
+ *
+ * Called without locks.
+ */
+static inline void ptrace_event(int event, unsigned long message)
+{
+	if (unlikely(ptrace_event_enabled(current, event))) {
+		current->ptrace_message = message;
+		ptrace_notify((event << 8) | SIGTRAP);
+	} else if (event == PTRACE_EVENT_EXEC) {
+		/* legacy EXEC report via SIGTRAP */
+		if ((current->ptrace & (PT_PTRACED|PT_SEIZED)) == PT_PTRACED)
+			send_sig(SIGTRAP, current, 0);
+	}
+}
+
+/**
+ * ptrace_init_task - initialize ptrace state for a new child
+ * @child:		new child task
+ * @ptrace:		true if child should be ptrace'd by parent's tracer
+ *
+ * This is called immediately after adding @child to its parent's children
+ * list.  @ptrace is false in the normal case, and true to ptrace @child.
+ *
+ * Called with current's siglock and write_lock_irq(&tasklist_lock) held.
+ */
+static inline void ptrace_init_task(struct task_struct *child, bool ptrace)
+{
+	INIT_LIST_HEAD(&child->ptrace_entry);
+	INIT_LIST_HEAD(&child->ptraced);
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	atomic_set(&child->ptrace_bp_refcnt, 1);
+#endif
+	child->jobctl = 0;
+	child->ptrace = 0;
+	child->parent = child->real_parent;
+
+	if (unlikely(ptrace) && current->ptrace) {
+		child->ptrace = current->ptrace;
+		__ptrace_link(child, current->parent);
+
+		if (child->ptrace & PT_SEIZED)
+			task_set_jobctl_pending(child, JOBCTL_TRAP_STOP);
+		else
+			sigaddset(&child->pending.signal, SIGSTOP);
+
+		set_tsk_thread_flag(child, TIF_SIGPENDING);
+	}
+}
+
+/**
+ * ptrace_release_task - final ptrace-related cleanup of a zombie being reaped
+ * @task:	task in %EXIT_DEAD state
+ *
+ * Called with write_lock(&tasklist_lock) held.
+ */
+static inline void ptrace_release_task(struct task_struct *task)
+{
+	BUG_ON(!list_empty(&task->ptraced));
+	ptrace_unlink(task);
+	BUG_ON(!list_empty(&task->ptrace_entry));
+}
+
+#ifndef force_successful_syscall_return
+/*
+ * System call handlers that, upon successful completion, need to return a
+ * negative value should call force_successful_syscall_return() right before
+ * returning.  On architectures where the syscall convention provides for a
+ * separate error flag (e.g., alpha, ia64, ppc{,64}, sparc{,64}, possibly
+ * others), this macro can be used to ensure that the error flag will not get
+ * set.  On architectures which do not support a separate error flag, the macro
+ * is a no-op and the spurious error condition needs to be filtered out by some
+ * other means (e.g., in user-level, by passing an extra argument to the
+ * syscall handler, or something along those lines).
+ */
+#define force_successful_syscall_return() do { } while (0)
+#endif
+
+#ifndef is_syscall_success
+/*
+ * On most systems we can tell if a syscall is a success based on if the retval
+ * is an error value.  On some systems like ia64 and powerpc they have different
+ * indicators of success/failure and must define their own.
+ */
+#define is_syscall_success(regs) (!IS_ERR_VALUE((unsigned long)(regs_return_value(regs))))
+#endif
+
+/*
+ * <asm/ptrace.h> should define the following things inside #ifdef __KERNEL__.
+ *
+ * These do-nothing inlines are used when the arch does not
+ * implement single-step.  The kerneldoc comments are here
+ * to document the interface for all arch definitions.
+ */
+
+#ifndef arch_has_single_step
+/**
+ * arch_has_single_step - does this CPU support user-mode single-step?
+ *
+ * If this is defined, then there must be function declarations or
+ * inlines for user_enable_single_step() and user_disable_single_step().
+ * arch_has_single_step() should evaluate to nonzero iff the machine
+ * supports instruction single-step for user mode.
+ * It can be a constant or it can test a CPU feature bit.
+ */
+#define arch_has_single_step()		(0)
+
+/**
+ * user_enable_single_step - single-step in user-mode task
+ * @task: either current or a task stopped in %TASK_TRACED
+ *
+ * This can only be called when arch_has_single_step() has returned nonzero.
+ * Set @task so that when it returns to user mode, it will trap after the
+ * next single instruction executes.  If arch_has_block_step() is defined,
+ * this must clear the effects of user_enable_block_step() too.
+ */
+static inline void user_enable_single_step(struct task_struct *task)
+{
+	BUG();			/* This can never be called.  */
+}
+
+/**
+ * user_disable_single_step - cancel user-mode single-step
+ * @task: either current or a task stopped in %TASK_TRACED
+ *
+ * Clear @task of the effects of user_enable_single_step() and
+ * user_enable_block_step().  This can be called whether or not either
+ * of those was ever called on @task, and even if arch_has_single_step()
+ * returned zero.
+ */
+static inline void user_disable_single_step(struct task_struct *task)
+{
+}
+#else
+extern void user_enable_single_step(struct task_struct *);
+extern void user_disable_single_step(struct task_struct *);
+#endif	/* arch_has_single_step */
+
+#ifndef arch_has_block_step
+/**
+ * arch_has_block_step - does this CPU support user-mode block-step?
+ *
+ * If this is defined, then there must be a function declaration or inline
+ * for user_enable_block_step(), and arch_has_single_step() must be defined
+ * too.  arch_has_block_step() should evaluate to nonzero iff the machine
+ * supports step-until-branch for user mode.  It can be a constant or it
+ * can test a CPU feature bit.
+ */
+#define arch_has_block_step()		(0)
+
+/**
+ * user_enable_block_step - step until branch in user-mode task
+ * @task: either current or a task stopped in %TASK_TRACED
+ *
+ * This can only be called when arch_has_block_step() has returned nonzero,
+ * and will never be called when single-instruction stepping is being used.
+ * Set @task so that when it returns to user mode, it will trap after the
+ * next branch or trap taken.
+ */
+static inline void user_enable_block_step(struct task_struct *task)
+{
+	BUG();			/* This can never be called.  */
+}
+#else
+extern void user_enable_block_step(struct task_struct *);
+#endif	/* arch_has_block_step */
+
+#ifdef ARCH_HAS_USER_SINGLE_STEP_INFO
+extern void user_single_step_siginfo(struct task_struct *tsk,
+				struct pt_regs *regs, siginfo_t *info);
+#else
+static inline void user_single_step_siginfo(struct task_struct *tsk,
+				struct pt_regs *regs, siginfo_t *info)
+{
+	memset(info, 0, sizeof(*info));
+	info->si_signo = SIGTRAP;
+}
+#endif
+
+#ifndef arch_ptrace_stop_needed
+/**
+ * arch_ptrace_stop_needed - Decide whether arch_ptrace_stop() should be called
+ * @code:	current->exit_code value ptrace will stop with
+ * @info:	siginfo_t pointer (or %NULL) for signal ptrace will stop with
+ *
+ * This is called with the siglock held, to decide whether or not it's
+ * necessary to release the siglock and call arch_ptrace_stop() with the
+ * same @code and @info arguments.  It can be defined to a constant if
+ * arch_ptrace_stop() is never required, or always is.  On machines where
+ * this makes sense, it should be defined to a quick test to optimize out
+ * calling arch_ptrace_stop() when it would be superfluous.  For example,
+ * if the thread has not been back to user mode since the last stop, the
+ * thread state might indicate that nothing needs to be done.
+ */
+#define arch_ptrace_stop_needed(code, info)	(0)
+#endif
+
+#ifndef arch_ptrace_stop
+/**
+ * arch_ptrace_stop - Do machine-specific work before stopping for ptrace
+ * @code:	current->exit_code value ptrace will stop with
+ * @info:	siginfo_t pointer (or %NULL) for signal ptrace will stop with
+ *
+ * This is called with no locks held when arch_ptrace_stop_needed() has
+ * just returned nonzero.  It is allowed to block, e.g. for user memory
+ * access.  The arch can have machine-specific work to be done before
+ * ptrace stops.  On ia64, register backing store gets written back to user
+ * memory here.  Since this can be costly (requires dropping the siglock),
+ * we only do it when the arch requires it for this particular stop, as
+ * indicated by arch_ptrace_stop_needed().
+ */
+#define arch_ptrace_stop(code, info)		do { } while (0)
+#endif
+
+extern int task_current_syscall(struct task_struct *target, long *callno,
+				unsigned long args[6], unsigned int maxargs,
+				unsigned long *sp, unsigned long *pc);
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+extern int ptrace_get_breakpoints(struct task_struct *tsk);
+extern void ptrace_put_breakpoints(struct task_struct *tsk);
+#else
+static inline void ptrace_put_breakpoints(struct task_struct *tsk) { }
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+
+#endif /* __KERNEL */
+
+#endif
diff --git a/include/linux/pwm.h b/include/linux/pwm.h
new file mode 100644
index 00000000..7c775751
--- /dev/null
+++ b/include/linux/pwm.h
@@ -0,0 +1,31 @@
+#ifndef __LINUX_PWM_H
+#define __LINUX_PWM_H
+
+struct pwm_device;
+
+/*
+ * pwm_request - request a PWM device
+ */
+struct pwm_device *pwm_request(int pwm_id, const char *label);
+
+/*
+ * pwm_free - free a PWM device
+ */
+void pwm_free(struct pwm_device *pwm);
+
+/*
+ * pwm_config - change a PWM device configuration
+ */
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns);
+
+/*
+ * pwm_enable - start a PWM output toggling
+ */
+int pwm_enable(struct pwm_device *pwm);
+
+/*
+ * pwm_disable - stop a PWM output toggling
+ */
+void pwm_disable(struct pwm_device *pwm);
+
+#endif /* __LINUX_PWM_H */
diff --git a/include/linux/pwm_backlight.h b/include/linux/pwm_backlight.h
new file mode 100644
index 00000000..412b70c7
--- /dev/null
+++ b/include/linux/pwm_backlight.h
@@ -0,0 +1,24 @@
+/*
+ * Generic PWM backlight driver data - see drivers/video/backlight/pwm_bl.c
+ */
+#ifndef __LINUX_PWM_BACKLIGHT_H
+#define __LINUX_PWM_BACKLIGHT_H
+
+#include <linux/backlight.h>
+
+struct platform_pwm_backlight_data {
+	int pwm_id;
+	int invert;
+	unsigned int max_brightness;
+	unsigned int dft_brightness;
+	unsigned int lth_brightness;
+	unsigned int hth_brightness;
+	unsigned int pwm_period_ns;
+	int (*init)(struct device *dev);
+	int (*notify)(struct device *dev, int brightness);
+	void (*notify_after)(struct device *dev, int brightness);
+	void (*exit)(struct device *dev);
+	int (*check_fb)(struct device *dev, struct fb_info *info);
+};
+
+#endif
diff --git a/include/linux/pxa168_eth.h b/include/linux/pxa168_eth.h
new file mode 100644
index 00000000..18d75e79
--- /dev/null
+++ b/include/linux/pxa168_eth.h
@@ -0,0 +1,30 @@
+/*
+ *pxa168 ethernet platform device data definition file.
+ */
+#ifndef __LINUX_PXA168_ETH_H
+#define __LINUX_PXA168_ETH_H
+
+struct pxa168_eth_platform_data {
+	int	port_number;
+	int	phy_addr;
+
+	/*
+	 * If speed is 0, then speed and duplex are autonegotiated.
+	 */
+	int	speed;		/* 0, SPEED_10, SPEED_100 */
+	int	duplex;		/* DUPLEX_HALF or DUPLEX_FULL */
+
+	/*
+	 * Override default RX/TX queue sizes if nonzero.
+	 */
+	int	rx_queue_size;
+	int	tx_queue_size;
+
+	/*
+	 * init callback is used for board specific initialization
+	 * e.g on Aspenite its used to initialize the PHY transceiver.
+	 */
+	int (*init)(void);
+};
+
+#endif /* __LINUX_PXA168_ETH_H */
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
new file mode 100644
index 00000000..44835fb3
--- /dev/null
+++ b/include/linux/pxa2xx_ssp.h
@@ -0,0 +1,209 @@
+/*
+ *  pxa2xx_ssp.h
+ *
+ *  Copyright (C) 2003 Russell King, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This driver supports the following PXA CPU/SSP ports:-
+ *
+ *       PXA250     SSP
+ *       PXA255     SSP, NSSP
+ *       PXA26x     SSP, NSSP, ASSP
+ *       PXA27x     SSP1, SSP2, SSP3
+ *       PXA3xx     SSP1, SSP2, SSP3, SSP4
+ */
+
+#ifndef __LINUX_SSP_H
+#define __LINUX_SSP_H
+
+#include <linux/list.h>
+#include <linux/io.h>
+
+/*
+ * SSP Serial Port Registers
+ * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different.
+ * PXA255, PXA26x and PXA27x have extra ports, registers and bits.
+ */
+
+#define SSCR0		(0x00)  /* SSP Control Register 0 */
+#define SSCR1		(0x04)  /* SSP Control Register 1 */
+#define SSSR		(0x08)  /* SSP Status Register */
+#define SSITR		(0x0C)  /* SSP Interrupt Test Register */
+#define SSDR		(0x10)  /* SSP Data Write/Data Read Register */
+
+#define SSTO		(0x28)  /* SSP Time Out Register */
+#define SSPSP		(0x2C)  /* SSP Programmable Serial Protocol */
+#define SSTSA		(0x30)  /* SSP Tx Timeslot Active */
+#define SSRSA		(0x34)  /* SSP Rx Timeslot Active */
+#define SSTSS		(0x38)  /* SSP Timeslot Status */
+#define SSACD		(0x3C)  /* SSP Audio Clock Divider */
+#define SSACDD		(0x40)	/* SSP Audio Clock Dither Divider */
+
+/* Common PXA2xx bits first */
+#define SSCR0_DSS	(0x0000000f)	/* Data Size Select (mask) */
+#define SSCR0_DataSize(x)  ((x) - 1)	/* Data Size Select [4..16] */
+#define SSCR0_FRF	(0x00000030)	/* FRame Format (mask) */
+#define SSCR0_Motorola	(0x0 << 4)	/* Motorola's Serial Peripheral Interface (SPI) */
+#define SSCR0_TI	(0x1 << 4)	/* Texas Instruments' Synchronous Serial Protocol (SSP) */
+#define SSCR0_National	(0x2 << 4)	/* National Microwire */
+#define SSCR0_ECS	(1 << 6)	/* External clock select */
+#define SSCR0_SSE	(1 << 7)	/* Synchronous Serial Port Enable */
+#define SSCR0_SCR(x)	((x) << 8)	/* Serial Clock Rate (mask) */
+
+/* PXA27x, PXA3xx */
+#define SSCR0_EDSS	(1 << 20)	/* Extended data size select */
+#define SSCR0_NCS	(1 << 21)	/* Network clock select */
+#define SSCR0_RIM	(1 << 22)	/* Receive FIFO overrrun interrupt mask */
+#define SSCR0_TUM	(1 << 23)	/* Transmit FIFO underrun interrupt mask */
+#define SSCR0_FRDC	(0x07000000)	/* Frame rate divider control (mask) */
+#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24)	/* Time slots per frame [1..8] */
+#define SSCR0_FPCKE	(1 << 29)	/* FIFO packing enable */
+#define SSCR0_ACS	(1 << 30)	/* Audio clock select */
+#define SSCR0_MOD	(1 << 31)	/* Mode (normal or network) */
+
+
+#define SSCR1_RIE	(1 << 0)	/* Receive FIFO Interrupt Enable */
+#define SSCR1_TIE	(1 << 1)	/* Transmit FIFO Interrupt Enable */
+#define SSCR1_LBM	(1 << 2)	/* Loop-Back Mode */
+#define SSCR1_SPO	(1 << 3)	/* Motorola SPI SSPSCLK polarity setting */
+#define SSCR1_SPH	(1 << 4)	/* Motorola SPI SSPSCLK phase setting */
+#define SSCR1_MWDS	(1 << 5)	/* Microwire Transmit Data Size */
+
+#define SSSR_ALT_FRM_MASK	3	/* Masks the SFRM signal number */
+#define SSSR_TNF	(1 << 2)	/* Transmit FIFO Not Full */
+#define SSSR_RNE	(1 << 3)	/* Receive FIFO Not Empty */
+#define SSSR_BSY	(1 << 4)	/* SSP Busy */
+#define SSSR_TFS	(1 << 5)	/* Transmit FIFO Service Request */
+#define SSSR_RFS	(1 << 6)	/* Receive FIFO Service Request */
+#define SSSR_ROR	(1 << 7)	/* Receive FIFO Overrun */
+
+#ifdef CONFIG_ARCH_PXA
+#define RX_THRESH_DFLT	8
+#define TX_THRESH_DFLT	8
+
+#define SSSR_TFL_MASK	(0xf << 8)	/* Transmit FIFO Level mask */
+#define SSSR_RFL_MASK	(0xf << 12)	/* Receive FIFO Level mask */
+
+#define SSCR1_TFT	(0x000003c0)	/* Transmit FIFO Threshold (mask) */
+#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
+#define SSCR1_RFT	(0x00003c00)	/* Receive FIFO Threshold (mask) */
+#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
+
+#else
+
+#define RX_THRESH_DFLT	2
+#define TX_THRESH_DFLT	2
+
+#define SSSR_TFL_MASK	(0x3 << 8)	/* Transmit FIFO Level mask */
+#define SSSR_RFL_MASK	(0x3 << 12)	/* Receive FIFO Level mask */
+
+#define SSCR1_TFT	(0x000000c0)	/* Transmit FIFO Threshold (mask) */
+#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..4] */
+#define SSCR1_RFT	(0x00000c00)	/* Receive FIFO Threshold (mask) */
+#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..4] */
+#endif
+
+/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
+#define SSCR0_TISSP		(1 << 4)	/* TI Sync Serial Protocol */
+#define SSCR0_PSP		(3 << 4)	/* PSP - Programmable Serial Protocol */
+#define SSCR1_TTELP		(1 << 31)	/* TXD Tristate Enable Last Phase */
+#define SSCR1_TTE		(1 << 30)	/* TXD Tristate Enable */
+#define SSCR1_EBCEI		(1 << 29)	/* Enable Bit Count Error interrupt */
+#define SSCR1_SCFR		(1 << 28)	/* Slave Clock free Running */
+#define SSCR1_ECRA		(1 << 27)	/* Enable Clock Request A */
+#define SSCR1_ECRB		(1 << 26)	/* Enable Clock request B */
+#define SSCR1_SCLKDIR		(1 << 25)	/* Serial Bit Rate Clock Direction */
+#define SSCR1_SFRMDIR		(1 << 24)	/* Frame Direction */
+#define SSCR1_RWOT		(1 << 23)	/* Receive Without Transmit */
+#define SSCR1_TRAIL		(1 << 22)	/* Trailing Byte */
+#define SSCR1_TSRE		(1 << 21)	/* Transmit Service Request Enable */
+#define SSCR1_RSRE		(1 << 20)	/* Receive Service Request Enable */
+#define SSCR1_TINTE		(1 << 19)	/* Receiver Time-out Interrupt enable */
+#define SSCR1_PINTE		(1 << 18)	/* Peripheral Trailing Byte Interrupt Enable */
+#define SSCR1_IFS		(1 << 16)	/* Invert Frame Signal */
+#define SSCR1_STRF		(1 << 15)	/* Select FIFO or EFWR */
+#define SSCR1_EFWR		(1 << 14)	/* Enable FIFO Write/Read */
+
+#define SSSR_BCE		(1 << 23)	/* Bit Count Error */
+#define SSSR_CSS		(1 << 22)	/* Clock Synchronisation Status */
+#define SSSR_TUR		(1 << 21)	/* Transmit FIFO Under Run */
+#define SSSR_EOC		(1 << 20)	/* End Of Chain */
+#define SSSR_TINT		(1 << 19)	/* Receiver Time-out Interrupt */
+#define SSSR_PINT		(1 << 18)	/* Peripheral Trailing Byte Interrupt */
+
+
+#define SSPSP_SCMODE(x)		((x) << 0)	/* Serial Bit Rate Clock Mode */
+#define SSPSP_SFRMP		(1 << 2)	/* Serial Frame Polarity */
+#define SSPSP_ETDS		(1 << 3)	/* End of Transfer data State */
+#define SSPSP_STRTDLY(x)	((x) << 4)	/* Start Delay */
+#define SSPSP_DMYSTRT(x)	((x) << 7)	/* Dummy Start */
+#define SSPSP_SFRMDLY(x)	((x) << 9)	/* Serial Frame Delay */
+#define SSPSP_SFRMWDTH(x)	((x) << 16)	/* Serial Frame Width */
+#define SSPSP_DMYSTOP(x)	((x) << 23)	/* Dummy Stop */
+#define SSPSP_FSRT		(1 << 25)	/* Frame Sync Relative Timing */
+
+/* PXA3xx */
+#define SSPSP_EDMYSTRT(x)	((x) << 26)     /* Extended Dummy Start */
+#define SSPSP_EDMYSTOP(x)	((x) << 28)     /* Extended Dummy Stop */
+#define SSPSP_TIMING_MASK	(0x7f8001f0)
+
+#define SSACD_SCDB		(1 << 3)	/* SSPSYSCLK Divider Bypass */
+#define SSACD_ACPS(x)		((x) << 4)	/* Audio clock PLL select */
+#define SSACD_ACDS(x)		((x) << 0)	/* Audio clock divider select */
+#define SSACD_SCDX8		(1 << 7)	/* SYSCLK division ratio select */
+
+enum pxa_ssp_type {
+	SSP_UNDEFINED = 0,
+	PXA25x_SSP,  /* pxa 210, 250, 255, 26x */
+	PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
+	PXA27x_SSP,
+	PXA168_SSP,
+	CE4100_SSP,
+};
+
+struct ssp_device {
+	struct platform_device *pdev;
+	struct list_head	node;
+
+	struct clk	*clk;
+	void __iomem	*mmio_base;
+	unsigned long	phys_base;
+
+	const char	*label;
+	int		port_id;
+	int		type;
+	int		use_count;
+	int		irq;
+	int		drcmr_rx;
+	int		drcmr_tx;
+};
+
+/**
+ * pxa_ssp_write_reg - Write to a SSP register
+ *
+ * @dev: SSP device to access
+ * @reg: Register to write to
+ * @val: Value to be written.
+ */
+static inline void pxa_ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val)
+{
+	__raw_writel(val, dev->mmio_base + reg);
+}
+
+/**
+ * pxa_ssp_read_reg - Read from a SSP register
+ *
+ * @dev: SSP device to access
+ * @reg: Register to read from
+ */
+static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg)
+{
+	return __raw_readl(dev->mmio_base + reg);
+}
+
+struct ssp_device *pxa_ssp_request(int port, const char *label);
+void pxa_ssp_free(struct ssp_device *);
+#endif
diff --git a/include/linux/qnx4_fs.h b/include/linux/qnx4_fs.h
new file mode 100644
index 00000000..8b9aee1a
--- /dev/null
+++ b/include/linux/qnx4_fs.h
@@ -0,0 +1,88 @@
+/*
+ *  Name                         : qnx4_fs.h
+ *  Author                       : Richard Frowijn
+ *  Function                     : qnx4 global filesystem definitions
+ *  History                      : 23-03-1998 created
+ */
+#ifndef _LINUX_QNX4_FS_H
+#define _LINUX_QNX4_FS_H
+
+#include <linux/types.h>
+#include <linux/qnxtypes.h>
+#include <linux/magic.h>
+
+#define QNX4_ROOT_INO 1
+
+#define QNX4_MAX_XTNTS_PER_XBLK	60
+/* for di_status */
+#define QNX4_FILE_USED          0x01
+#define QNX4_FILE_MODIFIED      0x02
+#define QNX4_FILE_BUSY          0x04
+#define QNX4_FILE_LINK          0x08
+#define QNX4_FILE_INODE         0x10
+#define QNX4_FILE_FSYSCLEAN     0x20
+
+#define QNX4_I_MAP_SLOTS	8
+#define QNX4_Z_MAP_SLOTS	64
+#define QNX4_VALID_FS		0x0001	/* Clean fs. */
+#define QNX4_ERROR_FS		0x0002	/* fs has errors. */
+#define QNX4_BLOCK_SIZE         0x200	/* blocksize of 512 bytes */
+#define QNX4_BLOCK_SIZE_BITS    9	/* blocksize shift */
+#define QNX4_DIR_ENTRY_SIZE     0x040	/* dir entry size of 64 bytes */
+#define QNX4_DIR_ENTRY_SIZE_BITS 6	/* dir entry size shift */
+#define QNX4_XBLK_ENTRY_SIZE    0x200	/* xblk entry size */
+#define QNX4_INODES_PER_BLOCK   0x08	/* 512 / 64 */
+
+/* for filenames */
+#define QNX4_SHORT_NAME_MAX	16
+#define QNX4_NAME_MAX		48
+
+/*
+ * This is the original qnx4 inode layout on disk.
+ */
+struct qnx4_inode_entry {
+	char		di_fname[QNX4_SHORT_NAME_MAX];
+	qnx4_off_t	di_size;
+	qnx4_xtnt_t	di_first_xtnt;
+	__le32		di_xblk;
+	__le32		di_ftime;
+	__le32		di_mtime;
+	__le32		di_atime;
+	__le32		di_ctime;
+	qnx4_nxtnt_t	di_num_xtnts;
+	qnx4_mode_t	di_mode;
+	qnx4_muid_t	di_uid;
+	qnx4_mgid_t	di_gid;
+	qnx4_nlink_t	di_nlink;
+	__u8		di_zero[4];
+	qnx4_ftype_t	di_type;
+	__u8		di_status;
+};
+
+struct qnx4_link_info {
+	char		dl_fname[QNX4_NAME_MAX];
+	__le32		dl_inode_blk;
+	__u8		dl_inode_ndx;
+	__u8		dl_spare[10];
+	__u8		dl_status;
+};
+
+struct qnx4_xblk {
+	__le32		xblk_next_xblk;
+	__le32		xblk_prev_xblk;
+	__u8		xblk_num_xtnts;
+	__u8		xblk_spare[3];
+	__le32		xblk_num_blocks;
+	qnx4_xtnt_t	xblk_xtnts[QNX4_MAX_XTNTS_PER_XBLK];
+	char		xblk_signature[8];
+	qnx4_xtnt_t	xblk_first_xtnt;
+};
+
+struct qnx4_super_block {
+	struct qnx4_inode_entry RootDir;
+	struct qnx4_inode_entry Inode;
+	struct qnx4_inode_entry Boot;
+	struct qnx4_inode_entry AltBoot;
+};
+
+#endif
diff --git a/include/linux/qnx6_fs.h b/include/linux/qnx6_fs.h
new file mode 100644
index 00000000..26049eab
--- /dev/null
+++ b/include/linux/qnx6_fs.h
@@ -0,0 +1,134 @@
+/*
+ *  Name                 : qnx6_fs.h
+ *  Author               : Kai Bankett
+ *  Function             : qnx6 global filesystem definitions
+ *  History              : 17-01-2012 created
+ */
+#ifndef _LINUX_QNX6_FS_H
+#define _LINUX_QNX6_FS_H
+
+#include <linux/types.h>
+#include <linux/magic.h>
+
+#define QNX6_ROOT_INO 1
+
+/* for di_status */
+#define QNX6_FILE_DIRECTORY	0x01
+#define QNX6_FILE_DELETED	0x02
+#define QNX6_FILE_NORMAL	0x03
+
+#define QNX6_SUPERBLOCK_SIZE	0x200	/* superblock always is 512 bytes */
+#define QNX6_SUPERBLOCK_AREA	0x1000	/* area reserved for superblock */
+#define	QNX6_BOOTBLOCK_SIZE	0x2000	/* heading bootblock area */
+#define QNX6_DIR_ENTRY_SIZE	0x20	/* dir entry size of 32 bytes */
+#define QNX6_INODE_SIZE		0x80	/* each inode is 128 bytes */
+#define QNX6_INODE_SIZE_BITS	7	/* inode entry size shift */
+
+#define QNX6_NO_DIRECT_POINTERS	16	/* 16 blockptrs in sbl/inode */
+#define QNX6_PTR_MAX_LEVELS	5	/* maximum indirect levels */
+
+/* for filenames */
+#define QNX6_SHORT_NAME_MAX	27
+#define QNX6_LONG_NAME_MAX	510
+
+/* list of mount options */
+#define QNX6_MOUNT_MMI_FS	0x010000 /* mount as Audi MMI 3G fs */
+
+/*
+ * This is the original qnx6 inode layout on disk.
+ * Each inode is 128 byte long.
+ */
+struct qnx6_inode_entry {
+	__fs64		di_size;
+	__fs32		di_uid;
+	__fs32		di_gid;
+	__fs32		di_ftime;
+	__fs32		di_mtime;
+	__fs32		di_atime;
+	__fs32		di_ctime;
+	__fs16		di_mode;
+	__fs16		di_ext_mode;
+	__fs32		di_block_ptr[QNX6_NO_DIRECT_POINTERS];
+	__u8		di_filelevels;
+	__u8		di_status;
+	__u8		di_unknown2[2];
+	__fs32		di_zero2[6];
+};
+
+/*
+ * Each directory entry is maximum 32 bytes long.
+ * If more characters or special characters required it is stored
+ * in the longfilenames structure.
+ */
+struct qnx6_dir_entry {
+	__fs32		de_inode;
+	__u8		de_size;
+	char		de_fname[QNX6_SHORT_NAME_MAX];
+};
+
+/*
+ * Longfilename direntries have a different structure
+ */
+struct qnx6_long_dir_entry {
+	__fs32		de_inode;
+	__u8		de_size;
+	__u8		de_unknown[3];
+	__fs32		de_long_inode;
+	__fs32		de_checksum;
+};
+
+struct qnx6_long_filename {
+	__fs16		lf_size;
+	__u8		lf_fname[QNX6_LONG_NAME_MAX];
+};
+
+struct qnx6_root_node {
+	__fs64		size;
+	__fs32		ptr[QNX6_NO_DIRECT_POINTERS];
+	__u8		levels;
+	__u8		mode;
+	__u8		spare[6];
+};
+
+struct qnx6_super_block {
+	__fs32		sb_magic;
+	__fs32		sb_checksum;
+	__fs64		sb_serial;
+	__fs32		sb_ctime;	/* time the fs was created */
+	__fs32		sb_atime;	/* last access time */
+	__fs32		sb_flags;
+	__fs16		sb_version1;	/* filesystem version information */
+	__fs16		sb_version2;	/* filesystem version information */
+	__u8		sb_volumeid[16];
+	__fs32		sb_blocksize;
+	__fs32		sb_num_inodes;
+	__fs32		sb_free_inodes;
+	__fs32		sb_num_blocks;
+	__fs32		sb_free_blocks;
+	__fs32		sb_allocgroup;
+	struct qnx6_root_node Inode;
+	struct qnx6_root_node Bitmap;
+	struct qnx6_root_node Longfile;
+	struct qnx6_root_node Unknown;
+};
+
+/* Audi MMI 3G superblock layout is different to plain qnx6 */
+struct qnx6_mmi_super_block {
+	__fs32		sb_magic;
+	__fs32		sb_checksum;
+	__fs64		sb_serial;
+	__u8		sb_spare0[12];
+	__u8		sb_id[12];
+	__fs32		sb_blocksize;
+	__fs32		sb_num_inodes;
+	__fs32		sb_free_inodes;
+	__fs32		sb_num_blocks;
+	__fs32		sb_free_blocks;
+	__u8		sb_spare1[4];
+	struct qnx6_root_node Inode;
+	struct qnx6_root_node Bitmap;
+	struct qnx6_root_node Longfile;
+	struct qnx6_root_node Unknown;
+};
+
+#endif
diff --git a/include/linux/qnxtypes.h b/include/linux/qnxtypes.h
new file mode 100644
index 00000000..bebbe5cc
--- /dev/null
+++ b/include/linux/qnxtypes.h
@@ -0,0 +1,28 @@
+/*
+ *  Name                         : qnxtypes.h
+ *  Author                       : Richard Frowijn
+ *  Function                     : standard qnx types
+ *  History                      : 22-03-1998 created
+ *
+ */
+
+#ifndef _QNX4TYPES_H
+#define _QNX4TYPES_H
+
+#include <linux/types.h>
+
+typedef __le16 qnx4_nxtnt_t;
+typedef __u8  qnx4_ftype_t;
+
+typedef struct {
+	__le32 xtnt_blk;
+	__le32 xtnt_size;
+} qnx4_xtnt_t;
+
+typedef __le16 qnx4_mode_t;
+typedef __le16 qnx4_muid_t;
+typedef __le16 qnx4_mgid_t;
+typedef __le32 qnx4_off_t;
+typedef __le16 qnx4_nlink_t;
+
+#endif
diff --git a/include/linux/quicklist.h b/include/linux/quicklist.h
new file mode 100644
index 00000000..bd466439
--- /dev/null
+++ b/include/linux/quicklist.h
@@ -0,0 +1,93 @@
+#ifndef LINUX_QUICKLIST_H
+#define LINUX_QUICKLIST_H
+/*
+ * Fast allocations and disposal of pages. Pages must be in the condition
+ * as needed after allocation when they are freed. Per cpu lists of pages
+ * are kept that only contain node local pages.
+ *
+ * (C) 2007, SGI. Christoph Lameter <clameter@sgi.com>
+ */
+#include <linux/kernel.h>
+#include <linux/gfp.h>
+#include <linux/percpu.h>
+
+#ifdef CONFIG_QUICKLIST
+
+struct quicklist {
+	void *page;
+	int nr_pages;
+};
+
+DECLARE_PER_CPU(struct quicklist, quicklist)[CONFIG_NR_QUICK];
+
+/*
+ * The two key functions quicklist_alloc and quicklist_free are inline so
+ * that they may be custom compiled for the platform.
+ * Specifying a NULL ctor can remove constructor support. Specifying
+ * a constant quicklist allows the determination of the exact address
+ * in the per cpu area.
+ *
+ * The fast patch in quicklist_alloc touched only a per cpu cacheline and
+ * the first cacheline of the page itself. There is minmal overhead involved.
+ */
+static inline void *quicklist_alloc(int nr, gfp_t flags, void (*ctor)(void *))
+{
+	struct quicklist *q;
+	void **p = NULL;
+
+	q =&get_cpu_var(quicklist)[nr];
+	p = q->page;
+	if (likely(p)) {
+		q->page = p[0];
+		p[0] = NULL;
+		q->nr_pages--;
+	}
+	put_cpu_var(quicklist);
+	if (likely(p))
+		return p;
+
+	p = (void *)__get_free_page(flags | __GFP_ZERO);
+	if (ctor && p)
+		ctor(p);
+	return p;
+}
+
+static inline void __quicklist_free(int nr, void (*dtor)(void *), void *p,
+	struct page *page)
+{
+	struct quicklist *q;
+
+	q = &get_cpu_var(quicklist)[nr];
+	*(void **)p = q->page;
+	q->page = p;
+	q->nr_pages++;
+	put_cpu_var(quicklist);
+}
+
+static inline void quicklist_free(int nr, void (*dtor)(void *), void *pp)
+{
+	__quicklist_free(nr, dtor, pp, virt_to_page(pp));
+}
+
+static inline void quicklist_free_page(int nr, void (*dtor)(void *),
+							struct page *page)
+{
+	__quicklist_free(nr, dtor, page_address(page), page);
+}
+
+void quicklist_trim(int nr, void (*dtor)(void *),
+	unsigned long min_pages, unsigned long max_free);
+
+unsigned long quicklist_total_size(void);
+
+#else
+
+static inline unsigned long quicklist_total_size(void)
+{
+	return 0;
+}
+
+#endif
+
+#endif /* LINUX_QUICKLIST_H */
+
diff --git a/include/linux/quota.h b/include/linux/quota.h
new file mode 100644
index 00000000..c09fa042
--- /dev/null
+++ b/include/linux/quota.h
@@ -0,0 +1,423 @@
+/*
+ * Copyright (c) 1982, 1986 Regents of the University of California.
+ * All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Robert Elz at The University of Melbourne.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef _LINUX_QUOTA_
+#define _LINUX_QUOTA_
+
+#include <linux/errno.h>
+#include <linux/types.h>
+
+#define __DQUOT_VERSION__	"dquot_6.5.2"
+
+#define MAXQUOTAS 2
+#define USRQUOTA  0		/* element used for user quotas */
+#define GRPQUOTA  1		/* element used for group quotas */
+
+/*
+ * Definitions for the default names of the quotas files.
+ */
+#define INITQFNAMES { \
+	"user",    /* USRQUOTA */ \
+	"group",   /* GRPQUOTA */ \
+	"undefined", \
+};
+
+/*
+ * Command definitions for the 'quotactl' system call.
+ * The commands are broken into a main command defined below
+ * and a subcommand that is used to convey the type of
+ * quota that is being manipulated (see above).
+ */
+#define SUBCMDMASK  0x00ff
+#define SUBCMDSHIFT 8
+#define QCMD(cmd, type)  (((cmd) << SUBCMDSHIFT) | ((type) & SUBCMDMASK))
+
+#define Q_SYNC     0x800001	/* sync disk copy of a filesystems quotas */
+#define Q_QUOTAON  0x800002	/* turn quotas on */
+#define Q_QUOTAOFF 0x800003	/* turn quotas off */
+#define Q_GETFMT   0x800004	/* get quota format used on given filesystem */
+#define Q_GETINFO  0x800005	/* get information about quota files */
+#define Q_SETINFO  0x800006	/* set information about quota files */
+#define Q_GETQUOTA 0x800007	/* get user quota structure */
+#define Q_SETQUOTA 0x800008	/* set user quota structure */
+
+/* Quota format type IDs */
+#define	QFMT_VFS_OLD 1
+#define	QFMT_VFS_V0 2
+#define QFMT_OCFS2 3
+#define	QFMT_VFS_V1 4
+
+/* Size of block in which space limits are passed through the quota
+ * interface */
+#define QIF_DQBLKSIZE_BITS 10
+#define QIF_DQBLKSIZE (1 << QIF_DQBLKSIZE_BITS)
+
+/*
+ * Quota structure used for communication with userspace via quotactl
+ * Following flags are used to specify which fields are valid
+ */
+enum {
+	QIF_BLIMITS_B = 0,
+	QIF_SPACE_B,
+	QIF_ILIMITS_B,
+	QIF_INODES_B,
+	QIF_BTIME_B,
+	QIF_ITIME_B,
+};
+
+#define QIF_BLIMITS	(1 << QIF_BLIMITS_B)
+#define QIF_SPACE	(1 << QIF_SPACE_B)
+#define QIF_ILIMITS	(1 << QIF_ILIMITS_B)
+#define QIF_INODES	(1 << QIF_INODES_B)
+#define QIF_BTIME	(1 << QIF_BTIME_B)
+#define QIF_ITIME	(1 << QIF_ITIME_B)
+#define QIF_LIMITS	(QIF_BLIMITS | QIF_ILIMITS)
+#define QIF_USAGE	(QIF_SPACE | QIF_INODES)
+#define QIF_TIMES	(QIF_BTIME | QIF_ITIME)
+#define QIF_ALL		(QIF_LIMITS | QIF_USAGE | QIF_TIMES)
+
+struct if_dqblk {
+	__u64 dqb_bhardlimit;
+	__u64 dqb_bsoftlimit;
+	__u64 dqb_curspace;
+	__u64 dqb_ihardlimit;
+	__u64 dqb_isoftlimit;
+	__u64 dqb_curinodes;
+	__u64 dqb_btime;
+	__u64 dqb_itime;
+	__u32 dqb_valid;
+};
+
+/*
+ * Structure used for setting quota information about file via quotactl
+ * Following flags are used to specify which fields are valid
+ */
+#define IIF_BGRACE	1
+#define IIF_IGRACE	2
+#define IIF_FLAGS	4
+#define IIF_ALL		(IIF_BGRACE | IIF_IGRACE | IIF_FLAGS)
+
+struct if_dqinfo {
+	__u64 dqi_bgrace;
+	__u64 dqi_igrace;
+	__u32 dqi_flags;
+	__u32 dqi_valid;
+};
+
+/*
+ * Definitions for quota netlink interface
+ */
+#define QUOTA_NL_NOWARN 0
+#define QUOTA_NL_IHARDWARN 1		/* Inode hardlimit reached */
+#define QUOTA_NL_ISOFTLONGWARN 2 	/* Inode grace time expired */
+#define QUOTA_NL_ISOFTWARN 3		/* Inode softlimit reached */
+#define QUOTA_NL_BHARDWARN 4		/* Block hardlimit reached */
+#define QUOTA_NL_BSOFTLONGWARN 5	/* Block grace time expired */
+#define QUOTA_NL_BSOFTWARN 6		/* Block softlimit reached */
+#define QUOTA_NL_IHARDBELOW 7		/* Usage got below inode hardlimit */
+#define QUOTA_NL_ISOFTBELOW 8		/* Usage got below inode softlimit */
+#define QUOTA_NL_BHARDBELOW 9		/* Usage got below block hardlimit */
+#define QUOTA_NL_BSOFTBELOW 10		/* Usage got below block softlimit */
+
+enum {
+	QUOTA_NL_C_UNSPEC,
+	QUOTA_NL_C_WARNING,
+	__QUOTA_NL_C_MAX,
+};
+#define QUOTA_NL_C_MAX (__QUOTA_NL_C_MAX - 1)
+
+enum {
+	QUOTA_NL_A_UNSPEC,
+	QUOTA_NL_A_QTYPE,
+	QUOTA_NL_A_EXCESS_ID,
+	QUOTA_NL_A_WARNING,
+	QUOTA_NL_A_DEV_MAJOR,
+	QUOTA_NL_A_DEV_MINOR,
+	QUOTA_NL_A_CAUSED_ID,
+	__QUOTA_NL_A_MAX,
+};
+#define QUOTA_NL_A_MAX (__QUOTA_NL_A_MAX - 1)
+
+
+#ifdef __KERNEL__
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/rwsem.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/percpu_counter.h>
+
+#include <linux/dqblk_xfs.h>
+#include <linux/dqblk_v1.h>
+#include <linux/dqblk_v2.h>
+
+#include <linux/atomic.h>
+
+typedef __kernel_uid32_t qid_t; /* Type in which we store ids in memory */
+typedef long long qsize_t;	/* Type in which we store sizes */
+
+extern spinlock_t dq_data_lock;
+
+/* Maximal numbers of writes for quota operation (insert/delete/update)
+ * (over VFS all formats) */
+#define DQUOT_INIT_ALLOC max(V1_INIT_ALLOC, V2_INIT_ALLOC)
+#define DQUOT_INIT_REWRITE max(V1_INIT_REWRITE, V2_INIT_REWRITE)
+#define DQUOT_DEL_ALLOC max(V1_DEL_ALLOC, V2_DEL_ALLOC)
+#define DQUOT_DEL_REWRITE max(V1_DEL_REWRITE, V2_DEL_REWRITE)
+
+/*
+ * Data for one user/group kept in memory
+ */
+struct mem_dqblk {
+	qsize_t dqb_bhardlimit;	/* absolute limit on disk blks alloc */
+	qsize_t dqb_bsoftlimit;	/* preferred limit on disk blks */
+	qsize_t dqb_curspace;	/* current used space */
+	qsize_t dqb_rsvspace;   /* current reserved space for delalloc*/
+	qsize_t dqb_ihardlimit;	/* absolute limit on allocated inodes */
+	qsize_t dqb_isoftlimit;	/* preferred inode limit */
+	qsize_t dqb_curinodes;	/* current # allocated inodes */
+	time_t dqb_btime;	/* time limit for excessive disk use */
+	time_t dqb_itime;	/* time limit for excessive inode use */
+};
+
+/*
+ * Data for one quotafile kept in memory
+ */
+struct quota_format_type;
+
+struct mem_dqinfo {
+	struct quota_format_type *dqi_format;
+	int dqi_fmt_id;		/* Id of the dqi_format - used when turning
+				 * quotas on after remount RW */
+	struct list_head dqi_dirty_list;	/* List of dirty dquots */
+	unsigned long dqi_flags;
+	unsigned int dqi_bgrace;
+	unsigned int dqi_igrace;
+	qsize_t dqi_maxblimit;
+	qsize_t dqi_maxilimit;
+	void *dqi_priv;
+};
+
+struct super_block;
+
+#define DQF_MASK 0xffff		/* Mask for format specific flags */
+#define DQF_GETINFO_MASK 0x1ffff	/* Mask for flags passed to userspace */
+#define DQF_SETINFO_MASK 0xffff		/* Mask for flags modifiable from userspace */
+#define DQF_SYS_FILE_B		16
+#define DQF_SYS_FILE (1 << DQF_SYS_FILE_B)	/* Quota file stored as system file */
+#define DQF_INFO_DIRTY_B	31
+#define DQF_INFO_DIRTY (1 << DQF_INFO_DIRTY_B)	/* Is info dirty? */
+
+extern void mark_info_dirty(struct super_block *sb, int type);
+static inline int info_dirty(struct mem_dqinfo *info)
+{
+	return test_bit(DQF_INFO_DIRTY_B, &info->dqi_flags);
+}
+
+enum {
+	DQST_LOOKUPS,
+	DQST_DROPS,
+	DQST_READS,
+	DQST_WRITES,
+	DQST_CACHE_HITS,
+	DQST_ALLOC_DQUOTS,
+	DQST_FREE_DQUOTS,
+	DQST_SYNCS,
+	_DQST_DQSTAT_LAST
+};
+
+struct dqstats {
+	int stat[_DQST_DQSTAT_LAST];
+	struct percpu_counter counter[_DQST_DQSTAT_LAST];
+};
+
+extern struct dqstats *dqstats_pcpu;
+extern struct dqstats dqstats;
+
+static inline void dqstats_inc(unsigned int type)
+{
+	percpu_counter_inc(&dqstats.counter[type]);
+}
+
+static inline void dqstats_dec(unsigned int type)
+{
+	percpu_counter_dec(&dqstats.counter[type]);
+}
+
+#define DQ_MOD_B	0	/* dquot modified since read */
+#define DQ_BLKS_B	1	/* uid/gid has been warned about blk limit */
+#define DQ_INODES_B	2	/* uid/gid has been warned about inode limit */
+#define DQ_FAKE_B	3	/* no limits only usage */
+#define DQ_READ_B	4	/* dquot was read into memory */
+#define DQ_ACTIVE_B	5	/* dquot is active (dquot_release not called) */
+#define DQ_LASTSET_B	6	/* Following 6 bits (see QIF_) are reserved\
+				 * for the mask of entries set via SETQUOTA\
+				 * quotactl. They are set under dq_data_lock\
+				 * and the quota format handling dquot can\
+				 * clear them when it sees fit. */
+
+struct dquot {
+	struct hlist_node dq_hash;	/* Hash list in memory */
+	struct list_head dq_inuse;	/* List of all quotas */
+	struct list_head dq_free;	/* Free list element */
+	struct list_head dq_dirty;	/* List of dirty dquots */
+	struct mutex dq_lock;		/* dquot IO lock */
+	atomic_t dq_count;		/* Use count */
+	wait_queue_head_t dq_wait_unused;	/* Wait queue for dquot to become unused */
+	struct super_block *dq_sb;	/* superblock this applies to */
+	unsigned int dq_id;		/* ID this applies to (uid, gid) */
+	loff_t dq_off;			/* Offset of dquot on disk */
+	unsigned long dq_flags;		/* See DQ_* */
+	short dq_type;			/* Type of quota */
+	struct mem_dqblk dq_dqb;	/* Diskquota usage */
+};
+
+/* Operations which must be implemented by each quota format */
+struct quota_format_ops {
+	int (*check_quota_file)(struct super_block *sb, int type);	/* Detect whether file is in our format */
+	int (*read_file_info)(struct super_block *sb, int type);	/* Read main info about file - called on quotaon() */
+	int (*write_file_info)(struct super_block *sb, int type);	/* Write main info about file */
+	int (*free_file_info)(struct super_block *sb, int type);	/* Called on quotaoff() */
+	int (*read_dqblk)(struct dquot *dquot);		/* Read structure for one user */
+	int (*commit_dqblk)(struct dquot *dquot);	/* Write structure for one user */
+	int (*release_dqblk)(struct dquot *dquot);	/* Called when last reference to dquot is being dropped */
+};
+
+/* Operations working with dquots */
+struct dquot_operations {
+	int (*write_dquot) (struct dquot *);		/* Ordinary dquot write */
+	struct dquot *(*alloc_dquot)(struct super_block *, int);	/* Allocate memory for new dquot */
+	void (*destroy_dquot)(struct dquot *);		/* Free memory for dquot */
+	int (*acquire_dquot) (struct dquot *);		/* Quota is going to be created on disk */
+	int (*release_dquot) (struct dquot *);		/* Quota is going to be deleted from disk */
+	int (*mark_dirty) (struct dquot *);		/* Dquot is marked dirty */
+	int (*write_info) (struct super_block *, int);	/* Write of quota "superblock" */
+	/* get reserved quota for delayed alloc, value returned is managed by
+	 * quota code only */
+	qsize_t *(*get_reserved_space) (struct inode *);
+};
+
+struct path;
+
+/* Operations handling requests from userspace */
+struct quotactl_ops {
+	int (*quota_on)(struct super_block *, int, int, struct path *);
+	int (*quota_on_meta)(struct super_block *, int, int);
+	int (*quota_off)(struct super_block *, int);
+	int (*quota_sync)(struct super_block *, int, int);
+	int (*get_info)(struct super_block *, int, struct if_dqinfo *);
+	int (*set_info)(struct super_block *, int, struct if_dqinfo *);
+	int (*get_dqblk)(struct super_block *, int, qid_t, struct fs_disk_quota *);
+	int (*set_dqblk)(struct super_block *, int, qid_t, struct fs_disk_quota *);
+	int (*get_xstate)(struct super_block *, struct fs_quota_stat *);
+	int (*set_xstate)(struct super_block *, unsigned int, int);
+};
+
+struct quota_format_type {
+	int qf_fmt_id;	/* Quota format id */
+	const struct quota_format_ops *qf_ops;	/* Operations of format */
+	struct module *qf_owner;		/* Module implementing quota format */
+	struct quota_format_type *qf_next;
+};
+
+/* Quota state flags - they actually come in two flavors - for users and groups */
+enum {
+	_DQUOT_USAGE_ENABLED = 0,		/* Track disk usage for users */
+	_DQUOT_LIMITS_ENABLED,			/* Enforce quota limits for users */
+	_DQUOT_SUSPENDED,			/* User diskquotas are off, but
+						 * we have necessary info in
+						 * memory to turn them on */
+	_DQUOT_STATE_FLAGS
+};
+#define DQUOT_USAGE_ENABLED	(1 << _DQUOT_USAGE_ENABLED)
+#define DQUOT_LIMITS_ENABLED	(1 << _DQUOT_LIMITS_ENABLED)
+#define DQUOT_SUSPENDED		(1 << _DQUOT_SUSPENDED)
+#define DQUOT_STATE_FLAGS	(DQUOT_USAGE_ENABLED | DQUOT_LIMITS_ENABLED | \
+				 DQUOT_SUSPENDED)
+/* Other quota flags */
+#define DQUOT_STATE_LAST	(_DQUOT_STATE_FLAGS * MAXQUOTAS)
+#define DQUOT_QUOTA_SYS_FILE	(1 << DQUOT_STATE_LAST)
+						/* Quota file is a special
+						 * system file and user cannot
+						 * touch it. Filesystem is
+						 * responsible for setting
+						 * S_NOQUOTA, S_NOATIME flags
+						 */
+#define DQUOT_NEGATIVE_USAGE	(1 << (DQUOT_STATE_LAST + 1))
+					       /* Allow negative quota usage */
+
+static inline unsigned int dquot_state_flag(unsigned int flags, int type)
+{
+	return flags << _DQUOT_STATE_FLAGS * type;
+}
+
+static inline unsigned int dquot_generic_flag(unsigned int flags, int type)
+{
+	return (flags >> _DQUOT_STATE_FLAGS * type) & DQUOT_STATE_FLAGS;
+}
+
+#ifdef CONFIG_QUOTA_NETLINK_INTERFACE
+extern void quota_send_warning(short type, unsigned int id, dev_t dev,
+			       const char warntype);
+#else
+static inline void quota_send_warning(short type, unsigned int id, dev_t dev,
+				      const char warntype)
+{
+	return;
+}
+#endif /* CONFIG_QUOTA_NETLINK_INTERFACE */
+
+struct quota_info {
+	unsigned int flags;			/* Flags for diskquotas on this device */
+	struct mutex dqio_mutex;		/* lock device while I/O in progress */
+	struct mutex dqonoff_mutex;		/* Serialize quotaon & quotaoff */
+	struct rw_semaphore dqptr_sem;		/* serialize ops using quota_info struct, pointers from inode to dquots */
+	struct inode *files[MAXQUOTAS];		/* inodes of quotafiles */
+	struct mem_dqinfo info[MAXQUOTAS];	/* Information for each quota type */
+	const struct quota_format_ops *ops[MAXQUOTAS];	/* Operations for each type */
+};
+
+int register_quota_format(struct quota_format_type *fmt);
+void unregister_quota_format(struct quota_format_type *fmt);
+
+struct quota_module_name {
+	int qm_fmt_id;
+	char *qm_mod_name;
+};
+
+#define INIT_QUOTA_MODULE_NAMES {\
+	{QFMT_VFS_OLD, "quota_v1"},\
+	{QFMT_VFS_V0, "quota_v2"},\
+	{0, NULL}}
+
+#endif /* __KERNEL__ */
+#endif /* _QUOTA_ */
diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h
new file mode 100644
index 00000000..d93f95e6
--- /dev/null
+++ b/include/linux/quotaops.h
@@ -0,0 +1,360 @@
+/*
+ * Definitions for diskquota-operations. When diskquota is configured these
+ * macros expand to the right source-code.
+ *
+ * Author:  Marco van Wieringen <mvw@planets.elm.net>
+ */
+#ifndef _LINUX_QUOTAOPS_
+#define _LINUX_QUOTAOPS_
+
+#include <linux/fs.h>
+
+#define DQUOT_SPACE_WARN	0x1
+#define DQUOT_SPACE_RESERVE	0x2
+#define DQUOT_SPACE_NOFAIL	0x4
+
+static inline struct quota_info *sb_dqopt(struct super_block *sb)
+{
+	return &sb->s_dquot;
+}
+
+/* i_mutex must being held */
+static inline bool is_quota_modification(struct inode *inode, struct iattr *ia)
+{
+	return (ia->ia_valid & ATTR_SIZE && ia->ia_size != inode->i_size) ||
+		(ia->ia_valid & ATTR_UID && ia->ia_uid != inode->i_uid) ||
+		(ia->ia_valid & ATTR_GID && ia->ia_gid != inode->i_gid);
+}
+
+#if defined(CONFIG_QUOTA)
+
+#define quota_error(sb, fmt, args...) \
+	__quota_error((sb), __func__, fmt , ## args)
+
+extern __printf(3, 4)
+void __quota_error(struct super_block *sb, const char *func,
+		   const char *fmt, ...);
+
+/*
+ * declaration of quota_function calls in kernel.
+ */
+void inode_add_rsv_space(struct inode *inode, qsize_t number);
+void inode_claim_rsv_space(struct inode *inode, qsize_t number);
+void inode_sub_rsv_space(struct inode *inode, qsize_t number);
+
+void dquot_initialize(struct inode *inode);
+void dquot_drop(struct inode *inode);
+struct dquot *dqget(struct super_block *sb, unsigned int id, int type);
+void dqput(struct dquot *dquot);
+int dquot_scan_active(struct super_block *sb,
+		      int (*fn)(struct dquot *dquot, unsigned long priv),
+		      unsigned long priv);
+struct dquot *dquot_alloc(struct super_block *sb, int type);
+void dquot_destroy(struct dquot *dquot);
+
+int __dquot_alloc_space(struct inode *inode, qsize_t number, int flags);
+void __dquot_free_space(struct inode *inode, qsize_t number, int flags);
+
+int dquot_alloc_inode(const struct inode *inode);
+
+int dquot_claim_space_nodirty(struct inode *inode, qsize_t number);
+void dquot_free_inode(const struct inode *inode);
+
+int dquot_disable(struct super_block *sb, int type, unsigned int flags);
+/* Suspend quotas on remount RO */
+static inline int dquot_suspend(struct super_block *sb, int type)
+{
+	return dquot_disable(sb, type, DQUOT_SUSPENDED);
+}
+int dquot_resume(struct super_block *sb, int type);
+
+int dquot_commit(struct dquot *dquot);
+int dquot_acquire(struct dquot *dquot);
+int dquot_release(struct dquot *dquot);
+int dquot_commit_info(struct super_block *sb, int type);
+int dquot_mark_dquot_dirty(struct dquot *dquot);
+
+int dquot_file_open(struct inode *inode, struct file *file);
+
+int dquot_enable(struct inode *inode, int type, int format_id,
+	unsigned int flags);
+int dquot_quota_on(struct super_block *sb, int type, int format_id,
+ 	struct path *path);
+int dquot_quota_on_mount(struct super_block *sb, char *qf_name,
+ 	int format_id, int type);
+int dquot_quota_off(struct super_block *sb, int type);
+int dquot_quota_sync(struct super_block *sb, int type, int wait);
+int dquot_get_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii);
+int dquot_set_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii);
+int dquot_get_dqblk(struct super_block *sb, int type, qid_t id,
+		struct fs_disk_quota *di);
+int dquot_set_dqblk(struct super_block *sb, int type, qid_t id,
+		struct fs_disk_quota *di);
+
+int __dquot_transfer(struct inode *inode, struct dquot **transfer_to);
+int dquot_transfer(struct inode *inode, struct iattr *iattr);
+
+static inline struct mem_dqinfo *sb_dqinfo(struct super_block *sb, int type)
+{
+	return sb_dqopt(sb)->info + type;
+}
+
+/*
+ * Functions for checking status of quota
+ */
+
+static inline bool sb_has_quota_usage_enabled(struct super_block *sb, int type)
+{
+	return sb_dqopt(sb)->flags &
+				dquot_state_flag(DQUOT_USAGE_ENABLED, type);
+}
+
+static inline bool sb_has_quota_limits_enabled(struct super_block *sb, int type)
+{
+	return sb_dqopt(sb)->flags &
+				dquot_state_flag(DQUOT_LIMITS_ENABLED, type);
+}
+
+static inline bool sb_has_quota_suspended(struct super_block *sb, int type)
+{
+	return sb_dqopt(sb)->flags &
+				dquot_state_flag(DQUOT_SUSPENDED, type);
+}
+
+static inline unsigned sb_any_quota_suspended(struct super_block *sb)
+{
+	unsigned type, tmsk = 0;
+	for (type = 0; type < MAXQUOTAS; type++)
+		tmsk |= sb_has_quota_suspended(sb, type) << type;
+	return tmsk;
+}
+
+/* Does kernel know about any quota information for given sb + type? */
+static inline bool sb_has_quota_loaded(struct super_block *sb, int type)
+{
+	/* Currently if anything is on, then quota usage is on as well */
+	return sb_has_quota_usage_enabled(sb, type);
+}
+
+static inline unsigned sb_any_quota_loaded(struct super_block *sb)
+{
+	unsigned type, tmsk = 0;
+	for (type = 0; type < MAXQUOTAS; type++)
+		tmsk |= sb_has_quota_loaded(sb, type) << type;
+	return	tmsk;
+}
+
+static inline bool sb_has_quota_active(struct super_block *sb, int type)
+{
+	return sb_has_quota_loaded(sb, type) &&
+	       !sb_has_quota_suspended(sb, type);
+}
+
+/*
+ * Operations supported for diskquotas.
+ */
+extern const struct dquot_operations dquot_operations;
+extern const struct quotactl_ops dquot_quotactl_ops;
+
+#else
+
+static inline int sb_has_quota_usage_enabled(struct super_block *sb, int type)
+{
+	return 0;
+}
+
+static inline int sb_has_quota_limits_enabled(struct super_block *sb, int type)
+{
+	return 0;
+}
+
+static inline int sb_has_quota_suspended(struct super_block *sb, int type)
+{
+	return 0;
+}
+
+static inline int sb_any_quota_suspended(struct super_block *sb)
+{
+	return 0;
+}
+
+/* Does kernel know about any quota information for given sb + type? */
+static inline int sb_has_quota_loaded(struct super_block *sb, int type)
+{
+	return 0;
+}
+
+static inline int sb_any_quota_loaded(struct super_block *sb)
+{
+	return 0;
+}
+
+static inline int sb_has_quota_active(struct super_block *sb, int type)
+{
+	return 0;
+}
+
+static inline void dquot_initialize(struct inode *inode)
+{
+}
+
+static inline void dquot_drop(struct inode *inode)
+{
+}
+
+static inline int dquot_alloc_inode(const struct inode *inode)
+{
+	return 0;
+}
+
+static inline void dquot_free_inode(const struct inode *inode)
+{
+}
+
+static inline int dquot_transfer(struct inode *inode, struct iattr *iattr)
+{
+	return 0;
+}
+
+static inline int __dquot_alloc_space(struct inode *inode, qsize_t number,
+		int flags)
+{
+	if (!(flags & DQUOT_SPACE_RESERVE))
+		inode_add_bytes(inode, number);
+	return 0;
+}
+
+static inline void __dquot_free_space(struct inode *inode, qsize_t number,
+		int flags)
+{
+	if (!(flags & DQUOT_SPACE_RESERVE))
+		inode_sub_bytes(inode, number);
+}
+
+static inline int dquot_claim_space_nodirty(struct inode *inode, qsize_t number)
+{
+	inode_add_bytes(inode, number);
+	return 0;
+}
+
+static inline int dquot_disable(struct super_block *sb, int type,
+		unsigned int flags)
+{
+	return 0;
+}
+
+static inline int dquot_suspend(struct super_block *sb, int type)
+{
+	return 0;
+}
+
+static inline int dquot_resume(struct super_block *sb, int type)
+{
+	return 0;
+}
+
+#define dquot_file_open		generic_file_open
+
+#endif /* CONFIG_QUOTA */
+
+static inline int dquot_alloc_space_nodirty(struct inode *inode, qsize_t nr)
+{
+	return __dquot_alloc_space(inode, nr, DQUOT_SPACE_WARN);
+}
+
+static inline void dquot_alloc_space_nofail(struct inode *inode, qsize_t nr)
+{
+	__dquot_alloc_space(inode, nr, DQUOT_SPACE_WARN|DQUOT_SPACE_NOFAIL);
+	mark_inode_dirty_sync(inode);
+}
+
+static inline int dquot_alloc_space(struct inode *inode, qsize_t nr)
+{
+	int ret;
+
+	ret = dquot_alloc_space_nodirty(inode, nr);
+	if (!ret) {
+		/*
+		 * Mark inode fully dirty. Since we are allocating blocks, inode
+		 * would become fully dirty soon anyway and it reportedly
+		 * reduces lock contention.
+		 */
+		mark_inode_dirty(inode);
+	}
+	return ret;
+}
+
+static inline int dquot_alloc_block_nodirty(struct inode *inode, qsize_t nr)
+{
+	return dquot_alloc_space_nodirty(inode, nr << inode->i_blkbits);
+}
+
+static inline void dquot_alloc_block_nofail(struct inode *inode, qsize_t nr)
+{
+	dquot_alloc_space_nofail(inode, nr << inode->i_blkbits);
+}
+
+static inline int dquot_alloc_block(struct inode *inode, qsize_t nr)
+{
+	return dquot_alloc_space(inode, nr << inode->i_blkbits);
+}
+
+static inline int dquot_prealloc_block_nodirty(struct inode *inode, qsize_t nr)
+{
+	return __dquot_alloc_space(inode, nr << inode->i_blkbits, 0);
+}
+
+static inline int dquot_prealloc_block(struct inode *inode, qsize_t nr)
+{
+	int ret;
+
+	ret = dquot_prealloc_block_nodirty(inode, nr);
+	if (!ret)
+		mark_inode_dirty_sync(inode);
+	return ret;
+}
+
+static inline int dquot_reserve_block(struct inode *inode, qsize_t nr)
+{
+	return __dquot_alloc_space(inode, nr << inode->i_blkbits,
+				DQUOT_SPACE_WARN|DQUOT_SPACE_RESERVE);
+}
+
+static inline int dquot_claim_block(struct inode *inode, qsize_t nr)
+{
+	int ret;
+
+	ret = dquot_claim_space_nodirty(inode, nr << inode->i_blkbits);
+	if (!ret)
+		mark_inode_dirty_sync(inode);
+	return ret;
+}
+
+static inline void dquot_free_space_nodirty(struct inode *inode, qsize_t nr)
+{
+	__dquot_free_space(inode, nr, 0);
+}
+
+static inline void dquot_free_space(struct inode *inode, qsize_t nr)
+{
+	dquot_free_space_nodirty(inode, nr);
+	mark_inode_dirty_sync(inode);
+}
+
+static inline void dquot_free_block_nodirty(struct inode *inode, qsize_t nr)
+{
+	dquot_free_space_nodirty(inode, nr << inode->i_blkbits);
+}
+
+static inline void dquot_free_block(struct inode *inode, qsize_t nr)
+{
+	dquot_free_space(inode, nr << inode->i_blkbits);
+}
+
+static inline void dquot_release_reservation_block(struct inode *inode,
+		qsize_t nr)
+{
+	__dquot_free_space(inode, nr << inode->i_blkbits, DQUOT_SPACE_RESERVE);
+}
+
+#endif /* _LINUX_QUOTAOPS_ */
diff --git a/include/linux/radeonfb.h b/include/linux/radeonfb.h
new file mode 100644
index 00000000..8c4bbdec
--- /dev/null
+++ b/include/linux/radeonfb.h
@@ -0,0 +1,15 @@
+#ifndef __LINUX_RADEONFB_H__
+#define __LINUX_RADEONFB_H__
+
+#include <asm/ioctl.h>
+#include <linux/types.h>
+
+#define ATY_RADEON_LCD_ON	0x00000001
+#define ATY_RADEON_CRT_ON	0x00000002
+
+
+#define FBIO_RADEON_GET_MIRROR	_IOR('@', 3, size_t)
+#define FBIO_RADEON_SET_MIRROR	_IOW('@', 4, size_t)
+
+#endif
+
diff --git a/include/linux/radix-tree.h b/include/linux/radix-tree.h
new file mode 100644
index 00000000..ffc444c3
--- /dev/null
+++ b/include/linux/radix-tree.h
@@ -0,0 +1,459 @@
+/*
+ * Copyright (C) 2001 Momchil Velikov
+ * Portions Copyright (C) 2001 Christoph Hellwig
+ * Copyright (C) 2006 Nick Piggin
+ * Copyright (C) 2012 Konstantin Khlebnikov
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2, or (at
+ * your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef _LINUX_RADIX_TREE_H
+#define _LINUX_RADIX_TREE_H
+
+#include <linux/preempt.h>
+#include <linux/types.h>
+#include <linux/bug.h>
+#include <linux/kernel.h>
+#include <linux/rcupdate.h>
+
+/*
+ * An indirect pointer (root->rnode pointing to a radix_tree_node, rather
+ * than a data item) is signalled by the low bit set in the root->rnode
+ * pointer.
+ *
+ * In this case root->height is > 0, but the indirect pointer tests are
+ * needed for RCU lookups (because root->height is unreliable). The only
+ * time callers need worry about this is when doing a lookup_slot under
+ * RCU.
+ *
+ * Indirect pointer in fact is also used to tag the last pointer of a node
+ * when it is shrunk, before we rcu free the node. See shrink code for
+ * details.
+ */
+#define RADIX_TREE_INDIRECT_PTR		1
+/*
+ * A common use of the radix tree is to store pointers to struct pages;
+ * but shmem/tmpfs needs also to store swap entries in the same tree:
+ * those are marked as exceptional entries to distinguish them.
+ * EXCEPTIONAL_ENTRY tests the bit, EXCEPTIONAL_SHIFT shifts content past it.
+ */
+#define RADIX_TREE_EXCEPTIONAL_ENTRY	2
+#define RADIX_TREE_EXCEPTIONAL_SHIFT	2
+
+static inline int radix_tree_is_indirect_ptr(void *ptr)
+{
+	return (int)((unsigned long)ptr & RADIX_TREE_INDIRECT_PTR);
+}
+
+/*** radix-tree API starts here ***/
+
+#define RADIX_TREE_MAX_TAGS 3
+
+/* root tags are stored in gfp_mask, shifted by __GFP_BITS_SHIFT */
+struct radix_tree_root {
+	unsigned int		height;
+	gfp_t			gfp_mask;
+	struct radix_tree_node	__rcu *rnode;
+};
+
+#define RADIX_TREE_INIT(mask)	{					\
+	.height = 0,							\
+	.gfp_mask = (mask),						\
+	.rnode = NULL,							\
+}
+
+#define RADIX_TREE(name, mask) \
+	struct radix_tree_root name = RADIX_TREE_INIT(mask)
+
+#define INIT_RADIX_TREE(root, mask)					\
+do {									\
+	(root)->height = 0;						\
+	(root)->gfp_mask = (mask);					\
+	(root)->rnode = NULL;						\
+} while (0)
+
+/**
+ * Radix-tree synchronization
+ *
+ * The radix-tree API requires that users provide all synchronisation (with
+ * specific exceptions, noted below).
+ *
+ * Synchronization of access to the data items being stored in the tree, and
+ * management of their lifetimes must be completely managed by API users.
+ *
+ * For API usage, in general,
+ * - any function _modifying_ the tree or tags (inserting or deleting
+ *   items, setting or clearing tags) must exclude other modifications, and
+ *   exclude any functions reading the tree.
+ * - any function _reading_ the tree or tags (looking up items or tags,
+ *   gang lookups) must exclude modifications to the tree, but may occur
+ *   concurrently with other readers.
+ *
+ * The notable exceptions to this rule are the following functions:
+ * radix_tree_lookup
+ * radix_tree_lookup_slot
+ * radix_tree_tag_get
+ * radix_tree_gang_lookup
+ * radix_tree_gang_lookup_slot
+ * radix_tree_gang_lookup_tag
+ * radix_tree_gang_lookup_tag_slot
+ * radix_tree_tagged
+ *
+ * The first 7 functions are able to be called locklessly, using RCU. The
+ * caller must ensure calls to these functions are made within rcu_read_lock()
+ * regions. Other readers (lock-free or otherwise) and modifications may be
+ * running concurrently.
+ *
+ * It is still required that the caller manage the synchronization and lifetimes
+ * of the items. So if RCU lock-free lookups are used, typically this would mean
+ * that the items have their own locks, or are amenable to lock-free access; and
+ * that the items are freed by RCU (or only freed after having been deleted from
+ * the radix tree *and* a synchronize_rcu() grace period).
+ *
+ * (Note, rcu_assign_pointer and rcu_dereference are not needed to control
+ * access to data items when inserting into or looking up from the radix tree)
+ *
+ * Note that the value returned by radix_tree_tag_get() may not be relied upon
+ * if only the RCU read lock is held.  Functions to set/clear tags and to
+ * delete nodes running concurrently with it may affect its result such that
+ * two consecutive reads in the same locked section may return different
+ * values.  If reliability is required, modification functions must also be
+ * excluded from concurrency.
+ *
+ * radix_tree_tagged is able to be called without locking or RCU.
+ */
+
+/**
+ * radix_tree_deref_slot	- dereference a slot
+ * @pslot:	pointer to slot, returned by radix_tree_lookup_slot
+ * Returns:	item that was stored in that slot with any direct pointer flag
+ *		removed.
+ *
+ * For use with radix_tree_lookup_slot().  Caller must hold tree at least read
+ * locked across slot lookup and dereference. Not required if write lock is
+ * held (ie. items cannot be concurrently inserted).
+ *
+ * radix_tree_deref_retry must be used to confirm validity of the pointer if
+ * only the read lock is held.
+ */
+static inline void *radix_tree_deref_slot(void **pslot)
+{
+	return rcu_dereference(*pslot);
+}
+
+/**
+ * radix_tree_deref_slot_protected	- dereference a slot without RCU lock but with tree lock held
+ * @pslot:	pointer to slot, returned by radix_tree_lookup_slot
+ * Returns:	item that was stored in that slot with any direct pointer flag
+ *		removed.
+ *
+ * Similar to radix_tree_deref_slot but only used during migration when a pages
+ * mapping is being moved. The caller does not hold the RCU read lock but it
+ * must hold the tree lock to prevent parallel updates.
+ */
+static inline void *radix_tree_deref_slot_protected(void **pslot,
+							spinlock_t *treelock)
+{
+	return rcu_dereference_protected(*pslot, lockdep_is_held(treelock));
+}
+
+/**
+ * radix_tree_deref_retry	- check radix_tree_deref_slot
+ * @arg:	pointer returned by radix_tree_deref_slot
+ * Returns:	0 if retry is not required, otherwise retry is required
+ *
+ * radix_tree_deref_retry must be used with radix_tree_deref_slot.
+ */
+static inline int radix_tree_deref_retry(void *arg)
+{
+	return unlikely((unsigned long)arg & RADIX_TREE_INDIRECT_PTR);
+}
+
+/**
+ * radix_tree_exceptional_entry	- radix_tree_deref_slot gave exceptional entry?
+ * @arg:	value returned by radix_tree_deref_slot
+ * Returns:	0 if well-aligned pointer, non-0 if exceptional entry.
+ */
+static inline int radix_tree_exceptional_entry(void *arg)
+{
+	/* Not unlikely because radix_tree_exception often tested first */
+	return (unsigned long)arg & RADIX_TREE_EXCEPTIONAL_ENTRY;
+}
+
+/**
+ * radix_tree_exception	- radix_tree_deref_slot returned either exception?
+ * @arg:	value returned by radix_tree_deref_slot
+ * Returns:	0 if well-aligned pointer, non-0 if either kind of exception.
+ */
+static inline int radix_tree_exception(void *arg)
+{
+	return unlikely((unsigned long)arg &
+		(RADIX_TREE_INDIRECT_PTR | RADIX_TREE_EXCEPTIONAL_ENTRY));
+}
+
+/**
+ * radix_tree_replace_slot	- replace item in a slot
+ * @pslot:	pointer to slot, returned by radix_tree_lookup_slot
+ * @item:	new item to store in the slot.
+ *
+ * For use with radix_tree_lookup_slot().  Caller must hold tree write locked
+ * across slot lookup and replacement.
+ */
+static inline void radix_tree_replace_slot(void **pslot, void *item)
+{
+	BUG_ON(radix_tree_is_indirect_ptr(item));
+	rcu_assign_pointer(*pslot, item);
+}
+
+int radix_tree_insert(struct radix_tree_root *, unsigned long, void *);
+void *radix_tree_lookup(struct radix_tree_root *, unsigned long);
+void **radix_tree_lookup_slot(struct radix_tree_root *, unsigned long);
+void *radix_tree_delete(struct radix_tree_root *, unsigned long);
+unsigned int
+radix_tree_gang_lookup(struct radix_tree_root *root, void **results,
+			unsigned long first_index, unsigned int max_items);
+unsigned int radix_tree_gang_lookup_slot(struct radix_tree_root *root,
+			void ***results, unsigned long *indices,
+			unsigned long first_index, unsigned int max_items);
+unsigned long radix_tree_next_hole(struct radix_tree_root *root,
+				unsigned long index, unsigned long max_scan);
+unsigned long radix_tree_prev_hole(struct radix_tree_root *root,
+				unsigned long index, unsigned long max_scan);
+int radix_tree_preload(gfp_t gfp_mask);
+void radix_tree_init(void);
+void *radix_tree_tag_set(struct radix_tree_root *root,
+			unsigned long index, unsigned int tag);
+void *radix_tree_tag_clear(struct radix_tree_root *root,
+			unsigned long index, unsigned int tag);
+int radix_tree_tag_get(struct radix_tree_root *root,
+			unsigned long index, unsigned int tag);
+unsigned int
+radix_tree_gang_lookup_tag(struct radix_tree_root *root, void **results,
+		unsigned long first_index, unsigned int max_items,
+		unsigned int tag);
+unsigned int
+radix_tree_gang_lookup_tag_slot(struct radix_tree_root *root, void ***results,
+		unsigned long first_index, unsigned int max_items,
+		unsigned int tag);
+unsigned long radix_tree_range_tag_if_tagged(struct radix_tree_root *root,
+		unsigned long *first_indexp, unsigned long last_index,
+		unsigned long nr_to_tag,
+		unsigned int fromtag, unsigned int totag);
+int radix_tree_tagged(struct radix_tree_root *root, unsigned int tag);
+unsigned long radix_tree_locate_item(struct radix_tree_root *root, void *item);
+
+static inline void radix_tree_preload_end(void)
+{
+	preempt_enable();
+}
+
+/**
+ * struct radix_tree_iter - radix tree iterator state
+ *
+ * @index:	index of current slot
+ * @next_index:	next-to-last index for this chunk
+ * @tags:	bit-mask for tag-iterating
+ *
+ * This radix tree iterator works in terms of "chunks" of slots.  A chunk is a
+ * subinterval of slots contained within one radix tree leaf node.  It is
+ * described by a pointer to its first slot and a struct radix_tree_iter
+ * which holds the chunk's position in the tree and its size.  For tagged
+ * iteration radix_tree_iter also holds the slots' bit-mask for one chosen
+ * radix tree tag.
+ */
+struct radix_tree_iter {
+	unsigned long	index;
+	unsigned long	next_index;
+	unsigned long	tags;
+};
+
+#define RADIX_TREE_ITER_TAG_MASK	0x00FF	/* tag index in lower byte */
+#define RADIX_TREE_ITER_TAGGED		0x0100	/* lookup tagged slots */
+#define RADIX_TREE_ITER_CONTIG		0x0200	/* stop at first hole */
+
+/**
+ * radix_tree_iter_init - initialize radix tree iterator
+ *
+ * @iter:	pointer to iterator state
+ * @start:	iteration starting index
+ * Returns:	NULL
+ */
+static __always_inline void **
+radix_tree_iter_init(struct radix_tree_iter *iter, unsigned long start)
+{
+	/*
+	 * Leave iter->tags uninitialized. radix_tree_next_chunk() will fill it
+	 * in the case of a successful tagged chunk lookup.  If the lookup was
+	 * unsuccessful or non-tagged then nobody cares about ->tags.
+	 *
+	 * Set index to zero to bypass next_index overflow protection.
+	 * See the comment in radix_tree_next_chunk() for details.
+	 */
+	iter->index = 0;
+	iter->next_index = start;
+	return NULL;
+}
+
+/**
+ * radix_tree_next_chunk - find next chunk of slots for iteration
+ *
+ * @root:	radix tree root
+ * @iter:	iterator state
+ * @flags:	RADIX_TREE_ITER_* flags and tag index
+ * Returns:	pointer to chunk first slot, or NULL if there no more left
+ *
+ * This function looks up the next chunk in the radix tree starting from
+ * @iter->next_index.  It returns a pointer to the chunk's first slot.
+ * Also it fills @iter with data about chunk: position in the tree (index),
+ * its end (next_index), and constructs a bit mask for tagged iterating (tags).
+ */
+void **radix_tree_next_chunk(struct radix_tree_root *root,
+			     struct radix_tree_iter *iter, unsigned flags);
+
+/**
+ * radix_tree_chunk_size - get current chunk size
+ *
+ * @iter:	pointer to radix tree iterator
+ * Returns:	current chunk size
+ */
+static __always_inline unsigned
+radix_tree_chunk_size(struct radix_tree_iter *iter)
+{
+	return iter->next_index - iter->index;
+}
+
+/**
+ * radix_tree_next_slot - find next slot in chunk
+ *
+ * @slot:	pointer to current slot
+ * @iter:	pointer to interator state
+ * @flags:	RADIX_TREE_ITER_*, should be constant
+ * Returns:	pointer to next slot, or NULL if there no more left
+ *
+ * This function updates @iter->index in the case of a successful lookup.
+ * For tagged lookup it also eats @iter->tags.
+ */
+static __always_inline void **
+radix_tree_next_slot(void **slot, struct radix_tree_iter *iter, unsigned flags)
+{
+	if (flags & RADIX_TREE_ITER_TAGGED) {
+		iter->tags >>= 1;
+		if (likely(iter->tags & 1ul)) {
+			iter->index++;
+			return slot + 1;
+		}
+		if (!(flags & RADIX_TREE_ITER_CONTIG) && likely(iter->tags)) {
+			unsigned offset = __ffs(iter->tags);
+
+			iter->tags >>= offset;
+			iter->index += offset + 1;
+			return slot + offset + 1;
+		}
+	} else {
+		unsigned size = radix_tree_chunk_size(iter) - 1;
+
+		while (size--) {
+			slot++;
+			iter->index++;
+			if (likely(*slot))
+				return slot;
+			if (flags & RADIX_TREE_ITER_CONTIG) {
+				/* forbid switching to the next chunk */
+				iter->next_index = 0;
+				break;
+			}
+		}
+	}
+	return NULL;
+}
+
+/**
+ * radix_tree_for_each_chunk - iterate over chunks
+ *
+ * @slot:	the void** variable for pointer to chunk first slot
+ * @root:	the struct radix_tree_root pointer
+ * @iter:	the struct radix_tree_iter pointer
+ * @start:	iteration starting index
+ * @flags:	RADIX_TREE_ITER_* and tag index
+ *
+ * Locks can be released and reacquired between iterations.
+ */
+#define radix_tree_for_each_chunk(slot, root, iter, start, flags)	\
+	for (slot = radix_tree_iter_init(iter, start) ;			\
+	      (slot = radix_tree_next_chunk(root, iter, flags)) ;)
+
+/**
+ * radix_tree_for_each_chunk_slot - iterate over slots in one chunk
+ *
+ * @slot:	the void** variable, at the beginning points to chunk first slot
+ * @iter:	the struct radix_tree_iter pointer
+ * @flags:	RADIX_TREE_ITER_*, should be constant
+ *
+ * This macro is designed to be nested inside radix_tree_for_each_chunk().
+ * @slot points to the radix tree slot, @iter->index contains its index.
+ */
+#define radix_tree_for_each_chunk_slot(slot, iter, flags)		\
+	for (; slot ; slot = radix_tree_next_slot(slot, iter, flags))
+
+/**
+ * radix_tree_for_each_slot - iterate over non-empty slots
+ *
+ * @slot:	the void** variable for pointer to slot
+ * @root:	the struct radix_tree_root pointer
+ * @iter:	the struct radix_tree_iter pointer
+ * @start:	iteration starting index
+ *
+ * @slot points to radix tree slot, @iter->index contains its index.
+ */
+#define radix_tree_for_each_slot(slot, root, iter, start)		\
+	for (slot = radix_tree_iter_init(iter, start) ;			\
+	     slot || (slot = radix_tree_next_chunk(root, iter, 0)) ;	\
+	     slot = radix_tree_next_slot(slot, iter, 0))
+
+/**
+ * radix_tree_for_each_contig - iterate over contiguous slots
+ *
+ * @slot:	the void** variable for pointer to slot
+ * @root:	the struct radix_tree_root pointer
+ * @iter:	the struct radix_tree_iter pointer
+ * @start:	iteration starting index
+ *
+ * @slot points to radix tree slot, @iter->index contains its index.
+ */
+#define radix_tree_for_each_contig(slot, root, iter, start)		\
+	for (slot = radix_tree_iter_init(iter, start) ;			\
+	     slot || (slot = radix_tree_next_chunk(root, iter,		\
+				RADIX_TREE_ITER_CONTIG)) ;		\
+	     slot = radix_tree_next_slot(slot, iter,			\
+				RADIX_TREE_ITER_CONTIG))
+
+/**
+ * radix_tree_for_each_tagged - iterate over tagged slots
+ *
+ * @slot:	the void** variable for pointer to slot
+ * @root:	the struct radix_tree_root pointer
+ * @iter:	the struct radix_tree_iter pointer
+ * @start:	iteration starting index
+ * @tag:	tag index
+ *
+ * @slot points to radix tree slot, @iter->index contains its index.
+ */
+#define radix_tree_for_each_tagged(slot, root, iter, start, tag)	\
+	for (slot = radix_tree_iter_init(iter, start) ;			\
+	     slot || (slot = radix_tree_next_chunk(root, iter,		\
+			      RADIX_TREE_ITER_TAGGED | tag)) ;		\
+	     slot = radix_tree_next_slot(slot, iter,			\
+				RADIX_TREE_ITER_TAGGED))
+
+#endif /* _LINUX_RADIX_TREE_H */
diff --git a/include/linux/raid/Kbuild b/include/linux/raid/Kbuild
new file mode 100644
index 00000000..2415a64c
--- /dev/null
+++ b/include/linux/raid/Kbuild
@@ -0,0 +1,2 @@
+header-y += md_p.h
+header-y += md_u.h
diff --git a/include/linux/raid/md_p.h b/include/linux/raid/md_p.h
new file mode 100644
index 00000000..8c0a3adc
--- /dev/null
+++ b/include/linux/raid/md_p.h
@@ -0,0 +1,290 @@
+/*
+   md_p.h : physical layout of Linux RAID devices
+          Copyright (C) 1996-98 Ingo Molnar, Gadi Oxman
+	  
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+   
+   You should have received a copy of the GNU General Public License
+   (for example /usr/src/linux/COPYING); if not, write to the Free
+   Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  
+*/
+
+#ifndef _MD_P_H
+#define _MD_P_H
+
+#include <linux/types.h>
+
+/*
+ * RAID superblock.
+ *
+ * The RAID superblock maintains some statistics on each RAID configuration.
+ * Each real device in the RAID set contains it near the end of the device.
+ * Some of the ideas are copied from the ext2fs implementation.
+ *
+ * We currently use 4096 bytes as follows:
+ *
+ *	word offset	function
+ *
+ *	   0  -    31	Constant generic RAID device information.
+ *        32  -    63   Generic state information.
+ *	  64  -   127	Personality specific information.
+ *	 128  -   511	12 32-words descriptors of the disks in the raid set.
+ *	 512  -   911	Reserved.
+ *	 912  -  1023	Disk specific descriptor.
+ */
+
+/*
+ * If x is the real device size in bytes, we return an apparent size of:
+ *
+ *	y = (x & ~(MD_RESERVED_BYTES - 1)) - MD_RESERVED_BYTES
+ *
+ * and place the 4kB superblock at offset y.
+ */
+#define MD_RESERVED_BYTES		(64 * 1024)
+#define MD_RESERVED_SECTORS		(MD_RESERVED_BYTES / 512)
+
+#define MD_NEW_SIZE_SECTORS(x)		((x & ~(MD_RESERVED_SECTORS - 1)) - MD_RESERVED_SECTORS)
+
+#define MD_SB_BYTES			4096
+#define MD_SB_WORDS			(MD_SB_BYTES / 4)
+#define MD_SB_SECTORS			(MD_SB_BYTES / 512)
+
+/*
+ * The following are counted in 32-bit words
+ */
+#define	MD_SB_GENERIC_OFFSET		0
+#define MD_SB_PERSONALITY_OFFSET	64
+#define MD_SB_DISKS_OFFSET		128
+#define MD_SB_DESCRIPTOR_OFFSET		992
+
+#define MD_SB_GENERIC_CONSTANT_WORDS	32
+#define MD_SB_GENERIC_STATE_WORDS	32
+#define MD_SB_GENERIC_WORDS		(MD_SB_GENERIC_CONSTANT_WORDS + MD_SB_GENERIC_STATE_WORDS)
+#define MD_SB_PERSONALITY_WORDS		64
+#define MD_SB_DESCRIPTOR_WORDS		32
+#define MD_SB_DISKS			27
+#define MD_SB_DISKS_WORDS		(MD_SB_DISKS*MD_SB_DESCRIPTOR_WORDS)
+#define MD_SB_RESERVED_WORDS		(1024 - MD_SB_GENERIC_WORDS - MD_SB_PERSONALITY_WORDS - MD_SB_DISKS_WORDS - MD_SB_DESCRIPTOR_WORDS)
+#define MD_SB_EQUAL_WORDS		(MD_SB_GENERIC_WORDS + MD_SB_PERSONALITY_WORDS + MD_SB_DISKS_WORDS)
+
+/*
+ * Device "operational" state bits
+ */
+#define MD_DISK_FAULTY		0 /* disk is faulty / operational */
+#define MD_DISK_ACTIVE		1 /* disk is running or spare disk */
+#define MD_DISK_SYNC		2 /* disk is in sync with the raid set */
+#define MD_DISK_REMOVED		3 /* disk is in sync with the raid set */
+
+#define	MD_DISK_WRITEMOSTLY	9 /* disk is "write-mostly" is RAID1 config.
+				   * read requests will only be sent here in
+				   * dire need
+				   */
+
+typedef struct mdp_device_descriptor_s {
+	__u32 number;		/* 0 Device number in the entire set	      */
+	__u32 major;		/* 1 Device major number		      */
+	__u32 minor;		/* 2 Device minor number		      */
+	__u32 raid_disk;	/* 3 The role of the device in the raid set   */
+	__u32 state;		/* 4 Operational state			      */
+	__u32 reserved[MD_SB_DESCRIPTOR_WORDS - 5];
+} mdp_disk_t;
+
+#define MD_SB_MAGIC		0xa92b4efc
+
+/*
+ * Superblock state bits
+ */
+#define MD_SB_CLEAN		0
+#define MD_SB_ERRORS		1
+
+#define	MD_SB_BITMAP_PRESENT	8 /* bitmap may be present nearby */
+
+/*
+ * Notes:
+ * - if an array is being reshaped (restriped) in order to change the
+ *   the number of active devices in the array, 'raid_disks' will be
+ *   the larger of the old and new numbers.  'delta_disks' will
+ *   be the "new - old".  So if +ve, raid_disks is the new value, and
+ *   "raid_disks-delta_disks" is the old.  If -ve, raid_disks is the
+ *   old value and "raid_disks+delta_disks" is the new (smaller) value.
+ */
+
+
+typedef struct mdp_superblock_s {
+	/*
+	 * Constant generic information
+	 */
+	__u32 md_magic;		/*  0 MD identifier 			      */
+	__u32 major_version;	/*  1 major version to which the set conforms */
+	__u32 minor_version;	/*  2 minor version ...			      */
+	__u32 patch_version;	/*  3 patchlevel version ...		      */
+	__u32 gvalid_words;	/*  4 Number of used words in this section    */
+	__u32 set_uuid0;	/*  5 Raid set identifier		      */
+	__u32 ctime;		/*  6 Creation time			      */
+	__u32 level;		/*  7 Raid personality			      */
+	__u32 size;		/*  8 Apparent size of each individual disk   */
+	__u32 nr_disks;		/*  9 total disks in the raid set	      */
+	__u32 raid_disks;	/* 10 disks in a fully functional raid set    */
+	__u32 md_minor;		/* 11 preferred MD minor device number	      */
+	__u32 not_persistent;	/* 12 does it have a persistent superblock    */
+	__u32 set_uuid1;	/* 13 Raid set identifier #2		      */
+	__u32 set_uuid2;	/* 14 Raid set identifier #3		      */
+	__u32 set_uuid3;	/* 15 Raid set identifier #4		      */
+	__u32 gstate_creserved[MD_SB_GENERIC_CONSTANT_WORDS - 16];
+
+	/*
+	 * Generic state information
+	 */
+	__u32 utime;		/*  0 Superblock update time		      */
+	__u32 state;		/*  1 State bits (clean, ...)		      */
+	__u32 active_disks;	/*  2 Number of currently active disks	      */
+	__u32 working_disks;	/*  3 Number of working disks		      */
+	__u32 failed_disks;	/*  4 Number of failed disks		      */
+	__u32 spare_disks;	/*  5 Number of spare disks		      */
+	__u32 sb_csum;		/*  6 checksum of the whole superblock        */
+#ifdef __BIG_ENDIAN
+	__u32 events_hi;	/*  7 high-order of superblock update count   */
+	__u32 events_lo;	/*  8 low-order of superblock update count    */
+	__u32 cp_events_hi;	/*  9 high-order of checkpoint update count   */
+	__u32 cp_events_lo;	/* 10 low-order of checkpoint update count    */
+#else
+	__u32 events_lo;	/*  7 low-order of superblock update count    */
+	__u32 events_hi;	/*  8 high-order of superblock update count   */
+	__u32 cp_events_lo;	/*  9 low-order of checkpoint update count    */
+	__u32 cp_events_hi;	/* 10 high-order of checkpoint update count   */
+#endif
+	__u32 recovery_cp;	/* 11 recovery checkpoint sector count	      */
+	/* There are only valid for minor_version > 90 */
+	__u64 reshape_position;	/* 12,13 next address in array-space for reshape */
+	__u32 new_level;	/* 14 new level we are reshaping to	      */
+	__u32 delta_disks;	/* 15 change in number of raid_disks	      */
+	__u32 new_layout;	/* 16 new layout			      */
+	__u32 new_chunk;	/* 17 new chunk size (bytes)		      */
+	__u32 gstate_sreserved[MD_SB_GENERIC_STATE_WORDS - 18];
+
+	/*
+	 * Personality information
+	 */
+	__u32 layout;		/*  0 the array's physical layout	      */
+	__u32 chunk_size;	/*  1 chunk size in bytes		      */
+	__u32 root_pv;		/*  2 LV root PV */
+	__u32 root_block;	/*  3 LV root block */
+	__u32 pstate_reserved[MD_SB_PERSONALITY_WORDS - 4];
+
+	/*
+	 * Disks information
+	 */
+	mdp_disk_t disks[MD_SB_DISKS];
+
+	/*
+	 * Reserved
+	 */
+	__u32 reserved[MD_SB_RESERVED_WORDS];
+
+	/*
+	 * Active descriptor
+	 */
+	mdp_disk_t this_disk;
+
+} mdp_super_t;
+
+static inline __u64 md_event(mdp_super_t *sb) {
+	__u64 ev = sb->events_hi;
+	return (ev<<32)| sb->events_lo;
+}
+
+#define MD_SUPERBLOCK_1_TIME_SEC_MASK ((1ULL<<40) - 1)
+
+/*
+ * The version-1 superblock :
+ * All numeric fields are little-endian.
+ *
+ * total size: 256 bytes plus 2 per device.
+ *  1K allows 384 devices.
+ */
+struct mdp_superblock_1 {
+	/* constant array information - 128 bytes */
+	__le32	magic;		/* MD_SB_MAGIC: 0xa92b4efc - little endian */
+	__le32	major_version;	/* 1 */
+	__le32	feature_map;	/* bit 0 set if 'bitmap_offset' is meaningful */
+	__le32	pad0;		/* always set to 0 when writing */
+
+	__u8	set_uuid[16];	/* user-space generated. */
+	char	set_name[32];	/* set and interpreted by user-space */
+
+	__le64	ctime;		/* lo 40 bits are seconds, top 24 are microseconds or 0*/
+	__le32	level;		/* -4 (multipath), -1 (linear), 0,1,4,5 */
+	__le32	layout;		/* only for raid5 and raid10 currently */
+	__le64	size;		/* used size of component devices, in 512byte sectors */
+
+	__le32	chunksize;	/* in 512byte sectors */
+	__le32	raid_disks;
+	__le32	bitmap_offset;	/* sectors after start of superblock that bitmap starts
+				 * NOTE: signed, so bitmap can be before superblock
+				 * only meaningful of feature_map[0] is set.
+				 */
+
+	/* These are only valid with feature bit '4' */
+	__le32	new_level;	/* new level we are reshaping to		*/
+	__le64	reshape_position;	/* next address in array-space for reshape */
+	__le32	delta_disks;	/* change in number of raid_disks		*/
+	__le32	new_layout;	/* new layout					*/
+	__le32	new_chunk;	/* new chunk size (512byte sectors)		*/
+	__u8	pad1[128-124];	/* set to 0 when written */
+
+	/* constant this-device information - 64 bytes */
+	__le64	data_offset;	/* sector start of data, often 0 */
+	__le64	data_size;	/* sectors in this device that can be used for data */
+	__le64	super_offset;	/* sector start of this superblock */
+	__le64	recovery_offset;/* sectors before this offset (from data_offset) have been recovered */
+	__le32	dev_number;	/* permanent identifier of this  device - not role in raid */
+	__le32	cnt_corrected_read; /* number of read errors that were corrected by re-writing */
+	__u8	device_uuid[16]; /* user-space setable, ignored by kernel */
+	__u8	devflags;	/* per-device flags.  Only one defined...*/
+#define	WriteMostly1	1	/* mask for writemostly flag in above */
+	/* Bad block log.  If there are any bad blocks the feature flag is set.
+	 * If offset and size are non-zero, that space is reserved and available
+	 */
+	__u8	bblog_shift;	/* shift from sectors to block size */
+	__le16	bblog_size;	/* number of sectors reserved for list */
+	__le32	bblog_offset;	/* sector offset from superblock to bblog,
+				 * signed - not unsigned */
+
+	/* array state information - 64 bytes */
+	__le64	utime;		/* 40 bits second, 24 bits microseconds */
+	__le64	events;		/* incremented when superblock updated */
+	__le64	resync_offset;	/* data before this offset (from data_offset) known to be in sync */
+	__le32	sb_csum;	/* checksum up to devs[max_dev] */
+	__le32	max_dev;	/* size of devs[] array to consider */
+	__u8	pad3[64-32];	/* set to 0 when writing */
+
+	/* device state information. Indexed by dev_number.
+	 * 2 bytes per device
+	 * Note there are no per-device state flags. State information is rolled
+	 * into the 'roles' value.  If a device is spare or faulty, then it doesn't
+	 * have a meaningful role.
+	 */
+	__le16	dev_roles[0];	/* role in array, or 0xffff for a spare, or 0xfffe for faulty */
+};
+
+/* feature_map bits */
+#define MD_FEATURE_BITMAP_OFFSET	1
+#define	MD_FEATURE_RECOVERY_OFFSET	2 /* recovery_offset is present and
+					   * must be honoured
+					   */
+#define	MD_FEATURE_RESHAPE_ACTIVE	4
+#define	MD_FEATURE_BAD_BLOCKS		8 /* badblock list is not empty */
+#define	MD_FEATURE_REPLACEMENT		16 /* This device is replacing an
+					    * active device with same 'role'.
+					    * 'recovery_offset' is also set.
+					    */
+#define	MD_FEATURE_ALL			(MD_FEATURE_BITMAP_OFFSET	\
+					|MD_FEATURE_RECOVERY_OFFSET	\
+					|MD_FEATURE_RESHAPE_ACTIVE	\
+					|MD_FEATURE_BAD_BLOCKS		\
+					|MD_FEATURE_REPLACEMENT)
+
+#endif 
diff --git a/include/linux/raid/md_u.h b/include/linux/raid/md_u.h
new file mode 100644
index 00000000..fb1abb33
--- /dev/null
+++ b/include/linux/raid/md_u.h
@@ -0,0 +1,159 @@
+/*
+   md_u.h : user <=> kernel API between Linux raidtools and RAID drivers
+          Copyright (C) 1998 Ingo Molnar
+	  
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+   
+   You should have received a copy of the GNU General Public License
+   (for example /usr/src/linux/COPYING); if not, write to the Free
+   Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  
+*/
+
+#ifndef _MD_U_H
+#define _MD_U_H
+
+/*
+ * Different major versions are not compatible.
+ * Different minor versions are only downward compatible.
+ * Different patchlevel versions are downward and upward compatible.
+ */
+#define MD_MAJOR_VERSION                0
+#define MD_MINOR_VERSION                90
+/*
+ * MD_PATCHLEVEL_VERSION indicates kernel functionality.
+ * >=1 means different superblock formats are selectable using SET_ARRAY_INFO
+ *     and major_version/minor_version accordingly
+ * >=2 means that Internal bitmaps are supported by setting MD_SB_BITMAP_PRESENT
+ *     in the super status byte
+ * >=3 means that bitmap superblock version 4 is supported, which uses
+ *     little-ending representation rather than host-endian
+ */
+#define MD_PATCHLEVEL_VERSION           3
+
+/* ioctls */
+
+/* status */
+#define RAID_VERSION		_IOR (MD_MAJOR, 0x10, mdu_version_t)
+#define GET_ARRAY_INFO		_IOR (MD_MAJOR, 0x11, mdu_array_info_t)
+#define GET_DISK_INFO		_IOR (MD_MAJOR, 0x12, mdu_disk_info_t)
+#define PRINT_RAID_DEBUG	_IO (MD_MAJOR, 0x13)
+#define RAID_AUTORUN		_IO (MD_MAJOR, 0x14)
+#define GET_BITMAP_FILE		_IOR (MD_MAJOR, 0x15, mdu_bitmap_file_t)
+
+/* configuration */
+#define CLEAR_ARRAY		_IO (MD_MAJOR, 0x20)
+#define ADD_NEW_DISK		_IOW (MD_MAJOR, 0x21, mdu_disk_info_t)
+#define HOT_REMOVE_DISK		_IO (MD_MAJOR, 0x22)
+#define SET_ARRAY_INFO		_IOW (MD_MAJOR, 0x23, mdu_array_info_t)
+#define SET_DISK_INFO		_IO (MD_MAJOR, 0x24)
+#define WRITE_RAID_INFO		_IO (MD_MAJOR, 0x25)
+#define UNPROTECT_ARRAY		_IO (MD_MAJOR, 0x26)
+#define PROTECT_ARRAY		_IO (MD_MAJOR, 0x27)
+#define HOT_ADD_DISK		_IO (MD_MAJOR, 0x28)
+#define SET_DISK_FAULTY		_IO (MD_MAJOR, 0x29)
+#define HOT_GENERATE_ERROR	_IO (MD_MAJOR, 0x2a)
+#define SET_BITMAP_FILE		_IOW (MD_MAJOR, 0x2b, int)
+
+/* usage */
+#define RUN_ARRAY		_IOW (MD_MAJOR, 0x30, mdu_param_t)
+/*  0x31 was START_ARRAY  */
+#define STOP_ARRAY		_IO (MD_MAJOR, 0x32)
+#define STOP_ARRAY_RO		_IO (MD_MAJOR, 0x33)
+#define RESTART_ARRAY_RW	_IO (MD_MAJOR, 0x34)
+
+/* 63 partitions with the alternate major number (mdp) */
+#define MdpMinorShift 6
+#ifdef __KERNEL__
+extern int mdp_major;
+#endif
+
+typedef struct mdu_version_s {
+	int major;
+	int minor;
+	int patchlevel;
+} mdu_version_t;
+
+typedef struct mdu_array_info_s {
+	/*
+	 * Generic constant information
+	 */
+	int major_version;
+	int minor_version;
+	int patch_version;
+	int ctime;
+	int level;
+	int size;
+	int nr_disks;
+	int raid_disks;
+	int md_minor;
+	int not_persistent;
+
+	/*
+	 * Generic state information
+	 */
+	int utime;		/*  0 Superblock update time		      */
+	int state;		/*  1 State bits (clean, ...)		      */
+	int active_disks;	/*  2 Number of currently active disks	      */
+	int working_disks;	/*  3 Number of working disks		      */
+	int failed_disks;	/*  4 Number of failed disks		      */
+	int spare_disks;	/*  5 Number of spare disks		      */
+
+	/*
+	 * Personality information
+	 */
+	int layout;		/*  0 the array's physical layout	      */
+	int chunk_size;	/*  1 chunk size in bytes		      */
+
+} mdu_array_info_t;
+
+/* non-obvious values for 'level' */
+#define	LEVEL_MULTIPATH		(-4)
+#define	LEVEL_LINEAR		(-1)
+#define	LEVEL_FAULTY		(-5)
+
+/* we need a value for 'no level specified' and 0
+ * means 'raid0', so we need something else.  This is
+ * for internal use only
+ */
+#define	LEVEL_NONE		(-1000000)
+
+typedef struct mdu_disk_info_s {
+	/*
+	 * configuration/status of one particular disk
+	 */
+	int number;
+	int major;
+	int minor;
+	int raid_disk;
+	int state;
+
+} mdu_disk_info_t;
+
+typedef struct mdu_start_info_s {
+	/*
+	 * configuration/status of one particular disk
+	 */
+	int major;
+	int minor;
+	int raid_disk;
+	int state;
+
+} mdu_start_info_t;
+
+typedef struct mdu_bitmap_file_s
+{
+	char pathname[4096];
+} mdu_bitmap_file_t;
+
+typedef struct mdu_param_s
+{
+	int			personality;	/* 1,2,3,4 */
+	int			chunk_size;	/* in bytes */
+	int			max_fault;	/* unused for now */
+} mdu_param_t;
+
+#endif 
+
diff --git a/include/linux/raid/pq.h b/include/linux/raid/pq.h
new file mode 100644
index 00000000..53272e98
--- /dev/null
+++ b/include/linux/raid/pq.h
@@ -0,0 +1,153 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ *   Copyright 2003 H. Peter Anvin - All Rights Reserved
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, Inc., 53 Temple Place Ste 330,
+ *   Boston MA 02111-1307, USA; either version 2 of the License, or
+ *   (at your option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+#ifndef LINUX_RAID_RAID6_H
+#define LINUX_RAID_RAID6_H
+
+#ifdef __KERNEL__
+
+/* Set to 1 to use kernel-wide empty_zero_page */
+#define RAID6_USE_EMPTY_ZERO_PAGE 0
+#include <linux/blkdev.h>
+
+/* We need a pre-zeroed page... if we don't want to use the kernel-provided
+   one define it here */
+#if RAID6_USE_EMPTY_ZERO_PAGE
+# define raid6_empty_zero_page empty_zero_page
+#else
+extern const char raid6_empty_zero_page[PAGE_SIZE];
+#endif
+
+#else /* ! __KERNEL__ */
+/* Used for testing in user space */
+
+#include <errno.h>
+#include <inttypes.h>
+#include <limits.h>
+#include <stddef.h>
+#include <sys/mman.h>
+#include <sys/types.h>
+
+/* Not standard, but glibc defines it */
+#define BITS_PER_LONG __WORDSIZE
+
+typedef uint8_t  u8;
+typedef uint16_t u16;
+typedef uint32_t u32;
+typedef uint64_t u64;
+
+#ifndef PAGE_SIZE
+# define PAGE_SIZE 4096
+#endif
+extern const char raid6_empty_zero_page[PAGE_SIZE];
+
+#define __init
+#define __exit
+#define __attribute_const__ __attribute__((const))
+#define noinline __attribute__((noinline))
+
+#define preempt_enable()
+#define preempt_disable()
+#define cpu_has_feature(x) 1
+#define enable_kernel_altivec()
+#define disable_kernel_altivec()
+
+#define EXPORT_SYMBOL(sym)
+#define EXPORT_SYMBOL_GPL(sym)
+#define MODULE_LICENSE(licence)
+#define MODULE_DESCRIPTION(desc)
+#define subsys_initcall(x)
+#define module_exit(x)
+#endif /* __KERNEL__ */
+
+/* Routine choices */
+struct raid6_calls {
+	void (*gen_syndrome)(int, size_t, void **);
+	int  (*valid)(void);	/* Returns 1 if this routine set is usable */
+	const char *name;	/* Name of this routine set */
+	int prefer;		/* Has special performance attribute */
+};
+
+/* Selected algorithm */
+extern struct raid6_calls raid6_call;
+
+/* Various routine sets */
+extern const struct raid6_calls raid6_intx1;
+extern const struct raid6_calls raid6_intx2;
+extern const struct raid6_calls raid6_intx4;
+extern const struct raid6_calls raid6_intx8;
+extern const struct raid6_calls raid6_intx16;
+extern const struct raid6_calls raid6_intx32;
+extern const struct raid6_calls raid6_mmxx1;
+extern const struct raid6_calls raid6_mmxx2;
+extern const struct raid6_calls raid6_sse1x1;
+extern const struct raid6_calls raid6_sse1x2;
+extern const struct raid6_calls raid6_sse2x1;
+extern const struct raid6_calls raid6_sse2x2;
+extern const struct raid6_calls raid6_sse2x4;
+extern const struct raid6_calls raid6_altivec1;
+extern const struct raid6_calls raid6_altivec2;
+extern const struct raid6_calls raid6_altivec4;
+extern const struct raid6_calls raid6_altivec8;
+
+/* Algorithm list */
+extern const struct raid6_calls * const raid6_algos[];
+int raid6_select_algo(void);
+
+/* Return values from chk_syndrome */
+#define RAID6_OK	0
+#define RAID6_P_BAD	1
+#define RAID6_Q_BAD	2
+#define RAID6_PQ_BAD	3
+
+/* Galois field tables */
+extern const u8 raid6_gfmul[256][256] __attribute__((aligned(256)));
+extern const u8 raid6_gfexp[256]      __attribute__((aligned(256)));
+extern const u8 raid6_gfinv[256]      __attribute__((aligned(256)));
+extern const u8 raid6_gfexi[256]      __attribute__((aligned(256)));
+
+/* Recovery routines */
+void raid6_2data_recov(int disks, size_t bytes, int faila, int failb,
+		       void **ptrs);
+void raid6_datap_recov(int disks, size_t bytes, int faila, void **ptrs);
+void raid6_dual_recov(int disks, size_t bytes, int faila, int failb,
+		      void **ptrs);
+
+/* Some definitions to allow code to be compiled for testing in userspace */
+#ifndef __KERNEL__
+
+# define jiffies	raid6_jiffies()
+# define printk 	printf
+# define GFP_KERNEL	0
+# define __get_free_pages(x, y)	((unsigned long)mmap(NULL, PAGE_SIZE << (y), \
+						     PROT_READ|PROT_WRITE,   \
+						     MAP_PRIVATE|MAP_ANONYMOUS,\
+						     0, 0))
+# define free_pages(x, y)	munmap((void *)(x), PAGE_SIZE << (y))
+
+static inline void cpu_relax(void)
+{
+	/* Nothing */
+}
+
+#undef  HZ
+#define HZ 1000
+static inline uint32_t raid6_jiffies(void)
+{
+	struct timeval tv;
+	gettimeofday(&tv, NULL);
+	return tv.tv_sec*1000 + tv.tv_usec/1000;
+}
+
+#endif /* ! __KERNEL__ */
+
+#endif /* LINUX_RAID_RAID6_H */
diff --git a/include/linux/raid/xor.h b/include/linux/raid/xor.h
new file mode 100644
index 00000000..5a210959
--- /dev/null
+++ b/include/linux/raid/xor.h
@@ -0,0 +1,22 @@
+#ifndef _XOR_H
+#define _XOR_H
+
+#define MAX_XOR_BLOCKS 4
+
+extern void xor_blocks(unsigned int count, unsigned int bytes,
+	void *dest, void **srcs);
+
+struct xor_block_template {
+        struct xor_block_template *next;
+        const char *name;
+        int speed;
+	void (*do_2)(unsigned long, unsigned long *, unsigned long *);
+	void (*do_3)(unsigned long, unsigned long *, unsigned long *,
+		     unsigned long *);
+	void (*do_4)(unsigned long, unsigned long *, unsigned long *,
+		     unsigned long *, unsigned long *);
+	void (*do_5)(unsigned long, unsigned long *, unsigned long *,
+		     unsigned long *, unsigned long *, unsigned long *);
+};
+
+#endif
diff --git a/include/linux/raid_class.h b/include/linux/raid_class.h
new file mode 100644
index 00000000..31e1ff69
--- /dev/null
+++ b/include/linux/raid_class.h
@@ -0,0 +1,83 @@
+/*
+ * raid_class.h - a generic raid visualisation class
+ *
+ * Copyright (c) 2005 - James Bottomley <James.Bottomley@steeleye.com>
+ *
+ * This file is licensed under GPLv2
+ */
+#include <linux/transport_class.h>
+
+struct raid_template {
+	struct transport_container raid_attrs;
+};
+
+struct raid_function_template {
+	void *cookie;
+	int (*is_raid)(struct device *);
+	void (*get_resync)(struct device *);
+	void (*get_state)(struct device *);
+};
+
+enum raid_state {
+	RAID_STATE_UNKNOWN = 0,
+	RAID_STATE_ACTIVE,
+	RAID_STATE_DEGRADED,
+	RAID_STATE_RESYNCING,
+	RAID_STATE_OFFLINE,
+};
+
+enum raid_level {
+	RAID_LEVEL_UNKNOWN = 0,
+	RAID_LEVEL_LINEAR,
+	RAID_LEVEL_0,
+	RAID_LEVEL_1,
+	RAID_LEVEL_10,
+	RAID_LEVEL_1E,
+	RAID_LEVEL_3,
+	RAID_LEVEL_4,
+	RAID_LEVEL_5,
+	RAID_LEVEL_50,
+	RAID_LEVEL_6,
+};
+
+struct raid_data {
+	struct list_head component_list;
+	int component_count;
+	enum raid_level level;
+	enum raid_state state;
+	int resync;
+};
+
+/* resync complete goes from 0 to this */
+#define RAID_MAX_RESYNC		(10000)
+
+#define DEFINE_RAID_ATTRIBUTE(type, attr)				      \
+static inline void							      \
+raid_set_##attr(struct raid_template *r, struct device *dev, type value) {    \
+	struct device *device =						      \
+		attribute_container_find_class_device(&r->raid_attrs.ac, dev);\
+	struct raid_data *rd;						      \
+	BUG_ON(!device);						      \
+	rd = dev_get_drvdata(device);					      \
+	rd->attr = value;						      \
+}									      \
+static inline type							      \
+raid_get_##attr(struct raid_template *r, struct device *dev) {		      \
+	struct device *device =						      \
+		attribute_container_find_class_device(&r->raid_attrs.ac, dev);\
+	struct raid_data *rd;						      \
+	BUG_ON(!device);						      \
+	rd = dev_get_drvdata(device);					      \
+	return rd->attr;						      \
+}
+
+DEFINE_RAID_ATTRIBUTE(enum raid_level, level)
+DEFINE_RAID_ATTRIBUTE(int, resync)
+DEFINE_RAID_ATTRIBUTE(enum raid_state, state)
+	
+struct raid_template *raid_class_attach(struct raid_function_template *);
+void raid_class_release(struct raid_template *);
+
+int __must_check raid_component_add(struct raid_template *, struct device *,
+				    struct device *);
+
diff --git a/include/linux/ramfs.h b/include/linux/ramfs.h
new file mode 100644
index 00000000..5bf5500d
--- /dev/null
+++ b/include/linux/ramfs.h
@@ -0,0 +1,26 @@
+#ifndef _LINUX_RAMFS_H
+#define _LINUX_RAMFS_H
+
+struct inode *ramfs_get_inode(struct super_block *sb, const struct inode *dir,
+	 umode_t mode, dev_t dev);
+extern struct dentry *ramfs_mount(struct file_system_type *fs_type,
+	 int flags, const char *dev_name, void *data);
+
+#ifndef CONFIG_MMU
+extern int ramfs_nommu_expand_for_mapping(struct inode *inode, size_t newsize);
+extern unsigned long ramfs_nommu_get_unmapped_area(struct file *file,
+						   unsigned long addr,
+						   unsigned long len,
+						   unsigned long pgoff,
+						   unsigned long flags);
+
+extern int ramfs_nommu_mmap(struct file *file, struct vm_area_struct *vma);
+#endif
+
+extern const struct file_operations ramfs_file_operations;
+extern const struct vm_operations_struct generic_file_vm_ops;
+extern int __init init_rootfs(void);
+
+int ramfs_fill_super(struct super_block *sb, void *data, int silent);
+
+#endif
diff --git a/include/linux/ramoops.h b/include/linux/ramoops.h
new file mode 100644
index 00000000..484fef81
--- /dev/null
+++ b/include/linux/ramoops.h
@@ -0,0 +1,17 @@
+#ifndef __RAMOOPS_H
+#define __RAMOOPS_H
+
+/*
+ * Ramoops platform data
+ * @mem_size	memory size for ramoops
+ * @mem_address	physical memory address to contain ramoops
+ */
+
+struct ramoops_platform_data {
+	unsigned long	mem_size;
+	unsigned long	mem_address;
+	unsigned long	record_size;
+	int		dump_oops;
+};
+
+#endif
diff --git a/include/linux/random.h b/include/linux/random.h
new file mode 100644
index 00000000..8f74538c
--- /dev/null
+++ b/include/linux/random.h
@@ -0,0 +1,109 @@
+/*
+ * include/linux/random.h
+ *
+ * Include file for the random number generator.
+ */
+
+#ifndef _LINUX_RANDOM_H
+#define _LINUX_RANDOM_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+#include <linux/irqnr.h>
+
+/* ioctl()'s for the random number generator */
+
+/* Get the entropy count. */
+#define RNDGETENTCNT	_IOR( 'R', 0x00, int )
+
+/* Add to (or subtract from) the entropy count.  (Superuser only.) */
+#define RNDADDTOENTCNT	_IOW( 'R', 0x01, int )
+
+/* Get the contents of the entropy pool.  (Superuser only.) */
+#define RNDGETPOOL	_IOR( 'R', 0x02, int [2] )
+
+/* 
+ * Write bytes into the entropy pool and add to the entropy count.
+ * (Superuser only.)
+ */
+#define RNDADDENTROPY	_IOW( 'R', 0x03, int [2] )
+
+/* Clear entropy count to 0.  (Superuser only.) */
+#define RNDZAPENTCNT	_IO( 'R', 0x04 )
+
+/* Clear the entropy pool and associated counters.  (Superuser only.) */
+#define RNDCLEARPOOL	_IO( 'R', 0x06 )
+
+struct rand_pool_info {
+	int	entropy_count;
+	int	buf_size;
+	__u32	buf[0];
+};
+
+struct rnd_state {
+	__u32 s1, s2, s3;
+};
+
+/* Exported functions */
+
+#ifdef __KERNEL__
+
+extern void rand_initialize_irq(int irq);
+
+extern void add_input_randomness(unsigned int type, unsigned int code,
+				 unsigned int value);
+extern void add_interrupt_randomness(int irq);
+
+extern void get_random_bytes(void *buf, int nbytes);
+void generate_random_uuid(unsigned char uuid_out[16]);
+
+#ifndef MODULE
+extern const struct file_operations random_fops, urandom_fops;
+#endif
+
+unsigned int get_random_int(void);
+unsigned long randomize_range(unsigned long start, unsigned long end, unsigned long len);
+
+u32 random32(void);
+void srandom32(u32 seed);
+
+u32 prandom32(struct rnd_state *);
+
+/*
+ * Handle minimum values for seeds
+ */
+static inline u32 __seed(u32 x, u32 m)
+{
+	return (x < m) ? x + m : x;
+}
+
+/**
+ * prandom32_seed - set seed for prandom32().
+ * @state: pointer to state structure to receive the seed.
+ * @seed: arbitrary 64-bit value to use as a seed.
+ */
+static inline void prandom32_seed(struct rnd_state *state, u64 seed)
+{
+	u32 i = (seed >> 32) ^ (seed << 10) ^ seed;
+
+	state->s1 = __seed(i, 1);
+	state->s2 = __seed(i, 7);
+	state->s3 = __seed(i, 15);
+}
+
+#ifdef CONFIG_ARCH_RANDOM
+# include <asm/archrandom.h>
+#else
+static inline int arch_get_random_long(unsigned long *v)
+{
+	return 0;
+}
+static inline int arch_get_random_int(unsigned int *v)
+{
+	return 0;
+}
+#endif
+
+#endif /* __KERNEL___ */
+
+#endif /* _LINUX_RANDOM_H */
diff --git a/include/linux/range.h b/include/linux/range.h
new file mode 100644
index 00000000..bd184a5d
--- /dev/null
+++ b/include/linux/range.h
@@ -0,0 +1,30 @@
+#ifndef _LINUX_RANGE_H
+#define _LINUX_RANGE_H
+
+struct range {
+	u64   start;
+	u64   end;
+};
+
+int add_range(struct range *range, int az, int nr_range,
+		u64 start, u64 end);
+
+
+int add_range_with_merge(struct range *range, int az, int nr_range,
+				u64 start, u64 end);
+
+void subtract_range(struct range *range, int az, u64 start, u64 end);
+
+int clean_sort_range(struct range *range, int az);
+
+void sort_range(struct range *range, int nr_range);
+
+#define MAX_RESOURCE ((resource_size_t)~0)
+static inline resource_size_t cap_resource(u64 val)
+{
+	if (val > MAX_RESOURCE)
+		return MAX_RESOURCE;
+
+	return val;
+}
+#endif
diff --git a/include/linux/ratelimit.h b/include/linux/ratelimit.h
new file mode 100644
index 00000000..e11ccb4c
--- /dev/null
+++ b/include/linux/ratelimit.h
@@ -0,0 +1,84 @@
+#ifndef _LINUX_RATELIMIT_H
+#define _LINUX_RATELIMIT_H
+
+#include <linux/param.h>
+#include <linux/spinlock.h>
+
+#define DEFAULT_RATELIMIT_INTERVAL	(5 * HZ)
+#define DEFAULT_RATELIMIT_BURST		10
+
+struct ratelimit_state {
+	raw_spinlock_t	lock;		/* protect the state */
+
+	int		interval;
+	int		burst;
+	int		printed;
+	int		missed;
+	unsigned long	begin;
+};
+
+#define DEFINE_RATELIMIT_STATE(name, interval_init, burst_init)		\
+									\
+	struct ratelimit_state name = {					\
+		.lock		= __RAW_SPIN_LOCK_UNLOCKED(name.lock),	\
+		.interval	= interval_init,			\
+		.burst		= burst_init,				\
+	}
+
+static inline void ratelimit_state_init(struct ratelimit_state *rs,
+					int interval, int burst)
+{
+	raw_spin_lock_init(&rs->lock);
+	rs->interval = interval;
+	rs->burst = burst;
+	rs->printed = 0;
+	rs->missed = 0;
+	rs->begin = 0;
+}
+
+extern struct ratelimit_state printk_ratelimit_state;
+
+extern int ___ratelimit(struct ratelimit_state *rs, const char *func);
+#define __ratelimit(state) ___ratelimit(state, __func__)
+
+#ifdef CONFIG_PRINTK
+
+#define WARN_ON_RATELIMIT(condition, state)			\
+		WARN_ON((condition) && __ratelimit(state))
+
+#define __WARN_RATELIMIT(condition, state, format...)		\
+({								\
+	int rtn = 0;						\
+	if (unlikely(__ratelimit(state)))			\
+		rtn = WARN(condition, format);			\
+	rtn;							\
+})
+
+#define WARN_RATELIMIT(condition, format...)			\
+({								\
+	static DEFINE_RATELIMIT_STATE(_rs,			\
+				      DEFAULT_RATELIMIT_INTERVAL,	\
+				      DEFAULT_RATELIMIT_BURST);	\
+	__WARN_RATELIMIT(condition, &_rs, format);		\
+})
+
+#else
+
+#define WARN_ON_RATELIMIT(condition, state)			\
+	WARN_ON(condition)
+
+#define __WARN_RATELIMIT(condition, state, format...)		\
+({								\
+	int rtn = WARN(condition, format);			\
+	rtn;							\
+})
+
+#define WARN_RATELIMIT(condition, format...)			\
+({								\
+	int rtn = WARN(condition, format);			\
+	rtn;							\
+})
+
+#endif
+
+#endif /* _LINUX_RATELIMIT_H */
diff --git a/include/linux/rational.h b/include/linux/rational.h
new file mode 100644
index 00000000..4f532fcd
--- /dev/null
+++ b/include/linux/rational.h
@@ -0,0 +1,19 @@
+/*
+ * rational fractions
+ *
+ * Copyright (C) 2009 emlix GmbH, Oskar Schirmer <os@emlix.com>
+ *
+ * helper functions when coping with rational numbers,
+ * e.g. when calculating optimum numerator/denominator pairs for
+ * pll configuration taking into account restricted register size
+ */
+
+#ifndef _LINUX_RATIONAL_H
+#define _LINUX_RATIONAL_H
+
+void rational_best_approximation(
+	unsigned long given_numerator, unsigned long given_denominator,
+	unsigned long max_numerator, unsigned long max_denominator,
+	unsigned long *best_numerator, unsigned long *best_denominator);
+
+#endif /* _LINUX_RATIONAL_H */
diff --git a/include/linux/raw.h b/include/linux/raw.h
new file mode 100644
index 00000000..62d543e7
--- /dev/null
+++ b/include/linux/raw.h
@@ -0,0 +1,18 @@
+#ifndef __LINUX_RAW_H
+#define __LINUX_RAW_H
+
+#include <linux/types.h>
+
+#define RAW_SETBIND	_IO( 0xac, 0 )
+#define RAW_GETBIND	_IO( 0xac, 1 )
+
+struct raw_config_request 
+{
+	int	raw_minor;
+	__u64	block_major;
+	__u64	block_minor;
+};
+
+#define MAX_RAW_MINORS CONFIG_MAX_RAW_DEVS
+
+#endif /* __LINUX_RAW_H */
diff --git a/include/linux/rbtree.h b/include/linux/rbtree.h
new file mode 100644
index 00000000..033b507b
--- /dev/null
+++ b/include/linux/rbtree.h
@@ -0,0 +1,177 @@
+/*
+  Red Black Trees
+  (C) 1999  Andrea Arcangeli <andrea@suse.de>
+  
+  This program is free software; you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation; either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program; if not, write to the Free Software
+  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+  linux/include/linux/rbtree.h
+
+  To use rbtrees you'll have to implement your own insert and search cores.
+  This will avoid us to use callbacks and to drop drammatically performances.
+  I know it's not the cleaner way,  but in C (not in C++) to get
+  performances and genericity...
+
+  Some example of insert and search follows here. The search is a plain
+  normal search over an ordered tree. The insert instead must be implemented
+  in two steps: First, the code must insert the element in order as a red leaf
+  in the tree, and then the support library function rb_insert_color() must
+  be called. Such function will do the not trivial work to rebalance the
+  rbtree, if necessary.
+
+-----------------------------------------------------------------------
+static inline struct page * rb_search_page_cache(struct inode * inode,
+						 unsigned long offset)
+{
+	struct rb_node * n = inode->i_rb_page_cache.rb_node;
+	struct page * page;
+
+	while (n)
+	{
+		page = rb_entry(n, struct page, rb_page_cache);
+
+		if (offset < page->offset)
+			n = n->rb_left;
+		else if (offset > page->offset)
+			n = n->rb_right;
+		else
+			return page;
+	}
+	return NULL;
+}
+
+static inline struct page * __rb_insert_page_cache(struct inode * inode,
+						   unsigned long offset,
+						   struct rb_node * node)
+{
+	struct rb_node ** p = &inode->i_rb_page_cache.rb_node;
+	struct rb_node * parent = NULL;
+	struct page * page;
+
+	while (*p)
+	{
+		parent = *p;
+		page = rb_entry(parent, struct page, rb_page_cache);
+
+		if (offset < page->offset)
+			p = &(*p)->rb_left;
+		else if (offset > page->offset)
+			p = &(*p)->rb_right;
+		else
+			return page;
+	}
+
+	rb_link_node(node, parent, p);
+
+	return NULL;
+}
+
+static inline struct page * rb_insert_page_cache(struct inode * inode,
+						 unsigned long offset,
+						 struct rb_node * node)
+{
+	struct page * ret;
+	if ((ret = __rb_insert_page_cache(inode, offset, node)))
+		goto out;
+	rb_insert_color(node, &inode->i_rb_page_cache);
+ out:
+	return ret;
+}
+-----------------------------------------------------------------------
+*/
+
+#ifndef	_LINUX_RBTREE_H
+#define	_LINUX_RBTREE_H
+
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+
+struct rb_node
+{
+	unsigned long  rb_parent_color;
+#define	RB_RED		0
+#define	RB_BLACK	1
+	struct rb_node *rb_right;
+	struct rb_node *rb_left;
+} __attribute__((aligned(sizeof(long))));
+    /* The alignment might seem pointless, but allegedly CRIS needs it */
+
+struct rb_root
+{
+	struct rb_node *rb_node;
+};
+
+
+#define rb_parent(r)   ((struct rb_node *)((r)->rb_parent_color & ~3))
+#define rb_color(r)   ((r)->rb_parent_color & 1)
+#define rb_is_red(r)   (!rb_color(r))
+#define rb_is_black(r) rb_color(r)
+#define rb_set_red(r)  do { (r)->rb_parent_color &= ~1; } while (0)
+#define rb_set_black(r)  do { (r)->rb_parent_color |= 1; } while (0)
+
+static inline void rb_set_parent(struct rb_node *rb, struct rb_node *p)
+{
+	rb->rb_parent_color = (rb->rb_parent_color & 3) | (unsigned long)p;
+}
+static inline void rb_set_color(struct rb_node *rb, int color)
+{
+	rb->rb_parent_color = (rb->rb_parent_color & ~1) | color;
+}
+
+#define RB_ROOT	(struct rb_root) { NULL, }
+#define	rb_entry(ptr, type, member) container_of(ptr, type, member)
+
+#define RB_EMPTY_ROOT(root)	((root)->rb_node == NULL)
+#define RB_EMPTY_NODE(node)	(rb_parent(node) == node)
+#define RB_CLEAR_NODE(node)	(rb_set_parent(node, node))
+
+static inline void rb_init_node(struct rb_node *rb)
+{
+	rb->rb_parent_color = 0;
+	rb->rb_right = NULL;
+	rb->rb_left = NULL;
+	RB_CLEAR_NODE(rb);
+}
+
+extern void rb_insert_color(struct rb_node *, struct rb_root *);
+extern void rb_erase(struct rb_node *, struct rb_root *);
+
+typedef void (*rb_augment_f)(struct rb_node *node, void *data);
+
+extern void rb_augment_insert(struct rb_node *node,
+			      rb_augment_f func, void *data);
+extern struct rb_node *rb_augment_erase_begin(struct rb_node *node);
+extern void rb_augment_erase_end(struct rb_node *node,
+				 rb_augment_f func, void *data);
+
+/* Find logical next and previous nodes in a tree */
+extern struct rb_node *rb_next(const struct rb_node *);
+extern struct rb_node *rb_prev(const struct rb_node *);
+extern struct rb_node *rb_first(const struct rb_root *);
+extern struct rb_node *rb_last(const struct rb_root *);
+
+/* Fast replacement of a single node without remove/rebalance/add/rebalance */
+extern void rb_replace_node(struct rb_node *victim, struct rb_node *new, 
+			    struct rb_root *root);
+
+static inline void rb_link_node(struct rb_node * node, struct rb_node * parent,
+				struct rb_node ** rb_link)
+{
+	node->rb_parent_color = (unsigned long )parent;
+	node->rb_left = node->rb_right = NULL;
+
+	*rb_link = node;
+}
+
+#endif	/* _LINUX_RBTREE_H */
diff --git a/include/linux/rculist.h b/include/linux/rculist.h
new file mode 100644
index 00000000..d0792908
--- /dev/null
+++ b/include/linux/rculist.h
@@ -0,0 +1,493 @@
+#ifndef _LINUX_RCULIST_H
+#define _LINUX_RCULIST_H
+
+#ifdef __KERNEL__
+
+/*
+ * RCU-protected list version
+ */
+#include <linux/list.h>
+#include <linux/rcupdate.h>
+
+/*
+ * Why is there no list_empty_rcu()?  Because list_empty() serves this
+ * purpose.  The list_empty() function fetches the RCU-protected pointer
+ * and compares it to the address of the list head, but neither dereferences
+ * this pointer itself nor provides this pointer to the caller.  Therefore,
+ * it is not necessary to use rcu_dereference(), so that list_empty() can
+ * be used anywhere you would want to use a list_empty_rcu().
+ */
+
+/*
+ * return the ->next pointer of a list_head in an rcu safe
+ * way, we must not access it directly
+ */
+#define list_next_rcu(list)	(*((struct list_head __rcu **)(&(list)->next)))
+
+/*
+ * Insert a new entry between two known consecutive entries.
+ *
+ * This is only for internal list manipulation where we know
+ * the prev/next entries already!
+ */
+static inline void __list_add_rcu(struct list_head *new,
+		struct list_head *prev, struct list_head *next)
+{
+	new->next = next;
+	new->prev = prev;
+	rcu_assign_pointer(list_next_rcu(prev), new);
+	next->prev = new;
+}
+
+/**
+ * list_add_rcu - add a new entry to rcu-protected list
+ * @new: new entry to be added
+ * @head: list head to add it after
+ *
+ * Insert a new entry after the specified head.
+ * This is good for implementing stacks.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as list_add_rcu()
+ * or list_del_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * list_for_each_entry_rcu().
+ */
+static inline void list_add_rcu(struct list_head *new, struct list_head *head)
+{
+	__list_add_rcu(new, head, head->next);
+}
+
+/**
+ * list_add_tail_rcu - add a new entry to rcu-protected list
+ * @new: new entry to be added
+ * @head: list head to add it before
+ *
+ * Insert a new entry before the specified head.
+ * This is useful for implementing queues.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as list_add_tail_rcu()
+ * or list_del_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * list_for_each_entry_rcu().
+ */
+static inline void list_add_tail_rcu(struct list_head *new,
+					struct list_head *head)
+{
+	__list_add_rcu(new, head->prev, head);
+}
+
+/**
+ * list_del_rcu - deletes entry from list without re-initialization
+ * @entry: the element to delete from the list.
+ *
+ * Note: list_empty() on entry does not return true after this,
+ * the entry is in an undefined state. It is useful for RCU based
+ * lockfree traversal.
+ *
+ * In particular, it means that we can not poison the forward
+ * pointers that may still be used for walking the list.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as list_del_rcu()
+ * or list_add_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * list_for_each_entry_rcu().
+ *
+ * Note that the caller is not permitted to immediately free
+ * the newly deleted entry.  Instead, either synchronize_rcu()
+ * or call_rcu() must be used to defer freeing until an RCU
+ * grace period has elapsed.
+ */
+static inline void list_del_rcu(struct list_head *entry)
+{
+	__list_del(entry->prev, entry->next);
+	entry->prev = LIST_POISON2;
+}
+
+/**
+ * hlist_del_init_rcu - deletes entry from hash list with re-initialization
+ * @n: the element to delete from the hash list.
+ *
+ * Note: list_unhashed() on the node return true after this. It is
+ * useful for RCU based read lockfree traversal if the writer side
+ * must know if the list entry is still hashed or already unhashed.
+ *
+ * In particular, it means that we can not poison the forward pointers
+ * that may still be used for walking the hash list and we can only
+ * zero the pprev pointer so list_unhashed() will return true after
+ * this.
+ *
+ * The caller must take whatever precautions are necessary (such as
+ * holding appropriate locks) to avoid racing with another
+ * list-mutation primitive, such as hlist_add_head_rcu() or
+ * hlist_del_rcu(), running on this same list.  However, it is
+ * perfectly legal to run concurrently with the _rcu list-traversal
+ * primitives, such as hlist_for_each_entry_rcu().
+ */
+static inline void hlist_del_init_rcu(struct hlist_node *n)
+{
+	if (!hlist_unhashed(n)) {
+		__hlist_del(n);
+		n->pprev = NULL;
+	}
+}
+
+/**
+ * list_replace_rcu - replace old entry by new one
+ * @old : the element to be replaced
+ * @new : the new element to insert
+ *
+ * The @old entry will be replaced with the @new entry atomically.
+ * Note: @old should not be empty.
+ */
+static inline void list_replace_rcu(struct list_head *old,
+				struct list_head *new)
+{
+	new->next = old->next;
+	new->prev = old->prev;
+	rcu_assign_pointer(list_next_rcu(new->prev), new);
+	new->next->prev = new;
+	old->prev = LIST_POISON2;
+}
+
+/**
+ * list_splice_init_rcu - splice an RCU-protected list into an existing list.
+ * @list:	the RCU-protected list to splice
+ * @head:	the place in the list to splice the first list into
+ * @sync:	function to sync: synchronize_rcu(), synchronize_sched(), ...
+ *
+ * @head can be RCU-read traversed concurrently with this function.
+ *
+ * Note that this function blocks.
+ *
+ * Important note: the caller must take whatever action is necessary to
+ *	prevent any other updates to @head.  In principle, it is possible
+ *	to modify the list as soon as sync() begins execution.
+ *	If this sort of thing becomes necessary, an alternative version
+ *	based on call_rcu() could be created.  But only if -really-
+ *	needed -- there is no shortage of RCU API members.
+ */
+static inline void list_splice_init_rcu(struct list_head *list,
+					struct list_head *head,
+					void (*sync)(void))
+{
+	struct list_head *first = list->next;
+	struct list_head *last = list->prev;
+	struct list_head *at = head->next;
+
+	if (list_empty(list))
+		return;
+
+	/* "first" and "last" tracking list, so initialize it. */
+
+	INIT_LIST_HEAD(list);
+
+	/*
+	 * At this point, the list body still points to the source list.
+	 * Wait for any readers to finish using the list before splicing
+	 * the list body into the new list.  Any new readers will see
+	 * an empty list.
+	 */
+
+	sync();
+
+	/*
+	 * Readers are finished with the source list, so perform splice.
+	 * The order is important if the new list is global and accessible
+	 * to concurrent RCU readers.  Note that RCU readers are not
+	 * permitted to traverse the prev pointers without excluding
+	 * this function.
+	 */
+
+	last->next = at;
+	rcu_assign_pointer(list_next_rcu(head), first);
+	first->prev = head;
+	at->prev = last;
+}
+
+/**
+ * list_entry_rcu - get the struct for this entry
+ * @ptr:        the &struct list_head pointer.
+ * @type:       the type of the struct this is embedded in.
+ * @member:     the name of the list_struct within the struct.
+ *
+ * This primitive may safely run concurrently with the _rcu list-mutation
+ * primitives such as list_add_rcu() as long as it's guarded by rcu_read_lock().
+ */
+#define list_entry_rcu(ptr, type, member) \
+	({typeof (*ptr) __rcu *__ptr = (typeof (*ptr) __rcu __force *)ptr; \
+	 container_of((typeof(ptr))rcu_dereference_raw(__ptr), type, member); \
+	})
+
+/**
+ * list_first_entry_rcu - get the first element from a list
+ * @ptr:        the list head to take the element from.
+ * @type:       the type of the struct this is embedded in.
+ * @member:     the name of the list_struct within the struct.
+ *
+ * Note, that list is expected to be not empty.
+ *
+ * This primitive may safely run concurrently with the _rcu list-mutation
+ * primitives such as list_add_rcu() as long as it's guarded by rcu_read_lock().
+ */
+#define list_first_entry_rcu(ptr, type, member) \
+	list_entry_rcu((ptr)->next, type, member)
+
+/**
+ * list_for_each_entry_rcu	-	iterate over rcu list of given type
+ * @pos:	the type * to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ *
+ * This list-traversal primitive may safely run concurrently with
+ * the _rcu list-mutation primitives such as list_add_rcu()
+ * as long as the traversal is guarded by rcu_read_lock().
+ */
+#define list_for_each_entry_rcu(pos, head, member) \
+	for (pos = list_entry_rcu((head)->next, typeof(*pos), member); \
+		&pos->member != (head); \
+		pos = list_entry_rcu(pos->member.next, typeof(*pos), member))
+
+
+/**
+ * list_for_each_continue_rcu
+ * @pos:	the &struct list_head to use as a loop cursor.
+ * @head:	the head for your list.
+ *
+ * Iterate over an rcu-protected list, continuing after current point.
+ *
+ * This list-traversal primitive may safely run concurrently with
+ * the _rcu list-mutation primitives such as list_add_rcu()
+ * as long as the traversal is guarded by rcu_read_lock().
+ */
+#define list_for_each_continue_rcu(pos, head) \
+	for ((pos) = rcu_dereference_raw(list_next_rcu(pos)); \
+		(pos) != (head); \
+		(pos) = rcu_dereference_raw(list_next_rcu(pos)))
+
+/**
+ * list_for_each_entry_continue_rcu - continue iteration over list of given type
+ * @pos:	the type * to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Continue to iterate over list of given type, continuing after
+ * the current position.
+ */
+#define list_for_each_entry_continue_rcu(pos, head, member) 		\
+	for (pos = list_entry_rcu(pos->member.next, typeof(*pos), member); \
+	     &pos->member != (head);	\
+	     pos = list_entry_rcu(pos->member.next, typeof(*pos), member))
+
+/**
+ * hlist_del_rcu - deletes entry from hash list without re-initialization
+ * @n: the element to delete from the hash list.
+ *
+ * Note: list_unhashed() on entry does not return true after this,
+ * the entry is in an undefined state. It is useful for RCU based
+ * lockfree traversal.
+ *
+ * In particular, it means that we can not poison the forward
+ * pointers that may still be used for walking the hash list.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as hlist_add_head_rcu()
+ * or hlist_del_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * hlist_for_each_entry().
+ */
+static inline void hlist_del_rcu(struct hlist_node *n)
+{
+	__hlist_del(n);
+	n->pprev = LIST_POISON2;
+}
+
+/**
+ * hlist_replace_rcu - replace old entry by new one
+ * @old : the element to be replaced
+ * @new : the new element to insert
+ *
+ * The @old entry will be replaced with the @new entry atomically.
+ */
+static inline void hlist_replace_rcu(struct hlist_node *old,
+					struct hlist_node *new)
+{
+	struct hlist_node *next = old->next;
+
+	new->next = next;
+	new->pprev = old->pprev;
+	rcu_assign_pointer(*(struct hlist_node __rcu **)new->pprev, new);
+	if (next)
+		new->next->pprev = &new->next;
+	old->pprev = LIST_POISON2;
+}
+
+/*
+ * return the first or the next element in an RCU protected hlist
+ */
+#define hlist_first_rcu(head)	(*((struct hlist_node __rcu **)(&(head)->first)))
+#define hlist_next_rcu(node)	(*((struct hlist_node __rcu **)(&(node)->next)))
+#define hlist_pprev_rcu(node)	(*((struct hlist_node __rcu **)((node)->pprev)))
+
+/**
+ * hlist_add_head_rcu
+ * @n: the element to add to the hash list.
+ * @h: the list to add to.
+ *
+ * Description:
+ * Adds the specified element to the specified hlist,
+ * while permitting racing traversals.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as hlist_add_head_rcu()
+ * or hlist_del_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * hlist_for_each_entry_rcu(), used to prevent memory-consistency
+ * problems on Alpha CPUs.  Regardless of the type of CPU, the
+ * list-traversal primitive must be guarded by rcu_read_lock().
+ */
+static inline void hlist_add_head_rcu(struct hlist_node *n,
+					struct hlist_head *h)
+{
+	struct hlist_node *first = h->first;
+
+	n->next = first;
+	n->pprev = &h->first;
+	rcu_assign_pointer(hlist_first_rcu(h), n);
+	if (first)
+		first->pprev = &n->next;
+}
+
+/**
+ * hlist_add_before_rcu
+ * @n: the new element to add to the hash list.
+ * @next: the existing element to add the new element before.
+ *
+ * Description:
+ * Adds the specified element to the specified hlist
+ * before the specified node while permitting racing traversals.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as hlist_add_head_rcu()
+ * or hlist_del_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * hlist_for_each_entry_rcu(), used to prevent memory-consistency
+ * problems on Alpha CPUs.
+ */
+static inline void hlist_add_before_rcu(struct hlist_node *n,
+					struct hlist_node *next)
+{
+	n->pprev = next->pprev;
+	n->next = next;
+	rcu_assign_pointer(hlist_pprev_rcu(n), n);
+	next->pprev = &n->next;
+}
+
+/**
+ * hlist_add_after_rcu
+ * @prev: the existing element to add the new element after.
+ * @n: the new element to add to the hash list.
+ *
+ * Description:
+ * Adds the specified element to the specified hlist
+ * after the specified node while permitting racing traversals.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as hlist_add_head_rcu()
+ * or hlist_del_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * hlist_for_each_entry_rcu(), used to prevent memory-consistency
+ * problems on Alpha CPUs.
+ */
+static inline void hlist_add_after_rcu(struct hlist_node *prev,
+				       struct hlist_node *n)
+{
+	n->next = prev->next;
+	n->pprev = &prev->next;
+	rcu_assign_pointer(hlist_next_rcu(prev), n);
+	if (n->next)
+		n->next->pprev = &n->next;
+}
+
+#define __hlist_for_each_rcu(pos, head)				\
+	for (pos = rcu_dereference(hlist_first_rcu(head));	\
+	     pos;						\
+	     pos = rcu_dereference(hlist_next_rcu(pos)))
+
+/**
+ * hlist_for_each_entry_rcu - iterate over rcu list of given type
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the hlist_node within the struct.
+ *
+ * This list-traversal primitive may safely run concurrently with
+ * the _rcu list-mutation primitives such as hlist_add_head_rcu()
+ * as long as the traversal is guarded by rcu_read_lock().
+ */
+#define hlist_for_each_entry_rcu(tpos, pos, head, member)		\
+	for (pos = rcu_dereference_raw(hlist_first_rcu(head));		\
+		pos &&							 \
+		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; }); \
+		pos = rcu_dereference_raw(hlist_next_rcu(pos)))
+
+/**
+ * hlist_for_each_entry_rcu_bh - iterate over rcu list of given type
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the hlist_node within the struct.
+ *
+ * This list-traversal primitive may safely run concurrently with
+ * the _rcu list-mutation primitives such as hlist_add_head_rcu()
+ * as long as the traversal is guarded by rcu_read_lock().
+ */
+#define hlist_for_each_entry_rcu_bh(tpos, pos, head, member)		 \
+	for (pos = rcu_dereference_bh((head)->first);			 \
+		pos &&							 \
+		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; }); \
+		pos = rcu_dereference_bh(pos->next))
+
+/**
+ * hlist_for_each_entry_continue_rcu - iterate over a hlist continuing after current point
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
+ * @member:	the name of the hlist_node within the struct.
+ */
+#define hlist_for_each_entry_continue_rcu(tpos, pos, member)		\
+	for (pos = rcu_dereference((pos)->next);			\
+	     pos &&							\
+	     ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; });  \
+	     pos = rcu_dereference(pos->next))
+
+/**
+ * hlist_for_each_entry_continue_rcu_bh - iterate over a hlist continuing after current point
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
+ * @member:	the name of the hlist_node within the struct.
+ */
+#define hlist_for_each_entry_continue_rcu_bh(tpos, pos, member)		\
+	for (pos = rcu_dereference_bh((pos)->next);			\
+	     pos &&							\
+	     ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; });  \
+	     pos = rcu_dereference_bh(pos->next))
+
+
+#endif	/* __KERNEL__ */
+#endif
diff --git a/include/linux/rculist_bl.h b/include/linux/rculist_bl.h
new file mode 100644
index 00000000..cf1244fb
--- /dev/null
+++ b/include/linux/rculist_bl.h
@@ -0,0 +1,128 @@
+#ifndef _LINUX_RCULIST_BL_H
+#define _LINUX_RCULIST_BL_H
+
+/*
+ * RCU-protected bl list version. See include/linux/list_bl.h.
+ */
+#include <linux/list_bl.h>
+#include <linux/rcupdate.h>
+
+static inline void hlist_bl_set_first_rcu(struct hlist_bl_head *h,
+					struct hlist_bl_node *n)
+{
+	LIST_BL_BUG_ON((unsigned long)n & LIST_BL_LOCKMASK);
+	LIST_BL_BUG_ON(((unsigned long)h->first & LIST_BL_LOCKMASK) !=
+							LIST_BL_LOCKMASK);
+	rcu_assign_pointer(h->first,
+		(struct hlist_bl_node *)((unsigned long)n | LIST_BL_LOCKMASK));
+}
+
+static inline struct hlist_bl_node *hlist_bl_first_rcu(struct hlist_bl_head *h)
+{
+	return (struct hlist_bl_node *)
+		((unsigned long)rcu_dereference(h->first) & ~LIST_BL_LOCKMASK);
+}
+
+/**
+ * hlist_bl_del_init_rcu - deletes entry from hash list with re-initialization
+ * @n: the element to delete from the hash list.
+ *
+ * Note: hlist_bl_unhashed() on the node returns true after this. It is
+ * useful for RCU based read lockfree traversal if the writer side
+ * must know if the list entry is still hashed or already unhashed.
+ *
+ * In particular, it means that we can not poison the forward pointers
+ * that may still be used for walking the hash list and we can only
+ * zero the pprev pointer so list_unhashed() will return true after
+ * this.
+ *
+ * The caller must take whatever precautions are necessary (such as
+ * holding appropriate locks) to avoid racing with another
+ * list-mutation primitive, such as hlist_bl_add_head_rcu() or
+ * hlist_bl_del_rcu(), running on this same list.  However, it is
+ * perfectly legal to run concurrently with the _rcu list-traversal
+ * primitives, such as hlist_bl_for_each_entry_rcu().
+ */
+static inline void hlist_bl_del_init_rcu(struct hlist_bl_node *n)
+{
+	if (!hlist_bl_unhashed(n)) {
+		__hlist_bl_del(n);
+		n->pprev = NULL;
+	}
+}
+
+/**
+ * hlist_bl_del_rcu - deletes entry from hash list without re-initialization
+ * @n: the element to delete from the hash list.
+ *
+ * Note: hlist_bl_unhashed() on entry does not return true after this,
+ * the entry is in an undefined state. It is useful for RCU based
+ * lockfree traversal.
+ *
+ * In particular, it means that we can not poison the forward
+ * pointers that may still be used for walking the hash list.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as hlist_bl_add_head_rcu()
+ * or hlist_bl_del_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * hlist_bl_for_each_entry().
+ */
+static inline void hlist_bl_del_rcu(struct hlist_bl_node *n)
+{
+	__hlist_bl_del(n);
+	n->pprev = LIST_POISON2;
+}
+
+/**
+ * hlist_bl_add_head_rcu
+ * @n: the element to add to the hash list.
+ * @h: the list to add to.
+ *
+ * Description:
+ * Adds the specified element to the specified hlist_bl,
+ * while permitting racing traversals.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as hlist_bl_add_head_rcu()
+ * or hlist_bl_del_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * hlist_bl_for_each_entry_rcu(), used to prevent memory-consistency
+ * problems on Alpha CPUs.  Regardless of the type of CPU, the
+ * list-traversal primitive must be guarded by rcu_read_lock().
+ */
+static inline void hlist_bl_add_head_rcu(struct hlist_bl_node *n,
+					struct hlist_bl_head *h)
+{
+	struct hlist_bl_node *first;
+
+	/* don't need hlist_bl_first_rcu because we're under lock */
+	first = hlist_bl_first(h);
+
+	n->next = first;
+	if (first)
+		first->pprev = &n->next;
+	n->pprev = &h->first;
+
+	/* need _rcu because we can have concurrent lock free readers */
+	hlist_bl_set_first_rcu(h, n);
+}
+/**
+ * hlist_bl_for_each_entry_rcu - iterate over rcu list of given type
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_bl_node to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the hlist_bl_node within the struct.
+ *
+ */
+#define hlist_bl_for_each_entry_rcu(tpos, pos, head, member)		\
+	for (pos = hlist_bl_first_rcu(head);				\
+		pos &&							\
+		({ tpos = hlist_bl_entry(pos, typeof(*tpos), member); 1; }); \
+		pos = rcu_dereference_raw(pos->next))
+
+#endif
diff --git a/include/linux/rculist_nulls.h b/include/linux/rculist_nulls.h
new file mode 100644
index 00000000..2ae13714
--- /dev/null
+++ b/include/linux/rculist_nulls.h
@@ -0,0 +1,116 @@
+#ifndef _LINUX_RCULIST_NULLS_H
+#define _LINUX_RCULIST_NULLS_H
+
+#ifdef __KERNEL__
+
+/*
+ * RCU-protected list version
+ */
+#include <linux/list_nulls.h>
+#include <linux/rcupdate.h>
+
+/**
+ * hlist_nulls_del_init_rcu - deletes entry from hash list with re-initialization
+ * @n: the element to delete from the hash list.
+ *
+ * Note: hlist_nulls_unhashed() on the node return true after this. It is
+ * useful for RCU based read lockfree traversal if the writer side
+ * must know if the list entry is still hashed or already unhashed.
+ *
+ * In particular, it means that we can not poison the forward pointers
+ * that may still be used for walking the hash list and we can only
+ * zero the pprev pointer so list_unhashed() will return true after
+ * this.
+ *
+ * The caller must take whatever precautions are necessary (such as
+ * holding appropriate locks) to avoid racing with another
+ * list-mutation primitive, such as hlist_nulls_add_head_rcu() or
+ * hlist_nulls_del_rcu(), running on this same list.  However, it is
+ * perfectly legal to run concurrently with the _rcu list-traversal
+ * primitives, such as hlist_nulls_for_each_entry_rcu().
+ */
+static inline void hlist_nulls_del_init_rcu(struct hlist_nulls_node *n)
+{
+	if (!hlist_nulls_unhashed(n)) {
+		__hlist_nulls_del(n);
+		n->pprev = NULL;
+	}
+}
+
+#define hlist_nulls_first_rcu(head) \
+	(*((struct hlist_nulls_node __rcu __force **)&(head)->first))
+
+#define hlist_nulls_next_rcu(node) \
+	(*((struct hlist_nulls_node __rcu __force **)&(node)->next))
+
+/**
+ * hlist_nulls_del_rcu - deletes entry from hash list without re-initialization
+ * @n: the element to delete from the hash list.
+ *
+ * Note: hlist_nulls_unhashed() on entry does not return true after this,
+ * the entry is in an undefined state. It is useful for RCU based
+ * lockfree traversal.
+ *
+ * In particular, it means that we can not poison the forward
+ * pointers that may still be used for walking the hash list.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as hlist_nulls_add_head_rcu()
+ * or hlist_nulls_del_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * hlist_nulls_for_each_entry().
+ */
+static inline void hlist_nulls_del_rcu(struct hlist_nulls_node *n)
+{
+	__hlist_nulls_del(n);
+	n->pprev = LIST_POISON2;
+}
+
+/**
+ * hlist_nulls_add_head_rcu
+ * @n: the element to add to the hash list.
+ * @h: the list to add to.
+ *
+ * Description:
+ * Adds the specified element to the specified hlist_nulls,
+ * while permitting racing traversals.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as hlist_nulls_add_head_rcu()
+ * or hlist_nulls_del_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * hlist_nulls_for_each_entry_rcu(), used to prevent memory-consistency
+ * problems on Alpha CPUs.  Regardless of the type of CPU, the
+ * list-traversal primitive must be guarded by rcu_read_lock().
+ */
+static inline void hlist_nulls_add_head_rcu(struct hlist_nulls_node *n,
+					struct hlist_nulls_head *h)
+{
+	struct hlist_nulls_node *first = h->first;
+
+	n->next = first;
+	n->pprev = &h->first;
+	rcu_assign_pointer(hlist_nulls_first_rcu(h), n);
+	if (!is_a_nulls(first))
+		first->pprev = &n->next;
+}
+/**
+ * hlist_nulls_for_each_entry_rcu - iterate over rcu list of given type
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_nulls_node to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the hlist_nulls_node within the struct.
+ *
+ */
+#define hlist_nulls_for_each_entry_rcu(tpos, pos, head, member)			\
+	for (pos = rcu_dereference_raw(hlist_nulls_first_rcu(head));		\
+		(!is_a_nulls(pos)) &&						\
+		({ tpos = hlist_nulls_entry(pos, typeof(*tpos), member); 1; }); \
+		pos = rcu_dereference_raw(hlist_nulls_next_rcu(pos)))
+
+#endif
+#endif
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
new file mode 100644
index 00000000..20fb776a
--- /dev/null
+++ b/include/linux/rcupdate.h
@@ -0,0 +1,951 @@
+/*
+ * Read-Copy Update mechanism for mutual exclusion
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright IBM Corporation, 2001
+ *
+ * Author: Dipankar Sarma <dipankar@in.ibm.com>
+ *
+ * Based on the original work by Paul McKenney <paulmck@us.ibm.com>
+ * and inputs from Rusty Russell, Andrea Arcangeli and Andi Kleen.
+ * Papers:
+ * http://www.rdrop.com/users/paulmck/paper/rclockpdcsproof.pdf
+ * http://lse.sourceforge.net/locking/rclock_OLS.2001.05.01c.sc.pdf (OLS2001)
+ *
+ * For detailed explanation of Read-Copy Update mechanism see -
+ *		http://lse.sourceforge.net/locking/rcupdate.html
+ *
+ */
+
+#ifndef __LINUX_RCUPDATE_H
+#define __LINUX_RCUPDATE_H
+
+#include <linux/types.h>
+#include <linux/cache.h>
+#include <linux/spinlock.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/seqlock.h>
+#include <linux/lockdep.h>
+#include <linux/completion.h>
+#include <linux/debugobjects.h>
+#include <linux/bug.h>
+#include <linux/compiler.h>
+
+#ifdef CONFIG_RCU_TORTURE_TEST
+extern int rcutorture_runnable; /* for sysctl */
+#endif /* #ifdef CONFIG_RCU_TORTURE_TEST */
+
+#if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU)
+extern void rcutorture_record_test_transition(void);
+extern void rcutorture_record_progress(unsigned long vernum);
+extern void do_trace_rcu_torture_read(char *rcutorturename,
+				      struct rcu_head *rhp);
+#else
+static inline void rcutorture_record_test_transition(void)
+{
+}
+static inline void rcutorture_record_progress(unsigned long vernum)
+{
+}
+#ifdef CONFIG_RCU_TRACE
+extern void do_trace_rcu_torture_read(char *rcutorturename,
+				      struct rcu_head *rhp);
+#else
+#define do_trace_rcu_torture_read(rcutorturename, rhp) do { } while (0)
+#endif
+#endif
+
+#define UINT_CMP_GE(a, b)	(UINT_MAX / 2 >= (a) - (b))
+#define UINT_CMP_LT(a, b)	(UINT_MAX / 2 < (a) - (b))
+#define ULONG_CMP_GE(a, b)	(ULONG_MAX / 2 >= (a) - (b))
+#define ULONG_CMP_LT(a, b)	(ULONG_MAX / 2 < (a) - (b))
+
+/* Exported common interfaces */
+
+#ifdef CONFIG_PREEMPT_RCU
+
+/**
+ * call_rcu() - Queue an RCU callback for invocation after a grace period.
+ * @head: structure to be used for queueing the RCU updates.
+ * @func: actual callback function to be invoked after the grace period
+ *
+ * The callback function will be invoked some time after a full grace
+ * period elapses, in other words after all pre-existing RCU read-side
+ * critical sections have completed.  However, the callback function
+ * might well execute concurrently with RCU read-side critical sections
+ * that started after call_rcu() was invoked.  RCU read-side critical
+ * sections are delimited by rcu_read_lock() and rcu_read_unlock(),
+ * and may be nested.
+ */
+extern void call_rcu(struct rcu_head *head,
+			      void (*func)(struct rcu_head *head));
+
+#else /* #ifdef CONFIG_PREEMPT_RCU */
+
+/* In classic RCU, call_rcu() is just call_rcu_sched(). */
+#define	call_rcu	call_rcu_sched
+
+#endif /* #else #ifdef CONFIG_PREEMPT_RCU */
+
+/**
+ * call_rcu_bh() - Queue an RCU for invocation after a quicker grace period.
+ * @head: structure to be used for queueing the RCU updates.
+ * @func: actual callback function to be invoked after the grace period
+ *
+ * The callback function will be invoked some time after a full grace
+ * period elapses, in other words after all currently executing RCU
+ * read-side critical sections have completed. call_rcu_bh() assumes
+ * that the read-side critical sections end on completion of a softirq
+ * handler. This means that read-side critical sections in process
+ * context must not be interrupted by softirqs. This interface is to be
+ * used when most of the read-side critical sections are in softirq context.
+ * RCU read-side critical sections are delimited by :
+ *  - rcu_read_lock() and  rcu_read_unlock(), if in interrupt context.
+ *  OR
+ *  - rcu_read_lock_bh() and rcu_read_unlock_bh(), if in process context.
+ *  These may be nested.
+ */
+extern void call_rcu_bh(struct rcu_head *head,
+			void (*func)(struct rcu_head *head));
+
+/**
+ * call_rcu_sched() - Queue an RCU for invocation after sched grace period.
+ * @head: structure to be used for queueing the RCU updates.
+ * @func: actual callback function to be invoked after the grace period
+ *
+ * The callback function will be invoked some time after a full grace
+ * period elapses, in other words after all currently executing RCU
+ * read-side critical sections have completed. call_rcu_sched() assumes
+ * that the read-side critical sections end on enabling of preemption
+ * or on voluntary preemption.
+ * RCU read-side critical sections are delimited by :
+ *  - rcu_read_lock_sched() and  rcu_read_unlock_sched(),
+ *  OR
+ *  anything that disables preemption.
+ *  These may be nested.
+ */
+extern void call_rcu_sched(struct rcu_head *head,
+			   void (*func)(struct rcu_head *rcu));
+
+extern void synchronize_sched(void);
+
+#ifdef CONFIG_PREEMPT_RCU
+
+extern void __rcu_read_lock(void);
+extern void __rcu_read_unlock(void);
+void synchronize_rcu(void);
+
+/*
+ * Defined as a macro as it is a very low level header included from
+ * areas that don't even know about current.  This gives the rcu_read_lock()
+ * nesting depth, but makes sense only if CONFIG_PREEMPT_RCU -- in other
+ * types of kernel builds, the rcu_read_lock() nesting depth is unknowable.
+ */
+#define rcu_preempt_depth() (current->rcu_read_lock_nesting)
+
+#else /* #ifdef CONFIG_PREEMPT_RCU */
+
+static inline void __rcu_read_lock(void)
+{
+	preempt_disable();
+}
+
+static inline void __rcu_read_unlock(void)
+{
+	preempt_enable();
+}
+
+static inline void synchronize_rcu(void)
+{
+	synchronize_sched();
+}
+
+static inline int rcu_preempt_depth(void)
+{
+	return 0;
+}
+
+#endif /* #else #ifdef CONFIG_PREEMPT_RCU */
+
+/* Internal to kernel */
+extern void rcu_sched_qs(int cpu);
+extern void rcu_bh_qs(int cpu);
+extern void rcu_check_callbacks(int cpu, int user);
+struct notifier_block;
+extern void rcu_idle_enter(void);
+extern void rcu_idle_exit(void);
+extern void rcu_irq_enter(void);
+extern void rcu_irq_exit(void);
+
+/**
+ * RCU_NONIDLE - Indicate idle-loop code that needs RCU readers
+ * @a: Code that RCU needs to pay attention to.
+ *
+ * RCU, RCU-bh, and RCU-sched read-side critical sections are forbidden
+ * in the inner idle loop, that is, between the rcu_idle_enter() and
+ * the rcu_idle_exit() -- RCU will happily ignore any such read-side
+ * critical sections.  However, things like powertop need tracepoints
+ * in the inner idle loop.
+ *
+ * This macro provides the way out:  RCU_NONIDLE(do_something_with_RCU())
+ * will tell RCU that it needs to pay attending, invoke its argument
+ * (in this example, a call to the do_something_with_RCU() function),
+ * and then tell RCU to go back to ignoring this CPU.  It is permissible
+ * to nest RCU_NONIDLE() wrappers, but the nesting level is currently
+ * quite limited.  If deeper nesting is required, it will be necessary
+ * to adjust DYNTICK_TASK_NESTING_VALUE accordingly.
+ *
+ * This macro may be used from process-level code only.
+ */
+#define RCU_NONIDLE(a) \
+	do { \
+		rcu_idle_exit(); \
+		do { a; } while (0); \
+		rcu_idle_enter(); \
+	} while (0)
+
+/*
+ * Infrastructure to implement the synchronize_() primitives in
+ * TREE_RCU and rcu_barrier_() primitives in TINY_RCU.
+ */
+
+typedef void call_rcu_func_t(struct rcu_head *head,
+			     void (*func)(struct rcu_head *head));
+void wait_rcu_gp(call_rcu_func_t crf);
+
+#if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU)
+#include <linux/rcutree.h>
+#elif defined(CONFIG_TINY_RCU) || defined(CONFIG_TINY_PREEMPT_RCU)
+#include <linux/rcutiny.h>
+#else
+#error "Unknown RCU implementation specified to kernel configuration"
+#endif
+
+/*
+ * init_rcu_head_on_stack()/destroy_rcu_head_on_stack() are needed for dynamic
+ * initialization and destruction of rcu_head on the stack. rcu_head structures
+ * allocated dynamically in the heap or defined statically don't need any
+ * initialization.
+ */
+#ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD
+extern void init_rcu_head_on_stack(struct rcu_head *head);
+extern void destroy_rcu_head_on_stack(struct rcu_head *head);
+#else /* !CONFIG_DEBUG_OBJECTS_RCU_HEAD */
+static inline void init_rcu_head_on_stack(struct rcu_head *head)
+{
+}
+
+static inline void destroy_rcu_head_on_stack(struct rcu_head *head)
+{
+}
+#endif	/* #else !CONFIG_DEBUG_OBJECTS_RCU_HEAD */
+
+#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PROVE_RCU)
+bool rcu_lockdep_current_cpu_online(void);
+#else /* #if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PROVE_RCU) */
+static inline bool rcu_lockdep_current_cpu_online(void)
+{
+	return 1;
+}
+#endif /* #else #if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PROVE_RCU) */
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+
+#ifdef CONFIG_PROVE_RCU
+extern int rcu_is_cpu_idle(void);
+#else /* !CONFIG_PROVE_RCU */
+static inline int rcu_is_cpu_idle(void)
+{
+	return 0;
+}
+#endif /* else !CONFIG_PROVE_RCU */
+
+static inline void rcu_lock_acquire(struct lockdep_map *map)
+{
+	lock_acquire(map, 0, 0, 2, 1, NULL, _THIS_IP_);
+}
+
+static inline void rcu_lock_release(struct lockdep_map *map)
+{
+	lock_release(map, 1, _THIS_IP_);
+}
+
+extern struct lockdep_map rcu_lock_map;
+extern struct lockdep_map rcu_bh_lock_map;
+extern struct lockdep_map rcu_sched_lock_map;
+extern int debug_lockdep_rcu_enabled(void);
+
+/**
+ * rcu_read_lock_held() - might we be in RCU read-side critical section?
+ *
+ * If CONFIG_DEBUG_LOCK_ALLOC is selected, returns nonzero iff in an RCU
+ * read-side critical section.  In absence of CONFIG_DEBUG_LOCK_ALLOC,
+ * this assumes we are in an RCU read-side critical section unless it can
+ * prove otherwise.  This is useful for debug checks in functions that
+ * require that they be called within an RCU read-side critical section.
+ *
+ * Checks debug_lockdep_rcu_enabled() to prevent false positives during boot
+ * and while lockdep is disabled.
+ *
+ * Note that rcu_read_lock() and the matching rcu_read_unlock() must
+ * occur in the same context, for example, it is illegal to invoke
+ * rcu_read_unlock() in process context if the matching rcu_read_lock()
+ * was invoked from within an irq handler.
+ *
+ * Note that rcu_read_lock() is disallowed if the CPU is either idle or
+ * offline from an RCU perspective, so check for those as well.
+ */
+static inline int rcu_read_lock_held(void)
+{
+	if (!debug_lockdep_rcu_enabled())
+		return 1;
+	if (rcu_is_cpu_idle())
+		return 0;
+	if (!rcu_lockdep_current_cpu_online())
+		return 0;
+	return lock_is_held(&rcu_lock_map);
+}
+
+/*
+ * rcu_read_lock_bh_held() is defined out of line to avoid #include-file
+ * hell.
+ */
+extern int rcu_read_lock_bh_held(void);
+
+/**
+ * rcu_read_lock_sched_held() - might we be in RCU-sched read-side critical section?
+ *
+ * If CONFIG_DEBUG_LOCK_ALLOC is selected, returns nonzero iff in an
+ * RCU-sched read-side critical section.  In absence of
+ * CONFIG_DEBUG_LOCK_ALLOC, this assumes we are in an RCU-sched read-side
+ * critical section unless it can prove otherwise.  Note that disabling
+ * of preemption (including disabling irqs) counts as an RCU-sched
+ * read-side critical section.  This is useful for debug checks in functions
+ * that required that they be called within an RCU-sched read-side
+ * critical section.
+ *
+ * Check debug_lockdep_rcu_enabled() to prevent false positives during boot
+ * and while lockdep is disabled.
+ *
+ * Note that if the CPU is in the idle loop from an RCU point of
+ * view (ie: that we are in the section between rcu_idle_enter() and
+ * rcu_idle_exit()) then rcu_read_lock_held() returns false even if the CPU
+ * did an rcu_read_lock().  The reason for this is that RCU ignores CPUs
+ * that are in such a section, considering these as in extended quiescent
+ * state, so such a CPU is effectively never in an RCU read-side critical
+ * section regardless of what RCU primitives it invokes.  This state of
+ * affairs is required --- we need to keep an RCU-free window in idle
+ * where the CPU may possibly enter into low power mode. This way we can
+ * notice an extended quiescent state to other CPUs that started a grace
+ * period. Otherwise we would delay any grace period as long as we run in
+ * the idle task.
+ *
+ * Similarly, we avoid claiming an SRCU read lock held if the current
+ * CPU is offline.
+ */
+#ifdef CONFIG_PREEMPT_COUNT
+static inline int rcu_read_lock_sched_held(void)
+{
+	int lockdep_opinion = 0;
+
+	if (!debug_lockdep_rcu_enabled())
+		return 1;
+	if (rcu_is_cpu_idle())
+		return 0;
+	if (!rcu_lockdep_current_cpu_online())
+		return 0;
+	if (debug_locks)
+		lockdep_opinion = lock_is_held(&rcu_sched_lock_map);
+	return lockdep_opinion || preempt_count() != 0 || irqs_disabled();
+}
+#else /* #ifdef CONFIG_PREEMPT_COUNT */
+static inline int rcu_read_lock_sched_held(void)
+{
+	return 1;
+}
+#endif /* #else #ifdef CONFIG_PREEMPT_COUNT */
+
+#else /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
+
+# define rcu_lock_acquire(a)		do { } while (0)
+# define rcu_lock_release(a)		do { } while (0)
+
+static inline int rcu_read_lock_held(void)
+{
+	return 1;
+}
+
+static inline int rcu_read_lock_bh_held(void)
+{
+	return 1;
+}
+
+#ifdef CONFIG_PREEMPT_COUNT
+static inline int rcu_read_lock_sched_held(void)
+{
+	return preempt_count() != 0 || irqs_disabled();
+}
+#else /* #ifdef CONFIG_PREEMPT_COUNT */
+static inline int rcu_read_lock_sched_held(void)
+{
+	return 1;
+}
+#endif /* #else #ifdef CONFIG_PREEMPT_COUNT */
+
+#endif /* #else #ifdef CONFIG_DEBUG_LOCK_ALLOC */
+
+#ifdef CONFIG_PROVE_RCU
+
+extern int rcu_my_thread_group_empty(void);
+
+/**
+ * rcu_lockdep_assert - emit lockdep splat if specified condition not met
+ * @c: condition to check
+ * @s: informative message
+ */
+#define rcu_lockdep_assert(c, s)					\
+	do {								\
+		static bool __section(.data.unlikely) __warned;		\
+		if (debug_lockdep_rcu_enabled() && !__warned && !(c)) {	\
+			__warned = true;				\
+			lockdep_rcu_suspicious(__FILE__, __LINE__, s);	\
+		}							\
+	} while (0)
+
+#if defined(CONFIG_PROVE_RCU) && !defined(CONFIG_PREEMPT_RCU)
+static inline void rcu_preempt_sleep_check(void)
+{
+	rcu_lockdep_assert(!lock_is_held(&rcu_lock_map),
+			   "Illegal context switch in RCU read-side "
+			   "critical section");
+}
+#else /* #ifdef CONFIG_PROVE_RCU */
+static inline void rcu_preempt_sleep_check(void)
+{
+}
+#endif /* #else #ifdef CONFIG_PROVE_RCU */
+
+#define rcu_sleep_check()						\
+	do {								\
+		rcu_preempt_sleep_check();				\
+		rcu_lockdep_assert(!lock_is_held(&rcu_bh_lock_map),	\
+				   "Illegal context switch in RCU-bh"	\
+				   " read-side critical section");	\
+		rcu_lockdep_assert(!lock_is_held(&rcu_sched_lock_map),	\
+				   "Illegal context switch in RCU-sched"\
+				   " read-side critical section");	\
+	} while (0)
+
+#else /* #ifdef CONFIG_PROVE_RCU */
+
+#define rcu_lockdep_assert(c, s) do { } while (0)
+#define rcu_sleep_check() do { } while (0)
+
+#endif /* #else #ifdef CONFIG_PROVE_RCU */
+
+/*
+ * Helper functions for rcu_dereference_check(), rcu_dereference_protected()
+ * and rcu_assign_pointer().  Some of these could be folded into their
+ * callers, but they are left separate in order to ease introduction of
+ * multiple flavors of pointers to match the multiple flavors of RCU
+ * (e.g., __rcu_bh, * __rcu_sched, and __srcu), should this make sense in
+ * the future.
+ */
+
+#ifdef __CHECKER__
+#define rcu_dereference_sparse(p, space) \
+	((void)(((typeof(*p) space *)p) == p))
+#else /* #ifdef __CHECKER__ */
+#define rcu_dereference_sparse(p, space)
+#endif /* #else #ifdef __CHECKER__ */
+
+#define __rcu_access_pointer(p, space) \
+	({ \
+		typeof(*p) *_________p1 = (typeof(*p)*__force )ACCESS_ONCE(p); \
+		rcu_dereference_sparse(p, space); \
+		((typeof(*p) __force __kernel *)(_________p1)); \
+	})
+#define __rcu_dereference_check(p, c, space) \
+	({ \
+		typeof(*p) *_________p1 = (typeof(*p)*__force )ACCESS_ONCE(p); \
+		rcu_lockdep_assert(c, "suspicious rcu_dereference_check()" \
+				      " usage"); \
+		rcu_dereference_sparse(p, space); \
+		smp_read_barrier_depends(); \
+		((typeof(*p) __force __kernel *)(_________p1)); \
+	})
+#define __rcu_dereference_protected(p, c, space) \
+	({ \
+		rcu_lockdep_assert(c, "suspicious rcu_dereference_protected()" \
+				      " usage"); \
+		rcu_dereference_sparse(p, space); \
+		((typeof(*p) __force __kernel *)(p)); \
+	})
+
+#define __rcu_access_index(p, space) \
+	({ \
+		typeof(p) _________p1 = ACCESS_ONCE(p); \
+		rcu_dereference_sparse(p, space); \
+		(_________p1); \
+	})
+#define __rcu_dereference_index_check(p, c) \
+	({ \
+		typeof(p) _________p1 = ACCESS_ONCE(p); \
+		rcu_lockdep_assert(c, \
+				   "suspicious rcu_dereference_index_check()" \
+				   " usage"); \
+		smp_read_barrier_depends(); \
+		(_________p1); \
+	})
+#define __rcu_assign_pointer(p, v, space) \
+	({ \
+		smp_wmb(); \
+		(p) = (typeof(*v) __force space *)(v); \
+	})
+
+
+/**
+ * rcu_access_pointer() - fetch RCU pointer with no dereferencing
+ * @p: The pointer to read
+ *
+ * Return the value of the specified RCU-protected pointer, but omit the
+ * smp_read_barrier_depends() and keep the ACCESS_ONCE().  This is useful
+ * when the value of this pointer is accessed, but the pointer is not
+ * dereferenced, for example, when testing an RCU-protected pointer against
+ * NULL.  Although rcu_access_pointer() may also be used in cases where
+ * update-side locks prevent the value of the pointer from changing, you
+ * should instead use rcu_dereference_protected() for this use case.
+ *
+ * It is also permissible to use rcu_access_pointer() when read-side
+ * access to the pointer was removed at least one grace period ago, as
+ * is the case in the context of the RCU callback that is freeing up
+ * the data, or after a synchronize_rcu() returns.  This can be useful
+ * when tearing down multi-linked structures after a grace period
+ * has elapsed.
+ */
+#define rcu_access_pointer(p) __rcu_access_pointer((p), __rcu)
+
+/**
+ * rcu_dereference_check() - rcu_dereference with debug checking
+ * @p: The pointer to read, prior to dereferencing
+ * @c: The conditions under which the dereference will take place
+ *
+ * Do an rcu_dereference(), but check that the conditions under which the
+ * dereference will take place are correct.  Typically the conditions
+ * indicate the various locking conditions that should be held at that
+ * point.  The check should return true if the conditions are satisfied.
+ * An implicit check for being in an RCU read-side critical section
+ * (rcu_read_lock()) is included.
+ *
+ * For example:
+ *
+ *	bar = rcu_dereference_check(foo->bar, lockdep_is_held(&foo->lock));
+ *
+ * could be used to indicate to lockdep that foo->bar may only be dereferenced
+ * if either rcu_read_lock() is held, or that the lock required to replace
+ * the bar struct at foo->bar is held.
+ *
+ * Note that the list of conditions may also include indications of when a lock
+ * need not be held, for example during initialisation or destruction of the
+ * target struct:
+ *
+ *	bar = rcu_dereference_check(foo->bar, lockdep_is_held(&foo->lock) ||
+ *					      atomic_read(&foo->usage) == 0);
+ *
+ * Inserts memory barriers on architectures that require them
+ * (currently only the Alpha), prevents the compiler from refetching
+ * (and from merging fetches), and, more importantly, documents exactly
+ * which pointers are protected by RCU and checks that the pointer is
+ * annotated as __rcu.
+ */
+#define rcu_dereference_check(p, c) \
+	__rcu_dereference_check((p), rcu_read_lock_held() || (c), __rcu)
+
+/**
+ * rcu_dereference_bh_check() - rcu_dereference_bh with debug checking
+ * @p: The pointer to read, prior to dereferencing
+ * @c: The conditions under which the dereference will take place
+ *
+ * This is the RCU-bh counterpart to rcu_dereference_check().
+ */
+#define rcu_dereference_bh_check(p, c) \
+	__rcu_dereference_check((p), rcu_read_lock_bh_held() || (c), __rcu)
+
+/**
+ * rcu_dereference_sched_check() - rcu_dereference_sched with debug checking
+ * @p: The pointer to read, prior to dereferencing
+ * @c: The conditions under which the dereference will take place
+ *
+ * This is the RCU-sched counterpart to rcu_dereference_check().
+ */
+#define rcu_dereference_sched_check(p, c) \
+	__rcu_dereference_check((p), rcu_read_lock_sched_held() || (c), \
+				__rcu)
+
+#define rcu_dereference_raw(p) rcu_dereference_check(p, 1) /*@@@ needed? @@@*/
+
+/**
+ * rcu_access_index() - fetch RCU index with no dereferencing
+ * @p: The index to read
+ *
+ * Return the value of the specified RCU-protected index, but omit the
+ * smp_read_barrier_depends() and keep the ACCESS_ONCE().  This is useful
+ * when the value of this index is accessed, but the index is not
+ * dereferenced, for example, when testing an RCU-protected index against
+ * -1.  Although rcu_access_index() may also be used in cases where
+ * update-side locks prevent the value of the index from changing, you
+ * should instead use rcu_dereference_index_protected() for this use case.
+ */
+#define rcu_access_index(p) __rcu_access_index((p), __rcu)
+
+/**
+ * rcu_dereference_index_check() - rcu_dereference for indices with debug checking
+ * @p: The pointer to read, prior to dereferencing
+ * @c: The conditions under which the dereference will take place
+ *
+ * Similar to rcu_dereference_check(), but omits the sparse checking.
+ * This allows rcu_dereference_index_check() to be used on integers,
+ * which can then be used as array indices.  Attempting to use
+ * rcu_dereference_check() on an integer will give compiler warnings
+ * because the sparse address-space mechanism relies on dereferencing
+ * the RCU-protected pointer.  Dereferencing integers is not something
+ * that even gcc will put up with.
+ *
+ * Note that this function does not implicitly check for RCU read-side
+ * critical sections.  If this function gains lots of uses, it might
+ * make sense to provide versions for each flavor of RCU, but it does
+ * not make sense as of early 2010.
+ */
+#define rcu_dereference_index_check(p, c) \
+	__rcu_dereference_index_check((p), (c))
+
+/**
+ * rcu_dereference_protected() - fetch RCU pointer when updates prevented
+ * @p: The pointer to read, prior to dereferencing
+ * @c: The conditions under which the dereference will take place
+ *
+ * Return the value of the specified RCU-protected pointer, but omit
+ * both the smp_read_barrier_depends() and the ACCESS_ONCE().  This
+ * is useful in cases where update-side locks prevent the value of the
+ * pointer from changing.  Please note that this primitive does -not-
+ * prevent the compiler from repeating this reference or combining it
+ * with other references, so it should not be used without protection
+ * of appropriate locks.
+ *
+ * This function is only for update-side use.  Using this function
+ * when protected only by rcu_read_lock() will result in infrequent
+ * but very ugly failures.
+ */
+#define rcu_dereference_protected(p, c) \
+	__rcu_dereference_protected((p), (c), __rcu)
+
+
+/**
+ * rcu_dereference() - fetch RCU-protected pointer for dereferencing
+ * @p: The pointer to read, prior to dereferencing
+ *
+ * This is a simple wrapper around rcu_dereference_check().
+ */
+#define rcu_dereference(p) rcu_dereference_check(p, 0)
+
+/**
+ * rcu_dereference_bh() - fetch an RCU-bh-protected pointer for dereferencing
+ * @p: The pointer to read, prior to dereferencing
+ *
+ * Makes rcu_dereference_check() do the dirty work.
+ */
+#define rcu_dereference_bh(p) rcu_dereference_bh_check(p, 0)
+
+/**
+ * rcu_dereference_sched() - fetch RCU-sched-protected pointer for dereferencing
+ * @p: The pointer to read, prior to dereferencing
+ *
+ * Makes rcu_dereference_check() do the dirty work.
+ */
+#define rcu_dereference_sched(p) rcu_dereference_sched_check(p, 0)
+
+/**
+ * rcu_read_lock() - mark the beginning of an RCU read-side critical section
+ *
+ * When synchronize_rcu() is invoked on one CPU while other CPUs
+ * are within RCU read-side critical sections, then the
+ * synchronize_rcu() is guaranteed to block until after all the other
+ * CPUs exit their critical sections.  Similarly, if call_rcu() is invoked
+ * on one CPU while other CPUs are within RCU read-side critical
+ * sections, invocation of the corresponding RCU callback is deferred
+ * until after the all the other CPUs exit their critical sections.
+ *
+ * Note, however, that RCU callbacks are permitted to run concurrently
+ * with new RCU read-side critical sections.  One way that this can happen
+ * is via the following sequence of events: (1) CPU 0 enters an RCU
+ * read-side critical section, (2) CPU 1 invokes call_rcu() to register
+ * an RCU callback, (3) CPU 0 exits the RCU read-side critical section,
+ * (4) CPU 2 enters a RCU read-side critical section, (5) the RCU
+ * callback is invoked.  This is legal, because the RCU read-side critical
+ * section that was running concurrently with the call_rcu() (and which
+ * therefore might be referencing something that the corresponding RCU
+ * callback would free up) has completed before the corresponding
+ * RCU callback is invoked.
+ *
+ * RCU read-side critical sections may be nested.  Any deferred actions
+ * will be deferred until the outermost RCU read-side critical section
+ * completes.
+ *
+ * You can avoid reading and understanding the next paragraph by
+ * following this rule: don't put anything in an rcu_read_lock() RCU
+ * read-side critical section that would block in a !PREEMPT kernel.
+ * But if you want the full story, read on!
+ *
+ * In non-preemptible RCU implementations (TREE_RCU and TINY_RCU), it
+ * is illegal to block while in an RCU read-side critical section.  In
+ * preemptible RCU implementations (TREE_PREEMPT_RCU and TINY_PREEMPT_RCU)
+ * in CONFIG_PREEMPT kernel builds, RCU read-side critical sections may
+ * be preempted, but explicit blocking is illegal.  Finally, in preemptible
+ * RCU implementations in real-time (CONFIG_PREEMPT_RT) kernel builds,
+ * RCU read-side critical sections may be preempted and they may also
+ * block, but only when acquiring spinlocks that are subject to priority
+ * inheritance.
+ */
+static inline void rcu_read_lock(void)
+{
+	__rcu_read_lock();
+	__acquire(RCU);
+	rcu_lock_acquire(&rcu_lock_map);
+	rcu_lockdep_assert(!rcu_is_cpu_idle(),
+			   "rcu_read_lock() used illegally while idle");
+}
+
+/*
+ * So where is rcu_write_lock()?  It does not exist, as there is no
+ * way for writers to lock out RCU readers.  This is a feature, not
+ * a bug -- this property is what provides RCU's performance benefits.
+ * Of course, writers must coordinate with each other.  The normal
+ * spinlock primitives work well for this, but any other technique may be
+ * used as well.  RCU does not care how the writers keep out of each
+ * others' way, as long as they do so.
+ */
+
+/**
+ * rcu_read_unlock() - marks the end of an RCU read-side critical section.
+ *
+ * See rcu_read_lock() for more information.
+ */
+static inline void rcu_read_unlock(void)
+{
+	rcu_lockdep_assert(!rcu_is_cpu_idle(),
+			   "rcu_read_unlock() used illegally while idle");
+	rcu_lock_release(&rcu_lock_map);
+	__release(RCU);
+	__rcu_read_unlock();
+}
+
+/**
+ * rcu_read_lock_bh() - mark the beginning of an RCU-bh critical section
+ *
+ * This is equivalent of rcu_read_lock(), but to be used when updates
+ * are being done using call_rcu_bh() or synchronize_rcu_bh(). Since
+ * both call_rcu_bh() and synchronize_rcu_bh() consider completion of a
+ * softirq handler to be a quiescent state, a process in RCU read-side
+ * critical section must be protected by disabling softirqs. Read-side
+ * critical sections in interrupt context can use just rcu_read_lock(),
+ * though this should at least be commented to avoid confusing people
+ * reading the code.
+ *
+ * Note that rcu_read_lock_bh() and the matching rcu_read_unlock_bh()
+ * must occur in the same context, for example, it is illegal to invoke
+ * rcu_read_unlock_bh() from one task if the matching rcu_read_lock_bh()
+ * was invoked from some other task.
+ */
+static inline void rcu_read_lock_bh(void)
+{
+	local_bh_disable();
+	__acquire(RCU_BH);
+	rcu_lock_acquire(&rcu_bh_lock_map);
+	rcu_lockdep_assert(!rcu_is_cpu_idle(),
+			   "rcu_read_lock_bh() used illegally while idle");
+}
+
+/*
+ * rcu_read_unlock_bh - marks the end of a softirq-only RCU critical section
+ *
+ * See rcu_read_lock_bh() for more information.
+ */
+static inline void rcu_read_unlock_bh(void)
+{
+	rcu_lockdep_assert(!rcu_is_cpu_idle(),
+			   "rcu_read_unlock_bh() used illegally while idle");
+	rcu_lock_release(&rcu_bh_lock_map);
+	__release(RCU_BH);
+	local_bh_enable();
+}
+
+/**
+ * rcu_read_lock_sched() - mark the beginning of a RCU-sched critical section
+ *
+ * This is equivalent of rcu_read_lock(), but to be used when updates
+ * are being done using call_rcu_sched() or synchronize_rcu_sched().
+ * Read-side critical sections can also be introduced by anything that
+ * disables preemption, including local_irq_disable() and friends.
+ *
+ * Note that rcu_read_lock_sched() and the matching rcu_read_unlock_sched()
+ * must occur in the same context, for example, it is illegal to invoke
+ * rcu_read_unlock_sched() from process context if the matching
+ * rcu_read_lock_sched() was invoked from an NMI handler.
+ */
+static inline void rcu_read_lock_sched(void)
+{
+	preempt_disable();
+	__acquire(RCU_SCHED);
+	rcu_lock_acquire(&rcu_sched_lock_map);
+	rcu_lockdep_assert(!rcu_is_cpu_idle(),
+			   "rcu_read_lock_sched() used illegally while idle");
+}
+
+/* Used by lockdep and tracing: cannot be traced, cannot call lockdep. */
+static inline notrace void rcu_read_lock_sched_notrace(void)
+{
+	preempt_disable_notrace();
+	__acquire(RCU_SCHED);
+}
+
+/*
+ * rcu_read_unlock_sched - marks the end of a RCU-classic critical section
+ *
+ * See rcu_read_lock_sched for more information.
+ */
+static inline void rcu_read_unlock_sched(void)
+{
+	rcu_lockdep_assert(!rcu_is_cpu_idle(),
+			   "rcu_read_unlock_sched() used illegally while idle");
+	rcu_lock_release(&rcu_sched_lock_map);
+	__release(RCU_SCHED);
+	preempt_enable();
+}
+
+/* Used by lockdep and tracing: cannot be traced, cannot call lockdep. */
+static inline notrace void rcu_read_unlock_sched_notrace(void)
+{
+	__release(RCU_SCHED);
+	preempt_enable_notrace();
+}
+
+/**
+ * rcu_assign_pointer() - assign to RCU-protected pointer
+ * @p: pointer to assign to
+ * @v: value to assign (publish)
+ *
+ * Assigns the specified value to the specified RCU-protected
+ * pointer, ensuring that any concurrent RCU readers will see
+ * any prior initialization.  Returns the value assigned.
+ *
+ * Inserts memory barriers on architectures that require them
+ * (which is most of them), and also prevents the compiler from
+ * reordering the code that initializes the structure after the pointer
+ * assignment.  More importantly, this call documents which pointers
+ * will be dereferenced by RCU read-side code.
+ *
+ * In some special cases, you may use RCU_INIT_POINTER() instead
+ * of rcu_assign_pointer().  RCU_INIT_POINTER() is a bit faster due
+ * to the fact that it does not constrain either the CPU or the compiler.
+ * That said, using RCU_INIT_POINTER() when you should have used
+ * rcu_assign_pointer() is a very bad thing that results in
+ * impossible-to-diagnose memory corruption.  So please be careful.
+ * See the RCU_INIT_POINTER() comment header for details.
+ */
+#define rcu_assign_pointer(p, v) \
+	__rcu_assign_pointer((p), (v), __rcu)
+
+/**
+ * RCU_INIT_POINTER() - initialize an RCU protected pointer
+ *
+ * Initialize an RCU-protected pointer in special cases where readers
+ * do not need ordering constraints on the CPU or the compiler.  These
+ * special cases are:
+ *
+ * 1.	This use of RCU_INIT_POINTER() is NULLing out the pointer -or-
+ * 2.	The caller has taken whatever steps are required to prevent
+ *	RCU readers from concurrently accessing this pointer -or-
+ * 3.	The referenced data structure has already been exposed to
+ *	readers either at compile time or via rcu_assign_pointer() -and-
+ *	a.	You have not made -any- reader-visible changes to
+ *		this structure since then -or-
+ *	b.	It is OK for readers accessing this structure from its
+ *		new location to see the old state of the structure.  (For
+ *		example, the changes were to statistical counters or to
+ *		other state where exact synchronization is not required.)
+ *
+ * Failure to follow these rules governing use of RCU_INIT_POINTER() will
+ * result in impossible-to-diagnose memory corruption.  As in the structures
+ * will look OK in crash dumps, but any concurrent RCU readers might
+ * see pre-initialized values of the referenced data structure.  So
+ * please be very careful how you use RCU_INIT_POINTER()!!!
+ *
+ * If you are creating an RCU-protected linked structure that is accessed
+ * by a single external-to-structure RCU-protected pointer, then you may
+ * use RCU_INIT_POINTER() to initialize the internal RCU-protected
+ * pointers, but you must use rcu_assign_pointer() to initialize the
+ * external-to-structure pointer -after- you have completely initialized
+ * the reader-accessible portions of the linked structure.
+ */
+#define RCU_INIT_POINTER(p, v) \
+		p = (typeof(*v) __force __rcu *)(v)
+
+static __always_inline bool __is_kfree_rcu_offset(unsigned long offset)
+{
+	return offset < 4096;
+}
+
+static __always_inline
+void __kfree_rcu(struct rcu_head *head, unsigned long offset)
+{
+	typedef void (*rcu_callback)(struct rcu_head *);
+
+	BUILD_BUG_ON(!__builtin_constant_p(offset));
+
+	/* See the kfree_rcu() header comment. */
+	BUILD_BUG_ON(!__is_kfree_rcu_offset(offset));
+
+	kfree_call_rcu(head, (rcu_callback)offset);
+}
+
+/**
+ * kfree_rcu() - kfree an object after a grace period.
+ * @ptr:	pointer to kfree
+ * @rcu_head:	the name of the struct rcu_head within the type of @ptr.
+ *
+ * Many rcu callbacks functions just call kfree() on the base structure.
+ * These functions are trivial, but their size adds up, and furthermore
+ * when they are used in a kernel module, that module must invoke the
+ * high-latency rcu_barrier() function at module-unload time.
+ *
+ * The kfree_rcu() function handles this issue.  Rather than encoding a
+ * function address in the embedded rcu_head structure, kfree_rcu() instead
+ * encodes the offset of the rcu_head structure within the base structure.
+ * Because the functions are not allowed in the low-order 4096 bytes of
+ * kernel virtual memory, offsets up to 4095 bytes can be accommodated.
+ * If the offset is larger than 4095 bytes, a compile-time error will
+ * be generated in __kfree_rcu().  If this error is triggered, you can
+ * either fall back to use of call_rcu() or rearrange the structure to
+ * position the rcu_head structure into the first 4096 bytes.
+ *
+ * Note that the allowable offset might decrease in the future, for example,
+ * to allow something like kmem_cache_free_rcu().
+ */
+#define kfree_rcu(ptr, rcu_head)					\
+	__kfree_rcu(&((ptr)->rcu_head), offsetof(typeof(*(ptr)), rcu_head))
+
+#endif /* __LINUX_RCUPDATE_H */
diff --git a/include/linux/rcutiny.h b/include/linux/rcutiny.h
new file mode 100644
index 00000000..e93df771
--- /dev/null
+++ b/include/linux/rcutiny.h
@@ -0,0 +1,171 @@
+/*
+ * Read-Copy Update mechanism for mutual exclusion, the Bloatwatch edition.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright IBM Corporation, 2008
+ *
+ * Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+ *
+ * For detailed explanation of Read-Copy Update mechanism see -
+ *		Documentation/RCU
+ */
+#ifndef __LINUX_TINY_H
+#define __LINUX_TINY_H
+
+#include <linux/cache.h>
+
+static inline void rcu_init(void)
+{
+}
+
+static inline void rcu_barrier_bh(void)
+{
+	wait_rcu_gp(call_rcu_bh);
+}
+
+static inline void rcu_barrier_sched(void)
+{
+	wait_rcu_gp(call_rcu_sched);
+}
+
+#ifdef CONFIG_TINY_RCU
+
+static inline void synchronize_rcu_expedited(void)
+{
+	synchronize_sched();	/* Only one CPU, so pretty fast anyway!!! */
+}
+
+static inline void rcu_barrier(void)
+{
+	rcu_barrier_sched();  /* Only one CPU, so only one list of callbacks! */
+}
+
+#else /* #ifdef CONFIG_TINY_RCU */
+
+void synchronize_rcu_expedited(void);
+
+static inline void rcu_barrier(void)
+{
+	wait_rcu_gp(call_rcu);
+}
+
+#endif /* #else #ifdef CONFIG_TINY_RCU */
+
+static inline void synchronize_rcu_bh(void)
+{
+	synchronize_sched();
+}
+
+static inline void synchronize_rcu_bh_expedited(void)
+{
+	synchronize_sched();
+}
+
+static inline void synchronize_sched_expedited(void)
+{
+	synchronize_sched();
+}
+
+static inline void kfree_call_rcu(struct rcu_head *head,
+				  void (*func)(struct rcu_head *rcu))
+{
+	call_rcu(head, func);
+}
+
+#ifdef CONFIG_TINY_RCU
+
+static inline void rcu_preempt_note_context_switch(void)
+{
+}
+
+static inline void exit_rcu(void)
+{
+}
+
+static inline int rcu_needs_cpu(int cpu)
+{
+	return 0;
+}
+
+#else /* #ifdef CONFIG_TINY_RCU */
+
+void rcu_preempt_note_context_switch(void);
+extern void exit_rcu(void);
+int rcu_preempt_needs_cpu(void);
+
+static inline int rcu_needs_cpu(int cpu)
+{
+	return rcu_preempt_needs_cpu();
+}
+
+#endif /* #else #ifdef CONFIG_TINY_RCU */
+
+static inline void rcu_note_context_switch(int cpu)
+{
+	rcu_sched_qs(cpu);
+	rcu_preempt_note_context_switch();
+}
+
+/*
+ * Take advantage of the fact that there is only one CPU, which
+ * allows us to ignore virtualization-based context switches.
+ */
+static inline void rcu_virt_note_context_switch(int cpu)
+{
+}
+
+/*
+ * Return the number of grace periods.
+ */
+static inline long rcu_batches_completed(void)
+{
+	return 0;
+}
+
+/*
+ * Return the number of bottom-half grace periods.
+ */
+static inline long rcu_batches_completed_bh(void)
+{
+	return 0;
+}
+
+static inline void rcu_force_quiescent_state(void)
+{
+}
+
+static inline void rcu_bh_force_quiescent_state(void)
+{
+}
+
+static inline void rcu_sched_force_quiescent_state(void)
+{
+}
+
+static inline void rcu_cpu_stall_reset(void)
+{
+}
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+extern int rcu_scheduler_active __read_mostly;
+extern void rcu_scheduler_starting(void);
+#else /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
+static inline void rcu_scheduler_starting(void)
+{
+}
+#endif /* #else #ifdef CONFIG_DEBUG_LOCK_ALLOC */
+
+#endif /* __LINUX_RCUTINY_H */
diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h
new file mode 100644
index 00000000..e8ee5dd0
--- /dev/null
+++ b/include/linux/rcutree.h
@@ -0,0 +1,111 @@
+/*
+ * Read-Copy Update mechanism for mutual exclusion (tree-based version)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright IBM Corporation, 2008
+ *
+ * Author: Dipankar Sarma <dipankar@in.ibm.com>
+ *	   Paul E. McKenney <paulmck@linux.vnet.ibm.com> Hierarchical algorithm
+ *
+ * Based on the original work by Paul McKenney <paulmck@us.ibm.com>
+ * and inputs from Rusty Russell, Andrea Arcangeli and Andi Kleen.
+ *
+ * For detailed explanation of Read-Copy Update mechanism see -
+ *	Documentation/RCU
+ */
+
+#ifndef __LINUX_RCUTREE_H
+#define __LINUX_RCUTREE_H
+
+extern void rcu_init(void);
+extern void rcu_note_context_switch(int cpu);
+extern int rcu_needs_cpu(int cpu);
+extern void rcu_cpu_stall_reset(void);
+
+/*
+ * Note a virtualization-based context switch.  This is simply a
+ * wrapper around rcu_note_context_switch(), which allows TINY_RCU
+ * to save a few bytes.
+ */
+static inline void rcu_virt_note_context_switch(int cpu)
+{
+	rcu_note_context_switch(cpu);
+}
+
+#ifdef CONFIG_TREE_PREEMPT_RCU
+
+extern void exit_rcu(void);
+
+#else /* #ifdef CONFIG_TREE_PREEMPT_RCU */
+
+static inline void exit_rcu(void)
+{
+}
+
+#endif /* #else #ifdef CONFIG_TREE_PREEMPT_RCU */
+
+extern void synchronize_rcu_bh(void);
+extern void synchronize_sched_expedited(void);
+extern void synchronize_rcu_expedited(void);
+
+void kfree_call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu));
+
+/**
+ * synchronize_rcu_bh_expedited - Brute-force RCU-bh grace period
+ *
+ * Wait for an RCU-bh grace period to elapse, but use a "big hammer"
+ * approach to force the grace period to end quickly.  This consumes
+ * significant time on all CPUs and is unfriendly to real-time workloads,
+ * so is thus not recommended for any sort of common-case code.  In fact,
+ * if you are using synchronize_rcu_bh_expedited() in a loop, please
+ * restructure your code to batch your updates, and then use a single
+ * synchronize_rcu_bh() instead.
+ *
+ * Note that it is illegal to call this function while holding any lock
+ * that is acquired by a CPU-hotplug notifier.  And yes, it is also illegal
+ * to call this function from a CPU-hotplug notifier.  Failing to observe
+ * these restriction will result in deadlock.
+ */
+static inline void synchronize_rcu_bh_expedited(void)
+{
+	synchronize_sched_expedited();
+}
+
+extern void rcu_barrier(void);
+extern void rcu_barrier_bh(void);
+extern void rcu_barrier_sched(void);
+
+extern unsigned long rcutorture_testseq;
+extern unsigned long rcutorture_vernum;
+extern long rcu_batches_completed(void);
+extern long rcu_batches_completed_bh(void);
+extern long rcu_batches_completed_sched(void);
+
+extern void rcu_force_quiescent_state(void);
+extern void rcu_bh_force_quiescent_state(void);
+extern void rcu_sched_force_quiescent_state(void);
+
+/* A context switch is a grace period for RCU-sched and RCU-bh. */
+static inline int rcu_blocking_is_gp(void)
+{
+	might_sleep();  /* Check for RCU read-side critical section. */
+	return num_online_cpus() == 1;
+}
+
+extern void rcu_scheduler_starting(void);
+extern int rcu_scheduler_active __read_mostly;
+
+#endif /* __LINUX_RCUTREE_H */
diff --git a/include/linux/rds.h b/include/linux/rds.h
new file mode 100644
index 00000000..91950950
--- /dev/null
+++ b/include/linux/rds.h
@@ -0,0 +1,285 @@
+/*
+ * Copyright (c) 2008 Oracle.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#ifndef _LINUX_RDS_H
+#define _LINUX_RDS_H
+
+#include <linux/types.h>
+
+#define RDS_IB_ABI_VERSION		0x301
+
+/*
+ * setsockopt/getsockopt for SOL_RDS
+ */
+#define RDS_CANCEL_SENT_TO      	1
+#define RDS_GET_MR			2
+#define RDS_FREE_MR			3
+/* deprecated: RDS_BARRIER 4 */
+#define RDS_RECVERR			5
+#define RDS_CONG_MONITOR		6
+#define RDS_GET_MR_FOR_DEST		7
+
+/*
+ * Control message types for SOL_RDS.
+ *
+ * CMSG_RDMA_ARGS (sendmsg)
+ *	Request a RDMA transfer to/from the specified
+ *	memory ranges.
+ *	The cmsg_data is a struct rds_rdma_args.
+ * RDS_CMSG_RDMA_DEST (recvmsg, sendmsg)
+ *	Kernel informs application about intended
+ *	source/destination of a RDMA transfer
+ * RDS_CMSG_RDMA_MAP (sendmsg)
+ *	Application asks kernel to map the given
+ *	memory range into a IB MR, and send the
+ *	R_Key along in an RDS extension header.
+ *	The cmsg_data is a struct rds_get_mr_args,
+ *	the same as for the GET_MR setsockopt.
+ * RDS_CMSG_RDMA_STATUS (recvmsg)
+ *	Returns the status of a completed RDMA operation.
+ */
+#define RDS_CMSG_RDMA_ARGS		1
+#define RDS_CMSG_RDMA_DEST		2
+#define RDS_CMSG_RDMA_MAP		3
+#define RDS_CMSG_RDMA_STATUS		4
+#define RDS_CMSG_CONG_UPDATE		5
+#define RDS_CMSG_ATOMIC_FADD		6
+#define RDS_CMSG_ATOMIC_CSWP		7
+#define RDS_CMSG_MASKED_ATOMIC_FADD	8
+#define RDS_CMSG_MASKED_ATOMIC_CSWP	9
+
+#define RDS_INFO_FIRST			10000
+#define RDS_INFO_COUNTERS		10000
+#define RDS_INFO_CONNECTIONS		10001
+/* 10002 aka RDS_INFO_FLOWS is deprecated */
+#define RDS_INFO_SEND_MESSAGES		10003
+#define RDS_INFO_RETRANS_MESSAGES       10004
+#define RDS_INFO_RECV_MESSAGES          10005
+#define RDS_INFO_SOCKETS                10006
+#define RDS_INFO_TCP_SOCKETS            10007
+#define RDS_INFO_IB_CONNECTIONS		10008
+#define RDS_INFO_CONNECTION_STATS	10009
+#define RDS_INFO_IWARP_CONNECTIONS	10010
+#define RDS_INFO_LAST			10010
+
+struct rds_info_counter {
+	uint8_t	name[32];
+	uint64_t	value;
+} __attribute__((packed));
+
+#define RDS_INFO_CONNECTION_FLAG_SENDING	0x01
+#define RDS_INFO_CONNECTION_FLAG_CONNECTING	0x02
+#define RDS_INFO_CONNECTION_FLAG_CONNECTED	0x04
+
+#define TRANSNAMSIZ	16
+
+struct rds_info_connection {
+	uint64_t	next_tx_seq;
+	uint64_t	next_rx_seq;
+	__be32		laddr;
+	__be32		faddr;
+	uint8_t	transport[TRANSNAMSIZ];		/* null term ascii */
+	uint8_t	flags;
+} __attribute__((packed));
+
+#define RDS_INFO_MESSAGE_FLAG_ACK               0x01
+#define RDS_INFO_MESSAGE_FLAG_FAST_ACK          0x02
+
+struct rds_info_message {
+	uint64_t	seq;
+	uint32_t	len;
+	__be32		laddr;
+	__be32		faddr;
+	__be16		lport;
+	__be16		fport;
+	uint8_t	flags;
+} __attribute__((packed));
+
+struct rds_info_socket {
+	uint32_t	sndbuf;
+	__be32		bound_addr;
+	__be32		connected_addr;
+	__be16		bound_port;
+	__be16		connected_port;
+	uint32_t	rcvbuf;
+	uint64_t	inum;
+} __attribute__((packed));
+
+struct rds_info_tcp_socket {
+	__be32          local_addr;
+	__be16          local_port;
+	__be32          peer_addr;
+	__be16          peer_port;
+	uint64_t       hdr_rem;
+	uint64_t       data_rem;
+	uint32_t       last_sent_nxt;
+	uint32_t       last_expected_una;
+	uint32_t       last_seen_una;
+} __attribute__((packed));
+
+#define RDS_IB_GID_LEN	16
+struct rds_info_rdma_connection {
+	__be32		src_addr;
+	__be32		dst_addr;
+	uint8_t		src_gid[RDS_IB_GID_LEN];
+	uint8_t		dst_gid[RDS_IB_GID_LEN];
+
+	uint32_t	max_send_wr;
+	uint32_t	max_recv_wr;
+	uint32_t	max_send_sge;
+	uint32_t	rdma_mr_max;
+	uint32_t	rdma_mr_size;
+};
+
+/*
+ * Congestion monitoring.
+ * Congestion control in RDS happens at the host connection
+ * level by exchanging a bitmap marking congested ports.
+ * By default, a process sleeping in poll() is always woken
+ * up when the congestion map is updated.
+ * With explicit monitoring, an application can have more
+ * fine-grained control.
+ * The application installs a 64bit mask value in the socket,
+ * where each bit corresponds to a group of ports.
+ * When a congestion update arrives, RDS checks the set of
+ * ports that are now uncongested against the list bit mask
+ * installed in the socket, and if they overlap, we queue a
+ * cong_notification on the socket.
+ *
+ * To install the congestion monitor bitmask, use RDS_CONG_MONITOR
+ * with the 64bit mask.
+ * Congestion updates are received via RDS_CMSG_CONG_UPDATE
+ * control messages.
+ *
+ * The correspondence between bits and ports is
+ *	1 << (portnum % 64)
+ */
+#define RDS_CONG_MONITOR_SIZE	64
+#define RDS_CONG_MONITOR_BIT(port)  (((unsigned int) port) % RDS_CONG_MONITOR_SIZE)
+#define RDS_CONG_MONITOR_MASK(port) (1ULL << RDS_CONG_MONITOR_BIT(port))
+
+/*
+ * RDMA related types
+ */
+
+/*
+ * This encapsulates a remote memory location.
+ * In the current implementation, it contains the R_Key
+ * of the remote memory region, and the offset into it
+ * (so that the application does not have to worry about
+ * alignment).
+ */
+typedef uint64_t	rds_rdma_cookie_t;
+
+struct rds_iovec {
+	uint64_t	addr;
+	uint64_t	bytes;
+};
+
+struct rds_get_mr_args {
+	struct rds_iovec vec;
+	uint64_t	cookie_addr;
+	uint64_t	flags;
+};
+
+struct rds_get_mr_for_dest_args {
+	struct sockaddr_storage	dest_addr;
+	struct rds_iovec 	vec;
+	uint64_t		cookie_addr;
+	uint64_t		flags;
+};
+
+struct rds_free_mr_args {
+	rds_rdma_cookie_t cookie;
+	uint64_t	flags;
+};
+
+struct rds_rdma_args {
+	rds_rdma_cookie_t cookie;
+	struct rds_iovec remote_vec;
+	uint64_t	local_vec_addr;
+	uint64_t	nr_local;
+	uint64_t	flags;
+	uint64_t	user_token;
+};
+
+struct rds_atomic_args {
+	rds_rdma_cookie_t cookie;
+	uint64_t 	local_addr;
+	uint64_t 	remote_addr;
+	union {
+		struct {
+			uint64_t	compare;
+			uint64_t	swap;
+		} cswp;
+		struct {
+			uint64_t	add;
+		} fadd;
+		struct {
+			uint64_t	compare;
+			uint64_t	swap;
+			uint64_t	compare_mask;
+			uint64_t	swap_mask;
+		} m_cswp;
+		struct {
+			uint64_t	add;
+			uint64_t	nocarry_mask;
+		} m_fadd;
+	};
+	uint64_t	flags;
+	uint64_t	user_token;
+};
+
+struct rds_rdma_notify {
+	uint64_t	user_token;
+	int32_t		status;
+};
+
+#define RDS_RDMA_SUCCESS	0
+#define RDS_RDMA_REMOTE_ERROR	1
+#define RDS_RDMA_CANCELED	2
+#define RDS_RDMA_DROPPED	3
+#define RDS_RDMA_OTHER_ERROR	4
+
+/*
+ * Common set of flags for all RDMA related structs
+ */
+#define RDS_RDMA_READWRITE	0x0001
+#define RDS_RDMA_FENCE		0x0002	/* use FENCE for immediate send */
+#define RDS_RDMA_INVALIDATE	0x0004	/* invalidate R_Key after freeing MR */
+#define RDS_RDMA_USE_ONCE	0x0008	/* free MR after use */
+#define RDS_RDMA_DONTWAIT	0x0010	/* Don't wait in SET_BARRIER */
+#define RDS_RDMA_NOTIFY_ME	0x0020	/* Notify when operation completes */
+#define RDS_RDMA_SILENT		0x0040	/* Do not interrupt remote */
+
+#endif /* IB_RDS_H */
diff --git a/include/linux/reboot.h b/include/linux/reboot.h
new file mode 100644
index 00000000..e0879a70
--- /dev/null
+++ b/include/linux/reboot.h
@@ -0,0 +1,89 @@
+#ifndef _LINUX_REBOOT_H
+#define _LINUX_REBOOT_H
+
+/*
+ * Magic values required to use _reboot() system call.
+ */
+
+#define	LINUX_REBOOT_MAGIC1	0xfee1dead
+#define	LINUX_REBOOT_MAGIC2	672274793
+#define	LINUX_REBOOT_MAGIC2A	85072278
+#define	LINUX_REBOOT_MAGIC2B	369367448
+#define	LINUX_REBOOT_MAGIC2C	537993216
+
+
+/*
+ * Commands accepted by the _reboot() system call.
+ *
+ * RESTART     Restart system using default command and mode.
+ * HALT        Stop OS and give system control to ROM monitor, if any.
+ * CAD_ON      Ctrl-Alt-Del sequence causes RESTART command.
+ * CAD_OFF     Ctrl-Alt-Del sequence sends SIGINT to init task.
+ * POWER_OFF   Stop OS and remove all power from system, if possible.
+ * RESTART2    Restart system using given command string.
+ * SW_SUSPEND  Suspend system using software suspend if compiled in.
+ * KEXEC       Restart system using a previously loaded Linux kernel
+ */
+
+#define	LINUX_REBOOT_CMD_RESTART	0x01234567
+#define	LINUX_REBOOT_CMD_HALT		0xCDEF0123
+#define	LINUX_REBOOT_CMD_CAD_ON		0x89ABCDEF
+#define	LINUX_REBOOT_CMD_CAD_OFF	0x00000000
+#define	LINUX_REBOOT_CMD_POWER_OFF	0x4321FEDC
+#define	LINUX_REBOOT_CMD_RESTART2	0xA1B2C3D4
+#define	LINUX_REBOOT_CMD_SW_SUSPEND	0xD000FCE2
+#define	LINUX_REBOOT_CMD_KEXEC		0x45584543
+
+
+#ifdef __KERNEL__
+
+#include <linux/notifier.h>
+
+#define SYS_DOWN	0x0001	/* Notify of system down */
+#define SYS_RESTART	SYS_DOWN
+#define SYS_HALT	0x0002	/* Notify of system halt */
+#define SYS_POWER_OFF	0x0003	/* Notify of system power off */
+
+extern int register_reboot_notifier(struct notifier_block *);
+extern int unregister_reboot_notifier(struct notifier_block *);
+
+
+/*
+ * Architecture-specific implementations of sys_reboot commands.
+ */
+
+extern void machine_restart(char *cmd);
+extern void machine_halt(void);
+extern void machine_power_off(void);
+
+extern void machine_shutdown(void);
+struct pt_regs;
+extern void machine_crash_shutdown(struct pt_regs *);
+
+/* 
+ * Architecture independent implemenations of sys_reboot commands.
+ */
+
+extern void kernel_restart_prepare(char *cmd);
+extern void kernel_restart(char *cmd);
+extern void kernel_halt(void);
+extern void kernel_power_off(void);
+
+extern int C_A_D; /* for sysctl */
+void ctrl_alt_del(void);
+
+#define POWEROFF_CMD_PATH_LEN	256
+extern char poweroff_cmd[POWEROFF_CMD_PATH_LEN];
+
+extern int orderly_poweroff(bool force);
+
+/*
+ * Emergency restart, callable from an interrupt handler.
+ */
+
+extern void emergency_restart(void);
+#include <asm/emergency-restart.h>
+
+#endif
+
+#endif /* _LINUX_REBOOT_H */
diff --git a/include/linux/reciprocal_div.h b/include/linux/reciprocal_div.h
new file mode 100644
index 00000000..f9c90b33
--- /dev/null
+++ b/include/linux/reciprocal_div.h
@@ -0,0 +1,32 @@
+#ifndef _LINUX_RECIPROCAL_DIV_H
+#define _LINUX_RECIPROCAL_DIV_H
+
+#include <linux/types.h>
+
+/*
+ * This file describes reciprocical division.
+ *
+ * This optimizes the (A/B) problem, when A and B are two u32
+ * and B is a known value (but not known at compile time)
+ *
+ * The math principle used is :
+ *   Let RECIPROCAL_VALUE(B) be (((1LL << 32) + (B - 1))/ B)
+ *   Then A / B = (u32)(((u64)(A) * (R)) >> 32)
+ *
+ * This replaces a divide by a multiply (and a shift), and
+ * is generally less expensive in CPU cycles.
+ */
+
+/*
+ * Computes the reciprocal value (R) for the value B of the divisor.
+ * Should not be called before each reciprocal_divide(),
+ * or else the performance is slower than a normal divide.
+ */
+extern u32 reciprocal_value(u32 B);
+
+
+static inline u32 reciprocal_divide(u32 A, u32 R)
+{
+	return (u32)(((u64)A * R) >> 32);
+}
+#endif
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
new file mode 100644
index 00000000..a90abb6b
--- /dev/null
+++ b/include/linux/regmap.h
@@ -0,0 +1,332 @@
+#ifndef __LINUX_REGMAP_H
+#define __LINUX_REGMAP_H
+
+/*
+ * Register map access API
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/list.h>
+
+struct module;
+struct device;
+struct i2c_client;
+struct spi_device;
+struct regmap;
+
+/* An enum of all the supported cache types */
+enum regcache_type {
+	REGCACHE_NONE,
+	REGCACHE_RBTREE,
+	REGCACHE_COMPRESSED
+};
+
+/**
+ * Default value for a register.  We use an array of structs rather
+ * than a simple array as many modern devices have very sparse
+ * register maps.
+ *
+ * @reg: Register address.
+ * @def: Register default value.
+ */
+struct reg_default {
+	unsigned int reg;
+	unsigned int def;
+};
+
+#ifdef CONFIG_REGMAP
+
+/**
+ * Configuration for the register map of a device.
+ *
+ * @reg_bits: Number of bits in a register address, mandatory.
+ * @pad_bits: Number of bits of padding between register and value.
+ * @val_bits: Number of bits in a register value, mandatory.
+ *
+ * @writeable_reg: Optional callback returning true if the register
+ *                 can be written to.
+ * @readable_reg: Optional callback returning true if the register
+ *                can be read from.
+ * @volatile_reg: Optional callback returning true if the register
+ *                value can't be cached.
+ * @precious_reg: Optional callback returning true if the rgister
+ *                should not be read outside of a call from the driver
+ *                (eg, a clear on read interrupt status register).
+ *
+ * @max_register: Optional, specifies the maximum valid register index.
+ * @reg_defaults: Power on reset values for registers (for use with
+ *                register cache support).
+ * @num_reg_defaults: Number of elements in reg_defaults.
+ *
+ * @read_flag_mask: Mask to be set in the top byte of the register when doing
+ *                  a read.
+ * @write_flag_mask: Mask to be set in the top byte of the register when doing
+ *                   a write. If both read_flag_mask and write_flag_mask are
+ *                   empty the regmap_bus default masks are used.
+ *
+ * @cache_type: The actual cache type.
+ * @reg_defaults_raw: Power on reset values for registers (for use with
+ *                    register cache support).
+ * @num_reg_defaults_raw: Number of elements in reg_defaults_raw.
+ */
+struct regmap_config {
+	int reg_bits;
+	int pad_bits;
+	int val_bits;
+
+	bool (*writeable_reg)(struct device *dev, unsigned int reg);
+	bool (*readable_reg)(struct device *dev, unsigned int reg);
+	bool (*volatile_reg)(struct device *dev, unsigned int reg);
+	bool (*precious_reg)(struct device *dev, unsigned int reg);
+
+	unsigned int max_register;
+	const struct reg_default *reg_defaults;
+	unsigned int num_reg_defaults;
+	enum regcache_type cache_type;
+	const void *reg_defaults_raw;
+	unsigned int num_reg_defaults_raw;
+
+	u8 read_flag_mask;
+	u8 write_flag_mask;
+};
+
+typedef int (*regmap_hw_write)(struct device *dev, const void *data,
+			       size_t count);
+typedef int (*regmap_hw_gather_write)(struct device *dev,
+				      const void *reg, size_t reg_len,
+				      const void *val, size_t val_len);
+typedef int (*regmap_hw_read)(struct device *dev,
+			      const void *reg_buf, size_t reg_size,
+			      void *val_buf, size_t val_size);
+
+/**
+ * Description of a hardware bus for the register map infrastructure.
+ *
+ * @write: Write operation.
+ * @gather_write: Write operation with split register/value, return -ENOTSUPP
+ *                if not implemented  on a given device.
+ * @read: Read operation.  Data is returned in the buffer used to transmit
+ *         data.
+ * @read_flag_mask: Mask to be set in the top byte of the register when doing
+ *                  a read.
+ */
+struct regmap_bus {
+	regmap_hw_write write;
+	regmap_hw_gather_write gather_write;
+	regmap_hw_read read;
+	u8 read_flag_mask;
+};
+
+struct regmap *regmap_init(struct device *dev,
+			   const struct regmap_bus *bus,
+			   const struct regmap_config *config);
+struct regmap *regmap_init_i2c(struct i2c_client *i2c,
+			       const struct regmap_config *config);
+struct regmap *regmap_init_spi(struct spi_device *dev,
+			       const struct regmap_config *config);
+
+struct regmap *devm_regmap_init(struct device *dev,
+				const struct regmap_bus *bus,
+				const struct regmap_config *config);
+struct regmap *devm_regmap_init_i2c(struct i2c_client *i2c,
+				    const struct regmap_config *config);
+struct regmap *devm_regmap_init_spi(struct spi_device *dev,
+				    const struct regmap_config *config);
+
+void regmap_exit(struct regmap *map);
+int regmap_reinit_cache(struct regmap *map,
+			const struct regmap_config *config);
+int regmap_write(struct regmap *map, unsigned int reg, unsigned int val);
+int regmap_raw_write(struct regmap *map, unsigned int reg,
+		     const void *val, size_t val_len);
+int regmap_bulk_write(struct regmap *map, unsigned int reg, const void *val,
+			size_t val_count);
+int regmap_read(struct regmap *map, unsigned int reg, unsigned int *val);
+int regmap_raw_read(struct regmap *map, unsigned int reg,
+		    void *val, size_t val_len);
+int regmap_bulk_read(struct regmap *map, unsigned int reg, void *val,
+		     size_t val_count);
+int regmap_update_bits(struct regmap *map, unsigned int reg,
+		       unsigned int mask, unsigned int val);
+int regmap_update_bits_check(struct regmap *map, unsigned int reg,
+			     unsigned int mask, unsigned int val,
+			     bool *change);
+int regmap_get_val_bytes(struct regmap *map);
+
+int regcache_sync(struct regmap *map);
+int regcache_sync_region(struct regmap *map, unsigned int min,
+			 unsigned int max);
+void regcache_cache_only(struct regmap *map, bool enable);
+void regcache_cache_bypass(struct regmap *map, bool enable);
+void regcache_mark_dirty(struct regmap *map);
+
+int regmap_register_patch(struct regmap *map, const struct reg_default *regs,
+			  int num_regs);
+
+/**
+ * Description of an IRQ for the generic regmap irq_chip.
+ *
+ * @reg_offset: Offset of the status/mask register within the bank
+ * @mask:       Mask used to flag/control the register.
+ */
+struct regmap_irq {
+	unsigned int reg_offset;
+	unsigned int mask;
+};
+
+/**
+ * Description of a generic regmap irq_chip.  This is not intended to
+ * handle every possible interrupt controller, but it should handle a
+ * substantial proportion of those that are found in the wild.
+ *
+ * @name:        Descriptive name for IRQ controller.
+ *
+ * @status_base: Base status register address.
+ * @mask_base:   Base mask register address.
+ * @ack_base:    Base ack address.  If zero then the chip is clear on read.
+ *
+ * @num_regs:    Number of registers in each control bank.
+ * @irqs:        Descriptors for individual IRQs.  Interrupt numbers are
+ *               assigned based on the index in the array of the interrupt.
+ * @num_irqs:    Number of descriptors.
+ */
+struct regmap_irq_chip {
+	const char *name;
+
+	unsigned int status_base;
+	unsigned int mask_base;
+	unsigned int ack_base;
+
+	int num_regs;
+
+	const struct regmap_irq *irqs;
+	int num_irqs;
+};
+
+struct regmap_irq_chip_data;
+
+int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
+			int irq_base, struct regmap_irq_chip *chip,
+			struct regmap_irq_chip_data **data);
+void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *data);
+int regmap_irq_chip_get_base(struct regmap_irq_chip_data *data);
+
+#else
+
+/*
+ * These stubs should only ever be called by generic code which has
+ * regmap based facilities, if they ever get called at runtime
+ * something is going wrong and something probably needs to select
+ * REGMAP.
+ */
+
+static inline int regmap_write(struct regmap *map, unsigned int reg,
+			       unsigned int val)
+{
+	WARN_ONCE(1, "regmap API is disabled");
+	return -EINVAL;
+}
+
+static inline int regmap_raw_write(struct regmap *map, unsigned int reg,
+				   const void *val, size_t val_len)
+{
+	WARN_ONCE(1, "regmap API is disabled");
+	return -EINVAL;
+}
+
+static inline int regmap_bulk_write(struct regmap *map, unsigned int reg,
+				    const void *val, size_t val_count)
+{
+	WARN_ONCE(1, "regmap API is disabled");
+	return -EINVAL;
+}
+
+static inline int regmap_read(struct regmap *map, unsigned int reg,
+			      unsigned int *val)
+{
+	WARN_ONCE(1, "regmap API is disabled");
+	return -EINVAL;
+}
+
+static inline int regmap_raw_read(struct regmap *map, unsigned int reg,
+				  void *val, size_t val_len)
+{
+	WARN_ONCE(1, "regmap API is disabled");
+	return -EINVAL;
+}
+
+static inline int regmap_bulk_read(struct regmap *map, unsigned int reg,
+				   void *val, size_t val_count)
+{
+	WARN_ONCE(1, "regmap API is disabled");
+	return -EINVAL;
+}
+
+static inline int regmap_update_bits(struct regmap *map, unsigned int reg,
+				     unsigned int mask, unsigned int val)
+{
+	WARN_ONCE(1, "regmap API is disabled");
+	return -EINVAL;
+}
+
+static inline int regmap_update_bits_check(struct regmap *map,
+					   unsigned int reg,
+					   unsigned int mask, unsigned int val,
+					   bool *change)
+{
+	WARN_ONCE(1, "regmap API is disabled");
+	return -EINVAL;
+}
+
+static inline int regmap_get_val_bytes(struct regmap *map)
+{
+	WARN_ONCE(1, "regmap API is disabled");
+	return -EINVAL;
+}
+
+static inline int regcache_sync(struct regmap *map)
+{
+	WARN_ONCE(1, "regmap API is disabled");
+	return -EINVAL;
+}
+
+static inline int regcache_sync_region(struct regmap *map, unsigned int min,
+				       unsigned int max)
+{
+	WARN_ONCE(1, "regmap API is disabled");
+	return -EINVAL;
+}
+
+static inline void regcache_cache_only(struct regmap *map, bool enable)
+{
+	WARN_ONCE(1, "regmap API is disabled");
+}
+
+static inline void regcache_cache_bypass(struct regmap *map, bool enable)
+{
+	WARN_ONCE(1, "regmap API is disabled");
+}
+
+static inline void regcache_mark_dirty(struct regmap *map)
+{
+	WARN_ONCE(1, "regmap API is disabled");
+}
+
+static inline int regmap_register_patch(struct regmap *map,
+					const struct reg_default *regs,
+					int num_regs)
+{
+	WARN_ONCE(1, "regmap API is disabled");
+	return -EINVAL;
+}
+
+#endif
+
+#endif
diff --git a/include/linux/regset.h b/include/linux/regset.h
new file mode 100644
index 00000000..8e0c9feb
--- /dev/null
+++ b/include/linux/regset.h
@@ -0,0 +1,375 @@
+/*
+ * User-mode machine state access
+ *
+ * Copyright (C) 2007 Red Hat, Inc.  All rights reserved.
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License v.2.
+ *
+ * Red Hat Author: Roland McGrath.
+ */
+
+#ifndef _LINUX_REGSET_H
+#define _LINUX_REGSET_H	1
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/bug.h>
+#include <linux/uaccess.h>
+struct task_struct;
+struct user_regset;
+
+
+/**
+ * user_regset_active_fn - type of @active function in &struct user_regset
+ * @target:	thread being examined
+ * @regset:	regset being examined
+ *
+ * Return -%ENODEV if not available on the hardware found.
+ * Return %0 if no interesting state in this thread.
+ * Return >%0 number of @size units of interesting state.
+ * Any get call fetching state beyond that number will
+ * see the default initialization state for this data,
+ * so a caller that knows what the default state is need
+ * not copy it all out.
+ * This call is optional; the pointer is %NULL if there
+ * is no inexpensive check to yield a value < @n.
+ */
+typedef int user_regset_active_fn(struct task_struct *target,
+				  const struct user_regset *regset);
+
+/**
+ * user_regset_get_fn - type of @get function in &struct user_regset
+ * @target:	thread being examined
+ * @regset:	regset being examined
+ * @pos:	offset into the regset data to access, in bytes
+ * @count:	amount of data to copy, in bytes
+ * @kbuf:	if not %NULL, a kernel-space pointer to copy into
+ * @ubuf:	if @kbuf is %NULL, a user-space pointer to copy into
+ *
+ * Fetch register values.  Return %0 on success; -%EIO or -%ENODEV
+ * are usual failure returns.  The @pos and @count values are in
+ * bytes, but must be properly aligned.  If @kbuf is non-null, that
+ * buffer is used and @ubuf is ignored.  If @kbuf is %NULL, then
+ * ubuf gives a userland pointer to access directly, and an -%EFAULT
+ * return value is possible.
+ */
+typedef int user_regset_get_fn(struct task_struct *target,
+			       const struct user_regset *regset,
+			       unsigned int pos, unsigned int count,
+			       void *kbuf, void __user *ubuf);
+
+/**
+ * user_regset_set_fn - type of @set function in &struct user_regset
+ * @target:	thread being examined
+ * @regset:	regset being examined
+ * @pos:	offset into the regset data to access, in bytes
+ * @count:	amount of data to copy, in bytes
+ * @kbuf:	if not %NULL, a kernel-space pointer to copy from
+ * @ubuf:	if @kbuf is %NULL, a user-space pointer to copy from
+ *
+ * Store register values.  Return %0 on success; -%EIO or -%ENODEV
+ * are usual failure returns.  The @pos and @count values are in
+ * bytes, but must be properly aligned.  If @kbuf is non-null, that
+ * buffer is used and @ubuf is ignored.  If @kbuf is %NULL, then
+ * ubuf gives a userland pointer to access directly, and an -%EFAULT
+ * return value is possible.
+ */
+typedef int user_regset_set_fn(struct task_struct *target,
+			       const struct user_regset *regset,
+			       unsigned int pos, unsigned int count,
+			       const void *kbuf, const void __user *ubuf);
+
+/**
+ * user_regset_writeback_fn - type of @writeback function in &struct user_regset
+ * @target:	thread being examined
+ * @regset:	regset being examined
+ * @immediate:	zero if writeback at completion of next context switch is OK
+ *
+ * This call is optional; usually the pointer is %NULL.  When
+ * provided, there is some user memory associated with this regset's
+ * hardware, such as memory backing cached register data on register
+ * window machines; the regset's data controls what user memory is
+ * used (e.g. via the stack pointer value).
+ *
+ * Write register data back to user memory.  If the @immediate flag
+ * is nonzero, it must be written to the user memory so uaccess or
+ * access_process_vm() can see it when this call returns; if zero,
+ * then it must be written back by the time the task completes a
+ * context switch (as synchronized with wait_task_inactive()).
+ * Return %0 on success or if there was nothing to do, -%EFAULT for
+ * a memory problem (bad stack pointer or whatever), or -%EIO for a
+ * hardware problem.
+ */
+typedef int user_regset_writeback_fn(struct task_struct *target,
+				     const struct user_regset *regset,
+				     int immediate);
+
+/**
+ * struct user_regset - accessible thread CPU state
+ * @n:			Number of slots (registers).
+ * @size:		Size in bytes of a slot (register).
+ * @align:		Required alignment, in bytes.
+ * @bias:		Bias from natural indexing.
+ * @core_note_type:	ELF note @n_type value used in core dumps.
+ * @get:		Function to fetch values.
+ * @set:		Function to store values.
+ * @active:		Function to report if regset is active, or %NULL.
+ * @writeback:		Function to write data back to user memory, or %NULL.
+ *
+ * This data structure describes a machine resource we call a register set.
+ * This is part of the state of an individual thread, not necessarily
+ * actual CPU registers per se.  A register set consists of a number of
+ * similar slots, given by @n.  Each slot is @size bytes, and aligned to
+ * @align bytes (which is at least @size).
+ *
+ * These functions must be called only on the current thread or on a
+ * thread that is in %TASK_STOPPED or %TASK_TRACED state, that we are
+ * guaranteed will not be woken up and return to user mode, and that we
+ * have called wait_task_inactive() on.  (The target thread always might
+ * wake up for SIGKILL while these functions are working, in which case
+ * that thread's user_regset state might be scrambled.)
+ *
+ * The @pos argument must be aligned according to @align; the @count
+ * argument must be a multiple of @size.  These functions are not
+ * responsible for checking for invalid arguments.
+ *
+ * When there is a natural value to use as an index, @bias gives the
+ * difference between the natural index and the slot index for the
+ * register set.  For example, x86 GDT segment descriptors form a regset;
+ * the segment selector produces a natural index, but only a subset of
+ * that index space is available as a regset (the TLS slots); subtracting
+ * @bias from a segment selector index value computes the regset slot.
+ *
+ * If nonzero, @core_note_type gives the n_type field (NT_* value)
+ * of the core file note in which this regset's data appears.
+ * NT_PRSTATUS is a special case in that the regset data starts at
+ * offsetof(struct elf_prstatus, pr_reg) into the note data; that is
+ * part of the per-machine ELF formats userland knows about.  In
+ * other cases, the core file note contains exactly the whole regset
+ * (@n * @size) and nothing else.  The core file note is normally
+ * omitted when there is an @active function and it returns zero.
+ */
+struct user_regset {
+	user_regset_get_fn		*get;
+	user_regset_set_fn		*set;
+	user_regset_active_fn		*active;
+	user_regset_writeback_fn	*writeback;
+	unsigned int			n;
+	unsigned int 			size;
+	unsigned int 			align;
+	unsigned int 			bias;
+	unsigned int 			core_note_type;
+};
+
+/**
+ * struct user_regset_view - available regsets
+ * @name:	Identifier, e.g. UTS_MACHINE string.
+ * @regsets:	Array of @n regsets available in this view.
+ * @n:		Number of elements in @regsets.
+ * @e_machine:	ELF header @e_machine %EM_* value written in core dumps.
+ * @e_flags:	ELF header @e_flags value written in core dumps.
+ * @ei_osabi:	ELF header @e_ident[%EI_OSABI] value written in core dumps.
+ *
+ * A regset view is a collection of regsets (&struct user_regset,
+ * above).  This describes all the state of a thread that can be seen
+ * from a given architecture/ABI environment.  More than one view might
+ * refer to the same &struct user_regset, or more than one regset
+ * might refer to the same machine-specific state in the thread.  For
+ * example, a 32-bit thread's state could be examined from the 32-bit
+ * view or from the 64-bit view.  Either method reaches the same thread
+ * register state, doing appropriate widening or truncation.
+ */
+struct user_regset_view {
+	const char *name;
+	const struct user_regset *regsets;
+	unsigned int n;
+	u32 e_flags;
+	u16 e_machine;
+	u8 ei_osabi;
+};
+
+/*
+ * This is documented here rather than at the definition sites because its
+ * implementation is machine-dependent but its interface is universal.
+ */
+/**
+ * task_user_regset_view - Return the process's native regset view.
+ * @tsk: a thread of the process in question
+ *
+ * Return the &struct user_regset_view that is native for the given process.
+ * For example, what it would access when it called ptrace().
+ * Throughout the life of the process, this only changes at exec.
+ */
+const struct user_regset_view *task_user_regset_view(struct task_struct *tsk);
+
+
+/*
+ * These are helpers for writing regset get/set functions in arch code.
+ * Because @start_pos and @end_pos are always compile-time constants,
+ * these are inlined into very little code though they look large.
+ *
+ * Use one or more calls sequentially for each chunk of regset data stored
+ * contiguously in memory.  Call with constants for @start_pos and @end_pos,
+ * giving the range of byte positions in the regset that data corresponds
+ * to; @end_pos can be -1 if this chunk is at the end of the regset layout.
+ * Each call updates the arguments to point past its chunk.
+ */
+
+static inline int user_regset_copyout(unsigned int *pos, unsigned int *count,
+				      void **kbuf,
+				      void __user **ubuf, const void *data,
+				      const int start_pos, const int end_pos)
+{
+	if (*count == 0)
+		return 0;
+	BUG_ON(*pos < start_pos);
+	if (end_pos < 0 || *pos < end_pos) {
+		unsigned int copy = (end_pos < 0 ? *count
+				     : min(*count, end_pos - *pos));
+		data += *pos - start_pos;
+		if (*kbuf) {
+			memcpy(*kbuf, data, copy);
+			*kbuf += copy;
+		} else if (__copy_to_user(*ubuf, data, copy))
+			return -EFAULT;
+		else
+			*ubuf += copy;
+		*pos += copy;
+		*count -= copy;
+	}
+	return 0;
+}
+
+static inline int user_regset_copyin(unsigned int *pos, unsigned int *count,
+				     const void **kbuf,
+				     const void __user **ubuf, void *data,
+				     const int start_pos, const int end_pos)
+{
+	if (*count == 0)
+		return 0;
+	BUG_ON(*pos < start_pos);
+	if (end_pos < 0 || *pos < end_pos) {
+		unsigned int copy = (end_pos < 0 ? *count
+				     : min(*count, end_pos - *pos));
+		data += *pos - start_pos;
+		if (*kbuf) {
+			memcpy(data, *kbuf, copy);
+			*kbuf += copy;
+		} else if (__copy_from_user(data, *ubuf, copy))
+			return -EFAULT;
+		else
+			*ubuf += copy;
+		*pos += copy;
+		*count -= copy;
+	}
+	return 0;
+}
+
+/*
+ * These two parallel the two above, but for portions of a regset layout
+ * that always read as all-zero or for which writes are ignored.
+ */
+static inline int user_regset_copyout_zero(unsigned int *pos,
+					   unsigned int *count,
+					   void **kbuf, void __user **ubuf,
+					   const int start_pos,
+					   const int end_pos)
+{
+	if (*count == 0)
+		return 0;
+	BUG_ON(*pos < start_pos);
+	if (end_pos < 0 || *pos < end_pos) {
+		unsigned int copy = (end_pos < 0 ? *count
+				     : min(*count, end_pos - *pos));
+		if (*kbuf) {
+			memset(*kbuf, 0, copy);
+			*kbuf += copy;
+		} else if (__clear_user(*ubuf, copy))
+			return -EFAULT;
+		else
+			*ubuf += copy;
+		*pos += copy;
+		*count -= copy;
+	}
+	return 0;
+}
+
+static inline int user_regset_copyin_ignore(unsigned int *pos,
+					    unsigned int *count,
+					    const void **kbuf,
+					    const void __user **ubuf,
+					    const int start_pos,
+					    const int end_pos)
+{
+	if (*count == 0)
+		return 0;
+	BUG_ON(*pos < start_pos);
+	if (end_pos < 0 || *pos < end_pos) {
+		unsigned int copy = (end_pos < 0 ? *count
+				     : min(*count, end_pos - *pos));
+		if (*kbuf)
+			*kbuf += copy;
+		else
+			*ubuf += copy;
+		*pos += copy;
+		*count -= copy;
+	}
+	return 0;
+}
+
+/**
+ * copy_regset_to_user - fetch a thread's user_regset data into user memory
+ * @target:	thread to be examined
+ * @view:	&struct user_regset_view describing user thread machine state
+ * @setno:	index in @view->regsets
+ * @offset:	offset into the regset data, in bytes
+ * @size:	amount of data to copy, in bytes
+ * @data:	user-mode pointer to copy into
+ */
+static inline int copy_regset_to_user(struct task_struct *target,
+				      const struct user_regset_view *view,
+				      unsigned int setno,
+				      unsigned int offset, unsigned int size,
+				      void __user *data)
+{
+	const struct user_regset *regset = &view->regsets[setno];
+
+	if (!regset->get)
+		return -EOPNOTSUPP;
+
+	if (!access_ok(VERIFY_WRITE, data, size))
+		return -EFAULT;
+
+	return regset->get(target, regset, offset, size, NULL, data);
+}
+
+/**
+ * copy_regset_from_user - store into thread's user_regset data from user memory
+ * @target:	thread to be examined
+ * @view:	&struct user_regset_view describing user thread machine state
+ * @setno:	index in @view->regsets
+ * @offset:	offset into the regset data, in bytes
+ * @size:	amount of data to copy, in bytes
+ * @data:	user-mode pointer to copy from
+ */
+static inline int copy_regset_from_user(struct task_struct *target,
+					const struct user_regset_view *view,
+					unsigned int setno,
+					unsigned int offset, unsigned int size,
+					const void __user *data)
+{
+	const struct user_regset *regset = &view->regsets[setno];
+
+	if (!regset->set)
+		return -EOPNOTSUPP;
+
+	if (!access_ok(VERIFY_READ, data, size))
+		return -EFAULT;
+
+	return regset->set(target, regset, offset, size, NULL, data);
+}
+
+
+#endif	/* <linux/regset.h> */
diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h
new file mode 100644
index 00000000..7bd73bbd
--- /dev/null
+++ b/include/linux/regulator/ab8500.h
@@ -0,0 +1,142 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
+ *          Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
+ */
+
+#ifndef __LINUX_MFD_AB8500_REGULATOR_H
+#define __LINUX_MFD_AB8500_REGULATOR_H
+
+/* AB8500 regulators */
+enum ab8500_regulator_id {
+	AB8500_LDO_AUX1,
+	AB8500_LDO_AUX2,
+	AB8500_LDO_AUX3,
+	AB8500_LDO_INTCORE,
+	AB8500_LDO_TVOUT,
+	AB8500_LDO_USB,
+	AB8500_LDO_AUDIO,
+	AB8500_LDO_ANAMIC1,
+	AB8500_LDO_ANAMIC2,
+	AB8500_LDO_DMIC,
+	AB8500_LDO_ANA,
+	AB8500_NUM_REGULATORS,
+};
+
+/* AB9450 regulators */
+enum ab9540_regulator_id {
+	AB9540_LDO_AUX1,
+	AB9540_LDO_AUX2,
+	AB9540_LDO_AUX3,
+	AB9540_LDO_AUX4,
+	AB9540_LDO_INTCORE,
+	AB9540_LDO_TVOUT,
+	AB9540_LDO_USB,
+	AB9540_LDO_AUDIO,
+	AB9540_LDO_ANAMIC1,
+	AB9540_LDO_ANAMIC2,
+	AB9540_LDO_DMIC,
+	AB9540_LDO_ANA,
+	AB9540_SYSCLKREQ_2,
+	AB9540_SYSCLKREQ_4,
+	AB9540_NUM_REGULATORS,
+};
+
+/* AB8500 and AB9540 register initialization */
+struct ab8500_regulator_reg_init {
+	int id;
+	u8 value;
+};
+
+#define INIT_REGULATOR_REGISTER(_id, _value)	\
+	{					\
+		.id = _id,			\
+		.value = _value,		\
+	}
+
+/* AB8500 registers */
+enum ab8500_regulator_reg {
+	AB8500_REGUREQUESTCTRL2,
+	AB8500_REGUREQUESTCTRL3,
+	AB8500_REGUREQUESTCTRL4,
+	AB8500_REGUSYSCLKREQ1HPVALID1,
+	AB8500_REGUSYSCLKREQ1HPVALID2,
+	AB8500_REGUHWHPREQ1VALID1,
+	AB8500_REGUHWHPREQ1VALID2,
+	AB8500_REGUHWHPREQ2VALID1,
+	AB8500_REGUHWHPREQ2VALID2,
+	AB8500_REGUSWHPREQVALID1,
+	AB8500_REGUSWHPREQVALID2,
+	AB8500_REGUSYSCLKREQVALID1,
+	AB8500_REGUSYSCLKREQVALID2,
+	AB8500_REGUMISC1,
+	AB8500_VAUDIOSUPPLY,
+	AB8500_REGUCTRL1VAMIC,
+	AB8500_VPLLVANAREGU,
+	AB8500_VREFDDR,
+	AB8500_EXTSUPPLYREGU,
+	AB8500_VAUX12REGU,
+	AB8500_VRF1VAUX3REGU,
+	AB8500_VAUX1SEL,
+	AB8500_VAUX2SEL,
+	AB8500_VRF1VAUX3SEL,
+	AB8500_REGUCTRL2SPARE,
+	AB8500_REGUCTRLDISCH,
+	AB8500_REGUCTRLDISCH2,
+	AB8500_VSMPS1SEL1,
+	AB8500_NUM_REGULATOR_REGISTERS,
+};
+
+
+/* AB9540 registers */
+enum ab9540_regulator_reg {
+	AB9540_REGUREQUESTCTRL1,
+	AB9540_REGUREQUESTCTRL2,
+	AB9540_REGUREQUESTCTRL3,
+	AB9540_REGUREQUESTCTRL4,
+	AB9540_REGUSYSCLKREQ1HPVALID1,
+	AB9540_REGUSYSCLKREQ1HPVALID2,
+	AB9540_REGUHWHPREQ1VALID1,
+	AB9540_REGUHWHPREQ1VALID2,
+	AB9540_REGUHWHPREQ2VALID1,
+	AB9540_REGUHWHPREQ2VALID2,
+	AB9540_REGUSWHPREQVALID1,
+	AB9540_REGUSWHPREQVALID2,
+	AB9540_REGUSYSCLKREQVALID1,
+	AB9540_REGUSYSCLKREQVALID2,
+	AB9540_REGUVAUX4REQVALID,
+	AB9540_REGUMISC1,
+	AB9540_VAUDIOSUPPLY,
+	AB9540_REGUCTRL1VAMIC,
+	AB9540_VSMPS1REGU,
+	AB9540_VSMPS2REGU,
+	AB9540_VSMPS3REGU, /* NOTE! PRCMU register */
+	AB9540_VPLLVANAREGU,
+	AB9540_EXTSUPPLYREGU,
+	AB9540_VAUX12REGU,
+	AB9540_VRF1VAUX3REGU,
+	AB9540_VSMPS1SEL1,
+	AB9540_VSMPS1SEL2,
+	AB9540_VSMPS1SEL3,
+	AB9540_VSMPS2SEL1,
+	AB9540_VSMPS2SEL2,
+	AB9540_VSMPS2SEL3,
+	AB9540_VSMPS3SEL1, /* NOTE! PRCMU register */
+	AB9540_VSMPS3SEL2, /* NOTE! PRCMU register */
+	AB9540_VAUX1SEL,
+	AB9540_VAUX2SEL,
+	AB9540_VRF1VAUX3SEL,
+	AB9540_REGUCTRL2SPARE,
+	AB9540_VAUX4REQCTRL,
+	AB9540_VAUX4REGU,
+	AB9540_VAUX4SEL,
+	AB9540_REGUCTRLDISCH,
+	AB9540_REGUCTRLDISCH2,
+	AB9540_REGUCTRLDISCH3,
+	AB9540_NUM_REGULATOR_REGISTERS,
+};
+
+#endif
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
new file mode 100644
index 00000000..4ed1b30a
--- /dev/null
+++ b/include/linux/regulator/consumer.h
@@ -0,0 +1,349 @@
+/*
+ * consumer.h -- SoC Regulator consumer support.
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Regulator Consumer Interface.
+ *
+ * A Power Management Regulator framework for SoC based devices.
+ * Features:-
+ *   o Voltage and current level control.
+ *   o Operating mode control.
+ *   o Regulator status.
+ *   o sysfs entries for showing client devices and status
+ *
+ * EXPERIMENTAL FEATURES:
+ *   Dynamic Regulator operating Mode Switching (DRMS) - allows regulators
+ *   to use most efficient operating mode depending upon voltage and load and
+ *   is transparent to client drivers.
+ *
+ *   e.g. Devices x,y,z share regulator r. Device x and y draw 20mA each during
+ *   IO and 1mA at idle. Device z draws 100mA when under load and 5mA when
+ *   idling. Regulator r has > 90% efficiency in NORMAL mode at loads > 100mA
+ *   but this drops rapidly to 60% when below 100mA. Regulator r has > 90%
+ *   efficiency in IDLE mode at loads < 10mA. Thus regulator r will operate
+ *   in normal mode for loads > 10mA and in IDLE mode for load <= 10mA.
+ *
+ */
+
+#ifndef __LINUX_REGULATOR_CONSUMER_H_
+#define __LINUX_REGULATOR_CONSUMER_H_
+
+struct device;
+struct notifier_block;
+
+/*
+ * Regulator operating modes.
+ *
+ * Regulators can run in a variety of different operating modes depending on
+ * output load. This allows further system power savings by selecting the
+ * best (and most efficient) regulator mode for a desired load.
+ *
+ * Most drivers will only care about NORMAL. The modes below are generic and
+ * will probably not match the naming convention of your regulator data sheet
+ * but should match the use cases in the datasheet.
+ *
+ * In order of power efficiency (least efficient at top).
+ *
+ *  Mode       Description
+ *  FAST       Regulator can handle fast changes in it's load.
+ *             e.g. useful in CPU voltage & frequency scaling where
+ *             load can quickly increase with CPU frequency increases.
+ *
+ *  NORMAL     Normal regulator power supply mode. Most drivers will
+ *             use this mode.
+ *
+ *  IDLE       Regulator runs in a more efficient mode for light
+ *             loads. Can be used for devices that have a low power
+ *             requirement during periods of inactivity. This mode
+ *             may be more noisy than NORMAL and may not be able
+ *             to handle fast load switching.
+ *
+ *  STANDBY    Regulator runs in the most efficient mode for very
+ *             light loads. Can be used by devices when they are
+ *             in a sleep/standby state. This mode is likely to be
+ *             the most noisy and may not be able to handle fast load
+ *             switching.
+ *
+ * NOTE: Most regulators will only support a subset of these modes. Some
+ * will only just support NORMAL.
+ *
+ * These modes can be OR'ed together to make up a mask of valid register modes.
+ */
+
+#define REGULATOR_MODE_FAST			0x1
+#define REGULATOR_MODE_NORMAL			0x2
+#define REGULATOR_MODE_IDLE			0x4
+#define REGULATOR_MODE_STANDBY			0x8
+
+/*
+ * Regulator notifier events.
+ *
+ * UNDER_VOLTAGE  Regulator output is under voltage.
+ * OVER_CURRENT   Regulator output current is too high.
+ * REGULATION_OUT Regulator output is out of regulation.
+ * FAIL           Regulator output has failed.
+ * OVER_TEMP      Regulator over temp.
+ * FORCE_DISABLE  Regulator forcibly shut down by software.
+ * VOLTAGE_CHANGE Regulator voltage changed.
+ * DISABLE        Regulator was disabled.
+ *
+ * NOTE: These events can be OR'ed together when passed into handler.
+ */
+
+#define REGULATOR_EVENT_UNDER_VOLTAGE		0x01
+#define REGULATOR_EVENT_OVER_CURRENT		0x02
+#define REGULATOR_EVENT_REGULATION_OUT		0x04
+#define REGULATOR_EVENT_FAIL			0x08
+#define REGULATOR_EVENT_OVER_TEMP		0x10
+#define REGULATOR_EVENT_FORCE_DISABLE		0x20
+#define REGULATOR_EVENT_VOLTAGE_CHANGE		0x40
+#define REGULATOR_EVENT_DISABLE 		0x80
+
+struct regulator;
+
+/**
+ * struct regulator_bulk_data - Data used for bulk regulator operations.
+ *
+ * @supply:   The name of the supply.  Initialised by the user before
+ *            using the bulk regulator APIs.
+ * @consumer: The regulator consumer for the supply.  This will be managed
+ *            by the bulk API.
+ *
+ * The regulator APIs provide a series of regulator_bulk_() API calls as
+ * a convenience to consumers which require multiple supplies.  This
+ * structure is used to manage data for these calls.
+ */
+struct regulator_bulk_data {
+	const char *supply;
+	struct regulator *consumer;
+
+	/* private: Internal use */
+	int ret;
+};
+
+#if defined(CONFIG_REGULATOR)
+
+/* regulator get and put */
+struct regulator *__must_check regulator_get(struct device *dev,
+					     const char *id);
+struct regulator *__must_check devm_regulator_get(struct device *dev,
+					     const char *id);
+struct regulator *__must_check regulator_get_exclusive(struct device *dev,
+						       const char *id);
+void regulator_put(struct regulator *regulator);
+void devm_regulator_put(struct regulator *regulator);
+
+/* regulator output control and status */
+int regulator_enable(struct regulator *regulator);
+int regulator_disable(struct regulator *regulator);
+int regulator_force_disable(struct regulator *regulator);
+int regulator_is_enabled(struct regulator *regulator);
+int regulator_disable_deferred(struct regulator *regulator, int ms);
+
+int regulator_bulk_get(struct device *dev, int num_consumers,
+		       struct regulator_bulk_data *consumers);
+int devm_regulator_bulk_get(struct device *dev, int num_consumers,
+			    struct regulator_bulk_data *consumers);
+int regulator_bulk_enable(int num_consumers,
+			  struct regulator_bulk_data *consumers);
+int regulator_bulk_disable(int num_consumers,
+			   struct regulator_bulk_data *consumers);
+int regulator_bulk_force_disable(int num_consumers,
+			   struct regulator_bulk_data *consumers);
+void regulator_bulk_free(int num_consumers,
+			 struct regulator_bulk_data *consumers);
+
+int regulator_count_voltages(struct regulator *regulator);
+int regulator_list_voltage(struct regulator *regulator, unsigned selector);
+int regulator_is_supported_voltage(struct regulator *regulator,
+				   int min_uV, int max_uV);
+int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV);
+int regulator_set_voltage_time(struct regulator *regulator,
+			       int old_uV, int new_uV);
+int regulator_get_voltage(struct regulator *regulator);
+int regulator_sync_voltage(struct regulator *regulator);
+int regulator_set_current_limit(struct regulator *regulator,
+			       int min_uA, int max_uA);
+int regulator_get_current_limit(struct regulator *regulator);
+
+int regulator_set_mode(struct regulator *regulator, unsigned int mode);
+unsigned int regulator_get_mode(struct regulator *regulator);
+int regulator_set_optimum_mode(struct regulator *regulator, int load_uA);
+
+/* regulator notifier block */
+int regulator_register_notifier(struct regulator *regulator,
+			      struct notifier_block *nb);
+int regulator_unregister_notifier(struct regulator *regulator,
+				struct notifier_block *nb);
+
+/* driver data - core doesn't touch */
+void *regulator_get_drvdata(struct regulator *regulator);
+void regulator_set_drvdata(struct regulator *regulator, void *data);
+
+#else
+
+/*
+ * Make sure client drivers will still build on systems with no software
+ * controllable voltage or current regulators.
+ */
+static inline struct regulator *__must_check regulator_get(struct device *dev,
+	const char *id)
+{
+	/* Nothing except the stubbed out regulator API should be
+	 * looking at the value except to check if it is an error
+	 * value. Drivers are free to handle NULL specifically by
+	 * skipping all regulator API calls, but they don't have to.
+	 * Drivers which don't, should make sure they properly handle
+	 * corner cases of the API, such as regulator_get_voltage()
+	 * returning 0.
+	 */
+	return NULL;
+}
+
+static inline struct regulator *__must_check
+devm_regulator_get(struct device *dev, const char *id)
+{
+	return NULL;
+}
+
+static inline void regulator_put(struct regulator *regulator)
+{
+}
+
+static inline void devm_regulator_put(struct regulator *regulator)
+{
+}
+
+static inline int regulator_enable(struct regulator *regulator)
+{
+	return 0;
+}
+
+static inline int regulator_disable(struct regulator *regulator)
+{
+	return 0;
+}
+
+static inline int regulator_force_disable(struct regulator *regulator)
+{
+	return 0;
+}
+
+static inline int regulator_disable_deferred(struct regulator *regulator,
+					     int ms)
+{
+	return 0;
+}
+
+static inline int regulator_is_enabled(struct regulator *regulator)
+{
+	return 1;
+}
+
+static inline int regulator_bulk_get(struct device *dev,
+				     int num_consumers,
+				     struct regulator_bulk_data *consumers)
+{
+	return 0;
+}
+
+static inline int devm_regulator_bulk_get(struct device *dev, int num_consumers,
+					  struct regulator_bulk_data *consumers)
+{
+	return 0;
+}
+
+static inline int regulator_bulk_enable(int num_consumers,
+					struct regulator_bulk_data *consumers)
+{
+	return 0;
+}
+
+static inline int regulator_bulk_disable(int num_consumers,
+					 struct regulator_bulk_data *consumers)
+{
+	return 0;
+}
+
+static inline int regulator_bulk_force_disable(int num_consumers,
+					struct regulator_bulk_data *consumers)
+{
+	return 0;
+}
+
+static inline void regulator_bulk_free(int num_consumers,
+				       struct regulator_bulk_data *consumers)
+{
+}
+
+static inline int regulator_set_voltage(struct regulator *regulator,
+					int min_uV, int max_uV)
+{
+	return 0;
+}
+
+static inline int regulator_get_voltage(struct regulator *regulator)
+{
+	return 0;
+}
+
+static inline int regulator_set_current_limit(struct regulator *regulator,
+					     int min_uA, int max_uA)
+{
+	return 0;
+}
+
+static inline int regulator_get_current_limit(struct regulator *regulator)
+{
+	return 0;
+}
+
+static inline int regulator_set_mode(struct regulator *regulator,
+	unsigned int mode)
+{
+	return 0;
+}
+
+static inline unsigned int regulator_get_mode(struct regulator *regulator)
+{
+	return REGULATOR_MODE_NORMAL;
+}
+
+static inline int regulator_set_optimum_mode(struct regulator *regulator,
+					int load_uA)
+{
+	return REGULATOR_MODE_NORMAL;
+}
+
+static inline int regulator_register_notifier(struct regulator *regulator,
+			      struct notifier_block *nb)
+{
+	return 0;
+}
+
+static inline int regulator_unregister_notifier(struct regulator *regulator,
+				struct notifier_block *nb)
+{
+	return 0;
+}
+
+static inline void *regulator_get_drvdata(struct regulator *regulator)
+{
+	return NULL;
+}
+
+static inline void regulator_set_drvdata(struct regulator *regulator,
+	void *data)
+{
+}
+
+#endif
+
+#endif
diff --git a/include/linux/regulator/db8500-prcmu.h b/include/linux/regulator/db8500-prcmu.h
new file mode 100644
index 00000000..61206231
--- /dev/null
+++ b/include/linux/regulator/db8500-prcmu.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
+ *
+ * Interface to power domain regulators on DB8500
+ */
+
+#ifndef __REGULATOR_H__
+#define __REGULATOR_H__
+
+/* Number of DB8500 regulators and regulator enumeration */
+enum db8500_regulator_id {
+	DB8500_REGULATOR_VAPE,
+	DB8500_REGULATOR_VARM,
+	DB8500_REGULATOR_VMODEM,
+	DB8500_REGULATOR_VPLL,
+	DB8500_REGULATOR_VSMPS1,
+	DB8500_REGULATOR_VSMPS2,
+	DB8500_REGULATOR_VSMPS3,
+	DB8500_REGULATOR_VRF1,
+	DB8500_REGULATOR_SWITCH_SVAMMDSP,
+	DB8500_REGULATOR_SWITCH_SVAMMDSPRET,
+	DB8500_REGULATOR_SWITCH_SVAPIPE,
+	DB8500_REGULATOR_SWITCH_SIAMMDSP,
+	DB8500_REGULATOR_SWITCH_SIAMMDSPRET,
+	DB8500_REGULATOR_SWITCH_SIAPIPE,
+	DB8500_REGULATOR_SWITCH_SGA,
+	DB8500_REGULATOR_SWITCH_B2R2_MCDE,
+	DB8500_REGULATOR_SWITCH_ESRAM12,
+	DB8500_REGULATOR_SWITCH_ESRAM12RET,
+	DB8500_REGULATOR_SWITCH_ESRAM34,
+	DB8500_REGULATOR_SWITCH_ESRAM34RET,
+	DB8500_NUM_REGULATORS
+};
+
+/*
+ * Exported interface for CPUIdle only. This function is called with all
+ * interrupts turned off.
+ */
+int power_state_active_is_enabled(void);
+
+#endif
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
new file mode 100644
index 00000000..fa8b55b8
--- /dev/null
+++ b/include/linux/regulator/driver.h
@@ -0,0 +1,229 @@
+/*
+ * driver.h -- SoC Regulator driver support.
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Regulator Driver Interface.
+ */
+
+#ifndef __LINUX_REGULATOR_DRIVER_H_
+#define __LINUX_REGULATOR_DRIVER_H_
+
+#include <linux/device.h>
+#include <linux/notifier.h>
+#include <linux/regulator/consumer.h>
+
+struct regulator_dev;
+struct regulator_init_data;
+
+enum regulator_status {
+	REGULATOR_STATUS_OFF,
+	REGULATOR_STATUS_ON,
+	REGULATOR_STATUS_ERROR,
+	/* fast/normal/idle/standby are flavors of "on" */
+	REGULATOR_STATUS_FAST,
+	REGULATOR_STATUS_NORMAL,
+	REGULATOR_STATUS_IDLE,
+	REGULATOR_STATUS_STANDBY,
+};
+
+/**
+ * struct regulator_ops - regulator operations.
+ *
+ * @enable: Configure the regulator as enabled.
+ * @disable: Configure the regulator as disabled.
+ * @is_enabled: Return 1 if the regulator is enabled, 0 if not.
+ *		May also return negative errno.
+ *
+ * @set_voltage: Set the voltage for the regulator within the range specified.
+ *               The driver should select the voltage closest to min_uV.
+ * @set_voltage_sel: Set the voltage for the regulator using the specified
+ *                   selector.
+ * @get_voltage: Return the currently configured voltage for the regulator.
+ * @get_voltage_sel: Return the currently configured voltage selector for the
+ *                   regulator.
+ * @list_voltage: Return one of the supported voltages, in microvolts; zero
+ *	if the selector indicates a voltage that is unusable on this system;
+ *	or negative errno.  Selectors range from zero to one less than
+ *	regulator_desc.n_voltages.  Voltages may be reported in any order.
+ *
+ * @set_current_limit: Configure a limit for a current-limited regulator.
+ * @get_current_limit: Get the configured limit for a current-limited regulator.
+ *
+ * @set_mode: Set the configured operating mode for the regulator.
+ * @get_mode: Get the configured operating mode for the regulator.
+ * @get_status: Return actual (not as-configured) status of regulator, as a
+ *	REGULATOR_STATUS value (or negative errno)
+ * @get_optimum_mode: Get the most efficient operating mode for the regulator
+ *                    when running with the specified parameters.
+ *
+ * @enable_time: Time taken for the regulator voltage output voltage to
+ *               stabilise after being enabled, in microseconds.
+ * @set_voltage_time_sel: Time taken for the regulator voltage output voltage
+ *               to stabilise after being set to a new value, in microseconds.
+ *               The function provides the from and to voltage selector, the
+ *               function should return the worst case.
+ *
+ * @set_suspend_voltage: Set the voltage for the regulator when the system
+ *                       is suspended.
+ * @set_suspend_enable: Mark the regulator as enabled when the system is
+ *                      suspended.
+ * @set_suspend_disable: Mark the regulator as disabled when the system is
+ *                       suspended.
+ * @set_suspend_mode: Set the operating mode for the regulator when the
+ *                    system is suspended.
+ *
+ * This struct describes regulator operations which can be implemented by
+ * regulator chip drivers.
+ */
+struct regulator_ops {
+
+	/* enumerate supported voltages */
+	int (*list_voltage) (struct regulator_dev *, unsigned selector);
+
+	/* get/set regulator voltage */
+	int (*set_voltage) (struct regulator_dev *, int min_uV, int max_uV,
+			    unsigned *selector);
+	int (*set_voltage_sel) (struct regulator_dev *, unsigned selector);
+	int (*get_voltage) (struct regulator_dev *);
+	int (*get_voltage_sel) (struct regulator_dev *);
+
+	/* get/set regulator current  */
+	int (*set_current_limit) (struct regulator_dev *,
+				 int min_uA, int max_uA);
+	int (*get_current_limit) (struct regulator_dev *);
+
+	/* enable/disable regulator */
+	int (*enable) (struct regulator_dev *);
+	int (*disable) (struct regulator_dev *);
+	int (*is_enabled) (struct regulator_dev *);
+
+	/* get/set regulator operating mode (defined in consumer.h) */
+	int (*set_mode) (struct regulator_dev *, unsigned int mode);
+	unsigned int (*get_mode) (struct regulator_dev *);
+
+	/* Time taken to enable or set voltage on the regulator */
+	int (*enable_time) (struct regulator_dev *);
+	int (*set_voltage_time_sel) (struct regulator_dev *,
+				     unsigned int old_selector,
+				     unsigned int new_selector);
+
+	/* report regulator status ... most other accessors report
+	 * control inputs, this reports results of combining inputs
+	 * from Linux (and other sources) with the actual load.
+	 * returns REGULATOR_STATUS_* or negative errno.
+	 */
+	int (*get_status)(struct regulator_dev *);
+
+	/* get most efficient regulator operating mode for load */
+	unsigned int (*get_optimum_mode) (struct regulator_dev *, int input_uV,
+					  int output_uV, int load_uA);
+
+	/* the operations below are for configuration of regulator state when
+	 * its parent PMIC enters a global STANDBY/HIBERNATE state */
+
+	/* set regulator suspend voltage */
+	int (*set_suspend_voltage) (struct regulator_dev *, int uV);
+
+	/* enable/disable regulator in suspend state */
+	int (*set_suspend_enable) (struct regulator_dev *);
+	int (*set_suspend_disable) (struct regulator_dev *);
+
+	/* set regulator suspend operating mode (defined in consumer.h) */
+	int (*set_suspend_mode) (struct regulator_dev *, unsigned int mode);
+};
+
+/*
+ * Regulators can either control voltage or current.
+ */
+enum regulator_type {
+	REGULATOR_VOLTAGE,
+	REGULATOR_CURRENT,
+};
+
+/**
+ * struct regulator_desc - Regulator descriptor
+ *
+ * Each regulator registered with the core is described with a structure of
+ * this type.
+ *
+ * @name: Identifying name for the regulator.
+ * @supply_name: Identifying the regulator supply
+ * @id: Numerical identifier for the regulator.
+ * @n_voltages: Number of selectors available for ops.list_voltage().
+ * @ops: Regulator operations table.
+ * @irq: Interrupt number for the regulator.
+ * @type: Indicates if the regulator is a voltage or current regulator.
+ * @owner: Module providing the regulator, used for refcounting.
+ */
+struct regulator_desc {
+	const char *name;
+	const char *supply_name;
+	int id;
+	unsigned n_voltages;
+	struct regulator_ops *ops;
+	int irq;
+	enum regulator_type type;
+	struct module *owner;
+};
+
+/*
+ * struct regulator_dev
+ *
+ * Voltage / Current regulator class device. One for each
+ * regulator.
+ *
+ * This should *not* be used directly by anything except the regulator
+ * core and notification injection (which should take the mutex and do
+ * no other direct access).
+ */
+struct regulator_dev {
+	struct regulator_desc *desc;
+	int exclusive;
+	u32 use_count;
+	u32 open_count;
+
+	/* lists we belong to */
+	struct list_head list; /* list of all regulators */
+
+	/* lists we own */
+	struct list_head consumer_list; /* consumers we supply */
+
+	struct blocking_notifier_head notifier;
+	struct mutex mutex; /* consumer lock */
+	struct module *owner;
+	struct device dev;
+	struct regulation_constraints *constraints;
+	struct regulator *supply;	/* for tree */
+
+	struct delayed_work disable_work;
+	int deferred_disables;
+
+	void *reg_data;		/* regulator_dev data */
+
+	struct dentry *debugfs;
+};
+
+struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
+	struct device *dev, const struct regulator_init_data *init_data,
+	void *driver_data, struct device_node *of_node);
+void regulator_unregister(struct regulator_dev *rdev);
+
+int regulator_notifier_call_chain(struct regulator_dev *rdev,
+				  unsigned long event, void *data);
+
+void *rdev_get_drvdata(struct regulator_dev *rdev);
+struct device *rdev_get_dev(struct regulator_dev *rdev);
+int rdev_get_id(struct regulator_dev *rdev);
+
+int regulator_mode_to_status(unsigned int);
+
+void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data);
+
+#endif
diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h
new file mode 100644
index 00000000..936a7d8c
--- /dev/null
+++ b/include/linux/regulator/fixed.h
@@ -0,0 +1,64 @@
+/*
+ * fixed.h
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * Copyright (c) 2009 Nokia Corporation
+ * Roger Quadros <ext-roger.quadros@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ */
+
+#ifndef __REGULATOR_FIXED_H
+#define __REGULATOR_FIXED_H
+
+struct regulator_init_data;
+
+/**
+ * struct fixed_voltage_config - fixed_voltage_config structure
+ * @supply_name:	Name of the regulator supply
+ * @microvolts:		Output voltage of regulator
+ * @gpio:		GPIO to use for enable control
+ * 			set to -EINVAL if not used
+ * @startup_delay:	Start-up time in microseconds
+ * @enable_high:	Polarity of enable GPIO
+ *			1 = Active high, 0 = Active low
+ * @enabled_at_boot:	Whether regulator has been enabled at
+ * 			boot or not. 1 = Yes, 0 = No
+ * 			This is used to keep the regulator at
+ * 			the default state
+ * @init_data:		regulator_init_data
+ *
+ * This structure contains fixed voltage regulator configuration
+ * information that must be passed by platform code to the fixed
+ * voltage regulator driver.
+ */
+struct fixed_voltage_config {
+	const char *supply_name;
+	int microvolts;
+	int gpio;
+	unsigned startup_delay;
+	unsigned enable_high:1;
+	unsigned enabled_at_boot:1;
+	struct regulator_init_data *init_data;
+};
+
+struct regulator_consumer_supply;
+
+#if IS_ENABLED(CONFIG_REGULATOR)
+struct platform_device *regulator_register_fixed(int id,
+		struct regulator_consumer_supply *supplies, int num_supplies);
+#else
+static inline struct platform_device *regulator_register_fixed(int id,
+		struct regulator_consumer_supply *supplies, int num_supplies)
+{
+	return NULL;
+}
+#endif
+
+#endif
diff --git a/include/linux/regulator/gpio-regulator.h b/include/linux/regulator/gpio-regulator.h
new file mode 100644
index 00000000..19fbd267
--- /dev/null
+++ b/include/linux/regulator/gpio-regulator.h
@@ -0,0 +1,87 @@
+/*
+ * gpio-regulator.h
+ *
+ * Copyright 2011 Heiko Stuebner <heiko@sntech.de>
+ *
+ * based on fixed.h
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * Copyright (c) 2009 Nokia Corporation
+ * Roger Quadros <ext-roger.quadros@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ */
+
+#ifndef __REGULATOR_GPIO_H
+#define __REGULATOR_GPIO_H
+
+struct regulator_init_data;
+
+enum regulator_type;
+
+/**
+ * struct gpio_regulator_state - state description
+ * @value:		microvolts or microamps
+ * @gpios:		bitfield of gpio target-states for the value
+ *
+ * This structure describes a supported setting of the regulator
+ * and the necessary gpio-state to achieve it.
+ *
+ * The n-th bit in the bitfield describes the state of the n-th GPIO
+ * from the gpios-array defined in gpio_regulator_config below.
+ */
+struct gpio_regulator_state {
+	int value;
+	int gpios;
+};
+
+/**
+ * struct gpio_regulator_config - config structure
+ * @supply_name:	Name of the regulator supply
+ * @enable_gpio:	GPIO to use for enable control
+ *			set to -EINVAL if not used
+ * @enable_high:	Polarity of enable GPIO
+ *			1 = Active high, 0 = Active low
+ * @enabled_at_boot:	Whether regulator has been enabled at
+ *			boot or not. 1 = Yes, 0 = No
+ *			This is used to keep the regulator at
+ *			the default state
+ * @startup_delay:	Start-up time in microseconds
+ * @gpios:		Array containing the gpios needed to control
+ *			the setting of the regulator
+ * @nr_gpios:		Number of gpios
+ * @states:		Array of gpio_regulator_state entries describing
+ *			the gpio state for specific voltages
+ * @nr_states:		Number of states available
+ * @regulator_type:	either REGULATOR_CURRENT or REGULATOR_VOLTAGE
+ * @init_data:		regulator_init_data
+ *
+ * This structure contains gpio-voltage regulator configuration
+ * information that must be passed by platform code to the
+ * gpio-voltage regulator driver.
+ */
+struct gpio_regulator_config {
+	const char *supply_name;
+
+	int enable_gpio;
+	unsigned enable_high:1;
+	unsigned enabled_at_boot:1;
+	unsigned startup_delay;
+
+	struct gpio *gpios;
+	int nr_gpios;
+
+	struct gpio_regulator_state *states;
+	int nr_states;
+
+	enum regulator_type type;
+	struct regulator_init_data *init_data;
+};
+
+#endif
diff --git a/include/linux/regulator/lp3971.h b/include/linux/regulator/lp3971.h
new file mode 100644
index 00000000..61401649
--- /dev/null
+++ b/include/linux/regulator/lp3971.h
@@ -0,0 +1,51 @@
+/*
+ * National Semiconductors LP3971 PMIC chip client interface
+ *
+ *  Copyright (C) 2009 Samsung Electronics
+ *  Author: Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * Based on wm8400.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_REGULATOR_LP3971_H
+#define __LINUX_REGULATOR_LP3971_H
+
+#include <linux/regulator/machine.h>
+
+#define LP3971_LDO1  0
+#define LP3971_LDO2  1
+#define LP3971_LDO3  2
+#define LP3971_LDO4  3
+#define LP3971_LDO5  4
+
+#define LP3971_DCDC1 5
+#define LP3971_DCDC2 6
+#define LP3971_DCDC3 7
+
+#define LP3971_NUM_REGULATORS 8
+
+struct lp3971_regulator_subdev {
+	int id;
+	struct regulator_init_data *initdata;
+};
+
+struct lp3971_platform_data {
+	int num_regulators;
+	struct lp3971_regulator_subdev *regulators;
+};
+
+#endif
diff --git a/include/linux/regulator/lp3972.h b/include/linux/regulator/lp3972.h
new file mode 100644
index 00000000..9bb7389b
--- /dev/null
+++ b/include/linux/regulator/lp3972.h
@@ -0,0 +1,48 @@
+/*
+ * National Semiconductors LP3972 PMIC chip client interface
+ *
+ * Based on lp3971.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_REGULATOR_LP3972_H
+#define __LINUX_REGULATOR_LP3972_H
+
+#include <linux/regulator/machine.h>
+
+#define LP3972_LDO1  0
+#define LP3972_LDO2  1
+#define LP3972_LDO3  2
+#define LP3972_LDO4  3
+#define LP3972_LDO5  4
+
+#define LP3972_DCDC1 5
+#define LP3972_DCDC2 6
+#define LP3972_DCDC3 7
+
+#define LP3972_NUM_REGULATORS 8
+
+struct lp3972_regulator_subdev {
+	int id;
+	struct regulator_init_data *initdata;
+};
+
+struct lp3972_platform_data {
+	int num_regulators;
+	struct lp3972_regulator_subdev *regulators;
+};
+
+#endif
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
new file mode 100644
index 00000000..b0210844
--- /dev/null
+++ b/include/linux/regulator/machine.h
@@ -0,0 +1,201 @@
+/*
+ * machine.h -- SoC Regulator support, machine/board driver API.
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Regulator Machine/Board Interface.
+ */
+
+#ifndef __LINUX_REGULATOR_MACHINE_H_
+#define __LINUX_REGULATOR_MACHINE_H_
+
+#include <linux/regulator/consumer.h>
+#include <linux/suspend.h>
+
+struct regulator;
+
+/*
+ * Regulator operation constraint flags. These flags are used to enable
+ * certain regulator operations and can be OR'ed together.
+ *
+ * VOLTAGE:  Regulator output voltage can be changed by software on this
+ *           board/machine.
+ * CURRENT:  Regulator output current can be changed by software on this
+ *           board/machine.
+ * MODE:     Regulator operating mode can be changed by software on this
+ *           board/machine.
+ * STATUS:   Regulator can be enabled and disabled.
+ * DRMS:     Dynamic Regulator Mode Switching is enabled for this regulator.
+ */
+
+#define REGULATOR_CHANGE_VOLTAGE	0x1
+#define REGULATOR_CHANGE_CURRENT	0x2
+#define REGULATOR_CHANGE_MODE		0x4
+#define REGULATOR_CHANGE_STATUS		0x8
+#define REGULATOR_CHANGE_DRMS		0x10
+
+/**
+ * struct regulator_state - regulator state during low power system states
+ *
+ * This describes a regulators state during a system wide low power
+ * state.  One of enabled or disabled must be set for the
+ * configuration to be applied.
+ *
+ * @uV: Operating voltage during suspend.
+ * @mode: Operating mode during suspend.
+ * @enabled: Enabled during suspend.
+ * @disabled: Disabled during suspend.
+ */
+struct regulator_state {
+	int uV;	/* suspend voltage */
+	unsigned int mode; /* suspend regulator operating mode */
+	int enabled; /* is regulator enabled in this suspend state */
+	int disabled; /* is the regulator disbled in this suspend state */
+};
+
+/**
+ * struct regulation_constraints - regulator operating constraints.
+ *
+ * This struct describes regulator and board/machine specific constraints.
+ *
+ * @name: Descriptive name for the constraints, used for display purposes.
+ *
+ * @min_uV: Smallest voltage consumers may set.
+ * @max_uV: Largest voltage consumers may set.
+ * @uV_offset: Offset applied to voltages from consumer to compensate for
+ *             voltage drops.
+ *
+ * @min_uA: Smallest current consumers may set.
+ * @max_uA: Largest current consumers may set.
+ *
+ * @valid_modes_mask: Mask of modes which may be configured by consumers.
+ * @valid_ops_mask: Operations which may be performed by consumers.
+ *
+ * @always_on: Set if the regulator should never be disabled.
+ * @boot_on: Set if the regulator is enabled when the system is initially
+ *           started.  If the regulator is not enabled by the hardware or
+ *           bootloader then it will be enabled when the constraints are
+ *           applied.
+ * @apply_uV: Apply the voltage constraint when initialising.
+ *
+ * @input_uV: Input voltage for regulator when supplied by another regulator.
+ *
+ * @state_disk: State for regulator when system is suspended in disk mode.
+ * @state_mem: State for regulator when system is suspended in mem mode.
+ * @state_standby: State for regulator when system is suspended in standby
+ *                 mode.
+ * @initial_state: Suspend state to set by default.
+ * @initial_mode: Mode to set at startup.
+ */
+struct regulation_constraints {
+
+	const char *name;
+
+	/* voltage output range (inclusive) - for voltage control */
+	int min_uV;
+	int max_uV;
+
+	int uV_offset;
+
+	/* current output range (inclusive) - for current control */
+	int min_uA;
+	int max_uA;
+
+	/* valid regulator operating modes for this machine */
+	unsigned int valid_modes_mask;
+
+	/* valid operations for regulator on this machine */
+	unsigned int valid_ops_mask;
+
+	/* regulator input voltage - only if supply is another regulator */
+	int input_uV;
+
+	/* regulator suspend states for global PMIC STANDBY/HIBERNATE */
+	struct regulator_state state_disk;
+	struct regulator_state state_mem;
+	struct regulator_state state_standby;
+	suspend_state_t initial_state; /* suspend state to set at init */
+
+	/* mode to set on startup */
+	unsigned int initial_mode;
+
+	/* constraint flags */
+	unsigned always_on:1;	/* regulator never off when system is on */
+	unsigned boot_on:1;	/* bootloader/firmware enabled regulator */
+	unsigned apply_uV:1;	/* apply uV constraint if min == max */
+};
+
+/**
+ * struct regulator_consumer_supply - supply -> device mapping
+ *
+ * This maps a supply name to a device. Use of dev_name allows support for
+ * buses which make struct device available late such as I2C.
+ *
+ * @dev_name: Result of dev_name() for the consumer.
+ * @supply: Name for the supply.
+ */
+struct regulator_consumer_supply {
+	const char *dev_name;   /* dev_name() for consumer */
+	const char *supply;	/* consumer supply - e.g. "vcc" */
+};
+
+/* Initialize struct regulator_consumer_supply */
+#define REGULATOR_SUPPLY(_name, _dev_name)			\
+{								\
+	.supply		= _name,				\
+	.dev_name	= _dev_name,				\
+}
+
+/**
+ * struct regulator_init_data - regulator platform initialisation data.
+ *
+ * Initialisation constraints, our supply and consumers supplies.
+ *
+ * @supply_regulator: Parent regulator.  Specified using the regulator name
+ *                    as it appears in the name field in sysfs, which can
+ *                    be explicitly set using the constraints field 'name'.
+ *
+ * @constraints: Constraints.  These must be specified for the regulator to
+ *               be usable.
+ * @num_consumer_supplies: Number of consumer device supplies.
+ * @consumer_supplies: Consumer device supply configuration.
+ *
+ * @regulator_init: Callback invoked when the regulator has been registered.
+ * @driver_data: Data passed to regulator_init.
+ */
+struct regulator_init_data {
+	const char *supply_regulator;        /* or NULL for system supply */
+
+	struct regulation_constraints constraints;
+
+	int num_consumer_supplies;
+	struct regulator_consumer_supply *consumer_supplies;
+
+	/* optional regulator machine specific init */
+	int (*regulator_init)(void *driver_data);
+	void *driver_data;	/* core does not touch this */
+};
+
+int regulator_suspend_prepare(suspend_state_t state);
+int regulator_suspend_finish(void);
+
+#ifdef CONFIG_REGULATOR
+void regulator_has_full_constraints(void);
+void regulator_use_dummy_regulator(void);
+#else
+static inline void regulator_has_full_constraints(void)
+{
+}
+
+static inline void regulator_use_dummy_regulator(void)
+{
+}
+#endif
+
+#endif
diff --git a/include/linux/regulator/max1586.h b/include/linux/regulator/max1586.h
new file mode 100644
index 00000000..de9a7fae
--- /dev/null
+++ b/include/linux/regulator/max1586.h
@@ -0,0 +1,63 @@
+/*
+ * max1586.h  --  Voltage regulation for the Maxim 1586
+ *
+ * Copyright (C) 2008 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef REGULATOR_MAX1586
+#define REGULATOR_MAX1586
+
+#include <linux/regulator/machine.h>
+
+#define MAX1586_V3 0
+#define MAX1586_V6 1
+
+/* precalculated values for v3_gain */
+#define MAX1586_GAIN_NO_R24   1000000  /* 700000 .. 1475000 mV */
+#define MAX1586_GAIN_R24_3k32 1051098  /* 735768 .. 1550369 mV */
+#define MAX1586_GAIN_R24_5k11 1078648  /* 755053 .. 1591005 mV */
+#define MAX1586_GAIN_R24_7k5  1115432  /* 780802 .. 1645262 mV */
+
+/**
+ * max1586_subdev_data - regulator data
+ * @id: regulator Id (either MAX1586_V3 or MAX1586_V6)
+ * @name: regulator cute name (example for V3: "vcc_core")
+ * @platform_data: regulator init data (constraints, supplies, ...)
+ */
+struct max1586_subdev_data {
+	int				id;
+	char				*name;
+	struct regulator_init_data	*platform_data;
+};
+
+/**
+ * max1586_platform_data - platform data for max1586
+ * @num_subdevs: number of regulators used (may be 1 or 2)
+ * @subdevs: regulator used
+ *           At most, there will be a regulator for V3 and one for V6 voltages.
+ * @v3_gain: gain on the V3 voltage output multiplied by 1e6.
+ *           This can be calculated as ((1 + R24/R25 + R24/185.5kOhm) * 1e6)
+ *           for an external resistor configuration as described in the
+ *           data sheet (R25=100kOhm).
+ */
+struct max1586_platform_data {
+	int num_subdevs;
+	struct max1586_subdev_data *subdevs;
+	int v3_gain;
+};
+
+#endif
diff --git a/include/linux/regulator/max8649.h b/include/linux/regulator/max8649.h
new file mode 100644
index 00000000..417d14ec
--- /dev/null
+++ b/include/linux/regulator/max8649.h
@@ -0,0 +1,44 @@
+/*
+ * Interface of Maxim max8649
+ *
+ * Copyright (C) 2009-2010 Marvell International Ltd.
+ *      Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_REGULATOR_MAX8649_H
+#define	__LINUX_REGULATOR_MAX8649_H
+
+#include <linux/regulator/machine.h>
+
+enum {
+	MAX8649_EXTCLK_26MHZ = 0,
+	MAX8649_EXTCLK_13MHZ,
+	MAX8649_EXTCLK_19MHZ,	/* 19.2MHz */
+};
+
+enum {
+	MAX8649_RAMP_32MV = 0,
+	MAX8649_RAMP_16MV,
+	MAX8649_RAMP_8MV,
+	MAX8649_RAMP_4MV,
+	MAX8649_RAMP_2MV,
+	MAX8649_RAMP_1MV,
+	MAX8649_RAMP_0_5MV,
+	MAX8649_RAMP_0_25MV,
+};
+
+struct max8649_platform_data {
+	struct regulator_init_data *regulator;
+
+	unsigned	mode:2;		/* bit[1:0] = VID1,VID0 */
+	unsigned	extclk_freq:2;
+	unsigned	extclk:1;
+	unsigned	ramp_timing:3;
+	unsigned	ramp_down:1;
+};
+
+#endif	/* __LINUX_REGULATOR_MAX8649_H */
diff --git a/include/linux/regulator/max8660.h b/include/linux/regulator/max8660.h
new file mode 100644
index 00000000..99367636
--- /dev/null
+++ b/include/linux/regulator/max8660.h
@@ -0,0 +1,57 @@
+/*
+ * max8660.h  --  Voltage regulation for the Maxim 8660/8661
+ *
+ * Copyright (C) 2009 Wolfram Sang, Pengutronix e.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_REGULATOR_MAX8660_H
+#define __LINUX_REGULATOR_MAX8660_H
+
+#include <linux/regulator/machine.h>
+
+enum {
+	MAX8660_V3,
+	MAX8660_V4,
+	MAX8660_V5,
+	MAX8660_V6,
+	MAX8660_V7,
+	MAX8660_V_END,
+};
+
+/**
+ * max8660_subdev_data - regulator subdev data
+ * @id: regulator id
+ * @name: regulator name
+ * @platform_data: regulator init data
+ */
+struct max8660_subdev_data {
+	int				id;
+	char				*name;
+	struct regulator_init_data	*platform_data;
+};
+
+/**
+ * max8660_platform_data - platform data for max8660
+ * @num_subdevs: number of regulators used
+ * @subdevs: pointer to regulators used
+ * @en34_is_high: if EN34 is driven high, regulators cannot be en-/disabled.
+ */
+struct max8660_platform_data {
+	int num_subdevs;
+	struct max8660_subdev_data *subdevs;
+	unsigned en34_is_high:1;
+};
+#endif
diff --git a/include/linux/regulator/max8952.h b/include/linux/regulator/max8952.h
new file mode 100644
index 00000000..45e42855
--- /dev/null
+++ b/include/linux/regulator/max8952.h
@@ -0,0 +1,135 @@
+/*
+ * max8952.h - Voltage regulation for the Maxim 8952
+ *
+ *  Copyright (C) 2010 Samsung Electrnoics
+ *  MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef REGULATOR_MAX8952
+#define REGULATOR_MAX8952
+
+#include <linux/regulator/machine.h>
+
+enum {
+	MAX8952_DVS_MODE0,
+	MAX8952_DVS_MODE1,
+	MAX8952_DVS_MODE2,
+	MAX8952_DVS_MODE3,
+};
+
+enum {
+	MAX8952_DVS_770mV = 0,
+	MAX8952_DVS_780mV,
+	MAX8952_DVS_790mV,
+	MAX8952_DVS_800mV,
+	MAX8952_DVS_810mV,
+	MAX8952_DVS_820mV,
+	MAX8952_DVS_830mV,
+	MAX8952_DVS_840mV,
+	MAX8952_DVS_850mV,
+	MAX8952_DVS_860mV,
+	MAX8952_DVS_870mV,
+	MAX8952_DVS_880mV,
+	MAX8952_DVS_890mV,
+	MAX8952_DVS_900mV,
+	MAX8952_DVS_910mV,
+	MAX8952_DVS_920mV,
+	MAX8952_DVS_930mV,
+	MAX8952_DVS_940mV,
+	MAX8952_DVS_950mV,
+	MAX8952_DVS_960mV,
+	MAX8952_DVS_970mV,
+	MAX8952_DVS_980mV,
+	MAX8952_DVS_990mV,
+	MAX8952_DVS_1000mV,
+	MAX8952_DVS_1010mV,
+	MAX8952_DVS_1020mV,
+	MAX8952_DVS_1030mV,
+	MAX8952_DVS_1040mV,
+	MAX8952_DVS_1050mV,
+	MAX8952_DVS_1060mV,
+	MAX8952_DVS_1070mV,
+	MAX8952_DVS_1080mV,
+	MAX8952_DVS_1090mV,
+	MAX8952_DVS_1100mV,
+	MAX8952_DVS_1110mV,
+	MAX8952_DVS_1120mV,
+	MAX8952_DVS_1130mV,
+	MAX8952_DVS_1140mV,
+	MAX8952_DVS_1150mV,
+	MAX8952_DVS_1160mV,
+	MAX8952_DVS_1170mV,
+	MAX8952_DVS_1180mV,
+	MAX8952_DVS_1190mV,
+	MAX8952_DVS_1200mV,
+	MAX8952_DVS_1210mV,
+	MAX8952_DVS_1220mV,
+	MAX8952_DVS_1230mV,
+	MAX8952_DVS_1240mV,
+	MAX8952_DVS_1250mV,
+	MAX8952_DVS_1260mV,
+	MAX8952_DVS_1270mV,
+	MAX8952_DVS_1280mV,
+	MAX8952_DVS_1290mV,
+	MAX8952_DVS_1300mV,
+	MAX8952_DVS_1310mV,
+	MAX8952_DVS_1320mV,
+	MAX8952_DVS_1330mV,
+	MAX8952_DVS_1340mV,
+	MAX8952_DVS_1350mV,
+	MAX8952_DVS_1360mV,
+	MAX8952_DVS_1370mV,
+	MAX8952_DVS_1380mV,
+	MAX8952_DVS_1390mV,
+	MAX8952_DVS_1400mV,
+};
+
+enum {
+	MAX8952_SYNC_FREQ_26MHZ, /* Default */
+	MAX8952_SYNC_FREQ_13MHZ,
+	MAX8952_SYNC_FREQ_19_2MHZ,
+};
+
+enum {
+	MAX8952_RAMP_32mV_us = 0, /* Default */
+	MAX8952_RAMP_16mV_us,
+	MAX8952_RAMP_8mV_us,
+	MAX8952_RAMP_4mV_us,
+	MAX8952_RAMP_2mV_us,
+	MAX8952_RAMP_1mV_us,
+	MAX8952_RAMP_0_5mV_us,
+	MAX8952_RAMP_0_25mV_us,
+};
+
+#define MAX8952_NUM_DVS_MODE	4
+
+struct max8952_platform_data {
+	int gpio_vid0;
+	int gpio_vid1;
+	int gpio_en;
+
+	u8 default_mode;
+	u8 dvs_mode[MAX8952_NUM_DVS_MODE]; /* MAX8952_DVS_MODEx_XXXXmV */
+
+	u8 sync_freq;
+	u8 ramp_speed;
+
+	struct regulator_init_data reg_data;
+};
+
+
+#endif /* REGULATOR_MAX8952 */
diff --git a/include/linux/regulator/of_regulator.h b/include/linux/regulator/of_regulator.h
new file mode 100644
index 00000000..769704f2
--- /dev/null
+++ b/include/linux/regulator/of_regulator.h
@@ -0,0 +1,22 @@
+/*
+ * OpenFirmware regulator support routines
+ *
+ */
+
+#ifndef __LINUX_OF_REG_H
+#define __LINUX_OF_REG_H
+
+#if defined(CONFIG_OF)
+extern struct regulator_init_data
+	*of_get_regulator_init_data(struct device *dev,
+				    struct device_node *node);
+#else
+static inline struct regulator_init_data
+	*of_get_regulator_init_data(struct device *dev,
+				    struct device_node *node)
+{
+	return NULL;
+}
+#endif /* CONFIG_OF */
+
+#endif /* __LINUX_OF_REG_H */
diff --git a/include/linux/regulator/tps62360.h b/include/linux/regulator/tps62360.h
new file mode 100644
index 00000000..6a5c1b2c
--- /dev/null
+++ b/include/linux/regulator/tps62360.h
@@ -0,0 +1,57 @@
+/*
+ * tps62360.h -- TI tps62360
+ *
+ * Interface for regulator driver for TI TPS62360 Processor core supply
+ *
+ * Copyright (C) 2012 NVIDIA Corporation
+
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA	02110-1301, USA.
+ *
+ */
+
+#ifndef __LINUX_REGULATOR_TPS62360_H
+#define __LINUX_REGULATOR_TPS62360_H
+
+#include <linux/regulator/machine.h>
+
+/*
+ * struct tps62360_regulator_platform_data - tps62360 regulator platform data.
+ *
+ * @reg_init_data: The regulator init data.
+ * @en_force_pwm: Enable force pwm or not.
+ * @en_discharge: Enable discharge the output capacitor via internal
+ *                register.
+ * @en_internal_pulldn: internal pull down enable or not.
+ * @vsel0_gpio: Gpio number for vsel0. It should be -1 if this is tied with
+ *              fixed logic.
+ * @vsel1_gpio: Gpio number for vsel1. It should be -1 if this is tied with
+ *              fixed logic.
+ * @vsel0_def_state: Default state of vsel0. 1 if it is high else 0.
+ * @vsel1_def_state: Default state of vsel1. 1 if it is high else 0.
+ */
+struct tps62360_regulator_platform_data {
+	struct regulator_init_data reg_init_data;
+	bool en_force_pwm;
+	bool en_discharge;
+	bool en_internal_pulldn;
+	int vsel0_gpio;
+	int vsel1_gpio;
+	int vsel0_def_state;
+	int vsel1_def_state;
+};
+
+#endif /* __LINUX_REGULATOR_TPS62360_H */
diff --git a/include/linux/regulator/tps6507x.h b/include/linux/regulator/tps6507x.h
new file mode 100644
index 00000000..4892f591
--- /dev/null
+++ b/include/linux/regulator/tps6507x.h
@@ -0,0 +1,32 @@
+/*
+ * tps6507x.h  --  Voltage regulation for the Texas Instruments TPS6507X
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef REGULATOR_TPS6507X
+#define REGULATOR_TPS6507X
+
+/**
+ * tps6507x_reg_platform_data - platform data for tps6507x
+ * @defdcdc_default: Defines whether DCDC high or the low register controls
+ *	output voltage by default. Valid for DCDC2 and DCDC3 outputs only.
+ */
+struct tps6507x_reg_platform_data {
+	bool defdcdc_default;
+};
+
+#endif
diff --git a/include/linux/regulator/userspace-consumer.h b/include/linux/regulator/userspace-consumer.h
new file mode 100644
index 00000000..b4554ce9
--- /dev/null
+++ b/include/linux/regulator/userspace-consumer.h
@@ -0,0 +1,25 @@
+#ifndef __REGULATOR_PLATFORM_CONSUMER_H_
+#define __REGULATOR_PLATFORM_CONSUMER_H_
+
+struct regulator_consumer_supply;
+
+/**
+ * struct regulator_userspace_consumer_data - line consumer
+ * initialisation data.
+ *
+ * @name: Name for the consumer line
+ * @num_supplies: Number of supplies feeding the line
+ * @supplies: Supplies configuration.
+ * @init_on: Set if the regulators supplying the line should be
+ *           enabled during initialisation
+ */
+struct regulator_userspace_consumer_data {
+	const char *name;
+
+	int num_supplies;
+	struct regulator_bulk_data *supplies;
+
+	bool init_on;
+};
+
+#endif /* __REGULATOR_PLATFORM_CONSUMER_H_ */
diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h
new file mode 100644
index 00000000..ea3700cd
--- /dev/null
+++ b/include/linux/reiserfs_fs.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright 1996, 1997, 1998 Hans Reiser, see reiserfs/README for licensing and copyright details
+ */
+#ifndef _LINUX_REISER_FS_H
+#define _LINUX_REISER_FS_H
+
+#include <linux/types.h>
+#include <linux/magic.h>
+
+/*
+ *  include/linux/reiser_fs.h
+ *
+ *  Reiser File System constants and structures
+ *
+ */
+
+/* ioctl's command */
+#define REISERFS_IOC_UNPACK		_IOW(0xCD,1,long)
+/* define following flags to be the same as in ext2, so that chattr(1),
+   lsattr(1) will work with us. */
+#define REISERFS_IOC_GETFLAGS		FS_IOC_GETFLAGS
+#define REISERFS_IOC_SETFLAGS		FS_IOC_SETFLAGS
+#define REISERFS_IOC_GETVERSION		FS_IOC_GETVERSION
+#define REISERFS_IOC_SETVERSION		FS_IOC_SETVERSION
+
+#endif				/* _LINUX_REISER_FS_H */
diff --git a/include/linux/reiserfs_xattr.h b/include/linux/reiserfs_xattr.h
new file mode 100644
index 00000000..d8ce17c2
--- /dev/null
+++ b/include/linux/reiserfs_xattr.h
@@ -0,0 +1,24 @@
+/*
+  File: linux/reiserfs_xattr.h
+*/
+
+#ifndef _LINUX_REISERFS_XATTR_H
+#define _LINUX_REISERFS_XATTR_H
+
+#include <linux/types.h>
+
+/* Magic value in header */
+#define REISERFS_XATTR_MAGIC 0x52465841	/* "RFXA" */
+
+struct reiserfs_xattr_header {
+	__le32 h_magic;		/* magic number for identification */
+	__le32 h_hash;		/* hash of the value */
+};
+
+struct reiserfs_security_handle {
+	char *name;
+	void *value;
+	size_t length;
+};
+
+#endif  /*  _LINUX_REISERFS_XATTR_H  */
diff --git a/include/linux/relay.h b/include/linux/relay.h
new file mode 100644
index 00000000..91cacc34
--- /dev/null
+++ b/include/linux/relay.h
@@ -0,0 +1,292 @@
+/*
+ * linux/include/linux/relay.h
+ *
+ * Copyright (C) 2002, 2003 - Tom Zanussi (zanussi@us.ibm.com), IBM Corp
+ * Copyright (C) 1999, 2000, 2001, 2002 - Karim Yaghmour (karim@opersys.com)
+ *
+ * CONFIG_RELAY definitions and declarations
+ */
+
+#ifndef _LINUX_RELAY_H
+#define _LINUX_RELAY_H
+
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/wait.h>
+#include <linux/list.h>
+#include <linux/bug.h>
+#include <linux/fs.h>
+#include <linux/poll.h>
+#include <linux/kref.h>
+
+/* Needs a _much_ better name... */
+#define FIX_SIZE(x) ((((x) - 1) & PAGE_MASK) + PAGE_SIZE)
+
+/*
+ * Tracks changes to rchan/rchan_buf structs
+ */
+#define RELAYFS_CHANNEL_VERSION		7
+
+/*
+ * Per-cpu relay channel buffer
+ */
+struct rchan_buf
+{
+	void *start;			/* start of channel buffer */
+	void *data;			/* start of current sub-buffer */
+	size_t offset;			/* current offset into sub-buffer */
+	size_t subbufs_produced;	/* count of sub-buffers produced */
+	size_t subbufs_consumed;	/* count of sub-buffers consumed */
+	struct rchan *chan;		/* associated channel */
+	wait_queue_head_t read_wait;	/* reader wait queue */
+	struct timer_list timer; 	/* reader wake-up timer */
+	struct dentry *dentry;		/* channel file dentry */
+	struct kref kref;		/* channel buffer refcount */
+	struct page **page_array;	/* array of current buffer pages */
+	unsigned int page_count;	/* number of current buffer pages */
+	unsigned int finalized;		/* buffer has been finalized */
+	size_t *padding;		/* padding counts per sub-buffer */
+	size_t prev_padding;		/* temporary variable */
+	size_t bytes_consumed;		/* bytes consumed in cur read subbuf */
+	size_t early_bytes;		/* bytes consumed before VFS inited */
+	unsigned int cpu;		/* this buf's cpu */
+} ____cacheline_aligned;
+
+/*
+ * Relay channel data structure
+ */
+struct rchan
+{
+	u32 version;			/* the version of this struct */
+	size_t subbuf_size;		/* sub-buffer size */
+	size_t n_subbufs;		/* number of sub-buffers per buffer */
+	size_t alloc_size;		/* total buffer size allocated */
+	struct rchan_callbacks *cb;	/* client callbacks */
+	struct kref kref;		/* channel refcount */
+	void *private_data;		/* for user-defined data */
+	size_t last_toobig;		/* tried to log event > subbuf size */
+	struct rchan_buf *buf[NR_CPUS]; /* per-cpu channel buffers */
+	int is_global;			/* One global buffer ? */
+	struct list_head list;		/* for channel list */
+	struct dentry *parent;		/* parent dentry passed to open */
+	int has_base_filename;		/* has a filename associated? */
+	char base_filename[NAME_MAX];	/* saved base filename */
+};
+
+/*
+ * Relay channel client callbacks
+ */
+struct rchan_callbacks
+{
+	/*
+	 * subbuf_start - called on buffer-switch to a new sub-buffer
+	 * @buf: the channel buffer containing the new sub-buffer
+	 * @subbuf: the start of the new sub-buffer
+	 * @prev_subbuf: the start of the previous sub-buffer
+	 * @prev_padding: unused space at the end of previous sub-buffer
+	 *
+	 * The client should return 1 to continue logging, 0 to stop
+	 * logging.
+	 *
+	 * NOTE: subbuf_start will also be invoked when the buffer is
+	 *       created, so that the first sub-buffer can be initialized
+	 *       if necessary.  In this case, prev_subbuf will be NULL.
+	 *
+	 * NOTE: the client can reserve bytes at the beginning of the new
+	 *       sub-buffer by calling subbuf_start_reserve() in this callback.
+	 */
+	int (*subbuf_start) (struct rchan_buf *buf,
+			     void *subbuf,
+			     void *prev_subbuf,
+			     size_t prev_padding);
+
+	/*
+	 * buf_mapped - relay buffer mmap notification
+	 * @buf: the channel buffer
+	 * @filp: relay file pointer
+	 *
+	 * Called when a relay file is successfully mmapped
+	 */
+        void (*buf_mapped)(struct rchan_buf *buf,
+			   struct file *filp);
+
+	/*
+	 * buf_unmapped - relay buffer unmap notification
+	 * @buf: the channel buffer
+	 * @filp: relay file pointer
+	 *
+	 * Called when a relay file is successfully unmapped
+	 */
+        void (*buf_unmapped)(struct rchan_buf *buf,
+			     struct file *filp);
+	/*
+	 * create_buf_file - create file to represent a relay channel buffer
+	 * @filename: the name of the file to create
+	 * @parent: the parent of the file to create
+	 * @mode: the mode of the file to create
+	 * @buf: the channel buffer
+	 * @is_global: outparam - set non-zero if the buffer should be global
+	 *
+	 * Called during relay_open(), once for each per-cpu buffer,
+	 * to allow the client to create a file to be used to
+	 * represent the corresponding channel buffer.  If the file is
+	 * created outside of relay, the parent must also exist in
+	 * that filesystem.
+	 *
+	 * The callback should return the dentry of the file created
+	 * to represent the relay buffer.
+	 *
+	 * Setting the is_global outparam to a non-zero value will
+	 * cause relay_open() to create a single global buffer rather
+	 * than the default set of per-cpu buffers.
+	 *
+	 * See Documentation/filesystems/relay.txt for more info.
+	 */
+	struct dentry *(*create_buf_file)(const char *filename,
+					  struct dentry *parent,
+					  umode_t mode,
+					  struct rchan_buf *buf,
+					  int *is_global);
+
+	/*
+	 * remove_buf_file - remove file representing a relay channel buffer
+	 * @dentry: the dentry of the file to remove
+	 *
+	 * Called during relay_close(), once for each per-cpu buffer,
+	 * to allow the client to remove a file used to represent a
+	 * channel buffer.
+	 *
+	 * The callback should return 0 if successful, negative if not.
+	 */
+	int (*remove_buf_file)(struct dentry *dentry);
+};
+
+/*
+ * CONFIG_RELAY kernel API, kernel/relay.c
+ */
+
+struct rchan *relay_open(const char *base_filename,
+			 struct dentry *parent,
+			 size_t subbuf_size,
+			 size_t n_subbufs,
+			 struct rchan_callbacks *cb,
+			 void *private_data);
+extern int relay_late_setup_files(struct rchan *chan,
+				  const char *base_filename,
+				  struct dentry *parent);
+extern void relay_close(struct rchan *chan);
+extern void relay_flush(struct rchan *chan);
+extern void relay_subbufs_consumed(struct rchan *chan,
+				   unsigned int cpu,
+				   size_t consumed);
+extern void relay_reset(struct rchan *chan);
+extern int relay_buf_full(struct rchan_buf *buf);
+
+extern size_t relay_switch_subbuf(struct rchan_buf *buf,
+				  size_t length);
+
+/**
+ *	relay_write - write data into the channel
+ *	@chan: relay channel
+ *	@data: data to be written
+ *	@length: number of bytes to write
+ *
+ *	Writes data into the current cpu's channel buffer.
+ *
+ *	Protects the buffer by disabling interrupts.  Use this
+ *	if you might be logging from interrupt context.  Try
+ *	__relay_write() if you know you	won't be logging from
+ *	interrupt context.
+ */
+static inline void relay_write(struct rchan *chan,
+			       const void *data,
+			       size_t length)
+{
+	unsigned long flags;
+	struct rchan_buf *buf;
+
+	local_irq_save(flags);
+	buf = chan->buf[smp_processor_id()];
+	if (unlikely(buf->offset + length > chan->subbuf_size))
+		length = relay_switch_subbuf(buf, length);
+	memcpy(buf->data + buf->offset, data, length);
+	buf->offset += length;
+	local_irq_restore(flags);
+}
+
+/**
+ *	__relay_write - write data into the channel
+ *	@chan: relay channel
+ *	@data: data to be written
+ *	@length: number of bytes to write
+ *
+ *	Writes data into the current cpu's channel buffer.
+ *
+ *	Protects the buffer by disabling preemption.  Use
+ *	relay_write() if you might be logging from interrupt
+ *	context.
+ */
+static inline void __relay_write(struct rchan *chan,
+				 const void *data,
+				 size_t length)
+{
+	struct rchan_buf *buf;
+
+	buf = chan->buf[get_cpu()];
+	if (unlikely(buf->offset + length > buf->chan->subbuf_size))
+		length = relay_switch_subbuf(buf, length);
+	memcpy(buf->data + buf->offset, data, length);
+	buf->offset += length;
+	put_cpu();
+}
+
+/**
+ *	relay_reserve - reserve slot in channel buffer
+ *	@chan: relay channel
+ *	@length: number of bytes to reserve
+ *
+ *	Returns pointer to reserved slot, NULL if full.
+ *
+ *	Reserves a slot in the current cpu's channel buffer.
+ *	Does not protect the buffer at all - caller must provide
+ *	appropriate synchronization.
+ */
+static inline void *relay_reserve(struct rchan *chan, size_t length)
+{
+	void *reserved;
+	struct rchan_buf *buf = chan->buf[smp_processor_id()];
+
+	if (unlikely(buf->offset + length > buf->chan->subbuf_size)) {
+		length = relay_switch_subbuf(buf, length);
+		if (!length)
+			return NULL;
+	}
+	reserved = buf->data + buf->offset;
+	buf->offset += length;
+
+	return reserved;
+}
+
+/**
+ *	subbuf_start_reserve - reserve bytes at the start of a sub-buffer
+ *	@buf: relay channel buffer
+ *	@length: number of bytes to reserve
+ *
+ *	Helper function used to reserve bytes at the beginning of
+ *	a sub-buffer in the subbuf_start() callback.
+ */
+static inline void subbuf_start_reserve(struct rchan_buf *buf,
+					size_t length)
+{
+	BUG_ON(length >= buf->chan->subbuf_size - 1);
+	buf->offset = length;
+}
+
+/*
+ * exported relay file operations, kernel/relay.c
+ */
+extern const struct file_operations relay_file_operations;
+
+#endif /* _LINUX_RELAY_H */
+
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
new file mode 100644
index 00000000..f1ffabb9
--- /dev/null
+++ b/include/linux/remoteproc.h
@@ -0,0 +1,478 @@
+/*
+ * Remote Processor Framework
+ *
+ * Copyright(c) 2011 Texas Instruments, Inc.
+ * Copyright(c) 2011 Google, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in
+ *   the documentation and/or other materials provided with the
+ *   distribution.
+ * * Neither the name Texas Instruments nor the names of its
+ *   contributors may be used to endorse or promote products derived
+ *   from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef REMOTEPROC_H
+#define REMOTEPROC_H
+
+#include <linux/types.h>
+#include <linux/kref.h>
+#include <linux/klist.h>
+#include <linux/mutex.h>
+#include <linux/virtio.h>
+#include <linux/completion.h>
+#include <linux/idr.h>
+
+/**
+ * struct resource_table - firmware resource table header
+ * @ver: version number
+ * @num: number of resource entries
+ * @reserved: reserved (must be zero)
+ * @offset: array of offsets pointing at the various resource entries
+ *
+ * A resource table is essentially a list of system resources required
+ * by the remote processor. It may also include configuration entries.
+ * If needed, the remote processor firmware should contain this table
+ * as a dedicated ".resource_table" ELF section.
+ *
+ * Some resources entries are mere announcements, where the host is informed
+ * of specific remoteproc configuration. Other entries require the host to
+ * do something (e.g. allocate a system resource). Sometimes a negotiation
+ * is expected, where the firmware requests a resource, and once allocated,
+ * the host should provide back its details (e.g. address of an allocated
+ * memory region).
+ *
+ * The header of the resource table, as expressed by this structure,
+ * contains a version number (should we need to change this format in the
+ * future), the number of available resource entries, and their offsets
+ * in the table.
+ *
+ * Immediately following this header are the resource entries themselves,
+ * each of which begins with a resource entry header (as described below).
+ */
+struct resource_table {
+	u32 ver;
+	u32 num;
+	u32 reserved[2];
+	u32 offset[0];
+} __packed;
+
+/**
+ * struct fw_rsc_hdr - firmware resource entry header
+ * @type: resource type
+ * @data: resource data
+ *
+ * Every resource entry begins with a 'struct fw_rsc_hdr' header providing
+ * its @type. The content of the entry itself will immediately follow
+ * this header, and it should be parsed according to the resource type.
+ */
+struct fw_rsc_hdr {
+	u32 type;
+	u8 data[0];
+} __packed;
+
+/**
+ * enum fw_resource_type - types of resource entries
+ *
+ * @RSC_CARVEOUT:   request for allocation of a physically contiguous
+ *		    memory region.
+ * @RSC_DEVMEM:     request to iommu_map a memory-based peripheral.
+ * @RSC_TRACE:	    announces the availability of a trace buffer into which
+ *		    the remote processor will be writing logs.
+ * @RSC_VDEV:       declare support for a virtio device, and serve as its
+ *		    virtio header.
+ * @RSC_LAST:       just keep this one at the end
+ *
+ * For more details regarding a specific resource type, please see its
+ * dedicated structure below.
+ *
+ * Please note that these values are used as indices to the rproc_handle_rsc
+ * lookup table, so please keep them sane. Moreover, @RSC_LAST is used to
+ * check the validity of an index before the lookup table is accessed, so
+ * please update it as needed.
+ */
+enum fw_resource_type {
+	RSC_CARVEOUT	= 0,
+	RSC_DEVMEM	= 1,
+	RSC_TRACE	= 2,
+	RSC_VDEV	= 3,
+	RSC_LAST	= 4,
+};
+
+#define FW_RSC_ADDR_ANY (0xFFFFFFFFFFFFFFFF)
+
+/**
+ * struct fw_rsc_carveout - physically contiguous memory request
+ * @da: device address
+ * @pa: physical address
+ * @len: length (in bytes)
+ * @flags: iommu protection flags
+ * @reserved: reserved (must be zero)
+ * @name: human-readable name of the requested memory region
+ *
+ * This resource entry requests the host to allocate a physically contiguous
+ * memory region.
+ *
+ * These request entries should precede other firmware resource entries,
+ * as other entries might request placing other data objects inside
+ * these memory regions (e.g. data/code segments, trace resource entries, ...).
+ *
+ * Allocating memory this way helps utilizing the reserved physical memory
+ * (e.g. CMA) more efficiently, and also minimizes the number of TLB entries
+ * needed to map it (in case @rproc is using an IOMMU). Reducing the TLB
+ * pressure is important; it may have a substantial impact on performance.
+ *
+ * If the firmware is compiled with static addresses, then @da should specify
+ * the expected device address of this memory region. If @da is set to
+ * FW_RSC_ADDR_ANY, then the host will dynamically allocate it, and then
+ * overwrite @da with the dynamically allocated address.
+ *
+ * We will always use @da to negotiate the device addresses, even if it
+ * isn't using an iommu. In that case, though, it will obviously contain
+ * physical addresses.
+ *
+ * Some remote processors needs to know the allocated physical address
+ * even if they do use an iommu. This is needed, e.g., if they control
+ * hardware accelerators which access the physical memory directly (this
+ * is the case with OMAP4 for instance). In that case, the host will
+ * overwrite @pa with the dynamically allocated physical address.
+ * Generally we don't want to expose physical addresses if we don't have to
+ * (remote processors are generally _not_ trusted), so we might want to
+ * change this to happen _only_ when explicitly required by the hardware.
+ *
+ * @flags is used to provide IOMMU protection flags, and @name should
+ * (optionally) contain a human readable name of this carveout region
+ * (mainly for debugging purposes).
+ */
+struct fw_rsc_carveout {
+	u32 da;
+	u32 pa;
+	u32 len;
+	u32 flags;
+	u32 reserved;
+	u8 name[32];
+} __packed;
+
+/**
+ * struct fw_rsc_devmem - iommu mapping request
+ * @da: device address
+ * @pa: physical address
+ * @len: length (in bytes)
+ * @flags: iommu protection flags
+ * @reserved: reserved (must be zero)
+ * @name: human-readable name of the requested region to be mapped
+ *
+ * This resource entry requests the host to iommu map a physically contiguous
+ * memory region. This is needed in case the remote processor requires
+ * access to certain memory-based peripherals; _never_ use it to access
+ * regular memory.
+ *
+ * This is obviously only needed if the remote processor is accessing memory
+ * via an iommu.
+ *
+ * @da should specify the required device address, @pa should specify
+ * the physical address we want to map, @len should specify the size of
+ * the mapping and @flags is the IOMMU protection flags. As always, @name may
+ * (optionally) contain a human readable name of this mapping (mainly for
+ * debugging purposes).
+ *
+ * Note: at this point we just "trust" those devmem entries to contain valid
+ * physical addresses, but this isn't safe and will be changed: eventually we
+ * want remoteproc implementations to provide us ranges of physical addresses
+ * the firmware is allowed to request, and not allow firmwares to request
+ * access to physical addresses that are outside those ranges.
+ */
+struct fw_rsc_devmem {
+	u32 da;
+	u32 pa;
+	u32 len;
+	u32 flags;
+	u32 reserved;
+	u8 name[32];
+} __packed;
+
+/**
+ * struct fw_rsc_trace - trace buffer declaration
+ * @da: device address
+ * @len: length (in bytes)
+ * @reserved: reserved (must be zero)
+ * @name: human-readable name of the trace buffer
+ *
+ * This resource entry provides the host information about a trace buffer
+ * into which the remote processor will write log messages.
+ *
+ * @da specifies the device address of the buffer, @len specifies
+ * its size, and @name may contain a human readable name of the trace buffer.
+ *
+ * After booting the remote processor, the trace buffers are exposed to the
+ * user via debugfs entries (called trace0, trace1, etc..).
+ */
+struct fw_rsc_trace {
+	u32 da;
+	u32 len;
+	u32 reserved;
+	u8 name[32];
+} __packed;
+
+/**
+ * struct fw_rsc_vdev_vring - vring descriptor entry
+ * @da: device address
+ * @align: the alignment between the consumer and producer parts of the vring
+ * @num: num of buffers supported by this vring (must be power of two)
+ * @notifyid is a unique rproc-wide notify index for this vring. This notify
+ * index is used when kicking a remote processor, to let it know that this
+ * vring is triggered.
+ * @reserved: reserved (must be zero)
+ *
+ * This descriptor is not a resource entry by itself; it is part of the
+ * vdev resource type (see below).
+ *
+ * Note that @da should either contain the device address where
+ * the remote processor is expecting the vring, or indicate that
+ * dynamically allocation of the vring's device address is supported.
+ */
+struct fw_rsc_vdev_vring {
+	u32 da;
+	u32 align;
+	u32 num;
+	u32 notifyid;
+	u32 reserved;
+} __packed;
+
+/**
+ * struct fw_rsc_vdev - virtio device header
+ * @id: virtio device id (as in virtio_ids.h)
+ * @notifyid is a unique rproc-wide notify index for this vdev. This notify
+ * index is used when kicking a remote processor, to let it know that the
+ * status/features of this vdev have changes.
+ * @dfeatures specifies the virtio device features supported by the firmware
+ * @gfeatures is a place holder used by the host to write back the
+ * negotiated features that are supported by both sides.
+ * @config_len is the size of the virtio config space of this vdev. The config
+ * space lies in the resource table immediate after this vdev header.
+ * @status is a place holder where the host will indicate its virtio progress.
+ * @num_of_vrings indicates how many vrings are described in this vdev header
+ * @reserved: reserved (must be zero)
+ * @vring is an array of @num_of_vrings entries of 'struct fw_rsc_vdev_vring'.
+ *
+ * This resource is a virtio device header: it provides information about
+ * the vdev, and is then used by the host and its peer remote processors
+ * to negotiate and share certain virtio properties.
+ *
+ * By providing this resource entry, the firmware essentially asks remoteproc
+ * to statically allocate a vdev upon registration of the rproc (dynamic vdev
+ * allocation is not yet supported).
+ *
+ * Note: unlike virtualization systems, the term 'host' here means
+ * the Linux side which is running remoteproc to control the remote
+ * processors. We use the name 'gfeatures' to comply with virtio's terms,
+ * though there isn't really any virtualized guest OS here: it's the host
+ * which is responsible for negotiating the final features.
+ * Yeah, it's a bit confusing.
+ *
+ * Note: immediately following this structure is the virtio config space for
+ * this vdev (which is specific to the vdev; for more info, read the virtio
+ * spec). the size of the config space is specified by @config_len.
+ */
+struct fw_rsc_vdev {
+	u32 id;
+	u32 notifyid;
+	u32 dfeatures;
+	u32 gfeatures;
+	u32 config_len;
+	u8 status;
+	u8 num_of_vrings;
+	u8 reserved[2];
+	struct fw_rsc_vdev_vring vring[0];
+} __packed;
+
+/**
+ * struct rproc_mem_entry - memory entry descriptor
+ * @va:	virtual address
+ * @dma: dma address
+ * @len: length, in bytes
+ * @da: device address
+ * @priv: associated data
+ * @node: list node
+ */
+struct rproc_mem_entry {
+	void *va;
+	dma_addr_t dma;
+	int len;
+	u32 da;
+	void *priv;
+	struct list_head node;
+};
+
+struct rproc;
+
+/**
+ * struct rproc_ops - platform-specific device handlers
+ * @start:	power on the device and boot it
+ * @stop:	power off the device
+ * @kick:	kick a virtqueue (virtqueue id given as a parameter)
+ */
+struct rproc_ops {
+	int (*start)(struct rproc *rproc);
+	int (*stop)(struct rproc *rproc);
+	void (*kick)(struct rproc *rproc, int vqid);
+};
+
+/**
+ * enum rproc_state - remote processor states
+ * @RPROC_OFFLINE:	device is powered off
+ * @RPROC_SUSPENDED:	device is suspended; needs to be woken up to receive
+ *			a message.
+ * @RPROC_RUNNING:	device is up and running
+ * @RPROC_CRASHED:	device has crashed; need to start recovery
+ * @RPROC_LAST:		just keep this one at the end
+ *
+ * Please note that the values of these states are used as indices
+ * to rproc_state_string, a state-to-name lookup table,
+ * so please keep the two synchronized. @RPROC_LAST is used to check
+ * the validity of an index before the lookup table is accessed, so
+ * please update it as needed too.
+ */
+enum rproc_state {
+	RPROC_OFFLINE	= 0,
+	RPROC_SUSPENDED	= 1,
+	RPROC_RUNNING	= 2,
+	RPROC_CRASHED	= 3,
+	RPROC_LAST	= 4,
+};
+
+/**
+ * struct rproc - represents a physical remote processor device
+ * @node: klist node of this rproc object
+ * @domain: iommu domain
+ * @name: human readable name of the rproc
+ * @firmware: name of firmware file to be loaded
+ * @priv: private data which belongs to the platform-specific rproc module
+ * @ops: platform-specific start/stop rproc handlers
+ * @dev: underlying device
+ * @refcount: refcount of users that have a valid pointer to this rproc
+ * @power: refcount of users who need this rproc powered up
+ * @state: state of the device
+ * @lock: lock which protects concurrent manipulations of the rproc
+ * @dbg_dir: debugfs directory of this rproc device
+ * @traces: list of trace buffers
+ * @num_traces: number of trace buffers
+ * @carveouts: list of physically contiguous memory allocations
+ * @mappings: list of iommu mappings we initiated, needed on shutdown
+ * @firmware_loading_complete: marks e/o asynchronous firmware loading
+ * @bootaddr: address of first instruction to boot rproc with (optional)
+ * @rvdevs: list of remote virtio devices
+ * @notifyids: idr for dynamically assigning rproc-wide unique notify ids
+ */
+struct rproc {
+	struct klist_node node;
+	struct iommu_domain *domain;
+	const char *name;
+	const char *firmware;
+	void *priv;
+	const struct rproc_ops *ops;
+	struct device *dev;
+	struct kref refcount;
+	atomic_t power;
+	unsigned int state;
+	struct mutex lock;
+	struct dentry *dbg_dir;
+	struct list_head traces;
+	int num_traces;
+	struct list_head carveouts;
+	struct list_head mappings;
+	struct completion firmware_loading_complete;
+	u32 bootaddr;
+	struct list_head rvdevs;
+	struct idr notifyids;
+};
+
+/* we currently support only two vrings per rvdev */
+#define RVDEV_NUM_VRINGS 2
+
+/**
+ * struct rproc_vring - remoteproc vring state
+ * @va:	virtual address
+ * @dma: dma address
+ * @len: length, in bytes
+ * @da: device address
+ * @align: vring alignment
+ * @notifyid: rproc-specific unique vring index
+ * @rvdev: remote vdev
+ * @vq: the virtqueue of this vring
+ */
+struct rproc_vring {
+	void *va;
+	dma_addr_t dma;
+	int len;
+	u32 da;
+	u32 align;
+	int notifyid;
+	struct rproc_vdev *rvdev;
+	struct virtqueue *vq;
+};
+
+/**
+ * struct rproc_vdev - remoteproc state for a supported virtio device
+ * @node: list node
+ * @rproc: the rproc handle
+ * @vdev: the virio device
+ * @vring: the vrings for this vdev
+ * @dfeatures: virtio device features
+ * @gfeatures: virtio guest features
+ */
+struct rproc_vdev {
+	struct list_head node;
+	struct rproc *rproc;
+	struct virtio_device vdev;
+	struct rproc_vring vring[RVDEV_NUM_VRINGS];
+	unsigned long dfeatures;
+	unsigned long gfeatures;
+};
+
+struct rproc *rproc_get_by_name(const char *name);
+void rproc_put(struct rproc *rproc);
+
+struct rproc *rproc_alloc(struct device *dev, const char *name,
+				const struct rproc_ops *ops,
+				const char *firmware, int len);
+void rproc_free(struct rproc *rproc);
+int rproc_register(struct rproc *rproc);
+int rproc_unregister(struct rproc *rproc);
+
+int rproc_boot(struct rproc *rproc);
+void rproc_shutdown(struct rproc *rproc);
+
+static inline struct rproc_vdev *vdev_to_rvdev(struct virtio_device *vdev)
+{
+	return container_of(vdev, struct rproc_vdev, vdev);
+}
+
+static inline struct rproc *vdev_to_rproc(struct virtio_device *vdev)
+{
+	struct rproc_vdev *rvdev = vdev_to_rvdev(vdev);
+
+	return rvdev->rproc;
+}
+
+#endif /* REMOTEPROC_H */
diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h
new file mode 100644
index 00000000..da81af08
--- /dev/null
+++ b/include/linux/res_counter.h
@@ -0,0 +1,226 @@
+#ifndef __RES_COUNTER_H__
+#define __RES_COUNTER_H__
+
+/*
+ * Resource Counters
+ * Contain common data types and routines for resource accounting
+ *
+ * Copyright 2007 OpenVZ SWsoft Inc
+ *
+ * Author: Pavel Emelianov <xemul@openvz.org>
+ *
+ * See Documentation/cgroups/resource_counter.txt for more
+ * info about what this counter is.
+ */
+
+#include <linux/cgroup.h>
+
+/*
+ * The core object. the cgroup that wishes to account for some
+ * resource may include this counter into its structures and use
+ * the helpers described beyond
+ */
+
+struct res_counter {
+	/*
+	 * the current resource consumption level
+	 */
+	unsigned long long usage;
+	/*
+	 * the maximal value of the usage from the counter creation
+	 */
+	unsigned long long max_usage;
+	/*
+	 * the limit that usage cannot exceed
+	 */
+	unsigned long long limit;
+	/*
+	 * the limit that usage can be exceed
+	 */
+	unsigned long long soft_limit;
+	/*
+	 * the number of unsuccessful attempts to consume the resource
+	 */
+	unsigned long long failcnt;
+	/*
+	 * the lock to protect all of the above.
+	 * the routines below consider this to be IRQ-safe
+	 */
+	spinlock_t lock;
+	/*
+	 * Parent counter, used for hierarchial resource accounting
+	 */
+	struct res_counter *parent;
+};
+
+#define RESOURCE_MAX (unsigned long long)LLONG_MAX
+
+/**
+ * Helpers to interact with userspace
+ * res_counter_read_u64() - returns the value of the specified member.
+ * res_counter_read/_write - put/get the specified fields from the
+ * res_counter struct to/from the user
+ *
+ * @counter:     the counter in question
+ * @member:  the field to work with (see RES_xxx below)
+ * @buf:     the buffer to opeate on,...
+ * @nbytes:  its size...
+ * @pos:     and the offset.
+ */
+
+u64 res_counter_read_u64(struct res_counter *counter, int member);
+
+ssize_t res_counter_read(struct res_counter *counter, int member,
+		const char __user *buf, size_t nbytes, loff_t *pos,
+		int (*read_strategy)(unsigned long long val, char *s));
+
+typedef int (*write_strategy_fn)(const char *buf, unsigned long long *val);
+
+int res_counter_memparse_write_strategy(const char *buf,
+					unsigned long long *res);
+
+int res_counter_write(struct res_counter *counter, int member,
+		      const char *buffer, write_strategy_fn write_strategy);
+
+/*
+ * the field descriptors. one for each member of res_counter
+ */
+
+enum {
+	RES_USAGE,
+	RES_MAX_USAGE,
+	RES_LIMIT,
+	RES_FAILCNT,
+	RES_SOFT_LIMIT,
+};
+
+/*
+ * helpers for accounting
+ */
+
+void res_counter_init(struct res_counter *counter, struct res_counter *parent);
+
+/*
+ * charge - try to consume more resource.
+ *
+ * @counter: the counter
+ * @val: the amount of the resource. each controller defines its own
+ *       units, e.g. numbers, bytes, Kbytes, etc
+ *
+ * returns 0 on success and <0 if the counter->usage will exceed the
+ * counter->limit _locked call expects the counter->lock to be taken
+ *
+ * charge_nofail works the same, except that it charges the resource
+ * counter unconditionally, and returns < 0 if the after the current
+ * charge we are over limit.
+ */
+
+int __must_check res_counter_charge_locked(struct res_counter *counter,
+		unsigned long val);
+int __must_check res_counter_charge(struct res_counter *counter,
+		unsigned long val, struct res_counter **limit_fail_at);
+int __must_check res_counter_charge_nofail(struct res_counter *counter,
+		unsigned long val, struct res_counter **limit_fail_at);
+
+/*
+ * uncharge - tell that some portion of the resource is released
+ *
+ * @counter: the counter
+ * @val: the amount of the resource
+ *
+ * these calls check for usage underflow and show a warning on the console
+ * _locked call expects the counter->lock to be taken
+ */
+
+void res_counter_uncharge_locked(struct res_counter *counter, unsigned long val);
+void res_counter_uncharge(struct res_counter *counter, unsigned long val);
+
+/**
+ * res_counter_margin - calculate chargeable space of a counter
+ * @cnt: the counter
+ *
+ * Returns the difference between the hard limit and the current usage
+ * of resource counter @cnt.
+ */
+static inline unsigned long long res_counter_margin(struct res_counter *cnt)
+{
+	unsigned long long margin;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cnt->lock, flags);
+	if (cnt->limit > cnt->usage)
+		margin = cnt->limit - cnt->usage;
+	else
+		margin = 0;
+	spin_unlock_irqrestore(&cnt->lock, flags);
+	return margin;
+}
+
+/**
+ * Get the difference between the usage and the soft limit
+ * @cnt: The counter
+ *
+ * Returns 0 if usage is less than or equal to soft limit
+ * The difference between usage and soft limit, otherwise.
+ */
+static inline unsigned long long
+res_counter_soft_limit_excess(struct res_counter *cnt)
+{
+	unsigned long long excess;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cnt->lock, flags);
+	if (cnt->usage <= cnt->soft_limit)
+		excess = 0;
+	else
+		excess = cnt->usage - cnt->soft_limit;
+	spin_unlock_irqrestore(&cnt->lock, flags);
+	return excess;
+}
+
+static inline void res_counter_reset_max(struct res_counter *cnt)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cnt->lock, flags);
+	cnt->max_usage = cnt->usage;
+	spin_unlock_irqrestore(&cnt->lock, flags);
+}
+
+static inline void res_counter_reset_failcnt(struct res_counter *cnt)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cnt->lock, flags);
+	cnt->failcnt = 0;
+	spin_unlock_irqrestore(&cnt->lock, flags);
+}
+
+static inline int res_counter_set_limit(struct res_counter *cnt,
+		unsigned long long limit)
+{
+	unsigned long flags;
+	int ret = -EBUSY;
+
+	spin_lock_irqsave(&cnt->lock, flags);
+	if (cnt->usage <= limit) {
+		cnt->limit = limit;
+		ret = 0;
+	}
+	spin_unlock_irqrestore(&cnt->lock, flags);
+	return ret;
+}
+
+static inline int
+res_counter_set_soft_limit(struct res_counter *cnt,
+				unsigned long long soft_limit)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cnt->lock, flags);
+	cnt->soft_limit = soft_limit;
+	spin_unlock_irqrestore(&cnt->lock, flags);
+	return 0;
+}
+
+#endif
diff --git a/include/linux/resource.h b/include/linux/resource.h
new file mode 100644
index 00000000..d01c96c1
--- /dev/null
+++ b/include/linux/resource.h
@@ -0,0 +1,89 @@
+#ifndef _LINUX_RESOURCE_H
+#define _LINUX_RESOURCE_H
+
+#include <linux/time.h>
+#include <linux/types.h>
+
+/*
+ * Resource control/accounting header file for linux
+ */
+
+/*
+ * Definition of struct rusage taken from BSD 4.3 Reno
+ * 
+ * We don't support all of these yet, but we might as well have them....
+ * Otherwise, each time we add new items, programs which depend on this
+ * structure will lose.  This reduces the chances of that happening.
+ */
+#define	RUSAGE_SELF	0
+#define	RUSAGE_CHILDREN	(-1)
+#define RUSAGE_BOTH	(-2)		/* sys_wait4() uses this */
+#define	RUSAGE_THREAD	1		/* only the calling thread */
+
+struct	rusage {
+	struct timeval ru_utime;	/* user time used */
+	struct timeval ru_stime;	/* system time used */
+	long	ru_maxrss;		/* maximum resident set size */
+	long	ru_ixrss;		/* integral shared memory size */
+	long	ru_idrss;		/* integral unshared data size */
+	long	ru_isrss;		/* integral unshared stack size */
+	long	ru_minflt;		/* page reclaims */
+	long	ru_majflt;		/* page faults */
+	long	ru_nswap;		/* swaps */
+	long	ru_inblock;		/* block input operations */
+	long	ru_oublock;		/* block output operations */
+	long	ru_msgsnd;		/* messages sent */
+	long	ru_msgrcv;		/* messages received */
+	long	ru_nsignals;		/* signals received */
+	long	ru_nvcsw;		/* voluntary context switches */
+	long	ru_nivcsw;		/* involuntary " */
+};
+
+struct rlimit {
+	unsigned long	rlim_cur;
+	unsigned long	rlim_max;
+};
+
+#define RLIM64_INFINITY		(~0ULL)
+
+struct rlimit64 {
+	__u64 rlim_cur;
+	__u64 rlim_max;
+};
+
+#define	PRIO_MIN	(-20)
+#define	PRIO_MAX	20
+
+#define	PRIO_PROCESS	0
+#define	PRIO_PGRP	1
+#define	PRIO_USER	2
+
+/*
+ * Limit the stack by to some sane default: root can always
+ * increase this limit if needed..  8MB seems reasonable.
+ */
+#define _STK_LIM	(8*1024*1024)
+
+/*
+ * GPG2 wants 64kB of mlocked memory, to make sure pass phrases
+ * and other sensitive information are never written to disk.
+ */
+#define MLOCK_LIMIT	((PAGE_SIZE > 64*1024) ? PAGE_SIZE : 64*1024)
+
+/*
+ * Due to binary compatibility, the actual resource numbers
+ * may be different for different linux versions..
+ */
+#include <asm/resource.h>
+
+#ifdef __KERNEL__
+
+struct task_struct;
+
+int getrusage(struct task_struct *p, int who, struct rusage __user *ru);
+int do_prlimit(struct task_struct *tsk, unsigned int resource,
+		struct rlimit *new_rlim, struct rlimit *old_rlim);
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/linux/resume-trace.h b/include/linux/resume-trace.h
new file mode 100644
index 00000000..f31db236
--- /dev/null
+++ b/include/linux/resume-trace.h
@@ -0,0 +1,34 @@
+#ifndef RESUME_TRACE_H
+#define RESUME_TRACE_H
+
+#ifdef CONFIG_PM_TRACE
+#include <asm/resume-trace.h>
+#include <linux/types.h>
+
+extern int pm_trace_enabled;
+
+static inline int pm_trace_is_enabled(void)
+{
+       return pm_trace_enabled;
+}
+
+struct device;
+extern void set_trace_device(struct device *);
+extern void generate_resume_trace(const void *tracedata, unsigned int user);
+extern int show_trace_dev_match(char *buf, size_t size);
+
+#define TRACE_DEVICE(dev) do { \
+	if (pm_trace_enabled) \
+		set_trace_device(dev); \
+	} while(0)
+
+#else
+
+static inline int pm_trace_is_enabled(void) { return 0; }
+
+#define TRACE_DEVICE(dev) do { } while (0)
+#define TRACE_RESUME(dev) do { } while (0)
+
+#endif
+
+#endif
diff --git a/include/linux/rfkill-gpio.h b/include/linux/rfkill-gpio.h
new file mode 100644
index 00000000..4d09f6ea
--- /dev/null
+++ b/include/linux/rfkill-gpio.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright (c) 2011, NVIDIA Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+
+#ifndef __RFKILL_GPIO_H
+#define __RFKILL_GPIO_H
+
+#include <linux/types.h>
+#include <linux/rfkill.h>
+
+/**
+ * struct rfkill_gpio_platform_data - platform data for rfkill gpio device.
+ * for unused gpio's, the expected value is -1.
+ * @name:		name for the gpio rf kill instance
+ * @reset_gpio:		GPIO which is used for reseting rfkill switch
+ * @shutdown_gpio:	GPIO which is used for shutdown of rfkill switch
+ * @power_clk_name:	[optional] name of clk to turn off while blocked
+ * @gpio_runtime_close:	clean up platform specific gpio configuration
+ * @gpio_runtime_setup:	set up platform specific gpio configuration
+ */
+
+struct rfkill_gpio_platform_data {
+	char			*name;
+	int			reset_gpio;
+	int			shutdown_gpio;
+	const char		*power_clk_name;
+	enum rfkill_type	type;
+	void	(*gpio_runtime_close)(struct platform_device *);
+	int	(*gpio_runtime_setup)(struct platform_device *);
+};
+
+#endif /* __RFKILL_GPIO_H */
diff --git a/include/linux/rfkill-regulator.h b/include/linux/rfkill-regulator.h
new file mode 100644
index 00000000..aca36bc8
--- /dev/null
+++ b/include/linux/rfkill-regulator.h
@@ -0,0 +1,48 @@
+/*
+ * rfkill-regulator.c - Regulator consumer driver for rfkill
+ *
+ * Copyright (C) 2009  Guiming Zhuo <gmzhuo@gmail.com>
+ * Copyright (C) 2011  Antonio Ospite <ospite@studenti.unina.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __LINUX_RFKILL_REGULATOR_H
+#define __LINUX_RFKILL_REGULATOR_H
+
+/*
+ * Use "vrfkill" as supply id when declaring the regulator consumer:
+ *
+ * static struct regulator_consumer_supply pcap_regulator_V6_consumers [] = {
+ * 	{ .dev_name = "rfkill-regulator.0", .supply = "vrfkill" },
+ * };
+ *
+ * If you have several regulator driven rfkill, you can append a numerical id to
+ * .dev_name as done above, and use the same id when declaring the platform
+ * device:
+ *
+ * static struct rfkill_regulator_platform_data ezx_rfkill_bt_data = {
+ * 	.name  = "ezx-bluetooth",
+ * 	.type  = RFKILL_TYPE_BLUETOOTH,
+ * };
+ *
+ * static struct platform_device a910_rfkill = {
+ * 	.name  = "rfkill-regulator",
+ * 	.id    = 0,
+ * 	.dev   = {
+ * 		.platform_data = &ezx_rfkill_bt_data,
+ * 	},
+ * };
+ */
+
+#include <linux/rfkill.h>
+
+struct rfkill_regulator_platform_data {
+	char *name;             /* the name for the rfkill switch */
+	enum rfkill_type type;  /* the type as specified in rfkill.h */
+};
+
+#endif /* __LINUX_RFKILL_REGULATOR_H */
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
new file mode 100644
index 00000000..6fdf0273
--- /dev/null
+++ b/include/linux/rfkill.h
@@ -0,0 +1,359 @@
+#ifndef __RFKILL_H
+#define __RFKILL_H
+
+/*
+ * Copyright (C) 2006 - 2007 Ivo van Doorn
+ * Copyright (C) 2007 Dmitry Torokhov
+ * Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/types.h>
+
+/* define userspace visible states */
+#define RFKILL_STATE_SOFT_BLOCKED	0
+#define RFKILL_STATE_UNBLOCKED		1
+#define RFKILL_STATE_HARD_BLOCKED	2
+
+/**
+ * enum rfkill_type - type of rfkill switch.
+ *
+ * @RFKILL_TYPE_ALL: toggles all switches (requests only - not a switch type)
+ * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device.
+ * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device.
+ * @RFKILL_TYPE_UWB: switch is on a ultra wideband device.
+ * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device.
+ * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device.
+ * @RFKILL_TYPE_GPS: switch is on a GPS device.
+ * @RFKILL_TYPE_FM: switch is on a FM radio device.
+ * @NUM_RFKILL_TYPES: number of defined rfkill types
+ */
+enum rfkill_type {
+	RFKILL_TYPE_ALL = 0,
+	RFKILL_TYPE_WLAN,
+	RFKILL_TYPE_BLUETOOTH,
+	RFKILL_TYPE_UWB,
+	RFKILL_TYPE_WIMAX,
+	RFKILL_TYPE_WWAN,
+	RFKILL_TYPE_GPS,
+	RFKILL_TYPE_FM,
+	NUM_RFKILL_TYPES,
+};
+
+/**
+ * enum rfkill_operation - operation types
+ * @RFKILL_OP_ADD: a device was added
+ * @RFKILL_OP_DEL: a device was removed
+ * @RFKILL_OP_CHANGE: a device's state changed -- userspace changes one device
+ * @RFKILL_OP_CHANGE_ALL: userspace changes all devices (of a type, or all)
+ */
+enum rfkill_operation {
+	RFKILL_OP_ADD = 0,
+	RFKILL_OP_DEL,
+	RFKILL_OP_CHANGE,
+	RFKILL_OP_CHANGE_ALL,
+};
+
+/**
+ * struct rfkill_event - events for userspace on /dev/rfkill
+ * @idx: index of dev rfkill
+ * @type: type of the rfkill struct
+ * @op: operation code
+ * @hard: hard state (0/1)
+ * @soft: soft state (0/1)
+ *
+ * Structure used for userspace communication on /dev/rfkill,
+ * used for events from the kernel and control to the kernel.
+ */
+struct rfkill_event {
+	__u32 idx;
+	__u8  type;
+	__u8  op;
+	__u8  soft, hard;
+} __attribute__((packed));
+
+/*
+ * We are planning to be backward and forward compatible with changes
+ * to the event struct, by adding new, optional, members at the end.
+ * When reading an event (whether the kernel from userspace or vice
+ * versa) we need to accept anything that's at least as large as the
+ * version 1 event size, but might be able to accept other sizes in
+ * the future.
+ *
+ * One exception is the kernel -- we already have two event sizes in
+ * that we've made the 'hard' member optional since our only option
+ * is to ignore it anyway.
+ */
+#define RFKILL_EVENT_SIZE_V1	8
+
+/* ioctl for turning off rfkill-input (if present) */
+#define RFKILL_IOC_MAGIC	'R'
+#define RFKILL_IOC_NOINPUT	1
+#define RFKILL_IOCTL_NOINPUT	_IO(RFKILL_IOC_MAGIC, RFKILL_IOC_NOINPUT)
+
+/* and that's all userspace gets */
+#ifdef __KERNEL__
+/* don't allow anyone to use these in the kernel */
+enum rfkill_user_states {
+	RFKILL_USER_STATE_SOFT_BLOCKED	= RFKILL_STATE_SOFT_BLOCKED,
+	RFKILL_USER_STATE_UNBLOCKED	= RFKILL_STATE_UNBLOCKED,
+	RFKILL_USER_STATE_HARD_BLOCKED	= RFKILL_STATE_HARD_BLOCKED,
+};
+#undef RFKILL_STATE_SOFT_BLOCKED
+#undef RFKILL_STATE_UNBLOCKED
+#undef RFKILL_STATE_HARD_BLOCKED
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+
+struct device;
+/* this is opaque */
+struct rfkill;
+
+/**
+ * struct rfkill_ops - rfkill driver methods
+ *
+ * @poll: poll the rfkill block state(s) -- only assign this method
+ *	when you need polling. When called, simply call one of the
+ *	rfkill_set{,_hw,_sw}_state family of functions. If the hw
+ *	is getting unblocked you need to take into account the return
+ *	value of those functions to make sure the software block is
+ *	properly used.
+ * @query: query the rfkill block state(s) and call exactly one of the
+ *	rfkill_set{,_hw,_sw}_state family of functions. Assign this
+ *	method if input events can cause hardware state changes to make
+ *	the rfkill core query your driver before setting a requested
+ *	block.
+ * @set_block: turn the transmitter on (blocked == false) or off
+ *	(blocked == true) -- ignore and return 0 when hard blocked.
+ *	This callback must be assigned.
+ */
+struct rfkill_ops {
+	void	(*poll)(struct rfkill *rfkill, void *data);
+	void	(*query)(struct rfkill *rfkill, void *data);
+	int	(*set_block)(void *data, bool blocked);
+};
+
+#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
+/**
+ * rfkill_alloc - allocate rfkill structure
+ * @name: name of the struct -- the string is not copied internally
+ * @parent: device that has rf switch on it
+ * @type: type of the switch (RFKILL_TYPE_*)
+ * @ops: rfkill methods
+ * @ops_data: data passed to each method
+ *
+ * This function should be called by the transmitter driver to allocate an
+ * rfkill structure. Returns %NULL on failure.
+ */
+struct rfkill * __must_check rfkill_alloc(const char *name,
+					  struct device *parent,
+					  const enum rfkill_type type,
+					  const struct rfkill_ops *ops,
+					  void *ops_data);
+
+/**
+ * rfkill_register - Register a rfkill structure.
+ * @rfkill: rfkill structure to be registered
+ *
+ * This function should be called by the transmitter driver to register
+ * the rfkill structure. Before calling this function the driver needs
+ * to be ready to service method calls from rfkill.
+ *
+ * If rfkill_init_sw_state() is not called before registration,
+ * set_block() will be called to initialize the software blocked state
+ * to a default value.
+ *
+ * If the hardware blocked state is not set before registration,
+ * it is assumed to be unblocked.
+ */
+int __must_check rfkill_register(struct rfkill *rfkill);
+
+/**
+ * rfkill_pause_polling(struct rfkill *rfkill)
+ *
+ * Pause polling -- say transmitter is off for other reasons.
+ * NOTE: not necessary for suspend/resume -- in that case the
+ * core stops polling anyway
+ */
+void rfkill_pause_polling(struct rfkill *rfkill);
+
+/**
+ * rfkill_resume_polling(struct rfkill *rfkill)
+ *
+ * Pause polling -- say transmitter is off for other reasons.
+ * NOTE: not necessary for suspend/resume -- in that case the
+ * core stops polling anyway
+ */
+void rfkill_resume_polling(struct rfkill *rfkill);
+
+
+/**
+ * rfkill_unregister - Unregister a rfkill structure.
+ * @rfkill: rfkill structure to be unregistered
+ *
+ * This function should be called by the network driver during device
+ * teardown to destroy rfkill structure. Until it returns, the driver
+ * needs to be able to service method calls.
+ */
+void rfkill_unregister(struct rfkill *rfkill);
+
+/**
+ * rfkill_destroy - free rfkill structure
+ * @rfkill: rfkill structure to be destroyed
+ *
+ * Destroys the rfkill structure.
+ */
+void rfkill_destroy(struct rfkill *rfkill);
+
+/**
+ * rfkill_set_hw_state - Set the internal rfkill hardware block state
+ * @rfkill: pointer to the rfkill class to modify.
+ * @state: the current hardware block state to set
+ *
+ * rfkill drivers that get events when the hard-blocked state changes
+ * use this function to notify the rfkill core (and through that also
+ * userspace) of the current state.  They should also use this after
+ * resume if the state could have changed.
+ *
+ * You need not (but may) call this function if poll_state is assigned.
+ *
+ * This function can be called in any context, even from within rfkill
+ * callbacks.
+ *
+ * The function returns the combined block state (true if transmitter
+ * should be blocked) so that drivers need not keep track of the soft
+ * block state -- which they might not be able to.
+ */
+bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked);
+
+/**
+ * rfkill_set_sw_state - Set the internal rfkill software block state
+ * @rfkill: pointer to the rfkill class to modify.
+ * @state: the current software block state to set
+ *
+ * rfkill drivers that get events when the soft-blocked state changes
+ * (yes, some platforms directly act on input but allow changing again)
+ * use this function to notify the rfkill core (and through that also
+ * userspace) of the current state.
+ *
+ * Drivers should also call this function after resume if the state has
+ * been changed by the user.  This only makes sense for "persistent"
+ * devices (see rfkill_init_sw_state()).
+ *
+ * This function can be called in any context, even from within rfkill
+ * callbacks.
+ *
+ * The function returns the combined block state (true if transmitter
+ * should be blocked).
+ */
+bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked);
+
+/**
+ * rfkill_init_sw_state - Initialize persistent software block state
+ * @rfkill: pointer to the rfkill class to modify.
+ * @state: the current software block state to set
+ *
+ * rfkill drivers that preserve their software block state over power off
+ * use this function to notify the rfkill core (and through that also
+ * userspace) of their initial state.  It should only be used before
+ * registration.
+ *
+ * In addition, it marks the device as "persistent", an attribute which
+ * can be read by userspace.  Persistent devices are expected to preserve
+ * their own state when suspended.
+ */
+void rfkill_init_sw_state(struct rfkill *rfkill, bool blocked);
+
+/**
+ * rfkill_set_states - Set the internal rfkill block states
+ * @rfkill: pointer to the rfkill class to modify.
+ * @sw: the current software block state to set
+ * @hw: the current hardware block state to set
+ *
+ * This function can be called in any context, even from within rfkill
+ * callbacks.
+ */
+void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw);
+
+/**
+ * rfkill_blocked - query rfkill block
+ *
+ * @rfkill: rfkill struct to query
+ */
+bool rfkill_blocked(struct rfkill *rfkill);
+#else /* !RFKILL */
+static inline struct rfkill * __must_check
+rfkill_alloc(const char *name,
+	     struct device *parent,
+	     const enum rfkill_type type,
+	     const struct rfkill_ops *ops,
+	     void *ops_data)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline int __must_check rfkill_register(struct rfkill *rfkill)
+{
+	if (rfkill == ERR_PTR(-ENODEV))
+		return 0;
+	return -EINVAL;
+}
+
+static inline void rfkill_pause_polling(struct rfkill *rfkill)
+{
+}
+
+static inline void rfkill_resume_polling(struct rfkill *rfkill)
+{
+}
+
+static inline void rfkill_unregister(struct rfkill *rfkill)
+{
+}
+
+static inline void rfkill_destroy(struct rfkill *rfkill)
+{
+}
+
+static inline bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked)
+{
+	return blocked;
+}
+
+static inline bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked)
+{
+	return blocked;
+}
+
+static inline void rfkill_init_sw_state(struct rfkill *rfkill, bool blocked)
+{
+}
+
+static inline void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw)
+{
+}
+
+static inline bool rfkill_blocked(struct rfkill *rfkill)
+{
+	return false;
+}
+#endif /* RFKILL || RFKILL_MODULE */
+
+#endif /* __KERNEL__ */
+
+#endif /* RFKILL_H */
diff --git a/include/linux/ring_buffer.h b/include/linux/ring_buffer.h
new file mode 100644
index 00000000..7be2e88f
--- /dev/null
+++ b/include/linux/ring_buffer.h
@@ -0,0 +1,191 @@
+#ifndef _LINUX_RING_BUFFER_H
+#define _LINUX_RING_BUFFER_H
+
+#include <linux/kmemcheck.h>
+#include <linux/mm.h>
+#include <linux/seq_file.h>
+
+struct ring_buffer;
+struct ring_buffer_iter;
+
+/*
+ * Don't refer to this struct directly, use functions below.
+ */
+struct ring_buffer_event {
+	kmemcheck_bitfield_begin(bitfield);
+	u32		type_len:5, time_delta:27;
+	kmemcheck_bitfield_end(bitfield);
+
+	u32		array[];
+};
+
+/**
+ * enum ring_buffer_type - internal ring buffer types
+ *
+ * @RINGBUF_TYPE_PADDING:	Left over page padding or discarded event
+ *				 If time_delta is 0:
+ *				  array is ignored
+ *				  size is variable depending on how much
+ *				  padding is needed
+ *				 If time_delta is non zero:
+ *				  array[0] holds the actual length
+ *				  size = 4 + length (bytes)
+ *
+ * @RINGBUF_TYPE_TIME_EXTEND:	Extend the time delta
+ *				 array[0] = time delta (28 .. 59)
+ *				 size = 8 bytes
+ *
+ * @RINGBUF_TYPE_TIME_STAMP:	Sync time stamp with external clock
+ *				 array[0]    = tv_nsec
+ *				 array[1..2] = tv_sec
+ *				 size = 16 bytes
+ *
+ * <= @RINGBUF_TYPE_DATA_TYPE_LEN_MAX:
+ *				Data record
+ *				 If type_len is zero:
+ *				  array[0] holds the actual length
+ *				  array[1..(length+3)/4] holds data
+ *				  size = 4 + length (bytes)
+ *				 else
+ *				  length = type_len << 2
+ *				  array[0..(length+3)/4-1] holds data
+ *				  size = 4 + length (bytes)
+ */
+enum ring_buffer_type {
+	RINGBUF_TYPE_DATA_TYPE_LEN_MAX = 28,
+	RINGBUF_TYPE_PADDING,
+	RINGBUF_TYPE_TIME_EXTEND,
+	/* FIXME: RINGBUF_TYPE_TIME_STAMP not implemented */
+	RINGBUF_TYPE_TIME_STAMP,
+};
+
+unsigned ring_buffer_event_length(struct ring_buffer_event *event);
+void *ring_buffer_event_data(struct ring_buffer_event *event);
+
+/*
+ * ring_buffer_discard_commit will remove an event that has not
+ *   ben committed yet. If this is used, then ring_buffer_unlock_commit
+ *   must not be called on the discarded event. This function
+ *   will try to remove the event from the ring buffer completely
+ *   if another event has not been written after it.
+ *
+ * Example use:
+ *
+ *  if (some_condition)
+ *    ring_buffer_discard_commit(buffer, event);
+ *  else
+ *    ring_buffer_unlock_commit(buffer, event);
+ */
+void ring_buffer_discard_commit(struct ring_buffer *buffer,
+				struct ring_buffer_event *event);
+
+/*
+ * size is in bytes for each per CPU buffer.
+ */
+struct ring_buffer *
+__ring_buffer_alloc(unsigned long size, unsigned flags, struct lock_class_key *key);
+
+/*
+ * Because the ring buffer is generic, if other users of the ring buffer get
+ * traced by ftrace, it can produce lockdep warnings. We need to keep each
+ * ring buffer's lock class separate.
+ */
+#define ring_buffer_alloc(size, flags)			\
+({							\
+	static struct lock_class_key __key;		\
+	__ring_buffer_alloc((size), (flags), &__key);	\
+})
+
+void ring_buffer_free(struct ring_buffer *buffer);
+
+int ring_buffer_resize(struct ring_buffer *buffer, unsigned long size);
+
+void ring_buffer_change_overwrite(struct ring_buffer *buffer, int val);
+
+struct ring_buffer_event *ring_buffer_lock_reserve(struct ring_buffer *buffer,
+						   unsigned long length);
+int ring_buffer_unlock_commit(struct ring_buffer *buffer,
+			      struct ring_buffer_event *event);
+int ring_buffer_write(struct ring_buffer *buffer,
+		      unsigned long length, void *data);
+
+struct ring_buffer_event *
+ring_buffer_peek(struct ring_buffer *buffer, int cpu, u64 *ts,
+		 unsigned long *lost_events);
+struct ring_buffer_event *
+ring_buffer_consume(struct ring_buffer *buffer, int cpu, u64 *ts,
+		    unsigned long *lost_events);
+
+struct ring_buffer_iter *
+ring_buffer_read_prepare(struct ring_buffer *buffer, int cpu);
+void ring_buffer_read_prepare_sync(void);
+void ring_buffer_read_start(struct ring_buffer_iter *iter);
+void ring_buffer_read_finish(struct ring_buffer_iter *iter);
+
+struct ring_buffer_event *
+ring_buffer_iter_peek(struct ring_buffer_iter *iter, u64 *ts);
+struct ring_buffer_event *
+ring_buffer_read(struct ring_buffer_iter *iter, u64 *ts);
+void ring_buffer_iter_reset(struct ring_buffer_iter *iter);
+int ring_buffer_iter_empty(struct ring_buffer_iter *iter);
+
+unsigned long ring_buffer_size(struct ring_buffer *buffer);
+
+void ring_buffer_reset_cpu(struct ring_buffer *buffer, int cpu);
+void ring_buffer_reset(struct ring_buffer *buffer);
+
+#ifdef CONFIG_RING_BUFFER_ALLOW_SWAP
+int ring_buffer_swap_cpu(struct ring_buffer *buffer_a,
+			 struct ring_buffer *buffer_b, int cpu);
+#else
+static inline int
+ring_buffer_swap_cpu(struct ring_buffer *buffer_a,
+		     struct ring_buffer *buffer_b, int cpu)
+{
+	return -ENODEV;
+}
+#endif
+
+int ring_buffer_empty(struct ring_buffer *buffer);
+int ring_buffer_empty_cpu(struct ring_buffer *buffer, int cpu);
+
+void ring_buffer_record_disable(struct ring_buffer *buffer);
+void ring_buffer_record_enable(struct ring_buffer *buffer);
+void ring_buffer_record_off(struct ring_buffer *buffer);
+void ring_buffer_record_on(struct ring_buffer *buffer);
+int ring_buffer_record_is_on(struct ring_buffer *buffer);
+void ring_buffer_record_disable_cpu(struct ring_buffer *buffer, int cpu);
+void ring_buffer_record_enable_cpu(struct ring_buffer *buffer, int cpu);
+
+unsigned long ring_buffer_oldest_event_ts(struct ring_buffer *buffer, int cpu);
+unsigned long ring_buffer_bytes_cpu(struct ring_buffer *buffer, int cpu);
+unsigned long ring_buffer_entries(struct ring_buffer *buffer);
+unsigned long ring_buffer_overruns(struct ring_buffer *buffer);
+unsigned long ring_buffer_entries_cpu(struct ring_buffer *buffer, int cpu);
+unsigned long ring_buffer_overrun_cpu(struct ring_buffer *buffer, int cpu);
+unsigned long ring_buffer_commit_overrun_cpu(struct ring_buffer *buffer, int cpu);
+
+u64 ring_buffer_time_stamp(struct ring_buffer *buffer, int cpu);
+void ring_buffer_normalize_time_stamp(struct ring_buffer *buffer,
+				      int cpu, u64 *ts);
+void ring_buffer_set_clock(struct ring_buffer *buffer,
+			   u64 (*clock)(void));
+
+size_t ring_buffer_page_len(void *page);
+
+
+void *ring_buffer_alloc_read_page(struct ring_buffer *buffer, int cpu);
+void ring_buffer_free_read_page(struct ring_buffer *buffer, void *data);
+int ring_buffer_read_page(struct ring_buffer *buffer, void **data_page,
+			  size_t len, int cpu, int full);
+
+struct trace_seq;
+
+int ring_buffer_print_entry_header(struct trace_seq *s);
+int ring_buffer_print_page_header(struct trace_seq *s);
+
+enum ring_buffer_flags {
+	RB_FL_OVERWRITE		= 1 << 0,
+};
+
+#endif /* _LINUX_RING_BUFFER_H */
diff --git a/include/linux/rio.h b/include/linux/rio.h
new file mode 100644
index 00000000..4d506111
--- /dev/null
+++ b/include/linux/rio.h
@@ -0,0 +1,405 @@
+/*
+ * RapidIO interconnect services
+ * (RapidIO Interconnect Specification, http://www.rapidio.org)
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef LINUX_RIO_H
+#define LINUX_RIO_H
+
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/rio_regs.h>
+
+#define RIO_NO_HOPCOUNT		-1
+#define RIO_INVALID_DESTID	0xffff
+
+#define RIO_MAX_MPORTS		8
+#define RIO_MAX_MPORT_RESOURCES	16
+#define RIO_MAX_DEV_RESOURCES	16
+
+#define RIO_GLOBAL_TABLE	0xff	/* Indicates access of a switch's
+					   global routing table if it
+					   has multiple (or per port)
+					   tables */
+
+#define RIO_INVALID_ROUTE	0xff	/* Indicates that a route table
+					   entry is invalid (no route
+					   exists for the device ID) */
+
+#define RIO_MAX_ROUTE_ENTRIES(size)	(size ? (1 << 16) : (1 << 8))
+#define RIO_ANY_DESTID(size)		(size ? 0xffff : 0xff)
+
+#define RIO_MAX_MBOX		4
+#define RIO_MAX_MSG_SIZE	0x1000
+
+/*
+ * Error values that may be returned by RIO functions.
+ */
+#define RIO_SUCCESSFUL			0x00
+#define RIO_BAD_SIZE			0x81
+
+/*
+ * For RIO devices, the region numbers are assigned this way:
+ *
+ *	0	RapidIO outbound doorbells
+ *      1-15	RapidIO memory regions
+ *
+ * For RIO master ports, the region number are assigned this way:
+ *
+ *	0	RapidIO inbound doorbells
+ *	1	RapidIO inbound mailboxes
+ *	1	RapidIO outbound mailboxes
+ */
+#define RIO_DOORBELL_RESOURCE	0
+#define RIO_INB_MBOX_RESOURCE	1
+#define RIO_OUTB_MBOX_RESOURCE	2
+
+#define RIO_PW_MSG_SIZE		64
+
+/*
+ * A component tag value (stored in the component tag CSR) is used as device's
+ * unique identifier assigned during enumeration. Besides being used for
+ * identifying switches (which do not have device ID register), it also is used
+ * by error management notification and therefore has to be assigned
+ * to endpoints as well.
+ */
+#define RIO_CTAG_RESRVD	0xfffe0000 /* Reserved */
+#define RIO_CTAG_UDEVID	0x0001ffff /* Unique device identifier */
+
+extern struct bus_type rio_bus_type;
+extern struct device rio_bus;
+extern struct list_head rio_devices;	/* list of all devices */
+
+struct rio_mport;
+struct rio_dev;
+union rio_pw_msg;
+
+/**
+ * struct rio_switch - RIO switch info
+ * @node: Node in global list of switches
+ * @switchid: Switch ID that is unique across a network
+ * @route_table: Copy of switch routing table
+ * @port_ok: Status of each port (one bit per port) - OK=1 or UNINIT=0
+ * @add_entry: Callback for switch-specific route add function
+ * @get_entry: Callback for switch-specific route get function
+ * @clr_table: Callback for switch-specific clear route table function
+ * @set_domain: Callback for switch-specific domain setting function
+ * @get_domain: Callback for switch-specific domain get function
+ * @em_init: Callback for switch-specific error management init function
+ * @em_handle: Callback for switch-specific error management handler function
+ * @sw_sysfs: Callback that initializes switch-specific sysfs attributes
+ * @nextdev: Array of per-port pointers to the next attached device
+ */
+struct rio_switch {
+	struct list_head node;
+	u16 switchid;
+	u8 *route_table;
+	u32 port_ok;
+	int (*add_entry) (struct rio_mport *mport, u16 destid, u8 hopcount,
+			  u16 table, u16 route_destid, u8 route_port);
+	int (*get_entry) (struct rio_mport *mport, u16 destid, u8 hopcount,
+			  u16 table, u16 route_destid, u8 *route_port);
+	int (*clr_table) (struct rio_mport *mport, u16 destid, u8 hopcount,
+			  u16 table);
+	int (*set_domain) (struct rio_mport *mport, u16 destid, u8 hopcount,
+			   u8 sw_domain);
+	int (*get_domain) (struct rio_mport *mport, u16 destid, u8 hopcount,
+			   u8 *sw_domain);
+	int (*em_init) (struct rio_dev *dev);
+	int (*em_handle) (struct rio_dev *dev, u8 swport);
+	int (*sw_sysfs) (struct rio_dev *dev, int create);
+	struct rio_dev *nextdev[0];
+};
+
+/**
+ * struct rio_dev - RIO device info
+ * @global_list: Node in list of all RIO devices
+ * @net_list: Node in list of RIO devices in a network
+ * @net: Network this device is a part of
+ * @did: Device ID
+ * @vid: Vendor ID
+ * @device_rev: Device revision
+ * @asm_did: Assembly device ID
+ * @asm_vid: Assembly vendor ID
+ * @asm_rev: Assembly revision
+ * @efptr: Extended feature pointer
+ * @pef: Processing element features
+ * @swpinfo: Switch port info
+ * @src_ops: Source operation capabilities
+ * @dst_ops: Destination operation capabilities
+ * @comp_tag: RIO component tag
+ * @phys_efptr: RIO device extended features pointer
+ * @em_efptr: RIO Error Management features pointer
+ * @dma_mask: Mask of bits of RIO address this device implements
+ * @driver: Driver claiming this device
+ * @dev: Device model device
+ * @riores: RIO resources this device owns
+ * @pwcback: port-write callback function for this device
+ * @destid: Network destination ID (or associated destid for switch)
+ * @hopcount: Hopcount to this device
+ * @prev: Previous RIO device connected to the current one
+ * @rswitch: struct rio_switch (if valid for this device)
+ */
+struct rio_dev {
+	struct list_head global_list;	/* node in list of all RIO devices */
+	struct list_head net_list;	/* node in per net list */
+	struct rio_net *net;	/* RIO net this device resides in */
+	u16 did;
+	u16 vid;
+	u32 device_rev;
+	u16 asm_did;
+	u16 asm_vid;
+	u16 asm_rev;
+	u16 efptr;
+	u32 pef;
+	u32 swpinfo;
+	u32 src_ops;
+	u32 dst_ops;
+	u32 comp_tag;
+	u32 phys_efptr;
+	u32 em_efptr;
+	u64 dma_mask;
+	struct rio_driver *driver;	/* RIO driver claiming this device */
+	struct device dev;	/* LDM device structure */
+	struct resource riores[RIO_MAX_DEV_RESOURCES];
+	int (*pwcback) (struct rio_dev *rdev, union rio_pw_msg *msg, int step);
+	u16 destid;
+	u8 hopcount;
+	struct rio_dev *prev;
+	struct rio_switch rswitch[0];	/* RIO switch info */
+};
+
+#define rio_dev_g(n) list_entry(n, struct rio_dev, global_list)
+#define rio_dev_f(n) list_entry(n, struct rio_dev, net_list)
+#define	to_rio_dev(n) container_of(n, struct rio_dev, dev)
+#define sw_to_rio_dev(n) container_of(n, struct rio_dev, rswitch[0])
+
+/**
+ * struct rio_msg - RIO message event
+ * @res: Mailbox resource
+ * @mcback: Message event callback
+ */
+struct rio_msg {
+	struct resource *res;
+	void (*mcback) (struct rio_mport * mport, void *dev_id, int mbox, int slot);
+};
+
+/**
+ * struct rio_dbell - RIO doorbell event
+ * @node: Node in list of doorbell events
+ * @res: Doorbell resource
+ * @dinb: Doorbell event callback
+ * @dev_id: Device specific pointer to pass on event
+ */
+struct rio_dbell {
+	struct list_head node;
+	struct resource *res;
+	void (*dinb) (struct rio_mport *mport, void *dev_id, u16 src, u16 dst, u16 info);
+	void *dev_id;
+};
+
+enum rio_phy_type {
+	RIO_PHY_PARALLEL,
+	RIO_PHY_SERIAL,
+};
+
+/**
+ * struct rio_mport - RIO master port info
+ * @dbells: List of doorbell events
+ * @node: Node in global list of master ports
+ * @nnode: Node in network list of master ports
+ * @iores: I/O mem resource that this master port interface owns
+ * @riores: RIO resources that this master port interfaces owns
+ * @inb_msg: RIO inbound message event descriptors
+ * @outb_msg: RIO outbound message event descriptors
+ * @host_deviceid: Host device ID associated with this master port
+ * @ops: configuration space functions
+ * @id: Port ID, unique among all ports
+ * @index: Port index, unique among all port interfaces of the same type
+ * @sys_size: RapidIO common transport system size
+ * @phy_type: RapidIO phy type
+ * @phys_efptr: RIO port extended features pointer
+ * @name: Port name string
+ * @priv: Master port private data
+ */
+struct rio_mport {
+	struct list_head dbells;	/* list of doorbell events */
+	struct list_head node;	/* node in global list of ports */
+	struct list_head nnode;	/* node in net list of ports */
+	struct resource iores;
+	struct resource riores[RIO_MAX_MPORT_RESOURCES];
+	struct rio_msg inb_msg[RIO_MAX_MBOX];
+	struct rio_msg outb_msg[RIO_MAX_MBOX];
+	int host_deviceid;	/* Host device ID */
+	struct rio_ops *ops;	/* low-level architecture-dependent routines */
+	unsigned char id;	/* port ID, unique among all ports */
+	unsigned char index;	/* port index, unique among all port
+				   interfaces of the same type */
+	unsigned int sys_size;	/* RapidIO common transport system size.
+				 * 0 - Small size. 256 devices.
+				 * 1 - Large size, 65536 devices.
+				 */
+	enum rio_phy_type phy_type;	/* RapidIO phy type */
+	u32 phys_efptr;
+	unsigned char name[40];
+	void *priv;		/* Master port private data */
+};
+
+/**
+ * struct rio_net - RIO network info
+ * @node: Node in global list of RIO networks
+ * @devices: List of devices in this network
+ * @mports: List of master ports accessing this network
+ * @hport: Default port for accessing this network
+ * @id: RIO network ID
+ */
+struct rio_net {
+	struct list_head node;	/* node in list of networks */
+	struct list_head devices;	/* list of devices in this net */
+	struct list_head mports;	/* list of ports accessing net */
+	struct rio_mport *hport;	/* primary port for accessing net */
+	unsigned char id;	/* RIO network ID */
+};
+
+/* Definitions used by switch sysfs initialization callback */
+#define RIO_SW_SYSFS_CREATE	1	/* Create switch attributes */
+#define RIO_SW_SYSFS_REMOVE	0	/* Remove switch attributes */
+
+/* Low-level architecture-dependent routines */
+
+/**
+ * struct rio_ops - Low-level RIO configuration space operations
+ * @lcread: Callback to perform local (master port) read of config space.
+ * @lcwrite: Callback to perform local (master port) write of config space.
+ * @cread: Callback to perform network read of config space.
+ * @cwrite: Callback to perform network write of config space.
+ * @dsend: Callback to send a doorbell message.
+ * @pwenable: Callback to enable/disable port-write message handling.
+ * @open_outb_mbox: Callback to initialize outbound mailbox.
+ * @close_outb_mbox: Callback to shut down outbound mailbox.
+ * @open_inb_mbox: Callback to initialize inbound mailbox.
+ * @close_inb_mbox: Callback to	shut down inbound mailbox.
+ * @add_outb_message: Callback to add a message to an outbound mailbox queue.
+ * @add_inb_buffer: Callback to	add a buffer to an inbound mailbox queue.
+ * @get_inb_message: Callback to get a message from an inbound mailbox queue.
+ */
+struct rio_ops {
+	int (*lcread) (struct rio_mport *mport, int index, u32 offset, int len,
+			u32 *data);
+	int (*lcwrite) (struct rio_mport *mport, int index, u32 offset, int len,
+			u32 data);
+	int (*cread) (struct rio_mport *mport, int index, u16 destid,
+			u8 hopcount, u32 offset, int len, u32 *data);
+	int (*cwrite) (struct rio_mport *mport, int index, u16 destid,
+			u8 hopcount, u32 offset, int len, u32 data);
+	int (*dsend) (struct rio_mport *mport, int index, u16 destid, u16 data);
+	int (*pwenable) (struct rio_mport *mport, int enable);
+	int (*open_outb_mbox)(struct rio_mport *mport, void *dev_id,
+			      int mbox, int entries);
+	void (*close_outb_mbox)(struct rio_mport *mport, int mbox);
+	int  (*open_inb_mbox)(struct rio_mport *mport, void *dev_id,
+			     int mbox, int entries);
+	void (*close_inb_mbox)(struct rio_mport *mport, int mbox);
+	int  (*add_outb_message)(struct rio_mport *mport, struct rio_dev *rdev,
+				 int mbox, void *buffer, size_t len);
+	int (*add_inb_buffer)(struct rio_mport *mport, int mbox, void *buf);
+	void *(*get_inb_message)(struct rio_mport *mport, int mbox);
+};
+
+#define RIO_RESOURCE_MEM	0x00000100
+#define RIO_RESOURCE_DOORBELL	0x00000200
+#define RIO_RESOURCE_MAILBOX	0x00000400
+
+#define RIO_RESOURCE_CACHEABLE	0x00010000
+#define RIO_RESOURCE_PCI	0x00020000
+
+#define RIO_RESOURCE_BUSY	0x80000000
+
+/**
+ * struct rio_driver - RIO driver info
+ * @node: Node in list of drivers
+ * @name: RIO driver name
+ * @id_table: RIO device ids to be associated with this driver
+ * @probe: RIO device inserted
+ * @remove: RIO device removed
+ * @suspend: RIO device suspended
+ * @resume: RIO device awakened
+ * @enable_wake: RIO device enable wake event
+ * @driver: LDM driver struct
+ *
+ * Provides info on a RIO device driver for insertion/removal and
+ * power management purposes.
+ */
+struct rio_driver {
+	struct list_head node;
+	char *name;
+	const struct rio_device_id *id_table;
+	int (*probe) (struct rio_dev * dev, const struct rio_device_id * id);
+	void (*remove) (struct rio_dev * dev);
+	int (*suspend) (struct rio_dev * dev, u32 state);
+	int (*resume) (struct rio_dev * dev);
+	int (*enable_wake) (struct rio_dev * dev, u32 state, int enable);
+	struct device_driver driver;
+};
+
+#define	to_rio_driver(drv) container_of(drv,struct rio_driver, driver)
+
+/**
+ * struct rio_device_id - RIO device identifier
+ * @did: RIO device ID
+ * @vid: RIO vendor ID
+ * @asm_did: RIO assembly device ID
+ * @asm_vid: RIO assembly vendor ID
+ *
+ * Identifies a RIO device based on both the device/vendor IDs and
+ * the assembly device/vendor IDs.
+ */
+struct rio_device_id {
+	u16 did, vid;
+	u16 asm_did, asm_vid;
+};
+
+/**
+ * struct rio_switch_ops - Per-switch operations
+ * @vid: RIO vendor ID
+ * @did: RIO device ID
+ * @init_hook: Callback that performs switch device initialization
+ *
+ * Defines the operations that are necessary to initialize/control
+ * a particular RIO switch device.
+ */
+struct rio_switch_ops {
+	u16 vid, did;
+	int (*init_hook) (struct rio_dev *rdev, int do_enum);
+};
+
+union rio_pw_msg {
+	struct {
+		u32 comptag;	/* Component Tag CSR */
+		u32 errdetect;	/* Port N Error Detect CSR */
+		u32 is_port;	/* Implementation specific + PortID */
+		u32 ltlerrdet;	/* LTL Error Detect CSR */
+		u32 padding[12];
+	} em;
+	u32 raw[RIO_PW_MSG_SIZE/sizeof(u32)];
+};
+
+/* Architecture and hardware-specific functions */
+extern int rio_register_mport(struct rio_mport *);
+extern int rio_open_inb_mbox(struct rio_mport *, void *, int, int);
+extern void rio_close_inb_mbox(struct rio_mport *, int);
+extern int rio_open_outb_mbox(struct rio_mport *, void *, int, int);
+extern void rio_close_outb_mbox(struct rio_mport *, int);
+
+#endif				/* LINUX_RIO_H */
diff --git a/include/linux/rio_drv.h b/include/linux/rio_drv.h
new file mode 100644
index 00000000..7f07470e
--- /dev/null
+++ b/include/linux/rio_drv.h
@@ -0,0 +1,423 @@
+/*
+ * RapidIO driver services
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef LINUX_RIO_DRV_H
+#define LINUX_RIO_DRV_H
+
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/rio.h>
+
+extern int __rio_local_read_config_32(struct rio_mport *port, u32 offset,
+				      u32 * data);
+extern int __rio_local_write_config_32(struct rio_mport *port, u32 offset,
+				       u32 data);
+extern int __rio_local_read_config_16(struct rio_mport *port, u32 offset,
+				      u16 * data);
+extern int __rio_local_write_config_16(struct rio_mport *port, u32 offset,
+				       u16 data);
+extern int __rio_local_read_config_8(struct rio_mport *port, u32 offset,
+				     u8 * data);
+extern int __rio_local_write_config_8(struct rio_mport *port, u32 offset,
+				      u8 data);
+
+extern int rio_mport_read_config_32(struct rio_mport *port, u16 destid,
+				    u8 hopcount, u32 offset, u32 * data);
+extern int rio_mport_write_config_32(struct rio_mport *port, u16 destid,
+				     u8 hopcount, u32 offset, u32 data);
+extern int rio_mport_read_config_16(struct rio_mport *port, u16 destid,
+				    u8 hopcount, u32 offset, u16 * data);
+extern int rio_mport_write_config_16(struct rio_mport *port, u16 destid,
+				     u8 hopcount, u32 offset, u16 data);
+extern int rio_mport_read_config_8(struct rio_mport *port, u16 destid,
+				   u8 hopcount, u32 offset, u8 * data);
+extern int rio_mport_write_config_8(struct rio_mport *port, u16 destid,
+				    u8 hopcount, u32 offset, u8 data);
+
+/**
+ * rio_local_read_config_32 - Read 32 bits from local configuration space
+ * @port: Master port
+ * @offset: Offset into local configuration space
+ * @data: Pointer to read data into
+ *
+ * Reads 32 bits of data from the specified offset within the local
+ * device's configuration space.
+ */
+static inline int rio_local_read_config_32(struct rio_mport *port, u32 offset,
+					   u32 * data)
+{
+	return __rio_local_read_config_32(port, offset, data);
+}
+
+/**
+ * rio_local_write_config_32 - Write 32 bits to local configuration space
+ * @port: Master port
+ * @offset: Offset into local configuration space
+ * @data: Data to be written
+ *
+ * Writes 32 bits of data to the specified offset within the local
+ * device's configuration space.
+ */
+static inline int rio_local_write_config_32(struct rio_mport *port, u32 offset,
+					    u32 data)
+{
+	return __rio_local_write_config_32(port, offset, data);
+}
+
+/**
+ * rio_local_read_config_16 - Read 16 bits from local configuration space
+ * @port: Master port
+ * @offset: Offset into local configuration space
+ * @data: Pointer to read data into
+ *
+ * Reads 16 bits of data from the specified offset within the local
+ * device's configuration space.
+ */
+static inline int rio_local_read_config_16(struct rio_mport *port, u32 offset,
+					   u16 * data)
+{
+	return __rio_local_read_config_16(port, offset, data);
+}
+
+/**
+ * rio_local_write_config_16 - Write 16 bits to local configuration space
+ * @port: Master port
+ * @offset: Offset into local configuration space
+ * @data: Data to be written
+ *
+ * Writes 16 bits of data to the specified offset within the local
+ * device's configuration space.
+ */
+
+static inline int rio_local_write_config_16(struct rio_mport *port, u32 offset,
+					    u16 data)
+{
+	return __rio_local_write_config_16(port, offset, data);
+}
+
+/**
+ * rio_local_read_config_8 - Read 8 bits from local configuration space
+ * @port: Master port
+ * @offset: Offset into local configuration space
+ * @data: Pointer to read data into
+ *
+ * Reads 8 bits of data from the specified offset within the local
+ * device's configuration space.
+ */
+static inline int rio_local_read_config_8(struct rio_mport *port, u32 offset,
+					  u8 * data)
+{
+	return __rio_local_read_config_8(port, offset, data);
+}
+
+/**
+ * rio_local_write_config_8 - Write 8 bits to local configuration space
+ * @port: Master port
+ * @offset: Offset into local configuration space
+ * @data: Data to be written
+ *
+ * Writes 8 bits of data to the specified offset within the local
+ * device's configuration space.
+ */
+static inline int rio_local_write_config_8(struct rio_mport *port, u32 offset,
+					   u8 data)
+{
+	return __rio_local_write_config_8(port, offset, data);
+}
+
+/**
+ * rio_read_config_32 - Read 32 bits from configuration space
+ * @rdev: RIO device
+ * @offset: Offset into device configuration space
+ * @data: Pointer to read data into
+ *
+ * Reads 32 bits of data from the specified offset within the
+ * RIO device's configuration space.
+ */
+static inline int rio_read_config_32(struct rio_dev *rdev, u32 offset,
+				     u32 * data)
+{
+	return rio_mport_read_config_32(rdev->net->hport, rdev->destid,
+					rdev->hopcount, offset, data);
+};
+
+/**
+ * rio_write_config_32 - Write 32 bits to configuration space
+ * @rdev: RIO device
+ * @offset: Offset into device configuration space
+ * @data: Data to be written
+ *
+ * Writes 32 bits of data to the specified offset within the
+ * RIO device's configuration space.
+ */
+static inline int rio_write_config_32(struct rio_dev *rdev, u32 offset,
+				      u32 data)
+{
+	return rio_mport_write_config_32(rdev->net->hport, rdev->destid,
+					 rdev->hopcount, offset, data);
+};
+
+/**
+ * rio_read_config_16 - Read 16 bits from configuration space
+ * @rdev: RIO device
+ * @offset: Offset into device configuration space
+ * @data: Pointer to read data into
+ *
+ * Reads 16 bits of data from the specified offset within the
+ * RIO device's configuration space.
+ */
+static inline int rio_read_config_16(struct rio_dev *rdev, u32 offset,
+				     u16 * data)
+{
+	return rio_mport_read_config_16(rdev->net->hport, rdev->destid,
+					rdev->hopcount, offset, data);
+};
+
+/**
+ * rio_write_config_16 - Write 16 bits to configuration space
+ * @rdev: RIO device
+ * @offset: Offset into device configuration space
+ * @data: Data to be written
+ *
+ * Writes 16 bits of data to the specified offset within the
+ * RIO device's configuration space.
+ */
+static inline int rio_write_config_16(struct rio_dev *rdev, u32 offset,
+				      u16 data)
+{
+	return rio_mport_write_config_16(rdev->net->hport, rdev->destid,
+					 rdev->hopcount, offset, data);
+};
+
+/**
+ * rio_read_config_8 - Read 8 bits from configuration space
+ * @rdev: RIO device
+ * @offset: Offset into device configuration space
+ * @data: Pointer to read data into
+ *
+ * Reads 8 bits of data from the specified offset within the
+ * RIO device's configuration space.
+ */
+static inline int rio_read_config_8(struct rio_dev *rdev, u32 offset, u8 * data)
+{
+	return rio_mport_read_config_8(rdev->net->hport, rdev->destid,
+				       rdev->hopcount, offset, data);
+};
+
+/**
+ * rio_write_config_8 - Write 8 bits to configuration space
+ * @rdev: RIO device
+ * @offset: Offset into device configuration space
+ * @data: Data to be written
+ *
+ * Writes 8 bits of data to the specified offset within the
+ * RIO device's configuration space.
+ */
+static inline int rio_write_config_8(struct rio_dev *rdev, u32 offset, u8 data)
+{
+	return rio_mport_write_config_8(rdev->net->hport, rdev->destid,
+					rdev->hopcount, offset, data);
+};
+
+extern int rio_mport_send_doorbell(struct rio_mport *mport, u16 destid,
+				   u16 data);
+
+/**
+ * rio_send_doorbell - Send a doorbell message to a device
+ * @rdev: RIO device
+ * @data: Doorbell message data
+ *
+ * Send a doorbell message to a RIO device. The doorbell message
+ * has a 16-bit info field provided by the @data argument.
+ */
+static inline int rio_send_doorbell(struct rio_dev *rdev, u16 data)
+{
+	return rio_mport_send_doorbell(rdev->net->hport, rdev->destid, data);
+};
+
+/**
+ * rio_init_mbox_res - Initialize a RIO mailbox resource
+ * @res: resource struct
+ * @start: start of mailbox range
+ * @end: end of mailbox range
+ *
+ * This function is used to initialize the fields of a resource
+ * for use as a mailbox resource.  It initializes a range of
+ * mailboxes using the start and end arguments.
+ */
+static inline void rio_init_mbox_res(struct resource *res, int start, int end)
+{
+	memset(res, 0, sizeof(struct resource));
+	res->start = start;
+	res->end = end;
+	res->flags = RIO_RESOURCE_MAILBOX;
+}
+
+/**
+ * rio_init_dbell_res - Initialize a RIO doorbell resource
+ * @res: resource struct
+ * @start: start of doorbell range
+ * @end: end of doorbell range
+ *
+ * This function is used to initialize the fields of a resource
+ * for use as a doorbell resource.  It initializes a range of
+ * doorbell messages using the start and end arguments.
+ */
+static inline void rio_init_dbell_res(struct resource *res, u16 start, u16 end)
+{
+	memset(res, 0, sizeof(struct resource));
+	res->start = start;
+	res->end = end;
+	res->flags = RIO_RESOURCE_DOORBELL;
+}
+
+/**
+ * RIO_DEVICE - macro used to describe a specific RIO device
+ * @dev: the 16 bit RIO device ID
+ * @ven: the 16 bit RIO vendor ID
+ *
+ * This macro is used to create a struct rio_device_id that matches a
+ * specific device.  The assembly vendor and assembly device fields
+ * will be set to %RIO_ANY_ID.
+ */
+#define RIO_DEVICE(dev,ven) \
+	.did = (dev), .vid = (ven), \
+	.asm_did = RIO_ANY_ID, .asm_vid = RIO_ANY_ID
+
+/* Mailbox management */
+extern int rio_request_outb_mbox(struct rio_mport *, void *, int, int,
+				 void (*)(struct rio_mport *, void *,int, int));
+extern int rio_release_outb_mbox(struct rio_mport *, int);
+
+/**
+ * rio_add_outb_message - Add RIO message to an outbound mailbox queue
+ * @mport: RIO master port containing the outbound queue
+ * @rdev: RIO device the message is be sent to
+ * @mbox: The outbound mailbox queue
+ * @buffer: Pointer to the message buffer
+ * @len: Length of the message buffer
+ *
+ * Adds a RIO message buffer to an outbound mailbox queue for
+ * transmission. Returns 0 on success.
+ */
+static inline int rio_add_outb_message(struct rio_mport *mport,
+				       struct rio_dev *rdev, int mbox,
+				       void *buffer, size_t len)
+{
+	return mport->ops->add_outb_message(mport, rdev, mbox,
+						   buffer, len);
+}
+
+extern int rio_request_inb_mbox(struct rio_mport *, void *, int, int,
+				void (*)(struct rio_mport *, void *, int, int));
+extern int rio_release_inb_mbox(struct rio_mport *, int);
+
+/**
+ * rio_add_inb_buffer - Add buffer to an inbound mailbox queue
+ * @mport: Master port containing the inbound mailbox
+ * @mbox: The inbound mailbox number
+ * @buffer: Pointer to the message buffer
+ *
+ * Adds a buffer to an inbound mailbox queue for reception. Returns
+ * 0 on success.
+ */
+static inline int rio_add_inb_buffer(struct rio_mport *mport, int mbox,
+				     void *buffer)
+{
+	return mport->ops->add_inb_buffer(mport, mbox, buffer);
+}
+
+/**
+ * rio_get_inb_message - Get A RIO message from an inbound mailbox queue
+ * @mport: Master port containing the inbound mailbox
+ * @mbox: The inbound mailbox number
+ *
+ * Get a RIO message from an inbound mailbox queue. Returns 0 on success.
+ */
+static inline void *rio_get_inb_message(struct rio_mport *mport, int mbox)
+{
+	return mport->ops->get_inb_message(mport, mbox);
+}
+
+/* Doorbell management */
+extern int rio_request_inb_dbell(struct rio_mport *, void *, u16, u16,
+				 void (*)(struct rio_mport *, void *, u16, u16, u16));
+extern int rio_release_inb_dbell(struct rio_mport *, u16, u16);
+extern struct resource *rio_request_outb_dbell(struct rio_dev *, u16, u16);
+extern int rio_release_outb_dbell(struct rio_dev *, struct resource *);
+
+/* Memory region management */
+int rio_claim_resource(struct rio_dev *, int);
+int rio_request_regions(struct rio_dev *, char *);
+void rio_release_regions(struct rio_dev *);
+int rio_request_region(struct rio_dev *, int, char *);
+void rio_release_region(struct rio_dev *, int);
+
+/* Port-Write management */
+extern int rio_request_inb_pwrite(struct rio_dev *,
+			int (*)(struct rio_dev *, union rio_pw_msg*, int));
+extern int rio_release_inb_pwrite(struct rio_dev *);
+extern int rio_inb_pwrite_handler(union rio_pw_msg *pw_msg);
+
+/* LDM support */
+int rio_register_driver(struct rio_driver *);
+void rio_unregister_driver(struct rio_driver *);
+struct rio_dev *rio_dev_get(struct rio_dev *);
+void rio_dev_put(struct rio_dev *);
+
+/**
+ * rio_name - Get the unique RIO device identifier
+ * @rdev: RIO device
+ *
+ * Get the unique RIO device identifier. Returns the device
+ * identifier string.
+ */
+static inline const char *rio_name(struct rio_dev *rdev)
+{
+	return dev_name(&rdev->dev);
+}
+
+/**
+ * rio_get_drvdata - Get RIO driver specific data
+ * @rdev: RIO device
+ *
+ * Get RIO driver specific data. Returns a pointer to the
+ * driver specific data.
+ */
+static inline void *rio_get_drvdata(struct rio_dev *rdev)
+{
+	return dev_get_drvdata(&rdev->dev);
+}
+
+/**
+ * rio_set_drvdata - Set RIO driver specific data
+ * @rdev: RIO device
+ * @data: Pointer to driver specific data
+ *
+ * Set RIO driver specific data. device struct driver data pointer
+ * is set to the @data argument.
+ */
+static inline void rio_set_drvdata(struct rio_dev *rdev, void *data)
+{
+	dev_set_drvdata(&rdev->dev, data);
+}
+
+/* Misc driver helpers */
+extern u16 rio_local_get_device_id(struct rio_mport *port);
+extern struct rio_dev *rio_get_device(u16 vid, u16 did, struct rio_dev *from);
+extern struct rio_dev *rio_get_asm(u16 vid, u16 did, u16 asm_vid, u16 asm_did,
+				   struct rio_dev *from);
+
+#endif				/* LINUX_RIO_DRV_H */
diff --git a/include/linux/rio_ids.h b/include/linux/rio_ids.h
new file mode 100644
index 00000000..b66d13d1
--- /dev/null
+++ b/include/linux/rio_ids.h
@@ -0,0 +1,44 @@
+/*
+ * RapidIO devices
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef LINUX_RIO_IDS_H
+#define LINUX_RIO_IDS_H
+
+#define RIO_ANY_ID			0xffff
+
+#define RIO_VID_FREESCALE		0x0002
+#define RIO_DID_MPC8560			0x0003
+
+#define RIO_VID_TUNDRA			0x000d
+#define RIO_DID_TSI500			0x0500
+#define RIO_DID_TSI568			0x0568
+#define RIO_DID_TSI572			0x0572
+#define RIO_DID_TSI574			0x0574
+#define RIO_DID_TSI576			0x0578 /* Same ID as Tsi578 */
+#define RIO_DID_TSI577			0x0577
+#define RIO_DID_TSI578			0x0578
+
+#define RIO_VID_IDT			0x0038
+#define RIO_DID_IDT70K200		0x0310
+#define RIO_DID_IDTCPS8			0x035c
+#define RIO_DID_IDTCPS12		0x035d
+#define RIO_DID_IDTCPS16		0x035b
+#define RIO_DID_IDTCPS6Q		0x035f
+#define RIO_DID_IDTCPS10Q		0x035e
+#define RIO_DID_IDTCPS1848		0x0374
+#define RIO_DID_IDTCPS1432		0x0375
+#define RIO_DID_IDTCPS1616		0x0379
+#define RIO_DID_IDTVPS1616		0x0377
+#define RIO_DID_IDTSPS1616		0x0378
+#define RIO_DID_TSI721			0x80ab
+
+#endif				/* LINUX_RIO_IDS_H */
diff --git a/include/linux/rio_regs.h b/include/linux/rio_regs.h
new file mode 100644
index 00000000..218168a2
--- /dev/null
+++ b/include/linux/rio_regs.h
@@ -0,0 +1,295 @@
+/*
+ * RapidIO register definitions
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef LINUX_RIO_REGS_H
+#define LINUX_RIO_REGS_H
+
+/*
+ * In RapidIO, each device has a 16MB configuration space that is
+ * accessed via maintenance transactions.  Portions of configuration
+ * space are standardized and/or reserved.
+ */
+#define RIO_MAINT_SPACE_SZ	0x1000000 /* 16MB of RapidIO mainenance space */
+
+#define RIO_DEV_ID_CAR		0x00	/* [I] Device Identity CAR */
+#define RIO_DEV_INFO_CAR	0x04	/* [I] Device Information CAR */
+#define RIO_ASM_ID_CAR		0x08	/* [I] Assembly Identity CAR */
+#define  RIO_ASM_ID_MASK		0xffff0000	/* [I] Asm ID Mask */
+#define  RIO_ASM_VEN_ID_MASK		0x0000ffff	/* [I] Asm Vend Mask */
+
+#define RIO_ASM_INFO_CAR	0x0c	/* [I] Assembly Information CAR */
+#define  RIO_ASM_REV_MASK		0xffff0000	/* [I] Asm Rev Mask */
+#define  RIO_EXT_FTR_PTR_MASK		0x0000ffff	/* [I] EF_PTR Mask */
+
+#define RIO_PEF_CAR		0x10	/* [I] Processing Element Features CAR */
+#define  RIO_PEF_BRIDGE			0x80000000	/* [I] Bridge */
+#define  RIO_PEF_MEMORY			0x40000000	/* [I] MMIO */
+#define  RIO_PEF_PROCESSOR		0x20000000	/* [I] Processor */
+#define  RIO_PEF_SWITCH			0x10000000	/* [I] Switch */
+#define  RIO_PEF_MULTIPORT		0x08000000	/* [VI, 2.1] Multiport */
+#define  RIO_PEF_INB_MBOX		0x00f00000	/* [II, <= 1.2] Mailboxes */
+#define  RIO_PEF_INB_MBOX0		0x00800000	/* [II, <= 1.2] Mailbox 0 */
+#define  RIO_PEF_INB_MBOX1		0x00400000	/* [II, <= 1.2] Mailbox 1 */
+#define  RIO_PEF_INB_MBOX2		0x00200000	/* [II, <= 1.2] Mailbox 2 */
+#define  RIO_PEF_INB_MBOX3		0x00100000	/* [II, <= 1.2] Mailbox 3 */
+#define  RIO_PEF_INB_DOORBELL		0x00080000	/* [II, <= 1.2] Doorbells */
+#define  RIO_PEF_EXT_RT			0x00000200	/* [III, 1.3] Extended route table support */
+#define  RIO_PEF_STD_RT			0x00000100	/* [III, 1.3] Standard route table support */
+#define  RIO_PEF_CTLS			0x00000010	/* [III] CTLS */
+#define  RIO_PEF_EXT_FEATURES		0x00000008	/* [I] EFT_PTR valid */
+#define  RIO_PEF_ADDR_66		0x00000004	/* [I] 66 bits */
+#define  RIO_PEF_ADDR_50		0x00000002	/* [I] 50 bits */
+#define  RIO_PEF_ADDR_34		0x00000001	/* [I] 34 bits */
+
+#define RIO_SWP_INFO_CAR	0x14	/* [I] Switch Port Information CAR */
+#define  RIO_SWP_INFO_PORT_TOTAL_MASK	0x0000ff00	/* [I] Total number of ports */
+#define  RIO_SWP_INFO_PORT_NUM_MASK	0x000000ff	/* [I] Maintenance transaction port number */
+#define  RIO_GET_TOTAL_PORTS(x)		((x & RIO_SWP_INFO_PORT_TOTAL_MASK) >> 8)
+#define  RIO_GET_PORT_NUM(x)		(x & RIO_SWP_INFO_PORT_NUM_MASK)
+
+#define RIO_SRC_OPS_CAR		0x18	/* [I] Source Operations CAR */
+#define  RIO_SRC_OPS_READ		0x00008000	/* [I] Read op */
+#define  RIO_SRC_OPS_WRITE		0x00004000	/* [I] Write op */
+#define  RIO_SRC_OPS_STREAM_WRITE	0x00002000	/* [I] Str-write op */
+#define  RIO_SRC_OPS_WRITE_RESPONSE	0x00001000	/* [I] Write/resp op */
+#define  RIO_SRC_OPS_DATA_MSG		0x00000800	/* [II] Data msg op */
+#define  RIO_SRC_OPS_DOORBELL		0x00000400	/* [II] Doorbell op */
+#define  RIO_SRC_OPS_ATOMIC_TST_SWP	0x00000100	/* [I] Atomic TAS op */
+#define  RIO_SRC_OPS_ATOMIC_INC		0x00000080	/* [I] Atomic inc op */
+#define  RIO_SRC_OPS_ATOMIC_DEC		0x00000040	/* [I] Atomic dec op */
+#define  RIO_SRC_OPS_ATOMIC_SET		0x00000020	/* [I] Atomic set op */
+#define  RIO_SRC_OPS_ATOMIC_CLR		0x00000010	/* [I] Atomic clr op */
+#define  RIO_SRC_OPS_PORT_WRITE		0x00000004	/* [I] Port-write op */
+
+#define RIO_DST_OPS_CAR		0x1c	/* Destination Operations CAR */
+#define  RIO_DST_OPS_READ		0x00008000	/* [I] Read op */
+#define  RIO_DST_OPS_WRITE		0x00004000	/* [I] Write op */
+#define  RIO_DST_OPS_STREAM_WRITE	0x00002000	/* [I] Str-write op */
+#define  RIO_DST_OPS_WRITE_RESPONSE	0x00001000	/* [I] Write/resp op */
+#define  RIO_DST_OPS_DATA_MSG		0x00000800	/* [II] Data msg op */
+#define  RIO_DST_OPS_DOORBELL		0x00000400	/* [II] Doorbell op */
+#define  RIO_DST_OPS_ATOMIC_TST_SWP	0x00000100	/* [I] Atomic TAS op */
+#define  RIO_DST_OPS_ATOMIC_INC		0x00000080	/* [I] Atomic inc op */
+#define  RIO_DST_OPS_ATOMIC_DEC		0x00000040	/* [I] Atomic dec op */
+#define  RIO_DST_OPS_ATOMIC_SET		0x00000020	/* [I] Atomic set op */
+#define  RIO_DST_OPS_ATOMIC_CLR		0x00000010	/* [I] Atomic clr op */
+#define  RIO_DST_OPS_PORT_WRITE		0x00000004	/* [I] Port-write op */
+
+#define  RIO_OPS_READ			0x00008000	/* [I] Read op */
+#define  RIO_OPS_WRITE			0x00004000	/* [I] Write op */
+#define  RIO_OPS_STREAM_WRITE		0x00002000	/* [I] Str-write op */
+#define  RIO_OPS_WRITE_RESPONSE		0x00001000	/* [I] Write/resp op */
+#define  RIO_OPS_DATA_MSG		0x00000800	/* [II] Data msg op */
+#define  RIO_OPS_DOORBELL		0x00000400	/* [II] Doorbell op */
+#define  RIO_OPS_ATOMIC_TST_SWP		0x00000100	/* [I] Atomic TAS op */
+#define  RIO_OPS_ATOMIC_INC		0x00000080	/* [I] Atomic inc op */
+#define  RIO_OPS_ATOMIC_DEC		0x00000040	/* [I] Atomic dec op */
+#define  RIO_OPS_ATOMIC_SET		0x00000020	/* [I] Atomic set op */
+#define  RIO_OPS_ATOMIC_CLR		0x00000010	/* [I] Atomic clr op */
+#define  RIO_OPS_PORT_WRITE		0x00000004	/* [I] Port-write op */
+
+					/* 0x20-0x30 *//* Reserved */
+
+#define	RIO_SWITCH_RT_LIMIT	0x34	/* [III, 1.3] Switch Route Table Destination ID Limit CAR */
+#define	 RIO_RT_MAX_DESTID		0x0000ffff
+
+#define RIO_MBOX_CSR		0x40	/* [II, <= 1.2] Mailbox CSR */
+#define  RIO_MBOX0_AVAIL		0x80000000	/* [II] Mbox 0 avail */
+#define  RIO_MBOX0_FULL			0x40000000	/* [II] Mbox 0 full */
+#define  RIO_MBOX0_EMPTY		0x20000000	/* [II] Mbox 0 empty */
+#define  RIO_MBOX0_BUSY			0x10000000	/* [II] Mbox 0 busy */
+#define  RIO_MBOX0_FAIL			0x08000000	/* [II] Mbox 0 fail */
+#define  RIO_MBOX0_ERROR		0x04000000	/* [II] Mbox 0 error */
+#define  RIO_MBOX1_AVAIL		0x00800000	/* [II] Mbox 1 avail */
+#define  RIO_MBOX1_FULL			0x00200000	/* [II] Mbox 1 full */
+#define  RIO_MBOX1_EMPTY		0x00200000	/* [II] Mbox 1 empty */
+#define  RIO_MBOX1_BUSY			0x00100000	/* [II] Mbox 1 busy */
+#define  RIO_MBOX1_FAIL			0x00080000	/* [II] Mbox 1 fail */
+#define  RIO_MBOX1_ERROR		0x00040000	/* [II] Mbox 1 error */
+#define  RIO_MBOX2_AVAIL		0x00008000	/* [II] Mbox 2 avail */
+#define  RIO_MBOX2_FULL			0x00004000	/* [II] Mbox 2 full */
+#define  RIO_MBOX2_EMPTY		0x00002000	/* [II] Mbox 2 empty */
+#define  RIO_MBOX2_BUSY			0x00001000	/* [II] Mbox 2 busy */
+#define  RIO_MBOX2_FAIL			0x00000800	/* [II] Mbox 2 fail */
+#define  RIO_MBOX2_ERROR		0x00000400	/* [II] Mbox 2 error */
+#define  RIO_MBOX3_AVAIL		0x00000080	/* [II] Mbox 3 avail */
+#define  RIO_MBOX3_FULL			0x00000040	/* [II] Mbox 3 full */
+#define  RIO_MBOX3_EMPTY		0x00000020	/* [II] Mbox 3 empty */
+#define  RIO_MBOX3_BUSY			0x00000010	/* [II] Mbox 3 busy */
+#define  RIO_MBOX3_FAIL			0x00000008	/* [II] Mbox 3 fail */
+#define  RIO_MBOX3_ERROR		0x00000004	/* [II] Mbox 3 error */
+
+#define RIO_WRITE_PORT_CSR	0x44	/* [I, <= 1.2] Write Port CSR */
+#define RIO_DOORBELL_CSR	0x44	/* [II, <= 1.2] Doorbell CSR */
+#define  RIO_DOORBELL_AVAIL		0x80000000	/* [II] Doorbell avail */
+#define  RIO_DOORBELL_FULL		0x40000000	/* [II] Doorbell full */
+#define  RIO_DOORBELL_EMPTY		0x20000000	/* [II] Doorbell empty */
+#define  RIO_DOORBELL_BUSY		0x10000000	/* [II] Doorbell busy */
+#define  RIO_DOORBELL_FAILED		0x08000000	/* [II] Doorbell failed */
+#define  RIO_DOORBELL_ERROR		0x04000000	/* [II] Doorbell error */
+#define  RIO_WRITE_PORT_AVAILABLE	0x00000080	/* [I] Write Port Available */
+#define  RIO_WRITE_PORT_FULL		0x00000040	/* [I] Write Port Full */
+#define  RIO_WRITE_PORT_EMPTY		0x00000020	/* [I] Write Port Empty */
+#define  RIO_WRITE_PORT_BUSY		0x00000010	/* [I] Write Port Busy */
+#define  RIO_WRITE_PORT_FAILED		0x00000008	/* [I] Write Port Failed */
+#define  RIO_WRITE_PORT_ERROR		0x00000004	/* [I] Write Port Error */
+
+					/* 0x48 *//* Reserved */
+
+#define RIO_PELL_CTRL_CSR	0x4c	/* [I] PE Logical Layer Control CSR */
+#define   RIO_PELL_ADDR_66		0x00000004	/* [I] 66-bit addr */
+#define   RIO_PELL_ADDR_50		0x00000002	/* [I] 50-bit addr */
+#define   RIO_PELL_ADDR_34		0x00000001	/* [I] 34-bit addr */
+
+					/* 0x50-0x54 *//* Reserved */
+
+#define RIO_LCSH_BA		0x58	/* [I] LCS High Base Address */
+#define RIO_LCSL_BA		0x5c	/* [I] LCS Base Address */
+
+#define RIO_DID_CSR		0x60	/* [III] Base Device ID CSR */
+
+					/* 0x64 *//* Reserved */
+
+#define RIO_HOST_DID_LOCK_CSR	0x68	/* [III] Host Base Device ID Lock CSR */
+#define RIO_COMPONENT_TAG_CSR	0x6c	/* [III] Component Tag CSR */
+
+#define RIO_STD_RTE_CONF_DESTID_SEL_CSR	0x70
+#define  RIO_STD_RTE_CONF_EXTCFGEN		0x80000000
+#define RIO_STD_RTE_CONF_PORT_SEL_CSR	0x74
+#define RIO_STD_RTE_DEFAULT_PORT	0x78
+
+					/* 0x7c-0xf8 *//* Reserved */
+					/* 0x100-0xfff8 *//* [I] Extended Features Space */
+					/* 0x10000-0xfffff8 *//* [I] Implementation-defined Space */
+
+/*
+ * Extended Features Space is a configuration space area where
+ * functionality is mapped into extended feature blocks via a
+ * singly linked list of extended feature pointers (EFT_PTR).
+ *
+ * Each extended feature block can be identified/located in
+ * Extended Features Space by walking the extended feature
+ * list starting with the Extended Feature Pointer located
+ * in the Assembly Information CAR.
+ *
+ * Extended Feature Blocks (EFBs) are identified with an assigned
+ * EFB ID. Extended feature block offsets in the definitions are
+ * relative to the offset of the EFB within the  Extended Features
+ * Space.
+ */
+
+/* Helper macros to parse the Extended Feature Block header */
+#define RIO_EFB_PTR_MASK	0xffff0000
+#define RIO_EFB_ID_MASK		0x0000ffff
+#define RIO_GET_BLOCK_PTR(x)	((x & RIO_EFB_PTR_MASK) >> 16)
+#define RIO_GET_BLOCK_ID(x)	(x & RIO_EFB_ID_MASK)
+
+/* Extended Feature Block IDs */
+#define RIO_EFB_PAR_EP_ID	0x0001	/* [IV] LP/LVDS EP Devices */
+#define RIO_EFB_PAR_EP_REC_ID	0x0002	/* [IV] LP/LVDS EP Recovery Devices */
+#define RIO_EFB_PAR_EP_FREE_ID	0x0003	/* [IV] LP/LVDS EP Free Devices */
+#define RIO_EFB_SER_EP_ID_V13P	0x0001	/* [VI] LP/Serial EP Devices, RapidIO Spec ver 1.3 and above */
+#define RIO_EFB_SER_EP_REC_ID_V13P	0x0002	/* [VI] LP/Serial EP Recovery Devices, RapidIO Spec ver 1.3 and above */
+#define RIO_EFB_SER_EP_FREE_ID_V13P	0x0003	/* [VI] LP/Serial EP Free Devices, RapidIO Spec ver 1.3 and above */
+#define RIO_EFB_SER_EP_ID	0x0004	/* [VI] LP/Serial EP Devices */
+#define RIO_EFB_SER_EP_REC_ID	0x0005	/* [VI] LP/Serial EP Recovery Devices */
+#define RIO_EFB_SER_EP_FREE_ID	0x0006	/* [VI] LP/Serial EP Free Devices */
+#define RIO_EFB_SER_EP_FREC_ID	0x0009  /* [VI] LP/Serial EP Free Recovery Devices */
+#define RIO_EFB_ERR_MGMNT	0x0007  /* [VIII] Error Management Extensions */
+
+/*
+ * Physical 8/16 LP-LVDS
+ * ID=0x0001, Generic End Point Devices
+ * ID=0x0002, Generic End Point Devices, software assisted recovery option
+ * ID=0x0003, Generic End Point Free Devices
+ *
+ * Physical LP-Serial
+ * ID=0x0004, Generic End Point Devices
+ * ID=0x0005, Generic End Point Devices, software assisted recovery option
+ * ID=0x0006, Generic End Point Free Devices
+ */
+#define RIO_PORT_MNT_HEADER		0x0000
+#define RIO_PORT_REQ_CTL_CSR		0x0020
+#define RIO_PORT_RSP_CTL_CSR		0x0024	/* 0x0001/0x0002 */
+#define RIO_PORT_LINKTO_CTL_CSR		0x0020	/* Serial */
+#define RIO_PORT_RSPTO_CTL_CSR		0x0024	/* Serial */
+#define RIO_PORT_GEN_CTL_CSR		0x003c
+#define  RIO_PORT_GEN_HOST		0x80000000
+#define  RIO_PORT_GEN_MASTER		0x40000000
+#define  RIO_PORT_GEN_DISCOVERED	0x20000000
+#define RIO_PORT_N_MNT_REQ_CSR(x)	(0x0040 + x*0x20)	/* 0x0002 */
+#define  RIO_MNT_REQ_CMD_RD		0x03	/* Reset-device command */
+#define  RIO_MNT_REQ_CMD_IS		0x04	/* Input-status command */
+#define RIO_PORT_N_MNT_RSP_CSR(x)	(0x0044 + x*0x20)	/* 0x0002 */
+#define  RIO_PORT_N_MNT_RSP_RVAL	0x80000000 /* Response Valid */
+#define  RIO_PORT_N_MNT_RSP_ASTAT	0x000007e0 /* ackID Status */
+#define  RIO_PORT_N_MNT_RSP_LSTAT	0x0000001f /* Link Status */
+#define RIO_PORT_N_ACK_STS_CSR(x)	(0x0048 + x*0x20)	/* 0x0002 */
+#define  RIO_PORT_N_ACK_CLEAR		0x80000000
+#define  RIO_PORT_N_ACK_INBOUND		0x3f000000
+#define  RIO_PORT_N_ACK_OUTSTAND	0x00003f00
+#define  RIO_PORT_N_ACK_OUTBOUND	0x0000003f
+#define RIO_PORT_N_ERR_STS_CSR(x)	(0x0058 + x*0x20)
+#define  RIO_PORT_N_ERR_STS_PW_OUT_ES	0x00010000 /* Output Error-stopped */
+#define  RIO_PORT_N_ERR_STS_PW_INP_ES	0x00000100 /* Input Error-stopped */
+#define  RIO_PORT_N_ERR_STS_PW_PEND	0x00000010 /* Port-Write Pending */
+#define  RIO_PORT_N_ERR_STS_PORT_ERR	0x00000004
+#define  RIO_PORT_N_ERR_STS_PORT_OK	0x00000002
+#define  RIO_PORT_N_ERR_STS_PORT_UNINIT	0x00000001
+#define RIO_PORT_N_CTL_CSR(x)		(0x005c + x*0x20)
+#define  RIO_PORT_N_CTL_PWIDTH		0xc0000000
+#define  RIO_PORT_N_CTL_PWIDTH_1	0x00000000
+#define  RIO_PORT_N_CTL_PWIDTH_4	0x40000000
+#define  RIO_PORT_N_CTL_P_TYP_SER	0x00000001
+#define  RIO_PORT_N_CTL_LOCKOUT		0x00000002
+#define  RIO_PORT_N_CTL_EN_RX_SER	0x00200000
+#define  RIO_PORT_N_CTL_EN_TX_SER	0x00400000
+#define  RIO_PORT_N_CTL_EN_RX_PAR	0x08000000
+#define  RIO_PORT_N_CTL_EN_TX_PAR	0x40000000
+
+/*
+ * Error Management Extensions (RapidIO 1.3+, Part 8)
+ *
+ * Extended Features Block ID=0x0007
+ */
+
+/* General EM Registers (Common for all Ports) */
+
+#define RIO_EM_EFB_HEADER	0x000	/* Error Management Extensions Block Header */
+#define RIO_EM_LTL_ERR_DETECT	0x008	/* Logical/Transport Layer Error Detect CSR */
+#define RIO_EM_LTL_ERR_EN	0x00c	/* Logical/Transport Layer Error Enable CSR */
+#define  REM_LTL_ERR_ILLTRAN		0x08000000 /* Illegal Transaction decode */
+#define  REM_LTL_ERR_UNSOLR		0x00800000 /* Unsolicited Response */
+#define  REM_LTL_ERR_UNSUPTR		0x00400000 /* Unsupported Transaction */
+#define  REM_LTL_ERR_IMPSPEC		0x000000ff /* Implementation Specific */
+#define RIO_EM_LTL_HIADDR_CAP	0x010	/* Logical/Transport Layer High Address Capture CSR */
+#define RIO_EM_LTL_ADDR_CAP	0x014	/* Logical/Transport Layer Address Capture CSR */
+#define RIO_EM_LTL_DEVID_CAP	0x018	/* Logical/Transport Layer Device ID Capture CSR */
+#define RIO_EM_LTL_CTRL_CAP	0x01c	/* Logical/Transport Layer Control Capture CSR */
+#define RIO_EM_PW_TGT_DEVID	0x028	/* Port-write Target deviceID CSR */
+#define RIO_EM_PKT_TTL		0x02c	/* Packet Time-to-live CSR */
+
+/* Per-Port EM Registers */
+
+#define RIO_EM_PN_ERR_DETECT(x)	(0x040 + x*0x40) /* Port N Error Detect CSR */
+#define  REM_PED_IMPL_SPEC		0x80000000
+#define  REM_PED_LINK_TO		0x00000001
+#define RIO_EM_PN_ERRRATE_EN(x) (0x044 + x*0x40) /* Port N Error Rate Enable CSR */
+#define RIO_EM_PN_ATTRIB_CAP(x)	(0x048 + x*0x40) /* Port N Attributes Capture CSR */
+#define RIO_EM_PN_PKT_CAP_0(x)	(0x04c + x*0x40) /* Port N Packet/Control Symbol Capture 0 CSR */
+#define RIO_EM_PN_PKT_CAP_1(x)	(0x050 + x*0x40) /* Port N Packet Capture 1 CSR */
+#define RIO_EM_PN_PKT_CAP_2(x)	(0x054 + x*0x40) /* Port N Packet Capture 2 CSR */
+#define RIO_EM_PN_PKT_CAP_3(x)	(0x058 + x*0x40) /* Port N Packet Capture 3 CSR */
+#define RIO_EM_PN_ERRRATE(x)	(0x068 + x*0x40) /* Port N Error Rate CSR */
+#define RIO_EM_PN_ERRRATE_TR(x) (0x06c + x*0x40) /* Port N Error Rate Threshold CSR */
+
+#endif				/* LINUX_RIO_REGS_H */
diff --git a/include/linux/rmap.h b/include/linux/rmap.h
new file mode 100644
index 00000000..fd07c454
--- /dev/null
+++ b/include/linux/rmap.h
@@ -0,0 +1,263 @@
+#ifndef _LINUX_RMAP_H
+#define _LINUX_RMAP_H
+/*
+ * Declarations for Reverse Mapping functions in mm/rmap.c
+ */
+
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/mutex.h>
+#include <linux/memcontrol.h>
+
+/*
+ * The anon_vma heads a list of private "related" vmas, to scan if
+ * an anonymous page pointing to this anon_vma needs to be unmapped:
+ * the vmas on the list will be related by forking, or by splitting.
+ *
+ * Since vmas come and go as they are split and merged (particularly
+ * in mprotect), the mapping field of an anonymous page cannot point
+ * directly to a vma: instead it points to an anon_vma, on whose list
+ * the related vmas can be easily linked or unlinked.
+ *
+ * After unlinking the last vma on the list, we must garbage collect
+ * the anon_vma object itself: we're guaranteed no page can be
+ * pointing to this anon_vma once its vma list is empty.
+ */
+struct anon_vma {
+	struct anon_vma *root;	/* Root of this anon_vma tree */
+	struct mutex mutex;	/* Serialize access to vma list */
+	/*
+	 * The refcount is taken on an anon_vma when there is no
+	 * guarantee that the vma of page tables will exist for
+	 * the duration of the operation. A caller that takes
+	 * the reference is responsible for clearing up the
+	 * anon_vma if they are the last user on release
+	 */
+	atomic_t refcount;
+
+	/*
+	 * NOTE: the LSB of the head.next is set by
+	 * mm_take_all_locks() _after_ taking the above lock. So the
+	 * head must only be read/written after taking the above lock
+	 * to be sure to see a valid next pointer. The LSB bit itself
+	 * is serialized by a system wide lock only visible to
+	 * mm_take_all_locks() (mm_all_locks_mutex).
+	 */
+	struct list_head head;	/* Chain of private "related" vmas */
+};
+
+/*
+ * The copy-on-write semantics of fork mean that an anon_vma
+ * can become associated with multiple processes. Furthermore,
+ * each child process will have its own anon_vma, where new
+ * pages for that process are instantiated.
+ *
+ * This structure allows us to find the anon_vmas associated
+ * with a VMA, or the VMAs associated with an anon_vma.
+ * The "same_vma" list contains the anon_vma_chains linking
+ * all the anon_vmas associated with this VMA.
+ * The "same_anon_vma" list contains the anon_vma_chains
+ * which link all the VMAs associated with this anon_vma.
+ */
+struct anon_vma_chain {
+	struct vm_area_struct *vma;
+	struct anon_vma *anon_vma;
+	struct list_head same_vma;   /* locked by mmap_sem & page_table_lock */
+	struct list_head same_anon_vma;	/* locked by anon_vma->mutex */
+};
+
+#ifdef CONFIG_MMU
+static inline void get_anon_vma(struct anon_vma *anon_vma)
+{
+	atomic_inc(&anon_vma->refcount);
+}
+
+void __put_anon_vma(struct anon_vma *anon_vma);
+
+static inline void put_anon_vma(struct anon_vma *anon_vma)
+{
+	if (atomic_dec_and_test(&anon_vma->refcount))
+		__put_anon_vma(anon_vma);
+}
+
+static inline struct anon_vma *page_anon_vma(struct page *page)
+{
+	if (((unsigned long)page->mapping & PAGE_MAPPING_FLAGS) !=
+					    PAGE_MAPPING_ANON)
+		return NULL;
+	return page_rmapping(page);
+}
+
+static inline void vma_lock_anon_vma(struct vm_area_struct *vma)
+{
+	struct anon_vma *anon_vma = vma->anon_vma;
+	if (anon_vma)
+		mutex_lock(&anon_vma->root->mutex);
+}
+
+static inline void vma_unlock_anon_vma(struct vm_area_struct *vma)
+{
+	struct anon_vma *anon_vma = vma->anon_vma;
+	if (anon_vma)
+		mutex_unlock(&anon_vma->root->mutex);
+}
+
+static inline void anon_vma_lock(struct anon_vma *anon_vma)
+{
+	mutex_lock(&anon_vma->root->mutex);
+}
+
+static inline void anon_vma_unlock(struct anon_vma *anon_vma)
+{
+	mutex_unlock(&anon_vma->root->mutex);
+}
+
+/*
+ * anon_vma helper functions.
+ */
+void anon_vma_init(void);	/* create anon_vma_cachep */
+int  anon_vma_prepare(struct vm_area_struct *);
+void unlink_anon_vmas(struct vm_area_struct *);
+int anon_vma_clone(struct vm_area_struct *, struct vm_area_struct *);
+void anon_vma_moveto_tail(struct vm_area_struct *);
+int anon_vma_fork(struct vm_area_struct *, struct vm_area_struct *);
+
+static inline void anon_vma_merge(struct vm_area_struct *vma,
+				  struct vm_area_struct *next)
+{
+	VM_BUG_ON(vma->anon_vma != next->anon_vma);
+	unlink_anon_vmas(next);
+}
+
+struct anon_vma *page_get_anon_vma(struct page *page);
+
+/*
+ * rmap interfaces called when adding or removing pte of page
+ */
+void page_move_anon_rmap(struct page *, struct vm_area_struct *, unsigned long);
+void page_add_anon_rmap(struct page *, struct vm_area_struct *, unsigned long);
+void do_page_add_anon_rmap(struct page *, struct vm_area_struct *,
+			   unsigned long, int);
+void page_add_new_anon_rmap(struct page *, struct vm_area_struct *, unsigned long);
+void page_add_file_rmap(struct page *);
+void page_remove_rmap(struct page *);
+
+void hugepage_add_anon_rmap(struct page *, struct vm_area_struct *,
+			    unsigned long);
+void hugepage_add_new_anon_rmap(struct page *, struct vm_area_struct *,
+				unsigned long);
+
+static inline void page_dup_rmap(struct page *page)
+{
+	atomic_inc(&page->_mapcount);
+}
+
+/*
+ * Called from mm/vmscan.c to handle paging out
+ */
+int page_referenced(struct page *, int is_locked,
+			struct mem_cgroup *memcg, unsigned long *vm_flags);
+int page_referenced_one(struct page *, struct vm_area_struct *,
+	unsigned long address, unsigned int *mapcount, unsigned long *vm_flags);
+
+enum ttu_flags {
+	TTU_UNMAP = 0,			/* unmap mode */
+	TTU_MIGRATION = 1,		/* migration mode */
+	TTU_MUNLOCK = 2,		/* munlock mode */
+	TTU_ACTION_MASK = 0xff,
+
+	TTU_IGNORE_MLOCK = (1 << 8),	/* ignore mlock */
+	TTU_IGNORE_ACCESS = (1 << 9),	/* don't age */
+	TTU_IGNORE_HWPOISON = (1 << 10),/* corrupted page is recoverable */
+};
+#define TTU_ACTION(x) ((x) & TTU_ACTION_MASK)
+
+bool is_vma_temporary_stack(struct vm_area_struct *vma);
+
+int try_to_unmap(struct page *, enum ttu_flags flags);
+int try_to_unmap_one(struct page *, struct vm_area_struct *,
+			unsigned long address, enum ttu_flags flags);
+
+/*
+ * Called from mm/filemap_xip.c to unmap empty zero page
+ */
+pte_t *__page_check_address(struct page *, struct mm_struct *,
+				unsigned long, spinlock_t **, int);
+
+static inline pte_t *page_check_address(struct page *page, struct mm_struct *mm,
+					unsigned long address,
+					spinlock_t **ptlp, int sync)
+{
+	pte_t *ptep;
+
+	__cond_lock(*ptlp, ptep = __page_check_address(page, mm, address,
+						       ptlp, sync));
+	return ptep;
+}
+
+/*
+ * Used by swapoff to help locate where page is expected in vma.
+ */
+unsigned long page_address_in_vma(struct page *, struct vm_area_struct *);
+
+/*
+ * Cleans the PTEs of shared mappings.
+ * (and since clean PTEs should also be readonly, write protects them too)
+ *
+ * returns the number of cleaned PTEs.
+ */
+int page_mkclean(struct page *);
+
+/*
+ * called in munlock()/munmap() path to check for other vmas holding
+ * the page mlocked.
+ */
+int try_to_munlock(struct page *);
+
+/*
+ * Called by memory-failure.c to kill processes.
+ */
+struct anon_vma *page_lock_anon_vma(struct page *page);
+void page_unlock_anon_vma(struct anon_vma *anon_vma);
+int page_mapped_in_vma(struct page *page, struct vm_area_struct *vma);
+
+/*
+ * Called by migrate.c to remove migration ptes, but might be used more later.
+ */
+int rmap_walk(struct page *page, int (*rmap_one)(struct page *,
+		struct vm_area_struct *, unsigned long, void *), void *arg);
+
+#else	/* !CONFIG_MMU */
+
+#define anon_vma_init()		do {} while (0)
+#define anon_vma_prepare(vma)	(0)
+#define anon_vma_link(vma)	do {} while (0)
+
+static inline int page_referenced(struct page *page, int is_locked,
+				  struct mem_cgroup *memcg,
+				  unsigned long *vm_flags)
+{
+	*vm_flags = 0;
+	return 0;
+}
+
+#define try_to_unmap(page, refs) SWAP_FAIL
+
+static inline int page_mkclean(struct page *page)
+{
+	return 0;
+}
+
+
+#endif	/* CONFIG_MMU */
+
+/*
+ * Return values of try_to_unmap
+ */
+#define SWAP_SUCCESS	0
+#define SWAP_AGAIN	1
+#define SWAP_FAIL	2
+#define SWAP_MLOCK	3
+
+#endif	/* _LINUX_RMAP_H */
diff --git a/include/linux/romfs_fs.h b/include/linux/romfs_fs.h
new file mode 100644
index 00000000..5f57f93b
--- /dev/null
+++ b/include/linux/romfs_fs.h
@@ -0,0 +1,59 @@
+#ifndef __LINUX_ROMFS_FS_H
+#define __LINUX_ROMFS_FS_H
+
+#include <linux/types.h>
+#include <linux/fs.h>
+
+/* The basic structures of the romfs filesystem */
+
+#define ROMBSIZE BLOCK_SIZE
+#define ROMBSBITS BLOCK_SIZE_BITS
+#define ROMBMASK (ROMBSIZE-1)
+#define ROMFS_MAGIC 0x7275
+
+#define ROMFS_MAXFN 128
+
+#define __mkw(h,l) (((h)&0x00ff)<< 8|((l)&0x00ff))
+#define __mkl(h,l) (((h)&0xffff)<<16|((l)&0xffff))
+#define __mk4(a,b,c,d) cpu_to_be32(__mkl(__mkw(a,b),__mkw(c,d)))
+#define ROMSB_WORD0 __mk4('-','r','o','m')
+#define ROMSB_WORD1 __mk4('1','f','s','-')
+
+/* On-disk "super block" */
+
+struct romfs_super_block {
+	__be32 word0;
+	__be32 word1;
+	__be32 size;
+	__be32 checksum;
+	char name[0];		/* volume name */
+};
+
+/* On disk inode */
+
+struct romfs_inode {
+	__be32 next;		/* low 4 bits see ROMFH_ */
+	__be32 spec;
+	__be32 size;
+	__be32 checksum;
+	char name[0];
+};
+
+#define ROMFH_TYPE 7
+#define ROMFH_HRD 0
+#define ROMFH_DIR 1
+#define ROMFH_REG 2
+#define ROMFH_SYM 3
+#define ROMFH_BLK 4
+#define ROMFH_CHR 5
+#define ROMFH_SCK 6
+#define ROMFH_FIF 7
+#define ROMFH_EXEC 8
+
+/* Alignment */
+
+#define ROMFH_SIZE 16
+#define ROMFH_PAD (ROMFH_SIZE-1)
+#define ROMFH_MASK (~ROMFH_PAD)
+
+#endif
diff --git a/include/linux/root_dev.h b/include/linux/root_dev.h
new file mode 100644
index 00000000..ed241aad
--- /dev/null
+++ b/include/linux/root_dev.h
@@ -0,0 +1,23 @@
+#ifndef _ROOT_DEV_H_
+#define _ROOT_DEV_H_
+
+#include <linux/major.h>
+#include <linux/types.h>
+#include <linux/kdev_t.h>
+
+enum {
+	Root_NFS = MKDEV(UNNAMED_MAJOR, 255),
+	Root_RAM0 = MKDEV(RAMDISK_MAJOR, 0),
+	Root_RAM1 = MKDEV(RAMDISK_MAJOR, 1),
+	Root_FD0 = MKDEV(FLOPPY_MAJOR, 0),
+	Root_HDA1 = MKDEV(IDE0_MAJOR, 1),
+	Root_HDA2 = MKDEV(IDE0_MAJOR, 2),
+	Root_SDA1 = MKDEV(SCSI_DISK0_MAJOR, 1),
+	Root_SDA2 = MKDEV(SCSI_DISK0_MAJOR, 2),
+	Root_HDC1 = MKDEV(IDE1_MAJOR, 1),
+	Root_SR0 = MKDEV(SCSI_CDROM_MAJOR, 0),
+};
+
+extern dev_t ROOT_DEV;
+
+#endif
diff --git a/include/linux/rose.h b/include/linux/rose.h
new file mode 100644
index 00000000..1fcfe958
--- /dev/null
+++ b/include/linux/rose.h
@@ -0,0 +1,90 @@
+/*
+ * These are the public elements of the Linux kernel Rose implementation.
+ * For kernel AX.25 see the file ax25.h. This file requires ax25.h for the
+ * definition of the ax25_address structure.
+ */
+
+#ifndef	ROSE_KERNEL_H
+#define	ROSE_KERNEL_H
+
+#include <linux/socket.h>
+#include <linux/ax25.h>
+
+#define ROSE_MTU	251
+
+#define ROSE_MAX_DIGIS 6
+
+#define	ROSE_DEFER	1
+#define ROSE_T1		2
+#define	ROSE_T2		3
+#define	ROSE_T3		4
+#define	ROSE_IDLE	5
+#define	ROSE_QBITINCL	6
+#define	ROSE_HOLDBACK	7
+
+#define	SIOCRSGCAUSE		(SIOCPROTOPRIVATE+0)
+#define	SIOCRSSCAUSE		(SIOCPROTOPRIVATE+1)
+#define	SIOCRSL2CALL		(SIOCPROTOPRIVATE+2)
+#define	SIOCRSSL2CALL		(SIOCPROTOPRIVATE+2)
+#define	SIOCRSACCEPT		(SIOCPROTOPRIVATE+3)
+#define	SIOCRSCLRRT		(SIOCPROTOPRIVATE+4)
+#define	SIOCRSGL2CALL		(SIOCPROTOPRIVATE+5)
+#define	SIOCRSGFACILITIES	(SIOCPROTOPRIVATE+6)
+
+#define	ROSE_DTE_ORIGINATED	0x00
+#define	ROSE_NUMBER_BUSY	0x01
+#define	ROSE_INVALID_FACILITY	0x03
+#define	ROSE_NETWORK_CONGESTION	0x05
+#define	ROSE_OUT_OF_ORDER	0x09
+#define	ROSE_ACCESS_BARRED	0x0B
+#define	ROSE_NOT_OBTAINABLE	0x0D
+#define	ROSE_REMOTE_PROCEDURE	0x11
+#define	ROSE_LOCAL_PROCEDURE	0x13
+#define	ROSE_SHIP_ABSENT	0x39
+
+typedef struct {
+	char		rose_addr[5];
+} rose_address;
+
+struct sockaddr_rose {
+	__kernel_sa_family_t srose_family;
+	rose_address	srose_addr;
+	ax25_address	srose_call;
+	int		srose_ndigis;
+	ax25_address	srose_digi;
+};
+
+struct full_sockaddr_rose {
+	__kernel_sa_family_t srose_family;
+	rose_address	srose_addr;
+	ax25_address	srose_call;
+	unsigned int	srose_ndigis;
+	ax25_address	srose_digis[ROSE_MAX_DIGIS];
+};
+
+struct rose_route_struct {
+	rose_address	address;
+	unsigned short	mask;
+	ax25_address	neighbour;
+	char		device[16];
+	unsigned char	ndigis;
+	ax25_address	digipeaters[AX25_MAX_DIGIS];
+};
+
+struct rose_cause_struct {
+	unsigned char	cause;
+	unsigned char	diagnostic;
+};
+
+struct rose_facilities_struct {
+	rose_address	source_addr,   dest_addr;
+	ax25_address	source_call,   dest_call;
+	unsigned char	source_ndigis, dest_ndigis;
+	ax25_address	source_digis[ROSE_MAX_DIGIS];
+	ax25_address	dest_digis[ROSE_MAX_DIGIS];
+	unsigned int	rand;
+	rose_address	fail_addr;
+	ax25_address	fail_call;
+};
+
+#endif
diff --git a/include/linux/rotary_encoder.h b/include/linux/rotary_encoder.h
new file mode 100644
index 00000000..3f594dce
--- /dev/null
+++ b/include/linux/rotary_encoder.h
@@ -0,0 +1,16 @@
+#ifndef __ROTARY_ENCODER_H__
+#define __ROTARY_ENCODER_H__
+
+struct rotary_encoder_platform_data {
+	unsigned int steps;
+	unsigned int axis;
+	unsigned int gpio_a;
+	unsigned int gpio_b;
+	unsigned int inverted_a;
+	unsigned int inverted_b;
+	bool relative_axis;
+	bool rollover;
+	bool half_period;
+};
+
+#endif /* __ROTARY_ENCODER_H__ */
diff --git a/include/linux/route.h b/include/linux/route.h
new file mode 100644
index 00000000..66007083
--- /dev/null
+++ b/include/linux/route.h
@@ -0,0 +1,69 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the IP router interface.
+ *
+ * Version:	@(#)route.h	1.0.3	05/27/93
+ *
+ * Authors:	Original taken from Berkeley UNIX 4.3, (c) UCB 1986-1988
+ *		for the purposes of compatibility only.
+ *
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ * Changes:
+ *              Mike McLagan    :       Routing by source
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_ROUTE_H
+#define _LINUX_ROUTE_H
+
+#include <linux/if.h>
+#include <linux/compiler.h>
+
+/* This structure gets passed by the SIOCADDRT and SIOCDELRT calls. */
+struct rtentry {
+	unsigned long	rt_pad1;
+	struct sockaddr	rt_dst;		/* target address		*/
+	struct sockaddr	rt_gateway;	/* gateway addr (RTF_GATEWAY)	*/
+	struct sockaddr	rt_genmask;	/* target network mask (IP)	*/
+	unsigned short	rt_flags;
+	short		rt_pad2;
+	unsigned long	rt_pad3;
+	void		*rt_pad4;
+	short		rt_metric;	/* +1 for binary compatibility!	*/
+	char __user	*rt_dev;	/* forcing the device at add	*/
+	unsigned long	rt_mtu;		/* per route MTU/Window 	*/
+#ifndef __KERNEL__
+#define rt_mss	rt_mtu			/* Compatibility :-(            */
+#endif
+	unsigned long	rt_window;	/* Window clamping 		*/
+	unsigned short	rt_irtt;	/* Initial RTT			*/
+};
+
+
+#define	RTF_UP		0x0001		/* route usable		  	*/
+#define	RTF_GATEWAY	0x0002		/* destination is a gateway	*/
+#define	RTF_HOST	0x0004		/* host entry (net otherwise)	*/
+#define RTF_REINSTATE	0x0008		/* reinstate route after tmout	*/
+#define	RTF_DYNAMIC	0x0010		/* created dyn. (by redirect)	*/
+#define	RTF_MODIFIED	0x0020		/* modified dyn. (by redirect)	*/
+#define RTF_MTU		0x0040		/* specific MTU for this route	*/
+#define RTF_MSS		RTF_MTU		/* Compatibility :-(		*/
+#define RTF_WINDOW	0x0080		/* per route window clamping	*/
+#define RTF_IRTT	0x0100		/* Initial round trip time	*/
+#define RTF_REJECT	0x0200		/* Reject route			*/
+
+/*
+ *	<linux/ipv6_route.h> uses RTF values >= 64k
+ */
+
+
+
+#endif	/* _LINUX_ROUTE_H */
+
diff --git a/include/linux/rpmsg.h b/include/linux/rpmsg.h
new file mode 100644
index 00000000..82a67390
--- /dev/null
+++ b/include/linux/rpmsg.h
@@ -0,0 +1,332 @@
+/*
+ * Remote processor messaging
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Copyright (C) 2011 Google, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in
+ *   the documentation and/or other materials provided with the
+ *   distribution.
+ * * Neither the name Texas Instruments nor the names of its
+ *   contributors may be used to endorse or promote products derived
+ *   from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _LINUX_RPMSG_H
+#define _LINUX_RPMSG_H
+
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/kref.h>
+#include <linux/mutex.h>
+
+/* The feature bitmap for virtio rpmsg */
+#define VIRTIO_RPMSG_F_NS	0 /* RP supports name service notifications */
+
+/**
+ * struct rpmsg_hdr - common header for all rpmsg messages
+ * @src: source address
+ * @dst: destination address
+ * @reserved: reserved for future use
+ * @len: length of payload (in bytes)
+ * @flags: message flags
+ * @data: @len bytes of message payload data
+ *
+ * Every message sent(/received) on the rpmsg bus begins with this header.
+ */
+struct rpmsg_hdr {
+	u32 src;
+	u32 dst;
+	u32 reserved;
+	u16 len;
+	u16 flags;
+	u8 data[0];
+} __packed;
+
+/**
+ * struct rpmsg_ns_msg - dynamic name service announcement message
+ * @name: name of remote service that is published
+ * @addr: address of remote service that is published
+ * @flags: indicates whether service is created or destroyed
+ *
+ * This message is sent across to publish a new service, or announce
+ * about its removal. When we receive these messages, an appropriate
+ * rpmsg channel (i.e device) is created/destroyed. In turn, the ->probe()
+ * or ->remove() handler of the appropriate rpmsg driver will be invoked
+ * (if/as-soon-as one is registered).
+ */
+struct rpmsg_ns_msg {
+	char name[RPMSG_NAME_SIZE];
+	u32 addr;
+	u32 flags;
+} __packed;
+
+/**
+ * enum rpmsg_ns_flags - dynamic name service announcement flags
+ *
+ * @RPMSG_NS_CREATE: a new remote service was just created
+ * @RPMSG_NS_DESTROY: a known remote service was just destroyed
+ */
+enum rpmsg_ns_flags {
+	RPMSG_NS_CREATE		= 0,
+	RPMSG_NS_DESTROY	= 1,
+};
+
+#define RPMSG_ADDR_ANY		0xFFFFFFFF
+
+struct virtproc_info;
+
+/**
+ * rpmsg_channel - devices that belong to the rpmsg bus are called channels
+ * @vrp: the remote processor this channel belongs to
+ * @dev: the device struct
+ * @id: device id (used to match between rpmsg drivers and devices)
+ * @src: local address
+ * @dst: destination address
+ * @ept: the rpmsg endpoint of this channel
+ * @announce: if set, rpmsg will announce the creation/removal of this channel
+ */
+struct rpmsg_channel {
+	struct virtproc_info *vrp;
+	struct device dev;
+	struct rpmsg_device_id id;
+	u32 src;
+	u32 dst;
+	struct rpmsg_endpoint *ept;
+	bool announce;
+};
+
+typedef void (*rpmsg_rx_cb_t)(struct rpmsg_channel *, void *, int, void *, u32);
+
+/**
+ * struct rpmsg_endpoint - binds a local rpmsg address to its user
+ * @rpdev: rpmsg channel device
+ * @refcount: when this drops to zero, the ept is deallocated
+ * @cb: rx callback handler
+ * @cb_lock: must be taken before accessing/changing @cb
+ * @addr: local rpmsg address
+ * @priv: private data for the driver's use
+ *
+ * In essence, an rpmsg endpoint represents a listener on the rpmsg bus, as
+ * it binds an rpmsg address with an rx callback handler.
+ *
+ * Simple rpmsg drivers shouldn't use this struct directly, because
+ * things just work: every rpmsg driver provides an rx callback upon
+ * registering to the bus, and that callback is then bound to its rpmsg
+ * address when the driver is probed. When relevant inbound messages arrive
+ * (i.e. messages which their dst address equals to the src address of
+ * the rpmsg channel), the driver's handler is invoked to process it.
+ *
+ * More complicated drivers though, that do need to allocate additional rpmsg
+ * addresses, and bind them to different rx callbacks, must explicitly
+ * create additional endpoints by themselves (see rpmsg_create_ept()).
+ */
+struct rpmsg_endpoint {
+	struct rpmsg_channel *rpdev;
+	struct kref refcount;
+	rpmsg_rx_cb_t cb;
+	struct mutex cb_lock;
+	u32 addr;
+	void *priv;
+};
+
+/**
+ * struct rpmsg_driver - rpmsg driver struct
+ * @drv: underlying device driver
+ * @id_table: rpmsg ids serviced by this driver
+ * @probe: invoked when a matching rpmsg channel (i.e. device) is found
+ * @remove: invoked when the rpmsg channel is removed
+ * @callback: invoked when an inbound message is received on the channel
+ */
+struct rpmsg_driver {
+	struct device_driver drv;
+	const struct rpmsg_device_id *id_table;
+	int (*probe)(struct rpmsg_channel *dev);
+	void (*remove)(struct rpmsg_channel *dev);
+	void (*callback)(struct rpmsg_channel *, void *, int, void *, u32);
+};
+
+int register_rpmsg_device(struct rpmsg_channel *dev);
+void unregister_rpmsg_device(struct rpmsg_channel *dev);
+int register_rpmsg_driver(struct rpmsg_driver *drv);
+void unregister_rpmsg_driver(struct rpmsg_driver *drv);
+void rpmsg_destroy_ept(struct rpmsg_endpoint *);
+struct rpmsg_endpoint *rpmsg_create_ept(struct rpmsg_channel *,
+				rpmsg_rx_cb_t cb, void *priv, u32 addr);
+int
+rpmsg_send_offchannel_raw(struct rpmsg_channel *, u32, u32, void *, int, bool);
+
+/**
+ * rpmsg_send() - send a message across to the remote processor
+ * @rpdev: the rpmsg channel
+ * @data: payload of message
+ * @len: length of payload
+ *
+ * This function sends @data of length @len on the @rpdev channel.
+ * The message will be sent to the remote processor which the @rpdev
+ * channel belongs to, using @rpdev's source and destination addresses.
+ * In case there are no TX buffers available, the function will block until
+ * one becomes available, or a timeout of 15 seconds elapses. When the latter
+ * happens, -ERESTARTSYS is returned.
+ *
+ * Can only be called from process context (for now).
+ *
+ * Returns 0 on success and an appropriate error value on failure.
+ */
+static inline int rpmsg_send(struct rpmsg_channel *rpdev, void *data, int len)
+{
+	u32 src = rpdev->src, dst = rpdev->dst;
+
+	return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true);
+}
+
+/**
+ * rpmsg_sendto() - send a message across to the remote processor, specify dst
+ * @rpdev: the rpmsg channel
+ * @data: payload of message
+ * @len: length of payload
+ * @dst: destination address
+ *
+ * This function sends @data of length @len to the remote @dst address.
+ * The message will be sent to the remote processor which the @rpdev
+ * channel belongs to, using @rpdev's source address.
+ * In case there are no TX buffers available, the function will block until
+ * one becomes available, or a timeout of 15 seconds elapses. When the latter
+ * happens, -ERESTARTSYS is returned.
+ *
+ * Can only be called from process context (for now).
+ *
+ * Returns 0 on success and an appropriate error value on failure.
+ */
+static inline
+int rpmsg_sendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst)
+{
+	u32 src = rpdev->src;
+
+	return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true);
+}
+
+/**
+ * rpmsg_send_offchannel() - send a message using explicit src/dst addresses
+ * @rpdev: the rpmsg channel
+ * @src: source address
+ * @dst: destination address
+ * @data: payload of message
+ * @len: length of payload
+ *
+ * This function sends @data of length @len to the remote @dst address,
+ * and uses @src as the source address.
+ * The message will be sent to the remote processor which the @rpdev
+ * channel belongs to.
+ * In case there are no TX buffers available, the function will block until
+ * one becomes available, or a timeout of 15 seconds elapses. When the latter
+ * happens, -ERESTARTSYS is returned.
+ *
+ * Can only be called from process context (for now).
+ *
+ * Returns 0 on success and an appropriate error value on failure.
+ */
+static inline
+int rpmsg_send_offchannel(struct rpmsg_channel *rpdev, u32 src, u32 dst,
+							void *data, int len)
+{
+	return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true);
+}
+
+/**
+ * rpmsg_send() - send a message across to the remote processor
+ * @rpdev: the rpmsg channel
+ * @data: payload of message
+ * @len: length of payload
+ *
+ * This function sends @data of length @len on the @rpdev channel.
+ * The message will be sent to the remote processor which the @rpdev
+ * channel belongs to, using @rpdev's source and destination addresses.
+ * In case there are no TX buffers available, the function will immediately
+ * return -ENOMEM without waiting until one becomes available.
+ *
+ * Can only be called from process context (for now).
+ *
+ * Returns 0 on success and an appropriate error value on failure.
+ */
+static inline
+int rpmsg_trysend(struct rpmsg_channel *rpdev, void *data, int len)
+{
+	u32 src = rpdev->src, dst = rpdev->dst;
+
+	return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false);
+}
+
+/**
+ * rpmsg_sendto() - send a message across to the remote processor, specify dst
+ * @rpdev: the rpmsg channel
+ * @data: payload of message
+ * @len: length of payload
+ * @dst: destination address
+ *
+ * This function sends @data of length @len to the remote @dst address.
+ * The message will be sent to the remote processor which the @rpdev
+ * channel belongs to, using @rpdev's source address.
+ * In case there are no TX buffers available, the function will immediately
+ * return -ENOMEM without waiting until one becomes available.
+ *
+ * Can only be called from process context (for now).
+ *
+ * Returns 0 on success and an appropriate error value on failure.
+ */
+static inline
+int rpmsg_trysendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst)
+{
+	u32 src = rpdev->src;
+
+	return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false);
+}
+
+/**
+ * rpmsg_send_offchannel() - send a message using explicit src/dst addresses
+ * @rpdev: the rpmsg channel
+ * @src: source address
+ * @dst: destination address
+ * @data: payload of message
+ * @len: length of payload
+ *
+ * This function sends @data of length @len to the remote @dst address,
+ * and uses @src as the source address.
+ * The message will be sent to the remote processor which the @rpdev
+ * channel belongs to.
+ * In case there are no TX buffers available, the function will immediately
+ * return -ENOMEM without waiting until one becomes available.
+ *
+ * Can only be called from process context (for now).
+ *
+ * Returns 0 on success and an appropriate error value on failure.
+ */
+static inline
+int rpmsg_trysend_offchannel(struct rpmsg_channel *rpdev, u32 src, u32 dst,
+							void *data, int len)
+{
+	return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false);
+}
+
+#endif /* _LINUX_RPMSG_H */
diff --git a/include/linux/rslib.h b/include/linux/rslib.h
new file mode 100644
index 00000000..746580c1
--- /dev/null
+++ b/include/linux/rslib.h
@@ -0,0 +1,109 @@
+/*
+ * include/linux/rslib.h
+ *
+ * Overview:
+ *   Generic Reed Solomon encoder / decoder library
+ *
+ * Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de)
+ *
+ * RS code lifted from reed solomon library written by Phil Karn
+ * Copyright 2002 Phil Karn, KA9Q
+ *
+ * $Id: rslib.h,v 1.4 2005/11/07 11:14:52 gleixner Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _RSLIB_H_
+#define _RSLIB_H_
+
+#include <linux/list.h>
+
+/**
+ * struct rs_control - rs control structure
+ *
+ * @mm:		Bits per symbol
+ * @nn:		Symbols per block (= (1<<mm)-1)
+ * @alpha_to:	log lookup table
+ * @index_of:	Antilog lookup table
+ * @genpoly:	Generator polynomial
+ * @nroots:	Number of generator roots = number of parity symbols
+ * @fcr:	First consecutive root, index form
+ * @prim:	Primitive element, index form
+ * @iprim:	prim-th root of 1, index form
+ * @gfpoly:	The primitive generator polynominal
+ * @gffunc:	Function to generate the field, if non-canonical representation
+ * @users:	Users of this structure
+ * @list:	List entry for the rs control list
+*/
+struct rs_control {
+	int 		mm;
+	int 		nn;
+	uint16_t	*alpha_to;
+	uint16_t	*index_of;
+	uint16_t	*genpoly;
+	int 		nroots;
+	int 		fcr;
+	int 		prim;
+	int 		iprim;
+	int		gfpoly;
+	int		(*gffunc)(int);
+	int		users;
+	struct list_head list;
+};
+
+/* General purpose RS codec, 8-bit data width, symbol width 1-15 bit  */
+#ifdef CONFIG_REED_SOLOMON_ENC8
+int encode_rs8(struct rs_control *rs, uint8_t *data, int len, uint16_t *par,
+	       uint16_t invmsk);
+#endif
+#ifdef CONFIG_REED_SOLOMON_DEC8
+int decode_rs8(struct rs_control *rs, uint8_t *data, uint16_t *par, int len,
+		uint16_t *s, int no_eras, int *eras_pos, uint16_t invmsk,
+	       uint16_t *corr);
+#endif
+
+/* General purpose RS codec, 16-bit data width, symbol width 1-15 bit  */
+#ifdef CONFIG_REED_SOLOMON_ENC16
+int encode_rs16(struct rs_control *rs, uint16_t *data, int len, uint16_t *par,
+		uint16_t invmsk);
+#endif
+#ifdef CONFIG_REED_SOLOMON_DEC16
+int decode_rs16(struct rs_control *rs, uint16_t *data, uint16_t *par, int len,
+		uint16_t *s, int no_eras, int *eras_pos, uint16_t invmsk,
+		uint16_t *corr);
+#endif
+
+/* Create or get a matching rs control structure */
+struct rs_control *init_rs(int symsize, int gfpoly, int fcr, int prim,
+			   int nroots);
+struct rs_control *init_rs_non_canonical(int symsize, int (*func)(int),
+                                         int fcr, int prim, int nroots);
+
+/* Release a rs control structure */
+void free_rs(struct rs_control *rs);
+
+/** modulo replacement for galois field arithmetics
+ *
+ *  @rs:	the rs control structure
+ *  @x:		the value to reduce
+ *
+ *  where
+ *  rs->mm = number of bits per symbol
+ *  rs->nn = (2^rs->mm) - 1
+ *
+ *  Simple arithmetic modulo would return a wrong result for values
+ *  >= 3 * rs->nn
+*/
+static inline int rs_modnn(struct rs_control *rs, int x)
+{
+	while (x >= rs->nn) {
+		x -= rs->nn;
+		x = (x >> rs->mm) + (x & rs->nn);
+	}
+	return x;
+}
+
+#endif
diff --git a/include/linux/rtc-v3020.h b/include/linux/rtc-v3020.h
new file mode 100644
index 00000000..e55d82ce
--- /dev/null
+++ b/include/linux/rtc-v3020.h
@@ -0,0 +1,41 @@
+/*
+ * v3020.h - Registers definition and platform data structure for the v3020 RTC.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006, 8D Technologies inc.
+ */
+#ifndef __LINUX_V3020_H
+#define __LINUX_V3020_H
+
+/* The v3020 has only one data pin but which one
+ * is used depends on the board. */
+struct v3020_platform_data {
+	int leftshift; /* (1<<(leftshift)) & readl() */
+
+	unsigned int use_gpio:1;
+	unsigned int gpio_cs;
+	unsigned int gpio_wr;
+	unsigned int gpio_rd;
+	unsigned int gpio_io;
+};
+
+#define V3020_STATUS_0	0x00
+#define V3020_STATUS_1	0x01
+#define V3020_SECONDS	0x02
+#define V3020_MINUTES	0x03
+#define V3020_HOURS		0x04
+#define V3020_MONTH_DAY	0x05
+#define V3020_MONTH		0x06
+#define V3020_YEAR		0x07
+#define V3020_WEEK_DAY	0x08
+#define V3020_WEEK		0x09
+
+#define V3020_IS_COMMAND(val) ((val)>=0x0E)
+
+#define V3020_CMD_RAM2CLOCK	0x0E
+#define V3020_CMD_CLOCK2RAM	0x0F
+
+#endif /* __LINUX_V3020_H */
diff --git a/include/linux/rtc.h b/include/linux/rtc.h
new file mode 100644
index 00000000..fcabfb48
--- /dev/null
+++ b/include/linux/rtc.h
@@ -0,0 +1,284 @@
+/*
+ * Generic RTC interface.
+ * This version contains the part of the user interface to the Real Time Clock
+ * service. It is used with both the legacy mc146818 and also  EFI
+ * Struct rtc_time and first 12 ioctl by Paul Gortmaker, 1996 - separated out
+ * from <linux/mc146818rtc.h> to this file for 2.4 kernels.
+ *
+ * Copyright (C) 1999 Hewlett-Packard Co.
+ * Copyright (C) 1999 Stephane Eranian <eranian@hpl.hp.com>
+ */
+#ifndef _LINUX_RTC_H_
+#define _LINUX_RTC_H_
+
+/*
+ * The struct used to pass data via the following ioctl. Similar to the
+ * struct tm in <time.h>, but it needs to be here so that the kernel
+ * source is self contained, allowing cross-compiles, etc. etc.
+ */
+
+struct rtc_time {
+	int tm_sec;
+	int tm_min;
+	int tm_hour;
+	int tm_mday;
+	int tm_mon;
+	int tm_year;
+	int tm_wday;
+	int tm_yday;
+	int tm_isdst;
+};
+
+/*
+ * This data structure is inspired by the EFI (v0.92) wakeup
+ * alarm API.
+ */
+struct rtc_wkalrm {
+	unsigned char enabled;	/* 0 = alarm disabled, 1 = alarm enabled */
+	unsigned char pending;  /* 0 = alarm not pending, 1 = alarm pending */
+	struct rtc_time time;	/* time the alarm is set to */
+};
+
+/*
+ * Data structure to control PLL correction some better RTC feature
+ * pll_value is used to get or set current value of correction,
+ * the rest of the struct is used to query HW capabilities.
+ * This is modeled after the RTC used in Q40/Q60 computers but
+ * should be sufficiently flexible for other devices
+ *
+ * +ve pll_value means clock will run faster by
+ *   pll_value*pll_posmult/pll_clock
+ * -ve pll_value means clock will run slower by
+ *   pll_value*pll_negmult/pll_clock
+ */
+
+struct rtc_pll_info {
+	int pll_ctrl;       /* placeholder for fancier control */
+	int pll_value;      /* get/set correction value */
+	int pll_max;        /* max +ve (faster) adjustment value */
+	int pll_min;        /* max -ve (slower) adjustment value */
+	int pll_posmult;    /* factor for +ve correction */
+	int pll_negmult;    /* factor for -ve correction */
+	long pll_clock;     /* base PLL frequency */
+};
+
+/*
+ * ioctl calls that are permitted to the /dev/rtc interface, if
+ * any of the RTC drivers are enabled.
+ */
+
+#define RTC_AIE_ON	_IO('p', 0x01)	/* Alarm int. enable on		*/
+#define RTC_AIE_OFF	_IO('p', 0x02)	/* ... off			*/
+#define RTC_UIE_ON	_IO('p', 0x03)	/* Update int. enable on	*/
+#define RTC_UIE_OFF	_IO('p', 0x04)	/* ... off			*/
+#define RTC_PIE_ON	_IO('p', 0x05)	/* Periodic int. enable on	*/
+#define RTC_PIE_OFF	_IO('p', 0x06)	/* ... off			*/
+#define RTC_WIE_ON	_IO('p', 0x0f)  /* Watchdog int. enable on	*/
+#define RTC_WIE_OFF	_IO('p', 0x10)  /* ... off			*/
+
+#define RTC_ALM_SET	_IOW('p', 0x07, struct rtc_time) /* Set alarm time  */
+#define RTC_ALM_READ	_IOR('p', 0x08, struct rtc_time) /* Read alarm time */
+#define RTC_RD_TIME	_IOR('p', 0x09, struct rtc_time) /* Read RTC time   */
+#define RTC_SET_TIME	_IOW('p', 0x0a, struct rtc_time) /* Set RTC time    */
+#define RTC_IRQP_READ	_IOR('p', 0x0b, unsigned long)	 /* Read IRQ rate   */
+#define RTC_IRQP_SET	_IOW('p', 0x0c, unsigned long)	 /* Set IRQ rate    */
+#define RTC_EPOCH_READ	_IOR('p', 0x0d, unsigned long)	 /* Read epoch      */
+#define RTC_EPOCH_SET	_IOW('p', 0x0e, unsigned long)	 /* Set epoch       */
+
+#define RTC_WKALM_SET	_IOW('p', 0x0f, struct rtc_wkalrm)/* Set wakeup alarm*/
+#define RTC_WKALM_RD	_IOR('p', 0x10, struct rtc_wkalrm)/* Get wakeup alarm*/
+
+#define RTC_PLL_GET	_IOR('p', 0x11, struct rtc_pll_info)  /* Get PLL correction */
+#define RTC_PLL_SET	_IOW('p', 0x12, struct rtc_pll_info)  /* Set PLL correction */
+
+/* interrupt flags */
+#define RTC_IRQF 0x80	/* Any of the following is active */
+#define RTC_PF 0x40	/* Periodic interrupt */
+#define RTC_AF 0x20	/* Alarm interrupt */
+#define RTC_UF 0x10	/* Update interrupt for 1Hz RTC */
+
+
+#define RTC_MAX_FREQ	8192
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/interrupt.h>
+
+extern int rtc_month_days(unsigned int month, unsigned int year);
+extern int rtc_year_days(unsigned int day, unsigned int month, unsigned int year);
+extern int rtc_valid_tm(struct rtc_time *tm);
+extern int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time);
+extern void rtc_time_to_tm(unsigned long time, struct rtc_time *tm);
+ktime_t rtc_tm_to_ktime(struct rtc_time tm);
+struct rtc_time rtc_ktime_to_tm(ktime_t kt);
+
+
+#include <linux/device.h>
+#include <linux/seq_file.h>
+#include <linux/cdev.h>
+#include <linux/poll.h>
+#include <linux/mutex.h>
+#include <linux/timerqueue.h>
+#include <linux/workqueue.h>
+
+extern struct class *rtc_class;
+
+/*
+ * For these RTC methods the device parameter is the physical device
+ * on whatever bus holds the hardware (I2C, Platform, SPI, etc), which
+ * was passed to rtc_device_register().  Its driver_data normally holds
+ * device state, including the rtc_device pointer for the RTC.
+ *
+ * Most of these methods are called with rtc_device.ops_lock held,
+ * through the rtc_*(struct rtc_device *, ...) calls.
+ *
+ * The (current) exceptions are mostly filesystem hooks:
+ *   - the proc() hook for procfs
+ *   - non-ioctl() chardev hooks:  open(), release(), read_callback()
+ *
+ * REVISIT those periodic irq calls *do* have ops_lock when they're
+ * issued through ioctl() ...
+ */
+struct rtc_class_ops {
+	int (*open)(struct device *);
+	void (*release)(struct device *);
+	int (*ioctl)(struct device *, unsigned int, unsigned long);
+	int (*read_time)(struct device *, struct rtc_time *);
+	int (*set_time)(struct device *, struct rtc_time *);
+	int (*read_alarm)(struct device *, struct rtc_wkalrm *);
+	int (*set_alarm)(struct device *, struct rtc_wkalrm *);
+	int (*proc)(struct device *, struct seq_file *);
+	int (*set_mmss)(struct device *, unsigned long secs);
+	int (*read_callback)(struct device *, int data);
+	int (*alarm_irq_enable)(struct device *, unsigned int enabled);
+};
+
+#define RTC_DEVICE_NAME_SIZE 20
+typedef struct rtc_task {
+	void (*func)(void *private_data);
+	void *private_data;
+} rtc_task_t;
+
+
+struct rtc_timer {
+	struct rtc_task	task;
+	struct timerqueue_node node;
+	ktime_t period;
+	int enabled;
+};
+
+
+/* flags */
+#define RTC_DEV_BUSY 0
+
+struct rtc_device
+{
+	struct device dev;
+	struct module *owner;
+
+	int id;
+	char name[RTC_DEVICE_NAME_SIZE];
+
+	const struct rtc_class_ops *ops;
+	struct mutex ops_lock;
+
+	struct cdev char_dev;
+	unsigned long flags;
+
+	unsigned long irq_data;
+	spinlock_t irq_lock;
+	wait_queue_head_t irq_queue;
+	struct fasync_struct *async_queue;
+
+	struct rtc_task *irq_task;
+	spinlock_t irq_task_lock;
+	int irq_freq;
+	int max_user_freq;
+
+	struct timerqueue_head timerqueue;
+	struct rtc_timer aie_timer;
+	struct rtc_timer uie_rtctimer;
+	struct hrtimer pie_timer; /* sub second exp, so needs hrtimer */
+	int pie_enabled;
+	struct work_struct irqwork;
+	/* Some hardware can't support UIE mode */
+	int uie_unsupported;
+
+#ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL
+	struct work_struct uie_task;
+	struct timer_list uie_timer;
+	/* Those fields are protected by rtc->irq_lock */
+	unsigned int oldsecs;
+	unsigned int uie_irq_active:1;
+	unsigned int stop_uie_polling:1;
+	unsigned int uie_task_active:1;
+	unsigned int uie_timer_active:1;
+#endif
+};
+#define to_rtc_device(d) container_of(d, struct rtc_device, dev)
+
+extern struct rtc_device *rtc_device_register(const char *name,
+					struct device *dev,
+					const struct rtc_class_ops *ops,
+					struct module *owner);
+extern void rtc_device_unregister(struct rtc_device *rtc);
+
+extern int rtc_read_time(struct rtc_device *rtc, struct rtc_time *tm);
+extern int rtc_set_time(struct rtc_device *rtc, struct rtc_time *tm);
+extern int rtc_set_mmss(struct rtc_device *rtc, unsigned long secs);
+int __rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm);
+extern int rtc_read_alarm(struct rtc_device *rtc,
+			struct rtc_wkalrm *alrm);
+extern int rtc_set_alarm(struct rtc_device *rtc,
+				struct rtc_wkalrm *alrm);
+extern int rtc_initialize_alarm(struct rtc_device *rtc,
+				struct rtc_wkalrm *alrm);
+extern void rtc_update_irq(struct rtc_device *rtc,
+			unsigned long num, unsigned long events);
+
+extern struct rtc_device *rtc_class_open(char *name);
+extern void rtc_class_close(struct rtc_device *rtc);
+
+extern int rtc_irq_register(struct rtc_device *rtc,
+				struct rtc_task *task);
+extern void rtc_irq_unregister(struct rtc_device *rtc,
+				struct rtc_task *task);
+extern int rtc_irq_set_state(struct rtc_device *rtc,
+				struct rtc_task *task, int enabled);
+extern int rtc_irq_set_freq(struct rtc_device *rtc,
+				struct rtc_task *task, int freq);
+extern int rtc_update_irq_enable(struct rtc_device *rtc, unsigned int enabled);
+extern int rtc_alarm_irq_enable(struct rtc_device *rtc, unsigned int enabled);
+extern int rtc_dev_update_irq_enable_emul(struct rtc_device *rtc,
+						unsigned int enabled);
+
+void rtc_handle_legacy_irq(struct rtc_device *rtc, int num, int mode);
+void rtc_aie_update_irq(void *private);
+void rtc_uie_update_irq(void *private);
+enum hrtimer_restart rtc_pie_update_irq(struct hrtimer *timer);
+
+int rtc_register(rtc_task_t *task);
+int rtc_unregister(rtc_task_t *task);
+int rtc_control(rtc_task_t *t, unsigned int cmd, unsigned long arg);
+
+void rtc_timer_init(struct rtc_timer *timer, void (*f)(void* p), void* data);
+int rtc_timer_start(struct rtc_device *rtc, struct rtc_timer* timer,
+			ktime_t expires, ktime_t period);
+int rtc_timer_cancel(struct rtc_device *rtc, struct rtc_timer* timer);
+void rtc_timer_do_work(struct work_struct *work);
+
+static inline bool is_leap_year(unsigned int year)
+{
+	return (!(year % 4) && (year % 100)) || !(year % 400);
+}
+
+#ifdef CONFIG_RTC_HCTOSYS
+extern int rtc_hctosys_ret;
+#else
+#define rtc_hctosys_ret -ENODEV
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_RTC_H_ */
diff --git a/include/linux/rtc/m48t59.h b/include/linux/rtc/m48t59.h
new file mode 100644
index 00000000..6fc96145
--- /dev/null
+++ b/include/linux/rtc/m48t59.h
@@ -0,0 +1,64 @@
+/*
+ * include/linux/rtc/m48t59.h
+ *
+ * Definitions for the platform data of m48t59 RTC chip driver.
+ *
+ * Copyright (c) 2007 Wind River Systems, Inc.
+ *
+ * Mark Zhan <rongkai.zhan@windriver.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _LINUX_RTC_M48T59_H_
+#define _LINUX_RTC_M48T59_H_
+
+/*
+ * M48T59 Register Offset
+ */
+#define M48T59_YEAR		0xf
+#define M48T59_MONTH		0xe
+#define M48T59_MDAY		0xd	/* Day of Month */
+#define M48T59_WDAY		0xc	/* Day of Week */
+#define M48T59_WDAY_CB			0x20	/* Century Bit */
+#define M48T59_WDAY_CEB			0x10	/* Century Enable Bit */
+#define M48T59_HOUR		0xb
+#define M48T59_MIN		0xa
+#define M48T59_SEC		0x9
+#define M48T59_CNTL		0x8
+#define M48T59_CNTL_READ		0x40
+#define M48T59_CNTL_WRITE		0x80
+#define M48T59_WATCHDOG		0x7
+#define M48T59_INTR		0x6
+#define M48T59_INTR_AFE			0x80	/* Alarm Interrupt Enable */
+#define M48T59_INTR_ABE			0x20
+#define M48T59_ALARM_DATE	0x5
+#define M48T59_ALARM_HOUR	0x4
+#define M48T59_ALARM_MIN	0x3
+#define M48T59_ALARM_SEC	0x2
+#define M48T59_UNUSED		0x1
+#define M48T59_FLAGS		0x0
+#define M48T59_FLAGS_WDT		0x80	/* watchdog timer expired */
+#define M48T59_FLAGS_AF			0x40	/* alarm */
+#define M48T59_FLAGS_BF			0x10	/* low battery */
+
+#define M48T59RTC_TYPE_M48T59	0 /* to keep compatibility */
+#define M48T59RTC_TYPE_M48T02	1
+#define M48T59RTC_TYPE_M48T08	2
+
+struct m48t59_plat_data {
+	/* The method to access M48T59 registers */
+	void (*write_byte)(struct device *dev, u32 ofs, u8 val);
+	unsigned char (*read_byte)(struct device *dev, u32 ofs);
+
+	int type; /* RTC model */
+
+	/* ioaddr mapped externally */
+	void __iomem *ioaddr;
+	/* offset to RTC registers, automatically set according to the type */
+	unsigned int offset;
+};
+
+#endif /* _LINUX_RTC_M48T59_H_ */
diff --git a/include/linux/rtc/sirfsoc_rtciobrg.h b/include/linux/rtc/sirfsoc_rtciobrg.h
new file mode 100644
index 00000000..2c92e1c8
--- /dev/null
+++ b/include/linux/rtc/sirfsoc_rtciobrg.h
@@ -0,0 +1,18 @@
+/*
+ * RTC I/O Bridge interfaces for CSR SiRFprimaII
+ * ARM access the registers of SYSRTC, GPSRTC and PWRC through this module
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+#ifndef _SIRFSOC_RTC_IOBRG_H_
+#define _SIRFSOC_RTC_IOBRG_H_
+
+extern void sirfsoc_rtc_iobrg_besyncing(void);
+
+extern u32 sirfsoc_rtc_iobrg_readl(u32 addr);
+
+extern void sirfsoc_rtc_iobrg_writel(u32 val, u32 addr);
+
+#endif
diff --git a/include/linux/rtmutex.h b/include/linux/rtmutex.h
new file mode 100644
index 00000000..de171342
--- /dev/null
+++ b/include/linux/rtmutex.h
@@ -0,0 +1,109 @@
+/*
+ * RT Mutexes: blocking mutual exclusion locks with PI support
+ *
+ * started by Ingo Molnar and Thomas Gleixner:
+ *
+ *  Copyright (C) 2004-2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
+ *  Copyright (C) 2006, Timesys Corp., Thomas Gleixner <tglx@timesys.com>
+ *
+ * This file contains the public data structure and API definitions.
+ */
+
+#ifndef __LINUX_RT_MUTEX_H
+#define __LINUX_RT_MUTEX_H
+
+#include <linux/linkage.h>
+#include <linux/plist.h>
+#include <linux/spinlock_types.h>
+
+extern int max_lock_depth; /* for sysctl */
+
+/**
+ * The rt_mutex structure
+ *
+ * @wait_lock:	spinlock to protect the structure
+ * @wait_list:	pilist head to enqueue waiters in priority order
+ * @owner:	the mutex owner
+ */
+struct rt_mutex {
+	raw_spinlock_t		wait_lock;
+	struct plist_head	wait_list;
+	struct task_struct	*owner;
+#ifdef CONFIG_DEBUG_RT_MUTEXES
+	int			save_state;
+	const char 		*name, *file;
+	int			line;
+	void			*magic;
+#endif
+};
+
+struct rt_mutex_waiter;
+struct hrtimer_sleeper;
+
+#ifdef CONFIG_DEBUG_RT_MUTEXES
+ extern int rt_mutex_debug_check_no_locks_freed(const void *from,
+						unsigned long len);
+ extern void rt_mutex_debug_check_no_locks_held(struct task_struct *task);
+#else
+ static inline int rt_mutex_debug_check_no_locks_freed(const void *from,
+						       unsigned long len)
+ {
+	return 0;
+ }
+# define rt_mutex_debug_check_no_locks_held(task)	do { } while (0)
+#endif
+
+#ifdef CONFIG_DEBUG_RT_MUTEXES
+# define __DEBUG_RT_MUTEX_INITIALIZER(mutexname) \
+	, .name = #mutexname, .file = __FILE__, .line = __LINE__
+# define rt_mutex_init(mutex)			__rt_mutex_init(mutex, __func__)
+ extern void rt_mutex_debug_task_free(struct task_struct *tsk);
+#else
+# define __DEBUG_RT_MUTEX_INITIALIZER(mutexname)
+# define rt_mutex_init(mutex)			__rt_mutex_init(mutex, NULL)
+# define rt_mutex_debug_task_free(t)			do { } while (0)
+#endif
+
+#define __RT_MUTEX_INITIALIZER(mutexname) \
+	{ .wait_lock = __RAW_SPIN_LOCK_UNLOCKED(mutexname.wait_lock) \
+	, .wait_list = PLIST_HEAD_INIT(mutexname.wait_list) \
+	, .owner = NULL \
+	__DEBUG_RT_MUTEX_INITIALIZER(mutexname)}
+
+#define DEFINE_RT_MUTEX(mutexname) \
+	struct rt_mutex mutexname = __RT_MUTEX_INITIALIZER(mutexname)
+
+/**
+ * rt_mutex_is_locked - is the mutex locked
+ * @lock: the mutex to be queried
+ *
+ * Returns 1 if the mutex is locked, 0 if unlocked.
+ */
+static inline int rt_mutex_is_locked(struct rt_mutex *lock)
+{
+	return lock->owner != NULL;
+}
+
+extern void __rt_mutex_init(struct rt_mutex *lock, const char *name);
+extern void rt_mutex_destroy(struct rt_mutex *lock);
+
+extern void rt_mutex_lock(struct rt_mutex *lock);
+extern int rt_mutex_lock_interruptible(struct rt_mutex *lock,
+						int detect_deadlock);
+extern int rt_mutex_timed_lock(struct rt_mutex *lock,
+					struct hrtimer_sleeper *timeout,
+					int detect_deadlock);
+
+extern int rt_mutex_trylock(struct rt_mutex *lock);
+
+extern void rt_mutex_unlock(struct rt_mutex *lock);
+
+#ifdef CONFIG_RT_MUTEXES
+# define INIT_RT_MUTEXES(tsk)						\
+	.pi_waiters	= PLIST_HEAD_INIT(tsk.pi_waiters),	\
+	INIT_RT_MUTEX_DEBUG(tsk)
+#else
+# define INIT_RT_MUTEXES(tsk)
+#endif
+
+#endif
diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h
new file mode 100644
index 00000000..577592ea
--- /dev/null
+++ b/include/linux/rtnetlink.h
@@ -0,0 +1,807 @@
+#ifndef __LINUX_RTNETLINK_H
+#define __LINUX_RTNETLINK_H
+
+#include <linux/types.h>
+#include <linux/netlink.h>
+#include <linux/if_link.h>
+#include <linux/if_addr.h>
+#include <linux/neighbour.h>
+
+/* rtnetlink families. Values up to 127 are reserved for real address
+ * families, values above 128 may be used arbitrarily.
+ */
+#define RTNL_FAMILY_IPMR		128
+#define RTNL_FAMILY_IP6MR		129
+#define RTNL_FAMILY_MAX			129
+
+/****
+ *		Routing/neighbour discovery messages.
+ ****/
+
+/* Types of messages */
+
+enum {
+	RTM_BASE	= 16,
+#define RTM_BASE	RTM_BASE
+
+	RTM_NEWLINK	= 16,
+#define RTM_NEWLINK	RTM_NEWLINK
+	RTM_DELLINK,
+#define RTM_DELLINK	RTM_DELLINK
+	RTM_GETLINK,
+#define RTM_GETLINK	RTM_GETLINK
+	RTM_SETLINK,
+#define RTM_SETLINK	RTM_SETLINK
+
+	RTM_NEWADDR	= 20,
+#define RTM_NEWADDR	RTM_NEWADDR
+	RTM_DELADDR,
+#define RTM_DELADDR	RTM_DELADDR
+	RTM_GETADDR,
+#define RTM_GETADDR	RTM_GETADDR
+
+	RTM_NEWROUTE	= 24,
+#define RTM_NEWROUTE	RTM_NEWROUTE
+	RTM_DELROUTE,
+#define RTM_DELROUTE	RTM_DELROUTE
+	RTM_GETROUTE,
+#define RTM_GETROUTE	RTM_GETROUTE
+
+	RTM_NEWNEIGH	= 28,
+#define RTM_NEWNEIGH	RTM_NEWNEIGH
+	RTM_DELNEIGH,
+#define RTM_DELNEIGH	RTM_DELNEIGH
+	RTM_GETNEIGH,
+#define RTM_GETNEIGH	RTM_GETNEIGH
+
+	RTM_NEWRULE	= 32,
+#define RTM_NEWRULE	RTM_NEWRULE
+	RTM_DELRULE,
+#define RTM_DELRULE	RTM_DELRULE
+	RTM_GETRULE,
+#define RTM_GETRULE	RTM_GETRULE
+
+	RTM_NEWQDISC	= 36,
+#define RTM_NEWQDISC	RTM_NEWQDISC
+	RTM_DELQDISC,
+#define RTM_DELQDISC	RTM_DELQDISC
+	RTM_GETQDISC,
+#define RTM_GETQDISC	RTM_GETQDISC
+
+	RTM_NEWTCLASS	= 40,
+#define RTM_NEWTCLASS	RTM_NEWTCLASS
+	RTM_DELTCLASS,
+#define RTM_DELTCLASS	RTM_DELTCLASS
+	RTM_GETTCLASS,
+#define RTM_GETTCLASS	RTM_GETTCLASS
+
+	RTM_NEWTFILTER	= 44,
+#define RTM_NEWTFILTER	RTM_NEWTFILTER
+	RTM_DELTFILTER,
+#define RTM_DELTFILTER	RTM_DELTFILTER
+	RTM_GETTFILTER,
+#define RTM_GETTFILTER	RTM_GETTFILTER
+
+	RTM_NEWACTION	= 48,
+#define RTM_NEWACTION   RTM_NEWACTION
+	RTM_DELACTION,
+#define RTM_DELACTION   RTM_DELACTION
+	RTM_GETACTION,
+#define RTM_GETACTION   RTM_GETACTION
+
+	RTM_NEWPREFIX	= 52,
+#define RTM_NEWPREFIX	RTM_NEWPREFIX
+
+	RTM_GETMULTICAST = 58,
+#define RTM_GETMULTICAST RTM_GETMULTICAST
+
+	RTM_GETANYCAST	= 62,
+#define RTM_GETANYCAST	RTM_GETANYCAST
+
+	RTM_NEWNEIGHTBL	= 64,
+#define RTM_NEWNEIGHTBL	RTM_NEWNEIGHTBL
+	RTM_GETNEIGHTBL	= 66,
+#define RTM_GETNEIGHTBL	RTM_GETNEIGHTBL
+	RTM_SETNEIGHTBL,
+#define RTM_SETNEIGHTBL	RTM_SETNEIGHTBL
+
+	RTM_NEWNDUSEROPT = 68,
+#define RTM_NEWNDUSEROPT RTM_NEWNDUSEROPT
+
+	RTM_NEWADDRLABEL = 72,
+#define RTM_NEWADDRLABEL RTM_NEWADDRLABEL
+	RTM_DELADDRLABEL,
+#define RTM_DELADDRLABEL RTM_DELADDRLABEL
+	RTM_GETADDRLABEL,
+#define RTM_GETADDRLABEL RTM_GETADDRLABEL
+
+	RTM_GETDCB = 78,
+#define RTM_GETDCB RTM_GETDCB
+	RTM_SETDCB,
+#define RTM_SETDCB RTM_SETDCB
+
+	__RTM_MAX,
+#define RTM_MAX		(((__RTM_MAX + 3) & ~3) - 1)
+};
+
+#define RTM_NR_MSGTYPES	(RTM_MAX + 1 - RTM_BASE)
+#define RTM_NR_FAMILIES	(RTM_NR_MSGTYPES >> 2)
+#define RTM_FAM(cmd)	(((cmd) - RTM_BASE) >> 2)
+
+/* 
+   Generic structure for encapsulation of optional route information.
+   It is reminiscent of sockaddr, but with sa_family replaced
+   with attribute type.
+ */
+
+struct rtattr {
+	unsigned short	rta_len;
+	unsigned short	rta_type;
+};
+
+/* Macros to handle rtattributes */
+
+#define RTA_ALIGNTO	4
+#define RTA_ALIGN(len) ( ((len)+RTA_ALIGNTO-1) & ~(RTA_ALIGNTO-1) )
+#define RTA_OK(rta,len) ((len) >= (int)sizeof(struct rtattr) && \
+			 (rta)->rta_len >= sizeof(struct rtattr) && \
+			 (rta)->rta_len <= (len))
+#define RTA_NEXT(rta,attrlen)	((attrlen) -= RTA_ALIGN((rta)->rta_len), \
+				 (struct rtattr*)(((char*)(rta)) + RTA_ALIGN((rta)->rta_len)))
+#define RTA_LENGTH(len)	(RTA_ALIGN(sizeof(struct rtattr)) + (len))
+#define RTA_SPACE(len)	RTA_ALIGN(RTA_LENGTH(len))
+#define RTA_DATA(rta)   ((void*)(((char*)(rta)) + RTA_LENGTH(0)))
+#define RTA_PAYLOAD(rta) ((int)((rta)->rta_len) - RTA_LENGTH(0))
+
+
+
+
+/******************************************************************************
+ *		Definitions used in routing table administration.
+ ****/
+
+struct rtmsg {
+	unsigned char		rtm_family;
+	unsigned char		rtm_dst_len;
+	unsigned char		rtm_src_len;
+	unsigned char		rtm_tos;
+
+	unsigned char		rtm_table;	/* Routing table id */
+	unsigned char		rtm_protocol;	/* Routing protocol; see below	*/
+	unsigned char		rtm_scope;	/* See below */	
+	unsigned char		rtm_type;	/* See below	*/
+
+	unsigned		rtm_flags;
+};
+
+/* rtm_type */
+
+enum {
+	RTN_UNSPEC,
+	RTN_UNICAST,		/* Gateway or direct route	*/
+	RTN_LOCAL,		/* Accept locally		*/
+	RTN_BROADCAST,		/* Accept locally as broadcast,
+				   send as broadcast */
+	RTN_ANYCAST,		/* Accept locally as broadcast,
+				   but send as unicast */
+	RTN_MULTICAST,		/* Multicast route		*/
+	RTN_BLACKHOLE,		/* Drop				*/
+	RTN_UNREACHABLE,	/* Destination is unreachable   */
+	RTN_PROHIBIT,		/* Administratively prohibited	*/
+	RTN_THROW,		/* Not in this table		*/
+	RTN_NAT,		/* Translate this address	*/
+	RTN_XRESOLVE,		/* Use external resolver	*/
+	__RTN_MAX
+};
+
+#define RTN_MAX (__RTN_MAX - 1)
+
+
+/* rtm_protocol */
+
+#define RTPROT_UNSPEC	0
+#define RTPROT_REDIRECT	1	/* Route installed by ICMP redirects;
+				   not used by current IPv4 */
+#define RTPROT_KERNEL	2	/* Route installed by kernel		*/
+#define RTPROT_BOOT	3	/* Route installed during boot		*/
+#define RTPROT_STATIC	4	/* Route installed by administrator	*/
+
+/* Values of protocol >= RTPROT_STATIC are not interpreted by kernel;
+   they are just passed from user and back as is.
+   It will be used by hypothetical multiple routing daemons.
+   Note that protocol values should be standardized in order to
+   avoid conflicts.
+ */
+
+#define RTPROT_GATED	8	/* Apparently, GateD */
+#define RTPROT_RA	9	/* RDISC/ND router advertisements */
+#define RTPROT_MRT	10	/* Merit MRT */
+#define RTPROT_ZEBRA	11	/* Zebra */
+#define RTPROT_BIRD	12	/* BIRD */
+#define RTPROT_DNROUTED	13	/* DECnet routing daemon */
+#define RTPROT_XORP	14	/* XORP */
+#define RTPROT_NTK	15	/* Netsukuku */
+#define RTPROT_DHCP	16      /* DHCP client */
+
+/* rtm_scope
+
+   Really it is not scope, but sort of distance to the destination.
+   NOWHERE are reserved for not existing destinations, HOST is our
+   local addresses, LINK are destinations, located on directly attached
+   link and UNIVERSE is everywhere in the Universe.
+
+   Intermediate values are also possible f.e. interior routes
+   could be assigned a value between UNIVERSE and LINK.
+*/
+
+enum rt_scope_t {
+	RT_SCOPE_UNIVERSE=0,
+/* User defined values  */
+	RT_SCOPE_SITE=200,
+	RT_SCOPE_LINK=253,
+	RT_SCOPE_HOST=254,
+	RT_SCOPE_NOWHERE=255
+};
+
+/* rtm_flags */
+
+#define RTM_F_NOTIFY		0x100	/* Notify user of route change	*/
+#define RTM_F_CLONED		0x200	/* This route is cloned		*/
+#define RTM_F_EQUALIZE		0x400	/* Multipath equalizer: NI	*/
+#define RTM_F_PREFIX		0x800	/* Prefix addresses		*/
+
+/* Reserved table identifiers */
+
+enum rt_class_t {
+	RT_TABLE_UNSPEC=0,
+/* User defined values */
+	RT_TABLE_COMPAT=252,
+	RT_TABLE_DEFAULT=253,
+	RT_TABLE_MAIN=254,
+	RT_TABLE_LOCAL=255,
+	RT_TABLE_MAX=0xFFFFFFFF
+};
+
+
+/* Routing message attributes */
+
+enum rtattr_type_t {
+	RTA_UNSPEC,
+	RTA_DST,
+	RTA_SRC,
+	RTA_IIF,
+	RTA_OIF,
+	RTA_GATEWAY,
+	RTA_PRIORITY,
+	RTA_PREFSRC,
+	RTA_METRICS,
+	RTA_MULTIPATH,
+	RTA_PROTOINFO, /* no longer used */
+	RTA_FLOW,
+	RTA_CACHEINFO,
+	RTA_SESSION, /* no longer used */
+	RTA_MP_ALGO, /* no longer used */
+	RTA_TABLE,
+	RTA_MARK,
+	__RTA_MAX
+};
+
+#define RTA_MAX (__RTA_MAX - 1)
+
+#define RTM_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct rtmsg))))
+#define RTM_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct rtmsg))
+
+/* RTM_MULTIPATH --- array of struct rtnexthop.
+ *
+ * "struct rtnexthop" describes all necessary nexthop information,
+ * i.e. parameters of path to a destination via this nexthop.
+ *
+ * At the moment it is impossible to set different prefsrc, mtu, window
+ * and rtt for different paths from multipath.
+ */
+
+struct rtnexthop {
+	unsigned short		rtnh_len;
+	unsigned char		rtnh_flags;
+	unsigned char		rtnh_hops;
+	int			rtnh_ifindex;
+};
+
+/* rtnh_flags */
+
+#define RTNH_F_DEAD		1	/* Nexthop is dead (used by multipath)	*/
+#define RTNH_F_PERVASIVE	2	/* Do recursive gateway lookup	*/
+#define RTNH_F_ONLINK		4	/* Gateway is forced on link	*/
+
+/* Macros to handle hexthops */
+
+#define RTNH_ALIGNTO	4
+#define RTNH_ALIGN(len) ( ((len)+RTNH_ALIGNTO-1) & ~(RTNH_ALIGNTO-1) )
+#define RTNH_OK(rtnh,len) ((rtnh)->rtnh_len >= sizeof(struct rtnexthop) && \
+			   ((int)(rtnh)->rtnh_len) <= (len))
+#define RTNH_NEXT(rtnh)	((struct rtnexthop*)(((char*)(rtnh)) + RTNH_ALIGN((rtnh)->rtnh_len)))
+#define RTNH_LENGTH(len) (RTNH_ALIGN(sizeof(struct rtnexthop)) + (len))
+#define RTNH_SPACE(len)	RTNH_ALIGN(RTNH_LENGTH(len))
+#define RTNH_DATA(rtnh)   ((struct rtattr*)(((char*)(rtnh)) + RTNH_LENGTH(0)))
+
+/* RTM_CACHEINFO */
+
+struct rta_cacheinfo {
+	__u32	rta_clntref;
+	__u32	rta_lastuse;
+	__s32	rta_expires;
+	__u32	rta_error;
+	__u32	rta_used;
+
+#define RTNETLINK_HAVE_PEERINFO 1
+	__u32	rta_id;
+	__u32	rta_ts;
+	__u32	rta_tsage;
+};
+
+/* RTM_METRICS --- array of struct rtattr with types of RTAX_* */
+
+enum {
+	RTAX_UNSPEC,
+#define RTAX_UNSPEC RTAX_UNSPEC
+	RTAX_LOCK,
+#define RTAX_LOCK RTAX_LOCK
+	RTAX_MTU,
+#define RTAX_MTU RTAX_MTU
+	RTAX_WINDOW,
+#define RTAX_WINDOW RTAX_WINDOW
+	RTAX_RTT,
+#define RTAX_RTT RTAX_RTT
+	RTAX_RTTVAR,
+#define RTAX_RTTVAR RTAX_RTTVAR
+	RTAX_SSTHRESH,
+#define RTAX_SSTHRESH RTAX_SSTHRESH
+	RTAX_CWND,
+#define RTAX_CWND RTAX_CWND
+	RTAX_ADVMSS,
+#define RTAX_ADVMSS RTAX_ADVMSS
+	RTAX_REORDERING,
+#define RTAX_REORDERING RTAX_REORDERING
+	RTAX_HOPLIMIT,
+#define RTAX_HOPLIMIT RTAX_HOPLIMIT
+	RTAX_INITCWND,
+#define RTAX_INITCWND RTAX_INITCWND
+	RTAX_FEATURES,
+#define RTAX_FEATURES RTAX_FEATURES
+	RTAX_RTO_MIN,
+#define RTAX_RTO_MIN RTAX_RTO_MIN
+	RTAX_INITRWND,
+#define RTAX_INITRWND RTAX_INITRWND
+	__RTAX_MAX
+};
+
+#define RTAX_MAX (__RTAX_MAX - 1)
+
+#define RTAX_FEATURE_ECN	0x00000001
+#define RTAX_FEATURE_SACK	0x00000002
+#define RTAX_FEATURE_TIMESTAMP	0x00000004
+#define RTAX_FEATURE_ALLFRAG	0x00000008
+
+struct rta_session {
+	__u8	proto;
+	__u8	pad1;
+	__u16	pad2;
+
+	union {
+		struct {
+			__u16	sport;
+			__u16	dport;
+		} ports;
+
+		struct {
+			__u8	type;
+			__u8	code;
+			__u16	ident;
+		} icmpt;
+
+		__u32		spi;
+	} u;
+};
+
+/****
+ *		General form of address family dependent message.
+ ****/
+
+struct rtgenmsg {
+	unsigned char		rtgen_family;
+};
+
+/*****************************************************************
+ *		Link layer specific messages.
+ ****/
+
+/* struct ifinfomsg
+ * passes link level specific information, not dependent
+ * on network protocol.
+ */
+
+struct ifinfomsg {
+	unsigned char	ifi_family;
+	unsigned char	__ifi_pad;
+	unsigned short	ifi_type;		/* ARPHRD_* */
+	int		ifi_index;		/* Link index	*/
+	unsigned	ifi_flags;		/* IFF_* flags	*/
+	unsigned	ifi_change;		/* IFF_* change mask */
+};
+
+/********************************************************************
+ *		prefix information 
+ ****/
+
+struct prefixmsg {
+	unsigned char	prefix_family;
+	unsigned char	prefix_pad1;
+	unsigned short	prefix_pad2;
+	int		prefix_ifindex;
+	unsigned char	prefix_type;
+	unsigned char	prefix_len;
+	unsigned char	prefix_flags;
+	unsigned char	prefix_pad3;
+};
+
+enum 
+{
+	PREFIX_UNSPEC,
+	PREFIX_ADDRESS,
+	PREFIX_CACHEINFO,
+	__PREFIX_MAX
+};
+
+#define PREFIX_MAX	(__PREFIX_MAX - 1)
+
+struct prefix_cacheinfo {
+	__u32	preferred_time;
+	__u32	valid_time;
+};
+
+
+/*****************************************************************
+ *		Traffic control messages.
+ ****/
+
+struct tcmsg {
+	unsigned char	tcm_family;
+	unsigned char	tcm__pad1;
+	unsigned short	tcm__pad2;
+	int		tcm_ifindex;
+	__u32		tcm_handle;
+	__u32		tcm_parent;
+	__u32		tcm_info;
+};
+
+enum {
+	TCA_UNSPEC,
+	TCA_KIND,
+	TCA_OPTIONS,
+	TCA_STATS,
+	TCA_XSTATS,
+	TCA_RATE,
+	TCA_FCNT,
+	TCA_STATS2,
+	TCA_STAB,
+	__TCA_MAX
+};
+
+#define TCA_MAX (__TCA_MAX - 1)
+
+#define TCA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcmsg))))
+#define TCA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcmsg))
+
+/********************************************************************
+ *		Neighbor Discovery userland options
+ ****/
+
+struct nduseroptmsg {
+	unsigned char	nduseropt_family;
+	unsigned char	nduseropt_pad1;
+	unsigned short	nduseropt_opts_len;	/* Total length of options */
+	int		nduseropt_ifindex;
+	__u8		nduseropt_icmp_type;
+	__u8		nduseropt_icmp_code;
+	unsigned short	nduseropt_pad2;
+	unsigned int	nduseropt_pad3;
+	/* Followed by one or more ND options */
+};
+
+enum {
+	NDUSEROPT_UNSPEC,
+	NDUSEROPT_SRCADDR,
+	__NDUSEROPT_MAX
+};
+
+#define NDUSEROPT_MAX	(__NDUSEROPT_MAX - 1)
+
+#ifndef __KERNEL__
+/* RTnetlink multicast groups - backwards compatibility for userspace */
+#define RTMGRP_LINK		1
+#define RTMGRP_NOTIFY		2
+#define RTMGRP_NEIGH		4
+#define RTMGRP_TC		8
+
+#define RTMGRP_IPV4_IFADDR	0x10
+#define RTMGRP_IPV4_MROUTE	0x20
+#define RTMGRP_IPV4_ROUTE	0x40
+#define RTMGRP_IPV4_RULE	0x80
+
+#define RTMGRP_IPV6_IFADDR	0x100
+#define RTMGRP_IPV6_MROUTE	0x200
+#define RTMGRP_IPV6_ROUTE	0x400
+#define RTMGRP_IPV6_IFINFO	0x800
+
+#define RTMGRP_DECnet_IFADDR    0x1000
+#define RTMGRP_DECnet_ROUTE     0x4000
+
+#define RTMGRP_IPV6_PREFIX	0x20000
+#endif
+
+/* RTnetlink multicast groups */
+enum rtnetlink_groups {
+	RTNLGRP_NONE,
+#define RTNLGRP_NONE		RTNLGRP_NONE
+	RTNLGRP_LINK,
+#define RTNLGRP_LINK		RTNLGRP_LINK
+	RTNLGRP_NOTIFY,
+#define RTNLGRP_NOTIFY		RTNLGRP_NOTIFY
+	RTNLGRP_NEIGH,
+#define RTNLGRP_NEIGH		RTNLGRP_NEIGH
+	RTNLGRP_TC,
+#define RTNLGRP_TC		RTNLGRP_TC
+	RTNLGRP_IPV4_IFADDR,
+#define RTNLGRP_IPV4_IFADDR	RTNLGRP_IPV4_IFADDR
+	RTNLGRP_IPV4_MROUTE,
+#define	RTNLGRP_IPV4_MROUTE	RTNLGRP_IPV4_MROUTE
+	RTNLGRP_IPV4_ROUTE,
+#define RTNLGRP_IPV4_ROUTE	RTNLGRP_IPV4_ROUTE
+	RTNLGRP_IPV4_RULE,
+#define RTNLGRP_IPV4_RULE	RTNLGRP_IPV4_RULE
+	RTNLGRP_IPV6_IFADDR,
+#define RTNLGRP_IPV6_IFADDR	RTNLGRP_IPV6_IFADDR
+	RTNLGRP_IPV6_MROUTE,
+#define RTNLGRP_IPV6_MROUTE	RTNLGRP_IPV6_MROUTE
+	RTNLGRP_IPV6_ROUTE,
+#define RTNLGRP_IPV6_ROUTE	RTNLGRP_IPV6_ROUTE
+	RTNLGRP_IPV6_IFINFO,
+#define RTNLGRP_IPV6_IFINFO	RTNLGRP_IPV6_IFINFO
+	RTNLGRP_DECnet_IFADDR,
+#define RTNLGRP_DECnet_IFADDR	RTNLGRP_DECnet_IFADDR
+	RTNLGRP_NOP2,
+	RTNLGRP_DECnet_ROUTE,
+#define RTNLGRP_DECnet_ROUTE	RTNLGRP_DECnet_ROUTE
+	RTNLGRP_DECnet_RULE,
+#define RTNLGRP_DECnet_RULE	RTNLGRP_DECnet_RULE
+	RTNLGRP_NOP4,
+	RTNLGRP_IPV6_PREFIX,
+#define RTNLGRP_IPV6_PREFIX	RTNLGRP_IPV6_PREFIX
+	RTNLGRP_IPV6_RULE,
+#define RTNLGRP_IPV6_RULE	RTNLGRP_IPV6_RULE
+	RTNLGRP_ND_USEROPT,
+#define RTNLGRP_ND_USEROPT	RTNLGRP_ND_USEROPT
+	RTNLGRP_PHONET_IFADDR,
+#define RTNLGRP_PHONET_IFADDR	RTNLGRP_PHONET_IFADDR
+	RTNLGRP_PHONET_ROUTE,
+#define RTNLGRP_PHONET_ROUTE	RTNLGRP_PHONET_ROUTE
+	RTNLGRP_DCB,
+#define RTNLGRP_DCB		RTNLGRP_DCB
+	__RTNLGRP_MAX
+};
+#define RTNLGRP_MAX	(__RTNLGRP_MAX - 1)
+
+/* TC action piece */
+struct tcamsg {
+	unsigned char	tca_family;
+	unsigned char	tca__pad1;
+	unsigned short	tca__pad2;
+};
+#define TA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcamsg))))
+#define TA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcamsg))
+#define TCA_ACT_TAB 1 /* attr type must be >=1 */	
+#define TCAA_MAX 1
+
+/* New extended info filters for IFLA_EXT_MASK */
+#define RTEXT_FILTER_VF		(1 << 0)
+
+/* End of information exported to user level */
+
+#ifdef __KERNEL__
+
+#include <linux/mutex.h>
+#include <linux/netdevice.h>
+
+static __inline__ int rtattr_strcmp(const struct rtattr *rta, const char *str)
+{
+	int len = strlen(str) + 1;
+	return len > rta->rta_len || memcmp(RTA_DATA(rta), str, len);
+}
+
+extern int rtnetlink_send(struct sk_buff *skb, struct net *net, u32 pid, u32 group, int echo);
+extern int rtnl_unicast(struct sk_buff *skb, struct net *net, u32 pid);
+extern void rtnl_notify(struct sk_buff *skb, struct net *net, u32 pid,
+			u32 group, struct nlmsghdr *nlh, gfp_t flags);
+extern void rtnl_set_sk_err(struct net *net, u32 group, int error);
+extern int rtnetlink_put_metrics(struct sk_buff *skb, u32 *metrics);
+extern int rtnl_put_cacheinfo(struct sk_buff *skb, struct dst_entry *dst,
+			      u32 id, u32 ts, u32 tsage, long expires,
+			      u32 error);
+
+extern void __rta_fill(struct sk_buff *skb, int attrtype, int attrlen, const void *data);
+
+#define RTA_PUT(skb, attrtype, attrlen, data) \
+({	if (unlikely(skb_tailroom(skb) < (int)RTA_SPACE(attrlen))) \
+		 goto rtattr_failure; \
+   	__rta_fill(skb, attrtype, attrlen, data); }) 
+
+#define RTA_APPEND(skb, attrlen, data) \
+({	if (unlikely(skb_tailroom(skb) < (int)(attrlen))) \
+		goto rtattr_failure; \
+	memcpy(skb_put(skb, attrlen), data, attrlen); })
+
+#define RTA_PUT_NOHDR(skb, attrlen, data) \
+({	RTA_APPEND(skb, RTA_ALIGN(attrlen), data); \
+	memset(skb_tail_pointer(skb) - (RTA_ALIGN(attrlen) - attrlen), 0, \
+	       RTA_ALIGN(attrlen) - attrlen); })
+
+#define RTA_PUT_U8(skb, attrtype, value) \
+({	u8 _tmp = (value); \
+	RTA_PUT(skb, attrtype, sizeof(u8), &_tmp); })
+
+#define RTA_PUT_U16(skb, attrtype, value) \
+({	u16 _tmp = (value); \
+	RTA_PUT(skb, attrtype, sizeof(u16), &_tmp); })
+
+#define RTA_PUT_U32(skb, attrtype, value) \
+({	u32 _tmp = (value); \
+	RTA_PUT(skb, attrtype, sizeof(u32), &_tmp); })
+
+#define RTA_PUT_U64(skb, attrtype, value) \
+({	u64 _tmp = (value); \
+	RTA_PUT(skb, attrtype, sizeof(u64), &_tmp); })
+
+#define RTA_PUT_SECS(skb, attrtype, value) \
+	RTA_PUT_U64(skb, attrtype, (value) / HZ)
+
+#define RTA_PUT_MSECS(skb, attrtype, value) \
+	RTA_PUT_U64(skb, attrtype, jiffies_to_msecs(value))
+
+#define RTA_PUT_STRING(skb, attrtype, value) \
+	RTA_PUT(skb, attrtype, strlen(value) + 1, value)
+
+#define RTA_PUT_FLAG(skb, attrtype) \
+	RTA_PUT(skb, attrtype, 0, NULL);
+
+#define RTA_NEST(skb, type) \
+({	struct rtattr *__start = (struct rtattr *)skb_tail_pointer(skb); \
+	RTA_PUT(skb, type, 0, NULL); \
+	__start;  })
+
+#define RTA_NEST_END(skb, start) \
+({	(start)->rta_len = skb_tail_pointer(skb) - (unsigned char *)(start); \
+	(skb)->len; })
+
+#define RTA_NEST_COMPAT(skb, type, attrlen, data) \
+({	struct rtattr *__start = (struct rtattr *)skb_tail_pointer(skb); \
+	RTA_PUT(skb, type, attrlen, data); \
+	RTA_NEST(skb, type); \
+	__start; })
+
+#define RTA_NEST_COMPAT_END(skb, start) \
+({	struct rtattr *__nest = (void *)(start) + NLMSG_ALIGN((start)->rta_len); \
+	(start)->rta_len = skb_tail_pointer(skb) - (unsigned char *)(start); \
+	RTA_NEST_END(skb, __nest); \
+	(skb)->len; })
+
+#define RTA_NEST_CANCEL(skb, start) \
+({	if (start) \
+		skb_trim(skb, (unsigned char *) (start) - (skb)->data); \
+	-1; })
+
+#define RTA_GET_U8(rta) \
+({	if (!rta || RTA_PAYLOAD(rta) < sizeof(u8)) \
+		goto rtattr_failure; \
+	*(u8 *) RTA_DATA(rta); })
+
+#define RTA_GET_U16(rta) \
+({	if (!rta || RTA_PAYLOAD(rta) < sizeof(u16)) \
+		goto rtattr_failure; \
+	*(u16 *) RTA_DATA(rta); })
+
+#define RTA_GET_U32(rta) \
+({	if (!rta || RTA_PAYLOAD(rta) < sizeof(u32)) \
+		goto rtattr_failure; \
+	*(u32 *) RTA_DATA(rta); })
+
+#define RTA_GET_U64(rta) \
+({	u64 _tmp; \
+	if (!rta || RTA_PAYLOAD(rta) < sizeof(u64)) \
+		goto rtattr_failure; \
+	memcpy(&_tmp, RTA_DATA(rta), sizeof(_tmp)); \
+	_tmp; })
+
+#define RTA_GET_FLAG(rta) (!!(rta))
+
+#define RTA_GET_SECS(rta) ((unsigned long) RTA_GET_U64(rta) * HZ)
+#define RTA_GET_MSECS(rta) (msecs_to_jiffies((unsigned long) RTA_GET_U64(rta)))
+		
+static inline struct rtattr *
+__rta_reserve(struct sk_buff *skb, int attrtype, int attrlen)
+{
+	struct rtattr *rta;
+	int size = RTA_LENGTH(attrlen);
+
+	rta = (struct rtattr*)skb_put(skb, RTA_ALIGN(size));
+	rta->rta_type = attrtype;
+	rta->rta_len = size;
+	memset(RTA_DATA(rta) + attrlen, 0, RTA_ALIGN(size) - size);
+	return rta;
+}
+
+#define __RTA_PUT(skb, attrtype, attrlen) \
+({ 	if (unlikely(skb_tailroom(skb) < (int)RTA_SPACE(attrlen))) \
+		goto rtattr_failure; \
+   	__rta_reserve(skb, attrtype, attrlen); })
+
+extern void rtmsg_ifinfo(int type, struct net_device *dev, unsigned change);
+
+/* RTNL is used as a global lock for all changes to network configuration  */
+extern void rtnl_lock(void);
+extern void rtnl_unlock(void);
+extern int rtnl_trylock(void);
+extern int rtnl_is_locked(void);
+#ifdef CONFIG_PROVE_LOCKING
+extern int lockdep_rtnl_is_held(void);
+#endif /* #ifdef CONFIG_PROVE_LOCKING */
+
+/**
+ * rcu_dereference_rtnl - rcu_dereference with debug checking
+ * @p: The pointer to read, prior to dereferencing
+ *
+ * Do an rcu_dereference(p), but check caller either holds rcu_read_lock()
+ * or RTNL. Note : Please prefer rtnl_dereference() or rcu_dereference()
+ */
+#define rcu_dereference_rtnl(p)					\
+	rcu_dereference_check(p, lockdep_rtnl_is_held())
+
+/**
+ * rtnl_dereference - fetch RCU pointer when updates are prevented by RTNL
+ * @p: The pointer to read, prior to dereferencing
+ *
+ * Return the value of the specified RCU-protected pointer, but omit
+ * both the smp_read_barrier_depends() and the ACCESS_ONCE(), because
+ * caller holds RTNL.
+ */
+#define rtnl_dereference(p)					\
+	rcu_dereference_protected(p, lockdep_rtnl_is_held())
+
+static inline struct netdev_queue *dev_ingress_queue(struct net_device *dev)
+{
+	return rtnl_dereference(dev->ingress_queue);
+}
+
+extern struct netdev_queue *dev_ingress_queue_create(struct net_device *dev);
+
+extern void rtnetlink_init(void);
+extern void __rtnl_unlock(void);
+
+#define ASSERT_RTNL() do { \
+	if (unlikely(!rtnl_is_locked())) { \
+		printk(KERN_ERR "RTNL: assertion failed at %s (%d)\n", \
+		       __FILE__,  __LINE__); \
+		dump_stack(); \
+	} \
+} while(0)
+
+static inline u32 rtm_get_table(struct rtattr **rta, u8 table)
+{
+	return RTA_GET_U32(rta[RTA_TABLE-1]);
+rtattr_failure:
+	return table;
+}
+
+#endif /* __KERNEL__ */
+
+
+#endif	/* __LINUX_RTNETLINK_H */
diff --git a/include/linux/rwlock.h b/include/linux/rwlock.h
new file mode 100644
index 00000000..bc2994ed
--- /dev/null
+++ b/include/linux/rwlock.h
@@ -0,0 +1,125 @@
+#ifndef __LINUX_RWLOCK_H
+#define __LINUX_RWLOCK_H
+
+#ifndef __LINUX_SPINLOCK_H
+# error "please don't include this file directly"
+#endif
+
+/*
+ * rwlock related methods
+ *
+ * split out from spinlock.h
+ *
+ * portions Copyright 2005, Red Hat, Inc., Ingo Molnar
+ * Released under the General Public License (GPL).
+ */
+
+#ifdef CONFIG_DEBUG_SPINLOCK
+  extern void __rwlock_init(rwlock_t *lock, const char *name,
+			    struct lock_class_key *key);
+# define rwlock_init(lock)					\
+do {								\
+	static struct lock_class_key __key;			\
+								\
+	__rwlock_init((lock), #lock, &__key);			\
+} while (0)
+#else
+# define rwlock_init(lock)					\
+	do { *(lock) = __RW_LOCK_UNLOCKED(lock); } while (0)
+#endif
+
+#ifdef CONFIG_DEBUG_SPINLOCK
+ extern void do_raw_read_lock(rwlock_t *lock) __acquires(lock);
+#define do_raw_read_lock_flags(lock, flags) do_raw_read_lock(lock)
+ extern int do_raw_read_trylock(rwlock_t *lock);
+ extern void do_raw_read_unlock(rwlock_t *lock) __releases(lock);
+ extern void do_raw_write_lock(rwlock_t *lock) __acquires(lock);
+#define do_raw_write_lock_flags(lock, flags) do_raw_write_lock(lock)
+ extern int do_raw_write_trylock(rwlock_t *lock);
+ extern void do_raw_write_unlock(rwlock_t *lock) __releases(lock);
+#else
+# define do_raw_read_lock(rwlock)	do {__acquire(lock); arch_read_lock(&(rwlock)->raw_lock); } while (0)
+# define do_raw_read_lock_flags(lock, flags) \
+		do {__acquire(lock); arch_read_lock_flags(&(lock)->raw_lock, *(flags)); } while (0)
+# define do_raw_read_trylock(rwlock)	arch_read_trylock(&(rwlock)->raw_lock)
+# define do_raw_read_unlock(rwlock)	do {arch_read_unlock(&(rwlock)->raw_lock); __release(lock); } while (0)
+# define do_raw_write_lock(rwlock)	do {__acquire(lock); arch_write_lock(&(rwlock)->raw_lock); } while (0)
+# define do_raw_write_lock_flags(lock, flags) \
+		do {__acquire(lock); arch_write_lock_flags(&(lock)->raw_lock, *(flags)); } while (0)
+# define do_raw_write_trylock(rwlock)	arch_write_trylock(&(rwlock)->raw_lock)
+# define do_raw_write_unlock(rwlock)	do {arch_write_unlock(&(rwlock)->raw_lock); __release(lock); } while (0)
+#endif
+
+#define read_can_lock(rwlock)		arch_read_can_lock(&(rwlock)->raw_lock)
+#define write_can_lock(rwlock)		arch_write_can_lock(&(rwlock)->raw_lock)
+
+/*
+ * Define the various rw_lock methods.  Note we define these
+ * regardless of whether CONFIG_SMP or CONFIG_PREEMPT are set. The various
+ * methods are defined as nops in the case they are not required.
+ */
+#define read_trylock(lock)	__cond_lock(lock, _raw_read_trylock(lock))
+#define write_trylock(lock)	__cond_lock(lock, _raw_write_trylock(lock))
+
+#define write_lock(lock)	_raw_write_lock(lock)
+#define read_lock(lock)		_raw_read_lock(lock)
+
+#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
+
+#define read_lock_irqsave(lock, flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		flags = _raw_read_lock_irqsave(lock);	\
+	} while (0)
+#define write_lock_irqsave(lock, flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		flags = _raw_write_lock_irqsave(lock);	\
+	} while (0)
+
+#else
+
+#define read_lock_irqsave(lock, flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		_raw_read_lock_irqsave(lock, flags);	\
+	} while (0)
+#define write_lock_irqsave(lock, flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		_raw_write_lock_irqsave(lock, flags);	\
+	} while (0)
+
+#endif
+
+#define read_lock_irq(lock)		_raw_read_lock_irq(lock)
+#define read_lock_bh(lock)		_raw_read_lock_bh(lock)
+#define write_lock_irq(lock)		_raw_write_lock_irq(lock)
+#define write_lock_bh(lock)		_raw_write_lock_bh(lock)
+#define read_unlock(lock)		_raw_read_unlock(lock)
+#define write_unlock(lock)		_raw_write_unlock(lock)
+#define read_unlock_irq(lock)		_raw_read_unlock_irq(lock)
+#define write_unlock_irq(lock)		_raw_write_unlock_irq(lock)
+
+#define read_unlock_irqrestore(lock, flags)			\
+	do {							\
+		typecheck(unsigned long, flags);		\
+		_raw_read_unlock_irqrestore(lock, flags);	\
+	} while (0)
+#define read_unlock_bh(lock)		_raw_read_unlock_bh(lock)
+
+#define write_unlock_irqrestore(lock, flags)		\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		_raw_write_unlock_irqrestore(lock, flags);	\
+	} while (0)
+#define write_unlock_bh(lock)		_raw_write_unlock_bh(lock)
+
+#define write_trylock_irqsave(lock, flags) \
+({ \
+	local_irq_save(flags); \
+	write_trylock(lock) ? \
+	1 : ({ local_irq_restore(flags); 0; }); \
+})
+
+#endif /* __LINUX_RWLOCK_H */
diff --git a/include/linux/rwlock_api_smp.h b/include/linux/rwlock_api_smp.h
new file mode 100644
index 00000000..9c9f0495
--- /dev/null
+++ b/include/linux/rwlock_api_smp.h
@@ -0,0 +1,282 @@
+#ifndef __LINUX_RWLOCK_API_SMP_H
+#define __LINUX_RWLOCK_API_SMP_H
+
+#ifndef __LINUX_SPINLOCK_API_SMP_H
+# error "please don't include this file directly"
+#endif
+
+/*
+ * include/linux/rwlock_api_smp.h
+ *
+ * spinlock API declarations on SMP (and debug)
+ * (implemented in kernel/spinlock.c)
+ *
+ * portions Copyright 2005, Red Hat, Inc., Ingo Molnar
+ * Released under the General Public License (GPL).
+ */
+
+void __lockfunc _raw_read_lock(rwlock_t *lock)		__acquires(lock);
+void __lockfunc _raw_write_lock(rwlock_t *lock)		__acquires(lock);
+void __lockfunc _raw_read_lock_bh(rwlock_t *lock)	__acquires(lock);
+void __lockfunc _raw_write_lock_bh(rwlock_t *lock)	__acquires(lock);
+void __lockfunc _raw_read_lock_irq(rwlock_t *lock)	__acquires(lock);
+void __lockfunc _raw_write_lock_irq(rwlock_t *lock)	__acquires(lock);
+unsigned long __lockfunc _raw_read_lock_irqsave(rwlock_t *lock)
+							__acquires(lock);
+unsigned long __lockfunc _raw_write_lock_irqsave(rwlock_t *lock)
+							__acquires(lock);
+int __lockfunc _raw_read_trylock(rwlock_t *lock);
+int __lockfunc _raw_write_trylock(rwlock_t *lock);
+void __lockfunc _raw_read_unlock(rwlock_t *lock)	__releases(lock);
+void __lockfunc _raw_write_unlock(rwlock_t *lock)	__releases(lock);
+void __lockfunc _raw_read_unlock_bh(rwlock_t *lock)	__releases(lock);
+void __lockfunc _raw_write_unlock_bh(rwlock_t *lock)	__releases(lock);
+void __lockfunc _raw_read_unlock_irq(rwlock_t *lock)	__releases(lock);
+void __lockfunc _raw_write_unlock_irq(rwlock_t *lock)	__releases(lock);
+void __lockfunc
+_raw_read_unlock_irqrestore(rwlock_t *lock, unsigned long flags)
+							__releases(lock);
+void __lockfunc
+_raw_write_unlock_irqrestore(rwlock_t *lock, unsigned long flags)
+							__releases(lock);
+
+#ifdef CONFIG_INLINE_READ_LOCK
+#define _raw_read_lock(lock) __raw_read_lock(lock)
+#endif
+
+#ifdef CONFIG_INLINE_WRITE_LOCK
+#define _raw_write_lock(lock) __raw_write_lock(lock)
+#endif
+
+#ifdef CONFIG_INLINE_READ_LOCK_BH
+#define _raw_read_lock_bh(lock) __raw_read_lock_bh(lock)
+#endif
+
+#ifdef CONFIG_INLINE_WRITE_LOCK_BH
+#define _raw_write_lock_bh(lock) __raw_write_lock_bh(lock)
+#endif
+
+#ifdef CONFIG_INLINE_READ_LOCK_IRQ
+#define _raw_read_lock_irq(lock) __raw_read_lock_irq(lock)
+#endif
+
+#ifdef CONFIG_INLINE_WRITE_LOCK_IRQ
+#define _raw_write_lock_irq(lock) __raw_write_lock_irq(lock)
+#endif
+
+#ifdef CONFIG_INLINE_READ_LOCK_IRQSAVE
+#define _raw_read_lock_irqsave(lock) __raw_read_lock_irqsave(lock)
+#endif
+
+#ifdef CONFIG_INLINE_WRITE_LOCK_IRQSAVE
+#define _raw_write_lock_irqsave(lock) __raw_write_lock_irqsave(lock)
+#endif
+
+#ifdef CONFIG_INLINE_READ_TRYLOCK
+#define _raw_read_trylock(lock) __raw_read_trylock(lock)
+#endif
+
+#ifdef CONFIG_INLINE_WRITE_TRYLOCK
+#define _raw_write_trylock(lock) __raw_write_trylock(lock)
+#endif
+
+#ifdef CONFIG_INLINE_READ_UNLOCK
+#define _raw_read_unlock(lock) __raw_read_unlock(lock)
+#endif
+
+#ifdef CONFIG_INLINE_WRITE_UNLOCK
+#define _raw_write_unlock(lock) __raw_write_unlock(lock)
+#endif
+
+#ifdef CONFIG_INLINE_READ_UNLOCK_BH
+#define _raw_read_unlock_bh(lock) __raw_read_unlock_bh(lock)
+#endif
+
+#ifdef CONFIG_INLINE_WRITE_UNLOCK_BH
+#define _raw_write_unlock_bh(lock) __raw_write_unlock_bh(lock)
+#endif
+
+#ifdef CONFIG_INLINE_READ_UNLOCK_IRQ
+#define _raw_read_unlock_irq(lock) __raw_read_unlock_irq(lock)
+#endif
+
+#ifdef CONFIG_INLINE_WRITE_UNLOCK_IRQ
+#define _raw_write_unlock_irq(lock) __raw_write_unlock_irq(lock)
+#endif
+
+#ifdef CONFIG_INLINE_READ_UNLOCK_IRQRESTORE
+#define _raw_read_unlock_irqrestore(lock, flags) \
+	__raw_read_unlock_irqrestore(lock, flags)
+#endif
+
+#ifdef CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE
+#define _raw_write_unlock_irqrestore(lock, flags) \
+	__raw_write_unlock_irqrestore(lock, flags)
+#endif
+
+static inline int __raw_read_trylock(rwlock_t *lock)
+{
+	preempt_disable();
+	if (do_raw_read_trylock(lock)) {
+		rwlock_acquire_read(&lock->dep_map, 0, 1, _RET_IP_);
+		return 1;
+	}
+	preempt_enable();
+	return 0;
+}
+
+static inline int __raw_write_trylock(rwlock_t *lock)
+{
+	preempt_disable();
+	if (do_raw_write_trylock(lock)) {
+		rwlock_acquire(&lock->dep_map, 0, 1, _RET_IP_);
+		return 1;
+	}
+	preempt_enable();
+	return 0;
+}
+
+/*
+ * If lockdep is enabled then we use the non-preemption spin-ops
+ * even on CONFIG_PREEMPT, because lockdep assumes that interrupts are
+ * not re-enabled during lock-acquire (which the preempt-spin-ops do):
+ */
+#if !defined(CONFIG_GENERIC_LOCKBREAK) || defined(CONFIG_DEBUG_LOCK_ALLOC)
+
+static inline void __raw_read_lock(rwlock_t *lock)
+{
+	preempt_disable();
+	rwlock_acquire_read(&lock->dep_map, 0, 0, _RET_IP_);
+	LOCK_CONTENDED(lock, do_raw_read_trylock, do_raw_read_lock);
+}
+
+static inline unsigned long __raw_read_lock_irqsave(rwlock_t *lock)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	preempt_disable();
+	rwlock_acquire_read(&lock->dep_map, 0, 0, _RET_IP_);
+	LOCK_CONTENDED_FLAGS(lock, do_raw_read_trylock, do_raw_read_lock,
+			     do_raw_read_lock_flags, &flags);
+	return flags;
+}
+
+static inline void __raw_read_lock_irq(rwlock_t *lock)
+{
+	local_irq_disable();
+	preempt_disable();
+	rwlock_acquire_read(&lock->dep_map, 0, 0, _RET_IP_);
+	LOCK_CONTENDED(lock, do_raw_read_trylock, do_raw_read_lock);
+}
+
+static inline void __raw_read_lock_bh(rwlock_t *lock)
+{
+	local_bh_disable();
+	preempt_disable();
+	rwlock_acquire_read(&lock->dep_map, 0, 0, _RET_IP_);
+	LOCK_CONTENDED(lock, do_raw_read_trylock, do_raw_read_lock);
+}
+
+static inline unsigned long __raw_write_lock_irqsave(rwlock_t *lock)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	preempt_disable();
+	rwlock_acquire(&lock->dep_map, 0, 0, _RET_IP_);
+	LOCK_CONTENDED_FLAGS(lock, do_raw_write_trylock, do_raw_write_lock,
+			     do_raw_write_lock_flags, &flags);
+	return flags;
+}
+
+static inline void __raw_write_lock_irq(rwlock_t *lock)
+{
+	local_irq_disable();
+	preempt_disable();
+	rwlock_acquire(&lock->dep_map, 0, 0, _RET_IP_);
+	LOCK_CONTENDED(lock, do_raw_write_trylock, do_raw_write_lock);
+}
+
+static inline void __raw_write_lock_bh(rwlock_t *lock)
+{
+	local_bh_disable();
+	preempt_disable();
+	rwlock_acquire(&lock->dep_map, 0, 0, _RET_IP_);
+	LOCK_CONTENDED(lock, do_raw_write_trylock, do_raw_write_lock);
+}
+
+static inline void __raw_write_lock(rwlock_t *lock)
+{
+	preempt_disable();
+	rwlock_acquire(&lock->dep_map, 0, 0, _RET_IP_);
+	LOCK_CONTENDED(lock, do_raw_write_trylock, do_raw_write_lock);
+}
+
+#endif /* CONFIG_PREEMPT */
+
+static inline void __raw_write_unlock(rwlock_t *lock)
+{
+	rwlock_release(&lock->dep_map, 1, _RET_IP_);
+	do_raw_write_unlock(lock);
+	preempt_enable();
+}
+
+static inline void __raw_read_unlock(rwlock_t *lock)
+{
+	rwlock_release(&lock->dep_map, 1, _RET_IP_);
+	do_raw_read_unlock(lock);
+	preempt_enable();
+}
+
+static inline void
+__raw_read_unlock_irqrestore(rwlock_t *lock, unsigned long flags)
+{
+	rwlock_release(&lock->dep_map, 1, _RET_IP_);
+	do_raw_read_unlock(lock);
+	local_irq_restore(flags);
+	preempt_enable();
+}
+
+static inline void __raw_read_unlock_irq(rwlock_t *lock)
+{
+	rwlock_release(&lock->dep_map, 1, _RET_IP_);
+	do_raw_read_unlock(lock);
+	local_irq_enable();
+	preempt_enable();
+}
+
+static inline void __raw_read_unlock_bh(rwlock_t *lock)
+{
+	rwlock_release(&lock->dep_map, 1, _RET_IP_);
+	do_raw_read_unlock(lock);
+	preempt_enable_no_resched();
+	local_bh_enable_ip((unsigned long)__builtin_return_address(0));
+}
+
+static inline void __raw_write_unlock_irqrestore(rwlock_t *lock,
+					     unsigned long flags)
+{
+	rwlock_release(&lock->dep_map, 1, _RET_IP_);
+	do_raw_write_unlock(lock);
+	local_irq_restore(flags);
+	preempt_enable();
+}
+
+static inline void __raw_write_unlock_irq(rwlock_t *lock)
+{
+	rwlock_release(&lock->dep_map, 1, _RET_IP_);
+	do_raw_write_unlock(lock);
+	local_irq_enable();
+	preempt_enable();
+}
+
+static inline void __raw_write_unlock_bh(rwlock_t *lock)
+{
+	rwlock_release(&lock->dep_map, 1, _RET_IP_);
+	do_raw_write_unlock(lock);
+	preempt_enable_no_resched();
+	local_bh_enable_ip((unsigned long)__builtin_return_address(0));
+}
+
+#endif /* __LINUX_RWLOCK_API_SMP_H */
diff --git a/include/linux/rwlock_types.h b/include/linux/rwlock_types.h
new file mode 100644
index 00000000..cc0072e9
--- /dev/null
+++ b/include/linux/rwlock_types.h
@@ -0,0 +1,48 @@
+#ifndef __LINUX_RWLOCK_TYPES_H
+#define __LINUX_RWLOCK_TYPES_H
+
+/*
+ * include/linux/rwlock_types.h - generic rwlock type definitions
+ *				  and initializers
+ *
+ * portions Copyright 2005, Red Hat, Inc., Ingo Molnar
+ * Released under the General Public License (GPL).
+ */
+typedef struct {
+	arch_rwlock_t raw_lock;
+#ifdef CONFIG_GENERIC_LOCKBREAK
+	unsigned int break_lock;
+#endif
+#ifdef CONFIG_DEBUG_SPINLOCK
+	unsigned int magic, owner_cpu;
+	void *owner;
+#endif
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	struct lockdep_map dep_map;
+#endif
+} rwlock_t;
+
+#define RWLOCK_MAGIC		0xdeaf1eed
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# define RW_DEP_MAP_INIT(lockname)	.dep_map = { .name = #lockname }
+#else
+# define RW_DEP_MAP_INIT(lockname)
+#endif
+
+#ifdef CONFIG_DEBUG_SPINLOCK
+#define __RW_LOCK_UNLOCKED(lockname)					\
+	(rwlock_t)	{	.raw_lock = __ARCH_RW_LOCK_UNLOCKED,	\
+				.magic = RWLOCK_MAGIC,			\
+				.owner = SPINLOCK_OWNER_INIT,		\
+				.owner_cpu = -1,			\
+				RW_DEP_MAP_INIT(lockname) }
+#else
+#define __RW_LOCK_UNLOCKED(lockname) \
+	(rwlock_t)	{	.raw_lock = __ARCH_RW_LOCK_UNLOCKED,	\
+				RW_DEP_MAP_INIT(lockname) }
+#endif
+
+#define DEFINE_RWLOCK(x)	rwlock_t x = __RW_LOCK_UNLOCKED(x)
+
+#endif /* __LINUX_RWLOCK_TYPES_H */
diff --git a/include/linux/rwsem-spinlock.h b/include/linux/rwsem-spinlock.h
new file mode 100644
index 00000000..d5b13bc0
--- /dev/null
+++ b/include/linux/rwsem-spinlock.h
@@ -0,0 +1,45 @@
+/* rwsem-spinlock.h: fallback C implementation
+ *
+ * Copyright (c) 2001   David Howells (dhowells@redhat.com).
+ * - Derived partially from ideas by Andrea Arcangeli <andrea@suse.de>
+ * - Derived also from comments by Linus
+ */
+
+#ifndef _LINUX_RWSEM_SPINLOCK_H
+#define _LINUX_RWSEM_SPINLOCK_H
+
+#ifndef _LINUX_RWSEM_H
+#error "please don't include linux/rwsem-spinlock.h directly, use linux/rwsem.h instead"
+#endif
+
+#ifdef __KERNEL__
+/*
+ * the rw-semaphore definition
+ * - if activity is 0 then there are no active readers or writers
+ * - if activity is +ve then that is the number of active readers
+ * - if activity is -1 then there is one active writer
+ * - if wait_list is not empty, then there are processes waiting for the semaphore
+ */
+struct rw_semaphore {
+	__s32			activity;
+	raw_spinlock_t		wait_lock;
+	struct list_head	wait_list;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	struct lockdep_map dep_map;
+#endif
+};
+
+#define RWSEM_UNLOCKED_VALUE		0x00000000
+
+extern void __down_read(struct rw_semaphore *sem);
+extern int __down_read_trylock(struct rw_semaphore *sem);
+extern void __down_write(struct rw_semaphore *sem);
+extern void __down_write_nested(struct rw_semaphore *sem, int subclass);
+extern int __down_write_trylock(struct rw_semaphore *sem);
+extern void __up_read(struct rw_semaphore *sem);
+extern void __up_write(struct rw_semaphore *sem);
+extern void __downgrade_write(struct rw_semaphore *sem);
+extern int rwsem_is_locked(struct rw_semaphore *sem);
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_RWSEM_SPINLOCK_H */
diff --git a/include/linux/rwsem.h b/include/linux/rwsem.h
new file mode 100644
index 00000000..54bd7cd7
--- /dev/null
+++ b/include/linux/rwsem.h
@@ -0,0 +1,133 @@
+/* rwsem.h: R/W semaphores, public interface
+ *
+ * Written by David Howells (dhowells@redhat.com).
+ * Derived from asm-i386/semaphore.h
+ */
+
+#ifndef _LINUX_RWSEM_H
+#define _LINUX_RWSEM_H
+
+#include <linux/linkage.h>
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+#include <linux/atomic.h>
+
+struct rw_semaphore;
+
+#ifdef CONFIG_RWSEM_GENERIC_SPINLOCK
+#include <linux/rwsem-spinlock.h> /* use a generic implementation */
+#else
+/* All arch specific implementations share the same struct */
+struct rw_semaphore {
+	long			count;
+	raw_spinlock_t		wait_lock;
+	struct list_head	wait_list;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	struct lockdep_map	dep_map;
+#endif
+};
+
+extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *);
+extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
+
+/* Include the arch specific part */
+#include <asm/rwsem.h>
+
+/* In all implementations count != 0 means locked */
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+	return sem->count != 0;
+}
+
+#endif
+
+/* Common initializer macros and functions */
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
+#else
+# define __RWSEM_DEP_MAP_INIT(lockname)
+#endif
+
+#define __RWSEM_INITIALIZER(name)			\
+	{ RWSEM_UNLOCKED_VALUE,				\
+	  __RAW_SPIN_LOCK_UNLOCKED(name.wait_lock),	\
+	  LIST_HEAD_INIT((name).wait_list)		\
+	  __RWSEM_DEP_MAP_INIT(name) }
+
+#define DECLARE_RWSEM(name) \
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
+			 struct lock_class_key *key);
+
+#define init_rwsem(sem)						\
+do {								\
+	static struct lock_class_key __key;			\
+								\
+	__init_rwsem((sem), #sem, &__key);			\
+} while (0)
+
+/*
+ * lock for reading
+ */
+extern void down_read(struct rw_semaphore *sem);
+
+/*
+ * trylock for reading -- returns 1 if successful, 0 if contention
+ */
+extern int down_read_trylock(struct rw_semaphore *sem);
+
+/*
+ * lock for writing
+ */
+extern void down_write(struct rw_semaphore *sem);
+
+/*
+ * trylock for writing -- returns 1 if successful, 0 if contention
+ */
+extern int down_write_trylock(struct rw_semaphore *sem);
+
+/*
+ * release a read lock
+ */
+extern void up_read(struct rw_semaphore *sem);
+
+/*
+ * release a write lock
+ */
+extern void up_write(struct rw_semaphore *sem);
+
+/*
+ * downgrade write lock to read lock
+ */
+extern void downgrade_write(struct rw_semaphore *sem);
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+/*
+ * nested locking. NOTE: rwsems are not allowed to recurse
+ * (which occurs if the same task tries to acquire the same
+ * lock instance multiple times), but multiple locks of the
+ * same lock class might be taken, if the order of the locks
+ * is always the same. This ordering rule can be expressed
+ * to lockdep via the _nested() APIs, but enumerating the
+ * subclasses that are used. (If the nesting relationship is
+ * static then another method for expressing nested locking is
+ * the explicit definition of lock class keys and the use of
+ * lockdep_set_class() at lock initialization time.
+ * See Documentation/lockdep-design.txt for more details.)
+ */
+extern void down_read_nested(struct rw_semaphore *sem, int subclass);
+extern void down_write_nested(struct rw_semaphore *sem, int subclass);
+#else
+# define down_read_nested(sem, subclass)		down_read(sem)
+# define down_write_nested(sem, subclass)	down_write(sem)
+#endif
+
+#endif /* _LINUX_RWSEM_H */
diff --git a/include/linux/rxrpc.h b/include/linux/rxrpc.h
new file mode 100644
index 00000000..a53915cd
--- /dev/null
+++ b/include/linux/rxrpc.h
@@ -0,0 +1,69 @@
+/* AF_RXRPC parameters
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_RXRPC_H
+#define _LINUX_RXRPC_H
+
+#include <linux/in.h>
+#include <linux/in6.h>
+
+/*
+ * RxRPC socket address
+ */
+struct sockaddr_rxrpc {
+	sa_family_t	srx_family;	/* address family */
+	u16		srx_service;	/* service desired */
+	u16		transport_type;	/* type of transport socket (SOCK_DGRAM) */
+	u16		transport_len;	/* length of transport address */
+	union {
+		sa_family_t family;		/* transport address family */
+		struct sockaddr_in sin;		/* IPv4 transport address */
+		struct sockaddr_in6 sin6;	/* IPv6 transport address */
+	} transport;
+};
+
+/*
+ * RxRPC socket options
+ */
+#define RXRPC_SECURITY_KEY		1	/* [clnt] set client security key */
+#define RXRPC_SECURITY_KEYRING		2	/* [srvr] set ring of server security keys */
+#define RXRPC_EXCLUSIVE_CONNECTION	3	/* [clnt] use exclusive RxRPC connection */
+#define RXRPC_MIN_SECURITY_LEVEL	4	/* minimum security level */
+
+/*
+ * RxRPC control messages
+ * - terminal messages mean that a user call ID tag can be recycled
+ */
+#define RXRPC_USER_CALL_ID	1	/* user call ID specifier */
+#define RXRPC_ABORT		2	/* abort request / notification [terminal] */
+#define RXRPC_ACK		3	/* [Server] RPC op final ACK received [terminal] */
+#define RXRPC_NET_ERROR		5	/* network error received [terminal] */
+#define RXRPC_BUSY		6	/* server busy received [terminal] */
+#define RXRPC_LOCAL_ERROR	7	/* local error generated [terminal] */
+#define RXRPC_NEW_CALL		8	/* [Server] new incoming call notification */
+#define RXRPC_ACCEPT		9	/* [Server] accept request */
+
+/*
+ * RxRPC security levels
+ */
+#define RXRPC_SECURITY_PLAIN	0	/* plain secure-checksummed packets only */
+#define RXRPC_SECURITY_AUTH	1	/* authenticated packets */
+#define RXRPC_SECURITY_ENCRYPT	2	/* encrypted packets */
+
+/*
+ * RxRPC security indices
+ */
+#define RXRPC_SECURITY_NONE	0	/* no security protocol */
+#define RXRPC_SECURITY_RXKAD	2	/* kaserver or kerberos 4 */
+#define RXRPC_SECURITY_RXGK	4	/* gssapi-based */
+#define RXRPC_SECURITY_RXK5	5	/* kerberos 5 */
+
+#endif /* _LINUX_RXRPC_H */
diff --git a/include/linux/s3c_adc_battery.h b/include/linux/s3c_adc_battery.h
new file mode 100644
index 00000000..99dadbff
--- /dev/null
+++ b/include/linux/s3c_adc_battery.h
@@ -0,0 +1,41 @@
+#ifndef _S3C_ADC_BATTERY_H
+#define _S3C_ADC_BATTERY_H
+
+struct s3c_adc_bat_thresh {
+	int volt; /* mV */
+	int cur; /* mA */
+	int level; /* percent */
+};
+
+struct s3c_adc_bat_pdata {
+	int (*init)(void);
+	void (*exit)(void);
+	void (*enable_charger)(void);
+	void (*disable_charger)(void);
+
+	int gpio_charge_finished;
+	int gpio_inverted;
+
+	const struct s3c_adc_bat_thresh *lut_noac;
+	unsigned int lut_noac_cnt;
+	const struct s3c_adc_bat_thresh *lut_acin;
+	unsigned int lut_acin_cnt;
+
+	const unsigned int volt_channel;
+	const unsigned int current_channel;
+	const unsigned int backup_volt_channel;
+
+	const unsigned int volt_samples;
+	const unsigned int current_samples;
+	const unsigned int backup_volt_samples;
+
+	const unsigned int volt_mult;
+	const unsigned int current_mult;
+	const unsigned int backup_volt_mult;
+	const unsigned int internal_impedance;
+
+	const unsigned int backup_volt_max;
+	const unsigned int backup_volt_min;
+};
+
+#endif
diff --git a/include/linux/sa11x0-dma.h b/include/linux/sa11x0-dma.h
new file mode 100644
index 00000000..65839a58
--- /dev/null
+++ b/include/linux/sa11x0-dma.h
@@ -0,0 +1,24 @@
+/*
+ * SA11x0 DMA Engine support
+ *
+ * Copyright (C) 2012 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __LINUX_SA11X0_DMA_H
+#define __LINUX_SA11X0_DMA_H
+
+struct dma_chan;
+
+#if defined(CONFIG_DMA_SA11X0) || defined(CONFIG_DMA_SA11X0_MODULE)
+bool sa11x0_dma_filter_fn(struct dma_chan *, void *);
+#else
+static inline bool sa11x0_dma_filter_fn(struct dma_chan *c, void *d)
+{
+	return false;
+}
+#endif
+
+#endif
diff --git a/include/linux/sc26198.h b/include/linux/sc26198.h
new file mode 100644
index 00000000..7ca35aba
--- /dev/null
+++ b/include/linux/sc26198.h
@@ -0,0 +1,533 @@
+/*****************************************************************************/
+
+/*
+ *	sc26198.h  -- SC26198 UART hardware info.
+ *
+ *	Copyright (C) 1995-1998  Stallion Technologies
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License
+ *	along with this program; if not, write to the Free Software
+ *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*****************************************************************************/
+#ifndef	_SC26198_H
+#define	_SC26198_H
+/*****************************************************************************/
+
+/*
+ *	Define the number of async ports per sc26198 uart device.
+ */
+#define	SC26198_PORTS		8
+
+/*
+ *	Baud rate timing clocks. All derived from a master 14.7456 MHz clock.
+ */
+#define	SC26198_MASTERCLOCK	14745600L
+#define	SC26198_DCLK		(SC26198_MASTERCLOCK)
+#define	SC26198_CCLK		(SC26198_MASTERCLOCK / 2)
+#define	SC26198_BCLK		(SC26198_MASTERCLOCK / 4)
+
+/*
+ *	Define internal FIFO sizes for the 26198 ports.
+ */
+#define	SC26198_TXFIFOSIZE	16
+#define	SC26198_RXFIFOSIZE	16
+
+/*****************************************************************************/
+
+/*
+ *	Global register definitions. These registers are global to each 26198
+ *	device, not specific ports on it.
+ */
+#define	TSTR		0x0d
+#define	GCCR		0x0f
+#define	ICR		0x1b
+#define	WDTRCR		0x1d
+#define	IVR		0x1f
+#define	BRGTRUA		0x84
+#define	GPOSR		0x87
+#define	GPOC		0x8b
+#define	UCIR		0x8c
+#define	CIR		0x8c
+#define	BRGTRUB		0x8d
+#define	GRXFIFO		0x8e
+#define	GTXFIFO		0x8e
+#define	GCCR2		0x8f
+#define	BRGTRLA		0x94
+#define	GPOR		0x97
+#define	GPOD		0x9b
+#define	BRGTCR		0x9c
+#define	GICR		0x9c
+#define	BRGTRLB		0x9d
+#define	GIBCR		0x9d
+#define	GITR		0x9f
+
+/*
+ *	Per port channel registers. These are the register offsets within
+ *	the port address space, so need to have the port address (0 to 7)
+ *	inserted in bit positions 4:6.
+ */
+#define	MR0		0x00
+#define	MR1		0x01
+#define	IOPCR		0x02
+#define	BCRBRK		0x03
+#define	BCRCOS		0x04
+#define	BCRX		0x06
+#define	BCRA		0x07
+#define	XONCR		0x08
+#define	XOFFCR		0x09
+#define	ARCR		0x0a
+#define	RXCSR		0x0c
+#define	TXCSR		0x0e
+#define	MR2		0x80
+#define	SR		0x81
+#define SCCR		0x81
+#define	ISR		0x82
+#define	IMR		0x82
+#define	TXFIFO		0x83
+#define	RXFIFO		0x83
+#define	IPR		0x84
+#define	IOPIOR		0x85
+#define	XISR		0x86
+
+/*
+ *	For any given port calculate the address to use to access a specified
+ *	register. This is only used for unusual access, mostly this is done
+ *	through the assembler access routines.
+ */
+#define	SC26198_PORTREG(port,reg)	((((port) & 0x07) << 4) | (reg))
+
+/*****************************************************************************/
+
+/*
+ *	Global configuration control register bit definitions.
+ */
+#define	GCCR_NOACK		0x00
+#define	GCCR_IVRACK		0x02
+#define	GCCR_IVRCHANACK		0x04
+#define	GCCR_IVRTYPCHANACK	0x06
+#define	GCCR_ASYNCCYCLE		0x00
+#define	GCCR_SYNCCYCLE		0x40
+
+/*****************************************************************************/
+
+/*
+ *	Mode register 0 bit definitions.
+ */
+#define	MR0_ADDRNONE		0x00
+#define	MR0_AUTOWAKE		0x01
+#define	MR0_AUTODOZE		0x02
+#define	MR0_AUTOWAKEDOZE	0x03
+#define	MR0_SWFNONE		0x00
+#define	MR0_SWFTX		0x04
+#define	MR0_SWFRX		0x08
+#define	MR0_SWFRXTX		0x0c
+#define	MR0_TXMASK		0x30
+#define	MR0_TXEMPTY		0x00
+#define	MR0_TXHIGH		0x10
+#define	MR0_TXHALF		0x20
+#define	MR0_TXRDY		0x00
+#define	MR0_ADDRNT		0x00
+#define	MR0_ADDRT		0x40
+#define	MR0_SWFNT		0x00
+#define	MR0_SWFT		0x80
+
+/*
+ *	Mode register 1 bit definitions.
+ */
+#define	MR1_CS5			0x00
+#define	MR1_CS6			0x01
+#define	MR1_CS7			0x02
+#define	MR1_CS8			0x03
+#define	MR1_PAREVEN		0x00
+#define	MR1_PARODD		0x04
+#define	MR1_PARENB		0x00
+#define	MR1_PARFORCE		0x08
+#define	MR1_PARNONE		0x10
+#define	MR1_PARSPECIAL		0x18
+#define	MR1_ERRCHAR		0x00
+#define	MR1_ERRBLOCK		0x20
+#define	MR1_ISRUNMASKED		0x00
+#define	MR1_ISRMASKED		0x40
+#define	MR1_AUTORTS		0x80
+
+/*
+ *	Mode register 2 bit definitions.
+ */
+#define	MR2_STOP1		0x00
+#define	MR2_STOP15		0x01
+#define	MR2_STOP2		0x02
+#define	MR2_STOP916		0x03
+#define	MR2_RXFIFORDY		0x00
+#define	MR2_RXFIFOHALF		0x04
+#define	MR2_RXFIFOHIGH		0x08
+#define	MR2_RXFIFOFULL		0x0c
+#define	MR2_AUTOCTS		0x10
+#define	MR2_TXRTS		0x20
+#define	MR2_MODENORM		0x00
+#define	MR2_MODEAUTOECHO	0x40
+#define	MR2_MODELOOP		0x80
+#define	MR2_MODEREMECHO		0xc0
+
+/*****************************************************************************/
+
+/*
+ *	Baud Rate Generator (BRG) selector values.
+ */
+#define	BRG_50			0x00
+#define	BRG_75			0x01
+#define	BRG_150			0x02
+#define	BRG_200			0x03
+#define	BRG_300			0x04
+#define	BRG_450			0x05
+#define	BRG_600			0x06
+#define	BRG_900			0x07
+#define	BRG_1200		0x08
+#define	BRG_1800		0x09
+#define	BRG_2400		0x0a
+#define	BRG_3600		0x0b
+#define	BRG_4800		0x0c
+#define	BRG_7200		0x0d
+#define	BRG_9600		0x0e
+#define	BRG_14400		0x0f
+#define	BRG_19200		0x10
+#define	BRG_28200		0x11
+#define	BRG_38400		0x12
+#define	BRG_57600		0x13
+#define	BRG_115200		0x14
+#define	BRG_230400		0x15
+#define	BRG_GIN0		0x16
+#define	BRG_GIN1		0x17
+#define	BRG_CT0			0x18
+#define	BRG_CT1			0x19
+#define	BRG_RX2TX316		0x1b
+#define	BRG_RX2TX31		0x1c
+
+#define	SC26198_MAXBAUD		921600
+
+/*****************************************************************************/
+
+/*
+ *	Command register command definitions.
+ */
+#define	CR_NULL			0x04
+#define	CR_ADDRNORMAL		0x0c
+#define	CR_RXRESET		0x14
+#define	CR_TXRESET		0x1c
+#define	CR_CLEARRXERR		0x24
+#define	CR_BREAKRESET		0x2c
+#define	CR_TXSTARTBREAK		0x34
+#define	CR_TXSTOPBREAK		0x3c
+#define	CR_RTSON		0x44
+#define	CR_RTSOFF		0x4c
+#define	CR_ADDRINIT		0x5c
+#define	CR_RXERRBLOCK		0x6c
+#define	CR_TXSENDXON		0x84
+#define	CR_TXSENDXOFF		0x8c
+#define	CR_GANGXONSET		0x94
+#define	CR_GANGXOFFSET		0x9c
+#define	CR_GANGXONINIT		0xa4
+#define	CR_GANGXOFFINIT		0xac
+#define	CR_HOSTXON		0xb4
+#define	CR_HOSTXOFF		0xbc
+#define	CR_CANCELXOFF		0xc4
+#define	CR_ADDRRESET		0xdc
+#define	CR_RESETALLPORTS	0xf4
+#define	CR_RESETALL		0xfc
+
+#define	CR_RXENABLE		0x01
+#define	CR_TXENABLE		0x02
+
+/*****************************************************************************/
+
+/*
+ *	Channel status register.
+ */
+#define	SR_RXRDY		0x01
+#define	SR_RXFULL		0x02
+#define	SR_TXRDY		0x04
+#define	SR_TXEMPTY		0x08
+#define	SR_RXOVERRUN		0x10
+#define	SR_RXPARITY		0x20
+#define	SR_RXFRAMING		0x40
+#define	SR_RXBREAK		0x80
+
+#define	SR_RXERRS		(SR_RXPARITY | SR_RXFRAMING | SR_RXOVERRUN)
+
+/*****************************************************************************/
+
+/*
+ *	Interrupt status register and interrupt mask register bit definitions.
+ */
+#define	IR_TXRDY		0x01
+#define	IR_RXRDY		0x02
+#define	IR_RXBREAK		0x04
+#define	IR_XONXOFF		0x10
+#define	IR_ADDRRECOG		0x20
+#define	IR_RXWATCHDOG		0x40
+#define	IR_IOPORT		0x80
+
+/*****************************************************************************/
+
+/*
+ *	Interrupt vector register field definitions.
+ */
+#define	IVR_CHANMASK		0x07
+#define	IVR_TYPEMASK		0x18
+#define	IVR_CONSTMASK		0xc0
+
+#define	IVR_RXDATA		0x10
+#define	IVR_RXBADDATA		0x18
+#define	IVR_TXDATA		0x08
+#define	IVR_OTHER		0x00
+
+/*****************************************************************************/
+
+/*
+ *	BRG timer control register bit definitions.
+ */
+#define	BRGCTCR_DISABCLK0	0x00
+#define	BRGCTCR_ENABCLK0	0x08
+#define	BRGCTCR_DISABCLK1	0x00
+#define	BRGCTCR_ENABCLK1	0x80
+
+#define	BRGCTCR_0SCLK16		0x00
+#define	BRGCTCR_0SCLK32		0x01
+#define	BRGCTCR_0SCLK64		0x02
+#define	BRGCTCR_0SCLK128	0x03
+#define	BRGCTCR_0X1		0x04
+#define	BRGCTCR_0X12		0x05
+#define	BRGCTCR_0IO1A		0x06
+#define	BRGCTCR_0GIN0		0x07
+
+#define	BRGCTCR_1SCLK16		0x00
+#define	BRGCTCR_1SCLK32		0x10
+#define	BRGCTCR_1SCLK64		0x20
+#define	BRGCTCR_1SCLK128	0x30
+#define	BRGCTCR_1X1		0x40
+#define	BRGCTCR_1X12		0x50
+#define	BRGCTCR_1IO1B		0x60
+#define	BRGCTCR_1GIN1		0x70
+
+/*****************************************************************************/
+
+/*
+ *	Watch dog timer enable register.
+ */
+#define	WDTRCR_ENABALL		0xff
+
+/*****************************************************************************/
+
+/*
+ *	XON/XOFF interrupt status register.
+ */
+#define	XISR_TXCHARMASK		0x03
+#define	XISR_TXCHARNORMAL	0x00
+#define	XISR_TXWAIT		0x01
+#define	XISR_TXXOFFPEND		0x02
+#define	XISR_TXXONPEND		0x03
+
+#define	XISR_TXFLOWMASK		0x0c
+#define	XISR_TXNORMAL		0x00
+#define	XISR_TXSTOPPEND		0x04
+#define	XISR_TXSTARTED		0x08
+#define	XISR_TXSTOPPED		0x0c
+
+#define	XISR_RXFLOWMASK		0x30
+#define	XISR_RXFLOWNONE		0x00
+#define	XISR_RXXONSENT		0x10
+#define	XISR_RXXOFFSENT		0x20
+
+#define	XISR_RXXONGOT		0x40
+#define	XISR_RXXOFFGOT		0x80
+
+/*****************************************************************************/
+
+/*
+ *	Current interrupt register.
+ */
+#define	CIR_TYPEMASK		0xc0
+#define	CIR_TYPEOTHER		0x00
+#define	CIR_TYPETX		0x40
+#define	CIR_TYPERXGOOD		0x80
+#define	CIR_TYPERXBAD		0xc0
+
+#define	CIR_RXDATA		0x80
+#define	CIR_RXBADDATA		0x40
+#define	CIR_TXDATA		0x40
+
+#define	CIR_CHANMASK		0x07
+#define	CIR_CNTMASK		0x38
+
+#define	CIR_SUBTYPEMASK		0x38
+#define	CIR_SUBNONE		0x00
+#define	CIR_SUBCOS		0x08
+#define	CIR_SUBADDR		0x10
+#define	CIR_SUBXONXOFF		0x18
+#define	CIR_SUBBREAK		0x28
+
+/*****************************************************************************/
+
+/*
+ *	Global interrupting channel register.
+ */
+#define	GICR_CHANMASK		0x07
+
+/*****************************************************************************/
+
+/*
+ *	Global interrupting byte count register.
+ */
+#define	GICR_COUNTMASK		0x0f
+
+/*****************************************************************************/
+
+/*
+ *	Global interrupting type register.
+ */
+#define	GITR_RXMASK		0xc0
+#define	GITR_RXNONE		0x00
+#define	GITR_RXBADDATA		0x80
+#define	GITR_RXGOODDATA		0xc0
+#define	GITR_TXDATA		0x20
+
+#define	GITR_SUBTYPEMASK	0x07
+#define	GITR_SUBNONE		0x00
+#define	GITR_SUBCOS		0x01
+#define	GITR_SUBADDR		0x02
+#define	GITR_SUBXONXOFF		0x03
+#define	GITR_SUBBREAK		0x05
+
+/*****************************************************************************/
+
+/*
+ *	Input port change register.
+ */
+#define	IPR_CTS			0x01
+#define	IPR_DTR			0x02
+#define	IPR_RTS			0x04
+#define	IPR_DCD			0x08
+#define	IPR_CTSCHANGE		0x10
+#define	IPR_DTRCHANGE		0x20
+#define	IPR_RTSCHANGE		0x40
+#define	IPR_DCDCHANGE		0x80
+
+#define	IPR_CHANGEMASK		0xf0
+
+/*****************************************************************************/
+
+/*
+ *	IO port interrupt and output register.
+ */
+#define	IOPR_CTS		0x01
+#define	IOPR_DTR		0x02
+#define	IOPR_RTS		0x04
+#define	IOPR_DCD		0x08
+#define	IOPR_CTSCOS		0x10
+#define	IOPR_DTRCOS		0x20
+#define	IOPR_RTSCOS		0x40
+#define	IOPR_DCDCOS		0x80
+
+/*****************************************************************************/
+
+/*
+ *	IO port configuration register.
+ */
+#define	IOPCR_SETCTS		0x00
+#define	IOPCR_SETDTR		0x04
+#define	IOPCR_SETRTS		0x10
+#define	IOPCR_SETDCD		0x00
+
+#define	IOPCR_SETSIGS		(IOPCR_SETRTS | IOPCR_SETRTS | IOPCR_SETDTR | IOPCR_SETDCD)
+
+/*****************************************************************************/
+
+/*
+ *	General purpose output select register.
+ */
+#define	GPORS_TXC1XA		0x08
+#define	GPORS_TXC16XA		0x09
+#define	GPORS_RXC16XA		0x0a
+#define	GPORS_TXC16XB		0x0b
+#define	GPORS_GPOR3		0x0c
+#define	GPORS_GPOR2		0x0d
+#define	GPORS_GPOR1		0x0e
+#define	GPORS_GPOR0		0x0f
+
+/*****************************************************************************/
+
+/*
+ *	General purpose output register.
+ */
+#define	GPOR_0			0x01
+#define	GPOR_1			0x02
+#define	GPOR_2			0x04
+#define	GPOR_3			0x08
+
+/*****************************************************************************/
+
+/*
+ *	General purpose output clock register.
+ */
+#define	GPORC_0NONE		0x00
+#define	GPORC_0GIN0		0x01
+#define	GPORC_0GIN1		0x02
+#define	GPORC_0IO3A		0x02
+
+#define	GPORC_1NONE		0x00
+#define	GPORC_1GIN0		0x04
+#define	GPORC_1GIN1		0x08
+#define	GPORC_1IO3C		0x0c
+
+#define	GPORC_2NONE		0x00
+#define	GPORC_2GIN0		0x10
+#define	GPORC_2GIN1		0x20
+#define	GPORC_2IO3E		0x20
+
+#define	GPORC_3NONE		0x00
+#define	GPORC_3GIN0		0x40
+#define	GPORC_3GIN1		0x80
+#define	GPORC_3IO3G		0xc0
+
+/*****************************************************************************/
+
+/*
+ *	General purpose output data register.
+ */
+#define	GPOD_0MASK		0x03
+#define	GPOD_0SET1		0x00
+#define	GPOD_0SET0		0x01
+#define	GPOD_0SETR0		0x02
+#define	GPOD_0SETIO3B		0x03
+
+#define	GPOD_1MASK		0x0c
+#define	GPOD_1SET1		0x00
+#define	GPOD_1SET0		0x04
+#define	GPOD_1SETR0		0x08
+#define	GPOD_1SETIO3D		0x0c
+
+#define	GPOD_2MASK		0x30
+#define	GPOD_2SET1		0x00
+#define	GPOD_2SET0		0x10
+#define	GPOD_2SETR0		0x20
+#define	GPOD_2SETIO3F		0x30
+
+#define	GPOD_3MASK		0xc0
+#define	GPOD_3SET1		0x00
+#define	GPOD_3SET0		0x40
+#define	GPOD_3SETR0		0x80
+#define	GPOD_3SETIO3H		0xc0
+
+/*****************************************************************************/
+#endif
diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h
new file mode 100644
index 00000000..ac9586da
--- /dev/null
+++ b/include/linux/scatterlist.h
@@ -0,0 +1,269 @@
+#ifndef _LINUX_SCATTERLIST_H
+#define _LINUX_SCATTERLIST_H
+
+#include <linux/string.h>
+#include <linux/bug.h>
+#include <linux/mm.h>
+
+#include <asm/types.h>
+#include <asm/scatterlist.h>
+#include <asm/io.h>
+
+struct sg_table {
+	struct scatterlist *sgl;	/* the list */
+	unsigned int nents;		/* number of mapped entries */
+	unsigned int orig_nents;	/* original size of list */
+};
+
+/*
+ * Notes on SG table design.
+ *
+ * Architectures must provide an unsigned long page_link field in the
+ * scatterlist struct. We use that to place the page pointer AND encode
+ * information about the sg table as well. The two lower bits are reserved
+ * for this information.
+ *
+ * If bit 0 is set, then the page_link contains a pointer to the next sg
+ * table list. Otherwise the next entry is at sg + 1.
+ *
+ * If bit 1 is set, then this sg entry is the last element in a list.
+ *
+ * See sg_next().
+ *
+ */
+
+#define SG_MAGIC	0x87654321
+
+/*
+ * We overload the LSB of the page pointer to indicate whether it's
+ * a valid sg entry, or whether it points to the start of a new scatterlist.
+ * Those low bits are there for everyone! (thanks mason :-)
+ */
+#define sg_is_chain(sg)		((sg)->page_link & 0x01)
+#define sg_is_last(sg)		((sg)->page_link & 0x02)
+#define sg_chain_ptr(sg)	\
+	((struct scatterlist *) ((sg)->page_link & ~0x03))
+
+/**
+ * sg_assign_page - Assign a given page to an SG entry
+ * @sg:		    SG entry
+ * @page:	    The page
+ *
+ * Description:
+ *   Assign page to sg entry. Also see sg_set_page(), the most commonly used
+ *   variant.
+ *
+ **/
+static inline void sg_assign_page(struct scatterlist *sg, struct page *page)
+{
+	unsigned long page_link = sg->page_link & 0x3;
+
+	/*
+	 * In order for the low bit stealing approach to work, pages
+	 * must be aligned at a 32-bit boundary as a minimum.
+	 */
+	BUG_ON((unsigned long) page & 0x03);
+#ifdef CONFIG_DEBUG_SG
+	BUG_ON(sg->sg_magic != SG_MAGIC);
+	BUG_ON(sg_is_chain(sg));
+#endif
+	sg->page_link = page_link | (unsigned long) page;
+}
+
+/**
+ * sg_set_page - Set sg entry to point at given page
+ * @sg:		 SG entry
+ * @page:	 The page
+ * @len:	 Length of data
+ * @offset:	 Offset into page
+ *
+ * Description:
+ *   Use this function to set an sg entry pointing at a page, never assign
+ *   the page directly. We encode sg table information in the lower bits
+ *   of the page pointer. See sg_page() for looking up the page belonging
+ *   to an sg entry.
+ *
+ **/
+static inline void sg_set_page(struct scatterlist *sg, struct page *page,
+			       unsigned int len, unsigned int offset)
+{
+	sg_assign_page(sg, page);
+	sg->offset = offset;
+	sg->length = len;
+}
+
+static inline struct page *sg_page(struct scatterlist *sg)
+{
+#ifdef CONFIG_DEBUG_SG
+	BUG_ON(sg->sg_magic != SG_MAGIC);
+	BUG_ON(sg_is_chain(sg));
+#endif
+	return (struct page *)((sg)->page_link & ~0x3);
+}
+
+/**
+ * sg_set_buf - Set sg entry to point at given data
+ * @sg:		 SG entry
+ * @buf:	 Data
+ * @buflen:	 Data length
+ *
+ **/
+static inline void sg_set_buf(struct scatterlist *sg, const void *buf,
+			      unsigned int buflen)
+{
+	sg_set_page(sg, virt_to_page(buf), buflen, offset_in_page(buf));
+}
+
+/*
+ * Loop over each sg element, following the pointer to a new list if necessary
+ */
+#define for_each_sg(sglist, sg, nr, __i)	\
+	for (__i = 0, sg = (sglist); __i < (nr); __i++, sg = sg_next(sg))
+
+/**
+ * sg_chain - Chain two sglists together
+ * @prv:	First scatterlist
+ * @prv_nents:	Number of entries in prv
+ * @sgl:	Second scatterlist
+ *
+ * Description:
+ *   Links @prv@ and @sgl@ together, to form a longer scatterlist.
+ *
+ **/
+static inline void sg_chain(struct scatterlist *prv, unsigned int prv_nents,
+			    struct scatterlist *sgl)
+{
+#ifndef ARCH_HAS_SG_CHAIN
+	BUG();
+#endif
+
+	/*
+	 * offset and length are unused for chain entry.  Clear them.
+	 */
+	prv[prv_nents - 1].offset = 0;
+	prv[prv_nents - 1].length = 0;
+
+	/*
+	 * Set lowest bit to indicate a link pointer, and make sure to clear
+	 * the termination bit if it happens to be set.
+	 */
+	prv[prv_nents - 1].page_link = ((unsigned long) sgl | 0x01) & ~0x02;
+}
+
+/**
+ * sg_mark_end - Mark the end of the scatterlist
+ * @sg:		 SG entryScatterlist
+ *
+ * Description:
+ *   Marks the passed in sg entry as the termination point for the sg
+ *   table. A call to sg_next() on this entry will return NULL.
+ *
+ **/
+static inline void sg_mark_end(struct scatterlist *sg)
+{
+#ifdef CONFIG_DEBUG_SG
+	BUG_ON(sg->sg_magic != SG_MAGIC);
+#endif
+	/*
+	 * Set termination bit, clear potential chain bit
+	 */
+	sg->page_link |= 0x02;
+	sg->page_link &= ~0x01;
+}
+
+/**
+ * sg_phys - Return physical address of an sg entry
+ * @sg:	     SG entry
+ *
+ * Description:
+ *   This calls page_to_phys() on the page in this sg entry, and adds the
+ *   sg offset. The caller must know that it is legal to call page_to_phys()
+ *   on the sg page.
+ *
+ **/
+static inline dma_addr_t sg_phys(struct scatterlist *sg)
+{
+	return page_to_phys(sg_page(sg)) + sg->offset;
+}
+
+/**
+ * sg_virt - Return virtual address of an sg entry
+ * @sg:      SG entry
+ *
+ * Description:
+ *   This calls page_address() on the page in this sg entry, and adds the
+ *   sg offset. The caller must know that the sg page has a valid virtual
+ *   mapping.
+ *
+ **/
+static inline void *sg_virt(struct scatterlist *sg)
+{
+	return page_address(sg_page(sg)) + sg->offset;
+}
+
+struct scatterlist *sg_next(struct scatterlist *);
+struct scatterlist *sg_last(struct scatterlist *s, unsigned int);
+void sg_init_table(struct scatterlist *, unsigned int);
+void sg_init_one(struct scatterlist *, const void *, unsigned int);
+
+typedef struct scatterlist *(sg_alloc_fn)(unsigned int, gfp_t);
+typedef void (sg_free_fn)(struct scatterlist *, unsigned int);
+
+void __sg_free_table(struct sg_table *, unsigned int, sg_free_fn *);
+void sg_free_table(struct sg_table *);
+int __sg_alloc_table(struct sg_table *, unsigned int, unsigned int, gfp_t,
+		     sg_alloc_fn *);
+int sg_alloc_table(struct sg_table *, unsigned int, gfp_t);
+
+size_t sg_copy_from_buffer(struct scatterlist *sgl, unsigned int nents,
+			   void *buf, size_t buflen);
+size_t sg_copy_to_buffer(struct scatterlist *sgl, unsigned int nents,
+			 void *buf, size_t buflen);
+
+/*
+ * Maximum number of entries that will be allocated in one piece, if
+ * a list larger than this is required then chaining will be utilized.
+ */
+#define SG_MAX_SINGLE_ALLOC		(PAGE_SIZE / sizeof(struct scatterlist))
+
+
+/*
+ * Mapping sg iterator
+ *
+ * Iterates over sg entries mapping page-by-page.  On each successful
+ * iteration, @miter->page points to the mapped page and
+ * @miter->length bytes of data can be accessed at @miter->addr.  As
+ * long as an interation is enclosed between start and stop, the user
+ * is free to choose control structure and when to stop.
+ *
+ * @miter->consumed is set to @miter->length on each iteration.  It
+ * can be adjusted if the user can't consume all the bytes in one go.
+ * Also, a stopped iteration can be resumed by calling next on it.
+ * This is useful when iteration needs to release all resources and
+ * continue later (e.g. at the next interrupt).
+ */
+
+#define SG_MITER_ATOMIC		(1 << 0)	 /* use kmap_atomic */
+#define SG_MITER_TO_SG		(1 << 1)	/* flush back to phys on unmap */
+#define SG_MITER_FROM_SG	(1 << 2)	/* nop */
+
+struct sg_mapping_iter {
+	/* the following three fields can be accessed directly */
+	struct page		*page;		/* currently mapped page */
+	void			*addr;		/* pointer to the mapped area */
+	size_t			length;		/* length of the mapped area */
+	size_t			consumed;	/* number of consumed bytes */
+
+	/* these are internal states, keep away */
+	struct scatterlist	*__sg;		/* current entry */
+	unsigned int		__nents;	/* nr of remaining entries */
+	unsigned int		__offset;	/* offset within sg */
+	unsigned int		__flags;
+};
+
+void sg_miter_start(struct sg_mapping_iter *miter, struct scatterlist *sgl,
+		    unsigned int nents, unsigned int flags);
+bool sg_miter_next(struct sg_mapping_iter *miter);
+void sg_miter_stop(struct sg_mapping_iter *miter);
+
+#endif /* _LINUX_SCATTERLIST_H */
diff --git a/include/linux/scc.h b/include/linux/scc.h
new file mode 100644
index 00000000..3495bd95
--- /dev/null
+++ b/include/linux/scc.h
@@ -0,0 +1,252 @@
+/* $Id: scc.h,v 1.29 1997/04/02 14:56:45 jreuter Exp jreuter $ */
+
+#ifndef	_SCC_H
+#define	_SCC_H
+
+
+/* selection of hardware types */
+
+#define PA0HZP		0x00	/* hardware type for PA0HZP SCC card and compatible */
+#define EAGLE		0x01    /* hardware type for EAGLE card */
+#define PC100		0x02	/* hardware type for PC100 card */
+#define PRIMUS		0x04	/* hardware type for PRIMUS-PC (DG9BL) card */
+#define DRSI		0x08	/* hardware type for DRSI PC*Packet card */
+#define BAYCOM		0x10	/* hardware type for BayCom (U)SCC */
+
+/* DEV ioctl() commands */
+
+enum SCC_ioctl_cmds {
+	SIOCSCCRESERVED = SIOCDEVPRIVATE,
+	SIOCSCCCFG,
+	SIOCSCCINI,
+	SIOCSCCCHANINI,
+	SIOCSCCSMEM,
+	SIOCSCCGKISS,
+	SIOCSCCSKISS,
+	SIOCSCCGSTAT,
+	SIOCSCCCAL
+};
+
+/* Device parameter control (from WAMPES) */
+
+enum L1_params {
+	PARAM_DATA,
+	PARAM_TXDELAY,
+	PARAM_PERSIST,
+	PARAM_SLOTTIME,
+	PARAM_TXTAIL,
+	PARAM_FULLDUP,
+	PARAM_SOFTDCD,		/* was: PARAM_HW */
+	PARAM_MUTE,		/* ??? */
+	PARAM_DTR,
+	PARAM_RTS,
+	PARAM_SPEED,
+	PARAM_ENDDELAY,		/* ??? */
+	PARAM_GROUP,
+	PARAM_IDLE,
+	PARAM_MIN,
+	PARAM_MAXKEY,
+	PARAM_WAIT,
+	PARAM_MAXDEFER,
+	PARAM_TX,
+	PARAM_HWEVENT = 31,
+	PARAM_RETURN = 255	/* reset kiss mode */
+};
+
+/* fulldup parameter */
+
+enum FULLDUP_modes {
+	KISS_DUPLEX_HALF,	/* normal CSMA operation */
+	KISS_DUPLEX_FULL,	/* fullduplex, key down trx after transmission */
+	KISS_DUPLEX_LINK,	/* fullduplex, key down trx after 'idletime' sec */
+	KISS_DUPLEX_OPTIMA	/* fullduplex, let the protocol layer control the hw */
+};
+
+/* misc. parameters */
+
+#define TIMER_OFF	65535U	/* to switch off timers */
+#define NO_SUCH_PARAM	65534U	/* param not implemented */
+
+/* HWEVENT parameter */
+
+enum HWEVENT_opts {
+	HWEV_DCD_ON,
+	HWEV_DCD_OFF,
+	HWEV_ALL_SENT
+};
+
+/* channel grouping */
+
+#define RXGROUP		0100	/* if set, only tx when all channels clear */
+#define TXGROUP		0200	/* if set, don't transmit simultaneously */
+
+/* Tx/Rx clock sources */
+
+enum CLOCK_sources {
+	CLK_DPLL,	/* normal halfduplex operation */
+	CLK_EXTERNAL,	/* external clocking (G3RUH/DF9IC modems) */
+	CLK_DIVIDER,	/* Rx = DPLL, Tx = divider (fullduplex with */
+			/* modems without clock regeneration */
+	CLK_BRG		/* experimental fullduplex mode with DPLL/BRG for */
+			/* MODEMs without clock recovery */
+};
+
+/* Tx state */
+
+enum TX_state {
+	TXS_IDLE,	/* Transmitter off, no data pending */
+	TXS_BUSY,	/* waiting for permission to send / tailtime */
+	TXS_ACTIVE,	/* Transmitter on, sending data */
+	TXS_NEWFRAME,	/* reset CRC and send (next) frame */
+	TXS_IDLE2,	/* Transmitter on, no data pending */
+	TXS_WAIT,	/* Waiting for Mintime to expire */
+	TXS_TIMEOUT	/* We had a transmission timeout */
+};
+
+typedef unsigned long io_port;	/* type definition for an 'io port address' */
+
+/* SCC statistical information */
+
+struct scc_stat {
+        long rxints;            /* Receiver interrupts */
+        long txints;            /* Transmitter interrupts */
+        long exints;            /* External/status interrupts */
+        long spints;            /* Special receiver interrupts */
+
+        long txframes;          /* Packets sent */
+        long rxframes;          /* Number of Frames Actually Received */
+        long rxerrs;            /* CRC Errors */
+        long txerrs;		/* KISS errors */
+        
+	unsigned int nospace;	/* "Out of buffers" */
+	unsigned int rx_over;	/* Receiver Overruns */
+	unsigned int tx_under;	/* Transmitter Underruns */
+
+	unsigned int tx_state;	/* Transmitter state */
+	int tx_queued;		/* tx frames enqueued */
+
+	unsigned int maxqueue;	/* allocated tx_buffers */
+	unsigned int bufsize;	/* used buffersize */
+};
+
+struct scc_modem {
+	long speed;		/* Line speed, bps */
+	char clocksrc;		/* 0 = DPLL, 1 = external, 2 = divider */
+	char nrz;		/* NRZ instead of NRZI */	
+};
+
+struct scc_kiss_cmd {
+	int  	 command;	/* one of the KISS-Commands defined above */
+	unsigned param;		/* KISS-Param */
+};
+
+struct scc_hw_config {
+	io_port data_a;		/* data port channel A */
+	io_port ctrl_a;		/* control port channel A */
+	io_port data_b;		/* data port channel B */
+	io_port ctrl_b;		/* control port channel B */
+	io_port vector_latch;	/* INTACK-Latch (#) */
+	io_port	special;	/* special function port */
+
+	int	irq;		/* irq */
+	long	clock;		/* clock */
+	char	option;		/* command for function port */
+
+	char brand;		/* hardware type */
+	char escc;		/* use ext. features of a 8580/85180/85280 */
+};
+
+/* (#) only one INTACK latch allowed. */
+
+
+struct scc_mem_config {
+	unsigned int dummy;
+	unsigned int bufsize;
+};
+
+struct scc_calibrate {
+	unsigned int time;
+	unsigned char pattern;
+};
+
+#ifdef __KERNEL__
+
+enum {TX_OFF, TX_ON};	/* command for scc_key_trx() */
+
+/* Vector masks in RR2B */
+
+#define VECTOR_MASK	0x06
+#define TXINT		0x00
+#define EXINT		0x02
+#define RXINT		0x04
+#define SPINT		0x06
+
+#ifdef CONFIG_SCC_DELAY
+#define Inb(port)	inb_p(port)
+#define Outb(port, val)	outb_p(val, port)
+#else
+#define Inb(port)	inb(port)
+#define Outb(port, val)	outb(val, port)
+#endif
+
+/* SCC channel control structure for KISS */
+
+struct scc_kiss {
+	unsigned char txdelay;		/* Transmit Delay 10 ms/cnt */
+	unsigned char persist;		/* Persistence (0-255) as a % */
+	unsigned char slottime;		/* Delay to wait on persistence hit */
+	unsigned char tailtime;		/* Delay after last byte written */
+	unsigned char fulldup;		/* Full Duplex mode 0=CSMA 1=DUP 2=ALWAYS KEYED */
+	unsigned char waittime;		/* Waittime before any transmit attempt */
+	unsigned int  maxkeyup;		/* Maximum time to transmit (seconds) */
+	unsigned int  mintime;		/* Minimal offtime after MAXKEYUP timeout (seconds) */
+	unsigned int  idletime;		/* Maximum idle time in ALWAYS KEYED mode (seconds) */
+	unsigned int  maxdefer;		/* Timer for CSMA channel busy limit */
+	unsigned char tx_inhibit;	/* Transmit is not allowed when set */	
+	unsigned char group;		/* Group ID for AX.25 TX interlocking */
+	unsigned char mode;		/* 'normal' or 'hwctrl' mode (unused) */
+	unsigned char softdcd;		/* Use DPLL instead of DCD pin for carrier detect */
+};
+
+
+/* SCC channel structure */
+
+struct scc_channel {
+	int init;			/* channel exists? */
+
+	struct net_device *dev;		/* link to device control structure */
+	struct net_device_stats dev_stat;/* device statistics */
+
+	char brand;			/* manufacturer of the board */
+	long clock;			/* used clock */
+
+	io_port ctrl;			/* I/O address of CONTROL register */
+	io_port	data;			/* I/O address of DATA register */
+	io_port special;		/* I/O address of special function port */
+	int irq;			/* Number of Interrupt */
+
+	char option;
+	char enhanced;			/* Enhanced SCC support */
+
+	unsigned char wreg[16]; 	/* Copy of last written value in WRx */
+	unsigned char status;		/* Copy of R0 at last external interrupt */
+	unsigned char dcd;		/* DCD status */
+
+        struct scc_kiss kiss;		/* control structure for KISS params */
+        struct scc_stat stat;		/* statistical information */
+        struct scc_modem modem; 	/* modem information */
+
+        struct sk_buff_head tx_queue;	/* next tx buffer */
+        struct sk_buff *rx_buff;	/* pointer to frame currently received */
+        struct sk_buff *tx_buff;	/* pointer to frame currently transmitted */
+
+	/* Timer */
+	struct timer_list tx_t;		/* tx timer for this channel */
+	struct timer_list tx_wdog;	/* tx watchdogs */
+	
+	/* Channel lock */
+	spinlock_t	lock;		/* Channel guard lock */
+};
+
+#endif /* defined(__KERNEL__) */
+#endif /* defined(_SCC_H) */
diff --git a/include/linux/sched.h b/include/linux/sched.h
new file mode 100644
index 00000000..5fb37196
--- /dev/null
+++ b/include/linux/sched.h
@@ -0,0 +1,2826 @@
+#ifndef _LINUX_SCHED_H
+#define _LINUX_SCHED_H
+
+/*
+ * cloning flags:
+ */
+#define CSIGNAL		0x000000ff	/* signal mask to be sent at exit */
+#define CLONE_VM	0x00000100	/* set if VM shared between processes */
+#define CLONE_FS	0x00000200	/* set if fs info shared between processes */
+#define CLONE_FILES	0x00000400	/* set if open files shared between processes */
+#define CLONE_SIGHAND	0x00000800	/* set if signal handlers and blocked signals shared */
+#define CLONE_PTRACE	0x00002000	/* set if we want to let tracing continue on the child too */
+#define CLONE_VFORK	0x00004000	/* set if the parent wants the child to wake it up on mm_release */
+#define CLONE_PARENT	0x00008000	/* set if we want to have the same parent as the cloner */
+#define CLONE_THREAD	0x00010000	/* Same thread group? */
+#define CLONE_NEWNS	0x00020000	/* New namespace group? */
+#define CLONE_SYSVSEM	0x00040000	/* share system V SEM_UNDO semantics */
+#define CLONE_SETTLS	0x00080000	/* create a new TLS for the child */
+#define CLONE_PARENT_SETTID	0x00100000	/* set the TID in the parent */
+#define CLONE_CHILD_CLEARTID	0x00200000	/* clear the TID in the child */
+#define CLONE_DETACHED		0x00400000	/* Unused, ignored */
+#define CLONE_UNTRACED		0x00800000	/* set if the tracing process can't force CLONE_PTRACE on this clone */
+#define CLONE_CHILD_SETTID	0x01000000	/* set the TID in the child */
+/* 0x02000000 was previously the unused CLONE_STOPPED (Start in stopped state)
+   and is now available for re-use. */
+#define CLONE_NEWUTS		0x04000000	/* New utsname group? */
+#define CLONE_NEWIPC		0x08000000	/* New ipcs */
+#define CLONE_NEWUSER		0x10000000	/* New user namespace */
+#define CLONE_NEWPID		0x20000000	/* New pid namespace */
+#define CLONE_NEWNET		0x40000000	/* New network namespace */
+#define CLONE_IO		0x80000000	/* Clone io context */
+
+/*
+ * Scheduling policies
+ */
+#define SCHED_NORMAL		0
+#define SCHED_FIFO		1
+#define SCHED_RR		2
+#define SCHED_BATCH		3
+/* SCHED_ISO: reserved but not implemented yet */
+#define SCHED_IDLE		5
+/* Can be ORed in to make sure the process is reverted back to SCHED_NORMAL on fork */
+#define SCHED_RESET_ON_FORK     0x40000000
+
+#ifdef __KERNEL__
+
+struct sched_param {
+	int sched_priority;
+};
+
+#include <asm/param.h>	/* for HZ */
+
+#include <linux/capability.h>
+#include <linux/threads.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/timex.h>
+#include <linux/jiffies.h>
+#include <linux/rbtree.h>
+#include <linux/thread_info.h>
+#include <linux/cpumask.h>
+#include <linux/errno.h>
+#include <linux/nodemask.h>
+#include <linux/mm_types.h>
+
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include <asm/cputime.h>
+
+#include <linux/smp.h>
+#include <linux/sem.h>
+#include <linux/signal.h>
+#include <linux/compiler.h>
+#include <linux/completion.h>
+#include <linux/pid.h>
+#include <linux/percpu.h>
+#include <linux/topology.h>
+#include <linux/proportions.h>
+#include <linux/seccomp.h>
+#include <linux/rcupdate.h>
+#include <linux/rculist.h>
+#include <linux/rtmutex.h>
+
+#include <linux/time.h>
+#include <linux/param.h>
+#include <linux/resource.h>
+#include <linux/timer.h>
+#include <linux/hrtimer.h>
+#include <linux/task_io_accounting.h>
+#include <linux/latencytop.h>
+#include <linux/cred.h>
+#include <linux/llist.h>
+
+#include <asm/processor.h>
+
+struct exec_domain;
+struct futex_pi_state;
+struct robust_list_head;
+struct bio_list;
+struct fs_struct;
+struct perf_event_context;
+struct blk_plug;
+
+/*
+ * List of flags we want to share for kernel threads,
+ * if only because they are not used by them anyway.
+ */
+#define CLONE_KERNEL	(CLONE_FS | CLONE_FILES | CLONE_SIGHAND)
+
+/*
+ * These are the constant used to fake the fixed-point load-average
+ * counting. Some notes:
+ *  - 11 bit fractions expand to 22 bits by the multiplies: this gives
+ *    a load-average precision of 10 bits integer + 11 bits fractional
+ *  - if you want to count load-averages more often, you need more
+ *    precision, or rounding will get you. With 2-second counting freq,
+ *    the EXP_n values would be 1981, 2034 and 2043 if still using only
+ *    11 bit fractions.
+ */
+extern unsigned long avenrun[];		/* Load averages */
+extern void get_avenrun(unsigned long *loads, unsigned long offset, int shift);
+
+#define FSHIFT		11		/* nr of bits of precision */
+#define FIXED_1		(1<<FSHIFT)	/* 1.0 as fixed-point */
+#define LOAD_FREQ	(5*HZ+1)	/* 5 sec intervals */
+#define EXP_1		1884		/* 1/exp(5sec/1min) as fixed-point */
+#define EXP_5		2014		/* 1/exp(5sec/5min) */
+#define EXP_15		2037		/* 1/exp(5sec/15min) */
+
+#define CALC_LOAD(load,exp,n) \
+	load *= exp; \
+	load += n*(FIXED_1-exp); \
+	load >>= FSHIFT;
+
+extern unsigned long total_forks;
+extern int nr_threads;
+DECLARE_PER_CPU(unsigned long, process_counts);
+extern int nr_processes(void);
+extern unsigned long nr_running(void);
+extern unsigned long nr_uninterruptible(void);
+extern unsigned long nr_iowait(void);
+extern unsigned long nr_iowait_cpu(int cpu);
+extern unsigned long this_cpu_load(void);
+
+
+extern void calc_global_load(unsigned long ticks);
+
+extern unsigned long get_parent_ip(unsigned long addr);
+
+struct seq_file;
+struct cfs_rq;
+struct task_group;
+#ifdef CONFIG_SCHED_DEBUG
+extern void proc_sched_show_task(struct task_struct *p, struct seq_file *m);
+extern void proc_sched_set_task(struct task_struct *p);
+extern void
+print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq);
+#else
+static inline void
+proc_sched_show_task(struct task_struct *p, struct seq_file *m)
+{
+}
+static inline void proc_sched_set_task(struct task_struct *p)
+{
+}
+static inline void
+print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq)
+{
+}
+#endif
+
+/*
+ * Task state bitmask. NOTE! These bits are also
+ * encoded in fs/proc/array.c: get_task_state().
+ *
+ * We have two separate sets of flags: task->state
+ * is about runnability, while task->exit_state are
+ * about the task exiting. Confusing, but this way
+ * modifying one set can't modify the other one by
+ * mistake.
+ */
+#define TASK_RUNNING		0
+#define TASK_INTERRUPTIBLE	1
+#define TASK_UNINTERRUPTIBLE	2
+#define __TASK_STOPPED		4
+#define __TASK_TRACED		8
+/* in tsk->exit_state */
+#define EXIT_ZOMBIE		16
+#define EXIT_DEAD		32
+/* in tsk->state again */
+#define TASK_DEAD		64
+#define TASK_WAKEKILL		128
+#define TASK_WAKING		256
+#define TASK_STATE_MAX		512
+
+#define TASK_STATE_TO_CHAR_STR "RSDTtZXxKW"
+
+extern char ___assert_task_state[1 - 2*!!(
+		sizeof(TASK_STATE_TO_CHAR_STR)-1 != ilog2(TASK_STATE_MAX)+1)];
+
+/* Convenience macros for the sake of set_task_state */
+#define TASK_KILLABLE		(TASK_WAKEKILL | TASK_UNINTERRUPTIBLE)
+#define TASK_STOPPED		(TASK_WAKEKILL | __TASK_STOPPED)
+#define TASK_TRACED		(TASK_WAKEKILL | __TASK_TRACED)
+
+/* Convenience macros for the sake of wake_up */
+#define TASK_NORMAL		(TASK_INTERRUPTIBLE | TASK_UNINTERRUPTIBLE)
+#define TASK_ALL		(TASK_NORMAL | __TASK_STOPPED | __TASK_TRACED)
+
+/* get_task_state() */
+#define TASK_REPORT		(TASK_RUNNING | TASK_INTERRUPTIBLE | \
+				 TASK_UNINTERRUPTIBLE | __TASK_STOPPED | \
+				 __TASK_TRACED)
+
+#define task_is_traced(task)	((task->state & __TASK_TRACED) != 0)
+#define task_is_stopped(task)	((task->state & __TASK_STOPPED) != 0)
+#define task_is_dead(task)	((task)->exit_state != 0)
+#define task_is_stopped_or_traced(task)	\
+			((task->state & (__TASK_STOPPED | __TASK_TRACED)) != 0)
+#define task_contributes_to_load(task)	\
+				((task->state & TASK_UNINTERRUPTIBLE) != 0 && \
+				 (task->flags & PF_FROZEN) == 0)
+
+#define __set_task_state(tsk, state_value)		\
+	do { (tsk)->state = (state_value); } while (0)
+#define set_task_state(tsk, state_value)		\
+	set_mb((tsk)->state, (state_value))
+
+/*
+ * set_current_state() includes a barrier so that the write of current->state
+ * is correctly serialised wrt the caller's subsequent test of whether to
+ * actually sleep:
+ *
+ *	set_current_state(TASK_UNINTERRUPTIBLE);
+ *	if (do_i_need_to_sleep())
+ *		schedule();
+ *
+ * If the caller does not need such serialisation then use __set_current_state()
+ */
+#define __set_current_state(state_value)			\
+	do { current->state = (state_value); } while (0)
+#define set_current_state(state_value)		\
+	set_mb(current->state, (state_value))
+
+/* Task command name length */
+#define TASK_COMM_LEN 16
+
+#include <linux/spinlock.h>
+
+/*
+ * This serializes "schedule()" and also protects
+ * the run-queue from deletions/modifications (but
+ * _adding_ to the beginning of the run-queue has
+ * a separate lock).
+ */
+extern rwlock_t tasklist_lock;
+extern spinlock_t mmlist_lock;
+
+struct task_struct;
+
+#ifdef CONFIG_PROVE_RCU
+extern int lockdep_tasklist_lock_is_held(void);
+#endif /* #ifdef CONFIG_PROVE_RCU */
+
+extern void sched_init(void);
+extern void sched_init_smp(void);
+extern asmlinkage void schedule_tail(struct task_struct *prev);
+extern void init_idle(struct task_struct *idle, int cpu);
+extern void init_idle_bootup_task(struct task_struct *idle);
+
+extern int runqueue_is_locked(int cpu);
+
+#if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ)
+extern void select_nohz_load_balancer(int stop_tick);
+extern void set_cpu_sd_state_idle(void);
+extern int get_nohz_timer_target(void);
+#else
+static inline void select_nohz_load_balancer(int stop_tick) { }
+static inline void set_cpu_sd_state_idle(void) { }
+#endif
+
+/*
+ * Only dump TASK_* tasks. (0 for all tasks)
+ */
+extern void show_state_filter(unsigned long state_filter);
+
+static inline void show_state(void)
+{
+	show_state_filter(0);
+}
+
+extern void show_regs(struct pt_regs *);
+
+/*
+ * TASK is a pointer to the task whose backtrace we want to see (or NULL for current
+ * task), SP is the stack pointer of the first frame that should be shown in the back
+ * trace (or NULL if the entire call-chain of the task should be shown).
+ */
+extern void show_stack(struct task_struct *task, unsigned long *sp);
+
+void io_schedule(void);
+long io_schedule_timeout(long timeout);
+
+extern void cpu_init (void);
+extern void trap_init(void);
+extern void update_process_times(int user);
+extern void scheduler_tick(void);
+
+extern void sched_show_task(struct task_struct *p);
+
+#ifdef CONFIG_LOCKUP_DETECTOR
+extern void touch_softlockup_watchdog(void);
+extern void touch_softlockup_watchdog_sync(void);
+extern void touch_all_softlockup_watchdogs(void);
+extern int proc_dowatchdog_thresh(struct ctl_table *table, int write,
+				  void __user *buffer,
+				  size_t *lenp, loff_t *ppos);
+extern unsigned int  softlockup_panic;
+void lockup_detector_init(void);
+#else
+static inline void touch_softlockup_watchdog(void)
+{
+}
+static inline void touch_softlockup_watchdog_sync(void)
+{
+}
+static inline void touch_all_softlockup_watchdogs(void)
+{
+}
+static inline void lockup_detector_init(void)
+{
+}
+#endif
+
+#ifdef CONFIG_DETECT_HUNG_TASK
+extern unsigned int  sysctl_hung_task_panic;
+extern unsigned long sysctl_hung_task_check_count;
+extern unsigned long sysctl_hung_task_timeout_secs;
+extern unsigned long sysctl_hung_task_warnings;
+extern int proc_dohung_task_timeout_secs(struct ctl_table *table, int write,
+					 void __user *buffer,
+					 size_t *lenp, loff_t *ppos);
+#else
+/* Avoid need for ifdefs elsewhere in the code */
+enum { sysctl_hung_task_timeout_secs = 0 };
+#endif
+
+/* Attach to any functions which should be ignored in wchan output. */
+#define __sched		__attribute__((__section__(".sched.text")))
+
+/* Linker adds these: start and end of __sched functions */
+extern char __sched_text_start[], __sched_text_end[];
+
+/* Is this address in the __sched functions? */
+extern int in_sched_functions(unsigned long addr);
+
+#define	MAX_SCHEDULE_TIMEOUT	LONG_MAX
+extern signed long schedule_timeout(signed long timeout);
+extern signed long schedule_timeout_interruptible(signed long timeout);
+extern signed long schedule_timeout_killable(signed long timeout);
+extern signed long schedule_timeout_uninterruptible(signed long timeout);
+asmlinkage void schedule(void);
+extern void schedule_preempt_disabled(void);
+extern int mutex_spin_on_owner(struct mutex *lock, struct task_struct *owner);
+
+struct nsproxy;
+struct user_namespace;
+
+/*
+ * Default maximum number of active map areas, this limits the number of vmas
+ * per mm struct. Users can overwrite this number by sysctl but there is a
+ * problem.
+ *
+ * When a program's coredump is generated as ELF format, a section is created
+ * per a vma. In ELF, the number of sections is represented in unsigned short.
+ * This means the number of sections should be smaller than 65535 at coredump.
+ * Because the kernel adds some informative sections to a image of program at
+ * generating coredump, we need some margin. The number of extra sections is
+ * 1-3 now and depends on arch. We use "5" as safe margin, here.
+ */
+#define MAPCOUNT_ELF_CORE_MARGIN	(5)
+#define DEFAULT_MAX_MAP_COUNT	(USHRT_MAX - MAPCOUNT_ELF_CORE_MARGIN)
+
+extern int sysctl_max_map_count;
+
+#include <linux/aio.h>
+
+#ifdef CONFIG_MMU
+extern void arch_pick_mmap_layout(struct mm_struct *mm);
+extern unsigned long
+arch_get_unmapped_area(struct file *, unsigned long, unsigned long,
+		       unsigned long, unsigned long);
+extern unsigned long
+arch_get_unmapped_area_topdown(struct file *filp, unsigned long addr,
+			  unsigned long len, unsigned long pgoff,
+			  unsigned long flags);
+extern void arch_unmap_area(struct mm_struct *, unsigned long);
+extern void arch_unmap_area_topdown(struct mm_struct *, unsigned long);
+#else
+static inline void arch_pick_mmap_layout(struct mm_struct *mm) {}
+#endif
+
+
+extern void set_dumpable(struct mm_struct *mm, int value);
+extern int get_dumpable(struct mm_struct *mm);
+
+/* mm flags */
+/* dumpable bits */
+#define MMF_DUMPABLE      0  /* core dump is permitted */
+#define MMF_DUMP_SECURELY 1  /* core file is readable only by root */
+
+#define MMF_DUMPABLE_BITS 2
+#define MMF_DUMPABLE_MASK ((1 << MMF_DUMPABLE_BITS) - 1)
+
+/* coredump filter bits */
+#define MMF_DUMP_ANON_PRIVATE	2
+#define MMF_DUMP_ANON_SHARED	3
+#define MMF_DUMP_MAPPED_PRIVATE	4
+#define MMF_DUMP_MAPPED_SHARED	5
+#define MMF_DUMP_ELF_HEADERS	6
+#define MMF_DUMP_HUGETLB_PRIVATE 7
+#define MMF_DUMP_HUGETLB_SHARED  8
+
+#define MMF_DUMP_FILTER_SHIFT	MMF_DUMPABLE_BITS
+#define MMF_DUMP_FILTER_BITS	7
+#define MMF_DUMP_FILTER_MASK \
+	(((1 << MMF_DUMP_FILTER_BITS) - 1) << MMF_DUMP_FILTER_SHIFT)
+#define MMF_DUMP_FILTER_DEFAULT \
+	((1 << MMF_DUMP_ANON_PRIVATE) |	(1 << MMF_DUMP_ANON_SHARED) |\
+	 (1 << MMF_DUMP_HUGETLB_PRIVATE) | MMF_DUMP_MASK_DEFAULT_ELF)
+
+#ifdef CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS
+# define MMF_DUMP_MASK_DEFAULT_ELF	(1 << MMF_DUMP_ELF_HEADERS)
+#else
+# define MMF_DUMP_MASK_DEFAULT_ELF	0
+#endif
+					/* leave room for more dump flags */
+#define MMF_VM_MERGEABLE	16	/* KSM may merge identical pages */
+#define MMF_VM_HUGEPAGE		17	/* set when VM_HUGEPAGE is set on vma */
+
+#define MMF_INIT_MASK		(MMF_DUMPABLE_MASK | MMF_DUMP_FILTER_MASK)
+
+struct sighand_struct {
+	atomic_t		count;
+	struct k_sigaction	action[_NSIG];
+	spinlock_t		siglock;
+	wait_queue_head_t	signalfd_wqh;
+};
+
+struct pacct_struct {
+	int			ac_flag;
+	long			ac_exitcode;
+	unsigned long		ac_mem;
+	cputime_t		ac_utime, ac_stime;
+	unsigned long		ac_minflt, ac_majflt;
+};
+
+struct cpu_itimer {
+	cputime_t expires;
+	cputime_t incr;
+	u32 error;
+	u32 incr_error;
+};
+
+/**
+ * struct task_cputime - collected CPU time counts
+ * @utime:		time spent in user mode, in &cputime_t units
+ * @stime:		time spent in kernel mode, in &cputime_t units
+ * @sum_exec_runtime:	total time spent on the CPU, in nanoseconds
+ *
+ * This structure groups together three kinds of CPU time that are
+ * tracked for threads and thread groups.  Most things considering
+ * CPU time want to group these counts together and treat all three
+ * of them in parallel.
+ */
+struct task_cputime {
+	cputime_t utime;
+	cputime_t stime;
+	unsigned long long sum_exec_runtime;
+};
+/* Alternate field names when used to cache expirations. */
+#define prof_exp	stime
+#define virt_exp	utime
+#define sched_exp	sum_exec_runtime
+
+#define INIT_CPUTIME	\
+	(struct task_cputime) {					\
+		.utime = 0,					\
+		.stime = 0,					\
+		.sum_exec_runtime = 0,				\
+	}
+
+/*
+ * Disable preemption until the scheduler is running.
+ * Reset by start_kernel()->sched_init()->init_idle().
+ *
+ * We include PREEMPT_ACTIVE to avoid cond_resched() from working
+ * before the scheduler is active -- see should_resched().
+ */
+#define INIT_PREEMPT_COUNT	(1 + PREEMPT_ACTIVE)
+
+/**
+ * struct thread_group_cputimer - thread group interval timer counts
+ * @cputime:		thread group interval timers.
+ * @running:		non-zero when there are timers running and
+ * 			@cputime receives updates.
+ * @lock:		lock for fields in this struct.
+ *
+ * This structure contains the version of task_cputime, above, that is
+ * used for thread group CPU timer calculations.
+ */
+struct thread_group_cputimer {
+	struct task_cputime cputime;
+	int running;
+	raw_spinlock_t lock;
+};
+
+#include <linux/rwsem.h>
+struct autogroup;
+
+/*
+ * NOTE! "signal_struct" does not have its own
+ * locking, because a shared signal_struct always
+ * implies a shared sighand_struct, so locking
+ * sighand_struct is always a proper superset of
+ * the locking of signal_struct.
+ */
+struct signal_struct {
+	atomic_t		sigcnt;
+	atomic_t		live;
+	int			nr_threads;
+
+	wait_queue_head_t	wait_chldexit;	/* for wait4() */
+
+	/* current thread group signal load-balancing target: */
+	struct task_struct	*curr_target;
+
+	/* shared signal handling: */
+	struct sigpending	shared_pending;
+
+	/* thread group exit support */
+	int			group_exit_code;
+	/* overloaded:
+	 * - notify group_exit_task when ->count is equal to notify_count
+	 * - everyone except group_exit_task is stopped during signal delivery
+	 *   of fatal signals, group_exit_task processes the signal.
+	 */
+	int			notify_count;
+	struct task_struct	*group_exit_task;
+
+	/* thread group stop support, overloads group_exit_code too */
+	int			group_stop_count;
+	unsigned int		flags; /* see SIGNAL_* flags below */
+
+	/*
+	 * PR_SET_CHILD_SUBREAPER marks a process, like a service
+	 * manager, to re-parent orphan (double-forking) child processes
+	 * to this process instead of 'init'. The service manager is
+	 * able to receive SIGCHLD signals and is able to investigate
+	 * the process until it calls wait(). All children of this
+	 * process will inherit a flag if they should look for a
+	 * child_subreaper process at exit.
+	 */
+	unsigned int		is_child_subreaper:1;
+	unsigned int		has_child_subreaper:1;
+
+	/* POSIX.1b Interval Timers */
+	struct list_head posix_timers;
+
+	/* ITIMER_REAL timer for the process */
+	struct hrtimer real_timer;
+	struct pid *leader_pid;
+	ktime_t it_real_incr;
+
+	/*
+	 * ITIMER_PROF and ITIMER_VIRTUAL timers for the process, we use
+	 * CPUCLOCK_PROF and CPUCLOCK_VIRT for indexing array as these
+	 * values are defined to 0 and 1 respectively
+	 */
+	struct cpu_itimer it[2];
+
+	/*
+	 * Thread group totals for process CPU timers.
+	 * See thread_group_cputimer(), et al, for details.
+	 */
+	struct thread_group_cputimer cputimer;
+
+	/* Earliest-expiration cache. */
+	struct task_cputime cputime_expires;
+
+	struct list_head cpu_timers[3];
+
+	struct pid *tty_old_pgrp;
+
+	/* boolean value for session group leader */
+	int leader;
+
+	struct tty_struct *tty; /* NULL if no tty */
+
+#ifdef CONFIG_SCHED_AUTOGROUP
+	struct autogroup *autogroup;
+#endif
+	/*
+	 * Cumulative resource counters for dead threads in the group,
+	 * and for reaped dead child processes forked by this group.
+	 * Live threads maintain their own counters and add to these
+	 * in __exit_signal, except for the group leader.
+	 */
+	cputime_t utime, stime, cutime, cstime;
+	cputime_t gtime;
+	cputime_t cgtime;
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING
+	cputime_t prev_utime, prev_stime;
+#endif
+	unsigned long nvcsw, nivcsw, cnvcsw, cnivcsw;
+	unsigned long min_flt, maj_flt, cmin_flt, cmaj_flt;
+	unsigned long inblock, oublock, cinblock, coublock;
+	unsigned long maxrss, cmaxrss;
+	struct task_io_accounting ioac;
+
+	/*
+	 * Cumulative ns of schedule CPU time fo dead threads in the
+	 * group, not including a zombie group leader, (This only differs
+	 * from jiffies_to_ns(utime + stime) if sched_clock uses something
+	 * other than jiffies.)
+	 */
+	unsigned long long sum_sched_runtime;
+
+	/*
+	 * We don't bother to synchronize most readers of this at all,
+	 * because there is no reader checking a limit that actually needs
+	 * to get both rlim_cur and rlim_max atomically, and either one
+	 * alone is a single word that can safely be read normally.
+	 * getrlimit/setrlimit use task_lock(current->group_leader) to
+	 * protect this instead of the siglock, because they really
+	 * have no need to disable irqs.
+	 */
+	struct rlimit rlim[RLIM_NLIMITS];
+
+#ifdef CONFIG_BSD_PROCESS_ACCT
+	struct pacct_struct pacct;	/* per-process accounting information */
+#endif
+#ifdef CONFIG_TASKSTATS
+	struct taskstats *stats;
+#endif
+#ifdef CONFIG_AUDIT
+	unsigned audit_tty;
+	struct tty_audit_buf *tty_audit_buf;
+#endif
+#ifdef CONFIG_CGROUPS
+	/*
+	 * group_rwsem prevents new tasks from entering the threadgroup and
+	 * member tasks from exiting,a more specifically, setting of
+	 * PF_EXITING.  fork and exit paths are protected with this rwsem
+	 * using threadgroup_change_begin/end().  Users which require
+	 * threadgroup to remain stable should use threadgroup_[un]lock()
+	 * which also takes care of exec path.  Currently, cgroup is the
+	 * only user.
+	 */
+	struct rw_semaphore group_rwsem;
+#endif
+
+	int oom_adj;		/* OOM kill score adjustment (bit shift) */
+	int oom_score_adj;	/* OOM kill score adjustment */
+	int oom_score_adj_min;	/* OOM kill score adjustment minimum value.
+				 * Only settable by CAP_SYS_RESOURCE. */
+
+	struct mutex cred_guard_mutex;	/* guard against foreign influences on
+					 * credential calculations
+					 * (notably. ptrace) */
+};
+
+/* Context switch must be unlocked if interrupts are to be enabled */
+#ifdef __ARCH_WANT_INTERRUPTS_ON_CTXSW
+# define __ARCH_WANT_UNLOCKED_CTXSW
+#endif
+
+/*
+ * Bits in flags field of signal_struct.
+ */
+#define SIGNAL_STOP_STOPPED	0x00000001 /* job control stop in effect */
+#define SIGNAL_STOP_CONTINUED	0x00000002 /* SIGCONT since WCONTINUED reap */
+#define SIGNAL_GROUP_EXIT	0x00000004 /* group exit in progress */
+/*
+ * Pending notifications to parent.
+ */
+#define SIGNAL_CLD_STOPPED	0x00000010
+#define SIGNAL_CLD_CONTINUED	0x00000020
+#define SIGNAL_CLD_MASK		(SIGNAL_CLD_STOPPED|SIGNAL_CLD_CONTINUED)
+
+#define SIGNAL_UNKILLABLE	0x00000040 /* for init: ignore fatal signals */
+
+/* If true, all threads except ->group_exit_task have pending SIGKILL */
+static inline int signal_group_exit(const struct signal_struct *sig)
+{
+	return	(sig->flags & SIGNAL_GROUP_EXIT) ||
+		(sig->group_exit_task != NULL);
+}
+
+/*
+ * Some day this will be a full-fledged user tracking system..
+ */
+struct user_struct {
+	atomic_t __count;	/* reference count */
+	atomic_t processes;	/* How many processes does this user have? */
+	atomic_t files;		/* How many open files does this user have? */
+	atomic_t sigpending;	/* How many pending signals does this user have? */
+#ifdef CONFIG_INOTIFY_USER
+	atomic_t inotify_watches; /* How many inotify watches does this user have? */
+	atomic_t inotify_devs;	/* How many inotify devs does this user have opened? */
+#endif
+#ifdef CONFIG_FANOTIFY
+	atomic_t fanotify_listeners;
+#endif
+#ifdef CONFIG_EPOLL
+	atomic_long_t epoll_watches; /* The number of file descriptors currently watched */
+#endif
+#ifdef CONFIG_POSIX_MQUEUE
+	/* protected by mq_lock	*/
+	unsigned long mq_bytes;	/* How many bytes can be allocated to mqueue? */
+#endif
+	unsigned long locked_shm; /* How many pages of mlocked shm ? */
+
+#ifdef CONFIG_KEYS
+	struct key *uid_keyring;	/* UID specific keyring */
+	struct key *session_keyring;	/* UID's default session keyring */
+#endif
+
+	/* Hash table maintenance information */
+	struct hlist_node uidhash_node;
+	uid_t uid;
+	struct user_namespace *user_ns;
+
+#ifdef CONFIG_PERF_EVENTS
+	atomic_long_t locked_vm;
+#endif
+};
+
+extern int uids_sysfs_init(void);
+
+extern struct user_struct *find_user(uid_t);
+
+extern struct user_struct root_user;
+#define INIT_USER (&root_user)
+
+
+struct backing_dev_info;
+struct reclaim_state;
+
+#if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
+struct sched_info {
+	/* cumulative counters */
+	unsigned long pcount;	      /* # of times run on this cpu */
+	unsigned long long run_delay; /* time spent waiting on a runqueue */
+
+	/* timestamps */
+	unsigned long long last_arrival,/* when we last ran on a cpu */
+			   last_queued;	/* when we were last queued to run */
+};
+#endif /* defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT) */
+
+#ifdef CONFIG_TASK_DELAY_ACCT
+struct task_delay_info {
+	spinlock_t	lock;
+	unsigned int	flags;	/* Private per-task flags */
+
+	/* For each stat XXX, add following, aligned appropriately
+	 *
+	 * struct timespec XXX_start, XXX_end;
+	 * u64 XXX_delay;
+	 * u32 XXX_count;
+	 *
+	 * Atomicity of updates to XXX_delay, XXX_count protected by
+	 * single lock above (split into XXX_lock if contention is an issue).
+	 */
+
+	/*
+	 * XXX_count is incremented on every XXX operation, the delay
+	 * associated with the operation is added to XXX_delay.
+	 * XXX_delay contains the accumulated delay time in nanoseconds.
+	 */
+	struct timespec blkio_start, blkio_end;	/* Shared by blkio, swapin */
+	u64 blkio_delay;	/* wait for sync block io completion */
+	u64 swapin_delay;	/* wait for swapin block io completion */
+	u32 blkio_count;	/* total count of the number of sync block */
+				/* io operations performed */
+	u32 swapin_count;	/* total count of the number of swapin block */
+				/* io operations performed */
+
+	struct timespec freepages_start, freepages_end;
+	u64 freepages_delay;	/* wait for memory reclaim */
+	u32 freepages_count;	/* total count of memory reclaim */
+};
+#endif	/* CONFIG_TASK_DELAY_ACCT */
+
+static inline int sched_info_on(void)
+{
+#ifdef CONFIG_SCHEDSTATS
+	return 1;
+#elif defined(CONFIG_TASK_DELAY_ACCT)
+	extern int delayacct_on;
+	return delayacct_on;
+#else
+	return 0;
+#endif
+}
+
+enum cpu_idle_type {
+	CPU_IDLE,
+	CPU_NOT_IDLE,
+	CPU_NEWLY_IDLE,
+	CPU_MAX_IDLE_TYPES
+};
+
+/*
+ * Increase resolution of nice-level calculations for 64-bit architectures.
+ * The extra resolution improves shares distribution and load balancing of
+ * low-weight task groups (eg. nice +19 on an autogroup), deeper taskgroup
+ * hierarchies, especially on larger systems. This is not a user-visible change
+ * and does not change the user-interface for setting shares/weights.
+ *
+ * We increase resolution only if we have enough bits to allow this increased
+ * resolution (i.e. BITS_PER_LONG > 32). The costs for increasing resolution
+ * when BITS_PER_LONG <= 32 are pretty high and the returns do not justify the
+ * increased costs.
+ */
+#if 0 /* BITS_PER_LONG > 32 -- currently broken: it increases power usage under light load  */
+# define SCHED_LOAD_RESOLUTION	10
+# define scale_load(w)		((w) << SCHED_LOAD_RESOLUTION)
+# define scale_load_down(w)	((w) >> SCHED_LOAD_RESOLUTION)
+#else
+# define SCHED_LOAD_RESOLUTION	0
+# define scale_load(w)		(w)
+# define scale_load_down(w)	(w)
+#endif
+
+#define SCHED_LOAD_SHIFT	(10 + SCHED_LOAD_RESOLUTION)
+#define SCHED_LOAD_SCALE	(1L << SCHED_LOAD_SHIFT)
+
+/*
+ * Increase resolution of cpu_power calculations
+ */
+#define SCHED_POWER_SHIFT	10
+#define SCHED_POWER_SCALE	(1L << SCHED_POWER_SHIFT)
+
+/*
+ * sched-domains (multiprocessor balancing) declarations:
+ */
+#ifdef CONFIG_SMP
+#define SD_LOAD_BALANCE		0x0001	/* Do load balancing on this domain. */
+#define SD_BALANCE_NEWIDLE	0x0002	/* Balance when about to become idle */
+#define SD_BALANCE_EXEC		0x0004	/* Balance on exec */
+#define SD_BALANCE_FORK		0x0008	/* Balance on fork, clone */
+#define SD_BALANCE_WAKE		0x0010  /* Balance on wakeup */
+#define SD_WAKE_AFFINE		0x0020	/* Wake task to waking CPU */
+#define SD_PREFER_LOCAL		0x0040  /* Prefer to keep tasks local to this domain */
+#define SD_SHARE_CPUPOWER	0x0080	/* Domain members share cpu power */
+#define SD_POWERSAVINGS_BALANCE	0x0100	/* Balance for power savings */
+#define SD_SHARE_PKG_RESOURCES	0x0200	/* Domain members share cpu pkg resources */
+#define SD_SERIALIZE		0x0400	/* Only a single load balancing instance */
+#define SD_ASYM_PACKING		0x0800  /* Place busy groups earlier in the domain */
+#define SD_PREFER_SIBLING	0x1000	/* Prefer to place tasks in a sibling domain */
+#define SD_OVERLAP		0x2000	/* sched_domains of this level overlap */
+
+enum powersavings_balance_level {
+	POWERSAVINGS_BALANCE_NONE = 0,  /* No power saving load balance */
+	POWERSAVINGS_BALANCE_BASIC,	/* Fill one thread/core/package
+					 * first for long running threads
+					 */
+	POWERSAVINGS_BALANCE_WAKEUP,	/* Also bias task wakeups to semi-idle
+					 * cpu package for power savings
+					 */
+	MAX_POWERSAVINGS_BALANCE_LEVELS
+};
+
+extern int sched_mc_power_savings, sched_smt_power_savings;
+
+static inline int sd_balance_for_mc_power(void)
+{
+	if (sched_smt_power_savings)
+		return SD_POWERSAVINGS_BALANCE;
+
+	if (!sched_mc_power_savings)
+		return SD_PREFER_SIBLING;
+
+	return 0;
+}
+
+static inline int sd_balance_for_package_power(void)
+{
+	if (sched_mc_power_savings | sched_smt_power_savings)
+		return SD_POWERSAVINGS_BALANCE;
+
+	return SD_PREFER_SIBLING;
+}
+
+extern int __weak arch_sd_sibiling_asym_packing(void);
+
+/*
+ * Optimise SD flags for power savings:
+ * SD_BALANCE_NEWIDLE helps aggressive task consolidation and power savings.
+ * Keep default SD flags if sched_{smt,mc}_power_saving=0
+ */
+
+static inline int sd_power_saving_flags(void)
+{
+	if (sched_mc_power_savings | sched_smt_power_savings)
+		return SD_BALANCE_NEWIDLE;
+
+	return 0;
+}
+
+struct sched_group_power {
+	atomic_t ref;
+	/*
+	 * CPU power of this group, SCHED_LOAD_SCALE being max power for a
+	 * single CPU.
+	 */
+	unsigned int power, power_orig;
+	unsigned long next_update;
+	/*
+	 * Number of busy cpus in this group.
+	 */
+	atomic_t nr_busy_cpus;
+};
+
+struct sched_group {
+	struct sched_group *next;	/* Must be a circular list */
+	atomic_t ref;
+
+	unsigned int group_weight;
+	struct sched_group_power *sgp;
+
+	/*
+	 * The CPUs this group covers.
+	 *
+	 * NOTE: this field is variable length. (Allocated dynamically
+	 * by attaching extra space to the end of the structure,
+	 * depending on how many CPUs the kernel has booted up with)
+	 */
+	unsigned long cpumask[0];
+};
+
+static inline struct cpumask *sched_group_cpus(struct sched_group *sg)
+{
+	return to_cpumask(sg->cpumask);
+}
+
+/**
+ * group_first_cpu - Returns the first cpu in the cpumask of a sched_group.
+ * @group: The group whose first cpu is to be returned.
+ */
+static inline unsigned int group_first_cpu(struct sched_group *group)
+{
+	return cpumask_first(sched_group_cpus(group));
+}
+
+struct sched_domain_attr {
+	int relax_domain_level;
+};
+
+#define SD_ATTR_INIT	(struct sched_domain_attr) {	\
+	.relax_domain_level = -1,			\
+}
+
+extern int sched_domain_level_max;
+
+struct sched_domain {
+	/* These fields must be setup */
+	struct sched_domain *parent;	/* top domain must be null terminated */
+	struct sched_domain *child;	/* bottom domain must be null terminated */
+	struct sched_group *groups;	/* the balancing groups of the domain */
+	unsigned long min_interval;	/* Minimum balance interval ms */
+	unsigned long max_interval;	/* Maximum balance interval ms */
+	unsigned int busy_factor;	/* less balancing by factor if busy */
+	unsigned int imbalance_pct;	/* No balance until over watermark */
+	unsigned int cache_nice_tries;	/* Leave cache hot tasks for # tries */
+	unsigned int busy_idx;
+	unsigned int idle_idx;
+	unsigned int newidle_idx;
+	unsigned int wake_idx;
+	unsigned int forkexec_idx;
+	unsigned int smt_gain;
+	int flags;			/* See SD_* */
+	int level;
+
+	/* Runtime fields. */
+	unsigned long last_balance;	/* init to jiffies. units in jiffies */
+	unsigned int balance_interval;	/* initialise to 1. units in ms. */
+	unsigned int nr_balance_failed; /* initialise to 0 */
+
+	u64 last_update;
+
+#ifdef CONFIG_SCHEDSTATS
+	/* load_balance() stats */
+	unsigned int lb_count[CPU_MAX_IDLE_TYPES];
+	unsigned int lb_failed[CPU_MAX_IDLE_TYPES];
+	unsigned int lb_balanced[CPU_MAX_IDLE_TYPES];
+	unsigned int lb_imbalance[CPU_MAX_IDLE_TYPES];
+	unsigned int lb_gained[CPU_MAX_IDLE_TYPES];
+	unsigned int lb_hot_gained[CPU_MAX_IDLE_TYPES];
+	unsigned int lb_nobusyg[CPU_MAX_IDLE_TYPES];
+	unsigned int lb_nobusyq[CPU_MAX_IDLE_TYPES];
+
+	/* Active load balancing */
+	unsigned int alb_count;
+	unsigned int alb_failed;
+	unsigned int alb_pushed;
+
+	/* SD_BALANCE_EXEC stats */
+	unsigned int sbe_count;
+	unsigned int sbe_balanced;
+	unsigned int sbe_pushed;
+
+	/* SD_BALANCE_FORK stats */
+	unsigned int sbf_count;
+	unsigned int sbf_balanced;
+	unsigned int sbf_pushed;
+
+	/* try_to_wake_up() stats */
+	unsigned int ttwu_wake_remote;
+	unsigned int ttwu_move_affine;
+	unsigned int ttwu_move_balance;
+#endif
+#ifdef CONFIG_SCHED_DEBUG
+	char *name;
+#endif
+	union {
+		void *private;		/* used during construction */
+		struct rcu_head rcu;	/* used during destruction */
+	};
+
+	unsigned int span_weight;
+	/*
+	 * Span of all CPUs in this domain.
+	 *
+	 * NOTE: this field is variable length. (Allocated dynamically
+	 * by attaching extra space to the end of the structure,
+	 * depending on how many CPUs the kernel has booted up with)
+	 */
+	unsigned long span[0];
+};
+
+static inline struct cpumask *sched_domain_span(struct sched_domain *sd)
+{
+	return to_cpumask(sd->span);
+}
+
+extern void partition_sched_domains(int ndoms_new, cpumask_var_t doms_new[],
+				    struct sched_domain_attr *dattr_new);
+
+/* Allocate an array of sched domains, for partition_sched_domains(). */
+cpumask_var_t *alloc_sched_domains(unsigned int ndoms);
+void free_sched_domains(cpumask_var_t doms[], unsigned int ndoms);
+
+/* Test a flag in parent sched domain */
+static inline int test_sd_parent(struct sched_domain *sd, int flag)
+{
+	if (sd->parent && (sd->parent->flags & flag))
+		return 1;
+
+	return 0;
+}
+
+unsigned long default_scale_freq_power(struct sched_domain *sd, int cpu);
+unsigned long default_scale_smt_power(struct sched_domain *sd, int cpu);
+
+bool cpus_share_cache(int this_cpu, int that_cpu);
+
+#else /* CONFIG_SMP */
+
+struct sched_domain_attr;
+
+static inline void
+partition_sched_domains(int ndoms_new, cpumask_var_t doms_new[],
+			struct sched_domain_attr *dattr_new)
+{
+}
+
+static inline bool cpus_share_cache(int this_cpu, int that_cpu)
+{
+	return true;
+}
+
+#endif	/* !CONFIG_SMP */
+
+
+struct io_context;			/* See blkdev.h */
+
+
+#ifdef ARCH_HAS_PREFETCH_SWITCH_STACK
+extern void prefetch_stack(struct task_struct *t);
+#else
+static inline void prefetch_stack(struct task_struct *t) { }
+#endif
+
+struct audit_context;		/* See audit.c */
+struct mempolicy;
+struct pipe_inode_info;
+struct uts_namespace;
+
+struct rq;
+struct sched_domain;
+
+/*
+ * wake flags
+ */
+#define WF_SYNC		0x01		/* waker goes to sleep after wakup */
+#define WF_FORK		0x02		/* child wakeup after fork */
+#define WF_MIGRATED	0x04		/* internal use, task got migrated */
+
+#define ENQUEUE_WAKEUP		1
+#define ENQUEUE_HEAD		2
+#ifdef CONFIG_SMP
+#define ENQUEUE_WAKING		4	/* sched_class::task_waking was called */
+#else
+#define ENQUEUE_WAKING		0
+#endif
+
+#define DEQUEUE_SLEEP		1
+
+struct sched_class {
+	const struct sched_class *next;
+
+	void (*enqueue_task) (struct rq *rq, struct task_struct *p, int flags);
+	void (*dequeue_task) (struct rq *rq, struct task_struct *p, int flags);
+	void (*yield_task) (struct rq *rq);
+	bool (*yield_to_task) (struct rq *rq, struct task_struct *p, bool preempt);
+
+	void (*check_preempt_curr) (struct rq *rq, struct task_struct *p, int flags);
+
+	struct task_struct * (*pick_next_task) (struct rq *rq);
+	void (*put_prev_task) (struct rq *rq, struct task_struct *p);
+
+#ifdef CONFIG_SMP
+	int  (*select_task_rq)(struct task_struct *p, int sd_flag, int flags);
+
+	void (*pre_schedule) (struct rq *this_rq, struct task_struct *task);
+	void (*post_schedule) (struct rq *this_rq);
+	void (*task_waking) (struct task_struct *task);
+	void (*task_woken) (struct rq *this_rq, struct task_struct *task);
+
+	void (*set_cpus_allowed)(struct task_struct *p,
+				 const struct cpumask *newmask);
+
+	void (*rq_online)(struct rq *rq);
+	void (*rq_offline)(struct rq *rq);
+#endif
+
+	void (*set_curr_task) (struct rq *rq);
+	void (*task_tick) (struct rq *rq, struct task_struct *p, int queued);
+	void (*task_fork) (struct task_struct *p);
+
+	void (*switched_from) (struct rq *this_rq, struct task_struct *task);
+	void (*switched_to) (struct rq *this_rq, struct task_struct *task);
+	void (*prio_changed) (struct rq *this_rq, struct task_struct *task,
+			     int oldprio);
+
+	unsigned int (*get_rr_interval) (struct rq *rq,
+					 struct task_struct *task);
+
+#ifdef CONFIG_FAIR_GROUP_SCHED
+	void (*task_move_group) (struct task_struct *p, int on_rq);
+#endif
+};
+
+struct load_weight {
+	unsigned long weight, inv_weight;
+};
+
+#ifdef CONFIG_SCHEDSTATS
+struct sched_statistics {
+	u64			wait_start;
+	u64			wait_max;
+	u64			wait_count;
+	u64			wait_sum;
+	u64			iowait_count;
+	u64			iowait_sum;
+
+	u64			sleep_start;
+	u64			sleep_max;
+	s64			sum_sleep_runtime;
+
+	u64			block_start;
+	u64			block_max;
+	u64			exec_max;
+	u64			slice_max;
+
+	u64			nr_migrations_cold;
+	u64			nr_failed_migrations_affine;
+	u64			nr_failed_migrations_running;
+	u64			nr_failed_migrations_hot;
+	u64			nr_forced_migrations;
+
+	u64			nr_wakeups;
+	u64			nr_wakeups_sync;
+	u64			nr_wakeups_migrate;
+	u64			nr_wakeups_local;
+	u64			nr_wakeups_remote;
+	u64			nr_wakeups_affine;
+	u64			nr_wakeups_affine_attempts;
+	u64			nr_wakeups_passive;
+	u64			nr_wakeups_idle;
+};
+#endif
+
+struct sched_entity {
+	struct load_weight	load;		/* for load-balancing */
+	struct rb_node		run_node;
+	struct list_head	group_node;
+	unsigned int		on_rq;
+
+	u64			exec_start;
+	u64			sum_exec_runtime;
+	u64			vruntime;
+	u64			prev_sum_exec_runtime;
+
+	u64			nr_migrations;
+
+#ifdef CONFIG_SCHEDSTATS
+	struct sched_statistics statistics;
+#endif
+
+#ifdef CONFIG_FAIR_GROUP_SCHED
+	struct sched_entity	*parent;
+	/* rq on which this entity is (to be) queued: */
+	struct cfs_rq		*cfs_rq;
+	/* rq "owned" by this entity/group: */
+	struct cfs_rq		*my_q;
+#endif
+};
+
+struct sched_rt_entity {
+	struct list_head run_list;
+	unsigned long timeout;
+	unsigned int time_slice;
+	int nr_cpus_allowed;
+
+	struct sched_rt_entity *back;
+#ifdef CONFIG_RT_GROUP_SCHED
+	struct sched_rt_entity	*parent;
+	/* rq on which this entity is (to be) queued: */
+	struct rt_rq		*rt_rq;
+	/* rq "owned" by this entity/group: */
+	struct rt_rq		*my_q;
+#endif
+};
+
+/*
+ * default timeslice is 100 msecs (used only for SCHED_RR tasks).
+ * Timeslices get refilled after they expire.
+ */
+#define RR_TIMESLICE		(100 * HZ / 1000)
+
+struct rcu_node;
+
+enum perf_event_task_context {
+	perf_invalid_context = -1,
+	perf_hw_context = 0,
+	perf_sw_context,
+	perf_nr_task_contexts,
+};
+
+struct task_struct {
+	volatile long state;	/* -1 unrunnable, 0 runnable, >0 stopped */
+	void *stack;
+	atomic_t usage;
+	unsigned int flags;	/* per process flags, defined below */
+	unsigned int ptrace;
+
+#ifdef CONFIG_SMP
+	struct llist_node wake_entry;
+	int on_cpu;
+#endif
+	int on_rq;
+
+	int prio, static_prio, normal_prio;
+	unsigned int rt_priority;
+	const struct sched_class *sched_class;
+	struct sched_entity se;
+	struct sched_rt_entity rt;
+
+#ifdef CONFIG_PREEMPT_NOTIFIERS
+	/* list of struct preempt_notifier: */
+	struct hlist_head preempt_notifiers;
+#endif
+
+	/*
+	 * fpu_counter contains the number of consecutive context switches
+	 * that the FPU is used. If this is over a threshold, the lazy fpu
+	 * saving becomes unlazy to save the trap. This is an unsigned char
+	 * so that after 256 times the counter wraps and the behavior turns
+	 * lazy again; this to deal with bursty apps that only use FPU for
+	 * a short time
+	 */
+	unsigned char fpu_counter;
+#ifdef CONFIG_BLK_DEV_IO_TRACE
+	unsigned int btrace_seq;
+#endif
+
+	unsigned int policy;
+	cpumask_t cpus_allowed;
+
+#ifdef CONFIG_PREEMPT_RCU
+	int rcu_read_lock_nesting;
+	char rcu_read_unlock_special;
+	struct list_head rcu_node_entry;
+#endif /* #ifdef CONFIG_PREEMPT_RCU */
+#ifdef CONFIG_TREE_PREEMPT_RCU
+	struct rcu_node *rcu_blocked_node;
+#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
+#ifdef CONFIG_RCU_BOOST
+	struct rt_mutex *rcu_boost_mutex;
+#endif /* #ifdef CONFIG_RCU_BOOST */
+
+#if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
+	struct sched_info sched_info;
+#endif
+
+	struct list_head tasks;
+#ifdef CONFIG_SMP
+	struct plist_node pushable_tasks;
+#endif
+
+	struct mm_struct *mm, *active_mm;
+#ifdef CONFIG_COMPAT_BRK
+	unsigned brk_randomized:1;
+#endif
+#if defined(SPLIT_RSS_COUNTING)
+	struct task_rss_stat	rss_stat;
+#endif
+/* task state */
+	int exit_state;
+	int exit_code, exit_signal;
+	int pdeath_signal;  /*  The signal sent when the parent dies  */
+	unsigned int jobctl;	/* JOBCTL_*, siglock protected */
+	/* ??? */
+	unsigned int personality;
+	unsigned did_exec:1;
+	unsigned in_execve:1;	/* Tell the LSMs that the process is doing an
+				 * execve */
+	unsigned in_iowait:1;
+
+
+	/* Revert to default priority/policy when forking */
+	unsigned sched_reset_on_fork:1;
+	unsigned sched_contributes_to_load:1;
+
+#ifdef CONFIG_GENERIC_HARDIRQS
+	/* IRQ handler threads */
+	unsigned irq_thread:1;
+#endif
+
+	pid_t pid;
+	pid_t tgid;
+
+#ifdef CONFIG_CC_STACKPROTECTOR
+	/* Canary value for the -fstack-protector gcc feature */
+	unsigned long stack_canary;
+#endif
+
+	/* 
+	 * pointers to (original) parent process, youngest child, younger sibling,
+	 * older sibling, respectively.  (p->father can be replaced with 
+	 * p->real_parent->pid)
+	 */
+	struct task_struct __rcu *real_parent; /* real parent process */
+	struct task_struct __rcu *parent; /* recipient of SIGCHLD, wait4() reports */
+	/*
+	 * children/sibling forms the list of my natural children
+	 */
+	struct list_head children;	/* list of my children */
+	struct list_head sibling;	/* linkage in my parent's children list */
+	struct task_struct *group_leader;	/* threadgroup leader */
+
+	/*
+	 * ptraced is the list of tasks this task is using ptrace on.
+	 * This includes both natural children and PTRACE_ATTACH targets.
+	 * p->ptrace_entry is p's link on the p->parent->ptraced list.
+	 */
+	struct list_head ptraced;
+	struct list_head ptrace_entry;
+
+	/* PID/PID hash table linkage. */
+	struct pid_link pids[PIDTYPE_MAX];
+	struct list_head thread_group;
+
+	struct completion *vfork_done;		/* for vfork() */
+	int __user *set_child_tid;		/* CLONE_CHILD_SETTID */
+	int __user *clear_child_tid;		/* CLONE_CHILD_CLEARTID */
+
+	cputime_t utime, stime, utimescaled, stimescaled;
+	cputime_t gtime;
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING
+	cputime_t prev_utime, prev_stime;
+#endif
+	unsigned long nvcsw, nivcsw; /* context switch counts */
+	struct timespec start_time; 		/* monotonic time */
+	struct timespec real_start_time;	/* boot based time */
+/* mm fault and swap info: this can arguably be seen as either mm-specific or thread-specific */
+	unsigned long min_flt, maj_flt;
+
+	struct task_cputime cputime_expires;
+	struct list_head cpu_timers[3];
+
+/* process credentials */
+	const struct cred __rcu *real_cred; /* objective and real subjective task
+					 * credentials (COW) */
+	const struct cred __rcu *cred;	/* effective (overridable) subjective task
+					 * credentials (COW) */
+	struct cred *replacement_session_keyring; /* for KEYCTL_SESSION_TO_PARENT */
+
+	char comm[TASK_COMM_LEN]; /* executable name excluding path
+				     - access with [gs]et_task_comm (which lock
+				       it with task_lock())
+				     - initialized normally by setup_new_exec */
+/* file system info */
+	int link_count, total_link_count;
+#ifdef CONFIG_SYSVIPC
+/* ipc stuff */
+	struct sysv_sem sysvsem;
+#endif
+#ifdef CONFIG_DETECT_HUNG_TASK
+/* hung task detection */
+	unsigned long last_switch_count;
+#endif
+/* CPU-specific state of this task */
+	struct thread_struct thread;
+/* filesystem information */
+	struct fs_struct *fs;
+/* open file information */
+	struct files_struct *files;
+/* namespaces */
+	struct nsproxy *nsproxy;
+/* signal handlers */
+	struct signal_struct *signal;
+	struct sighand_struct *sighand;
+
+	sigset_t blocked, real_blocked;
+	sigset_t saved_sigmask;	/* restored if set_restore_sigmask() was used */
+	struct sigpending pending;
+
+	unsigned long sas_ss_sp;
+	size_t sas_ss_size;
+	int (*notifier)(void *priv);
+	void *notifier_data;
+	sigset_t *notifier_mask;
+	struct audit_context *audit_context;
+#ifdef CONFIG_AUDITSYSCALL
+	uid_t loginuid;
+	unsigned int sessionid;
+#endif
+	seccomp_t seccomp;
+
+/* Thread group tracking */
+   	u32 parent_exec_id;
+   	u32 self_exec_id;
+/* Protection of (de-)allocation: mm, files, fs, tty, keyrings, mems_allowed,
+ * mempolicy */
+	spinlock_t alloc_lock;
+
+	/* Protection of the PI data structures: */
+	raw_spinlock_t pi_lock;
+
+#ifdef CONFIG_RT_MUTEXES
+	/* PI waiters blocked on a rt_mutex held by this task */
+	struct plist_head pi_waiters;
+	/* Deadlock detection and priority inheritance handling */
+	struct rt_mutex_waiter *pi_blocked_on;
+#endif
+
+#ifdef CONFIG_DEBUG_MUTEXES
+	/* mutex deadlock detection */
+	struct mutex_waiter *blocked_on;
+#endif
+#ifdef CONFIG_TRACE_IRQFLAGS
+	unsigned int irq_events;
+	unsigned long hardirq_enable_ip;
+	unsigned long hardirq_disable_ip;
+	unsigned int hardirq_enable_event;
+	unsigned int hardirq_disable_event;
+	int hardirqs_enabled;
+	int hardirq_context;
+	unsigned long softirq_disable_ip;
+	unsigned long softirq_enable_ip;
+	unsigned int softirq_disable_event;
+	unsigned int softirq_enable_event;
+	int softirqs_enabled;
+	int softirq_context;
+#endif
+#ifdef CONFIG_LOCKDEP
+# define MAX_LOCK_DEPTH 48UL
+	u64 curr_chain_key;
+	int lockdep_depth;
+	unsigned int lockdep_recursion;
+	struct held_lock held_locks[MAX_LOCK_DEPTH];
+	gfp_t lockdep_reclaim_gfp;
+#endif
+
+/* journalling filesystem info */
+	void *journal_info;
+
+/* stacked block device info */
+	struct bio_list *bio_list;
+
+#ifdef CONFIG_BLOCK
+/* stack plugging */
+	struct blk_plug *plug;
+#endif
+
+/* VM state */
+	struct reclaim_state *reclaim_state;
+
+	struct backing_dev_info *backing_dev_info;
+
+	struct io_context *io_context;
+
+	unsigned long ptrace_message;
+	siginfo_t *last_siginfo; /* For ptrace use.  */
+	struct task_io_accounting ioac;
+#if defined(CONFIG_TASK_XACCT)
+	u64 acct_rss_mem1;	/* accumulated rss usage */
+	u64 acct_vm_mem1;	/* accumulated virtual memory usage */
+	cputime_t acct_timexpd;	/* stime + utime since last update */
+#endif
+#ifdef CONFIG_CPUSETS
+	nodemask_t mems_allowed;	/* Protected by alloc_lock */
+	seqcount_t mems_allowed_seq;	/* Seqence no to catch updates */
+	int cpuset_mem_spread_rotor;
+	int cpuset_slab_spread_rotor;
+#endif
+#ifdef CONFIG_CGROUPS
+	/* Control Group info protected by css_set_lock */
+	struct css_set __rcu *cgroups;
+	/* cg_list protected by css_set_lock and tsk->alloc_lock */
+	struct list_head cg_list;
+#endif
+#ifdef CONFIG_FUTEX
+	struct robust_list_head __user *robust_list;
+#ifdef CONFIG_COMPAT
+	struct compat_robust_list_head __user *compat_robust_list;
+#endif
+	struct list_head pi_state_list;
+	struct futex_pi_state *pi_state_cache;
+#endif
+#ifdef CONFIG_PERF_EVENTS
+	struct perf_event_context *perf_event_ctxp[perf_nr_task_contexts];
+	struct mutex perf_event_mutex;
+	struct list_head perf_event_list;
+#endif
+#ifdef CONFIG_NUMA
+	struct mempolicy *mempolicy;	/* Protected by alloc_lock */
+	short il_next;
+	short pref_node_fork;
+#endif
+	struct rcu_head rcu;
+
+	/*
+	 * cache last used pipe for splice
+	 */
+	struct pipe_inode_info *splice_pipe;
+#ifdef	CONFIG_TASK_DELAY_ACCT
+	struct task_delay_info *delays;
+#endif
+#ifdef CONFIG_FAULT_INJECTION
+	int make_it_fail;
+#endif
+	/*
+	 * when (nr_dirtied >= nr_dirtied_pause), it's time to call
+	 * balance_dirty_pages() for some dirty throttling pause
+	 */
+	int nr_dirtied;
+	int nr_dirtied_pause;
+	unsigned long dirty_paused_when; /* start of a write-and-pause period */
+
+#ifdef CONFIG_LATENCYTOP
+	int latency_record_count;
+	struct latency_record latency_record[LT_SAVECOUNT];
+#endif
+	/*
+	 * time slack values; these are used to round up poll() and
+	 * select() etc timeout values. These are in nanoseconds.
+	 */
+	unsigned long timer_slack_ns;
+	unsigned long default_timer_slack_ns;
+
+	struct list_head	*scm_work_list;
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	/* Index of current stored address in ret_stack */
+	int curr_ret_stack;
+	/* Stack of return addresses for return function tracing */
+	struct ftrace_ret_stack	*ret_stack;
+	/* time stamp for last schedule */
+	unsigned long long ftrace_timestamp;
+	/*
+	 * Number of functions that haven't been traced
+	 * because of depth overrun.
+	 */
+	atomic_t trace_overrun;
+	/* Pause for the tracing */
+	atomic_t tracing_graph_pause;
+#endif
+#ifdef CONFIG_TRACING
+	/* state flags for use by tracers */
+	unsigned long trace;
+	/* bitmask and counter of trace recursion */
+	unsigned long trace_recursion;
+#endif /* CONFIG_TRACING */
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR /* memcg uses this to do batch job */
+	struct memcg_batch_info {
+		int do_batch;	/* incremented when batch uncharge started */
+		struct mem_cgroup *memcg; /* target memcg of uncharge */
+		unsigned long nr_pages;	/* uncharged usage */
+		unsigned long memsw_nr_pages; /* uncharged mem+swap usage */
+	} memcg_batch;
+#endif
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	atomic_t ptrace_bp_refcnt;
+#endif
+};
+
+/* Future-safe accessor for struct task_struct's cpus_allowed. */
+#define tsk_cpus_allowed(tsk) (&(tsk)->cpus_allowed)
+
+/*
+ * Priority of a process goes from 0..MAX_PRIO-1, valid RT
+ * priority is 0..MAX_RT_PRIO-1, and SCHED_NORMAL/SCHED_BATCH
+ * tasks are in the range MAX_RT_PRIO..MAX_PRIO-1. Priority
+ * values are inverted: lower p->prio value means higher priority.
+ *
+ * The MAX_USER_RT_PRIO value allows the actual maximum
+ * RT priority to be separate from the value exported to
+ * user-space.  This allows kernel threads to set their
+ * priority to a value higher than any user task. Note:
+ * MAX_RT_PRIO must not be smaller than MAX_USER_RT_PRIO.
+ */
+
+#define MAX_USER_RT_PRIO	100
+#define MAX_RT_PRIO		MAX_USER_RT_PRIO
+
+#define MAX_PRIO		(MAX_RT_PRIO + 40)
+#define DEFAULT_PRIO		(MAX_RT_PRIO + 20)
+
+static inline int rt_prio(int prio)
+{
+	if (unlikely(prio < MAX_RT_PRIO))
+		return 1;
+	return 0;
+}
+
+static inline int rt_task(struct task_struct *p)
+{
+	return rt_prio(p->prio);
+}
+
+static inline struct pid *task_pid(struct task_struct *task)
+{
+	return task->pids[PIDTYPE_PID].pid;
+}
+
+static inline struct pid *task_tgid(struct task_struct *task)
+{
+	return task->group_leader->pids[PIDTYPE_PID].pid;
+}
+
+/*
+ * Without tasklist or rcu lock it is not safe to dereference
+ * the result of task_pgrp/task_session even if task == current,
+ * we can race with another thread doing sys_setsid/sys_setpgid.
+ */
+static inline struct pid *task_pgrp(struct task_struct *task)
+{
+	return task->group_leader->pids[PIDTYPE_PGID].pid;
+}
+
+static inline struct pid *task_session(struct task_struct *task)
+{
+	return task->group_leader->pids[PIDTYPE_SID].pid;
+}
+
+struct pid_namespace;
+
+/*
+ * the helpers to get the task's different pids as they are seen
+ * from various namespaces
+ *
+ * task_xid_nr()     : global id, i.e. the id seen from the init namespace;
+ * task_xid_vnr()    : virtual id, i.e. the id seen from the pid namespace of
+ *                     current.
+ * task_xid_nr_ns()  : id seen from the ns specified;
+ *
+ * set_task_vxid()   : assigns a virtual id to a task;
+ *
+ * see also pid_nr() etc in include/linux/pid.h
+ */
+pid_t __task_pid_nr_ns(struct task_struct *task, enum pid_type type,
+			struct pid_namespace *ns);
+
+static inline pid_t task_pid_nr(struct task_struct *tsk)
+{
+	return tsk->pid;
+}
+
+static inline pid_t task_pid_nr_ns(struct task_struct *tsk,
+					struct pid_namespace *ns)
+{
+	return __task_pid_nr_ns(tsk, PIDTYPE_PID, ns);
+}
+
+static inline pid_t task_pid_vnr(struct task_struct *tsk)
+{
+	return __task_pid_nr_ns(tsk, PIDTYPE_PID, NULL);
+}
+
+
+static inline pid_t task_tgid_nr(struct task_struct *tsk)
+{
+	return tsk->tgid;
+}
+
+pid_t task_tgid_nr_ns(struct task_struct *tsk, struct pid_namespace *ns);
+
+static inline pid_t task_tgid_vnr(struct task_struct *tsk)
+{
+	return pid_vnr(task_tgid(tsk));
+}
+
+
+static inline pid_t task_pgrp_nr_ns(struct task_struct *tsk,
+					struct pid_namespace *ns)
+{
+	return __task_pid_nr_ns(tsk, PIDTYPE_PGID, ns);
+}
+
+static inline pid_t task_pgrp_vnr(struct task_struct *tsk)
+{
+	return __task_pid_nr_ns(tsk, PIDTYPE_PGID, NULL);
+}
+
+
+static inline pid_t task_session_nr_ns(struct task_struct *tsk,
+					struct pid_namespace *ns)
+{
+	return __task_pid_nr_ns(tsk, PIDTYPE_SID, ns);
+}
+
+static inline pid_t task_session_vnr(struct task_struct *tsk)
+{
+	return __task_pid_nr_ns(tsk, PIDTYPE_SID, NULL);
+}
+
+/* obsolete, do not use */
+static inline pid_t task_pgrp_nr(struct task_struct *tsk)
+{
+	return task_pgrp_nr_ns(tsk, &init_pid_ns);
+}
+
+/**
+ * pid_alive - check that a task structure is not stale
+ * @p: Task structure to be checked.
+ *
+ * Test if a process is not yet dead (at most zombie state)
+ * If pid_alive fails, then pointers within the task structure
+ * can be stale and must not be dereferenced.
+ */
+static inline int pid_alive(struct task_struct *p)
+{
+	return p->pids[PIDTYPE_PID].pid != NULL;
+}
+
+/**
+ * is_global_init - check if a task structure is init
+ * @tsk: Task structure to be checked.
+ *
+ * Check if a task structure is the first user space task the kernel created.
+ */
+static inline int is_global_init(struct task_struct *tsk)
+{
+	return tsk->pid == 1;
+}
+
+/*
+ * is_container_init:
+ * check whether in the task is init in its own pid namespace.
+ */
+extern int is_container_init(struct task_struct *tsk);
+
+extern struct pid *cad_pid;
+
+extern void free_task(struct task_struct *tsk);
+#define get_task_struct(tsk) do { atomic_inc(&(tsk)->usage); } while(0)
+
+extern void __put_task_struct(struct task_struct *t);
+
+static inline void put_task_struct(struct task_struct *t)
+{
+	if (atomic_dec_and_test(&t->usage))
+		__put_task_struct(t);
+}
+
+extern void task_times(struct task_struct *p, cputime_t *ut, cputime_t *st);
+extern void thread_group_times(struct task_struct *p, cputime_t *ut, cputime_t *st);
+
+extern int task_free_register(struct notifier_block *n);
+extern int task_free_unregister(struct notifier_block *n);
+
+/*
+ * Per process flags
+ */
+#define PF_EXITING	0x00000004	/* getting shut down */
+#define PF_EXITPIDONE	0x00000008	/* pi exit done on shut down */
+#define PF_VCPU		0x00000010	/* I'm a virtual CPU */
+#define PF_WQ_WORKER	0x00000020	/* I'm a workqueue worker */
+#define PF_FORKNOEXEC	0x00000040	/* forked but didn't exec */
+#define PF_MCE_PROCESS  0x00000080      /* process policy on mce errors */
+#define PF_SUPERPRIV	0x00000100	/* used super-user privileges */
+#define PF_DUMPCORE	0x00000200	/* dumped core */
+#define PF_SIGNALED	0x00000400	/* killed by a signal */
+#define PF_MEMALLOC	0x00000800	/* Allocating memory */
+#define PF_NPROC_EXCEEDED 0x00001000	/* set_user noticed that RLIMIT_NPROC was exceeded */
+#define PF_USED_MATH	0x00002000	/* if unset the fpu must be initialized before use */
+#define PF_NOFREEZE	0x00008000	/* this thread should not be frozen */
+#define PF_FROZEN	0x00010000	/* frozen for system suspend */
+#define PF_FSTRANS	0x00020000	/* inside a filesystem transaction */
+#define PF_KSWAPD	0x00040000	/* I am kswapd */
+#define PF_LESS_THROTTLE 0x00100000	/* Throttle me less: I clean memory */
+#define PF_KTHREAD	0x00200000	/* I am a kernel thread */
+#define PF_RANDOMIZE	0x00400000	/* randomize virtual address space */
+#define PF_SWAPWRITE	0x00800000	/* Allowed to write to swap */
+#define PF_SPREAD_PAGE	0x01000000	/* Spread page cache over cpuset */
+#define PF_SPREAD_SLAB	0x02000000	/* Spread some slab caches over cpuset */
+#define PF_THREAD_BOUND	0x04000000	/* Thread bound to specific cpu */
+#define PF_MCE_EARLY    0x08000000      /* Early kill for mce process policy */
+#define PF_MEMPOLICY	0x10000000	/* Non-default NUMA mempolicy */
+#define PF_MUTEX_TESTER	0x20000000	/* Thread belongs to the rt mutex tester */
+#define PF_FREEZER_SKIP	0x40000000	/* Freezer should not count it as freezable */
+
+/*
+ * Only the _current_ task can read/write to tsk->flags, but other
+ * tasks can access tsk->flags in readonly mode for example
+ * with tsk_used_math (like during threaded core dumping).
+ * There is however an exception to this rule during ptrace
+ * or during fork: the ptracer task is allowed to write to the
+ * child->flags of its traced child (same goes for fork, the parent
+ * can write to the child->flags), because we're guaranteed the
+ * child is not running and in turn not changing child->flags
+ * at the same time the parent does it.
+ */
+#define clear_stopped_child_used_math(child) do { (child)->flags &= ~PF_USED_MATH; } while (0)
+#define set_stopped_child_used_math(child) do { (child)->flags |= PF_USED_MATH; } while (0)
+#define clear_used_math() clear_stopped_child_used_math(current)
+#define set_used_math() set_stopped_child_used_math(current)
+#define conditional_stopped_child_used_math(condition, child) \
+	do { (child)->flags &= ~PF_USED_MATH, (child)->flags |= (condition) ? PF_USED_MATH : 0; } while (0)
+#define conditional_used_math(condition) \
+	conditional_stopped_child_used_math(condition, current)
+#define copy_to_stopped_child_used_math(child) \
+	do { (child)->flags &= ~PF_USED_MATH, (child)->flags |= current->flags & PF_USED_MATH; } while (0)
+/* NOTE: this will return 0 or PF_USED_MATH, it will never return 1 */
+#define tsk_used_math(p) ((p)->flags & PF_USED_MATH)
+#define used_math() tsk_used_math(current)
+
+/*
+ * task->jobctl flags
+ */
+#define JOBCTL_STOP_SIGMASK	0xffff	/* signr of the last group stop */
+
+#define JOBCTL_STOP_DEQUEUED_BIT 16	/* stop signal dequeued */
+#define JOBCTL_STOP_PENDING_BIT	17	/* task should stop for group stop */
+#define JOBCTL_STOP_CONSUME_BIT	18	/* consume group stop count */
+#define JOBCTL_TRAP_STOP_BIT	19	/* trap for STOP */
+#define JOBCTL_TRAP_NOTIFY_BIT	20	/* trap for NOTIFY */
+#define JOBCTL_TRAPPING_BIT	21	/* switching to TRACED */
+#define JOBCTL_LISTENING_BIT	22	/* ptracer is listening for events */
+
+#define JOBCTL_STOP_DEQUEUED	(1 << JOBCTL_STOP_DEQUEUED_BIT)
+#define JOBCTL_STOP_PENDING	(1 << JOBCTL_STOP_PENDING_BIT)
+#define JOBCTL_STOP_CONSUME	(1 << JOBCTL_STOP_CONSUME_BIT)
+#define JOBCTL_TRAP_STOP	(1 << JOBCTL_TRAP_STOP_BIT)
+#define JOBCTL_TRAP_NOTIFY	(1 << JOBCTL_TRAP_NOTIFY_BIT)
+#define JOBCTL_TRAPPING		(1 << JOBCTL_TRAPPING_BIT)
+#define JOBCTL_LISTENING	(1 << JOBCTL_LISTENING_BIT)
+
+#define JOBCTL_TRAP_MASK	(JOBCTL_TRAP_STOP | JOBCTL_TRAP_NOTIFY)
+#define JOBCTL_PENDING_MASK	(JOBCTL_STOP_PENDING | JOBCTL_TRAP_MASK)
+
+extern bool task_set_jobctl_pending(struct task_struct *task,
+				    unsigned int mask);
+extern void task_clear_jobctl_trapping(struct task_struct *task);
+extern void task_clear_jobctl_pending(struct task_struct *task,
+				      unsigned int mask);
+
+#ifdef CONFIG_PREEMPT_RCU
+
+#define RCU_READ_UNLOCK_BLOCKED (1 << 0) /* blocked while in RCU read-side. */
+#define RCU_READ_UNLOCK_NEED_QS (1 << 1) /* RCU core needs CPU response. */
+
+static inline void rcu_copy_process(struct task_struct *p)
+{
+	p->rcu_read_lock_nesting = 0;
+	p->rcu_read_unlock_special = 0;
+#ifdef CONFIG_TREE_PREEMPT_RCU
+	p->rcu_blocked_node = NULL;
+#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
+#ifdef CONFIG_RCU_BOOST
+	p->rcu_boost_mutex = NULL;
+#endif /* #ifdef CONFIG_RCU_BOOST */
+	INIT_LIST_HEAD(&p->rcu_node_entry);
+}
+
+#else
+
+static inline void rcu_copy_process(struct task_struct *p)
+{
+}
+
+#endif
+
+#ifdef CONFIG_SMP
+extern void do_set_cpus_allowed(struct task_struct *p,
+			       const struct cpumask *new_mask);
+
+extern int set_cpus_allowed_ptr(struct task_struct *p,
+				const struct cpumask *new_mask);
+#else
+static inline void do_set_cpus_allowed(struct task_struct *p,
+				      const struct cpumask *new_mask)
+{
+}
+static inline int set_cpus_allowed_ptr(struct task_struct *p,
+				       const struct cpumask *new_mask)
+{
+	if (!cpumask_test_cpu(0, new_mask))
+		return -EINVAL;
+	return 0;
+}
+#endif
+
+#ifndef CONFIG_CPUMASK_OFFSTACK
+static inline int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask)
+{
+	return set_cpus_allowed_ptr(p, &new_mask);
+}
+#endif
+
+/*
+ * Do not use outside of architecture code which knows its limitations.
+ *
+ * sched_clock() has no promise of monotonicity or bounded drift between
+ * CPUs, use (which you should not) requires disabling IRQs.
+ *
+ * Please use one of the three interfaces below.
+ */
+extern unsigned long long notrace sched_clock(void);
+/*
+ * See the comment in kernel/sched_clock.c
+ */
+extern u64 cpu_clock(int cpu);
+extern u64 local_clock(void);
+extern u64 sched_clock_cpu(int cpu);
+
+
+extern void sched_clock_init(void);
+
+#ifndef CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
+static inline void sched_clock_tick(void)
+{
+}
+
+static inline void sched_clock_idle_sleep_event(void)
+{
+}
+
+static inline void sched_clock_idle_wakeup_event(u64 delta_ns)
+{
+}
+#else
+/*
+ * Architectures can set this to 1 if they have specified
+ * CONFIG_HAVE_UNSTABLE_SCHED_CLOCK in their arch Kconfig,
+ * but then during bootup it turns out that sched_clock()
+ * is reliable after all:
+ */
+extern int sched_clock_stable;
+
+extern void sched_clock_tick(void);
+extern void sched_clock_idle_sleep_event(void);
+extern void sched_clock_idle_wakeup_event(u64 delta_ns);
+#endif
+
+#ifdef CONFIG_IRQ_TIME_ACCOUNTING
+/*
+ * An i/f to runtime opt-in for irq time accounting based off of sched_clock.
+ * The reason for this explicit opt-in is not to have perf penalty with
+ * slow sched_clocks.
+ */
+extern void enable_sched_clock_irqtime(void);
+extern void disable_sched_clock_irqtime(void);
+#else
+static inline void enable_sched_clock_irqtime(void) {}
+static inline void disable_sched_clock_irqtime(void) {}
+#endif
+
+extern unsigned long long
+task_sched_runtime(struct task_struct *task);
+
+/* sched_exec is called by processes performing an exec */
+#ifdef CONFIG_SMP
+extern void sched_exec(void);
+#else
+#define sched_exec()   {}
+#endif
+
+extern void sched_clock_idle_sleep_event(void);
+extern void sched_clock_idle_wakeup_event(u64 delta_ns);
+
+#ifdef CONFIG_HOTPLUG_CPU
+extern void idle_task_exit(void);
+#else
+static inline void idle_task_exit(void) {}
+#endif
+
+#if defined(CONFIG_NO_HZ) && defined(CONFIG_SMP)
+extern void wake_up_idle_cpu(int cpu);
+#else
+static inline void wake_up_idle_cpu(int cpu) { }
+#endif
+
+extern unsigned int sysctl_sched_latency;
+extern unsigned int sysctl_sched_min_granularity;
+extern unsigned int sysctl_sched_wakeup_granularity;
+extern unsigned int sysctl_sched_child_runs_first;
+
+enum sched_tunable_scaling {
+	SCHED_TUNABLESCALING_NONE,
+	SCHED_TUNABLESCALING_LOG,
+	SCHED_TUNABLESCALING_LINEAR,
+	SCHED_TUNABLESCALING_END,
+};
+extern enum sched_tunable_scaling sysctl_sched_tunable_scaling;
+
+#ifdef CONFIG_SCHED_DEBUG
+extern unsigned int sysctl_sched_migration_cost;
+extern unsigned int sysctl_sched_nr_migrate;
+extern unsigned int sysctl_sched_time_avg;
+extern unsigned int sysctl_timer_migration;
+extern unsigned int sysctl_sched_shares_window;
+
+int sched_proc_update_handler(struct ctl_table *table, int write,
+		void __user *buffer, size_t *length,
+		loff_t *ppos);
+#endif
+#ifdef CONFIG_SCHED_DEBUG
+static inline unsigned int get_sysctl_timer_migration(void)
+{
+	return sysctl_timer_migration;
+}
+#else
+static inline unsigned int get_sysctl_timer_migration(void)
+{
+	return 1;
+}
+#endif
+extern unsigned int sysctl_sched_rt_period;
+extern int sysctl_sched_rt_runtime;
+
+int sched_rt_handler(struct ctl_table *table, int write,
+		void __user *buffer, size_t *lenp,
+		loff_t *ppos);
+
+#ifdef CONFIG_SCHED_AUTOGROUP
+extern unsigned int sysctl_sched_autogroup_enabled;
+
+extern void sched_autogroup_create_attach(struct task_struct *p);
+extern void sched_autogroup_detach(struct task_struct *p);
+extern void sched_autogroup_fork(struct signal_struct *sig);
+extern void sched_autogroup_exit(struct signal_struct *sig);
+#ifdef CONFIG_PROC_FS
+extern void proc_sched_autogroup_show_task(struct task_struct *p, struct seq_file *m);
+extern int proc_sched_autogroup_set_nice(struct task_struct *p, int nice);
+#endif
+#else
+static inline void sched_autogroup_create_attach(struct task_struct *p) { }
+static inline void sched_autogroup_detach(struct task_struct *p) { }
+static inline void sched_autogroup_fork(struct signal_struct *sig) { }
+static inline void sched_autogroup_exit(struct signal_struct *sig) { }
+#endif
+
+#ifdef CONFIG_CFS_BANDWIDTH
+extern unsigned int sysctl_sched_cfs_bandwidth_slice;
+#endif
+
+#ifdef CONFIG_RT_MUTEXES
+extern int rt_mutex_getprio(struct task_struct *p);
+extern void rt_mutex_setprio(struct task_struct *p, int prio);
+extern void rt_mutex_adjust_pi(struct task_struct *p);
+static inline bool tsk_is_pi_blocked(struct task_struct *tsk)
+{
+	return tsk->pi_blocked_on != NULL;
+}
+#else
+static inline int rt_mutex_getprio(struct task_struct *p)
+{
+	return p->normal_prio;
+}
+# define rt_mutex_adjust_pi(p)		do { } while (0)
+static inline bool tsk_is_pi_blocked(struct task_struct *tsk)
+{
+	return false;
+}
+#endif
+
+extern bool yield_to(struct task_struct *p, bool preempt);
+extern void set_user_nice(struct task_struct *p, long nice);
+extern int task_prio(const struct task_struct *p);
+extern int task_nice(const struct task_struct *p);
+extern int can_nice(const struct task_struct *p, const int nice);
+extern int task_curr(const struct task_struct *p);
+extern int idle_cpu(int cpu);
+extern int sched_setscheduler(struct task_struct *, int,
+			      const struct sched_param *);
+extern int sched_setscheduler_nocheck(struct task_struct *, int,
+				      const struct sched_param *);
+extern struct task_struct *idle_task(int cpu);
+/**
+ * is_idle_task - is the specified task an idle task?
+ * @p: the task in question.
+ */
+static inline bool is_idle_task(const struct task_struct *p)
+{
+	return p->pid == 0;
+}
+extern struct task_struct *curr_task(int cpu);
+extern void set_curr_task(int cpu, struct task_struct *p);
+
+void yield(void);
+
+/*
+ * The default (Linux) execution domain.
+ */
+extern struct exec_domain	default_exec_domain;
+
+union thread_union {
+	struct thread_info thread_info;
+	unsigned long stack[THREAD_SIZE/sizeof(long)];
+};
+
+#ifndef __HAVE_ARCH_KSTACK_END
+static inline int kstack_end(void *addr)
+{
+	/* Reliable end of stack detection:
+	 * Some APM bios versions misalign the stack
+	 */
+	return !(((unsigned long)addr+sizeof(void*)-1) & (THREAD_SIZE-sizeof(void*)));
+}
+#endif
+
+extern union thread_union init_thread_union;
+extern struct task_struct init_task;
+
+extern struct   mm_struct init_mm;
+
+extern struct pid_namespace init_pid_ns;
+
+/*
+ * find a task by one of its numerical ids
+ *
+ * find_task_by_pid_ns():
+ *      finds a task by its pid in the specified namespace
+ * find_task_by_vpid():
+ *      finds a task by its virtual pid
+ *
+ * see also find_vpid() etc in include/linux/pid.h
+ */
+
+extern struct task_struct *find_task_by_vpid(pid_t nr);
+extern struct task_struct *find_task_by_pid_ns(pid_t nr,
+		struct pid_namespace *ns);
+
+extern void __set_special_pids(struct pid *pid);
+
+/* per-UID process charging. */
+extern struct user_struct * alloc_uid(struct user_namespace *, uid_t);
+static inline struct user_struct *get_uid(struct user_struct *u)
+{
+	atomic_inc(&u->__count);
+	return u;
+}
+extern void free_uid(struct user_struct *);
+extern void release_uids(struct user_namespace *ns);
+
+#include <asm/current.h>
+
+extern void xtime_update(unsigned long ticks);
+
+extern int wake_up_state(struct task_struct *tsk, unsigned int state);
+extern int wake_up_process(struct task_struct *tsk);
+extern void wake_up_new_task(struct task_struct *tsk);
+#ifdef CONFIG_SMP
+ extern void kick_process(struct task_struct *tsk);
+#else
+ static inline void kick_process(struct task_struct *tsk) { }
+#endif
+extern void sched_fork(struct task_struct *p);
+extern void sched_dead(struct task_struct *p);
+
+extern void proc_caches_init(void);
+extern void flush_signals(struct task_struct *);
+extern void __flush_signals(struct task_struct *);
+extern void ignore_signals(struct task_struct *);
+extern void flush_signal_handlers(struct task_struct *, int force_default);
+extern int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info);
+
+static inline int dequeue_signal_lock(struct task_struct *tsk, sigset_t *mask, siginfo_t *info)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&tsk->sighand->siglock, flags);
+	ret = dequeue_signal(tsk, mask, info);
+	spin_unlock_irqrestore(&tsk->sighand->siglock, flags);
+
+	return ret;
+}
+
+extern void block_all_signals(int (*notifier)(void *priv), void *priv,
+			      sigset_t *mask);
+extern void unblock_all_signals(void);
+extern void release_task(struct task_struct * p);
+extern int send_sig_info(int, struct siginfo *, struct task_struct *);
+extern int force_sigsegv(int, struct task_struct *);
+extern int force_sig_info(int, struct siginfo *, struct task_struct *);
+extern int __kill_pgrp_info(int sig, struct siginfo *info, struct pid *pgrp);
+extern int kill_pid_info(int sig, struct siginfo *info, struct pid *pid);
+extern int kill_pid_info_as_cred(int, struct siginfo *, struct pid *,
+				const struct cred *, u32);
+extern int kill_pgrp(struct pid *pid, int sig, int priv);
+extern int kill_pid(struct pid *pid, int sig, int priv);
+extern int kill_proc_info(int, struct siginfo *, pid_t);
+extern __must_check bool do_notify_parent(struct task_struct *, int);
+extern void __wake_up_parent(struct task_struct *p, struct task_struct *parent);
+extern void force_sig(int, struct task_struct *);
+extern int send_sig(int, struct task_struct *, int);
+extern int zap_other_threads(struct task_struct *p);
+extern struct sigqueue *sigqueue_alloc(void);
+extern void sigqueue_free(struct sigqueue *);
+extern int send_sigqueue(struct sigqueue *,  struct task_struct *, int group);
+extern int do_sigaction(int, struct k_sigaction *, struct k_sigaction *);
+extern int do_sigaltstack(const stack_t __user *, stack_t __user *, unsigned long);
+
+static inline int kill_cad_pid(int sig, int priv)
+{
+	return kill_pid(cad_pid, sig, priv);
+}
+
+/* These can be the second arg to send_sig_info/send_group_sig_info.  */
+#define SEND_SIG_NOINFO ((struct siginfo *) 0)
+#define SEND_SIG_PRIV	((struct siginfo *) 1)
+#define SEND_SIG_FORCED	((struct siginfo *) 2)
+
+/*
+ * True if we are on the alternate signal stack.
+ */
+static inline int on_sig_stack(unsigned long sp)
+{
+#ifdef CONFIG_STACK_GROWSUP
+	return sp >= current->sas_ss_sp &&
+		sp - current->sas_ss_sp < current->sas_ss_size;
+#else
+	return sp > current->sas_ss_sp &&
+		sp - current->sas_ss_sp <= current->sas_ss_size;
+#endif
+}
+
+static inline int sas_ss_flags(unsigned long sp)
+{
+	return (current->sas_ss_size == 0 ? SS_DISABLE
+		: on_sig_stack(sp) ? SS_ONSTACK : 0);
+}
+
+/*
+ * Routines for handling mm_structs
+ */
+extern struct mm_struct * mm_alloc(void);
+
+/* mmdrop drops the mm and the page tables */
+extern void __mmdrop(struct mm_struct *);
+static inline void mmdrop(struct mm_struct * mm)
+{
+	if (unlikely(atomic_dec_and_test(&mm->mm_count)))
+		__mmdrop(mm);
+}
+
+/* mmput gets rid of the mappings and all user-space */
+extern void mmput(struct mm_struct *);
+/* Grab a reference to a task's mm, if it is not already going away */
+extern struct mm_struct *get_task_mm(struct task_struct *task);
+/*
+ * Grab a reference to a task's mm, if it is not already going away
+ * and ptrace_may_access with the mode parameter passed to it
+ * succeeds.
+ */
+extern struct mm_struct *mm_access(struct task_struct *task, unsigned int mode);
+/* Remove the current tasks stale references to the old mm_struct */
+extern void mm_release(struct task_struct *, struct mm_struct *);
+/* Allocate a new mm structure and copy contents from tsk->mm */
+extern struct mm_struct *dup_mm(struct task_struct *tsk);
+
+extern int copy_thread(unsigned long, unsigned long, unsigned long,
+			struct task_struct *, struct pt_regs *);
+extern void flush_thread(void);
+extern void exit_thread(void);
+
+extern void exit_files(struct task_struct *);
+extern void __cleanup_sighand(struct sighand_struct *);
+
+extern void exit_itimers(struct signal_struct *);
+extern void flush_itimer_signals(void);
+
+extern void do_group_exit(int);
+
+extern void daemonize(const char *, ...);
+extern int allow_signal(int);
+extern int disallow_signal(int);
+
+extern int do_execve(const char *,
+		     const char __user * const __user *,
+		     const char __user * const __user *, struct pt_regs *);
+extern long do_fork(unsigned long, unsigned long, struct pt_regs *, unsigned long, int __user *, int __user *);
+struct task_struct *fork_idle(int);
+
+extern void set_task_comm(struct task_struct *tsk, char *from);
+extern char *get_task_comm(char *to, struct task_struct *tsk);
+
+#ifdef CONFIG_SMP
+void scheduler_ipi(void);
+extern unsigned long wait_task_inactive(struct task_struct *, long match_state);
+#else
+static inline void scheduler_ipi(void) { }
+static inline unsigned long wait_task_inactive(struct task_struct *p,
+					       long match_state)
+{
+	return 1;
+}
+#endif
+
+#define next_task(p) \
+	list_entry_rcu((p)->tasks.next, struct task_struct, tasks)
+
+#define for_each_process(p) \
+	for (p = &init_task ; (p = next_task(p)) != &init_task ; )
+
+extern bool current_is_single_threaded(void);
+
+/*
+ * Careful: do_each_thread/while_each_thread is a double loop so
+ *          'break' will not work as expected - use goto instead.
+ */
+#define do_each_thread(g, t) \
+	for (g = t = &init_task ; (g = t = next_task(g)) != &init_task ; ) do
+
+#define while_each_thread(g, t) \
+	while ((t = next_thread(t)) != g)
+
+static inline int get_nr_threads(struct task_struct *tsk)
+{
+	return tsk->signal->nr_threads;
+}
+
+static inline bool thread_group_leader(struct task_struct *p)
+{
+	return p->exit_signal >= 0;
+}
+
+/* Do to the insanities of de_thread it is possible for a process
+ * to have the pid of the thread group leader without actually being
+ * the thread group leader.  For iteration through the pids in proc
+ * all we care about is that we have a task with the appropriate
+ * pid, we don't actually care if we have the right task.
+ */
+static inline int has_group_leader_pid(struct task_struct *p)
+{
+	return p->pid == p->tgid;
+}
+
+static inline
+int same_thread_group(struct task_struct *p1, struct task_struct *p2)
+{
+	return p1->tgid == p2->tgid;
+}
+
+static inline struct task_struct *next_thread(const struct task_struct *p)
+{
+	return list_entry_rcu(p->thread_group.next,
+			      struct task_struct, thread_group);
+}
+
+static inline int thread_group_empty(struct task_struct *p)
+{
+	return list_empty(&p->thread_group);
+}
+
+#define delay_group_leader(p) \
+		(thread_group_leader(p) && !thread_group_empty(p))
+
+/*
+ * Protects ->fs, ->files, ->mm, ->group_info, ->comm, keyring
+ * subscriptions and synchronises with wait4().  Also used in procfs.  Also
+ * pins the final release of task.io_context.  Also protects ->cpuset and
+ * ->cgroup.subsys[]. And ->vfork_done.
+ *
+ * Nests both inside and outside of read_lock(&tasklist_lock).
+ * It must not be nested with write_lock_irq(&tasklist_lock),
+ * neither inside nor outside.
+ */
+static inline void task_lock(struct task_struct *p)
+{
+	spin_lock(&p->alloc_lock);
+}
+
+static inline void task_unlock(struct task_struct *p)
+{
+	spin_unlock(&p->alloc_lock);
+}
+
+extern struct sighand_struct *__lock_task_sighand(struct task_struct *tsk,
+							unsigned long *flags);
+
+static inline struct sighand_struct *lock_task_sighand(struct task_struct *tsk,
+						       unsigned long *flags)
+{
+	struct sighand_struct *ret;
+
+	ret = __lock_task_sighand(tsk, flags);
+	(void)__cond_lock(&tsk->sighand->siglock, ret);
+	return ret;
+}
+
+static inline void unlock_task_sighand(struct task_struct *tsk,
+						unsigned long *flags)
+{
+	spin_unlock_irqrestore(&tsk->sighand->siglock, *flags);
+}
+
+#ifdef CONFIG_CGROUPS
+static inline void threadgroup_change_begin(struct task_struct *tsk)
+{
+	down_read(&tsk->signal->group_rwsem);
+}
+static inline void threadgroup_change_end(struct task_struct *tsk)
+{
+	up_read(&tsk->signal->group_rwsem);
+}
+
+/**
+ * threadgroup_lock - lock threadgroup
+ * @tsk: member task of the threadgroup to lock
+ *
+ * Lock the threadgroup @tsk belongs to.  No new task is allowed to enter
+ * and member tasks aren't allowed to exit (as indicated by PF_EXITING) or
+ * perform exec.  This is useful for cases where the threadgroup needs to
+ * stay stable across blockable operations.
+ *
+ * fork and exit paths explicitly call threadgroup_change_{begin|end}() for
+ * synchronization.  While held, no new task will be added to threadgroup
+ * and no existing live task will have its PF_EXITING set.
+ *
+ * During exec, a task goes and puts its thread group through unusual
+ * changes.  After de-threading, exclusive access is assumed to resources
+ * which are usually shared by tasks in the same group - e.g. sighand may
+ * be replaced with a new one.  Also, the exec'ing task takes over group
+ * leader role including its pid.  Exclude these changes while locked by
+ * grabbing cred_guard_mutex which is used to synchronize exec path.
+ */
+static inline void threadgroup_lock(struct task_struct *tsk)
+{
+	/*
+	 * exec uses exit for de-threading nesting group_rwsem inside
+	 * cred_guard_mutex. Grab cred_guard_mutex first.
+	 */
+	mutex_lock(&tsk->signal->cred_guard_mutex);
+	down_write(&tsk->signal->group_rwsem);
+}
+
+/**
+ * threadgroup_unlock - unlock threadgroup
+ * @tsk: member task of the threadgroup to unlock
+ *
+ * Reverse threadgroup_lock().
+ */
+static inline void threadgroup_unlock(struct task_struct *tsk)
+{
+	up_write(&tsk->signal->group_rwsem);
+	mutex_unlock(&tsk->signal->cred_guard_mutex);
+}
+#else
+static inline void threadgroup_change_begin(struct task_struct *tsk) {}
+static inline void threadgroup_change_end(struct task_struct *tsk) {}
+static inline void threadgroup_lock(struct task_struct *tsk) {}
+static inline void threadgroup_unlock(struct task_struct *tsk) {}
+#endif
+
+#ifndef __HAVE_THREAD_FUNCTIONS
+
+#define task_thread_info(task)	((struct thread_info *)(task)->stack)
+#define task_stack_page(task)	((task)->stack)
+
+static inline void setup_thread_stack(struct task_struct *p, struct task_struct *org)
+{
+	*task_thread_info(p) = *task_thread_info(org);
+	task_thread_info(p)->task = p;
+}
+
+static inline unsigned long *end_of_stack(struct task_struct *p)
+{
+	return (unsigned long *)(task_thread_info(p) + 1);
+}
+
+#endif
+
+static inline int object_is_on_stack(void *obj)
+{
+	void *stack = task_stack_page(current);
+
+	return (obj >= stack) && (obj < (stack + THREAD_SIZE));
+}
+
+extern void thread_info_cache_init(void);
+
+#ifdef CONFIG_DEBUG_STACK_USAGE
+static inline unsigned long stack_not_used(struct task_struct *p)
+{
+	unsigned long *n = end_of_stack(p);
+
+	do { 	/* Skip over canary */
+		n++;
+	} while (!*n);
+
+	return (unsigned long)n - (unsigned long)end_of_stack(p);
+}
+#endif
+
+/* set thread flags in other task's structures
+ * - see asm/thread_info.h for TIF_xxxx flags available
+ */
+static inline void set_tsk_thread_flag(struct task_struct *tsk, int flag)
+{
+	set_ti_thread_flag(task_thread_info(tsk), flag);
+}
+
+static inline void clear_tsk_thread_flag(struct task_struct *tsk, int flag)
+{
+	clear_ti_thread_flag(task_thread_info(tsk), flag);
+}
+
+static inline int test_and_set_tsk_thread_flag(struct task_struct *tsk, int flag)
+{
+	return test_and_set_ti_thread_flag(task_thread_info(tsk), flag);
+}
+
+static inline int test_and_clear_tsk_thread_flag(struct task_struct *tsk, int flag)
+{
+	return test_and_clear_ti_thread_flag(task_thread_info(tsk), flag);
+}
+
+static inline int test_tsk_thread_flag(struct task_struct *tsk, int flag)
+{
+	return test_ti_thread_flag(task_thread_info(tsk), flag);
+}
+
+static inline void set_tsk_need_resched(struct task_struct *tsk)
+{
+	set_tsk_thread_flag(tsk,TIF_NEED_RESCHED);
+}
+
+static inline void clear_tsk_need_resched(struct task_struct *tsk)
+{
+	clear_tsk_thread_flag(tsk,TIF_NEED_RESCHED);
+}
+
+static inline int test_tsk_need_resched(struct task_struct *tsk)
+{
+	return unlikely(test_tsk_thread_flag(tsk,TIF_NEED_RESCHED));
+}
+
+static inline int restart_syscall(void)
+{
+	set_tsk_thread_flag(current, TIF_SIGPENDING);
+	return -ERESTARTNOINTR;
+}
+
+static inline int signal_pending(struct task_struct *p)
+{
+	return unlikely(test_tsk_thread_flag(p,TIF_SIGPENDING));
+}
+
+static inline int __fatal_signal_pending(struct task_struct *p)
+{
+	return unlikely(sigismember(&p->pending.signal, SIGKILL));
+}
+
+static inline int fatal_signal_pending(struct task_struct *p)
+{
+	return signal_pending(p) && __fatal_signal_pending(p);
+}
+
+static inline int signal_pending_state(long state, struct task_struct *p)
+{
+	if (!(state & (TASK_INTERRUPTIBLE | TASK_WAKEKILL)))
+		return 0;
+	if (!signal_pending(p))
+		return 0;
+
+	return (state & TASK_INTERRUPTIBLE) || __fatal_signal_pending(p);
+}
+
+static inline int need_resched(void)
+{
+	return unlikely(test_thread_flag(TIF_NEED_RESCHED));
+}
+
+/*
+ * cond_resched() and cond_resched_lock(): latency reduction via
+ * explicit rescheduling in places that are safe. The return
+ * value indicates whether a reschedule was done in fact.
+ * cond_resched_lock() will drop the spinlock before scheduling,
+ * cond_resched_softirq() will enable bhs before scheduling.
+ */
+extern int _cond_resched(void);
+
+#define cond_resched() ({			\
+	__might_sleep(__FILE__, __LINE__, 0);	\
+	_cond_resched();			\
+})
+
+extern int __cond_resched_lock(spinlock_t *lock);
+
+#ifdef CONFIG_PREEMPT_COUNT
+#define PREEMPT_LOCK_OFFSET	PREEMPT_OFFSET
+#else
+#define PREEMPT_LOCK_OFFSET	0
+#endif
+
+#define cond_resched_lock(lock) ({				\
+	__might_sleep(__FILE__, __LINE__, PREEMPT_LOCK_OFFSET);	\
+	__cond_resched_lock(lock);				\
+})
+
+extern int __cond_resched_softirq(void);
+
+#define cond_resched_softirq() ({					\
+	__might_sleep(__FILE__, __LINE__, SOFTIRQ_DISABLE_OFFSET);	\
+	__cond_resched_softirq();					\
+})
+
+/*
+ * Does a critical section need to be broken due to another
+ * task waiting?: (technically does not depend on CONFIG_PREEMPT,
+ * but a general need for low latency)
+ */
+static inline int spin_needbreak(spinlock_t *lock)
+{
+#ifdef CONFIG_PREEMPT
+	return spin_is_contended(lock);
+#else
+	return 0;
+#endif
+}
+
+/*
+ * Thread group CPU time accounting.
+ */
+void thread_group_cputime(struct task_struct *tsk, struct task_cputime *times);
+void thread_group_cputimer(struct task_struct *tsk, struct task_cputime *times);
+
+static inline void thread_group_cputime_init(struct signal_struct *sig)
+{
+	raw_spin_lock_init(&sig->cputimer.lock);
+}
+
+/*
+ * Reevaluate whether the task has signals pending delivery.
+ * Wake the task if so.
+ * This is required every time the blocked sigset_t changes.
+ * callers must hold sighand->siglock.
+ */
+extern void recalc_sigpending_and_wake(struct task_struct *t);
+extern void recalc_sigpending(void);
+
+extern void signal_wake_up(struct task_struct *t, int resume_stopped);
+
+/*
+ * Wrappers for p->thread_info->cpu access. No-op on UP.
+ */
+#ifdef CONFIG_SMP
+
+static inline unsigned int task_cpu(const struct task_struct *p)
+{
+	return task_thread_info(p)->cpu;
+}
+
+extern void set_task_cpu(struct task_struct *p, unsigned int cpu);
+
+#else
+
+static inline unsigned int task_cpu(const struct task_struct *p)
+{
+	return 0;
+}
+
+static inline void set_task_cpu(struct task_struct *p, unsigned int cpu)
+{
+}
+
+#endif /* CONFIG_SMP */
+
+extern long sched_setaffinity(pid_t pid, const struct cpumask *new_mask);
+extern long sched_getaffinity(pid_t pid, struct cpumask *mask);
+
+extern void normalize_rt_tasks(void);
+
+#ifdef CONFIG_CGROUP_SCHED
+
+extern struct task_group root_task_group;
+
+extern struct task_group *sched_create_group(struct task_group *parent);
+extern void sched_destroy_group(struct task_group *tg);
+extern void sched_move_task(struct task_struct *tsk);
+#ifdef CONFIG_FAIR_GROUP_SCHED
+extern int sched_group_set_shares(struct task_group *tg, unsigned long shares);
+extern unsigned long sched_group_shares(struct task_group *tg);
+#endif
+#ifdef CONFIG_RT_GROUP_SCHED
+extern int sched_group_set_rt_runtime(struct task_group *tg,
+				      long rt_runtime_us);
+extern long sched_group_rt_runtime(struct task_group *tg);
+extern int sched_group_set_rt_period(struct task_group *tg,
+				      long rt_period_us);
+extern long sched_group_rt_period(struct task_group *tg);
+extern int sched_rt_can_attach(struct task_group *tg, struct task_struct *tsk);
+#endif
+#endif
+
+extern int task_can_switch_user(struct user_struct *up,
+					struct task_struct *tsk);
+
+#ifdef CONFIG_TASK_XACCT
+static inline void add_rchar(struct task_struct *tsk, ssize_t amt)
+{
+	tsk->ioac.rchar += amt;
+}
+
+static inline void add_wchar(struct task_struct *tsk, ssize_t amt)
+{
+	tsk->ioac.wchar += amt;
+}
+
+static inline void inc_syscr(struct task_struct *tsk)
+{
+	tsk->ioac.syscr++;
+}
+
+static inline void inc_syscw(struct task_struct *tsk)
+{
+	tsk->ioac.syscw++;
+}
+#else
+static inline void add_rchar(struct task_struct *tsk, ssize_t amt)
+{
+}
+
+static inline void add_wchar(struct task_struct *tsk, ssize_t amt)
+{
+}
+
+static inline void inc_syscr(struct task_struct *tsk)
+{
+}
+
+static inline void inc_syscw(struct task_struct *tsk)
+{
+}
+#endif
+
+#ifndef TASK_SIZE_OF
+#define TASK_SIZE_OF(tsk)	TASK_SIZE
+#endif
+
+#ifdef CONFIG_MM_OWNER
+extern void mm_update_next_owner(struct mm_struct *mm);
+extern void mm_init_owner(struct mm_struct *mm, struct task_struct *p);
+#else
+static inline void mm_update_next_owner(struct mm_struct *mm)
+{
+}
+
+static inline void mm_init_owner(struct mm_struct *mm, struct task_struct *p)
+{
+}
+#endif /* CONFIG_MM_OWNER */
+
+static inline unsigned long task_rlimit(const struct task_struct *tsk,
+		unsigned int limit)
+{
+	return ACCESS_ONCE(tsk->signal->rlim[limit].rlim_cur);
+}
+
+static inline unsigned long task_rlimit_max(const struct task_struct *tsk,
+		unsigned int limit)
+{
+	return ACCESS_ONCE(tsk->signal->rlim[limit].rlim_max);
+}
+
+static inline unsigned long rlimit(unsigned int limit)
+{
+	return task_rlimit(current, limit);
+}
+
+static inline unsigned long rlimit_max(unsigned int limit)
+{
+	return task_rlimit_max(current, limit);
+}
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/linux/screen_info.h b/include/linux/screen_info.h
new file mode 100644
index 00000000..899fbb48
--- /dev/null
+++ b/include/linux/screen_info.h
@@ -0,0 +1,84 @@
+#ifndef _SCREEN_INFO_H
+#define _SCREEN_INFO_H
+
+#include <linux/types.h>
+
+/*
+ * These are set up by the setup-routine at boot-time:
+ */
+
+struct screen_info {
+	__u8  orig_x;		/* 0x00 */
+	__u8  orig_y;		/* 0x01 */
+	__u16 ext_mem_k;	/* 0x02 */
+	__u16 orig_video_page;	/* 0x04 */
+	__u8  orig_video_mode;	/* 0x06 */
+	__u8  orig_video_cols;	/* 0x07 */
+	__u8  flags;		/* 0x08 */
+	__u8  unused2;		/* 0x09 */
+	__u16 orig_video_ega_bx;/* 0x0a */
+	__u16 unused3;		/* 0x0c */
+	__u8  orig_video_lines;	/* 0x0e */
+	__u8  orig_video_isVGA;	/* 0x0f */
+	__u16 orig_video_points;/* 0x10 */
+
+	/* VESA graphic mode -- linear frame buffer */
+	__u16 lfb_width;	/* 0x12 */
+	__u16 lfb_height;	/* 0x14 */
+	__u16 lfb_depth;	/* 0x16 */
+	__u32 lfb_base;		/* 0x18 */
+	__u32 lfb_size;		/* 0x1c */
+	__u16 cl_magic, cl_offset; /* 0x20 */
+	__u16 lfb_linelength;	/* 0x24 */
+	__u8  red_size;		/* 0x26 */
+	__u8  red_pos;		/* 0x27 */
+	__u8  green_size;	/* 0x28 */
+	__u8  green_pos;	/* 0x29 */
+	__u8  blue_size;	/* 0x2a */
+	__u8  blue_pos;		/* 0x2b */
+	__u8  rsvd_size;	/* 0x2c */
+	__u8  rsvd_pos;		/* 0x2d */
+	__u16 vesapm_seg;	/* 0x2e */
+	__u16 vesapm_off;	/* 0x30 */
+	__u16 pages;		/* 0x32 */
+	__u16 vesa_attributes;	/* 0x34 */
+	__u32 capabilities;     /* 0x36 */
+	__u8  _reserved[6];	/* 0x3a */
+} __attribute__((packed));
+
+#define VIDEO_TYPE_MDA		0x10	/* Monochrome Text Display	*/
+#define VIDEO_TYPE_CGA		0x11	/* CGA Display 			*/
+#define VIDEO_TYPE_EGAM		0x20	/* EGA/VGA in Monochrome Mode	*/
+#define VIDEO_TYPE_EGAC		0x21	/* EGA in Color Mode		*/
+#define VIDEO_TYPE_VGAC		0x22	/* VGA+ in Color Mode		*/
+#define VIDEO_TYPE_VLFB		0x23	/* VESA VGA in graphic mode	*/
+
+#define VIDEO_TYPE_PICA_S3	0x30	/* ACER PICA-61 local S3 video	*/
+#define VIDEO_TYPE_MIPS_G364	0x31    /* MIPS Magnum 4000 G364 video  */
+#define VIDEO_TYPE_SGI          0x33    /* Various SGI graphics hardware */
+
+#define VIDEO_TYPE_TGAC		0x40	/* DEC TGA */
+
+#define VIDEO_TYPE_SUN          0x50    /* Sun frame buffer. */
+#define VIDEO_TYPE_SUNPCI       0x51    /* Sun PCI based frame buffer. */
+
+#define VIDEO_TYPE_PMAC		0x60	/* PowerMacintosh frame buffer. */
+
+#define VIDEO_TYPE_EFI		0x70	/* EFI graphic mode		*/
+
+#define VIDEO_FLAGS_NOCURSOR	(1 << 0) /* The video mode has no cursor set */
+
+#ifdef __KERNEL__
+extern struct screen_info screen_info;
+
+#define ORIG_X			(screen_info.orig_x)
+#define ORIG_Y			(screen_info.orig_y)
+#define ORIG_VIDEO_MODE		(screen_info.orig_video_mode)
+#define ORIG_VIDEO_COLS 	(screen_info.orig_video_cols)
+#define ORIG_VIDEO_EGA_BX	(screen_info.orig_video_ega_bx)
+#define ORIG_VIDEO_LINES	(screen_info.orig_video_lines)
+#define ORIG_VIDEO_ISVGA	(screen_info.orig_video_isVGA)
+#define ORIG_VIDEO_POINTS       (screen_info.orig_video_points)
+#endif /* __KERNEL__ */
+
+#endif /* _SCREEN_INFO_H */
diff --git a/include/linux/sctp.h b/include/linux/sctp.h
new file mode 100644
index 00000000..c11a2870
--- /dev/null
+++ b/include/linux/sctp.h
@@ -0,0 +1,711 @@
+/* SCTP kernel reference Implementation
+ * (C) Copyright IBM Corp. 2001, 2004
+ * Copyright (c) 1999-2000 Cisco, Inc.
+ * Copyright (c) 1999-2001 Motorola, Inc.
+ * Copyright (c) 2001 Intel Corp.
+ * Copyright (c) 2001 Nokia, Inc.
+ * Copyright (c) 2001 La Monte H.P. Yarroll
+ *
+ * This file is part of the SCTP kernel reference Implementation
+ *
+ * Various protocol defined structures.
+ *
+ * This SCTP implementation is free software;
+ * you can redistribute it and/or modify it under the terms of
+ * the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This SCTP implementation is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ *                 ************************
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with GNU CC; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ * Please send any bug reports or fixes you make to the
+ * email address(es):
+ *    lksctp developers <lksctp-developerst@lists.sourceforge.net>
+ *
+ * Or submit a bug report through the following website:
+ *    http://www.sf.net/projects/lksctp
+ *
+ * Written or modified by:
+ *    La Monte H.P. Yarroll <piggy@acm.org>
+ *    Karl Knutson <karl@athena.chicago.il.us>
+ *    Jon Grimm <jgrimm@us.ibm.com>
+ *    Xingang Guo <xingang.guo@intel.com>
+ *    randall@sctp.chicago.il.us
+ *    kmorneau@cisco.com
+ *    qxie1@email.mot.com
+ *    Sridhar Samudrala <sri@us.ibm.com>
+ *    Kevin Gao <kevin.gao@intel.com>
+ *
+ * Any bugs reported given to us we will try to fix... any fixes shared will
+ * be incorporated into the next SCTP release.
+ */
+#ifndef __LINUX_SCTP_H__
+#define __LINUX_SCTP_H__
+
+#include <linux/in.h>		/* We need in_addr.  */
+#include <linux/in6.h>		/* We need in6_addr.  */
+
+
+/* Section 3.1.  SCTP Common Header Format */
+typedef struct sctphdr {
+	__be16 source;
+	__be16 dest;
+	__be32 vtag;
+	__le32 checksum;
+} __packed sctp_sctphdr_t;
+
+#ifdef __KERNEL__
+#include <linux/skbuff.h>
+
+static inline struct sctphdr *sctp_hdr(const struct sk_buff *skb)
+{
+	return (struct sctphdr *)skb_transport_header(skb);
+}
+#endif
+
+/* Section 3.2.  Chunk Field Descriptions. */
+typedef struct sctp_chunkhdr {
+	__u8 type;
+	__u8 flags;
+	__be16 length;
+} __packed sctp_chunkhdr_t;
+
+
+/* Section 3.2.  Chunk Type Values.
+ * [Chunk Type] identifies the type of information contained in the Chunk
+ * Value field. It takes a value from 0 to 254. The value of 255 is
+ * reserved for future use as an extension field.
+ */
+typedef enum {
+	SCTP_CID_DATA			= 0,
+        SCTP_CID_INIT			= 1,
+        SCTP_CID_INIT_ACK		= 2,
+        SCTP_CID_SACK			= 3,
+        SCTP_CID_HEARTBEAT		= 4,
+        SCTP_CID_HEARTBEAT_ACK		= 5,
+        SCTP_CID_ABORT			= 6,
+        SCTP_CID_SHUTDOWN		= 7,
+        SCTP_CID_SHUTDOWN_ACK		= 8,
+        SCTP_CID_ERROR			= 9,
+        SCTP_CID_COOKIE_ECHO		= 10,
+        SCTP_CID_COOKIE_ACK	        = 11,
+        SCTP_CID_ECN_ECNE		= 12,
+        SCTP_CID_ECN_CWR		= 13,
+        SCTP_CID_SHUTDOWN_COMPLETE	= 14,
+
+	/* AUTH Extension Section 4.1 */
+	SCTP_CID_AUTH			= 0x0F,
+
+	/* PR-SCTP Sec 3.2 */
+	SCTP_CID_FWD_TSN		= 0xC0,
+
+	/* Use hex, as defined in ADDIP sec. 3.1 */
+	SCTP_CID_ASCONF			= 0xC1,
+	SCTP_CID_ASCONF_ACK		= 0x80,
+} sctp_cid_t; /* enum */
+
+
+/* Section 3.2
+ *  Chunk Types are encoded such that the highest-order two bits specify
+ *  the action that must be taken if the processing endpoint does not
+ *  recognize the Chunk Type.
+ */
+typedef enum {
+	SCTP_CID_ACTION_DISCARD     = 0x00,
+	SCTP_CID_ACTION_DISCARD_ERR = 0x40,
+	SCTP_CID_ACTION_SKIP        = 0x80,
+	SCTP_CID_ACTION_SKIP_ERR    = 0xc0,
+} sctp_cid_action_t;
+
+enum { SCTP_CID_ACTION_MASK = 0xc0, };
+
+/* This flag is used in Chunk Flags for ABORT and SHUTDOWN COMPLETE.
+ *
+ * 3.3.7 Abort Association (ABORT) (6):
+ *    The T bit is set to 0 if the sender had a TCB that it destroyed.
+ *    If the sender did not have a TCB it should set this bit to 1.
+ */
+enum { SCTP_CHUNK_FLAG_T = 0x01 };
+
+/*
+ *  Set the T bit
+ *
+ *      0                   1                   2                   3
+ *      0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ *     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *     |   Type = 14   |Reserved     |T|      Length = 4               |
+ *     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ * Chunk Flags: 8 bits
+ *
+ *   Reserved:  7 bits
+ *     Set to 0 on transmit and ignored on receipt.
+ *
+ *   T bit:  1 bit
+ *     The T bit is set to 0 if the sender had a TCB that it destroyed. If
+ *     the sender did NOT have a TCB it should set this bit to 1.
+ *
+ * Note: Special rules apply to this chunk for verification, please
+ * see Section 8.5.1 for details.
+ */
+
+#define sctp_test_T_bit(c)    ((c)->chunk_hdr->flags & SCTP_CHUNK_FLAG_T)
+
+/* RFC 2960
+ * Section 3.2.1 Optional/Variable-length Parmaeter Format.
+ */
+
+typedef struct sctp_paramhdr {
+	__be16 type;
+	__be16 length;
+} __packed sctp_paramhdr_t;
+
+typedef enum {
+
+	/* RFC 2960 Section 3.3.5 */
+	SCTP_PARAM_HEARTBEAT_INFO		= cpu_to_be16(1),
+	/* RFC 2960 Section 3.3.2.1 */
+	SCTP_PARAM_IPV4_ADDRESS			= cpu_to_be16(5),
+	SCTP_PARAM_IPV6_ADDRESS			= cpu_to_be16(6),
+	SCTP_PARAM_STATE_COOKIE			= cpu_to_be16(7),
+	SCTP_PARAM_UNRECOGNIZED_PARAMETERS	= cpu_to_be16(8),
+	SCTP_PARAM_COOKIE_PRESERVATIVE		= cpu_to_be16(9),
+	SCTP_PARAM_HOST_NAME_ADDRESS		= cpu_to_be16(11),
+	SCTP_PARAM_SUPPORTED_ADDRESS_TYPES	= cpu_to_be16(12),
+	SCTP_PARAM_ECN_CAPABLE			= cpu_to_be16(0x8000),
+
+	/* AUTH Extension Section 3 */
+	SCTP_PARAM_RANDOM			= cpu_to_be16(0x8002),
+	SCTP_PARAM_CHUNKS			= cpu_to_be16(0x8003),
+	SCTP_PARAM_HMAC_ALGO			= cpu_to_be16(0x8004),
+
+	/* Add-IP: Supported Extensions, Section 4.2 */
+	SCTP_PARAM_SUPPORTED_EXT	= cpu_to_be16(0x8008),
+
+	/* PR-SCTP Sec 3.1 */
+	SCTP_PARAM_FWD_TSN_SUPPORT	= cpu_to_be16(0xc000),
+
+	/* Add-IP Extension. Section 3.2 */
+	SCTP_PARAM_ADD_IP		= cpu_to_be16(0xc001),
+	SCTP_PARAM_DEL_IP		= cpu_to_be16(0xc002),
+	SCTP_PARAM_ERR_CAUSE		= cpu_to_be16(0xc003),
+	SCTP_PARAM_SET_PRIMARY		= cpu_to_be16(0xc004),
+	SCTP_PARAM_SUCCESS_REPORT	= cpu_to_be16(0xc005),
+	SCTP_PARAM_ADAPTATION_LAYER_IND = cpu_to_be16(0xc006),
+
+} sctp_param_t; /* enum */
+
+
+/* RFC 2960 Section 3.2.1
+ *  The Parameter Types are encoded such that the highest-order two bits
+ *  specify the action that must be taken if the processing endpoint does
+ *  not recognize the Parameter Type.
+ *
+ */
+typedef enum {
+	SCTP_PARAM_ACTION_DISCARD     = cpu_to_be16(0x0000),
+	SCTP_PARAM_ACTION_DISCARD_ERR = cpu_to_be16(0x4000),
+	SCTP_PARAM_ACTION_SKIP        = cpu_to_be16(0x8000),
+	SCTP_PARAM_ACTION_SKIP_ERR    = cpu_to_be16(0xc000),
+} sctp_param_action_t;
+
+enum { SCTP_PARAM_ACTION_MASK = cpu_to_be16(0xc000), };
+
+/* RFC 2960 Section 3.3.1 Payload Data (DATA) (0) */
+
+typedef struct sctp_datahdr {
+	__be32 tsn;
+	__be16 stream;
+	__be16 ssn;
+	__be32 ppid;
+	__u8  payload[0];
+} __packed sctp_datahdr_t;
+
+typedef struct sctp_data_chunk {
+        sctp_chunkhdr_t chunk_hdr;
+        sctp_datahdr_t  data_hdr;
+} __packed sctp_data_chunk_t;
+
+/* DATA Chuck Specific Flags */
+enum {
+	SCTP_DATA_MIDDLE_FRAG	= 0x00,
+	SCTP_DATA_LAST_FRAG	= 0x01,
+	SCTP_DATA_FIRST_FRAG	= 0x02,
+	SCTP_DATA_NOT_FRAG	= 0x03,
+	SCTP_DATA_UNORDERED	= 0x04,
+	SCTP_DATA_SACK_IMM	= 0x08,
+};
+enum { SCTP_DATA_FRAG_MASK = 0x03, };
+
+
+/* RFC 2960 Section 3.3.2 Initiation (INIT) (1)
+ *
+ *  This chunk is used to initiate a SCTP association between two
+ *  endpoints.
+ */
+typedef struct sctp_inithdr {
+	__be32 init_tag;
+	__be32 a_rwnd;
+	__be16 num_outbound_streams;
+	__be16 num_inbound_streams;
+	__be32 initial_tsn;
+	__u8  params[0];
+} __packed sctp_inithdr_t;
+
+typedef struct sctp_init_chunk {
+	sctp_chunkhdr_t chunk_hdr;
+	sctp_inithdr_t init_hdr;
+} __packed sctp_init_chunk_t;
+
+
+/* Section 3.3.2.1. IPv4 Address Parameter (5) */
+typedef struct sctp_ipv4addr_param {
+	sctp_paramhdr_t param_hdr;
+	struct in_addr  addr;
+} __packed sctp_ipv4addr_param_t;
+
+/* Section 3.3.2.1. IPv6 Address Parameter (6) */
+typedef struct sctp_ipv6addr_param {
+	sctp_paramhdr_t param_hdr;
+	struct in6_addr addr;
+} __packed sctp_ipv6addr_param_t;
+
+/* Section 3.3.2.1 Cookie Preservative (9) */
+typedef struct sctp_cookie_preserve_param {
+	sctp_paramhdr_t param_hdr;
+	__be32          lifespan_increment;
+} __packed sctp_cookie_preserve_param_t;
+
+/* Section 3.3.2.1 Host Name Address (11) */
+typedef struct sctp_hostname_param {
+	sctp_paramhdr_t param_hdr;
+	uint8_t hostname[0];
+} __packed sctp_hostname_param_t;
+
+/* Section 3.3.2.1 Supported Address Types (12) */
+typedef struct sctp_supported_addrs_param {
+	sctp_paramhdr_t param_hdr;
+	__be16 types[0];
+} __packed sctp_supported_addrs_param_t;
+
+/* Appendix A. ECN Capable (32768) */
+typedef struct sctp_ecn_capable_param {
+	sctp_paramhdr_t param_hdr;
+} __packed sctp_ecn_capable_param_t;
+
+/* ADDIP Section 3.2.6 Adaptation Layer Indication */
+typedef struct sctp_adaptation_ind_param {
+	struct sctp_paramhdr param_hdr;
+	__be32 adaptation_ind;
+} __packed sctp_adaptation_ind_param_t;
+
+/* ADDIP Section 4.2.7 Supported Extensions Parameter */
+typedef struct sctp_supported_ext_param {
+	struct sctp_paramhdr param_hdr;
+	__u8 chunks[0];
+} __packed sctp_supported_ext_param_t;
+
+/* AUTH Section 3.1 Random */
+typedef struct sctp_random_param {
+	sctp_paramhdr_t param_hdr;
+	__u8 random_val[0];
+} __packed sctp_random_param_t;
+
+/* AUTH Section 3.2 Chunk List */
+typedef struct sctp_chunks_param {
+	sctp_paramhdr_t param_hdr;
+	__u8 chunks[0];
+} __packed sctp_chunks_param_t;
+
+/* AUTH Section 3.3 HMAC Algorithm */
+typedef struct sctp_hmac_algo_param {
+	sctp_paramhdr_t param_hdr;
+	__be16 hmac_ids[0];
+} __packed sctp_hmac_algo_param_t;
+
+/* RFC 2960.  Section 3.3.3 Initiation Acknowledgement (INIT ACK) (2):
+ *   The INIT ACK chunk is used to acknowledge the initiation of an SCTP
+ *   association.
+ */
+typedef sctp_init_chunk_t sctp_initack_chunk_t;
+
+/* Section 3.3.3.1 State Cookie (7) */
+typedef struct sctp_cookie_param {
+	sctp_paramhdr_t p;
+	__u8 body[0];
+} __packed sctp_cookie_param_t;
+
+/* Section 3.3.3.1 Unrecognized Parameters (8) */
+typedef struct sctp_unrecognized_param {
+	sctp_paramhdr_t param_hdr;
+	sctp_paramhdr_t unrecognized;
+} __packed sctp_unrecognized_param_t;
+
+
+
+/*
+ * 3.3.4 Selective Acknowledgement (SACK) (3):
+ *
+ *  This chunk is sent to the peer endpoint to acknowledge received DATA
+ *  chunks and to inform the peer endpoint of gaps in the received
+ *  subsequences of DATA chunks as represented by their TSNs.
+ */
+
+typedef struct sctp_gap_ack_block {
+	__be16 start;
+	__be16 end;
+} __packed sctp_gap_ack_block_t;
+
+typedef __be32 sctp_dup_tsn_t;
+
+typedef union {
+	sctp_gap_ack_block_t	gab;
+        sctp_dup_tsn_t		dup;
+} sctp_sack_variable_t;
+
+typedef struct sctp_sackhdr {
+	__be32 cum_tsn_ack;
+	__be32 a_rwnd;
+	__be16 num_gap_ack_blocks;
+	__be16 num_dup_tsns;
+	sctp_sack_variable_t variable[0];
+} __packed sctp_sackhdr_t;
+
+typedef struct sctp_sack_chunk {
+	sctp_chunkhdr_t chunk_hdr;
+	sctp_sackhdr_t sack_hdr;
+} __packed sctp_sack_chunk_t;
+
+
+/* RFC 2960.  Section 3.3.5 Heartbeat Request (HEARTBEAT) (4):
+ *
+ *  An endpoint should send this chunk to its peer endpoint to probe the
+ *  reachability of a particular destination transport address defined in
+ *  the present association.
+ */
+
+typedef struct sctp_heartbeathdr {
+	sctp_paramhdr_t info;
+} __packed sctp_heartbeathdr_t;
+
+typedef struct sctp_heartbeat_chunk {
+	sctp_chunkhdr_t chunk_hdr;
+	sctp_heartbeathdr_t hb_hdr;
+} __packed sctp_heartbeat_chunk_t;
+
+
+/* For the abort and shutdown ACK we must carry the init tag in the
+ * common header. Just the common header is all that is needed with a
+ * chunk descriptor.
+ */
+typedef struct sctp_abort_chunk {
+        sctp_chunkhdr_t uh;
+} __packed sctp_abort_chunk_t;
+
+
+/* For the graceful shutdown we must carry the tag (in common header)
+ * and the highest consecutive acking value.
+ */
+typedef struct sctp_shutdownhdr {
+	__be32 cum_tsn_ack;
+} __packed sctp_shutdownhdr_t;
+
+struct sctp_shutdown_chunk_t {
+        sctp_chunkhdr_t    chunk_hdr;
+        sctp_shutdownhdr_t shutdown_hdr;
+} __packed;
+
+/* RFC 2960.  Section 3.3.10 Operation Error (ERROR) (9) */
+
+typedef struct sctp_errhdr {
+	__be16 cause;
+	__be16 length;
+	__u8  variable[0];
+} __packed sctp_errhdr_t;
+
+typedef struct sctp_operr_chunk {
+        sctp_chunkhdr_t chunk_hdr;
+	sctp_errhdr_t   err_hdr;
+} __packed sctp_operr_chunk_t;
+
+/* RFC 2960 3.3.10 - Operation Error
+ *
+ * Cause Code: 16 bits (unsigned integer)
+ *
+ *     Defines the type of error conditions being reported.
+ *    Cause Code
+ *     Value           Cause Code
+ *     ---------      ----------------
+ *      1              Invalid Stream Identifier
+ *      2              Missing Mandatory Parameter
+ *      3              Stale Cookie Error
+ *      4              Out of Resource
+ *      5              Unresolvable Address
+ *      6              Unrecognized Chunk Type
+ *      7              Invalid Mandatory Parameter
+ *      8              Unrecognized Parameters
+ *      9              No User Data
+ *     10              Cookie Received While Shutting Down
+ */
+typedef enum {
+
+	SCTP_ERROR_NO_ERROR	   = cpu_to_be16(0x00),
+	SCTP_ERROR_INV_STRM	   = cpu_to_be16(0x01),
+	SCTP_ERROR_MISS_PARAM 	   = cpu_to_be16(0x02),
+	SCTP_ERROR_STALE_COOKIE	   = cpu_to_be16(0x03),
+	SCTP_ERROR_NO_RESOURCE 	   = cpu_to_be16(0x04),
+	SCTP_ERROR_DNS_FAILED      = cpu_to_be16(0x05),
+	SCTP_ERROR_UNKNOWN_CHUNK   = cpu_to_be16(0x06),
+	SCTP_ERROR_INV_PARAM       = cpu_to_be16(0x07),
+	SCTP_ERROR_UNKNOWN_PARAM   = cpu_to_be16(0x08),
+	SCTP_ERROR_NO_DATA         = cpu_to_be16(0x09),
+	SCTP_ERROR_COOKIE_IN_SHUTDOWN = cpu_to_be16(0x0a),
+
+
+	/* SCTP Implementation Guide:
+	 *  11  Restart of an association with new addresses
+	 *  12  User Initiated Abort
+	 *  13  Protocol Violation
+	 */
+
+	SCTP_ERROR_RESTART         = cpu_to_be16(0x0b),
+	SCTP_ERROR_USER_ABORT      = cpu_to_be16(0x0c),
+	SCTP_ERROR_PROTO_VIOLATION = cpu_to_be16(0x0d),
+
+	/* ADDIP Section 3.3  New Error Causes
+	 *
+	 * Four new Error Causes are added to the SCTP Operational Errors,
+	 * primarily for use in the ASCONF-ACK chunk.
+	 *
+	 * Value          Cause Code
+	 * ---------      ----------------
+	 * 0x00A0          Request to Delete Last Remaining IP Address.
+	 * 0x00A1          Operation Refused Due to Resource Shortage.
+	 * 0x00A2          Request to Delete Source IP Address.
+	 * 0x00A3          Association Aborted due to illegal ASCONF-ACK
+	 * 0x00A4          Request refused - no authorization.
+	 */
+	SCTP_ERROR_DEL_LAST_IP	= cpu_to_be16(0x00A0),
+	SCTP_ERROR_RSRC_LOW	= cpu_to_be16(0x00A1),
+	SCTP_ERROR_DEL_SRC_IP	= cpu_to_be16(0x00A2),
+	SCTP_ERROR_ASCONF_ACK   = cpu_to_be16(0x00A3),
+	SCTP_ERROR_REQ_REFUSED	= cpu_to_be16(0x00A4),
+
+	/* AUTH Section 4.  New Error Cause
+	 *
+	 * This section defines a new error cause that will be sent if an AUTH
+	 * chunk is received with an unsupported HMAC identifier.
+	 * illustrates the new error cause.
+	 *
+	 * Cause Code      Error Cause Name
+	 * --------------------------------------------------------------
+	 * 0x0105          Unsupported HMAC Identifier
+	 */
+	 SCTP_ERROR_UNSUP_HMAC	= cpu_to_be16(0x0105)
+} sctp_error_t;
+
+
+
+/* RFC 2960.  Appendix A.  Explicit Congestion Notification.
+ *   Explicit Congestion Notification Echo (ECNE) (12)
+ */
+typedef struct sctp_ecnehdr {
+	__be32 lowest_tsn;
+} sctp_ecnehdr_t;
+
+typedef struct sctp_ecne_chunk {
+	sctp_chunkhdr_t chunk_hdr;
+	sctp_ecnehdr_t ence_hdr;
+} __packed sctp_ecne_chunk_t;
+
+/* RFC 2960.  Appendix A.  Explicit Congestion Notification.
+ *   Congestion Window Reduced (CWR) (13)
+ */
+typedef struct sctp_cwrhdr {
+	__be32 lowest_tsn;
+} sctp_cwrhdr_t;
+
+typedef struct sctp_cwr_chunk {
+	sctp_chunkhdr_t chunk_hdr;
+	sctp_cwrhdr_t cwr_hdr;
+} __packed sctp_cwr_chunk_t;
+
+/* PR-SCTP
+ * 3.2 Forward Cumulative TSN Chunk Definition (FORWARD TSN)
+ *
+ * Forward Cumulative TSN chunk has the following format:
+ *
+ *        0                   1                   2                   3
+ *        0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ *      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *      |   Type = 192  |  Flags = 0x00 |        Length = Variable      |
+ *      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *      |                      New Cumulative TSN                       |
+ *      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *      |         Stream-1              |       Stream Sequence-1       |
+ *      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *      \                                                               /
+ *      /                                                               \
+ *      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *      |         Stream-N              |       Stream Sequence-N       |
+ *      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ *      Chunk Flags:
+ *
+ *        Set to all zeros on transmit and ignored on receipt.
+ *
+ *      New Cumulative TSN: 32 bit u_int
+ *
+ *       This indicates the new cumulative TSN to the data receiver. Upon
+ *       the reception of this value, the data receiver MUST consider
+ *       any missing TSNs earlier than or equal to this value as received
+ *       and stop reporting them as gaps in any subsequent SACKs.
+ *
+ *      Stream-N: 16 bit u_int
+ *
+ *       This field holds a stream number that was skipped by this
+ *       FWD-TSN.
+ *
+ *      Stream Sequence-N: 16 bit u_int
+ *       This field holds the sequence number associated with the stream
+ *       that was skipped. The stream sequence field holds the largest stream
+ *       sequence number in this stream being skipped.  The receiver of
+ *       the FWD-TSN's can use the Stream-N and Stream Sequence-N fields
+ *       to enable delivery of any stranded TSN's that remain on the stream
+ *       re-ordering queues. This field MUST NOT report TSN's corresponding
+ *       to DATA chunk that are marked as unordered. For ordered DATA
+ *       chunks this field MUST be filled in.
+ */
+struct sctp_fwdtsn_skip {
+	__be16 stream;
+	__be16 ssn;
+} __packed;
+
+struct sctp_fwdtsn_hdr {
+	__be32 new_cum_tsn;
+	struct sctp_fwdtsn_skip skip[0];
+} __packed;
+
+struct sctp_fwdtsn_chunk {
+	struct sctp_chunkhdr chunk_hdr;
+	struct sctp_fwdtsn_hdr fwdtsn_hdr;
+} __packed;
+
+
+/* ADDIP
+ * Section 3.1.1 Address Configuration Change Chunk (ASCONF)
+ *
+ * 	Serial Number: 32 bits (unsigned integer)
+ *	This value represents a Serial Number for the ASCONF Chunk. The
+ *	valid range of Serial Number is from 0 to 2^32-1.
+ *	Serial Numbers wrap back to 0 after reaching 2^32 -1.
+ *
+ *	Address Parameter: 8 or 20 bytes (depending on type)
+ *	The address is an address of the sender of the ASCONF chunk,
+ *	the address MUST be considered part of the association by the
+ *	peer endpoint. This field may be used by the receiver of the 
+ *	ASCONF to help in finding the association. This parameter MUST
+ *	be present in every ASCONF message i.e. it is a mandatory TLV
+ *	parameter.
+ *
+ *	ASCONF Parameter: TLV format
+ *	Each Address configuration change is represented by a TLV
+ *	parameter as defined in Section 3.2. One or more requests may
+ *	be present in an ASCONF Chunk.
+ *
+ * Section 3.1.2 Address Configuration Acknowledgement Chunk (ASCONF-ACK)
+ * 
+ *	Serial Number: 32 bits (unsigned integer)
+ *	This value represents the Serial Number for the received ASCONF
+ *	Chunk that is acknowledged by this chunk. This value is copied
+ *	from the received ASCONF Chunk. 
+ *
+ *	ASCONF Parameter Response: TLV format
+ *	The ASCONF Parameter Response is used in the ASCONF-ACK to
+ *	report status of ASCONF processing.
+ */
+typedef struct sctp_addip_param {
+	sctp_paramhdr_t	param_hdr;
+	__be32		crr_id;
+} __packed sctp_addip_param_t;
+
+typedef struct sctp_addiphdr {
+	__be32	serial;
+	__u8	params[0];
+} __packed sctp_addiphdr_t;
+
+typedef struct sctp_addip_chunk {
+	sctp_chunkhdr_t chunk_hdr;
+	sctp_addiphdr_t addip_hdr;
+} __packed sctp_addip_chunk_t;
+
+/* AUTH
+ * Section 4.1  Authentication Chunk (AUTH)
+ *
+ *   This chunk is used to hold the result of the HMAC calculation.
+ *
+ *    0                   1                   2                   3
+ *    0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ *   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *   | Type = 0x0F   |   Flags=0     |             Length            |
+ *   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *   |     Shared Key Identifier     |   HMAC Identifier             |
+ *   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *   |                                                               |
+ *   \                             HMAC                              /
+ *   /                                                               \
+ *   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ *   Type: 1 byte (unsigned integer)
+ *   	This value MUST be set to 0x0F for  all AUTH-chunks.
+ *
+ *   Flags: 1 byte (unsigned integer)
+ *	Set to zero on transmit and ignored on receipt.
+ *
+ *   Length: 2 bytes (unsigned integer)
+ *   	This value holds the length of the HMAC in bytes plus 8.
+ *
+ *  Shared Key Identifier: 2 bytes (unsigned integer)
+ *	This value describes which endpoint pair shared key is used.
+ *
+ *   HMAC Identifier: 2 bytes (unsigned integer)
+ *   	This value describes which message digest is being used.  Table 2
+ *	shows the currently defined values.
+ *
+ *    The following Table 2 shows the currently defined values for HMAC
+ *       identifiers.
+ *
+ *	 +-----------------+--------------------------+
+ *	 | HMAC Identifier | Message Digest Algorithm |
+ *	 +-----------------+--------------------------+
+ *	 | 0               | Reserved                 |
+ *	 | 1               | SHA-1 defined in [8]     |
+ *	 | 2               | Reserved                 |
+ *	 | 3               | SHA-256 defined in [8]   |
+ *	 +-----------------+--------------------------+
+ *
+ *
+ *   HMAC: n bytes (unsigned integer) This hold the result of the HMAC
+ *      calculation.
+ */
+typedef struct sctp_authhdr {
+	__be16 shkey_id;
+	__be16 hmac_id;
+	__u8   hmac[0];
+} __packed sctp_authhdr_t;
+
+typedef struct sctp_auth_chunk {
+	sctp_chunkhdr_t chunk_hdr;
+	sctp_authhdr_t auth_hdr;
+} __packed sctp_auth_chunk_t;
+
+#endif /* __LINUX_SCTP_H__ */
diff --git a/include/linux/scx200.h b/include/linux/scx200.h
new file mode 100644
index 00000000..de466e11
--- /dev/null
+++ b/include/linux/scx200.h
@@ -0,0 +1,51 @@
+/* linux/include/linux/scx200.h
+
+   Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
+
+   Defines for the National Semiconductor SCx200 Processors
+*/
+
+/* Interesting stuff for the National Semiconductor SCx200 CPU */
+
+extern unsigned scx200_cb_base;
+
+#define scx200_cb_present() (scx200_cb_base!=0)
+
+/* F0 PCI Header/Bridge Configuration Registers */
+#define SCx200_DOCCS_BASE 0x78	/* DOCCS Base Address Register */
+#define SCx200_DOCCS_CTRL 0x7c	/* DOCCS Control Register */
+
+/* GPIO Register Block */
+#define SCx200_GPIO_SIZE 0x2c	/* Size of GPIO register block */
+
+/* General Configuration Block */
+#define SCx200_CB_BASE_FIXED 0x9000	/* Base fixed at 0x9000 according to errata? */
+
+/* Watchdog Timer */
+#define SCx200_WDT_OFFSET 0x00	/* offset within configuration block */
+#define SCx200_WDT_SIZE 0x05	/* size */
+
+#define SCx200_WDT_WDTO 0x00	/* Time-Out Register */
+#define SCx200_WDT_WDCNFG 0x02	/* Configuration Register */
+#define SCx200_WDT_WDSTS 0x04	/* Status Register */
+#define SCx200_WDT_WDSTS_WDOVF (1<<0) /* Overflow bit */
+
+/* High Resolution Timer */
+#define SCx200_TIMER_OFFSET 0x08
+#define SCx200_TIMER_SIZE 0x06
+
+/* Clock Generators */
+#define SCx200_CLOCKGEN_OFFSET 0x10
+#define SCx200_CLOCKGEN_SIZE 0x10
+
+/* Pin Multiplexing and Miscellaneous Configuration Registers */
+#define SCx200_MISC_OFFSET 0x30
+#define SCx200_MISC_SIZE 0x10
+
+#define SCx200_PMR 0x30		/* Pin Multiplexing Register */
+#define SCx200_MCR 0x34		/* Miscellaneous Configuration Register */
+#define SCx200_INTSEL 0x38	/* Interrupt Selection Register */
+#define SCx200_IID 0x3c		/* IA On a Chip Identification Number Reg */
+#define SCx200_REV 0x3d		/* Revision Register */
+#define SCx200_CBA 0x3e		/* Configuration Base Address Register */
+#define SCx200_CBA_SCRATCH 0x64	/* Configuration Base Address Scratchpad */
diff --git a/include/linux/scx200_gpio.h b/include/linux/scx200_gpio.h
new file mode 100644
index 00000000..ece4e553
--- /dev/null
+++ b/include/linux/scx200_gpio.h
@@ -0,0 +1,88 @@
+u32 scx200_gpio_configure(unsigned index, u32 set, u32 clear);
+
+extern unsigned scx200_gpio_base;
+extern unsigned long scx200_gpio_shadow[2];
+extern struct nsc_gpio_ops scx200_gpio_ops;
+
+#define scx200_gpio_present() (scx200_gpio_base!=0)
+
+/* Definitions to make sure I do the same thing in all functions */
+#define __SCx200_GPIO_BANK unsigned bank = index>>5
+#define __SCx200_GPIO_IOADDR unsigned short ioaddr = scx200_gpio_base+0x10*bank
+#define __SCx200_GPIO_SHADOW unsigned long *shadow = scx200_gpio_shadow+bank
+#define __SCx200_GPIO_INDEX index &= 31
+
+#define __SCx200_GPIO_OUT __asm__ __volatile__("outsl":"=mS" (shadow):"d" (ioaddr), "0" (shadow))
+
+/* returns the value of the GPIO pin */
+
+static inline int scx200_gpio_get(unsigned index) {
+	__SCx200_GPIO_BANK;
+	__SCx200_GPIO_IOADDR + 0x04;
+	__SCx200_GPIO_INDEX;
+		
+	return (inl(ioaddr) & (1<<index)) ? 1 : 0;
+}
+
+/* return the value driven on the GPIO signal (the value that will be
+   driven if the GPIO is configured as an output, it might not be the
+   state of the GPIO right now if the GPIO is configured as an input) */
+
+static inline int scx200_gpio_current(unsigned index) {
+        __SCx200_GPIO_BANK;
+	__SCx200_GPIO_INDEX;
+		
+	return (scx200_gpio_shadow[bank] & (1<<index)) ? 1 : 0;
+}
+
+/* drive the GPIO signal high */
+
+static inline void scx200_gpio_set_high(unsigned index) {
+	__SCx200_GPIO_BANK;
+	__SCx200_GPIO_IOADDR;
+	__SCx200_GPIO_SHADOW;
+	__SCx200_GPIO_INDEX;
+	set_bit(index, shadow);	/* __set_bit()? */
+	__SCx200_GPIO_OUT;
+}
+
+/* drive the GPIO signal low */
+
+static inline void scx200_gpio_set_low(unsigned index) {
+	__SCx200_GPIO_BANK;
+	__SCx200_GPIO_IOADDR;
+	__SCx200_GPIO_SHADOW;
+	__SCx200_GPIO_INDEX;
+	clear_bit(index, shadow); /* __clear_bit()? */
+	__SCx200_GPIO_OUT;
+}
+
+/* drive the GPIO signal to state */
+
+static inline void scx200_gpio_set(unsigned index, int state) {
+	__SCx200_GPIO_BANK;
+	__SCx200_GPIO_IOADDR;
+	__SCx200_GPIO_SHADOW;
+	__SCx200_GPIO_INDEX;
+	if (state)
+		set_bit(index, shadow);
+	else
+		clear_bit(index, shadow);
+	__SCx200_GPIO_OUT;
+}
+
+/* toggle the GPIO signal */
+static inline void scx200_gpio_change(unsigned index) {
+	__SCx200_GPIO_BANK;
+	__SCx200_GPIO_IOADDR;
+	__SCx200_GPIO_SHADOW;
+	__SCx200_GPIO_INDEX;
+	change_bit(index, shadow);
+	__SCx200_GPIO_OUT;
+}
+
+#undef __SCx200_GPIO_BANK
+#undef __SCx200_GPIO_IOADDR
+#undef __SCx200_GPIO_SHADOW
+#undef __SCx200_GPIO_INDEX
+#undef __SCx200_GPIO_OUT
diff --git a/include/linux/sdla.h b/include/linux/sdla.h
new file mode 100644
index 00000000..9995c7fc
--- /dev/null
+++ b/include/linux/sdla.h
@@ -0,0 +1,335 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the Frame relay interface.
+ *
+ * Version:	@(#)if_ifrad.h	0.20	13 Apr 96
+ *
+ * Author:	Mike McLagan <mike.mclagan@linux.org>
+ *
+ * Changes:
+ *		0.15	Mike McLagan	Structure packing
+ *
+ *		0.20	Mike McLagan	New flags for S508 buffer handling
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+#ifndef SDLA_H
+#define SDLA_H
+
+/* adapter type */
+#define SDLA_TYPES
+#define SDLA_S502A			5020
+#define SDLA_S502E			5021
+#define SDLA_S503			5030
+#define SDLA_S507			5070
+#define SDLA_S508			5080
+#define SDLA_S509			5090
+#define SDLA_UNKNOWN			-1
+
+/* port selection flags for the S508 */
+#define SDLA_S508_PORT_V35		0x00
+#define SDLA_S508_PORT_RS232		0x02
+
+/* Z80 CPU speeds */
+#define SDLA_CPU_3M			0x00
+#define SDLA_CPU_5M			0x01
+#define SDLA_CPU_7M			0x02
+#define SDLA_CPU_8M			0x03
+#define SDLA_CPU_10M			0x04
+#define SDLA_CPU_16M			0x05
+#define SDLA_CPU_12M			0x06
+
+/* some private IOCTLs */
+#define SDLA_IDENTIFY			(FRAD_LAST_IOCTL + 1)
+#define SDLA_CPUSPEED			(FRAD_LAST_IOCTL + 2)
+#define SDLA_PROTOCOL			(FRAD_LAST_IOCTL + 3)
+
+#define SDLA_CLEARMEM			(FRAD_LAST_IOCTL + 4)
+#define SDLA_WRITEMEM			(FRAD_LAST_IOCTL + 5)
+#define SDLA_READMEM			(FRAD_LAST_IOCTL + 6)
+
+struct sdla_mem {
+   int  addr;
+   int  len;
+   void __user *data;
+};
+
+#define SDLA_START			(FRAD_LAST_IOCTL + 7)
+#define SDLA_STOP			(FRAD_LAST_IOCTL + 8)
+
+/* some offsets in the Z80's memory space */
+#define SDLA_NMIADDR			0x0000
+#define SDLA_CONF_ADDR			0x0010
+#define SDLA_S502A_NMIADDR		0x0066
+#define SDLA_CODE_BASEADDR		0x0100
+#define SDLA_WINDOW_SIZE		0x2000
+#define SDLA_ADDR_MASK			0x1FFF
+
+/* largest handleable block of data */
+#define SDLA_MAX_DATA			4080
+#define SDLA_MAX_MTU			4072	/* MAX_DATA - sizeof(fradhdr) */
+#define SDLA_MAX_DLCI			24
+
+/* this should be the same as frad_conf */
+struct sdla_conf {
+   short station;
+   short config;
+   short kbaud;
+   short clocking;
+   short max_frm;
+   short T391;
+   short T392;
+   short N391;
+   short N392;
+   short N393;
+   short CIR_fwd;
+   short Bc_fwd;
+   short Be_fwd;
+   short CIR_bwd;
+   short Bc_bwd;
+   short Be_bwd;
+};
+
+/* this should be the same as dlci_conf */
+struct sdla_dlci_conf {
+   short config;
+   short CIR_fwd;
+   short Bc_fwd;
+   short Be_fwd;
+   short CIR_bwd;
+   short Bc_bwd;
+   short Be_bwd; 
+   short Tc_fwd;
+   short Tc_bwd;
+   short Tf_max;
+   short Tb_max;
+};
+
+#ifdef __KERNEL__
+
+/* important Z80 window addresses */
+#define SDLA_CONTROL_WND		0xE000
+
+#define SDLA_502_CMD_BUF		0xEF60
+#define SDLA_502_RCV_BUF		0xA900
+#define	SDLA_502_TXN_AVAIL		0xFFF1
+#define SDLA_502_RCV_AVAIL		0xFFF2
+#define SDLA_502_EVENT_FLAGS		0xFFF3
+#define SDLA_502_MDM_STATUS		0xFFF4
+#define SDLA_502_IRQ_INTERFACE		0xFFFD
+#define SDLA_502_IRQ_PERMISSION		0xFFFE
+#define SDLA_502_DATA_OFS		0x0010
+
+#define SDLA_508_CMD_BUF		0xE000
+#define SDLA_508_TXBUF_INFO		0xF100
+#define SDLA_508_RXBUF_INFO		0xF120
+#define SDLA_508_EVENT_FLAGS		0xF003
+#define SDLA_508_MDM_STATUS		0xF004
+#define SDLA_508_IRQ_INTERFACE		0xF010
+#define SDLA_508_IRQ_PERMISSION		0xF011
+#define SDLA_508_TSE_OFFSET		0xF012
+
+/* Event flags */
+#define SDLA_EVENT_STATUS		0x01
+#define SDLA_EVENT_DLCI_STATUS		0x02
+#define SDLA_EVENT_BAD_DLCI		0x04
+#define SDLA_EVENT_LINK_DOWN		0x40
+
+/* IRQ Trigger flags */
+#define SDLA_INTR_RX			0x01
+#define SDLA_INTR_TX			0x02
+#define SDLA_INTR_MODEM			0x04
+#define SDLA_INTR_COMPLETE		0x08
+#define SDLA_INTR_STATUS		0x10
+#define SDLA_INTR_TIMER			0x20
+
+/* DLCI status bits */
+#define SDLA_DLCI_DELETED		0x01
+#define SDLA_DLCI_ACTIVE		0x02
+#define SDLA_DLCI_WAITING		0x04
+#define SDLA_DLCI_NEW			0x08
+#define SDLA_DLCI_INCLUDED		0x40
+
+/* valid command codes */
+#define	SDLA_INFORMATION_WRITE		0x01
+#define	SDLA_INFORMATION_READ		0x02
+#define SDLA_ISSUE_IN_CHANNEL_SIGNAL	0x03
+#define	SDLA_SET_DLCI_CONFIGURATION	0x10
+#define	SDLA_READ_DLCI_CONFIGURATION	0x11
+#define	SDLA_DISABLE_COMMUNICATIONS	0x12
+#define	SDLA_ENABLE_COMMUNICATIONS	0x13
+#define	SDLA_READ_DLC_STATUS		0x14
+#define	SDLA_READ_DLC_STATISTICS	0x15
+#define	SDLA_FLUSH_DLC_STATISTICS	0x16
+#define	SDLA_LIST_ACTIVE_DLCI		0x17
+#define	SDLA_FLUSH_INFORMATION_BUFFERS	0x18
+#define	SDLA_ADD_DLCI			0x20
+#define	SDLA_DELETE_DLCI		0x21
+#define	SDLA_ACTIVATE_DLCI		0x22
+#define	SDLA_DEACTIVATE_DLCI		0x23
+#define	SDLA_READ_MODEM_STATUS		0x30
+#define	SDLA_SET_MODEM_STATUS		0x31
+#define	SDLA_READ_COMMS_ERR_STATS	0x32
+#define SDLA_FLUSH_COMMS_ERR_STATS	0x33
+#define	SDLA_READ_CODE_VERSION		0x40
+#define SDLA_SET_IRQ_TRIGGER		0x50
+#define SDLA_GET_IRQ_TRIGGER		0x51
+
+/* In channel signal types */
+#define SDLA_ICS_LINK_VERIFY		0x02
+#define SDLA_ICS_STATUS_ENQ		0x03
+
+/* modem status flags */
+#define SDLA_MODEM_DTR_HIGH		0x01
+#define SDLA_MODEM_RTS_HIGH		0x02
+#define SDLA_MODEM_DCD_HIGH		0x08
+#define SDLA_MODEM_CTS_HIGH		0x20
+
+/* used for RET_MODEM interpretation */
+#define SDLA_MODEM_DCD_LOW		0x01
+#define SDLA_MODEM_CTS_LOW		0x02
+
+/* return codes */
+#define SDLA_RET_OK			0x00
+#define SDLA_RET_COMMUNICATIONS		0x01
+#define SDLA_RET_CHANNEL_INACTIVE	0x02
+#define SDLA_RET_DLCI_INACTIVE		0x03
+#define SDLA_RET_DLCI_CONFIG		0x04
+#define SDLA_RET_BUF_TOO_BIG		0x05
+#define SDLA_RET_NO_DATA		0x05
+#define SDLA_RET_BUF_OVERSIZE		0x06
+#define SDLA_RET_CIR_OVERFLOW		0x07
+#define SDLA_RET_NO_BUFS		0x08
+#define SDLA_RET_TIMEOUT		0x0A
+#define SDLA_RET_MODEM			0x10
+#define SDLA_RET_CHANNEL_OFF		0x11
+#define SDLA_RET_CHANNEL_ON		0x12
+#define SDLA_RET_DLCI_STATUS		0x13
+#define SDLA_RET_DLCI_UNKNOWN       	0x14
+#define SDLA_RET_COMMAND_INVALID    	0x1F
+
+/* Configuration flags */
+#define SDLA_DIRECT_RECV		0x0080
+#define SDLA_TX_NO_EXCEPT		0x0020
+#define SDLA_NO_ICF_MSGS		0x1000
+#define SDLA_TX50_RX50			0x0000
+#define SDLA_TX70_RX30			0x2000
+#define SDLA_TX30_RX70			0x4000
+
+/* IRQ selection flags */
+#define SDLA_IRQ_RECEIVE		0x01
+#define SDLA_IRQ_TRANSMIT		0x02
+#define SDLA_IRQ_MODEM_STAT		0x04
+#define SDLA_IRQ_COMMAND		0x08
+#define SDLA_IRQ_CHANNEL		0x10
+#define SDLA_IRQ_TIMER			0x20
+
+/* definitions for PC memory mapping */
+#define SDLA_8K_WINDOW			0x01
+#define SDLA_S502_SEG_A			0x10
+#define SDLA_S502_SEG_C			0x20
+#define SDLA_S502_SEG_D			0x00
+#define SDLA_S502_SEG_E			0x30
+#define SDLA_S507_SEG_A			0x00
+#define SDLA_S507_SEG_B			0x40
+#define SDLA_S507_SEG_C			0x80
+#define SDLA_S507_SEG_E			0xC0
+#define SDLA_S508_SEG_A			0x00
+#define SDLA_S508_SEG_C			0x10
+#define SDLA_S508_SEG_D			0x08
+#define SDLA_S508_SEG_E			0x18
+
+/* SDLA adapter port constants */
+#define SDLA_IO_EXTENTS			0x04
+	
+#define SDLA_REG_CONTROL		0x00
+#define SDLA_REG_PC_WINDOW		0x01	/* offset for PC window select latch */
+#define SDLA_REG_Z80_WINDOW 		0x02	/* offset for Z80 window select latch */
+#define SDLA_REG_Z80_CONTROL		0x03	/* offset for Z80 control latch */
+	
+#define SDLA_S502_STS			0x00	/* status reg for 502, 502E, 507 */
+#define SDLA_S508_GNRL			0x00	/* general purp. reg for 508 */
+#define SDLA_S508_STS			0x01	/* status reg for 508 */
+#define SDLA_S508_IDR			0x02	/* ID reg for 508 */
+	
+/* control register flags */
+#define SDLA_S502A_START		0x00	/* start the CPU */
+#define SDLA_S502A_INTREQ		0x02
+#define SDLA_S502A_INTEN		0x04
+#define SDLA_S502A_HALT			0x08	/* halt the CPU */	
+#define SDLA_S502A_NMI			0x10	/* issue an NMI to the CPU */
+
+#define SDLA_S502E_CPUEN		0x01
+#define SDLA_S502E_ENABLE		0x02
+#define SDLA_S502E_INTACK		0x04
+	
+#define SDLA_S507_ENABLE		0x01
+#define SDLA_S507_IRQ3			0x00
+#define SDLA_S507_IRQ4			0x20
+#define SDLA_S507_IRQ5			0x40
+#define SDLA_S507_IRQ7			0x60
+#define SDLA_S507_IRQ10			0x80
+#define SDLA_S507_IRQ11			0xA0
+#define SDLA_S507_IRQ12			0xC0
+#define SDLA_S507_IRQ15			0xE0
+	
+#define SDLA_HALT			0x00
+#define SDLA_CPUEN			0x02
+#define SDLA_MEMEN			0x04
+#define SDLA_S507_EPROMWR		0x08
+#define SDLA_S507_EPROMCLK		0x10
+#define SDLA_S508_INTRQ			0x08
+#define SDLA_S508_INTEN			0x10
+
+struct sdla_cmd {
+   char  opp_flag;
+   char  cmd;
+   short length;
+   char  retval;
+   short dlci;
+   char  flags;
+   short rxlost_int;
+   long  rxlost_app;
+   char  reserve[2];
+   char  data[SDLA_MAX_DATA];	/* transfer data buffer */
+} __attribute__((packed));
+
+struct intr_info {
+   char  flags;
+   short txlen;
+   char  irq;
+   char  flags2;
+   short timeout;
+} __attribute__((packed));
+
+/* found in the 508's control window at RXBUF_INFO */
+struct buf_info {
+   unsigned short rse_num;
+   unsigned long  rse_base;
+   unsigned long  rse_next;
+   unsigned long  buf_base;
+   unsigned short reserved;
+   unsigned long  buf_top;
+} __attribute__((packed));
+
+/* structure pointed to by rse_base in RXBUF_INFO struct */
+struct buf_entry {
+   char  opp_flag;
+   short length;
+   short dlci;
+   char  flags;
+   short timestamp;
+   short reserved[2];
+   long  buf_addr;
+} __attribute__((packed));
+
+#endif
+
+#endif
diff --git a/include/linux/seccomp.h b/include/linux/seccomp.h
new file mode 100644
index 00000000..cc7a4e9c
--- /dev/null
+++ b/include/linux/seccomp.h
@@ -0,0 +1,52 @@
+#ifndef _LINUX_SECCOMP_H
+#define _LINUX_SECCOMP_H
+
+
+#ifdef CONFIG_SECCOMP
+
+#include <linux/thread_info.h>
+#include <asm/seccomp.h>
+
+typedef struct { int mode; } seccomp_t;
+
+extern void __secure_computing(int);
+static inline void secure_computing(int this_syscall)
+{
+	if (unlikely(test_thread_flag(TIF_SECCOMP)))
+		__secure_computing(this_syscall);
+}
+
+extern long prctl_get_seccomp(void);
+extern long prctl_set_seccomp(unsigned long);
+
+static inline int seccomp_mode(seccomp_t *s)
+{
+	return s->mode;
+}
+
+#else /* CONFIG_SECCOMP */
+
+#include <linux/errno.h>
+
+typedef struct { } seccomp_t;
+
+#define secure_computing(x) do { } while (0)
+
+static inline long prctl_get_seccomp(void)
+{
+	return -EINVAL;
+}
+
+static inline long prctl_set_seccomp(unsigned long arg2)
+{
+	return -EINVAL;
+}
+
+static inline int seccomp_mode(seccomp_t *s)
+{
+	return 0;
+}
+
+#endif /* CONFIG_SECCOMP */
+
+#endif /* _LINUX_SECCOMP_H */
diff --git a/include/linux/securebits.h b/include/linux/securebits.h
new file mode 100644
index 00000000..33406174
--- /dev/null
+++ b/include/linux/securebits.h
@@ -0,0 +1,54 @@
+#ifndef _LINUX_SECUREBITS_H
+#define _LINUX_SECUREBITS_H 1
+
+/* Each securesetting is implemented using two bits. One bit specifies
+   whether the setting is on or off. The other bit specify whether the
+   setting is locked or not. A setting which is locked cannot be
+   changed from user-level. */
+#define issecure_mask(X)	(1 << (X))
+#ifdef __KERNEL__
+#define issecure(X)		(issecure_mask(X) & current_cred_xxx(securebits))
+#endif
+
+#define SECUREBITS_DEFAULT 0x00000000
+
+/* When set UID 0 has no special privileges. When unset, we support
+   inheritance of root-permissions and suid-root executable under
+   compatibility mode. We raise the effective and inheritable bitmasks
+   *of the executable file* if the effective uid of the new process is
+   0. If the real uid is 0, we raise the effective (legacy) bit of the
+   executable file. */
+#define SECURE_NOROOT			0
+#define SECURE_NOROOT_LOCKED		1  /* make bit-0 immutable */
+
+#define SECBIT_NOROOT		(issecure_mask(SECURE_NOROOT))
+#define SECBIT_NOROOT_LOCKED	(issecure_mask(SECURE_NOROOT_LOCKED))
+
+/* When set, setuid to/from uid 0 does not trigger capability-"fixup".
+   When unset, to provide compatiblility with old programs relying on
+   set*uid to gain/lose privilege, transitions to/from uid 0 cause
+   capabilities to be gained/lost. */
+#define SECURE_NO_SETUID_FIXUP		2
+#define SECURE_NO_SETUID_FIXUP_LOCKED	3  /* make bit-2 immutable */
+
+#define SECBIT_NO_SETUID_FIXUP	(issecure_mask(SECURE_NO_SETUID_FIXUP))
+#define SECBIT_NO_SETUID_FIXUP_LOCKED \
+			(issecure_mask(SECURE_NO_SETUID_FIXUP_LOCKED))
+
+/* When set, a process can retain its capabilities even after
+   transitioning to a non-root user (the set-uid fixup suppressed by
+   bit 2). Bit-4 is cleared when a process calls exec(); setting both
+   bit 4 and 5 will create a barrier through exec that no exec()'d
+   child can use this feature again. */
+#define SECURE_KEEP_CAPS		4
+#define SECURE_KEEP_CAPS_LOCKED		5  /* make bit-4 immutable */
+
+#define SECBIT_KEEP_CAPS	(issecure_mask(SECURE_KEEP_CAPS))
+#define SECBIT_KEEP_CAPS_LOCKED (issecure_mask(SECURE_KEEP_CAPS_LOCKED))
+
+#define SECURE_ALL_BITS		(issecure_mask(SECURE_NOROOT) | \
+				 issecure_mask(SECURE_NO_SETUID_FIXUP) | \
+				 issecure_mask(SECURE_KEEP_CAPS))
+#define SECURE_ALL_LOCKS	(SECURE_ALL_BITS << 1)
+
+#endif /* !_LINUX_SECUREBITS_H */
diff --git a/include/linux/security.h b/include/linux/security.h
new file mode 100644
index 00000000..673afbb8
--- /dev/null
+++ b/include/linux/security.h
@@ -0,0 +1,3025 @@
+/*
+ * Linux Security plug
+ *
+ * Copyright (C) 2001 WireX Communications, Inc <chris@wirex.com>
+ * Copyright (C) 2001 Greg Kroah-Hartman <greg@kroah.com>
+ * Copyright (C) 2001 Networks Associates Technology, Inc <ssmalley@nai.com>
+ * Copyright (C) 2001 James Morris <jmorris@intercode.com.au>
+ * Copyright (C) 2001 Silicon Graphics, Inc. (Trust Technology Group)
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	Due to this file being licensed under the GPL there is controversy over
+ *	whether this permits you to write a module that #includes this file
+ *	without placing your module under the GPL.  Please consult a lawyer for
+ *	advice before doing this.
+ *
+ */
+
+#ifndef __LINUX_SECURITY_H
+#define __LINUX_SECURITY_H
+
+#include <linux/key.h>
+#include <linux/capability.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+struct linux_binprm;
+struct cred;
+struct rlimit;
+struct siginfo;
+struct sem_array;
+struct sembuf;
+struct kern_ipc_perm;
+struct audit_context;
+struct super_block;
+struct inode;
+struct dentry;
+struct file;
+struct vfsmount;
+struct path;
+struct qstr;
+struct nameidata;
+struct iattr;
+struct fown_struct;
+struct file_operations;
+struct shmid_kernel;
+struct msg_msg;
+struct msg_queue;
+struct xattr;
+struct xfrm_sec_ctx;
+struct mm_struct;
+
+/* Maximum number of letters for an LSM name string */
+#define SECURITY_NAME_MAX	10
+
+/* If capable should audit the security request */
+#define SECURITY_CAP_NOAUDIT 0
+#define SECURITY_CAP_AUDIT 1
+
+struct ctl_table;
+struct audit_krule;
+struct user_namespace;
+struct timezone;
+
+/*
+ * These functions are in security/capability.c and are used
+ * as the default capabilities functions
+ */
+extern int cap_capable(const struct cred *cred, struct user_namespace *ns,
+		       int cap, int audit);
+extern int cap_settime(const struct timespec *ts, const struct timezone *tz);
+extern int cap_ptrace_access_check(struct task_struct *child, unsigned int mode);
+extern int cap_ptrace_traceme(struct task_struct *parent);
+extern int cap_capget(struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted);
+extern int cap_capset(struct cred *new, const struct cred *old,
+		      const kernel_cap_t *effective,
+		      const kernel_cap_t *inheritable,
+		      const kernel_cap_t *permitted);
+extern int cap_bprm_set_creds(struct linux_binprm *bprm);
+extern int cap_bprm_secureexec(struct linux_binprm *bprm);
+extern int cap_inode_setxattr(struct dentry *dentry, const char *name,
+			      const void *value, size_t size, int flags);
+extern int cap_inode_removexattr(struct dentry *dentry, const char *name);
+extern int cap_inode_need_killpriv(struct dentry *dentry);
+extern int cap_inode_killpriv(struct dentry *dentry);
+extern int cap_file_mmap(struct file *file, unsigned long reqprot,
+			 unsigned long prot, unsigned long flags,
+			 unsigned long addr, unsigned long addr_only);
+extern int cap_task_fix_setuid(struct cred *new, const struct cred *old, int flags);
+extern int cap_task_prctl(int option, unsigned long arg2, unsigned long arg3,
+			  unsigned long arg4, unsigned long arg5);
+extern int cap_task_setscheduler(struct task_struct *p);
+extern int cap_task_setioprio(struct task_struct *p, int ioprio);
+extern int cap_task_setnice(struct task_struct *p, int nice);
+extern int cap_vm_enough_memory(struct mm_struct *mm, long pages);
+
+struct msghdr;
+struct sk_buff;
+struct sock;
+struct sockaddr;
+struct socket;
+struct flowi;
+struct dst_entry;
+struct xfrm_selector;
+struct xfrm_policy;
+struct xfrm_state;
+struct xfrm_user_sec_ctx;
+struct seq_file;
+
+extern int cap_netlink_send(struct sock *sk, struct sk_buff *skb);
+
+void reset_security_ops(void);
+
+#ifdef CONFIG_MMU
+extern unsigned long mmap_min_addr;
+extern unsigned long dac_mmap_min_addr;
+#else
+#define dac_mmap_min_addr	0UL
+#endif
+
+/*
+ * Values used in the task_security_ops calls
+ */
+/* setuid or setgid, id0 == uid or gid */
+#define LSM_SETID_ID	1
+
+/* setreuid or setregid, id0 == real, id1 == eff */
+#define LSM_SETID_RE	2
+
+/* setresuid or setresgid, id0 == real, id1 == eff, uid2 == saved */
+#define LSM_SETID_RES	4
+
+/* setfsuid or setfsgid, id0 == fsuid or fsgid */
+#define LSM_SETID_FS	8
+
+/* forward declares to avoid warnings */
+struct sched_param;
+struct request_sock;
+
+/* bprm->unsafe reasons */
+#define LSM_UNSAFE_SHARE	1
+#define LSM_UNSAFE_PTRACE	2
+#define LSM_UNSAFE_PTRACE_CAP	4
+
+#ifdef CONFIG_MMU
+extern int mmap_min_addr_handler(struct ctl_table *table, int write,
+				 void __user *buffer, size_t *lenp, loff_t *ppos);
+#endif
+
+/* security_inode_init_security callback function to write xattrs */
+typedef int (*initxattrs) (struct inode *inode,
+			   const struct xattr *xattr_array, void *fs_data);
+
+#ifdef CONFIG_SECURITY
+
+struct security_mnt_opts {
+	char **mnt_opts;
+	int *mnt_opts_flags;
+	int num_mnt_opts;
+};
+
+static inline void security_init_mnt_opts(struct security_mnt_opts *opts)
+{
+	opts->mnt_opts = NULL;
+	opts->mnt_opts_flags = NULL;
+	opts->num_mnt_opts = 0;
+}
+
+static inline void security_free_mnt_opts(struct security_mnt_opts *opts)
+{
+	int i;
+	if (opts->mnt_opts)
+		for (i = 0; i < opts->num_mnt_opts; i++)
+			kfree(opts->mnt_opts[i]);
+	kfree(opts->mnt_opts);
+	opts->mnt_opts = NULL;
+	kfree(opts->mnt_opts_flags);
+	opts->mnt_opts_flags = NULL;
+	opts->num_mnt_opts = 0;
+}
+
+/**
+ * struct security_operations - main security structure
+ *
+ * Security module identifier.
+ *
+ * @name:
+ *	A string that acts as a unique identifier for the LSM with max number
+ *	of characters = SECURITY_NAME_MAX.
+ *
+ * Security hooks for program execution operations.
+ *
+ * @bprm_set_creds:
+ *	Save security information in the bprm->security field, typically based
+ *	on information about the bprm->file, for later use by the apply_creds
+ *	hook.  This hook may also optionally check permissions (e.g. for
+ *	transitions between security domains).
+ *	This hook may be called multiple times during a single execve, e.g. for
+ *	interpreters.  The hook can tell whether it has already been called by
+ *	checking to see if @bprm->security is non-NULL.  If so, then the hook
+ *	may decide either to retain the security information saved earlier or
+ *	to replace it.
+ *	@bprm contains the linux_binprm structure.
+ *	Return 0 if the hook is successful and permission is granted.
+ * @bprm_check_security:
+ *	This hook mediates the point when a search for a binary handler will
+ *	begin.  It allows a check the @bprm->security value which is set in the
+ *	preceding set_creds call.  The primary difference from set_creds is
+ *	that the argv list and envp list are reliably available in @bprm.  This
+ *	hook may be called multiple times during a single execve; and in each
+ *	pass set_creds is called first.
+ *	@bprm contains the linux_binprm structure.
+ *	Return 0 if the hook is successful and permission is granted.
+ * @bprm_committing_creds:
+ *	Prepare to install the new security attributes of a process being
+ *	transformed by an execve operation, based on the old credentials
+ *	pointed to by @current->cred and the information set in @bprm->cred by
+ *	the bprm_set_creds hook.  @bprm points to the linux_binprm structure.
+ *	This hook is a good place to perform state changes on the process such
+ *	as closing open file descriptors to which access will no longer be
+ *	granted when the attributes are changed.  This is called immediately
+ *	before commit_creds().
+ * @bprm_committed_creds:
+ *	Tidy up after the installation of the new security attributes of a
+ *	process being transformed by an execve operation.  The new credentials
+ *	have, by this point, been set to @current->cred.  @bprm points to the
+ *	linux_binprm structure.  This hook is a good place to perform state
+ *	changes on the process such as clearing out non-inheritable signal
+ *	state.  This is called immediately after commit_creds().
+ * @bprm_secureexec:
+ *	Return a boolean value (0 or 1) indicating whether a "secure exec"
+ *	is required.  The flag is passed in the auxiliary table
+ *	on the initial stack to the ELF interpreter to indicate whether libc
+ *	should enable secure mode.
+ *	@bprm contains the linux_binprm structure.
+ *
+ * Security hooks for filesystem operations.
+ *
+ * @sb_alloc_security:
+ *	Allocate and attach a security structure to the sb->s_security field.
+ *	The s_security field is initialized to NULL when the structure is
+ *	allocated.
+ *	@sb contains the super_block structure to be modified.
+ *	Return 0 if operation was successful.
+ * @sb_free_security:
+ *	Deallocate and clear the sb->s_security field.
+ *	@sb contains the super_block structure to be modified.
+ * @sb_statfs:
+ *	Check permission before obtaining filesystem statistics for the @mnt
+ *	mountpoint.
+ *	@dentry is a handle on the superblock for the filesystem.
+ *	Return 0 if permission is granted.
+ * @sb_mount:
+ *	Check permission before an object specified by @dev_name is mounted on
+ *	the mount point named by @nd.  For an ordinary mount, @dev_name
+ *	identifies a device if the file system type requires a device.  For a
+ *	remount (@flags & MS_REMOUNT), @dev_name is irrelevant.  For a
+ *	loopback/bind mount (@flags & MS_BIND), @dev_name identifies the
+ *	pathname of the object being mounted.
+ *	@dev_name contains the name for object being mounted.
+ *	@path contains the path for mount point object.
+ *	@type contains the filesystem type.
+ *	@flags contains the mount flags.
+ *	@data contains the filesystem-specific data.
+ *	Return 0 if permission is granted.
+ * @sb_copy_data:
+ *	Allow mount option data to be copied prior to parsing by the filesystem,
+ *	so that the security module can extract security-specific mount
+ *	options cleanly (a filesystem may modify the data e.g. with strsep()).
+ *	This also allows the original mount data to be stripped of security-
+ *	specific options to avoid having to make filesystems aware of them.
+ *	@type the type of filesystem being mounted.
+ *	@orig the original mount data copied from userspace.
+ *	@copy copied data which will be passed to the security module.
+ *	Returns 0 if the copy was successful.
+ * @sb_remount:
+ *	Extracts security system specific mount options and verifies no changes
+ *	are being made to those options.
+ *	@sb superblock being remounted
+ *	@data contains the filesystem-specific data.
+ *	Return 0 if permission is granted.
+ * @sb_umount:
+ *	Check permission before the @mnt file system is unmounted.
+ *	@mnt contains the mounted file system.
+ *	@flags contains the unmount flags, e.g. MNT_FORCE.
+ *	Return 0 if permission is granted.
+ * @sb_pivotroot:
+ *	Check permission before pivoting the root filesystem.
+ *	@old_path contains the path for the new location of the current root (put_old).
+ *	@new_path contains the path for the new root (new_root).
+ *	Return 0 if permission is granted.
+ * @sb_set_mnt_opts:
+ *	Set the security relevant mount options used for a superblock
+ *	@sb the superblock to set security mount options for
+ *	@opts binary data structure containing all lsm mount data
+ * @sb_clone_mnt_opts:
+ *	Copy all security options from a given superblock to another
+ *	@oldsb old superblock which contain information to clone
+ *	@newsb new superblock which needs filled in
+ * @sb_parse_opts_str:
+ *	Parse a string of security data filling in the opts structure
+ *	@options string containing all mount options known by the LSM
+ *	@opts binary data structure usable by the LSM
+ *
+ * Security hooks for inode operations.
+ *
+ * @inode_alloc_security:
+ *	Allocate and attach a security structure to @inode->i_security.  The
+ *	i_security field is initialized to NULL when the inode structure is
+ *	allocated.
+ *	@inode contains the inode structure.
+ *	Return 0 if operation was successful.
+ * @inode_free_security:
+ *	@inode contains the inode structure.
+ *	Deallocate the inode security structure and set @inode->i_security to
+ *	NULL.
+ * @inode_init_security:
+ *	Obtain the security attribute name suffix and value to set on a newly
+ *	created inode and set up the incore security field for the new inode.
+ *	This hook is called by the fs code as part of the inode creation
+ *	transaction and provides for atomic labeling of the inode, unlike
+ *	the post_create/mkdir/... hooks called by the VFS.  The hook function
+ *	is expected to allocate the name and value via kmalloc, with the caller
+ *	being responsible for calling kfree after using them.
+ *	If the security module does not use security attributes or does
+ *	not wish to put a security attribute on this particular inode,
+ *	then it should return -EOPNOTSUPP to skip this processing.
+ *	@inode contains the inode structure of the newly created inode.
+ *	@dir contains the inode structure of the parent directory.
+ *	@qstr contains the last path component of the new object
+ *	@name will be set to the allocated name suffix (e.g. selinux).
+ *	@value will be set to the allocated attribute value.
+ *	@len will be set to the length of the value.
+ *	Returns 0 if @name and @value have been successfully set,
+ *		-EOPNOTSUPP if no security attribute is needed, or
+ *		-ENOMEM on memory allocation failure.
+ * @inode_create:
+ *	Check permission to create a regular file.
+ *	@dir contains inode structure of the parent of the new file.
+ *	@dentry contains the dentry structure for the file to be created.
+ *	@mode contains the file mode of the file to be created.
+ *	Return 0 if permission is granted.
+ * @inode_link:
+ *	Check permission before creating a new hard link to a file.
+ *	@old_dentry contains the dentry structure for an existing link to the file.
+ *	@dir contains the inode structure of the parent directory of the new link.
+ *	@new_dentry contains the dentry structure for the new link.
+ *	Return 0 if permission is granted.
+ * @path_link:
+ *	Check permission before creating a new hard link to a file.
+ *	@old_dentry contains the dentry structure for an existing link
+ *	to the file.
+ *	@new_dir contains the path structure of the parent directory of
+ *	the new link.
+ *	@new_dentry contains the dentry structure for the new link.
+ *	Return 0 if permission is granted.
+ * @inode_unlink:
+ *	Check the permission to remove a hard link to a file.
+ *	@dir contains the inode structure of parent directory of the file.
+ *	@dentry contains the dentry structure for file to be unlinked.
+ *	Return 0 if permission is granted.
+ * @path_unlink:
+ *	Check the permission to remove a hard link to a file.
+ *	@dir contains the path structure of parent directory of the file.
+ *	@dentry contains the dentry structure for file to be unlinked.
+ *	Return 0 if permission is granted.
+ * @inode_symlink:
+ *	Check the permission to create a symbolic link to a file.
+ *	@dir contains the inode structure of parent directory of the symbolic link.
+ *	@dentry contains the dentry structure of the symbolic link.
+ *	@old_name contains the pathname of file.
+ *	Return 0 if permission is granted.
+ * @path_symlink:
+ *	Check the permission to create a symbolic link to a file.
+ *	@dir contains the path structure of parent directory of
+ *	the symbolic link.
+ *	@dentry contains the dentry structure of the symbolic link.
+ *	@old_name contains the pathname of file.
+ *	Return 0 if permission is granted.
+ * @inode_mkdir:
+ *	Check permissions to create a new directory in the existing directory
+ *	associated with inode structure @dir.
+ *	@dir contains the inode structure of parent of the directory to be created.
+ *	@dentry contains the dentry structure of new directory.
+ *	@mode contains the mode of new directory.
+ *	Return 0 if permission is granted.
+ * @path_mkdir:
+ *	Check permissions to create a new directory in the existing directory
+ *	associated with path structure @path.
+ *	@dir contains the path structure of parent of the directory
+ *	to be created.
+ *	@dentry contains the dentry structure of new directory.
+ *	@mode contains the mode of new directory.
+ *	Return 0 if permission is granted.
+ * @inode_rmdir:
+ *	Check the permission to remove a directory.
+ *	@dir contains the inode structure of parent of the directory to be removed.
+ *	@dentry contains the dentry structure of directory to be removed.
+ *	Return 0 if permission is granted.
+ * @path_rmdir:
+ *	Check the permission to remove a directory.
+ *	@dir contains the path structure of parent of the directory to be
+ *	removed.
+ *	@dentry contains the dentry structure of directory to be removed.
+ *	Return 0 if permission is granted.
+ * @inode_mknod:
+ *	Check permissions when creating a special file (or a socket or a fifo
+ *	file created via the mknod system call).  Note that if mknod operation
+ *	is being done for a regular file, then the create hook will be called
+ *	and not this hook.
+ *	@dir contains the inode structure of parent of the new file.
+ *	@dentry contains the dentry structure of the new file.
+ *	@mode contains the mode of the new file.
+ *	@dev contains the device number.
+ *	Return 0 if permission is granted.
+ * @path_mknod:
+ *	Check permissions when creating a file. Note that this hook is called
+ *	even if mknod operation is being done for a regular file.
+ *	@dir contains the path structure of parent of the new file.
+ *	@dentry contains the dentry structure of the new file.
+ *	@mode contains the mode of the new file.
+ *	@dev contains the undecoded device number. Use new_decode_dev() to get
+ *	the decoded device number.
+ *	Return 0 if permission is granted.
+ * @inode_rename:
+ *	Check for permission to rename a file or directory.
+ *	@old_dir contains the inode structure for parent of the old link.
+ *	@old_dentry contains the dentry structure of the old link.
+ *	@new_dir contains the inode structure for parent of the new link.
+ *	@new_dentry contains the dentry structure of the new link.
+ *	Return 0 if permission is granted.
+ * @path_rename:
+ *	Check for permission to rename a file or directory.
+ *	@old_dir contains the path structure for parent of the old link.
+ *	@old_dentry contains the dentry structure of the old link.
+ *	@new_dir contains the path structure for parent of the new link.
+ *	@new_dentry contains the dentry structure of the new link.
+ *	Return 0 if permission is granted.
+ * @path_chmod:
+ *	Check for permission to change DAC's permission of a file or directory.
+ *	@dentry contains the dentry structure.
+ *	@mnt contains the vfsmnt structure.
+ *	@mode contains DAC's mode.
+ *	Return 0 if permission is granted.
+ * @path_chown:
+ *	Check for permission to change owner/group of a file or directory.
+ *	@path contains the path structure.
+ *	@uid contains new owner's ID.
+ *	@gid contains new group's ID.
+ *	Return 0 if permission is granted.
+ * @path_chroot:
+ *	Check for permission to change root directory.
+ *	@path contains the path structure.
+ *	Return 0 if permission is granted.
+ * @inode_readlink:
+ *	Check the permission to read the symbolic link.
+ *	@dentry contains the dentry structure for the file link.
+ *	Return 0 if permission is granted.
+ * @inode_follow_link:
+ *	Check permission to follow a symbolic link when looking up a pathname.
+ *	@dentry contains the dentry structure for the link.
+ *	@nd contains the nameidata structure for the parent directory.
+ *	Return 0 if permission is granted.
+ * @inode_permission:
+ *	Check permission before accessing an inode.  This hook is called by the
+ *	existing Linux permission function, so a security module can use it to
+ *	provide additional checking for existing Linux permission checks.
+ *	Notice that this hook is called when a file is opened (as well as many
+ *	other operations), whereas the file_security_ops permission hook is
+ *	called when the actual read/write operations are performed.
+ *	@inode contains the inode structure to check.
+ *	@mask contains the permission mask.
+ *	Return 0 if permission is granted.
+ * @inode_setattr:
+ *	Check permission before setting file attributes.  Note that the kernel
+ *	call to notify_change is performed from several locations, whenever
+ *	file attributes change (such as when a file is truncated, chown/chmod
+ *	operations, transferring disk quotas, etc).
+ *	@dentry contains the dentry structure for the file.
+ *	@attr is the iattr structure containing the new file attributes.
+ *	Return 0 if permission is granted.
+ * @path_truncate:
+ *	Check permission before truncating a file.
+ *	@path contains the path structure for the file.
+ *	Return 0 if permission is granted.
+ * @inode_getattr:
+ *	Check permission before obtaining file attributes.
+ *	@mnt is the vfsmount where the dentry was looked up
+ *	@dentry contains the dentry structure for the file.
+ *	Return 0 if permission is granted.
+ * @inode_setxattr:
+ *	Check permission before setting the extended attributes
+ *	@value identified by @name for @dentry.
+ *	Return 0 if permission is granted.
+ * @inode_post_setxattr:
+ *	Update inode security field after successful setxattr operation.
+ *	@value identified by @name for @dentry.
+ * @inode_getxattr:
+ *	Check permission before obtaining the extended attributes
+ *	identified by @name for @dentry.
+ *	Return 0 if permission is granted.
+ * @inode_listxattr:
+ *	Check permission before obtaining the list of extended attribute
+ *	names for @dentry.
+ *	Return 0 if permission is granted.
+ * @inode_removexattr:
+ *	Check permission before removing the extended attribute
+ *	identified by @name for @dentry.
+ *	Return 0 if permission is granted.
+ * @inode_getsecurity:
+ *	Retrieve a copy of the extended attribute representation of the
+ *	security label associated with @name for @inode via @buffer.  Note that
+ *	@name is the remainder of the attribute name after the security prefix
+ *	has been removed. @alloc is used to specify of the call should return a
+ *	value via the buffer or just the value length Return size of buffer on
+ *	success.
+ * @inode_setsecurity:
+ *	Set the security label associated with @name for @inode from the
+ *	extended attribute value @value.  @size indicates the size of the
+ *	@value in bytes.  @flags may be XATTR_CREATE, XATTR_REPLACE, or 0.
+ *	Note that @name is the remainder of the attribute name after the
+ *	security. prefix has been removed.
+ *	Return 0 on success.
+ * @inode_listsecurity:
+ *	Copy the extended attribute names for the security labels
+ *	associated with @inode into @buffer.  The maximum size of @buffer
+ *	is specified by @buffer_size.  @buffer may be NULL to request
+ *	the size of the buffer required.
+ *	Returns number of bytes used/required on success.
+ * @inode_need_killpriv:
+ *	Called when an inode has been changed.
+ *	@dentry is the dentry being changed.
+ *	Return <0 on error to abort the inode change operation.
+ *	Return 0 if inode_killpriv does not need to be called.
+ *	Return >0 if inode_killpriv does need to be called.
+ * @inode_killpriv:
+ *	The setuid bit is being removed.  Remove similar security labels.
+ *	Called with the dentry->d_inode->i_mutex held.
+ *	@dentry is the dentry being changed.
+ *	Return 0 on success.  If error is returned, then the operation
+ *	causing setuid bit removal is failed.
+ * @inode_getsecid:
+ *	Get the secid associated with the node.
+ *	@inode contains a pointer to the inode.
+ *	@secid contains a pointer to the location where result will be saved.
+ *	In case of failure, @secid will be set to zero.
+ *
+ * Security hooks for file operations
+ *
+ * @file_permission:
+ *	Check file permissions before accessing an open file.  This hook is
+ *	called by various operations that read or write files.  A security
+ *	module can use this hook to perform additional checking on these
+ *	operations, e.g.  to revalidate permissions on use to support privilege
+ *	bracketing or policy changes.  Notice that this hook is used when the
+ *	actual read/write operations are performed, whereas the
+ *	inode_security_ops hook is called when a file is opened (as well as
+ *	many other operations).
+ *	Caveat:  Although this hook can be used to revalidate permissions for
+ *	various system call operations that read or write files, it does not
+ *	address the revalidation of permissions for memory-mapped files.
+ *	Security modules must handle this separately if they need such
+ *	revalidation.
+ *	@file contains the file structure being accessed.
+ *	@mask contains the requested permissions.
+ *	Return 0 if permission is granted.
+ * @file_alloc_security:
+ *	Allocate and attach a security structure to the file->f_security field.
+ *	The security field is initialized to NULL when the structure is first
+ *	created.
+ *	@file contains the file structure to secure.
+ *	Return 0 if the hook is successful and permission is granted.
+ * @file_free_security:
+ *	Deallocate and free any security structures stored in file->f_security.
+ *	@file contains the file structure being modified.
+ * @file_ioctl:
+ *	@file contains the file structure.
+ *	@cmd contains the operation to perform.
+ *	@arg contains the operational arguments.
+ *	Check permission for an ioctl operation on @file.  Note that @arg
+ *	sometimes represents a user space pointer; in other cases, it may be a
+ *	simple integer value.  When @arg represents a user space pointer, it
+ *	should never be used by the security module.
+ *	Return 0 if permission is granted.
+ * @file_mmap :
+ *	Check permissions for a mmap operation.  The @file may be NULL, e.g.
+ *	if mapping anonymous memory.
+ *	@file contains the file structure for file to map (may be NULL).
+ *	@reqprot contains the protection requested by the application.
+ *	@prot contains the protection that will be applied by the kernel.
+ *	@flags contains the operational flags.
+ *	@addr contains virtual address that will be used for the operation.
+ *	@addr_only contains a boolean: 0 if file-backed VMA, otherwise 1.
+ *	Return 0 if permission is granted.
+ * @file_mprotect:
+ *	Check permissions before changing memory access permissions.
+ *	@vma contains the memory region to modify.
+ *	@reqprot contains the protection requested by the application.
+ *	@prot contains the protection that will be applied by the kernel.
+ *	Return 0 if permission is granted.
+ * @file_lock:
+ *	Check permission before performing file locking operations.
+ *	Note: this hook mediates both flock and fcntl style locks.
+ *	@file contains the file structure.
+ *	@cmd contains the posix-translated lock operation to perform
+ *	(e.g. F_RDLCK, F_WRLCK).
+ *	Return 0 if permission is granted.
+ * @file_fcntl:
+ *	Check permission before allowing the file operation specified by @cmd
+ *	from being performed on the file @file.  Note that @arg sometimes
+ *	represents a user space pointer; in other cases, it may be a simple
+ *	integer value.  When @arg represents a user space pointer, it should
+ *	never be used by the security module.
+ *	@file contains the file structure.
+ *	@cmd contains the operation to be performed.
+ *	@arg contains the operational arguments.
+ *	Return 0 if permission is granted.
+ * @file_set_fowner:
+ *	Save owner security information (typically from current->security) in
+ *	file->f_security for later use by the send_sigiotask hook.
+ *	@file contains the file structure to update.
+ *	Return 0 on success.
+ * @file_send_sigiotask:
+ *	Check permission for the file owner @fown to send SIGIO or SIGURG to the
+ *	process @tsk.  Note that this hook is sometimes called from interrupt.
+ *	Note that the fown_struct, @fown, is never outside the context of a
+ *	struct file, so the file structure (and associated security information)
+ *	can always be obtained:
+ *		container_of(fown, struct file, f_owner)
+ *	@tsk contains the structure of task receiving signal.
+ *	@fown contains the file owner information.
+ *	@sig is the signal that will be sent.  When 0, kernel sends SIGIO.
+ *	Return 0 if permission is granted.
+ * @file_receive:
+ *	This hook allows security modules to control the ability of a process
+ *	to receive an open file descriptor via socket IPC.
+ *	@file contains the file structure being received.
+ *	Return 0 if permission is granted.
+ *
+ * Security hook for dentry
+ *
+ * @dentry_open
+ *	Save open-time permission checking state for later use upon
+ *	file_permission, and recheck access if anything has changed
+ *	since inode_permission.
+ *
+ * Security hooks for task operations.
+ *
+ * @task_create:
+ *	Check permission before creating a child process.  See the clone(2)
+ *	manual page for definitions of the @clone_flags.
+ *	@clone_flags contains the flags indicating what should be shared.
+ *	Return 0 if permission is granted.
+ * @task_free:
+ *	@task task being freed
+ *	Handle release of task-related resources. (Note that this can be called
+ *	from interrupt context.)
+ * @cred_alloc_blank:
+ *	@cred points to the credentials.
+ *	@gfp indicates the atomicity of any memory allocations.
+ *	Only allocate sufficient memory and attach to @cred such that
+ *	cred_transfer() will not get ENOMEM.
+ * @cred_free:
+ *	@cred points to the credentials.
+ *	Deallocate and clear the cred->security field in a set of credentials.
+ * @cred_prepare:
+ *	@new points to the new credentials.
+ *	@old points to the original credentials.
+ *	@gfp indicates the atomicity of any memory allocations.
+ *	Prepare a new set of credentials by copying the data from the old set.
+ * @cred_transfer:
+ *	@new points to the new credentials.
+ *	@old points to the original credentials.
+ *	Transfer data from original creds to new creds
+ * @kernel_act_as:
+ *	Set the credentials for a kernel service to act as (subjective context).
+ *	@new points to the credentials to be modified.
+ *	@secid specifies the security ID to be set
+ *	The current task must be the one that nominated @secid.
+ *	Return 0 if successful.
+ * @kernel_create_files_as:
+ *	Set the file creation context in a set of credentials to be the same as
+ *	the objective context of the specified inode.
+ *	@new points to the credentials to be modified.
+ *	@inode points to the inode to use as a reference.
+ *	The current task must be the one that nominated @inode.
+ *	Return 0 if successful.
+ * @kernel_module_request:
+ *	Ability to trigger the kernel to automatically upcall to userspace for
+ *	userspace to load a kernel module with the given name.
+ *	@kmod_name name of the module requested by the kernel
+ *	Return 0 if successful.
+ * @task_fix_setuid:
+ *	Update the module's state after setting one or more of the user
+ *	identity attributes of the current process.  The @flags parameter
+ *	indicates which of the set*uid system calls invoked this hook.  If
+ *	@new is the set of credentials that will be installed.  Modifications
+ *	should be made to this rather than to @current->cred.
+ *	@old is the set of credentials that are being replaces
+ *	@flags contains one of the LSM_SETID_* values.
+ *	Return 0 on success.
+ * @task_setpgid:
+ *	Check permission before setting the process group identifier of the
+ *	process @p to @pgid.
+ *	@p contains the task_struct for process being modified.
+ *	@pgid contains the new pgid.
+ *	Return 0 if permission is granted.
+ * @task_getpgid:
+ *	Check permission before getting the process group identifier of the
+ *	process @p.
+ *	@p contains the task_struct for the process.
+ *	Return 0 if permission is granted.
+ * @task_getsid:
+ *	Check permission before getting the session identifier of the process
+ *	@p.
+ *	@p contains the task_struct for the process.
+ *	Return 0 if permission is granted.
+ * @task_getsecid:
+ *	Retrieve the security identifier of the process @p.
+ *	@p contains the task_struct for the process and place is into @secid.
+ *	In case of failure, @secid will be set to zero.
+ *
+ * @task_setnice:
+ *	Check permission before setting the nice value of @p to @nice.
+ *	@p contains the task_struct of process.
+ *	@nice contains the new nice value.
+ *	Return 0 if permission is granted.
+ * @task_setioprio
+ *	Check permission before setting the ioprio value of @p to @ioprio.
+ *	@p contains the task_struct of process.
+ *	@ioprio contains the new ioprio value
+ *	Return 0 if permission is granted.
+ * @task_getioprio
+ *	Check permission before getting the ioprio value of @p.
+ *	@p contains the task_struct of process.
+ *	Return 0 if permission is granted.
+ * @task_setrlimit:
+ *	Check permission before setting the resource limits of the current
+ *	process for @resource to @new_rlim.  The old resource limit values can
+ *	be examined by dereferencing (current->signal->rlim + resource).
+ *	@resource contains the resource whose limit is being set.
+ *	@new_rlim contains the new limits for @resource.
+ *	Return 0 if permission is granted.
+ * @task_setscheduler:
+ *	Check permission before setting scheduling policy and/or parameters of
+ *	process @p based on @policy and @lp.
+ *	@p contains the task_struct for process.
+ *	@policy contains the scheduling policy.
+ *	@lp contains the scheduling parameters.
+ *	Return 0 if permission is granted.
+ * @task_getscheduler:
+ *	Check permission before obtaining scheduling information for process
+ *	@p.
+ *	@p contains the task_struct for process.
+ *	Return 0 if permission is granted.
+ * @task_movememory
+ *	Check permission before moving memory owned by process @p.
+ *	@p contains the task_struct for process.
+ *	Return 0 if permission is granted.
+ * @task_kill:
+ *	Check permission before sending signal @sig to @p.  @info can be NULL,
+ *	the constant 1, or a pointer to a siginfo structure.  If @info is 1 or
+ *	SI_FROMKERNEL(info) is true, then the signal should be viewed as coming
+ *	from the kernel and should typically be permitted.
+ *	SIGIO signals are handled separately by the send_sigiotask hook in
+ *	file_security_ops.
+ *	@p contains the task_struct for process.
+ *	@info contains the signal information.
+ *	@sig contains the signal value.
+ *	@secid contains the sid of the process where the signal originated
+ *	Return 0 if permission is granted.
+ * @task_wait:
+ *	Check permission before allowing a process to reap a child process @p
+ *	and collect its status information.
+ *	@p contains the task_struct for process.
+ *	Return 0 if permission is granted.
+ * @task_prctl:
+ *	Check permission before performing a process control operation on the
+ *	current process.
+ *	@option contains the operation.
+ *	@arg2 contains a argument.
+ *	@arg3 contains a argument.
+ *	@arg4 contains a argument.
+ *	@arg5 contains a argument.
+ *	Return -ENOSYS if no-one wanted to handle this op, any other value to
+ *	cause prctl() to return immediately with that value.
+ * @task_to_inode:
+ *	Set the security attributes for an inode based on an associated task's
+ *	security attributes, e.g. for /proc/pid inodes.
+ *	@p contains the task_struct for the task.
+ *	@inode contains the inode structure for the inode.
+ *
+ * Security hooks for Netlink messaging.
+ *
+ * @netlink_send:
+ *	Save security information for a netlink message so that permission
+ *	checking can be performed when the message is processed.  The security
+ *	information can be saved using the eff_cap field of the
+ *	netlink_skb_parms structure.  Also may be used to provide fine
+ *	grained control over message transmission.
+ *	@sk associated sock of task sending the message.
+ *	@skb contains the sk_buff structure for the netlink message.
+ *	Return 0 if the information was successfully saved and message
+ *	is allowed to be transmitted.
+ *
+ * Security hooks for Unix domain networking.
+ *
+ * @unix_stream_connect:
+ *	Check permissions before establishing a Unix domain stream connection
+ *	between @sock and @other.
+ *	@sock contains the sock structure.
+ *	@other contains the peer sock structure.
+ *	@newsk contains the new sock structure.
+ *	Return 0 if permission is granted.
+ * @unix_may_send:
+ *	Check permissions before connecting or sending datagrams from @sock to
+ *	@other.
+ *	@sock contains the socket structure.
+ *	@other contains the peer socket structure.
+ *	Return 0 if permission is granted.
+ *
+ * The @unix_stream_connect and @unix_may_send hooks were necessary because
+ * Linux provides an alternative to the conventional file name space for Unix
+ * domain sockets.  Whereas binding and connecting to sockets in the file name
+ * space is mediated by the typical file permissions (and caught by the mknod
+ * and permission hooks in inode_security_ops), binding and connecting to
+ * sockets in the abstract name space is completely unmediated.  Sufficient
+ * control of Unix domain sockets in the abstract name space isn't possible
+ * using only the socket layer hooks, since we need to know the actual target
+ * socket, which is not looked up until we are inside the af_unix code.
+ *
+ * Security hooks for socket operations.
+ *
+ * @socket_create:
+ *	Check permissions prior to creating a new socket.
+ *	@family contains the requested protocol family.
+ *	@type contains the requested communications type.
+ *	@protocol contains the requested protocol.
+ *	@kern set to 1 if a kernel socket.
+ *	Return 0 if permission is granted.
+ * @socket_post_create:
+ *	This hook allows a module to update or allocate a per-socket security
+ *	structure. Note that the security field was not added directly to the
+ *	socket structure, but rather, the socket security information is stored
+ *	in the associated inode.  Typically, the inode alloc_security hook will
+ *	allocate and and attach security information to
+ *	sock->inode->i_security.  This hook may be used to update the
+ *	sock->inode->i_security field with additional information that wasn't
+ *	available when the inode was allocated.
+ *	@sock contains the newly created socket structure.
+ *	@family contains the requested protocol family.
+ *	@type contains the requested communications type.
+ *	@protocol contains the requested protocol.
+ *	@kern set to 1 if a kernel socket.
+ * @socket_bind:
+ *	Check permission before socket protocol layer bind operation is
+ *	performed and the socket @sock is bound to the address specified in the
+ *	@address parameter.
+ *	@sock contains the socket structure.
+ *	@address contains the address to bind to.
+ *	@addrlen contains the length of address.
+ *	Return 0 if permission is granted.
+ * @socket_connect:
+ *	Check permission before socket protocol layer connect operation
+ *	attempts to connect socket @sock to a remote address, @address.
+ *	@sock contains the socket structure.
+ *	@address contains the address of remote endpoint.
+ *	@addrlen contains the length of address.
+ *	Return 0 if permission is granted.
+ * @socket_listen:
+ *	Check permission before socket protocol layer listen operation.
+ *	@sock contains the socket structure.
+ *	@backlog contains the maximum length for the pending connection queue.
+ *	Return 0 if permission is granted.
+ * @socket_accept:
+ *	Check permission before accepting a new connection.  Note that the new
+ *	socket, @newsock, has been created and some information copied to it,
+ *	but the accept operation has not actually been performed.
+ *	@sock contains the listening socket structure.
+ *	@newsock contains the newly created server socket for connection.
+ *	Return 0 if permission is granted.
+ * @socket_sendmsg:
+ *	Check permission before transmitting a message to another socket.
+ *	@sock contains the socket structure.
+ *	@msg contains the message to be transmitted.
+ *	@size contains the size of message.
+ *	Return 0 if permission is granted.
+ * @socket_recvmsg:
+ *	Check permission before receiving a message from a socket.
+ *	@sock contains the socket structure.
+ *	@msg contains the message structure.
+ *	@size contains the size of message structure.
+ *	@flags contains the operational flags.
+ *	Return 0 if permission is granted.
+ * @socket_getsockname:
+ *	Check permission before the local address (name) of the socket object
+ *	@sock is retrieved.
+ *	@sock contains the socket structure.
+ *	Return 0 if permission is granted.
+ * @socket_getpeername:
+ *	Check permission before the remote address (name) of a socket object
+ *	@sock is retrieved.
+ *	@sock contains the socket structure.
+ *	Return 0 if permission is granted.
+ * @socket_getsockopt:
+ *	Check permissions before retrieving the options associated with socket
+ *	@sock.
+ *	@sock contains the socket structure.
+ *	@level contains the protocol level to retrieve option from.
+ *	@optname contains the name of option to retrieve.
+ *	Return 0 if permission is granted.
+ * @socket_setsockopt:
+ *	Check permissions before setting the options associated with socket
+ *	@sock.
+ *	@sock contains the socket structure.
+ *	@level contains the protocol level to set options for.
+ *	@optname contains the name of the option to set.
+ *	Return 0 if permission is granted.
+ * @socket_shutdown:
+ *	Checks permission before all or part of a connection on the socket
+ *	@sock is shut down.
+ *	@sock contains the socket structure.
+ *	@how contains the flag indicating how future sends and receives are handled.
+ *	Return 0 if permission is granted.
+ * @socket_sock_rcv_skb:
+ *	Check permissions on incoming network packets.  This hook is distinct
+ *	from Netfilter's IP input hooks since it is the first time that the
+ *	incoming sk_buff @skb has been associated with a particular socket, @sk.
+ *	Must not sleep inside this hook because some callers hold spinlocks.
+ *	@sk contains the sock (not socket) associated with the incoming sk_buff.
+ *	@skb contains the incoming network data.
+ * @socket_getpeersec_stream:
+ *	This hook allows the security module to provide peer socket security
+ *	state for unix or connected tcp sockets to userspace via getsockopt
+ *	SO_GETPEERSEC.  For tcp sockets this can be meaningful if the
+ *	socket is associated with an ipsec SA.
+ *	@sock is the local socket.
+ *	@optval userspace memory where the security state is to be copied.
+ *	@optlen userspace int where the module should copy the actual length
+ *	of the security state.
+ *	@len as input is the maximum length to copy to userspace provided
+ *	by the caller.
+ *	Return 0 if all is well, otherwise, typical getsockopt return
+ *	values.
+ * @socket_getpeersec_dgram:
+ *	This hook allows the security module to provide peer socket security
+ *	state for udp sockets on a per-packet basis to userspace via
+ *	getsockopt SO_GETPEERSEC.  The application must first have indicated
+ *	the IP_PASSSEC option via getsockopt.  It can then retrieve the
+ *	security state returned by this hook for a packet via the SCM_SECURITY
+ *	ancillary message type.
+ *	@skb is the skbuff for the packet being queried
+ *	@secdata is a pointer to a buffer in which to copy the security data
+ *	@seclen is the maximum length for @secdata
+ *	Return 0 on success, error on failure.
+ * @sk_alloc_security:
+ *	Allocate and attach a security structure to the sk->sk_security field,
+ *	which is used to copy security attributes between local stream sockets.
+ * @sk_free_security:
+ *	Deallocate security structure.
+ * @sk_clone_security:
+ *	Clone/copy security structure.
+ * @sk_getsecid:
+ *	Retrieve the LSM-specific secid for the sock to enable caching of network
+ *	authorizations.
+ * @sock_graft:
+ *	Sets the socket's isec sid to the sock's sid.
+ * @inet_conn_request:
+ *	Sets the openreq's sid to socket's sid with MLS portion taken from peer sid.
+ * @inet_csk_clone:
+ *	Sets the new child socket's sid to the openreq sid.
+ * @inet_conn_established:
+ *	Sets the connection's peersid to the secmark on skb.
+ * @secmark_relabel_packet:
+ *	check if the process should be allowed to relabel packets to the given secid
+ * @security_secmark_refcount_inc
+ *	tells the LSM to increment the number of secmark labeling rules loaded
+ * @security_secmark_refcount_dec
+ *	tells the LSM to decrement the number of secmark labeling rules loaded
+ * @req_classify_flow:
+ *	Sets the flow's sid to the openreq sid.
+ * @tun_dev_create:
+ *	Check permissions prior to creating a new TUN device.
+ * @tun_dev_post_create:
+ *	This hook allows a module to update or allocate a per-socket security
+ *	structure.
+ *	@sk contains the newly created sock structure.
+ * @tun_dev_attach:
+ *	Check permissions prior to attaching to a persistent TUN device.  This
+ *	hook can also be used by the module to update any security state
+ *	associated with the TUN device's sock structure.
+ *	@sk contains the existing sock structure.
+ *
+ * Security hooks for XFRM operations.
+ *
+ * @xfrm_policy_alloc_security:
+ *	@ctxp is a pointer to the xfrm_sec_ctx being added to Security Policy
+ *	Database used by the XFRM system.
+ *	@sec_ctx contains the security context information being provided by
+ *	the user-level policy update program (e.g., setkey).
+ *	Allocate a security structure to the xp->security field; the security
+ *	field is initialized to NULL when the xfrm_policy is allocated.
+ *	Return 0 if operation was successful (memory to allocate, legal context)
+ * @xfrm_policy_clone_security:
+ *	@old_ctx contains an existing xfrm_sec_ctx.
+ *	@new_ctxp contains a new xfrm_sec_ctx being cloned from old.
+ *	Allocate a security structure in new_ctxp that contains the
+ *	information from the old_ctx structure.
+ *	Return 0 if operation was successful (memory to allocate).
+ * @xfrm_policy_free_security:
+ *	@ctx contains the xfrm_sec_ctx
+ *	Deallocate xp->security.
+ * @xfrm_policy_delete_security:
+ *	@ctx contains the xfrm_sec_ctx.
+ *	Authorize deletion of xp->security.
+ * @xfrm_state_alloc_security:
+ *	@x contains the xfrm_state being added to the Security Association
+ *	Database by the XFRM system.
+ *	@sec_ctx contains the security context information being provided by
+ *	the user-level SA generation program (e.g., setkey or racoon).
+ *	@secid contains the secid from which to take the mls portion of the context.
+ *	Allocate a security structure to the x->security field; the security
+ *	field is initialized to NULL when the xfrm_state is allocated. Set the
+ *	context to correspond to either sec_ctx or polsec, with the mls portion
+ *	taken from secid in the latter case.
+ *	Return 0 if operation was successful (memory to allocate, legal context).
+ * @xfrm_state_free_security:
+ *	@x contains the xfrm_state.
+ *	Deallocate x->security.
+ * @xfrm_state_delete_security:
+ *	@x contains the xfrm_state.
+ *	Authorize deletion of x->security.
+ * @xfrm_policy_lookup:
+ *	@ctx contains the xfrm_sec_ctx for which the access control is being
+ *	checked.
+ *	@fl_secid contains the flow security label that is used to authorize
+ *	access to the policy xp.
+ *	@dir contains the direction of the flow (input or output).
+ *	Check permission when a flow selects a xfrm_policy for processing
+ *	XFRMs on a packet.  The hook is called when selecting either a
+ *	per-socket policy or a generic xfrm policy.
+ *	Return 0 if permission is granted, -ESRCH otherwise, or -errno
+ *	on other errors.
+ * @xfrm_state_pol_flow_match:
+ *	@x contains the state to match.
+ *	@xp contains the policy to check for a match.
+ *	@fl contains the flow to check for a match.
+ *	Return 1 if there is a match.
+ * @xfrm_decode_session:
+ *	@skb points to skb to decode.
+ *	@secid points to the flow key secid to set.
+ *	@ckall says if all xfrms used should be checked for same secid.
+ *	Return 0 if ckall is zero or all xfrms used have the same secid.
+ *
+ * Security hooks affecting all Key Management operations
+ *
+ * @key_alloc:
+ *	Permit allocation of a key and assign security data. Note that key does
+ *	not have a serial number assigned at this point.
+ *	@key points to the key.
+ *	@flags is the allocation flags
+ *	Return 0 if permission is granted, -ve error otherwise.
+ * @key_free:
+ *	Notification of destruction; free security data.
+ *	@key points to the key.
+ *	No return value.
+ * @key_permission:
+ *	See whether a specific operational right is granted to a process on a
+ *	key.
+ *	@key_ref refers to the key (key pointer + possession attribute bit).
+ *	@cred points to the credentials to provide the context against which to
+ *	evaluate the security data on the key.
+ *	@perm describes the combination of permissions required of this key.
+ *	Return 0 if permission is granted, -ve error otherwise.
+ * @key_getsecurity:
+ *	Get a textual representation of the security context attached to a key
+ *	for the purposes of honouring KEYCTL_GETSECURITY.  This function
+ *	allocates the storage for the NUL-terminated string and the caller
+ *	should free it.
+ *	@key points to the key to be queried.
+ *	@_buffer points to a pointer that should be set to point to the
+ *	resulting string (if no label or an error occurs).
+ *	Return the length of the string (including terminating NUL) or -ve if
+ *	an error.
+ *	May also return 0 (and a NULL buffer pointer) if there is no label.
+ *
+ * Security hooks affecting all System V IPC operations.
+ *
+ * @ipc_permission:
+ *	Check permissions for access to IPC
+ *	@ipcp contains the kernel IPC permission structure
+ *	@flag contains the desired (requested) permission set
+ *	Return 0 if permission is granted.
+ * @ipc_getsecid:
+ *	Get the secid associated with the ipc object.
+ *	@ipcp contains the kernel IPC permission structure.
+ *	@secid contains a pointer to the location where result will be saved.
+ *	In case of failure, @secid will be set to zero.
+ *
+ * Security hooks for individual messages held in System V IPC message queues
+ * @msg_msg_alloc_security:
+ *	Allocate and attach a security structure to the msg->security field.
+ *	The security field is initialized to NULL when the structure is first
+ *	created.
+ *	@msg contains the message structure to be modified.
+ *	Return 0 if operation was successful and permission is granted.
+ * @msg_msg_free_security:
+ *	Deallocate the security structure for this message.
+ *	@msg contains the message structure to be modified.
+ *
+ * Security hooks for System V IPC Message Queues
+ *
+ * @msg_queue_alloc_security:
+ *	Allocate and attach a security structure to the
+ *	msq->q_perm.security field. The security field is initialized to
+ *	NULL when the structure is first created.
+ *	@msq contains the message queue structure to be modified.
+ *	Return 0 if operation was successful and permission is granted.
+ * @msg_queue_free_security:
+ *	Deallocate security structure for this message queue.
+ *	@msq contains the message queue structure to be modified.
+ * @msg_queue_associate:
+ *	Check permission when a message queue is requested through the
+ *	msgget system call.  This hook is only called when returning the
+ *	message queue identifier for an existing message queue, not when a
+ *	new message queue is created.
+ *	@msq contains the message queue to act upon.
+ *	@msqflg contains the operation control flags.
+ *	Return 0 if permission is granted.
+ * @msg_queue_msgctl:
+ *	Check permission when a message control operation specified by @cmd
+ *	is to be performed on the message queue @msq.
+ *	The @msq may be NULL, e.g. for IPC_INFO or MSG_INFO.
+ *	@msq contains the message queue to act upon.  May be NULL.
+ *	@cmd contains the operation to be performed.
+ *	Return 0 if permission is granted.
+ * @msg_queue_msgsnd:
+ *	Check permission before a message, @msg, is enqueued on the message
+ *	queue, @msq.
+ *	@msq contains the message queue to send message to.
+ *	@msg contains the message to be enqueued.
+ *	@msqflg contains operational flags.
+ *	Return 0 if permission is granted.
+ * @msg_queue_msgrcv:
+ *	Check permission before a message, @msg, is removed from the message
+ *	queue, @msq.  The @target task structure contains a pointer to the
+ *	process that will be receiving the message (not equal to the current
+ *	process when inline receives are being performed).
+ *	@msq contains the message queue to retrieve message from.
+ *	@msg contains the message destination.
+ *	@target contains the task structure for recipient process.
+ *	@type contains the type of message requested.
+ *	@mode contains the operational flags.
+ *	Return 0 if permission is granted.
+ *
+ * Security hooks for System V Shared Memory Segments
+ *
+ * @shm_alloc_security:
+ *	Allocate and attach a security structure to the shp->shm_perm.security
+ *	field.  The security field is initialized to NULL when the structure is
+ *	first created.
+ *	@shp contains the shared memory structure to be modified.
+ *	Return 0 if operation was successful and permission is granted.
+ * @shm_free_security:
+ *	Deallocate the security struct for this memory segment.
+ *	@shp contains the shared memory structure to be modified.
+ * @shm_associate:
+ *	Check permission when a shared memory region is requested through the
+ *	shmget system call.  This hook is only called when returning the shared
+ *	memory region identifier for an existing region, not when a new shared
+ *	memory region is created.
+ *	@shp contains the shared memory structure to be modified.
+ *	@shmflg contains the operation control flags.
+ *	Return 0 if permission is granted.
+ * @shm_shmctl:
+ *	Check permission when a shared memory control operation specified by
+ *	@cmd is to be performed on the shared memory region @shp.
+ *	The @shp may be NULL, e.g. for IPC_INFO or SHM_INFO.
+ *	@shp contains shared memory structure to be modified.
+ *	@cmd contains the operation to be performed.
+ *	Return 0 if permission is granted.
+ * @shm_shmat:
+ *	Check permissions prior to allowing the shmat system call to attach the
+ *	shared memory segment @shp to the data segment of the calling process.
+ *	The attaching address is specified by @shmaddr.
+ *	@shp contains the shared memory structure to be modified.
+ *	@shmaddr contains the address to attach memory region to.
+ *	@shmflg contains the operational flags.
+ *	Return 0 if permission is granted.
+ *
+ * Security hooks for System V Semaphores
+ *
+ * @sem_alloc_security:
+ *	Allocate and attach a security structure to the sma->sem_perm.security
+ *	field.  The security field is initialized to NULL when the structure is
+ *	first created.
+ *	@sma contains the semaphore structure
+ *	Return 0 if operation was successful and permission is granted.
+ * @sem_free_security:
+ *	deallocate security struct for this semaphore
+ *	@sma contains the semaphore structure.
+ * @sem_associate:
+ *	Check permission when a semaphore is requested through the semget
+ *	system call.  This hook is only called when returning the semaphore
+ *	identifier for an existing semaphore, not when a new one must be
+ *	created.
+ *	@sma contains the semaphore structure.
+ *	@semflg contains the operation control flags.
+ *	Return 0 if permission is granted.
+ * @sem_semctl:
+ *	Check permission when a semaphore operation specified by @cmd is to be
+ *	performed on the semaphore @sma.  The @sma may be NULL, e.g. for
+ *	IPC_INFO or SEM_INFO.
+ *	@sma contains the semaphore structure.  May be NULL.
+ *	@cmd contains the operation to be performed.
+ *	Return 0 if permission is granted.
+ * @sem_semop
+ *	Check permissions before performing operations on members of the
+ *	semaphore set @sma.  If the @alter flag is nonzero, the semaphore set
+ *	may be modified.
+ *	@sma contains the semaphore structure.
+ *	@sops contains the operations to perform.
+ *	@nsops contains the number of operations to perform.
+ *	@alter contains the flag indicating whether changes are to be made.
+ *	Return 0 if permission is granted.
+ *
+ * @ptrace_access_check:
+ *	Check permission before allowing the current process to trace the
+ *	@child process.
+ *	Security modules may also want to perform a process tracing check
+ *	during an execve in the set_security or apply_creds hooks of
+ *	tracing check during an execve in the bprm_set_creds hook of
+ *	binprm_security_ops if the process is being traced and its security
+ *	attributes would be changed by the execve.
+ *	@child contains the task_struct structure for the target process.
+ *	@mode contains the PTRACE_MODE flags indicating the form of access.
+ *	Return 0 if permission is granted.
+ * @ptrace_traceme:
+ *	Check that the @parent process has sufficient permission to trace the
+ *	current process before allowing the current process to present itself
+ *	to the @parent process for tracing.
+ *	The parent process will still have to undergo the ptrace_access_check
+ *	checks before it is allowed to trace this one.
+ *	@parent contains the task_struct structure for debugger process.
+ *	Return 0 if permission is granted.
+ * @capget:
+ *	Get the @effective, @inheritable, and @permitted capability sets for
+ *	the @target process.  The hook may also perform permission checking to
+ *	determine if the current process is allowed to see the capability sets
+ *	of the @target process.
+ *	@target contains the task_struct structure for target process.
+ *	@effective contains the effective capability set.
+ *	@inheritable contains the inheritable capability set.
+ *	@permitted contains the permitted capability set.
+ *	Return 0 if the capability sets were successfully obtained.
+ * @capset:
+ *	Set the @effective, @inheritable, and @permitted capability sets for
+ *	the current process.
+ *	@new contains the new credentials structure for target process.
+ *	@old contains the current credentials structure for target process.
+ *	@effective contains the effective capability set.
+ *	@inheritable contains the inheritable capability set.
+ *	@permitted contains the permitted capability set.
+ *	Return 0 and update @new if permission is granted.
+ * @capable:
+ *	Check whether the @tsk process has the @cap capability in the indicated
+ *	credentials.
+ *	@cred contains the credentials to use.
+ *	@ns contains the user namespace we want the capability in
+ *	@cap contains the capability <include/linux/capability.h>.
+ *	@audit: Whether to write an audit message or not
+ *	Return 0 if the capability is granted for @tsk.
+ * @syslog:
+ *	Check permission before accessing the kernel message ring or changing
+ *	logging to the console.
+ *	See the syslog(2) manual page for an explanation of the @type values.
+ *	@type contains the type of action.
+ *	@from_file indicates the context of action (if it came from /proc).
+ *	Return 0 if permission is granted.
+ * @settime:
+ *	Check permission to change the system time.
+ *	struct timespec and timezone are defined in include/linux/time.h
+ *	@ts contains new time
+ *	@tz contains new timezone
+ *	Return 0 if permission is granted.
+ * @vm_enough_memory:
+ *	Check permissions for allocating a new virtual mapping.
+ *	@mm contains the mm struct it is being added to.
+ *	@pages contains the number of pages.
+ *	Return 0 if permission is granted.
+ *
+ * @secid_to_secctx:
+ *	Convert secid to security context.  If secdata is NULL the length of
+ *	the result will be returned in seclen, but no secdata will be returned.
+ *	This does mean that the length could change between calls to check the
+ *	length and the next call which actually allocates and returns the secdata.
+ *	@secid contains the security ID.
+ *	@secdata contains the pointer that stores the converted security context.
+ *	@seclen pointer which contains the length of the data
+ * @secctx_to_secid:
+ *	Convert security context to secid.
+ *	@secid contains the pointer to the generated security ID.
+ *	@secdata contains the security context.
+ *
+ * @release_secctx:
+ *	Release the security context.
+ *	@secdata contains the security context.
+ *	@seclen contains the length of the security context.
+ *
+ * Security hooks for Audit
+ *
+ * @audit_rule_init:
+ *	Allocate and initialize an LSM audit rule structure.
+ *	@field contains the required Audit action. Fields flags are defined in include/linux/audit.h
+ *	@op contains the operator the rule uses.
+ *	@rulestr contains the context where the rule will be applied to.
+ *	@lsmrule contains a pointer to receive the result.
+ *	Return 0 if @lsmrule has been successfully set,
+ *	-EINVAL in case of an invalid rule.
+ *
+ * @audit_rule_known:
+ *	Specifies whether given @rule contains any fields related to current LSM.
+ *	@rule contains the audit rule of interest.
+ *	Return 1 in case of relation found, 0 otherwise.
+ *
+ * @audit_rule_match:
+ *	Determine if given @secid matches a rule previously approved
+ *	by @audit_rule_known.
+ *	@secid contains the security id in question.
+ *	@field contains the field which relates to current LSM.
+ *	@op contains the operator that will be used for matching.
+ *	@rule points to the audit rule that will be checked against.
+ *	@actx points to the audit context associated with the check.
+ *	Return 1 if secid matches the rule, 0 if it does not, -ERRNO on failure.
+ *
+ * @audit_rule_free:
+ *	Deallocate the LSM audit rule structure previously allocated by
+ *	audit_rule_init.
+ *	@rule contains the allocated rule
+ *
+ * @inode_notifysecctx:
+ *	Notify the security module of what the security context of an inode
+ *	should be.  Initializes the incore security context managed by the
+ *	security module for this inode.  Example usage:  NFS client invokes
+ *	this hook to initialize the security context in its incore inode to the
+ *	value provided by the server for the file when the server returned the
+ *	file's attributes to the client.
+ *
+ * 	Must be called with inode->i_mutex locked.
+ *
+ * 	@inode we wish to set the security context of.
+ * 	@ctx contains the string which we wish to set in the inode.
+ * 	@ctxlen contains the length of @ctx.
+ *
+ * @inode_setsecctx:
+ * 	Change the security context of an inode.  Updates the
+ * 	incore security context managed by the security module and invokes the
+ * 	fs code as needed (via __vfs_setxattr_noperm) to update any backing
+ * 	xattrs that represent the context.  Example usage:  NFS server invokes
+ * 	this hook to change the security context in its incore inode and on the
+ * 	backing filesystem to a value provided by the client on a SETATTR
+ * 	operation.
+ *
+ * 	Must be called with inode->i_mutex locked.
+ *
+ * 	@dentry contains the inode we wish to set the security context of.
+ * 	@ctx contains the string which we wish to set in the inode.
+ * 	@ctxlen contains the length of @ctx.
+ *
+ * @inode_getsecctx:
+ *	Returns a string containing all relevant security context information
+ *
+ * 	@inode we wish to get the security context of.
+ *	@ctx is a pointer in which to place the allocated security context.
+ *	@ctxlen points to the place to put the length of @ctx.
+ * This is the main security structure.
+ */
+struct security_operations {
+	char name[SECURITY_NAME_MAX + 1];
+
+	int (*ptrace_access_check) (struct task_struct *child, unsigned int mode);
+	int (*ptrace_traceme) (struct task_struct *parent);
+	int (*capget) (struct task_struct *target,
+		       kernel_cap_t *effective,
+		       kernel_cap_t *inheritable, kernel_cap_t *permitted);
+	int (*capset) (struct cred *new,
+		       const struct cred *old,
+		       const kernel_cap_t *effective,
+		       const kernel_cap_t *inheritable,
+		       const kernel_cap_t *permitted);
+	int (*capable) (const struct cred *cred, struct user_namespace *ns,
+			int cap, int audit);
+	int (*quotactl) (int cmds, int type, int id, struct super_block *sb);
+	int (*quota_on) (struct dentry *dentry);
+	int (*syslog) (int type);
+	int (*settime) (const struct timespec *ts, const struct timezone *tz);
+	int (*vm_enough_memory) (struct mm_struct *mm, long pages);
+
+	int (*bprm_set_creds) (struct linux_binprm *bprm);
+	int (*bprm_check_security) (struct linux_binprm *bprm);
+	int (*bprm_secureexec) (struct linux_binprm *bprm);
+	void (*bprm_committing_creds) (struct linux_binprm *bprm);
+	void (*bprm_committed_creds) (struct linux_binprm *bprm);
+
+	int (*sb_alloc_security) (struct super_block *sb);
+	void (*sb_free_security) (struct super_block *sb);
+	int (*sb_copy_data) (char *orig, char *copy);
+	int (*sb_remount) (struct super_block *sb, void *data);
+	int (*sb_kern_mount) (struct super_block *sb, int flags, void *data);
+	int (*sb_show_options) (struct seq_file *m, struct super_block *sb);
+	int (*sb_statfs) (struct dentry *dentry);
+	int (*sb_mount) (char *dev_name, struct path *path,
+			 char *type, unsigned long flags, void *data);
+	int (*sb_umount) (struct vfsmount *mnt, int flags);
+	int (*sb_pivotroot) (struct path *old_path,
+			     struct path *new_path);
+	int (*sb_set_mnt_opts) (struct super_block *sb,
+				struct security_mnt_opts *opts);
+	void (*sb_clone_mnt_opts) (const struct super_block *oldsb,
+				   struct super_block *newsb);
+	int (*sb_parse_opts_str) (char *options, struct security_mnt_opts *opts);
+
+#ifdef CONFIG_SECURITY_PATH
+	int (*path_unlink) (struct path *dir, struct dentry *dentry);
+	int (*path_mkdir) (struct path *dir, struct dentry *dentry, umode_t mode);
+	int (*path_rmdir) (struct path *dir, struct dentry *dentry);
+	int (*path_mknod) (struct path *dir, struct dentry *dentry, umode_t mode,
+			   unsigned int dev);
+	int (*path_truncate) (struct path *path);
+	int (*path_symlink) (struct path *dir, struct dentry *dentry,
+			     const char *old_name);
+	int (*path_link) (struct dentry *old_dentry, struct path *new_dir,
+			  struct dentry *new_dentry);
+	int (*path_rename) (struct path *old_dir, struct dentry *old_dentry,
+			    struct path *new_dir, struct dentry *new_dentry);
+	int (*path_chmod) (struct path *path, umode_t mode);
+	int (*path_chown) (struct path *path, uid_t uid, gid_t gid);
+	int (*path_chroot) (struct path *path);
+#endif
+
+	int (*inode_alloc_security) (struct inode *inode);
+	void (*inode_free_security) (struct inode *inode);
+	int (*inode_init_security) (struct inode *inode, struct inode *dir,
+				    const struct qstr *qstr, char **name,
+				    void **value, size_t *len);
+	int (*inode_create) (struct inode *dir,
+			     struct dentry *dentry, umode_t mode);
+	int (*inode_link) (struct dentry *old_dentry,
+			   struct inode *dir, struct dentry *new_dentry);
+	int (*inode_unlink) (struct inode *dir, struct dentry *dentry);
+	int (*inode_symlink) (struct inode *dir,
+			      struct dentry *dentry, const char *old_name);
+	int (*inode_mkdir) (struct inode *dir, struct dentry *dentry, umode_t mode);
+	int (*inode_rmdir) (struct inode *dir, struct dentry *dentry);
+	int (*inode_mknod) (struct inode *dir, struct dentry *dentry,
+			    umode_t mode, dev_t dev);
+	int (*inode_rename) (struct inode *old_dir, struct dentry *old_dentry,
+			     struct inode *new_dir, struct dentry *new_dentry);
+	int (*inode_readlink) (struct dentry *dentry);
+	int (*inode_follow_link) (struct dentry *dentry, struct nameidata *nd);
+	int (*inode_permission) (struct inode *inode, int mask);
+	int (*inode_setattr)	(struct dentry *dentry, struct iattr *attr);
+	int (*inode_getattr) (struct vfsmount *mnt, struct dentry *dentry);
+	int (*inode_setxattr) (struct dentry *dentry, const char *name,
+			       const void *value, size_t size, int flags);
+	void (*inode_post_setxattr) (struct dentry *dentry, const char *name,
+				     const void *value, size_t size, int flags);
+	int (*inode_getxattr) (struct dentry *dentry, const char *name);
+	int (*inode_listxattr) (struct dentry *dentry);
+	int (*inode_removexattr) (struct dentry *dentry, const char *name);
+	int (*inode_need_killpriv) (struct dentry *dentry);
+	int (*inode_killpriv) (struct dentry *dentry);
+	int (*inode_getsecurity) (const struct inode *inode, const char *name, void **buffer, bool alloc);
+	int (*inode_setsecurity) (struct inode *inode, const char *name, const void *value, size_t size, int flags);
+	int (*inode_listsecurity) (struct inode *inode, char *buffer, size_t buffer_size);
+	void (*inode_getsecid) (const struct inode *inode, u32 *secid);
+
+	int (*file_permission) (struct file *file, int mask);
+	int (*file_alloc_security) (struct file *file);
+	void (*file_free_security) (struct file *file);
+	int (*file_ioctl) (struct file *file, unsigned int cmd,
+			   unsigned long arg);
+	int (*file_mmap) (struct file *file,
+			  unsigned long reqprot, unsigned long prot,
+			  unsigned long flags, unsigned long addr,
+			  unsigned long addr_only);
+	int (*file_mprotect) (struct vm_area_struct *vma,
+			      unsigned long reqprot,
+			      unsigned long prot);
+	int (*file_lock) (struct file *file, unsigned int cmd);
+	int (*file_fcntl) (struct file *file, unsigned int cmd,
+			   unsigned long arg);
+	int (*file_set_fowner) (struct file *file);
+	int (*file_send_sigiotask) (struct task_struct *tsk,
+				    struct fown_struct *fown, int sig);
+	int (*file_receive) (struct file *file);
+	int (*dentry_open) (struct file *file, const struct cred *cred);
+
+	int (*task_create) (unsigned long clone_flags);
+	void (*task_free) (struct task_struct *task);
+	int (*cred_alloc_blank) (struct cred *cred, gfp_t gfp);
+	void (*cred_free) (struct cred *cred);
+	int (*cred_prepare)(struct cred *new, const struct cred *old,
+			    gfp_t gfp);
+	void (*cred_transfer)(struct cred *new, const struct cred *old);
+	int (*kernel_act_as)(struct cred *new, u32 secid);
+	int (*kernel_create_files_as)(struct cred *new, struct inode *inode);
+	int (*kernel_module_request)(char *kmod_name);
+	int (*task_fix_setuid) (struct cred *new, const struct cred *old,
+				int flags);
+	int (*task_setpgid) (struct task_struct *p, pid_t pgid);
+	int (*task_getpgid) (struct task_struct *p);
+	int (*task_getsid) (struct task_struct *p);
+	void (*task_getsecid) (struct task_struct *p, u32 *secid);
+	int (*task_setnice) (struct task_struct *p, int nice);
+	int (*task_setioprio) (struct task_struct *p, int ioprio);
+	int (*task_getioprio) (struct task_struct *p);
+	int (*task_setrlimit) (struct task_struct *p, unsigned int resource,
+			struct rlimit *new_rlim);
+	int (*task_setscheduler) (struct task_struct *p);
+	int (*task_getscheduler) (struct task_struct *p);
+	int (*task_movememory) (struct task_struct *p);
+	int (*task_kill) (struct task_struct *p,
+			  struct siginfo *info, int sig, u32 secid);
+	int (*task_wait) (struct task_struct *p);
+	int (*task_prctl) (int option, unsigned long arg2,
+			   unsigned long arg3, unsigned long arg4,
+			   unsigned long arg5);
+	void (*task_to_inode) (struct task_struct *p, struct inode *inode);
+
+	int (*ipc_permission) (struct kern_ipc_perm *ipcp, short flag);
+	void (*ipc_getsecid) (struct kern_ipc_perm *ipcp, u32 *secid);
+
+	int (*msg_msg_alloc_security) (struct msg_msg *msg);
+	void (*msg_msg_free_security) (struct msg_msg *msg);
+
+	int (*msg_queue_alloc_security) (struct msg_queue *msq);
+	void (*msg_queue_free_security) (struct msg_queue *msq);
+	int (*msg_queue_associate) (struct msg_queue *msq, int msqflg);
+	int (*msg_queue_msgctl) (struct msg_queue *msq, int cmd);
+	int (*msg_queue_msgsnd) (struct msg_queue *msq,
+				 struct msg_msg *msg, int msqflg);
+	int (*msg_queue_msgrcv) (struct msg_queue *msq,
+				 struct msg_msg *msg,
+				 struct task_struct *target,
+				 long type, int mode);
+
+	int (*shm_alloc_security) (struct shmid_kernel *shp);
+	void (*shm_free_security) (struct shmid_kernel *shp);
+	int (*shm_associate) (struct shmid_kernel *shp, int shmflg);
+	int (*shm_shmctl) (struct shmid_kernel *shp, int cmd);
+	int (*shm_shmat) (struct shmid_kernel *shp,
+			  char __user *shmaddr, int shmflg);
+
+	int (*sem_alloc_security) (struct sem_array *sma);
+	void (*sem_free_security) (struct sem_array *sma);
+	int (*sem_associate) (struct sem_array *sma, int semflg);
+	int (*sem_semctl) (struct sem_array *sma, int cmd);
+	int (*sem_semop) (struct sem_array *sma,
+			  struct sembuf *sops, unsigned nsops, int alter);
+
+	int (*netlink_send) (struct sock *sk, struct sk_buff *skb);
+
+	void (*d_instantiate) (struct dentry *dentry, struct inode *inode);
+
+	int (*getprocattr) (struct task_struct *p, char *name, char **value);
+	int (*setprocattr) (struct task_struct *p, char *name, void *value, size_t size);
+	int (*secid_to_secctx) (u32 secid, char **secdata, u32 *seclen);
+	int (*secctx_to_secid) (const char *secdata, u32 seclen, u32 *secid);
+	void (*release_secctx) (char *secdata, u32 seclen);
+
+	int (*inode_notifysecctx)(struct inode *inode, void *ctx, u32 ctxlen);
+	int (*inode_setsecctx)(struct dentry *dentry, void *ctx, u32 ctxlen);
+	int (*inode_getsecctx)(struct inode *inode, void **ctx, u32 *ctxlen);
+
+#ifdef CONFIG_SECURITY_NETWORK
+	int (*unix_stream_connect) (struct sock *sock, struct sock *other, struct sock *newsk);
+	int (*unix_may_send) (struct socket *sock, struct socket *other);
+
+	int (*socket_create) (int family, int type, int protocol, int kern);
+	int (*socket_post_create) (struct socket *sock, int family,
+				   int type, int protocol, int kern);
+	int (*socket_bind) (struct socket *sock,
+			    struct sockaddr *address, int addrlen);
+	int (*socket_connect) (struct socket *sock,
+			       struct sockaddr *address, int addrlen);
+	int (*socket_listen) (struct socket *sock, int backlog);
+	int (*socket_accept) (struct socket *sock, struct socket *newsock);
+	int (*socket_sendmsg) (struct socket *sock,
+			       struct msghdr *msg, int size);
+	int (*socket_recvmsg) (struct socket *sock,
+			       struct msghdr *msg, int size, int flags);
+	int (*socket_getsockname) (struct socket *sock);
+	int (*socket_getpeername) (struct socket *sock);
+	int (*socket_getsockopt) (struct socket *sock, int level, int optname);
+	int (*socket_setsockopt) (struct socket *sock, int level, int optname);
+	int (*socket_shutdown) (struct socket *sock, int how);
+	int (*socket_sock_rcv_skb) (struct sock *sk, struct sk_buff *skb);
+	int (*socket_getpeersec_stream) (struct socket *sock, char __user *optval, int __user *optlen, unsigned len);
+	int (*socket_getpeersec_dgram) (struct socket *sock, struct sk_buff *skb, u32 *secid);
+	int (*sk_alloc_security) (struct sock *sk, int family, gfp_t priority);
+	void (*sk_free_security) (struct sock *sk);
+	void (*sk_clone_security) (const struct sock *sk, struct sock *newsk);
+	void (*sk_getsecid) (struct sock *sk, u32 *secid);
+	void (*sock_graft) (struct sock *sk, struct socket *parent);
+	int (*inet_conn_request) (struct sock *sk, struct sk_buff *skb,
+				  struct request_sock *req);
+	void (*inet_csk_clone) (struct sock *newsk, const struct request_sock *req);
+	void (*inet_conn_established) (struct sock *sk, struct sk_buff *skb);
+	int (*secmark_relabel_packet) (u32 secid);
+	void (*secmark_refcount_inc) (void);
+	void (*secmark_refcount_dec) (void);
+	void (*req_classify_flow) (const struct request_sock *req, struct flowi *fl);
+	int (*tun_dev_create)(void);
+	void (*tun_dev_post_create)(struct sock *sk);
+	int (*tun_dev_attach)(struct sock *sk);
+#endif	/* CONFIG_SECURITY_NETWORK */
+
+#ifdef CONFIG_SECURITY_NETWORK_XFRM
+	int (*xfrm_policy_alloc_security) (struct xfrm_sec_ctx **ctxp,
+			struct xfrm_user_sec_ctx *sec_ctx);
+	int (*xfrm_policy_clone_security) (struct xfrm_sec_ctx *old_ctx, struct xfrm_sec_ctx **new_ctx);
+	void (*xfrm_policy_free_security) (struct xfrm_sec_ctx *ctx);
+	int (*xfrm_policy_delete_security) (struct xfrm_sec_ctx *ctx);
+	int (*xfrm_state_alloc_security) (struct xfrm_state *x,
+		struct xfrm_user_sec_ctx *sec_ctx,
+		u32 secid);
+	void (*xfrm_state_free_security) (struct xfrm_state *x);
+	int (*xfrm_state_delete_security) (struct xfrm_state *x);
+	int (*xfrm_policy_lookup) (struct xfrm_sec_ctx *ctx, u32 fl_secid, u8 dir);
+	int (*xfrm_state_pol_flow_match) (struct xfrm_state *x,
+					  struct xfrm_policy *xp,
+					  const struct flowi *fl);
+	int (*xfrm_decode_session) (struct sk_buff *skb, u32 *secid, int ckall);
+#endif	/* CONFIG_SECURITY_NETWORK_XFRM */
+
+	/* key management security hooks */
+#ifdef CONFIG_KEYS
+	int (*key_alloc) (struct key *key, const struct cred *cred, unsigned long flags);
+	void (*key_free) (struct key *key);
+	int (*key_permission) (key_ref_t key_ref,
+			       const struct cred *cred,
+			       key_perm_t perm);
+	int (*key_getsecurity)(struct key *key, char **_buffer);
+#endif	/* CONFIG_KEYS */
+
+#ifdef CONFIG_AUDIT
+	int (*audit_rule_init) (u32 field, u32 op, char *rulestr, void **lsmrule);
+	int (*audit_rule_known) (struct audit_krule *krule);
+	int (*audit_rule_match) (u32 secid, u32 field, u32 op, void *lsmrule,
+				 struct audit_context *actx);
+	void (*audit_rule_free) (void *lsmrule);
+#endif /* CONFIG_AUDIT */
+};
+
+/* prototypes */
+extern int security_init(void);
+extern int security_module_enable(struct security_operations *ops);
+extern int register_security(struct security_operations *ops);
+extern void __init security_fixup_ops(struct security_operations *ops);
+
+
+/* Security operations */
+int security_ptrace_access_check(struct task_struct *child, unsigned int mode);
+int security_ptrace_traceme(struct task_struct *parent);
+int security_capget(struct task_struct *target,
+		    kernel_cap_t *effective,
+		    kernel_cap_t *inheritable,
+		    kernel_cap_t *permitted);
+int security_capset(struct cred *new, const struct cred *old,
+		    const kernel_cap_t *effective,
+		    const kernel_cap_t *inheritable,
+		    const kernel_cap_t *permitted);
+int security_capable(const struct cred *cred, struct user_namespace *ns,
+			int cap);
+int security_capable_noaudit(const struct cred *cred, struct user_namespace *ns,
+			     int cap);
+int security_quotactl(int cmds, int type, int id, struct super_block *sb);
+int security_quota_on(struct dentry *dentry);
+int security_syslog(int type);
+int security_settime(const struct timespec *ts, const struct timezone *tz);
+int security_vm_enough_memory_mm(struct mm_struct *mm, long pages);
+int security_bprm_set_creds(struct linux_binprm *bprm);
+int security_bprm_check(struct linux_binprm *bprm);
+void security_bprm_committing_creds(struct linux_binprm *bprm);
+void security_bprm_committed_creds(struct linux_binprm *bprm);
+int security_bprm_secureexec(struct linux_binprm *bprm);
+int security_sb_alloc(struct super_block *sb);
+void security_sb_free(struct super_block *sb);
+int security_sb_copy_data(char *orig, char *copy);
+int security_sb_remount(struct super_block *sb, void *data);
+int security_sb_kern_mount(struct super_block *sb, int flags, void *data);
+int security_sb_show_options(struct seq_file *m, struct super_block *sb);
+int security_sb_statfs(struct dentry *dentry);
+int security_sb_mount(char *dev_name, struct path *path,
+		      char *type, unsigned long flags, void *data);
+int security_sb_umount(struct vfsmount *mnt, int flags);
+int security_sb_pivotroot(struct path *old_path, struct path *new_path);
+int security_sb_set_mnt_opts(struct super_block *sb, struct security_mnt_opts *opts);
+void security_sb_clone_mnt_opts(const struct super_block *oldsb,
+				struct super_block *newsb);
+int security_sb_parse_opts_str(char *options, struct security_mnt_opts *opts);
+
+int security_inode_alloc(struct inode *inode);
+void security_inode_free(struct inode *inode);
+int security_inode_init_security(struct inode *inode, struct inode *dir,
+				 const struct qstr *qstr,
+				 initxattrs initxattrs, void *fs_data);
+int security_old_inode_init_security(struct inode *inode, struct inode *dir,
+				     const struct qstr *qstr, char **name,
+				     void **value, size_t *len);
+int security_inode_create(struct inode *dir, struct dentry *dentry, umode_t mode);
+int security_inode_link(struct dentry *old_dentry, struct inode *dir,
+			 struct dentry *new_dentry);
+int security_inode_unlink(struct inode *dir, struct dentry *dentry);
+int security_inode_symlink(struct inode *dir, struct dentry *dentry,
+			   const char *old_name);
+int security_inode_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode);
+int security_inode_rmdir(struct inode *dir, struct dentry *dentry);
+int security_inode_mknod(struct inode *dir, struct dentry *dentry, umode_t mode, dev_t dev);
+int security_inode_rename(struct inode *old_dir, struct dentry *old_dentry,
+			  struct inode *new_dir, struct dentry *new_dentry);
+int security_inode_readlink(struct dentry *dentry);
+int security_inode_follow_link(struct dentry *dentry, struct nameidata *nd);
+int security_inode_permission(struct inode *inode, int mask);
+int security_inode_setattr(struct dentry *dentry, struct iattr *attr);
+int security_inode_getattr(struct vfsmount *mnt, struct dentry *dentry);
+int security_inode_setxattr(struct dentry *dentry, const char *name,
+			    const void *value, size_t size, int flags);
+void security_inode_post_setxattr(struct dentry *dentry, const char *name,
+				  const void *value, size_t size, int flags);
+int security_inode_getxattr(struct dentry *dentry, const char *name);
+int security_inode_listxattr(struct dentry *dentry);
+int security_inode_removexattr(struct dentry *dentry, const char *name);
+int security_inode_need_killpriv(struct dentry *dentry);
+int security_inode_killpriv(struct dentry *dentry);
+int security_inode_getsecurity(const struct inode *inode, const char *name, void **buffer, bool alloc);
+int security_inode_setsecurity(struct inode *inode, const char *name, const void *value, size_t size, int flags);
+int security_inode_listsecurity(struct inode *inode, char *buffer, size_t buffer_size);
+void security_inode_getsecid(const struct inode *inode, u32 *secid);
+int security_file_permission(struct file *file, int mask);
+int security_file_alloc(struct file *file);
+void security_file_free(struct file *file);
+int security_file_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
+int security_file_mmap(struct file *file, unsigned long reqprot,
+			unsigned long prot, unsigned long flags,
+			unsigned long addr, unsigned long addr_only);
+int security_file_mprotect(struct vm_area_struct *vma, unsigned long reqprot,
+			   unsigned long prot);
+int security_file_lock(struct file *file, unsigned int cmd);
+int security_file_fcntl(struct file *file, unsigned int cmd, unsigned long arg);
+int security_file_set_fowner(struct file *file);
+int security_file_send_sigiotask(struct task_struct *tsk,
+				 struct fown_struct *fown, int sig);
+int security_file_receive(struct file *file);
+int security_dentry_open(struct file *file, const struct cred *cred);
+int security_task_create(unsigned long clone_flags);
+void security_task_free(struct task_struct *task);
+int security_cred_alloc_blank(struct cred *cred, gfp_t gfp);
+void security_cred_free(struct cred *cred);
+int security_prepare_creds(struct cred *new, const struct cred *old, gfp_t gfp);
+void security_transfer_creds(struct cred *new, const struct cred *old);
+int security_kernel_act_as(struct cred *new, u32 secid);
+int security_kernel_create_files_as(struct cred *new, struct inode *inode);
+int security_kernel_module_request(char *kmod_name);
+int security_task_fix_setuid(struct cred *new, const struct cred *old,
+			     int flags);
+int security_task_setpgid(struct task_struct *p, pid_t pgid);
+int security_task_getpgid(struct task_struct *p);
+int security_task_getsid(struct task_struct *p);
+void security_task_getsecid(struct task_struct *p, u32 *secid);
+int security_task_setnice(struct task_struct *p, int nice);
+int security_task_setioprio(struct task_struct *p, int ioprio);
+int security_task_getioprio(struct task_struct *p);
+int security_task_setrlimit(struct task_struct *p, unsigned int resource,
+		struct rlimit *new_rlim);
+int security_task_setscheduler(struct task_struct *p);
+int security_task_getscheduler(struct task_struct *p);
+int security_task_movememory(struct task_struct *p);
+int security_task_kill(struct task_struct *p, struct siginfo *info,
+			int sig, u32 secid);
+int security_task_wait(struct task_struct *p);
+int security_task_prctl(int option, unsigned long arg2, unsigned long arg3,
+			unsigned long arg4, unsigned long arg5);
+void security_task_to_inode(struct task_struct *p, struct inode *inode);
+int security_ipc_permission(struct kern_ipc_perm *ipcp, short flag);
+void security_ipc_getsecid(struct kern_ipc_perm *ipcp, u32 *secid);
+int security_msg_msg_alloc(struct msg_msg *msg);
+void security_msg_msg_free(struct msg_msg *msg);
+int security_msg_queue_alloc(struct msg_queue *msq);
+void security_msg_queue_free(struct msg_queue *msq);
+int security_msg_queue_associate(struct msg_queue *msq, int msqflg);
+int security_msg_queue_msgctl(struct msg_queue *msq, int cmd);
+int security_msg_queue_msgsnd(struct msg_queue *msq,
+			      struct msg_msg *msg, int msqflg);
+int security_msg_queue_msgrcv(struct msg_queue *msq, struct msg_msg *msg,
+			      struct task_struct *target, long type, int mode);
+int security_shm_alloc(struct shmid_kernel *shp);
+void security_shm_free(struct shmid_kernel *shp);
+int security_shm_associate(struct shmid_kernel *shp, int shmflg);
+int security_shm_shmctl(struct shmid_kernel *shp, int cmd);
+int security_shm_shmat(struct shmid_kernel *shp, char __user *shmaddr, int shmflg);
+int security_sem_alloc(struct sem_array *sma);
+void security_sem_free(struct sem_array *sma);
+int security_sem_associate(struct sem_array *sma, int semflg);
+int security_sem_semctl(struct sem_array *sma, int cmd);
+int security_sem_semop(struct sem_array *sma, struct sembuf *sops,
+			unsigned nsops, int alter);
+void security_d_instantiate(struct dentry *dentry, struct inode *inode);
+int security_getprocattr(struct task_struct *p, char *name, char **value);
+int security_setprocattr(struct task_struct *p, char *name, void *value, size_t size);
+int security_netlink_send(struct sock *sk, struct sk_buff *skb);
+int security_secid_to_secctx(u32 secid, char **secdata, u32 *seclen);
+int security_secctx_to_secid(const char *secdata, u32 seclen, u32 *secid);
+void security_release_secctx(char *secdata, u32 seclen);
+
+int security_inode_notifysecctx(struct inode *inode, void *ctx, u32 ctxlen);
+int security_inode_setsecctx(struct dentry *dentry, void *ctx, u32 ctxlen);
+int security_inode_getsecctx(struct inode *inode, void **ctx, u32 *ctxlen);
+#else /* CONFIG_SECURITY */
+struct security_mnt_opts {
+};
+
+static inline void security_init_mnt_opts(struct security_mnt_opts *opts)
+{
+}
+
+static inline void security_free_mnt_opts(struct security_mnt_opts *opts)
+{
+}
+
+/*
+ * This is the default capabilities functionality.  Most of these functions
+ * are just stubbed out, but a few must call the proper capable code.
+ */
+
+static inline int security_init(void)
+{
+	return 0;
+}
+
+static inline int security_ptrace_access_check(struct task_struct *child,
+					     unsigned int mode)
+{
+	return cap_ptrace_access_check(child, mode);
+}
+
+static inline int security_ptrace_traceme(struct task_struct *parent)
+{
+	return cap_ptrace_traceme(parent);
+}
+
+static inline int security_capget(struct task_struct *target,
+				   kernel_cap_t *effective,
+				   kernel_cap_t *inheritable,
+				   kernel_cap_t *permitted)
+{
+	return cap_capget(target, effective, inheritable, permitted);
+}
+
+static inline int security_capset(struct cred *new,
+				   const struct cred *old,
+				   const kernel_cap_t *effective,
+				   const kernel_cap_t *inheritable,
+				   const kernel_cap_t *permitted)
+{
+	return cap_capset(new, old, effective, inheritable, permitted);
+}
+
+static inline int security_capable(const struct cred *cred,
+				   struct user_namespace *ns, int cap)
+{
+	return cap_capable(cred, ns, cap, SECURITY_CAP_AUDIT);
+}
+
+static inline int security_capable_noaudit(const struct cred *cred,
+					   struct user_namespace *ns, int cap) {
+	return cap_capable(cred, ns, cap, SECURITY_CAP_NOAUDIT);
+}
+
+static inline int security_quotactl(int cmds, int type, int id,
+				     struct super_block *sb)
+{
+	return 0;
+}
+
+static inline int security_quota_on(struct dentry *dentry)
+{
+	return 0;
+}
+
+static inline int security_syslog(int type)
+{
+	return 0;
+}
+
+static inline int security_settime(const struct timespec *ts,
+				   const struct timezone *tz)
+{
+	return cap_settime(ts, tz);
+}
+
+static inline int security_vm_enough_memory_mm(struct mm_struct *mm, long pages)
+{
+	return cap_vm_enough_memory(mm, pages);
+}
+
+static inline int security_bprm_set_creds(struct linux_binprm *bprm)
+{
+	return cap_bprm_set_creds(bprm);
+}
+
+static inline int security_bprm_check(struct linux_binprm *bprm)
+{
+	return 0;
+}
+
+static inline void security_bprm_committing_creds(struct linux_binprm *bprm)
+{
+}
+
+static inline void security_bprm_committed_creds(struct linux_binprm *bprm)
+{
+}
+
+static inline int security_bprm_secureexec(struct linux_binprm *bprm)
+{
+	return cap_bprm_secureexec(bprm);
+}
+
+static inline int security_sb_alloc(struct super_block *sb)
+{
+	return 0;
+}
+
+static inline void security_sb_free(struct super_block *sb)
+{ }
+
+static inline int security_sb_copy_data(char *orig, char *copy)
+{
+	return 0;
+}
+
+static inline int security_sb_remount(struct super_block *sb, void *data)
+{
+	return 0;
+}
+
+static inline int security_sb_kern_mount(struct super_block *sb, int flags, void *data)
+{
+	return 0;
+}
+
+static inline int security_sb_show_options(struct seq_file *m,
+					   struct super_block *sb)
+{
+	return 0;
+}
+
+static inline int security_sb_statfs(struct dentry *dentry)
+{
+	return 0;
+}
+
+static inline int security_sb_mount(char *dev_name, struct path *path,
+				    char *type, unsigned long flags,
+				    void *data)
+{
+	return 0;
+}
+
+static inline int security_sb_umount(struct vfsmount *mnt, int flags)
+{
+	return 0;
+}
+
+static inline int security_sb_pivotroot(struct path *old_path,
+					struct path *new_path)
+{
+	return 0;
+}
+
+static inline int security_sb_set_mnt_opts(struct super_block *sb,
+					   struct security_mnt_opts *opts)
+{
+	return 0;
+}
+
+static inline void security_sb_clone_mnt_opts(const struct super_block *oldsb,
+					      struct super_block *newsb)
+{ }
+
+static inline int security_sb_parse_opts_str(char *options, struct security_mnt_opts *opts)
+{
+	return 0;
+}
+
+static inline int security_inode_alloc(struct inode *inode)
+{
+	return 0;
+}
+
+static inline void security_inode_free(struct inode *inode)
+{ }
+
+static inline int security_inode_init_security(struct inode *inode,
+						struct inode *dir,
+						const struct qstr *qstr,
+						const initxattrs initxattrs,
+						void *fs_data)
+{
+	return 0;
+}
+
+static inline int security_old_inode_init_security(struct inode *inode,
+						   struct inode *dir,
+						   const struct qstr *qstr,
+						   char **name, void **value,
+						   size_t *len)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int security_inode_create(struct inode *dir,
+					 struct dentry *dentry,
+					 umode_t mode)
+{
+	return 0;
+}
+
+static inline int security_inode_link(struct dentry *old_dentry,
+				       struct inode *dir,
+				       struct dentry *new_dentry)
+{
+	return 0;
+}
+
+static inline int security_inode_unlink(struct inode *dir,
+					 struct dentry *dentry)
+{
+	return 0;
+}
+
+static inline int security_inode_symlink(struct inode *dir,
+					  struct dentry *dentry,
+					  const char *old_name)
+{
+	return 0;
+}
+
+static inline int security_inode_mkdir(struct inode *dir,
+					struct dentry *dentry,
+					int mode)
+{
+	return 0;
+}
+
+static inline int security_inode_rmdir(struct inode *dir,
+					struct dentry *dentry)
+{
+	return 0;
+}
+
+static inline int security_inode_mknod(struct inode *dir,
+					struct dentry *dentry,
+					int mode, dev_t dev)
+{
+	return 0;
+}
+
+static inline int security_inode_rename(struct inode *old_dir,
+					 struct dentry *old_dentry,
+					 struct inode *new_dir,
+					 struct dentry *new_dentry)
+{
+	return 0;
+}
+
+static inline int security_inode_readlink(struct dentry *dentry)
+{
+	return 0;
+}
+
+static inline int security_inode_follow_link(struct dentry *dentry,
+					      struct nameidata *nd)
+{
+	return 0;
+}
+
+static inline int security_inode_permission(struct inode *inode, int mask)
+{
+	return 0;
+}
+
+static inline int security_inode_setattr(struct dentry *dentry,
+					  struct iattr *attr)
+{
+	return 0;
+}
+
+static inline int security_inode_getattr(struct vfsmount *mnt,
+					  struct dentry *dentry)
+{
+	return 0;
+}
+
+static inline int security_inode_setxattr(struct dentry *dentry,
+		const char *name, const void *value, size_t size, int flags)
+{
+	return cap_inode_setxattr(dentry, name, value, size, flags);
+}
+
+static inline void security_inode_post_setxattr(struct dentry *dentry,
+		const char *name, const void *value, size_t size, int flags)
+{ }
+
+static inline int security_inode_getxattr(struct dentry *dentry,
+			const char *name)
+{
+	return 0;
+}
+
+static inline int security_inode_listxattr(struct dentry *dentry)
+{
+	return 0;
+}
+
+static inline int security_inode_removexattr(struct dentry *dentry,
+			const char *name)
+{
+	return cap_inode_removexattr(dentry, name);
+}
+
+static inline int security_inode_need_killpriv(struct dentry *dentry)
+{
+	return cap_inode_need_killpriv(dentry);
+}
+
+static inline int security_inode_killpriv(struct dentry *dentry)
+{
+	return cap_inode_killpriv(dentry);
+}
+
+static inline int security_inode_getsecurity(const struct inode *inode, const char *name, void **buffer, bool alloc)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int security_inode_setsecurity(struct inode *inode, const char *name, const void *value, size_t size, int flags)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int security_inode_listsecurity(struct inode *inode, char *buffer, size_t buffer_size)
+{
+	return 0;
+}
+
+static inline void security_inode_getsecid(const struct inode *inode, u32 *secid)
+{
+	*secid = 0;
+}
+
+static inline int security_file_permission(struct file *file, int mask)
+{
+	return 0;
+}
+
+static inline int security_file_alloc(struct file *file)
+{
+	return 0;
+}
+
+static inline void security_file_free(struct file *file)
+{ }
+
+static inline int security_file_ioctl(struct file *file, unsigned int cmd,
+				      unsigned long arg)
+{
+	return 0;
+}
+
+static inline int security_file_mmap(struct file *file, unsigned long reqprot,
+				     unsigned long prot,
+				     unsigned long flags,
+				     unsigned long addr,
+				     unsigned long addr_only)
+{
+	return cap_file_mmap(file, reqprot, prot, flags, addr, addr_only);
+}
+
+static inline int security_file_mprotect(struct vm_area_struct *vma,
+					 unsigned long reqprot,
+					 unsigned long prot)
+{
+	return 0;
+}
+
+static inline int security_file_lock(struct file *file, unsigned int cmd)
+{
+	return 0;
+}
+
+static inline int security_file_fcntl(struct file *file, unsigned int cmd,
+				      unsigned long arg)
+{
+	return 0;
+}
+
+static inline int security_file_set_fowner(struct file *file)
+{
+	return 0;
+}
+
+static inline int security_file_send_sigiotask(struct task_struct *tsk,
+					       struct fown_struct *fown,
+					       int sig)
+{
+	return 0;
+}
+
+static inline int security_file_receive(struct file *file)
+{
+	return 0;
+}
+
+static inline int security_dentry_open(struct file *file,
+				       const struct cred *cred)
+{
+	return 0;
+}
+
+static inline int security_task_create(unsigned long clone_flags)
+{
+	return 0;
+}
+
+static inline void security_task_free(struct task_struct *task)
+{ }
+
+static inline int security_cred_alloc_blank(struct cred *cred, gfp_t gfp)
+{
+	return 0;
+}
+
+static inline void security_cred_free(struct cred *cred)
+{ }
+
+static inline int security_prepare_creds(struct cred *new,
+					 const struct cred *old,
+					 gfp_t gfp)
+{
+	return 0;
+}
+
+static inline void security_transfer_creds(struct cred *new,
+					   const struct cred *old)
+{
+}
+
+static inline int security_kernel_act_as(struct cred *cred, u32 secid)
+{
+	return 0;
+}
+
+static inline int security_kernel_create_files_as(struct cred *cred,
+						  struct inode *inode)
+{
+	return 0;
+}
+
+static inline int security_kernel_module_request(char *kmod_name)
+{
+	return 0;
+}
+
+static inline int security_task_fix_setuid(struct cred *new,
+					   const struct cred *old,
+					   int flags)
+{
+	return cap_task_fix_setuid(new, old, flags);
+}
+
+static inline int security_task_setpgid(struct task_struct *p, pid_t pgid)
+{
+	return 0;
+}
+
+static inline int security_task_getpgid(struct task_struct *p)
+{
+	return 0;
+}
+
+static inline int security_task_getsid(struct task_struct *p)
+{
+	return 0;
+}
+
+static inline void security_task_getsecid(struct task_struct *p, u32 *secid)
+{
+	*secid = 0;
+}
+
+static inline int security_task_setnice(struct task_struct *p, int nice)
+{
+	return cap_task_setnice(p, nice);
+}
+
+static inline int security_task_setioprio(struct task_struct *p, int ioprio)
+{
+	return cap_task_setioprio(p, ioprio);
+}
+
+static inline int security_task_getioprio(struct task_struct *p)
+{
+	return 0;
+}
+
+static inline int security_task_setrlimit(struct task_struct *p,
+					  unsigned int resource,
+					  struct rlimit *new_rlim)
+{
+	return 0;
+}
+
+static inline int security_task_setscheduler(struct task_struct *p)
+{
+	return cap_task_setscheduler(p);
+}
+
+static inline int security_task_getscheduler(struct task_struct *p)
+{
+	return 0;
+}
+
+static inline int security_task_movememory(struct task_struct *p)
+{
+	return 0;
+}
+
+static inline int security_task_kill(struct task_struct *p,
+				     struct siginfo *info, int sig,
+				     u32 secid)
+{
+	return 0;
+}
+
+static inline int security_task_wait(struct task_struct *p)
+{
+	return 0;
+}
+
+static inline int security_task_prctl(int option, unsigned long arg2,
+				      unsigned long arg3,
+				      unsigned long arg4,
+				      unsigned long arg5)
+{
+	return cap_task_prctl(option, arg2, arg3, arg3, arg5);
+}
+
+static inline void security_task_to_inode(struct task_struct *p, struct inode *inode)
+{ }
+
+static inline int security_ipc_permission(struct kern_ipc_perm *ipcp,
+					  short flag)
+{
+	return 0;
+}
+
+static inline void security_ipc_getsecid(struct kern_ipc_perm *ipcp, u32 *secid)
+{
+	*secid = 0;
+}
+
+static inline int security_msg_msg_alloc(struct msg_msg *msg)
+{
+	return 0;
+}
+
+static inline void security_msg_msg_free(struct msg_msg *msg)
+{ }
+
+static inline int security_msg_queue_alloc(struct msg_queue *msq)
+{
+	return 0;
+}
+
+static inline void security_msg_queue_free(struct msg_queue *msq)
+{ }
+
+static inline int security_msg_queue_associate(struct msg_queue *msq,
+					       int msqflg)
+{
+	return 0;
+}
+
+static inline int security_msg_queue_msgctl(struct msg_queue *msq, int cmd)
+{
+	return 0;
+}
+
+static inline int security_msg_queue_msgsnd(struct msg_queue *msq,
+					    struct msg_msg *msg, int msqflg)
+{
+	return 0;
+}
+
+static inline int security_msg_queue_msgrcv(struct msg_queue *msq,
+					    struct msg_msg *msg,
+					    struct task_struct *target,
+					    long type, int mode)
+{
+	return 0;
+}
+
+static inline int security_shm_alloc(struct shmid_kernel *shp)
+{
+	return 0;
+}
+
+static inline void security_shm_free(struct shmid_kernel *shp)
+{ }
+
+static inline int security_shm_associate(struct shmid_kernel *shp,
+					 int shmflg)
+{
+	return 0;
+}
+
+static inline int security_shm_shmctl(struct shmid_kernel *shp, int cmd)
+{
+	return 0;
+}
+
+static inline int security_shm_shmat(struct shmid_kernel *shp,
+				     char __user *shmaddr, int shmflg)
+{
+	return 0;
+}
+
+static inline int security_sem_alloc(struct sem_array *sma)
+{
+	return 0;
+}
+
+static inline void security_sem_free(struct sem_array *sma)
+{ }
+
+static inline int security_sem_associate(struct sem_array *sma, int semflg)
+{
+	return 0;
+}
+
+static inline int security_sem_semctl(struct sem_array *sma, int cmd)
+{
+	return 0;
+}
+
+static inline int security_sem_semop(struct sem_array *sma,
+				     struct sembuf *sops, unsigned nsops,
+				     int alter)
+{
+	return 0;
+}
+
+static inline void security_d_instantiate(struct dentry *dentry, struct inode *inode)
+{ }
+
+static inline int security_getprocattr(struct task_struct *p, char *name, char **value)
+{
+	return -EINVAL;
+}
+
+static inline int security_setprocattr(struct task_struct *p, char *name, void *value, size_t size)
+{
+	return -EINVAL;
+}
+
+static inline int security_netlink_send(struct sock *sk, struct sk_buff *skb)
+{
+	return cap_netlink_send(sk, skb);
+}
+
+static inline int security_secid_to_secctx(u32 secid, char **secdata, u32 *seclen)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int security_secctx_to_secid(const char *secdata,
+					   u32 seclen,
+					   u32 *secid)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline void security_release_secctx(char *secdata, u32 seclen)
+{
+}
+
+static inline int security_inode_notifysecctx(struct inode *inode, void *ctx, u32 ctxlen)
+{
+	return -EOPNOTSUPP;
+}
+static inline int security_inode_setsecctx(struct dentry *dentry, void *ctx, u32 ctxlen)
+{
+	return -EOPNOTSUPP;
+}
+static inline int security_inode_getsecctx(struct inode *inode, void **ctx, u32 *ctxlen)
+{
+	return -EOPNOTSUPP;
+}
+#endif	/* CONFIG_SECURITY */
+
+#ifdef CONFIG_SECURITY_NETWORK
+
+int security_unix_stream_connect(struct sock *sock, struct sock *other, struct sock *newsk);
+int security_unix_may_send(struct socket *sock,  struct socket *other);
+int security_socket_create(int family, int type, int protocol, int kern);
+int security_socket_post_create(struct socket *sock, int family,
+				int type, int protocol, int kern);
+int security_socket_bind(struct socket *sock, struct sockaddr *address, int addrlen);
+int security_socket_connect(struct socket *sock, struct sockaddr *address, int addrlen);
+int security_socket_listen(struct socket *sock, int backlog);
+int security_socket_accept(struct socket *sock, struct socket *newsock);
+int security_socket_sendmsg(struct socket *sock, struct msghdr *msg, int size);
+int security_socket_recvmsg(struct socket *sock, struct msghdr *msg,
+			    int size, int flags);
+int security_socket_getsockname(struct socket *sock);
+int security_socket_getpeername(struct socket *sock);
+int security_socket_getsockopt(struct socket *sock, int level, int optname);
+int security_socket_setsockopt(struct socket *sock, int level, int optname);
+int security_socket_shutdown(struct socket *sock, int how);
+int security_sock_rcv_skb(struct sock *sk, struct sk_buff *skb);
+int security_socket_getpeersec_stream(struct socket *sock, char __user *optval,
+				      int __user *optlen, unsigned len);
+int security_socket_getpeersec_dgram(struct socket *sock, struct sk_buff *skb, u32 *secid);
+int security_sk_alloc(struct sock *sk, int family, gfp_t priority);
+void security_sk_free(struct sock *sk);
+void security_sk_clone(const struct sock *sk, struct sock *newsk);
+void security_sk_classify_flow(struct sock *sk, struct flowi *fl);
+void security_req_classify_flow(const struct request_sock *req, struct flowi *fl);
+void security_sock_graft(struct sock*sk, struct socket *parent);
+int security_inet_conn_request(struct sock *sk,
+			struct sk_buff *skb, struct request_sock *req);
+void security_inet_csk_clone(struct sock *newsk,
+			const struct request_sock *req);
+void security_inet_conn_established(struct sock *sk,
+			struct sk_buff *skb);
+int security_secmark_relabel_packet(u32 secid);
+void security_secmark_refcount_inc(void);
+void security_secmark_refcount_dec(void);
+int security_tun_dev_create(void);
+void security_tun_dev_post_create(struct sock *sk);
+int security_tun_dev_attach(struct sock *sk);
+
+#else	/* CONFIG_SECURITY_NETWORK */
+static inline int security_unix_stream_connect(struct sock *sock,
+					       struct sock *other,
+					       struct sock *newsk)
+{
+	return 0;
+}
+
+static inline int security_unix_may_send(struct socket *sock,
+					 struct socket *other)
+{
+	return 0;
+}
+
+static inline int security_socket_create(int family, int type,
+					 int protocol, int kern)
+{
+	return 0;
+}
+
+static inline int security_socket_post_create(struct socket *sock,
+					      int family,
+					      int type,
+					      int protocol, int kern)
+{
+	return 0;
+}
+
+static inline int security_socket_bind(struct socket *sock,
+				       struct sockaddr *address,
+				       int addrlen)
+{
+	return 0;
+}
+
+static inline int security_socket_connect(struct socket *sock,
+					  struct sockaddr *address,
+					  int addrlen)
+{
+	return 0;
+}
+
+static inline int security_socket_listen(struct socket *sock, int backlog)
+{
+	return 0;
+}
+
+static inline int security_socket_accept(struct socket *sock,
+					 struct socket *newsock)
+{
+	return 0;
+}
+
+static inline int security_socket_sendmsg(struct socket *sock,
+					  struct msghdr *msg, int size)
+{
+	return 0;
+}
+
+static inline int security_socket_recvmsg(struct socket *sock,
+					  struct msghdr *msg, int size,
+					  int flags)
+{
+	return 0;
+}
+
+static inline int security_socket_getsockname(struct socket *sock)
+{
+	return 0;
+}
+
+static inline int security_socket_getpeername(struct socket *sock)
+{
+	return 0;
+}
+
+static inline int security_socket_getsockopt(struct socket *sock,
+					     int level, int optname)
+{
+	return 0;
+}
+
+static inline int security_socket_setsockopt(struct socket *sock,
+					     int level, int optname)
+{
+	return 0;
+}
+
+static inline int security_socket_shutdown(struct socket *sock, int how)
+{
+	return 0;
+}
+static inline int security_sock_rcv_skb(struct sock *sk,
+					struct sk_buff *skb)
+{
+	return 0;
+}
+
+static inline int security_socket_getpeersec_stream(struct socket *sock, char __user *optval,
+						    int __user *optlen, unsigned len)
+{
+	return -ENOPROTOOPT;
+}
+
+static inline int security_socket_getpeersec_dgram(struct socket *sock, struct sk_buff *skb, u32 *secid)
+{
+	return -ENOPROTOOPT;
+}
+
+static inline int security_sk_alloc(struct sock *sk, int family, gfp_t priority)
+{
+	return 0;
+}
+
+static inline void security_sk_free(struct sock *sk)
+{
+}
+
+static inline void security_sk_clone(const struct sock *sk, struct sock *newsk)
+{
+}
+
+static inline void security_sk_classify_flow(struct sock *sk, struct flowi *fl)
+{
+}
+
+static inline void security_req_classify_flow(const struct request_sock *req, struct flowi *fl)
+{
+}
+
+static inline void security_sock_graft(struct sock *sk, struct socket *parent)
+{
+}
+
+static inline int security_inet_conn_request(struct sock *sk,
+			struct sk_buff *skb, struct request_sock *req)
+{
+	return 0;
+}
+
+static inline void security_inet_csk_clone(struct sock *newsk,
+			const struct request_sock *req)
+{
+}
+
+static inline void security_inet_conn_established(struct sock *sk,
+			struct sk_buff *skb)
+{
+}
+
+static inline int security_secmark_relabel_packet(u32 secid)
+{
+	return 0;
+}
+
+static inline void security_secmark_refcount_inc(void)
+{
+}
+
+static inline void security_secmark_refcount_dec(void)
+{
+}
+
+static inline int security_tun_dev_create(void)
+{
+	return 0;
+}
+
+static inline void security_tun_dev_post_create(struct sock *sk)
+{
+}
+
+static inline int security_tun_dev_attach(struct sock *sk)
+{
+	return 0;
+}
+#endif	/* CONFIG_SECURITY_NETWORK */
+
+#ifdef CONFIG_SECURITY_NETWORK_XFRM
+
+int security_xfrm_policy_alloc(struct xfrm_sec_ctx **ctxp, struct xfrm_user_sec_ctx *sec_ctx);
+int security_xfrm_policy_clone(struct xfrm_sec_ctx *old_ctx, struct xfrm_sec_ctx **new_ctxp);
+void security_xfrm_policy_free(struct xfrm_sec_ctx *ctx);
+int security_xfrm_policy_delete(struct xfrm_sec_ctx *ctx);
+int security_xfrm_state_alloc(struct xfrm_state *x, struct xfrm_user_sec_ctx *sec_ctx);
+int security_xfrm_state_alloc_acquire(struct xfrm_state *x,
+				      struct xfrm_sec_ctx *polsec, u32 secid);
+int security_xfrm_state_delete(struct xfrm_state *x);
+void security_xfrm_state_free(struct xfrm_state *x);
+int security_xfrm_policy_lookup(struct xfrm_sec_ctx *ctx, u32 fl_secid, u8 dir);
+int security_xfrm_state_pol_flow_match(struct xfrm_state *x,
+				       struct xfrm_policy *xp,
+				       const struct flowi *fl);
+int security_xfrm_decode_session(struct sk_buff *skb, u32 *secid);
+void security_skb_classify_flow(struct sk_buff *skb, struct flowi *fl);
+
+#else	/* CONFIG_SECURITY_NETWORK_XFRM */
+
+static inline int security_xfrm_policy_alloc(struct xfrm_sec_ctx **ctxp, struct xfrm_user_sec_ctx *sec_ctx)
+{
+	return 0;
+}
+
+static inline int security_xfrm_policy_clone(struct xfrm_sec_ctx *old, struct xfrm_sec_ctx **new_ctxp)
+{
+	return 0;
+}
+
+static inline void security_xfrm_policy_free(struct xfrm_sec_ctx *ctx)
+{
+}
+
+static inline int security_xfrm_policy_delete(struct xfrm_sec_ctx *ctx)
+{
+	return 0;
+}
+
+static inline int security_xfrm_state_alloc(struct xfrm_state *x,
+					struct xfrm_user_sec_ctx *sec_ctx)
+{
+	return 0;
+}
+
+static inline int security_xfrm_state_alloc_acquire(struct xfrm_state *x,
+					struct xfrm_sec_ctx *polsec, u32 secid)
+{
+	return 0;
+}
+
+static inline void security_xfrm_state_free(struct xfrm_state *x)
+{
+}
+
+static inline int security_xfrm_state_delete(struct xfrm_state *x)
+{
+	return 0;
+}
+
+static inline int security_xfrm_policy_lookup(struct xfrm_sec_ctx *ctx, u32 fl_secid, u8 dir)
+{
+	return 0;
+}
+
+static inline int security_xfrm_state_pol_flow_match(struct xfrm_state *x,
+			struct xfrm_policy *xp, const struct flowi *fl)
+{
+	return 1;
+}
+
+static inline int security_xfrm_decode_session(struct sk_buff *skb, u32 *secid)
+{
+	return 0;
+}
+
+static inline void security_skb_classify_flow(struct sk_buff *skb, struct flowi *fl)
+{
+}
+
+#endif	/* CONFIG_SECURITY_NETWORK_XFRM */
+
+#ifdef CONFIG_SECURITY_PATH
+int security_path_unlink(struct path *dir, struct dentry *dentry);
+int security_path_mkdir(struct path *dir, struct dentry *dentry, umode_t mode);
+int security_path_rmdir(struct path *dir, struct dentry *dentry);
+int security_path_mknod(struct path *dir, struct dentry *dentry, umode_t mode,
+			unsigned int dev);
+int security_path_truncate(struct path *path);
+int security_path_symlink(struct path *dir, struct dentry *dentry,
+			  const char *old_name);
+int security_path_link(struct dentry *old_dentry, struct path *new_dir,
+		       struct dentry *new_dentry);
+int security_path_rename(struct path *old_dir, struct dentry *old_dentry,
+			 struct path *new_dir, struct dentry *new_dentry);
+int security_path_chmod(struct path *path, umode_t mode);
+int security_path_chown(struct path *path, uid_t uid, gid_t gid);
+int security_path_chroot(struct path *path);
+#else	/* CONFIG_SECURITY_PATH */
+static inline int security_path_unlink(struct path *dir, struct dentry *dentry)
+{
+	return 0;
+}
+
+static inline int security_path_mkdir(struct path *dir, struct dentry *dentry,
+				      umode_t mode)
+{
+	return 0;
+}
+
+static inline int security_path_rmdir(struct path *dir, struct dentry *dentry)
+{
+	return 0;
+}
+
+static inline int security_path_mknod(struct path *dir, struct dentry *dentry,
+				      umode_t mode, unsigned int dev)
+{
+	return 0;
+}
+
+static inline int security_path_truncate(struct path *path)
+{
+	return 0;
+}
+
+static inline int security_path_symlink(struct path *dir, struct dentry *dentry,
+					const char *old_name)
+{
+	return 0;
+}
+
+static inline int security_path_link(struct dentry *old_dentry,
+				     struct path *new_dir,
+				     struct dentry *new_dentry)
+{
+	return 0;
+}
+
+static inline int security_path_rename(struct path *old_dir,
+				       struct dentry *old_dentry,
+				       struct path *new_dir,
+				       struct dentry *new_dentry)
+{
+	return 0;
+}
+
+static inline int security_path_chmod(struct path *path, umode_t mode)
+{
+	return 0;
+}
+
+static inline int security_path_chown(struct path *path, uid_t uid, gid_t gid)
+{
+	return 0;
+}
+
+static inline int security_path_chroot(struct path *path)
+{
+	return 0;
+}
+#endif	/* CONFIG_SECURITY_PATH */
+
+#ifdef CONFIG_KEYS
+#ifdef CONFIG_SECURITY
+
+int security_key_alloc(struct key *key, const struct cred *cred, unsigned long flags);
+void security_key_free(struct key *key);
+int security_key_permission(key_ref_t key_ref,
+			    const struct cred *cred, key_perm_t perm);
+int security_key_getsecurity(struct key *key, char **_buffer);
+
+#else
+
+static inline int security_key_alloc(struct key *key,
+				     const struct cred *cred,
+				     unsigned long flags)
+{
+	return 0;
+}
+
+static inline void security_key_free(struct key *key)
+{
+}
+
+static inline int security_key_permission(key_ref_t key_ref,
+					  const struct cred *cred,
+					  key_perm_t perm)
+{
+	return 0;
+}
+
+static inline int security_key_getsecurity(struct key *key, char **_buffer)
+{
+	*_buffer = NULL;
+	return 0;
+}
+
+#endif
+#endif /* CONFIG_KEYS */
+
+#ifdef CONFIG_AUDIT
+#ifdef CONFIG_SECURITY
+int security_audit_rule_init(u32 field, u32 op, char *rulestr, void **lsmrule);
+int security_audit_rule_known(struct audit_krule *krule);
+int security_audit_rule_match(u32 secid, u32 field, u32 op, void *lsmrule,
+			      struct audit_context *actx);
+void security_audit_rule_free(void *lsmrule);
+
+#else
+
+static inline int security_audit_rule_init(u32 field, u32 op, char *rulestr,
+					   void **lsmrule)
+{
+	return 0;
+}
+
+static inline int security_audit_rule_known(struct audit_krule *krule)
+{
+	return 0;
+}
+
+static inline int security_audit_rule_match(u32 secid, u32 field, u32 op,
+				   void *lsmrule, struct audit_context *actx)
+{
+	return 0;
+}
+
+static inline void security_audit_rule_free(void *lsmrule)
+{ }
+
+#endif /* CONFIG_SECURITY */
+#endif /* CONFIG_AUDIT */
+
+#ifdef CONFIG_SECURITYFS
+
+extern struct dentry *securityfs_create_file(const char *name, umode_t mode,
+					     struct dentry *parent, void *data,
+					     const struct file_operations *fops);
+extern struct dentry *securityfs_create_dir(const char *name, struct dentry *parent);
+extern void securityfs_remove(struct dentry *dentry);
+
+#else /* CONFIG_SECURITYFS */
+
+static inline struct dentry *securityfs_create_dir(const char *name,
+						   struct dentry *parent)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline struct dentry *securityfs_create_file(const char *name,
+						    umode_t mode,
+						    struct dentry *parent,
+						    void *data,
+						    const struct file_operations *fops)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline void securityfs_remove(struct dentry *dentry)
+{}
+
+#endif
+
+#ifdef CONFIG_SECURITY
+
+static inline char *alloc_secdata(void)
+{
+	return (char *)get_zeroed_page(GFP_KERNEL);
+}
+
+static inline void free_secdata(void *secdata)
+{
+	free_page((unsigned long)secdata);
+}
+
+#else
+
+static inline char *alloc_secdata(void)
+{
+        return (char *)1;
+}
+
+static inline void free_secdata(void *secdata)
+{ }
+#endif /* CONFIG_SECURITY */
+
+#endif /* ! __LINUX_SECURITY_H */
+
diff --git a/include/linux/selection.h b/include/linux/selection.h
new file mode 100644
index 00000000..85193aa8
--- /dev/null
+++ b/include/linux/selection.h
@@ -0,0 +1,44 @@
+/*
+ * selection.h
+ *
+ * Interface between console.c, tty_io.c, vt.c, vc_screen.c and selection.c
+ */
+
+#ifndef _LINUX_SELECTION_H_
+#define _LINUX_SELECTION_H_
+
+#include <linux/tiocl.h>
+#include <linux/vt_buffer.h>
+
+struct tty_struct;
+
+extern struct vc_data *sel_cons;
+struct tty_struct;
+
+extern void clear_selection(void);
+extern int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *tty);
+extern int paste_selection(struct tty_struct *tty);
+extern int sel_loadlut(char __user *p);
+extern int mouse_reporting(void);
+extern void mouse_report(struct tty_struct * tty, int butt, int mrx, int mry);
+
+extern int console_blanked;
+
+extern unsigned char color_table[];
+extern int default_red[];
+extern int default_grn[];
+extern int default_blu[];
+
+extern unsigned short *screen_pos(struct vc_data *vc, int w_offset, int viewed);
+extern u16 screen_glyph(struct vc_data *vc, int offset);
+extern void complement_pos(struct vc_data *vc, int offset);
+extern void invert_screen(struct vc_data *vc, int offset, int count, int shift);
+
+extern void getconsxy(struct vc_data *vc, unsigned char *p);
+extern void putconsxy(struct vc_data *vc, unsigned char *p);
+
+extern u16 vcs_scr_readw(struct vc_data *vc, const u16 *org);
+extern void vcs_scr_writew(struct vc_data *vc, u16 val, u16 *org);
+extern void vcs_scr_updated(struct vc_data *vc);
+
+#endif
diff --git a/include/linux/selinux.h b/include/linux/selinux.h
new file mode 100644
index 00000000..44f45961
--- /dev/null
+++ b/include/linux/selinux.h
@@ -0,0 +1,35 @@
+/*
+ * SELinux services exported to the rest of the kernel.
+ *
+ * Author: James Morris <jmorris@redhat.com>
+ *
+ * Copyright (C) 2005 Red Hat, Inc., James Morris <jmorris@redhat.com>
+ * Copyright (C) 2006 Trusted Computer Solutions, Inc. <dgoeddel@trustedcs.com>
+ * Copyright (C) 2006 IBM Corporation, Timothy R. Chavez <tinytim@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2,
+ * as published by the Free Software Foundation.
+ */
+#ifndef _LINUX_SELINUX_H
+#define _LINUX_SELINUX_H
+
+struct selinux_audit_rule;
+struct audit_context;
+struct kern_ipc_perm;
+
+#ifdef CONFIG_SECURITY_SELINUX
+
+/**
+ * selinux_is_enabled - is SELinux enabled?
+ */
+bool selinux_is_enabled(void);
+#else
+
+static inline bool selinux_is_enabled(void)
+{
+	return false;
+}
+#endif	/* CONFIG_SECURITY_SELINUX */
+
+#endif /* _LINUX_SELINUX_H */
diff --git a/include/linux/selinux_netlink.h b/include/linux/selinux_netlink.h
new file mode 100644
index 00000000..d2397977
--- /dev/null
+++ b/include/linux/selinux_netlink.h
@@ -0,0 +1,50 @@
+/*
+ * Netlink event notifications for SELinux.
+ *
+ * Author: James Morris <jmorris@redhat.com>
+ *
+ * Copyright (C) 2004 Red Hat, Inc., James Morris <jmorris@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2,
+ * as published by the Free Software Foundation.
+ */
+#ifndef _LINUX_SELINUX_NETLINK_H
+#define _LINUX_SELINUX_NETLINK_H
+
+#include <linux/types.h>
+
+/* Message types. */
+#define SELNL_MSG_BASE 0x10
+enum {
+	SELNL_MSG_SETENFORCE = SELNL_MSG_BASE,
+	SELNL_MSG_POLICYLOAD,
+	SELNL_MSG_MAX
+};
+
+#ifndef __KERNEL__
+/* Multicast groups - backwards compatiblility for userspace */
+#define SELNL_GRP_NONE		0x00000000
+#define SELNL_GRP_AVC		0x00000001	/* AVC notifications */
+#define SELNL_GRP_ALL		0xffffffff
+#endif
+
+enum selinux_nlgroups {
+	SELNLGRP_NONE,
+#define SELNLGRP_NONE	SELNLGRP_NONE
+	SELNLGRP_AVC,
+#define SELNLGRP_AVC	SELNLGRP_AVC
+	__SELNLGRP_MAX
+};
+#define SELNLGRP_MAX	(__SELNLGRP_MAX - 1)
+
+/* Message structures */
+struct selnl_msg_setenforce {
+	__s32		val;
+};
+
+struct selnl_msg_policyload {
+	__u32	seqno;
+};
+
+#endif /* _LINUX_SELINUX_NETLINK_H */
diff --git a/include/linux/sem.h b/include/linux/sem.h
new file mode 100644
index 00000000..10d6b226
--- /dev/null
+++ b/include/linux/sem.h
@@ -0,0 +1,127 @@
+#ifndef _LINUX_SEM_H
+#define _LINUX_SEM_H
+
+#include <linux/ipc.h>
+
+/* semop flags */
+#define SEM_UNDO        0x1000  /* undo the operation on exit */
+
+/* semctl Command Definitions. */
+#define GETPID  11       /* get sempid */
+#define GETVAL  12       /* get semval */
+#define GETALL  13       /* get all semval's */
+#define GETNCNT 14       /* get semncnt */
+#define GETZCNT 15       /* get semzcnt */
+#define SETVAL  16       /* set semval */
+#define SETALL  17       /* set all semval's */
+
+/* ipcs ctl cmds */
+#define SEM_STAT 18
+#define SEM_INFO 19
+
+/* Obsolete, used only for backwards compatibility and libc5 compiles */
+struct semid_ds {
+	struct ipc_perm	sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	__kernel_time_t	sem_ctime;		/* last change time */
+	struct sem	*sem_base;		/* ptr to first semaphore in array */
+	struct sem_queue *sem_pending;		/* pending operations to be processed */
+	struct sem_queue **sem_pending_last;	/* last pending operation */
+	struct sem_undo	*undo;			/* undo requests on this array */
+	unsigned short	sem_nsems;		/* no. of semaphores in array */
+};
+
+/* Include the definition of semid64_ds */
+#include <asm/sembuf.h>
+
+/* semop system calls takes an array of these. */
+struct sembuf {
+	unsigned short  sem_num;	/* semaphore index in array */
+	short		sem_op;		/* semaphore operation */
+	short		sem_flg;	/* operation flags */
+};
+
+/* arg for semctl system calls. */
+union semun {
+	int val;			/* value for SETVAL */
+	struct semid_ds __user *buf;	/* buffer for IPC_STAT & IPC_SET */
+	unsigned short __user *array;	/* array for GETALL & SETALL */
+	struct seminfo __user *__buf;	/* buffer for IPC_INFO */
+	void __user *__pad;
+};
+
+struct  seminfo {
+	int semmap;
+	int semmni;
+	int semmns;
+	int semmnu;
+	int semmsl;
+	int semopm;
+	int semume;
+	int semusz;
+	int semvmx;
+	int semaem;
+};
+
+#define SEMMNI  128             /* <= IPCMNI  max # of semaphore identifiers */
+#define SEMMSL  250             /* <= 8 000 max num of semaphores per id */
+#define SEMMNS  (SEMMNI*SEMMSL) /* <= INT_MAX max # of semaphores in system */
+#define SEMOPM  32	        /* <= 1 000 max num of ops per semop call */
+#define SEMVMX  32767           /* <= 32767 semaphore maximum value */
+#define SEMAEM  SEMVMX          /* adjust on exit max value */
+
+/* unused */
+#define SEMUME  SEMOPM          /* max num of undo entries per process */
+#define SEMMNU  SEMMNS          /* num of undo structures system wide */
+#define SEMMAP  SEMMNS          /* # of entries in semaphore map */
+#define SEMUSZ  20		/* sizeof struct sem_undo */
+
+#ifdef __KERNEL__
+#include <linux/atomic.h>
+#include <linux/rcupdate.h>
+#include <linux/cache.h>
+
+struct task_struct;
+
+/* One sem_array data structure for each set of semaphores in the system. */
+struct sem_array {
+	struct kern_ipc_perm	____cacheline_aligned_in_smp
+				sem_perm;	/* permissions .. see ipc.h */
+	time_t			sem_otime;	/* last semop time */
+	time_t			sem_ctime;	/* last change time */
+	struct sem		*sem_base;	/* ptr to first semaphore in array */
+	struct list_head	sem_pending;	/* pending operations to be processed */
+	struct list_head	list_id;	/* undo requests on this array */
+	int			sem_nsems;	/* no. of semaphores in array */
+	int			complex_count;	/* pending complex operations */
+};
+
+#ifdef CONFIG_SYSVIPC
+
+struct sysv_sem {
+	struct sem_undo_list *undo_list;
+};
+
+extern int copy_semundo(unsigned long clone_flags, struct task_struct *tsk);
+extern void exit_sem(struct task_struct *tsk);
+
+#else
+
+struct sysv_sem {
+	/* empty */
+};
+
+static inline int copy_semundo(unsigned long clone_flags, struct task_struct *tsk)
+{
+	return 0;
+}
+
+static inline void exit_sem(struct task_struct *tsk)
+{
+	return;
+}
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_SEM_H */
diff --git a/include/linux/semaphore.h b/include/linux/semaphore.h
new file mode 100644
index 00000000..dc368b8c
--- /dev/null
+++ b/include/linux/semaphore.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (c) 2008 Intel Corporation
+ * Author: Matthew Wilcox <willy@linux.intel.com>
+ *
+ * Distributed under the terms of the GNU GPL, version 2
+ *
+ * Please see kernel/semaphore.c for documentation of these functions
+ */
+#ifndef __LINUX_SEMAPHORE_H
+#define __LINUX_SEMAPHORE_H
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+/* Please don't access any members of this structure directly */
+struct semaphore {
+	raw_spinlock_t		lock;
+	unsigned int		count;
+	struct list_head	wait_list;
+};
+
+#define __SEMAPHORE_INITIALIZER(name, n)				\
+{									\
+	.lock		= __RAW_SPIN_LOCK_UNLOCKED((name).lock),	\
+	.count		= n,						\
+	.wait_list	= LIST_HEAD_INIT((name).wait_list),		\
+}
+
+#define DEFINE_SEMAPHORE(name)	\
+	struct semaphore name = __SEMAPHORE_INITIALIZER(name, 1)
+
+static inline void sema_init(struct semaphore *sem, int val)
+{
+	static struct lock_class_key __key;
+	*sem = (struct semaphore) __SEMAPHORE_INITIALIZER(*sem, val);
+	lockdep_init_map(&sem->lock.dep_map, "semaphore->lock", &__key, 0);
+}
+
+extern void down(struct semaphore *sem);
+extern int __must_check down_interruptible(struct semaphore *sem);
+extern int __must_check down_killable(struct semaphore *sem);
+extern int __must_check down_trylock(struct semaphore *sem);
+extern int __must_check down_timeout(struct semaphore *sem, long jiffies);
+extern void up(struct semaphore *sem);
+
+#endif /* __LINUX_SEMAPHORE_H */
diff --git a/include/linux/seq_file.h b/include/linux/seq_file.h
new file mode 100644
index 00000000..fc61854f
--- /dev/null
+++ b/include/linux/seq_file.h
@@ -0,0 +1,160 @@
+#ifndef _LINUX_SEQ_FILE_H
+#define _LINUX_SEQ_FILE_H
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/bug.h>
+#include <linux/mutex.h>
+#include <linux/cpumask.h>
+#include <linux/nodemask.h>
+
+struct seq_operations;
+struct file;
+struct path;
+struct inode;
+struct dentry;
+
+struct seq_file {
+	char *buf;
+	size_t size;
+	size_t from;
+	size_t count;
+	loff_t index;
+	loff_t read_pos;
+	u64 version;
+	struct mutex lock;
+	const struct seq_operations *op;
+	int poll_event;
+	void *private;
+};
+
+struct seq_operations {
+	void * (*start) (struct seq_file *m, loff_t *pos);
+	void (*stop) (struct seq_file *m, void *v);
+	void * (*next) (struct seq_file *m, void *v, loff_t *pos);
+	int (*show) (struct seq_file *m, void *v);
+};
+
+#define SEQ_SKIP 1
+
+/**
+ * seq_get_buf - get buffer to write arbitrary data to
+ * @m: the seq_file handle
+ * @bufp: the beginning of the buffer is stored here
+ *
+ * Return the number of bytes available in the buffer, or zero if
+ * there's no space.
+ */
+static inline size_t seq_get_buf(struct seq_file *m, char **bufp)
+{
+	BUG_ON(m->count > m->size);
+	if (m->count < m->size)
+		*bufp = m->buf + m->count;
+	else
+		*bufp = NULL;
+
+	return m->size - m->count;
+}
+
+/**
+ * seq_commit - commit data to the buffer
+ * @m: the seq_file handle
+ * @num: the number of bytes to commit
+ *
+ * Commit @num bytes of data written to a buffer previously acquired
+ * by seq_buf_get.  To signal an error condition, or that the data
+ * didn't fit in the available space, pass a negative @num value.
+ */
+static inline void seq_commit(struct seq_file *m, int num)
+{
+	if (num < 0) {
+		m->count = m->size;
+	} else {
+		BUG_ON(m->count + num > m->size);
+		m->count += num;
+	}
+}
+
+char *mangle_path(char *s, const char *p, const char *esc);
+int seq_open(struct file *, const struct seq_operations *);
+ssize_t seq_read(struct file *, char __user *, size_t, loff_t *);
+loff_t seq_lseek(struct file *, loff_t, int);
+int seq_release(struct inode *, struct file *);
+int seq_escape(struct seq_file *, const char *, const char *);
+int seq_putc(struct seq_file *m, char c);
+int seq_puts(struct seq_file *m, const char *s);
+int seq_write(struct seq_file *seq, const void *data, size_t len);
+
+__printf(2, 3) int seq_printf(struct seq_file *, const char *, ...);
+
+int seq_path(struct seq_file *, const struct path *, const char *);
+int seq_dentry(struct seq_file *, struct dentry *, const char *);
+int seq_path_root(struct seq_file *m, const struct path *path,
+		  const struct path *root, const char *esc);
+int seq_bitmap(struct seq_file *m, const unsigned long *bits,
+				   unsigned int nr_bits);
+static inline int seq_cpumask(struct seq_file *m, const struct cpumask *mask)
+{
+	return seq_bitmap(m, cpumask_bits(mask), nr_cpu_ids);
+}
+
+static inline int seq_nodemask(struct seq_file *m, nodemask_t *mask)
+{
+	return seq_bitmap(m, mask->bits, MAX_NUMNODES);
+}
+
+int seq_bitmap_list(struct seq_file *m, const unsigned long *bits,
+		unsigned int nr_bits);
+
+static inline int seq_cpumask_list(struct seq_file *m,
+				   const struct cpumask *mask)
+{
+	return seq_bitmap_list(m, cpumask_bits(mask), nr_cpu_ids);
+}
+
+static inline int seq_nodemask_list(struct seq_file *m, nodemask_t *mask)
+{
+	return seq_bitmap_list(m, mask->bits, MAX_NUMNODES);
+}
+
+int single_open(struct file *, int (*)(struct seq_file *, void *), void *);
+int single_release(struct inode *, struct file *);
+void *__seq_open_private(struct file *, const struct seq_operations *, int);
+int seq_open_private(struct file *, const struct seq_operations *, int);
+int seq_release_private(struct inode *, struct file *);
+int seq_put_decimal_ull(struct seq_file *m, char delimiter,
+			unsigned long long num);
+int seq_put_decimal_ll(struct seq_file *m, char delimiter,
+			long long num);
+
+#define SEQ_START_TOKEN ((void *)1)
+/*
+ * Helpers for iteration over list_head-s in seq_files
+ */
+
+extern struct list_head *seq_list_start(struct list_head *head,
+		loff_t pos);
+extern struct list_head *seq_list_start_head(struct list_head *head,
+		loff_t pos);
+extern struct list_head *seq_list_next(void *v, struct list_head *head,
+		loff_t *ppos);
+
+/*
+ * Helpers for iteration over hlist_head-s in seq_files
+ */
+
+extern struct hlist_node *seq_hlist_start(struct hlist_head *head,
+					  loff_t pos);
+extern struct hlist_node *seq_hlist_start_head(struct hlist_head *head,
+					       loff_t pos);
+extern struct hlist_node *seq_hlist_next(void *v, struct hlist_head *head,
+					 loff_t *ppos);
+
+extern struct hlist_node *seq_hlist_start_rcu(struct hlist_head *head,
+					      loff_t pos);
+extern struct hlist_node *seq_hlist_start_head_rcu(struct hlist_head *head,
+						   loff_t pos);
+extern struct hlist_node *seq_hlist_next_rcu(void *v,
+						   struct hlist_head *head,
+						   loff_t *ppos);
+#endif
diff --git a/include/linux/seq_file_net.h b/include/linux/seq_file_net.h
new file mode 100644
index 00000000..32c89bbe
--- /dev/null
+++ b/include/linux/seq_file_net.h
@@ -0,0 +1,30 @@
+#ifndef __SEQ_FILE_NET_H__
+#define __SEQ_FILE_NET_H__
+
+#include <linux/seq_file.h>
+
+struct net;
+extern struct net init_net;
+
+struct seq_net_private {
+#ifdef CONFIG_NET_NS
+	struct net *net;
+#endif
+};
+
+int seq_open_net(struct inode *, struct file *,
+		 const struct seq_operations *, int);
+int single_open_net(struct inode *, struct file *file,
+		int (*show)(struct seq_file *, void *));
+int seq_release_net(struct inode *, struct file *);
+int single_release_net(struct inode *, struct file *);
+static inline struct net *seq_file_net(struct seq_file *seq)
+{
+#ifdef CONFIG_NET_NS
+	return ((struct seq_net_private *)seq->private)->net;
+#else
+	return &init_net;
+#endif
+}
+
+#endif
diff --git a/include/linux/seqlock.h b/include/linux/seqlock.h
new file mode 100644
index 00000000..600060e2
--- /dev/null
+++ b/include/linux/seqlock.h
@@ -0,0 +1,282 @@
+#ifndef __LINUX_SEQLOCK_H
+#define __LINUX_SEQLOCK_H
+/*
+ * Reader/writer consistent mechanism without starving writers. This type of
+ * lock for data where the reader wants a consistent set of information
+ * and is willing to retry if the information changes.  Readers never
+ * block but they may have to retry if a writer is in
+ * progress. Writers do not wait for readers. 
+ *
+ * This is not as cache friendly as brlock. Also, this will not work
+ * for data that contains pointers, because any writer could
+ * invalidate a pointer that a reader was following.
+ *
+ * Expected reader usage:
+ * 	do {
+ *	    seq = read_seqbegin(&foo);
+ * 	...
+ *      } while (read_seqretry(&foo, seq));
+ *
+ *
+ * On non-SMP the spin locks disappear but the writer still needs
+ * to increment the sequence variables because an interrupt routine could
+ * change the state of the data.
+ *
+ * Based on x86_64 vsyscall gettimeofday 
+ * by Keith Owens and Andrea Arcangeli
+ */
+
+#include <linux/spinlock.h>
+#include <linux/preempt.h>
+#include <asm/processor.h>
+
+typedef struct {
+	unsigned sequence;
+	spinlock_t lock;
+} seqlock_t;
+
+/*
+ * These macros triggered gcc-3.x compile-time problems.  We think these are
+ * OK now.  Be cautious.
+ */
+#define __SEQLOCK_UNLOCKED(lockname) \
+		 { 0, __SPIN_LOCK_UNLOCKED(lockname) }
+
+#define seqlock_init(x)					\
+	do {						\
+		(x)->sequence = 0;			\
+		spin_lock_init(&(x)->lock);		\
+	} while (0)
+
+#define DEFINE_SEQLOCK(x) \
+		seqlock_t x = __SEQLOCK_UNLOCKED(x)
+
+/* Lock out other writers and update the count.
+ * Acts like a normal spin_lock/unlock.
+ * Don't need preempt_disable() because that is in the spin_lock already.
+ */
+static inline void write_seqlock(seqlock_t *sl)
+{
+	spin_lock(&sl->lock);
+	++sl->sequence;
+	smp_wmb();
+}
+
+static inline void write_sequnlock(seqlock_t *sl)
+{
+	smp_wmb();
+	sl->sequence++;
+	spin_unlock(&sl->lock);
+}
+
+static inline int write_tryseqlock(seqlock_t *sl)
+{
+	int ret = spin_trylock(&sl->lock);
+
+	if (ret) {
+		++sl->sequence;
+		smp_wmb();
+	}
+	return ret;
+}
+
+/* Start of read calculation -- fetch last complete writer token */
+static __always_inline unsigned read_seqbegin(const seqlock_t *sl)
+{
+	unsigned ret;
+
+repeat:
+	ret = ACCESS_ONCE(sl->sequence);
+	if (unlikely(ret & 1)) {
+		cpu_relax();
+		goto repeat;
+	}
+	smp_rmb();
+
+	return ret;
+}
+
+/*
+ * Test if reader processed invalid data.
+ *
+ * If sequence value changed then writer changed data while in section.
+ */
+static __always_inline int read_seqretry(const seqlock_t *sl, unsigned start)
+{
+	smp_rmb();
+
+	return unlikely(sl->sequence != start);
+}
+
+
+/*
+ * Version using sequence counter only.
+ * This can be used when code has its own mutex protecting the
+ * updating starting before the write_seqcountbeqin() and ending
+ * after the write_seqcount_end().
+ */
+
+typedef struct seqcount {
+	unsigned sequence;
+} seqcount_t;
+
+#define SEQCNT_ZERO { 0 }
+#define seqcount_init(x)	do { *(x) = (seqcount_t) SEQCNT_ZERO; } while (0)
+
+/**
+ * __read_seqcount_begin - begin a seq-read critical section (without barrier)
+ * @s: pointer to seqcount_t
+ * Returns: count to be passed to read_seqcount_retry
+ *
+ * __read_seqcount_begin is like read_seqcount_begin, but has no smp_rmb()
+ * barrier. Callers should ensure that smp_rmb() or equivalent ordering is
+ * provided before actually loading any of the variables that are to be
+ * protected in this critical section.
+ *
+ * Use carefully, only in critical code, and comment how the barrier is
+ * provided.
+ */
+static inline unsigned __read_seqcount_begin(const seqcount_t *s)
+{
+	unsigned ret;
+
+repeat:
+	ret = ACCESS_ONCE(s->sequence);
+	if (unlikely(ret & 1)) {
+		cpu_relax();
+		goto repeat;
+	}
+	return ret;
+}
+
+/**
+ * read_seqcount_begin - begin a seq-read critical section
+ * @s: pointer to seqcount_t
+ * Returns: count to be passed to read_seqcount_retry
+ *
+ * read_seqcount_begin opens a read critical section of the given seqcount.
+ * Validity of the critical section is tested by checking read_seqcount_retry
+ * function.
+ */
+static inline unsigned read_seqcount_begin(const seqcount_t *s)
+{
+	unsigned ret = __read_seqcount_begin(s);
+	smp_rmb();
+	return ret;
+}
+
+/**
+ * raw_seqcount_begin - begin a seq-read critical section
+ * @s: pointer to seqcount_t
+ * Returns: count to be passed to read_seqcount_retry
+ *
+ * raw_seqcount_begin opens a read critical section of the given seqcount.
+ * Validity of the critical section is tested by checking read_seqcount_retry
+ * function.
+ *
+ * Unlike read_seqcount_begin(), this function will not wait for the count
+ * to stabilize. If a writer is active when we begin, we will fail the
+ * read_seqcount_retry() instead of stabilizing at the beginning of the
+ * critical section.
+ */
+static inline unsigned raw_seqcount_begin(const seqcount_t *s)
+{
+	unsigned ret = ACCESS_ONCE(s->sequence);
+	smp_rmb();
+	return ret & ~1;
+}
+
+/**
+ * __read_seqcount_retry - end a seq-read critical section (without barrier)
+ * @s: pointer to seqcount_t
+ * @start: count, from read_seqcount_begin
+ * Returns: 1 if retry is required, else 0
+ *
+ * __read_seqcount_retry is like read_seqcount_retry, but has no smp_rmb()
+ * barrier. Callers should ensure that smp_rmb() or equivalent ordering is
+ * provided before actually loading any of the variables that are to be
+ * protected in this critical section.
+ *
+ * Use carefully, only in critical code, and comment how the barrier is
+ * provided.
+ */
+static inline int __read_seqcount_retry(const seqcount_t *s, unsigned start)
+{
+	return unlikely(s->sequence != start);
+}
+
+/**
+ * read_seqcount_retry - end a seq-read critical section
+ * @s: pointer to seqcount_t
+ * @start: count, from read_seqcount_begin
+ * Returns: 1 if retry is required, else 0
+ *
+ * read_seqcount_retry closes a read critical section of the given seqcount.
+ * If the critical section was invalid, it must be ignored (and typically
+ * retried).
+ */
+static inline int read_seqcount_retry(const seqcount_t *s, unsigned start)
+{
+	smp_rmb();
+
+	return __read_seqcount_retry(s, start);
+}
+
+
+/*
+ * Sequence counter only version assumes that callers are using their
+ * own mutexing.
+ */
+static inline void write_seqcount_begin(seqcount_t *s)
+{
+	s->sequence++;
+	smp_wmb();
+}
+
+static inline void write_seqcount_end(seqcount_t *s)
+{
+	smp_wmb();
+	s->sequence++;
+}
+
+/**
+ * write_seqcount_barrier - invalidate in-progress read-side seq operations
+ * @s: pointer to seqcount_t
+ *
+ * After write_seqcount_barrier, no read-side seq operations will complete
+ * successfully and see data older than this.
+ */
+static inline void write_seqcount_barrier(seqcount_t *s)
+{
+	smp_wmb();
+	s->sequence+=2;
+}
+
+/*
+ * Possible sw/hw IRQ protected versions of the interfaces.
+ */
+#define write_seqlock_irqsave(lock, flags)				\
+	do { local_irq_save(flags); write_seqlock(lock); } while (0)
+#define write_seqlock_irq(lock)						\
+	do { local_irq_disable();   write_seqlock(lock); } while (0)
+#define write_seqlock_bh(lock)						\
+        do { local_bh_disable();    write_seqlock(lock); } while (0)
+
+#define write_sequnlock_irqrestore(lock, flags)				\
+	do { write_sequnlock(lock); local_irq_restore(flags); } while(0)
+#define write_sequnlock_irq(lock)					\
+	do { write_sequnlock(lock); local_irq_enable(); } while(0)
+#define write_sequnlock_bh(lock)					\
+	do { write_sequnlock(lock); local_bh_enable(); } while(0)
+
+#define read_seqbegin_irqsave(lock, flags)				\
+	({ local_irq_save(flags);   read_seqbegin(lock); })
+
+#define read_seqretry_irqrestore(lock, iv, flags)			\
+	({								\
+		int ret = read_seqretry(lock, iv);			\
+		local_irq_restore(flags);				\
+		ret;							\
+	})
+
+#endif /* __LINUX_SEQLOCK_H */
diff --git a/include/linux/serial.h b/include/linux/serial.h
new file mode 100644
index 00000000..441980ec
--- /dev/null
+++ b/include/linux/serial.h
@@ -0,0 +1,227 @@
+/*
+ * include/linux/serial.h
+ *
+ * Copyright (C) 1992 by Theodore Ts'o.
+ * 
+ * Redistribution of this file is permitted under the terms of the GNU 
+ * Public License (GPL)
+ */
+
+#ifndef _LINUX_SERIAL_H
+#define _LINUX_SERIAL_H
+
+#include <linux/types.h>
+
+#ifdef __KERNEL__
+#include <asm/page.h>
+
+/*
+ * Counters of the input lines (CTS, DSR, RI, CD) interrupts
+ */
+
+struct async_icount {
+	__u32	cts, dsr, rng, dcd, tx, rx;
+	__u32	frame, parity, overrun, brk;
+	__u32	buf_overrun;
+};
+
+/*
+ * The size of the serial xmit buffer is 1 page, or 4096 bytes
+ */
+#define SERIAL_XMIT_SIZE PAGE_SIZE
+
+#endif
+
+struct serial_struct {
+	int	type;
+	int	line;
+	unsigned int	port;
+	int	irq;
+	int	flags;
+	int	xmit_fifo_size;
+	int	custom_divisor;
+	int	baud_base;
+	unsigned short	close_delay;
+	char	io_type;
+	char	reserved_char[1];
+	int	hub6;
+	unsigned short	closing_wait; /* time to wait before closing */
+	unsigned short	closing_wait2; /* no longer used... */
+	unsigned char	*iomem_base;
+	unsigned short	iomem_reg_shift;
+	unsigned int	port_high;
+	unsigned long	iomap_base;	/* cookie passed into ioremap */
+};
+
+/*
+ * For the close wait times, 0 means wait forever for serial port to
+ * flush its output.  65535 means don't wait at all.
+ */
+#define ASYNC_CLOSING_WAIT_INF	0
+#define ASYNC_CLOSING_WAIT_NONE	65535
+
+/*
+ * These are the supported serial types.
+ */
+#define PORT_UNKNOWN	0
+#define PORT_8250	1
+#define PORT_16450	2
+#define PORT_16550	3
+#define PORT_16550A	4
+#define PORT_CIRRUS     5	/* usurped by cyclades.c */
+#define PORT_16650	6
+#define PORT_16650V2	7
+#define PORT_16750	8
+#define PORT_STARTECH	9	/* usurped by cyclades.c */
+#define PORT_16C950	10	/* Oxford Semiconductor */
+#define PORT_16654	11
+#define PORT_16850	12
+#define PORT_RSA	13	/* RSA-DV II/S card */
+#define PORT_MAX	13
+
+#define SERIAL_IO_PORT	0
+#define SERIAL_IO_HUB6	1
+#define SERIAL_IO_MEM	2
+
+struct serial_uart_config {
+	char	*name;
+	int	dfl_xmit_fifo_size;
+	int	flags;
+};
+
+#define UART_CLEAR_FIFO		0x01
+#define UART_USE_FIFO		0x02
+#define UART_STARTECH		0x04
+#define UART_NATSEMI		0x08
+
+/*
+ * Definitions for async_struct (and serial_struct) flags field
+ *
+ * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
+ */
+#define ASYNCB_HUP_NOTIFY	 0 /* Notify getty on hangups and closes
+				    * on the callout port */
+#define ASYNCB_FOURPORT		 1 /* Set OU1, OUT2 per AST Fourport settings */
+#define ASYNCB_SAK		 2 /* Secure Attention Key (Orange book) */
+#define ASYNCB_SPLIT_TERMIOS	 3 /* Separate termios for dialin/callout */
+#define ASYNCB_SPD_HI		 4 /* Use 56000 instead of 38400 bps */
+#define ASYNCB_SPD_VHI		 5 /* Use 115200 instead of 38400 bps */
+#define ASYNCB_SKIP_TEST	 6 /* Skip UART test during autoconfiguration */
+#define ASYNCB_AUTO_IRQ		 7 /* Do automatic IRQ during
+				    * autoconfiguration */
+#define ASYNCB_SESSION_LOCKOUT	 8 /* Lock out cua opens based on session */
+#define ASYNCB_PGRP_LOCKOUT	 9 /* Lock out cua opens based on pgrp */
+#define ASYNCB_CALLOUT_NOHUP	10 /* Don't do hangups for cua device */
+#define ASYNCB_HARDPPS_CD	11 /* Call hardpps when CD goes high  */
+#define ASYNCB_SPD_SHI		12 /* Use 230400 instead of 38400 bps */
+#define ASYNCB_LOW_LATENCY	13 /* Request low latency behaviour */
+#define ASYNCB_BUGGY_UART	14 /* This is a buggy UART, skip some safety
+				    * checks.  Note: can be dangerous! */
+#define ASYNCB_AUTOPROBE	15 /* Port was autoprobed by PCI or PNP code */
+#define ASYNCB_LAST_USER	15
+
+/* Internal flags used only by kernel */
+#define ASYNCB_INITIALIZED	31 /* Serial port was initialized */
+#define ASYNCB_SUSPENDED	30 /* Serial port is suspended */
+#define ASYNCB_NORMAL_ACTIVE	29 /* Normal device is active */
+#define ASYNCB_BOOT_AUTOCONF	28 /* Autoconfigure port on bootup */
+#define ASYNCB_CLOSING		27 /* Serial port is closing */
+#define ASYNCB_CTS_FLOW		26 /* Do CTS flow control */
+#define ASYNCB_CHECK_CD		25 /* i.e., CLOCAL */
+#define ASYNCB_SHARE_IRQ	24 /* for multifunction cards, no longer used */
+#define ASYNCB_CONS_FLOW	23 /* flow control for console  */
+#define ASYNCB_BOOT_ONLYMCA	22 /* Probe only if MCA bus */
+#define ASYNCB_FIRST_KERNEL	22
+
+#define ASYNC_HUP_NOTIFY	(1U << ASYNCB_HUP_NOTIFY)
+#define ASYNC_SUSPENDED		(1U << ASYNCB_SUSPENDED)
+#define ASYNC_FOURPORT		(1U << ASYNCB_FOURPORT)
+#define ASYNC_SAK		(1U << ASYNCB_SAK)
+#define ASYNC_SPLIT_TERMIOS	(1U << ASYNCB_SPLIT_TERMIOS)
+#define ASYNC_SPD_HI		(1U << ASYNCB_SPD_HI)
+#define ASYNC_SPD_VHI		(1U << ASYNCB_SPD_VHI)
+#define ASYNC_SKIP_TEST		(1U << ASYNCB_SKIP_TEST)
+#define ASYNC_AUTO_IRQ		(1U << ASYNCB_AUTO_IRQ)
+#define ASYNC_SESSION_LOCKOUT	(1U << ASYNCB_SESSION_LOCKOUT)
+#define ASYNC_PGRP_LOCKOUT	(1U << ASYNCB_PGRP_LOCKOUT)
+#define ASYNC_CALLOUT_NOHUP	(1U << ASYNCB_CALLOUT_NOHUP)
+#define ASYNC_HARDPPS_CD	(1U << ASYNCB_HARDPPS_CD)
+#define ASYNC_SPD_SHI		(1U << ASYNCB_SPD_SHI)
+#define ASYNC_LOW_LATENCY	(1U << ASYNCB_LOW_LATENCY)
+#define ASYNC_BUGGY_UART	(1U << ASYNCB_BUGGY_UART)
+#define ASYNC_AUTOPROBE		(1U << ASYNCB_AUTOPROBE)
+
+#define ASYNC_FLAGS		((1U << (ASYNCB_LAST_USER + 1)) - 1)
+#define ASYNC_USR_MASK		(ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \
+		ASYNC_LOW_LATENCY)
+#define ASYNC_SPD_CUST		(ASYNC_SPD_HI|ASYNC_SPD_VHI)
+#define ASYNC_SPD_WARP		(ASYNC_SPD_HI|ASYNC_SPD_SHI)
+#define ASYNC_SPD_MASK		(ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
+
+#define ASYNC_INITIALIZED	(1U << ASYNCB_INITIALIZED)
+#define ASYNC_NORMAL_ACTIVE	(1U << ASYNCB_NORMAL_ACTIVE)
+#define ASYNC_BOOT_AUTOCONF	(1U << ASYNCB_BOOT_AUTOCONF)
+#define ASYNC_CLOSING		(1U << ASYNCB_CLOSING)
+#define ASYNC_CTS_FLOW		(1U << ASYNCB_CTS_FLOW)
+#define ASYNC_CHECK_CD		(1U << ASYNCB_CHECK_CD)
+#define ASYNC_SHARE_IRQ		(1U << ASYNCB_SHARE_IRQ)
+#define ASYNC_CONS_FLOW		(1U << ASYNCB_CONS_FLOW)
+#define ASYNC_BOOT_ONLYMCA	(1U << ASYNCB_BOOT_ONLYMCA)
+#define ASYNC_INTERNAL_FLAGS	(~((1U << ASYNCB_FIRST_KERNEL) - 1))
+
+/*
+ * Multiport serial configuration structure --- external structure
+ */
+struct serial_multiport_struct {
+	int		irq;
+	int		port1;
+	unsigned char	mask1, match1;
+	int		port2;
+	unsigned char	mask2, match2;
+	int		port3;
+	unsigned char	mask3, match3;
+	int		port4;
+	unsigned char	mask4, match4;
+	int		port_monitor;
+	int	reserved[32];
+};
+
+/*
+ * Serial input interrupt line counters -- external structure
+ * Four lines can interrupt: CTS, DSR, RI, DCD
+ */
+struct serial_icounter_struct {
+	int cts, dsr, rng, dcd;
+	int rx, tx;
+	int frame, overrun, parity, brk;
+	int buf_overrun;
+	int reserved[9];
+};
+
+/*
+ * Serial interface for controlling RS485 settings on chips with suitable
+ * support. Set with TIOCSRS485 and get with TIOCGRS485 if supported by your
+ * platform. The set function returns the new state, with any unsupported bits
+ * reverted appropriately.
+ */
+
+struct serial_rs485 {
+	__u32	flags;			/* RS485 feature flags */
+#define SER_RS485_ENABLED		(1 << 0)	/* If enabled */
+#define SER_RS485_RTS_ON_SEND		(1 << 1)	/* Logical level for
+							   RTS pin when
+							   sending */
+#define SER_RS485_RTS_AFTER_SEND	(1 << 2)	/* Logical level for
+							   RTS pin after sent*/
+#define SER_RS485_RX_DURING_TX		(1 << 4)
+	__u32	delay_rts_before_send;	/* Delay before send (milliseconds) */
+	__u32	delay_rts_after_send;	/* Delay after send (milliseconds) */
+	__u32	padding[5];		/* Memory is cheap, new structs
+					   are a royal PITA .. */
+};
+
+#ifdef __KERNEL__
+#include <linux/compiler.h>
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_SERIAL_H */
diff --git a/include/linux/serial167.h b/include/linux/serial167.h
new file mode 100644
index 00000000..59c81b70
--- /dev/null
+++ b/include/linux/serial167.h
@@ -0,0 +1,157 @@
+/*
+ * serial167.h
+ *
+ * Richard Hirst [richard@sleepie.demon.co.uk]
+ *
+ * Based on cyclades.h
+ */
+
+struct cyclades_monitor {
+        unsigned long           int_count;
+        unsigned long           char_count;
+        unsigned long           char_max;
+        unsigned long           char_last;
+};
+
+/*
+ * This is our internal structure for each serial port's state.
+ * 
+ * Many fields are paralleled by the structure used by the serial_struct
+ * structure.
+ *
+ * For definitions of the flags field, see tty.h
+ */
+
+struct cyclades_port {
+	int                     magic;
+	int                     type;
+	int			card;
+	int			line;
+	int			flags; 		/* defined in tty.h */
+	struct tty_struct 	*tty;
+	int			read_status_mask;
+	int			timeout;
+	int			xmit_fifo_size;
+	int                     cor1,cor2,cor3,cor4,cor5,cor6,cor7;
+	int                     tbpr,tco,rbpr,rco;
+	int			ignore_status_mask;
+	int			close_delay;
+	int			IER; 	/* Interrupt Enable Register */
+	unsigned long		last_active;
+	int			count;	/* # of fd on device */
+	int                     x_char; /* to be pushed out ASAP */
+	int                     x_break;
+	int			blocked_open; /* # of blocked opens */
+	unsigned char 		*xmit_buf;
+	int			xmit_head;
+	int			xmit_tail;
+	int			xmit_cnt;
+        int                     default_threshold;
+        int                     default_timeout;
+	wait_queue_head_t	open_wait;
+	wait_queue_head_t	close_wait;
+        struct cyclades_monitor mon;
+};
+
+#define CYCLADES_MAGIC  0x4359
+
+#define CYGETMON                0x435901
+#define CYGETTHRESH             0x435902
+#define CYSETTHRESH             0x435903
+#define CYGETDEFTHRESH          0x435904
+#define CYSETDEFTHRESH          0x435905
+#define CYGETTIMEOUT            0x435906
+#define CYSETTIMEOUT            0x435907
+#define CYGETDEFTIMEOUT         0x435908
+#define CYSETDEFTIMEOUT         0x435909
+
+#define CyMaxChipsPerCard 1
+
+/**** cd2401 registers ****/
+
+#define CyGFRCR         (0x81)
+#define CyCCR		(0x13)
+#define      CyCLR_CHAN		(0x40)
+#define      CyINIT_CHAN	(0x20)
+#define      CyCHIP_RESET	(0x10)
+#define      CyENB_XMTR		(0x08)
+#define      CyDIS_XMTR		(0x04)
+#define      CyENB_RCVR		(0x02)
+#define      CyDIS_RCVR		(0x01)
+#define CyCAR		(0xee)
+#define CyIER		(0x11)
+#define      CyMdmCh		(0x80)
+#define      CyRxExc		(0x20)
+#define      CyRxData		(0x08)
+#define      CyTxMpty		(0x02)
+#define      CyTxRdy		(0x01)
+#define CyLICR		(0x26)
+#define CyRISR		(0x89)
+#define      CyTIMEOUT		(0x80)
+#define      CySPECHAR		(0x70)
+#define      CyOVERRUN		(0x08)
+#define      CyPARITY		(0x04)
+#define      CyFRAME		(0x02)
+#define      CyBREAK		(0x01)
+#define CyREOIR		(0x84)
+#define CyTEOIR		(0x85)
+#define CyMEOIR		(0x86)
+#define      CyNOTRANS		(0x08)
+#define CyRFOC		(0x30)
+#define CyRDR		(0xf8)
+#define CyTDR		(0xf8)
+#define CyMISR		(0x8b)
+#define CyRISR		(0x89)
+#define CyTISR		(0x8a)
+#define CyMSVR1		(0xde)
+#define CyMSVR2		(0xdf)
+#define      CyDSR		(0x80)
+#define      CyDCD		(0x40)
+#define      CyCTS		(0x20)
+#define      CyDTR		(0x02)
+#define      CyRTS		(0x01)
+#define CyRTPRL		(0x25)
+#define CyRTPRH		(0x24)
+#define CyCOR1		(0x10)
+#define      CyPARITY_NONE	(0x00)
+#define      CyPARITY_E		(0x40)
+#define      CyPARITY_O		(0xC0)
+#define      Cy_5_BITS		(0x04)
+#define      Cy_6_BITS		(0x05)
+#define      Cy_7_BITS		(0x06)
+#define      Cy_8_BITS		(0x07)
+#define CyCOR2		(0x17)
+#define      CyETC		(0x20)
+#define      CyCtsAE		(0x02)
+#define CyCOR3		(0x16)
+#define      Cy_1_STOP		(0x02)
+#define      Cy_2_STOP		(0x04)
+#define CyCOR4		(0x15)
+#define      CyREC_FIFO		(0x0F)  /* Receive FIFO threshold */
+#define CyCOR5		(0x14)
+#define CyCOR6		(0x18)
+#define CyCOR7		(0x07)
+#define CyRBPR		(0xcb)
+#define CyRCOR		(0xc8)
+#define CyTBPR		(0xc3)
+#define CyTCOR		(0xc0)
+#define CySCHR1		(0x1f)
+#define CySCHR2 	(0x1e)
+#define CyTPR		(0xda)
+#define CyPILR1		(0xe3)
+#define CyPILR2		(0xe0)
+#define CyPILR3		(0xe1)
+#define CyCMR		(0x1b)
+#define      CyASYNC		(0x02)
+#define CyLICR          (0x26)
+#define CyLIVR          (0x09)
+#define CySCRL		(0x23)
+#define CySCRH		(0x22)
+#define CyTFTC		(0x80)
+
+
+/* max number of chars in the FIFO */
+
+#define CyMAX_CHAR_FIFO	12
+
+/***************************************************************************/
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
new file mode 100644
index 00000000..8f012f8a
--- /dev/null
+++ b/include/linux/serial_8250.h
@@ -0,0 +1,95 @@
+/*
+ *  linux/include/linux/serial_8250.h
+ *
+ *  Copyright (C) 2004 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef _LINUX_SERIAL_8250_H
+#define _LINUX_SERIAL_8250_H
+
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+/*
+ * This is the platform device platform_data structure
+ */
+struct plat_serial8250_port {
+	unsigned long	iobase;		/* io base address */
+	void __iomem	*membase;	/* ioremap cookie or NULL */
+	resource_size_t	mapbase;	/* resource base */
+	unsigned int	irq;		/* interrupt number */
+	unsigned long	irqflags;	/* request_irq flags */
+	unsigned int	uartclk;	/* UART clock rate */
+	void            *private_data;
+	unsigned char	regshift;	/* register shift */
+	unsigned char	iotype;		/* UPIO_* */
+	unsigned char	hub6;
+	upf_t		flags;		/* UPF_* flags */
+	unsigned int	type;		/* If UPF_FIXED_TYPE */
+	unsigned int	(*serial_in)(struct uart_port *, int);
+	void		(*serial_out)(struct uart_port *, int, int);
+	void		(*set_termios)(struct uart_port *,
+			               struct ktermios *new,
+			               struct ktermios *old);
+	int		(*handle_irq)(struct uart_port *);
+	void		(*pm)(struct uart_port *, unsigned int state,
+			      unsigned old);
+};
+
+/*
+ * Allocate 8250 platform device IDs.  Nothing is implied by
+ * the numbering here, except for the legacy entry being -1.
+ */
+enum {
+	PLAT8250_DEV_LEGACY = -1,
+	PLAT8250_DEV_PLATFORM,
+	PLAT8250_DEV_PLATFORM1,
+	PLAT8250_DEV_PLATFORM2,
+	PLAT8250_DEV_FOURPORT,
+	PLAT8250_DEV_ACCENT,
+	PLAT8250_DEV_BOCA,
+	PLAT8250_DEV_EXAR_ST16C554,
+	PLAT8250_DEV_HUB6,
+	PLAT8250_DEV_MCA,
+	PLAT8250_DEV_AU1X00,
+	PLAT8250_DEV_SM501,
+};
+
+/*
+ * This should be used by drivers which want to register
+ * their own 8250 ports without registering their own
+ * platform device.  Using these will make your driver
+ * dependent on the 8250 driver.
+ */
+struct uart_port;
+struct uart_8250_port;
+
+int serial8250_register_port(struct uart_port *);
+void serial8250_unregister_port(int line);
+void serial8250_suspend_port(int line);
+void serial8250_resume_port(int line);
+
+extern int early_serial_setup(struct uart_port *port);
+
+extern int serial8250_find_port(struct uart_port *p);
+extern int serial8250_find_port_for_earlycon(void);
+extern int setup_early_serial8250_console(char *cmdline);
+extern void serial8250_do_set_termios(struct uart_port *port,
+		struct ktermios *termios, struct ktermios *old);
+extern void serial8250_do_pm(struct uart_port *port, unsigned int state,
+			     unsigned int oldstate);
+extern int fsl8250_handle_irq(struct uart_port *port);
+int serial8250_handle_irq(struct uart_port *port, unsigned int iir);
+unsigned char serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr);
+void serial8250_tx_chars(struct uart_8250_port *up);
+unsigned int serial8250_modem_status(struct uart_8250_port *up);
+
+extern void serial8250_set_isa_configurator(void (*v)
+					(int port, struct uart_port *up,
+						unsigned short *capabilities));
+
+#endif
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
new file mode 100644
index 00000000..828c8037
--- /dev/null
+++ b/include/linux/serial_core.h
@@ -0,0 +1,560 @@
+/*
+ *  linux/drivers/char/serial_core.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef LINUX_SERIAL_CORE_H
+#define LINUX_SERIAL_CORE_H
+
+#include <linux/serial.h>
+
+/*
+ * The type definitions.  These are from Ted Ts'o's serial.h
+ */
+#define PORT_UNKNOWN	0
+#define PORT_8250	1
+#define PORT_16450	2
+#define PORT_16550	3
+#define PORT_16550A	4
+#define PORT_CIRRUS	5
+#define PORT_16650	6
+#define PORT_16650V2	7
+#define PORT_16750	8
+#define PORT_STARTECH	9
+#define PORT_16C950	10
+#define PORT_16654	11
+#define PORT_16850	12
+#define PORT_RSA	13
+#define PORT_NS16550A	14
+#define PORT_XSCALE	15
+#define PORT_RM9000	16	/* PMC-Sierra RM9xxx internal UART */
+#define PORT_OCTEON	17	/* Cavium OCTEON internal UART */
+#define PORT_AR7	18	/* Texas Instruments AR7 internal UART */
+#define PORT_U6_16550A	19	/* ST-Ericsson U6xxx internal UART */
+#define PORT_TEGRA	20	/* NVIDIA Tegra internal UART */
+#define PORT_XR17D15X	21	/* Exar XR17D15x UART */
+#define PORT_MAX_8250	21	/* max port ID */
+
+/*
+ * ARM specific type numbers.  These are not currently guaranteed
+ * to be implemented, and will change in the future.  These are
+ * separate so any additions to the old serial.c that occur before
+ * we are merged can be easily merged here.
+ */
+#define PORT_PXA	31
+#define PORT_AMBA	32
+#define PORT_CLPS711X	33
+#define PORT_SA1100	34
+#define PORT_UART00	35
+#define PORT_21285	37
+
+/* Sparc type numbers.  */
+#define PORT_SUNZILOG	38
+#define PORT_SUNSAB	39
+
+/* DEC */
+#define PORT_DZ		46
+#define PORT_ZS		47
+
+/* Parisc type numbers. */
+#define PORT_MUX	48
+
+/* Atmel AT91 / AT32 SoC */
+#define PORT_ATMEL	49
+
+/* Macintosh Zilog type numbers */
+#define PORT_MAC_ZILOG	50	/* m68k : not yet implemented */
+#define PORT_PMAC_ZILOG	51
+
+/* SH-SCI */
+#define PORT_SCI	52
+#define PORT_SCIF	53
+#define PORT_IRDA	54
+
+/* Samsung S3C2410 SoC and derivatives thereof */
+#define PORT_S3C2410    55
+
+/* SGI IP22 aka Indy / Challenge S / Indigo 2 */
+#define PORT_IP22ZILOG	56
+
+/* Sharp LH7a40x -- an ARM9 SoC series */
+#define PORT_LH7A40X	57
+
+/* PPC CPM type number */
+#define PORT_CPM        58
+
+/* MPC52xx (and MPC512x) type numbers */
+#define PORT_MPC52xx	59
+
+/* IBM icom */
+#define PORT_ICOM	60
+
+/* Samsung S3C2440 SoC */
+#define PORT_S3C2440	61
+
+/* Motorola i.MX SoC */
+#define PORT_IMX	62
+
+/* Marvell MPSC */
+#define PORT_MPSC	63
+
+/* TXX9 type number */
+#define PORT_TXX9	64
+
+/* NEC VR4100 series SIU/DSIU */
+#define PORT_VR41XX_SIU		65
+#define PORT_VR41XX_DSIU	66
+
+/* Samsung S3C2400 SoC */
+#define PORT_S3C2400	67
+
+/* M32R SIO */
+#define PORT_M32R_SIO	68
+
+/*Digi jsm */
+#define PORT_JSM        69
+
+#define PORT_PNX8XXX	70
+
+/* Hilscher netx */
+#define PORT_NETX	71
+
+/* SUN4V Hypervisor Console */
+#define PORT_SUNHV	72
+
+#define PORT_S3C2412	73
+
+/* Xilinx uartlite */
+#define PORT_UARTLITE	74
+
+/* Blackfin bf5xx */
+#define PORT_BFIN	75
+
+/* Micrel KS8695 */
+#define PORT_KS8695	76
+
+/* Broadcom SB1250, etc. SOC */
+#define PORT_SB1250_DUART	77
+
+/* Freescale ColdFire */
+#define PORT_MCF	78
+
+/* Blackfin SPORT */
+#define PORT_BFIN_SPORT		79
+
+/* MN10300 on-chip UART numbers */
+#define PORT_MN10300		80
+#define PORT_MN10300_CTS	81
+
+#define PORT_SC26XX	82
+
+/* SH-SCI */
+#define PORT_SCIFA	83
+
+#define PORT_S3C6400	84
+
+/* NWPSERIAL */
+#define PORT_NWPSERIAL	85
+
+/* MAX3100 */
+#define PORT_MAX3100    86
+
+/* Timberdale UART */
+#define PORT_TIMBUART	87
+
+/* Qualcomm MSM SoCs */
+#define PORT_MSM	88
+
+/* BCM63xx family SoCs */
+#define PORT_BCM63XX	89
+
+/* Aeroflex Gaisler GRLIB APBUART */
+#define PORT_APBUART    90
+
+/* Altera UARTs */
+#define PORT_ALTERA_JTAGUART	91
+#define PORT_ALTERA_UART	92
+
+/* SH-SCI */
+#define PORT_SCIFB	93
+
+/* MAX3107 */
+#define PORT_MAX3107	94
+
+/* High Speed UART for Medfield */
+#define PORT_MFD	95
+
+/* TI OMAP-UART */
+#define PORT_OMAP	96
+
+/* VIA VT8500 SoC */
+#define PORT_VT8500	97
+
+/* Xilinx PSS UART */
+#define PORT_XUARTPS	98
+
+/* Atheros AR933X SoC */
+#define PORT_AR933X	99
+
+/* Energy Micro efm32 SoC */
+#define PORT_EFMUART   100
+
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/interrupt.h>
+#include <linux/circ_buf.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/tty.h>
+#include <linux/mutex.h>
+#include <linux/sysrq.h>
+#include <linux/pps_kernel.h>
+
+struct uart_port;
+struct serial_struct;
+struct device;
+
+/*
+ * This structure describes all the operations that can be
+ * done on the physical hardware.
+ */
+struct uart_ops {
+	unsigned int	(*tx_empty)(struct uart_port *);
+	void		(*set_mctrl)(struct uart_port *, unsigned int mctrl);
+	unsigned int	(*get_mctrl)(struct uart_port *);
+	void		(*stop_tx)(struct uart_port *);
+	void		(*start_tx)(struct uart_port *);
+	void		(*send_xchar)(struct uart_port *, char ch);
+	void		(*stop_rx)(struct uart_port *);
+	void		(*enable_ms)(struct uart_port *);
+	void		(*break_ctl)(struct uart_port *, int ctl);
+	int		(*startup)(struct uart_port *);
+	void		(*shutdown)(struct uart_port *);
+	void		(*flush_buffer)(struct uart_port *);
+	void		(*set_termios)(struct uart_port *, struct ktermios *new,
+				       struct ktermios *old);
+	void		(*set_ldisc)(struct uart_port *, int new);
+	void		(*pm)(struct uart_port *, unsigned int state,
+			      unsigned int oldstate);
+	int		(*set_wake)(struct uart_port *, unsigned int state);
+	void		(*wake_peer)(struct uart_port *);
+
+	/*
+	 * Return a string describing the type of the port
+	 */
+	const char *(*type)(struct uart_port *);
+
+	/*
+	 * Release IO and memory resources used by the port.
+	 * This includes iounmap if necessary.
+	 */
+	void		(*release_port)(struct uart_port *);
+
+	/*
+	 * Request IO and memory resources used by the port.
+	 * This includes iomapping the port if necessary.
+	 */
+	int		(*request_port)(struct uart_port *);
+	void		(*config_port)(struct uart_port *, int);
+	int		(*verify_port)(struct uart_port *, struct serial_struct *);
+	int		(*ioctl)(struct uart_port *, unsigned int, unsigned long);
+#ifdef CONFIG_CONSOLE_POLL
+	void	(*poll_put_char)(struct uart_port *, unsigned char);
+	int		(*poll_get_char)(struct uart_port *);
+#endif
+};
+
+#define NO_POLL_CHAR		0x00ff0000
+#define UART_CONFIG_TYPE	(1 << 0)
+#define UART_CONFIG_IRQ		(1 << 1)
+
+struct uart_icount {
+	__u32	cts;
+	__u32	dsr;
+	__u32	rng;
+	__u32	dcd;
+	__u32	rx;
+	__u32	tx;
+	__u32	frame;
+	__u32	overrun;
+	__u32	parity;
+	__u32	brk;
+	__u32	buf_overrun;
+};
+
+typedef unsigned int __bitwise__ upf_t;
+
+struct uart_port {
+	spinlock_t		lock;			/* port lock */
+	unsigned long		iobase;			/* in/out[bwl] */
+	unsigned char __iomem	*membase;		/* read/write[bwl] */
+	unsigned int		(*serial_in)(struct uart_port *, int);
+	void			(*serial_out)(struct uart_port *, int, int);
+	void			(*set_termios)(struct uart_port *,
+				               struct ktermios *new,
+				               struct ktermios *old);
+	int			(*handle_irq)(struct uart_port *);
+	void			(*pm)(struct uart_port *, unsigned int state,
+				      unsigned int old);
+	unsigned int		irq;			/* irq number */
+	unsigned long		irqflags;		/* irq flags  */
+	unsigned int		uartclk;		/* base uart clock */
+	unsigned int		fifosize;		/* tx fifo size */
+	unsigned char		x_char;			/* xon/xoff char */
+	unsigned char		regshift;		/* reg offset shift */
+	unsigned char		iotype;			/* io access style */
+	unsigned char		unused1;
+
+#define UPIO_PORT		(0)
+#define UPIO_HUB6		(1)
+#define UPIO_MEM		(2)
+#define UPIO_MEM32		(3)
+#define UPIO_AU			(4)			/* Au1x00 type IO */
+#define UPIO_TSI		(5)			/* Tsi108/109 type IO */
+#define UPIO_RM9000		(6)			/* RM9000 type IO */
+
+	unsigned int		read_status_mask;	/* driver specific */
+	unsigned int		ignore_status_mask;	/* driver specific */
+	struct uart_state	*state;			/* pointer to parent state */
+	struct uart_icount	icount;			/* statistics */
+
+	struct console		*cons;			/* struct console, if any */
+#if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(SUPPORT_SYSRQ)
+	unsigned long		sysrq;			/* sysrq timeout */
+#endif
+
+	upf_t			flags;
+
+#define UPF_FOURPORT		((__force upf_t) (1 << 1))
+#define UPF_SAK			((__force upf_t) (1 << 2))
+#define UPF_SPD_MASK		((__force upf_t) (0x1030))
+#define UPF_SPD_HI		((__force upf_t) (0x0010))
+#define UPF_SPD_VHI		((__force upf_t) (0x0020))
+#define UPF_SPD_CUST		((__force upf_t) (0x0030))
+#define UPF_SPD_SHI		((__force upf_t) (0x1000))
+#define UPF_SPD_WARP		((__force upf_t) (0x1010))
+#define UPF_SKIP_TEST		((__force upf_t) (1 << 6))
+#define UPF_AUTO_IRQ		((__force upf_t) (1 << 7))
+#define UPF_HARDPPS_CD		((__force upf_t) (1 << 11))
+#define UPF_LOW_LATENCY		((__force upf_t) (1 << 13))
+#define UPF_BUGGY_UART		((__force upf_t) (1 << 14))
+#define UPF_NO_TXEN_TEST	((__force upf_t) (1 << 15))
+#define UPF_MAGIC_MULTIPLIER	((__force upf_t) (1 << 16))
+#define UPF_CONS_FLOW		((__force upf_t) (1 << 23))
+#define UPF_SHARE_IRQ		((__force upf_t) (1 << 24))
+#define UPF_EXAR_EFR		((__force upf_t) (1 << 25))
+#define UPF_BUG_THRE		((__force upf_t) (1 << 26))
+/* The exact UART type is known and should not be probed.  */
+#define UPF_FIXED_TYPE		((__force upf_t) (1 << 27))
+#define UPF_BOOT_AUTOCONF	((__force upf_t) (1 << 28))
+#define UPF_FIXED_PORT		((__force upf_t) (1 << 29))
+#define UPF_DEAD		((__force upf_t) (1 << 30))
+#define UPF_IOREMAP		((__force upf_t) (1 << 31))
+
+#define UPF_CHANGE_MASK		((__force upf_t) (0x17fff))
+#define UPF_USR_MASK		((__force upf_t) (UPF_SPD_MASK|UPF_LOW_LATENCY))
+
+	unsigned int		mctrl;			/* current modem ctrl settings */
+	unsigned int		timeout;		/* character-based timeout */
+	unsigned int		type;			/* port type */
+	const struct uart_ops	*ops;
+	unsigned int		custom_divisor;
+	unsigned int		line;			/* port index */
+	resource_size_t		mapbase;		/* for ioremap */
+	struct device		*dev;			/* parent device */
+	unsigned char		hub6;			/* this should be in the 8250 driver */
+	unsigned char		suspended;
+	unsigned char		irq_wake;
+	unsigned char		unused[2];
+	void			*private_data;		/* generic platform data pointer */
+};
+
+static inline int serial_port_in(struct uart_port *up, int offset)
+{
+	return up->serial_in(up, offset);
+}
+
+static inline void serial_port_out(struct uart_port *up, int offset, int value)
+{
+	up->serial_out(up, offset, value);
+}
+
+/*
+ * This is the state information which is persistent across opens.
+ */
+struct uart_state {
+	struct tty_port		port;
+
+	int			pm_state;
+	struct circ_buf		xmit;
+
+	struct uart_port	*uart_port;
+};
+
+#define UART_XMIT_SIZE	PAGE_SIZE
+
+
+/* number of characters left in xmit buffer before we ask for more */
+#define WAKEUP_CHARS		256
+
+struct module;
+struct tty_driver;
+
+struct uart_driver {
+	struct module		*owner;
+	const char		*driver_name;
+	const char		*dev_name;
+	int			 major;
+	int			 minor;
+	int			 nr;
+	struct console		*cons;
+
+	/*
+	 * these are private; the low level driver should not
+	 * touch these; they should be initialised to NULL
+	 */
+	struct uart_state	*state;
+	struct tty_driver	*tty_driver;
+};
+
+void uart_write_wakeup(struct uart_port *port);
+
+/*
+ * Baud rate helpers.
+ */
+void uart_update_timeout(struct uart_port *port, unsigned int cflag,
+			 unsigned int baud);
+unsigned int uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
+				struct ktermios *old, unsigned int min,
+				unsigned int max);
+unsigned int uart_get_divisor(struct uart_port *port, unsigned int baud);
+
+/* Base timer interval for polling */
+static inline int uart_poll_timeout(struct uart_port *port)
+{
+	int timeout = port->timeout;
+
+	return timeout > 6 ? (timeout / 2 - 2) : 1;
+}
+
+/*
+ * Console helpers.
+ */
+struct uart_port *uart_get_console(struct uart_port *ports, int nr,
+				   struct console *c);
+void uart_parse_options(char *options, int *baud, int *parity, int *bits,
+			int *flow);
+int uart_set_options(struct uart_port *port, struct console *co, int baud,
+		     int parity, int bits, int flow);
+struct tty_driver *uart_console_device(struct console *co, int *index);
+void uart_console_write(struct uart_port *port, const char *s,
+			unsigned int count,
+			void (*putchar)(struct uart_port *, int));
+
+/*
+ * Port/driver registration/removal
+ */
+int uart_register_driver(struct uart_driver *uart);
+void uart_unregister_driver(struct uart_driver *uart);
+int uart_add_one_port(struct uart_driver *reg, struct uart_port *port);
+int uart_remove_one_port(struct uart_driver *reg, struct uart_port *port);
+int uart_match_port(struct uart_port *port1, struct uart_port *port2);
+
+/*
+ * Power Management
+ */
+int uart_suspend_port(struct uart_driver *reg, struct uart_port *port);
+int uart_resume_port(struct uart_driver *reg, struct uart_port *port);
+
+#define uart_circ_empty(circ)		((circ)->head == (circ)->tail)
+#define uart_circ_clear(circ)		((circ)->head = (circ)->tail = 0)
+
+#define uart_circ_chars_pending(circ)	\
+	(CIRC_CNT((circ)->head, (circ)->tail, UART_XMIT_SIZE))
+
+#define uart_circ_chars_free(circ)	\
+	(CIRC_SPACE((circ)->head, (circ)->tail, UART_XMIT_SIZE))
+
+static inline int uart_tx_stopped(struct uart_port *port)
+{
+	struct tty_struct *tty = port->state->port.tty;
+	if(tty->stopped || tty->hw_stopped)
+		return 1;
+	return 0;
+}
+
+/*
+ * The following are helper functions for the low level drivers.
+ */
+
+extern void uart_handle_dcd_change(struct uart_port *uport,
+		unsigned int status);
+extern void uart_handle_cts_change(struct uart_port *uport,
+		unsigned int status);
+
+extern void uart_insert_char(struct uart_port *port, unsigned int status,
+		 unsigned int overrun, unsigned int ch, unsigned int flag);
+
+#ifdef SUPPORT_SYSRQ
+static inline int
+uart_handle_sysrq_char(struct uart_port *port, unsigned int ch)
+{
+	if (port->sysrq) {
+		if (ch && time_before(jiffies, port->sysrq)) {
+			handle_sysrq(ch);
+			port->sysrq = 0;
+			return 1;
+		}
+		port->sysrq = 0;
+	}
+	return 0;
+}
+#else
+#define uart_handle_sysrq_char(port,ch) ({ (void)port; 0; })
+#endif
+
+/*
+ * We do the SysRQ and SAK checking like this...
+ */
+static inline int uart_handle_break(struct uart_port *port)
+{
+	struct uart_state *state = port->state;
+#ifdef SUPPORT_SYSRQ
+	if (port->cons && port->cons->index == port->line) {
+		if (!port->sysrq) {
+			port->sysrq = jiffies + HZ*5;
+			return 1;
+		}
+		port->sysrq = 0;
+	}
+#endif
+	if (port->flags & UPF_SAK)
+		do_SAK(state->port.tty);
+	return 0;
+}
+
+/*
+ *	UART_ENABLE_MS - determine if port should enable modem status irqs
+ */
+#define UART_ENABLE_MS(port,cflag)	((port)->flags & UPF_HARDPPS_CD || \
+					 (cflag) & CRTSCTS || \
+					 !((cflag) & CLOCAL))
+
+#endif
+
+#endif /* LINUX_SERIAL_CORE_H */
diff --git a/include/linux/serial_max3100.h b/include/linux/serial_max3100.h
new file mode 100644
index 00000000..4976befb
--- /dev/null
+++ b/include/linux/serial_max3100.h
@@ -0,0 +1,52 @@
+/*
+ *
+ *  Copyright (C) 2007 Christian Pellegrin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+
+#ifndef _LINUX_SERIAL_MAX3100_H
+#define _LINUX_SERIAL_MAX3100_H 1
+
+
+/**
+ * struct plat_max3100 - MAX3100 SPI UART platform data
+ * @loopback:            force MAX3100 in loopback
+ * @crystal:             1 for 3.6864 Mhz, 0 for 1.8432
+ * @max3100_hw_suspend:  MAX3100 has a shutdown pin. This is a hook
+ *                       called on suspend and resume to activate it.
+ * @poll_time:           poll time for CTS signal in ms, 0 disables (so no hw
+ *                       flow ctrl is possible but you have less CPU usage)
+ *
+ * You should use this structure in your machine description to specify
+ * how the MAX3100 is connected. Example:
+ *
+ * static struct plat_max3100 max3100_plat_data = {
+ *  .loopback = 0,
+ *  .crystal = 0,
+ *  .poll_time = 100,
+ * };
+ *
+ * static struct spi_board_info spi_board_info[] = {
+ * {
+ *  .modalias	= "max3100",
+ *  .platform_data	= &max3100_plat_data,
+ *  .irq		= IRQ_EINT12,
+ *  .max_speed_hz	= 5*1000*1000,
+ *  .chip_select	= 0,
+ * },
+ * };
+ *
+ **/
+struct plat_max3100 {
+	int loopback;
+	int crystal;
+	void (*max3100_hw_suspend) (int suspend);
+	int poll_time;
+};
+
+#endif
diff --git a/include/linux/serial_mfd.h b/include/linux/serial_mfd.h
new file mode 100644
index 00000000..2b071e0b
--- /dev/null
+++ b/include/linux/serial_mfd.h
@@ -0,0 +1,47 @@
+#ifndef _SERIAL_MFD_H_
+#define _SERIAL_MFD_H_
+
+/* HW register offset definition */
+#define UART_FOR	0x08
+#define UART_PS		0x0C
+#define UART_MUL	0x0D
+#define UART_DIV	0x0E
+
+#define HSU_GBL_IEN	0x0
+#define HSU_GBL_IST	0x4
+
+#define HSU_GBL_INT_BIT_PORT0	0x0
+#define HSU_GBL_INT_BIT_PORT1	0x1
+#define HSU_GBL_INT_BIT_PORT2	0x2
+#define HSU_GBL_INT_BIT_IRI	0x3
+#define HSU_GBL_INT_BIT_HDLC	0x4
+#define HSU_GBL_INT_BIT_DMA	0x5
+
+#define HSU_GBL_ISR	0x8
+#define HSU_GBL_DMASR	0x400
+#define HSU_GBL_DMAISR	0x404
+
+#define HSU_PORT_REG_OFFSET	0x80
+#define HSU_PORT0_REG_OFFSET	0x80
+#define HSU_PORT1_REG_OFFSET	0x100
+#define HSU_PORT2_REG_OFFSET	0x180
+#define HSU_PORT_REG_LENGTH	0x80
+
+#define HSU_DMA_CHANS_REG_OFFSET	0x500
+#define HSU_DMA_CHANS_REG_LENGTH	0x40
+
+#define HSU_CH_SR		0x0	/* channel status reg */
+#define HSU_CH_CR		0x4	/* control reg */
+#define HSU_CH_DCR		0x8	/* descriptor control reg */
+#define HSU_CH_BSR		0x10	/* max fifo buffer size reg */
+#define HSU_CH_MOTSR		0x14	/* minimum ocp transfer size */
+#define HSU_CH_D0SAR		0x20	/* desc 0 start addr */
+#define HSU_CH_D0TSR		0x24	/* desc 0 transfer size */
+#define HSU_CH_D1SAR		0x28
+#define HSU_CH_D1TSR		0x2C
+#define HSU_CH_D2SAR		0x30
+#define HSU_CH_D2TSR		0x34
+#define HSU_CH_D3SAR		0x38
+#define HSU_CH_D3TSR		0x3C
+
+#endif
diff --git a/include/linux/serial_pnx8xxx.h b/include/linux/serial_pnx8xxx.h
new file mode 100644
index 00000000..79ad87b0
--- /dev/null
+++ b/include/linux/serial_pnx8xxx.h
@@ -0,0 +1,80 @@
+/*
+ * Embedded Alley Solutions, source@embeddedalley.com.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _LINUX_SERIAL_PNX8XXX_H
+#define _LINUX_SERIAL_PNX8XXX_H
+
+#include <linux/serial_core.h>
+
+#define PNX8XXX_NR_PORTS	2
+
+struct pnx8xxx_port {
+	struct uart_port	port;
+	struct timer_list	timer;
+	unsigned int		old_status;
+};
+
+/* register offsets */
+#define PNX8XXX_LCR		0
+#define PNX8XXX_MCR		0x004
+#define PNX8XXX_BAUD		0x008
+#define PNX8XXX_CFG		0x00c
+#define PNX8XXX_FIFO		0x028
+#define PNX8XXX_ISTAT		0xfe0
+#define PNX8XXX_IEN		0xfe4
+#define PNX8XXX_ICLR		0xfe8
+#define PNX8XXX_ISET		0xfec
+#define PNX8XXX_PD		0xff4
+#define PNX8XXX_MID		0xffc
+
+#define PNX8XXX_UART_LCR_TXBREAK	(1<<30)
+#define PNX8XXX_UART_LCR_PAREVN		0x10000000
+#define PNX8XXX_UART_LCR_PAREN		0x08000000
+#define PNX8XXX_UART_LCR_2STOPB		0x04000000
+#define PNX8XXX_UART_LCR_8BIT		0x01000000
+#define PNX8XXX_UART_LCR_TX_RST		0x00040000
+#define PNX8XXX_UART_LCR_RX_RST		0x00020000
+#define PNX8XXX_UART_LCR_RX_NEXT	0x00010000
+
+#define PNX8XXX_UART_MCR_SCR		0xFF000000
+#define PNX8XXX_UART_MCR_DCD		0x00800000
+#define PNX8XXX_UART_MCR_CTS		0x00100000
+#define PNX8XXX_UART_MCR_LOOP		0x00000010
+#define PNX8XXX_UART_MCR_RTS		0x00000002
+#define PNX8XXX_UART_MCR_DTR		0x00000001
+
+#define PNX8XXX_UART_INT_TX		0x00000080
+#define PNX8XXX_UART_INT_EMPTY		0x00000040
+#define PNX8XXX_UART_INT_RCVTO		0x00000020
+#define PNX8XXX_UART_INT_RX		0x00000010
+#define PNX8XXX_UART_INT_RXOVRN		0x00000008
+#define PNX8XXX_UART_INT_FRERR		0x00000004
+#define PNX8XXX_UART_INT_BREAK		0x00000002
+#define PNX8XXX_UART_INT_PARITY		0x00000001
+#define PNX8XXX_UART_INT_ALLRX		0x0000003F
+#define PNX8XXX_UART_INT_ALLTX		0x000000C0
+
+#define PNX8XXX_UART_FIFO_TXFIFO	0x001F0000
+#define PNX8XXX_UART_FIFO_TXFIFO_STA	(0x1f<<16)
+#define PNX8XXX_UART_FIFO_RXBRK		0x00008000
+#define PNX8XXX_UART_FIFO_RXFE		0x00004000
+#define PNX8XXX_UART_FIFO_RXPAR		0x00002000
+#define PNX8XXX_UART_FIFO_RXFIFO	0x00001F00
+#define PNX8XXX_UART_FIFO_RBRTHR	0x000000FF
+
+#endif
diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h
new file mode 100644
index 00000000..8ce70d76
--- /dev/null
+++ b/include/linux/serial_reg.h
@@ -0,0 +1,367 @@
+/*
+ * include/linux/serial_reg.h
+ *
+ * Copyright (C) 1992, 1994 by Theodore Ts'o.
+ * 
+ * Redistribution of this file is permitted under the terms of the GNU 
+ * Public License (GPL)
+ * 
+ * These are the UART port assignments, expressed as offsets from the base
+ * register.  These assignments should hold for any serial port based on
+ * a 8250, 16450, or 16550(A).
+ */
+
+#ifndef _LINUX_SERIAL_REG_H
+#define _LINUX_SERIAL_REG_H
+
+/*
+ * DLAB=0
+ */
+#define UART_RX		0	/* In:  Receive buffer */
+#define UART_TX		0	/* Out: Transmit buffer */
+
+#define UART_IER	1	/* Out: Interrupt Enable Register */
+#define UART_IER_MSI		0x08 /* Enable Modem status interrupt */
+#define UART_IER_RLSI		0x04 /* Enable receiver line status interrupt */
+#define UART_IER_THRI		0x02 /* Enable Transmitter holding register int. */
+#define UART_IER_RDI		0x01 /* Enable receiver data interrupt */
+/*
+ * Sleep mode for ST16650 and TI16750.  For the ST16650, EFR[4]=1
+ */
+#define UART_IERX_SLEEP		0x10 /* Enable sleep mode */
+
+#define UART_IIR	2	/* In:  Interrupt ID Register */
+#define UART_IIR_NO_INT		0x01 /* No interrupts pending */
+#define UART_IIR_ID		0x06 /* Mask for the interrupt ID */
+#define UART_IIR_MSI		0x00 /* Modem status interrupt */
+#define UART_IIR_THRI		0x02 /* Transmitter holding register empty */
+#define UART_IIR_RDI		0x04 /* Receiver data interrupt */
+#define UART_IIR_RLSI		0x06 /* Receiver line status interrupt */
+
+#define UART_IIR_BUSY		0x07 /* DesignWare APB Busy Detect */
+
+#define UART_FCR	2	/* Out: FIFO Control Register */
+#define UART_FCR_ENABLE_FIFO	0x01 /* Enable the FIFO */
+#define UART_FCR_CLEAR_RCVR	0x02 /* Clear the RCVR FIFO */
+#define UART_FCR_CLEAR_XMIT	0x04 /* Clear the XMIT FIFO */
+#define UART_FCR_DMA_SELECT	0x08 /* For DMA applications */
+/*
+ * Note: The FIFO trigger levels are chip specific:
+ *	RX:76 = 00  01  10  11	TX:54 = 00  01  10  11
+ * PC16550D:	 1   4   8  14		xx  xx  xx  xx
+ * TI16C550A:	 1   4   8  14          xx  xx  xx  xx
+ * TI16C550C:	 1   4   8  14          xx  xx  xx  xx
+ * ST16C550:	 1   4   8  14		xx  xx  xx  xx
+ * ST16C650:	 8  16  24  28		16   8  24  30	PORT_16650V2
+ * NS16C552:	 1   4   8  14		xx  xx  xx  xx
+ * ST16C654:	 8  16  56  60		 8  16  32  56	PORT_16654
+ * TI16C750:	 1  16  32  56		xx  xx  xx  xx	PORT_16750
+ * TI16C752:	 8  16  56  60		 8  16  32  56
+ * Tegra:	 1   4   8  14		16   8   4   1	PORT_TEGRA
+ */
+#define UART_FCR_R_TRIG_00	0x00
+#define UART_FCR_R_TRIG_01	0x40
+#define UART_FCR_R_TRIG_10	0x80
+#define UART_FCR_R_TRIG_11	0xc0
+#define UART_FCR_T_TRIG_00	0x00
+#define UART_FCR_T_TRIG_01	0x10
+#define UART_FCR_T_TRIG_10	0x20
+#define UART_FCR_T_TRIG_11	0x30
+
+#define UART_FCR_TRIGGER_MASK	0xC0 /* Mask for the FIFO trigger range */
+#define UART_FCR_TRIGGER_1	0x00 /* Mask for trigger set at 1 */
+#define UART_FCR_TRIGGER_4	0x40 /* Mask for trigger set at 4 */
+#define UART_FCR_TRIGGER_8	0x80 /* Mask for trigger set at 8 */
+#define UART_FCR_TRIGGER_14	0xC0 /* Mask for trigger set at 14 */
+/* 16650 definitions */
+#define UART_FCR6_R_TRIGGER_8	0x00 /* Mask for receive trigger set at 1 */
+#define UART_FCR6_R_TRIGGER_16	0x40 /* Mask for receive trigger set at 4 */
+#define UART_FCR6_R_TRIGGER_24  0x80 /* Mask for receive trigger set at 8 */
+#define UART_FCR6_R_TRIGGER_28	0xC0 /* Mask for receive trigger set at 14 */
+#define UART_FCR6_T_TRIGGER_16	0x00 /* Mask for transmit trigger set at 16 */
+#define UART_FCR6_T_TRIGGER_8	0x10 /* Mask for transmit trigger set at 8 */
+#define UART_FCR6_T_TRIGGER_24  0x20 /* Mask for transmit trigger set at 24 */
+#define UART_FCR6_T_TRIGGER_30	0x30 /* Mask for transmit trigger set at 30 */
+#define UART_FCR7_64BYTE	0x20 /* Go into 64 byte mode (TI16C750) */
+
+#define UART_LCR	3	/* Out: Line Control Register */
+/*
+ * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting 
+ * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
+ */
+#define UART_LCR_DLAB		0x80 /* Divisor latch access bit */
+#define UART_LCR_SBC		0x40 /* Set break control */
+#define UART_LCR_SPAR		0x20 /* Stick parity (?) */
+#define UART_LCR_EPAR		0x10 /* Even parity select */
+#define UART_LCR_PARITY		0x08 /* Parity Enable */
+#define UART_LCR_STOP		0x04 /* Stop bits: 0=1 bit, 1=2 bits */
+#define UART_LCR_WLEN5		0x00 /* Wordlength: 5 bits */
+#define UART_LCR_WLEN6		0x01 /* Wordlength: 6 bits */
+#define UART_LCR_WLEN7		0x02 /* Wordlength: 7 bits */
+#define UART_LCR_WLEN8		0x03 /* Wordlength: 8 bits */
+
+/*
+ * Access to some registers depends on register access / configuration
+ * mode.
+ */
+#define UART_LCR_CONF_MODE_A	UART_LCR_DLAB	/* Configutation mode A */
+#define UART_LCR_CONF_MODE_B	0xBF		/* Configutation mode B */
+
+#define UART_MCR	4	/* Out: Modem Control Register */
+#define UART_MCR_CLKSEL		0x80 /* Divide clock by 4 (TI16C752, EFR[4]=1) */
+#define UART_MCR_TCRTLR		0x40 /* Access TCR/TLR (TI16C752, EFR[4]=1) */
+#define UART_MCR_XONANY		0x20 /* Enable Xon Any (TI16C752, EFR[4]=1) */
+#define UART_MCR_AFE		0x20 /* Enable auto-RTS/CTS (TI16C550C/TI16C750) */
+#define UART_MCR_LOOP		0x10 /* Enable loopback test mode */
+#define UART_MCR_OUT2		0x08 /* Out2 complement */
+#define UART_MCR_OUT1		0x04 /* Out1 complement */
+#define UART_MCR_RTS		0x02 /* RTS complement */
+#define UART_MCR_DTR		0x01 /* DTR complement */
+
+#define UART_LSR	5	/* In:  Line Status Register */
+#define UART_LSR_FIFOE		0x80 /* Fifo error */
+#define UART_LSR_TEMT		0x40 /* Transmitter empty */
+#define UART_LSR_THRE		0x20 /* Transmit-hold-register empty */
+#define UART_LSR_BI		0x10 /* Break interrupt indicator */
+#define UART_LSR_FE		0x08 /* Frame error indicator */
+#define UART_LSR_PE		0x04 /* Parity error indicator */
+#define UART_LSR_OE		0x02 /* Overrun error indicator */
+#define UART_LSR_DR		0x01 /* Receiver data ready */
+#define UART_LSR_BRK_ERROR_BITS	0x1E /* BI, FE, PE, OE bits */
+
+#define UART_MSR	6	/* In:  Modem Status Register */
+#define UART_MSR_DCD		0x80 /* Data Carrier Detect */
+#define UART_MSR_RI		0x40 /* Ring Indicator */
+#define UART_MSR_DSR		0x20 /* Data Set Ready */
+#define UART_MSR_CTS		0x10 /* Clear to Send */
+#define UART_MSR_DDCD		0x08 /* Delta DCD */
+#define UART_MSR_TERI		0x04 /* Trailing edge ring indicator */
+#define UART_MSR_DDSR		0x02 /* Delta DSR */
+#define UART_MSR_DCTS		0x01 /* Delta CTS */
+#define UART_MSR_ANY_DELTA	0x0F /* Any of the delta bits! */
+
+#define UART_SCR	7	/* I/O: Scratch Register */
+
+/*
+ * DLAB=1
+ */
+#define UART_DLL	0	/* Out: Divisor Latch Low */
+#define UART_DLM	1	/* Out: Divisor Latch High */
+
+/*
+ * LCR=0xBF (or DLAB=1 for 16C660)
+ */
+#define UART_EFR	2	/* I/O: Extended Features Register */
+#define UART_XR_EFR	9	/* I/O: Extended Features Register (XR17D15x) */
+#define UART_EFR_CTS		0x80 /* CTS flow control */
+#define UART_EFR_RTS		0x40 /* RTS flow control */
+#define UART_EFR_SCD		0x20 /* Special character detect */
+#define UART_EFR_ECB		0x10 /* Enhanced control bit */
+/*
+ * the low four bits control software flow control
+ */
+
+/*
+ * LCR=0xBF, TI16C752, ST16650, ST16650A, ST16654
+ */
+#define UART_XON1	4	/* I/O: Xon character 1 */
+#define UART_XON2	5	/* I/O: Xon character 2 */
+#define UART_XOFF1	6	/* I/O: Xoff character 1 */
+#define UART_XOFF2	7	/* I/O: Xoff character 2 */
+
+/*
+ * EFR[4]=1 MCR[6]=1, TI16C752
+ */
+#define UART_TI752_TCR	6	/* I/O: transmission control register */
+#define UART_TI752_TLR	7	/* I/O: trigger level register */
+
+/*
+ * LCR=0xBF, XR16C85x
+ */
+#define UART_TRG	0	/* FCTR bit 7 selects Rx or Tx
+				 * In: Fifo count
+				 * Out: Fifo custom trigger levels */
+/*
+ * These are the definitions for the Programmable Trigger Register
+ */
+#define UART_TRG_1		0x01
+#define UART_TRG_4		0x04
+#define UART_TRG_8		0x08
+#define UART_TRG_16		0x10
+#define UART_TRG_32		0x20
+#define UART_TRG_64		0x40
+#define UART_TRG_96		0x60
+#define UART_TRG_120		0x78
+#define UART_TRG_128		0x80
+
+#define UART_FCTR	1	/* Feature Control Register */
+#define UART_FCTR_RTS_NODELAY	0x00  /* RTS flow control delay */
+#define UART_FCTR_RTS_4DELAY	0x01
+#define UART_FCTR_RTS_6DELAY	0x02
+#define UART_FCTR_RTS_8DELAY	0x03
+#define UART_FCTR_IRDA		0x04  /* IrDa data encode select */
+#define UART_FCTR_TX_INT	0x08  /* Tx interrupt type select */
+#define UART_FCTR_TRGA		0x00  /* Tx/Rx 550 trigger table select */
+#define UART_FCTR_TRGB		0x10  /* Tx/Rx 650 trigger table select */
+#define UART_FCTR_TRGC		0x20  /* Tx/Rx 654 trigger table select */
+#define UART_FCTR_TRGD		0x30  /* Tx/Rx 850 programmable trigger select */
+#define UART_FCTR_SCR_SWAP	0x40  /* Scratch pad register swap */
+#define UART_FCTR_RX		0x00  /* Programmable trigger mode select */
+#define UART_FCTR_TX		0x80  /* Programmable trigger mode select */
+
+/*
+ * LCR=0xBF, FCTR[6]=1
+ */
+#define UART_EMSR	7	/* Extended Mode Select Register */
+#define UART_EMSR_FIFO_COUNT	0x01  /* Rx/Tx select */
+#define UART_EMSR_ALT_COUNT	0x02  /* Alternating count select */
+
+/*
+ * The Intel XScale on-chip UARTs define these bits
+ */
+#define UART_IER_DMAE	0x80	/* DMA Requests Enable */
+#define UART_IER_UUE	0x40	/* UART Unit Enable */
+#define UART_IER_NRZE	0x20	/* NRZ coding Enable */
+#define UART_IER_RTOIE	0x10	/* Receiver Time Out Interrupt Enable */
+
+#define UART_IIR_TOD	0x08	/* Character Timeout Indication Detected */
+
+#define UART_FCR_PXAR1	0x00	/* receive FIFO threshold = 1 */
+#define UART_FCR_PXAR8	0x40	/* receive FIFO threshold = 8 */
+#define UART_FCR_PXAR16	0x80	/* receive FIFO threshold = 16 */
+#define UART_FCR_PXAR32	0xc0	/* receive FIFO threshold = 32 */
+
+/*
+ * Intel MID on-chip HSU (High Speed UART) defined bits
+ */
+#define UART_FCR_HSU_64_1B	0x00	/* receive FIFO treshold = 1 */
+#define UART_FCR_HSU_64_16B	0x40	/* receive FIFO treshold = 16 */
+#define UART_FCR_HSU_64_32B	0x80	/* receive FIFO treshold = 32 */
+#define UART_FCR_HSU_64_56B	0xc0	/* receive FIFO treshold = 56 */
+
+#define UART_FCR_HSU_16_1B	0x00	/* receive FIFO treshold = 1 */
+#define UART_FCR_HSU_16_4B	0x40	/* receive FIFO treshold = 4 */
+#define UART_FCR_HSU_16_8B	0x80	/* receive FIFO treshold = 8 */
+#define UART_FCR_HSU_16_14B	0xc0	/* receive FIFO treshold = 14 */
+
+#define UART_FCR_HSU_64B_FIFO	0x20	/* chose 64 bytes FIFO */
+#define UART_FCR_HSU_16B_FIFO	0x00	/* chose 16 bytes FIFO */
+
+#define UART_FCR_HALF_EMPT_TXI	0x00	/* trigger TX_EMPT IRQ for half empty */
+#define UART_FCR_FULL_EMPT_TXI	0x08	/* trigger TX_EMPT IRQ for full empty */
+
+/*
+ * These register definitions are for the 16C950
+ */
+#define UART_ASR	0x01	/* Additional Status Register */
+#define UART_RFL	0x03	/* Receiver FIFO level */
+#define UART_TFL 	0x04	/* Transmitter FIFO level */
+#define UART_ICR	0x05	/* Index Control Register */
+
+/* The 16950 ICR registers */
+#define UART_ACR	0x00	/* Additional Control Register */
+#define UART_CPR	0x01	/* Clock Prescalar Register */
+#define UART_TCR	0x02	/* Times Clock Register */
+#define UART_CKS	0x03	/* Clock Select Register */
+#define UART_TTL	0x04	/* Transmitter Interrupt Trigger Level */
+#define UART_RTL	0x05	/* Receiver Interrupt Trigger Level */
+#define UART_FCL	0x06	/* Flow Control Level Lower */
+#define UART_FCH	0x07	/* Flow Control Level Higher */
+#define UART_ID1	0x08	/* ID #1 */
+#define UART_ID2	0x09	/* ID #2 */
+#define UART_ID3	0x0A	/* ID #3 */
+#define UART_REV	0x0B	/* Revision */
+#define UART_CSR	0x0C	/* Channel Software Reset */
+#define UART_NMR	0x0D	/* Nine-bit Mode Register */
+#define UART_CTR	0xFF
+
+/*
+ * The 16C950 Additional Control Register
+ */
+#define UART_ACR_RXDIS	0x01	/* Receiver disable */
+#define UART_ACR_TXDIS	0x02	/* Transmitter disable */
+#define UART_ACR_DSRFC	0x04	/* DSR Flow Control */
+#define UART_ACR_TLENB	0x20	/* 950 trigger levels enable */
+#define UART_ACR_ICRRD	0x40	/* ICR Read enable */
+#define UART_ACR_ASREN	0x80	/* Additional status enable */
+
+
+
+/*
+ * These definitions are for the RSA-DV II/S card, from
+ *
+ * Kiyokazu SUTO <suto@ks-and-ks.ne.jp>
+ */
+
+#define UART_RSA_BASE (-8)
+
+#define UART_RSA_MSR ((UART_RSA_BASE) + 0) /* I/O: Mode Select Register */
+
+#define UART_RSA_MSR_SWAP (1 << 0) /* Swap low/high 8 bytes in I/O port addr */
+#define UART_RSA_MSR_FIFO (1 << 2) /* Enable the external FIFO */
+#define UART_RSA_MSR_FLOW (1 << 3) /* Enable the auto RTS/CTS flow control */
+#define UART_RSA_MSR_ITYP (1 << 4) /* Level (1) / Edge triger (0) */
+
+#define UART_RSA_IER ((UART_RSA_BASE) + 1) /* I/O: Interrupt Enable Register */
+
+#define UART_RSA_IER_Rx_FIFO_H (1 << 0) /* Enable Rx FIFO half full int. */
+#define UART_RSA_IER_Tx_FIFO_H (1 << 1) /* Enable Tx FIFO half full int. */
+#define UART_RSA_IER_Tx_FIFO_E (1 << 2) /* Enable Tx FIFO empty int. */
+#define UART_RSA_IER_Rx_TOUT (1 << 3) /* Enable char receive timeout int */
+#define UART_RSA_IER_TIMER (1 << 4) /* Enable timer interrupt */
+
+#define UART_RSA_SRR ((UART_RSA_BASE) + 2) /* IN: Status Read Register */
+
+#define UART_RSA_SRR_Tx_FIFO_NEMP (1 << 0) /* Tx FIFO is not empty (1) */
+#define UART_RSA_SRR_Tx_FIFO_NHFL (1 << 1) /* Tx FIFO is not half full (1) */
+#define UART_RSA_SRR_Tx_FIFO_NFUL (1 << 2) /* Tx FIFO is not full (1) */
+#define UART_RSA_SRR_Rx_FIFO_NEMP (1 << 3) /* Rx FIFO is not empty (1) */
+#define UART_RSA_SRR_Rx_FIFO_NHFL (1 << 4) /* Rx FIFO is not half full (1) */
+#define UART_RSA_SRR_Rx_FIFO_NFUL (1 << 5) /* Rx FIFO is not full (1) */
+#define UART_RSA_SRR_Rx_TOUT (1 << 6) /* Character reception timeout occurred (1) */
+#define UART_RSA_SRR_TIMER (1 << 7) /* Timer interrupt occurred */
+
+#define UART_RSA_FRR ((UART_RSA_BASE) + 2) /* OUT: FIFO Reset Register */
+
+#define UART_RSA_TIVSR ((UART_RSA_BASE) + 3) /* I/O: Timer Interval Value Set Register */
+
+#define UART_RSA_TCR ((UART_RSA_BASE) + 4) /* OUT: Timer Control Register */
+
+#define UART_RSA_TCR_SWITCH (1 << 0) /* Timer on */
+
+/*
+ * The RSA DSV/II board has two fixed clock frequencies.  One is the
+ * standard rate, and the other is 8 times faster.
+ */
+#define SERIAL_RSA_BAUD_BASE (921600)
+#define SERIAL_RSA_BAUD_BASE_LO (SERIAL_RSA_BAUD_BASE / 8)
+
+/*
+ * Extra serial register definitions for the internal UARTs
+ * in TI OMAP processors.
+ */
+#define UART_OMAP_MDR1		0x08	/* Mode definition register */
+#define UART_OMAP_MDR2		0x09	/* Mode definition register 2 */
+#define UART_OMAP_SCR		0x10	/* Supplementary control register */
+#define UART_OMAP_SSR		0x11	/* Supplementary status register */
+#define UART_OMAP_EBLR		0x12	/* BOF length register */
+#define UART_OMAP_OSC_12M_SEL	0x13	/* OMAP1510 12MHz osc select */
+#define UART_OMAP_MVER		0x14	/* Module version register */
+#define UART_OMAP_SYSC		0x15	/* System configuration register */
+#define UART_OMAP_SYSS		0x16	/* System status register */
+#define UART_OMAP_WER		0x17	/* Wake-up enable register */
+
+/*
+ * These are the definitions for the MDR1 register
+ */
+#define UART_OMAP_MDR1_16X_MODE		0x00	/* UART 16x mode */
+#define UART_OMAP_MDR1_SIR_MODE		0x01	/* SIR mode */
+#define UART_OMAP_MDR1_16X_ABAUD_MODE	0x02	/* UART 16x auto-baud */
+#define UART_OMAP_MDR1_13X_MODE		0x03	/* UART 13x mode */
+#define UART_OMAP_MDR1_MIR_MODE		0x04	/* MIR mode */
+#define UART_OMAP_MDR1_FIR_MODE		0x05	/* FIR mode */
+#define UART_OMAP_MDR1_CIR_MODE		0x06	/* CIR mode */
+#define UART_OMAP_MDR1_DISABLE		0x07	/* Disable (default state) */
+
+#endif /* _LINUX_SERIAL_REG_H */
+
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
new file mode 100644
index 00000000..78779074
--- /dev/null
+++ b/include/linux/serial_sci.h
@@ -0,0 +1,161 @@
+#ifndef __LINUX_SERIAL_SCI_H
+#define __LINUX_SERIAL_SCI_H
+
+#include <linux/serial_core.h>
+#include <linux/sh_dma.h>
+
+/*
+ * Generic header for SuperH SCI(F) (used by sh/sh64/h8300 and related parts)
+ */
+
+#define SCIx_NOT_SUPPORTED	(-1)
+
+enum {
+	SCBRR_ALGO_1,		/* ((clk + 16 * bps) / (16 * bps) - 1) */
+	SCBRR_ALGO_2,		/* ((clk + 16 * bps) / (32 * bps) - 1) */
+	SCBRR_ALGO_3,		/* (((clk * 2) + 16 * bps) / (16 * bps) - 1) */
+	SCBRR_ALGO_4,		/* (((clk * 2) + 16 * bps) / (32 * bps) - 1) */
+	SCBRR_ALGO_5,		/* (((clk * 1000 / 32) / bps) - 1) */
+};
+
+#define SCSCR_TIE	(1 << 7)
+#define SCSCR_RIE	(1 << 6)
+#define SCSCR_TE	(1 << 5)
+#define SCSCR_RE	(1 << 4)
+#define SCSCR_REIE	(1 << 3)	/* not supported by all parts */
+#define SCSCR_TOIE	(1 << 2)	/* not supported by all parts */
+#define SCSCR_CKE1	(1 << 1)
+#define SCSCR_CKE0	(1 << 0)
+
+/* SCxSR SCI */
+#define SCI_TDRE  0x80
+#define SCI_RDRF  0x40
+#define SCI_ORER  0x20
+#define SCI_FER   0x10
+#define SCI_PER   0x08
+#define SCI_TEND  0x04
+
+#define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER)
+
+/* SCxSR SCIF */
+#define SCIF_ER    0x0080
+#define SCIF_TEND  0x0040
+#define SCIF_TDFE  0x0020
+#define SCIF_BRK   0x0010
+#define SCIF_FER   0x0008
+#define SCIF_PER   0x0004
+#define SCIF_RDF   0x0002
+#define SCIF_DR    0x0001
+
+#define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK)
+
+/* SCSPTR, optional */
+#define SCSPTR_RTSIO	(1 << 7)
+#define SCSPTR_CTSIO	(1 << 5)
+
+/* Offsets into the sci_port->irqs array */
+enum {
+	SCIx_ERI_IRQ,
+	SCIx_RXI_IRQ,
+	SCIx_TXI_IRQ,
+	SCIx_BRI_IRQ,
+	SCIx_NR_IRQS,
+
+	SCIx_MUX_IRQ = SCIx_NR_IRQS,	/* special case */
+};
+
+/* Offsets into the sci_port->gpios array */
+enum {
+	SCIx_SCK,
+	SCIx_RXD,
+	SCIx_TXD,
+	SCIx_CTS,
+	SCIx_RTS,
+
+	SCIx_NR_FNS,
+};
+
+enum {
+	SCIx_PROBE_REGTYPE,
+
+	SCIx_SCI_REGTYPE,
+	SCIx_IRDA_REGTYPE,
+	SCIx_SCIFA_REGTYPE,
+	SCIx_SCIFB_REGTYPE,
+	SCIx_SH2_SCIF_FIFODATA_REGTYPE,
+	SCIx_SH3_SCIF_REGTYPE,
+	SCIx_SH4_SCIF_REGTYPE,
+	SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
+	SCIx_SH4_SCIF_FIFODATA_REGTYPE,
+	SCIx_SH7705_SCIF_REGTYPE,
+
+	SCIx_NR_REGTYPES,
+};
+
+#define SCIx_IRQ_MUXED(irq)		\
+{					\
+	[SCIx_ERI_IRQ]	= (irq),	\
+	[SCIx_RXI_IRQ]	= (irq),	\
+	[SCIx_TXI_IRQ]	= (irq),	\
+	[SCIx_BRI_IRQ]	= (irq),	\
+}
+
+#define SCIx_IRQ_IS_MUXED(port)			\
+	((port)->cfg->irqs[SCIx_ERI_IRQ] ==	\
+	 (port)->cfg->irqs[SCIx_RXI_IRQ]) ||	\
+	((port)->cfg->irqs[SCIx_ERI_IRQ] &&	\
+	 !(port)->cfg->irqs[SCIx_RXI_IRQ])
+/*
+ * SCI register subset common for all port types.
+ * Not all registers will exist on all parts.
+ */
+enum {
+	SCSMR, SCBRR, SCSCR, SCxSR,
+	SCFCR, SCFDR, SCxTDR, SCxRDR,
+	SCLSR, SCTFDR, SCRFDR, SCSPTR,
+
+	SCIx_NR_REGS,
+};
+
+struct device;
+
+struct plat_sci_port_ops {
+	void (*init_pins)(struct uart_port *, unsigned int cflag);
+};
+
+/*
+ * Port-specific capabilities
+ */
+#define SCIx_HAVE_RTSCTS	(1 << 0)
+
+/*
+ * Platform device specific platform_data struct
+ */
+struct plat_sci_port {
+	unsigned long	mapbase;		/* resource base */
+	unsigned int	irqs[SCIx_NR_IRQS];	/* ERI, RXI, TXI, BRI */
+	unsigned int	gpios[SCIx_NR_FNS];	/* SCK, RXD, TXD, CTS, RTS */
+	unsigned int	type;			/* SCI / SCIF / IRDA */
+	upf_t		flags;			/* UPF_* flags */
+	unsigned long	capabilities;		/* Port features/capabilities */
+
+	unsigned int	scbrr_algo_id;		/* SCBRR calculation algo */
+	unsigned int	scscr;			/* SCSCR initialization */
+
+	/*
+	 * Platform overrides if necessary, defaults otherwise.
+	 */
+	int		overrun_bit;
+	unsigned int	error_mask;
+
+	int		port_reg;
+	unsigned char	regshift;
+	unsigned char	regtype;
+
+	struct plat_sci_port_ops	*ops;
+
+	unsigned int	dma_slave_tx;
+	unsigned int	dma_slave_rx;
+};
+
+#endif /* __LINUX_SERIAL_SCI_H */
diff --git a/include/linux/serio.h b/include/linux/serio.h
new file mode 100644
index 00000000..ca82861b
--- /dev/null
+++ b/include/linux/serio.h
@@ -0,0 +1,206 @@
+#ifndef _SERIO_H
+#define _SERIO_H
+
+/*
+ * Copyright (C) 1999-2002 Vojtech Pavlik
+*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/ioctl.h>
+
+#define SPIOCSTYPE	_IOW('q', 0x01, unsigned long)
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+
+struct serio {
+	void *port_data;
+
+	char name[32];
+	char phys[32];
+
+	bool manual_bind;
+
+	struct serio_device_id id;
+
+	spinlock_t lock;		/* protects critical sections from port's interrupt handler */
+
+	int (*write)(struct serio *, unsigned char);
+	int (*open)(struct serio *);
+	void (*close)(struct serio *);
+	int (*start)(struct serio *);
+	void (*stop)(struct serio *);
+
+	struct serio *parent;
+	struct list_head child_node;	/* Entry in parent->children list */
+	struct list_head children;
+	unsigned int depth;		/* level of nesting in serio hierarchy */
+
+	struct serio_driver *drv;	/* accessed from interrupt, must be protected by serio->lock and serio->sem */
+	struct mutex drv_mutex;		/* protects serio->drv so attributes can pin driver */
+
+	struct device dev;
+
+	struct list_head node;
+};
+#define to_serio_port(d)	container_of(d, struct serio, dev)
+
+struct serio_driver {
+	const char *description;
+
+	const struct serio_device_id *id_table;
+	bool manual_bind;
+
+	void (*write_wakeup)(struct serio *);
+	irqreturn_t (*interrupt)(struct serio *, unsigned char, unsigned int);
+	int  (*connect)(struct serio *, struct serio_driver *drv);
+	int  (*reconnect)(struct serio *);
+	void (*disconnect)(struct serio *);
+	void (*cleanup)(struct serio *);
+
+	struct device_driver driver;
+};
+#define to_serio_driver(d)	container_of(d, struct serio_driver, driver)
+
+int serio_open(struct serio *serio, struct serio_driver *drv);
+void serio_close(struct serio *serio);
+void serio_rescan(struct serio *serio);
+void serio_reconnect(struct serio *serio);
+irqreturn_t serio_interrupt(struct serio *serio, unsigned char data, unsigned int flags);
+
+void __serio_register_port(struct serio *serio, struct module *owner);
+
+/* use a define to avoid include chaining to get THIS_MODULE */
+#define serio_register_port(serio) \
+	__serio_register_port(serio, THIS_MODULE)
+
+void serio_unregister_port(struct serio *serio);
+void serio_unregister_child_port(struct serio *serio);
+
+int __must_check __serio_register_driver(struct serio_driver *drv,
+				struct module *owner, const char *mod_name);
+
+/* use a define to avoid include chaining to get THIS_MODULE & friends */
+#define serio_register_driver(drv) \
+	__serio_register_driver(drv, THIS_MODULE, KBUILD_MODNAME)
+
+void serio_unregister_driver(struct serio_driver *drv);
+
+static inline int serio_write(struct serio *serio, unsigned char data)
+{
+	if (serio->write)
+		return serio->write(serio, data);
+	else
+		return -1;
+}
+
+static inline void serio_drv_write_wakeup(struct serio *serio)
+{
+	if (serio->drv && serio->drv->write_wakeup)
+		serio->drv->write_wakeup(serio);
+}
+
+/*
+ * Use the following functions to manipulate serio's per-port
+ * driver-specific data.
+ */
+static inline void *serio_get_drvdata(struct serio *serio)
+{
+	return dev_get_drvdata(&serio->dev);
+}
+
+static inline void serio_set_drvdata(struct serio *serio, void *data)
+{
+	dev_set_drvdata(&serio->dev, data);
+}
+
+/*
+ * Use the following functions to protect critical sections in
+ * driver code from port's interrupt handler
+ */
+static inline void serio_pause_rx(struct serio *serio)
+{
+	spin_lock_irq(&serio->lock);
+}
+
+static inline void serio_continue_rx(struct serio *serio)
+{
+	spin_unlock_irq(&serio->lock);
+}
+
+#endif
+
+/*
+ * bit masks for use in "interrupt" flags (3rd argument)
+ */
+#define SERIO_TIMEOUT	1
+#define SERIO_PARITY	2
+#define SERIO_FRAME	4
+
+/*
+ * Serio types
+ */
+#define SERIO_XT	0x00
+#define SERIO_8042	0x01
+#define SERIO_RS232	0x02
+#define SERIO_HIL_MLC	0x03
+#define SERIO_PS_PSTHRU	0x05
+#define SERIO_8042_XL	0x06
+
+/*
+ * Serio protocols
+ */
+#define SERIO_UNKNOWN	0x00
+#define SERIO_MSC	0x01
+#define SERIO_SUN	0x02
+#define SERIO_MS	0x03
+#define SERIO_MP	0x04
+#define SERIO_MZ	0x05
+#define SERIO_MZP	0x06
+#define SERIO_MZPP	0x07
+#define SERIO_VSXXXAA	0x08
+#define SERIO_SUNKBD	0x10
+#define SERIO_WARRIOR	0x18
+#define SERIO_SPACEORB	0x19
+#define SERIO_MAGELLAN	0x1a
+#define SERIO_SPACEBALL	0x1b
+#define SERIO_GUNZE	0x1c
+#define SERIO_IFORCE	0x1d
+#define SERIO_STINGER	0x1e
+#define SERIO_NEWTON	0x1f
+#define SERIO_STOWAWAY	0x20
+#define SERIO_H3600	0x21
+#define SERIO_PS2SER	0x22
+#define SERIO_TWIDKBD	0x23
+#define SERIO_TWIDJOY	0x24
+#define SERIO_HIL	0x25
+#define SERIO_SNES232	0x26
+#define SERIO_SEMTECH	0x27
+#define SERIO_LKKBD	0x28
+#define SERIO_ELO	0x29
+#define SERIO_MICROTOUCH	0x30
+#define SERIO_PENMOUNT	0x31
+#define SERIO_TOUCHRIGHT	0x32
+#define SERIO_TOUCHWIN	0x33
+#define SERIO_TAOSEVM	0x34
+#define SERIO_FUJITSU	0x35
+#define SERIO_ZHENHUA	0x36
+#define SERIO_INEXIO	0x37
+#define SERIO_TOUCHIT213	0x38
+#define SERIO_W8001	0x39
+#define SERIO_DYNAPRO	0x3a
+#define SERIO_HAMPSHIRE	0x3b
+#define SERIO_PS2MULT	0x3c
+#define SERIO_TSC40	0x3d
+
+#endif
diff --git a/include/linux/sfi.h b/include/linux/sfi.h
new file mode 100644
index 00000000..fe817918
--- /dev/null
+++ b/include/linux/sfi.h
@@ -0,0 +1,206 @@
+/* sfi.h Simple Firmware Interface */
+
+/*
+
+  This file is provided under a dual BSD/GPLv2 license.  When using or
+  redistributing this file, you may do so under either license.
+
+  GPL LICENSE SUMMARY
+
+  Copyright(c) 2009 Intel Corporation. All rights reserved.
+
+  This program is free software; you can redistribute it and/or modify
+  it under the terms of version 2 of the GNU General Public License as
+  published by the Free Software Foundation.
+
+  This program is distributed in the hope that it will be useful, but
+  WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+  The full GNU General Public License is included in this distribution
+  in the file called LICENSE.GPL.
+
+  BSD LICENSE
+
+  Copyright(c) 2009 Intel Corporation. All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without
+  modification, are permitted provided that the following conditions
+  are met:
+
+    * Redistributions of source code must retain the above copyright
+      notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright
+      notice, this list of conditions and the following disclaimer in
+      the documentation and/or other materials provided with the
+      distribution.
+    * Neither the name of Intel Corporation nor the names of its
+      contributors may be used to endorse or promote products derived
+      from this software without specific prior written permission.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*/
+
+#ifndef _LINUX_SFI_H
+#define _LINUX_SFI_H
+
+/* Table signatures reserved by the SFI specification */
+#define SFI_SIG_SYST		"SYST"
+#define SFI_SIG_FREQ		"FREQ"
+#define SFI_SIG_IDLE		"IDLE"
+#define SFI_SIG_CPUS		"CPUS"
+#define SFI_SIG_MTMR		"MTMR"
+#define SFI_SIG_MRTC		"MRTC"
+#define SFI_SIG_MMAP		"MMAP"
+#define SFI_SIG_APIC		"APIC"
+#define SFI_SIG_XSDT		"XSDT"
+#define SFI_SIG_WAKE		"WAKE"
+#define SFI_SIG_DEVS		"DEVS"
+#define SFI_SIG_GPIO		"GPIO"
+
+#define SFI_SIGNATURE_SIZE	4
+#define SFI_OEM_ID_SIZE		6
+#define SFI_OEM_TABLE_ID_SIZE	8
+
+#define SFI_NAME_LEN		16
+
+#define SFI_SYST_SEARCH_BEGIN		0x000E0000
+#define SFI_SYST_SEARCH_END		0x000FFFFF
+
+#define SFI_GET_NUM_ENTRIES(ptable, entry_type) \
+	((ptable->header.len - sizeof(struct sfi_table_header)) / \
+	(sizeof(entry_type)))
+/*
+ * Table structures must be byte-packed to match the SFI specification,
+ * as they are provided by the BIOS.
+ */
+struct sfi_table_header {
+	char	sig[SFI_SIGNATURE_SIZE];
+	u32	len;
+	u8	rev;
+	u8	csum;
+	char	oem_id[SFI_OEM_ID_SIZE];
+	char	oem_table_id[SFI_OEM_TABLE_ID_SIZE];
+} __packed;
+
+struct sfi_table_simple {
+	struct sfi_table_header		header;
+	u64				pentry[1];
+} __packed;
+
+/* Comply with UEFI spec 2.1 */
+struct sfi_mem_entry {
+	u32	type;
+	u64	phys_start;
+	u64	virt_start;
+	u64	pages;
+	u64	attrib;
+} __packed;
+
+struct sfi_cpu_table_entry {
+	u32	apic_id;
+} __packed;
+
+struct sfi_cstate_table_entry {
+	u32	hint;		/* MWAIT hint */
+	u32	latency;	/* latency in ms */
+} __packed;
+
+struct sfi_apic_table_entry {
+	u64	phys_addr;	/* phy base addr for APIC reg */
+} __packed;
+
+struct sfi_freq_table_entry {
+	u32	freq_mhz;	/* in MHZ */
+	u32	latency;	/* transition latency in ms */
+	u32	ctrl_val;	/* value to write to PERF_CTL */
+} __packed;
+
+struct sfi_wake_table_entry {
+	u64	phys_addr;	/* pointer to where the wake vector locates */
+} __packed;
+
+struct sfi_timer_table_entry {
+	u64	phys_addr;	/* phy base addr for the timer */
+	u32	freq_hz;	/* in HZ */
+	u32	irq;
+} __packed;
+
+struct sfi_rtc_table_entry {
+	u64	phys_addr;	/* phy base addr for the RTC */
+	u32	irq;
+} __packed;
+
+struct sfi_device_table_entry {
+	u8	type;		/* bus type, I2C, SPI or ...*/
+#define SFI_DEV_TYPE_SPI	0
+#define SFI_DEV_TYPE_I2C	1
+#define SFI_DEV_TYPE_UART	2
+#define SFI_DEV_TYPE_HSI	3
+#define SFI_DEV_TYPE_IPC	4
+
+	u8	host_num;	/* attached to host 0, 1...*/
+	u16	addr;
+	u8	irq;
+	u32	max_freq;
+	char	name[SFI_NAME_LEN];
+} __packed;
+
+struct sfi_gpio_table_entry {
+	char	controller_name[SFI_NAME_LEN];
+	u16	pin_no;
+	char	pin_name[SFI_NAME_LEN];
+} __packed;
+
+typedef int (*sfi_table_handler) (struct sfi_table_header *table);
+
+#ifdef CONFIG_SFI
+extern void __init sfi_init(void);
+extern int __init sfi_platform_init(void);
+extern void __init sfi_init_late(void);
+extern int sfi_table_parse(char *signature, char *oem_id, char *oem_table_id,
+				sfi_table_handler handler);
+
+extern int sfi_disabled;
+static inline void disable_sfi(void)
+{
+	sfi_disabled = 1;
+}
+
+#else /* !CONFIG_SFI */
+
+static inline void sfi_init(void)
+{
+}
+
+static inline void sfi_init_late(void)
+{
+}
+
+#define sfi_disabled	0
+
+static inline int sfi_table_parse(char *signature, char *oem_id,
+					char *oem_table_id,
+					sfi_table_handler handler)
+{
+	return -1;
+}
+
+#endif /* !CONFIG_SFI */
+
+#endif /*_LINUX_SFI_H*/
diff --git a/include/linux/sfi_acpi.h b/include/linux/sfi_acpi.h
new file mode 100644
index 00000000..c4a5a8cd
--- /dev/null
+++ b/include/linux/sfi_acpi.h
@@ -0,0 +1,93 @@
+/* sfi.h Simple Firmware Interface */
+
+/*
+
+  This file is provided under a dual BSD/GPLv2 license.  When using or
+  redistributing this file, you may do so under either license.
+
+  GPL LICENSE SUMMARY
+
+  Copyright(c) 2009 Intel Corporation. All rights reserved.
+
+  This program is free software; you can redistribute it and/or modify
+  it under the terms of version 2 of the GNU General Public License as
+  published by the Free Software Foundation.
+
+  This program is distributed in the hope that it will be useful, but
+  WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+  The full GNU General Public License is included in this distribution
+  in the file called LICENSE.GPL.
+
+  BSD LICENSE
+
+  Copyright(c) 2009 Intel Corporation. All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without
+  modification, are permitted provided that the following conditions
+  are met:
+
+    * Redistributions of source code must retain the above copyright
+      notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright
+      notice, this list of conditions and the following disclaimer in
+      the documentation and/or other materials provided with the
+      distribution.
+    * Neither the name of Intel Corporation nor the names of its
+      contributors may be used to endorse or promote products derived
+      from this software without specific prior written permission.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*/
+
+#ifndef _LINUX_SFI_ACPI_H
+#define _LINUX_SFI_ACPI_H
+
+#ifdef CONFIG_SFI
+#include <acpi/acpi.h>		/* struct acpi_table_header */
+
+extern int sfi_acpi_table_parse(char *signature, char *oem_id,
+				char *oem_table_id,
+				int (*handler)(struct acpi_table_header *));
+
+static inline int acpi_sfi_table_parse(char *signature,
+				int (*handler)(struct acpi_table_header *))
+{
+	if (!acpi_table_parse(signature, handler))
+		return 0;
+
+	return sfi_acpi_table_parse(signature, NULL, NULL, handler);
+}
+#else /* !CONFIG_SFI */
+
+static inline int sfi_acpi_table_parse(char *signature, char *oem_id,
+				char *oem_table_id,
+				int (*handler)(struct acpi_table_header *))
+{
+	return -1;
+}
+
+static inline int acpi_sfi_table_parse(char *signature,
+				int (*handler)(struct acpi_table_header *))
+{
+	return acpi_table_parse(signature, handler);
+}
+#endif /* !CONFIG_SFI */
+
+#endif /*_LINUX_SFI_ACPI_H*/
diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h
new file mode 100644
index 00000000..0a9d8f2a
--- /dev/null
+++ b/include/linux/sh_clk.h
@@ -0,0 +1,161 @@
+#ifndef __SH_CLOCK_H
+#define __SH_CLOCK_H
+
+#include <linux/list.h>
+#include <linux/seq_file.h>
+#include <linux/cpufreq.h>
+#include <linux/types.h>
+#include <linux/kref.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+struct clk;
+
+struct clk_mapping {
+	phys_addr_t		phys;
+	void __iomem		*base;
+	unsigned long		len;
+	struct kref		ref;
+};
+
+
+struct sh_clk_ops {
+#ifdef CONFIG_SH_CLK_CPG_LEGACY
+	void (*init)(struct clk *clk);
+#endif
+	int (*enable)(struct clk *clk);
+	void (*disable)(struct clk *clk);
+	unsigned long (*recalc)(struct clk *clk);
+	int (*set_rate)(struct clk *clk, unsigned long rate);
+	int (*set_parent)(struct clk *clk, struct clk *parent);
+	long (*round_rate)(struct clk *clk, unsigned long rate);
+};
+
+struct clk {
+	struct list_head	node;
+	struct clk		*parent;
+	struct clk		**parent_table;	/* list of parents to */
+	unsigned short		parent_num;	/* choose between */
+	unsigned char		src_shift;	/* source clock field in the */
+	unsigned char		src_width;	/* configuration register */
+	struct sh_clk_ops	*ops;
+
+	struct list_head	children;
+	struct list_head	sibling;	/* node for children */
+
+	int			usecount;
+
+	unsigned long		rate;
+	unsigned long		flags;
+
+	void __iomem		*enable_reg;
+	unsigned int		enable_bit;
+	void __iomem		*mapped_reg;
+
+	unsigned long		arch_flags;
+	void			*priv;
+	struct clk_mapping	*mapping;
+	struct cpufreq_frequency_table *freq_table;
+	unsigned int		nr_freqs;
+};
+
+#define CLK_ENABLE_ON_INIT	(1 << 0)
+
+/* drivers/sh/clk.c */
+unsigned long followparent_recalc(struct clk *);
+void recalculate_root_clocks(void);
+void propagate_rate(struct clk *);
+int clk_reparent(struct clk *child, struct clk *parent);
+int clk_register(struct clk *);
+void clk_unregister(struct clk *);
+void clk_enable_init_clocks(void);
+
+struct clk_div_mult_table {
+	unsigned int *divisors;
+	unsigned int nr_divisors;
+	unsigned int *multipliers;
+	unsigned int nr_multipliers;
+};
+
+struct cpufreq_frequency_table;
+void clk_rate_table_build(struct clk *clk,
+			  struct cpufreq_frequency_table *freq_table,
+			  int nr_freqs,
+			  struct clk_div_mult_table *src_table,
+			  unsigned long *bitmap);
+
+long clk_rate_table_round(struct clk *clk,
+			  struct cpufreq_frequency_table *freq_table,
+			  unsigned long rate);
+
+int clk_rate_table_find(struct clk *clk,
+			struct cpufreq_frequency_table *freq_table,
+			unsigned long rate);
+
+long clk_rate_div_range_round(struct clk *clk, unsigned int div_min,
+			      unsigned int div_max, unsigned long rate);
+
+long clk_rate_mult_range_round(struct clk *clk, unsigned int mult_min,
+			       unsigned int mult_max, unsigned long rate);
+
+long clk_round_parent(struct clk *clk, unsigned long target,
+		      unsigned long *best_freq, unsigned long *parent_freq,
+		      unsigned int div_min, unsigned int div_max);
+
+#define SH_CLK_MSTP32(_parent, _enable_reg, _enable_bit, _flags)	\
+{									\
+	.parent		= _parent,					\
+	.enable_reg	= (void __iomem *)_enable_reg,			\
+	.enable_bit	= _enable_bit,					\
+	.flags		= _flags,					\
+}
+
+int sh_clk_mstp32_register(struct clk *clks, int nr);
+
+#define SH_CLK_DIV4(_parent, _reg, _shift, _div_bitmap, _flags)	\
+{								\
+	.parent = _parent,					\
+	.enable_reg = (void __iomem *)_reg,			\
+	.enable_bit = _shift,					\
+	.arch_flags = _div_bitmap,				\
+	.flags = _flags,					\
+}
+
+struct clk_div4_table {
+	struct clk_div_mult_table *div_mult_table;
+	void (*kick)(struct clk *clk);
+};
+
+int sh_clk_div4_register(struct clk *clks, int nr,
+			 struct clk_div4_table *table);
+int sh_clk_div4_enable_register(struct clk *clks, int nr,
+			 struct clk_div4_table *table);
+int sh_clk_div4_reparent_register(struct clk *clks, int nr,
+			 struct clk_div4_table *table);
+
+#define SH_CLK_DIV6_EXT(_reg, _flags, _parents,			\
+			_num_parents, _src_shift, _src_width)	\
+{								\
+	.enable_reg = (void __iomem *)_reg,			\
+	.flags = _flags,					\
+	.parent_table = _parents,				\
+	.parent_num = _num_parents,				\
+	.src_shift = _src_shift,				\
+	.src_width = _src_width,				\
+}
+
+#define SH_CLK_DIV6(_parent, _reg, _flags)			\
+{								\
+	.parent		= _parent,				\
+	.enable_reg	= (void __iomem *)_reg,			\
+	.flags		= _flags,				\
+}
+
+int sh_clk_div6_register(struct clk *clks, int nr);
+int sh_clk_div6_reparent_register(struct clk *clks, int nr);
+
+#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
+#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
+#define CLKDEV_ICK_ID(_cid, _did, _clk) { .con_id = _cid, .dev_id = _did, .clk = _clk }
+
+#endif /* __SH_CLOCK_H */
diff --git a/include/linux/sh_dma.h b/include/linux/sh_dma.h
new file mode 100644
index 00000000..425450b9
--- /dev/null
+++ b/include/linux/sh_dma.h
@@ -0,0 +1,113 @@
+/*
+ * Header for the new SH dmaengine driver
+ *
+ * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef SH_DMA_H
+#define SH_DMA_H
+
+#include <linux/list.h>
+#include <linux/dmaengine.h>
+
+/* Used by slave DMA clients to request DMA to/from a specific peripheral */
+struct sh_dmae_slave {
+	unsigned int			slave_id; /* Set by the platform */
+	struct device			*dma_dev; /* Set by the platform */
+	const struct sh_dmae_slave_config	*config;  /* Set by the driver */
+};
+
+struct sh_dmae_regs {
+	u32 sar; /* SAR / source address */
+	u32 dar; /* DAR / destination address */
+	u32 tcr; /* TCR / transfer count */
+};
+
+struct sh_desc {
+	struct sh_dmae_regs hw;
+	struct list_head node;
+	struct dma_async_tx_descriptor async_tx;
+	enum dma_transfer_direction direction;
+	dma_cookie_t cookie;
+	size_t partial;
+	int chunks;
+	int mark;
+};
+
+struct sh_dmae_slave_config {
+	unsigned int			slave_id;
+	dma_addr_t			addr;
+	u32				chcr;
+	char				mid_rid;
+};
+
+struct sh_dmae_channel {
+	unsigned int	offset;
+	unsigned int	dmars;
+	unsigned int	dmars_bit;
+	unsigned int	chclr_offset;
+};
+
+struct sh_dmae_pdata {
+	const struct sh_dmae_slave_config *slave;
+	int slave_num;
+	const struct sh_dmae_channel *channel;
+	int channel_num;
+	unsigned int ts_low_shift;
+	unsigned int ts_low_mask;
+	unsigned int ts_high_shift;
+	unsigned int ts_high_mask;
+	const unsigned int *ts_shift;
+	int ts_shift_num;
+	u16 dmaor_init;
+	unsigned int chcr_offset;
+	u32 chcr_ie_bit;
+
+	unsigned int dmaor_is_32bit:1;
+	unsigned int needs_tend_set:1;
+	unsigned int no_dmars:1;
+	unsigned int chclr_present:1;
+	unsigned int slave_only:1;
+};
+
+/* DMA register */
+#define SAR	0x00
+#define DAR	0x04
+#define TCR	0x08
+#define CHCR	0x0C
+#define DMAOR	0x40
+
+#define TEND	0x18 /* USB-DMAC */
+
+/* DMAOR definitions */
+#define DMAOR_AE	0x00000004
+#define DMAOR_NMIF	0x00000002
+#define DMAOR_DME	0x00000001
+
+/* Definitions for the SuperH DMAC */
+#define REQ_L	0x00000000
+#define REQ_E	0x00080000
+#define RACK_H	0x00000000
+#define RACK_L	0x00040000
+#define ACK_R	0x00000000
+#define ACK_W	0x00020000
+#define ACK_H	0x00000000
+#define ACK_L	0x00010000
+#define DM_INC	0x00004000
+#define DM_DEC	0x00008000
+#define DM_FIX	0x0000c000
+#define SM_INC	0x00001000
+#define SM_DEC	0x00002000
+#define SM_FIX	0x00003000
+#define RS_IN	0x00000200
+#define RS_OUT	0x00000300
+#define TS_BLK	0x00000040
+#define TM_BUR	0x00000020
+#define CHCR_DE	0x00000001
+#define CHCR_TE	0x00000002
+#define CHCR_IE	0x00000004
+
+#endif
diff --git a/include/linux/sh_eth.h b/include/linux/sh_eth.h
new file mode 100644
index 00000000..b17d765d
--- /dev/null
+++ b/include/linux/sh_eth.h
@@ -0,0 +1,26 @@
+#ifndef __ASM_SH_ETH_H__
+#define __ASM_SH_ETH_H__
+
+#include <linux/phy.h>
+
+enum {EDMAC_LITTLE_ENDIAN, EDMAC_BIG_ENDIAN};
+enum {
+	SH_ETH_REG_GIGABIT,
+	SH_ETH_REG_FAST_SH4,
+	SH_ETH_REG_FAST_SH3_SH2
+};
+
+struct sh_eth_plat_data {
+	int phy;
+	int edmac_endian;
+	int register_type;
+	phy_interface_t phy_interface;
+	void (*set_mdio_gate)(void *addr);
+
+	unsigned char mac_addr[6];
+	unsigned no_ether_link:1;
+	unsigned ether_link_active_low:1;
+	unsigned needs_init:1;
+};
+
+#endif
diff --git a/include/linux/sh_intc.h b/include/linux/sh_intc.h
new file mode 100644
index 00000000..6aed0805
--- /dev/null
+++ b/include/linux/sh_intc.h
@@ -0,0 +1,150 @@
+#ifndef __SH_INTC_H
+#define __SH_INTC_H
+
+#include <linux/ioport.h>
+
+#ifdef CONFIG_SUPERH
+#define INTC_NR_IRQS	512
+#else
+#define INTC_NR_IRQS	1024
+#endif
+
+/*
+ * Convert back and forth between INTEVT and IRQ values.
+ */
+#ifdef CONFIG_CPU_HAS_INTEVT
+#define evt2irq(evt)		(((evt) >> 5) - 16)
+#define irq2evt(irq)		(((irq) + 16) << 5)
+#else
+#define evt2irq(evt)		(evt)
+#define irq2evt(irq)		(irq)
+#endif
+
+typedef unsigned char intc_enum;
+
+struct intc_vect {
+	intc_enum enum_id;
+	unsigned short vect;
+};
+
+#define INTC_VECT(enum_id, vect) { enum_id, vect }
+#define INTC_IRQ(enum_id, irq) INTC_VECT(enum_id, irq2evt(irq))
+
+struct intc_group {
+	intc_enum enum_id;
+	intc_enum enum_ids[32];
+};
+
+#define INTC_GROUP(enum_id, ids...) { enum_id, { ids } }
+
+struct intc_subgroup {
+	unsigned long reg, reg_width;
+	intc_enum parent_id;
+	intc_enum enum_ids[32];
+};
+
+struct intc_mask_reg {
+	unsigned long set_reg, clr_reg, reg_width;
+	intc_enum enum_ids[32];
+#ifdef CONFIG_INTC_BALANCING
+	unsigned long dist_reg;
+#endif
+#ifdef CONFIG_SMP
+	unsigned long smp;
+#endif
+};
+
+struct intc_prio_reg {
+	unsigned long set_reg, clr_reg, reg_width, field_width;
+	intc_enum enum_ids[16];
+#ifdef CONFIG_SMP
+	unsigned long smp;
+#endif
+};
+
+struct intc_sense_reg {
+	unsigned long reg, reg_width, field_width;
+	intc_enum enum_ids[16];
+};
+
+#ifdef CONFIG_INTC_BALANCING
+#define INTC_SMP_BALANCING(reg)	.dist_reg = (reg)
+#else
+#define INTC_SMP_BALANCING(reg)
+#endif
+
+#ifdef CONFIG_SMP
+#define INTC_SMP(stride, nr)	.smp = (stride) | ((nr) << 8)
+#else
+#define INTC_SMP(stride, nr)
+#endif
+
+struct intc_hw_desc {
+	struct intc_vect *vectors;
+	unsigned int nr_vectors;
+	struct intc_group *groups;
+	unsigned int nr_groups;
+	struct intc_mask_reg *mask_regs;
+	unsigned int nr_mask_regs;
+	struct intc_prio_reg *prio_regs;
+	unsigned int nr_prio_regs;
+	struct intc_sense_reg *sense_regs;
+	unsigned int nr_sense_regs;
+	struct intc_mask_reg *ack_regs;
+	unsigned int nr_ack_regs;
+	struct intc_subgroup *subgroups;
+	unsigned int nr_subgroups;
+};
+
+#define _INTC_ARRAY(a) a, __same_type(a, NULL) ? 0 : sizeof(a)/sizeof(*a)
+
+#define INTC_HW_DESC(vectors, groups, mask_regs,	\
+		     prio_regs,	sense_regs, ack_regs)	\
+{							\
+	_INTC_ARRAY(vectors), _INTC_ARRAY(groups),	\
+	_INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs),	\
+	_INTC_ARRAY(sense_regs), _INTC_ARRAY(ack_regs),	\
+}
+
+struct intc_desc {
+	char *name;
+	struct resource *resource;
+	unsigned int num_resources;
+	intc_enum force_enable;
+	intc_enum force_disable;
+	bool skip_syscore_suspend;
+	struct intc_hw_desc hw;
+};
+
+#define DECLARE_INTC_DESC(symbol, chipname, vectors, groups,		\
+	mask_regs, prio_regs, sense_regs)				\
+struct intc_desc symbol __initdata = {					\
+	.name = chipname,						\
+	.hw = INTC_HW_DESC(vectors, groups, mask_regs,			\
+			   prio_regs, sense_regs, NULL),		\
+}
+
+#define DECLARE_INTC_DESC_ACK(symbol, chipname, vectors, groups,	\
+	mask_regs, prio_regs, sense_regs, ack_regs)			\
+struct intc_desc symbol __initdata = {					\
+	.name = chipname,						\
+	.hw = INTC_HW_DESC(vectors, groups, mask_regs,			\
+			   prio_regs, sense_regs, ack_regs),		\
+}
+
+int register_intc_controller(struct intc_desc *desc);
+void reserve_intc_vectors(struct intc_vect *vectors, unsigned int nr_vecs);
+int intc_set_priority(unsigned int irq, unsigned int prio);
+int intc_irq_lookup(const char *chipname, intc_enum enum_id);
+void intc_finalize(void);
+
+#ifdef CONFIG_INTC_USERIMASK
+int register_intc_userimask(unsigned long addr);
+#else
+static inline int register_intc_userimask(unsigned long addr)
+{
+	return 0;
+}
+#endif
+
+#endif /* __SH_INTC_H */
diff --git a/include/linux/sh_pfc.h b/include/linux/sh_pfc.h
new file mode 100644
index 00000000..5c15aed9
--- /dev/null
+++ b/include/linux/sh_pfc.h
@@ -0,0 +1,203 @@
+/*
+ * SuperH Pin Function Controller Support
+ *
+ * Copyright (c) 2008 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __SH_PFC_H
+#define __SH_PFC_H
+
+#include <asm-generic/gpio.h>
+
+typedef unsigned short pinmux_enum_t;
+typedef unsigned short pinmux_flag_t;
+
+#define PINMUX_TYPE_NONE            0
+#define PINMUX_TYPE_FUNCTION        1
+#define PINMUX_TYPE_GPIO            2
+#define PINMUX_TYPE_OUTPUT          3
+#define PINMUX_TYPE_INPUT           4
+#define PINMUX_TYPE_INPUT_PULLUP    5
+#define PINMUX_TYPE_INPUT_PULLDOWN  6
+
+#define PINMUX_FLAG_TYPE            (0x7)
+#define PINMUX_FLAG_WANT_PULLUP     (1 << 3)
+#define PINMUX_FLAG_WANT_PULLDOWN   (1 << 4)
+
+#define PINMUX_FLAG_DBIT_SHIFT      5
+#define PINMUX_FLAG_DBIT            (0x1f << PINMUX_FLAG_DBIT_SHIFT)
+#define PINMUX_FLAG_DREG_SHIFT      10
+#define PINMUX_FLAG_DREG            (0x3f << PINMUX_FLAG_DREG_SHIFT)
+
+struct pinmux_gpio {
+	pinmux_enum_t enum_id;
+	pinmux_flag_t flags;
+};
+
+#define PINMUX_GPIO(gpio, data_or_mark) [gpio] = { data_or_mark }
+#define PINMUX_DATA(data_or_mark, ids...) data_or_mark, ids, 0
+
+struct pinmux_cfg_reg {
+	unsigned long reg, reg_width, field_width;
+	unsigned long *cnt;
+	pinmux_enum_t *enum_ids;
+	unsigned long *var_field_width;
+};
+
+#define PINMUX_CFG_REG(name, r, r_width, f_width) \
+	.reg = r, .reg_width = r_width, .field_width = f_width,		\
+	.cnt = (unsigned long [r_width / f_width]) {}, \
+	.enum_ids = (pinmux_enum_t [(r_width / f_width) * (1 << f_width)])
+
+#define PINMUX_CFG_REG_VAR(name, r, r_width, var_fw0, var_fwn...) \
+	.reg = r, .reg_width = r_width,	\
+	.cnt = (unsigned long [r_width]) {}, \
+	.var_field_width = (unsigned long [r_width]) { var_fw0, var_fwn, 0 }, \
+	.enum_ids = (pinmux_enum_t [])
+
+struct pinmux_data_reg {
+	unsigned long reg, reg_width, reg_shadow;
+	pinmux_enum_t *enum_ids;
+	void __iomem *mapped_reg;
+};
+
+#define PINMUX_DATA_REG(name, r, r_width) \
+	.reg = r, .reg_width = r_width,	\
+	.enum_ids = (pinmux_enum_t [r_width]) \
+
+struct pinmux_irq {
+	int irq;
+	pinmux_enum_t *enum_ids;
+};
+
+#define PINMUX_IRQ(irq_nr, ids...)			   \
+	{ .irq = irq_nr, .enum_ids = (pinmux_enum_t []) { ids, 0 } }	\
+
+struct pinmux_range {
+	pinmux_enum_t begin;
+	pinmux_enum_t end;
+	pinmux_enum_t force;
+};
+
+struct pfc_window {
+	phys_addr_t phys;
+	void __iomem *virt;
+	unsigned long size;
+};
+
+struct pinmux_info {
+	char *name;
+	pinmux_enum_t reserved_id;
+	struct pinmux_range data;
+	struct pinmux_range input;
+	struct pinmux_range input_pd;
+	struct pinmux_range input_pu;
+	struct pinmux_range output;
+	struct pinmux_range mark;
+	struct pinmux_range function;
+
+	unsigned first_gpio, last_gpio;
+
+	struct pinmux_gpio *gpios;
+	struct pinmux_cfg_reg *cfg_regs;
+	struct pinmux_data_reg *data_regs;
+
+	pinmux_enum_t *gpio_data;
+	unsigned int gpio_data_size;
+
+	struct pinmux_irq *gpio_irq;
+	unsigned int gpio_irq_size;
+
+	struct resource *resource;
+	unsigned int num_resources;
+	struct pfc_window *window;
+
+	unsigned long unlock_reg;
+
+	struct gpio_chip chip;
+};
+
+int register_pinmux(struct pinmux_info *pip);
+int unregister_pinmux(struct pinmux_info *pip);
+
+/* helper macro for port */
+#define PORT_1(fn, pfx, sfx) fn(pfx, sfx)
+
+#define PORT_10(fn, pfx, sfx) \
+	PORT_1(fn, pfx##0, sfx), PORT_1(fn, pfx##1, sfx),	\
+	PORT_1(fn, pfx##2, sfx), PORT_1(fn, pfx##3, sfx),	\
+	PORT_1(fn, pfx##4, sfx), PORT_1(fn, pfx##5, sfx),	\
+	PORT_1(fn, pfx##6, sfx), PORT_1(fn, pfx##7, sfx),	\
+	PORT_1(fn, pfx##8, sfx), PORT_1(fn, pfx##9, sfx)
+
+#define PORT_90(fn, pfx, sfx) \
+	PORT_10(fn, pfx##1, sfx), PORT_10(fn, pfx##2, sfx),	\
+	PORT_10(fn, pfx##3, sfx), PORT_10(fn, pfx##4, sfx),	\
+	PORT_10(fn, pfx##5, sfx), PORT_10(fn, pfx##6, sfx),	\
+	PORT_10(fn, pfx##7, sfx), PORT_10(fn, pfx##8, sfx),	\
+	PORT_10(fn, pfx##9, sfx)
+
+#define _PORT_ALL(pfx, sfx) pfx##_##sfx
+#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
+#define PORT_ALL(str)	CPU_ALL_PORT(_PORT_ALL, PORT, str)
+#define GPIO_PORT_ALL()	CPU_ALL_PORT(_GPIO_PORT, , unused)
+#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
+
+/* helper macro for pinmux_enum_t */
+#define PORT_DATA_I(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
+
+#define PORT_DATA_I_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+		    PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_I_PU(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+		    PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_I_PU_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,			\
+		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+#define PORT_DATA_O(nr)		\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
+
+#define PORT_DATA_IO(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT,	\
+		    PORT##nr##_IN)
+
+#define PORT_DATA_IO_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT,	\
+		    PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_IO_PU(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT,	\
+		    PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_IO_PU_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT,	\
+		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+/* helper macro for top 4 bits in PORTnCR */
+#define _PCRH(in, in_pd, in_pu, out)	\
+	0, (out), (in), 0,		\
+	0, 0, 0, 0,			\
+	0, 0, (in_pd), 0,		\
+	0, 0, (in_pu), 0
+
+#define PORTCR(nr, reg)							\
+	{								\
+		PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {		\
+			_PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,		\
+			      PORT##nr##_IN_PU, PORT##nr##_OUT),	\
+				PORT##nr##_FN0, PORT##nr##_FN1,		\
+				PORT##nr##_FN2, PORT##nr##_FN3,		\
+				PORT##nr##_FN4, PORT##nr##_FN5,		\
+				PORT##nr##_FN6, PORT##nr##_FN7 }	\
+	}
+
+#endif /* __SH_PFC_H */
diff --git a/include/linux/sh_timer.h b/include/linux/sh_timer.h
new file mode 100644
index 00000000..4d9dcd13
--- /dev/null
+++ b/include/linux/sh_timer.h
@@ -0,0 +1,12 @@
+#ifndef __SH_TIMER_H__
+#define __SH_TIMER_H__
+
+struct sh_timer_config {
+	char *name;
+	long channel_offset;
+	int timer_bit;
+	unsigned long clockevent_rating;
+	unsigned long clocksource_rating;
+};
+
+#endif /* __SH_TIMER_H__ */
diff --git a/include/linux/sha256.h b/include/linux/sha256.h
new file mode 100644
index 00000000..cf883a2e
--- /dev/null
+++ b/include/linux/sha256.h
@@ -0,0 +1,25 @@
+#ifndef _SHA256_H
+#define _SHA256_H
+
+#ifndef uint8
+#define uint8  unsigned char
+#endif
+
+#ifndef uint32
+#define uint32 unsigned long int
+#endif
+
+typedef struct
+{
+    uint32 total[2];
+    uint32 state[8];
+    uint8 buffer[64];
+}
+sha256_context;
+
+void sha256_starts( sha256_context *ctx );
+void sha256_update( sha256_context *ctx, uint8 *input, uint32 length );
+void sha256_finish( sha256_context *ctx, uint8 digest[32] );
+
+#endif /* sha256.h */
+
diff --git a/include/linux/shm.h b/include/linux/shm.h
new file mode 100644
index 00000000..92808b86
--- /dev/null
+++ b/include/linux/shm.h
@@ -0,0 +1,130 @@
+#ifndef _LINUX_SHM_H_
+#define _LINUX_SHM_H_
+
+#include <linux/ipc.h>
+#include <linux/errno.h>
+#ifdef __KERNEL__
+#include <asm/page.h>
+#else
+#include <unistd.h>
+#endif
+
+/*
+ * SHMMAX, SHMMNI and SHMALL are upper limits are defaults which can
+ * be increased by sysctl
+ */
+
+#define SHMMAX 0x2000000		 /* max shared seg size (bytes) */
+#define SHMMIN 1			 /* min shared seg size (bytes) */
+#define SHMMNI 4096			 /* max num of segs system wide */
+#ifdef __KERNEL__
+#define SHMALL (SHMMAX/PAGE_SIZE*(SHMMNI/16)) /* max shm system wide (pages) */
+#else
+#define SHMALL (SHMMAX/getpagesize()*(SHMMNI/16))
+#endif
+#define SHMSEG SHMMNI			 /* max shared segs per process */
+
+#ifdef __KERNEL__
+#include <asm/shmparam.h>
+#endif
+
+/* Obsolete, used only for backwards compatibility and libc5 compiles */
+struct shmid_ds {
+	struct ipc_perm		shm_perm;	/* operation perms */
+	int			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	__kernel_time_t		shm_ctime;	/* last change time */
+	__kernel_ipc_pid_t	shm_cpid;	/* pid of creator */
+	__kernel_ipc_pid_t	shm_lpid;	/* pid of last operator */
+	unsigned short		shm_nattch;	/* no. of current attaches */
+	unsigned short 		shm_unused;	/* compatibility */
+	void 			*shm_unused2;	/* ditto - used by DIPC */
+	void			*shm_unused3;	/* unused */
+};
+
+/* Include the definition of shmid64_ds and shminfo64 */
+#include <asm/shmbuf.h>
+
+/* permission flag for shmget */
+#define SHM_R		0400	/* or S_IRUGO from <linux/stat.h> */
+#define SHM_W		0200	/* or S_IWUGO from <linux/stat.h> */
+
+/* mode for attach */
+#define	SHM_RDONLY	010000	/* read-only access */
+#define	SHM_RND		020000	/* round attach address to SHMLBA boundary */
+#define	SHM_REMAP	040000	/* take-over region on attach */
+#define	SHM_EXEC	0100000	/* execution access */
+
+/* super user shmctl commands */
+#define SHM_LOCK 	11
+#define SHM_UNLOCK 	12
+
+/* ipcs ctl commands */
+#define SHM_STAT 	13
+#define SHM_INFO 	14
+
+/* Obsolete, used only for backwards compatibility */
+struct	shminfo {
+	int shmmax;
+	int shmmin;
+	int shmmni;
+	int shmseg;
+	int shmall;
+};
+
+struct shm_info {
+	int used_ids;
+	unsigned long shm_tot;	/* total allocated shm */
+	unsigned long shm_rss;	/* total resident shm */
+	unsigned long shm_swp;	/* total swapped shm */
+	unsigned long swap_attempts;
+	unsigned long swap_successes;
+};
+
+#ifdef __KERNEL__
+struct shmid_kernel /* private to the kernel */
+{	
+	struct kern_ipc_perm	shm_perm;
+	struct file *		shm_file;
+	unsigned long		shm_nattch;
+	unsigned long		shm_segsz;
+	time_t			shm_atim;
+	time_t			shm_dtim;
+	time_t			shm_ctim;
+	pid_t			shm_cprid;
+	pid_t			shm_lprid;
+	struct user_struct	*mlock_user;
+
+	/* The task created the shm object.  NULL if the task is dead. */
+	struct task_struct	*shm_creator;
+};
+
+/* shm_mode upper byte flags */
+#define	SHM_DEST	01000	/* segment will be destroyed on last detach */
+#define SHM_LOCKED      02000   /* segment will not be swapped */
+#define SHM_HUGETLB     04000   /* segment will use huge TLB pages */
+#define SHM_NORESERVE   010000  /* don't check for reservations */
+
+#ifdef CONFIG_SYSVIPC
+long do_shmat(int shmid, char __user *shmaddr, int shmflg, unsigned long *addr);
+extern int is_file_shm_hugepages(struct file *file);
+extern void exit_shm(struct task_struct *task);
+#else
+static inline long do_shmat(int shmid, char __user *shmaddr,
+				int shmflg, unsigned long *addr)
+{
+	return -ENOSYS;
+}
+static inline int is_file_shm_hugepages(struct file *file)
+{
+	return 0;
+}
+static inline void exit_shm(struct task_struct *task)
+{
+}
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_SHM_H_ */
diff --git a/include/linux/shmem_fs.h b/include/linux/shmem_fs.h
new file mode 100644
index 00000000..79ab2555
--- /dev/null
+++ b/include/linux/shmem_fs.h
@@ -0,0 +1,64 @@
+#ifndef __SHMEM_FS_H
+#define __SHMEM_FS_H
+
+#include <linux/swap.h>
+#include <linux/mempolicy.h>
+#include <linux/pagemap.h>
+#include <linux/percpu_counter.h>
+
+/* inode in-kernel data */
+
+struct shmem_inode_info {
+	spinlock_t		lock;
+	unsigned long		flags;
+	unsigned long		alloced;	/* data pages alloced to file */
+	union {
+		unsigned long	swapped;	/* subtotal assigned to swap */
+		char		*symlink;	/* unswappable short symlink */
+	};
+	struct shared_policy	policy;		/* NUMA memory alloc policy */
+	struct list_head	swaplist;	/* chain of maybes on swap */
+	struct list_head	xattr_list;	/* list of shmem_xattr */
+	struct inode		vfs_inode;
+};
+
+struct shmem_sb_info {
+	unsigned long max_blocks;   /* How many blocks are allowed */
+	struct percpu_counter used_blocks;  /* How many are allocated */
+	unsigned long max_inodes;   /* How many inodes are allowed */
+	unsigned long free_inodes;  /* How many are left for allocation */
+	spinlock_t stat_lock;	    /* Serialize shmem_sb_info changes */
+	uid_t uid;		    /* Mount uid for root directory */
+	gid_t gid;		    /* Mount gid for root directory */
+	umode_t mode;		    /* Mount mode for root directory */
+	struct mempolicy *mpol;     /* default memory policy for mappings */
+};
+
+static inline struct shmem_inode_info *SHMEM_I(struct inode *inode)
+{
+	return container_of(inode, struct shmem_inode_info, vfs_inode);
+}
+
+/*
+ * Functions in mm/shmem.c called directly from elsewhere:
+ */
+extern int shmem_init(void);
+extern int shmem_fill_super(struct super_block *sb, void *data, int silent);
+extern struct file *shmem_file_setup(const char *name,
+					loff_t size, unsigned long flags);
+extern int shmem_zero_setup(struct vm_area_struct *);
+extern int shmem_lock(struct file *file, int lock, struct user_struct *user);
+extern void shmem_unlock_mapping(struct address_space *mapping);
+extern struct page *shmem_read_mapping_page_gfp(struct address_space *mapping,
+					pgoff_t index, gfp_t gfp_mask);
+extern void shmem_truncate_range(struct inode *inode, loff_t start, loff_t end);
+extern int shmem_unuse(swp_entry_t entry, struct page *page);
+
+static inline struct page *shmem_read_mapping_page(
+				struct address_space *mapping, pgoff_t index)
+{
+	return shmem_read_mapping_page_gfp(mapping, index,
+					mapping_gfp_mask(mapping));
+}
+
+#endif
diff --git a/include/linux/shrinker.h b/include/linux/shrinker.h
new file mode 100644
index 00000000..07ceb97d
--- /dev/null
+++ b/include/linux/shrinker.h
@@ -0,0 +1,43 @@
+#ifndef _LINUX_SHRINKER_H
+#define _LINUX_SHRINKER_H
+
+/*
+ * This struct is used to pass information from page reclaim to the shrinkers.
+ * We consolidate the values for easier extention later.
+ */
+struct shrink_control {
+	gfp_t gfp_mask;
+
+	/* How many slab objects shrinker() should scan and try to reclaim */
+	unsigned long nr_to_scan;
+};
+
+/*
+ * A callback you can register to apply pressure to ageable caches.
+ *
+ * 'sc' is passed shrink_control which includes a count 'nr_to_scan'
+ * and a 'gfpmask'.  It should look through the least-recently-used
+ * 'nr_to_scan' entries and attempt to free them up.  It should return
+ * the number of objects which remain in the cache.  If it returns -1, it means
+ * it cannot do any scanning at this time (eg. there is a risk of deadlock).
+ * The callback must not return -1 if nr_to_scan is zero.
+ *
+ * The 'gfpmask' refers to the allocation we are currently trying to
+ * fulfil.
+ *
+ * Note that 'shrink' will be passed nr_to_scan == 0 when the VM is
+ * querying the cache size, so a fastpath for that case is appropriate.
+ */
+struct shrinker {
+	int (*shrink)(struct shrinker *, struct shrink_control *sc);
+	int seeks;	/* seeks to recreate an obj */
+	long batch;	/* reclaim batch size, 0 = default */
+
+	/* These are for internal use */
+	struct list_head list;
+	atomic_long_t nr_in_batch; /* objs pending delete */
+};
+#define DEFAULT_SEEKS 2 /* A good number if you don't know better. */
+extern void register_shrinker(struct shrinker *);
+extern void unregister_shrinker(struct shrinker *);
+#endif
diff --git a/include/linux/sht15.h b/include/linux/sht15.h
new file mode 100644
index 00000000..f85c7c52
--- /dev/null
+++ b/include/linux/sht15.h
@@ -0,0 +1,34 @@
+/*
+ * sht15.h - support for the SHT15 Temperature and Humidity Sensor
+ *
+ * Copyright (c) 2009 Jonathan Cameron
+ *
+ * Copyright (c) 2007 Wouter Horre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * For further information, see the Documentation/hwmon/sht15 file.
+ */
+
+/**
+ * struct sht15_platform_data - sht15 connectivity info
+ * @gpio_data:		no. of gpio to which bidirectional data line is
+ *			connected.
+ * @gpio_sck:		no. of gpio to which the data clock is connected.
+ * @supply_mv:		supply voltage in mv. Overridden by regulator if
+ *			available.
+ * @checksum:		flag to indicate the checksum should be validated.
+ * @no_otp_reload:	flag to indicate no reload from OTP.
+ * @low_resolution:	flag to indicate the temp/humidity resolution to use.
+ */
+struct sht15_platform_data {
+	int gpio_data;
+	int gpio_sck;
+	int supply_mv;
+	bool checksum;
+	bool no_otp_reload;
+	bool low_resolution;
+};
+
diff --git a/include/linux/signal.h b/include/linux/signal.h
new file mode 100644
index 00000000..7987ce74
--- /dev/null
+++ b/include/linux/signal.h
@@ -0,0 +1,391 @@
+#ifndef _LINUX_SIGNAL_H
+#define _LINUX_SIGNAL_H
+
+#include <asm/signal.h>
+#include <asm/siginfo.h>
+
+#ifdef __KERNEL__
+#include <linux/list.h>
+
+struct task_struct;
+
+/* for sysctl */
+extern int print_fatal_signals;
+/*
+ * Real Time signals may be queued.
+ */
+
+struct sigqueue {
+	struct list_head list;
+	int flags;
+	siginfo_t info;
+	struct user_struct *user;
+};
+
+/* flags values. */
+#define SIGQUEUE_PREALLOC	1
+
+struct sigpending {
+	struct list_head list;
+	sigset_t signal;
+};
+
+/*
+ * Define some primitives to manipulate sigset_t.
+ */
+
+#ifndef __HAVE_ARCH_SIG_BITOPS
+#include <linux/bitops.h>
+
+/* We don't use <linux/bitops.h> for these because there is no need to
+   be atomic.  */
+static inline void sigaddset(sigset_t *set, int _sig)
+{
+	unsigned long sig = _sig - 1;
+	if (_NSIG_WORDS == 1)
+		set->sig[0] |= 1UL << sig;
+	else
+		set->sig[sig / _NSIG_BPW] |= 1UL << (sig % _NSIG_BPW);
+}
+
+static inline void sigdelset(sigset_t *set, int _sig)
+{
+	unsigned long sig = _sig - 1;
+	if (_NSIG_WORDS == 1)
+		set->sig[0] &= ~(1UL << sig);
+	else
+		set->sig[sig / _NSIG_BPW] &= ~(1UL << (sig % _NSIG_BPW));
+}
+
+static inline int sigismember(sigset_t *set, int _sig)
+{
+	unsigned long sig = _sig - 1;
+	if (_NSIG_WORDS == 1)
+		return 1 & (set->sig[0] >> sig);
+	else
+		return 1 & (set->sig[sig / _NSIG_BPW] >> (sig % _NSIG_BPW));
+}
+
+static inline int sigfindinword(unsigned long word)
+{
+	return ffz(~word);
+}
+
+#endif /* __HAVE_ARCH_SIG_BITOPS */
+
+static inline int sigisemptyset(sigset_t *set)
+{
+	extern void _NSIG_WORDS_is_unsupported_size(void);
+	switch (_NSIG_WORDS) {
+	case 4:
+		return (set->sig[3] | set->sig[2] |
+			set->sig[1] | set->sig[0]) == 0;
+	case 2:
+		return (set->sig[1] | set->sig[0]) == 0;
+	case 1:
+		return set->sig[0] == 0;
+	default:
+		_NSIG_WORDS_is_unsupported_size();
+		return 0;
+	}
+}
+
+#define sigmask(sig)	(1UL << ((sig) - 1))
+
+#ifndef __HAVE_ARCH_SIG_SETOPS
+#include <linux/string.h>
+
+#define _SIG_SET_BINOP(name, op)					\
+static inline void name(sigset_t *r, const sigset_t *a, const sigset_t *b) \
+{									\
+	extern void _NSIG_WORDS_is_unsupported_size(void);		\
+	unsigned long a0, a1, a2, a3, b0, b1, b2, b3;			\
+									\
+	switch (_NSIG_WORDS) {						\
+	    case 4:							\
+		a3 = a->sig[3]; a2 = a->sig[2];				\
+		b3 = b->sig[3]; b2 = b->sig[2];				\
+		r->sig[3] = op(a3, b3);					\
+		r->sig[2] = op(a2, b2);					\
+	    case 2:							\
+		a1 = a->sig[1]; b1 = b->sig[1];				\
+		r->sig[1] = op(a1, b1);					\
+	    case 1:							\
+		a0 = a->sig[0]; b0 = b->sig[0];				\
+		r->sig[0] = op(a0, b0);					\
+		break;							\
+	    default:							\
+		_NSIG_WORDS_is_unsupported_size();			\
+	}								\
+}
+
+#define _sig_or(x,y)	((x) | (y))
+_SIG_SET_BINOP(sigorsets, _sig_or)
+
+#define _sig_and(x,y)	((x) & (y))
+_SIG_SET_BINOP(sigandsets, _sig_and)
+
+#define _sig_andn(x,y)	((x) & ~(y))
+_SIG_SET_BINOP(sigandnsets, _sig_andn)
+
+#undef _SIG_SET_BINOP
+#undef _sig_or
+#undef _sig_and
+#undef _sig_andn
+
+#define _SIG_SET_OP(name, op)						\
+static inline void name(sigset_t *set)					\
+{									\
+	extern void _NSIG_WORDS_is_unsupported_size(void);		\
+									\
+	switch (_NSIG_WORDS) {						\
+	    case 4: set->sig[3] = op(set->sig[3]);			\
+		    set->sig[2] = op(set->sig[2]);			\
+	    case 2: set->sig[1] = op(set->sig[1]);			\
+	    case 1: set->sig[0] = op(set->sig[0]);			\
+		    break;						\
+	    default:							\
+		_NSIG_WORDS_is_unsupported_size();			\
+	}								\
+}
+
+#define _sig_not(x)	(~(x))
+_SIG_SET_OP(signotset, _sig_not)
+
+#undef _SIG_SET_OP
+#undef _sig_not
+
+static inline void sigemptyset(sigset_t *set)
+{
+	switch (_NSIG_WORDS) {
+	default:
+		memset(set, 0, sizeof(sigset_t));
+		break;
+	case 2: set->sig[1] = 0;
+	case 1:	set->sig[0] = 0;
+		break;
+	}
+}
+
+static inline void sigfillset(sigset_t *set)
+{
+	switch (_NSIG_WORDS) {
+	default:
+		memset(set, -1, sizeof(sigset_t));
+		break;
+	case 2: set->sig[1] = -1;
+	case 1:	set->sig[0] = -1;
+		break;
+	}
+}
+
+/* Some extensions for manipulating the low 32 signals in particular.  */
+
+static inline void sigaddsetmask(sigset_t *set, unsigned long mask)
+{
+	set->sig[0] |= mask;
+}
+
+static inline void sigdelsetmask(sigset_t *set, unsigned long mask)
+{
+	set->sig[0] &= ~mask;
+}
+
+static inline int sigtestsetmask(sigset_t *set, unsigned long mask)
+{
+	return (set->sig[0] & mask) != 0;
+}
+
+static inline void siginitset(sigset_t *set, unsigned long mask)
+{
+	set->sig[0] = mask;
+	switch (_NSIG_WORDS) {
+	default:
+		memset(&set->sig[1], 0, sizeof(long)*(_NSIG_WORDS-1));
+		break;
+	case 2: set->sig[1] = 0;
+	case 1: ;
+	}
+}
+
+static inline void siginitsetinv(sigset_t *set, unsigned long mask)
+{
+	set->sig[0] = ~mask;
+	switch (_NSIG_WORDS) {
+	default:
+		memset(&set->sig[1], -1, sizeof(long)*(_NSIG_WORDS-1));
+		break;
+	case 2: set->sig[1] = -1;
+	case 1: ;
+	}
+}
+
+#endif /* __HAVE_ARCH_SIG_SETOPS */
+
+static inline void init_sigpending(struct sigpending *sig)
+{
+	sigemptyset(&sig->signal);
+	INIT_LIST_HEAD(&sig->list);
+}
+
+extern void flush_sigqueue(struct sigpending *queue);
+
+/* Test if 'sig' is valid signal. Use this instead of testing _NSIG directly */
+static inline int valid_signal(unsigned long sig)
+{
+	return sig <= _NSIG ? 1 : 0;
+}
+
+struct timespec;
+struct pt_regs;
+
+extern int next_signal(struct sigpending *pending, sigset_t *mask);
+extern int do_send_sig_info(int sig, struct siginfo *info,
+				struct task_struct *p, bool group);
+extern int group_send_sig_info(int sig, struct siginfo *info, struct task_struct *p);
+extern int __group_send_sig_info(int, struct siginfo *, struct task_struct *);
+extern long do_rt_tgsigqueueinfo(pid_t tgid, pid_t pid, int sig,
+				 siginfo_t *info);
+extern long do_sigpending(void __user *, unsigned long);
+extern int do_sigtimedwait(const sigset_t *, siginfo_t *,
+				const struct timespec *);
+extern int sigprocmask(int, sigset_t *, sigset_t *);
+extern void set_current_blocked(const sigset_t *);
+extern int show_unhandled_signals;
+
+extern int get_signal_to_deliver(siginfo_t *info, struct k_sigaction *return_ka, struct pt_regs *regs, void *cookie);
+extern void block_sigmask(struct k_sigaction *ka, int signr);
+extern void exit_signals(struct task_struct *tsk);
+
+extern struct kmem_cache *sighand_cachep;
+
+int unhandled_signal(struct task_struct *tsk, int sig);
+
+/*
+ * In POSIX a signal is sent either to a specific thread (Linux task)
+ * or to the process as a whole (Linux thread group).  How the signal
+ * is sent determines whether it's to one thread or the whole group,
+ * which determines which signal mask(s) are involved in blocking it
+ * from being delivered until later.  When the signal is delivered,
+ * either it's caught or ignored by a user handler or it has a default
+ * effect that applies to the whole thread group (POSIX process).
+ *
+ * The possible effects an unblocked signal set to SIG_DFL can have are:
+ *   ignore	- Nothing Happens
+ *   terminate	- kill the process, i.e. all threads in the group,
+ * 		  similar to exit_group.  The group leader (only) reports
+ *		  WIFSIGNALED status to its parent.
+ *   coredump	- write a core dump file describing all threads using
+ *		  the same mm and then kill all those threads
+ *   stop 	- stop all the threads in the group, i.e. TASK_STOPPED state
+ *
+ * SIGKILL and SIGSTOP cannot be caught, blocked, or ignored.
+ * Other signals when not blocked and set to SIG_DFL behaves as follows.
+ * The job control signals also have other special effects.
+ *
+ *	+--------------------+------------------+
+ *	|  POSIX signal      |  default action  |
+ *	+--------------------+------------------+
+ *	|  SIGHUP            |  terminate	|
+ *	|  SIGINT            |	terminate	|
+ *	|  SIGQUIT           |	coredump 	|
+ *	|  SIGILL            |	coredump 	|
+ *	|  SIGTRAP           |	coredump 	|
+ *	|  SIGABRT/SIGIOT    |	coredump 	|
+ *	|  SIGBUS            |	coredump 	|
+ *	|  SIGFPE            |	coredump 	|
+ *	|  SIGKILL           |	terminate(+)	|
+ *	|  SIGUSR1           |	terminate	|
+ *	|  SIGSEGV           |	coredump 	|
+ *	|  SIGUSR2           |	terminate	|
+ *	|  SIGPIPE           |	terminate	|
+ *	|  SIGALRM           |	terminate	|
+ *	|  SIGTERM           |	terminate	|
+ *	|  SIGCHLD           |	ignore   	|
+ *	|  SIGCONT           |	ignore(*)	|
+ *	|  SIGSTOP           |	stop(*)(+)  	|
+ *	|  SIGTSTP           |	stop(*)  	|
+ *	|  SIGTTIN           |	stop(*)  	|
+ *	|  SIGTTOU           |	stop(*)  	|
+ *	|  SIGURG            |	ignore   	|
+ *	|  SIGXCPU           |	coredump 	|
+ *	|  SIGXFSZ           |	coredump 	|
+ *	|  SIGVTALRM         |	terminate	|
+ *	|  SIGPROF           |	terminate	|
+ *	|  SIGPOLL/SIGIO     |	terminate	|
+ *	|  SIGSYS/SIGUNUSED  |	coredump 	|
+ *	|  SIGSTKFLT         |	terminate	|
+ *	|  SIGWINCH          |	ignore   	|
+ *	|  SIGPWR            |	terminate	|
+ *	|  SIGRTMIN-SIGRTMAX |	terminate       |
+ *	+--------------------+------------------+
+ *	|  non-POSIX signal  |  default action  |
+ *	+--------------------+------------------+
+ *	|  SIGEMT            |  coredump	|
+ *	+--------------------+------------------+
+ *
+ * (+) For SIGKILL and SIGSTOP the action is "always", not just "default".
+ * (*) Special job control effects:
+ * When SIGCONT is sent, it resumes the process (all threads in the group)
+ * from TASK_STOPPED state and also clears any pending/queued stop signals
+ * (any of those marked with "stop(*)").  This happens regardless of blocking,
+ * catching, or ignoring SIGCONT.  When any stop signal is sent, it clears
+ * any pending/queued SIGCONT signals; this happens regardless of blocking,
+ * catching, or ignored the stop signal, though (except for SIGSTOP) the
+ * default action of stopping the process may happen later or never.
+ */
+
+#ifdef SIGEMT
+#define SIGEMT_MASK	rt_sigmask(SIGEMT)
+#else
+#define SIGEMT_MASK	0
+#endif
+
+#if SIGRTMIN > BITS_PER_LONG
+#define rt_sigmask(sig)	(1ULL << ((sig)-1))
+#else
+#define rt_sigmask(sig)	sigmask(sig)
+#endif
+#define siginmask(sig, mask) (rt_sigmask(sig) & (mask))
+
+#define SIG_KERNEL_ONLY_MASK (\
+	rt_sigmask(SIGKILL)   |  rt_sigmask(SIGSTOP))
+
+#define SIG_KERNEL_STOP_MASK (\
+	rt_sigmask(SIGSTOP)   |  rt_sigmask(SIGTSTP)   | \
+	rt_sigmask(SIGTTIN)   |  rt_sigmask(SIGTTOU)   )
+
+#define SIG_KERNEL_COREDUMP_MASK (\
+        rt_sigmask(SIGQUIT)   |  rt_sigmask(SIGILL)    | \
+	rt_sigmask(SIGTRAP)   |  rt_sigmask(SIGABRT)   | \
+        rt_sigmask(SIGFPE)    |  rt_sigmask(SIGSEGV)   | \
+	rt_sigmask(SIGBUS)    |  rt_sigmask(SIGSYS)    | \
+        rt_sigmask(SIGXCPU)   |  rt_sigmask(SIGXFSZ)   | \
+	SIGEMT_MASK				       )
+
+#define SIG_KERNEL_IGNORE_MASK (\
+        rt_sigmask(SIGCONT)   |  rt_sigmask(SIGCHLD)   | \
+	rt_sigmask(SIGWINCH)  |  rt_sigmask(SIGURG)    )
+
+#define sig_kernel_only(sig) \
+	(((sig) < SIGRTMIN) && siginmask(sig, SIG_KERNEL_ONLY_MASK))
+#define sig_kernel_coredump(sig) \
+	(((sig) < SIGRTMIN) && siginmask(sig, SIG_KERNEL_COREDUMP_MASK))
+#define sig_kernel_ignore(sig) \
+	(((sig) < SIGRTMIN) && siginmask(sig, SIG_KERNEL_IGNORE_MASK))
+#define sig_kernel_stop(sig) \
+	(((sig) < SIGRTMIN) && siginmask(sig, SIG_KERNEL_STOP_MASK))
+
+#define sig_user_defined(t, signr) \
+	(((t)->sighand->action[(signr)-1].sa.sa_handler != SIG_DFL) &&	\
+	 ((t)->sighand->action[(signr)-1].sa.sa_handler != SIG_IGN))
+
+#define sig_fatal(t, signr) \
+	(!siginmask(signr, SIG_KERNEL_IGNORE_MASK|SIG_KERNEL_STOP_MASK) && \
+	 (t)->sighand->action[(signr)-1].sa.sa_handler == SIG_DFL)
+
+void signals_init(void);
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_SIGNAL_H */
diff --git a/include/linux/signalfd.h b/include/linux/signalfd.h
new file mode 100644
index 00000000..247399b2
--- /dev/null
+++ b/include/linux/signalfd.h
@@ -0,0 +1,76 @@
+/*
+ *  include/linux/signalfd.h
+ *
+ *  Copyright (C) 2007  Davide Libenzi <davidel@xmailserver.org>
+ *
+ */
+
+#ifndef _LINUX_SIGNALFD_H
+#define _LINUX_SIGNALFD_H
+
+#include <linux/types.h>
+/* For O_CLOEXEC and O_NONBLOCK */
+#include <linux/fcntl.h>
+
+/* Flags for signalfd4.  */
+#define SFD_CLOEXEC O_CLOEXEC
+#define SFD_NONBLOCK O_NONBLOCK
+
+struct signalfd_siginfo {
+	__u32 ssi_signo;
+	__s32 ssi_errno;
+	__s32 ssi_code;
+	__u32 ssi_pid;
+	__u32 ssi_uid;
+	__s32 ssi_fd;
+	__u32 ssi_tid;
+	__u32 ssi_band;
+	__u32 ssi_overrun;
+	__u32 ssi_trapno;
+	__s32 ssi_status;
+	__s32 ssi_int;
+	__u64 ssi_ptr;
+	__u64 ssi_utime;
+	__u64 ssi_stime;
+	__u64 ssi_addr;
+	__u16 ssi_addr_lsb;
+
+	/*
+	 * Pad strcture to 128 bytes. Remember to update the
+	 * pad size when you add new members. We use a fixed
+	 * size structure to avoid compatibility problems with
+	 * future versions, and we leave extra space for additional
+	 * members. We use fixed size members because this strcture
+	 * comes out of a read(2) and we really don't want to have
+	 * a compat on read(2).
+	 */
+	__u8 __pad[46];
+};
+
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_SIGNALFD
+
+/*
+ * Deliver the signal to listening signalfd.
+ */
+static inline void signalfd_notify(struct task_struct *tsk, int sig)
+{
+	if (unlikely(waitqueue_active(&tsk->sighand->signalfd_wqh)))
+		wake_up(&tsk->sighand->signalfd_wqh);
+}
+
+extern void signalfd_cleanup(struct sighand_struct *sighand);
+
+#else /* CONFIG_SIGNALFD */
+
+static inline void signalfd_notify(struct task_struct *tsk, int sig) { }
+
+static inline void signalfd_cleanup(struct sighand_struct *sighand) { }
+
+#endif /* CONFIG_SIGNALFD */
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_SIGNALFD_H */
diff --git a/include/linux/sirfsoc_dma.h b/include/linux/sirfsoc_dma.h
new file mode 100644
index 00000000..29d95933
--- /dev/null
+++ b/include/linux/sirfsoc_dma.h
@@ -0,0 +1,6 @@
+#ifndef _SIRFSOC_DMA_H_
+#define _SIRFSOC_DMA_H_
+
+bool sirfsoc_dma_filter_id(struct dma_chan *chan, void *chan_id);
+
+#endif
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
new file mode 100644
index 00000000..c1bae8df
--- /dev/null
+++ b/include/linux/skbuff.h
@@ -0,0 +1,2559 @@
+/*
+ *	Definitions for the 'struct sk_buff' memory handlers.
+ *
+ *	Authors:
+ *		Alan Cox, <gw4pts@gw4pts.ampr.org>
+ *		Florian La Roche, <rzsfl@rz.uni-sb.de>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_SKBUFF_H
+#define _LINUX_SKBUFF_H
+
+#include <linux/kernel.h>
+#include <linux/kmemcheck.h>
+#include <linux/compiler.h>
+#include <linux/time.h>
+#include <linux/bug.h>
+#include <linux/cache.h>
+
+#include <linux/atomic.h>
+#include <asm/types.h>
+#include <linux/spinlock.h>
+#include <linux/net.h>
+#include <linux/textsearch.h>
+#include <net/checksum.h>
+#include <linux/rcupdate.h>
+#include <linux/dmaengine.h>
+#include <linux/hrtimer.h>
+#include <linux/dma-mapping.h>
+#include <linux/netdev_features.h>
+
+/* Don't change this without changing skb_csum_unnecessary! */
+#define CHECKSUM_NONE 0
+#define CHECKSUM_UNNECESSARY 1
+#define CHECKSUM_COMPLETE 2
+#define CHECKSUM_PARTIAL 3
+
+#define SKB_DATA_ALIGN(X)	(((X) + (SMP_CACHE_BYTES - 1)) & \
+				 ~(SMP_CACHE_BYTES - 1))
+#define SKB_WITH_OVERHEAD(X)	\
+	((X) - SKB_DATA_ALIGN(sizeof(struct skb_shared_info)))
+#define SKB_MAX_ORDER(X, ORDER) \
+	SKB_WITH_OVERHEAD((PAGE_SIZE << (ORDER)) - (X))
+#define SKB_MAX_HEAD(X)		(SKB_MAX_ORDER((X), 0))
+#define SKB_MAX_ALLOC		(SKB_MAX_ORDER(0, 2))
+
+/* return minimum truesize of one skb containing X bytes of data */
+#define SKB_TRUESIZE(X) ((X) +						\
+			 SKB_DATA_ALIGN(sizeof(struct sk_buff)) +	\
+			 SKB_DATA_ALIGN(sizeof(struct skb_shared_info)))
+
+/* A. Checksumming of received packets by device.
+ *
+ *	NONE: device failed to checksum this packet.
+ *		skb->csum is undefined.
+ *
+ *	UNNECESSARY: device parsed packet and wouldbe verified checksum.
+ *		skb->csum is undefined.
+ *	      It is bad option, but, unfortunately, many of vendors do this.
+ *	      Apparently with secret goal to sell you new device, when you
+ *	      will add new protocol to your host. F.e. IPv6. 8)
+ *
+ *	COMPLETE: the most generic way. Device supplied checksum of _all_
+ *	    the packet as seen by netif_rx in skb->csum.
+ *	    NOTE: Even if device supports only some protocols, but
+ *	    is able to produce some skb->csum, it MUST use COMPLETE,
+ *	    not UNNECESSARY.
+ *
+ *	PARTIAL: identical to the case for output below.  This may occur
+ *	    on a packet received directly from another Linux OS, e.g.,
+ *	    a virtualised Linux kernel on the same host.  The packet can
+ *	    be treated in the same way as UNNECESSARY except that on
+ *	    output (i.e., forwarding) the checksum must be filled in
+ *	    by the OS or the hardware.
+ *
+ * B. Checksumming on output.
+ *
+ *	NONE: skb is checksummed by protocol or csum is not required.
+ *
+ *	PARTIAL: device is required to csum packet as seen by hard_start_xmit
+ *	from skb->csum_start to the end and to record the checksum
+ *	at skb->csum_start + skb->csum_offset.
+ *
+ *	Device must show its capabilities in dev->features, set
+ *	at device setup time.
+ *	NETIF_F_HW_CSUM	- it is clever device, it is able to checksum
+ *			  everything.
+ *	NETIF_F_IP_CSUM - device is dumb. It is able to csum only
+ *			  TCP/UDP over IPv4. Sigh. Vendors like this
+ *			  way by an unknown reason. Though, see comment above
+ *			  about CHECKSUM_UNNECESSARY. 8)
+ *	NETIF_F_IPV6_CSUM about as dumb as the last one but does IPv6 instead.
+ *
+ *	UNNECESSARY: device will do per protocol specific csum. Protocol drivers
+ *	that do not want net to perform the checksum calculation should use
+ *	this flag in their outgoing skbs.
+ *	NETIF_F_FCOE_CRC  this indicates the device can do FCoE FC CRC
+ *			  offload. Correspondingly, the FCoE protocol driver
+ *			  stack should use CHECKSUM_UNNECESSARY.
+ *
+ *	Any questions? No questions, good. 		--ANK
+ */
+
+struct net_device;
+struct scatterlist;
+struct pipe_inode_info;
+
+#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
+struct nf_conntrack {
+	atomic_t use;
+};
+#endif
+
+#ifdef CONFIG_BRIDGE_NETFILTER
+struct nf_bridge_info {
+	atomic_t use;
+	struct net_device *physindev;
+	struct net_device *physoutdev;
+	unsigned int mask;
+	unsigned long data[32 / sizeof(unsigned long)];
+};
+#endif
+
+struct sk_buff_head {
+	/* These two members must be first. */
+	struct sk_buff	*next;
+	struct sk_buff	*prev;
+
+	__u32		qlen;
+	spinlock_t	lock;
+};
+
+struct sk_buff;
+
+/* To allow 64K frame to be packed as single skb without frag_list we
+ * require 64K/PAGE_SIZE pages plus 1 additional page to allow for
+ * buffers which do not start on a page boundary.
+ *
+ * Since GRO uses frags we allocate at least 16 regardless of page
+ * size.
+ */
+#if (65536/PAGE_SIZE + 1) < 16
+#define MAX_SKB_FRAGS 16UL
+#else
+#define MAX_SKB_FRAGS (65536/PAGE_SIZE + 1)
+#endif
+
+typedef struct skb_frag_struct skb_frag_t;
+
+struct skb_frag_struct {
+	struct {
+		struct page *p;
+	} page;
+#if (BITS_PER_LONG > 32) || (PAGE_SIZE >= 65536)
+	__u32 page_offset;
+	__u32 size;
+#else
+	__u16 page_offset;
+	__u16 size;
+#endif
+};
+
+static inline unsigned int skb_frag_size(const skb_frag_t *frag)
+{
+	return frag->size;
+}
+
+static inline void skb_frag_size_set(skb_frag_t *frag, unsigned int size)
+{
+	frag->size = size;
+}
+
+static inline void skb_frag_size_add(skb_frag_t *frag, int delta)
+{
+	frag->size += delta;
+}
+
+static inline void skb_frag_size_sub(skb_frag_t *frag, int delta)
+{
+	frag->size -= delta;
+}
+
+#define HAVE_HW_TIME_STAMP
+
+/**
+ * struct skb_shared_hwtstamps - hardware time stamps
+ * @hwtstamp:	hardware time stamp transformed into duration
+ *		since arbitrary point in time
+ * @syststamp:	hwtstamp transformed to system time base
+ *
+ * Software time stamps generated by ktime_get_real() are stored in
+ * skb->tstamp. The relation between the different kinds of time
+ * stamps is as follows:
+ *
+ * syststamp and tstamp can be compared against each other in
+ * arbitrary combinations.  The accuracy of a
+ * syststamp/tstamp/"syststamp from other device" comparison is
+ * limited by the accuracy of the transformation into system time
+ * base. This depends on the device driver and its underlying
+ * hardware.
+ *
+ * hwtstamps can only be compared against other hwtstamps from
+ * the same device.
+ *
+ * This structure is attached to packets as part of the
+ * &skb_shared_info. Use skb_hwtstamps() to get a pointer.
+ */
+struct skb_shared_hwtstamps {
+	ktime_t	hwtstamp;
+	ktime_t	syststamp;
+};
+
+/* Definitions for tx_flags in struct skb_shared_info */
+enum {
+	/* generate hardware time stamp */
+	SKBTX_HW_TSTAMP = 1 << 0,
+
+	/* generate software time stamp */
+	SKBTX_SW_TSTAMP = 1 << 1,
+
+	/* device driver is going to provide hardware time stamp */
+	SKBTX_IN_PROGRESS = 1 << 2,
+
+	/* device driver supports TX zero-copy buffers */
+	SKBTX_DEV_ZEROCOPY = 1 << 3,
+
+	/* generate wifi status information (where possible) */
+	SKBTX_WIFI_STATUS = 1 << 4,
+};
+
+/*
+ * The callback notifies userspace to release buffers when skb DMA is done in
+ * lower device, the skb last reference should be 0 when calling this.
+ * The ctx field is used to track device context.
+ * The desc field is used to track userspace buffer index.
+ */
+struct ubuf_info {
+	void (*callback)(struct ubuf_info *);
+	void *ctx;
+	unsigned long desc;
+};
+
+/* This data is invariant across clones and lives at
+ * the end of the header data, ie. at skb->end.
+ */
+struct skb_shared_info {
+	unsigned char	nr_frags;
+	__u8		tx_flags;
+	unsigned short	gso_size;
+	/* Warning: this field is not always filled in (UFO)! */
+	unsigned short	gso_segs;
+	unsigned short  gso_type;
+	struct sk_buff	*frag_list;
+	struct skb_shared_hwtstamps hwtstamps;
+	__be32          ip6_frag_id;
+
+	/*
+	 * Warning : all fields before dataref are cleared in __alloc_skb()
+	 */
+	atomic_t	dataref;
+
+	/* Intermediate layers must ensure that destructor_arg
+	 * remains valid until skb destructor */
+	void *		destructor_arg;
+
+	/* must be last field, see pskb_expand_head() */
+	skb_frag_t	frags[MAX_SKB_FRAGS];
+};
+
+/* We divide dataref into two halves.  The higher 16 bits hold references
+ * to the payload part of skb->data.  The lower 16 bits hold references to
+ * the entire skb->data.  A clone of a headerless skb holds the length of
+ * the header in skb->hdr_len.
+ *
+ * All users must obey the rule that the skb->data reference count must be
+ * greater than or equal to the payload reference count.
+ *
+ * Holding a reference to the payload part means that the user does not
+ * care about modifications to the header part of skb->data.
+ */
+#define SKB_DATAREF_SHIFT 16
+#define SKB_DATAREF_MASK ((1 << SKB_DATAREF_SHIFT) - 1)
+
+
+enum {
+	SKB_FCLONE_UNAVAILABLE,
+	SKB_FCLONE_ORIG,
+	SKB_FCLONE_CLONE,
+};
+
+enum {
+	SKB_GSO_TCPV4 = 1 << 0,
+	SKB_GSO_UDP = 1 << 1,
+
+	/* This indicates the skb is from an untrusted source. */
+	SKB_GSO_DODGY = 1 << 2,
+
+	/* This indicates the tcp segment has CWR set. */
+	SKB_GSO_TCP_ECN = 1 << 3,
+
+	SKB_GSO_TCPV6 = 1 << 4,
+
+	SKB_GSO_FCOE = 1 << 5,
+};
+
+#if BITS_PER_LONG > 32
+#define NET_SKBUFF_DATA_USES_OFFSET 1
+#endif
+
+#ifdef NET_SKBUFF_DATA_USES_OFFSET
+typedef unsigned int sk_buff_data_t;
+#else
+typedef unsigned char *sk_buff_data_t;
+#endif
+
+#if defined(CONFIG_NF_DEFRAG_IPV4) || defined(CONFIG_NF_DEFRAG_IPV4_MODULE) || \
+    defined(CONFIG_NF_DEFRAG_IPV6) || defined(CONFIG_NF_DEFRAG_IPV6_MODULE)
+#define NET_SKBUFF_NF_DEFRAG_NEEDED 1
+#endif
+
+/** 
+ *	struct sk_buff - socket buffer
+ *	@next: Next buffer in list
+ *	@prev: Previous buffer in list
+ *	@tstamp: Time we arrived
+ *	@sk: Socket we are owned by
+ *	@dev: Device we arrived on/are leaving by
+ *	@cb: Control buffer. Free for use by every layer. Put private vars here
+ *	@_skb_refdst: destination entry (with norefcount bit)
+ *	@sp: the security path, used for xfrm
+ *	@len: Length of actual data
+ *	@data_len: Data length
+ *	@mac_len: Length of link layer header
+ *	@hdr_len: writable header length of cloned skb
+ *	@csum: Checksum (must include start/offset pair)
+ *	@csum_start: Offset from skb->head where checksumming should start
+ *	@csum_offset: Offset from csum_start where checksum should be stored
+ *	@priority: Packet queueing priority
+ *	@local_df: allow local fragmentation
+ *	@cloned: Head may be cloned (check refcnt to be sure)
+ *	@ip_summed: Driver fed us an IP checksum
+ *	@nohdr: Payload reference only, must not modify header
+ *	@nfctinfo: Relationship of this skb to the connection
+ *	@pkt_type: Packet class
+ *	@fclone: skbuff clone status
+ *	@ipvs_property: skbuff is owned by ipvs
+ *	@peeked: this packet has been seen already, so stats have been
+ *		done for it, don't do them again
+ *	@nf_trace: netfilter packet trace flag
+ *	@protocol: Packet protocol from driver
+ *	@destructor: Destruct function
+ *	@nfct: Associated connection, if any
+ *	@nfct_reasm: netfilter conntrack re-assembly pointer
+ *	@nf_bridge: Saved data about a bridged frame - see br_netfilter.c
+ *	@skb_iif: ifindex of device we arrived on
+ *	@tc_index: Traffic control index
+ *	@tc_verd: traffic control verdict
+ *	@rxhash: the packet hash computed on receive
+ *	@queue_mapping: Queue mapping for multiqueue devices
+ *	@ndisc_nodetype: router type (from link layer)
+ *	@ooo_okay: allow the mapping of a socket to a queue to be changed
+ *	@l4_rxhash: indicate rxhash is a canonical 4-tuple hash over transport
+ *		ports.
+ *	@wifi_acked_valid: wifi_acked was set
+ *	@wifi_acked: whether frame was acked on wifi or not
+ *	@no_fcs:  Request NIC to treat last 4 bytes as Ethernet FCS
+ *	@dma_cookie: a cookie to one of several possible DMA operations
+ *		done by skb DMA functions
+ *	@secmark: security marking
+ *	@mark: Generic packet mark
+ *	@dropcount: total number of sk_receive_queue overflows
+ *	@vlan_tci: vlan tag control information
+ *	@transport_header: Transport layer header
+ *	@network_header: Network layer header
+ *	@mac_header: Link layer header
+ *	@tail: Tail pointer
+ *	@end: End pointer
+ *	@head: Head of buffer
+ *	@data: Data head pointer
+ *	@truesize: Buffer size
+ *	@users: User count - see {datagram,tcp}.c
+ */
+
+struct sk_buff {
+	/* These two members must be first. */
+	struct sk_buff		*next;
+	struct sk_buff		*prev;
+
+	ktime_t			tstamp;
+
+	struct sock		*sk;
+	struct net_device	*dev;
+
+	/*
+	 * This is the control buffer. It is free to use for every
+	 * layer. Please put your private variables there. If you
+	 * want to keep them across layers you have to do a skb_clone()
+	 * first. This is owned by whoever has the skb queued ATM.
+	 */
+	char			cb[48] __aligned(8);
+
+	unsigned long		_skb_refdst;
+#ifdef CONFIG_XFRM
+	struct	sec_path	*sp;
+#endif
+	unsigned int		len,
+				data_len;
+	__u16			mac_len,
+				hdr_len;
+	union {
+		__wsum		csum;
+		struct {
+			__u16	csum_start;
+			__u16	csum_offset;
+		};
+	};
+	__u32			priority;
+	kmemcheck_bitfield_begin(flags1);
+	__u8			local_df:1,
+				cloned:1,
+				ip_summed:2,
+				nohdr:1,
+				nfctinfo:3;
+	__u8			pkt_type:3,
+				fclone:2,
+				ipvs_property:1,
+				peeked:1,
+				nf_trace:1;
+	kmemcheck_bitfield_end(flags1);
+	__be16			protocol;
+
+	void			(*destructor)(struct sk_buff *skb);
+#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
+	struct nf_conntrack	*nfct;
+#endif
+#ifdef NET_SKBUFF_NF_DEFRAG_NEEDED
+	struct sk_buff		*nfct_reasm;
+#endif
+#ifdef CONFIG_BRIDGE_NETFILTER
+	struct nf_bridge_info	*nf_bridge;
+#endif
+
+	int			skb_iif;
+
+	__u32			rxhash;
+
+	__u16			vlan_tci;
+
+#ifdef CONFIG_NET_SCHED
+	__u16			tc_index;	/* traffic control index */
+#ifdef CONFIG_NET_CLS_ACT
+	__u16			tc_verd;	/* traffic control verdict */
+#endif
+#endif
+
+	__u16			queue_mapping;
+	kmemcheck_bitfield_begin(flags2);
+#ifdef CONFIG_IPV6_NDISC_NODETYPE
+	__u8			ndisc_nodetype:2;
+#endif
+	__u8			ooo_okay:1;
+	__u8			l4_rxhash:1;
+	__u8			wifi_acked_valid:1;
+	__u8			wifi_acked:1;
+	__u8			no_fcs:1;
+	/* 9/11 bit hole (depending on ndisc_nodetype presence) */
+	kmemcheck_bitfield_end(flags2);
+
+#ifdef CONFIG_NET_DMA
+	dma_cookie_t		dma_cookie;
+#endif
+#ifdef CONFIG_NETWORK_SECMARK
+	__u32			secmark;
+#endif
+	union {
+		__u32		mark;
+		__u32		dropcount;
+		__u32		avail_size;
+	};
+
+	sk_buff_data_t		transport_header;
+	sk_buff_data_t		network_header;
+	sk_buff_data_t		mac_header;
+	/* These elements must be at the end, see alloc_skb() for details.  */
+	sk_buff_data_t		tail;
+	sk_buff_data_t		end;
+	unsigned char		*head,
+				*data;
+	unsigned int		truesize;
+	atomic_t		users;
+};
+
+#ifdef __KERNEL__
+/*
+ *	Handling routines are only of interest to the kernel
+ */
+#include <linux/slab.h>
+
+
+/*
+ * skb might have a dst pointer attached, refcounted or not.
+ * _skb_refdst low order bit is set if refcount was _not_ taken
+ */
+#define SKB_DST_NOREF	1UL
+#define SKB_DST_PTRMASK	~(SKB_DST_NOREF)
+
+/**
+ * skb_dst - returns skb dst_entry
+ * @skb: buffer
+ *
+ * Returns skb dst_entry, regardless of reference taken or not.
+ */
+static inline struct dst_entry *skb_dst(const struct sk_buff *skb)
+{
+	/* If refdst was not refcounted, check we still are in a 
+	 * rcu_read_lock section
+	 */
+	WARN_ON((skb->_skb_refdst & SKB_DST_NOREF) &&
+		!rcu_read_lock_held() &&
+		!rcu_read_lock_bh_held());
+	return (struct dst_entry *)(skb->_skb_refdst & SKB_DST_PTRMASK);
+}
+
+/**
+ * skb_dst_set - sets skb dst
+ * @skb: buffer
+ * @dst: dst entry
+ *
+ * Sets skb dst, assuming a reference was taken on dst and should
+ * be released by skb_dst_drop()
+ */
+static inline void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst)
+{
+	skb->_skb_refdst = (unsigned long)dst;
+}
+
+extern void skb_dst_set_noref(struct sk_buff *skb, struct dst_entry *dst);
+
+/**
+ * skb_dst_is_noref - Test if skb dst isn't refcounted
+ * @skb: buffer
+ */
+static inline bool skb_dst_is_noref(const struct sk_buff *skb)
+{
+	return (skb->_skb_refdst & SKB_DST_NOREF) && skb_dst(skb);
+}
+
+static inline struct rtable *skb_rtable(const struct sk_buff *skb)
+{
+	return (struct rtable *)skb_dst(skb);
+}
+
+extern void kfree_skb(struct sk_buff *skb);
+extern void consume_skb(struct sk_buff *skb);
+extern void	       __kfree_skb(struct sk_buff *skb);
+extern struct sk_buff *__alloc_skb(unsigned int size,
+				   gfp_t priority, int fclone, int node);
+extern struct sk_buff *build_skb(void *data);
+static inline struct sk_buff *alloc_skb(unsigned int size,
+					gfp_t priority)
+{
+	return __alloc_skb(size, priority, 0, NUMA_NO_NODE);
+}
+
+static inline struct sk_buff *alloc_skb_fclone(unsigned int size,
+					       gfp_t priority)
+{
+	return __alloc_skb(size, priority, 1, NUMA_NO_NODE);
+}
+
+extern void skb_recycle(struct sk_buff *skb);
+extern bool skb_recycle_check(struct sk_buff *skb, int skb_size);
+
+extern struct sk_buff *skb_morph(struct sk_buff *dst, struct sk_buff *src);
+extern int skb_copy_ubufs(struct sk_buff *skb, gfp_t gfp_mask);
+extern struct sk_buff *skb_clone(struct sk_buff *skb,
+				 gfp_t priority);
+extern struct sk_buff *skb_copy(const struct sk_buff *skb,
+				gfp_t priority);
+extern struct sk_buff *__pskb_copy(struct sk_buff *skb,
+				 int headroom, gfp_t gfp_mask);
+
+extern int	       pskb_expand_head(struct sk_buff *skb,
+					int nhead, int ntail,
+					gfp_t gfp_mask);
+extern struct sk_buff *skb_realloc_headroom(struct sk_buff *skb,
+					    unsigned int headroom);
+extern struct sk_buff *skb_copy_expand(const struct sk_buff *skb,
+				       int newheadroom, int newtailroom,
+				       gfp_t priority);
+extern int	       skb_to_sgvec(struct sk_buff *skb,
+				    struct scatterlist *sg, int offset,
+				    int len);
+extern int	       skb_cow_data(struct sk_buff *skb, int tailbits,
+				    struct sk_buff **trailer);
+extern int	       skb_pad(struct sk_buff *skb, int pad);
+#define dev_kfree_skb(a)	consume_skb(a)
+
+extern int skb_append_datato_frags(struct sock *sk, struct sk_buff *skb,
+			int getfrag(void *from, char *to, int offset,
+			int len,int odd, struct sk_buff *skb),
+			void *from, int length);
+
+struct skb_seq_state {
+	__u32		lower_offset;
+	__u32		upper_offset;
+	__u32		frag_idx;
+	__u32		stepped_offset;
+	struct sk_buff	*root_skb;
+	struct sk_buff	*cur_skb;
+	__u8		*frag_data;
+};
+
+extern void	      skb_prepare_seq_read(struct sk_buff *skb,
+					   unsigned int from, unsigned int to,
+					   struct skb_seq_state *st);
+extern unsigned int   skb_seq_read(unsigned int consumed, const u8 **data,
+				   struct skb_seq_state *st);
+extern void	      skb_abort_seq_read(struct skb_seq_state *st);
+
+extern unsigned int   skb_find_text(struct sk_buff *skb, unsigned int from,
+				    unsigned int to, struct ts_config *config,
+				    struct ts_state *state);
+
+extern void __skb_get_rxhash(struct sk_buff *skb);
+static inline __u32 skb_get_rxhash(struct sk_buff *skb)
+{
+	if (!skb->rxhash)
+		__skb_get_rxhash(skb);
+
+	return skb->rxhash;
+}
+
+#ifdef NET_SKBUFF_DATA_USES_OFFSET
+static inline unsigned char *skb_end_pointer(const struct sk_buff *skb)
+{
+	return skb->head + skb->end;
+}
+#else
+static inline unsigned char *skb_end_pointer(const struct sk_buff *skb)
+{
+	return skb->end;
+}
+#endif
+
+/* Internal */
+#define skb_shinfo(SKB)	((struct skb_shared_info *)(skb_end_pointer(SKB)))
+
+static inline struct skb_shared_hwtstamps *skb_hwtstamps(struct sk_buff *skb)
+{
+	return &skb_shinfo(skb)->hwtstamps;
+}
+
+/**
+ *	skb_queue_empty - check if a queue is empty
+ *	@list: queue head
+ *
+ *	Returns true if the queue is empty, false otherwise.
+ */
+static inline int skb_queue_empty(const struct sk_buff_head *list)
+{
+	return list->next == (struct sk_buff *)list;
+}
+
+/**
+ *	skb_queue_is_last - check if skb is the last entry in the queue
+ *	@list: queue head
+ *	@skb: buffer
+ *
+ *	Returns true if @skb is the last buffer on the list.
+ */
+static inline bool skb_queue_is_last(const struct sk_buff_head *list,
+				     const struct sk_buff *skb)
+{
+	return skb->next == (struct sk_buff *)list;
+}
+
+/**
+ *	skb_queue_is_first - check if skb is the first entry in the queue
+ *	@list: queue head
+ *	@skb: buffer
+ *
+ *	Returns true if @skb is the first buffer on the list.
+ */
+static inline bool skb_queue_is_first(const struct sk_buff_head *list,
+				      const struct sk_buff *skb)
+{
+	return skb->prev == (struct sk_buff *)list;
+}
+
+/**
+ *	skb_queue_next - return the next packet in the queue
+ *	@list: queue head
+ *	@skb: current buffer
+ *
+ *	Return the next packet in @list after @skb.  It is only valid to
+ *	call this if skb_queue_is_last() evaluates to false.
+ */
+static inline struct sk_buff *skb_queue_next(const struct sk_buff_head *list,
+					     const struct sk_buff *skb)
+{
+	/* This BUG_ON may seem severe, but if we just return then we
+	 * are going to dereference garbage.
+	 */
+	BUG_ON(skb_queue_is_last(list, skb));
+	return skb->next;
+}
+
+/**
+ *	skb_queue_prev - return the prev packet in the queue
+ *	@list: queue head
+ *	@skb: current buffer
+ *
+ *	Return the prev packet in @list before @skb.  It is only valid to
+ *	call this if skb_queue_is_first() evaluates to false.
+ */
+static inline struct sk_buff *skb_queue_prev(const struct sk_buff_head *list,
+					     const struct sk_buff *skb)
+{
+	/* This BUG_ON may seem severe, but if we just return then we
+	 * are going to dereference garbage.
+	 */
+	BUG_ON(skb_queue_is_first(list, skb));
+	return skb->prev;
+}
+
+/**
+ *	skb_get - reference buffer
+ *	@skb: buffer to reference
+ *
+ *	Makes another reference to a socket buffer and returns a pointer
+ *	to the buffer.
+ */
+static inline struct sk_buff *skb_get(struct sk_buff *skb)
+{
+	atomic_inc(&skb->users);
+	return skb;
+}
+
+/*
+ * If users == 1, we are the only owner and are can avoid redundant
+ * atomic change.
+ */
+
+/**
+ *	skb_cloned - is the buffer a clone
+ *	@skb: buffer to check
+ *
+ *	Returns true if the buffer was generated with skb_clone() and is
+ *	one of multiple shared copies of the buffer. Cloned buffers are
+ *	shared data so must not be written to under normal circumstances.
+ */
+static inline int skb_cloned(const struct sk_buff *skb)
+{
+	return skb->cloned &&
+	       (atomic_read(&skb_shinfo(skb)->dataref) & SKB_DATAREF_MASK) != 1;
+}
+
+/**
+ *	skb_header_cloned - is the header a clone
+ *	@skb: buffer to check
+ *
+ *	Returns true if modifying the header part of the buffer requires
+ *	the data to be copied.
+ */
+static inline int skb_header_cloned(const struct sk_buff *skb)
+{
+	int dataref;
+
+	if (!skb->cloned)
+		return 0;
+
+	dataref = atomic_read(&skb_shinfo(skb)->dataref);
+	dataref = (dataref & SKB_DATAREF_MASK) - (dataref >> SKB_DATAREF_SHIFT);
+	return dataref != 1;
+}
+
+/**
+ *	skb_header_release - release reference to header
+ *	@skb: buffer to operate on
+ *
+ *	Drop a reference to the header part of the buffer.  This is done
+ *	by acquiring a payload reference.  You must not read from the header
+ *	part of skb->data after this.
+ */
+static inline void skb_header_release(struct sk_buff *skb)
+{
+	BUG_ON(skb->nohdr);
+	skb->nohdr = 1;
+	atomic_add(1 << SKB_DATAREF_SHIFT, &skb_shinfo(skb)->dataref);
+}
+
+/**
+ *	skb_shared - is the buffer shared
+ *	@skb: buffer to check
+ *
+ *	Returns true if more than one person has a reference to this
+ *	buffer.
+ */
+static inline int skb_shared(const struct sk_buff *skb)
+{
+	return atomic_read(&skb->users) != 1;
+}
+
+/**
+ *	skb_share_check - check if buffer is shared and if so clone it
+ *	@skb: buffer to check
+ *	@pri: priority for memory allocation
+ *
+ *	If the buffer is shared the buffer is cloned and the old copy
+ *	drops a reference. A new clone with a single reference is returned.
+ *	If the buffer is not shared the original buffer is returned. When
+ *	being called from interrupt status or with spinlocks held pri must
+ *	be GFP_ATOMIC.
+ *
+ *	NULL is returned on a memory allocation failure.
+ */
+static inline struct sk_buff *skb_share_check(struct sk_buff *skb,
+					      gfp_t pri)
+{
+	might_sleep_if(pri & __GFP_WAIT);
+	if (skb_shared(skb)) {
+		struct sk_buff *nskb = skb_clone(skb, pri);
+		kfree_skb(skb);
+		skb = nskb;
+	}
+	return skb;
+}
+
+/*
+ *	Copy shared buffers into a new sk_buff. We effectively do COW on
+ *	packets to handle cases where we have a local reader and forward
+ *	and a couple of other messy ones. The normal one is tcpdumping
+ *	a packet thats being forwarded.
+ */
+
+/**
+ *	skb_unshare - make a copy of a shared buffer
+ *	@skb: buffer to check
+ *	@pri: priority for memory allocation
+ *
+ *	If the socket buffer is a clone then this function creates a new
+ *	copy of the data, drops a reference count on the old copy and returns
+ *	the new copy with the reference count at 1. If the buffer is not a clone
+ *	the original buffer is returned. When called with a spinlock held or
+ *	from interrupt state @pri must be %GFP_ATOMIC
+ *
+ *	%NULL is returned on a memory allocation failure.
+ */
+static inline struct sk_buff *skb_unshare(struct sk_buff *skb,
+					  gfp_t pri)
+{
+	might_sleep_if(pri & __GFP_WAIT);
+	if (skb_cloned(skb)) {
+		struct sk_buff *nskb = skb_copy(skb, pri);
+		kfree_skb(skb);	/* Free our shared copy */
+		skb = nskb;
+	}
+	return skb;
+}
+
+/**
+ *	skb_peek - peek at the head of an &sk_buff_head
+ *	@list_: list to peek at
+ *
+ *	Peek an &sk_buff. Unlike most other operations you _MUST_
+ *	be careful with this one. A peek leaves the buffer on the
+ *	list and someone else may run off with it. You must hold
+ *	the appropriate locks or have a private queue to do this.
+ *
+ *	Returns %NULL for an empty list or a pointer to the head element.
+ *	The reference count is not incremented and the reference is therefore
+ *	volatile. Use with caution.
+ */
+static inline struct sk_buff *skb_peek(const struct sk_buff_head *list_)
+{
+	struct sk_buff *list = ((const struct sk_buff *)list_)->next;
+	if (list == (struct sk_buff *)list_)
+		list = NULL;
+	return list;
+}
+
+/**
+ *	skb_peek_next - peek skb following the given one from a queue
+ *	@skb: skb to start from
+ *	@list_: list to peek at
+ *
+ *	Returns %NULL when the end of the list is met or a pointer to the
+ *	next element. The reference count is not incremented and the
+ *	reference is therefore volatile. Use with caution.
+ */
+static inline struct sk_buff *skb_peek_next(struct sk_buff *skb,
+		const struct sk_buff_head *list_)
+{
+	struct sk_buff *next = skb->next;
+	if (next == (struct sk_buff *)list_)
+		next = NULL;
+	return next;
+}
+
+/**
+ *	skb_peek_tail - peek at the tail of an &sk_buff_head
+ *	@list_: list to peek at
+ *
+ *	Peek an &sk_buff. Unlike most other operations you _MUST_
+ *	be careful with this one. A peek leaves the buffer on the
+ *	list and someone else may run off with it. You must hold
+ *	the appropriate locks or have a private queue to do this.
+ *
+ *	Returns %NULL for an empty list or a pointer to the tail element.
+ *	The reference count is not incremented and the reference is therefore
+ *	volatile. Use with caution.
+ */
+static inline struct sk_buff *skb_peek_tail(const struct sk_buff_head *list_)
+{
+	struct sk_buff *list = ((const struct sk_buff *)list_)->prev;
+	if (list == (struct sk_buff *)list_)
+		list = NULL;
+	return list;
+}
+
+/**
+ *	skb_queue_len	- get queue length
+ *	@list_: list to measure
+ *
+ *	Return the length of an &sk_buff queue.
+ */
+static inline __u32 skb_queue_len(const struct sk_buff_head *list_)
+{
+	return list_->qlen;
+}
+
+/**
+ *	__skb_queue_head_init - initialize non-spinlock portions of sk_buff_head
+ *	@list: queue to initialize
+ *
+ *	This initializes only the list and queue length aspects of
+ *	an sk_buff_head object.  This allows to initialize the list
+ *	aspects of an sk_buff_head without reinitializing things like
+ *	the spinlock.  It can also be used for on-stack sk_buff_head
+ *	objects where the spinlock is known to not be used.
+ */
+static inline void __skb_queue_head_init(struct sk_buff_head *list)
+{
+	list->prev = list->next = (struct sk_buff *)list;
+	list->qlen = 0;
+}
+
+/*
+ * This function creates a split out lock class for each invocation;
+ * this is needed for now since a whole lot of users of the skb-queue
+ * infrastructure in drivers have different locking usage (in hardirq)
+ * than the networking core (in softirq only). In the long run either the
+ * network layer or drivers should need annotation to consolidate the
+ * main types of usage into 3 classes.
+ */
+static inline void skb_queue_head_init(struct sk_buff_head *list)
+{
+	spin_lock_init(&list->lock);
+	__skb_queue_head_init(list);
+}
+
+static inline void skb_queue_head_init_class(struct sk_buff_head *list,
+		struct lock_class_key *class)
+{
+	skb_queue_head_init(list);
+	lockdep_set_class(&list->lock, class);
+}
+
+/*
+ *	Insert an sk_buff on a list.
+ *
+ *	The "__skb_xxxx()" functions are the non-atomic ones that
+ *	can only be called with interrupts disabled.
+ */
+extern void        skb_insert(struct sk_buff *old, struct sk_buff *newsk, struct sk_buff_head *list);
+static inline void __skb_insert(struct sk_buff *newsk,
+				struct sk_buff *prev, struct sk_buff *next,
+				struct sk_buff_head *list)
+{
+	newsk->next = next;
+	newsk->prev = prev;
+	next->prev  = prev->next = newsk;
+	list->qlen++;
+}
+
+static inline void __skb_queue_splice(const struct sk_buff_head *list,
+				      struct sk_buff *prev,
+				      struct sk_buff *next)
+{
+	struct sk_buff *first = list->next;
+	struct sk_buff *last = list->prev;
+
+	first->prev = prev;
+	prev->next = first;
+
+	last->next = next;
+	next->prev = last;
+}
+
+/**
+ *	skb_queue_splice - join two skb lists, this is designed for stacks
+ *	@list: the new list to add
+ *	@head: the place to add it in the first list
+ */
+static inline void skb_queue_splice(const struct sk_buff_head *list,
+				    struct sk_buff_head *head)
+{
+	if (!skb_queue_empty(list)) {
+		__skb_queue_splice(list, (struct sk_buff *) head, head->next);
+		head->qlen += list->qlen;
+	}
+}
+
+/**
+ *	skb_queue_splice_init - join two skb lists and reinitialise the emptied list
+ *	@list: the new list to add
+ *	@head: the place to add it in the first list
+ *
+ *	The list at @list is reinitialised
+ */
+static inline void skb_queue_splice_init(struct sk_buff_head *list,
+					 struct sk_buff_head *head)
+{
+	if (!skb_queue_empty(list)) {
+		__skb_queue_splice(list, (struct sk_buff *) head, head->next);
+		head->qlen += list->qlen;
+		__skb_queue_head_init(list);
+	}
+}
+
+/**
+ *	skb_queue_splice_tail - join two skb lists, each list being a queue
+ *	@list: the new list to add
+ *	@head: the place to add it in the first list
+ */
+static inline void skb_queue_splice_tail(const struct sk_buff_head *list,
+					 struct sk_buff_head *head)
+{
+	if (!skb_queue_empty(list)) {
+		__skb_queue_splice(list, head->prev, (struct sk_buff *) head);
+		head->qlen += list->qlen;
+	}
+}
+
+/**
+ *	skb_queue_splice_tail_init - join two skb lists and reinitialise the emptied list
+ *	@list: the new list to add
+ *	@head: the place to add it in the first list
+ *
+ *	Each of the lists is a queue.
+ *	The list at @list is reinitialised
+ */
+static inline void skb_queue_splice_tail_init(struct sk_buff_head *list,
+					      struct sk_buff_head *head)
+{
+	if (!skb_queue_empty(list)) {
+		__skb_queue_splice(list, head->prev, (struct sk_buff *) head);
+		head->qlen += list->qlen;
+		__skb_queue_head_init(list);
+	}
+}
+
+/**
+ *	__skb_queue_after - queue a buffer at the list head
+ *	@list: list to use
+ *	@prev: place after this buffer
+ *	@newsk: buffer to queue
+ *
+ *	Queue a buffer int the middle of a list. This function takes no locks
+ *	and you must therefore hold required locks before calling it.
+ *
+ *	A buffer cannot be placed on two lists at the same time.
+ */
+static inline void __skb_queue_after(struct sk_buff_head *list,
+				     struct sk_buff *prev,
+				     struct sk_buff *newsk)
+{
+	__skb_insert(newsk, prev, prev->next, list);
+}
+
+extern void skb_append(struct sk_buff *old, struct sk_buff *newsk,
+		       struct sk_buff_head *list);
+
+static inline void __skb_queue_before(struct sk_buff_head *list,
+				      struct sk_buff *next,
+				      struct sk_buff *newsk)
+{
+	__skb_insert(newsk, next->prev, next, list);
+}
+
+/**
+ *	__skb_queue_head - queue a buffer at the list head
+ *	@list: list to use
+ *	@newsk: buffer to queue
+ *
+ *	Queue a buffer at the start of a list. This function takes no locks
+ *	and you must therefore hold required locks before calling it.
+ *
+ *	A buffer cannot be placed on two lists at the same time.
+ */
+extern void skb_queue_head(struct sk_buff_head *list, struct sk_buff *newsk);
+static inline void __skb_queue_head(struct sk_buff_head *list,
+				    struct sk_buff *newsk)
+{
+	__skb_queue_after(list, (struct sk_buff *)list, newsk);
+}
+
+/**
+ *	__skb_queue_tail - queue a buffer at the list tail
+ *	@list: list to use
+ *	@newsk: buffer to queue
+ *
+ *	Queue a buffer at the end of a list. This function takes no locks
+ *	and you must therefore hold required locks before calling it.
+ *
+ *	A buffer cannot be placed on two lists at the same time.
+ */
+extern void skb_queue_tail(struct sk_buff_head *list, struct sk_buff *newsk);
+static inline void __skb_queue_tail(struct sk_buff_head *list,
+				   struct sk_buff *newsk)
+{
+	__skb_queue_before(list, (struct sk_buff *)list, newsk);
+}
+
+/*
+ * remove sk_buff from list. _Must_ be called atomically, and with
+ * the list known..
+ */
+extern void	   skb_unlink(struct sk_buff *skb, struct sk_buff_head *list);
+static inline void __skb_unlink(struct sk_buff *skb, struct sk_buff_head *list)
+{
+	struct sk_buff *next, *prev;
+
+	list->qlen--;
+	next	   = skb->next;
+	prev	   = skb->prev;
+	skb->next  = skb->prev = NULL;
+	next->prev = prev;
+	prev->next = next;
+}
+
+/**
+ *	__skb_dequeue - remove from the head of the queue
+ *	@list: list to dequeue from
+ *
+ *	Remove the head of the list. This function does not take any locks
+ *	so must be used with appropriate locks held only. The head item is
+ *	returned or %NULL if the list is empty.
+ */
+extern struct sk_buff *skb_dequeue(struct sk_buff_head *list);
+static inline struct sk_buff *__skb_dequeue(struct sk_buff_head *list)
+{
+	struct sk_buff *skb = skb_peek(list);
+	if (skb)
+		__skb_unlink(skb, list);
+	return skb;
+}
+
+/**
+ *	__skb_dequeue_tail - remove from the tail of the queue
+ *	@list: list to dequeue from
+ *
+ *	Remove the tail of the list. This function does not take any locks
+ *	so must be used with appropriate locks held only. The tail item is
+ *	returned or %NULL if the list is empty.
+ */
+extern struct sk_buff *skb_dequeue_tail(struct sk_buff_head *list);
+static inline struct sk_buff *__skb_dequeue_tail(struct sk_buff_head *list)
+{
+	struct sk_buff *skb = skb_peek_tail(list);
+	if (skb)
+		__skb_unlink(skb, list);
+	return skb;
+}
+
+
+static inline bool skb_is_nonlinear(const struct sk_buff *skb)
+{
+	return skb->data_len;
+}
+
+static inline unsigned int skb_headlen(const struct sk_buff *skb)
+{
+	return skb->len - skb->data_len;
+}
+
+static inline int skb_pagelen(const struct sk_buff *skb)
+{
+	int i, len = 0;
+
+	for (i = (int)skb_shinfo(skb)->nr_frags - 1; i >= 0; i--)
+		len += skb_frag_size(&skb_shinfo(skb)->frags[i]);
+	return len + skb_headlen(skb);
+}
+
+/**
+ * __skb_fill_page_desc - initialise a paged fragment in an skb
+ * @skb: buffer containing fragment to be initialised
+ * @i: paged fragment index to initialise
+ * @page: the page to use for this fragment
+ * @off: the offset to the data with @page
+ * @size: the length of the data
+ *
+ * Initialises the @i'th fragment of @skb to point to &size bytes at
+ * offset @off within @page.
+ *
+ * Does not take any additional reference on the fragment.
+ */
+static inline void __skb_fill_page_desc(struct sk_buff *skb, int i,
+					struct page *page, int off, int size)
+{
+	skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+
+	frag->page.p		  = page;
+	frag->page_offset	  = off;
+	skb_frag_size_set(frag, size);
+}
+
+/**
+ * skb_fill_page_desc - initialise a paged fragment in an skb
+ * @skb: buffer containing fragment to be initialised
+ * @i: paged fragment index to initialise
+ * @page: the page to use for this fragment
+ * @off: the offset to the data with @page
+ * @size: the length of the data
+ *
+ * As per __skb_fill_page_desc() -- initialises the @i'th fragment of
+ * @skb to point to &size bytes at offset @off within @page. In
+ * addition updates @skb such that @i is the last fragment.
+ *
+ * Does not take any additional reference on the fragment.
+ */
+static inline void skb_fill_page_desc(struct sk_buff *skb, int i,
+				      struct page *page, int off, int size)
+{
+	__skb_fill_page_desc(skb, i, page, off, size);
+	skb_shinfo(skb)->nr_frags = i + 1;
+}
+
+extern void skb_add_rx_frag(struct sk_buff *skb, int i, struct page *page,
+			    int off, int size, unsigned int truesize);
+
+#define SKB_PAGE_ASSERT(skb) 	BUG_ON(skb_shinfo(skb)->nr_frags)
+#define SKB_FRAG_ASSERT(skb) 	BUG_ON(skb_has_frag_list(skb))
+#define SKB_LINEAR_ASSERT(skb)  BUG_ON(skb_is_nonlinear(skb))
+
+#ifdef NET_SKBUFF_DATA_USES_OFFSET
+static inline unsigned char *skb_tail_pointer(const struct sk_buff *skb)
+{
+	return skb->head + skb->tail;
+}
+
+static inline void skb_reset_tail_pointer(struct sk_buff *skb)
+{
+	skb->tail = skb->data - skb->head;
+}
+
+static inline void skb_set_tail_pointer(struct sk_buff *skb, const int offset)
+{
+	skb_reset_tail_pointer(skb);
+	skb->tail += offset;
+}
+#else /* NET_SKBUFF_DATA_USES_OFFSET */
+static inline unsigned char *skb_tail_pointer(const struct sk_buff *skb)
+{
+	return skb->tail;
+}
+
+static inline void skb_reset_tail_pointer(struct sk_buff *skb)
+{
+	skb->tail = skb->data;
+}
+
+static inline void skb_set_tail_pointer(struct sk_buff *skb, const int offset)
+{
+	skb->tail = skb->data + offset;
+}
+
+#endif /* NET_SKBUFF_DATA_USES_OFFSET */
+
+/*
+ *	Add data to an sk_buff
+ */
+extern unsigned char *skb_put(struct sk_buff *skb, unsigned int len);
+static inline unsigned char *__skb_put(struct sk_buff *skb, unsigned int len)
+{
+	unsigned char *tmp = skb_tail_pointer(skb);
+	SKB_LINEAR_ASSERT(skb);
+	skb->tail += len;
+	skb->len  += len;
+	return tmp;
+}
+
+extern unsigned char *skb_push(struct sk_buff *skb, unsigned int len);
+static inline unsigned char *__skb_push(struct sk_buff *skb, unsigned int len)
+{
+	skb->data -= len;
+	skb->len  += len;
+	return skb->data;
+}
+
+extern unsigned char *skb_pull(struct sk_buff *skb, unsigned int len);
+static inline unsigned char *__skb_pull(struct sk_buff *skb, unsigned int len)
+{
+	skb->len -= len;
+	BUG_ON(skb->len < skb->data_len);
+	return skb->data += len;
+}
+
+static inline unsigned char *skb_pull_inline(struct sk_buff *skb, unsigned int len)
+{
+	return unlikely(len > skb->len) ? NULL : __skb_pull(skb, len);
+}
+
+extern unsigned char *__pskb_pull_tail(struct sk_buff *skb, int delta);
+
+static inline unsigned char *__pskb_pull(struct sk_buff *skb, unsigned int len)
+{
+	if (len > skb_headlen(skb) &&
+	    !__pskb_pull_tail(skb, len - skb_headlen(skb)))
+		return NULL;
+	skb->len -= len;
+	return skb->data += len;
+}
+
+static inline unsigned char *pskb_pull(struct sk_buff *skb, unsigned int len)
+{
+	return unlikely(len > skb->len) ? NULL : __pskb_pull(skb, len);
+}
+
+static inline int pskb_may_pull(struct sk_buff *skb, unsigned int len)
+{
+	if (likely(len <= skb_headlen(skb)))
+		return 1;
+	if (unlikely(len > skb->len))
+		return 0;
+	return __pskb_pull_tail(skb, len - skb_headlen(skb)) != NULL;
+}
+
+/**
+ *	skb_headroom - bytes at buffer head
+ *	@skb: buffer to check
+ *
+ *	Return the number of bytes of free space at the head of an &sk_buff.
+ */
+static inline unsigned int skb_headroom(const struct sk_buff *skb)
+{
+	return skb->data - skb->head;
+}
+
+/**
+ *	skb_tailroom - bytes at buffer end
+ *	@skb: buffer to check
+ *
+ *	Return the number of bytes of free space at the tail of an sk_buff
+ */
+static inline int skb_tailroom(const struct sk_buff *skb)
+{
+	return skb_is_nonlinear(skb) ? 0 : skb->end - skb->tail;
+}
+
+/**
+ *	skb_availroom - bytes at buffer end
+ *	@skb: buffer to check
+ *
+ *	Return the number of bytes of free space at the tail of an sk_buff
+ *	allocated by sk_stream_alloc()
+ */
+static inline int skb_availroom(const struct sk_buff *skb)
+{
+	return skb_is_nonlinear(skb) ? 0 : skb->avail_size - skb->len;
+}
+
+/**
+ *	skb_reserve - adjust headroom
+ *	@skb: buffer to alter
+ *	@len: bytes to move
+ *
+ *	Increase the headroom of an empty &sk_buff by reducing the tail
+ *	room. This is only allowed for an empty buffer.
+ */
+static inline void skb_reserve(struct sk_buff *skb, int len)
+{
+	skb->data += len;
+	skb->tail += len;
+}
+
+static inline void skb_reset_mac_len(struct sk_buff *skb)
+{
+	skb->mac_len = skb->network_header - skb->mac_header;
+}
+
+#ifdef NET_SKBUFF_DATA_USES_OFFSET
+static inline unsigned char *skb_transport_header(const struct sk_buff *skb)
+{
+	return skb->head + skb->transport_header;
+}
+
+static inline void skb_reset_transport_header(struct sk_buff *skb)
+{
+	skb->transport_header = skb->data - skb->head;
+}
+
+static inline void skb_set_transport_header(struct sk_buff *skb,
+					    const int offset)
+{
+	skb_reset_transport_header(skb);
+	skb->transport_header += offset;
+}
+
+static inline unsigned char *skb_network_header(const struct sk_buff *skb)
+{
+	return skb->head + skb->network_header;
+}
+
+static inline void skb_reset_network_header(struct sk_buff *skb)
+{
+	skb->network_header = skb->data - skb->head;
+}
+
+static inline void skb_set_network_header(struct sk_buff *skb, const int offset)
+{
+	skb_reset_network_header(skb);
+	skb->network_header += offset;
+}
+
+static inline unsigned char *skb_mac_header(const struct sk_buff *skb)
+{
+	return skb->head + skb->mac_header;
+}
+
+static inline int skb_mac_header_was_set(const struct sk_buff *skb)
+{
+	return skb->mac_header != ~0U;
+}
+
+static inline void skb_reset_mac_header(struct sk_buff *skb)
+{
+	skb->mac_header = skb->data - skb->head;
+}
+
+static inline void skb_set_mac_header(struct sk_buff *skb, const int offset)
+{
+	skb_reset_mac_header(skb);
+	skb->mac_header += offset;
+}
+
+#else /* NET_SKBUFF_DATA_USES_OFFSET */
+
+static inline unsigned char *skb_transport_header(const struct sk_buff *skb)
+{
+	return skb->transport_header;
+}
+
+static inline void skb_reset_transport_header(struct sk_buff *skb)
+{
+	skb->transport_header = skb->data;
+}
+
+static inline void skb_set_transport_header(struct sk_buff *skb,
+					    const int offset)
+{
+	skb->transport_header = skb->data + offset;
+}
+
+static inline unsigned char *skb_network_header(const struct sk_buff *skb)
+{
+	return skb->network_header;
+}
+
+static inline void skb_reset_network_header(struct sk_buff *skb)
+{
+	skb->network_header = skb->data;
+}
+
+static inline void skb_set_network_header(struct sk_buff *skb, const int offset)
+{
+	skb->network_header = skb->data + offset;
+}
+
+static inline unsigned char *skb_mac_header(const struct sk_buff *skb)
+{
+	return skb->mac_header;
+}
+
+static inline int skb_mac_header_was_set(const struct sk_buff *skb)
+{
+	return skb->mac_header != NULL;
+}
+
+static inline void skb_reset_mac_header(struct sk_buff *skb)
+{
+	skb->mac_header = skb->data;
+}
+
+static inline void skb_set_mac_header(struct sk_buff *skb, const int offset)
+{
+	skb->mac_header = skb->data + offset;
+}
+#endif /* NET_SKBUFF_DATA_USES_OFFSET */
+
+static inline void skb_mac_header_rebuild(struct sk_buff *skb)
+{
+	if (skb_mac_header_was_set(skb)) {
+		const unsigned char *old_mac = skb_mac_header(skb);
+
+		skb_set_mac_header(skb, -skb->mac_len);
+		memmove(skb_mac_header(skb), old_mac, skb->mac_len);
+	}
+}
+
+static inline int skb_checksum_start_offset(const struct sk_buff *skb)
+{
+	return skb->csum_start - skb_headroom(skb);
+}
+
+static inline int skb_transport_offset(const struct sk_buff *skb)
+{
+	return skb_transport_header(skb) - skb->data;
+}
+
+static inline u32 skb_network_header_len(const struct sk_buff *skb)
+{
+	return skb->transport_header - skb->network_header;
+}
+
+static inline int skb_network_offset(const struct sk_buff *skb)
+{
+	return skb_network_header(skb) - skb->data;
+}
+
+static inline int pskb_network_may_pull(struct sk_buff *skb, unsigned int len)
+{
+	return pskb_may_pull(skb, skb_network_offset(skb) + len);
+}
+
+/*
+ * CPUs often take a performance hit when accessing unaligned memory
+ * locations. The actual performance hit varies, it can be small if the
+ * hardware handles it or large if we have to take an exception and fix it
+ * in software.
+ *
+ * Since an ethernet header is 14 bytes network drivers often end up with
+ * the IP header at an unaligned offset. The IP header can be aligned by
+ * shifting the start of the packet by 2 bytes. Drivers should do this
+ * with:
+ *
+ * skb_reserve(skb, NET_IP_ALIGN);
+ *
+ * The downside to this alignment of the IP header is that the DMA is now
+ * unaligned. On some architectures the cost of an unaligned DMA is high
+ * and this cost outweighs the gains made by aligning the IP header.
+ *
+ * Since this trade off varies between architectures, we allow NET_IP_ALIGN
+ * to be overridden.
+ */
+#ifndef NET_IP_ALIGN
+#define NET_IP_ALIGN	2
+#endif
+
+/*
+ * The networking layer reserves some headroom in skb data (via
+ * dev_alloc_skb). This is used to avoid having to reallocate skb data when
+ * the header has to grow. In the default case, if the header has to grow
+ * 32 bytes or less we avoid the reallocation.
+ *
+ * Unfortunately this headroom changes the DMA alignment of the resulting
+ * network packet. As for NET_IP_ALIGN, this unaligned DMA is expensive
+ * on some architectures. An architecture can override this value,
+ * perhaps setting it to a cacheline in size (since that will maintain
+ * cacheline alignment of the DMA). It must be a power of 2.
+ *
+ * Various parts of the networking layer expect at least 32 bytes of
+ * headroom, you should not reduce this.
+ *
+ * Using max(32, L1_CACHE_BYTES) makes sense (especially with RPS)
+ * to reduce average number of cache lines per packet.
+ * get_rps_cpus() for example only access one 64 bytes aligned block :
+ * NET_IP_ALIGN(2) + ethernet_header(14) + IP_header(20/40) + ports(8)
+ */
+#ifndef NET_SKB_PAD
+#define NET_SKB_PAD	max(32, L1_CACHE_BYTES)
+#endif
+
+extern int ___pskb_trim(struct sk_buff *skb, unsigned int len);
+
+static inline void __skb_trim(struct sk_buff *skb, unsigned int len)
+{
+	if (unlikely(skb_is_nonlinear(skb))) {
+		WARN_ON(1);
+		return;
+	}
+	skb->len = len;
+	skb_set_tail_pointer(skb, len);
+}
+
+extern void skb_trim(struct sk_buff *skb, unsigned int len);
+
+static inline int __pskb_trim(struct sk_buff *skb, unsigned int len)
+{
+	if (skb->data_len)
+		return ___pskb_trim(skb, len);
+	__skb_trim(skb, len);
+	return 0;
+}
+
+static inline int pskb_trim(struct sk_buff *skb, unsigned int len)
+{
+	return (len < skb->len) ? __pskb_trim(skb, len) : 0;
+}
+
+/**
+ *	pskb_trim_unique - remove end from a paged unique (not cloned) buffer
+ *	@skb: buffer to alter
+ *	@len: new length
+ *
+ *	This is identical to pskb_trim except that the caller knows that
+ *	the skb is not cloned so we should never get an error due to out-
+ *	of-memory.
+ */
+static inline void pskb_trim_unique(struct sk_buff *skb, unsigned int len)
+{
+	int err = pskb_trim(skb, len);
+	BUG_ON(err);
+}
+
+/**
+ *	skb_orphan - orphan a buffer
+ *	@skb: buffer to orphan
+ *
+ *	If a buffer currently has an owner then we call the owner's
+ *	destructor function and make the @skb unowned. The buffer continues
+ *	to exist but is no longer charged to its former owner.
+ */
+static inline void skb_orphan(struct sk_buff *skb)
+{
+	if (skb->destructor)
+		skb->destructor(skb);
+	skb->destructor = NULL;
+	skb->sk		= NULL;
+}
+
+/**
+ *	__skb_queue_purge - empty a list
+ *	@list: list to empty
+ *
+ *	Delete all buffers on an &sk_buff list. Each buffer is removed from
+ *	the list and one reference dropped. This function does not take the
+ *	list lock and the caller must hold the relevant locks to use it.
+ */
+extern void skb_queue_purge(struct sk_buff_head *list);
+static inline void __skb_queue_purge(struct sk_buff_head *list)
+{
+	struct sk_buff *skb;
+	while ((skb = __skb_dequeue(list)) != NULL)
+		kfree_skb(skb);
+}
+
+/**
+ *	__dev_alloc_skb - allocate an skbuff for receiving
+ *	@length: length to allocate
+ *	@gfp_mask: get_free_pages mask, passed to alloc_skb
+ *
+ *	Allocate a new &sk_buff and assign it a usage count of one. The
+ *	buffer has unspecified headroom built in. Users should allocate
+ *	the headroom they think they need without accounting for the
+ *	built in space. The built in space is used for optimisations.
+ *
+ *	%NULL is returned if there is no free memory.
+ */
+static inline struct sk_buff *__dev_alloc_skb(unsigned int length,
+					      gfp_t gfp_mask)
+{
+	struct sk_buff *skb = alloc_skb(length + NET_SKB_PAD, gfp_mask);
+	if (likely(skb))
+		skb_reserve(skb, NET_SKB_PAD);
+	return skb;
+}
+
+extern struct sk_buff *dev_alloc_skb(unsigned int length);
+
+extern struct sk_buff *__netdev_alloc_skb(struct net_device *dev,
+		unsigned int length, gfp_t gfp_mask);
+
+/**
+ *	netdev_alloc_skb - allocate an skbuff for rx on a specific device
+ *	@dev: network device to receive on
+ *	@length: length to allocate
+ *
+ *	Allocate a new &sk_buff and assign it a usage count of one. The
+ *	buffer has unspecified headroom built in. Users should allocate
+ *	the headroom they think they need without accounting for the
+ *	built in space. The built in space is used for optimisations.
+ *
+ *	%NULL is returned if there is no free memory. Although this function
+ *	allocates memory it can be called from an interrupt.
+ */
+static inline struct sk_buff *netdev_alloc_skb(struct net_device *dev,
+		unsigned int length)
+{
+	return __netdev_alloc_skb(dev, length, GFP_ATOMIC);
+}
+
+static inline struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
+		unsigned int length, gfp_t gfp)
+{
+	struct sk_buff *skb = __netdev_alloc_skb(dev, length + NET_IP_ALIGN, gfp);
+
+	if (NET_IP_ALIGN && skb)
+		skb_reserve(skb, NET_IP_ALIGN);
+	return skb;
+}
+
+static inline struct sk_buff *netdev_alloc_skb_ip_align(struct net_device *dev,
+		unsigned int length)
+{
+	return __netdev_alloc_skb_ip_align(dev, length, GFP_ATOMIC);
+}
+
+/**
+ * skb_frag_page - retrieve the page refered to by a paged fragment
+ * @frag: the paged fragment
+ *
+ * Returns the &struct page associated with @frag.
+ */
+static inline struct page *skb_frag_page(const skb_frag_t *frag)
+{
+	return frag->page.p;
+}
+
+/**
+ * __skb_frag_ref - take an addition reference on a paged fragment.
+ * @frag: the paged fragment
+ *
+ * Takes an additional reference on the paged fragment @frag.
+ */
+static inline void __skb_frag_ref(skb_frag_t *frag)
+{
+	get_page(skb_frag_page(frag));
+}
+
+/**
+ * skb_frag_ref - take an addition reference on a paged fragment of an skb.
+ * @skb: the buffer
+ * @f: the fragment offset.
+ *
+ * Takes an additional reference on the @f'th paged fragment of @skb.
+ */
+static inline void skb_frag_ref(struct sk_buff *skb, int f)
+{
+	__skb_frag_ref(&skb_shinfo(skb)->frags[f]);
+}
+
+/**
+ * __skb_frag_unref - release a reference on a paged fragment.
+ * @frag: the paged fragment
+ *
+ * Releases a reference on the paged fragment @frag.
+ */
+static inline void __skb_frag_unref(skb_frag_t *frag)
+{
+	put_page(skb_frag_page(frag));
+}
+
+/**
+ * skb_frag_unref - release a reference on a paged fragment of an skb.
+ * @skb: the buffer
+ * @f: the fragment offset
+ *
+ * Releases a reference on the @f'th paged fragment of @skb.
+ */
+static inline void skb_frag_unref(struct sk_buff *skb, int f)
+{
+	__skb_frag_unref(&skb_shinfo(skb)->frags[f]);
+}
+
+/**
+ * skb_frag_address - gets the address of the data contained in a paged fragment
+ * @frag: the paged fragment buffer
+ *
+ * Returns the address of the data within @frag. The page must already
+ * be mapped.
+ */
+static inline void *skb_frag_address(const skb_frag_t *frag)
+{
+	return page_address(skb_frag_page(frag)) + frag->page_offset;
+}
+
+/**
+ * skb_frag_address_safe - gets the address of the data contained in a paged fragment
+ * @frag: the paged fragment buffer
+ *
+ * Returns the address of the data within @frag. Checks that the page
+ * is mapped and returns %NULL otherwise.
+ */
+static inline void *skb_frag_address_safe(const skb_frag_t *frag)
+{
+	void *ptr = page_address(skb_frag_page(frag));
+	if (unlikely(!ptr))
+		return NULL;
+
+	return ptr + frag->page_offset;
+}
+
+/**
+ * __skb_frag_set_page - sets the page contained in a paged fragment
+ * @frag: the paged fragment
+ * @page: the page to set
+ *
+ * Sets the fragment @frag to contain @page.
+ */
+static inline void __skb_frag_set_page(skb_frag_t *frag, struct page *page)
+{
+	frag->page.p = page;
+}
+
+/**
+ * skb_frag_set_page - sets the page contained in a paged fragment of an skb
+ * @skb: the buffer
+ * @f: the fragment offset
+ * @page: the page to set
+ *
+ * Sets the @f'th fragment of @skb to contain @page.
+ */
+static inline void skb_frag_set_page(struct sk_buff *skb, int f,
+				     struct page *page)
+{
+	__skb_frag_set_page(&skb_shinfo(skb)->frags[f], page);
+}
+
+/**
+ * skb_frag_dma_map - maps a paged fragment via the DMA API
+ * @dev: the device to map the fragment to
+ * @frag: the paged fragment to map
+ * @offset: the offset within the fragment (starting at the
+ *          fragment's own offset)
+ * @size: the number of bytes to map
+ * @dir: the direction of the mapping (%PCI_DMA_*)
+ *
+ * Maps the page associated with @frag to @device.
+ */
+static inline dma_addr_t skb_frag_dma_map(struct device *dev,
+					  const skb_frag_t *frag,
+					  size_t offset, size_t size,
+					  enum dma_data_direction dir)
+{
+	return dma_map_page(dev, skb_frag_page(frag),
+			    frag->page_offset + offset, size, dir);
+}
+
+static inline struct sk_buff *pskb_copy(struct sk_buff *skb,
+					gfp_t gfp_mask)
+{
+	return __pskb_copy(skb, skb_headroom(skb), gfp_mask);
+}
+
+/**
+ *	skb_clone_writable - is the header of a clone writable
+ *	@skb: buffer to check
+ *	@len: length up to which to write
+ *
+ *	Returns true if modifying the header part of the cloned buffer
+ *	does not requires the data to be copied.
+ */
+static inline int skb_clone_writable(const struct sk_buff *skb, unsigned int len)
+{
+	return !skb_header_cloned(skb) &&
+	       skb_headroom(skb) + len <= skb->hdr_len;
+}
+
+static inline int __skb_cow(struct sk_buff *skb, unsigned int headroom,
+			    int cloned)
+{
+	int delta = 0;
+
+	if (headroom > skb_headroom(skb))
+		delta = headroom - skb_headroom(skb);
+
+	if (delta || cloned)
+		return pskb_expand_head(skb, ALIGN(delta, NET_SKB_PAD), 0,
+					GFP_ATOMIC);
+	return 0;
+}
+
+/**
+ *	skb_cow - copy header of skb when it is required
+ *	@skb: buffer to cow
+ *	@headroom: needed headroom
+ *
+ *	If the skb passed lacks sufficient headroom or its data part
+ *	is shared, data is reallocated. If reallocation fails, an error
+ *	is returned and original skb is not changed.
+ *
+ *	The result is skb with writable area skb->head...skb->tail
+ *	and at least @headroom of space at head.
+ */
+static inline int skb_cow(struct sk_buff *skb, unsigned int headroom)
+{
+	return __skb_cow(skb, headroom, skb_cloned(skb));
+}
+
+/**
+ *	skb_cow_head - skb_cow but only making the head writable
+ *	@skb: buffer to cow
+ *	@headroom: needed headroom
+ *
+ *	This function is identical to skb_cow except that we replace the
+ *	skb_cloned check by skb_header_cloned.  It should be used when
+ *	you only need to push on some header and do not need to modify
+ *	the data.
+ */
+static inline int skb_cow_head(struct sk_buff *skb, unsigned int headroom)
+{
+	return __skb_cow(skb, headroom, skb_header_cloned(skb));
+}
+
+/**
+ *	skb_padto	- pad an skbuff up to a minimal size
+ *	@skb: buffer to pad
+ *	@len: minimal length
+ *
+ *	Pads up a buffer to ensure the trailing bytes exist and are
+ *	blanked. If the buffer already contains sufficient data it
+ *	is untouched. Otherwise it is extended. Returns zero on
+ *	success. The skb is freed on error.
+ */
+ 
+static inline int skb_padto(struct sk_buff *skb, unsigned int len)
+{
+	unsigned int size = skb->len;
+	if (likely(size >= len))
+		return 0;
+	return skb_pad(skb, len - size);
+}
+
+static inline int skb_add_data(struct sk_buff *skb,
+			       char __user *from, int copy)
+{
+	const int off = skb->len;
+
+	if (skb->ip_summed == CHECKSUM_NONE) {
+		int err = 0;
+		__wsum csum = csum_and_copy_from_user(from, skb_put(skb, copy),
+							    copy, 0, &err);
+		if (!err) {
+			skb->csum = csum_block_add(skb->csum, csum, off);
+			return 0;
+		}
+	} else if (!copy_from_user(skb_put(skb, copy), from, copy))
+		return 0;
+
+	__skb_trim(skb, off);
+	return -EFAULT;
+}
+
+static inline int skb_can_coalesce(struct sk_buff *skb, int i,
+				   const struct page *page, int off)
+{
+	if (i) {
+		const struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i - 1];
+
+		return page == skb_frag_page(frag) &&
+		       off == frag->page_offset + skb_frag_size(frag);
+	}
+	return 0;
+}
+
+static inline int __skb_linearize(struct sk_buff *skb)
+{
+	return __pskb_pull_tail(skb, skb->data_len) ? 0 : -ENOMEM;
+}
+
+/**
+ *	skb_linearize - convert paged skb to linear one
+ *	@skb: buffer to linarize
+ *
+ *	If there is no free memory -ENOMEM is returned, otherwise zero
+ *	is returned and the old skb data released.
+ */
+static inline int skb_linearize(struct sk_buff *skb)
+{
+	return skb_is_nonlinear(skb) ? __skb_linearize(skb) : 0;
+}
+
+/**
+ *	skb_linearize_cow - make sure skb is linear and writable
+ *	@skb: buffer to process
+ *
+ *	If there is no free memory -ENOMEM is returned, otherwise zero
+ *	is returned and the old skb data released.
+ */
+static inline int skb_linearize_cow(struct sk_buff *skb)
+{
+	return skb_is_nonlinear(skb) || skb_cloned(skb) ?
+	       __skb_linearize(skb) : 0;
+}
+
+/**
+ *	skb_postpull_rcsum - update checksum for received skb after pull
+ *	@skb: buffer to update
+ *	@start: start of data before pull
+ *	@len: length of data pulled
+ *
+ *	After doing a pull on a received packet, you need to call this to
+ *	update the CHECKSUM_COMPLETE checksum, or set ip_summed to
+ *	CHECKSUM_NONE so that it can be recomputed from scratch.
+ */
+
+static inline void skb_postpull_rcsum(struct sk_buff *skb,
+				      const void *start, unsigned int len)
+{
+	if (skb->ip_summed == CHECKSUM_COMPLETE)
+		skb->csum = csum_sub(skb->csum, csum_partial(start, len, 0));
+}
+
+unsigned char *skb_pull_rcsum(struct sk_buff *skb, unsigned int len);
+
+/**
+ *	pskb_trim_rcsum - trim received skb and update checksum
+ *	@skb: buffer to trim
+ *	@len: new length
+ *
+ *	This is exactly the same as pskb_trim except that it ensures the
+ *	checksum of received packets are still valid after the operation.
+ */
+
+static inline int pskb_trim_rcsum(struct sk_buff *skb, unsigned int len)
+{
+	if (likely(len >= skb->len))
+		return 0;
+	if (skb->ip_summed == CHECKSUM_COMPLETE)
+		skb->ip_summed = CHECKSUM_NONE;
+	return __pskb_trim(skb, len);
+}
+
+#define skb_queue_walk(queue, skb) \
+		for (skb = (queue)->next;					\
+		     skb != (struct sk_buff *)(queue);				\
+		     skb = skb->next)
+
+#define skb_queue_walk_safe(queue, skb, tmp)					\
+		for (skb = (queue)->next, tmp = skb->next;			\
+		     skb != (struct sk_buff *)(queue);				\
+		     skb = tmp, tmp = skb->next)
+
+#define skb_queue_walk_from(queue, skb)						\
+		for (; skb != (struct sk_buff *)(queue);			\
+		     skb = skb->next)
+
+#define skb_queue_walk_from_safe(queue, skb, tmp)				\
+		for (tmp = skb->next;						\
+		     skb != (struct sk_buff *)(queue);				\
+		     skb = tmp, tmp = skb->next)
+
+#define skb_queue_reverse_walk(queue, skb) \
+		for (skb = (queue)->prev;					\
+		     skb != (struct sk_buff *)(queue);				\
+		     skb = skb->prev)
+
+#define skb_queue_reverse_walk_safe(queue, skb, tmp)				\
+		for (skb = (queue)->prev, tmp = skb->prev;			\
+		     skb != (struct sk_buff *)(queue);				\
+		     skb = tmp, tmp = skb->prev)
+
+#define skb_queue_reverse_walk_from_safe(queue, skb, tmp)			\
+		for (tmp = skb->prev;						\
+		     skb != (struct sk_buff *)(queue);				\
+		     skb = tmp, tmp = skb->prev)
+
+static inline bool skb_has_frag_list(const struct sk_buff *skb)
+{
+	return skb_shinfo(skb)->frag_list != NULL;
+}
+
+static inline void skb_frag_list_init(struct sk_buff *skb)
+{
+	skb_shinfo(skb)->frag_list = NULL;
+}
+
+static inline void skb_frag_add_head(struct sk_buff *skb, struct sk_buff *frag)
+{
+	frag->next = skb_shinfo(skb)->frag_list;
+	skb_shinfo(skb)->frag_list = frag;
+}
+
+#define skb_walk_frags(skb, iter)	\
+	for (iter = skb_shinfo(skb)->frag_list; iter; iter = iter->next)
+
+extern struct sk_buff *__skb_recv_datagram(struct sock *sk, unsigned flags,
+					   int *peeked, int *off, int *err);
+extern struct sk_buff *skb_recv_datagram(struct sock *sk, unsigned flags,
+					 int noblock, int *err);
+extern unsigned int    datagram_poll(struct file *file, struct socket *sock,
+				     struct poll_table_struct *wait);
+extern int	       skb_copy_datagram_iovec(const struct sk_buff *from,
+					       int offset, struct iovec *to,
+					       int size);
+extern int	       skb_copy_and_csum_datagram_iovec(struct sk_buff *skb,
+							int hlen,
+							struct iovec *iov);
+extern int	       skb_copy_datagram_from_iovec(struct sk_buff *skb,
+						    int offset,
+						    const struct iovec *from,
+						    int from_offset,
+						    int len);
+extern int	       skb_copy_datagram_const_iovec(const struct sk_buff *from,
+						     int offset,
+						     const struct iovec *to,
+						     int to_offset,
+						     int size);
+extern void	       skb_free_datagram(struct sock *sk, struct sk_buff *skb);
+extern void	       skb_free_datagram_locked(struct sock *sk,
+						struct sk_buff *skb);
+extern int	       skb_kill_datagram(struct sock *sk, struct sk_buff *skb,
+					 unsigned int flags);
+extern __wsum	       skb_checksum(const struct sk_buff *skb, int offset,
+				    int len, __wsum csum);
+extern int	       skb_copy_bits(const struct sk_buff *skb, int offset,
+				     void *to, int len);
+extern int	       skb_store_bits(struct sk_buff *skb, int offset,
+				      const void *from, int len);
+extern __wsum	       skb_copy_and_csum_bits(const struct sk_buff *skb,
+					      int offset, u8 *to, int len,
+					      __wsum csum);
+extern int             skb_splice_bits(struct sk_buff *skb,
+						unsigned int offset,
+						struct pipe_inode_info *pipe,
+						unsigned int len,
+						unsigned int flags);
+extern void	       skb_copy_and_csum_dev(const struct sk_buff *skb, u8 *to);
+extern void	       skb_split(struct sk_buff *skb,
+				 struct sk_buff *skb1, const u32 len);
+extern int	       skb_shift(struct sk_buff *tgt, struct sk_buff *skb,
+				 int shiftlen);
+
+extern struct sk_buff *skb_segment(struct sk_buff *skb,
+				   netdev_features_t features);
+
+static inline void *skb_header_pointer(const struct sk_buff *skb, int offset,
+				       int len, void *buffer)
+{
+	int hlen = skb_headlen(skb);
+
+	if (hlen - offset >= len)
+		return skb->data + offset;
+
+	if (skb_copy_bits(skb, offset, buffer, len) < 0)
+		return NULL;
+
+	return buffer;
+}
+
+static inline void skb_copy_from_linear_data(const struct sk_buff *skb,
+					     void *to,
+					     const unsigned int len)
+{
+	memcpy(to, skb->data, len);
+}
+
+static inline void skb_copy_from_linear_data_offset(const struct sk_buff *skb,
+						    const int offset, void *to,
+						    const unsigned int len)
+{
+	memcpy(to, skb->data + offset, len);
+}
+
+static inline void skb_copy_to_linear_data(struct sk_buff *skb,
+					   const void *from,
+					   const unsigned int len)
+{
+	memcpy(skb->data, from, len);
+}
+
+static inline void skb_copy_to_linear_data_offset(struct sk_buff *skb,
+						  const int offset,
+						  const void *from,
+						  const unsigned int len)
+{
+	memcpy(skb->data + offset, from, len);
+}
+
+extern void skb_init(void);
+
+static inline ktime_t skb_get_ktime(const struct sk_buff *skb)
+{
+	return skb->tstamp;
+}
+
+/**
+ *	skb_get_timestamp - get timestamp from a skb
+ *	@skb: skb to get stamp from
+ *	@stamp: pointer to struct timeval to store stamp in
+ *
+ *	Timestamps are stored in the skb as offsets to a base timestamp.
+ *	This function converts the offset back to a struct timeval and stores
+ *	it in stamp.
+ */
+static inline void skb_get_timestamp(const struct sk_buff *skb,
+				     struct timeval *stamp)
+{
+	*stamp = ktime_to_timeval(skb->tstamp);
+}
+
+static inline void skb_get_timestampns(const struct sk_buff *skb,
+				       struct timespec *stamp)
+{
+	*stamp = ktime_to_timespec(skb->tstamp);
+}
+
+static inline void __net_timestamp(struct sk_buff *skb)
+{
+	skb->tstamp = ktime_get_real();
+}
+
+static inline ktime_t net_timedelta(ktime_t t)
+{
+	return ktime_sub(ktime_get_real(), t);
+}
+
+static inline ktime_t net_invalid_timestamp(void)
+{
+	return ktime_set(0, 0);
+}
+
+extern void skb_timestamping_init(void);
+
+#ifdef CONFIG_NETWORK_PHY_TIMESTAMPING
+
+extern void skb_clone_tx_timestamp(struct sk_buff *skb);
+extern bool skb_defer_rx_timestamp(struct sk_buff *skb);
+
+#else /* CONFIG_NETWORK_PHY_TIMESTAMPING */
+
+static inline void skb_clone_tx_timestamp(struct sk_buff *skb)
+{
+}
+
+static inline bool skb_defer_rx_timestamp(struct sk_buff *skb)
+{
+	return false;
+}
+
+#endif /* !CONFIG_NETWORK_PHY_TIMESTAMPING */
+
+/**
+ * skb_complete_tx_timestamp() - deliver cloned skb with tx timestamps
+ *
+ * PHY drivers may accept clones of transmitted packets for
+ * timestamping via their phy_driver.txtstamp method. These drivers
+ * must call this function to return the skb back to the stack, with
+ * or without a timestamp.
+ *
+ * @skb: clone of the the original outgoing packet
+ * @hwtstamps: hardware time stamps, may be NULL if not available
+ *
+ */
+void skb_complete_tx_timestamp(struct sk_buff *skb,
+			       struct skb_shared_hwtstamps *hwtstamps);
+
+/**
+ * skb_tstamp_tx - queue clone of skb with send time stamps
+ * @orig_skb:	the original outgoing packet
+ * @hwtstamps:	hardware time stamps, may be NULL if not available
+ *
+ * If the skb has a socket associated, then this function clones the
+ * skb (thus sharing the actual data and optional structures), stores
+ * the optional hardware time stamping information (if non NULL) or
+ * generates a software time stamp (otherwise), then queues the clone
+ * to the error queue of the socket.  Errors are silently ignored.
+ */
+extern void skb_tstamp_tx(struct sk_buff *orig_skb,
+			struct skb_shared_hwtstamps *hwtstamps);
+
+static inline void sw_tx_timestamp(struct sk_buff *skb)
+{
+	if (skb_shinfo(skb)->tx_flags & SKBTX_SW_TSTAMP &&
+	    !(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS))
+		skb_tstamp_tx(skb, NULL);
+}
+
+/**
+ * skb_tx_timestamp() - Driver hook for transmit timestamping
+ *
+ * Ethernet MAC Drivers should call this function in their hard_xmit()
+ * function immediately before giving the sk_buff to the MAC hardware.
+ *
+ * @skb: A socket buffer.
+ */
+static inline void skb_tx_timestamp(struct sk_buff *skb)
+{
+	skb_clone_tx_timestamp(skb);
+	sw_tx_timestamp(skb);
+}
+
+/**
+ * skb_complete_wifi_ack - deliver skb with wifi status
+ *
+ * @skb: the original outgoing packet
+ * @acked: ack status
+ *
+ */
+void skb_complete_wifi_ack(struct sk_buff *skb, bool acked);
+
+extern __sum16 __skb_checksum_complete_head(struct sk_buff *skb, int len);
+extern __sum16 __skb_checksum_complete(struct sk_buff *skb);
+
+static inline int skb_csum_unnecessary(const struct sk_buff *skb)
+{
+	return skb->ip_summed & CHECKSUM_UNNECESSARY;
+}
+
+/**
+ *	skb_checksum_complete - Calculate checksum of an entire packet
+ *	@skb: packet to process
+ *
+ *	This function calculates the checksum over the entire packet plus
+ *	the value of skb->csum.  The latter can be used to supply the
+ *	checksum of a pseudo header as used by TCP/UDP.  It returns the
+ *	checksum.
+ *
+ *	For protocols that contain complete checksums such as ICMP/TCP/UDP,
+ *	this function can be used to verify that checksum on received
+ *	packets.  In that case the function should return zero if the
+ *	checksum is correct.  In particular, this function will return zero
+ *	if skb->ip_summed is CHECKSUM_UNNECESSARY which indicates that the
+ *	hardware has already verified the correctness of the checksum.
+ */
+static inline __sum16 skb_checksum_complete(struct sk_buff *skb)
+{
+	return skb_csum_unnecessary(skb) ?
+	       0 : __skb_checksum_complete(skb);
+}
+
+#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
+extern void nf_conntrack_destroy(struct nf_conntrack *nfct);
+static inline void nf_conntrack_put(struct nf_conntrack *nfct)
+{
+	if (nfct && atomic_dec_and_test(&nfct->use))
+		nf_conntrack_destroy(nfct);
+}
+static inline void nf_conntrack_get(struct nf_conntrack *nfct)
+{
+	if (nfct)
+		atomic_inc(&nfct->use);
+}
+#endif
+#ifdef NET_SKBUFF_NF_DEFRAG_NEEDED
+static inline void nf_conntrack_get_reasm(struct sk_buff *skb)
+{
+	if (skb)
+		atomic_inc(&skb->users);
+}
+static inline void nf_conntrack_put_reasm(struct sk_buff *skb)
+{
+	if (skb)
+		kfree_skb(skb);
+}
+#endif
+#ifdef CONFIG_BRIDGE_NETFILTER
+static inline void nf_bridge_put(struct nf_bridge_info *nf_bridge)
+{
+	if (nf_bridge && atomic_dec_and_test(&nf_bridge->use))
+		kfree(nf_bridge);
+}
+static inline void nf_bridge_get(struct nf_bridge_info *nf_bridge)
+{
+	if (nf_bridge)
+		atomic_inc(&nf_bridge->use);
+}
+#endif /* CONFIG_BRIDGE_NETFILTER */
+static inline void nf_reset(struct sk_buff *skb)
+{
+#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
+	nf_conntrack_put(skb->nfct);
+	skb->nfct = NULL;
+#endif
+#ifdef NET_SKBUFF_NF_DEFRAG_NEEDED
+	nf_conntrack_put_reasm(skb->nfct_reasm);
+	skb->nfct_reasm = NULL;
+#endif
+#ifdef CONFIG_BRIDGE_NETFILTER
+	nf_bridge_put(skb->nf_bridge);
+	skb->nf_bridge = NULL;
+#endif
+}
+
+/* Note: This doesn't put any conntrack and bridge info in dst. */
+static inline void __nf_copy(struct sk_buff *dst, const struct sk_buff *src)
+{
+#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
+	dst->nfct = src->nfct;
+	nf_conntrack_get(src->nfct);
+	dst->nfctinfo = src->nfctinfo;
+#endif
+#ifdef NET_SKBUFF_NF_DEFRAG_NEEDED
+	dst->nfct_reasm = src->nfct_reasm;
+	nf_conntrack_get_reasm(src->nfct_reasm);
+#endif
+#ifdef CONFIG_BRIDGE_NETFILTER
+	dst->nf_bridge  = src->nf_bridge;
+	nf_bridge_get(src->nf_bridge);
+#endif
+}
+
+static inline void nf_copy(struct sk_buff *dst, const struct sk_buff *src)
+{
+#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
+	nf_conntrack_put(dst->nfct);
+#endif
+#ifdef NET_SKBUFF_NF_DEFRAG_NEEDED
+	nf_conntrack_put_reasm(dst->nfct_reasm);
+#endif
+#ifdef CONFIG_BRIDGE_NETFILTER
+	nf_bridge_put(dst->nf_bridge);
+#endif
+	__nf_copy(dst, src);
+}
+
+#ifdef CONFIG_NETWORK_SECMARK
+static inline void skb_copy_secmark(struct sk_buff *to, const struct sk_buff *from)
+{
+	to->secmark = from->secmark;
+}
+
+static inline void skb_init_secmark(struct sk_buff *skb)
+{
+	skb->secmark = 0;
+}
+#else
+static inline void skb_copy_secmark(struct sk_buff *to, const struct sk_buff *from)
+{ }
+
+static inline void skb_init_secmark(struct sk_buff *skb)
+{ }
+#endif
+
+static inline void skb_set_queue_mapping(struct sk_buff *skb, u16 queue_mapping)
+{
+	skb->queue_mapping = queue_mapping;
+}
+
+static inline u16 skb_get_queue_mapping(const struct sk_buff *skb)
+{
+	return skb->queue_mapping;
+}
+
+static inline void skb_copy_queue_mapping(struct sk_buff *to, const struct sk_buff *from)
+{
+	to->queue_mapping = from->queue_mapping;
+}
+
+static inline void skb_record_rx_queue(struct sk_buff *skb, u16 rx_queue)
+{
+	skb->queue_mapping = rx_queue + 1;
+}
+
+static inline u16 skb_get_rx_queue(const struct sk_buff *skb)
+{
+	return skb->queue_mapping - 1;
+}
+
+static inline bool skb_rx_queue_recorded(const struct sk_buff *skb)
+{
+	return skb->queue_mapping != 0;
+}
+
+extern u16 __skb_tx_hash(const struct net_device *dev,
+			 const struct sk_buff *skb,
+			 unsigned int num_tx_queues);
+
+#ifdef CONFIG_XFRM
+static inline struct sec_path *skb_sec_path(struct sk_buff *skb)
+{
+	return skb->sp;
+}
+#else
+static inline struct sec_path *skb_sec_path(struct sk_buff *skb)
+{
+	return NULL;
+}
+#endif
+
+static inline bool skb_is_gso(const struct sk_buff *skb)
+{
+	return skb_shinfo(skb)->gso_size;
+}
+
+static inline bool skb_is_gso_v6(const struct sk_buff *skb)
+{
+	return skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6;
+}
+
+extern void __skb_warn_lro_forwarding(const struct sk_buff *skb);
+
+static inline bool skb_warn_if_lro(const struct sk_buff *skb)
+{
+	/* LRO sets gso_size but not gso_type, whereas if GSO is really
+	 * wanted then gso_type will be set. */
+	const struct skb_shared_info *shinfo = skb_shinfo(skb);
+
+	if (skb_is_nonlinear(skb) && shinfo->gso_size != 0 &&
+	    unlikely(shinfo->gso_type == 0)) {
+		__skb_warn_lro_forwarding(skb);
+		return true;
+	}
+	return false;
+}
+
+static inline void skb_forward_csum(struct sk_buff *skb)
+{
+	/* Unfortunately we don't support this one.  Any brave souls? */
+	if (skb->ip_summed == CHECKSUM_COMPLETE)
+		skb->ip_summed = CHECKSUM_NONE;
+}
+
+/**
+ * skb_checksum_none_assert - make sure skb ip_summed is CHECKSUM_NONE
+ * @skb: skb to check
+ *
+ * fresh skbs have their ip_summed set to CHECKSUM_NONE.
+ * Instead of forcing ip_summed to CHECKSUM_NONE, we can
+ * use this helper, to document places where we make this assertion.
+ */
+static inline void skb_checksum_none_assert(const struct sk_buff *skb)
+{
+#ifdef DEBUG
+	BUG_ON(skb->ip_summed != CHECKSUM_NONE);
+#endif
+}
+
+bool skb_partial_csum_set(struct sk_buff *skb, u16 start, u16 off);
+
+static inline bool skb_is_recycleable(const struct sk_buff *skb, int skb_size)
+{
+	if (irqs_disabled())
+		return false;
+
+	if (skb_shinfo(skb)->tx_flags & SKBTX_DEV_ZEROCOPY)
+		return false;
+
+	if (skb_is_nonlinear(skb) || skb->fclone != SKB_FCLONE_UNAVAILABLE)
+		return false;
+
+	skb_size = SKB_DATA_ALIGN(skb_size + NET_SKB_PAD);
+	if (skb_end_pointer(skb) - skb->head < skb_size)
+		return false;
+
+	if (skb_shared(skb) || skb_cloned(skb))
+		return false;
+
+	return true;
+}
+#endif	/* __KERNEL__ */
+#endif	/* _LINUX_SKBUFF_H */
diff --git a/include/linux/slab.h b/include/linux/slab.h
new file mode 100644
index 00000000..a595dce6
--- /dev/null
+++ b/include/linux/slab.h
@@ -0,0 +1,367 @@
+/*
+ * Written by Mark Hemment, 1996 (markhe@nextd.demon.co.uk).
+ *
+ * (C) SGI 2006, Christoph Lameter
+ * 	Cleaned up and restructured to ease the addition of alternative
+ * 	implementations of SLAB allocators.
+ */
+
+#ifndef _LINUX_SLAB_H
+#define	_LINUX_SLAB_H
+
+#include <linux/gfp.h>
+#include <linux/types.h>
+
+/*
+ * Flags to pass to kmem_cache_create().
+ * The ones marked DEBUG are only valid if CONFIG_SLAB_DEBUG is set.
+ */
+#define SLAB_DEBUG_FREE		0x00000100UL	/* DEBUG: Perform (expensive) checks on free */
+#define SLAB_RED_ZONE		0x00000400UL	/* DEBUG: Red zone objs in a cache */
+#define SLAB_POISON		0x00000800UL	/* DEBUG: Poison objects */
+#define SLAB_HWCACHE_ALIGN	0x00002000UL	/* Align objs on cache lines */
+#define SLAB_CACHE_DMA		0x00004000UL	/* Use GFP_DMA memory */
+#define SLAB_STORE_USER		0x00010000UL	/* DEBUG: Store the last owner for bug hunting */
+#define SLAB_PANIC		0x00040000UL	/* Panic if kmem_cache_create() fails */
+/*
+ * SLAB_DESTROY_BY_RCU - **WARNING** READ THIS!
+ *
+ * This delays freeing the SLAB page by a grace period, it does _NOT_
+ * delay object freeing. This means that if you do kmem_cache_free()
+ * that memory location is free to be reused at any time. Thus it may
+ * be possible to see another object there in the same RCU grace period.
+ *
+ * This feature only ensures the memory location backing the object
+ * stays valid, the trick to using this is relying on an independent
+ * object validation pass. Something like:
+ *
+ *  rcu_read_lock()
+ * again:
+ *  obj = lockless_lookup(key);
+ *  if (obj) {
+ *    if (!try_get_ref(obj)) // might fail for free objects
+ *      goto again;
+ *
+ *    if (obj->key != key) { // not the object we expected
+ *      put_ref(obj);
+ *      goto again;
+ *    }
+ *  }
+ *  rcu_read_unlock();
+ *
+ * See also the comment on struct slab_rcu in mm/slab.c.
+ */
+#define SLAB_DESTROY_BY_RCU	0x00080000UL	/* Defer freeing slabs to RCU */
+#define SLAB_MEM_SPREAD		0x00100000UL	/* Spread some memory over cpuset */
+#define SLAB_TRACE		0x00200000UL	/* Trace allocations and frees */
+
+/* Flag to prevent checks on free */
+#ifdef CONFIG_DEBUG_OBJECTS
+# define SLAB_DEBUG_OBJECTS	0x00400000UL
+#else
+# define SLAB_DEBUG_OBJECTS	0x00000000UL
+#endif
+
+#define SLAB_NOLEAKTRACE	0x00800000UL	/* Avoid kmemleak tracing */
+
+/* Don't track use of uninitialized memory */
+#ifdef CONFIG_KMEMCHECK
+# define SLAB_NOTRACK		0x01000000UL
+#else
+# define SLAB_NOTRACK		0x00000000UL
+#endif
+#ifdef CONFIG_FAILSLAB
+# define SLAB_FAILSLAB		0x02000000UL	/* Fault injection mark */
+#else
+# define SLAB_FAILSLAB		0x00000000UL
+#endif
+
+/* The following flags affect the page allocator grouping pages by mobility */
+#define SLAB_RECLAIM_ACCOUNT	0x00020000UL		/* Objects are reclaimable */
+#define SLAB_TEMPORARY		SLAB_RECLAIM_ACCOUNT	/* Objects are short-lived */
+/*
+ * ZERO_SIZE_PTR will be returned for zero sized kmalloc requests.
+ *
+ * Dereferencing ZERO_SIZE_PTR will lead to a distinct access fault.
+ *
+ * ZERO_SIZE_PTR can be passed to kfree though in the same way that NULL can.
+ * Both make kfree a no-op.
+ */
+#define ZERO_SIZE_PTR ((void *)16)
+
+#define ZERO_OR_NULL_PTR(x) ((unsigned long)(x) <= \
+				(unsigned long)ZERO_SIZE_PTR)
+
+/*
+ * struct kmem_cache related prototypes
+ */
+void __init kmem_cache_init(void);
+int slab_is_available(void);
+
+struct kmem_cache *kmem_cache_create(const char *, size_t, size_t,
+			unsigned long,
+			void (*)(void *));
+void kmem_cache_destroy(struct kmem_cache *);
+int kmem_cache_shrink(struct kmem_cache *);
+void kmem_cache_free(struct kmem_cache *, void *);
+unsigned int kmem_cache_size(struct kmem_cache *);
+
+/*
+ * Please use this macro to create slab caches. Simply specify the
+ * name of the structure and maybe some flags that are listed above.
+ *
+ * The alignment of the struct determines object alignment. If you
+ * f.e. add ____cacheline_aligned_in_smp to the struct declaration
+ * then the objects will be properly aligned in SMP configurations.
+ */
+#define KMEM_CACHE(__struct, __flags) kmem_cache_create(#__struct,\
+		sizeof(struct __struct), __alignof__(struct __struct),\
+		(__flags), NULL)
+
+/*
+ * The largest kmalloc size supported by the slab allocators is
+ * 32 megabyte (2^25) or the maximum allocatable page order if that is
+ * less than 32 MB.
+ *
+ * WARNING: Its not easy to increase this value since the allocators have
+ * to do various tricks to work around compiler limitations in order to
+ * ensure proper constant folding.
+ */
+#define KMALLOC_SHIFT_HIGH	((MAX_ORDER + PAGE_SHIFT - 1) <= 25 ? \
+				(MAX_ORDER + PAGE_SHIFT - 1) : 25)
+
+#define KMALLOC_MAX_SIZE	(1UL << KMALLOC_SHIFT_HIGH)
+#define KMALLOC_MAX_ORDER	(KMALLOC_SHIFT_HIGH - PAGE_SHIFT)
+
+/*
+ * Some archs want to perform DMA into kmalloc caches and need a guaranteed
+ * alignment larger than the alignment of a 64-bit integer.
+ * Setting ARCH_KMALLOC_MINALIGN in arch headers allows that.
+ */
+#ifdef ARCH_DMA_MINALIGN
+#define ARCH_KMALLOC_MINALIGN ARCH_DMA_MINALIGN
+#else
+#define ARCH_KMALLOC_MINALIGN __alignof__(unsigned long long)
+#endif
+
+/*
+ * Setting ARCH_SLAB_MINALIGN in arch headers allows a different alignment.
+ * Intended for arches that get misalignment faults even for 64 bit integer
+ * aligned buffers.
+ */
+#ifndef ARCH_SLAB_MINALIGN
+#define ARCH_SLAB_MINALIGN __alignof__(unsigned long long)
+#endif
+
+/*
+ * Common kmalloc functions provided by all allocators
+ */
+void * __must_check __krealloc(const void *, size_t, gfp_t);
+void * __must_check krealloc(const void *, size_t, gfp_t);
+void kfree(const void *);
+void kzfree(const void *);
+size_t ksize(const void *);
+
+/*
+ * Allocator specific definitions. These are mainly used to establish optimized
+ * ways to convert kmalloc() calls to kmem_cache_alloc() invocations by
+ * selecting the appropriate general cache at compile time.
+ *
+ * Allocators must define at least:
+ *
+ *	kmem_cache_alloc()
+ *	__kmalloc()
+ *	kmalloc()
+ *
+ * Those wishing to support NUMA must also define:
+ *
+ *	kmem_cache_alloc_node()
+ *	kmalloc_node()
+ *
+ * See each allocator definition file for additional comments and
+ * implementation notes.
+ */
+#ifdef CONFIG_SLUB
+#include <linux/slub_def.h>
+#elif defined(CONFIG_SLOB)
+#include <linux/slob_def.h>
+#else
+#include <linux/slab_def.h>
+#endif
+
+/**
+ * kmalloc_array - allocate memory for an array.
+ * @n: number of elements.
+ * @size: element size.
+ * @flags: the type of memory to allocate.
+ *
+ * The @flags argument may be one of:
+ *
+ * %GFP_USER - Allocate memory on behalf of user.  May sleep.
+ *
+ * %GFP_KERNEL - Allocate normal kernel ram.  May sleep.
+ *
+ * %GFP_ATOMIC - Allocation will not sleep.  May use emergency pools.
+ *   For example, use this inside interrupt handlers.
+ *
+ * %GFP_HIGHUSER - Allocate pages from high memory.
+ *
+ * %GFP_NOIO - Do not do any I/O at all while trying to get memory.
+ *
+ * %GFP_NOFS - Do not make any fs calls while trying to get memory.
+ *
+ * %GFP_NOWAIT - Allocation will not sleep.
+ *
+ * %GFP_THISNODE - Allocate node-local memory only.
+ *
+ * %GFP_DMA - Allocation suitable for DMA.
+ *   Should only be used for kmalloc() caches. Otherwise, use a
+ *   slab created with SLAB_DMA.
+ *
+ * Also it is possible to set different flags by OR'ing
+ * in one or more of the following additional @flags:
+ *
+ * %__GFP_COLD - Request cache-cold pages instead of
+ *   trying to return cache-warm pages.
+ *
+ * %__GFP_HIGH - This allocation has high priority and may use emergency pools.
+ *
+ * %__GFP_NOFAIL - Indicate that this allocation is in no way allowed to fail
+ *   (think twice before using).
+ *
+ * %__GFP_NORETRY - If memory is not immediately available,
+ *   then give up at once.
+ *
+ * %__GFP_NOWARN - If allocation fails, don't issue any warnings.
+ *
+ * %__GFP_REPEAT - If allocation fails initially, try once more before failing.
+ *
+ * There are other flags available as well, but these are not intended
+ * for general use, and so are not documented here. For a full list of
+ * potential flags, always refer to linux/gfp.h.
+ */
+static inline void *kmalloc_array(size_t n, size_t size, gfp_t flags)
+{
+	if (size != 0 && n > ULONG_MAX / size)
+		return NULL;
+	return __kmalloc(n * size, flags);
+}
+
+/**
+ * kcalloc - allocate memory for an array. The memory is set to zero.
+ * @n: number of elements.
+ * @size: element size.
+ * @flags: the type of memory to allocate (see kmalloc).
+ */
+static inline void *kcalloc(size_t n, size_t size, gfp_t flags)
+{
+	return kmalloc_array(n, size, flags | __GFP_ZERO);
+}
+
+#if !defined(CONFIG_NUMA) && !defined(CONFIG_SLOB)
+/**
+ * kmalloc_node - allocate memory from a specific node
+ * @size: how many bytes of memory are required.
+ * @flags: the type of memory to allocate (see kcalloc).
+ * @node: node to allocate from.
+ *
+ * kmalloc() for non-local nodes, used to allocate from a specific node
+ * if available. Equivalent to kmalloc() in the non-NUMA single-node
+ * case.
+ */
+static inline void *kmalloc_node(size_t size, gfp_t flags, int node)
+{
+	return kmalloc(size, flags);
+}
+
+static inline void *__kmalloc_node(size_t size, gfp_t flags, int node)
+{
+	return __kmalloc(size, flags);
+}
+
+void *kmem_cache_alloc(struct kmem_cache *, gfp_t);
+
+static inline void *kmem_cache_alloc_node(struct kmem_cache *cachep,
+					gfp_t flags, int node)
+{
+	return kmem_cache_alloc(cachep, flags);
+}
+#endif /* !CONFIG_NUMA && !CONFIG_SLOB */
+
+/*
+ * kmalloc_track_caller is a special version of kmalloc that records the
+ * calling function of the routine calling it for slab leak tracking instead
+ * of just the calling function (confusing, eh?).
+ * It's useful when the call to kmalloc comes from a widely-used standard
+ * allocator where we care about the real place the memory allocation
+ * request comes from.
+ */
+#if defined(CONFIG_DEBUG_SLAB) || defined(CONFIG_SLUB) || \
+	(defined(CONFIG_SLAB) && defined(CONFIG_TRACING))
+extern void *__kmalloc_track_caller(size_t, gfp_t, unsigned long);
+#define kmalloc_track_caller(size, flags) \
+	__kmalloc_track_caller(size, flags, _RET_IP_)
+#else
+#define kmalloc_track_caller(size, flags) \
+	__kmalloc(size, flags)
+#endif /* DEBUG_SLAB */
+
+#ifdef CONFIG_NUMA
+/*
+ * kmalloc_node_track_caller is a special version of kmalloc_node that
+ * records the calling function of the routine calling it for slab leak
+ * tracking instead of just the calling function (confusing, eh?).
+ * It's useful when the call to kmalloc_node comes from a widely-used
+ * standard allocator where we care about the real place the memory
+ * allocation request comes from.
+ */
+#if defined(CONFIG_DEBUG_SLAB) || defined(CONFIG_SLUB) || \
+	(defined(CONFIG_SLAB) && defined(CONFIG_TRACING))
+extern void *__kmalloc_node_track_caller(size_t, gfp_t, int, unsigned long);
+#define kmalloc_node_track_caller(size, flags, node) \
+	__kmalloc_node_track_caller(size, flags, node, \
+			_RET_IP_)
+#else
+#define kmalloc_node_track_caller(size, flags, node) \
+	__kmalloc_node(size, flags, node)
+#endif
+
+#else /* CONFIG_NUMA */
+
+#define kmalloc_node_track_caller(size, flags, node) \
+	kmalloc_track_caller(size, flags)
+
+#endif /* CONFIG_NUMA */
+
+/*
+ * Shortcuts
+ */
+static inline void *kmem_cache_zalloc(struct kmem_cache *k, gfp_t flags)
+{
+	return kmem_cache_alloc(k, flags | __GFP_ZERO);
+}
+
+/**
+ * kzalloc - allocate memory. The memory is set to zero.
+ * @size: how many bytes of memory are required.
+ * @flags: the type of memory to allocate (see kmalloc).
+ */
+static inline void *kzalloc(size_t size, gfp_t flags)
+{
+	return kmalloc(size, flags | __GFP_ZERO);
+}
+
+/**
+ * kzalloc_node - allocate zeroed memory from a particular memory node.
+ * @size: how many bytes of memory are required.
+ * @flags: the type of memory to allocate (see kmalloc).
+ * @node: memory node from which to allocate
+ */
+static inline void *kzalloc_node(size_t size, gfp_t flags, int node)
+{
+	return kmalloc_node(size, flags | __GFP_ZERO, node);
+}
+
+void __init kmem_cache_init_late(void);
+
+#endif	/* _LINUX_SLAB_H */
diff --git a/include/linux/slab_def.h b/include/linux/slab_def.h
new file mode 100644
index 00000000..fbd1117f
--- /dev/null
+++ b/include/linux/slab_def.h
@@ -0,0 +1,215 @@
+#ifndef _LINUX_SLAB_DEF_H
+#define	_LINUX_SLAB_DEF_H
+
+/*
+ * Definitions unique to the original Linux SLAB allocator.
+ *
+ * What we provide here is a way to optimize the frequent kmalloc
+ * calls in the kernel by selecting the appropriate general cache
+ * if kmalloc was called with a size that can be established at
+ * compile time.
+ */
+
+#include <linux/init.h>
+#include <asm/page.h>		/* kmalloc_sizes.h needs PAGE_SIZE */
+#include <asm/cache.h>		/* kmalloc_sizes.h needs L1_CACHE_BYTES */
+#include <linux/compiler.h>
+
+/*
+ * struct kmem_cache
+ *
+ * manages a cache.
+ */
+
+struct kmem_cache {
+/* 1) Cache tunables. Protected by cache_chain_mutex */
+	unsigned int batchcount;
+	unsigned int limit;
+	unsigned int shared;
+
+	unsigned int buffer_size;
+	u32 reciprocal_buffer_size;
+/* 2) touched by every alloc & free from the backend */
+
+	unsigned int flags;		/* constant flags */
+	unsigned int num;		/* # of objs per slab */
+
+/* 3) cache_grow/shrink */
+	/* order of pgs per slab (2^n) */
+	unsigned int gfporder;
+
+	/* force GFP flags, e.g. GFP_DMA */
+	gfp_t gfpflags;
+
+	size_t colour;			/* cache colouring range */
+	unsigned int colour_off;	/* colour offset */
+	struct kmem_cache *slabp_cache;
+	unsigned int slab_size;
+	unsigned int dflags;		/* dynamic flags */
+
+	/* constructor func */
+	void (*ctor)(void *obj);
+
+/* 4) cache creation/removal */
+	const char *name;
+	struct list_head next;
+
+/* 5) statistics */
+#ifdef CONFIG_DEBUG_SLAB
+	unsigned long num_active;
+	unsigned long num_allocations;
+	unsigned long high_mark;
+	unsigned long grown;
+	unsigned long reaped;
+	unsigned long errors;
+	unsigned long max_freeable;
+	unsigned long node_allocs;
+	unsigned long node_frees;
+	unsigned long node_overflow;
+	atomic_t allochit;
+	atomic_t allocmiss;
+	atomic_t freehit;
+	atomic_t freemiss;
+
+	/*
+	 * If debugging is enabled, then the allocator can add additional
+	 * fields and/or padding to every object. buffer_size contains the total
+	 * object size including these internal fields, the following two
+	 * variables contain the offset to the user object and its size.
+	 */
+	int obj_offset;
+	int obj_size;
+#endif /* CONFIG_DEBUG_SLAB */
+
+/* 6) per-cpu/per-node data, touched during every alloc/free */
+	/*
+	 * We put array[] at the end of kmem_cache, because we want to size
+	 * this array to nr_cpu_ids slots instead of NR_CPUS
+	 * (see kmem_cache_init())
+	 * We still use [NR_CPUS] and not [1] or [0] because cache_cache
+	 * is statically defined, so we reserve the max number of cpus.
+	 */
+	struct kmem_list3 **nodelists;
+	struct array_cache *array[NR_CPUS];
+	/*
+	 * Do not add fields after array[]
+	 */
+};
+
+/* Size description struct for general caches. */
+struct cache_sizes {
+	size_t		 	cs_size;
+	struct kmem_cache	*cs_cachep;
+#ifdef CONFIG_ZONE_DMA
+	struct kmem_cache	*cs_dmacachep;
+#endif
+};
+extern struct cache_sizes malloc_sizes[];
+
+void *kmem_cache_alloc(struct kmem_cache *, gfp_t);
+void *__kmalloc(size_t size, gfp_t flags);
+
+#ifdef CONFIG_TRACING
+extern void *kmem_cache_alloc_trace(size_t size,
+				    struct kmem_cache *cachep, gfp_t flags);
+extern size_t slab_buffer_size(struct kmem_cache *cachep);
+#else
+static __always_inline void *
+kmem_cache_alloc_trace(size_t size, struct kmem_cache *cachep, gfp_t flags)
+{
+	return kmem_cache_alloc(cachep, flags);
+}
+static inline size_t slab_buffer_size(struct kmem_cache *cachep)
+{
+	return 0;
+}
+#endif
+
+static __always_inline void *kmalloc(size_t size, gfp_t flags)
+{
+	struct kmem_cache *cachep;
+	void *ret;
+
+	if (__builtin_constant_p(size)) {
+		int i = 0;
+
+		if (!size)
+			return ZERO_SIZE_PTR;
+
+#define CACHE(x) \
+		if (size <= x) \
+			goto found; \
+		else \
+			i++;
+#include <linux/kmalloc_sizes.h>
+#undef CACHE
+		return NULL;
+found:
+#ifdef CONFIG_ZONE_DMA
+		if (flags & GFP_DMA)
+			cachep = malloc_sizes[i].cs_dmacachep;
+		else
+#endif
+			cachep = malloc_sizes[i].cs_cachep;
+
+		ret = kmem_cache_alloc_trace(size, cachep, flags);
+
+		return ret;
+	}
+	return __kmalloc(size, flags);
+}
+
+#ifdef CONFIG_NUMA
+extern void *__kmalloc_node(size_t size, gfp_t flags, int node);
+extern void *kmem_cache_alloc_node(struct kmem_cache *, gfp_t flags, int node);
+
+#ifdef CONFIG_TRACING
+extern void *kmem_cache_alloc_node_trace(size_t size,
+					 struct kmem_cache *cachep,
+					 gfp_t flags,
+					 int nodeid);
+#else
+static __always_inline void *
+kmem_cache_alloc_node_trace(size_t size,
+			    struct kmem_cache *cachep,
+			    gfp_t flags,
+			    int nodeid)
+{
+	return kmem_cache_alloc_node(cachep, flags, nodeid);
+}
+#endif
+
+static __always_inline void *kmalloc_node(size_t size, gfp_t flags, int node)
+{
+	struct kmem_cache *cachep;
+
+	if (__builtin_constant_p(size)) {
+		int i = 0;
+
+		if (!size)
+			return ZERO_SIZE_PTR;
+
+#define CACHE(x) \
+		if (size <= x) \
+			goto found; \
+		else \
+			i++;
+#include <linux/kmalloc_sizes.h>
+#undef CACHE
+		return NULL;
+found:
+#ifdef CONFIG_ZONE_DMA
+		if (flags & GFP_DMA)
+			cachep = malloc_sizes[i].cs_dmacachep;
+		else
+#endif
+			cachep = malloc_sizes[i].cs_cachep;
+
+		return kmem_cache_alloc_node_trace(size, cachep, flags, node);
+	}
+	return __kmalloc_node(size, flags, node);
+}
+
+#endif	/* CONFIG_NUMA */
+
+#endif	/* _LINUX_SLAB_DEF_H */
diff --git a/include/linux/slob_def.h b/include/linux/slob_def.h
new file mode 100644
index 00000000..0ec00b39
--- /dev/null
+++ b/include/linux/slob_def.h
@@ -0,0 +1,37 @@
+#ifndef __LINUX_SLOB_DEF_H
+#define __LINUX_SLOB_DEF_H
+
+void *kmem_cache_alloc_node(struct kmem_cache *, gfp_t flags, int node);
+
+static __always_inline void *kmem_cache_alloc(struct kmem_cache *cachep,
+					      gfp_t flags)
+{
+	return kmem_cache_alloc_node(cachep, flags, -1);
+}
+
+void *__kmalloc_node(size_t size, gfp_t flags, int node);
+
+static __always_inline void *kmalloc_node(size_t size, gfp_t flags, int node)
+{
+	return __kmalloc_node(size, flags, node);
+}
+
+/**
+ * kmalloc - allocate memory
+ * @size: how many bytes of memory are required.
+ * @flags: the type of memory to allocate (see kcalloc).
+ *
+ * kmalloc is the normal method of allocating memory
+ * in the kernel.
+ */
+static __always_inline void *kmalloc(size_t size, gfp_t flags)
+{
+	return __kmalloc_node(size, flags, -1);
+}
+
+static __always_inline void *__kmalloc(size_t size, gfp_t flags)
+{
+	return kmalloc(size, flags);
+}
+
+#endif /* __LINUX_SLOB_DEF_H */
diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h
new file mode 100644
index 00000000..c2f8c8bc
--- /dev/null
+++ b/include/linux/slub_def.h
@@ -0,0 +1,319 @@
+#ifndef _LINUX_SLUB_DEF_H
+#define _LINUX_SLUB_DEF_H
+
+/*
+ * SLUB : A Slab allocator without object queues.
+ *
+ * (C) 2007 SGI, Christoph Lameter
+ */
+#include <linux/types.h>
+#include <linux/gfp.h>
+#include <linux/bug.h>
+#include <linux/workqueue.h>
+#include <linux/kobject.h>
+
+#include <linux/kmemleak.h>
+
+enum stat_item {
+	ALLOC_FASTPATH,		/* Allocation from cpu slab */
+	ALLOC_SLOWPATH,		/* Allocation by getting a new cpu slab */
+	FREE_FASTPATH,		/* Free to cpu slub */
+	FREE_SLOWPATH,		/* Freeing not to cpu slab */
+	FREE_FROZEN,		/* Freeing to frozen slab */
+	FREE_ADD_PARTIAL,	/* Freeing moves slab to partial list */
+	FREE_REMOVE_PARTIAL,	/* Freeing removes last object */
+	ALLOC_FROM_PARTIAL,	/* Cpu slab acquired from node partial list */
+	ALLOC_SLAB,		/* Cpu slab acquired from page allocator */
+	ALLOC_REFILL,		/* Refill cpu slab from slab freelist */
+	ALLOC_NODE_MISMATCH,	/* Switching cpu slab */
+	FREE_SLAB,		/* Slab freed to the page allocator */
+	CPUSLAB_FLUSH,		/* Abandoning of the cpu slab */
+	DEACTIVATE_FULL,	/* Cpu slab was full when deactivated */
+	DEACTIVATE_EMPTY,	/* Cpu slab was empty when deactivated */
+	DEACTIVATE_TO_HEAD,	/* Cpu slab was moved to the head of partials */
+	DEACTIVATE_TO_TAIL,	/* Cpu slab was moved to the tail of partials */
+	DEACTIVATE_REMOTE_FREES,/* Slab contained remotely freed objects */
+	DEACTIVATE_BYPASS,	/* Implicit deactivation */
+	ORDER_FALLBACK,		/* Number of times fallback was necessary */
+	CMPXCHG_DOUBLE_CPU_FAIL,/* Failure of this_cpu_cmpxchg_double */
+	CMPXCHG_DOUBLE_FAIL,	/* Number of times that cmpxchg double did not match */
+	CPU_PARTIAL_ALLOC,	/* Used cpu partial on alloc */
+	CPU_PARTIAL_FREE,	/* Refill cpu partial on free */
+	CPU_PARTIAL_NODE,	/* Refill cpu partial from node partial */
+	CPU_PARTIAL_DRAIN,	/* Drain cpu partial to node partial */
+	NR_SLUB_STAT_ITEMS };
+
+struct kmem_cache_cpu {
+	void **freelist;	/* Pointer to next available object */
+	unsigned long tid;	/* Globally unique transaction id */
+	struct page *page;	/* The slab from which we are allocating */
+	struct page *partial;	/* Partially allocated frozen slabs */
+	int node;		/* The node of the page (or -1 for debug) */
+#ifdef CONFIG_SLUB_STATS
+	unsigned stat[NR_SLUB_STAT_ITEMS];
+#endif
+};
+
+struct kmem_cache_node {
+	spinlock_t list_lock;	/* Protect partial list and nr_partial */
+	unsigned long nr_partial;
+	struct list_head partial;
+#ifdef CONFIG_SLUB_DEBUG
+	atomic_long_t nr_slabs;
+	atomic_long_t total_objects;
+	struct list_head full;
+#endif
+};
+
+/*
+ * Word size structure that can be atomically updated or read and that
+ * contains both the order and the number of objects that a slab of the
+ * given order would contain.
+ */
+struct kmem_cache_order_objects {
+	unsigned long x;
+};
+
+/*
+ * Slab cache management.
+ */
+struct kmem_cache {
+	struct kmem_cache_cpu __percpu *cpu_slab;
+	/* Used for retriving partial slabs etc */
+	unsigned long flags;
+	unsigned long min_partial;
+	int size;		/* The size of an object including meta data */
+	int objsize;		/* The size of an object without meta data */
+	int offset;		/* Free pointer offset. */
+	int cpu_partial;	/* Number of per cpu partial objects to keep around */
+	struct kmem_cache_order_objects oo;
+
+	/* Allocation and freeing of slabs */
+	struct kmem_cache_order_objects max;
+	struct kmem_cache_order_objects min;
+	gfp_t allocflags;	/* gfp flags to use on each alloc */
+	int refcount;		/* Refcount for slab cache destroy */
+	void (*ctor)(void *);
+	int inuse;		/* Offset to metadata */
+	int align;		/* Alignment */
+	int reserved;		/* Reserved bytes at the end of slabs */
+	const char *name;	/* Name (only for display!) */
+	struct list_head list;	/* List of slab caches */
+#ifdef CONFIG_SYSFS
+	struct kobject kobj;	/* For sysfs */
+#endif
+
+#ifdef CONFIG_NUMA
+	/*
+	 * Defragmentation by allocating from a remote node.
+	 */
+	int remote_node_defrag_ratio;
+#endif
+	struct kmem_cache_node *node[MAX_NUMNODES];
+};
+
+/*
+ * Kmalloc subsystem.
+ */
+#if defined(ARCH_DMA_MINALIGN) && ARCH_DMA_MINALIGN > 8
+#define KMALLOC_MIN_SIZE ARCH_DMA_MINALIGN
+#else
+#define KMALLOC_MIN_SIZE 8
+#endif
+
+#define KMALLOC_SHIFT_LOW ilog2(KMALLOC_MIN_SIZE)
+
+/*
+ * Maximum kmalloc object size handled by SLUB. Larger object allocations
+ * are passed through to the page allocator. The page allocator "fastpath"
+ * is relatively slow so we need this value sufficiently high so that
+ * performance critical objects are allocated through the SLUB fastpath.
+ *
+ * This should be dropped to PAGE_SIZE / 2 once the page allocator
+ * "fastpath" becomes competitive with the slab allocator fastpaths.
+ */
+#define SLUB_MAX_SIZE (2 * PAGE_SIZE)
+
+#define SLUB_PAGE_SHIFT (PAGE_SHIFT + 2)
+
+#ifdef CONFIG_ZONE_DMA
+#define SLUB_DMA __GFP_DMA
+#else
+/* Disable DMA functionality */
+#define SLUB_DMA (__force gfp_t)0
+#endif
+
+/*
+ * We keep the general caches in an array of slab caches that are used for
+ * 2^x bytes of allocations.
+ */
+extern struct kmem_cache *kmalloc_caches[SLUB_PAGE_SHIFT];
+
+/*
+ * Sorry that the following has to be that ugly but some versions of GCC
+ * have trouble with constant propagation and loops.
+ */
+static __always_inline int kmalloc_index(size_t size)
+{
+	if (!size)
+		return 0;
+
+	if (size <= KMALLOC_MIN_SIZE)
+		return KMALLOC_SHIFT_LOW;
+
+	if (KMALLOC_MIN_SIZE <= 32 && size > 64 && size <= 96)
+		return 1;
+	if (KMALLOC_MIN_SIZE <= 64 && size > 128 && size <= 192)
+		return 2;
+	if (size <=          8) return 3;
+	if (size <=         16) return 4;
+	if (size <=         32) return 5;
+	if (size <=         64) return 6;
+	if (size <=        128) return 7;
+	if (size <=        256) return 8;
+	if (size <=        512) return 9;
+	if (size <=       1024) return 10;
+	if (size <=   2 * 1024) return 11;
+	if (size <=   4 * 1024) return 12;
+/*
+ * The following is only needed to support architectures with a larger page
+ * size than 4k. We need to support 2 * PAGE_SIZE here. So for a 64k page
+ * size we would have to go up to 128k.
+ */
+	if (size <=   8 * 1024) return 13;
+	if (size <=  16 * 1024) return 14;
+	if (size <=  32 * 1024) return 15;
+	if (size <=  64 * 1024) return 16;
+	if (size <= 128 * 1024) return 17;
+	if (size <= 256 * 1024) return 18;
+	if (size <= 512 * 1024) return 19;
+	if (size <= 1024 * 1024) return 20;
+	if (size <=  2 * 1024 * 1024) return 21;
+	BUG();
+	return -1; /* Will never be reached */
+
+/*
+ * What we really wanted to do and cannot do because of compiler issues is:
+ *	int i;
+ *	for (i = KMALLOC_SHIFT_LOW; i <= KMALLOC_SHIFT_HIGH; i++)
+ *		if (size <= (1 << i))
+ *			return i;
+ */
+}
+
+/*
+ * Find the slab cache for a given combination of allocation flags and size.
+ *
+ * This ought to end up with a global pointer to the right cache
+ * in kmalloc_caches.
+ */
+static __always_inline struct kmem_cache *kmalloc_slab(size_t size)
+{
+	int index = kmalloc_index(size);
+
+	if (index == 0)
+		return NULL;
+
+	return kmalloc_caches[index];
+}
+
+void *kmem_cache_alloc(struct kmem_cache *, gfp_t);
+void *__kmalloc(size_t size, gfp_t flags);
+
+static __always_inline void *
+kmalloc_order(size_t size, gfp_t flags, unsigned int order)
+{
+	void *ret = (void *) __get_free_pages(flags | __GFP_COMP, order);
+	kmemleak_alloc(ret, size, 1, flags);
+	return ret;
+}
+
+/**
+ * Calling this on allocated memory will check that the memory
+ * is expected to be in use, and print warnings if not.
+ */
+#ifdef CONFIG_SLUB_DEBUG
+extern bool verify_mem_not_deleted(const void *x);
+#else
+static inline bool verify_mem_not_deleted(const void *x)
+{
+	return true;
+}
+#endif
+
+#ifdef CONFIG_TRACING
+extern void *
+kmem_cache_alloc_trace(struct kmem_cache *s, gfp_t gfpflags, size_t size);
+extern void *kmalloc_order_trace(size_t size, gfp_t flags, unsigned int order);
+#else
+static __always_inline void *
+kmem_cache_alloc_trace(struct kmem_cache *s, gfp_t gfpflags, size_t size)
+{
+	return kmem_cache_alloc(s, gfpflags);
+}
+
+static __always_inline void *
+kmalloc_order_trace(size_t size, gfp_t flags, unsigned int order)
+{
+	return kmalloc_order(size, flags, order);
+}
+#endif
+
+static __always_inline void *kmalloc_large(size_t size, gfp_t flags)
+{
+	unsigned int order = get_order(size);
+	return kmalloc_order_trace(size, flags, order);
+}
+
+static __always_inline void *kmalloc(size_t size, gfp_t flags)
+{
+	if (__builtin_constant_p(size)) {
+		if (size > SLUB_MAX_SIZE)
+			return kmalloc_large(size, flags);
+
+		if (!(flags & SLUB_DMA)) {
+			struct kmem_cache *s = kmalloc_slab(size);
+
+			if (!s)
+				return ZERO_SIZE_PTR;
+
+			return kmem_cache_alloc_trace(s, flags, size);
+		}
+	}
+	return __kmalloc(size, flags);
+}
+
+#ifdef CONFIG_NUMA
+void *__kmalloc_node(size_t size, gfp_t flags, int node);
+void *kmem_cache_alloc_node(struct kmem_cache *, gfp_t flags, int node);
+
+#ifdef CONFIG_TRACING
+extern void *kmem_cache_alloc_node_trace(struct kmem_cache *s,
+					   gfp_t gfpflags,
+					   int node, size_t size);
+#else
+static __always_inline void *
+kmem_cache_alloc_node_trace(struct kmem_cache *s,
+			      gfp_t gfpflags,
+			      int node, size_t size)
+{
+	return kmem_cache_alloc_node(s, gfpflags, node);
+}
+#endif
+
+static __always_inline void *kmalloc_node(size_t size, gfp_t flags, int node)
+{
+	if (__builtin_constant_p(size) &&
+		size <= SLUB_MAX_SIZE && !(flags & SLUB_DMA)) {
+			struct kmem_cache *s = kmalloc_slab(size);
+
+		if (!s)
+			return ZERO_SIZE_PTR;
+
+		return kmem_cache_alloc_node_trace(s, flags, node, size);
+	}
+	return __kmalloc_node(size, flags, node);
+}
+#endif
+
+#endif /* _LINUX_SLUB_DEF_H */
diff --git a/include/linux/sm501-regs.h b/include/linux/sm501-regs.h
new file mode 100644
index 00000000..67ed2c54
--- /dev/null
+++ b/include/linux/sm501-regs.h
@@ -0,0 +1,388 @@
+/* sm501-regs.h
+ *
+ * Copyright 2006 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Silicon Motion SM501 register definitions
+*/
+
+/* System Configuration area */
+/* System config base */
+#define SM501_SYS_CONFIG		(0x000000)
+
+/* config 1 */
+#define SM501_SYSTEM_CONTROL 		(0x000000)
+
+#define SM501_SYSCTRL_PANEL_TRISTATE	(1<<0)
+#define SM501_SYSCTRL_MEM_TRISTATE	(1<<1)
+#define SM501_SYSCTRL_CRT_TRISTATE	(1<<2)
+
+#define SM501_SYSCTRL_PCI_SLAVE_BURST_MASK (3<<4)
+#define SM501_SYSCTRL_PCI_SLAVE_BURST_1	(0<<4)
+#define SM501_SYSCTRL_PCI_SLAVE_BURST_2	(1<<4)
+#define SM501_SYSCTRL_PCI_SLAVE_BURST_4	(2<<4)
+#define SM501_SYSCTRL_PCI_SLAVE_BURST_8	(3<<4)
+
+#define SM501_SYSCTRL_PCI_CLOCK_RUN_EN	(1<<6)
+#define SM501_SYSCTRL_PCI_RETRY_DISABLE	(1<<7)
+#define SM501_SYSCTRL_PCI_SUBSYS_LOCK	(1<<11)
+#define SM501_SYSCTRL_PCI_BURST_READ_EN	(1<<15)
+
+#define SM501_SYSCTRL_2D_ENGINE_STATUS	(1<<19)
+
+/* miscellaneous control */
+
+#define SM501_MISC_CONTROL		(0x000004)
+
+#define SM501_MISC_BUS_SH		(0x0)
+#define SM501_MISC_BUS_PCI		(0x1)
+#define SM501_MISC_BUS_XSCALE		(0x2)
+#define SM501_MISC_BUS_NEC		(0x6)
+#define SM501_MISC_BUS_MASK		(0x7)
+
+#define SM501_MISC_VR_62MB		(1<<3)
+#define SM501_MISC_CDR_RESET		(1<<7)
+#define SM501_MISC_USB_LB		(1<<8)
+#define SM501_MISC_USB_SLAVE		(1<<9)
+#define SM501_MISC_BL_1			(1<<10)
+#define SM501_MISC_MC			(1<<11)
+#define SM501_MISC_DAC_POWER		(1<<12)
+#define SM501_MISC_IRQ_INVERT		(1<<16)
+#define SM501_MISC_SH			(1<<17)
+
+#define SM501_MISC_HOLD_EMPTY		(0<<18)
+#define SM501_MISC_HOLD_8		(1<<18)
+#define SM501_MISC_HOLD_16		(2<<18)
+#define SM501_MISC_HOLD_24		(3<<18)
+#define SM501_MISC_HOLD_32		(4<<18)
+#define SM501_MISC_HOLD_MASK		(7<<18)
+
+#define SM501_MISC_FREQ_12		(1<<24)
+#define SM501_MISC_PNL_24BIT		(1<<25)
+#define SM501_MISC_8051_LE		(1<<26)
+
+
+
+#define SM501_GPIO31_0_CONTROL		(0x000008)
+#define SM501_GPIO63_32_CONTROL		(0x00000C)
+#define SM501_DRAM_CONTROL		(0x000010)
+
+/* command list */
+#define SM501_ARBTRTN_CONTROL		(0x000014)
+
+/* command list */
+#define SM501_COMMAND_LIST_STATUS	(0x000024)
+
+/* interrupt debug */
+#define SM501_RAW_IRQ_STATUS		(0x000028)
+#define SM501_RAW_IRQ_CLEAR		(0x000028)
+#define SM501_IRQ_STATUS		(0x00002C)
+#define SM501_IRQ_MASK			(0x000030)
+#define SM501_DEBUG_CONTROL		(0x000034)
+
+/* power management */
+#define SM501_POWERMODE_P2X_SRC		(1<<29)
+#define SM501_POWERMODE_V2X_SRC		(1<<20)
+#define SM501_POWERMODE_M_SRC		(1<<12)
+#define SM501_POWERMODE_M1_SRC		(1<<4)
+
+#define SM501_CURRENT_GATE		(0x000038)
+#define SM501_CURRENT_CLOCK		(0x00003C)
+#define SM501_POWER_MODE_0_GATE		(0x000040)
+#define SM501_POWER_MODE_0_CLOCK	(0x000044)
+#define SM501_POWER_MODE_1_GATE		(0x000048)
+#define SM501_POWER_MODE_1_CLOCK	(0x00004C)
+#define SM501_SLEEP_MODE_GATE		(0x000050)
+#define SM501_POWER_MODE_CONTROL	(0x000054)
+
+/* power gates for units within the 501 */
+#define SM501_GATE_HOST			(0)
+#define SM501_GATE_MEMORY		(1)
+#define SM501_GATE_DISPLAY		(2)
+#define SM501_GATE_2D_ENGINE		(3)
+#define SM501_GATE_CSC			(4)
+#define SM501_GATE_ZVPORT		(5)
+#define SM501_GATE_GPIO			(6)
+#define SM501_GATE_UART0		(7)
+#define SM501_GATE_UART1		(8)
+#define SM501_GATE_SSP			(10)
+#define SM501_GATE_USB_HOST		(11)
+#define SM501_GATE_USB_GADGET		(12)
+#define SM501_GATE_UCONTROLLER		(17)
+#define SM501_GATE_AC97			(18)
+
+/* panel clock */
+#define SM501_CLOCK_P2XCLK		(24)
+/* crt clock */
+#define SM501_CLOCK_V2XCLK		(16)
+/* main clock */
+#define SM501_CLOCK_MCLK		(8)
+/* SDRAM controller clock */
+#define SM501_CLOCK_M1XCLK		(0)
+
+/* config 2 */
+#define SM501_PCI_MASTER_BASE		(0x000058)
+#define SM501_ENDIAN_CONTROL		(0x00005C)
+#define SM501_DEVICEID			(0x000060)
+/* 0x050100A0 */
+
+#define SM501_DEVICEID_SM501		(0x05010000)
+#define SM501_DEVICEID_IDMASK		(0xffff0000)
+#define SM501_DEVICEID_REVMASK		(0x000000ff)
+
+#define SM501_PLLCLOCK_COUNT		(0x000064)
+#define SM501_MISC_TIMING		(0x000068)
+#define SM501_CURRENT_SDRAM_CLOCK	(0x00006C)
+
+#define SM501_PROGRAMMABLE_PLL_CONTROL	(0x000074)
+
+/* GPIO base */
+#define SM501_GPIO			(0x010000)
+#define SM501_GPIO_DATA_LOW		(0x00)
+#define SM501_GPIO_DATA_HIGH		(0x04)
+#define SM501_GPIO_DDR_LOW		(0x08)
+#define SM501_GPIO_DDR_HIGH		(0x0C)
+#define SM501_GPIO_IRQ_SETUP		(0x10)
+#define SM501_GPIO_IRQ_STATUS		(0x14)
+#define SM501_GPIO_IRQ_RESET		(0x14)
+
+/* I2C controller base */
+#define SM501_I2C			(0x010040)
+#define SM501_I2C_BYTE_COUNT		(0x00)
+#define SM501_I2C_CONTROL		(0x01)
+#define SM501_I2C_STATUS		(0x02)
+#define SM501_I2C_RESET			(0x02)
+#define SM501_I2C_SLAVE_ADDRESS		(0x03)
+#define SM501_I2C_DATA			(0x04)
+
+/* SSP base */
+#define SM501_SSP			(0x020000)
+
+/* Uart 0 base */
+#define SM501_UART0			(0x030000)
+
+/* Uart 1 base */
+#define SM501_UART1			(0x030020)
+
+/* USB host port base */
+#define SM501_USB_HOST			(0x040000)
+
+/* USB slave/gadget base */
+#define SM501_USB_GADGET		(0x060000)
+
+/* USB slave/gadget data port base */
+#define SM501_USB_GADGET_DATA		(0x070000)
+
+/* Display controller/video engine base */
+#define SM501_DC			(0x080000)
+
+/* common defines for the SM501 address registers */
+#define SM501_ADDR_FLIP			(1<<31)
+#define SM501_ADDR_EXT			(1<<27)
+#define SM501_ADDR_CS1			(1<<26)
+#define SM501_ADDR_MASK			(0x3f << 26)
+
+#define SM501_FIFO_MASK			(0x3 << 16)
+#define SM501_FIFO_1			(0x0 << 16)
+#define SM501_FIFO_3			(0x1 << 16)
+#define SM501_FIFO_7			(0x2 << 16)
+#define SM501_FIFO_11			(0x3 << 16)
+
+/* common registers for panel and the crt */
+#define SM501_OFF_DC_H_TOT		(0x000)
+#define SM501_OFF_DC_V_TOT		(0x008)
+#define SM501_OFF_DC_H_SYNC		(0x004)
+#define SM501_OFF_DC_V_SYNC		(0x00C)
+
+#define SM501_DC_PANEL_CONTROL		(0x000)
+
+#define SM501_DC_PANEL_CONTROL_FPEN	(1<<27)
+#define SM501_DC_PANEL_CONTROL_BIAS	(1<<26)
+#define SM501_DC_PANEL_CONTROL_DATA	(1<<25)
+#define SM501_DC_PANEL_CONTROL_VDD	(1<<24)
+#define SM501_DC_PANEL_CONTROL_DP	(1<<23)
+
+#define SM501_DC_PANEL_CONTROL_TFT_888	(0<<21)
+#define SM501_DC_PANEL_CONTROL_TFT_333	(1<<21)
+#define SM501_DC_PANEL_CONTROL_TFT_444	(2<<21)
+
+#define SM501_DC_PANEL_CONTROL_DE	(1<<20)
+
+#define SM501_DC_PANEL_CONTROL_LCD_TFT	(0<<18)
+#define SM501_DC_PANEL_CONTROL_LCD_STN8	(1<<18)
+#define SM501_DC_PANEL_CONTROL_LCD_STN12 (2<<18)
+
+#define SM501_DC_PANEL_CONTROL_CP	(1<<14)
+#define SM501_DC_PANEL_CONTROL_VSP	(1<<13)
+#define SM501_DC_PANEL_CONTROL_HSP	(1<<12)
+#define SM501_DC_PANEL_CONTROL_CK	(1<<9)
+#define SM501_DC_PANEL_CONTROL_TE	(1<<8)
+#define SM501_DC_PANEL_CONTROL_VPD	(1<<7)
+#define SM501_DC_PANEL_CONTROL_VP	(1<<6)
+#define SM501_DC_PANEL_CONTROL_HPD	(1<<5)
+#define SM501_DC_PANEL_CONTROL_HP	(1<<4)
+#define SM501_DC_PANEL_CONTROL_GAMMA	(1<<3)
+#define SM501_DC_PANEL_CONTROL_EN	(1<<2)
+
+#define SM501_DC_PANEL_CONTROL_8BPP	(0<<0)
+#define SM501_DC_PANEL_CONTROL_16BPP	(1<<0)
+#define SM501_DC_PANEL_CONTROL_32BPP	(2<<0)
+
+
+#define SM501_DC_PANEL_PANNING_CONTROL	(0x004)
+#define SM501_DC_PANEL_COLOR_KEY	(0x008)
+#define SM501_DC_PANEL_FB_ADDR		(0x00C)
+#define SM501_DC_PANEL_FB_OFFSET	(0x010)
+#define SM501_DC_PANEL_FB_WIDTH		(0x014)
+#define SM501_DC_PANEL_FB_HEIGHT	(0x018)
+#define SM501_DC_PANEL_TL_LOC		(0x01C)
+#define SM501_DC_PANEL_BR_LOC		(0x020)
+#define SM501_DC_PANEL_H_TOT		(0x024)
+#define SM501_DC_PANEL_H_SYNC		(0x028)
+#define SM501_DC_PANEL_V_TOT		(0x02C)
+#define SM501_DC_PANEL_V_SYNC		(0x030)
+#define SM501_DC_PANEL_CUR_LINE		(0x034)
+
+#define SM501_DC_VIDEO_CONTROL		(0x040)
+#define SM501_DC_VIDEO_FB0_ADDR		(0x044)
+#define SM501_DC_VIDEO_FB_WIDTH		(0x048)
+#define SM501_DC_VIDEO_FB0_LAST_ADDR	(0x04C)
+#define SM501_DC_VIDEO_TL_LOC		(0x050)
+#define SM501_DC_VIDEO_BR_LOC		(0x054)
+#define SM501_DC_VIDEO_SCALE		(0x058)
+#define SM501_DC_VIDEO_INIT_SCALE	(0x05C)
+#define SM501_DC_VIDEO_YUV_CONSTANTS	(0x060)
+#define SM501_DC_VIDEO_FB1_ADDR		(0x064)
+#define SM501_DC_VIDEO_FB1_LAST_ADDR	(0x068)
+
+#define SM501_DC_VIDEO_ALPHA_CONTROL	(0x080)
+#define SM501_DC_VIDEO_ALPHA_FB_ADDR	(0x084)
+#define SM501_DC_VIDEO_ALPHA_FB_OFFSET	(0x088)
+#define SM501_DC_VIDEO_ALPHA_FB_LAST_ADDR	(0x08C)
+#define SM501_DC_VIDEO_ALPHA_TL_LOC	(0x090)
+#define SM501_DC_VIDEO_ALPHA_BR_LOC	(0x094)
+#define SM501_DC_VIDEO_ALPHA_SCALE	(0x098)
+#define SM501_DC_VIDEO_ALPHA_INIT_SCALE	(0x09C)
+#define SM501_DC_VIDEO_ALPHA_CHROMA_KEY	(0x0A0)
+#define SM501_DC_VIDEO_ALPHA_COLOR_LOOKUP	(0x0A4)
+
+#define SM501_DC_PANEL_HWC_BASE		(0x0F0)
+#define SM501_DC_PANEL_HWC_ADDR		(0x0F0)
+#define SM501_DC_PANEL_HWC_LOC		(0x0F4)
+#define SM501_DC_PANEL_HWC_COLOR_1_2	(0x0F8)
+#define SM501_DC_PANEL_HWC_COLOR_3	(0x0FC)
+
+#define SM501_HWC_EN			(1<<31)
+
+#define SM501_OFF_HWC_ADDR		(0x00)
+#define SM501_OFF_HWC_LOC		(0x04)
+#define SM501_OFF_HWC_COLOR_1_2		(0x08)
+#define SM501_OFF_HWC_COLOR_3		(0x0C)
+
+#define SM501_DC_ALPHA_CONTROL		(0x100)
+#define SM501_DC_ALPHA_FB_ADDR		(0x104)
+#define SM501_DC_ALPHA_FB_OFFSET	(0x108)
+#define SM501_DC_ALPHA_TL_LOC		(0x10C)
+#define SM501_DC_ALPHA_BR_LOC		(0x110)
+#define SM501_DC_ALPHA_CHROMA_KEY	(0x114)
+#define SM501_DC_ALPHA_COLOR_LOOKUP	(0x118)
+
+#define SM501_DC_CRT_CONTROL		(0x200)
+
+#define SM501_DC_CRT_CONTROL_TVP	(1<<15)
+#define SM501_DC_CRT_CONTROL_CP		(1<<14)
+#define SM501_DC_CRT_CONTROL_VSP	(1<<13)
+#define SM501_DC_CRT_CONTROL_HSP	(1<<12)
+#define SM501_DC_CRT_CONTROL_VS		(1<<11)
+#define SM501_DC_CRT_CONTROL_BLANK	(1<<10)
+#define SM501_DC_CRT_CONTROL_SEL	(1<<9)
+#define SM501_DC_CRT_CONTROL_TE		(1<<8)
+#define SM501_DC_CRT_CONTROL_PIXEL_MASK (0xF << 4)
+#define SM501_DC_CRT_CONTROL_GAMMA	(1<<3)
+#define SM501_DC_CRT_CONTROL_ENABLE	(1<<2)
+
+#define SM501_DC_CRT_CONTROL_8BPP	(0<<0)
+#define SM501_DC_CRT_CONTROL_16BPP	(1<<0)
+#define SM501_DC_CRT_CONTROL_32BPP	(2<<0)
+
+#define SM501_DC_CRT_FB_ADDR		(0x204)
+#define SM501_DC_CRT_FB_OFFSET		(0x208)
+#define SM501_DC_CRT_H_TOT		(0x20C)
+#define SM501_DC_CRT_H_SYNC		(0x210)
+#define SM501_DC_CRT_V_TOT		(0x214)
+#define SM501_DC_CRT_V_SYNC		(0x218)
+#define SM501_DC_CRT_SIGNATURE_ANALYZER	(0x21C)
+#define SM501_DC_CRT_CUR_LINE		(0x220)
+#define SM501_DC_CRT_MONITOR_DETECT	(0x224)
+
+#define SM501_DC_CRT_HWC_BASE		(0x230)
+#define SM501_DC_CRT_HWC_ADDR		(0x230)
+#define SM501_DC_CRT_HWC_LOC		(0x234)
+#define SM501_DC_CRT_HWC_COLOR_1_2	(0x238)
+#define SM501_DC_CRT_HWC_COLOR_3	(0x23C)
+
+#define SM501_DC_PANEL_PALETTE		(0x400)
+
+#define SM501_DC_VIDEO_PALETTE		(0x800)
+
+#define SM501_DC_CRT_PALETTE		(0xC00)
+
+/* Zoom Video port base */
+#define SM501_ZVPORT			(0x090000)
+
+/* AC97/I2S base */
+#define SM501_AC97			(0x0A0000)
+
+/* 8051 micro controller base */
+#define SM501_UCONTROLLER		(0x0B0000)
+
+/* 8051 micro controller SRAM base */
+#define SM501_UCONTROLLER_SRAM		(0x0C0000)
+
+/* DMA base */
+#define SM501_DMA			(0x0D0000)
+
+/* 2d engine base */
+#define SM501_2D_ENGINE			(0x100000)
+#define SM501_2D_SOURCE			(0x00)
+#define SM501_2D_DESTINATION		(0x04)
+#define SM501_2D_DIMENSION		(0x08)
+#define SM501_2D_CONTROL		(0x0C)
+#define SM501_2D_PITCH			(0x10)
+#define SM501_2D_FOREGROUND		(0x14)
+#define SM501_2D_BACKGROUND		(0x18)
+#define SM501_2D_STRETCH		(0x1C)
+#define SM501_2D_COLOR_COMPARE		(0x20)
+#define SM501_2D_COLOR_COMPARE_MASK 	(0x24)
+#define SM501_2D_MASK			(0x28)
+#define SM501_2D_CLIP_TL		(0x2C)
+#define SM501_2D_CLIP_BR		(0x30)
+#define SM501_2D_MONO_PATTERN_LOW	(0x34)
+#define SM501_2D_MONO_PATTERN_HIGH	(0x38)
+#define SM501_2D_WINDOW_WIDTH		(0x3C)
+#define SM501_2D_SOURCE_BASE		(0x40)
+#define SM501_2D_DESTINATION_BASE	(0x44)
+#define SM501_2D_ALPHA			(0x48)
+#define SM501_2D_WRAP			(0x4C)
+#define SM501_2D_STATUS			(0x50)
+
+#define SM501_CSC_Y_SOURCE_BASE		(0xC8)
+#define SM501_CSC_CONSTANTS		(0xCC)
+#define SM501_CSC_Y_SOURCE_X		(0xD0)
+#define SM501_CSC_Y_SOURCE_Y		(0xD4)
+#define SM501_CSC_U_SOURCE_BASE		(0xD8)
+#define SM501_CSC_V_SOURCE_BASE		(0xDC)
+#define SM501_CSC_SOURCE_DIMENSION	(0xE0)
+#define SM501_CSC_SOURCE_PITCH		(0xE4)
+#define SM501_CSC_DESTINATION		(0xE8)
+#define SM501_CSC_DESTINATION_DIMENSION	(0xEC)
+#define SM501_CSC_DESTINATION_PITCH	(0xF0)
+#define SM501_CSC_SCALE_FACTOR		(0xF4)
+#define SM501_CSC_DESTINATION_BASE	(0xF8)
+#define SM501_CSC_CONTROL		(0xFC)
+
+/* 2d engine data port base */
+#define SM501_2D_ENGINE_DATA		(0x110000)
diff --git a/include/linux/sm501.h b/include/linux/sm501.h
new file mode 100644
index 00000000..02fde50a
--- /dev/null
+++ b/include/linux/sm501.h
@@ -0,0 +1,182 @@
+/* include/linux/sm501.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+extern int sm501_unit_power(struct device *dev,
+			    unsigned int unit, unsigned int to);
+
+extern unsigned long sm501_set_clock(struct device *dev,
+				     int clksrc, unsigned long freq);
+
+extern unsigned long sm501_find_clock(struct device *dev,
+				      int clksrc, unsigned long req_freq);
+
+/* sm501_misc_control
+ *
+ * Modify the SM501's MISC_CONTROL register
+*/
+
+extern int sm501_misc_control(struct device *dev,
+			      unsigned long set, unsigned long clear);
+
+/* sm501_modify_reg
+ *
+ * Modify a register in the SM501 which may be shared with other
+ * drivers.
+*/
+
+extern unsigned long sm501_modify_reg(struct device *dev,
+				      unsigned long reg,
+				      unsigned long set,
+				      unsigned long clear);
+
+
+/* Platform data definitions */
+
+#define SM501FB_FLAG_USE_INIT_MODE	(1<<0)
+#define SM501FB_FLAG_DISABLE_AT_EXIT	(1<<1)
+#define SM501FB_FLAG_USE_HWCURSOR	(1<<2)
+#define SM501FB_FLAG_USE_HWACCEL	(1<<3)
+#define SM501FB_FLAG_PANEL_NO_FPEN	(1<<4)
+#define SM501FB_FLAG_PANEL_NO_VBIASEN	(1<<5)
+#define SM501FB_FLAG_PANEL_INV_FPEN	(1<<6)
+#define SM501FB_FLAG_PANEL_INV_VBIASEN	(1<<7)
+
+struct sm501_platdata_fbsub {
+	struct fb_videomode	*def_mode;
+	unsigned int		 def_bpp;
+	unsigned long		 max_mem;
+	unsigned int		 flags;
+};
+
+enum sm501_fb_routing {
+	SM501_FB_OWN		= 0,	/* CRT=>CRT, Panel=>Panel */
+	SM501_FB_CRT_PANEL	= 1,	/* Panel=>CRT, Panel=>Panel */
+};
+
+/* sm501_platdata_fb flag field bit definitions */
+
+#define SM501_FBPD_SWAP_FB_ENDIAN	(1<<0)	/* need to endian swap */
+
+/* sm501_platdata_fb
+ *
+ * configuration data for the framebuffer driver
+*/
+
+struct sm501_platdata_fb {
+	enum sm501_fb_routing		 fb_route;
+	unsigned int			 flags;
+	struct sm501_platdata_fbsub	*fb_crt;
+	struct sm501_platdata_fbsub	*fb_pnl;
+};
+
+/* gpio i2c
+ *
+ * Note, we have to pass in the bus number, as the number used will be
+ * passed to the i2c-gpio driver's platform_device.id, subsequently used
+ * to register the i2c bus.
+*/
+
+struct sm501_platdata_gpio_i2c {
+	unsigned int		bus_num;
+	unsigned int		pin_sda;
+	unsigned int		pin_scl;
+	int			udelay;
+	int			timeout;
+};
+
+/* sm501_initdata
+ *
+ * use for initialising values that may not have been setup
+ * before the driver is loaded.
+*/
+
+struct sm501_reg_init {
+	unsigned long		set;
+	unsigned long		mask;
+};
+
+#define SM501_USE_USB_HOST	(1<<0)
+#define SM501_USE_USB_SLAVE	(1<<1)
+#define SM501_USE_SSP0		(1<<2)
+#define SM501_USE_SSP1		(1<<3)
+#define SM501_USE_UART0		(1<<4)
+#define SM501_USE_UART1		(1<<5)
+#define SM501_USE_FBACCEL	(1<<6)
+#define SM501_USE_AC97		(1<<7)
+#define SM501_USE_I2S		(1<<8)
+#define SM501_USE_GPIO		(1<<9)
+
+#define SM501_USE_ALL		(0xffffffff)
+
+struct sm501_initdata {
+	struct sm501_reg_init	gpio_low;
+	struct sm501_reg_init	gpio_high;
+	struct sm501_reg_init	misc_timing;
+	struct sm501_reg_init	misc_control;
+
+	unsigned long		devices;
+	unsigned long		mclk;		/* non-zero to modify */
+	unsigned long		m1xclk;		/* non-zero to modify */
+};
+
+/* sm501_init_gpio
+ *
+ * default gpio settings
+*/
+
+struct sm501_init_gpio {
+	struct sm501_reg_init	gpio_data_low;
+	struct sm501_reg_init	gpio_data_high;
+	struct sm501_reg_init	gpio_ddr_low;
+	struct sm501_reg_init	gpio_ddr_high;
+};
+
+#define SM501_FLAG_SUSPEND_OFF		(1<<4)
+
+/* sm501_platdata
+ *
+ * This is passed with the platform device to allow the board
+ * to control the behaviour of the SM501 driver(s) which attach
+ * to the device.
+ *
+*/
+
+struct sm501_platdata {
+	struct sm501_initdata		*init;
+	struct sm501_init_gpio		*init_gpiop;
+	struct sm501_platdata_fb	*fb;
+
+	int				 flags;
+	int				 gpio_base;
+
+	int	(*get_power)(struct device *dev);
+	int	(*set_power)(struct device *dev, unsigned int on);
+
+	struct sm501_platdata_gpio_i2c	*gpio_i2c;
+	unsigned int			 gpio_i2c_nr;
+};
+
+#if defined(CONFIG_PPC32)
+#define smc501_readl(addr)		ioread32be((addr))
+#define smc501_writel(val, addr)	iowrite32be((val), (addr))
+#else
+#define smc501_readl(addr)		readl(addr)
+#define smc501_writel(val, addr)	writel(val, addr)
+#endif
diff --git a/include/linux/smc911x.h b/include/linux/smc911x.h
new file mode 100644
index 00000000..521f3714
--- /dev/null
+++ b/include/linux/smc911x.h
@@ -0,0 +1,13 @@
+#ifndef __SMC911X_H__
+#define __SMC911X_H__
+
+#define SMC911X_USE_16BIT (1 << 0)
+#define SMC911X_USE_32BIT (1 << 1)
+
+struct smc911x_platdata {
+	unsigned long flags;
+	unsigned long irq_flags; /* IRQF_... */
+	int irq_polarity;
+};
+
+#endif /* __SMC911X_H__ */
diff --git a/include/linux/smc91x.h b/include/linux/smc91x.h
new file mode 100644
index 00000000..76199b75
--- /dev/null
+++ b/include/linux/smc91x.h
@@ -0,0 +1,34 @@
+#ifndef __SMC91X_H__
+#define __SMC91X_H__
+
+#define SMC91X_USE_8BIT (1 << 0)
+#define SMC91X_USE_16BIT (1 << 1)
+#define SMC91X_USE_32BIT (1 << 2)
+
+#define SMC91X_NOWAIT		(1 << 3)
+
+/* two bits for IO_SHIFT, let's hope later designs will keep this sane */
+#define SMC91X_IO_SHIFT_0	(0 << 4)
+#define SMC91X_IO_SHIFT_1	(1 << 4)
+#define SMC91X_IO_SHIFT_2	(2 << 4)
+#define SMC91X_IO_SHIFT_3	(3 << 4)
+#define SMC91X_IO_SHIFT(x)	(((x) >> 4) & 0x3)
+
+#define SMC91X_USE_DMA		(1 << 6)
+
+#define RPC_LED_100_10	(0x00)	/* LED = 100Mbps OR's with 10Mbps link detect */
+#define RPC_LED_RES	(0x01)	/* LED = Reserved */
+#define RPC_LED_10	(0x02)	/* LED = 10Mbps link detect */
+#define RPC_LED_FD	(0x03)	/* LED = Full Duplex Mode */
+#define RPC_LED_TX_RX	(0x04)	/* LED = TX or RX packet occurred */
+#define RPC_LED_100	(0x05)	/* LED = 100Mbps link detect */
+#define RPC_LED_TX	(0x06)	/* LED = TX packet occurred */
+#define RPC_LED_RX	(0x07)	/* LED = RX packet occurred */
+
+struct smc91x_platdata {
+	unsigned long flags;
+	unsigned char leda;
+	unsigned char ledb;
+};
+
+#endif /* __SMC91X_H__ */
diff --git a/include/linux/smp.h b/include/linux/smp.h
new file mode 100644
index 00000000..10530d92
--- /dev/null
+++ b/include/linux/smp.h
@@ -0,0 +1,230 @@
+#ifndef __LINUX_SMP_H
+#define __LINUX_SMP_H
+
+/*
+ *	Generic SMP support
+ *		Alan Cox. <alan@redhat.com>
+ */
+
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/cpumask.h>
+#include <linux/init.h>
+
+extern void cpu_idle(void);
+
+typedef void (*smp_call_func_t)(void *info);
+struct call_single_data {
+	struct list_head list;
+	smp_call_func_t func;
+	void *info;
+	u16 flags;
+	u16 priv;
+};
+
+/* total number of cpus in this system (may exceed NR_CPUS) */
+extern unsigned int total_cpus;
+
+int smp_call_function_single(int cpuid, smp_call_func_t func, void *info,
+			     int wait);
+
+#ifdef CONFIG_SMP
+
+#include <linux/preempt.h>
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/thread_info.h>
+#include <asm/smp.h>
+
+/*
+ * main cross-CPU interfaces, handles INIT, TLB flush, STOP, etc.
+ * (defined in asm header):
+ */
+
+/*
+ * stops all CPUs but the current one:
+ */
+extern void smp_send_stop(void);
+
+/*
+ * sends a 'reschedule' event to another CPU:
+ */
+extern void smp_send_reschedule(int cpu);
+
+
+/*
+ * Prepare machine for booting other CPUs.
+ */
+extern void smp_prepare_cpus(unsigned int max_cpus);
+
+/*
+ * Bring a CPU up
+ */
+extern int __cpu_up(unsigned int cpunum);
+
+/*
+ * Final polishing of CPUs
+ */
+extern void smp_cpus_done(unsigned int max_cpus);
+
+/*
+ * Call a function on all other processors
+ */
+int smp_call_function(smp_call_func_t func, void *info, int wait);
+void smp_call_function_many(const struct cpumask *mask,
+			    smp_call_func_t func, void *info, bool wait);
+
+void __smp_call_function_single(int cpuid, struct call_single_data *data,
+				int wait);
+
+int smp_call_function_any(const struct cpumask *mask,
+			  smp_call_func_t func, void *info, int wait);
+
+/*
+ * Generic and arch helpers
+ */
+#ifdef CONFIG_USE_GENERIC_SMP_HELPERS
+void __init call_function_init(void);
+void generic_smp_call_function_single_interrupt(void);
+void generic_smp_call_function_interrupt(void);
+void ipi_call_lock(void);
+void ipi_call_unlock(void);
+void ipi_call_lock_irq(void);
+void ipi_call_unlock_irq(void);
+#else
+static inline void call_function_init(void) { }
+#endif
+
+/*
+ * Call a function on all processors
+ */
+int on_each_cpu(smp_call_func_t func, void *info, int wait);
+
+/*
+ * Call a function on processors specified by mask, which might include
+ * the local one.
+ */
+void on_each_cpu_mask(const struct cpumask *mask, smp_call_func_t func,
+		void *info, bool wait);
+
+/*
+ * Call a function on each processor for which the supplied function
+ * cond_func returns a positive value. This may include the local
+ * processor.
+ */
+void on_each_cpu_cond(bool (*cond_func)(int cpu, void *info),
+		smp_call_func_t func, void *info, bool wait,
+		gfp_t gfp_flags);
+
+/*
+ * Mark the boot cpu "online" so that it can call console drivers in
+ * printk() and can access its per-cpu storage.
+ */
+void smp_prepare_boot_cpu(void);
+
+extern unsigned int setup_max_cpus;
+extern void __init setup_nr_cpu_ids(void);
+extern void __init smp_init(void);
+
+#else /* !SMP */
+
+static inline void smp_send_stop(void) { }
+
+/*
+ *	These macros fold the SMP functionality into a single CPU system
+ */
+#define raw_smp_processor_id()			0
+static inline int up_smp_call_function(smp_call_func_t func, void *info)
+{
+	return 0;
+}
+#define smp_call_function(func, info, wait) \
+			(up_smp_call_function(func, info))
+#define on_each_cpu(func,info,wait)		\
+	({					\
+		local_irq_disable();		\
+		func(info);			\
+		local_irq_enable();		\
+		0;				\
+	})
+/*
+ * Note we still need to test the mask even for UP
+ * because we actually can get an empty mask from
+ * code that on SMP might call us without the local
+ * CPU in the mask.
+ */
+#define on_each_cpu_mask(mask, func, info, wait) \
+	do {						\
+		if (cpumask_test_cpu(0, (mask))) {	\
+			local_irq_disable();		\
+			(func)(info);			\
+			local_irq_enable();		\
+		}					\
+	} while (0)
+/*
+ * Preemption is disabled here to make sure the cond_func is called under the
+ * same condtions in UP and SMP.
+ */
+#define on_each_cpu_cond(cond_func, func, info, wait, gfp_flags)\
+	do {							\
+		void *__info = (info);				\
+		preempt_disable();				\
+		if ((cond_func)(0, __info)) {			\
+			local_irq_disable();			\
+			(func)(__info);				\
+			local_irq_enable();			\
+		}						\
+		preempt_enable();				\
+	} while (0)
+
+static inline void smp_send_reschedule(int cpu) { }
+#define num_booting_cpus()			1
+#define smp_prepare_boot_cpu()			do {} while (0)
+#define smp_call_function_many(mask, func, info, wait) \
+			(up_smp_call_function(func, info))
+static inline void call_function_init(void) { }
+
+static inline int
+smp_call_function_any(const struct cpumask *mask, smp_call_func_t func,
+		      void *info, int wait)
+{
+	return smp_call_function_single(0, func, info, wait);
+}
+
+#endif /* !SMP */
+
+/*
+ * smp_processor_id(): get the current CPU ID.
+ *
+ * if DEBUG_PREEMPT is enabled then we check whether it is
+ * used in a preemption-safe way. (smp_processor_id() is safe
+ * if it's used in a preemption-off critical section, or in
+ * a thread that is bound to the current CPU.)
+ *
+ * NOTE: raw_smp_processor_id() is for internal use only
+ * (smp_processor_id() is the preferred variant), but in rare
+ * instances it might also be used to turn off false positives
+ * (i.e. smp_processor_id() use that the debugging code reports but
+ * which use for some reason is legal). Don't use this to hack around
+ * the warning message, as your code might not work under PREEMPT.
+ */
+#ifdef CONFIG_DEBUG_PREEMPT
+  extern unsigned int debug_smp_processor_id(void);
+# define smp_processor_id() debug_smp_processor_id()
+#else
+# define smp_processor_id() raw_smp_processor_id()
+#endif
+
+#define get_cpu()		({ preempt_disable(); smp_processor_id(); })
+#define put_cpu()		preempt_enable()
+
+/*
+ * Callback to arch code if there's nosmp or maxcpus=0 on the
+ * boot command line:
+ */
+extern void arch_disable_smp_support(void);
+
+void smp_setup_processor_id(void);
+
+#endif /* __LINUX_SMP_H */
diff --git a/include/linux/smsc911x.h b/include/linux/smsc911x.h
new file mode 100644
index 00000000..4dde70e7
--- /dev/null
+++ b/include/linux/smsc911x.h
@@ -0,0 +1,62 @@
+/***************************************************************************
+ *
+ * Copyright (C) 2004-2008 SMSC
+ * Copyright (C) 2005-2008 ARM
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ ***************************************************************************/
+#ifndef __LINUX_SMSC911X_H__
+#define __LINUX_SMSC911X_H__
+
+#include <linux/phy.h>
+
+/* platform_device configuration data, should be assigned to
+ * the platform_device's dev.platform_data */
+struct smsc911x_platform_config {
+	unsigned int irq_polarity;
+	unsigned int irq_type;
+	unsigned int flags;
+	unsigned int shift;
+	phy_interface_t phy_interface;
+	unsigned char mac[6];
+};
+
+/* Constants for platform_device irq polarity configuration */
+#define SMSC911X_IRQ_POLARITY_ACTIVE_LOW	0
+#define SMSC911X_IRQ_POLARITY_ACTIVE_HIGH	1
+
+/* Constants for platform_device irq type configuration */
+#define SMSC911X_IRQ_TYPE_OPEN_DRAIN		0
+#define SMSC911X_IRQ_TYPE_PUSH_PULL		1
+
+/* Constants for flags */
+#define SMSC911X_USE_16BIT 			(BIT(0))
+#define SMSC911X_USE_32BIT 			(BIT(1))
+#define SMSC911X_FORCE_INTERNAL_PHY		(BIT(2))
+#define SMSC911X_FORCE_EXTERNAL_PHY 		(BIT(3))
+#define SMSC911X_SAVE_MAC_ADDRESS		(BIT(4))
+
+/*
+ * SMSC911X_SWAP_FIFO:
+ * Enables software byte swap for fifo data. Should only be used as a
+ * "last resort" in the case of big endian mode on boards with incorrectly
+ * routed data bus to older devices such as LAN9118. Newer devices such as
+ * LAN9221 can handle this in hardware, there are registers to control
+ * this swapping but the driver doesn't currently use them.
+ */
+#define SMSC911X_SWAP_FIFO			(BIT(5))
+
+#endif /* __LINUX_SMSC911X_H__ */
diff --git a/include/linux/smscphy.h b/include/linux/smscphy.h
new file mode 100644
index 00000000..ce718cbc
--- /dev/null
+++ b/include/linux/smscphy.h
@@ -0,0 +1,25 @@
+#ifndef __LINUX_SMSCPHY_H__
+#define __LINUX_SMSCPHY_H__
+
+#define MII_LAN83C185_ISF 29 /* Interrupt Source Flags */
+#define MII_LAN83C185_IM  30 /* Interrupt Mask */
+#define MII_LAN83C185_CTRL_STATUS 17 /* Mode/Status Register */
+
+#define MII_LAN83C185_ISF_INT1 (1<<1) /* Auto-Negotiation Page Received */
+#define MII_LAN83C185_ISF_INT2 (1<<2) /* Parallel Detection Fault */
+#define MII_LAN83C185_ISF_INT3 (1<<3) /* Auto-Negotiation LP Ack */
+#define MII_LAN83C185_ISF_INT4 (1<<4) /* Link Down */
+#define MII_LAN83C185_ISF_INT5 (1<<5) /* Remote Fault Detected */
+#define MII_LAN83C185_ISF_INT6 (1<<6) /* Auto-Negotiation complete */
+#define MII_LAN83C185_ISF_INT7 (1<<7) /* ENERGYON */
+
+#define MII_LAN83C185_ISF_INT_ALL (0x0e)
+
+#define MII_LAN83C185_ISF_INT_PHYLIB_EVENTS \
+	(MII_LAN83C185_ISF_INT6 | MII_LAN83C185_ISF_INT4 | \
+	 MII_LAN83C185_ISF_INT7)
+
+#define MII_LAN83C185_EDPWRDOWN (1 << 13) /* EDPWRDOWN */
+#define MII_LAN83C185_ENERGYON  (1 << 1)  /* ENERGYON */
+
+#endif /* __LINUX_SMSCPHY_H__ */
diff --git a/include/linux/snmp.h b/include/linux/snmp.h
new file mode 100644
index 00000000..2e68f5ba
--- /dev/null
+++ b/include/linux/snmp.h
@@ -0,0 +1,273 @@
+/*
+ * Definitions for MIBs
+ *
+ * Author: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
+ */
+
+#ifndef _LINUX_SNMP_H
+#define _LINUX_SNMP_H
+
+/* ipstats mib definitions */
+/*
+ * RFC 1213:  MIB-II
+ * RFC 2011 (updates 1213):  SNMPv2-MIB-IP
+ * RFC 2863:  Interfaces Group MIB
+ * RFC 2465:  IPv6 MIB: General Group
+ * draft-ietf-ipv6-rfc2011-update-10.txt: MIB for IP: IP Statistics Tables
+ */
+enum
+{
+	IPSTATS_MIB_NUM = 0,
+	IPSTATS_MIB_INPKTS,			/* InReceives */
+	IPSTATS_MIB_INHDRERRORS,		/* InHdrErrors */
+	IPSTATS_MIB_INTOOBIGERRORS,		/* InTooBigErrors */
+	IPSTATS_MIB_INNOROUTES,			/* InNoRoutes */
+	IPSTATS_MIB_INADDRERRORS,		/* InAddrErrors */
+	IPSTATS_MIB_INUNKNOWNPROTOS,		/* InUnknownProtos */
+	IPSTATS_MIB_INTRUNCATEDPKTS,		/* InTruncatedPkts */
+	IPSTATS_MIB_INDISCARDS,			/* InDiscards */
+	IPSTATS_MIB_INDELIVERS,			/* InDelivers */
+	IPSTATS_MIB_OUTFORWDATAGRAMS,		/* OutForwDatagrams */
+	IPSTATS_MIB_OUTPKTS,			/* OutRequests */
+	IPSTATS_MIB_OUTDISCARDS,		/* OutDiscards */
+	IPSTATS_MIB_OUTNOROUTES,		/* OutNoRoutes */
+	IPSTATS_MIB_REASMTIMEOUT,		/* ReasmTimeout */
+	IPSTATS_MIB_REASMREQDS,			/* ReasmReqds */
+	IPSTATS_MIB_REASMOKS,			/* ReasmOKs */
+	IPSTATS_MIB_REASMFAILS,			/* ReasmFails */
+	IPSTATS_MIB_FRAGOKS,			/* FragOKs */
+	IPSTATS_MIB_FRAGFAILS,			/* FragFails */
+	IPSTATS_MIB_FRAGCREATES,		/* FragCreates */
+	IPSTATS_MIB_INMCASTPKTS,		/* InMcastPkts */
+	IPSTATS_MIB_OUTMCASTPKTS,		/* OutMcastPkts */
+	IPSTATS_MIB_INBCASTPKTS,		/* InBcastPkts */
+	IPSTATS_MIB_OUTBCASTPKTS,		/* OutBcastPkts */
+	IPSTATS_MIB_INOCTETS,			/* InOctets */
+	IPSTATS_MIB_OUTOCTETS,			/* OutOctets */
+	IPSTATS_MIB_INMCASTOCTETS,		/* InMcastOctets */
+	IPSTATS_MIB_OUTMCASTOCTETS,		/* OutMcastOctets */
+	IPSTATS_MIB_INBCASTOCTETS,		/* InBcastOctets */
+	IPSTATS_MIB_OUTBCASTOCTETS,		/* OutBcastOctets */
+	__IPSTATS_MIB_MAX
+};
+
+/* icmp mib definitions */
+/*
+ * RFC 1213:  MIB-II ICMP Group
+ * RFC 2011 (updates 1213):  SNMPv2 MIB for IP: ICMP group
+ */
+enum
+{
+	ICMP_MIB_NUM = 0,
+	ICMP_MIB_INMSGS,			/* InMsgs */
+	ICMP_MIB_INERRORS,			/* InErrors */
+	ICMP_MIB_INDESTUNREACHS,		/* InDestUnreachs */
+	ICMP_MIB_INTIMEEXCDS,			/* InTimeExcds */
+	ICMP_MIB_INPARMPROBS,			/* InParmProbs */
+	ICMP_MIB_INSRCQUENCHS,			/* InSrcQuenchs */
+	ICMP_MIB_INREDIRECTS,			/* InRedirects */
+	ICMP_MIB_INECHOS,			/* InEchos */
+	ICMP_MIB_INECHOREPS,			/* InEchoReps */
+	ICMP_MIB_INTIMESTAMPS,			/* InTimestamps */
+	ICMP_MIB_INTIMESTAMPREPS,		/* InTimestampReps */
+	ICMP_MIB_INADDRMASKS,			/* InAddrMasks */
+	ICMP_MIB_INADDRMASKREPS,		/* InAddrMaskReps */
+	ICMP_MIB_OUTMSGS,			/* OutMsgs */
+	ICMP_MIB_OUTERRORS,			/* OutErrors */
+	ICMP_MIB_OUTDESTUNREACHS,		/* OutDestUnreachs */
+	ICMP_MIB_OUTTIMEEXCDS,			/* OutTimeExcds */
+	ICMP_MIB_OUTPARMPROBS,			/* OutParmProbs */
+	ICMP_MIB_OUTSRCQUENCHS,			/* OutSrcQuenchs */
+	ICMP_MIB_OUTREDIRECTS,			/* OutRedirects */
+	ICMP_MIB_OUTECHOS,			/* OutEchos */
+	ICMP_MIB_OUTECHOREPS,			/* OutEchoReps */
+	ICMP_MIB_OUTTIMESTAMPS,			/* OutTimestamps */
+	ICMP_MIB_OUTTIMESTAMPREPS,		/* OutTimestampReps */
+	ICMP_MIB_OUTADDRMASKS,			/* OutAddrMasks */
+	ICMP_MIB_OUTADDRMASKREPS,		/* OutAddrMaskReps */
+	__ICMP_MIB_MAX
+};
+
+#define __ICMPMSG_MIB_MAX 512	/* Out+In for all 8-bit ICMP types */
+
+/* icmp6 mib definitions */
+/*
+ * RFC 2466:  ICMPv6-MIB
+ */
+enum
+{
+	ICMP6_MIB_NUM = 0,
+	ICMP6_MIB_INMSGS,			/* InMsgs */
+	ICMP6_MIB_INERRORS,			/* InErrors */
+	ICMP6_MIB_OUTMSGS,			/* OutMsgs */
+	ICMP6_MIB_OUTERRORS,			/* OutErrors */
+	__ICMP6_MIB_MAX
+};
+
+#define __ICMP6MSG_MIB_MAX 512 /* Out+In for all 8-bit ICMPv6 types */
+
+/* tcp mib definitions */
+/*
+ * RFC 1213:  MIB-II TCP group
+ * RFC 2012 (updates 1213):  SNMPv2-MIB-TCP
+ */
+enum
+{
+	TCP_MIB_NUM = 0,
+	TCP_MIB_RTOALGORITHM,			/* RtoAlgorithm */
+	TCP_MIB_RTOMIN,				/* RtoMin */
+	TCP_MIB_RTOMAX,				/* RtoMax */
+	TCP_MIB_MAXCONN,			/* MaxConn */
+	TCP_MIB_ACTIVEOPENS,			/* ActiveOpens */
+	TCP_MIB_PASSIVEOPENS,			/* PassiveOpens */
+	TCP_MIB_ATTEMPTFAILS,			/* AttemptFails */
+	TCP_MIB_ESTABRESETS,			/* EstabResets */
+	TCP_MIB_CURRESTAB,			/* CurrEstab */
+	TCP_MIB_INSEGS,				/* InSegs */
+	TCP_MIB_OUTSEGS,			/* OutSegs */
+	TCP_MIB_RETRANSSEGS,			/* RetransSegs */
+	TCP_MIB_INERRS,				/* InErrs */
+	TCP_MIB_OUTRSTS,			/* OutRsts */
+	__TCP_MIB_MAX
+};
+
+/* udp mib definitions */
+/*
+ * RFC 1213:  MIB-II UDP group
+ * RFC 2013 (updates 1213):  SNMPv2-MIB-UDP
+ */
+enum
+{
+	UDP_MIB_NUM = 0,
+	UDP_MIB_INDATAGRAMS,			/* InDatagrams */
+	UDP_MIB_NOPORTS,			/* NoPorts */
+	UDP_MIB_INERRORS,			/* InErrors */
+	UDP_MIB_OUTDATAGRAMS,			/* OutDatagrams */
+	UDP_MIB_RCVBUFERRORS,			/* RcvbufErrors */
+	UDP_MIB_SNDBUFERRORS,			/* SndbufErrors */
+	__UDP_MIB_MAX
+};
+
+/* linux mib definitions */
+enum
+{
+	LINUX_MIB_NUM = 0,
+	LINUX_MIB_SYNCOOKIESSENT,		/* SyncookiesSent */
+	LINUX_MIB_SYNCOOKIESRECV,		/* SyncookiesRecv */
+	LINUX_MIB_SYNCOOKIESFAILED,		/* SyncookiesFailed */
+	LINUX_MIB_EMBRYONICRSTS,		/* EmbryonicRsts */
+	LINUX_MIB_PRUNECALLED,			/* PruneCalled */
+	LINUX_MIB_RCVPRUNED,			/* RcvPruned */
+	LINUX_MIB_OFOPRUNED,			/* OfoPruned */
+	LINUX_MIB_OUTOFWINDOWICMPS,		/* OutOfWindowIcmps */
+	LINUX_MIB_LOCKDROPPEDICMPS,		/* LockDroppedIcmps */
+	LINUX_MIB_ARPFILTER,			/* ArpFilter */
+	LINUX_MIB_TIMEWAITED,			/* TimeWaited */
+	LINUX_MIB_TIMEWAITRECYCLED,		/* TimeWaitRecycled */
+	LINUX_MIB_TIMEWAITKILLED,		/* TimeWaitKilled */
+	LINUX_MIB_PAWSPASSIVEREJECTED,		/* PAWSPassiveRejected */
+	LINUX_MIB_PAWSACTIVEREJECTED,		/* PAWSActiveRejected */
+	LINUX_MIB_PAWSESTABREJECTED,		/* PAWSEstabRejected */
+	LINUX_MIB_DELAYEDACKS,			/* DelayedACKs */
+	LINUX_MIB_DELAYEDACKLOCKED,		/* DelayedACKLocked */
+	LINUX_MIB_DELAYEDACKLOST,		/* DelayedACKLost */
+	LINUX_MIB_LISTENOVERFLOWS,		/* ListenOverflows */
+	LINUX_MIB_LISTENDROPS,			/* ListenDrops */
+	LINUX_MIB_TCPPREQUEUED,			/* TCPPrequeued */
+	LINUX_MIB_TCPDIRECTCOPYFROMBACKLOG,	/* TCPDirectCopyFromBacklog */
+	LINUX_MIB_TCPDIRECTCOPYFROMPREQUEUE,	/* TCPDirectCopyFromPrequeue */
+	LINUX_MIB_TCPPREQUEUEDROPPED,		/* TCPPrequeueDropped */
+	LINUX_MIB_TCPHPHITS,			/* TCPHPHits */
+	LINUX_MIB_TCPHPHITSTOUSER,		/* TCPHPHitsToUser */
+	LINUX_MIB_TCPPUREACKS,			/* TCPPureAcks */
+	LINUX_MIB_TCPHPACKS,			/* TCPHPAcks */
+	LINUX_MIB_TCPRENORECOVERY,		/* TCPRenoRecovery */
+	LINUX_MIB_TCPSACKRECOVERY,		/* TCPSackRecovery */
+	LINUX_MIB_TCPSACKRENEGING,		/* TCPSACKReneging */
+	LINUX_MIB_TCPFACKREORDER,		/* TCPFACKReorder */
+	LINUX_MIB_TCPSACKREORDER,		/* TCPSACKReorder */
+	LINUX_MIB_TCPRENOREORDER,		/* TCPRenoReorder */
+	LINUX_MIB_TCPTSREORDER,			/* TCPTSReorder */
+	LINUX_MIB_TCPFULLUNDO,			/* TCPFullUndo */
+	LINUX_MIB_TCPPARTIALUNDO,		/* TCPPartialUndo */
+	LINUX_MIB_TCPDSACKUNDO,			/* TCPDSACKUndo */
+	LINUX_MIB_TCPLOSSUNDO,			/* TCPLossUndo */
+	LINUX_MIB_TCPLOSTRETRANSMIT,		/* TCPLostRetransmit */
+	LINUX_MIB_TCPRENOFAILURES,		/* TCPRenoFailures */
+	LINUX_MIB_TCPSACKFAILURES,		/* TCPSackFailures */
+	LINUX_MIB_TCPLOSSFAILURES,		/* TCPLossFailures */
+	LINUX_MIB_TCPFASTRETRANS,		/* TCPFastRetrans */
+	LINUX_MIB_TCPFORWARDRETRANS,		/* TCPForwardRetrans */
+	LINUX_MIB_TCPSLOWSTARTRETRANS,		/* TCPSlowStartRetrans */
+	LINUX_MIB_TCPTIMEOUTS,			/* TCPTimeouts */
+	LINUX_MIB_TCPRENORECOVERYFAIL,		/* TCPRenoRecoveryFail */
+	LINUX_MIB_TCPSACKRECOVERYFAIL,		/* TCPSackRecoveryFail */
+	LINUX_MIB_TCPSCHEDULERFAILED,		/* TCPSchedulerFailed */
+	LINUX_MIB_TCPRCVCOLLAPSED,		/* TCPRcvCollapsed */
+	LINUX_MIB_TCPDSACKOLDSENT,		/* TCPDSACKOldSent */
+	LINUX_MIB_TCPDSACKOFOSENT,		/* TCPDSACKOfoSent */
+	LINUX_MIB_TCPDSACKRECV,			/* TCPDSACKRecv */
+	LINUX_MIB_TCPDSACKOFORECV,		/* TCPDSACKOfoRecv */
+	LINUX_MIB_TCPABORTONSYN,		/* TCPAbortOnSyn */
+	LINUX_MIB_TCPABORTONDATA,		/* TCPAbortOnData */
+	LINUX_MIB_TCPABORTONCLOSE,		/* TCPAbortOnClose */
+	LINUX_MIB_TCPABORTONMEMORY,		/* TCPAbortOnMemory */
+	LINUX_MIB_TCPABORTONTIMEOUT,		/* TCPAbortOnTimeout */
+	LINUX_MIB_TCPABORTONLINGER,		/* TCPAbortOnLinger */
+	LINUX_MIB_TCPABORTFAILED,		/* TCPAbortFailed */
+	LINUX_MIB_TCPMEMORYPRESSURES,		/* TCPMemoryPressures */
+	LINUX_MIB_TCPSACKDISCARD,		/* TCPSACKDiscard */
+	LINUX_MIB_TCPDSACKIGNOREDOLD,		/* TCPSACKIgnoredOld */
+	LINUX_MIB_TCPDSACKIGNOREDNOUNDO,	/* TCPSACKIgnoredNoUndo */
+	LINUX_MIB_TCPSPURIOUSRTOS,		/* TCPSpuriousRTOs */
+	LINUX_MIB_TCPMD5NOTFOUND,		/* TCPMD5NotFound */
+	LINUX_MIB_TCPMD5UNEXPECTED,		/* TCPMD5Unexpected */
+	LINUX_MIB_SACKSHIFTED,
+	LINUX_MIB_SACKMERGED,
+	LINUX_MIB_SACKSHIFTFALLBACK,
+	LINUX_MIB_TCPBACKLOGDROP,
+	LINUX_MIB_TCPMINTTLDROP, /* RFC 5082 */
+	LINUX_MIB_TCPDEFERACCEPTDROP,
+	LINUX_MIB_IPRPFILTER, /* IP Reverse Path Filter (rp_filter) */
+	LINUX_MIB_TCPTIMEWAITOVERFLOW,		/* TCPTimeWaitOverflow */
+	LINUX_MIB_TCPREQQFULLDOCOOKIES,		/* TCPReqQFullDoCookies */
+	LINUX_MIB_TCPREQQFULLDROP,		/* TCPReqQFullDrop */
+	LINUX_MIB_TCPRETRANSFAIL,		/* TCPRetransFail */
+	LINUX_MIB_TCPRCVCOALESCE,			/* TCPRcvCoalesce */
+	__LINUX_MIB_MAX
+};
+
+/* linux Xfrm mib definitions */
+enum
+{
+	LINUX_MIB_XFRMNUM = 0,
+	LINUX_MIB_XFRMINERROR,			/* XfrmInError */
+	LINUX_MIB_XFRMINBUFFERERROR,		/* XfrmInBufferError */
+	LINUX_MIB_XFRMINHDRERROR,		/* XfrmInHdrError */
+	LINUX_MIB_XFRMINNOSTATES,		/* XfrmInNoStates */
+	LINUX_MIB_XFRMINSTATEPROTOERROR,	/* XfrmInStateProtoError */
+	LINUX_MIB_XFRMINSTATEMODEERROR,		/* XfrmInStateModeError */
+	LINUX_MIB_XFRMINSTATESEQERROR,		/* XfrmInStateSeqError */
+	LINUX_MIB_XFRMINSTATEEXPIRED,		/* XfrmInStateExpired */
+	LINUX_MIB_XFRMINSTATEMISMATCH,		/* XfrmInStateMismatch */
+	LINUX_MIB_XFRMINSTATEINVALID,		/* XfrmInStateInvalid */
+	LINUX_MIB_XFRMINTMPLMISMATCH,		/* XfrmInTmplMismatch */
+	LINUX_MIB_XFRMINNOPOLS,			/* XfrmInNoPols */
+	LINUX_MIB_XFRMINPOLBLOCK,		/* XfrmInPolBlock */
+	LINUX_MIB_XFRMINPOLERROR,		/* XfrmInPolError */
+	LINUX_MIB_XFRMOUTERROR,			/* XfrmOutError */
+	LINUX_MIB_XFRMOUTBUNDLEGENERROR,	/* XfrmOutBundleGenError */
+	LINUX_MIB_XFRMOUTBUNDLECHECKERROR,	/* XfrmOutBundleCheckError */
+	LINUX_MIB_XFRMOUTNOSTATES,		/* XfrmOutNoStates */
+	LINUX_MIB_XFRMOUTSTATEPROTOERROR,	/* XfrmOutStateProtoError */
+	LINUX_MIB_XFRMOUTSTATEMODEERROR,	/* XfrmOutStateModeError */
+	LINUX_MIB_XFRMOUTSTATESEQERROR,		/* XfrmOutStateSeqError */
+	LINUX_MIB_XFRMOUTSTATEEXPIRED,		/* XfrmOutStateExpired */
+	LINUX_MIB_XFRMOUTPOLBLOCK,		/* XfrmOutPolBlock */
+	LINUX_MIB_XFRMOUTPOLDEAD,		/* XfrmOutPolDead */
+	LINUX_MIB_XFRMOUTPOLERROR,		/* XfrmOutPolError */
+	LINUX_MIB_XFRMFWDHDRERROR,		/* XfrmFwdHdrError*/
+	__LINUX_MIB_XFRMMAX
+};
+
+#endif	/* _LINUX_SNMP_H */
diff --git a/include/linux/sock_diag.h b/include/linux/sock_diag.h
new file mode 100644
index 00000000..251729a4
--- /dev/null
+++ b/include/linux/sock_diag.h
@@ -0,0 +1,48 @@
+#ifndef __SOCK_DIAG_H__
+#define __SOCK_DIAG_H__
+
+#include <linux/types.h>
+
+#define SOCK_DIAG_BY_FAMILY 20
+
+struct sock_diag_req {
+	__u8	sdiag_family;
+	__u8	sdiag_protocol;
+};
+
+enum {
+	SK_MEMINFO_RMEM_ALLOC,
+	SK_MEMINFO_RCVBUF,
+	SK_MEMINFO_WMEM_ALLOC,
+	SK_MEMINFO_SNDBUF,
+	SK_MEMINFO_FWD_ALLOC,
+	SK_MEMINFO_WMEM_QUEUED,
+	SK_MEMINFO_OPTMEM,
+
+	SK_MEMINFO_VARS,
+};
+
+#ifdef __KERNEL__
+struct sk_buff;
+struct nlmsghdr;
+struct sock;
+
+struct sock_diag_handler {
+	__u8 family;
+	int (*dump)(struct sk_buff *skb, struct nlmsghdr *nlh);
+};
+
+int sock_diag_register(struct sock_diag_handler *h);
+void sock_diag_unregister(struct sock_diag_handler *h);
+
+void sock_diag_register_inet_compat(int (*fn)(struct sk_buff *skb, struct nlmsghdr *nlh));
+void sock_diag_unregister_inet_compat(int (*fn)(struct sk_buff *skb, struct nlmsghdr *nlh));
+
+int sock_diag_check_cookie(void *sk, __u32 *cookie);
+void sock_diag_save_cookie(void *sk, __u32 *cookie);
+
+int sock_diag_put_meminfo(struct sock *sk, struct sk_buff *skb, int attr);
+
+extern struct sock *sock_diag_nlsk;
+#endif /* KERNEL */
+#endif
diff --git a/include/linux/socket.h b/include/linux/socket.h
new file mode 100644
index 00000000..b84bbd48
--- /dev/null
+++ b/include/linux/socket.h
@@ -0,0 +1,343 @@
+#ifndef _LINUX_SOCKET_H
+#define _LINUX_SOCKET_H
+
+/*
+ * Desired design of maximum size and alignment (see RFC2553)
+ */
+#define _K_SS_MAXSIZE	128	/* Implementation specific max size */
+#define _K_SS_ALIGNSIZE	(__alignof__ (struct sockaddr *))
+				/* Implementation specific desired alignment */
+
+typedef unsigned short __kernel_sa_family_t;
+
+struct __kernel_sockaddr_storage {
+	__kernel_sa_family_t	ss_family;		/* address family */
+	/* Following field(s) are implementation specific */
+	char		__data[_K_SS_MAXSIZE - sizeof(unsigned short)];
+				/* space to achieve desired size, */
+				/* _SS_MAXSIZE value minus size of ss_family */
+} __attribute__ ((aligned(_K_SS_ALIGNSIZE)));	/* force desired alignment */
+
+#ifdef __KERNEL__
+
+#include <asm/socket.h>			/* arch-dependent defines	*/
+#include <linux/sockios.h>		/* the SIOCxxx I/O controls	*/
+#include <linux/uio.h>			/* iovec support		*/
+#include <linux/types.h>		/* pid_t			*/
+#include <linux/compiler.h>		/* __user			*/
+
+struct pid;
+struct cred;
+
+#define __sockaddr_check_size(size)	\
+	BUILD_BUG_ON(((size) > sizeof(struct __kernel_sockaddr_storage)))
+
+#ifdef CONFIG_PROC_FS
+struct seq_file;
+extern void socket_seq_show(struct seq_file *seq);
+#endif
+
+typedef __kernel_sa_family_t	sa_family_t;
+
+/*
+ *	1003.1g requires sa_family_t and that sa_data is char.
+ */
+ 
+struct sockaddr {
+	sa_family_t	sa_family;	/* address family, AF_xxx	*/
+	char		sa_data[14];	/* 14 bytes of protocol address	*/
+};
+
+struct linger {
+	int		l_onoff;	/* Linger active		*/
+	int		l_linger;	/* How long to linger for	*/
+};
+
+#define sockaddr_storage __kernel_sockaddr_storage
+
+/*
+ *	As we do 4.4BSD message passing we use a 4.4BSD message passing
+ *	system, not 4.3. Thus msg_accrights(len) are now missing. They
+ *	belong in an obscure libc emulation or the bin.
+ */
+ 
+struct msghdr {
+	void	*	msg_name;	/* Socket name			*/
+	int		msg_namelen;	/* Length of name		*/
+	struct iovec *	msg_iov;	/* Data blocks			*/
+	__kernel_size_t	msg_iovlen;	/* Number of blocks		*/
+	void 	*	msg_control;	/* Per protocol magic (eg BSD file descriptor passing) */
+	__kernel_size_t	msg_controllen;	/* Length of cmsg list */
+	unsigned	msg_flags;
+};
+
+/* For recvmmsg/sendmmsg */
+struct mmsghdr {
+	struct msghdr   msg_hdr;
+	unsigned        msg_len;
+};
+
+/*
+ *	POSIX 1003.1g - ancillary data object information
+ *	Ancillary data consits of a sequence of pairs of
+ *	(cmsghdr, cmsg_data[])
+ */
+
+struct cmsghdr {
+	__kernel_size_t	cmsg_len;	/* data byte count, including hdr */
+        int		cmsg_level;	/* originating protocol */
+        int		cmsg_type;	/* protocol-specific type */
+};
+
+/*
+ *	Ancillary data object information MACROS
+ *	Table 5-14 of POSIX 1003.1g
+ */
+
+#define __CMSG_NXTHDR(ctl, len, cmsg) __cmsg_nxthdr((ctl),(len),(cmsg))
+#define CMSG_NXTHDR(mhdr, cmsg) cmsg_nxthdr((mhdr), (cmsg))
+
+#define CMSG_ALIGN(len) ( ((len)+sizeof(long)-1) & ~(sizeof(long)-1) )
+
+#define CMSG_DATA(cmsg)	((void *)((char *)(cmsg) + CMSG_ALIGN(sizeof(struct cmsghdr))))
+#define CMSG_SPACE(len) (CMSG_ALIGN(sizeof(struct cmsghdr)) + CMSG_ALIGN(len))
+#define CMSG_LEN(len) (CMSG_ALIGN(sizeof(struct cmsghdr)) + (len))
+
+#define __CMSG_FIRSTHDR(ctl,len) ((len) >= sizeof(struct cmsghdr) ? \
+				  (struct cmsghdr *)(ctl) : \
+				  (struct cmsghdr *)NULL)
+#define CMSG_FIRSTHDR(msg)	__CMSG_FIRSTHDR((msg)->msg_control, (msg)->msg_controllen)
+#define CMSG_OK(mhdr, cmsg) ((cmsg)->cmsg_len >= sizeof(struct cmsghdr) && \
+			     (cmsg)->cmsg_len <= (unsigned long) \
+			     ((mhdr)->msg_controllen - \
+			      ((char *)(cmsg) - (char *)(mhdr)->msg_control)))
+
+/*
+ *	Get the next cmsg header
+ *
+ *	PLEASE, do not touch this function. If you think, that it is
+ *	incorrect, grep kernel sources and think about consequences
+ *	before trying to improve it.
+ *
+ *	Now it always returns valid, not truncated ancillary object
+ *	HEADER. But caller still MUST check, that cmsg->cmsg_len is
+ *	inside range, given by msg->msg_controllen before using
+ *	ancillary object DATA.				--ANK (980731)
+ */
+ 
+static inline struct cmsghdr * __cmsg_nxthdr(void *__ctl, __kernel_size_t __size,
+					       struct cmsghdr *__cmsg)
+{
+	struct cmsghdr * __ptr;
+
+	__ptr = (struct cmsghdr*)(((unsigned char *) __cmsg) +  CMSG_ALIGN(__cmsg->cmsg_len));
+	if ((unsigned long)((char*)(__ptr+1) - (char *) __ctl) > __size)
+		return (struct cmsghdr *)0;
+
+	return __ptr;
+}
+
+static inline struct cmsghdr * cmsg_nxthdr (struct msghdr *__msg, struct cmsghdr *__cmsg)
+{
+	return __cmsg_nxthdr(__msg->msg_control, __msg->msg_controllen, __cmsg);
+}
+
+/* "Socket"-level control message types: */
+
+#define	SCM_RIGHTS	0x01		/* rw: access rights (array of int) */
+#define SCM_CREDENTIALS 0x02		/* rw: struct ucred		*/
+#define SCM_SECURITY	0x03		/* rw: security label		*/
+
+struct ucred {
+	__u32	pid;
+	__u32	uid;
+	__u32	gid;
+};
+
+/* Supported address families. */
+#define AF_UNSPEC	0
+#define AF_UNIX		1	/* Unix domain sockets 		*/
+#define AF_LOCAL	1	/* POSIX name for AF_UNIX	*/
+#define AF_INET		2	/* Internet IP Protocol 	*/
+#define AF_AX25		3	/* Amateur Radio AX.25 		*/
+#define AF_IPX		4	/* Novell IPX 			*/
+#define AF_APPLETALK	5	/* AppleTalk DDP 		*/
+#define AF_NETROM	6	/* Amateur Radio NET/ROM 	*/
+#define AF_BRIDGE	7	/* Multiprotocol bridge 	*/
+#define AF_ATMPVC	8	/* ATM PVCs			*/
+#define AF_X25		9	/* Reserved for X.25 project 	*/
+#define AF_INET6	10	/* IP version 6			*/
+#define AF_ROSE		11	/* Amateur Radio X.25 PLP	*/
+#define AF_DECnet	12	/* Reserved for DECnet project	*/
+#define AF_NETBEUI	13	/* Reserved for 802.2LLC project*/
+#define AF_SECURITY	14	/* Security callback pseudo AF */
+#define AF_KEY		15      /* PF_KEY key management API */
+#define AF_NETLINK	16
+#define AF_ROUTE	AF_NETLINK /* Alias to emulate 4.4BSD */
+#define AF_PACKET	17	/* Packet family		*/
+#define AF_ASH		18	/* Ash				*/
+#define AF_ECONET	19	/* Acorn Econet			*/
+#define AF_ATMSVC	20	/* ATM SVCs			*/
+#define AF_RDS		21	/* RDS sockets 			*/
+#define AF_SNA		22	/* Linux SNA Project (nutters!) */
+#define AF_IRDA		23	/* IRDA sockets			*/
+#define AF_PPPOX	24	/* PPPoX sockets		*/
+#define AF_WANPIPE	25	/* Wanpipe API Sockets */
+#define AF_LLC		26	/* Linux LLC			*/
+#define AF_CAN		29	/* Controller Area Network      */
+#define AF_TIPC		30	/* TIPC sockets			*/
+#define AF_BLUETOOTH	31	/* Bluetooth sockets 		*/
+#define AF_IUCV		32	/* IUCV sockets			*/
+#define AF_RXRPC	33	/* RxRPC sockets 		*/
+#define AF_ISDN		34	/* mISDN sockets 		*/
+#define AF_PHONET	35	/* Phonet sockets		*/
+#define AF_IEEE802154	36	/* IEEE802154 sockets		*/
+#define AF_CAIF		37	/* CAIF sockets			*/
+#define AF_ALG		38	/* Algorithm sockets		*/
+#define AF_NFC		39	/* NFC sockets			*/
+#define AF_MAX		40	/* For now.. */
+
+/* Protocol families, same as address families. */
+#define PF_UNSPEC	AF_UNSPEC
+#define PF_UNIX		AF_UNIX
+#define PF_LOCAL	AF_LOCAL
+#define PF_INET		AF_INET
+#define PF_AX25		AF_AX25
+#define PF_IPX		AF_IPX
+#define PF_APPLETALK	AF_APPLETALK
+#define	PF_NETROM	AF_NETROM
+#define PF_BRIDGE	AF_BRIDGE
+#define PF_ATMPVC	AF_ATMPVC
+#define PF_X25		AF_X25
+#define PF_INET6	AF_INET6
+#define PF_ROSE		AF_ROSE
+#define PF_DECnet	AF_DECnet
+#define PF_NETBEUI	AF_NETBEUI
+#define PF_SECURITY	AF_SECURITY
+#define PF_KEY		AF_KEY
+#define PF_NETLINK	AF_NETLINK
+#define PF_ROUTE	AF_ROUTE
+#define PF_PACKET	AF_PACKET
+#define PF_ASH		AF_ASH
+#define PF_ECONET	AF_ECONET
+#define PF_ATMSVC	AF_ATMSVC
+#define PF_RDS		AF_RDS
+#define PF_SNA		AF_SNA
+#define PF_IRDA		AF_IRDA
+#define PF_PPPOX	AF_PPPOX
+#define PF_WANPIPE	AF_WANPIPE
+#define PF_LLC		AF_LLC
+#define PF_CAN		AF_CAN
+#define PF_TIPC		AF_TIPC
+#define PF_BLUETOOTH	AF_BLUETOOTH
+#define PF_IUCV		AF_IUCV
+#define PF_RXRPC	AF_RXRPC
+#define PF_ISDN		AF_ISDN
+#define PF_PHONET	AF_PHONET
+#define PF_IEEE802154	AF_IEEE802154
+#define PF_CAIF		AF_CAIF
+#define PF_ALG		AF_ALG
+#define PF_NFC		AF_NFC
+#define PF_MAX		AF_MAX
+
+/* Maximum queue length specifiable by listen.  */
+#define SOMAXCONN	128
+
+/* Flags we can use with send/ and recv. 
+   Added those for 1003.1g not all are supported yet
+ */
+ 
+#define MSG_OOB		1
+#define MSG_PEEK	2
+#define MSG_DONTROUTE	4
+#define MSG_TRYHARD     4       /* Synonym for MSG_DONTROUTE for DECnet */
+#define MSG_CTRUNC	8
+#define MSG_PROBE	0x10	/* Do not send. Only probe path f.e. for MTU */
+#define MSG_TRUNC	0x20
+#define MSG_DONTWAIT	0x40	/* Nonblocking io		 */
+#define MSG_EOR         0x80	/* End of record */
+#define MSG_WAITALL	0x100	/* Wait for a full request */
+#define MSG_FIN         0x200
+#define MSG_SYN		0x400
+#define MSG_CONFIRM	0x800	/* Confirm path validity */
+#define MSG_RST		0x1000
+#define MSG_ERRQUEUE	0x2000	/* Fetch message from error queue */
+#define MSG_NOSIGNAL	0x4000	/* Do not generate SIGPIPE */
+#define MSG_MORE	0x8000	/* Sender will send more */
+#define MSG_WAITFORONE	0x10000	/* recvmmsg(): block until 1+ packets avail */
+#define MSG_SENDPAGE_NOTLAST 0x20000 /* sendpage() internal : not the last page */
+#define MSG_EOF         MSG_FIN
+
+#define MSG_CMSG_CLOEXEC 0x40000000	/* Set close_on_exit for file
+					   descriptor received through
+					   SCM_RIGHTS */
+#if defined(CONFIG_COMPAT)
+#define MSG_CMSG_COMPAT	0x80000000	/* This message needs 32 bit fixups */
+#else
+#define MSG_CMSG_COMPAT	0		/* We never have 32 bit fixups */
+#endif
+
+
+/* Setsockoptions(2) level. Thanks to BSD these must match IPPROTO_xxx */
+#define SOL_IP		0
+/* #define SOL_ICMP	1	No-no-no! Due to Linux :-) we cannot use SOL_ICMP=1 */
+#define SOL_TCP		6
+#define SOL_UDP		17
+#define SOL_IPV6	41
+#define SOL_ICMPV6	58
+#define SOL_SCTP	132
+#define SOL_UDPLITE	136     /* UDP-Lite (RFC 3828) */
+#define SOL_RAW		255
+#define SOL_IPX		256
+#define SOL_AX25	257
+#define SOL_ATALK	258
+#define SOL_NETROM	259
+#define SOL_ROSE	260
+#define SOL_DECNET	261
+#define	SOL_X25		262
+#define SOL_PACKET	263
+#define SOL_ATM		264	/* ATM layer (cell level) */
+#define SOL_AAL		265	/* ATM Adaption Layer (packet level) */
+#define SOL_IRDA        266
+#define SOL_NETBEUI	267
+#define SOL_LLC		268
+#define SOL_DCCP	269
+#define SOL_NETLINK	270
+#define SOL_TIPC	271
+#define SOL_RXRPC	272
+#define SOL_PPPOL2TP	273
+#define SOL_BLUETOOTH	274
+#define SOL_PNPIPE	275
+#define SOL_RDS		276
+#define SOL_IUCV	277
+#define SOL_CAIF	278
+#define SOL_ALG		279
+
+/* IPX options */
+#define IPX_TYPE	1
+
+extern void cred_to_ucred(struct pid *pid, const struct cred *cred, struct ucred *ucred);
+
+extern int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len);
+extern int memcpy_fromiovecend(unsigned char *kdata, const struct iovec *iov,
+			       int offset, int len);
+extern int csum_partial_copy_fromiovecend(unsigned char *kdata, 
+					  struct iovec *iov, 
+					  int offset, 
+					  unsigned int len, __wsum *csump);
+
+extern int verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr_storage *address, int mode);
+extern int memcpy_toiovec(struct iovec *v, unsigned char *kdata, int len);
+extern int memcpy_toiovecend(const struct iovec *v, unsigned char *kdata,
+			     int offset, int len);
+extern int move_addr_to_kernel(void __user *uaddr, int ulen, struct sockaddr_storage *kaddr);
+extern int put_cmsg(struct msghdr*, int level, int type, int len, void *data);
+
+struct timespec;
+
+extern int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen,
+			  unsigned int flags, struct timespec *timeout);
+extern int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg,
+			  unsigned int vlen, unsigned int flags);
+#endif /* not kernel and not glibc */
+#endif /* _LINUX_SOCKET_H */
diff --git a/include/linux/sockios.h b/include/linux/sockios.h
new file mode 100644
index 00000000..f7ffe36d
--- /dev/null
+++ b/include/linux/sockios.h
@@ -0,0 +1,149 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions of the socket-level I/O control calls.
+ *
+ * Version:	@(#)sockios.h	1.0.2	03/09/93
+ *
+ * Authors:	Ross Biro
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_SOCKIOS_H
+#define _LINUX_SOCKIOS_H
+
+#include <asm/sockios.h>
+
+/* Linux-specific socket ioctls */
+#define SIOCINQ		FIONREAD
+#define SIOCOUTQ	TIOCOUTQ        /* output queue size (not sent + not acked) */
+
+/* Routing table calls. */
+#define SIOCADDRT	0x890B		/* add routing table entry	*/
+#define SIOCDELRT	0x890C		/* delete routing table entry	*/
+#define SIOCRTMSG	0x890D		/* call to routing system	*/
+
+/* Socket configuration controls. */
+#define SIOCGIFNAME	0x8910		/* get iface name		*/
+#define SIOCSIFLINK	0x8911		/* set iface channel		*/
+#define SIOCGIFCONF	0x8912		/* get iface list		*/
+#define SIOCGIFFLAGS	0x8913		/* get flags			*/
+#define SIOCSIFFLAGS	0x8914		/* set flags			*/
+#define SIOCGIFADDR	0x8915		/* get PA address		*/
+#define SIOCSIFADDR	0x8916		/* set PA address		*/
+#define SIOCGIFDSTADDR	0x8917		/* get remote PA address	*/
+#define SIOCSIFDSTADDR	0x8918		/* set remote PA address	*/
+#define SIOCGIFBRDADDR	0x8919		/* get broadcast PA address	*/
+#define SIOCSIFBRDADDR	0x891a		/* set broadcast PA address	*/
+#define SIOCGIFNETMASK	0x891b		/* get network PA mask		*/
+#define SIOCSIFNETMASK	0x891c		/* set network PA mask		*/
+#define SIOCGIFMETRIC	0x891d		/* get metric			*/
+#define SIOCSIFMETRIC	0x891e		/* set metric			*/
+#define SIOCGIFMEM	0x891f		/* get memory address (BSD)	*/
+#define SIOCSIFMEM	0x8920		/* set memory address (BSD)	*/
+#define SIOCGIFMTU	0x8921		/* get MTU size			*/
+#define SIOCSIFMTU	0x8922		/* set MTU size			*/
+#define SIOCSIFNAME	0x8923		/* set interface name */
+#define	SIOCSIFHWADDR	0x8924		/* set hardware address 	*/
+#define SIOCGIFENCAP	0x8925		/* get/set encapsulations       */
+#define SIOCSIFENCAP	0x8926		
+#define SIOCGIFHWADDR	0x8927		/* Get hardware address		*/
+#define SIOCGIFSLAVE	0x8929		/* Driver slaving support	*/
+#define SIOCSIFSLAVE	0x8930
+#define SIOCADDMULTI	0x8931		/* Multicast address lists	*/
+#define SIOCDELMULTI	0x8932
+#define SIOCGIFINDEX	0x8933		/* name -> if_index mapping	*/
+#define SIOGIFINDEX	SIOCGIFINDEX	/* misprint compatibility :-)	*/
+#define SIOCSIFPFLAGS	0x8934		/* set/get extended flags set	*/
+#define SIOCGIFPFLAGS	0x8935
+#define SIOCDIFADDR	0x8936		/* delete PA address		*/
+#define	SIOCSIFHWBROADCAST	0x8937	/* set hardware broadcast addr	*/
+#define SIOCGIFCOUNT	0x8938		/* get number of devices */
+#define SIOCKILLADDR	0x8939		/* kill sockets with this local addr */
+
+#define SIOCGIFBR	0x8940		/* Bridging support		*/
+#define SIOCSIFBR	0x8941		/* Set bridging options 	*/
+
+#define SIOCGIFTXQLEN	0x8942		/* Get the tx queue length	*/
+#define SIOCSIFTXQLEN	0x8943		/* Set the tx queue length 	*/
+
+/* SIOCGIFDIVERT was:	0x8944		Frame diversion support */
+/* SIOCSIFDIVERT was:	0x8945		Set frame diversion options */
+
+#define SIOCETHTOOL	0x8946		/* Ethtool interface		*/
+
+#define SIOCGMIIPHY	0x8947		/* Get address of MII PHY in use. */
+#define SIOCGMIIREG	0x8948		/* Read MII PHY register.	*/
+#define SIOCSMIIREG	0x8949		/* Write MII PHY register.	*/
+
+#define SIOCWANDEV	0x894A		/* get/set netdev parameters	*/
+
+#define SIOCOUTQNSD	0x894B		/* output queue size (not sent only) */
+
+/* ARP cache control calls. */
+		    /*  0x8950 - 0x8952  * obsolete calls, don't re-use */
+#define SIOCDARP	0x8953		/* delete ARP table entry	*/
+#define SIOCGARP	0x8954		/* get ARP table entry		*/
+#define SIOCSARP	0x8955		/* set ARP table entry		*/
+
+/* RARP cache control calls. */
+#define SIOCDRARP	0x8960		/* delete RARP table entry	*/
+#define SIOCGRARP	0x8961		/* get RARP table entry		*/
+#define SIOCSRARP	0x8962		/* set RARP table entry		*/
+
+/* Driver configuration calls */
+
+#define SIOCGIFMAP	0x8970		/* Get device parameters	*/
+#define SIOCSIFMAP	0x8971		/* Set device parameters	*/
+
+/* DLCI configuration calls */
+
+#define SIOCADDDLCI	0x8980		/* Create new DLCI device	*/
+#define SIOCDELDLCI	0x8981		/* Delete DLCI device		*/
+
+#define SIOCGIFVLAN	0x8982		/* 802.1Q VLAN support		*/
+#define SIOCSIFVLAN	0x8983		/* Set 802.1Q VLAN options 	*/
+
+/* bonding calls */
+
+#define SIOCBONDENSLAVE	0x8990		/* enslave a device to the bond */
+#define SIOCBONDRELEASE 0x8991		/* release a slave from the bond*/
+#define SIOCBONDSETHWADDR      0x8992	/* set the hw addr of the bond  */
+#define SIOCBONDSLAVEINFOQUERY 0x8993   /* rtn info about slave state   */
+#define SIOCBONDINFOQUERY      0x8994	/* rtn info about bond state    */
+#define SIOCBONDCHANGEACTIVE   0x8995   /* update to a new active slave */
+			
+/* bridge calls */
+#define SIOCBRADDBR     0x89a0		/* create new bridge device     */
+#define SIOCBRDELBR     0x89a1		/* remove bridge device         */
+#define SIOCBRADDIF	0x89a2		/* add interface to bridge      */
+#define SIOCBRDELIF	0x89a3		/* remove interface from bridge */
+
+/* hardware time stamping: parameters in linux/net_tstamp.h */
+#define SIOCSHWTSTAMP   0x89b0
+
+/* Device private ioctl calls */
+
+/*
+ *	These 16 ioctls are available to devices via the do_ioctl() device
+ *	vector. Each device should include this file and redefine these names
+ *	as their own. Because these are device dependent it is a good idea
+ *	_NOT_ to issue them to random objects and hope.
+ *
+ *	THESE IOCTLS ARE _DEPRECATED_ AND WILL DISAPPEAR IN 2.5.X -DaveM
+ */
+ 
+#define SIOCDEVPRIVATE	0x89F0	/* to 89FF */
+
+/*
+ *	These 16 ioctl calls are protocol private
+ */
+ 
+#define SIOCPROTOPRIVATE 0x89E0 /* to 89EF */
+#endif	/* _LINUX_SOCKIOS_H */
diff --git a/include/linux/som.h b/include/linux/som.h
new file mode 100644
index 00000000..166594e4
--- /dev/null
+++ b/include/linux/som.h
@@ -0,0 +1,154 @@
+#ifndef _LINUX_SOM_H
+#define _LINUX_SOM_H
+
+/* File format definition for SOM executables / shared libraries */
+
+/* we need struct timespec */
+#include <linux/time.h>
+
+#define SOM_PAGESIZE 4096
+
+/* this is the SOM header */
+struct som_hdr {
+	short		system_id;		/* magic number - system */
+	short		a_magic;		/* magic number - file type */
+	unsigned int	version_id;		/* versiod ID: YYMMDDHH */
+	struct timespec	file_time;		/* system clock */
+	unsigned int	entry_space;		/* space for entry point */
+	unsigned int	entry_subspace;		/* subspace for entry point */
+	unsigned int	entry_offset;		/* offset of entry point */
+	unsigned int	aux_header_location;	/* auxiliary header location */
+	unsigned int	aux_header_size;	/* auxiliary header size */
+	unsigned int	som_length;		/* length of entire SOM */
+	unsigned int	presumed_dp;		/* compiler's DP value */
+	unsigned int	space_location;		/* space dictionary location */
+	unsigned int	space_total;		/* number of space entries */
+	unsigned int	subspace_location;	/* subspace entries location */
+	unsigned int	subspace_total;		/* number of subspace entries */
+	unsigned int	loader_fixup_location;	/* MPE/iX loader fixup */
+	unsigned int	loader_fixup_total;	/* number of fixup records */
+	unsigned int	space_strings_location;	/* (sub)space names */
+	unsigned int	space_strings_size;	/* size of strings area */
+	unsigned int	init_array_location;	/* reserved */
+	unsigned int	init_array_total;	/* reserved */
+	unsigned int	compiler_location;	/* module dictionary */
+	unsigned int	compiler_total;		/* number of modules */
+	unsigned int	symbol_location;	/* symbol dictionary */
+	unsigned int	symbol_total;		/* number of symbols */
+	unsigned int	fixup_request_location;	/* fixup requests */
+	unsigned int	fixup_request_total;	/* number of fixup requests */
+	unsigned int	symbol_strings_location;/* module & symbol names area */
+	unsigned int	symbol_strings_size;	/* size of strings area */
+	unsigned int	unloadable_sp_location;	/* unloadable spaces location */
+	unsigned int	unloadable_sp_size;	/* size of data */
+	unsigned int	checksum;
+};
+
+/* values for system_id */
+
+#define SOM_SID_PARISC_1_0	0x020b
+#define SOM_SID_PARISC_1_1	0x0210
+#define SOM_SID_PARISC_2_0	0x0214
+
+/* values for a_magic */
+
+#define SOM_LIB_EXEC		0x0104
+#define SOM_RELOCATABLE		0x0106
+#define SOM_EXEC_NONSHARE	0x0107
+#define SOM_EXEC_SHARE		0x0108
+#define SOM_EXEC_DEMAND		0x010B
+#define SOM_LIB_DYN		0x010D
+#define SOM_LIB_SHARE		0x010E
+#define SOM_LIB_RELOC		0x0619
+
+/* values for version_id.  Decimal not hex, yes.  Grr. */
+
+#define SOM_ID_OLD		85082112
+#define SOM_ID_NEW		87102412
+
+struct aux_id {
+	unsigned int	mandatory :1;	/* the linker must understand this */
+	unsigned int	copy	  :1;	/* Must be copied by the linker */
+	unsigned int	append	  :1;	/* Must be merged by the linker */
+	unsigned int	ignore	  :1;	/* Discard section if unknown */
+	unsigned int	reserved  :12;
+	unsigned int	type	  :16;	/* Header type */
+	unsigned int	length;		/* length of _following_ data */
+};
+
+/* The Exec Auxiliary Header.  Called The HP-UX Header within HP apparently. */
+struct som_exec_auxhdr {
+	struct aux_id	som_auxhdr;
+	int		exec_tsize;	/* Text size in bytes */
+	int		exec_tmem;	/* Address to load text at */
+	int		exec_tfile;	/* Location of text in file */
+	int		exec_dsize;	/* Data size in bytes */
+	int		exec_dmem;	/* Address to load data at */
+	int		exec_dfile;	/* Location of data in file */
+	int		exec_bsize;	/* Uninitialised data (bss) */
+	int		exec_entry;	/* Address to start executing */
+	int		exec_flags;	/* loader flags */
+	int		exec_bfill;	/* initialisation value for bss */
+};
+
+/* Oh, the things people do to avoid casts.  Shame it'll break with gcc's
+ * new aliasing rules really.
+ */
+union name_pt {
+	char *		n_name;
+	unsigned int	n_strx;
+};
+
+/* The Space Dictionary */
+struct space_dictionary_record {
+	union name_pt	name;			/* index to subspace name */
+	unsigned int	is_loadable	:1;	/* loadable */
+	unsigned int	is_defined	:1;	/* defined within file */
+	unsigned int	is_private	:1;	/* not sharable */
+	unsigned int	has_intermediate_code :1; /* contains intermediate code */
+	unsigned int	is_tspecific	:1;	/* thread specific */
+	unsigned int	reserved	:11;	/* for future expansion */
+	unsigned int	sort_key	:8;	/* for linker */
+	unsigned int	reserved2	:8;	/* for future expansion */
+
+	int		space_number;		/* index */
+	int		subspace_index;		/* index into subspace dict */
+	unsigned int	subspace_quantity;	/* number of subspaces */
+	int		loader_fix_index;	/* for loader */
+	unsigned int	loader_fix_quantity;	/* for loader */
+	int		init_pointer_index;	/* data pointer array index */
+	unsigned int	init_pointer_quantity;	/* number of data pointers */
+};
+
+/* The Subspace Dictionary */
+struct subspace_dictionary_record {
+	int		space_index;
+	unsigned int	access_control_bits :7;
+	unsigned int	memory_resident	:1;
+	unsigned int	dup_common	:1;
+	unsigned int	is_common	:1;
+	unsigned int	quadrant	:2;
+	unsigned int	initially_frozen :1;
+	unsigned int	is_first	:1;
+	unsigned int	code_only	:1;
+	unsigned int	sort_key	:8;
+	unsigned int	replicate_init	:1;
+	unsigned int	continuation	:1;
+	unsigned int	is_tspecific	:1;
+	unsigned int	is_comdat	:1;
+	unsigned int	reserved	:4;
+
+	int		file_loc_init_value;
+	unsigned int	initialization_length;
+	unsigned int	subspace_start;
+	unsigned int	subspace_length;
+
+	unsigned int	reserved2	:5;
+	unsigned int	alignment	:27;
+
+	union name_pt	name;
+	int		fixup_request_index;
+	unsigned int	fixup_request_quantity;
+};
+
+#endif /* _LINUX_SOM_H */
diff --git a/include/linux/sonet.h b/include/linux/sonet.h
new file mode 100644
index 00000000..de8832dd
--- /dev/null
+++ b/include/linux/sonet.h
@@ -0,0 +1,75 @@
+/* sonet.h - SONET/SHD physical layer control */
+ 
+/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
+ 
+
+#ifndef LINUX_SONET_H
+#define LINUX_SONET_H
+
+#define __SONET_ITEMS \
+    __HANDLE_ITEM(section_bip); 	/* section parity errors (B1) */ \
+    __HANDLE_ITEM(line_bip);		/* line parity errors (B2) */ \
+    __HANDLE_ITEM(path_bip);		/* path parity errors (B3) */ \
+    __HANDLE_ITEM(line_febe);		/* line parity errors at remote */ \
+    __HANDLE_ITEM(path_febe);		/* path parity errors at remote */ \
+    __HANDLE_ITEM(corr_hcs);		/* correctable header errors */ \
+    __HANDLE_ITEM(uncorr_hcs);		/* uncorrectable header errors */ \
+    __HANDLE_ITEM(tx_cells);		/* cells sent */ \
+    __HANDLE_ITEM(rx_cells);		/* cells received */
+
+struct sonet_stats {
+#define __HANDLE_ITEM(i) int i
+	__SONET_ITEMS
+#undef __HANDLE_ITEM
+} __attribute__ ((packed));
+
+
+#define SONET_GETSTAT	_IOR('a',ATMIOC_PHYTYP,struct sonet_stats)
+					/* get statistics */
+#define SONET_GETSTATZ	_IOR('a',ATMIOC_PHYTYP+1,struct sonet_stats)
+					/* ... and zero counters */
+#define SONET_SETDIAG	_IOWR('a',ATMIOC_PHYTYP+2,int)
+					/* set error insertion */
+#define SONET_CLRDIAG	_IOWR('a',ATMIOC_PHYTYP+3,int)
+					/* clear error insertion */
+#define SONET_GETDIAG	_IOR('a',ATMIOC_PHYTYP+4,int)
+					/* query error insertion */
+#define SONET_SETFRAMING _IOW('a',ATMIOC_PHYTYP+5,int)
+					/* set framing mode (SONET/SDH) */
+#define SONET_GETFRAMING _IOR('a',ATMIOC_PHYTYP+6,int)
+					/* get framing mode */
+#define SONET_GETFRSENSE _IOR('a',ATMIOC_PHYTYP+7, \
+  unsigned char[SONET_FRSENSE_SIZE])	/* get framing sense information */
+
+#define SONET_INS_SBIP	  1		/* section BIP */
+#define SONET_INS_LBIP	  2		/* line BIP */
+#define SONET_INS_PBIP	  4		/* path BIP */
+#define SONET_INS_FRAME	  8		/* out of frame */
+#define SONET_INS_LOS	 16		/* set line to zero */
+#define SONET_INS_LAIS	 32		/* line alarm indication signal */
+#define SONET_INS_PAIS	 64		/* path alarm indication signal */
+#define SONET_INS_HCS	128		/* insert HCS error */
+
+#define SONET_FRAME_SONET 0		/* SONET STS-3 framing */
+#define SONET_FRAME_SDH   1		/* SDH STM-1 framing */
+
+#define SONET_FRSENSE_SIZE 6		/* C1[3],H1[3] (0xff for unknown) */
+
+
+#ifdef __KERNEL__
+
+#include <linux/atomic.h>
+
+struct k_sonet_stats {
+#define __HANDLE_ITEM(i) atomic_t i
+	__SONET_ITEMS
+#undef __HANDLE_ITEM
+};
+
+extern void sonet_copy_stats(struct k_sonet_stats *from,struct sonet_stats *to);
+extern void sonet_subtract_stats(struct k_sonet_stats *from,
+    struct sonet_stats *to);
+
+#endif
+
+#endif
diff --git a/include/linux/sony-laptop.h b/include/linux/sony-laptop.h
new file mode 100644
index 00000000..e2e036d9
--- /dev/null
+++ b/include/linux/sony-laptop.h
@@ -0,0 +1,34 @@
+#ifndef _SONYLAPTOP_H_
+#define _SONYLAPTOP_H_
+
+#include <linux/types.h>
+
+#ifdef __KERNEL__
+
+/* used only for communication between v4l and sony-laptop */
+
+#define SONY_PIC_COMMAND_GETCAMERA		 1	/* obsolete */
+#define SONY_PIC_COMMAND_SETCAMERA		 2
+#define SONY_PIC_COMMAND_GETCAMERABRIGHTNESS	 3	/* obsolete */
+#define SONY_PIC_COMMAND_SETCAMERABRIGHTNESS	 4
+#define SONY_PIC_COMMAND_GETCAMERACONTRAST	 5	/* obsolete */
+#define SONY_PIC_COMMAND_SETCAMERACONTRAST	 6
+#define SONY_PIC_COMMAND_GETCAMERAHUE		 7	/* obsolete */
+#define SONY_PIC_COMMAND_SETCAMERAHUE		 8
+#define SONY_PIC_COMMAND_GETCAMERACOLOR		 9	/* obsolete */
+#define SONY_PIC_COMMAND_SETCAMERACOLOR		10
+#define SONY_PIC_COMMAND_GETCAMERASHARPNESS	11	/* obsolete */
+#define SONY_PIC_COMMAND_SETCAMERASHARPNESS	12
+#define SONY_PIC_COMMAND_GETCAMERAPICTURE	13	/* obsolete */
+#define SONY_PIC_COMMAND_SETCAMERAPICTURE	14
+#define SONY_PIC_COMMAND_GETCAMERAAGC		15	/* obsolete */
+#define SONY_PIC_COMMAND_SETCAMERAAGC		16
+#define SONY_PIC_COMMAND_GETCAMERADIRECTION	17	/* obsolete */
+#define SONY_PIC_COMMAND_GETCAMERAROMVERSION	18	/* obsolete */
+#define SONY_PIC_COMMAND_GETCAMERAREVISION	19	/* obsolete */
+
+int sony_pic_camera_command(int command, u8 value);
+
+#endif	/* __KERNEL__ */
+
+#endif /* _SONYLAPTOP_H_ */
diff --git a/include/linux/sonypi.h b/include/linux/sonypi.h
new file mode 100644
index 00000000..c0f87da7
--- /dev/null
+++ b/include/linux/sonypi.h
@@ -0,0 +1,171 @@
+/*
+ * Sony Programmable I/O Control Device driver for VAIO
+ *
+ * Copyright (C) 2001-2005 Stelian Pop <stelian@popies.net>
+ *
+ * Copyright (C) 2005 Narayanan R S <nars@kadamba.org>
+
+ * Copyright (C) 2001-2002 Alcôve <www.alcove.com>
+ *
+ * Copyright (C) 2001 Michael Ashley <m.ashley@unsw.edu.au>
+ *
+ * Copyright (C) 2001 Junichi Morita <jun1m@mars.dti.ne.jp>
+ *
+ * Copyright (C) 2000 Takaya Kinjo <t-kinjo@tc4.so-net.ne.jp>
+ *
+ * Copyright (C) 2000 Andrew Tridgell <tridge@valinux.com>
+ *
+ * Earlier work by Werner Almesberger, Paul `Rusty' Russell and Paul Mackerras.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef _SONYPI_H_
+#define _SONYPI_H_
+
+#include <linux/types.h>
+
+/* events the user application reading /dev/sonypi can use */
+
+#define SONYPI_EVENT_IGNORE			 0
+#define SONYPI_EVENT_JOGDIAL_DOWN		 1
+#define SONYPI_EVENT_JOGDIAL_UP			 2
+#define SONYPI_EVENT_JOGDIAL_DOWN_PRESSED	 3
+#define SONYPI_EVENT_JOGDIAL_UP_PRESSED		 4
+#define SONYPI_EVENT_JOGDIAL_PRESSED		 5
+#define SONYPI_EVENT_JOGDIAL_RELEASED		 6	/* obsolete */
+#define SONYPI_EVENT_CAPTURE_PRESSED		 7
+#define SONYPI_EVENT_CAPTURE_RELEASED		 8	/* obsolete */
+#define SONYPI_EVENT_CAPTURE_PARTIALPRESSED	 9
+#define SONYPI_EVENT_CAPTURE_PARTIALRELEASED	10
+#define SONYPI_EVENT_FNKEY_ESC			11
+#define SONYPI_EVENT_FNKEY_F1			12
+#define SONYPI_EVENT_FNKEY_F2			13
+#define SONYPI_EVENT_FNKEY_F3			14
+#define SONYPI_EVENT_FNKEY_F4			15
+#define SONYPI_EVENT_FNKEY_F5			16
+#define SONYPI_EVENT_FNKEY_F6			17
+#define SONYPI_EVENT_FNKEY_F7			18
+#define SONYPI_EVENT_FNKEY_F8			19
+#define SONYPI_EVENT_FNKEY_F9			20
+#define SONYPI_EVENT_FNKEY_F10			21
+#define SONYPI_EVENT_FNKEY_F11			22
+#define SONYPI_EVENT_FNKEY_F12			23
+#define SONYPI_EVENT_FNKEY_1			24
+#define SONYPI_EVENT_FNKEY_2			25
+#define SONYPI_EVENT_FNKEY_D			26
+#define SONYPI_EVENT_FNKEY_E			27
+#define SONYPI_EVENT_FNKEY_F			28
+#define SONYPI_EVENT_FNKEY_S			29
+#define SONYPI_EVENT_FNKEY_B			30
+#define SONYPI_EVENT_BLUETOOTH_PRESSED		31
+#define SONYPI_EVENT_PKEY_P1			32
+#define SONYPI_EVENT_PKEY_P2			33
+#define SONYPI_EVENT_PKEY_P3			34
+#define SONYPI_EVENT_BACK_PRESSED		35
+#define SONYPI_EVENT_LID_CLOSED			36
+#define SONYPI_EVENT_LID_OPENED			37
+#define SONYPI_EVENT_BLUETOOTH_ON		38
+#define SONYPI_EVENT_BLUETOOTH_OFF		39
+#define SONYPI_EVENT_HELP_PRESSED		40
+#define SONYPI_EVENT_FNKEY_ONLY			41
+#define SONYPI_EVENT_JOGDIAL_FAST_DOWN		42
+#define SONYPI_EVENT_JOGDIAL_FAST_UP		43
+#define SONYPI_EVENT_JOGDIAL_FAST_DOWN_PRESSED	44
+#define SONYPI_EVENT_JOGDIAL_FAST_UP_PRESSED	45
+#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN		46
+#define SONYPI_EVENT_JOGDIAL_VFAST_UP		47
+#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN_PRESSED	48
+#define SONYPI_EVENT_JOGDIAL_VFAST_UP_PRESSED	49
+#define SONYPI_EVENT_ZOOM_PRESSED		50
+#define SONYPI_EVENT_THUMBPHRASE_PRESSED	51
+#define SONYPI_EVENT_MEYE_FACE			52
+#define SONYPI_EVENT_MEYE_OPPOSITE		53
+#define SONYPI_EVENT_MEMORYSTICK_INSERT		54
+#define SONYPI_EVENT_MEMORYSTICK_EJECT		55
+#define SONYPI_EVENT_ANYBUTTON_RELEASED		56
+#define SONYPI_EVENT_BATTERY_INSERT		57
+#define SONYPI_EVENT_BATTERY_REMOVE		58
+#define SONYPI_EVENT_FNKEY_RELEASED		59
+#define SONYPI_EVENT_WIRELESS_ON		60
+#define SONYPI_EVENT_WIRELESS_OFF		61
+#define SONYPI_EVENT_ZOOM_IN_PRESSED		62
+#define SONYPI_EVENT_ZOOM_OUT_PRESSED		63
+#define SONYPI_EVENT_CD_EJECT_PRESSED		64
+#define SONYPI_EVENT_MODEKEY_PRESSED		65
+#define SONYPI_EVENT_PKEY_P4			66
+#define SONYPI_EVENT_PKEY_P5			67
+#define SONYPI_EVENT_SETTINGKEY_PRESSED		68
+#define SONYPI_EVENT_VOLUME_INC_PRESSED		69
+#define SONYPI_EVENT_VOLUME_DEC_PRESSED		70
+#define SONYPI_EVENT_BRIGHTNESS_PRESSED		71
+#define SONYPI_EVENT_MEDIA_PRESSED		72
+#define SONYPI_EVENT_VENDOR_PRESSED		73
+
+/* get/set brightness */
+#define SONYPI_IOCGBRT		_IOR('v', 0, __u8)
+#define SONYPI_IOCSBRT		_IOW('v', 0, __u8)
+
+/* get battery full capacity/remaining capacity */
+#define SONYPI_IOCGBAT1CAP	_IOR('v', 2, __u16)
+#define SONYPI_IOCGBAT1REM	_IOR('v', 3, __u16)
+#define SONYPI_IOCGBAT2CAP	_IOR('v', 4, __u16)
+#define SONYPI_IOCGBAT2REM	_IOR('v', 5, __u16)
+
+/* get battery flags: battery1/battery2/ac adapter present */
+#define SONYPI_BFLAGS_B1	0x01
+#define SONYPI_BFLAGS_B2	0x02
+#define SONYPI_BFLAGS_AC	0x04
+#define SONYPI_IOCGBATFLAGS	_IOR('v', 7, __u8)
+
+/* get/set bluetooth subsystem state on/off */
+#define SONYPI_IOCGBLUE		_IOR('v', 8, __u8)
+#define SONYPI_IOCSBLUE		_IOW('v', 9, __u8)
+
+/* get/set fan state on/off */
+#define SONYPI_IOCGFAN		_IOR('v', 10, __u8)
+#define SONYPI_IOCSFAN		_IOW('v', 11, __u8)
+
+/* get temperature (C) */
+#define SONYPI_IOCGTEMP		_IOR('v', 12, __u8)
+
+#ifdef __KERNEL__
+
+/* used only for communication between v4l and sonypi */
+
+#define SONYPI_COMMAND_GETCAMERA		 1	/* obsolete */
+#define SONYPI_COMMAND_SETCAMERA		 2
+#define SONYPI_COMMAND_GETCAMERABRIGHTNESS	 3	/* obsolete */
+#define SONYPI_COMMAND_SETCAMERABRIGHTNESS	 4
+#define SONYPI_COMMAND_GETCAMERACONTRAST	 5	/* obsolete */
+#define SONYPI_COMMAND_SETCAMERACONTRAST	 6
+#define SONYPI_COMMAND_GETCAMERAHUE		 7	/* obsolete */
+#define SONYPI_COMMAND_SETCAMERAHUE		 8
+#define SONYPI_COMMAND_GETCAMERACOLOR		 9	/* obsolete */
+#define SONYPI_COMMAND_SETCAMERACOLOR		10
+#define SONYPI_COMMAND_GETCAMERASHARPNESS	11	/* obsolete */
+#define SONYPI_COMMAND_SETCAMERASHARPNESS	12
+#define SONYPI_COMMAND_GETCAMERAPICTURE		13	/* obsolete */
+#define SONYPI_COMMAND_SETCAMERAPICTURE		14
+#define SONYPI_COMMAND_GETCAMERAAGC		15	/* obsolete */
+#define SONYPI_COMMAND_SETCAMERAAGC		16
+#define SONYPI_COMMAND_GETCAMERADIRECTION	17	/* obsolete */
+#define SONYPI_COMMAND_GETCAMERAROMVERSION	18	/* obsolete */
+#define SONYPI_COMMAND_GETCAMERAREVISION	19	/* obsolete */
+
+#endif				/* __KERNEL__ */
+
+#endif				/* _SONYPI_H_ */
diff --git a/include/linux/sort.h b/include/linux/sort.h
new file mode 100644
index 00000000..d534da2b
--- /dev/null
+++ b/include/linux/sort.h
@@ -0,0 +1,10 @@
+#ifndef _LINUX_SORT_H
+#define _LINUX_SORT_H
+
+#include <linux/types.h>
+
+void sort(void *base, size_t num, size_t size,
+	  int (*cmp)(const void *, const void *),
+	  void (*swap)(void *, void *, int));
+
+#endif
diff --git a/include/linux/sound.h b/include/linux/sound.h
new file mode 100644
index 00000000..fae20ba0
--- /dev/null
+++ b/include/linux/sound.h
@@ -0,0 +1,48 @@
+#ifndef _LINUX_SOUND_H
+#define _LINUX_SOUND_H
+
+/*
+ * Minor numbers for the sound driver.
+ */
+
+#include <linux/fs.h>
+
+#define SND_DEV_CTL		0	/* Control port /dev/mixer */
+#define SND_DEV_SEQ		1	/* Sequencer output /dev/sequencer (FM
+						synthesizer and MIDI output) */
+#define SND_DEV_MIDIN		2	/* Raw midi access */
+#define SND_DEV_DSP		3	/* Digitized voice /dev/dsp */
+#define SND_DEV_AUDIO		4	/* Sparc compatible /dev/audio */
+#define SND_DEV_DSP16		5	/* Like /dev/dsp but 16 bits/sample */
+/* #define SND_DEV_STATUS	6 */	/* /dev/sndstat (obsolete) */
+#define SND_DEV_UNUSED		6
+#define SND_DEV_AWFM		7	/* Reserved */
+#define SND_DEV_SEQ2		8	/* /dev/sequencer, level 2 interface */
+/* #define SND_DEV_SNDPROC	9 */	/* /dev/sndproc for programmable devices (not used) */
+/* #define SND_DEV_DMMIDI	9 */
+#define SND_DEV_SYNTH		9	/* Raw synth access /dev/synth (same as /dev/dmfm) */
+#define SND_DEV_DMFM		10	/* Raw synth access /dev/dmfm */
+#define SND_DEV_UNKNOWN11	11
+#define SND_DEV_ADSP		12	/* Like /dev/dsp (obsolete) */
+#define SND_DEV_AMIDI		13	/* Like /dev/midi (obsolete) */
+#define SND_DEV_ADMMIDI		14	/* Like /dev/dmmidi (onsolete) */
+
+#ifdef __KERNEL__
+/*
+ *	Sound core interface functions
+ */
+ 
+struct device;
+extern int register_sound_special(const struct file_operations *fops, int unit);
+extern int register_sound_special_device(const struct file_operations *fops, int unit, struct device *dev);
+extern int register_sound_mixer(const struct file_operations *fops, int dev);
+extern int register_sound_midi(const struct file_operations *fops, int dev);
+extern int register_sound_dsp(const struct file_operations *fops, int dev);
+
+extern void unregister_sound_special(int unit);
+extern void unregister_sound_mixer(int unit);
+extern void unregister_sound_midi(int unit);
+extern void unregister_sound_dsp(int unit);
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_SOUND_H */
diff --git a/include/linux/soundcard.h b/include/linux/soundcard.h
new file mode 100644
index 00000000..dfcf86f0
--- /dev/null
+++ b/include/linux/soundcard.h
@@ -0,0 +1,1292 @@
+#ifndef SOUNDCARD_H
+#define SOUNDCARD_H
+/*
+ * Copyright by Hannu Savolainen 1993-1997
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met: 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer. 2.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+
+/*
+ * OSS interface version. With versions earlier than 3.6 this value is
+ * an integer with value less than 361. In versions 3.6 and later
+ * it's a six digit hexadecimal value. For example value
+ * of 0x030600 represents OSS version 3.6.0.
+ * Use ioctl(fd, OSS_GETVERSION, &int) to get the version number of
+ * the currently active driver.
+ */
+#define SOUND_VERSION	0x030802
+#define OPEN_SOUND_SYSTEM
+
+/* In Linux we need to be prepared for cross compiling */
+#include <linux/ioctl.h>
+
+/* Endian macros. */
+#ifdef __KERNEL__
+#  include <asm/byteorder.h>
+#else
+#  include <endian.h>
+#endif
+
+/*
+ *	Supported card ID numbers (Should be somewhere else?)
+ */
+
+#define SNDCARD_ADLIB		1
+#define SNDCARD_SB		2
+#define SNDCARD_PAS		3
+#define SNDCARD_GUS		4
+#define SNDCARD_MPU401		5
+#define SNDCARD_SB16		6
+#define SNDCARD_SB16MIDI	7
+#define SNDCARD_UART6850	8
+#define SNDCARD_GUS16		9
+#define SNDCARD_MSS		10
+#define SNDCARD_PSS     	11
+#define SNDCARD_SSCAPE		12
+#define SNDCARD_PSS_MPU     	13
+#define SNDCARD_PSS_MSS     	14
+#define SNDCARD_SSCAPE_MSS	15
+#define SNDCARD_TRXPRO		16
+#define SNDCARD_TRXPRO_SB	17
+#define SNDCARD_TRXPRO_MPU	18
+#define SNDCARD_MAD16		19
+#define SNDCARD_MAD16_MPU	20
+#define SNDCARD_CS4232		21
+#define SNDCARD_CS4232_MPU	22
+#define SNDCARD_MAUI		23
+#define SNDCARD_PSEUDO_MSS	24
+#define SNDCARD_GUSPNP		25
+#define SNDCARD_UART401		26
+/* Sound card numbers 27 to N are reserved. Don't add more numbers here. */
+
+/***********************************
+ * IOCTL Commands for /dev/sequencer
+ */
+
+#ifndef _SIOWR
+#if defined(_IOWR) && (defined(_AIX) || (!defined(sun) && !defined(sparc) && !defined(__sparc__) && !defined(__INCioctlh) && !defined(__Lynx__)))
+/* Use already defined ioctl defines if they exist (except with Sun or Sparc) */
+#define	SIOCPARM_MASK	IOCPARM_MASK
+#define	SIOC_VOID	IOC_VOID
+#define	SIOC_OUT	IOC_OUT
+#define	SIOC_IN		IOC_IN
+#define	SIOC_INOUT	IOC_INOUT
+#define _SIOC_SIZE	_IOC_SIZE
+#define _SIOC_DIR	_IOC_DIR
+#define _SIOC_NONE	_IOC_NONE
+#define _SIOC_READ	_IOC_READ
+#define _SIOC_WRITE	_IOC_WRITE
+#define	_SIO		_IO
+#define	_SIOR		_IOR
+#define	_SIOW		_IOW
+#define	_SIOWR		_IOWR
+#else
+
+/* Ioctl's have the command encoded in the lower word,
+ * and the size of any in or out parameters in the upper
+ * word.  The high 2 bits of the upper word are used
+ * to encode the in/out status of the parameter; for now
+ * we restrict parameters to at most 8191 bytes.
+ */
+/* #define	SIOCTYPE		(0xff<<8) */
+#define	SIOCPARM_MASK	0x1fff		/* parameters must be < 8192 bytes */
+#define	SIOC_VOID	0x00000000	/* no parameters */
+#define	SIOC_OUT	0x20000000	/* copy out parameters */
+#define	SIOC_IN		0x40000000	/* copy in parameters */
+#define	SIOC_INOUT	(SIOC_IN|SIOC_OUT)
+/* the 0x20000000 is so we can distinguish new ioctl's from old */
+#define	_SIO(x,y)	((int)(SIOC_VOID|(x<<8)|y))
+#define	_SIOR(x,y,t)	((int)(SIOC_OUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
+#define	_SIOW(x,y,t)	((int)(SIOC_IN|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
+/* this should be _SIORW, but stdio got there first */
+#define	_SIOWR(x,y,t)	((int)(SIOC_INOUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
+#define _SIOC_SIZE(x)	((x>>16)&SIOCPARM_MASK)	
+#define _SIOC_DIR(x)	(x & 0xf0000000)
+#define _SIOC_NONE	SIOC_VOID
+#define _SIOC_READ	SIOC_OUT
+#define _SIOC_WRITE	SIOC_IN
+#  endif /* _IOWR */
+#endif  /* !_SIOWR */
+
+#define SNDCTL_SEQ_RESET		_SIO  ('Q', 0)
+#define SNDCTL_SEQ_SYNC			_SIO  ('Q', 1)
+#define SNDCTL_SYNTH_INFO		_SIOWR('Q', 2, struct synth_info)
+#define SNDCTL_SEQ_CTRLRATE		_SIOWR('Q', 3, int)	/* Set/get timer resolution (HZ) */
+#define SNDCTL_SEQ_GETOUTCOUNT		_SIOR ('Q', 4, int)
+#define SNDCTL_SEQ_GETINCOUNT		_SIOR ('Q', 5, int)
+#define SNDCTL_SEQ_PERCMODE		_SIOW ('Q', 6, int)
+#define SNDCTL_FM_LOAD_INSTR		_SIOW ('Q', 7, struct sbi_instrument)	/* Obsolete. Don't use!!!!!! */
+#define SNDCTL_SEQ_TESTMIDI		_SIOW ('Q', 8, int)
+#define SNDCTL_SEQ_RESETSAMPLES		_SIOW ('Q', 9, int)
+#define SNDCTL_SEQ_NRSYNTHS		_SIOR ('Q',10, int)
+#define SNDCTL_SEQ_NRMIDIS		_SIOR ('Q',11, int)
+#define SNDCTL_MIDI_INFO		_SIOWR('Q',12, struct midi_info)
+#define SNDCTL_SEQ_THRESHOLD		_SIOW ('Q',13, int)
+#define SNDCTL_SYNTH_MEMAVL		_SIOWR('Q',14, int)	/* in=dev#, out=memsize */
+#define SNDCTL_FM_4OP_ENABLE		_SIOW ('Q',15, int)	/* in=dev# */
+#define SNDCTL_SEQ_PANIC		_SIO  ('Q',17)
+#define SNDCTL_SEQ_OUTOFBAND		_SIOW ('Q',18, struct seq_event_rec)
+#define SNDCTL_SEQ_GETTIME		_SIOR ('Q',19, int)
+#define SNDCTL_SYNTH_ID			_SIOWR('Q',20, struct synth_info)
+#define SNDCTL_SYNTH_CONTROL		_SIOWR('Q',21, struct synth_control)
+#define SNDCTL_SYNTH_REMOVESAMPLE	_SIOWR('Q',22, struct remove_sample)
+
+typedef struct synth_control
+{
+	int devno;	/* Synthesizer # */
+	char data[4000]; /* Device spesific command/data record */
+}synth_control;
+
+typedef struct remove_sample
+{
+	int devno;	/* Synthesizer # */
+	int bankno;	/* MIDI bank # (0=General MIDI) */
+	int instrno;	/* MIDI instrument number */
+} remove_sample;
+
+typedef struct seq_event_rec {
+		unsigned char arr[8];
+} seq_event_rec;
+
+#define SNDCTL_TMR_TIMEBASE		_SIOWR('T', 1, int)
+#define SNDCTL_TMR_START		_SIO  ('T', 2)
+#define SNDCTL_TMR_STOP			_SIO  ('T', 3)
+#define SNDCTL_TMR_CONTINUE		_SIO  ('T', 4)
+#define SNDCTL_TMR_TEMPO		_SIOWR('T', 5, int)
+#define SNDCTL_TMR_SOURCE		_SIOWR('T', 6, int)
+#	define TMR_INTERNAL		0x00000001
+#	define TMR_EXTERNAL		0x00000002
+#		define TMR_MODE_MIDI	0x00000010
+#		define TMR_MODE_FSK	0x00000020
+#		define TMR_MODE_CLS	0x00000040
+#		define TMR_MODE_SMPTE	0x00000080
+#define SNDCTL_TMR_METRONOME		_SIOW ('T', 7, int)
+#define SNDCTL_TMR_SELECT		_SIOW ('T', 8, int)
+
+/*
+ * Some big endian/little endian handling macros
+ */
+
+#define _LINUX_PATCHKEY_H_INDIRECT
+#include <linux/patchkey.h>
+#undef _LINUX_PATCHKEY_H_INDIRECT
+
+#if defined(__KERNEL__)
+#  if defined(__BIG_ENDIAN)
+#    define AFMT_S16_NE AFMT_S16_BE
+#  elif defined(__LITTLE_ENDIAN)
+#    define AFMT_S16_NE AFMT_S16_LE
+#  else
+#    error "could not determine byte order"
+#  endif
+#else
+# if defined(__BYTE_ORDER)
+#  if __BYTE_ORDER == __BIG_ENDIAN
+#    define AFMT_S16_NE AFMT_S16_BE
+#  elif __BYTE_ORDER == __LITTLE_ENDIAN
+#    define AFMT_S16_NE AFMT_S16_LE
+#  else
+#    error "could not determine byte order"
+#  endif
+# endif
+#endif
+
+/*
+ *	Sample loading mechanism for internal synthesizers (/dev/sequencer)
+ *	The following patch_info structure has been designed to support
+ *	Gravis UltraSound. It tries to be universal format for uploading
+ *	sample based patches but is probably too limited.
+ *
+ *      (PBD) As Hannu guessed, the GUS structure is too limited for 
+ *      the WaveFront, but this is the right place for a constant definition.
+ */
+
+struct patch_info {
+		unsigned short key;		/* Use WAVE_PATCH here */
+#define WAVE_PATCH	   _PATCHKEY(0x04)
+#define GUS_PATCH	   WAVE_PATCH
+#define WAVEFRONT_PATCH    _PATCHKEY(0x06)
+
+		short device_no;	/* Synthesizer number */
+		short instr_no;		/* Midi pgm# */
+
+		unsigned int mode;
+/*
+ * The least significant byte has the same format than the GUS .PAT
+ * files
+ */
+#define WAVE_16_BITS	0x01	/* bit 0 = 8 or 16 bit wave data. */
+#define WAVE_UNSIGNED	0x02	/* bit 1 = Signed - Unsigned data. */
+#define WAVE_LOOPING	0x04	/* bit 2 = looping enabled-1. */
+#define WAVE_BIDIR_LOOP	0x08	/* bit 3 = Set is bidirectional looping. */
+#define WAVE_LOOP_BACK	0x10	/* bit 4 = Set is looping backward. */
+#define WAVE_SUSTAIN_ON	0x20	/* bit 5 = Turn sustaining on. (Env. pts. 3)*/
+#define WAVE_ENVELOPES	0x40	/* bit 6 = Enable envelopes - 1 */
+#define WAVE_FAST_RELEASE 0x80	/* bit 7 = Shut off immediately after note off */
+				/* 	(use the env_rate/env_offs fields). */
+/* Linux specific bits */
+#define WAVE_VIBRATO	0x00010000	/* The vibrato info is valid */
+#define WAVE_TREMOLO	0x00020000	/* The tremolo info is valid */
+#define WAVE_SCALE	0x00040000	/* The scaling info is valid */
+#define WAVE_FRACTIONS	0x00080000	/* Fraction information is valid */
+/* Reserved bits */
+#define WAVE_ROM	0x40000000	/* For future use */
+#define WAVE_MULAW	0x20000000	/* For future use */
+/* Other bits must be zeroed */
+
+		int len;	/* Size of the wave data in bytes */
+		int loop_start, loop_end; /* Byte offsets from the beginning */
+
+/* 
+ * The base_freq and base_note fields are used when computing the
+ * playback speed for a note. The base_note defines the tone frequency
+ * which is heard if the sample is played using the base_freq as the
+ * playback speed.
+ *
+ * The low_note and high_note fields define the minimum and maximum note
+ * frequencies for which this sample is valid. It is possible to define
+ * more than one samples for an instrument number at the same time. The
+ * low_note and high_note fields are used to select the most suitable one.
+ *
+ * The fields base_note, high_note and low_note should contain
+ * the note frequency multiplied by 1000. For example value for the
+ * middle A is 440*1000.
+ */
+
+		unsigned int base_freq;
+		unsigned int base_note;
+		unsigned int high_note;
+		unsigned int low_note;
+		int panning;	/* -128=left, 127=right */
+		int detuning;
+
+/*	New fields introduced in version 1.99.5	*/
+
+       /* Envelope. Enabled by mode bit WAVE_ENVELOPES	*/
+		unsigned char	env_rate[ 6 ];	 /* GUS HW ramping rate */
+		unsigned char	env_offset[ 6 ]; /* 255 == 100% */
+
+	/* 
+	 * The tremolo, vibrato and scale info are not supported yet.
+	 * Enable by setting the mode bits WAVE_TREMOLO, WAVE_VIBRATO or
+	 * WAVE_SCALE
+	 */
+
+		unsigned char	tremolo_sweep;
+		unsigned char	tremolo_rate;
+		unsigned char	tremolo_depth;
+	
+		unsigned char	vibrato_sweep;
+		unsigned char	vibrato_rate;
+		unsigned char	vibrato_depth;
+
+		int		scale_frequency;
+		unsigned int	scale_factor;		/* from 0 to 2048 or 0 to 2 */
+	
+	        int		volume;
+		int		fractions;
+		int		reserved1;
+	        int		spare[2];
+		char data[1];	/* The waveform data starts here */
+	};
+
+struct sysex_info {
+		short key;		/* Use SYSEX_PATCH or MAUI_PATCH here */
+#define SYSEX_PATCH	_PATCHKEY(0x05)
+#define MAUI_PATCH	_PATCHKEY(0x06)
+		short device_no;	/* Synthesizer number */
+		int len;	/* Size of the sysex data in bytes */
+		unsigned char data[1];	/* Sysex data starts here */
+	};
+
+/*
+ * /dev/sequencer input events.
+ *
+ * The data written to the /dev/sequencer is a stream of events. Events
+ * are records of 4 or 8 bytes. The first byte defines the size. 
+ * Any number of events can be written with a write call. There
+ * is a set of macros for sending these events. Use these macros if you
+ * want to maximize portability of your program.
+ *
+ * Events SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO. Are also input events.
+ * (All input events are currently 4 bytes long. Be prepared to support
+ * 8 byte events also. If you receive any event having first byte >= 128,
+ * it's a 8 byte event.
+ *
+ * The events are documented at the end of this file.
+ *
+ * Normal events (4 bytes)
+ * There is also a 8 byte version of most of the 4 byte events. The
+ * 8 byte one is recommended.
+ */
+#define SEQ_NOTEOFF		0
+#define SEQ_FMNOTEOFF		SEQ_NOTEOFF	/* Just old name */
+#define SEQ_NOTEON		1
+#define	SEQ_FMNOTEON		SEQ_NOTEON
+#define SEQ_WAIT		TMR_WAIT_ABS
+#define SEQ_PGMCHANGE		3
+#define SEQ_FMPGMCHANGE		SEQ_PGMCHANGE
+#define SEQ_SYNCTIMER		TMR_START
+#define SEQ_MIDIPUTC		5
+#define SEQ_DRUMON		6	/*** OBSOLETE ***/
+#define SEQ_DRUMOFF		7	/*** OBSOLETE ***/
+#define SEQ_ECHO		TMR_ECHO	/* For synching programs with output */
+#define SEQ_AFTERTOUCH		9
+#define SEQ_CONTROLLER		10
+
+/*******************************************
+ *	Midi controller numbers
+ *******************************************
+ * Controllers 0 to 31 (0x00 to 0x1f) and
+ * 32 to 63 (0x20 to 0x3f) are continuous
+ * controllers.
+ * In the MIDI 1.0 these controllers are sent using
+ * two messages. Controller numbers 0 to 31 are used
+ * to send the MSB and the controller numbers 32 to 63
+ * are for the LSB. Note that just 7 bits are used in MIDI bytes.
+ */
+
+#define	   CTL_BANK_SELECT		0x00
+#define	   CTL_MODWHEEL			0x01
+#define    CTL_BREATH			0x02
+/*		undefined		0x03 */
+#define    CTL_FOOT			0x04
+#define    CTL_PORTAMENTO_TIME		0x05
+#define    CTL_DATA_ENTRY		0x06
+#define    CTL_MAIN_VOLUME		0x07
+#define    CTL_BALANCE			0x08
+/*		undefined		0x09 */
+#define    CTL_PAN			0x0a
+#define    CTL_EXPRESSION		0x0b
+/*		undefined		0x0c */
+/*		undefined		0x0d */
+/*		undefined		0x0e */
+/*		undefined		0x0f */
+#define    CTL_GENERAL_PURPOSE1	0x10
+#define    CTL_GENERAL_PURPOSE2	0x11
+#define    CTL_GENERAL_PURPOSE3	0x12
+#define    CTL_GENERAL_PURPOSE4	0x13
+/*		undefined		0x14 - 0x1f */
+
+/*		undefined		0x20 */
+/* The controller numbers 0x21 to 0x3f are reserved for the */
+/* least significant bytes of the controllers 0x00 to 0x1f. */
+/* These controllers are not recognised by the driver. */
+
+/* Controllers 64 to 69 (0x40 to 0x45) are on/off switches. */
+/* 0=OFF and 127=ON (intermediate values are possible) */
+#define    CTL_DAMPER_PEDAL		0x40
+#define    CTL_SUSTAIN			0x40	/* Alias */
+#define    CTL_HOLD			0x40	/* Alias */
+#define    CTL_PORTAMENTO		0x41
+#define    CTL_SOSTENUTO		0x42
+#define    CTL_SOFT_PEDAL		0x43
+/*		undefined		0x44 */
+#define    CTL_HOLD2			0x45
+/*		undefined		0x46 - 0x4f */
+
+#define    CTL_GENERAL_PURPOSE5	0x50
+#define    CTL_GENERAL_PURPOSE6	0x51
+#define    CTL_GENERAL_PURPOSE7	0x52
+#define    CTL_GENERAL_PURPOSE8	0x53
+/*		undefined		0x54 - 0x5a */
+#define    CTL_EXT_EFF_DEPTH		0x5b
+#define    CTL_TREMOLO_DEPTH		0x5c
+#define    CTL_CHORUS_DEPTH		0x5d
+#define    CTL_DETUNE_DEPTH		0x5e
+#define    CTL_CELESTE_DEPTH		0x5e	/* Alias for the above one */
+#define    CTL_PHASER_DEPTH		0x5f
+#define    CTL_DATA_INCREMENT		0x60
+#define    CTL_DATA_DECREMENT		0x61
+#define    CTL_NONREG_PARM_NUM_LSB	0x62
+#define    CTL_NONREG_PARM_NUM_MSB	0x63
+#define    CTL_REGIST_PARM_NUM_LSB	0x64
+#define    CTL_REGIST_PARM_NUM_MSB	0x65
+/*		undefined		0x66 - 0x78 */
+/*		reserved		0x79 - 0x7f */
+
+/* Pseudo controllers (not midi compatible) */
+#define    CTRL_PITCH_BENDER		255
+#define    CTRL_PITCH_BENDER_RANGE	254
+#define    CTRL_EXPRESSION		253	/* Obsolete */
+#define    CTRL_MAIN_VOLUME		252	/* Obsolete */
+#define SEQ_BALANCE		11
+#define SEQ_VOLMODE             12
+
+/*
+ * Volume mode decides how volumes are used
+ */
+
+#define VOL_METHOD_ADAGIO	1
+#define VOL_METHOD_LINEAR	2
+
+/*
+ * Note! SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO are used also as
+ *	 input events.
+ */
+
+/*
+ * Event codes 0xf0 to 0xfc are reserved for future extensions.
+ */
+
+#define SEQ_FULLSIZE		0xfd	/* Long events */
+/*
+ *	SEQ_FULLSIZE events are used for loading patches/samples to the
+ *	synthesizer devices. These events are passed directly to the driver
+ *	of the associated synthesizer device. There is no limit to the size
+ *	of the extended events. These events are not queued but executed
+ *	immediately when the write() is called (execution can take several
+ *	seconds of time). 
+ *
+ *	When a SEQ_FULLSIZE message is written to the device, it must
+ *	be written using exactly one write() call. Other events cannot
+ *	be mixed to the same write.
+ *	
+ *	For FM synths (YM3812/OPL3) use struct sbi_instrument and write it to the 
+ *	/dev/sequencer. Don't write other data together with the instrument structure
+ *	Set the key field of the structure to FM_PATCH. The device field is used to
+ *	route the patch to the corresponding device.
+ *
+ *	For wave table use struct patch_info. Initialize the key field
+ *      to WAVE_PATCH.
+ */
+#define SEQ_PRIVATE		0xfe	/* Low level HW dependent events (8 bytes) */
+#define SEQ_EXTENDED		0xff	/* Extended events (8 bytes) OBSOLETE */
+
+/*
+ * Record for FM patches
+ */
+
+typedef unsigned char sbi_instr_data[32];
+
+struct sbi_instrument {
+		unsigned short	key;	/* FM_PATCH or OPL3_PATCH */
+#define FM_PATCH	_PATCHKEY(0x01)
+#define OPL3_PATCH	_PATCHKEY(0x03)
+		short		device;		/*	Synth# (0-4)	*/
+		int 		channel;	/*	Program# to be initialized 	*/
+		sbi_instr_data	operators;	/*	Register settings for operator cells (.SBI format)	*/
+	};
+
+struct synth_info {	/* Read only */
+		char	name[30];
+		int	device;		/* 0-N. INITIALIZE BEFORE CALLING */
+		int	synth_type;
+#define SYNTH_TYPE_FM			0
+#define SYNTH_TYPE_SAMPLE		1
+#define SYNTH_TYPE_MIDI			2	/* Midi interface */
+
+		int	synth_subtype;
+#define FM_TYPE_ADLIB			0x00
+#define FM_TYPE_OPL3			0x01
+#define MIDI_TYPE_MPU401		0x401
+
+#define SAMPLE_TYPE_BASIC		0x10
+#define SAMPLE_TYPE_GUS			SAMPLE_TYPE_BASIC
+#define SAMPLE_TYPE_WAVEFRONT           0x11
+
+		int	perc_mode;	/* No longer supported */
+		int	nr_voices;
+		int	nr_drums;	/* Obsolete field */
+		int	instr_bank_size;
+		unsigned int	capabilities;	
+#define SYNTH_CAP_PERCMODE		0x00000001 /* No longer used */
+#define SYNTH_CAP_OPL3			0x00000002 /* Set if OPL3 supported */
+#define SYNTH_CAP_INPUT			0x00000004 /* Input (MIDI) device */
+		int	dummies[19];	/* Reserve space */
+	};
+
+struct sound_timer_info {
+		char name[32];
+		int caps;
+	};
+
+#define MIDI_CAP_MPU401		1		/* MPU-401 intelligent mode */
+
+struct midi_info {
+		char		name[30];
+		int		device;		/* 0-N. INITIALIZE BEFORE CALLING */
+		unsigned int	capabilities;	/* To be defined later */
+		int		dev_type;
+		int		dummies[18];	/* Reserve space */
+	};
+
+/********************************************
+ * ioctl commands for the /dev/midi##
+ */
+typedef struct {
+		unsigned char cmd;
+		char nr_args, nr_returns;
+		unsigned char data[30];
+	} mpu_command_rec;
+
+#define SNDCTL_MIDI_PRETIME		_SIOWR('m', 0, int)
+#define SNDCTL_MIDI_MPUMODE		_SIOWR('m', 1, int)
+#define SNDCTL_MIDI_MPUCMD		_SIOWR('m', 2, mpu_command_rec)
+
+/********************************************
+ * IOCTL commands for /dev/dsp and /dev/audio
+ */
+
+#define SNDCTL_DSP_RESET		_SIO  ('P', 0)
+#define SNDCTL_DSP_SYNC			_SIO  ('P', 1)
+#define SNDCTL_DSP_SPEED		_SIOWR('P', 2, int)
+#define SNDCTL_DSP_STEREO		_SIOWR('P', 3, int)
+#define SNDCTL_DSP_GETBLKSIZE		_SIOWR('P', 4, int)
+#define SNDCTL_DSP_SAMPLESIZE		SNDCTL_DSP_SETFMT
+#define SNDCTL_DSP_CHANNELS		_SIOWR('P', 6, int)
+#define SOUND_PCM_WRITE_CHANNELS	SNDCTL_DSP_CHANNELS
+#define SOUND_PCM_WRITE_FILTER		_SIOWR('P', 7, int)
+#define SNDCTL_DSP_POST			_SIO  ('P', 8)
+#define SNDCTL_DSP_SUBDIVIDE		_SIOWR('P', 9, int)
+#define SNDCTL_DSP_SETFRAGMENT		_SIOWR('P',10, int)
+
+/*	Audio data formats (Note! U8=8 and S16_LE=16 for compatibility) */
+#define SNDCTL_DSP_GETFMTS		_SIOR ('P',11, int) /* Returns a mask */
+#define SNDCTL_DSP_SETFMT		_SIOWR('P',5, int) /* Selects ONE fmt*/
+#	define AFMT_QUERY		0x00000000	/* Return current fmt */
+#	define AFMT_MU_LAW		0x00000001
+#	define AFMT_A_LAW		0x00000002
+#	define AFMT_IMA_ADPCM		0x00000004
+#	define AFMT_U8			0x00000008
+#	define AFMT_S16_LE		0x00000010	/* Little endian signed 16*/
+#	define AFMT_S16_BE		0x00000020	/* Big endian signed 16 */
+#	define AFMT_S8			0x00000040
+#	define AFMT_U16_LE		0x00000080	/* Little endian U16 */
+#	define AFMT_U16_BE		0x00000100	/* Big endian U16 */
+#	define AFMT_MPEG		0x00000200	/* MPEG (2) audio */
+#	define AFMT_AC3		0x00000400	/* Dolby Digital AC3 */
+
+/*
+ * Buffer status queries.
+ */
+typedef struct audio_buf_info {
+			int fragments;	/* # of available fragments (partially usend ones not counted) */
+			int fragstotal;	/* Total # of fragments allocated */
+			int fragsize;	/* Size of a fragment in bytes */
+
+			int bytes;	/* Available space in bytes (includes partially used fragments) */
+			/* Note! 'bytes' could be more than fragments*fragsize */
+		} audio_buf_info;
+
+#define SNDCTL_DSP_GETOSPACE		_SIOR ('P',12, audio_buf_info)
+#define SNDCTL_DSP_GETISPACE		_SIOR ('P',13, audio_buf_info)
+#define SNDCTL_DSP_NONBLOCK		_SIO  ('P',14)
+#define SNDCTL_DSP_GETCAPS		_SIOR ('P',15, int)
+#	define DSP_CAP_REVISION		0x000000ff	/* Bits for revision level (0 to 255) */
+#	define DSP_CAP_DUPLEX		0x00000100	/* Full duplex record/playback */
+#	define DSP_CAP_REALTIME		0x00000200	/* Real time capability */
+#	define DSP_CAP_BATCH		0x00000400	/* Device has some kind of */
+							/* internal buffers which may */
+							/* cause some delays and */
+							/* decrease precision of timing */
+#	define DSP_CAP_COPROC		0x00000800	/* Has a coprocessor */
+							/* Sometimes it's a DSP */
+							/* but usually not */
+#	define DSP_CAP_TRIGGER		0x00001000	/* Supports SETTRIGGER */
+#	define DSP_CAP_MMAP		0x00002000	/* Supports mmap() */
+#	define DSP_CAP_MULTI		0x00004000	/* support multiple open */
+#	define DSP_CAP_BIND		0x00008000	/* channel binding to front/rear/cneter/lfe */
+
+
+#define SNDCTL_DSP_GETTRIGGER		_SIOR ('P',16, int)
+#define SNDCTL_DSP_SETTRIGGER		_SIOW ('P',16, int)
+#	define PCM_ENABLE_INPUT		0x00000001
+#	define PCM_ENABLE_OUTPUT		0x00000002
+
+typedef struct count_info {
+		int bytes;	/* Total # of bytes processed */
+		int blocks;	/* # of fragment transitions since last time */
+		int ptr;	/* Current DMA pointer value */
+	} count_info;
+
+#define SNDCTL_DSP_GETIPTR		_SIOR ('P',17, count_info)
+#define SNDCTL_DSP_GETOPTR		_SIOR ('P',18, count_info)
+
+typedef struct buffmem_desc {
+		unsigned *buffer;
+		int size;
+	} buffmem_desc;
+#define SNDCTL_DSP_MAPINBUF		_SIOR ('P', 19, buffmem_desc)
+#define SNDCTL_DSP_MAPOUTBUF		_SIOR ('P', 20, buffmem_desc)
+#define SNDCTL_DSP_SETSYNCRO		_SIO  ('P', 21)
+#define SNDCTL_DSP_SETDUPLEX		_SIO  ('P', 22)
+#define SNDCTL_DSP_GETODELAY		_SIOR ('P', 23, int)
+
+#define SNDCTL_DSP_GETCHANNELMASK		_SIOWR('P', 64, int)
+#define SNDCTL_DSP_BIND_CHANNEL		_SIOWR('P', 65, int)
+#	define DSP_BIND_QUERY		0x00000000
+#	define DSP_BIND_FRONT		0x00000001
+#	define DSP_BIND_SURR		0x00000002
+#	define DSP_BIND_CENTER_LFE	0x00000004
+#	define DSP_BIND_HANDSET		0x00000008
+#	define DSP_BIND_MIC		0x00000010
+#	define DSP_BIND_MODEM1		0x00000020
+#	define DSP_BIND_MODEM2		0x00000040
+#	define DSP_BIND_I2S		0x00000080
+#	define DSP_BIND_SPDIF		0x00000100
+
+#define SNDCTL_DSP_SETSPDIF		_SIOW ('P', 66, int)
+#define SNDCTL_DSP_GETSPDIF		_SIOR ('P', 67, int)
+#	define SPDIF_PRO	0x0001
+#	define SPDIF_N_AUD	0x0002
+#	define SPDIF_COPY	0x0004
+#	define SPDIF_PRE	0x0008
+#	define SPDIF_CC		0x07f0
+#	define SPDIF_L		0x0800
+#	define SPDIF_DRS	0x4000
+#	define SPDIF_V		0x8000
+
+/*
+ * Application's profile defines the way how playback underrun situations should be handled.
+ * 
+ *	APF_NORMAL (the default) and APF_NETWORK make the driver to cleanup the
+ *	playback buffer whenever an underrun occurs. This consumes some time
+ *	prevents looping the existing buffer.
+ *	APF_CPUINTENS is intended to be set by CPU intensive applications which
+ *	are likely to run out of time occasionally. In this mode the buffer cleanup is
+ *	disabled which saves CPU time but also let's the previous buffer content to
+ *	be played during the "pause" after the underrun.
+ */
+#define SNDCTL_DSP_PROFILE		_SIOW ('P', 23, int)
+#define	  APF_NORMAL	0	/* Normal applications */
+#define	  APF_NETWORK	1	/* Underruns probably caused by an "external" delay */
+#define   APF_CPUINTENS 2	/* Underruns probably caused by "overheating" the CPU */
+
+#define SOUND_PCM_READ_RATE		_SIOR ('P', 2, int)
+#define SOUND_PCM_READ_CHANNELS		_SIOR ('P', 6, int)
+#define SOUND_PCM_READ_BITS		_SIOR ('P', 5, int)
+#define SOUND_PCM_READ_FILTER		_SIOR ('P', 7, int)
+
+/* Some alias names */
+#define SOUND_PCM_WRITE_BITS		SNDCTL_DSP_SETFMT
+#define SOUND_PCM_WRITE_RATE		SNDCTL_DSP_SPEED
+#define SOUND_PCM_POST			SNDCTL_DSP_POST
+#define SOUND_PCM_RESET			SNDCTL_DSP_RESET
+#define SOUND_PCM_SYNC			SNDCTL_DSP_SYNC
+#define SOUND_PCM_SUBDIVIDE		SNDCTL_DSP_SUBDIVIDE
+#define SOUND_PCM_SETFRAGMENT		SNDCTL_DSP_SETFRAGMENT
+#define SOUND_PCM_GETFMTS		SNDCTL_DSP_GETFMTS
+#define SOUND_PCM_SETFMT		SNDCTL_DSP_SETFMT
+#define SOUND_PCM_GETOSPACE		SNDCTL_DSP_GETOSPACE
+#define SOUND_PCM_GETISPACE		SNDCTL_DSP_GETISPACE
+#define SOUND_PCM_NONBLOCK		SNDCTL_DSP_NONBLOCK
+#define SOUND_PCM_GETCAPS		SNDCTL_DSP_GETCAPS
+#define SOUND_PCM_GETTRIGGER		SNDCTL_DSP_GETTRIGGER
+#define SOUND_PCM_SETTRIGGER		SNDCTL_DSP_SETTRIGGER
+#define SOUND_PCM_SETSYNCRO		SNDCTL_DSP_SETSYNCRO
+#define SOUND_PCM_GETIPTR		SNDCTL_DSP_GETIPTR
+#define SOUND_PCM_GETOPTR		SNDCTL_DSP_GETOPTR
+#define SOUND_PCM_MAPINBUF		SNDCTL_DSP_MAPINBUF
+#define SOUND_PCM_MAPOUTBUF		SNDCTL_DSP_MAPOUTBUF
+
+/*
+ * ioctl calls to be used in communication with coprocessors and
+ * DSP chips.
+ */
+
+typedef struct copr_buffer {
+		int command;	/* Set to 0 if not used */
+		int flags;
+#define CPF_NONE		0x0000
+#define CPF_FIRST		0x0001	/* First block */
+#define CPF_LAST		0x0002	/* Last block */
+		int len;
+		int offs;	/* If required by the device (0 if not used) */
+
+		unsigned char data[4000]; /* NOTE! 4000 is not 4k */
+	} copr_buffer;
+
+typedef struct copr_debug_buf {
+		int command;	/* Used internally. Set to 0 */
+		int parm1;
+		int parm2;
+		int flags;	
+		int len;	/* Length of data in bytes */
+	} copr_debug_buf;
+
+typedef struct copr_msg {
+		int len;
+		unsigned char data[4000];
+	} copr_msg;
+
+#define SNDCTL_COPR_RESET             _SIO  ('C',  0)
+#define SNDCTL_COPR_LOAD	      _SIOWR('C',  1, copr_buffer)
+#define SNDCTL_COPR_RDATA	      _SIOWR('C',  2, copr_debug_buf)
+#define SNDCTL_COPR_RCODE	      _SIOWR('C',  3, copr_debug_buf)
+#define SNDCTL_COPR_WDATA	      _SIOW ('C',  4, copr_debug_buf)
+#define SNDCTL_COPR_WCODE	      _SIOW ('C',  5, copr_debug_buf)
+#define SNDCTL_COPR_RUN		      _SIOWR('C',  6, copr_debug_buf)
+#define SNDCTL_COPR_HALT	      _SIOWR('C',  7, copr_debug_buf)
+#define SNDCTL_COPR_SENDMSG	      _SIOWR('C',  8, copr_msg)
+#define SNDCTL_COPR_RCVMSG	      _SIOR ('C',  9, copr_msg)
+
+/*********************************************
+ * IOCTL commands for /dev/mixer
+ */
+	
+/* 
+ * Mixer devices
+ *
+ * There can be up to 20 different analog mixer channels. The
+ * SOUND_MIXER_NRDEVICES gives the currently supported maximum. 
+ * The SOUND_MIXER_READ_DEVMASK returns a bitmask which tells
+ * the devices supported by the particular mixer.
+ */
+
+#define SOUND_MIXER_NRDEVICES	25
+#define SOUND_MIXER_VOLUME	0
+#define SOUND_MIXER_BASS	1
+#define SOUND_MIXER_TREBLE	2
+#define SOUND_MIXER_SYNTH	3
+#define SOUND_MIXER_PCM		4
+#define SOUND_MIXER_SPEAKER	5
+#define SOUND_MIXER_LINE	6
+#define SOUND_MIXER_MIC		7
+#define SOUND_MIXER_CD		8
+#define SOUND_MIXER_IMIX	9	/*  Recording monitor  */
+#define SOUND_MIXER_ALTPCM	10
+#define SOUND_MIXER_RECLEV	11	/* Recording level */
+#define SOUND_MIXER_IGAIN	12	/* Input gain */
+#define SOUND_MIXER_OGAIN	13	/* Output gain */
+/* 
+ * The AD1848 codec and compatibles have three line level inputs
+ * (line, aux1 and aux2). Since each card manufacturer have assigned
+ * different meanings to these inputs, it's inpractical to assign
+ * specific meanings (line, cd, synth etc.) to them.
+ */
+#define SOUND_MIXER_LINE1	14	/* Input source 1  (aux1) */
+#define SOUND_MIXER_LINE2	15	/* Input source 2  (aux2) */
+#define SOUND_MIXER_LINE3	16	/* Input source 3  (line) */
+#define SOUND_MIXER_DIGITAL1	17	/* Digital (input) 1 */
+#define SOUND_MIXER_DIGITAL2	18	/* Digital (input) 2 */
+#define SOUND_MIXER_DIGITAL3	19	/* Digital (input) 3 */
+#define SOUND_MIXER_PHONEIN	20	/* Phone input */
+#define SOUND_MIXER_PHONEOUT	21	/* Phone output */
+#define SOUND_MIXER_VIDEO	22	/* Video/TV (audio) in */
+#define SOUND_MIXER_RADIO	23	/* Radio in */
+#define SOUND_MIXER_MONITOR	24	/* Monitor (usually mic) volume */
+
+/* Some on/off settings (SOUND_SPECIAL_MIN - SOUND_SPECIAL_MAX) */
+/* Not counted to SOUND_MIXER_NRDEVICES, but use the same number space */
+#define SOUND_ONOFF_MIN		28
+#define SOUND_ONOFF_MAX		30
+
+/* Note!	Number 31 cannot be used since the sign bit is reserved */
+#define SOUND_MIXER_NONE	31
+
+/*
+ * The following unsupported macros are no longer functional.
+ * Use SOUND_MIXER_PRIVATE# macros in future.
+ */
+#define SOUND_MIXER_ENHANCE	SOUND_MIXER_NONE
+#define SOUND_MIXER_MUTE	SOUND_MIXER_NONE
+#define SOUND_MIXER_LOUD	SOUND_MIXER_NONE
+
+
+#define SOUND_DEVICE_LABELS	{"Vol  ", "Bass ", "Trebl", "Synth", "Pcm  ", "Spkr ", "Line ", \
+				 "Mic  ", "CD   ", "Mix  ", "Pcm2 ", "Rec  ", "IGain", "OGain", \
+				 "Line1", "Line2", "Line3", "Digital1", "Digital2", "Digital3", \
+				 "PhoneIn", "PhoneOut", "Video", "Radio", "Monitor"}
+
+#define SOUND_DEVICE_NAMES	{"vol", "bass", "treble", "synth", "pcm", "speaker", "line", \
+				 "mic", "cd", "mix", "pcm2", "rec", "igain", "ogain", \
+				 "line1", "line2", "line3", "dig1", "dig2", "dig3", \
+				 "phin", "phout", "video", "radio", "monitor"}
+
+/*	Device bitmask identifiers	*/
+
+#define SOUND_MIXER_RECSRC	0xff	/* Arg contains a bit for each recording source */
+#define SOUND_MIXER_DEVMASK	0xfe	/* Arg contains a bit for each supported device */
+#define SOUND_MIXER_RECMASK	0xfd	/* Arg contains a bit for each supported recording source */
+#define SOUND_MIXER_CAPS	0xfc
+#	define SOUND_CAP_EXCL_INPUT	0x00000001	/* Only one recording source at a time */
+#define SOUND_MIXER_STEREODEVS	0xfb	/* Mixer channels supporting stereo */
+#define SOUND_MIXER_OUTSRC	0xfa	/* Arg contains a bit for each input source to output */
+#define SOUND_MIXER_OUTMASK	0xf9	/* Arg contains a bit for each supported input source to output */
+
+/*	Device mask bits	*/
+
+#define SOUND_MASK_VOLUME	(1 << SOUND_MIXER_VOLUME)
+#define SOUND_MASK_BASS		(1 << SOUND_MIXER_BASS)
+#define SOUND_MASK_TREBLE	(1 << SOUND_MIXER_TREBLE)
+#define SOUND_MASK_SYNTH	(1 << SOUND_MIXER_SYNTH)
+#define SOUND_MASK_PCM		(1 << SOUND_MIXER_PCM)
+#define SOUND_MASK_SPEAKER	(1 << SOUND_MIXER_SPEAKER)
+#define SOUND_MASK_LINE		(1 << SOUND_MIXER_LINE)
+#define SOUND_MASK_MIC		(1 << SOUND_MIXER_MIC)
+#define SOUND_MASK_CD		(1 << SOUND_MIXER_CD)
+#define SOUND_MASK_IMIX		(1 << SOUND_MIXER_IMIX)
+#define SOUND_MASK_ALTPCM	(1 << SOUND_MIXER_ALTPCM)
+#define SOUND_MASK_RECLEV	(1 << SOUND_MIXER_RECLEV)
+#define SOUND_MASK_IGAIN	(1 << SOUND_MIXER_IGAIN)
+#define SOUND_MASK_OGAIN	(1 << SOUND_MIXER_OGAIN)
+#define SOUND_MASK_LINE1	(1 << SOUND_MIXER_LINE1)
+#define SOUND_MASK_LINE2	(1 << SOUND_MIXER_LINE2)
+#define SOUND_MASK_LINE3	(1 << SOUND_MIXER_LINE3)
+#define SOUND_MASK_DIGITAL1	(1 << SOUND_MIXER_DIGITAL1)
+#define SOUND_MASK_DIGITAL2	(1 << SOUND_MIXER_DIGITAL2)
+#define SOUND_MASK_DIGITAL3	(1 << SOUND_MIXER_DIGITAL3)
+#define SOUND_MASK_PHONEIN	(1 << SOUND_MIXER_PHONEIN)
+#define SOUND_MASK_PHONEOUT	(1 << SOUND_MIXER_PHONEOUT)
+#define SOUND_MASK_RADIO	(1 << SOUND_MIXER_RADIO)
+#define SOUND_MASK_VIDEO	(1 << SOUND_MIXER_VIDEO)
+#define SOUND_MASK_MONITOR	(1 << SOUND_MIXER_MONITOR)
+
+/* Obsolete macros */
+#define SOUND_MASK_MUTE		(1 << SOUND_MIXER_MUTE)
+#define SOUND_MASK_ENHANCE	(1 << SOUND_MIXER_ENHANCE)
+#define SOUND_MASK_LOUD		(1 << SOUND_MIXER_LOUD)
+
+#define MIXER_READ(dev)		_SIOR('M', dev, int)
+#define SOUND_MIXER_READ_VOLUME		MIXER_READ(SOUND_MIXER_VOLUME)
+#define SOUND_MIXER_READ_BASS		MIXER_READ(SOUND_MIXER_BASS)
+#define SOUND_MIXER_READ_TREBLE		MIXER_READ(SOUND_MIXER_TREBLE)
+#define SOUND_MIXER_READ_SYNTH		MIXER_READ(SOUND_MIXER_SYNTH)
+#define SOUND_MIXER_READ_PCM		MIXER_READ(SOUND_MIXER_PCM)
+#define SOUND_MIXER_READ_SPEAKER	MIXER_READ(SOUND_MIXER_SPEAKER)
+#define SOUND_MIXER_READ_LINE		MIXER_READ(SOUND_MIXER_LINE)
+#define SOUND_MIXER_READ_MIC		MIXER_READ(SOUND_MIXER_MIC)
+#define SOUND_MIXER_READ_CD		MIXER_READ(SOUND_MIXER_CD)
+#define SOUND_MIXER_READ_IMIX		MIXER_READ(SOUND_MIXER_IMIX)
+#define SOUND_MIXER_READ_ALTPCM		MIXER_READ(SOUND_MIXER_ALTPCM)
+#define SOUND_MIXER_READ_RECLEV		MIXER_READ(SOUND_MIXER_RECLEV)
+#define SOUND_MIXER_READ_IGAIN		MIXER_READ(SOUND_MIXER_IGAIN)
+#define SOUND_MIXER_READ_OGAIN		MIXER_READ(SOUND_MIXER_OGAIN)
+#define SOUND_MIXER_READ_LINE1		MIXER_READ(SOUND_MIXER_LINE1)
+#define SOUND_MIXER_READ_LINE2		MIXER_READ(SOUND_MIXER_LINE2)
+#define SOUND_MIXER_READ_LINE3		MIXER_READ(SOUND_MIXER_LINE3)
+
+/* Obsolete macros */
+#define SOUND_MIXER_READ_MUTE		MIXER_READ(SOUND_MIXER_MUTE)
+#define SOUND_MIXER_READ_ENHANCE	MIXER_READ(SOUND_MIXER_ENHANCE)
+#define SOUND_MIXER_READ_LOUD		MIXER_READ(SOUND_MIXER_LOUD)
+
+#define SOUND_MIXER_READ_RECSRC		MIXER_READ(SOUND_MIXER_RECSRC)
+#define SOUND_MIXER_READ_DEVMASK	MIXER_READ(SOUND_MIXER_DEVMASK)
+#define SOUND_MIXER_READ_RECMASK	MIXER_READ(SOUND_MIXER_RECMASK)
+#define SOUND_MIXER_READ_STEREODEVS	MIXER_READ(SOUND_MIXER_STEREODEVS)
+#define SOUND_MIXER_READ_CAPS		MIXER_READ(SOUND_MIXER_CAPS)
+
+#define MIXER_WRITE(dev)		_SIOWR('M', dev, int)
+#define SOUND_MIXER_WRITE_VOLUME	MIXER_WRITE(SOUND_MIXER_VOLUME)
+#define SOUND_MIXER_WRITE_BASS		MIXER_WRITE(SOUND_MIXER_BASS)
+#define SOUND_MIXER_WRITE_TREBLE	MIXER_WRITE(SOUND_MIXER_TREBLE)
+#define SOUND_MIXER_WRITE_SYNTH		MIXER_WRITE(SOUND_MIXER_SYNTH)
+#define SOUND_MIXER_WRITE_PCM		MIXER_WRITE(SOUND_MIXER_PCM)
+#define SOUND_MIXER_WRITE_SPEAKER	MIXER_WRITE(SOUND_MIXER_SPEAKER)
+#define SOUND_MIXER_WRITE_LINE		MIXER_WRITE(SOUND_MIXER_LINE)
+#define SOUND_MIXER_WRITE_MIC		MIXER_WRITE(SOUND_MIXER_MIC)
+#define SOUND_MIXER_WRITE_CD		MIXER_WRITE(SOUND_MIXER_CD)
+#define SOUND_MIXER_WRITE_IMIX		MIXER_WRITE(SOUND_MIXER_IMIX)
+#define SOUND_MIXER_WRITE_ALTPCM	MIXER_WRITE(SOUND_MIXER_ALTPCM)
+#define SOUND_MIXER_WRITE_RECLEV	MIXER_WRITE(SOUND_MIXER_RECLEV)
+#define SOUND_MIXER_WRITE_IGAIN		MIXER_WRITE(SOUND_MIXER_IGAIN)
+#define SOUND_MIXER_WRITE_OGAIN		MIXER_WRITE(SOUND_MIXER_OGAIN)
+#define SOUND_MIXER_WRITE_LINE1		MIXER_WRITE(SOUND_MIXER_LINE1)
+#define SOUND_MIXER_WRITE_LINE2		MIXER_WRITE(SOUND_MIXER_LINE2)
+#define SOUND_MIXER_WRITE_LINE3		MIXER_WRITE(SOUND_MIXER_LINE3)
+
+/* Obsolete macros */
+#define SOUND_MIXER_WRITE_MUTE		MIXER_WRITE(SOUND_MIXER_MUTE)
+#define SOUND_MIXER_WRITE_ENHANCE	MIXER_WRITE(SOUND_MIXER_ENHANCE)
+#define SOUND_MIXER_WRITE_LOUD		MIXER_WRITE(SOUND_MIXER_LOUD)
+
+#define SOUND_MIXER_WRITE_RECSRC	MIXER_WRITE(SOUND_MIXER_RECSRC)
+
+typedef struct mixer_info
+{
+  char id[16];
+  char name[32];
+  int  modify_counter;
+  int fillers[10];
+} mixer_info;
+
+typedef struct _old_mixer_info /* Obsolete */
+{
+  char id[16];
+  char name[32];
+} _old_mixer_info;
+
+#define SOUND_MIXER_INFO		_SIOR ('M', 101, mixer_info)
+#define SOUND_OLD_MIXER_INFO		_SIOR ('M', 101, _old_mixer_info)
+
+/*
+ * A mechanism for accessing "proprietary" mixer features. This method
+ * permits passing 128 bytes of arbitrary data between a mixer application
+ * and the mixer driver. Interpretation of the record is defined by
+ * the particular mixer driver.
+ */
+typedef unsigned char mixer_record[128];
+
+#define SOUND_MIXER_ACCESS		_SIOWR('M', 102, mixer_record)
+
+/*
+ * Two ioctls for special souncard function
+ */
+#define SOUND_MIXER_AGC  _SIOWR('M', 103, int)
+#define SOUND_MIXER_3DSE  _SIOWR('M', 104, int)
+
+/*
+ * The SOUND_MIXER_PRIVATE# commands can be redefined by low level drivers.
+ * These features can be used when accessing device specific features.
+ */
+#define SOUND_MIXER_PRIVATE1		_SIOWR('M', 111, int)
+#define SOUND_MIXER_PRIVATE2		_SIOWR('M', 112, int)
+#define SOUND_MIXER_PRIVATE3		_SIOWR('M', 113, int)
+#define SOUND_MIXER_PRIVATE4		_SIOWR('M', 114, int)
+#define SOUND_MIXER_PRIVATE5		_SIOWR('M', 115, int)
+
+/*
+ * SOUND_MIXER_GETLEVELS and SOUND_MIXER_SETLEVELS calls can be used
+ * for querying current mixer settings from the driver and for loading
+ * default volume settings _prior_ activating the mixer (loading
+ * doesn't affect current state of the mixer hardware). These calls
+ * are for internal use only.
+ */
+
+typedef struct mixer_vol_table {
+  int num;	/* Index to volume table */
+  char name[32];
+  int levels[32];
+} mixer_vol_table;
+
+#define SOUND_MIXER_GETLEVELS		_SIOWR('M', 116, mixer_vol_table)
+#define SOUND_MIXER_SETLEVELS		_SIOWR('M', 117, mixer_vol_table)
+
+/* 
+ * An ioctl for identifying the driver version. It will return value
+ * of the SOUND_VERSION macro used when compiling the driver.
+ * This call was introduced in OSS version 3.6 and it will not work
+ * with earlier versions (returns EINVAL).
+ */
+#define OSS_GETVERSION			_SIOR ('M', 118, int)
+
+/*
+ * Level 2 event types for /dev/sequencer
+ */
+
+/*
+ * The 4 most significant bits of byte 0 specify the class of
+ * the event: 
+ *
+ *	0x8X = system level events,
+ *	0x9X = device/port specific events, event[1] = device/port,
+ *		The last 4 bits give the subtype:
+ *			0x02	= Channel event (event[3] = chn).
+ *			0x01	= note event (event[4] = note).
+ *			(0x01 is not used alone but always with bit 0x02).
+ *	       event[2] = MIDI message code (0x80=note off etc.)
+ *
+ */
+
+#define EV_SEQ_LOCAL		0x80
+#define EV_TIMING		0x81
+#define EV_CHN_COMMON		0x92
+#define EV_CHN_VOICE		0x93
+#define EV_SYSEX		0x94
+/*
+ * Event types 200 to 220 are reserved for application use.
+ * These numbers will not be used by the driver.
+ */
+
+/*
+ * Events for event type EV_CHN_VOICE
+ */
+
+#define MIDI_NOTEOFF		0x80
+#define MIDI_NOTEON		0x90
+#define MIDI_KEY_PRESSURE	0xA0
+
+/*
+ * Events for event type EV_CHN_COMMON
+ */
+
+#define MIDI_CTL_CHANGE		0xB0
+#define MIDI_PGM_CHANGE		0xC0
+#define MIDI_CHN_PRESSURE	0xD0
+#define MIDI_PITCH_BEND		0xE0
+
+#define MIDI_SYSTEM_PREFIX	0xF0
+
+/*
+ * Timer event types
+ */
+#define TMR_WAIT_REL		1	/* Time relative to the prev time */
+#define TMR_WAIT_ABS		2	/* Absolute time since TMR_START */
+#define TMR_STOP		3
+#define TMR_START		4
+#define TMR_CONTINUE		5
+#define TMR_TEMPO		6
+#define TMR_ECHO		8
+#define TMR_CLOCK		9	/* MIDI clock */
+#define TMR_SPP			10	/* Song position pointer */
+#define TMR_TIMESIG		11	/* Time signature */
+
+/*
+ *	Local event types
+ */
+#define LOCL_STARTAUDIO		1
+
+#if !defined(__KERNEL__) || defined(USE_SEQ_MACROS)
+/*
+ *	Some convenience macros to simplify programming of the
+ *	/dev/sequencer interface
+ *
+ *	This is a legacy interface for applications written against
+ *	the OSSlib-3.8 style interface. It is no longer possible
+ *	to actually link against OSSlib with this header, but we
+ *	still provide these macros for programs using them.
+ *
+ *	If you want to use OSSlib, it is recommended that you get
+ *	the GPL version of OSS-4.x and build against that version
+ *	of the header.
+ *
+ *	We redefine the extern keyword so that make headers_check
+ *	does not complain about SEQ_USE_EXTBUF.
+ */
+#define SEQ_DECLAREBUF()		SEQ_USE_EXTBUF()
+
+void seqbuf_dump(void);	/* This function must be provided by programs */
+
+#define SEQ_PM_DEFINES int __foo_bar___
+
+#define SEQ_LOAD_GMINSTR(dev, instr)
+#define SEQ_LOAD_GMDRUM(dev, drum)
+
+#define _SEQ_EXTERN extern
+#define SEQ_USE_EXTBUF() \
+		_SEQ_EXTERN unsigned char _seqbuf[]; \
+		_SEQ_EXTERN int _seqbuflen; _SEQ_EXTERN int _seqbufptr
+
+#ifndef USE_SIMPLE_MACROS
+/* Sample seqbuf_dump() implementation:
+ *
+ *	SEQ_DEFINEBUF (2048);	-- Defines a buffer for 2048 bytes
+ *
+ *	int seqfd;		-- The file descriptor for /dev/sequencer.
+ *
+ *	void
+ *	seqbuf_dump ()
+ *	{
+ *	  if (_seqbufptr)
+ *	    if (write (seqfd, _seqbuf, _seqbufptr) == -1)
+ *	      {
+ *		perror ("write /dev/sequencer");
+ *		exit (-1);
+ *	      }
+ *	  _seqbufptr = 0;
+ *	}
+ */
+
+#define SEQ_DEFINEBUF(len)		unsigned char _seqbuf[len]; int _seqbuflen = len;int _seqbufptr = 0
+#define _SEQ_NEEDBUF(len)		if ((_seqbufptr+(len)) > _seqbuflen) seqbuf_dump()
+#define _SEQ_ADVBUF(len)		_seqbufptr += len
+#define SEQ_DUMPBUF			seqbuf_dump
+#else
+/*
+ * This variation of the sequencer macros is used just to format one event
+ * using fixed buffer.
+ * 
+ * The program using the macro library must define the following macros before
+ * using this library.
+ *
+ * #define _seqbuf 		 name of the buffer (unsigned char[]) 
+ * #define _SEQ_ADVBUF(len)	 If the applic needs to know the exact
+ *				 size of the event, this macro can be used.
+ *				 Otherwise this must be defined as empty.
+ * #define _seqbufptr		 Define the name of index variable or 0 if
+ *				 not required. 
+ */
+#define _SEQ_NEEDBUF(len)	/* empty */
+#endif
+
+#define SEQ_VOLUME_MODE(dev, mode)	{_SEQ_NEEDBUF(8);\
+					_seqbuf[_seqbufptr] = SEQ_EXTENDED;\
+					_seqbuf[_seqbufptr+1] = SEQ_VOLMODE;\
+					_seqbuf[_seqbufptr+2] = (dev);\
+					_seqbuf[_seqbufptr+3] = (mode);\
+					_seqbuf[_seqbufptr+4] = 0;\
+					_seqbuf[_seqbufptr+5] = 0;\
+					_seqbuf[_seqbufptr+6] = 0;\
+					_seqbuf[_seqbufptr+7] = 0;\
+					_SEQ_ADVBUF(8);}
+
+/*
+ * Midi voice messages
+ */
+
+#define _CHN_VOICE(dev, event, chn, note, parm) \
+					{_SEQ_NEEDBUF(8);\
+					_seqbuf[_seqbufptr] = EV_CHN_VOICE;\
+					_seqbuf[_seqbufptr+1] = (dev);\
+					_seqbuf[_seqbufptr+2] = (event);\
+					_seqbuf[_seqbufptr+3] = (chn);\
+					_seqbuf[_seqbufptr+4] = (note);\
+					_seqbuf[_seqbufptr+5] = (parm);\
+					_seqbuf[_seqbufptr+6] = (0);\
+					_seqbuf[_seqbufptr+7] = 0;\
+					_SEQ_ADVBUF(8);}
+
+#define SEQ_START_NOTE(dev, chn, note, vol) \
+		_CHN_VOICE(dev, MIDI_NOTEON, chn, note, vol)
+
+#define SEQ_STOP_NOTE(dev, chn, note, vol) \
+		_CHN_VOICE(dev, MIDI_NOTEOFF, chn, note, vol)
+
+#define SEQ_KEY_PRESSURE(dev, chn, note, pressure) \
+		_CHN_VOICE(dev, MIDI_KEY_PRESSURE, chn, note, pressure)
+
+/*
+ * Midi channel messages
+ */
+
+#define _CHN_COMMON(dev, event, chn, p1, p2, w14) \
+					{_SEQ_NEEDBUF(8);\
+					_seqbuf[_seqbufptr] = EV_CHN_COMMON;\
+					_seqbuf[_seqbufptr+1] = (dev);\
+					_seqbuf[_seqbufptr+2] = (event);\
+					_seqbuf[_seqbufptr+3] = (chn);\
+					_seqbuf[_seqbufptr+4] = (p1);\
+					_seqbuf[_seqbufptr+5] = (p2);\
+					*(short *)&_seqbuf[_seqbufptr+6] = (w14);\
+					_SEQ_ADVBUF(8);}
+/*
+ * SEQ_SYSEX permits sending of sysex messages. (It may look that it permits
+ * sending any MIDI bytes but it's absolutely not possible. Trying to do
+ * so _will_ cause problems with MPU401 intelligent mode).
+ *
+ * Sysex messages are sent in blocks of 1 to 6 bytes. Longer messages must be 
+ * sent by calling SEQ_SYSEX() several times (there must be no other events
+ * between them). First sysex fragment must have 0xf0 in the first byte
+ * and the last byte (buf[len-1] of the last fragment must be 0xf7. No byte
+ * between these sysex start and end markers cannot be larger than 0x7f. Also
+ * lengths of each fragments (except the last one) must be 6.
+ *
+ * Breaking the above rules may work with some MIDI ports but is likely to
+ * cause fatal problems with some other devices (such as MPU401).
+ */
+#define SEQ_SYSEX(dev, buf, len) \
+					{int ii, ll=(len); \
+					 unsigned char *bufp=buf;\
+					 if (ll>6)ll=6;\
+					_SEQ_NEEDBUF(8);\
+					_seqbuf[_seqbufptr] = EV_SYSEX;\
+					_seqbuf[_seqbufptr+1] = (dev);\
+					for(ii=0;ii<ll;ii++)\
+					   _seqbuf[_seqbufptr+ii+2] = bufp[ii];\
+					for(ii=ll;ii<6;ii++)\
+					   _seqbuf[_seqbufptr+ii+2] = 0xff;\
+					_SEQ_ADVBUF(8);}
+
+#define SEQ_CHN_PRESSURE(dev, chn, pressure) \
+		_CHN_COMMON(dev, MIDI_CHN_PRESSURE, chn, pressure, 0, 0)
+
+#define SEQ_SET_PATCH SEQ_PGM_CHANGE
+#define SEQ_PGM_CHANGE(dev, chn, patch) \
+		_CHN_COMMON(dev, MIDI_PGM_CHANGE, chn, patch, 0, 0)
+
+#define SEQ_CONTROL(dev, chn, controller, value) \
+		_CHN_COMMON(dev, MIDI_CTL_CHANGE, chn, controller, 0, value)
+
+#define SEQ_BENDER(dev, chn, value) \
+		_CHN_COMMON(dev, MIDI_PITCH_BEND, chn, 0, 0, value)
+
+
+#define SEQ_V2_X_CONTROL(dev, voice, controller, value)	{_SEQ_NEEDBUF(8);\
+					_seqbuf[_seqbufptr] = SEQ_EXTENDED;\
+					_seqbuf[_seqbufptr+1] = SEQ_CONTROLLER;\
+					_seqbuf[_seqbufptr+2] = (dev);\
+					_seqbuf[_seqbufptr+3] = (voice);\
+					_seqbuf[_seqbufptr+4] = (controller);\
+					_seqbuf[_seqbufptr+5] = ((value)&0xff);\
+					_seqbuf[_seqbufptr+6] = ((value>>8)&0xff);\
+					_seqbuf[_seqbufptr+7] = 0;\
+					_SEQ_ADVBUF(8);}
+/*
+ * The following 5 macros are incorrectly implemented and obsolete.
+ * Use SEQ_BENDER and SEQ_CONTROL (with proper controller) instead.
+ */
+#define SEQ_PITCHBEND(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER, value)
+#define SEQ_BENDER_RANGE(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER_RANGE, value)
+#define SEQ_EXPRESSION(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_EXPRESSION, value*128)
+#define SEQ_MAIN_VOLUME(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_MAIN_VOLUME, (value*16383)/100)
+#define SEQ_PANNING(dev, voice, pos) SEQ_CONTROL(dev, voice, CTL_PAN, (pos+128) / 2)
+
+/*
+ * Timing and synchronization macros
+ */
+
+#define _TIMER_EVENT(ev, parm)		{_SEQ_NEEDBUF(8);\
+				 	_seqbuf[_seqbufptr+0] = EV_TIMING; \
+				 	_seqbuf[_seqbufptr+1] = (ev); \
+					_seqbuf[_seqbufptr+2] = 0;\
+					_seqbuf[_seqbufptr+3] = 0;\
+				 	*(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \
+					_SEQ_ADVBUF(8);}
+
+#define SEQ_START_TIMER()		_TIMER_EVENT(TMR_START, 0)
+#define SEQ_STOP_TIMER()		_TIMER_EVENT(TMR_STOP, 0)
+#define SEQ_CONTINUE_TIMER()		_TIMER_EVENT(TMR_CONTINUE, 0)
+#define SEQ_WAIT_TIME(ticks)		_TIMER_EVENT(TMR_WAIT_ABS, ticks)
+#define SEQ_DELTA_TIME(ticks)		_TIMER_EVENT(TMR_WAIT_REL, ticks)
+#define SEQ_ECHO_BACK(key)		_TIMER_EVENT(TMR_ECHO, key)
+#define SEQ_SET_TEMPO(value)		_TIMER_EVENT(TMR_TEMPO, value)
+#define SEQ_SONGPOS(pos)		_TIMER_EVENT(TMR_SPP, pos)
+#define SEQ_TIME_SIGNATURE(sig)		_TIMER_EVENT(TMR_TIMESIG, sig)
+
+/*
+ * Local control events
+ */
+
+#define _LOCAL_EVENT(ev, parm)		{_SEQ_NEEDBUF(8);\
+				 	_seqbuf[_seqbufptr+0] = EV_SEQ_LOCAL; \
+				 	_seqbuf[_seqbufptr+1] = (ev); \
+					_seqbuf[_seqbufptr+2] = 0;\
+					_seqbuf[_seqbufptr+3] = 0;\
+				 	*(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \
+					_SEQ_ADVBUF(8);}
+
+#define SEQ_PLAYAUDIO(devmask)		_LOCAL_EVENT(LOCL_STARTAUDIO, devmask)
+/*
+ * Events for the level 1 interface only 
+ */
+
+#define SEQ_MIDIOUT(device, byte)	{_SEQ_NEEDBUF(4);\
+					_seqbuf[_seqbufptr] = SEQ_MIDIPUTC;\
+					_seqbuf[_seqbufptr+1] = (byte);\
+					_seqbuf[_seqbufptr+2] = (device);\
+					_seqbuf[_seqbufptr+3] = 0;\
+					_SEQ_ADVBUF(4);}
+
+/*
+ * Patch loading.
+ */
+#define SEQ_WRPATCH(patchx, len) \
+		{if (_seqbufptr) SEQ_DUMPBUF();\
+		 if (write(seqfd, (char*)(patchx), len)==-1) \
+		    perror("Write patch: /dev/sequencer");}
+#define SEQ_WRPATCH2(patchx, len) \
+		(SEQ_DUMPBUF(), write(seqfd, (char*)(patchx), len))
+
+#endif
+#endif
diff --git a/include/linux/spi/74x164.h b/include/linux/spi/74x164.h
new file mode 100644
index 00000000..0aa6acc7
--- /dev/null
+++ b/include/linux/spi/74x164.h
@@ -0,0 +1,9 @@
+#ifndef LINUX_SPI_74X164_H
+#define LINUX_SPI_74X164_H
+
+struct gen_74x164_chip_platform_data {
+	/* number assigned to the first GPIO */
+	unsigned	base;
+};
+
+#endif
diff --git a/include/linux/spi/Kbuild b/include/linux/spi/Kbuild
new file mode 100644
index 00000000..d375a082
--- /dev/null
+++ b/include/linux/spi/Kbuild
@@ -0,0 +1 @@
+header-y += spidev.h
diff --git a/include/linux/spi/ad7877.h b/include/linux/spi/ad7877.h
new file mode 100644
index 00000000..cdbed816
--- /dev/null
+++ b/include/linux/spi/ad7877.h
@@ -0,0 +1,24 @@
+/* linux/spi/ad7877.h */
+
+/* Touchscreen characteristics vary between boards and models.  The
+ * platform_data for the device's "struct device" holds this information.
+ *
+ * It's OK if the min/max values are zero.
+ */
+struct ad7877_platform_data {
+	u16	model;			/* 7877 */
+	u16	vref_delay_usecs;	/* 0 for external vref; etc */
+	u16	x_plate_ohms;
+	u16	y_plate_ohms;
+
+	u16	x_min, x_max;
+	u16	y_min, y_max;
+	u16	pressure_min, pressure_max;
+
+	u8	stopacq_polarity;	/* 1 = Active HIGH, 0 = Active LOW */
+	u8	first_conversion_delay;	/* 0 = 0.5us, 1 = 128us, 2 = 1ms, 3 = 8ms */
+	u8	acquisition_time;	/* 0 = 2us, 1 = 4us, 2 = 8us, 3 = 16us */
+	u8	averaging;		/* 0 = 1, 1 = 4, 2 = 8, 3 = 16 */
+	u8	pen_down_acc_interval;	/* 0 = covert once, 1 = every 0.5 ms,
+					   2 = ever 1 ms,   3 = every 8 ms,*/
+};
diff --git a/include/linux/spi/ad7879.h b/include/linux/spi/ad7879.h
new file mode 100644
index 00000000..6334cee1
--- /dev/null
+++ b/include/linux/spi/ad7879.h
@@ -0,0 +1,39 @@
+/* linux/spi/ad7879.h */
+
+/* Touchscreen characteristics vary between boards and models.  The
+ * platform_data for the device's "struct device" holds this information.
+ *
+ * It's OK if the min/max values are zero.
+ */
+struct ad7879_platform_data {
+	u16	model;			/* 7879 */
+	u16	x_plate_ohms;
+	u16	x_min, x_max;
+	u16	y_min, y_max;
+	u16	pressure_min, pressure_max;
+
+	/* [0..255] 0=OFF Starts at 1=550us and goes
+	 * all the way to 9.440ms in steps of 35us.
+	 */
+	u8	pen_down_acc_interval;
+	/* [0..15] Starts at 0=128us and goes all the
+	 * way to 4.096ms in steps of 128us.
+	 */
+	u8	first_conversion_delay;
+	/* [0..3] 0 = 2us, 1 = 4us, 2 = 8us, 3 = 16us */
+	u8	acquisition_time;
+	/* [0..3] Average X middle samples 0 = 2, 1 = 4, 2 = 8, 3 = 16 */
+	u8	averaging;
+	/* [0..3] Perform X measurements 0 = OFF,
+	 * 1 = 4, 2 = 8, 3 = 16 (median > averaging)
+	 */
+	u8	median;
+	/* 1 = AUX/VBAT/GPIO export GPIO to gpiolib
+	 * requires CONFIG_GPIOLIB
+	 */
+	bool	gpio_export;
+	/* identifies the first GPIO number handled by this chip;
+	 * or, if negative, requests dynamic ID allocation.
+	 */
+	s32	gpio_base;
+};
diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h
new file mode 100644
index 00000000..c64de9dd
--- /dev/null
+++ b/include/linux/spi/ads7846.h
@@ -0,0 +1,60 @@
+/* linux/spi/ads7846.h */
+
+/* Touchscreen characteristics vary between boards and models.  The
+ * platform_data for the device's "struct device" holds this information.
+ *
+ * It's OK if the min/max values are zero.
+ */
+enum ads7846_filter {
+	ADS7846_FILTER_OK,
+	ADS7846_FILTER_REPEAT,
+	ADS7846_FILTER_IGNORE,
+};
+
+struct ads7846_platform_data {
+	u16	model;			/* 7843, 7845, 7846, 7873. */
+	u16	vref_delay_usecs;	/* 0 for external vref; etc */
+	u16	vref_mv;		/* external vref value, milliVolts
+					 * ads7846: if 0, use internal vref */
+	bool	keep_vref_on;		/* set to keep vref on for differential
+					 * measurements as well */
+	bool	swap_xy;		/* swap x and y axes */
+
+	/* Settling time of the analog signals; a function of Vcc and the
+	 * capacitance on the X/Y drivers.  If set to non-zero, two samples
+	 * are taken with settle_delay us apart, and the second one is used.
+	 * ~150 uSec with 0.01uF caps.
+	 */
+	u16	settle_delay_usecs;
+
+	/* If set to non-zero, after samples are taken this delay is applied
+	 * and penirq is rechecked, to help avoid false events.  This value
+	 * is affected by the material used to build the touch layer.
+	 */
+	u16	penirq_recheck_delay_usecs;
+
+	u16	x_plate_ohms;
+	u16	y_plate_ohms;
+
+	u16	x_min, x_max;
+	u16	y_min, y_max;
+	u16	pressure_min, pressure_max;
+
+	u16	debounce_max;		/* max number of additional readings
+					 * per sample */
+	u16	debounce_tol;		/* tolerance used for filtering */
+	u16	debounce_rep;		/* additional consecutive good readings
+					 * required after the first two */
+	int	gpio_pendown;		/* the GPIO used to decide the pendown
+					 * state if get_pendown_state == NULL
+					 */
+	int	(*get_pendown_state)(void);
+	int	(*filter_init)	(const struct ads7846_platform_data *pdata,
+				 void **filter_data);
+	int	(*filter)	(void *filter_data, int data_idx, int *val);
+	void	(*filter_cleanup)(void *filter_data);
+	void	(*wait_for_sync)(void);
+	bool	wakeup;
+	unsigned long irq_flags;
+};
+
diff --git a/include/linux/spi/at73c213.h b/include/linux/spi/at73c213.h
new file mode 100644
index 00000000..0f20a70e
--- /dev/null
+++ b/include/linux/spi/at73c213.h
@@ -0,0 +1,25 @@
+/*
+ * Board-specific data used to set up AT73c213 audio DAC driver.
+ */
+
+#ifndef __LINUX_SPI_AT73C213_H
+#define __LINUX_SPI_AT73C213_H
+
+/**
+ * at73c213_board_info - how the external DAC is wired to the device.
+ *
+ * @ssc_id: SSC platform_driver id the DAC shall use to stream the audio.
+ * @dac_clk: the external clock used to provide master clock to the DAC.
+ * @shortname: a short discription for the DAC, seen by userspace tools.
+ *
+ * This struct contains the configuration of the hardware connection to the
+ * external DAC. The DAC needs a master clock and a I2S audio stream. It also
+ * provides a name which is used to identify it in userspace tools.
+ */
+struct at73c213_board_info {
+	int		ssc_id;
+	struct clk	*dac_clk;
+	char		shortname[32];
+};
+
+#endif /* __LINUX_SPI_AT73C213_H */
diff --git a/include/linux/spi/corgi_lcd.h b/include/linux/spi/corgi_lcd.h
new file mode 100644
index 00000000..6692b341
--- /dev/null
+++ b/include/linux/spi/corgi_lcd.h
@@ -0,0 +1,20 @@
+#ifndef __LINUX_SPI_CORGI_LCD_H
+#define __LINUX_SPI_CORGI_LCD_H
+
+#define CORGI_LCD_MODE_QVGA	1
+#define CORGI_LCD_MODE_VGA	2
+
+struct corgi_lcd_platform_data {
+	int	init_mode;
+	int	max_intensity;
+	int	default_intensity;
+	int	limit_mask;
+
+	int	gpio_backlight_on;	/* -1 if n/a */
+	int	gpio_backlight_cont;	/* -1 if n/a */
+
+	void (*notify)(int intensity);
+	void (*kick_battery)(void);
+};
+
+#endif /* __LINUX_SPI_CORGI_LCD_H */
diff --git a/include/linux/spi/ds1305.h b/include/linux/spi/ds1305.h
new file mode 100644
index 00000000..287ec830
--- /dev/null
+++ b/include/linux/spi/ds1305.h
@@ -0,0 +1,35 @@
+#ifndef __LINUX_SPI_DS1305_H
+#define __LINUX_SPI_DS1305_H
+
+/*
+ * One-time configuration for ds1305 and ds1306 RTC chips.
+ *
+ * Put a pointer to this in spi_board_info.platform_data if you want to
+ * be sure that Linux (re)initializes this as needed ... after losing
+ * backup power, and potentially on the first boot.
+ */
+struct ds1305_platform_data {
+
+	/* Trickle charge configuration:  it's OK to leave out the MAGIC
+	 * bitmask; mask in either DS1 or DS2, and then one of 2K/4k/8K.
+	 */
+#define DS1305_TRICKLE_MAGIC	0xa0
+#define DS1305_TRICKLE_DS2	0x08	/* two diodes */
+#define DS1305_TRICKLE_DS1	0x04	/* one diode */
+#define DS1305_TRICKLE_2K	0x01	/* 2 KOhm resistance */
+#define DS1305_TRICKLE_4K	0x02	/* 4 KOhm resistance */
+#define DS1305_TRICKLE_8K	0x03	/* 8 KOhm resistance */
+	u8	trickle;
+
+	/* set only on ds1306 parts */
+	bool	is_ds1306;
+
+	/* ds1306 only:  enable 1 Hz output */
+	bool	en_1hz;
+
+	/* REVISIT:  the driver currently expects nINT0 to be wired
+	 * as the alarm IRQ.  ALM1 may also need to be set up ...
+	 */
+};
+
+#endif /* __LINUX_SPI_DS1305_H */
diff --git a/include/linux/spi/eeprom.h b/include/linux/spi/eeprom.h
new file mode 100644
index 00000000..306e7b1c
--- /dev/null
+++ b/include/linux/spi/eeprom.h
@@ -0,0 +1,28 @@
+#ifndef __LINUX_SPI_EEPROM_H
+#define __LINUX_SPI_EEPROM_H
+
+#include <linux/memory.h>
+
+/*
+ * Put one of these structures in platform_data for SPI EEPROMS handled
+ * by the "at25" driver.  On SPI, most EEPROMS understand the same core
+ * command set.  If you need to support EEPROMs that don't yet fit, add
+ * flags to support those protocol options.  These values all come from
+ * the chip datasheets.
+ */
+struct spi_eeprom {
+	u32		byte_len;
+	char		name[10];
+	u16		page_size;		/* for writes */
+	u16		flags;
+#define	EE_ADDR1	0x0001			/*  8 bit addrs */
+#define	EE_ADDR2	0x0002			/* 16 bit addrs */
+#define	EE_ADDR3	0x0004			/* 24 bit addrs */
+#define	EE_READONLY	0x0008			/* disallow writes */
+
+	/* for exporting this chip's data to other kernel code */
+	void (*setup)(struct memory_accessor *mem, void *context);
+	void *context;
+};
+
+#endif /* __LINUX_SPI_EEPROM_H */
diff --git a/include/linux/spi/flash.h b/include/linux/spi/flash.h
new file mode 100644
index 00000000..3f22932e
--- /dev/null
+++ b/include/linux/spi/flash.h
@@ -0,0 +1,31 @@
+#ifndef LINUX_SPI_FLASH_H
+#define LINUX_SPI_FLASH_H
+
+struct mtd_partition;
+
+/**
+ * struct flash_platform_data: board-specific flash data
+ * @name: optional flash device name (eg, as used with mtdparts=)
+ * @parts: optional array of mtd_partitions for static partitioning
+ * @nr_parts: number of mtd_partitions for static partitoning
+ * @type: optional flash device type (e.g. m25p80 vs m25p64), for use
+ *	with chips that can't be queried for JEDEC or other IDs
+ *
+ * Board init code (in arch/.../mach-xxx/board-yyy.c files) can
+ * provide information about SPI flash parts (such as DataFlash) to
+ * help set up the device and its appropriate default partitioning.
+ *
+ * Note that for DataFlash, sizes for pages, blocks, and sectors are
+ * rarely powers of two; and partitions should be sector-aligned.
+ */
+struct flash_platform_data {
+	char		*name;
+	struct mtd_partition *parts;
+	unsigned int	nr_parts;
+
+	char		*type;
+
+	/* we'll likely add more ... use JEDEC IDs, etc */
+};
+
+#endif
diff --git a/include/linux/spi/ifx_modem.h b/include/linux/spi/ifx_modem.h
new file mode 100644
index 00000000..394fec9e
--- /dev/null
+++ b/include/linux/spi/ifx_modem.h
@@ -0,0 +1,19 @@
+#ifndef LINUX_IFX_MODEM_H
+#define LINUX_IFX_MODEM_H
+
+struct ifx_modem_platform_data {
+	unsigned short rst_out;		/* modem reset out */
+	unsigned short pwr_on;		/* power on */
+	unsigned short rst_pmu;		/* reset modem */
+	unsigned short tx_pwr;		/* modem power threshold */
+	unsigned short srdy;		/* SRDY */
+	unsigned short mrdy;		/* MRDY */
+	unsigned char modem_type;	/* Modem type */
+	unsigned long max_hz;		/* max SPI frequency */
+	unsigned short use_dma:1;	/* spi protocol driver supplies
+					   dma-able addrs */
+};
+#define IFX_MODEM_6160	1
+#define IFX_MODEM_6260	2
+
+#endif
diff --git a/include/linux/spi/l4f00242t03.h b/include/linux/spi/l4f00242t03.h
new file mode 100644
index 00000000..bc8677c8
--- /dev/null
+++ b/include/linux/spi/l4f00242t03.h
@@ -0,0 +1,29 @@
+/*
+ * l4f00242t03.h -- Platform glue for Epson L4F00242T03 LCD
+ *
+ * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ * Based on Marek Vasut work in lms283gf05.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#ifndef _INCLUDE_LINUX_SPI_L4F00242T03_H_
+#define _INCLUDE_LINUX_SPI_L4F00242T03_H_
+
+struct l4f00242t03_pdata {
+	unsigned int	reset_gpio;
+	unsigned int	data_enable_gpio;
+};
+
+#endif /* _INCLUDE_LINUX_SPI_L4F00242T03_H_ */
diff --git a/include/linux/spi/libertas_spi.h b/include/linux/spi/libertas_spi.h
new file mode 100644
index 00000000..1b5d5384
--- /dev/null
+++ b/include/linux/spi/libertas_spi.h
@@ -0,0 +1,29 @@
+/*
+ * board-specific data for the libertas_spi driver.
+ *
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#ifndef _LIBERTAS_SPI_H_
+#define _LIBERTAS_SPI_H_
+
+struct spi_device;
+
+struct libertas_spi_platform_data {
+	/* There are two ways to read data from the WLAN module's SPI
+	 * interface. Setting 0 or 1 here controls which one is used.
+	 *
+	 * Usually you want to set use_dummy_writes = 1.
+	 * However, if that doesn't work or if you are using a slow SPI clock
+	 * speed, you may want to use 0 here. */
+	u16 use_dummy_writes;
+
+	/* Board specific setup/teardown */
+	int (*setup)(struct spi_device *spi);
+	int (*teardown)(struct spi_device *spi);
+};
+#endif
diff --git a/include/linux/spi/lms283gf05.h b/include/linux/spi/lms283gf05.h
new file mode 100644
index 00000000..555d254e
--- /dev/null
+++ b/include/linux/spi/lms283gf05.h
@@ -0,0 +1,28 @@
+/*
+ * lms283gf05.h - Platform glue for Samsung LMS283GF05 LCD
+ *
+ * Copyright (C) 2009 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#ifndef _INCLUDE_LINUX_SPI_LMS283GF05_H_
+#define _INCLUDE_LINUX_SPI_LMS283GF05_H_
+
+struct lms283gf05_pdata {
+	unsigned long	reset_gpio;
+	bool		reset_inverted;
+};
+
+#endif /* _INCLUDE_LINUX_SPI_LMS283GF05_H_ */
diff --git a/include/linux/spi/max7301.h b/include/linux/spi/max7301.h
new file mode 100644
index 00000000..bcaa2f76
--- /dev/null
+++ b/include/linux/spi/max7301.h
@@ -0,0 +1,35 @@
+#ifndef LINUX_SPI_MAX7301_H
+#define LINUX_SPI_MAX7301_H
+
+#include <linux/gpio.h>
+
+/*
+ * Some registers must be read back to modify.
+ * To save time we cache them here in memory
+ */
+struct max7301 {
+	struct mutex	lock;
+	u8		port_config[8];	/* field 0 is unused */
+	u32		out_level;	/* cached output levels */
+	u32		input_pullup_active;
+	struct gpio_chip chip;
+	struct device *dev;
+	int (*write)(struct device *dev, unsigned int reg, unsigned int val);
+	int (*read)(struct device *dev, unsigned int reg);
+};
+
+struct max7301_platform_data {
+	/* number assigned to the first GPIO */
+	unsigned	base;
+	/*
+	 * bitmask controlling the pullup configuration,
+	 *
+	 * _note_ the 4 lowest bits are unused, because the first 4
+	 * ports of the controller are not used, too.
+	 */
+	u32		input_pullup_active;
+};
+
+extern int __max730x_remove(struct device *dev);
+extern int __max730x_probe(struct max7301 *ts);
+#endif
diff --git a/include/linux/spi/mc33880.h b/include/linux/spi/mc33880.h
new file mode 100644
index 00000000..82ffccd6
--- /dev/null
+++ b/include/linux/spi/mc33880.h
@@ -0,0 +1,10 @@
+#ifndef LINUX_SPI_MC33880_H
+#define LINUX_SPI_MC33880_H
+
+struct mc33880_platform_data {
+	/* number assigned to the first GPIO */
+	unsigned	base;
+};
+
+#endif
+
diff --git a/include/linux/spi/mcp23s08.h b/include/linux/spi/mcp23s08.h
new file mode 100644
index 00000000..2d676d5a
--- /dev/null
+++ b/include/linux/spi/mcp23s08.h
@@ -0,0 +1,25 @@
+
+/* FIXME driver should be able to handle IRQs...  */
+
+struct mcp23s08_chip_info {
+	bool		is_present;	/* true if populated */
+	unsigned	pullups;	/* BIT(x) means enable pullup x */
+};
+
+struct mcp23s08_platform_data {
+	/* For mcp23s08, up to 4 slaves (numbered 0..3) can share one SPI
+	 * chipselect, each providing 1 gpio_chip instance with 8 gpios.
+	 * For mpc23s17, up to 8 slaves (numbered 0..7) can share one SPI
+	 * chipselect, each providing 1 gpio_chip (port A + port B) with
+	 * 16 gpios.
+	 */
+	struct mcp23s08_chip_info	chip[8];
+
+	/* "base" is the number of the first GPIO.  Dynamic assignment is
+	 * not currently supported, and even if there are gaps in chip
+	 * addressing the GPIO numbers are sequential .. so for example
+	 * if only slaves 0 and 3 are present, their GPIOs range from
+	 * base to base+15 (or base+31 for s17 variant).
+	 */
+	unsigned	base;
+};
diff --git a/include/linux/spi/mmc_spi.h b/include/linux/spi/mmc_spi.h
new file mode 100644
index 00000000..32be8dbd
--- /dev/null
+++ b/include/linux/spi/mmc_spi.h
@@ -0,0 +1,57 @@
+#ifndef __LINUX_SPI_MMC_SPI_H
+#define __LINUX_SPI_MMC_SPI_H
+
+#include <linux/spi/spi.h>
+#include <linux/interrupt.h>
+
+struct device;
+struct mmc_host;
+
+/* Put this in platform_data of a device being used to manage an MMC/SD
+ * card slot.  (Modeled after PXA mmc glue; see that for usage examples.)
+ *
+ * REVISIT This is not a spi-specific notion.  Any card slot should be
+ * able to handle it.  If the MMC core doesn't adopt this kind of notion,
+ * switch the "struct device *" parameters over to "struct spi_device *".
+ */
+struct mmc_spi_platform_data {
+	/* driver activation and (optional) card detect irq hookup */
+	int (*init)(struct device *,
+		irqreturn_t (*)(int, void *),
+		void *);
+	void (*exit)(struct device *, void *);
+
+	/* sense switch on sd cards */
+	int (*get_ro)(struct device *);
+
+	/*
+	 * If board does not use CD interrupts, driver can optimize polling
+	 * using this function.
+	 */
+	int (*get_cd)(struct device *);
+
+	/* Capabilities to pass into mmc core (e.g. MMC_CAP_NEEDS_POLL). */
+	unsigned long caps;
+
+	/* how long to debounce card detect, in msecs */
+	u16 detect_delay;
+
+	/* power management */
+	u16 powerup_msecs;		/* delay of up to 250 msec */
+	u32 ocr_mask;			/* available voltages */
+	void (*setpower)(struct device *, unsigned int maskval);
+};
+
+#ifdef CONFIG_OF
+extern struct mmc_spi_platform_data *mmc_spi_get_pdata(struct spi_device *spi);
+extern void mmc_spi_put_pdata(struct spi_device *spi);
+#else
+static inline struct mmc_spi_platform_data *
+mmc_spi_get_pdata(struct spi_device *spi)
+{
+	return spi->dev.platform_data;
+}
+static inline void mmc_spi_put_pdata(struct spi_device *spi) {}
+#endif /* CONFIG_OF */
+
+#endif /* __LINUX_SPI_MMC_SPI_H */
diff --git a/include/linux/spi/orion_spi.h b/include/linux/spi/orion_spi.h
new file mode 100644
index 00000000..b4d9fa6f
--- /dev/null
+++ b/include/linux/spi/orion_spi.h
@@ -0,0 +1,17 @@
+/*
+ * orion_spi.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __LINUX_SPI_ORION_SPI_H
+#define __LINUX_SPI_ORION_SPI_H
+
+struct orion_spi_info {
+	u32	tclk;		/* no <linux/clk.h> support yet */
+};
+
+
+#endif
diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h
new file mode 100644
index 00000000..d3e1075f
--- /dev/null
+++ b/include/linux/spi/pxa2xx_spi.h
@@ -0,0 +1,152 @@
+/*
+ * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __linux_pxa2xx_spi_h
+#define __linux_pxa2xx_spi_h
+
+#include <linux/pxa2xx_ssp.h>
+
+#define PXA2XX_CS_ASSERT (0x01)
+#define PXA2XX_CS_DEASSERT (0x02)
+
+/* device.platform_data for SSP controller devices */
+struct pxa2xx_spi_master {
+	u32 clock_enable;
+	u16 num_chipselect;
+	u8 enable_dma;
+};
+
+/* spi_board_info.controller_data for SPI slave devices,
+ * copied to spi_device.platform_data ... mostly for dma tuning
+ */
+struct pxa2xx_spi_chip {
+	u8 tx_threshold;
+	u8 rx_threshold;
+	u8 dma_burst_size;
+	u32 timeout;
+	u8 enable_loopback;
+	int gpio_cs;
+	void (*cs_control)(u32 command);
+};
+
+#ifdef CONFIG_ARCH_PXA
+
+#include <linux/clk.h>
+#include <mach/dma.h>
+
+extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info);
+
+#else
+/*
+ * This is the implemtation for CE4100 on x86. ARM defines them in mach/ or
+ * plat/ include path.
+ * The CE4100 does not provide DMA support. This bits are here to let the driver
+ * compile and will never be used. Maybe we get DMA support at a later point in
+ * time.
+ */
+
+#define DCSR(n)         (n)
+#define DSADR(n)        (n)
+#define DTADR(n)        (n)
+#define DCMD(n)         (n)
+#define DRCMR(n)        (n)
+
+#define DCSR_RUN	(1 << 31)	/* Run Bit */
+#define DCSR_NODESC	(1 << 30)	/* No-Descriptor Fetch */
+#define DCSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable */
+#define DCSR_REQPEND	(1 << 8)	/* Request Pending (read-only) */
+#define DCSR_STOPSTATE	(1 << 3)	/* Stop State (read-only) */
+#define DCSR_ENDINTR	(1 << 2)	/* End Interrupt */
+#define DCSR_STARTINTR	(1 << 1)	/* Start Interrupt */
+#define DCSR_BUSERR	(1 << 0)	/* Bus Error Interrupt */
+
+#define DCSR_EORIRQEN	(1 << 28)	/* End of Receive Interrupt Enable */
+#define DCSR_EORJMPEN	(1 << 27)	/* Jump to next descriptor on EOR */
+#define DCSR_EORSTOPEN	(1 << 26)	/* STOP on an EOR */
+#define DCSR_SETCMPST	(1 << 25)	/* Set Descriptor Compare Status */
+#define DCSR_CLRCMPST	(1 << 24)	/* Clear Descriptor Compare Status */
+#define DCSR_CMPST	(1 << 10)	/* The Descriptor Compare Status */
+#define DCSR_EORINTR	(1 << 9)	/* The end of Receive */
+
+#define DRCMR_MAPVLD	(1 << 7)	/* Map Valid */
+#define DRCMR_CHLNUM	0x1f		/* mask for Channel Number */
+
+#define DDADR_DESCADDR	0xfffffff0	/* Address of next descriptor */
+#define DDADR_STOP	(1 << 0)	/* Stop */
+
+#define DCMD_INCSRCADDR	(1 << 31)	/* Source Address Increment Setting. */
+#define DCMD_INCTRGADDR	(1 << 30)	/* Target Address Increment Setting. */
+#define DCMD_FLOWSRC	(1 << 29)	/* Flow Control by the source. */
+#define DCMD_FLOWTRG	(1 << 28)	/* Flow Control by the target. */
+#define DCMD_STARTIRQEN	(1 << 22)	/* Start Interrupt Enable */
+#define DCMD_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
+#define DCMD_ENDIAN	(1 << 18)	/* Device Endian-ness. */
+#define DCMD_BURST8	(1 << 16)	/* 8 byte burst */
+#define DCMD_BURST16	(2 << 16)	/* 16 byte burst */
+#define DCMD_BURST32	(3 << 16)	/* 32 byte burst */
+#define DCMD_WIDTH1	(1 << 14)	/* 1 byte width */
+#define DCMD_WIDTH2	(2 << 14)	/* 2 byte width (HalfWord) */
+#define DCMD_WIDTH4	(3 << 14)	/* 4 byte width (Word) */
+#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
+
+/*
+ * Descriptor structure for PXA's DMA engine
+ * Note: this structure must always be aligned to a 16-byte boundary.
+ */
+
+typedef enum {
+	DMA_PRIO_HIGH = 0,
+	DMA_PRIO_MEDIUM = 1,
+	DMA_PRIO_LOW = 2
+} pxa_dma_prio;
+
+/*
+ * DMA registration
+ */
+
+static inline int pxa_request_dma(char *name,
+		pxa_dma_prio prio,
+		void (*irq_handler)(int, void *),
+		void *data)
+{
+	return -ENODEV;
+}
+
+static inline void pxa_free_dma(int dma_ch)
+{
+}
+
+/*
+ * The CE4100 does not have the clk framework implemented and SPI clock can
+ * not be switched on/off or the divider changed.
+ */
+static inline void clk_disable(struct clk *clk)
+{
+}
+
+static inline int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+
+static inline unsigned long clk_get_rate(struct clk *clk)
+{
+	return 3686400;
+}
+
+#endif
+#endif
diff --git a/include/linux/spi/s3c24xx.h b/include/linux/spi/s3c24xx.h
new file mode 100644
index 00000000..c23b923e
--- /dev/null
+++ b/include/linux/spi/s3c24xx.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - SPI Controller platform_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __LINUX_SPI_S3C24XX_H
+#define __LINUX_SPI_S3C24XX_H __FILE__
+
+struct s3c2410_spi_info {
+	int			 pin_cs;	/* simple gpio cs */
+	unsigned int		 num_cs;	/* total chipselects */
+	int			 bus_num;       /* bus number to use. */
+
+	unsigned int		 use_fiq:1;	/* use fiq */
+
+	void (*gpio_setup)(struct s3c2410_spi_info *spi, int enable);
+	void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
+};
+
+#endif /* __LINUX_SPI_S3C24XX_H */
diff --git a/include/linux/spi/sh_hspi.h b/include/linux/spi/sh_hspi.h
new file mode 100644
index 00000000..a1121f87
--- /dev/null
+++ b/include/linux/spi/sh_hspi.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2011 Kuninori Morimoto
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#ifndef SH_HSPI_H
+#define SH_HSPI_H
+
+struct sh_hspi_info {
+};
+
+#endif
diff --git a/include/linux/spi/sh_msiof.h b/include/linux/spi/sh_msiof.h
new file mode 100644
index 00000000..2e8db3d2
--- /dev/null
+++ b/include/linux/spi/sh_msiof.h
@@ -0,0 +1,10 @@
+#ifndef __SPI_SH_MSIOF_H__
+#define __SPI_SH_MSIOF_H__
+
+struct sh_msiof_spi_info {
+	int tx_fifo_override;
+	int rx_fifo_override;
+	u16 num_chipselect;
+};
+
+#endif /* __SPI_SH_MSIOF_H__ */
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
new file mode 100644
index 00000000..fa702aeb
--- /dev/null
+++ b/include/linux/spi/spi.h
@@ -0,0 +1,859 @@
+/*
+ * Copyright (C) 2005 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_SPI_H
+#define __LINUX_SPI_H
+
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/slab.h>
+#include <linux/kthread.h>
+
+/*
+ * INTERFACES between SPI master-side drivers and SPI infrastructure.
+ * (There's no SPI slave support for Linux yet...)
+ */
+extern struct bus_type spi_bus_type;
+
+/**
+ * struct spi_device - Master side proxy for an SPI slave device
+ * @dev: Driver model representation of the device.
+ * @master: SPI controller used with the device.
+ * @max_speed_hz: Maximum clock rate to be used with this chip
+ *	(on this board); may be changed by the device's driver.
+ *	The spi_transfer.speed_hz can override this for each transfer.
+ * @chip_select: Chipselect, distinguishing chips handled by @master.
+ * @mode: The spi mode defines how data is clocked out and in.
+ *	This may be changed by the device's driver.
+ *	The "active low" default for chipselect mode can be overridden
+ *	(by specifying SPI_CS_HIGH) as can the "MSB first" default for
+ *	each word in a transfer (by specifying SPI_LSB_FIRST).
+ * @bits_per_word: Data transfers involve one or more words; word sizes
+ *	like eight or 12 bits are common.  In-memory wordsizes are
+ *	powers of two bytes (e.g. 20 bit samples use 32 bits).
+ *	This may be changed by the device's driver, or left at the
+ *	default (0) indicating protocol words are eight bit bytes.
+ *	The spi_transfer.bits_per_word can override this for each transfer.
+ * @irq: Negative, or the number passed to request_irq() to receive
+ *	interrupts from this device.
+ * @controller_state: Controller's runtime state
+ * @controller_data: Board-specific definitions for controller, such as
+ *	FIFO initialization parameters; from board_info.controller_data
+ * @modalias: Name of the driver to use with this device, or an alias
+ *	for that name.  This appears in the sysfs "modalias" attribute
+ *	for driver coldplugging, and in uevents used for hotplugging
+ *
+ * A @spi_device is used to interchange data between an SPI slave
+ * (usually a discrete chip) and CPU memory.
+ *
+ * In @dev, the platform_data is used to hold information about this
+ * device that's meaningful to the device's protocol driver, but not
+ * to its controller.  One example might be an identifier for a chip
+ * variant with slightly different functionality; another might be
+ * information about how this particular board wires the chip's pins.
+ */
+struct spi_device {
+	struct device		dev;
+	struct spi_master	*master;
+	u32			max_speed_hz;
+	u8			chip_select;
+	u8			mode;
+#define	SPI_CPHA	0x01			/* clock phase */
+#define	SPI_CPOL	0x02			/* clock polarity */
+#define	SPI_MODE_0	(0|0)			/* (original MicroWire) */
+#define	SPI_MODE_1	(0|SPI_CPHA)
+#define	SPI_MODE_2	(SPI_CPOL|0)
+#define	SPI_MODE_3	(SPI_CPOL|SPI_CPHA)
+#define	SPI_CS_HIGH	0x04			/* chipselect active high? */
+#define	SPI_LSB_FIRST	0x08			/* per-word bits-on-wire */
+#define	SPI_3WIRE	0x10			/* SI/SO signals shared */
+#define	SPI_LOOP	0x20			/* loopback mode */
+#define	SPI_NO_CS	0x40			/* 1 dev/bus, no chipselect */
+#define	SPI_READY	0x80			/* slave pulls low to pause */
+	u8			bits_per_word;
+	int			irq;
+	void			*controller_state;
+	void			*controller_data;
+	char			modalias[SPI_NAME_SIZE];
+
+	/*
+	 * likely need more hooks for more protocol options affecting how
+	 * the controller talks to each chip, like:
+	 *  - memory packing (12 bit samples into low bits, others zeroed)
+	 *  - priority
+	 *  - drop chipselect after each word
+	 *  - chipselect delays
+	 *  - ...
+	 */
+};
+
+static inline struct spi_device *to_spi_device(struct device *dev)
+{
+	return dev ? container_of(dev, struct spi_device, dev) : NULL;
+}
+
+/* most drivers won't need to care about device refcounting */
+static inline struct spi_device *spi_dev_get(struct spi_device *spi)
+{
+	return (spi && get_device(&spi->dev)) ? spi : NULL;
+}
+
+static inline void spi_dev_put(struct spi_device *spi)
+{
+	if (spi)
+		put_device(&spi->dev);
+}
+
+/* ctldata is for the bus_master driver's runtime state */
+static inline void *spi_get_ctldata(struct spi_device *spi)
+{
+	return spi->controller_state;
+}
+
+static inline void spi_set_ctldata(struct spi_device *spi, void *state)
+{
+	spi->controller_state = state;
+}
+
+/* device driver data */
+
+static inline void spi_set_drvdata(struct spi_device *spi, void *data)
+{
+	dev_set_drvdata(&spi->dev, data);
+}
+
+static inline void *spi_get_drvdata(struct spi_device *spi)
+{
+	return dev_get_drvdata(&spi->dev);
+}
+
+struct spi_message;
+
+
+
+/**
+ * struct spi_driver - Host side "protocol" driver
+ * @id_table: List of SPI devices supported by this driver
+ * @probe: Binds this driver to the spi device.  Drivers can verify
+ *	that the device is actually present, and may need to configure
+ *	characteristics (such as bits_per_word) which weren't needed for
+ *	the initial configuration done during system setup.
+ * @remove: Unbinds this driver from the spi device
+ * @shutdown: Standard shutdown callback used during system state
+ *	transitions such as powerdown/halt and kexec
+ * @suspend: Standard suspend callback used during system state transitions
+ * @resume: Standard resume callback used during system state transitions
+ * @driver: SPI device drivers should initialize the name and owner
+ *	field of this structure.
+ *
+ * This represents the kind of device driver that uses SPI messages to
+ * interact with the hardware at the other end of a SPI link.  It's called
+ * a "protocol" driver because it works through messages rather than talking
+ * directly to SPI hardware (which is what the underlying SPI controller
+ * driver does to pass those messages).  These protocols are defined in the
+ * specification for the device(s) supported by the driver.
+ *
+ * As a rule, those device protocols represent the lowest level interface
+ * supported by a driver, and it will support upper level interfaces too.
+ * Examples of such upper levels include frameworks like MTD, networking,
+ * MMC, RTC, filesystem character device nodes, and hardware monitoring.
+ */
+struct spi_driver {
+	const struct spi_device_id *id_table;
+	int			(*probe)(struct spi_device *spi);
+	int			(*remove)(struct spi_device *spi);
+	void			(*shutdown)(struct spi_device *spi);
+	int			(*suspend)(struct spi_device *spi, pm_message_t mesg);
+	int			(*resume)(struct spi_device *spi);
+	struct device_driver	driver;
+};
+
+static inline struct spi_driver *to_spi_driver(struct device_driver *drv)
+{
+	return drv ? container_of(drv, struct spi_driver, driver) : NULL;
+}
+
+extern int spi_register_driver(struct spi_driver *sdrv);
+
+/**
+ * spi_unregister_driver - reverse effect of spi_register_driver
+ * @sdrv: the driver to unregister
+ * Context: can sleep
+ */
+static inline void spi_unregister_driver(struct spi_driver *sdrv)
+{
+	if (sdrv)
+		driver_unregister(&sdrv->driver);
+}
+
+/**
+ * module_spi_driver() - Helper macro for registering a SPI driver
+ * @__spi_driver: spi_driver struct
+ *
+ * Helper macro for SPI drivers which do not do anything special in module
+ * init/exit. This eliminates a lot of boilerplate. Each module may only
+ * use this macro once, and calling it replaces module_init() and module_exit()
+ */
+#define module_spi_driver(__spi_driver) \
+	module_driver(__spi_driver, spi_register_driver, \
+			spi_unregister_driver)
+
+/**
+ * struct spi_master - interface to SPI master controller
+ * @dev: device interface to this driver
+ * @list: link with the global spi_master list
+ * @bus_num: board-specific (and often SOC-specific) identifier for a
+ *	given SPI controller.
+ * @num_chipselect: chipselects are used to distinguish individual
+ *	SPI slaves, and are numbered from zero to num_chipselects.
+ *	each slave has a chipselect signal, but it's common that not
+ *	every chipselect is connected to a slave.
+ * @dma_alignment: SPI controller constraint on DMA buffers alignment.
+ * @mode_bits: flags understood by this controller driver
+ * @flags: other constraints relevant to this driver
+ * @bus_lock_spinlock: spinlock for SPI bus locking
+ * @bus_lock_mutex: mutex for SPI bus locking
+ * @bus_lock_flag: indicates that the SPI bus is locked for exclusive use
+ * @setup: updates the device mode and clocking records used by a
+ *	device's SPI controller; protocol code may call this.  This
+ *	must fail if an unrecognized or unsupported mode is requested.
+ *	It's always safe to call this unless transfers are pending on
+ *	the device whose settings are being modified.
+ * @transfer: adds a message to the controller's transfer queue.
+ * @cleanup: frees controller-specific state
+ * @queued: whether this master is providing an internal message queue
+ * @kworker: thread struct for message pump
+ * @kworker_task: pointer to task for message pump kworker thread
+ * @pump_messages: work struct for scheduling work to the message pump
+ * @queue_lock: spinlock to syncronise access to message queue
+ * @queue: message queue
+ * @cur_msg: the currently in-flight message
+ * @busy: message pump is busy
+ * @running: message pump is running
+ * @rt: whether this queue is set to run as a realtime task
+ * @prepare_transfer_hardware: a message will soon arrive from the queue
+ *	so the subsystem requests the driver to prepare the transfer hardware
+ *	by issuing this call
+ * @transfer_one_message: the subsystem calls the driver to transfer a single
+ *	message while queuing transfers that arrive in the meantime. When the
+ *	driver is finished with this message, it must call
+ *	spi_finalize_current_message() so the subsystem can issue the next
+ *	transfer
+ * @unprepare_transfer_hardware: there are currently no more messages on the
+ *	queue so the subsystem notifies the driver that it may relax the
+ *	hardware by issuing this call
+ *
+ * Each SPI master controller can communicate with one or more @spi_device
+ * children.  These make a small bus, sharing MOSI, MISO and SCK signals
+ * but not chip select signals.  Each device may be configured to use a
+ * different clock rate, since those shared signals are ignored unless
+ * the chip is selected.
+ *
+ * The driver for an SPI controller manages access to those devices through
+ * a queue of spi_message transactions, copying data between CPU memory and
+ * an SPI slave device.  For each such message it queues, it calls the
+ * message's completion function when the transaction completes.
+ */
+struct spi_master {
+	struct device	dev;
+
+	struct list_head list;
+
+	/* other than negative (== assign one dynamically), bus_num is fully
+	 * board-specific.  usually that simplifies to being SOC-specific.
+	 * example:  one SOC has three SPI controllers, numbered 0..2,
+	 * and one board's schematics might show it using SPI-2.  software
+	 * would normally use bus_num=2 for that controller.
+	 */
+	s16			bus_num;
+
+	/* chipselects will be integral to many controllers; some others
+	 * might use board-specific GPIOs.
+	 */
+	u16			num_chipselect;
+
+	/* some SPI controllers pose alignment requirements on DMAable
+	 * buffers; let protocol drivers know about these requirements.
+	 */
+	u16			dma_alignment;
+
+	/* spi_device.mode flags understood by this controller driver */
+	u16			mode_bits;
+
+	/* other constraints relevant to this driver */
+	u16			flags;
+#define SPI_MASTER_HALF_DUPLEX	BIT(0)		/* can't do full duplex */
+#define SPI_MASTER_NO_RX	BIT(1)		/* can't do buffer read */
+#define SPI_MASTER_NO_TX	BIT(2)		/* can't do buffer write */
+
+	/* lock and mutex for SPI bus locking */
+	spinlock_t		bus_lock_spinlock;
+	struct mutex		bus_lock_mutex;
+
+	/* flag indicating that the SPI bus is locked for exclusive use */
+	bool			bus_lock_flag;
+
+	/* Setup mode and clock, etc (spi driver may call many times).
+	 *
+	 * IMPORTANT:  this may be called when transfers to another
+	 * device are active.  DO NOT UPDATE SHARED REGISTERS in ways
+	 * which could break those transfers.
+	 */
+	int			(*setup)(struct spi_device *spi);
+
+	/* bidirectional bulk transfers
+	 *
+	 * + The transfer() method may not sleep; its main role is
+	 *   just to add the message to the queue.
+	 * + For now there's no remove-from-queue operation, or
+	 *   any other request management
+	 * + To a given spi_device, message queueing is pure fifo
+	 *
+	 * + The master's main job is to process its message queue,
+	 *   selecting a chip then transferring data
+	 * + If there are multiple spi_device children, the i/o queue
+	 *   arbitration algorithm is unspecified (round robin, fifo,
+	 *   priority, reservations, preemption, etc)
+	 *
+	 * + Chipselect stays active during the entire message
+	 *   (unless modified by spi_transfer.cs_change != 0).
+	 * + The message transfers use clock and SPI mode parameters
+	 *   previously established by setup() for this device
+	 */
+	int			(*transfer)(struct spi_device *spi,
+						struct spi_message *mesg);
+
+	/* called on release() to free memory provided by spi_master */
+	void			(*cleanup)(struct spi_device *spi);
+
+	/*
+	 * These hooks are for drivers that want to use the generic
+	 * master transfer queueing mechanism. If these are used, the
+	 * transfer() function above must NOT be specified by the driver.
+	 * Over time we expect SPI drivers to be phased over to this API.
+	 */
+	bool				queued;
+	struct kthread_worker		kworker;
+	struct task_struct		*kworker_task;
+	struct kthread_work		pump_messages;
+	spinlock_t			queue_lock;
+	struct list_head		queue;
+	struct spi_message		*cur_msg;
+	bool				busy;
+	bool				running;
+	bool				rt;
+
+	int (*prepare_transfer_hardware)(struct spi_master *master);
+	int (*transfer_one_message)(struct spi_master *master,
+				    struct spi_message *mesg);
+	int (*unprepare_transfer_hardware)(struct spi_master *master);
+};
+
+static inline void *spi_master_get_devdata(struct spi_master *master)
+{
+	return dev_get_drvdata(&master->dev);
+}
+
+static inline void spi_master_set_devdata(struct spi_master *master, void *data)
+{
+	dev_set_drvdata(&master->dev, data);
+}
+
+static inline struct spi_master *spi_master_get(struct spi_master *master)
+{
+	if (!master || !get_device(&master->dev))
+		return NULL;
+	return master;
+}
+
+static inline void spi_master_put(struct spi_master *master)
+{
+	if (master)
+		put_device(&master->dev);
+}
+
+/* PM calls that need to be issued by the driver */
+extern int spi_master_suspend(struct spi_master *master);
+extern int spi_master_resume(struct spi_master *master);
+
+/* Calls the driver make to interact with the message queue */
+extern struct spi_message *spi_get_next_queued_message(struct spi_master *master);
+extern void spi_finalize_current_message(struct spi_master *master);
+
+/* the spi driver core manages memory for the spi_master classdev */
+extern struct spi_master *
+spi_alloc_master(struct device *host, unsigned size);
+
+extern int spi_register_master(struct spi_master *master);
+extern void spi_unregister_master(struct spi_master *master);
+
+extern struct spi_master *spi_busnum_to_master(u16 busnum);
+
+/*---------------------------------------------------------------------------*/
+
+/*
+ * I/O INTERFACE between SPI controller and protocol drivers
+ *
+ * Protocol drivers use a queue of spi_messages, each transferring data
+ * between the controller and memory buffers.
+ *
+ * The spi_messages themselves consist of a series of read+write transfer
+ * segments.  Those segments always read the same number of bits as they
+ * write; but one or the other is easily ignored by passing a null buffer
+ * pointer.  (This is unlike most types of I/O API, because SPI hardware
+ * is full duplex.)
+ *
+ * NOTE:  Allocation of spi_transfer and spi_message memory is entirely
+ * up to the protocol driver, which guarantees the integrity of both (as
+ * well as the data buffers) for as long as the message is queued.
+ */
+
+/**
+ * struct spi_transfer - a read/write buffer pair
+ * @tx_buf: data to be written (dma-safe memory), or NULL
+ * @rx_buf: data to be read (dma-safe memory), or NULL
+ * @tx_dma: DMA address of tx_buf, if @spi_message.is_dma_mapped
+ * @rx_dma: DMA address of rx_buf, if @spi_message.is_dma_mapped
+ * @len: size of rx and tx buffers (in bytes)
+ * @speed_hz: Select a speed other than the device default for this
+ *      transfer. If 0 the default (from @spi_device) is used.
+ * @bits_per_word: select a bits_per_word other than the device default
+ *      for this transfer. If 0 the default (from @spi_device) is used.
+ * @cs_change: affects chipselect after this transfer completes
+ * @delay_usecs: microseconds to delay after this transfer before
+ *	(optionally) changing the chipselect status, then starting
+ *	the next transfer or completing this @spi_message.
+ * @transfer_list: transfers are sequenced through @spi_message.transfers
+ *
+ * SPI transfers always write the same number of bytes as they read.
+ * Protocol drivers should always provide @rx_buf and/or @tx_buf.
+ * In some cases, they may also want to provide DMA addresses for
+ * the data being transferred; that may reduce overhead, when the
+ * underlying driver uses dma.
+ *
+ * If the transmit buffer is null, zeroes will be shifted out
+ * while filling @rx_buf.  If the receive buffer is null, the data
+ * shifted in will be discarded.  Only "len" bytes shift out (or in).
+ * It's an error to try to shift out a partial word.  (For example, by
+ * shifting out three bytes with word size of sixteen or twenty bits;
+ * the former uses two bytes per word, the latter uses four bytes.)
+ *
+ * In-memory data values are always in native CPU byte order, translated
+ * from the wire byte order (big-endian except with SPI_LSB_FIRST).  So
+ * for example when bits_per_word is sixteen, buffers are 2N bytes long
+ * (@len = 2N) and hold N sixteen bit words in CPU byte order.
+ *
+ * When the word size of the SPI transfer is not a power-of-two multiple
+ * of eight bits, those in-memory words include extra bits.  In-memory
+ * words are always seen by protocol drivers as right-justified, so the
+ * undefined (rx) or unused (tx) bits are always the most significant bits.
+ *
+ * All SPI transfers start with the relevant chipselect active.  Normally
+ * it stays selected until after the last transfer in a message.  Drivers
+ * can affect the chipselect signal using cs_change.
+ *
+ * (i) If the transfer isn't the last one in the message, this flag is
+ * used to make the chipselect briefly go inactive in the middle of the
+ * message.  Toggling chipselect in this way may be needed to terminate
+ * a chip command, letting a single spi_message perform all of group of
+ * chip transactions together.
+ *
+ * (ii) When the transfer is the last one in the message, the chip may
+ * stay selected until the next transfer.  On multi-device SPI busses
+ * with nothing blocking messages going to other devices, this is just
+ * a performance hint; starting a message to another device deselects
+ * this one.  But in other cases, this can be used to ensure correctness.
+ * Some devices need protocol transactions to be built from a series of
+ * spi_message submissions, where the content of one message is determined
+ * by the results of previous messages and where the whole transaction
+ * ends when the chipselect goes intactive.
+ *
+ * The code that submits an spi_message (and its spi_transfers)
+ * to the lower layers is responsible for managing its memory.
+ * Zero-initialize every field you don't set up explicitly, to
+ * insulate against future API updates.  After you submit a message
+ * and its transfers, ignore them until its completion callback.
+ */
+struct spi_transfer {
+	/* it's ok if tx_buf == rx_buf (right?)
+	 * for MicroWire, one buffer must be null
+	 * buffers must work with dma_*map_single() calls, unless
+	 *   spi_message.is_dma_mapped reports a pre-existing mapping
+	 */
+	const void	*tx_buf;
+	void		*rx_buf;
+	unsigned	len;
+
+	dma_addr_t	tx_dma;
+	dma_addr_t	rx_dma;
+
+	unsigned	cs_change:1;
+	u8		bits_per_word;
+	u16		delay_usecs;
+	u32		speed_hz;
+
+	struct list_head transfer_list;
+};
+
+/**
+ * struct spi_message - one multi-segment SPI transaction
+ * @transfers: list of transfer segments in this transaction
+ * @spi: SPI device to which the transaction is queued
+ * @is_dma_mapped: if true, the caller provided both dma and cpu virtual
+ *	addresses for each transfer buffer
+ * @complete: called to report transaction completions
+ * @context: the argument to complete() when it's called
+ * @actual_length: the total number of bytes that were transferred in all
+ *	successful segments
+ * @status: zero for success, else negative errno
+ * @queue: for use by whichever driver currently owns the message
+ * @state: for use by whichever driver currently owns the message
+ *
+ * A @spi_message is used to execute an atomic sequence of data transfers,
+ * each represented by a struct spi_transfer.  The sequence is "atomic"
+ * in the sense that no other spi_message may use that SPI bus until that
+ * sequence completes.  On some systems, many such sequences can execute as
+ * as single programmed DMA transfer.  On all systems, these messages are
+ * queued, and might complete after transactions to other devices.  Messages
+ * sent to a given spi_device are alway executed in FIFO order.
+ *
+ * The code that submits an spi_message (and its spi_transfers)
+ * to the lower layers is responsible for managing its memory.
+ * Zero-initialize every field you don't set up explicitly, to
+ * insulate against future API updates.  After you submit a message
+ * and its transfers, ignore them until its completion callback.
+ */
+struct spi_message {
+	struct list_head	transfers;
+
+	struct spi_device	*spi;
+
+	unsigned		is_dma_mapped:1;
+
+	/* REVISIT:  we might want a flag affecting the behavior of the
+	 * last transfer ... allowing things like "read 16 bit length L"
+	 * immediately followed by "read L bytes".  Basically imposing
+	 * a specific message scheduling algorithm.
+	 *
+	 * Some controller drivers (message-at-a-time queue processing)
+	 * could provide that as their default scheduling algorithm.  But
+	 * others (with multi-message pipelines) could need a flag to
+	 * tell them about such special cases.
+	 */
+
+	/* completion is reported through a callback */
+	void			(*complete)(void *context);
+	void			*context;
+	unsigned		actual_length;
+	int			status;
+
+	/* for optional use by whatever driver currently owns the
+	 * spi_message ...  between calls to spi_async and then later
+	 * complete(), that's the spi_master controller driver.
+	 */
+	struct list_head	queue;
+	void			*state;
+};
+
+static inline void spi_message_init(struct spi_message *m)
+{
+	memset(m, 0, sizeof *m);
+	INIT_LIST_HEAD(&m->transfers);
+}
+
+static inline void
+spi_message_add_tail(struct spi_transfer *t, struct spi_message *m)
+{
+	list_add_tail(&t->transfer_list, &m->transfers);
+}
+
+static inline void
+spi_transfer_del(struct spi_transfer *t)
+{
+	list_del(&t->transfer_list);
+}
+
+/* It's fine to embed message and transaction structures in other data
+ * structures so long as you don't free them while they're in use.
+ */
+
+static inline struct spi_message *spi_message_alloc(unsigned ntrans, gfp_t flags)
+{
+	struct spi_message *m;
+
+	m = kzalloc(sizeof(struct spi_message)
+			+ ntrans * sizeof(struct spi_transfer),
+			flags);
+	if (m) {
+		unsigned i;
+		struct spi_transfer *t = (struct spi_transfer *)(m + 1);
+
+		INIT_LIST_HEAD(&m->transfers);
+		for (i = 0; i < ntrans; i++, t++)
+			spi_message_add_tail(t, m);
+	}
+	return m;
+}
+
+static inline void spi_message_free(struct spi_message *m)
+{
+	kfree(m);
+}
+
+extern int spi_setup(struct spi_device *spi);
+extern int spi_async(struct spi_device *spi, struct spi_message *message);
+extern int spi_async_locked(struct spi_device *spi,
+			    struct spi_message *message);
+
+/*---------------------------------------------------------------------------*/
+
+/* All these synchronous SPI transfer routines are utilities layered
+ * over the core async transfer primitive.  Here, "synchronous" means
+ * they will sleep uninterruptibly until the async transfer completes.
+ */
+
+extern int spi_sync(struct spi_device *spi, struct spi_message *message);
+extern int spi_sync_locked(struct spi_device *spi, struct spi_message *message);
+extern int spi_bus_lock(struct spi_master *master);
+extern int spi_bus_unlock(struct spi_master *master);
+
+/**
+ * spi_write - SPI synchronous write
+ * @spi: device to which data will be written
+ * @buf: data buffer
+ * @len: data buffer size
+ * Context: can sleep
+ *
+ * This writes the buffer and returns zero or a negative error code.
+ * Callable only from contexts that can sleep.
+ */
+static inline int
+spi_write(struct spi_device *spi, const void *buf, size_t len)
+{
+	struct spi_transfer	t = {
+			.tx_buf		= buf,
+			.len		= len,
+		};
+	struct spi_message	m;
+
+	spi_message_init(&m);
+	spi_message_add_tail(&t, &m);
+	return spi_sync(spi, &m);
+}
+
+/**
+ * spi_read - SPI synchronous read
+ * @spi: device from which data will be read
+ * @buf: data buffer
+ * @len: data buffer size
+ * Context: can sleep
+ *
+ * This reads the buffer and returns zero or a negative error code.
+ * Callable only from contexts that can sleep.
+ */
+static inline int
+spi_read(struct spi_device *spi, void *buf, size_t len)
+{
+	struct spi_transfer	t = {
+			.rx_buf		= buf,
+			.len		= len,
+		};
+	struct spi_message	m;
+
+	spi_message_init(&m);
+	spi_message_add_tail(&t, &m);
+	return spi_sync(spi, &m);
+}
+
+/* this copies txbuf and rxbuf data; for small transfers only! */
+extern int spi_write_then_read(struct spi_device *spi,
+		const void *txbuf, unsigned n_tx,
+		void *rxbuf, unsigned n_rx);
+
+/**
+ * spi_w8r8 - SPI synchronous 8 bit write followed by 8 bit read
+ * @spi: device with which data will be exchanged
+ * @cmd: command to be written before data is read back
+ * Context: can sleep
+ *
+ * This returns the (unsigned) eight bit number returned by the
+ * device, or else a negative error code.  Callable only from
+ * contexts that can sleep.
+ */
+static inline ssize_t spi_w8r8(struct spi_device *spi, u8 cmd)
+{
+	ssize_t			status;
+	u8			result;
+
+	status = spi_write_then_read(spi, &cmd, 1, &result, 1);
+
+	/* return negative errno or unsigned value */
+	return (status < 0) ? status : result;
+}
+
+/**
+ * spi_w8r16 - SPI synchronous 8 bit write followed by 16 bit read
+ * @spi: device with which data will be exchanged
+ * @cmd: command to be written before data is read back
+ * Context: can sleep
+ *
+ * This returns the (unsigned) sixteen bit number returned by the
+ * device, or else a negative error code.  Callable only from
+ * contexts that can sleep.
+ *
+ * The number is returned in wire-order, which is at least sometimes
+ * big-endian.
+ */
+static inline ssize_t spi_w8r16(struct spi_device *spi, u8 cmd)
+{
+	ssize_t			status;
+	u16			result;
+
+	status = spi_write_then_read(spi, &cmd, 1, (u8 *) &result, 2);
+
+	/* return negative errno or unsigned value */
+	return (status < 0) ? status : result;
+}
+
+/*---------------------------------------------------------------------------*/
+
+/*
+ * INTERFACE between board init code and SPI infrastructure.
+ *
+ * No SPI driver ever sees these SPI device table segments, but
+ * it's how the SPI core (or adapters that get hotplugged) grows
+ * the driver model tree.
+ *
+ * As a rule, SPI devices can't be probed.  Instead, board init code
+ * provides a table listing the devices which are present, with enough
+ * information to bind and set up the device's driver.  There's basic
+ * support for nonstatic configurations too; enough to handle adding
+ * parport adapters, or microcontrollers acting as USB-to-SPI bridges.
+ */
+
+/**
+ * struct spi_board_info - board-specific template for a SPI device
+ * @modalias: Initializes spi_device.modalias; identifies the driver.
+ * @platform_data: Initializes spi_device.platform_data; the particular
+ *	data stored there is driver-specific.
+ * @controller_data: Initializes spi_device.controller_data; some
+ *	controllers need hints about hardware setup, e.g. for DMA.
+ * @irq: Initializes spi_device.irq; depends on how the board is wired.
+ * @max_speed_hz: Initializes spi_device.max_speed_hz; based on limits
+ *	from the chip datasheet and board-specific signal quality issues.
+ * @bus_num: Identifies which spi_master parents the spi_device; unused
+ *	by spi_new_device(), and otherwise depends on board wiring.
+ * @chip_select: Initializes spi_device.chip_select; depends on how
+ *	the board is wired.
+ * @mode: Initializes spi_device.mode; based on the chip datasheet, board
+ *	wiring (some devices support both 3WIRE and standard modes), and
+ *	possibly presence of an inverter in the chipselect path.
+ *
+ * When adding new SPI devices to the device tree, these structures serve
+ * as a partial device template.  They hold information which can't always
+ * be determined by drivers.  Information that probe() can establish (such
+ * as the default transfer wordsize) is not included here.
+ *
+ * These structures are used in two places.  Their primary role is to
+ * be stored in tables of board-specific device descriptors, which are
+ * declared early in board initialization and then used (much later) to
+ * populate a controller's device tree after the that controller's driver
+ * initializes.  A secondary (and atypical) role is as a parameter to
+ * spi_new_device() call, which happens after those controller drivers
+ * are active in some dynamic board configuration models.
+ */
+struct spi_board_info {
+	/* the device name and module name are coupled, like platform_bus;
+	 * "modalias" is normally the driver name.
+	 *
+	 * platform_data goes to spi_device.dev.platform_data,
+	 * controller_data goes to spi_device.controller_data,
+	 * irq is copied too
+	 */
+	char		modalias[SPI_NAME_SIZE];
+	const void	*platform_data;
+	void		*controller_data;
+	int		irq;
+
+	/* slower signaling on noisy or low voltage boards */
+	u32		max_speed_hz;
+
+
+	/* bus_num is board specific and matches the bus_num of some
+	 * spi_master that will probably be registered later.
+	 *
+	 * chip_select reflects how this chip is wired to that master;
+	 * it's less than num_chipselect.
+	 */
+	u16		bus_num;
+	u16		chip_select;
+
+	/* mode becomes spi_device.mode, and is essential for chips
+	 * where the default of SPI_CS_HIGH = 0 is wrong.
+	 */
+	u8		mode;
+
+	/* ... may need additional spi_device chip config data here.
+	 * avoid stuff protocol drivers can set; but include stuff
+	 * needed to behave without being bound to a driver:
+	 *  - quirks like clock rate mattering when not selected
+	 */
+};
+
+#ifdef	CONFIG_SPI
+extern int
+spi_register_board_info(struct spi_board_info const *info, unsigned n);
+#else
+/* board init code may ignore whether SPI is configured or not */
+static inline int
+spi_register_board_info(struct spi_board_info const *info, unsigned n)
+	{ return 0; }
+#endif
+
+
+/* If you're hotplugging an adapter with devices (parport, usb, etc)
+ * use spi_new_device() to describe each device.  You can also call
+ * spi_unregister_device() to start making that device vanish, but
+ * normally that would be handled by spi_unregister_master().
+ *
+ * You can also use spi_alloc_device() and spi_add_device() to use a two
+ * stage registration sequence for each spi_device.  This gives the caller
+ * some more control over the spi_device structure before it is registered,
+ * but requires that caller to initialize fields that would otherwise
+ * be defined using the board info.
+ */
+extern struct spi_device *
+spi_alloc_device(struct spi_master *master);
+
+extern int
+spi_add_device(struct spi_device *spi);
+
+extern struct spi_device *
+spi_new_device(struct spi_master *, struct spi_board_info *);
+
+static inline void
+spi_unregister_device(struct spi_device *spi)
+{
+	if (spi)
+		device_unregister(&spi->dev);
+}
+
+extern const struct spi_device_id *
+spi_get_device_id(const struct spi_device *sdev);
+
+#endif /* __LINUX_SPI_H */
diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h
new file mode 100644
index 00000000..f987a2be
--- /dev/null
+++ b/include/linux/spi/spi_bitbang.h
@@ -0,0 +1,52 @@
+#ifndef	__SPI_BITBANG_H
+#define	__SPI_BITBANG_H
+
+#include <linux/workqueue.h>
+
+struct spi_bitbang {
+	struct workqueue_struct	*workqueue;
+	struct work_struct	work;
+
+	spinlock_t		lock;
+	struct list_head	queue;
+	u8			busy;
+	u8			use_dma;
+	u8			flags;		/* extra spi->mode support */
+
+	struct spi_master	*master;
+
+	/* setup_transfer() changes clock and/or wordsize to match settings
+	 * for this transfer; zeroes restore defaults from spi_device.
+	 */
+	int	(*setup_transfer)(struct spi_device *spi,
+			struct spi_transfer *t);
+
+	void	(*chipselect)(struct spi_device *spi, int is_on);
+#define	BITBANG_CS_ACTIVE	1	/* normally nCS, active low */
+#define	BITBANG_CS_INACTIVE	0
+
+	/* txrx_bufs() may handle dma mapping for transfers that don't
+	 * already have one (transfer.{tx,rx}_dma is zero), or use PIO
+	 */
+	int	(*txrx_bufs)(struct spi_device *spi, struct spi_transfer *t);
+
+	/* txrx_word[SPI_MODE_*]() just looks like a shift register */
+	u32	(*txrx_word[4])(struct spi_device *spi,
+			unsigned nsecs,
+			u32 word, u8 bits);
+};
+
+/* you can call these default bitbang->master methods from your custom
+ * methods, if you like.
+ */
+extern int spi_bitbang_setup(struct spi_device *spi);
+extern void spi_bitbang_cleanup(struct spi_device *spi);
+extern int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m);
+extern int spi_bitbang_setup_transfer(struct spi_device *spi,
+				      struct spi_transfer *t);
+
+/* start or stop queue processing */
+extern int spi_bitbang_start(struct spi_bitbang *spi);
+extern int spi_bitbang_stop(struct spi_bitbang *spi);
+
+#endif	/* __SPI_BITBANG_H */
diff --git a/include/linux/spi/spi_gpio.h b/include/linux/spi/spi_gpio.h
new file mode 100644
index 00000000..369b3d7d
--- /dev/null
+++ b/include/linux/spi/spi_gpio.h
@@ -0,0 +1,71 @@
+#ifndef __LINUX_SPI_GPIO_H
+#define __LINUX_SPI_GPIO_H
+
+/*
+ * For each bitbanged SPI bus, set up a platform_device node with:
+ *   - name "spi_gpio"
+ *   - id the same as the SPI bus number it implements
+ *   - dev.platform data pointing to a struct spi_gpio_platform_data
+ *
+ * Or, see the driver code for information about speedups that are
+ * possible on platforms that support inlined access for GPIOs (no
+ * spi_gpio_platform_data is used).
+ *
+ * Use spi_board_info with these busses in the usual way, being sure
+ * that the controller_data being the GPIO used for each device's
+ * chipselect:
+ *
+ *	static struct spi_board_info ... [] = {
+ *	...
+ *		// this slave uses GPIO 42 for its chipselect
+ *		.controller_data = (void *) 42,
+ *	...
+ *		// this one uses GPIO 86 for its chipselect
+ *		.controller_data = (void *) 86,
+ *	...
+ *	};
+ *
+ * If chipselect is not used (there's only one device on the bus), assign
+ * SPI_GPIO_NO_CHIPSELECT to the controller_data:
+ *		.controller_data = (void *) SPI_GPIO_NO_CHIPSELECT;
+ *
+ * If the MISO or MOSI pin is not available then it should be set to
+ * SPI_GPIO_NO_MISO or SPI_GPIO_NO_MOSI.
+ *
+ * If the bitbanged bus is later switched to a "native" controller,
+ * that platform_device and controller_data should be removed.
+ */
+
+#define SPI_GPIO_NO_CHIPSELECT		((unsigned long)-1l)
+#define SPI_GPIO_NO_MISO		((unsigned long)-1l)
+#define SPI_GPIO_NO_MOSI		((unsigned long)-1l)
+
+/**
+ * struct spi_gpio_platform_data - parameter for bitbanged SPI master
+ * @sck: number of the GPIO used for clock output
+ * @mosi: number of the GPIO used for Master Output, Slave In (MOSI) data
+ * @miso: number of the GPIO used for Master Input, Slave Output (MISO) data
+ * @num_chipselect: how many slaves to allow
+ *
+ * All GPIO signals used with the SPI bus managed through this driver
+ * (chipselects, MOSI, MISO, SCK) must be configured as GPIOs, instead
+ * of some alternate function.
+ *
+ * It can be convenient to use this driver with pins that have alternate
+ * functions associated with a "native" SPI controller if a driver for that
+ * controller is not available, or is missing important functionality.
+ *
+ * On platforms which can do so, configure MISO with a weak pullup unless
+ * there's an external pullup on that signal.  That saves power by avoiding
+ * floating signals.  (A weak pulldown would save power too, but many
+ * drivers expect to see all-ones data as the no slave "response".)
+ */
+struct spi_gpio_platform_data {
+	unsigned	sck;
+	unsigned	mosi;
+	unsigned	miso;
+
+	u16		num_chipselect;
+};
+
+#endif /* __LINUX_SPI_GPIO_H */
diff --git a/include/linux/spi/spi_oc_tiny.h b/include/linux/spi/spi_oc_tiny.h
new file mode 100644
index 00000000..1ac529cf
--- /dev/null
+++ b/include/linux/spi/spi_oc_tiny.h
@@ -0,0 +1,20 @@
+#ifndef _LINUX_SPI_SPI_OC_TINY_H
+#define _LINUX_SPI_SPI_OC_TINY_H
+
+/**
+ * struct tiny_spi_platform_data - platform data of the OpenCores tiny SPI
+ * @freq:	input clock freq to the core.
+ * @baudwidth:	baud rate divider width of the core.
+ * @gpio_cs_count:	number of gpio pins used for chipselect.
+ * @gpio_cs:	array of gpio pins used for chipselect.
+ *
+ * freq and baudwidth are used only if the divider is programmable.
+ */
+struct tiny_spi_platform_data {
+	unsigned int freq;
+	unsigned int baudwidth;
+	unsigned int gpio_cs_count;
+	int *gpio_cs;
+};
+
+#endif /* _LINUX_SPI_SPI_OC_TINY_H */
diff --git a/include/linux/spi/spidev.h b/include/linux/spi/spidev.h
new file mode 100644
index 00000000..52d9ed01
--- /dev/null
+++ b/include/linux/spi/spidev.h
@@ -0,0 +1,131 @@
+/*
+ * include/linux/spi/spidev.h
+ *
+ * Copyright (C) 2006 SWAPP
+ *	Andrea Paterniani <a.paterniani@swapp-eng.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+  */
+
+#ifndef SPIDEV_H
+#define SPIDEV_H
+
+#include <linux/types.h>
+
+/* User space versions of kernel symbols for SPI clocking modes,
+ * matching <linux/spi/spi.h>
+ */
+
+#define SPI_CPHA		0x01
+#define SPI_CPOL		0x02
+
+#define SPI_MODE_0		(0|0)
+#define SPI_MODE_1		(0|SPI_CPHA)
+#define SPI_MODE_2		(SPI_CPOL|0)
+#define SPI_MODE_3		(SPI_CPOL|SPI_CPHA)
+
+#define SPI_CS_HIGH		0x04
+#define SPI_LSB_FIRST		0x08
+#define SPI_3WIRE		0x10
+#define SPI_LOOP		0x20
+#define SPI_NO_CS		0x40
+#define SPI_READY		0x80
+
+/*---------------------------------------------------------------------------*/
+
+/* IOCTL commands */
+
+#define SPI_IOC_MAGIC			'k'
+
+/**
+ * struct spi_ioc_transfer - describes a single SPI transfer
+ * @tx_buf: Holds pointer to userspace buffer with transmit data, or null.
+ *	If no data is provided, zeroes are shifted out.
+ * @rx_buf: Holds pointer to userspace buffer for receive data, or null.
+ * @len: Length of tx and rx buffers, in bytes.
+ * @speed_hz: Temporary override of the device's bitrate.
+ * @bits_per_word: Temporary override of the device's wordsize.
+ * @delay_usecs: If nonzero, how long to delay after the last bit transfer
+ *	before optionally deselecting the device before the next transfer.
+ * @cs_change: True to deselect device before starting the next transfer.
+ *
+ * This structure is mapped directly to the kernel spi_transfer structure;
+ * the fields have the same meanings, except of course that the pointers
+ * are in a different address space (and may be of different sizes in some
+ * cases, such as 32-bit i386 userspace over a 64-bit x86_64 kernel).
+ * Zero-initialize the structure, including currently unused fields, to
+ * accommodate potential future updates.
+ *
+ * SPI_IOC_MESSAGE gives userspace the equivalent of kernel spi_sync().
+ * Pass it an array of related transfers, they'll execute together.
+ * Each transfer may be half duplex (either direction) or full duplex.
+ *
+ *	struct spi_ioc_transfer mesg[4];
+ *	...
+ *	status = ioctl(fd, SPI_IOC_MESSAGE(4), mesg);
+ *
+ * So for example one transfer might send a nine bit command (right aligned
+ * in a 16-bit word), the next could read a block of 8-bit data before
+ * terminating that command by temporarily deselecting the chip; the next
+ * could send a different nine bit command (re-selecting the chip), and the
+ * last transfer might write some register values.
+ */
+struct spi_ioc_transfer {
+	__u64		tx_buf;
+	__u64		rx_buf;
+
+	__u32		len;
+	__u32		speed_hz;
+
+	__u16		delay_usecs;
+	__u8		bits_per_word;
+	__u8		cs_change;
+	__u32		pad;
+
+	/* If the contents of 'struct spi_ioc_transfer' ever change
+	 * incompatibly, then the ioctl number (currently 0) must change;
+	 * ioctls with constant size fields get a bit more in the way of
+	 * error checking than ones (like this) where that field varies.
+	 *
+	 * NOTE: struct layout is the same in 64bit and 32bit userspace.
+	 */
+};
+
+/* not all platforms use <asm-generic/ioctl.h> or _IOC_TYPECHECK() ... */
+#define SPI_MSGSIZE(N) \
+	((((N)*(sizeof (struct spi_ioc_transfer))) < (1 << _IOC_SIZEBITS)) \
+		? ((N)*(sizeof (struct spi_ioc_transfer))) : 0)
+#define SPI_IOC_MESSAGE(N) _IOW(SPI_IOC_MAGIC, 0, char[SPI_MSGSIZE(N)])
+
+
+/* Read / Write of SPI mode (SPI_MODE_0..SPI_MODE_3) */
+#define SPI_IOC_RD_MODE			_IOR(SPI_IOC_MAGIC, 1, __u8)
+#define SPI_IOC_WR_MODE			_IOW(SPI_IOC_MAGIC, 1, __u8)
+
+/* Read / Write SPI bit justification */
+#define SPI_IOC_RD_LSB_FIRST		_IOR(SPI_IOC_MAGIC, 2, __u8)
+#define SPI_IOC_WR_LSB_FIRST		_IOW(SPI_IOC_MAGIC, 2, __u8)
+
+/* Read / Write SPI device word length (1..N) */
+#define SPI_IOC_RD_BITS_PER_WORD	_IOR(SPI_IOC_MAGIC, 3, __u8)
+#define SPI_IOC_WR_BITS_PER_WORD	_IOW(SPI_IOC_MAGIC, 3, __u8)
+
+/* Read / Write SPI device default max speed hz */
+#define SPI_IOC_RD_MAX_SPEED_HZ		_IOR(SPI_IOC_MAGIC, 4, __u32)
+#define SPI_IOC_WR_MAX_SPEED_HZ		_IOW(SPI_IOC_MAGIC, 4, __u32)
+
+
+
+#endif /* SPIDEV_H */
diff --git a/include/linux/spi/tdo24m.h b/include/linux/spi/tdo24m.h
new file mode 100644
index 00000000..7572d4e1
--- /dev/null
+++ b/include/linux/spi/tdo24m.h
@@ -0,0 +1,13 @@
+#ifndef __TDO24M_H__
+#define __TDO24M_H__
+
+enum tdo24m_model {
+	TDO24M,
+	TDO35S,
+};
+
+struct tdo24m_platform_data {
+	enum tdo24m_model model;
+};
+
+#endif /* __TDO24M_H__ */
diff --git a/include/linux/spi/tle62x0.h b/include/linux/spi/tle62x0.h
new file mode 100644
index 00000000..60b59187
--- /dev/null
+++ b/include/linux/spi/tle62x0.h
@@ -0,0 +1,24 @@
+/*
+ * tle62x0.h - platform glue to Infineon TLE62x0 driver chips
+ *
+ * Copyright 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+struct tle62x0_pdata {
+	unsigned int		init_state;
+	unsigned int		gpio_count;
+};
diff --git a/include/linux/spi/tsc2005.h b/include/linux/spi/tsc2005.h
new file mode 100644
index 00000000..d9b0c842
--- /dev/null
+++ b/include/linux/spi/tsc2005.h
@@ -0,0 +1,41 @@
+/*
+ * This file is part of TSC2005 touchscreen driver
+ *
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Contact: Aaro Koskinen <aaro.koskinen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef _LINUX_SPI_TSC2005_H
+#define _LINUX_SPI_TSC2005_H
+
+#include <linux/types.h>
+
+struct tsc2005_platform_data {
+	int		ts_pressure_max;
+	int		ts_pressure_fudge;
+	int		ts_x_max;
+	int		ts_x_fudge;
+	int		ts_y_max;
+	int		ts_y_fudge;
+	int		ts_x_plate_ohm;
+	unsigned int	esd_timeout_ms;
+	void		(*set_reset)(bool enable);
+};
+
+#endif
diff --git a/include/linux/spi/xilinx_spi.h b/include/linux/spi/xilinx_spi.h
new file mode 100644
index 00000000..6f172788
--- /dev/null
+++ b/include/linux/spi/xilinx_spi.h
@@ -0,0 +1,20 @@
+#ifndef __LINUX_SPI_XILINX_SPI_H
+#define __LINUX_SPI_XILINX_SPI_H
+
+/**
+ * struct xspi_platform_data - Platform data of the Xilinx SPI driver
+ * @num_chipselect:	Number of chip select by the IP.
+ * @little_endian:	If registers should be accessed little endian or not.
+ * @bits_per_word:	Number of bits per word.
+ * @devices:		Devices to add when the driver is probed.
+ * @num_devices:	Number of devices in the devices array.
+ */
+struct xspi_platform_data {
+	u16 num_chipselect;
+	bool little_endian;
+	u8 bits_per_word;
+	struct spi_board_info *devices;
+	u8 num_devices;
+};
+
+#endif /* __LINUX_SPI_XILINX_SPI_H */
diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h
new file mode 100644
index 00000000..7d537ced
--- /dev/null
+++ b/include/linux/spinlock.h
@@ -0,0 +1,397 @@
+#ifndef __LINUX_SPINLOCK_H
+#define __LINUX_SPINLOCK_H
+
+/*
+ * include/linux/spinlock.h - generic spinlock/rwlock declarations
+ *
+ * here's the role of the various spinlock/rwlock related include files:
+ *
+ * on SMP builds:
+ *
+ *  asm/spinlock_types.h: contains the arch_spinlock_t/arch_rwlock_t and the
+ *                        initializers
+ *
+ *  linux/spinlock_types.h:
+ *                        defines the generic type and initializers
+ *
+ *  asm/spinlock.h:       contains the arch_spin_*()/etc. lowlevel
+ *                        implementations, mostly inline assembly code
+ *
+ *   (also included on UP-debug builds:)
+ *
+ *  linux/spinlock_api_smp.h:
+ *                        contains the prototypes for the _spin_*() APIs.
+ *
+ *  linux/spinlock.h:     builds the final spin_*() APIs.
+ *
+ * on UP builds:
+ *
+ *  linux/spinlock_type_up.h:
+ *                        contains the generic, simplified UP spinlock type.
+ *                        (which is an empty structure on non-debug builds)
+ *
+ *  linux/spinlock_types.h:
+ *                        defines the generic type and initializers
+ *
+ *  linux/spinlock_up.h:
+ *                        contains the arch_spin_*()/etc. version of UP
+ *                        builds. (which are NOPs on non-debug, non-preempt
+ *                        builds)
+ *
+ *   (included on UP-non-debug builds:)
+ *
+ *  linux/spinlock_api_up.h:
+ *                        builds the _spin_*() APIs.
+ *
+ *  linux/spinlock.h:     builds the final spin_*() APIs.
+ */
+
+#include <linux/typecheck.h>
+#include <linux/preempt.h>
+#include <linux/linkage.h>
+#include <linux/compiler.h>
+#include <linux/irqflags.h>
+#include <linux/thread_info.h>
+#include <linux/kernel.h>
+#include <linux/stringify.h>
+#include <linux/bottom_half.h>
+#include <asm/barrier.h>
+
+
+/*
+ * Must define these before including other files, inline functions need them
+ */
+#define LOCK_SECTION_NAME ".text..lock."KBUILD_BASENAME
+
+#define LOCK_SECTION_START(extra)               \
+        ".subsection 1\n\t"                     \
+        extra                                   \
+        ".ifndef " LOCK_SECTION_NAME "\n\t"     \
+        LOCK_SECTION_NAME ":\n\t"               \
+        ".endif\n"
+
+#define LOCK_SECTION_END                        \
+        ".previous\n\t"
+
+#define __lockfunc __attribute__((section(".spinlock.text")))
+
+/*
+ * Pull the arch_spinlock_t and arch_rwlock_t definitions:
+ */
+#include <linux/spinlock_types.h>
+
+/*
+ * Pull the arch_spin*() functions/declarations (UP-nondebug doesn't need them):
+ */
+#ifdef CONFIG_SMP
+# include <asm/spinlock.h>
+#else
+# include <linux/spinlock_up.h>
+#endif
+
+#ifdef CONFIG_DEBUG_SPINLOCK
+  extern void __raw_spin_lock_init(raw_spinlock_t *lock, const char *name,
+				   struct lock_class_key *key);
+# define raw_spin_lock_init(lock)				\
+do {								\
+	static struct lock_class_key __key;			\
+								\
+	__raw_spin_lock_init((lock), #lock, &__key);		\
+} while (0)
+
+#else
+# define raw_spin_lock_init(lock)				\
+	do { *(lock) = __RAW_SPIN_LOCK_UNLOCKED(lock); } while (0)
+#endif
+
+#define raw_spin_is_locked(lock)	arch_spin_is_locked(&(lock)->raw_lock)
+
+#ifdef CONFIG_GENERIC_LOCKBREAK
+#define raw_spin_is_contended(lock) ((lock)->break_lock)
+#else
+
+#ifdef arch_spin_is_contended
+#define raw_spin_is_contended(lock)	arch_spin_is_contended(&(lock)->raw_lock)
+#else
+#define raw_spin_is_contended(lock)	(((void)(lock), 0))
+#endif /*arch_spin_is_contended*/
+#endif
+
+/* The lock does not imply full memory barrier. */
+#ifndef ARCH_HAS_SMP_MB_AFTER_LOCK
+static inline void smp_mb__after_lock(void) { smp_mb(); }
+#endif
+
+/**
+ * raw_spin_unlock_wait - wait until the spinlock gets unlocked
+ * @lock: the spinlock in question.
+ */
+#define raw_spin_unlock_wait(lock)	arch_spin_unlock_wait(&(lock)->raw_lock)
+
+#ifdef CONFIG_DEBUG_SPINLOCK
+ extern void do_raw_spin_lock(raw_spinlock_t *lock) __acquires(lock);
+#define do_raw_spin_lock_flags(lock, flags) do_raw_spin_lock(lock)
+ extern int do_raw_spin_trylock(raw_spinlock_t *lock);
+ extern void do_raw_spin_unlock(raw_spinlock_t *lock) __releases(lock);
+#else
+static inline void do_raw_spin_lock(raw_spinlock_t *lock) __acquires(lock)
+{
+	__acquire(lock);
+	arch_spin_lock(&lock->raw_lock);
+}
+
+static inline void
+do_raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long *flags) __acquires(lock)
+{
+	__acquire(lock);
+	arch_spin_lock_flags(&lock->raw_lock, *flags);
+}
+
+static inline int do_raw_spin_trylock(raw_spinlock_t *lock)
+{
+	return arch_spin_trylock(&(lock)->raw_lock);
+}
+
+static inline void do_raw_spin_unlock(raw_spinlock_t *lock) __releases(lock)
+{
+	arch_spin_unlock(&lock->raw_lock);
+	__release(lock);
+}
+#endif
+
+/*
+ * Define the various spin_lock methods.  Note we define these
+ * regardless of whether CONFIG_SMP or CONFIG_PREEMPT are set. The
+ * various methods are defined as nops in the case they are not
+ * required.
+ */
+#define raw_spin_trylock(lock)	__cond_lock(lock, _raw_spin_trylock(lock))
+
+#define raw_spin_lock(lock)	_raw_spin_lock(lock)
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# define raw_spin_lock_nested(lock, subclass) \
+	_raw_spin_lock_nested(lock, subclass)
+
+# define raw_spin_lock_nest_lock(lock, nest_lock)			\
+	 do {								\
+		 typecheck(struct lockdep_map *, &(nest_lock)->dep_map);\
+		 _raw_spin_lock_nest_lock(lock, &(nest_lock)->dep_map);	\
+	 } while (0)
+#else
+# define raw_spin_lock_nested(lock, subclass)		_raw_spin_lock(lock)
+# define raw_spin_lock_nest_lock(lock, nest_lock)	_raw_spin_lock(lock)
+#endif
+
+#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
+
+#define raw_spin_lock_irqsave(lock, flags)			\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		flags = _raw_spin_lock_irqsave(lock);	\
+	} while (0)
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+#define raw_spin_lock_irqsave_nested(lock, flags, subclass)		\
+	do {								\
+		typecheck(unsigned long, flags);			\
+		flags = _raw_spin_lock_irqsave_nested(lock, subclass);	\
+	} while (0)
+#else
+#define raw_spin_lock_irqsave_nested(lock, flags, subclass)		\
+	do {								\
+		typecheck(unsigned long, flags);			\
+		flags = _raw_spin_lock_irqsave(lock);			\
+	} while (0)
+#endif
+
+#else
+
+#define raw_spin_lock_irqsave(lock, flags)		\
+	do {						\
+		typecheck(unsigned long, flags);	\
+		_raw_spin_lock_irqsave(lock, flags);	\
+	} while (0)
+
+#define raw_spin_lock_irqsave_nested(lock, flags, subclass)	\
+	raw_spin_lock_irqsave(lock, flags)
+
+#endif
+
+#define raw_spin_lock_irq(lock)		_raw_spin_lock_irq(lock)
+#define raw_spin_lock_bh(lock)		_raw_spin_lock_bh(lock)
+#define raw_spin_unlock(lock)		_raw_spin_unlock(lock)
+#define raw_spin_unlock_irq(lock)	_raw_spin_unlock_irq(lock)
+
+#define raw_spin_unlock_irqrestore(lock, flags)		\
+	do {							\
+		typecheck(unsigned long, flags);		\
+		_raw_spin_unlock_irqrestore(lock, flags);	\
+	} while (0)
+#define raw_spin_unlock_bh(lock)	_raw_spin_unlock_bh(lock)
+
+#define raw_spin_trylock_bh(lock) \
+	__cond_lock(lock, _raw_spin_trylock_bh(lock))
+
+#define raw_spin_trylock_irq(lock) \
+({ \
+	local_irq_disable(); \
+	raw_spin_trylock(lock) ? \
+	1 : ({ local_irq_enable(); 0;  }); \
+})
+
+#define raw_spin_trylock_irqsave(lock, flags) \
+({ \
+	local_irq_save(flags); \
+	raw_spin_trylock(lock) ? \
+	1 : ({ local_irq_restore(flags); 0; }); \
+})
+
+/**
+ * raw_spin_can_lock - would raw_spin_trylock() succeed?
+ * @lock: the spinlock in question.
+ */
+#define raw_spin_can_lock(lock)	(!raw_spin_is_locked(lock))
+
+/* Include rwlock functions */
+#include <linux/rwlock.h>
+
+/*
+ * Pull the _spin_*()/_read_*()/_write_*() functions/declarations:
+ */
+#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
+# include <linux/spinlock_api_smp.h>
+#else
+# include <linux/spinlock_api_up.h>
+#endif
+
+/*
+ * Map the spin_lock functions to the raw variants for PREEMPT_RT=n
+ */
+
+static inline raw_spinlock_t *spinlock_check(spinlock_t *lock)
+{
+	return &lock->rlock;
+}
+
+#define spin_lock_init(_lock)				\
+do {							\
+	spinlock_check(_lock);				\
+	raw_spin_lock_init(&(_lock)->rlock);		\
+} while (0)
+
+static inline void spin_lock(spinlock_t *lock)
+{
+	raw_spin_lock(&lock->rlock);
+}
+
+static inline void spin_lock_bh(spinlock_t *lock)
+{
+	raw_spin_lock_bh(&lock->rlock);
+}
+
+static inline int spin_trylock(spinlock_t *lock)
+{
+	return raw_spin_trylock(&lock->rlock);
+}
+
+#define spin_lock_nested(lock, subclass)			\
+do {								\
+	raw_spin_lock_nested(spinlock_check(lock), subclass);	\
+} while (0)
+
+#define spin_lock_nest_lock(lock, nest_lock)				\
+do {									\
+	raw_spin_lock_nest_lock(spinlock_check(lock), nest_lock);	\
+} while (0)
+
+static inline void spin_lock_irq(spinlock_t *lock)
+{
+	raw_spin_lock_irq(&lock->rlock);
+}
+
+#define spin_lock_irqsave(lock, flags)				\
+do {								\
+	raw_spin_lock_irqsave(spinlock_check(lock), flags);	\
+} while (0)
+
+#define spin_lock_irqsave_nested(lock, flags, subclass)			\
+do {									\
+	raw_spin_lock_irqsave_nested(spinlock_check(lock), flags, subclass); \
+} while (0)
+
+static inline void spin_unlock(spinlock_t *lock)
+{
+	raw_spin_unlock(&lock->rlock);
+}
+
+static inline void spin_unlock_bh(spinlock_t *lock)
+{
+	raw_spin_unlock_bh(&lock->rlock);
+}
+
+static inline void spin_unlock_irq(spinlock_t *lock)
+{
+	raw_spin_unlock_irq(&lock->rlock);
+}
+
+static inline void spin_unlock_irqrestore(spinlock_t *lock, unsigned long flags)
+{
+	raw_spin_unlock_irqrestore(&lock->rlock, flags);
+}
+
+static inline int spin_trylock_bh(spinlock_t *lock)
+{
+	return raw_spin_trylock_bh(&lock->rlock);
+}
+
+static inline int spin_trylock_irq(spinlock_t *lock)
+{
+	return raw_spin_trylock_irq(&lock->rlock);
+}
+
+#define spin_trylock_irqsave(lock, flags)			\
+({								\
+	raw_spin_trylock_irqsave(spinlock_check(lock), flags); \
+})
+
+static inline void spin_unlock_wait(spinlock_t *lock)
+{
+	raw_spin_unlock_wait(&lock->rlock);
+}
+
+static inline int spin_is_locked(spinlock_t *lock)
+{
+	return raw_spin_is_locked(&lock->rlock);
+}
+
+static inline int spin_is_contended(spinlock_t *lock)
+{
+	return raw_spin_is_contended(&lock->rlock);
+}
+
+static inline int spin_can_lock(spinlock_t *lock)
+{
+	return raw_spin_can_lock(&lock->rlock);
+}
+
+#define assert_spin_locked(lock)	assert_raw_spin_locked(&(lock)->rlock)
+
+/*
+ * Pull the atomic_t declaration:
+ * (asm-mips/atomic.h needs above definitions)
+ */
+#include <linux/atomic.h>
+/**
+ * atomic_dec_and_lock - lock on reaching reference count zero
+ * @atomic: the atomic counter
+ * @lock: the spinlock in question
+ *
+ * Decrements @atomic by 1.  If the result is 0, returns true and locks
+ * @lock.  Returns false for all other cases.
+ */
+extern int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock);
+#define atomic_dec_and_lock(atomic, lock) \
+		__cond_lock(lock, _atomic_dec_and_lock(atomic, lock))
+
+#endif /* __LINUX_SPINLOCK_H */
diff --git a/include/linux/spinlock_api_smp.h b/include/linux/spinlock_api_smp.h
new file mode 100644
index 00000000..51df117a
--- /dev/null
+++ b/include/linux/spinlock_api_smp.h
@@ -0,0 +1,196 @@
+#ifndef __LINUX_SPINLOCK_API_SMP_H
+#define __LINUX_SPINLOCK_API_SMP_H
+
+#ifndef __LINUX_SPINLOCK_H
+# error "please don't include this file directly"
+#endif
+
+/*
+ * include/linux/spinlock_api_smp.h
+ *
+ * spinlock API declarations on SMP (and debug)
+ * (implemented in kernel/spinlock.c)
+ *
+ * portions Copyright 2005, Red Hat, Inc., Ingo Molnar
+ * Released under the General Public License (GPL).
+ */
+
+int in_lock_functions(unsigned long addr);
+
+#define assert_raw_spin_locked(x)	BUG_ON(!raw_spin_is_locked(x))
+
+void __lockfunc _raw_spin_lock(raw_spinlock_t *lock)		__acquires(lock);
+void __lockfunc _raw_spin_lock_nested(raw_spinlock_t *lock, int subclass)
+								__acquires(lock);
+void __lockfunc
+_raw_spin_lock_nest_lock(raw_spinlock_t *lock, struct lockdep_map *map)
+								__acquires(lock);
+void __lockfunc _raw_spin_lock_bh(raw_spinlock_t *lock)		__acquires(lock);
+void __lockfunc _raw_spin_lock_irq(raw_spinlock_t *lock)
+								__acquires(lock);
+
+unsigned long __lockfunc _raw_spin_lock_irqsave(raw_spinlock_t *lock)
+								__acquires(lock);
+unsigned long __lockfunc
+_raw_spin_lock_irqsave_nested(raw_spinlock_t *lock, int subclass)
+								__acquires(lock);
+int __lockfunc _raw_spin_trylock(raw_spinlock_t *lock);
+int __lockfunc _raw_spin_trylock_bh(raw_spinlock_t *lock);
+void __lockfunc _raw_spin_unlock(raw_spinlock_t *lock)		__releases(lock);
+void __lockfunc _raw_spin_unlock_bh(raw_spinlock_t *lock)	__releases(lock);
+void __lockfunc _raw_spin_unlock_irq(raw_spinlock_t *lock)	__releases(lock);
+void __lockfunc
+_raw_spin_unlock_irqrestore(raw_spinlock_t *lock, unsigned long flags)
+								__releases(lock);
+
+#ifdef CONFIG_INLINE_SPIN_LOCK
+#define _raw_spin_lock(lock) __raw_spin_lock(lock)
+#endif
+
+#ifdef CONFIG_INLINE_SPIN_LOCK_BH
+#define _raw_spin_lock_bh(lock) __raw_spin_lock_bh(lock)
+#endif
+
+#ifdef CONFIG_INLINE_SPIN_LOCK_IRQ
+#define _raw_spin_lock_irq(lock) __raw_spin_lock_irq(lock)
+#endif
+
+#ifdef CONFIG_INLINE_SPIN_LOCK_IRQSAVE
+#define _raw_spin_lock_irqsave(lock) __raw_spin_lock_irqsave(lock)
+#endif
+
+#ifdef CONFIG_INLINE_SPIN_TRYLOCK
+#define _raw_spin_trylock(lock) __raw_spin_trylock(lock)
+#endif
+
+#ifdef CONFIG_INLINE_SPIN_TRYLOCK_BH
+#define _raw_spin_trylock_bh(lock) __raw_spin_trylock_bh(lock)
+#endif
+
+#ifndef CONFIG_UNINLINE_SPIN_UNLOCK
+#define _raw_spin_unlock(lock) __raw_spin_unlock(lock)
+#endif
+
+#ifdef CONFIG_INLINE_SPIN_UNLOCK_BH
+#define _raw_spin_unlock_bh(lock) __raw_spin_unlock_bh(lock)
+#endif
+
+#ifdef CONFIG_INLINE_SPIN_UNLOCK_IRQ
+#define _raw_spin_unlock_irq(lock) __raw_spin_unlock_irq(lock)
+#endif
+
+#ifdef CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE
+#define _raw_spin_unlock_irqrestore(lock, flags) __raw_spin_unlock_irqrestore(lock, flags)
+#endif
+
+static inline int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+	preempt_disable();
+	if (do_raw_spin_trylock(lock)) {
+		spin_acquire(&lock->dep_map, 0, 1, _RET_IP_);
+		return 1;
+	}
+	preempt_enable();
+	return 0;
+}
+
+/*
+ * If lockdep is enabled then we use the non-preemption spin-ops
+ * even on CONFIG_PREEMPT, because lockdep assumes that interrupts are
+ * not re-enabled during lock-acquire (which the preempt-spin-ops do):
+ */
+#if !defined(CONFIG_GENERIC_LOCKBREAK) || defined(CONFIG_DEBUG_LOCK_ALLOC)
+
+static inline unsigned long __raw_spin_lock_irqsave(raw_spinlock_t *lock)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	preempt_disable();
+	spin_acquire(&lock->dep_map, 0, 0, _RET_IP_);
+	/*
+	 * On lockdep we dont want the hand-coded irq-enable of
+	 * do_raw_spin_lock_flags() code, because lockdep assumes
+	 * that interrupts are not re-enabled during lock-acquire:
+	 */
+#ifdef CONFIG_LOCKDEP
+	LOCK_CONTENDED(lock, do_raw_spin_trylock, do_raw_spin_lock);
+#else
+	do_raw_spin_lock_flags(lock, &flags);
+#endif
+	return flags;
+}
+
+static inline void __raw_spin_lock_irq(raw_spinlock_t *lock)
+{
+	local_irq_disable();
+	preempt_disable();
+	spin_acquire(&lock->dep_map, 0, 0, _RET_IP_);
+	LOCK_CONTENDED(lock, do_raw_spin_trylock, do_raw_spin_lock);
+}
+
+static inline void __raw_spin_lock_bh(raw_spinlock_t *lock)
+{
+	local_bh_disable();
+	preempt_disable();
+	spin_acquire(&lock->dep_map, 0, 0, _RET_IP_);
+	LOCK_CONTENDED(lock, do_raw_spin_trylock, do_raw_spin_lock);
+}
+
+static inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+	preempt_disable();
+	spin_acquire(&lock->dep_map, 0, 0, _RET_IP_);
+	LOCK_CONTENDED(lock, do_raw_spin_trylock, do_raw_spin_lock);
+}
+
+#endif /* CONFIG_PREEMPT */
+
+static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+	spin_release(&lock->dep_map, 1, _RET_IP_);
+	do_raw_spin_unlock(lock);
+	preempt_enable();
+}
+
+static inline void __raw_spin_unlock_irqrestore(raw_spinlock_t *lock,
+					    unsigned long flags)
+{
+	spin_release(&lock->dep_map, 1, _RET_IP_);
+	do_raw_spin_unlock(lock);
+	local_irq_restore(flags);
+	preempt_enable();
+}
+
+static inline void __raw_spin_unlock_irq(raw_spinlock_t *lock)
+{
+	spin_release(&lock->dep_map, 1, _RET_IP_);
+	do_raw_spin_unlock(lock);
+	local_irq_enable();
+	preempt_enable();
+}
+
+static inline void __raw_spin_unlock_bh(raw_spinlock_t *lock)
+{
+	spin_release(&lock->dep_map, 1, _RET_IP_);
+	do_raw_spin_unlock(lock);
+	preempt_enable_no_resched();
+	local_bh_enable_ip((unsigned long)__builtin_return_address(0));
+}
+
+static inline int __raw_spin_trylock_bh(raw_spinlock_t *lock)
+{
+	local_bh_disable();
+	preempt_disable();
+	if (do_raw_spin_trylock(lock)) {
+		spin_acquire(&lock->dep_map, 0, 1, _RET_IP_);
+		return 1;
+	}
+	preempt_enable_no_resched();
+	local_bh_enable_ip((unsigned long)__builtin_return_address(0));
+	return 0;
+}
+
+#include <linux/rwlock_api_smp.h>
+
+#endif /* __LINUX_SPINLOCK_API_SMP_H */
diff --git a/include/linux/spinlock_api_up.h b/include/linux/spinlock_api_up.h
new file mode 100644
index 00000000..af1f4722
--- /dev/null
+++ b/include/linux/spinlock_api_up.h
@@ -0,0 +1,85 @@
+#ifndef __LINUX_SPINLOCK_API_UP_H
+#define __LINUX_SPINLOCK_API_UP_H
+
+#ifndef __LINUX_SPINLOCK_H
+# error "please don't include this file directly"
+#endif
+
+/*
+ * include/linux/spinlock_api_up.h
+ *
+ * spinlock API implementation on UP-nondebug (inlined implementation)
+ *
+ * portions Copyright 2005, Red Hat, Inc., Ingo Molnar
+ * Released under the General Public License (GPL).
+ */
+
+#define in_lock_functions(ADDR)		0
+
+#define assert_raw_spin_locked(lock)	do { (void)(lock); } while (0)
+
+/*
+ * In the UP-nondebug case there's no real locking going on, so the
+ * only thing we have to do is to keep the preempt counts and irq
+ * flags straight, to suppress compiler warnings of unused lock
+ * variables, and to add the proper checker annotations:
+ */
+#define __LOCK(lock) \
+  do { preempt_disable(); __acquire(lock); (void)(lock); } while (0)
+
+#define __LOCK_BH(lock) \
+  do { local_bh_disable(); __LOCK(lock); } while (0)
+
+#define __LOCK_IRQ(lock) \
+  do { local_irq_disable(); __LOCK(lock); } while (0)
+
+#define __LOCK_IRQSAVE(lock, flags) \
+  do { local_irq_save(flags); __LOCK(lock); } while (0)
+
+#define __UNLOCK(lock) \
+  do { preempt_enable(); __release(lock); (void)(lock); } while (0)
+
+#define __UNLOCK_BH(lock) \
+  do { preempt_enable_no_resched(); local_bh_enable(); \
+	  __release(lock); (void)(lock); } while (0)
+
+#define __UNLOCK_IRQ(lock) \
+  do { local_irq_enable(); __UNLOCK(lock); } while (0)
+
+#define __UNLOCK_IRQRESTORE(lock, flags) \
+  do { local_irq_restore(flags); __UNLOCK(lock); } while (0)
+
+#define _raw_spin_lock(lock)			__LOCK(lock)
+#define _raw_spin_lock_nested(lock, subclass)	__LOCK(lock)
+#define _raw_read_lock(lock)			__LOCK(lock)
+#define _raw_write_lock(lock)			__LOCK(lock)
+#define _raw_spin_lock_bh(lock)			__LOCK_BH(lock)
+#define _raw_read_lock_bh(lock)			__LOCK_BH(lock)
+#define _raw_write_lock_bh(lock)		__LOCK_BH(lock)
+#define _raw_spin_lock_irq(lock)		__LOCK_IRQ(lock)
+#define _raw_read_lock_irq(lock)		__LOCK_IRQ(lock)
+#define _raw_write_lock_irq(lock)		__LOCK_IRQ(lock)
+#define _raw_spin_lock_irqsave(lock, flags)	__LOCK_IRQSAVE(lock, flags)
+#define _raw_read_lock_irqsave(lock, flags)	__LOCK_IRQSAVE(lock, flags)
+#define _raw_write_lock_irqsave(lock, flags)	__LOCK_IRQSAVE(lock, flags)
+#define _raw_spin_trylock(lock)			({ __LOCK(lock); 1; })
+#define _raw_read_trylock(lock)			({ __LOCK(lock); 1; })
+#define _raw_write_trylock(lock)			({ __LOCK(lock); 1; })
+#define _raw_spin_trylock_bh(lock)		({ __LOCK_BH(lock); 1; })
+#define _raw_spin_unlock(lock)			__UNLOCK(lock)
+#define _raw_read_unlock(lock)			__UNLOCK(lock)
+#define _raw_write_unlock(lock)			__UNLOCK(lock)
+#define _raw_spin_unlock_bh(lock)		__UNLOCK_BH(lock)
+#define _raw_write_unlock_bh(lock)		__UNLOCK_BH(lock)
+#define _raw_read_unlock_bh(lock)		__UNLOCK_BH(lock)
+#define _raw_spin_unlock_irq(lock)		__UNLOCK_IRQ(lock)
+#define _raw_read_unlock_irq(lock)		__UNLOCK_IRQ(lock)
+#define _raw_write_unlock_irq(lock)		__UNLOCK_IRQ(lock)
+#define _raw_spin_unlock_irqrestore(lock, flags) \
+					__UNLOCK_IRQRESTORE(lock, flags)
+#define _raw_read_unlock_irqrestore(lock, flags) \
+					__UNLOCK_IRQRESTORE(lock, flags)
+#define _raw_write_unlock_irqrestore(lock, flags) \
+					__UNLOCK_IRQRESTORE(lock, flags)
+
+#endif /* __LINUX_SPINLOCK_API_UP_H */
diff --git a/include/linux/spinlock_types.h b/include/linux/spinlock_types.h
new file mode 100644
index 00000000..73548eb1
--- /dev/null
+++ b/include/linux/spinlock_types.h
@@ -0,0 +1,88 @@
+#ifndef __LINUX_SPINLOCK_TYPES_H
+#define __LINUX_SPINLOCK_TYPES_H
+
+/*
+ * include/linux/spinlock_types.h - generic spinlock type definitions
+ *                                  and initializers
+ *
+ * portions Copyright 2005, Red Hat, Inc., Ingo Molnar
+ * Released under the General Public License (GPL).
+ */
+
+#if defined(CONFIG_SMP)
+# include <asm/spinlock_types.h>
+#else
+# include <linux/spinlock_types_up.h>
+#endif
+
+#include <linux/lockdep.h>
+
+typedef struct raw_spinlock {
+	arch_spinlock_t raw_lock;
+#ifdef CONFIG_GENERIC_LOCKBREAK
+	unsigned int break_lock;
+#endif
+#ifdef CONFIG_DEBUG_SPINLOCK
+	unsigned int magic, owner_cpu;
+	void *owner;
+#endif
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	struct lockdep_map dep_map;
+#endif
+} raw_spinlock_t;
+
+#define SPINLOCK_MAGIC		0xdead4ead
+
+#define SPINLOCK_OWNER_INIT	((void *)-1L)
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# define SPIN_DEP_MAP_INIT(lockname)	.dep_map = { .name = #lockname }
+#else
+# define SPIN_DEP_MAP_INIT(lockname)
+#endif
+
+#ifdef CONFIG_DEBUG_SPINLOCK
+# define SPIN_DEBUG_INIT(lockname)		\
+	.magic = SPINLOCK_MAGIC,		\
+	.owner_cpu = -1,			\
+	.owner = SPINLOCK_OWNER_INIT,
+#else
+# define SPIN_DEBUG_INIT(lockname)
+#endif
+
+#define __RAW_SPIN_LOCK_INITIALIZER(lockname)	\
+	{					\
+	.raw_lock = __ARCH_SPIN_LOCK_UNLOCKED,	\
+	SPIN_DEBUG_INIT(lockname)		\
+	SPIN_DEP_MAP_INIT(lockname) }
+
+#define __RAW_SPIN_LOCK_UNLOCKED(lockname)	\
+	(raw_spinlock_t) __RAW_SPIN_LOCK_INITIALIZER(lockname)
+
+#define DEFINE_RAW_SPINLOCK(x)	raw_spinlock_t x = __RAW_SPIN_LOCK_UNLOCKED(x)
+
+typedef struct spinlock {
+	union {
+		struct raw_spinlock rlock;
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# define LOCK_PADSIZE (offsetof(struct raw_spinlock, dep_map))
+		struct {
+			u8 __padding[LOCK_PADSIZE];
+			struct lockdep_map dep_map;
+		};
+#endif
+	};
+} spinlock_t;
+
+#define __SPIN_LOCK_INITIALIZER(lockname) \
+	{ { .rlock = __RAW_SPIN_LOCK_INITIALIZER(lockname) } }
+
+#define __SPIN_LOCK_UNLOCKED(lockname) \
+	(spinlock_t ) __SPIN_LOCK_INITIALIZER(lockname)
+
+#define DEFINE_SPINLOCK(x)	spinlock_t x = __SPIN_LOCK_UNLOCKED(x)
+
+#include <linux/rwlock_types.h>
+
+#endif /* __LINUX_SPINLOCK_TYPES_H */
diff --git a/include/linux/spinlock_types_up.h b/include/linux/spinlock_types_up.h
new file mode 100644
index 00000000..c09b6407
--- /dev/null
+++ b/include/linux/spinlock_types_up.h
@@ -0,0 +1,37 @@
+#ifndef __LINUX_SPINLOCK_TYPES_UP_H
+#define __LINUX_SPINLOCK_TYPES_UP_H
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+/*
+ * include/linux/spinlock_types_up.h - spinlock type definitions for UP
+ *
+ * portions Copyright 2005, Red Hat, Inc., Ingo Molnar
+ * Released under the General Public License (GPL).
+ */
+
+#ifdef CONFIG_DEBUG_SPINLOCK
+
+typedef struct {
+	volatile unsigned int slock;
+} arch_spinlock_t;
+
+#define __ARCH_SPIN_LOCK_UNLOCKED { 1 }
+
+#else
+
+typedef struct { } arch_spinlock_t;
+
+#define __ARCH_SPIN_LOCK_UNLOCKED { }
+
+#endif
+
+typedef struct {
+	/* no debug version on UP */
+} arch_rwlock_t;
+
+#define __ARCH_RW_LOCK_UNLOCKED { }
+
+#endif /* __LINUX_SPINLOCK_TYPES_UP_H */
diff --git a/include/linux/spinlock_up.h b/include/linux/spinlock_up.h
new file mode 100644
index 00000000..a26e2fb6
--- /dev/null
+++ b/include/linux/spinlock_up.h
@@ -0,0 +1,78 @@
+#ifndef __LINUX_SPINLOCK_UP_H
+#define __LINUX_SPINLOCK_UP_H
+
+#ifndef __LINUX_SPINLOCK_H
+# error "please don't include this file directly"
+#endif
+
+#include <asm/processor.h>	/* for cpu_relax() */
+
+/*
+ * include/linux/spinlock_up.h - UP-debug version of spinlocks.
+ *
+ * portions Copyright 2005, Red Hat, Inc., Ingo Molnar
+ * Released under the General Public License (GPL).
+ *
+ * In the debug case, 1 means unlocked, 0 means locked. (the values
+ * are inverted, to catch initialization bugs)
+ *
+ * No atomicity anywhere, we are on UP.
+ */
+
+#ifdef CONFIG_DEBUG_SPINLOCK
+#define arch_spin_is_locked(x)		((x)->slock == 0)
+
+static inline void arch_spin_lock(arch_spinlock_t *lock)
+{
+	lock->slock = 0;
+}
+
+static inline void
+arch_spin_lock_flags(arch_spinlock_t *lock, unsigned long flags)
+{
+	local_irq_save(flags);
+	lock->slock = 0;
+}
+
+static inline int arch_spin_trylock(arch_spinlock_t *lock)
+{
+	char oldval = lock->slock;
+
+	lock->slock = 0;
+
+	return oldval > 0;
+}
+
+static inline void arch_spin_unlock(arch_spinlock_t *lock)
+{
+	lock->slock = 1;
+}
+
+/*
+ * Read-write spinlocks. No debug version.
+ */
+#define arch_read_lock(lock)		do { (void)(lock); } while (0)
+#define arch_write_lock(lock)		do { (void)(lock); } while (0)
+#define arch_read_trylock(lock)	({ (void)(lock); 1; })
+#define arch_write_trylock(lock)	({ (void)(lock); 1; })
+#define arch_read_unlock(lock)		do { (void)(lock); } while (0)
+#define arch_write_unlock(lock)	do { (void)(lock); } while (0)
+
+#else /* DEBUG_SPINLOCK */
+#define arch_spin_is_locked(lock)	((void)(lock), 0)
+/* for sched.c and kernel_lock.c: */
+# define arch_spin_lock(lock)		do { (void)(lock); } while (0)
+# define arch_spin_lock_flags(lock, flags)	do { (void)(lock); } while (0)
+# define arch_spin_unlock(lock)	do { (void)(lock); } while (0)
+# define arch_spin_trylock(lock)	({ (void)(lock); 1; })
+#endif /* DEBUG_SPINLOCK */
+
+#define arch_spin_is_contended(lock)	(((void)(lock), 0))
+
+#define arch_read_can_lock(lock)	(((void)(lock), 1))
+#define arch_write_can_lock(lock)	(((void)(lock), 1))
+
+#define arch_spin_unlock_wait(lock) \
+		do { cpu_relax(); } while (arch_spin_is_locked(lock))
+
+#endif /* __LINUX_SPINLOCK_UP_H */
diff --git a/include/linux/splice.h b/include/linux/splice.h
new file mode 100644
index 00000000..09a545a7
--- /dev/null
+++ b/include/linux/splice.h
@@ -0,0 +1,94 @@
+/*
+ * Function declerations and data structures related to the splice
+ * implementation.
+ *
+ * Copyright (C) 2007 Jens Axboe <jens.axboe@oracle.com>
+ *
+ */
+#ifndef SPLICE_H
+#define SPLICE_H
+
+#include <linux/pipe_fs_i.h>
+
+/*
+ * Flags passed in from splice/tee/vmsplice
+ */
+#define SPLICE_F_MOVE	(0x01)	/* move pages instead of copying */
+#define SPLICE_F_NONBLOCK (0x02) /* don't block on the pipe splicing (but */
+				 /* we may still block on the fd we splice */
+				 /* from/to, of course */
+#define SPLICE_F_MORE	(0x04)	/* expect more data */
+#define SPLICE_F_GIFT	(0x08)	/* pages passed in are a gift */
+
+/*
+ * Passed to the actors
+ */
+struct splice_desc {
+	unsigned int len, total_len;	/* current and remaining length */
+	unsigned int flags;		/* splice flags */
+	/*
+	 * actor() private data
+	 */
+	union {
+		void __user *userptr;	/* memory to write to */
+		struct file *file;	/* file to read/write */
+		void *data;		/* cookie */
+	} u;
+	loff_t pos;			/* file position */
+	size_t num_spliced;		/* number of bytes already spliced */
+	bool need_wakeup;		/* need to wake up writer */
+};
+
+struct partial_page {
+	unsigned int offset;
+	unsigned int len;
+	unsigned long private;
+};
+
+/*
+ * Passed to splice_to_pipe
+ */
+struct splice_pipe_desc {
+	struct page **pages;		/* page map */
+	struct partial_page *partial;	/* pages[] may not be contig */
+	int nr_pages;			/* number of populated pages in map */
+	unsigned int nr_pages_max;	/* pages[] & partial[] arrays size */
+	unsigned int flags;		/* splice flags */
+	const struct pipe_buf_operations *ops;/* ops associated with output pipe */
+	void (*spd_release)(struct splice_pipe_desc *, unsigned int);
+};
+
+typedef int (splice_actor)(struct pipe_inode_info *, struct pipe_buffer *,
+			   struct splice_desc *);
+typedef int (splice_direct_actor)(struct pipe_inode_info *,
+				  struct splice_desc *);
+
+extern ssize_t splice_from_pipe(struct pipe_inode_info *, struct file *,
+				loff_t *, size_t, unsigned int,
+				splice_actor *);
+extern ssize_t __splice_from_pipe(struct pipe_inode_info *,
+				  struct splice_desc *, splice_actor *);
+extern int splice_from_pipe_feed(struct pipe_inode_info *, struct splice_desc *,
+				 splice_actor *);
+extern int splice_from_pipe_next(struct pipe_inode_info *,
+				 struct splice_desc *);
+extern void splice_from_pipe_begin(struct splice_desc *);
+extern void splice_from_pipe_end(struct pipe_inode_info *,
+				 struct splice_desc *);
+extern int pipe_to_file(struct pipe_inode_info *, struct pipe_buffer *,
+			struct splice_desc *);
+
+extern ssize_t splice_to_pipe(struct pipe_inode_info *,
+			      struct splice_pipe_desc *);
+extern ssize_t splice_direct_to_actor(struct file *, struct splice_desc *,
+				      splice_direct_actor *);
+
+/*
+ * for dynamic pipe sizing
+ */
+extern int splice_grow_spd(const struct pipe_inode_info *, struct splice_pipe_desc *);
+extern void splice_shrink_spd(struct splice_pipe_desc *);
+extern void spd_release_page(struct splice_pipe_desc *, unsigned int);
+
+extern const struct pipe_buf_operations page_cache_pipe_buf_ops;
+#endif
diff --git a/include/linux/srcu.h b/include/linux/srcu.h
new file mode 100644
index 00000000..d3d5fa54
--- /dev/null
+++ b/include/linux/srcu.h
@@ -0,0 +1,239 @@
+/*
+ * Sleepable Read-Copy Update mechanism for mutual exclusion
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2006
+ *
+ * Author: Paul McKenney <paulmck@us.ibm.com>
+ *
+ * For detailed explanation of Read-Copy Update mechanism see -
+ * 		Documentation/RCU/ *.txt
+ *
+ */
+
+#ifndef _LINUX_SRCU_H
+#define _LINUX_SRCU_H
+
+#include <linux/mutex.h>
+#include <linux/rcupdate.h>
+
+struct srcu_struct_array {
+	int c[2];
+};
+
+struct srcu_struct {
+	int completed;
+	struct srcu_struct_array __percpu *per_cpu_ref;
+	struct mutex mutex;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	struct lockdep_map dep_map;
+#endif /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
+};
+
+#ifndef CONFIG_PREEMPT
+#define srcu_barrier() barrier()
+#else /* #ifndef CONFIG_PREEMPT */
+#define srcu_barrier()
+#endif /* #else #ifndef CONFIG_PREEMPT */
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+
+int __init_srcu_struct(struct srcu_struct *sp, const char *name,
+		       struct lock_class_key *key);
+
+#define init_srcu_struct(sp) \
+({ \
+	static struct lock_class_key __srcu_key; \
+	\
+	__init_srcu_struct((sp), #sp, &__srcu_key); \
+})
+
+#else /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
+
+int init_srcu_struct(struct srcu_struct *sp);
+
+#endif /* #else #ifdef CONFIG_DEBUG_LOCK_ALLOC */
+
+void cleanup_srcu_struct(struct srcu_struct *sp);
+int __srcu_read_lock(struct srcu_struct *sp) __acquires(sp);
+void __srcu_read_unlock(struct srcu_struct *sp, int idx) __releases(sp);
+void synchronize_srcu(struct srcu_struct *sp);
+void synchronize_srcu_expedited(struct srcu_struct *sp);
+long srcu_batches_completed(struct srcu_struct *sp);
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+
+/**
+ * srcu_read_lock_held - might we be in SRCU read-side critical section?
+ *
+ * If CONFIG_DEBUG_LOCK_ALLOC is selected, returns nonzero iff in an SRCU
+ * read-side critical section.  In absence of CONFIG_DEBUG_LOCK_ALLOC,
+ * this assumes we are in an SRCU read-side critical section unless it can
+ * prove otherwise.
+ *
+ * Checks debug_lockdep_rcu_enabled() to prevent false positives during boot
+ * and while lockdep is disabled.
+ *
+ * Note that if the CPU is in the idle loop from an RCU point of view
+ * (ie: that we are in the section between rcu_idle_enter() and
+ * rcu_idle_exit()) then srcu_read_lock_held() returns false even if
+ * the CPU did an srcu_read_lock().  The reason for this is that RCU
+ * ignores CPUs that are in such a section, considering these as in
+ * extended quiescent state, so such a CPU is effectively never in an
+ * RCU read-side critical section regardless of what RCU primitives it
+ * invokes.  This state of affairs is required --- we need to keep an
+ * RCU-free window in idle where the CPU may possibly enter into low
+ * power mode. This way we can notice an extended quiescent state to
+ * other CPUs that started a grace period. Otherwise we would delay any
+ * grace period as long as we run in the idle task.
+ *
+ * Similarly, we avoid claiming an SRCU read lock held if the current
+ * CPU is offline.
+ */
+static inline int srcu_read_lock_held(struct srcu_struct *sp)
+{
+	if (!debug_lockdep_rcu_enabled())
+		return 1;
+	if (rcu_is_cpu_idle())
+		return 0;
+	if (!rcu_lockdep_current_cpu_online())
+		return 0;
+	return lock_is_held(&sp->dep_map);
+}
+
+#else /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
+
+static inline int srcu_read_lock_held(struct srcu_struct *sp)
+{
+	return 1;
+}
+
+#endif /* #else #ifdef CONFIG_DEBUG_LOCK_ALLOC */
+
+/**
+ * srcu_dereference_check - fetch SRCU-protected pointer for later dereferencing
+ * @p: the pointer to fetch and protect for later dereferencing
+ * @sp: pointer to the srcu_struct, which is used to check that we
+ *	really are in an SRCU read-side critical section.
+ * @c: condition to check for update-side use
+ *
+ * If PROVE_RCU is enabled, invoking this outside of an RCU read-side
+ * critical section will result in an RCU-lockdep splat, unless @c evaluates
+ * to 1.  The @c argument will normally be a logical expression containing
+ * lockdep_is_held() calls.
+ */
+#define srcu_dereference_check(p, sp, c) \
+	__rcu_dereference_check((p), srcu_read_lock_held(sp) || (c), __rcu)
+
+/**
+ * srcu_dereference - fetch SRCU-protected pointer for later dereferencing
+ * @p: the pointer to fetch and protect for later dereferencing
+ * @sp: pointer to the srcu_struct, which is used to check that we
+ *	really are in an SRCU read-side critical section.
+ *
+ * Makes rcu_dereference_check() do the dirty work.  If PROVE_RCU
+ * is enabled, invoking this outside of an RCU read-side critical
+ * section will result in an RCU-lockdep splat.
+ */
+#define srcu_dereference(p, sp) srcu_dereference_check((p), (sp), 0)
+
+/**
+ * srcu_read_lock - register a new reader for an SRCU-protected structure.
+ * @sp: srcu_struct in which to register the new reader.
+ *
+ * Enter an SRCU read-side critical section.  Note that SRCU read-side
+ * critical sections may be nested.  However, it is illegal to
+ * call anything that waits on an SRCU grace period for the same
+ * srcu_struct, whether directly or indirectly.  Please note that
+ * one way to indirectly wait on an SRCU grace period is to acquire
+ * a mutex that is held elsewhere while calling synchronize_srcu() or
+ * synchronize_srcu_expedited().
+ *
+ * Note that srcu_read_lock() and the matching srcu_read_unlock() must
+ * occur in the same context, for example, it is illegal to invoke
+ * srcu_read_unlock() in an irq handler if the matching srcu_read_lock()
+ * was invoked in process context.
+ */
+static inline int srcu_read_lock(struct srcu_struct *sp) __acquires(sp)
+{
+	int retval = __srcu_read_lock(sp);
+
+	rcu_lock_acquire(&(sp)->dep_map);
+	rcu_lockdep_assert(!rcu_is_cpu_idle(),
+			   "srcu_read_lock() used illegally while idle");
+	return retval;
+}
+
+/**
+ * srcu_read_unlock - unregister a old reader from an SRCU-protected structure.
+ * @sp: srcu_struct in which to unregister the old reader.
+ * @idx: return value from corresponding srcu_read_lock().
+ *
+ * Exit an SRCU read-side critical section.
+ */
+static inline void srcu_read_unlock(struct srcu_struct *sp, int idx)
+	__releases(sp)
+{
+	rcu_lockdep_assert(!rcu_is_cpu_idle(),
+			   "srcu_read_unlock() used illegally while idle");
+	rcu_lock_release(&(sp)->dep_map);
+	__srcu_read_unlock(sp, idx);
+}
+
+/**
+ * srcu_read_lock_raw - register a new reader for an SRCU-protected structure.
+ * @sp: srcu_struct in which to register the new reader.
+ *
+ * Enter an SRCU read-side critical section.  Similar to srcu_read_lock(),
+ * but avoids the RCU-lockdep checking.  This means that it is legal to
+ * use srcu_read_lock_raw() in one context, for example, in an exception
+ * handler, and then have the matching srcu_read_unlock_raw() in another
+ * context, for example in the task that took the exception.
+ *
+ * However, the entire SRCU read-side critical section must reside within a
+ * single task.  For example, beware of using srcu_read_lock_raw() in
+ * a device interrupt handler and srcu_read_unlock() in the interrupted
+ * task:  This will not work if interrupts are threaded.
+ */
+static inline int srcu_read_lock_raw(struct srcu_struct *sp)
+{
+	unsigned long flags;
+	int ret;
+
+	local_irq_save(flags);
+	ret =  __srcu_read_lock(sp);
+	local_irq_restore(flags);
+	return ret;
+}
+
+/**
+ * srcu_read_unlock_raw - unregister reader from an SRCU-protected structure.
+ * @sp: srcu_struct in which to unregister the old reader.
+ * @idx: return value from corresponding srcu_read_lock_raw().
+ *
+ * Exit an SRCU read-side critical section without lockdep-RCU checking.
+ * See srcu_read_lock_raw() for more details.
+ */
+static inline void srcu_read_unlock_raw(struct srcu_struct *sp, int idx)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	__srcu_read_unlock(sp, idx);
+	local_irq_restore(flags);
+}
+
+#endif
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
new file mode 100644
index 00000000..d2768318
--- /dev/null
+++ b/include/linux/ssb/ssb.h
@@ -0,0 +1,625 @@
+#ifndef LINUX_SSB_H_
+#define LINUX_SSB_H_
+
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/pci.h>
+#include <linux/mod_devicetable.h>
+#include <linux/dma-mapping.h>
+
+#include <linux/ssb/ssb_regs.h>
+
+
+struct pcmcia_device;
+struct ssb_bus;
+struct ssb_driver;
+
+struct ssb_sprom_core_pwr_info {
+	u8 itssi_2g, itssi_5g;
+	u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh;
+	u16 pa_2g[4], pa_5gl[4], pa_5g[4], pa_5gh[4];
+};
+
+struct ssb_sprom {
+	u8 revision;
+	u8 il0mac[6];		/* MAC address for 802.11b/g */
+	u8 et0mac[6];		/* MAC address for Ethernet */
+	u8 et1mac[6];		/* MAC address for 802.11a */
+	u8 et0phyaddr;		/* MII address for enet0 */
+	u8 et1phyaddr;		/* MII address for enet1 */
+	u8 et0mdcport;		/* MDIO for enet0 */
+	u8 et1mdcport;		/* MDIO for enet1 */
+	u16 board_rev;		/* Board revision number from SPROM. */
+	u16 board_num;		/* Board number from SPROM. */
+	u16 board_type;		/* Board type from SPROM. */
+	u8 country_code;	/* Country Code */
+	char alpha2[2];		/* Country Code as two chars like EU or US */
+	u8 leddc_on_time;	/* LED Powersave Duty Cycle On Count */
+	u8 leddc_off_time;	/* LED Powersave Duty Cycle Off Count */
+	u8 ant_available_a;	/* 2GHz antenna available bits (up to 4) */
+	u8 ant_available_bg;	/* 5GHz antenna available bits (up to 4) */
+	u16 pa0b0;
+	u16 pa0b1;
+	u16 pa0b2;
+	u16 pa1b0;
+	u16 pa1b1;
+	u16 pa1b2;
+	u16 pa1lob0;
+	u16 pa1lob1;
+	u16 pa1lob2;
+	u16 pa1hib0;
+	u16 pa1hib1;
+	u16 pa1hib2;
+	u8 gpio0;		/* GPIO pin 0 */
+	u8 gpio1;		/* GPIO pin 1 */
+	u8 gpio2;		/* GPIO pin 2 */
+	u8 gpio3;		/* GPIO pin 3 */
+	u8 maxpwr_bg;		/* 2.4GHz Amplifier Max Power (in dBm Q5.2) */
+	u8 maxpwr_al;		/* 5.2GHz Amplifier Max Power (in dBm Q5.2) */
+	u8 maxpwr_a;		/* 5.3GHz Amplifier Max Power (in dBm Q5.2) */
+	u8 maxpwr_ah;		/* 5.8GHz Amplifier Max Power (in dBm Q5.2) */
+	u8 itssi_a;		/* Idle TSSI Target for A-PHY */
+	u8 itssi_bg;		/* Idle TSSI Target for B/G-PHY */
+	u8 tri2g;		/* 2.4GHz TX isolation */
+	u8 tri5gl;		/* 5.2GHz TX isolation */
+	u8 tri5g;		/* 5.3GHz TX isolation */
+	u8 tri5gh;		/* 5.8GHz TX isolation */
+	u8 txpid2g[4];		/* 2GHz TX power index */
+	u8 txpid5gl[4];		/* 4.9 - 5.1GHz TX power index */
+	u8 txpid5g[4];		/* 5.1 - 5.5GHz TX power index */
+	u8 txpid5gh[4];		/* 5.5 - ...GHz TX power index */
+	s8 rxpo2g;		/* 2GHz RX power offset */
+	s8 rxpo5g;		/* 5GHz RX power offset */
+	u8 rssisav2g;		/* 2GHz RSSI params */
+	u8 rssismc2g;
+	u8 rssismf2g;
+	u8 bxa2g;		/* 2GHz BX arch */
+	u8 rssisav5g;		/* 5GHz RSSI params */
+	u8 rssismc5g;
+	u8 rssismf5g;
+	u8 bxa5g;		/* 5GHz BX arch */
+	u16 cck2gpo;		/* CCK power offset */
+	u32 ofdm2gpo;		/* 2.4GHz OFDM power offset */
+	u32 ofdm5glpo;		/* 5.2GHz OFDM power offset */
+	u32 ofdm5gpo;		/* 5.3GHz OFDM power offset */
+	u32 ofdm5ghpo;		/* 5.8GHz OFDM power offset */
+	u16 boardflags_lo;	/* Board flags (bits 0-15) */
+	u16 boardflags_hi;	/* Board flags (bits 16-31) */
+	u16 boardflags2_lo;	/* Board flags (bits 32-47) */
+	u16 boardflags2_hi;	/* Board flags (bits 48-63) */
+	/* TODO store board flags in a single u64 */
+
+	struct ssb_sprom_core_pwr_info core_pwr_info[4];
+
+	/* Antenna gain values for up to 4 antennas
+	 * on each band. Values in dBm/4 (Q5.2). Negative gain means the
+	 * loss in the connectors is bigger than the gain. */
+	struct {
+		s8 a0, a1, a2, a3;
+	} antenna_gain;
+
+	struct {
+		struct {
+			u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut;
+		} ghz2;
+		struct {
+			u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut;
+		} ghz5;
+	} fem;
+
+	u16 mcs2gpo[8];
+	u16 mcs5gpo[8];
+	u16 mcs5glpo[8];
+	u16 mcs5ghpo[8];
+	u8 opo;
+
+	u8 rxgainerr2ga[3];
+	u8 rxgainerr5gla[3];
+	u8 rxgainerr5gma[3];
+	u8 rxgainerr5gha[3];
+	u8 rxgainerr5gua[3];
+
+	u8 noiselvl2ga[3];
+	u8 noiselvl5gla[3];
+	u8 noiselvl5gma[3];
+	u8 noiselvl5gha[3];
+	u8 noiselvl5gua[3];
+
+	u8 regrev;
+	u8 txchain;
+	u8 rxchain;
+	u8 antswitch;
+	u16 cddpo;
+	u16 stbcpo;
+	u16 bw40po;
+	u16 bwduppo;
+
+	u8 tempthresh;
+	u8 tempoffset;
+	u16 rawtempsense;
+	u8 measpower;
+	u8 tempsense_slope;
+	u8 tempcorrx;
+	u8 tempsense_option;
+	u8 freqoffset_corr;
+	u8 iqcal_swp_dis;
+	u8 hw_iqcal_en;
+	u8 elna2g;
+	u8 elna5g;
+	u8 phycal_tempdelta;
+	u8 temps_period;
+	u8 temps_hysteresis;
+	u8 measpower1;
+	u8 measpower2;
+	u8 pcieingress_war;
+
+	/* power per rate from sromrev 9 */
+	u16 cckbw202gpo;
+	u16 cckbw20ul2gpo;
+	u32 legofdmbw202gpo;
+	u32 legofdmbw20ul2gpo;
+	u32 legofdmbw205glpo;
+	u32 legofdmbw20ul5glpo;
+	u32 legofdmbw205gmpo;
+	u32 legofdmbw20ul5gmpo;
+	u32 legofdmbw205ghpo;
+	u32 legofdmbw20ul5ghpo;
+	u32 mcsbw202gpo;
+	u32 mcsbw20ul2gpo;
+	u32 mcsbw402gpo;
+	u32 mcsbw205glpo;
+	u32 mcsbw20ul5glpo;
+	u32 mcsbw405glpo;
+	u32 mcsbw205gmpo;
+	u32 mcsbw20ul5gmpo;
+	u32 mcsbw405gmpo;
+	u32 mcsbw205ghpo;
+	u32 mcsbw20ul5ghpo;
+	u32 mcsbw405ghpo;
+	u16 mcs32po;
+	u16 legofdm40duppo;
+	u8 sar2g;
+	u8 sar5g;
+};
+
+/* Information about the PCB the circuitry is soldered on. */
+struct ssb_boardinfo {
+	u16 vendor;
+	u16 type;
+	u8  rev;
+};
+
+
+struct ssb_device;
+/* Lowlevel read/write operations on the device MMIO.
+ * Internal, don't use that outside of ssb. */
+struct ssb_bus_ops {
+	u8 (*read8)(struct ssb_device *dev, u16 offset);
+	u16 (*read16)(struct ssb_device *dev, u16 offset);
+	u32 (*read32)(struct ssb_device *dev, u16 offset);
+	void (*write8)(struct ssb_device *dev, u16 offset, u8 value);
+	void (*write16)(struct ssb_device *dev, u16 offset, u16 value);
+	void (*write32)(struct ssb_device *dev, u16 offset, u32 value);
+#ifdef CONFIG_SSB_BLOCKIO
+	void (*block_read)(struct ssb_device *dev, void *buffer,
+			   size_t count, u16 offset, u8 reg_width);
+	void (*block_write)(struct ssb_device *dev, const void *buffer,
+			    size_t count, u16 offset, u8 reg_width);
+#endif
+};
+
+
+/* Core-ID values. */
+#define SSB_DEV_CHIPCOMMON	0x800
+#define SSB_DEV_ILINE20		0x801
+#define SSB_DEV_SDRAM		0x803
+#define SSB_DEV_PCI		0x804
+#define SSB_DEV_MIPS		0x805
+#define SSB_DEV_ETHERNET	0x806
+#define SSB_DEV_V90		0x807
+#define SSB_DEV_USB11_HOSTDEV	0x808
+#define SSB_DEV_ADSL		0x809
+#define SSB_DEV_ILINE100	0x80A
+#define SSB_DEV_IPSEC		0x80B
+#define SSB_DEV_PCMCIA		0x80D
+#define SSB_DEV_INTERNAL_MEM	0x80E
+#define SSB_DEV_MEMC_SDRAM	0x80F
+#define SSB_DEV_EXTIF		0x811
+#define SSB_DEV_80211		0x812
+#define SSB_DEV_MIPS_3302	0x816
+#define SSB_DEV_USB11_HOST	0x817
+#define SSB_DEV_USB11_DEV	0x818
+#define SSB_DEV_USB20_HOST	0x819
+#define SSB_DEV_USB20_DEV	0x81A
+#define SSB_DEV_SDIO_HOST	0x81B
+#define SSB_DEV_ROBOSWITCH	0x81C
+#define SSB_DEV_PARA_ATA	0x81D
+#define SSB_DEV_SATA_XORDMA	0x81E
+#define SSB_DEV_ETHERNET_GBIT	0x81F
+#define SSB_DEV_PCIE		0x820
+#define SSB_DEV_MIMO_PHY	0x821
+#define SSB_DEV_SRAM_CTRLR	0x822
+#define SSB_DEV_MINI_MACPHY	0x823
+#define SSB_DEV_ARM_1176	0x824
+#define SSB_DEV_ARM_7TDMI	0x825
+
+/* Vendor-ID values */
+#define SSB_VENDOR_BROADCOM	0x4243
+
+/* Some kernel subsystems poke with dev->drvdata, so we must use the
+ * following ugly workaround to get from struct device to struct ssb_device */
+struct __ssb_dev_wrapper {
+	struct device dev;
+	struct ssb_device *sdev;
+};
+
+struct ssb_device {
+	/* Having a copy of the ops pointer in each dev struct
+	 * is an optimization. */
+	const struct ssb_bus_ops *ops;
+
+	struct device *dev, *dma_dev;
+
+	struct ssb_bus *bus;
+	struct ssb_device_id id;
+
+	u8 core_index;
+	unsigned int irq;
+
+	/* Internal-only stuff follows. */
+	void *drvdata;		/* Per-device data */
+	void *devtypedata;	/* Per-devicetype (eg 802.11) data */
+};
+
+/* Go from struct device to struct ssb_device. */
+static inline
+struct ssb_device * dev_to_ssb_dev(struct device *dev)
+{
+	struct __ssb_dev_wrapper *wrap;
+	wrap = container_of(dev, struct __ssb_dev_wrapper, dev);
+	return wrap->sdev;
+}
+
+/* Device specific user data */
+static inline
+void ssb_set_drvdata(struct ssb_device *dev, void *data)
+{
+	dev->drvdata = data;
+}
+static inline
+void * ssb_get_drvdata(struct ssb_device *dev)
+{
+	return dev->drvdata;
+}
+
+/* Devicetype specific user data. This is per device-type (not per device) */
+void ssb_set_devtypedata(struct ssb_device *dev, void *data);
+static inline
+void * ssb_get_devtypedata(struct ssb_device *dev)
+{
+	return dev->devtypedata;
+}
+
+
+struct ssb_driver {
+	const char *name;
+	const struct ssb_device_id *id_table;
+
+	int (*probe)(struct ssb_device *dev, const struct ssb_device_id *id);
+	void (*remove)(struct ssb_device *dev);
+	int (*suspend)(struct ssb_device *dev, pm_message_t state);
+	int (*resume)(struct ssb_device *dev);
+	void (*shutdown)(struct ssb_device *dev);
+
+	struct device_driver drv;
+};
+#define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv)
+
+extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);
+#define ssb_driver_register(drv) \
+	__ssb_driver_register(drv, THIS_MODULE)
+
+extern void ssb_driver_unregister(struct ssb_driver *drv);
+
+
+
+
+enum ssb_bustype {
+	SSB_BUSTYPE_SSB,	/* This SSB bus is the system bus */
+	SSB_BUSTYPE_PCI,	/* SSB is connected to PCI bus */
+	SSB_BUSTYPE_PCMCIA,	/* SSB is connected to PCMCIA bus */
+	SSB_BUSTYPE_SDIO,	/* SSB is connected to SDIO bus */
+};
+
+/* board_vendor */
+#define SSB_BOARDVENDOR_BCM	0x14E4	/* Broadcom */
+#define SSB_BOARDVENDOR_DELL	0x1028	/* Dell */
+#define SSB_BOARDVENDOR_HP	0x0E11	/* HP */
+/* board_type */
+#define SSB_BOARD_BCM94306MP	0x0418
+#define SSB_BOARD_BCM4309G	0x0421
+#define SSB_BOARD_BCM4306CB	0x0417
+#define SSB_BOARD_BCM4309MP	0x040C
+#define SSB_BOARD_MP4318	0x044A
+#define SSB_BOARD_BU4306	0x0416
+#define SSB_BOARD_BU4309	0x040A
+/* chip_package */
+#define SSB_CHIPPACK_BCM4712S	1	/* Small 200pin 4712 */
+#define SSB_CHIPPACK_BCM4712M	2	/* Medium 225pin 4712 */
+#define SSB_CHIPPACK_BCM4712L	0	/* Large 340pin 4712 */
+
+#include <linux/ssb/ssb_driver_chipcommon.h>
+#include <linux/ssb/ssb_driver_mips.h>
+#include <linux/ssb/ssb_driver_extif.h>
+#include <linux/ssb/ssb_driver_pci.h>
+
+struct ssb_bus {
+	/* The MMIO area. */
+	void __iomem *mmio;
+
+	const struct ssb_bus_ops *ops;
+
+	/* The core currently mapped into the MMIO window.
+	 * Not valid on all host-buses. So don't use outside of SSB. */
+	struct ssb_device *mapped_device;
+	union {
+		/* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
+		u8 mapped_pcmcia_seg;
+		/* Current SSB base address window for SDIO. */
+		u32 sdio_sbaddr;
+	};
+	/* Lock for core and segment switching.
+	 * On PCMCIA-host busses this is used to protect the whole MMIO access. */
+	spinlock_t bar_lock;
+
+	/* The host-bus this backplane is running on. */
+	enum ssb_bustype bustype;
+	/* Pointers to the host-bus. Check bustype before using any of these pointers. */
+	union {
+		/* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
+		struct pci_dev *host_pci;
+		/* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
+		struct pcmcia_device *host_pcmcia;
+		/* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */
+		struct sdio_func *host_sdio;
+	};
+
+	/* See enum ssb_quirks */
+	unsigned int quirks;
+
+#ifdef CONFIG_SSB_SPROM
+	/* Mutex to protect the SPROM writing. */
+	struct mutex sprom_mutex;
+#endif
+
+	/* ID information about the Chip. */
+	u16 chip_id;
+	u8 chip_rev;
+	u16 sprom_offset;
+	u16 sprom_size;		/* number of words in sprom */
+	u8 chip_package;
+
+	/* List of devices (cores) on the backplane. */
+	struct ssb_device devices[SSB_MAX_NR_CORES];
+	u8 nr_devices;
+
+	/* Software ID number for this bus. */
+	unsigned int busnumber;
+
+	/* The ChipCommon device (if available). */
+	struct ssb_chipcommon chipco;
+	/* The PCI-core device (if available). */
+	struct ssb_pcicore pcicore;
+	/* The MIPS-core device (if available). */
+	struct ssb_mipscore mipscore;
+	/* The EXTif-core device (if available). */
+	struct ssb_extif extif;
+
+	/* The following structure elements are not available in early
+	 * SSB initialization. Though, they are available for regular
+	 * registered drivers at any stage. So be careful when
+	 * using them in the ssb core code. */
+
+	/* ID information about the PCB. */
+	struct ssb_boardinfo boardinfo;
+	/* Contents of the SPROM. */
+	struct ssb_sprom sprom;
+	/* If the board has a cardbus slot, this is set to true. */
+	bool has_cardbus_slot;
+
+#ifdef CONFIG_SSB_EMBEDDED
+	/* Lock for GPIO register access. */
+	spinlock_t gpio_lock;
+#endif /* EMBEDDED */
+
+	/* Internal-only stuff follows. Do not touch. */
+	struct list_head list;
+#ifdef CONFIG_SSB_DEBUG
+	/* Is the bus already powered up? */
+	bool powered_up;
+	int power_warn_count;
+#endif /* DEBUG */
+};
+
+enum ssb_quirks {
+	/* SDIO connected card requires performing a read after writing a 32-bit value */
+	SSB_QUIRK_SDIO_READ_AFTER_WRITE32	= (1 << 0),
+};
+
+/* The initialization-invariants. */
+struct ssb_init_invariants {
+	/* Versioning information about the PCB. */
+	struct ssb_boardinfo boardinfo;
+	/* The SPROM information. That's either stored in an
+	 * EEPROM or NVRAM on the board. */
+	struct ssb_sprom sprom;
+	/* If the board has a cardbus slot, this is set to true. */
+	bool has_cardbus_slot;
+};
+/* Type of function to fetch the invariants. */
+typedef int (*ssb_invariants_func_t)(struct ssb_bus *bus,
+				     struct ssb_init_invariants *iv);
+
+/* Register a SSB system bus. get_invariants() is called after the
+ * basic system devices are initialized.
+ * The invariants are usually fetched from some NVRAM.
+ * Put the invariants into the struct pointed to by iv. */
+extern int ssb_bus_ssbbus_register(struct ssb_bus *bus,
+				   unsigned long baseaddr,
+				   ssb_invariants_func_t get_invariants);
+#ifdef CONFIG_SSB_PCIHOST
+extern int ssb_bus_pcibus_register(struct ssb_bus *bus,
+				   struct pci_dev *host_pci);
+#endif /* CONFIG_SSB_PCIHOST */
+#ifdef CONFIG_SSB_PCMCIAHOST
+extern int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
+				      struct pcmcia_device *pcmcia_dev,
+				      unsigned long baseaddr);
+#endif /* CONFIG_SSB_PCMCIAHOST */
+#ifdef CONFIG_SSB_SDIOHOST
+extern int ssb_bus_sdiobus_register(struct ssb_bus *bus,
+				    struct sdio_func *sdio_func,
+				    unsigned int quirks);
+#endif /* CONFIG_SSB_SDIOHOST */
+
+
+extern void ssb_bus_unregister(struct ssb_bus *bus);
+
+/* Does the device have an SPROM? */
+extern bool ssb_is_sprom_available(struct ssb_bus *bus);
+
+/* Set a fallback SPROM.
+ * See kdoc at the function definition for complete documentation. */
+extern int ssb_arch_register_fallback_sprom(
+		int (*sprom_callback)(struct ssb_bus *bus,
+		struct ssb_sprom *out));
+
+/* Suspend a SSB bus.
+ * Call this from the parent bus suspend routine. */
+extern int ssb_bus_suspend(struct ssb_bus *bus);
+/* Resume a SSB bus.
+ * Call this from the parent bus resume routine. */
+extern int ssb_bus_resume(struct ssb_bus *bus);
+
+extern u32 ssb_clockspeed(struct ssb_bus *bus);
+
+/* Is the device enabled in hardware? */
+int ssb_device_is_enabled(struct ssb_device *dev);
+/* Enable a device and pass device-specific SSB_TMSLOW flags.
+ * If no device-specific flags are available, use 0. */
+void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags);
+/* Disable a device in hardware and pass SSB_TMSLOW flags (if any). */
+void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags);
+
+
+/* Device MMIO register read/write functions. */
+static inline u8 ssb_read8(struct ssb_device *dev, u16 offset)
+{
+	return dev->ops->read8(dev, offset);
+}
+static inline u16 ssb_read16(struct ssb_device *dev, u16 offset)
+{
+	return dev->ops->read16(dev, offset);
+}
+static inline u32 ssb_read32(struct ssb_device *dev, u16 offset)
+{
+	return dev->ops->read32(dev, offset);
+}
+static inline void ssb_write8(struct ssb_device *dev, u16 offset, u8 value)
+{
+	dev->ops->write8(dev, offset, value);
+}
+static inline void ssb_write16(struct ssb_device *dev, u16 offset, u16 value)
+{
+	dev->ops->write16(dev, offset, value);
+}
+static inline void ssb_write32(struct ssb_device *dev, u16 offset, u32 value)
+{
+	dev->ops->write32(dev, offset, value);
+}
+#ifdef CONFIG_SSB_BLOCKIO
+static inline void ssb_block_read(struct ssb_device *dev, void *buffer,
+				  size_t count, u16 offset, u8 reg_width)
+{
+	dev->ops->block_read(dev, buffer, count, offset, reg_width);
+}
+
+static inline void ssb_block_write(struct ssb_device *dev, const void *buffer,
+				   size_t count, u16 offset, u8 reg_width)
+{
+	dev->ops->block_write(dev, buffer, count, offset, reg_width);
+}
+#endif /* CONFIG_SSB_BLOCKIO */
+
+
+/* The SSB DMA API. Use this API for any DMA operation on the device.
+ * This API basically is a wrapper that calls the correct DMA API for
+ * the host device type the SSB device is attached to. */
+
+/* Translation (routing) bits that need to be ORed to DMA
+ * addresses before they are given to a device. */
+extern u32 ssb_dma_translation(struct ssb_device *dev);
+#define SSB_DMA_TRANSLATION_MASK	0xC0000000
+#define SSB_DMA_TRANSLATION_SHIFT	30
+
+static inline void __cold __ssb_dma_not_implemented(struct ssb_device *dev)
+{
+#ifdef CONFIG_SSB_DEBUG
+	printk(KERN_ERR "SSB: BUG! Calling DMA API for "
+	       "unsupported bustype %d\n", dev->bus->bustype);
+#endif /* DEBUG */
+}
+
+#ifdef CONFIG_SSB_PCIHOST
+/* PCI-host wrapper driver */
+extern int ssb_pcihost_register(struct pci_driver *driver);
+static inline void ssb_pcihost_unregister(struct pci_driver *driver)
+{
+	pci_unregister_driver(driver);
+}
+
+static inline
+void ssb_pcihost_set_power_state(struct ssb_device *sdev, pci_power_t state)
+{
+	if (sdev->bus->bustype == SSB_BUSTYPE_PCI)
+		pci_set_power_state(sdev->bus->host_pci, state);
+}
+#else
+static inline void ssb_pcihost_unregister(struct pci_driver *driver)
+{
+}
+
+static inline
+void ssb_pcihost_set_power_state(struct ssb_device *sdev, pci_power_t state)
+{
+}
+#endif /* CONFIG_SSB_PCIHOST */
+
+
+/* If a driver is shutdown or suspended, call this to signal
+ * that the bus may be completely powered down. SSB will decide,
+ * if it's really time to power down the bus, based on if there
+ * are other devices that want to run. */
+extern int ssb_bus_may_powerdown(struct ssb_bus *bus);
+/* Before initializing and enabling a device, call this to power-up the bus.
+ * If you want to allow use of dynamic-power-control, pass the flag.
+ * Otherwise static always-on powercontrol will be used. */
+extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
+
+extern void ssb_commit_settings(struct ssb_bus *bus);
+
+/* Various helper functions */
+extern u32 ssb_admatch_base(u32 adm);
+extern u32 ssb_admatch_size(u32 adm);
+
+/* PCI device mapping and fixup routines.
+ * Called from the architecture pcibios init code.
+ * These are only available on SSB_EMBEDDED configurations. */
+#ifdef CONFIG_SSB_EMBEDDED
+int ssb_pcibios_plat_dev_init(struct pci_dev *dev);
+int ssb_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+#endif /* CONFIG_SSB_EMBEDDED */
+
+#endif /* LINUX_SSB_H_ */
diff --git a/include/linux/ssb/ssb_driver_chipcommon.h b/include/linux/ssb/ssb_driver_chipcommon.h
new file mode 100644
index 00000000..1a6b0045
--- /dev/null
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
@@ -0,0 +1,665 @@
+#ifndef LINUX_SSB_CHIPCO_H_
+#define LINUX_SSB_CHIPCO_H_
+
+/* SonicsSiliconBackplane CHIPCOMMON core hardware definitions
+ *
+ * The chipcommon core provides chip identification, SB control,
+ * jtag, 0/1/2 uarts, clock frequency control, a watchdog interrupt timer,
+ * gpio interface, extbus, and support for serial and parallel flashes.
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, Michael Buesch <m@bues.ch>
+ *
+ * Licensed under the GPL version 2. See COPYING for details.
+ */
+
+/** ChipCommon core registers. **/
+
+#define SSB_CHIPCO_CHIPID		0x0000
+#define  SSB_CHIPCO_IDMASK		0x0000FFFF
+#define  SSB_CHIPCO_REVMASK		0x000F0000
+#define  SSB_CHIPCO_REVSHIFT		16
+#define  SSB_CHIPCO_PACKMASK		0x00F00000
+#define  SSB_CHIPCO_PACKSHIFT		20
+#define  SSB_CHIPCO_NRCORESMASK		0x0F000000
+#define  SSB_CHIPCO_NRCORESSHIFT	24
+#define SSB_CHIPCO_CAP	 		0x0004		/* Capabilities */
+#define  SSB_CHIPCO_CAP_NRUART		0x00000003	/* # of UARTs */
+#define  SSB_CHIPCO_CAP_MIPSEB		0x00000004	/* MIPS in BigEndian Mode */
+#define  SSB_CHIPCO_CAP_UARTCLK		0x00000018	/* UART clock select */
+#define   SSB_CHIPCO_CAP_UARTCLK_INT	0x00000008	/* UARTs are driven by internal divided clock */
+#define  SSB_CHIPCO_CAP_UARTGPIO	0x00000020	/* UARTs on GPIO 15-12 */
+#define  SSB_CHIPCO_CAP_EXTBUS		0x000000C0	/* External buses present */
+#define  SSB_CHIPCO_CAP_FLASHT		0x00000700	/* Flash Type */
+#define   SSB_CHIPCO_FLASHT_NONE	0x00000000	/* No flash */
+#define   SSB_CHIPCO_FLASHT_STSER	0x00000100	/* ST serial flash */
+#define   SSB_CHIPCO_FLASHT_ATSER	0x00000200	/* Atmel serial flash */
+#define	  SSB_CHIPCO_FLASHT_PARA	0x00000700	/* Parallel flash */
+#define  SSB_CHIPCO_CAP_PLLT		0x00038000	/* PLL Type */
+#define   SSB_PLLTYPE_NONE		0x00000000
+#define   SSB_PLLTYPE_1			0x00010000	/* 48Mhz base, 3 dividers */
+#define   SSB_PLLTYPE_2			0x00020000	/* 48Mhz, 4 dividers */
+#define   SSB_PLLTYPE_3			0x00030000	/* 25Mhz, 2 dividers */
+#define   SSB_PLLTYPE_4			0x00008000	/* 48Mhz, 4 dividers */
+#define   SSB_PLLTYPE_5			0x00018000	/* 25Mhz, 4 dividers */
+#define   SSB_PLLTYPE_6			0x00028000	/* 100/200 or 120/240 only */
+#define   SSB_PLLTYPE_7			0x00038000	/* 25Mhz, 4 dividers */
+#define  SSB_CHIPCO_CAP_PCTL		0x00040000	/* Power Control */
+#define  SSB_CHIPCO_CAP_OTPS		0x00380000	/* OTP size */
+#define  SSB_CHIPCO_CAP_OTPS_SHIFT	19
+#define  SSB_CHIPCO_CAP_OTPS_BASE	5
+#define  SSB_CHIPCO_CAP_JTAGM		0x00400000	/* JTAG master present */
+#define  SSB_CHIPCO_CAP_BROM		0x00800000	/* Internal boot ROM active */
+#define  SSB_CHIPCO_CAP_64BIT		0x08000000	/* 64-bit Backplane */
+#define  SSB_CHIPCO_CAP_PMU		0x10000000	/* PMU available (rev >= 20) */
+#define  SSB_CHIPCO_CAP_ECI		0x20000000	/* ECI available (rev >= 20) */
+#define  SSB_CHIPCO_CAP_SPROM		0x40000000	/* SPROM present */
+#define SSB_CHIPCO_CORECTL		0x0008
+#define  SSB_CHIPCO_CORECTL_UARTCLK0	0x00000001	/* Drive UART with internal clock */
+#define	 SSB_CHIPCO_CORECTL_SE		0x00000002	/* sync clk out enable (corerev >= 3) */
+#define  SSB_CHIPCO_CORECTL_UARTCLKEN	0x00000008	/* UART clock enable (rev >= 21) */
+#define SSB_CHIPCO_BIST			0x000C
+#define SSB_CHIPCO_OTPS			0x0010		/* OTP status */
+#define	 SSB_CHIPCO_OTPS_PROGFAIL	0x80000000
+#define	 SSB_CHIPCO_OTPS_PROTECT	0x00000007
+#define	 SSB_CHIPCO_OTPS_HW_PROTECT	0x00000001
+#define	 SSB_CHIPCO_OTPS_SW_PROTECT	0x00000002
+#define	 SSB_CHIPCO_OTPS_CID_PROTECT	0x00000004
+#define SSB_CHIPCO_OTPC			0x0014		/* OTP control */
+#define	 SSB_CHIPCO_OTPC_RECWAIT	0xFF000000
+#define	 SSB_CHIPCO_OTPC_PROGWAIT	0x00FFFF00
+#define	 SSB_CHIPCO_OTPC_PRW_SHIFT	8
+#define	 SSB_CHIPCO_OTPC_MAXFAIL	0x00000038
+#define	 SSB_CHIPCO_OTPC_VSEL		0x00000006
+#define	 SSB_CHIPCO_OTPC_SELVL		0x00000001
+#define SSB_CHIPCO_OTPP			0x0018		/* OTP prog */
+#define	 SSB_CHIPCO_OTPP_COL		0x000000FF
+#define	 SSB_CHIPCO_OTPP_ROW		0x0000FF00
+#define	 SSB_CHIPCO_OTPP_ROW_SHIFT	8
+#define	 SSB_CHIPCO_OTPP_READERR	0x10000000
+#define	 SSB_CHIPCO_OTPP_VALUE		0x20000000
+#define	 SSB_CHIPCO_OTPP_READ		0x40000000
+#define	 SSB_CHIPCO_OTPP_START		0x80000000
+#define	 SSB_CHIPCO_OTPP_BUSY		0x80000000
+#define SSB_CHIPCO_IRQSTAT		0x0020
+#define SSB_CHIPCO_IRQMASK		0x0024
+#define	 SSB_CHIPCO_IRQ_GPIO		0x00000001	/* gpio intr */
+#define	 SSB_CHIPCO_IRQ_EXT		0x00000002	/* ro: ext intr pin (corerev >= 3) */
+#define	 SSB_CHIPCO_IRQ_WDRESET		0x80000000	/* watchdog reset occurred */
+#define SSB_CHIPCO_CHIPCTL		0x0028		/* Rev >= 11 only */
+#define SSB_CHIPCO_CHIPSTAT		0x002C		/* Rev >= 11 only */
+#define SSB_CHIPCO_JCMD			0x0030		/* Rev >= 10 only */
+#define  SSB_CHIPCO_JCMD_START		0x80000000
+#define  SSB_CHIPCO_JCMD_BUSY		0x80000000
+#define  SSB_CHIPCO_JCMD_PAUSE		0x40000000
+#define  SSB_CHIPCO_JCMD0_ACC_MASK	0x0000F000
+#define  SSB_CHIPCO_JCMD0_ACC_IRDR	0x00000000
+#define  SSB_CHIPCO_JCMD0_ACC_DR	0x00001000
+#define  SSB_CHIPCO_JCMD0_ACC_IR	0x00002000
+#define  SSB_CHIPCO_JCMD0_ACC_RESET	0x00003000
+#define  SSB_CHIPCO_JCMD0_ACC_IRPDR	0x00004000
+#define  SSB_CHIPCO_JCMD0_ACC_PDR	0x00005000
+#define  SSB_CHIPCO_JCMD0_IRW_MASK	0x00000F00
+#define  SSB_CHIPCO_JCMD_ACC_MASK	0x000F0000	/* Changes for corerev 11 */
+#define  SSB_CHIPCO_JCMD_ACC_IRDR	0x00000000
+#define  SSB_CHIPCO_JCMD_ACC_DR		0x00010000
+#define  SSB_CHIPCO_JCMD_ACC_IR		0x00020000
+#define  SSB_CHIPCO_JCMD_ACC_RESET	0x00030000
+#define  SSB_CHIPCO_JCMD_ACC_IRPDR	0x00040000
+#define  SSB_CHIPCO_JCMD_ACC_PDR	0x00050000
+#define  SSB_CHIPCO_JCMD_IRW_MASK	0x00001F00
+#define  SSB_CHIPCO_JCMD_IRW_SHIFT	8
+#define  SSB_CHIPCO_JCMD_DRW_MASK	0x0000003F
+#define SSB_CHIPCO_JIR			0x0034		/* Rev >= 10 only */
+#define SSB_CHIPCO_JDR			0x0038		/* Rev >= 10 only */
+#define SSB_CHIPCO_JCTL			0x003C		/* Rev >= 10 only */
+#define  SSB_CHIPCO_JCTL_FORCE_CLK	4		/* Force clock */
+#define  SSB_CHIPCO_JCTL_EXT_EN		2		/* Enable external targets */
+#define  SSB_CHIPCO_JCTL_EN		1		/* Enable Jtag master */
+#define SSB_CHIPCO_FLASHCTL		0x0040
+#define  SSB_CHIPCO_FLASHCTL_START	0x80000000
+#define  SSB_CHIPCO_FLASHCTL_BUSY	SSB_CHIPCO_FLASHCTL_START
+#define SSB_CHIPCO_FLASHADDR		0x0044
+#define SSB_CHIPCO_FLASHDATA		0x0048
+#define SSB_CHIPCO_BCAST_ADDR		0x0050
+#define SSB_CHIPCO_BCAST_DATA		0x0054
+#define SSB_CHIPCO_GPIOPULLUP		0x0058		/* Rev >= 20 only */
+#define SSB_CHIPCO_GPIOPULLDOWN		0x005C		/* Rev >= 20 only */
+#define SSB_CHIPCO_GPIOIN		0x0060
+#define SSB_CHIPCO_GPIOOUT		0x0064
+#define SSB_CHIPCO_GPIOOUTEN		0x0068
+#define SSB_CHIPCO_GPIOCTL		0x006C
+#define SSB_CHIPCO_GPIOPOL		0x0070
+#define SSB_CHIPCO_GPIOIRQ		0x0074
+#define SSB_CHIPCO_WATCHDOG		0x0080
+#define SSB_CHIPCO_GPIOTIMER		0x0088		/* LED powersave (corerev >= 16) */
+#define  SSB_CHIPCO_GPIOTIMER_OFFTIME	0x0000FFFF
+#define  SSB_CHIPCO_GPIOTIMER_OFFTIME_SHIFT	0
+#define  SSB_CHIPCO_GPIOTIMER_ONTIME	0xFFFF0000
+#define  SSB_CHIPCO_GPIOTIMER_ONTIME_SHIFT	16
+#define SSB_CHIPCO_GPIOTOUTM		0x008C		/* LED powersave (corerev >= 16) */
+#define SSB_CHIPCO_CLOCK_N		0x0090
+#define SSB_CHIPCO_CLOCK_SB		0x0094
+#define SSB_CHIPCO_CLOCK_PCI		0x0098
+#define SSB_CHIPCO_CLOCK_M2		0x009C
+#define SSB_CHIPCO_CLOCK_MIPS		0x00A0
+#define SSB_CHIPCO_CLKDIV		0x00A4		/* Rev >= 3 only */
+#define	 SSB_CHIPCO_CLKDIV_SFLASH	0x0F000000
+#define	 SSB_CHIPCO_CLKDIV_SFLASH_SHIFT	24
+#define	 SSB_CHIPCO_CLKDIV_OTP		0x000F0000
+#define	 SSB_CHIPCO_CLKDIV_OTP_SHIFT	16
+#define	 SSB_CHIPCO_CLKDIV_JTAG		0x00000F00
+#define	 SSB_CHIPCO_CLKDIV_JTAG_SHIFT	8
+#define	 SSB_CHIPCO_CLKDIV_UART		0x000000FF
+#define SSB_CHIPCO_PLLONDELAY		0x00B0		/* Rev >= 4 only */
+#define SSB_CHIPCO_FREFSELDELAY		0x00B4		/* Rev >= 4 only */
+#define SSB_CHIPCO_SLOWCLKCTL		0x00B8		/* 6 <= Rev <= 9 only */
+#define  SSB_CHIPCO_SLOWCLKCTL_SRC	0x00000007	/* slow clock source mask */
+#define	  SSB_CHIPCO_SLOWCLKCTL_SRC_LPO		0x00000000	/* source of slow clock is LPO */
+#define   SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL	0x00000001	/* source of slow clock is crystal */
+#define	  SSB_CHIPCO_SLOECLKCTL_SRC_PCI		0x00000002	/* source of slow clock is PCI */
+#define  SSB_CHIPCO_SLOWCLKCTL_LPOFREQ	0x00000200	/* LPOFreqSel, 1: 160Khz, 0: 32KHz */
+#define  SSB_CHIPCO_SLOWCLKCTL_LPOPD	0x00000400	/* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
+#define  SSB_CHIPCO_SLOWCLKCTL_FSLOW	0x00000800	/* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
+#define  SSB_CHIPCO_SLOWCLKCTL_IPLL	0x00001000	/* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */
+#define  SSB_CHIPCO_SLOWCLKCTL_ENXTAL	0x00002000	/* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */
+#define  SSB_CHIPCO_SLOWCLKCTL_XTALPU	0x00004000	/* XtalPU (RO), 1/0: crystal running/disabled */
+#define  SSB_CHIPCO_SLOWCLKCTL_CLKDIV	0xFFFF0000	/* ClockDivider (SlowClk = 1/(4+divisor)) */
+#define  SSB_CHIPCO_SLOWCLKCTL_CLKDIV_SHIFT	16
+#define SSB_CHIPCO_SYSCLKCTL		0x00C0		/* Rev >= 3 only */
+#define	 SSB_CHIPCO_SYSCLKCTL_IDLPEN	0x00000001	/* ILPen: Enable Idle Low Power */
+#define	 SSB_CHIPCO_SYSCLKCTL_ALPEN	0x00000002	/* ALPen: Enable Active Low Power */
+#define	 SSB_CHIPCO_SYSCLKCTL_PLLEN	0x00000004	/* ForcePLLOn */
+#define	 SSB_CHIPCO_SYSCLKCTL_FORCEALP	0x00000008	/* Force ALP (or HT if ALPen is not set */
+#define	 SSB_CHIPCO_SYSCLKCTL_FORCEHT	0x00000010	/* Force HT */
+#define  SSB_CHIPCO_SYSCLKCTL_CLKDIV	0xFFFF0000	/* ClkDiv  (ILP = 1/(4+divisor)) */
+#define  SSB_CHIPCO_SYSCLKCTL_CLKDIV_SHIFT	16
+#define SSB_CHIPCO_CLKSTSTR		0x00C4		/* Rev >= 3 only */
+#define SSB_CHIPCO_PCMCIA_CFG		0x0100
+#define SSB_CHIPCO_PCMCIA_MEMWAIT	0x0104
+#define SSB_CHIPCO_PCMCIA_ATTRWAIT	0x0108
+#define SSB_CHIPCO_PCMCIA_IOWAIT	0x010C
+#define SSB_CHIPCO_IDE_CFG		0x0110
+#define SSB_CHIPCO_IDE_MEMWAIT		0x0114
+#define SSB_CHIPCO_IDE_ATTRWAIT		0x0118
+#define SSB_CHIPCO_IDE_IOWAIT		0x011C
+#define SSB_CHIPCO_PROG_CFG		0x0120
+#define SSB_CHIPCO_PROG_WAITCNT		0x0124
+#define SSB_CHIPCO_FLASH_CFG		0x0128
+#define SSB_CHIPCO_FLASH_WAITCNT	0x012C
+#define SSB_CHIPCO_CLKCTLST		0x01E0 /* Clock control and status (rev >= 20) */
+#define  SSB_CHIPCO_CLKCTLST_FORCEALP	0x00000001 /* Force ALP request */
+#define  SSB_CHIPCO_CLKCTLST_FORCEHT	0x00000002 /* Force HT request */
+#define  SSB_CHIPCO_CLKCTLST_FORCEILP	0x00000004 /* Force ILP request */
+#define  SSB_CHIPCO_CLKCTLST_HAVEALPREQ	0x00000008 /* ALP available request */
+#define  SSB_CHIPCO_CLKCTLST_HAVEHTREQ	0x00000010 /* HT available request */
+#define  SSB_CHIPCO_CLKCTLST_HWCROFF	0x00000020 /* Force HW clock request off */
+#define  SSB_CHIPCO_CLKCTLST_HAVEALP	0x00010000 /* ALP available */
+#define  SSB_CHIPCO_CLKCTLST_HAVEHT	0x00020000 /* HT available */
+#define  SSB_CHIPCO_CLKCTLST_4328A0_HAVEHT	0x00010000 /* 4328a0 has reversed bits */
+#define  SSB_CHIPCO_CLKCTLST_4328A0_HAVEALP	0x00020000 /* 4328a0 has reversed bits */
+#define SSB_CHIPCO_HW_WORKAROUND	0x01E4 /* Hardware workaround (rev >= 20) */
+#define SSB_CHIPCO_UART0_DATA		0x0300
+#define SSB_CHIPCO_UART0_IMR		0x0304
+#define SSB_CHIPCO_UART0_FCR		0x0308
+#define SSB_CHIPCO_UART0_LCR		0x030C
+#define SSB_CHIPCO_UART0_MCR		0x0310
+#define SSB_CHIPCO_UART0_LSR		0x0314
+#define SSB_CHIPCO_UART0_MSR		0x0318
+#define SSB_CHIPCO_UART0_SCRATCH	0x031C
+#define SSB_CHIPCO_UART1_DATA		0x0400
+#define SSB_CHIPCO_UART1_IMR		0x0404
+#define SSB_CHIPCO_UART1_FCR		0x0408
+#define SSB_CHIPCO_UART1_LCR		0x040C
+#define SSB_CHIPCO_UART1_MCR		0x0410
+#define SSB_CHIPCO_UART1_LSR		0x0414
+#define SSB_CHIPCO_UART1_MSR		0x0418
+#define SSB_CHIPCO_UART1_SCRATCH	0x041C
+/* PMU registers (rev >= 20) */
+#define SSB_CHIPCO_PMU_CTL			0x0600 /* PMU control */
+#define  SSB_CHIPCO_PMU_CTL_ILP_DIV		0xFFFF0000 /* ILP div mask */
+#define  SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT	16
+#define  SSB_CHIPCO_PMU_CTL_NOILPONW		0x00000200 /* No ILP on wait */
+#define  SSB_CHIPCO_PMU_CTL_HTREQEN		0x00000100 /* HT req enable */
+#define  SSB_CHIPCO_PMU_CTL_ALPREQEN		0x00000080 /* ALP req enable */
+#define  SSB_CHIPCO_PMU_CTL_XTALFREQ		0x0000007C /* Crystal freq */
+#define  SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT	2
+#define  SSB_CHIPCO_PMU_CTL_ILPDIVEN		0x00000002 /* ILP div enable */
+#define  SSB_CHIPCO_PMU_CTL_LPOSEL		0x00000001 /* LPO sel */
+#define SSB_CHIPCO_PMU_CAP			0x0604 /* PMU capabilities */
+#define  SSB_CHIPCO_PMU_CAP_REVISION		0x000000FF /* Revision mask */
+#define SSB_CHIPCO_PMU_STAT			0x0608 /* PMU status */
+#define  SSB_CHIPCO_PMU_STAT_INTPEND		0x00000040 /* Interrupt pending */
+#define  SSB_CHIPCO_PMU_STAT_SBCLKST		0x00000030 /* Backplane clock status? */
+#define  SSB_CHIPCO_PMU_STAT_HAVEALP		0x00000008 /* ALP available */
+#define  SSB_CHIPCO_PMU_STAT_HAVEHT		0x00000004 /* HT available */
+#define  SSB_CHIPCO_PMU_STAT_RESINIT		0x00000003 /* Res init */
+#define SSB_CHIPCO_PMU_RES_STAT			0x060C /* PMU res status */
+#define SSB_CHIPCO_PMU_RES_PEND			0x0610 /* PMU res pending */
+#define SSB_CHIPCO_PMU_TIMER			0x0614 /* PMU timer */
+#define SSB_CHIPCO_PMU_MINRES_MSK		0x0618 /* PMU min res mask */
+#define SSB_CHIPCO_PMU_MAXRES_MSK		0x061C /* PMU max res mask */
+#define SSB_CHIPCO_PMU_RES_TABSEL		0x0620 /* PMU res table sel */
+#define SSB_CHIPCO_PMU_RES_DEPMSK		0x0624 /* PMU res dep mask */
+#define SSB_CHIPCO_PMU_RES_UPDNTM		0x0628 /* PMU res updown timer */
+#define SSB_CHIPCO_PMU_RES_TIMER		0x062C /* PMU res timer */
+#define SSB_CHIPCO_PMU_CLKSTRETCH		0x0630 /* PMU clockstretch */
+#define SSB_CHIPCO_PMU_WATCHDOG			0x0634 /* PMU watchdog */
+#define SSB_CHIPCO_PMU_RES_REQTS		0x0640 /* PMU res req timer sel */
+#define SSB_CHIPCO_PMU_RES_REQT			0x0644 /* PMU res req timer */
+#define SSB_CHIPCO_PMU_RES_REQM			0x0648 /* PMU res req mask */
+#define SSB_CHIPCO_CHIPCTL_ADDR			0x0650
+#define SSB_CHIPCO_CHIPCTL_DATA			0x0654
+#define SSB_CHIPCO_REGCTL_ADDR			0x0658
+#define SSB_CHIPCO_REGCTL_DATA			0x065C
+#define SSB_CHIPCO_PLLCTL_ADDR			0x0660
+#define SSB_CHIPCO_PLLCTL_DATA			0x0664
+
+
+
+/** PMU PLL registers */
+
+/* PMU rev 0 PLL registers */
+#define SSB_PMU0_PLLCTL0			0
+#define  SSB_PMU0_PLLCTL0_PDIV_MSK		0x00000001
+#define  SSB_PMU0_PLLCTL0_PDIV_FREQ		25000 /* kHz */
+#define SSB_PMU0_PLLCTL1			1
+#define  SSB_PMU0_PLLCTL1_WILD_IMSK		0xF0000000 /* Wild int mask (low nibble) */
+#define  SSB_PMU0_PLLCTL1_WILD_IMSK_SHIFT	28
+#define  SSB_PMU0_PLLCTL1_WILD_FMSK		0x0FFFFF00 /* Wild frac mask */
+#define  SSB_PMU0_PLLCTL1_WILD_FMSK_SHIFT	8
+#define  SSB_PMU0_PLLCTL1_STOPMOD		0x00000040 /* Stop mod */
+#define SSB_PMU0_PLLCTL2			2
+#define  SSB_PMU0_PLLCTL2_WILD_IMSKHI		0x0000000F /* Wild int mask (high nibble) */
+#define  SSB_PMU0_PLLCTL2_WILD_IMSKHI_SHIFT	0
+
+/* PMU rev 1 PLL registers */
+#define SSB_PMU1_PLLCTL0			0
+#define  SSB_PMU1_PLLCTL0_P1DIV			0x00F00000 /* P1 div */
+#define  SSB_PMU1_PLLCTL0_P1DIV_SHIFT		20
+#define  SSB_PMU1_PLLCTL0_P2DIV			0x0F000000 /* P2 div */
+#define  SSB_PMU1_PLLCTL0_P2DIV_SHIFT		24
+#define SSB_PMU1_PLLCTL1			1
+#define  SSB_PMU1_PLLCTL1_M1DIV			0x000000FF /* M1 div */
+#define  SSB_PMU1_PLLCTL1_M1DIV_SHIFT		0
+#define  SSB_PMU1_PLLCTL1_M2DIV			0x0000FF00 /* M2 div */
+#define  SSB_PMU1_PLLCTL1_M2DIV_SHIFT		8
+#define  SSB_PMU1_PLLCTL1_M3DIV			0x00FF0000 /* M3 div */
+#define  SSB_PMU1_PLLCTL1_M3DIV_SHIFT		16
+#define  SSB_PMU1_PLLCTL1_M4DIV			0xFF000000 /* M4 div */
+#define  SSB_PMU1_PLLCTL1_M4DIV_SHIFT		24
+#define SSB_PMU1_PLLCTL2			2
+#define  SSB_PMU1_PLLCTL2_M5DIV			0x000000FF /* M5 div */
+#define  SSB_PMU1_PLLCTL2_M5DIV_SHIFT		0
+#define  SSB_PMU1_PLLCTL2_M6DIV			0x0000FF00 /* M6 div */
+#define  SSB_PMU1_PLLCTL2_M6DIV_SHIFT		8
+#define  SSB_PMU1_PLLCTL2_NDIVMODE		0x000E0000 /* NDIV mode */
+#define  SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT	17
+#define  SSB_PMU1_PLLCTL2_NDIVINT		0x1FF00000 /* NDIV int */
+#define  SSB_PMU1_PLLCTL2_NDIVINT_SHIFT		20
+#define SSB_PMU1_PLLCTL3			3
+#define  SSB_PMU1_PLLCTL3_NDIVFRAC		0x00FFFFFF /* NDIV frac */
+#define  SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT	0
+#define SSB_PMU1_PLLCTL4			4
+#define SSB_PMU1_PLLCTL5			5
+#define  SSB_PMU1_PLLCTL5_CLKDRV		0xFFFFFF00 /* clk drv */
+#define  SSB_PMU1_PLLCTL5_CLKDRV_SHIFT		8
+
+/* BCM4312 PLL resource numbers. */
+#define SSB_PMURES_4312_SWITCHER_BURST		0
+#define SSB_PMURES_4312_SWITCHER_PWM    	1
+#define SSB_PMURES_4312_PA_REF_LDO		2
+#define SSB_PMURES_4312_CORE_LDO_BURST		3
+#define SSB_PMURES_4312_CORE_LDO_PWM		4
+#define SSB_PMURES_4312_RADIO_LDO		5
+#define SSB_PMURES_4312_ILP_REQUEST		6
+#define SSB_PMURES_4312_BG_FILTBYP		7
+#define SSB_PMURES_4312_TX_FILTBYP		8
+#define SSB_PMURES_4312_RX_FILTBYP		9
+#define SSB_PMURES_4312_XTAL_PU			10
+#define SSB_PMURES_4312_ALP_AVAIL		11
+#define SSB_PMURES_4312_BB_PLL_FILTBYP		12
+#define SSB_PMURES_4312_RF_PLL_FILTBYP		13
+#define SSB_PMURES_4312_HT_AVAIL		14
+
+/* BCM4325 PLL resource numbers. */
+#define SSB_PMURES_4325_BUCK_BOOST_BURST	0
+#define SSB_PMURES_4325_CBUCK_BURST		1
+#define SSB_PMURES_4325_CBUCK_PWM		2
+#define SSB_PMURES_4325_CLDO_CBUCK_BURST	3
+#define SSB_PMURES_4325_CLDO_CBUCK_PWM		4
+#define SSB_PMURES_4325_BUCK_BOOST_PWM		5
+#define SSB_PMURES_4325_ILP_REQUEST		6
+#define SSB_PMURES_4325_ABUCK_BURST		7
+#define SSB_PMURES_4325_ABUCK_PWM		8
+#define SSB_PMURES_4325_LNLDO1_PU		9
+#define SSB_PMURES_4325_LNLDO2_PU		10
+#define SSB_PMURES_4325_LNLDO3_PU		11
+#define SSB_PMURES_4325_LNLDO4_PU		12
+#define SSB_PMURES_4325_XTAL_PU			13
+#define SSB_PMURES_4325_ALP_AVAIL		14
+#define SSB_PMURES_4325_RX_PWRSW_PU		15
+#define SSB_PMURES_4325_TX_PWRSW_PU		16
+#define SSB_PMURES_4325_RFPLL_PWRSW_PU		17
+#define SSB_PMURES_4325_LOGEN_PWRSW_PU		18
+#define SSB_PMURES_4325_AFE_PWRSW_PU		19
+#define SSB_PMURES_4325_BBPLL_PWRSW_PU		20
+#define SSB_PMURES_4325_HT_AVAIL		21
+
+/* BCM4328 PLL resource numbers. */
+#define SSB_PMURES_4328_EXT_SWITCHER_PWM	0
+#define SSB_PMURES_4328_BB_SWITCHER_PWM		1
+#define SSB_PMURES_4328_BB_SWITCHER_BURST	2
+#define SSB_PMURES_4328_BB_EXT_SWITCHER_BURST	3
+#define SSB_PMURES_4328_ILP_REQUEST		4
+#define SSB_PMURES_4328_RADIO_SWITCHER_PWM	5
+#define SSB_PMURES_4328_RADIO_SWITCHER_BURST	6
+#define SSB_PMURES_4328_ROM_SWITCH		7
+#define SSB_PMURES_4328_PA_REF_LDO		8
+#define SSB_PMURES_4328_RADIO_LDO		9
+#define SSB_PMURES_4328_AFE_LDO			10
+#define SSB_PMURES_4328_PLL_LDO			11
+#define SSB_PMURES_4328_BG_FILTBYP		12
+#define SSB_PMURES_4328_TX_FILTBYP		13
+#define SSB_PMURES_4328_RX_FILTBYP		14
+#define SSB_PMURES_4328_XTAL_PU			15
+#define SSB_PMURES_4328_XTAL_EN			16
+#define SSB_PMURES_4328_BB_PLL_FILTBYP		17
+#define SSB_PMURES_4328_RF_PLL_FILTBYP		18
+#define SSB_PMURES_4328_BB_PLL_PU		19
+
+/* BCM5354 PLL resource numbers. */
+#define SSB_PMURES_5354_EXT_SWITCHER_PWM	0
+#define SSB_PMURES_5354_BB_SWITCHER_PWM		1
+#define SSB_PMURES_5354_BB_SWITCHER_BURST	2
+#define SSB_PMURES_5354_BB_EXT_SWITCHER_BURST	3
+#define SSB_PMURES_5354_ILP_REQUEST		4
+#define SSB_PMURES_5354_RADIO_SWITCHER_PWM	5
+#define SSB_PMURES_5354_RADIO_SWITCHER_BURST	6
+#define SSB_PMURES_5354_ROM_SWITCH		7
+#define SSB_PMURES_5354_PA_REF_LDO		8
+#define SSB_PMURES_5354_RADIO_LDO		9
+#define SSB_PMURES_5354_AFE_LDO			10
+#define SSB_PMURES_5354_PLL_LDO			11
+#define SSB_PMURES_5354_BG_FILTBYP		12
+#define SSB_PMURES_5354_TX_FILTBYP		13
+#define SSB_PMURES_5354_RX_FILTBYP		14
+#define SSB_PMURES_5354_XTAL_PU			15
+#define SSB_PMURES_5354_XTAL_EN			16
+#define SSB_PMURES_5354_BB_PLL_FILTBYP		17
+#define SSB_PMURES_5354_RF_PLL_FILTBYP		18
+#define SSB_PMURES_5354_BB_PLL_PU		19
+
+
+
+/** Chip specific Chip-Status register contents. */
+#define SSB_CHIPCO_CHST_4322_SPROM_EXISTS	0x00000040 /* SPROM present */
+#define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL	0x00000003
+#define SSB_CHIPCO_CHST_4325_DEFCIS_SEL		0 /* OTP is powered up, use def. CIS, no SPROM */
+#define SSB_CHIPCO_CHST_4325_SPROM_SEL		1 /* OTP is powered up, SPROM is present */
+#define SSB_CHIPCO_CHST_4325_OTP_SEL		2 /* OTP is powered up, no SPROM */
+#define SSB_CHIPCO_CHST_4325_OTP_PWRDN		3 /* OTP is powered down, SPROM is present */
+#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE	0x00000004
+#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE_SHIFT  2
+#define SSB_CHIPCO_CHST_4325_RCAL_VALID		0x00000008
+#define SSB_CHIPCO_CHST_4325_RCAL_VALID_SHIFT	3
+#define SSB_CHIPCO_CHST_4325_RCAL_VALUE		0x000001F0
+#define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT	4
+#define SSB_CHIPCO_CHST_4325_PMUTOP_2B 		0x00000200 /* 1 for 2b, 0 for to 2a */
+
+/** Macros to determine SPROM presence based on Chip-Status register. */
+#define SSB_CHIPCO_CHST_4312_SPROM_PRESENT(status) \
+	((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
+		SSB_CHIPCO_CHST_4325_OTP_SEL)
+#define SSB_CHIPCO_CHST_4322_SPROM_PRESENT(status) \
+	(status & SSB_CHIPCO_CHST_4322_SPROM_EXISTS)
+#define SSB_CHIPCO_CHST_4325_SPROM_PRESENT(status) \
+	(((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
+		SSB_CHIPCO_CHST_4325_DEFCIS_SEL) && \
+	 ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
+		SSB_CHIPCO_CHST_4325_OTP_SEL))
+
+
+
+/** Clockcontrol masks and values **/
+
+/* SSB_CHIPCO_CLOCK_N */
+#define	SSB_CHIPCO_CLK_N1		0x0000003F	/* n1 control */
+#define	SSB_CHIPCO_CLK_N2		0x00003F00	/* n2 control */
+#define	SSB_CHIPCO_CLK_N2_SHIFT		8
+#define	SSB_CHIPCO_CLK_PLLC		0x000F0000	/* pll control */
+#define	SSB_CHIPCO_CLK_PLLC_SHIFT	16
+
+/* SSB_CHIPCO_CLOCK_SB/PCI/UART */
+#define	SSB_CHIPCO_CLK_M1		0x0000003F	/* m1 control */
+#define	SSB_CHIPCO_CLK_M2		0x00003F00	/* m2 control */
+#define	SSB_CHIPCO_CLK_M2_SHIFT		8
+#define	SSB_CHIPCO_CLK_M3		0x003F0000	/* m3 control */
+#define	SSB_CHIPCO_CLK_M3_SHIFT		16
+#define	SSB_CHIPCO_CLK_MC		0x1F000000	/* mux control */
+#define	SSB_CHIPCO_CLK_MC_SHIFT		24
+
+/* N3M Clock control magic field values */
+#define	SSB_CHIPCO_CLK_F6_2		0x02		/* A factor of 2 in */
+#define	SSB_CHIPCO_CLK_F6_3		0x03		/* 6-bit fields like */
+#define	SSB_CHIPCO_CLK_F6_4		0x05		/* N1, M1 or M3 */
+#define	SSB_CHIPCO_CLK_F6_5		0x09
+#define	SSB_CHIPCO_CLK_F6_6		0x11
+#define	SSB_CHIPCO_CLK_F6_7		0x21
+
+#define	SSB_CHIPCO_CLK_F5_BIAS		5		/* 5-bit fields get this added */
+
+#define	SSB_CHIPCO_CLK_MC_BYPASS	0x08
+#define	SSB_CHIPCO_CLK_MC_M1		0x04
+#define	SSB_CHIPCO_CLK_MC_M1M2		0x02
+#define	SSB_CHIPCO_CLK_MC_M1M2M3	0x01
+#define	SSB_CHIPCO_CLK_MC_M1M3		0x11
+
+/* Type 2 Clock control magic field values */
+#define	SSB_CHIPCO_CLK_T2_BIAS		2		/* n1, n2, m1 & m3 bias */
+#define	SSB_CHIPCO_CLK_T2M2_BIAS	3		/* m2 bias */
+
+#define	SSB_CHIPCO_CLK_T2MC_M1BYP	1
+#define	SSB_CHIPCO_CLK_T2MC_M2BYP	2
+#define	SSB_CHIPCO_CLK_T2MC_M3BYP	4
+
+/* Type 6 Clock control magic field values */
+#define	SSB_CHIPCO_CLK_T6_MMASK		1		/* bits of interest in m */
+#define	SSB_CHIPCO_CLK_T6_M0		120000000	/* sb clock for m = 0 */
+#define	SSB_CHIPCO_CLK_T6_M1		100000000	/* sb clock for m = 1 */
+#define	SSB_CHIPCO_CLK_SB2MIPS_T6(sb)	(2 * (sb))
+
+/* Common clock base */
+#define	SSB_CHIPCO_CLK_BASE1		24000000	/* Half the clock freq */
+#define SSB_CHIPCO_CLK_BASE2		12500000	/* Alternate crystal on some PLL's */
+
+/* Clock control values for 200Mhz in 5350 */
+#define	SSB_CHIPCO_CLK_5350_N		0x0311
+#define	SSB_CHIPCO_CLK_5350_M		0x04020009
+
+
+/** Bits in the config registers **/
+
+#define	SSB_CHIPCO_CFG_EN		0x0001		/* Enable */
+#define	SSB_CHIPCO_CFG_EXTM		0x000E		/* Extif Mode */
+#define	 SSB_CHIPCO_CFG_EXTM_ASYNC	0x0002		/* Async/Parallel flash */
+#define	 SSB_CHIPCO_CFG_EXTM_SYNC	0x0004		/* Synchronous */
+#define	 SSB_CHIPCO_CFG_EXTM_PCMCIA	0x0008		/* PCMCIA */
+#define	 SSB_CHIPCO_CFG_EXTM_IDE	0x000A		/* IDE */
+#define	SSB_CHIPCO_CFG_DS16		0x0010		/* Data size, 0=8bit, 1=16bit */
+#define	SSB_CHIPCO_CFG_CLKDIV		0x0060		/* Sync: Clock divisor */
+#define	SSB_CHIPCO_CFG_CLKEN		0x0080		/* Sync: Clock enable */
+#define	SSB_CHIPCO_CFG_BSTRO		0x0100		/* Sync: Size/Bytestrobe */
+
+
+/** Flash-specific control/status values */
+
+/* flashcontrol opcodes for ST flashes */
+#define SSB_CHIPCO_FLASHCTL_ST_WREN	0x0006		/* Write Enable */
+#define SSB_CHIPCO_FLASHCTL_ST_WRDIS	0x0004		/* Write Disable */
+#define SSB_CHIPCO_FLASHCTL_ST_RDSR	0x0105		/* Read Status Register */
+#define SSB_CHIPCO_FLASHCTL_ST_WRSR	0x0101		/* Write Status Register */
+#define SSB_CHIPCO_FLASHCTL_ST_READ	0x0303		/* Read Data Bytes */
+#define SSB_CHIPCO_FLASHCTL_ST_PP	0x0302		/* Page Program */
+#define SSB_CHIPCO_FLASHCTL_ST_SE	0x02D8		/* Sector Erase */
+#define SSB_CHIPCO_FLASHCTL_ST_BE	0x00C7		/* Bulk Erase */
+#define SSB_CHIPCO_FLASHCTL_ST_DP	0x00B9		/* Deep Power-down */
+#define SSB_CHIPCO_FLASHCTL_ST_RSIG	0x03AB		/* Read Electronic Signature */
+
+/* Status register bits for ST flashes */
+#define SSB_CHIPCO_FLASHSTA_ST_WIP	0x01		/* Write In Progress */
+#define SSB_CHIPCO_FLASHSTA_ST_WEL	0x02		/* Write Enable Latch */
+#define SSB_CHIPCO_FLASHSTA_ST_BP	0x1C		/* Block Protect */
+#define SSB_CHIPCO_FLASHSTA_ST_BP_SHIFT	2
+#define SSB_CHIPCO_FLASHSTA_ST_SRWD	0x80		/* Status Register Write Disable */
+
+/* flashcontrol opcodes for Atmel flashes */
+#define SSB_CHIPCO_FLASHCTL_AT_READ		0x07E8
+#define SSB_CHIPCO_FLASHCTL_AT_PAGE_READ	0x07D2
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_READ	/* FIXME */
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_READ	/* FIXME */
+#define SSB_CHIPCO_FLASHCTL_AT_STATUS		0x01D7
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_WRITE	0x0384
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_WRITE	0x0387
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_ERASE_PRGM	0x0283	/* Erase program */
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_ERASE_PRGM	0x0286	/* Erase program */
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_PROGRAM	0x0288
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_PROGRAM	0x0289
+#define SSB_CHIPCO_FLASHCTL_AT_PAGE_ERASE	0x0281
+#define SSB_CHIPCO_FLASHCTL_AT_BLOCK_ERASE	0x0250
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_WRER_PRGM	0x0382	/* Write erase program */
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_WRER_PRGM	0x0385	/* Write erase program */
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_LOAD	0x0253
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_LOAD	0x0255
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_COMPARE	0x0260
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_COMPARE	0x0261
+#define SSB_CHIPCO_FLASHCTL_AT_BUF1_REPROGRAM	0x0258
+#define SSB_CHIPCO_FLASHCTL_AT_BUF2_REPROGRAM	0x0259
+
+/* Status register bits for Atmel flashes */
+#define SSB_CHIPCO_FLASHSTA_AT_READY	0x80
+#define SSB_CHIPCO_FLASHSTA_AT_MISMATCH	0x40
+#define SSB_CHIPCO_FLASHSTA_AT_ID	0x38
+#define SSB_CHIPCO_FLASHSTA_AT_ID_SHIFT	3
+
+
+/** OTP **/
+
+/* OTP regions */
+#define	SSB_CHIPCO_OTP_HW_REGION	SSB_CHIPCO_OTPS_HW_PROTECT
+#define	SSB_CHIPCO_OTP_SW_REGION	SSB_CHIPCO_OTPS_SW_PROTECT
+#define	SSB_CHIPCO_OTP_CID_REGION	SSB_CHIPCO_OTPS_CID_PROTECT
+
+/* OTP regions (Byte offsets from otp size) */
+#define	SSB_CHIPCO_OTP_SWLIM_OFF	(-8)
+#define	SSB_CHIPCO_OTP_CIDBASE_OFF	0
+#define	SSB_CHIPCO_OTP_CIDLIM_OFF	8
+
+/* Predefined OTP words (Word offset from otp size) */
+#define	SSB_CHIPCO_OTP_BOUNDARY_OFF	(-4)
+#define	SSB_CHIPCO_OTP_HWSIGN_OFF	(-3)
+#define	SSB_CHIPCO_OTP_SWSIGN_OFF	(-2)
+#define	SSB_CHIPCO_OTP_CIDSIGN_OFF	(-1)
+
+#define	SSB_CHIPCO_OTP_CID_OFF		0
+#define	SSB_CHIPCO_OTP_PKG_OFF		1
+#define	SSB_CHIPCO_OTP_FID_OFF		2
+#define	SSB_CHIPCO_OTP_RSV_OFF		3
+#define	SSB_CHIPCO_OTP_LIM_OFF		4
+
+#define	SSB_CHIPCO_OTP_SIGNATURE	0x578A
+#define	SSB_CHIPCO_OTP_MAGIC		0x4E56
+
+
+struct ssb_device;
+struct ssb_serial_port;
+
+/* Data for the PMU, if available.
+ * Check availability with ((struct ssb_chipcommon)->capabilities & SSB_CHIPCO_CAP_PMU)
+ */
+struct ssb_chipcommon_pmu {
+	u8 rev;			/* PMU revision */
+	u32 crystalfreq;	/* The active crystal frequency (in kHz) */
+};
+
+struct ssb_chipcommon {
+	struct ssb_device *dev;
+	u32 capabilities;
+	u32 status;
+	/* Fast Powerup Delay constant */
+	u16 fast_pwrup_delay;
+	struct ssb_chipcommon_pmu pmu;
+};
+
+static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
+{
+	return (cc->dev != NULL);
+}
+
+/* Register access */
+#define chipco_read32(cc, offset)	ssb_read32((cc)->dev, offset)
+#define chipco_write32(cc, offset, val)	ssb_write32((cc)->dev, offset, val)
+
+#define chipco_mask32(cc, offset, mask) \
+		chipco_write32(cc, offset, chipco_read32(cc, offset) & (mask))
+#define chipco_set32(cc, offset, set) \
+		chipco_write32(cc, offset, chipco_read32(cc, offset) | (set))
+#define chipco_maskset32(cc, offset, mask, set) \
+		chipco_write32(cc, offset, (chipco_read32(cc, offset) & (mask)) | (set))
+
+extern void ssb_chipcommon_init(struct ssb_chipcommon *cc);
+
+extern void ssb_chipco_suspend(struct ssb_chipcommon *cc);
+extern void ssb_chipco_resume(struct ssb_chipcommon *cc);
+
+extern void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
+                                    u32 *plltype, u32 *n, u32 *m);
+extern void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
+					u32 *plltype, u32 *n, u32 *m);
+extern void ssb_chipco_timing_init(struct ssb_chipcommon *cc,
+				   unsigned long ns_per_cycle);
+
+enum ssb_clkmode {
+	SSB_CLKMODE_SLOW,
+	SSB_CLKMODE_FAST,
+	SSB_CLKMODE_DYNAMIC,
+};
+
+extern void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
+				     enum ssb_clkmode mode);
+
+extern void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc,
+					  u32 ticks);
+
+void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value);
+
+u32 ssb_chipco_irq_status(struct ssb_chipcommon *cc, u32 mask);
+
+/* Chipcommon GPIO pin access. */
+u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc, u32 mask);
+u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value);
+u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value);
+u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value);
+u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value);
+u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value);
+
+#ifdef CONFIG_SSB_SERIAL
+extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
+				  struct ssb_serial_port *ports);
+#endif /* CONFIG_SSB_SERIAL */
+
+/* PMU support */
+extern void ssb_pmu_init(struct ssb_chipcommon *cc);
+
+enum ssb_pmu_ldo_volt_id {
+	LDO_PAREF = 0,
+	LDO_VOLT1,
+	LDO_VOLT2,
+	LDO_VOLT3,
+};
+
+void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
+			     enum ssb_pmu_ldo_volt_id id, u32 voltage);
+void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on);
+
+#endif /* LINUX_SSB_CHIPCO_H_ */
diff --git a/include/linux/ssb/ssb_driver_extif.h b/include/linux/ssb/ssb_driver_extif.h
new file mode 100644
index 00000000..91161f0a
--- /dev/null
+++ b/include/linux/ssb/ssb_driver_extif.h
@@ -0,0 +1,214 @@
+/*
+ * Hardware-specific External Interface I/O core definitions
+ * for the BCM47xx family of SiliconBackplane-based chips.
+ *
+ * The External Interface core supports a total of three external chip selects
+ * supporting external interfaces. One of the external chip selects is
+ * used for Flash, one is used for PCMCIA, and the other may be
+ * programmed to support either a synchronous interface or an
+ * asynchronous interface. The asynchronous interface can be used to
+ * support external devices such as UARTs and the BCM2019 Bluetooth
+ * baseband processor.
+ * The external interface core also contains 2 on-chip 16550 UARTs, clock
+ * frequency control, a watchdog interrupt timer, and a GPIO interface.
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, Michael Buesch
+ *
+ * Licensed under the GPL version 2. See COPYING for details.
+ */
+#ifndef LINUX_SSB_EXTIFCORE_H_
+#define LINUX_SSB_EXTIFCORE_H_
+
+/* external interface address space */
+#define	SSB_EXTIF_PCMCIA_MEMBASE(x)	(x)
+#define	SSB_EXTIF_PCMCIA_IOBASE(x)	((x) + 0x100000)
+#define	SSB_EXTIF_PCMCIA_CFGBASE(x)	((x) + 0x200000)
+#define	SSB_EXTIF_CFGIF_BASE(x)		((x) + 0x800000)
+#define	SSB_EXTIF_FLASH_BASE(x)		((x) + 0xc00000)
+
+#define SSB_EXTIF_NR_GPIOOUT		5
+/* GPIO NOTE:
+ * The multiple instances of output and output enable registers
+ * are present to allow driver software for multiple cores to control
+ * gpio outputs without needing to share a single register pair.
+ * Use the following helper macro to get a register offset value.
+ */
+#define SSB_EXTIF_GPIO_OUT(index)	({		\
+	BUILD_BUG_ON(index >= SSB_EXTIF_NR_GPIOOUT);	\
+	SSB_EXTIF_GPIO_OUT_BASE + ((index) * 8);	\
+					})
+#define SSB_EXTIF_GPIO_OUTEN(index)	({		\
+	BUILD_BUG_ON(index >= SSB_EXTIF_NR_GPIOOUT);	\
+	SSB_EXTIF_GPIO_OUTEN_BASE + ((index) * 8);	\
+					})
+
+/** EXTIF core registers **/
+
+#define SSB_EXTIF_CTL			0x0000
+#define  SSB_EXTIF_CTL_UARTEN		(1 << 0) /* UART enable */
+#define SSB_EXTIF_EXTSTAT		0x0004
+#define  SSB_EXTIF_EXTSTAT_EMODE	(1 << 0) /* Endian mode (ro) */
+#define  SSB_EXTIF_EXTSTAT_EIRQPIN	(1 << 1) /* External interrupt pin (ro) */
+#define  SSB_EXTIF_EXTSTAT_GPIOIRQPIN	(1 << 2) /* GPIO interrupt pin (ro) */
+#define SSB_EXTIF_PCMCIA_CFG		0x0010
+#define SSB_EXTIF_PCMCIA_MEMWAIT	0x0014
+#define SSB_EXTIF_PCMCIA_ATTRWAIT	0x0018
+#define SSB_EXTIF_PCMCIA_IOWAIT		0x001C
+#define SSB_EXTIF_PROG_CFG		0x0020
+#define SSB_EXTIF_PROG_WAITCNT		0x0024
+#define SSB_EXTIF_FLASH_CFG		0x0028
+#define SSB_EXTIF_FLASH_WAITCNT		0x002C
+#define SSB_EXTIF_WATCHDOG		0x0040
+#define SSB_EXTIF_CLOCK_N		0x0044
+#define SSB_EXTIF_CLOCK_SB		0x0048
+#define SSB_EXTIF_CLOCK_PCI		0x004C
+#define SSB_EXTIF_CLOCK_MII		0x0050
+#define SSB_EXTIF_GPIO_IN		0x0060
+#define SSB_EXTIF_GPIO_OUT_BASE		0x0064
+#define SSB_EXTIF_GPIO_OUTEN_BASE	0x0068
+#define SSB_EXTIF_EJTAG_OUTEN		0x0090
+#define SSB_EXTIF_GPIO_INTPOL		0x0094
+#define SSB_EXTIF_GPIO_INTMASK		0x0098
+#define SSB_EXTIF_UART_DATA		0x0300
+#define SSB_EXTIF_UART_TIMER		0x0310
+#define SSB_EXTIF_UART_FCR		0x0320
+#define SSB_EXTIF_UART_LCR		0x0330
+#define SSB_EXTIF_UART_MCR		0x0340
+#define SSB_EXTIF_UART_LSR		0x0350
+#define SSB_EXTIF_UART_MSR		0x0360
+#define SSB_EXTIF_UART_SCRATCH		0x0370
+
+
+
+
+/* pcmcia/prog/flash_config */
+#define	SSB_EXTCFG_EN			(1 << 0)	/* enable */
+#define	SSB_EXTCFG_MODE			0xE		/* mode */
+#define	SSB_EXTCFG_MODE_SHIFT		1
+#define	 SSB_EXTCFG_MODE_FLASH		0x0		/* flash/asynchronous mode */
+#define	 SSB_EXTCFG_MODE_SYNC		0x2		/* synchronous mode */
+#define	 SSB_EXTCFG_MODE_PCMCIA		0x4		/* pcmcia mode */
+#define	SSB_EXTCFG_DS16			(1 << 4)	/* destsize:  0=8bit, 1=16bit */
+#define	SSB_EXTCFG_BSWAP		(1 << 5)	/* byteswap */
+#define	SSB_EXTCFG_CLKDIV		0xC0		/* clock divider */
+#define	SSB_EXTCFG_CLKDIV_SHIFT		6
+#define	 SSB_EXTCFG_CLKDIV_2		0x0		/* backplane/2 */
+#define	 SSB_EXTCFG_CLKDIV_3		0x40		/* backplane/3 */
+#define	 SSB_EXTCFG_CLKDIV_4		0x80		/* backplane/4 */
+#define	SSB_EXTCFG_CLKEN		(1 << 8)	/* clock enable */
+#define	SSB_EXTCFG_STROBE		(1 << 9)	/* size/bytestrobe (synch only) */
+
+/* pcmcia_memwait */
+#define	SSB_PCMCIA_MEMW_0		0x0000003F	/* waitcount0 */
+#define	SSB_PCMCIA_MEMW_1		0x00001F00	/* waitcount1 */
+#define	SSB_PCMCIA_MEMW_1_SHIFT		8
+#define	SSB_PCMCIA_MEMW_2		0x001F0000	/* waitcount2 */
+#define	SSB_PCMCIA_MEMW_2_SHIFT		16
+#define	SSB_PCMCIA_MEMW_3		0x1F000000	/* waitcount3 */
+#define	SSB_PCMCIA_MEMW_3_SHIFT		24
+
+/* pcmcia_attrwait */
+#define	SSB_PCMCIA_ATTW_0		0x0000003F	/* waitcount0 */
+#define	SSB_PCMCIA_ATTW_1		0x00001F00	/* waitcount1 */
+#define	SSB_PCMCIA_ATTW_1_SHIFT		8
+#define	SSB_PCMCIA_ATTW_2		0x001F0000	/* waitcount2 */
+#define	SSB_PCMCIA_ATTW_2_SHIFT		16
+#define	SSB_PCMCIA_ATTW_3		0x1F000000	/* waitcount3 */
+#define	SSB_PCMCIA_ATTW_3_SHIFT		24
+
+/* pcmcia_iowait */
+#define	SSB_PCMCIA_IOW_0		0x0000003F	/* waitcount0 */
+#define	SSB_PCMCIA_IOW_1		0x00001F00	/* waitcount1 */
+#define	SSB_PCMCIA_IOW_1_SHIFT		8
+#define	SSB_PCMCIA_IOW_2		0x001F0000	/* waitcount2 */
+#define	SSB_PCMCIA_IOW_2_SHIFT		16
+#define	SSB_PCMCIA_IOW_3		0x1F000000	/* waitcount3 */
+#define	SSB_PCMCIA_IOW_3_SHIFT		24
+
+/* prog_waitcount */
+#define	SSB_PROG_WCNT_0			0x0000001F	/* waitcount0 */
+#define	SSB_PROG_WCNT_1			0x00001F00	/* waitcount1 */
+#define	SSB_PROG_WCNT_1_SHIFT		8
+#define	SSB_PROG_WCNT_2			0x001F0000	/* waitcount2 */
+#define	SSB_PROG_WCNT_2_SHIFT		16
+#define	SSB_PROG_WCNT_3			0x1F000000	/* waitcount3 */
+#define	SSB_PROG_WCNT_3_SHIFT		24
+
+#define SSB_PROG_W0			0x0000000C
+#define SSB_PROG_W1			0x00000A00
+#define SSB_PROG_W2			0x00020000
+#define SSB_PROG_W3			0x01000000
+
+/* flash_waitcount */
+#define	SSB_FLASH_WCNT_0		0x0000001F	/* waitcount0 */
+#define	SSB_FLASH_WCNT_1		0x00001F00	/* waitcount1 */
+#define	SSB_FLASH_WCNT_1_SHIFT		8
+#define	SSB_FLASH_WCNT_2		0x001F0000	/* waitcount2 */
+#define	SSB_FLASH_WCNT_2_SHIFT		16
+#define	SSB_FLASH_WCNT_3		0x1F000000	/* waitcount3 */
+#define	SSB_FLASH_WCNT_3_SHIFT		24
+
+/* watchdog */
+#define SSB_EXTIF_WATCHDOG_CLK		48000000	/* Hz */
+
+
+
+#ifdef CONFIG_SSB_DRIVER_EXTIF
+
+struct ssb_extif {
+	struct ssb_device *dev;
+};
+
+static inline bool ssb_extif_available(struct ssb_extif *extif)
+{
+	return (extif->dev != NULL);
+}
+
+extern void ssb_extif_get_clockcontrol(struct ssb_extif *extif,
+			               u32 *plltype, u32 *n, u32 *m);
+
+extern void ssb_extif_timing_init(struct ssb_extif *extif,
+				  unsigned long ns);
+
+extern void ssb_extif_watchdog_timer_set(struct ssb_extif *extif,
+					 u32 ticks);
+
+/* Extif GPIO pin access */
+u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask);
+u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value);
+u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value);
+u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value);
+u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value);
+
+#ifdef CONFIG_SSB_SERIAL
+extern int ssb_extif_serial_init(struct ssb_extif *extif,
+				 struct ssb_serial_port *ports);
+#endif /* CONFIG_SSB_SERIAL */
+
+
+#else /* CONFIG_SSB_DRIVER_EXTIF */
+/* extif disabled */
+
+struct ssb_extif {
+};
+
+static inline bool ssb_extif_available(struct ssb_extif *extif)
+{
+	return 0;
+}
+
+static inline
+void ssb_extif_get_clockcontrol(struct ssb_extif *extif,
+			        u32 *plltype, u32 *n, u32 *m)
+{
+}
+
+static inline
+void ssb_extif_watchdog_timer_set(struct ssb_extif *extif,
+				  u32 ticks)
+{
+}
+
+#endif /* CONFIG_SSB_DRIVER_EXTIF */
+#endif /* LINUX_SSB_EXTIFCORE_H_ */
diff --git a/include/linux/ssb/ssb_driver_gige.h b/include/linux/ssb/ssb_driver_gige.h
new file mode 100644
index 00000000..6b05dcd9
--- /dev/null
+++ b/include/linux/ssb/ssb_driver_gige.h
@@ -0,0 +1,180 @@
+#ifndef LINUX_SSB_DRIVER_GIGE_H_
+#define LINUX_SSB_DRIVER_GIGE_H_
+
+#include <linux/ssb/ssb.h>
+#include <linux/bug.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+
+
+#ifdef CONFIG_SSB_DRIVER_GIGE
+
+
+#define SSB_GIGE_PCIIO			0x0000 /* PCI I/O Registers (1024 bytes) */
+#define SSB_GIGE_RESERVED		0x0400 /* Reserved (1024 bytes) */
+#define SSB_GIGE_PCICFG			0x0800 /* PCI config space (256 bytes) */
+#define SSB_GIGE_SHIM_FLUSHSTAT		0x0C00 /* PCI to OCP: Flush status control (32bit) */
+#define SSB_GIGE_SHIM_FLUSHRDA		0x0C04 /* PCI to OCP: Flush read address (32bit) */
+#define SSB_GIGE_SHIM_FLUSHTO		0x0C08 /* PCI to OCP: Flush timeout counter (32bit) */
+#define SSB_GIGE_SHIM_BARRIER		0x0C0C /* PCI to OCP: Barrier register (32bit) */
+#define SSB_GIGE_SHIM_MAOCPSI		0x0C10 /* PCI to OCP: MaocpSI Control (32bit) */
+#define SSB_GIGE_SHIM_SIOCPMA		0x0C14 /* PCI to OCP: SiocpMa Control (32bit) */
+
+/* TM Status High flags */
+#define SSB_GIGE_TMSHIGH_RGMII		0x00010000 /* Have an RGMII PHY-bus */
+/* TM Status Low flags */
+#define SSB_GIGE_TMSLOW_TXBYPASS	0x00080000 /* TX bypass (no delay) */
+#define SSB_GIGE_TMSLOW_RXBYPASS	0x00100000 /* RX bypass (no delay) */
+#define SSB_GIGE_TMSLOW_DLLEN		0x01000000 /* Enable DLL controls */
+
+/* Boardflags (low) */
+#define SSB_GIGE_BFL_ROBOSWITCH		0x0010
+
+
+#define SSB_GIGE_MEM_RES_NAME		"SSB Broadcom 47xx GigE memory"
+#define SSB_GIGE_IO_RES_NAME		"SSB Broadcom 47xx GigE I/O"
+
+struct ssb_gige {
+	struct ssb_device *dev;
+
+	spinlock_t lock;
+
+	/* True, if the device has an RGMII bus.
+	 * False, if the device has a GMII bus. */
+	bool has_rgmii;
+
+	/* The PCI controller device. */
+	struct pci_controller pci_controller;
+	struct pci_ops pci_ops;
+	struct resource mem_resource;
+	struct resource io_resource;
+};
+
+/* Check whether a PCI device is a SSB Gigabit Ethernet core. */
+extern bool pdev_is_ssb_gige_core(struct pci_dev *pdev);
+
+/* Convert a pci_dev pointer to a ssb_gige pointer. */
+static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev)
+{
+	if (!pdev_is_ssb_gige_core(pdev))
+		return NULL;
+	return container_of(pdev->bus->ops, struct ssb_gige, pci_ops);
+}
+
+/* Returns whether the PHY is connected by an RGMII bus. */
+static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev)
+{
+	struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
+	return (dev ? dev->has_rgmii : 0);
+}
+
+/* Returns whether we have a Roboswitch. */
+static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev)
+{
+	struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
+	if (dev)
+		return !!(dev->dev->bus->sprom.boardflags_lo &
+			  SSB_GIGE_BFL_ROBOSWITCH);
+	return 0;
+}
+
+/* Returns whether we can only do one DMA at once. */
+static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev)
+{
+	struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
+	if (dev)
+		return ((dev->dev->bus->chip_id == 0x4785) &&
+			(dev->dev->bus->chip_rev < 2));
+	return 0;
+}
+
+/* Returns whether we must flush posted writes. */
+static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev)
+{
+	struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
+	if (dev)
+		return (dev->dev->bus->chip_id == 0x4785);
+	return 0;
+}
+
+#ifdef CONFIG_BCM47XX
+#include <asm/mach-bcm47xx/nvram.h>
+/* Get the device MAC address */
+static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+{
+	char buf[20];
+	if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
+		return;
+	nvram_parse_macaddr(buf, macaddr);
+}
+#else
+static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+{
+}
+#endif
+
+extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
+					  struct pci_dev *pdev);
+extern int ssb_gige_map_irq(struct ssb_device *sdev,
+			    const struct pci_dev *pdev);
+
+/* The GigE driver is not a standalone module, because we don't have support
+ * for unregistering the driver. So we could not unload the module anyway. */
+extern int ssb_gige_init(void);
+static inline void ssb_gige_exit(void)
+{
+	/* Currently we can not unregister the GigE driver,
+	 * because we can not unregister the PCI bridge. */
+	BUG();
+}
+
+
+#else /* CONFIG_SSB_DRIVER_GIGE */
+/* Gigabit Ethernet driver disabled */
+
+
+static inline int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
+						 struct pci_dev *pdev)
+{
+	return -ENOSYS;
+}
+static inline int ssb_gige_map_irq(struct ssb_device *sdev,
+				   const struct pci_dev *pdev)
+{
+	return -ENOSYS;
+}
+static inline int ssb_gige_init(void)
+{
+	return 0;
+}
+static inline void ssb_gige_exit(void)
+{
+}
+
+static inline bool pdev_is_ssb_gige_core(struct pci_dev *pdev)
+{
+	return 0;
+}
+static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev)
+{
+	return NULL;
+}
+static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev)
+{
+	return 0;
+}
+static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev)
+{
+	return 0;
+}
+static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev)
+{
+	return 0;
+}
+static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev)
+{
+	return 0;
+}
+
+#endif /* CONFIG_SSB_DRIVER_GIGE */
+#endif /* LINUX_SSB_DRIVER_GIGE_H_ */
diff --git a/include/linux/ssb/ssb_driver_mips.h b/include/linux/ssb/ssb_driver_mips.h
new file mode 100644
index 00000000..5f44e974
--- /dev/null
+++ b/include/linux/ssb/ssb_driver_mips.h
@@ -0,0 +1,46 @@
+#ifndef LINUX_SSB_MIPSCORE_H_
+#define LINUX_SSB_MIPSCORE_H_
+
+#ifdef CONFIG_SSB_DRIVER_MIPS
+
+struct ssb_device;
+
+struct ssb_serial_port {
+	void *regs;
+	unsigned long clockspeed;
+	unsigned int irq;
+	unsigned int baud_base;
+	unsigned int reg_shift;
+};
+
+
+struct ssb_mipscore {
+	struct ssb_device *dev;
+
+	int nr_serial_ports;
+	struct ssb_serial_port serial_ports[4];
+
+	u8 flash_buswidth;
+	u32 flash_window;
+	u32 flash_window_size;
+};
+
+extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
+extern u32 ssb_cpu_clock(struct ssb_mipscore *mcore);
+
+extern unsigned int ssb_mips_irq(struct ssb_device *dev);
+
+
+#else /* CONFIG_SSB_DRIVER_MIPS */
+
+struct ssb_mipscore {
+};
+
+static inline
+void ssb_mipscore_init(struct ssb_mipscore *mcore)
+{
+}
+
+#endif /* CONFIG_SSB_DRIVER_MIPS */
+
+#endif /* LINUX_SSB_MIPSCORE_H_ */
diff --git a/include/linux/ssb/ssb_driver_pci.h b/include/linux/ssb/ssb_driver_pci.h
new file mode 100644
index 00000000..41e330e5
--- /dev/null
+++ b/include/linux/ssb/ssb_driver_pci.h
@@ -0,0 +1,130 @@
+#ifndef LINUX_SSB_PCICORE_H_
+#define LINUX_SSB_PCICORE_H_
+
+#include <linux/types.h>
+
+struct pci_dev;
+
+
+#ifdef CONFIG_SSB_DRIVER_PCICORE
+
+/* PCI core registers. */
+#define SSB_PCICORE_CTL			0x0000	/* PCI Control */
+#define  SSB_PCICORE_CTL_RST_OE		0x00000001 /* PCI_RESET Output Enable */
+#define  SSB_PCICORE_CTL_RST		0x00000002 /* PCI_RESET driven out to pin */
+#define  SSB_PCICORE_CTL_CLK_OE		0x00000004 /* Clock gate Output Enable */
+#define  SSB_PCICORE_CTL_CLK		0x00000008 /* Gate for clock driven out to pin */
+#define SSB_PCICORE_ARBCTL		0x0010	/* PCI Arbiter Control */
+#define  SSB_PCICORE_ARBCTL_INTERN	0x00000001 /* Use internal arbiter */
+#define  SSB_PCICORE_ARBCTL_EXTERN	0x00000002 /* Use external arbiter */
+#define  SSB_PCICORE_ARBCTL_PARKID	0x00000006 /* Mask, selects which agent is parked on an idle bus */
+#define   SSB_PCICORE_ARBCTL_PARKID_LAST	0x00000000 /* Last requestor */
+#define   SSB_PCICORE_ARBCTL_PARKID_4710	0x00000002 /* 4710 */
+#define   SSB_PCICORE_ARBCTL_PARKID_EXT0	0x00000004 /* External requestor 0 */
+#define   SSB_PCICORE_ARBCTL_PARKID_EXT1	0x00000006 /* External requestor 1 */
+#define SSB_PCICORE_ISTAT		0x0020	/* Interrupt status */
+#define  SSB_PCICORE_ISTAT_INTA		0x00000001 /* PCI INTA# */
+#define  SSB_PCICORE_ISTAT_INTB		0x00000002 /* PCI INTB# */
+#define  SSB_PCICORE_ISTAT_SERR		0x00000004 /* PCI SERR# (write to clear) */
+#define  SSB_PCICORE_ISTAT_PERR		0x00000008 /* PCI PERR# (write to clear) */
+#define  SSB_PCICORE_ISTAT_PME		0x00000010 /* PCI PME# */
+#define SSB_PCICORE_IMASK		0x0024	/* Interrupt mask */
+#define  SSB_PCICORE_IMASK_INTA		0x00000001 /* PCI INTA# */
+#define  SSB_PCICORE_IMASK_INTB		0x00000002 /* PCI INTB# */
+#define  SSB_PCICORE_IMASK_SERR		0x00000004 /* PCI SERR# */
+#define  SSB_PCICORE_IMASK_PERR		0x00000008 /* PCI PERR# */
+#define  SSB_PCICORE_IMASK_PME		0x00000010 /* PCI PME# */
+#define SSB_PCICORE_MBOX		0x0028	/* Backplane to PCI Mailbox */
+#define  SSB_PCICORE_MBOX_F0_0		0x00000100 /* PCI function 0, INT 0 */
+#define  SSB_PCICORE_MBOX_F0_1		0x00000200 /* PCI function 0, INT 1 */
+#define  SSB_PCICORE_MBOX_F1_0		0x00000400 /* PCI function 1, INT 0 */
+#define  SSB_PCICORE_MBOX_F1_1		0x00000800 /* PCI function 1, INT 1 */
+#define  SSB_PCICORE_MBOX_F2_0		0x00001000 /* PCI function 2, INT 0 */
+#define  SSB_PCICORE_MBOX_F2_1		0x00002000 /* PCI function 2, INT 1 */
+#define  SSB_PCICORE_MBOX_F3_0		0x00004000 /* PCI function 3, INT 0 */
+#define  SSB_PCICORE_MBOX_F3_1		0x00008000 /* PCI function 3, INT 1 */
+#define SSB_PCICORE_BCAST_ADDR		0x0050	/* Backplane Broadcast Address */
+#define  SSB_PCICORE_BCAST_ADDR_MASK	0x000000FF
+#define SSB_PCICORE_BCAST_DATA		0x0054	/* Backplane Broadcast Data */
+#define SSB_PCICORE_GPIO_IN		0x0060	/* rev >= 2 only */
+#define SSB_PCICORE_GPIO_OUT		0x0064	/* rev >= 2 only */
+#define SSB_PCICORE_GPIO_ENABLE		0x0068	/* rev >= 2 only */
+#define SSB_PCICORE_GPIO_CTL		0x006C	/* rev >= 2 only */
+#define SSB_PCICORE_SBTOPCI0		0x0100	/* Backplane to PCI translation 0 (sbtopci0) */
+#define  SSB_PCICORE_SBTOPCI0_MASK	0xFC000000
+#define SSB_PCICORE_SBTOPCI1		0x0104	/* Backplane to PCI translation 1 (sbtopci1) */
+#define  SSB_PCICORE_SBTOPCI1_MASK	0xFC000000
+#define SSB_PCICORE_SBTOPCI2		0x0108	/* Backplane to PCI translation 2 (sbtopci2) */
+#define  SSB_PCICORE_SBTOPCI2_MASK	0xC0000000
+#define SSB_PCICORE_PCICFG0		0x0400	/* PCI config space 0 (rev >= 8) */
+#define SSB_PCICORE_PCICFG1		0x0500	/* PCI config space 1 (rev >= 8) */
+#define SSB_PCICORE_PCICFG2		0x0600	/* PCI config space 2 (rev >= 8) */
+#define SSB_PCICORE_PCICFG3		0x0700	/* PCI config space 3 (rev >= 8) */
+#define SSB_PCICORE_SPROM(wordoffset)	(0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */
+
+/* SBtoPCIx */
+#define SSB_PCICORE_SBTOPCI_MEM		0x00000000
+#define SSB_PCICORE_SBTOPCI_IO		0x00000001
+#define SSB_PCICORE_SBTOPCI_CFG0	0x00000002
+#define SSB_PCICORE_SBTOPCI_CFG1	0x00000003
+#define SSB_PCICORE_SBTOPCI_PREF	0x00000004 /* Prefetch enable */
+#define SSB_PCICORE_SBTOPCI_BURST	0x00000008 /* Burst enable */
+#define SSB_PCICORE_SBTOPCI_MRM		0x00000020 /* Memory Read Multiple */
+#define SSB_PCICORE_SBTOPCI_RC		0x00000030 /* Read Command mask (rev >= 11) */
+#define  SSB_PCICORE_SBTOPCI_RC_READ	0x00000000 /* Memory read */
+#define  SSB_PCICORE_SBTOPCI_RC_READL	0x00000010 /* Memory read line */
+#define  SSB_PCICORE_SBTOPCI_RC_READM	0x00000020 /* Memory read multiple */
+
+
+/* PCIcore specific boardflags */
+#define SSB_PCICORE_BFL_NOPCI		0x00000400 /* Board leaves PCI floating */
+
+
+struct ssb_pcicore {
+	struct ssb_device *dev;
+	u8 setup_done:1;
+	u8 hostmode:1;
+	u8 cardbusmode:1;
+};
+
+extern void ssb_pcicore_init(struct ssb_pcicore *pc);
+
+/* Enable IRQ routing for a specific device */
+extern int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
+					  struct ssb_device *dev);
+
+int ssb_pcicore_plat_dev_init(struct pci_dev *d);
+int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+
+
+#else /* CONFIG_SSB_DRIVER_PCICORE */
+
+
+struct ssb_pcicore {
+};
+
+static inline
+void ssb_pcicore_init(struct ssb_pcicore *pc)
+{
+}
+
+static inline
+int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
+				   struct ssb_device *dev)
+{
+	return 0;
+}
+
+static inline
+int ssb_pcicore_plat_dev_init(struct pci_dev *d)
+{
+	return -ENODEV;
+}
+static inline
+int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	return -ENODEV;
+}
+
+#endif /* CONFIG_SSB_DRIVER_PCICORE */
+#endif /* LINUX_SSB_PCICORE_H_ */
diff --git a/include/linux/ssb/ssb_embedded.h b/include/linux/ssb/ssb_embedded.h
new file mode 100644
index 00000000..8d8dedff
--- /dev/null
+++ b/include/linux/ssb/ssb_embedded.h
@@ -0,0 +1,18 @@
+#ifndef LINUX_SSB_EMBEDDED_H_
+#define LINUX_SSB_EMBEDDED_H_
+
+#include <linux/types.h>
+#include <linux/ssb/ssb.h>
+
+
+extern int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks);
+
+/* Generic GPIO API */
+u32 ssb_gpio_in(struct ssb_bus *bus, u32 mask);
+u32 ssb_gpio_out(struct ssb_bus *bus, u32 mask, u32 value);
+u32 ssb_gpio_outen(struct ssb_bus *bus, u32 mask, u32 value);
+u32 ssb_gpio_control(struct ssb_bus *bus, u32 mask, u32 value);
+u32 ssb_gpio_intmask(struct ssb_bus *bus, u32 mask, u32 value);
+u32 ssb_gpio_polarity(struct ssb_bus *bus, u32 mask, u32 value);
+
+#endif /* LINUX_SSB_EMBEDDED_H_ */
diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h
new file mode 100644
index 00000000..40b1ef85
--- /dev/null
+++ b/include/linux/ssb/ssb_regs.h
@@ -0,0 +1,594 @@
+#ifndef LINUX_SSB_REGS_H_
+#define LINUX_SSB_REGS_H_
+
+
+/* SiliconBackplane Address Map.
+ * All regions may not exist on all chips.
+ */
+#define SSB_SDRAM_BASE		0x00000000U	/* Physical SDRAM */
+#define SSB_PCI_MEM		0x08000000U	/* Host Mode sb2pcitranslation0 (64 MB) */
+#define SSB_PCI_CFG		0x0c000000U	/* Host Mode sb2pcitranslation1 (64 MB) */
+#define	SSB_SDRAM_SWAPPED	0x10000000U	/* Byteswapped Physical SDRAM */
+#define SSB_ENUM_BASE    	0x18000000U	/* Enumeration space base */
+#define	SSB_ENUM_LIMIT		0x18010000U	/* Enumeration space limit */
+
+#define	SSB_FLASH2		0x1c000000U	/* Flash Region 2 (region 1 shadowed here) */
+#define	SSB_FLASH2_SZ		0x02000000U	/* Size of Flash Region 2 */
+
+#define	SSB_EXTIF_BASE		0x1f000000U	/* External Interface region base address */
+#define	SSB_FLASH1		0x1fc00000U	/* Flash Region 1 */
+#define	SSB_FLASH1_SZ		0x00400000U	/* Size of Flash Region 1 */
+
+#define SSB_PCI_DMA		0x40000000U	/* Client Mode sb2pcitranslation2 (1 GB) */
+#define SSB_PCI_DMA_SZ		0x40000000U	/* Client Mode sb2pcitranslation2 size in bytes */
+#define SSB_PCIE_DMA_L32	0x00000000U	/* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), low 32 bits */
+#define SSB_PCIE_DMA_H32	0x80000000U	/* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), high 32 bits */
+#define	SSB_EUART		(SSB_EXTIF_BASE + 0x00800000)
+#define	SSB_LED			(SSB_EXTIF_BASE + 0x00900000)
+
+
+/* Enumeration space constants */
+#define SSB_CORE_SIZE		0x1000	/* Size of a core MMIO area */
+#define SSB_MAX_NR_CORES	((SSB_ENUM_LIMIT - SSB_ENUM_BASE) / SSB_CORE_SIZE)
+
+
+/* mips address */
+#define	SSB_EJTAG		0xff200000	/* MIPS EJTAG space (2M) */
+
+
+/* SSB PCI config space registers. */
+#define SSB_PMCSR		0x44
+#define  SSB_PE			0x100
+#define	SSB_BAR0_WIN		0x80	/* Backplane address space 0 */
+#define	SSB_BAR1_WIN		0x84	/* Backplane address space 1 */
+#define	SSB_SPROMCTL		0x88	/* SPROM control */
+#define  SSB_SPROMCTL_WE	0x10	/* SPROM write enable */
+#define	SSB_BAR1_CONTROL	0x8c	/* Address space 1 burst control */
+#define SSB_PCI_IRQS		0x90	/* PCI interrupts */
+#define SSB_PCI_IRQMASK		0x94	/* PCI IRQ control and mask (pcirev >= 6 only) */
+#define SSB_BACKPLANE_IRQS	0x98	/* Backplane Interrupts */
+#define SSB_GPIO_IN		0xB0	/* GPIO Input (pcirev >= 3 only) */
+#define SSB_GPIO_OUT		0xB4	/* GPIO Output (pcirev >= 3 only) */
+#define SSB_GPIO_OUT_ENABLE	0xB8	/* GPIO Output Enable/Disable (pcirev >= 3 only) */
+#define  SSB_GPIO_SCS		0x10	/* PCI config space bit 4 for 4306c0 slow clock source */
+#define  SSB_GPIO_HWRAD		0x20	/* PCI config space GPIO 13 for hw radio disable */
+#define  SSB_GPIO_XTAL		0x40	/* PCI config space GPIO 14 for Xtal powerup */
+#define  SSB_GPIO_PLL		0x80	/* PCI config space GPIO 15 for PLL powerdown */
+
+
+#define SSB_BAR0_MAX_RETRIES	50
+
+/* Silicon backplane configuration register definitions */
+#define SSB_IPSFLAG		0x0F08
+#define	 SSB_IPSFLAG_IRQ1	0x0000003F /* which sbflags get routed to mips interrupt 1 */
+#define	 SSB_IPSFLAG_IRQ1_SHIFT	0
+#define	 SSB_IPSFLAG_IRQ2	0x00003F00 /* which sbflags get routed to mips interrupt 2 */
+#define	 SSB_IPSFLAG_IRQ2_SHIFT	8
+#define	 SSB_IPSFLAG_IRQ3	0x003F0000 /* which sbflags get routed to mips interrupt 3 */
+#define	 SSB_IPSFLAG_IRQ3_SHIFT	16
+#define	 SSB_IPSFLAG_IRQ4	0x3F000000 /* which sbflags get routed to mips interrupt 4 */
+#define	 SSB_IPSFLAG_IRQ4_SHIFT	24
+#define SSB_TPSFLAG		0x0F18
+#define  SSB_TPSFLAG_BPFLAG	0x0000003F /* Backplane flag # */
+#define  SSB_TPSFLAG_ALWAYSIRQ	0x00000040 /* IRQ is always sent on the Backplane */
+#define SSB_TMERRLOGA		0x0F48
+#define SSB_TMERRLOG		0x0F50
+#define SSB_ADMATCH3		0x0F60
+#define SSB_ADMATCH2		0x0F68
+#define SSB_ADMATCH1		0x0F70
+#define SSB_IMSTATE		0x0F90     /* SB Initiator Agent State */
+#define  SSB_IMSTATE_PC		0x0000000f /* Pipe Count */
+#define  SSB_IMSTATE_AP_MASK	0x00000030 /* Arbitration Priority */
+#define  SSB_IMSTATE_AP_BOTH	0x00000000 /* Use both timeslices and token */
+#define  SSB_IMSTATE_AP_TS	0x00000010 /* Use timeslices only */
+#define  SSB_IMSTATE_AP_TK	0x00000020 /* Use token only */
+#define  SSB_IMSTATE_AP_RSV	0x00000030 /* Reserved */
+#define  SSB_IMSTATE_IBE	0x00020000 /* In Band Error */
+#define  SSB_IMSTATE_TO		0x00040000 /* Timeout */
+#define  SSB_IMSTATE_BUSY	0x01800000 /* Busy (Backplane rev >= 2.3 only) */
+#define  SSB_IMSTATE_REJECT	0x02000000 /* Reject (Backplane rev >= 2.3 only) */
+#define SSB_INTVEC		0x0F94     /* SB Interrupt Mask */
+#define  SSB_INTVEC_PCI		0x00000001 /* Enable interrupts for PCI */
+#define  SSB_INTVEC_ENET0	0x00000002 /* Enable interrupts for enet 0 */
+#define  SSB_INTVEC_ILINE20	0x00000004 /* Enable interrupts for iline20 */
+#define  SSB_INTVEC_CODEC	0x00000008 /* Enable interrupts for v90 codec */
+#define  SSB_INTVEC_USB		0x00000010 /* Enable interrupts for usb */
+#define  SSB_INTVEC_EXTIF	0x00000020 /* Enable interrupts for external i/f */
+#define  SSB_INTVEC_ENET1	0x00000040 /* Enable interrupts for enet 1 */
+#define SSB_TMSLOW		0x0F98     /* SB Target State Low */
+#define  SSB_TMSLOW_RESET	0x00000001 /* Reset */
+#define  SSB_TMSLOW_REJECT	0x00000002 /* Reject (Standard Backplane) */
+#define  SSB_TMSLOW_REJECT_23	0x00000004 /* Reject (Backplane rev 2.3) */
+#define  SSB_TMSLOW_CLOCK	0x00010000 /* Clock Enable */
+#define  SSB_TMSLOW_FGC		0x00020000 /* Force Gated Clocks On */
+#define  SSB_TMSLOW_PE		0x40000000 /* Power Management Enable */
+#define  SSB_TMSLOW_BE		0x80000000 /* BIST Enable */
+#define SSB_TMSHIGH		0x0F9C     /* SB Target State High */
+#define  SSB_TMSHIGH_SERR	0x00000001 /* S-error */
+#define  SSB_TMSHIGH_INT	0x00000002 /* Interrupt */
+#define  SSB_TMSHIGH_BUSY	0x00000004 /* Busy */
+#define  SSB_TMSHIGH_TO		0x00000020 /* Timeout. Backplane rev >= 2.3 only */
+#define  SSB_TMSHIGH_COREFL	0x1FFF0000 /* Core specific flags */
+#define  SSB_TMSHIGH_COREFL_SHIFT	16
+#define  SSB_TMSHIGH_DMA64	0x10000000 /* 64bit DMA supported */
+#define  SSB_TMSHIGH_GCR	0x20000000 /* Gated Clock Request */
+#define  SSB_TMSHIGH_BISTF	0x40000000 /* BIST Failed */
+#define  SSB_TMSHIGH_BISTD	0x80000000 /* BIST Done */
+#define SSB_BWA0		0x0FA0
+#define SSB_IMCFGLO		0x0FA8
+#define  SSB_IMCFGLO_SERTO	0x00000007 /* Service timeout */
+#define  SSB_IMCFGLO_REQTO	0x00000070 /* Request timeout */
+#define  SSB_IMCFGLO_REQTO_SHIFT	4
+#define  SSB_IMCFGLO_CONNID	0x00FF0000 /* Connection ID */
+#define  SSB_IMCFGLO_CONNID_SHIFT	16
+#define SSB_IMCFGHI		0x0FAC
+#define SSB_ADMATCH0		0x0FB0
+#define SSB_TMCFGLO		0x0FB8
+#define SSB_TMCFGHI		0x0FBC
+#define SSB_BCONFIG		0x0FC0
+#define SSB_BSTATE		0x0FC8
+#define SSB_ACTCFG		0x0FD8
+#define SSB_FLAGST		0x0FE8
+#define SSB_IDLOW		0x0FF8
+#define  SSB_IDLOW_CFGSP	0x00000003 /* Config Space */
+#define  SSB_IDLOW_ADDRNGE	0x00000038 /* Address Ranges supported */
+#define  SSB_IDLOW_ADDRNGE_SHIFT	3
+#define  SSB_IDLOW_SYNC		0x00000040
+#define  SSB_IDLOW_INITIATOR	0x00000080
+#define  SSB_IDLOW_MIBL		0x00000F00 /* Minimum Backplane latency */
+#define  SSB_IDLOW_MIBL_SHIFT	8
+#define  SSB_IDLOW_MABL		0x0000F000 /* Maximum Backplane latency */
+#define  SSB_IDLOW_MABL_SHIFT	12
+#define  SSB_IDLOW_TIF		0x00010000 /* This Initiator is first */
+#define  SSB_IDLOW_CCW		0x000C0000 /* Cycle counter width */
+#define  SSB_IDLOW_CCW_SHIFT	18
+#define  SSB_IDLOW_TPT		0x00F00000 /* Target ports */
+#define  SSB_IDLOW_TPT_SHIFT	20
+#define  SSB_IDLOW_INITP	0x0F000000 /* Initiator ports */
+#define  SSB_IDLOW_INITP_SHIFT	24
+#define  SSB_IDLOW_SSBREV	0xF0000000 /* Sonics Backplane Revision code */
+#define  SSB_IDLOW_SSBREV_22	0x00000000 /* <= 2.2 */
+#define  SSB_IDLOW_SSBREV_23	0x10000000 /* 2.3 */
+#define  SSB_IDLOW_SSBREV_24	0x40000000 /* ?? Found in BCM4328 */
+#define  SSB_IDLOW_SSBREV_25	0x50000000 /* ?? Not Found yet */
+#define  SSB_IDLOW_SSBREV_26	0x60000000 /* ?? Found in some BCM4311/2 */
+#define  SSB_IDLOW_SSBREV_27	0x70000000 /* ?? Found in some BCM4311/2 */
+#define SSB_IDHIGH		0x0FFC     /* SB Identification High */
+#define  SSB_IDHIGH_RCLO	0x0000000F /* Revision Code (low part) */
+#define  SSB_IDHIGH_CC		0x00008FF0 /* Core Code */
+#define  SSB_IDHIGH_CC_SHIFT	4
+#define  SSB_IDHIGH_RCHI	0x00007000 /* Revision Code (high part) */
+#define  SSB_IDHIGH_RCHI_SHIFT	8	   /* yes, shift 8 is right */
+#define  SSB_IDHIGH_VC		0xFFFF0000 /* Vendor Code */
+#define  SSB_IDHIGH_VC_SHIFT	16
+
+/* SPROM shadow area. If not otherwise noted, fields are
+ * two bytes wide. Note that the SPROM can _only_ be read
+ * in two-byte quantities.
+ */
+#define SSB_SPROMSIZE_WORDS		64
+#define SSB_SPROMSIZE_BYTES		(SSB_SPROMSIZE_WORDS * sizeof(u16))
+#define SSB_SPROMSIZE_WORDS_R123	64
+#define SSB_SPROMSIZE_WORDS_R4		220
+#define SSB_SPROMSIZE_BYTES_R123	(SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
+#define SSB_SPROMSIZE_BYTES_R4		(SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
+#define SSB_SPROM_BASE1			0x1000
+#define SSB_SPROM_BASE31		0x0800
+#define SSB_SPROM_REVISION		0x007E
+#define  SSB_SPROM_REVISION_REV		0x00FF	/* SPROM Revision number */
+#define  SSB_SPROM_REVISION_CRC		0xFF00	/* SPROM CRC8 value */
+#define  SSB_SPROM_REVISION_CRC_SHIFT	8
+
+/* SPROM Revision 1 */
+#define SSB_SPROM1_SPID			0x0004	/* Subsystem Product ID for PCI */
+#define SSB_SPROM1_SVID			0x0006	/* Subsystem Vendor ID for PCI */
+#define SSB_SPROM1_PID			0x0008	/* Product ID for PCI */
+#define SSB_SPROM1_IL0MAC		0x0048	/* 6 bytes MAC address for 802.11b/g */
+#define SSB_SPROM1_ET0MAC		0x004E	/* 6 bytes MAC address for Ethernet */
+#define SSB_SPROM1_ET1MAC		0x0054	/* 6 bytes MAC address for 802.11a */
+#define SSB_SPROM1_ETHPHY		0x005A	/* Ethernet PHY settings */
+#define  SSB_SPROM1_ETHPHY_ET0A		0x001F	/* MII Address for enet0 */
+#define  SSB_SPROM1_ETHPHY_ET1A		0x03E0	/* MII Address for enet1 */
+#define  SSB_SPROM1_ETHPHY_ET1A_SHIFT	5
+#define  SSB_SPROM1_ETHPHY_ET0M		(1<<14)	/* MDIO for enet0 */
+#define  SSB_SPROM1_ETHPHY_ET1M		(1<<15)	/* MDIO for enet1 */
+#define SSB_SPROM1_BINF			0x005C	/* Board info */
+#define  SSB_SPROM1_BINF_BREV		0x00FF	/* Board Revision */
+#define  SSB_SPROM1_BINF_CCODE		0x0F00	/* Country Code */
+#define  SSB_SPROM1_BINF_CCODE_SHIFT	8
+#define  SSB_SPROM1_BINF_ANTBG		0x3000	/* Available B-PHY and G-PHY antennas */
+#define  SSB_SPROM1_BINF_ANTBG_SHIFT	12
+#define  SSB_SPROM1_BINF_ANTA		0xC000	/* Available A-PHY antennas */
+#define  SSB_SPROM1_BINF_ANTA_SHIFT	14
+#define SSB_SPROM1_PA0B0		0x005E
+#define SSB_SPROM1_PA0B1		0x0060
+#define SSB_SPROM1_PA0B2		0x0062
+#define SSB_SPROM1_GPIOA		0x0064	/* General Purpose IO pins 0 and 1 */
+#define  SSB_SPROM1_GPIOA_P0		0x00FF	/* Pin 0 */
+#define  SSB_SPROM1_GPIOA_P1		0xFF00	/* Pin 1 */
+#define  SSB_SPROM1_GPIOA_P1_SHIFT	8
+#define SSB_SPROM1_GPIOB		0x0066	/* General Purpuse IO pins 2 and 3 */
+#define  SSB_SPROM1_GPIOB_P2		0x00FF	/* Pin 2 */
+#define  SSB_SPROM1_GPIOB_P3		0xFF00	/* Pin 3 */
+#define  SSB_SPROM1_GPIOB_P3_SHIFT	8
+#define SSB_SPROM1_MAXPWR		0x0068	/* Power Amplifier Max Power */
+#define  SSB_SPROM1_MAXPWR_BG		0x00FF	/* B-PHY and G-PHY (in dBm Q5.2) */
+#define  SSB_SPROM1_MAXPWR_A		0xFF00	/* A-PHY (in dBm Q5.2) */
+#define  SSB_SPROM1_MAXPWR_A_SHIFT	8
+#define SSB_SPROM1_PA1B0		0x006A
+#define SSB_SPROM1_PA1B1		0x006C
+#define SSB_SPROM1_PA1B2		0x006E
+#define SSB_SPROM1_ITSSI		0x0070	/* Idle TSSI Target */
+#define  SSB_SPROM1_ITSSI_BG		0x00FF	/* B-PHY and G-PHY*/
+#define  SSB_SPROM1_ITSSI_A		0xFF00	/* A-PHY */
+#define  SSB_SPROM1_ITSSI_A_SHIFT	8
+#define SSB_SPROM1_BFLLO		0x0072	/* Boardflags (low 16 bits) */
+#define SSB_SPROM1_AGAIN		0x0074	/* Antenna Gain (in dBm Q5.2) */
+#define  SSB_SPROM1_AGAIN_BG		0x00FF	/* B-PHY and G-PHY */
+#define  SSB_SPROM1_AGAIN_BG_SHIFT	0
+#define  SSB_SPROM1_AGAIN_A		0xFF00	/* A-PHY */
+#define  SSB_SPROM1_AGAIN_A_SHIFT	8
+
+/* SPROM Revision 2 (inherits from rev 1) */
+#define SSB_SPROM2_BFLHI		0x0038	/* Boardflags (high 16 bits) */
+#define SSB_SPROM2_MAXP_A		0x003A	/* A-PHY Max Power */
+#define  SSB_SPROM2_MAXP_A_HI		0x00FF	/* Max Power High */
+#define  SSB_SPROM2_MAXP_A_LO		0xFF00	/* Max Power Low */
+#define  SSB_SPROM2_MAXP_A_LO_SHIFT	8
+#define SSB_SPROM2_PA1LOB0		0x003C	/* A-PHY PowerAmplifier Low Settings */
+#define SSB_SPROM2_PA1LOB1		0x003E	/* A-PHY PowerAmplifier Low Settings */
+#define SSB_SPROM2_PA1LOB2		0x0040	/* A-PHY PowerAmplifier Low Settings */
+#define SSB_SPROM2_PA1HIB0		0x0042	/* A-PHY PowerAmplifier High Settings */
+#define SSB_SPROM2_PA1HIB1		0x0044	/* A-PHY PowerAmplifier High Settings */
+#define SSB_SPROM2_PA1HIB2		0x0046	/* A-PHY PowerAmplifier High Settings */
+#define SSB_SPROM2_OPO			0x0078	/* OFDM Power Offset from CCK Level */
+#define  SSB_SPROM2_OPO_VALUE		0x00FF
+#define  SSB_SPROM2_OPO_UNUSED		0xFF00
+#define SSB_SPROM2_CCODE		0x007C	/* Two char Country Code */
+
+/* SPROM Revision 3 (inherits most data from rev 2) */
+#define SSB_SPROM3_OFDMAPO		0x002C	/* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
+#define SSB_SPROM3_OFDMALPO		0x0030	/* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
+#define SSB_SPROM3_OFDMAHPO		0x0034	/* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
+#define SSB_SPROM3_GPIOLDC		0x0042	/* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
+#define  SSB_SPROM3_GPIOLDC_OFF		0x0000FF00	/* Off Count */
+#define  SSB_SPROM3_GPIOLDC_OFF_SHIFT	8
+#define  SSB_SPROM3_GPIOLDC_ON		0x00FF0000	/* On Count */
+#define  SSB_SPROM3_GPIOLDC_ON_SHIFT	16
+#define SSB_SPROM3_IL0MAC		0x004A	/* 6 bytes MAC address for 802.11b/g */
+#define SSB_SPROM3_CCKPO		0x0078	/* CCK Power Offset */
+#define  SSB_SPROM3_CCKPO_1M		0x000F	/* 1M Rate PO */
+#define  SSB_SPROM3_CCKPO_2M		0x00F0	/* 2M Rate PO */
+#define  SSB_SPROM3_CCKPO_2M_SHIFT	4
+#define  SSB_SPROM3_CCKPO_55M		0x0F00	/* 5.5M Rate PO */
+#define  SSB_SPROM3_CCKPO_55M_SHIFT	8
+#define  SSB_SPROM3_CCKPO_11M		0xF000	/* 11M Rate PO */
+#define  SSB_SPROM3_CCKPO_11M_SHIFT	12
+#define  SSB_SPROM3_OFDMGPO		0x107A	/* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
+
+/* SPROM Revision 4 */
+#define SSB_SPROM4_BFLLO		0x0044	/* Boardflags (low 16 bits) */
+#define SSB_SPROM4_BFLHI		0x0046  /* Board Flags Hi */
+#define SSB_SPROM4_BFL2LO		0x0048	/* Board flags 2 (low 16 bits) */
+#define SSB_SPROM4_BFL2HI		0x004A	/* Board flags 2 Hi */
+#define SSB_SPROM4_IL0MAC		0x004C	/* 6 byte MAC address for a/b/g/n */
+#define SSB_SPROM4_CCODE		0x0052	/* Country Code (2 bytes) */
+#define SSB_SPROM4_GPIOA		0x0056	/* Gen. Purpose IO # 0 and 1 */
+#define  SSB_SPROM4_GPIOA_P0		0x00FF	/* Pin 0 */
+#define  SSB_SPROM4_GPIOA_P1		0xFF00	/* Pin 1 */
+#define  SSB_SPROM4_GPIOA_P1_SHIFT	8
+#define SSB_SPROM4_GPIOB		0x0058	/* Gen. Purpose IO # 2 and 3 */
+#define  SSB_SPROM4_GPIOB_P2		0x00FF	/* Pin 2 */
+#define  SSB_SPROM4_GPIOB_P3		0xFF00	/* Pin 3 */
+#define  SSB_SPROM4_GPIOB_P3_SHIFT	8
+#define SSB_SPROM4_ETHPHY		0x005A	/* Ethernet PHY settings ?? */
+#define  SSB_SPROM4_ETHPHY_ET0A		0x001F	/* MII Address for enet0 */
+#define  SSB_SPROM4_ETHPHY_ET1A		0x03E0	/* MII Address for enet1 */
+#define  SSB_SPROM4_ETHPHY_ET1A_SHIFT	5
+#define  SSB_SPROM4_ETHPHY_ET0M		(1<<14)	/* MDIO for enet0 */
+#define  SSB_SPROM4_ETHPHY_ET1M		(1<<15)	/* MDIO for enet1 */
+#define SSB_SPROM4_ANTAVAIL		0x005D  /* Antenna available bitfields */
+#define  SSB_SPROM4_ANTAVAIL_A		0x00FF	/* A-PHY bitfield */
+#define  SSB_SPROM4_ANTAVAIL_A_SHIFT	0
+#define  SSB_SPROM4_ANTAVAIL_BG		0xFF00	/* B-PHY and G-PHY bitfield */
+#define  SSB_SPROM4_ANTAVAIL_BG_SHIFT	8
+#define SSB_SPROM4_AGAIN01		0x005E	/* Antenna Gain (in dBm Q5.2) */
+#define  SSB_SPROM4_AGAIN0		0x00FF	/* Antenna 0 */
+#define  SSB_SPROM4_AGAIN0_SHIFT	0
+#define  SSB_SPROM4_AGAIN1		0xFF00	/* Antenna 1 */
+#define  SSB_SPROM4_AGAIN1_SHIFT	8
+#define SSB_SPROM4_AGAIN23		0x0060
+#define  SSB_SPROM4_AGAIN2		0x00FF	/* Antenna 2 */
+#define  SSB_SPROM4_AGAIN2_SHIFT	0
+#define  SSB_SPROM4_AGAIN3		0xFF00	/* Antenna 3 */
+#define  SSB_SPROM4_AGAIN3_SHIFT	8
+#define SSB_SPROM4_TXPID2G01		0x0062 	/* TX Power Index 2GHz */
+#define  SSB_SPROM4_TXPID2G0		0x00FF
+#define  SSB_SPROM4_TXPID2G0_SHIFT	0
+#define  SSB_SPROM4_TXPID2G1		0xFF00
+#define  SSB_SPROM4_TXPID2G1_SHIFT	8
+#define SSB_SPROM4_TXPID2G23		0x0064 	/* TX Power Index 2GHz */
+#define  SSB_SPROM4_TXPID2G2		0x00FF
+#define  SSB_SPROM4_TXPID2G2_SHIFT	0
+#define  SSB_SPROM4_TXPID2G3		0xFF00
+#define  SSB_SPROM4_TXPID2G3_SHIFT	8
+#define SSB_SPROM4_TXPID5G01		0x0066 	/* TX Power Index 5GHz middle subband */
+#define  SSB_SPROM4_TXPID5G0		0x00FF
+#define  SSB_SPROM4_TXPID5G0_SHIFT	0
+#define  SSB_SPROM4_TXPID5G1		0xFF00
+#define  SSB_SPROM4_TXPID5G1_SHIFT	8
+#define SSB_SPROM4_TXPID5G23		0x0068 	/* TX Power Index 5GHz middle subband */
+#define  SSB_SPROM4_TXPID5G2		0x00FF
+#define  SSB_SPROM4_TXPID5G2_SHIFT	0
+#define  SSB_SPROM4_TXPID5G3		0xFF00
+#define  SSB_SPROM4_TXPID5G3_SHIFT	8
+#define SSB_SPROM4_TXPID5GL01		0x006A 	/* TX Power Index 5GHz low subband */
+#define  SSB_SPROM4_TXPID5GL0		0x00FF
+#define  SSB_SPROM4_TXPID5GL0_SHIFT	0
+#define  SSB_SPROM4_TXPID5GL1		0xFF00
+#define  SSB_SPROM4_TXPID5GL1_SHIFT	8
+#define SSB_SPROM4_TXPID5GL23		0x006C 	/* TX Power Index 5GHz low subband */
+#define  SSB_SPROM4_TXPID5GL2		0x00FF
+#define  SSB_SPROM4_TXPID5GL2_SHIFT	0
+#define  SSB_SPROM4_TXPID5GL3		0xFF00
+#define  SSB_SPROM4_TXPID5GL3_SHIFT	8
+#define SSB_SPROM4_TXPID5GH01		0x006E 	/* TX Power Index 5GHz high subband */
+#define  SSB_SPROM4_TXPID5GH0		0x00FF
+#define  SSB_SPROM4_TXPID5GH0_SHIFT	0
+#define  SSB_SPROM4_TXPID5GH1		0xFF00
+#define  SSB_SPROM4_TXPID5GH1_SHIFT	8
+#define SSB_SPROM4_TXPID5GH23		0x0070 	/* TX Power Index 5GHz high subband */
+#define  SSB_SPROM4_TXPID5GH2		0x00FF
+#define  SSB_SPROM4_TXPID5GH2_SHIFT	0
+#define  SSB_SPROM4_TXPID5GH3		0xFF00
+#define  SSB_SPROM4_TXPID5GH3_SHIFT	8
+#define SSB_SPROM4_MAXP_BG		0x0080  /* Max Power BG in path 1 */
+#define  SSB_SPROM4_MAXP_BG_MASK	0x00FF  /* Mask for Max Power BG */
+#define  SSB_SPROM4_ITSSI_BG		0xFF00	/* Mask for path 1 itssi_bg */
+#define  SSB_SPROM4_ITSSI_BG_SHIFT	8
+#define SSB_SPROM4_MAXP_A		0x008A  /* Max Power A in path 1 */
+#define  SSB_SPROM4_MAXP_A_MASK		0x00FF  /* Mask for Max Power A */
+#define  SSB_SPROM4_ITSSI_A		0xFF00	/* Mask for path 1 itssi_a */
+#define  SSB_SPROM4_ITSSI_A_SHIFT	8
+#define SSB_SPROM4_PA0B0		0x0082	/* The paXbY locations are */
+#define SSB_SPROM4_PA0B1		0x0084	/*   only guesses */
+#define SSB_SPROM4_PA0B2		0x0086
+#define SSB_SPROM4_PA1B0		0x008E
+#define SSB_SPROM4_PA1B1		0x0090
+#define SSB_SPROM4_PA1B2		0x0092
+
+/* SPROM Revision 5 (inherits most data from rev 4) */
+#define SSB_SPROM5_CCODE		0x0044	/* Country Code (2 bytes) */
+#define SSB_SPROM5_BFLLO		0x004A	/* Boardflags (low 16 bits) */
+#define SSB_SPROM5_BFLHI		0x004C  /* Board Flags Hi */
+#define SSB_SPROM5_BFL2LO		0x004E	/* Board flags 2 (low 16 bits) */
+#define SSB_SPROM5_BFL2HI		0x0050	/* Board flags 2 Hi */
+#define SSB_SPROM5_IL0MAC		0x0052	/* 6 byte MAC address for a/b/g/n */
+#define SSB_SPROM5_GPIOA		0x0076	/* Gen. Purpose IO # 0 and 1 */
+#define  SSB_SPROM5_GPIOA_P0		0x00FF	/* Pin 0 */
+#define  SSB_SPROM5_GPIOA_P1		0xFF00	/* Pin 1 */
+#define  SSB_SPROM5_GPIOA_P1_SHIFT	8
+#define SSB_SPROM5_GPIOB		0x0078	/* Gen. Purpose IO # 2 and 3 */
+#define  SSB_SPROM5_GPIOB_P2		0x00FF	/* Pin 2 */
+#define  SSB_SPROM5_GPIOB_P3		0xFF00	/* Pin 3 */
+#define  SSB_SPROM5_GPIOB_P3_SHIFT	8
+
+/* SPROM Revision 8 */
+#define SSB_SPROM8_BOARDREV		0x0082	/* Board revision */
+#define SSB_SPROM8_BFLLO		0x0084	/* Board flags (bits 0-15) */
+#define SSB_SPROM8_BFLHI		0x0086	/* Board flags (bits 16-31) */
+#define SSB_SPROM8_BFL2LO		0x0088	/* Board flags (bits 32-47) */
+#define SSB_SPROM8_BFL2HI		0x008A	/* Board flags (bits 48-63) */
+#define SSB_SPROM8_IL0MAC		0x008C	/* 6 byte MAC address */
+#define SSB_SPROM8_CCODE		0x0092	/* 2 byte country code */
+#define SSB_SPROM8_GPIOA		0x0096	/*Gen. Purpose IO # 0 and 1 */
+#define  SSB_SPROM8_GPIOA_P0		0x00FF	/* Pin 0 */
+#define  SSB_SPROM8_GPIOA_P1		0xFF00	/* Pin 1 */
+#define  SSB_SPROM8_GPIOA_P1_SHIFT	8
+#define SSB_SPROM8_GPIOB		0x0098	/* Gen. Purpose IO # 2 and 3 */
+#define  SSB_SPROM8_GPIOB_P2		0x00FF	/* Pin 2 */
+#define  SSB_SPROM8_GPIOB_P3		0xFF00	/* Pin 3 */
+#define  SSB_SPROM8_GPIOB_P3_SHIFT	8
+#define SSB_SPROM8_ANTAVAIL		0x009C  /* Antenna available bitfields*/
+#define  SSB_SPROM8_ANTAVAIL_A		0xFF00	/* A-PHY bitfield */
+#define  SSB_SPROM8_ANTAVAIL_A_SHIFT	8
+#define  SSB_SPROM8_ANTAVAIL_BG		0x00FF	/* B-PHY and G-PHY bitfield */
+#define  SSB_SPROM8_ANTAVAIL_BG_SHIFT	0
+#define SSB_SPROM8_AGAIN01		0x009E	/* Antenna Gain (in dBm Q5.2) */
+#define  SSB_SPROM8_AGAIN0		0x00FF	/* Antenna 0 */
+#define  SSB_SPROM8_AGAIN0_SHIFT	0
+#define  SSB_SPROM8_AGAIN1		0xFF00	/* Antenna 1 */
+#define  SSB_SPROM8_AGAIN1_SHIFT	8
+#define SSB_SPROM8_AGAIN23		0x00A0
+#define  SSB_SPROM8_AGAIN2		0x00FF	/* Antenna 2 */
+#define  SSB_SPROM8_AGAIN2_SHIFT	0
+#define  SSB_SPROM8_AGAIN3		0xFF00	/* Antenna 3 */
+#define  SSB_SPROM8_AGAIN3_SHIFT	8
+#define SSB_SPROM8_RSSIPARM2G		0x00A4	/* RSSI params for 2GHz */
+#define  SSB_SPROM8_RSSISMF2G		0x000F
+#define  SSB_SPROM8_RSSISMC2G		0x00F0
+#define  SSB_SPROM8_RSSISMC2G_SHIFT	4
+#define  SSB_SPROM8_RSSISAV2G		0x0700
+#define  SSB_SPROM8_RSSISAV2G_SHIFT	8
+#define  SSB_SPROM8_BXA2G		0x1800
+#define  SSB_SPROM8_BXA2G_SHIFT		11
+#define SSB_SPROM8_RSSIPARM5G		0x00A6	/* RSSI params for 5GHz */
+#define  SSB_SPROM8_RSSISMF5G		0x000F
+#define  SSB_SPROM8_RSSISMC5G		0x00F0
+#define  SSB_SPROM8_RSSISMC5G_SHIFT	4
+#define  SSB_SPROM8_RSSISAV5G		0x0700
+#define  SSB_SPROM8_RSSISAV5G_SHIFT	8
+#define  SSB_SPROM8_BXA5G		0x1800
+#define  SSB_SPROM8_BXA5G_SHIFT		11
+#define SSB_SPROM8_TRI25G		0x00A8	/* TX isolation 2.4&5.3GHz */
+#define  SSB_SPROM8_TRI2G		0x00FF	/* TX isolation 2.4GHz */
+#define  SSB_SPROM8_TRI5G		0xFF00	/* TX isolation 5.3GHz */
+#define  SSB_SPROM8_TRI5G_SHIFT		8
+#define SSB_SPROM8_TRI5GHL		0x00AA	/* TX isolation 5.2/5.8GHz */
+#define  SSB_SPROM8_TRI5GL		0x00FF	/* TX isolation 5.2GHz */
+#define  SSB_SPROM8_TRI5GH		0xFF00	/* TX isolation 5.8GHz */
+#define  SSB_SPROM8_TRI5GH_SHIFT	8
+#define SSB_SPROM8_RXPO			0x00AC  /* RX power offsets */
+#define  SSB_SPROM8_RXPO2G		0x00FF	/* 2GHz RX power offset */
+#define  SSB_SPROM8_RXPO5G		0xFF00	/* 5GHz RX power offset */
+#define  SSB_SPROM8_RXPO5G_SHIFT	8
+#define SSB_SPROM8_FEM2G		0x00AE
+#define SSB_SPROM8_FEM5G		0x00B0
+#define  SSB_SROM8_FEM_TSSIPOS		0x0001
+#define  SSB_SROM8_FEM_TSSIPOS_SHIFT	0
+#define  SSB_SROM8_FEM_EXTPA_GAIN	0x0006
+#define  SSB_SROM8_FEM_EXTPA_GAIN_SHIFT	1
+#define  SSB_SROM8_FEM_PDET_RANGE	0x00F8
+#define  SSB_SROM8_FEM_PDET_RANGE_SHIFT	3
+#define  SSB_SROM8_FEM_TR_ISO		0x0700
+#define  SSB_SROM8_FEM_TR_ISO_SHIFT	8
+#define  SSB_SROM8_FEM_ANTSWLUT		0xF800
+#define  SSB_SROM8_FEM_ANTSWLUT_SHIFT	11
+#define SSB_SPROM8_THERMAL		0x00B2
+#define SSB_SPROM8_MPWR_RAWTS		0x00B4
+#define SSB_SPROM8_TS_SLP_OPT_CORRX	0x00B6
+#define SSB_SPROM8_FOC_HWIQ_IQSWP	0x00B8
+#define SSB_SPROM8_PHYCAL_TEMPDELTA	0x00BA
+
+/* There are 4 blocks with power info sharing the same layout */
+#define SSB_SROM8_PWR_INFO_CORE0	0x00C0
+#define SSB_SROM8_PWR_INFO_CORE1	0x00E0
+#define SSB_SROM8_PWR_INFO_CORE2	0x0100
+#define SSB_SROM8_PWR_INFO_CORE3	0x0120
+
+#define SSB_SROM8_2G_MAXP_ITSSI		0x00
+#define  SSB_SPROM8_2G_MAXP		0x00FF
+#define  SSB_SPROM8_2G_ITSSI		0xFF00
+#define  SSB_SPROM8_2G_ITSSI_SHIFT	8
+#define SSB_SROM8_2G_PA_0		0x02	/* 2GHz power amp settings */
+#define SSB_SROM8_2G_PA_1		0x04
+#define SSB_SROM8_2G_PA_2		0x06
+#define SSB_SROM8_5G_MAXP_ITSSI		0x08	/* 5GHz ITSSI and 5.3GHz Max Power */
+#define  SSB_SPROM8_5G_MAXP		0x00FF
+#define  SSB_SPROM8_5G_ITSSI		0xFF00
+#define  SSB_SPROM8_5G_ITSSI_SHIFT	8
+#define SSB_SPROM8_5GHL_MAXP		0x0A	/* 5.2GHz and 5.8GHz Max Power */
+#define  SSB_SPROM8_5GH_MAXP		0x00FF
+#define  SSB_SPROM8_5GL_MAXP		0xFF00
+#define  SSB_SPROM8_5GL_MAXP_SHIFT	8
+#define SSB_SROM8_5G_PA_0		0x0C	/* 5.3GHz power amp settings */
+#define SSB_SROM8_5G_PA_1		0x0E
+#define SSB_SROM8_5G_PA_2		0x10
+#define SSB_SROM8_5GL_PA_0		0x12	/* 5.2GHz power amp settings */
+#define SSB_SROM8_5GL_PA_1		0x14
+#define SSB_SROM8_5GL_PA_2		0x16
+#define SSB_SROM8_5GH_PA_0		0x18	/* 5.8GHz power amp settings */
+#define SSB_SROM8_5GH_PA_1		0x1A
+#define SSB_SROM8_5GH_PA_2		0x1C
+
+/* TODO: Make it deprecated */
+#define SSB_SPROM8_MAXP_BG		0x00C0  /* Max Power 2GHz in path 1 */
+#define  SSB_SPROM8_MAXP_BG_MASK	0x00FF  /* Mask for Max Power 2GHz */
+#define  SSB_SPROM8_ITSSI_BG		0xFF00	/* Mask for path 1 itssi_bg */
+#define  SSB_SPROM8_ITSSI_BG_SHIFT	8
+#define SSB_SPROM8_PA0B0		0x00C2	/* 2GHz power amp settings */
+#define SSB_SPROM8_PA0B1		0x00C4
+#define SSB_SPROM8_PA0B2		0x00C6
+#define SSB_SPROM8_MAXP_A		0x00C8  /* Max Power 5.3GHz */
+#define  SSB_SPROM8_MAXP_A_MASK		0x00FF  /* Mask for Max Power 5.3GHz */
+#define  SSB_SPROM8_ITSSI_A		0xFF00	/* Mask for path 1 itssi_a */
+#define  SSB_SPROM8_ITSSI_A_SHIFT	8
+#define SSB_SPROM8_MAXP_AHL		0x00CA  /* Max Power 5.2/5.8GHz */
+#define  SSB_SPROM8_MAXP_AH_MASK	0x00FF  /* Mask for Max Power 5.8GHz */
+#define  SSB_SPROM8_MAXP_AL_MASK	0xFF00  /* Mask for Max Power 5.2GHz */
+#define  SSB_SPROM8_MAXP_AL_SHIFT	8
+#define SSB_SPROM8_PA1B0		0x00CC	/* 5.3GHz power amp settings */
+#define SSB_SPROM8_PA1B1		0x00CE
+#define SSB_SPROM8_PA1B2		0x00D0
+#define SSB_SPROM8_PA1LOB0		0x00D2	/* 5.2GHz power amp settings */
+#define SSB_SPROM8_PA1LOB1		0x00D4
+#define SSB_SPROM8_PA1LOB2		0x00D6
+#define SSB_SPROM8_PA1HIB0		0x00D8	/* 5.8GHz power amp settings */
+#define SSB_SPROM8_PA1HIB1		0x00DA
+#define SSB_SPROM8_PA1HIB2		0x00DC
+
+#define SSB_SPROM8_CCK2GPO		0x0140	/* CCK power offset */
+#define SSB_SPROM8_OFDM2GPO		0x0142	/* 2.4GHz OFDM power offset */
+#define SSB_SPROM8_OFDM5GPO		0x0146	/* 5.3GHz OFDM power offset */
+#define SSB_SPROM8_OFDM5GLPO		0x014A	/* 5.2GHz OFDM power offset */
+#define SSB_SPROM8_OFDM5GHPO		0x014E	/* 5.8GHz OFDM power offset */
+
+/* Values for boardflags_lo read from SPROM */
+#define SSB_BFL_BTCOEXIST		0x0001	/* implements Bluetooth coexistance */
+#define SSB_BFL_PACTRL			0x0002	/* GPIO 9 controlling the PA */
+#define SSB_BFL_AIRLINEMODE		0x0004	/* implements GPIO 13 radio disable indication */
+#define SSB_BFL_RSSI			0x0008	/* software calculates nrssi slope. */
+#define SSB_BFL_ENETSPI			0x0010	/* has ephy roboswitch spi */
+#define SSB_BFL_XTAL_NOSLOW		0x0020	/* no slow clock available */
+#define SSB_BFL_CCKHIPWR		0x0040	/* can do high power CCK transmission */
+#define SSB_BFL_ENETADM			0x0080	/* has ADMtek switch */
+#define SSB_BFL_ENETVLAN		0x0100	/* can do vlan */
+#define SSB_BFL_AFTERBURNER		0x0200	/* supports Afterburner mode */
+#define SSB_BFL_NOPCI			0x0400	/* board leaves PCI floating */
+#define SSB_BFL_FEM			0x0800	/* supports the Front End Module */
+#define SSB_BFL_EXTLNA			0x1000	/* has an external LNA */
+#define SSB_BFL_HGPA			0x2000	/* had high gain PA */
+#define SSB_BFL_BTCMOD			0x4000	/* BFL_BTCOEXIST is given in alternate GPIOs */
+#define SSB_BFL_ALTIQ			0x8000	/* alternate I/Q settings */
+
+/* Values for boardflags_hi read from SPROM */
+#define SSB_BFH_NOPA			0x0001	/* has no PA */
+#define SSB_BFH_RSSIINV			0x0002	/* RSSI uses positive slope (not TSSI) */
+#define SSB_BFH_PAREF			0x0004	/* uses the PARef LDO */
+#define SSB_BFH_3TSWITCH		0x0008	/* uses a triple throw switch shared with bluetooth */
+#define SSB_BFH_PHASESHIFT		0x0010	/* can support phase shifter */
+#define SSB_BFH_BUCKBOOST		0x0020	/* has buck/booster */
+#define SSB_BFH_FEM_BT			0x0040	/* has FEM and switch to share antenna with bluetooth */
+
+/* Values for boardflags2_lo read from SPROM */
+#define SSB_BFL2_RXBB_INT_REG_DIS	0x0001	/* external RX BB regulator present */
+#define SSB_BFL2_APLL_WAR		0x0002	/* alternative A-band PLL settings implemented */
+#define SSB_BFL2_TXPWRCTRL_EN 		0x0004	/* permits enabling TX Power Control */
+#define SSB_BFL2_2X4_DIV		0x0008	/* 2x4 diversity switch */
+#define SSB_BFL2_5G_PWRGAIN		0x0010	/* supports 5G band power gain */
+#define SSB_BFL2_PCIEWAR_OVR		0x0020	/* overrides ASPM and Clkreq settings */
+#define SSB_BFL2_CAESERS_BRD		0x0040	/* is Caesers board (unused) */
+#define SSB_BFL2_BTC3WIRE		0x0080	/* used 3-wire bluetooth coexist */
+#define SSB_BFL2_SKWRKFEM_BRD		0x0100	/* 4321mcm93 uses Skyworks FEM */
+#define SSB_BFL2_SPUR_WAR		0x0200	/* has a workaround for clock-harmonic spurs */
+#define SSB_BFL2_GPLL_WAR		0x0400	/* altenative G-band PLL settings implemented */
+
+/* Values for SSB_SPROM1_BINF_CCODE */
+enum {
+	SSB_SPROM1CCODE_WORLD = 0,
+	SSB_SPROM1CCODE_THAILAND,
+	SSB_SPROM1CCODE_ISRAEL,
+	SSB_SPROM1CCODE_JORDAN,
+	SSB_SPROM1CCODE_CHINA,
+	SSB_SPROM1CCODE_JAPAN,
+	SSB_SPROM1CCODE_USA_CANADA_ANZ,
+	SSB_SPROM1CCODE_EUROPE,
+	SSB_SPROM1CCODE_USA_LOW,
+	SSB_SPROM1CCODE_JAPAN_HIGH,
+	SSB_SPROM1CCODE_ALL,
+	SSB_SPROM1CCODE_NONE,
+};
+
+/* Address-Match values and masks (SSB_ADMATCHxxx) */
+#define SSB_ADM_TYPE			0x00000003	/* Address type */
+#define  SSB_ADM_TYPE0			0
+#define  SSB_ADM_TYPE1			1
+#define  SSB_ADM_TYPE2			2
+#define SSB_ADM_AD64			0x00000004
+#define SSB_ADM_SZ0			0x000000F8	/* Type0 size */
+#define SSB_ADM_SZ0_SHIFT		3
+#define SSB_ADM_SZ1			0x000001F8	/* Type1 size */
+#define SSB_ADM_SZ1_SHIFT		3
+#define SSB_ADM_SZ2			0x000001F8	/* Type2 size */
+#define SSB_ADM_SZ2_SHIFT		3
+#define SSB_ADM_EN			0x00000400	/* Enable */
+#define SSB_ADM_NEG			0x00000800	/* Negative decode */
+#define SSB_ADM_BASE0			0xFFFFFF00	/* Type0 base address */
+#define SSB_ADM_BASE0_SHIFT		8
+#define SSB_ADM_BASE1			0xFFFFF000	/* Type1 base address for the core */
+#define SSB_ADM_BASE1_SHIFT		12
+#define SSB_ADM_BASE2			0xFFFF0000	/* Type2 base address for the core */
+#define SSB_ADM_BASE2_SHIFT		16
+
+
+#endif /* LINUX_SSB_REGS_H_ */
diff --git a/include/linux/stackprotector.h b/include/linux/stackprotector.h
new file mode 100644
index 00000000..6f3e54c7
--- /dev/null
+++ b/include/linux/stackprotector.h
@@ -0,0 +1,16 @@
+#ifndef _LINUX_STACKPROTECTOR_H
+#define _LINUX_STACKPROTECTOR_H 1
+
+#include <linux/compiler.h>
+#include <linux/sched.h>
+#include <linux/random.h>
+
+#ifdef CONFIG_CC_STACKPROTECTOR
+# include <asm/stackprotector.h>
+#else
+static inline void boot_init_stack_canary(void)
+{
+}
+#endif
+
+#endif
diff --git a/include/linux/stacktrace.h b/include/linux/stacktrace.h
new file mode 100644
index 00000000..115b570e
--- /dev/null
+++ b/include/linux/stacktrace.h
@@ -0,0 +1,37 @@
+#ifndef __LINUX_STACKTRACE_H
+#define __LINUX_STACKTRACE_H
+
+struct task_struct;
+struct pt_regs;
+
+#ifdef CONFIG_STACKTRACE
+struct task_struct;
+
+struct stack_trace {
+	unsigned int nr_entries, max_entries;
+	unsigned long *entries;
+	int skip;	/* input argument: How many entries to skip */
+};
+
+extern void save_stack_trace(struct stack_trace *trace);
+extern void save_stack_trace_regs(struct pt_regs *regs,
+				  struct stack_trace *trace);
+extern void save_stack_trace_tsk(struct task_struct *tsk,
+				struct stack_trace *trace);
+
+extern void print_stack_trace(struct stack_trace *trace, int spaces);
+
+#ifdef CONFIG_USER_STACKTRACE_SUPPORT
+extern void save_stack_trace_user(struct stack_trace *trace);
+#else
+# define save_stack_trace_user(trace)              do { } while (0)
+#endif
+
+#else
+# define save_stack_trace(trace)			do { } while (0)
+# define save_stack_trace_tsk(tsk, trace)		do { } while (0)
+# define save_stack_trace_user(trace)			do { } while (0)
+# define print_stack_trace(trace, spaces)		do { } while (0)
+#endif
+
+#endif
diff --git a/include/linux/stallion.h b/include/linux/stallion.h
new file mode 100644
index 00000000..336af33c
--- /dev/null
+++ b/include/linux/stallion.h
@@ -0,0 +1,147 @@
+/*****************************************************************************/
+
+/*
+ *	stallion.h  -- stallion multiport serial driver.
+ *
+ *	Copyright (C) 1996-1998  Stallion Technologies
+ *	Copyright (C) 1994-1996  Greg Ungerer.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License
+ *	along with this program; if not, write to the Free Software
+ *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*****************************************************************************/
+#ifndef	_STALLION_H
+#define	_STALLION_H
+/*****************************************************************************/
+
+/*
+ *	Define important driver constants here.
+ */
+#define	STL_MAXBRDS		4
+#define	STL_MAXPANELS		4
+#define	STL_MAXBANKS		8
+#define	STL_PORTSPERPANEL	16
+#define	STL_MAXPORTS		64
+#define	STL_MAXDEVS		(STL_MAXBRDS * STL_MAXPORTS)
+
+
+/*
+ *	Define a set of structures to hold all the board/panel/port info
+ *	for our ports. These will be dynamically allocated as required.
+ */
+
+/*
+ *	Define a ring queue structure for each port. This will hold the
+ *	TX data waiting to be output. Characters are fed into this buffer
+ *	from the line discipline (or even direct from user space!) and
+ *	then fed into the UARTs during interrupts. Will use a classic ring
+ *	queue here for this. The good thing about this type of ring queue
+ *	is that the head and tail pointers can be updated without interrupt
+ *	protection - since "write" code only needs to change the head, and
+ *	interrupt code only needs to change the tail.
+ */
+struct stlrq {
+	char	*buf;
+	char	*head;
+	char	*tail;
+};
+
+/*
+ *	Port, panel and board structures to hold status info about each.
+ *	The board structure contains pointers to structures for each panel
+ *	connected to it, and in turn each panel structure contains pointers
+ *	for each port structure for each port on that panel. Note that
+ *	the port structure also contains the board and panel number that it
+ *	is associated with, this makes it (fairly) easy to get back to the
+ *	board/panel info for a port.
+ */
+struct stlport {
+	unsigned long		magic;
+	struct tty_port		port;
+	unsigned int		portnr;
+	unsigned int		panelnr;
+	unsigned int		brdnr;
+	int			ioaddr;
+	int			uartaddr;
+	unsigned int		pagenr;
+	unsigned long		istate;
+	int			baud_base;
+	int			custom_divisor;
+	int			close_delay;
+	int			closing_wait;
+	int			openwaitcnt;
+	int			brklen;
+	unsigned int		sigs;
+	unsigned int		rxignoremsk;
+	unsigned int		rxmarkmsk;
+	unsigned int		imr;
+	unsigned int		crenable;
+	unsigned long		clk;
+	unsigned long		hwid;
+	void			*uartp;
+	comstats_t		stats;
+	struct stlrq		tx;
+};
+
+struct stlpanel {
+	unsigned long	magic;
+	unsigned int	panelnr;
+	unsigned int	brdnr;
+	unsigned int	pagenr;
+	unsigned int	nrports;
+	int		iobase;
+	void		*uartp;
+	void		(*isr)(struct stlpanel *panelp, unsigned int iobase);
+	unsigned int	hwid;
+	unsigned int	ackmask;
+	struct stlport	*ports[STL_PORTSPERPANEL];
+};
+
+struct stlbrd {
+	unsigned long	magic;
+	unsigned int	brdnr;
+	unsigned int	brdtype;
+	unsigned int	state;
+	unsigned int	nrpanels;
+	unsigned int	nrports;
+	unsigned int	nrbnks;
+	int		irq;
+	int		irqtype;
+	int		(*isr)(struct stlbrd *brdp);
+	unsigned int	ioaddr1;
+	unsigned int	ioaddr2;
+	unsigned int	iosize1;
+	unsigned int	iosize2;
+	unsigned int	iostatus;
+	unsigned int	ioctrl;
+	unsigned int	ioctrlval;
+	unsigned int	hwid;
+	unsigned long	clk;
+	unsigned int	bnkpageaddr[STL_MAXBANKS];
+	unsigned int	bnkstataddr[STL_MAXBANKS];
+	struct stlpanel	*bnk2panel[STL_MAXBANKS];
+	struct stlpanel	*panels[STL_MAXPANELS];
+};
+
+
+/*
+ *	Define MAGIC numbers used for above structures.
+ */
+#define	STL_PORTMAGIC	0x5a7182c9
+#define	STL_PANELMAGIC	0x7ef621a1
+#define	STL_BOARDMAGIC	0xa2267f52
+
+/*****************************************************************************/
+#endif
diff --git a/include/linux/start_kernel.h b/include/linux/start_kernel.h
new file mode 100644
index 00000000..d3e5f275
--- /dev/null
+++ b/include/linux/start_kernel.h
@@ -0,0 +1,12 @@
+#ifndef _LINUX_START_KERNEL_H
+#define _LINUX_START_KERNEL_H
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+/* Define the prototype for start_kernel here, rather than cluttering
+   up something else. */
+
+extern asmlinkage void __init start_kernel(void);
+
+#endif /* _LINUX_START_KERNEL_H */
diff --git a/include/linux/stat.h b/include/linux/stat.h
new file mode 100644
index 00000000..611c398d
--- /dev/null
+++ b/include/linux/stat.h
@@ -0,0 +1,80 @@
+#ifndef _LINUX_STAT_H
+#define _LINUX_STAT_H
+
+#ifdef __KERNEL__
+
+#include <asm/stat.h>
+
+#endif
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#define S_IFMT  00170000
+#define S_IFSOCK 0140000
+#define S_IFLNK	 0120000
+#define S_IFREG  0100000
+#define S_IFBLK  0060000
+#define S_IFDIR  0040000
+#define S_IFCHR  0020000
+#define S_IFIFO  0010000
+#define S_ISUID  0004000
+#define S_ISGID  0002000
+#define S_ISVTX  0001000
+
+#define S_ISLNK(m)	(((m) & S_IFMT) == S_IFLNK)
+#define S_ISREG(m)	(((m) & S_IFMT) == S_IFREG)
+#define S_ISDIR(m)	(((m) & S_IFMT) == S_IFDIR)
+#define S_ISCHR(m)	(((m) & S_IFMT) == S_IFCHR)
+#define S_ISBLK(m)	(((m) & S_IFMT) == S_IFBLK)
+#define S_ISFIFO(m)	(((m) & S_IFMT) == S_IFIFO)
+#define S_ISSOCK(m)	(((m) & S_IFMT) == S_IFSOCK)
+
+#define S_IRWXU 00700
+#define S_IRUSR 00400
+#define S_IWUSR 00200
+#define S_IXUSR 00100
+
+#define S_IRWXG 00070
+#define S_IRGRP 00040
+#define S_IWGRP 00020
+#define S_IXGRP 00010
+
+#define S_IRWXO 00007
+#define S_IROTH 00004
+#define S_IWOTH 00002
+#define S_IXOTH 00001
+
+#endif
+
+#ifdef __KERNEL__
+#define S_IRWXUGO	(S_IRWXU|S_IRWXG|S_IRWXO)
+#define S_IALLUGO	(S_ISUID|S_ISGID|S_ISVTX|S_IRWXUGO)
+#define S_IRUGO		(S_IRUSR|S_IRGRP|S_IROTH)
+#define S_IWUGO		(S_IWUSR|S_IWGRP|S_IWOTH)
+#define S_IXUGO		(S_IXUSR|S_IXGRP|S_IXOTH)
+
+#define UTIME_NOW	((1l << 30) - 1l)
+#define UTIME_OMIT	((1l << 30) - 2l)
+
+#include <linux/types.h>
+#include <linux/time.h>
+
+struct kstat {
+	u64		ino;
+	dev_t		dev;
+	umode_t		mode;
+	unsigned int	nlink;
+	uid_t		uid;
+	gid_t		gid;
+	dev_t		rdev;
+	loff_t		size;
+	struct timespec  atime;
+	struct timespec	mtime;
+	struct timespec	ctime;
+	unsigned long	blksize;
+	unsigned long long	blocks;
+};
+
+#endif
+
+#endif
diff --git a/include/linux/statfs.h b/include/linux/statfs.h
new file mode 100644
index 00000000..0166d320
--- /dev/null
+++ b/include/linux/statfs.h
@@ -0,0 +1,43 @@
+#ifndef _LINUX_STATFS_H
+#define _LINUX_STATFS_H
+
+#include <linux/types.h>
+#include <asm/statfs.h>
+
+struct kstatfs {
+	long f_type;
+	long f_bsize;
+	u64 f_blocks;
+	u64 f_bfree;
+	u64 f_bavail;
+	u64 f_files;
+	u64 f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_flags;
+	long f_spare[4];
+};
+
+/*
+ * Definitions for the flag in f_flag.
+ *
+ * Generally these flags are equivalent to the MS_ flags used in the mount
+ * ABI.  The exception is ST_VALID which has the same value as MS_REMOUNT
+ * which doesn't make any sense for statfs.
+ */
+#define ST_RDONLY	0x0001	/* mount read-only */
+#define ST_NOSUID	0x0002	/* ignore suid and sgid bits */
+#define ST_NODEV	0x0004	/* disallow access to device special files */
+#define ST_NOEXEC	0x0008	/* disallow program execution */
+#define ST_SYNCHRONOUS	0x0010	/* writes are synced at once */
+#define ST_VALID	0x0020	/* f_flags support is implemented */
+#define ST_MANDLOCK	0x0040	/* allow mandatory locks on an FS */
+/* 0x0080 used for ST_WRITE in glibc */
+/* 0x0100 used for ST_APPEND in glibc */
+/* 0x0200 used for ST_IMMUTABLE in glibc */
+#define ST_NOATIME	0x0400	/* do not update access times */
+#define ST_NODIRATIME	0x0800	/* do not update directory access times */
+#define ST_RELATIME	0x1000	/* update atime relative to mtime/ctime */
+
+#endif
diff --git a/include/linux/static_key.h b/include/linux/static_key.h
new file mode 100644
index 00000000..27bd3f8a
--- /dev/null
+++ b/include/linux/static_key.h
@@ -0,0 +1 @@
+#include <linux/jump_label.h>
diff --git a/include/linux/stddef.h b/include/linux/stddef.h
new file mode 100644
index 00000000..1747b678
--- /dev/null
+++ b/include/linux/stddef.h
@@ -0,0 +1,24 @@
+#ifndef _LINUX_STDDEF_H
+#define _LINUX_STDDEF_H
+
+#include <linux/compiler.h>
+
+#ifdef __KERNEL__
+
+#undef NULL
+#define NULL ((void *)0)
+
+enum {
+	false	= 0,
+	true	= 1
+};
+
+#undef offsetof
+#ifdef __compiler_offsetof
+#define offsetof(TYPE,MEMBER) __compiler_offsetof(TYPE,MEMBER)
+#else
+#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
+#endif
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
new file mode 100644
index 00000000..0dddc9e4
--- /dev/null
+++ b/include/linux/stmmac.h
@@ -0,0 +1,61 @@
+/*******************************************************************************
+
+  Header file for stmmac platform data
+
+  Copyright (C) 2009  STMicroelectronics Ltd
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+#ifndef __STMMAC_PLATFORM_DATA
+#define __STMMAC_PLATFORM_DATA
+
+#include <linux/platform_device.h>
+
+/* Platfrom data for platform device structure's platform_data field */
+
+struct stmmac_mdio_bus_data {
+	int bus_id;
+	int (*phy_reset)(void *priv);
+	unsigned int phy_mask;
+	int *irqs;
+	int probed_phy_irq;
+};
+
+struct plat_stmmacenet_data {
+	int bus_id;
+	int phy_addr;
+	int interface;
+	struct stmmac_mdio_bus_data *mdio_bus_data;
+	int pbl;
+	int clk_csr;
+	int has_gmac;
+	int enh_desc;
+	int tx_coe;
+	int bugged_jumbo;
+	int pmt;
+	int force_sf_dma_mode;
+	void (*fix_mac_speed)(void *priv, unsigned int speed);
+	void (*bus_setup)(void __iomem *ioaddr);
+	int (*init)(struct platform_device *pdev);
+	void (*exit)(struct platform_device *pdev);
+	void *custom_cfg;
+	void *bsp_priv;
+};
+#endif
diff --git a/include/linux/stop_machine.h b/include/linux/stop_machine.h
new file mode 100644
index 00000000..3b5e910d
--- /dev/null
+++ b/include/linux/stop_machine.h
@@ -0,0 +1,156 @@
+#ifndef _LINUX_STOP_MACHINE
+#define _LINUX_STOP_MACHINE
+
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
+#include <linux/smp.h>
+#include <linux/list.h>
+
+/*
+ * stop_cpu[s]() is simplistic per-cpu maximum priority cpu
+ * monopolization mechanism.  The caller can specify a non-sleeping
+ * function to be executed on a single or multiple cpus preempting all
+ * other processes and monopolizing those cpus until it finishes.
+ *
+ * Resources for this mechanism are preallocated when a cpu is brought
+ * up and requests are guaranteed to be served as long as the target
+ * cpus are online.
+ */
+typedef int (*cpu_stop_fn_t)(void *arg);
+
+#ifdef CONFIG_SMP
+
+struct cpu_stop_work {
+	struct list_head	list;		/* cpu_stopper->works */
+	cpu_stop_fn_t		fn;
+	void			*arg;
+	struct cpu_stop_done	*done;
+};
+
+int stop_one_cpu(unsigned int cpu, cpu_stop_fn_t fn, void *arg);
+void stop_one_cpu_nowait(unsigned int cpu, cpu_stop_fn_t fn, void *arg,
+			 struct cpu_stop_work *work_buf);
+int stop_cpus(const struct cpumask *cpumask, cpu_stop_fn_t fn, void *arg);
+int try_stop_cpus(const struct cpumask *cpumask, cpu_stop_fn_t fn, void *arg);
+
+#else	/* CONFIG_SMP */
+
+#include <linux/workqueue.h>
+
+struct cpu_stop_work {
+	struct work_struct	work;
+	cpu_stop_fn_t		fn;
+	void			*arg;
+};
+
+static inline int stop_one_cpu(unsigned int cpu, cpu_stop_fn_t fn, void *arg)
+{
+	int ret = -ENOENT;
+	preempt_disable();
+	if (cpu == smp_processor_id())
+		ret = fn(arg);
+	preempt_enable();
+	return ret;
+}
+
+static void stop_one_cpu_nowait_workfn(struct work_struct *work)
+{
+	struct cpu_stop_work *stwork =
+		container_of(work, struct cpu_stop_work, work);
+	preempt_disable();
+	stwork->fn(stwork->arg);
+	preempt_enable();
+}
+
+static inline void stop_one_cpu_nowait(unsigned int cpu,
+				       cpu_stop_fn_t fn, void *arg,
+				       struct cpu_stop_work *work_buf)
+{
+	if (cpu == smp_processor_id()) {
+		INIT_WORK(&work_buf->work, stop_one_cpu_nowait_workfn);
+		work_buf->fn = fn;
+		work_buf->arg = arg;
+		schedule_work(&work_buf->work);
+	}
+}
+
+static inline int stop_cpus(const struct cpumask *cpumask,
+			    cpu_stop_fn_t fn, void *arg)
+{
+	if (cpumask_test_cpu(raw_smp_processor_id(), cpumask))
+		return stop_one_cpu(raw_smp_processor_id(), fn, arg);
+	return -ENOENT;
+}
+
+static inline int try_stop_cpus(const struct cpumask *cpumask,
+				cpu_stop_fn_t fn, void *arg)
+{
+	return stop_cpus(cpumask, fn, arg);
+}
+
+#endif	/* CONFIG_SMP */
+
+/*
+ * stop_machine "Bogolock": stop the entire machine, disable
+ * interrupts.  This is a very heavy lock, which is equivalent to
+ * grabbing every spinlock (and more).  So the "read" side to such a
+ * lock is anything which disables preemption.
+ */
+#if defined(CONFIG_STOP_MACHINE) && defined(CONFIG_SMP)
+
+/**
+ * stop_machine: freeze the machine on all CPUs and run this function
+ * @fn: the function to run
+ * @data: the data ptr for the @fn()
+ * @cpus: the cpus to run the @fn() on (NULL = any online cpu)
+ *
+ * Description: This causes a thread to be scheduled on every cpu,
+ * each of which disables interrupts.  The result is that no one is
+ * holding a spinlock or inside any other preempt-disabled region when
+ * @fn() runs.
+ *
+ * This can be thought of as a very heavy write lock, equivalent to
+ * grabbing every spinlock in the kernel. */
+int stop_machine(int (*fn)(void *), void *data, const struct cpumask *cpus);
+
+/**
+ * __stop_machine: freeze the machine on all CPUs and run this function
+ * @fn: the function to run
+ * @data: the data ptr for the @fn
+ * @cpus: the cpus to run the @fn() on (NULL = any online cpu)
+ *
+ * Description: This is a special version of the above, which assumes cpus
+ * won't come or go while it's being called.  Used by hotplug cpu.
+ */
+int __stop_machine(int (*fn)(void *), void *data, const struct cpumask *cpus);
+
+int stop_machine_from_inactive_cpu(int (*fn)(void *), void *data,
+				   const struct cpumask *cpus);
+
+#else	 /* CONFIG_STOP_MACHINE && CONFIG_SMP */
+
+static inline int __stop_machine(int (*fn)(void *), void *data,
+				 const struct cpumask *cpus)
+{
+	unsigned long flags;
+	int ret;
+	local_irq_save(flags);
+	ret = fn(data);
+	local_irq_restore(flags);
+	return ret;
+}
+
+static inline int stop_machine(int (*fn)(void *), void *data,
+			       const struct cpumask *cpus)
+{
+	return __stop_machine(fn, data, cpus);
+}
+
+static inline int stop_machine_from_inactive_cpu(int (*fn)(void *), void *data,
+						 const struct cpumask *cpus)
+{
+	return __stop_machine(fn, data, cpus);
+}
+
+#endif	/* CONFIG_STOP_MACHINE && CONFIG_SMP */
+#endif	/* _LINUX_STOP_MACHINE */
diff --git a/include/linux/string.h b/include/linux/string.h
new file mode 100644
index 00000000..e033564f
--- /dev/null
+++ b/include/linux/string.h
@@ -0,0 +1,148 @@
+#ifndef _LINUX_STRING_H_
+#define _LINUX_STRING_H_
+
+/* We don't want strings.h stuff being used by user stuff by accident */
+
+#ifndef __KERNEL__
+#include <string.h>
+#else
+
+#include <linux/compiler.h>	/* for inline */
+#include <linux/types.h>	/* for size_t */
+#include <linux/stddef.h>	/* for NULL */
+#include <stdarg.h>
+
+extern char *strndup_user(const char __user *, long);
+extern void *memdup_user(const void __user *, size_t);
+
+/*
+ * Include machine specific inline routines
+ */
+#include <asm/string.h>
+
+#ifndef __HAVE_ARCH_STRCPY
+extern char * strcpy(char *,const char *);
+#endif
+#ifndef __HAVE_ARCH_STRNCPY
+extern char * strncpy(char *,const char *, __kernel_size_t);
+#endif
+#ifndef __HAVE_ARCH_STRLCPY
+size_t strlcpy(char *, const char *, size_t);
+#endif
+#ifndef __HAVE_ARCH_STRCAT
+extern char * strcat(char *, const char *);
+#endif
+#ifndef __HAVE_ARCH_STRNCAT
+extern char * strncat(char *, const char *, __kernel_size_t);
+#endif
+#ifndef __HAVE_ARCH_STRLCAT
+extern size_t strlcat(char *, const char *, __kernel_size_t);
+#endif
+#ifndef __HAVE_ARCH_STRCMP
+extern int strcmp(const char *,const char *);
+#endif
+#ifndef __HAVE_ARCH_STRNCMP
+extern int strncmp(const char *,const char *,__kernel_size_t);
+#endif
+#ifndef __HAVE_ARCH_STRNICMP
+extern int strnicmp(const char *, const char *, __kernel_size_t);
+#endif
+#ifndef __HAVE_ARCH_STRCASECMP
+extern int strcasecmp(const char *s1, const char *s2);
+#endif
+#ifndef __HAVE_ARCH_STRNCASECMP
+extern int strncasecmp(const char *s1, const char *s2, size_t n);
+#endif
+#ifndef __HAVE_ARCH_STRCHR
+extern char * strchr(const char *,int);
+#endif
+#ifndef __HAVE_ARCH_STRNCHR
+extern char * strnchr(const char *, size_t, int);
+#endif
+#ifndef __HAVE_ARCH_STRRCHR
+extern char * strrchr(const char *,int);
+#endif
+extern char * __must_check skip_spaces(const char *);
+
+extern char *strim(char *);
+
+static inline __must_check char *strstrip(char *str)
+{
+	return strim(str);
+}
+
+#ifndef __HAVE_ARCH_STRSTR
+extern char * strstr(const char *, const char *);
+#endif
+#ifndef __HAVE_ARCH_STRNSTR
+extern char * strnstr(const char *, const char *, size_t);
+#endif
+#ifndef __HAVE_ARCH_STRLEN
+extern __kernel_size_t strlen(const char *);
+#endif
+#ifndef __HAVE_ARCH_STRNLEN
+extern __kernel_size_t strnlen(const char *,__kernel_size_t);
+#endif
+#ifndef __HAVE_ARCH_STRPBRK
+extern char * strpbrk(const char *,const char *);
+#endif
+#ifndef __HAVE_ARCH_STRSEP
+extern char * strsep(char **,const char *);
+#endif
+#ifndef __HAVE_ARCH_STRSPN
+extern __kernel_size_t strspn(const char *,const char *);
+#endif
+#ifndef __HAVE_ARCH_STRCSPN
+extern __kernel_size_t strcspn(const char *,const char *);
+#endif
+
+#ifndef __HAVE_ARCH_MEMSET
+extern void * memset(void *,int,__kernel_size_t);
+#endif
+#ifndef __HAVE_ARCH_MEMCPY
+extern void * memcpy(void *,const void *,__kernel_size_t);
+#endif
+#ifndef __HAVE_ARCH_MEMMOVE
+extern void * memmove(void *,const void *,__kernel_size_t);
+#endif
+#ifndef __HAVE_ARCH_MEMSCAN
+extern void * memscan(void *,int,__kernel_size_t);
+#endif
+#ifndef __HAVE_ARCH_MEMCMP
+extern int memcmp(const void *,const void *,__kernel_size_t);
+#endif
+#ifndef __HAVE_ARCH_MEMCHR
+extern void * memchr(const void *,int,__kernel_size_t);
+#endif
+void *memchr_inv(const void *s, int c, size_t n);
+
+extern char *kstrdup(const char *s, gfp_t gfp);
+extern char *kstrndup(const char *s, size_t len, gfp_t gfp);
+extern void *kmemdup(const void *src, size_t len, gfp_t gfp);
+
+extern char **argv_split(gfp_t gfp, const char *str, int *argcp);
+extern void argv_free(char **argv);
+
+extern bool sysfs_streq(const char *s1, const char *s2);
+extern int strtobool(const char *s, bool *res);
+
+#ifdef CONFIG_BINARY_PRINTF
+int vbin_printf(u32 *bin_buf, size_t size, const char *fmt, va_list args);
+int bstr_printf(char *buf, size_t size, const char *fmt, const u32 *bin_buf);
+int bprintf(u32 *bin_buf, size_t size, const char *fmt, ...) __printf(3, 4);
+#endif
+
+extern ssize_t memory_read_from_buffer(void *to, size_t count, loff_t *ppos,
+			const void *from, size_t available);
+
+/**
+ * strstarts - does @str start with @prefix?
+ * @str: string to examine
+ * @prefix: prefix to look for.
+ */
+static inline bool strstarts(const char *str, const char *prefix)
+{
+	return strncmp(str, prefix, strlen(prefix)) == 0;
+}
+#endif
+#endif /* _LINUX_STRING_H_ */
diff --git a/include/linux/string_helpers.h b/include/linux/string_helpers.h
new file mode 100644
index 00000000..a3eb2f65
--- /dev/null
+++ b/include/linux/string_helpers.h
@@ -0,0 +1,16 @@
+#ifndef _LINUX_STRING_HELPERS_H_
+#define _LINUX_STRING_HELPERS_H_
+
+#include <linux/types.h>
+
+/* Descriptions of the types of units to
+ * print in */
+enum string_size_units {
+	STRING_UNITS_10,	/* use powers of 10^3 (standard SI) */
+	STRING_UNITS_2,		/* use binary powers of 2^10 */
+};
+
+int string_get_size(u64 size, enum string_size_units units,
+		    char *buf, int len);
+
+#endif
diff --git a/include/linux/stringify.h b/include/linux/stringify.h
new file mode 100644
index 00000000..841cec8e
--- /dev/null
+++ b/include/linux/stringify.h
@@ -0,0 +1,12 @@
+#ifndef __LINUX_STRINGIFY_H
+#define __LINUX_STRINGIFY_H
+
+/* Indirect stringification.  Doing two levels allows the parameter to be a
+ * macro itself.  For example, compile with -DFOO=bar, __stringify(FOO)
+ * converts to "bar".
+ */
+
+#define __stringify_1(x...)	#x
+#define __stringify(x...)	__stringify_1(x)
+
+#endif	/* !__LINUX_STRINGIFY_H */
diff --git a/include/linux/sungem_phy.h b/include/linux/sungem_phy.h
new file mode 100644
index 00000000..bd9be9f5
--- /dev/null
+++ b/include/linux/sungem_phy.h
@@ -0,0 +1,132 @@
+#ifndef __SUNGEM_PHY_H__
+#define __SUNGEM_PHY_H__
+
+struct mii_phy;
+
+/* Operations supported by any kind of PHY */
+struct mii_phy_ops
+{
+	int		(*init)(struct mii_phy *phy);
+	int		(*suspend)(struct mii_phy *phy);
+	int		(*setup_aneg)(struct mii_phy *phy, u32 advertise);
+	int		(*setup_forced)(struct mii_phy *phy, int speed, int fd);
+	int		(*poll_link)(struct mii_phy *phy);
+	int		(*read_link)(struct mii_phy *phy);
+	int		(*enable_fiber)(struct mii_phy *phy, int autoneg);
+};
+
+/* Structure used to statically define an mii/gii based PHY */
+struct mii_phy_def
+{
+	u32				phy_id;		/* Concatenated ID1 << 16 | ID2 */
+	u32				phy_id_mask;	/* Significant bits */
+	u32				features;	/* Ethtool SUPPORTED_* defines */
+	int				magic_aneg;	/* Autoneg does all speed test for us */
+	const char*			name;
+	const struct mii_phy_ops*	ops;
+};
+
+enum {
+	BCM54XX_COPPER,
+	BCM54XX_FIBER,
+	BCM54XX_GBIC,
+	BCM54XX_SGMII,
+	BCM54XX_UNKNOWN,
+};
+
+/* An instance of a PHY, partially borrowed from mii_if_info */
+struct mii_phy
+{
+	struct mii_phy_def*	def;
+	u32			advertising;
+	int			mii_id;
+
+	/* 1: autoneg enabled, 0: disabled */
+	int			autoneg;
+
+	/* forced speed & duplex (no autoneg)
+	 * partner speed & duplex & pause (autoneg)
+	 */
+	int			speed;
+	int			duplex;
+	int			pause;
+
+	/* Provided by host chip */
+	struct net_device	*dev;
+	int (*mdio_read) (struct net_device *dev, int mii_id, int reg);
+	void (*mdio_write) (struct net_device *dev, int mii_id, int reg, int val);
+	void			*platform_data;
+};
+
+/* Pass in a struct mii_phy with dev, mdio_read and mdio_write
+ * filled, the remaining fields will be filled on return
+ */
+extern int sungem_phy_probe(struct mii_phy *phy, int mii_id);
+
+
+/* MII definitions missing from mii.h */
+
+#define BMCR_SPD2	0x0040		/* Gigabit enable (bcm54xx)	*/
+#define LPA_PAUSE	0x0400
+
+/* More PHY registers (model specific) */
+
+/* MII BCM5201 MULTIPHY interrupt register */
+#define MII_BCM5201_INTERRUPT			0x1A
+#define MII_BCM5201_INTERRUPT_INTENABLE		0x4000
+
+#define MII_BCM5201_AUXMODE2			0x1B
+#define MII_BCM5201_AUXMODE2_LOWPOWER		0x0008
+
+#define MII_BCM5201_MULTIPHY                    0x1E
+
+/* MII BCM5201 MULTIPHY register bits */
+#define MII_BCM5201_MULTIPHY_SERIALMODE         0x0002
+#define MII_BCM5201_MULTIPHY_SUPERISOLATE       0x0008
+
+/* MII BCM5221 Additional registers */
+#define MII_BCM5221_TEST			0x1f
+#define MII_BCM5221_TEST_ENABLE_SHADOWS		0x0080
+#define MII_BCM5221_SHDOW_AUX_STAT2		0x1b
+#define MII_BCM5221_SHDOW_AUX_STAT2_APD		0x0020
+#define MII_BCM5221_SHDOW_AUX_MODE4		0x1a
+#define MII_BCM5221_SHDOW_AUX_MODE4_IDDQMODE	0x0001
+#define MII_BCM5221_SHDOW_AUX_MODE4_CLKLOPWR	0x0004
+
+/* MII BCM5241 Additional registers */
+#define MII_BCM5241_SHDOW_AUX_MODE4_STANDBYPWR	0x0008
+
+/* MII BCM5400 1000-BASET Control register */
+#define MII_BCM5400_GB_CONTROL			0x09
+#define MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP	0x0200
+
+/* MII BCM5400 AUXCONTROL register */
+#define MII_BCM5400_AUXCONTROL                  0x18
+#define MII_BCM5400_AUXCONTROL_PWR10BASET       0x0004
+
+/* MII BCM5400 AUXSTATUS register */
+#define MII_BCM5400_AUXSTATUS                   0x19
+#define MII_BCM5400_AUXSTATUS_LINKMODE_MASK     0x0700
+#define MII_BCM5400_AUXSTATUS_LINKMODE_SHIFT    8
+
+/* 1000BT control (Marvell & BCM54xx at least) */
+#define MII_1000BASETCONTROL			0x09
+#define MII_1000BASETCONTROL_FULLDUPLEXCAP	0x0200
+#define MII_1000BASETCONTROL_HALFDUPLEXCAP	0x0100
+
+/* Marvell 88E1011 PHY control */
+#define MII_M1011_PHY_SPEC_CONTROL		0x10
+#define MII_M1011_PHY_SPEC_CONTROL_MANUAL_MDIX	0x20
+#define MII_M1011_PHY_SPEC_CONTROL_AUTO_MDIX	0x40
+
+/* Marvell 88E1011 PHY status */
+#define MII_M1011_PHY_SPEC_STATUS		0x11
+#define MII_M1011_PHY_SPEC_STATUS_1000		0x8000
+#define MII_M1011_PHY_SPEC_STATUS_100		0x4000
+#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK	0xc000
+#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX	0x2000
+#define MII_M1011_PHY_SPEC_STATUS_RESOLVED	0x0800
+#define MII_M1011_PHY_SPEC_STATUS_TX_PAUSE	0x0008
+#define MII_M1011_PHY_SPEC_STATUS_RX_PAUSE	0x0004
+
+#endif /* __SUNGEM_PHY_H__ */
diff --git a/include/linux/sunrpc/Kbuild b/include/linux/sunrpc/Kbuild
new file mode 100644
index 00000000..98df2116
--- /dev/null
+++ b/include/linux/sunrpc/Kbuild
@@ -0,0 +1 @@
+header-y += debug.h
diff --git a/include/linux/sunrpc/auth.h b/include/linux/sunrpc/auth.h
new file mode 100644
index 00000000..492a36d7
--- /dev/null
+++ b/include/linux/sunrpc/auth.h
@@ -0,0 +1,162 @@
+/*
+ * linux/include/linux/sunrpc/auth.h
+ *
+ * Declarations for the RPC client authentication machinery.
+ *
+ * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef _LINUX_SUNRPC_AUTH_H
+#define _LINUX_SUNRPC_AUTH_H
+
+#ifdef __KERNEL__
+
+#include <linux/sunrpc/sched.h>
+#include <linux/sunrpc/msg_prot.h>
+#include <linux/sunrpc/xdr.h>
+
+#include <linux/atomic.h>
+#include <linux/rcupdate.h>
+
+/* size of the nodename buffer */
+#define UNX_MAXNODENAME	32
+
+/* Work around the lack of a VFS credential */
+struct auth_cred {
+	uid_t	uid;
+	gid_t	gid;
+	struct group_info *group_info;
+	const char *principal;
+	unsigned char machine_cred : 1;
+};
+
+/*
+ * Client user credentials
+ */
+struct rpc_auth;
+struct rpc_credops;
+struct rpc_cred {
+	struct hlist_node	cr_hash;	/* hash chain */
+	struct list_head	cr_lru;		/* lru garbage collection */
+	struct rcu_head		cr_rcu;
+	struct rpc_auth *	cr_auth;
+	const struct rpc_credops *cr_ops;
+#ifdef RPC_DEBUG
+	unsigned long		cr_magic;	/* 0x0f4aa4f0 */
+#endif
+	unsigned long		cr_expire;	/* when to gc */
+	unsigned long		cr_flags;	/* various flags */
+	atomic_t		cr_count;	/* ref count */
+
+	uid_t			cr_uid;
+
+	/* per-flavor data */
+};
+#define RPCAUTH_CRED_NEW	0
+#define RPCAUTH_CRED_UPTODATE	1
+#define RPCAUTH_CRED_HASHED	2
+#define RPCAUTH_CRED_NEGATIVE	3
+
+#define RPCAUTH_CRED_MAGIC	0x0f4aa4f0
+
+/*
+ * Client authentication handle
+ */
+struct rpc_cred_cache;
+struct rpc_authops;
+struct rpc_auth {
+	unsigned int		au_cslack;	/* call cred size estimate */
+				/* guess at number of u32's auth adds before
+				 * reply data; normally the verifier size: */
+	unsigned int		au_rslack;
+				/* for gss, used to calculate au_rslack: */
+	unsigned int		au_verfsize;
+
+	unsigned int		au_flags;	/* various flags */
+	const struct rpc_authops *au_ops;		/* operations */
+	rpc_authflavor_t	au_flavor;	/* pseudoflavor (note may
+						 * differ from the flavor in
+						 * au_ops->au_flavor in gss
+						 * case) */
+	atomic_t		au_count;	/* Reference counter */
+
+	struct rpc_cred_cache *	au_credcache;
+	/* per-flavor data */
+};
+
+/* Flags for rpcauth_lookupcred() */
+#define RPCAUTH_LOOKUP_NEW		0x01	/* Accept an uninitialised cred */
+
+/*
+ * Client authentication ops
+ */
+struct rpc_authops {
+	struct module		*owner;
+	rpc_authflavor_t	au_flavor;	/* flavor (RPC_AUTH_*) */
+	char *			au_name;
+	struct rpc_auth *	(*create)(struct rpc_clnt *, rpc_authflavor_t);
+	void			(*destroy)(struct rpc_auth *);
+
+	struct rpc_cred *	(*lookup_cred)(struct rpc_auth *, struct auth_cred *, int);
+	struct rpc_cred *	(*crcreate)(struct rpc_auth*, struct auth_cred *, int);
+	int			(*pipes_create)(struct rpc_auth *);
+	void			(*pipes_destroy)(struct rpc_auth *);
+};
+
+struct rpc_credops {
+	const char *		cr_name;	/* Name of the auth flavour */
+	int			(*cr_init)(struct rpc_auth *, struct rpc_cred *);
+	void			(*crdestroy)(struct rpc_cred *);
+
+	int			(*crmatch)(struct auth_cred *, struct rpc_cred *, int);
+	struct rpc_cred *	(*crbind)(struct rpc_task *, struct rpc_cred *, int);
+	__be32 *		(*crmarshal)(struct rpc_task *, __be32 *);
+	int			(*crrefresh)(struct rpc_task *);
+	__be32 *		(*crvalidate)(struct rpc_task *, __be32 *);
+	int			(*crwrap_req)(struct rpc_task *, kxdreproc_t,
+						void *, __be32 *, void *);
+	int			(*crunwrap_resp)(struct rpc_task *, kxdrdproc_t,
+						void *, __be32 *, void *);
+};
+
+extern const struct rpc_authops	authunix_ops;
+extern const struct rpc_authops	authnull_ops;
+
+int __init		rpc_init_authunix(void);
+int __init		rpc_init_generic_auth(void);
+int __init		rpcauth_init_module(void);
+void			rpcauth_remove_module(void);
+void			rpc_destroy_generic_auth(void);
+void 			rpc_destroy_authunix(void);
+
+struct rpc_cred *	rpc_lookup_cred(void);
+struct rpc_cred *	rpc_lookup_machine_cred(const char *service_name);
+int			rpcauth_register(const struct rpc_authops *);
+int			rpcauth_unregister(const struct rpc_authops *);
+struct rpc_auth *	rpcauth_create(rpc_authflavor_t, struct rpc_clnt *);
+void			rpcauth_release(struct rpc_auth *);
+struct rpc_cred *	rpcauth_lookup_credcache(struct rpc_auth *, struct auth_cred *, int);
+void			rpcauth_init_cred(struct rpc_cred *, const struct auth_cred *, struct rpc_auth *, const struct rpc_credops *);
+struct rpc_cred *	rpcauth_lookupcred(struct rpc_auth *, int);
+struct rpc_cred *	rpcauth_generic_bind_cred(struct rpc_task *, struct rpc_cred *, int);
+void			put_rpccred(struct rpc_cred *);
+__be32 *		rpcauth_marshcred(struct rpc_task *, __be32 *);
+__be32 *		rpcauth_checkverf(struct rpc_task *, __be32 *);
+int			rpcauth_wrap_req(struct rpc_task *task, kxdreproc_t encode, void *rqstp, __be32 *data, void *obj);
+int			rpcauth_unwrap_resp(struct rpc_task *task, kxdrdproc_t decode, void *rqstp, __be32 *data, void *obj);
+int			rpcauth_refreshcred(struct rpc_task *);
+void			rpcauth_invalcred(struct rpc_task *);
+int			rpcauth_uptodatecred(struct rpc_task *);
+int			rpcauth_init_credcache(struct rpc_auth *);
+void			rpcauth_destroy_credcache(struct rpc_auth *);
+void			rpcauth_clear_credcache(struct rpc_cred_cache *);
+
+static inline
+struct rpc_cred *	get_rpccred(struct rpc_cred *cred)
+{
+	atomic_inc(&cred->cr_count);
+	return cred;
+}
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_SUNRPC_AUTH_H */
diff --git a/include/linux/sunrpc/auth_gss.h b/include/linux/sunrpc/auth_gss.h
new file mode 100644
index 00000000..f1cfd4c8
--- /dev/null
+++ b/include/linux/sunrpc/auth_gss.h
@@ -0,0 +1,91 @@
+/*
+ * linux/include/linux/sunrpc/auth_gss.h
+ *
+ * Declarations for RPCSEC_GSS
+ *
+ * Dug Song <dugsong@monkey.org>
+ * Andy Adamson <andros@umich.edu>
+ * Bruce Fields <bfields@umich.edu>
+ * Copyright (c) 2000 The Regents of the University of Michigan
+ */
+
+#ifndef _LINUX_SUNRPC_AUTH_GSS_H
+#define _LINUX_SUNRPC_AUTH_GSS_H
+
+#ifdef __KERNEL__
+#include <linux/sunrpc/auth.h>
+#include <linux/sunrpc/svc.h>
+#include <linux/sunrpc/gss_api.h>
+
+#define RPC_GSS_VERSION		1
+
+#define MAXSEQ 0x80000000 /* maximum legal sequence number, from rfc 2203 */
+
+enum rpc_gss_proc {
+	RPC_GSS_PROC_DATA = 0,
+	RPC_GSS_PROC_INIT = 1,
+	RPC_GSS_PROC_CONTINUE_INIT = 2,
+	RPC_GSS_PROC_DESTROY = 3
+};
+
+enum rpc_gss_svc {
+	RPC_GSS_SVC_NONE = 1,
+	RPC_GSS_SVC_INTEGRITY = 2,
+	RPC_GSS_SVC_PRIVACY = 3
+};
+
+/* on-the-wire gss cred: */
+struct rpc_gss_wire_cred {
+	u32			gc_v;		/* version */
+	u32			gc_proc;	/* control procedure */
+	u32			gc_seq;		/* sequence number */
+	u32			gc_svc;		/* service */
+	struct xdr_netobj	gc_ctx;		/* context handle */
+};
+
+/* on-the-wire gss verifier: */
+struct rpc_gss_wire_verf {
+	u32			gv_flavor;
+	struct xdr_netobj	gv_verf;
+};
+
+/* return from gss NULL PROC init sec context */
+struct rpc_gss_init_res {
+	struct xdr_netobj	gr_ctx;		/* context handle */
+	u32			gr_major;	/* major status */
+	u32			gr_minor;	/* minor status */
+	u32			gr_win;		/* sequence window */
+	struct xdr_netobj	gr_token;	/* token */
+};
+
+/* The gss_cl_ctx struct holds all the information the rpcsec_gss client
+ * code needs to know about a single security context.  In particular,
+ * gc_gss_ctx is the context handle that is used to do gss-api calls, while
+ * gc_wire_ctx is the context handle that is used to identify the context on
+ * the wire when communicating with a server. */
+
+struct gss_cl_ctx {
+	atomic_t		count;
+	enum rpc_gss_proc	gc_proc;
+	u32			gc_seq;
+	spinlock_t		gc_seq_lock;
+	struct gss_ctx __rcu	*gc_gss_ctx;
+	struct xdr_netobj	gc_wire_ctx;
+	u32			gc_win;
+	unsigned long		gc_expiry;
+	struct rcu_head		gc_rcu;
+};
+
+struct gss_upcall_msg;
+struct gss_cred {
+	struct rpc_cred		gc_base;
+	enum rpc_gss_svc	gc_service;
+	struct gss_cl_ctx __rcu	*gc_ctx;
+	struct gss_upcall_msg	*gc_upcall;
+	const char		*gc_principal;
+	unsigned long		gc_upcall_timestamp;
+};
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_SUNRPC_AUTH_GSS_H */
+
diff --git a/include/linux/sunrpc/bc_xprt.h b/include/linux/sunrpc/bc_xprt.h
new file mode 100644
index 00000000..969c0a67
--- /dev/null
+++ b/include/linux/sunrpc/bc_xprt.h
@@ -0,0 +1,67 @@
+/******************************************************************************
+
+(c) 2008 NetApp.  All Rights Reserved.
+
+NetApp provides this source code under the GPL v2 License.
+The GPL v2 license is available at
+http://opensource.org/licenses/gpl-license.php.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+******************************************************************************/
+
+/*
+ * Functions to create and manage the backchannel
+ */
+
+#ifndef _LINUX_SUNRPC_BC_XPRT_H
+#define _LINUX_SUNRPC_BC_XPRT_H
+
+#include <linux/sunrpc/svcsock.h>
+#include <linux/sunrpc/xprt.h>
+#include <linux/sunrpc/sched.h>
+
+#ifdef CONFIG_SUNRPC_BACKCHANNEL
+struct rpc_rqst *xprt_alloc_bc_request(struct rpc_xprt *xprt);
+void xprt_free_bc_request(struct rpc_rqst *req);
+int xprt_setup_backchannel(struct rpc_xprt *, unsigned int min_reqs);
+void xprt_destroy_backchannel(struct rpc_xprt *, unsigned int max_reqs);
+int bc_send(struct rpc_rqst *req);
+
+/*
+ * Determine if a shared backchannel is in use
+ */
+static inline int svc_is_backchannel(const struct svc_rqst *rqstp)
+{
+	if (rqstp->rq_server->sv_bc_xprt)
+		return 1;
+	return 0;
+}
+#else /* CONFIG_SUNRPC_BACKCHANNEL */
+static inline int xprt_setup_backchannel(struct rpc_xprt *xprt,
+					 unsigned int min_reqs)
+{
+	return 0;
+}
+
+static inline int svc_is_backchannel(const struct svc_rqst *rqstp)
+{
+	return 0;
+}
+
+static inline void xprt_free_bc_request(struct rpc_rqst *req)
+{
+}
+#endif /* CONFIG_SUNRPC_BACKCHANNEL */
+#endif /* _LINUX_SUNRPC_BC_XPRT_H */
+
diff --git a/include/linux/sunrpc/cache.h b/include/linux/sunrpc/cache.h
new file mode 100644
index 00000000..f5fd6160
--- /dev/null
+++ b/include/linux/sunrpc/cache.h
@@ -0,0 +1,263 @@
+/*
+ * include/linux/sunrpc/cache.h
+ *
+ * Generic code for various authentication-related caches
+ * used by sunrpc clients and servers.
+ *
+ * Copyright (C) 2002 Neil Brown <neilb@cse.unsw.edu.au>
+ *
+ * Released under terms in GPL version 2.  See COPYING.
+ *
+ */
+
+#ifndef _LINUX_SUNRPC_CACHE_H_
+#define _LINUX_SUNRPC_CACHE_H_
+
+#include <linux/kref.h>
+#include <linux/slab.h>
+#include <linux/atomic.h>
+#include <linux/proc_fs.h>
+
+/*
+ * Each cache requires:
+ *  - A 'struct cache_detail' which contains information specific to the cache
+ *    for common code to use.
+ *  - An item structure that must contain a "struct cache_head"
+ *  - A lookup function defined using DefineCacheLookup
+ *  - A 'put' function that can release a cache item. It will only
+ *    be called after cache_put has succeed, so there are guarantee
+ *    to be no references.
+ *  - A function to calculate a hash of an item's key.
+ *
+ * as well as assorted code fragments (e.g. compare keys) and numbers
+ * (e.g. hash size, goal_age, etc).
+ *
+ * Each cache must be registered so that it can be cleaned regularly.
+ * When the cache is unregistered, it is flushed completely.
+ *
+ * Entries have a ref count and a 'hashed' flag which counts the existence
+ * in the hash table.
+ * We only expire entries when refcount is zero.
+ * Existence in the cache is counted  the refcount.
+ */
+
+/* Every cache item has a common header that is used
+ * for expiring and refreshing entries.
+ * 
+ */
+struct cache_head {
+	struct cache_head * next;
+	time_t		expiry_time;	/* After time time, don't use the data */
+	time_t		last_refresh;   /* If CACHE_PENDING, this is when upcall 
+					 * was sent, else this is when update was received
+					 */
+	struct kref	ref;
+	unsigned long	flags;
+};
+#define	CACHE_VALID	0	/* Entry contains valid data */
+#define	CACHE_NEGATIVE	1	/* Negative entry - there is no match for the key */
+#define	CACHE_PENDING	2	/* An upcall has been sent but no reply received yet*/
+
+#define	CACHE_NEW_EXPIRY 120	/* keep new things pending confirmation for 120 seconds */
+
+struct cache_detail_procfs {
+	struct proc_dir_entry	*proc_ent;
+	struct proc_dir_entry   *flush_ent, *channel_ent, *content_ent;
+};
+
+struct cache_detail_pipefs {
+	struct dentry *dir;
+};
+
+struct cache_detail {
+	struct module *		owner;
+	int			hash_size;
+	struct cache_head **	hash_table;
+	rwlock_t		hash_lock;
+
+	atomic_t		inuse; /* active user-space update or lookup */
+
+	char			*name;
+	void			(*cache_put)(struct kref *);
+
+	int			(*cache_upcall)(struct cache_detail *,
+						struct cache_head *);
+
+	int			(*cache_parse)(struct cache_detail *,
+					       char *buf, int len);
+
+	int			(*cache_show)(struct seq_file *m,
+					      struct cache_detail *cd,
+					      struct cache_head *h);
+	void			(*warn_no_listener)(struct cache_detail *cd,
+					      int has_died);
+
+	struct cache_head *	(*alloc)(void);
+	int			(*match)(struct cache_head *orig, struct cache_head *new);
+	void			(*init)(struct cache_head *orig, struct cache_head *new);
+	void			(*update)(struct cache_head *orig, struct cache_head *new);
+
+	/* fields below this comment are for internal use
+	 * and should not be touched by cache owners
+	 */
+	time_t			flush_time;		/* flush all cache items with last_refresh
+							 * earlier than this */
+	struct list_head	others;
+	time_t			nextcheck;
+	int			entries;
+
+	/* fields for communication over channel */
+	struct list_head	queue;
+
+	atomic_t		readers;		/* how many time is /chennel open */
+	time_t			last_close;		/* if no readers, when did last close */
+	time_t			last_warn;		/* when we last warned about no readers */
+
+	union {
+		struct cache_detail_procfs procfs;
+		struct cache_detail_pipefs pipefs;
+	} u;
+	struct net		*net;
+};
+
+
+/* this must be embedded in any request structure that
+ * identifies an object that will want a callback on
+ * a cache fill
+ */
+struct cache_req {
+	struct cache_deferred_req *(*defer)(struct cache_req *req);
+	int thread_wait;  /* How long (jiffies) we can block the
+			   * current thread to wait for updates.
+			   */
+};
+/* this must be embedded in a deferred_request that is being
+ * delayed awaiting cache-fill
+ */
+struct cache_deferred_req {
+	struct hlist_node	hash;	/* on hash chain */
+	struct list_head	recent; /* on fifo */
+	struct cache_head	*item;  /* cache item we wait on */
+	void			*owner; /* we might need to discard all defered requests
+					 * owned by someone */
+	void			(*revisit)(struct cache_deferred_req *req,
+					   int too_many);
+};
+
+
+extern const struct file_operations cache_file_operations_pipefs;
+extern const struct file_operations content_file_operations_pipefs;
+extern const struct file_operations cache_flush_operations_pipefs;
+
+extern struct cache_head *
+sunrpc_cache_lookup(struct cache_detail *detail,
+		    struct cache_head *key, int hash);
+extern struct cache_head *
+sunrpc_cache_update(struct cache_detail *detail,
+		    struct cache_head *new, struct cache_head *old, int hash);
+
+extern int
+sunrpc_cache_pipe_upcall(struct cache_detail *detail, struct cache_head *h,
+		void (*cache_request)(struct cache_detail *,
+				      struct cache_head *,
+				      char **,
+				      int *));
+
+
+extern void cache_clean_deferred(void *owner);
+
+static inline struct cache_head  *cache_get(struct cache_head *h)
+{
+	kref_get(&h->ref);
+	return h;
+}
+
+
+static inline void cache_put(struct cache_head *h, struct cache_detail *cd)
+{
+	if (atomic_read(&h->ref.refcount) <= 2 &&
+	    h->expiry_time < cd->nextcheck)
+		cd->nextcheck = h->expiry_time;
+	kref_put(&h->ref, cd->cache_put);
+}
+
+static inline int cache_valid(struct cache_head *h)
+{
+	/* If an item has been unhashed pending removal when
+	 * the refcount drops to 0, the expiry_time will be
+	 * set to 0.  We don't want to consider such items
+	 * valid in this context even though CACHE_VALID is
+	 * set.
+	 */
+	return (h->expiry_time != 0 && test_bit(CACHE_VALID, &h->flags));
+}
+
+extern int cache_check(struct cache_detail *detail,
+		       struct cache_head *h, struct cache_req *rqstp);
+extern void cache_flush(void);
+extern void cache_purge(struct cache_detail *detail);
+#define NEVER (0x7FFFFFFF)
+extern void __init cache_initialize(void);
+extern int cache_register_net(struct cache_detail *cd, struct net *net);
+extern void cache_unregister_net(struct cache_detail *cd, struct net *net);
+
+extern struct cache_detail *cache_create_net(struct cache_detail *tmpl, struct net *net);
+extern void cache_destroy_net(struct cache_detail *cd, struct net *net);
+
+extern void sunrpc_init_cache_detail(struct cache_detail *cd);
+extern void sunrpc_destroy_cache_detail(struct cache_detail *cd);
+extern int sunrpc_cache_register_pipefs(struct dentry *parent, const char *,
+					umode_t, struct cache_detail *);
+extern void sunrpc_cache_unregister_pipefs(struct cache_detail *);
+
+extern void qword_add(char **bpp, int *lp, char *str);
+extern void qword_addhex(char **bpp, int *lp, char *buf, int blen);
+extern int qword_get(char **bpp, char *dest, int bufsize);
+
+static inline int get_int(char **bpp, int *anint)
+{
+	char buf[50];
+	char *ep;
+	int rv;
+	int len = qword_get(bpp, buf, 50);
+	if (len < 0) return -EINVAL;
+	if (len ==0) return -ENOENT;
+	rv = simple_strtol(buf, &ep, 0);
+	if (*ep) return -EINVAL;
+	*anint = rv;
+	return 0;
+}
+
+/*
+ * timestamps kept in the cache are expressed in seconds
+ * since boot.  This is the best for measuring differences in
+ * real time.
+ */
+static inline time_t seconds_since_boot(void)
+{
+	struct timespec boot;
+	getboottime(&boot);
+	return get_seconds() - boot.tv_sec;
+}
+
+static inline time_t convert_to_wallclock(time_t sinceboot)
+{
+	struct timespec boot;
+	getboottime(&boot);
+	return boot.tv_sec + sinceboot;
+}
+
+static inline time_t get_expiry(char **bpp)
+{
+	int rv;
+	struct timespec boot;
+
+	if (get_int(bpp, &rv))
+		return 0;
+	if (rv < 0)
+		return 0;
+	getboottime(&boot);
+	return rv - boot.tv_sec;
+}
+
+#endif /*  _LINUX_SUNRPC_CACHE_H_ */
diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h
new file mode 100644
index 00000000..523547ec
--- /dev/null
+++ b/include/linux/sunrpc/clnt.h
@@ -0,0 +1,319 @@
+/*
+ *  linux/include/linux/sunrpc/clnt.h
+ *
+ *  Declarations for the high-level RPC client interface
+ *
+ *  Copyright (C) 1995, 1996, Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef _LINUX_SUNRPC_CLNT_H
+#define _LINUX_SUNRPC_CLNT_H
+
+#include <linux/types.h>
+#include <linux/socket.h>
+#include <linux/in.h>
+#include <linux/in6.h>
+
+#include <linux/sunrpc/msg_prot.h>
+#include <linux/sunrpc/sched.h>
+#include <linux/sunrpc/xprt.h>
+#include <linux/sunrpc/auth.h>
+#include <linux/sunrpc/stats.h>
+#include <linux/sunrpc/xdr.h>
+#include <linux/sunrpc/timer.h>
+#include <asm/signal.h>
+#include <linux/path.h>
+#include <net/ipv6.h>
+
+struct rpc_inode;
+
+/*
+ * The high-level client handle
+ */
+struct rpc_clnt {
+	atomic_t		cl_count;	/* Number of references */
+	struct list_head	cl_clients;	/* Global list of clients */
+	struct list_head	cl_tasks;	/* List of tasks */
+	spinlock_t		cl_lock;	/* spinlock */
+	struct rpc_xprt __rcu *	cl_xprt;	/* transport */
+	struct rpc_procinfo *	cl_procinfo;	/* procedure info */
+	u32			cl_prog,	/* RPC program number */
+				cl_vers,	/* RPC version number */
+				cl_maxproc;	/* max procedure number */
+
+	const char *		cl_protname;	/* protocol name */
+	struct rpc_auth *	cl_auth;	/* authenticator */
+	struct rpc_stat *	cl_stats;	/* per-program statistics */
+	struct rpc_iostats *	cl_metrics;	/* per-client statistics */
+
+	unsigned int		cl_softrtry : 1,/* soft timeouts */
+				cl_discrtry : 1,/* disconnect before retry */
+				cl_autobind : 1,/* use getport() */
+				cl_chatty   : 1;/* be verbose */
+
+	struct rpc_rtt *	cl_rtt;		/* RTO estimator data */
+	const struct rpc_timeout *cl_timeout;	/* Timeout strategy */
+
+	int			cl_nodelen;	/* nodename length */
+	char 			cl_nodename[UNX_MAXNODENAME];
+	struct dentry *		cl_dentry;
+	struct rpc_clnt *	cl_parent;	/* Points to parent of clones */
+	struct rpc_rtt		cl_rtt_default;
+	struct rpc_timeout	cl_timeout_default;
+	const struct rpc_program *cl_program;
+	char			*cl_principal;	/* target to authenticate to */
+};
+
+/*
+ * General RPC program info
+ */
+#define RPC_MAXVERSION		4
+struct rpc_program {
+	const char *		name;		/* protocol name */
+	u32			number;		/* program number */
+	unsigned int		nrvers;		/* number of versions */
+	const struct rpc_version **	version;	/* version array */
+	struct rpc_stat *	stats;		/* statistics */
+	const char *		pipe_dir_name;	/* path to rpc_pipefs dir */
+};
+
+struct rpc_version {
+	u32			number;		/* version number */
+	unsigned int		nrprocs;	/* number of procs */
+	struct rpc_procinfo *	procs;		/* procedure array */
+};
+
+/*
+ * Procedure information
+ */
+struct rpc_procinfo {
+	u32			p_proc;		/* RPC procedure number */
+	kxdreproc_t		p_encode;	/* XDR encode function */
+	kxdrdproc_t		p_decode;	/* XDR decode function */
+	unsigned int		p_arglen;	/* argument hdr length (u32) */
+	unsigned int		p_replen;	/* reply hdr length (u32) */
+	unsigned int		p_count;	/* call count */
+	unsigned int		p_timer;	/* Which RTT timer to use */
+	u32			p_statidx;	/* Which procedure to account */
+	const char *		p_name;		/* name of procedure */
+};
+
+#ifdef __KERNEL__
+
+struct rpc_create_args {
+	struct net		*net;
+	int			protocol;
+	struct sockaddr		*address;
+	size_t			addrsize;
+	struct sockaddr		*saddress;
+	const struct rpc_timeout *timeout;
+	const char		*servername;
+	const struct rpc_program *program;
+	u32			prognumber;	/* overrides program->number */
+	u32			version;
+	rpc_authflavor_t	authflavor;
+	unsigned long		flags;
+	char			*client_name;
+	struct svc_xprt		*bc_xprt;	/* NFSv4.1 backchannel */
+};
+
+/* Values for "flags" field */
+#define RPC_CLNT_CREATE_HARDRTRY	(1UL << 0)
+#define RPC_CLNT_CREATE_AUTOBIND	(1UL << 2)
+#define RPC_CLNT_CREATE_NONPRIVPORT	(1UL << 3)
+#define RPC_CLNT_CREATE_NOPING		(1UL << 4)
+#define RPC_CLNT_CREATE_DISCRTRY	(1UL << 5)
+#define RPC_CLNT_CREATE_QUIET		(1UL << 6)
+
+struct rpc_clnt *rpc_create(struct rpc_create_args *args);
+struct rpc_clnt	*rpc_bind_new_program(struct rpc_clnt *,
+				const struct rpc_program *, u32);
+void rpc_task_reset_client(struct rpc_task *task, struct rpc_clnt *clnt);
+struct rpc_clnt *rpc_clone_client(struct rpc_clnt *);
+void		rpc_shutdown_client(struct rpc_clnt *);
+void		rpc_release_client(struct rpc_clnt *);
+void		rpc_task_release_client(struct rpc_task *);
+
+int		rpcb_create_local(struct net *);
+void		rpcb_put_local(struct net *);
+int		rpcb_register(struct net *, u32, u32, int, unsigned short);
+int		rpcb_v4_register(struct net *net, const u32 program,
+				 const u32 version,
+				 const struct sockaddr *address,
+				 const char *netid);
+void		rpcb_getport_async(struct rpc_task *);
+
+void		rpc_call_start(struct rpc_task *);
+int		rpc_call_async(struct rpc_clnt *clnt,
+			       const struct rpc_message *msg, int flags,
+			       const struct rpc_call_ops *tk_ops,
+			       void *calldata);
+int		rpc_call_sync(struct rpc_clnt *clnt,
+			      const struct rpc_message *msg, int flags);
+struct rpc_task *rpc_call_null(struct rpc_clnt *clnt, struct rpc_cred *cred,
+			       int flags);
+int		rpc_restart_call_prepare(struct rpc_task *);
+int		rpc_restart_call(struct rpc_task *);
+void		rpc_setbufsize(struct rpc_clnt *, unsigned int, unsigned int);
+int		rpc_protocol(struct rpc_clnt *);
+struct net *	rpc_net_ns(struct rpc_clnt *);
+size_t		rpc_max_payload(struct rpc_clnt *);
+void		rpc_force_rebind(struct rpc_clnt *);
+size_t		rpc_peeraddr(struct rpc_clnt *, struct sockaddr *, size_t);
+const char	*rpc_peeraddr2str(struct rpc_clnt *, enum rpc_display_format_t);
+int		rpc_localaddr(struct rpc_clnt *, struct sockaddr *, size_t);
+
+size_t		rpc_ntop(const struct sockaddr *, char *, const size_t);
+size_t		rpc_pton(struct net *, const char *, const size_t,
+			 struct sockaddr *, const size_t);
+char *		rpc_sockaddr2uaddr(const struct sockaddr *, gfp_t);
+size_t		rpc_uaddr2sockaddr(struct net *, const char *, const size_t,
+				   struct sockaddr *, const size_t);
+
+static inline unsigned short rpc_get_port(const struct sockaddr *sap)
+{
+	switch (sap->sa_family) {
+	case AF_INET:
+		return ntohs(((struct sockaddr_in *)sap)->sin_port);
+	case AF_INET6:
+		return ntohs(((struct sockaddr_in6 *)sap)->sin6_port);
+	}
+	return 0;
+}
+
+static inline void rpc_set_port(struct sockaddr *sap,
+				const unsigned short port)
+{
+	switch (sap->sa_family) {
+	case AF_INET:
+		((struct sockaddr_in *)sap)->sin_port = htons(port);
+		break;
+	case AF_INET6:
+		((struct sockaddr_in6 *)sap)->sin6_port = htons(port);
+		break;
+	}
+}
+
+#define IPV6_SCOPE_DELIMITER		'%'
+#define IPV6_SCOPE_ID_LEN		sizeof("%nnnnnnnnnn")
+
+static inline bool __rpc_cmp_addr4(const struct sockaddr *sap1,
+				   const struct sockaddr *sap2)
+{
+	const struct sockaddr_in *sin1 = (const struct sockaddr_in *)sap1;
+	const struct sockaddr_in *sin2 = (const struct sockaddr_in *)sap2;
+
+	return sin1->sin_addr.s_addr == sin2->sin_addr.s_addr;
+}
+
+static inline bool __rpc_copy_addr4(struct sockaddr *dst,
+				    const struct sockaddr *src)
+{
+	const struct sockaddr_in *ssin = (struct sockaddr_in *) src;
+	struct sockaddr_in *dsin = (struct sockaddr_in *) dst;
+
+	dsin->sin_family = ssin->sin_family;
+	dsin->sin_addr.s_addr = ssin->sin_addr.s_addr;
+	return true;
+}
+
+#if IS_ENABLED(CONFIG_IPV6)
+static inline bool __rpc_cmp_addr6(const struct sockaddr *sap1,
+				   const struct sockaddr *sap2)
+{
+	const struct sockaddr_in6 *sin1 = (const struct sockaddr_in6 *)sap1;
+	const struct sockaddr_in6 *sin2 = (const struct sockaddr_in6 *)sap2;
+
+	if (!ipv6_addr_equal(&sin1->sin6_addr, &sin2->sin6_addr))
+		return false;
+	else if (ipv6_addr_type(&sin1->sin6_addr) & IPV6_ADDR_LINKLOCAL)
+		return sin1->sin6_scope_id == sin2->sin6_scope_id;
+
+	return true;
+}
+
+static inline bool __rpc_copy_addr6(struct sockaddr *dst,
+				    const struct sockaddr *src)
+{
+	const struct sockaddr_in6 *ssin6 = (const struct sockaddr_in6 *) src;
+	struct sockaddr_in6 *dsin6 = (struct sockaddr_in6 *) dst;
+
+	dsin6->sin6_family = ssin6->sin6_family;
+	dsin6->sin6_addr = ssin6->sin6_addr;
+	return true;
+}
+#else	/* !(IS_ENABLED(CONFIG_IPV6) */
+static inline bool __rpc_cmp_addr6(const struct sockaddr *sap1,
+				   const struct sockaddr *sap2)
+{
+	return false;
+}
+
+static inline bool __rpc_copy_addr6(struct sockaddr *dst,
+				    const struct sockaddr *src)
+{
+	return false;
+}
+#endif	/* !(IS_ENABLED(CONFIG_IPV6) */
+
+/**
+ * rpc_cmp_addr - compare the address portion of two sockaddrs.
+ * @sap1: first sockaddr
+ * @sap2: second sockaddr
+ *
+ * Just compares the family and address portion. Ignores port, scope, etc.
+ * Returns true if the addrs are equal, false if they aren't.
+ */
+static inline bool rpc_cmp_addr(const struct sockaddr *sap1,
+				const struct sockaddr *sap2)
+{
+	if (sap1->sa_family == sap2->sa_family) {
+		switch (sap1->sa_family) {
+		case AF_INET:
+			return __rpc_cmp_addr4(sap1, sap2);
+		case AF_INET6:
+			return __rpc_cmp_addr6(sap1, sap2);
+		}
+	}
+	return false;
+}
+
+/**
+ * rpc_copy_addr - copy the address portion of one sockaddr to another
+ * @dst: destination sockaddr
+ * @src: source sockaddr
+ *
+ * Just copies the address portion and family. Ignores port, scope, etc.
+ * Caller is responsible for making certain that dst is large enough to hold
+ * the address in src. Returns true if address family is supported. Returns
+ * false otherwise.
+ */
+static inline bool rpc_copy_addr(struct sockaddr *dst,
+				 const struct sockaddr *src)
+{
+	switch (src->sa_family) {
+	case AF_INET:
+		return __rpc_copy_addr4(dst, src);
+	case AF_INET6:
+		return __rpc_copy_addr6(dst, src);
+	}
+	return false;
+}
+
+/**
+ * rpc_get_scope_id - return scopeid for a given sockaddr
+ * @sa: sockaddr to get scopeid from
+ *
+ * Returns the value of the sin6_scope_id for AF_INET6 addrs, or 0 if
+ * not an AF_INET6 address.
+ */
+static inline u32 rpc_get_scope_id(const struct sockaddr *sa)
+{
+	if (sa->sa_family != AF_INET6)
+		return 0;
+
+	return ((struct sockaddr_in6 *) sa)->sin6_scope_id;
+}
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_SUNRPC_CLNT_H */
diff --git a/include/linux/sunrpc/debug.h b/include/linux/sunrpc/debug.h
new file mode 100644
index 00000000..a76cc20d
--- /dev/null
+++ b/include/linux/sunrpc/debug.h
@@ -0,0 +1,110 @@
+/*
+ * linux/include/linux/sunrpc/debug.h
+ *
+ * Debugging support for sunrpc module
+ *
+ * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef _LINUX_SUNRPC_DEBUG_H_
+#define _LINUX_SUNRPC_DEBUG_H_
+
+/*
+ * RPC debug facilities
+ */
+#define RPCDBG_XPRT		0x0001
+#define RPCDBG_CALL		0x0002
+#define RPCDBG_DEBUG		0x0004
+#define RPCDBG_NFS		0x0008
+#define RPCDBG_AUTH		0x0010
+#define RPCDBG_BIND		0x0020
+#define RPCDBG_SCHED		0x0040
+#define RPCDBG_TRANS		0x0080
+#define RPCDBG_SVCXPRT		0x0100
+#define RPCDBG_SVCDSP		0x0200
+#define RPCDBG_MISC		0x0400
+#define RPCDBG_CACHE		0x0800
+#define RPCDBG_ALL		0x7fff
+
+#ifdef __KERNEL__
+
+/*
+ * Enable RPC debugging/profiling.
+ */
+#ifdef CONFIG_SUNRPC_DEBUG
+#define  RPC_DEBUG
+#endif
+#ifdef CONFIG_TRACEPOINTS
+#define RPC_TRACEPOINTS
+#endif
+/* #define  RPC_PROFILE */
+
+/*
+ * Debugging macros etc
+ */
+#ifdef RPC_DEBUG
+extern unsigned int		rpc_debug;
+extern unsigned int		nfs_debug;
+extern unsigned int		nfsd_debug;
+extern unsigned int		nlm_debug;
+#endif
+
+#define dprintk(args...)	dfprintk(FACILITY, ## args)
+#define dprintk_rcu(args...)	dfprintk_rcu(FACILITY, ## args)
+
+#undef ifdebug
+#ifdef RPC_DEBUG			
+# define ifdebug(fac)		if (unlikely(rpc_debug & RPCDBG_##fac))
+
+# define dfprintk(fac, args...)	\
+	do { \
+		ifdebug(fac) \
+			printk(KERN_DEFAULT args); \
+	} while (0)
+
+# define dfprintk_rcu(fac, args...)	\
+	do { \
+		ifdebug(fac) { \
+			rcu_read_lock(); \
+			printk(KERN_DEFAULT args); \
+			rcu_read_unlock(); \
+		} \
+	} while (0)
+
+# define RPC_IFDEBUG(x)		x
+#else
+# define ifdebug(fac)		if (0)
+# define dfprintk(fac, args...)	do {} while (0)
+# define dfprintk_rcu(fac, args...)	do {} while (0)
+# define RPC_IFDEBUG(x)
+#endif
+
+/*
+ * Sysctl interface for RPC debugging
+ */
+#ifdef RPC_DEBUG
+void		rpc_register_sysctl(void);
+void		rpc_unregister_sysctl(void);
+#endif
+
+#endif /* __KERNEL__ */
+
+/*
+ * Declarations for the sysctl debug interface, which allows to read or
+ * change the debug flags for rpc, nfs, nfsd, and lockd. Since the sunrpc
+ * module currently registers its sysctl table dynamically, the sysctl path
+ * for module FOO is <CTL_SUNRPC, CTL_FOODEBUG>.
+ */
+
+enum {
+	CTL_RPCDEBUG = 1,
+	CTL_NFSDEBUG,
+	CTL_NFSDDEBUG,
+	CTL_NLMDEBUG,
+	CTL_SLOTTABLE_UDP,
+	CTL_SLOTTABLE_TCP,
+	CTL_MIN_RESVPORT,
+	CTL_MAX_RESVPORT,
+};
+
+#endif /* _LINUX_SUNRPC_DEBUG_H_ */
diff --git a/include/linux/sunrpc/gss_api.h b/include/linux/sunrpc/gss_api.h
new file mode 100644
index 00000000..332da61c
--- /dev/null
+++ b/include/linux/sunrpc/gss_api.h
@@ -0,0 +1,141 @@
+/*
+ * linux/include/linux/sunrpc/gss_api.h
+ *
+ * Somewhat simplified version of the gss api.
+ *
+ * Dug Song <dugsong@monkey.org>
+ * Andy Adamson <andros@umich.edu>
+ * Bruce Fields <bfields@umich.edu>
+ * Copyright (c) 2000 The Regents of the University of Michigan
+ */
+
+#ifndef _LINUX_SUNRPC_GSS_API_H
+#define _LINUX_SUNRPC_GSS_API_H
+
+#ifdef __KERNEL__
+#include <linux/sunrpc/xdr.h>
+#include <linux/uio.h>
+
+/* The mechanism-independent gss-api context: */
+struct gss_ctx {
+	struct gss_api_mech	*mech_type;
+	void			*internal_ctx_id;
+};
+
+#define GSS_C_NO_BUFFER		((struct xdr_netobj) 0)
+#define GSS_C_NO_CONTEXT	((struct gss_ctx *) 0)
+#define GSS_C_NULL_OID		((struct xdr_netobj) 0)
+
+/*XXX  arbitrary length - is this set somewhere? */
+#define GSS_OID_MAX_LEN 32
+
+/* gss-api prototypes; note that these are somewhat simplified versions of
+ * the prototypes specified in RFC 2744. */
+int gss_import_sec_context(
+		const void*		input_token,
+		size_t			bufsize,
+		struct gss_api_mech	*mech,
+		struct gss_ctx		**ctx_id,
+		gfp_t			gfp_mask);
+u32 gss_get_mic(
+		struct gss_ctx		*ctx_id,
+		struct xdr_buf		*message,
+		struct xdr_netobj	*mic_token);
+u32 gss_verify_mic(
+		struct gss_ctx		*ctx_id,
+		struct xdr_buf		*message,
+		struct xdr_netobj	*mic_token);
+u32 gss_wrap(
+		struct gss_ctx		*ctx_id,
+		int			offset,
+		struct xdr_buf		*outbuf,
+		struct page		**inpages);
+u32 gss_unwrap(
+		struct gss_ctx		*ctx_id,
+		int			offset,
+		struct xdr_buf		*inbuf);
+u32 gss_delete_sec_context(
+		struct gss_ctx		**ctx_id);
+
+u32 gss_svc_to_pseudoflavor(struct gss_api_mech *, u32 service);
+u32 gss_pseudoflavor_to_service(struct gss_api_mech *, u32 pseudoflavor);
+char *gss_service_to_auth_domain_name(struct gss_api_mech *, u32 service);
+
+struct pf_desc {
+	u32	pseudoflavor;
+	u32	service;
+	char	*name;
+	char	*auth_domain_name;
+};
+
+/* Different mechanisms (e.g., krb5 or spkm3) may implement gss-api, and
+ * mechanisms may be dynamically registered or unregistered by modules. */
+
+/* Each mechanism is described by the following struct: */
+struct gss_api_mech {
+	struct list_head	gm_list;
+	struct module		*gm_owner;
+	struct xdr_netobj	gm_oid;
+	char			*gm_name;
+	const struct gss_api_ops *gm_ops;
+	/* pseudoflavors supported by this mechanism: */
+	int			gm_pf_num;
+	struct pf_desc *	gm_pfs;
+	/* Should the following be a callback operation instead? */
+	const char		*gm_upcall_enctypes;
+};
+
+/* and must provide the following operations: */
+struct gss_api_ops {
+	int (*gss_import_sec_context)(
+			const void		*input_token,
+			size_t			bufsize,
+			struct gss_ctx		*ctx_id,
+			gfp_t			gfp_mask);
+	u32 (*gss_get_mic)(
+			struct gss_ctx		*ctx_id,
+			struct xdr_buf		*message,
+			struct xdr_netobj	*mic_token);
+	u32 (*gss_verify_mic)(
+			struct gss_ctx		*ctx_id,
+			struct xdr_buf		*message,
+			struct xdr_netobj	*mic_token);
+	u32 (*gss_wrap)(
+			struct gss_ctx		*ctx_id,
+			int			offset,
+			struct xdr_buf		*outbuf,
+			struct page		**inpages);
+	u32 (*gss_unwrap)(
+			struct gss_ctx		*ctx_id,
+			int			offset,
+			struct xdr_buf		*buf);
+	void (*gss_delete_sec_context)(
+			void			*internal_ctx_id);
+};
+
+int gss_mech_register(struct gss_api_mech *);
+void gss_mech_unregister(struct gss_api_mech *);
+
+/* returns a mechanism descriptor given an OID, and increments the mechanism's
+ * reference count. */
+struct gss_api_mech * gss_mech_get_by_OID(struct xdr_netobj *);
+
+/* Returns a reference to a mechanism, given a name like "krb5" etc. */
+struct gss_api_mech *gss_mech_get_by_name(const char *);
+
+/* Similar, but get by pseudoflavor. */
+struct gss_api_mech *gss_mech_get_by_pseudoflavor(u32);
+
+/* Fill in an array with a list of supported pseudoflavors */
+int gss_mech_list_pseudoflavors(u32 *);
+
+/* Just increments the mechanism's reference count and returns its input: */
+struct gss_api_mech * gss_mech_get(struct gss_api_mech *);
+
+/* For every successful gss_mech_get or gss_mech_get_by_* call there must be a
+ * corresponding call to gss_mech_put. */
+void gss_mech_put(struct gss_api_mech *);
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_SUNRPC_GSS_API_H */
+
diff --git a/include/linux/sunrpc/gss_asn1.h b/include/linux/sunrpc/gss_asn1.h
new file mode 100644
index 00000000..3ccecd0a
--- /dev/null
+++ b/include/linux/sunrpc/gss_asn1.h
@@ -0,0 +1,81 @@
+/*
+ *  linux/include/linux/sunrpc/gss_asn1.h
+ *
+ *  minimal asn1 for generic encoding/decoding of gss tokens
+ *
+ *  Adapted from MIT Kerberos 5-1.2.1 lib/include/krb5.h,
+ *  lib/gssapi/krb5/gssapiP_krb5.h, and others
+ *
+ *  Copyright (c) 2000 The Regents of the University of Michigan.
+ *  All rights reserved.
+ *
+ *  Andy Adamson   <andros@umich.edu>
+ */
+
+/*
+ * Copyright 1995 by the Massachusetts Institute of Technology.
+ * All Rights Reserved.
+ *
+ * Export of this software from the United States of America may
+ *   require a specific license from the United States Government.
+ *   It is the responsibility of any person or organization contemplating
+ *   export to obtain such a license before exporting.
+ *
+ * WITHIN THAT CONSTRAINT, permission to use, copy, modify, and
+ * distribute this software and its documentation for any purpose and
+ * without fee is hereby granted, provided that the above copyright
+ * notice appear in all copies and that both that copyright notice and
+ * this permission notice appear in supporting documentation, and that
+ * the name of M.I.T. not be used in advertising or publicity pertaining
+ * to distribution of the software without specific, written prior
+ * permission.  Furthermore if you modify this software you must label
+ * your software as modified software and not distribute it in such a
+ * fashion that it might be confused with the original M.I.T. software.
+ * M.I.T. makes no representations about the suitability of
+ * this software for any purpose.  It is provided "as is" without express
+ * or implied warranty.
+ *
+ */
+
+
+#include <linux/sunrpc/gss_api.h>
+
+#define SIZEOF_INT 4
+
+/* from gssapi_err_generic.h */
+#define G_BAD_SERVICE_NAME                       (-2045022976L)
+#define G_BAD_STRING_UID                         (-2045022975L)
+#define G_NOUSER                                 (-2045022974L)
+#define G_VALIDATE_FAILED                        (-2045022973L)
+#define G_BUFFER_ALLOC                           (-2045022972L)
+#define G_BAD_MSG_CTX                            (-2045022971L)
+#define G_WRONG_SIZE                             (-2045022970L)
+#define G_BAD_USAGE                              (-2045022969L)
+#define G_UNKNOWN_QOP                            (-2045022968L)
+#define G_NO_HOSTNAME                            (-2045022967L)
+#define G_BAD_HOSTNAME                           (-2045022966L)
+#define G_WRONG_MECH                             (-2045022965L)
+#define G_BAD_TOK_HEADER                         (-2045022964L)
+#define G_BAD_DIRECTION                          (-2045022963L)
+#define G_TOK_TRUNC                              (-2045022962L)
+#define G_REFLECT                                (-2045022961L)
+#define G_WRONG_TOKID                            (-2045022960L)
+
+#define g_OID_equal(o1,o2) \
+   (((o1)->len == (o2)->len) && \
+    (memcmp((o1)->data,(o2)->data,(int) (o1)->len) == 0))
+
+u32 g_verify_token_header(
+     struct xdr_netobj *mech,
+     int *body_size,
+     unsigned char **buf_in,
+     int toksize);
+
+int g_token_size(
+     struct xdr_netobj *mech,
+     unsigned int body_size);
+
+void g_make_token_header(
+     struct xdr_netobj *mech,
+     int body_size,
+     unsigned char **buf);
diff --git a/include/linux/sunrpc/gss_err.h b/include/linux/sunrpc/gss_err.h
new file mode 100644
index 00000000..a6807867
--- /dev/null
+++ b/include/linux/sunrpc/gss_err.h
@@ -0,0 +1,167 @@
+/*
+ *  linux/include/sunrpc/gss_err.h
+ *
+ *  Adapted from MIT Kerberos 5-1.2.1 include/gssapi/gssapi.h
+ *
+ *  Copyright (c) 2002 The Regents of the University of Michigan.
+ *  All rights reserved.
+ *
+ *  Andy Adamson   <andros@umich.edu>
+ */
+
+/*
+ * Copyright 1993 by OpenVision Technologies, Inc.
+ * 
+ * Permission to use, copy, modify, distribute, and sell this software
+ * and its documentation for any purpose is hereby granted without fee,
+ * provided that the above copyright notice appears in all copies and
+ * that both that copyright notice and this permission notice appear in
+ * supporting documentation, and that the name of OpenVision not be used
+ * in advertising or publicity pertaining to distribution of the software
+ * without specific, written prior permission. OpenVision makes no
+ * representations about the suitability of this software for any
+ * purpose.  It is provided "as is" without express or implied warranty.
+ * 
+ * OPENVISION DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL OPENVISION BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+ * USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+ * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _LINUX_SUNRPC_GSS_ERR_H
+#define _LINUX_SUNRPC_GSS_ERR_H
+
+#ifdef __KERNEL__
+
+typedef unsigned int OM_uint32;
+
+/*
+ * Flag bits for context-level services.
+ */
+#define GSS_C_DELEG_FLAG 1
+#define GSS_C_MUTUAL_FLAG 2
+#define GSS_C_REPLAY_FLAG 4
+#define GSS_C_SEQUENCE_FLAG 8
+#define GSS_C_CONF_FLAG 16
+#define GSS_C_INTEG_FLAG 32
+#define	GSS_C_ANON_FLAG 64
+#define GSS_C_PROT_READY_FLAG 128
+#define GSS_C_TRANS_FLAG 256
+
+/*
+ * Credential usage options
+ */
+#define GSS_C_BOTH 0
+#define GSS_C_INITIATE 1
+#define GSS_C_ACCEPT 2
+
+/*
+ * Status code types for gss_display_status
+ */
+#define GSS_C_GSS_CODE 1
+#define GSS_C_MECH_CODE 2
+
+
+/*
+ * Expiration time of 2^32-1 seconds means infinite lifetime for a
+ * credential or security context
+ */
+#define GSS_C_INDEFINITE ((OM_uint32) 0xfffffffful)
+
+
+/* Major status codes */
+
+#define GSS_S_COMPLETE 0
+
+/*
+ * Some "helper" definitions to make the status code macros obvious.
+ */
+#define GSS_C_CALLING_ERROR_OFFSET 24
+#define GSS_C_ROUTINE_ERROR_OFFSET 16
+#define GSS_C_SUPPLEMENTARY_OFFSET 0
+#define GSS_C_CALLING_ERROR_MASK ((OM_uint32) 0377ul)
+#define GSS_C_ROUTINE_ERROR_MASK ((OM_uint32) 0377ul)
+#define GSS_C_SUPPLEMENTARY_MASK ((OM_uint32) 0177777ul)
+
+/*
+ * The macros that test status codes for error conditions.  Note that the
+ * GSS_ERROR() macro has changed slightly from the V1 GSSAPI so that it now
+ * evaluates its argument only once.
+ */
+#define GSS_CALLING_ERROR(x) \
+  ((x) & (GSS_C_CALLING_ERROR_MASK << GSS_C_CALLING_ERROR_OFFSET))
+#define GSS_ROUTINE_ERROR(x) \
+  ((x) & (GSS_C_ROUTINE_ERROR_MASK << GSS_C_ROUTINE_ERROR_OFFSET))
+#define GSS_SUPPLEMENTARY_INFO(x) \
+  ((x) & (GSS_C_SUPPLEMENTARY_MASK << GSS_C_SUPPLEMENTARY_OFFSET))
+#define GSS_ERROR(x) \
+  ((x) & ((GSS_C_CALLING_ERROR_MASK << GSS_C_CALLING_ERROR_OFFSET) | \
+	  (GSS_C_ROUTINE_ERROR_MASK << GSS_C_ROUTINE_ERROR_OFFSET)))
+
+/*
+ * Now the actual status code definitions
+ */
+
+/*
+ * Calling errors:
+ */
+#define GSS_S_CALL_INACCESSIBLE_READ \
+                             (((OM_uint32) 1ul) << GSS_C_CALLING_ERROR_OFFSET)
+#define GSS_S_CALL_INACCESSIBLE_WRITE \
+                             (((OM_uint32) 2ul) << GSS_C_CALLING_ERROR_OFFSET)
+#define GSS_S_CALL_BAD_STRUCTURE \
+                             (((OM_uint32) 3ul) << GSS_C_CALLING_ERROR_OFFSET)
+
+/*
+ * Routine errors:
+ */
+#define GSS_S_BAD_MECH (((OM_uint32) 1ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_BAD_NAME (((OM_uint32) 2ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_BAD_NAMETYPE (((OM_uint32) 3ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_BAD_BINDINGS (((OM_uint32) 4ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_BAD_STATUS (((OM_uint32) 5ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_BAD_SIG (((OM_uint32) 6ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_NO_CRED (((OM_uint32) 7ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_NO_CONTEXT (((OM_uint32) 8ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_DEFECTIVE_TOKEN (((OM_uint32) 9ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_DEFECTIVE_CREDENTIAL \
+     (((OM_uint32) 10ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_CREDENTIALS_EXPIRED \
+     (((OM_uint32) 11ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_CONTEXT_EXPIRED \
+     (((OM_uint32) 12ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_FAILURE (((OM_uint32) 13ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_BAD_QOP (((OM_uint32) 14ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_UNAUTHORIZED (((OM_uint32) 15ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_UNAVAILABLE (((OM_uint32) 16ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_DUPLICATE_ELEMENT \
+     (((OM_uint32) 17ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+#define GSS_S_NAME_NOT_MN \
+     (((OM_uint32) 18ul) << GSS_C_ROUTINE_ERROR_OFFSET)
+
+/*
+ * Supplementary info bits:
+ */
+#define GSS_S_CONTINUE_NEEDED (1 << (GSS_C_SUPPLEMENTARY_OFFSET + 0))
+#define GSS_S_DUPLICATE_TOKEN (1 << (GSS_C_SUPPLEMENTARY_OFFSET + 1))
+#define GSS_S_OLD_TOKEN (1 << (GSS_C_SUPPLEMENTARY_OFFSET + 2))
+#define GSS_S_UNSEQ_TOKEN (1 << (GSS_C_SUPPLEMENTARY_OFFSET + 3))
+#define GSS_S_GAP_TOKEN (1 << (GSS_C_SUPPLEMENTARY_OFFSET + 4))
+
+/* XXXX these are not part of the GSSAPI C bindings!  (but should be) */
+
+#define GSS_CALLING_ERROR_FIELD(x) \
+   (((x) >> GSS_C_CALLING_ERROR_OFFSET) & GSS_C_CALLING_ERROR_MASK)
+#define GSS_ROUTINE_ERROR_FIELD(x) \
+   (((x) >> GSS_C_ROUTINE_ERROR_OFFSET) & GSS_C_ROUTINE_ERROR_MASK)
+#define GSS_SUPPLEMENTARY_INFO_FIELD(x) \
+   (((x) >> GSS_C_SUPPLEMENTARY_OFFSET) & GSS_C_SUPPLEMENTARY_MASK)
+
+/* XXXX This is a necessary evil until the spec is fixed */
+#define GSS_S_CRED_UNAVAIL GSS_S_FAILURE
+
+#endif /* __KERNEL__ */
+#endif /* __LINUX_SUNRPC_GSS_ERR_H */
diff --git a/include/linux/sunrpc/gss_krb5.h b/include/linux/sunrpc/gss_krb5.h
new file mode 100644
index 00000000..5af2931c
--- /dev/null
+++ b/include/linux/sunrpc/gss_krb5.h
@@ -0,0 +1,331 @@
+/*
+ *  linux/include/linux/sunrpc/gss_krb5_types.h
+ *
+ *  Adapted from MIT Kerberos 5-1.2.1 lib/include/krb5.h,
+ *  lib/gssapi/krb5/gssapiP_krb5.h, and others
+ *
+ *  Copyright (c) 2000-2008 The Regents of the University of Michigan.
+ *  All rights reserved.
+ *
+ *  Andy Adamson   <andros@umich.edu>
+ *  Bruce Fields   <bfields@umich.edu>
+ */
+
+/*
+ * Copyright 1995 by the Massachusetts Institute of Technology.
+ * All Rights Reserved.
+ *
+ * Export of this software from the United States of America may
+ *   require a specific license from the United States Government.
+ *   It is the responsibility of any person or organization contemplating
+ *   export to obtain such a license before exporting.
+ *
+ * WITHIN THAT CONSTRAINT, permission to use, copy, modify, and
+ * distribute this software and its documentation for any purpose and
+ * without fee is hereby granted, provided that the above copyright
+ * notice appear in all copies and that both that copyright notice and
+ * this permission notice appear in supporting documentation, and that
+ * the name of M.I.T. not be used in advertising or publicity pertaining
+ * to distribution of the software without specific, written prior
+ * permission.  Furthermore if you modify this software you must label
+ * your software as modified software and not distribute it in such a
+ * fashion that it might be confused with the original M.I.T. software.
+ * M.I.T. makes no representations about the suitability of
+ * this software for any purpose.  It is provided "as is" without express
+ * or implied warranty.
+ *
+ */
+
+#include <linux/crypto.h>
+#include <linux/sunrpc/auth_gss.h>
+#include <linux/sunrpc/gss_err.h>
+#include <linux/sunrpc/gss_asn1.h>
+
+/* Length of constant used in key derivation */
+#define GSS_KRB5_K5CLENGTH (5)
+
+/* Maximum key length (in bytes) for the supported crypto algorithms*/
+#define GSS_KRB5_MAX_KEYLEN (32)
+
+/* Maximum checksum function output for the supported crypto algorithms */
+#define GSS_KRB5_MAX_CKSUM_LEN  (20)
+
+/* Maximum blocksize for the supported crypto algorithms */
+#define GSS_KRB5_MAX_BLOCKSIZE  (16)
+
+struct krb5_ctx;
+
+struct gss_krb5_enctype {
+	const u32		etype;		/* encryption (key) type */
+	const u32		ctype;		/* checksum type */
+	const char		*name;		/* "friendly" name */
+	const char		*encrypt_name;	/* crypto encrypt name */
+	const char		*cksum_name;	/* crypto checksum name */
+	const u16		signalg;	/* signing algorithm */
+	const u16		sealalg;	/* sealing algorithm */
+	const u32		blocksize;	/* encryption blocksize */
+	const u32		conflen;	/* confounder length
+						   (normally the same as
+						   the blocksize) */
+	const u32		cksumlength;	/* checksum length */
+	const u32		keyed_cksum;	/* is it a keyed cksum? */
+	const u32		keybytes;	/* raw key len, in bytes */
+	const u32		keylength;	/* final key len, in bytes */
+	u32 (*encrypt) (struct crypto_blkcipher *tfm,
+			void *iv, void *in, void *out,
+			int length);		/* encryption function */
+	u32 (*decrypt) (struct crypto_blkcipher *tfm,
+			void *iv, void *in, void *out,
+			int length);		/* decryption function */
+	u32 (*mk_key) (const struct gss_krb5_enctype *gk5e,
+		       struct xdr_netobj *in,
+		       struct xdr_netobj *out);	/* complete key generation */
+	u32 (*encrypt_v2) (struct krb5_ctx *kctx, u32 offset,
+			   struct xdr_buf *buf, int ec,
+			   struct page **pages); /* v2 encryption function */
+	u32 (*decrypt_v2) (struct krb5_ctx *kctx, u32 offset,
+			   struct xdr_buf *buf, u32 *headskip,
+			   u32 *tailskip);	/* v2 decryption function */
+};
+
+/* krb5_ctx flags definitions */
+#define KRB5_CTX_FLAG_INITIATOR         0x00000001
+#define KRB5_CTX_FLAG_CFX               0x00000002
+#define KRB5_CTX_FLAG_ACCEPTOR_SUBKEY   0x00000004
+
+struct krb5_ctx {
+	int			initiate; /* 1 = initiating, 0 = accepting */
+	u32			enctype;
+	u32			flags;
+	const struct gss_krb5_enctype *gk5e; /* enctype-specific info */
+	struct crypto_blkcipher	*enc;
+	struct crypto_blkcipher	*seq;
+	struct crypto_blkcipher *acceptor_enc;
+	struct crypto_blkcipher *initiator_enc;
+	struct crypto_blkcipher *acceptor_enc_aux;
+	struct crypto_blkcipher *initiator_enc_aux;
+	u8			Ksess[GSS_KRB5_MAX_KEYLEN]; /* session key */
+	u8			cksum[GSS_KRB5_MAX_KEYLEN];
+	s32			endtime;
+	u32			seq_send;
+	u64			seq_send64;
+	struct xdr_netobj	mech_used;
+	u8			initiator_sign[GSS_KRB5_MAX_KEYLEN];
+	u8			acceptor_sign[GSS_KRB5_MAX_KEYLEN];
+	u8			initiator_seal[GSS_KRB5_MAX_KEYLEN];
+	u8			acceptor_seal[GSS_KRB5_MAX_KEYLEN];
+	u8			initiator_integ[GSS_KRB5_MAX_KEYLEN];
+	u8			acceptor_integ[GSS_KRB5_MAX_KEYLEN];
+};
+
+extern spinlock_t krb5_seq_lock;
+
+/* The length of the Kerberos GSS token header */
+#define GSS_KRB5_TOK_HDR_LEN	(16)
+
+#define KG_TOK_MIC_MSG    0x0101
+#define KG_TOK_WRAP_MSG   0x0201
+
+#define KG2_TOK_INITIAL     0x0101
+#define KG2_TOK_RESPONSE    0x0202
+#define KG2_TOK_MIC         0x0404
+#define KG2_TOK_WRAP        0x0504
+
+#define KG2_TOKEN_FLAG_SENTBYACCEPTOR   0x01
+#define KG2_TOKEN_FLAG_SEALED           0x02
+#define KG2_TOKEN_FLAG_ACCEPTORSUBKEY   0x04
+
+#define KG2_RESP_FLAG_ERROR             0x0001
+#define KG2_RESP_FLAG_DELEG_OK          0x0002
+
+enum sgn_alg {
+	SGN_ALG_DES_MAC_MD5 = 0x0000,
+	SGN_ALG_MD2_5 = 0x0001,
+	SGN_ALG_DES_MAC = 0x0002,
+	SGN_ALG_3 = 0x0003,		/* not published */
+	SGN_ALG_HMAC_MD5 = 0x0011,	/* microsoft w2k; no support */
+	SGN_ALG_HMAC_SHA1_DES3_KD = 0x0004
+};
+enum seal_alg {
+	SEAL_ALG_NONE = 0xffff,
+	SEAL_ALG_DES = 0x0000,
+	SEAL_ALG_1 = 0x0001,		/* not published */
+	SEAL_ALG_MICROSOFT_RC4 = 0x0010,/* microsoft w2k; no support */
+	SEAL_ALG_DES3KD = 0x0002
+};
+
+#define CKSUMTYPE_CRC32			0x0001
+#define CKSUMTYPE_RSA_MD4		0x0002
+#define CKSUMTYPE_RSA_MD4_DES		0x0003
+#define CKSUMTYPE_DESCBC		0x0004
+#define CKSUMTYPE_RSA_MD5		0x0007
+#define CKSUMTYPE_RSA_MD5_DES		0x0008
+#define CKSUMTYPE_NIST_SHA		0x0009
+#define CKSUMTYPE_HMAC_SHA1_DES3	0x000c
+#define CKSUMTYPE_HMAC_SHA1_96_AES128   0x000f
+#define CKSUMTYPE_HMAC_SHA1_96_AES256   0x0010
+#define CKSUMTYPE_HMAC_MD5_ARCFOUR      -138 /* Microsoft md5 hmac cksumtype */
+
+/* from gssapi_err_krb5.h */
+#define KG_CCACHE_NOMATCH                        (39756032L)
+#define KG_KEYTAB_NOMATCH                        (39756033L)
+#define KG_TGT_MISSING                           (39756034L)
+#define KG_NO_SUBKEY                             (39756035L)
+#define KG_CONTEXT_ESTABLISHED                   (39756036L)
+#define KG_BAD_SIGN_TYPE                         (39756037L)
+#define KG_BAD_LENGTH                            (39756038L)
+#define KG_CTX_INCOMPLETE                        (39756039L)
+#define KG_CONTEXT                               (39756040L)
+#define KG_CRED                                  (39756041L)
+#define KG_ENC_DESC                              (39756042L)
+#define KG_BAD_SEQ                               (39756043L)
+#define KG_EMPTY_CCACHE                          (39756044L)
+#define KG_NO_CTYPES                             (39756045L)
+
+/* per Kerberos v5 protocol spec crypto types from the wire. 
+ * these get mapped to linux kernel crypto routines.  
+ */
+#define ENCTYPE_NULL            0x0000
+#define ENCTYPE_DES_CBC_CRC     0x0001	/* DES cbc mode with CRC-32 */
+#define ENCTYPE_DES_CBC_MD4     0x0002	/* DES cbc mode with RSA-MD4 */
+#define ENCTYPE_DES_CBC_MD5     0x0003	/* DES cbc mode with RSA-MD5 */
+#define ENCTYPE_DES_CBC_RAW     0x0004	/* DES cbc mode raw */
+/* XXX deprecated? */
+#define ENCTYPE_DES3_CBC_SHA    0x0005	/* DES-3 cbc mode with NIST-SHA */
+#define ENCTYPE_DES3_CBC_RAW    0x0006	/* DES-3 cbc mode raw */
+#define ENCTYPE_DES_HMAC_SHA1   0x0008
+#define ENCTYPE_DES3_CBC_SHA1   0x0010
+#define ENCTYPE_AES128_CTS_HMAC_SHA1_96 0x0011
+#define ENCTYPE_AES256_CTS_HMAC_SHA1_96 0x0012
+#define ENCTYPE_ARCFOUR_HMAC            0x0017
+#define ENCTYPE_ARCFOUR_HMAC_EXP        0x0018
+#define ENCTYPE_UNKNOWN         0x01ff
+
+/*
+ * Constants used for key derivation
+ */
+/* for 3DES */
+#define KG_USAGE_SEAL (22)
+#define KG_USAGE_SIGN (23)
+#define KG_USAGE_SEQ  (24)
+
+/* from rfc3961 */
+#define KEY_USAGE_SEED_CHECKSUM         (0x99)
+#define KEY_USAGE_SEED_ENCRYPTION       (0xAA)
+#define KEY_USAGE_SEED_INTEGRITY        (0x55)
+
+/* from rfc4121 */
+#define KG_USAGE_ACCEPTOR_SEAL  (22)
+#define KG_USAGE_ACCEPTOR_SIGN  (23)
+#define KG_USAGE_INITIATOR_SEAL (24)
+#define KG_USAGE_INITIATOR_SIGN (25)
+
+/*
+ * This compile-time check verifies that we will not exceed the
+ * slack space allotted by the client and server auth_gss code
+ * before they call gss_wrap().
+ */
+#define GSS_KRB5_MAX_SLACK_NEEDED \
+	(GSS_KRB5_TOK_HDR_LEN     /* gss token header */         \
+	+ GSS_KRB5_MAX_CKSUM_LEN  /* gss token checksum */       \
+	+ GSS_KRB5_MAX_BLOCKSIZE  /* confounder */               \
+	+ GSS_KRB5_MAX_BLOCKSIZE  /* possible padding */         \
+	+ GSS_KRB5_TOK_HDR_LEN    /* encrypted hdr in v2 token */\
+	+ GSS_KRB5_MAX_CKSUM_LEN  /* encryption hmac */          \
+	+ 4 + 4                   /* RPC verifier */             \
+	+ GSS_KRB5_TOK_HDR_LEN                                   \
+	+ GSS_KRB5_MAX_CKSUM_LEN)
+
+u32
+make_checksum(struct krb5_ctx *kctx, char *header, int hdrlen,
+		struct xdr_buf *body, int body_offset, u8 *cksumkey,
+		unsigned int usage, struct xdr_netobj *cksumout);
+
+u32
+make_checksum_v2(struct krb5_ctx *, char *header, int hdrlen,
+		 struct xdr_buf *body, int body_offset, u8 *key,
+		 unsigned int usage, struct xdr_netobj *cksum);
+
+u32 gss_get_mic_kerberos(struct gss_ctx *, struct xdr_buf *,
+		struct xdr_netobj *);
+
+u32 gss_verify_mic_kerberos(struct gss_ctx *, struct xdr_buf *,
+		struct xdr_netobj *);
+
+u32
+gss_wrap_kerberos(struct gss_ctx *ctx_id, int offset,
+		struct xdr_buf *outbuf, struct page **pages);
+
+u32
+gss_unwrap_kerberos(struct gss_ctx *ctx_id, int offset,
+		struct xdr_buf *buf);
+
+
+u32
+krb5_encrypt(struct crypto_blkcipher *key,
+	     void *iv, void *in, void *out, int length);
+
+u32
+krb5_decrypt(struct crypto_blkcipher *key,
+	     void *iv, void *in, void *out, int length); 
+
+int
+gss_encrypt_xdr_buf(struct crypto_blkcipher *tfm, struct xdr_buf *outbuf,
+		    int offset, struct page **pages);
+
+int
+gss_decrypt_xdr_buf(struct crypto_blkcipher *tfm, struct xdr_buf *inbuf,
+		    int offset);
+
+s32
+krb5_make_seq_num(struct krb5_ctx *kctx,
+		struct crypto_blkcipher *key,
+		int direction,
+		u32 seqnum, unsigned char *cksum, unsigned char *buf);
+
+s32
+krb5_get_seq_num(struct krb5_ctx *kctx,
+	       unsigned char *cksum,
+	       unsigned char *buf, int *direction, u32 *seqnum);
+
+int
+xdr_extend_head(struct xdr_buf *buf, unsigned int base, unsigned int shiftlen);
+
+u32
+krb5_derive_key(const struct gss_krb5_enctype *gk5e,
+		const struct xdr_netobj *inkey,
+		struct xdr_netobj *outkey,
+		const struct xdr_netobj *in_constant,
+		gfp_t gfp_mask);
+
+u32
+gss_krb5_des3_make_key(const struct gss_krb5_enctype *gk5e,
+		       struct xdr_netobj *randombits,
+		       struct xdr_netobj *key);
+
+u32
+gss_krb5_aes_make_key(const struct gss_krb5_enctype *gk5e,
+		      struct xdr_netobj *randombits,
+		      struct xdr_netobj *key);
+
+u32
+gss_krb5_aes_encrypt(struct krb5_ctx *kctx, u32 offset,
+		     struct xdr_buf *buf, int ec,
+		     struct page **pages);
+
+u32
+gss_krb5_aes_decrypt(struct krb5_ctx *kctx, u32 offset,
+		     struct xdr_buf *buf, u32 *plainoffset,
+		     u32 *plainlen);
+
+int
+krb5_rc4_setup_seq_key(struct krb5_ctx *kctx,
+		       struct crypto_blkcipher *cipher,
+		       unsigned char *cksum);
+
+int
+krb5_rc4_setup_enc_key(struct krb5_ctx *kctx,
+		       struct crypto_blkcipher *cipher,
+		       s32 seqnum);
+void
+gss_krb5_make_confounder(char *p, u32 conflen);
diff --git a/include/linux/sunrpc/gss_krb5_enctypes.h b/include/linux/sunrpc/gss_krb5_enctypes.h
new file mode 100644
index 00000000..ec6234ee
--- /dev/null
+++ b/include/linux/sunrpc/gss_krb5_enctypes.h
@@ -0,0 +1,4 @@
+/*
+ * Dumb way to share this static piece of information with nfsd
+ */
+#define KRB5_SUPPORTED_ENCTYPES "18,17,16,23,3,1,2"
diff --git a/include/linux/sunrpc/metrics.h b/include/linux/sunrpc/metrics.h
new file mode 100644
index 00000000..1565bbe8
--- /dev/null
+++ b/include/linux/sunrpc/metrics.h
@@ -0,0 +1,92 @@
+/*
+ *  linux/include/linux/sunrpc/metrics.h
+ *
+ *  Declarations for RPC client per-operation metrics
+ *
+ *  Copyright (C) 2005	Chuck Lever <cel@netapp.com>
+ *
+ *  RPC client per-operation statistics provide latency and retry
+ *  information about each type of RPC procedure in a given RPC program.
+ *  These statistics are not for detailed problem diagnosis, but simply
+ *  to indicate whether the problem is local or remote.
+ *
+ *  These counters are not meant to be human-readable, but are meant to be
+ *  integrated into system monitoring tools such as "sar" and "iostat".  As
+ *  such, the counters are sampled by the tools over time, and are never
+ *  zeroed after a file system is mounted.  Moving averages can be computed
+ *  by the tools by taking the difference between two instantaneous samples
+ *  and dividing that by the time between the samples.
+ *
+ *  The counters are maintained in a single array per RPC client, indexed
+ *  by procedure number.  There is no need to maintain separate counter
+ *  arrays per-CPU because these counters are always modified behind locks.
+ */
+
+#ifndef _LINUX_SUNRPC_METRICS_H
+#define _LINUX_SUNRPC_METRICS_H
+
+#include <linux/seq_file.h>
+#include <linux/ktime.h>
+
+#define RPC_IOSTATS_VERS	"1.0"
+
+struct rpc_iostats {
+	/*
+	 * These counters give an idea about how many request
+	 * transmissions are required, on average, to complete that
+	 * particular procedure.  Some procedures may require more
+	 * than one transmission because the server is unresponsive,
+	 * the client is retransmitting too aggressively, or the
+	 * requests are large and the network is congested.
+	 */
+	unsigned long		om_ops,		/* count of operations */
+				om_ntrans,	/* count of RPC transmissions */
+				om_timeouts;	/* count of major timeouts */
+
+	/*
+	 * These count how many bytes are sent and received for a
+	 * given RPC procedure type.  This indicates how much load a
+	 * particular procedure is putting on the network.  These
+	 * counts include the RPC and ULP headers, and the request
+	 * payload.
+	 */
+	unsigned long long      om_bytes_sent,	/* count of bytes out */
+				om_bytes_recv;	/* count of bytes in */
+
+	/*
+	 * The length of time an RPC request waits in queue before
+	 * transmission, the network + server latency of the request,
+	 * and the total time the request spent from init to release
+	 * are measured.
+	 */
+	ktime_t			om_queue,	/* queued for xmit */
+				om_rtt,		/* RPC RTT */
+				om_execute;	/* RPC execution */
+} ____cacheline_aligned;
+
+struct rpc_task;
+struct rpc_clnt;
+
+/*
+ * EXPORTed functions for managing rpc_iostats structures
+ */
+
+#ifdef CONFIG_PROC_FS
+
+struct rpc_iostats *	rpc_alloc_iostats(struct rpc_clnt *);
+void			rpc_count_iostats(const struct rpc_task *,
+					  struct rpc_iostats *);
+void			rpc_print_iostats(struct seq_file *, struct rpc_clnt *);
+void			rpc_free_iostats(struct rpc_iostats *);
+
+#else  /*  CONFIG_PROC_FS  */
+
+static inline struct rpc_iostats *rpc_alloc_iostats(struct rpc_clnt *clnt) { return NULL; }
+static inline void rpc_count_iostats(const struct rpc_task *task,
+				     struct rpc_iostats *stats) {}
+static inline void rpc_print_iostats(struct seq_file *seq, struct rpc_clnt *clnt) {}
+static inline void rpc_free_iostats(struct rpc_iostats *stats) {}
+
+#endif  /*  CONFIG_PROC_FS  */
+
+#endif /* _LINUX_SUNRPC_METRICS_H */
diff --git a/include/linux/sunrpc/msg_prot.h b/include/linux/sunrpc/msg_prot.h
new file mode 100644
index 00000000..c68a1479
--- /dev/null
+++ b/include/linux/sunrpc/msg_prot.h
@@ -0,0 +1,211 @@
+/*
+ * linux/include/linux/sunrpc/msg_prot.h
+ *
+ * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef _LINUX_SUNRPC_MSGPROT_H_
+#define _LINUX_SUNRPC_MSGPROT_H_
+
+#ifdef __KERNEL__ /* user programs should get these from the rpc header files */
+
+#define RPC_VERSION 2
+
+/* size of an XDR encoding unit in bytes, i.e. 32bit */
+#define XDR_UNIT	(4)
+
+/* spec defines authentication flavor as an unsigned 32 bit integer */
+typedef u32	rpc_authflavor_t;
+
+enum rpc_auth_flavors {
+	RPC_AUTH_NULL  = 0,
+	RPC_AUTH_UNIX  = 1,
+	RPC_AUTH_SHORT = 2,
+	RPC_AUTH_DES   = 3,
+	RPC_AUTH_KRB   = 4,
+	RPC_AUTH_GSS   = 6,
+	RPC_AUTH_MAXFLAVOR = 8,
+	/* pseudoflavors: */
+	RPC_AUTH_GSS_KRB5  = 390003,
+	RPC_AUTH_GSS_KRB5I = 390004,
+	RPC_AUTH_GSS_KRB5P = 390005,
+	RPC_AUTH_GSS_LKEY  = 390006,
+	RPC_AUTH_GSS_LKEYI = 390007,
+	RPC_AUTH_GSS_LKEYP = 390008,
+	RPC_AUTH_GSS_SPKM  = 390009,
+	RPC_AUTH_GSS_SPKMI = 390010,
+	RPC_AUTH_GSS_SPKMP = 390011,
+};
+
+/* Maximum size (in bytes) of an rpc credential or verifier */
+#define RPC_MAX_AUTH_SIZE (400)
+
+enum rpc_msg_type {
+	RPC_CALL = 0,
+	RPC_REPLY = 1
+};
+
+enum rpc_reply_stat {
+	RPC_MSG_ACCEPTED = 0,
+	RPC_MSG_DENIED = 1
+};
+
+enum rpc_accept_stat {
+	RPC_SUCCESS = 0,
+	RPC_PROG_UNAVAIL = 1,
+	RPC_PROG_MISMATCH = 2,
+	RPC_PROC_UNAVAIL = 3,
+	RPC_GARBAGE_ARGS = 4,
+	RPC_SYSTEM_ERR = 5,
+	/* internal use only */
+	RPC_DROP_REPLY = 60000,
+};
+
+enum rpc_reject_stat {
+	RPC_MISMATCH = 0,
+	RPC_AUTH_ERROR = 1
+};
+
+enum rpc_auth_stat {
+	RPC_AUTH_OK = 0,
+	RPC_AUTH_BADCRED = 1,
+	RPC_AUTH_REJECTEDCRED = 2,
+	RPC_AUTH_BADVERF = 3,
+	RPC_AUTH_REJECTEDVERF = 4,
+	RPC_AUTH_TOOWEAK = 5,
+	/* RPCSEC_GSS errors */
+	RPCSEC_GSS_CREDPROBLEM = 13,
+	RPCSEC_GSS_CTXPROBLEM = 14
+};
+
+#define RPC_MAXNETNAMELEN	256
+
+/*
+ * From RFC 1831:
+ *
+ * "A record is composed of one or more record fragments.  A record
+ *  fragment is a four-byte header followed by 0 to (2**31) - 1 bytes of
+ *  fragment data.  The bytes encode an unsigned binary number; as with
+ *  XDR integers, the byte order is from highest to lowest.  The number
+ *  encodes two values -- a boolean which indicates whether the fragment
+ *  is the last fragment of the record (bit value 1 implies the fragment
+ *  is the last fragment) and a 31-bit unsigned binary value which is the
+ *  length in bytes of the fragment's data.  The boolean value is the
+ *  highest-order bit of the header; the length is the 31 low-order bits.
+ *  (Note that this record specification is NOT in XDR standard form!)"
+ *
+ * The Linux RPC client always sends its requests in a single record
+ * fragment, limiting the maximum payload size for stream transports to
+ * 2GB.
+ */
+
+typedef __be32	rpc_fraghdr;
+
+#define	RPC_LAST_STREAM_FRAGMENT	(1U << 31)
+#define	RPC_FRAGMENT_SIZE_MASK		(~RPC_LAST_STREAM_FRAGMENT)
+#define	RPC_MAX_FRAGMENT_SIZE		((1U << 31) - 1)
+
+/*
+ * RPC call and reply header size as number of 32bit words (verifier
+ * size computed separately, see below)
+ */
+#define RPC_CALLHDRSIZE		(6)
+#define RPC_REPHDRSIZE		(4)
+
+
+/*
+ * Maximum RPC header size, including authentication,
+ * as number of 32bit words (see RFCs 1831, 1832).
+ *
+ *	xid			    1 xdr unit = 4 bytes
+ *	mtype			    1
+ *	rpc_version		    1
+ *	program			    1
+ *	prog_version		    1
+ *	procedure		    1
+ *	cred {
+ *	    flavor		    1
+ *	    length		    1
+ *	    body<RPC_MAX_AUTH_SIZE> 100 xdr units = 400 bytes
+ *	}
+ *	verf {
+ *	    flavor		    1
+ *	    length		    1
+ *	    body<RPC_MAX_AUTH_SIZE> 100 xdr units = 400 bytes
+ *	}
+ *	TOTAL			    210 xdr units = 840 bytes
+ */
+#define RPC_MAX_HEADER_WITH_AUTH \
+	(RPC_CALLHDRSIZE + 2*(2+RPC_MAX_AUTH_SIZE/4))
+
+/*
+ * RFC1833/RFC3530 rpcbind (v3+) well-known netid's.
+ */
+#define RPCBIND_NETID_UDP	"udp"
+#define RPCBIND_NETID_TCP	"tcp"
+#define RPCBIND_NETID_UDP6	"udp6"
+#define RPCBIND_NETID_TCP6	"tcp6"
+#define RPCBIND_NETID_LOCAL	"local"
+
+/*
+ * Note that RFC 1833 does not put any size restrictions on the
+ * netid string, but all currently defined netid's fit in 4 bytes.
+ */
+#define RPCBIND_MAXNETIDLEN	(4u)
+
+/*
+ * Universal addresses are introduced in RFC 1833 and further spelled
+ * out in RFC 3530.  RPCBIND_MAXUADDRLEN defines a maximum byte length
+ * of a universal address for use in allocating buffers and character
+ * arrays.
+ *
+ * Quoting RFC 3530, section 2.2:
+ *
+ * For TCP over IPv4 and for UDP over IPv4, the format of r_addr is the
+ * US-ASCII string:
+ *
+ *	h1.h2.h3.h4.p1.p2
+ *
+ * The prefix, "h1.h2.h3.h4", is the standard textual form for
+ * representing an IPv4 address, which is always four octets long.
+ * Assuming big-endian ordering, h1, h2, h3, and h4, are respectively,
+ * the first through fourth octets each converted to ASCII-decimal.
+ * Assuming big-endian ordering, p1 and p2 are, respectively, the first
+ * and second octets each converted to ASCII-decimal.  For example, if a
+ * host, in big-endian order, has an address of 0x0A010307 and there is
+ * a service listening on, in big endian order, port 0x020F (decimal
+ * 527), then the complete universal address is "10.1.3.7.2.15".
+ *
+ * ...
+ *
+ * For TCP over IPv6 and for UDP over IPv6, the format of r_addr is the
+ * US-ASCII string:
+ *
+ *	x1:x2:x3:x4:x5:x6:x7:x8.p1.p2
+ *
+ * The suffix "p1.p2" is the service port, and is computed the same way
+ * as with universal addresses for TCP and UDP over IPv4.  The prefix,
+ * "x1:x2:x3:x4:x5:x6:x7:x8", is the standard textual form for
+ * representing an IPv6 address as defined in Section 2.2 of [RFC2373].
+ * Additionally, the two alternative forms specified in Section 2.2 of
+ * [RFC2373] are also acceptable.
+ */
+
+#include <linux/inet.h>
+
+/* Maximum size of the port number part of a universal address */
+#define RPCBIND_MAXUADDRPLEN	sizeof(".255.255")
+
+/* Maximum size of an IPv4 universal address */
+#define RPCBIND_MAXUADDR4LEN	\
+		(INET_ADDRSTRLEN + RPCBIND_MAXUADDRPLEN)
+
+/* Maximum size of an IPv6 universal address */
+#define RPCBIND_MAXUADDR6LEN	\
+		(INET6_ADDRSTRLEN + RPCBIND_MAXUADDRPLEN)
+
+/* Assume INET6_ADDRSTRLEN will always be larger than INET_ADDRSTRLEN... */
+#define RPCBIND_MAXUADDRLEN	RPCBIND_MAXUADDR6LEN
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_SUNRPC_MSGPROT_H_ */
diff --git a/include/linux/sunrpc/rpc_pipe_fs.h b/include/linux/sunrpc/rpc_pipe_fs.h
new file mode 100644
index 00000000..a7b422b3
--- /dev/null
+++ b/include/linux/sunrpc/rpc_pipe_fs.h
@@ -0,0 +1,97 @@
+#ifndef _LINUX_SUNRPC_RPC_PIPE_FS_H
+#define _LINUX_SUNRPC_RPC_PIPE_FS_H
+
+#ifdef __KERNEL__
+
+#include <linux/workqueue.h>
+
+struct rpc_pipe_msg {
+	struct list_head list;
+	void *data;
+	size_t len;
+	size_t copied;
+	int errno;
+};
+
+struct rpc_pipe_ops {
+	ssize_t (*upcall)(struct file *, struct rpc_pipe_msg *, char __user *, size_t);
+	ssize_t (*downcall)(struct file *, const char __user *, size_t);
+	void (*release_pipe)(struct inode *);
+	int (*open_pipe)(struct inode *);
+	void (*destroy_msg)(struct rpc_pipe_msg *);
+};
+
+struct rpc_pipe {
+	struct list_head pipe;
+	struct list_head in_upcall;
+	struct list_head in_downcall;
+	int pipelen;
+	int nreaders;
+	int nwriters;
+#define RPC_PIPE_WAIT_FOR_OPEN	1
+	int flags;
+	struct delayed_work queue_timeout;
+	const struct rpc_pipe_ops *ops;
+	spinlock_t lock;
+	struct dentry *dentry;
+};
+
+struct rpc_inode {
+	struct inode vfs_inode;
+	void *private;
+	struct rpc_pipe *pipe;
+	wait_queue_head_t waitq;
+};
+
+static inline struct rpc_inode *
+RPC_I(struct inode *inode)
+{
+	return container_of(inode, struct rpc_inode, vfs_inode);
+}
+
+enum {
+	SUNRPC_PIPEFS_NFS_PRIO,
+	SUNRPC_PIPEFS_RPC_PRIO,
+};
+
+extern int rpc_pipefs_notifier_register(struct notifier_block *);
+extern void rpc_pipefs_notifier_unregister(struct notifier_block *);
+
+enum {
+	RPC_PIPEFS_MOUNT,
+	RPC_PIPEFS_UMOUNT,
+};
+
+extern struct dentry *rpc_d_lookup_sb(const struct super_block *sb,
+				      const unsigned char *dir_name);
+extern void rpc_pipefs_init_net(struct net *net);
+extern struct super_block *rpc_get_sb_net(const struct net *net);
+extern void rpc_put_sb_net(const struct net *net);
+
+extern ssize_t rpc_pipe_generic_upcall(struct file *, struct rpc_pipe_msg *,
+				       char __user *, size_t);
+extern int rpc_queue_upcall(struct rpc_pipe *, struct rpc_pipe_msg *);
+
+struct rpc_clnt;
+extern struct dentry *rpc_create_client_dir(struct dentry *, struct qstr *, struct rpc_clnt *);
+extern int rpc_remove_client_dir(struct dentry *);
+
+struct cache_detail;
+extern struct dentry *rpc_create_cache_dir(struct dentry *,
+					   struct qstr *,
+					   umode_t umode,
+					   struct cache_detail *);
+extern void rpc_remove_cache_dir(struct dentry *);
+
+extern int rpc_rmdir(struct dentry *dentry);
+
+struct rpc_pipe *rpc_mkpipe_data(const struct rpc_pipe_ops *ops, int flags);
+void rpc_destroy_pipe_data(struct rpc_pipe *pipe);
+extern struct dentry *rpc_mkpipe_dentry(struct dentry *, const char *, void *,
+					struct rpc_pipe *);
+extern int rpc_unlink(struct dentry *);
+extern int register_rpc_pipefs(void);
+extern void unregister_rpc_pipefs(void);
+
+#endif
+#endif
diff --git a/include/linux/sunrpc/rpc_rdma.h b/include/linux/sunrpc/rpc_rdma.h
new file mode 100644
index 00000000..b78f16b1
--- /dev/null
+++ b/include/linux/sunrpc/rpc_rdma.h
@@ -0,0 +1,118 @@
+/*
+ * Copyright (c) 2003-2007 Network Appliance, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the BSD-type
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *      Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *
+ *      Redistributions in binary form must reproduce the above
+ *      copyright notice, this list of conditions and the following
+ *      disclaimer in the documentation and/or other materials provided
+ *      with the distribution.
+ *
+ *      Neither the name of the Network Appliance, Inc. nor the names of
+ *      its contributors may be used to endorse or promote products
+ *      derived from this software without specific prior written
+ *      permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _LINUX_SUNRPC_RPC_RDMA_H
+#define _LINUX_SUNRPC_RPC_RDMA_H
+
+#include <linux/types.h>
+
+struct rpcrdma_segment {
+	__be32 rs_handle;	/* Registered memory handle */
+	__be32 rs_length;	/* Length of the chunk in bytes */
+	__be64 rs_offset;	/* Chunk virtual address or offset */
+};
+
+/*
+ * read chunk(s), encoded as a linked list.
+ */
+struct rpcrdma_read_chunk {
+	__be32 rc_discrim;	/* 1 indicates presence */
+	__be32 rc_position;	/* Position in XDR stream */
+	struct rpcrdma_segment rc_target;
+};
+
+/*
+ * write chunk, and reply chunk.
+ */
+struct rpcrdma_write_chunk {
+	struct rpcrdma_segment wc_target;
+};
+
+/*
+ * write chunk(s), encoded as a counted array.
+ */
+struct rpcrdma_write_array {
+	__be32 wc_discrim;	/* 1 indicates presence */
+	__be32 wc_nchunks;	/* Array count */
+	struct rpcrdma_write_chunk wc_array[0];
+};
+
+struct rpcrdma_msg {
+	__be32 rm_xid;	/* Mirrors the RPC header xid */
+	__be32 rm_vers;	/* Version of this protocol */
+	__be32 rm_credit;	/* Buffers requested/granted */
+	__be32 rm_type;	/* Type of message (enum rpcrdma_proc) */
+	union {
+
+		struct {			/* no chunks */
+			__be32 rm_empty[3];	/* 3 empty chunk lists */
+		} rm_nochunks;
+
+		struct {			/* no chunks and padded */
+			__be32 rm_align;	/* Padding alignment */
+			__be32 rm_thresh;	/* Padding threshold */
+			__be32 rm_pempty[3];	/* 3 empty chunk lists */
+		} rm_padded;
+
+		__be32 rm_chunks[0];	/* read, write and reply chunks */
+
+	} rm_body;
+};
+
+#define RPCRDMA_HDRLEN_MIN	28
+
+enum rpcrdma_errcode {
+	ERR_VERS = 1,
+	ERR_CHUNK = 2
+};
+
+struct rpcrdma_err_vers {
+	uint32_t rdma_vers_low;	/* Version range supported by peer */
+	uint32_t rdma_vers_high;
+};
+
+enum rpcrdma_proc {
+	RDMA_MSG = 0,		/* An RPC call or reply msg */
+	RDMA_NOMSG = 1,		/* An RPC call or reply msg - separate body */
+	RDMA_MSGP = 2,		/* An RPC call or reply msg with padding */
+	RDMA_DONE = 3,		/* Client signals reply completion */
+	RDMA_ERROR = 4		/* An RPC RDMA encoding error */
+};
+
+#endif				/* _LINUX_SUNRPC_RPC_RDMA_H */
diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h
new file mode 100644
index 00000000..dc0c3cc3
--- /dev/null
+++ b/include/linux/sunrpc/sched.h
@@ -0,0 +1,292 @@
+/*
+ * linux/include/linux/sunrpc/sched.h
+ *
+ * Scheduling primitives for kernel Sun RPC.
+ *
+ * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef _LINUX_SUNRPC_SCHED_H_
+#define _LINUX_SUNRPC_SCHED_H_
+
+#include <linux/timer.h>
+#include <linux/ktime.h>
+#include <linux/sunrpc/types.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+#include <linux/sunrpc/xdr.h>
+
+/*
+ * This is the actual RPC procedure call info.
+ */
+struct rpc_procinfo;
+struct rpc_message {
+	struct rpc_procinfo *	rpc_proc;	/* Procedure information */
+	void *			rpc_argp;	/* Arguments */
+	void *			rpc_resp;	/* Result */
+	struct rpc_cred *	rpc_cred;	/* Credentials */
+};
+
+struct rpc_call_ops;
+struct rpc_wait_queue;
+struct rpc_wait {
+	struct list_head	list;		/* wait queue links */
+	struct list_head	links;		/* Links to related tasks */
+	struct list_head	timer_list;	/* Timer list */
+	unsigned long		expires;
+};
+
+/*
+ * This is the RPC task struct
+ */
+struct rpc_task {
+	atomic_t		tk_count;	/* Reference count */
+	struct list_head	tk_task;	/* global list of tasks */
+	struct rpc_clnt *	tk_client;	/* RPC client */
+	struct rpc_rqst *	tk_rqstp;	/* RPC request */
+
+	/*
+	 * RPC call state
+	 */
+	struct rpc_message	tk_msg;		/* RPC call info */
+
+	/*
+	 * callback	to be executed after waking up
+	 * action	next procedure for async tasks
+	 * tk_ops	caller callbacks
+	 */
+	void			(*tk_callback)(struct rpc_task *);
+	void			(*tk_action)(struct rpc_task *);
+	const struct rpc_call_ops *tk_ops;
+	void *			tk_calldata;
+
+	unsigned long		tk_timeout;	/* timeout for rpc_sleep() */
+	unsigned long		tk_runstate;	/* Task run status */
+	struct workqueue_struct	*tk_workqueue;	/* Normally rpciod, but could
+						 * be any workqueue
+						 */
+	struct rpc_wait_queue 	*tk_waitqueue;	/* RPC wait queue we're on */
+	union {
+		struct work_struct	tk_work;	/* Async task work queue */
+		struct rpc_wait		tk_wait;	/* RPC wait */
+	} u;
+
+	ktime_t			tk_start;	/* RPC task init timestamp */
+
+	pid_t			tk_owner;	/* Process id for batching tasks */
+	int			tk_status;	/* result of last operation */
+	unsigned short		tk_flags;	/* misc flags */
+	unsigned short		tk_timeouts;	/* maj timeouts */
+
+#ifdef RPC_DEBUG
+	unsigned short		tk_pid;		/* debugging aid */
+#endif
+	unsigned char		tk_priority : 2,/* Task priority */
+				tk_garb_retry : 2,
+				tk_cred_retry : 2,
+				tk_rebind_retry : 2;
+};
+#define tk_xprt			tk_client->cl_xprt
+
+/* support walking a list of tasks on a wait queue */
+#define	task_for_each(task, pos, head) \
+	list_for_each(pos, head) \
+		if ((task=list_entry(pos, struct rpc_task, u.tk_wait.list)),1)
+
+#define	task_for_first(task, head) \
+	if (!list_empty(head) &&  \
+	    ((task=list_entry((head)->next, struct rpc_task, u.tk_wait.list)),1))
+
+typedef void			(*rpc_action)(struct rpc_task *);
+
+struct rpc_call_ops {
+	void (*rpc_call_prepare)(struct rpc_task *, void *);
+	void (*rpc_call_done)(struct rpc_task *, void *);
+	void (*rpc_count_stats)(struct rpc_task *, void *);
+	void (*rpc_release)(void *);
+};
+
+struct rpc_task_setup {
+	struct rpc_task *task;
+	struct rpc_clnt *rpc_client;
+	const struct rpc_message *rpc_message;
+	const struct rpc_call_ops *callback_ops;
+	void *callback_data;
+	struct workqueue_struct *workqueue;
+	unsigned short flags;
+	signed char priority;
+};
+
+/*
+ * RPC task flags
+ */
+#define RPC_TASK_ASYNC		0x0001		/* is an async task */
+#define RPC_TASK_SWAPPER	0x0002		/* is swapping in/out */
+#define RPC_CALL_MAJORSEEN	0x0020		/* major timeout seen */
+#define RPC_TASK_ROOTCREDS	0x0040		/* force root creds */
+#define RPC_TASK_DYNAMIC	0x0080		/* task was kmalloc'ed */
+#define RPC_TASK_KILLED		0x0100		/* task was killed */
+#define RPC_TASK_SOFT		0x0200		/* Use soft timeouts */
+#define RPC_TASK_SOFTCONN	0x0400		/* Fail if can't connect */
+#define RPC_TASK_SENT		0x0800		/* message was sent */
+#define RPC_TASK_TIMEOUT	0x1000		/* fail with ETIMEDOUT on timeout */
+
+#define RPC_IS_ASYNC(t)		((t)->tk_flags & RPC_TASK_ASYNC)
+#define RPC_IS_SWAPPER(t)	((t)->tk_flags & RPC_TASK_SWAPPER)
+#define RPC_DO_ROOTOVERRIDE(t)	((t)->tk_flags & RPC_TASK_ROOTCREDS)
+#define RPC_ASSASSINATED(t)	((t)->tk_flags & RPC_TASK_KILLED)
+#define RPC_IS_SOFT(t)		((t)->tk_flags & (RPC_TASK_SOFT|RPC_TASK_TIMEOUT))
+#define RPC_IS_SOFTCONN(t)	((t)->tk_flags & RPC_TASK_SOFTCONN)
+#define RPC_WAS_SENT(t)		((t)->tk_flags & RPC_TASK_SENT)
+
+#define RPC_TASK_RUNNING	0
+#define RPC_TASK_QUEUED		1
+#define RPC_TASK_ACTIVE		2
+
+#define RPC_IS_RUNNING(t)	test_bit(RPC_TASK_RUNNING, &(t)->tk_runstate)
+#define rpc_set_running(t)	set_bit(RPC_TASK_RUNNING, &(t)->tk_runstate)
+#define rpc_test_and_set_running(t) \
+				test_and_set_bit(RPC_TASK_RUNNING, &(t)->tk_runstate)
+#define rpc_clear_running(t)	\
+	do { \
+		smp_mb__before_clear_bit(); \
+		clear_bit(RPC_TASK_RUNNING, &(t)->tk_runstate); \
+		smp_mb__after_clear_bit(); \
+	} while (0)
+
+#define RPC_IS_QUEUED(t)	test_bit(RPC_TASK_QUEUED, &(t)->tk_runstate)
+#define rpc_set_queued(t)	set_bit(RPC_TASK_QUEUED, &(t)->tk_runstate)
+#define rpc_clear_queued(t)	\
+	do { \
+		smp_mb__before_clear_bit(); \
+		clear_bit(RPC_TASK_QUEUED, &(t)->tk_runstate); \
+		smp_mb__after_clear_bit(); \
+	} while (0)
+
+#define RPC_IS_ACTIVATED(t)	test_bit(RPC_TASK_ACTIVE, &(t)->tk_runstate)
+
+/*
+ * Task priorities.
+ * Note: if you change these, you must also change
+ * the task initialization definitions below.
+ */
+#define RPC_PRIORITY_LOW	(-1)
+#define RPC_PRIORITY_NORMAL	(0)
+#define RPC_PRIORITY_HIGH	(1)
+#define RPC_PRIORITY_PRIVILEGED	(2)
+#define RPC_NR_PRIORITY		(1 + RPC_PRIORITY_PRIVILEGED - RPC_PRIORITY_LOW)
+
+struct rpc_timer {
+	struct timer_list timer;
+	struct list_head list;
+	unsigned long expires;
+};
+
+/*
+ * RPC synchronization objects
+ */
+struct rpc_wait_queue {
+	spinlock_t		lock;
+	struct list_head	tasks[RPC_NR_PRIORITY];	/* task queue for each priority level */
+	pid_t			owner;			/* process id of last task serviced */
+	unsigned char		maxpriority;		/* maximum priority (0 if queue is not a priority queue) */
+	unsigned char		priority;		/* current priority */
+	unsigned char		count;			/* # task groups remaining serviced so far */
+	unsigned char		nr;			/* # tasks remaining for cookie */
+	unsigned short		qlen;			/* total # tasks waiting in queue */
+	struct rpc_timer	timer_list;
+#if defined(RPC_DEBUG) || defined(RPC_TRACEPOINTS)
+	const char *		name;
+#endif
+};
+
+/*
+ * This is the # requests to send consecutively
+ * from a single cookie.  The aim is to improve
+ * performance of NFS operations such as read/write.
+ */
+#define RPC_BATCH_COUNT			16
+#define RPC_IS_PRIORITY(q)		((q)->maxpriority > 0)
+
+/*
+ * Function prototypes
+ */
+struct rpc_task *rpc_new_task(const struct rpc_task_setup *);
+struct rpc_task *rpc_run_task(const struct rpc_task_setup *);
+struct rpc_task *rpc_run_bc_task(struct rpc_rqst *req,
+				const struct rpc_call_ops *ops);
+void		rpc_put_task(struct rpc_task *);
+void		rpc_put_task_async(struct rpc_task *);
+void		rpc_exit_task(struct rpc_task *);
+void		rpc_exit(struct rpc_task *, int);
+void		rpc_release_calldata(const struct rpc_call_ops *, void *);
+void		rpc_killall_tasks(struct rpc_clnt *);
+void		rpc_execute(struct rpc_task *);
+void		rpc_init_priority_wait_queue(struct rpc_wait_queue *, const char *);
+void		rpc_init_wait_queue(struct rpc_wait_queue *, const char *);
+void		rpc_destroy_wait_queue(struct rpc_wait_queue *);
+void		rpc_sleep_on(struct rpc_wait_queue *, struct rpc_task *,
+					rpc_action action);
+void		rpc_sleep_on_priority(struct rpc_wait_queue *,
+					struct rpc_task *,
+					rpc_action action,
+					int priority);
+void		rpc_wake_up_queued_task(struct rpc_wait_queue *,
+					struct rpc_task *);
+void		rpc_wake_up(struct rpc_wait_queue *);
+struct rpc_task *rpc_wake_up_next(struct rpc_wait_queue *);
+struct rpc_task *rpc_wake_up_first(struct rpc_wait_queue *,
+					bool (*)(struct rpc_task *, void *),
+					void *);
+void		rpc_wake_up_status(struct rpc_wait_queue *, int);
+int		rpc_queue_empty(struct rpc_wait_queue *);
+void		rpc_delay(struct rpc_task *, unsigned long);
+void *		rpc_malloc(struct rpc_task *, size_t);
+void		rpc_free(void *);
+int		rpciod_up(void);
+void		rpciod_down(void);
+int		__rpc_wait_for_completion_task(struct rpc_task *task, int (*)(void *));
+#ifdef RPC_DEBUG
+struct net;
+void		rpc_show_tasks(struct net *);
+#endif
+int		rpc_init_mempool(void);
+void		rpc_destroy_mempool(void);
+extern struct workqueue_struct *rpciod_workqueue;
+void		rpc_prepare_task(struct rpc_task *task);
+
+static inline int rpc_wait_for_completion_task(struct rpc_task *task)
+{
+	return __rpc_wait_for_completion_task(task, NULL);
+}
+
+static inline void rpc_task_set_priority(struct rpc_task *task, unsigned char prio)
+{
+	task->tk_priority = prio - RPC_PRIORITY_LOW;
+}
+
+static inline int rpc_task_has_priority(struct rpc_task *task, unsigned char prio)
+{
+	return (task->tk_priority + RPC_PRIORITY_LOW == prio);
+}
+
+#if defined(RPC_DEBUG) || defined (RPC_TRACEPOINTS)
+static inline const char * rpc_qname(const struct rpc_wait_queue *q)
+{
+	return ((q && q->name) ? q->name : "unknown");
+}
+
+static inline void rpc_assign_waitqueue_name(struct rpc_wait_queue *q,
+		const char *name)
+{
+	q->name = name;
+}
+#else
+static inline void rpc_assign_waitqueue_name(struct rpc_wait_queue *q,
+		const char *name)
+{
+}
+#endif
+
+#endif /* _LINUX_SUNRPC_SCHED_H_ */
diff --git a/include/linux/sunrpc/stats.h b/include/linux/sunrpc/stats.h
new file mode 100644
index 00000000..edc64219
--- /dev/null
+++ b/include/linux/sunrpc/stats.h
@@ -0,0 +1,84 @@
+/*
+ * linux/include/linux/sunrpc/stats.h
+ *
+ * Client statistics collection for SUN RPC
+ *
+ * Copyright (C) 1996 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef _LINUX_SUNRPC_STATS_H
+#define _LINUX_SUNRPC_STATS_H
+
+#include <linux/proc_fs.h>
+
+struct rpc_stat {
+	const struct rpc_program *program;
+
+	unsigned int		netcnt,
+				netudpcnt,
+				nettcpcnt,
+				nettcpconn,
+				netreconn;
+	unsigned int		rpccnt,
+				rpcretrans,
+				rpcauthrefresh,
+				rpcgarbage;
+};
+
+struct svc_stat {
+	struct svc_program *	program;
+
+	unsigned int		netcnt,
+				netudpcnt,
+				nettcpcnt,
+				nettcpconn;
+	unsigned int		rpccnt,
+				rpcbadfmt,
+				rpcbadauth,
+				rpcbadclnt;
+};
+
+struct net;
+#ifdef CONFIG_PROC_FS
+int			rpc_proc_init(struct net *);
+void			rpc_proc_exit(struct net *);
+#else
+static inline int rpc_proc_init(struct net *net)
+{
+	return 0;
+}
+
+static inline void rpc_proc_exit(struct net *net)
+{
+}
+#endif
+
+#ifdef MODULE
+void			rpc_modcount(struct inode *, int);
+#endif
+
+#ifdef CONFIG_PROC_FS
+struct proc_dir_entry *	rpc_proc_register(struct net *,struct rpc_stat *);
+void			rpc_proc_unregister(struct net *,const char *);
+void			rpc_proc_zero(const struct rpc_program *);
+struct proc_dir_entry *	svc_proc_register(struct net *, struct svc_stat *,
+					  const struct file_operations *);
+void			svc_proc_unregister(struct net *, const char *);
+
+void			svc_seq_show(struct seq_file *,
+				     const struct svc_stat *);
+#else
+
+static inline struct proc_dir_entry *rpc_proc_register(struct net *net, struct rpc_stat *s) { return NULL; }
+static inline void rpc_proc_unregister(struct net *net, const char *p) {}
+static inline void rpc_proc_zero(const struct rpc_program *p) {}
+
+static inline struct proc_dir_entry *svc_proc_register(struct net *net, struct svc_stat *s,
+						       const struct file_operations *f) { return NULL; }
+static inline void svc_proc_unregister(struct net *net, const char *p) {}
+
+static inline void svc_seq_show(struct seq_file *seq,
+				const struct svc_stat *st) {}
+#endif
+
+#endif /* _LINUX_SUNRPC_STATS_H */
diff --git a/include/linux/sunrpc/svc.h b/include/linux/sunrpc/svc.h
new file mode 100644
index 00000000..2b43e021
--- /dev/null
+++ b/include/linux/sunrpc/svc.h
@@ -0,0 +1,461 @@
+/*
+ * linux/include/linux/sunrpc/svc.h
+ *
+ * RPC server declarations.
+ *
+ * Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de>
+ */
+
+
+#ifndef SUNRPC_SVC_H
+#define SUNRPC_SVC_H
+
+#include <linux/in.h>
+#include <linux/in6.h>
+#include <linux/sunrpc/types.h>
+#include <linux/sunrpc/xdr.h>
+#include <linux/sunrpc/auth.h>
+#include <linux/sunrpc/svcauth.h>
+#include <linux/wait.h>
+#include <linux/mm.h>
+
+/*
+ * This is the RPC server thread function prototype
+ */
+typedef int		(*svc_thread_fn)(void *);
+
+/* statistics for svc_pool structures */
+struct svc_pool_stats {
+	unsigned long	packets;
+	unsigned long	sockets_queued;
+	unsigned long	threads_woken;
+	unsigned long	threads_timedout;
+};
+
+/*
+ *
+ * RPC service thread pool.
+ *
+ * Pool of threads and temporary sockets.  Generally there is only
+ * a single one of these per RPC service, but on NUMA machines those
+ * services that can benefit from it (i.e. nfs but not lockd) will
+ * have one pool per NUMA node.  This optimisation reduces cross-
+ * node traffic on multi-node NUMA NFS servers.
+ */
+struct svc_pool {
+	unsigned int		sp_id;	    	/* pool id; also node id on NUMA */
+	spinlock_t		sp_lock;	/* protects all fields */
+	struct list_head	sp_threads;	/* idle server threads */
+	struct list_head	sp_sockets;	/* pending sockets */
+	unsigned int		sp_nrthreads;	/* # of threads in pool */
+	struct list_head	sp_all_threads;	/* all server threads */
+	struct svc_pool_stats	sp_stats;	/* statistics on pool operation */
+} ____cacheline_aligned_in_smp;
+
+/*
+ * RPC service.
+ *
+ * An RPC service is a ``daemon,'' possibly multithreaded, which
+ * receives and processes incoming RPC messages.
+ * It has one or more transport sockets associated with it, and maintains
+ * a list of idle threads waiting for input.
+ *
+ * We currently do not support more than one RPC program per daemon.
+ */
+struct svc_serv {
+	struct svc_program *	sv_program;	/* RPC program */
+	struct svc_stat *	sv_stats;	/* RPC statistics */
+	spinlock_t		sv_lock;
+	unsigned int		sv_nrthreads;	/* # of server threads */
+	unsigned int		sv_maxconn;	/* max connections allowed or
+						 * '0' causing max to be based
+						 * on number of threads. */
+
+	unsigned int		sv_max_payload;	/* datagram payload size */
+	unsigned int		sv_max_mesg;	/* max_payload + 1 page for overheads */
+	unsigned int		sv_xdrsize;	/* XDR buffer size */
+	struct list_head	sv_permsocks;	/* all permanent sockets */
+	struct list_head	sv_tempsocks;	/* all temporary sockets */
+	int			sv_tmpcnt;	/* count of temporary sockets */
+	struct timer_list	sv_temptimer;	/* timer for aging temporary sockets */
+
+	char *			sv_name;	/* service name */
+
+	unsigned int		sv_nrpools;	/* number of thread pools */
+	struct svc_pool *	sv_pools;	/* array of thread pools */
+
+	void			(*sv_shutdown)(struct svc_serv *serv,
+					       struct net *net);
+						/* Callback to use when last thread
+						 * exits.
+						 */
+
+	struct module *		sv_module;	/* optional module to count when
+						 * adding threads */
+	svc_thread_fn		sv_function;	/* main function for threads */
+#if defined(CONFIG_SUNRPC_BACKCHANNEL)
+	struct list_head	sv_cb_list;	/* queue for callback requests
+						 * that arrive over the same
+						 * connection */
+	spinlock_t		sv_cb_lock;	/* protects the svc_cb_list */
+	wait_queue_head_t	sv_cb_waitq;	/* sleep here if there are no
+						 * entries in the svc_cb_list */
+	struct svc_xprt		*sv_bc_xprt;	/* callback on fore channel */
+#endif /* CONFIG_SUNRPC_BACKCHANNEL */
+};
+
+/*
+ * We use sv_nrthreads as a reference count.  svc_destroy() drops
+ * this refcount, so we need to bump it up around operations that
+ * change the number of threads.  Horrible, but there it is.
+ * Should be called with the BKL held.
+ */
+static inline void svc_get(struct svc_serv *serv)
+{
+	serv->sv_nrthreads++;
+}
+
+/*
+ * Maximum payload size supported by a kernel RPC server.
+ * This is use to determine the max number of pages nfsd is
+ * willing to return in a single READ operation.
+ *
+ * These happen to all be powers of 2, which is not strictly
+ * necessary but helps enforce the real limitation, which is
+ * that they should be multiples of PAGE_CACHE_SIZE.
+ *
+ * For UDP transports, a block plus NFS,RPC, and UDP headers
+ * has to fit into the IP datagram limit of 64K.  The largest
+ * feasible number for all known page sizes is probably 48K,
+ * but we choose 32K here.  This is the same as the historical
+ * Linux limit; someone who cares more about NFS/UDP performance
+ * can test a larger number.
+ *
+ * For TCP transports we have more freedom.  A size of 1MB is
+ * chosen to match the client limit.  Other OSes are known to
+ * have larger limits, but those numbers are probably beyond
+ * the point of diminishing returns.
+ */
+#define RPCSVC_MAXPAYLOAD	(1*1024*1024u)
+#define RPCSVC_MAXPAYLOAD_TCP	RPCSVC_MAXPAYLOAD
+#define RPCSVC_MAXPAYLOAD_UDP	(32*1024u)
+
+extern u32 svc_max_payload(const struct svc_rqst *rqstp);
+
+/*
+ * RPC Requsts and replies are stored in one or more pages.
+ * We maintain an array of pages for each server thread.
+ * Requests are copied into these pages as they arrive.  Remaining
+ * pages are available to write the reply into.
+ *
+ * Pages are sent using ->sendpage so each server thread needs to
+ * allocate more to replace those used in sending.  To help keep track
+ * of these pages we have a receive list where all pages initialy live,
+ * and a send list where pages are moved to when there are to be part
+ * of a reply.
+ *
+ * We use xdr_buf for holding responses as it fits well with NFS
+ * read responses (that have a header, and some data pages, and possibly
+ * a tail) and means we can share some client side routines.
+ *
+ * The xdr_buf.head kvec always points to the first page in the rq_*pages
+ * list.  The xdr_buf.pages pointer points to the second page on that
+ * list.  xdr_buf.tail points to the end of the first page.
+ * This assumes that the non-page part of an rpc reply will fit
+ * in a page - NFSd ensures this.  lockd also has no trouble.
+ *
+ * Each request/reply pair can have at most one "payload", plus two pages,
+ * one for the request, and one for the reply.
+ * We using ->sendfile to return read data, we might need one extra page
+ * if the request is not page-aligned.  So add another '1'.
+ */
+#define RPCSVC_MAXPAGES		((RPCSVC_MAXPAYLOAD+PAGE_SIZE-1)/PAGE_SIZE \
+				+ 2 + 1)
+
+static inline u32 svc_getnl(struct kvec *iov)
+{
+	__be32 val, *vp;
+	vp = iov->iov_base;
+	val = *vp++;
+	iov->iov_base = (void*)vp;
+	iov->iov_len -= sizeof(__be32);
+	return ntohl(val);
+}
+
+static inline void svc_putnl(struct kvec *iov, u32 val)
+{
+	__be32 *vp = iov->iov_base + iov->iov_len;
+	*vp = htonl(val);
+	iov->iov_len += sizeof(__be32);
+}
+
+static inline __be32 svc_getu32(struct kvec *iov)
+{
+	__be32 val, *vp;
+	vp = iov->iov_base;
+	val = *vp++;
+	iov->iov_base = (void*)vp;
+	iov->iov_len -= sizeof(__be32);
+	return val;
+}
+
+static inline void svc_ungetu32(struct kvec *iov)
+{
+	__be32 *vp = (__be32 *)iov->iov_base;
+	iov->iov_base = (void *)(vp - 1);
+	iov->iov_len += sizeof(*vp);
+}
+
+static inline void svc_putu32(struct kvec *iov, __be32 val)
+{
+	__be32 *vp = iov->iov_base + iov->iov_len;
+	*vp = val;
+	iov->iov_len += sizeof(__be32);
+}
+
+/*
+ * The context of a single thread, including the request currently being
+ * processed.
+ */
+struct svc_rqst {
+	struct list_head	rq_list;	/* idle list */
+	struct list_head	rq_all;		/* all threads list */
+	struct svc_xprt *	rq_xprt;	/* transport ptr */
+
+	struct sockaddr_storage	rq_addr;	/* peer address */
+	size_t			rq_addrlen;
+	struct sockaddr_storage	rq_daddr;	/* dest addr of request
+						 *  - reply from here */
+	size_t			rq_daddrlen;
+
+	struct svc_serv *	rq_server;	/* RPC service definition */
+	struct svc_pool *	rq_pool;	/* thread pool */
+	struct svc_procedure *	rq_procinfo;	/* procedure info */
+	struct auth_ops *	rq_authop;	/* authentication flavour */
+	u32			rq_flavor;	/* pseudoflavor */
+	struct svc_cred		rq_cred;	/* auth info */
+	void *			rq_xprt_ctxt;	/* transport specific context ptr */
+	struct svc_deferred_req*rq_deferred;	/* deferred request we are replaying */
+	int			rq_usedeferral;	/* use deferral */
+
+	size_t			rq_xprt_hlen;	/* xprt header len */
+	struct xdr_buf		rq_arg;
+	struct xdr_buf		rq_res;
+	struct page *		rq_pages[RPCSVC_MAXPAGES];
+	struct page *		*rq_respages;	/* points into rq_pages */
+	int			rq_resused;	/* number of pages used for result */
+
+	struct kvec		rq_vec[RPCSVC_MAXPAGES]; /* generally useful.. */
+
+	__be32			rq_xid;		/* transmission id */
+	u32			rq_prog;	/* program number */
+	u32			rq_vers;	/* program version */
+	u32			rq_proc;	/* procedure number */
+	u32			rq_prot;	/* IP protocol */
+	unsigned short
+				rq_secure  : 1;	/* secure port */
+
+	void *			rq_argp;	/* decoded arguments */
+	void *			rq_resp;	/* xdr'd results */
+	void *			rq_auth_data;	/* flavor-specific data */
+
+	int			rq_reserved;	/* space on socket outq
+						 * reserved for this request
+						 */
+
+	struct cache_req	rq_chandle;	/* handle passed to caches for 
+						 * request delaying 
+						 */
+	bool			rq_dropme;
+	/* Catering to nfsd */
+	struct auth_domain *	rq_client;	/* RPC peer info */
+	struct auth_domain *	rq_gssclient;	/* "gss/"-style peer info */
+	int			rq_cachetype;
+	struct svc_cacherep *	rq_cacherep;	/* cache info */
+	int			rq_splice_ok;   /* turned off in gss privacy
+						 * to prevent encrypting page
+						 * cache pages */
+	wait_queue_head_t	rq_wait;	/* synchronization */
+	struct task_struct	*rq_task;	/* service thread */
+};
+
+/*
+ * Rigorous type checking on sockaddr type conversions
+ */
+static inline struct sockaddr_in *svc_addr_in(const struct svc_rqst *rqst)
+{
+	return (struct sockaddr_in *) &rqst->rq_addr;
+}
+
+static inline struct sockaddr_in6 *svc_addr_in6(const struct svc_rqst *rqst)
+{
+	return (struct sockaddr_in6 *) &rqst->rq_addr;
+}
+
+static inline struct sockaddr *svc_addr(const struct svc_rqst *rqst)
+{
+	return (struct sockaddr *) &rqst->rq_addr;
+}
+
+static inline struct sockaddr_in *svc_daddr_in(const struct svc_rqst *rqst)
+{
+	return (struct sockaddr_in *) &rqst->rq_daddr;
+}
+
+static inline struct sockaddr_in6 *svc_daddr_in6(const struct svc_rqst *rqst)
+{
+	return (struct sockaddr_in6 *) &rqst->rq_daddr;
+}
+
+static inline struct sockaddr *svc_daddr(const struct svc_rqst *rqst)
+{
+	return (struct sockaddr *) &rqst->rq_daddr;
+}
+
+/*
+ * Check buffer bounds after decoding arguments
+ */
+static inline int
+xdr_argsize_check(struct svc_rqst *rqstp, __be32 *p)
+{
+	char *cp = (char *)p;
+	struct kvec *vec = &rqstp->rq_arg.head[0];
+	return cp >= (char*)vec->iov_base
+		&& cp <= (char*)vec->iov_base + vec->iov_len;
+}
+
+static inline int
+xdr_ressize_check(struct svc_rqst *rqstp, __be32 *p)
+{
+	struct kvec *vec = &rqstp->rq_res.head[0];
+	char *cp = (char*)p;
+
+	vec->iov_len = cp - (char*)vec->iov_base;
+
+	return vec->iov_len <= PAGE_SIZE;
+}
+
+static inline void svc_free_res_pages(struct svc_rqst *rqstp)
+{
+	while (rqstp->rq_resused) {
+		struct page **pp = (rqstp->rq_respages +
+				    --rqstp->rq_resused);
+		if (*pp) {
+			put_page(*pp);
+			*pp = NULL;
+		}
+	}
+}
+
+struct svc_deferred_req {
+	u32			prot;	/* protocol (UDP or TCP) */
+	struct svc_xprt		*xprt;
+	struct sockaddr_storage	addr;	/* where reply must go */
+	size_t			addrlen;
+	struct sockaddr_storage	daddr;	/* where reply must come from */
+	size_t			daddrlen;
+	struct cache_deferred_req handle;
+	size_t			xprt_hlen;
+	int			argslen;
+	__be32			args[0];
+};
+
+/*
+ * List of RPC programs on the same transport endpoint
+ */
+struct svc_program {
+	struct svc_program *	pg_next;	/* other programs (same xprt) */
+	u32			pg_prog;	/* program number */
+	unsigned int		pg_lovers;	/* lowest version */
+	unsigned int		pg_hivers;	/* lowest version */
+	unsigned int		pg_nvers;	/* number of versions */
+	struct svc_version **	pg_vers;	/* version array */
+	char *			pg_name;	/* service name */
+	char *			pg_class;	/* class name: services sharing authentication */
+	struct svc_stat *	pg_stats;	/* rpc statistics */
+	int			(*pg_authenticate)(struct svc_rqst *);
+};
+
+/*
+ * RPC program version
+ */
+struct svc_version {
+	u32			vs_vers;	/* version number */
+	u32			vs_nproc;	/* number of procedures */
+	struct svc_procedure *	vs_proc;	/* per-procedure info */
+	u32			vs_xdrsize;	/* xdrsize needed for this version */
+
+	unsigned int		vs_hidden : 1;	/* Don't register with portmapper.
+						 * Only used for nfsacl so far. */
+
+	/* Override dispatch function (e.g. when caching replies).
+	 * A return value of 0 means drop the request. 
+	 * vs_dispatch == NULL means use default dispatcher.
+	 */
+	int			(*vs_dispatch)(struct svc_rqst *, __be32 *);
+};
+
+/*
+ * RPC procedure info
+ */
+typedef __be32	(*svc_procfunc)(struct svc_rqst *, void *argp, void *resp);
+struct svc_procedure {
+	svc_procfunc		pc_func;	/* process the request */
+	kxdrproc_t		pc_decode;	/* XDR decode args */
+	kxdrproc_t		pc_encode;	/* XDR encode result */
+	kxdrproc_t		pc_release;	/* XDR free result */
+	unsigned int		pc_argsize;	/* argument struct size */
+	unsigned int		pc_ressize;	/* result struct size */
+	unsigned int		pc_count;	/* call count */
+	unsigned int		pc_cachetype;	/* cache info (NFS) */
+	unsigned int		pc_xdrressize;	/* maximum size of XDR reply */
+};
+
+/*
+ * Function prototypes.
+ */
+int svc_rpcb_setup(struct svc_serv *serv, struct net *net);
+void svc_rpcb_cleanup(struct svc_serv *serv, struct net *net);
+int svc_bind(struct svc_serv *serv, struct net *net);
+struct svc_serv *svc_create(struct svc_program *, unsigned int,
+			    void (*shutdown)(struct svc_serv *, struct net *net));
+struct svc_rqst *svc_prepare_thread(struct svc_serv *serv,
+					struct svc_pool *pool, int node);
+void		   svc_exit_thread(struct svc_rqst *);
+struct svc_serv *  svc_create_pooled(struct svc_program *, unsigned int,
+			void (*shutdown)(struct svc_serv *, struct net *net),
+			svc_thread_fn, struct module *);
+int		   svc_set_num_threads(struct svc_serv *, struct svc_pool *, int);
+int		   svc_pool_stats_open(struct svc_serv *serv, struct file *file);
+void		   svc_destroy(struct svc_serv *);
+void		   svc_shutdown_net(struct svc_serv *, struct net *);
+int		   svc_process(struct svc_rqst *);
+int		   bc_svc_process(struct svc_serv *, struct rpc_rqst *,
+			struct svc_rqst *);
+int		   svc_register(const struct svc_serv *, struct net *, const int,
+				const unsigned short, const unsigned short);
+
+void		   svc_wake_up(struct svc_serv *);
+void		   svc_reserve(struct svc_rqst *rqstp, int space);
+struct svc_pool *  svc_pool_for_cpu(struct svc_serv *serv, int cpu);
+char *		   svc_print_addr(struct svc_rqst *, char *, size_t);
+
+#define	RPC_MAX_ADDRBUFLEN	(63U)
+
+/*
+ * When we want to reduce the size of the reserved space in the response
+ * buffer, we need to take into account the size of any checksum data that
+ * may be at the end of the packet. This is difficult to determine exactly
+ * for all cases without actually generating the checksum, so we just use a
+ * static value.
+ */
+static inline void svc_reserve_auth(struct svc_rqst *rqstp, int space)
+{
+	int added_space = 0;
+
+	if (rqstp->rq_authop->flavour)
+		added_space = RPC_MAX_AUTH_SIZE;
+	svc_reserve(rqstp, space + added_space);
+}
+
+#endif /* SUNRPC_SVC_H */
diff --git a/include/linux/sunrpc/svc_rdma.h b/include/linux/sunrpc/svc_rdma.h
new file mode 100644
index 00000000..0b8e3e6b
--- /dev/null
+++ b/include/linux/sunrpc/svc_rdma.h
@@ -0,0 +1,310 @@
+/*
+ * Copyright (c) 2005-2006 Network Appliance, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the BSD-type
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *      Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *
+ *      Redistributions in binary form must reproduce the above
+ *      copyright notice, this list of conditions and the following
+ *      disclaimer in the documentation and/or other materials provided
+ *      with the distribution.
+ *
+ *      Neither the name of the Network Appliance, Inc. nor the names of
+ *      its contributors may be used to endorse or promote products
+ *      derived from this software without specific prior written
+ *      permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Author: Tom Tucker <tom@opengridcomputing.com>
+ */
+
+#ifndef SVC_RDMA_H
+#define SVC_RDMA_H
+#include <linux/sunrpc/xdr.h>
+#include <linux/sunrpc/svcsock.h>
+#include <linux/sunrpc/rpc_rdma.h>
+#include <rdma/ib_verbs.h>
+#include <rdma/rdma_cm.h>
+#define SVCRDMA_DEBUG
+
+/* RPC/RDMA parameters and stats */
+extern unsigned int svcrdma_ord;
+extern unsigned int svcrdma_max_requests;
+extern unsigned int svcrdma_max_req_size;
+
+extern atomic_t rdma_stat_recv;
+extern atomic_t rdma_stat_read;
+extern atomic_t rdma_stat_write;
+extern atomic_t rdma_stat_sq_starve;
+extern atomic_t rdma_stat_rq_starve;
+extern atomic_t rdma_stat_rq_poll;
+extern atomic_t rdma_stat_rq_prod;
+extern atomic_t rdma_stat_sq_poll;
+extern atomic_t rdma_stat_sq_prod;
+
+#define RPCRDMA_VERSION 1
+
+/*
+ * Contexts are built when an RDMA request is created and are a
+ * record of the resources that can be recovered when the request
+ * completes.
+ */
+struct svc_rdma_op_ctxt {
+	struct svc_rdma_op_ctxt *read_hdr;
+	struct svc_rdma_fastreg_mr *frmr;
+	int hdr_count;
+	struct xdr_buf arg;
+	struct list_head dto_q;
+	enum ib_wr_opcode wr_op;
+	enum ib_wc_status wc_status;
+	u32 byte_len;
+	struct svcxprt_rdma *xprt;
+	unsigned long flags;
+	enum dma_data_direction direction;
+	int count;
+	struct ib_sge sge[RPCSVC_MAXPAGES];
+	struct page *pages[RPCSVC_MAXPAGES];
+};
+
+/*
+ * NFS_ requests are mapped on the client side by the chunk lists in
+ * the RPCRDMA header. During the fetching of the RPC from the client
+ * and the writing of the reply to the client, the memory in the
+ * client and the memory in the server must be mapped as contiguous
+ * vaddr/len for access by the hardware. These data strucures keep
+ * these mappings.
+ *
+ * For an RDMA_WRITE, the 'sge' maps the RPC REPLY. For RDMA_READ, the
+ * 'sge' in the svc_rdma_req_map maps the server side RPC reply and the
+ * 'ch' field maps the read-list of the RPCRDMA header to the 'sge'
+ * mapping of the reply.
+ */
+struct svc_rdma_chunk_sge {
+	int start;		/* sge no for this chunk */
+	int count;		/* sge count for this chunk */
+};
+struct svc_rdma_fastreg_mr {
+	struct ib_mr *mr;
+	void *kva;
+	struct ib_fast_reg_page_list *page_list;
+	int page_list_len;
+	unsigned long access_flags;
+	unsigned long map_len;
+	enum dma_data_direction direction;
+	struct list_head frmr_list;
+};
+struct svc_rdma_req_map {
+	struct svc_rdma_fastreg_mr *frmr;
+	unsigned long count;
+	union {
+		struct kvec sge[RPCSVC_MAXPAGES];
+		struct svc_rdma_chunk_sge ch[RPCSVC_MAXPAGES];
+	};
+};
+#define RDMACTXT_F_FAST_UNREG	1
+#define RDMACTXT_F_LAST_CTXT	2
+
+#define	SVCRDMA_DEVCAP_FAST_REG		1	/* fast mr registration */
+#define	SVCRDMA_DEVCAP_READ_W_INV	2	/* read w/ invalidate */
+
+struct svcxprt_rdma {
+	struct svc_xprt      sc_xprt;		/* SVC transport structure */
+	struct rdma_cm_id    *sc_cm_id;		/* RDMA connection id */
+	struct list_head     sc_accept_q;	/* Conn. waiting accept */
+	int		     sc_ord;		/* RDMA read limit */
+	int                  sc_max_sge;
+
+	int                  sc_sq_depth;	/* Depth of SQ */
+	atomic_t             sc_sq_count;	/* Number of SQ WR on queue */
+
+	int                  sc_max_requests;	/* Depth of RQ */
+	int                  sc_max_req_size;	/* Size of each RQ WR buf */
+
+	struct ib_pd         *sc_pd;
+
+	atomic_t	     sc_dma_used;
+	atomic_t	     sc_ctxt_used;
+	struct list_head     sc_rq_dto_q;
+	spinlock_t	     sc_rq_dto_lock;
+	struct ib_qp         *sc_qp;
+	struct ib_cq         *sc_rq_cq;
+	struct ib_cq         *sc_sq_cq;
+	struct ib_mr         *sc_phys_mr;	/* MR for server memory */
+	u32		     sc_dev_caps;	/* distilled device caps */
+	u32		     sc_dma_lkey;	/* local dma key */
+	unsigned int	     sc_frmr_pg_list_len;
+	struct list_head     sc_frmr_q;
+	spinlock_t	     sc_frmr_q_lock;
+
+	spinlock_t	     sc_lock;		/* transport lock */
+
+	wait_queue_head_t    sc_send_wait;	/* SQ exhaustion waitlist */
+	unsigned long	     sc_flags;
+	struct list_head     sc_dto_q;		/* DTO tasklet I/O pending Q */
+	struct list_head     sc_read_complete_q;
+	struct work_struct   sc_work;
+};
+/* sc_flags */
+#define RDMAXPRT_RQ_PENDING	1
+#define RDMAXPRT_SQ_PENDING	2
+#define RDMAXPRT_CONN_PENDING	3
+
+#define RPCRDMA_LISTEN_BACKLOG  10
+/* The default ORD value is based on two outstanding full-size writes with a
+ * page size of 4k, or 32k * 2 ops / 4k = 16 outstanding RDMA_READ.  */
+#define RPCRDMA_ORD             (64/4)
+#define RPCRDMA_SQ_DEPTH_MULT   8
+#define RPCRDMA_MAX_THREADS     16
+#define RPCRDMA_MAX_REQUESTS    16
+#define RPCRDMA_MAX_REQ_SIZE    4096
+
+/* svc_rdma_marshal.c */
+extern void svc_rdma_rcl_chunk_counts(struct rpcrdma_read_chunk *,
+				      int *, int *);
+extern int svc_rdma_xdr_decode_req(struct rpcrdma_msg **, struct svc_rqst *);
+extern int svc_rdma_xdr_decode_deferred_req(struct svc_rqst *);
+extern int svc_rdma_xdr_encode_error(struct svcxprt_rdma *,
+				     struct rpcrdma_msg *,
+				     enum rpcrdma_errcode, u32 *);
+extern void svc_rdma_xdr_encode_write_list(struct rpcrdma_msg *, int);
+extern void svc_rdma_xdr_encode_reply_array(struct rpcrdma_write_array *, int);
+extern void svc_rdma_xdr_encode_array_chunk(struct rpcrdma_write_array *, int,
+					    __be32, __be64, u32);
+extern void svc_rdma_xdr_encode_reply_header(struct svcxprt_rdma *,
+					     struct rpcrdma_msg *,
+					     struct rpcrdma_msg *,
+					     enum rpcrdma_proc);
+extern int svc_rdma_xdr_get_reply_hdr_len(struct rpcrdma_msg *);
+
+/* svc_rdma_recvfrom.c */
+extern int svc_rdma_recvfrom(struct svc_rqst *);
+
+/* svc_rdma_sendto.c */
+extern int svc_rdma_sendto(struct svc_rqst *);
+
+/* svc_rdma_transport.c */
+extern int svc_rdma_send(struct svcxprt_rdma *, struct ib_send_wr *);
+extern void svc_rdma_send_error(struct svcxprt_rdma *, struct rpcrdma_msg *,
+				enum rpcrdma_errcode);
+struct page *svc_rdma_get_page(void);
+extern int svc_rdma_post_recv(struct svcxprt_rdma *);
+extern int svc_rdma_create_listen(struct svc_serv *, int, struct sockaddr *);
+extern struct svc_rdma_op_ctxt *svc_rdma_get_context(struct svcxprt_rdma *);
+extern void svc_rdma_put_context(struct svc_rdma_op_ctxt *, int);
+extern void svc_rdma_unmap_dma(struct svc_rdma_op_ctxt *ctxt);
+extern struct svc_rdma_req_map *svc_rdma_get_req_map(void);
+extern void svc_rdma_put_req_map(struct svc_rdma_req_map *);
+extern int svc_rdma_fastreg(struct svcxprt_rdma *, struct svc_rdma_fastreg_mr *);
+extern struct svc_rdma_fastreg_mr *svc_rdma_get_frmr(struct svcxprt_rdma *);
+extern void svc_rdma_put_frmr(struct svcxprt_rdma *,
+			      struct svc_rdma_fastreg_mr *);
+extern void svc_sq_reap(struct svcxprt_rdma *);
+extern void svc_rq_reap(struct svcxprt_rdma *);
+extern struct svc_xprt_class svc_rdma_class;
+extern void svc_rdma_prep_reply_hdr(struct svc_rqst *);
+
+/* svc_rdma.c */
+extern int svc_rdma_init(void);
+extern void svc_rdma_cleanup(void);
+
+/*
+ * Returns the address of the first read chunk or <nul> if no read chunk is
+ * present
+ */
+static inline struct rpcrdma_read_chunk *
+svc_rdma_get_read_chunk(struct rpcrdma_msg *rmsgp)
+{
+	struct rpcrdma_read_chunk *ch =
+		(struct rpcrdma_read_chunk *)&rmsgp->rm_body.rm_chunks[0];
+
+	if (ch->rc_discrim == 0)
+		return NULL;
+
+	return ch;
+}
+
+/*
+ * Returns the address of the first read write array element or <nul> if no
+ * write array list is present
+ */
+static inline struct rpcrdma_write_array *
+svc_rdma_get_write_array(struct rpcrdma_msg *rmsgp)
+{
+	if (rmsgp->rm_body.rm_chunks[0] != 0
+	    || rmsgp->rm_body.rm_chunks[1] == 0)
+		return NULL;
+
+	return (struct rpcrdma_write_array *)&rmsgp->rm_body.rm_chunks[1];
+}
+
+/*
+ * Returns the address of the first reply array element or <nul> if no
+ * reply array is present
+ */
+static inline struct rpcrdma_write_array *
+svc_rdma_get_reply_array(struct rpcrdma_msg *rmsgp)
+{
+	struct rpcrdma_read_chunk *rch;
+	struct rpcrdma_write_array *wr_ary;
+	struct rpcrdma_write_array *rp_ary;
+
+	/* XXX: Need to fix when reply list may occur with read-list and/or
+	 * write list */
+	if (rmsgp->rm_body.rm_chunks[0] != 0 ||
+	    rmsgp->rm_body.rm_chunks[1] != 0)
+		return NULL;
+
+	rch = svc_rdma_get_read_chunk(rmsgp);
+	if (rch) {
+		while (rch->rc_discrim)
+			rch++;
+
+		/* The reply list follows an empty write array located
+		 * at 'rc_position' here. The reply array is at rc_target.
+		 */
+		rp_ary = (struct rpcrdma_write_array *)&rch->rc_target;
+
+		goto found_it;
+	}
+
+	wr_ary = svc_rdma_get_write_array(rmsgp);
+	if (wr_ary) {
+		rp_ary = (struct rpcrdma_write_array *)
+			&wr_ary->
+			wc_array[ntohl(wr_ary->wc_nchunks)].wc_target.rs_length;
+
+		goto found_it;
+	}
+
+	/* No read list, no write list */
+	rp_ary = (struct rpcrdma_write_array *)
+		&rmsgp->rm_body.rm_chunks[2];
+
+ found_it:
+	if (rp_ary->wc_discrim == 0)
+		return NULL;
+
+	return rp_ary;
+}
+#endif
diff --git a/include/linux/sunrpc/svc_xprt.h b/include/linux/sunrpc/svc_xprt.h
new file mode 100644
index 00000000..b3f64b12
--- /dev/null
+++ b/include/linux/sunrpc/svc_xprt.h
@@ -0,0 +1,208 @@
+/*
+ * linux/include/linux/sunrpc/svc_xprt.h
+ *
+ * RPC server transport I/O
+ */
+
+#ifndef SUNRPC_SVC_XPRT_H
+#define SUNRPC_SVC_XPRT_H
+
+#include <linux/sunrpc/svc.h>
+
+struct module;
+
+struct svc_xprt_ops {
+	struct svc_xprt	*(*xpo_create)(struct svc_serv *,
+				       struct net *net,
+				       struct sockaddr *, int,
+				       int);
+	struct svc_xprt	*(*xpo_accept)(struct svc_xprt *);
+	int		(*xpo_has_wspace)(struct svc_xprt *);
+	int		(*xpo_recvfrom)(struct svc_rqst *);
+	void		(*xpo_prep_reply_hdr)(struct svc_rqst *);
+	int		(*xpo_sendto)(struct svc_rqst *);
+	void		(*xpo_release_rqst)(struct svc_rqst *);
+	void		(*xpo_detach)(struct svc_xprt *);
+	void		(*xpo_free)(struct svc_xprt *);
+};
+
+struct svc_xprt_class {
+	const char		*xcl_name;
+	struct module		*xcl_owner;
+	struct svc_xprt_ops	*xcl_ops;
+	struct list_head	xcl_list;
+	u32			xcl_max_payload;
+};
+
+/*
+ * This is embedded in an object that wants a callback before deleting
+ * an xprt; intended for use by NFSv4.1, which needs to know when a
+ * client's tcp connection (and hence possibly a backchannel) goes away.
+ */
+struct svc_xpt_user {
+	struct list_head list;
+	void (*callback)(struct svc_xpt_user *);
+};
+
+struct svc_xprt {
+	struct svc_xprt_class	*xpt_class;
+	struct svc_xprt_ops	*xpt_ops;
+	struct kref		xpt_ref;
+	struct list_head	xpt_list;
+	struct list_head	xpt_ready;
+	unsigned long		xpt_flags;
+#define	XPT_BUSY	0		/* enqueued/receiving */
+#define	XPT_CONN	1		/* conn pending */
+#define	XPT_CLOSE	2		/* dead or dying */
+#define	XPT_DATA	3		/* data pending */
+#define	XPT_TEMP	4		/* connected transport */
+#define	XPT_DEAD	6		/* transport closed */
+#define	XPT_CHNGBUF	7		/* need to change snd/rcv buf sizes */
+#define	XPT_DEFERRED	8		/* deferred request pending */
+#define	XPT_OLD		9		/* used for xprt aging mark+sweep */
+#define	XPT_DETACHED	10		/* detached from tempsocks list */
+#define XPT_LISTENER	11		/* listening endpoint */
+#define XPT_CACHE_AUTH	12		/* cache auth info */
+
+	struct svc_serv		*xpt_server;	/* service for transport */
+	atomic_t    	    	xpt_reserved;	/* space on outq that is rsvd */
+	struct mutex		xpt_mutex;	/* to serialize sending data */
+	spinlock_t		xpt_lock;	/* protects sk_deferred
+						 * and xpt_auth_cache */
+	void			*xpt_auth_cache;/* auth cache */
+	struct list_head	xpt_deferred;	/* deferred requests that need
+						 * to be revisted */
+	struct sockaddr_storage	xpt_local;	/* local address */
+	size_t			xpt_locallen;	/* length of address */
+	struct sockaddr_storage	xpt_remote;	/* remote peer's address */
+	size_t			xpt_remotelen;	/* length of address */
+	struct rpc_wait_queue	xpt_bc_pending;	/* backchannel wait queue */
+	struct list_head	xpt_users;	/* callbacks on free */
+
+	struct net		*xpt_net;
+	struct rpc_xprt		*xpt_bc_xprt;	/* NFSv4.1 backchannel */
+};
+
+static inline void unregister_xpt_user(struct svc_xprt *xpt, struct svc_xpt_user *u)
+{
+	spin_lock(&xpt->xpt_lock);
+	list_del_init(&u->list);
+	spin_unlock(&xpt->xpt_lock);
+}
+
+static inline int register_xpt_user(struct svc_xprt *xpt, struct svc_xpt_user *u)
+{
+	spin_lock(&xpt->xpt_lock);
+	if (test_bit(XPT_CLOSE, &xpt->xpt_flags)) {
+		/*
+		 * The connection is about to be deleted soon (or,
+		 * worse, may already be deleted--in which case we've
+		 * already notified the xpt_users).
+		 */
+		spin_unlock(&xpt->xpt_lock);
+		return -ENOTCONN;
+	}
+	list_add(&u->list, &xpt->xpt_users);
+	spin_unlock(&xpt->xpt_lock);
+	return 0;
+}
+
+int	svc_reg_xprt_class(struct svc_xprt_class *);
+void	svc_unreg_xprt_class(struct svc_xprt_class *);
+void	svc_xprt_init(struct net *, struct svc_xprt_class *, struct svc_xprt *,
+		      struct svc_serv *);
+int	svc_create_xprt(struct svc_serv *, const char *, struct net *,
+			const int, const unsigned short, int);
+void	svc_xprt_enqueue(struct svc_xprt *xprt);
+void	svc_xprt_received(struct svc_xprt *);
+void	svc_xprt_put(struct svc_xprt *xprt);
+void	svc_xprt_copy_addrs(struct svc_rqst *rqstp, struct svc_xprt *xprt);
+void	svc_close_xprt(struct svc_xprt *xprt);
+int	svc_port_is_privileged(struct sockaddr *sin);
+int	svc_print_xprts(char *buf, int maxlen);
+struct	svc_xprt *svc_find_xprt(struct svc_serv *serv, const char *xcl_name,
+			struct net *net, const sa_family_t af,
+			const unsigned short port);
+int	svc_xprt_names(struct svc_serv *serv, char *buf, const int buflen);
+
+static inline void svc_xprt_get(struct svc_xprt *xprt)
+{
+	kref_get(&xprt->xpt_ref);
+}
+static inline void svc_xprt_set_local(struct svc_xprt *xprt,
+				      const struct sockaddr *sa,
+				      const size_t salen)
+{
+	memcpy(&xprt->xpt_local, sa, salen);
+	xprt->xpt_locallen = salen;
+}
+static inline void svc_xprt_set_remote(struct svc_xprt *xprt,
+				       const struct sockaddr *sa,
+				       const size_t salen)
+{
+	memcpy(&xprt->xpt_remote, sa, salen);
+	xprt->xpt_remotelen = salen;
+}
+static inline unsigned short svc_addr_port(const struct sockaddr *sa)
+{
+	const struct sockaddr_in *sin = (const struct sockaddr_in *)sa;
+	const struct sockaddr_in6 *sin6 = (const struct sockaddr_in6 *)sa;
+
+	switch (sa->sa_family) {
+	case AF_INET:
+		return ntohs(sin->sin_port);
+	case AF_INET6:
+		return ntohs(sin6->sin6_port);
+	}
+
+	return 0;
+}
+
+static inline size_t svc_addr_len(const struct sockaddr *sa)
+{
+	switch (sa->sa_family) {
+	case AF_INET:
+		return sizeof(struct sockaddr_in);
+	case AF_INET6:
+		return sizeof(struct sockaddr_in6);
+	}
+
+	return 0;
+}
+
+static inline unsigned short svc_xprt_local_port(const struct svc_xprt *xprt)
+{
+	return svc_addr_port((const struct sockaddr *)&xprt->xpt_local);
+}
+
+static inline unsigned short svc_xprt_remote_port(const struct svc_xprt *xprt)
+{
+	return svc_addr_port((const struct sockaddr *)&xprt->xpt_remote);
+}
+
+static inline char *__svc_print_addr(const struct sockaddr *addr,
+				     char *buf, const size_t len)
+{
+	const struct sockaddr_in *sin = (const struct sockaddr_in *)addr;
+	const struct sockaddr_in6 *sin6 = (const struct sockaddr_in6 *)addr;
+
+	switch (addr->sa_family) {
+	case AF_INET:
+		snprintf(buf, len, "%pI4, port=%u", &sin->sin_addr,
+			ntohs(sin->sin_port));
+		break;
+
+	case AF_INET6:
+		snprintf(buf, len, "%pI6, port=%u",
+			 &sin6->sin6_addr,
+			ntohs(sin6->sin6_port));
+		break;
+
+	default:
+		snprintf(buf, len, "unknown address type: %d", addr->sa_family);
+		break;
+	}
+
+	return buf;
+}
+#endif /* SUNRPC_SVC_XPRT_H */
diff --git a/include/linux/sunrpc/svcauth.h b/include/linux/sunrpc/svcauth.h
new file mode 100644
index 00000000..548790e9
--- /dev/null
+++ b/include/linux/sunrpc/svcauth.h
@@ -0,0 +1,180 @@
+/*
+ * linux/include/linux/sunrpc/svcauth.h
+ *
+ * RPC server-side authentication stuff.
+ *
+ * Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef _LINUX_SUNRPC_SVCAUTH_H_
+#define _LINUX_SUNRPC_SVCAUTH_H_
+
+#ifdef __KERNEL__
+
+#include <linux/string.h>
+#include <linux/sunrpc/msg_prot.h>
+#include <linux/sunrpc/cache.h>
+#include <linux/hash.h>
+
+#define SVC_CRED_NGROUPS	32
+struct svc_cred {
+	uid_t			cr_uid;
+	gid_t			cr_gid;
+	struct group_info	*cr_group_info;
+};
+
+struct svc_rqst;		/* forward decl */
+struct in6_addr;
+
+/* Authentication is done in the context of a domain.
+ *
+ * Currently, the nfs server uses the auth_domain to stand
+ * for the "client" listed in /etc/exports.
+ *
+ * More generally, a domain might represent a group of clients using
+ * a common mechanism for authentication and having a common mapping
+ * between local identity (uid) and network identity.  All clients
+ * in a domain have similar general access rights.  Each domain can
+ * contain multiple principals which will have different specific right
+ * based on normal Discretionary Access Control.
+ *
+ * A domain is created by an authentication flavour module based on name
+ * only.  Userspace then fills in detail on demand.
+ *
+ * In the case of auth_unix and auth_null, the auth_domain is also
+ * associated with entries in another cache representing the mapping
+ * of ip addresses to the given client.
+ */
+struct auth_domain {
+	struct kref		ref;
+	struct hlist_node	hash;
+	char			*name;
+	struct auth_ops		*flavour;
+};
+
+/*
+ * Each authentication flavour registers an auth_ops
+ * structure.
+ * name is simply the name.
+ * flavour gives the auth flavour. It determines where the flavour is registered
+ * accept() is given a request and should verify it.
+ *   It should inspect the authenticator and verifier, and possibly the data.
+ *    If there is a problem with the authentication *authp should be set.
+ *    The return value of accept() can indicate:
+ *      OK - authorised. client and credential are set in rqstp.
+ *           reqbuf points to arguments
+ *           resbuf points to good place for results.  verfier
+ *             is (probably) already in place.  Certainly space is
+ *	       reserved for it.
+ *      DROP - simply drop the request. It may have been deferred
+ *      GARBAGE - rpc garbage_args error
+ *      SYSERR - rpc system_err error
+ *      DENIED - authp holds reason for denial.
+ *      COMPLETE - the reply is encoded already and ready to be sent; no
+ *		further processing is necessary.  (This is used for processing
+ *		null procedure calls which are used to set up encryption
+ *		contexts.)
+ *
+ *   accept is passed the proc number so that it can accept NULL rpc requests
+ *   even if it cannot authenticate the client (as is sometimes appropriate).
+ *
+ * release() is given a request after the procedure has been run.
+ *  It should sign/encrypt the results if needed
+ * It should return:
+ *    OK - the resbuf is ready to be sent
+ *    DROP - the reply should be quitely dropped
+ *    DENIED - authp holds a reason for MSG_DENIED
+ *    SYSERR - rpc system_err
+ *
+ * domain_release()
+ *   This call releases a domain.
+ * set_client()
+ *   Givens a pending request (struct svc_rqst), finds and assigns
+ *   an appropriate 'auth_domain' as the client.
+ */
+struct auth_ops {
+	char *	name;
+	struct module *owner;
+	int	flavour;
+	int	(*accept)(struct svc_rqst *rq, __be32 *authp);
+	int	(*release)(struct svc_rqst *rq);
+	void	(*domain_release)(struct auth_domain *);
+	int	(*set_client)(struct svc_rqst *rq);
+};
+
+#define	SVC_GARBAGE	1
+#define	SVC_SYSERR	2
+#define	SVC_VALID	3
+#define	SVC_NEGATIVE	4
+#define	SVC_OK		5
+#define	SVC_DROP	6
+#define	SVC_CLOSE	7	/* Like SVC_DROP, but request is definitely
+				 * lost so if there is a tcp connection, it
+				 * should be closed
+				 */
+#define	SVC_DENIED	8
+#define	SVC_PENDING	9
+#define	SVC_COMPLETE	10
+
+struct svc_xprt;
+
+extern int	svc_authenticate(struct svc_rqst *rqstp, __be32 *authp);
+extern int	svc_authorise(struct svc_rqst *rqstp);
+extern int	svc_set_client(struct svc_rqst *rqstp);
+extern int	svc_auth_register(rpc_authflavor_t flavor, struct auth_ops *aops);
+extern void	svc_auth_unregister(rpc_authflavor_t flavor);
+
+extern struct auth_domain *unix_domain_find(char *name);
+extern void auth_domain_put(struct auth_domain *item);
+extern int auth_unix_add_addr(struct net *net, struct in6_addr *addr, struct auth_domain *dom);
+extern struct auth_domain *auth_domain_lookup(char *name, struct auth_domain *new);
+extern struct auth_domain *auth_domain_find(char *name);
+extern struct auth_domain *auth_unix_lookup(struct net *net, struct in6_addr *addr);
+extern int auth_unix_forget_old(struct auth_domain *dom);
+extern void svcauth_unix_purge(void);
+extern void svcauth_unix_info_release(struct svc_xprt *xpt);
+extern int svcauth_unix_set_client(struct svc_rqst *rqstp);
+
+extern int unix_gid_cache_create(struct net *net);
+extern void unix_gid_cache_destroy(struct net *net);
+
+static inline unsigned long hash_str(char *name, int bits)
+{
+	unsigned long hash = 0;
+	unsigned long l = 0;
+	int len = 0;
+	unsigned char c;
+	do {
+		if (unlikely(!(c = *name++))) {
+			c = (char)len; len = -1;
+		}
+		l = (l << 8) | c;
+		len++;
+		if ((len & (BITS_PER_LONG/8-1))==0)
+			hash = hash_long(hash^l, BITS_PER_LONG);
+	} while (len);
+	return hash >> (BITS_PER_LONG - bits);
+}
+
+static inline unsigned long hash_mem(char *buf, int length, int bits)
+{
+	unsigned long hash = 0;
+	unsigned long l = 0;
+	int len = 0;
+	unsigned char c;
+	do {
+		if (len == length) {
+			c = (char)len; len = -1;
+		} else
+			c = *buf++;
+		l = (l << 8) | c;
+		len++;
+		if ((len & (BITS_PER_LONG/8-1))==0)
+			hash = hash_long(hash^l, BITS_PER_LONG);
+	} while (len);
+	return hash >> (BITS_PER_LONG - bits);
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_SUNRPC_SVCAUTH_H_ */
diff --git a/include/linux/sunrpc/svcauth_gss.h b/include/linux/sunrpc/svcauth_gss.h
new file mode 100644
index 00000000..7c32daa0
--- /dev/null
+++ b/include/linux/sunrpc/svcauth_gss.h
@@ -0,0 +1,28 @@
+/*
+ * linux/include/linux/sunrpc/svcauth_gss.h
+ *
+ * Bruce Fields <bfields@umich.edu>
+ * Copyright (c) 2002 The Regents of the University of Michigan
+ */
+
+#ifndef _LINUX_SUNRPC_SVCAUTH_GSS_H
+#define _LINUX_SUNRPC_SVCAUTH_GSS_H
+
+#ifdef __KERNEL__
+#include <linux/sched.h>
+#include <linux/sunrpc/types.h>
+#include <linux/sunrpc/xdr.h>
+#include <linux/sunrpc/svcauth.h>
+#include <linux/sunrpc/svcsock.h>
+#include <linux/sunrpc/auth_gss.h>
+
+int gss_svc_init(void);
+void gss_svc_shutdown(void);
+int gss_svc_init_net(struct net *net);
+void gss_svc_shutdown_net(struct net *net);
+int svcauth_gss_register_pseudoflavor(u32 pseudoflavor, char * name);
+u32 svcauth_gss_flavor(struct auth_domain *dom);
+char *svc_gss_principal(struct svc_rqst *);
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_SUNRPC_SVCAUTH_GSS_H */
diff --git a/include/linux/sunrpc/svcsock.h b/include/linux/sunrpc/svcsock.h
new file mode 100644
index 00000000..cb4ac69e
--- /dev/null
+++ b/include/linux/sunrpc/svcsock.h
@@ -0,0 +1,59 @@
+/*
+ * linux/include/linux/sunrpc/svcsock.h
+ *
+ * RPC server socket I/O.
+ *
+ * Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef SUNRPC_SVCSOCK_H
+#define SUNRPC_SVCSOCK_H
+
+#include <linux/sunrpc/svc.h>
+#include <linux/sunrpc/svc_xprt.h>
+
+/*
+ * RPC server socket.
+ */
+struct svc_sock {
+	struct svc_xprt		sk_xprt;
+	struct socket *		sk_sock;	/* berkeley socket layer */
+	struct sock *		sk_sk;		/* INET layer */
+
+	/* We keep the old state_change and data_ready CB's here */
+	void			(*sk_ostate)(struct sock *);
+	void			(*sk_odata)(struct sock *, int bytes);
+	void			(*sk_owspace)(struct sock *);
+
+	/* private TCP part */
+	u32			sk_reclen;	/* length of record */
+	u32			sk_tcplen;	/* current read length */
+	struct page *		sk_pages[RPCSVC_MAXPAGES];	/* received data */
+};
+
+/*
+ * Function prototypes.
+ */
+void		svc_close_net(struct svc_serv *, struct net *);
+int		svc_recv(struct svc_rqst *, long);
+int		svc_send(struct svc_rqst *);
+void		svc_drop(struct svc_rqst *);
+void		svc_sock_update_bufs(struct svc_serv *serv);
+int		svc_sock_names(struct svc_serv *serv, char *buf,
+					const size_t buflen,
+					const char *toclose);
+int		svc_addsock(struct svc_serv *serv, const int fd,
+					char *name_return, const size_t len);
+void		svc_init_xprt_sock(void);
+void		svc_cleanup_xprt_sock(void);
+struct svc_xprt *svc_sock_create(struct svc_serv *serv, int prot);
+void		svc_sock_destroy(struct svc_xprt *);
+
+/*
+ * svc_makesock socket characteristics
+ */
+#define SVC_SOCK_DEFAULTS	(0U)
+#define SVC_SOCK_ANONYMOUS	(1U << 0)	/* don't register with pmap */
+#define SVC_SOCK_TEMPORARY	(1U << 1)	/* flag socket as temporary */
+
+#endif /* SUNRPC_SVCSOCK_H */
diff --git a/include/linux/sunrpc/timer.h b/include/linux/sunrpc/timer.h
new file mode 100644
index 00000000..697d6e69
--- /dev/null
+++ b/include/linux/sunrpc/timer.h
@@ -0,0 +1,49 @@
+/*
+ *  linux/include/linux/sunrpc/timer.h
+ *
+ *  Declarations for the RPC transport timer.
+ *
+ *  Copyright (C) 2002 Trond Myklebust <trond.myklebust@fys.uio.no>
+ */
+
+#ifndef _LINUX_SUNRPC_TIMER_H
+#define _LINUX_SUNRPC_TIMER_H
+
+#include <linux/atomic.h>
+
+struct rpc_rtt {
+	unsigned long timeo;	/* default timeout value */
+	unsigned long srtt[5];	/* smoothed round trip time << 3 */
+	unsigned long sdrtt[5];	/* smoothed medium deviation of RTT */
+	int ntimeouts[5];	/* Number of timeouts for the last request */
+};
+
+
+extern void rpc_init_rtt(struct rpc_rtt *rt, unsigned long timeo);
+extern void rpc_update_rtt(struct rpc_rtt *rt, unsigned timer, long m);
+extern unsigned long rpc_calc_rto(struct rpc_rtt *rt, unsigned timer);
+
+static inline void rpc_set_timeo(struct rpc_rtt *rt, int timer, int ntimeo)
+{
+	int *t;
+	if (!timer)
+		return;
+	t = &rt->ntimeouts[timer-1];
+	if (ntimeo < *t) {
+		if (*t > 0)
+			(*t)--;
+	} else {
+		if (ntimeo > 8)
+			ntimeo = 8;
+		*t = ntimeo;
+	}
+}
+
+static inline int rpc_ntimeo(struct rpc_rtt *rt, int timer)
+{
+	if (!timer)
+		return 0;
+	return rt->ntimeouts[timer-1];
+}
+
+#endif /* _LINUX_SUNRPC_TIMER_H */
diff --git a/include/linux/sunrpc/types.h b/include/linux/sunrpc/types.h
new file mode 100644
index 00000000..d222f475
--- /dev/null
+++ b/include/linux/sunrpc/types.h
@@ -0,0 +1,22 @@
+/*
+ * linux/include/linux/sunrpc/types.h
+ *
+ * Generic types and misc stuff for RPC.
+ *
+ * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef _LINUX_SUNRPC_TYPES_H_
+#define _LINUX_SUNRPC_TYPES_H_
+
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <linux/sunrpc/debug.h>
+#include <linux/list.h>
+
+/*
+ * Shorthands
+ */
+#define signalled()		(signal_pending(current))
+
+#endif /* _LINUX_SUNRPC_TYPES_H_ */
diff --git a/include/linux/sunrpc/xdr.h b/include/linux/sunrpc/xdr.h
new file mode 100644
index 00000000..af70af33
--- /dev/null
+++ b/include/linux/sunrpc/xdr.h
@@ -0,0 +1,231 @@
+/*
+ * XDR standard data types and function declarations
+ *
+ * Copyright (C) 1995-1997 Olaf Kirch <okir@monad.swb.de>
+ *
+ * Based on:
+ *   RFC 4506 "XDR: External Data Representation Standard", May 2006
+ */
+
+#ifndef _SUNRPC_XDR_H_
+#define _SUNRPC_XDR_H_
+
+#ifdef __KERNEL__
+
+#include <linux/uio.h>
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+#include <linux/scatterlist.h>
+
+/*
+ * Buffer adjustment
+ */
+#define XDR_QUADLEN(l)		(((l) + 3) >> 2)
+
+/*
+ * Generic opaque `network object.' At the kernel level, this type
+ * is used only by lockd.
+ */
+#define XDR_MAX_NETOBJ		1024
+struct xdr_netobj {
+	unsigned int		len;
+	u8 *			data;
+};
+
+/*
+ * This is the legacy generic XDR function. rqstp is either a rpc_rqst
+ * (client side) or svc_rqst pointer (server side).
+ * Encode functions always assume there's enough room in the buffer.
+ */
+typedef int	(*kxdrproc_t)(void *rqstp, __be32 *data, void *obj);
+
+/*
+ * Basic structure for transmission/reception of a client XDR message.
+ * Features a header (for a linear buffer containing RPC headers
+ * and the data payload for short messages), and then an array of
+ * pages.
+ * The tail iovec allows you to append data after the page array. Its
+ * main interest is for appending padding to the pages in order to
+ * satisfy the int_32-alignment requirements in RFC1832.
+ *
+ * For the future, we might want to string several of these together
+ * in a list if anybody wants to make use of NFSv4 COMPOUND
+ * operations and/or has a need for scatter/gather involving pages.
+ */
+struct xdr_buf {
+	struct kvec	head[1],	/* RPC header + non-page data */
+			tail[1];	/* Appended after page data */
+
+	struct page **	pages;		/* Array of contiguous pages */
+	unsigned int	page_base,	/* Start of page data */
+			page_len,	/* Length of page data */
+			flags;		/* Flags for data disposition */
+#define XDRBUF_READ		0x01		/* target of file read */
+#define XDRBUF_WRITE		0x02		/* source of file write */
+
+	unsigned int	buflen,		/* Total length of storage buffer */
+			len;		/* Length of XDR encoded message */
+};
+
+/*
+ * pre-xdr'ed macros.
+ */
+
+#define	xdr_zero	cpu_to_be32(0)
+#define	xdr_one		cpu_to_be32(1)
+#define	xdr_two		cpu_to_be32(2)
+
+#define	rpc_success		cpu_to_be32(RPC_SUCCESS)
+#define	rpc_prog_unavail	cpu_to_be32(RPC_PROG_UNAVAIL)
+#define	rpc_prog_mismatch	cpu_to_be32(RPC_PROG_MISMATCH)
+#define	rpc_proc_unavail	cpu_to_be32(RPC_PROC_UNAVAIL)
+#define	rpc_garbage_args	cpu_to_be32(RPC_GARBAGE_ARGS)
+#define	rpc_system_err		cpu_to_be32(RPC_SYSTEM_ERR)
+#define	rpc_drop_reply		cpu_to_be32(RPC_DROP_REPLY)
+
+#define	rpc_auth_ok		cpu_to_be32(RPC_AUTH_OK)
+#define	rpc_autherr_badcred	cpu_to_be32(RPC_AUTH_BADCRED)
+#define	rpc_autherr_rejectedcred cpu_to_be32(RPC_AUTH_REJECTEDCRED)
+#define	rpc_autherr_badverf	cpu_to_be32(RPC_AUTH_BADVERF)
+#define	rpc_autherr_rejectedverf cpu_to_be32(RPC_AUTH_REJECTEDVERF)
+#define	rpc_autherr_tooweak	cpu_to_be32(RPC_AUTH_TOOWEAK)
+#define	rpcsec_gsserr_credproblem	cpu_to_be32(RPCSEC_GSS_CREDPROBLEM)
+#define	rpcsec_gsserr_ctxproblem	cpu_to_be32(RPCSEC_GSS_CTXPROBLEM)
+#define	rpc_autherr_oldseqnum	cpu_to_be32(101)
+
+/*
+ * Miscellaneous XDR helper functions
+ */
+__be32 *xdr_encode_opaque_fixed(__be32 *p, const void *ptr, unsigned int len);
+__be32 *xdr_encode_opaque(__be32 *p, const void *ptr, unsigned int len);
+__be32 *xdr_encode_string(__be32 *p, const char *s);
+__be32 *xdr_decode_string_inplace(__be32 *p, char **sp, unsigned int *lenp,
+			unsigned int maxlen);
+__be32 *xdr_encode_netobj(__be32 *p, const struct xdr_netobj *);
+__be32 *xdr_decode_netobj(__be32 *p, struct xdr_netobj *);
+
+void	xdr_encode_pages(struct xdr_buf *, struct page **, unsigned int,
+			 unsigned int);
+void	xdr_inline_pages(struct xdr_buf *, unsigned int,
+			 struct page **, unsigned int, unsigned int);
+void	xdr_terminate_string(struct xdr_buf *, const u32);
+
+static inline __be32 *xdr_encode_array(__be32 *p, const void *s, unsigned int len)
+{
+	return xdr_encode_opaque(p, s, len);
+}
+
+/*
+ * Decode 64bit quantities (NFSv3 support)
+ */
+static inline __be32 *
+xdr_encode_hyper(__be32 *p, __u64 val)
+{
+	put_unaligned_be64(val, p);
+	return p + 2;
+}
+
+static inline __be32 *
+xdr_decode_hyper(__be32 *p, __u64 *valp)
+{
+	*valp = get_unaligned_be64(p);
+	return p + 2;
+}
+
+static inline __be32 *
+xdr_decode_opaque_fixed(__be32 *p, void *ptr, unsigned int len)
+{
+	memcpy(ptr, p, len);
+	return p + XDR_QUADLEN(len);
+}
+
+/*
+ * Adjust kvec to reflect end of xdr'ed data (RPC client XDR)
+ */
+static inline int
+xdr_adjust_iovec(struct kvec *iov, __be32 *p)
+{
+	return iov->iov_len = ((u8 *) p - (u8 *) iov->iov_base);
+}
+
+/*
+ * XDR buffer helper functions
+ */
+extern void xdr_shift_buf(struct xdr_buf *, size_t);
+extern void xdr_buf_from_iov(struct kvec *, struct xdr_buf *);
+extern int xdr_buf_subsegment(struct xdr_buf *, struct xdr_buf *, unsigned int, unsigned int);
+extern int xdr_buf_read_netobj(struct xdr_buf *, struct xdr_netobj *, unsigned int);
+extern int read_bytes_from_xdr_buf(struct xdr_buf *, unsigned int, void *, unsigned int);
+extern int write_bytes_to_xdr_buf(struct xdr_buf *, unsigned int, void *, unsigned int);
+
+/*
+ * Helper structure for copying from an sk_buff.
+ */
+struct xdr_skb_reader {
+	struct sk_buff	*skb;
+	unsigned int	offset;
+	size_t		count;
+	__wsum		csum;
+};
+
+typedef size_t (*xdr_skb_read_actor)(struct xdr_skb_reader *desc, void *to, size_t len);
+
+size_t xdr_skb_read_bits(struct xdr_skb_reader *desc, void *to, size_t len);
+extern int csum_partial_copy_to_xdr(struct xdr_buf *, struct sk_buff *);
+extern ssize_t xdr_partial_copy_from_skb(struct xdr_buf *, unsigned int,
+		struct xdr_skb_reader *, xdr_skb_read_actor);
+
+extern int xdr_encode_word(struct xdr_buf *, unsigned int, u32);
+extern int xdr_decode_word(struct xdr_buf *, unsigned int, u32 *);
+
+struct xdr_array2_desc;
+typedef int (*xdr_xcode_elem_t)(struct xdr_array2_desc *desc, void *elem);
+struct xdr_array2_desc {
+	unsigned int elem_size;
+	unsigned int array_len;
+	unsigned int array_maxlen;
+	xdr_xcode_elem_t xcode;
+};
+
+extern int xdr_decode_array2(struct xdr_buf *buf, unsigned int base,
+			     struct xdr_array2_desc *desc);
+extern int xdr_encode_array2(struct xdr_buf *buf, unsigned int base,
+			     struct xdr_array2_desc *desc);
+extern void _copy_from_pages(char *p, struct page **pages, size_t pgbase,
+			     size_t len);
+
+/*
+ * Provide some simple tools for XDR buffer overflow-checking etc.
+ */
+struct xdr_stream {
+	__be32 *p;		/* start of available buffer */
+	struct xdr_buf *buf;	/* XDR buffer to read/write */
+
+	__be32 *end;		/* end of available buffer space */
+	struct kvec *iov;	/* pointer to the current kvec */
+	struct kvec scratch;	/* Scratch buffer */
+	struct page **page_ptr;	/* pointer to the current page */
+};
+
+/*
+ * These are the xdr_stream style generic XDR encode and decode functions.
+ */
+typedef void	(*kxdreproc_t)(void *rqstp, struct xdr_stream *xdr, void *obj);
+typedef int	(*kxdrdproc_t)(void *rqstp, struct xdr_stream *xdr, void *obj);
+
+extern void xdr_init_encode(struct xdr_stream *xdr, struct xdr_buf *buf, __be32 *p);
+extern __be32 *xdr_reserve_space(struct xdr_stream *xdr, size_t nbytes);
+extern void xdr_write_pages(struct xdr_stream *xdr, struct page **pages,
+		unsigned int base, unsigned int len);
+extern void xdr_init_decode(struct xdr_stream *xdr, struct xdr_buf *buf, __be32 *p);
+extern void xdr_init_decode_pages(struct xdr_stream *xdr, struct xdr_buf *buf,
+		struct page **pages, unsigned int len);
+extern void xdr_set_scratch_buffer(struct xdr_stream *xdr, void *buf, size_t buflen);
+extern __be32 *xdr_inline_decode(struct xdr_stream *xdr, size_t nbytes);
+extern void xdr_read_pages(struct xdr_stream *xdr, unsigned int len);
+extern void xdr_enter_page(struct xdr_stream *xdr, unsigned int len);
+extern int xdr_process_buf(struct xdr_buf *buf, unsigned int offset, unsigned int len, int (*actor)(struct scatterlist *, void *), void *data);
+
+#endif /* __KERNEL__ */
+
+#endif /* _SUNRPC_XDR_H_ */
diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h
new file mode 100644
index 00000000..77d278de
--- /dev/null
+++ b/include/linux/sunrpc/xprt.h
@@ -0,0 +1,404 @@
+/*
+ *  linux/include/linux/sunrpc/xprt.h
+ *
+ *  Declarations for the RPC transport interface.
+ *
+ *  Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef _LINUX_SUNRPC_XPRT_H
+#define _LINUX_SUNRPC_XPRT_H
+
+#include <linux/uio.h>
+#include <linux/socket.h>
+#include <linux/in.h>
+#include <linux/ktime.h>
+#include <linux/sunrpc/sched.h>
+#include <linux/sunrpc/xdr.h>
+#include <linux/sunrpc/msg_prot.h>
+
+#ifdef __KERNEL__
+
+#define RPC_MIN_SLOT_TABLE	(2U)
+#define RPC_DEF_SLOT_TABLE	(16U)
+#define RPC_MAX_SLOT_TABLE_LIMIT	(65536U)
+#define RPC_MAX_SLOT_TABLE	RPC_MAX_SLOT_TABLE_LIMIT
+
+/*
+ * This describes a timeout strategy
+ */
+struct rpc_timeout {
+	unsigned long		to_initval,		/* initial timeout */
+				to_maxval,		/* max timeout */
+				to_increment;		/* if !exponential */
+	unsigned int		to_retries;		/* max # of retries */
+	unsigned char		to_exponential;
+};
+
+enum rpc_display_format_t {
+	RPC_DISPLAY_ADDR = 0,
+	RPC_DISPLAY_PORT,
+	RPC_DISPLAY_PROTO,
+	RPC_DISPLAY_HEX_ADDR,
+	RPC_DISPLAY_HEX_PORT,
+	RPC_DISPLAY_NETID,
+	RPC_DISPLAY_MAX,
+};
+
+struct rpc_task;
+struct rpc_xprt;
+struct seq_file;
+
+/*
+ * This describes a complete RPC request
+ */
+struct rpc_rqst {
+	/*
+	 * This is the user-visible part
+	 */
+	struct rpc_xprt *	rq_xprt;		/* RPC client */
+	struct xdr_buf		rq_snd_buf;		/* send buffer */
+	struct xdr_buf		rq_rcv_buf;		/* recv buffer */
+
+	/*
+	 * This is the private part
+	 */
+	struct rpc_task *	rq_task;	/* RPC task data */
+	struct rpc_cred *	rq_cred;	/* Bound cred */
+	__be32			rq_xid;		/* request XID */
+	int			rq_cong;	/* has incremented xprt->cong */
+	u32			rq_seqno;	/* gss seq no. used on req. */
+	int			rq_enc_pages_num;
+	struct page		**rq_enc_pages;	/* scratch pages for use by
+						   gss privacy code */
+	void (*rq_release_snd_buf)(struct rpc_rqst *); /* release rq_enc_pages */
+	struct list_head	rq_list;
+
+	__u32 *			rq_buffer;	/* XDR encode buffer */
+	size_t			rq_callsize,
+				rq_rcvsize;
+	size_t			rq_xmit_bytes_sent;	/* total bytes sent */
+	size_t			rq_reply_bytes_recvd;	/* total reply bytes */
+							/* received */
+
+	struct xdr_buf		rq_private_buf;		/* The receive buffer
+							 * used in the softirq.
+							 */
+	unsigned long		rq_majortimeo;	/* major timeout alarm */
+	unsigned long		rq_timeout;	/* Current timeout value */
+	ktime_t			rq_rtt;		/* round-trip time */
+	unsigned int		rq_retries;	/* # of retries */
+	unsigned int		rq_connect_cookie;
+						/* A cookie used to track the
+						   state of the transport
+						   connection */
+	
+	/*
+	 * Partial send handling
+	 */
+	u32			rq_bytes_sent;	/* Bytes we have sent */
+
+	ktime_t			rq_xtime;	/* transmit time stamp */
+	int			rq_ntrans;
+
+#if defined(CONFIG_SUNRPC_BACKCHANNEL)
+	struct list_head	rq_bc_list;	/* Callback service list */
+	unsigned long		rq_bc_pa_state;	/* Backchannel prealloc state */
+	struct list_head	rq_bc_pa_list;	/* Backchannel prealloc list */
+#endif /* CONFIG_SUNRPC_BACKCHANEL */
+};
+#define rq_svec			rq_snd_buf.head
+#define rq_slen			rq_snd_buf.len
+
+struct rpc_xprt_ops {
+	void		(*set_buffer_size)(struct rpc_xprt *xprt, size_t sndsize, size_t rcvsize);
+	int		(*reserve_xprt)(struct rpc_xprt *xprt, struct rpc_task *task);
+	void		(*release_xprt)(struct rpc_xprt *xprt, struct rpc_task *task);
+	void		(*rpcbind)(struct rpc_task *task);
+	void		(*set_port)(struct rpc_xprt *xprt, unsigned short port);
+	void		(*connect)(struct rpc_task *task);
+	void *		(*buf_alloc)(struct rpc_task *task, size_t size);
+	void		(*buf_free)(void *buffer);
+	int		(*send_request)(struct rpc_task *task);
+	void		(*set_retrans_timeout)(struct rpc_task *task);
+	void		(*timer)(struct rpc_task *task);
+	void		(*release_request)(struct rpc_task *task);
+	void		(*close)(struct rpc_xprt *xprt);
+	void		(*destroy)(struct rpc_xprt *xprt);
+	void		(*print_stats)(struct rpc_xprt *xprt, struct seq_file *seq);
+};
+
+/*
+ * RPC transport identifiers
+ *
+ * To preserve compatibility with the historical use of raw IP protocol
+ * id's for transport selection, UDP and TCP identifiers are specified
+ * with the previous values. No such restriction exists for new transports,
+ * except that they may not collide with these values (17 and 6,
+ * respectively).
+ */
+#define XPRT_TRANSPORT_BC       (1 << 31)
+enum xprt_transports {
+	XPRT_TRANSPORT_UDP	= IPPROTO_UDP,
+	XPRT_TRANSPORT_TCP	= IPPROTO_TCP,
+	XPRT_TRANSPORT_BC_TCP	= IPPROTO_TCP | XPRT_TRANSPORT_BC,
+	XPRT_TRANSPORT_RDMA	= 256,
+	XPRT_TRANSPORT_LOCAL	= 257,
+};
+
+struct rpc_xprt {
+	atomic_t		count;		/* Reference count */
+	struct rpc_xprt_ops *	ops;		/* transport methods */
+
+	const struct rpc_timeout *timeout;	/* timeout parms */
+	struct sockaddr_storage	addr;		/* server address */
+	size_t			addrlen;	/* size of server address */
+	int			prot;		/* IP protocol */
+
+	unsigned long		cong;		/* current congestion */
+	unsigned long		cwnd;		/* congestion window */
+
+	size_t			max_payload;	/* largest RPC payload size,
+						   in bytes */
+	unsigned int		tsh_size;	/* size of transport specific
+						   header */
+
+	struct rpc_wait_queue	binding;	/* requests waiting on rpcbind */
+	struct rpc_wait_queue	sending;	/* requests waiting to send */
+	struct rpc_wait_queue	pending;	/* requests in flight */
+	struct rpc_wait_queue	backlog;	/* waiting for slot */
+	struct list_head	free;		/* free slots */
+	unsigned int		max_reqs;	/* max number of slots */
+	unsigned int		min_reqs;	/* min number of slots */
+	atomic_t		num_reqs;	/* total slots */
+	unsigned long		state;		/* transport state */
+	unsigned char		shutdown   : 1,	/* being shut down */
+				resvport   : 1; /* use a reserved port */
+	unsigned int		bind_index;	/* bind function index */
+
+	/*
+	 * Connection of transports
+	 */
+	unsigned long		bind_timeout,
+				reestablish_timeout;
+	unsigned int		connect_cookie;	/* A cookie that gets bumped
+						   every time the transport
+						   is reconnected */
+
+	/*
+	 * Disconnection of idle transports
+	 */
+	struct work_struct	task_cleanup;
+	struct timer_list	timer;
+	unsigned long		last_used,
+				idle_timeout;
+
+	/*
+	 * Send stuff
+	 */
+	spinlock_t		transport_lock;	/* lock transport info */
+	spinlock_t		reserve_lock;	/* lock slot table */
+	u32			xid;		/* Next XID value to use */
+	struct rpc_task *	snd_task;	/* Task blocked in send */
+	struct svc_xprt		*bc_xprt;	/* NFSv4.1 backchannel */
+#if defined(CONFIG_SUNRPC_BACKCHANNEL)
+	struct svc_serv		*bc_serv;       /* The RPC service which will */
+						/* process the callback */
+	unsigned int		bc_alloc_count;	/* Total number of preallocs */
+	spinlock_t		bc_pa_lock;	/* Protects the preallocated
+						 * items */
+	struct list_head	bc_pa_list;	/* List of preallocated
+						 * backchannel rpc_rqst's */
+#endif /* CONFIG_SUNRPC_BACKCHANNEL */
+	struct list_head	recv;
+
+	struct {
+		unsigned long		bind_count,	/* total number of binds */
+					connect_count,	/* total number of connects */
+					connect_start,	/* connect start timestamp */
+					connect_time,	/* jiffies waiting for connect */
+					sends,		/* how many complete requests */
+					recvs,		/* how many complete requests */
+					bad_xids,	/* lookup_rqst didn't find XID */
+					max_slots;	/* max rpc_slots used */
+
+		unsigned long long	req_u,		/* average requests on the wire */
+					bklog_u,	/* backlog queue utilization */
+					sending_u,	/* send q utilization */
+					pending_u;	/* pend q utilization */
+	} stat;
+
+	struct net		*xprt_net;
+	const char		*servername;
+	const char		*address_strings[RPC_DISPLAY_MAX];
+};
+
+#if defined(CONFIG_SUNRPC_BACKCHANNEL)
+/*
+ * Backchannel flags
+ */
+#define	RPC_BC_PA_IN_USE	0x0001		/* Preallocated backchannel */
+						/* buffer in use */
+#endif /* CONFIG_SUNRPC_BACKCHANNEL */
+
+#if defined(CONFIG_SUNRPC_BACKCHANNEL)
+static inline int bc_prealloc(struct rpc_rqst *req)
+{
+	return test_bit(RPC_BC_PA_IN_USE, &req->rq_bc_pa_state);
+}
+#else
+static inline int bc_prealloc(struct rpc_rqst *req)
+{
+	return 0;
+}
+#endif /* CONFIG_SUNRPC_BACKCHANNEL */
+
+struct xprt_create {
+	int			ident;		/* XPRT_TRANSPORT identifier */
+	struct net *		net;
+	struct sockaddr *	srcaddr;	/* optional local address */
+	struct sockaddr *	dstaddr;	/* remote peer address */
+	size_t			addrlen;
+	const char		*servername;
+	struct svc_xprt		*bc_xprt;	/* NFSv4.1 backchannel */
+};
+
+struct xprt_class {
+	struct list_head	list;
+	int			ident;		/* XPRT_TRANSPORT identifier */
+	struct rpc_xprt *	(*setup)(struct xprt_create *);
+	struct module		*owner;
+	char			name[32];
+};
+
+/*
+ * Generic internal transport functions
+ */
+struct rpc_xprt		*xprt_create_transport(struct xprt_create *args);
+void			xprt_connect(struct rpc_task *task);
+void			xprt_reserve(struct rpc_task *task);
+int			xprt_reserve_xprt(struct rpc_xprt *xprt, struct rpc_task *task);
+int			xprt_reserve_xprt_cong(struct rpc_xprt *xprt, struct rpc_task *task);
+int			xprt_prepare_transmit(struct rpc_task *task);
+void			xprt_transmit(struct rpc_task *task);
+void			xprt_end_transmit(struct rpc_task *task);
+int			xprt_adjust_timeout(struct rpc_rqst *req);
+void			xprt_release_xprt(struct rpc_xprt *xprt, struct rpc_task *task);
+void			xprt_release_xprt_cong(struct rpc_xprt *xprt, struct rpc_task *task);
+void			xprt_release(struct rpc_task *task);
+struct rpc_xprt *	xprt_get(struct rpc_xprt *xprt);
+void			xprt_put(struct rpc_xprt *xprt);
+struct rpc_xprt *	xprt_alloc(struct net *net, size_t size,
+				unsigned int num_prealloc,
+				unsigned int max_req);
+void			xprt_free(struct rpc_xprt *);
+
+static inline __be32 *xprt_skip_transport_header(struct rpc_xprt *xprt, __be32 *p)
+{
+	return p + xprt->tsh_size;
+}
+
+/*
+ * Transport switch helper functions
+ */
+int			xprt_register_transport(struct xprt_class *type);
+int			xprt_unregister_transport(struct xprt_class *type);
+int			xprt_load_transport(const char *);
+void			xprt_set_retrans_timeout_def(struct rpc_task *task);
+void			xprt_set_retrans_timeout_rtt(struct rpc_task *task);
+void			xprt_wake_pending_tasks(struct rpc_xprt *xprt, int status);
+void			xprt_wait_for_buffer_space(struct rpc_task *task, rpc_action action);
+void			xprt_write_space(struct rpc_xprt *xprt);
+void			xprt_adjust_cwnd(struct rpc_task *task, int result);
+struct rpc_rqst *	xprt_lookup_rqst(struct rpc_xprt *xprt, __be32 xid);
+void			xprt_complete_rqst(struct rpc_task *task, int copied);
+void			xprt_release_rqst_cong(struct rpc_task *task);
+void			xprt_disconnect_done(struct rpc_xprt *xprt);
+void			xprt_force_disconnect(struct rpc_xprt *xprt);
+void			xprt_conditional_disconnect(struct rpc_xprt *xprt, unsigned int cookie);
+
+/*
+ * Reserved bit positions in xprt->state
+ */
+#define XPRT_LOCKED		(0)
+#define XPRT_CONNECTED		(1)
+#define XPRT_CONNECTING		(2)
+#define XPRT_CLOSE_WAIT		(3)
+#define XPRT_BOUND		(4)
+#define XPRT_BINDING		(5)
+#define XPRT_CLOSING		(6)
+#define XPRT_CONNECTION_ABORT	(7)
+#define XPRT_CONNECTION_CLOSE	(8)
+
+static inline void xprt_set_connected(struct rpc_xprt *xprt)
+{
+	set_bit(XPRT_CONNECTED, &xprt->state);
+}
+
+static inline void xprt_clear_connected(struct rpc_xprt *xprt)
+{
+	clear_bit(XPRT_CONNECTED, &xprt->state);
+}
+
+static inline int xprt_connected(struct rpc_xprt *xprt)
+{
+	return test_bit(XPRT_CONNECTED, &xprt->state);
+}
+
+static inline int xprt_test_and_set_connected(struct rpc_xprt *xprt)
+{
+	return test_and_set_bit(XPRT_CONNECTED, &xprt->state);
+}
+
+static inline int xprt_test_and_clear_connected(struct rpc_xprt *xprt)
+{
+	return test_and_clear_bit(XPRT_CONNECTED, &xprt->state);
+}
+
+static inline void xprt_clear_connecting(struct rpc_xprt *xprt)
+{
+	smp_mb__before_clear_bit();
+	clear_bit(XPRT_CONNECTING, &xprt->state);
+	smp_mb__after_clear_bit();
+}
+
+static inline int xprt_connecting(struct rpc_xprt *xprt)
+{
+	return test_bit(XPRT_CONNECTING, &xprt->state);
+}
+
+static inline int xprt_test_and_set_connecting(struct rpc_xprt *xprt)
+{
+	return test_and_set_bit(XPRT_CONNECTING, &xprt->state);
+}
+
+static inline void xprt_set_bound(struct rpc_xprt *xprt)
+{
+	test_and_set_bit(XPRT_BOUND, &xprt->state);
+}
+
+static inline int xprt_bound(struct rpc_xprt *xprt)
+{
+	return test_bit(XPRT_BOUND, &xprt->state);
+}
+
+static inline void xprt_clear_bound(struct rpc_xprt *xprt)
+{
+	clear_bit(XPRT_BOUND, &xprt->state);
+}
+
+static inline void xprt_clear_binding(struct rpc_xprt *xprt)
+{
+	smp_mb__before_clear_bit();
+	clear_bit(XPRT_BINDING, &xprt->state);
+	smp_mb__after_clear_bit();
+}
+
+static inline int xprt_test_and_set_binding(struct rpc_xprt *xprt)
+{
+	return test_and_set_bit(XPRT_BINDING, &xprt->state);
+}
+
+#endif /* __KERNEL__*/
+
+#endif /* _LINUX_SUNRPC_XPRT_H */
diff --git a/include/linux/sunrpc/xprtrdma.h b/include/linux/sunrpc/xprtrdma.h
new file mode 100644
index 00000000..c2f04e1a
--- /dev/null
+++ b/include/linux/sunrpc/xprtrdma.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright (c) 2003-2007 Network Appliance, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the BSD-type
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *      Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *
+ *      Redistributions in binary form must reproduce the above
+ *      copyright notice, this list of conditions and the following
+ *      disclaimer in the documentation and/or other materials provided
+ *      with the distribution.
+ *
+ *      Neither the name of the Network Appliance, Inc. nor the names of
+ *      its contributors may be used to endorse or promote products
+ *      derived from this software without specific prior written
+ *      permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _LINUX_SUNRPC_XPRTRDMA_H
+#define _LINUX_SUNRPC_XPRTRDMA_H
+
+/*
+ * rpcbind (v3+) RDMA netid.
+ */
+#define RPCBIND_NETID_RDMA	"rdma"
+
+/*
+ * Constants. Max RPC/NFS header is big enough to account for
+ * additional marshaling buffers passed down by Linux client.
+ *
+ * RDMA header is currently fixed max size, and is big enough for a
+ * fully-chunked NFS message (read chunks are the largest). Note only
+ * a single chunk type per message is supported currently.
+ */
+#define RPCRDMA_MIN_SLOT_TABLE	(2U)
+#define RPCRDMA_DEF_SLOT_TABLE	(32U)
+#define RPCRDMA_MAX_SLOT_TABLE	(256U)
+
+#define RPCRDMA_DEF_INLINE  (1024)	/* default inline max */
+
+#define RPCRDMA_INLINE_PAD_THRESH  (512)/* payload threshold to pad (bytes) */
+
+/* memory registration strategies */
+#define RPCRDMA_PERSISTENT_REGISTRATION (1)
+
+enum rpcrdma_memreg {
+	RPCRDMA_BOUNCEBUFFERS = 0,
+	RPCRDMA_REGISTER,
+	RPCRDMA_MEMWINDOWS,
+	RPCRDMA_MEMWINDOWS_ASYNC,
+	RPCRDMA_MTHCAFMR,
+	RPCRDMA_FRMR,
+	RPCRDMA_ALLPHYSICAL,
+	RPCRDMA_LAST
+};
+
+#endif /* _LINUX_SUNRPC_XPRTRDMA_H */
diff --git a/include/linux/sunrpc/xprtsock.h b/include/linux/sunrpc/xprtsock.h
new file mode 100644
index 00000000..1ad36cc2
--- /dev/null
+++ b/include/linux/sunrpc/xprtsock.h
@@ -0,0 +1,22 @@
+/*
+ *  linux/include/linux/sunrpc/xprtsock.h
+ *
+ *  Declarations for the RPC transport socket provider.
+ */
+
+#ifndef _LINUX_SUNRPC_XPRTSOCK_H
+#define _LINUX_SUNRPC_XPRTSOCK_H
+
+#ifdef __KERNEL__
+
+int		init_socket_xprt(void);
+void		cleanup_socket_xprt(void);
+
+#define RPC_MIN_RESVPORT	(1U)
+#define RPC_MAX_RESVPORT	(65535U)
+#define RPC_DEF_MIN_RESVPORT	(665U)
+#define RPC_DEF_MAX_RESVPORT	(1023U)
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_SUNRPC_XPRTSOCK_H */
diff --git a/include/linux/sunserialcore.h b/include/linux/sunserialcore.h
new file mode 100644
index 00000000..68e7430b
--- /dev/null
+++ b/include/linux/sunserialcore.h
@@ -0,0 +1,33 @@
+/* sunserialcore.h
+ *
+ * Generic SUN serial/kbd/ms layer.  Based entirely
+ * upon drivers/sbus/char/sunserial.h which is:
+ *
+ * Copyright (C) 1997  Eddie C. Dost  (ecd@skynet.be)
+ *
+ * Port to new UART layer is:
+ *
+ * Copyright (C) 2002 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef _SERIAL_SUN_H
+#define _SERIAL_SUN_H
+
+/* Serial keyboard defines for L1-A processing... */
+#define SUNKBD_RESET		0xff
+#define SUNKBD_L1		0x01
+#define SUNKBD_UP		0x80
+#define SUNKBD_A		0x4d
+
+extern unsigned int suncore_mouse_baud_cflag_next(unsigned int, int *);
+extern int suncore_mouse_baud_detection(unsigned char, int);
+
+extern int sunserial_register_minors(struct uart_driver *, int);
+extern void sunserial_unregister_minors(struct uart_driver *, int);
+
+extern int sunserial_console_match(struct console *, struct device_node *,
+				   struct uart_driver *, int, bool);
+extern void sunserial_console_termios(struct console *,
+				      struct device_node *);
+
+#endif /* !(_SERIAL_SUN_H) */
diff --git a/include/linux/superhyway.h b/include/linux/superhyway.h
new file mode 100644
index 00000000..17ea468f
--- /dev/null
+++ b/include/linux/superhyway.h
@@ -0,0 +1,107 @@
+/*
+ * include/linux/superhyway.h
+ *
+ * SuperHyway Bus definitions
+ *
+ * Copyright (C) 2004, 2005  Paul Mundt <lethal@linux-sh.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __LINUX_SUPERHYWAY_H
+#define __LINUX_SUPERHYWAY_H
+
+#include <linux/device.h>
+
+/*
+ * SuperHyway IDs
+ */
+#define SUPERHYWAY_DEVICE_ID_SH5_DMAC	0x0183
+
+struct superhyway_vcr_info {
+	u8	perr_flags;	/* P-port Error flags */
+	u8	merr_flags;	/* Module Error flags */
+	u16	mod_vers;	/* Module Version */
+	u16	mod_id;		/* Module ID */
+	u8	bot_mb;		/* Bottom Memory block */
+	u8	top_mb;		/* Top Memory block */
+};
+
+struct superhyway_ops {
+	int (*read_vcr)(unsigned long base, struct superhyway_vcr_info *vcr);
+	int (*write_vcr)(unsigned long base, struct superhyway_vcr_info vcr);
+};
+
+struct superhyway_bus {
+	struct superhyway_ops *ops;
+};
+
+extern struct superhyway_bus superhyway_channels[];
+
+struct superhyway_device_id {
+	unsigned int id;
+	unsigned long driver_data;
+};
+
+struct superhyway_device;
+extern struct bus_type superhyway_bus_type;
+
+struct superhyway_driver {
+	char *name;
+
+	const struct superhyway_device_id *id_table;
+	struct device_driver drv;
+
+	int (*probe)(struct superhyway_device *dev, const struct superhyway_device_id *id);
+	void (*remove)(struct superhyway_device *dev);
+};
+
+#define to_superhyway_driver(d)	container_of((d), struct superhyway_driver, drv)
+
+struct superhyway_device {
+	char name[32];
+
+	struct device dev;
+
+	struct superhyway_device_id id;
+	struct superhyway_driver *drv;
+	struct superhyway_bus *bus;
+
+	int num_resources;
+	struct resource *resource;
+	struct superhyway_vcr_info vcr;
+};
+
+#define to_superhyway_device(d)	container_of((d), struct superhyway_device, dev)
+
+#define superhyway_get_drvdata(d)	dev_get_drvdata(&(d)->dev)
+#define superhyway_set_drvdata(d,p)	dev_set_drvdata(&(d)->dev, (p))
+
+static inline int
+superhyway_read_vcr(struct superhyway_device *dev, unsigned long base,
+		    struct superhyway_vcr_info *vcr)
+{
+	return dev->bus->ops->read_vcr(base, vcr);
+}
+
+static inline int
+superhyway_write_vcr(struct superhyway_device *dev, unsigned long base,
+		     struct superhyway_vcr_info vcr)
+{
+	return dev->bus->ops->write_vcr(base, vcr);
+}
+
+extern int superhyway_scan_bus(struct superhyway_bus *);
+
+/* drivers/sh/superhyway/superhyway.c */
+int superhyway_register_driver(struct superhyway_driver *);
+void superhyway_unregister_driver(struct superhyway_driver *);
+int superhyway_add_device(unsigned long base, struct superhyway_device *, struct superhyway_bus *);
+int superhyway_add_devices(struct superhyway_bus *bus, struct superhyway_device **devices, int nr_devices);
+
+/* drivers/sh/superhyway/superhyway-sysfs.c */
+extern struct device_attribute superhyway_dev_attrs[];
+
+#endif /* __LINUX_SUPERHYWAY_H */
+
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
new file mode 100644
index 00000000..a79a28f5
--- /dev/null
+++ b/include/linux/suspend.h
@@ -0,0 +1,456 @@
+#ifndef _LINUX_SUSPEND_H
+#define _LINUX_SUSPEND_H
+
+#include <linux/swap.h>
+#include <linux/notifier.h>
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/mm.h>
+#include <linux/freezer.h>
+#include <asm/errno.h>
+
+#ifdef CONFIG_VT
+extern void pm_set_vt_switch(int);
+#else
+static inline void pm_set_vt_switch(int do_switch)
+{
+}
+#endif
+
+#ifdef CONFIG_VT_CONSOLE_SLEEP
+extern int pm_prepare_console(void);
+extern void pm_restore_console(void);
+#else
+static inline int pm_prepare_console(void)
+{
+	return 0;
+}
+
+static inline void pm_restore_console(void)
+{
+}
+#endif
+
+typedef int __bitwise suspend_state_t;
+
+#define PM_SUSPEND_ON		((__force suspend_state_t) 0)
+#define PM_SUSPEND_STANDBY	((__force suspend_state_t) 1)
+#define PM_SUSPEND_MEM		((__force suspend_state_t) 3)
+#define PM_SUSPEND_MAX		((__force suspend_state_t) 4)
+
+enum suspend_stat_step {
+	SUSPEND_FREEZE = 1,
+	SUSPEND_PREPARE,
+	SUSPEND_SUSPEND,
+	SUSPEND_SUSPEND_LATE,
+	SUSPEND_SUSPEND_NOIRQ,
+	SUSPEND_RESUME_NOIRQ,
+	SUSPEND_RESUME_EARLY,
+	SUSPEND_RESUME
+};
+
+struct suspend_stats {
+	int	success;
+	int	fail;
+	int	failed_freeze;
+	int	failed_prepare;
+	int	failed_suspend;
+	int	failed_suspend_late;
+	int	failed_suspend_noirq;
+	int	failed_resume;
+	int	failed_resume_early;
+	int	failed_resume_noirq;
+#define	REC_FAILED_NUM	2
+	int	last_failed_dev;
+	char	failed_devs[REC_FAILED_NUM][40];
+	int	last_failed_errno;
+	int	errno[REC_FAILED_NUM];
+	int	last_failed_step;
+	enum suspend_stat_step	failed_steps[REC_FAILED_NUM];
+};
+
+extern struct suspend_stats suspend_stats;
+
+static inline void dpm_save_failed_dev(const char *name)
+{
+	strlcpy(suspend_stats.failed_devs[suspend_stats.last_failed_dev],
+		name,
+		sizeof(suspend_stats.failed_devs[0]));
+	suspend_stats.last_failed_dev++;
+	suspend_stats.last_failed_dev %= REC_FAILED_NUM;
+}
+
+static inline void dpm_save_failed_errno(int err)
+{
+	suspend_stats.errno[suspend_stats.last_failed_errno] = err;
+	suspend_stats.last_failed_errno++;
+	suspend_stats.last_failed_errno %= REC_FAILED_NUM;
+}
+
+static inline void dpm_save_failed_step(enum suspend_stat_step step)
+{
+	suspend_stats.failed_steps[suspend_stats.last_failed_step] = step;
+	suspend_stats.last_failed_step++;
+	suspend_stats.last_failed_step %= REC_FAILED_NUM;
+}
+
+/**
+ * struct platform_suspend_ops - Callbacks for managing platform dependent
+ *	system sleep states.
+ *
+ * @valid: Callback to determine if given system sleep state is supported by
+ *	the platform.
+ *	Valid (ie. supported) states are advertised in /sys/power/state.  Note
+ *	that it still may be impossible to enter given system sleep state if the
+ *	conditions aren't right.
+ *	There is the %suspend_valid_only_mem function available that can be
+ *	assigned to this if the platform only supports mem sleep.
+ *
+ * @begin: Initialise a transition to given system sleep state.
+ *	@begin() is executed right prior to suspending devices.  The information
+ *	conveyed to the platform code by @begin() should be disregarded by it as
+ *	soon as @end() is executed.  If @begin() fails (ie. returns nonzero),
+ *	@prepare(), @enter() and @finish() will not be called by the PM core.
+ *	This callback is optional.  However, if it is implemented, the argument
+ *	passed to @enter() is redundant and should be ignored.
+ *
+ * @prepare: Prepare the platform for entering the system sleep state indicated
+ *	by @begin().
+ *	@prepare() is called right after devices have been suspended (ie. the
+ *	appropriate .suspend() method has been executed for each device) and
+ *	before device drivers' late suspend callbacks are executed.  It returns
+ *	0 on success or a negative error code otherwise, in which case the
+ *	system cannot enter the desired sleep state (@prepare_late(), @enter(),
+ *	and @wake() will not be called in that case).
+ *
+ * @prepare_late: Finish preparing the platform for entering the system sleep
+ *	state indicated by @begin().
+ *	@prepare_late is called before disabling nonboot CPUs and after
+ *	device drivers' late suspend callbacks have been executed.  It returns
+ *	0 on success or a negative error code otherwise, in which case the
+ *	system cannot enter the desired sleep state (@enter() will not be
+ *	executed).
+ *
+ * @enter: Enter the system sleep state indicated by @begin() or represented by
+ *	the argument if @begin() is not implemented.
+ *	This callback is mandatory.  It returns 0 on success or a negative
+ *	error code otherwise, in which case the system cannot enter the desired
+ *	sleep state.
+ *
+ * @wake: Called when the system has just left a sleep state, right after
+ *	the nonboot CPUs have been enabled and before device drivers' early
+ *	resume callbacks are executed.
+ *	This callback is optional, but should be implemented by the platforms
+ *	that implement @prepare_late().  If implemented, it is always called
+ *	after @prepare_late and @enter(), even if one of them fails.
+ *
+ * @finish: Finish wake-up of the platform.
+ *	@finish is called right prior to calling device drivers' regular suspend
+ *	callbacks.
+ *	This callback is optional, but should be implemented by the platforms
+ *	that implement @prepare().  If implemented, it is always called after
+ *	@enter() and @wake(), even if any of them fails.  It is executed after
+ *	a failing @prepare.
+ *
+ * @suspend_again: Returns whether the system should suspend again (true) or
+ *	not (false). If the platform wants to poll sensors or execute some
+ *	code during suspended without invoking userspace and most of devices,
+ *	suspend_again callback is the place assuming that periodic-wakeup or
+ *	alarm-wakeup is already setup. This allows to execute some codes while
+ *	being kept suspended in the view of userland and devices.
+ *
+ * @end: Called by the PM core right after resuming devices, to indicate to
+ *	the platform that the system has returned to the working state or
+ *	the transition to the sleep state has been aborted.
+ *	This callback is optional, but should be implemented by the platforms
+ *	that implement @begin().  Accordingly, platforms implementing @begin()
+ *	should also provide a @end() which cleans up transitions aborted before
+ *	@enter().
+ *
+ * @recover: Recover the platform from a suspend failure.
+ *	Called by the PM core if the suspending of devices fails.
+ *	This callback is optional and should only be implemented by platforms
+ *	which require special recovery actions in that situation.
+ */
+struct platform_suspend_ops {
+	int (*valid)(suspend_state_t state);
+	int (*begin)(suspend_state_t state);
+	int (*prepare)(void);
+	int (*prepare_late)(void);
+	int (*enter)(suspend_state_t state);
+	void (*wake)(void);
+	void (*finish)(void);
+	bool (*suspend_again)(void);
+	void (*end)(void);
+	void (*recover)(void);
+};
+
+#ifdef CONFIG_SUSPEND
+/**
+ * suspend_set_ops - set platform dependent suspend operations
+ * @ops: The new suspend operations to set.
+ */
+extern void suspend_set_ops(const struct platform_suspend_ops *ops);
+extern int suspend_valid_only_mem(suspend_state_t state);
+
+/**
+ * arch_suspend_disable_irqs - disable IRQs for suspend
+ *
+ * Disables IRQs (in the default case). This is a weak symbol in the common
+ * code and thus allows architectures to override it if more needs to be
+ * done. Not called for suspend to disk.
+ */
+extern void arch_suspend_disable_irqs(void);
+
+/**
+ * arch_suspend_enable_irqs - enable IRQs after suspend
+ *
+ * Enables IRQs (in the default case). This is a weak symbol in the common
+ * code and thus allows architectures to override it if more needs to be
+ * done. Not called for suspend to disk.
+ */
+extern void arch_suspend_enable_irqs(void);
+
+extern int pm_suspend(suspend_state_t state);
+#else /* !CONFIG_SUSPEND */
+#define suspend_valid_only_mem	NULL
+
+static inline void suspend_set_ops(const struct platform_suspend_ops *ops) {}
+static inline int pm_suspend(suspend_state_t state) { return -ENOSYS; }
+#endif /* !CONFIG_SUSPEND */
+
+/* struct pbe is used for creating lists of pages that should be restored
+ * atomically during the resume from disk, because the page frames they have
+ * occupied before the suspend are in use.
+ */
+struct pbe {
+	void *address;		/* address of the copy */
+	void *orig_address;	/* original address of a page */
+	struct pbe *next;
+};
+
+/* mm/page_alloc.c */
+extern void mark_free_pages(struct zone *zone);
+
+/**
+ * struct platform_hibernation_ops - hibernation platform support
+ *
+ * The methods in this structure allow a platform to carry out special
+ * operations required by it during a hibernation transition.
+ *
+ * All the methods below, except for @recover(), must be implemented.
+ *
+ * @begin: Tell the platform driver that we're starting hibernation.
+ *	Called right after shrinking memory and before freezing devices.
+ *
+ * @end: Called by the PM core right after resuming devices, to indicate to
+ *	the platform that the system has returned to the working state.
+ *
+ * @pre_snapshot: Prepare the platform for creating the hibernation image.
+ *	Called right after devices have been frozen and before the nonboot
+ *	CPUs are disabled (runs with IRQs on).
+ *
+ * @finish: Restore the previous state of the platform after the hibernation
+ *	image has been created *or* put the platform into the normal operation
+ *	mode after the hibernation (the same method is executed in both cases).
+ *	Called right after the nonboot CPUs have been enabled and before
+ *	thawing devices (runs with IRQs on).
+ *
+ * @prepare: Prepare the platform for entering the low power state.
+ *	Called right after the hibernation image has been saved and before
+ *	devices are prepared for entering the low power state.
+ *
+ * @enter: Put the system into the low power state after the hibernation image
+ *	has been saved to disk.
+ *	Called after the nonboot CPUs have been disabled and all of the low
+ *	level devices have been shut down (runs with IRQs off).
+ *
+ * @leave: Perform the first stage of the cleanup after the system sleep state
+ *	indicated by @set_target() has been left.
+ *	Called right after the control has been passed from the boot kernel to
+ *	the image kernel, before the nonboot CPUs are enabled and before devices
+ *	are resumed.  Executed with interrupts disabled.
+ *
+ * @pre_restore: Prepare system for the restoration from a hibernation image.
+ *	Called right after devices have been frozen and before the nonboot
+ *	CPUs are disabled (runs with IRQs on).
+ *
+ * @restore_cleanup: Clean up after a failing image restoration.
+ *	Called right after the nonboot CPUs have been enabled and before
+ *	thawing devices (runs with IRQs on).
+ *
+ * @recover: Recover the platform from a failure to suspend devices.
+ *	Called by the PM core if the suspending of devices during hibernation
+ *	fails.  This callback is optional and should only be implemented by
+ *	platforms which require special recovery actions in that situation.
+ */
+struct platform_hibernation_ops {
+	int (*begin)(void);
+	void (*end)(void);
+	int (*pre_snapshot)(void);
+	void (*finish)(void);
+	int (*prepare)(void);
+	int (*enter)(void);
+	void (*leave)(void);
+	int (*pre_restore)(void);
+	void (*restore_cleanup)(void);
+	void (*recover)(void);
+};
+
+#ifdef CONFIG_HIBERNATION
+/* kernel/power/snapshot.c */
+extern void __register_nosave_region(unsigned long b, unsigned long e, int km);
+static inline void __init register_nosave_region(unsigned long b, unsigned long e)
+{
+	__register_nosave_region(b, e, 0);
+}
+static inline void __init register_nosave_region_late(unsigned long b, unsigned long e)
+{
+	__register_nosave_region(b, e, 1);
+}
+extern int swsusp_page_is_forbidden(struct page *);
+extern void swsusp_set_page_free(struct page *);
+extern void swsusp_unset_page_free(struct page *);
+extern unsigned long get_safe_page(gfp_t gfp_mask);
+
+extern void hibernation_set_ops(const struct platform_hibernation_ops *ops);
+extern int hibernate(void);
+extern bool system_entering_hibernation(void);
+#else /* CONFIG_HIBERNATION */
+static inline void register_nosave_region(unsigned long b, unsigned long e) {}
+static inline void register_nosave_region_late(unsigned long b, unsigned long e) {}
+static inline int swsusp_page_is_forbidden(struct page *p) { return 0; }
+static inline void swsusp_set_page_free(struct page *p) {}
+static inline void swsusp_unset_page_free(struct page *p) {}
+
+static inline void hibernation_set_ops(const struct platform_hibernation_ops *ops) {}
+static inline int hibernate(void) { return -ENOSYS; }
+static inline bool system_entering_hibernation(void) { return false; }
+#endif /* CONFIG_HIBERNATION */
+
+/* Hibernation and suspend events */
+#define PM_HIBERNATION_PREPARE	0x0001 /* Going to hibernate */
+#define PM_POST_HIBERNATION	0x0002 /* Hibernation finished */
+#define PM_SUSPEND_PREPARE	0x0003 /* Going to suspend the system */
+#define PM_POST_SUSPEND		0x0004 /* Suspend finished */
+#define PM_RESTORE_PREPARE	0x0005 /* Going to restore a saved image */
+#define PM_POST_RESTORE		0x0006 /* Restore failed */
+#define PM_HIBERNATION_FINISH       0x0007
+extern struct mutex pm_mutex;
+
+#ifdef CONFIG_PM_SLEEP
+void save_processor_state(void);
+void restore_processor_state(void);
+
+/* kernel/power/main.c */
+extern int register_pm_notifier(struct notifier_block *nb);
+extern int unregister_pm_notifier(struct notifier_block *nb);
+
+#define pm_notifier(fn, pri) {				\
+	static struct notifier_block fn##_nb =			\
+		{ .notifier_call = fn, .priority = pri };	\
+	register_pm_notifier(&fn##_nb);			\
+}
+
+/* drivers/base/power/wakeup.c */
+extern bool events_check_enabled;
+
+extern bool pm_wakeup_pending(void);
+extern bool pm_get_wakeup_count(unsigned int *count, bool block);
+extern bool pm_save_wakeup_count(unsigned int count);
+extern void pm_wakep_autosleep_enabled(bool set);
+
+static inline void lock_system_sleep(void)
+{
+	current->flags |= PF_FREEZER_SKIP;
+	mutex_lock(&pm_mutex);
+}
+
+static inline void unlock_system_sleep(void)
+{
+	/*
+	 * Don't use freezer_count() because we don't want the call to
+	 * try_to_freeze() here.
+	 *
+	 * Reason:
+	 * Fundamentally, we just don't need it, because freezing condition
+	 * doesn't come into effect until we release the pm_mutex lock,
+	 * since the freezer always works with pm_mutex held.
+	 *
+	 * More importantly, in the case of hibernation,
+	 * unlock_system_sleep() gets called in snapshot_read() and
+	 * snapshot_write() when the freezing condition is still in effect.
+	 * Which means, if we use try_to_freeze() here, it would make them
+	 * enter the refrigerator, thus causing hibernation to lockup.
+	 */
+	current->flags &= ~PF_FREEZER_SKIP;
+	mutex_unlock(&pm_mutex);
+}
+
+#else /* !CONFIG_PM_SLEEP */
+
+static inline int register_pm_notifier(struct notifier_block *nb)
+{
+	return 0;
+}
+
+static inline int unregister_pm_notifier(struct notifier_block *nb)
+{
+	return 0;
+}
+
+#define pm_notifier(fn, pri)	do { (void)(fn); } while (0)
+
+static inline bool pm_wakeup_pending(void) { return false; }
+
+static inline void lock_system_sleep(void) {}
+static inline void unlock_system_sleep(void) {}
+
+#endif /* !CONFIG_PM_SLEEP */
+
+#ifdef CONFIG_PM_AUTOSLEEP
+
+/* kernel/power/autosleep.c */
+void queue_up_suspend_work(void);
+
+#else /* !CONFIG_PM_AUTOSLEEP */
+
+static inline void queue_up_suspend_work(void) {}
+
+#endif /* !CONFIG_PM_AUTOSLEEP */
+
+#ifdef CONFIG_ARCH_SAVE_PAGE_KEYS
+/*
+ * The ARCH_SAVE_PAGE_KEYS functions can be used by an architecture
+ * to save/restore additional information to/from the array of page
+ * frame numbers in the hibernation image. For s390 this is used to
+ * save and restore the storage key for each page that is included
+ * in the hibernation image.
+ */
+unsigned long page_key_additional_pages(unsigned long pages);
+int page_key_alloc(unsigned long pages);
+void page_key_free(void);
+void page_key_read(unsigned long *pfn);
+void page_key_memorize(unsigned long *pfn);
+void page_key_write(void *address);
+
+#else /* !CONFIG_ARCH_SAVE_PAGE_KEYS */
+
+static inline unsigned long page_key_additional_pages(unsigned long pages)
+{
+	return 0;
+}
+
+static inline int  page_key_alloc(unsigned long pages)
+{
+	return 0;
+}
+
+static inline void page_key_free(void) {}
+static inline void page_key_read(unsigned long *pfn) {}
+static inline void page_key_memorize(unsigned long *pfn) {}
+static inline void page_key_write(void *address) {}
+
+#endif /* !CONFIG_ARCH_SAVE_PAGE_KEYS */
+
+#endif /* _LINUX_SUSPEND_H */
diff --git a/include/linux/suspend_ioctls.h b/include/linux/suspend_ioctls.h
new file mode 100644
index 00000000..0b303829
--- /dev/null
+++ b/include/linux/suspend_ioctls.h
@@ -0,0 +1,33 @@
+#ifndef _LINUX_SUSPEND_IOCTLS_H
+#define _LINUX_SUSPEND_IOCTLS_H
+
+#include <linux/types.h>
+/*
+ * This structure is used to pass the values needed for the identification
+ * of the resume swap area from a user space to the kernel via the
+ * SNAPSHOT_SET_SWAP_AREA ioctl
+ */
+struct resume_swap_area {
+	__kernel_loff_t offset;
+	__u32 dev;
+} __attribute__((packed));
+
+#define SNAPSHOT_IOC_MAGIC	'3'
+#define SNAPSHOT_FREEZE			_IO(SNAPSHOT_IOC_MAGIC, 1)
+#define SNAPSHOT_UNFREEZE		_IO(SNAPSHOT_IOC_MAGIC, 2)
+#define SNAPSHOT_ATOMIC_RESTORE		_IO(SNAPSHOT_IOC_MAGIC, 4)
+#define SNAPSHOT_FREE			_IO(SNAPSHOT_IOC_MAGIC, 5)
+#define SNAPSHOT_FREE_SWAP_PAGES	_IO(SNAPSHOT_IOC_MAGIC, 9)
+#define SNAPSHOT_S2RAM			_IO(SNAPSHOT_IOC_MAGIC, 11)
+#define SNAPSHOT_SET_SWAP_AREA		_IOW(SNAPSHOT_IOC_MAGIC, 13, \
+							struct resume_swap_area)
+#define SNAPSHOT_GET_IMAGE_SIZE		_IOR(SNAPSHOT_IOC_MAGIC, 14, __kernel_loff_t)
+#define SNAPSHOT_PLATFORM_SUPPORT	_IO(SNAPSHOT_IOC_MAGIC, 15)
+#define SNAPSHOT_POWER_OFF		_IO(SNAPSHOT_IOC_MAGIC, 16)
+#define SNAPSHOT_CREATE_IMAGE		_IOW(SNAPSHOT_IOC_MAGIC, 17, int)
+#define SNAPSHOT_PREF_IMAGE_SIZE	_IO(SNAPSHOT_IOC_MAGIC, 18)
+#define SNAPSHOT_AVAIL_SWAP_SIZE	_IOR(SNAPSHOT_IOC_MAGIC, 19, __kernel_loff_t)
+#define SNAPSHOT_ALLOC_SWAP_PAGE	_IOR(SNAPSHOT_IOC_MAGIC, 20, __kernel_loff_t)
+#define SNAPSHOT_IOC_MAXNR	20
+
+#endif /* _LINUX_SUSPEND_IOCTLS_H */
diff --git a/include/linux/svga.h b/include/linux/svga.h
new file mode 100644
index 00000000..bfa68e83
--- /dev/null
+++ b/include/linux/svga.h
@@ -0,0 +1,124 @@
+#ifndef _LINUX_SVGA_H
+#define _LINUX_SVGA_H
+
+#include <linux/pci.h>
+#include <video/vga.h>
+
+/* Terminator for register set */
+
+#define VGA_REGSET_END_VAL	0xFF
+#define VGA_REGSET_END		{VGA_REGSET_END_VAL, 0, 0}
+
+struct vga_regset {
+	u8 regnum;
+	u8 lowbit;
+	u8 highbit;
+};
+
+/* ------------------------------------------------------------------------- */
+
+#define SVGA_FORMAT_END_VAL	0xFFFF
+#define SVGA_FORMAT_END		{SVGA_FORMAT_END_VAL, {0, 0, 0}, {0, 0, 0}, {0, 0, 0}, {0, 0, 0}, 0, 0, 0, 0, 0, 0}
+
+struct svga_fb_format {
+	/* var part */
+	u32 bits_per_pixel;
+	struct fb_bitfield red;
+	struct fb_bitfield green;
+	struct fb_bitfield blue;
+	struct fb_bitfield transp;
+	u32 nonstd;
+	/* fix part */
+	u32 type;
+	u32 type_aux;
+	u32 visual;
+	u32 xpanstep;
+	u32 xresstep;
+};
+
+struct svga_timing_regs {
+	const struct vga_regset *h_total_regs;
+	const struct vga_regset *h_display_regs;
+	const struct vga_regset *h_blank_start_regs;
+	const struct vga_regset *h_blank_end_regs;
+	const struct vga_regset *h_sync_start_regs;
+	const struct vga_regset *h_sync_end_regs;
+
+	const struct vga_regset *v_total_regs;
+	const struct vga_regset *v_display_regs;
+	const struct vga_regset *v_blank_start_regs;
+	const struct vga_regset *v_blank_end_regs;
+	const struct vga_regset *v_sync_start_regs;
+	const struct vga_regset *v_sync_end_regs;
+};
+
+struct svga_pll {
+	u16 m_min;
+	u16 m_max;
+	u16 n_min;
+	u16 n_max;
+	u16 r_min;
+	u16 r_max;  /* r_max < 32 */
+	u32 f_vco_min;
+	u32 f_vco_max;
+	u32 f_base;
+};
+
+
+/* Write a value to the attribute register */
+
+static inline void svga_wattr(void __iomem *regbase, u8 index, u8 data)
+{
+	vga_r(regbase, VGA_IS1_RC);
+	vga_w(regbase, VGA_ATT_IW, index);
+	vga_w(regbase, VGA_ATT_W, data);
+}
+
+/* Write a value to a sequence register with a mask */
+
+static inline void svga_wseq_mask(void __iomem *regbase, u8 index, u8 data, u8 mask)
+{
+	vga_wseq(regbase, index, (data & mask) | (vga_rseq(regbase, index) & ~mask));
+}
+
+/* Write a value to a CRT register with a mask */
+
+static inline void svga_wcrt_mask(void __iomem *regbase, u8 index, u8 data, u8 mask)
+{
+	vga_wcrt(regbase, index, (data & mask) | (vga_rcrt(regbase, index) & ~mask));
+}
+
+static inline int svga_primary_device(struct pci_dev *dev)
+{
+	u16 flags;
+	pci_read_config_word(dev, PCI_COMMAND, &flags);
+	return (flags & PCI_COMMAND_IO);
+}
+
+
+void svga_wcrt_multi(void __iomem *regbase, const struct vga_regset *regset, u32 value);
+void svga_wseq_multi(void __iomem *regbase, const struct vga_regset *regset, u32 value);
+
+void svga_set_default_gfx_regs(void __iomem *regbase);
+void svga_set_default_atc_regs(void __iomem *regbase);
+void svga_set_default_seq_regs(void __iomem *regbase);
+void svga_set_default_crt_regs(void __iomem *regbase);
+void svga_set_textmode_vga_regs(void __iomem *regbase);
+
+void svga_settile(struct fb_info *info, struct fb_tilemap *map);
+void svga_tilecopy(struct fb_info *info, struct fb_tilearea *area);
+void svga_tilefill(struct fb_info *info, struct fb_tilerect *rect);
+void svga_tileblit(struct fb_info *info, struct fb_tileblit *blit);
+void svga_tilecursor(void __iomem *regbase, struct fb_info *info, struct fb_tilecursor *cursor);
+int svga_get_tilemax(struct fb_info *info);
+void svga_get_caps(struct fb_info *info, struct fb_blit_caps *caps,
+		   struct fb_var_screeninfo *var);
+
+int svga_compute_pll(const struct svga_pll *pll, u32 f_wanted, u16 *m, u16 *n, u16 *r, int node);
+int svga_check_timings(const struct svga_timing_regs *tm, struct fb_var_screeninfo *var, int node);
+void svga_set_timings(void __iomem *regbase, const struct svga_timing_regs *tm, struct fb_var_screeninfo *var, u32 hmul, u32 hdiv, u32 vmul, u32 vdiv, u32 hborder, int node);
+
+int svga_match_format(const struct svga_fb_format *frm, struct fb_var_screeninfo *var, struct fb_fix_screeninfo *fix);
+
+#endif /* _LINUX_SVGA_H */
+
diff --git a/include/linux/sw_sync.h b/include/linux/sw_sync.h
new file mode 100644
index 00000000..bd6f2089
--- /dev/null
+++ b/include/linux/sw_sync.h
@@ -0,0 +1,58 @@
+/*
+ * include/linux/sw_sync.h
+ *
+ * Copyright (C) 2012 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _LINUX_SW_SYNC_H
+#define _LINUX_SW_SYNC_H
+
+#include <linux/types.h>
+
+#ifdef __KERNEL__
+
+#include <linux/sync.h>
+
+struct sw_sync_timeline {
+	struct	sync_timeline	obj;
+
+	u32			value;
+};
+
+struct sw_sync_pt {
+	struct sync_pt		pt;
+
+	u32			value;
+};
+
+struct sw_sync_timeline *sw_sync_timeline_create(const char *name);
+void sw_sync_timeline_inc(struct sw_sync_timeline *obj, u32 inc);
+
+struct sync_pt *sw_sync_pt_create(struct sw_sync_timeline *obj, u32 value);
+
+#endif /* __KERNEL __ */
+
+struct sw_sync_create_fence_data {
+	__u32	value;
+	char	name[32];
+	__s32	fence; /* fd of new fence */
+};
+
+#define SW_SYNC_IOC_MAGIC	'W'
+
+#define SW_SYNC_IOC_CREATE_FENCE	_IOWR(SW_SYNC_IOC_MAGIC, 0,\
+		struct sw_sync_create_fence_data)
+#define SW_SYNC_IOC_INC			_IOW(SW_SYNC_IOC_MAGIC, 1, __u32)
+
+
+#endif /* _LINUX_SW_SYNC_H */
diff --git a/include/linux/swab.h b/include/linux/swab.h
new file mode 100644
index 00000000..ea0c02fd
--- /dev/null
+++ b/include/linux/swab.h
@@ -0,0 +1,299 @@
+#ifndef _LINUX_SWAB_H
+#define _LINUX_SWAB_H
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <asm/swab.h>
+
+/*
+ * casts are necessary for constants, because we never know how for sure
+ * how U/UL/ULL map to __u16, __u32, __u64. At least not in a portable way.
+ */
+#define ___constant_swab16(x) ((__u16)(				\
+	(((__u16)(x) & (__u16)0x00ffU) << 8) |			\
+	(((__u16)(x) & (__u16)0xff00U) >> 8)))
+
+#define ___constant_swab32(x) ((__u32)(				\
+	(((__u32)(x) & (__u32)0x000000ffUL) << 24) |		\
+	(((__u32)(x) & (__u32)0x0000ff00UL) <<  8) |		\
+	(((__u32)(x) & (__u32)0x00ff0000UL) >>  8) |		\
+	(((__u32)(x) & (__u32)0xff000000UL) >> 24)))
+
+#define ___constant_swab64(x) ((__u64)(				\
+	(((__u64)(x) & (__u64)0x00000000000000ffULL) << 56) |	\
+	(((__u64)(x) & (__u64)0x000000000000ff00ULL) << 40) |	\
+	(((__u64)(x) & (__u64)0x0000000000ff0000ULL) << 24) |	\
+	(((__u64)(x) & (__u64)0x00000000ff000000ULL) <<  8) |	\
+	(((__u64)(x) & (__u64)0x000000ff00000000ULL) >>  8) |	\
+	(((__u64)(x) & (__u64)0x0000ff0000000000ULL) >> 24) |	\
+	(((__u64)(x) & (__u64)0x00ff000000000000ULL) >> 40) |	\
+	(((__u64)(x) & (__u64)0xff00000000000000ULL) >> 56)))
+
+#define ___constant_swahw32(x) ((__u32)(			\
+	(((__u32)(x) & (__u32)0x0000ffffUL) << 16) |		\
+	(((__u32)(x) & (__u32)0xffff0000UL) >> 16)))
+
+#define ___constant_swahb32(x) ((__u32)(			\
+	(((__u32)(x) & (__u32)0x00ff00ffUL) << 8) |		\
+	(((__u32)(x) & (__u32)0xff00ff00UL) >> 8)))
+
+/*
+ * Implement the following as inlines, but define the interface using
+ * macros to allow constant folding when possible:
+ * ___swab16, ___swab32, ___swab64, ___swahw32, ___swahb32
+ */
+
+static inline __attribute_const__ __u16 __fswab16(__u16 val)
+{
+#ifdef __arch_swab16
+	return __arch_swab16(val);
+#else
+	return ___constant_swab16(val);
+#endif
+}
+
+static inline __attribute_const__ __u32 __fswab32(__u32 val)
+{
+#ifdef __arch_swab32
+	return __arch_swab32(val);
+#else
+	return ___constant_swab32(val);
+#endif
+}
+
+static inline __attribute_const__ __u64 __fswab64(__u64 val)
+{
+#ifdef __arch_swab64
+	return __arch_swab64(val);
+#elif defined(__SWAB_64_THRU_32__)
+	__u32 h = val >> 32;
+	__u32 l = val & ((1ULL << 32) - 1);
+	return (((__u64)__fswab32(l)) << 32) | ((__u64)(__fswab32(h)));
+#else
+	return ___constant_swab64(val);
+#endif
+}
+
+static inline __attribute_const__ __u32 __fswahw32(__u32 val)
+{
+#ifdef __arch_swahw32
+	return __arch_swahw32(val);
+#else
+	return ___constant_swahw32(val);
+#endif
+}
+
+static inline __attribute_const__ __u32 __fswahb32(__u32 val)
+{
+#ifdef __arch_swahb32
+	return __arch_swahb32(val);
+#else
+	return ___constant_swahb32(val);
+#endif
+}
+
+/**
+ * __swab16 - return a byteswapped 16-bit value
+ * @x: value to byteswap
+ */
+#define __swab16(x)				\
+	(__builtin_constant_p((__u16)(x)) ?	\
+	___constant_swab16(x) :			\
+	__fswab16(x))
+
+/**
+ * __swab32 - return a byteswapped 32-bit value
+ * @x: value to byteswap
+ */
+#define __swab32(x)				\
+	(__builtin_constant_p((__u32)(x)) ?	\
+	___constant_swab32(x) :			\
+	__fswab32(x))
+
+/**
+ * __swab64 - return a byteswapped 64-bit value
+ * @x: value to byteswap
+ */
+#define __swab64(x)				\
+	(__builtin_constant_p((__u64)(x)) ?	\
+	___constant_swab64(x) :			\
+	__fswab64(x))
+
+/**
+ * __swahw32 - return a word-swapped 32-bit value
+ * @x: value to wordswap
+ *
+ * __swahw32(0x12340000) is 0x00001234
+ */
+#define __swahw32(x)				\
+	(__builtin_constant_p((__u32)(x)) ?	\
+	___constant_swahw32(x) :		\
+	__fswahw32(x))
+
+/**
+ * __swahb32 - return a high and low byte-swapped 32-bit value
+ * @x: value to byteswap
+ *
+ * __swahb32(0x12345678) is 0x34127856
+ */
+#define __swahb32(x)				\
+	(__builtin_constant_p((__u32)(x)) ?	\
+	___constant_swahb32(x) :		\
+	__fswahb32(x))
+
+/**
+ * __swab16p - return a byteswapped 16-bit value from a pointer
+ * @p: pointer to a naturally-aligned 16-bit value
+ */
+static inline __u16 __swab16p(const __u16 *p)
+{
+#ifdef __arch_swab16p
+	return __arch_swab16p(p);
+#else
+	return __swab16(*p);
+#endif
+}
+
+/**
+ * __swab32p - return a byteswapped 32-bit value from a pointer
+ * @p: pointer to a naturally-aligned 32-bit value
+ */
+static inline __u32 __swab32p(const __u32 *p)
+{
+#ifdef __arch_swab32p
+	return __arch_swab32p(p);
+#else
+	return __swab32(*p);
+#endif
+}
+
+/**
+ * __swab64p - return a byteswapped 64-bit value from a pointer
+ * @p: pointer to a naturally-aligned 64-bit value
+ */
+static inline __u64 __swab64p(const __u64 *p)
+{
+#ifdef __arch_swab64p
+	return __arch_swab64p(p);
+#else
+	return __swab64(*p);
+#endif
+}
+
+/**
+ * __swahw32p - return a wordswapped 32-bit value from a pointer
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahw32() for details of wordswapping.
+ */
+static inline __u32 __swahw32p(const __u32 *p)
+{
+#ifdef __arch_swahw32p
+	return __arch_swahw32p(p);
+#else
+	return __swahw32(*p);
+#endif
+}
+
+/**
+ * __swahb32p - return a high and low byteswapped 32-bit value from a pointer
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahb32() for details of high/low byteswapping.
+ */
+static inline __u32 __swahb32p(const __u32 *p)
+{
+#ifdef __arch_swahb32p
+	return __arch_swahb32p(p);
+#else
+	return __swahb32(*p);
+#endif
+}
+
+/**
+ * __swab16s - byteswap a 16-bit value in-place
+ * @p: pointer to a naturally-aligned 16-bit value
+ */
+static inline void __swab16s(__u16 *p)
+{
+#ifdef __arch_swab16s
+	__arch_swab16s(p);
+#else
+	*p = __swab16p(p);
+#endif
+}
+/**
+ * __swab32s - byteswap a 32-bit value in-place
+ * @p: pointer to a naturally-aligned 32-bit value
+ */
+static inline void __swab32s(__u32 *p)
+{
+#ifdef __arch_swab32s
+	__arch_swab32s(p);
+#else
+	*p = __swab32p(p);
+#endif
+}
+
+/**
+ * __swab64s - byteswap a 64-bit value in-place
+ * @p: pointer to a naturally-aligned 64-bit value
+ */
+static inline void __swab64s(__u64 *p)
+{
+#ifdef __arch_swab64s
+	__arch_swab64s(p);
+#else
+	*p = __swab64p(p);
+#endif
+}
+
+/**
+ * __swahw32s - wordswap a 32-bit value in-place
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahw32() for details of wordswapping
+ */
+static inline void __swahw32s(__u32 *p)
+{
+#ifdef __arch_swahw32s
+	__arch_swahw32s(p);
+#else
+	*p = __swahw32p(p);
+#endif
+}
+
+/**
+ * __swahb32s - high and low byteswap a 32-bit value in-place
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahb32() for details of high and low byte swapping
+ */
+static inline void __swahb32s(__u32 *p)
+{
+#ifdef __arch_swahb32s
+	__arch_swahb32s(p);
+#else
+	*p = __swahb32p(p);
+#endif
+}
+
+#ifdef __KERNEL__
+# define swab16 __swab16
+# define swab32 __swab32
+# define swab64 __swab64
+# define swahw32 __swahw32
+# define swahb32 __swahb32
+# define swab16p __swab16p
+# define swab32p __swab32p
+# define swab64p __swab64p
+# define swahw32p __swahw32p
+# define swahb32p __swahb32p
+# define swab16s __swab16s
+# define swab32s __swab32s
+# define swab64s __swab64s
+# define swahw32s __swahw32s
+# define swahb32s __swahb32s
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_SWAB_H */
diff --git a/include/linux/swap.h b/include/linux/swap.h
new file mode 100644
index 00000000..b1fd5c79
--- /dev/null
+++ b/include/linux/swap.h
@@ -0,0 +1,512 @@
+#ifndef _LINUX_SWAP_H
+#define _LINUX_SWAP_H
+
+#include <linux/spinlock.h>
+#include <linux/linkage.h>
+#include <linux/mmzone.h>
+#include <linux/list.h>
+#include <linux/memcontrol.h>
+#include <linux/sched.h>
+#include <linux/node.h>
+
+#include <linux/atomic.h>
+#include <asm/page.h>
+
+struct notifier_block;
+
+struct bio;
+
+#define SWAP_FLAG_PREFER	0x8000	/* set if swap priority specified */
+#define SWAP_FLAG_PRIO_MASK	0x7fff
+#define SWAP_FLAG_PRIO_SHIFT	0
+#define SWAP_FLAG_DISCARD	0x10000 /* discard swap cluster after use */
+
+#define SWAP_FLAGS_VALID	(SWAP_FLAG_PRIO_MASK | SWAP_FLAG_PREFER | \
+				 SWAP_FLAG_DISCARD)
+
+static inline int current_is_kswapd(void)
+{
+	return current->flags & PF_KSWAPD;
+}
+
+/*
+ * MAX_SWAPFILES defines the maximum number of swaptypes: things which can
+ * be swapped to.  The swap type and the offset into that swap type are
+ * encoded into pte's and into pgoff_t's in the swapcache.  Using five bits
+ * for the type means that the maximum number of swapcache pages is 27 bits
+ * on 32-bit-pgoff_t architectures.  And that assumes that the architecture packs
+ * the type/offset into the pte as 5/27 as well.
+ */
+#define MAX_SWAPFILES_SHIFT	5
+
+/*
+ * Use some of the swap files numbers for other purposes. This
+ * is a convenient way to hook into the VM to trigger special
+ * actions on faults.
+ */
+
+/*
+ * NUMA node memory migration support
+ */
+#ifdef CONFIG_MIGRATION
+#define SWP_MIGRATION_NUM 2
+#define SWP_MIGRATION_READ	(MAX_SWAPFILES + SWP_HWPOISON_NUM)
+#define SWP_MIGRATION_WRITE	(MAX_SWAPFILES + SWP_HWPOISON_NUM + 1)
+#else
+#define SWP_MIGRATION_NUM 0
+#endif
+
+/*
+ * Handling of hardware poisoned pages with memory corruption.
+ */
+#ifdef CONFIG_MEMORY_FAILURE
+#define SWP_HWPOISON_NUM 1
+#define SWP_HWPOISON		MAX_SWAPFILES
+#else
+#define SWP_HWPOISON_NUM 0
+#endif
+
+#define MAX_SWAPFILES \
+	((1 << MAX_SWAPFILES_SHIFT) - SWP_MIGRATION_NUM - SWP_HWPOISON_NUM)
+
+/*
+ * Magic header for a swap area. The first part of the union is
+ * what the swap magic looks like for the old (limited to 128MB)
+ * swap area format, the second part of the union adds - in the
+ * old reserved area - some extra information. Note that the first
+ * kilobyte is reserved for boot loader or disk label stuff...
+ *
+ * Having the magic at the end of the PAGE_SIZE makes detecting swap
+ * areas somewhat tricky on machines that support multiple page sizes.
+ * For 2.5 we'll probably want to move the magic to just beyond the
+ * bootbits...
+ */
+union swap_header {
+	struct {
+		char reserved[PAGE_SIZE - 10];
+		char magic[10];			/* SWAP-SPACE or SWAPSPACE2 */
+	} magic;
+	struct {
+		char		bootbits[1024];	/* Space for disklabel etc. */
+		__u32		version;
+		__u32		last_page;
+		__u32		nr_badpages;
+		unsigned char	sws_uuid[16];
+		unsigned char	sws_volume[16];
+		__u32		padding[117];
+		__u32		badpages[1];
+	} info;
+};
+
+ /* A swap entry has to fit into a "unsigned long", as
+  * the entry is hidden in the "index" field of the
+  * swapper address space.
+  */
+typedef struct {
+	unsigned long val;
+} swp_entry_t;
+
+/*
+ * current->reclaim_state points to one of these when a task is running
+ * memory reclaim
+ */
+struct reclaim_state {
+	unsigned long reclaimed_slab;
+};
+
+#ifdef __KERNEL__
+
+struct address_space;
+struct sysinfo;
+struct writeback_control;
+struct zone;
+
+/*
+ * A swap extent maps a range of a swapfile's PAGE_SIZE pages onto a range of
+ * disk blocks.  A list of swap extents maps the entire swapfile.  (Where the
+ * term `swapfile' refers to either a blockdevice or an IS_REG file.  Apart
+ * from setup, they're handled identically.
+ *
+ * We always assume that blocks are of size PAGE_SIZE.
+ */
+struct swap_extent {
+	struct list_head list;
+	pgoff_t start_page;
+	pgoff_t nr_pages;
+	sector_t start_block;
+};
+
+/*
+ * Max bad pages in the new format..
+ */
+#define __swapoffset(x) ((unsigned long)&((union swap_header *)0)->x)
+#define MAX_SWAP_BADPAGES \
+	((__swapoffset(magic.magic) - __swapoffset(info.badpages)) / sizeof(int))
+
+enum {
+	SWP_USED	= (1 << 0),	/* is slot in swap_info[] used? */
+	SWP_WRITEOK	= (1 << 1),	/* ok to write to this swap?	*/
+	SWP_DISCARDABLE = (1 << 2),	/* swapon+blkdev support discard */
+	SWP_DISCARDING	= (1 << 3),	/* now discarding a free cluster */
+	SWP_SOLIDSTATE	= (1 << 4),	/* blkdev seeks are cheap */
+	SWP_CONTINUED	= (1 << 5),	/* swap_map has count continuation */
+	SWP_BLKDEV	= (1 << 6),	/* its a block device */
+					/* add others here before... */
+	SWP_SCANNING	= (1 << 8),	/* refcount in scan_swap_map */
+};
+
+#define SWAP_CLUSTER_MAX 32
+#define COMPACT_CLUSTER_MAX SWAP_CLUSTER_MAX
+
+/*
+ * Ratio between the present memory in the zone and the "gap" that
+ * we're allowing kswapd to shrink in addition to the per-zone high
+ * wmark, even for zones that already have the high wmark satisfied,
+ * in order to provide better per-zone lru behavior. We are ok to
+ * spend not more than 1% of the memory for this zone balancing "gap".
+ */
+#define KSWAPD_ZONE_BALANCE_GAP_RATIO 100
+
+#define SWAP_MAP_MAX	0x3e	/* Max duplication count, in first swap_map */
+#define SWAP_MAP_BAD	0x3f	/* Note pageblock is bad, in first swap_map */
+#define SWAP_HAS_CACHE	0x40	/* Flag page is cached, in first swap_map */
+#define SWAP_CONT_MAX	0x7f	/* Max count, in each swap_map continuation */
+#define COUNT_CONTINUED	0x80	/* See swap_map continuation for full count */
+#define SWAP_MAP_SHMEM	0xbf	/* Owned by shmem/tmpfs, in first swap_map */
+
+/*
+ * The in-memory structure used to track swap areas.
+ */
+struct swap_info_struct {
+	unsigned long	flags;		/* SWP_USED etc: see above */
+	signed short	prio;		/* swap priority of this type */
+	signed char	type;		/* strange name for an index */
+	signed char	next;		/* next type on the swap list */
+	unsigned int	max;		/* extent of the swap_map */
+	unsigned char *swap_map;	/* vmalloc'ed array of usage counts */
+	unsigned int lowest_bit;	/* index of first free in swap_map */
+	unsigned int highest_bit;	/* index of last free in swap_map */
+	unsigned int pages;		/* total of usable pages of swap */
+	unsigned int inuse_pages;	/* number of those currently in use */
+	unsigned int cluster_next;	/* likely index for next allocation */
+	unsigned int cluster_nr;	/* countdown to next cluster search */
+	unsigned int lowest_alloc;	/* while preparing discard cluster */
+	unsigned int highest_alloc;	/* while preparing discard cluster */
+	struct swap_extent *curr_swap_extent;
+	struct swap_extent first_swap_extent;
+	struct block_device *bdev;	/* swap device or bdev of swap file */
+	struct file *swap_file;		/* seldom referenced */
+	unsigned int old_block_size;	/* seldom referenced */
+};
+
+struct swap_list_t {
+	int head;	/* head of priority-ordered swapfile list */
+	int next;	/* swapfile to be used next */
+};
+
+/* Swap 50% full? Release swapcache more aggressively.. */
+#define vm_swap_full() (nr_swap_pages*2 < total_swap_pages)
+
+/* linux/mm/page_alloc.c */
+extern unsigned long totalram_pages;
+extern unsigned long totalreserve_pages;
+extern unsigned long dirty_balance_reserve;
+extern unsigned int nr_free_buffer_pages(void);
+extern unsigned int nr_free_pagecache_pages(void);
+
+/* Definition of global_page_state not available yet */
+#define nr_free_pages() global_page_state(NR_FREE_PAGES)
+
+
+/* linux/mm/swap.c */
+extern void __lru_cache_add(struct page *, enum lru_list lru);
+extern void lru_cache_add_lru(struct page *, enum lru_list lru);
+extern void lru_add_page_tail(struct zone* zone,
+			      struct page *page, struct page *page_tail);
+extern void activate_page(struct page *);
+extern void mark_page_accessed(struct page *);
+extern void lru_add_drain(void);
+extern void lru_add_drain_cpu(int cpu);
+extern int lru_add_drain_all(void);
+extern void rotate_reclaimable_page(struct page *page);
+extern void deactivate_page(struct page *page);
+extern void swap_setup(void);
+
+extern void add_page_to_unevictable_list(struct page *page);
+
+/**
+ * lru_cache_add: add a page to the page lists
+ * @page: the page to add
+ */
+static inline void lru_cache_add_anon(struct page *page)
+{
+	__lru_cache_add(page, LRU_INACTIVE_ANON);
+}
+
+static inline void lru_cache_add_file(struct page *page)
+{
+	__lru_cache_add(page, LRU_INACTIVE_FILE);
+}
+
+/* linux/mm/vmscan.c */
+extern unsigned long try_to_free_pages(struct zonelist *zonelist, int order,
+					gfp_t gfp_mask, nodemask_t *mask);
+extern int __isolate_lru_page(struct page *page, isolate_mode_t mode, int file);
+extern unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem,
+						  gfp_t gfp_mask, bool noswap);
+extern unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem,
+						gfp_t gfp_mask, bool noswap,
+						struct zone *zone,
+						unsigned long *nr_scanned);
+extern unsigned long shrink_all_memory(unsigned long nr_pages);
+extern int vm_swappiness;
+extern int remove_mapping(struct address_space *mapping, struct page *page);
+extern long vm_total_pages;
+
+#ifdef CONFIG_NUMA
+extern int zone_reclaim_mode;
+extern int sysctl_min_unmapped_ratio;
+extern int sysctl_min_slab_ratio;
+extern int zone_reclaim(struct zone *, gfp_t, unsigned int);
+#else
+#define zone_reclaim_mode 0
+static inline int zone_reclaim(struct zone *z, gfp_t mask, unsigned int order)
+{
+	return 0;
+}
+#endif
+
+extern int page_evictable(struct page *page, struct vm_area_struct *vma);
+extern void check_move_unevictable_pages(struct page **, int nr_pages);
+
+extern unsigned long scan_unevictable_pages;
+extern int scan_unevictable_handler(struct ctl_table *, int,
+					void __user *, size_t *, loff_t *);
+#ifdef CONFIG_NUMA
+extern int scan_unevictable_register_node(struct node *node);
+extern void scan_unevictable_unregister_node(struct node *node);
+#else
+static inline int scan_unevictable_register_node(struct node *node)
+{
+	return 0;
+}
+static inline void scan_unevictable_unregister_node(struct node *node)
+{
+}
+#endif
+
+extern int kswapd_run(int nid);
+extern void kswapd_stop(int nid);
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
+extern int mem_cgroup_swappiness(struct mem_cgroup *mem);
+#else
+static inline int mem_cgroup_swappiness(struct mem_cgroup *mem)
+{
+	return vm_swappiness;
+}
+#endif
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
+extern void mem_cgroup_uncharge_swap(swp_entry_t ent);
+#else
+static inline void mem_cgroup_uncharge_swap(swp_entry_t ent)
+{
+}
+#endif
+#ifdef CONFIG_SWAP
+/* linux/mm/page_io.c */
+extern int swap_readpage(struct page *);
+extern int swap_writepage(struct page *page, struct writeback_control *wbc);
+extern void end_swap_bio_read(struct bio *bio, int err);
+
+/* linux/mm/swap_state.c */
+extern struct address_space swapper_space;
+#define total_swapcache_pages  swapper_space.nrpages
+extern void show_swap_cache_info(void);
+extern int add_to_swap(struct page *);
+extern int add_to_swap_cache(struct page *, swp_entry_t, gfp_t);
+extern void __delete_from_swap_cache(struct page *);
+extern void delete_from_swap_cache(struct page *);
+extern void free_page_and_swap_cache(struct page *);
+extern void free_pages_and_swap_cache(struct page **, int);
+extern struct page *lookup_swap_cache(swp_entry_t);
+extern struct page *read_swap_cache_async(swp_entry_t, gfp_t,
+			struct vm_area_struct *vma, unsigned long addr);
+extern struct page *swapin_readahead(swp_entry_t, gfp_t,
+			struct vm_area_struct *vma, unsigned long addr);
+
+/* linux/mm/swapfile.c */
+extern long nr_swap_pages;
+extern long total_swap_pages;
+extern void si_swapinfo(struct sysinfo *);
+extern swp_entry_t get_swap_page(void);
+extern swp_entry_t get_swap_page_of_type(int);
+extern int add_swap_count_continuation(swp_entry_t, gfp_t);
+extern void swap_shmem_alloc(swp_entry_t);
+extern int swap_duplicate(swp_entry_t);
+extern int swapcache_prepare(swp_entry_t);
+extern void swap_free(swp_entry_t);
+extern void swapcache_free(swp_entry_t, struct page *page);
+extern int free_swap_and_cache(swp_entry_t);
+extern int swap_type_of(dev_t, sector_t, struct block_device **);
+extern unsigned int count_swap_pages(int, int);
+extern sector_t map_swap_page(struct page *, struct block_device **);
+extern sector_t swapdev_block(int, pgoff_t);
+extern int reuse_swap_page(struct page *);
+extern int try_to_free_swap(struct page *);
+struct backing_dev_info;
+
+/* linux/mm/thrash.c */
+extern struct mm_struct *swap_token_mm;
+extern void grab_swap_token(struct mm_struct *);
+extern void __put_swap_token(struct mm_struct *);
+extern void disable_swap_token(struct mem_cgroup *memcg);
+
+static inline int has_swap_token(struct mm_struct *mm)
+{
+	return (mm == swap_token_mm);
+}
+
+static inline void put_swap_token(struct mm_struct *mm)
+{
+	if (has_swap_token(mm))
+		__put_swap_token(mm);
+}
+
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
+extern void
+mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent, bool swapout);
+extern int mem_cgroup_count_swap_user(swp_entry_t ent, struct page **pagep);
+#else
+static inline void
+mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent, bool swapout)
+{
+}
+#endif
+
+#else /* CONFIG_SWAP */
+
+#define nr_swap_pages				0L
+#define total_swap_pages			0L
+#define total_swapcache_pages			0UL
+
+#define si_swapinfo(val) \
+	do { (val)->freeswap = (val)->totalswap = 0; } while (0)
+/* only sparc can not include linux/pagemap.h in this file
+ * so leave page_cache_release and release_pages undeclared... */
+#define free_page_and_swap_cache(page) \
+	page_cache_release(page)
+#define free_pages_and_swap_cache(pages, nr) \
+	release_pages((pages), (nr), 0);
+
+static inline void show_swap_cache_info(void)
+{
+}
+
+#define free_swap_and_cache(swp)	is_migration_entry(swp)
+#define swapcache_prepare(swp)		is_migration_entry(swp)
+
+static inline int add_swap_count_continuation(swp_entry_t swp, gfp_t gfp_mask)
+{
+	return 0;
+}
+
+static inline void swap_shmem_alloc(swp_entry_t swp)
+{
+}
+
+static inline int swap_duplicate(swp_entry_t swp)
+{
+	return 0;
+}
+
+static inline void swap_free(swp_entry_t swp)
+{
+}
+
+static inline void swapcache_free(swp_entry_t swp, struct page *page)
+{
+}
+
+static inline struct page *swapin_readahead(swp_entry_t swp, gfp_t gfp_mask,
+			struct vm_area_struct *vma, unsigned long addr)
+{
+	return NULL;
+}
+
+static inline int swap_writepage(struct page *p, struct writeback_control *wbc)
+{
+	return 0;
+}
+
+static inline struct page *lookup_swap_cache(swp_entry_t swp)
+{
+	return NULL;
+}
+
+static inline int add_to_swap(struct page *page)
+{
+	return 0;
+}
+
+static inline int add_to_swap_cache(struct page *page, swp_entry_t entry,
+							gfp_t gfp_mask)
+{
+	return -1;
+}
+
+static inline void __delete_from_swap_cache(struct page *page)
+{
+}
+
+static inline void delete_from_swap_cache(struct page *page)
+{
+}
+
+#define reuse_swap_page(page)	(page_mapcount(page) == 1)
+
+static inline int try_to_free_swap(struct page *page)
+{
+	return 0;
+}
+
+static inline swp_entry_t get_swap_page(void)
+{
+	swp_entry_t entry;
+	entry.val = 0;
+	return entry;
+}
+
+/* linux/mm/thrash.c */
+static inline void put_swap_token(struct mm_struct *mm)
+{
+}
+
+static inline void grab_swap_token(struct mm_struct *mm)
+{
+}
+
+static inline int has_swap_token(struct mm_struct *mm)
+{
+	return 0;
+}
+
+static inline void disable_swap_token(struct mem_cgroup *memcg)
+{
+}
+
+static inline void
+mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent)
+{
+}
+
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
+static inline int
+mem_cgroup_count_swap_user(swp_entry_t ent, struct page **pagep)
+{
+	return 0;
+}
+#endif
+
+#endif /* CONFIG_SWAP */
+#endif /* __KERNEL__*/
+#endif /* _LINUX_SWAP_H */
diff --git a/include/linux/swapops.h b/include/linux/swapops.h
new file mode 100644
index 00000000..47ead515
--- /dev/null
+++ b/include/linux/swapops.h
@@ -0,0 +1,197 @@
+#ifndef _LINUX_SWAPOPS_H
+#define _LINUX_SWAPOPS_H
+
+#include <linux/radix-tree.h>
+#include <linux/bug.h>
+
+/*
+ * swapcache pages are stored in the swapper_space radix tree.  We want to
+ * get good packing density in that tree, so the index should be dense in
+ * the low-order bits.
+ *
+ * We arrange the `type' and `offset' fields so that `type' is at the seven
+ * high-order bits of the swp_entry_t and `offset' is right-aligned in the
+ * remaining bits.  Although `type' itself needs only five bits, we allow for
+ * shmem/tmpfs to shift it all up a further two bits: see swp_to_radix_entry().
+ *
+ * swp_entry_t's are *never* stored anywhere in their arch-dependent format.
+ */
+#define SWP_TYPE_SHIFT(e)	((sizeof(e.val) * 8) - \
+			(MAX_SWAPFILES_SHIFT + RADIX_TREE_EXCEPTIONAL_SHIFT))
+#define SWP_OFFSET_MASK(e)	((1UL << SWP_TYPE_SHIFT(e)) - 1)
+
+/*
+ * Store a type+offset into a swp_entry_t in an arch-independent format
+ */
+static inline swp_entry_t swp_entry(unsigned long type, pgoff_t offset)
+{
+	swp_entry_t ret;
+
+	ret.val = (type << SWP_TYPE_SHIFT(ret)) |
+			(offset & SWP_OFFSET_MASK(ret));
+	return ret;
+}
+
+/*
+ * Extract the `type' field from a swp_entry_t.  The swp_entry_t is in
+ * arch-independent format
+ */
+static inline unsigned swp_type(swp_entry_t entry)
+{
+	return (entry.val >> SWP_TYPE_SHIFT(entry));
+}
+
+/*
+ * Extract the `offset' field from a swp_entry_t.  The swp_entry_t is in
+ * arch-independent format
+ */
+static inline pgoff_t swp_offset(swp_entry_t entry)
+{
+	return entry.val & SWP_OFFSET_MASK(entry);
+}
+
+#ifdef CONFIG_MMU
+/* check whether a pte points to a swap entry */
+static inline int is_swap_pte(pte_t pte)
+{
+	return !pte_none(pte) && !pte_present(pte) && !pte_file(pte);
+}
+#endif
+
+/*
+ * Convert the arch-dependent pte representation of a swp_entry_t into an
+ * arch-independent swp_entry_t.
+ */
+static inline swp_entry_t pte_to_swp_entry(pte_t pte)
+{
+	swp_entry_t arch_entry;
+
+	BUG_ON(pte_file(pte));
+	arch_entry = __pte_to_swp_entry(pte);
+	return swp_entry(__swp_type(arch_entry), __swp_offset(arch_entry));
+}
+
+/*
+ * Convert the arch-independent representation of a swp_entry_t into the
+ * arch-dependent pte representation.
+ */
+static inline pte_t swp_entry_to_pte(swp_entry_t entry)
+{
+	swp_entry_t arch_entry;
+
+	arch_entry = __swp_entry(swp_type(entry), swp_offset(entry));
+	BUG_ON(pte_file(__swp_entry_to_pte(arch_entry)));
+	return __swp_entry_to_pte(arch_entry);
+}
+
+static inline swp_entry_t radix_to_swp_entry(void *arg)
+{
+	swp_entry_t entry;
+
+	entry.val = (unsigned long)arg >> RADIX_TREE_EXCEPTIONAL_SHIFT;
+	return entry;
+}
+
+static inline void *swp_to_radix_entry(swp_entry_t entry)
+{
+	unsigned long value;
+
+	value = entry.val << RADIX_TREE_EXCEPTIONAL_SHIFT;
+	return (void *)(value | RADIX_TREE_EXCEPTIONAL_ENTRY);
+}
+
+#ifdef CONFIG_MIGRATION
+static inline swp_entry_t make_migration_entry(struct page *page, int write)
+{
+	BUG_ON(!PageLocked(page));
+	return swp_entry(write ? SWP_MIGRATION_WRITE : SWP_MIGRATION_READ,
+			page_to_pfn(page));
+}
+
+static inline int is_migration_entry(swp_entry_t entry)
+{
+	return unlikely(swp_type(entry) == SWP_MIGRATION_READ ||
+			swp_type(entry) == SWP_MIGRATION_WRITE);
+}
+
+static inline int is_write_migration_entry(swp_entry_t entry)
+{
+	return unlikely(swp_type(entry) == SWP_MIGRATION_WRITE);
+}
+
+static inline struct page *migration_entry_to_page(swp_entry_t entry)
+{
+	struct page *p = pfn_to_page(swp_offset(entry));
+	/*
+	 * Any use of migration entries may only occur while the
+	 * corresponding page is locked
+	 */
+	BUG_ON(!PageLocked(p));
+	return p;
+}
+
+static inline void make_migration_entry_read(swp_entry_t *entry)
+{
+	*entry = swp_entry(SWP_MIGRATION_READ, swp_offset(*entry));
+}
+
+extern void migration_entry_wait(struct mm_struct *mm, pmd_t *pmd,
+					unsigned long address);
+#else
+
+#define make_migration_entry(page, write) swp_entry(0, 0)
+static inline int is_migration_entry(swp_entry_t swp)
+{
+	return 0;
+}
+#define migration_entry_to_page(swp) NULL
+static inline void make_migration_entry_read(swp_entry_t *entryp) { }
+static inline void migration_entry_wait(struct mm_struct *mm, pmd_t *pmd,
+					 unsigned long address) { }
+static inline int is_write_migration_entry(swp_entry_t entry)
+{
+	return 0;
+}
+
+#endif
+
+#ifdef CONFIG_MEMORY_FAILURE
+/*
+ * Support for hardware poisoned pages
+ */
+static inline swp_entry_t make_hwpoison_entry(struct page *page)
+{
+	BUG_ON(!PageLocked(page));
+	return swp_entry(SWP_HWPOISON, page_to_pfn(page));
+}
+
+static inline int is_hwpoison_entry(swp_entry_t entry)
+{
+	return swp_type(entry) == SWP_HWPOISON;
+}
+#else
+
+static inline swp_entry_t make_hwpoison_entry(struct page *page)
+{
+	return swp_entry(0, 0);
+}
+
+static inline int is_hwpoison_entry(swp_entry_t swp)
+{
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_MEMORY_FAILURE) || defined(CONFIG_MIGRATION)
+static inline int non_swap_entry(swp_entry_t entry)
+{
+	return swp_type(entry) >= MAX_SWAPFILES;
+}
+#else
+static inline int non_swap_entry(swp_entry_t entry)
+{
+	return 0;
+}
+#endif
+
+#endif /* _LINUX_SWAPOPS_H */
diff --git a/include/linux/swiotlb.h b/include/linux/swiotlb.h
new file mode 100644
index 00000000..e872526f
--- /dev/null
+++ b/include/linux/swiotlb.h
@@ -0,0 +1,113 @@
+#ifndef __LINUX_SWIOTLB_H
+#define __LINUX_SWIOTLB_H
+
+#include <linux/types.h>
+
+struct device;
+struct dma_attrs;
+struct scatterlist;
+
+extern int swiotlb_force;
+
+/*
+ * Maximum allowable number of contiguous slabs to map,
+ * must be a power of 2.  What is the appropriate value ?
+ * The complexity of {map,unmap}_single is linearly dependent on this value.
+ */
+#define IO_TLB_SEGSIZE	128
+
+/*
+ * log of the size of each IO TLB slab.  The number of slabs is command line
+ * controllable.
+ */
+#define IO_TLB_SHIFT 11
+
+extern void swiotlb_init(int verbose);
+extern void swiotlb_init_with_tbl(char *tlb, unsigned long nslabs, int verbose);
+extern unsigned long swiotlb_nr_tbl(void);
+
+/*
+ * Enumeration for sync targets
+ */
+enum dma_sync_target {
+	SYNC_FOR_CPU = 0,
+	SYNC_FOR_DEVICE = 1,
+};
+extern void *swiotlb_tbl_map_single(struct device *hwdev, dma_addr_t tbl_dma_addr,
+				    phys_addr_t phys, size_t size,
+				    enum dma_data_direction dir);
+
+extern void swiotlb_tbl_unmap_single(struct device *hwdev, char *dma_addr,
+				     size_t size, enum dma_data_direction dir);
+
+extern void swiotlb_tbl_sync_single(struct device *hwdev, char *dma_addr,
+				    size_t size, enum dma_data_direction dir,
+				    enum dma_sync_target target);
+
+/* Accessory functions. */
+extern void swiotlb_bounce(phys_addr_t phys, char *dma_addr, size_t size,
+			   enum dma_data_direction dir);
+
+extern void
+*swiotlb_alloc_coherent(struct device *hwdev, size_t size,
+			dma_addr_t *dma_handle, gfp_t flags);
+
+extern void
+swiotlb_free_coherent(struct device *hwdev, size_t size,
+		      void *vaddr, dma_addr_t dma_handle);
+
+extern dma_addr_t swiotlb_map_page(struct device *dev, struct page *page,
+				   unsigned long offset, size_t size,
+				   enum dma_data_direction dir,
+				   struct dma_attrs *attrs);
+extern void swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
+			       size_t size, enum dma_data_direction dir,
+			       struct dma_attrs *attrs);
+
+extern int
+swiotlb_map_sg(struct device *hwdev, struct scatterlist *sg, int nents,
+	       enum dma_data_direction dir);
+
+extern void
+swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sg, int nents,
+		 enum dma_data_direction dir);
+
+extern int
+swiotlb_map_sg_attrs(struct device *hwdev, struct scatterlist *sgl, int nelems,
+		     enum dma_data_direction dir, struct dma_attrs *attrs);
+
+extern void
+swiotlb_unmap_sg_attrs(struct device *hwdev, struct scatterlist *sgl,
+		       int nelems, enum dma_data_direction dir,
+		       struct dma_attrs *attrs);
+
+extern void
+swiotlb_sync_single_for_cpu(struct device *hwdev, dma_addr_t dev_addr,
+			    size_t size, enum dma_data_direction dir);
+
+extern void
+swiotlb_sync_sg_for_cpu(struct device *hwdev, struct scatterlist *sg,
+			int nelems, enum dma_data_direction dir);
+
+extern void
+swiotlb_sync_single_for_device(struct device *hwdev, dma_addr_t dev_addr,
+			       size_t size, enum dma_data_direction dir);
+
+extern void
+swiotlb_sync_sg_for_device(struct device *hwdev, struct scatterlist *sg,
+			   int nelems, enum dma_data_direction dir);
+
+extern int
+swiotlb_dma_mapping_error(struct device *hwdev, dma_addr_t dma_addr);
+
+extern int
+swiotlb_dma_supported(struct device *hwdev, u64 mask);
+
+#ifdef CONFIG_SWIOTLB
+extern void __init swiotlb_free(void);
+#else
+static inline void swiotlb_free(void) { }
+#endif
+
+extern void swiotlb_print_info(void);
+#endif /* __LINUX_SWIOTLB_H */
diff --git a/include/linux/switch.h b/include/linux/switch.h
new file mode 100644
index 00000000..3e4c748e
--- /dev/null
+++ b/include/linux/switch.h
@@ -0,0 +1,53 @@
+/*
+ *  Switch class driver
+ *
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Mike Lockwood <lockwood@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+*/
+
+#ifndef __LINUX_SWITCH_H__
+#define __LINUX_SWITCH_H__
+
+struct switch_dev {
+	const char	*name;
+	struct device	*dev;
+	int		index;
+	int		state;
+
+	ssize_t	(*print_name)(struct switch_dev *sdev, char *buf);
+	ssize_t	(*print_state)(struct switch_dev *sdev, char *buf);
+};
+
+struct gpio_switch_platform_data {
+	const char *name;
+	unsigned 	gpio;
+
+	/* if NULL, switch_dev.name will be printed */
+	const char *name_on;
+	const char *name_off;
+	/* if NULL, "0" or "1" will be printed */
+	const char *state_on;
+	const char *state_off;
+};
+
+extern int switch_dev_register(struct switch_dev *sdev);
+extern void switch_dev_unregister(struct switch_dev *sdev);
+
+static inline int switch_get_state(struct switch_dev *sdev)
+{
+	return sdev->state;
+}
+
+extern void switch_set_state(struct switch_dev *sdev, int state);
+
+#endif /* __LINUX_SWITCH_H__ */
diff --git a/include/linux/synaptics_i2c_rmi.h b/include/linux/synaptics_i2c_rmi.h
new file mode 100644
index 00000000..5539cc52
--- /dev/null
+++ b/include/linux/synaptics_i2c_rmi.h
@@ -0,0 +1,55 @@
+/*
+ * include/linux/synaptics_i2c_rmi.h - platform data structure for f75375s sensor
+ *
+ * Copyright (C) 2008 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _LINUX_SYNAPTICS_I2C_RMI_H
+#define _LINUX_SYNAPTICS_I2C_RMI_H
+
+#define SYNAPTICS_I2C_RMI_NAME "synaptics-rmi-ts"
+
+enum {
+	SYNAPTICS_FLIP_X = 1UL << 0,
+	SYNAPTICS_FLIP_Y = 1UL << 1,
+	SYNAPTICS_SWAP_XY = 1UL << 2,
+	SYNAPTICS_SNAP_TO_INACTIVE_EDGE = 1UL << 3,
+};
+
+struct synaptics_i2c_rmi_platform_data {
+	uint32_t version;	/* Use this entry for panels with */
+				/* (major << 8 | minor) version or above. */
+				/* If non-zero another array entry follows */
+	int (*power)(int on);	/* Only valid in first array entry */
+	uint32_t flags;
+	unsigned long irqflags;
+	uint32_t inactive_left; /* 0x10000 = screen width */
+	uint32_t inactive_right; /* 0x10000 = screen width */
+	uint32_t inactive_top; /* 0x10000 = screen height */
+	uint32_t inactive_bottom; /* 0x10000 = screen height */
+	uint32_t snap_left_on; /* 0x10000 = screen width */
+	uint32_t snap_left_off; /* 0x10000 = screen width */
+	uint32_t snap_right_on; /* 0x10000 = screen width */
+	uint32_t snap_right_off; /* 0x10000 = screen width */
+	uint32_t snap_top_on; /* 0x10000 = screen height */
+	uint32_t snap_top_off; /* 0x10000 = screen height */
+	uint32_t snap_bottom_on; /* 0x10000 = screen height */
+	uint32_t snap_bottom_off; /* 0x10000 = screen height */
+	uint32_t fuzz_x; /* 0x10000 = screen width */
+	uint32_t fuzz_y; /* 0x10000 = screen height */
+	int fuzz_p;
+	int fuzz_w;
+	int8_t sensitivity_adjust;
+};
+
+#endif /* _LINUX_SYNAPTICS_I2C_RMI_H */
diff --git a/include/linux/sync.h b/include/linux/sync.h
new file mode 100644
index 00000000..38ea986d
--- /dev/null
+++ b/include/linux/sync.h
@@ -0,0 +1,426 @@
+/*
+ * include/linux/sync.h
+ *
+ * Copyright (C) 2012 Google, Inc.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _LINUX_SYNC_H
+#define _LINUX_SYNC_H
+
+#include <linux/types.h>
+#ifdef __KERNEL__
+
+#include <linux/kref.h>
+#include <linux/ktime.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+
+struct sync_timeline;
+struct sync_pt;
+struct sync_fence;
+
+/**
+ * struct sync_timeline_ops - sync object implementation ops
+ * @driver_name:	name of the implentation
+ * @dup:		duplicate a sync_pt
+ * @has_signaled:	returns:
+ *			  1 if pt has signaled
+ *			  0 if pt has not signaled
+ *			 <0 on error
+ * @compare:		returns:
+ *			  1 if b will signal before a
+ *			  0 if a and b will signal at the same time
+ *			 -1 if a will signabl before b
+ * @free_pt:		called before sync_pt is freed
+ * @release_obj:	called before sync_timeline is freed
+ * @print_obj:		deprecated
+ * @print_pt:		deprecated
+ * @fill_driver_data:	write implmentation specific driver data to data.
+ *			  should return an error if there is not enough room
+ *			  as specified by size.  This information is returned
+ *			  to userspace by SYNC_IOC_FENCE_INFO.
+ * @timeline_value_str: fill str with the value of the sync_timeline's counter
+ * @pt_value_str:	fill str with the value of the sync_pt
+ */
+struct sync_timeline_ops {
+	const char *driver_name;
+
+	/* required */
+	struct sync_pt *(*dup)(struct sync_pt *pt);
+
+	/* required */
+	int (*has_signaled)(struct sync_pt *pt);
+
+	/* required */
+	int (*compare)(struct sync_pt *a, struct sync_pt *b);
+
+	/* optional */
+	void (*free_pt)(struct sync_pt *sync_pt);
+
+	/* optional */
+	void (*release_obj)(struct sync_timeline *sync_timeline);
+
+	/* deprecated */
+	void (*print_obj)(struct seq_file *s,
+			  struct sync_timeline *sync_timeline);
+
+	/* deprecated */
+	void (*print_pt)(struct seq_file *s, struct sync_pt *sync_pt);
+
+	/* optional */
+	int (*fill_driver_data)(struct sync_pt *syncpt, void *data, int size);
+
+	/* optional */
+	void (*timeline_value_str)(struct sync_timeline *timeline, char *str,
+				   int size);
+
+	/* optional */
+	void (*pt_value_str)(struct sync_pt *pt, char *str, int size);
+};
+
+/**
+ * struct sync_timeline - sync object
+ * @kref:		reference count on fence.
+ * @ops:		ops that define the implementaiton of the sync_timeline
+ * @name:		name of the sync_timeline. Useful for debugging
+ * @destoryed:		set when sync_timeline is destroyed
+ * @child_list_head:	list of children sync_pts for this sync_timeline
+ * @child_list_lock:	lock protecting @child_list_head, destroyed, and
+ *			  sync_pt.status
+ * @active_list_head:	list of active (unsignaled/errored) sync_pts
+ * @sync_timeline_list:	membership in global sync_timeline_list
+ */
+struct sync_timeline {
+	struct kref		kref;
+	const struct sync_timeline_ops	*ops;
+	char			name[32];
+
+	/* protected by child_list_lock */
+	bool			destroyed;
+
+	struct list_head	child_list_head;
+	spinlock_t		child_list_lock;
+
+	struct list_head	active_list_head;
+	spinlock_t		active_list_lock;
+
+	struct list_head	sync_timeline_list;
+};
+
+/**
+ * struct sync_pt - sync point
+ * @parent:		sync_timeline to which this sync_pt belongs
+ * @child_list:		membership in sync_timeline.child_list_head
+ * @active_list:	membership in sync_timeline.active_list_head
+ * @signaled_list:	membership in temorary signaled_list on stack
+ * @fence:		sync_fence to which the sync_pt belongs
+ * @pt_list:		membership in sync_fence.pt_list_head
+ * @status:		1: signaled, 0:active, <0: error
+ * @timestamp:		time which sync_pt status transitioned from active to
+ *			  singaled or error.
+ */
+struct sync_pt {
+	struct sync_timeline		*parent;
+	struct list_head	child_list;
+
+	struct list_head	active_list;
+	struct list_head	signaled_list;
+
+	struct sync_fence	*fence;
+	struct list_head	pt_list;
+
+	/* protected by parent->active_list_lock */
+	int			status;
+
+	ktime_t			timestamp;
+};
+
+/**
+ * struct sync_fence - sync fence
+ * @file:		file representing this fence
+ * @kref:		referenace count on fence.
+ * @name:		name of sync_fence.  Useful for debugging
+ * @pt_list_head:	list of sync_pts in ths fence.  immutable once fence
+ *			  is created
+ * @waiter_list_head:	list of asynchronous waiters on this fence
+ * @waiter_list_lock:	lock protecting @waiter_list_head and @status
+ * @status:		1: signaled, 0:active, <0: error
+ *
+ * @wq:			wait queue for fence signaling
+ * @sync_fence_list:	membership in global fence list
+ */
+struct sync_fence {
+	struct file		*file;
+	struct kref		kref;
+	char			name[32];
+
+	/* this list is immutable once the fence is created */
+	struct list_head	pt_list_head;
+
+	struct list_head	waiter_list_head;
+	spinlock_t		waiter_list_lock; /* also protects status */
+	int			status;
+
+	wait_queue_head_t	wq;
+
+	struct list_head	sync_fence_list;
+};
+
+struct sync_fence_waiter;
+typedef void (*sync_callback_t)(struct sync_fence *fence,
+				struct sync_fence_waiter *waiter);
+
+/**
+ * struct sync_fence_waiter - metadata for asynchronous waiter on a fence
+ * @waiter_list:	membership in sync_fence.waiter_list_head
+ * @callback:		function pointer to call when fence signals
+ * @callback_data:	pointer to pass to @callback
+ */
+struct sync_fence_waiter {
+	struct list_head	waiter_list;
+
+	sync_callback_t		callback;
+};
+
+static inline void sync_fence_waiter_init(struct sync_fence_waiter *waiter,
+					  sync_callback_t callback)
+{
+	waiter->callback = callback;
+}
+
+/*
+ * API for sync_timeline implementers
+ */
+
+/**
+ * sync_timeline_create() - creates a sync object
+ * @ops:	specifies the implemention ops for the object
+ * @size:	size to allocate for this obj
+ * @name:	sync_timeline name
+ *
+ * Creates a new sync_timeline which will use the implemetation specified by
+ * @ops.  @size bytes will be allocated allowing for implemntation specific
+ * data to be kept after the generic sync_timeline stuct.
+ */
+struct sync_timeline *sync_timeline_create(const struct sync_timeline_ops *ops,
+					   int size, const char *name);
+
+/**
+ * sync_timeline_destory() - destorys a sync object
+ * @obj:	sync_timeline to destroy
+ *
+ * A sync implemntation should call this when the @obj is going away
+ * (i.e. module unload.)  @obj won't actually be freed until all its childern
+ * sync_pts are freed.
+ */
+void sync_timeline_destroy(struct sync_timeline *obj);
+
+/**
+ * sync_timeline_signal() - signal a status change on a sync_timeline
+ * @obj:	sync_timeline to signal
+ *
+ * A sync implemntation should call this any time one of it's sync_pts
+ * has signaled or has an error condition.
+ */
+void sync_timeline_signal(struct sync_timeline *obj);
+
+/**
+ * sync_pt_create() - creates a sync pt
+ * @parent:	sync_pt's parent sync_timeline
+ * @size:	size to allocate for this pt
+ *
+ * Creates a new sync_pt as a chiled of @parent.  @size bytes will be
+ * allocated allowing for implemntation specific data to be kept after
+ * the generic sync_timeline struct.
+ */
+struct sync_pt *sync_pt_create(struct sync_timeline *parent, int size);
+
+/**
+ * sync_pt_free() - frees a sync pt
+ * @pt:		sync_pt to free
+ *
+ * This should only be called on sync_pts which have been created but
+ * not added to a fence.
+ */
+void sync_pt_free(struct sync_pt *pt);
+
+/**
+ * sync_fence_create() - creates a sync fence
+ * @name:	name of fence to create
+ * @pt:		sync_pt to add to the fence
+ *
+ * Creates a fence containg @pt.  Once this is called, the fence takes
+ * ownership of @pt.
+ */
+struct sync_fence *sync_fence_create(const char *name, struct sync_pt *pt);
+
+/*
+ * API for sync_fence consumers
+ */
+
+/**
+ * sync_fence_merge() - merge two fences
+ * @name:	name of new fence
+ * @a:		fence a
+ * @b:		fence b
+ *
+ * Creates a new fence which contains copies of all the sync_pts in both
+ * @a and @b.  @a and @b remain valid, independent fences.
+ */
+struct sync_fence *sync_fence_merge(const char *name,
+				    struct sync_fence *a, struct sync_fence *b);
+
+/**
+ * sync_fence_fdget() - get a fence from an fd
+ * @fd:		fd referencing a fence
+ *
+ * Ensures @fd references a valid fence, increments the refcount of the backing
+ * file, and returns the fence.
+ */
+struct sync_fence *sync_fence_fdget(int fd);
+
+/**
+ * sync_fence_put() - puts a refernnce of a sync fence
+ * @fence:	fence to put
+ *
+ * Puts a reference on @fence.  If this is the last reference, the fence and
+ * all it's sync_pts will be freed
+ */
+void sync_fence_put(struct sync_fence *fence);
+
+/**
+ * sync_fence_install() - installs a fence into a file descriptor
+ * @fence:	fence to instal
+ * @fd:		file descriptor in which to install the fence
+ *
+ * Installs @fence into @fd.  @fd's should be acquired through get_unused_fd().
+ */
+void sync_fence_install(struct sync_fence *fence, int fd);
+
+/**
+ * sync_fence_wait_async() - registers and async wait on the fence
+ * @fence:		fence to wait on
+ * @waiter:		waiter callback struck
+ *
+ * Returns 1 if @fence has already signaled.
+ *
+ * Registers a callback to be called when @fence signals or has an error.
+ * @waiter should be initialized with sync_fence_waiter_init().
+ */
+int sync_fence_wait_async(struct sync_fence *fence,
+			  struct sync_fence_waiter *waiter);
+
+/**
+ * sync_fence_cancel_async() - cancels an async wait
+ * @fence:		fence to wait on
+ * @waiter:		waiter callback struck
+ *
+ * returns 0 if waiter was removed from fence's async waiter list.
+ * returns -ENOENT if waiter was not found on fence's async waiter list.
+ *
+ * Cancels a previously registered async wait.  Will fail gracefully if
+ * @waiter was never registered or if @fence has already signaled @waiter.
+ */
+int sync_fence_cancel_async(struct sync_fence *fence,
+			    struct sync_fence_waiter *waiter);
+
+/**
+ * sync_fence_wait() - wait on fence
+ * @fence:	fence to wait on
+ * @tiemout:	timeout in ms
+ *
+ * Wait for @fence to be signaled or have an error.  Waits indefinitely
+ * if @timeout < 0
+ */
+int sync_fence_wait(struct sync_fence *fence, long timeout);
+
+#endif /* __KERNEL__ */
+
+/**
+ * struct sync_merge_data - data passed to merge ioctl
+ * @fd2:	file descriptor of second fence
+ * @name:	name of new fence
+ * @fence:	returns the fd of the new fence to userspace
+ */
+struct sync_merge_data {
+	__s32	fd2; /* fd of second fence */
+	char	name[32]; /* name of new fence */
+	__s32	fence; /* fd on newly created fence */
+};
+
+/**
+ * struct sync_pt_info - detailed sync_pt information
+ * @len:		length of sync_pt_info including any driver_data
+ * @obj_name:		name of parent sync_timeline
+ * @driver_name:	name of driver implmenting the parent
+ * @status:		status of the sync_pt 0:active 1:signaled <0:error
+ * @timestamp_ns:	timestamp of status change in nanoseconds
+ * @driver_data:	any driver dependant data
+ */
+struct sync_pt_info {
+	__u32	len;
+	char	obj_name[32];
+	char	driver_name[32];
+	__s32	status;
+	__u64	timestamp_ns;
+
+	__u8	driver_data[0];
+};
+
+/**
+ * struct sync_fence_info_data - data returned from fence info ioctl
+ * @len:	ioctl caller writes the size of the buffer its passing in.
+ *		ioctl returns length of sync_fence_data reutnred to userspace
+ *		including pt_info.
+ * @name:	name of fence
+ * @status:	status of fence. 1: signaled 0:active <0:error
+ * @pt_info:	a sync_pt_info struct for every sync_pt in the fence
+ */
+struct sync_fence_info_data {
+	__u32	len;
+	char	name[32];
+	__s32	status;
+
+	__u8	pt_info[0];
+};
+
+#define SYNC_IOC_MAGIC		'>'
+
+/**
+ * DOC: SYNC_IOC_WAIT - wait for a fence to signal
+ *
+ * pass timeout in milliseconds.  Waits indefinitely timeout < 0.
+ */
+#define SYNC_IOC_WAIT		_IOW(SYNC_IOC_MAGIC, 0, __s32)
+
+/**
+ * DOC: SYNC_IOC_MERGE - merge two fences
+ *
+ * Takes a struct sync_merge_data.  Creates a new fence containing copies of
+ * the sync_pts in both the calling fd and sync_merge_data.fd2.  Returns the
+ * new fence's fd in sync_merge_data.fence
+ */
+#define SYNC_IOC_MERGE		_IOWR(SYNC_IOC_MAGIC, 1, struct sync_merge_data)
+
+/**
+ * DOC: SYNC_IOC_FENCE_INFO - get detailed information on a fence
+ *
+ * Takes a struct sync_fence_info_data with extra space allocated for pt_info.
+ * Caller should write the size of the buffer into len.  On return, len is
+ * updated to reflect the total size of the sync_fence_info_data including
+ * pt_info.
+ *
+ * pt_info is a buffer containing sync_pt_infos for every sync_pt in the fence.
+ * To itterate over the sync_pt_infos, use the sync_pt_info.len field.
+ */
+#define SYNC_IOC_FENCE_INFO	_IOWR(SYNC_IOC_MAGIC, 2,\
+	struct sync_fence_info_data)
+
+#endif /* _LINUX_SYNC_H */
diff --git a/include/linux/synclink.h b/include/linux/synclink.h
new file mode 100644
index 00000000..2e7d81c4
--- /dev/null
+++ b/include/linux/synclink.h
@@ -0,0 +1,323 @@
+/*
+ * SyncLink Multiprotocol Serial Adapter Driver
+ *
+ * $Id: synclink.h,v 3.14 2006/07/17 20:15:43 paulkf Exp $
+ *
+ * Copyright (C) 1998-2000 by Microgate Corporation
+ *
+ * Redistribution of this file is permitted under
+ * the terms of the GNU Public License (GPL)
+ */
+
+#ifndef _SYNCLINK_H_
+#define _SYNCLINK_H_
+#define SYNCLINK_H_VERSION 3.6
+
+#include <linux/types.h>
+
+#define BIT0	0x0001
+#define BIT1	0x0002
+#define BIT2	0x0004
+#define BIT3	0x0008
+#define BIT4	0x0010
+#define BIT5	0x0020
+#define BIT6	0x0040
+#define BIT7	0x0080
+#define BIT8	0x0100
+#define BIT9	0x0200
+#define BIT10	0x0400
+#define BIT11	0x0800
+#define BIT12	0x1000
+#define BIT13	0x2000
+#define BIT14	0x4000
+#define BIT15	0x8000
+#define BIT16	0x00010000
+#define BIT17	0x00020000
+#define BIT18	0x00040000
+#define BIT19	0x00080000
+#define BIT20	0x00100000
+#define BIT21	0x00200000
+#define BIT22	0x00400000
+#define BIT23	0x00800000
+#define BIT24	0x01000000
+#define BIT25	0x02000000
+#define BIT26	0x04000000
+#define BIT27	0x08000000
+#define BIT28	0x10000000
+#define BIT29	0x20000000
+#define BIT30	0x40000000
+#define BIT31	0x80000000
+
+
+#define HDLC_MAX_FRAME_SIZE	65535
+#define MAX_ASYNC_TRANSMIT	4096
+#define MAX_ASYNC_BUFFER_SIZE	4096
+
+#define ASYNC_PARITY_NONE		0
+#define ASYNC_PARITY_EVEN		1
+#define ASYNC_PARITY_ODD		2
+#define ASYNC_PARITY_SPACE		3
+
+#define HDLC_FLAG_UNDERRUN_ABORT7	0x0000
+#define HDLC_FLAG_UNDERRUN_ABORT15	0x0001
+#define HDLC_FLAG_UNDERRUN_FLAG		0x0002
+#define HDLC_FLAG_UNDERRUN_CRC		0x0004
+#define HDLC_FLAG_SHARE_ZERO		0x0010
+#define HDLC_FLAG_AUTO_CTS		0x0020
+#define HDLC_FLAG_AUTO_DCD		0x0040
+#define HDLC_FLAG_AUTO_RTS		0x0080
+#define HDLC_FLAG_RXC_DPLL		0x0100
+#define HDLC_FLAG_RXC_BRG		0x0200
+#define HDLC_FLAG_RXC_TXCPIN		0x8000
+#define HDLC_FLAG_RXC_RXCPIN		0x0000
+#define HDLC_FLAG_TXC_DPLL		0x0400
+#define HDLC_FLAG_TXC_BRG		0x0800
+#define HDLC_FLAG_TXC_TXCPIN		0x0000
+#define HDLC_FLAG_TXC_RXCPIN		0x0008
+#define HDLC_FLAG_DPLL_DIV8		0x1000
+#define HDLC_FLAG_DPLL_DIV16		0x2000
+#define HDLC_FLAG_DPLL_DIV32		0x0000
+#define HDLC_FLAG_HDLC_LOOPMODE		0x4000
+
+#define HDLC_CRC_NONE			0
+#define HDLC_CRC_16_CCITT		1
+#define HDLC_CRC_32_CCITT		2
+#define HDLC_CRC_MASK			0x00ff
+#define HDLC_CRC_RETURN_EX		0x8000
+
+#define RX_OK				0
+#define RX_CRC_ERROR			1
+
+#define HDLC_TXIDLE_FLAGS		0
+#define HDLC_TXIDLE_ALT_ZEROS_ONES	1
+#define HDLC_TXIDLE_ZEROS		2
+#define HDLC_TXIDLE_ONES		3
+#define HDLC_TXIDLE_ALT_MARK_SPACE	4
+#define HDLC_TXIDLE_SPACE		5
+#define HDLC_TXIDLE_MARK		6
+#define HDLC_TXIDLE_CUSTOM_8            0x10000000
+#define HDLC_TXIDLE_CUSTOM_16           0x20000000
+
+#define HDLC_ENCODING_NRZ			0
+#define HDLC_ENCODING_NRZB			1
+#define HDLC_ENCODING_NRZI_MARK			2
+#define HDLC_ENCODING_NRZI_SPACE		3
+#define HDLC_ENCODING_NRZI			HDLC_ENCODING_NRZI_SPACE
+#define HDLC_ENCODING_BIPHASE_MARK		4
+#define HDLC_ENCODING_BIPHASE_SPACE		5
+#define HDLC_ENCODING_BIPHASE_LEVEL		6
+#define HDLC_ENCODING_DIFF_BIPHASE_LEVEL	7
+
+#define HDLC_PREAMBLE_LENGTH_8BITS	0
+#define HDLC_PREAMBLE_LENGTH_16BITS	1
+#define HDLC_PREAMBLE_LENGTH_32BITS	2
+#define HDLC_PREAMBLE_LENGTH_64BITS	3
+
+#define HDLC_PREAMBLE_PATTERN_NONE	0
+#define HDLC_PREAMBLE_PATTERN_ZEROS	1
+#define HDLC_PREAMBLE_PATTERN_FLAGS	2
+#define HDLC_PREAMBLE_PATTERN_10	3
+#define HDLC_PREAMBLE_PATTERN_01	4
+#define HDLC_PREAMBLE_PATTERN_ONES	5
+
+#define MGSL_MODE_ASYNC		1
+#define MGSL_MODE_HDLC		2
+#define MGSL_MODE_MONOSYNC	3
+#define MGSL_MODE_BISYNC	4
+#define MGSL_MODE_RAW		6
+#define MGSL_MODE_BASE_CLOCK    7
+#define MGSL_MODE_XSYNC         8
+
+#define MGSL_BUS_TYPE_ISA	1
+#define MGSL_BUS_TYPE_EISA	2
+#define MGSL_BUS_TYPE_PCI	5
+
+#define MGSL_INTERFACE_MASK     0xf
+#define MGSL_INTERFACE_DISABLE  0
+#define MGSL_INTERFACE_RS232    1
+#define MGSL_INTERFACE_V35      2
+#define MGSL_INTERFACE_RS422    3
+#define MGSL_INTERFACE_RTS_EN   0x10
+#define MGSL_INTERFACE_LL       0x20
+#define MGSL_INTERFACE_RL       0x40
+#define MGSL_INTERFACE_MSB_FIRST 0x80
+
+typedef struct _MGSL_PARAMS
+{
+	/* Common */
+
+	unsigned long	mode;		/* Asynchronous or HDLC */
+	unsigned char	loopback;	/* internal loopback mode */
+
+	/* HDLC Only */
+
+	unsigned short	flags;
+	unsigned char	encoding;	/* NRZ, NRZI, etc. */
+	unsigned long	clock_speed;	/* external clock speed in bits per second */
+	unsigned char	addr_filter;	/* receive HDLC address filter, 0xFF = disable */
+	unsigned short	crc_type;	/* None, CRC16-CCITT, or CRC32-CCITT */
+	unsigned char	preamble_length;
+	unsigned char	preamble;
+
+	/* Async Only */
+
+	unsigned long	data_rate;	/* bits per second */
+	unsigned char	data_bits;	/* 7 or 8 data bits */
+	unsigned char	stop_bits;	/* 1 or 2 stop bits */
+	unsigned char	parity;		/* none, even, or odd */
+
+} MGSL_PARAMS, *PMGSL_PARAMS;
+
+#define MICROGATE_VENDOR_ID 0x13c0
+#define SYNCLINK_DEVICE_ID 0x0010
+#define MGSCC_DEVICE_ID 0x0020
+#define SYNCLINK_SCA_DEVICE_ID 0x0030
+#define SYNCLINK_GT_DEVICE_ID 0x0070
+#define SYNCLINK_GT4_DEVICE_ID 0x0080
+#define SYNCLINK_AC_DEVICE_ID  0x0090
+#define SYNCLINK_GT2_DEVICE_ID 0x00A0
+#define MGSL_MAX_SERIAL_NUMBER 30
+
+/*
+** device diagnostics status
+*/
+
+#define DiagStatus_OK				0
+#define DiagStatus_AddressFailure		1
+#define DiagStatus_AddressConflict		2
+#define DiagStatus_IrqFailure			3
+#define DiagStatus_IrqConflict			4
+#define DiagStatus_DmaFailure			5
+#define DiagStatus_DmaConflict			6
+#define DiagStatus_PciAdapterNotFound		7
+#define DiagStatus_CantAssignPciResources	8
+#define DiagStatus_CantAssignPciMemAddr		9
+#define DiagStatus_CantAssignPciIoAddr		10
+#define DiagStatus_CantAssignPciIrq		11
+#define DiagStatus_MemoryError			12
+
+#define SerialSignal_DCD            0x01     /* Data Carrier Detect */
+#define SerialSignal_TXD            0x02     /* Transmit Data */
+#define SerialSignal_RI             0x04     /* Ring Indicator */
+#define SerialSignal_RXD            0x08     /* Receive Data */
+#define SerialSignal_CTS            0x10     /* Clear to Send */
+#define SerialSignal_RTS            0x20     /* Request to Send */
+#define SerialSignal_DSR            0x40     /* Data Set Ready */
+#define SerialSignal_DTR            0x80     /* Data Terminal Ready */
+
+
+/*
+ * Counters of the input lines (CTS, DSR, RI, CD) interrupts
+ */
+struct mgsl_icount {
+	__u32	cts, dsr, rng, dcd, tx, rx;
+	__u32	frame, parity, overrun, brk;
+	__u32	buf_overrun;
+	__u32	txok;
+	__u32	txunder;
+	__u32	txabort;
+	__u32	txtimeout;
+	__u32	rxshort;
+	__u32	rxlong;
+	__u32	rxabort;
+	__u32	rxover;
+	__u32	rxcrc;
+	__u32	rxok;
+	__u32	exithunt;
+	__u32	rxidle;
+};
+
+struct gpio_desc {
+	__u32 state;
+	__u32 smask;
+	__u32 dir;
+	__u32 dmask;
+};
+
+#define DEBUG_LEVEL_DATA	1
+#define DEBUG_LEVEL_ERROR 	2
+#define DEBUG_LEVEL_INFO  	3
+#define DEBUG_LEVEL_BH    	4
+#define DEBUG_LEVEL_ISR		5
+
+/*
+** Event bit flags for use with MgslWaitEvent
+*/
+
+#define MgslEvent_DsrActive	0x0001
+#define MgslEvent_DsrInactive	0x0002
+#define MgslEvent_Dsr		0x0003
+#define MgslEvent_CtsActive	0x0004
+#define MgslEvent_CtsInactive	0x0008
+#define MgslEvent_Cts		0x000c
+#define MgslEvent_DcdActive	0x0010
+#define MgslEvent_DcdInactive	0x0020
+#define MgslEvent_Dcd		0x0030
+#define MgslEvent_RiActive	0x0040
+#define MgslEvent_RiInactive	0x0080
+#define MgslEvent_Ri		0x00c0
+#define MgslEvent_ExitHuntMode	0x0100
+#define MgslEvent_IdleReceived	0x0200
+
+/* Private IOCTL codes:
+ *
+ * MGSL_IOCSPARAMS	set MGSL_PARAMS structure values
+ * MGSL_IOCGPARAMS	get current MGSL_PARAMS structure values
+ * MGSL_IOCSTXIDLE	set current transmit idle mode
+ * MGSL_IOCGTXIDLE	get current transmit idle mode
+ * MGSL_IOCTXENABLE	enable or disable transmitter
+ * MGSL_IOCRXENABLE	enable or disable receiver
+ * MGSL_IOCTXABORT	abort transmitting frame (HDLC)
+ * MGSL_IOCGSTATS	return current statistics
+ * MGSL_IOCWAITEVENT	wait for specified event to occur
+ * MGSL_LOOPTXDONE	transmit in HDLC LoopMode done
+ * MGSL_IOCSIF          set the serial interface type
+ * MGSL_IOCGIF          get the serial interface type
+ */
+#define MGSL_MAGIC_IOC	'm'
+#define MGSL_IOCSPARAMS		_IOW(MGSL_MAGIC_IOC,0,struct _MGSL_PARAMS)
+#define MGSL_IOCGPARAMS		_IOR(MGSL_MAGIC_IOC,1,struct _MGSL_PARAMS)
+#define MGSL_IOCSTXIDLE		_IO(MGSL_MAGIC_IOC,2)
+#define MGSL_IOCGTXIDLE		_IO(MGSL_MAGIC_IOC,3)
+#define MGSL_IOCTXENABLE	_IO(MGSL_MAGIC_IOC,4)
+#define MGSL_IOCRXENABLE	_IO(MGSL_MAGIC_IOC,5)
+#define MGSL_IOCTXABORT		_IO(MGSL_MAGIC_IOC,6)
+#define MGSL_IOCGSTATS		_IO(MGSL_MAGIC_IOC,7)
+#define MGSL_IOCWAITEVENT	_IOWR(MGSL_MAGIC_IOC,8,int)
+#define MGSL_IOCCLRMODCOUNT	_IO(MGSL_MAGIC_IOC,15)
+#define MGSL_IOCLOOPTXDONE	_IO(MGSL_MAGIC_IOC,9)
+#define MGSL_IOCSIF		_IO(MGSL_MAGIC_IOC,10)
+#define MGSL_IOCGIF		_IO(MGSL_MAGIC_IOC,11)
+#define MGSL_IOCSGPIO		_IOW(MGSL_MAGIC_IOC,16,struct gpio_desc)
+#define MGSL_IOCGGPIO		_IOR(MGSL_MAGIC_IOC,17,struct gpio_desc)
+#define MGSL_IOCWAITGPIO	_IOWR(MGSL_MAGIC_IOC,18,struct gpio_desc)
+#define MGSL_IOCSXSYNC		_IO(MGSL_MAGIC_IOC, 19)
+#define MGSL_IOCGXSYNC		_IO(MGSL_MAGIC_IOC, 20)
+#define MGSL_IOCSXCTRL		_IO(MGSL_MAGIC_IOC, 21)
+#define MGSL_IOCGXCTRL		_IO(MGSL_MAGIC_IOC, 22)
+
+#ifdef __KERNEL__
+/* provide 32 bit ioctl compatibility on 64 bit systems */
+#ifdef CONFIG_COMPAT
+#include <linux/compat.h>
+struct MGSL_PARAMS32 {
+	compat_ulong_t	mode;
+	unsigned char	loopback;
+	unsigned short	flags;
+	unsigned char	encoding;
+	compat_ulong_t	clock_speed;
+	unsigned char	addr_filter;
+	unsigned short	crc_type;
+	unsigned char	preamble_length;
+	unsigned char	preamble;
+	compat_ulong_t	data_rate;
+	unsigned char	data_bits;
+	unsigned char	stop_bits;
+	unsigned char	parity;
+};
+#define MGSL_IOCSPARAMS32 _IOW(MGSL_MAGIC_IOC,0,struct MGSL_PARAMS32)
+#define MGSL_IOCGPARAMS32 _IOR(MGSL_MAGIC_IOC,1,struct MGSL_PARAMS32)
+#endif
+#endif
+
+#endif /* _SYNCLINK_H_ */
diff --git a/include/linux/sys.h b/include/linux/sys.h
new file mode 100644
index 00000000..daa6008b
--- /dev/null
+++ b/include/linux/sys.h
@@ -0,0 +1,29 @@
+#ifndef _LINUX_SYS_H
+#define _LINUX_SYS_H
+
+/*
+ * This file is no longer used or needed
+ */
+
+/*
+ * These are system calls that will be removed at some time
+ * due to newer versions existing..
+ * (please be careful - ibcs2 may need some of these).
+ */
+#ifdef notdef
+#define _sys_waitpid	_sys_old_syscall	/* _sys_wait4 */
+#define _sys_olduname	_sys_old_syscall	/* _sys_newuname */
+#define _sys_uname	_sys_old_syscall	/* _sys_newuname */
+#define _sys_stat	_sys_old_syscall	/* _sys_newstat */
+#define _sys_fstat	_sys_old_syscall	/* _sys_newfstat */
+#define _sys_lstat	_sys_old_syscall	/* _sys_newlstat */
+#define _sys_signal	_sys_old_syscall	/* _sys_sigaction */
+#define _sys_sgetmask	_sys_old_syscall	/* _sys_sigprocmask */
+#define _sys_ssetmask	_sys_old_syscall	/* _sys_sigprocmask */
+#endif
+
+/*
+ * These are system calls that haven't been implemented yet
+ * but have an entry in the table for future expansion..
+ */
+#endif
diff --git a/include/linux/sys_soc.h b/include/linux/sys_soc.h
new file mode 100644
index 00000000..2739ccb6
--- /dev/null
+++ b/include/linux/sys_soc.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ * Author: Lee Jones <lee.jones@linaro.org> for ST-Ericsson.
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+#ifndef __SOC_BUS_H
+#define __SOC_BUS_H
+
+#include <linux/device.h>
+
+struct soc_device_attribute {
+	const char *machine;
+	const char *family;
+	const char *revision;
+	const char *soc_id;
+};
+
+/**
+ * soc_device_register - register SoC as a device
+ * @soc_plat_dev_attr: Attributes passed from platform to be attributed to a SoC
+ */
+struct soc_device *soc_device_register(
+	struct soc_device_attribute *soc_plat_dev_attr);
+
+/**
+ * soc_device_unregister - unregister SoC device
+ * @dev: SoC device to be unregistered
+ */
+void soc_device_unregister(struct soc_device *soc_dev);
+
+/**
+ * soc_device_to_device - helper function to fetch struct device
+ * @soc: Previously registered SoC device container
+ */
+struct device *soc_device_to_device(struct soc_device *soc);
+
+#endif /* __SOC_BUS_H */
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
new file mode 100644
index 00000000..3de3acb8
--- /dev/null
+++ b/include/linux/syscalls.h
@@ -0,0 +1,861 @@
+/*
+ * syscalls.h - Linux syscall interfaces (non-arch-specific)
+ *
+ * Copyright (c) 2004 Randy Dunlap
+ * Copyright (c) 2004 Open Source Development Labs
+ *
+ * This file is released under the GPLv2.
+ * See the file COPYING for more details.
+ */
+
+#ifndef _LINUX_SYSCALLS_H
+#define _LINUX_SYSCALLS_H
+
+struct epoll_event;
+struct iattr;
+struct inode;
+struct iocb;
+struct io_event;
+struct iovec;
+struct itimerspec;
+struct itimerval;
+struct kexec_segment;
+struct linux_dirent;
+struct linux_dirent64;
+struct list_head;
+struct mmap_arg_struct;
+struct msgbuf;
+struct msghdr;
+struct mmsghdr;
+struct msqid_ds;
+struct new_utsname;
+struct nfsctl_arg;
+struct __old_kernel_stat;
+struct oldold_utsname;
+struct old_utsname;
+struct pollfd;
+struct rlimit;
+struct rlimit64;
+struct rusage;
+struct sched_param;
+struct sel_arg_struct;
+struct semaphore;
+struct sembuf;
+struct shmid_ds;
+struct sockaddr;
+struct stat;
+struct stat64;
+struct statfs;
+struct statfs64;
+struct __sysctl_args;
+struct sysinfo;
+struct timespec;
+struct timeval;
+struct timex;
+struct timezone;
+struct tms;
+struct utimbuf;
+struct mq_attr;
+struct compat_stat;
+struct compat_timeval;
+struct robust_list_head;
+struct getcpu_cache;
+struct old_linux_dirent;
+struct perf_event_attr;
+struct file_handle;
+
+#include <linux/types.h>
+#include <linux/aio_abi.h>
+#include <linux/capability.h>
+#include <linux/list.h>
+#include <linux/bug.h>
+#include <linux/sem.h>
+#include <asm/siginfo.h>
+#include <asm/signal.h>
+#include <linux/unistd.h>
+#include <linux/quota.h>
+#include <linux/key.h>
+#include <trace/syscall.h>
+
+#define __SC_DECL1(t1, a1)	t1 a1
+#define __SC_DECL2(t2, a2, ...) t2 a2, __SC_DECL1(__VA_ARGS__)
+#define __SC_DECL3(t3, a3, ...) t3 a3, __SC_DECL2(__VA_ARGS__)
+#define __SC_DECL4(t4, a4, ...) t4 a4, __SC_DECL3(__VA_ARGS__)
+#define __SC_DECL5(t5, a5, ...) t5 a5, __SC_DECL4(__VA_ARGS__)
+#define __SC_DECL6(t6, a6, ...) t6 a6, __SC_DECL5(__VA_ARGS__)
+
+#define __SC_LONG1(t1, a1) 	long a1
+#define __SC_LONG2(t2, a2, ...) long a2, __SC_LONG1(__VA_ARGS__)
+#define __SC_LONG3(t3, a3, ...) long a3, __SC_LONG2(__VA_ARGS__)
+#define __SC_LONG4(t4, a4, ...) long a4, __SC_LONG3(__VA_ARGS__)
+#define __SC_LONG5(t5, a5, ...) long a5, __SC_LONG4(__VA_ARGS__)
+#define __SC_LONG6(t6, a6, ...) long a6, __SC_LONG5(__VA_ARGS__)
+
+#define __SC_CAST1(t1, a1)	(t1) a1
+#define __SC_CAST2(t2, a2, ...) (t2) a2, __SC_CAST1(__VA_ARGS__)
+#define __SC_CAST3(t3, a3, ...) (t3) a3, __SC_CAST2(__VA_ARGS__)
+#define __SC_CAST4(t4, a4, ...) (t4) a4, __SC_CAST3(__VA_ARGS__)
+#define __SC_CAST5(t5, a5, ...) (t5) a5, __SC_CAST4(__VA_ARGS__)
+#define __SC_CAST6(t6, a6, ...) (t6) a6, __SC_CAST5(__VA_ARGS__)
+
+#define __SC_TEST(type)		BUILD_BUG_ON(sizeof(type) > sizeof(long))
+#define __SC_TEST1(t1, a1)	__SC_TEST(t1)
+#define __SC_TEST2(t2, a2, ...)	__SC_TEST(t2); __SC_TEST1(__VA_ARGS__)
+#define __SC_TEST3(t3, a3, ...)	__SC_TEST(t3); __SC_TEST2(__VA_ARGS__)
+#define __SC_TEST4(t4, a4, ...)	__SC_TEST(t4); __SC_TEST3(__VA_ARGS__)
+#define __SC_TEST5(t5, a5, ...)	__SC_TEST(t5); __SC_TEST4(__VA_ARGS__)
+#define __SC_TEST6(t6, a6, ...)	__SC_TEST(t6); __SC_TEST5(__VA_ARGS__)
+
+#ifdef CONFIG_FTRACE_SYSCALLS
+#define __SC_STR_ADECL1(t, a)		#a
+#define __SC_STR_ADECL2(t, a, ...)	#a, __SC_STR_ADECL1(__VA_ARGS__)
+#define __SC_STR_ADECL3(t, a, ...)	#a, __SC_STR_ADECL2(__VA_ARGS__)
+#define __SC_STR_ADECL4(t, a, ...)	#a, __SC_STR_ADECL3(__VA_ARGS__)
+#define __SC_STR_ADECL5(t, a, ...)	#a, __SC_STR_ADECL4(__VA_ARGS__)
+#define __SC_STR_ADECL6(t, a, ...)	#a, __SC_STR_ADECL5(__VA_ARGS__)
+
+#define __SC_STR_TDECL1(t, a)		#t
+#define __SC_STR_TDECL2(t, a, ...)	#t, __SC_STR_TDECL1(__VA_ARGS__)
+#define __SC_STR_TDECL3(t, a, ...)	#t, __SC_STR_TDECL2(__VA_ARGS__)
+#define __SC_STR_TDECL4(t, a, ...)	#t, __SC_STR_TDECL3(__VA_ARGS__)
+#define __SC_STR_TDECL5(t, a, ...)	#t, __SC_STR_TDECL4(__VA_ARGS__)
+#define __SC_STR_TDECL6(t, a, ...)	#t, __SC_STR_TDECL5(__VA_ARGS__)
+
+extern struct ftrace_event_class event_class_syscall_enter;
+extern struct ftrace_event_class event_class_syscall_exit;
+extern struct trace_event_functions enter_syscall_print_funcs;
+extern struct trace_event_functions exit_syscall_print_funcs;
+
+#define SYSCALL_TRACE_ENTER_EVENT(sname)				\
+	static struct syscall_metadata __syscall_meta_##sname;		\
+	static struct ftrace_event_call __used				\
+	  event_enter_##sname = {					\
+		.name                   = "sys_enter"#sname,		\
+		.class			= &event_class_syscall_enter,	\
+		.event.funcs            = &enter_syscall_print_funcs,	\
+		.data			= (void *)&__syscall_meta_##sname,\
+		.flags			= TRACE_EVENT_FL_CAP_ANY,	\
+	};								\
+	static struct ftrace_event_call __used				\
+	  __attribute__((section("_ftrace_events")))			\
+	 *__event_enter_##sname = &event_enter_##sname;
+
+#define SYSCALL_TRACE_EXIT_EVENT(sname)					\
+	static struct syscall_metadata __syscall_meta_##sname;		\
+	static struct ftrace_event_call __used				\
+	  event_exit_##sname = {					\
+		.name                   = "sys_exit"#sname,		\
+		.class			= &event_class_syscall_exit,	\
+		.event.funcs		= &exit_syscall_print_funcs,	\
+		.data			= (void *)&__syscall_meta_##sname,\
+		.flags			= TRACE_EVENT_FL_CAP_ANY,	\
+	};								\
+	static struct ftrace_event_call __used				\
+	  __attribute__((section("_ftrace_events")))			\
+	*__event_exit_##sname = &event_exit_##sname;
+
+#define SYSCALL_METADATA(sname, nb)				\
+	SYSCALL_TRACE_ENTER_EVENT(sname);			\
+	SYSCALL_TRACE_EXIT_EVENT(sname);			\
+	static struct syscall_metadata __used			\
+	  __syscall_meta_##sname = {				\
+		.name 		= "sys"#sname,			\
+		.syscall_nr	= -1,	/* Filled in at boot */	\
+		.nb_args 	= nb,				\
+		.types		= types_##sname,		\
+		.args		= args_##sname,			\
+		.enter_event	= &event_enter_##sname,		\
+		.exit_event	= &event_exit_##sname,		\
+		.enter_fields	= LIST_HEAD_INIT(__syscall_meta_##sname.enter_fields), \
+	};							\
+	static struct syscall_metadata __used			\
+	  __attribute__((section("__syscalls_metadata")))	\
+	 *__p_syscall_meta_##sname = &__syscall_meta_##sname;
+
+#define SYSCALL_DEFINE0(sname)					\
+	SYSCALL_TRACE_ENTER_EVENT(_##sname);			\
+	SYSCALL_TRACE_EXIT_EVENT(_##sname);			\
+	static struct syscall_metadata __used			\
+	  __syscall_meta__##sname = {				\
+		.name 		= "sys_"#sname,			\
+		.syscall_nr	= -1,	/* Filled in at boot */	\
+		.nb_args 	= 0,				\
+		.enter_event	= &event_enter__##sname,	\
+		.exit_event	= &event_exit__##sname,		\
+		.enter_fields	= LIST_HEAD_INIT(__syscall_meta__##sname.enter_fields), \
+	};							\
+	static struct syscall_metadata __used			\
+	  __attribute__((section("__syscalls_metadata")))	\
+	 *__p_syscall_meta_##sname = &__syscall_meta__##sname;	\
+	asmlinkage long sys_##sname(void)
+#else
+#define SYSCALL_DEFINE0(name)	   asmlinkage long sys_##name(void)
+#endif
+
+#define SYSCALL_DEFINE1(name, ...) SYSCALL_DEFINEx(1, _##name, __VA_ARGS__)
+#define SYSCALL_DEFINE2(name, ...) SYSCALL_DEFINEx(2, _##name, __VA_ARGS__)
+#define SYSCALL_DEFINE3(name, ...) SYSCALL_DEFINEx(3, _##name, __VA_ARGS__)
+#define SYSCALL_DEFINE4(name, ...) SYSCALL_DEFINEx(4, _##name, __VA_ARGS__)
+#define SYSCALL_DEFINE5(name, ...) SYSCALL_DEFINEx(5, _##name, __VA_ARGS__)
+#define SYSCALL_DEFINE6(name, ...) SYSCALL_DEFINEx(6, _##name, __VA_ARGS__)
+
+#ifdef CONFIG_PPC64
+#define SYSCALL_ALIAS(alias, name)					\
+	asm ("\t.globl " #alias "\n\t.set " #alias ", " #name "\n"	\
+	     "\t.globl ." #alias "\n\t.set ." #alias ", ." #name)
+#else
+#if defined(CONFIG_ALPHA) || defined(CONFIG_MIPS)
+#define SYSCALL_ALIAS(alias, name)					\
+	asm ( #alias " = " #name "\n\t.globl " #alias)
+#else
+#define SYSCALL_ALIAS(alias, name)					\
+	asm ("\t.globl " #alias "\n\t.set " #alias ", " #name)
+#endif
+#endif
+
+#ifdef CONFIG_FTRACE_SYSCALLS
+#define SYSCALL_DEFINEx(x, sname, ...)				\
+	static const char *types_##sname[] = {			\
+		__SC_STR_TDECL##x(__VA_ARGS__)			\
+	};							\
+	static const char *args_##sname[] = {			\
+		__SC_STR_ADECL##x(__VA_ARGS__)			\
+	};							\
+	SYSCALL_METADATA(sname, x);				\
+	__SYSCALL_DEFINEx(x, sname, __VA_ARGS__)
+#else
+#define SYSCALL_DEFINEx(x, sname, ...)				\
+	__SYSCALL_DEFINEx(x, sname, __VA_ARGS__)
+#endif
+
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+
+#define SYSCALL_DEFINE(name) static inline long SYSC_##name
+
+#define __SYSCALL_DEFINEx(x, name, ...)					\
+	asmlinkage long sys##name(__SC_DECL##x(__VA_ARGS__));		\
+	static inline long SYSC##name(__SC_DECL##x(__VA_ARGS__));	\
+	asmlinkage long SyS##name(__SC_LONG##x(__VA_ARGS__))		\
+	{								\
+		__SC_TEST##x(__VA_ARGS__);				\
+		return (long) SYSC##name(__SC_CAST##x(__VA_ARGS__));	\
+	}								\
+	SYSCALL_ALIAS(sys##name, SyS##name);				\
+	static inline long SYSC##name(__SC_DECL##x(__VA_ARGS__))
+
+#else /* CONFIG_HAVE_SYSCALL_WRAPPERS */
+
+#define SYSCALL_DEFINE(name) asmlinkage long sys_##name
+#define __SYSCALL_DEFINEx(x, name, ...)					\
+	asmlinkage long sys##name(__SC_DECL##x(__VA_ARGS__))
+
+#endif /* CONFIG_HAVE_SYSCALL_WRAPPERS */
+
+asmlinkage long sys_time(time_t __user *tloc);
+asmlinkage long sys_stime(time_t __user *tptr);
+asmlinkage long sys_gettimeofday(struct timeval __user *tv,
+				struct timezone __user *tz);
+asmlinkage long sys_settimeofday(struct timeval __user *tv,
+				struct timezone __user *tz);
+asmlinkage long sys_adjtimex(struct timex __user *txc_p);
+
+asmlinkage long sys_times(struct tms __user *tbuf);
+
+asmlinkage long sys_gettid(void);
+asmlinkage long sys_nanosleep(struct timespec __user *rqtp, struct timespec __user *rmtp);
+asmlinkage long sys_alarm(unsigned int seconds);
+asmlinkage long sys_getpid(void);
+asmlinkage long sys_getppid(void);
+asmlinkage long sys_getuid(void);
+asmlinkage long sys_geteuid(void);
+asmlinkage long sys_getgid(void);
+asmlinkage long sys_getegid(void);
+asmlinkage long sys_getresuid(uid_t __user *ruid, uid_t __user *euid, uid_t __user *suid);
+asmlinkage long sys_getresgid(gid_t __user *rgid, gid_t __user *egid, gid_t __user *sgid);
+asmlinkage long sys_getpgid(pid_t pid);
+asmlinkage long sys_getpgrp(void);
+asmlinkage long sys_getsid(pid_t pid);
+asmlinkage long sys_getgroups(int gidsetsize, gid_t __user *grouplist);
+
+asmlinkage long sys_setregid(gid_t rgid, gid_t egid);
+asmlinkage long sys_setgid(gid_t gid);
+asmlinkage long sys_setreuid(uid_t ruid, uid_t euid);
+asmlinkage long sys_setuid(uid_t uid);
+asmlinkage long sys_setresuid(uid_t ruid, uid_t euid, uid_t suid);
+asmlinkage long sys_setresgid(gid_t rgid, gid_t egid, gid_t sgid);
+asmlinkage long sys_setfsuid(uid_t uid);
+asmlinkage long sys_setfsgid(gid_t gid);
+asmlinkage long sys_setpgid(pid_t pid, pid_t pgid);
+asmlinkage long sys_setsid(void);
+asmlinkage long sys_setgroups(int gidsetsize, gid_t __user *grouplist);
+
+asmlinkage long sys_acct(const char __user *name);
+asmlinkage long sys_capget(cap_user_header_t header,
+				cap_user_data_t dataptr);
+asmlinkage long sys_capset(cap_user_header_t header,
+				const cap_user_data_t data);
+asmlinkage long sys_personality(unsigned int personality);
+
+asmlinkage long sys_sigpending(old_sigset_t __user *set);
+asmlinkage long sys_sigprocmask(int how, old_sigset_t __user *set,
+				old_sigset_t __user *oset);
+asmlinkage long sys_getitimer(int which, struct itimerval __user *value);
+asmlinkage long sys_setitimer(int which,
+				struct itimerval __user *value,
+				struct itimerval __user *ovalue);
+asmlinkage long sys_timer_create(clockid_t which_clock,
+				 struct sigevent __user *timer_event_spec,
+				 timer_t __user * created_timer_id);
+asmlinkage long sys_timer_gettime(timer_t timer_id,
+				struct itimerspec __user *setting);
+asmlinkage long sys_timer_getoverrun(timer_t timer_id);
+asmlinkage long sys_timer_settime(timer_t timer_id, int flags,
+				const struct itimerspec __user *new_setting,
+				struct itimerspec __user *old_setting);
+asmlinkage long sys_timer_delete(timer_t timer_id);
+asmlinkage long sys_clock_settime(clockid_t which_clock,
+				const struct timespec __user *tp);
+asmlinkage long sys_clock_gettime(clockid_t which_clock,
+				struct timespec __user *tp);
+asmlinkage long sys_clock_adjtime(clockid_t which_clock,
+				struct timex __user *tx);
+asmlinkage long sys_clock_getres(clockid_t which_clock,
+				struct timespec __user *tp);
+asmlinkage long sys_clock_nanosleep(clockid_t which_clock, int flags,
+				const struct timespec __user *rqtp,
+				struct timespec __user *rmtp);
+
+asmlinkage long sys_nice(int increment);
+asmlinkage long sys_sched_setscheduler(pid_t pid, int policy,
+					struct sched_param __user *param);
+asmlinkage long sys_sched_setparam(pid_t pid,
+					struct sched_param __user *param);
+asmlinkage long sys_sched_getscheduler(pid_t pid);
+asmlinkage long sys_sched_getparam(pid_t pid,
+					struct sched_param __user *param);
+asmlinkage long sys_sched_setaffinity(pid_t pid, unsigned int len,
+					unsigned long __user *user_mask_ptr);
+asmlinkage long sys_sched_getaffinity(pid_t pid, unsigned int len,
+					unsigned long __user *user_mask_ptr);
+asmlinkage long sys_sched_yield(void);
+asmlinkage long sys_sched_get_priority_max(int policy);
+asmlinkage long sys_sched_get_priority_min(int policy);
+asmlinkage long sys_sched_rr_get_interval(pid_t pid,
+					struct timespec __user *interval);
+asmlinkage long sys_setpriority(int which, int who, int niceval);
+asmlinkage long sys_getpriority(int which, int who);
+
+asmlinkage long sys_shutdown(int, int);
+asmlinkage long sys_reboot(int magic1, int magic2, unsigned int cmd,
+				void __user *arg);
+asmlinkage long sys_restart_syscall(void);
+asmlinkage long sys_kexec_load(unsigned long entry, unsigned long nr_segments,
+				struct kexec_segment __user *segments,
+				unsigned long flags);
+
+asmlinkage long sys_exit(int error_code);
+asmlinkage long sys_exit_group(int error_code);
+asmlinkage long sys_wait4(pid_t pid, int __user *stat_addr,
+				int options, struct rusage __user *ru);
+asmlinkage long sys_waitid(int which, pid_t pid,
+			   struct siginfo __user *infop,
+			   int options, struct rusage __user *ru);
+asmlinkage long sys_waitpid(pid_t pid, int __user *stat_addr, int options);
+asmlinkage long sys_set_tid_address(int __user *tidptr);
+asmlinkage long sys_futex(u32 __user *uaddr, int op, u32 val,
+			struct timespec __user *utime, u32 __user *uaddr2,
+			u32 val3);
+
+asmlinkage long sys_init_module(void __user *umod, unsigned long len,
+				const char __user *uargs);
+asmlinkage long sys_delete_module(const char __user *name_user,
+				unsigned int flags);
+
+asmlinkage long sys_rt_sigprocmask(int how, sigset_t __user *set,
+				sigset_t __user *oset, size_t sigsetsize);
+asmlinkage long sys_rt_sigpending(sigset_t __user *set, size_t sigsetsize);
+asmlinkage long sys_rt_sigtimedwait(const sigset_t __user *uthese,
+				siginfo_t __user *uinfo,
+				const struct timespec __user *uts,
+				size_t sigsetsize);
+asmlinkage long sys_rt_tgsigqueueinfo(pid_t tgid, pid_t  pid, int sig,
+		siginfo_t __user *uinfo);
+asmlinkage long sys_kill(int pid, int sig);
+asmlinkage long sys_tgkill(int tgid, int pid, int sig);
+asmlinkage long sys_tkill(int pid, int sig);
+asmlinkage long sys_rt_sigqueueinfo(int pid, int sig, siginfo_t __user *uinfo);
+asmlinkage long sys_sgetmask(void);
+asmlinkage long sys_ssetmask(int newmask);
+asmlinkage long sys_signal(int sig, __sighandler_t handler);
+asmlinkage long sys_pause(void);
+
+asmlinkage long sys_sync(void);
+asmlinkage long sys_fsync(unsigned int fd);
+asmlinkage long sys_fdatasync(unsigned int fd);
+asmlinkage long sys_bdflush(int func, long data);
+asmlinkage long sys_mount(char __user *dev_name, char __user *dir_name,
+				char __user *type, unsigned long flags,
+				void __user *data);
+asmlinkage long sys_umount(char __user *name, int flags);
+asmlinkage long sys_oldumount(char __user *name);
+asmlinkage long sys_truncate(const char __user *path, long length);
+asmlinkage long sys_ftruncate(unsigned int fd, unsigned long length);
+asmlinkage long sys_stat(const char __user *filename,
+			struct __old_kernel_stat __user *statbuf);
+asmlinkage long sys_statfs(const char __user * path,
+				struct statfs __user *buf);
+asmlinkage long sys_statfs64(const char __user *path, size_t sz,
+				struct statfs64 __user *buf);
+asmlinkage long sys_fstatfs(unsigned int fd, struct statfs __user *buf);
+asmlinkage long sys_fstatfs64(unsigned int fd, size_t sz,
+				struct statfs64 __user *buf);
+asmlinkage long sys_lstat(const char __user *filename,
+			struct __old_kernel_stat __user *statbuf);
+asmlinkage long sys_fstat(unsigned int fd,
+			struct __old_kernel_stat __user *statbuf);
+asmlinkage long sys_newstat(const char __user *filename,
+				struct stat __user *statbuf);
+asmlinkage long sys_newlstat(const char __user *filename,
+				struct stat __user *statbuf);
+asmlinkage long sys_newfstat(unsigned int fd, struct stat __user *statbuf);
+asmlinkage long sys_ustat(unsigned dev, struct ustat __user *ubuf);
+#if BITS_PER_LONG == 32
+asmlinkage long sys_stat64(const char __user *filename,
+				struct stat64 __user *statbuf);
+asmlinkage long sys_fstat64(unsigned long fd, struct stat64 __user *statbuf);
+asmlinkage long sys_lstat64(const char __user *filename,
+				struct stat64 __user *statbuf);
+asmlinkage long sys_truncate64(const char __user *path, loff_t length);
+asmlinkage long sys_ftruncate64(unsigned int fd, loff_t length);
+#endif
+
+asmlinkage long sys_setxattr(const char __user *path, const char __user *name,
+			     const void __user *value, size_t size, int flags);
+asmlinkage long sys_lsetxattr(const char __user *path, const char __user *name,
+			      const void __user *value, size_t size, int flags);
+asmlinkage long sys_fsetxattr(int fd, const char __user *name,
+			      const void __user *value, size_t size, int flags);
+asmlinkage long sys_getxattr(const char __user *path, const char __user *name,
+			     void __user *value, size_t size);
+asmlinkage long sys_lgetxattr(const char __user *path, const char __user *name,
+			      void __user *value, size_t size);
+asmlinkage long sys_fgetxattr(int fd, const char __user *name,
+			      void __user *value, size_t size);
+asmlinkage long sys_listxattr(const char __user *path, char __user *list,
+			      size_t size);
+asmlinkage long sys_llistxattr(const char __user *path, char __user *list,
+			       size_t size);
+asmlinkage long sys_flistxattr(int fd, char __user *list, size_t size);
+asmlinkage long sys_removexattr(const char __user *path,
+				const char __user *name);
+asmlinkage long sys_lremovexattr(const char __user *path,
+				 const char __user *name);
+asmlinkage long sys_fremovexattr(int fd, const char __user *name);
+
+asmlinkage long sys_brk(unsigned long brk);
+asmlinkage long sys_mprotect(unsigned long start, size_t len,
+				unsigned long prot);
+asmlinkage long sys_mremap(unsigned long addr,
+			   unsigned long old_len, unsigned long new_len,
+			   unsigned long flags, unsigned long new_addr);
+asmlinkage long sys_remap_file_pages(unsigned long start, unsigned long size,
+			unsigned long prot, unsigned long pgoff,
+			unsigned long flags);
+asmlinkage long sys_msync(unsigned long start, size_t len, int flags);
+asmlinkage long sys_fadvise64(int fd, loff_t offset, size_t len, int advice);
+asmlinkage long sys_fadvise64_64(int fd, loff_t offset, loff_t len, int advice);
+asmlinkage long sys_munmap(unsigned long addr, size_t len);
+asmlinkage long sys_mlock(unsigned long start, size_t len);
+asmlinkage long sys_munlock(unsigned long start, size_t len);
+asmlinkage long sys_mlockall(int flags);
+asmlinkage long sys_munlockall(void);
+asmlinkage long sys_madvise(unsigned long start, size_t len, int behavior);
+asmlinkage long sys_mincore(unsigned long start, size_t len,
+				unsigned char __user * vec);
+
+asmlinkage long sys_pivot_root(const char __user *new_root,
+				const char __user *put_old);
+asmlinkage long sys_chroot(const char __user *filename);
+asmlinkage long sys_mknod(const char __user *filename, umode_t mode,
+				unsigned dev);
+asmlinkage long sys_link(const char __user *oldname,
+				const char __user *newname);
+asmlinkage long sys_symlink(const char __user *old, const char __user *new);
+asmlinkage long sys_unlink(const char __user *pathname);
+asmlinkage long sys_rename(const char __user *oldname,
+				const char __user *newname);
+asmlinkage long sys_chmod(const char __user *filename, umode_t mode);
+asmlinkage long sys_fchmod(unsigned int fd, umode_t mode);
+
+asmlinkage long sys_fcntl(unsigned int fd, unsigned int cmd, unsigned long arg);
+#if BITS_PER_LONG == 32
+asmlinkage long sys_fcntl64(unsigned int fd,
+				unsigned int cmd, unsigned long arg);
+#endif
+asmlinkage long sys_pipe(int __user *fildes);
+asmlinkage long sys_pipe2(int __user *fildes, int flags);
+asmlinkage long sys_dup(unsigned int fildes);
+asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd);
+asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags);
+asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int on);
+asmlinkage long sys_ioctl(unsigned int fd, unsigned int cmd,
+				unsigned long arg);
+asmlinkage long sys_flock(unsigned int fd, unsigned int cmd);
+asmlinkage long sys_io_setup(unsigned nr_reqs, aio_context_t __user *ctx);
+asmlinkage long sys_io_destroy(aio_context_t ctx);
+asmlinkage long sys_io_getevents(aio_context_t ctx_id,
+				long min_nr,
+				long nr,
+				struct io_event __user *events,
+				struct timespec __user *timeout);
+asmlinkage long sys_io_submit(aio_context_t, long,
+				struct iocb __user * __user *);
+asmlinkage long sys_io_cancel(aio_context_t ctx_id, struct iocb __user *iocb,
+			      struct io_event __user *result);
+asmlinkage long sys_sendfile(int out_fd, int in_fd,
+			     off_t __user *offset, size_t count);
+asmlinkage long sys_sendfile64(int out_fd, int in_fd,
+			       loff_t __user *offset, size_t count);
+asmlinkage long sys_readlink(const char __user *path,
+				char __user *buf, int bufsiz);
+asmlinkage long sys_creat(const char __user *pathname, umode_t mode);
+asmlinkage long sys_open(const char __user *filename,
+				int flags, umode_t mode);
+asmlinkage long sys_close(unsigned int fd);
+asmlinkage long sys_access(const char __user *filename, int mode);
+asmlinkage long sys_vhangup(void);
+asmlinkage long sys_chown(const char __user *filename,
+				uid_t user, gid_t group);
+asmlinkage long sys_lchown(const char __user *filename,
+				uid_t user, gid_t group);
+asmlinkage long sys_fchown(unsigned int fd, uid_t user, gid_t group);
+#ifdef CONFIG_UID16
+asmlinkage long sys_chown16(const char __user *filename,
+				old_uid_t user, old_gid_t group);
+asmlinkage long sys_lchown16(const char __user *filename,
+				old_uid_t user, old_gid_t group);
+asmlinkage long sys_fchown16(unsigned int fd, old_uid_t user, old_gid_t group);
+asmlinkage long sys_setregid16(old_gid_t rgid, old_gid_t egid);
+asmlinkage long sys_setgid16(old_gid_t gid);
+asmlinkage long sys_setreuid16(old_uid_t ruid, old_uid_t euid);
+asmlinkage long sys_setuid16(old_uid_t uid);
+asmlinkage long sys_setresuid16(old_uid_t ruid, old_uid_t euid, old_uid_t suid);
+asmlinkage long sys_getresuid16(old_uid_t __user *ruid,
+				old_uid_t __user *euid, old_uid_t __user *suid);
+asmlinkage long sys_setresgid16(old_gid_t rgid, old_gid_t egid, old_gid_t sgid);
+asmlinkage long sys_getresgid16(old_gid_t __user *rgid,
+				old_gid_t __user *egid, old_gid_t __user *sgid);
+asmlinkage long sys_setfsuid16(old_uid_t uid);
+asmlinkage long sys_setfsgid16(old_gid_t gid);
+asmlinkage long sys_getgroups16(int gidsetsize, old_gid_t __user *grouplist);
+asmlinkage long sys_setgroups16(int gidsetsize, old_gid_t __user *grouplist);
+asmlinkage long sys_getuid16(void);
+asmlinkage long sys_geteuid16(void);
+asmlinkage long sys_getgid16(void);
+asmlinkage long sys_getegid16(void);
+#endif
+
+asmlinkage long sys_utime(char __user *filename,
+				struct utimbuf __user *times);
+asmlinkage long sys_utimes(char __user *filename,
+				struct timeval __user *utimes);
+asmlinkage long sys_lseek(unsigned int fd, off_t offset,
+			  unsigned int origin);
+asmlinkage long sys_llseek(unsigned int fd, unsigned long offset_high,
+			unsigned long offset_low, loff_t __user *result,
+			unsigned int origin);
+asmlinkage long sys_read(unsigned int fd, char __user *buf, size_t count);
+asmlinkage long sys_readahead(int fd, loff_t offset, size_t count);
+asmlinkage long sys_readv(unsigned long fd,
+			  const struct iovec __user *vec,
+			  unsigned long vlen);
+asmlinkage long sys_write(unsigned int fd, const char __user *buf,
+			  size_t count);
+asmlinkage long sys_writev(unsigned long fd,
+			   const struct iovec __user *vec,
+			   unsigned long vlen);
+asmlinkage long sys_pread64(unsigned int fd, char __user *buf,
+			    size_t count, loff_t pos);
+asmlinkage long sys_pwrite64(unsigned int fd, const char __user *buf,
+			     size_t count, loff_t pos);
+asmlinkage long sys_preadv(unsigned long fd, const struct iovec __user *vec,
+			   unsigned long vlen, unsigned long pos_l, unsigned long pos_h);
+asmlinkage long sys_pwritev(unsigned long fd, const struct iovec __user *vec,
+			    unsigned long vlen, unsigned long pos_l, unsigned long pos_h);
+asmlinkage long sys_getcwd(char __user *buf, unsigned long size);
+asmlinkage long sys_mkdir(const char __user *pathname, umode_t mode);
+asmlinkage long sys_chdir(const char __user *filename);
+asmlinkage long sys_fchdir(unsigned int fd);
+asmlinkage long sys_rmdir(const char __user *pathname);
+asmlinkage long sys_lookup_dcookie(u64 cookie64, char __user *buf, size_t len);
+asmlinkage long sys_quotactl(unsigned int cmd, const char __user *special,
+				qid_t id, void __user *addr);
+asmlinkage long sys_getdents(unsigned int fd,
+				struct linux_dirent __user *dirent,
+				unsigned int count);
+asmlinkage long sys_getdents64(unsigned int fd,
+				struct linux_dirent64 __user *dirent,
+				unsigned int count);
+
+asmlinkage long sys_setsockopt(int fd, int level, int optname,
+				char __user *optval, int optlen);
+asmlinkage long sys_getsockopt(int fd, int level, int optname,
+				char __user *optval, int __user *optlen);
+asmlinkage long sys_bind(int, struct sockaddr __user *, int);
+asmlinkage long sys_connect(int, struct sockaddr __user *, int);
+asmlinkage long sys_accept(int, struct sockaddr __user *, int __user *);
+asmlinkage long sys_accept4(int, struct sockaddr __user *, int __user *, int);
+asmlinkage long sys_getsockname(int, struct sockaddr __user *, int __user *);
+asmlinkage long sys_getpeername(int, struct sockaddr __user *, int __user *);
+asmlinkage long sys_send(int, void __user *, size_t, unsigned);
+asmlinkage long sys_sendto(int, void __user *, size_t, unsigned,
+				struct sockaddr __user *, int);
+asmlinkage long sys_sendmsg(int fd, struct msghdr __user *msg, unsigned flags);
+asmlinkage long sys_sendmmsg(int fd, struct mmsghdr __user *msg,
+			     unsigned int vlen, unsigned flags);
+asmlinkage long sys_recv(int, void __user *, size_t, unsigned);
+asmlinkage long sys_recvfrom(int, void __user *, size_t, unsigned,
+				struct sockaddr __user *, int __user *);
+asmlinkage long sys_recvmsg(int fd, struct msghdr __user *msg, unsigned flags);
+asmlinkage long sys_recvmmsg(int fd, struct mmsghdr __user *msg,
+			     unsigned int vlen, unsigned flags,
+			     struct timespec __user *timeout);
+asmlinkage long sys_socket(int, int, int);
+asmlinkage long sys_socketpair(int, int, int, int __user *);
+asmlinkage long sys_socketcall(int call, unsigned long __user *args);
+asmlinkage long sys_listen(int, int);
+asmlinkage long sys_poll(struct pollfd __user *ufds, unsigned int nfds,
+				int timeout);
+asmlinkage long sys_select(int n, fd_set __user *inp, fd_set __user *outp,
+			fd_set __user *exp, struct timeval __user *tvp);
+asmlinkage long sys_old_select(struct sel_arg_struct __user *arg);
+asmlinkage long sys_epoll_create(int size);
+asmlinkage long sys_epoll_create1(int flags);
+asmlinkage long sys_epoll_ctl(int epfd, int op, int fd,
+				struct epoll_event __user *event);
+asmlinkage long sys_epoll_wait(int epfd, struct epoll_event __user *events,
+				int maxevents, int timeout);
+asmlinkage long sys_epoll_pwait(int epfd, struct epoll_event __user *events,
+				int maxevents, int timeout,
+				const sigset_t __user *sigmask,
+				size_t sigsetsize);
+asmlinkage long sys_gethostname(char __user *name, int len);
+asmlinkage long sys_sethostname(char __user *name, int len);
+asmlinkage long sys_setdomainname(char __user *name, int len);
+asmlinkage long sys_newuname(struct new_utsname __user *name);
+asmlinkage long sys_uname(struct old_utsname __user *);
+asmlinkage long sys_olduname(struct oldold_utsname __user *);
+
+asmlinkage long sys_getrlimit(unsigned int resource,
+				struct rlimit __user *rlim);
+#if defined(COMPAT_RLIM_OLD_INFINITY) || !(defined(CONFIG_IA64))
+asmlinkage long sys_old_getrlimit(unsigned int resource, struct rlimit __user *rlim);
+#endif
+asmlinkage long sys_setrlimit(unsigned int resource,
+				struct rlimit __user *rlim);
+asmlinkage long sys_prlimit64(pid_t pid, unsigned int resource,
+				const struct rlimit64 __user *new_rlim,
+				struct rlimit64 __user *old_rlim);
+asmlinkage long sys_getrusage(int who, struct rusage __user *ru);
+asmlinkage long sys_umask(int mask);
+
+asmlinkage long sys_msgget(key_t key, int msgflg);
+asmlinkage long sys_msgsnd(int msqid, struct msgbuf __user *msgp,
+				size_t msgsz, int msgflg);
+asmlinkage long sys_msgrcv(int msqid, struct msgbuf __user *msgp,
+				size_t msgsz, long msgtyp, int msgflg);
+asmlinkage long sys_msgctl(int msqid, int cmd, struct msqid_ds __user *buf);
+
+asmlinkage long sys_semget(key_t key, int nsems, int semflg);
+asmlinkage long sys_semop(int semid, struct sembuf __user *sops,
+				unsigned nsops);
+asmlinkage long sys_semctl(int semid, int semnum, int cmd, union semun arg);
+asmlinkage long sys_semtimedop(int semid, struct sembuf __user *sops,
+				unsigned nsops,
+				const struct timespec __user *timeout);
+asmlinkage long sys_shmat(int shmid, char __user *shmaddr, int shmflg);
+asmlinkage long sys_shmget(key_t key, size_t size, int flag);
+asmlinkage long sys_shmdt(char __user *shmaddr);
+asmlinkage long sys_shmctl(int shmid, int cmd, struct shmid_ds __user *buf);
+asmlinkage long sys_ipc(unsigned int call, int first, unsigned long second,
+		unsigned long third, void __user *ptr, long fifth);
+
+asmlinkage long sys_mq_open(const char __user *name, int oflag, umode_t mode, struct mq_attr __user *attr);
+asmlinkage long sys_mq_unlink(const char __user *name);
+asmlinkage long sys_mq_timedsend(mqd_t mqdes, const char __user *msg_ptr, size_t msg_len, unsigned int msg_prio, const struct timespec __user *abs_timeout);
+asmlinkage long sys_mq_timedreceive(mqd_t mqdes, char __user *msg_ptr, size_t msg_len, unsigned int __user *msg_prio, const struct timespec __user *abs_timeout);
+asmlinkage long sys_mq_notify(mqd_t mqdes, const struct sigevent __user *notification);
+asmlinkage long sys_mq_getsetattr(mqd_t mqdes, const struct mq_attr __user *mqstat, struct mq_attr __user *omqstat);
+
+asmlinkage long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn);
+asmlinkage long sys_pciconfig_read(unsigned long bus, unsigned long dfn,
+				unsigned long off, unsigned long len,
+				void __user *buf);
+asmlinkage long sys_pciconfig_write(unsigned long bus, unsigned long dfn,
+				unsigned long off, unsigned long len,
+				void __user *buf);
+
+asmlinkage long sys_prctl(int option, unsigned long arg2, unsigned long arg3,
+			unsigned long arg4, unsigned long arg5);
+asmlinkage long sys_swapon(const char __user *specialfile, int swap_flags);
+asmlinkage long sys_swapoff(const char __user *specialfile);
+asmlinkage long sys_sysctl(struct __sysctl_args __user *args);
+asmlinkage long sys_sysinfo(struct sysinfo __user *info);
+asmlinkage long sys_sysfs(int option,
+				unsigned long arg1, unsigned long arg2);
+asmlinkage long sys_syslog(int type, char __user *buf, int len);
+asmlinkage long sys_uselib(const char __user *library);
+asmlinkage long sys_ni_syscall(void);
+asmlinkage long sys_ptrace(long request, long pid, unsigned long addr,
+			   unsigned long data);
+
+asmlinkage long sys_add_key(const char __user *_type,
+			    const char __user *_description,
+			    const void __user *_payload,
+			    size_t plen,
+			    key_serial_t destringid);
+
+asmlinkage long sys_request_key(const char __user *_type,
+				const char __user *_description,
+				const char __user *_callout_info,
+				key_serial_t destringid);
+
+asmlinkage long sys_keyctl(int cmd, unsigned long arg2, unsigned long arg3,
+			   unsigned long arg4, unsigned long arg5);
+
+asmlinkage long sys_ioprio_set(int which, int who, int ioprio);
+asmlinkage long sys_ioprio_get(int which, int who);
+asmlinkage long sys_set_mempolicy(int mode, unsigned long __user *nmask,
+				unsigned long maxnode);
+asmlinkage long sys_migrate_pages(pid_t pid, unsigned long maxnode,
+				const unsigned long __user *from,
+				const unsigned long __user *to);
+asmlinkage long sys_move_pages(pid_t pid, unsigned long nr_pages,
+				const void __user * __user *pages,
+				const int __user *nodes,
+				int __user *status,
+				int flags);
+asmlinkage long sys_mbind(unsigned long start, unsigned long len,
+				unsigned long mode,
+				unsigned long __user *nmask,
+				unsigned long maxnode,
+				unsigned flags);
+asmlinkage long sys_get_mempolicy(int __user *policy,
+				unsigned long __user *nmask,
+				unsigned long maxnode,
+				unsigned long addr, unsigned long flags);
+
+asmlinkage long sys_inotify_init(void);
+asmlinkage long sys_inotify_init1(int flags);
+asmlinkage long sys_inotify_add_watch(int fd, const char __user *path,
+					u32 mask);
+asmlinkage long sys_inotify_rm_watch(int fd, __s32 wd);
+
+asmlinkage long sys_spu_run(int fd, __u32 __user *unpc,
+				 __u32 __user *ustatus);
+asmlinkage long sys_spu_create(const char __user *name,
+		unsigned int flags, umode_t mode, int fd);
+
+asmlinkage long sys_mknodat(int dfd, const char __user * filename, umode_t mode,
+			    unsigned dev);
+asmlinkage long sys_mkdirat(int dfd, const char __user * pathname, umode_t mode);
+asmlinkage long sys_unlinkat(int dfd, const char __user * pathname, int flag);
+asmlinkage long sys_symlinkat(const char __user * oldname,
+			      int newdfd, const char __user * newname);
+asmlinkage long sys_linkat(int olddfd, const char __user *oldname,
+			   int newdfd, const char __user *newname, int flags);
+asmlinkage long sys_renameat(int olddfd, const char __user * oldname,
+			     int newdfd, const char __user * newname);
+asmlinkage long sys_futimesat(int dfd, const char __user *filename,
+			      struct timeval __user *utimes);
+asmlinkage long sys_faccessat(int dfd, const char __user *filename, int mode);
+asmlinkage long sys_fchmodat(int dfd, const char __user * filename,
+			     umode_t mode);
+asmlinkage long sys_fchownat(int dfd, const char __user *filename, uid_t user,
+			     gid_t group, int flag);
+asmlinkage long sys_openat(int dfd, const char __user *filename, int flags,
+			   umode_t mode);
+asmlinkage long sys_newfstatat(int dfd, const char __user *filename,
+			       struct stat __user *statbuf, int flag);
+asmlinkage long sys_fstatat64(int dfd, const char __user *filename,
+			       struct stat64 __user *statbuf, int flag);
+asmlinkage long sys_readlinkat(int dfd, const char __user *path, char __user *buf,
+			       int bufsiz);
+asmlinkage long sys_utimensat(int dfd, const char __user *filename,
+				struct timespec __user *utimes, int flags);
+asmlinkage long sys_unshare(unsigned long unshare_flags);
+
+asmlinkage long sys_splice(int fd_in, loff_t __user *off_in,
+			   int fd_out, loff_t __user *off_out,
+			   size_t len, unsigned int flags);
+
+asmlinkage long sys_vmsplice(int fd, const struct iovec __user *iov,
+			     unsigned long nr_segs, unsigned int flags);
+
+asmlinkage long sys_tee(int fdin, int fdout, size_t len, unsigned int flags);
+
+asmlinkage long sys_sync_file_range(int fd, loff_t offset, loff_t nbytes,
+					unsigned int flags);
+asmlinkage long sys_sync_file_range2(int fd, unsigned int flags,
+				     loff_t offset, loff_t nbytes);
+asmlinkage long sys_get_robust_list(int pid,
+				    struct robust_list_head __user * __user *head_ptr,
+				    size_t __user *len_ptr);
+asmlinkage long sys_set_robust_list(struct robust_list_head __user *head,
+				    size_t len);
+asmlinkage long sys_getcpu(unsigned __user *cpu, unsigned __user *node, struct getcpu_cache __user *cache);
+asmlinkage long sys_signalfd(int ufd, sigset_t __user *user_mask, size_t sizemask);
+asmlinkage long sys_signalfd4(int ufd, sigset_t __user *user_mask, size_t sizemask, int flags);
+asmlinkage long sys_timerfd_create(int clockid, int flags);
+asmlinkage long sys_timerfd_settime(int ufd, int flags,
+				    const struct itimerspec __user *utmr,
+				    struct itimerspec __user *otmr);
+asmlinkage long sys_timerfd_gettime(int ufd, struct itimerspec __user *otmr);
+asmlinkage long sys_eventfd(unsigned int count);
+asmlinkage long sys_eventfd2(unsigned int count, int flags);
+asmlinkage long sys_fallocate(int fd, int mode, loff_t offset, loff_t len);
+asmlinkage long sys_old_readdir(unsigned int, struct old_linux_dirent __user *, unsigned int);
+asmlinkage long sys_pselect6(int, fd_set __user *, fd_set __user *,
+			     fd_set __user *, struct timespec __user *,
+			     void __user *);
+asmlinkage long sys_ppoll(struct pollfd __user *, unsigned int,
+			  struct timespec __user *, const sigset_t __user *,
+			  size_t);
+asmlinkage long sys_fanotify_init(unsigned int flags, unsigned int event_f_flags);
+asmlinkage long sys_fanotify_mark(int fanotify_fd, unsigned int flags,
+				  u64 mask, int fd,
+				  const char  __user *pathname);
+asmlinkage long sys_syncfs(int fd);
+
+int kernel_execve(const char *filename, const char *const argv[], const char *const envp[]);
+
+
+asmlinkage long sys_perf_event_open(
+		struct perf_event_attr __user *attr_uptr,
+		pid_t pid, int cpu, int group_fd, unsigned long flags);
+
+asmlinkage long sys_mmap_pgoff(unsigned long addr, unsigned long len,
+			unsigned long prot, unsigned long flags,
+			unsigned long fd, unsigned long pgoff);
+asmlinkage long sys_old_mmap(struct mmap_arg_struct __user *arg);
+asmlinkage long sys_name_to_handle_at(int dfd, const char __user *name,
+				      struct file_handle __user *handle,
+				      int __user *mnt_id, int flag);
+asmlinkage long sys_open_by_handle_at(int mountdirfd,
+				      struct file_handle __user *handle,
+				      int flags);
+asmlinkage long sys_setns(int fd, int nstype);
+asmlinkage long sys_process_vm_readv(pid_t pid,
+				     const struct iovec __user *lvec,
+				     unsigned long liovcnt,
+				     const struct iovec __user *rvec,
+				     unsigned long riovcnt,
+				     unsigned long flags);
+asmlinkage long sys_process_vm_writev(pid_t pid,
+				      const struct iovec __user *lvec,
+				      unsigned long liovcnt,
+				      const struct iovec __user *rvec,
+				      unsigned long riovcnt,
+				      unsigned long flags);
+
+#endif
diff --git a/include/linux/syscore_ops.h b/include/linux/syscore_ops.h
new file mode 100644
index 00000000..27b3b0bc
--- /dev/null
+++ b/include/linux/syscore_ops.h
@@ -0,0 +1,29 @@
+/*
+ *  syscore_ops.h - System core operations.
+ *
+ *  Copyright (C) 2011 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ *
+ *  This file is released under the GPLv2.
+ */
+
+#ifndef _LINUX_SYSCORE_OPS_H
+#define _LINUX_SYSCORE_OPS_H
+
+#include <linux/list.h>
+
+struct syscore_ops {
+	struct list_head node;
+	int (*suspend)(void);
+	void (*resume)(void);
+	void (*shutdown)(void);
+};
+
+extern void register_syscore_ops(struct syscore_ops *ops);
+extern void unregister_syscore_ops(struct syscore_ops *ops);
+#ifdef CONFIG_PM_SLEEP
+extern int syscore_suspend(void);
+extern void syscore_resume(void);
+#endif
+extern void syscore_shutdown(void);
+
+#endif
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
new file mode 100644
index 00000000..c34b4c82
--- /dev/null
+++ b/include/linux/sysctl.h
@@ -0,0 +1,1127 @@
+/*
+ * sysctl.h: General linux system control interface
+ *
+ * Begun 24 March 1995, Stephen Tweedie
+ *
+ ****************************************************************
+ ****************************************************************
+ **
+ **  WARNING:
+ **  The values in this file are exported to user space via 
+ **  the sysctl() binary interface.  Do *NOT* change the
+ **  numbering of any existing values here, and do not change
+ **  any numbers within any one set of values.  If you have to
+ **  redefine an existing interface, use a new number for it.
+ **  The kernel will then return -ENOTDIR to any application using
+ **  the old binary interface.
+ **
+ ****************************************************************
+ ****************************************************************
+ */
+
+#ifndef _LINUX_SYSCTL_H
+#define _LINUX_SYSCTL_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+struct completion;
+
+#define CTL_MAXNAME 10		/* how many path components do we allow in a
+				   call to sysctl?   In other words, what is
+				   the largest acceptable value for the nlen
+				   member of a struct __sysctl_args to have? */
+
+struct __sysctl_args {
+	int __user *name;
+	int nlen;
+	void __user *oldval;
+	size_t __user *oldlenp;
+	void __user *newval;
+	size_t newlen;
+	unsigned long __unused[4];
+};
+
+/* Define sysctl names first */
+
+/* Top-level names: */
+
+enum
+{
+	CTL_KERN=1,		/* General kernel info and control */
+	CTL_VM=2,		/* VM management */
+	CTL_NET=3,		/* Networking */
+	CTL_PROC=4,		/* removal breaks strace(1) compilation */
+	CTL_FS=5,		/* Filesystems */
+	CTL_DEBUG=6,		/* Debugging */
+	CTL_DEV=7,		/* Devices */
+	CTL_BUS=8,		/* Busses */
+	CTL_ABI=9,		/* Binary emulation */
+	CTL_CPU=10,		/* CPU stuff (speed scaling, etc) */
+	CTL_ARLAN=254,		/* arlan wireless driver */
+	CTL_S390DBF=5677,	/* s390 debug */
+	CTL_SUNRPC=7249,	/* sunrpc debug */
+	CTL_PM=9899,		/* frv power management */
+	CTL_FRV=9898,		/* frv specific sysctls */
+};
+
+/* CTL_BUS names: */
+enum
+{
+	CTL_BUS_ISA=1		/* ISA */
+};
+
+/* /proc/sys/fs/inotify/ */
+enum
+{
+	INOTIFY_MAX_USER_INSTANCES=1,	/* max instances per user */
+	INOTIFY_MAX_USER_WATCHES=2,	/* max watches per user */
+	INOTIFY_MAX_QUEUED_EVENTS=3	/* max queued events per instance */
+};
+
+/* CTL_KERN names: */
+enum
+{
+	KERN_OSTYPE=1,		/* string: system version */
+	KERN_OSRELEASE=2,	/* string: system release */
+	KERN_OSREV=3,		/* int: system revision */
+	KERN_VERSION=4,		/* string: compile time info */
+	KERN_SECUREMASK=5,	/* struct: maximum rights mask */
+	KERN_PROF=6,		/* table: profiling information */
+	KERN_NODENAME=7,	/* string: hostname */
+	KERN_DOMAINNAME=8,	/* string: domainname */
+
+	KERN_PANIC=15,		/* int: panic timeout */
+	KERN_REALROOTDEV=16,	/* real root device to mount after initrd */
+
+	KERN_SPARC_REBOOT=21,	/* reboot command on Sparc */
+	KERN_CTLALTDEL=22,	/* int: allow ctl-alt-del to reboot */
+	KERN_PRINTK=23,		/* struct: control printk logging parameters */
+	KERN_NAMETRANS=24,	/* Name translation */
+	KERN_PPC_HTABRECLAIM=25, /* turn htab reclaimation on/off on PPC */
+	KERN_PPC_ZEROPAGED=26,	/* turn idle page zeroing on/off on PPC */
+	KERN_PPC_POWERSAVE_NAP=27, /* use nap mode for power saving */
+	KERN_MODPROBE=28,	/* string: modprobe path */
+	KERN_SG_BIG_BUFF=29,	/* int: sg driver reserved buffer size */
+	KERN_ACCT=30,		/* BSD process accounting parameters */
+	KERN_PPC_L2CR=31,	/* l2cr register on PPC */
+
+	KERN_RTSIGNR=32,	/* Number of rt sigs queued */
+	KERN_RTSIGMAX=33,	/* Max queuable */
+	
+	KERN_SHMMAX=34,         /* long: Maximum shared memory segment */
+	KERN_MSGMAX=35,         /* int: Maximum size of a messege */
+	KERN_MSGMNB=36,         /* int: Maximum message queue size */
+	KERN_MSGPOOL=37,        /* int: Maximum system message pool size */
+	KERN_SYSRQ=38,		/* int: Sysreq enable */
+	KERN_MAX_THREADS=39,	/* int: Maximum nr of threads in the system */
+ 	KERN_RANDOM=40,		/* Random driver */
+ 	KERN_SHMALL=41,		/* int: Maximum size of shared memory */
+ 	KERN_MSGMNI=42,		/* int: msg queue identifiers */
+ 	KERN_SEM=43,		/* struct: sysv semaphore limits */
+ 	KERN_SPARC_STOP_A=44,	/* int: Sparc Stop-A enable */
+ 	KERN_SHMMNI=45,		/* int: shm array identifiers */
+	KERN_OVERFLOWUID=46,	/* int: overflow UID */
+	KERN_OVERFLOWGID=47,	/* int: overflow GID */
+	KERN_SHMPATH=48,	/* string: path to shm fs */
+	KERN_HOTPLUG=49,	/* string: path to uevent helper (deprecated) */
+	KERN_IEEE_EMULATION_WARNINGS=50, /* int: unimplemented ieee instructions */
+	KERN_S390_USER_DEBUG_LOGGING=51,  /* int: dumps of user faults */
+	KERN_CORE_USES_PID=52,		/* int: use core or core.%pid */
+	KERN_TAINTED=53,	/* int: various kernel tainted flags */
+	KERN_CADPID=54,		/* int: PID of the process to notify on CAD */
+	KERN_PIDMAX=55,		/* int: PID # limit */
+  	KERN_CORE_PATTERN=56,	/* string: pattern for core-file names */
+	KERN_PANIC_ON_OOPS=57,  /* int: whether we will panic on an oops */
+	KERN_HPPA_PWRSW=58,	/* int: hppa soft-power enable */
+	KERN_HPPA_UNALIGNED=59,	/* int: hppa unaligned-trap enable */
+	KERN_PRINTK_RATELIMIT=60, /* int: tune printk ratelimiting */
+	KERN_PRINTK_RATELIMIT_BURST=61,	/* int: tune printk ratelimiting */
+	KERN_PTY=62,		/* dir: pty driver */
+	KERN_NGROUPS_MAX=63,	/* int: NGROUPS_MAX */
+	KERN_SPARC_SCONS_PWROFF=64, /* int: serial console power-off halt */
+	KERN_HZ_TIMER=65,	/* int: hz timer on or off */
+	KERN_UNKNOWN_NMI_PANIC=66, /* int: unknown nmi panic flag */
+	KERN_BOOTLOADER_TYPE=67, /* int: boot loader type */
+	KERN_RANDOMIZE=68, /* int: randomize virtual address space */
+	KERN_SETUID_DUMPABLE=69, /* int: behaviour of dumps for setuid core */
+	KERN_SPIN_RETRY=70,	/* int: number of spinlock retries */
+	KERN_ACPI_VIDEO_FLAGS=71, /* int: flags for setting up video after ACPI sleep */
+	KERN_IA64_UNALIGNED=72, /* int: ia64 unaligned userland trap enable */
+	KERN_COMPAT_LOG=73,	/* int: print compat layer  messages */
+	KERN_MAX_LOCK_DEPTH=74, /* int: rtmutex's maximum lock depth */
+	KERN_NMI_WATCHDOG=75, /* int: enable/disable nmi watchdog */
+	KERN_PANIC_ON_NMI=76, /* int: whether we will panic on an unrecovered */
+};
+
+
+
+/* CTL_VM names: */
+enum
+{
+	VM_UNUSED1=1,		/* was: struct: Set vm swapping control */
+	VM_UNUSED2=2,		/* was; int: Linear or sqrt() swapout for hogs */
+	VM_UNUSED3=3,		/* was: struct: Set free page thresholds */
+	VM_UNUSED4=4,		/* Spare */
+	VM_OVERCOMMIT_MEMORY=5,	/* Turn off the virtual memory safety limit */
+	VM_UNUSED5=6,		/* was: struct: Set buffer memory thresholds */
+	VM_UNUSED7=7,		/* was: struct: Set cache memory thresholds */
+	VM_UNUSED8=8,		/* was: struct: Control kswapd behaviour */
+	VM_UNUSED9=9,		/* was: struct: Set page table cache parameters */
+	VM_PAGE_CLUSTER=10,	/* int: set number of pages to swap together */
+	VM_DIRTY_BACKGROUND=11,	/* dirty_background_ratio */
+	VM_DIRTY_RATIO=12,	/* dirty_ratio */
+	VM_DIRTY_WB_CS=13,	/* dirty_writeback_centisecs */
+	VM_DIRTY_EXPIRE_CS=14,	/* dirty_expire_centisecs */
+	VM_NR_PDFLUSH_THREADS=15, /* nr_pdflush_threads */
+	VM_OVERCOMMIT_RATIO=16, /* percent of RAM to allow overcommit in */
+	VM_PAGEBUF=17,		/* struct: Control pagebuf parameters */
+	VM_HUGETLB_PAGES=18,	/* int: Number of available Huge Pages */
+	VM_SWAPPINESS=19,	/* Tendency to steal mapped memory */
+	VM_LOWMEM_RESERVE_RATIO=20,/* reservation ratio for lower memory zones */
+	VM_MIN_FREE_KBYTES=21,	/* Minimum free kilobytes to maintain */
+	VM_MAX_MAP_COUNT=22,	/* int: Maximum number of mmaps/address-space */
+	VM_LAPTOP_MODE=23,	/* vm laptop mode */
+	VM_BLOCK_DUMP=24,	/* block dump mode */
+	VM_HUGETLB_GROUP=25,	/* permitted hugetlb group */
+	VM_VFS_CACHE_PRESSURE=26, /* dcache/icache reclaim pressure */
+	VM_LEGACY_VA_LAYOUT=27, /* legacy/compatibility virtual address space layout */
+	VM_SWAP_TOKEN_TIMEOUT=28, /* default time for token time out */
+	VM_DROP_PAGECACHE=29,	/* int: nuke lots of pagecache */
+	VM_PERCPU_PAGELIST_FRACTION=30,/* int: fraction of pages in each percpu_pagelist */
+	VM_ZONE_RECLAIM_MODE=31, /* reclaim local zone memory before going off node */
+	VM_MIN_UNMAPPED=32,	/* Set min percent of unmapped pages */
+	VM_PANIC_ON_OOM=33,	/* panic at out-of-memory */
+	VM_VDSO_ENABLED=34,	/* map VDSO into new processes? */
+	VM_MIN_SLAB=35,		 /* Percent pages ignored by zone reclaim */
+};
+
+
+/* CTL_NET names: */
+enum
+{
+	NET_CORE=1,
+	NET_ETHER=2,
+	NET_802=3,
+	NET_UNIX=4,
+	NET_IPV4=5,
+	NET_IPX=6,
+	NET_ATALK=7,
+	NET_NETROM=8,
+	NET_AX25=9,
+	NET_BRIDGE=10,
+	NET_ROSE=11,
+	NET_IPV6=12,
+	NET_X25=13,
+	NET_TR=14,
+	NET_DECNET=15,
+	NET_ECONET=16,
+	NET_SCTP=17,
+	NET_LLC=18,
+	NET_NETFILTER=19,
+	NET_DCCP=20,
+	NET_IRDA=412,
+};
+
+/* /proc/sys/kernel/random */
+enum
+{
+	RANDOM_POOLSIZE=1,
+	RANDOM_ENTROPY_COUNT=2,
+	RANDOM_READ_THRESH=3,
+	RANDOM_WRITE_THRESH=4,
+	RANDOM_BOOT_ID=5,
+	RANDOM_UUID=6
+};
+
+/* /proc/sys/kernel/pty */
+enum
+{
+	PTY_MAX=1,
+	PTY_NR=2
+};
+
+/* /proc/sys/bus/isa */
+enum
+{
+	BUS_ISA_MEM_BASE=1,
+	BUS_ISA_PORT_BASE=2,
+	BUS_ISA_PORT_SHIFT=3
+};
+
+/* /proc/sys/net/core */
+enum
+{
+	NET_CORE_WMEM_MAX=1,
+	NET_CORE_RMEM_MAX=2,
+	NET_CORE_WMEM_DEFAULT=3,
+	NET_CORE_RMEM_DEFAULT=4,
+/* was	NET_CORE_DESTROY_DELAY */
+	NET_CORE_MAX_BACKLOG=6,
+	NET_CORE_FASTROUTE=7,
+	NET_CORE_MSG_COST=8,
+	NET_CORE_MSG_BURST=9,
+	NET_CORE_OPTMEM_MAX=10,
+	NET_CORE_HOT_LIST_LENGTH=11,
+	NET_CORE_DIVERT_VERSION=12,
+	NET_CORE_NO_CONG_THRESH=13,
+	NET_CORE_NO_CONG=14,
+	NET_CORE_LO_CONG=15,
+	NET_CORE_MOD_CONG=16,
+	NET_CORE_DEV_WEIGHT=17,
+	NET_CORE_SOMAXCONN=18,
+	NET_CORE_BUDGET=19,
+	NET_CORE_AEVENT_ETIME=20,
+	NET_CORE_AEVENT_RSEQTH=21,
+	NET_CORE_WARNINGS=22,
+};
+
+/* /proc/sys/net/ethernet */
+
+/* /proc/sys/net/802 */
+
+/* /proc/sys/net/unix */
+
+enum
+{
+	NET_UNIX_DESTROY_DELAY=1,
+	NET_UNIX_DELETE_DELAY=2,
+	NET_UNIX_MAX_DGRAM_QLEN=3,
+};
+
+/* /proc/sys/net/netfilter */
+enum
+{
+	NET_NF_CONNTRACK_MAX=1,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT=2,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV=3,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED=4,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT=5,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT=6,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK=7,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT=8,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE=9,
+	NET_NF_CONNTRACK_UDP_TIMEOUT=10,
+	NET_NF_CONNTRACK_UDP_TIMEOUT_STREAM=11,
+	NET_NF_CONNTRACK_ICMP_TIMEOUT=12,
+	NET_NF_CONNTRACK_GENERIC_TIMEOUT=13,
+	NET_NF_CONNTRACK_BUCKETS=14,
+	NET_NF_CONNTRACK_LOG_INVALID=15,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS=16,
+	NET_NF_CONNTRACK_TCP_LOOSE=17,
+	NET_NF_CONNTRACK_TCP_BE_LIBERAL=18,
+	NET_NF_CONNTRACK_TCP_MAX_RETRANS=19,
+	NET_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED=20,
+	NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT=21,
+	NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED=22,
+	NET_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED=23,
+	NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT=24,
+	NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD=25,
+	NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT=26,
+	NET_NF_CONNTRACK_COUNT=27,
+	NET_NF_CONNTRACK_ICMPV6_TIMEOUT=28,
+	NET_NF_CONNTRACK_FRAG6_TIMEOUT=29,
+	NET_NF_CONNTRACK_FRAG6_LOW_THRESH=30,
+	NET_NF_CONNTRACK_FRAG6_HIGH_THRESH=31,
+	NET_NF_CONNTRACK_CHECKSUM=32,
+};
+
+/* /proc/sys/net/ipv4 */
+enum
+{
+	/* v2.0 compatibile variables */
+	NET_IPV4_FORWARD=8,
+	NET_IPV4_DYNADDR=9,
+
+	NET_IPV4_CONF=16,
+	NET_IPV4_NEIGH=17,
+	NET_IPV4_ROUTE=18,
+	NET_IPV4_FIB_HASH=19,
+	NET_IPV4_NETFILTER=20,
+
+	NET_IPV4_TCP_TIMESTAMPS=33,
+	NET_IPV4_TCP_WINDOW_SCALING=34,
+	NET_IPV4_TCP_SACK=35,
+	NET_IPV4_TCP_RETRANS_COLLAPSE=36,
+	NET_IPV4_DEFAULT_TTL=37,
+	NET_IPV4_AUTOCONFIG=38,
+	NET_IPV4_NO_PMTU_DISC=39,
+	NET_IPV4_TCP_SYN_RETRIES=40,
+	NET_IPV4_IPFRAG_HIGH_THRESH=41,
+	NET_IPV4_IPFRAG_LOW_THRESH=42,
+	NET_IPV4_IPFRAG_TIME=43,
+	NET_IPV4_TCP_MAX_KA_PROBES=44,
+	NET_IPV4_TCP_KEEPALIVE_TIME=45,
+	NET_IPV4_TCP_KEEPALIVE_PROBES=46,
+	NET_IPV4_TCP_RETRIES1=47,
+	NET_IPV4_TCP_RETRIES2=48,
+	NET_IPV4_TCP_FIN_TIMEOUT=49,
+	NET_IPV4_IP_MASQ_DEBUG=50,
+	NET_TCP_SYNCOOKIES=51,
+	NET_TCP_STDURG=52,
+	NET_TCP_RFC1337=53,
+	NET_TCP_SYN_TAILDROP=54,
+	NET_TCP_MAX_SYN_BACKLOG=55,
+	NET_IPV4_LOCAL_PORT_RANGE=56,
+	NET_IPV4_ICMP_ECHO_IGNORE_ALL=57,
+	NET_IPV4_ICMP_ECHO_IGNORE_BROADCASTS=58,
+	NET_IPV4_ICMP_SOURCEQUENCH_RATE=59,
+	NET_IPV4_ICMP_DESTUNREACH_RATE=60,
+	NET_IPV4_ICMP_TIMEEXCEED_RATE=61,
+	NET_IPV4_ICMP_PARAMPROB_RATE=62,
+	NET_IPV4_ICMP_ECHOREPLY_RATE=63,
+	NET_IPV4_ICMP_IGNORE_BOGUS_ERROR_RESPONSES=64,
+	NET_IPV4_IGMP_MAX_MEMBERSHIPS=65,
+	NET_TCP_TW_RECYCLE=66,
+	NET_IPV4_ALWAYS_DEFRAG=67,
+	NET_IPV4_TCP_KEEPALIVE_INTVL=68,
+	NET_IPV4_INET_PEER_THRESHOLD=69,
+	NET_IPV4_INET_PEER_MINTTL=70,
+	NET_IPV4_INET_PEER_MAXTTL=71,
+	NET_IPV4_INET_PEER_GC_MINTIME=72,
+	NET_IPV4_INET_PEER_GC_MAXTIME=73,
+	NET_TCP_ORPHAN_RETRIES=74,
+	NET_TCP_ABORT_ON_OVERFLOW=75,
+	NET_TCP_SYNACK_RETRIES=76,
+	NET_TCP_MAX_ORPHANS=77,
+	NET_TCP_MAX_TW_BUCKETS=78,
+	NET_TCP_FACK=79,
+	NET_TCP_REORDERING=80,
+	NET_TCP_ECN=81,
+	NET_TCP_DSACK=82,
+	NET_TCP_MEM=83,
+	NET_TCP_WMEM=84,
+	NET_TCP_RMEM=85,
+	NET_TCP_APP_WIN=86,
+	NET_TCP_ADV_WIN_SCALE=87,
+	NET_IPV4_NONLOCAL_BIND=88,
+	NET_IPV4_ICMP_RATELIMIT=89,
+	NET_IPV4_ICMP_RATEMASK=90,
+	NET_TCP_TW_REUSE=91,
+	NET_TCP_FRTO=92,
+	NET_TCP_LOW_LATENCY=93,
+	NET_IPV4_IPFRAG_SECRET_INTERVAL=94,
+	NET_IPV4_IGMP_MAX_MSF=96,
+	NET_TCP_NO_METRICS_SAVE=97,
+	NET_TCP_DEFAULT_WIN_SCALE=105,
+	NET_TCP_MODERATE_RCVBUF=106,
+	NET_TCP_TSO_WIN_DIVISOR=107,
+	NET_TCP_BIC_BETA=108,
+	NET_IPV4_ICMP_ERRORS_USE_INBOUND_IFADDR=109,
+	NET_TCP_CONG_CONTROL=110,
+	NET_TCP_ABC=111,
+	NET_IPV4_IPFRAG_MAX_DIST=112,
+ 	NET_TCP_MTU_PROBING=113,
+	NET_TCP_BASE_MSS=114,
+	NET_IPV4_TCP_WORKAROUND_SIGNED_WINDOWS=115,
+	NET_TCP_DMA_COPYBREAK=116,
+	NET_TCP_SLOW_START_AFTER_IDLE=117,
+	NET_CIPSOV4_CACHE_ENABLE=118,
+	NET_CIPSOV4_CACHE_BUCKET_SIZE=119,
+	NET_CIPSOV4_RBM_OPTFMT=120,
+	NET_CIPSOV4_RBM_STRICTVALID=121,
+	NET_TCP_AVAIL_CONG_CONTROL=122,
+	NET_TCP_ALLOWED_CONG_CONTROL=123,
+	NET_TCP_MAX_SSTHRESH=124,
+	NET_TCP_FRTO_RESPONSE=125,
+};
+
+enum {
+	NET_IPV4_ROUTE_FLUSH=1,
+	NET_IPV4_ROUTE_MIN_DELAY=2, /* obsolete since 2.6.25 */
+	NET_IPV4_ROUTE_MAX_DELAY=3, /* obsolete since 2.6.25 */
+	NET_IPV4_ROUTE_GC_THRESH=4,
+	NET_IPV4_ROUTE_MAX_SIZE=5,
+	NET_IPV4_ROUTE_GC_MIN_INTERVAL=6,
+	NET_IPV4_ROUTE_GC_TIMEOUT=7,
+	NET_IPV4_ROUTE_GC_INTERVAL=8, /* obsolete since 2.6.38 */
+	NET_IPV4_ROUTE_REDIRECT_LOAD=9,
+	NET_IPV4_ROUTE_REDIRECT_NUMBER=10,
+	NET_IPV4_ROUTE_REDIRECT_SILENCE=11,
+	NET_IPV4_ROUTE_ERROR_COST=12,
+	NET_IPV4_ROUTE_ERROR_BURST=13,
+	NET_IPV4_ROUTE_GC_ELASTICITY=14,
+	NET_IPV4_ROUTE_MTU_EXPIRES=15,
+	NET_IPV4_ROUTE_MIN_PMTU=16,
+	NET_IPV4_ROUTE_MIN_ADVMSS=17,
+	NET_IPV4_ROUTE_SECRET_INTERVAL=18,
+	NET_IPV4_ROUTE_GC_MIN_INTERVAL_MS=19,
+};
+
+enum
+{
+	NET_PROTO_CONF_ALL=-2,
+	NET_PROTO_CONF_DEFAULT=-3
+
+	/* And device ifindices ... */
+};
+
+enum
+{
+	NET_IPV4_CONF_FORWARDING=1,
+	NET_IPV4_CONF_MC_FORWARDING=2,
+	NET_IPV4_CONF_PROXY_ARP=3,
+	NET_IPV4_CONF_ACCEPT_REDIRECTS=4,
+	NET_IPV4_CONF_SECURE_REDIRECTS=5,
+	NET_IPV4_CONF_SEND_REDIRECTS=6,
+	NET_IPV4_CONF_SHARED_MEDIA=7,
+	NET_IPV4_CONF_RP_FILTER=8,
+	NET_IPV4_CONF_ACCEPT_SOURCE_ROUTE=9,
+	NET_IPV4_CONF_BOOTP_RELAY=10,
+	NET_IPV4_CONF_LOG_MARTIANS=11,
+	NET_IPV4_CONF_TAG=12,
+	NET_IPV4_CONF_ARPFILTER=13,
+	NET_IPV4_CONF_MEDIUM_ID=14,
+	NET_IPV4_CONF_NOXFRM=15,
+	NET_IPV4_CONF_NOPOLICY=16,
+	NET_IPV4_CONF_FORCE_IGMP_VERSION=17,
+	NET_IPV4_CONF_ARP_ANNOUNCE=18,
+	NET_IPV4_CONF_ARP_IGNORE=19,
+	NET_IPV4_CONF_PROMOTE_SECONDARIES=20,
+	NET_IPV4_CONF_ARP_ACCEPT=21,
+	NET_IPV4_CONF_ARP_NOTIFY=22,
+};
+
+/* /proc/sys/net/ipv4/netfilter */
+enum
+{
+	NET_IPV4_NF_CONNTRACK_MAX=1,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT=2,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV=3,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED=4,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT=5,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT=6,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK=7,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT=8,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE=9,
+	NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT=10,
+	NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT_STREAM=11,
+	NET_IPV4_NF_CONNTRACK_ICMP_TIMEOUT=12,
+	NET_IPV4_NF_CONNTRACK_GENERIC_TIMEOUT=13,
+	NET_IPV4_NF_CONNTRACK_BUCKETS=14,
+	NET_IPV4_NF_CONNTRACK_LOG_INVALID=15,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS=16,
+	NET_IPV4_NF_CONNTRACK_TCP_LOOSE=17,
+	NET_IPV4_NF_CONNTRACK_TCP_BE_LIBERAL=18,
+	NET_IPV4_NF_CONNTRACK_TCP_MAX_RETRANS=19,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED=20,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT=21,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED=22,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED=23,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT=24,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD=25,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT=26,
+	NET_IPV4_NF_CONNTRACK_COUNT=27,
+	NET_IPV4_NF_CONNTRACK_CHECKSUM=28,
+};
+ 
+/* /proc/sys/net/ipv6 */
+enum {
+	NET_IPV6_CONF=16,
+	NET_IPV6_NEIGH=17,
+	NET_IPV6_ROUTE=18,
+	NET_IPV6_ICMP=19,
+	NET_IPV6_BINDV6ONLY=20,
+	NET_IPV6_IP6FRAG_HIGH_THRESH=21,
+	NET_IPV6_IP6FRAG_LOW_THRESH=22,
+	NET_IPV6_IP6FRAG_TIME=23,
+	NET_IPV6_IP6FRAG_SECRET_INTERVAL=24,
+	NET_IPV6_MLD_MAX_MSF=25,
+};
+
+enum {
+	NET_IPV6_ROUTE_FLUSH=1,
+	NET_IPV6_ROUTE_GC_THRESH=2,
+	NET_IPV6_ROUTE_MAX_SIZE=3,
+	NET_IPV6_ROUTE_GC_MIN_INTERVAL=4,
+	NET_IPV6_ROUTE_GC_TIMEOUT=5,
+	NET_IPV6_ROUTE_GC_INTERVAL=6,
+	NET_IPV6_ROUTE_GC_ELASTICITY=7,
+	NET_IPV6_ROUTE_MTU_EXPIRES=8,
+	NET_IPV6_ROUTE_MIN_ADVMSS=9,
+	NET_IPV6_ROUTE_GC_MIN_INTERVAL_MS=10
+};
+
+enum {
+	NET_IPV6_FORWARDING=1,
+	NET_IPV6_HOP_LIMIT=2,
+	NET_IPV6_MTU=3,
+	NET_IPV6_ACCEPT_RA=4,
+	NET_IPV6_ACCEPT_REDIRECTS=5,
+	NET_IPV6_AUTOCONF=6,
+	NET_IPV6_DAD_TRANSMITS=7,
+	NET_IPV6_RTR_SOLICITS=8,
+	NET_IPV6_RTR_SOLICIT_INTERVAL=9,
+	NET_IPV6_RTR_SOLICIT_DELAY=10,
+	NET_IPV6_USE_TEMPADDR=11,
+	NET_IPV6_TEMP_VALID_LFT=12,
+	NET_IPV6_TEMP_PREFERED_LFT=13,
+	NET_IPV6_REGEN_MAX_RETRY=14,
+	NET_IPV6_MAX_DESYNC_FACTOR=15,
+	NET_IPV6_MAX_ADDRESSES=16,
+	NET_IPV6_FORCE_MLD_VERSION=17,
+	NET_IPV6_ACCEPT_RA_DEFRTR=18,
+	NET_IPV6_ACCEPT_RA_PINFO=19,
+	NET_IPV6_ACCEPT_RA_RTR_PREF=20,
+	NET_IPV6_RTR_PROBE_INTERVAL=21,
+	NET_IPV6_ACCEPT_RA_RT_INFO_MAX_PLEN=22,
+	NET_IPV6_PROXY_NDP=23,
+	NET_IPV6_ACCEPT_SOURCE_ROUTE=25,
+	__NET_IPV6_MAX
+};
+
+/* /proc/sys/net/ipv6/icmp */
+enum {
+	NET_IPV6_ICMP_RATELIMIT=1
+};
+
+/* /proc/sys/net/<protocol>/neigh/<dev> */
+enum {
+	NET_NEIGH_MCAST_SOLICIT=1,
+	NET_NEIGH_UCAST_SOLICIT=2,
+	NET_NEIGH_APP_SOLICIT=3,
+	NET_NEIGH_RETRANS_TIME=4,
+	NET_NEIGH_REACHABLE_TIME=5,
+	NET_NEIGH_DELAY_PROBE_TIME=6,
+	NET_NEIGH_GC_STALE_TIME=7,
+	NET_NEIGH_UNRES_QLEN=8,
+	NET_NEIGH_PROXY_QLEN=9,
+	NET_NEIGH_ANYCAST_DELAY=10,
+	NET_NEIGH_PROXY_DELAY=11,
+	NET_NEIGH_LOCKTIME=12,
+	NET_NEIGH_GC_INTERVAL=13,
+	NET_NEIGH_GC_THRESH1=14,
+	NET_NEIGH_GC_THRESH2=15,
+	NET_NEIGH_GC_THRESH3=16,
+	NET_NEIGH_RETRANS_TIME_MS=17,
+	NET_NEIGH_REACHABLE_TIME_MS=18,
+};
+
+/* /proc/sys/net/dccp */
+enum {
+	NET_DCCP_DEFAULT=1,
+};
+
+/* /proc/sys/net/ipx */
+enum {
+	NET_IPX_PPROP_BROADCASTING=1,
+	NET_IPX_FORWARDING=2
+};
+
+/* /proc/sys/net/llc */
+enum {
+	NET_LLC2=1,
+	NET_LLC_STATION=2,
+};
+
+/* /proc/sys/net/llc/llc2 */
+enum {
+	NET_LLC2_TIMEOUT=1,
+};
+
+/* /proc/sys/net/llc/station */
+enum {
+	NET_LLC_STATION_ACK_TIMEOUT=1,
+};
+
+/* /proc/sys/net/llc/llc2/timeout */
+enum {
+	NET_LLC2_ACK_TIMEOUT=1,
+	NET_LLC2_P_TIMEOUT=2,
+	NET_LLC2_REJ_TIMEOUT=3,
+	NET_LLC2_BUSY_TIMEOUT=4,
+};
+
+/* /proc/sys/net/appletalk */
+enum {
+	NET_ATALK_AARP_EXPIRY_TIME=1,
+	NET_ATALK_AARP_TICK_TIME=2,
+	NET_ATALK_AARP_RETRANSMIT_LIMIT=3,
+	NET_ATALK_AARP_RESOLVE_TIME=4
+};
+
+
+/* /proc/sys/net/netrom */
+enum {
+	NET_NETROM_DEFAULT_PATH_QUALITY=1,
+	NET_NETROM_OBSOLESCENCE_COUNT_INITIALISER=2,
+	NET_NETROM_NETWORK_TTL_INITIALISER=3,
+	NET_NETROM_TRANSPORT_TIMEOUT=4,
+	NET_NETROM_TRANSPORT_MAXIMUM_TRIES=5,
+	NET_NETROM_TRANSPORT_ACKNOWLEDGE_DELAY=6,
+	NET_NETROM_TRANSPORT_BUSY_DELAY=7,
+	NET_NETROM_TRANSPORT_REQUESTED_WINDOW_SIZE=8,
+	NET_NETROM_TRANSPORT_NO_ACTIVITY_TIMEOUT=9,
+	NET_NETROM_ROUTING_CONTROL=10,
+	NET_NETROM_LINK_FAILS_COUNT=11,
+	NET_NETROM_RESET=12
+};
+
+/* /proc/sys/net/ax25 */
+enum {
+	NET_AX25_IP_DEFAULT_MODE=1,
+	NET_AX25_DEFAULT_MODE=2,
+	NET_AX25_BACKOFF_TYPE=3,
+	NET_AX25_CONNECT_MODE=4,
+	NET_AX25_STANDARD_WINDOW=5,
+	NET_AX25_EXTENDED_WINDOW=6,
+	NET_AX25_T1_TIMEOUT=7,
+	NET_AX25_T2_TIMEOUT=8,
+	NET_AX25_T3_TIMEOUT=9,
+	NET_AX25_IDLE_TIMEOUT=10,
+	NET_AX25_N2=11,
+	NET_AX25_PACLEN=12,
+	NET_AX25_PROTOCOL=13,
+	NET_AX25_DAMA_SLAVE_TIMEOUT=14
+};
+
+/* /proc/sys/net/rose */
+enum {
+	NET_ROSE_RESTART_REQUEST_TIMEOUT=1,
+	NET_ROSE_CALL_REQUEST_TIMEOUT=2,
+	NET_ROSE_RESET_REQUEST_TIMEOUT=3,
+	NET_ROSE_CLEAR_REQUEST_TIMEOUT=4,
+	NET_ROSE_ACK_HOLD_BACK_TIMEOUT=5,
+	NET_ROSE_ROUTING_CONTROL=6,
+	NET_ROSE_LINK_FAIL_TIMEOUT=7,
+	NET_ROSE_MAX_VCS=8,
+	NET_ROSE_WINDOW_SIZE=9,
+	NET_ROSE_NO_ACTIVITY_TIMEOUT=10
+};
+
+/* /proc/sys/net/x25 */
+enum {
+	NET_X25_RESTART_REQUEST_TIMEOUT=1,
+	NET_X25_CALL_REQUEST_TIMEOUT=2,
+	NET_X25_RESET_REQUEST_TIMEOUT=3,
+	NET_X25_CLEAR_REQUEST_TIMEOUT=4,
+	NET_X25_ACK_HOLD_BACK_TIMEOUT=5,
+	NET_X25_FORWARD=6
+};
+
+/* /proc/sys/net/token-ring */
+enum
+{
+	NET_TR_RIF_TIMEOUT=1
+};
+
+/* /proc/sys/net/decnet/ */
+enum {
+	NET_DECNET_NODE_TYPE = 1,
+	NET_DECNET_NODE_ADDRESS = 2,
+	NET_DECNET_NODE_NAME = 3,
+	NET_DECNET_DEFAULT_DEVICE = 4,
+	NET_DECNET_TIME_WAIT = 5,
+	NET_DECNET_DN_COUNT = 6,
+	NET_DECNET_DI_COUNT = 7,
+	NET_DECNET_DR_COUNT = 8,
+	NET_DECNET_DST_GC_INTERVAL = 9,
+	NET_DECNET_CONF = 10,
+	NET_DECNET_NO_FC_MAX_CWND = 11,
+	NET_DECNET_MEM = 12,
+	NET_DECNET_RMEM = 13,
+	NET_DECNET_WMEM = 14,
+	NET_DECNET_DEBUG_LEVEL = 255
+};
+
+/* /proc/sys/net/decnet/conf/<dev> */
+enum {
+	NET_DECNET_CONF_LOOPBACK = -2,
+	NET_DECNET_CONF_DDCMP = -3,
+	NET_DECNET_CONF_PPP = -4,
+	NET_DECNET_CONF_X25 = -5,
+	NET_DECNET_CONF_GRE = -6,
+	NET_DECNET_CONF_ETHER = -7
+
+	/* ... and ifindex of devices */
+};
+
+/* /proc/sys/net/decnet/conf/<dev>/ */
+enum {
+	NET_DECNET_CONF_DEV_PRIORITY = 1,
+	NET_DECNET_CONF_DEV_T1 = 2,
+	NET_DECNET_CONF_DEV_T2 = 3,
+	NET_DECNET_CONF_DEV_T3 = 4,
+	NET_DECNET_CONF_DEV_FORWARDING = 5,
+	NET_DECNET_CONF_DEV_BLKSIZE = 6,
+	NET_DECNET_CONF_DEV_STATE = 7
+};
+
+/* /proc/sys/net/sctp */
+enum {
+	NET_SCTP_RTO_INITIAL = 1,
+	NET_SCTP_RTO_MIN     = 2,
+	NET_SCTP_RTO_MAX     = 3,
+	NET_SCTP_RTO_ALPHA   = 4,
+	NET_SCTP_RTO_BETA    = 5,
+	NET_SCTP_VALID_COOKIE_LIFE       =  6,
+	NET_SCTP_ASSOCIATION_MAX_RETRANS =  7,
+	NET_SCTP_PATH_MAX_RETRANS        =  8,
+	NET_SCTP_MAX_INIT_RETRANSMITS    =  9,
+	NET_SCTP_HB_INTERVAL             = 10,
+	NET_SCTP_PRESERVE_ENABLE         = 11,
+	NET_SCTP_MAX_BURST               = 12,
+	NET_SCTP_ADDIP_ENABLE		 = 13,
+	NET_SCTP_PRSCTP_ENABLE		 = 14,
+	NET_SCTP_SNDBUF_POLICY		 = 15,
+	NET_SCTP_SACK_TIMEOUT		 = 16,
+	NET_SCTP_RCVBUF_POLICY		 = 17,
+};
+
+/* /proc/sys/net/bridge */
+enum {
+	NET_BRIDGE_NF_CALL_ARPTABLES = 1,
+	NET_BRIDGE_NF_CALL_IPTABLES = 2,
+	NET_BRIDGE_NF_CALL_IP6TABLES = 3,
+	NET_BRIDGE_NF_FILTER_VLAN_TAGGED = 4,
+	NET_BRIDGE_NF_FILTER_PPPOE_TAGGED = 5,
+};
+
+/* proc/sys/net/irda */
+enum {
+	NET_IRDA_DISCOVERY=1,
+	NET_IRDA_DEVNAME=2,
+	NET_IRDA_DEBUG=3,
+	NET_IRDA_FAST_POLL=4,
+	NET_IRDA_DISCOVERY_SLOTS=5,
+	NET_IRDA_DISCOVERY_TIMEOUT=6,
+	NET_IRDA_SLOT_TIMEOUT=7,
+	NET_IRDA_MAX_BAUD_RATE=8,
+	NET_IRDA_MIN_TX_TURN_TIME=9,
+	NET_IRDA_MAX_TX_DATA_SIZE=10,
+	NET_IRDA_MAX_TX_WINDOW=11,
+	NET_IRDA_MAX_NOREPLY_TIME=12,
+	NET_IRDA_WARN_NOREPLY_TIME=13,
+	NET_IRDA_LAP_KEEPALIVE_TIME=14,
+};
+
+
+/* CTL_FS names: */
+enum
+{
+	FS_NRINODE=1,	/* int:current number of allocated inodes */
+	FS_STATINODE=2,
+	FS_MAXINODE=3,	/* int:maximum number of inodes that can be allocated */
+	FS_NRDQUOT=4,	/* int:current number of allocated dquots */
+	FS_MAXDQUOT=5,	/* int:maximum number of dquots that can be allocated */
+	FS_NRFILE=6,	/* int:current number of allocated filedescriptors */
+	FS_MAXFILE=7,	/* int:maximum number of filedescriptors that can be allocated */
+	FS_DENTRY=8,
+	FS_NRSUPER=9,	/* int:current number of allocated super_blocks */
+	FS_MAXSUPER=10,	/* int:maximum number of super_blocks that can be allocated */
+	FS_OVERFLOWUID=11,	/* int: overflow UID */
+	FS_OVERFLOWGID=12,	/* int: overflow GID */
+	FS_LEASES=13,	/* int: leases enabled */
+	FS_DIR_NOTIFY=14,	/* int: directory notification enabled */
+	FS_LEASE_TIME=15,	/* int: maximum time to wait for a lease break */
+	FS_DQSTATS=16,	/* disc quota usage statistics and control */
+	FS_XFS=17,	/* struct: control xfs parameters */
+	FS_AIO_NR=18,	/* current system-wide number of aio requests */
+	FS_AIO_MAX_NR=19,	/* system-wide maximum number of aio requests */
+	FS_INOTIFY=20,	/* inotify submenu */
+	FS_OCFS2=988,	/* ocfs2 */
+};
+
+/* /proc/sys/fs/quota/ */
+enum {
+	FS_DQ_LOOKUPS = 1,
+	FS_DQ_DROPS = 2,
+	FS_DQ_READS = 3,
+	FS_DQ_WRITES = 4,
+	FS_DQ_CACHE_HITS = 5,
+	FS_DQ_ALLOCATED = 6,
+	FS_DQ_FREE = 7,
+	FS_DQ_SYNCS = 8,
+	FS_DQ_WARNINGS = 9,
+};
+
+/* CTL_DEBUG names: */
+
+/* CTL_DEV names: */
+enum {
+	DEV_CDROM=1,
+	DEV_HWMON=2,
+	DEV_PARPORT=3,
+	DEV_RAID=4,
+	DEV_MAC_HID=5,
+	DEV_SCSI=6,
+	DEV_IPMI=7,
+};
+
+/* /proc/sys/dev/cdrom */
+enum {
+	DEV_CDROM_INFO=1,
+	DEV_CDROM_AUTOCLOSE=2,
+	DEV_CDROM_AUTOEJECT=3,
+	DEV_CDROM_DEBUG=4,
+	DEV_CDROM_LOCK=5,
+	DEV_CDROM_CHECK_MEDIA=6
+};
+
+/* /proc/sys/dev/parport */
+enum {
+	DEV_PARPORT_DEFAULT=-3
+};
+
+/* /proc/sys/dev/raid */
+enum {
+	DEV_RAID_SPEED_LIMIT_MIN=1,
+	DEV_RAID_SPEED_LIMIT_MAX=2
+};
+
+/* /proc/sys/dev/parport/default */
+enum {
+	DEV_PARPORT_DEFAULT_TIMESLICE=1,
+	DEV_PARPORT_DEFAULT_SPINTIME=2
+};
+
+/* /proc/sys/dev/parport/parport n */
+enum {
+	DEV_PARPORT_SPINTIME=1,
+	DEV_PARPORT_BASE_ADDR=2,
+	DEV_PARPORT_IRQ=3,
+	DEV_PARPORT_DMA=4,
+	DEV_PARPORT_MODES=5,
+	DEV_PARPORT_DEVICES=6,
+	DEV_PARPORT_AUTOPROBE=16
+};
+
+/* /proc/sys/dev/parport/parport n/devices/ */
+enum {
+	DEV_PARPORT_DEVICES_ACTIVE=-3,
+};
+
+/* /proc/sys/dev/parport/parport n/devices/device n */
+enum {
+	DEV_PARPORT_DEVICE_TIMESLICE=1,
+};
+
+/* /proc/sys/dev/mac_hid */
+enum {
+	DEV_MAC_HID_KEYBOARD_SENDS_LINUX_KEYCODES=1,
+	DEV_MAC_HID_KEYBOARD_LOCK_KEYCODES=2,
+	DEV_MAC_HID_MOUSE_BUTTON_EMULATION=3,
+	DEV_MAC_HID_MOUSE_BUTTON2_KEYCODE=4,
+	DEV_MAC_HID_MOUSE_BUTTON3_KEYCODE=5,
+	DEV_MAC_HID_ADB_MOUSE_SENDS_KEYCODES=6
+};
+
+/* /proc/sys/dev/scsi */
+enum {
+	DEV_SCSI_LOGGING_LEVEL=1,
+};
+
+/* /proc/sys/dev/ipmi */
+enum {
+	DEV_IPMI_POWEROFF_POWERCYCLE=1,
+};
+
+/* /proc/sys/abi */
+enum
+{
+	ABI_DEFHANDLER_COFF=1,	/* default handler for coff binaries */
+	ABI_DEFHANDLER_ELF=2, 	/* default handler for ELF binaries */
+	ABI_DEFHANDLER_LCALL7=3,/* default handler for procs using lcall7 */
+	ABI_DEFHANDLER_LIBCSO=4,/* default handler for an libc.so ELF interp */
+	ABI_TRACE=5,		/* tracing flags */
+	ABI_FAKE_UTSNAME=6,	/* fake target utsname information */
+};
+
+#ifdef __KERNEL__
+#include <linux/list.h>
+#include <linux/rcupdate.h>
+#include <linux/wait.h>
+#include <linux/rbtree.h>
+
+/* For the /proc/sys support */
+struct ctl_table;
+struct nsproxy;
+struct ctl_table_root;
+struct ctl_table_header;
+struct ctl_dir;
+
+typedef struct ctl_table ctl_table;
+
+typedef int proc_handler (struct ctl_table *ctl, int write,
+			  void __user *buffer, size_t *lenp, loff_t *ppos);
+
+extern int proc_dostring(struct ctl_table *, int,
+			 void __user *, size_t *, loff_t *);
+extern int proc_dointvec(struct ctl_table *, int,
+			 void __user *, size_t *, loff_t *);
+extern int proc_dointvec_minmax(struct ctl_table *, int,
+				void __user *, size_t *, loff_t *);
+extern int proc_dointvec_jiffies(struct ctl_table *, int,
+				 void __user *, size_t *, loff_t *);
+extern int proc_dointvec_userhz_jiffies(struct ctl_table *, int,
+					void __user *, size_t *, loff_t *);
+extern int proc_dointvec_ms_jiffies(struct ctl_table *, int,
+				    void __user *, size_t *, loff_t *);
+extern int proc_doulongvec_minmax(struct ctl_table *, int,
+				  void __user *, size_t *, loff_t *);
+extern int proc_doulongvec_ms_jiffies_minmax(struct ctl_table *table, int,
+				      void __user *, size_t *, loff_t *);
+extern int proc_do_large_bitmap(struct ctl_table *, int,
+				void __user *, size_t *, loff_t *);
+
+/*
+ * Register a set of sysctl names by calling register_sysctl_table
+ * with an initialised array of struct ctl_table's.  An entry with 
+ * NULL procname terminates the table.  table->de will be
+ * set up by the registration and need not be initialised in advance.
+ *
+ * sysctl names can be mirrored automatically under /proc/sys.  The
+ * procname supplied controls /proc naming.
+ *
+ * The table's mode will be honoured both for sys_sysctl(2) and
+ * proc-fs access.
+ *
+ * Leaf nodes in the sysctl tree will be represented by a single file
+ * under /proc; non-leaf nodes will be represented by directories.  A
+ * null procname disables /proc mirroring at this node.
+ *
+ * sysctl(2) can automatically manage read and write requests through
+ * the sysctl table.  The data and maxlen fields of the ctl_table
+ * struct enable minimal validation of the values being written to be
+ * performed, and the mode field allows minimal authentication.
+ * 
+ * There must be a proc_handler routine for any terminal nodes
+ * mirrored under /proc/sys (non-terminals are handled by a built-in
+ * directory handler).  Several default handlers are available to
+ * cover common cases.
+ */
+
+/* Support for userspace poll() to watch for changes */
+struct ctl_table_poll {
+	atomic_t event;
+	wait_queue_head_t wait;
+};
+
+static inline void *proc_sys_poll_event(struct ctl_table_poll *poll)
+{
+	return (void *)(unsigned long)atomic_read(&poll->event);
+}
+
+#define __CTL_TABLE_POLL_INITIALIZER(name) {				\
+	.event = ATOMIC_INIT(0),					\
+	.wait = __WAIT_QUEUE_HEAD_INITIALIZER(name.wait) }
+
+#define DEFINE_CTL_TABLE_POLL(name)					\
+	struct ctl_table_poll name = __CTL_TABLE_POLL_INITIALIZER(name)
+
+/* A sysctl table is an array of struct ctl_table: */
+struct ctl_table 
+{
+	const char *procname;		/* Text ID for /proc/sys, or zero */
+	void *data;
+	int maxlen;
+	umode_t mode;
+	struct ctl_table *child;	/* Deprecated */
+	proc_handler *proc_handler;	/* Callback for text formatting */
+	struct ctl_table_poll *poll;
+	void *extra1;
+	void *extra2;
+};
+
+struct ctl_node {
+	struct rb_node node;
+	struct ctl_table_header *header;
+};
+
+/* struct ctl_table_header is used to maintain dynamic lists of
+   struct ctl_table trees. */
+struct ctl_table_header
+{
+	union {
+		struct {
+			struct ctl_table *ctl_table;
+			int used;
+			int count;
+			int nreg;
+		};
+		struct rcu_head rcu;
+	};
+	struct completion *unregistering;
+	struct ctl_table *ctl_table_arg;
+	struct ctl_table_root *root;
+	struct ctl_table_set *set;
+	struct ctl_dir *parent;
+	struct ctl_node *node;
+};
+
+struct ctl_dir {
+	/* Header must be at the start of ctl_dir */
+	struct ctl_table_header header;
+	struct rb_root root;
+};
+
+struct ctl_table_set {
+	int (*is_seen)(struct ctl_table_set *);
+	struct ctl_dir dir;
+};
+
+struct ctl_table_root {
+	struct ctl_table_set default_set;
+	struct ctl_table_set *(*lookup)(struct ctl_table_root *root,
+					   struct nsproxy *namespaces);
+	int (*permissions)(struct ctl_table_root *root,
+			struct nsproxy *namespaces, struct ctl_table *table);
+};
+
+/* struct ctl_path describes where in the hierarchy a table is added */
+struct ctl_path {
+	const char *procname;
+};
+
+#ifdef CONFIG_SYSCTL
+
+void proc_sys_poll_notify(struct ctl_table_poll *poll);
+
+extern void setup_sysctl_set(struct ctl_table_set *p,
+	struct ctl_table_root *root,
+	int (*is_seen)(struct ctl_table_set *));
+extern void retire_sysctl_set(struct ctl_table_set *set);
+
+void register_sysctl_root(struct ctl_table_root *root);
+struct ctl_table_header *__register_sysctl_table(
+	struct ctl_table_set *set,
+	const char *path, struct ctl_table *table);
+struct ctl_table_header *__register_sysctl_paths(
+	struct ctl_table_set *set,
+	const struct ctl_path *path, struct ctl_table *table);
+struct ctl_table_header *register_sysctl(const char *path, struct ctl_table *table);
+struct ctl_table_header *register_sysctl_table(struct ctl_table * table);
+struct ctl_table_header *register_sysctl_paths(const struct ctl_path *path,
+						struct ctl_table *table);
+
+void unregister_sysctl_table(struct ctl_table_header * table);
+
+extern int sysctl_init(void);
+#else /* CONFIG_SYSCTL */
+static inline struct ctl_table_header *register_sysctl_table(struct ctl_table * table)
+{
+	return NULL;
+}
+
+static inline struct ctl_table_header *register_sysctl_paths(
+			const struct ctl_path *path, struct ctl_table *table)
+{
+	return NULL;
+}
+
+static inline void unregister_sysctl_table(struct ctl_table_header * table)
+{
+}
+
+static inline void setup_sysctl_set(struct ctl_table_set *p,
+	struct ctl_table_root *root,
+	int (*is_seen)(struct ctl_table_set *))
+{
+}
+
+#endif /* CONFIG_SYSCTL */
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_SYSCTL_H */
diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h
new file mode 100644
index 00000000..0010009b
--- /dev/null
+++ b/include/linux/sysfs.h
@@ -0,0 +1,346 @@
+/*
+ * sysfs.h - definitions for the device driver filesystem
+ *
+ * Copyright (c) 2001,2002 Patrick Mochel
+ * Copyright (c) 2004 Silicon Graphics, Inc.
+ * Copyright (c) 2007 SUSE Linux Products GmbH
+ * Copyright (c) 2007 Tejun Heo <teheo@suse.de>
+ *
+ * Please see Documentation/filesystems/sysfs.txt for more information.
+ */
+
+#ifndef _SYSFS_H_
+#define _SYSFS_H_
+
+#include <linux/compiler.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/lockdep.h>
+#include <linux/kobject_ns.h>
+#include <linux/atomic.h>
+
+struct kobject;
+struct module;
+enum kobj_ns_type;
+
+struct attribute {
+	const char		*name;
+	umode_t			mode;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	struct lock_class_key	*key;
+	struct lock_class_key	skey;
+#endif
+};
+
+/**
+ *	sysfs_attr_init - initialize a dynamically allocated sysfs attribute
+ *	@attr: struct attribute to initialize
+ *
+ *	Initialize a dynamically allocated struct attribute so we can
+ *	make lockdep happy.  This is a new requirement for attributes
+ *	and initially this is only needed when lockdep is enabled.
+ *	Lockdep gives a nice error when your attribute is added to
+ *	sysfs if you don't have this.
+ */
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+#define sysfs_attr_init(attr)				\
+do {							\
+	static struct lock_class_key __key;		\
+							\
+	(attr)->key = &__key;				\
+} while(0)
+#else
+#define sysfs_attr_init(attr) do {} while(0)
+#endif
+
+struct attribute_group {
+	const char		*name;
+	umode_t			(*is_visible)(struct kobject *,
+					      struct attribute *, int);
+	struct attribute	**attrs;
+};
+
+
+
+/**
+ * Use these macros to make defining attributes easier. See include/linux/device.h
+ * for examples..
+ */
+
+#define __ATTR(_name,_mode,_show,_store) { \
+	.attr = {.name = __stringify(_name), .mode = _mode },	\
+	.show	= _show,					\
+	.store	= _store,					\
+}
+
+#define __ATTR_RO(_name) { \
+	.attr	= { .name = __stringify(_name), .mode = 0444 },	\
+	.show	= _name##_show,					\
+}
+
+#define __ATTR_NULL { .attr = { .name = NULL } }
+
+#define attr_name(_attr) (_attr).attr.name
+
+struct file;
+struct vm_area_struct;
+
+struct bin_attribute {
+	struct attribute	attr;
+	size_t			size;
+	void			*private;
+	ssize_t (*read)(struct file *, struct kobject *, struct bin_attribute *,
+			char *, loff_t, size_t);
+	ssize_t (*write)(struct file *,struct kobject *, struct bin_attribute *,
+			 char *, loff_t, size_t);
+	int (*mmap)(struct file *, struct kobject *, struct bin_attribute *attr,
+		    struct vm_area_struct *vma);
+};
+
+/**
+ *	sysfs_bin_attr_init - initialize a dynamically allocated bin_attribute
+ *	@attr: struct bin_attribute to initialize
+ *
+ *	Initialize a dynamically allocated struct bin_attribute so we
+ *	can make lockdep happy.  This is a new requirement for
+ *	attributes and initially this is only needed when lockdep is
+ *	enabled.  Lockdep gives a nice error when your attribute is
+ *	added to sysfs if you don't have this.
+ */
+#define sysfs_bin_attr_init(bin_attr) sysfs_attr_init(&(bin_attr)->attr)
+
+struct sysfs_ops {
+	ssize_t	(*show)(struct kobject *, struct attribute *,char *);
+	ssize_t	(*store)(struct kobject *,struct attribute *,const char *, size_t);
+	const void *(*namespace)(struct kobject *, const struct attribute *);
+};
+
+struct sysfs_dirent;
+
+#ifdef CONFIG_SYSFS
+
+int sysfs_schedule_callback(struct kobject *kobj, void (*func)(void *),
+			    void *data, struct module *owner);
+
+int __must_check sysfs_create_dir(struct kobject *kobj);
+void sysfs_remove_dir(struct kobject *kobj);
+int __must_check sysfs_rename_dir(struct kobject *kobj, const char *new_name);
+int __must_check sysfs_move_dir(struct kobject *kobj,
+				struct kobject *new_parent_kobj);
+
+int __must_check sysfs_create_file(struct kobject *kobj,
+				   const struct attribute *attr);
+int __must_check sysfs_create_files(struct kobject *kobj,
+				   const struct attribute **attr);
+int __must_check sysfs_chmod_file(struct kobject *kobj,
+				  const struct attribute *attr, umode_t mode);
+void sysfs_remove_file(struct kobject *kobj, const struct attribute *attr);
+void sysfs_remove_files(struct kobject *kobj, const struct attribute **attr);
+
+int __must_check sysfs_create_bin_file(struct kobject *kobj,
+				       const struct bin_attribute *attr);
+void sysfs_remove_bin_file(struct kobject *kobj,
+			   const struct bin_attribute *attr);
+
+int __must_check sysfs_create_link(struct kobject *kobj, struct kobject *target,
+				   const char *name);
+int __must_check sysfs_create_link_nowarn(struct kobject *kobj,
+					  struct kobject *target,
+					  const char *name);
+void sysfs_remove_link(struct kobject *kobj, const char *name);
+
+int sysfs_rename_link(struct kobject *kobj, struct kobject *target,
+			const char *old_name, const char *new_name);
+
+void sysfs_delete_link(struct kobject *dir, struct kobject *targ,
+			const char *name);
+
+int __must_check sysfs_create_group(struct kobject *kobj,
+				    const struct attribute_group *grp);
+int sysfs_update_group(struct kobject *kobj,
+		       const struct attribute_group *grp);
+void sysfs_remove_group(struct kobject *kobj,
+			const struct attribute_group *grp);
+int sysfs_add_file_to_group(struct kobject *kobj,
+			const struct attribute *attr, const char *group);
+void sysfs_remove_file_from_group(struct kobject *kobj,
+			const struct attribute *attr, const char *group);
+int sysfs_merge_group(struct kobject *kobj,
+		       const struct attribute_group *grp);
+void sysfs_unmerge_group(struct kobject *kobj,
+		       const struct attribute_group *grp);
+
+void sysfs_notify(struct kobject *kobj, const char *dir, const char *attr);
+void sysfs_notify_dirent(struct sysfs_dirent *sd);
+struct sysfs_dirent *sysfs_get_dirent(struct sysfs_dirent *parent_sd,
+				      const void *ns,
+				      const unsigned char *name);
+struct sysfs_dirent *sysfs_get(struct sysfs_dirent *sd);
+void sysfs_put(struct sysfs_dirent *sd);
+
+int __must_check sysfs_init(void);
+
+#else /* CONFIG_SYSFS */
+
+static inline int sysfs_schedule_callback(struct kobject *kobj,
+		void (*func)(void *), void *data, struct module *owner)
+{
+	return -ENOSYS;
+}
+
+static inline int sysfs_create_dir(struct kobject *kobj)
+{
+	return 0;
+}
+
+static inline void sysfs_remove_dir(struct kobject *kobj)
+{
+}
+
+static inline int sysfs_rename_dir(struct kobject *kobj, const char *new_name)
+{
+	return 0;
+}
+
+static inline int sysfs_move_dir(struct kobject *kobj,
+				 struct kobject *new_parent_kobj)
+{
+	return 0;
+}
+
+static inline int sysfs_create_file(struct kobject *kobj,
+				    const struct attribute *attr)
+{
+	return 0;
+}
+
+static inline int sysfs_create_files(struct kobject *kobj,
+				    const struct attribute **attr)
+{
+	return 0;
+}
+
+static inline int sysfs_chmod_file(struct kobject *kobj,
+				   const struct attribute *attr, umode_t mode)
+{
+	return 0;
+}
+
+static inline void sysfs_remove_file(struct kobject *kobj,
+				     const struct attribute *attr)
+{
+}
+
+static inline void sysfs_remove_files(struct kobject *kobj,
+				     const struct attribute **attr)
+{
+}
+
+static inline int sysfs_create_bin_file(struct kobject *kobj,
+					const struct bin_attribute *attr)
+{
+	return 0;
+}
+
+static inline void sysfs_remove_bin_file(struct kobject *kobj,
+					 const struct bin_attribute *attr)
+{
+}
+
+static inline int sysfs_create_link(struct kobject *kobj,
+				    struct kobject *target, const char *name)
+{
+	return 0;
+}
+
+static inline int sysfs_create_link_nowarn(struct kobject *kobj,
+					   struct kobject *target,
+					   const char *name)
+{
+	return 0;
+}
+
+static inline void sysfs_remove_link(struct kobject *kobj, const char *name)
+{
+}
+
+static inline int sysfs_rename_link(struct kobject *k, struct kobject *t,
+				    const char *old_name, const char *new_name)
+{
+	return 0;
+}
+
+static inline void sysfs_delete_link(struct kobject *k, struct kobject *t,
+				     const char *name)
+{
+}
+
+static inline int sysfs_create_group(struct kobject *kobj,
+				     const struct attribute_group *grp)
+{
+	return 0;
+}
+
+static inline int sysfs_update_group(struct kobject *kobj,
+				const struct attribute_group *grp)
+{
+	return 0;
+}
+
+static inline void sysfs_remove_group(struct kobject *kobj,
+				      const struct attribute_group *grp)
+{
+}
+
+static inline int sysfs_add_file_to_group(struct kobject *kobj,
+		const struct attribute *attr, const char *group)
+{
+	return 0;
+}
+
+static inline void sysfs_remove_file_from_group(struct kobject *kobj,
+		const struct attribute *attr, const char *group)
+{
+}
+
+static inline int sysfs_merge_group(struct kobject *kobj,
+		       const struct attribute_group *grp)
+{
+	return 0;
+}
+
+static inline void sysfs_unmerge_group(struct kobject *kobj,
+		       const struct attribute_group *grp)
+{
+}
+
+static inline void sysfs_notify(struct kobject *kobj, const char *dir,
+				const char *attr)
+{
+}
+static inline void sysfs_notify_dirent(struct sysfs_dirent *sd)
+{
+}
+static inline
+struct sysfs_dirent *sysfs_get_dirent(struct sysfs_dirent *parent_sd,
+				      const void *ns,
+				      const unsigned char *name)
+{
+	return NULL;
+}
+static inline struct sysfs_dirent *sysfs_get(struct sysfs_dirent *sd)
+{
+	return NULL;
+}
+static inline void sysfs_put(struct sysfs_dirent *sd)
+{
+}
+
+static inline int __must_check sysfs_init(void)
+{
+	return 0;
+}
+
+#endif /* CONFIG_SYSFS */
+
+#endif /* _SYSFS_H_ */
diff --git a/include/linux/sysinfo.h b/include/linux/sysinfo.h
new file mode 100644
index 00000000..934335a2
--- /dev/null
+++ b/include/linux/sysinfo.h
@@ -0,0 +1,24 @@
+#ifndef _LINUX_SYSINFO_H
+#define _LINUX_SYSINFO_H
+
+#include <linux/types.h>
+
+#define SI_LOAD_SHIFT	16
+struct sysinfo {
+	__kernel_long_t uptime;		/* Seconds since boot */
+	__kernel_ulong_t loads[3];	/* 1, 5, and 15 minute load averages */
+	__kernel_ulong_t totalram;	/* Total usable main memory size */
+	__kernel_ulong_t freeram;	/* Available memory size */
+	__kernel_ulong_t sharedram;	/* Amount of shared memory */
+	__kernel_ulong_t bufferram;	/* Memory used by buffers */
+	__kernel_ulong_t totalswap;	/* Total swap space size */
+	__kernel_ulong_t freeswap;	/* swap space still available */
+	__u16 procs;		   	/* Number of current processes */
+	__u16 pad;		   	/* Explicit padding for m68k */
+	__kernel_ulong_t totalhigh;	/* Total high memory size */
+	__kernel_ulong_t freehigh;	/* Available high memory size */
+	__u32 mem_unit;			/* Memory unit size in bytes */
+	char _f[20-2*sizeof(__kernel_ulong_t)-sizeof(__u32)];	/* Padding: libc5 uses this.. */
+};
+
+#endif /* _LINUX_SYSINFO_H */
diff --git a/include/linux/syslog.h b/include/linux/syslog.h
new file mode 100644
index 00000000..38911391
--- /dev/null
+++ b/include/linux/syslog.h
@@ -0,0 +1,52 @@
+/*  Syslog internals
+ *
+ *  Copyright 2010 Canonical, Ltd.
+ *  Author: Kees Cook <kees.cook@canonical.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _LINUX_SYSLOG_H
+#define _LINUX_SYSLOG_H
+
+/* Close the log.  Currently a NOP. */
+#define SYSLOG_ACTION_CLOSE          0
+/* Open the log. Currently a NOP. */
+#define SYSLOG_ACTION_OPEN           1
+/* Read from the log. */
+#define SYSLOG_ACTION_READ           2
+/* Read all messages remaining in the ring buffer. */
+#define SYSLOG_ACTION_READ_ALL       3
+/* Read and clear all messages remaining in the ring buffer */
+#define SYSLOG_ACTION_READ_CLEAR     4
+/* Clear ring buffer. */
+#define SYSLOG_ACTION_CLEAR          5
+/* Disable printk's to console */
+#define SYSLOG_ACTION_CONSOLE_OFF    6
+/* Enable printk's to console */
+#define SYSLOG_ACTION_CONSOLE_ON     7
+/* Set level of messages printed to console */
+#define SYSLOG_ACTION_CONSOLE_LEVEL  8
+/* Return number of unread characters in the log buffer */
+#define SYSLOG_ACTION_SIZE_UNREAD    9
+/* Return size of the log buffer */
+#define SYSLOG_ACTION_SIZE_BUFFER   10
+
+#define SYSLOG_FROM_CALL 0
+#define SYSLOG_FROM_FILE 1
+
+int do_syslog(int type, char __user *buf, int count, bool from_file);
+
+#endif /* _LINUX_SYSLOG_H */
diff --git a/include/linux/sysrq.h b/include/linux/sysrq.h
new file mode 100644
index 00000000..7faf933c
--- /dev/null
+++ b/include/linux/sysrq.h
@@ -0,0 +1,78 @@
+/* -*- linux-c -*-
+ *
+ *	$Id: sysrq.h,v 1.3 1997/07/17 11:54:33 mj Exp $
+ *
+ *	Linux Magic System Request Key Hacks
+ *
+ *	(c) 1997 Martin Mares <mj@atrey.karlin.mff.cuni.cz>
+ *
+ *	(c) 2000 Crutcher Dunnavant <crutcher+kernel@datastacks.com>
+ *	overhauled to use key registration
+ *	based upon discusions in irc://irc.openprojects.net/#kernelnewbies
+ */
+
+#ifndef _LINUX_SYSRQ_H
+#define _LINUX_SYSRQ_H
+
+#include <linux/errno.h>
+#include <linux/types.h>
+
+/* Enable/disable SYSRQ support by default (0==no, 1==yes). */
+#define SYSRQ_DEFAULT_ENABLE	1
+
+/* Possible values of bitmask for enabling sysrq functions */
+/* 0x0001 is reserved for enable everything */
+#define SYSRQ_ENABLE_LOG	0x0002
+#define SYSRQ_ENABLE_KEYBOARD	0x0004
+#define SYSRQ_ENABLE_DUMP	0x0008
+#define SYSRQ_ENABLE_SYNC	0x0010
+#define SYSRQ_ENABLE_REMOUNT	0x0020
+#define SYSRQ_ENABLE_SIGNAL	0x0040
+#define SYSRQ_ENABLE_BOOT	0x0080
+#define SYSRQ_ENABLE_RTNICE	0x0100
+
+struct sysrq_key_op {
+	void (*handler)(int);
+	char *help_msg;
+	char *action_msg;
+	int enable_mask;
+};
+
+#ifdef CONFIG_MAGIC_SYSRQ
+
+/* Generic SysRq interface -- you may call it from any device driver, supplying
+ * ASCII code of the key, pointer to registers and kbd/tty structs (if they
+ * are available -- else NULL's).
+ */
+
+void handle_sysrq(int key);
+void __handle_sysrq(int key, bool check_mask);
+int register_sysrq_key(int key, struct sysrq_key_op *op);
+int unregister_sysrq_key(int key, struct sysrq_key_op *op);
+struct sysrq_key_op *__sysrq_get_key_op(int key);
+
+int sysrq_toggle_support(int enable_mask);
+
+#else
+
+static inline void handle_sysrq(int key)
+{
+}
+
+static inline void __handle_sysrq(int key, bool check_mask)
+{
+}
+
+static inline int register_sysrq_key(int key, struct sysrq_key_op *op)
+{
+	return -EINVAL;
+}
+
+static inline int unregister_sysrq_key(int key, struct sysrq_key_op *op)
+{
+	return -EINVAL;
+}
+
+#endif
+
+#endif /* _LINUX_SYSRQ_H */
diff --git a/include/linux/sysv_fs.h b/include/linux/sysv_fs.h
new file mode 100644
index 00000000..e47d6d90
--- /dev/null
+++ b/include/linux/sysv_fs.h
@@ -0,0 +1,213 @@
+#ifndef _LINUX_SYSV_FS_H
+#define _LINUX_SYSV_FS_H
+
+#define __packed2__	__attribute__((packed, aligned(2)))
+
+
+#ifndef __KERNEL__
+typedef u16 __fs16;
+typedef u32 __fs16;
+#endif
+
+/* inode numbers are 16 bit */
+typedef __fs16 sysv_ino_t;
+
+/* Block numbers are 24 bit, sometimes stored in 32 bit.
+   On Coherent FS, they are always stored in PDP-11 manner: the least
+   significant 16 bits come last. */
+typedef __fs32 sysv_zone_t;
+
+/* 0 is non-existent */
+#define SYSV_BADBL_INO	1	/* inode of bad blocks file */
+#define SYSV_ROOT_INO	2	/* inode of root directory */
+
+
+/* Xenix super-block data on disk */
+#define XENIX_NICINOD	100	/* number of inode cache entries */
+#define XENIX_NICFREE	100	/* number of free block list chunk entries */
+struct xenix_super_block {
+	__fs16		s_isize; /* index of first data zone */
+	__fs32		s_fsize __packed2__; /* total number of zones of this fs */
+	/* the start of the free block list: */
+	__fs16		s_nfree;	/* number of free blocks in s_free, <= XENIX_NICFREE */
+	sysv_zone_t	s_free[XENIX_NICFREE]; /* first free block list chunk */
+	/* the cache of free inodes: */
+	__fs16		s_ninode; /* number of free inodes in s_inode, <= XENIX_NICINOD */
+	sysv_ino_t	s_inode[XENIX_NICINOD]; /* some free inodes */
+	/* locks, not used by Linux: */
+	char		s_flock;	/* lock during free block list manipulation */
+	char		s_ilock;	/* lock during inode cache manipulation */
+	char		s_fmod;		/* super-block modified flag */
+	char		s_ronly;	/* flag whether fs is mounted read-only */
+	__fs32		s_time __packed2__; /* time of last super block update */
+	__fs32		s_tfree __packed2__; /* total number of free zones */
+	__fs16		s_tinode;	/* total number of free inodes */
+	__fs16		s_dinfo[4];	/* device information ?? */
+	char		s_fname[6];	/* file system volume name */
+	char		s_fpack[6];	/* file system pack name */
+	char		s_clean;	/* set to 0x46 when filesystem is properly unmounted */
+	char		s_fill[371];
+	s32		s_magic;	/* version of file system */
+	__fs32		s_type;		/* type of file system: 1 for 512 byte blocks
+								2 for 1024 byte blocks
+								3 for 2048 byte blocks */
+								
+};
+
+/*
+ * SystemV FS comes in two variants:
+ * sysv2: System V Release 2 (e.g. Microport), structure elements aligned(2).
+ * sysv4: System V Release 4 (e.g. Consensys), structure elements aligned(4).
+ */
+#define SYSV_NICINOD	100	/* number of inode cache entries */
+#define SYSV_NICFREE	50	/* number of free block list chunk entries */
+
+/* SystemV4 super-block data on disk */
+struct sysv4_super_block {
+	__fs16	s_isize;	/* index of first data zone */
+	u16	s_pad0;
+	__fs32	s_fsize;	/* total number of zones of this fs */
+	/* the start of the free block list: */
+	__fs16	s_nfree;	/* number of free blocks in s_free, <= SYSV_NICFREE */
+	u16	s_pad1;
+	sysv_zone_t	s_free[SYSV_NICFREE]; /* first free block list chunk */
+	/* the cache of free inodes: */
+	__fs16	s_ninode;	/* number of free inodes in s_inode, <= SYSV_NICINOD */
+	u16	s_pad2;
+	sysv_ino_t     s_inode[SYSV_NICINOD]; /* some free inodes */
+	/* locks, not used by Linux: */
+	char	s_flock;	/* lock during free block list manipulation */
+	char	s_ilock;	/* lock during inode cache manipulation */
+	char	s_fmod;		/* super-block modified flag */
+	char	s_ronly;	/* flag whether fs is mounted read-only */
+	__fs32	s_time;		/* time of last super block update */
+	__fs16	s_dinfo[4];	/* device information ?? */
+	__fs32	s_tfree;	/* total number of free zones */
+	__fs16	s_tinode;	/* total number of free inodes */
+	u16	s_pad3;
+	char	s_fname[6];	/* file system volume name */
+	char	s_fpack[6];	/* file system pack name */
+	s32	s_fill[12];
+	__fs32	s_state;	/* file system state: 0x7c269d38-s_time means clean */
+	s32	s_magic;	/* version of file system */
+	__fs32	s_type;		/* type of file system: 1 for 512 byte blocks
+								2 for 1024 byte blocks */
+};
+
+/* SystemV2 super-block data on disk */
+struct sysv2_super_block {
+	__fs16	s_isize; 		/* index of first data zone */
+	__fs32	s_fsize __packed2__;	/* total number of zones of this fs */
+	/* the start of the free block list: */
+	__fs16	s_nfree;		/* number of free blocks in s_free, <= SYSV_NICFREE */
+	sysv_zone_t s_free[SYSV_NICFREE];	/* first free block list chunk */
+	/* the cache of free inodes: */
+	__fs16	s_ninode;		/* number of free inodes in s_inode, <= SYSV_NICINOD */
+	sysv_ino_t     s_inode[SYSV_NICINOD]; /* some free inodes */
+	/* locks, not used by Linux: */
+	char	s_flock;		/* lock during free block list manipulation */
+	char	s_ilock;		/* lock during inode cache manipulation */
+	char	s_fmod;			/* super-block modified flag */
+	char	s_ronly;		/* flag whether fs is mounted read-only */
+	__fs32	s_time __packed2__;	/* time of last super block update */
+	__fs16	s_dinfo[4];		/* device information ?? */
+	__fs32	s_tfree __packed2__;	/* total number of free zones */
+	__fs16	s_tinode;		/* total number of free inodes */
+	char	s_fname[6];		/* file system volume name */
+	char	s_fpack[6];		/* file system pack name */
+	s32	s_fill[14];
+	__fs32	s_state;		/* file system state: 0xcb096f43 means clean */
+	s32	s_magic;		/* version of file system */
+	__fs32	s_type;			/* type of file system: 1 for 512 byte blocks
+								2 for 1024 byte blocks */
+};
+
+/* V7 super-block data on disk */
+#define V7_NICINOD     100     /* number of inode cache entries */
+#define V7_NICFREE     50      /* number of free block list chunk entries */
+struct v7_super_block {
+	__fs16 s_isize;        /* index of first data zone */
+	__fs32 s_fsize __packed2__; /* total number of zones of this fs */
+	/* the start of the free block list: */
+	__fs16 s_nfree;        /* number of free blocks in s_free, <= V7_NICFREE */
+	sysv_zone_t s_free[V7_NICFREE]; /* first free block list chunk */
+	/* the cache of free inodes: */
+	__fs16 s_ninode;       /* number of free inodes in s_inode, <= V7_NICINOD */
+	sysv_ino_t      s_inode[V7_NICINOD]; /* some free inodes */
+	/* locks, not used by Linux or V7: */
+	char    s_flock;        /* lock during free block list manipulation */
+	char    s_ilock;        /* lock during inode cache manipulation */
+	char    s_fmod;         /* super-block modified flag */
+	char    s_ronly;        /* flag whether fs is mounted read-only */
+	__fs32  s_time __packed2__; /* time of last super block update */
+	/* the following fields are not maintained by V7: */
+	__fs32  s_tfree __packed2__; /* total number of free zones */
+	__fs16  s_tinode;       /* total number of free inodes */
+	__fs16  s_m;            /* interleave factor */
+	__fs16  s_n;            /* interleave factor */
+	char    s_fname[6];     /* file system name */
+	char    s_fpack[6];     /* file system pack name */
+};
+/* Constants to aid sanity checking */
+/* This is not a hard limit, nor enforced by v7 kernel. It's actually just
+ * the limit used by Seventh Edition's ls, though is high enough to assume
+ * that no reasonable file system would have that much entries in root
+ * directory. Thus, if we see anything higher, we just probably got the
+ * endiannes wrong. */
+#define V7_NFILES	1024
+/* The disk addresses are three-byte (despite direct block addresses being
+ * aligned word-wise in inode). If the most significant byte is non-zero,
+ * something is most likely wrong (not a filesystem, bad bytesex). */
+#define V7_MAXSIZE	0x00ffffff
+
+/* Coherent super-block data on disk */
+#define COH_NICINOD	100	/* number of inode cache entries */
+#define COH_NICFREE	64	/* number of free block list chunk entries */
+struct coh_super_block {
+	__fs16		s_isize;	/* index of first data zone */
+	__fs32		s_fsize __packed2__; /* total number of zones of this fs */
+	/* the start of the free block list: */
+	__fs16 s_nfree;	/* number of free blocks in s_free, <= COH_NICFREE */
+	sysv_zone_t	s_free[COH_NICFREE] __packed2__; /* first free block list chunk */
+	/* the cache of free inodes: */
+	__fs16		s_ninode;	/* number of free inodes in s_inode, <= COH_NICINOD */
+	sysv_ino_t	s_inode[COH_NICINOD]; /* some free inodes */
+	/* locks, not used by Linux: */
+	char		s_flock;	/* lock during free block list manipulation */
+	char		s_ilock;	/* lock during inode cache manipulation */
+	char		s_fmod;		/* super-block modified flag */
+	char		s_ronly;	/* flag whether fs is mounted read-only */
+	__fs32		s_time __packed2__; /* time of last super block update */
+	__fs32		s_tfree __packed2__; /* total number of free zones */
+	__fs16		s_tinode;	/* total number of free inodes */
+	__fs16		s_interleave_m;	/* interleave factor */
+	__fs16		s_interleave_n;
+	char		s_fname[6];	/* file system volume name */
+	char		s_fpack[6];	/* file system pack name */
+	__fs32		s_unique;	/* zero, not used */
+};
+
+/* SystemV/Coherent inode data on disk */
+struct sysv_inode {
+	__fs16 i_mode;
+	__fs16 i_nlink;
+	__fs16 i_uid;
+	__fs16 i_gid;
+	__fs32 i_size;
+	u8  i_data[3*(10+1+1+1)];
+	u8  i_gen;
+	__fs32 i_atime;	/* time of last access */
+	__fs32 i_mtime;	/* time of last modification */
+	__fs32 i_ctime;	/* time of creation */
+};
+
+/* SystemV/Coherent directory entry on disk */
+#define SYSV_NAMELEN	14	/* max size of name in struct sysv_dir_entry */
+struct sysv_dir_entry {
+	sysv_ino_t inode;
+	char name[SYSV_NAMELEN]; /* up to 14 characters, the rest are zeroes */
+};
+
+#define SYSV_DIRSIZE	sizeof(struct sysv_dir_entry)	/* size of every directory entry */
+
+#endif /* _LINUX_SYSV_FS_H */
diff --git a/include/linux/task_io_accounting.h b/include/linux/task_io_accounting.h
new file mode 100644
index 00000000..bdf855c2
--- /dev/null
+++ b/include/linux/task_io_accounting.h
@@ -0,0 +1,45 @@
+/*
+ * task_io_accounting: a structure which is used for recording a single task's
+ * IO statistics.
+ *
+ * Don't include this header file directly - it is designed to be dragged in via
+ * sched.h.
+ *
+ * Blame Andrew Morton for all this.
+ */
+
+struct task_io_accounting {
+#ifdef CONFIG_TASK_XACCT
+	/* bytes read */
+	u64 rchar;
+	/*  bytes written */
+	u64 wchar;
+	/* # of read syscalls */
+	u64 syscr;
+	/* # of write syscalls */
+	u64 syscw;
+#endif /* CONFIG_TASK_XACCT */
+
+#ifdef CONFIG_TASK_IO_ACCOUNTING
+	/*
+	 * The number of bytes which this task has caused to be read from
+	 * storage.
+	 */
+	u64 read_bytes;
+
+	/*
+	 * The number of bytes which this task has caused, or shall cause to be
+	 * written to disk.
+	 */
+	u64 write_bytes;
+
+	/*
+	 * A task can cause "negative" IO too.  If this task truncates some
+	 * dirty pagecache, some IO which another task has been accounted for
+	 * (in its write_bytes) will not be happening.  We _could_ just
+	 * subtract that from the truncating task's write_bytes, but there is
+	 * information loss in doing that.
+	 */
+	u64 cancelled_write_bytes;
+#endif /* CONFIG_TASK_IO_ACCOUNTING */
+};
diff --git a/include/linux/task_io_accounting_ops.h b/include/linux/task_io_accounting_ops.h
new file mode 100644
index 00000000..4d090f9e
--- /dev/null
+++ b/include/linux/task_io_accounting_ops.h
@@ -0,0 +1,113 @@
+/*
+ * Task I/O accounting operations
+ */
+#ifndef __TASK_IO_ACCOUNTING_OPS_INCLUDED
+#define __TASK_IO_ACCOUNTING_OPS_INCLUDED
+
+#include <linux/sched.h>
+
+#ifdef CONFIG_TASK_IO_ACCOUNTING
+static inline void task_io_account_read(size_t bytes)
+{
+	current->ioac.read_bytes += bytes;
+}
+
+/*
+ * We approximate number of blocks, because we account bytes only.
+ * A 'block' is 512 bytes
+ */
+static inline unsigned long task_io_get_inblock(const struct task_struct *p)
+{
+	return p->ioac.read_bytes >> 9;
+}
+
+static inline void task_io_account_write(size_t bytes)
+{
+	current->ioac.write_bytes += bytes;
+}
+
+/*
+ * We approximate number of blocks, because we account bytes only.
+ * A 'block' is 512 bytes
+ */
+static inline unsigned long task_io_get_oublock(const struct task_struct *p)
+{
+	return p->ioac.write_bytes >> 9;
+}
+
+static inline void task_io_account_cancelled_write(size_t bytes)
+{
+	current->ioac.cancelled_write_bytes += bytes;
+}
+
+static inline void task_io_accounting_init(struct task_io_accounting *ioac)
+{
+	memset(ioac, 0, sizeof(*ioac));
+}
+
+static inline void task_blk_io_accounting_add(struct task_io_accounting *dst,
+						struct task_io_accounting *src)
+{
+	dst->read_bytes += src->read_bytes;
+	dst->write_bytes += src->write_bytes;
+	dst->cancelled_write_bytes += src->cancelled_write_bytes;
+}
+
+#else
+
+static inline void task_io_account_read(size_t bytes)
+{
+}
+
+static inline unsigned long task_io_get_inblock(const struct task_struct *p)
+{
+	return 0;
+}
+
+static inline void task_io_account_write(size_t bytes)
+{
+}
+
+static inline unsigned long task_io_get_oublock(const struct task_struct *p)
+{
+	return 0;
+}
+
+static inline void task_io_account_cancelled_write(size_t bytes)
+{
+}
+
+static inline void task_io_accounting_init(struct task_io_accounting *ioac)
+{
+}
+
+static inline void task_blk_io_accounting_add(struct task_io_accounting *dst,
+						struct task_io_accounting *src)
+{
+}
+
+#endif /* CONFIG_TASK_IO_ACCOUNTING */
+
+#ifdef CONFIG_TASK_XACCT
+static inline void task_chr_io_accounting_add(struct task_io_accounting *dst,
+						struct task_io_accounting *src)
+{
+	dst->rchar += src->rchar;
+	dst->wchar += src->wchar;
+	dst->syscr += src->syscr;
+	dst->syscw += src->syscw;
+}
+#else
+static inline void task_chr_io_accounting_add(struct task_io_accounting *dst,
+						struct task_io_accounting *src)
+{
+}
+#endif /* CONFIG_TASK_XACCT */
+
+static inline void task_io_accounting_add(struct task_io_accounting *dst,
+						struct task_io_accounting *src)
+{
+	task_chr_io_accounting_add(dst, src);
+	task_blk_io_accounting_add(dst, src);
+}
+#endif /* __TASK_IO_ACCOUNTING_OPS_INCLUDED */
diff --git a/include/linux/taskstats.h b/include/linux/taskstats.h
new file mode 100644
index 00000000..2466e550
--- /dev/null
+++ b/include/linux/taskstats.h
@@ -0,0 +1,213 @@
+/* taskstats.h - exporting per-task statistics
+ *
+ * Copyright (C) Shailabh Nagar, IBM Corp. 2006
+ *           (C) Balbir Singh,   IBM Corp. 2006
+ *           (C) Jay Lan,        SGI, 2006
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _LINUX_TASKSTATS_H
+#define _LINUX_TASKSTATS_H
+
+#include <linux/types.h>
+
+/* Format for per-task data returned to userland when
+ *	- a task exits
+ *	- listener requests stats for a task
+ *
+ * The struct is versioned. Newer versions should only add fields to
+ * the bottom of the struct to maintain backward compatibility.
+ *
+ *
+ * To add new fields
+ *	a) bump up TASKSTATS_VERSION
+ *	b) add comment indicating new version number at end of struct
+ *	c) add new fields after version comment; maintain 64-bit alignment
+ */
+
+
+#define TASKSTATS_VERSION	8
+#define TS_COMM_LEN		32	/* should be >= TASK_COMM_LEN
+					 * in linux/sched.h */
+
+struct taskstats {
+
+	/* The version number of this struct. This field is always set to
+	 * TAKSTATS_VERSION, which is defined in <linux/taskstats.h>.
+	 * Each time the struct is changed, the value should be incremented.
+	 */
+	__u16	version;
+	__u32	ac_exitcode;		/* Exit status */
+
+	/* The accounting flags of a task as defined in <linux/acct.h>
+	 * Defined values are AFORK, ASU, ACOMPAT, ACORE, and AXSIG.
+	 */
+	__u8	ac_flag;		/* Record flags */
+	__u8	ac_nice;		/* task_nice */
+
+	/* Delay accounting fields start
+	 *
+	 * All values, until comment "Delay accounting fields end" are
+	 * available only if delay accounting is enabled, even though the last
+	 * few fields are not delays
+	 *
+	 * xxx_count is the number of delay values recorded
+	 * xxx_delay_total is the corresponding cumulative delay in nanoseconds
+	 *
+	 * xxx_delay_total wraps around to zero on overflow
+	 * xxx_count incremented regardless of overflow
+	 */
+
+	/* Delay waiting for cpu, while runnable
+	 * count, delay_total NOT updated atomically
+	 */
+	__u64	cpu_count __attribute__((aligned(8)));
+	__u64	cpu_delay_total;
+
+	/* Following four fields atomically updated using task->delays->lock */
+
+	/* Delay waiting for synchronous block I/O to complete
+	 * does not account for delays in I/O submission
+	 */
+	__u64	blkio_count;
+	__u64	blkio_delay_total;
+
+	/* Delay waiting for page fault I/O (swap in only) */
+	__u64	swapin_count;
+	__u64	swapin_delay_total;
+
+	/* cpu "wall-clock" running time
+	 * On some architectures, value will adjust for cpu time stolen
+	 * from the kernel in involuntary waits due to virtualization.
+	 * Value is cumulative, in nanoseconds, without a corresponding count
+	 * and wraps around to zero silently on overflow
+	 */
+	__u64	cpu_run_real_total;
+
+	/* cpu "virtual" running time
+	 * Uses time intervals seen by the kernel i.e. no adjustment
+	 * for kernel's involuntary waits due to virtualization.
+	 * Value is cumulative, in nanoseconds, without a corresponding count
+	 * and wraps around to zero silently on overflow
+	 */
+	__u64	cpu_run_virtual_total;
+	/* Delay accounting fields end */
+	/* version 1 ends here */
+
+	/* Basic Accounting Fields start */
+	char	ac_comm[TS_COMM_LEN];	/* Command name */
+	__u8	ac_sched __attribute__((aligned(8)));
+					/* Scheduling discipline */
+	__u8	ac_pad[3];
+	__u32	ac_uid __attribute__((aligned(8)));
+					/* User ID */
+	__u32	ac_gid;			/* Group ID */
+	__u32	ac_pid;			/* Process ID */
+	__u32	ac_ppid;		/* Parent process ID */
+	__u32	ac_btime;		/* Begin time [sec since 1970] */
+	__u64	ac_etime __attribute__((aligned(8)));
+					/* Elapsed time [usec] */
+	__u64	ac_utime;		/* User CPU time [usec] */
+	__u64	ac_stime;		/* SYstem CPU time [usec] */
+	__u64	ac_minflt;		/* Minor Page Fault Count */
+	__u64	ac_majflt;		/* Major Page Fault Count */
+	/* Basic Accounting Fields end */
+
+	/* Extended accounting fields start */
+	/* Accumulated RSS usage in duration of a task, in MBytes-usecs.
+	 * The current rss usage is added to this counter every time
+	 * a tick is charged to a task's system time. So, at the end we
+	 * will have memory usage multiplied by system time. Thus an
+	 * average usage per system time unit can be calculated.
+	 */
+	__u64	coremem;		/* accumulated RSS usage in MB-usec */
+	/* Accumulated virtual memory usage in duration of a task.
+	 * Same as acct_rss_mem1 above except that we keep track of VM usage.
+	 */
+	__u64	virtmem;		/* accumulated VM  usage in MB-usec */
+
+	/* High watermark of RSS and virtual memory usage in duration of
+	 * a task, in KBytes.
+	 */
+	__u64	hiwater_rss;		/* High-watermark of RSS usage, in KB */
+	__u64	hiwater_vm;		/* High-water VM usage, in KB */
+
+	/* The following four fields are I/O statistics of a task. */
+	__u64	read_char;		/* bytes read */
+	__u64	write_char;		/* bytes written */
+	__u64	read_syscalls;		/* read syscalls */
+	__u64	write_syscalls;		/* write syscalls */
+	/* Extended accounting fields end */
+
+#define TASKSTATS_HAS_IO_ACCOUNTING
+	/* Per-task storage I/O accounting starts */
+	__u64	read_bytes;		/* bytes of read I/O */
+	__u64	write_bytes;		/* bytes of write I/O */
+	__u64	cancelled_write_bytes;	/* bytes of cancelled write I/O */
+
+	__u64  nvcsw;			/* voluntary_ctxt_switches */
+	__u64  nivcsw;			/* nonvoluntary_ctxt_switches */
+
+	/* time accounting for SMT machines */
+	__u64	ac_utimescaled;		/* utime scaled on frequency etc */
+	__u64	ac_stimescaled;		/* stime scaled on frequency etc */
+	__u64	cpu_scaled_run_real_total; /* scaled cpu_run_real_total */
+
+	/* Delay waiting for memory reclaim */
+	__u64	freepages_count;
+	__u64	freepages_delay_total;
+};
+
+
+/*
+ * Commands sent from userspace
+ * Not versioned. New commands should only be inserted at the enum's end
+ * prior to __TASKSTATS_CMD_MAX
+ */
+
+enum {
+	TASKSTATS_CMD_UNSPEC = 0,	/* Reserved */
+	TASKSTATS_CMD_GET,		/* user->kernel request/get-response */
+	TASKSTATS_CMD_NEW,		/* kernel->user event */
+	__TASKSTATS_CMD_MAX,
+};
+
+#define TASKSTATS_CMD_MAX (__TASKSTATS_CMD_MAX - 1)
+
+enum {
+	TASKSTATS_TYPE_UNSPEC = 0,	/* Reserved */
+	TASKSTATS_TYPE_PID,		/* Process id */
+	TASKSTATS_TYPE_TGID,		/* Thread group id */
+	TASKSTATS_TYPE_STATS,		/* taskstats structure */
+	TASKSTATS_TYPE_AGGR_PID,	/* contains pid + stats */
+	TASKSTATS_TYPE_AGGR_TGID,	/* contains tgid + stats */
+	TASKSTATS_TYPE_NULL,		/* contains nothing */
+	__TASKSTATS_TYPE_MAX,
+};
+
+#define TASKSTATS_TYPE_MAX (__TASKSTATS_TYPE_MAX - 1)
+
+enum {
+	TASKSTATS_CMD_ATTR_UNSPEC = 0,
+	TASKSTATS_CMD_ATTR_PID,
+	TASKSTATS_CMD_ATTR_TGID,
+	TASKSTATS_CMD_ATTR_REGISTER_CPUMASK,
+	TASKSTATS_CMD_ATTR_DEREGISTER_CPUMASK,
+	__TASKSTATS_CMD_ATTR_MAX,
+};
+
+#define TASKSTATS_CMD_ATTR_MAX (__TASKSTATS_CMD_ATTR_MAX - 1)
+
+/* NETLINK_GENERIC related info */
+
+#define TASKSTATS_GENL_NAME	"TASKSTATS"
+#define TASKSTATS_GENL_VERSION	0x1
+
+#endif /* _LINUX_TASKSTATS_H */
diff --git a/include/linux/taskstats_kern.h b/include/linux/taskstats_kern.h
new file mode 100644
index 00000000..58de6edf
--- /dev/null
+++ b/include/linux/taskstats_kern.h
@@ -0,0 +1,36 @@
+/* taskstats_kern.h - kernel header for per-task statistics interface
+ *
+ * Copyright (C) Shailabh Nagar, IBM Corp. 2006
+ *           (C) Balbir Singh,   IBM Corp. 2006
+ */
+
+#ifndef _LINUX_TASKSTATS_KERN_H
+#define _LINUX_TASKSTATS_KERN_H
+
+#include <linux/taskstats.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+#ifdef CONFIG_TASKSTATS
+extern struct kmem_cache *taskstats_cache;
+extern struct mutex taskstats_exit_mutex;
+
+static inline void taskstats_tgid_free(struct signal_struct *sig)
+{
+	if (sig->stats)
+		kmem_cache_free(taskstats_cache, sig->stats);
+}
+
+extern void taskstats_exit(struct task_struct *, int group_dead);
+extern void taskstats_init_early(void);
+#else
+static inline void taskstats_exit(struct task_struct *tsk, int group_dead)
+{}
+static inline void taskstats_tgid_free(struct signal_struct *sig)
+{}
+static inline void taskstats_init_early(void)
+{}
+#endif /* CONFIG_TASKSTATS */
+
+#endif
+
diff --git a/include/linux/tboot.h b/include/linux/tboot.h
new file mode 100644
index 00000000..c75128be
--- /dev/null
+++ b/include/linux/tboot.h
@@ -0,0 +1,162 @@
+/*
+ * tboot.h: shared data structure with tboot and kernel and functions
+ *          used by kernel for runtime support of Intel(R) Trusted
+ *          Execution Technology
+ *
+ * Copyright (c) 2006-2009, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef _LINUX_TBOOT_H
+#define _LINUX_TBOOT_H
+
+/* these must have the values from 0-5 in this order */
+enum {
+	TB_SHUTDOWN_REBOOT = 0,
+	TB_SHUTDOWN_S5,
+	TB_SHUTDOWN_S4,
+	TB_SHUTDOWN_S3,
+	TB_SHUTDOWN_HALT,
+	TB_SHUTDOWN_WFS
+};
+
+#ifdef CONFIG_INTEL_TXT
+#include <acpi/acpi.h>
+/* used to communicate between tboot and the launched kernel */
+
+#define TB_KEY_SIZE             64   /* 512 bits */
+
+#define MAX_TB_MAC_REGIONS      32
+
+struct tboot_mac_region {
+	u64  start;         /* must be 64 byte -aligned */
+	u32  size;          /* must be 64 byte -granular */
+} __packed;
+
+/* GAS - Generic Address Structure (ACPI 2.0+) */
+struct tboot_acpi_generic_address {
+	u8  space_id;
+	u8  bit_width;
+	u8  bit_offset;
+	u8  access_width;
+	u64 address;
+} __packed;
+
+/*
+ * combines Sx info from FADT and FACS tables per ACPI 2.0+ spec
+ * (http://www.acpi.info/)
+ */
+struct tboot_acpi_sleep_info {
+	struct tboot_acpi_generic_address pm1a_cnt_blk;
+	struct tboot_acpi_generic_address pm1b_cnt_blk;
+	struct tboot_acpi_generic_address pm1a_evt_blk;
+	struct tboot_acpi_generic_address pm1b_evt_blk;
+	u16 pm1a_cnt_val;
+	u16 pm1b_cnt_val;
+	u64 wakeup_vector;
+	u32 vector_width;
+	u64 kernel_s3_resume_vector;
+} __packed;
+
+/*
+ * shared memory page used for communication between tboot and kernel
+ */
+struct tboot {
+	/*
+	 * version 3+ fields:
+	 */
+
+	/* TBOOT_UUID */
+	u8 uuid[16];
+
+	/* version number: 5 is current */
+	u32 version;
+
+	/* physical addr of tb_log_t log */
+	u32 log_addr;
+
+	/*
+	 * physical addr of entry point for tboot shutdown and
+	 * type of shutdown (TB_SHUTDOWN_*) being requested
+	 */
+	u32 shutdown_entry;
+	u32 shutdown_type;
+
+	/* kernel-specified ACPI info for Sx shutdown */
+	struct tboot_acpi_sleep_info acpi_sinfo;
+
+	/* tboot location in memory (physical) */
+	u32 tboot_base;
+	u32 tboot_size;
+
+	/* memory regions (phys addrs) for tboot to MAC on S3 */
+	u8 num_mac_regions;
+	struct tboot_mac_region mac_regions[MAX_TB_MAC_REGIONS];
+
+
+	/*
+	 * version 4+ fields:
+	 */
+
+	/* symmetric key for use by kernel; will be encrypted on S3 */
+	u8 s3_key[TB_KEY_SIZE];
+
+
+	/*
+	 * version 5+ fields:
+	 */
+
+	/* used to 4byte-align num_in_wfs */
+	u8 reserved_align[3];
+
+	/* number of processors in wait-for-SIPI */
+	u32 num_in_wfs;
+} __packed;
+
+/*
+ * UUID for tboot data struct to facilitate matching
+ * defined as {663C8DFF-E8B3-4b82-AABF-19EA4D057A08} by tboot, which is
+ * represented as {} in the char array used here
+ */
+#define TBOOT_UUID	{0xff, 0x8d, 0x3c, 0x66, 0xb3, 0xe8, 0x82, 0x4b, 0xbf,\
+			 0xaa, 0x19, 0xea, 0x4d, 0x5, 0x7a, 0x8}
+
+extern struct tboot *tboot;
+
+static inline int tboot_enabled(void)
+{
+	return tboot != NULL;
+}
+
+extern void tboot_probe(void);
+extern void tboot_shutdown(u32 shutdown_type);
+extern struct acpi_table_header *tboot_get_dmar_table(
+				      struct acpi_table_header *dmar_tbl);
+extern int tboot_force_iommu(void);
+
+#else
+
+#define tboot_enabled()			0
+#define tboot_probe()			do { } while (0)
+#define tboot_shutdown(shutdown_type)	do { } while (0)
+#define tboot_sleep(sleep_state, pm1a_control, pm1b_control)	\
+					do { } while (0)
+#define tboot_get_dmar_table(dmar_tbl)	(dmar_tbl)
+#define tboot_force_iommu()		0
+
+#endif /* !CONFIG_INTEL_TXT */
+
+#endif /* _LINUX_TBOOT_H */
diff --git a/include/linux/tc.h b/include/linux/tc.h
new file mode 100644
index 00000000..f92511e5
--- /dev/null
+++ b/include/linux/tc.h
@@ -0,0 +1,141 @@
+/*
+ *	Interface to the TURBOchannel related routines.
+ *
+ *	Copyright (c) 1998  Harald Koerfgen
+ *	Copyright (c) 2005  James Simmons
+ *	Copyright (c) 2006  Maciej W. Rozycki
+ *
+ *	Based on:
+ *
+ *	"TURBOchannel Firmware Specification", EK-TCAAD-FS-004
+ *
+ *	from Digital Equipment Corporation.
+ *
+ *	This file is subject to the terms and conditions of the GNU
+ *	General Public License.  See the file "COPYING" in the main
+ *	directory of this archive for more details.
+ */
+#ifndef _LINUX_TC_H
+#define _LINUX_TC_H
+
+#include <linux/compiler.h>
+#include <linux/device.h>
+#include <linux/ioport.h>
+#include <linux/types.h>
+
+/*
+ * Offsets for the ROM header locations for TURBOchannel cards.
+ */
+#define TC_OLDCARD	0x3c0000
+#define TC_NEWCARD	0x000000
+
+#define TC_ROM_WIDTH	0x3e0
+#define TC_ROM_STRIDE	0x3e4
+#define TC_ROM_SIZE	0x3e8
+#define TC_SLOT_SIZE	0x3ec
+#define TC_PATTERN0	0x3f0
+#define TC_PATTERN1	0x3f4
+#define TC_PATTERN2	0x3f8
+#define TC_PATTERN3	0x3fc
+#define TC_FIRM_VER	0x400
+#define TC_VENDOR	0x420
+#define TC_MODULE	0x440
+#define TC_FIRM_TYPE	0x460
+#define TC_FLAGS	0x470
+#define TC_ROM_OBJECTS	0x480
+
+/*
+ * Information obtained through the get_tcinfo() PROM call.
+ */
+struct tcinfo {
+	s32		revision;	/* Hardware revision level. */
+	s32		clk_period;	/* Clock period in nanoseconds. */
+	s32		slot_size;	/* Slot size in megabytes. */
+	s32		io_timeout;	/* I/O timeout in cycles. */
+	s32		dma_range;	/* DMA address range in megabytes. */
+	s32		max_dma_burst;	/* Maximum DMA burst length. */
+	s32		parity;		/* System module supports TC parity. */
+	s32		reserved[4];
+};
+
+/*
+ * TURBOchannel bus.
+ */
+struct tc_bus {
+	struct list_head devices;	/* List of devices on this bus. */
+	struct resource	resource[2];	/* Address space routed to this bus. */
+
+	struct device	dev;
+	char		name[13];
+	resource_size_t	slot_base;
+	resource_size_t	ext_slot_base;
+	resource_size_t	ext_slot_size;
+	int		num_tcslots;
+	struct tcinfo	info;
+};
+
+/*
+ * TURBOchannel device.
+ */
+struct tc_dev {
+	struct list_head node;		/* Node in list of all TC devices. */
+	struct tc_bus	*bus;		/* Bus this device is on. */
+	struct tc_driver *driver;	/* Which driver has allocated this
+					   device. */
+	struct device	dev;		/* Generic device interface. */
+	struct resource	resource;	/* Address space of this device. */
+	char		vendor[9];
+	char		name[9];
+	char		firmware[9];
+	int		interrupt;
+	int		slot;
+};
+
+#define to_tc_dev(n) container_of(n, struct tc_dev, dev)
+
+struct tc_device_id {
+	char		vendor[9];
+	char		name[9];
+};
+
+/*
+ * TURBOchannel driver.
+ */
+struct tc_driver {
+	struct list_head node;
+	const struct tc_device_id *id_table;
+	struct device_driver driver;
+};
+
+#define to_tc_driver(drv) container_of(drv, struct tc_driver, driver)
+
+/*
+ * Return TURBOchannel clock frequency in Hz.
+ */
+static inline unsigned long tc_get_speed(struct tc_bus *tbus)
+{
+	return 100000 * (10000 / (unsigned long)tbus->info.clk_period);
+}
+
+#ifdef CONFIG_TC
+
+extern struct bus_type tc_bus_type;
+
+extern int tc_register_driver(struct tc_driver *tdrv);
+extern void tc_unregister_driver(struct tc_driver *tdrv);
+
+#else /* !CONFIG_TC */
+
+static inline int tc_register_driver(struct tc_driver *tdrv) { return 0; }
+static inline void tc_unregister_driver(struct tc_driver *tdrv) { }
+
+#endif /* CONFIG_TC */
+
+/*
+ * These have to be provided by the architecture.
+ */
+extern int tc_preadb(u8 *valp, void __iomem *addr);
+extern int tc_bus_get_info(struct tc_bus *tbus);
+extern void tc_device_get_irq(struct tc_dev *tdev);
+
+#endif /* _LINUX_TC_H */
diff --git a/include/linux/tc_act/Kbuild b/include/linux/tc_act/Kbuild
new file mode 100644
index 00000000..67b501c3
--- /dev/null
+++ b/include/linux/tc_act/Kbuild
@@ -0,0 +1,7 @@
+header-y += tc_gact.h
+header-y += tc_ipt.h
+header-y += tc_mirred.h
+header-y += tc_pedit.h
+header-y += tc_nat.h
+header-y += tc_skbedit.h
+header-y += tc_csum.h
diff --git a/include/linux/tc_act/tc_csum.h b/include/linux/tc_act/tc_csum.h
new file mode 100644
index 00000000..a047c49a
--- /dev/null
+++ b/include/linux/tc_act/tc_csum.h
@@ -0,0 +1,32 @@
+#ifndef __LINUX_TC_CSUM_H
+#define __LINUX_TC_CSUM_H
+
+#include <linux/types.h>
+#include <linux/pkt_cls.h>
+
+#define TCA_ACT_CSUM 16
+
+enum {
+	TCA_CSUM_UNSPEC,
+	TCA_CSUM_PARMS,
+	TCA_CSUM_TM,
+	__TCA_CSUM_MAX
+};
+#define TCA_CSUM_MAX (__TCA_CSUM_MAX - 1)
+
+enum {
+	TCA_CSUM_UPDATE_FLAG_IPV4HDR = 1,
+	TCA_CSUM_UPDATE_FLAG_ICMP    = 2,
+	TCA_CSUM_UPDATE_FLAG_IGMP    = 4,
+	TCA_CSUM_UPDATE_FLAG_TCP     = 8,
+	TCA_CSUM_UPDATE_FLAG_UDP     = 16,
+	TCA_CSUM_UPDATE_FLAG_UDPLITE = 32
+};
+
+struct tc_csum {
+	tc_gen;
+
+	__u32 update_flags;
+};
+
+#endif /* __LINUX_TC_CSUM_H */
diff --git a/include/linux/tc_act/tc_defact.h b/include/linux/tc_act/tc_defact.h
new file mode 100644
index 00000000..6f65d07c
--- /dev/null
+++ b/include/linux/tc_act/tc_defact.h
@@ -0,0 +1,19 @@
+#ifndef __LINUX_TC_DEF_H
+#define __LINUX_TC_DEF_H
+
+#include <linux/pkt_cls.h>
+
+struct tc_defact {
+	tc_gen;
+};
+                                                                                
+enum {
+	TCA_DEF_UNSPEC,
+	TCA_DEF_TM,
+	TCA_DEF_PARMS,
+	TCA_DEF_DATA,
+	__TCA_DEF_MAX
+};
+#define TCA_DEF_MAX (__TCA_DEF_MAX - 1)
+
+#endif
diff --git a/include/linux/tc_act/tc_gact.h b/include/linux/tc_act/tc_gact.h
new file mode 100644
index 00000000..f7bf94ee
--- /dev/null
+++ b/include/linux/tc_act/tc_gact.h
@@ -0,0 +1,32 @@
+#ifndef __LINUX_TC_GACT_H
+#define __LINUX_TC_GACT_H
+
+#include <linux/types.h>
+#include <linux/pkt_cls.h>
+
+#define TCA_ACT_GACT 5
+struct tc_gact {
+	tc_gen;
+
+};
+
+struct tc_gact_p {
+#define PGACT_NONE              0
+#define PGACT_NETRAND           1
+#define PGACT_DETERM            2
+#define MAX_RAND                (PGACT_DETERM + 1 )
+	__u16                 ptype;
+	__u16                 pval;
+	int                   paction;
+};
+ 
+enum {
+	TCA_GACT_UNSPEC,
+	TCA_GACT_TM,
+	TCA_GACT_PARMS,
+	TCA_GACT_PROB,
+	__TCA_GACT_MAX
+};
+#define TCA_GACT_MAX (__TCA_GACT_MAX - 1)
+ 
+#endif
diff --git a/include/linux/tc_act/tc_ipt.h b/include/linux/tc_act/tc_ipt.h
new file mode 100644
index 00000000..a2335563
--- /dev/null
+++ b/include/linux/tc_act/tc_ipt.h
@@ -0,0 +1,20 @@
+#ifndef __LINUX_TC_IPT_H
+#define __LINUX_TC_IPT_H
+
+#include <linux/pkt_cls.h>
+
+#define TCA_ACT_IPT 6
+
+enum {
+	TCA_IPT_UNSPEC,
+	TCA_IPT_TABLE,
+	TCA_IPT_HOOK,
+	TCA_IPT_INDEX,
+	TCA_IPT_CNT,
+	TCA_IPT_TM,
+	TCA_IPT_TARG,
+	__TCA_IPT_MAX
+};
+#define TCA_IPT_MAX (__TCA_IPT_MAX - 1)
+                                                                                
+#endif
diff --git a/include/linux/tc_act/tc_mirred.h b/include/linux/tc_act/tc_mirred.h
new file mode 100644
index 00000000..7561750e
--- /dev/null
+++ b/include/linux/tc_act/tc_mirred.h
@@ -0,0 +1,27 @@
+#ifndef __LINUX_TC_MIR_H
+#define __LINUX_TC_MIR_H
+
+#include <linux/types.h>
+#include <linux/pkt_cls.h>
+
+#define TCA_ACT_MIRRED 8
+#define TCA_EGRESS_REDIR 1  /* packet redirect to EGRESS*/
+#define TCA_EGRESS_MIRROR 2 /* mirror packet to EGRESS */
+#define TCA_INGRESS_REDIR 3  /* packet redirect to INGRESS*/
+#define TCA_INGRESS_MIRROR 4 /* mirror packet to INGRESS */
+                                                                                
+struct tc_mirred {
+	tc_gen;
+	int                     eaction;   /* one of IN/EGRESS_MIRROR/REDIR */
+	__u32                   ifindex;  /* ifindex of egress port */
+};
+                                                                                
+enum {
+	TCA_MIRRED_UNSPEC,
+	TCA_MIRRED_TM,
+	TCA_MIRRED_PARMS,
+	__TCA_MIRRED_MAX
+};
+#define TCA_MIRRED_MAX (__TCA_MIRRED_MAX - 1)
+                                                                                
+#endif
diff --git a/include/linux/tc_act/tc_nat.h b/include/linux/tc_act/tc_nat.h
new file mode 100644
index 00000000..6663aeba
--- /dev/null
+++ b/include/linux/tc_act/tc_nat.h
@@ -0,0 +1,27 @@
+#ifndef __LINUX_TC_NAT_H
+#define __LINUX_TC_NAT_H
+
+#include <linux/pkt_cls.h>
+#include <linux/types.h>
+
+#define TCA_ACT_NAT 9
+
+enum {
+	TCA_NAT_UNSPEC,
+	TCA_NAT_PARMS,
+	TCA_NAT_TM,
+	__TCA_NAT_MAX
+};
+#define TCA_NAT_MAX (__TCA_NAT_MAX - 1)
+
+#define TCA_NAT_FLAG_EGRESS 1
+
+struct tc_nat {
+	tc_gen;
+	__be32 old_addr;
+	__be32 new_addr;
+	__be32 mask;
+	__u32 flags;
+};
+
+#endif
diff --git a/include/linux/tc_act/tc_pedit.h b/include/linux/tc_act/tc_pedit.h
new file mode 100644
index 00000000..716cfabc
--- /dev/null
+++ b/include/linux/tc_act/tc_pedit.h
@@ -0,0 +1,34 @@
+#ifndef __LINUX_TC_PED_H
+#define __LINUX_TC_PED_H
+
+#include <linux/types.h>
+#include <linux/pkt_cls.h>
+
+#define TCA_ACT_PEDIT 7
+
+enum {
+	TCA_PEDIT_UNSPEC,
+	TCA_PEDIT_TM,
+	TCA_PEDIT_PARMS,
+	__TCA_PEDIT_MAX
+};
+#define TCA_PEDIT_MAX (__TCA_PEDIT_MAX - 1)
+                                                                                
+struct tc_pedit_key {
+	__u32           mask;  /* AND */
+	__u32           val;   /*XOR */
+	__u32           off;  /*offset */
+	__u32           at;
+	__u32           offmask;
+	__u32           shift;
+};
+                                                                                
+struct tc_pedit_sel {
+	tc_gen;
+	unsigned char           nkeys;
+	unsigned char           flags;
+	struct tc_pedit_key     keys[0];
+};
+#define tc_pedit tc_pedit_sel
+
+#endif
diff --git a/include/linux/tc_act/tc_skbedit.h b/include/linux/tc_act/tc_skbedit.h
new file mode 100644
index 00000000..7a2e910a
--- /dev/null
+++ b/include/linux/tc_act/tc_skbedit.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (c) 2008, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * Author: Alexander Duyck <alexander.h.duyck@intel.com>
+ */
+
+#ifndef __LINUX_TC_SKBEDIT_H
+#define __LINUX_TC_SKBEDIT_H
+
+#include <linux/pkt_cls.h>
+
+#define TCA_ACT_SKBEDIT 11
+
+#define SKBEDIT_F_PRIORITY		0x1
+#define SKBEDIT_F_QUEUE_MAPPING		0x2
+#define SKBEDIT_F_MARK			0x4
+
+struct tc_skbedit {
+	tc_gen;
+};
+
+enum {
+	TCA_SKBEDIT_UNSPEC,
+	TCA_SKBEDIT_TM,
+	TCA_SKBEDIT_PARMS,
+	TCA_SKBEDIT_PRIORITY,
+	TCA_SKBEDIT_QUEUE_MAPPING,
+	TCA_SKBEDIT_MARK,
+	__TCA_SKBEDIT_MAX
+};
+#define TCA_SKBEDIT_MAX (__TCA_SKBEDIT_MAX - 1)
+
+#endif
diff --git a/include/linux/tc_ematch/Kbuild b/include/linux/tc_ematch/Kbuild
new file mode 100644
index 00000000..4a58a1c3
--- /dev/null
+++ b/include/linux/tc_ematch/Kbuild
@@ -0,0 +1,4 @@
+header-y += tc_em_cmp.h
+header-y += tc_em_meta.h
+header-y += tc_em_nbyte.h
+header-y += tc_em_text.h
diff --git a/include/linux/tc_ematch/tc_em_cmp.h b/include/linux/tc_ematch/tc_em_cmp.h
new file mode 100644
index 00000000..f34bb1ba
--- /dev/null
+++ b/include/linux/tc_ematch/tc_em_cmp.h
@@ -0,0 +1,25 @@
+#ifndef __LINUX_TC_EM_CMP_H
+#define __LINUX_TC_EM_CMP_H
+
+#include <linux/types.h>
+#include <linux/pkt_cls.h>
+
+struct tcf_em_cmp {
+	__u32		val;
+	__u32		mask;
+	__u16		off;
+	__u8		align:4;
+	__u8		flags:4;
+	__u8		layer:4;
+	__u8		opnd:4;
+};
+
+enum {
+	TCF_EM_ALIGN_U8  = 1,
+	TCF_EM_ALIGN_U16 = 2,
+	TCF_EM_ALIGN_U32 = 4
+};
+
+#define TCF_EM_CMP_TRANS	1
+
+#endif
diff --git a/include/linux/tc_ematch/tc_em_meta.h b/include/linux/tc_ematch/tc_em_meta.h
new file mode 100644
index 00000000..b11f8ce2
--- /dev/null
+++ b/include/linux/tc_ematch/tc_em_meta.h
@@ -0,0 +1,92 @@
+#ifndef __LINUX_TC_EM_META_H
+#define __LINUX_TC_EM_META_H
+
+#include <linux/types.h>
+#include <linux/pkt_cls.h>
+
+enum {
+	TCA_EM_META_UNSPEC,
+	TCA_EM_META_HDR,
+	TCA_EM_META_LVALUE,
+	TCA_EM_META_RVALUE,
+	__TCA_EM_META_MAX
+};
+#define TCA_EM_META_MAX (__TCA_EM_META_MAX - 1)
+
+struct tcf_meta_val {
+	__u16			kind;
+	__u8			shift;
+	__u8			op;
+};
+
+#define TCF_META_TYPE_MASK	(0xf << 12)
+#define TCF_META_TYPE(kind)	(((kind) & TCF_META_TYPE_MASK) >> 12)
+#define TCF_META_ID_MASK	0x7ff
+#define TCF_META_ID(kind)	((kind) & TCF_META_ID_MASK)
+
+enum {
+	TCF_META_TYPE_VAR,
+	TCF_META_TYPE_INT,
+	__TCF_META_TYPE_MAX
+};
+#define TCF_META_TYPE_MAX (__TCF_META_TYPE_MAX - 1)
+
+enum {
+	TCF_META_ID_VALUE,
+	TCF_META_ID_RANDOM,
+	TCF_META_ID_LOADAVG_0,
+	TCF_META_ID_LOADAVG_1,
+	TCF_META_ID_LOADAVG_2,
+	TCF_META_ID_DEV,
+	TCF_META_ID_PRIORITY,
+	TCF_META_ID_PROTOCOL,
+	TCF_META_ID_PKTTYPE,
+	TCF_META_ID_PKTLEN,
+	TCF_META_ID_DATALEN,
+	TCF_META_ID_MACLEN,
+	TCF_META_ID_NFMARK,
+	TCF_META_ID_TCINDEX,
+	TCF_META_ID_RTCLASSID,
+	TCF_META_ID_RTIIF,
+	TCF_META_ID_SK_FAMILY,
+	TCF_META_ID_SK_STATE,
+	TCF_META_ID_SK_REUSE,
+	TCF_META_ID_SK_BOUND_IF,
+	TCF_META_ID_SK_REFCNT,
+	TCF_META_ID_SK_SHUTDOWN,
+	TCF_META_ID_SK_PROTO,
+	TCF_META_ID_SK_TYPE,
+	TCF_META_ID_SK_RCVBUF,
+	TCF_META_ID_SK_RMEM_ALLOC,
+	TCF_META_ID_SK_WMEM_ALLOC,
+	TCF_META_ID_SK_OMEM_ALLOC,
+	TCF_META_ID_SK_WMEM_QUEUED,
+	TCF_META_ID_SK_RCV_QLEN,
+	TCF_META_ID_SK_SND_QLEN,
+ 	TCF_META_ID_SK_ERR_QLEN,
+	TCF_META_ID_SK_FORWARD_ALLOCS,
+	TCF_META_ID_SK_SNDBUF,
+ 	TCF_META_ID_SK_ALLOCS,
+	__TCF_META_ID_SK_ROUTE_CAPS,	/* unimplemented but in ABI already */
+ 	TCF_META_ID_SK_HASH,
+ 	TCF_META_ID_SK_LINGERTIME,
+ 	TCF_META_ID_SK_ACK_BACKLOG,
+ 	TCF_META_ID_SK_MAX_ACK_BACKLOG,
+ 	TCF_META_ID_SK_PRIO,
+ 	TCF_META_ID_SK_RCVLOWAT,
+ 	TCF_META_ID_SK_RCVTIMEO,
+ 	TCF_META_ID_SK_SNDTIMEO,
+ 	TCF_META_ID_SK_SENDMSG_OFF,
+ 	TCF_META_ID_SK_WRITE_PENDING,
+	TCF_META_ID_VLAN_TAG,
+	TCF_META_ID_RXHASH,
+	__TCF_META_ID_MAX
+};
+#define TCF_META_ID_MAX (__TCF_META_ID_MAX - 1)
+
+struct tcf_meta_hdr {
+	struct tcf_meta_val	left;
+	struct tcf_meta_val	right;
+};
+
+#endif
diff --git a/include/linux/tc_ematch/tc_em_nbyte.h b/include/linux/tc_ematch/tc_em_nbyte.h
new file mode 100644
index 00000000..7172cfb9
--- /dev/null
+++ b/include/linux/tc_ematch/tc_em_nbyte.h
@@ -0,0 +1,13 @@
+#ifndef __LINUX_TC_EM_NBYTE_H
+#define __LINUX_TC_EM_NBYTE_H
+
+#include <linux/types.h>
+#include <linux/pkt_cls.h>
+
+struct tcf_em_nbyte {
+	__u16		off;
+	__u16		len:12;
+	__u8		layer:4;
+};
+
+#endif
diff --git a/include/linux/tc_ematch/tc_em_text.h b/include/linux/tc_ematch/tc_em_text.h
new file mode 100644
index 00000000..5aac4045
--- /dev/null
+++ b/include/linux/tc_ematch/tc_em_text.h
@@ -0,0 +1,19 @@
+#ifndef __LINUX_TC_EM_TEXT_H
+#define __LINUX_TC_EM_TEXT_H
+
+#include <linux/types.h>
+#include <linux/pkt_cls.h>
+
+#define TC_EM_TEXT_ALGOSIZ	16
+
+struct tcf_em_text {
+	char		algo[TC_EM_TEXT_ALGOSIZ];
+	__u16		from_offset;
+	__u16		to_offset;
+	__u16		pattern_len;
+	__u8		from_layer:4;
+	__u8		to_layer:4;
+	__u8		pad;
+};
+
+#endif
diff --git a/include/linux/tca6416_keypad.h b/include/linux/tca6416_keypad.h
new file mode 100644
index 00000000..7bd266f3
--- /dev/null
+++ b/include/linux/tca6416_keypad.h
@@ -0,0 +1,34 @@
+/*
+ * tca6416 keypad platform support
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * Author: Sriramakrishnan <srk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _TCA6416_KEYS_H
+#define _TCA6416_KEYS_H
+
+#include <linux/types.h>
+
+struct tca6416_button {
+	/* Configuration parameters */
+	int code;		/* input event code (KEY_*, SW_*) */
+	int active_low;
+	int type;		/* input event type (EV_KEY, EV_SW) */
+};
+
+struct tca6416_keys_platform_data {
+	struct tca6416_button *buttons;
+	int nbuttons;
+	unsigned int rep:1;	/* enable input subsystem auto repeat */
+	uint16_t pinmask;
+	uint16_t invert;
+	int irq_is_gpio;
+	int use_polling;	/* use polling if Interrupt is not connected*/
+};
+#endif
diff --git a/include/linux/tcp.h b/include/linux/tcp.h
new file mode 100644
index 00000000..b6c62d29
--- /dev/null
+++ b/include/linux/tcp.h
@@ -0,0 +1,505 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the TCP protocol.
+ *
+ * Version:	@(#)tcp.h	1.0.2	04/28/93
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_TCP_H
+#define _LINUX_TCP_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include <linux/socket.h>
+
+struct tcphdr {
+	__be16	source;
+	__be16	dest;
+	__be32	seq;
+	__be32	ack_seq;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u16	res1:4,
+		doff:4,
+		fin:1,
+		syn:1,
+		rst:1,
+		psh:1,
+		ack:1,
+		urg:1,
+		ece:1,
+		cwr:1;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u16	doff:4,
+		res1:4,
+		cwr:1,
+		ece:1,
+		urg:1,
+		ack:1,
+		psh:1,
+		rst:1,
+		syn:1,
+		fin:1;
+#else
+#error	"Adjust your <asm/byteorder.h> defines"
+#endif	
+	__be16	window;
+	__sum16	check;
+	__be16	urg_ptr;
+};
+
+/*
+ *	The union cast uses a gcc extension to avoid aliasing problems
+ *  (union is compatible to any of its members)
+ *  This means this part of the code is -fstrict-aliasing safe now.
+ */
+union tcp_word_hdr { 
+	struct tcphdr hdr;
+	__be32 		  words[5];
+}; 
+
+#define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) 
+
+enum { 
+	TCP_FLAG_CWR = __cpu_to_be32(0x00800000),
+	TCP_FLAG_ECE = __cpu_to_be32(0x00400000),
+	TCP_FLAG_URG = __cpu_to_be32(0x00200000),
+	TCP_FLAG_ACK = __cpu_to_be32(0x00100000),
+	TCP_FLAG_PSH = __cpu_to_be32(0x00080000),
+	TCP_FLAG_RST = __cpu_to_be32(0x00040000),
+	TCP_FLAG_SYN = __cpu_to_be32(0x00020000),
+	TCP_FLAG_FIN = __cpu_to_be32(0x00010000),
+	TCP_RESERVED_BITS = __cpu_to_be32(0x0F000000),
+	TCP_DATA_OFFSET = __cpu_to_be32(0xF0000000)
+}; 
+
+/*
+ * TCP general constants
+ */
+#define TCP_MSS_DEFAULT		 536U	/* IPv4 (RFC1122, RFC2581) */
+#define TCP_MSS_DESIRED		1220U	/* IPv6 (tunneled), EDNS0 (RFC3226) */
+
+/* TCP socket options */
+#define TCP_NODELAY		1	/* Turn off Nagle's algorithm. */
+#define TCP_MAXSEG		2	/* Limit MSS */
+#define TCP_CORK		3	/* Never send partially complete segments */
+#define TCP_KEEPIDLE		4	/* Start keeplives after this period */
+#define TCP_KEEPINTVL		5	/* Interval between keepalives */
+#define TCP_KEEPCNT		6	/* Number of keepalives before death */
+#define TCP_SYNCNT		7	/* Number of SYN retransmits */
+#define TCP_LINGER2		8	/* Life time of orphaned FIN-WAIT-2 state */
+#define TCP_DEFER_ACCEPT	9	/* Wake up listener only when data arrive */
+#define TCP_WINDOW_CLAMP	10	/* Bound advertised window */
+#define TCP_INFO		11	/* Information about this connection. */
+#define TCP_QUICKACK		12	/* Block/reenable quick acks */
+#define TCP_CONGESTION		13	/* Congestion control algorithm */
+#define TCP_MD5SIG		14	/* TCP MD5 Signature (RFC2385) */
+#define TCP_COOKIE_TRANSACTIONS	15	/* TCP Cookie Transactions */
+#define TCP_THIN_LINEAR_TIMEOUTS 16      /* Use linear timeouts for thin streams*/
+#define TCP_THIN_DUPACK         17      /* Fast retrans. after 1 dupack */
+#define TCP_USER_TIMEOUT	18	/* How long for loss retry before timeout */
+
+/* for TCP_INFO socket option */
+#define TCPI_OPT_TIMESTAMPS	1
+#define TCPI_OPT_SACK		2
+#define TCPI_OPT_WSCALE		4
+#define TCPI_OPT_ECN		8 /* ECN was negociated at TCP session init */
+#define TCPI_OPT_ECN_SEEN	16 /* we received at least one packet with ECT */
+
+enum tcp_ca_state {
+	TCP_CA_Open = 0,
+#define TCPF_CA_Open	(1<<TCP_CA_Open)
+	TCP_CA_Disorder = 1,
+#define TCPF_CA_Disorder (1<<TCP_CA_Disorder)
+	TCP_CA_CWR = 2,
+#define TCPF_CA_CWR	(1<<TCP_CA_CWR)
+	TCP_CA_Recovery = 3,
+#define TCPF_CA_Recovery (1<<TCP_CA_Recovery)
+	TCP_CA_Loss = 4
+#define TCPF_CA_Loss	(1<<TCP_CA_Loss)
+};
+
+struct tcp_info {
+	__u8	tcpi_state;
+	__u8	tcpi_ca_state;
+	__u8	tcpi_retransmits;
+	__u8	tcpi_probes;
+	__u8	tcpi_backoff;
+	__u8	tcpi_options;
+	__u8	tcpi_snd_wscale : 4, tcpi_rcv_wscale : 4;
+
+	__u32	tcpi_rto;
+	__u32	tcpi_ato;
+	__u32	tcpi_snd_mss;
+	__u32	tcpi_rcv_mss;
+
+	__u32	tcpi_unacked;
+	__u32	tcpi_sacked;
+	__u32	tcpi_lost;
+	__u32	tcpi_retrans;
+	__u32	tcpi_fackets;
+
+	/* Times. */
+	__u32	tcpi_last_data_sent;
+	__u32	tcpi_last_ack_sent;     /* Not remembered, sorry. */
+	__u32	tcpi_last_data_recv;
+	__u32	tcpi_last_ack_recv;
+
+	/* Metrics. */
+	__u32	tcpi_pmtu;
+	__u32	tcpi_rcv_ssthresh;
+	__u32	tcpi_rtt;
+	__u32	tcpi_rttvar;
+	__u32	tcpi_snd_ssthresh;
+	__u32	tcpi_snd_cwnd;
+	__u32	tcpi_advmss;
+	__u32	tcpi_reordering;
+
+	__u32	tcpi_rcv_rtt;
+	__u32	tcpi_rcv_space;
+
+	__u32	tcpi_total_retrans;
+};
+
+/* for TCP_MD5SIG socket option */
+#define TCP_MD5SIG_MAXKEYLEN	80
+
+struct tcp_md5sig {
+	struct __kernel_sockaddr_storage tcpm_addr;	/* address associated */
+	__u16	__tcpm_pad1;				/* zero */
+	__u16	tcpm_keylen;				/* key length */
+	__u32	__tcpm_pad2;				/* zero */
+	__u8	tcpm_key[TCP_MD5SIG_MAXKEYLEN];		/* key (binary) */
+};
+
+/* for TCP_COOKIE_TRANSACTIONS (TCPCT) socket option */
+#define TCP_COOKIE_MIN		 8		/*  64-bits */
+#define TCP_COOKIE_MAX		16		/* 128-bits */
+#define TCP_COOKIE_PAIR_SIZE	(2*TCP_COOKIE_MAX)
+
+/* Flags for both getsockopt and setsockopt */
+#define TCP_COOKIE_IN_ALWAYS	(1 << 0)	/* Discard SYN without cookie */
+#define TCP_COOKIE_OUT_NEVER	(1 << 1)	/* Prohibit outgoing cookies,
+						 * supercedes everything. */
+
+/* Flags for getsockopt */
+#define TCP_S_DATA_IN		(1 << 2)	/* Was data received? */
+#define TCP_S_DATA_OUT		(1 << 3)	/* Was data sent? */
+
+/* TCP_COOKIE_TRANSACTIONS data */
+struct tcp_cookie_transactions {
+	__u16	tcpct_flags;			/* see above */
+	__u8	__tcpct_pad1;			/* zero */
+	__u8	tcpct_cookie_desired;		/* bytes */
+	__u16	tcpct_s_data_desired;		/* bytes of variable data */
+	__u16	tcpct_used;			/* bytes in value */
+	__u8	tcpct_value[TCP_MSS_DEFAULT];
+};
+
+#ifdef __KERNEL__
+
+#include <linux/skbuff.h>
+#include <linux/dmaengine.h>
+#include <net/sock.h>
+#include <net/inet_connection_sock.h>
+#include <net/inet_timewait_sock.h>
+
+static inline struct tcphdr *tcp_hdr(const struct sk_buff *skb)
+{
+	return (struct tcphdr *)skb_transport_header(skb);
+}
+
+static inline unsigned int tcp_hdrlen(const struct sk_buff *skb)
+{
+	return tcp_hdr(skb)->doff * 4;
+}
+
+static inline unsigned int tcp_optlen(const struct sk_buff *skb)
+{
+	return (tcp_hdr(skb)->doff - 5) * 4;
+}
+
+/* This defines a selective acknowledgement block. */
+struct tcp_sack_block_wire {
+	__be32	start_seq;
+	__be32	end_seq;
+};
+
+struct tcp_sack_block {
+	u32	start_seq;
+	u32	end_seq;
+};
+
+/*These are used to set the sack_ok field in struct tcp_options_received */
+#define TCP_SACK_SEEN     (1 << 0)   /*1 = peer is SACK capable, */
+#define TCP_FACK_ENABLED  (1 << 1)   /*1 = FACK is enabled locally*/
+#define TCP_DSACK_SEEN    (1 << 2)   /*1 = DSACK was received from peer*/
+
+struct tcp_options_received {
+/*	PAWS/RTTM data	*/
+	long	ts_recent_stamp;/* Time we stored ts_recent (for aging) */
+	u32	ts_recent;	/* Time stamp to echo next		*/
+	u32	rcv_tsval;	/* Time stamp value             	*/
+	u32	rcv_tsecr;	/* Time stamp echo reply        	*/
+	u16 	saw_tstamp : 1,	/* Saw TIMESTAMP on last packet		*/
+		tstamp_ok : 1,	/* TIMESTAMP seen on SYN packet		*/
+		dsack : 1,	/* D-SACK is scheduled			*/
+		wscale_ok : 1,	/* Wscale seen on SYN packet		*/
+		sack_ok : 4,	/* SACK seen on SYN packet		*/
+		snd_wscale : 4,	/* Window scaling received from sender	*/
+		rcv_wscale : 4;	/* Window scaling to send to receiver	*/
+	u8	cookie_plus:6,	/* bytes in authenticator/cookie option	*/
+		cookie_out_never:1,
+		cookie_in_always:1;
+	u8	num_sacks;	/* Number of SACK blocks		*/
+	u16	user_mss;	/* mss requested by user in ioctl	*/
+	u16	mss_clamp;	/* Maximal mss, negotiated at connection setup */
+};
+
+static inline void tcp_clear_options(struct tcp_options_received *rx_opt)
+{
+	rx_opt->tstamp_ok = rx_opt->sack_ok = 0;
+	rx_opt->wscale_ok = rx_opt->snd_wscale = 0;
+	rx_opt->cookie_plus = 0;
+}
+
+/* This is the max number of SACKS that we'll generate and process. It's safe
+ * to increase this, although since:
+ *   size = TCPOLEN_SACK_BASE_ALIGNED (4) + n * TCPOLEN_SACK_PERBLOCK (8)
+ * only four options will fit in a standard TCP header */
+#define TCP_NUM_SACKS 4
+
+struct tcp_cookie_values;
+struct tcp_request_sock_ops;
+
+struct tcp_request_sock {
+	struct inet_request_sock 	req;
+#ifdef CONFIG_TCP_MD5SIG
+	/* Only used by TCP MD5 Signature so far. */
+	const struct tcp_request_sock_ops *af_specific;
+#endif
+	u32				rcv_isn;
+	u32				snt_isn;
+	u32				snt_synack; /* synack sent time */
+};
+
+static inline struct tcp_request_sock *tcp_rsk(const struct request_sock *req)
+{
+	return (struct tcp_request_sock *)req;
+}
+
+struct tcp_sock {
+	/* inet_connection_sock has to be the first member of tcp_sock */
+	struct inet_connection_sock	inet_conn;
+	u16	tcp_header_len;	/* Bytes of tcp header to send		*/
+	u16	xmit_size_goal_segs; /* Goal for segmenting output packets */
+
+/*
+ *	Header prediction flags
+ *	0x5?10 << 16 + snd_wnd in net byte order
+ */
+	__be32	pred_flags;
+
+/*
+ *	RFC793 variables by their proper names. This means you can
+ *	read the code and the spec side by side (and laugh ...)
+ *	See RFC793 and RFC1122. The RFC writes these in capitals.
+ */
+ 	u32	rcv_nxt;	/* What we want to receive next 	*/
+	u32	copied_seq;	/* Head of yet unread data		*/
+	u32	rcv_wup;	/* rcv_nxt on last window update sent	*/
+ 	u32	snd_nxt;	/* Next sequence we send		*/
+
+ 	u32	snd_una;	/* First byte we want an ack for	*/
+ 	u32	snd_sml;	/* Last byte of the most recently transmitted small packet */
+	u32	rcv_tstamp;	/* timestamp of last received ACK (for keepalives) */
+	u32	lsndtime;	/* timestamp of last sent data packet (for restart window) */
+
+	/* Data for direct copy to user */
+	struct {
+		struct sk_buff_head	prequeue;
+		struct task_struct	*task;
+		struct iovec		*iov;
+		int			memory;
+		int			len;
+#ifdef CONFIG_NET_DMA
+		/* members for async copy */
+		struct dma_chan		*dma_chan;
+		int			wakeup;
+		struct dma_pinned_list	*pinned_list;
+		dma_cookie_t		dma_cookie;
+#endif
+	} ucopy;
+
+	u32	snd_wl1;	/* Sequence for window update		*/
+	u32	snd_wnd;	/* The window we expect to receive	*/
+	u32	max_window;	/* Maximal window ever seen from peer	*/
+	u32	mss_cache;	/* Cached effective mss, not including SACKS */
+
+	u32	window_clamp;	/* Maximal window to advertise		*/
+	u32	rcv_ssthresh;	/* Current window clamp			*/
+
+	u32	frto_highmark;	/* snd_nxt when RTO occurred */
+	u16	advmss;		/* Advertised MSS			*/
+	u8	frto_counter;	/* Number of new acks after RTO */
+	u8	nonagle     : 4,/* Disable Nagle algorithm?             */
+		thin_lto    : 1,/* Use linear timeouts for thin streams */
+		thin_dupack : 1,/* Fast retransmit on first dupack      */
+		unused      : 2;
+
+/* RTT measurement */
+	u32	srtt;		/* smoothed round trip time << 3	*/
+	u32	mdev;		/* medium deviation			*/
+	u32	mdev_max;	/* maximal mdev for the last rtt period	*/
+	u32	rttvar;		/* smoothed mdev_max			*/
+	u32	rtt_seq;	/* sequence number to update rttvar	*/
+
+	u32	packets_out;	/* Packets which are "in flight"	*/
+	u32	retrans_out;	/* Retransmitted packets out		*/
+
+	u16	urg_data;	/* Saved octet of OOB data and control flags */
+	u8	ecn_flags;	/* ECN status bits.			*/
+	u8	reordering;	/* Packet reordering metric.		*/
+	u32	snd_up;		/* Urgent pointer		*/
+
+	u8	keepalive_probes; /* num of allowed keep alive probes	*/
+/*
+ *      Options received (usually on last packet, some only on SYN packets).
+ */
+	struct tcp_options_received rx_opt;
+
+/*
+ *	Slow start and congestion control (see also Nagle, and Karn & Partridge)
+ */
+ 	u32	snd_ssthresh;	/* Slow start size threshold		*/
+ 	u32	snd_cwnd;	/* Sending congestion window		*/
+	u32	snd_cwnd_cnt;	/* Linear increase counter		*/
+	u32	snd_cwnd_clamp; /* Do not allow snd_cwnd to grow above this */
+	u32	snd_cwnd_used;
+	u32	snd_cwnd_stamp;
+	u32	prior_cwnd;	/* Congestion window at start of Recovery. */
+	u32	prr_delivered;	/* Number of newly delivered packets to
+				 * receiver in Recovery. */
+	u32	prr_out;	/* Total number of pkts sent during Recovery. */
+
+ 	u32	rcv_wnd;	/* Current receiver window		*/
+	u32	write_seq;	/* Tail(+1) of data held in tcp send buffer */
+	u32	pushed_seq;	/* Last pushed seq, required to talk to windows */
+	u32	lost_out;	/* Lost packets			*/
+	u32	sacked_out;	/* SACK'd packets			*/
+	u32	fackets_out;	/* FACK'd packets			*/
+	u32	tso_deferred;
+	u32	bytes_acked;	/* Appropriate Byte Counting - RFC3465 */
+
+	/* from STCP, retrans queue hinting */
+	struct sk_buff* lost_skb_hint;
+	struct sk_buff *scoreboard_skb_hint;
+	struct sk_buff *retransmit_skb_hint;
+
+	struct sk_buff_head	out_of_order_queue; /* Out of order segments go here */
+
+	/* SACKs data, these 2 need to be together (see tcp_build_and_update_options) */
+	struct tcp_sack_block duplicate_sack[1]; /* D-SACK block */
+	struct tcp_sack_block selective_acks[4]; /* The SACKS themselves*/
+
+	struct tcp_sack_block recv_sack_cache[4];
+
+	struct sk_buff *highest_sack;   /* skb just after the highest
+					 * skb with SACKed bit set
+					 * (validity guaranteed only if
+					 * sacked_out > 0)
+					 */
+
+	int     lost_cnt_hint;
+	u32     retransmit_high;	/* L-bits may be on up to this seqno */
+
+	u32	lost_retrans_low;	/* Sent seq after any rxmit (lowest) */
+
+	u32	prior_ssthresh; /* ssthresh saved at recovery start	*/
+	u32	high_seq;	/* snd_nxt at onset of congestion	*/
+
+	u32	retrans_stamp;	/* Timestamp of the last retransmit,
+				 * also used in SYN-SENT to remember stamp of
+				 * the first SYN. */
+	u32	undo_marker;	/* tracking retrans started here. */
+	int	undo_retrans;	/* number of undoable retransmissions. */
+	u32	total_retrans;	/* Total retransmits for entire connection */
+
+	u32	urg_seq;	/* Seq of received urgent pointer */
+	unsigned int		keepalive_time;	  /* time before keep alive takes place */
+	unsigned int		keepalive_intvl;  /* time interval between keep alive probes */
+
+	int			linger2;
+
+/* Receiver side RTT estimation */
+	struct {
+		u32	rtt;
+		u32	seq;
+		u32	time;
+	} rcv_rtt_est;
+
+/* Receiver queue space */
+	struct {
+		int	space;
+		u32	seq;
+		u32	time;
+	} rcvq_space;
+
+/* TCP-specific MTU probe information. */
+	struct {
+		u32		  probe_seq_start;
+		u32		  probe_seq_end;
+	} mtu_probe;
+
+#ifdef CONFIG_TCP_MD5SIG
+/* TCP AF-Specific parts; only used by MD5 Signature support so far */
+	const struct tcp_sock_af_ops	*af_specific;
+
+/* TCP MD5 Signature Option information */
+	struct tcp_md5sig_info	__rcu *md5sig_info;
+#endif
+
+	/* When the cookie options are generated and exchanged, then this
+	 * object holds a reference to them (cookie_values->kref).  Also
+	 * contains related tcp_cookie_transactions fields.
+	 */
+	struct tcp_cookie_values  *cookie_values;
+};
+
+static inline struct tcp_sock *tcp_sk(const struct sock *sk)
+{
+	return (struct tcp_sock *)sk;
+}
+
+struct tcp_timewait_sock {
+	struct inet_timewait_sock tw_sk;
+	u32			  tw_rcv_nxt;
+	u32			  tw_snd_nxt;
+	u32			  tw_rcv_wnd;
+	u32			  tw_ts_recent;
+	long			  tw_ts_recent_stamp;
+#ifdef CONFIG_TCP_MD5SIG
+	struct tcp_md5sig_key	*tw_md5_key;
+#endif
+	/* Few sockets in timewait have cookies; in that case, then this
+	 * object holds a reference to them (tw_cookie_values->kref).
+	 */
+	struct tcp_cookie_values  *tw_cookie_values;
+};
+
+static inline struct tcp_timewait_sock *tcp_twsk(const struct sock *sk)
+{
+	return (struct tcp_timewait_sock *)sk;
+}
+
+#endif	/* __KERNEL__ */
+
+#endif	/* _LINUX_TCP_H */
diff --git a/include/linux/telephony.h b/include/linux/telephony.h
new file mode 100644
index 00000000..f63afe33
--- /dev/null
+++ b/include/linux/telephony.h
@@ -0,0 +1,262 @@
+/******************************************************************************
+ *
+ *		telephony.h
+ *
+ *		Basic Linux Telephony Interface
+ *
+ *		(c) Copyright 1999-2001 Quicknet Technologies, Inc.
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ *    Authors:       Ed Okerson, <eokerson@quicknet.net>
+ *                   Greg Herlein, <gherlein@quicknet.net>
+ *
+ *    Contributors:  Alan Cox, <alan@lxorguk.ukuu.org.uk>
+ *                   David W. Erhart, <derhart@quicknet.net>
+ *
+ * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR
+ * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
+ * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF QUICKNET
+ * TECHNOLOGIES, INC. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * QUICKNET TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
+ * ON AN "AS IS" BASIS, AND QUICKNET TECHNOLOGIES, INC. HAS NO OBLIGATION
+ * TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
+ *
+ *****************************************************************************/
+
+#ifndef TELEPHONY_H
+#define TELEPHONY_H
+
+#define TELEPHONY_VERSION 3013
+
+#define PHONE_VENDOR_IXJ          1
+#define PHONE_VENDOR_QUICKNET	  PHONE_VENDOR_IXJ
+#define PHONE_VENDOR_VOICETRONIX  2
+#define PHONE_VENDOR_ACULAB       3
+#define PHONE_VENDOR_DIGI         4
+#define PHONE_VENDOR_FRANKLIN     5
+
+/******************************************************************************
+ *  Vendor Summary Information Area
+ *
+ *  Quicknet Technologies, Inc. - makes low density analog telephony cards
+ *    with audio compression, POTS and PSTN interfaces (www.quicknet.net)
+ *
+ *  (other vendors following this API shuld add a short description of
+ *  the telephony products they support under Linux)
+ *
+ *****************************************************************************/
+#define QTI_PHONEJACK		100
+#define QTI_LINEJACK		300
+#define QTI_PHONEJACK_LITE	400
+#define QTI_PHONEJACK_PCI	500
+#define QTI_PHONECARD		600
+
+/******************************************************************************
+*
+* The capabilities ioctls can inform you of the capabilities of each phone
+* device installed in your system.  The PHONECTL_CAPABILITIES ioctl
+* returns an integer value indicating the number of capabilities the   
+* device has.  The PHONECTL_CAPABILITIES_LIST will fill an array of 
+* capability structs with all of its capabilities.  The
+* PHONECTL_CAPABILITIES_CHECK takes a single capability struct and returns
+* a TRUE if the device has that capability, otherwise it returns false.
+* 
+******************************************************************************/
+typedef enum {
+	vendor = 0,
+	device,
+	port,
+	codec,
+	dsp
+} phone_cap;
+
+struct phone_capability {
+	char desc[80];
+	phone_cap captype;
+	int cap;
+	int handle;
+};
+
+typedef enum {
+	pots = 0,
+	pstn,
+	handset,
+	speaker
+} phone_ports;
+
+#define PHONE_CAPABILITIES              _IO  ('q', 0x80)
+#define PHONE_CAPABILITIES_LIST         _IOR ('q', 0x81, struct phone_capability *)
+#define PHONE_CAPABILITIES_CHECK        _IOW ('q', 0x82, struct phone_capability *)
+
+typedef struct {
+        char month[3];
+        char day[3];
+        char hour[3];
+        char min[3];
+        int numlen;
+        char number[11];
+        int namelen;
+        char name[80];
+} PHONE_CID;
+ 
+#define PHONE_RING			_IO  ('q', 0x83)
+#define PHONE_HOOKSTATE			_IO  ('q', 0x84)
+#define PHONE_MAXRINGS			_IOW ('q', 0x85, char)
+#define PHONE_RING_CADENCE		_IOW ('q', 0x86, short)
+#define OLD_PHONE_RING_START            _IO  ('q', 0x87)
+#define PHONE_RING_START		_IOW ('q', 0x87, PHONE_CID *)
+#define PHONE_RING_STOP			_IO  ('q', 0x88)
+
+#define USA_RING_CADENCE	 0xC0C0
+
+#define PHONE_REC_CODEC			_IOW ('q', 0x89, int)
+#define PHONE_REC_START			_IO  ('q', 0x8A)
+#define PHONE_REC_STOP			_IO  ('q', 0x8B)
+#define PHONE_REC_DEPTH			_IOW ('q', 0x8C, int)
+#define PHONE_FRAME			_IOW ('q', 0x8D, int)
+#define PHONE_REC_VOLUME		_IOW ('q', 0x8E, int)
+#define PHONE_REC_VOLUME_LINEAR		_IOW ('q', 0xDB, int)
+#define PHONE_REC_LEVEL			_IO  ('q', 0x8F)
+
+#define PHONE_PLAY_CODEC		_IOW ('q', 0x90, int)
+#define PHONE_PLAY_START		_IO  ('q', 0x91)
+#define PHONE_PLAY_STOP			_IO  ('q', 0x92)
+#define PHONE_PLAY_DEPTH		_IOW ('q', 0x93, int)
+#define PHONE_PLAY_VOLUME		_IOW ('q', 0x94, int)
+#define PHONE_PLAY_VOLUME_LINEAR	_IOW ('q', 0xDC, int)
+#define PHONE_PLAY_LEVEL		_IO  ('q', 0x95)
+#define PHONE_DTMF_READY		_IOR ('q', 0x96, int)
+#define PHONE_GET_DTMF			_IOR ('q', 0x97, int)
+#define PHONE_GET_DTMF_ASCII		_IOR ('q', 0x98, int)
+#define PHONE_DTMF_OOB			_IOW ('q', 0x99, int)
+#define PHONE_EXCEPTION			_IOR ('q', 0x9A, int)
+#define PHONE_PLAY_TONE			_IOW ('q', 0x9B, char)
+#define PHONE_SET_TONE_ON_TIME		_IOW ('q', 0x9C, int)
+#define PHONE_SET_TONE_OFF_TIME		_IOW ('q', 0x9D, int)
+#define PHONE_GET_TONE_ON_TIME		_IO  ('q', 0x9E)
+#define PHONE_GET_TONE_OFF_TIME		_IO  ('q', 0x9F)
+#define PHONE_GET_TONE_STATE		_IO  ('q', 0xA0)
+#define PHONE_BUSY			_IO  ('q', 0xA1)
+#define PHONE_RINGBACK			_IO  ('q', 0xA2)
+#define PHONE_DIALTONE			_IO  ('q', 0xA3)
+#define PHONE_CPT_STOP			_IO  ('q', 0xA4)
+
+#define PHONE_PSTN_SET_STATE		_IOW ('q', 0xA4, int)
+#define PHONE_PSTN_GET_STATE		_IO  ('q', 0xA5)
+
+#define PSTN_ON_HOOK		0
+#define PSTN_RINGING		1
+#define PSTN_OFF_HOOK		2
+#define PSTN_PULSE_DIAL		3
+
+/******************************************************************************
+* 
+* The wink duration is tunable with this ioctl.  The default wink duration  
+* is 320ms.  You do not need to use this ioctl if you do not require a
+* different wink duration.
+* 
+******************************************************************************/
+#define PHONE_WINK_DURATION		_IOW ('q', 0xA6, int)
+#define PHONE_WINK			_IOW ('q', 0xAA, int)
+
+/******************************************************************************
+* 
+*  Codec Definitions
+* 
+******************************************************************************/
+typedef enum {
+	G723_63 = 1,
+	G723_53 = 2,
+	TS85 = 3,
+	TS48 = 4,
+	TS41 = 5,
+	G728 = 6,
+	G729 = 7,
+	ULAW = 8,
+	ALAW = 9,
+	LINEAR16 = 10,
+	LINEAR8 = 11,
+	WSS = 12,
+	G729B = 13
+} phone_codec;
+
+struct phone_codec_data
+{
+        phone_codec type;
+        unsigned short buf_min, buf_opt, buf_max;
+};
+
+#define PHONE_QUERY_CODEC               _IOWR ('q', 0xA7, struct phone_codec_data *)
+#define PHONE_PSTN_LINETEST             _IO ('q', 0xA8)
+
+/******************************************************************************
+* 
+* This controls the VAD/CNG functionality of G.723.1.  The driver will
+* always pass full size frames, any unused bytes will be padded with zeros,
+* and frames passed to the driver should also be padded with zeros.  The
+* frame type is encoded in the least significant two bits of the first
+* WORD of the frame as follows:
+*
+* bits 1-0	Frame Type	Data Rate		Significant Words
+* 00		0		G.723.1 6.3		12
+* 01		1		G.723.1 5.3		10
+* 10		2		VAD/CNG			 2
+* 11		3		Repeat last CNG		 2 bits
+* 
+******************************************************************************/
+#define PHONE_VAD			_IOW ('q', 0xA9, int)
+
+
+/******************************************************************************
+*
+* The exception structure allows us to multiplex multiple events onto the
+* select() exception set.  If any of these flags are set select() will
+* return with a positive indication on the exception set.  The dtmf_ready
+* bit indicates if there is data waiting in the DTMF buffer.  The
+* hookstate bit is set if there is a change in hookstate status, it does not
+* indicate the current state of the hookswitch.  The pstn_ring bit
+* indicates that the DAA on a LineJACK card has detected ring voltage on
+* the PSTN port.  The caller_id bit indicates that caller_id data has been
+* received and is available.  The pstn_wink bit indicates that the DAA on
+* the LineJACK has received a wink from the telco switch.  The f0, f1, f2
+* and f3 bits indicate that the filter has been triggered by detecting the
+* frequency programmed into that filter.
+*
+* The remaining bits should be set to zero. They will become defined over time
+* for other interface cards and their needs.
+*
+******************************************************************************/
+struct phone_except
+{
+	unsigned int dtmf_ready:1;
+	unsigned int hookstate:1;
+	unsigned int pstn_ring:1;
+	unsigned int caller_id:1;
+	unsigned int pstn_wink:1;
+	unsigned int f0:1;
+	unsigned int f1:1;
+	unsigned int f2:1;
+	unsigned int f3:1;
+	unsigned int flash:1;
+	unsigned int fc0:1;
+	unsigned int fc1:1;
+	unsigned int fc2:1;
+	unsigned int fc3:1;
+	unsigned int reserved:18;
+};
+
+union telephony_exception {
+	struct phone_except bits;
+	unsigned int bytes;
+};
+
+
+#endif		/* TELEPHONY_H */
+
diff --git a/include/linux/termios.h b/include/linux/termios.h
new file mode 100644
index 00000000..2acd0c1f
--- /dev/null
+++ b/include/linux/termios.h
@@ -0,0 +1,22 @@
+#ifndef _LINUX_TERMIOS_H
+#define _LINUX_TERMIOS_H
+
+#include <linux/types.h>
+#include <asm/termios.h>
+
+#define NFF	5
+
+struct termiox
+{
+	__u16	x_hflag;
+	__u16	x_cflag;
+	__u16	x_rflag[NFF];
+	__u16	x_sflag;
+};
+
+#define	RTSXOFF		0x0001		/* RTS flow control on input */
+#define	CTSXON		0x0002		/* CTS flow control on output */
+#define	DTRXOFF		0x0004		/* DTR flow control on input */
+#define DSRXON		0x0008		/* DCD flow control on output */
+
+#endif
diff --git a/include/linux/textsearch.h b/include/linux/textsearch.h
new file mode 100644
index 00000000..cfaee869
--- /dev/null
+++ b/include/linux/textsearch.h
@@ -0,0 +1,178 @@
+#ifndef __LINUX_TEXTSEARCH_H
+#define __LINUX_TEXTSEARCH_H
+
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+
+struct module;
+
+struct ts_config;
+
+#define TS_AUTOLOAD	1 /* Automatically load textsearch modules when needed */
+#define TS_IGNORECASE	2 /* Searches string case insensitively */
+
+/**
+ * struct ts_state - search state
+ * @offset: offset for next match
+ * @cb: control buffer, for persistent variables of get_next_block()
+ */
+struct ts_state
+{
+	unsigned int		offset;
+	char			cb[40];
+};
+
+/**
+ * struct ts_ops - search module operations
+ * @name: name of search algorithm
+ * @init: initialization function to prepare a search
+ * @find: find the next occurrence of the pattern
+ * @destroy: destroy algorithm specific parts of a search configuration
+ * @get_pattern: return head of pattern
+ * @get_pattern_len: return length of pattern
+ * @owner: module reference to algorithm
+ */
+struct ts_ops
+{
+	const char		*name;
+	struct ts_config *	(*init)(const void *, unsigned int, gfp_t, int);
+	unsigned int		(*find)(struct ts_config *,
+					struct ts_state *);
+	void			(*destroy)(struct ts_config *);
+	void *			(*get_pattern)(struct ts_config *);
+	unsigned int		(*get_pattern_len)(struct ts_config *);
+	struct module		*owner;
+	struct list_head	list;
+};
+
+/**
+ * struct ts_config - search configuration
+ * @ops: operations of chosen algorithm
+ * @flags: flags
+ * @get_next_block: callback to fetch the next block to search in
+ * @finish: callback to finalize a search
+ */
+struct ts_config
+{
+	struct ts_ops		*ops;
+	int 			flags;
+
+	/**
+	 * get_next_block - fetch next block of data
+	 * @consumed: number of bytes consumed by the caller
+	 * @dst: destination buffer
+	 * @conf: search configuration
+	 * @state: search state
+	 *
+	 * Called repeatedly until 0 is returned. Must assign the
+	 * head of the next block of data to &*dst and return the length
+	 * of the block or 0 if at the end. consumed == 0 indicates
+	 * a new search. May store/read persistent values in state->cb.
+	 */
+	unsigned int		(*get_next_block)(unsigned int consumed,
+						  const u8 **dst,
+						  struct ts_config *conf,
+						  struct ts_state *state);
+
+	/**
+	 * finish - finalize/clean a series of get_next_block() calls
+	 * @conf: search configuration
+	 * @state: search state
+	 *
+	 * Called after the last use of get_next_block(), may be used
+	 * to cleanup any leftovers.
+	 */
+	void			(*finish)(struct ts_config *conf,
+					  struct ts_state *state);
+};
+
+/**
+ * textsearch_next - continue searching for a pattern
+ * @conf: search configuration
+ * @state: search state
+ *
+ * Continues a search looking for more occurrences of the pattern.
+ * textsearch_find() must be called to find the first occurrence
+ * in order to reset the state.
+ *
+ * Returns the position of the next occurrence of the pattern or
+ * UINT_MAX if not match was found.
+ */ 
+static inline unsigned int textsearch_next(struct ts_config *conf,
+					   struct ts_state *state)
+{
+	unsigned int ret = conf->ops->find(conf, state);
+
+	if (conf->finish)
+		conf->finish(conf, state);
+
+	return ret;
+}
+
+/**
+ * textsearch_find - start searching for a pattern
+ * @conf: search configuration
+ * @state: search state
+ *
+ * Returns the position of first occurrence of the pattern or
+ * UINT_MAX if no match was found.
+ */ 
+static inline unsigned int textsearch_find(struct ts_config *conf,
+					   struct ts_state *state)
+{
+	state->offset = 0;
+	return textsearch_next(conf, state);
+}
+
+/**
+ * textsearch_get_pattern - return head of the pattern
+ * @conf: search configuration
+ */
+static inline void *textsearch_get_pattern(struct ts_config *conf)
+{
+	return conf->ops->get_pattern(conf);
+}
+
+/**
+ * textsearch_get_pattern_len - return length of the pattern
+ * @conf: search configuration
+ */
+static inline unsigned int textsearch_get_pattern_len(struct ts_config *conf)
+{
+	return conf->ops->get_pattern_len(conf);
+}
+
+extern int textsearch_register(struct ts_ops *);
+extern int textsearch_unregister(struct ts_ops *);
+extern struct ts_config *textsearch_prepare(const char *, const void *,
+					    unsigned int, gfp_t, int);
+extern void textsearch_destroy(struct ts_config *conf);
+extern unsigned int textsearch_find_continuous(struct ts_config *,
+					       struct ts_state *,
+					       const void *, unsigned int);
+
+
+#define TS_PRIV_ALIGNTO	8
+#define TS_PRIV_ALIGN(len) (((len) + TS_PRIV_ALIGNTO-1) & ~(TS_PRIV_ALIGNTO-1))
+
+static inline struct ts_config *alloc_ts_config(size_t payload,
+						gfp_t gfp_mask)
+{
+	struct ts_config *conf;
+
+	conf = kzalloc(TS_PRIV_ALIGN(sizeof(*conf)) + payload, gfp_mask);
+	if (conf == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	return conf;
+}
+
+static inline void *ts_config_priv(struct ts_config *conf)
+{
+	return ((u8 *) conf + TS_PRIV_ALIGN(sizeof(struct ts_config)));
+}
+
+#endif
diff --git a/include/linux/textsearch_fsm.h b/include/linux/textsearch_fsm.h
new file mode 100644
index 00000000..fdfa078c
--- /dev/null
+++ b/include/linux/textsearch_fsm.h
@@ -0,0 +1,48 @@
+#ifndef __LINUX_TEXTSEARCH_FSM_H
+#define __LINUX_TEXTSEARCH_FSM_H
+
+#include <linux/types.h>
+
+enum {
+	TS_FSM_SPECIFIC,	/* specific character */
+	TS_FSM_WILDCARD,	/* any character */
+	TS_FSM_DIGIT,		/* isdigit() */
+	TS_FSM_XDIGIT,		/* isxdigit() */
+	TS_FSM_PRINT,		/* isprint() */
+	TS_FSM_ALPHA,		/* isalpha() */
+	TS_FSM_ALNUM,		/* isalnum() */
+	TS_FSM_ASCII,		/* isascii() */
+	TS_FSM_CNTRL,		/* iscntrl() */
+	TS_FSM_GRAPH,		/* isgraph() */
+	TS_FSM_LOWER,		/* islower() */
+	TS_FSM_UPPER,		/* isupper() */
+	TS_FSM_PUNCT,		/* ispunct() */
+	TS_FSM_SPACE,		/* isspace() */
+	__TS_FSM_TYPE_MAX,
+};
+#define TS_FSM_TYPE_MAX (__TS_FSM_TYPE_MAX - 1)
+
+enum {
+	TS_FSM_SINGLE,		/* 1 occurrence */
+	TS_FSM_PERHAPS,		/* 1 or 0 occurrence */
+	TS_FSM_ANY,		/* 0..n occurrences */
+	TS_FSM_MULTI,		/* 1..n occurrences */
+	TS_FSM_HEAD_IGNORE,	/* 0..n ignored occurrences at head */
+	__TS_FSM_RECUR_MAX,
+};
+#define TS_FSM_RECUR_MAX (__TS_FSM_RECUR_MAX - 1)
+
+/**
+ * struct ts_fsm_token - state machine token (state)
+ * @type: type of token
+ * @recur: number of recurrences
+ * @value: character value for TS_FSM_SPECIFIC
+ */
+struct ts_fsm_token
+{
+	__u16		type;
+	__u8		recur;
+	__u8		value;
+};
+
+#endif
diff --git a/include/linux/tfrc.h b/include/linux/tfrc.h
new file mode 100644
index 00000000..8a8462b4
--- /dev/null
+++ b/include/linux/tfrc.h
@@ -0,0 +1,55 @@
+#ifndef _LINUX_TFRC_H_
+#define _LINUX_TFRC_H_
+/*
+ *  TFRC - Data Structures for the TCP-Friendly Rate Control congestion
+ *         control mechanism as specified in RFC 3448.
+ *
+ *  Copyright (c) 2005 The University of Waikato, Hamilton, New Zealand.
+ *  Copyright (c) 2005 Ian McDonald <iam4@cs.waikato.ac.nz>
+ *  Copyright (c) 2005 Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ *  Copyright (c) 2003 Nils-Erik Mattsson, Joacim Haggmark, Magnus Erixzon
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ */
+#include <linux/types.h>
+
+/** 	tfrc_rx_info    -    TFRC Receiver Data Structure
+ *
+ * 	@tfrcrx_x_recv:	receiver estimate of sending rate (3.2.2)
+ * 	@tfrcrx_rtt:	round-trip-time (communicated by sender)
+ * 	@tfrcrx_p:	current estimate of loss event rate (3.2.2)
+ */
+struct tfrc_rx_info {
+  	__u32 tfrcrx_x_recv;
+	__u32 tfrcrx_rtt;
+  	__u32 tfrcrx_p;
+};
+
+/** 	tfrc_tx_info    -    TFRC Sender Data Structure
+ *
+ * 	@tfrctx_x:	computed transmit rate (4.3 (4))
+ * 	@tfrctx_x_recv: receiver estimate of send rate (4.3)
+ * 	@tfrctx_x_calc:	return value of throughput equation (3.1)
+ * 	@tfrctx_rtt:	(moving average) estimate of RTT (4.3)
+ * 	@tfrctx_p:	current loss event rate (5.4)
+ * 	@tfrctx_rto:	estimate of RTO, equals 4*RTT (4.3)
+ * 	@tfrctx_ipi:	inter-packet interval (4.6)
+ *
+ *  Note: X and X_recv are both maintained in units of 64 * bytes/second. This
+ *        enables a finer resolution of sending rates and avoids problems with
+ *        integer arithmetic; u32 is not sufficient as scaling consumes 6 bits.
+ */
+struct tfrc_tx_info {
+	__u64 tfrctx_x;
+	__u64 tfrctx_x_recv;
+	__u32 tfrctx_x_calc;
+	__u32 tfrctx_rtt;
+	__u32 tfrctx_p;
+	__u32 tfrctx_rto;
+	__u32 tfrctx_ipi;
+};
+
+#endif /* _LINUX_TFRC_H_ */
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
new file mode 100644
index 00000000..796f1ff0
--- /dev/null
+++ b/include/linux/thermal.h
@@ -0,0 +1,163 @@
+/*
+ *  thermal.h  ($Revision: 0 $)
+ *
+ *  Copyright (C) 2008  Intel Corp
+ *  Copyright (C) 2008  Zhang Rui <rui.zhang@intel.com>
+ *  Copyright (C) 2008  Sujith Thomas <sujith.thomas@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#ifndef __THERMAL_H__
+#define __THERMAL_H__
+
+#include <linux/idr.h>
+#include <linux/device.h>
+#include <linux/workqueue.h>
+
+struct thermal_zone_device;
+struct thermal_cooling_device;
+
+enum thermal_device_mode {
+	THERMAL_DEVICE_DISABLED = 0,
+	THERMAL_DEVICE_ENABLED,
+};
+
+enum thermal_trip_type {
+	THERMAL_TRIP_ACTIVE = 0,
+	THERMAL_TRIP_PASSIVE,
+	THERMAL_TRIP_HOT,
+	THERMAL_TRIP_CRITICAL,
+};
+
+struct thermal_zone_device_ops {
+	int (*bind) (struct thermal_zone_device *,
+		     struct thermal_cooling_device *);
+	int (*unbind) (struct thermal_zone_device *,
+		       struct thermal_cooling_device *);
+	int (*get_temp) (struct thermal_zone_device *, unsigned long *);
+	int (*get_mode) (struct thermal_zone_device *,
+			 enum thermal_device_mode *);
+	int (*set_mode) (struct thermal_zone_device *,
+		enum thermal_device_mode);
+	int (*get_trip_type) (struct thermal_zone_device *, int,
+		enum thermal_trip_type *);
+	int (*get_trip_temp) (struct thermal_zone_device *, int,
+			      unsigned long *);
+	int (*get_crit_temp) (struct thermal_zone_device *, unsigned long *);
+	int (*notify) (struct thermal_zone_device *, int,
+		       enum thermal_trip_type);
+};
+
+struct thermal_cooling_device_ops {
+	int (*get_max_state) (struct thermal_cooling_device *, unsigned long *);
+	int (*get_cur_state) (struct thermal_cooling_device *, unsigned long *);
+	int (*set_cur_state) (struct thermal_cooling_device *, unsigned long);
+};
+
+#define THERMAL_TRIPS_NONE -1
+#define THERMAL_MAX_TRIPS 12
+#define THERMAL_NAME_LENGTH 20
+struct thermal_cooling_device {
+	int id;
+	char type[THERMAL_NAME_LENGTH];
+	struct device device;
+	void *devdata;
+	const struct thermal_cooling_device_ops *ops;
+	struct list_head node;
+};
+
+#define KELVIN_TO_CELSIUS(t)	(long)(((long)t-2732 >= 0) ?	\
+				((long)t-2732+5)/10 : ((long)t-2732-5)/10)
+#define CELSIUS_TO_KELVIN(t)	((t)*10+2732)
+
+struct thermal_zone_device {
+	int id;
+	char type[THERMAL_NAME_LENGTH];
+	struct device device;
+	void *devdata;
+	int trips;
+	int tc1;
+	int tc2;
+	int passive_delay;
+	int polling_delay;
+	int last_temperature;
+	bool passive;
+	unsigned int forced_passive;
+	const struct thermal_zone_device_ops *ops;
+	struct list_head cooling_devices;
+	struct idr idr;
+	struct mutex lock;	/* protect cooling devices list */
+	struct list_head node;
+	struct delayed_work poll_queue;
+};
+/* Adding event notification support elements */
+#define THERMAL_GENL_FAMILY_NAME                "thermal_event"
+#define THERMAL_GENL_VERSION                    0x01
+#define THERMAL_GENL_MCAST_GROUP_NAME           "thermal_mc_group"
+
+enum events {
+	THERMAL_AUX0,
+	THERMAL_AUX1,
+	THERMAL_CRITICAL,
+	THERMAL_DEV_FAULT,
+};
+
+struct thermal_genl_event {
+	u32 orig;
+	enum events event;
+};
+/* attributes of thermal_genl_family */
+enum {
+	THERMAL_GENL_ATTR_UNSPEC,
+	THERMAL_GENL_ATTR_EVENT,
+	__THERMAL_GENL_ATTR_MAX,
+};
+#define THERMAL_GENL_ATTR_MAX (__THERMAL_GENL_ATTR_MAX - 1)
+
+/* commands supported by the thermal_genl_family */
+enum {
+	THERMAL_GENL_CMD_UNSPEC,
+	THERMAL_GENL_CMD_EVENT,
+	__THERMAL_GENL_CMD_MAX,
+};
+#define THERMAL_GENL_CMD_MAX (__THERMAL_GENL_CMD_MAX - 1)
+
+struct thermal_zone_device *thermal_zone_device_register(char *, int, void *,
+		const struct thermal_zone_device_ops *, int tc1, int tc2,
+		int passive_freq, int polling_freq);
+void thermal_zone_device_unregister(struct thermal_zone_device *);
+
+int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int,
+				     struct thermal_cooling_device *);
+int thermal_zone_unbind_cooling_device(struct thermal_zone_device *, int,
+				       struct thermal_cooling_device *);
+void thermal_zone_device_update(struct thermal_zone_device *);
+struct thermal_cooling_device *thermal_cooling_device_register(char *, void *,
+		const struct thermal_cooling_device_ops *);
+void thermal_cooling_device_unregister(struct thermal_cooling_device *);
+
+#ifdef CONFIG_NET
+extern int thermal_generate_netlink_event(u32 orig, enum events event);
+#else
+static inline int thermal_generate_netlink_event(u32 orig, enum events event)
+{
+	return 0;
+}
+#endif
+
+#endif /* __THERMAL_H__ */
diff --git a/include/linux/thread_info.h b/include/linux/thread_info.h
new file mode 100644
index 00000000..8d03f079
--- /dev/null
+++ b/include/linux/thread_info.h
@@ -0,0 +1,128 @@
+/* thread_info.h: common low-level thread information accessors
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds
+ */
+
+#ifndef _LINUX_THREAD_INFO_H
+#define _LINUX_THREAD_INFO_H
+
+#include <linux/types.h>
+
+struct timespec;
+struct compat_timespec;
+
+/*
+ * System call restart block.
+ */
+struct restart_block {
+	long (*fn)(struct restart_block *);
+	union {
+		/* For futex_wait and futex_wait_requeue_pi */
+		struct {
+			u32 __user *uaddr;
+			u32 val;
+			u32 flags;
+			u32 bitset;
+			u64 time;
+			u32 __user *uaddr2;
+		} futex;
+		/* For nanosleep */
+		struct {
+			clockid_t clockid;
+			struct timespec __user *rmtp;
+#ifdef CONFIG_COMPAT
+			struct compat_timespec __user *compat_rmtp;
+#endif
+			u64 expires;
+		} nanosleep;
+		/* For poll */
+		struct {
+			struct pollfd __user *ufds;
+			int nfds;
+			int has_timeout;
+			unsigned long tv_sec;
+			unsigned long tv_nsec;
+		} poll;
+	};
+};
+
+extern long do_no_restart_syscall(struct restart_block *parm);
+
+#include <linux/bitops.h>
+#include <asm/thread_info.h>
+
+#ifdef __KERNEL__
+
+/*
+ * flag set/clear/test wrappers
+ * - pass TIF_xxxx constants to these functions
+ */
+
+static inline void set_ti_thread_flag(struct thread_info *ti, int flag)
+{
+	set_bit(flag, (unsigned long *)&ti->flags);
+}
+
+static inline void clear_ti_thread_flag(struct thread_info *ti, int flag)
+{
+	clear_bit(flag, (unsigned long *)&ti->flags);
+}
+
+static inline int test_and_set_ti_thread_flag(struct thread_info *ti, int flag)
+{
+	return test_and_set_bit(flag, (unsigned long *)&ti->flags);
+}
+
+static inline int test_and_clear_ti_thread_flag(struct thread_info *ti, int flag)
+{
+	return test_and_clear_bit(flag, (unsigned long *)&ti->flags);
+}
+
+static inline int test_ti_thread_flag(struct thread_info *ti, int flag)
+{
+	return test_bit(flag, (unsigned long *)&ti->flags);
+}
+
+#define set_thread_flag(flag) \
+	set_ti_thread_flag(current_thread_info(), flag)
+#define clear_thread_flag(flag) \
+	clear_ti_thread_flag(current_thread_info(), flag)
+#define test_and_set_thread_flag(flag) \
+	test_and_set_ti_thread_flag(current_thread_info(), flag)
+#define test_and_clear_thread_flag(flag) \
+	test_and_clear_ti_thread_flag(current_thread_info(), flag)
+#define test_thread_flag(flag) \
+	test_ti_thread_flag(current_thread_info(), flag)
+
+#define set_need_resched()	set_thread_flag(TIF_NEED_RESCHED)
+#define clear_need_resched()	clear_thread_flag(TIF_NEED_RESCHED)
+
+#if defined TIF_RESTORE_SIGMASK && !defined HAVE_SET_RESTORE_SIGMASK
+/*
+ * An arch can define its own version of set_restore_sigmask() to get the
+ * job done however works, with or without TIF_RESTORE_SIGMASK.
+ */
+#define HAVE_SET_RESTORE_SIGMASK	1
+
+/**
+ * set_restore_sigmask() - make sure saved_sigmask processing gets done
+ *
+ * This sets TIF_RESTORE_SIGMASK and ensures that the arch signal code
+ * will run before returning to user mode, to process the flag.  For
+ * all callers, TIF_SIGPENDING is already set or it's no harm to set
+ * it.  TIF_RESTORE_SIGMASK need not be in the set of bits that the
+ * arch code will notice on return to user mode, in case those bits
+ * are scarce.  We set TIF_SIGPENDING here to ensure that the arch
+ * signal code always gets run when TIF_RESTORE_SIGMASK is set.
+ */
+static inline void set_restore_sigmask(void)
+{
+	set_thread_flag(TIF_RESTORE_SIGMASK);
+	set_thread_flag(TIF_SIGPENDING);
+}
+#endif	/* TIF_RESTORE_SIGMASK && !HAVE_SET_RESTORE_SIGMASK */
+
+#endif	/* __KERNEL__ */
+
+#endif /* _LINUX_THREAD_INFO_H */
diff --git a/include/linux/threads.h b/include/linux/threads.h
new file mode 100644
index 00000000..383ab959
--- /dev/null
+++ b/include/linux/threads.h
@@ -0,0 +1,45 @@
+#ifndef _LINUX_THREADS_H
+#define _LINUX_THREADS_H
+
+
+/*
+ * The default limit for the nr of threads is now in
+ * /proc/sys/kernel/threads-max.
+ */
+
+/*
+ * Maximum supported processors.  Setting this smaller saves quite a
+ * bit of memory.  Use nr_cpu_ids instead of this except for static bitmaps.
+ */
+#ifndef CONFIG_NR_CPUS
+/* FIXME: This should be fixed in the arch's Kconfig */
+#define CONFIG_NR_CPUS	1
+#endif
+
+/* Places which use this should consider cpumask_var_t. */
+#define NR_CPUS		CONFIG_NR_CPUS
+
+#define MIN_THREADS_LEFT_FOR_ROOT 4
+
+/*
+ * This controls the default maximum pid allocated to a process
+ */
+#define PID_MAX_DEFAULT (CONFIG_BASE_SMALL ? 0x1000 : 0x8000)
+
+/*
+ * A maximum of 4 million PIDs should be enough for a while.
+ * [NOTE: PID/TIDs are limited to 2^29 ~= 500+ million, see futex.h.]
+ */
+#define PID_MAX_LIMIT (CONFIG_BASE_SMALL ? PAGE_SIZE * 8 : \
+	(sizeof(long) > 4 ? 4 * 1024 * 1024 : PID_MAX_DEFAULT))
+
+/*
+ * Define a minimum number of pids per cpu.  Heuristically based
+ * on original pid max of 32k for 32 cpus.  Also, increase the
+ * minimum settable value for pid_max on the running system based
+ * on similar defaults.  See kernel/pid.c:pidmap_init() for details.
+ */
+#define PIDS_PER_CPU_DEFAULT	1024
+#define PIDS_PER_CPU_MIN	8
+
+#endif
diff --git a/include/linux/ti_wilink_st.h b/include/linux/ti_wilink_st.h
new file mode 100644
index 00000000..2ef4385d
--- /dev/null
+++ b/include/linux/ti_wilink_st.h
@@ -0,0 +1,448 @@
+/*
+ *  Shared Transport Header file
+ *	To be included by the protocol stack drivers for
+ *	Texas Instruments BT,FM and GPS combo chip drivers
+ *	and also serves the sub-modules of the shared transport driver.
+ *
+ *  Copyright (C) 2009-2010 Texas Instruments
+ *  Author: Pavan Savoy <pavan_savoy@ti.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef TI_WILINK_ST_H
+#define TI_WILINK_ST_H
+
+/**
+ * enum proto-type - The protocol on WiLink chips which share a
+ *	common physical interface like UART.
+ */
+enum proto_type {
+	ST_BT,
+	ST_FM,
+	ST_GPS,
+	ST_MAX_CHANNELS = 16,
+};
+
+/**
+ * struct st_proto_s - Per Protocol structure from BT/FM/GPS to ST
+ * @type: type of the protocol being registered among the
+ *	available proto_type(BT, FM, GPS the protocol which share TTY).
+ * @recv: the receiver callback pointing to a function in the
+ *	protocol drivers called by the ST driver upon receiving
+ *	relevant data.
+ * @match_packet: reserved for future use, to make ST more generic
+ * @reg_complete_cb: callback handler pointing to a function in protocol
+ *	handler called by ST when the pending registrations are complete.
+ *	The registrations are marked pending, in situations when fw
+ *	download is in progress.
+ * @write: pointer to function in ST provided to protocol drivers from ST,
+ *	to be made use when protocol drivers have data to send to TTY.
+ * @priv_data: privdate data holder for the protocol drivers, sent
+ *	from the protocol drivers during registration, and sent back on
+ *	reg_complete_cb and recv.
+ * @chnl_id: channel id the protocol driver is interested in, the channel
+ *	id is nothing but the 1st byte of the packet in UART frame.
+ * @max_frame_size: size of the largest frame the protocol can receive.
+ * @hdr_len: length of the header structure of the protocol.
+ * @offset_len_in_hdr: this provides the offset of the length field in the
+ *	header structure of the protocol header, to assist ST to know
+ *	how much to receive, if the data is split across UART frames.
+ * @len_size: whether the length field inside the header is 2 bytes
+ *	or 1 byte.
+ * @reserve: the number of bytes ST needs to reserve in the skb being
+ *	prepared for the protocol driver.
+ */
+struct st_proto_s {
+	enum proto_type type;
+	long (*recv) (void *, struct sk_buff *);
+	unsigned char (*match_packet) (const unsigned char *data);
+	void (*reg_complete_cb) (void *, char data);
+	long (*write) (struct sk_buff *skb);
+	void *priv_data;
+
+	unsigned char chnl_id;
+	unsigned short max_frame_size;
+	unsigned char hdr_len;
+	unsigned char offset_len_in_hdr;
+	unsigned char len_size;
+	unsigned char reserve;
+};
+
+extern long st_register(struct st_proto_s *);
+extern long st_unregister(struct st_proto_s *);
+
+
+/*
+ * header information used by st_core.c
+ */
+
+/* states of protocol list */
+#define ST_NOTEMPTY	1
+#define ST_EMPTY	0
+
+/*
+ * possible st_states
+ */
+#define ST_INITIALIZING		1
+#define ST_REG_IN_PROGRESS	2
+#define ST_REG_PENDING		3
+#define ST_WAITING_FOR_RESP	4
+
+/**
+ * struct st_data_s - ST core internal structure
+ * @st_state: different states of ST like initializing, registration
+ *	in progress, this is mainly used to return relevant err codes
+ *	when protocol drivers are registering. It is also used to track
+ *	the recv function, as in during fw download only HCI events
+ *	can occur , where as during other times other events CH8, CH9
+ *	can occur.
+ * @tty: tty provided by the TTY core for line disciplines.
+ * @tx_skb: If for some reason the tty's write returns lesser bytes written
+ *	then to maintain the rest of data to be written on next instance.
+ *	This needs to be protected, hence the lock inside wakeup func.
+ * @tx_state: if the data is being written onto the TTY and protocol driver
+ *	wants to send more, queue up data and mark that there is
+ *	more data to send.
+ * @list: the list of protocols registered, only MAX can exist, one protocol
+ *	can register only once.
+ * @rx_state: states to be maintained inside st's tty receive
+ * @rx_count: count to be maintained inside st's tty receieve
+ * @rx_skb: the skb where all data for a protocol gets accumulated,
+ *	since tty might not call receive when a complete event packet
+ *	is received, the states, count and the skb needs to be maintained.
+ * @rx_chnl: the channel ID for which the data is getting accumalated for.
+ * @txq: the list of skbs which needs to be sent onto the TTY.
+ * @tx_waitq: if the chip is not in AWAKE state, the skbs needs to be queued
+ *	up in here, PM(WAKEUP_IND) data needs to be sent and then the skbs
+ *	from waitq can be moved onto the txq.
+ *	Needs locking too.
+ * @lock: the lock to protect skbs, queues, and ST states.
+ * @protos_registered: count of the protocols registered, also when 0 the
+ *	chip enable gpio can be toggled, and when it changes to 1 the fw
+ *	needs to be downloaded to initialize chip side ST.
+ * @ll_state: the various PM states the chip can be, the states are notified
+ *	to us, when the chip sends relevant PM packets(SLEEP_IND, WAKE_IND).
+ * @kim_data: reference to the parent encapsulating structure.
+ *
+ */
+struct st_data_s {
+	unsigned long st_state;
+	struct sk_buff *tx_skb;
+#define ST_TX_SENDING	1
+#define ST_TX_WAKEUP	2
+	unsigned long tx_state;
+	struct st_proto_s *list[ST_MAX_CHANNELS];
+	bool is_registered[ST_MAX_CHANNELS];
+	unsigned long rx_state;
+	unsigned long rx_count;
+	struct sk_buff *rx_skb;
+	unsigned char rx_chnl;
+	struct sk_buff_head txq, tx_waitq;
+	spinlock_t lock;
+	unsigned char	protos_registered;
+	unsigned long ll_state;
+	void *kim_data;
+	struct tty_struct *tty;
+};
+
+/*
+ * wrapper around tty->ops->write_room to check
+ * availability during firmware download
+ */
+int st_get_uart_wr_room(struct st_data_s *st_gdata);
+/**
+ * st_int_write -
+ * point this to tty->driver->write or tty->ops->write
+ * depending upon the kernel version
+ */
+int st_int_write(struct st_data_s*, const unsigned char*, int);
+
+/**
+ * st_write -
+ * internal write function, passed onto protocol drivers
+ * via the write function ptr of protocol struct
+ */
+long st_write(struct sk_buff *);
+
+/* function to be called from ST-LL */
+void st_ll_send_frame(enum proto_type, struct sk_buff *);
+
+/* internal wake up function */
+void st_tx_wakeup(struct st_data_s *st_data);
+
+/* init, exit entry funcs called from KIM */
+int st_core_init(struct st_data_s **);
+void st_core_exit(struct st_data_s *);
+
+/* ask for reference from KIM */
+void st_kim_ref(struct st_data_s **, int);
+
+#define GPS_STUB_TEST
+#ifdef GPS_STUB_TEST
+int gps_chrdrv_stub_write(const unsigned char*, int);
+void gps_chrdrv_stub_init(void);
+#endif
+
+/*
+ * header information used by st_kim.c
+ */
+
+/* time in msec to wait for
+ * line discipline to be installed
+ */
+#define LDISC_TIME	1000
+#define CMD_RESP_TIME	800
+#define CMD_WR_TIME	5000
+#define MAKEWORD(a, b)  ((unsigned short)(((unsigned char)(a)) \
+	| ((unsigned short)((unsigned char)(b))) << 8))
+
+#define GPIO_HIGH 1
+#define GPIO_LOW  0
+
+/* the Power-On-Reset logic, requires to attempt
+ * to download firmware onto chip more than once
+ * since the self-test for chip takes a while
+ */
+#define POR_RETRY_COUNT 5
+
+/**
+ * struct chip_version - save the chip version
+ */
+struct chip_version {
+	unsigned short full;
+	unsigned short chip;
+	unsigned short min_ver;
+	unsigned short maj_ver;
+};
+
+#define UART_DEV_NAME_LEN 32
+/**
+ * struct kim_data_s - the KIM internal data, embedded as the
+ *	platform's drv data. One for each ST device in the system.
+ * @uim_pid: KIM needs to communicate with UIM to request to install
+ *	the ldisc by opening UART when protocol drivers register.
+ * @kim_pdev: the platform device added in one of the board-XX.c file
+ *	in arch/XX/ directory, 1 for each ST device.
+ * @kim_rcvd: completion handler to notify when data was received,
+ *	mainly used during fw download, which involves multiple send/wait
+ *	for each of the HCI-VS commands.
+ * @ldisc_installed: completion handler to notify that the UIM accepted
+ *	the request to install ldisc, notify from tty_open which suggests
+ *	the ldisc was properly installed.
+ * @resp_buffer: data buffer for the .bts fw file name.
+ * @fw_entry: firmware class struct to request/release the fw.
+ * @rx_state: the rx state for kim's receive func during fw download.
+ * @rx_count: the rx count for the kim's receive func during fw download.
+ * @rx_skb: all of fw data might not come at once, and hence data storage for
+ *	whole of the fw response, only HCI_EVENTs and hence diff from ST's
+ *	response.
+ * @core_data: ST core's data, which mainly is the tty's disc_data
+ * @version: chip version available via a sysfs entry.
+ *
+ */
+struct kim_data_s {
+	long uim_pid;
+	struct platform_device *kim_pdev;
+	struct completion kim_rcvd, ldisc_installed;
+	char resp_buffer[30];
+	const struct firmware *fw_entry;
+	long nshutdown;
+	unsigned long rx_state;
+	unsigned long rx_count;
+	struct sk_buff *rx_skb;
+	struct st_data_s *core_data;
+	struct chip_version version;
+	unsigned char ldisc_install;
+	unsigned char dev_name[UART_DEV_NAME_LEN];
+	unsigned char flow_cntrl;
+	unsigned long baud_rate;
+};
+
+/**
+ * functions called when 1 of the protocol drivers gets
+ * registered, these need to communicate with UIM to request
+ * ldisc installed, read chip_version, download relevant fw
+ */
+long st_kim_start(void *);
+long st_kim_stop(void *);
+
+void st_kim_recv(void *, const unsigned char *, long count);
+void st_kim_complete(void *);
+void kim_st_list_protocols(struct st_data_s *, void *);
+
+/*
+ * BTS headers
+ */
+#define ACTION_SEND_COMMAND     1
+#define ACTION_WAIT_EVENT       2
+#define ACTION_SERIAL           3
+#define ACTION_DELAY            4
+#define ACTION_RUN_SCRIPT       5
+#define ACTION_REMARKS          6
+
+/**
+ * struct bts_header - the fw file is NOT binary which can
+ *	be sent onto TTY as is. The .bts is more a script
+ *	file which has different types of actions.
+ *	Each such action needs to be parsed by the KIM and
+ *	relevant procedure to be called.
+ */
+struct bts_header {
+	u32 magic;
+	u32 version;
+	u8 future[24];
+	u8 actions[0];
+} __attribute__ ((packed));
+
+/**
+ * struct bts_action - Each .bts action has its own type of
+ *	data.
+ */
+struct bts_action {
+	u16 type;
+	u16 size;
+	u8 data[0];
+} __attribute__ ((packed));
+
+struct bts_action_send {
+	u8 data[0];
+} __attribute__ ((packed));
+
+struct bts_action_wait {
+	u32 msec;
+	u32 size;
+	u8 data[0];
+} __attribute__ ((packed));
+
+struct bts_action_delay {
+	u32 msec;
+} __attribute__ ((packed));
+
+struct bts_action_serial {
+	u32 baud;
+	u32 flow_control;
+} __attribute__ ((packed));
+
+/**
+ * struct hci_command - the HCI-VS for intrepreting
+ *	the change baud rate of host-side UART, which
+ *	needs to be ignored, since UIM would do that
+ *	when it receives request from KIM for ldisc installation.
+ */
+struct hci_command {
+	u8 prefix;
+	u16 opcode;
+	u8 plen;
+	u32 speed;
+} __attribute__ ((packed));
+
+/*
+ * header information used by st_ll.c
+ */
+
+/* ST LL receiver states */
+#define ST_W4_PACKET_TYPE       0
+#define ST_W4_HEADER		1
+#define ST_W4_DATA		2
+
+/* ST LL state machines */
+#define ST_LL_ASLEEP               0
+#define ST_LL_ASLEEP_TO_AWAKE      1
+#define ST_LL_AWAKE                2
+#define ST_LL_AWAKE_TO_ASLEEP      3
+#define ST_LL_INVALID		   4
+
+/* different PM notifications coming from chip */
+#define LL_SLEEP_IND	0x30
+#define LL_SLEEP_ACK	0x31
+#define LL_WAKE_UP_IND	0x32
+#define LL_WAKE_UP_ACK	0x33
+
+/* initialize and de-init ST LL */
+long st_ll_init(struct st_data_s *);
+long st_ll_deinit(struct st_data_s *);
+
+/**
+ * enable/disable ST LL along with KIM start/stop
+ * called by ST Core
+ */
+void st_ll_enable(struct st_data_s *);
+void st_ll_disable(struct st_data_s *);
+
+/**
+ * various funcs used by ST core to set/get the various PM states
+ * of the chip.
+ */
+unsigned long st_ll_getstate(struct st_data_s *);
+unsigned long st_ll_sleep_state(struct st_data_s *, unsigned char);
+void st_ll_wakeup(struct st_data_s *);
+
+/*
+ * header information used by st_core.c for FM and GPS
+ * packet parsing, the bluetooth headers are already available
+ * at net/bluetooth/
+ */
+
+struct fm_event_hdr {
+	u8 plen;
+} __attribute__ ((packed));
+
+#define FM_MAX_FRAME_SIZE 0xFF	/* TODO: */
+#define FM_EVENT_HDR_SIZE 1	/* size of fm_event_hdr */
+#define ST_FM_CH8_PKT 0x8
+
+/* gps stuff */
+struct gps_event_hdr {
+	u8 opcode;
+	u16 plen;
+} __attribute__ ((packed));
+
+/**
+ * struct ti_st_plat_data - platform data shared between ST driver and
+ *	platform specific board file which adds the ST device.
+ * @nshutdown_gpio: Host's GPIO line to which chip's BT_EN is connected.
+ * @dev_name: The UART/TTY name to which chip is interfaced. (eg: /dev/ttyS1)
+ * @flow_cntrl: Should always be 1, since UART's CTS/RTS is used for PM
+ *	purposes.
+ * @baud_rate: The baud rate supported by the Host UART controller, this will
+ *	be shared across with the chip via a HCI VS command from User-Space Init
+ *	Mgr application.
+ * @suspend:
+ * @resume: legacy PM routines hooked to platform specific board file, so as
+ *	to take chip-host interface specific action.
+ * @chip_enable:
+ * @chip_disable: Platform/Interface specific mux mode setting, GPIO
+ *	configuring, Host side PM disabling etc.. can be done here.
+ * @chip_asleep:
+ * @chip_awake: Chip specific deep sleep states is communicated to Host
+ *	specific board-xx.c to take actions such as cut UART clocks when chip
+ *	asleep or run host faster when chip awake etc..
+ *
+ */
+struct ti_st_plat_data {
+	long nshutdown_gpio;
+	unsigned char dev_name[UART_DEV_NAME_LEN]; /* uart name */
+	unsigned char flow_cntrl; /* flow control flag */
+	unsigned long baud_rate;
+	int (*suspend)(struct platform_device *, pm_message_t);
+	int (*resume)(struct platform_device *);
+	int (*chip_enable) (struct kim_data_s *);
+	int (*chip_disable) (struct kim_data_s *);
+	int (*chip_asleep) (struct kim_data_s *);
+	int (*chip_awake) (struct kim_data_s *);
+};
+
+#endif /* TI_WILINK_ST_H */
diff --git a/include/linux/tick.h b/include/linux/tick.h
new file mode 100644
index 00000000..ab8be90b
--- /dev/null
+++ b/include/linux/tick.h
@@ -0,0 +1,145 @@
+/*  linux/include/linux/tick.h
+ *
+ *  This file contains the structure definitions for tick related functions
+ *
+ */
+#ifndef _LINUX_TICK_H
+#define _LINUX_TICK_H
+
+#include <linux/clockchips.h>
+#include <linux/irqflags.h>
+
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+
+enum tick_device_mode {
+	TICKDEV_MODE_PERIODIC,
+	TICKDEV_MODE_ONESHOT,
+};
+
+struct tick_device {
+	struct clock_event_device *evtdev;
+	enum tick_device_mode mode;
+};
+
+enum tick_nohz_mode {
+	NOHZ_MODE_INACTIVE,
+	NOHZ_MODE_LOWRES,
+	NOHZ_MODE_HIGHRES,
+};
+
+/**
+ * struct tick_sched - sched tick emulation and no idle tick control/stats
+ * @sched_timer:	hrtimer to schedule the periodic tick in high
+ *			resolution mode
+ * @idle_tick:		Store the last idle tick expiry time when the tick
+ *			timer is modified for idle sleeps. This is necessary
+ *			to resume the tick timer operation in the timeline
+ *			when the CPU returns from idle
+ * @tick_stopped:	Indicator that the idle tick has been stopped
+ * @idle_jiffies:	jiffies at the entry to idle for idle time accounting
+ * @idle_calls:		Total number of idle calls
+ * @idle_sleeps:	Number of idle calls, where the sched tick was stopped
+ * @idle_entrytime:	Time when the idle call was entered
+ * @idle_waketime:	Time when the idle was interrupted
+ * @idle_exittime:	Time when the idle state was left
+ * @idle_sleeptime:	Sum of the time slept in idle with sched tick stopped
+ * @iowait_sleeptime:	Sum of the time slept in idle with sched tick stopped, with IO outstanding
+ * @sleep_length:	Duration of the current idle sleep
+ * @do_timer_lst:	CPU was the last one doing do_timer before going idle
+ */
+struct tick_sched {
+	struct hrtimer			sched_timer;
+	unsigned long			check_clocks;
+	enum tick_nohz_mode		nohz_mode;
+	ktime_t				idle_tick;
+	int				inidle;
+	int				tick_stopped;
+	unsigned long			idle_jiffies;
+	unsigned long			idle_calls;
+	unsigned long			idle_sleeps;
+	int				idle_active;
+	ktime_t				idle_entrytime;
+	ktime_t				idle_waketime;
+	ktime_t				idle_exittime;
+	ktime_t				idle_sleeptime;
+	ktime_t				iowait_sleeptime;
+	ktime_t				sleep_length;
+	unsigned long			last_jiffies;
+	unsigned long			next_jiffies;
+	ktime_t				idle_expires;
+	int				do_timer_last;
+};
+
+extern void __init tick_init(void);
+extern int tick_is_oneshot_available(void);
+extern struct tick_device *tick_get_device(int cpu);
+
+# ifdef CONFIG_HIGH_RES_TIMERS
+extern int tick_init_highres(void);
+extern int tick_program_event(ktime_t expires, int force);
+extern void tick_setup_sched_timer(void);
+# endif
+
+# if defined CONFIG_NO_HZ || defined CONFIG_HIGH_RES_TIMERS
+extern void tick_cancel_sched_timer(int cpu);
+# else
+static inline void tick_cancel_sched_timer(int cpu) { }
+# endif
+
+# ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
+extern struct tick_device *tick_get_broadcast_device(void);
+extern struct cpumask *tick_get_broadcast_mask(void);
+
+#  ifdef CONFIG_TICK_ONESHOT
+extern struct cpumask *tick_get_broadcast_oneshot_mask(void);
+#  endif
+
+# endif /* BROADCAST */
+
+# ifdef CONFIG_TICK_ONESHOT
+extern void tick_clock_notify(void);
+extern int tick_check_oneshot_change(int allow_nohz);
+extern struct tick_sched *tick_get_tick_sched(int cpu);
+extern void tick_check_idle(int cpu);
+extern int tick_oneshot_mode_active(void);
+#  ifndef arch_needs_cpu
+#   define arch_needs_cpu(cpu) (0)
+#  endif
+# else
+static inline void tick_clock_notify(void) { }
+static inline int tick_check_oneshot_change(int allow_nohz) { return 0; }
+static inline void tick_check_idle(int cpu) { }
+static inline int tick_oneshot_mode_active(void) { return 0; }
+# endif
+
+#else /* CONFIG_GENERIC_CLOCKEVENTS */
+static inline void tick_init(void) { }
+static inline void tick_cancel_sched_timer(int cpu) { }
+static inline void tick_clock_notify(void) { }
+static inline int tick_check_oneshot_change(int allow_nohz) { return 0; }
+static inline void tick_check_idle(int cpu) { }
+static inline int tick_oneshot_mode_active(void) { return 0; }
+#endif /* !CONFIG_GENERIC_CLOCKEVENTS */
+
+# ifdef CONFIG_NO_HZ
+extern void tick_nohz_idle_enter(void);
+extern void tick_nohz_idle_exit(void);
+extern void tick_nohz_irq_exit(void);
+extern ktime_t tick_nohz_get_sleep_length(void);
+extern u64 get_cpu_idle_time_us(int cpu, u64 *last_update_time);
+extern u64 get_cpu_iowait_time_us(int cpu, u64 *last_update_time);
+# else
+static inline void tick_nohz_idle_enter(void) { }
+static inline void tick_nohz_idle_exit(void) { }
+
+static inline ktime_t tick_nohz_get_sleep_length(void)
+{
+	ktime_t len = { .tv64 = NSEC_PER_SEC/HZ };
+
+	return len;
+}
+static inline u64 get_cpu_idle_time_us(int cpu, u64 *unused) { return -1; }
+static inline u64 get_cpu_iowait_time_us(int cpu, u64 *unused) { return -1; }
+# endif /* !NO_HZ */
+
+#endif
diff --git a/include/linux/tifm.h b/include/linux/tifm.h
new file mode 100644
index 00000000..848c0f39
--- /dev/null
+++ b/include/linux/tifm.h
@@ -0,0 +1,164 @@
+/*
+ *  tifm.h - TI FlashMedia driver
+ *
+ *  Copyright (C) 2006 Alex Dubov <oakad@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _TIFM_H
+#define _TIFM_H
+
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/workqueue.h>
+
+/* Host registers (relative to pci base address): */
+enum {
+	FM_SET_INTERRUPT_ENABLE   = 0x008,
+	FM_CLEAR_INTERRUPT_ENABLE = 0x00c,
+	FM_INTERRUPT_STATUS       = 0x014
+};
+
+/* Socket registers (relative to socket base address): */
+enum {
+	SOCK_CONTROL                   = 0x004,
+	SOCK_PRESENT_STATE             = 0x008,
+	SOCK_DMA_ADDRESS               = 0x00c,
+	SOCK_DMA_CONTROL               = 0x010,
+	SOCK_DMA_FIFO_INT_ENABLE_SET   = 0x014,
+	SOCK_DMA_FIFO_INT_ENABLE_CLEAR = 0x018,
+	SOCK_DMA_FIFO_STATUS           = 0x020,
+	SOCK_FIFO_CONTROL              = 0x024,
+	SOCK_FIFO_PAGE_SIZE            = 0x028,
+	SOCK_MMCSD_COMMAND             = 0x104,
+	SOCK_MMCSD_ARG_LOW             = 0x108,
+	SOCK_MMCSD_ARG_HIGH            = 0x10c,
+	SOCK_MMCSD_CONFIG              = 0x110,
+	SOCK_MMCSD_STATUS              = 0x114,
+	SOCK_MMCSD_INT_ENABLE          = 0x118,
+	SOCK_MMCSD_COMMAND_TO          = 0x11c,
+	SOCK_MMCSD_DATA_TO             = 0x120,
+	SOCK_MMCSD_DATA                = 0x124,
+	SOCK_MMCSD_BLOCK_LEN           = 0x128,
+	SOCK_MMCSD_NUM_BLOCKS          = 0x12c,
+	SOCK_MMCSD_BUFFER_CONFIG       = 0x130,
+	SOCK_MMCSD_SPI_CONFIG          = 0x134,
+	SOCK_MMCSD_SDIO_MODE_CONFIG    = 0x138,
+	SOCK_MMCSD_RESPONSE            = 0x144,
+	SOCK_MMCSD_SDIO_SR             = 0x164,
+	SOCK_MMCSD_SYSTEM_CONTROL      = 0x168,
+	SOCK_MMCSD_SYSTEM_STATUS       = 0x16c,
+	SOCK_MS_COMMAND                = 0x184,
+	SOCK_MS_DATA                   = 0x188,
+	SOCK_MS_STATUS                 = 0x18c,
+	SOCK_MS_SYSTEM                 = 0x190,
+	SOCK_FIFO_ACCESS               = 0x200
+};
+
+#define TIFM_CTRL_LED             0x00000040
+#define TIFM_CTRL_FAST_CLK        0x00000100
+#define TIFM_CTRL_POWER_MASK      0x00000007
+
+#define TIFM_SOCK_STATE_OCCUPIED  0x00000008
+#define TIFM_SOCK_STATE_POWERED   0x00000080
+
+#define TIFM_FIFO_ENABLE          0x00000001
+#define TIFM_FIFO_READY           0x00000001
+#define TIFM_FIFO_MORE            0x00000008
+#define TIFM_FIFO_INT_SETALL      0x0000ffff
+#define TIFM_FIFO_INTMASK         0x00000005
+
+#define TIFM_DMA_RESET            0x00000002
+#define TIFM_DMA_TX               0x00008000
+#define TIFM_DMA_EN               0x00000001
+#define TIFM_DMA_TSIZE            0x0000007f
+
+#define TIFM_TYPE_XD 1
+#define TIFM_TYPE_MS 2
+#define TIFM_TYPE_SD 3
+
+struct tifm_device_id {
+	unsigned char type;
+};
+
+struct tifm_driver;
+struct tifm_dev {
+	char __iomem  *addr;
+	spinlock_t    lock;
+	unsigned char type;
+	unsigned int  socket_id;
+
+	void          (*card_event)(struct tifm_dev *sock);
+	void          (*data_event)(struct tifm_dev *sock);
+
+	struct device dev;
+};
+
+struct tifm_driver {
+	struct tifm_device_id *id_table;
+	int                   (*probe)(struct tifm_dev *dev);
+	void                  (*remove)(struct tifm_dev *dev);
+	int                   (*suspend)(struct tifm_dev *dev,
+					 pm_message_t state);
+	int                   (*resume)(struct tifm_dev *dev);
+
+	struct device_driver  driver;
+};
+
+struct tifm_adapter {
+	char __iomem        *addr;
+	spinlock_t          lock;
+	unsigned int        irq_status;
+	unsigned int        socket_change_set;
+	unsigned int        id;
+	unsigned int        num_sockets;
+	struct completion   *finish_me;
+
+	struct work_struct  media_switcher;
+	struct device	    dev;
+
+	void                (*eject)(struct tifm_adapter *fm,
+				     struct tifm_dev *sock);
+	int                 (*has_ms_pif)(struct tifm_adapter *fm,
+					  struct tifm_dev *sock);
+
+	struct tifm_dev     *sockets[0];
+};
+
+struct tifm_adapter *tifm_alloc_adapter(unsigned int num_sockets,
+					struct device *dev);
+int tifm_add_adapter(struct tifm_adapter *fm);
+void tifm_remove_adapter(struct tifm_adapter *fm);
+void tifm_free_adapter(struct tifm_adapter *fm);
+
+void tifm_free_device(struct device *dev);
+struct tifm_dev *tifm_alloc_device(struct tifm_adapter *fm, unsigned int id,
+				   unsigned char type);
+
+int tifm_register_driver(struct tifm_driver *drv);
+void tifm_unregister_driver(struct tifm_driver *drv);
+void tifm_eject(struct tifm_dev *sock);
+int tifm_has_ms_pif(struct tifm_dev *sock);
+int tifm_map_sg(struct tifm_dev *sock, struct scatterlist *sg, int nents,
+		int direction);
+void tifm_unmap_sg(struct tifm_dev *sock, struct scatterlist *sg, int nents,
+		   int direction);
+void tifm_queue_work(struct work_struct *work);
+
+static inline void *tifm_get_drvdata(struct tifm_dev *dev)
+{
+	return dev_get_drvdata(&dev->dev);
+}
+
+static inline void tifm_set_drvdata(struct tifm_dev *dev, void *data)
+{
+	dev_set_drvdata(&dev->dev, data);
+}
+
+#endif
diff --git a/include/linux/timb_dma.h b/include/linux/timb_dma.h
new file mode 100644
index 00000000..bb043e97
--- /dev/null
+++ b/include/linux/timb_dma.h
@@ -0,0 +1,55 @@
+/*
+ * timb_dma.h timberdale FPGA DMA driver defines
+ * Copyright (c) 2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * Timberdale FPGA DMA engine
+ */
+
+#ifndef _LINUX_TIMB_DMA_H
+#define _LINUX_TIMB_DMA_H
+
+/**
+ * struct timb_dma_platform_data_channel - Description of each individual
+ *	DMA channel for the timberdale DMA driver
+ * @rx:			true if this channel handles data in the direction to
+ *	the CPU.
+ * @bytes_per_line:	Number of bytes per line, this is specific for channels
+ *	handling video data. For other channels this shall be left to 0.
+ * @descriptors:	Number of descriptors to allocate for this channel.
+ * @descriptor_elements: Number of elements in each descriptor.
+ *
+ */
+struct timb_dma_platform_data_channel {
+	bool rx;
+	unsigned int bytes_per_line;
+	unsigned int descriptors;
+	unsigned int descriptor_elements;
+};
+
+/**
+ * struct timb_dma_platform_data - Platform data of the timberdale DMA driver
+ * @nr_channels:	Number of defined channels in the channels array.
+ * @channels:		Definition of the each channel.
+ *
+ */
+struct timb_dma_platform_data {
+	unsigned nr_channels;
+	struct timb_dma_platform_data_channel channels[32];
+};
+
+#endif
diff --git a/include/linux/timb_gpio.h b/include/linux/timb_gpio.h
new file mode 100644
index 00000000..ce456eaa
--- /dev/null
+++ b/include/linux/timb_gpio.h
@@ -0,0 +1,37 @@
+/*
+ * timb_gpio.h timberdale FPGA GPIO driver, platform data definition
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _LINUX_TIMB_GPIO_H
+#define _LINUX_TIMB_GPIO_H
+
+/**
+ * struct timbgpio_platform_data - Platform data of the Timberdale GPIO driver
+ * @gpio_base		The number of the first GPIO pin, set to -1 for
+ *			dynamic number allocation.
+ * @nr_pins		Number of pins that is supported by the hardware (1-32)
+ * @irq_base		If IRQ is supported by the hardware, this is the base
+ *			number of IRQ:s. One IRQ per pin will be used. Set to
+ *			-1 if IRQ:s is not supported.
+ */
+struct timbgpio_platform_data {
+	int gpio_base;
+	int nr_pins;
+	int irq_base;
+};
+
+#endif
diff --git a/include/linux/time.h b/include/linux/time.h
new file mode 100644
index 00000000..33a92ead
--- /dev/null
+++ b/include/linux/time.h
@@ -0,0 +1,314 @@
+#ifndef _LINUX_TIME_H
+#define _LINUX_TIME_H
+
+#include <linux/types.h>
+
+#ifdef __KERNEL__
+# include <linux/cache.h>
+# include <linux/seqlock.h>
+# include <linux/math64.h>
+#endif
+
+#ifndef _STRUCT_TIMESPEC
+#define _STRUCT_TIMESPEC
+struct timespec {
+	__kernel_time_t	tv_sec;			/* seconds */
+	long		tv_nsec;		/* nanoseconds */
+};
+#endif
+
+struct timeval {
+	__kernel_time_t		tv_sec;		/* seconds */
+	__kernel_suseconds_t	tv_usec;	/* microseconds */
+};
+
+struct timezone {
+	int	tz_minuteswest;	/* minutes west of Greenwich */
+	int	tz_dsttime;	/* type of dst correction */
+};
+
+#ifdef __KERNEL__
+
+extern struct timezone sys_tz;
+
+/* Parameters used to convert the timespec values: */
+#define MSEC_PER_SEC	1000L
+#define USEC_PER_MSEC	1000L
+#define NSEC_PER_USEC	1000L
+#define NSEC_PER_MSEC	1000000L
+#define USEC_PER_SEC	1000000L
+#define NSEC_PER_SEC	1000000000L
+#define FSEC_PER_SEC	1000000000000000LL
+
+#define TIME_T_MAX	(time_t)((1UL << ((sizeof(time_t) << 3) - 1)) - 1)
+
+static inline int timespec_equal(const struct timespec *a,
+                                 const struct timespec *b)
+{
+	return (a->tv_sec == b->tv_sec) && (a->tv_nsec == b->tv_nsec);
+}
+
+/*
+ * lhs < rhs:  return <0
+ * lhs == rhs: return 0
+ * lhs > rhs:  return >0
+ */
+static inline int timespec_compare(const struct timespec *lhs, const struct timespec *rhs)
+{
+	if (lhs->tv_sec < rhs->tv_sec)
+		return -1;
+	if (lhs->tv_sec > rhs->tv_sec)
+		return 1;
+	return lhs->tv_nsec - rhs->tv_nsec;
+}
+
+static inline int timeval_compare(const struct timeval *lhs, const struct timeval *rhs)
+{
+	if (lhs->tv_sec < rhs->tv_sec)
+		return -1;
+	if (lhs->tv_sec > rhs->tv_sec)
+		return 1;
+	return lhs->tv_usec - rhs->tv_usec;
+}
+
+extern unsigned long mktime(const unsigned int year, const unsigned int mon,
+			    const unsigned int day, const unsigned int hour,
+			    const unsigned int min, const unsigned int sec);
+
+extern void set_normalized_timespec(struct timespec *ts, time_t sec, s64 nsec);
+
+/*
+ * timespec_add_safe assumes both values are positive and checks
+ * for overflow. It will return TIME_T_MAX if the reutrn would be
+ * smaller then either of the arguments.
+ */
+extern struct timespec timespec_add_safe(const struct timespec lhs,
+					 const struct timespec rhs);
+
+
+static inline struct timespec timespec_add(struct timespec lhs,
+						struct timespec rhs)
+{
+	struct timespec ts_delta;
+	set_normalized_timespec(&ts_delta, lhs.tv_sec + rhs.tv_sec,
+				lhs.tv_nsec + rhs.tv_nsec);
+	return ts_delta;
+}
+
+/*
+ * sub = lhs - rhs, in normalized form
+ */
+static inline struct timespec timespec_sub(struct timespec lhs,
+						struct timespec rhs)
+{
+	struct timespec ts_delta;
+	set_normalized_timespec(&ts_delta, lhs.tv_sec - rhs.tv_sec,
+				lhs.tv_nsec - rhs.tv_nsec);
+	return ts_delta;
+}
+
+/*
+ * Returns true if the timespec is norm, false if denorm:
+ */
+#define timespec_valid(ts) \
+	(((ts)->tv_sec >= 0) && (((unsigned long) (ts)->tv_nsec) < NSEC_PER_SEC))
+
+extern void read_persistent_clock(struct timespec *ts);
+extern void read_boot_clock(struct timespec *ts);
+extern int update_persistent_clock(struct timespec now);
+void timekeeping_init(void);
+extern int timekeeping_suspended;
+
+unsigned long get_seconds(void);
+struct timespec current_kernel_time(void);
+struct timespec __current_kernel_time(void); /* does not take xtime_lock */
+struct timespec get_monotonic_coarse(void);
+void get_xtime_and_monotonic_and_sleep_offset(struct timespec *xtim,
+				struct timespec *wtom, struct timespec *sleep);
+void timekeeping_inject_sleeptime(struct timespec *delta);
+
+#define CURRENT_TIME		(current_kernel_time())
+#define CURRENT_TIME_SEC	((struct timespec) { get_seconds(), 0 })
+
+/* Some architectures do not supply their own clocksource.
+ * This is mainly the case in architectures that get their
+ * inter-tick times by reading the counter on their interval
+ * timer. Since these timers wrap every tick, they're not really
+ * useful as clocksources. Wrapping them to act like one is possible
+ * but not very efficient. So we provide a callout these arches
+ * can implement for use with the jiffies clocksource to provide
+ * finer then tick granular time.
+ */
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
+extern u32 arch_gettimeoffset(void);
+#else
+static inline u32 arch_gettimeoffset(void) { return 0; }
+#endif
+
+extern void do_gettimeofday(struct timeval *tv);
+extern int do_settimeofday(const struct timespec *tv);
+extern int do_sys_settimeofday(const struct timespec *tv,
+			       const struct timezone *tz);
+#define do_posix_clock_monotonic_gettime(ts) ktime_get_ts(ts)
+extern long do_utimes(int dfd, const char __user *filename, struct timespec *times, int flags);
+struct itimerval;
+extern int do_setitimer(int which, struct itimerval *value,
+			struct itimerval *ovalue);
+extern unsigned int alarm_setitimer(unsigned int seconds);
+extern int do_getitimer(int which, struct itimerval *value);
+extern void getnstimeofday(struct timespec *tv);
+extern void getrawmonotonic(struct timespec *ts);
+extern void getnstime_raw_and_real(struct timespec *ts_raw,
+		struct timespec *ts_real);
+extern void getboottime(struct timespec *ts);
+extern void monotonic_to_bootbased(struct timespec *ts);
+extern void get_monotonic_boottime(struct timespec *ts);
+
+extern struct timespec timespec_trunc(struct timespec t, unsigned gran);
+extern int timekeeping_valid_for_hres(void);
+extern u64 timekeeping_max_deferment(void);
+extern void timekeeping_leap_insert(int leapsecond);
+extern int timekeeping_inject_offset(struct timespec *ts);
+
+struct tms;
+extern void do_sys_times(struct tms *);
+
+/*
+ * Similar to the struct tm in userspace <time.h>, but it needs to be here so
+ * that the kernel source is self contained.
+ */
+struct tm {
+	/*
+	 * the number of seconds after the minute, normally in the range
+	 * 0 to 59, but can be up to 60 to allow for leap seconds
+	 */
+	int tm_sec;
+	/* the number of minutes after the hour, in the range 0 to 59*/
+	int tm_min;
+	/* the number of hours past midnight, in the range 0 to 23 */
+	int tm_hour;
+	/* the day of the month, in the range 1 to 31 */
+	int tm_mday;
+	/* the number of months since January, in the range 0 to 11 */
+	int tm_mon;
+	/* the number of years since 1900 */
+	long tm_year;
+	/* the number of days since Sunday, in the range 0 to 6 */
+	int tm_wday;
+	/* the number of days since January 1, in the range 0 to 365 */
+	int tm_yday;
+};
+
+void time_to_tm(time_t totalsecs, int offset, struct tm *result);
+
+/**
+ * timespec_to_ns - Convert timespec to nanoseconds
+ * @ts:		pointer to the timespec variable to be converted
+ *
+ * Returns the scalar nanosecond representation of the timespec
+ * parameter.
+ */
+static inline s64 timespec_to_ns(const struct timespec *ts)
+{
+	return ((s64) ts->tv_sec * NSEC_PER_SEC) + ts->tv_nsec;
+}
+
+/**
+ * timeval_to_ns - Convert timeval to nanoseconds
+ * @ts:		pointer to the timeval variable to be converted
+ *
+ * Returns the scalar nanosecond representation of the timeval
+ * parameter.
+ */
+static inline s64 timeval_to_ns(const struct timeval *tv)
+{
+	return ((s64) tv->tv_sec * NSEC_PER_SEC) +
+		tv->tv_usec * NSEC_PER_USEC;
+}
+
+/**
+ * ns_to_timespec - Convert nanoseconds to timespec
+ * @nsec:	the nanoseconds value to be converted
+ *
+ * Returns the timespec representation of the nsec parameter.
+ */
+extern struct timespec ns_to_timespec(const s64 nsec);
+
+/**
+ * ns_to_timeval - Convert nanoseconds to timeval
+ * @nsec:	the nanoseconds value to be converted
+ *
+ * Returns the timeval representation of the nsec parameter.
+ */
+extern struct timeval ns_to_timeval(const s64 nsec);
+
+/**
+ * timespec_add_ns - Adds nanoseconds to a timespec
+ * @a:		pointer to timespec to be incremented
+ * @ns:		unsigned nanoseconds value to be added
+ *
+ * This must always be inlined because its used from the x86-64 vdso,
+ * which cannot call other kernel functions.
+ */
+static __always_inline void timespec_add_ns(struct timespec *a, u64 ns)
+{
+	a->tv_sec += __iter_div_u64_rem(a->tv_nsec + ns, NSEC_PER_SEC, &ns);
+	a->tv_nsec = ns;
+}
+
+#endif /* __KERNEL__ */
+
+#define NFDBITS			__NFDBITS
+
+#define FD_SETSIZE		__FD_SETSIZE
+#define FD_SET(fd,fdsetp)	__FD_SET(fd,fdsetp)
+#define FD_CLR(fd,fdsetp)	__FD_CLR(fd,fdsetp)
+#define FD_ISSET(fd,fdsetp)	__FD_ISSET(fd,fdsetp)
+#define FD_ZERO(fdsetp)		__FD_ZERO(fdsetp)
+
+/*
+ * Names of the interval timers, and structure
+ * defining a timer setting:
+ */
+#define	ITIMER_REAL		0
+#define	ITIMER_VIRTUAL		1
+#define	ITIMER_PROF		2
+
+struct itimerspec {
+	struct timespec it_interval;	/* timer period */
+	struct timespec it_value;	/* timer expiration */
+};
+
+struct itimerval {
+	struct timeval it_interval;	/* timer interval */
+	struct timeval it_value;	/* current value */
+};
+
+/*
+ * The IDs of the various system clocks (for POSIX.1b interval timers):
+ */
+#define CLOCK_REALTIME			0
+#define CLOCK_MONOTONIC			1
+#define CLOCK_PROCESS_CPUTIME_ID	2
+#define CLOCK_THREAD_CPUTIME_ID		3
+#define CLOCK_MONOTONIC_RAW		4
+#define CLOCK_REALTIME_COARSE		5
+#define CLOCK_MONOTONIC_COARSE		6
+#define CLOCK_BOOTTIME			7
+#define CLOCK_REALTIME_ALARM		8
+#define CLOCK_BOOTTIME_ALARM		9
+
+/*
+ * The IDs of various hardware clocks:
+ */
+#define CLOCK_SGI_CYCLE			10
+#define MAX_CLOCKS			16
+#define CLOCKS_MASK			(CLOCK_REALTIME | CLOCK_MONOTONIC)
+#define CLOCKS_MONO			CLOCK_MONOTONIC
+
+/*
+ * The various flags for setting POSIX.1b interval timers:
+ */
+#define TIMER_ABSTIME			0x01
+
+#endif
diff --git a/include/linux/timecompare.h b/include/linux/timecompare.h
new file mode 100644
index 00000000..546e2234
--- /dev/null
+++ b/include/linux/timecompare.h
@@ -0,0 +1,125 @@
+/*
+ * Utility code which helps transforming between two different time
+ * bases, called "source" and "target" time in this code.
+ *
+ * Source time has to be provided via the timecounter API while target
+ * time is accessed via a function callback whose prototype
+ * intentionally matches ktime_get() and ktime_get_real(). These
+ * interfaces where chosen like this so that the code serves its
+ * initial purpose without additional glue code.
+ *
+ * This purpose is synchronizing a hardware clock in a NIC with system
+ * time, in order to implement the Precision Time Protocol (PTP,
+ * IEEE1588) with more accurate hardware assisted time stamping.  In
+ * that context only synchronization against system time (=
+ * ktime_get_real()) is currently needed. But this utility code might
+ * become useful in other situations, which is why it was written as
+ * general purpose utility code.
+ *
+ * The source timecounter is assumed to return monotonically
+ * increasing time (but this code does its best to compensate if that
+ * is not the case) whereas target time may jump.
+ *
+ * The target time corresponding to a source time is determined by
+ * reading target time, reading source time, reading target time
+ * again, then assuming that average target time corresponds to source
+ * time. In other words, the assumption is that reading the source
+ * time is slow and involves equal time for sending the request and
+ * receiving the reply, whereas reading target time is assumed to be
+ * fast.
+ *
+ * Copyright (C) 2009 Intel Corporation.
+ * Author: Patrick Ohly <patrick.ohly@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef _LINUX_TIMECOMPARE_H
+#define _LINUX_TIMECOMPARE_H
+
+#include <linux/clocksource.h>
+#include <linux/ktime.h>
+
+/**
+ * struct timecompare - stores state and configuration for the two clocks
+ *
+ * Initialize to zero, then set source/target/num_samples.
+ *
+ * Transformation between source time and target time is done with:
+ * target_time = source_time + offset +
+ *               (source_time - last_update) * skew /
+ *               TIMECOMPARE_SKEW_RESOLUTION
+ *
+ * @source:          used to get source time stamps via timecounter_read()
+ * @target:          function returning target time (for example, ktime_get
+ *                   for monotonic time, or ktime_get_real for wall clock)
+ * @num_samples:     number of times that source time and target time are to
+ *                   be compared when determining their offset
+ * @offset:          (target time - source time) at the time of the last update
+ * @skew:            average (target time - source time) / delta source time *
+ *                   TIMECOMPARE_SKEW_RESOLUTION
+ * @last_update:     last source time stamp when time offset was measured
+ */
+struct timecompare {
+	struct timecounter *source;
+	ktime_t (*target)(void);
+	int num_samples;
+
+	s64 offset;
+	s64 skew;
+	u64 last_update;
+};
+
+/**
+ * timecompare_transform - transform source time stamp into target time base
+ * @sync:            context for time sync
+ * @source_tstamp:   the result of timecounter_read() or
+ *                   timecounter_cyc2time()
+ */
+extern ktime_t timecompare_transform(struct timecompare *sync,
+				     u64 source_tstamp);
+
+/**
+ * timecompare_offset - measure current (target time - source time) offset
+ * @sync:            context for time sync
+ * @offset:          average offset during sample period returned here
+ * @source_tstamp:   average source time during sample period returned here
+ *
+ * Returns number of samples used. Might be zero (= no result) in the
+ * unlikely case that target time was monotonically decreasing for all
+ * samples (= broken).
+ */
+extern int timecompare_offset(struct timecompare *sync,
+			      s64 *offset,
+			      u64 *source_tstamp);
+
+extern void __timecompare_update(struct timecompare *sync,
+				 u64 source_tstamp);
+
+/**
+ * timecompare_update - update offset and skew by measuring current offset
+ * @sync:            context for time sync
+ * @source_tstamp:   the result of timecounter_read() or
+ *                   timecounter_cyc2time(), pass zero to force update
+ *
+ * Updates are only done at most once per second.
+ */
+static inline void timecompare_update(struct timecompare *sync,
+				      u64 source_tstamp)
+{
+	if (!source_tstamp ||
+	    (s64)(source_tstamp - sync->last_update) >= NSEC_PER_SEC)
+		__timecompare_update(sync, source_tstamp);
+}
+
+#endif /* _LINUX_TIMECOMPARE_H */
diff --git a/include/linux/timer.h b/include/linux/timer.h
new file mode 100644
index 00000000..6abd9138
--- /dev/null
+++ b/include/linux/timer.h
@@ -0,0 +1,302 @@
+#ifndef _LINUX_TIMER_H
+#define _LINUX_TIMER_H
+
+#include <linux/list.h>
+#include <linux/ktime.h>
+#include <linux/stddef.h>
+#include <linux/debugobjects.h>
+#include <linux/stringify.h>
+
+struct tvec_base;
+
+struct timer_list {
+	/*
+	 * All fields that change during normal runtime grouped to the
+	 * same cacheline
+	 */
+	struct list_head entry;
+	unsigned long expires;
+	struct tvec_base *base;
+
+	void (*function)(unsigned long);
+	unsigned long data;
+
+	int slack;
+
+#ifdef CONFIG_TIMER_STATS
+	int start_pid;
+	void *start_site;
+	char start_comm[16];
+#endif
+#ifdef CONFIG_LOCKDEP
+	struct lockdep_map lockdep_map;
+#endif
+};
+
+extern struct tvec_base boot_tvec_bases;
+
+#ifdef CONFIG_LOCKDEP
+/*
+ * NB: because we have to copy the lockdep_map, setting the lockdep_map key
+ * (second argument) here is required, otherwise it could be initialised to
+ * the copy of the lockdep_map later! We use the pointer to and the string
+ * "<file>:<line>" as the key resp. the name of the lockdep_map.
+ */
+#define __TIMER_LOCKDEP_MAP_INITIALIZER(_kn)				\
+	.lockdep_map = STATIC_LOCKDEP_MAP_INIT(_kn, &_kn),
+#else
+#define __TIMER_LOCKDEP_MAP_INITIALIZER(_kn)
+#endif
+
+/*
+ * Note that all tvec_bases are 2 byte aligned and lower bit of
+ * base in timer_list is guaranteed to be zero. Use the LSB to
+ * indicate whether the timer is deferrable.
+ *
+ * A deferrable timer will work normally when the system is busy, but
+ * will not cause a CPU to come out of idle just to service it; instead,
+ * the timer will be serviced when the CPU eventually wakes up with a
+ * subsequent non-deferrable timer.
+ */
+#define TBASE_DEFERRABLE_FLAG		(0x1)
+
+#define TIMER_INITIALIZER(_function, _expires, _data) {		\
+		.entry = { .prev = TIMER_ENTRY_STATIC },	\
+		.function = (_function),			\
+		.expires = (_expires),				\
+		.data = (_data),				\
+		.base = &boot_tvec_bases,			\
+		.slack = -1,					\
+		__TIMER_LOCKDEP_MAP_INITIALIZER(		\
+			__FILE__ ":" __stringify(__LINE__))	\
+	}
+
+#define TBASE_MAKE_DEFERRED(ptr) ((struct tvec_base *)		\
+		  ((unsigned char *)(ptr) + TBASE_DEFERRABLE_FLAG))
+
+#define TIMER_DEFERRED_INITIALIZER(_function, _expires, _data) {\
+		.entry = { .prev = TIMER_ENTRY_STATIC },	\
+		.function = (_function),			\
+		.expires = (_expires),				\
+		.data = (_data),				\
+		.base = TBASE_MAKE_DEFERRED(&boot_tvec_bases),	\
+		__TIMER_LOCKDEP_MAP_INITIALIZER(		\
+			__FILE__ ":" __stringify(__LINE__))	\
+	}
+
+#define DEFINE_TIMER(_name, _function, _expires, _data)		\
+	struct timer_list _name =				\
+		TIMER_INITIALIZER(_function, _expires, _data)
+
+void init_timer_key(struct timer_list *timer,
+		    const char *name,
+		    struct lock_class_key *key);
+void init_timer_deferrable_key(struct timer_list *timer,
+			       const char *name,
+			       struct lock_class_key *key);
+
+#ifdef CONFIG_LOCKDEP
+#define init_timer(timer)						\
+	do {								\
+		static struct lock_class_key __key;			\
+		init_timer_key((timer), #timer, &__key);		\
+	} while (0)
+
+#define init_timer_deferrable(timer)					\
+	do {								\
+		static struct lock_class_key __key;			\
+		init_timer_deferrable_key((timer), #timer, &__key);	\
+	} while (0)
+
+#define init_timer_on_stack(timer)					\
+	do {								\
+		static struct lock_class_key __key;			\
+		init_timer_on_stack_key((timer), #timer, &__key);	\
+	} while (0)
+
+#define setup_timer(timer, fn, data)					\
+	do {								\
+		static struct lock_class_key __key;			\
+		setup_timer_key((timer), #timer, &__key, (fn), (data));\
+	} while (0)
+
+#define setup_timer_on_stack(timer, fn, data)				\
+	do {								\
+		static struct lock_class_key __key;			\
+		setup_timer_on_stack_key((timer), #timer, &__key,	\
+					 (fn), (data));			\
+	} while (0)
+#define setup_deferrable_timer_on_stack(timer, fn, data)		\
+	do {								\
+		static struct lock_class_key __key;			\
+		setup_deferrable_timer_on_stack_key((timer), #timer,	\
+						    &__key, (fn),	\
+						    (data));		\
+	} while (0)
+#else
+#define init_timer(timer)\
+	init_timer_key((timer), NULL, NULL)
+#define init_timer_deferrable(timer)\
+	init_timer_deferrable_key((timer), NULL, NULL)
+#define init_timer_on_stack(timer)\
+	init_timer_on_stack_key((timer), NULL, NULL)
+#define setup_timer(timer, fn, data)\
+	setup_timer_key((timer), NULL, NULL, (fn), (data))
+#define setup_timer_on_stack(timer, fn, data)\
+	setup_timer_on_stack_key((timer), NULL, NULL, (fn), (data))
+#define setup_deferrable_timer_on_stack(timer, fn, data)\
+	setup_deferrable_timer_on_stack_key((timer), NULL, NULL, (fn), (data))
+#endif
+
+#ifdef CONFIG_DEBUG_OBJECTS_TIMERS
+extern void init_timer_on_stack_key(struct timer_list *timer,
+				    const char *name,
+				    struct lock_class_key *key);
+extern void destroy_timer_on_stack(struct timer_list *timer);
+#else
+static inline void destroy_timer_on_stack(struct timer_list *timer) { }
+static inline void init_timer_on_stack_key(struct timer_list *timer,
+					   const char *name,
+					   struct lock_class_key *key)
+{
+	init_timer_key(timer, name, key);
+}
+#endif
+
+static inline void setup_timer_key(struct timer_list * timer,
+				const char *name,
+				struct lock_class_key *key,
+				void (*function)(unsigned long),
+				unsigned long data)
+{
+	timer->function = function;
+	timer->data = data;
+	init_timer_key(timer, name, key);
+}
+
+static inline void setup_timer_on_stack_key(struct timer_list *timer,
+					const char *name,
+					struct lock_class_key *key,
+					void (*function)(unsigned long),
+					unsigned long data)
+{
+	timer->function = function;
+	timer->data = data;
+	init_timer_on_stack_key(timer, name, key);
+}
+
+extern void setup_deferrable_timer_on_stack_key(struct timer_list *timer,
+						const char *name,
+						struct lock_class_key *key,
+						void (*function)(unsigned long),
+						unsigned long data);
+
+/**
+ * timer_pending - is a timer pending?
+ * @timer: the timer in question
+ *
+ * timer_pending will tell whether a given timer is currently pending,
+ * or not. Callers must ensure serialization wrt. other operations done
+ * to this timer, eg. interrupt contexts, or other CPUs on SMP.
+ *
+ * return value: 1 if the timer is pending, 0 if not.
+ */
+static inline int timer_pending(const struct timer_list * timer)
+{
+	return timer->entry.next != NULL;
+}
+
+extern void add_timer_on(struct timer_list *timer, int cpu);
+extern int del_timer(struct timer_list * timer);
+extern int mod_timer(struct timer_list *timer, unsigned long expires);
+extern int mod_timer_pending(struct timer_list *timer, unsigned long expires);
+extern int mod_timer_pinned(struct timer_list *timer, unsigned long expires);
+
+extern void set_timer_slack(struct timer_list *time, int slack_hz);
+
+#define TIMER_NOT_PINNED	0
+#define TIMER_PINNED		1
+/*
+ * The jiffies value which is added to now, when there is no timer
+ * in the timer wheel:
+ */
+#define NEXT_TIMER_MAX_DELTA	((1UL << 30) - 1)
+
+/*
+ * Return when the next timer-wheel timeout occurs (in absolute jiffies),
+ * locks the timer base and does the comparison against the given
+ * jiffie.
+ */
+extern unsigned long get_next_timer_interrupt(unsigned long now);
+
+/*
+ * Timer-statistics info:
+ */
+#ifdef CONFIG_TIMER_STATS
+
+extern int timer_stats_active;
+
+#define TIMER_STATS_FLAG_DEFERRABLE	0x1
+
+extern void init_timer_stats(void);
+
+extern void timer_stats_update_stats(void *timer, pid_t pid, void *startf,
+				     void *timerf, char *comm,
+				     unsigned int timer_flag);
+
+extern void __timer_stats_timer_set_start_info(struct timer_list *timer,
+					       void *addr);
+
+static inline void timer_stats_timer_set_start_info(struct timer_list *timer)
+{
+	if (likely(!timer_stats_active))
+		return;
+	__timer_stats_timer_set_start_info(timer, __builtin_return_address(0));
+}
+
+static inline void timer_stats_timer_clear_start_info(struct timer_list *timer)
+{
+	timer->start_site = NULL;
+}
+#else
+static inline void init_timer_stats(void)
+{
+}
+
+static inline void timer_stats_timer_set_start_info(struct timer_list *timer)
+{
+}
+
+static inline void timer_stats_timer_clear_start_info(struct timer_list *timer)
+{
+}
+#endif
+
+extern void add_timer(struct timer_list *timer);
+
+extern int try_to_del_timer_sync(struct timer_list *timer);
+
+#ifdef CONFIG_SMP
+  extern int del_timer_sync(struct timer_list *timer);
+#else
+# define del_timer_sync(t)		del_timer(t)
+#endif
+
+#define del_singleshot_timer_sync(t) del_timer_sync(t)
+
+extern void init_timers(void);
+extern void run_local_timers(void);
+struct hrtimer;
+extern enum hrtimer_restart it_real_fn(struct hrtimer *);
+
+unsigned long __round_jiffies(unsigned long j, int cpu);
+unsigned long __round_jiffies_relative(unsigned long j, int cpu);
+unsigned long round_jiffies(unsigned long j);
+unsigned long round_jiffies_relative(unsigned long j);
+
+unsigned long __round_jiffies_up(unsigned long j, int cpu);
+unsigned long __round_jiffies_up_relative(unsigned long j, int cpu);
+unsigned long round_jiffies_up(unsigned long j);
+unsigned long round_jiffies_up_relative(unsigned long j);
+
+#endif
diff --git a/include/linux/timerfd.h b/include/linux/timerfd.h
new file mode 100644
index 00000000..d3b57fa1
--- /dev/null
+++ b/include/linux/timerfd.h
@@ -0,0 +1,32 @@
+/*
+ *  include/linux/timerfd.h
+ *
+ *  Copyright (C) 2007  Davide Libenzi <davidel@xmailserver.org>
+ *
+ */
+
+#ifndef _LINUX_TIMERFD_H
+#define _LINUX_TIMERFD_H
+
+/* For O_CLOEXEC and O_NONBLOCK */
+#include <linux/fcntl.h>
+
+/*
+ * CAREFUL: Check include/asm-generic/fcntl.h when defining
+ * new flags, since they might collide with O_* ones. We want
+ * to re-use O_* flags that couldn't possibly have a meaning
+ * from eventfd, in order to leave a free define-space for
+ * shared O_* flags.
+ */
+#define TFD_TIMER_ABSTIME (1 << 0)
+#define TFD_TIMER_CANCEL_ON_SET (1 << 1)
+#define TFD_CLOEXEC O_CLOEXEC
+#define TFD_NONBLOCK O_NONBLOCK
+
+#define TFD_SHARED_FCNTL_FLAGS (TFD_CLOEXEC | TFD_NONBLOCK)
+/* Flags for timerfd_create.  */
+#define TFD_CREATE_FLAGS TFD_SHARED_FCNTL_FLAGS
+/* Flags for timerfd_settime.  */
+#define TFD_SETTIME_FLAGS (TFD_TIMER_ABSTIME | TFD_TIMER_CANCEL_ON_SET)
+
+#endif /* _LINUX_TIMERFD_H */
diff --git a/include/linux/timeriomem-rng.h b/include/linux/timeriomem-rng.h
new file mode 100644
index 00000000..3e08a1c8
--- /dev/null
+++ b/include/linux/timeriomem-rng.h
@@ -0,0 +1,21 @@
+/*
+ * linux/include/linux/timeriomem-rng.h
+ *
+ * Copyright (c) 2009 Alexander Clouter <alex@digriz.org.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/completion.h>
+
+struct timeriomem_rng_data {
+	struct completion	completion;
+	unsigned int		present:1;
+
+	void __iomem		*address;
+
+	/* measures in usecs */
+	unsigned int		period;
+};
diff --git a/include/linux/timerqueue.h b/include/linux/timerqueue.h
new file mode 100644
index 00000000..50887274
--- /dev/null
+++ b/include/linux/timerqueue.h
@@ -0,0 +1,50 @@
+#ifndef _LINUX_TIMERQUEUE_H
+#define _LINUX_TIMERQUEUE_H
+
+#include <linux/rbtree.h>
+#include <linux/ktime.h>
+
+
+struct timerqueue_node {
+	struct rb_node node;
+	ktime_t expires;
+};
+
+struct timerqueue_head {
+	struct rb_root head;
+	struct timerqueue_node *next;
+};
+
+
+extern void timerqueue_add(struct timerqueue_head *head,
+				struct timerqueue_node *node);
+extern void timerqueue_del(struct timerqueue_head *head,
+				struct timerqueue_node *node);
+extern struct timerqueue_node *timerqueue_iterate_next(
+						struct timerqueue_node *node);
+
+/**
+ * timerqueue_getnext - Returns the timer with the earliest expiration time
+ *
+ * @head: head of timerqueue
+ *
+ * Returns a pointer to the timer node that has the
+ * earliest expiration time.
+ */
+static inline
+struct timerqueue_node *timerqueue_getnext(struct timerqueue_head *head)
+{
+	return head->next;
+}
+
+static inline void timerqueue_init(struct timerqueue_node *node)
+{
+	rb_init_node(&node->node);
+}
+
+static inline void timerqueue_init_head(struct timerqueue_head *head)
+{
+	head->head = RB_ROOT;
+	head->next = NULL;
+}
+#endif /* _LINUX_TIMERQUEUE_H */
diff --git a/include/linux/times.h b/include/linux/times.h
new file mode 100644
index 00000000..87b62615
--- /dev/null
+++ b/include/linux/times.h
@@ -0,0 +1,13 @@
+#ifndef _LINUX_TIMES_H
+#define _LINUX_TIMES_H
+
+#include <linux/types.h>
+
+struct tms {
+	__kernel_clock_t tms_utime;
+	__kernel_clock_t tms_stime;
+	__kernel_clock_t tms_cutime;
+	__kernel_clock_t tms_cstime;
+};
+
+#endif
diff --git a/include/linux/timex.h b/include/linux/timex.h
new file mode 100644
index 00000000..99bc88b1
--- /dev/null
+++ b/include/linux/timex.h
@@ -0,0 +1,266 @@
+/*****************************************************************************
+ *                                                                           *
+ * Copyright (c) David L. Mills 1993                                         *
+ *                                                                           *
+ * Permission to use, copy, modify, and distribute this software and its     *
+ * documentation for any purpose and without fee is hereby granted, provided *
+ * that the above copyright notice appears in all copies and that both the   *
+ * copyright notice and this permission notice appear in supporting          *
+ * documentation, and that the name University of Delaware not be used in    *
+ * advertising or publicity pertaining to distribution of the software       *
+ * without specific, written prior permission.  The University of Delaware   *
+ * makes no representations about the suitability this software for any      *
+ * purpose.  It is provided "as is" without express or implied warranty.     *
+ *                                                                           *
+ *****************************************************************************/
+
+/*
+ * Modification history timex.h
+ *
+ * 29 Dec 97	Russell King
+ *	Moved CLOCK_TICK_RATE, CLOCK_TICK_FACTOR and FINETUNE to asm/timex.h
+ *	for ARM machines
+ *
+ *  9 Jan 97    Adrian Sun
+ *      Shifted LATCH define to allow access to alpha machines.
+ *
+ * 26 Sep 94	David L. Mills
+ *	Added defines for hybrid phase/frequency-lock loop.
+ *
+ * 19 Mar 94	David L. Mills
+ *	Moved defines from kernel routines to header file and added new
+ *	defines for PPS phase-lock loop.
+ *
+ * 20 Feb 94	David L. Mills
+ *	Revised status codes and structures for external clock and PPS
+ *	signal discipline.
+ *
+ * 28 Nov 93	David L. Mills
+ *	Adjusted parameters to improve stability and increase poll
+ *	interval.
+ *
+ * 17 Sep 93    David L. Mills
+ *      Created file $NTP/include/sys/timex.h
+ * 07 Oct 93    Torsten Duwe
+ *      Derived linux/timex.h
+ * 1995-08-13    Torsten Duwe
+ *      kernel PLL updated to 1994-12-13 specs (rfc-1589)
+ * 1997-08-30    Ulrich Windl
+ *      Added new constant NTP_PHASE_LIMIT
+ * 2004-08-12    Christoph Lameter
+ *      Reworked time interpolation logic
+ */
+#ifndef _LINUX_TIMEX_H
+#define _LINUX_TIMEX_H
+
+#include <linux/time.h>
+
+#define NTP_API		4	/* NTP API version */
+
+/*
+ * syscall interface - used (mainly by NTP daemon)
+ * to discipline kernel clock oscillator
+ */
+struct timex {
+	unsigned int modes;	/* mode selector */
+	long offset;		/* time offset (usec) */
+	long freq;		/* frequency offset (scaled ppm) */
+	long maxerror;		/* maximum error (usec) */
+	long esterror;		/* estimated error (usec) */
+	int status;		/* clock command/status */
+	long constant;		/* pll time constant */
+	long precision;		/* clock precision (usec) (read only) */
+	long tolerance;		/* clock frequency tolerance (ppm)
+				 * (read only)
+				 */
+	struct timeval time;	/* (read only, except for ADJ_SETOFFSET) */
+	long tick;		/* (modified) usecs between clock ticks */
+
+	long ppsfreq;           /* pps frequency (scaled ppm) (ro) */
+	long jitter;            /* pps jitter (us) (ro) */
+	int shift;              /* interval duration (s) (shift) (ro) */
+	long stabil;            /* pps stability (scaled ppm) (ro) */
+	long jitcnt;            /* jitter limit exceeded (ro) */
+	long calcnt;            /* calibration intervals (ro) */
+	long errcnt;            /* calibration errors (ro) */
+	long stbcnt;            /* stability limit exceeded (ro) */
+
+	int tai;		/* TAI offset (ro) */
+
+	int  :32; int  :32; int  :32; int  :32;
+	int  :32; int  :32; int  :32; int  :32;
+	int  :32; int  :32; int  :32;
+};
+
+/*
+ * Mode codes (timex.mode)
+ */
+#define ADJ_OFFSET		0x0001	/* time offset */
+#define ADJ_FREQUENCY		0x0002	/* frequency offset */
+#define ADJ_MAXERROR		0x0004	/* maximum time error */
+#define ADJ_ESTERROR		0x0008	/* estimated time error */
+#define ADJ_STATUS		0x0010	/* clock status */
+#define ADJ_TIMECONST		0x0020	/* pll time constant */
+#define ADJ_TAI			0x0080	/* set TAI offset */
+#define ADJ_SETOFFSET		0x0100  /* add 'time' to current time */
+#define ADJ_MICRO		0x1000	/* select microsecond resolution */
+#define ADJ_NANO		0x2000	/* select nanosecond resolution */
+#define ADJ_TICK		0x4000	/* tick value */
+
+#ifdef __KERNEL__
+#define ADJ_ADJTIME		0x8000	/* switch between adjtime/adjtimex modes */
+#define ADJ_OFFSET_SINGLESHOT	0x0001	/* old-fashioned adjtime */
+#define ADJ_OFFSET_READONLY	0x2000	/* read-only adjtime */
+#else
+#define ADJ_OFFSET_SINGLESHOT	0x8001	/* old-fashioned adjtime */
+#define ADJ_OFFSET_SS_READ	0xa001	/* read-only adjtime */
+#endif
+
+/* NTP userland likes the MOD_ prefix better */
+#define MOD_OFFSET	ADJ_OFFSET
+#define MOD_FREQUENCY	ADJ_FREQUENCY
+#define MOD_MAXERROR	ADJ_MAXERROR
+#define MOD_ESTERROR	ADJ_ESTERROR
+#define MOD_STATUS	ADJ_STATUS
+#define MOD_TIMECONST	ADJ_TIMECONST
+#define MOD_TAI	ADJ_TAI
+#define MOD_MICRO	ADJ_MICRO
+#define MOD_NANO	ADJ_NANO
+
+
+/*
+ * Status codes (timex.status)
+ */
+#define STA_PLL		0x0001	/* enable PLL updates (rw) */
+#define STA_PPSFREQ	0x0002	/* enable PPS freq discipline (rw) */
+#define STA_PPSTIME	0x0004	/* enable PPS time discipline (rw) */
+#define STA_FLL		0x0008	/* select frequency-lock mode (rw) */
+
+#define STA_INS		0x0010	/* insert leap (rw) */
+#define STA_DEL		0x0020	/* delete leap (rw) */
+#define STA_UNSYNC	0x0040	/* clock unsynchronized (rw) */
+#define STA_FREQHOLD	0x0080	/* hold frequency (rw) */
+
+#define STA_PPSSIGNAL	0x0100	/* PPS signal present (ro) */
+#define STA_PPSJITTER	0x0200	/* PPS signal jitter exceeded (ro) */
+#define STA_PPSWANDER	0x0400	/* PPS signal wander exceeded (ro) */
+#define STA_PPSERROR	0x0800	/* PPS signal calibration error (ro) */
+
+#define STA_CLOCKERR	0x1000	/* clock hardware fault (ro) */
+#define STA_NANO	0x2000	/* resolution (0 = us, 1 = ns) (ro) */
+#define STA_MODE	0x4000	/* mode (0 = PLL, 1 = FLL) (ro) */
+#define STA_CLK		0x8000	/* clock source (0 = A, 1 = B) (ro) */
+
+/* read-only bits */
+#define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \
+	STA_PPSERROR | STA_CLOCKERR | STA_NANO | STA_MODE | STA_CLK)
+
+/*
+ * Clock states (time_state)
+ */
+#define TIME_OK		0	/* clock synchronized, no leap second */
+#define TIME_INS	1	/* insert leap second */
+#define TIME_DEL	2	/* delete leap second */
+#define TIME_OOP	3	/* leap second in progress */
+#define TIME_WAIT	4	/* leap second has occurred */
+#define TIME_ERROR	5	/* clock not synchronized */
+#define TIME_BAD	TIME_ERROR /* bw compat */
+
+#ifdef __KERNEL__
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/param.h>
+
+#include <asm/timex.h>
+
+/*
+ * SHIFT_PLL is used as a dampening factor to define how much we
+ * adjust the frequency correction for a given offset in PLL mode.
+ * It also used in dampening the offset correction, to define how
+ * much of the current value in time_offset we correct for each
+ * second. Changing this value changes the stiffness of the ntp
+ * adjustment code. A lower value makes it more flexible, reducing
+ * NTP convergence time. A higher value makes it stiffer, increasing
+ * convergence time, but making the clock more stable.
+ *
+ * In David Mills' nanokernel reference implementation SHIFT_PLL is 4.
+ * However this seems to increase convergence time much too long.
+ *
+ * https://lists.ntp.org/pipermail/hackers/2008-January/003487.html
+ *
+ * In the above mailing list discussion, it seems the value of 4
+ * was appropriate for other Unix systems with HZ=100, and that
+ * SHIFT_PLL should be decreased as HZ increases. However, Linux's
+ * clock steering implementation is HZ independent.
+ *
+ * Through experimentation, a SHIFT_PLL value of 2 was found to allow
+ * for fast convergence (very similar to the NTPv3 code used prior to
+ * v2.6.19), with good clock stability.
+ *
+ *
+ * SHIFT_FLL is used as a dampening factor to define how much we
+ * adjust the frequency correction for a given offset in FLL mode.
+ * In David Mills' nanokernel reference implementation SHIFT_FLL is 2.
+ *
+ * MAXTC establishes the maximum time constant of the PLL.
+ */
+#define SHIFT_PLL	2	/* PLL frequency factor (shift) */
+#define SHIFT_FLL	2	/* FLL frequency factor (shift) */
+#define MAXTC		10	/* maximum time constant (shift) */
+
+/*
+ * SHIFT_USEC defines the scaling (shift) of the time_freq and
+ * time_tolerance variables, which represent the current frequency
+ * offset and maximum frequency tolerance.
+ */
+#define SHIFT_USEC 16		/* frequency offset scale (shift) */
+#define PPM_SCALE ((s64)NSEC_PER_USEC << (NTP_SCALE_SHIFT - SHIFT_USEC))
+#define PPM_SCALE_INV_SHIFT 19
+#define PPM_SCALE_INV ((1LL << (PPM_SCALE_INV_SHIFT + NTP_SCALE_SHIFT)) / \
+		       PPM_SCALE + 1)
+
+#define MAXPHASE 500000000L	/* max phase error (ns) */
+#define MAXFREQ 500000		/* max frequency error (ns/s) */
+#define MAXFREQ_SCALED ((s64)MAXFREQ << NTP_SCALE_SHIFT)
+#define MINSEC 256		/* min interval between updates (s) */
+#define MAXSEC 2048		/* max interval between updates (s) */
+#define NTP_PHASE_LIMIT ((MAXPHASE / NSEC_PER_USEC) << 5) /* beyond max. dispersion */
+
+/*
+ * kernel variables
+ * Note: maximum error = NTP synch distance = dispersion + delay / 2;
+ * estimated error = NTP dispersion.
+ */
+extern unsigned long tick_usec;		/* USER_HZ period (usec) */
+extern unsigned long tick_nsec;		/* ACTHZ          period (nsec) */
+
+extern void ntp_init(void);
+extern void ntp_clear(void);
+
+/* Required to safely shift negative values */
+#define shift_right(x, s) ({	\
+	__typeof__(x) __x = (x);	\
+	__typeof__(s) __s = (s);	\
+	__x < 0 ? -(-__x >> __s) : __x >> __s;	\
+})
+
+#define NTP_SCALE_SHIFT		32
+
+#define NTP_INTERVAL_FREQ  (HZ)
+#define NTP_INTERVAL_LENGTH (NSEC_PER_SEC/NTP_INTERVAL_FREQ)
+
+/* Returns how long ticks are at present, in ns / 2^NTP_SCALE_SHIFT. */
+extern u64 ntp_tick_length(void);
+
+extern int second_overflow(unsigned long secs);
+extern int do_adjtimex(struct timex *);
+extern void hardpps(const struct timespec *, const struct timespec *);
+
+int read_current_timer(unsigned long *timer_val);
+
+/* The clock frequency of the i8253/i8254 PIT */
+#define PIT_TICK_RATE 1193182ul
+
+#endif /* KERNEL */
+
+#endif /* LINUX_TIMEX_H */
diff --git a/include/linux/tiocl.h b/include/linux/tiocl.h
new file mode 100644
index 00000000..4756862c
--- /dev/null
+++ b/include/linux/tiocl.h
@@ -0,0 +1,39 @@
+#ifndef _LINUX_TIOCL_H
+#define _LINUX_TIOCL_H
+
+#define TIOCL_SETSEL	2	/* set a selection */
+#define 	TIOCL_SELCHAR	0	/* select characters */
+#define 	TIOCL_SELWORD	1	/* select whole words */
+#define 	TIOCL_SELLINE	2	/* select whole lines */
+#define 	TIOCL_SELPOINTER	3	/* show the pointer */
+#define 	TIOCL_SELCLEAR	4	/* clear visibility of selection */
+#define 	TIOCL_SELMOUSEREPORT	16	/* report beginning of selection */
+#define 	TIOCL_SELBUTTONMASK	15	/* button mask for report */
+/* selection extent */
+struct tiocl_selection {
+	unsigned short xs;	/* X start */
+	unsigned short ys;	/* Y start */
+	unsigned short xe;	/* X end */
+	unsigned short ye;	/* Y end */
+	unsigned short sel_mode;	/* selection mode */
+};
+
+#define TIOCL_PASTESEL	3	/* paste previous selection */
+#define TIOCL_UNBLANKSCREEN	4	/* unblank screen */
+
+#define TIOCL_SELLOADLUT	5
+	/* set characters to be considered alphabetic when selecting */
+	/* u32[8] bit array, 4 bytes-aligned with type */
+
+/* these two don't return a value: they write it back in the type */
+#define TIOCL_GETSHIFTSTATE	6	/* write shift state */
+#define TIOCL_GETMOUSEREPORTING	7	/* write whether mouse event are reported */
+#define TIOCL_SETVESABLANK	10	/* set vesa blanking mode */
+#define TIOCL_SETKMSGREDIRECT	11	/* restrict kernel messages to a vt */
+#define TIOCL_GETFGCONSOLE	12	/* get foreground vt */
+#define TIOCL_SCROLLCONSOLE	13	/* scroll console */
+#define TIOCL_BLANKSCREEN	14	/* keep screen blank even if a key is pressed */
+#define TIOCL_BLANKEDSCREEN	15	/* return which vt was blanked */
+#define TIOCL_GETKMSGREDIRECT	17	/* get the vt the kernel messages are restricted to */
+
+#endif /* _LINUX_TIOCL_H */
diff --git a/include/linux/tipc.h b/include/linux/tipc.h
new file mode 100644
index 00000000..f2d90091
--- /dev/null
+++ b/include/linux/tipc.h
@@ -0,0 +1,209 @@
+/*
+ * include/linux/tipc.h: Include file for TIPC socket interface
+ *
+ * Copyright (c) 2003-2006, Ericsson AB
+ * Copyright (c) 2005, 2010-2011, Wind River Systems
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ *    contributors may be used to endorse or promote products derived from
+ *    this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _LINUX_TIPC_H_
+#define _LINUX_TIPC_H_
+
+#include <linux/types.h>
+
+/*
+ * TIPC addressing primitives
+ */
+
+struct tipc_portid {
+	__u32 ref;
+	__u32 node;
+};
+
+struct tipc_name {
+	__u32 type;
+	__u32 instance;
+};
+
+struct tipc_name_seq {
+	__u32 type;
+	__u32 lower;
+	__u32 upper;
+};
+
+static inline __u32 tipc_addr(unsigned int zone,
+			      unsigned int cluster,
+			      unsigned int node)
+{
+	return (zone << 24) | (cluster << 12) | node;
+}
+
+static inline unsigned int tipc_zone(__u32 addr)
+{
+	return addr >> 24;
+}
+
+static inline unsigned int tipc_cluster(__u32 addr)
+{
+	return (addr >> 12) & 0xfff;
+}
+
+static inline unsigned int tipc_node(__u32 addr)
+{
+	return addr & 0xfff;
+}
+
+/*
+ * Application-accessible port name types
+ */
+
+#define TIPC_CFG_SRV		0	/* configuration service name type */
+#define TIPC_TOP_SRV		1	/* topology service name type */
+#define TIPC_RESERVED_TYPES	64	/* lowest user-publishable name type */
+
+/*
+ * Publication scopes when binding port names and port name sequences
+ */
+
+#define TIPC_ZONE_SCOPE		1
+#define TIPC_CLUSTER_SCOPE	2
+#define TIPC_NODE_SCOPE		3
+
+/*
+ * Limiting values for messages
+ */
+
+#define TIPC_MAX_USER_MSG_SIZE	66000U
+
+/*
+ * Message importance levels
+ */
+
+#define TIPC_LOW_IMPORTANCE		0
+#define TIPC_MEDIUM_IMPORTANCE		1
+#define TIPC_HIGH_IMPORTANCE		2
+#define TIPC_CRITICAL_IMPORTANCE	3
+
+/*
+ * Msg rejection/connection shutdown reasons
+ */
+
+#define TIPC_OK			0
+#define TIPC_ERR_NO_NAME	1
+#define TIPC_ERR_NO_PORT	2
+#define TIPC_ERR_NO_NODE	3
+#define TIPC_ERR_OVERLOAD	4
+#define TIPC_CONN_SHUTDOWN	5
+
+/*
+ * TIPC topology subscription service definitions
+ */
+
+#define TIPC_SUB_PORTS		0x01	/* filter for port availability */
+#define TIPC_SUB_SERVICE	0x02	/* filter for service availability */
+#define TIPC_SUB_CANCEL		0x04	/* cancel a subscription */
+
+#define TIPC_WAIT_FOREVER	(~0)	/* timeout for permanent subscription */
+
+struct tipc_subscr {
+	struct tipc_name_seq seq;	/* name sequence of interest */
+	__u32 timeout;			/* subscription duration (in ms) */
+	__u32 filter;			/* bitmask of filter options */
+	char usr_handle[8];		/* available for subscriber use */
+};
+
+#define TIPC_PUBLISHED		1	/* publication event */
+#define TIPC_WITHDRAWN		2	/* withdraw event */
+#define TIPC_SUBSCR_TIMEOUT	3	/* subscription timeout event */
+
+struct tipc_event {
+	__u32 event;			/* event type */
+	__u32 found_lower;		/* matching name seq instances */
+	__u32 found_upper;		/*    "      "    "     "      */
+	struct tipc_portid port;	/* associated port */
+	struct tipc_subscr s;		/* associated subscription */
+};
+
+/*
+ * Socket API
+ */
+
+#ifndef AF_TIPC
+#define AF_TIPC		30
+#endif
+
+#ifndef PF_TIPC
+#define PF_TIPC		AF_TIPC
+#endif
+
+#ifndef SOL_TIPC
+#define SOL_TIPC	271
+#endif
+
+#define TIPC_ADDR_NAMESEQ	1
+#define TIPC_ADDR_MCAST		1
+#define TIPC_ADDR_NAME		2
+#define TIPC_ADDR_ID		3
+
+struct sockaddr_tipc {
+	unsigned short family;
+	unsigned char  addrtype;
+	signed   char  scope;
+	union {
+		struct tipc_portid id;
+		struct tipc_name_seq nameseq;
+		struct {
+			struct tipc_name name;
+			__u32 domain;
+		} name;
+	} addr;
+};
+
+/*
+ * Ancillary data objects supported by recvmsg()
+ */
+
+#define TIPC_ERRINFO	1	/* error info */
+#define TIPC_RETDATA	2	/* returned data */
+#define TIPC_DESTNAME	3	/* destination name */
+
+/*
+ * TIPC-specific socket option values
+ */
+
+#define TIPC_IMPORTANCE		127	/* Default: TIPC_LOW_IMPORTANCE */
+#define TIPC_SRC_DROPPABLE	128	/* Default: based on socket type */
+#define TIPC_DEST_DROPPABLE	129	/* Default: based on socket type */
+#define TIPC_CONN_TIMEOUT	130	/* Default: 8000 (ms)  */
+#define TIPC_NODE_RECVQ_DEPTH	131	/* Default: none (read only) */
+#define TIPC_SOCK_RECVQ_DEPTH	132	/* Default: none (read only) */
+
+#endif
diff --git a/include/linux/tipc_config.h b/include/linux/tipc_config.h
new file mode 100644
index 00000000..9730b0e5
--- /dev/null
+++ b/include/linux/tipc_config.h
@@ -0,0 +1,395 @@
+/*
+ * include/linux/tipc_config.h: Include file for TIPC configuration interface
+ *
+ * Copyright (c) 2003-2006, Ericsson AB
+ * Copyright (c) 2005-2007, 2010-2011, Wind River Systems
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ *    contributors may be used to endorse or promote products derived from
+ *    this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _LINUX_TIPC_CONFIG_H_
+#define _LINUX_TIPC_CONFIG_H_
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <asm/byteorder.h>
+
+#ifndef __KERNEL__
+#include <arpa/inet.h> /* for ntohs etc. */
+#endif
+
+/*
+ * Configuration
+ *
+ * All configuration management messaging involves sending a request message
+ * to the TIPC configuration service on a node, which sends a reply message
+ * back.  (In the future multi-message replies may be supported.)
+ *
+ * Both request and reply messages consist of a transport header and payload.
+ * The transport header contains info about the desired operation;
+ * the payload consists of zero or more type/length/value (TLV) items
+ * which specify parameters or results for the operation.
+ *
+ * For many operations, the request and reply messages have a fixed number
+ * of TLVs (usually zero or one); however, some reply messages may return
+ * a variable number of TLVs.  A failed request is denoted by the presence
+ * of an "error string" TLV in the reply message instead of the TLV(s) the
+ * reply should contain if the request succeeds.
+ */
+
+/*
+ * Public commands:
+ * May be issued by any process.
+ * Accepted by own node, or by remote node only if remote management enabled.
+ */
+
+#define  TIPC_CMD_NOOP              0x0000    /* tx none, rx none */
+#define  TIPC_CMD_GET_NODES         0x0001    /* tx net_addr, rx node_info(s) */
+#define  TIPC_CMD_GET_MEDIA_NAMES   0x0002    /* tx none, rx media_name(s) */
+#define  TIPC_CMD_GET_BEARER_NAMES  0x0003    /* tx none, rx bearer_name(s) */
+#define  TIPC_CMD_GET_LINKS         0x0004    /* tx net_addr, rx link_info(s) */
+#define  TIPC_CMD_SHOW_NAME_TABLE   0x0005    /* tx name_tbl_query, rx ultra_string */
+#define  TIPC_CMD_SHOW_PORTS        0x0006    /* tx none, rx ultra_string */
+#define  TIPC_CMD_SHOW_LINK_STATS   0x000B    /* tx link_name, rx ultra_string */
+#define  TIPC_CMD_SHOW_STATS        0x000F    /* tx unsigned, rx ultra_string */
+
+/*
+ * Protected commands:
+ * May only be issued by "network administration capable" process.
+ * Accepted by own node, or by remote node only if remote management enabled
+ * and this node is zone manager.
+ */
+
+#define  TIPC_CMD_GET_REMOTE_MNG    0x4003    /* tx none, rx unsigned */
+#define  TIPC_CMD_GET_MAX_PORTS     0x4004    /* tx none, rx unsigned */
+#define  TIPC_CMD_GET_MAX_PUBL      0x4005    /* tx none, rx unsigned */
+#define  TIPC_CMD_GET_MAX_SUBSCR    0x4006    /* tx none, rx unsigned */
+#define  TIPC_CMD_GET_MAX_ZONES     0x4007    /* obsoleted */
+#define  TIPC_CMD_GET_MAX_CLUSTERS  0x4008    /* obsoleted */
+#define  TIPC_CMD_GET_MAX_NODES     0x4009    /* obsoleted */
+#define  TIPC_CMD_GET_MAX_SLAVES    0x400A    /* obsoleted */
+#define  TIPC_CMD_GET_NETID         0x400B    /* tx none, rx unsigned */
+
+#define  TIPC_CMD_ENABLE_BEARER     0x4101    /* tx bearer_config, rx none */
+#define  TIPC_CMD_DISABLE_BEARER    0x4102    /* tx bearer_name, rx none */
+#define  TIPC_CMD_SET_LINK_TOL      0x4107    /* tx link_config, rx none */
+#define  TIPC_CMD_SET_LINK_PRI      0x4108    /* tx link_config, rx none */
+#define  TIPC_CMD_SET_LINK_WINDOW   0x4109    /* tx link_config, rx none */
+#define  TIPC_CMD_SET_LOG_SIZE      0x410A    /* tx unsigned, rx none */
+#define  TIPC_CMD_DUMP_LOG          0x410B    /* tx none, rx ultra_string */
+#define  TIPC_CMD_RESET_LINK_STATS  0x410C    /* tx link_name, rx none */
+
+/*
+ * Private commands:
+ * May only be issued by "network administration capable" process.
+ * Accepted by own node only; cannot be used on a remote node.
+ */
+
+#define  TIPC_CMD_SET_NODE_ADDR     0x8001    /* tx net_addr, rx none */
+#define  TIPC_CMD_SET_REMOTE_MNG    0x8003    /* tx unsigned, rx none */
+#define  TIPC_CMD_SET_MAX_PORTS     0x8004    /* tx unsigned, rx none */
+#define  TIPC_CMD_SET_MAX_PUBL      0x8005    /* tx unsigned, rx none */
+#define  TIPC_CMD_SET_MAX_SUBSCR    0x8006    /* tx unsigned, rx none */
+#define  TIPC_CMD_SET_MAX_ZONES     0x8007    /* obsoleted */
+#define  TIPC_CMD_SET_MAX_CLUSTERS  0x8008    /* obsoleted */
+#define  TIPC_CMD_SET_MAX_NODES     0x8009    /* obsoleted */
+#define  TIPC_CMD_SET_MAX_SLAVES    0x800A    /* obsoleted */
+#define  TIPC_CMD_SET_NETID         0x800B    /* tx unsigned, rx none */
+
+/*
+ * Reserved commands:
+ * May not be issued by any process.
+ * Used internally by TIPC.
+ */
+
+#define  TIPC_CMD_NOT_NET_ADMIN     0xC001    /* tx none, rx none */
+
+/*
+ * TLV types defined for TIPC
+ */
+
+#define TIPC_TLV_NONE		0	/* no TLV present */
+#define TIPC_TLV_VOID		1	/* empty TLV (0 data bytes)*/
+#define TIPC_TLV_UNSIGNED	2	/* 32-bit integer */
+#define TIPC_TLV_STRING		3	/* char[128] (max) */
+#define TIPC_TLV_LARGE_STRING	4	/* char[2048] (max) */
+#define TIPC_TLV_ULTRA_STRING	5	/* char[32768] (max) */
+
+#define TIPC_TLV_ERROR_STRING	16	/* char[128] containing "error code" */
+#define TIPC_TLV_NET_ADDR	17	/* 32-bit integer denoting <Z.C.N> */
+#define TIPC_TLV_MEDIA_NAME	18	/* char[TIPC_MAX_MEDIA_NAME] */
+#define TIPC_TLV_BEARER_NAME	19	/* char[TIPC_MAX_BEARER_NAME] */
+#define TIPC_TLV_LINK_NAME	20	/* char[TIPC_MAX_LINK_NAME] */
+#define TIPC_TLV_NODE_INFO	21	/* struct tipc_node_info */
+#define TIPC_TLV_LINK_INFO	22	/* struct tipc_link_info */
+#define TIPC_TLV_BEARER_CONFIG	23	/* struct tipc_bearer_config */
+#define TIPC_TLV_LINK_CONFIG	24	/* struct tipc_link_config */
+#define TIPC_TLV_NAME_TBL_QUERY	25	/* struct tipc_name_table_query */
+#define TIPC_TLV_PORT_REF	26	/* 32-bit port reference */
+
+/*
+ * Maximum sizes of TIPC bearer-related names (including terminating NUL)
+ */
+
+#define TIPC_MAX_MEDIA_NAME	16	/* format = media */
+#define TIPC_MAX_IF_NAME	16	/* format = interface */
+#define TIPC_MAX_BEARER_NAME	32	/* format = media:interface */
+#define TIPC_MAX_LINK_NAME	60	/* format = Z.C.N:interface-Z.C.N:interface */
+
+/*
+ * Link priority limits (min, default, max, media default)
+ */
+
+#define TIPC_MIN_LINK_PRI	0
+#define TIPC_DEF_LINK_PRI	10
+#define TIPC_MAX_LINK_PRI	31
+#define TIPC_MEDIA_LINK_PRI	(TIPC_MAX_LINK_PRI + 1)
+
+/*
+ * Link tolerance limits (min, default, max), in ms
+ */
+
+#define TIPC_MIN_LINK_TOL 50
+#define TIPC_DEF_LINK_TOL 1500
+#define TIPC_MAX_LINK_TOL 30000
+
+#if (TIPC_MIN_LINK_TOL < 16)
+#error "TIPC_MIN_LINK_TOL is too small (abort limit may be NaN)"
+#endif
+
+/*
+ * Link window limits (min, default, max), in packets
+ */
+
+#define TIPC_MIN_LINK_WIN 16
+#define TIPC_DEF_LINK_WIN 50
+#define TIPC_MAX_LINK_WIN 150
+
+
+struct tipc_node_info {
+	__be32 addr;			/* network address of node */
+	__be32 up;			/* 0=down, 1= up */
+};
+
+struct tipc_link_info {
+	__be32 dest;			/* network address of peer node */
+	__be32 up;			/* 0=down, 1=up */
+	char str[TIPC_MAX_LINK_NAME];	/* link name */
+};
+
+struct tipc_bearer_config {
+	__be32 priority;		/* Range [1,31]. Override per link  */
+	__be32 disc_domain;		/* <Z.C.N> describing desired nodes */
+	char name[TIPC_MAX_BEARER_NAME];
+};
+
+struct tipc_link_config {
+	__be32 value;
+	char name[TIPC_MAX_LINK_NAME];
+};
+
+#define TIPC_NTQ_ALLTYPES 0x80000000
+
+struct tipc_name_table_query {
+	__be32 depth;	/* 1:type, 2:+name info, 3:+port info, 4+:+debug info */
+	__be32 type;	/* {t,l,u} info ignored if high bit of "depth" is set */
+	__be32 lowbound; /* (i.e. displays all entries of name table) */
+	__be32 upbound;
+};
+
+/*
+ * The error string TLV is a null-terminated string describing the cause
+ * of the request failure.  To simplify error processing (and to save space)
+ * the first character of the string can be a special error code character
+ * (lying by the range 0x80 to 0xFF) which represents a pre-defined reason.
+ */
+
+#define TIPC_CFG_TLV_ERROR      "\x80"  /* request contains incorrect TLV(s) */
+#define TIPC_CFG_NOT_NET_ADMIN  "\x81"	/* must be network administrator */
+#define TIPC_CFG_NOT_ZONE_MSTR	"\x82"	/* must be zone master */
+#define TIPC_CFG_NO_REMOTE	"\x83"	/* remote management not enabled */
+#define TIPC_CFG_NOT_SUPPORTED  "\x84"	/* request is not supported by TIPC */
+#define TIPC_CFG_INVALID_VALUE  "\x85"  /* request has invalid argument value */
+
+/*
+ * A TLV consists of a descriptor, followed by the TLV value.
+ * TLV descriptor fields are stored in network byte order;
+ * TLV values must also be stored in network byte order (where applicable).
+ * TLV descriptors must be aligned to addresses which are multiple of 4,
+ * so up to 3 bytes of padding may exist at the end of the TLV value area.
+ * There must not be any padding between the TLV descriptor and its value.
+ */
+
+struct tlv_desc {
+	__be16 tlv_len;		/* TLV length (descriptor + value) */
+	__be16 tlv_type;		/* TLV identifier */
+};
+
+#define TLV_ALIGNTO 4
+
+#define TLV_ALIGN(datalen) (((datalen)+(TLV_ALIGNTO-1)) & ~(TLV_ALIGNTO-1))
+#define TLV_LENGTH(datalen) (sizeof(struct tlv_desc) + (datalen))
+#define TLV_SPACE(datalen) (TLV_ALIGN(TLV_LENGTH(datalen)))
+#define TLV_DATA(tlv) ((void *)((char *)(tlv) + TLV_LENGTH(0)))
+
+static inline int TLV_OK(const void *tlv, __u16 space)
+{
+	/*
+	 * Would also like to check that "tlv" is a multiple of 4,
+	 * but don't know how to do this in a portable way.
+	 * - Tried doing (!(tlv & (TLV_ALIGNTO-1))), but GCC compiler
+	 *   won't allow binary "&" with a pointer.
+	 * - Tried casting "tlv" to integer type, but causes warning about size
+	 *   mismatch when pointer is bigger than chosen type (int, long, ...).
+	 */
+
+	return (space >= TLV_SPACE(0)) &&
+		(ntohs(((struct tlv_desc *)tlv)->tlv_len) <= space);
+}
+
+static inline int TLV_CHECK(const void *tlv, __u16 space, __u16 exp_type)
+{
+	return TLV_OK(tlv, space) &&
+		(ntohs(((struct tlv_desc *)tlv)->tlv_type) == exp_type);
+}
+
+static inline int TLV_SET(void *tlv, __u16 type, void *data, __u16 len)
+{
+	struct tlv_desc *tlv_ptr;
+	int tlv_len;
+
+	tlv_len = TLV_LENGTH(len);
+	tlv_ptr = (struct tlv_desc *)tlv;
+	tlv_ptr->tlv_type = htons(type);
+	tlv_ptr->tlv_len  = htons(tlv_len);
+	if (len && data)
+		memcpy(TLV_DATA(tlv_ptr), data, tlv_len);
+	return TLV_SPACE(len);
+}
+
+/*
+ * A TLV list descriptor simplifies processing of messages
+ * containing multiple TLVs.
+ */
+
+struct tlv_list_desc {
+	struct tlv_desc *tlv_ptr;	/* ptr to current TLV */
+	__u32 tlv_space;		/* # bytes from curr TLV to list end */
+};
+
+static inline void TLV_LIST_INIT(struct tlv_list_desc *list,
+				 void *data, __u32 space)
+{
+	list->tlv_ptr = (struct tlv_desc *)data;
+	list->tlv_space = space;
+}
+
+static inline int TLV_LIST_EMPTY(struct tlv_list_desc *list)
+{
+	return (list->tlv_space == 0);
+}
+
+static inline int TLV_LIST_CHECK(struct tlv_list_desc *list, __u16 exp_type)
+{
+	return TLV_CHECK(list->tlv_ptr, list->tlv_space, exp_type);
+}
+
+static inline void *TLV_LIST_DATA(struct tlv_list_desc *list)
+{
+	return TLV_DATA(list->tlv_ptr);
+}
+
+static inline void TLV_LIST_STEP(struct tlv_list_desc *list)
+{
+	__u16 tlv_space = TLV_ALIGN(ntohs(list->tlv_ptr->tlv_len));
+
+	list->tlv_ptr = (struct tlv_desc *)((char *)list->tlv_ptr + tlv_space);
+	list->tlv_space -= tlv_space;
+}
+
+/*
+ * Configuration messages exchanged via NETLINK_GENERIC use the following
+ * family id, name, version and command.
+ */
+#define TIPC_GENL_NAME		"TIPC"
+#define TIPC_GENL_VERSION	0x1
+#define TIPC_GENL_CMD		0x1
+
+/*
+ * TIPC specific header used in NETLINK_GENERIC requests.
+ */
+struct tipc_genlmsghdr {
+	__u32 dest;		/* Destination address */
+	__u16 cmd;		/* Command */
+	__u16 reserved;		/* Unused */
+};
+
+#define TIPC_GENL_HDRLEN	NLMSG_ALIGN(sizeof(struct tipc_genlmsghdr))
+
+/*
+ * Configuration messages exchanged via TIPC sockets use the TIPC configuration
+ * message header, which is defined below.  This structure is analogous
+ * to the Netlink message header, but fields are stored in network byte order
+ * and no padding is permitted between the header and the message data
+ * that follows.
+ */
+
+struct tipc_cfg_msg_hdr {
+	__be32 tcm_len;		/* Message length (including header) */
+	__be16 tcm_type;	/* Command type */
+	__be16 tcm_flags;	/* Additional flags */
+	char  tcm_reserved[8];	/* Unused */
+};
+
+#define TCM_F_REQUEST	0x1	/* Flag: Request message */
+#define TCM_F_MORE	0x2	/* Flag: Message to be continued */
+
+#define TCM_ALIGN(datalen)  (((datalen)+3) & ~3)
+#define TCM_LENGTH(datalen) (sizeof(struct tipc_cfg_msg_hdr) + datalen)
+#define TCM_SPACE(datalen)  (TCM_ALIGN(TCM_LENGTH(datalen)))
+#define TCM_DATA(tcm_hdr)   ((void *)((char *)(tcm_hdr) + TCM_LENGTH(0)))
+
+static inline int TCM_SET(void *msg, __u16 cmd, __u16 flags,
+			  void *data, __u16 data_len)
+{
+	struct tipc_cfg_msg_hdr *tcm_hdr;
+	int msg_len;
+
+	msg_len = TCM_LENGTH(data_len);
+	tcm_hdr = (struct tipc_cfg_msg_hdr *)msg;
+	tcm_hdr->tcm_len   = htonl(msg_len);
+	tcm_hdr->tcm_type  = htons(cmd);
+	tcm_hdr->tcm_flags = htons(flags);
+	if (data_len && data)
+		memcpy(TCM_DATA(msg), data, data_len);
+	return TCM_SPACE(data_len);
+}
+
+#endif
diff --git a/include/linux/topology.h b/include/linux/topology.h
new file mode 100644
index 00000000..e26db031
--- /dev/null
+++ b/include/linux/topology.h
@@ -0,0 +1,335 @@
+/*
+ * include/linux/topology.h
+ *
+ * Written by: Matthew Dobson, IBM Corporation
+ *
+ * Copyright (C) 2002, IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <colpatch@us.ibm.com>
+ */
+#ifndef _LINUX_TOPOLOGY_H
+#define _LINUX_TOPOLOGY_H
+
+#include <linux/cpumask.h>
+#include <linux/bitops.h>
+#include <linux/mmzone.h>
+#include <linux/smp.h>
+#include <linux/percpu.h>
+#include <asm/topology.h>
+
+#ifndef node_has_online_mem
+#define node_has_online_mem(nid) (1)
+#endif
+
+#ifndef nr_cpus_node
+#define nr_cpus_node(node) cpumask_weight(cpumask_of_node(node))
+#endif
+
+#define for_each_node_with_cpus(node)			\
+	for_each_online_node(node)			\
+		if (nr_cpus_node(node))
+
+int arch_update_cpu_topology(void);
+
+/* Conform to ACPI 2.0 SLIT distance definitions */
+#define LOCAL_DISTANCE		10
+#define REMOTE_DISTANCE		20
+#ifndef node_distance
+#define node_distance(from,to)	((from) == (to) ? LOCAL_DISTANCE : REMOTE_DISTANCE)
+#endif
+#ifndef RECLAIM_DISTANCE
+/*
+ * If the distance between nodes in a system is larger than RECLAIM_DISTANCE
+ * (in whatever arch specific measurement units returned by node_distance())
+ * then switch on zone reclaim on boot.
+ */
+#define RECLAIM_DISTANCE 30
+#endif
+#ifndef PENALTY_FOR_NODE_WITH_CPUS
+#define PENALTY_FOR_NODE_WITH_CPUS	(1)
+#endif
+
+/*
+ * Below are the 3 major initializers used in building sched_domains:
+ * SD_SIBLING_INIT, for SMT domains
+ * SD_CPU_INIT, for SMP domains
+ * SD_NODE_INIT, for NUMA domains
+ *
+ * Any architecture that cares to do any tuning to these values should do so
+ * by defining their own arch-specific initializer in include/asm/topology.h.
+ * A definition there will automagically override these default initializers
+ * and allow arch-specific performance tuning of sched_domains.
+ * (Only non-zero and non-null fields need be specified.)
+ */
+
+#ifdef CONFIG_SCHED_SMT
+/* MCD - Do we really need this?  It is always on if CONFIG_SCHED_SMT is,
+ * so can't we drop this in favor of CONFIG_SCHED_SMT?
+ */
+#define ARCH_HAS_SCHED_WAKE_IDLE
+/* Common values for SMT siblings */
+#ifndef SD_SIBLING_INIT
+#define SD_SIBLING_INIT (struct sched_domain) {				\
+	.min_interval		= 1,					\
+	.max_interval		= 2,					\
+	.busy_factor		= 64,					\
+	.imbalance_pct		= 110,					\
+									\
+	.flags			= 1*SD_LOAD_BALANCE			\
+				| 1*SD_BALANCE_NEWIDLE			\
+				| 1*SD_BALANCE_EXEC			\
+				| 1*SD_BALANCE_FORK			\
+				| 0*SD_BALANCE_WAKE			\
+				| 1*SD_WAKE_AFFINE			\
+				| 1*SD_SHARE_CPUPOWER			\
+				| 0*SD_POWERSAVINGS_BALANCE		\
+				| 1*SD_SHARE_PKG_RESOURCES		\
+				| 0*SD_SERIALIZE			\
+				| 0*SD_PREFER_SIBLING			\
+				| arch_sd_sibling_asym_packing()	\
+				,					\
+	.last_balance		= jiffies,				\
+	.balance_interval	= 1,					\
+	.smt_gain		= 1178,	/* 15% */			\
+}
+#endif
+#endif /* CONFIG_SCHED_SMT */
+
+#ifdef CONFIG_SCHED_MC
+/* Common values for MC siblings. for now mostly derived from SD_CPU_INIT */
+#ifndef SD_MC_INIT
+#define SD_MC_INIT (struct sched_domain) {				\
+	.min_interval		= 1,					\
+	.max_interval		= 4,					\
+	.busy_factor		= 64,					\
+	.imbalance_pct		= 125,					\
+	.cache_nice_tries	= 1,					\
+	.busy_idx		= 2,					\
+	.wake_idx		= 0,					\
+	.forkexec_idx		= 0,					\
+									\
+	.flags			= 1*SD_LOAD_BALANCE			\
+				| 1*SD_BALANCE_NEWIDLE			\
+				| 1*SD_BALANCE_EXEC			\
+				| 1*SD_BALANCE_FORK			\
+				| 0*SD_BALANCE_WAKE			\
+				| 1*SD_WAKE_AFFINE			\
+				| 0*SD_PREFER_LOCAL			\
+				| 0*SD_SHARE_CPUPOWER			\
+				| 1*SD_SHARE_PKG_RESOURCES		\
+				| 0*SD_SERIALIZE			\
+				| sd_balance_for_mc_power()		\
+				| sd_power_saving_flags()		\
+				,					\
+	.last_balance		= jiffies,				\
+	.balance_interval	= 1,					\
+}
+#endif
+#endif /* CONFIG_SCHED_MC */
+
+/* Common values for CPUs */
+#ifndef SD_CPU_INIT
+#define SD_CPU_INIT (struct sched_domain) {				\
+	.min_interval		= 1,					\
+	.max_interval		= 4,					\
+	.busy_factor		= 64,					\
+	.imbalance_pct		= 125,					\
+	.cache_nice_tries	= 1,					\
+	.busy_idx		= 2,					\
+	.idle_idx		= 1,					\
+	.newidle_idx		= 0,					\
+	.wake_idx		= 0,					\
+	.forkexec_idx		= 0,					\
+									\
+	.flags			= 1*SD_LOAD_BALANCE			\
+				| 1*SD_BALANCE_NEWIDLE			\
+				| 1*SD_BALANCE_EXEC			\
+				| 1*SD_BALANCE_FORK			\
+				| 0*SD_BALANCE_WAKE			\
+				| 1*SD_WAKE_AFFINE			\
+				| 0*SD_PREFER_LOCAL			\
+				| 0*SD_SHARE_CPUPOWER			\
+				| 0*SD_SHARE_PKG_RESOURCES		\
+				| 0*SD_SERIALIZE			\
+				| sd_balance_for_package_power()	\
+				| sd_power_saving_flags()		\
+				,					\
+	.last_balance		= jiffies,				\
+	.balance_interval	= 1,					\
+}
+#endif
+
+/* sched_domains SD_ALLNODES_INIT for NUMA machines */
+#define SD_ALLNODES_INIT (struct sched_domain) {			\
+	.min_interval		= 64,					\
+	.max_interval		= 64*num_online_cpus(),			\
+	.busy_factor		= 128,					\
+	.imbalance_pct		= 133,					\
+	.cache_nice_tries	= 1,					\
+	.busy_idx		= 3,					\
+	.idle_idx		= 3,					\
+	.flags			= 1*SD_LOAD_BALANCE			\
+				| 1*SD_BALANCE_NEWIDLE			\
+				| 0*SD_BALANCE_EXEC			\
+				| 0*SD_BALANCE_FORK			\
+				| 0*SD_BALANCE_WAKE			\
+				| 0*SD_WAKE_AFFINE			\
+				| 0*SD_SHARE_CPUPOWER			\
+				| 0*SD_POWERSAVINGS_BALANCE		\
+				| 0*SD_SHARE_PKG_RESOURCES		\
+				| 1*SD_SERIALIZE			\
+				| 0*SD_PREFER_SIBLING			\
+				,					\
+	.last_balance		= jiffies,				\
+	.balance_interval	= 64,					\
+}
+
+#ifndef SD_NODES_PER_DOMAIN
+#define SD_NODES_PER_DOMAIN 16
+#endif
+
+#ifdef CONFIG_SCHED_BOOK
+#ifndef SD_BOOK_INIT
+#error Please define an appropriate SD_BOOK_INIT in include/asm/topology.h!!!
+#endif
+#endif /* CONFIG_SCHED_BOOK */
+
+#ifdef CONFIG_NUMA
+#ifndef SD_NODE_INIT
+#error Please define an appropriate SD_NODE_INIT in include/asm/topology.h!!!
+#endif
+
+#endif /* CONFIG_NUMA */
+
+#ifdef CONFIG_USE_PERCPU_NUMA_NODE_ID
+DECLARE_PER_CPU(int, numa_node);
+
+#ifndef numa_node_id
+/* Returns the number of the current Node. */
+static inline int numa_node_id(void)
+{
+	return __this_cpu_read(numa_node);
+}
+#endif
+
+#ifndef cpu_to_node
+static inline int cpu_to_node(int cpu)
+{
+	return per_cpu(numa_node, cpu);
+}
+#endif
+
+#ifndef set_numa_node
+static inline void set_numa_node(int node)
+{
+	percpu_write(numa_node, node);
+}
+#endif
+
+#ifndef set_cpu_numa_node
+static inline void set_cpu_numa_node(int cpu, int node)
+{
+	per_cpu(numa_node, cpu) = node;
+}
+#endif
+
+#else	/* !CONFIG_USE_PERCPU_NUMA_NODE_ID */
+
+/* Returns the number of the current Node. */
+#ifndef numa_node_id
+static inline int numa_node_id(void)
+{
+	return cpu_to_node(raw_smp_processor_id());
+}
+#endif
+
+#endif	/* [!]CONFIG_USE_PERCPU_NUMA_NODE_ID */
+
+#ifdef CONFIG_HAVE_MEMORYLESS_NODES
+
+/*
+ * N.B., Do NOT reference the '_numa_mem_' per cpu variable directly.
+ * It will not be defined when CONFIG_HAVE_MEMORYLESS_NODES is not defined.
+ * Use the accessor functions set_numa_mem(), numa_mem_id() and cpu_to_mem().
+ */
+DECLARE_PER_CPU(int, _numa_mem_);
+
+#ifndef set_numa_mem
+static inline void set_numa_mem(int node)
+{
+	percpu_write(_numa_mem_, node);
+}
+#endif
+
+#ifndef numa_mem_id
+/* Returns the number of the nearest Node with memory */
+static inline int numa_mem_id(void)
+{
+	return __this_cpu_read(_numa_mem_);
+}
+#endif
+
+#ifndef cpu_to_mem
+static inline int cpu_to_mem(int cpu)
+{
+	return per_cpu(_numa_mem_, cpu);
+}
+#endif
+
+#ifndef set_cpu_numa_mem
+static inline void set_cpu_numa_mem(int cpu, int node)
+{
+	per_cpu(_numa_mem_, cpu) = node;
+}
+#endif
+
+#else	/* !CONFIG_HAVE_MEMORYLESS_NODES */
+
+#ifndef numa_mem_id
+/* Returns the number of the nearest Node with memory */
+static inline int numa_mem_id(void)
+{
+	return numa_node_id();
+}
+#endif
+
+#ifndef cpu_to_mem
+static inline int cpu_to_mem(int cpu)
+{
+	return cpu_to_node(cpu);
+}
+#endif
+
+#endif	/* [!]CONFIG_HAVE_MEMORYLESS_NODES */
+
+#ifndef topology_physical_package_id
+#define topology_physical_package_id(cpu)	((void)(cpu), -1)
+#endif
+#ifndef topology_core_id
+#define topology_core_id(cpu)			((void)(cpu), 0)
+#endif
+#ifndef topology_thread_cpumask
+#define topology_thread_cpumask(cpu)		cpumask_of(cpu)
+#endif
+#ifndef topology_core_cpumask
+#define topology_core_cpumask(cpu)		cpumask_of(cpu)
+#endif
+
+#endif /* _LINUX_TOPOLOGY_H */
diff --git a/include/linux/toshiba.h b/include/linux/toshiba.h
new file mode 100644
index 00000000..772dedbc
--- /dev/null
+++ b/include/linux/toshiba.h
@@ -0,0 +1,40 @@
+/* toshiba.h -- Linux driver for accessing the SMM on Toshiba laptops 
+ *
+ * Copyright (c) 1996-2000  Jonathan A. Buzzard (jonathan@buzzard.org.uk)
+ *
+ * Thanks to Juergen Heinzl <juergen@monocerus.demon.co.uk> for the pointers
+ * on making sure the structure is aligned and packed.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#ifndef _LINUX_TOSHIBA_H
+#define _LINUX_TOSHIBA_H
+
+#define TOSH_PROC "/proc/toshiba"
+#define TOSH_DEVICE "/dev/toshiba"
+#define TOSH_SMM _IOWR('t', 0x90, int)	/* broken: meant 24 bytes */
+
+typedef struct {
+	unsigned int eax;
+	unsigned int ebx __attribute__ ((packed));
+	unsigned int ecx __attribute__ ((packed));
+	unsigned int edx __attribute__ ((packed));
+	unsigned int esi __attribute__ ((packed));
+	unsigned int edi __attribute__ ((packed));
+} SMMRegisters;
+
+#ifdef __KERNEL__
+int tosh_smm(SMMRegisters *regs);
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/linux/tpm.h b/include/linux/tpm.h
new file mode 100644
index 00000000..fdc718ab
--- /dev/null
+++ b/include/linux/tpm.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2004,2007,2008 IBM Corporation
+ *
+ * Authors:
+ * Leendert van Doorn <leendert@watson.ibm.com>
+ * Dave Safford <safford@watson.ibm.com>
+ * Reiner Sailer <sailer@watson.ibm.com>
+ * Kylene Hall <kjhall@us.ibm.com>
+ * Debora Velarde <dvelarde@us.ibm.com>
+ *
+ * Maintained by: <tpmdd_devel@lists.sourceforge.net>
+ *
+ * Device driver for TCG/TCPA TPM (trusted platform module).
+ * Specifications at www.trustedcomputinggroup.org
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ *
+ */
+#ifndef __LINUX_TPM_H__
+#define __LINUX_TPM_H__
+
+/*
+ * Chip num is this value or a valid tpm idx
+ */
+#define	TPM_ANY_NUM 0xFFFF
+
+#if defined(CONFIG_TCG_TPM) || defined(CONFIG_TCG_TPM_MODULE)
+
+extern int tpm_pcr_read(u32 chip_num, int pcr_idx, u8 *res_buf);
+extern int tpm_pcr_extend(u32 chip_num, int pcr_idx, const u8 *hash);
+extern int tpm_send(u32 chip_num, void *cmd, size_t buflen);
+#else
+static inline int tpm_pcr_read(u32 chip_num, int pcr_idx, u8 *res_buf) {
+	return -ENODEV;
+}
+static inline int tpm_pcr_extend(u32 chip_num, int pcr_idx, const u8 *hash) {
+	return -ENODEV;
+}
+static inline int tpm_send(u32 chip_num, void *cmd, size_t buflen) {
+	return -ENODEV;
+}
+#endif
+#endif
diff --git a/include/linux/tpm_command.h b/include/linux/tpm_command.h
new file mode 100644
index 00000000..727512e2
--- /dev/null
+++ b/include/linux/tpm_command.h
@@ -0,0 +1,28 @@
+#ifndef __LINUX_TPM_COMMAND_H__
+#define __LINUX_TPM_COMMAND_H__
+
+/*
+ * TPM Command constants from specifications at
+ * http://www.trustedcomputinggroup.org
+ */
+
+/* Command TAGS */
+#define TPM_TAG_RQU_COMMAND             193
+#define TPM_TAG_RQU_AUTH1_COMMAND       194
+#define TPM_TAG_RQU_AUTH2_COMMAND       195
+#define TPM_TAG_RSP_COMMAND             196
+#define TPM_TAG_RSP_AUTH1_COMMAND       197
+#define TPM_TAG_RSP_AUTH2_COMMAND       198
+
+/* Command Ordinals */
+#define TPM_ORD_GETRANDOM               70
+#define TPM_ORD_OSAP                    11
+#define TPM_ORD_OIAP                    10
+#define TPM_ORD_SEAL                    23
+#define TPM_ORD_UNSEAL                  24
+
+/* Other constants */
+#define SRKHANDLE                       0x40000000
+#define TPM_NONCE_SIZE                  20
+
+#endif
diff --git a/include/linux/trace_clock.h b/include/linux/trace_clock.h
new file mode 100644
index 00000000..4eb49023
--- /dev/null
+++ b/include/linux/trace_clock.h
@@ -0,0 +1,20 @@
+#ifndef _LINUX_TRACE_CLOCK_H
+#define _LINUX_TRACE_CLOCK_H
+
+/*
+ * 3 trace clock variants, with differing scalability/precision
+ * tradeoffs:
+ *
+ *  -   local: CPU-local trace clock
+ *  -  medium: scalable global clock with some jitter
+ *  -  global: globally monotonic, serialized clock
+ */
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+extern u64 notrace trace_clock_local(void);
+extern u64 notrace trace_clock(void);
+extern u64 notrace trace_clock_global(void);
+extern u64 notrace trace_clock_counter(void);
+
+#endif /* _LINUX_TRACE_CLOCK_H */
diff --git a/include/linux/trace_seq.h b/include/linux/trace_seq.h
new file mode 100644
index 00000000..a32d86ec
--- /dev/null
+++ b/include/linux/trace_seq.h
@@ -0,0 +1,97 @@
+#ifndef _LINUX_TRACE_SEQ_H
+#define _LINUX_TRACE_SEQ_H
+
+#include <linux/fs.h>
+
+#include <asm/page.h>
+
+/*
+ * Trace sequences are used to allow a function to call several other functions
+ * to create a string of data to use (up to a max of PAGE_SIZE).
+ */
+
+struct trace_seq {
+	unsigned char		buffer[PAGE_SIZE];
+	unsigned int		len;
+	unsigned int		readpos;
+	int			full;
+};
+
+static inline void
+trace_seq_init(struct trace_seq *s)
+{
+	s->len = 0;
+	s->readpos = 0;
+	s->full = 0;
+}
+
+/*
+ * Currently only defined when tracing is enabled.
+ */
+#ifdef CONFIG_TRACING
+extern __printf(2, 3)
+int trace_seq_printf(struct trace_seq *s, const char *fmt, ...);
+extern __printf(2, 0)
+int trace_seq_vprintf(struct trace_seq *s, const char *fmt, va_list args);
+extern int
+trace_seq_bprintf(struct trace_seq *s, const char *fmt, const u32 *binary);
+extern int trace_print_seq(struct seq_file *m, struct trace_seq *s);
+extern ssize_t trace_seq_to_user(struct trace_seq *s, char __user *ubuf,
+				 size_t cnt);
+extern int trace_seq_puts(struct trace_seq *s, const char *str);
+extern int trace_seq_putc(struct trace_seq *s, unsigned char c);
+extern int trace_seq_putmem(struct trace_seq *s, const void *mem, size_t len);
+extern int trace_seq_putmem_hex(struct trace_seq *s, const void *mem,
+				size_t len);
+extern void *trace_seq_reserve(struct trace_seq *s, size_t len);
+extern int trace_seq_path(struct trace_seq *s, const struct path *path);
+
+#else /* CONFIG_TRACING */
+static inline int trace_seq_printf(struct trace_seq *s, const char *fmt, ...)
+{
+	return 0;
+}
+static inline int
+trace_seq_bprintf(struct trace_seq *s, const char *fmt, const u32 *binary)
+{
+	return 0;
+}
+
+static inline int trace_print_seq(struct seq_file *m, struct trace_seq *s)
+{
+	return 0;
+}
+static inline ssize_t trace_seq_to_user(struct trace_seq *s, char __user *ubuf,
+				 size_t cnt)
+{
+	return 0;
+}
+static inline int trace_seq_puts(struct trace_seq *s, const char *str)
+{
+	return 0;
+}
+static inline int trace_seq_putc(struct trace_seq *s, unsigned char c)
+{
+	return 0;
+}
+static inline int
+trace_seq_putmem(struct trace_seq *s, const void *mem, size_t len)
+{
+	return 0;
+}
+static inline int trace_seq_putmem_hex(struct trace_seq *s, const void *mem,
+				       size_t len)
+{
+	return 0;
+}
+static inline void *trace_seq_reserve(struct trace_seq *s, size_t len)
+{
+	return NULL;
+}
+static inline int trace_seq_path(struct trace_seq *s, const struct path *path)
+{
+	return 0;
+}
+#endif /* CONFIG_TRACING */
+
+#endif /* _LINUX_TRACE_SEQ_H */
diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
new file mode 100644
index 00000000..51bd91d9
--- /dev/null
+++ b/include/linux/tracehook.h
@@ -0,0 +1,190 @@
+/*
+ * Tracing hooks
+ *
+ * Copyright (C) 2008-2009 Red Hat, Inc.  All rights reserved.
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License v.2.
+ *
+ * This file defines hook entry points called by core code where
+ * user tracing/debugging support might need to do something.  These
+ * entry points are called tracehook_*().  Each hook declared below
+ * has a detailed kerneldoc comment giving the context (locking et
+ * al) from which it is called, and the meaning of its return value.
+ *
+ * Each function here typically has only one call site, so it is ok
+ * to have some nontrivial tracehook_*() inlines.  In all cases, the
+ * fast path when no tracing is enabled should be very short.
+ *
+ * The purpose of this file and the tracehook_* layer is to consolidate
+ * the interface that the kernel core and arch code uses to enable any
+ * user debugging or tracing facility (such as ptrace).  The interfaces
+ * here are carefully documented so that maintainers of core and arch
+ * code do not need to think about the implementation details of the
+ * tracing facilities.  Likewise, maintainers of the tracing code do not
+ * need to understand all the calling core or arch code in detail, just
+ * documented circumstances of each call, such as locking conditions.
+ *
+ * If the calling core code changes so that locking is different, then
+ * it is ok to change the interface documented here.  The maintainer of
+ * core code changing should notify the maintainers of the tracing code
+ * that they need to work out the change.
+ *
+ * Some tracehook_*() inlines take arguments that the current tracing
+ * implementations might not necessarily use.  These function signatures
+ * are chosen to pass in all the information that is on hand in the
+ * caller and might conceivably be relevant to a tracer, so that the
+ * core code won't have to be updated when tracing adds more features.
+ * If a call site changes so that some of those parameters are no longer
+ * already on hand without extra work, then the tracehook_* interface
+ * can change so there is no make-work burden on the core code.  The
+ * maintainer of core code changing should notify the maintainers of the
+ * tracing code that they need to work out the change.
+ */
+
+#ifndef _LINUX_TRACEHOOK_H
+#define _LINUX_TRACEHOOK_H	1
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/security.h>
+struct linux_binprm;
+
+/*
+ * ptrace report for syscall entry and exit looks identical.
+ */
+static inline int ptrace_report_syscall(struct pt_regs *regs)
+{
+	int ptrace = current->ptrace;
+
+	if (!(ptrace & PT_PTRACED))
+		return 0;
+
+	ptrace_notify(SIGTRAP | ((ptrace & PT_TRACESYSGOOD) ? 0x80 : 0));
+
+	/*
+	 * this isn't the same as continuing with a signal, but it will do
+	 * for normal use.  strace only continues with a signal if the
+	 * stopping signal is not SIGTRAP.  -brl
+	 */
+	if (current->exit_code) {
+		send_sig(current->exit_code, current, 1);
+		current->exit_code = 0;
+	}
+
+	return fatal_signal_pending(current);
+}
+
+/**
+ * tracehook_report_syscall_entry - task is about to attempt a system call
+ * @regs:		user register state of current task
+ *
+ * This will be called if %TIF_SYSCALL_TRACE has been set, when the
+ * current task has just entered the kernel for a system call.
+ * Full user register state is available here.  Changing the values
+ * in @regs can affect the system call number and arguments to be tried.
+ * It is safe to block here, preventing the system call from beginning.
+ *
+ * Returns zero normally, or nonzero if the calling arch code should abort
+ * the system call.  That must prevent normal entry so no system call is
+ * made.  If @task ever returns to user mode after this, its register state
+ * is unspecified, but should be something harmless like an %ENOSYS error
+ * return.  It should preserve enough information so that syscall_rollback()
+ * can work (see asm-generic/syscall.h).
+ *
+ * Called without locks, just after entering kernel mode.
+ */
+static inline __must_check int tracehook_report_syscall_entry(
+	struct pt_regs *regs)
+{
+	return ptrace_report_syscall(regs);
+}
+
+/**
+ * tracehook_report_syscall_exit - task has just finished a system call
+ * @regs:		user register state of current task
+ * @step:		nonzero if simulating single-step or block-step
+ *
+ * This will be called if %TIF_SYSCALL_TRACE has been set, when the
+ * current task has just finished an attempted system call.  Full
+ * user register state is available here.  It is safe to block here,
+ * preventing signals from being processed.
+ *
+ * If @step is nonzero, this report is also in lieu of the normal
+ * trap that would follow the system call instruction because
+ * user_enable_block_step() or user_enable_single_step() was used.
+ * In this case, %TIF_SYSCALL_TRACE might not be set.
+ *
+ * Called without locks, just before checking for pending signals.
+ */
+static inline void tracehook_report_syscall_exit(struct pt_regs *regs, int step)
+{
+	if (step) {
+		siginfo_t info;
+		user_single_step_siginfo(current, regs, &info);
+		force_sig_info(SIGTRAP, &info, current);
+		return;
+	}
+
+	ptrace_report_syscall(regs);
+}
+
+/**
+ * tracehook_signal_handler - signal handler setup is complete
+ * @sig:		number of signal being delivered
+ * @info:		siginfo_t of signal being delivered
+ * @ka:			sigaction setting that chose the handler
+ * @regs:		user register state
+ * @stepping:		nonzero if debugger single-step or block-step in use
+ *
+ * Called by the arch code after a signal handler has been set up.
+ * Register and stack state reflects the user handler about to run.
+ * Signal mask changes have already been made.
+ *
+ * Called without locks, shortly before returning to user mode
+ * (or handling more signals).
+ */
+static inline void tracehook_signal_handler(int sig, siginfo_t *info,
+					    const struct k_sigaction *ka,
+					    struct pt_regs *regs, int stepping)
+{
+	if (stepping)
+		ptrace_notify(SIGTRAP);
+}
+
+#ifdef TIF_NOTIFY_RESUME
+/**
+ * set_notify_resume - cause tracehook_notify_resume() to be called
+ * @task:		task that will call tracehook_notify_resume()
+ *
+ * Calling this arranges that @task will call tracehook_notify_resume()
+ * before returning to user mode.  If it's already running in user mode,
+ * it will enter the kernel and call tracehook_notify_resume() soon.
+ * If it's blocked, it will not be woken.
+ */
+static inline void set_notify_resume(struct task_struct *task)
+{
+	if (!test_and_set_tsk_thread_flag(task, TIF_NOTIFY_RESUME))
+		kick_process(task);
+}
+
+/**
+ * tracehook_notify_resume - report when about to return to user mode
+ * @regs:		user-mode registers of @current task
+ *
+ * This is called when %TIF_NOTIFY_RESUME has been set.  Now we are
+ * about to return to user mode, and the user state in @regs can be
+ * inspected or adjusted.  The caller in arch code has cleared
+ * %TIF_NOTIFY_RESUME before the call.  If the flag gets set again
+ * asynchronously, this will be called again before we return to
+ * user mode.
+ *
+ * Called without locks.
+ */
+static inline void tracehook_notify_resume(struct pt_regs *regs)
+{
+}
+#endif	/* TIF_NOTIFY_RESUME */
+
+#endif	/* <linux/tracehook.h> */
diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h
new file mode 100644
index 00000000..bd96ecd0
--- /dev/null
+++ b/include/linux/tracepoint.h
@@ -0,0 +1,392 @@
+#ifndef _LINUX_TRACEPOINT_H
+#define _LINUX_TRACEPOINT_H
+
+/*
+ * Kernel Tracepoint API.
+ *
+ * See Documentation/trace/tracepoints.txt.
+ *
+ * (C) Copyright 2008 Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
+ *
+ * Heavily inspired from the Linux Kernel Markers.
+ *
+ * This file is released under the GPLv2.
+ * See the file COPYING for more details.
+ */
+
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/rcupdate.h>
+#include <linux/static_key.h>
+
+struct module;
+struct tracepoint;
+
+struct tracepoint_func {
+	void *func;
+	void *data;
+};
+
+struct tracepoint {
+	const char *name;		/* Tracepoint name */
+	struct static_key key;
+	void (*regfunc)(void);
+	void (*unregfunc)(void);
+	struct tracepoint_func __rcu *funcs;
+};
+
+/*
+ * Connect a probe to a tracepoint.
+ * Internal API, should not be used directly.
+ */
+extern int tracepoint_probe_register(const char *name, void *probe, void *data);
+
+/*
+ * Disconnect a probe from a tracepoint.
+ * Internal API, should not be used directly.
+ */
+extern int
+tracepoint_probe_unregister(const char *name, void *probe, void *data);
+
+extern int tracepoint_probe_register_noupdate(const char *name, void *probe,
+					      void *data);
+extern int tracepoint_probe_unregister_noupdate(const char *name, void *probe,
+						void *data);
+extern void tracepoint_probe_update_all(void);
+
+#ifdef CONFIG_MODULES
+struct tp_module {
+	struct list_head list;
+	unsigned int num_tracepoints;
+	struct tracepoint * const *tracepoints_ptrs;
+};
+#endif /* CONFIG_MODULES */
+
+struct tracepoint_iter {
+#ifdef CONFIG_MODULES
+	struct tp_module *module;
+#endif /* CONFIG_MODULES */
+	struct tracepoint * const *tracepoint;
+};
+
+extern void tracepoint_iter_start(struct tracepoint_iter *iter);
+extern void tracepoint_iter_next(struct tracepoint_iter *iter);
+extern void tracepoint_iter_stop(struct tracepoint_iter *iter);
+extern void tracepoint_iter_reset(struct tracepoint_iter *iter);
+
+/*
+ * tracepoint_synchronize_unregister must be called between the last tracepoint
+ * probe unregistration and the end of module exit to make sure there is no
+ * caller executing a probe when it is freed.
+ */
+static inline void tracepoint_synchronize_unregister(void)
+{
+	synchronize_sched();
+}
+
+#define PARAMS(args...) args
+
+#endif /* _LINUX_TRACEPOINT_H */
+
+/*
+ * Note: we keep the TRACE_EVENT and DECLARE_TRACE outside the include
+ *  file ifdef protection.
+ *  This is due to the way trace events work. If a file includes two
+ *  trace event headers under one "CREATE_TRACE_POINTS" the first include
+ *  will override the TRACE_EVENT and break the second include.
+ */
+
+#ifndef DECLARE_TRACE
+
+#define TP_PROTO(args...)	args
+#define TP_ARGS(args...)	args
+#define TP_CONDITION(args...)	args
+
+#ifdef CONFIG_TRACEPOINTS
+
+/*
+ * it_func[0] is never NULL because there is at least one element in the array
+ * when the array itself is non NULL.
+ *
+ * Note, the proto and args passed in includes "__data" as the first parameter.
+ * The reason for this is to handle the "void" prototype. If a tracepoint
+ * has a "void" prototype, then it is invalid to declare a function
+ * as "(void *, void)". The DECLARE_TRACE_NOARGS() will pass in just
+ * "void *data", where as the DECLARE_TRACE() will pass in "void *data, proto".
+ */
+#define __DO_TRACE(tp, proto, args, cond, prercu, postrcu)		\
+	do {								\
+		struct tracepoint_func *it_func_ptr;			\
+		void *it_func;						\
+		void *__data;						\
+									\
+		if (!(cond))						\
+			return;						\
+		prercu;							\
+		rcu_read_lock_sched_notrace();				\
+		it_func_ptr = rcu_dereference_sched((tp)->funcs);	\
+		if (it_func_ptr) {					\
+			do {						\
+				it_func = (it_func_ptr)->func;		\
+				__data = (it_func_ptr)->data;		\
+				((void(*)(proto))(it_func))(args);	\
+			} while ((++it_func_ptr)->func);		\
+		}							\
+		rcu_read_unlock_sched_notrace();			\
+		postrcu;						\
+	} while (0)
+
+/*
+ * Make sure the alignment of the structure in the __tracepoints section will
+ * not add unwanted padding between the beginning of the section and the
+ * structure. Force alignment to the same alignment as the section start.
+ */
+#define __DECLARE_TRACE(name, proto, args, cond, data_proto, data_args) \
+	extern struct tracepoint __tracepoint_##name;			\
+	static inline void trace_##name(proto)				\
+	{								\
+		if (static_key_false(&__tracepoint_##name.key))		\
+			__DO_TRACE(&__tracepoint_##name,		\
+				TP_PROTO(data_proto),			\
+				TP_ARGS(data_args),			\
+				TP_CONDITION(cond),,);			\
+	}								\
+	static inline void trace_##name##_rcuidle(proto)		\
+	{								\
+		if (static_branch(&__tracepoint_##name.key))		\
+			__DO_TRACE(&__tracepoint_##name,		\
+				TP_PROTO(data_proto),			\
+				TP_ARGS(data_args),			\
+				TP_CONDITION(cond),			\
+				rcu_idle_exit(),			\
+				rcu_idle_enter());			\
+	}								\
+	static inline int						\
+	register_trace_##name(void (*probe)(data_proto), void *data)	\
+	{								\
+		return tracepoint_probe_register(#name, (void *)probe,	\
+						 data);			\
+	}								\
+	static inline int						\
+	unregister_trace_##name(void (*probe)(data_proto), void *data)	\
+	{								\
+		return tracepoint_probe_unregister(#name, (void *)probe, \
+						   data);		\
+	}								\
+	static inline void						\
+	check_trace_callback_type_##name(void (*cb)(data_proto))	\
+	{								\
+	}
+
+/*
+ * We have no guarantee that gcc and the linker won't up-align the tracepoint
+ * structures, so we create an array of pointers that will be used for iteration
+ * on the tracepoints.
+ */
+#define DEFINE_TRACE_FN(name, reg, unreg)				 \
+	static const char __tpstrtab_##name[]				 \
+	__attribute__((section("__tracepoints_strings"))) = #name;	 \
+	struct tracepoint __tracepoint_##name				 \
+	__attribute__((section("__tracepoints"))) =			 \
+		{ __tpstrtab_##name, STATIC_KEY_INIT_FALSE, reg, unreg, NULL };\
+	static struct tracepoint * const __tracepoint_ptr_##name __used	 \
+	__attribute__((section("__tracepoints_ptrs"))) =		 \
+		&__tracepoint_##name;
+
+#define DEFINE_TRACE(name)						\
+	DEFINE_TRACE_FN(name, NULL, NULL);
+
+#define EXPORT_TRACEPOINT_SYMBOL_GPL(name)				\
+	EXPORT_SYMBOL_GPL(__tracepoint_##name)
+#define EXPORT_TRACEPOINT_SYMBOL(name)					\
+	EXPORT_SYMBOL(__tracepoint_##name)
+
+#else /* !CONFIG_TRACEPOINTS */
+#define __DECLARE_TRACE(name, proto, args, cond, data_proto, data_args) \
+	static inline void trace_##name(proto)				\
+	{ }								\
+	static inline void trace_##name##_rcuidle(proto)		\
+	{ }								\
+	static inline int						\
+	register_trace_##name(void (*probe)(data_proto),		\
+			      void *data)				\
+	{								\
+		return -ENOSYS;						\
+	}								\
+	static inline int						\
+	unregister_trace_##name(void (*probe)(data_proto),		\
+				void *data)				\
+	{								\
+		return -ENOSYS;						\
+	}								\
+	static inline void check_trace_callback_type_##name(void (*cb)(data_proto)) \
+	{								\
+	}
+
+#define DEFINE_TRACE_FN(name, reg, unreg)
+#define DEFINE_TRACE(name)
+#define EXPORT_TRACEPOINT_SYMBOL_GPL(name)
+#define EXPORT_TRACEPOINT_SYMBOL(name)
+
+#endif /* CONFIG_TRACEPOINTS */
+
+/*
+ * The need for the DECLARE_TRACE_NOARGS() is to handle the prototype
+ * (void). "void" is a special value in a function prototype and can
+ * not be combined with other arguments. Since the DECLARE_TRACE()
+ * macro adds a data element at the beginning of the prototype,
+ * we need a way to differentiate "(void *data, proto)" from
+ * "(void *data, void)". The second prototype is invalid.
+ *
+ * DECLARE_TRACE_NOARGS() passes "void" as the tracepoint prototype
+ * and "void *__data" as the callback prototype.
+ *
+ * DECLARE_TRACE() passes "proto" as the tracepoint protoype and
+ * "void *__data, proto" as the callback prototype.
+ */
+#define DECLARE_TRACE_NOARGS(name)					\
+		__DECLARE_TRACE(name, void, , 1, void *__data, __data)
+
+#define DECLARE_TRACE(name, proto, args)				\
+		__DECLARE_TRACE(name, PARAMS(proto), PARAMS(args), 1,	\
+				PARAMS(void *__data, proto),		\
+				PARAMS(__data, args))
+
+#define DECLARE_TRACE_CONDITION(name, proto, args, cond)		\
+	__DECLARE_TRACE(name, PARAMS(proto), PARAMS(args), PARAMS(cond), \
+			PARAMS(void *__data, proto),			\
+			PARAMS(__data, args))
+
+#define TRACE_EVENT_FLAGS(event, flag)
+
+#endif /* DECLARE_TRACE */
+
+#ifndef TRACE_EVENT
+/*
+ * For use with the TRACE_EVENT macro:
+ *
+ * We define a tracepoint, its arguments, its printk format
+ * and its 'fast binay record' layout.
+ *
+ * Firstly, name your tracepoint via TRACE_EVENT(name : the
+ * 'subsystem_event' notation is fine.
+ *
+ * Think about this whole construct as the
+ * 'trace_sched_switch() function' from now on.
+ *
+ *
+ *  TRACE_EVENT(sched_switch,
+ *
+ *	*
+ *	* A function has a regular function arguments
+ *	* prototype, declare it via TP_PROTO():
+ *	*
+ *
+ *	TP_PROTO(struct rq *rq, struct task_struct *prev,
+ *		 struct task_struct *next),
+ *
+ *	*
+ *	* Define the call signature of the 'function'.
+ *	* (Design sidenote: we use this instead of a
+ *	*  TP_PROTO1/TP_PROTO2/TP_PROTO3 ugliness.)
+ *	*
+ *
+ *	TP_ARGS(rq, prev, next),
+ *
+ *	*
+ *	* Fast binary tracing: define the trace record via
+ *	* TP_STRUCT__entry(). You can think about it like a
+ *	* regular C structure local variable definition.
+ *	*
+ *	* This is how the trace record is structured and will
+ *	* be saved into the ring buffer. These are the fields
+ *	* that will be exposed to user-space in
+ *	* /sys/kernel/debug/tracing/events/<*>/format.
+ *	*
+ *	* The declared 'local variable' is called '__entry'
+ *	*
+ *	* __field(pid_t, prev_prid) is equivalent to a standard declariton:
+ *	*
+ *	*	pid_t	prev_pid;
+ *	*
+ *	* __array(char, prev_comm, TASK_COMM_LEN) is equivalent to:
+ *	*
+ *	*	char	prev_comm[TASK_COMM_LEN];
+ *	*
+ *
+ *	TP_STRUCT__entry(
+ *		__array(	char,	prev_comm,	TASK_COMM_LEN	)
+ *		__field(	pid_t,	prev_pid			)
+ *		__field(	int,	prev_prio			)
+ *		__array(	char,	next_comm,	TASK_COMM_LEN	)
+ *		__field(	pid_t,	next_pid			)
+ *		__field(	int,	next_prio			)
+ *	),
+ *
+ *	*
+ *	* Assign the entry into the trace record, by embedding
+ *	* a full C statement block into TP_fast_assign(). You
+ *	* can refer to the trace record as '__entry' -
+ *	* otherwise you can put arbitrary C code in here.
+ *	*
+ *	* Note: this C code will execute every time a trace event
+ *	* happens, on an active tracepoint.
+ *	*
+ *
+ *	TP_fast_assign(
+ *		memcpy(__entry->next_comm, next->comm, TASK_COMM_LEN);
+ *		__entry->prev_pid	= prev->pid;
+ *		__entry->prev_prio	= prev->prio;
+ *		memcpy(__entry->prev_comm, prev->comm, TASK_COMM_LEN);
+ *		__entry->next_pid	= next->pid;
+ *		__entry->next_prio	= next->prio;
+ *	),
+ *
+ *	*
+ *	* Formatted output of a trace record via TP_printk().
+ *	* This is how the tracepoint will appear under ftrace
+ *	* plugins that make use of this tracepoint.
+ *	*
+ *	* (raw-binary tracing wont actually perform this step.)
+ *	*
+ *
+ *	TP_printk("task %s:%d [%d] ==> %s:%d [%d]",
+ *		__entry->prev_comm, __entry->prev_pid, __entry->prev_prio,
+ *		__entry->next_comm, __entry->next_pid, __entry->next_prio),
+ *
+ * );
+ *
+ * This macro construct is thus used for the regular printk format
+ * tracing setup, it is used to construct a function pointer based
+ * tracepoint callback (this is used by programmatic plugins and
+ * can also by used by generic instrumentation like SystemTap), and
+ * it is also used to expose a structured trace record in
+ * /sys/kernel/debug/tracing/events/.
+ *
+ * A set of (un)registration functions can be passed to the variant
+ * TRACE_EVENT_FN to perform any (un)registration work.
+ */
+
+#define DECLARE_EVENT_CLASS(name, proto, args, tstruct, assign, print)
+#define DEFINE_EVENT(template, name, proto, args)		\
+	DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
+#define DEFINE_EVENT_PRINT(template, name, proto, args, print)	\
+	DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
+#define DEFINE_EVENT_CONDITION(template, name, proto,		\
+			       args, cond)			\
+	DECLARE_TRACE_CONDITION(name, PARAMS(proto),		\
+				PARAMS(args), PARAMS(cond))
+
+#define TRACE_EVENT(name, proto, args, struct, assign, print)	\
+	DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
+#define TRACE_EVENT_FN(name, proto, args, struct,		\
+		assign, print, reg, unreg)			\
+	DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
+#define TRACE_EVENT_CONDITION(name, proto, args, cond,		\
+			      struct, assign, print)		\
+	DECLARE_TRACE_CONDITION(name, PARAMS(proto),		\
+				PARAMS(args), PARAMS(cond))
+
+#define TRACE_EVENT_FLAGS(event, flag)
+
+#endif /* ifdef TRACE_EVENT (see note above) */
diff --git a/include/linux/transport_class.h b/include/linux/transport_class.h
new file mode 100644
index 00000000..11087cdd
--- /dev/null
+++ b/include/linux/transport_class.h
@@ -0,0 +1,102 @@
+/*
+ * transport_class.h - a generic container for all transport classes
+ *
+ * Copyright (c) 2005 - James Bottomley <James.Bottomley@steeleye.com>
+ *
+ * This file is licensed under GPLv2
+ */
+
+#ifndef _TRANSPORT_CLASS_H_
+#define _TRANSPORT_CLASS_H_
+
+#include <linux/device.h>
+#include <linux/bug.h>
+#include <linux/attribute_container.h>
+
+struct transport_container;
+
+struct transport_class {
+	struct class class;
+	int (*setup)(struct transport_container *, struct device *,
+		     struct device *);
+	int (*configure)(struct transport_container *, struct device *,
+			 struct device *);
+	int (*remove)(struct transport_container *, struct device *,
+		      struct device *);
+};
+
+#define DECLARE_TRANSPORT_CLASS(cls, nm, su, rm, cfg)			\
+struct transport_class cls = {						\
+	.class = {							\
+		.name = nm,						\
+	},								\
+	.setup = su,							\
+	.remove = rm,							\
+	.configure = cfg,						\
+}
+
+
+struct anon_transport_class {
+	struct transport_class tclass;
+	struct attribute_container container;
+};
+
+#define DECLARE_ANON_TRANSPORT_CLASS(cls, mtch, cfg)		\
+struct anon_transport_class cls = {				\
+	.tclass = {						\
+		.configure = cfg,				\
+	},							\
+	. container = {						\
+		.match = mtch,					\
+	},							\
+}
+
+#define class_to_transport_class(x) \
+	container_of(x, struct transport_class, class)
+
+struct transport_container {
+	struct attribute_container ac;
+	const struct attribute_group *statistics;
+};
+
+#define attribute_container_to_transport_container(x) \
+	container_of(x, struct transport_container, ac)
+
+void transport_remove_device(struct device *);
+void transport_add_device(struct device *);
+void transport_setup_device(struct device *);
+void transport_configure_device(struct device *);
+void transport_destroy_device(struct device *);
+
+static inline void
+transport_register_device(struct device *dev)
+{
+	transport_setup_device(dev);
+	transport_add_device(dev);
+}
+
+static inline void
+transport_unregister_device(struct device *dev)
+{
+	transport_remove_device(dev);
+	transport_destroy_device(dev);
+}
+
+static inline int transport_container_register(struct transport_container *tc)
+{
+	return attribute_container_register(&tc->ac);
+}
+
+static inline void transport_container_unregister(struct transport_container *tc)
+{
+	if (unlikely(attribute_container_unregister(&tc->ac)))
+		BUG();
+}
+
+int transport_class_register(struct transport_class *);
+int anon_transport_class_register(struct anon_transport_class *);
+void transport_class_unregister(struct transport_class *);
+void anon_transport_class_unregister(struct anon_transport_class *);
+
+
+#endif
diff --git a/include/linux/trdevice.h b/include/linux/trdevice.h
new file mode 100644
index 00000000..bfc84a7a
--- /dev/null
+++ b/include/linux/trdevice.h
@@ -0,0 +1,37 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  NET  is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the Token-ring handlers.
+ *
+ * Version:	@(#)eth.h	1.0.4	05/13/93
+ *
+ * Authors:	Ross Biro
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		Relocated to include/linux where it belongs by Alan Cox 
+ *							<gw4pts@gw4pts.ampr.org>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ *	WARNING: This move may well be temporary. This file will get merged with others RSN.
+ *
+ */
+#ifndef _LINUX_TRDEVICE_H
+#define _LINUX_TRDEVICE_H
+
+
+#include <linux/if_tr.h>
+
+#ifdef __KERNEL__
+extern __be16 tr_type_trans(struct sk_buff *skb, struct net_device *dev);
+extern void tr_source_route(struct sk_buff *skb, struct trh_hdr *trh, struct net_device *dev);
+extern struct net_device *alloc_trdev(int sizeof_priv);
+
+#endif
+
+#endif	/* _LINUX_TRDEVICE_H */
diff --git a/include/linux/tsacct_kern.h b/include/linux/tsacct_kern.h
new file mode 100644
index 00000000..7e50ac79
--- /dev/null
+++ b/include/linux/tsacct_kern.h
@@ -0,0 +1,34 @@
+/*
+ * tsacct_kern.h - kernel header for system accounting over taskstats interface
+ *
+ * Copyright (C) Jay Lan	SGI
+ */
+
+#ifndef _LINUX_TSACCT_KERN_H
+#define _LINUX_TSACCT_KERN_H
+
+#include <linux/taskstats.h>
+
+#ifdef CONFIG_TASKSTATS
+extern void bacct_add_tsk(struct taskstats *stats, struct task_struct *tsk);
+#else
+static inline void bacct_add_tsk(struct taskstats *stats, struct task_struct *tsk)
+{}
+#endif /* CONFIG_TASKSTATS */
+
+#ifdef CONFIG_TASK_XACCT
+extern void xacct_add_tsk(struct taskstats *stats, struct task_struct *p);
+extern void acct_update_integrals(struct task_struct *tsk);
+extern void acct_clear_integrals(struct task_struct *tsk);
+#else
+static inline void xacct_add_tsk(struct taskstats *stats, struct task_struct *p)
+{}
+static inline void acct_update_integrals(struct task_struct *tsk)
+{}
+static inline void acct_clear_integrals(struct task_struct *tsk)
+{}
+#endif /* CONFIG_TASK_XACCT */
+
+#endif
+
+
diff --git a/include/linux/tty.h b/include/linux/tty.h
new file mode 100644
index 00000000..9f47ab54
--- /dev/null
+++ b/include/linux/tty.h
@@ -0,0 +1,672 @@
+#ifndef _LINUX_TTY_H
+#define _LINUX_TTY_H
+
+/*
+ * 'tty.h' defines some structures used by tty_io.c and some defines.
+ */
+
+#define NR_LDISCS		30
+
+/* line disciplines */
+#define N_TTY		0
+#define N_SLIP		1
+#define N_MOUSE		2
+#define N_PPP		3
+#define N_STRIP		4
+#define N_AX25		5
+#define N_X25		6	/* X.25 async */
+#define N_6PACK		7
+#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964		9	/* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL	10	/* Reserved for Profibus */
+#define N_IRDA		11	/* Linux IrDa - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data */
+				/* cards about SMS messages */
+#define N_HDLC		13	/* synchronous HDLC */
+#define N_SYNC_PPP	14	/* synchronous PPP */
+#define N_HCI		15	/* Bluetooth HCI UART */
+#define N_GIGASET_M101	16	/* Siemens Gigaset M101 serial DECT adapter */
+#define N_SLCAN		17	/* Serial / USB serial CAN Adaptors */
+#define N_PPS		18	/* Pulse per Second */
+#define N_V253		19	/* Codec control over voice modem */
+#define N_CAIF		20      /* CAIF protocol for talking to modems */
+#define N_GSM0710	21	/* GSM 0710 Mux */
+#define N_TI_WL		22	/* for TI's WL BT, FM, GPS combo chips */
+#define N_TRACESINK	23	/* Trace data routing for MIPI P1149.7 */
+#define N_TRACEROUTER	24	/* Trace data routing for MIPI P1149.7 */
+
+#ifdef __KERNEL__
+#include <linux/fs.h>
+#include <linux/major.h>
+#include <linux/termios.h>
+#include <linux/workqueue.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_ldisc.h>
+#include <linux/mutex.h>
+
+
+
+/*
+ * (Note: the *_driver.minor_start values 1, 64, 128, 192 are
+ * hardcoded at present.)
+ */
+#define NR_UNIX98_PTY_DEFAULT	4096      /* Default maximum for Unix98 ptys */
+#define NR_UNIX98_PTY_RESERVE	1024	  /* Default reserve for main devpts */
+#define NR_UNIX98_PTY_MAX	(1 << MINORBITS) /* Absolute limit */
+
+/*
+ * This character is the same as _POSIX_VDISABLE: it cannot be used as
+ * a c_cc[] character, but indicates that a particular special character
+ * isn't in use (eg VINTR has no character etc)
+ */
+#define __DISABLED_CHAR '\0'
+
+struct tty_buffer {
+	struct tty_buffer *next;
+	char *char_buf_ptr;
+	unsigned char *flag_buf_ptr;
+	int used;
+	int size;
+	int commit;
+	int read;
+	/* Data points here */
+	unsigned long data[0];
+};
+
+/*
+ * We default to dicing tty buffer allocations to this many characters
+ * in order to avoid multiple page allocations. We know the size of
+ * tty_buffer itself but it must also be taken into account that the
+ * the buffer is 256 byte aligned. See tty_buffer_find for the allocation
+ * logic this must match
+ */
+
+#define TTY_BUFFER_PAGE	(((PAGE_SIZE - sizeof(struct tty_buffer)) / 2) & ~0xFF)
+
+
+struct tty_bufhead {
+	struct work_struct work;
+	spinlock_t lock;
+	struct tty_buffer *head;	/* Queue head */
+	struct tty_buffer *tail;	/* Active buffer */
+	struct tty_buffer *free;	/* Free queue head */
+	int memory_used;		/* Buffer space used excluding
+								free queue */
+};
+/*
+ * When a break, frame error, or parity error happens, these codes are
+ * stuffed into the flags buffer.
+ */
+#define TTY_NORMAL	0
+#define TTY_BREAK	1
+#define TTY_FRAME	2
+#define TTY_PARITY	3
+#define TTY_OVERRUN	4
+
+#define INTR_CHAR(tty) ((tty)->termios->c_cc[VINTR])
+#define QUIT_CHAR(tty) ((tty)->termios->c_cc[VQUIT])
+#define ERASE_CHAR(tty) ((tty)->termios->c_cc[VERASE])
+#define KILL_CHAR(tty) ((tty)->termios->c_cc[VKILL])
+#define EOF_CHAR(tty) ((tty)->termios->c_cc[VEOF])
+#define TIME_CHAR(tty) ((tty)->termios->c_cc[VTIME])
+#define MIN_CHAR(tty) ((tty)->termios->c_cc[VMIN])
+#define SWTC_CHAR(tty) ((tty)->termios->c_cc[VSWTC])
+#define START_CHAR(tty) ((tty)->termios->c_cc[VSTART])
+#define STOP_CHAR(tty) ((tty)->termios->c_cc[VSTOP])
+#define SUSP_CHAR(tty) ((tty)->termios->c_cc[VSUSP])
+#define EOL_CHAR(tty) ((tty)->termios->c_cc[VEOL])
+#define REPRINT_CHAR(tty) ((tty)->termios->c_cc[VREPRINT])
+#define DISCARD_CHAR(tty) ((tty)->termios->c_cc[VDISCARD])
+#define WERASE_CHAR(tty) ((tty)->termios->c_cc[VWERASE])
+#define LNEXT_CHAR(tty)	((tty)->termios->c_cc[VLNEXT])
+#define EOL2_CHAR(tty) ((tty)->termios->c_cc[VEOL2])
+
+#define _I_FLAG(tty, f)	((tty)->termios->c_iflag & (f))
+#define _O_FLAG(tty, f)	((tty)->termios->c_oflag & (f))
+#define _C_FLAG(tty, f)	((tty)->termios->c_cflag & (f))
+#define _L_FLAG(tty, f)	((tty)->termios->c_lflag & (f))
+
+#define I_IGNBRK(tty)	_I_FLAG((tty), IGNBRK)
+#define I_BRKINT(tty)	_I_FLAG((tty), BRKINT)
+#define I_IGNPAR(tty)	_I_FLAG((tty), IGNPAR)
+#define I_PARMRK(tty)	_I_FLAG((tty), PARMRK)
+#define I_INPCK(tty)	_I_FLAG((tty), INPCK)
+#define I_ISTRIP(tty)	_I_FLAG((tty), ISTRIP)
+#define I_INLCR(tty)	_I_FLAG((tty), INLCR)
+#define I_IGNCR(tty)	_I_FLAG((tty), IGNCR)
+#define I_ICRNL(tty)	_I_FLAG((tty), ICRNL)
+#define I_IUCLC(tty)	_I_FLAG((tty), IUCLC)
+#define I_IXON(tty)	_I_FLAG((tty), IXON)
+#define I_IXANY(tty)	_I_FLAG((tty), IXANY)
+#define I_IXOFF(tty)	_I_FLAG((tty), IXOFF)
+#define I_IMAXBEL(tty)	_I_FLAG((tty), IMAXBEL)
+#define I_IUTF8(tty)	_I_FLAG((tty), IUTF8)
+
+#define O_OPOST(tty)	_O_FLAG((tty), OPOST)
+#define O_OLCUC(tty)	_O_FLAG((tty), OLCUC)
+#define O_ONLCR(tty)	_O_FLAG((tty), ONLCR)
+#define O_OCRNL(tty)	_O_FLAG((tty), OCRNL)
+#define O_ONOCR(tty)	_O_FLAG((tty), ONOCR)
+#define O_ONLRET(tty)	_O_FLAG((tty), ONLRET)
+#define O_OFILL(tty)	_O_FLAG((tty), OFILL)
+#define O_OFDEL(tty)	_O_FLAG((tty), OFDEL)
+#define O_NLDLY(tty)	_O_FLAG((tty), NLDLY)
+#define O_CRDLY(tty)	_O_FLAG((tty), CRDLY)
+#define O_TABDLY(tty)	_O_FLAG((tty), TABDLY)
+#define O_BSDLY(tty)	_O_FLAG((tty), BSDLY)
+#define O_VTDLY(tty)	_O_FLAG((tty), VTDLY)
+#define O_FFDLY(tty)	_O_FLAG((tty), FFDLY)
+
+#define C_BAUD(tty)	_C_FLAG((tty), CBAUD)
+#define C_CSIZE(tty)	_C_FLAG((tty), CSIZE)
+#define C_CSTOPB(tty)	_C_FLAG((tty), CSTOPB)
+#define C_CREAD(tty)	_C_FLAG((tty), CREAD)
+#define C_PARENB(tty)	_C_FLAG((tty), PARENB)
+#define C_PARODD(tty)	_C_FLAG((tty), PARODD)
+#define C_HUPCL(tty)	_C_FLAG((tty), HUPCL)
+#define C_CLOCAL(tty)	_C_FLAG((tty), CLOCAL)
+#define C_CIBAUD(tty)	_C_FLAG((tty), CIBAUD)
+#define C_CRTSCTS(tty)	_C_FLAG((tty), CRTSCTS)
+
+#define L_ISIG(tty)	_L_FLAG((tty), ISIG)
+#define L_ICANON(tty)	_L_FLAG((tty), ICANON)
+#define L_XCASE(tty)	_L_FLAG((tty), XCASE)
+#define L_ECHO(tty)	_L_FLAG((tty), ECHO)
+#define L_ECHOE(tty)	_L_FLAG((tty), ECHOE)
+#define L_ECHOK(tty)	_L_FLAG((tty), ECHOK)
+#define L_ECHONL(tty)	_L_FLAG((tty), ECHONL)
+#define L_NOFLSH(tty)	_L_FLAG((tty), NOFLSH)
+#define L_TOSTOP(tty)	_L_FLAG((tty), TOSTOP)
+#define L_ECHOCTL(tty)	_L_FLAG((tty), ECHOCTL)
+#define L_ECHOPRT(tty)	_L_FLAG((tty), ECHOPRT)
+#define L_ECHOKE(tty)	_L_FLAG((tty), ECHOKE)
+#define L_FLUSHO(tty)	_L_FLAG((tty), FLUSHO)
+#define L_PENDIN(tty)	_L_FLAG((tty), PENDIN)
+#define L_IEXTEN(tty)	_L_FLAG((tty), IEXTEN)
+#define L_EXTPROC(tty)	_L_FLAG((tty), EXTPROC)
+
+struct device;
+struct signal_struct;
+
+/*
+ * Port level information. Each device keeps its own port level information
+ * so provide a common structure for those ports wanting to use common support
+ * routines.
+ *
+ * The tty port has a different lifetime to the tty so must be kept apart.
+ * In addition be careful as tty -> port mappings are valid for the life
+ * of the tty object but in many cases port -> tty mappings are valid only
+ * until a hangup so don't use the wrong path.
+ */
+
+struct tty_port;
+
+struct tty_port_operations {
+	/* Return 1 if the carrier is raised */
+	int (*carrier_raised)(struct tty_port *port);
+	/* Control the DTR line */
+	void (*dtr_rts)(struct tty_port *port, int raise);
+	/* Called when the last close completes or a hangup finishes
+	   IFF the port was initialized. Do not use to free resources. Called
+	   under the port mutex to serialize against activate/shutdowns */
+	void (*shutdown)(struct tty_port *port);
+	void (*drop)(struct tty_port *port);
+	/* Called under the port mutex from tty_port_open, serialized using
+	   the port mutex */
+        /* FIXME: long term getting the tty argument *out* of this would be
+           good for consoles */
+	int (*activate)(struct tty_port *port, struct tty_struct *tty);
+	/* Called on the final put of a port */
+	void (*destruct)(struct tty_port *port);
+};
+	
+struct tty_port {
+	struct tty_struct	*tty;		/* Back pointer */
+	const struct tty_port_operations *ops;	/* Port operations */
+	spinlock_t		lock;		/* Lock protecting tty field */
+	int			blocked_open;	/* Waiting to open */
+	int			count;		/* Usage count */
+	wait_queue_head_t	open_wait;	/* Open waiters */
+	wait_queue_head_t	close_wait;	/* Close waiters */
+	wait_queue_head_t	delta_msr_wait;	/* Modem status change */
+	unsigned long		flags;		/* TTY flags ASY_*/
+	unsigned char		console:1;	/* port is a console */
+	struct mutex		mutex;		/* Locking */
+	struct mutex		buf_mutex;	/* Buffer alloc lock */
+	unsigned char		*xmit_buf;	/* Optional buffer */
+	unsigned int		close_delay;	/* Close port delay */
+	unsigned int		closing_wait;	/* Delay for output */
+	int			drain_delay;	/* Set to zero if no pure time
+						   based drain is needed else
+						   set to size of fifo */
+	struct kref		kref;		/* Ref counter */
+};
+
+/*
+ * Where all of the state associated with a tty is kept while the tty
+ * is open.  Since the termios state should be kept even if the tty
+ * has been closed --- for things like the baud rate, etc --- it is
+ * not stored here, but rather a pointer to the real state is stored
+ * here.  Possible the winsize structure should have the same
+ * treatment, but (1) the default 80x24 is usually right and (2) it's
+ * most often used by a windowing system, which will set the correct
+ * size each time the window is created or resized anyway.
+ * 						- TYT, 9/14/92
+ */
+
+struct tty_operations;
+
+struct tty_struct {
+	int	magic;
+	struct kref kref;
+	struct device *dev;
+	struct tty_driver *driver;
+	const struct tty_operations *ops;
+	int index;
+
+	/* Protects ldisc changes: Lock tty not pty */
+	struct mutex ldisc_mutex;
+	struct tty_ldisc *ldisc;
+
+	struct mutex termios_mutex;
+	spinlock_t ctrl_lock;
+	/* Termios values are protected by the termios mutex */
+	struct ktermios *termios, *termios_locked;
+	struct termiox *termiox;	/* May be NULL for unsupported */
+	char name[64];
+	struct pid *pgrp;		/* Protected by ctrl lock */
+	struct pid *session;
+	unsigned long flags;
+	int count;
+	struct winsize winsize;		/* termios mutex */
+	unsigned char stopped:1, hw_stopped:1, flow_stopped:1, packet:1;
+	unsigned char low_latency:1, warned:1;
+	unsigned char ctrl_status;	/* ctrl_lock */
+	unsigned int receive_room;	/* Bytes free for queue */
+
+	struct tty_struct *link;
+	struct fasync_struct *fasync;
+	struct tty_bufhead buf;		/* Locked internally */
+	int alt_speed;		/* For magic substitution of 38400 bps */
+	wait_queue_head_t write_wait;
+	wait_queue_head_t read_wait;
+	struct work_struct hangup_work;
+	void *disc_data;
+	void *driver_data;
+	struct list_head tty_files;
+
+#define N_TTY_BUF_SIZE 4096
+
+	/*
+	 * The following is data for the N_TTY line discipline.  For
+	 * historical reasons, this is included in the tty structure.
+	 * Mostly locked by the BKL.
+	 */
+	unsigned int column;
+	unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
+	unsigned char closing:1;
+	unsigned char echo_overrun:1;
+	unsigned short minimum_to_wake;
+	unsigned long overrun_time;
+	int num_overrun;
+	unsigned long process_char_map[256/(8*sizeof(unsigned long))];
+	char *read_buf;
+	int read_head;
+	int read_tail;
+	int read_cnt;
+	unsigned long read_flags[N_TTY_BUF_SIZE/(8*sizeof(unsigned long))];
+	unsigned char *echo_buf;
+	unsigned int echo_pos;
+	unsigned int echo_cnt;
+	int canon_data;
+	unsigned long canon_head;
+	unsigned int canon_column;
+	struct mutex atomic_read_lock;
+	struct mutex atomic_write_lock;
+	struct mutex output_lock;
+	struct mutex echo_lock;
+	unsigned char *write_buf;
+	int write_cnt;
+	spinlock_t read_lock;
+	/* If the tty has a pending do_SAK, queue it here - akpm */
+	struct work_struct SAK_work;
+	struct tty_port *port;
+};
+
+/* Each of a tty's open files has private_data pointing to tty_file_private */
+struct tty_file_private {
+	struct tty_struct *tty;
+	struct file *file;
+	struct list_head list;
+};
+
+/* tty magic number */
+#define TTY_MAGIC		0x5401
+
+/*
+ * These bits are used in the flags field of the tty structure.
+ *
+ * So that interrupts won't be able to mess up the queues,
+ * copy_to_cooked must be atomic with respect to itself, as must
+ * tty->write.  Thus, you must use the inline functions set_bit() and
+ * clear_bit() to make things atomic.
+ */
+#define TTY_THROTTLED 		0	/* Call unthrottle() at threshold min */
+#define TTY_IO_ERROR 		1	/* Cause an I/O error (may be no ldisc too) */
+#define TTY_OTHER_CLOSED 	2	/* Other side (if any) has closed */
+#define TTY_EXCLUSIVE 		3	/* Exclusive open mode */
+#define TTY_DEBUG 		4	/* Debugging */
+#define TTY_DO_WRITE_WAKEUP 	5	/* Call write_wakeup after queuing new */
+#define TTY_PUSH 		6	/* n_tty private */
+#define TTY_CLOSING 		7	/* ->close() in progress */
+#define TTY_LDISC 		9	/* Line discipline attached */
+#define TTY_LDISC_CHANGING 	10	/* Line discipline changing */
+#define TTY_LDISC_OPEN	 	11	/* Line discipline is open */
+#define TTY_HW_COOK_OUT 	14	/* Hardware can do output cooking */
+#define TTY_HW_COOK_IN 		15	/* Hardware can do input cooking */
+#define TTY_PTY_LOCK 		16	/* pty private */
+#define TTY_NO_WRITE_SPLIT 	17	/* Preserve write boundaries to driver */
+#define TTY_HUPPED 		18	/* Post driver->hangup() */
+#define TTY_FLUSHING		19	/* Flushing to ldisc in progress */
+#define TTY_FLUSHPENDING	20	/* Queued buffer flush pending */
+#define TTY_HUPPING 		21	/* ->hangup() in progress */
+
+#define TTY_WRITE_FLUSH(tty) tty_write_flush((tty))
+
+extern void tty_write_flush(struct tty_struct *);
+
+extern struct ktermios tty_std_termios;
+
+extern void console_init(void);
+extern int vcs_init(void);
+
+extern struct class *tty_class;
+
+/**
+ *	tty_kref_get		-	get a tty reference
+ *	@tty: tty device
+ *
+ *	Return a new reference to a tty object. The caller must hold
+ *	sufficient locks/counts to ensure that their existing reference cannot
+ *	go away
+ */
+
+static inline struct tty_struct *tty_kref_get(struct tty_struct *tty)
+{
+	if (tty)
+		kref_get(&tty->kref);
+	return tty;
+}
+extern void tty_kref_put(struct tty_struct *tty);
+
+extern int tty_paranoia_check(struct tty_struct *tty, struct inode *inode,
+			      const char *routine);
+extern char *tty_name(struct tty_struct *tty, char *buf);
+extern void tty_wait_until_sent(struct tty_struct *tty, long timeout);
+extern int tty_check_change(struct tty_struct *tty);
+extern void stop_tty(struct tty_struct *tty);
+extern void start_tty(struct tty_struct *tty);
+extern int tty_register_driver(struct tty_driver *driver);
+extern int tty_unregister_driver(struct tty_driver *driver);
+extern struct device *tty_register_device(struct tty_driver *driver,
+					  unsigned index, struct device *dev);
+extern void tty_unregister_device(struct tty_driver *driver, unsigned index);
+extern int tty_read_raw_data(struct tty_struct *tty, unsigned char *bufp,
+			     int buflen);
+extern void tty_write_message(struct tty_struct *tty, char *msg);
+extern int tty_put_char(struct tty_struct *tty, unsigned char c);
+extern int tty_chars_in_buffer(struct tty_struct *tty);
+extern int tty_write_room(struct tty_struct *tty);
+extern void tty_driver_flush_buffer(struct tty_struct *tty);
+extern void tty_throttle(struct tty_struct *tty);
+extern void tty_unthrottle(struct tty_struct *tty);
+extern int tty_do_resize(struct tty_struct *tty, struct winsize *ws);
+extern void tty_driver_remove_tty(struct tty_driver *driver,
+				  struct tty_struct *tty);
+extern void tty_shutdown(struct tty_struct *tty);
+extern void tty_free_termios(struct tty_struct *tty);
+extern int is_current_pgrp_orphaned(void);
+extern struct pid *tty_get_pgrp(struct tty_struct *tty);
+extern int is_ignored(int sig);
+extern int tty_signal(int sig, struct tty_struct *tty);
+extern void tty_hangup(struct tty_struct *tty);
+extern void tty_vhangup(struct tty_struct *tty);
+extern void tty_vhangup_locked(struct tty_struct *tty);
+extern void tty_vhangup_self(void);
+extern void tty_unhangup(struct file *filp);
+extern int tty_hung_up_p(struct file *filp);
+extern void do_SAK(struct tty_struct *tty);
+extern void __do_SAK(struct tty_struct *tty);
+extern void disassociate_ctty(int priv);
+extern void no_tty(void);
+extern void tty_flip_buffer_push(struct tty_struct *tty);
+extern void tty_flush_to_ldisc(struct tty_struct *tty);
+extern void tty_buffer_free_all(struct tty_struct *tty);
+extern void tty_buffer_flush(struct tty_struct *tty);
+extern void tty_buffer_init(struct tty_struct *tty);
+extern speed_t tty_get_baud_rate(struct tty_struct *tty);
+extern speed_t tty_termios_baud_rate(struct ktermios *termios);
+extern speed_t tty_termios_input_baud_rate(struct ktermios *termios);
+extern void tty_termios_encode_baud_rate(struct ktermios *termios,
+						speed_t ibaud, speed_t obaud);
+extern void tty_encode_baud_rate(struct tty_struct *tty,
+						speed_t ibaud, speed_t obaud);
+extern void tty_termios_copy_hw(struct ktermios *new, struct ktermios *old);
+extern int tty_termios_hw_change(struct ktermios *a, struct ktermios *b);
+extern int tty_set_termios(struct tty_struct *tty, struct ktermios *kt);
+
+extern struct tty_ldisc *tty_ldisc_ref(struct tty_struct *);
+extern void tty_ldisc_deref(struct tty_ldisc *);
+extern struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *);
+extern void tty_ldisc_hangup(struct tty_struct *tty);
+extern const struct file_operations tty_ldiscs_proc_fops;
+
+extern void tty_wakeup(struct tty_struct *tty);
+extern void tty_ldisc_flush(struct tty_struct *tty);
+
+extern long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
+extern int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
+			unsigned int cmd, unsigned long arg);
+extern int tty_perform_flush(struct tty_struct *tty, unsigned long arg);
+extern dev_t tty_devnum(struct tty_struct *tty);
+extern void proc_clear_tty(struct task_struct *p);
+extern struct tty_struct *get_current_tty(void);
+extern void tty_default_fops(struct file_operations *fops);
+extern struct tty_struct *alloc_tty_struct(void);
+extern int tty_alloc_file(struct file *file);
+extern void tty_add_file(struct tty_struct *tty, struct file *file);
+extern void tty_free_file(struct file *file);
+extern void free_tty_struct(struct tty_struct *tty);
+extern void initialize_tty_struct(struct tty_struct *tty,
+		struct tty_driver *driver, int idx);
+extern void deinitialize_tty_struct(struct tty_struct *tty);
+extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx);
+extern int tty_release(struct inode *inode, struct file *filp);
+extern int tty_init_termios(struct tty_struct *tty);
+extern int tty_standard_install(struct tty_driver *driver,
+		struct tty_struct *tty);
+
+extern struct tty_struct *tty_pair_get_tty(struct tty_struct *tty);
+extern struct tty_struct *tty_pair_get_pty(struct tty_struct *tty);
+
+extern struct mutex tty_mutex;
+extern spinlock_t tty_files_lock;
+
+extern void tty_write_unlock(struct tty_struct *tty);
+extern int tty_write_lock(struct tty_struct *tty, int ndelay);
+#define tty_is_writelocked(tty)  (mutex_is_locked(&tty->atomic_write_lock))
+
+extern void tty_port_init(struct tty_port *port);
+extern int tty_port_alloc_xmit_buf(struct tty_port *port);
+extern void tty_port_free_xmit_buf(struct tty_port *port);
+extern void tty_port_put(struct tty_port *port);
+
+static inline struct tty_port *tty_port_get(struct tty_port *port)
+{
+	if (port)
+		kref_get(&port->kref);
+	return port;
+}
+
+extern struct tty_struct *tty_port_tty_get(struct tty_port *port);
+extern void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty);
+extern int tty_port_carrier_raised(struct tty_port *port);
+extern void tty_port_raise_dtr_rts(struct tty_port *port);
+extern void tty_port_lower_dtr_rts(struct tty_port *port);
+extern void tty_port_hangup(struct tty_port *port);
+extern int tty_port_block_til_ready(struct tty_port *port,
+				struct tty_struct *tty, struct file *filp);
+extern int tty_port_close_start(struct tty_port *port,
+				struct tty_struct *tty, struct file *filp);
+extern void tty_port_close_end(struct tty_port *port, struct tty_struct *tty);
+extern void tty_port_close(struct tty_port *port,
+				struct tty_struct *tty, struct file *filp);
+extern int tty_port_open(struct tty_port *port,
+				struct tty_struct *tty, struct file *filp);
+static inline int tty_port_users(struct tty_port *port)
+{
+	return port->count + port->blocked_open;
+}
+
+extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc);
+extern int tty_unregister_ldisc(int disc);
+extern int tty_set_ldisc(struct tty_struct *tty, int ldisc);
+extern int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty);
+extern void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty);
+extern void tty_ldisc_init(struct tty_struct *tty);
+extern void tty_ldisc_deinit(struct tty_struct *tty);
+extern void tty_ldisc_begin(void);
+/* This last one is just for the tty layer internals and shouldn't be used elsewhere */
+extern void tty_ldisc_enable(struct tty_struct *tty);
+
+
+/* n_tty.c */
+extern struct tty_ldisc_ops tty_ldisc_N_TTY;
+extern void n_tty_inherit_ops(struct tty_ldisc_ops *ops);
+
+/* tty_audit.c */
+#ifdef CONFIG_AUDIT
+extern void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
+			       size_t size);
+extern void tty_audit_exit(void);
+extern void tty_audit_fork(struct signal_struct *sig);
+extern void tty_audit_tiocsti(struct tty_struct *tty, char ch);
+extern void tty_audit_push(struct tty_struct *tty);
+extern int tty_audit_push_task(struct task_struct *tsk,
+			       uid_t loginuid, u32 sessionid);
+#else
+static inline void tty_audit_add_data(struct tty_struct *tty,
+				      unsigned char *data, size_t size)
+{
+}
+static inline void tty_audit_tiocsti(struct tty_struct *tty, char ch)
+{
+}
+static inline void tty_audit_exit(void)
+{
+}
+static inline void tty_audit_fork(struct signal_struct *sig)
+{
+}
+static inline void tty_audit_push(struct tty_struct *tty)
+{
+}
+static inline int tty_audit_push_task(struct task_struct *tsk,
+				      uid_t loginuid, u32 sessionid)
+{
+	return 0;
+}
+#endif
+
+/* tty_io.c */
+extern int __init tty_init(void);
+
+/* tty_ioctl.c */
+extern int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file,
+		       unsigned int cmd, unsigned long arg);
+extern long n_tty_compat_ioctl_helper(struct tty_struct *tty, struct file *file,
+		       unsigned int cmd, unsigned long arg);
+
+/* serial.c */
+
+extern void serial_console_init(void);
+
+/* pcxx.c */
+
+extern int pcxe_open(struct tty_struct *tty, struct file *filp);
+
+/* vt.c */
+
+extern int vt_ioctl(struct tty_struct *tty,
+		    unsigned int cmd, unsigned long arg);
+
+extern long vt_compat_ioctl(struct tty_struct *tty,
+		     unsigned int cmd, unsigned long arg);
+
+/* tty_mutex.c */
+/* functions for preparation of BKL removal */
+extern void __lockfunc tty_lock(void) __acquires(tty_lock);
+extern void __lockfunc tty_unlock(void) __releases(tty_lock);
+
+/*
+ * this shall be called only from where BTM is held (like close)
+ *
+ * We need this to ensure nobody waits for us to finish while we are waiting.
+ * Without this we were encountering system stalls.
+ *
+ * This should be indeed removed with BTM removal later.
+ *
+ * Locking: BTM required. Nobody is allowed to hold port->mutex.
+ */
+static inline void tty_wait_until_sent_from_close(struct tty_struct *tty,
+		long timeout)
+{
+	tty_unlock(); /* tty->ops->close holds the BTM, drop it while waiting */
+	tty_wait_until_sent(tty, timeout);
+	tty_lock();
+}
+
+/*
+ * wait_event_interruptible_tty -- wait for a condition with the tty lock held
+ *
+ * The condition we are waiting for might take a long time to
+ * become true, or might depend on another thread taking the
+ * BTM. In either case, we need to drop the BTM to guarantee
+ * forward progress. This is a leftover from the conversion
+ * from the BKL and should eventually get removed as the BTM
+ * falls out of use.
+ *
+ * Do not use in new code.
+ */
+#define wait_event_interruptible_tty(wq, condition)			\
+({									\
+	int __ret = 0;							\
+	if (!(condition)) {						\
+		__wait_event_interruptible_tty(wq, condition, __ret);	\
+	}								\
+	__ret;								\
+})
+
+#define __wait_event_interruptible_tty(wq, condition, ret)		\
+do {									\
+	DEFINE_WAIT(__wait);						\
+									\
+	for (;;) {							\
+		prepare_to_wait(&wq, &__wait, TASK_INTERRUPTIBLE);	\
+		if (condition)						\
+			break;						\
+		if (!signal_pending(current)) {				\
+			tty_unlock();					\
+			schedule();					\
+			tty_lock();					\
+			continue;					\
+		}							\
+		ret = -ERESTARTSYS;					\
+		break;							\
+	}								\
+	finish_wait(&wq, &__wait);					\
+} while (0)
+
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
new file mode 100644
index 00000000..6e6dbb74
--- /dev/null
+++ b/include/linux/tty_driver.h
@@ -0,0 +1,412 @@
+#ifndef _LINUX_TTY_DRIVER_H
+#define _LINUX_TTY_DRIVER_H
+
+/*
+ * This structure defines the interface between the low-level tty
+ * driver and the tty routines.  The following routines can be
+ * defined; unless noted otherwise, they are optional, and can be
+ * filled in with a null pointer.
+ *
+ * struct tty_struct * (*lookup)(struct tty_driver *self, int idx)
+ *
+ *	Return the tty device corresponding to idx, NULL if there is not
+ *	one currently in use and an ERR_PTR value on error. Called under
+ *	tty_mutex (for now!)
+ *
+ *	Optional method. Default behaviour is to use the ttys array
+ *
+ * int (*install)(struct tty_driver *self, struct tty_struct *tty)
+ *
+ *	Install a new tty into the tty driver internal tables. Used in
+ *	conjunction with lookup and remove methods.
+ *
+ *	Optional method. Default behaviour is to use the ttys array
+ *
+ * void (*remove)(struct tty_driver *self, struct tty_struct *tty)
+ *
+ *	Remove a closed tty from the tty driver internal tables. Used in
+ *	conjunction with lookup and remove methods.
+ *
+ *	Optional method. Default behaviour is to use the ttys array
+ *
+ * int  (*open)(struct tty_struct * tty, struct file * filp);
+ *
+ * 	This routine is called when a particular tty device is opened.
+ * 	This routine is mandatory; if this routine is not filled in,
+ * 	the attempted open will fail with ENODEV.
+ *
+ *	Required method.
+ *     
+ * void (*close)(struct tty_struct * tty, struct file * filp);
+ *
+ * 	This routine is called when a particular tty device is closed.
+ *
+ *	Required method.
+ *
+ * void (*shutdown)(struct tty_struct * tty);
+ *
+ * 	This routine is called synchronously when a particular tty device
+ *	is closed for the last time freeing up the resources.
+ *	Note that tty_shutdown() is not called if ops->shutdown is defined.
+ *	This means one is responsible to take care of calling ops->remove (e.g.
+ *	via tty_driver_remove_tty) and releasing tty->termios.
+ *	Note that this hook may be called from *all* the contexts where one
+ *	uses tty refcounting (e.g. tty_port_tty_get).
+ *
+ *
+ * void (*cleanup)(struct tty_struct * tty);
+ *
+ *	This routine is called asynchronously when a particular tty device
+ *	is closed for the last time freeing up the resources. This is
+ *	actually the second part of shutdown for routines that might sleep.
+ *
+ *
+ * int (*write)(struct tty_struct * tty,
+ * 		 const unsigned char *buf, int count);
+ *
+ * 	This routine is called by the kernel to write a series of
+ * 	characters to the tty device.  The characters may come from
+ * 	user space or kernel space.  This routine will return the
+ *	number of characters actually accepted for writing.
+ *
+ *	Optional: Required for writable devices.
+ *
+ * int (*put_char)(struct tty_struct *tty, unsigned char ch);
+ *
+ * 	This routine is called by the kernel to write a single
+ * 	character to the tty device.  If the kernel uses this routine,
+ * 	it must call the flush_chars() routine (if defined) when it is
+ * 	done stuffing characters into the driver.  If there is no room
+ * 	in the queue, the character is ignored.
+ *
+ *	Optional: Kernel will use the write method if not provided.
+ *
+ *	Note: Do not call this function directly, call tty_put_char
+ *
+ * void (*flush_chars)(struct tty_struct *tty);
+ *
+ * 	This routine is called by the kernel after it has written a
+ * 	series of characters to the tty device using put_char().  
+ *
+ *	Optional:
+ *
+ *	Note: Do not call this function directly, call tty_driver_flush_chars
+ * 
+ * int  (*write_room)(struct tty_struct *tty);
+ *
+ * 	This routine returns the numbers of characters the tty driver
+ * 	will accept for queuing to be written.  This number is subject
+ * 	to change as output buffers get emptied, or if the output flow
+ *	control is acted.
+ *
+ *	Required if write method is provided else not needed.
+ *
+ *	Note: Do not call this function directly, call tty_write_room
+ * 
+ * int  (*ioctl)(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
+ *
+ * 	This routine allows the tty driver to implement
+ *	device-specific ioctls.  If the ioctl number passed in cmd
+ * 	is not recognized by the driver, it should return ENOIOCTLCMD.
+ *
+ *	Optional
+ *
+ * long (*compat_ioctl)(struct tty_struct *tty,,
+ * 	                unsigned int cmd, unsigned long arg);
+ *
+ * 	implement ioctl processing for 32 bit process on 64 bit system
+ *
+ *	Optional
+ * 
+ * void (*set_termios)(struct tty_struct *tty, struct ktermios * old);
+ *
+ * 	This routine allows the tty driver to be notified when
+ * 	device's termios settings have changed.
+ *
+ *	Optional: Called under the termios lock
+ *
+ *
+ * void (*set_ldisc)(struct tty_struct *tty);
+ *
+ * 	This routine allows the tty driver to be notified when the
+ * 	device's termios settings have changed.
+ *
+ *	Optional: Called under BKL (currently)
+ * 
+ * void (*throttle)(struct tty_struct * tty);
+ *
+ * 	This routine notifies the tty driver that input buffers for
+ * 	the line discipline are close to full, and it should somehow
+ * 	signal that no more characters should be sent to the tty.
+ *
+ *	Optional: Always invoke via tty_throttle(), called under the
+ *	termios lock.
+ * 
+ * void (*unthrottle)(struct tty_struct * tty);
+ *
+ * 	This routine notifies the tty drivers that it should signals
+ * 	that characters can now be sent to the tty without fear of
+ * 	overrunning the input buffers of the line disciplines.
+ * 
+ *	Optional: Always invoke via tty_unthrottle(), called under the
+ *	termios lock.
+ *
+ * void (*stop)(struct tty_struct *tty);
+ *
+ * 	This routine notifies the tty driver that it should stop
+ * 	outputting characters to the tty device.  
+ *
+ *	Optional:
+ *
+ *	Note: Call stop_tty not this method.
+ * 
+ * void (*start)(struct tty_struct *tty);
+ *
+ * 	This routine notifies the tty driver that it resume sending
+ *	characters to the tty device.
+ *
+ *	Optional:
+ *
+ *	Note: Call start_tty not this method.
+ * 
+ * void (*hangup)(struct tty_struct *tty);
+ *
+ * 	This routine notifies the tty driver that it should hang up the
+ * 	tty device.
+ *
+ *	Optional:
+ *
+ * int (*break_ctl)(struct tty_struct *tty, int state);
+ *
+ * 	This optional routine requests the tty driver to turn on or
+ * 	off BREAK status on the RS-232 port.  If state is -1,
+ * 	then the BREAK status should be turned on; if state is 0, then
+ * 	BREAK should be turned off.
+ *
+ * 	If this routine is implemented, the high-level tty driver will
+ * 	handle the following ioctls: TCSBRK, TCSBRKP, TIOCSBRK,
+ * 	TIOCCBRK.
+ *
+ *	If the driver sets TTY_DRIVER_HARDWARE_BREAK then the interface
+ *	will also be called with actual times and the hardware is expected
+ *	to do the delay work itself. 0 and -1 are still used for on/off.
+ *
+ *	Optional: Required for TCSBRK/BRKP/etc handling.
+ *
+ * void (*wait_until_sent)(struct tty_struct *tty, int timeout);
+ * 
+ * 	This routine waits until the device has written out all of the
+ * 	characters in its transmitter FIFO.
+ *
+ *	Optional: If not provided the device is assumed to have no FIFO
+ *
+ *	Note: Usually correct to call tty_wait_until_sent
+ *
+ * void (*send_xchar)(struct tty_struct *tty, char ch);
+ *
+ * 	This routine is used to send a high-priority XON/XOFF
+ * 	character to the device.
+ *
+ *	Optional: If not provided then the write method is called under
+ *	the atomic write lock to keep it serialized with the ldisc.
+ *
+ * int (*resize)(struct tty_struct *tty, struct winsize *ws)
+ *
+ *	Called when a termios request is issued which changes the
+ *	requested terminal geometry.
+ *
+ *	Optional: the default action is to update the termios structure
+ *	without error. This is usually the correct behaviour. Drivers should
+ *	not force errors here if they are not resizable objects (eg a serial
+ *	line). See tty_do_resize() if you need to wrap the standard method
+ *	in your own logic - the usual case.
+ *
+ * void (*set_termiox)(struct tty_struct *tty, struct termiox *new);
+ *
+ *	Called when the device receives a termiox based ioctl. Passes down
+ *	the requested data from user space. This method will not be invoked
+ *	unless the tty also has a valid tty->termiox pointer.
+ *
+ *	Optional: Called under the termios lock
+ *
+ * int (*get_icount)(struct tty_struct *tty, struct serial_icounter *icount);
+ *
+ *	Called when the device receives a TIOCGICOUNT ioctl. Passed a kernel
+ *	structure to complete. This method is optional and will only be called
+ *	if provided (otherwise EINVAL will be returned).
+ */
+
+#include <linux/export.h>
+#include <linux/fs.h>
+#include <linux/list.h>
+#include <linux/cdev.h>
+#include <linux/termios.h>
+
+struct tty_struct;
+struct tty_driver;
+struct serial_icounter_struct;
+
+struct tty_operations {
+	struct tty_struct * (*lookup)(struct tty_driver *driver,
+			struct inode *inode, int idx);
+	int  (*install)(struct tty_driver *driver, struct tty_struct *tty);
+	void (*remove)(struct tty_driver *driver, struct tty_struct *tty);
+	int  (*open)(struct tty_struct * tty, struct file * filp);
+	void (*close)(struct tty_struct * tty, struct file * filp);
+	void (*shutdown)(struct tty_struct *tty);
+	void (*cleanup)(struct tty_struct *tty);
+	int  (*write)(struct tty_struct * tty,
+		      const unsigned char *buf, int count);
+	int  (*put_char)(struct tty_struct *tty, unsigned char ch);
+	void (*flush_chars)(struct tty_struct *tty);
+	int  (*write_room)(struct tty_struct *tty);
+	int  (*chars_in_buffer)(struct tty_struct *tty);
+	int  (*ioctl)(struct tty_struct *tty,
+		    unsigned int cmd, unsigned long arg);
+	long (*compat_ioctl)(struct tty_struct *tty,
+			     unsigned int cmd, unsigned long arg);
+	void (*set_termios)(struct tty_struct *tty, struct ktermios * old);
+	void (*throttle)(struct tty_struct * tty);
+	void (*unthrottle)(struct tty_struct * tty);
+	void (*stop)(struct tty_struct *tty);
+	void (*start)(struct tty_struct *tty);
+	void (*hangup)(struct tty_struct *tty);
+	int (*break_ctl)(struct tty_struct *tty, int state);
+	void (*flush_buffer)(struct tty_struct *tty);
+	void (*set_ldisc)(struct tty_struct *tty);
+	void (*wait_until_sent)(struct tty_struct *tty, int timeout);
+	void (*send_xchar)(struct tty_struct *tty, char ch);
+	int (*tiocmget)(struct tty_struct *tty);
+	int (*tiocmset)(struct tty_struct *tty,
+			unsigned int set, unsigned int clear);
+	int (*resize)(struct tty_struct *tty, struct winsize *ws);
+	int (*set_termiox)(struct tty_struct *tty, struct termiox *tnew);
+	int (*get_icount)(struct tty_struct *tty,
+				struct serial_icounter_struct *icount);
+#ifdef CONFIG_CONSOLE_POLL
+	int (*poll_init)(struct tty_driver *driver, int line, char *options);
+	int (*poll_get_char)(struct tty_driver *driver, int line);
+	void (*poll_put_char)(struct tty_driver *driver, int line, char ch);
+#endif
+	const struct file_operations *proc_fops;
+};
+
+struct tty_driver {
+	int	magic;		/* magic number for this structure */
+	struct kref kref;	/* Reference management */
+	struct cdev cdev;
+	struct module	*owner;
+	const char	*driver_name;
+	const char	*name;
+	int	name_base;	/* offset of printed name */
+	int	major;		/* major device number */
+	int	minor_start;	/* start of minor device number */
+	int	num;		/* number of devices allocated */
+	short	type;		/* type of tty driver */
+	short	subtype;	/* subtype of tty driver */
+	struct ktermios init_termios; /* Initial termios */
+	int	flags;		/* tty driver flags */
+	struct proc_dir_entry *proc_entry; /* /proc fs entry */
+	struct tty_driver *other; /* only used for the PTY driver */
+
+	/*
+	 * Pointer to the tty data structures
+	 */
+	struct tty_struct **ttys;
+	struct ktermios **termios;
+	void *driver_state;
+
+	/*
+	 * Driver methods
+	 */
+
+	const struct tty_operations *ops;
+	struct list_head tty_drivers;
+};
+
+extern struct list_head tty_drivers;
+
+extern struct tty_driver *__alloc_tty_driver(int lines, struct module *owner);
+extern void put_tty_driver(struct tty_driver *driver);
+extern void tty_set_operations(struct tty_driver *driver,
+			const struct tty_operations *op);
+extern struct tty_driver *tty_find_polling_driver(char *name, int *line);
+
+extern void tty_driver_kref_put(struct tty_driver *driver);
+
+#define alloc_tty_driver(lines) __alloc_tty_driver(lines, THIS_MODULE)
+
+static inline struct tty_driver *tty_driver_kref_get(struct tty_driver *d)
+{
+	kref_get(&d->kref);
+	return d;
+}
+
+/* tty driver magic number */
+#define TTY_DRIVER_MAGIC		0x5402
+
+/*
+ * tty driver flags
+ * 
+ * TTY_DRIVER_RESET_TERMIOS --- requests the tty layer to reset the
+ * 	termios setting when the last process has closed the device.
+ * 	Used for PTY's, in particular.
+ * 
+ * TTY_DRIVER_REAL_RAW --- if set, indicates that the driver will
+ * 	guarantee never not to set any special character handling
+ * 	flags if ((IGNBRK || (!BRKINT && !PARMRK)) && (IGNPAR ||
+ * 	!INPCK)).  That is, if there is no reason for the driver to
+ * 	send notifications of parity and break characters up to the
+ * 	line driver, it won't do so.  This allows the line driver to
+ *	optimize for this case if this flag is set.  (Note that there
+ * 	is also a promise, if the above case is true, not to signal
+ * 	overruns, either.)
+ *
+ * TTY_DRIVER_DYNAMIC_DEV --- if set, the individual tty devices need
+ *	to be registered with a call to tty_register_device() when the
+ *	device is found in the system and unregistered with a call to
+ *	tty_unregister_device() so the devices will be show up
+ *	properly in sysfs.  If not set, driver->num entries will be
+ *	created by the tty core in sysfs when tty_register_driver() is
+ *	called.  This is to be used by drivers that have tty devices
+ *	that can appear and disappear while the main tty driver is
+ *	registered with the tty core.
+ *
+ * TTY_DRIVER_DEVPTS_MEM -- don't use the standard arrays, instead
+ *	use dynamic memory keyed through the devpts filesystem.  This
+ *	is only applicable to the pty driver.
+ *
+ * TTY_DRIVER_HARDWARE_BREAK -- hardware handles break signals. Pass
+ *	the requested timeout to the caller instead of using a simple
+ *	on/off interface.
+ *
+ */
+#define TTY_DRIVER_INSTALLED		0x0001
+#define TTY_DRIVER_RESET_TERMIOS	0x0002
+#define TTY_DRIVER_REAL_RAW		0x0004
+#define TTY_DRIVER_DYNAMIC_DEV		0x0008
+#define TTY_DRIVER_DEVPTS_MEM		0x0010
+#define TTY_DRIVER_HARDWARE_BREAK	0x0020
+
+/* tty driver types */
+#define TTY_DRIVER_TYPE_SYSTEM		0x0001
+#define TTY_DRIVER_TYPE_CONSOLE		0x0002
+#define TTY_DRIVER_TYPE_SERIAL		0x0003
+#define TTY_DRIVER_TYPE_PTY		0x0004
+#define TTY_DRIVER_TYPE_SCC		0x0005	/* scc driver */
+#define TTY_DRIVER_TYPE_SYSCONS		0x0006
+
+/* system subtypes (magic, used by tty_io.c) */
+#define SYSTEM_TYPE_TTY			0x0001
+#define SYSTEM_TYPE_CONSOLE		0x0002
+#define SYSTEM_TYPE_SYSCONS		0x0003
+#define SYSTEM_TYPE_SYSPTMX		0x0004
+
+/* pty subtypes (magic, used by tty_io.c) */
+#define PTY_TYPE_MASTER			0x0001
+#define PTY_TYPE_SLAVE			0x0002
+
+/* serial subtype definitions */
+#define SERIAL_TYPE_NORMAL	1
+
+#endif /* #ifdef _LINUX_TTY_DRIVER_H */
diff --git a/include/linux/tty_flip.h b/include/linux/tty_flip.h
new file mode 100644
index 00000000..9239d033
--- /dev/null
+++ b/include/linux/tty_flip.h
@@ -0,0 +1,28 @@
+#ifndef _LINUX_TTY_FLIP_H
+#define _LINUX_TTY_FLIP_H
+
+extern int tty_buffer_request_room(struct tty_struct *tty, size_t size);
+extern int tty_insert_flip_string_flags(struct tty_struct *tty, const unsigned char *chars, const char *flags, size_t size);
+extern int tty_insert_flip_string_fixed_flag(struct tty_struct *tty, const unsigned char *chars, char flag, size_t size);
+extern int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars, size_t size);
+extern int tty_prepare_flip_string_flags(struct tty_struct *tty, unsigned char **chars, char **flags, size_t size);
+void tty_schedule_flip(struct tty_struct *tty);
+
+static inline int tty_insert_flip_char(struct tty_struct *tty,
+					unsigned char ch, char flag)
+{
+	struct tty_buffer *tb = tty->buf.tail;
+	if (tb && tb->used < tb->size) {
+		tb->flag_buf_ptr[tb->used] = flag;
+		tb->char_buf_ptr[tb->used++] = ch;
+		return 1;
+	}
+	return tty_insert_flip_string_flags(tty, &ch, &flag, 1);
+}
+
+static inline int tty_insert_flip_string(struct tty_struct *tty, const unsigned char *chars, size_t size)
+{
+	return tty_insert_flip_string_fixed_flag(tty, chars, TTY_NORMAL, size);
+}
+
+#endif /* _LINUX_TTY_FLIP_H */
diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h
new file mode 100644
index 00000000..ff7dc086
--- /dev/null
+++ b/include/linux/tty_ldisc.h
@@ -0,0 +1,166 @@
+#ifndef _LINUX_TTY_LDISC_H
+#define _LINUX_TTY_LDISC_H
+
+/*
+ * This structure defines the interface between the tty line discipline
+ * implementation and the tty routines.  The following routines can be
+ * defined; unless noted otherwise, they are optional, and can be
+ * filled in with a null pointer.
+ *
+ * int	(*open)(struct tty_struct *);
+ *
+ * 	This function is called when the line discipline is associated
+ * 	with the tty.  The line discipline can use this as an
+ * 	opportunity to initialize any state needed by the ldisc routines.
+ * 
+ * void	(*close)(struct tty_struct *);
+ *
+ *	This function is called when the line discipline is being
+ * 	shutdown, either because the tty is being closed or because
+ * 	the tty is being changed to use a new line discipline
+ * 
+ * void	(*flush_buffer)(struct tty_struct *tty);
+ *
+ * 	This function instructs the line discipline to clear its
+ * 	buffers of any input characters it may have queued to be
+ * 	delivered to the user mode process.
+ * 
+ * ssize_t (*chars_in_buffer)(struct tty_struct *tty);
+ *
+ * 	This function returns the number of input characters the line
+ *	discipline may have queued up to be delivered to the user mode
+ *	process.
+ * 
+ * ssize_t (*read)(struct tty_struct * tty, struct file * file,
+ *		   unsigned char * buf, size_t nr);
+ *
+ * 	This function is called when the user requests to read from
+ * 	the tty.  The line discipline will return whatever characters
+ * 	it has buffered up for the user.  If this function is not
+ * 	defined, the user will receive an EIO error.
+ * 
+ * ssize_t (*write)(struct tty_struct * tty, struct file * file,
+ * 		    const unsigned char * buf, size_t nr);
+ *
+ * 	This function is called when the user requests to write to the
+ * 	tty.  The line discipline will deliver the characters to the
+ * 	low-level tty device for transmission, optionally performing
+ * 	some processing on the characters first.  If this function is
+ * 	not defined, the user will receive an EIO error.
+ * 
+ * int	(*ioctl)(struct tty_struct * tty, struct file * file,
+ * 		 unsigned int cmd, unsigned long arg);
+ *
+ *	This function is called when the user requests an ioctl which
+ * 	is not handled by the tty layer or the low-level tty driver.
+ * 	It is intended for ioctls which affect line discpline
+ * 	operation.  Note that the search order for ioctls is (1) tty
+ * 	layer, (2) tty low-level driver, (3) line discpline.  So a
+ * 	low-level driver can "grab" an ioctl request before the line
+ * 	discpline has a chance to see it.
+ * 
+ * long	(*compat_ioctl)(struct tty_struct * tty, struct file * file,
+ * 		        unsigned int cmd, unsigned long arg);
+ *
+ *      Process ioctl calls from 32-bit process on 64-bit system
+ *
+ * void	(*set_termios)(struct tty_struct *tty, struct ktermios * old);
+ *
+ * 	This function notifies the line discpline that a change has
+ * 	been made to the termios structure.
+ * 
+ * int	(*poll)(struct tty_struct * tty, struct file * file,
+ * 		  poll_table *wait);
+ *
+ * 	This function is called when a user attempts to select/poll on a
+ * 	tty device.  It is solely the responsibility of the line
+ * 	discipline to handle poll requests.
+ *
+ * void	(*receive_buf)(struct tty_struct *, const unsigned char *cp,
+ * 		       char *fp, int count);
+ *
+ * 	This function is called by the low-level tty driver to send
+ * 	characters received by the hardware to the line discpline for
+ * 	processing.  <cp> is a pointer to the buffer of input
+ * 	character received by the device.  <fp> is a pointer to a
+ * 	pointer of flag bytes which indicate whether a character was
+ * 	received with a parity error, etc.
+ * 
+ * void	(*write_wakeup)(struct tty_struct *);
+ *
+ * 	This function is called by the low-level tty driver to signal
+ * 	that line discpline should try to send more characters to the
+ * 	low-level driver for transmission.  If the line discpline does
+ * 	not have any more data to send, it can just return.
+ *
+ * int (*hangup)(struct tty_struct *)
+ *
+ *	Called on a hangup. Tells the discipline that it should
+ *	cease I/O to the tty driver. Can sleep. The driver should
+ *	seek to perform this action quickly but should wait until
+ *	any pending driver I/O is completed.
+ *
+ * void (*dcd_change)(struct tty_struct *tty, unsigned int status,
+ *			struct pps_event_time *ts)
+ *
+ *	Tells the discipline that the DCD pin has changed its status and
+ *	the relative timestamp. Pointer ts cannot be NULL.
+ */
+
+#include <linux/fs.h>
+#include <linux/wait.h>
+#include <linux/pps_kernel.h>
+
+struct tty_ldisc_ops {
+	int	magic;
+	char	*name;
+	int	num;
+	int	flags;
+	
+	/*
+	 * The following routines are called from above.
+	 */
+	int	(*open)(struct tty_struct *);
+	void	(*close)(struct tty_struct *);
+	void	(*flush_buffer)(struct tty_struct *tty);
+	ssize_t	(*chars_in_buffer)(struct tty_struct *tty);
+	ssize_t	(*read)(struct tty_struct * tty, struct file * file,
+			unsigned char __user * buf, size_t nr);
+	ssize_t	(*write)(struct tty_struct * tty, struct file * file,
+			 const unsigned char * buf, size_t nr);	
+	int	(*ioctl)(struct tty_struct * tty, struct file * file,
+			 unsigned int cmd, unsigned long arg);
+	long	(*compat_ioctl)(struct tty_struct * tty, struct file * file,
+				unsigned int cmd, unsigned long arg);
+	void	(*set_termios)(struct tty_struct *tty, struct ktermios * old);
+	unsigned int (*poll)(struct tty_struct *, struct file *,
+			     struct poll_table_struct *);
+	int	(*hangup)(struct tty_struct *tty);
+	
+	/*
+	 * The following routines are called from below.
+	 */
+	void	(*receive_buf)(struct tty_struct *, const unsigned char *cp,
+			       char *fp, int count);
+	void	(*write_wakeup)(struct tty_struct *);
+	void	(*dcd_change)(struct tty_struct *, unsigned int,
+				struct pps_event_time *);
+
+	struct  module *owner;
+	
+	int refcount;
+};
+
+struct tty_ldisc {
+	struct tty_ldisc_ops *ops;
+	atomic_t users;
+};
+
+#define TTY_LDISC_MAGIC	0x5403
+
+#define LDISC_FLAG_DEFINED	0x00000001
+
+#define MODULE_ALIAS_LDISC(ldisc) \
+	MODULE_ALIAS("tty-ldisc-" __stringify(ldisc))
+
+#endif /* _LINUX_TTY_LDISC_H */
diff --git a/include/linux/typecheck.h b/include/linux/typecheck.h
new file mode 100644
index 00000000..eb5b74a5
--- /dev/null
+++ b/include/linux/typecheck.h
@@ -0,0 +1,24 @@
+#ifndef TYPECHECK_H_INCLUDED
+#define TYPECHECK_H_INCLUDED
+
+/*
+ * Check at compile time that something is of a particular type.
+ * Always evaluates to 1 so you may use it easily in comparisons.
+ */
+#define typecheck(type,x) \
+({	type __dummy; \
+	typeof(x) __dummy2; \
+	(void)(&__dummy == &__dummy2); \
+	1; \
+})
+
+/*
+ * Check at compile time that 'function' is a certain type, or is a pointer
+ * to that type (needs to use typedef for the function type.)
+ */
+#define typecheck_fn(type,function) \
+({	typeof(type) __tmp = function; \
+	(void)__tmp; \
+})
+
+#endif		/* TYPECHECK_H_INCLUDED */
diff --git a/include/linux/types.h b/include/linux/types.h
new file mode 100644
index 00000000..7f480db6
--- /dev/null
+++ b/include/linux/types.h
@@ -0,0 +1,260 @@
+#ifndef _LINUX_TYPES_H
+#define _LINUX_TYPES_H
+
+#include <asm/types.h>
+
+#ifndef __ASSEMBLY__
+#ifdef	__KERNEL__
+
+#define DECLARE_BITMAP(name,bits) \
+	unsigned long name[BITS_TO_LONGS(bits)]
+#else
+#ifndef __EXPORTED_HEADERS__
+#warning "Attempt to use kernel headers from user space, see http://kernelnewbies.org/KernelHeaders"
+#endif /* __EXPORTED_HEADERS__ */
+#endif
+
+#include <linux/posix_types.h>
+
+#ifdef __KERNEL__
+
+typedef __u32 __kernel_dev_t;
+
+typedef __kernel_fd_set		fd_set;
+typedef __kernel_dev_t		dev_t;
+typedef __kernel_ino_t		ino_t;
+typedef __kernel_mode_t		mode_t;
+typedef unsigned short		umode_t;
+typedef __kernel_nlink_t	nlink_t;
+typedef __kernel_off_t		off_t;
+typedef __kernel_pid_t		pid_t;
+typedef __kernel_daddr_t	daddr_t;
+typedef __kernel_key_t		key_t;
+typedef __kernel_suseconds_t	suseconds_t;
+typedef __kernel_timer_t	timer_t;
+typedef __kernel_clockid_t	clockid_t;
+typedef __kernel_mqd_t		mqd_t;
+
+typedef _Bool			bool;
+
+typedef __kernel_uid32_t	uid_t;
+typedef __kernel_gid32_t	gid_t;
+typedef __kernel_uid16_t        uid16_t;
+typedef __kernel_gid16_t        gid16_t;
+
+typedef unsigned long		uintptr_t;
+
+#ifdef CONFIG_UID16
+/* This is defined by include/asm-{arch}/posix_types.h */
+typedef __kernel_old_uid_t	old_uid_t;
+typedef __kernel_old_gid_t	old_gid_t;
+#endif /* CONFIG_UID16 */
+
+#if defined(__GNUC__)
+typedef __kernel_loff_t		loff_t;
+#endif
+
+/*
+ * The following typedefs are also protected by individual ifdefs for
+ * historical reasons:
+ */
+#ifndef _SIZE_T
+#define _SIZE_T
+typedef __kernel_size_t		size_t;
+#endif
+
+#ifndef _SSIZE_T
+#define _SSIZE_T
+typedef __kernel_ssize_t	ssize_t;
+#endif
+
+#ifndef _PTRDIFF_T
+#define _PTRDIFF_T
+typedef __kernel_ptrdiff_t	ptrdiff_t;
+#endif
+
+#ifndef _TIME_T
+#define _TIME_T
+typedef __kernel_time_t		time_t;
+#endif
+
+#ifndef _CLOCK_T
+#define _CLOCK_T
+typedef __kernel_clock_t	clock_t;
+#endif
+
+#ifndef _CADDR_T
+#define _CADDR_T
+typedef __kernel_caddr_t	caddr_t;
+#endif
+
+/* bsd */
+typedef unsigned char		u_char;
+typedef unsigned short		u_short;
+typedef unsigned int		u_int;
+typedef unsigned long		u_long;
+
+/* sysv */
+typedef unsigned char		unchar;
+typedef unsigned short		ushort;
+typedef unsigned int		uint;
+typedef unsigned long		ulong;
+
+#ifndef __BIT_TYPES_DEFINED__
+#define __BIT_TYPES_DEFINED__
+
+typedef		__u8		u_int8_t;
+typedef		__s8		int8_t;
+typedef		__u16		u_int16_t;
+typedef		__s16		int16_t;
+typedef		__u32		u_int32_t;
+typedef		__s32		int32_t;
+
+#endif /* !(__BIT_TYPES_DEFINED__) */
+
+typedef		__u8		uint8_t;
+typedef		__u16		uint16_t;
+typedef		__u32		uint32_t;
+
+#if defined(__GNUC__)
+typedef		__u64		uint64_t;
+typedef		__u64		u_int64_t;
+typedef		__s64		int64_t;
+#endif
+
+/* this is a special 64bit data type that is 8-byte aligned */
+#define aligned_u64 __u64 __attribute__((aligned(8)))
+#define aligned_be64 __be64 __attribute__((aligned(8)))
+#define aligned_le64 __le64 __attribute__((aligned(8)))
+
+/**
+ * The type used for indexing onto a disc or disc partition.
+ *
+ * Linux always considers sectors to be 512 bytes long independently
+ * of the devices real block size.
+ *
+ * blkcnt_t is the type of the inode's block count.
+ */
+#ifdef CONFIG_LBDAF
+typedef u64 sector_t;
+typedef u64 blkcnt_t;
+#else
+typedef unsigned long sector_t;
+typedef unsigned long blkcnt_t;
+#endif
+
+/*
+ * The type of an index into the pagecache.  Use a #define so asm/types.h
+ * can override it.
+ */
+#ifndef pgoff_t
+#define pgoff_t unsigned long
+#endif
+
+#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
+typedef u64 dma_addr_t;
+#else
+typedef u32 dma_addr_t;
+#endif /* dma_addr_t */
+
+#endif /* __KERNEL__ */
+
+/*
+ * Below are truly Linux-specific types that should never collide with
+ * any application/library that wants linux/types.h.
+ */
+
+#ifdef __CHECKER__
+#define __bitwise__ __attribute__((bitwise))
+#else
+#define __bitwise__
+#endif
+#ifdef __CHECK_ENDIAN__
+#define __bitwise __bitwise__
+#else
+#define __bitwise
+#endif
+
+typedef __u16 __bitwise __le16;
+typedef __u16 __bitwise __be16;
+typedef __u32 __bitwise __le32;
+typedef __u32 __bitwise __be32;
+typedef __u64 __bitwise __le64;
+typedef __u64 __bitwise __be64;
+
+typedef __u16 __bitwise __sum16;
+typedef __u32 __bitwise __wsum;
+
+/*
+ * aligned_u64 should be used in defining kernel<->userspace ABIs to avoid
+ * common 32/64-bit compat problems.
+ * 64-bit values align to 4-byte boundaries on x86_32 (and possibly other
+ * architectures) and to 8-byte boundaries on 64-bit architectures.  The new
+ * aligned_64 type enforces 8-byte alignment so that structs containing
+ * aligned_64 values have the same alignment on 32-bit and 64-bit architectures.
+ * No conversions are necessary between 32-bit user-space and a 64-bit kernel.
+ */
+#define __aligned_u64 __u64 __attribute__((aligned(8)))
+#define __aligned_be64 __be64 __attribute__((aligned(8)))
+#define __aligned_le64 __le64 __attribute__((aligned(8)))
+
+#ifdef __KERNEL__
+typedef unsigned __bitwise__ gfp_t;
+typedef unsigned __bitwise__ fmode_t;
+
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
+typedef u64 phys_addr_t;
+#else
+typedef u32 phys_addr_t;
+#endif
+
+typedef phys_addr_t resource_size_t;
+
+/*
+ * This type is the placeholder for a hardware interrupt number. It has to be
+ * big enough to enclose whatever representation is used by a given platform.
+ */
+typedef unsigned long irq_hw_number_t;
+
+typedef struct {
+	int counter;
+} atomic_t;
+
+#ifdef CONFIG_64BIT
+typedef struct {
+	long counter;
+} atomic64_t;
+#endif
+
+struct list_head {
+	struct list_head *next, *prev;
+};
+
+struct hlist_head {
+	struct hlist_node *first;
+};
+
+struct hlist_node {
+	struct hlist_node *next, **pprev;
+};
+
+struct ustat {
+	__kernel_daddr_t	f_tfree;
+	__kernel_ino_t		f_tinode;
+	char			f_fname[6];
+	char			f_fpack[6];
+};
+
+/**
+ * struct rcu_head - callback structure for use with RCU
+ * @next: next update requests in a list
+ * @func: actual update function to call after the grace period.
+ */
+struct rcu_head {
+	struct rcu_head *next;
+	void (*func)(struct rcu_head *head);
+};
+
+#endif	/* __KERNEL__ */
+#endif /*  __ASSEMBLY__ */
+#endif /* _LINUX_TYPES_H */
diff --git a/include/linux/u64_stats_sync.h b/include/linux/u64_stats_sync.h
new file mode 100644
index 00000000..8da8c4e8
--- /dev/null
+++ b/include/linux/u64_stats_sync.h
@@ -0,0 +1,140 @@
+#ifndef _LINUX_U64_STATS_SYNC_H
+#define _LINUX_U64_STATS_SYNC_H
+
+/*
+ * To properly implement 64bits network statistics on 32bit and 64bit hosts,
+ * we provide a synchronization point, that is a noop on 64bit or UP kernels.
+ *
+ * Key points :
+ * 1) Use a seqcount on SMP 32bits, with low overhead.
+ * 2) Whole thing is a noop on 64bit arches or UP kernels.
+ * 3) Write side must ensure mutual exclusion or one seqcount update could
+ *    be lost, thus blocking readers forever.
+ *    If this synchronization point is not a mutex, but a spinlock or
+ *    spinlock_bh() or disable_bh() :
+ * 3.1) Write side should not sleep.
+ * 3.2) Write side should not allow preemption.
+ * 3.3) If applicable, interrupts should be disabled.
+ *
+ * 4) If reader fetches several counters, there is no guarantee the whole values
+ *    are consistent (remember point 1) : this is a noop on 64bit arches anyway)
+ *
+ * 5) readers are allowed to sleep or be preempted/interrupted : They perform
+ *    pure reads. But if they have to fetch many values, it's better to not allow
+ *    preemptions/interruptions to avoid many retries.
+ *
+ * 6) If counter might be written by an interrupt, readers should block interrupts.
+ *    (On UP, there is no seqcount_t protection, a reader allowing interrupts could
+ *     read partial values)
+ *
+ * 7) For softirq uses, readers can use u64_stats_fetch_begin_bh() and
+ *    u64_stats_fetch_retry_bh() helpers
+ *
+ * Usage :
+ *
+ * Stats producer (writer) should use following template granted it already got
+ * an exclusive access to counters (a lock is already taken, or per cpu
+ * data is used [in a non preemptable context])
+ *
+ *   spin_lock_bh(...) or other synchronization to get exclusive access
+ *   ...
+ *   u64_stats_update_begin(&stats->syncp);
+ *   stats->bytes64 += len; // non atomic operation
+ *   stats->packets64++;    // non atomic operation
+ *   u64_stats_update_end(&stats->syncp);
+ *
+ * While a consumer (reader) should use following template to get consistent
+ * snapshot for each variable (but no guarantee on several ones)
+ *
+ * u64 tbytes, tpackets;
+ * unsigned int start;
+ *
+ * do {
+ *         start = u64_stats_fetch_begin(&stats->syncp);
+ *         tbytes = stats->bytes64; // non atomic operation
+ *         tpackets = stats->packets64; // non atomic operation
+ * } while (u64_stats_fetch_retry(&stats->syncp, start));
+ *
+ *
+ * Example of use in drivers/net/loopback.c, using per_cpu containers,
+ * in BH disabled context.
+ */
+#include <linux/seqlock.h>
+
+struct u64_stats_sync {
+#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
+	seqcount_t	seq;
+#endif
+};
+
+static inline void u64_stats_update_begin(struct u64_stats_sync *syncp)
+{
+#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
+	write_seqcount_begin(&syncp->seq);
+#endif
+}
+
+static inline void u64_stats_update_end(struct u64_stats_sync *syncp)
+{
+#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
+	write_seqcount_end(&syncp->seq);
+#endif
+}
+
+static inline unsigned int u64_stats_fetch_begin(const struct u64_stats_sync *syncp)
+{
+#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
+	return read_seqcount_begin(&syncp->seq);
+#else
+#if BITS_PER_LONG==32
+	preempt_disable();
+#endif
+	return 0;
+#endif
+}
+
+static inline bool u64_stats_fetch_retry(const struct u64_stats_sync *syncp,
+					 unsigned int start)
+{
+#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
+	return read_seqcount_retry(&syncp->seq, start);
+#else
+#if BITS_PER_LONG==32
+	preempt_enable();
+#endif
+	return false;
+#endif
+}
+
+/*
+ * In case softirq handlers can update u64 counters, readers can use following helpers
+ * - SMP 32bit arches use seqcount protection, irq safe.
+ * - UP 32bit must disable BH.
+ * - 64bit have no problem atomically reading u64 values, irq safe.
+ */
+static inline unsigned int u64_stats_fetch_begin_bh(const struct u64_stats_sync *syncp)
+{
+#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
+	return read_seqcount_begin(&syncp->seq);
+#else
+#if BITS_PER_LONG==32
+	local_bh_disable();
+#endif
+	return 0;
+#endif
+}
+
+static inline bool u64_stats_fetch_retry_bh(const struct u64_stats_sync *syncp,
+					 unsigned int start)
+{
+#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
+	return read_seqcount_retry(&syncp->seq, start);
+#else
+#if BITS_PER_LONG==32
+	local_bh_enable();
+#endif
+	return false;
+#endif
+}
+
+#endif /* _LINUX_U64_STATS_SYNC_H */
diff --git a/include/linux/uaccess.h b/include/linux/uaccess.h
new file mode 100644
index 00000000..5ca0951e
--- /dev/null
+++ b/include/linux/uaccess.h
@@ -0,0 +1,111 @@
+#ifndef __LINUX_UACCESS_H__
+#define __LINUX_UACCESS_H__
+
+#include <linux/preempt.h>
+#include <asm/uaccess.h>
+
+/*
+ * These routines enable/disable the pagefault handler in that
+ * it will not take any locks and go straight to the fixup table.
+ *
+ * They have great resemblance to the preempt_disable/enable calls
+ * and in fact they are identical; this is because currently there is
+ * no other way to make the pagefault handlers do this. So we do
+ * disable preemption but we don't necessarily care about that.
+ */
+static inline void pagefault_disable(void)
+{
+	inc_preempt_count();
+	/*
+	 * make sure to have issued the store before a pagefault
+	 * can hit.
+	 */
+	barrier();
+}
+
+static inline void pagefault_enable(void)
+{
+	/*
+	 * make sure to issue those last loads/stores before enabling
+	 * the pagefault handler again.
+	 */
+	barrier();
+	dec_preempt_count();
+	/*
+	 * make sure we do..
+	 */
+	barrier();
+	preempt_check_resched();
+}
+
+#ifndef ARCH_HAS_NOCACHE_UACCESS
+
+static inline unsigned long __copy_from_user_inatomic_nocache(void *to,
+				const void __user *from, unsigned long n)
+{
+	return __copy_from_user_inatomic(to, from, n);
+}
+
+static inline unsigned long __copy_from_user_nocache(void *to,
+				const void __user *from, unsigned long n)
+{
+	return __copy_from_user(to, from, n);
+}
+
+#endif		/* ARCH_HAS_NOCACHE_UACCESS */
+
+/**
+ * probe_kernel_address(): safely attempt to read from a location
+ * @addr: address to read from - its type is type typeof(retval)*
+ * @retval: read into this variable
+ *
+ * Safely read from address @addr into variable @revtal.  If a kernel fault
+ * happens, handle that and return -EFAULT.
+ * We ensure that the __get_user() is executed in atomic context so that
+ * do_page_fault() doesn't attempt to take mmap_sem.  This makes
+ * probe_kernel_address() suitable for use within regions where the caller
+ * already holds mmap_sem, or other locks which nest inside mmap_sem.
+ * This must be a macro because __get_user() needs to know the types of the
+ * args.
+ *
+ * We don't include enough header files to be able to do the set_fs().  We
+ * require that the probe_kernel_address() caller will do that.
+ */
+#define probe_kernel_address(addr, retval)		\
+	({						\
+		long ret;				\
+		mm_segment_t old_fs = get_fs();		\
+							\
+		set_fs(KERNEL_DS);			\
+		pagefault_disable();			\
+		ret = __copy_from_user_inatomic(&(retval), (__force typeof(retval) __user *)(addr), sizeof(retval));		\
+		pagefault_enable();			\
+		set_fs(old_fs);				\
+		ret;					\
+	})
+
+/*
+ * probe_kernel_read(): safely attempt to read from a location
+ * @dst: pointer to the buffer that shall take the data
+ * @src: address to read from
+ * @size: size of the data chunk
+ *
+ * Safely read from address @src to the buffer at @dst.  If a kernel fault
+ * happens, handle that and return -EFAULT.
+ */
+extern long probe_kernel_read(void *dst, const void *src, size_t size);
+extern long __probe_kernel_read(void *dst, const void *src, size_t size);
+
+/*
+ * probe_kernel_write(): safely attempt to write to a location
+ * @dst: address to write to
+ * @src: pointer to the data that shall be written
+ * @size: size of the data chunk
+ *
+ * Safely write to address @dst from the buffer at @src.  If a kernel fault
+ * happens, handle that and return -EFAULT.
+ */
+extern long notrace probe_kernel_write(void *dst, const void *src, size_t size);
+extern long notrace __probe_kernel_write(void *dst, const void *src, size_t size);
+
+#endif		/* __LINUX_UACCESS_H__ */
diff --git a/include/linux/ucb1400.h b/include/linux/ucb1400.h
new file mode 100644
index 00000000..d21b33c4
--- /dev/null
+++ b/include/linux/ucb1400.h
@@ -0,0 +1,171 @@
+/*
+ * Register definitions and functions for:
+ *  Philips UCB1400 driver
+ *
+ * Based on ucb1400_ts:
+ *  Author:	Nicolas Pitre
+ *  Created:	September 25, 2006
+ *  Copyright:	MontaVista Software, Inc.
+ *
+ * Spliting done by: Marek Vasut <marek.vasut@gmail.com>
+ * If something doesn't work and it worked before spliting, e-mail me,
+ * dont bother Nicolas please ;-)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This code is heavily based on ucb1x00-*.c copyrighted by Russell King
+ * covering the UCB1100, UCB1200 and UCB1300..  Support for the UCB1400 has
+ * been made separate from ucb1x00-core/ucb1x00-ts on Russell's request.
+ */
+
+#ifndef _LINUX__UCB1400_H
+#define _LINUX__UCB1400_H
+
+#include <sound/ac97_codec.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+/*
+ * UCB1400 AC-link registers
+ */
+
+#define UCB_IO_DATA		0x5a
+#define UCB_IO_DIR		0x5c
+#define UCB_IE_RIS		0x5e
+#define UCB_IE_FAL		0x60
+#define UCB_IE_STATUS		0x62
+#define UCB_IE_CLEAR		0x62
+#define UCB_IE_ADC		(1 << 11)
+#define UCB_IE_TSPX		(1 << 12)
+
+#define UCB_TS_CR		0x64
+#define UCB_TS_CR_TSMX_POW	(1 << 0)
+#define UCB_TS_CR_TSPX_POW	(1 << 1)
+#define UCB_TS_CR_TSMY_POW	(1 << 2)
+#define UCB_TS_CR_TSPY_POW	(1 << 3)
+#define UCB_TS_CR_TSMX_GND	(1 << 4)
+#define UCB_TS_CR_TSPX_GND	(1 << 5)
+#define UCB_TS_CR_TSMY_GND	(1 << 6)
+#define UCB_TS_CR_TSPY_GND	(1 << 7)
+#define UCB_TS_CR_MODE_INT	(0 << 8)
+#define UCB_TS_CR_MODE_PRES	(1 << 8)
+#define UCB_TS_CR_MODE_POS	(2 << 8)
+#define UCB_TS_CR_BIAS_ENA	(1 << 11)
+#define UCB_TS_CR_TSPX_LOW	(1 << 12)
+#define UCB_TS_CR_TSMX_LOW	(1 << 13)
+
+#define UCB_ADC_CR		0x66
+#define UCB_ADC_SYNC_ENA	(1 << 0)
+#define UCB_ADC_VREFBYP_CON	(1 << 1)
+#define UCB_ADC_INP_TSPX	(0 << 2)
+#define UCB_ADC_INP_TSMX	(1 << 2)
+#define UCB_ADC_INP_TSPY	(2 << 2)
+#define UCB_ADC_INP_TSMY	(3 << 2)
+#define UCB_ADC_INP_AD0		(4 << 2)
+#define UCB_ADC_INP_AD1		(5 << 2)
+#define UCB_ADC_INP_AD2		(6 << 2)
+#define UCB_ADC_INP_AD3		(7 << 2)
+#define UCB_ADC_EXT_REF		(1 << 5)
+#define UCB_ADC_START		(1 << 7)
+#define UCB_ADC_ENA		(1 << 15)
+
+#define UCB_ADC_DATA		0x68
+#define UCB_ADC_DAT_VALID	(1 << 15)
+
+#define UCB_FCSR		0x6c
+#define UCB_FCSR_AVE		(1 << 12)
+
+#define UCB_ADC_DAT_MASK	0x3ff
+
+#define UCB_ID			0x7e
+#define UCB_ID_1400             0x4304
+
+struct ucb1400_gpio_data {
+	int gpio_offset;
+	int (*gpio_setup)(struct device *dev, int ngpio);
+	int (*gpio_teardown)(struct device *dev, int ngpio);
+};
+
+struct ucb1400_gpio {
+	struct gpio_chip	gc;
+	struct snd_ac97		*ac97;
+};
+
+struct ucb1400_ts {
+	struct input_dev	*ts_idev;
+	int			id;
+	int			irq;
+	struct snd_ac97		*ac97;
+	wait_queue_head_t	ts_wait;
+	bool			stopped;
+};
+
+struct ucb1400 {
+	struct platform_device	*ucb1400_ts;
+	struct platform_device	*ucb1400_gpio;
+};
+
+struct ucb1400_pdata {
+	int	irq;
+};
+
+static inline u16 ucb1400_reg_read(struct snd_ac97 *ac97, u16 reg)
+{
+	return ac97->bus->ops->read(ac97, reg);
+}
+
+static inline void ucb1400_reg_write(struct snd_ac97 *ac97, u16 reg, u16 val)
+{
+	ac97->bus->ops->write(ac97, reg, val);
+}
+
+static inline u16 ucb1400_gpio_get_value(struct snd_ac97 *ac97, u16 gpio)
+{
+	return ucb1400_reg_read(ac97, UCB_IO_DATA) & (1 << gpio);
+}
+
+static inline void ucb1400_gpio_set_value(struct snd_ac97 *ac97, u16 gpio,
+						u16 val)
+{
+	ucb1400_reg_write(ac97, UCB_IO_DATA, val ?
+			ucb1400_reg_read(ac97, UCB_IO_DATA) | (1 << gpio) :
+			ucb1400_reg_read(ac97, UCB_IO_DATA) & ~(1 << gpio));
+}
+
+static inline u16 ucb1400_gpio_get_direction(struct snd_ac97 *ac97, u16 gpio)
+{
+	return ucb1400_reg_read(ac97, UCB_IO_DIR) & (1 << gpio);
+}
+
+static inline void ucb1400_gpio_set_direction(struct snd_ac97 *ac97, u16 gpio,
+						u16 dir)
+{
+	ucb1400_reg_write(ac97, UCB_IO_DIR, dir ?
+			ucb1400_reg_read(ac97, UCB_IO_DIR) | (1 << gpio) :
+			ucb1400_reg_read(ac97, UCB_IO_DIR) & ~(1 << gpio));
+}
+
+static inline void ucb1400_adc_enable(struct snd_ac97 *ac97)
+{
+	ucb1400_reg_write(ac97, UCB_ADC_CR, UCB_ADC_ENA);
+}
+
+static inline void ucb1400_adc_disable(struct snd_ac97 *ac97)
+{
+	ucb1400_reg_write(ac97, UCB_ADC_CR, 0);
+}
+
+
+unsigned int ucb1400_adc_read(struct snd_ac97 *ac97, u16 adc_channel,
+			      int adcsync);
+
+#ifdef CONFIG_GPIO_UCB1400
+void __init ucb1400_gpio_set_data(struct ucb1400_gpio_data *data);
+#else
+static inline void ucb1400_gpio_set_data(struct ucb1400_gpio_data *data) {}
+#endif
+
+#endif
diff --git a/include/linux/udf_fs_i.h b/include/linux/udf_fs_i.h
new file mode 100644
index 00000000..35369659
--- /dev/null
+++ b/include/linux/udf_fs_i.h
@@ -0,0 +1,21 @@
+/*
+ * udf_fs_i.h
+ *
+ * This file is intended for the Linux kernel/module. 
+ *
+ * COPYRIGHT
+ *	This file is distributed under the terms of the GNU General Public
+ *	License (GPL). Copies of the GPL can be obtained from:
+ *		ftp://prep.ai.mit.edu/pub/gnu/GPL
+ *	Each contributing author retains all rights to their own work.
+ */
+#ifndef _UDF_FS_I_H
+#define _UDF_FS_I_H 1
+
+/* exported IOCTLs, we have 'l', 0x40-0x7f */
+#define UDF_GETEASIZE   _IOR('l', 0x40, int)
+#define UDF_GETEABLOCK  _IOR('l', 0x41, void *)
+#define UDF_GETVOLIDENT _IOR('l', 0x42, void *)
+#define UDF_RELOCATE_BLOCKS _IOWR('l', 0x43, long)
+
+#endif /* _UDF_FS_I_H */
diff --git a/include/linux/udp.h b/include/linux/udp.h
new file mode 100644
index 00000000..03f72a2b
--- /dev/null
+++ b/include/linux/udp.h
@@ -0,0 +1,101 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the UDP protocol.
+ *
+ * Version:	@(#)udp.h	1.0.2	04/28/93
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_UDP_H
+#define _LINUX_UDP_H
+
+#include <linux/types.h>
+
+struct udphdr {
+	__be16	source;
+	__be16	dest;
+	__be16	len;
+	__sum16	check;
+};
+
+/* UDP socket options */
+#define UDP_CORK	1	/* Never send partially complete segments */
+#define UDP_ENCAP	100	/* Set the socket to accept encapsulated packets */
+
+/* UDP encapsulation types */
+#define UDP_ENCAP_ESPINUDP_NON_IKE	1 /* draft-ietf-ipsec-nat-t-ike-00/01 */
+#define UDP_ENCAP_ESPINUDP	2 /* draft-ietf-ipsec-udp-encaps-06 */
+#define UDP_ENCAP_L2TPINUDP	3 /* rfc2661 */
+
+#ifdef __KERNEL__
+#include <net/inet_sock.h>
+#include <linux/skbuff.h>
+#include <net/netns/hash.h>
+
+static inline struct udphdr *udp_hdr(const struct sk_buff *skb)
+{
+	return (struct udphdr *)skb_transport_header(skb);
+}
+
+#define UDP_HTABLE_SIZE_MIN		(CONFIG_BASE_SMALL ? 128 : 256)
+
+static inline int udp_hashfn(struct net *net, unsigned num, unsigned mask)
+{
+	return (num + net_hash_mix(net)) & mask;
+}
+
+struct udp_sock {
+	/* inet_sock has to be the first member */
+	struct inet_sock inet;
+#define udp_port_hash		inet.sk.__sk_common.skc_u16hashes[0]
+#define udp_portaddr_hash	inet.sk.__sk_common.skc_u16hashes[1]
+#define udp_portaddr_node	inet.sk.__sk_common.skc_portaddr_node
+	int		 pending;	/* Any pending frames ? */
+	unsigned int	 corkflag;	/* Cork is required */
+  	__u16		 encap_type;	/* Is this an Encapsulation socket? */
+	/*
+	 * Following member retains the information to create a UDP header
+	 * when the socket is uncorked.
+	 */
+	__u16		 len;		/* total length of pending frames */
+	/*
+	 * Fields specific to UDP-Lite.
+	 */
+	__u16		 pcslen;
+	__u16		 pcrlen;
+/* indicator bits used by pcflag: */
+#define UDPLITE_BIT      0x1  		/* set by udplite proto init function */
+#define UDPLITE_SEND_CC  0x2  		/* set via udplite setsockopt         */
+#define UDPLITE_RECV_CC  0x4		/* set via udplite setsocktopt        */
+	__u8		 pcflag;        /* marks socket as UDP-Lite if > 0    */
+	__u8		 unused[3];
+	/*
+	 * For encapsulation sockets.
+	 */
+	int (*encap_rcv)(struct sock *sk, struct sk_buff *skb);
+};
+
+static inline struct udp_sock *udp_sk(const struct sock *sk)
+{
+	return (struct udp_sock *)sk;
+}
+
+#define udp_portaddr_for_each_entry(__sk, node, list) \
+	hlist_nulls_for_each_entry(__sk, node, list, __sk_common.skc_portaddr_node)
+
+#define udp_portaddr_for_each_entry_rcu(__sk, node, list) \
+	hlist_nulls_for_each_entry_rcu(__sk, node, list, __sk_common.skc_portaddr_node)
+
+#define IS_UDPLITE(__sk) (udp_sk(__sk)->pcflag)
+
+#endif
+
+#endif	/* _LINUX_UDP_H */
diff --git a/include/linux/uhid.h b/include/linux/uhid.h
new file mode 100644
index 00000000..9c6974f1
--- /dev/null
+++ b/include/linux/uhid.h
@@ -0,0 +1,104 @@
+#ifndef __UHID_H_
+#define __UHID_H_
+
+/*
+ * User-space I/O driver support for HID subsystem
+ * Copyright (c) 2012 David Herrmann
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+/*
+ * Public header for user-space communication. We try to keep every structure
+ * aligned but to be safe we also use __attribute__((__packed__)). Therefore,
+ * the communication should be ABI compatible even between architectures.
+ */
+
+#include <linux/input.h>
+#include <linux/types.h>
+
+enum uhid_event_type {
+	UHID_CREATE,
+	UHID_DESTROY,
+	UHID_START,
+	UHID_STOP,
+	UHID_OPEN,
+	UHID_CLOSE,
+	UHID_OUTPUT,
+	UHID_OUTPUT_EV,
+	UHID_INPUT,
+	UHID_FEATURE,
+	UHID_FEATURE_ANSWER,
+};
+
+struct uhid_create_req {
+	__u8 name[128];
+	__u8 phys[64];
+	__u8 uniq[64];
+	__u8 __user *rd_data;
+	__u16 rd_size;
+
+	__u16 bus;
+	__u32 vendor;
+	__u32 product;
+	__u32 version;
+	__u32 country;
+} __attribute__((__packed__));
+
+#define UHID_DATA_MAX 4096
+
+enum uhid_report_type {
+	UHID_FEATURE_REPORT,
+	UHID_OUTPUT_REPORT,
+	UHID_INPUT_REPORT,
+};
+
+struct uhid_input_req {
+	__u8 data[UHID_DATA_MAX];
+	__u16 size;
+} __attribute__((__packed__));
+
+struct uhid_output_req {
+	__u8 data[UHID_DATA_MAX];
+	__u16 size;
+	__u8 rtype;
+} __attribute__((__packed__));
+
+struct uhid_output_ev_req {
+	__u16 type;
+	__u16 code;
+	__s32 value;
+} __attribute__((__packed__));
+
+struct uhid_feature_req {
+	__u32 id;
+	__u8 rnum;
+	__u8 rtype;
+} __attribute__((__packed__));
+
+struct uhid_feature_answer_req {
+	__u32 id;
+	__u16 err;
+	__u16 size;
+	__u8 data[UHID_DATA_MAX];
+};
+
+struct uhid_event {
+	__u32 type;
+
+	union {
+		struct uhid_create_req create;
+		struct uhid_input_req input;
+		struct uhid_output_req output;
+		struct uhid_output_ev_req output_ev;
+		struct uhid_feature_req feature;
+		struct uhid_feature_answer_req feature_answer;
+	} u;
+} __attribute__((__packed__));
+
+#endif /* __UHID_H_ */
diff --git a/include/linux/uid_stat.h b/include/linux/uid_stat.h
new file mode 100644
index 00000000..6bd6c4e5
--- /dev/null
+++ b/include/linux/uid_stat.h
@@ -0,0 +1,29 @@
+/* include/linux/uid_stat.h
+ *
+ * Copyright (C) 2008-2009 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __uid_stat_h
+#define __uid_stat_h
+
+/* Contains definitions for resource tracking per uid. */
+
+#ifdef CONFIG_UID_STAT
+int uid_stat_tcp_snd(uid_t uid, int size);
+int uid_stat_tcp_rcv(uid_t uid, int size);
+#else
+#define uid_stat_tcp_snd(uid, size) do {} while (0);
+#define uid_stat_tcp_rcv(uid, size) do {} while (0);
+#endif
+
+#endif /* _LINUX_UID_STAT_H */
diff --git a/include/linux/uinput.h b/include/linux/uinput.h
new file mode 100644
index 00000000..2aa2881b
--- /dev/null
+++ b/include/linux/uinput.h
@@ -0,0 +1,176 @@
+#ifndef __UINPUT_H_
+#define __UINPUT_H_
+/*
+ *  User level driver support for input subsystem
+ *
+ * Heavily based on evdev.c by Vojtech Pavlik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org>
+ *
+ * Changes/Revisions:
+ *	0.3	24/05/2006 (Anssi Hannula <anssi.hannulagmail.com>)
+ *		- update ff support for the changes in kernel interface
+ *		- add UINPUT_VERSION
+ *	0.2	16/10/2004 (Micah Dowty <micah@navi.cx>)
+ *		- added force feedback support
+ *             - added UI_SET_PHYS
+ *	0.1	20/06/2002
+ *		- first public version
+ */
+
+#include <linux/input.h>
+
+#define UINPUT_VERSION		3
+
+#ifdef __KERNEL__
+#define UINPUT_NAME		"uinput"
+#define UINPUT_BUFFER_SIZE	16
+#define UINPUT_NUM_REQUESTS	16
+
+enum uinput_state { UIST_NEW_DEVICE, UIST_SETUP_COMPLETE, UIST_CREATED };
+
+struct uinput_request {
+	int			id;
+	int			code;	/* UI_FF_UPLOAD, UI_FF_ERASE */
+
+	int			retval;
+	struct completion	done;
+
+	union {
+		int		effect_id;
+		struct {
+			struct ff_effect *effect;
+			struct ff_effect *old;
+		} upload;
+	} u;
+};
+
+struct uinput_device {
+	struct input_dev	*dev;
+	struct mutex		mutex;
+	enum uinput_state	state;
+	wait_queue_head_t	waitq;
+	unsigned char		ready;
+	unsigned char		head;
+	unsigned char		tail;
+	struct input_event	buff[UINPUT_BUFFER_SIZE];
+	unsigned int		ff_effects_max;
+
+	struct uinput_request	*requests[UINPUT_NUM_REQUESTS];
+	wait_queue_head_t	requests_waitq;
+	spinlock_t		requests_lock;
+};
+#endif	/* __KERNEL__ */
+
+struct uinput_ff_upload {
+	int			request_id;
+	int			retval;
+	struct ff_effect	effect;
+	struct ff_effect	old;
+};
+
+struct uinput_ff_erase {
+	int			request_id;
+	int			retval;
+	int			effect_id;
+};
+
+/* ioctl */
+#define UINPUT_IOCTL_BASE	'U'
+#define UI_DEV_CREATE		_IO(UINPUT_IOCTL_BASE, 1)
+#define UI_DEV_DESTROY		_IO(UINPUT_IOCTL_BASE, 2)
+
+#define UI_SET_EVBIT		_IOW(UINPUT_IOCTL_BASE, 100, int)
+#define UI_SET_KEYBIT		_IOW(UINPUT_IOCTL_BASE, 101, int)
+#define UI_SET_RELBIT		_IOW(UINPUT_IOCTL_BASE, 102, int)
+#define UI_SET_ABSBIT		_IOW(UINPUT_IOCTL_BASE, 103, int)
+#define UI_SET_MSCBIT		_IOW(UINPUT_IOCTL_BASE, 104, int)
+#define UI_SET_LEDBIT		_IOW(UINPUT_IOCTL_BASE, 105, int)
+#define UI_SET_SNDBIT		_IOW(UINPUT_IOCTL_BASE, 106, int)
+#define UI_SET_FFBIT		_IOW(UINPUT_IOCTL_BASE, 107, int)
+#define UI_SET_PHYS		_IOW(UINPUT_IOCTL_BASE, 108, char*)
+#define UI_SET_SWBIT		_IOW(UINPUT_IOCTL_BASE, 109, int)
+#define UI_SET_PROPBIT		_IOW(UINPUT_IOCTL_BASE, 110, int)
+
+#define UI_BEGIN_FF_UPLOAD	_IOWR(UINPUT_IOCTL_BASE, 200, struct uinput_ff_upload)
+#define UI_END_FF_UPLOAD	_IOW(UINPUT_IOCTL_BASE, 201, struct uinput_ff_upload)
+#define UI_BEGIN_FF_ERASE	_IOWR(UINPUT_IOCTL_BASE, 202, struct uinput_ff_erase)
+#define UI_END_FF_ERASE		_IOW(UINPUT_IOCTL_BASE, 203, struct uinput_ff_erase)
+
+/*
+ * To write a force-feedback-capable driver, the upload_effect
+ * and erase_effect callbacks in input_dev must be implemented.
+ * The uinput driver will generate a fake input event when one of
+ * these callbacks are invoked. The userspace code then uses
+ * ioctls to retrieve additional parameters and send the return code.
+ * The callback blocks until this return code is sent.
+ *
+ * The described callback mechanism is only used if ff_effects_max
+ * is set.
+ *
+ * To implement upload_effect():
+ *   1. Wait for an event with type == EV_UINPUT and code == UI_FF_UPLOAD.
+ *      A request ID will be given in 'value'.
+ *   2. Allocate a uinput_ff_upload struct, fill in request_id with
+ *      the 'value' from the EV_UINPUT event.
+ *   3. Issue a UI_BEGIN_FF_UPLOAD ioctl, giving it the
+ *      uinput_ff_upload struct. It will be filled in with the
+ *      ff_effects passed to upload_effect().
+ *   4. Perform the effect upload, and place a return code back into
+        the uinput_ff_upload struct.
+ *   5. Issue a UI_END_FF_UPLOAD ioctl, also giving it the
+ *      uinput_ff_upload_effect struct. This will complete execution
+ *      of our upload_effect() handler.
+ *
+ * To implement erase_effect():
+ *   1. Wait for an event with type == EV_UINPUT and code == UI_FF_ERASE.
+ *      A request ID will be given in 'value'.
+ *   2. Allocate a uinput_ff_erase struct, fill in request_id with
+ *      the 'value' from the EV_UINPUT event.
+ *   3. Issue a UI_BEGIN_FF_ERASE ioctl, giving it the
+ *      uinput_ff_erase struct. It will be filled in with the
+ *      effect ID passed to erase_effect().
+ *   4. Perform the effect erasure, and place a return code back
+ *      into the uinput_ff_erase struct.
+ *   5. Issue a UI_END_FF_ERASE ioctl, also giving it the
+ *      uinput_ff_erase_effect struct. This will complete execution
+ *      of our erase_effect() handler.
+ */
+
+/*
+ * This is the new event type, used only by uinput.
+ * 'code' is UI_FF_UPLOAD or UI_FF_ERASE, and 'value'
+ * is the unique request ID. This number was picked
+ * arbitrarily, above EV_MAX (since the input system
+ * never sees it) but in the range of a 16-bit int.
+ */
+#define EV_UINPUT		0x0101
+#define UI_FF_UPLOAD		1
+#define UI_FF_ERASE		2
+
+#define UINPUT_MAX_NAME_SIZE	80
+struct uinput_user_dev {
+	char name[UINPUT_MAX_NAME_SIZE];
+	struct input_id id;
+	int ff_effects_max;
+	int absmax[ABS_CNT];
+	int absmin[ABS_CNT];
+	int absfuzz[ABS_CNT];
+	int absflat[ABS_CNT];
+};
+#endif	/* __UINPUT_H_ */
+
diff --git a/include/linux/uio.h b/include/linux/uio.h
new file mode 100644
index 00000000..98c11432
--- /dev/null
+++ b/include/linux/uio.h
@@ -0,0 +1,56 @@
+#ifndef __LINUX_UIO_H
+#define __LINUX_UIO_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+/*
+ *	Berkeley style UIO structures	-	Alan Cox 1994.
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+struct iovec
+{
+	void __user *iov_base;	/* BSD uses caddr_t (1003.1g requires void *) */
+	__kernel_size_t iov_len; /* Must be size_t (1003.1g) */
+};
+
+/*
+ *	UIO_MAXIOV shall be at least 16 1003.1g (5.4.1.1)
+ */
+ 
+#define UIO_FASTIOV	8
+#define UIO_MAXIOV	1024
+
+#ifdef __KERNEL__
+
+struct kvec {
+	void *iov_base; /* and that should *never* hold a userland pointer */
+	size_t iov_len;
+};
+
+/*
+ * Total number of bytes covered by an iovec.
+ *
+ * NOTE that it is not safe to use this function until all the iovec's
+ * segment lengths have been validated.  Because the individual lengths can
+ * overflow a size_t when added together.
+ */
+static inline size_t iov_length(const struct iovec *iov, unsigned long nr_segs)
+{
+	unsigned long seg;
+	size_t ret = 0;
+
+	for (seg = 0; seg < nr_segs; seg++)
+		ret += iov[seg].iov_len;
+	return ret;
+}
+
+unsigned long iov_shorten(struct iovec *iov, unsigned long nr_segs, size_t to);
+#endif
+
+#endif
diff --git a/include/linux/uio_driver.h b/include/linux/uio_driver.h
new file mode 100644
index 00000000..1ad47244
--- /dev/null
+++ b/include/linux/uio_driver.h
@@ -0,0 +1,128 @@
+/*
+ * include/linux/uio_driver.h
+ *
+ * Copyright(C) 2005, Benedikt Spranger <b.spranger@linutronix.de>
+ * Copyright(C) 2005, Thomas Gleixner <tglx@linutronix.de>
+ * Copyright(C) 2006, Hans J. Koch <hjk@hansjkoch.de>
+ * Copyright(C) 2006, Greg Kroah-Hartman <greg@kroah.com>
+ *
+ * Userspace IO driver.
+ *
+ * Licensed under the GPLv2 only.
+ */
+
+#ifndef _UIO_DRIVER_H_
+#define _UIO_DRIVER_H_
+
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+
+struct module;
+struct uio_map;
+
+/**
+ * struct uio_mem - description of a UIO memory region
+ * @name:		name of the memory region for identification
+ * @addr:		address of the device's memory (phys_addr is used since
+ * 			addr can be logical, virtual, or physical & phys_addr_t
+ * 			should always be large enough to handle any of the
+ * 			address types)
+ * @size:		size of IO
+ * @memtype:		type of memory addr points to
+ * @internal_addr:	ioremap-ped version of addr, for driver internal use
+ * @map:		for use by the UIO core only.
+ */
+struct uio_mem {
+	const char		*name;
+	phys_addr_t		addr;
+	unsigned long		size;
+	int			memtype;
+	void __iomem		*internal_addr;
+	struct uio_map		*map;
+};
+
+#define MAX_UIO_MAPS	5
+
+struct uio_portio;
+
+/**
+ * struct uio_port - description of a UIO port region
+ * @name:		name of the port region for identification
+ * @start:		start of port region
+ * @size:		size of port region
+ * @porttype:		type of port (see UIO_PORT_* below)
+ * @portio:		for use by the UIO core only.
+ */
+struct uio_port {
+	const char		*name;
+	unsigned long		start;
+	unsigned long		size;
+	int			porttype;
+	struct uio_portio	*portio;
+};
+
+#define MAX_UIO_PORT_REGIONS	5
+
+struct uio_device;
+
+/**
+ * struct uio_info - UIO device capabilities
+ * @uio_dev:		the UIO device this info belongs to
+ * @name:		device name
+ * @version:		device driver version
+ * @mem:		list of mappable memory regions, size==0 for end of list
+ * @port:		list of port regions, size==0 for end of list
+ * @irq:		interrupt number or UIO_IRQ_CUSTOM
+ * @irq_flags:		flags for request_irq()
+ * @priv:		optional private data
+ * @handler:		the device's irq handler
+ * @mmap:		mmap operation for this uio device
+ * @open:		open operation for this uio device
+ * @release:		release operation for this uio device
+ * @irqcontrol:		disable/enable irqs when 0/1 is written to /dev/uioX
+ */
+struct uio_info {
+	struct uio_device	*uio_dev;
+	const char		*name;
+	const char		*version;
+	struct uio_mem		mem[MAX_UIO_MAPS];
+	struct uio_port		port[MAX_UIO_PORT_REGIONS];
+	long			irq;
+	unsigned long		irq_flags;
+	void			*priv;
+	irqreturn_t (*handler)(int irq, struct uio_info *dev_info);
+	int (*mmap)(struct uio_info *info, struct vm_area_struct *vma);
+	int (*open)(struct uio_info *info, struct inode *inode);
+	int (*release)(struct uio_info *info, struct inode *inode);
+	int (*irqcontrol)(struct uio_info *info, s32 irq_on);
+};
+
+extern int __must_check
+	__uio_register_device(struct module *owner,
+			      struct device *parent,
+			      struct uio_info *info);
+
+/* use a define to avoid include chaining to get THIS_MODULE */
+#define uio_register_device(parent, info) \
+	__uio_register_device(THIS_MODULE, parent, info)
+
+extern void uio_unregister_device(struct uio_info *info);
+extern void uio_event_notify(struct uio_info *info);
+
+/* defines for uio_info->irq */
+#define UIO_IRQ_CUSTOM	-1
+#define UIO_IRQ_NONE	0
+
+/* defines for uio_mem->memtype */
+#define UIO_MEM_NONE	0
+#define UIO_MEM_PHYS	1
+#define UIO_MEM_LOGICAL	2
+#define UIO_MEM_VIRTUAL 3
+
+/* defines for uio_port->porttype */
+#define UIO_PORT_NONE	0
+#define UIO_PORT_X86	1
+#define UIO_PORT_GPIO	2
+#define UIO_PORT_OTHER	3
+
+#endif /* _LINUX_UIO_DRIVER_H_ */
diff --git a/include/linux/ultrasound.h b/include/linux/ultrasound.h
new file mode 100644
index 00000000..71339dc5
--- /dev/null
+++ b/include/linux/ultrasound.h
@@ -0,0 +1,103 @@
+#ifndef _ULTRASOUND_H_
+#define _ULTRASOUND_H_
+/*
+ *	ultrasound.h - Macros for programming the Gravis Ultrasound
+ *			These macros are extremely device dependent
+ *			and not portable.
+ */
+/*
+ * Copyright (C) by Hannu Savolainen 1993-1997
+ *
+ * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
+ * Version 2 (June 1991). See the "COPYING" file distributed with this software
+ * for more info.
+ */
+
+
+/*
+ *	Private events for Gravis Ultrasound (GUS)
+ *
+ *	Format:
+ *		byte 0 		- SEQ_PRIVATE (0xfe)
+ *		byte 1 		- Synthesizer device number (0-N)
+ *		byte 2 		- Command (see below)
+ *		byte 3 		- Voice number (0-31)
+ *		bytes 4 and 5	- parameter P1 (unsigned short)
+ *		bytes 6 and 7	- parameter P2 (unsigned short)
+ *
+ *	Commands:
+ *		Each command affects one voice defined in byte 3.
+ *		Unused parameters (P1 and/or P2 *MUST* be initialized to zero).
+ *		_GUS_NUMVOICES	- Sets max. number of concurrent voices (P1=14-31, default 16)
+ *		_GUS_VOICESAMPLE- ************ OBSOLETE *************
+ *		_GUS_VOICEON	- Starts voice (P1=voice mode)
+ *		_GUS_VOICEOFF	- Stops voice (no parameters)
+ *		_GUS_VOICEFADE	- Stops the voice smoothly.
+ *		_GUS_VOICEMODE	- Alters the voice mode, don't start or stop voice (P1=voice mode)
+ *		_GUS_VOICEBALA	- Sets voice balance (P1, 0=left, 7=middle and 15=right, default 7)
+ *		_GUS_VOICEFREQ	- Sets voice (sample) playback frequency (P1=Hz)
+ *		_GUS_VOICEVOL	- Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
+ *		_GUS_VOICEVOL2	- Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
+ *				  (Like GUS_VOICEVOL but doesn't change the hw
+ *				  volume. It just updates volume in the voice table).
+ *
+ *		_GUS_RAMPRANGE	- Sets limits for volume ramping (P1=low volume, P2=high volume)
+ *		_GUS_RAMPRATE	- Sets the speed for volume ramping (P1=scale, P2=rate)
+ *		_GUS_RAMPMODE	- Sets the volume ramping mode (P1=ramping mode)
+ *		_GUS_RAMPON	- Starts volume ramping (no parameters)
+ *		_GUS_RAMPOFF	- Stops volume ramping (no parameters)
+ *		_GUS_VOLUME_SCALE - Changes the volume calculation constants
+ *				  for all voices.
+ */
+
+#define _GUS_NUMVOICES		0x00
+#define _GUS_VOICESAMPLE	0x01	/* OBSOLETE */
+#define _GUS_VOICEON		0x02
+#define _GUS_VOICEOFF		0x03
+#define _GUS_VOICEMODE		0x04
+#define _GUS_VOICEBALA		0x05
+#define _GUS_VOICEFREQ		0x06
+#define _GUS_VOICEVOL		0x07
+#define _GUS_RAMPRANGE		0x08
+#define _GUS_RAMPRATE		0x09
+#define _GUS_RAMPMODE		0x0a
+#define _GUS_RAMPON		0x0b
+#define _GUS_RAMPOFF		0x0c
+#define _GUS_VOICEFADE		0x0d
+#define _GUS_VOLUME_SCALE	0x0e
+#define _GUS_VOICEVOL2		0x0f
+#define _GUS_VOICE_POS		0x10
+
+/*
+ *	GUS API macros
+ */
+
+#define _GUS_CMD(chn, voice, cmd, p1, p2) \
+					{_SEQ_NEEDBUF(8); _seqbuf[_seqbufptr] = SEQ_PRIVATE;\
+					_seqbuf[_seqbufptr+1] = (chn); _seqbuf[_seqbufptr+2] = cmd;\
+					_seqbuf[_seqbufptr+3] = voice;\
+					*(unsigned short*)&_seqbuf[_seqbufptr+4] = p1;\
+					*(unsigned short*)&_seqbuf[_seqbufptr+6] = p2;\
+					_SEQ_ADVBUF(8);}
+
+#define GUS_NUMVOICES(chn, p1)			_GUS_CMD(chn, 0, _GUS_NUMVOICES, (p1), 0)
+#define GUS_VOICESAMPLE(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICESAMPLE, (p1), 0)	/* OBSOLETE */
+#define GUS_VOICEON(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEON, (p1), 0)
+#define GUS_VOICEOFF(chn, voice)		_GUS_CMD(chn, voice, _GUS_VOICEOFF, 0, 0)
+#define GUS_VOICEFADE(chn, voice)		_GUS_CMD(chn, voice, _GUS_VOICEFADE, 0, 0)
+#define GUS_VOICEMODE(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEMODE, (p1), 0)
+#define GUS_VOICEBALA(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEBALA, (p1), 0)
+#define GUS_VOICEFREQ(chn, voice, p)		_GUS_CMD(chn, voice, _GUS_VOICEFREQ, \
+							(p) & 0xffff, ((p) >> 16) & 0xffff)
+#define GUS_VOICEVOL(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEVOL, (p1), 0)
+#define GUS_VOICEVOL2(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEVOL2, (p1), 0)
+#define GUS_RAMPRANGE(chn, voice, low, high)	_GUS_CMD(chn, voice, _GUS_RAMPRANGE, (low), (high))
+#define GUS_RAMPRATE(chn, voice, p1, p2)	_GUS_CMD(chn, voice, _GUS_RAMPRATE, (p1), (p2))
+#define GUS_RAMPMODE(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_RAMPMODE, (p1), 0)
+#define GUS_RAMPON(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_RAMPON, (p1), 0)
+#define GUS_RAMPOFF(chn, voice)			_GUS_CMD(chn, voice, _GUS_RAMPOFF, 0, 0)
+#define GUS_VOLUME_SCALE(chn, voice, p1, p2)	_GUS_CMD(chn, voice, _GUS_VOLUME_SCALE, (p1), (p2))
+#define GUS_VOICE_POS(chn, voice, p)		_GUS_CMD(chn, voice, _GUS_VOICE_POS, \
+							(p) & 0xffff, ((p) >> 16) & 0xffff)
+
+#endif
diff --git a/include/linux/un.h b/include/linux/un.h
new file mode 100644
index 00000000..3ed3e46c
--- /dev/null
+++ b/include/linux/un.h
@@ -0,0 +1,13 @@
+#ifndef _LINUX_UN_H
+#define _LINUX_UN_H
+
+#include <linux/socket.h>
+
+#define UNIX_PATH_MAX	108
+
+struct sockaddr_un {
+	__kernel_sa_family_t sun_family; /* AF_UNIX */
+	char sun_path[UNIX_PATH_MAX];	/* pathname */
+};
+
+#endif /* _LINUX_UN_H */
diff --git a/include/linux/unaligned/access_ok.h b/include/linux/unaligned/access_ok.h
new file mode 100644
index 00000000..99c1b4d2
--- /dev/null
+++ b/include/linux/unaligned/access_ok.h
@@ -0,0 +1,67 @@
+#ifndef _LINUX_UNALIGNED_ACCESS_OK_H
+#define _LINUX_UNALIGNED_ACCESS_OK_H
+
+#include <linux/kernel.h>
+#include <asm/byteorder.h>
+
+static inline u16 get_unaligned_le16(const void *p)
+{
+	return le16_to_cpup((__le16 *)p);
+}
+
+static inline u32 get_unaligned_le32(const void *p)
+{
+	return le32_to_cpup((__le32 *)p);
+}
+
+static inline u64 get_unaligned_le64(const void *p)
+{
+	return le64_to_cpup((__le64 *)p);
+}
+
+static inline u16 get_unaligned_be16(const void *p)
+{
+	return be16_to_cpup((__be16 *)p);
+}
+
+static inline u32 get_unaligned_be32(const void *p)
+{
+	return be32_to_cpup((__be32 *)p);
+}
+
+static inline u64 get_unaligned_be64(const void *p)
+{
+	return be64_to_cpup((__be64 *)p);
+}
+
+static inline void put_unaligned_le16(u16 val, void *p)
+{
+	*((__le16 *)p) = cpu_to_le16(val);
+}
+
+static inline void put_unaligned_le32(u32 val, void *p)
+{
+	*((__le32 *)p) = cpu_to_le32(val);
+}
+
+static inline void put_unaligned_le64(u64 val, void *p)
+{
+	*((__le64 *)p) = cpu_to_le64(val);
+}
+
+static inline void put_unaligned_be16(u16 val, void *p)
+{
+	*((__be16 *)p) = cpu_to_be16(val);
+}
+
+static inline void put_unaligned_be32(u32 val, void *p)
+{
+	*((__be32 *)p) = cpu_to_be32(val);
+}
+
+static inline void put_unaligned_be64(u64 val, void *p)
+{
+	*((__be64 *)p) = cpu_to_be64(val);
+}
+
+#endif /* _LINUX_UNALIGNED_ACCESS_OK_H */
diff --git a/include/linux/unaligned/be_byteshift.h b/include/linux/unaligned/be_byteshift.h
new file mode 100644
index 00000000..9356b242
--- /dev/null
+++ b/include/linux/unaligned/be_byteshift.h
@@ -0,0 +1,70 @@
+#ifndef _LINUX_UNALIGNED_BE_BYTESHIFT_H
+#define _LINUX_UNALIGNED_BE_BYTESHIFT_H
+
+#include <linux/types.h>
+
+static inline u16 __get_unaligned_be16(const u8 *p)
+{
+	return p[0] << 8 | p[1];
+}
+
+static inline u32 __get_unaligned_be32(const u8 *p)
+{
+	return p[0] << 24 | p[1] << 16 | p[2] << 8 | p[3];
+}
+
+static inline u64 __get_unaligned_be64(const u8 *p)
+{
+	return (u64)__get_unaligned_be32(p) << 32 |
+	       __get_unaligned_be32(p + 4);
+}
+
+static inline void __put_unaligned_be16(u16 val, u8 *p)
+{
+	*p++ = val >> 8;
+	*p++ = val;
+}
+
+static inline void __put_unaligned_be32(u32 val, u8 *p)
+{
+	__put_unaligned_be16(val >> 16, p);
+	__put_unaligned_be16(val, p + 2);
+}
+
+static inline void __put_unaligned_be64(u64 val, u8 *p)
+{
+	__put_unaligned_be32(val >> 32, p);
+	__put_unaligned_be32(val, p + 4);
+}
+
+static inline u16 get_unaligned_be16(const void *p)
+{
+	return __get_unaligned_be16((const u8 *)p);
+}
+
+static inline u32 get_unaligned_be32(const void *p)
+{
+	return __get_unaligned_be32((const u8 *)p);
+}
+
+static inline u64 get_unaligned_be64(const void *p)
+{
+	return __get_unaligned_be64((const u8 *)p);
+}
+
+static inline void put_unaligned_be16(u16 val, void *p)
+{
+	__put_unaligned_be16(val, p);
+}
+
+static inline void put_unaligned_be32(u32 val, void *p)
+{
+	__put_unaligned_be32(val, p);
+}
+
+static inline void put_unaligned_be64(u64 val, void *p)
+{
+	__put_unaligned_be64(val, p);
+}
+
+#endif /* _LINUX_UNALIGNED_BE_BYTESHIFT_H */
diff --git a/include/linux/unaligned/be_memmove.h b/include/linux/unaligned/be_memmove.h
new file mode 100644
index 00000000..c2a76c5c
--- /dev/null
+++ b/include/linux/unaligned/be_memmove.h
@@ -0,0 +1,36 @@
+#ifndef _LINUX_UNALIGNED_BE_MEMMOVE_H
+#define _LINUX_UNALIGNED_BE_MEMMOVE_H
+
+#include <linux/unaligned/memmove.h>
+
+static inline u16 get_unaligned_be16(const void *p)
+{
+	return __get_unaligned_memmove16((const u8 *)p);
+}
+
+static inline u32 get_unaligned_be32(const void *p)
+{
+	return __get_unaligned_memmove32((const u8 *)p);
+}
+
+static inline u64 get_unaligned_be64(const void *p)
+{
+	return __get_unaligned_memmove64((const u8 *)p);
+}
+
+static inline void put_unaligned_be16(u16 val, void *p)
+{
+	__put_unaligned_memmove16(val, p);
+}
+
+static inline void put_unaligned_be32(u32 val, void *p)
+{
+	__put_unaligned_memmove32(val, p);
+}
+
+static inline void put_unaligned_be64(u64 val, void *p)
+{
+	__put_unaligned_memmove64(val, p);
+}
+
+#endif /* _LINUX_UNALIGNED_LE_MEMMOVE_H */
diff --git a/include/linux/unaligned/be_struct.h b/include/linux/unaligned/be_struct.h
new file mode 100644
index 00000000..13241583
--- /dev/null
+++ b/include/linux/unaligned/be_struct.h
@@ -0,0 +1,36 @@
+#ifndef _LINUX_UNALIGNED_BE_STRUCT_H
+#define _LINUX_UNALIGNED_BE_STRUCT_H
+
+#include <linux/unaligned/packed_struct.h>
+
+static inline u16 get_unaligned_be16(const void *p)
+{
+	return __get_unaligned_cpu16((const u8 *)p);
+}
+
+static inline u32 get_unaligned_be32(const void *p)
+{
+	return __get_unaligned_cpu32((const u8 *)p);
+}
+
+static inline u64 get_unaligned_be64(const void *p)
+{
+	return __get_unaligned_cpu64((const u8 *)p);
+}
+
+static inline void put_unaligned_be16(u16 val, void *p)
+{
+	__put_unaligned_cpu16(val, p);
+}
+
+static inline void put_unaligned_be32(u32 val, void *p)
+{
+	__put_unaligned_cpu32(val, p);
+}
+
+static inline void put_unaligned_be64(u64 val, void *p)
+{
+	__put_unaligned_cpu64(val, p);
+}
+
+#endif /* _LINUX_UNALIGNED_BE_STRUCT_H */
diff --git a/include/linux/unaligned/generic.h b/include/linux/unaligned/generic.h
new file mode 100644
index 00000000..02d97ff3
--- /dev/null
+++ b/include/linux/unaligned/generic.h
@@ -0,0 +1,68 @@
+#ifndef _LINUX_UNALIGNED_GENERIC_H
+#define _LINUX_UNALIGNED_GENERIC_H
+
+/*
+ * Cause a link-time error if we try an unaligned access other than
+ * 1,2,4 or 8 bytes long
+ */
+extern void __bad_unaligned_access_size(void);
+
+#define __get_unaligned_le(ptr) ((__force typeof(*(ptr)))({			\
+	__builtin_choose_expr(sizeof(*(ptr)) == 1, *(ptr),			\
+	__builtin_choose_expr(sizeof(*(ptr)) == 2, get_unaligned_le16((ptr)),	\
+	__builtin_choose_expr(sizeof(*(ptr)) == 4, get_unaligned_le32((ptr)),	\
+	__builtin_choose_expr(sizeof(*(ptr)) == 8, get_unaligned_le64((ptr)),	\
+	__bad_unaligned_access_size()))));					\
+	}))
+
+#define __get_unaligned_be(ptr) ((__force typeof(*(ptr)))({			\
+	__builtin_choose_expr(sizeof(*(ptr)) == 1, *(ptr),			\
+	__builtin_choose_expr(sizeof(*(ptr)) == 2, get_unaligned_be16((ptr)),	\
+	__builtin_choose_expr(sizeof(*(ptr)) == 4, get_unaligned_be32((ptr)),	\
+	__builtin_choose_expr(sizeof(*(ptr)) == 8, get_unaligned_be64((ptr)),	\
+	__bad_unaligned_access_size()))));					\
+	}))
+
+#define __put_unaligned_le(val, ptr) ({					\
+	void *__gu_p = (ptr);						\
+	switch (sizeof(*(ptr))) {					\
+	case 1:								\
+		*(u8 *)__gu_p = (__force u8)(val);			\
+		break;							\
+	case 2:								\
+		put_unaligned_le16((__force u16)(val), __gu_p);		\
+		break;							\
+	case 4:								\
+		put_unaligned_le32((__force u32)(val), __gu_p);		\
+		break;							\
+	case 8:								\
+		put_unaligned_le64((__force u64)(val), __gu_p);		\
+		break;							\
+	default:							\
+		__bad_unaligned_access_size();				\
+		break;							\
+	}								\
+	(void)0; })
+
+#define __put_unaligned_be(val, ptr) ({					\
+	void *__gu_p = (ptr);						\
+	switch (sizeof(*(ptr))) {					\
+	case 1:								\
+		*(u8 *)__gu_p = (__force u8)(val);			\
+		break;							\
+	case 2:								\
+		put_unaligned_be16((__force u16)(val), __gu_p);		\
+		break;							\
+	case 4:								\
+		put_unaligned_be32((__force u32)(val), __gu_p);		\
+		break;							\
+	case 8:								\
+		put_unaligned_be64((__force u64)(val), __gu_p);		\
+		break;							\
+	default:							\
+		__bad_unaligned_access_size();				\
+		break;							\
+	}								\
+	(void)0; })
+
+#endif /* _LINUX_UNALIGNED_GENERIC_H */
diff --git a/include/linux/unaligned/le_byteshift.h b/include/linux/unaligned/le_byteshift.h
new file mode 100644
index 00000000..be376fb7
--- /dev/null
+++ b/include/linux/unaligned/le_byteshift.h
@@ -0,0 +1,70 @@
+#ifndef _LINUX_UNALIGNED_LE_BYTESHIFT_H
+#define _LINUX_UNALIGNED_LE_BYTESHIFT_H
+
+#include <linux/types.h>
+
+static inline u16 __get_unaligned_le16(const u8 *p)
+{
+	return p[0] | p[1] << 8;
+}
+
+static inline u32 __get_unaligned_le32(const u8 *p)
+{
+	return p[0] | p[1] << 8 | p[2] << 16 | p[3] << 24;
+}
+
+static inline u64 __get_unaligned_le64(const u8 *p)
+{
+	return (u64)__get_unaligned_le32(p + 4) << 32 |
+	       __get_unaligned_le32(p);
+}
+
+static inline void __put_unaligned_le16(u16 val, u8 *p)
+{
+	*p++ = val;
+	*p++ = val >> 8;
+}
+
+static inline void __put_unaligned_le32(u32 val, u8 *p)
+{
+	__put_unaligned_le16(val >> 16, p + 2);
+	__put_unaligned_le16(val, p);
+}
+
+static inline void __put_unaligned_le64(u64 val, u8 *p)
+{
+	__put_unaligned_le32(val >> 32, p + 4);
+	__put_unaligned_le32(val, p);
+}
+
+static inline u16 get_unaligned_le16(const void *p)
+{
+	return __get_unaligned_le16((const u8 *)p);
+}
+
+static inline u32 get_unaligned_le32(const void *p)
+{
+	return __get_unaligned_le32((const u8 *)p);
+}
+
+static inline u64 get_unaligned_le64(const void *p)
+{
+	return __get_unaligned_le64((const u8 *)p);
+}
+
+static inline void put_unaligned_le16(u16 val, void *p)
+{
+	__put_unaligned_le16(val, p);
+}
+
+static inline void put_unaligned_le32(u32 val, void *p)
+{
+	__put_unaligned_le32(val, p);
+}
+
+static inline void put_unaligned_le64(u64 val, void *p)
+{
+	__put_unaligned_le64(val, p);
+}
+
+#endif /* _LINUX_UNALIGNED_LE_BYTESHIFT_H */
diff --git a/include/linux/unaligned/le_memmove.h b/include/linux/unaligned/le_memmove.h
new file mode 100644
index 00000000..269849be
--- /dev/null
+++ b/include/linux/unaligned/le_memmove.h
@@ -0,0 +1,36 @@
+#ifndef _LINUX_UNALIGNED_LE_MEMMOVE_H
+#define _LINUX_UNALIGNED_LE_MEMMOVE_H
+
+#include <linux/unaligned/memmove.h>
+
+static inline u16 get_unaligned_le16(const void *p)
+{
+	return __get_unaligned_memmove16((const u8 *)p);
+}
+
+static inline u32 get_unaligned_le32(const void *p)
+{
+	return __get_unaligned_memmove32((const u8 *)p);
+}
+
+static inline u64 get_unaligned_le64(const void *p)
+{
+	return __get_unaligned_memmove64((const u8 *)p);
+}
+
+static inline void put_unaligned_le16(u16 val, void *p)
+{
+	__put_unaligned_memmove16(val, p);
+}
+
+static inline void put_unaligned_le32(u32 val, void *p)
+{
+	__put_unaligned_memmove32(val, p);
+}
+
+static inline void put_unaligned_le64(u64 val, void *p)
+{
+	__put_unaligned_memmove64(val, p);
+}
+
+#endif /* _LINUX_UNALIGNED_LE_MEMMOVE_H */
diff --git a/include/linux/unaligned/le_struct.h b/include/linux/unaligned/le_struct.h
new file mode 100644
index 00000000..088c4572
--- /dev/null
+++ b/include/linux/unaligned/le_struct.h
@@ -0,0 +1,36 @@
+#ifndef _LINUX_UNALIGNED_LE_STRUCT_H
+#define _LINUX_UNALIGNED_LE_STRUCT_H
+
+#include <linux/unaligned/packed_struct.h>
+
+static inline u16 get_unaligned_le16(const void *p)
+{
+	return __get_unaligned_cpu16((const u8 *)p);
+}
+
+static inline u32 get_unaligned_le32(const void *p)
+{
+	return __get_unaligned_cpu32((const u8 *)p);
+}
+
+static inline u64 get_unaligned_le64(const void *p)
+{
+	return __get_unaligned_cpu64((const u8 *)p);
+}
+
+static inline void put_unaligned_le16(u16 val, void *p)
+{
+	__put_unaligned_cpu16(val, p);
+}
+
+static inline void put_unaligned_le32(u32 val, void *p)
+{
+	__put_unaligned_cpu32(val, p);
+}
+
+static inline void put_unaligned_le64(u64 val, void *p)
+{
+	__put_unaligned_cpu64(val, p);
+}
+
+#endif /* _LINUX_UNALIGNED_LE_STRUCT_H */
diff --git a/include/linux/unaligned/memmove.h b/include/linux/unaligned/memmove.h
new file mode 100644
index 00000000..eeb5a779
--- /dev/null
+++ b/include/linux/unaligned/memmove.h
@@ -0,0 +1,45 @@
+#ifndef _LINUX_UNALIGNED_MEMMOVE_H
+#define _LINUX_UNALIGNED_MEMMOVE_H
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+
+/* Use memmove here, so gcc does not insert a __builtin_memcpy. */
+
+static inline u16 __get_unaligned_memmove16(const void *p)
+{
+	u16 tmp;
+	memmove(&tmp, p, 2);
+	return tmp;
+}
+
+static inline u32 __get_unaligned_memmove32(const void *p)
+{
+	u32 tmp;
+	memmove(&tmp, p, 4);
+	return tmp;
+}
+
+static inline u64 __get_unaligned_memmove64(const void *p)
+{
+	u64 tmp;
+	memmove(&tmp, p, 8);
+	return tmp;
+}
+
+static inline void __put_unaligned_memmove16(u16 val, void *p)
+{
+	memmove(p, &val, 2);
+}
+
+static inline void __put_unaligned_memmove32(u32 val, void *p)
+{
+	memmove(p, &val, 4);
+}
+
+static inline void __put_unaligned_memmove64(u64 val, void *p)
+{
+	memmove(p, &val, 8);
+}
+
+#endif /* _LINUX_UNALIGNED_MEMMOVE_H */
diff --git a/include/linux/unaligned/packed_struct.h b/include/linux/unaligned/packed_struct.h
new file mode 100644
index 00000000..c0d817de
--- /dev/null
+++ b/include/linux/unaligned/packed_struct.h
@@ -0,0 +1,46 @@
+#ifndef _LINUX_UNALIGNED_PACKED_STRUCT_H
+#define _LINUX_UNALIGNED_PACKED_STRUCT_H
+
+#include <linux/kernel.h>
+
+struct __una_u16 { u16 x; } __packed;
+struct __una_u32 { u32 x; } __packed;
+struct __una_u64 { u64 x; } __packed;
+
+static inline u16 __get_unaligned_cpu16(const void *p)
+{
+	const struct __una_u16 *ptr = (const struct __una_u16 *)p;
+	return ptr->x;
+}
+
+static inline u32 __get_unaligned_cpu32(const void *p)
+{
+	const struct __una_u32 *ptr = (const struct __una_u32 *)p;
+	return ptr->x;
+}
+
+static inline u64 __get_unaligned_cpu64(const void *p)
+{
+	const struct __una_u64 *ptr = (const struct __una_u64 *)p;
+	return ptr->x;
+}
+
+static inline void __put_unaligned_cpu16(u16 val, void *p)
+{
+	struct __una_u16 *ptr = (struct __una_u16 *)p;
+	ptr->x = val;
+}
+
+static inline void __put_unaligned_cpu32(u32 val, void *p)
+{
+	struct __una_u32 *ptr = (struct __una_u32 *)p;
+	ptr->x = val;
+}
+
+static inline void __put_unaligned_cpu64(u64 val, void *p)
+{
+	struct __una_u64 *ptr = (struct __una_u64 *)p;
+	ptr->x = val;
+}
+
+#endif /* _LINUX_UNALIGNED_PACKED_STRUCT_H */
diff --git a/include/linux/unistd.h b/include/linux/unistd.h
new file mode 100644
index 00000000..aa8d5b5e
--- /dev/null
+++ b/include/linux/unistd.h
@@ -0,0 +1,9 @@
+#ifndef _LINUX_UNISTD_H_
+#define _LINUX_UNISTD_H_
+
+/*
+ * Include machine specific syscall numbers
+ */
+#include <asm/unistd.h>
+
+#endif /* _LINUX_UNISTD_H_ */
diff --git a/include/linux/unix_diag.h b/include/linux/unix_diag.h
new file mode 100644
index 00000000..b1d2bf16
--- /dev/null
+++ b/include/linux/unix_diag.h
@@ -0,0 +1,54 @@
+#ifndef __UNIX_DIAG_H__
+#define __UNIX_DIAG_H__
+
+#include <linux/types.h>
+
+struct unix_diag_req {
+	__u8	sdiag_family;
+	__u8	sdiag_protocol;
+	__u16	pad;
+	__u32	udiag_states;
+	__u32	udiag_ino;
+	__u32	udiag_show;
+	__u32	udiag_cookie[2];
+};
+
+#define UDIAG_SHOW_NAME		0x00000001	/* show name (not path) */
+#define UDIAG_SHOW_VFS		0x00000002	/* show VFS inode info */
+#define UDIAG_SHOW_PEER		0x00000004	/* show peer socket info */
+#define UDIAG_SHOW_ICONS	0x00000008	/* show pending connections */
+#define UDIAG_SHOW_RQLEN	0x00000010	/* show skb receive queue len */
+#define UDIAG_SHOW_MEMINFO	0x00000020	/* show memory info of a socket */
+
+struct unix_diag_msg {
+	__u8	udiag_family;
+	__u8	udiag_type;
+	__u8	udiag_state;
+	__u8	pad;
+
+	__u32	udiag_ino;
+	__u32	udiag_cookie[2];
+};
+
+enum {
+	UNIX_DIAG_NAME,
+	UNIX_DIAG_VFS,
+	UNIX_DIAG_PEER,
+	UNIX_DIAG_ICONS,
+	UNIX_DIAG_RQLEN,
+	UNIX_DIAG_MEMINFO,
+
+	UNIX_DIAG_MAX,
+};
+
+struct unix_diag_vfs {
+	__u32	udiag_vfs_ino;
+	__u32	udiag_vfs_dev;
+};
+
+struct unix_diag_rqlen {
+	__u32	udiag_rqueue;
+	__u32	udiag_wqueue;
+};
+
+#endif
diff --git a/include/linux/usb.h b/include/linux/usb.h
new file mode 100644
index 00000000..90f35bbe
--- /dev/null
+++ b/include/linux/usb.h
@@ -0,0 +1,1669 @@
+#ifndef __LINUX_USB_H
+#define __LINUX_USB_H
+
+#include <linux/mod_devicetable.h>
+#include <linux/usb/ch9.h>
+
+#define USB_MAJOR			180
+#define USB_DEVICE_MAJOR		189
+
+
+#ifdef __KERNEL__
+
+#include <linux/errno.h>        /* for -ENODEV */
+#include <linux/delay.h>	/* for mdelay() */
+#include <linux/interrupt.h>	/* for in_interrupt() */
+#include <linux/list.h>		/* for struct list_head */
+#include <linux/kref.h>		/* for struct kref */
+#include <linux/device.h>	/* for struct device */
+#include <linux/fs.h>		/* for struct file_operations */
+#include <linux/completion.h>	/* for struct completion */
+#include <linux/sched.h>	/* for current && schedule_timeout */
+#include <linux/mutex.h>	/* for struct mutex */
+#include <linux/pm_runtime.h>	/* for runtime PM */
+
+struct usb_device;
+struct usb_driver;
+struct wusb_dev;
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Host-side wrappers for standard USB descriptors ... these are parsed
+ * from the data provided by devices.  Parsing turns them from a flat
+ * sequence of descriptors into a hierarchy:
+ *
+ *  - devices have one (usually) or more configs;
+ *  - configs have one (often) or more interfaces;
+ *  - interfaces have one (usually) or more settings;
+ *  - each interface setting has zero or (usually) more endpoints.
+ *  - a SuperSpeed endpoint has a companion descriptor
+ *
+ * And there might be other descriptors mixed in with those.
+ *
+ * Devices may also have class-specific or vendor-specific descriptors.
+ */
+
+struct ep_device;
+
+/**
+ * struct usb_host_endpoint - host-side endpoint descriptor and queue
+ * @desc: descriptor for this endpoint, wMaxPacketSize in native byteorder
+ * @ss_ep_comp: SuperSpeed companion descriptor for this endpoint
+ * @urb_list: urbs queued to this endpoint; maintained by usbcore
+ * @hcpriv: for use by HCD; typically holds hardware dma queue head (QH)
+ *	with one or more transfer descriptors (TDs) per urb
+ * @ep_dev: ep_device for sysfs info
+ * @extra: descriptors following this endpoint in the configuration
+ * @extralen: how many bytes of "extra" are valid
+ * @enabled: URBs may be submitted to this endpoint
+ *
+ * USB requests are always queued to a given endpoint, identified by a
+ * descriptor within an active interface in a given USB configuration.
+ */
+struct usb_host_endpoint {
+	struct usb_endpoint_descriptor		desc;
+	struct usb_ss_ep_comp_descriptor	ss_ep_comp;
+	struct list_head		urb_list;
+	void				*hcpriv;
+	struct ep_device		*ep_dev;	/* For sysfs info */
+
+	unsigned char *extra;   /* Extra descriptors */
+	int extralen;
+	int enabled;
+};
+
+/* host-side wrapper for one interface setting's parsed descriptors */
+struct usb_host_interface {
+	struct usb_interface_descriptor	desc;
+
+	/* array of desc.bNumEndpoint endpoints associated with this
+	 * interface setting.  these will be in no particular order.
+	 */
+	struct usb_host_endpoint *endpoint;
+
+	char *string;		/* iInterface string, if present */
+	unsigned char *extra;   /* Extra descriptors */
+	int extralen;
+};
+
+enum usb_interface_condition {
+	USB_INTERFACE_UNBOUND = 0,
+	USB_INTERFACE_BINDING,
+	USB_INTERFACE_BOUND,
+	USB_INTERFACE_UNBINDING,
+};
+
+/**
+ * struct usb_interface - what usb device drivers talk to
+ * @altsetting: array of interface structures, one for each alternate
+ *	setting that may be selected.  Each one includes a set of
+ *	endpoint configurations.  They will be in no particular order.
+ * @cur_altsetting: the current altsetting.
+ * @num_altsetting: number of altsettings defined.
+ * @intf_assoc: interface association descriptor
+ * @minor: the minor number assigned to this interface, if this
+ *	interface is bound to a driver that uses the USB major number.
+ *	If this interface does not use the USB major, this field should
+ *	be unused.  The driver should set this value in the probe()
+ *	function of the driver, after it has been assigned a minor
+ *	number from the USB core by calling usb_register_dev().
+ * @condition: binding state of the interface: not bound, binding
+ *	(in probe()), bound to a driver, or unbinding (in disconnect())
+ * @sysfs_files_created: sysfs attributes exist
+ * @ep_devs_created: endpoint child pseudo-devices exist
+ * @unregistering: flag set when the interface is being unregistered
+ * @needs_remote_wakeup: flag set when the driver requires remote-wakeup
+ *	capability during autosuspend.
+ * @needs_altsetting0: flag set when a set-interface request for altsetting 0
+ *	has been deferred.
+ * @needs_binding: flag set when the driver should be re-probed or unbound
+ *	following a reset or suspend operation it doesn't support.
+ * @dev: driver model's view of this device
+ * @usb_dev: if an interface is bound to the USB major, this will point
+ *	to the sysfs representation for that device.
+ * @pm_usage_cnt: PM usage counter for this interface
+ * @reset_ws: Used for scheduling resets from atomic context.
+ * @reset_running: set to 1 if the interface is currently running a
+ *      queued reset so that usb_cancel_queued_reset() doesn't try to
+ *      remove from the workqueue when running inside the worker
+ *      thread. See __usb_queue_reset_device().
+ * @resetting_device: USB core reset the device, so use alt setting 0 as
+ *	current; needs bandwidth alloc after reset.
+ *
+ * USB device drivers attach to interfaces on a physical device.  Each
+ * interface encapsulates a single high level function, such as feeding
+ * an audio stream to a speaker or reporting a change in a volume control.
+ * Many USB devices only have one interface.  The protocol used to talk to
+ * an interface's endpoints can be defined in a usb "class" specification,
+ * or by a product's vendor.  The (default) control endpoint is part of
+ * every interface, but is never listed among the interface's descriptors.
+ *
+ * The driver that is bound to the interface can use standard driver model
+ * calls such as dev_get_drvdata() on the dev member of this structure.
+ *
+ * Each interface may have alternate settings.  The initial configuration
+ * of a device sets altsetting 0, but the device driver can change
+ * that setting using usb_set_interface().  Alternate settings are often
+ * used to control the use of periodic endpoints, such as by having
+ * different endpoints use different amounts of reserved USB bandwidth.
+ * All standards-conformant USB devices that use isochronous endpoints
+ * will use them in non-default settings.
+ *
+ * The USB specification says that alternate setting numbers must run from
+ * 0 to one less than the total number of alternate settings.  But some
+ * devices manage to mess this up, and the structures aren't necessarily
+ * stored in numerical order anyhow.  Use usb_altnum_to_altsetting() to
+ * look up an alternate setting in the altsetting array based on its number.
+ */
+struct usb_interface {
+	/* array of alternate settings for this interface,
+	 * stored in no particular order */
+	struct usb_host_interface *altsetting;
+
+	struct usb_host_interface *cur_altsetting;	/* the currently
+					 * active alternate setting */
+	unsigned num_altsetting;	/* number of alternate settings */
+
+	/* If there is an interface association descriptor then it will list
+	 * the associated interfaces */
+	struct usb_interface_assoc_descriptor *intf_assoc;
+
+	int minor;			/* minor number this interface is
+					 * bound to */
+	enum usb_interface_condition condition;		/* state of binding */
+	unsigned sysfs_files_created:1;	/* the sysfs attributes exist */
+	unsigned ep_devs_created:1;	/* endpoint "devices" exist */
+	unsigned unregistering:1;	/* unregistration is in progress */
+	unsigned needs_remote_wakeup:1;	/* driver requires remote wakeup */
+	unsigned needs_altsetting0:1;	/* switch to altsetting 0 is pending */
+	unsigned needs_binding:1;	/* needs delayed unbind/rebind */
+	unsigned reset_running:1;
+	unsigned resetting_device:1;	/* true: bandwidth alloc after reset */
+
+	struct device dev;		/* interface specific device info */
+	struct device *usb_dev;
+	atomic_t pm_usage_cnt;		/* usage counter for autosuspend */
+	struct work_struct reset_ws;	/* for resets in atomic context */
+};
+#define	to_usb_interface(d) container_of(d, struct usb_interface, dev)
+
+static inline void *usb_get_intfdata(struct usb_interface *intf)
+{
+	return dev_get_drvdata(&intf->dev);
+}
+
+static inline void usb_set_intfdata(struct usb_interface *intf, void *data)
+{
+	dev_set_drvdata(&intf->dev, data);
+}
+
+struct usb_interface *usb_get_intf(struct usb_interface *intf);
+void usb_put_intf(struct usb_interface *intf);
+
+/* this maximum is arbitrary */
+#define USB_MAXINTERFACES	32
+#define USB_MAXIADS		(USB_MAXINTERFACES/2)
+
+/**
+ * struct usb_interface_cache - long-term representation of a device interface
+ * @num_altsetting: number of altsettings defined.
+ * @ref: reference counter.
+ * @altsetting: variable-length array of interface structures, one for
+ *	each alternate setting that may be selected.  Each one includes a
+ *	set of endpoint configurations.  They will be in no particular order.
+ *
+ * These structures persist for the lifetime of a usb_device, unlike
+ * struct usb_interface (which persists only as long as its configuration
+ * is installed).  The altsetting arrays can be accessed through these
+ * structures at any time, permitting comparison of configurations and
+ * providing support for the /proc/bus/usb/devices pseudo-file.
+ */
+struct usb_interface_cache {
+	unsigned num_altsetting;	/* number of alternate settings */
+	struct kref ref;		/* reference counter */
+
+	/* variable-length array of alternate settings for this interface,
+	 * stored in no particular order */
+	struct usb_host_interface altsetting[0];
+};
+#define	ref_to_usb_interface_cache(r) \
+		container_of(r, struct usb_interface_cache, ref)
+#define	altsetting_to_usb_interface_cache(a) \
+		container_of(a, struct usb_interface_cache, altsetting[0])
+
+/**
+ * struct usb_host_config - representation of a device's configuration
+ * @desc: the device's configuration descriptor.
+ * @string: pointer to the cached version of the iConfiguration string, if
+ *	present for this configuration.
+ * @intf_assoc: list of any interface association descriptors in this config
+ * @interface: array of pointers to usb_interface structures, one for each
+ *	interface in the configuration.  The number of interfaces is stored
+ *	in desc.bNumInterfaces.  These pointers are valid only while the
+ *	the configuration is active.
+ * @intf_cache: array of pointers to usb_interface_cache structures, one
+ *	for each interface in the configuration.  These structures exist
+ *	for the entire life of the device.
+ * @extra: pointer to buffer containing all extra descriptors associated
+ *	with this configuration (those preceding the first interface
+ *	descriptor).
+ * @extralen: length of the extra descriptors buffer.
+ *
+ * USB devices may have multiple configurations, but only one can be active
+ * at any time.  Each encapsulates a different operational environment;
+ * for example, a dual-speed device would have separate configurations for
+ * full-speed and high-speed operation.  The number of configurations
+ * available is stored in the device descriptor as bNumConfigurations.
+ *
+ * A configuration can contain multiple interfaces.  Each corresponds to
+ * a different function of the USB device, and all are available whenever
+ * the configuration is active.  The USB standard says that interfaces
+ * are supposed to be numbered from 0 to desc.bNumInterfaces-1, but a lot
+ * of devices get this wrong.  In addition, the interface array is not
+ * guaranteed to be sorted in numerical order.  Use usb_ifnum_to_if() to
+ * look up an interface entry based on its number.
+ *
+ * Device drivers should not attempt to activate configurations.  The choice
+ * of which configuration to install is a policy decision based on such
+ * considerations as available power, functionality provided, and the user's
+ * desires (expressed through userspace tools).  However, drivers can call
+ * usb_reset_configuration() to reinitialize the current configuration and
+ * all its interfaces.
+ */
+struct usb_host_config {
+	struct usb_config_descriptor	desc;
+
+	char *string;		/* iConfiguration string, if present */
+
+	/* List of any Interface Association Descriptors in this
+	 * configuration. */
+	struct usb_interface_assoc_descriptor *intf_assoc[USB_MAXIADS];
+
+	/* the interfaces associated with this configuration,
+	 * stored in no particular order */
+	struct usb_interface *interface[USB_MAXINTERFACES];
+
+	/* Interface information available even when this is not the
+	 * active configuration */
+	struct usb_interface_cache *intf_cache[USB_MAXINTERFACES];
+
+	unsigned char *extra;   /* Extra descriptors */
+	int extralen;
+};
+
+/* USB2.0 and USB3.0 device BOS descriptor set */
+struct usb_host_bos {
+	struct usb_bos_descriptor	*desc;
+
+	/* wireless cap descriptor is handled by wusb */
+	struct usb_ext_cap_descriptor	*ext_cap;
+	struct usb_ss_cap_descriptor	*ss_cap;
+	struct usb_ss_container_id_descriptor	*ss_id;
+};
+
+int __usb_get_extra_descriptor(char *buffer, unsigned size,
+	unsigned char type, void **ptr);
+#define usb_get_extra_descriptor(ifpoint, type, ptr) \
+				__usb_get_extra_descriptor((ifpoint)->extra, \
+				(ifpoint)->extralen, \
+				type, (void **)ptr)
+
+/* ----------------------------------------------------------------------- */
+
+/* USB device number allocation bitmap */
+struct usb_devmap {
+	unsigned long devicemap[128 / (8*sizeof(unsigned long))];
+};
+
+/*
+ * Allocated per bus (tree of devices) we have:
+ */
+struct usb_bus {
+	struct device *controller;	/* host/master side hardware */
+	int busnum;			/* Bus number (in order of reg) */
+	const char *bus_name;		/* stable id (PCI slot_name etc) */
+	u8 uses_dma;			/* Does the host controller use DMA? */
+	u8 uses_pio_for_control;	/*
+					 * Does the host controller use PIO
+					 * for control transfers?
+					 */
+	u8 otg_port;			/* 0, or number of OTG/HNP port */
+	unsigned is_b_host:1;		/* true during some HNP roleswitches */
+	unsigned b_hnp_enable:1;	/* OTG: did A-Host enable HNP? */
+	unsigned sg_tablesize;		/* 0 or largest number of sg list entries */
+
+	int devnum_next;		/* Next open device number in
+					 * round-robin allocation */
+
+	struct usb_devmap devmap;	/* device address allocation map */
+	struct usb_device *root_hub;	/* Root hub */
+	struct usb_bus *hs_companion;	/* Companion EHCI bus, if any */
+	struct list_head bus_list;	/* list of busses */
+
+	int bandwidth_allocated;	/* on this bus: how much of the time
+					 * reserved for periodic (intr/iso)
+					 * requests is used, on average?
+					 * Units: microseconds/frame.
+					 * Limits: Full/low speed reserve 90%,
+					 * while high speed reserves 80%.
+					 */
+	int bandwidth_int_reqs;		/* number of Interrupt requests */
+	int bandwidth_isoc_reqs;	/* number of Isoc. requests */
+
+#ifdef CONFIG_USB_DEVICEFS
+	struct dentry *usbfs_dentry;	/* usbfs dentry entry for the bus */
+#endif
+
+#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
+	struct mon_bus *mon_bus;	/* non-null when associated */
+	int monitored;			/* non-zero when monitored */
+#endif
+};
+
+/* ----------------------------------------------------------------------- */
+
+/* This is arbitrary.
+ * From USB 2.0 spec Table 11-13, offset 7, a hub can
+ * have up to 255 ports. The most yet reported is 10.
+ *
+ * Current Wireless USB host hardware (Intel i1480 for example) allows
+ * up to 22 devices to connect. Upcoming hardware might raise that
+ * limit. Because the arrays need to add a bit for hub status data, we
+ * do 31, so plus one evens out to four bytes.
+ */
+#define USB_MAXCHILDREN		(31)
+
+struct usb_tt;
+
+enum usb_device_removable {
+	USB_DEVICE_REMOVABLE_UNKNOWN = 0,
+	USB_DEVICE_REMOVABLE,
+	USB_DEVICE_FIXED,
+};
+
+/**
+ * struct usb_device - kernel's representation of a USB device
+ * @devnum: device number; address on a USB bus
+ * @devpath: device ID string for use in messages (e.g., /port/...)
+ * @route: tree topology hex string for use with xHCI
+ * @state: device state: configured, not attached, etc.
+ * @speed: device speed: high/full/low (or error)
+ * @tt: Transaction Translator info; used with low/full speed dev, highspeed hub
+ * @ttport: device port on that tt hub
+ * @toggle: one bit for each endpoint, with ([0] = IN, [1] = OUT) endpoints
+ * @parent: our hub, unless we're the root
+ * @bus: bus we're part of
+ * @ep0: endpoint 0 data (default control pipe)
+ * @dev: generic device interface
+ * @descriptor: USB device descriptor
+ * @bos: USB device BOS descriptor set
+ * @config: all of the device's configs
+ * @actconfig: the active configuration
+ * @ep_in: array of IN endpoints
+ * @ep_out: array of OUT endpoints
+ * @rawdescriptors: raw descriptors for each config
+ * @bus_mA: Current available from the bus
+ * @portnum: parent port number (origin 1)
+ * @level: number of USB hub ancestors
+ * @can_submit: URBs may be submitted
+ * @persist_enabled:  USB_PERSIST enabled for this device
+ * @have_langid: whether string_langid is valid
+ * @authorized: policy has said we can use it;
+ *	(user space) policy determines if we authorize this device to be
+ *	used or not. By default, wired USB devices are authorized.
+ *	WUSB devices are not, until we authorize them from user space.
+ *	FIXME -- complete doc
+ * @authenticated: Crypto authentication passed
+ * @wusb: device is Wireless USB
+ * @lpm_capable: device supports LPM
+ * @usb2_hw_lpm_capable: device can perform USB2 hardware LPM
+ * @usb2_hw_lpm_enabled: USB2 hardware LPM enabled
+ * @string_langid: language ID for strings
+ * @product: iProduct string, if present (static)
+ * @manufacturer: iManufacturer string, if present (static)
+ * @serial: iSerialNumber string, if present (static)
+ * @filelist: usbfs files that are open to this device
+ * @usb_classdev: USB class device that was created for usbfs device
+ *	access from userspace
+ * @usbfs_dentry: usbfs dentry entry for the device
+ * @maxchild: number of ports if hub
+ * @children: child devices - USB devices that are attached to this hub
+ * @quirks: quirks of the whole device
+ * @urbnum: number of URBs submitted for the whole device
+ * @active_duration: total time device is not suspended
+ * @connect_time: time device was first connected
+ * @do_remote_wakeup:  remote wakeup should be enabled
+ * @reset_resume: needs reset instead of resume
+ * @wusb_dev: if this is a Wireless USB device, link to the WUSB
+ *	specific data for the device.
+ * @slot_id: Slot ID assigned by xHCI
+ * @removable: Device can be physically removed from this port
+ *
+ * Notes:
+ * Usbcore drivers should not set usbdev->state directly.  Instead use
+ * usb_set_device_state().
+ */
+struct usb_device {
+	int		devnum;
+	char		devpath[16];
+	u32		route;
+	enum usb_device_state	state;
+	enum usb_device_speed	speed;
+
+	struct usb_tt	*tt;
+	int		ttport;
+
+	unsigned int toggle[2];
+
+	struct usb_device *parent;
+	struct usb_bus *bus;
+	struct usb_host_endpoint ep0;
+
+	struct device dev;
+
+	struct usb_device_descriptor descriptor;
+	struct usb_host_bos *bos;
+	struct usb_host_config *config;
+
+	struct usb_host_config *actconfig;
+	struct usb_host_endpoint *ep_in[16];
+	struct usb_host_endpoint *ep_out[16];
+
+	char **rawdescriptors;
+
+	unsigned short bus_mA;
+	u8 portnum;
+	u8 level;
+
+	unsigned can_submit:1;
+	unsigned persist_enabled:1;
+	unsigned have_langid:1;
+	unsigned authorized:1;
+	unsigned authenticated:1;
+	unsigned wusb:1;
+	unsigned lpm_capable:1;
+	unsigned usb2_hw_lpm_capable:1;
+	unsigned usb2_hw_lpm_enabled:1;
+	int string_langid;
+
+	/* static strings from the device */
+	char *product;
+	char *manufacturer;
+	char *serial;
+
+	struct list_head filelist;
+#ifdef CONFIG_USB_DEVICE_CLASS
+	struct device *usb_classdev;
+#endif
+#ifdef CONFIG_USB_DEVICEFS
+	struct dentry *usbfs_dentry;
+#endif
+
+	int maxchild;
+	struct usb_device **children;
+
+	u32 quirks;
+	atomic_t urbnum;
+
+	unsigned long active_duration;
+
+#ifdef CONFIG_PM
+	unsigned long connect_time;
+
+	unsigned do_remote_wakeup:1;
+	unsigned reset_resume:1;
+#endif
+	struct wusb_dev *wusb_dev;
+	int slot_id;
+	enum usb_device_removable removable;
+};
+#define	to_usb_device(d) container_of(d, struct usb_device, dev)
+
+static inline struct usb_device *interface_to_usbdev(struct usb_interface *intf)
+{
+	return to_usb_device(intf->dev.parent);
+}
+
+extern struct usb_device *usb_get_dev(struct usb_device *dev);
+extern void usb_put_dev(struct usb_device *dev);
+
+/* USB device locking */
+#define usb_lock_device(udev)		device_lock(&(udev)->dev)
+#define usb_unlock_device(udev)		device_unlock(&(udev)->dev)
+#define usb_trylock_device(udev)	device_trylock(&(udev)->dev)
+extern int usb_lock_device_for_reset(struct usb_device *udev,
+				     const struct usb_interface *iface);
+
+/* USB port reset for device reinitialization */
+extern int usb_reset_device(struct usb_device *dev);
+extern void usb_queue_reset_device(struct usb_interface *dev);
+
+
+/* USB autosuspend and autoresume */
+#ifdef CONFIG_USB_SUSPEND
+extern void usb_enable_autosuspend(struct usb_device *udev);
+extern void usb_disable_autosuspend(struct usb_device *udev);
+
+extern int usb_autopm_get_interface(struct usb_interface *intf);
+extern void usb_autopm_put_interface(struct usb_interface *intf);
+extern int usb_autopm_get_interface_async(struct usb_interface *intf);
+extern void usb_autopm_put_interface_async(struct usb_interface *intf);
+extern void usb_autopm_get_interface_no_resume(struct usb_interface *intf);
+extern void usb_autopm_put_interface_no_suspend(struct usb_interface *intf);
+
+static inline void usb_mark_last_busy(struct usb_device *udev)
+{
+	pm_runtime_mark_last_busy(&udev->dev);
+}
+
+#else
+
+static inline int usb_enable_autosuspend(struct usb_device *udev)
+{ return 0; }
+static inline int usb_disable_autosuspend(struct usb_device *udev)
+{ return 0; }
+
+static inline int usb_autopm_get_interface(struct usb_interface *intf)
+{ return 0; }
+static inline int usb_autopm_get_interface_async(struct usb_interface *intf)
+{ return 0; }
+
+static inline void usb_autopm_put_interface(struct usb_interface *intf)
+{ }
+static inline void usb_autopm_put_interface_async(struct usb_interface *intf)
+{ }
+static inline void usb_autopm_get_interface_no_resume(
+		struct usb_interface *intf)
+{ }
+static inline void usb_autopm_put_interface_no_suspend(
+		struct usb_interface *intf)
+{ }
+static inline void usb_mark_last_busy(struct usb_device *udev)
+{ }
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/* for drivers using iso endpoints */
+extern int usb_get_current_frame_number(struct usb_device *usb_dev);
+
+/* Sets up a group of bulk endpoints to support multiple stream IDs. */
+extern int usb_alloc_streams(struct usb_interface *interface,
+		struct usb_host_endpoint **eps, unsigned int num_eps,
+		unsigned int num_streams, gfp_t mem_flags);
+
+/* Reverts a group of bulk endpoints back to not using stream IDs. */
+extern void usb_free_streams(struct usb_interface *interface,
+		struct usb_host_endpoint **eps, unsigned int num_eps,
+		gfp_t mem_flags);
+
+/* used these for multi-interface device registration */
+extern int usb_driver_claim_interface(struct usb_driver *driver,
+			struct usb_interface *iface, void *priv);
+
+/**
+ * usb_interface_claimed - returns true iff an interface is claimed
+ * @iface: the interface being checked
+ *
+ * Returns true (nonzero) iff the interface is claimed, else false (zero).
+ * Callers must own the driver model's usb bus readlock.  So driver
+ * probe() entries don't need extra locking, but other call contexts
+ * may need to explicitly claim that lock.
+ *
+ */
+static inline int usb_interface_claimed(struct usb_interface *iface)
+{
+	return (iface->dev.driver != NULL);
+}
+
+extern void usb_driver_release_interface(struct usb_driver *driver,
+			struct usb_interface *iface);
+const struct usb_device_id *usb_match_id(struct usb_interface *interface,
+					 const struct usb_device_id *id);
+extern int usb_match_one_id(struct usb_interface *interface,
+			    const struct usb_device_id *id);
+
+extern struct usb_interface *usb_find_interface(struct usb_driver *drv,
+		int minor);
+extern struct usb_interface *usb_ifnum_to_if(const struct usb_device *dev,
+		unsigned ifnum);
+extern struct usb_host_interface *usb_altnum_to_altsetting(
+		const struct usb_interface *intf, unsigned int altnum);
+extern struct usb_host_interface *usb_find_alt_setting(
+		struct usb_host_config *config,
+		unsigned int iface_num,
+		unsigned int alt_num);
+
+
+/**
+ * usb_make_path - returns stable device path in the usb tree
+ * @dev: the device whose path is being constructed
+ * @buf: where to put the string
+ * @size: how big is "buf"?
+ *
+ * Returns length of the string (> 0) or negative if size was too small.
+ *
+ * This identifier is intended to be "stable", reflecting physical paths in
+ * hardware such as physical bus addresses for host controllers or ports on
+ * USB hubs.  That makes it stay the same until systems are physically
+ * reconfigured, by re-cabling a tree of USB devices or by moving USB host
+ * controllers.  Adding and removing devices, including virtual root hubs
+ * in host controller driver modules, does not change these path identifiers;
+ * neither does rebooting or re-enumerating.  These are more useful identifiers
+ * than changeable ("unstable") ones like bus numbers or device addresses.
+ *
+ * With a partial exception for devices connected to USB 2.0 root hubs, these
+ * identifiers are also predictable.  So long as the device tree isn't changed,
+ * plugging any USB device into a given hub port always gives it the same path.
+ * Because of the use of "companion" controllers, devices connected to ports on
+ * USB 2.0 root hubs (EHCI host controllers) will get one path ID if they are
+ * high speed, and a different one if they are full or low speed.
+ */
+static inline int usb_make_path(struct usb_device *dev, char *buf, size_t size)
+{
+	int actual;
+	actual = snprintf(buf, size, "usb-%s-%s", dev->bus->bus_name,
+			  dev->devpath);
+	return (actual >= (int)size) ? -1 : actual;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#define USB_DEVICE_ID_MATCH_DEVICE \
+		(USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT)
+#define USB_DEVICE_ID_MATCH_DEV_RANGE \
+		(USB_DEVICE_ID_MATCH_DEV_LO | USB_DEVICE_ID_MATCH_DEV_HI)
+#define USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION \
+		(USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_DEV_RANGE)
+#define USB_DEVICE_ID_MATCH_DEV_INFO \
+		(USB_DEVICE_ID_MATCH_DEV_CLASS | \
+		USB_DEVICE_ID_MATCH_DEV_SUBCLASS | \
+		USB_DEVICE_ID_MATCH_DEV_PROTOCOL)
+#define USB_DEVICE_ID_MATCH_INT_INFO \
+		(USB_DEVICE_ID_MATCH_INT_CLASS | \
+		USB_DEVICE_ID_MATCH_INT_SUBCLASS | \
+		USB_DEVICE_ID_MATCH_INT_PROTOCOL)
+
+/**
+ * USB_DEVICE - macro used to describe a specific usb device
+ * @vend: the 16 bit USB Vendor ID
+ * @prod: the 16 bit USB Product ID
+ *
+ * This macro is used to create a struct usb_device_id that matches a
+ * specific device.
+ */
+#define USB_DEVICE(vend, prod) \
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE, \
+	.idVendor = (vend), \
+	.idProduct = (prod)
+/**
+ * USB_DEVICE_VER - describe a specific usb device with a version range
+ * @vend: the 16 bit USB Vendor ID
+ * @prod: the 16 bit USB Product ID
+ * @lo: the bcdDevice_lo value
+ * @hi: the bcdDevice_hi value
+ *
+ * This macro is used to create a struct usb_device_id that matches a
+ * specific device, with a version range.
+ */
+#define USB_DEVICE_VER(vend, prod, lo, hi) \
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION, \
+	.idVendor = (vend), \
+	.idProduct = (prod), \
+	.bcdDevice_lo = (lo), \
+	.bcdDevice_hi = (hi)
+
+/**
+ * USB_DEVICE_INTERFACE_PROTOCOL - describe a usb device with a specific interface protocol
+ * @vend: the 16 bit USB Vendor ID
+ * @prod: the 16 bit USB Product ID
+ * @pr: bInterfaceProtocol value
+ *
+ * This macro is used to create a struct usb_device_id that matches a
+ * specific interface protocol of devices.
+ */
+#define USB_DEVICE_INTERFACE_PROTOCOL(vend, prod, pr) \
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
+		       USB_DEVICE_ID_MATCH_INT_PROTOCOL, \
+	.idVendor = (vend), \
+	.idProduct = (prod), \
+	.bInterfaceProtocol = (pr)
+
+/**
+ * USB_DEVICE_INFO - macro used to describe a class of usb devices
+ * @cl: bDeviceClass value
+ * @sc: bDeviceSubClass value
+ * @pr: bDeviceProtocol value
+ *
+ * This macro is used to create a struct usb_device_id that matches a
+ * specific class of devices.
+ */
+#define USB_DEVICE_INFO(cl, sc, pr) \
+	.match_flags = USB_DEVICE_ID_MATCH_DEV_INFO, \
+	.bDeviceClass = (cl), \
+	.bDeviceSubClass = (sc), \
+	.bDeviceProtocol = (pr)
+
+/**
+ * USB_INTERFACE_INFO - macro used to describe a class of usb interfaces
+ * @cl: bInterfaceClass value
+ * @sc: bInterfaceSubClass value
+ * @pr: bInterfaceProtocol value
+ *
+ * This macro is used to create a struct usb_device_id that matches a
+ * specific class of interfaces.
+ */
+#define USB_INTERFACE_INFO(cl, sc, pr) \
+	.match_flags = USB_DEVICE_ID_MATCH_INT_INFO, \
+	.bInterfaceClass = (cl), \
+	.bInterfaceSubClass = (sc), \
+	.bInterfaceProtocol = (pr)
+
+/**
+ * USB_DEVICE_AND_INTERFACE_INFO - describe a specific usb device with a class of usb interfaces
+ * @vend: the 16 bit USB Vendor ID
+ * @prod: the 16 bit USB Product ID
+ * @cl: bInterfaceClass value
+ * @sc: bInterfaceSubClass value
+ * @pr: bInterfaceProtocol value
+ *
+ * This macro is used to create a struct usb_device_id that matches a
+ * specific device with a specific class of interfaces.
+ *
+ * This is especially useful when explicitly matching devices that have
+ * vendor specific bDeviceClass values, but standards-compliant interfaces.
+ */
+#define USB_DEVICE_AND_INTERFACE_INFO(vend, prod, cl, sc, pr) \
+	.match_flags = USB_DEVICE_ID_MATCH_INT_INFO \
+		| USB_DEVICE_ID_MATCH_DEVICE, \
+	.idVendor = (vend), \
+	.idProduct = (prod), \
+	.bInterfaceClass = (cl), \
+	.bInterfaceSubClass = (sc), \
+	.bInterfaceProtocol = (pr)
+
+/* ----------------------------------------------------------------------- */
+
+/* Stuff for dynamic usb ids */
+struct usb_dynids {
+	spinlock_t lock;
+	struct list_head list;
+};
+
+struct usb_dynid {
+	struct list_head node;
+	struct usb_device_id id;
+};
+
+extern ssize_t usb_store_new_id(struct usb_dynids *dynids,
+				struct device_driver *driver,
+				const char *buf, size_t count);
+
+/**
+ * struct usbdrv_wrap - wrapper for driver-model structure
+ * @driver: The driver-model core driver structure.
+ * @for_devices: Non-zero for device drivers, 0 for interface drivers.
+ */
+struct usbdrv_wrap {
+	struct device_driver driver;
+	int for_devices;
+};
+
+/**
+ * struct usb_driver - identifies USB interface driver to usbcore
+ * @name: The driver name should be unique among USB drivers,
+ *	and should normally be the same as the module name.
+ * @probe: Called to see if the driver is willing to manage a particular
+ *	interface on a device.  If it is, probe returns zero and uses
+ *	usb_set_intfdata() to associate driver-specific data with the
+ *	interface.  It may also use usb_set_interface() to specify the
+ *	appropriate altsetting.  If unwilling to manage the interface,
+ *	return -ENODEV, if genuine IO errors occurred, an appropriate
+ *	negative errno value.
+ * @disconnect: Called when the interface is no longer accessible, usually
+ *	because its device has been (or is being) disconnected or the
+ *	driver module is being unloaded.
+ * @unlocked_ioctl: Used for drivers that want to talk to userspace through
+ *	the "usbfs" filesystem.  This lets devices provide ways to
+ *	expose information to user space regardless of where they
+ *	do (or don't) show up otherwise in the filesystem.
+ * @suspend: Called when the device is going to be suspended by the system.
+ * @resume: Called when the device is being resumed by the system.
+ * @reset_resume: Called when the suspended device has been reset instead
+ *	of being resumed.
+ * @pre_reset: Called by usb_reset_device() when the device is about to be
+ *	reset.  This routine must not return until the driver has no active
+ *	URBs for the device, and no more URBs may be submitted until the
+ *	post_reset method is called.
+ * @post_reset: Called by usb_reset_device() after the device
+ *	has been reset
+ * @id_table: USB drivers use ID table to support hotplugging.
+ *	Export this with MODULE_DEVICE_TABLE(usb,...).  This must be set
+ *	or your driver's probe function will never get called.
+ * @dynids: used internally to hold the list of dynamically added device
+ *	ids for this driver.
+ * @drvwrap: Driver-model core structure wrapper.
+ * @no_dynamic_id: if set to 1, the USB core will not allow dynamic ids to be
+ *	added to this driver by preventing the sysfs file from being created.
+ * @supports_autosuspend: if set to 0, the USB core will not allow autosuspend
+ *	for interfaces bound to this driver.
+ * @soft_unbind: if set to 1, the USB core will not kill URBs and disable
+ *	endpoints before calling the driver's disconnect method.
+ *
+ * USB interface drivers must provide a name, probe() and disconnect()
+ * methods, and an id_table.  Other driver fields are optional.
+ *
+ * The id_table is used in hotplugging.  It holds a set of descriptors,
+ * and specialized data may be associated with each entry.  That table
+ * is used by both user and kernel mode hotplugging support.
+ *
+ * The probe() and disconnect() methods are called in a context where
+ * they can sleep, but they should avoid abusing the privilege.  Most
+ * work to connect to a device should be done when the device is opened,
+ * and undone at the last close.  The disconnect code needs to address
+ * concurrency issues with respect to open() and close() methods, as
+ * well as forcing all pending I/O requests to complete (by unlinking
+ * them as necessary, and blocking until the unlinks complete).
+ */
+struct usb_driver {
+	const char *name;
+
+	int (*probe) (struct usb_interface *intf,
+		      const struct usb_device_id *id);
+
+	void (*disconnect) (struct usb_interface *intf);
+
+	int (*unlocked_ioctl) (struct usb_interface *intf, unsigned int code,
+			void *buf);
+
+	int (*suspend) (struct usb_interface *intf, pm_message_t message);
+	int (*resume) (struct usb_interface *intf);
+	int (*reset_resume)(struct usb_interface *intf);
+
+	int (*pre_reset)(struct usb_interface *intf);
+	int (*post_reset)(struct usb_interface *intf);
+
+	const struct usb_device_id *id_table;
+
+	struct usb_dynids dynids;
+	struct usbdrv_wrap drvwrap;
+	unsigned int no_dynamic_id:1;
+	unsigned int supports_autosuspend:1;
+	unsigned int soft_unbind:1;
+};
+#define	to_usb_driver(d) container_of(d, struct usb_driver, drvwrap.driver)
+
+/**
+ * struct usb_device_driver - identifies USB device driver to usbcore
+ * @name: The driver name should be unique among USB drivers,
+ *	and should normally be the same as the module name.
+ * @probe: Called to see if the driver is willing to manage a particular
+ *	device.  If it is, probe returns zero and uses dev_set_drvdata()
+ *	to associate driver-specific data with the device.  If unwilling
+ *	to manage the device, return a negative errno value.
+ * @disconnect: Called when the device is no longer accessible, usually
+ *	because it has been (or is being) disconnected or the driver's
+ *	module is being unloaded.
+ * @suspend: Called when the device is going to be suspended by the system.
+ * @resume: Called when the device is being resumed by the system.
+ * @drvwrap: Driver-model core structure wrapper.
+ * @supports_autosuspend: if set to 0, the USB core will not allow autosuspend
+ *	for devices bound to this driver.
+ *
+ * USB drivers must provide all the fields listed above except drvwrap.
+ */
+struct usb_device_driver {
+	const char *name;
+
+	int (*probe) (struct usb_device *udev);
+	void (*disconnect) (struct usb_device *udev);
+
+	int (*suspend) (struct usb_device *udev, pm_message_t message);
+	int (*resume) (struct usb_device *udev, pm_message_t message);
+	struct usbdrv_wrap drvwrap;
+	unsigned int supports_autosuspend:1;
+};
+#define	to_usb_device_driver(d) container_of(d, struct usb_device_driver, \
+		drvwrap.driver)
+
+extern struct bus_type usb_bus_type;
+
+/**
+ * struct usb_class_driver - identifies a USB driver that wants to use the USB major number
+ * @name: the usb class device name for this driver.  Will show up in sysfs.
+ * @devnode: Callback to provide a naming hint for a possible
+ *	device node to create.
+ * @fops: pointer to the struct file_operations of this driver.
+ * @minor_base: the start of the minor range for this driver.
+ *
+ * This structure is used for the usb_register_dev() and
+ * usb_unregister_dev() functions, to consolidate a number of the
+ * parameters used for them.
+ */
+struct usb_class_driver {
+	char *name;
+	char *(*devnode)(struct device *dev, umode_t *mode);
+	const struct file_operations *fops;
+	int minor_base;
+};
+
+/*
+ * use these in module_init()/module_exit()
+ * and don't forget MODULE_DEVICE_TABLE(usb, ...)
+ */
+extern int usb_register_driver(struct usb_driver *, struct module *,
+			       const char *);
+
+/* use a define to avoid include chaining to get THIS_MODULE & friends */
+#define usb_register(driver) \
+	usb_register_driver(driver, THIS_MODULE, KBUILD_MODNAME)
+
+extern void usb_deregister(struct usb_driver *);
+
+/**
+ * module_usb_driver() - Helper macro for registering a USB driver
+ * @__usb_driver: usb_driver struct
+ *
+ * Helper macro for USB drivers which do not do anything special in module
+ * init/exit. This eliminates a lot of boilerplate. Each module may only
+ * use this macro once, and calling it replaces module_init() and module_exit()
+ */
+#define module_usb_driver(__usb_driver) \
+	module_driver(__usb_driver, usb_register, \
+		       usb_deregister)
+
+extern int usb_register_device_driver(struct usb_device_driver *,
+			struct module *);
+extern void usb_deregister_device_driver(struct usb_device_driver *);
+
+extern int usb_register_dev(struct usb_interface *intf,
+			    struct usb_class_driver *class_driver);
+extern void usb_deregister_dev(struct usb_interface *intf,
+			       struct usb_class_driver *class_driver);
+
+extern int usb_disabled(void);
+
+/* ----------------------------------------------------------------------- */
+
+/*
+ * URB support, for asynchronous request completions
+ */
+
+/*
+ * urb->transfer_flags:
+ *
+ * Note: URB_DIR_IN/OUT is automatically set in usb_submit_urb().
+ */
+#define URB_SHORT_NOT_OK	0x0001	/* report short reads as errors */
+#define URB_ISO_ASAP		0x0002	/* iso-only, urb->start_frame
+					 * ignored */
+#define URB_NO_TRANSFER_DMA_MAP	0x0004	/* urb->transfer_dma valid on submit */
+#define URB_NO_FSBR		0x0020	/* UHCI-specific */
+#define URB_ZERO_PACKET		0x0040	/* Finish bulk OUT with short packet */
+#define URB_NO_INTERRUPT	0x0080	/* HINT: no non-error interrupt
+					 * needed */
+#define URB_FREE_BUFFER		0x0100	/* Free transfer buffer with the URB */
+
+/* The following flags are used internally by usbcore and HCDs */
+#define URB_DIR_IN		0x0200	/* Transfer from device to host */
+#define URB_DIR_OUT		0
+#define URB_DIR_MASK		URB_DIR_IN
+
+#define URB_DMA_MAP_SINGLE	0x00010000	/* Non-scatter-gather mapping */
+#define URB_DMA_MAP_PAGE	0x00020000	/* HCD-unsupported S-G */
+#define URB_DMA_MAP_SG		0x00040000	/* HCD-supported S-G */
+#define URB_MAP_LOCAL		0x00080000	/* HCD-local-memory mapping */
+#define URB_SETUP_MAP_SINGLE	0x00100000	/* Setup packet DMA mapped */
+#define URB_SETUP_MAP_LOCAL	0x00200000	/* HCD-local setup packet */
+#define URB_DMA_SG_COMBINED	0x00400000	/* S-G entries were combined */
+#define URB_ALIGNED_TEMP_BUFFER	0x00800000	/* Temp buffer was alloc'd */
+/*{CharlesTu, 2010.08.26,  for test mode */
+#define URB_HCD_DRIVER_TEST     0xFFFF  /* Do NOT hand back or free this URB */
+/*CharlesTu}*/
+
+struct usb_iso_packet_descriptor {
+	unsigned int offset;
+	unsigned int length;		/* expected length */
+	unsigned int actual_length;
+	int status;
+};
+
+struct urb;
+
+struct usb_anchor {
+	struct list_head urb_list;
+	wait_queue_head_t wait;
+	spinlock_t lock;
+	unsigned int poisoned:1;
+};
+
+static inline void init_usb_anchor(struct usb_anchor *anchor)
+{
+	INIT_LIST_HEAD(&anchor->urb_list);
+	init_waitqueue_head(&anchor->wait);
+	spin_lock_init(&anchor->lock);
+}
+
+typedef void (*usb_complete_t)(struct urb *);
+
+/**
+ * struct urb - USB Request Block
+ * @urb_list: For use by current owner of the URB.
+ * @anchor_list: membership in the list of an anchor
+ * @anchor: to anchor URBs to a common mooring
+ * @ep: Points to the endpoint's data structure.  Will eventually
+ *	replace @pipe.
+ * @pipe: Holds endpoint number, direction, type, and more.
+ *	Create these values with the eight macros available;
+ *	usb_{snd,rcv}TYPEpipe(dev,endpoint), where the TYPE is "ctrl"
+ *	(control), "bulk", "int" (interrupt), or "iso" (isochronous).
+ *	For example usb_sndbulkpipe() or usb_rcvintpipe().  Endpoint
+ *	numbers range from zero to fifteen.  Note that "in" endpoint two
+ *	is a different endpoint (and pipe) from "out" endpoint two.
+ *	The current configuration controls the existence, type, and
+ *	maximum packet size of any given endpoint.
+ * @stream_id: the endpoint's stream ID for bulk streams
+ * @dev: Identifies the USB device to perform the request.
+ * @status: This is read in non-iso completion functions to get the
+ *	status of the particular request.  ISO requests only use it
+ *	to tell whether the URB was unlinked; detailed status for
+ *	each frame is in the fields of the iso_frame-desc.
+ * @transfer_flags: A variety of flags may be used to affect how URB
+ *	submission, unlinking, or operation are handled.  Different
+ *	kinds of URB can use different flags.
+ * @transfer_buffer:  This identifies the buffer to (or from) which the I/O
+ *	request will be performed unless URB_NO_TRANSFER_DMA_MAP is set
+ *	(however, do not leave garbage in transfer_buffer even then).
+ *	This buffer must be suitable for DMA; allocate it with
+ *	kmalloc() or equivalent.  For transfers to "in" endpoints, contents
+ *	of this buffer will be modified.  This buffer is used for the data
+ *	stage of control transfers.
+ * @transfer_dma: When transfer_flags includes URB_NO_TRANSFER_DMA_MAP,
+ *	the device driver is saying that it provided this DMA address,
+ *	which the host controller driver should use in preference to the
+ *	transfer_buffer.
+ * @sg: scatter gather buffer list
+ * @num_mapped_sgs: (internal) number of mapped sg entries
+ * @num_sgs: number of entries in the sg list
+ * @transfer_buffer_length: How big is transfer_buffer.  The transfer may
+ *	be broken up into chunks according to the current maximum packet
+ *	size for the endpoint, which is a function of the configuration
+ *	and is encoded in the pipe.  When the length is zero, neither
+ *	transfer_buffer nor transfer_dma is used.
+ * @actual_length: This is read in non-iso completion functions, and
+ *	it tells how many bytes (out of transfer_buffer_length) were
+ *	transferred.  It will normally be the same as requested, unless
+ *	either an error was reported or a short read was performed.
+ *	The URB_SHORT_NOT_OK transfer flag may be used to make such
+ *	short reads be reported as errors.
+ * @setup_packet: Only used for control transfers, this points to eight bytes
+ *	of setup data.  Control transfers always start by sending this data
+ *	to the device.  Then transfer_buffer is read or written, if needed.
+ * @setup_dma: DMA pointer for the setup packet.  The caller must not use
+ *	this field; setup_packet must point to a valid buffer.
+ * @start_frame: Returns the initial frame for isochronous transfers.
+ * @number_of_packets: Lists the number of ISO transfer buffers.
+ * @interval: Specifies the polling interval for interrupt or isochronous
+ *	transfers.  The units are frames (milliseconds) for full and low
+ *	speed devices, and microframes (1/8 millisecond) for highspeed
+ *	and SuperSpeed devices.
+ * @error_count: Returns the number of ISO transfers that reported errors.
+ * @context: For use in completion functions.  This normally points to
+ *	request-specific driver context.
+ * @complete: Completion handler. This URB is passed as the parameter to the
+ *	completion function.  The completion function may then do what
+ *	it likes with the URB, including resubmitting or freeing it.
+ * @iso_frame_desc: Used to provide arrays of ISO transfer buffers and to
+ *	collect the transfer status for each buffer.
+ *
+ * This structure identifies USB transfer requests.  URBs must be allocated by
+ * calling usb_alloc_urb() and freed with a call to usb_free_urb().
+ * Initialization may be done using various usb_fill_*_urb() functions.  URBs
+ * are submitted using usb_submit_urb(), and pending requests may be canceled
+ * using usb_unlink_urb() or usb_kill_urb().
+ *
+ * Data Transfer Buffers:
+ *
+ * Normally drivers provide I/O buffers allocated with kmalloc() or otherwise
+ * taken from the general page pool.  That is provided by transfer_buffer
+ * (control requests also use setup_packet), and host controller drivers
+ * perform a dma mapping (and unmapping) for each buffer transferred.  Those
+ * mapping operations can be expensive on some platforms (perhaps using a dma
+ * bounce buffer or talking to an IOMMU),
+ * although they're cheap on commodity x86 and ppc hardware.
+ *
+ * Alternatively, drivers may pass the URB_NO_TRANSFER_DMA_MAP transfer flag,
+ * which tells the host controller driver that no such mapping is needed for
+ * the transfer_buffer since
+ * the device driver is DMA-aware.  For example, a device driver might
+ * allocate a DMA buffer with usb_alloc_coherent() or call usb_buffer_map().
+ * When this transfer flag is provided, host controller drivers will
+ * attempt to use the dma address found in the transfer_dma
+ * field rather than determining a dma address themselves.
+ *
+ * Note that transfer_buffer must still be set if the controller
+ * does not support DMA (as indicated by bus.uses_dma) and when talking
+ * to root hub. If you have to trasfer between highmem zone and the device
+ * on such controller, create a bounce buffer or bail out with an error.
+ * If transfer_buffer cannot be set (is in highmem) and the controller is DMA
+ * capable, assign NULL to it, so that usbmon knows not to use the value.
+ * The setup_packet must always be set, so it cannot be located in highmem.
+ *
+ * Initialization:
+ *
+ * All URBs submitted must initialize the dev, pipe, transfer_flags (may be
+ * zero), and complete fields.  All URBs must also initialize
+ * transfer_buffer and transfer_buffer_length.  They may provide the
+ * URB_SHORT_NOT_OK transfer flag, indicating that short reads are
+ * to be treated as errors; that flag is invalid for write requests.
+ *
+ * Bulk URBs may
+ * use the URB_ZERO_PACKET transfer flag, indicating that bulk OUT transfers
+ * should always terminate with a short packet, even if it means adding an
+ * extra zero length packet.
+ *
+ * Control URBs must provide a valid pointer in the setup_packet field.
+ * Unlike the transfer_buffer, the setup_packet may not be mapped for DMA
+ * beforehand.
+ *
+ * Interrupt URBs must provide an interval, saying how often (in milliseconds
+ * or, for highspeed devices, 125 microsecond units)
+ * to poll for transfers.  After the URB has been submitted, the interval
+ * field reflects how the transfer was actually scheduled.
+ * The polling interval may be more frequent than requested.
+ * For example, some controllers have a maximum interval of 32 milliseconds,
+ * while others support intervals of up to 1024 milliseconds.
+ * Isochronous URBs also have transfer intervals.  (Note that for isochronous
+ * endpoints, as well as high speed interrupt endpoints, the encoding of
+ * the transfer interval in the endpoint descriptor is logarithmic.
+ * Device drivers must convert that value to linear units themselves.)
+ *
+ * Isochronous URBs normally use the URB_ISO_ASAP transfer flag, telling
+ * the host controller to schedule the transfer as soon as bandwidth
+ * utilization allows, and then set start_frame to reflect the actual frame
+ * selected during submission.  Otherwise drivers must specify the start_frame
+ * and handle the case where the transfer can't begin then.  However, drivers
+ * won't know how bandwidth is currently allocated, and while they can
+ * find the current frame using usb_get_current_frame_number () they can't
+ * know the range for that frame number.  (Ranges for frame counter values
+ * are HC-specific, and can go from 256 to 65536 frames from "now".)
+ *
+ * Isochronous URBs have a different data transfer model, in part because
+ * the quality of service is only "best effort".  Callers provide specially
+ * allocated URBs, with number_of_packets worth of iso_frame_desc structures
+ * at the end.  Each such packet is an individual ISO transfer.  Isochronous
+ * URBs are normally queued, submitted by drivers to arrange that
+ * transfers are at least double buffered, and then explicitly resubmitted
+ * in completion handlers, so
+ * that data (such as audio or video) streams at as constant a rate as the
+ * host controller scheduler can support.
+ *
+ * Completion Callbacks:
+ *
+ * The completion callback is made in_interrupt(), and one of the first
+ * things that a completion handler should do is check the status field.
+ * The status field is provided for all URBs.  It is used to report
+ * unlinked URBs, and status for all non-ISO transfers.  It should not
+ * be examined before the URB is returned to the completion handler.
+ *
+ * The context field is normally used to link URBs back to the relevant
+ * driver or request state.
+ *
+ * When the completion callback is invoked for non-isochronous URBs, the
+ * actual_length field tells how many bytes were transferred.  This field
+ * is updated even when the URB terminated with an error or was unlinked.
+ *
+ * ISO transfer status is reported in the status and actual_length fields
+ * of the iso_frame_desc array, and the number of errors is reported in
+ * error_count.  Completion callbacks for ISO transfers will normally
+ * (re)submit URBs to ensure a constant transfer rate.
+ *
+ * Note that even fields marked "public" should not be touched by the driver
+ * when the urb is owned by the hcd, that is, since the call to
+ * usb_submit_urb() till the entry into the completion routine.
+ */
+struct urb {
+	/* private: usb core and host controller only fields in the urb */
+	struct kref kref;		/* reference count of the URB */
+	void *hcpriv;			/* private data for host controller */
+	atomic_t use_count;		/* concurrent submissions counter */
+	atomic_t reject;		/* submissions will fail */
+	int unlinked;			/* unlink error code */
+
+	/* public: documented fields in the urb that can be used by drivers */
+	struct list_head urb_list;	/* list head for use by the urb's
+					 * current owner */
+	struct list_head anchor_list;	/* the URB may be anchored */
+	struct usb_anchor *anchor;
+	struct usb_device *dev;		/* (in) pointer to associated device */
+	struct usb_host_endpoint *ep;	/* (internal) pointer to endpoint */
+	unsigned int pipe;		/* (in) pipe information */
+	unsigned int stream_id;		/* (in) stream ID */
+	int status;			/* (return) non-ISO status */
+	unsigned int transfer_flags;	/* (in) URB_SHORT_NOT_OK | ...*/
+	void *transfer_buffer;		/* (in) associated data buffer */
+	dma_addr_t transfer_dma;	/* (in) dma addr for transfer_buffer */
+	struct scatterlist *sg;		/* (in) scatter gather buffer list */
+	int num_mapped_sgs;		/* (internal) mapped sg entries */
+	int num_sgs;			/* (in) number of entries in the sg list */
+	u32 transfer_buffer_length;	/* (in) data buffer length */
+	u32 actual_length;		/* (return) actual transfer length */
+	unsigned char *setup_packet;	/* (in) setup packet (control only) */
+	dma_addr_t setup_dma;		/* (in) dma addr for setup_packet */
+	int start_frame;		/* (modify) start frame (ISO) */
+	int number_of_packets;		/* (in) number of ISO packets */
+	int interval;			/* (modify) transfer interval
+					 * (INT/ISO) */
+	int error_count;		/* (return) number of ISO errors */
+	void *context;			/* (in) context for completion */
+	usb_complete_t complete;	/* (in) completion routine */
+	struct usb_iso_packet_descriptor iso_frame_desc[0];
+					/* (in) ISO ONLY */
+};
+
+/* ----------------------------------------------------------------------- */
+
+/**
+ * usb_fill_control_urb - initializes a control urb
+ * @urb: pointer to the urb to initialize.
+ * @dev: pointer to the struct usb_device for this urb.
+ * @pipe: the endpoint pipe
+ * @setup_packet: pointer to the setup_packet buffer
+ * @transfer_buffer: pointer to the transfer buffer
+ * @buffer_length: length of the transfer buffer
+ * @complete_fn: pointer to the usb_complete_t function
+ * @context: what to set the urb context to.
+ *
+ * Initializes a control urb with the proper information needed to submit
+ * it to a device.
+ */
+static inline void usb_fill_control_urb(struct urb *urb,
+					struct usb_device *dev,
+					unsigned int pipe,
+					unsigned char *setup_packet,
+					void *transfer_buffer,
+					int buffer_length,
+					usb_complete_t complete_fn,
+					void *context)
+{
+	urb->dev = dev;
+	urb->pipe = pipe;
+	urb->setup_packet = setup_packet;
+	urb->transfer_buffer = transfer_buffer;
+	urb->transfer_buffer_length = buffer_length;
+	urb->complete = complete_fn;
+	urb->context = context;
+}
+
+/**
+ * usb_fill_bulk_urb - macro to help initialize a bulk urb
+ * @urb: pointer to the urb to initialize.
+ * @dev: pointer to the struct usb_device for this urb.
+ * @pipe: the endpoint pipe
+ * @transfer_buffer: pointer to the transfer buffer
+ * @buffer_length: length of the transfer buffer
+ * @complete_fn: pointer to the usb_complete_t function
+ * @context: what to set the urb context to.
+ *
+ * Initializes a bulk urb with the proper information needed to submit it
+ * to a device.
+ */
+static inline void usb_fill_bulk_urb(struct urb *urb,
+				     struct usb_device *dev,
+				     unsigned int pipe,
+				     void *transfer_buffer,
+				     int buffer_length,
+				     usb_complete_t complete_fn,
+				     void *context)
+{
+	urb->dev = dev;
+	urb->pipe = pipe;
+	urb->transfer_buffer = transfer_buffer;
+	urb->transfer_buffer_length = buffer_length;
+	urb->complete = complete_fn;
+	urb->context = context;
+}
+
+/**
+ * usb_fill_int_urb - macro to help initialize a interrupt urb
+ * @urb: pointer to the urb to initialize.
+ * @dev: pointer to the struct usb_device for this urb.
+ * @pipe: the endpoint pipe
+ * @transfer_buffer: pointer to the transfer buffer
+ * @buffer_length: length of the transfer buffer
+ * @complete_fn: pointer to the usb_complete_t function
+ * @context: what to set the urb context to.
+ * @interval: what to set the urb interval to, encoded like
+ *	the endpoint descriptor's bInterval value.
+ *
+ * Initializes a interrupt urb with the proper information needed to submit
+ * it to a device.
+ *
+ * Note that High Speed and SuperSpeed interrupt endpoints use a logarithmic
+ * encoding of the endpoint interval, and express polling intervals in
+ * microframes (eight per millisecond) rather than in frames (one per
+ * millisecond).
+ *
+ * Wireless USB also uses the logarithmic encoding, but specifies it in units of
+ * 128us instead of 125us.  For Wireless USB devices, the interval is passed
+ * through to the host controller, rather than being translated into microframe
+ * units.
+ */
+static inline void usb_fill_int_urb(struct urb *urb,
+				    struct usb_device *dev,
+				    unsigned int pipe,
+				    void *transfer_buffer,
+				    int buffer_length,
+				    usb_complete_t complete_fn,
+				    void *context,
+				    int interval)
+{
+	urb->dev = dev;
+	urb->pipe = pipe;
+	urb->transfer_buffer = transfer_buffer;
+	urb->transfer_buffer_length = buffer_length;
+	urb->complete = complete_fn;
+	urb->context = context;
+	if (dev->speed == USB_SPEED_HIGH || dev->speed == USB_SPEED_SUPER)
+		urb->interval = 1 << (interval - 1);
+	else
+		urb->interval = interval;
+	urb->start_frame = -1;
+}
+
+extern void usb_init_urb(struct urb *urb);
+extern struct urb *usb_alloc_urb(int iso_packets, gfp_t mem_flags);
+extern void usb_free_urb(struct urb *urb);
+#define usb_put_urb usb_free_urb
+extern struct urb *usb_get_urb(struct urb *urb);
+extern int usb_submit_urb(struct urb *urb, gfp_t mem_flags);
+extern int usb_unlink_urb(struct urb *urb);
+extern void usb_kill_urb(struct urb *urb);
+extern void usb_poison_urb(struct urb *urb);
+extern void usb_unpoison_urb(struct urb *urb);
+extern void usb_block_urb(struct urb *urb);
+extern void usb_kill_anchored_urbs(struct usb_anchor *anchor);
+extern void usb_poison_anchored_urbs(struct usb_anchor *anchor);
+extern void usb_unpoison_anchored_urbs(struct usb_anchor *anchor);
+extern void usb_unlink_anchored_urbs(struct usb_anchor *anchor);
+extern void usb_anchor_urb(struct urb *urb, struct usb_anchor *anchor);
+extern void usb_unanchor_urb(struct urb *urb);
+extern int usb_wait_anchor_empty_timeout(struct usb_anchor *anchor,
+					 unsigned int timeout);
+extern struct urb *usb_get_from_anchor(struct usb_anchor *anchor);
+extern void usb_scuttle_anchored_urbs(struct usb_anchor *anchor);
+extern int usb_anchor_empty(struct usb_anchor *anchor);
+
+#define usb_unblock_urb	usb_unpoison_urb
+
+/**
+ * usb_urb_dir_in - check if an URB describes an IN transfer
+ * @urb: URB to be checked
+ *
+ * Returns 1 if @urb describes an IN transfer (device-to-host),
+ * otherwise 0.
+ */
+static inline int usb_urb_dir_in(struct urb *urb)
+{
+	return (urb->transfer_flags & URB_DIR_MASK) == URB_DIR_IN;
+}
+
+/**
+ * usb_urb_dir_out - check if an URB describes an OUT transfer
+ * @urb: URB to be checked
+ *
+ * Returns 1 if @urb describes an OUT transfer (host-to-device),
+ * otherwise 0.
+ */
+static inline int usb_urb_dir_out(struct urb *urb)
+{
+	return (urb->transfer_flags & URB_DIR_MASK) == URB_DIR_OUT;
+}
+
+void *usb_alloc_coherent(struct usb_device *dev, size_t size,
+	gfp_t mem_flags, dma_addr_t *dma);
+void usb_free_coherent(struct usb_device *dev, size_t size,
+	void *addr, dma_addr_t dma);
+
+#if 0
+struct urb *usb_buffer_map(struct urb *urb);
+void usb_buffer_dmasync(struct urb *urb);
+void usb_buffer_unmap(struct urb *urb);
+#endif
+
+struct scatterlist;
+int usb_buffer_map_sg(const struct usb_device *dev, int is_in,
+		      struct scatterlist *sg, int nents);
+#if 0
+void usb_buffer_dmasync_sg(const struct usb_device *dev, int is_in,
+			   struct scatterlist *sg, int n_hw_ents);
+#endif
+void usb_buffer_unmap_sg(const struct usb_device *dev, int is_in,
+			 struct scatterlist *sg, int n_hw_ents);
+
+/*-------------------------------------------------------------------*
+ *                         SYNCHRONOUS CALL SUPPORT                  *
+ *-------------------------------------------------------------------*/
+
+extern int usb_control_msg(struct usb_device *dev, unsigned int pipe,
+	__u8 request, __u8 requesttype, __u16 value, __u16 index,
+	void *data, __u16 size, int timeout);
+extern int usb_interrupt_msg(struct usb_device *usb_dev, unsigned int pipe,
+	void *data, int len, int *actual_length, int timeout);
+extern int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe,
+	void *data, int len, int *actual_length,
+	int timeout);
+
+/* wrappers around usb_control_msg() for the most common standard requests */
+extern int usb_get_descriptor(struct usb_device *dev, unsigned char desctype,
+	unsigned char descindex, void *buf, int size);
+extern int usb_get_status(struct usb_device *dev,
+	int type, int target, void *data);
+extern int usb_string(struct usb_device *dev, int index,
+	char *buf, size_t size);
+
+/* wrappers that also update important state inside usbcore */
+extern int usb_clear_halt(struct usb_device *dev, int pipe);
+extern int usb_reset_configuration(struct usb_device *dev);
+extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate);
+extern void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr);
+
+/* this request isn't really synchronous, but it belongs with the others */
+extern int usb_driver_set_configuration(struct usb_device *udev, int config);
+
+/*
+ * timeouts, in milliseconds, used for sending/receiving control messages
+ * they typically complete within a few frames (msec) after they're issued
+ * USB identifies 5 second timeouts, maybe more in a few cases, and a few
+ * slow devices (like some MGE Ellipse UPSes) actually push that limit.
+ */
+#define USB_CTRL_GET_TIMEOUT	5000
+#define USB_CTRL_SET_TIMEOUT	5000
+
+
+/**
+ * struct usb_sg_request - support for scatter/gather I/O
+ * @status: zero indicates success, else negative errno
+ * @bytes: counts bytes transferred.
+ *
+ * These requests are initialized using usb_sg_init(), and then are used
+ * as request handles passed to usb_sg_wait() or usb_sg_cancel().  Most
+ * members of the request object aren't for driver access.
+ *
+ * The status and bytecount values are valid only after usb_sg_wait()
+ * returns.  If the status is zero, then the bytecount matches the total
+ * from the request.
+ *
+ * After an error completion, drivers may need to clear a halt condition
+ * on the endpoint.
+ */
+struct usb_sg_request {
+	int			status;
+	size_t			bytes;
+
+	/* private:
+	 * members below are private to usbcore,
+	 * and are not provided for driver access!
+	 */
+	spinlock_t		lock;
+
+	struct usb_device	*dev;
+	int			pipe;
+
+	int			entries;
+	struct urb		**urbs;
+
+	int			count;
+	struct completion	complete;
+};
+
+int usb_sg_init(
+	struct usb_sg_request	*io,
+	struct usb_device	*dev,
+	unsigned		pipe,
+	unsigned		period,
+	struct scatterlist	*sg,
+	int			nents,
+	size_t			length,
+	gfp_t			mem_flags
+);
+void usb_sg_cancel(struct usb_sg_request *io);
+void usb_sg_wait(struct usb_sg_request *io);
+
+
+/* ----------------------------------------------------------------------- */
+
+/*
+ * For various legacy reasons, Linux has a small cookie that's paired with
+ * a struct usb_device to identify an endpoint queue.  Queue characteristics
+ * are defined by the endpoint's descriptor.  This cookie is called a "pipe",
+ * an unsigned int encoded as:
+ *
+ *  - direction:	bit 7		(0 = Host-to-Device [Out],
+ *					 1 = Device-to-Host [In] ...
+ *					like endpoint bEndpointAddress)
+ *  - device address:	bits 8-14       ... bit positions known to uhci-hcd
+ *  - endpoint:		bits 15-18      ... bit positions known to uhci-hcd
+ *  - pipe type:	bits 30-31	(00 = isochronous, 01 = interrupt,
+ *					 10 = control, 11 = bulk)
+ *
+ * Given the device address and endpoint descriptor, pipes are redundant.
+ */
+
+/* NOTE:  these are not the standard USB_ENDPOINT_XFER_* values!! */
+/* (yet ... they're the values used by usbfs) */
+#define PIPE_ISOCHRONOUS		0
+#define PIPE_INTERRUPT			1
+#define PIPE_CONTROL			2
+#define PIPE_BULK			3
+
+#define usb_pipein(pipe)	((pipe) & USB_DIR_IN)
+#define usb_pipeout(pipe)	(!usb_pipein(pipe))
+
+#define usb_pipedevice(pipe)	(((pipe) >> 8) & 0x7f)
+#define usb_pipeendpoint(pipe)	(((pipe) >> 15) & 0xf)
+
+#define usb_pipetype(pipe)	(((pipe) >> 30) & 3)
+#define usb_pipeisoc(pipe)	(usb_pipetype((pipe)) == PIPE_ISOCHRONOUS)
+#define usb_pipeint(pipe)	(usb_pipetype((pipe)) == PIPE_INTERRUPT)
+#define usb_pipecontrol(pipe)	(usb_pipetype((pipe)) == PIPE_CONTROL)
+#define usb_pipebulk(pipe)	(usb_pipetype((pipe)) == PIPE_BULK)
+
+static inline unsigned int __create_pipe(struct usb_device *dev,
+		unsigned int endpoint)
+{
+	return (dev->devnum << 8) | (endpoint << 15);
+}
+
+/* Create various pipes... */
+#define usb_sndctrlpipe(dev, endpoint)	\
+	((PIPE_CONTROL << 30) | __create_pipe(dev, endpoint))
+#define usb_rcvctrlpipe(dev, endpoint)	\
+	((PIPE_CONTROL << 30) | __create_pipe(dev, endpoint) | USB_DIR_IN)
+#define usb_sndisocpipe(dev, endpoint)	\
+	((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev, endpoint))
+#define usb_rcvisocpipe(dev, endpoint)	\
+	((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev, endpoint) | USB_DIR_IN)
+#define usb_sndbulkpipe(dev, endpoint)	\
+	((PIPE_BULK << 30) | __create_pipe(dev, endpoint))
+#define usb_rcvbulkpipe(dev, endpoint)	\
+	((PIPE_BULK << 30) | __create_pipe(dev, endpoint) | USB_DIR_IN)
+#define usb_sndintpipe(dev, endpoint)	\
+	((PIPE_INTERRUPT << 30) | __create_pipe(dev, endpoint))
+#define usb_rcvintpipe(dev, endpoint)	\
+	((PIPE_INTERRUPT << 30) | __create_pipe(dev, endpoint) | USB_DIR_IN)
+
+static inline struct usb_host_endpoint *
+usb_pipe_endpoint(struct usb_device *dev, unsigned int pipe)
+{
+	struct usb_host_endpoint **eps;
+	eps = usb_pipein(pipe) ? dev->ep_in : dev->ep_out;
+	return eps[usb_pipeendpoint(pipe)];
+}
+
+/*-------------------------------------------------------------------------*/
+
+static inline __u16
+usb_maxpacket(struct usb_device *udev, int pipe, int is_out)
+{
+	struct usb_host_endpoint	*ep;
+	unsigned			epnum = usb_pipeendpoint(pipe);
+
+	if (is_out) {
+		WARN_ON(usb_pipein(pipe));
+		ep = udev->ep_out[epnum];
+	} else {
+		WARN_ON(usb_pipeout(pipe));
+		ep = udev->ep_in[epnum];
+	}
+	if (!ep)
+		return 0;
+
+	/* NOTE:  only 0x07ff bits are for packet size... */
+	return usb_endpoint_maxp(&ep->desc);
+}
+
+/* ----------------------------------------------------------------------- */
+
+/* translate USB error codes to codes user space understands */
+static inline int usb_translate_errors(int error_code)
+{
+	switch (error_code) {
+	case 0:
+	case -ENOMEM:
+	case -ENODEV:
+		return error_code;
+	default:
+		return -EIO;
+	}
+}
+
+/* Events from the usb core */
+#define USB_DEVICE_ADD		0x0001
+#define USB_DEVICE_REMOVE	0x0002
+#define USB_BUS_ADD		0x0003
+#define USB_BUS_REMOVE		0x0004
+extern void usb_register_notify(struct notifier_block *nb);
+extern void usb_unregister_notify(struct notifier_block *nb);
+
+#ifdef DEBUG
+#define dbg(format, arg...)						\
+	printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg)
+#else
+#define dbg(format, arg...)						\
+do {									\
+	if (0)								\
+		printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg); \
+} while (0)
+#endif
+
+#define err(format, arg...)					\
+	printk(KERN_ERR KBUILD_MODNAME ": " format "\n", ##arg)
+
+/* debugfs stuff */
+extern struct dentry *usb_debug_root;
+
+#endif  /* __KERNEL__ */
+
+#endif
diff --git a/include/linux/usb/Kbuild b/include/linux/usb/Kbuild
new file mode 100644
index 00000000..b607f353
--- /dev/null
+++ b/include/linux/usb/Kbuild
@@ -0,0 +1,10 @@
+header-y += audio.h
+header-y += cdc.h
+header-y += ch9.h
+header-y += ch11.h
+header-y += functionfs.h
+header-y += gadgetfs.h
+header-y += midi.h
+header-y += g_printer.h
+header-y += tmc.h
+header-y += video.h
diff --git a/include/linux/usb/association.h b/include/linux/usb/association.h
new file mode 100644
index 00000000..0a4a18b3
--- /dev/null
+++ b/include/linux/usb/association.h
@@ -0,0 +1,150 @@
+/*
+ * Wireless USB - Cable Based Association
+ *
+ * Copyright (C) 2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ */
+#ifndef __LINUX_USB_ASSOCIATION_H
+#define __LINUX_USB_ASSOCIATION_H
+
+
+/*
+ * Association attributes
+ *
+ * Association Models Supplement to WUSB 1.0 T[3-1]
+ *
+ * Each field in the structures has it's ID, it's length and then the
+ * value. This is the actual definition of the field's ID and its
+ * length.
+ */
+struct wusb_am_attr {
+	__u8 id;
+	__u8 len;
+};
+
+/* Different fields defined by the spec */
+#define WUSB_AR_AssociationTypeId	{ .id = cpu_to_le16(0x0000), .len = cpu_to_le16(2) }
+#define WUSB_AR_AssociationSubTypeId	{ .id = cpu_to_le16(0x0001), .len = cpu_to_le16(2) }
+#define WUSB_AR_Length			{ .id = cpu_to_le16(0x0002), .len = cpu_to_le16(4) }
+#define WUSB_AR_AssociationStatus	{ .id = cpu_to_le16(0x0004), .len = cpu_to_le16(4) }
+#define WUSB_AR_LangID			{ .id = cpu_to_le16(0x0008), .len = cpu_to_le16(2) }
+#define WUSB_AR_DeviceFriendlyName	{ .id = cpu_to_le16(0x000b), .len = cpu_to_le16(64) } /* max */
+#define WUSB_AR_HostFriendlyName	{ .id = cpu_to_le16(0x000c), .len = cpu_to_le16(64) } /* max */
+#define WUSB_AR_CHID			{ .id = cpu_to_le16(0x1000), .len = cpu_to_le16(16) }
+#define WUSB_AR_CDID			{ .id = cpu_to_le16(0x1001), .len = cpu_to_le16(16) }
+#define WUSB_AR_ConnectionContext	{ .id = cpu_to_le16(0x1002), .len = cpu_to_le16(48) }
+#define WUSB_AR_BandGroups		{ .id = cpu_to_le16(0x1004), .len = cpu_to_le16(2) }
+
+/* CBAF Control Requests (AMS1.0[T4-1] */
+enum {
+	CBAF_REQ_GET_ASSOCIATION_INFORMATION = 0x01,
+	CBAF_REQ_GET_ASSOCIATION_REQUEST,
+	CBAF_REQ_SET_ASSOCIATION_RESPONSE
+};
+
+/*
+ * CBAF USB-interface defitions
+ *
+ * No altsettings, one optional interrupt endpoint.
+ */
+enum {
+	CBAF_IFACECLASS    = 0xef,
+	CBAF_IFACESUBCLASS = 0x03,
+	CBAF_IFACEPROTOCOL = 0x01,
+};
+
+/* Association Information (AMS1.0[T4-3]) */
+struct wusb_cbaf_assoc_info {
+	__le16 Length;
+	__u8 NumAssociationRequests;
+	__le16 Flags;
+	__u8 AssociationRequestsArray[];
+} __attribute__((packed));
+
+/* Association Request (AMS1.0[T4-4]) */
+struct wusb_cbaf_assoc_request {
+	__u8 AssociationDataIndex;
+	__u8 Reserved;
+	__le16 AssociationTypeId;
+	__le16 AssociationSubTypeId;
+	__le32 AssociationTypeInfoSize;
+} __attribute__((packed));
+
+enum {
+	AR_TYPE_WUSB                    = 0x0001,
+	AR_TYPE_WUSB_RETRIEVE_HOST_INFO = 0x0000,
+	AR_TYPE_WUSB_ASSOCIATE          = 0x0001,
+};
+
+/* Association Attribute header (AMS1.0[3.8]) */
+struct wusb_cbaf_attr_hdr {
+	__le16 id;
+	__le16 len;
+} __attribute__((packed));
+
+/* Host Info (AMS1.0[T4-7]) (yeah, more headers and fields...) */
+struct wusb_cbaf_host_info {
+	struct wusb_cbaf_attr_hdr AssociationTypeId_hdr;
+	__le16 AssociationTypeId;
+	struct wusb_cbaf_attr_hdr AssociationSubTypeId_hdr;
+	__le16 AssociationSubTypeId;
+	struct wusb_cbaf_attr_hdr CHID_hdr;
+	struct wusb_ckhdid CHID;
+	struct wusb_cbaf_attr_hdr LangID_hdr;
+	__le16 LangID;
+	struct wusb_cbaf_attr_hdr HostFriendlyName_hdr;
+	__u8 HostFriendlyName[];
+} __attribute__((packed));
+
+/* Device Info (AMS1.0[T4-8])
+ *
+ * I still don't get this tag'n'header stuff for each goddamn
+ * field...
+ */
+struct wusb_cbaf_device_info {
+	struct wusb_cbaf_attr_hdr Length_hdr;
+	__le32 Length;
+	struct wusb_cbaf_attr_hdr CDID_hdr;
+	struct wusb_ckhdid CDID;
+	struct wusb_cbaf_attr_hdr BandGroups_hdr;
+	__le16 BandGroups;
+	struct wusb_cbaf_attr_hdr LangID_hdr;
+	__le16 LangID;
+	struct wusb_cbaf_attr_hdr DeviceFriendlyName_hdr;
+	__u8 DeviceFriendlyName[];
+} __attribute__((packed));
+
+/* Connection Context; CC_DATA - Success case (AMS1.0[T4-9]) */
+struct wusb_cbaf_cc_data {
+	struct wusb_cbaf_attr_hdr AssociationTypeId_hdr;
+	__le16 AssociationTypeId;
+	struct wusb_cbaf_attr_hdr AssociationSubTypeId_hdr;
+	__le16 AssociationSubTypeId;
+	struct wusb_cbaf_attr_hdr Length_hdr;
+	__le32 Length;
+	struct wusb_cbaf_attr_hdr ConnectionContext_hdr;
+	struct wusb_ckhdid CHID;
+	struct wusb_ckhdid CDID;
+	struct wusb_ckhdid CK;
+	struct wusb_cbaf_attr_hdr BandGroups_hdr;
+	__le16 BandGroups;
+} __attribute__((packed));
+
+/* CC_DATA - Failure case (AMS1.0[T4-10]) */
+struct wusb_cbaf_cc_data_fail {
+	struct wusb_cbaf_attr_hdr AssociationTypeId_hdr;
+	__le16 AssociationTypeId;
+	struct wusb_cbaf_attr_hdr AssociationSubTypeId_hdr;
+	__le16 AssociationSubTypeId;
+	struct wusb_cbaf_attr_hdr Length_hdr;
+	__le16 Length;
+	struct wusb_cbaf_attr_hdr AssociationStatus_hdr;
+	__u32 AssociationStatus;
+} __attribute__((packed));
+
+#endif	/* __LINUX_USB_ASSOCIATION_H */
diff --git a/include/linux/usb/atmel_usba_udc.h b/include/linux/usb/atmel_usba_udc.h
new file mode 100644
index 00000000..ba99af27
--- /dev/null
+++ b/include/linux/usb/atmel_usba_udc.h
@@ -0,0 +1,23 @@
+/*
+ * Platform data definitions for Atmel USBA gadget driver.
+ */
+#ifndef __LINUX_USB_USBA_H
+#define __LINUX_USB_USBA_H
+
+struct usba_ep_data {
+	char	*name;
+	int	index;
+	int	fifo_size;
+	int	nr_banks;
+	int	can_dma;
+	int	can_isoc;
+};
+
+struct usba_platform_data {
+	int			vbus_pin;
+	int			vbus_pin_inverted;
+	int			num_ep;
+	struct usba_ep_data	ep[0];
+};
+
+#endif /* __LINUX_USB_USBA_H */
diff --git a/include/linux/usb/audio-v2.h b/include/linux/usb/audio-v2.h
new file mode 100644
index 00000000..ed130531
--- /dev/null
+++ b/include/linux/usb/audio-v2.h
@@ -0,0 +1,459 @@
+/*
+ * Copyright (c) 2010 Daniel Mack <daniel@caiaq.de>
+ *
+ * This software is distributed under the terms of the GNU General Public
+ * License ("GPL") version 2, as published by the Free Software Foundation.
+ *
+ * This file holds USB constants and structures defined
+ * by the USB Device Class Definition for Audio Devices in version 2.0.
+ * Comments below reference relevant sections of the documents contained
+ * in http://www.usb.org/developers/devclass_docs/Audio2.0_final.zip
+ */
+
+#ifndef __LINUX_USB_AUDIO_V2_H
+#define __LINUX_USB_AUDIO_V2_H
+
+#include <linux/types.h>
+
+/* v1.0 and v2.0 of this standard have many things in common. For the rest
+ * of the definitions, please refer to audio.h */
+
+/*
+ * bmControl field decoders
+ *
+ * From the USB Audio spec v2.0:
+ *
+ *   bmaControls() is a (ch+1)-element array of 4-byte bitmaps,
+ *   each containing a set of bit pairs. If a Control is present,
+ *   it must be Host readable. If a certain Control is not
+ *   present then the bit pair must be set to 0b00.
+ *   If a Control is present but read-only, the bit pair must be
+ *   set to 0b01. If a Control is also Host programmable, the bit
+ *   pair must be set to 0b11. The value 0b10 is not allowed.
+ *
+ */
+
+static inline bool uac2_control_is_readable(u32 bmControls, u8 control)
+{
+	return (bmControls >> (control * 2)) & 0x1;
+}
+
+static inline bool uac2_control_is_writeable(u32 bmControls, u8 control)
+{
+	return (bmControls >> (control * 2)) & 0x2;
+}
+
+/* 4.7.2 Class-Specific AC Interface Descriptor */
+struct uac2_ac_header_descriptor {
+	__u8  bLength;			/* 9 */
+	__u8  bDescriptorType;		/* USB_DT_CS_INTERFACE */
+	__u8  bDescriptorSubtype;	/* UAC_MS_HEADER */
+	__le16 bcdADC;			/* 0x0200 */
+	__u8  bCategory;
+	__le16 wTotalLength;		/* includes Unit and Terminal desc. */
+	__u8  bmControls;
+} __packed;
+
+/* 2.3.1.6 Type I Format Type Descriptor (Frmts20 final.pdf)*/
+struct uac2_format_type_i_descriptor {
+	__u8  bLength;			/* in bytes: 6 */
+	__u8  bDescriptorType;		/* USB_DT_CS_INTERFACE */
+	__u8  bDescriptorSubtype;	/* FORMAT_TYPE */
+	__u8  bFormatType;		/* FORMAT_TYPE_1 */
+	__u8  bSubslotSize;		/* {1,2,3,4} */
+	__u8  bBitResolution;
+} __packed;
+
+/* 4.7.2.1 Clock Source Descriptor */
+
+struct uac_clock_source_descriptor {
+	__u8 bLength;
+	__u8 bDescriptorType;
+	__u8 bDescriptorSubtype;
+	__u8 bClockID;
+	__u8 bmAttributes;
+	__u8 bmControls;
+	__u8 bAssocTerminal;
+	__u8 iClockSource;
+} __attribute__((packed));
+
+/* bmAttribute fields */
+#define UAC_CLOCK_SOURCE_TYPE_EXT	0x0
+#define UAC_CLOCK_SOURCE_TYPE_INT_FIXED	0x1
+#define UAC_CLOCK_SOURCE_TYPE_INT_VAR	0x2
+#define UAC_CLOCK_SOURCE_TYPE_INT_PROG	0x3
+#define UAC_CLOCK_SOURCE_SYNCED_TO_SOF	(1 << 2)
+
+/* 4.7.2.2 Clock Source Descriptor */
+
+struct uac_clock_selector_descriptor {
+	__u8 bLength;
+	__u8 bDescriptorType;
+	__u8 bDescriptorSubtype;
+	__u8 bClockID;
+	__u8 bNrInPins;
+	__u8 baCSourceID[];
+	/* bmControls, bAssocTerminal and iClockSource omitted */
+} __attribute__((packed));
+
+/* 4.7.2.3 Clock Multiplier Descriptor */
+
+struct uac_clock_multiplier_descriptor {
+	__u8 bLength;
+	__u8 bDescriptorType;
+	__u8 bDescriptorSubtype;
+	__u8 bClockID;
+	__u8 bCSourceID;
+	__u8 bmControls;
+	__u8 iClockMultiplier;
+} __attribute__((packed));
+
+/* 4.7.2.4 Input terminal descriptor */
+
+struct uac2_input_terminal_descriptor {
+	__u8 bLength;
+	__u8 bDescriptorType;
+	__u8 bDescriptorSubtype;
+	__u8 bTerminalID;
+	__u16 wTerminalType;
+	__u8 bAssocTerminal;
+	__u8 bCSourceID;
+	__u8 bNrChannels;
+	__u32 bmChannelConfig;
+	__u8 iChannelNames;
+	__u16 bmControls;
+	__u8 iTerminal;
+} __attribute__((packed));
+
+/* 4.7.2.5 Output terminal descriptor */
+
+struct uac2_output_terminal_descriptor {
+	__u8 bLength;
+	__u8 bDescriptorType;
+	__u8 bDescriptorSubtype;
+	__u8 bTerminalID;
+	__u16 wTerminalType;
+	__u8 bAssocTerminal;
+	__u8 bSourceID;
+	__u8 bCSourceID;
+	__u16 bmControls;
+	__u8 iTerminal;
+} __attribute__((packed));
+
+
+
+/* 4.7.2.8 Feature Unit Descriptor */
+
+struct uac2_feature_unit_descriptor {
+	__u8 bLength;
+	__u8 bDescriptorType;
+	__u8 bDescriptorSubtype;
+	__u8 bUnitID;
+	__u8 bSourceID;
+	/* bmaControls is actually u32,
+	 * but u8 is needed for the hybrid parser */
+	__u8 bmaControls[0]; /* variable length */
+} __attribute__((packed));
+
+/* 4.9.2 Class-Specific AS Interface Descriptor */
+
+struct uac2_as_header_descriptor {
+	__u8 bLength;
+	__u8 bDescriptorType;
+	__u8 bDescriptorSubtype;
+	__u8 bTerminalLink;
+	__u8 bmControls;
+	__u8 bFormatType;
+	__u32 bmFormats;
+	__u8 bNrChannels;
+	__u32 bmChannelConfig;
+	__u8 iChannelNames;
+} __attribute__((packed));
+
+/* 4.10.1.2 Class-Specific AS Isochronous Audio Data Endpoint Descriptor */
+
+struct uac2_iso_endpoint_descriptor {
+	__u8  bLength;			/* in bytes: 8 */
+	__u8  bDescriptorType;		/* USB_DT_CS_ENDPOINT */
+	__u8  bDescriptorSubtype;	/* EP_GENERAL */
+	__u8  bmAttributes;
+	__u8  bmControls;
+	__u8  bLockDelayUnits;
+	__le16 wLockDelay;
+} __attribute__((packed));
+
+#define UAC2_CONTROL_PITCH		(3 << 0)
+#define UAC2_CONTROL_DATA_OVERRUN	(3 << 2)
+#define UAC2_CONTROL_DATA_UNDERRUN	(3 << 4)
+
+/* 6.1 Interrupt Data Message */
+
+#define UAC2_INTERRUPT_DATA_MSG_VENDOR	(1 << 0)
+#define UAC2_INTERRUPT_DATA_MSG_EP	(1 << 1)
+
+struct uac2_interrupt_data_msg {
+	__u8 bInfo;
+	__u8 bAttribute;
+	__le16 wValue;
+	__le16 wIndex;
+} __attribute__((packed));
+
+/* A.7 Audio Function Category Codes */
+#define UAC2_FUNCTION_SUBCLASS_UNDEFINED	0x00
+#define UAC2_FUNCTION_DESKTOP_SPEAKER		0x01
+#define UAC2_FUNCTION_HOME_THEATER		0x02
+#define UAC2_FUNCTION_MICROPHONE		0x03
+#define UAC2_FUNCTION_HEADSET			0x04
+#define UAC2_FUNCTION_TELEPHONE			0x05
+#define UAC2_FUNCTION_CONVERTER			0x06
+#define UAC2_FUNCTION_SOUND_RECORDER		0x07
+#define UAC2_FUNCTION_IO_BOX			0x08
+#define UAC2_FUNCTION_MUSICAL_INSTRUMENT	0x09
+#define UAC2_FUNCTION_PRO_AUDIO			0x0a
+#define UAC2_FUNCTION_AUDIO_VIDEO		0x0b
+#define UAC2_FUNCTION_CONTROL_PANEL		0x0c
+#define UAC2_FUNCTION_OTHER			0xff
+
+/* A.9 Audio Class-Specific AC Interface Descriptor Subtypes */
+/* see audio.h for the rest, which is identical to v1 */
+#define UAC2_EFFECT_UNIT			0x07
+#define UAC2_PROCESSING_UNIT_V2		0x08
+#define UAC2_EXTENSION_UNIT_V2		0x09
+#define UAC2_CLOCK_SOURCE		0x0a
+#define UAC2_CLOCK_SELECTOR		0x0b
+#define UAC2_CLOCK_MULTIPLIER		0x0c
+#define UAC2_SAMPLE_RATE_CONVERTER	0x0d
+
+/* A.10 Audio Class-Specific AS Interface Descriptor Subtypes */
+/* see audio.h for the rest, which is identical to v1 */
+#define UAC2_ENCODER			0x03
+#define UAC2_DECODER			0x04
+
+/* A.11 Effect Unit Effect Types */
+#define UAC2_EFFECT_UNDEFINED		0x00
+#define UAC2_EFFECT_PARAM_EQ		0x01
+#define UAC2_EFFECT_REVERB		0x02
+#define UAC2_EFFECT_MOD_DELAY		0x03
+#define UAC2_EFFECT_DYN_RANGE_COMP	0x04
+
+/* A.12 Processing Unit Process Types */
+#define UAC2_PROCESS_UNDEFINED		0x00
+#define UAC2_PROCESS_UP_DOWNMIX		0x01
+#define UAC2_PROCESS_DOLBY_PROLOCIC	0x02
+#define UAC2_PROCESS_STEREO_EXTENDER	0x03
+
+/* A.14 Audio Class-Specific Request Codes */
+#define UAC2_CS_CUR			0x01
+#define UAC2_CS_RANGE			0x02
+#define UAC2_CS_MEM			0x03
+
+/* A.15 Encoder Type Codes */
+#define UAC2_ENCODER_UNDEFINED		0x00
+#define UAC2_ENCODER_OTHER		0x01
+#define UAC2_ENCODER_MPEG		0x02
+#define UAC2_ENCODER_AC3		0x03
+#define UAC2_ENCODER_WMA		0x04
+#define UAC2_ENCODER_DTS		0x05
+
+/* A.16 Decoder Type Codes */
+#define UAC2_DECODER_UNDEFINED		0x00
+#define UAC2_DECODER_OTHER		0x01
+#define UAC2_DECODER_MPEG		0x02
+#define UAC2_DECODER_AC3		0x03
+#define UAC2_DECODER_WMA		0x04
+#define UAC2_DECODER_DTS		0x05
+
+/* A.17.1 Clock Source Control Selectors */
+#define UAC2_CS_UNDEFINED		0x00
+#define UAC2_CS_CONTROL_SAM_FREQ	0x01
+#define UAC2_CS_CONTROL_CLOCK_VALID	0x02
+
+/* A.17.2 Clock Selector Control Selectors */
+#define UAC2_CX_UNDEFINED		0x00
+#define UAC2_CX_CLOCK_SELECTOR		0x01
+
+/* A.17.3 Clock Multiplier Control Selectors */
+#define UAC2_CM_UNDEFINED		0x00
+#define UAC2_CM_NUMERATOR		0x01
+#define UAC2_CM_DENOMINTATOR		0x02
+
+/* A.17.4 Terminal Control Selectors */
+#define UAC2_TE_UNDEFINED		0x00
+#define UAC2_TE_COPY_PROTECT		0x01
+#define UAC2_TE_CONNECTOR		0x02
+#define UAC2_TE_OVERLOAD		0x03
+#define UAC2_TE_CLUSTER			0x04
+#define UAC2_TE_UNDERFLOW		0x05
+#define UAC2_TE_OVERFLOW		0x06
+#define UAC2_TE_LATENCY			0x07
+
+/* A.17.5 Mixer Control Selectors */
+#define UAC2_MU_UNDEFINED		0x00
+#define UAC2_MU_MIXER			0x01
+#define UAC2_MU_CLUSTER			0x02
+#define UAC2_MU_UNDERFLOW		0x03
+#define UAC2_MU_OVERFLOW		0x04
+#define UAC2_MU_LATENCY			0x05
+
+/* A.17.6 Selector Control Selectors */
+#define UAC2_SU_UNDEFINED		0x00
+#define UAC2_SU_SELECTOR		0x01
+#define UAC2_SU_LATENCY			0x02
+
+/* A.17.7 Feature Unit Control Selectors */
+/* see audio.h for the rest, which is identical to v1 */
+#define UAC2_FU_INPUT_GAIN		0x0b
+#define UAC2_FU_INPUT_GAIN_PAD		0x0c
+#define UAC2_FU_PHASE_INVERTER		0x0d
+#define UAC2_FU_UNDERFLOW		0x0e
+#define UAC2_FU_OVERFLOW		0x0f
+#define UAC2_FU_LATENCY			0x10
+
+/* A.17.8.1 Parametric Equalizer Section Effect Unit Control Selectors */
+#define UAC2_PE_UNDEFINED		0x00
+#define UAC2_PE_ENABLE			0x01
+#define UAC2_PE_CENTERFREQ		0x02
+#define UAC2_PE_QFACTOR			0x03
+#define UAC2_PE_GAIN			0x04
+#define UAC2_PE_UNDERFLOW		0x05
+#define UAC2_PE_OVERFLOW		0x06
+#define UAC2_PE_LATENCY			0x07
+
+/* A.17.8.2 Reverberation Effect Unit Control Selectors */
+#define UAC2_RV_UNDEFINED		0x00
+#define UAC2_RV_ENABLE			0x01
+#define UAC2_RV_TYPE			0x02
+#define UAC2_RV_LEVEL			0x03
+#define UAC2_RV_TIME			0x04
+#define UAC2_RV_FEEDBACK		0x05
+#define UAC2_RV_PREDELAY		0x06
+#define UAC2_RV_DENSITY			0x07
+#define UAC2_RV_HIFREQ_ROLLOFF		0x08
+#define UAC2_RV_UNDERFLOW		0x09
+#define UAC2_RV_OVERFLOW		0x0a
+#define UAC2_RV_LATENCY			0x0b
+
+/* A.17.8.3 Modulation Delay Effect Control Selectors */
+#define UAC2_MD_UNDEFINED		0x00
+#define UAC2_MD_ENABLE			0x01
+#define UAC2_MD_BALANCE			0x02
+#define UAC2_MD_RATE			0x03
+#define UAC2_MD_DEPTH			0x04
+#define UAC2_MD_TIME			0x05
+#define UAC2_MD_FEEDBACK		0x06
+#define UAC2_MD_UNDERFLOW		0x07
+#define UAC2_MD_OVERFLOW		0x08
+#define UAC2_MD_LATENCY			0x09
+
+/* A.17.8.4 Dynamic Range Compressor Effect Unit Control Selectors */
+#define UAC2_DR_UNDEFINED		0x00
+#define UAC2_DR_ENABLE			0x01
+#define UAC2_DR_COMPRESSION_RATE	0x02
+#define UAC2_DR_MAXAMPL			0x03
+#define UAC2_DR_THRESHOLD		0x04
+#define UAC2_DR_ATTACK_TIME		0x05
+#define UAC2_DR_RELEASE_TIME		0x06
+#define UAC2_DR_UNDEFLOW		0x07
+#define UAC2_DR_OVERFLOW		0x08
+#define UAC2_DR_LATENCY			0x09
+
+/* A.17.9.1 Up/Down-mix Processing Unit Control Selectors */
+#define UAC2_UD_UNDEFINED		0x00
+#define UAC2_UD_ENABLE			0x01
+#define UAC2_UD_MODE_SELECT		0x02
+#define UAC2_UD_CLUSTER			0x03
+#define UAC2_UD_UNDERFLOW		0x04
+#define UAC2_UD_OVERFLOW		0x05
+#define UAC2_UD_LATENCY			0x06
+
+/* A.17.9.2 Dolby Prologic[tm] Processing Unit Control Selectors */
+#define UAC2_DP_UNDEFINED		0x00
+#define UAC2_DP_ENABLE			0x01
+#define UAC2_DP_MODE_SELECT		0x02
+#define UAC2_DP_CLUSTER			0x03
+#define UAC2_DP_UNDERFFLOW		0x04
+#define UAC2_DP_OVERFLOW		0x05
+#define UAC2_DP_LATENCY			0x06
+
+/* A.17.9.3 Stereo Expander Processing Unit Control Selectors */
+#define UAC2_ST_EXT_UNDEFINED		0x00
+#define UAC2_ST_EXT_ENABLE		0x01
+#define UAC2_ST_EXT_WIDTH		0x02
+#define UAC2_ST_EXT_UNDEFLOW		0x03
+#define UAC2_ST_EXT_OVERFLOW		0x04
+#define UAC2_ST_EXT_LATENCY		0x05
+
+/* A.17.10 Extension Unit Control Selectors */
+#define UAC2_XU_UNDEFINED		0x00
+#define UAC2_XU_ENABLE			0x01
+#define UAC2_XU_CLUSTER			0x02
+#define UAC2_XU_UNDERFLOW		0x03
+#define UAC2_XU_OVERFLOW		0x04
+#define UAC2_XU_LATENCY			0x05
+
+/* A.17.11 AudioStreaming Interface Control Selectors */
+#define UAC2_AS_UNDEFINED		0x00
+#define UAC2_AS_ACT_ALT_SETTING		0x01
+#define UAC2_AS_VAL_ALT_SETTINGS	0x02
+#define UAC2_AS_AUDIO_DATA_FORMAT	0x03
+
+/* A.17.12 Encoder Control Selectors */
+#define UAC2_EN_UNDEFINED		0x00
+#define UAC2_EN_BIT_RATE		0x01
+#define UAC2_EN_QUALITY			0x02
+#define UAC2_EN_VBR			0x03
+#define UAC2_EN_TYPE			0x04
+#define UAC2_EN_UNDERFLOW		0x05
+#define UAC2_EN_OVERFLOW		0x06
+#define UAC2_EN_ENCODER_ERROR		0x07
+#define UAC2_EN_PARAM1			0x08
+#define UAC2_EN_PARAM2			0x09
+#define UAC2_EN_PARAM3			0x0a
+#define UAC2_EN_PARAM4			0x0b
+#define UAC2_EN_PARAM5			0x0c
+#define UAC2_EN_PARAM6			0x0d
+#define UAC2_EN_PARAM7			0x0e
+#define UAC2_EN_PARAM8			0x0f
+
+/* A.17.13.1 MPEG Decoder Control Selectors */
+#define UAC2_MPEG_UNDEFINED		0x00
+#define UAC2_MPEG_DUAL_CHANNEL		0x01
+#define UAC2_MPEG_SECOND_STEREO		0x02
+#define UAC2_MPEG_MULTILINGUAL		0x03
+#define UAC2_MPEG_DYN_RANGE		0x04
+#define UAC2_MPEG_SCALING		0x05
+#define UAC2_MPEG_HILO_SCALING		0x06
+#define UAC2_MPEG_UNDERFLOW		0x07
+#define UAC2_MPEG_OVERFLOW		0x08
+#define UAC2_MPEG_DECODER_ERROR		0x09
+
+/* A17.13.2 AC3 Decoder Control Selectors */
+#define UAC2_AC3_UNDEFINED		0x00
+#define UAC2_AC3_MODE			0x01
+#define UAC2_AC3_DYN_RANGE		0x02
+#define UAC2_AC3_SCALING		0x03
+#define UAC2_AC3_HILO_SCALING		0x04
+#define UAC2_AC3_UNDERFLOW		0x05
+#define UAC2_AC3_OVERFLOW		0x06
+#define UAC2_AC3_DECODER_ERROR		0x07
+
+/* A17.13.3 WMA Decoder Control Selectors */
+#define UAC2_WMA_UNDEFINED		0x00
+#define UAC2_WMA_UNDERFLOW		0x01
+#define UAC2_WMA_OVERFLOW		0x02
+#define UAC2_WMA_DECODER_ERROR		0x03
+
+/* A17.13.4 DTS Decoder Control Selectors */
+#define UAC2_DTS_UNDEFINED		0x00
+#define UAC2_DTS_UNDERFLOW		0x01
+#define UAC2_DTS_OVERFLOW		0x02
+#define UAC2_DTS_DECODER_ERROR		0x03
+
+/* A17.14 Endpoint Control Selectors */
+#define UAC2_EP_CS_UNDEFINED		0x00
+#define UAC2_EP_CS_PITCH		0x01
+#define UAC2_EP_CS_DATA_OVERRUN		0x02
+#define UAC2_EP_CS_DATA_UNDERRUN	0x03
+
+#endif /* __LINUX_USB_AUDIO_V2_H */
+
diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h
new file mode 100644
index 00000000..a54b8255
--- /dev/null
+++ b/include/linux/usb/audio.h
@@ -0,0 +1,566 @@
+/*
+ * <linux/usb/audio.h> -- USB Audio definitions.
+ *
+ * Copyright (C) 2006 Thumtronics Pty Ltd.
+ * Developed for Thumtronics by Grey Innovation
+ * Ben Williamson <ben.williamson@greyinnovation.com>
+ *
+ * This software is distributed under the terms of the GNU General Public
+ * License ("GPL") version 2, as published by the Free Software Foundation.
+ *
+ * This file holds USB constants and structures defined
+ * by the USB Device Class Definition for Audio Devices.
+ * Comments below reference relevant sections of that document:
+ *
+ * http://www.usb.org/developers/devclass_docs/audio10.pdf
+ *
+ * Types and defines in this file are either specific to version 1.0 of
+ * this standard or common for newer versions.
+ */
+
+#ifndef __LINUX_USB_AUDIO_H
+#define __LINUX_USB_AUDIO_H
+
+#include <linux/types.h>
+
+/* bInterfaceProtocol values to denote the version of the standard used */
+#define UAC_VERSION_1			0x00
+#define UAC_VERSION_2			0x20
+
+/* A.2 Audio Interface Subclass Codes */
+#define USB_SUBCLASS_AUDIOCONTROL	0x01
+#define USB_SUBCLASS_AUDIOSTREAMING	0x02
+#define USB_SUBCLASS_MIDISTREAMING	0x03
+
+/* A.5 Audio Class-Specific AC Interface Descriptor Subtypes */
+#define UAC_HEADER			0x01
+#define UAC_INPUT_TERMINAL		0x02
+#define UAC_OUTPUT_TERMINAL		0x03
+#define UAC_MIXER_UNIT			0x04
+#define UAC_SELECTOR_UNIT		0x05
+#define UAC_FEATURE_UNIT		0x06
+#define UAC1_PROCESSING_UNIT		0x07
+#define UAC1_EXTENSION_UNIT		0x08
+
+/* A.6 Audio Class-Specific AS Interface Descriptor Subtypes */
+#define UAC_AS_GENERAL			0x01
+#define UAC_FORMAT_TYPE			0x02
+#define UAC_FORMAT_SPECIFIC		0x03
+
+/* A.7 Processing Unit Process Types */
+#define UAC_PROCESS_UNDEFINED		0x00
+#define UAC_PROCESS_UP_DOWNMIX		0x01
+#define UAC_PROCESS_DOLBY_PROLOGIC	0x02
+#define UAC_PROCESS_STEREO_EXTENDER	0x03
+#define UAC_PROCESS_REVERB		0x04
+#define UAC_PROCESS_CHORUS		0x05
+#define UAC_PROCESS_DYN_RANGE_COMP	0x06
+
+/* A.8 Audio Class-Specific Endpoint Descriptor Subtypes */
+#define UAC_EP_GENERAL			0x01
+
+/* A.9 Audio Class-Specific Request Codes */
+#define UAC_SET_			0x00
+#define UAC_GET_			0x80
+
+#define UAC__CUR			0x1
+#define UAC__MIN			0x2
+#define UAC__MAX			0x3
+#define UAC__RES			0x4
+#define UAC__MEM			0x5
+
+#define UAC_SET_CUR			(UAC_SET_ | UAC__CUR)
+#define UAC_GET_CUR			(UAC_GET_ | UAC__CUR)
+#define UAC_SET_MIN			(UAC_SET_ | UAC__MIN)
+#define UAC_GET_MIN			(UAC_GET_ | UAC__MIN)
+#define UAC_SET_MAX			(UAC_SET_ | UAC__MAX)
+#define UAC_GET_MAX			(UAC_GET_ | UAC__MAX)
+#define UAC_SET_RES			(UAC_SET_ | UAC__RES)
+#define UAC_GET_RES			(UAC_GET_ | UAC__RES)
+#define UAC_SET_MEM			(UAC_SET_ | UAC__MEM)
+#define UAC_GET_MEM			(UAC_GET_ | UAC__MEM)
+
+#define UAC_GET_STAT			0xff
+
+/* A.10 Control Selector Codes */
+
+/* A.10.1 Terminal Control Selectors */
+#define UAC_TERM_COPY_PROTECT		0x01
+
+/* A.10.2 Feature Unit Control Selectors */
+#define UAC_FU_MUTE			0x01
+#define UAC_FU_VOLUME			0x02
+#define UAC_FU_BASS			0x03
+#define UAC_FU_MID			0x04
+#define UAC_FU_TREBLE			0x05
+#define UAC_FU_GRAPHIC_EQUALIZER	0x06
+#define UAC_FU_AUTOMATIC_GAIN		0x07
+#define UAC_FU_DELAY			0x08
+#define UAC_FU_BASS_BOOST		0x09
+#define UAC_FU_LOUDNESS			0x0a
+
+#define UAC_CONTROL_BIT(CS)	(1 << ((CS) - 1))
+
+/* A.10.3.1 Up/Down-mix Processing Unit Controls Selectors */
+#define UAC_UD_ENABLE			0x01
+#define UAC_UD_MODE_SELECT		0x02
+
+/* A.10.3.2 Dolby Prologic (tm) Processing Unit Controls Selectors */
+#define UAC_DP_ENABLE			0x01
+#define UAC_DP_MODE_SELECT		0x02
+
+/* A.10.3.3 3D Stereo Extender Processing Unit Control Selectors */
+#define UAC_3D_ENABLE			0x01
+#define UAC_3D_SPACE			0x02
+
+/* A.10.3.4 Reverberation Processing Unit Control Selectors */
+#define UAC_REVERB_ENABLE		0x01
+#define UAC_REVERB_LEVEL		0x02
+#define UAC_REVERB_TIME			0x03
+#define UAC_REVERB_FEEDBACK		0x04
+
+/* A.10.3.5 Chorus Processing Unit Control Selectors */
+#define UAC_CHORUS_ENABLE		0x01
+#define UAC_CHORUS_LEVEL		0x02
+#define UAC_CHORUS_RATE			0x03
+#define UAC_CHORUS_DEPTH		0x04
+
+/* A.10.3.6 Dynamic Range Compressor Unit Control Selectors */
+#define UAC_DCR_ENABLE			0x01
+#define UAC_DCR_RATE			0x02
+#define UAC_DCR_MAXAMPL			0x03
+#define UAC_DCR_THRESHOLD		0x04
+#define UAC_DCR_ATTACK_TIME		0x05
+#define UAC_DCR_RELEASE_TIME		0x06
+
+/* A.10.4 Extension Unit Control Selectors */
+#define UAC_XU_ENABLE			0x01
+
+/* MIDI - A.1 MS Class-Specific Interface Descriptor Subtypes */
+#define UAC_MS_HEADER			0x01
+#define UAC_MIDI_IN_JACK		0x02
+#define UAC_MIDI_OUT_JACK		0x03
+
+/* MIDI - A.1 MS Class-Specific Endpoint Descriptor Subtypes */
+#define UAC_MS_GENERAL			0x01
+
+/* Terminals - 2.1 USB Terminal Types */
+#define UAC_TERMINAL_UNDEFINED		0x100
+#define UAC_TERMINAL_STREAMING		0x101
+#define UAC_TERMINAL_VENDOR_SPEC	0x1FF
+
+/* Terminal Control Selectors */
+/* 4.3.2  Class-Specific AC Interface Descriptor */
+struct uac1_ac_header_descriptor {
+	__u8  bLength;			/* 8 + n */
+	__u8  bDescriptorType;		/* USB_DT_CS_INTERFACE */
+	__u8  bDescriptorSubtype;	/* UAC_MS_HEADER */
+	__le16 bcdADC;			/* 0x0100 */
+	__le16 wTotalLength;		/* includes Unit and Terminal desc. */
+	__u8  bInCollection;		/* n */
+	__u8  baInterfaceNr[];		/* [n] */
+} __attribute__ ((packed));
+
+#define UAC_DT_AC_HEADER_SIZE(n)	(8 + (n))
+
+/* As above, but more useful for defining your own descriptors: */
+#define DECLARE_UAC_AC_HEADER_DESCRIPTOR(n)			\
+struct uac1_ac_header_descriptor_##n {			\
+	__u8  bLength;						\
+	__u8  bDescriptorType;					\
+	__u8  bDescriptorSubtype;				\
+	__le16 bcdADC;						\
+	__le16 wTotalLength;					\
+	__u8  bInCollection;					\
+	__u8  baInterfaceNr[n];					\
+} __attribute__ ((packed))
+
+/* 4.3.2.1 Input Terminal Descriptor */
+struct uac_input_terminal_descriptor {
+	__u8  bLength;			/* in bytes: 12 */
+	__u8  bDescriptorType;		/* CS_INTERFACE descriptor type */
+	__u8  bDescriptorSubtype;	/* INPUT_TERMINAL descriptor subtype */
+	__u8  bTerminalID;		/* Constant uniquely terminal ID */
+	__le16 wTerminalType;		/* USB Audio Terminal Types */
+	__u8  bAssocTerminal;		/* ID of the Output Terminal associated */
+	__u8  bNrChannels;		/* Number of logical output channels */
+	__le16 wChannelConfig;
+	__u8  iChannelNames;
+	__u8  iTerminal;
+} __attribute__ ((packed));
+
+#define UAC_DT_INPUT_TERMINAL_SIZE			12
+
+/* Terminals - 2.2 Input Terminal Types */
+#define UAC_INPUT_TERMINAL_UNDEFINED			0x200
+#define UAC_INPUT_TERMINAL_MICROPHONE			0x201
+#define UAC_INPUT_TERMINAL_DESKTOP_MICROPHONE		0x202
+#define UAC_INPUT_TERMINAL_PERSONAL_MICROPHONE		0x203
+#define UAC_INPUT_TERMINAL_OMNI_DIR_MICROPHONE		0x204
+#define UAC_INPUT_TERMINAL_MICROPHONE_ARRAY		0x205
+#define UAC_INPUT_TERMINAL_PROC_MICROPHONE_ARRAY	0x206
+
+/* Terminals - control selectors */
+
+#define UAC_TERMINAL_CS_COPY_PROTECT_CONTROL		0x01
+
+/* 4.3.2.2 Output Terminal Descriptor */
+struct uac1_output_terminal_descriptor {
+	__u8  bLength;			/* in bytes: 9 */
+	__u8  bDescriptorType;		/* CS_INTERFACE descriptor type */
+	__u8  bDescriptorSubtype;	/* OUTPUT_TERMINAL descriptor subtype */
+	__u8  bTerminalID;		/* Constant uniquely terminal ID */
+	__le16 wTerminalType;		/* USB Audio Terminal Types */
+	__u8  bAssocTerminal;		/* ID of the Input Terminal associated */
+	__u8  bSourceID;		/* ID of the connected Unit or Terminal*/
+	__u8  iTerminal;
+} __attribute__ ((packed));
+
+#define UAC_DT_OUTPUT_TERMINAL_SIZE			9
+
+/* Terminals - 2.3 Output Terminal Types */
+#define UAC_OUTPUT_TERMINAL_UNDEFINED			0x300
+#define UAC_OUTPUT_TERMINAL_SPEAKER			0x301
+#define UAC_OUTPUT_TERMINAL_HEADPHONES			0x302
+#define UAC_OUTPUT_TERMINAL_HEAD_MOUNTED_DISPLAY_AUDIO	0x303
+#define UAC_OUTPUT_TERMINAL_DESKTOP_SPEAKER		0x304
+#define UAC_OUTPUT_TERMINAL_ROOM_SPEAKER		0x305
+#define UAC_OUTPUT_TERMINAL_COMMUNICATION_SPEAKER	0x306
+#define UAC_OUTPUT_TERMINAL_LOW_FREQ_EFFECTS_SPEAKER	0x307
+
+/* Set bControlSize = 2 as default setting */
+#define UAC_DT_FEATURE_UNIT_SIZE(ch)		(7 + ((ch) + 1) * 2)
+
+/* As above, but more useful for defining your own descriptors: */
+#define DECLARE_UAC_FEATURE_UNIT_DESCRIPTOR(ch)			\
+struct uac_feature_unit_descriptor_##ch {			\
+	__u8  bLength;						\
+	__u8  bDescriptorType;					\
+	__u8  bDescriptorSubtype;				\
+	__u8  bUnitID;						\
+	__u8  bSourceID;					\
+	__u8  bControlSize;					\
+	__le16 bmaControls[ch + 1];				\
+	__u8  iFeature;						\
+} __attribute__ ((packed))
+
+/* 4.3.2.3 Mixer Unit Descriptor */
+struct uac_mixer_unit_descriptor {
+	__u8 bLength;
+	__u8 bDescriptorType;
+	__u8 bDescriptorSubtype;
+	__u8 bUnitID;
+	__u8 bNrInPins;
+	__u8 baSourceID[];
+} __attribute__ ((packed));
+
+static inline __u8 uac_mixer_unit_bNrChannels(struct uac_mixer_unit_descriptor *desc)
+{
+	return desc->baSourceID[desc->bNrInPins];
+}
+
+static inline __u32 uac_mixer_unit_wChannelConfig(struct uac_mixer_unit_descriptor *desc,
+						  int protocol)
+{
+	if (protocol == UAC_VERSION_1)
+		return (desc->baSourceID[desc->bNrInPins + 2] << 8) |
+			desc->baSourceID[desc->bNrInPins + 1];
+	else
+		return  (desc->baSourceID[desc->bNrInPins + 4] << 24) |
+			(desc->baSourceID[desc->bNrInPins + 3] << 16) |
+			(desc->baSourceID[desc->bNrInPins + 2] << 8)  |
+			(desc->baSourceID[desc->bNrInPins + 1]);
+}
+
+static inline __u8 uac_mixer_unit_iChannelNames(struct uac_mixer_unit_descriptor *desc,
+						int protocol)
+{
+	return (protocol == UAC_VERSION_1) ?
+		desc->baSourceID[desc->bNrInPins + 3] :
+		desc->baSourceID[desc->bNrInPins + 5];
+}
+
+static inline __u8 *uac_mixer_unit_bmControls(struct uac_mixer_unit_descriptor *desc,
+					      int protocol)
+{
+	return (protocol == UAC_VERSION_1) ?
+		&desc->baSourceID[desc->bNrInPins + 4] :
+		&desc->baSourceID[desc->bNrInPins + 6];
+}
+
+static inline __u8 uac_mixer_unit_iMixer(struct uac_mixer_unit_descriptor *desc)
+{
+	__u8 *raw = (__u8 *) desc;
+	return raw[desc->bLength - 1];
+}
+
+/* 4.3.2.4 Selector Unit Descriptor */
+struct uac_selector_unit_descriptor {
+	__u8 bLength;
+	__u8 bDescriptorType;
+	__u8 bDescriptorSubtype;
+	__u8 bUintID;
+	__u8 bNrInPins;
+	__u8 baSourceID[];
+} __attribute__ ((packed));
+
+static inline __u8 uac_selector_unit_iSelector(struct uac_selector_unit_descriptor *desc)
+{
+	__u8 *raw = (__u8 *) desc;
+	return raw[desc->bLength - 1];
+}
+
+/* 4.3.2.5 Feature Unit Descriptor */
+struct uac_feature_unit_descriptor {
+	__u8 bLength;
+	__u8 bDescriptorType;
+	__u8 bDescriptorSubtype;
+	__u8 bUnitID;
+	__u8 bSourceID;
+	__u8 bControlSize;
+	__u8 bmaControls[0]; /* variable length */
+} __attribute__((packed));
+
+static inline __u8 uac_feature_unit_iFeature(struct uac_feature_unit_descriptor *desc)
+{
+	__u8 *raw = (__u8 *) desc;
+	return raw[desc->bLength - 1];
+}
+
+/* 4.3.2.6 Processing Unit Descriptors */
+struct uac_processing_unit_descriptor {
+	__u8 bLength;
+	__u8 bDescriptorType;
+	__u8 bDescriptorSubtype;
+	__u8 bUnitID;
+	__u16 wProcessType;
+	__u8 bNrInPins;
+	__u8 baSourceID[];
+} __attribute__ ((packed));
+
+static inline __u8 uac_processing_unit_bNrChannels(struct uac_processing_unit_descriptor *desc)
+{
+	return desc->baSourceID[desc->bNrInPins];
+}
+
+static inline __u32 uac_processing_unit_wChannelConfig(struct uac_processing_unit_descriptor *desc,
+						       int protocol)
+{
+	if (protocol == UAC_VERSION_1)
+		return (desc->baSourceID[desc->bNrInPins + 2] << 8) |
+			desc->baSourceID[desc->bNrInPins + 1];
+	else
+		return  (desc->baSourceID[desc->bNrInPins + 4] << 24) |
+			(desc->baSourceID[desc->bNrInPins + 3] << 16) |
+			(desc->baSourceID[desc->bNrInPins + 2] << 8)  |
+			(desc->baSourceID[desc->bNrInPins + 1]);
+}
+
+static inline __u8 uac_processing_unit_iChannelNames(struct uac_processing_unit_descriptor *desc,
+						     int protocol)
+{
+	return (protocol == UAC_VERSION_1) ?
+		desc->baSourceID[desc->bNrInPins + 3] :
+		desc->baSourceID[desc->bNrInPins + 5];
+}
+
+static inline __u8 uac_processing_unit_bControlSize(struct uac_processing_unit_descriptor *desc,
+						    int protocol)
+{
+	return (protocol == UAC_VERSION_1) ?
+		desc->baSourceID[desc->bNrInPins + 4] :
+		desc->baSourceID[desc->bNrInPins + 6];
+}
+
+static inline __u8 *uac_processing_unit_bmControls(struct uac_processing_unit_descriptor *desc,
+						   int protocol)
+{
+	return (protocol == UAC_VERSION_1) ?
+		&desc->baSourceID[desc->bNrInPins + 5] :
+		&desc->baSourceID[desc->bNrInPins + 7];
+}
+
+static inline __u8 uac_processing_unit_iProcessing(struct uac_processing_unit_descriptor *desc,
+						   int protocol)
+{
+	__u8 control_size = uac_processing_unit_bControlSize(desc, protocol);
+	return desc->baSourceID[desc->bNrInPins + control_size];
+}
+
+static inline __u8 *uac_processing_unit_specific(struct uac_processing_unit_descriptor *desc,
+						 int protocol)
+{
+	__u8 control_size = uac_processing_unit_bControlSize(desc, protocol);
+	return &desc->baSourceID[desc->bNrInPins + control_size + 1];
+}
+
+/* 4.5.2 Class-Specific AS Interface Descriptor */
+struct uac1_as_header_descriptor {
+	__u8  bLength;			/* in bytes: 7 */
+	__u8  bDescriptorType;		/* USB_DT_CS_INTERFACE */
+	__u8  bDescriptorSubtype;	/* AS_GENERAL */
+	__u8  bTerminalLink;		/* Terminal ID of connected Terminal */
+	__u8  bDelay;			/* Delay introduced by the data path */
+	__le16 wFormatTag;		/* The Audio Data Format */
+} __attribute__ ((packed));
+
+#define UAC_DT_AS_HEADER_SIZE		7
+
+/* Formats - A.1.1 Audio Data Format Type I Codes */
+#define UAC_FORMAT_TYPE_I_UNDEFINED	0x0
+#define UAC_FORMAT_TYPE_I_PCM		0x1
+#define UAC_FORMAT_TYPE_I_PCM8		0x2
+#define UAC_FORMAT_TYPE_I_IEEE_FLOAT	0x3
+#define UAC_FORMAT_TYPE_I_ALAW		0x4
+#define UAC_FORMAT_TYPE_I_MULAW		0x5
+
+struct uac_format_type_i_continuous_descriptor {
+	__u8  bLength;			/* in bytes: 8 + (ns * 3) */
+	__u8  bDescriptorType;		/* USB_DT_CS_INTERFACE */
+	__u8  bDescriptorSubtype;	/* FORMAT_TYPE */
+	__u8  bFormatType;		/* FORMAT_TYPE_1 */
+	__u8  bNrChannels;		/* physical channels in the stream */
+	__u8  bSubframeSize;		/* */
+	__u8  bBitResolution;
+	__u8  bSamFreqType;
+	__u8  tLowerSamFreq[3];
+	__u8  tUpperSamFreq[3];
+} __attribute__ ((packed));
+
+#define UAC_FORMAT_TYPE_I_CONTINUOUS_DESC_SIZE	14
+
+struct uac_format_type_i_discrete_descriptor {
+	__u8  bLength;			/* in bytes: 8 + (ns * 3) */
+	__u8  bDescriptorType;		/* USB_DT_CS_INTERFACE */
+	__u8  bDescriptorSubtype;	/* FORMAT_TYPE */
+	__u8  bFormatType;		/* FORMAT_TYPE_1 */
+	__u8  bNrChannels;		/* physical channels in the stream */
+	__u8  bSubframeSize;		/* */
+	__u8  bBitResolution;
+	__u8  bSamFreqType;
+	__u8  tSamFreq[][3];
+} __attribute__ ((packed));
+
+#define DECLARE_UAC_FORMAT_TYPE_I_DISCRETE_DESC(n)		\
+struct uac_format_type_i_discrete_descriptor_##n {		\
+	__u8  bLength;						\
+	__u8  bDescriptorType;					\
+	__u8  bDescriptorSubtype;				\
+	__u8  bFormatType;					\
+	__u8  bNrChannels;					\
+	__u8  bSubframeSize;					\
+	__u8  bBitResolution;					\
+	__u8  bSamFreqType;					\
+	__u8  tSamFreq[n][3];					\
+} __attribute__ ((packed))
+
+#define UAC_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(n)	(8 + (n * 3))
+
+struct uac_format_type_i_ext_descriptor {
+	__u8 bLength;
+	__u8 bDescriptorType;
+	__u8 bDescriptorSubtype;
+	__u8 bFormatType;
+	__u8 bSubslotSize;
+	__u8 bBitResolution;
+	__u8 bHeaderLength;
+	__u8 bControlSize;
+	__u8 bSideBandProtocol;
+} __attribute__((packed));
+
+/* Formats - Audio Data Format Type I Codes */
+
+#define UAC_FORMAT_TYPE_II_MPEG	0x1001
+#define UAC_FORMAT_TYPE_II_AC3	0x1002
+
+struct uac_format_type_ii_discrete_descriptor {
+	__u8 bLength;
+	__u8 bDescriptorType;
+	__u8 bDescriptorSubtype;
+	__u8 bFormatType;
+	__le16 wMaxBitRate;
+	__le16 wSamplesPerFrame;
+	__u8 bSamFreqType;
+	__u8 tSamFreq[][3];
+} __attribute__((packed));
+
+struct uac_format_type_ii_ext_descriptor {
+	__u8 bLength;
+	__u8 bDescriptorType;
+	__u8 bDescriptorSubtype;
+	__u8 bFormatType;
+	__u16 wMaxBitRate;
+	__u16 wSamplesPerFrame;
+	__u8 bHeaderLength;
+	__u8 bSideBandProtocol;
+} __attribute__((packed));
+
+/* type III */
+#define UAC_FORMAT_TYPE_III_IEC1937_AC3	0x2001
+#define UAC_FORMAT_TYPE_III_IEC1937_MPEG1_LAYER1	0x2002
+#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_NOEXT	0x2003
+#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_EXT	0x2004
+#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER1_LS	0x2005
+#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER23_LS	0x2006
+
+/* Formats - A.2 Format Type Codes */
+#define UAC_FORMAT_TYPE_UNDEFINED	0x0
+#define UAC_FORMAT_TYPE_I		0x1
+#define UAC_FORMAT_TYPE_II		0x2
+#define UAC_FORMAT_TYPE_III		0x3
+#define UAC_EXT_FORMAT_TYPE_I		0x81
+#define UAC_EXT_FORMAT_TYPE_II		0x82
+#define UAC_EXT_FORMAT_TYPE_III		0x83
+
+struct uac_iso_endpoint_descriptor {
+	__u8  bLength;			/* in bytes: 7 */
+	__u8  bDescriptorType;		/* USB_DT_CS_ENDPOINT */
+	__u8  bDescriptorSubtype;	/* EP_GENERAL */
+	__u8  bmAttributes;
+	__u8  bLockDelayUnits;
+	__le16 wLockDelay;
+} __attribute__((packed));
+#define UAC_ISO_ENDPOINT_DESC_SIZE	7
+
+#define UAC_EP_CS_ATTR_SAMPLE_RATE	0x01
+#define UAC_EP_CS_ATTR_PITCH_CONTROL	0x02
+#define UAC_EP_CS_ATTR_FILL_MAX		0x80
+
+/* status word format (3.7.1.1) */
+
+#define UAC1_STATUS_TYPE_ORIG_MASK		0x0f
+#define UAC1_STATUS_TYPE_ORIG_AUDIO_CONTROL_IF	0x0
+#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_IF	0x1
+#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_EP	0x2
+
+#define UAC1_STATUS_TYPE_IRQ_PENDING		(1 << 7)
+#define UAC1_STATUS_TYPE_MEM_CHANGED		(1 << 6)
+
+struct uac1_status_word {
+	__u8 bStatusType;
+	__u8 bOriginator;
+} __attribute__((packed));
+
+#ifdef __KERNEL__
+
+struct usb_audio_control {
+	struct list_head list;
+	const char *name;
+	u8 type;
+	int data[5];
+	int (*set)(struct usb_audio_control *con, u8 cmd, int value);
+	int (*get)(struct usb_audio_control *con, u8 cmd);
+};
+
+struct usb_audio_control_selector {
+	struct list_head list;
+	struct list_head control;
+	u8 id;
+	const char *name;
+	u8 type;
+	struct usb_descriptor_header *desc;
+};
+
+#endif /* __KERNEL__ */
+
+#endif /* __LINUX_USB_AUDIO_H */
diff --git a/include/linux/usb/c67x00.h b/include/linux/usb/c67x00.h
new file mode 100644
index 00000000..83c6b454
--- /dev/null
+++ b/include/linux/usb/c67x00.h
@@ -0,0 +1,48 @@
+/*
+ * usb_c67x00.h: platform definitions for the Cypress C67X00 USB chip
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301  USA.
+ */
+
+#ifndef _LINUX_USB_C67X00_H
+#define _LINUX_USB_C67X00_H
+
+/* SIE configuration */
+#define C67X00_SIE_UNUSED	0
+#define C67X00_SIE_HOST		1
+#define C67X00_SIE_PERIPHERAL_A	2	/* peripheral on A port */
+#define C67X00_SIE_PERIPHERAL_B	3	/* peripheral on B port */
+
+#define c67x00_sie_config(config, n)  (((config)>>(4*(n)))&0x3)
+
+#define C67X00_SIE1_UNUSED	        (C67X00_SIE_UNUSED		<< 0)
+#define C67X00_SIE1_HOST	        (C67X00_SIE_HOST		<< 0)
+#define C67X00_SIE1_PERIPHERAL_A	(C67X00_SIE_PERIPHERAL_A	<< 0)
+#define C67X00_SIE1_PERIPHERAL_B	(C67X00_SIE_PERIPHERAL_B	<< 0)
+
+#define C67X00_SIE2_UNUSED		(C67X00_SIE_UNUSED		<< 4)
+#define C67X00_SIE2_HOST		(C67X00_SIE_HOST		<< 4)
+#define C67X00_SIE2_PERIPHERAL_A	(C67X00_SIE_PERIPHERAL_A	<< 4)
+#define C67X00_SIE2_PERIPHERAL_B	(C67X00_SIE_PERIPHERAL_B	<< 4)
+
+struct c67x00_platform_data {
+	int sie_config;			/* SIEs config (C67X00_SIEx_*) */
+	unsigned long hpi_regstep;	/* Step between HPI registers  */
+};
+
+#endif /* _LINUX_USB_C67X00_H */
diff --git a/include/linux/usb/cdc-wdm.h b/include/linux/usb/cdc-wdm.h
new file mode 100644
index 00000000..719c3326
--- /dev/null
+++ b/include/linux/usb/cdc-wdm.h
@@ -0,0 +1,19 @@
+/*
+ * USB CDC Device Management subdriver
+ *
+ * Copyright (c) 2012  Bjørn Mork <bjorn@mork.no>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_USB_CDC_WDM_H
+#define __LINUX_USB_CDC_WDM_H
+
+extern struct usb_driver *usb_cdc_wdm_register(struct usb_interface *intf,
+					struct usb_endpoint_descriptor *ep,
+					int bufsize,
+					int (*manage_power)(struct usb_interface *, int));
+
+#endif /* __LINUX_USB_CDC_WDM_H */
diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h
new file mode 100644
index 00000000..81a92793
--- /dev/null
+++ b/include/linux/usb/cdc.h
@@ -0,0 +1,412 @@
+/*
+ * USB Communications Device Class (CDC) definitions
+ *
+ * CDC says how to talk to lots of different types of network adapters,
+ * notably ethernet adapters and various modems.  It's used mostly with
+ * firmware based USB peripherals.
+ */
+
+#ifndef __LINUX_USB_CDC_H
+#define __LINUX_USB_CDC_H
+
+#include <linux/types.h>
+
+#define USB_CDC_SUBCLASS_ACM			0x02
+#define USB_CDC_SUBCLASS_ETHERNET		0x06
+#define USB_CDC_SUBCLASS_WHCM			0x08
+#define USB_CDC_SUBCLASS_DMM			0x09
+#define USB_CDC_SUBCLASS_MDLM			0x0a
+#define USB_CDC_SUBCLASS_OBEX			0x0b
+#define USB_CDC_SUBCLASS_EEM			0x0c
+#define USB_CDC_SUBCLASS_NCM			0x0d
+
+#define USB_CDC_PROTO_NONE			0
+
+#define USB_CDC_ACM_PROTO_AT_V25TER		1
+#define USB_CDC_ACM_PROTO_AT_PCCA101		2
+#define USB_CDC_ACM_PROTO_AT_PCCA101_WAKE	3
+#define USB_CDC_ACM_PROTO_AT_GSM		4
+#define USB_CDC_ACM_PROTO_AT_3G			5
+#define USB_CDC_ACM_PROTO_AT_CDMA		6
+#define USB_CDC_ACM_PROTO_VENDOR		0xff
+
+#define USB_CDC_PROTO_EEM			7
+
+#define USB_CDC_NCM_PROTO_NTB			1
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Class-Specific descriptors ... there are a couple dozen of them
+ */
+
+#define USB_CDC_HEADER_TYPE		0x00	/* header_desc */
+#define USB_CDC_CALL_MANAGEMENT_TYPE	0x01	/* call_mgmt_descriptor */
+#define USB_CDC_ACM_TYPE		0x02	/* acm_descriptor */
+#define USB_CDC_UNION_TYPE		0x06	/* union_desc */
+#define USB_CDC_COUNTRY_TYPE		0x07
+#define USB_CDC_NETWORK_TERMINAL_TYPE	0x0a	/* network_terminal_desc */
+#define USB_CDC_ETHERNET_TYPE		0x0f	/* ether_desc */
+#define USB_CDC_WHCM_TYPE		0x11
+#define USB_CDC_MDLM_TYPE		0x12	/* mdlm_desc */
+#define USB_CDC_MDLM_DETAIL_TYPE	0x13	/* mdlm_detail_desc */
+#define USB_CDC_DMM_TYPE		0x14
+#define USB_CDC_OBEX_TYPE		0x15
+#define USB_CDC_NCM_TYPE		0x1a
+
+/* "Header Functional Descriptor" from CDC spec  5.2.3.1 */
+struct usb_cdc_header_desc {
+	__u8	bLength;
+	__u8	bDescriptorType;
+	__u8	bDescriptorSubType;
+
+	__le16	bcdCDC;
+} __attribute__ ((packed));
+
+/* "Call Management Descriptor" from CDC spec  5.2.3.2 */
+struct usb_cdc_call_mgmt_descriptor {
+	__u8	bLength;
+	__u8	bDescriptorType;
+	__u8	bDescriptorSubType;
+
+	__u8	bmCapabilities;
+#define USB_CDC_CALL_MGMT_CAP_CALL_MGMT		0x01
+#define USB_CDC_CALL_MGMT_CAP_DATA_INTF		0x02
+
+	__u8	bDataInterface;
+} __attribute__ ((packed));
+
+/* "Abstract Control Management Descriptor" from CDC spec  5.2.3.3 */
+struct usb_cdc_acm_descriptor {
+	__u8	bLength;
+	__u8	bDescriptorType;
+	__u8	bDescriptorSubType;
+
+	__u8	bmCapabilities;
+} __attribute__ ((packed));
+
+/* capabilities from 5.2.3.3 */
+
+#define USB_CDC_COMM_FEATURE	0x01
+#define USB_CDC_CAP_LINE	0x02
+#define USB_CDC_CAP_BRK		0x04
+#define USB_CDC_CAP_NOTIFY	0x08
+
+/* "Union Functional Descriptor" from CDC spec 5.2.3.8 */
+struct usb_cdc_union_desc {
+	__u8	bLength;
+	__u8	bDescriptorType;
+	__u8	bDescriptorSubType;
+
+	__u8	bMasterInterface0;
+	__u8	bSlaveInterface0;
+	/* ... and there could be other slave interfaces */
+} __attribute__ ((packed));
+
+/* "Country Selection Functional Descriptor" from CDC spec 5.2.3.9 */
+struct usb_cdc_country_functional_desc {
+	__u8	bLength;
+	__u8	bDescriptorType;
+	__u8	bDescriptorSubType;
+
+	__u8	iCountryCodeRelDate;
+	__le16	wCountyCode0;
+	/* ... and there can be a lot of country codes */
+} __attribute__ ((packed));
+
+/* "Network Channel Terminal Functional Descriptor" from CDC spec 5.2.3.11 */
+struct usb_cdc_network_terminal_desc {
+	__u8	bLength;
+	__u8	bDescriptorType;
+	__u8	bDescriptorSubType;
+
+	__u8	bEntityId;
+	__u8	iName;
+	__u8	bChannelIndex;
+	__u8	bPhysicalInterface;
+} __attribute__ ((packed));
+
+/* "Ethernet Networking Functional Descriptor" from CDC spec 5.2.3.16 */
+struct usb_cdc_ether_desc {
+	__u8	bLength;
+	__u8	bDescriptorType;
+	__u8	bDescriptorSubType;
+
+	__u8	iMACAddress;
+	__le32	bmEthernetStatistics;
+	__le16	wMaxSegmentSize;
+	__le16	wNumberMCFilters;
+	__u8	bNumberPowerFilters;
+} __attribute__ ((packed));
+
+/* "Telephone Control Model Functional Descriptor" from CDC WMC spec 6.3..3 */
+struct usb_cdc_dmm_desc {
+	__u8	bFunctionLength;
+	__u8	bDescriptorType;
+	__u8	bDescriptorSubtype;
+	__u16	bcdVersion;
+	__le16	wMaxCommand;
+} __attribute__ ((packed));
+
+/* "MDLM Functional Descriptor" from CDC WMC spec 6.7.2.3 */
+struct usb_cdc_mdlm_desc {
+	__u8	bLength;
+	__u8	bDescriptorType;
+	__u8	bDescriptorSubType;
+
+	__le16	bcdVersion;
+	__u8	bGUID[16];
+} __attribute__ ((packed));
+
+/* "MDLM Detail Functional Descriptor" from CDC WMC spec 6.7.2.4 */
+struct usb_cdc_mdlm_detail_desc {
+	__u8	bLength;
+	__u8	bDescriptorType;
+	__u8	bDescriptorSubType;
+
+	/* type is associated with mdlm_desc.bGUID */
+	__u8	bGuidDescriptorType;
+	__u8	bDetailData[0];
+} __attribute__ ((packed));
+
+/* "OBEX Control Model Functional Descriptor" */
+struct usb_cdc_obex_desc {
+	__u8	bLength;
+	__u8	bDescriptorType;
+	__u8	bDescriptorSubType;
+
+	__le16	bcdVersion;
+} __attribute__ ((packed));
+
+/* "NCM Control Model Functional Descriptor" */
+struct usb_cdc_ncm_desc {
+	__u8	bLength;
+	__u8	bDescriptorType;
+	__u8	bDescriptorSubType;
+
+	__le16	bcdNcmVersion;
+	__u8	bmNetworkCapabilities;
+} __attribute__ ((packed));
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Class-Specific Control Requests (6.2)
+ *
+ * section 3.6.2.1 table 4 has the ACM profile, for modems.
+ * section 3.8.2 table 10 has the ethernet profile.
+ *
+ * Microsoft's RNDIS stack for Ethernet is a vendor-specific CDC ACM variant,
+ * heavily dependent on the encapsulated (proprietary) command mechanism.
+ */
+
+#define USB_CDC_SEND_ENCAPSULATED_COMMAND	0x00
+#define USB_CDC_GET_ENCAPSULATED_RESPONSE	0x01
+#define USB_CDC_REQ_SET_LINE_CODING		0x20
+#define USB_CDC_REQ_GET_LINE_CODING		0x21
+#define USB_CDC_REQ_SET_CONTROL_LINE_STATE	0x22
+#define USB_CDC_REQ_SEND_BREAK			0x23
+#define USB_CDC_SET_ETHERNET_MULTICAST_FILTERS	0x40
+#define USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER	0x41
+#define USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER	0x42
+#define USB_CDC_SET_ETHERNET_PACKET_FILTER	0x43
+#define USB_CDC_GET_ETHERNET_STATISTIC		0x44
+#define USB_CDC_GET_NTB_PARAMETERS		0x80
+#define USB_CDC_GET_NET_ADDRESS			0x81
+#define USB_CDC_SET_NET_ADDRESS			0x82
+#define USB_CDC_GET_NTB_FORMAT			0x83
+#define USB_CDC_SET_NTB_FORMAT			0x84
+#define USB_CDC_GET_NTB_INPUT_SIZE		0x85
+#define USB_CDC_SET_NTB_INPUT_SIZE		0x86
+#define USB_CDC_GET_MAX_DATAGRAM_SIZE		0x87
+#define USB_CDC_SET_MAX_DATAGRAM_SIZE		0x88
+#define USB_CDC_GET_CRC_MODE			0x89
+#define USB_CDC_SET_CRC_MODE			0x8a
+
+/* Line Coding Structure from CDC spec 6.2.13 */
+struct usb_cdc_line_coding {
+	__le32	dwDTERate;
+	__u8	bCharFormat;
+#define USB_CDC_1_STOP_BITS			0
+#define USB_CDC_1_5_STOP_BITS			1
+#define USB_CDC_2_STOP_BITS			2
+
+	__u8	bParityType;
+#define USB_CDC_NO_PARITY			0
+#define USB_CDC_ODD_PARITY			1
+#define USB_CDC_EVEN_PARITY			2
+#define USB_CDC_MARK_PARITY			3
+#define USB_CDC_SPACE_PARITY			4
+
+	__u8	bDataBits;
+} __attribute__ ((packed));
+
+/* table 62; bits in multicast filter */
+#define	USB_CDC_PACKET_TYPE_PROMISCUOUS		(1 << 0)
+#define	USB_CDC_PACKET_TYPE_ALL_MULTICAST	(1 << 1) /* no filter */
+#define	USB_CDC_PACKET_TYPE_DIRECTED		(1 << 2)
+#define	USB_CDC_PACKET_TYPE_BROADCAST		(1 << 3)
+#define	USB_CDC_PACKET_TYPE_MULTICAST		(1 << 4) /* filtered */
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Class-Specific Notifications (6.3) sent by interrupt transfers
+ *
+ * section 3.8.2 table 11 of the CDC spec lists Ethernet notifications
+ * section 3.6.2.1 table 5 specifies ACM notifications, accepted by RNDIS
+ * RNDIS also defines its own bit-incompatible notifications
+ */
+
+#define USB_CDC_NOTIFY_NETWORK_CONNECTION	0x00
+#define USB_CDC_NOTIFY_RESPONSE_AVAILABLE	0x01
+#define USB_CDC_NOTIFY_SERIAL_STATE		0x20
+#define USB_CDC_NOTIFY_SPEED_CHANGE		0x2a
+
+struct usb_cdc_notification {
+	__u8	bmRequestType;
+	__u8	bNotificationType;
+	__le16	wValue;
+	__le16	wIndex;
+	__le16	wLength;
+} __attribute__ ((packed));
+
+struct usb_cdc_speed_change {
+	__le32	DLBitRRate;	/* contains the downlink bit rate (IN pipe) */
+	__le32	ULBitRate;	/* contains the uplink bit rate (OUT pipe) */
+} __attribute__ ((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Class Specific structures and constants
+ *
+ * CDC NCM NTB parameters structure, CDC NCM subclass 6.2.1
+ *
+ */
+
+struct usb_cdc_ncm_ntb_parameters {
+	__le16	wLength;
+	__le16	bmNtbFormatsSupported;
+	__le32	dwNtbInMaxSize;
+	__le16	wNdpInDivisor;
+	__le16	wNdpInPayloadRemainder;
+	__le16	wNdpInAlignment;
+	__le16	wPadding1;
+	__le32	dwNtbOutMaxSize;
+	__le16	wNdpOutDivisor;
+	__le16	wNdpOutPayloadRemainder;
+	__le16	wNdpOutAlignment;
+	__le16	wNtbOutMaxDatagrams;
+} __attribute__ ((packed));
+
+/*
+ * CDC NCM transfer headers, CDC NCM subclass 3.2
+ */
+
+#define USB_CDC_NCM_NTH16_SIGN		0x484D434E /* NCMH */
+#define USB_CDC_NCM_NTH32_SIGN		0x686D636E /* ncmh */
+
+struct usb_cdc_ncm_nth16 {
+	__le32	dwSignature;
+	__le16	wHeaderLength;
+	__le16	wSequence;
+	__le16	wBlockLength;
+	__le16	wNdpIndex;
+} __attribute__ ((packed));
+
+struct usb_cdc_ncm_nth32 {
+	__le32	dwSignature;
+	__le16	wHeaderLength;
+	__le16	wSequence;
+	__le32	dwBlockLength;
+	__le32	dwNdpIndex;
+} __attribute__ ((packed));
+
+/*
+ * CDC NCM datagram pointers, CDC NCM subclass 3.3
+ */
+
+#define USB_CDC_NCM_NDP16_CRC_SIGN	0x314D434E /* NCM1 */
+#define USB_CDC_NCM_NDP16_NOCRC_SIGN	0x304D434E /* NCM0 */
+#define USB_CDC_NCM_NDP32_CRC_SIGN	0x316D636E /* ncm1 */
+#define USB_CDC_NCM_NDP32_NOCRC_SIGN	0x306D636E /* ncm0 */
+
+/* 16-bit NCM Datagram Pointer Entry */
+struct usb_cdc_ncm_dpe16 {
+	__le16	wDatagramIndex;
+	__le16	wDatagramLength;
+} __attribute__((__packed__));
+
+/* 16-bit NCM Datagram Pointer Table */
+struct usb_cdc_ncm_ndp16 {
+	__le32	dwSignature;
+	__le16	wLength;
+	__le16	wNextNdpIndex;
+	struct	usb_cdc_ncm_dpe16 dpe16[0];
+} __attribute__ ((packed));
+
+/* 32-bit NCM Datagram Pointer Entry */
+struct usb_cdc_ncm_dpe32 {
+	__le32	dwDatagramIndex;
+	__le32	dwDatagramLength;
+} __attribute__((__packed__));
+
+/* 32-bit NCM Datagram Pointer Table */
+struct usb_cdc_ncm_ndp32 {
+	__le32	dwSignature;
+	__le16	wLength;
+	__le16	wReserved6;
+	__le32	dwNextNdpIndex;
+	__le32	dwReserved12;
+	struct	usb_cdc_ncm_dpe32 dpe32[0];
+} __attribute__ ((packed));
+
+/* CDC NCM subclass 3.2.1 and 3.2.2 */
+#define USB_CDC_NCM_NDP16_INDEX_MIN			0x000C
+#define USB_CDC_NCM_NDP32_INDEX_MIN			0x0010
+
+/* CDC NCM subclass 3.3.3 Datagram Formatting */
+#define USB_CDC_NCM_DATAGRAM_FORMAT_CRC			0x30
+#define USB_CDC_NCM_DATAGRAM_FORMAT_NOCRC		0X31
+
+/* CDC NCM subclass 4.2 NCM Communications Interface Protocol Code */
+#define USB_CDC_NCM_PROTO_CODE_NO_ENCAP_COMMANDS	0x00
+#define USB_CDC_NCM_PROTO_CODE_EXTERN_PROTO		0xFE
+
+/* CDC NCM subclass 5.2.1 NCM Functional Descriptor, bmNetworkCapabilities */
+#define USB_CDC_NCM_NCAP_ETH_FILTER			(1 << 0)
+#define USB_CDC_NCM_NCAP_NET_ADDRESS			(1 << 1)
+#define USB_CDC_NCM_NCAP_ENCAP_COMMAND			(1 << 2)
+#define USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE		(1 << 3)
+#define USB_CDC_NCM_NCAP_CRC_MODE			(1 << 4)
+#define	USB_CDC_NCM_NCAP_NTB_INPUT_SIZE			(1 << 5)
+
+/* CDC NCM subclass Table 6-3: NTB Parameter Structure */
+#define USB_CDC_NCM_NTB16_SUPPORTED			(1 << 0)
+#define USB_CDC_NCM_NTB32_SUPPORTED			(1 << 1)
+
+/* CDC NCM subclass Table 6-3: NTB Parameter Structure */
+#define USB_CDC_NCM_NDP_ALIGN_MIN_SIZE			0x04
+#define USB_CDC_NCM_NTB_MAX_LENGTH			0x1C
+
+/* CDC NCM subclass 6.2.5 SetNtbFormat */
+#define USB_CDC_NCM_NTB16_FORMAT			0x00
+#define USB_CDC_NCM_NTB32_FORMAT			0x01
+
+/* CDC NCM subclass 6.2.7 SetNtbInputSize */
+#define USB_CDC_NCM_NTB_MIN_IN_SIZE			2048
+#define USB_CDC_NCM_NTB_MIN_OUT_SIZE			2048
+
+/* NTB Input Size Structure */
+struct usb_cdc_ncm_ndp_input_size {
+	__le32	dwNtbInMaxSize;
+	__le16	wNtbInMaxDatagrams;
+	__le16	wReserved;
+} __attribute__ ((packed));
+
+/* CDC NCM subclass 6.2.11 SetCrcMode */
+#define USB_CDC_NCM_CRC_NOT_APPENDED			0x00
+#define USB_CDC_NCM_CRC_APPENDED			0x01
+
+#endif /* __LINUX_USB_CDC_H */
diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h
new file mode 100644
index 00000000..f1d26b60
--- /dev/null
+++ b/include/linux/usb/ch11.h
@@ -0,0 +1,264 @@
+/*
+ * This file holds Hub protocol constants and data structures that are
+ * defined in chapter 11 (Hub Specification) of the USB 2.0 specification.
+ *
+ * It is used/shared between the USB core, the HCDs and couple of other USB
+ * drivers.
+ */
+
+#ifndef __LINUX_CH11_H
+#define __LINUX_CH11_H
+
+#include <linux/types.h>	/* __u8 etc */
+
+/*
+ * Hub request types
+ */
+
+#define USB_RT_HUB	(USB_TYPE_CLASS | USB_RECIP_DEVICE)
+#define USB_RT_PORT	(USB_TYPE_CLASS | USB_RECIP_OTHER)
+
+/*
+ * Hub class requests
+ * See USB 2.0 spec Table 11-16
+ */
+#define HUB_CLEAR_TT_BUFFER	8
+#define HUB_RESET_TT		9
+#define HUB_GET_TT_STATE	10
+#define HUB_STOP_TT		11
+
+/*
+ * Hub class additional requests defined by USB 3.0 spec
+ * See USB 3.0 spec Table 10-6
+ */
+#define HUB_SET_DEPTH		12
+#define HUB_GET_PORT_ERR_COUNT	13
+
+/*
+ * Hub Class feature numbers
+ * See USB 2.0 spec Table 11-17
+ */
+#define C_HUB_LOCAL_POWER	0
+#define C_HUB_OVER_CURRENT	1
+
+/*
+ * Port feature numbers
+ * See USB 2.0 spec Table 11-17
+ */
+#define USB_PORT_FEAT_CONNECTION	0
+#define USB_PORT_FEAT_ENABLE		1
+#define USB_PORT_FEAT_SUSPEND		2	/* L2 suspend */
+#define USB_PORT_FEAT_OVER_CURRENT	3
+#define USB_PORT_FEAT_RESET		4
+#define USB_PORT_FEAT_L1		5	/* L1 suspend */
+#define USB_PORT_FEAT_POWER		8
+#define USB_PORT_FEAT_LOWSPEED		9	/* Should never be used */
+#define USB_PORT_FEAT_C_CONNECTION	16
+#define USB_PORT_FEAT_C_ENABLE		17
+#define USB_PORT_FEAT_C_SUSPEND		18
+#define USB_PORT_FEAT_C_OVER_CURRENT	19
+#define USB_PORT_FEAT_C_RESET		20
+#define USB_PORT_FEAT_TEST              21
+#define USB_PORT_FEAT_INDICATOR         22
+#define USB_PORT_FEAT_C_PORT_L1         23
+
+/*
+ * Port feature selectors added by USB 3.0 spec.
+ * See USB 3.0 spec Table 10-7
+ */
+#define USB_PORT_FEAT_LINK_STATE		5
+#define USB_PORT_FEAT_U1_TIMEOUT		23
+#define USB_PORT_FEAT_U2_TIMEOUT		24
+#define USB_PORT_FEAT_C_PORT_LINK_STATE		25
+#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR	26
+#define USB_PORT_FEAT_REMOTE_WAKE_MASK		27
+#define USB_PORT_FEAT_BH_PORT_RESET		28
+#define USB_PORT_FEAT_C_BH_PORT_RESET		29
+#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT	30
+
+/* USB 3.0 hub remote wake mask bits, see table 10-14 */
+#define USB_PORT_FEAT_REMOTE_WAKE_CONNECT	(1 << 8)
+#define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT	(1 << 9)
+#define USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT	(1 << 10)
+
+/*
+ * Hub Status and Hub Change results
+ * See USB 2.0 spec Table 11-19 and Table 11-20
+ */
+struct usb_port_status {
+	__le16 wPortStatus;
+	__le16 wPortChange;
+} __attribute__ ((packed));
+
+/*
+ * wPortStatus bit field
+ * See USB 2.0 spec Table 11-21
+ */
+#define USB_PORT_STAT_CONNECTION	0x0001
+#define USB_PORT_STAT_ENABLE		0x0002
+#define USB_PORT_STAT_SUSPEND		0x0004
+#define USB_PORT_STAT_OVERCURRENT	0x0008
+#define USB_PORT_STAT_RESET		0x0010
+#define USB_PORT_STAT_L1		0x0020
+/* bits 6 to 7 are reserved */
+#define USB_PORT_STAT_POWER		0x0100
+#define USB_PORT_STAT_LOW_SPEED		0x0200
+#define USB_PORT_STAT_HIGH_SPEED        0x0400
+#define USB_PORT_STAT_TEST              0x0800
+#define USB_PORT_STAT_INDICATOR         0x1000
+/* bits 13 to 15 are reserved */
+
+/*
+ * Additions to wPortStatus bit field from USB 3.0
+ * See USB 3.0 spec Table 10-10
+ */
+#define USB_PORT_STAT_LINK_STATE	0x01e0
+#define USB_SS_PORT_STAT_POWER		0x0200
+#define USB_SS_PORT_STAT_SPEED		0x1c00
+#define USB_PORT_STAT_SPEED_5GBPS	0x0000
+/* Valid only if port is enabled */
+/* Bits that are the same from USB 2.0 */
+#define USB_SS_PORT_STAT_MASK (USB_PORT_STAT_CONNECTION |	    \
+				USB_PORT_STAT_ENABLE |	    \
+				USB_PORT_STAT_OVERCURRENT | \
+				USB_PORT_STAT_RESET)
+
+/*
+ * Definitions for PORT_LINK_STATE values
+ * (bits 5-8) in wPortStatus
+ */
+#define USB_SS_PORT_LS_U0		0x0000
+#define USB_SS_PORT_LS_U1		0x0020
+#define USB_SS_PORT_LS_U2		0x0040
+#define USB_SS_PORT_LS_U3		0x0060
+#define USB_SS_PORT_LS_SS_DISABLED	0x0080
+#define USB_SS_PORT_LS_RX_DETECT	0x00a0
+#define USB_SS_PORT_LS_SS_INACTIVE	0x00c0
+#define USB_SS_PORT_LS_POLLING		0x00e0
+#define USB_SS_PORT_LS_RECOVERY		0x0100
+#define USB_SS_PORT_LS_HOT_RESET	0x0120
+#define USB_SS_PORT_LS_COMP_MOD		0x0140
+#define USB_SS_PORT_LS_LOOPBACK		0x0160
+
+/*
+ * wPortChange bit field
+ * See USB 2.0 spec Table 11-22 and USB 2.0 LPM ECN Table-4.10
+ * Bits 0 to 5 shown, bits 6 to 15 are reserved
+ */
+#define USB_PORT_STAT_C_CONNECTION	0x0001
+#define USB_PORT_STAT_C_ENABLE		0x0002
+#define USB_PORT_STAT_C_SUSPEND		0x0004
+#define USB_PORT_STAT_C_OVERCURRENT	0x0008
+#define USB_PORT_STAT_C_RESET		0x0010
+#define USB_PORT_STAT_C_L1		0x0020
+/*
+ * USB 3.0 wPortChange bit fields
+ * See USB 3.0 spec Table 10-11
+ */
+#define USB_PORT_STAT_C_BH_RESET	0x0020
+#define USB_PORT_STAT_C_LINK_STATE	0x0040
+#define USB_PORT_STAT_C_CONFIG_ERROR	0x0080
+
+/*
+ * wHubCharacteristics (masks)
+ * See USB 2.0 spec Table 11-13, offset 3
+ */
+#define HUB_CHAR_LPSM		0x0003 /* Logical Power Switching Mode mask */
+#define HUB_CHAR_COMMON_LPSM	0x0000 /* All ports power control at once */
+#define HUB_CHAR_INDV_PORT_LPSM	0x0001 /* per-port power control */
+#define HUB_CHAR_NO_LPSM	0x0002 /* no power switching */
+
+#define HUB_CHAR_COMPOUND	0x0004 /* hub is part of a compound device */
+
+#define HUB_CHAR_OCPM		0x0018 /* Over-Current Protection Mode mask */
+#define HUB_CHAR_COMMON_OCPM	0x0000 /* All ports Over-Current reporting */
+#define HUB_CHAR_INDV_PORT_OCPM	0x0008 /* per-port Over-current reporting */
+#define HUB_CHAR_NO_OCPM	0x0010 /* No Over-current Protection support */
+
+#define HUB_CHAR_TTTT		0x0060 /* TT Think Time mask */
+#define HUB_CHAR_PORTIND	0x0080 /* per-port indicators (LEDs) */
+
+struct usb_hub_status {
+	__le16 wHubStatus;
+	__le16 wHubChange;
+} __attribute__ ((packed));
+
+/*
+ * Hub Status & Hub Change bit masks
+ * See USB 2.0 spec Table 11-19 and Table 11-20
+ * Bits 0 and 1 for wHubStatus and wHubChange
+ * Bits 2 to 15 are reserved for both
+ */
+#define HUB_STATUS_LOCAL_POWER	0x0001
+#define HUB_STATUS_OVERCURRENT	0x0002
+#define HUB_CHANGE_LOCAL_POWER	0x0001
+#define HUB_CHANGE_OVERCURRENT	0x0002
+
+
+/*
+ * Hub descriptor
+ * See USB 2.0 spec Table 11-13
+ */
+
+#define USB_DT_HUB			(USB_TYPE_CLASS | 0x09)
+#define USB_DT_SS_HUB			(USB_TYPE_CLASS | 0x0a)
+#define USB_DT_HUB_NONVAR_SIZE		7
+#define USB_DT_SS_HUB_SIZE              12
+
+/*
+ * Hub Device descriptor
+ * USB Hub class device protocols
+ */
+
+#define USB_HUB_PR_FS		0 /* Full speed hub */
+#define USB_HUB_PR_HS_NO_TT	0 /* Hi-speed hub without TT */
+#define USB_HUB_PR_HS_SINGLE_TT	1 /* Hi-speed hub with single TT */
+#define USB_HUB_PR_HS_MULTI_TT	2 /* Hi-speed hub with multiple TT */
+#define USB_HUB_PR_SS		3 /* Super speed hub */
+
+struct usb_hub_descriptor {
+	__u8  bDescLength;
+	__u8  bDescriptorType;
+	__u8  bNbrPorts;
+	__le16 wHubCharacteristics;
+	__u8  bPwrOn2PwrGood;
+	__u8  bHubContrCurrent;
+
+	/* 2.0 and 3.0 hubs differ here */
+	union {
+		struct {
+			/* add 1 bit for hub status change; round to bytes */
+			__u8  DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8];
+			__u8  PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8];
+		}  __attribute__ ((packed)) hs;
+
+		struct {
+			__u8 bHubHdrDecLat;
+			__u16 wHubDelay;
+			__u16 DeviceRemovable;
+		}  __attribute__ ((packed)) ss;
+	} u;
+} __attribute__ ((packed));
+
+/* port indicator status selectors, tables 11-7 and 11-25 */
+#define HUB_LED_AUTO	0
+#define HUB_LED_AMBER	1
+#define HUB_LED_GREEN	2
+#define HUB_LED_OFF	3
+
+enum hub_led_mode {
+	INDICATOR_AUTO = 0,
+	INDICATOR_CYCLE,
+	/* software blinks for attention:  software, hardware, reserved */
+	INDICATOR_GREEN_BLINK, INDICATOR_GREEN_BLINK_OFF,
+	INDICATOR_AMBER_BLINK, INDICATOR_AMBER_BLINK_OFF,
+	INDICATOR_ALT_BLINK, INDICATOR_ALT_BLINK_OFF
+} __attribute__ ((packed));
+
+/* Transaction Translator Think Times, in bits */
+#define HUB_TTTT_8_BITS		0x00
+#define HUB_TTTT_16_BITS	0x20
+#define HUB_TTTT_24_BITS	0x40
+#define HUB_TTTT_32_BITS	0x60
+
+#endif /* __LINUX_CH11_H */
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
new file mode 100644
index 00000000..af21f311
--- /dev/null
+++ b/include/linux/usb/ch9.h
@@ -0,0 +1,946 @@
+/*
+ * This file holds USB constants and structures that are needed for
+ * USB device APIs.  These are used by the USB device model, which is
+ * defined in chapter 9 of the USB 2.0 specification and in the
+ * Wireless USB 1.0 (spread around).  Linux has several APIs in C that
+ * need these:
+ *
+ * - the master/host side Linux-USB kernel driver API;
+ * - the "usbfs" user space API; and
+ * - the Linux "gadget" slave/device/peripheral side driver API.
+ *
+ * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems
+ * act either as a USB master/host or as a USB slave/device.  That means
+ * the master and slave side APIs benefit from working well together.
+ *
+ * There's also "Wireless USB", using low power short range radios for
+ * peripheral interconnection but otherwise building on the USB framework.
+ *
+ * Note all descriptors are declared '__attribute__((packed))' so that:
+ *
+ * [a] they never get padded, either internally (USB spec writers
+ *     probably handled that) or externally;
+ *
+ * [b] so that accessing bigger-than-a-bytes fields will never
+ *     generate bus errors on any platform, even when the location of
+ *     its descriptor inside a bundle isn't "naturally aligned", and
+ *
+ * [c] for consistency, removing all doubt even when it appears to
+ *     someone that the two other points are non-issues for that
+ *     particular descriptor type.
+ */
+
+#ifndef __LINUX_USB_CH9_H
+#define __LINUX_USB_CH9_H
+
+#include <linux/types.h>	/* __u8 etc */
+#include <asm/byteorder.h>	/* le16_to_cpu */
+
+/*-------------------------------------------------------------------------*/
+
+/* CONTROL REQUEST SUPPORT */
+
+/*
+ * USB directions
+ *
+ * This bit flag is used in endpoint descriptors' bEndpointAddress field.
+ * It's also one of three fields in control requests bRequestType.
+ */
+#define USB_DIR_OUT			0		/* to device */
+#define USB_DIR_IN			0x80		/* to host */
+
+/*
+ * USB types, the second of three bRequestType fields
+ */
+#define USB_TYPE_MASK			(0x03 << 5)
+#define USB_TYPE_STANDARD		(0x00 << 5)
+#define USB_TYPE_CLASS			(0x01 << 5)
+#define USB_TYPE_VENDOR			(0x02 << 5)
+#define USB_TYPE_RESERVED		(0x03 << 5)
+
+/*
+ * USB recipients, the third of three bRequestType fields
+ */
+#define USB_RECIP_MASK			0x1f
+#define USB_RECIP_DEVICE		0x00
+#define USB_RECIP_INTERFACE		0x01
+#define USB_RECIP_ENDPOINT		0x02
+#define USB_RECIP_OTHER			0x03
+/* From Wireless USB 1.0 */
+#define USB_RECIP_PORT			0x04
+#define USB_RECIP_RPIPE		0x05
+
+/*
+ * Standard requests, for the bRequest field of a SETUP packet.
+ *
+ * These are qualified by the bRequestType field, so that for example
+ * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved
+ * by a GET_STATUS request.
+ */
+#define USB_REQ_GET_STATUS		0x00
+#define USB_REQ_CLEAR_FEATURE		0x01
+#define USB_REQ_SET_FEATURE		0x03
+#define USB_REQ_SET_ADDRESS		0x05
+#define USB_REQ_GET_DESCRIPTOR		0x06
+#define USB_REQ_SET_DESCRIPTOR		0x07
+#define USB_REQ_GET_CONFIGURATION	0x08
+#define USB_REQ_SET_CONFIGURATION	0x09
+#define USB_REQ_GET_INTERFACE		0x0A
+#define USB_REQ_SET_INTERFACE		0x0B
+#define USB_REQ_SYNCH_FRAME		0x0C
+
+#define USB_REQ_SET_ENCRYPTION		0x0D	/* Wireless USB */
+#define USB_REQ_GET_ENCRYPTION		0x0E
+#define USB_REQ_RPIPE_ABORT		0x0E
+#define USB_REQ_SET_HANDSHAKE		0x0F
+#define USB_REQ_RPIPE_RESET		0x0F
+#define USB_REQ_GET_HANDSHAKE		0x10
+#define USB_REQ_SET_CONNECTION		0x11
+#define USB_REQ_SET_SECURITY_DATA	0x12
+#define USB_REQ_GET_SECURITY_DATA	0x13
+#define USB_REQ_SET_WUSB_DATA		0x14
+#define USB_REQ_LOOPBACK_DATA_WRITE	0x15
+#define USB_REQ_LOOPBACK_DATA_READ	0x16
+#define USB_REQ_SET_INTERFACE_DS	0x17
+
+/* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command,
+ * used by hubs to put ports into a new L1 suspend state, except that it
+ * forgot to define its number ...
+ */
+
+/*
+ * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and
+ * are read as a bit array returned by USB_REQ_GET_STATUS.  (So there
+ * are at most sixteen features of each type.)  Hubs may also support a
+ * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend.
+ */
+#define USB_DEVICE_SELF_POWERED		0	/* (read only) */
+#define USB_DEVICE_REMOTE_WAKEUP	1	/* dev may initiate wakeup */
+#define USB_DEVICE_TEST_MODE		2	/* (wired high speed only) */
+#define USB_DEVICE_BATTERY		2	/* (wireless) */
+#define USB_DEVICE_B_HNP_ENABLE		3	/* (otg) dev may initiate HNP */
+#define USB_DEVICE_WUSB_DEVICE		3	/* (wireless)*/
+#define USB_DEVICE_A_HNP_SUPPORT	4	/* (otg) RH port supports HNP */
+#define USB_DEVICE_A_ALT_HNP_SUPPORT	5	/* (otg) other RH port does */
+#define USB_DEVICE_DEBUG_MODE		6	/* (special devices only) */
+
+/*
+ * Test Mode Selectors
+ * See USB 2.0 spec Table 9-7
+ */
+#define	TEST_J		1
+#define	TEST_K		2
+#define	TEST_SE0_NAK	3
+#define	TEST_PACKET	4
+#define	TEST_FORCE_EN	5
+
+/*
+ * New Feature Selectors as added by USB 3.0
+ * See USB 3.0 spec Table 9-6
+ */
+#define USB_DEVICE_U1_ENABLE	48	/* dev may initiate U1 transition */
+#define USB_DEVICE_U2_ENABLE	49	/* dev may initiate U2 transition */
+#define USB_DEVICE_LTM_ENABLE	50	/* dev may send LTM */
+#define USB_INTRF_FUNC_SUSPEND	0	/* function suspend */
+
+#define USB_INTR_FUNC_SUSPEND_OPT_MASK	0xFF00
+/*
+ * Suspend Options, Table 9-7 USB 3.0 spec
+ */
+#define USB_INTRF_FUNC_SUSPEND_LP	(1 << (8 + 0))
+#define USB_INTRF_FUNC_SUSPEND_RW	(1 << (8 + 1))
+
+#define USB_ENDPOINT_HALT		0	/* IN/OUT will STALL */
+
+/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */
+#define USB_DEV_STAT_U1_ENABLED		2	/* transition into U1 state */
+#define USB_DEV_STAT_U2_ENABLED		3	/* transition into U2 state */
+#define USB_DEV_STAT_LTM_ENABLED	4	/* Latency tolerance messages */
+
+/**
+ * struct usb_ctrlrequest - SETUP data for a USB device control request
+ * @bRequestType: matches the USB bmRequestType field
+ * @bRequest: matches the USB bRequest field
+ * @wValue: matches the USB wValue field (le16 byte order)
+ * @wIndex: matches the USB wIndex field (le16 byte order)
+ * @wLength: matches the USB wLength field (le16 byte order)
+ *
+ * This structure is used to send control requests to a USB device.  It matches
+ * the different fields of the USB 2.0 Spec section 9.3, table 9-2.  See the
+ * USB spec for a fuller description of the different fields, and what they are
+ * used for.
+ *
+ * Note that the driver for any interface can issue control requests.
+ * For most devices, interfaces don't coordinate with each other, so
+ * such requests may be made at any time.
+ */
+struct usb_ctrlrequest {
+	__u8 bRequestType;
+	__u8 bRequest;
+	__le16 wValue;
+	__le16 wIndex;
+	__le16 wLength;
+} __attribute__ ((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or
+ * (rarely) accepted by SET_DESCRIPTOR.
+ *
+ * Note that all multi-byte values here are encoded in little endian
+ * byte order "on the wire".  Within the kernel and when exposed
+ * through the Linux-USB APIs, they are not converted to cpu byte
+ * order; it is the responsibility of the client code to do this.
+ * The single exception is when device and configuration descriptors (but
+ * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD);
+ * in this case the fields are converted to host endianness by the kernel.
+ */
+
+/*
+ * Descriptor types ... USB 2.0 spec table 9.5
+ */
+#define USB_DT_DEVICE			0x01
+#define USB_DT_CONFIG			0x02
+#define USB_DT_STRING			0x03
+#define USB_DT_INTERFACE		0x04
+#define USB_DT_ENDPOINT			0x05
+#define USB_DT_DEVICE_QUALIFIER		0x06
+#define USB_DT_OTHER_SPEED_CONFIG	0x07
+#define USB_DT_INTERFACE_POWER		0x08
+/* these are from a minor usb 2.0 revision (ECN) */
+#define USB_DT_OTG			0x09
+#define USB_DT_DEBUG			0x0a
+#define USB_DT_INTERFACE_ASSOCIATION	0x0b
+/* these are from the Wireless USB spec */
+#define USB_DT_SECURITY			0x0c
+#define USB_DT_KEY			0x0d
+#define USB_DT_ENCRYPTION_TYPE		0x0e
+#define USB_DT_BOS			0x0f
+#define USB_DT_DEVICE_CAPABILITY	0x10
+#define USB_DT_WIRELESS_ENDPOINT_COMP	0x11
+#define USB_DT_WIRE_ADAPTER		0x21
+#define USB_DT_RPIPE			0x22
+#define USB_DT_CS_RADIO_CONTROL		0x23
+/* From the T10 UAS specification */
+#define USB_DT_PIPE_USAGE		0x24
+/* From the USB 3.0 spec */
+#define	USB_DT_SS_ENDPOINT_COMP		0x30
+
+/* Conventional codes for class-specific descriptors.  The convention is
+ * defined in the USB "Common Class" Spec (3.11).  Individual class specs
+ * are authoritative for their usage, not the "common class" writeup.
+ */
+#define USB_DT_CS_DEVICE		(USB_TYPE_CLASS | USB_DT_DEVICE)
+#define USB_DT_CS_CONFIG		(USB_TYPE_CLASS | USB_DT_CONFIG)
+#define USB_DT_CS_STRING		(USB_TYPE_CLASS | USB_DT_STRING)
+#define USB_DT_CS_INTERFACE		(USB_TYPE_CLASS | USB_DT_INTERFACE)
+#define USB_DT_CS_ENDPOINT		(USB_TYPE_CLASS | USB_DT_ENDPOINT)
+
+/* All standard descriptors have these 2 fields at the beginning */
+struct usb_descriptor_header {
+	__u8  bLength;
+	__u8  bDescriptorType;
+} __attribute__ ((packed));
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEVICE: Device descriptor */
+struct usb_device_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__le16 bcdUSB;
+	__u8  bDeviceClass;
+	__u8  bDeviceSubClass;
+	__u8  bDeviceProtocol;
+	__u8  bMaxPacketSize0;
+	__le16 idVendor;
+	__le16 idProduct;
+	__le16 bcdDevice;
+	__u8  iManufacturer;
+	__u8  iProduct;
+	__u8  iSerialNumber;
+	__u8  bNumConfigurations;
+} __attribute__ ((packed));
+
+#define USB_DT_DEVICE_SIZE		18
+
+
+/*
+ * Device and/or Interface Class codes
+ * as found in bDeviceClass or bInterfaceClass
+ * and defined by www.usb.org documents
+ */
+#define USB_CLASS_PER_INTERFACE		0	/* for DeviceClass */
+#define USB_CLASS_AUDIO			1
+#define USB_CLASS_COMM			2
+#define USB_CLASS_HID			3
+#define USB_CLASS_PHYSICAL		5
+#define USB_CLASS_STILL_IMAGE		6
+#define USB_CLASS_PRINTER		7
+#define USB_CLASS_MASS_STORAGE		8
+#define USB_CLASS_HUB			9
+#define USB_CLASS_CDC_DATA		0x0a
+#define USB_CLASS_CSCID			0x0b	/* chip+ smart card */
+#define USB_CLASS_CONTENT_SEC		0x0d	/* content security */
+#define USB_CLASS_VIDEO			0x0e
+#define USB_CLASS_WIRELESS_CONTROLLER	0xe0
+#define USB_CLASS_MISC			0xef
+#define USB_CLASS_APP_SPEC		0xfe
+#define USB_CLASS_VENDOR_SPEC		0xff
+
+#define USB_SUBCLASS_VENDOR_SPEC	0xff
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_CONFIG: Configuration descriptor information.
+ *
+ * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the
+ * descriptor type is different.  Highspeed-capable devices can look
+ * different depending on what speed they're currently running.  Only
+ * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG
+ * descriptors.
+ */
+struct usb_config_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__le16 wTotalLength;
+	__u8  bNumInterfaces;
+	__u8  bConfigurationValue;
+	__u8  iConfiguration;
+	__u8  bmAttributes;
+	__u8  bMaxPower;
+} __attribute__ ((packed));
+
+#define USB_DT_CONFIG_SIZE		9
+
+/* from config descriptor bmAttributes */
+#define USB_CONFIG_ATT_ONE		(1 << 7)	/* must be set */
+#define USB_CONFIG_ATT_SELFPOWER	(1 << 6)	/* self powered */
+#define USB_CONFIG_ATT_WAKEUP		(1 << 5)	/* can wakeup */
+#define USB_CONFIG_ATT_BATTERY		(1 << 4)	/* battery powered */
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_STRING: String descriptor */
+struct usb_string_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__le16 wData[1];		/* UTF-16LE encoded */
+} __attribute__ ((packed));
+
+/* note that "string" zero is special, it holds language codes that
+ * the device supports, not Unicode characters.
+ */
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_INTERFACE: Interface descriptor */
+struct usb_interface_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  bInterfaceNumber;
+	__u8  bAlternateSetting;
+	__u8  bNumEndpoints;
+	__u8  bInterfaceClass;
+	__u8  bInterfaceSubClass;
+	__u8  bInterfaceProtocol;
+	__u8  iInterface;
+} __attribute__ ((packed));
+
+#define USB_DT_INTERFACE_SIZE		9
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_ENDPOINT: Endpoint descriptor */
+struct usb_endpoint_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  bEndpointAddress;
+	__u8  bmAttributes;
+	__le16 wMaxPacketSize;
+	__u8  bInterval;
+
+	/* NOTE:  these two are _only_ in audio endpoints. */
+	/* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */
+	__u8  bRefresh;
+	__u8  bSynchAddress;
+} __attribute__ ((packed));
+
+#define USB_DT_ENDPOINT_SIZE		7
+#define USB_DT_ENDPOINT_AUDIO_SIZE	9	/* Audio extension */
+
+
+/*
+ * Endpoints
+ */
+#define USB_ENDPOINT_NUMBER_MASK	0x0f	/* in bEndpointAddress */
+#define USB_ENDPOINT_DIR_MASK		0x80
+
+#define USB_ENDPOINT_XFERTYPE_MASK	0x03	/* in bmAttributes */
+#define USB_ENDPOINT_XFER_CONTROL	0
+#define USB_ENDPOINT_XFER_ISOC		1
+#define USB_ENDPOINT_XFER_BULK		2
+#define USB_ENDPOINT_XFER_INT		3
+#define USB_ENDPOINT_MAX_ADJUSTABLE	0x80
+
+#define USB_ENDPOINT_SYNCTYPE		0x0c
+#define USB_ENDPOINT_SYNC_NONE		(0 << 2)
+#define USB_ENDPOINT_SYNC_ASYNC		(1 << 2)
+#define USB_ENDPOINT_SYNC_ADAPTIVE	(2 << 2)
+#define USB_ENDPOINT_SYNC_SYNC		(3 << 2)
+
+#define USB_ENDPOINT_USAGE_MASK		0x30
+#define USB_ENDPOINT_USAGE_DATA		0x00
+#define USB_ENDPOINT_USAGE_FEEDBACK	0x10
+#define USB_ENDPOINT_USAGE_IMPLICIT_FB	0x20	/* Implicit feedback Data endpoint */
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * usb_endpoint_num - get the endpoint's number
+ * @epd: endpoint to be checked
+ *
+ * Returns @epd's number: 0 to 15.
+ */
+static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd)
+{
+	return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+}
+
+/**
+ * usb_endpoint_type - get the endpoint's transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according
+ * to @epd's transfer type.
+ */
+static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd)
+{
+	return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+}
+
+/**
+ * usb_endpoint_dir_in - check if the endpoint has IN direction
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type IN, otherwise it returns false.
+ */
+static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd)
+{
+	return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN);
+}
+
+/**
+ * usb_endpoint_dir_out - check if the endpoint has OUT direction
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type OUT, otherwise it returns false.
+ */
+static inline int usb_endpoint_dir_out(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
+}
+
+/**
+ * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type bulk, otherwise it returns false.
+ */
+static inline int usb_endpoint_xfer_bulk(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+		USB_ENDPOINT_XFER_BULK);
+}
+
+/**
+ * usb_endpoint_xfer_control - check if the endpoint has control transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type control, otherwise it returns false.
+ */
+static inline int usb_endpoint_xfer_control(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+		USB_ENDPOINT_XFER_CONTROL);
+}
+
+/**
+ * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type interrupt, otherwise it returns
+ * false.
+ */
+static inline int usb_endpoint_xfer_int(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+		USB_ENDPOINT_XFER_INT);
+}
+
+/**
+ * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type isochronous, otherwise it returns
+ * false.
+ */
+static inline int usb_endpoint_xfer_isoc(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+		USB_ENDPOINT_XFER_ISOC);
+}
+
+/**
+ * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has bulk transfer type and IN direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_bulk_in(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd);
+}
+
+/**
+ * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has bulk transfer type and OUT direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_bulk_out(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd);
+}
+
+/**
+ * usb_endpoint_is_int_in - check if the endpoint is interrupt IN
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has interrupt transfer type and IN direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_int_in(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd);
+}
+
+/**
+ * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has interrupt transfer type and OUT direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_int_out(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd);
+}
+
+/**
+ * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has isochronous transfer type and IN direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_isoc_in(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd);
+}
+
+/**
+ * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has isochronous transfer type and OUT direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_isoc_out(
+				const struct usb_endpoint_descriptor *epd)
+{
+	return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd);
+}
+
+/**
+ * usb_endpoint_maxp - get endpoint's max packet size
+ * @epd: endpoint to be checked
+ *
+ * Returns @epd's max packet
+ */
+static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd)
+{
+	return __le16_to_cpu(epd->wMaxPacketSize);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */
+struct usb_ss_ep_comp_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  bMaxBurst;
+	__u8  bmAttributes;
+	__le16 wBytesPerInterval;
+} __attribute__ ((packed));
+
+#define USB_DT_SS_EP_COMP_SIZE		6
+
+/* Bits 4:0 of bmAttributes if this is a bulk endpoint */
+static inline int
+usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp)
+{
+	int		max_streams;
+
+	if (!comp)
+		return 0;
+
+	max_streams = comp->bmAttributes & 0x1f;
+
+	if (!max_streams)
+		return 0;
+
+	max_streams = 1 << max_streams;
+
+	return max_streams;
+}
+
+/* Bits 1:0 of bmAttributes if this is an isoc endpoint */
+#define USB_SS_MULT(p)			(1 + ((p) & 0x3))
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */
+struct usb_qualifier_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__le16 bcdUSB;
+	__u8  bDeviceClass;
+	__u8  bDeviceSubClass;
+	__u8  bDeviceProtocol;
+	__u8  bMaxPacketSize0;
+	__u8  bNumConfigurations;
+	__u8  bRESERVED;
+} __attribute__ ((packed));
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_OTG (from OTG 1.0a supplement) */
+struct usb_otg_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  bmAttributes;	/* support for HNP, SRP, etc */
+} __attribute__ ((packed));
+
+/* from usb_otg_descriptor.bmAttributes */
+#define USB_OTG_SRP		(1 << 0)
+#define USB_OTG_HNP		(1 << 1)	/* swap host/device roles */
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEBUG:  for special highspeed devices, replacing serial console */
+struct usb_debug_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	/* bulk endpoints with 8 byte maxpacket */
+	__u8  bDebugInEndpoint;
+	__u8  bDebugOutEndpoint;
+} __attribute__((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */
+struct usb_interface_assoc_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  bFirstInterface;
+	__u8  bInterfaceCount;
+	__u8  bFunctionClass;
+	__u8  bFunctionSubClass;
+	__u8  bFunctionProtocol;
+	__u8  iFunction;
+} __attribute__ ((packed));
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_SECURITY:  group of wireless security descriptors, including
+ * encryption types available for setting up a CC/association.
+ */
+struct usb_security_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__le16 wTotalLength;
+	__u8  bNumEncryptionTypes;
+} __attribute__((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_KEY:  used with {GET,SET}_SECURITY_DATA; only public keys
+ * may be retrieved.
+ */
+struct usb_key_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  tTKID[3];
+	__u8  bReserved;
+	__u8  bKeyData[0];
+} __attribute__((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_ENCRYPTION_TYPE:  bundled in DT_SECURITY groups */
+struct usb_encryption_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  bEncryptionType;
+#define	USB_ENC_TYPE_UNSECURE		0
+#define	USB_ENC_TYPE_WIRED		1	/* non-wireless mode */
+#define	USB_ENC_TYPE_CCM_1		2	/* aes128/cbc session */
+#define	USB_ENC_TYPE_RSA_1		3	/* rsa3072/sha1 auth */
+	__u8  bEncryptionValue;		/* use in SET_ENCRYPTION */
+	__u8  bAuthKeyIndex;
+} __attribute__((packed));
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_BOS:  group of device-level capabilities */
+struct usb_bos_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__le16 wTotalLength;
+	__u8  bNumDeviceCaps;
+} __attribute__((packed));
+
+#define USB_DT_BOS_SIZE		5
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEVICE_CAPABILITY:  grouped with BOS */
+struct usb_dev_cap_header {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDevCapabilityType;
+} __attribute__((packed));
+
+#define	USB_CAP_TYPE_WIRELESS_USB	1
+
+struct usb_wireless_cap_descriptor {	/* Ultra Wide Band */
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDevCapabilityType;
+
+	__u8  bmAttributes;
+#define	USB_WIRELESS_P2P_DRD		(1 << 1)
+#define	USB_WIRELESS_BEACON_MASK	(3 << 2)
+#define	USB_WIRELESS_BEACON_SELF	(1 << 2)
+#define	USB_WIRELESS_BEACON_DIRECTED	(2 << 2)
+#define	USB_WIRELESS_BEACON_NONE	(3 << 2)
+	__le16 wPHYRates;	/* bit rates, Mbps */
+#define	USB_WIRELESS_PHY_53		(1 << 0)	/* always set */
+#define	USB_WIRELESS_PHY_80		(1 << 1)
+#define	USB_WIRELESS_PHY_107		(1 << 2)	/* always set */
+#define	USB_WIRELESS_PHY_160		(1 << 3)
+#define	USB_WIRELESS_PHY_200		(1 << 4)	/* always set */
+#define	USB_WIRELESS_PHY_320		(1 << 5)
+#define	USB_WIRELESS_PHY_400		(1 << 6)
+#define	USB_WIRELESS_PHY_480		(1 << 7)
+	__u8  bmTFITXPowerInfo;	/* TFI power levels */
+	__u8  bmFFITXPowerInfo;	/* FFI power levels */
+	__le16 bmBandGroup;
+	__u8  bReserved;
+} __attribute__((packed));
+
+/* USB 2.0 Extension descriptor */
+#define	USB_CAP_TYPE_EXT		2
+
+struct usb_ext_cap_descriptor {		/* Link Power Management */
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDevCapabilityType;
+	__le32 bmAttributes;
+#define USB_LPM_SUPPORT			(1 << 1)	/* supports LPM */
+#define USB_BESL_SUPPORT		(1 << 2)	/* supports BESL */
+#define USB_BESL_BASELINE_VALID		(1 << 3)	/* Baseline BESL valid*/
+#define USB_BESL_DEEP_VALID		(1 << 4)	/* Deep BESL valid */
+#define USB_GET_BESL_BASELINE(p)	(((p) & (0xf << 8)) >> 8)
+#define USB_GET_BESL_DEEP(p)		(((p) & (0xf << 12)) >> 12)
+} __attribute__((packed));
+
+#define USB_DT_USB_EXT_CAP_SIZE	7
+
+/*
+ * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB
+ * specific device level capabilities
+ */
+#define		USB_SS_CAP_TYPE		3
+struct usb_ss_cap_descriptor {		/* Link Power Management */
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDevCapabilityType;
+	__u8  bmAttributes;
+#define USB_LTM_SUPPORT			(1 << 1) /* supports LTM */
+	__le16 wSpeedSupported;
+#define USB_LOW_SPEED_OPERATION		(1)	 /* Low speed operation */
+#define USB_FULL_SPEED_OPERATION	(1 << 1) /* Full speed operation */
+#define USB_HIGH_SPEED_OPERATION	(1 << 2) /* High speed operation */
+#define USB_5GBPS_OPERATION		(1 << 3) /* Operation at 5Gbps */
+	__u8  bFunctionalitySupport;
+	__u8  bU1devExitLat;
+	__le16 bU2DevExitLat;
+} __attribute__((packed));
+
+#define USB_DT_USB_SS_CAP_SIZE	10
+
+/*
+ * Container ID Capability descriptor: Defines the instance unique ID used to
+ * identify the instance across all operating modes
+ */
+#define	CONTAINER_ID_TYPE	4
+struct usb_ss_container_id_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDevCapabilityType;
+	__u8  bReserved;
+	__u8  ContainerID[16]; /* 128-bit number */
+} __attribute__((packed));
+
+#define USB_DT_USB_SS_CONTN_ID_SIZE	20
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_WIRELESS_ENDPOINT_COMP:  companion descriptor associated with
+ * each endpoint descriptor for a wireless device
+ */
+struct usb_wireless_ep_comp_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  bMaxBurst;
+	__u8  bMaxSequence;
+	__le16 wMaxStreamDelay;
+	__le16 wOverTheAirPacketSize;
+	__u8  bOverTheAirInterval;
+	__u8  bmCompAttributes;
+#define USB_ENDPOINT_SWITCH_MASK	0x03	/* in bmCompAttributes */
+#define USB_ENDPOINT_SWITCH_NO		0
+#define USB_ENDPOINT_SWITCH_SWITCH	1
+#define USB_ENDPOINT_SWITCH_SCALE	2
+} __attribute__((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless
+ * host and a device for connection set up, mutual authentication, and
+ * exchanging short lived session keys.  The handshake depends on a CC.
+ */
+struct usb_handshake {
+	__u8 bMessageNumber;
+	__u8 bStatus;
+	__u8 tTKID[3];
+	__u8 bReserved;
+	__u8 CDID[16];
+	__u8 nonce[16];
+	__u8 MIC[8];
+} __attribute__((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC).
+ * A CC may also be set up using non-wireless secure channels (including
+ * wired USB!), and some devices may support CCs with multiple hosts.
+ */
+struct usb_connection_context {
+	__u8 CHID[16];		/* persistent host id */
+	__u8 CDID[16];		/* device id (unique w/in host context) */
+	__u8 CK[16];		/* connection key */
+} __attribute__((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* USB 2.0 defines three speeds, here's how Linux identifies them */
+
+enum usb_device_speed {
+	USB_SPEED_UNKNOWN = 0,			/* enumerating */
+	USB_SPEED_LOW, USB_SPEED_FULL,		/* usb 1.1 */
+	USB_SPEED_HIGH,				/* usb 2.0 */
+	USB_SPEED_WIRELESS,			/* wireless (usb 2.5) */
+	USB_SPEED_SUPER,			/* usb 3.0 */
+};
+
+#ifdef __KERNEL__
+
+/**
+ * usb_speed_string() - Returns human readable-name of the speed.
+ * @speed: The speed to return human-readable name for.  If it's not
+ *   any of the speeds defined in usb_device_speed enum, string for
+ *   USB_SPEED_UNKNOWN will be returned.
+ */
+extern const char *usb_speed_string(enum usb_device_speed speed);
+
+#endif
+
+enum usb_device_state {
+	/* NOTATTACHED isn't in the USB spec, and this state acts
+	 * the same as ATTACHED ... but it's clearer this way.
+	 */
+	USB_STATE_NOTATTACHED = 0,
+
+	/* chapter 9 and authentication (wireless) device states */
+	USB_STATE_ATTACHED,
+	USB_STATE_POWERED,			/* wired */
+	USB_STATE_RECONNECTING,			/* auth */
+	USB_STATE_UNAUTHENTICATED,		/* auth */
+	USB_STATE_DEFAULT,			/* limited function */
+	USB_STATE_ADDRESS,
+	USB_STATE_CONFIGURED,			/* most functions */
+
+	USB_STATE_SUSPENDED
+
+	/* NOTE:  there are actually four different SUSPENDED
+	 * states, returning to POWERED, DEFAULT, ADDRESS, or
+	 * CONFIGURED respectively when SOF tokens flow again.
+	 * At this level there's no difference between L1 and L2
+	 * suspend states.  (L2 being original USB 1.1 suspend.)
+	 */
+};
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * As per USB compliance update, a device that is actively drawing
+ * more than 100mA from USB must report itself as bus-powered in
+ * the GetStatus(DEVICE) call.
+ * http://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34
+ */
+#define USB_SELF_POWER_VBUS_MAX_DRAW		100
+
+#endif /* __LINUX_USB_CH9_H */
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
new file mode 100644
index 00000000..6938a860
--- /dev/null
+++ b/include/linux/usb/composite.h
@@ -0,0 +1,388 @@
+/*
+ * composite.h -- framework for usb gadgets which are composite devices
+ *
+ * Copyright (C) 2006-2008 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef	__LINUX_USB_COMPOSITE_H
+#define	__LINUX_USB_COMPOSITE_H
+
+/*
+ * This framework is an optional layer on top of the USB Gadget interface,
+ * making it easier to build (a) Composite devices, supporting multiple
+ * functions within any single configuration, and (b) Multi-configuration
+ * devices, also supporting multiple functions but without necessarily
+ * having more than one function per configuration.
+ *
+ * Example:  a device with a single configuration supporting both network
+ * link and mass storage functions is a composite device.  Those functions
+ * might alternatively be packaged in individual configurations, but in
+ * the composite model the host can use both functions at the same time.
+ */
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+/*
+ * USB function drivers should return USB_GADGET_DELAYED_STATUS if they
+ * wish to delay the data/status stages of the control transfer till they
+ * are ready. The control transfer will then be kept from completing till
+ * all the function drivers that requested for USB_GADGET_DELAYED_STAUS
+ * invoke usb_composite_setup_continue().
+ */
+#define USB_GADGET_DELAYED_STATUS       0x7fff	/* Impossibly large value */
+
+struct usb_configuration;
+
+/**
+ * struct usb_function - describes one function of a configuration
+ * @name: For diagnostics, identifies the function.
+ * @strings: tables of strings, keyed by identifiers assigned during bind()
+ *	and by language IDs provided in control requests
+ * @descriptors: Table of full (or low) speed descriptors, using interface and
+ *	string identifiers assigned during @bind().  If this pointer is null,
+ *	the function will not be available at full speed (or at low speed).
+ * @hs_descriptors: Table of high speed descriptors, using interface and
+ *	string identifiers assigned during @bind().  If this pointer is null,
+ *	the function will not be available at high speed.
+ * @ss_descriptors: Table of super speed descriptors, using interface and
+ *	string identifiers assigned during @bind(). If this
+ *	pointer is null after initiation, the function will not
+ *	be available at super speed.
+ * @config: assigned when @usb_add_function() is called; this is the
+ *	configuration with which this function is associated.
+ * @bind: Before the gadget can register, all of its functions bind() to the
+ *	available resources including string and interface identifiers used
+ *	in interface or class descriptors; endpoints; I/O buffers; and so on.
+ * @unbind: Reverses @bind; called as a side effect of unregistering the
+ *	driver which added this function.
+ * @set_alt: (REQUIRED) Reconfigures altsettings; function drivers may
+ *	initialize usb_ep.driver data at this time (when it is used).
+ *	Note that setting an interface to its current altsetting resets
+ *	interface state, and that all interfaces have a disabled state.
+ * @get_alt: Returns the active altsetting.  If this is not provided,
+ *	then only altsetting zero is supported.
+ * @disable: (REQUIRED) Indicates the function should be disabled.  Reasons
+ *	include host resetting or reconfiguring the gadget, and disconnection.
+ * @setup: Used for interface-specific control requests.
+ * @suspend: Notifies functions when the host stops sending USB traffic.
+ * @resume: Notifies functions when the host restarts USB traffic.
+ * @get_status: Returns function status as a reply to
+ *	GetStatus() request when the recepient is Interface.
+ * @func_suspend: callback to be called when
+ *	SetFeature(FUNCTION_SUSPEND) is reseived
+ *
+ * A single USB function uses one or more interfaces, and should in most
+ * cases support operation at both full and high speeds.  Each function is
+ * associated by @usb_add_function() with a one configuration; that function
+ * causes @bind() to be called so resources can be allocated as part of
+ * setting up a gadget driver.  Those resources include endpoints, which
+ * should be allocated using @usb_ep_autoconfig().
+ *
+ * To support dual speed operation, a function driver provides descriptors
+ * for both high and full speed operation.  Except in rare cases that don't
+ * involve bulk endpoints, each speed needs different endpoint descriptors.
+ *
+ * Function drivers choose their own strategies for managing instance data.
+ * The simplest strategy just declares it "static', which means the function
+ * can only be activated once.  If the function needs to be exposed in more
+ * than one configuration at a given speed, it needs to support multiple
+ * usb_function structures (one for each configuration).
+ *
+ * A more complex strategy might encapsulate a @usb_function structure inside
+ * a driver-specific instance structure to allows multiple activations.  An
+ * example of multiple activations might be a CDC ACM function that supports
+ * two or more distinct instances within the same configuration, providing
+ * several independent logical data links to a USB host.
+ */
+struct usb_function {
+	const char			*name;
+	struct usb_gadget_strings	**strings;
+	struct usb_descriptor_header	**descriptors;
+	struct usb_descriptor_header	**hs_descriptors;
+	struct usb_descriptor_header	**ss_descriptors;
+
+	struct usb_configuration	*config;
+
+	/* REVISIT:  bind() functions can be marked __init, which
+	 * makes trouble for section mismatch analysis.  See if
+	 * we can't restructure things to avoid mismatching.
+	 * Related:  unbind() may kfree() but bind() won't...
+	 */
+
+	/* configuration management:  bind/unbind */
+	int			(*bind)(struct usb_configuration *,
+					struct usb_function *);
+	void			(*unbind)(struct usb_configuration *,
+					struct usb_function *);
+
+	/* runtime state management */
+	int			(*set_alt)(struct usb_function *,
+					unsigned interface, unsigned alt);
+	int			(*get_alt)(struct usb_function *,
+					unsigned interface);
+	void			(*disable)(struct usb_function *);
+	int			(*setup)(struct usb_function *,
+					const struct usb_ctrlrequest *);
+	void			(*suspend)(struct usb_function *);
+	void			(*resume)(struct usb_function *);
+
+	/* USB 3.0 additions */
+	int			(*get_status)(struct usb_function *);
+	int			(*func_suspend)(struct usb_function *,
+						u8 suspend_opt);
+	/* private: */
+	/* internals */
+	struct list_head		list;
+	DECLARE_BITMAP(endpoints, 32);
+};
+
+int usb_add_function(struct usb_configuration *, struct usb_function *);
+
+int usb_function_deactivate(struct usb_function *);
+int usb_function_activate(struct usb_function *);
+
+int usb_interface_id(struct usb_configuration *, struct usb_function *);
+
+int config_ep_by_speed(struct usb_gadget *g, struct usb_function *f,
+			struct usb_ep *_ep);
+
+#define	MAX_CONFIG_INTERFACES		16	/* arbitrary; max 255 */
+
+/**
+ * struct usb_configuration - represents one gadget configuration
+ * @label: For diagnostics, describes the configuration.
+ * @strings: Tables of strings, keyed by identifiers assigned during @bind()
+ *	and by language IDs provided in control requests.
+ * @descriptors: Table of descriptors preceding all function descriptors.
+ *	Examples include OTG and vendor-specific descriptors.
+ * @unbind: Reverses @bind; called as a side effect of unregistering the
+ *	driver which added this configuration.
+ * @setup: Used to delegate control requests that aren't handled by standard
+ *	device infrastructure or directed at a specific interface.
+ * @bConfigurationValue: Copied into configuration descriptor.
+ * @iConfiguration: Copied into configuration descriptor.
+ * @bmAttributes: Copied into configuration descriptor.
+ * @bMaxPower: Copied into configuration descriptor.
+ * @cdev: assigned by @usb_add_config() before calling @bind(); this is
+ *	the device associated with this configuration.
+ *
+ * Configurations are building blocks for gadget drivers structured around
+ * function drivers.  Simple USB gadgets require only one function and one
+ * configuration, and handle dual-speed hardware by always providing the same
+ * functionality.  Slightly more complex gadgets may have more than one
+ * single-function configuration at a given speed; or have configurations
+ * that only work at one speed.
+ *
+ * Composite devices are, by definition, ones with configurations which
+ * include more than one function.
+ *
+ * The lifecycle of a usb_configuration includes allocation, initialization
+ * of the fields described above, and calling @usb_add_config() to set up
+ * internal data and bind it to a specific device.  The configuration's
+ * @bind() method is then used to initialize all the functions and then
+ * call @usb_add_function() for them.
+ *
+ * Those functions would normally be independent of each other, but that's
+ * not mandatory.  CDC WMC devices are an example where functions often
+ * depend on other functions, with some functions subsidiary to others.
+ * Such interdependency may be managed in any way, so long as all of the
+ * descriptors complete by the time the composite driver returns from
+ * its bind() routine.
+ */
+struct usb_configuration {
+	const char			*label;
+	struct usb_gadget_strings	**strings;
+	const struct usb_descriptor_header **descriptors;
+
+	/* REVISIT:  bind() functions can be marked __init, which
+	 * makes trouble for section mismatch analysis.  See if
+	 * we can't restructure things to avoid mismatching...
+	 */
+
+	/* configuration management: unbind/setup */
+	void			(*unbind)(struct usb_configuration *);
+	int			(*setup)(struct usb_configuration *,
+					const struct usb_ctrlrequest *);
+
+	/* fields in the config descriptor */
+	u8			bConfigurationValue;
+	u8			iConfiguration;
+	u8			bmAttributes;
+	u8			bMaxPower;
+
+	struct usb_composite_dev	*cdev;
+
+	/* private: */
+	/* internals */
+	struct list_head	list;
+	struct list_head	functions;
+	u8			next_interface_id;
+	unsigned		superspeed:1;
+	unsigned		highspeed:1;
+	unsigned		fullspeed:1;
+	struct usb_function	*interface[MAX_CONFIG_INTERFACES];
+};
+
+int usb_add_config(struct usb_composite_dev *,
+		struct usb_configuration *,
+		int (*)(struct usb_configuration *));
+
+int usb_remove_config(struct usb_composite_dev *,
+		struct usb_configuration *);
+
+/**
+ * struct usb_composite_driver - groups configurations into a gadget
+ * @name: For diagnostics, identifies the driver.
+ * @iProduct: Used as iProduct override if @dev->iProduct is not set.
+ *	If NULL value of @name is taken.
+ * @iManufacturer: Used as iManufacturer override if @dev->iManufacturer is
+ *	not set. If NULL a default "<system> <release> with <udc>" value
+ *	will be used.
+ * @dev: Template descriptor for the device, including default device
+ *	identifiers.
+ * @strings: tables of strings, keyed by identifiers assigned during bind()
+ *	and language IDs provided in control requests
+ * @max_speed: Highest speed the driver supports.
+ * @needs_serial: set to 1 if the gadget needs userspace to provide
+ * 	a serial number.  If one is not provided, warning will be printed.
+ * @unbind: Reverses bind; called as a side effect of unregistering
+ *	this driver.
+ * @disconnect: optional driver disconnect method
+ * @suspend: Notifies when the host stops sending USB traffic,
+ *	after function notifications
+ * @resume: Notifies configuration when the host restarts USB traffic,
+ *	before function notifications
+ *
+ * Devices default to reporting self powered operation.  Devices which rely
+ * on bus powered operation should report this in their @bind() method.
+ *
+ * Before returning from bind, various fields in the template descriptor
+ * may be overridden.  These include the idVendor/idProduct/bcdDevice values
+ * normally to bind the appropriate host side driver, and the three strings
+ * (iManufacturer, iProduct, iSerialNumber) normally used to provide user
+ * meaningful device identifiers.  (The strings will not be defined unless
+ * they are defined in @dev and @strings.)  The correct ep0 maxpacket size
+ * is also reported, as defined by the underlying controller driver.
+ */
+struct usb_composite_driver {
+	const char				*name;
+	const char				*iProduct;
+	const char				*iManufacturer;
+	const struct usb_device_descriptor	*dev;
+	struct usb_gadget_strings		**strings;
+	enum usb_device_speed			max_speed;
+	unsigned		needs_serial:1;
+
+	int			(*unbind)(struct usb_composite_dev *);
+
+	void			(*disconnect)(struct usb_composite_dev *);
+
+	/* global suspend hooks */
+	void			(*suspend)(struct usb_composite_dev *);
+	void			(*resume)(struct usb_composite_dev *);
+};
+
+extern int usb_composite_probe(struct usb_composite_driver *driver,
+			       int (*bind)(struct usb_composite_dev *cdev));
+extern void usb_composite_unregister(struct usb_composite_driver *driver);
+extern void usb_composite_setup_continue(struct usb_composite_dev *cdev);
+
+
+/**
+ * struct usb_composite_device - represents one composite usb gadget
+ * @gadget: read-only, abstracts the gadget's usb peripheral controller
+ * @req: used for control responses; buffer is pre-allocated
+ * @bufsiz: size of buffer pre-allocated in @req
+ * @config: the currently active configuration
+ *
+ * One of these devices is allocated and initialized before the
+ * associated device driver's bind() is called.
+ *
+ * OPEN ISSUE:  it appears that some WUSB devices will need to be
+ * built by combining a normal (wired) gadget with a wireless one.
+ * This revision of the gadget framework should probably try to make
+ * sure doing that won't hurt too much.
+ *
+ * One notion for how to handle Wireless USB devices involves:
+ * (a) a second gadget here, discovery mechanism TBD, but likely
+ *     needing separate "register/unregister WUSB gadget" calls;
+ * (b) updates to usb_gadget to include flags "is it wireless",
+ *     "is it wired", plus (presumably in a wrapper structure)
+ *     bandgroup and PHY info;
+ * (c) presumably a wireless_ep wrapping a usb_ep, and reporting
+ *     wireless-specific parameters like maxburst and maxsequence;
+ * (d) configurations that are specific to wireless links;
+ * (e) function drivers that understand wireless configs and will
+ *     support wireless for (additional) function instances;
+ * (f) a function to support association setup (like CBAF), not
+ *     necessarily requiring a wireless adapter;
+ * (g) composite device setup that can create one or more wireless
+ *     configs, including appropriate association setup support;
+ * (h) more, TBD.
+ */
+struct usb_composite_dev {
+	struct usb_gadget		*gadget;
+	struct usb_request		*req;
+	unsigned			bufsiz;
+
+	struct usb_configuration	*config;
+
+	/* private: */
+	/* internals */
+	unsigned int			suspended:1;
+	struct usb_device_descriptor	desc;
+	struct list_head		configs;
+	struct usb_composite_driver	*driver;
+	u8				next_string_id;
+	u8				manufacturer_override;
+	u8				product_override;
+	u8				serial_override;
+
+	/* the gadget driver won't enable the data pullup
+	 * while the deactivation count is nonzero.
+	 */
+	unsigned			deactivations;
+
+	/* the composite driver won't complete the control transfer's
+	 * data/status stages till delayed_status is zero.
+	 */
+	int				delayed_status;
+
+	/* protects deactivations and delayed_status counts*/
+	spinlock_t			lock;
+};
+
+extern int usb_string_id(struct usb_composite_dev *c);
+extern int usb_string_ids_tab(struct usb_composite_dev *c,
+			      struct usb_string *str);
+extern int usb_string_ids_n(struct usb_composite_dev *c, unsigned n);
+
+
+/* messaging utils */
+#define DBG(d, fmt, args...) \
+	dev_dbg(&(d)->gadget->dev , fmt , ## args)
+#define VDBG(d, fmt, args...) \
+	dev_vdbg(&(d)->gadget->dev , fmt , ## args)
+#define ERROR(d, fmt, args...) \
+	dev_err(&(d)->gadget->dev , fmt , ## args)
+#define WARNING(d, fmt, args...) \
+	dev_warn(&(d)->gadget->dev , fmt , ## args)
+#define INFO(d, fmt, args...) \
+	dev_info(&(d)->gadget->dev , fmt , ## args)
+
+#endif	/* __LINUX_USB_COMPOSITE_H */
diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h
new file mode 100644
index 00000000..7cc95ee3
--- /dev/null
+++ b/include/linux/usb/ehci_def.h
@@ -0,0 +1,225 @@
+/*
+ * Copyright (c) 2001-2002 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_USB_EHCI_DEF_H
+#define __LINUX_USB_EHCI_DEF_H
+
+/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
+
+/* Section 2.2 Host Controller Capability Registers */
+struct ehci_caps {
+	/* these fields are specified as 8 and 16 bit registers,
+	 * but some hosts can't perform 8 or 16 bit PCI accesses.
+	 * some hosts treat caplength and hciversion as parts of a 32-bit
+	 * register, others treat them as two separate registers, this
+	 * affects the memory map for big endian controllers.
+	 */
+	u32		hc_capbase;
+#define HC_LENGTH(ehci, p)	(0x00ff&((p) >> /* bits 7:0 / offset 00h */ \
+				(ehci_big_endian_capbase(ehci) ? 24 : 0)))
+#define HC_VERSION(ehci, p)	(0xffff&((p) >> /* bits 31:16 / offset 02h */ \
+				(ehci_big_endian_capbase(ehci) ? 0 : 16)))
+	u32		hcs_params;     /* HCSPARAMS - offset 0x4 */
+#define HCS_DEBUG_PORT(p)	(((p)>>20)&0xf)	/* bits 23:20, debug port? */
+#define HCS_INDICATOR(p)	((p)&(1 << 16))	/* true: has port indicators */
+#define HCS_N_CC(p)		(((p)>>12)&0xf)	/* bits 15:12, #companion HCs */
+#define HCS_N_PCC(p)		(((p)>>8)&0xf)	/* bits 11:8, ports per CC */
+#define HCS_PORTROUTED(p)	((p)&(1 << 7))	/* true: port routing */
+#define HCS_PPC(p)		((p)&(1 << 4))	/* true: port power control */
+#define HCS_N_PORTS(p)		(((p)>>0)&0xf)	/* bits 3:0, ports on HC */
+
+	u32		hcc_params;      /* HCCPARAMS - offset 0x8 */
+/* EHCI 1.1 addendum */
+#define HCC_32FRAME_PERIODIC_LIST(p)	((p)&(1 << 19))
+#define HCC_PER_PORT_CHANGE_EVENT(p)	((p)&(1 << 18))
+#define HCC_LPM(p)			((p)&(1 << 17))
+#define HCC_HW_PREFETCH(p)		((p)&(1 << 16))
+
+#define HCC_EXT_CAPS(p)		(((p)>>8)&0xff)	/* for pci extended caps */
+#define HCC_ISOC_CACHE(p)       ((p)&(1 << 7))  /* true: can cache isoc frame */
+#define HCC_ISOC_THRES(p)       (((p)>>4)&0x7)  /* bits 6:4, uframes cached */
+#define HCC_CANPARK(p)		((p)&(1 << 2))  /* true: can park on async qh */
+#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1))  /* true: periodic_size changes*/
+#define HCC_64BIT_ADDR(p)       ((p)&(1))       /* true: can use 64-bit addr */
+	u8		portroute[8];	 /* nibbles for routing - offset 0xC */
+};
+
+
+/* Section 2.3 Host Controller Operational Registers */
+struct ehci_regs {
+
+	/* USBCMD: offset 0x00 */
+	u32		command;
+
+/* EHCI 1.1 addendum */
+#define CMD_HIRD	(0xf<<24)	/* host initiated resume duration */
+#define CMD_PPCEE	(1<<15)		/* per port change event enable */
+#define CMD_FSP		(1<<14)		/* fully synchronized prefetch */
+#define CMD_ASPE	(1<<13)		/* async schedule prefetch enable */
+#define CMD_PSPE	(1<<12)		/* periodic schedule prefetch enable */
+/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
+#define CMD_PARK	(1<<11)		/* enable "park" on async qh */
+#define CMD_PARK_CNT(c)	(((c)>>8)&3)	/* how many transfers to park for */
+#define CMD_LRESET	(1<<7)		/* partial reset (no ports, etc) */
+#define CMD_IAAD	(1<<6)		/* "doorbell" interrupt async advance */
+#define CMD_ASE		(1<<5)		/* async schedule enable */
+#define CMD_PSE		(1<<4)		/* periodic schedule enable */
+/* 3:2 is periodic frame list size */
+#define CMD_RESET	(1<<1)		/* reset HC not bus */
+#define CMD_RUN		(1<<0)		/* start/stop HC */
+
+	/* USBSTS: offset 0x04 */
+	u32		status;
+#define STS_PPCE_MASK	(0xff<<16)	/* Per-Port change event 1-16 */
+#define STS_ASS		(1<<15)		/* Async Schedule Status */
+#define STS_PSS		(1<<14)		/* Periodic Schedule Status */
+#define STS_RECL	(1<<13)		/* Reclamation */
+#define STS_HALT	(1<<12)		/* Not running (any reason) */
+/* some bits reserved */
+	/* these STS_* flags are also intr_enable bits (USBINTR) */
+#define STS_IAA		(1<<5)		/* Interrupted on async advance */
+#define STS_FATAL	(1<<4)		/* such as some PCI access errors */
+#define STS_FLR		(1<<3)		/* frame list rolled over */
+#define STS_PCD		(1<<2)		/* port change detect */
+#define STS_ERR		(1<<1)		/* "error" completion (overflow, ...) */
+#define STS_INT		(1<<0)		/* "normal" completion (short, ...) */
+
+	/* USBINTR: offset 0x08 */
+	u32		intr_enable;
+
+	/* FRINDEX: offset 0x0C */
+	u32		frame_index;	/* current microframe number */
+	/* CTRLDSSEGMENT: offset 0x10 */
+	u32		segment;	/* address bits 63:32 if needed */
+	/* PERIODICLISTBASE: offset 0x14 */
+	u32		frame_list;	/* points to periodic list */
+	/* ASYNCLISTADDR: offset 0x18 */
+	u32		async_next;	/* address of next async queue head */
+
+	u32		reserved[9];
+
+	/* CONFIGFLAG: offset 0x40 */
+	u32		configured_flag;
+#define FLAG_CF		(1<<0)		/* true: we'll support "high speed" */
+
+	/* PORTSC: offset 0x44 */
+	u32		port_status[0];	/* up to N_PORTS */
+/* EHCI 1.1 addendum */
+#define PORTSC_SUSPEND_STS_ACK 0
+#define PORTSC_SUSPEND_STS_NYET 1
+#define PORTSC_SUSPEND_STS_STALL 2
+#define PORTSC_SUSPEND_STS_ERR 3
+
+#define PORT_DEV_ADDR	(0x7f<<25)		/* device address */
+#define PORT_SSTS	(0x3<<23)		/* suspend status */
+/* 31:23 reserved */
+#define PORT_WKOC_E	(1<<22)		/* wake on overcurrent (enable) */
+#define PORT_WKDISC_E	(1<<21)		/* wake on disconnect (enable) */
+#define PORT_WKCONN_E	(1<<20)		/* wake on connect (enable) */
+/* 19:16 for port testing */
+#define PORT_TEST(x)	(((x)&0xf)<<16)	/* Port Test Control */
+#define PORT_TEST_PKT	PORT_TEST(0x4)	/* Port Test Control - packet test */
+#define PORT_TEST_FORCE	PORT_TEST(0x5)	/* Port Test Control - force enable */
+#define PORT_LED_OFF	(0<<14)
+#define PORT_LED_AMBER	(1<<14)
+#define PORT_LED_GREEN	(2<<14)
+#define PORT_LED_MASK	(3<<14)
+#define PORT_OWNER	(1<<13)		/* true: companion hc owns this port */
+#define PORT_POWER	(1<<12)		/* true: has power (see PPC) */
+#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10))	/* USB 1.1 device */
+/* 11:10 for detecting lowspeed devices (reset vs release ownership) */
+/* 9 reserved */
+#define PORT_LPM	(1<<9)		/* LPM transaction */
+#define PORT_RESET	(1<<8)		/* reset port */
+#define PORT_SUSPEND	(1<<7)		/* suspend port */
+#define PORT_RESUME	(1<<6)		/* resume it */
+#define PORT_OCC	(1<<5)		/* over current change */
+#define PORT_OC		(1<<4)		/* over current active */
+#define PORT_PEC	(1<<3)		/* port enable change */
+#define PORT_PE		(1<<2)		/* port enable */
+#define PORT_CSC	(1<<1)		/* connect status change */
+#define PORT_CONNECT	(1<<0)		/* device connected */
+#define PORT_RWC_BITS   (PORT_CSC | PORT_PEC | PORT_OCC)
+};
+
+#define USBMODE		0x68		/* USB Device mode */
+#define USBMODE_SDIS	(1<<3)		/* Stream disable */
+#define USBMODE_BE	(1<<2)		/* BE/LE endianness select */
+#define USBMODE_CM_HC	(3<<0)		/* host controller mode */
+#define USBMODE_CM_IDLE	(0<<0)		/* idle state */
+
+/* Moorestown has some non-standard registers, partially due to the fact that
+ * its EHCI controller has both TT and LPM support. HOSTPCx are extensions to
+ * PORTSCx
+ */
+#define HOSTPC0		0x84		/* HOSTPC extension */
+#define HOSTPC_PHCD	(1<<22)		/* Phy clock disable */
+#define HOSTPC_PSPD	(3<<25)		/* Port speed detection */
+#define USBMODE_EX	0xc8		/* USB Device mode extension */
+#define USBMODE_EX_VBPS	(1<<5)		/* VBus Power Select On */
+#define USBMODE_EX_HC	(3<<0)		/* host controller mode */
+#define TXFILLTUNING	0x24		/* TX FIFO Tuning register */
+#define TXFIFO_DEFAULT	(8<<16)		/* FIFO burst threshold 8 */
+
+/* Appendix C, Debug port ... intended for use with special "debug devices"
+ * that can help if there's no serial console.  (nonstandard enumeration.)
+ */
+struct ehci_dbg_port {
+	u32	control;
+#define DBGP_OWNER	(1<<30)
+#define DBGP_ENABLED	(1<<28)
+#define DBGP_DONE	(1<<16)
+#define DBGP_INUSE	(1<<10)
+#define DBGP_ERRCODE(x)	(((x)>>7)&0x07)
+#	define DBGP_ERR_BAD	1
+#	define DBGP_ERR_SIGNAL	2
+#define DBGP_ERROR	(1<<6)
+#define DBGP_GO		(1<<5)
+#define DBGP_OUT	(1<<4)
+#define DBGP_LEN(x)	(((x)>>0)&0x0f)
+	u32	pids;
+#define DBGP_PID_GET(x)		(((x)>>16)&0xff)
+#define DBGP_PID_SET(data, tok)	(((data)<<8)|(tok))
+	u32	data03;
+	u32	data47;
+	u32	address;
+#define DBGP_EPADDR(dev, ep)	(((dev)<<8)|(ep))
+};
+
+#ifdef CONFIG_EARLY_PRINTK_DBGP
+#include <linux/init.h>
+extern int __init early_dbgp_init(char *s);
+extern struct console early_dbgp_console;
+#endif /* CONFIG_EARLY_PRINTK_DBGP */
+
+#ifdef CONFIG_EARLY_PRINTK_DBGP
+/* Call backs from ehci host driver to ehci debug driver */
+extern int dbgp_external_startup(void);
+extern int dbgp_reset_prep(void);
+#else
+static inline int dbgp_reset_prep(void)
+{
+	return 1;
+}
+static inline int dbgp_external_startup(void)
+{
+	return -1;
+}
+#endif
+
+#endif /* __LINUX_USB_EHCI_DEF_H */
diff --git a/include/linux/usb/ehci_pdriver.h b/include/linux/usb/ehci_pdriver.h
new file mode 100644
index 00000000..1894f42f
--- /dev/null
+++ b/include/linux/usb/ehci_pdriver.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2012 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __USB_CORE_EHCI_PDRIVER_H
+#define __USB_CORE_EHCI_PDRIVER_H
+
+/**
+ * struct usb_ehci_pdata - platform_data for generic ehci driver
+ *
+ * @caps_offset:	offset of the EHCI Capability Registers to the start of
+ *			the io memory region provided to the driver.
+ * @has_tt:		set to 1 if TT is integrated in root hub.
+ * @port_power_on:	set to 1 if the controller needs a power up after
+ *			initialization.
+ * @port_power_off:	set to 1 if the controller needs to be powered down
+ *			after initialization.
+ *
+ * These are general configuration options for the EHCI controller. All of
+ * these options are activating more or less workarounds for some hardware.
+ */
+struct usb_ehci_pdata {
+	int		caps_offset;
+	unsigned	has_tt:1;
+	unsigned	has_synopsys_hc_bug:1;
+	unsigned	big_endian_desc:1;
+	unsigned	big_endian_mmio:1;
+	unsigned	port_power_on:1;
+	unsigned	port_power_off:1;
+};
+
+#endif /* __USB_CORE_EHCI_PDRIVER_H */
diff --git a/include/linux/usb/f_accessory.h b/include/linux/usb/f_accessory.h
new file mode 100644
index 00000000..61ebe0aa
--- /dev/null
+++ b/include/linux/usb/f_accessory.h
@@ -0,0 +1,146 @@
+/*
+ * Gadget Function Driver for Android USB accessories
+ *
+ * Copyright (C) 2011 Google, Inc.
+ * Author: Mike Lockwood <lockwood@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __LINUX_USB_F_ACCESSORY_H
+#define __LINUX_USB_F_ACCESSORY_H
+
+/* Use Google Vendor ID when in accessory mode */
+#define USB_ACCESSORY_VENDOR_ID 0x18D1
+
+
+/* Product ID to use when in accessory mode */
+#define USB_ACCESSORY_PRODUCT_ID 0x2D00
+
+/* Product ID to use when in accessory mode and adb is enabled */
+#define USB_ACCESSORY_ADB_PRODUCT_ID 0x2D01
+
+/* Indexes for strings sent by the host via ACCESSORY_SEND_STRING */
+#define ACCESSORY_STRING_MANUFACTURER   0
+#define ACCESSORY_STRING_MODEL          1
+#define ACCESSORY_STRING_DESCRIPTION    2
+#define ACCESSORY_STRING_VERSION        3
+#define ACCESSORY_STRING_URI            4
+#define ACCESSORY_STRING_SERIAL         5
+
+/* Control request for retrieving device's protocol version
+ *
+ *	requestType:    USB_DIR_IN | USB_TYPE_VENDOR
+ *	request:        ACCESSORY_GET_PROTOCOL
+ *	value:          0
+ *	index:          0
+ *	data            version number (16 bits little endian)
+ *                     1 for original accessory support
+ *                     2 adds HID and device to host audio support
+ */
+#define ACCESSORY_GET_PROTOCOL  51
+
+/* Control request for host to send a string to the device
+ *
+ *	requestType:    USB_DIR_OUT | USB_TYPE_VENDOR
+ *	request:        ACCESSORY_SEND_STRING
+ *	value:          0
+ *	index:          string ID
+ *	data            zero terminated UTF8 string
+ *
+ *  The device can later retrieve these strings via the
+ *  ACCESSORY_GET_STRING_* ioctls
+ */
+#define ACCESSORY_SEND_STRING   52
+
+/* Control request for starting device in accessory mode.
+ * The host sends this after setting all its strings to the device.
+ *
+ *	requestType:    USB_DIR_OUT | USB_TYPE_VENDOR
+ *	request:        ACCESSORY_START
+ *	value:          0
+ *	index:          0
+ *	data            none
+ */
+#define ACCESSORY_START         53
+
+/* Control request for registering a HID device.
+ * Upon registering, a unique ID is sent by the accessory in the
+ * value parameter. This ID will be used for future commands for
+ * the device
+ *
+ *	requestType:    USB_DIR_OUT | USB_TYPE_VENDOR
+ *	request:        ACCESSORY_REGISTER_HID_DEVICE
+ *	value:          Accessory assigned ID for the HID device
+ *	index:          total length of the HID report descriptor
+ *	data            none
+ */
+#define ACCESSORY_REGISTER_HID         54
+
+/* Control request for unregistering a HID device.
+ *
+ *	requestType:    USB_DIR_OUT | USB_TYPE_VENDOR
+ *	request:        ACCESSORY_REGISTER_HID
+ *	value:          Accessory assigned ID for the HID device
+ *	index:          0
+ *	data            none
+ */
+#define ACCESSORY_UNREGISTER_HID         55
+
+/* Control request for sending the HID report descriptor.
+ * If the HID descriptor is longer than the endpoint zero max packet size,
+ * the descriptor will be sent in multiple ACCESSORY_SET_HID_REPORT_DESC
+ * commands. The data for the descriptor must be sent sequentially
+ * if multiple packets are needed.
+ *
+ *	requestType:    USB_DIR_OUT | USB_TYPE_VENDOR
+ *	request:        ACCESSORY_SET_HID_REPORT_DESC
+ *	value:          Accessory assigned ID for the HID device
+ *	index:          offset of data in descriptor
+ *                      (needed when HID descriptor is too big for one packet)
+ *	data            the HID report descriptor
+ */
+#define ACCESSORY_SET_HID_REPORT_DESC         56
+
+/* Control request for sending HID events.
+ *
+ *	requestType:    USB_DIR_OUT | USB_TYPE_VENDOR
+ *	request:        ACCESSORY_SEND_HID_EVENT
+ *	value:          Accessory assigned ID for the HID device
+ *	index:          0
+ *	data            the HID report for the event
+ */
+#define ACCESSORY_SEND_HID_EVENT         57
+
+/* Control request for setting the audio mode.
+ *
+ *	requestType:	USB_DIR_OUT | USB_TYPE_VENDOR
+ *	request:        ACCESSORY_SET_AUDIO_MODE
+ *	value:          0 - no audio
+ *                     1 - device to host, 44100 16-bit stereo PCM
+ *	index:          0
+ *	data            none
+ */
+#define ACCESSORY_SET_AUDIO_MODE         58
+
+/* ioctls for retrieving strings set by the host */
+#define ACCESSORY_GET_STRING_MANUFACTURER   _IOW('M', 1, char[256])
+#define ACCESSORY_GET_STRING_MODEL          _IOW('M', 2, char[256])
+#define ACCESSORY_GET_STRING_DESCRIPTION    _IOW('M', 3, char[256])
+#define ACCESSORY_GET_STRING_VERSION        _IOW('M', 4, char[256])
+#define ACCESSORY_GET_STRING_URI            _IOW('M', 5, char[256])
+#define ACCESSORY_GET_STRING_SERIAL         _IOW('M', 6, char[256])
+/* returns 1 if there is a start request pending */
+#define ACCESSORY_IS_START_REQUESTED        _IO('M', 7)
+/* returns audio mode (set via the ACCESSORY_SET_AUDIO_MODE control request) */
+#define ACCESSORY_GET_AUDIO_MODE            _IO('M', 8)
+
+#endif /* __LINUX_USB_F_ACCESSORY_H */
diff --git a/include/linux/usb/f_mtp.h b/include/linux/usb/f_mtp.h
new file mode 100644
index 00000000..72a432e2
--- /dev/null
+++ b/include/linux/usb/f_mtp.h
@@ -0,0 +1,75 @@
+/*
+ * Gadget Function Driver for MTP
+ *
+ * Copyright (C) 2010 Google, Inc.
+ * Author: Mike Lockwood <lockwood@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __LINUX_USB_F_MTP_H
+#define __LINUX_USB_F_MTP_H
+
+#include <linux/ioctl.h>
+
+#ifdef __KERNEL__
+
+struct mtp_data_header {
+	/* length of packet, including this header */
+	uint32_t	length;
+	/* container type (2 for data packet) */
+	uint16_t	type;
+	/* MTP command code */
+	uint16_t    command;
+	/* MTP transaction ID */
+	uint32_t	transaction_id;
+};
+
+#endif /* __KERNEL__ */
+
+struct mtp_file_range {
+	/* file descriptor for file to transfer */
+	int			fd;
+	/* offset in file for start of transfer */
+	loff_t		offset;
+	/* number of bytes to transfer */
+	int64_t		length;
+	/* MTP command ID for data header,
+	 * used only for MTP_SEND_FILE_WITH_HEADER
+	 */
+	uint16_t	command;
+	/* MTP transaction ID for data header,
+	 * used only for MTP_SEND_FILE_WITH_HEADER
+	 */
+	uint32_t	transaction_id;
+};
+
+struct mtp_event {
+	/* size of the event */
+	size_t		length;
+	/* event data to send */
+	void		*data;
+};
+
+/* Sends the specified file range to the host */
+#define MTP_SEND_FILE              _IOW('M', 0, struct mtp_file_range)
+/* Receives data from the host and writes it to a file.
+ * The file is created if it does not exist.
+ */
+#define MTP_RECEIVE_FILE           _IOW('M', 1, struct mtp_file_range)
+/* Sends an event to the host via the interrupt endpoint */
+#define MTP_SEND_EVENT             _IOW('M', 3, struct mtp_event)
+/* Sends the specified file range to the host,
+ * with a 12 byte MTP data packet header at the beginning.
+ */
+#define MTP_SEND_FILE_WITH_HEADER  _IOW('M', 4, struct mtp_file_range)
+
+#endif /* __LINUX_USB_F_MTP_H */
diff --git a/include/linux/usb/functionfs.h b/include/linux/usb/functionfs.h
new file mode 100644
index 00000000..7587ef93
--- /dev/null
+++ b/include/linux/usb/functionfs.h
@@ -0,0 +1,199 @@
+#ifndef __LINUX_FUNCTIONFS_H__
+#define __LINUX_FUNCTIONFS_H__ 1
+
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+#include <linux/usb/ch9.h>
+
+
+enum {
+	FUNCTIONFS_DESCRIPTORS_MAGIC = 1,
+	FUNCTIONFS_STRINGS_MAGIC     = 2
+};
+
+
+#ifndef __KERNEL__
+
+/* Descriptor of an non-audio endpoint */
+struct usb_endpoint_descriptor_no_audio {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  bEndpointAddress;
+	__u8  bmAttributes;
+	__le16 wMaxPacketSize;
+	__u8  bInterval;
+} __attribute__((packed));
+
+
+/*
+ * All numbers must be in little endian order.
+ */
+
+struct usb_functionfs_descs_head {
+	__le32 magic;
+	__le32 length;
+	__le32 fs_count;
+	__le32 hs_count;
+} __attribute__((packed));
+
+/*
+ * Descriptors format:
+ *
+ * | off | name      | type         | description                          |
+ * |-----+-----------+--------------+--------------------------------------|
+ * |   0 | magic     | LE32         | FUNCTIONFS_{FS,HS}_DESCRIPTORS_MAGIC |
+ * |   4 | length    | LE32         | length of the whole data chunk       |
+ * |   8 | fs_count  | LE32         | number of full-speed descriptors     |
+ * |  12 | hs_count  | LE32         | number of high-speed descriptors     |
+ * |  16 | fs_descrs | Descriptor[] | list of full-speed descriptors       |
+ * |     | hs_descrs | Descriptor[] | list of high-speed descriptors       |
+ *
+ * descs are just valid USB descriptors and have the following format:
+ *
+ * | off | name            | type | description              |
+ * |-----+-----------------+------+--------------------------|
+ * |   0 | bLength         | U8   | length of the descriptor |
+ * |   1 | bDescriptorType | U8   | descriptor type          |
+ * |   2 | payload         |      | descriptor's payload     |
+ */
+
+struct usb_functionfs_strings_head {
+	__le32 magic;
+	__le32 length;
+	__le32 str_count;
+	__le32 lang_count;
+} __attribute__((packed));
+
+/*
+ * Strings format:
+ *
+ * | off | name       | type                  | description                |
+ * |-----+------------+-----------------------+----------------------------|
+ * |   0 | magic      | LE32                  | FUNCTIONFS_STRINGS_MAGIC   |
+ * |   4 | length     | LE32                  | length of the data chunk   |
+ * |   8 | str_count  | LE32                  | number of strings          |
+ * |  12 | lang_count | LE32                  | number of languages        |
+ * |  16 | stringtab  | StringTab[lang_count] | table of strings per lang  |
+ *
+ * For each language there is one stringtab entry (ie. there are lang_count
+ * stringtab entires).  Each StringTab has following format:
+ *
+ * | off | name    | type              | description                        |
+ * |-----+---------+-------------------+------------------------------------|
+ * |   0 | lang    | LE16              | language code                      |
+ * |   2 | strings | String[str_count] | array of strings in given language |
+ *
+ * For each string there is one strings entry (ie. there are str_count
+ * string entries).  Each String is a NUL terminated string encoded in
+ * UTF-8.
+ */
+
+#endif
+
+
+/*
+ * Events are delivered on the ep0 file descriptor, when the user mode driver
+ * reads from this file descriptor after writing the descriptors.  Don't
+ * stop polling this descriptor.
+ */
+
+enum usb_functionfs_event_type {
+	FUNCTIONFS_BIND,
+	FUNCTIONFS_UNBIND,
+
+	FUNCTIONFS_ENABLE,
+	FUNCTIONFS_DISABLE,
+
+	FUNCTIONFS_SETUP,
+
+	FUNCTIONFS_SUSPEND,
+	FUNCTIONFS_RESUME
+};
+
+/* NOTE:  this structure must stay the same size and layout on
+ * both 32-bit and 64-bit kernels.
+ */
+struct usb_functionfs_event {
+	union {
+		/* SETUP: packet; DATA phase i/o precedes next event
+		 *(setup.bmRequestType & USB_DIR_IN) flags direction */
+		struct usb_ctrlrequest	setup;
+	} __attribute__((packed)) u;
+
+	/* enum usb_functionfs_event_type */
+	__u8				type;
+	__u8				_pad[3];
+} __attribute__((packed));
+
+
+/* Endpoint ioctls */
+/* The same as in gadgetfs */
+
+/* IN transfers may be reported to the gadget driver as complete
+ *	when the fifo is loaded, before the host reads the data;
+ * OUT transfers may be reported to the host's "client" driver as
+ *	complete when they're sitting in the FIFO unread.
+ * THIS returns how many bytes are "unclaimed" in the endpoint fifo
+ * (needed for precise fault handling, when the hardware allows it)
+ */
+#define	FUNCTIONFS_FIFO_STATUS	_IO('g', 1)
+
+/* discards any unclaimed data in the fifo. */
+#define	FUNCTIONFS_FIFO_FLUSH	_IO('g', 2)
+
+/* resets endpoint halt+toggle; used to implement set_interface.
+ * some hardware (like pxa2xx) can't support this.
+ */
+#define	FUNCTIONFS_CLEAR_HALT	_IO('g', 3)
+
+/* Specific for functionfs */
+
+/*
+ * Returns reverse mapping of an interface.  Called on EP0.  If there
+ * is no such interface returns -EDOM.  If function is not active
+ * returns -ENODEV.
+ */
+#define	FUNCTIONFS_INTERFACE_REVMAP	_IO('g', 128)
+
+/*
+ * Returns real bEndpointAddress of an endpoint.  If function is not
+ * active returns -ENODEV.
+ */
+#define	FUNCTIONFS_ENDPOINT_REVMAP	_IO('g', 129)
+
+
+#ifdef __KERNEL__
+
+struct ffs_data;
+struct usb_composite_dev;
+struct usb_configuration;
+
+
+static int  functionfs_init(void) __attribute__((warn_unused_result));
+static void functionfs_cleanup(void);
+
+static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev)
+	__attribute__((warn_unused_result, nonnull));
+static void functionfs_unbind(struct ffs_data *ffs)
+	__attribute__((nonnull));
+
+static int functionfs_bind_config(struct usb_composite_dev *cdev,
+				  struct usb_configuration *c,
+				  struct ffs_data *ffs)
+	__attribute__((warn_unused_result, nonnull));
+
+
+static int functionfs_ready_callback(struct ffs_data *ffs)
+	__attribute__((warn_unused_result, nonnull));
+static void functionfs_closed_callback(struct ffs_data *ffs)
+	__attribute__((nonnull));
+static int functionfs_check_dev_callback(const char *dev_name)
+	__attribute__((warn_unused_result, nonnull));
+
+
+#endif
+
+#endif
diff --git a/include/linux/usb/g_hid.h b/include/linux/usb/g_hid.h
new file mode 100644
index 00000000..50f5745d
--- /dev/null
+++ b/include/linux/usb/g_hid.h
@@ -0,0 +1,32 @@
+/*
+ * g_hid.h -- Header file for USB HID gadget driver
+ *
+ * Copyright (C) 2010 Fabien Chouteau <fabien.chouteau@barco.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_USB_G_HID_H
+#define __LINUX_USB_G_HID_H
+
+struct hidg_func_descriptor {
+	unsigned char		subclass;
+	unsigned char		protocol;
+	unsigned short		report_length;
+	unsigned short		report_desc_length;
+	unsigned char		report_desc[];
+};
+
+#endif /* __LINUX_USB_G_HID_H */
diff --git a/include/linux/usb/g_printer.h b/include/linux/usb/g_printer.h
new file mode 100644
index 00000000..6178fde5
--- /dev/null
+++ b/include/linux/usb/g_printer.h
@@ -0,0 +1,35 @@
+/*
+ * g_printer.h -- Header file for USB Printer gadget driver
+ *
+ * Copyright (C) 2007 Craig W. Nadler
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_USB_G_PRINTER_H
+#define __LINUX_USB_G_PRINTER_H
+
+#define PRINTER_NOT_ERROR	0x08
+#define PRINTER_SELECTED	0x10
+#define PRINTER_PAPER_EMPTY	0x20
+
+/* The 'g' code is also used by gadgetfs ioctl requests.
+ * Don't add any colliding codes to either driver, and keep
+ * them in unique ranges (size 0x20 for now).
+ */
+#define GADGET_GET_PRINTER_STATUS	_IOR('g', 0x21, unsigned char)
+#define GADGET_SET_PRINTER_STATUS	_IOWR('g', 0x22, unsigned char)
+
+#endif /* __LINUX_USB_G_PRINTER_H */
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
new file mode 100644
index 00000000..9517466a
--- /dev/null
+++ b/include/linux/usb/gadget.h
@@ -0,0 +1,975 @@
+/*
+ * <linux/usb/gadget.h>
+ *
+ * We call the USB code inside a Linux-based peripheral device a "gadget"
+ * driver, except for the hardware-specific bus glue.  One USB host can
+ * master many USB gadgets, but the gadgets are only slaved to one host.
+ *
+ *
+ * (C) Copyright 2002-2004 by David Brownell
+ * All Rights Reserved.
+ *
+ * This software is licensed under the GNU GPL version 2.
+ */
+
+#ifndef __LINUX_USB_GADGET_H
+#define __LINUX_USB_GADGET_H
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/scatterlist.h>
+#include <linux/types.h>
+#include <linux/usb/ch9.h>
+
+struct usb_ep;
+
+/**
+ * struct usb_request - describes one i/o request
+ * @buf: Buffer used for data.  Always provide this; some controllers
+ *	only use PIO, or don't use DMA for some endpoints.
+ * @dma: DMA address corresponding to 'buf'.  If you don't set this
+ *	field, and the usb controller needs one, it is responsible
+ *	for mapping and unmapping the buffer.
+ * @sg: a scatterlist for SG-capable controllers.
+ * @num_sgs: number of SG entries
+ * @num_mapped_sgs: number of SG entries mapped to DMA (internal)
+ * @length: Length of that data
+ * @stream_id: The stream id, when USB3.0 bulk streams are being used
+ * @no_interrupt: If true, hints that no completion irq is needed.
+ *	Helpful sometimes with deep request queues that are handled
+ *	directly by DMA controllers.
+ * @zero: If true, when writing data, makes the last packet be "short"
+ *     by adding a zero length packet as needed;
+ * @short_not_ok: When reading data, makes short packets be
+ *     treated as errors (queue stops advancing till cleanup).
+ * @complete: Function called when request completes, so this request and
+ *	its buffer may be re-used.  The function will always be called with
+ *	interrupts disabled, and it must not sleep.
+ *	Reads terminate with a short packet, or when the buffer fills,
+ *	whichever comes first.  When writes terminate, some data bytes
+ *	will usually still be in flight (often in a hardware fifo).
+ *	Errors (for reads or writes) stop the queue from advancing
+ *	until the completion function returns, so that any transfers
+ *	invalidated by the error may first be dequeued.
+ * @context: For use by the completion callback
+ * @list: For use by the gadget driver.
+ * @status: Reports completion code, zero or a negative errno.
+ *	Normally, faults block the transfer queue from advancing until
+ *	the completion callback returns.
+ *	Code "-ESHUTDOWN" indicates completion caused by device disconnect,
+ *	or when the driver disabled the endpoint.
+ * @actual: Reports bytes transferred to/from the buffer.  For reads (OUT
+ *	transfers) this may be less than the requested length.  If the
+ *	short_not_ok flag is set, short reads are treated as errors
+ *	even when status otherwise indicates successful completion.
+ *	Note that for writes (IN transfers) some data bytes may still
+ *	reside in a device-side FIFO when the request is reported as
+ *	complete.
+ *
+ * These are allocated/freed through the endpoint they're used with.  The
+ * hardware's driver can add extra per-request data to the memory it returns,
+ * which often avoids separate memory allocations (potential failures),
+ * later when the request is queued.
+ *
+ * Request flags affect request handling, such as whether a zero length
+ * packet is written (the "zero" flag), whether a short read should be
+ * treated as an error (blocking request queue advance, the "short_not_ok"
+ * flag), or hinting that an interrupt is not required (the "no_interrupt"
+ * flag, for use with deep request queues).
+ *
+ * Bulk endpoints can use any size buffers, and can also be used for interrupt
+ * transfers. interrupt-only endpoints can be much less functional.
+ *
+ * NOTE:  this is analogous to 'struct urb' on the host side, except that
+ * it's thinner and promotes more pre-allocation.
+ */
+
+struct usb_request {
+	void			*buf;
+	unsigned		length;
+	dma_addr_t		dma;
+
+	struct scatterlist	*sg;
+	unsigned		num_sgs;
+	unsigned		num_mapped_sgs;
+
+	unsigned		stream_id:16;
+	unsigned		no_interrupt:1;
+	unsigned		zero:1;
+	unsigned		short_not_ok:1;
+
+	void			(*complete)(struct usb_ep *ep,
+					struct usb_request *req);
+	void			*context;
+	struct list_head	list;
+
+	int			status;
+	unsigned		actual;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* endpoint-specific parts of the api to the usb controller hardware.
+ * unlike the urb model, (de)multiplexing layers are not required.
+ * (so this api could slash overhead if used on the host side...)
+ *
+ * note that device side usb controllers commonly differ in how many
+ * endpoints they support, as well as their capabilities.
+ */
+struct usb_ep_ops {
+	int (*enable) (struct usb_ep *ep,
+		const struct usb_endpoint_descriptor *desc);
+	int (*disable) (struct usb_ep *ep);
+
+	struct usb_request *(*alloc_request) (struct usb_ep *ep,
+		gfp_t gfp_flags);
+	void (*free_request) (struct usb_ep *ep, struct usb_request *req);
+
+	int (*queue) (struct usb_ep *ep, struct usb_request *req,
+		gfp_t gfp_flags);
+	int (*dequeue) (struct usb_ep *ep, struct usb_request *req);
+
+	int (*set_halt) (struct usb_ep *ep, int value);
+	int (*set_wedge) (struct usb_ep *ep);
+
+	int (*fifo_status) (struct usb_ep *ep);
+	void (*fifo_flush) (struct usb_ep *ep);
+};
+
+/**
+ * struct usb_ep - device side representation of USB endpoint
+ * @name:identifier for the endpoint, such as "ep-a" or "ep9in-bulk"
+ * @ops: Function pointers used to access hardware-specific operations.
+ * @ep_list:the gadget's ep_list holds all of its endpoints
+ * @maxpacket:The maximum packet size used on this endpoint.  The initial
+ *	value can sometimes be reduced (hardware allowing), according to
+ *      the endpoint descriptor used to configure the endpoint.
+ * @max_streams: The maximum number of streams supported
+ *	by this EP (0 - 16, actual number is 2^n)
+ * @mult: multiplier, 'mult' value for SS Isoc EPs
+ * @maxburst: the maximum number of bursts supported by this EP (for usb3)
+ * @driver_data:for use by the gadget driver.
+ * @address: used to identify the endpoint when finding descriptor that
+ *	matches connection speed
+ * @desc: endpoint descriptor.  This pointer is set before the endpoint is
+ *	enabled and remains valid until the endpoint is disabled.
+ * @comp_desc: In case of SuperSpeed support, this is the endpoint companion
+ *	descriptor that is used to configure the endpoint
+ *
+ * the bus controller driver lists all the general purpose endpoints in
+ * gadget->ep_list.  the control endpoint (gadget->ep0) is not in that list,
+ * and is accessed only in response to a driver setup() callback.
+ */
+struct usb_ep {
+	void			*driver_data;
+
+	const char		*name;
+	const struct usb_ep_ops	*ops;
+	struct list_head	ep_list;
+	unsigned		maxpacket:16;
+	unsigned		max_streams:16;
+	unsigned		mult:2;
+	unsigned		maxburst:5;
+	u8			address;
+	const struct usb_endpoint_descriptor	*desc;
+	const struct usb_ss_ep_comp_descriptor	*comp_desc;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * usb_ep_enable - configure endpoint, making it usable
+ * @ep:the endpoint being configured.  may not be the endpoint named "ep0".
+ *	drivers discover endpoints through the ep_list of a usb_gadget.
+ *
+ * When configurations are set, or when interface settings change, the driver
+ * will enable or disable the relevant endpoints.  while it is enabled, an
+ * endpoint may be used for i/o until the driver receives a disconnect() from
+ * the host or until the endpoint is disabled.
+ *
+ * the ep0 implementation (which calls this routine) must ensure that the
+ * hardware capabilities of each endpoint match the descriptor provided
+ * for it.  for example, an endpoint named "ep2in-bulk" would be usable
+ * for interrupt transfers as well as bulk, but it likely couldn't be used
+ * for iso transfers or for endpoint 14.  some endpoints are fully
+ * configurable, with more generic names like "ep-a".  (remember that for
+ * USB, "in" means "towards the USB master".)
+ *
+ * returns zero, or a negative error code.
+ */
+static inline int usb_ep_enable(struct usb_ep *ep)
+{
+	return ep->ops->enable(ep, ep->desc);
+}
+
+/**
+ * usb_ep_disable - endpoint is no longer usable
+ * @ep:the endpoint being unconfigured.  may not be the endpoint named "ep0".
+ *
+ * no other task may be using this endpoint when this is called.
+ * any pending and uncompleted requests will complete with status
+ * indicating disconnect (-ESHUTDOWN) before this call returns.
+ * gadget drivers must call usb_ep_enable() again before queueing
+ * requests to the endpoint.
+ *
+ * returns zero, or a negative error code.
+ */
+static inline int usb_ep_disable(struct usb_ep *ep)
+{
+	return ep->ops->disable(ep);
+}
+
+/**
+ * usb_ep_alloc_request - allocate a request object to use with this endpoint
+ * @ep:the endpoint to be used with with the request
+ * @gfp_flags:GFP_* flags to use
+ *
+ * Request objects must be allocated with this call, since they normally
+ * need controller-specific setup and may even need endpoint-specific
+ * resources such as allocation of DMA descriptors.
+ * Requests may be submitted with usb_ep_queue(), and receive a single
+ * completion callback.  Free requests with usb_ep_free_request(), when
+ * they are no longer needed.
+ *
+ * Returns the request, or null if one could not be allocated.
+ */
+static inline struct usb_request *usb_ep_alloc_request(struct usb_ep *ep,
+						       gfp_t gfp_flags)
+{
+	return ep->ops->alloc_request(ep, gfp_flags);
+}
+
+/**
+ * usb_ep_free_request - frees a request object
+ * @ep:the endpoint associated with the request
+ * @req:the request being freed
+ *
+ * Reverses the effect of usb_ep_alloc_request().
+ * Caller guarantees the request is not queued, and that it will
+ * no longer be requeued (or otherwise used).
+ */
+static inline void usb_ep_free_request(struct usb_ep *ep,
+				       struct usb_request *req)
+{
+	ep->ops->free_request(ep, req);
+}
+
+/**
+ * usb_ep_queue - queues (submits) an I/O request to an endpoint.
+ * @ep:the endpoint associated with the request
+ * @req:the request being submitted
+ * @gfp_flags: GFP_* flags to use in case the lower level driver couldn't
+ *	pre-allocate all necessary memory with the request.
+ *
+ * This tells the device controller to perform the specified request through
+ * that endpoint (reading or writing a buffer).  When the request completes,
+ * including being canceled by usb_ep_dequeue(), the request's completion
+ * routine is called to return the request to the driver.  Any endpoint
+ * (except control endpoints like ep0) may have more than one transfer
+ * request queued; they complete in FIFO order.  Once a gadget driver
+ * submits a request, that request may not be examined or modified until it
+ * is given back to that driver through the completion callback.
+ *
+ * Each request is turned into one or more packets.  The controller driver
+ * never merges adjacent requests into the same packet.  OUT transfers
+ * will sometimes use data that's already buffered in the hardware.
+ * Drivers can rely on the fact that the first byte of the request's buffer
+ * always corresponds to the first byte of some USB packet, for both
+ * IN and OUT transfers.
+ *
+ * Bulk endpoints can queue any amount of data; the transfer is packetized
+ * automatically.  The last packet will be short if the request doesn't fill it
+ * out completely.  Zero length packets (ZLPs) should be avoided in portable
+ * protocols since not all usb hardware can successfully handle zero length
+ * packets.  (ZLPs may be explicitly written, and may be implicitly written if
+ * the request 'zero' flag is set.)  Bulk endpoints may also be used
+ * for interrupt transfers; but the reverse is not true, and some endpoints
+ * won't support every interrupt transfer.  (Such as 768 byte packets.)
+ *
+ * Interrupt-only endpoints are less functional than bulk endpoints, for
+ * example by not supporting queueing or not handling buffers that are
+ * larger than the endpoint's maxpacket size.  They may also treat data
+ * toggle differently.
+ *
+ * Control endpoints ... after getting a setup() callback, the driver queues
+ * one response (even if it would be zero length).  That enables the
+ * status ack, after transferring data as specified in the response.  Setup
+ * functions may return negative error codes to generate protocol stalls.
+ * (Note that some USB device controllers disallow protocol stall responses
+ * in some cases.)  When control responses are deferred (the response is
+ * written after the setup callback returns), then usb_ep_set_halt() may be
+ * used on ep0 to trigger protocol stalls.  Depending on the controller,
+ * it may not be possible to trigger a status-stage protocol stall when the
+ * data stage is over, that is, from within the response's completion
+ * routine.
+ *
+ * For periodic endpoints, like interrupt or isochronous ones, the usb host
+ * arranges to poll once per interval, and the gadget driver usually will
+ * have queued some data to transfer at that time.
+ *
+ * Returns zero, or a negative error code.  Endpoints that are not enabled
+ * report errors; errors will also be
+ * reported when the usb peripheral is disconnected.
+ */
+static inline int usb_ep_queue(struct usb_ep *ep,
+			       struct usb_request *req, gfp_t gfp_flags)
+{
+	return ep->ops->queue(ep, req, gfp_flags);
+}
+
+/**
+ * usb_ep_dequeue - dequeues (cancels, unlinks) an I/O request from an endpoint
+ * @ep:the endpoint associated with the request
+ * @req:the request being canceled
+ *
+ * if the request is still active on the endpoint, it is dequeued and its
+ * completion routine is called (with status -ECONNRESET); else a negative
+ * error code is returned.
+ *
+ * note that some hardware can't clear out write fifos (to unlink the request
+ * at the head of the queue) except as part of disconnecting from usb.  such
+ * restrictions prevent drivers from supporting configuration changes,
+ * even to configuration zero (a "chapter 9" requirement).
+ */
+static inline int usb_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
+{
+	return ep->ops->dequeue(ep, req);
+}
+
+/**
+ * usb_ep_set_halt - sets the endpoint halt feature.
+ * @ep: the non-isochronous endpoint being stalled
+ *
+ * Use this to stall an endpoint, perhaps as an error report.
+ * Except for control endpoints,
+ * the endpoint stays halted (will not stream any data) until the host
+ * clears this feature; drivers may need to empty the endpoint's request
+ * queue first, to make sure no inappropriate transfers happen.
+ *
+ * Note that while an endpoint CLEAR_FEATURE will be invisible to the
+ * gadget driver, a SET_INTERFACE will not be.  To reset endpoints for the
+ * current altsetting, see usb_ep_clear_halt().  When switching altsettings,
+ * it's simplest to use usb_ep_enable() or usb_ep_disable() for the endpoints.
+ *
+ * Returns zero, or a negative error code.  On success, this call sets
+ * underlying hardware state that blocks data transfers.
+ * Attempts to halt IN endpoints will fail (returning -EAGAIN) if any
+ * transfer requests are still queued, or if the controller hardware
+ * (usually a FIFO) still holds bytes that the host hasn't collected.
+ */
+static inline int usb_ep_set_halt(struct usb_ep *ep)
+{
+	return ep->ops->set_halt(ep, 1);
+}
+
+/**
+ * usb_ep_clear_halt - clears endpoint halt, and resets toggle
+ * @ep:the bulk or interrupt endpoint being reset
+ *
+ * Use this when responding to the standard usb "set interface" request,
+ * for endpoints that aren't reconfigured, after clearing any other state
+ * in the endpoint's i/o queue.
+ *
+ * Returns zero, or a negative error code.  On success, this call clears
+ * the underlying hardware state reflecting endpoint halt and data toggle.
+ * Note that some hardware can't support this request (like pxa2xx_udc),
+ * and accordingly can't correctly implement interface altsettings.
+ */
+static inline int usb_ep_clear_halt(struct usb_ep *ep)
+{
+	return ep->ops->set_halt(ep, 0);
+}
+
+/**
+ * usb_ep_set_wedge - sets the halt feature and ignores clear requests
+ * @ep: the endpoint being wedged
+ *
+ * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT)
+ * requests. If the gadget driver clears the halt status, it will
+ * automatically unwedge the endpoint.
+ *
+ * Returns zero on success, else negative errno.
+ */
+static inline int
+usb_ep_set_wedge(struct usb_ep *ep)
+{
+	if (ep->ops->set_wedge)
+		return ep->ops->set_wedge(ep);
+	else
+		return ep->ops->set_halt(ep, 1);
+}
+
+/**
+ * usb_ep_fifo_status - returns number of bytes in fifo, or error
+ * @ep: the endpoint whose fifo status is being checked.
+ *
+ * FIFO endpoints may have "unclaimed data" in them in certain cases,
+ * such as after aborted transfers.  Hosts may not have collected all
+ * the IN data written by the gadget driver (and reported by a request
+ * completion).  The gadget driver may not have collected all the data
+ * written OUT to it by the host.  Drivers that need precise handling for
+ * fault reporting or recovery may need to use this call.
+ *
+ * This returns the number of such bytes in the fifo, or a negative
+ * errno if the endpoint doesn't use a FIFO or doesn't support such
+ * precise handling.
+ */
+static inline int usb_ep_fifo_status(struct usb_ep *ep)
+{
+	if (ep->ops->fifo_status)
+		return ep->ops->fifo_status(ep);
+	else
+		return -EOPNOTSUPP;
+}
+
+/**
+ * usb_ep_fifo_flush - flushes contents of a fifo
+ * @ep: the endpoint whose fifo is being flushed.
+ *
+ * This call may be used to flush the "unclaimed data" that may exist in
+ * an endpoint fifo after abnormal transaction terminations.  The call
+ * must never be used except when endpoint is not being used for any
+ * protocol translation.
+ */
+static inline void usb_ep_fifo_flush(struct usb_ep *ep)
+{
+	if (ep->ops->fifo_flush)
+		ep->ops->fifo_flush(ep);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+struct usb_dcd_config_params {
+	__u8  bU1devExitLat;	/* U1 Device exit Latency */
+#define USB_DEFAULT_U1_DEV_EXIT_LAT	0x01	/* Less then 1 microsec */
+	__le16 bU2DevExitLat;	/* U2 Device exit Latency */
+#define USB_DEFAULT_U2_DEV_EXIT_LAT	0x1F4	/* Less then 500 microsec */
+};
+
+
+struct usb_gadget;
+struct usb_gadget_driver;
+
+/* the rest of the api to the controller hardware: device operations,
+ * which don't involve endpoints (or i/o).
+ */
+struct usb_gadget_ops {
+	int	(*get_frame)(struct usb_gadget *);
+	int	(*wakeup)(struct usb_gadget *);
+	int	(*set_selfpowered) (struct usb_gadget *, int is_selfpowered);
+	int	(*vbus_session) (struct usb_gadget *, int is_active);
+	int	(*vbus_draw) (struct usb_gadget *, unsigned mA);
+	int	(*pullup) (struct usb_gadget *, int is_on);
+	int	(*ioctl)(struct usb_gadget *,
+				unsigned code, unsigned long param);
+	void	(*get_config_params)(struct usb_dcd_config_params *);
+	int	(*udc_start)(struct usb_gadget *,
+			struct usb_gadget_driver *);
+	int	(*udc_stop)(struct usb_gadget *,
+			struct usb_gadget_driver *);
+
+	/* Those two are deprecated */
+	int	(*start)(struct usb_gadget_driver *,
+			int (*bind)(struct usb_gadget *));
+	int	(*stop)(struct usb_gadget_driver *);
+};
+
+/**
+ * struct usb_gadget - represents a usb slave device
+ * @ops: Function pointers used to access hardware-specific operations.
+ * @ep0: Endpoint zero, used when reading or writing responses to
+ *	driver setup() requests
+ * @ep_list: List of other endpoints supported by the device.
+ * @speed: Speed of current connection to USB host.
+ * @max_speed: Maximal speed the UDC can handle.  UDC must support this
+ *      and all slower speeds.
+ * @sg_supported: true if we can handle scatter-gather
+ * @is_otg: True if the USB device port uses a Mini-AB jack, so that the
+ *	gadget driver must provide a USB OTG descriptor.
+ * @is_a_peripheral: False unless is_otg, the "A" end of a USB cable
+ *	is in the Mini-AB jack, and HNP has been used to switch roles
+ *	so that the "A" device currently acts as A-Peripheral, not A-Host.
+ * @a_hnp_support: OTG device feature flag, indicating that the A-Host
+ *	supports HNP at this port.
+ * @a_alt_hnp_support: OTG device feature flag, indicating that the A-Host
+ *	only supports HNP on a different root port.
+ * @b_hnp_enable: OTG device feature flag, indicating that the A-Host
+ *	enabled HNP support.
+ * @name: Identifies the controller hardware type.  Used in diagnostics
+ *	and sometimes configuration.
+ * @dev: Driver model state for this abstract device.
+ *
+ * Gadgets have a mostly-portable "gadget driver" implementing device
+ * functions, handling all usb configurations and interfaces.  Gadget
+ * drivers talk to hardware-specific code indirectly, through ops vectors.
+ * That insulates the gadget driver from hardware details, and packages
+ * the hardware endpoints through generic i/o queues.  The "usb_gadget"
+ * and "usb_ep" interfaces provide that insulation from the hardware.
+ *
+ * Except for the driver data, all fields in this structure are
+ * read-only to the gadget driver.  That driver data is part of the
+ * "driver model" infrastructure in 2.6 (and later) kernels, and for
+ * earlier systems is grouped in a similar structure that's not known
+ * to the rest of the kernel.
+ *
+ * Values of the three OTG device feature flags are updated before the
+ * setup() call corresponding to USB_REQ_SET_CONFIGURATION, and before
+ * driver suspend() calls.  They are valid only when is_otg, and when the
+ * device is acting as a B-Peripheral (so is_a_peripheral is false).
+ */
+struct usb_gadget {
+	/* readonly to gadget driver */
+	const struct usb_gadget_ops	*ops;
+	struct usb_ep			*ep0;
+	struct list_head		ep_list;	/* of usb_ep */
+	enum usb_device_speed		speed;
+	enum usb_device_speed		max_speed;
+	unsigned			sg_supported:1;
+	unsigned			is_otg:1;
+	unsigned			is_a_peripheral:1;
+	unsigned			b_hnp_enable:1;
+	unsigned			a_hnp_support:1;
+	unsigned			a_alt_hnp_support:1;
+	const char			*name;
+	struct device			dev;
+};
+
+static inline void set_gadget_data(struct usb_gadget *gadget, void *data)
+	{ dev_set_drvdata(&gadget->dev, data); }
+static inline void *get_gadget_data(struct usb_gadget *gadget)
+	{ return dev_get_drvdata(&gadget->dev); }
+static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev)
+{
+	return container_of(dev, struct usb_gadget, dev);
+}
+
+/* iterates the non-control endpoints; 'tmp' is a struct usb_ep pointer */
+#define gadget_for_each_ep(tmp, gadget) \
+	list_for_each_entry(tmp, &(gadget)->ep_list, ep_list)
+
+
+/**
+ * gadget_is_dualspeed - return true iff the hardware handles high speed
+ * @g: controller that might support both high and full speeds
+ */
+static inline int gadget_is_dualspeed(struct usb_gadget *g)
+{
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+	/* runtime test would check "g->max_speed" ... that might be
+	 * useful to work around hardware bugs, but is mostly pointless
+	 */
+	return 1;
+#else
+	return 0;
+#endif
+}
+
+/**
+ * gadget_is_superspeed() - return true if the hardware handles
+ * supperspeed
+ * @g: controller that might support supper speed
+ */
+static inline int gadget_is_superspeed(struct usb_gadget *g)
+{
+#ifdef CONFIG_USB_GADGET_SUPERSPEED
+	/*
+	 * runtime test would check "g->max_speed" ... that might be
+	 * useful to work around hardware bugs, but is mostly pointless
+	 */
+	return 1;
+#else
+	return 0;
+#endif
+}
+
+/**
+ * gadget_is_otg - return true iff the hardware is OTG-ready
+ * @g: controller that might have a Mini-AB connector
+ *
+ * This is a runtime test, since kernels with a USB-OTG stack sometimes
+ * run on boards which only have a Mini-B (or Mini-A) connector.
+ */
+static inline int gadget_is_otg(struct usb_gadget *g)
+{
+#ifdef CONFIG_USB_OTG
+	return g->is_otg;
+#else
+	return 0;
+#endif
+}
+
+/**
+ * usb_gadget_frame_number - returns the current frame number
+ * @gadget: controller that reports the frame number
+ *
+ * Returns the usb frame number, normally eleven bits from a SOF packet,
+ * or negative errno if this device doesn't support this capability.
+ */
+static inline int usb_gadget_frame_number(struct usb_gadget *gadget)
+{
+	return gadget->ops->get_frame(gadget);
+}
+
+/**
+ * usb_gadget_wakeup - tries to wake up the host connected to this gadget
+ * @gadget: controller used to wake up the host
+ *
+ * Returns zero on success, else negative error code if the hardware
+ * doesn't support such attempts, or its support has not been enabled
+ * by the usb host.  Drivers must return device descriptors that report
+ * their ability to support this, or hosts won't enable it.
+ *
+ * This may also try to use SRP to wake the host and start enumeration,
+ * even if OTG isn't otherwise in use.  OTG devices may also start
+ * remote wakeup even when hosts don't explicitly enable it.
+ */
+static inline int usb_gadget_wakeup(struct usb_gadget *gadget)
+{
+	if (!gadget->ops->wakeup)
+		return -EOPNOTSUPP;
+	return gadget->ops->wakeup(gadget);
+}
+
+/**
+ * usb_gadget_set_selfpowered - sets the device selfpowered feature.
+ * @gadget:the device being declared as self-powered
+ *
+ * this affects the device status reported by the hardware driver
+ * to reflect that it now has a local power supply.
+ *
+ * returns zero on success, else negative errno.
+ */
+static inline int usb_gadget_set_selfpowered(struct usb_gadget *gadget)
+{
+	if (!gadget->ops->set_selfpowered)
+		return -EOPNOTSUPP;
+	return gadget->ops->set_selfpowered(gadget, 1);
+}
+
+/**
+ * usb_gadget_clear_selfpowered - clear the device selfpowered feature.
+ * @gadget:the device being declared as bus-powered
+ *
+ * this affects the device status reported by the hardware driver.
+ * some hardware may not support bus-powered operation, in which
+ * case this feature's value can never change.
+ *
+ * returns zero on success, else negative errno.
+ */
+static inline int usb_gadget_clear_selfpowered(struct usb_gadget *gadget)
+{
+	if (!gadget->ops->set_selfpowered)
+		return -EOPNOTSUPP;
+	return gadget->ops->set_selfpowered(gadget, 0);
+}
+
+/**
+ * usb_gadget_vbus_connect - Notify controller that VBUS is powered
+ * @gadget:The device which now has VBUS power.
+ * Context: can sleep
+ *
+ * This call is used by a driver for an external transceiver (or GPIO)
+ * that detects a VBUS power session starting.  Common responses include
+ * resuming the controller, activating the D+ (or D-) pullup to let the
+ * host detect that a USB device is attached, and starting to draw power
+ * (8mA or possibly more, especially after SET_CONFIGURATION).
+ *
+ * Returns zero on success, else negative errno.
+ */
+static inline int usb_gadget_vbus_connect(struct usb_gadget *gadget)
+{
+	if (!gadget->ops->vbus_session)
+		return -EOPNOTSUPP;
+	return gadget->ops->vbus_session(gadget, 1);
+}
+
+/**
+ * usb_gadget_vbus_draw - constrain controller's VBUS power usage
+ * @gadget:The device whose VBUS usage is being described
+ * @mA:How much current to draw, in milliAmperes.  This should be twice
+ *	the value listed in the configuration descriptor bMaxPower field.
+ *
+ * This call is used by gadget drivers during SET_CONFIGURATION calls,
+ * reporting how much power the device may consume.  For example, this
+ * could affect how quickly batteries are recharged.
+ *
+ * Returns zero on success, else negative errno.
+ */
+static inline int usb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+	if (!gadget->ops->vbus_draw)
+		return -EOPNOTSUPP;
+	return gadget->ops->vbus_draw(gadget, mA);
+}
+
+/**
+ * usb_gadget_vbus_disconnect - notify controller about VBUS session end
+ * @gadget:the device whose VBUS supply is being described
+ * Context: can sleep
+ *
+ * This call is used by a driver for an external transceiver (or GPIO)
+ * that detects a VBUS power session ending.  Common responses include
+ * reversing everything done in usb_gadget_vbus_connect().
+ *
+ * Returns zero on success, else negative errno.
+ */
+static inline int usb_gadget_vbus_disconnect(struct usb_gadget *gadget)
+{
+	if (!gadget->ops->vbus_session)
+		return -EOPNOTSUPP;
+	return gadget->ops->vbus_session(gadget, 0);
+}
+
+/**
+ * usb_gadget_connect - software-controlled connect to USB host
+ * @gadget:the peripheral being connected
+ *
+ * Enables the D+ (or potentially D-) pullup.  The host will start
+ * enumerating this gadget when the pullup is active and a VBUS session
+ * is active (the link is powered).  This pullup is always enabled unless
+ * usb_gadget_disconnect() has been used to disable it.
+ *
+ * Returns zero on success, else negative errno.
+ */
+static inline int usb_gadget_connect(struct usb_gadget *gadget)
+{
+	if (!gadget->ops->pullup)
+		return -EOPNOTSUPP;
+	return gadget->ops->pullup(gadget, 1);
+}
+
+/**
+ * usb_gadget_disconnect - software-controlled disconnect from USB host
+ * @gadget:the peripheral being disconnected
+ *
+ * Disables the D+ (or potentially D-) pullup, which the host may see
+ * as a disconnect (when a VBUS session is active).  Not all systems
+ * support software pullup controls.
+ *
+ * This routine may be used during the gadget driver bind() call to prevent
+ * the peripheral from ever being visible to the USB host, unless later
+ * usb_gadget_connect() is called.  For example, user mode components may
+ * need to be activated before the system can talk to hosts.
+ *
+ * Returns zero on success, else negative errno.
+ */
+static inline int usb_gadget_disconnect(struct usb_gadget *gadget)
+{
+	if (!gadget->ops->pullup)
+		return -EOPNOTSUPP;
+	return gadget->ops->pullup(gadget, 0);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * struct usb_gadget_driver - driver for usb 'slave' devices
+ * @function: String describing the gadget's function
+ * @max_speed: Highest speed the driver handles.
+ * @setup: Invoked for ep0 control requests that aren't handled by
+ *	the hardware level driver. Most calls must be handled by
+ *	the gadget driver, including descriptor and configuration
+ *	management.  The 16 bit members of the setup data are in
+ *	USB byte order. Called in_interrupt; this may not sleep.  Driver
+ *	queues a response to ep0, or returns negative to stall.
+ * @disconnect: Invoked after all transfers have been stopped,
+ *	when the host is disconnected.  May be called in_interrupt; this
+ *	may not sleep.  Some devices can't detect disconnect, so this might
+ *	not be called except as part of controller shutdown.
+ * @unbind: Invoked when the driver is unbound from a gadget,
+ *	usually from rmmod (after a disconnect is reported).
+ *	Called in a context that permits sleeping.
+ * @suspend: Invoked on USB suspend.  May be called in_interrupt.
+ * @resume: Invoked on USB resume.  May be called in_interrupt.
+ * @driver: Driver model state for this driver.
+ *
+ * Devices are disabled till a gadget driver successfully bind()s, which
+ * means the driver will handle setup() requests needed to enumerate (and
+ * meet "chapter 9" requirements) then do some useful work.
+ *
+ * If gadget->is_otg is true, the gadget driver must provide an OTG
+ * descriptor during enumeration, or else fail the bind() call.  In such
+ * cases, no USB traffic may flow until both bind() returns without
+ * having called usb_gadget_disconnect(), and the USB host stack has
+ * initialized.
+ *
+ * Drivers use hardware-specific knowledge to configure the usb hardware.
+ * endpoint addressing is only one of several hardware characteristics that
+ * are in descriptors the ep0 implementation returns from setup() calls.
+ *
+ * Except for ep0 implementation, most driver code shouldn't need change to
+ * run on top of different usb controllers.  It'll use endpoints set up by
+ * that ep0 implementation.
+ *
+ * The usb controller driver handles a few standard usb requests.  Those
+ * include set_address, and feature flags for devices, interfaces, and
+ * endpoints (the get_status, set_feature, and clear_feature requests).
+ *
+ * Accordingly, the driver's setup() callback must always implement all
+ * get_descriptor requests, returning at least a device descriptor and
+ * a configuration descriptor.  Drivers must make sure the endpoint
+ * descriptors match any hardware constraints. Some hardware also constrains
+ * other descriptors. (The pxa250 allows only configurations 1, 2, or 3).
+ *
+ * The driver's setup() callback must also implement set_configuration,
+ * and should also implement set_interface, get_configuration, and
+ * get_interface.  Setting a configuration (or interface) is where
+ * endpoints should be activated or (config 0) shut down.
+ *
+ * (Note that only the default control endpoint is supported.  Neither
+ * hosts nor devices generally support control traffic except to ep0.)
+ *
+ * Most devices will ignore USB suspend/resume operations, and so will
+ * not provide those callbacks.  However, some may need to change modes
+ * when the host is not longer directing those activities.  For example,
+ * local controls (buttons, dials, etc) may need to be re-enabled since
+ * the (remote) host can't do that any longer; or an error state might
+ * be cleared, to make the device behave identically whether or not
+ * power is maintained.
+ */
+struct usb_gadget_driver {
+	char			*function;
+	enum usb_device_speed	max_speed;
+	void			(*unbind)(struct usb_gadget *);
+	int			(*setup)(struct usb_gadget *,
+					const struct usb_ctrlrequest *);
+	void			(*disconnect)(struct usb_gadget *);
+	void			(*suspend)(struct usb_gadget *);
+	void			(*resume)(struct usb_gadget *);
+
+	/* FIXME support safe rmmod */
+	struct device_driver	driver;
+};
+
+
+
+/*-------------------------------------------------------------------------*/
+
+/* driver modules register and unregister, as usual.
+ * these calls must be made in a context that can sleep.
+ *
+ * these will usually be implemented directly by the hardware-dependent
+ * usb bus interface driver, which will only support a single driver.
+ */
+
+/**
+ * usb_gadget_probe_driver - probe a gadget driver
+ * @driver: the driver being registered
+ * @bind: the driver's bind callback
+ * Context: can sleep
+ *
+ * Call this in your gadget driver's module initialization function,
+ * to tell the underlying usb controller driver about your driver.
+ * The @bind() function will be called to bind it to a gadget before this
+ * registration call returns.  It's expected that the @bind() function will
+ * be in init sections.
+ */
+int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+		int (*bind)(struct usb_gadget *));
+
+/**
+ * usb_gadget_unregister_driver - unregister a gadget driver
+ * @driver:the driver being unregistered
+ * Context: can sleep
+ *
+ * Call this in your gadget driver's module cleanup function,
+ * to tell the underlying usb controller that your driver is
+ * going away.  If the controller is connected to a USB host,
+ * it will first disconnect().  The driver is also requested
+ * to unbind() and clean up any device state, before this procedure
+ * finally returns.  It's expected that the unbind() functions
+ * will in in exit sections, so may not be linked in some kernels.
+ */
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver);
+
+extern int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget);
+extern void usb_del_gadget_udc(struct usb_gadget *gadget);
+
+/*-------------------------------------------------------------------------*/
+
+/* utility to simplify dealing with string descriptors */
+
+/**
+ * struct usb_string - wraps a C string and its USB id
+ * @id:the (nonzero) ID for this string
+ * @s:the string, in UTF-8 encoding
+ *
+ * If you're using usb_gadget_get_string(), use this to wrap a string
+ * together with its ID.
+ */
+struct usb_string {
+	u8			id;
+	const char		*s;
+};
+
+/**
+ * struct usb_gadget_strings - a set of USB strings in a given language
+ * @language:identifies the strings' language (0x0409 for en-us)
+ * @strings:array of strings with their ids
+ *
+ * If you're using usb_gadget_get_string(), use this to wrap all the
+ * strings for a given language.
+ */
+struct usb_gadget_strings {
+	u16			language;	/* 0x0409 for en-us */
+	struct usb_string	*strings;
+};
+
+/* put descriptor for string with that id into buf (buflen >= 256) */
+int usb_gadget_get_string(struct usb_gadget_strings *table, int id, u8 *buf);
+
+/*-------------------------------------------------------------------------*/
+
+/* utility to simplify managing config descriptors */
+
+/* write vector of descriptors into buffer */
+int usb_descriptor_fillbuf(void *, unsigned,
+		const struct usb_descriptor_header **);
+
+/* build config descriptor from single descriptor vector */
+int usb_gadget_config_buf(const struct usb_config_descriptor *config,
+	void *buf, unsigned buflen, const struct usb_descriptor_header **desc);
+
+/* copy a NULL-terminated vector of descriptors */
+struct usb_descriptor_header **usb_copy_descriptors(
+		struct usb_descriptor_header **);
+
+/**
+ * usb_free_descriptors - free descriptors returned by usb_copy_descriptors()
+ * @v: vector of descriptors
+ */
+static inline void usb_free_descriptors(struct usb_descriptor_header **v)
+{
+	kfree(v);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* utility to simplify map/unmap of usb_requests to/from DMA */
+
+extern int usb_gadget_map_request(struct usb_gadget *gadget,
+		struct usb_request *req, int is_in);
+
+extern void usb_gadget_unmap_request(struct usb_gadget *gadget,
+		struct usb_request *req, int is_in);
+
+/*-------------------------------------------------------------------------*/
+
+/* utility wrapping a simple endpoint selection policy */
+
+extern struct usb_ep *usb_ep_autoconfig(struct usb_gadget *,
+			struct usb_endpoint_descriptor *);
+
+
+extern struct usb_ep *usb_ep_autoconfig_ss(struct usb_gadget *,
+			struct usb_endpoint_descriptor *,
+			struct usb_ss_ep_comp_descriptor *);
+
+extern void usb_ep_autoconfig_reset(struct usb_gadget *);
+
+#endif /* __LINUX_USB_GADGET_H */
diff --git a/include/linux/usb/gadgetfs.h b/include/linux/usb/gadgetfs.h
new file mode 100644
index 00000000..0bb12e0d
--- /dev/null
+++ b/include/linux/usb/gadgetfs.h
@@ -0,0 +1,88 @@
+/*
+ * Filesystem based user-mode API to USB Gadget controller hardware
+ *
+ * Other than ep0 operations, most things are done by read() and write()
+ * on endpoint files found in one directory.  They are configured by
+ * writing descriptors, and then may be used for normal stream style
+ * i/o requests.  When ep0 is configured, the device can enumerate;
+ * when it's closed, the device disconnects from usb.  Operations on
+ * ep0 require ioctl() operations.
+ *
+ * Configuration and device descriptors get written to /dev/gadget/$CHIP,
+ * which may then be used to read usb_gadgetfs_event structs.  The driver
+ * may activate endpoints as it handles SET_CONFIGURATION setup events,
+ * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT
+ * then performing data transfers by reading or writing.
+ */
+
+#ifndef __LINUX_USB_GADGETFS_H
+#define __LINUX_USB_GADGETFS_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+#include <linux/usb/ch9.h>
+
+/*
+ * Events are delivered on the ep0 file descriptor, when the user mode driver
+ * reads from this file descriptor after writing the descriptors.  Don't
+ * stop polling this descriptor.
+ */
+
+enum usb_gadgetfs_event_type {
+	GADGETFS_NOP = 0,
+
+	GADGETFS_CONNECT,
+	GADGETFS_DISCONNECT,
+	GADGETFS_SETUP,
+	GADGETFS_SUSPEND,
+	/* and likely more ! */
+};
+
+/* NOTE:  this structure must stay the same size and layout on
+ * both 32-bit and 64-bit kernels.
+ */
+struct usb_gadgetfs_event {
+	union {
+		/* NOP, DISCONNECT, SUSPEND: nothing
+		 * ... some hardware can't report disconnection
+		 */
+
+		/* CONNECT: just the speed */
+		enum usb_device_speed	speed;
+
+		/* SETUP: packet; DATA phase i/o precedes next event
+		 *(setup.bmRequestType & USB_DIR_IN) flags direction
+		 * ... includes SET_CONFIGURATION, SET_INTERFACE
+		 */
+		struct usb_ctrlrequest	setup;
+	} u;
+	enum usb_gadgetfs_event_type	type;
+};
+
+
+/* The 'g' code is also used by printer gadget ioctl requests.
+ * Don't add any colliding codes to either driver, and keep
+ * them in unique ranges (size 0x20 for now).
+ */
+
+/* endpoint ioctls */
+
+/* IN transfers may be reported to the gadget driver as complete
+ *	when the fifo is loaded, before the host reads the data;
+ * OUT transfers may be reported to the host's "client" driver as
+ *	complete when they're sitting in the FIFO unread.
+ * THIS returns how many bytes are "unclaimed" in the endpoint fifo
+ * (needed for precise fault handling, when the hardware allows it)
+ */
+#define	GADGETFS_FIFO_STATUS	_IO('g', 1)
+
+/* discards any unclaimed data in the fifo. */
+#define	GADGETFS_FIFO_FLUSH	_IO('g', 2)
+
+/* resets endpoint halt+toggle; used to implement set_interface.
+ * some hardware (like pxa2xx) can't support this.
+ */
+#define	GADGETFS_CLEAR_HALT	_IO('g', 3)
+
+#endif /* __LINUX_USB_GADGETFS_H */
diff --git a/include/linux/usb/gpio_vbus.h b/include/linux/usb/gpio_vbus.h
new file mode 100644
index 00000000..d9f03ccc
--- /dev/null
+++ b/include/linux/usb/gpio_vbus.h
@@ -0,0 +1,30 @@
+/*
+ * A simple GPIO VBUS sensing driver for B peripheral only devices
+ * with internal transceivers.
+ * Optionally D+ pullup can be controlled by a second GPIO.
+ *
+ * Copyright (c) 2008 Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/**
+ * struct gpio_vbus_mach_info - configuration for gpio_vbus
+ * @gpio_vbus: VBUS sensing GPIO
+ * @gpio_pullup: optional D+ or D- pullup GPIO (else negative/invalid)
+ * @gpio_vbus_inverted: true if gpio_vbus is active low
+ * @gpio_pullup_inverted: true if gpio_pullup is active low
+ *
+ * The VBUS sensing GPIO should have a pulldown, which will normally be
+ * part of a resistor ladder turning a 4.0V-5.25V level on VBUS into a
+ * value the GPIO detects as active.  Some systems will use comparators.
+ */
+struct gpio_vbus_mach_info {
+	int gpio_vbus;
+	int gpio_pullup;
+	bool gpio_vbus_inverted;
+	bool gpio_pullup_inverted;
+};
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
new file mode 100644
index 00000000..030f3610
--- /dev/null
+++ b/include/linux/usb/hcd.h
@@ -0,0 +1,696 @@
+/*
+ * Copyright (c) 2001-2002 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __USB_CORE_HCD_H
+#define __USB_CORE_HCD_H
+
+#ifdef __KERNEL__
+
+#include <linux/rwsem.h>
+
+#define MAX_TOPO_LEVEL		6
+
+/* This file contains declarations of usbcore internals that are mostly
+ * used or exposed by Host Controller Drivers.
+ */
+
+/*
+ * USB Packet IDs (PIDs)
+ */
+#define USB_PID_EXT			0xf0	/* USB 2.0 LPM ECN */
+#define USB_PID_OUT			0xe1
+#define USB_PID_ACK			0xd2
+#define USB_PID_DATA0			0xc3
+#define USB_PID_PING			0xb4	/* USB 2.0 */
+#define USB_PID_SOF			0xa5
+#define USB_PID_NYET			0x96	/* USB 2.0 */
+#define USB_PID_DATA2			0x87	/* USB 2.0 */
+#define USB_PID_SPLIT			0x78	/* USB 2.0 */
+#define USB_PID_IN			0x69
+#define USB_PID_NAK			0x5a
+#define USB_PID_DATA1			0x4b
+#define USB_PID_PREAMBLE		0x3c	/* Token mode */
+#define USB_PID_ERR			0x3c	/* USB 2.0: handshake mode */
+#define USB_PID_SETUP			0x2d
+#define USB_PID_STALL			0x1e
+#define USB_PID_MDATA			0x0f	/* USB 2.0 */
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * USB Host Controller Driver (usb_hcd) framework
+ *
+ * Since "struct usb_bus" is so thin, you can't share much code in it.
+ * This framework is a layer over that, and should be more sharable.
+ *
+ * @authorized_default: Specifies if new devices are authorized to
+ *                      connect by default or they require explicit
+ *                      user space authorization; this bit is settable
+ *                      through /sys/class/usb_host/X/authorized_default.
+ *                      For the rest is RO, so we don't lock to r/w it.
+ */
+
+/*-------------------------------------------------------------------------*/
+
+struct usb_hcd {
+
+	/*
+	 * housekeeping
+	 */
+	struct usb_bus		self;		/* hcd is-a bus */
+	struct kref		kref;		/* reference counter */
+
+	const char		*product_desc;	/* product/vendor string */
+	int			speed;		/* Speed for this roothub.
+						 * May be different from
+						 * hcd->driver->flags & HCD_MASK
+						 */
+	char			irq_descr[24];	/* driver + bus # */
+
+	struct timer_list	rh_timer;	/* drives root-hub polling */
+	struct urb		*status_urb;	/* the current status urb */
+#ifdef CONFIG_USB_SUSPEND
+	struct work_struct	wakeup_work;	/* for remote wakeup */
+#endif
+
+	/*
+	 * hardware info/state
+	 */
+	const struct hc_driver	*driver;	/* hw-specific hooks */
+
+	/* Flags that need to be manipulated atomically because they can
+	 * change while the host controller is running.  Always use
+	 * set_bit() or clear_bit() to change their values.
+	 */
+	unsigned long		flags;
+#define HCD_FLAG_HW_ACCESSIBLE		0	/* at full power */
+#define HCD_FLAG_POLL_RH		2	/* poll for rh status? */
+#define HCD_FLAG_POLL_PENDING		3	/* status has changed? */
+#define HCD_FLAG_WAKEUP_PENDING		4	/* root hub is resuming? */
+#define HCD_FLAG_RH_RUNNING		5	/* root hub is running? */
+#define HCD_FLAG_DEAD			6	/* controller has died? */
+
+	/* The flags can be tested using these macros; they are likely to
+	 * be slightly faster than test_bit().
+	 */
+#define HCD_HW_ACCESSIBLE(hcd)	((hcd)->flags & (1U << HCD_FLAG_HW_ACCESSIBLE))
+#define HCD_POLL_RH(hcd)	((hcd)->flags & (1U << HCD_FLAG_POLL_RH))
+#define HCD_POLL_PENDING(hcd)	((hcd)->flags & (1U << HCD_FLAG_POLL_PENDING))
+#define HCD_WAKEUP_PENDING(hcd)	((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING))
+#define HCD_RH_RUNNING(hcd)	((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING))
+#define HCD_DEAD(hcd)		((hcd)->flags & (1U << HCD_FLAG_DEAD))
+
+	/* Flags that get set only during HCD registration or removal. */
+	unsigned		rh_registered:1;/* is root hub registered? */
+	unsigned		rh_pollable:1;	/* may we poll the root hub? */
+	unsigned		msix_enabled:1;	/* driver has MSI-X enabled? */
+
+	/* The next flag is a stopgap, to be removed when all the HCDs
+	 * support the new root-hub polling mechanism. */
+	unsigned		uses_new_polling:1;
+	unsigned		wireless:1;	/* Wireless USB HCD */
+	unsigned		authorized_default:1;
+	unsigned		has_tt:1;	/* Integrated TT in root hub */
+
+	unsigned int		irq;		/* irq allocated */
+	void __iomem		*regs;		/* device memory/io */
+	u64			rsrc_start;	/* memory/io resource start */
+	u64			rsrc_len;	/* memory/io resource length */
+	unsigned		power_budget;	/* in mA, 0 = no limit */
+
+	/* bandwidth_mutex should be taken before adding or removing
+	 * any new bus bandwidth constraints:
+	 *   1. Before adding a configuration for a new device.
+	 *   2. Before removing the configuration to put the device into
+	 *      the addressed state.
+	 *   3. Before selecting a different configuration.
+	 *   4. Before selecting an alternate interface setting.
+	 *
+	 * bandwidth_mutex should be dropped after a successful control message
+	 * to the device, or resetting the bandwidth after a failed attempt.
+	 */
+	struct mutex		*bandwidth_mutex;
+	struct usb_hcd		*shared_hcd;
+	struct usb_hcd		*primary_hcd;
+
+
+#define HCD_BUFFER_POOLS	4
+	struct dma_pool		*pool[HCD_BUFFER_POOLS];
+
+	int			state;
+#	define	__ACTIVE		0x01
+#	define	__SUSPEND		0x04
+#	define	__TRANSIENT		0x80
+
+#	define	HC_STATE_HALT		0
+#	define	HC_STATE_RUNNING	(__ACTIVE)
+#	define	HC_STATE_QUIESCING	(__SUSPEND|__TRANSIENT|__ACTIVE)
+#	define	HC_STATE_RESUMING	(__SUSPEND|__TRANSIENT)
+#	define	HC_STATE_SUSPENDED	(__SUSPEND)
+
+#define	HC_IS_RUNNING(state) ((state) & __ACTIVE)
+#define	HC_IS_SUSPENDED(state) ((state) & __SUSPEND)
+
+	/* more shared queuing code would be good; it should support
+	 * smarter scheduling, handle transaction translators, etc;
+	 * input size of periodic table to an interrupt scheduler.
+	 * (ohci 32, uhci 1024, ehci 256/512/1024).
+	 */
+
+	/* The HC driver's private data is stored at the end of
+	 * this structure.
+	 */
+	unsigned long hcd_priv[0]
+			__attribute__ ((aligned(sizeof(s64))));
+};
+
+/* 2.4 does this a bit differently ... */
+static inline struct usb_bus *hcd_to_bus(struct usb_hcd *hcd)
+{
+	return &hcd->self;
+}
+
+static inline struct usb_hcd *bus_to_hcd(struct usb_bus *bus)
+{
+	return container_of(bus, struct usb_hcd, self);
+}
+
+struct hcd_timeout {	/* timeouts we allocate */
+	struct list_head	timeout_list;
+	struct timer_list	timer;
+};
+
+/*-------------------------------------------------------------------------*/
+
+
+struct hc_driver {
+	const char	*description;	/* "ehci-hcd" etc */
+	const char	*product_desc;	/* product/vendor string */
+	size_t		hcd_priv_size;	/* size of private data */
+
+	/* irq handler */
+	irqreturn_t	(*irq) (struct usb_hcd *hcd);
+
+	int	flags;
+#define	HCD_MEMORY	0x0001		/* HC regs use memory (else I/O) */
+#define	HCD_LOCAL_MEM	0x0002		/* HC needs local memory */
+#define	HCD_SHARED	0x0004		/* Two (or more) usb_hcds share HW */
+#define	HCD_USB11	0x0010		/* USB 1.1 */
+#define	HCD_USB2	0x0020		/* USB 2.0 */
+#define	HCD_USB3	0x0040		/* USB 3.0 */
+#define	HCD_MASK	0x0070
+
+	/* called to init HCD and root hub */
+	int	(*reset) (struct usb_hcd *hcd);
+	int	(*start) (struct usb_hcd *hcd);
+
+	/* NOTE:  these suspend/resume calls relate to the HC as
+	 * a whole, not just the root hub; they're for PCI bus glue.
+	 */
+	/* called after suspending the hub, before entering D3 etc */
+	int	(*pci_suspend)(struct usb_hcd *hcd, bool do_wakeup);
+
+	/* called after entering D0 (etc), before resuming the hub */
+	int	(*pci_resume)(struct usb_hcd *hcd, bool hibernated);
+
+	/* cleanly make HCD stop writing memory and doing I/O */
+	void	(*stop) (struct usb_hcd *hcd);
+
+	/* shutdown HCD */
+	void	(*shutdown) (struct usb_hcd *hcd);
+
+	/* return current frame number */
+	int	(*get_frame_number) (struct usb_hcd *hcd);
+
+	/* manage i/o requests, device state */
+	int	(*urb_enqueue)(struct usb_hcd *hcd,
+				struct urb *urb, gfp_t mem_flags);
+	int	(*urb_dequeue)(struct usb_hcd *hcd,
+				struct urb *urb, int status);
+
+	/*
+	 * (optional) these hooks allow an HCD to override the default DMA
+	 * mapping and unmapping routines.  In general, they shouldn't be
+	 * necessary unless the host controller has special DMA requirements,
+	 * such as alignment contraints.  If these are not specified, the
+	 * general usb_hcd_(un)?map_urb_for_dma functions will be used instead
+	 * (and it may be a good idea to call these functions in your HCD
+	 * implementation)
+	 */
+	int	(*map_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb,
+				   gfp_t mem_flags);
+	void    (*unmap_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb);
+
+	/* hw synch, freeing endpoint resources that urb_dequeue can't */
+	void	(*endpoint_disable)(struct usb_hcd *hcd,
+			struct usb_host_endpoint *ep);
+
+	/* (optional) reset any endpoint state such as sequence number
+	   and current window */
+	void	(*endpoint_reset)(struct usb_hcd *hcd,
+			struct usb_host_endpoint *ep);
+
+	/* root hub support */
+	int	(*hub_status_data) (struct usb_hcd *hcd, char *buf);
+	int	(*hub_control) (struct usb_hcd *hcd,
+				u16 typeReq, u16 wValue, u16 wIndex,
+				char *buf, u16 wLength);
+	int	(*bus_suspend)(struct usb_hcd *);
+	int	(*bus_resume)(struct usb_hcd *);
+	int	(*start_port_reset)(struct usb_hcd *, unsigned port_num);
+
+		/* force handover of high-speed port to full-speed companion */
+	void	(*relinquish_port)(struct usb_hcd *, int);
+		/* has a port been handed over to a companion? */
+	int	(*port_handed_over)(struct usb_hcd *, int);
+
+		/* CLEAR_TT_BUFFER completion callback */
+	void	(*clear_tt_buffer_complete)(struct usb_hcd *,
+				struct usb_host_endpoint *);
+
+	/* xHCI specific functions */
+		/* Called by usb_alloc_dev to alloc HC device structures */
+	int	(*alloc_dev)(struct usb_hcd *, struct usb_device *);
+		/* Called by usb_disconnect to free HC device structures */
+	void	(*free_dev)(struct usb_hcd *, struct usb_device *);
+	/* Change a group of bulk endpoints to support multiple stream IDs */
+	int	(*alloc_streams)(struct usb_hcd *hcd, struct usb_device *udev,
+		struct usb_host_endpoint **eps, unsigned int num_eps,
+		unsigned int num_streams, gfp_t mem_flags);
+	/* Reverts a group of bulk endpoints back to not using stream IDs.
+	 * Can fail if we run out of memory.
+	 */
+	int	(*free_streams)(struct usb_hcd *hcd, struct usb_device *udev,
+		struct usb_host_endpoint **eps, unsigned int num_eps,
+		gfp_t mem_flags);
+
+	/* Bandwidth computation functions */
+	/* Note that add_endpoint() can only be called once per endpoint before
+	 * check_bandwidth() or reset_bandwidth() must be called.
+	 * drop_endpoint() can only be called once per endpoint also.
+	 * A call to xhci_drop_endpoint() followed by a call to
+	 * xhci_add_endpoint() will add the endpoint to the schedule with
+	 * possibly new parameters denoted by a different endpoint descriptor
+	 * in usb_host_endpoint.  A call to xhci_add_endpoint() followed by a
+	 * call to xhci_drop_endpoint() is not allowed.
+	 */
+		/* Allocate endpoint resources and add them to a new schedule */
+	int	(*add_endpoint)(struct usb_hcd *, struct usb_device *,
+				struct usb_host_endpoint *);
+		/* Drop an endpoint from a new schedule */
+	int	(*drop_endpoint)(struct usb_hcd *, struct usb_device *,
+				 struct usb_host_endpoint *);
+		/* Check that a new hardware configuration, set using
+		 * endpoint_enable and endpoint_disable, does not exceed bus
+		 * bandwidth.  This must be called before any set configuration
+		 * or set interface requests are sent to the device.
+		 */
+	int	(*check_bandwidth)(struct usb_hcd *, struct usb_device *);
+		/* Reset the device schedule to the last known good schedule,
+		 * which was set from a previous successful call to
+		 * check_bandwidth().  This reverts any add_endpoint() and
+		 * drop_endpoint() calls since that last successful call.
+		 * Used for when a check_bandwidth() call fails due to resource
+		 * or bandwidth constraints.
+		 */
+	void	(*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
+		/* Returns the hardware-chosen device address */
+	int	(*address_device)(struct usb_hcd *, struct usb_device *udev);
+		/* Notifies the HCD after a hub descriptor is fetched.
+		 * Will block.
+		 */
+	int	(*update_hub_device)(struct usb_hcd *, struct usb_device *hdev,
+			struct usb_tt *tt, gfp_t mem_flags);
+	int	(*reset_device)(struct usb_hcd *, struct usb_device *);
+		/* Notifies the HCD after a device is connected and its
+		 * address is set
+		 */
+	int	(*update_device)(struct usb_hcd *, struct usb_device *);
+	int	(*set_usb2_hw_lpm)(struct usb_hcd *, struct usb_device *, int);
+};
+
+extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
+extern int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
+		int status);
+extern void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb);
+
+extern int usb_hcd_submit_urb(struct urb *urb, gfp_t mem_flags);
+extern int usb_hcd_unlink_urb(struct urb *urb, int status);
+extern void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb,
+		int status);
+extern int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
+		gfp_t mem_flags);
+extern void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *, struct urb *);
+extern void usb_hcd_unmap_urb_for_dma(struct usb_hcd *, struct urb *);
+extern void usb_hcd_flush_endpoint(struct usb_device *udev,
+		struct usb_host_endpoint *ep);
+extern void usb_hcd_disable_endpoint(struct usb_device *udev,
+		struct usb_host_endpoint *ep);
+extern void usb_hcd_reset_endpoint(struct usb_device *udev,
+		struct usb_host_endpoint *ep);
+extern void usb_hcd_synchronize_unlinks(struct usb_device *udev);
+extern int usb_hcd_alloc_bandwidth(struct usb_device *udev,
+		struct usb_host_config *new_config,
+		struct usb_host_interface *old_alt,
+		struct usb_host_interface *new_alt);
+extern int usb_hcd_get_frame_number(struct usb_device *udev);
+
+extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
+		struct device *dev, const char *bus_name);
+extern struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
+		struct device *dev, const char *bus_name,
+		struct usb_hcd *shared_hcd);
+extern struct usb_hcd *usb_get_hcd(struct usb_hcd *hcd);
+extern void usb_put_hcd(struct usb_hcd *hcd);
+extern int usb_hcd_is_primary_hcd(struct usb_hcd *hcd);
+extern int usb_add_hcd(struct usb_hcd *hcd,
+		unsigned int irqnum, unsigned long irqflags);
+extern void usb_remove_hcd(struct usb_hcd *hcd);
+
+struct platform_device;
+extern void usb_hcd_platform_shutdown(struct platform_device *dev);
+
+#ifdef CONFIG_PCI
+struct pci_dev;
+struct pci_device_id;
+extern int usb_hcd_pci_probe(struct pci_dev *dev,
+				const struct pci_device_id *id);
+extern void usb_hcd_pci_remove(struct pci_dev *dev);
+extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
+
+#ifdef CONFIG_PM_SLEEP
+extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
+#endif
+#endif /* CONFIG_PCI */
+
+/* pci-ish (pdev null is ok) buffer alloc/mapping support */
+int hcd_buffer_create(struct usb_hcd *hcd);
+void hcd_buffer_destroy(struct usb_hcd *hcd);
+
+void *hcd_buffer_alloc(struct usb_bus *bus, size_t size,
+	gfp_t mem_flags, dma_addr_t *dma);
+void hcd_buffer_free(struct usb_bus *bus, size_t size,
+	void *addr, dma_addr_t dma);
+
+/* generic bus glue, needed for host controllers that don't use PCI */
+extern irqreturn_t usb_hcd_irq(int irq, void *__hcd);
+
+extern void usb_hc_died(struct usb_hcd *hcd);
+extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd);
+extern void usb_wakeup_notification(struct usb_device *hdev,
+		unsigned int portnum);
+
+/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
+#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
+#define	usb_dotoggle(dev, ep, out)  ((dev)->toggle[out] ^= (1 << (ep)))
+#define usb_settoggle(dev, ep, out, bit) \
+		((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
+		 ((bit) << (ep)))
+
+/* -------------------------------------------------------------------------- */
+
+/* Enumeration is only for the hub driver, or HCD virtual root hubs */
+extern struct usb_device *usb_alloc_dev(struct usb_device *parent,
+					struct usb_bus *, unsigned port);
+extern int usb_new_device(struct usb_device *dev);
+extern void usb_disconnect(struct usb_device **);
+
+extern int usb_get_configuration(struct usb_device *dev);
+extern void usb_destroy_configuration(struct usb_device *dev);
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * HCD Root Hub support
+ */
+
+#include <linux/usb/ch11.h>
+
+/*
+ * As of USB 2.0, full/low speed devices are segregated into trees.
+ * One type grows from USB 1.1 host controllers (OHCI, UHCI etc).
+ * The other type grows from high speed hubs when they connect to
+ * full/low speed devices using "Transaction Translators" (TTs).
+ *
+ * TTs should only be known to the hub driver, and high speed bus
+ * drivers (only EHCI for now).  They affect periodic scheduling and
+ * sometimes control/bulk error recovery.
+ */
+
+struct usb_device;
+
+struct usb_tt {
+	struct usb_device	*hub;	/* upstream highspeed hub */
+	int			multi;	/* true means one TT per port */
+	unsigned		think_time;	/* think time in ns */
+
+	/* for control/bulk error recovery (CLEAR_TT_BUFFER) */
+	spinlock_t		lock;
+	struct list_head	clear_list;	/* of usb_tt_clear */
+	struct work_struct	clear_work;
+};
+
+struct usb_tt_clear {
+	struct list_head	clear_list;
+	unsigned		tt;
+	u16			devinfo;
+	struct usb_hcd		*hcd;
+	struct usb_host_endpoint	*ep;
+};
+
+extern int usb_hub_clear_tt_buffer(struct urb *urb);
+extern void usb_ep0_reinit(struct usb_device *);
+
+/*{CharlesTu, 2010.08.26, for test mode */
+#define USB_PORT_FEAT_INDICATOR         22
+
+/* 
+ * Hub Port Test Mode Selector Codes
+ * See USB 2.0 spec Table 11-24
+ */
+#define USB_PORT_TEST_J				0x01
+#define USB_PORT_TEST_K				0x02
+#define USB_PORT_TEST_SE0_NAK			0x03
+#define USB_PORT_TEST_PACKET			0x04
+#define USB_PORT_TEST_FORCE_ENABLE		0x05
+
+/*
+ * This is used for the Hi-Speed Host Electrical Tests
+ * on the root hub. See USB 2.0 spec 7.1.20 and the
+ * Embedded High-speed Host Electrical Test Procedure.
+ */
+#define USB_PORT_TEST_SINGLE_STEP_SET_FEATURE	0x00
+/*CharelsTu} */
+
+/* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */
+#define DeviceRequest \
+	((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
+#define DeviceOutRequest \
+	((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
+
+#define InterfaceRequest \
+	((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
+
+#define EndpointRequest \
+	((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
+#define EndpointOutRequest \
+	((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
+
+/* class requests from the USB 2.0 hub spec, table 11-15 */
+/* GetBusState and SetHubDescriptor are optional, omitted */
+#define ClearHubFeature		(0x2000 | USB_REQ_CLEAR_FEATURE)
+#define ClearPortFeature	(0x2300 | USB_REQ_CLEAR_FEATURE)
+#define GetHubDescriptor	(0xa000 | USB_REQ_GET_DESCRIPTOR)
+#define GetHubStatus		(0xa000 | USB_REQ_GET_STATUS)
+#define GetPortStatus		(0xa300 | USB_REQ_GET_STATUS)
+#define SetHubFeature		(0x2000 | USB_REQ_SET_FEATURE)
+#define SetPortFeature		(0x2300 | USB_REQ_SET_FEATURE)
+
+
+/*-------------------------------------------------------------------------*/
+
+/* class requests from USB 3.0 hub spec, table 10-5 */
+#define SetHubDepth		(0x3000 | HUB_SET_DEPTH)
+#define GetPortErrorCount	(0x8000 | HUB_GET_PORT_ERR_COUNT)
+
+/*
+ * Generic bandwidth allocation constants/support
+ */
+#define FRAME_TIME_USECS	1000L
+#define BitTime(bytecount) (7 * 8 * bytecount / 6) /* with integer truncation */
+		/* Trying not to use worst-case bit-stuffing
+		 * of (7/6 * 8 * bytecount) = 9.33 * bytecount */
+		/* bytecount = data payload byte count */
+
+#define NS_TO_US(ns)	((ns + 500L) / 1000L)
+			/* convert & round nanoseconds to microseconds */
+
+
+/*
+ * Full/low speed bandwidth allocation constants/support.
+ */
+#define BW_HOST_DELAY	1000L		/* nanoseconds */
+#define BW_HUB_LS_SETUP	333L		/* nanoseconds */
+			/* 4 full-speed bit times (est.) */
+
+#define FRAME_TIME_BITS			12000L	/* frame = 1 millisecond */
+#define FRAME_TIME_MAX_BITS_ALLOC	(90L * FRAME_TIME_BITS / 100L)
+#define FRAME_TIME_MAX_USECS_ALLOC	(90L * FRAME_TIME_USECS / 100L)
+
+/*
+ * Ceiling [nano/micro]seconds (typical) for that many bytes at high speed
+ * ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed
+ * to preallocate bandwidth)
+ */
+#define USB2_HOST_DELAY	5	/* nsec, guess */
+#define HS_NSECS(bytes) (((55 * 8 * 2083) \
+	+ (2083UL * (3 + BitTime(bytes))))/1000 \
+	+ USB2_HOST_DELAY)
+#define HS_NSECS_ISO(bytes) (((38 * 8 * 2083) \
+	+ (2083UL * (3 + BitTime(bytes))))/1000 \
+	+ USB2_HOST_DELAY)
+#define HS_USECS(bytes)		NS_TO_US(HS_NSECS(bytes))
+#define HS_USECS_ISO(bytes)	NS_TO_US(HS_NSECS_ISO(bytes))
+
+extern long usb_calc_bus_time(int speed, int is_input,
+			int isoc, int bytecount);
+
+/*-------------------------------------------------------------------------*/
+
+extern void usb_set_device_state(struct usb_device *udev,
+		enum usb_device_state new_state);
+
+/*-------------------------------------------------------------------------*/
+
+/* exported only within usbcore */
+
+extern struct list_head usb_bus_list;
+extern struct mutex usb_bus_list_lock;
+extern wait_queue_head_t usb_kill_urb_queue;
+
+extern int usb_find_interface_driver(struct usb_device *dev,
+	struct usb_interface *interface);
+
+#define usb_endpoint_out(ep_dir)	(!((ep_dir) & USB_DIR_IN))
+
+#ifdef CONFIG_PM
+extern void usb_root_hub_lost_power(struct usb_device *rhdev);
+extern int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg);
+extern int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg);
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_USB_SUSPEND
+extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd);
+#else
+static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd)
+{
+	return;
+}
+#endif /* CONFIG_USB_SUSPEND */
+
+
+/*
+ * USB device fs stuff
+ */
+
+#ifdef CONFIG_USB_DEVICEFS
+
+/*
+ * these are expected to be called from the USB core/hub thread
+ * with the kernel lock held
+ */
+extern void usbfs_update_special(void);
+extern int usbfs_init(void);
+extern void usbfs_cleanup(void);
+
+#else /* CONFIG_USB_DEVICEFS */
+
+static inline void usbfs_update_special(void) {}
+static inline int usbfs_init(void) { return 0; }
+static inline void usbfs_cleanup(void) { }
+
+#endif /* CONFIG_USB_DEVICEFS */
+
+/*-------------------------------------------------------------------------*/
+
+#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
+
+struct usb_mon_operations {
+	void (*urb_submit)(struct usb_bus *bus, struct urb *urb);
+	void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err);
+	void (*urb_complete)(struct usb_bus *bus, struct urb *urb, int status);
+	/* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */
+};
+
+extern struct usb_mon_operations *mon_ops;
+
+static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb)
+{
+	if (bus->monitored)
+		(*mon_ops->urb_submit)(bus, urb);
+}
+
+static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
+    int error)
+{
+	if (bus->monitored)
+		(*mon_ops->urb_submit_error)(bus, urb, error);
+}
+
+static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
+		int status)
+{
+	if (bus->monitored)
+		(*mon_ops->urb_complete)(bus, urb, status);
+}
+
+int usb_mon_register(struct usb_mon_operations *ops);
+void usb_mon_deregister(void);
+
+#else
+
+static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) {}
+static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
+    int error) {}
+static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
+		int status) {}
+
+#endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */
+
+/*-------------------------------------------------------------------------*/
+
+/* random stuff */
+
+#define	RUN_CONTEXT (in_irq() ? "in_irq" \
+		: (in_interrupt() ? "in_interrupt" : "can sleep"))
+
+
+/* This rwsem is for use only by the hub driver and ehci-hcd.
+ * Nobody else should touch it.
+ */
+extern struct rw_semaphore ehci_cf_port_reset_rwsem;
+
+/* Keep track of which host controller drivers are loaded */
+#define USB_UHCI_LOADED		0
+#define USB_OHCI_LOADED		1
+#define USB_EHCI_LOADED		2
+extern unsigned long usb_hcds_loaded;
+
+#endif /* __KERNEL__ */
+
+#endif /* __USB_CORE_HCD_H */
diff --git a/include/linux/usb/input.h b/include/linux/usb/input.h
new file mode 100644
index 00000000..0e010b22
--- /dev/null
+++ b/include/linux/usb/input.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2005 Dmitry Torokhov
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef __LINUX_USB_INPUT_H
+#define __LINUX_USB_INPUT_H
+
+#include <linux/usb.h>
+#include <linux/input.h>
+#include <asm/byteorder.h>
+
+static inline void
+usb_to_input_id(const struct usb_device *dev, struct input_id *id)
+{
+	id->bustype = BUS_USB;
+	id->vendor = le16_to_cpu(dev->descriptor.idVendor);
+	id->product = le16_to_cpu(dev->descriptor.idProduct);
+	id->version = le16_to_cpu(dev->descriptor.bcdDevice);
+}
+
+#endif /* __LINUX_USB_INPUT_H */
diff --git a/include/linux/usb/intel_mid_otg.h b/include/linux/usb/intel_mid_otg.h
new file mode 100644
index 00000000..756cf554
--- /dev/null
+++ b/include/linux/usb/intel_mid_otg.h
@@ -0,0 +1,180 @@
+/*
+ * Intel MID (Langwell/Penwell) USB OTG Transceiver driver
+ * Copyright (C) 2008 - 2010, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef __INTEL_MID_OTG_H
+#define __INTEL_MID_OTG_H
+
+#include <linux/pm.h>
+#include <linux/usb/otg.h>
+#include <linux/notifier.h>
+
+struct intel_mid_otg_xceiv;
+
+/* This is a common data structure for Intel MID platform to
+ * save values of the OTG state machine */
+struct otg_hsm {
+	/* Input */
+	int a_bus_resume;
+	int a_bus_suspend;
+	int a_conn;
+	int a_sess_vld;
+	int a_srp_det;
+	int a_vbus_vld;
+	int b_bus_resume;
+	int b_bus_suspend;
+	int b_conn;
+	int b_se0_srp;
+	int b_ssend_srp;
+	int b_sess_end;
+	int b_sess_vld;
+	int id;
+/* id values */
+#define ID_B		0x05
+#define ID_A		0x04
+#define ID_ACA_C	0x03
+#define ID_ACA_B	0x02
+#define ID_ACA_A	0x01
+	int power_up;
+	int adp_change;
+	int test_device;
+
+	/* Internal variables */
+	int a_set_b_hnp_en;
+	int b_srp_done;
+	int b_hnp_enable;
+	int hnp_poll_enable;
+
+	/* Timeout indicator for timers */
+	int a_wait_vrise_tmout;
+	int a_wait_bcon_tmout;
+	int a_aidl_bdis_tmout;
+	int a_bidl_adis_tmout;
+	int a_bidl_adis_tmr;
+	int a_wait_vfall_tmout;
+	int b_ase0_brst_tmout;
+	int b_bus_suspend_tmout;
+	int b_srp_init_tmout;
+	int b_srp_fail_tmout;
+	int b_srp_fail_tmr;
+	int b_adp_sense_tmout;
+
+	/* Informative variables */
+	int a_bus_drop;
+	int a_bus_req;
+	int a_clr_err;
+	int b_bus_req;
+	int a_suspend_req;
+	int b_bus_suspend_vld;
+
+	/* Output */
+	int drv_vbus;
+	int loc_conn;
+	int loc_sof;
+
+	/* Others */
+	int vbus_srp_up;
+};
+
+/* must provide ULPI access function to read/write registers implemented in
+ * ULPI address space */
+struct iotg_ulpi_access_ops {
+	int	(*read)(struct intel_mid_otg_xceiv *iotg, u8 reg, u8 *val);
+	int	(*write)(struct intel_mid_otg_xceiv *iotg, u8 reg, u8 val);
+};
+
+#define OTG_A_DEVICE	0x0
+#define OTG_B_DEVICE	0x1
+
+/*
+ * the Intel MID (Langwell/Penwell) otg transceiver driver needs to interact
+ * with device and host drivers to implement the USB OTG related feature. More
+ * function members are added based on usb_phy data structure for this
+ * purpose.
+ */
+struct intel_mid_otg_xceiv {
+	struct usb_phy		otg;
+	struct otg_hsm		hsm;
+
+	/* base address */
+	void __iomem		*base;
+
+	/* ops to access ulpi */
+	struct iotg_ulpi_access_ops	ulpi_ops;
+
+	/* atomic notifier for interrupt context */
+	struct atomic_notifier_head	iotg_notifier;
+
+	/* start/stop USB Host function */
+	int	(*start_host)(struct intel_mid_otg_xceiv *iotg);
+	int	(*stop_host)(struct intel_mid_otg_xceiv *iotg);
+
+	/* start/stop USB Peripheral function */
+	int	(*start_peripheral)(struct intel_mid_otg_xceiv *iotg);
+	int	(*stop_peripheral)(struct intel_mid_otg_xceiv *iotg);
+
+	/* start/stop ADP sense/probe function */
+	int	(*set_adp_probe)(struct intel_mid_otg_xceiv *iotg,
+					bool enabled, int dev);
+	int	(*set_adp_sense)(struct intel_mid_otg_xceiv *iotg,
+					bool enabled);
+
+#ifdef CONFIG_PM
+	/* suspend/resume USB host function */
+	int	(*suspend_host)(struct intel_mid_otg_xceiv *iotg,
+					pm_message_t message);
+	int	(*resume_host)(struct intel_mid_otg_xceiv *iotg);
+
+	int	(*suspend_peripheral)(struct intel_mid_otg_xceiv *iotg,
+					pm_message_t message);
+	int	(*resume_peripheral)(struct intel_mid_otg_xceiv *iotg);
+#endif
+
+};
+static inline
+struct intel_mid_otg_xceiv *otg_to_mid_xceiv(struct usb_phy *otg)
+{
+	return container_of(otg, struct intel_mid_otg_xceiv, otg);
+}
+
+#define MID_OTG_NOTIFY_CONNECT		0x0001
+#define MID_OTG_NOTIFY_DISCONN		0x0002
+#define MID_OTG_NOTIFY_HSUSPEND		0x0003
+#define MID_OTG_NOTIFY_HRESUME		0x0004
+#define MID_OTG_NOTIFY_CSUSPEND		0x0005
+#define MID_OTG_NOTIFY_CRESUME		0x0006
+#define MID_OTG_NOTIFY_HOSTADD		0x0007
+#define MID_OTG_NOTIFY_HOSTREMOVE	0x0008
+#define MID_OTG_NOTIFY_CLIENTADD	0x0009
+#define MID_OTG_NOTIFY_CLIENTREMOVE	0x000a
+
+static inline int
+intel_mid_otg_register_notifier(struct intel_mid_otg_xceiv *iotg,
+				struct notifier_block *nb)
+{
+	return atomic_notifier_chain_register(&iotg->iotg_notifier, nb);
+}
+
+static inline void
+intel_mid_otg_unregister_notifier(struct intel_mid_otg_xceiv *iotg,
+				struct notifier_block *nb)
+{
+	atomic_notifier_chain_unregister(&iotg->iotg_notifier, nb);
+}
+
+#endif /* __INTEL_MID_OTG_H */
diff --git a/include/linux/usb/iowarrior.h b/include/linux/usb/iowarrior.h
new file mode 100644
index 00000000..4fd6513d
--- /dev/null
+++ b/include/linux/usb/iowarrior.h
@@ -0,0 +1,42 @@
+#ifndef __LINUX_USB_IOWARRIOR_H
+#define __LINUX_USB_IOWARRIOR_H
+
+#define CODEMERCS_MAGIC_NUMBER	0xC0	/* like COde Mercenaries */
+
+/* Define the ioctl commands for reading and writing data */
+#define IOW_WRITE	_IOW(CODEMERCS_MAGIC_NUMBER, 1, __u8 *)
+#define IOW_READ	_IOW(CODEMERCS_MAGIC_NUMBER, 2, __u8 *)
+
+/*
+   A struct for available device info which is read
+   with the ioctl IOW_GETINFO.
+   To be compatible with 2.4 userspace which didn't have an easy way to get
+   this information.
+*/
+struct iowarrior_info {
+	/* vendor id : supposed to be USB_VENDOR_ID_CODEMERCS in all cases */
+	__u32 vendor;
+	/* product id : depends on type of chip (USB_DEVICE_ID_CODEMERCS_X) */
+	__u32 product;
+	/* the serial number of our chip (if a serial-number is not available
+	 * this is empty string) */
+	__u8 serial[9];
+	/* revision number of the chip */
+	__u32 revision;
+	/* USB-speed of the device (0=UNKNOWN, 1=LOW, 2=FULL 3=HIGH) */
+	__u32 speed;
+	/* power consumption of the device in mA */
+	__u32 power;
+	/* the number of the endpoint */
+	__u32 if_num;
+	/* size of the data-packets on this interface */
+	__u32 report_size;
+};
+
+/*
+  Get some device-information (product-id , serial-number etc.)
+  in order to identify a chip.
+*/
+#define IOW_GETINFO _IOR(CODEMERCS_MAGIC_NUMBER, 3, struct iowarrior_info)
+
+#endif /* __LINUX_USB_IOWARRIOR_H */
diff --git a/include/linux/usb/irda.h b/include/linux/usb/irda.h
new file mode 100644
index 00000000..e345ceaf
--- /dev/null
+++ b/include/linux/usb/irda.h
@@ -0,0 +1,151 @@
+/*
+ * USB IrDA Bridge Device Definition
+ */
+
+#ifndef __LINUX_USB_IRDA_H
+#define __LINUX_USB_IRDA_H
+
+/* This device should use Application-specific class */
+
+#define USB_SUBCLASS_IRDA			0x02
+
+/*-------------------------------------------------------------------------*/
+
+/* Class-Specific requests (bRequest field) */
+
+#define USB_REQ_CS_IRDA_RECEIVING		1
+#define USB_REQ_CS_IRDA_CHECK_MEDIA_BUSY	3
+#define USB_REQ_CS_IRDA_RATE_SNIFF		4
+#define USB_REQ_CS_IRDA_UNICAST_LIST		5
+#define USB_REQ_CS_IRDA_GET_CLASS_DESC		6
+
+/*-------------------------------------------------------------------------*/
+
+/* Class-Specific descriptor */
+
+#define USB_DT_CS_IRDA				0x21
+
+/*-------------------------------------------------------------------------*/
+
+/* Data sizes */
+
+#define USB_IRDA_DS_2048			(1 << 5)
+#define USB_IRDA_DS_1024			(1 << 4)
+#define USB_IRDA_DS_512				(1 << 3)
+#define USB_IRDA_DS_256				(1 << 2)
+#define USB_IRDA_DS_128				(1 << 1)
+#define USB_IRDA_DS_64				(1 << 0)
+
+/* Window sizes */
+
+#define USB_IRDA_WS_7				(1 << 6)
+#define USB_IRDA_WS_6				(1 << 5)
+#define USB_IRDA_WS_5				(1 << 4)
+#define USB_IRDA_WS_4				(1 << 3)
+#define USB_IRDA_WS_3				(1 << 2)
+#define USB_IRDA_WS_2				(1 << 1)
+#define USB_IRDA_WS_1				(1 << 0)
+
+/* Min turnaround times in usecs */
+
+#define USB_IRDA_MTT_0				(1 << 7)
+#define USB_IRDA_MTT_10				(1 << 6)
+#define USB_IRDA_MTT_50				(1 << 5)
+#define USB_IRDA_MTT_100			(1 << 4)
+#define USB_IRDA_MTT_500			(1 << 3)
+#define USB_IRDA_MTT_1000			(1 << 2)
+#define USB_IRDA_MTT_5000			(1 << 1)
+#define USB_IRDA_MTT_10000			(1 << 0)
+
+/* Baud rates */
+
+#define USB_IRDA_BR_4000000			(1 << 8)
+#define USB_IRDA_BR_1152000			(1 << 7)
+#define USB_IRDA_BR_576000			(1 << 6)
+#define USB_IRDA_BR_115200			(1 << 5)
+#define USB_IRDA_BR_57600			(1 << 4)
+#define USB_IRDA_BR_38400			(1 << 3)
+#define USB_IRDA_BR_19200			(1 << 2)
+#define USB_IRDA_BR_9600			(1 << 1)
+#define USB_IRDA_BR_2400			(1 << 0)
+
+/* Additional BOFs */
+
+#define USB_IRDA_AB_0				(1 << 7)
+#define USB_IRDA_AB_1				(1 << 6)
+#define USB_IRDA_AB_2				(1 << 5)
+#define USB_IRDA_AB_3				(1 << 4)
+#define USB_IRDA_AB_6				(1 << 3)
+#define USB_IRDA_AB_12				(1 << 2)
+#define USB_IRDA_AB_24				(1 << 1)
+#define USB_IRDA_AB_48				(1 << 0)
+
+/* IRDA Rate Sniff */
+
+#define USB_IRDA_RATE_SNIFF			1
+
+/*-------------------------------------------------------------------------*/
+
+struct usb_irda_cs_descriptor {
+	__u8	bLength;
+	__u8	bDescriptorType;
+
+	__le16	bcdSpecRevision;
+	__u8	bmDataSize;
+	__u8	bmWindowSize;
+	__u8	bmMinTurnaroundTime;
+	__le16	wBaudRate;
+	__u8	bmAdditionalBOFs;
+	__u8	bIrdaRateSniff;
+	__u8	bMaxUnicastList;
+} __attribute__ ((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* Data Format */
+
+#define USB_IRDA_STATUS_MEDIA_BUSY	(1 << 7)
+
+/* The following is a 4-bit value used for both
+ * inbound and outbound headers:
+ *
+ * 0 - speed ignored
+ * 1 - 2400 bps
+ * 2 - 9600 bps
+ * 3 - 19200 bps
+ * 4 - 38400 bps
+ * 5 - 57600 bps
+ * 6 - 115200 bps
+ * 7 - 576000 bps
+ * 8 - 1.152 Mbps
+ * 9 - 5 mbps
+ * 10..15 - Reserved
+ */
+#define USB_IRDA_STATUS_LINK_SPEED	0x0f
+
+/* The following is a 4-bit value used only for
+ * outbound header:
+ *
+ * 0 - No change (BOF ignored)
+ * 1 - 48 BOFs
+ * 2 - 24 BOFs
+ * 3 - 12 BOFs
+ * 4 - 6 BOFs
+ * 5 - 3 BOFs
+ * 6 - 2 BOFs
+ * 7 - 1 BOFs
+ * 8 - 0 BOFs
+ * 9..15 - Reserved
+ */
+#define USB_IRDA_EXTRA_BOFS		0xf0
+
+struct usb_irda_inbound_header {
+	__u8		bmStatus;
+};
+
+struct usb_irda_outbound_header {
+	__u8		bmChange;
+};
+
+#endif /* __LINUX_USB_IRDA_H */
+
diff --git a/include/linux/usb/isp116x.h b/include/linux/usb/isp116x.h
new file mode 100644
index 00000000..96ca114e
--- /dev/null
+++ b/include/linux/usb/isp116x.h
@@ -0,0 +1,33 @@
+/*
+ * Board initialization code should put one of these into dev->platform_data
+ * and place the isp116x onto platform_bus.
+ */
+
+#ifndef __LINUX_USB_ISP116X_H
+#define __LINUX_USB_ISP116X_H
+
+struct isp116x_platform_data {
+	/* Enable internal resistors on downstream ports */
+	unsigned sel15Kres:1;
+	/* On-chip overcurrent detection */
+	unsigned oc_enable:1;
+	/* INT output polarity */
+	unsigned int_act_high:1;
+	/* INT edge or level triggered */
+	unsigned int_edge_triggered:1;
+	/* Enable wakeup by devices on usb bus (e.g. wakeup
+	   by attachment/detachment or by device activity
+	   such as moving a mouse). When chosen, this option
+	   prevents stopping internal clock, increasing
+	   thereby power consumption in suspended state. */
+	unsigned remote_wakeup_enable:1;
+	/* Inter-io delay (ns). The chip is picky about access timings; it
+	   expects at least:
+	   150ns delay between consecutive accesses to DATA_REG,
+	   300ns delay between access to ADDR_REG and DATA_REG
+	   OE, WE MUST NOT be changed during these intervals
+	 */
+	void (*delay) (struct device *dev, int delay);
+};
+
+#endif /* __LINUX_USB_ISP116X_H */
diff --git a/include/linux/usb/isp1362.h b/include/linux/usb/isp1362.h
new file mode 100644
index 00000000..642684bb
--- /dev/null
+++ b/include/linux/usb/isp1362.h
@@ -0,0 +1,46 @@
+/*
+ * board initialization code should put one of these into dev->platform_data
+ * and place the isp1362 onto platform_bus.
+ */
+
+#ifndef __LINUX_USB_ISP1362_H__
+#define __LINUX_USB_ISP1362_H__
+
+struct isp1362_platform_data {
+	/* Enable internal pulldown resistors on downstream ports */
+	unsigned sel15Kres:1;
+	/* Clock cannot be stopped */
+	unsigned clknotstop:1;
+	/* On-chip overcurrent protection */
+	unsigned oc_enable:1;
+	/* INT output polarity */
+	unsigned int_act_high:1;
+	/* INT edge or level triggered */
+	unsigned int_edge_triggered:1;
+	/* DREQ output polarity */
+	unsigned dreq_act_high:1;
+	/* DACK input polarity */
+	unsigned dack_act_high:1;
+	/* chip can be resumed via H_WAKEUP pin */
+	unsigned remote_wakeup_connected:1;
+	/* Switch or not to switch (keep always powered) */
+	unsigned no_power_switching:1;
+	/* Ganged port power switching (0) or individual port power switching (1) */
+	unsigned power_switching_mode:1;
+	/* Given port_power, msec/2 after power on till power good */
+	u8 potpg;
+	/* Hardware reset set/clear */
+	void (*reset) (struct device *dev, int set);
+	/* Clock start/stop */
+	void (*clock) (struct device *dev, int start);
+	/* Inter-io delay (ns). The chip is picky about access timings; it
+	 * expects at least:
+	 * 110ns delay between consecutive accesses to DATA_REG,
+	 * 300ns delay between access to ADDR_REG and DATA_REG (registers)
+	 * 462ns delay between access to ADDR_REG and DATA_REG (buffer memory)
+	 * WE MUST NOT be activated during these intervals (even without CS!)
+	 */
+	void (*delay) (struct device *dev, unsigned int delay);
+};
+
+#endif
diff --git a/include/linux/usb/isp1760.h b/include/linux/usb/isp1760.h
new file mode 100644
index 00000000..de7de53c
--- /dev/null
+++ b/include/linux/usb/isp1760.h
@@ -0,0 +1,18 @@
+/*
+ * board initialization should put one of these into dev->platform_data
+ * and place the isp1760 onto platform_bus named "isp1760-hcd".
+ */
+
+#ifndef __LINUX_USB_ISP1760_H
+#define __LINUX_USB_ISP1760_H
+
+struct isp1760_platform_data {
+	unsigned is_isp1761:1;			/* Chip is ISP1761 */
+	unsigned bus_width_16:1;		/* 16/32-bit data bus width */
+	unsigned port1_otg:1;			/* Port 1 supports OTG */
+	unsigned analog_oc:1;			/* Analog overcurrent */
+	unsigned dack_polarity_high:1;		/* DACK active high */
+	unsigned dreq_polarity_high:1;		/* DREQ active high */
+};
+
+#endif /* __LINUX_USB_ISP1760_H */
diff --git a/include/linux/usb/langwell_udc.h b/include/linux/usb/langwell_udc.h
new file mode 100644
index 00000000..2d2d1bba
--- /dev/null
+++ b/include/linux/usb/langwell_udc.h
@@ -0,0 +1,310 @@
+/*
+ * Intel Langwell USB Device Controller driver
+ * Copyright (C) 2008-2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef __LANGWELL_UDC_H
+#define __LANGWELL_UDC_H
+
+
+/* MACRO defines */
+#define	CAP_REG_OFFSET		0x0
+#define	OP_REG_OFFSET		0x28
+
+#define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
+
+#define	DQH_ALIGNMENT		2048
+#define	DTD_ALIGNMENT		64
+#define	DMA_BOUNDARY		4096
+
+#define	EP0_MAX_PKT_SIZE	64
+#define EP_DIR_IN		1
+#define EP_DIR_OUT		0
+
+#define FLUSH_TIMEOUT		1000
+#define RESET_TIMEOUT		1000
+#define SETUPSTAT_TIMEOUT	100
+#define PRIME_TIMEOUT		100
+
+
+/* device memory space registers */
+
+/* Capability Registers, BAR0 + CAP_REG_OFFSET */
+struct langwell_cap_regs {
+	/* offset: 0x0 */
+	u8	caplength;	/* offset of Operational Register */
+	u8	_reserved3;
+	u16	hciversion;	/* H: BCD encoding of host version */
+	u32	hcsparams;	/* H: host port steering logic capability */
+	u32	hccparams;	/* H: host multiple mode control capability */
+#define	HCC_LEN	BIT(17)		/* Link power management (LPM) capability */
+	u8	_reserved4[0x20-0xc];
+	/* offset: 0x20 */
+	u16	dciversion;	/* BCD encoding of device version */
+	u8	_reserved5[0x24-0x22];
+	u32	dccparams;	/* overall device controller capability */
+#define	HOSTCAP	BIT(8)		/* host capable */
+#define	DEVCAP	BIT(7)		/* device capable */
+#define DEN(d)	\
+	(((d)>>0)&0x1f)		/* bits 4:0, device endpoint number */
+} __attribute__ ((packed));
+
+
+/* Operational Registers, BAR0 + OP_REG_OFFSET */
+struct langwell_op_regs {
+	/* offset: 0x28 */
+	u32	extsts;
+#define	EXTS_TI1	BIT(4)	/* general purpose timer interrupt 1 */
+#define	EXTS_TI1TI0	BIT(3)	/* general purpose timer interrupt 0 */
+#define	EXTS_TI1UPI	BIT(2)	/* USB host periodic interrupt */
+#define	EXTS_TI1UAI	BIT(1)	/* USB host asynchronous interrupt */
+#define	EXTS_TI1NAKI	BIT(0)	/* NAK interrupt */
+	u32	extintr;
+#define	EXTI_TIE1	BIT(4)	/* general purpose timer interrupt enable 1 */
+#define	EXTI_TIE0	BIT(3)	/* general purpose timer interrupt enable 0 */
+#define	EXTI_UPIE	BIT(2)	/* USB host periodic interrupt enable */
+#define	EXTI_UAIE	BIT(1)	/* USB host asynchronous interrupt enable */
+#define	EXTI_NAKE	BIT(0)	/* NAK interrupt enable */
+	/* offset: 0x30 */
+	u32	usbcmd;
+#define	CMD_HIRD(u)	\
+	(((u)>>24)&0xf)		/* bits 27:24, host init resume duration */
+#define	CMD_ITC(u)	\
+	(((u)>>16)&0xff)	/* bits 23:16, interrupt threshold control */
+#define	CMD_PPE		BIT(15)	/* per-port change events enable */
+#define	CMD_ATDTW	BIT(14)	/* add dTD tripwire */
+#define	CMD_SUTW	BIT(13)	/* setup tripwire */
+#define	CMD_ASPE	BIT(11) /* asynchronous schedule park mode enable */
+#define	CMD_FS2		BIT(10)	/* frame list size */
+#define	CMD_ASP1	BIT(9)	/* asynchronous schedule park mode count */
+#define	CMD_ASP0	BIT(8)
+#define	CMD_LR		BIT(7)	/* light host/device controller reset */
+#define	CMD_IAA		BIT(6)	/* interrupt on async advance doorbell */
+#define	CMD_ASE		BIT(5)	/* asynchronous schedule enable */
+#define	CMD_PSE		BIT(4)	/* periodic schedule enable */
+#define	CMD_FS1		BIT(3)
+#define	CMD_FS0		BIT(2)
+#define	CMD_RST		BIT(1)	/* controller reset */
+#define	CMD_RUNSTOP	BIT(0)	/* run/stop */
+	u32	usbsts;
+#define	STS_PPCI(u)	\
+	(((u)>>16)&0xffff)	/* bits 31:16, port-n change detect */
+#define	STS_AS		BIT(15)	/* asynchronous schedule status */
+#define	STS_PS		BIT(14)	/* periodic schedule status */
+#define	STS_RCL		BIT(13)	/* reclamation */
+#define	STS_HCH		BIT(12)	/* HC halted */
+#define	STS_ULPII	BIT(10)	/* ULPI interrupt */
+#define	STS_SLI		BIT(8)	/* DC suspend */
+#define	STS_SRI		BIT(7)	/* SOF received */
+#define	STS_URI		BIT(6)	/* USB reset received */
+#define	STS_AAI		BIT(5)	/* interrupt on async advance */
+#define	STS_SEI		BIT(4)	/* system error */
+#define	STS_FRI		BIT(3)	/* frame list rollover */
+#define	STS_PCI		BIT(2)	/* port change detect */
+#define	STS_UEI		BIT(1)	/* USB error interrupt */
+#define	STS_UI		BIT(0)	/* USB interrupt */
+	u32	usbintr;
+/* bits 31:16, per-port interrupt enable */
+#define	INTR_PPCE(u)	(((u)>>16)&0xffff)
+#define	INTR_ULPIE	BIT(10)	/* ULPI enable */
+#define	INTR_SLE	BIT(8)	/* DC sleep/suspend enable */
+#define	INTR_SRE	BIT(7)	/* SOF received enable */
+#define	INTR_URE	BIT(6)	/* USB reset enable */
+#define	INTR_AAE	BIT(5)	/* interrupt on async advance enable */
+#define	INTR_SEE	BIT(4)	/* system error enable */
+#define	INTR_FRE	BIT(3)	/* frame list rollover enable */
+#define	INTR_PCE	BIT(2)	/* port change detect enable */
+#define	INTR_UEE	BIT(1)	/* USB error interrupt enable */
+#define	INTR_UE		BIT(0)	/* USB interrupt enable */
+	u32	frindex;	/* frame index */
+#define	FRINDEX_MASK	(0x3fff << 0)
+	u32	ctrldssegment;	/* not used */
+	u32	deviceaddr;
+#define USBADR_SHIFT	25
+#define	USBADR(d)	\
+	(((d)>>25)&0x7f)	/* bits 31:25, device address */
+#define USBADR_MASK	(0x7f << 25)
+#define	USBADRA		BIT(24)	/* device address advance */
+	u32	endpointlistaddr;/* endpoint list top memory address */
+/* bits 31:11, endpoint list pointer */
+#define	EPBASE(d)	(((d)>>11)&0x1fffff)
+#define	ENDPOINTLISTADDR_MASK	(0x1fffff << 11)
+	u32	ttctrl;		/* H: TT operatin, not used */
+	/* offset: 0x50 */
+	u32	burstsize;	/* burst size of data movement */
+#define	TXPBURST(b)	\
+	(((b)>>8)&0xff)		/* bits 15:8, TX burst length */
+#define	RXPBURST(b)	\
+	(((b)>>0)&0xff)		/* bits 7:0, RX burst length */
+	u32	txfilltuning;	/* TX tuning */
+	u32	txttfilltuning;	/* H: TX TT tuning */
+	u32	ic_usb;		/* control the IC_USB FS/LS transceiver */
+	/* offset: 0x60 */
+	u32	ulpi_viewport;	/* indirect access to ULPI PHY */
+#define	ULPIWU		BIT(31)	/* ULPI wakeup */
+#define	ULPIRUN		BIT(30)	/* ULPI read/write run */
+#define	ULPIRW		BIT(29)	/* ULPI read/write control */
+#define	ULPISS		BIT(27)	/* ULPI sync state */
+#define	ULPIPORT(u)	\
+	(((u)>>24)&7)		/* bits 26:24, ULPI port number */
+#define	ULPIADDR(u)	\
+	(((u)>>16)&0xff)	/* bits 23:16, ULPI data address */
+#define	ULPIDATRD(u)	\
+	(((u)>>8)&0xff)		/* bits 15:8, ULPI data read */
+#define	ULPIDATWR(u)	\
+	(((u)>>0)&0xff)		/* bits 7:0, ULPI date write */
+	u8	_reserved6[0x70-0x64];
+	/* offset: 0x70 */
+	u32	configflag;	/* H: not used */
+	u32	portsc1;	/* port status */
+#define	DA(p)	\
+	(((p)>>25)&0x7f)	/* bits 31:25, device address */
+#define	PORTS_SSTS	(BIT(24) | BIT(23))	/* suspend status */
+#define	PORTS_WKOC	BIT(22)	/* wake on over-current enable */
+#define	PORTS_WKDS	BIT(21)	/* wake on disconnect enable */
+#define	PORTS_WKCN	BIT(20)	/* wake on connect enable */
+#define	PORTS_PTC(p)	(((p)>>16)&0xf)	/* bits 19:16, port test control */
+#define	PORTS_PIC	(BIT(15) | BIT(14))	/* port indicator control */
+#define	PORTS_PO	BIT(13)	/* port owner */
+#define	PORTS_PP	BIT(12)	/* port power */
+#define	PORTS_LS	(BIT(11) | BIT(10))	/* line status */
+#define	PORTS_SLP	BIT(9)	/* suspend using L1 */
+#define	PORTS_PR	BIT(8)	/* port reset */
+#define	PORTS_SUSP	BIT(7)	/* suspend */
+#define	PORTS_FPR	BIT(6)	/* force port resume */
+#define	PORTS_OCC	BIT(5)	/* over-current change */
+#define	PORTS_OCA	BIT(4)	/* over-current active */
+#define	PORTS_PEC	BIT(3)	/* port enable/disable change */
+#define	PORTS_PE	BIT(2)	/* port enable/disable */
+#define	PORTS_CSC	BIT(1)	/* connect status change */
+#define	PORTS_CCS	BIT(0)	/* current connect status */
+	u8	_reserved7[0xb4-0x78];
+	/* offset: 0xb4 */
+	u32	devlc;		/* control LPM and each USB port behavior */
+/* bits 31:29, parallel transceiver select */
+#define	LPM_PTS(d)	(((d)>>29)&7)
+#define	LPM_STS		BIT(28)	/* serial transceiver select */
+#define	LPM_PTW		BIT(27)	/* parallel transceiver width */
+#define	LPM_PSPD(d)	(((d)>>25)&3)	/* bits 26:25, port speed */
+#define LPM_PSPD_MASK	(BIT(26) | BIT(25))
+#define LPM_SPEED_FULL	0
+#define LPM_SPEED_LOW	1
+#define LPM_SPEED_HIGH	2
+#define	LPM_SRT		BIT(24)	/* shorten reset time */
+#define	LPM_PFSC	BIT(23)	/* port force full speed connect */
+#define	LPM_PHCD	BIT(22) /* PHY low power suspend clock disable */
+#define	LPM_STL		BIT(16)	/* STALL reply to LPM token */
+#define	LPM_BA(d)	\
+	(((d)>>1)&0x7ff)	/* bits 11:1, BmAttributes */
+#define	LPM_NYT_ACK	BIT(0)	/* NYET/ACK reply to LPM token */
+	u8	_reserved8[0xf4-0xb8];
+	/* offset: 0xf4 */
+	u32	otgsc;		/* On-The-Go status and control */
+#define	OTGSC_DPIE	BIT(30)	/* data pulse interrupt enable */
+#define	OTGSC_MSE	BIT(29)	/* 1 ms timer interrupt enable */
+#define	OTGSC_BSEIE	BIT(28)	/* B session end interrupt enable */
+#define	OTGSC_BSVIE	BIT(27)	/* B session valid interrupt enable */
+#define	OTGSC_ASVIE	BIT(26)	/* A session valid interrupt enable */
+#define	OTGSC_AVVIE	BIT(25)	/* A VBUS valid interrupt enable */
+#define	OTGSC_IDIE	BIT(24)	/* USB ID interrupt enable */
+#define	OTGSC_DPIS	BIT(22)	/* data pulse interrupt status */
+#define	OTGSC_MSS	BIT(21)	/* 1 ms timer interrupt status */
+#define	OTGSC_BSEIS	BIT(20)	/* B session end interrupt status */
+#define	OTGSC_BSVIS	BIT(19)	/* B session valid interrupt status */
+#define	OTGSC_ASVIS	BIT(18)	/* A session valid interrupt status */
+#define	OTGSC_AVVIS	BIT(17)	/* A VBUS valid interrupt status */
+#define	OTGSC_IDIS	BIT(16)	/* USB ID interrupt status */
+#define	OTGSC_DPS	BIT(14)	/* data bus pulsing status */
+#define	OTGSC_MST	BIT(13)	/* 1 ms timer toggle */
+#define	OTGSC_BSE	BIT(12)	/* B session end */
+#define	OTGSC_BSV	BIT(11)	/* B session valid */
+#define	OTGSC_ASV	BIT(10)	/* A session valid */
+#define	OTGSC_AVV	BIT(9)	/* A VBUS valid */
+#define	OTGSC_USBID	BIT(8)	/* USB ID */
+#define	OTGSC_HABA	BIT(7)	/* hw assist B-disconnect to A-connect */
+#define	OTGSC_HADP	BIT(6)	/* hw assist data pulse */
+#define	OTGSC_IDPU	BIT(5)	/* ID pullup */
+#define	OTGSC_DP	BIT(4)	/* data pulsing */
+#define	OTGSC_OT	BIT(3)	/* OTG termination */
+#define	OTGSC_HAAR	BIT(2)	/* hw assist auto reset */
+#define	OTGSC_VC	BIT(1)	/* VBUS charge */
+#define	OTGSC_VD	BIT(0)	/* VBUS discharge */
+	u32	usbmode;
+#define	MODE_VBPS	BIT(5)	/* R/W VBUS power select */
+#define	MODE_SDIS	BIT(4)	/* R/W stream disable mode */
+#define	MODE_SLOM	BIT(3)	/* R/W setup lockout mode */
+#define	MODE_ENSE	BIT(2)	/* endian select */
+#define	MODE_CM(u)	(((u)>>0)&3)	/* bits 1:0, controller mode */
+#define	MODE_IDLE	0
+#define	MODE_DEVICE	2
+#define	MODE_HOST	3
+	u8	_reserved9[0x100-0xfc];
+	/* offset: 0x100 */
+	u32	endptnak;
+#define	EPTN(e)		\
+	(((e)>>16)&0xffff)	/* bits 31:16, TX endpoint NAK */
+#define	EPRN(e)		\
+	(((e)>>0)&0xffff)	/* bits 15:0, RX endpoint NAK */
+	u32	endptnaken;
+#define	EPTNE(e)	\
+	(((e)>>16)&0xffff)	/* bits 31:16, TX endpoint NAK enable */
+#define	EPRNE(e)	\
+	(((e)>>0)&0xffff)	/* bits 15:0, RX endpoint NAK enable */
+	u32	endptsetupstat;
+#define	SETUPSTAT_MASK		(0xffff << 0)	/* bits 15:0 */
+#define EP0SETUPSTAT_MASK	1
+	u32	endptprime;
+/* bits 31:16, prime endpoint transmit buffer */
+#define	PETB(e)		(((e)>>16)&0xffff)
+/* bits 15:0, prime endpoint receive buffer */
+#define	PERB(e)		(((e)>>0)&0xffff)
+	/* offset: 0x110 */
+	u32	endptflush;
+/* bits 31:16, flush endpoint transmit buffer */
+#define	FETB(e)		(((e)>>16)&0xffff)
+/* bits 15:0, flush endpoint receive buffer */
+#define	FERB(e)		(((e)>>0)&0xffff)
+	u32	endptstat;
+/* bits 31:16, endpoint transmit buffer ready */
+#define	ETBR(e)		(((e)>>16)&0xffff)
+/* bits 15:0, endpoint receive buffer ready */
+#define	ERBR(e)		(((e)>>0)&0xffff)
+	u32	endptcomplete;
+/* bits 31:16, endpoint transmit complete event */
+#define	ETCE(e)		(((e)>>16)&0xffff)
+/* bits 15:0, endpoint receive complete event */
+#define	ERCE(e)		(((e)>>0)&0xffff)
+	/* offset: 0x11c */
+	u32	endptctrl[16];
+#define	EPCTRL_TXE	BIT(23)	/* TX endpoint enable */
+#define	EPCTRL_TXR	BIT(22)	/* TX data toggle reset */
+#define	EPCTRL_TXI	BIT(21)	/* TX data toggle inhibit */
+#define	EPCTRL_TXT(e)	(((e)>>18)&3)	/* bits 19:18, TX endpoint type */
+#define	EPCTRL_TXT_SHIFT	18
+#define	EPCTRL_TXD	BIT(17)	/* TX endpoint data source */
+#define	EPCTRL_TXS	BIT(16)	/* TX endpoint STALL */
+#define	EPCTRL_RXE	BIT(7)	/* RX endpoint enable */
+#define	EPCTRL_RXR	BIT(6)	/* RX data toggle reset */
+#define	EPCTRL_RXI	BIT(5)	/* RX data toggle inhibit */
+#define	EPCTRL_RXT(e)	(((e)>>2)&3)	/* bits 3:2, RX endpoint type */
+#define	EPCTRL_RXT_SHIFT	2	/* bits 19:18, TX endpoint type */
+#define	EPCTRL_RXD	BIT(1)	/* RX endpoint data sink */
+#define	EPCTRL_RXS	BIT(0)	/* RX endpoint STALL */
+} __attribute__ ((packed));
+
+#endif /* __LANGWELL_UDC_H */
+
diff --git a/include/linux/usb/m66592.h b/include/linux/usb/m66592.h
new file mode 100644
index 00000000..a4ba31ab
--- /dev/null
+++ b/include/linux/usb/m66592.h
@@ -0,0 +1,46 @@
+/*
+ * M66592 driver platform data
+ *
+ * Copyright (C) 2009  Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifndef __LINUX_USB_M66592_H
+#define __LINUX_USB_M66592_H
+
+#define M66592_PLATDATA_XTAL_12MHZ	0x01
+#define M66592_PLATDATA_XTAL_24MHZ	0x02
+#define M66592_PLATDATA_XTAL_48MHZ	0x03
+
+struct m66592_platdata {
+	/* one = on chip controller, zero = external controller */
+	unsigned	on_chip:1;
+
+	/* one = big endian, zero = little endian */
+	unsigned	endian:1;
+
+	/* (external controller only) M66592_PLATDATA_XTAL_nnMHZ */
+	unsigned	xtal:2;
+
+	/* (external controller only) one = 3.3V, zero = 1.5V */
+	unsigned	vif:1;
+
+	/* (external controller only) set one = WR0_N shorted to WR1_N */
+	unsigned	wr0_shorted_to_wr1:1;
+};
+
+#endif /* __LINUX_USB_M66592_H */
+
diff --git a/include/linux/usb/midi.h b/include/linux/usb/midi.h
new file mode 100644
index 00000000..c8c52e3c
--- /dev/null
+++ b/include/linux/usb/midi.h
@@ -0,0 +1,112 @@
+/*
+ * <linux/usb/midi.h> -- USB MIDI definitions.
+ *
+ * Copyright (C) 2006 Thumtronics Pty Ltd.
+ * Developed for Thumtronics by Grey Innovation
+ * Ben Williamson <ben.williamson@greyinnovation.com>
+ *
+ * This software is distributed under the terms of the GNU General Public
+ * License ("GPL") version 2, as published by the Free Software Foundation.
+ *
+ * This file holds USB constants and structures defined
+ * by the USB Device Class Definition for MIDI Devices.
+ * Comments below reference relevant sections of that document:
+ *
+ * http://www.usb.org/developers/devclass_docs/midi10.pdf
+ */
+
+#ifndef __LINUX_USB_MIDI_H
+#define __LINUX_USB_MIDI_H
+
+#include <linux/types.h>
+
+/* A.1  MS Class-Specific Interface Descriptor Subtypes */
+#define USB_MS_HEADER		0x01
+#define USB_MS_MIDI_IN_JACK	0x02
+#define USB_MS_MIDI_OUT_JACK	0x03
+#define USB_MS_ELEMENT		0x04
+
+/* A.2  MS Class-Specific Endpoint Descriptor Subtypes */
+#define USB_MS_GENERAL		0x01
+
+/* A.3  MS MIDI IN and OUT Jack Types */
+#define USB_MS_EMBEDDED		0x01
+#define USB_MS_EXTERNAL		0x02
+
+/* 6.1.2.1  Class-Specific MS Interface Header Descriptor */
+struct usb_ms_header_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubtype;
+	__le16 bcdMSC;
+	__le16 wTotalLength;
+} __attribute__ ((packed));
+
+#define USB_DT_MS_HEADER_SIZE	7
+
+/* 6.1.2.2  MIDI IN Jack Descriptor */
+struct usb_midi_in_jack_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;		/* USB_DT_CS_INTERFACE */
+	__u8  bDescriptorSubtype;	/* USB_MS_MIDI_IN_JACK */
+	__u8  bJackType;		/* USB_MS_EMBEDDED/EXTERNAL */
+	__u8  bJackID;
+	__u8  iJack;
+} __attribute__ ((packed));
+
+#define USB_DT_MIDI_IN_SIZE	6
+
+struct usb_midi_source_pin {
+	__u8  baSourceID;
+	__u8  baSourcePin;
+} __attribute__ ((packed));
+
+/* 6.1.2.3  MIDI OUT Jack Descriptor */
+struct usb_midi_out_jack_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;		/* USB_DT_CS_INTERFACE */
+	__u8  bDescriptorSubtype;	/* USB_MS_MIDI_OUT_JACK */
+	__u8  bJackType;		/* USB_MS_EMBEDDED/EXTERNAL */
+	__u8  bJackID;
+	__u8  bNrInputPins;		/* p */
+	struct usb_midi_source_pin pins[]; /* [p] */
+	/*__u8  iJack;  -- omitted due to variable-sized pins[] */
+} __attribute__ ((packed));
+
+#define USB_DT_MIDI_OUT_SIZE(p)	(7 + 2 * (p))
+
+/* As above, but more useful for defining your own descriptors: */
+#define DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(p)			\
+struct usb_midi_out_jack_descriptor_##p {			\
+	__u8  bLength;						\
+	__u8  bDescriptorType;					\
+	__u8  bDescriptorSubtype;				\
+	__u8  bJackType;					\
+	__u8  bJackID;						\
+	__u8  bNrInputPins;					\
+	struct usb_midi_source_pin pins[p];			\
+	__u8  iJack;						\
+} __attribute__ ((packed))
+
+/* 6.2.2  Class-Specific MS Bulk Data Endpoint Descriptor */
+struct usb_ms_endpoint_descriptor {
+	__u8  bLength;			/* 4+n */
+	__u8  bDescriptorType;		/* USB_DT_CS_ENDPOINT */
+	__u8  bDescriptorSubtype;	/* USB_MS_GENERAL */
+	__u8  bNumEmbMIDIJack;		/* n */
+	__u8  baAssocJackID[];		/* [n] */
+} __attribute__ ((packed));
+
+#define USB_DT_MS_ENDPOINT_SIZE(n)	(4 + (n))
+
+/* As above, but more useful for defining your own descriptors: */
+#define DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(n)			\
+struct usb_ms_endpoint_descriptor_##n {				\
+	__u8  bLength;						\
+	__u8  bDescriptorType;					\
+	__u8  bDescriptorSubtype;				\
+	__u8  bNumEmbMIDIJack;					\
+	__u8  baAssocJackID[n];					\
+} __attribute__ ((packed))
+
+#endif /* __LINUX_USB_MIDI_H */
diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h
new file mode 100644
index 00000000..22a396c1
--- /dev/null
+++ b/include/linux/usb/msm_hsusb.h
@@ -0,0 +1,185 @@
+/* linux/include/asm-arm/arch-msm/hsusb.h
+ *
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ * Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_HSUSB_H
+#define __ASM_ARCH_MSM_HSUSB_H
+
+#include <linux/types.h>
+#include <linux/usb/otg.h>
+
+/**
+ * Supported USB modes
+ *
+ * USB_PERIPHERAL       Only peripheral mode is supported.
+ * USB_HOST             Only host mode is supported.
+ * USB_OTG              OTG mode is supported.
+ *
+ */
+enum usb_mode_type {
+	USB_NONE = 0,
+	USB_PERIPHERAL,
+	USB_HOST,
+	USB_OTG,
+};
+
+/**
+ * OTG control
+ *
+ * OTG_NO_CONTROL	Id/VBUS notifications not required. Useful in host
+ *                      only configuration.
+ * OTG_PHY_CONTROL	Id/VBUS notifications comes form USB PHY.
+ * OTG_PMIC_CONTROL	Id/VBUS notifications comes from PMIC hardware.
+ * OTG_USER_CONTROL	Id/VBUS notifcations comes from User via sysfs.
+ *
+ */
+enum otg_control_type {
+	OTG_NO_CONTROL = 0,
+	OTG_PHY_CONTROL,
+	OTG_PMIC_CONTROL,
+	OTG_USER_CONTROL,
+};
+
+/**
+ * PHY used in
+ *
+ * INVALID_PHY			Unsupported PHY
+ * CI_45NM_INTEGRATED_PHY	Chipidea 45nm integrated PHY
+ * SNPS_28NM_INTEGRATED_PHY	Synopsis 28nm integrated PHY
+ *
+ */
+enum msm_usb_phy_type {
+	INVALID_PHY = 0,
+	CI_45NM_INTEGRATED_PHY,
+	SNPS_28NM_INTEGRATED_PHY,
+};
+
+#define IDEV_CHG_MAX	1500
+#define IUNIT		100
+
+/**
+ * Different states involved in USB charger detection.
+ *
+ * USB_CHG_STATE_UNDEFINED	USB charger is not connected or detection
+ *                              process is not yet started.
+ * USB_CHG_STATE_WAIT_FOR_DCD	Waiting for Data pins contact.
+ * USB_CHG_STATE_DCD_DONE	Data pin contact is detected.
+ * USB_CHG_STATE_PRIMARY_DONE	Primary detection is completed (Detects
+ *                              between SDP and DCP/CDP).
+ * USB_CHG_STATE_SECONDARY_DONE	Secondary detection is completed (Detects
+ *                              between DCP and CDP).
+ * USB_CHG_STATE_DETECTED	USB charger type is determined.
+ *
+ */
+enum usb_chg_state {
+	USB_CHG_STATE_UNDEFINED = 0,
+	USB_CHG_STATE_WAIT_FOR_DCD,
+	USB_CHG_STATE_DCD_DONE,
+	USB_CHG_STATE_PRIMARY_DONE,
+	USB_CHG_STATE_SECONDARY_DONE,
+	USB_CHG_STATE_DETECTED,
+};
+
+/**
+ * USB charger types
+ *
+ * USB_INVALID_CHARGER	Invalid USB charger.
+ * USB_SDP_CHARGER	Standard downstream port. Refers to a downstream port
+ *                      on USB2.0 compliant host/hub.
+ * USB_DCP_CHARGER	Dedicated charger port (AC charger/ Wall charger).
+ * USB_CDP_CHARGER	Charging downstream port. Enumeration can happen and
+ *                      IDEV_CHG_MAX can be drawn irrespective of USB state.
+ *
+ */
+enum usb_chg_type {
+	USB_INVALID_CHARGER = 0,
+	USB_SDP_CHARGER,
+	USB_DCP_CHARGER,
+	USB_CDP_CHARGER,
+};
+
+/**
+ * struct msm_otg_platform_data - platform device data
+ *              for msm_otg driver.
+ * @phy_init_seq: PHY configuration sequence. val, reg pairs
+ *              terminated by -1.
+ * @vbus_power: VBUS power on/off routine.
+ * @power_budget: VBUS power budget in mA (0 will be treated as 500mA).
+ * @mode: Supported mode (OTG/peripheral/host).
+ * @otg_control: OTG switch controlled by user/Id pin
+ * @default_mode: Default operational mode. Applicable only if
+ *              OTG switch is controller by user.
+ * @pclk_src_name: pclk is derived from ebi1_usb_clk in case of 7x27 and 8k
+ *              dfab_usb_hs_clk in case of 8660 and 8960.
+ */
+struct msm_otg_platform_data {
+	int *phy_init_seq;
+	void (*vbus_power)(bool on);
+	unsigned power_budget;
+	enum usb_mode_type mode;
+	enum otg_control_type otg_control;
+	enum usb_mode_type default_mode;
+	enum msm_usb_phy_type phy_type;
+	void (*setup_gpio)(enum usb_otg_state state);
+	char *pclk_src_name;
+};
+
+/**
+ * struct msm_otg: OTG driver data. Shared by HCD and DCD.
+ * @otg: USB OTG Transceiver structure.
+ * @pdata: otg device platform data.
+ * @irq: IRQ number assigned for HSUSB controller.
+ * @clk: clock struct of usb_hs_clk.
+ * @pclk: clock struct of usb_hs_pclk.
+ * @pclk_src: pclk source for voting.
+ * @phy_reset_clk: clock struct of usb_phy_clk.
+ * @core_clk: clock struct of usb_hs_core_clk.
+ * @regs: ioremapped register base address.
+ * @inputs: OTG state machine inputs(Id, SessValid etc).
+ * @sm_work: OTG state machine work.
+ * @in_lpm: indicates low power mode (LPM) state.
+ * @async_int: Async interrupt arrived.
+ * @cur_power: The amount of mA available from downstream port.
+ * @chg_work: Charger detection work.
+ * @chg_state: The state of charger detection process.
+ * @chg_type: The type of charger attached.
+ * @dcd_retires: The retry count used to track Data contact
+ *               detection process.
+ */
+struct msm_otg {
+	struct usb_phy phy;
+	struct msm_otg_platform_data *pdata;
+	int irq;
+	struct clk *clk;
+	struct clk *pclk;
+	struct clk *pclk_src;
+	struct clk *phy_reset_clk;
+	struct clk *core_clk;
+	void __iomem *regs;
+#define ID		0
+#define B_SESS_VLD	1
+	unsigned long inputs;
+	struct work_struct sm_work;
+	atomic_t in_lpm;
+	int async_int;
+	unsigned cur_power;
+	struct delayed_work chg_work;
+	enum usb_chg_state chg_state;
+	enum usb_chg_type chg_type;
+	u8 dcd_retries;
+};
+
+#endif
diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h
new file mode 100644
index 00000000..6e97a2d3
--- /dev/null
+++ b/include/linux/usb/msm_hsusb_hw.h
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __LINUX_USB_GADGET_MSM72K_UDC_H__
+#define __LINUX_USB_GADGET_MSM72K_UDC_H__
+
+#define USB_AHBBURST         (MSM_USB_BASE + 0x0090)
+#define USB_AHBMODE          (MSM_USB_BASE + 0x0098)
+#define USB_CAPLENGTH        (MSM_USB_BASE + 0x0100) /* 8 bit */
+
+#define USB_USBCMD           (MSM_USB_BASE + 0x0140)
+#define USB_PORTSC           (MSM_USB_BASE + 0x0184)
+#define USB_OTGSC            (MSM_USB_BASE + 0x01A4)
+#define USB_USBMODE          (MSM_USB_BASE + 0x01A8)
+#define USB_PHY_CTRL         (MSM_USB_BASE + 0x0240)
+
+#define USBCMD_RESET   2
+#define USB_USBINTR          (MSM_USB_BASE + 0x0148)
+
+#define PORTSC_PHCD            (1 << 23) /* phy suspend mode */
+#define PORTSC_PTS_MASK         (3 << 30)
+#define PORTSC_PTS_ULPI         (3 << 30)
+
+#define USB_ULPI_VIEWPORT    (MSM_USB_BASE + 0x0170)
+#define ULPI_RUN              (1 << 30)
+#define ULPI_WRITE            (1 << 29)
+#define ULPI_READ             (0 << 29)
+#define ULPI_ADDR(n)          (((n) & 255) << 16)
+#define ULPI_DATA(n)          ((n) & 255)
+#define ULPI_DATA_READ(n)     (((n) >> 8) & 255)
+
+#define ASYNC_INTR_CTRL         (1 << 29) /* Enable async interrupt */
+#define ULPI_STP_CTRL           (1 << 30) /* Block communication with PHY */
+#define PHY_RETEN               (1 << 1) /* PHY retention enable/disable */
+
+/* OTG definitions */
+#define OTGSC_INTSTS_MASK	(0x7f << 16)
+#define OTGSC_ID		(1 << 8)
+#define OTGSC_BSV		(1 << 11)
+#define OTGSC_IDIS		(1 << 16)
+#define OTGSC_BSVIS		(1 << 19)
+#define OTGSC_IDIE		(1 << 24)
+#define OTGSC_BSVIE		(1 << 27)
+
+#endif /* __LINUX_USB_GADGET_MSM72K_UDC_H__ */
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
new file mode 100644
index 00000000..eb505250
--- /dev/null
+++ b/include/linux/usb/musb.h
@@ -0,0 +1,152 @@
+/*
+ * This is used to for host and peripheral modes of the driver for
+ * Inventra (Multidrop) Highspeed Dual-Role Controllers:  (M)HDRC.
+ *
+ * Board initialization should put one of these into dev->platform_data,
+ * probably on some platform_device named "musb-hdrc".  It encapsulates
+ * key configuration differences between boards.
+ */
+
+#ifndef __LINUX_USB_MUSB_H
+#define __LINUX_USB_MUSB_H
+
+/* The USB role is defined by the connector used on the board, so long as
+ * standards are being followed.  (Developer boards sometimes won't.)
+ */
+enum musb_mode {
+	MUSB_UNDEFINED = 0,
+	MUSB_HOST,		/* A or Mini-A connector */
+	MUSB_PERIPHERAL,	/* B or Mini-B connector */
+	MUSB_OTG		/* Mini-AB connector */
+};
+
+struct clk;
+
+enum musb_fifo_style {
+	FIFO_RXTX,
+	FIFO_TX,
+	FIFO_RX
+} __attribute__ ((packed));
+
+enum musb_buf_mode {
+	BUF_SINGLE,
+	BUF_DOUBLE
+} __attribute__ ((packed));
+
+struct musb_fifo_cfg {
+	u8			hw_ep_num;
+	enum musb_fifo_style	style;
+	enum musb_buf_mode	mode;
+	u16			maxpacket;
+};
+
+#define MUSB_EP_FIFO(ep, st, m, pkt)		\
+{						\
+	.hw_ep_num	= ep,			\
+	.style		= st,			\
+	.mode		= m,			\
+	.maxpacket	= pkt,			\
+}
+
+#define MUSB_EP_FIFO_SINGLE(ep, st, pkt)	\
+	MUSB_EP_FIFO(ep, st, BUF_SINGLE, pkt)
+
+#define MUSB_EP_FIFO_DOUBLE(ep, st, pkt)	\
+	MUSB_EP_FIFO(ep, st, BUF_DOUBLE, pkt)
+
+struct musb_hdrc_eps_bits {
+	const char	name[16];
+	u8		bits;
+};
+
+struct musb_hdrc_config {
+	struct musb_fifo_cfg	*fifo_cfg;	/* board fifo configuration */
+	unsigned		fifo_cfg_size;	/* size of the fifo configuration */
+
+	/* MUSB configuration-specific details */
+	unsigned	multipoint:1;	/* multipoint device */
+	unsigned	dyn_fifo:1 __deprecated; /* supports dynamic fifo sizing */
+	unsigned	soft_con:1 __deprecated; /* soft connect required */
+	unsigned	utm_16:1 __deprecated; /* utm data witdh is 16 bits */
+	unsigned	big_endian:1;	/* true if CPU uses big-endian */
+	unsigned	mult_bulk_tx:1;	/* Tx ep required for multbulk pkts */
+	unsigned	mult_bulk_rx:1;	/* Rx ep required for multbulk pkts */
+	unsigned	high_iso_tx:1;	/* Tx ep required for HB iso */
+	unsigned	high_iso_rx:1;	/* Rx ep required for HD iso */
+	unsigned	dma:1 __deprecated; /* supports DMA */
+	unsigned	vendor_req:1 __deprecated; /* vendor registers required */
+
+	u8		num_eps;	/* number of endpoints _with_ ep0 */
+	u8		dma_channels __deprecated; /* number of dma channels */
+	u8		dyn_fifo_size;	/* dynamic size in bytes */
+	u8		vendor_ctrl __deprecated; /* vendor control reg width */
+	u8		vendor_stat __deprecated; /* vendor status reg witdh */
+	u8		dma_req_chan __deprecated; /* bitmask for required dma channels */
+	u8		ram_bits;	/* ram address size */
+
+	struct musb_hdrc_eps_bits *eps_bits __deprecated;
+#ifdef CONFIG_BLACKFIN
+	/* A GPIO controlling VRSEL in Blackfin */
+	unsigned int	gpio_vrsel;
+	unsigned int	gpio_vrsel_active;
+	/* musb CLKIN in Blackfin in MHZ */
+	unsigned char   clkin;
+#endif
+
+};
+
+struct musb_hdrc_platform_data {
+	/* MUSB_HOST, MUSB_PERIPHERAL, or MUSB_OTG */
+	u8		mode;
+
+	/* for clk_get() */
+	const char	*clock;
+
+	/* (HOST or OTG) switch VBUS on/off */
+	int		(*set_vbus)(struct device *dev, int is_on);
+
+	/* (HOST or OTG) mA/2 power supplied on (default = 8mA) */
+	u8		power;
+
+	/* (PERIPHERAL) mA/2 max power consumed (default = 100mA) */
+	u8		min_power;
+
+	/* (HOST or OTG) msec/2 after VBUS on till power good */
+	u8		potpgt;
+
+	/* (HOST or OTG) program PHY for external Vbus */
+	unsigned	extvbus:1;
+
+	/* Power the device on or off */
+	int		(*set_power)(int state);
+
+	/* MUSB configuration-specific details */
+	struct musb_hdrc_config	*config;
+
+	/* Architecture specific board data	*/
+	void		*board_data;
+
+	/* Platform specific struct musb_ops pointer */
+	const void	*platform_ops;
+};
+
+
+/* TUSB 6010 support */
+
+#define	TUSB6010_OSCCLK_60	16667	/* psec/clk @ 60.0 MHz */
+#define	TUSB6010_REFCLK_24	41667	/* psec/clk @ 24.0 MHz XI */
+#define	TUSB6010_REFCLK_19	52083	/* psec/clk @ 19.2 MHz CLKIN */
+
+#ifdef	CONFIG_ARCH_OMAP2
+
+extern int __init tusb6010_setup_interface(
+		struct musb_hdrc_platform_data *data,
+		unsigned ps_refclk, unsigned waitpin,
+		unsigned async_cs, unsigned sync_cs,
+		unsigned irq, unsigned dmachan);
+
+extern int tusb6010_platform_retime(unsigned is_refclk);
+
+#endif	/* OMAP2 */
+
+#endif /* __LINUX_USB_MUSB_H */
diff --git a/include/linux/usb/net2280.h b/include/linux/usb/net2280.h
new file mode 100644
index 00000000..148b8fa5
--- /dev/null
+++ b/include/linux/usb/net2280.h
@@ -0,0 +1,443 @@
+/*
+ * NetChip 2280 high/full speed USB device controller.
+ * Unlike many such controllers, this one talks PCI.
+ *
+ * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com)
+ * Copyright (C) 2003 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_USB_NET2280_H
+#define __LINUX_USB_NET2280_H
+
+/*-------------------------------------------------------------------------*/
+
+/* NET2280 MEMORY MAPPED REGISTERS
+ *
+ * The register layout came from the chip documentation, and the bit
+ * number definitions were extracted from chip specification.
+ *
+ * Use the shift operator ('<<') to build bit masks, with readl/writel
+ * to access the registers through PCI.
+ */
+
+/* main registers, BAR0 + 0x0000 */
+struct net2280_regs {
+	/* offset 0x0000 */
+	u32		devinit;
+#define     LOCAL_CLOCK_FREQUENCY                               8
+#define     FORCE_PCI_RESET                                     7
+#define     PCI_ID                                              6
+#define     PCI_ENABLE                                          5
+#define     FIFO_SOFT_RESET                                     4
+#define     CFG_SOFT_RESET                                      3
+#define     PCI_SOFT_RESET                                      2
+#define     USB_SOFT_RESET                                      1
+#define     M8051_RESET                                         0
+	u32		eectl;
+#define     EEPROM_ADDRESS_WIDTH                                23
+#define     EEPROM_CHIP_SELECT_ACTIVE                           22
+#define     EEPROM_PRESENT                                      21
+#define     EEPROM_VALID                                        20
+#define     EEPROM_BUSY                                         19
+#define     EEPROM_CHIP_SELECT_ENABLE                           18
+#define     EEPROM_BYTE_READ_START                              17
+#define     EEPROM_BYTE_WRITE_START                             16
+#define     EEPROM_READ_DATA                                    8
+#define     EEPROM_WRITE_DATA                                   0
+	u32		eeclkfreq;
+	u32		_unused0;
+	/* offset 0x0010 */
+
+	u32		pciirqenb0;		/* interrupt PCI master ... */
+#define     SETUP_PACKET_INTERRUPT_ENABLE                       7
+#define     ENDPOINT_F_INTERRUPT_ENABLE                         6
+#define     ENDPOINT_E_INTERRUPT_ENABLE                         5
+#define     ENDPOINT_D_INTERRUPT_ENABLE                         4
+#define     ENDPOINT_C_INTERRUPT_ENABLE                         3
+#define     ENDPOINT_B_INTERRUPT_ENABLE                         2
+#define     ENDPOINT_A_INTERRUPT_ENABLE                         1
+#define     ENDPOINT_0_INTERRUPT_ENABLE                         0
+	u32		pciirqenb1;
+#define     PCI_INTERRUPT_ENABLE                                31
+#define     POWER_STATE_CHANGE_INTERRUPT_ENABLE                 27
+#define     PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE                26
+#define     PCI_PARITY_ERROR_INTERRUPT_ENABLE                   25
+#define     PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE          20
+#define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE          19
+#define     PCI_TARGET_ABORT_ASSERTED_INTERRUPT_ENABLE          18
+#define     PCI_RETRY_ABORT_INTERRUPT_ENABLE                    17
+#define     PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE              16
+#define     GPIO_INTERRUPT_ENABLE                               13
+#define     DMA_D_INTERRUPT_ENABLE                              12
+#define     DMA_C_INTERRUPT_ENABLE                              11
+#define     DMA_B_INTERRUPT_ENABLE                              10
+#define     DMA_A_INTERRUPT_ENABLE                              9
+#define     EEPROM_DONE_INTERRUPT_ENABLE                        8
+#define     VBUS_INTERRUPT_ENABLE                               7
+#define     CONTROL_STATUS_INTERRUPT_ENABLE                     6
+#define     ROOT_PORT_RESET_INTERRUPT_ENABLE                    4
+#define     SUSPEND_REQUEST_INTERRUPT_ENABLE                    3
+#define     SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE             2
+#define     RESUME_INTERRUPT_ENABLE                             1
+#define     SOF_INTERRUPT_ENABLE                                0
+	u32		cpu_irqenb0;		/* ... or onboard 8051 */
+#define     SETUP_PACKET_INTERRUPT_ENABLE                       7
+#define     ENDPOINT_F_INTERRUPT_ENABLE                         6
+#define     ENDPOINT_E_INTERRUPT_ENABLE                         5
+#define     ENDPOINT_D_INTERRUPT_ENABLE                         4
+#define     ENDPOINT_C_INTERRUPT_ENABLE                         3
+#define     ENDPOINT_B_INTERRUPT_ENABLE                         2
+#define     ENDPOINT_A_INTERRUPT_ENABLE                         1
+#define     ENDPOINT_0_INTERRUPT_ENABLE                         0
+	u32		cpu_irqenb1;
+#define     CPU_INTERRUPT_ENABLE                                31
+#define     POWER_STATE_CHANGE_INTERRUPT_ENABLE                 27
+#define     PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE                26
+#define     PCI_PARITY_ERROR_INTERRUPT_ENABLE                   25
+#define     PCI_INTA_INTERRUPT_ENABLE                           24
+#define     PCI_PME_INTERRUPT_ENABLE                            23
+#define     PCI_SERR_INTERRUPT_ENABLE                           22
+#define     PCI_PERR_INTERRUPT_ENABLE                           21
+#define     PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE          20
+#define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE          19
+#define     PCI_RETRY_ABORT_INTERRUPT_ENABLE                    17
+#define     PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE              16
+#define     GPIO_INTERRUPT_ENABLE                               13
+#define     DMA_D_INTERRUPT_ENABLE                              12
+#define     DMA_C_INTERRUPT_ENABLE                              11
+#define     DMA_B_INTERRUPT_ENABLE                              10
+#define     DMA_A_INTERRUPT_ENABLE                              9
+#define     EEPROM_DONE_INTERRUPT_ENABLE                        8
+#define     VBUS_INTERRUPT_ENABLE                               7
+#define     CONTROL_STATUS_INTERRUPT_ENABLE                     6
+#define     ROOT_PORT_RESET_INTERRUPT_ENABLE                    4
+#define     SUSPEND_REQUEST_INTERRUPT_ENABLE                    3
+#define     SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE             2
+#define     RESUME_INTERRUPT_ENABLE                             1
+#define     SOF_INTERRUPT_ENABLE                                0
+
+	/* offset 0x0020 */
+	u32		_unused1;
+	u32		usbirqenb1;
+#define     USB_INTERRUPT_ENABLE                                31
+#define     POWER_STATE_CHANGE_INTERRUPT_ENABLE                 27
+#define     PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE                26
+#define     PCI_PARITY_ERROR_INTERRUPT_ENABLE                   25
+#define     PCI_INTA_INTERRUPT_ENABLE                           24
+#define     PCI_PME_INTERRUPT_ENABLE                            23
+#define     PCI_SERR_INTERRUPT_ENABLE                           22
+#define     PCI_PERR_INTERRUPT_ENABLE                           21
+#define     PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE          20
+#define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE          19
+#define     PCI_RETRY_ABORT_INTERRUPT_ENABLE                    17
+#define     PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE              16
+#define     GPIO_INTERRUPT_ENABLE                               13
+#define     DMA_D_INTERRUPT_ENABLE                              12
+#define     DMA_C_INTERRUPT_ENABLE                              11
+#define     DMA_B_INTERRUPT_ENABLE                              10
+#define     DMA_A_INTERRUPT_ENABLE                              9
+#define     EEPROM_DONE_INTERRUPT_ENABLE                        8
+#define     VBUS_INTERRUPT_ENABLE                               7
+#define     CONTROL_STATUS_INTERRUPT_ENABLE                     6
+#define     ROOT_PORT_RESET_INTERRUPT_ENABLE                    4
+#define     SUSPEND_REQUEST_INTERRUPT_ENABLE                    3
+#define     SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE             2
+#define     RESUME_INTERRUPT_ENABLE                             1
+#define     SOF_INTERRUPT_ENABLE                                0
+	u32		irqstat0;
+#define     INTA_ASSERTED                                       12
+#define     SETUP_PACKET_INTERRUPT                              7
+#define     ENDPOINT_F_INTERRUPT                                6
+#define     ENDPOINT_E_INTERRUPT                                5
+#define     ENDPOINT_D_INTERRUPT                                4
+#define     ENDPOINT_C_INTERRUPT                                3
+#define     ENDPOINT_B_INTERRUPT                                2
+#define     ENDPOINT_A_INTERRUPT                                1
+#define     ENDPOINT_0_INTERRUPT                                0
+	u32		irqstat1;
+#define     POWER_STATE_CHANGE_INTERRUPT                        27
+#define     PCI_ARBITER_TIMEOUT_INTERRUPT                       26
+#define     PCI_PARITY_ERROR_INTERRUPT                          25
+#define     PCI_INTA_INTERRUPT                                  24
+#define     PCI_PME_INTERRUPT                                   23
+#define     PCI_SERR_INTERRUPT                                  22
+#define     PCI_PERR_INTERRUPT                                  21
+#define     PCI_MASTER_ABORT_RECEIVED_INTERRUPT                 20
+#define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT                 19
+#define     PCI_RETRY_ABORT_INTERRUPT                           17
+#define     PCI_MASTER_CYCLE_DONE_INTERRUPT                     16
+#define     SOF_DOWN_INTERRUPT                                  14
+#define     GPIO_INTERRUPT                                      13
+#define     DMA_D_INTERRUPT                                     12
+#define     DMA_C_INTERRUPT                                     11
+#define     DMA_B_INTERRUPT                                     10
+#define     DMA_A_INTERRUPT                                     9
+#define     EEPROM_DONE_INTERRUPT                               8
+#define     VBUS_INTERRUPT                                      7
+#define     CONTROL_STATUS_INTERRUPT                            6
+#define     ROOT_PORT_RESET_INTERRUPT                           4
+#define     SUSPEND_REQUEST_INTERRUPT                           3
+#define     SUSPEND_REQUEST_CHANGE_INTERRUPT                    2
+#define     RESUME_INTERRUPT                                    1
+#define     SOF_INTERRUPT                                       0
+	/* offset 0x0030 */
+	u32		idxaddr;
+	u32		idxdata;
+	u32		fifoctl;
+#define     PCI_BASE2_RANGE                                     16
+#define     IGNORE_FIFO_AVAILABILITY                            3
+#define     PCI_BASE2_SELECT                                    2
+#define     FIFO_CONFIGURATION_SELECT                           0
+	u32		_unused2;
+	/* offset 0x0040 */
+	u32		memaddr;
+#define     START                                               28
+#define     DIRECTION                                           27
+#define     FIFO_DIAGNOSTIC_SELECT                              24
+#define     MEMORY_ADDRESS                                      0
+	u32		memdata0;
+	u32		memdata1;
+	u32		_unused3;
+	/* offset 0x0050 */
+	u32		gpioctl;
+#define     GPIO3_LED_SELECT                                    12
+#define     GPIO3_INTERRUPT_ENABLE                              11
+#define     GPIO2_INTERRUPT_ENABLE                              10
+#define     GPIO1_INTERRUPT_ENABLE                              9
+#define     GPIO0_INTERRUPT_ENABLE                              8
+#define     GPIO3_OUTPUT_ENABLE                                 7
+#define     GPIO2_OUTPUT_ENABLE                                 6
+#define     GPIO1_OUTPUT_ENABLE                                 5
+#define     GPIO0_OUTPUT_ENABLE                                 4
+#define     GPIO3_DATA                                          3
+#define     GPIO2_DATA                                          2
+#define     GPIO1_DATA                                          1
+#define     GPIO0_DATA                                          0
+	u32		gpiostat;
+#define     GPIO3_INTERRUPT                                     3
+#define     GPIO2_INTERRUPT                                     2
+#define     GPIO1_INTERRUPT                                     1
+#define     GPIO0_INTERRUPT                                     0
+} __attribute__ ((packed));
+
+/* usb control, BAR0 + 0x0080 */
+struct net2280_usb_regs {
+	/* offset 0x0080 */
+	u32		stdrsp;
+#define     STALL_UNSUPPORTED_REQUESTS                          31
+#define     SET_TEST_MODE                                       16
+#define     GET_OTHER_SPEED_CONFIGURATION                       15
+#define     GET_DEVICE_QUALIFIER                                14
+#define     SET_ADDRESS                                         13
+#define     ENDPOINT_SET_CLEAR_HALT                             12
+#define     DEVICE_SET_CLEAR_DEVICE_REMOTE_WAKEUP               11
+#define     GET_STRING_DESCRIPTOR_2                             10
+#define     GET_STRING_DESCRIPTOR_1                             9
+#define     GET_STRING_DESCRIPTOR_0                             8
+#define     GET_SET_INTERFACE                                   6
+#define     GET_SET_CONFIGURATION                               5
+#define     GET_CONFIGURATION_DESCRIPTOR                        4
+#define     GET_DEVICE_DESCRIPTOR                               3
+#define     GET_ENDPOINT_STATUS                                 2
+#define     GET_INTERFACE_STATUS                                1
+#define     GET_DEVICE_STATUS                                   0
+	u32		prodvendid;
+#define     PRODUCT_ID                                          16
+#define     VENDOR_ID                                           0
+	u32		relnum;
+	u32		usbctl;
+#define     SERIAL_NUMBER_INDEX                                 16
+#define     PRODUCT_ID_STRING_ENABLE                            13
+#define     VENDOR_ID_STRING_ENABLE                             12
+#define     USB_ROOT_PORT_WAKEUP_ENABLE                         11
+#define     VBUS_PIN                                            10
+#define     TIMED_DISCONNECT                                    9
+#define     SUSPEND_IMMEDIATELY                                 7
+#define     SELF_POWERED_USB_DEVICE                             6
+#define     REMOTE_WAKEUP_SUPPORT                               5
+#define     PME_POLARITY                                        4
+#define     USB_DETECT_ENABLE                                   3
+#define     PME_WAKEUP_ENABLE                                   2
+#define     DEVICE_REMOTE_WAKEUP_ENABLE                         1
+#define     SELF_POWERED_STATUS                                 0
+	/* offset 0x0090 */
+	u32		usbstat;
+#define     HIGH_SPEED                                          7
+#define     FULL_SPEED                                          6
+#define     GENERATE_RESUME                                     5
+#define     GENERATE_DEVICE_REMOTE_WAKEUP                       4
+	u32		xcvrdiag;
+#define     FORCE_HIGH_SPEED_MODE                               31
+#define     FORCE_FULL_SPEED_MODE                               30
+#define     USB_TEST_MODE                                       24
+#define     LINE_STATE                                          16
+#define     TRANSCEIVER_OPERATION_MODE                          2
+#define     TRANSCEIVER_SELECT                                  1
+#define     TERMINATION_SELECT                                  0
+	u32		setup0123;
+	u32		setup4567;
+	/* offset 0x0090 */
+	u32		_unused0;
+	u32		ouraddr;
+#define     FORCE_IMMEDIATE                                     7
+#define     OUR_USB_ADDRESS                                     0
+	u32		ourconfig;
+} __attribute__ ((packed));
+
+/* pci control, BAR0 + 0x0100 */
+struct net2280_pci_regs {
+	/* offset 0x0100 */
+	u32		 pcimstctl;
+#define     PCI_ARBITER_PARK_SELECT                             13
+#define     PCI_MULTI LEVEL_ARBITER                             12
+#define     PCI_RETRY_ABORT_ENABLE                              11
+#define     DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE              10
+#define     DMA_READ_MULTIPLE_ENABLE                            9
+#define     DMA_READ_LINE_ENABLE                                8
+#define     PCI_MASTER_COMMAND_SELECT                           6
+#define         MEM_READ_OR_WRITE                                   0
+#define         IO_READ_OR_WRITE                                    1
+#define         CFG_READ_OR_WRITE                                   2
+#define     PCI_MASTER_START                                    5
+#define     PCI_MASTER_READ_WRITE                               4
+#define         PCI_MASTER_WRITE                                    0
+#define         PCI_MASTER_READ                                     1
+#define     PCI_MASTER_BYTE_WRITE_ENABLES                       0
+	u32		 pcimstaddr;
+	u32		 pcimstdata;
+	u32		 pcimststat;
+#define     PCI_ARBITER_CLEAR                                   2
+#define     PCI_EXTERNAL_ARBITER                                1
+#define     PCI_HOST_MODE                                       0
+} __attribute__ ((packed));
+
+/* dma control, BAR0 + 0x0180 ... array of four structs like this,
+ * for channels 0..3.  see also struct net2280_dma:  descriptor
+ * that can be loaded into some of these registers.
+ */
+struct net2280_dma_regs {	/* [11.7] */
+	/* offset 0x0180, 0x01a0, 0x01c0, 0x01e0, */
+	u32		dmactl;
+#define     DMA_SCATTER_GATHER_DONE_INTERRUPT_ENABLE            25
+#define     DMA_CLEAR_COUNT_ENABLE                              21
+#define     DESCRIPTOR_POLLING_RATE                             19
+#define         POLL_CONTINUOUS                                     0
+#define         POLL_1_USEC                                         1
+#define         POLL_100_USEC                                       2
+#define         POLL_1_MSEC                                         3
+#define     DMA_VALID_BIT_POLLING_ENABLE                        18
+#define     DMA_VALID_BIT_ENABLE                                17
+#define     DMA_SCATTER_GATHER_ENABLE                           16
+#define     DMA_OUT_AUTO_START_ENABLE                           4
+#define     DMA_PREEMPT_ENABLE                                  3
+#define     DMA_FIFO_VALIDATE                                   2
+#define     DMA_ENABLE                                          1
+#define     DMA_ADDRESS_HOLD                                    0
+	u32		dmastat;
+#define     DMA_ABORT_DONE_INTERRUPT                            27
+#define     DMA_SCATTER_GATHER_DONE_INTERRUPT                   25
+#define     DMA_TRANSACTION_DONE_INTERRUPT                      24
+#define     DMA_ABORT                                           1
+#define     DMA_START                                           0
+	u32		_unused0[2];
+	/* offset 0x0190, 0x01b0, 0x01d0, 0x01f0, */
+	u32		dmacount;
+#define     VALID_BIT                                           31
+#define     DMA_DIRECTION                                       30
+#define     DMA_DONE_INTERRUPT_ENABLE                           29
+#define     END_OF_CHAIN                                        28
+#define         DMA_BYTE_COUNT_MASK                                 ((1<<24)-1)
+#define     DMA_BYTE_COUNT                                      0
+	u32		dmaaddr;
+	u32		dmadesc;
+	u32		_unused1;
+} __attribute__ ((packed));
+
+/* dedicated endpoint registers, BAR0 + 0x0200 */
+
+struct net2280_dep_regs {	/* [11.8] */
+	/* offset 0x0200, 0x0210, 0x220, 0x230, 0x240 */
+	u32		dep_cfg;
+	/* offset 0x0204, 0x0214, 0x224, 0x234, 0x244 */
+	u32		dep_rsp;
+	u32		_unused[2];
+} __attribute__ ((packed));
+
+/* configurable endpoint registers, BAR0 + 0x0300 ... array of seven structs
+ * like this, for ep0 then the configurable endpoints A..F
+ * ep0 reserved for control; E and F have only 64 bytes of fifo
+ */
+struct net2280_ep_regs {	/* [11.9] */
+	/* offset 0x0300, 0x0320, 0x0340, 0x0360, 0x0380, 0x03a0, 0x03c0 */
+	u32		ep_cfg;
+#define     ENDPOINT_BYTE_COUNT                                 16
+#define     ENDPOINT_ENABLE                                     10
+#define     ENDPOINT_TYPE                                       8
+#define     ENDPOINT_DIRECTION                                  7
+#define     ENDPOINT_NUMBER                                     0
+	u32		ep_rsp;
+#define     SET_NAK_OUT_PACKETS                                 15
+#define     SET_EP_HIDE_STATUS_PHASE                            14
+#define     SET_EP_FORCE_CRC_ERROR                              13
+#define     SET_INTERRUPT_MODE                                  12
+#define     SET_CONTROL_STATUS_PHASE_HANDSHAKE                  11
+#define     SET_NAK_OUT_PACKETS_MODE                            10
+#define     SET_ENDPOINT_TOGGLE                                 9
+#define     SET_ENDPOINT_HALT                                   8
+#define     CLEAR_NAK_OUT_PACKETS                               7
+#define     CLEAR_EP_HIDE_STATUS_PHASE                          6
+#define     CLEAR_EP_FORCE_CRC_ERROR                            5
+#define     CLEAR_INTERRUPT_MODE                                4
+#define     CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE                3
+#define     CLEAR_NAK_OUT_PACKETS_MODE                          2
+#define     CLEAR_ENDPOINT_TOGGLE                               1
+#define     CLEAR_ENDPOINT_HALT                                 0
+	u32		ep_irqenb;
+#define     SHORT_PACKET_OUT_DONE_INTERRUPT_ENABLE              6
+#define     SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE           5
+#define     DATA_PACKET_RECEIVED_INTERRUPT_ENABLE               3
+#define     DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE            2
+#define     DATA_OUT_PING_TOKEN_INTERRUPT_ENABLE                1
+#define     DATA_IN_TOKEN_INTERRUPT_ENABLE                      0
+	u32		ep_stat;
+#define     FIFO_VALID_COUNT                                    24
+#define     HIGH_BANDWIDTH_OUT_TRANSACTION_PID                  22
+#define     TIMEOUT                                             21
+#define     USB_STALL_SENT                                      20
+#define     USB_IN_NAK_SENT                                     19
+#define     USB_IN_ACK_RCVD                                     18
+#define     USB_OUT_PING_NAK_SENT                               17
+#define     USB_OUT_ACK_SENT                                    16
+#define     FIFO_OVERFLOW                                       13
+#define     FIFO_UNDERFLOW                                      12
+#define     FIFO_FULL                                           11
+#define     FIFO_EMPTY                                          10
+#define     FIFO_FLUSH                                          9
+#define     SHORT_PACKET_OUT_DONE_INTERRUPT                     6
+#define     SHORT_PACKET_TRANSFERRED_INTERRUPT                  5
+#define     NAK_OUT_PACKETS                                     4
+#define     DATA_PACKET_RECEIVED_INTERRUPT                      3
+#define     DATA_PACKET_TRANSMITTED_INTERRUPT                   2
+#define     DATA_OUT_PING_TOKEN_INTERRUPT                       1
+#define     DATA_IN_TOKEN_INTERRUPT                             0
+	/* offset 0x0310, 0x0330, 0x0350, 0x0370, 0x0390, 0x03b0, 0x03d0 */
+	u32		ep_avail;
+	u32		ep_data;
+	u32		_unused0[2];
+} __attribute__ ((packed));
+
+#endif /* __LINUX_USB_NET2280_H */
diff --git a/include/linux/usb/ohci_pdriver.h b/include/linux/usb/ohci_pdriver.h
new file mode 100644
index 00000000..2808f2a9
--- /dev/null
+++ b/include/linux/usb/ohci_pdriver.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2012 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __USB_CORE_OHCI_PDRIVER_H
+#define __USB_CORE_OHCI_PDRIVER_H
+
+/**
+ * struct usb_ohci_pdata - platform_data for generic ohci driver
+ *
+ * @big_endian_desc:	BE descriptors
+ * @big_endian_mmio:	BE registers
+ * @no_big_frame_no:	no big endian frame_no shift
+ *
+ * These are general configuration options for the OHCI controller. All of
+ * these options are activating more or less workarounds for some hardware.
+ */
+struct usb_ohci_pdata {
+	unsigned	big_endian_desc:1;
+	unsigned	big_endian_mmio:1;
+	unsigned	no_big_frame_no:1;
+};
+
+#endif /* __USB_CORE_OHCI_PDRIVER_H */
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
new file mode 100644
index 00000000..38ab3f46
--- /dev/null
+++ b/include/linux/usb/otg.h
@@ -0,0 +1,279 @@
+/* USB OTG (On The Go) defines */
+/*
+ *
+ * These APIs may be used between USB controllers.  USB device drivers
+ * (for either host or peripheral roles) don't use these calls; they
+ * continue to use just usb_device and usb_gadget.
+ */
+
+#ifndef __LINUX_USB_OTG_H
+#define __LINUX_USB_OTG_H
+
+#include <linux/notifier.h>
+
+/* OTG defines lots of enumeration states before device reset */
+enum usb_otg_state {
+	OTG_STATE_UNDEFINED = 0,
+
+	/* single-role peripheral, and dual-role default-b */
+	OTG_STATE_B_IDLE,
+	OTG_STATE_B_SRP_INIT,
+	OTG_STATE_B_PERIPHERAL,
+
+	/* extra dual-role default-b states */
+	OTG_STATE_B_WAIT_ACON,
+	OTG_STATE_B_HOST,
+
+	/* dual-role default-a */
+	OTG_STATE_A_IDLE,
+	OTG_STATE_A_WAIT_VRISE,
+	OTG_STATE_A_WAIT_BCON,
+	OTG_STATE_A_HOST,
+	OTG_STATE_A_SUSPEND,
+	OTG_STATE_A_PERIPHERAL,
+	OTG_STATE_A_WAIT_VFALL,
+	OTG_STATE_A_VBUS_ERR,
+};
+
+enum usb_phy_events {
+	USB_EVENT_NONE,         /* no events or cable disconnected */
+	USB_EVENT_VBUS,         /* vbus valid event */
+	USB_EVENT_ID,           /* id was grounded */
+	USB_EVENT_CHARGER,      /* usb dedicated charger */
+	USB_EVENT_ENUMERATED,   /* gadget driver enumerated */
+};
+
+struct usb_phy;
+
+/* for transceivers connected thru an ULPI interface, the user must
+ * provide access ops
+ */
+struct usb_phy_io_ops {
+	int (*read)(struct usb_phy *x, u32 reg);
+	int (*write)(struct usb_phy *x, u32 val, u32 reg);
+};
+
+struct usb_otg {
+	u8			default_a;
+
+	struct usb_phy		*phy;
+	struct usb_bus		*host;
+	struct usb_gadget	*gadget;
+
+	/* bind/unbind the host controller */
+	int	(*set_host)(struct usb_otg *otg, struct usb_bus *host);
+
+	/* bind/unbind the peripheral controller */
+	int	(*set_peripheral)(struct usb_otg *otg,
+					struct usb_gadget *gadget);
+
+	/* effective for A-peripheral, ignored for B devices */
+	int	(*set_vbus)(struct usb_otg *otg, bool enabled);
+
+	/* for B devices only:  start session with A-Host */
+	int	(*start_srp)(struct usb_otg *otg);
+
+	/* start or continue HNP role switch */
+	int	(*start_hnp)(struct usb_otg *otg);
+
+};
+
+/*
+ * the otg driver needs to interact with both device side and host side
+ * usb controllers.  it decides which controller is active at a given
+ * moment, using the transceiver, ID signal, HNP and sometimes static
+ * configuration information (including "board isn't wired for otg").
+ */
+struct usb_phy {
+	struct device		*dev;
+	const char		*label;
+	unsigned int		 flags;
+
+	enum usb_otg_state	state;
+	enum usb_phy_events	last_event;
+
+	struct usb_otg		*otg;
+
+	struct device		*io_dev;
+	struct usb_phy_io_ops	*io_ops;
+	void __iomem		*io_priv;
+
+	/* for notification of usb_phy_events */
+	struct atomic_notifier_head	notifier;
+
+	/* to pass extra port status to the root hub */
+	u16			port_status;
+	u16			port_change;
+
+	/* initialize/shutdown the OTG controller */
+	int	(*init)(struct usb_phy *x);
+	void	(*shutdown)(struct usb_phy *x);
+
+	/* effective for B devices, ignored for A-peripheral */
+	int	(*set_power)(struct usb_phy *x,
+				unsigned mA);
+
+	/* for non-OTG B devices: set transceiver into suspend mode */
+	int	(*set_suspend)(struct usb_phy *x,
+				int suspend);
+
+};
+
+
+/* for board-specific init logic */
+extern int usb_set_transceiver(struct usb_phy *);
+
+#if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE))
+/* sometimes transceivers are accessed only through e.g. ULPI */
+extern void usb_nop_xceiv_register(void);
+extern void usb_nop_xceiv_unregister(void);
+#else
+static inline void usb_nop_xceiv_register(void)
+{
+}
+
+static inline void usb_nop_xceiv_unregister(void)
+{
+}
+#endif
+
+/* helpers for direct access thru low-level io interface */
+static inline int usb_phy_io_read(struct usb_phy *x, u32 reg)
+{
+	if (x->io_ops && x->io_ops->read)
+		return x->io_ops->read(x, reg);
+
+	return -EINVAL;
+}
+
+static inline int usb_phy_io_write(struct usb_phy *x, u32 val, u32 reg)
+{
+	if (x->io_ops && x->io_ops->write)
+		return x->io_ops->write(x, val, reg);
+
+	return -EINVAL;
+}
+
+static inline int
+usb_phy_init(struct usb_phy *x)
+{
+	if (x->init)
+		return x->init(x);
+
+	return 0;
+}
+
+static inline void
+usb_phy_shutdown(struct usb_phy *x)
+{
+	if (x->shutdown)
+		x->shutdown(x);
+}
+
+/* for usb host and peripheral controller drivers */
+#ifdef CONFIG_USB_OTG_UTILS
+extern struct usb_phy *usb_get_transceiver(void);
+extern void usb_put_transceiver(struct usb_phy *);
+extern const char *otg_state_string(enum usb_otg_state state);
+#else
+static inline struct usb_phy *usb_get_transceiver(void)
+{
+	return NULL;
+}
+
+static inline void usb_put_transceiver(struct usb_phy *x)
+{
+}
+
+static inline const char *otg_state_string(enum usb_otg_state state)
+{
+	return NULL;
+}
+#endif
+
+/* Context: can sleep */
+static inline int
+otg_start_hnp(struct usb_otg *otg)
+{
+	if (otg && otg->start_hnp)
+		return otg->start_hnp(otg);
+
+	return -ENOTSUPP;
+}
+
+/* Context: can sleep */
+static inline int
+otg_set_vbus(struct usb_otg *otg, bool enabled)
+{
+	if (otg && otg->set_vbus)
+		return otg->set_vbus(otg, enabled);
+
+	return -ENOTSUPP;
+}
+
+/* for HCDs */
+static inline int
+otg_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+	if (otg && otg->set_host)
+		return otg->set_host(otg, host);
+
+	return -ENOTSUPP;
+}
+
+/* for usb peripheral controller drivers */
+
+/* Context: can sleep */
+static inline int
+otg_set_peripheral(struct usb_otg *otg, struct usb_gadget *periph)
+{
+	if (otg && otg->set_peripheral)
+		return otg->set_peripheral(otg, periph);
+
+	return -ENOTSUPP;
+}
+
+static inline int
+usb_phy_set_power(struct usb_phy *x, unsigned mA)
+{
+	if (x && x->set_power)
+		return x->set_power(x, mA);
+	return 0;
+}
+
+/* Context: can sleep */
+static inline int
+usb_phy_set_suspend(struct usb_phy *x, int suspend)
+{
+	if (x->set_suspend != NULL)
+		return x->set_suspend(x, suspend);
+	else
+		return 0;
+}
+
+static inline int
+otg_start_srp(struct usb_otg *otg)
+{
+	if (otg && otg->start_srp)
+		return otg->start_srp(otg);
+
+	return -ENOTSUPP;
+}
+
+/* notifiers */
+static inline int
+usb_register_notifier(struct usb_phy *x, struct notifier_block *nb)
+{
+	return atomic_notifier_chain_register(&x->notifier, nb);
+}
+
+static inline void
+usb_unregister_notifier(struct usb_phy *x, struct notifier_block *nb)
+{
+	atomic_notifier_chain_unregister(&x->notifier, nb);
+}
+
+/* for OTG controller drivers (and maybe other stuff) */
+extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
+
+#endif /* __LINUX_USB_OTG_H */
diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h
new file mode 100644
index 00000000..3e93de7e
--- /dev/null
+++ b/include/linux/usb/quirks.h
@@ -0,0 +1,33 @@
+/*
+ * This file holds the definitions of quirks found in USB devices.
+ * Only quirks that affect the whole device, not an interface,
+ * belong here.
+ */
+
+#ifndef __LINUX_USB_QUIRKS_H
+#define __LINUX_USB_QUIRKS_H
+
+/* string descriptors must not be fetched using a 255-byte read */
+#define USB_QUIRK_STRING_FETCH_255	0x00000001
+
+/* device can't resume correctly so reset it instead */
+#define USB_QUIRK_RESET_RESUME		0x00000002
+
+/* device can't handle Set-Interface requests */
+#define USB_QUIRK_NO_SET_INTF		0x00000004
+
+/* device can't handle its Configuration or Interface strings */
+#define USB_QUIRK_CONFIG_INTF_STRINGS	0x00000008
+
+/*device will morph if reset, don't use reset for handling errors */
+#define USB_QUIRK_RESET_MORPHS		0x00000010
+
+/* device has more interface descriptions than the bNumInterfaces count,
+   and can't handle talking to these interfaces */
+#define USB_QUIRK_HONOR_BNUMINTERFACES	0x00000020
+
+/* device needs a pause during initialization, after we read the device
+   descriptor */
+#define USB_QUIRK_DELAY_INIT		0x00000040
+
+#endif /* __LINUX_USB_QUIRKS_H */
diff --git a/include/linux/usb/r8a66597.h b/include/linux/usb/r8a66597.h
new file mode 100644
index 00000000..55805f9d
--- /dev/null
+++ b/include/linux/usb/r8a66597.h
@@ -0,0 +1,481 @@
+/*
+ * R8A66597 driver platform data
+ *
+ * Copyright (C) 2009  Renesas Solutions Corp.
+ *
+ * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifndef __LINUX_USB_R8A66597_H
+#define __LINUX_USB_R8A66597_H
+
+#define R8A66597_PLATDATA_XTAL_12MHZ	0x01
+#define R8A66597_PLATDATA_XTAL_24MHZ	0x02
+#define R8A66597_PLATDATA_XTAL_48MHZ	0x03
+
+struct r8a66597_platdata {
+	/* This callback can control port power instead of DVSTCTR register. */
+	void (*port_power)(int port, int power);
+
+	/* This parameter is for BUSWAIT */
+	u16		buswait;
+
+	/* set one = on chip controller, set zero = external controller */
+	unsigned	on_chip:1;
+
+	/* (external controller only) set R8A66597_PLATDATA_XTAL_nnMHZ */
+	unsigned	xtal:2;
+
+	/* set one = 3.3V, set zero = 1.5V */
+	unsigned	vif:1;
+
+	/* set one = big endian, set zero = little endian */
+	unsigned	endian:1;
+
+	/* (external controller only) set one = WR0_N shorted to WR1_N */
+	unsigned	wr0_shorted_to_wr1:1;
+
+	/* set one = using SUDMAC */
+	unsigned	sudmac:1;
+};
+
+/* Register definitions */
+#define SYSCFG0		0x00
+#define SYSCFG1		0x02
+#define SYSSTS0		0x04
+#define SYSSTS1		0x06
+#define DVSTCTR0	0x08
+#define DVSTCTR1	0x0A
+#define TESTMODE	0x0C
+#define PINCFG		0x0E
+#define DMA0CFG		0x10
+#define DMA1CFG		0x12
+#define CFIFO		0x14
+#define D0FIFO		0x18
+#define D1FIFO		0x1C
+#define CFIFOSEL	0x20
+#define CFIFOCTR	0x22
+#define CFIFOSIE	0x24
+#define D0FIFOSEL	0x28
+#define D0FIFOCTR	0x2A
+#define D1FIFOSEL	0x2C
+#define D1FIFOCTR	0x2E
+#define INTENB0		0x30
+#define INTENB1		0x32
+#define INTENB2		0x34
+#define BRDYENB		0x36
+#define NRDYENB		0x38
+#define BEMPENB		0x3A
+#define SOFCFG		0x3C
+#define INTSTS0		0x40
+#define INTSTS1		0x42
+#define INTSTS2		0x44
+#define BRDYSTS		0x46
+#define NRDYSTS		0x48
+#define BEMPSTS		0x4A
+#define FRMNUM		0x4C
+#define UFRMNUM		0x4E
+#define USBADDR		0x50
+#define USBREQ		0x54
+#define USBVAL		0x56
+#define USBINDX		0x58
+#define USBLENG		0x5A
+#define DCPCFG		0x5C
+#define DCPMAXP		0x5E
+#define DCPCTR		0x60
+#define PIPESEL		0x64
+#define PIPECFG		0x68
+#define PIPEBUF		0x6A
+#define PIPEMAXP	0x6C
+#define PIPEPERI	0x6E
+#define PIPE1CTR	0x70
+#define PIPE2CTR	0x72
+#define PIPE3CTR	0x74
+#define PIPE4CTR	0x76
+#define PIPE5CTR	0x78
+#define PIPE6CTR	0x7A
+#define PIPE7CTR	0x7C
+#define PIPE8CTR	0x7E
+#define PIPE9CTR	0x80
+#define PIPE1TRE	0x90
+#define PIPE1TRN	0x92
+#define PIPE2TRE	0x94
+#define PIPE2TRN	0x96
+#define PIPE3TRE	0x98
+#define PIPE3TRN	0x9A
+#define PIPE4TRE	0x9C
+#define	PIPE4TRN	0x9E
+#define	PIPE5TRE	0xA0
+#define	PIPE5TRN	0xA2
+#define DEVADD0		0xD0
+#define DEVADD1		0xD2
+#define DEVADD2		0xD4
+#define DEVADD3		0xD6
+#define DEVADD4		0xD8
+#define DEVADD5		0xDA
+#define DEVADD6		0xDC
+#define DEVADD7		0xDE
+#define DEVADD8		0xE0
+#define DEVADD9		0xE2
+#define DEVADDA		0xE4
+
+/* System Configuration Control Register */
+#define	XTAL		0xC000	/* b15-14: Crystal selection */
+#define	  XTAL48	 0x8000	  /* 48MHz */
+#define	  XTAL24	 0x4000	  /* 24MHz */
+#define	  XTAL12	 0x0000	  /* 12MHz */
+#define	XCKE		0x2000	/* b13: External clock enable */
+#define	PLLC		0x0800	/* b11: PLL control */
+#define	SCKE		0x0400	/* b10: USB clock enable */
+#define	PCSDIS		0x0200	/* b9: not CS wakeup */
+#define	LPSME		0x0100	/* b8: Low power sleep mode */
+#define	HSE		0x0080	/* b7: Hi-speed enable */
+#define	DCFM		0x0040	/* b6: Controller function select  */
+#define	DRPD		0x0020	/* b5: D+/- pull down control */
+#define	DPRPU		0x0010	/* b4: D+ pull up control */
+#define	USBE		0x0001	/* b0: USB module operation enable */
+
+/* System Configuration Status Register */
+#define	OVCBIT		0x8000	/* b15-14: Over-current bit */
+#define	OVCMON		0xC000	/* b15-14: Over-current monitor */
+#define	SOFEA		0x0020	/* b5: SOF monitor */
+#define	IDMON		0x0004	/* b3: ID-pin monitor */
+#define	LNST		0x0003	/* b1-0: D+, D- line status */
+#define	  SE1		 0x0003	  /* SE1 */
+#define	  FS_KSTS	 0x0002	  /* Full-Speed K State */
+#define	  FS_JSTS	 0x0001	  /* Full-Speed J State */
+#define	  LS_JSTS	 0x0002	  /* Low-Speed J State */
+#define	  LS_KSTS	 0x0001	  /* Low-Speed K State */
+#define	  SE0		 0x0000	  /* SE0 */
+
+/* Device State Control Register */
+#define	EXTLP0		0x0400	/* b10: External port */
+#define	VBOUT		0x0200	/* b9: VBUS output */
+#define	WKUP		0x0100	/* b8: Remote wakeup */
+#define	RWUPE		0x0080	/* b7: Remote wakeup sense */
+#define	USBRST		0x0040	/* b6: USB reset enable */
+#define	RESUME		0x0020	/* b5: Resume enable */
+#define	UACT		0x0010	/* b4: USB bus enable */
+#define	RHST		0x0007	/* b1-0: Reset handshake status */
+#define	  HSPROC	 0x0004	  /* HS handshake is processing */
+#define	  HSMODE	 0x0003	  /* Hi-Speed mode */
+#define	  FSMODE	 0x0002	  /* Full-Speed mode */
+#define	  LSMODE	 0x0001	  /* Low-Speed mode */
+#define	  UNDECID	 0x0000	  /* Undecided */
+
+/* Test Mode Register */
+#define	UTST			0x000F	/* b3-0: Test select */
+#define	  H_TST_PACKET		 0x000C	  /* HOST TEST Packet */
+#define	  H_TST_SE0_NAK		 0x000B	  /* HOST TEST SE0 NAK */
+#define	  H_TST_K		 0x000A	  /* HOST TEST K */
+#define	  H_TST_J		 0x0009	  /* HOST TEST J */
+#define	  H_TST_NORMAL		 0x0000	  /* HOST Normal Mode */
+#define	  P_TST_PACKET		 0x0004	  /* PERI TEST Packet */
+#define	  P_TST_SE0_NAK		 0x0003	  /* PERI TEST SE0 NAK */
+#define	  P_TST_K		 0x0002	  /* PERI TEST K */
+#define	  P_TST_J		 0x0001	  /* PERI TEST J */
+#define	  P_TST_NORMAL		 0x0000	  /* PERI Normal Mode */
+
+/* Data Pin Configuration Register */
+#define	LDRV			0x8000	/* b15: Drive Current Adjust */
+#define	  VIF1			  0x0000		/* VIF = 1.8V */
+#define	  VIF3			  0x8000		/* VIF = 3.3V */
+#define	INTA			0x0001	/* b1: USB INT-pin active */
+
+/* DMAx Pin Configuration Register */
+#define	DREQA			0x4000	/* b14: Dreq active select */
+#define	BURST			0x2000	/* b13: Burst mode */
+#define	DACKA			0x0400	/* b10: Dack active select */
+#define	DFORM			0x0380	/* b9-7: DMA mode select */
+#define	  CPU_ADR_RD_WR		 0x0000	  /* Address + RD/WR mode (CPU bus) */
+#define	  CPU_DACK_RD_WR	 0x0100	  /* DACK + RD/WR mode (CPU bus) */
+#define	  CPU_DACK_ONLY		 0x0180	  /* DACK only mode (CPU bus) */
+#define	  SPLIT_DACK_ONLY	 0x0200	  /* DACK only mode (SPLIT bus) */
+#define	DENDA			0x0040	/* b6: Dend active select */
+#define	PKTM			0x0020	/* b5: Packet mode */
+#define	DENDE			0x0010	/* b4: Dend enable */
+#define	OBUS			0x0004	/* b2: OUTbus mode */
+
+/* CFIFO/DxFIFO Port Select Register */
+#define	RCNT		0x8000	/* b15: Read count mode */
+#define	REW		0x4000	/* b14: Buffer rewind */
+#define	DCLRM		0x2000	/* b13: DMA buffer clear mode */
+#define	DREQE		0x1000	/* b12: DREQ output enable */
+#define	  MBW_8		 0x0000	  /*  8bit */
+#define	  MBW_16	 0x0400	  /* 16bit */
+#define	  MBW_32	 0x0800   /* 32bit */
+#define	BIGEND		0x0100	/* b8: Big endian mode */
+#define	  BYTE_LITTLE	 0x0000		/* little dendian */
+#define	  BYTE_BIG	 0x0100		/* big endifan */
+#define	ISEL		0x0020	/* b5: DCP FIFO port direction select */
+#define	CURPIPE		0x000F	/* b2-0: PIPE select */
+
+/* CFIFO/DxFIFO Port Control Register */
+#define	BVAL		0x8000	/* b15: Buffer valid flag */
+#define	BCLR		0x4000	/* b14: Buffer clear */
+#define	FRDY		0x2000	/* b13: FIFO ready */
+#define	DTLN		0x0FFF	/* b11-0: FIFO received data length */
+
+/* Interrupt Enable Register 0 */
+#define	VBSE	0x8000	/* b15: VBUS interrupt */
+#define	RSME	0x4000	/* b14: Resume interrupt */
+#define	SOFE	0x2000	/* b13: Frame update interrupt */
+#define	DVSE	0x1000	/* b12: Device state transition interrupt */
+#define	CTRE	0x0800	/* b11: Control transfer stage transition interrupt */
+#define	BEMPE	0x0400	/* b10: Buffer empty interrupt */
+#define	NRDYE	0x0200	/* b9: Buffer not ready interrupt */
+#define	BRDYE	0x0100	/* b8: Buffer ready interrupt */
+
+/* Interrupt Enable Register 1 */
+#define	OVRCRE		0x8000	/* b15: Over-current interrupt */
+#define	BCHGE		0x4000	/* b14: USB us chenge interrupt */
+#define	DTCHE		0x1000	/* b12: Detach sense interrupt */
+#define	ATTCHE		0x0800	/* b11: Attach sense interrupt */
+#define	EOFERRE		0x0040	/* b6: EOF error interrupt */
+#define	SIGNE		0x0020	/* b5: SETUP IGNORE interrupt */
+#define	SACKE		0x0010	/* b4: SETUP ACK interrupt */
+
+/* BRDY Interrupt Enable/Status Register */
+#define	BRDY9		0x0200	/* b9: PIPE9 */
+#define	BRDY8		0x0100	/* b8: PIPE8 */
+#define	BRDY7		0x0080	/* b7: PIPE7 */
+#define	BRDY6		0x0040	/* b6: PIPE6 */
+#define	BRDY5		0x0020	/* b5: PIPE5 */
+#define	BRDY4		0x0010	/* b4: PIPE4 */
+#define	BRDY3		0x0008	/* b3: PIPE3 */
+#define	BRDY2		0x0004	/* b2: PIPE2 */
+#define	BRDY1		0x0002	/* b1: PIPE1 */
+#define	BRDY0		0x0001	/* b1: PIPE0 */
+
+/* NRDY Interrupt Enable/Status Register */
+#define	NRDY9		0x0200	/* b9: PIPE9 */
+#define	NRDY8		0x0100	/* b8: PIPE8 */
+#define	NRDY7		0x0080	/* b7: PIPE7 */
+#define	NRDY6		0x0040	/* b6: PIPE6 */
+#define	NRDY5		0x0020	/* b5: PIPE5 */
+#define	NRDY4		0x0010	/* b4: PIPE4 */
+#define	NRDY3		0x0008	/* b3: PIPE3 */
+#define	NRDY2		0x0004	/* b2: PIPE2 */
+#define	NRDY1		0x0002	/* b1: PIPE1 */
+#define	NRDY0		0x0001	/* b1: PIPE0 */
+
+/* BEMP Interrupt Enable/Status Register */
+#define	BEMP9		0x0200	/* b9: PIPE9 */
+#define	BEMP8		0x0100	/* b8: PIPE8 */
+#define	BEMP7		0x0080	/* b7: PIPE7 */
+#define	BEMP6		0x0040	/* b6: PIPE6 */
+#define	BEMP5		0x0020	/* b5: PIPE5 */
+#define	BEMP4		0x0010	/* b4: PIPE4 */
+#define	BEMP3		0x0008	/* b3: PIPE3 */
+#define	BEMP2		0x0004	/* b2: PIPE2 */
+#define	BEMP1		0x0002	/* b1: PIPE1 */
+#define	BEMP0		0x0001	/* b0: PIPE0 */
+
+/* SOF Pin Configuration Register */
+#define	TRNENSEL	0x0100	/* b8: Select transaction enable period */
+#define	BRDYM		0x0040	/* b6: BRDY clear timing */
+#define	INTL		0x0020	/* b5: Interrupt sense select */
+#define	EDGESTS		0x0010	/* b4:  */
+#define	SOFMODE		0x000C	/* b3-2: SOF pin select */
+#define	  SOF_125US	 0x0008	  /* SOF OUT 125us Frame Signal */
+#define	  SOF_1MS	 0x0004	  /* SOF OUT 1ms Frame Signal */
+#define	  SOF_DISABLE	 0x0000	  /* SOF OUT Disable */
+
+/* Interrupt Status Register 0 */
+#define	VBINT	0x8000	/* b15: VBUS interrupt */
+#define	RESM	0x4000	/* b14: Resume interrupt */
+#define	SOFR	0x2000	/* b13: SOF frame update interrupt */
+#define	DVST	0x1000	/* b12: Device state transition interrupt */
+#define	CTRT	0x0800	/* b11: Control transfer stage transition interrupt */
+#define	BEMP	0x0400	/* b10: Buffer empty interrupt */
+#define	NRDY	0x0200	/* b9: Buffer not ready interrupt */
+#define	BRDY	0x0100	/* b8: Buffer ready interrupt */
+#define	VBSTS	0x0080	/* b7: VBUS input port */
+#define	DVSQ	0x0070	/* b6-4: Device state */
+#define	  DS_SPD_CNFG	 0x0070	  /* Suspend Configured */
+#define	  DS_SPD_ADDR	 0x0060	  /* Suspend Address */
+#define	  DS_SPD_DFLT	 0x0050	  /* Suspend Default */
+#define	  DS_SPD_POWR	 0x0040	  /* Suspend Powered */
+#define	  DS_SUSP	 0x0040	  /* Suspend */
+#define	  DS_CNFG	 0x0030	  /* Configured */
+#define	  DS_ADDS	 0x0020	  /* Address */
+#define	  DS_DFLT	 0x0010	  /* Default */
+#define	  DS_POWR	 0x0000	  /* Powered */
+#define	DVSQS		0x0030	/* b5-4: Device state */
+#define	VALID		0x0008	/* b3: Setup packet detected flag */
+#define	CTSQ		0x0007	/* b2-0: Control transfer stage */
+#define	  CS_SQER	 0x0006	  /* Sequence error */
+#define	  CS_WRND	 0x0005	  /* Control write nodata status stage */
+#define	  CS_WRSS	 0x0004	  /* Control write status stage */
+#define	  CS_WRDS	 0x0003	  /* Control write data stage */
+#define	  CS_RDSS	 0x0002	  /* Control read status stage */
+#define	  CS_RDDS	 0x0001	  /* Control read data stage */
+#define	  CS_IDST	 0x0000	  /* Idle or setup stage */
+
+/* Interrupt Status Register 1 */
+#define	OVRCR		0x8000	/* b15: Over-current interrupt */
+#define	BCHG		0x4000	/* b14: USB bus chenge interrupt */
+#define	DTCH		0x1000	/* b12: Detach sense interrupt */
+#define	ATTCH		0x0800	/* b11: Attach sense interrupt */
+#define	EOFERR		0x0040	/* b6: EOF-error interrupt */
+#define	SIGN		0x0020	/* b5: Setup ignore interrupt */
+#define	SACK		0x0010	/* b4: Setup acknowledge interrupt */
+
+/* Frame Number Register */
+#define	OVRN		0x8000	/* b15: Overrun error */
+#define	CRCE		0x4000	/* b14: Received data error */
+#define	FRNM		0x07FF	/* b10-0: Frame number */
+
+/* Micro Frame Number Register */
+#define	UFRNM		0x0007	/* b2-0: Micro frame number */
+
+/* Default Control Pipe Maxpacket Size Register */
+/* Pipe Maxpacket Size Register */
+#define	DEVSEL	0xF000	/* b15-14: Device address select */
+#define	MAXP	0x007F	/* b6-0: Maxpacket size of default control pipe */
+
+/* Default Control Pipe Control Register */
+#define	BSTS		0x8000	/* b15: Buffer status */
+#define	SUREQ		0x4000	/* b14: Send USB request  */
+#define	CSCLR		0x2000	/* b13: complete-split status clear */
+#define	CSSTS		0x1000	/* b12: complete-split status */
+#define	SUREQCLR	0x0800	/* b11: stop setup request */
+#define	SQCLR		0x0100	/* b8: Sequence toggle bit clear */
+#define	SQSET		0x0080	/* b7: Sequence toggle bit set */
+#define	SQMON		0x0040	/* b6: Sequence toggle bit monitor */
+#define	PBUSY		0x0020	/* b5: pipe busy */
+#define	PINGE		0x0010	/* b4: ping enable */
+#define	CCPL		0x0004	/* b2: Enable control transfer complete */
+#define	PID		0x0003	/* b1-0: Response PID */
+#define	  PID_STALL11	 0x0003	  /* STALL */
+#define	  PID_STALL	 0x0002	  /* STALL */
+#define	  PID_BUF	 0x0001	  /* BUF */
+#define	  PID_NAK	 0x0000	  /* NAK */
+
+/* Pipe Window Select Register */
+#define	PIPENM		0x0007	/* b2-0: Pipe select */
+
+/* Pipe Configuration Register */
+#define	R8A66597_TYP	0xC000	/* b15-14: Transfer type */
+#define	  R8A66597_ISO	 0xC000		  /* Isochronous */
+#define	  R8A66597_INT	 0x8000		  /* Interrupt */
+#define	  R8A66597_BULK	 0x4000		  /* Bulk */
+#define	R8A66597_BFRE	0x0400	/* b10: Buffer ready interrupt mode select */
+#define	R8A66597_DBLB	0x0200	/* b9: Double buffer mode select */
+#define	R8A66597_CNTMD	0x0100	/* b8: Continuous transfer mode select */
+#define	R8A66597_SHTNAK	0x0080	/* b7: Transfer end NAK */
+#define	R8A66597_DIR	0x0010	/* b4: Transfer direction select */
+#define	R8A66597_EPNUM	0x000F	/* b3-0: Eendpoint number select */
+
+/* Pipe Buffer Configuration Register */
+#define	BUFSIZE		0x7C00	/* b14-10: Pipe buffer size */
+#define	BUFNMB		0x007F	/* b6-0: Pipe buffer number */
+#define	PIPE0BUF	256
+#define	PIPExBUF	64
+
+/* Pipe Maxpacket Size Register */
+#define	MXPS		0x07FF	/* b10-0: Maxpacket size */
+
+/* Pipe Cycle Configuration Register */
+#define	IFIS	0x1000	/* b12: Isochronous in-buffer flush mode select */
+#define	IITV	0x0007	/* b2-0: Isochronous interval */
+
+/* Pipex Control Register */
+#define	BSTS	0x8000	/* b15: Buffer status */
+#define	INBUFM	0x4000	/* b14: IN buffer monitor (Only for PIPE1 to 5) */
+#define	CSCLR	0x2000	/* b13: complete-split status clear */
+#define	CSSTS	0x1000	/* b12: complete-split status */
+#define	ATREPM	0x0400	/* b10: Auto repeat mode */
+#define	ACLRM	0x0200	/* b9: Out buffer auto clear mode */
+#define	SQCLR	0x0100	/* b8: Sequence toggle bit clear */
+#define	SQSET	0x0080	/* b7: Sequence toggle bit set */
+#define	SQMON	0x0040	/* b6: Sequence toggle bit monitor */
+#define	PBUSY	0x0020	/* b5: pipe busy */
+#define	PID	0x0003	/* b1-0: Response PID */
+
+/* PIPExTRE */
+#define	TRENB		0x0200	/* b9: Transaction counter enable */
+#define	TRCLR		0x0100	/* b8: Transaction counter clear */
+
+/* PIPExTRN */
+#define	TRNCNT		0xFFFF	/* b15-0: Transaction counter */
+
+/* DEVADDx */
+#define	UPPHUB		0x7800
+#define	HUBPORT		0x0700
+#define	USBSPD		0x00C0
+#define	RTPORT		0x0001
+
+/* SUDMAC registers */
+#define CH0CFG		0x00
+#define CH1CFG		0x04
+#define CH0BA		0x10
+#define CH1BA		0x14
+#define CH0BBC		0x18
+#define CH1BBC		0x1C
+#define CH0CA		0x20
+#define CH1CA		0x24
+#define CH0CBC		0x28
+#define CH1CBC		0x2C
+#define CH0DEN		0x30
+#define CH1DEN		0x34
+#define DSTSCLR		0x38
+#define DBUFCTRL	0x3C
+#define DINTCTRL	0x40
+#define DINTSTS		0x44
+#define DINTSTSCLR	0x48
+#define CH0SHCTRL	0x50
+#define CH1SHCTRL	0x54
+
+/* SUDMAC Configuration Registers */
+#define SENDBUFM	0x1000 /* b12: Transmit Buffer Mode */
+#define RCVENDM		0x0100 /* b8: Receive Data Transfer End Mode */
+#define LBA_WAIT	0x0030 /* b5-4: Local Bus Access Wait */
+
+/* DMA Enable Registers */
+#define DEN		0x0001 /* b1: DMA Transfer Enable */
+
+/* DMA Status Clear Register */
+#define CH1STCLR	0x0002 /* b2: Ch1 DMA Status Clear */
+#define CH0STCLR	0x0001 /* b1: Ch0 DMA Status Clear */
+
+/* DMA Buffer Control Register */
+#define CH1BUFW		0x0200 /* b9: Ch1 DMA Buffer Data Transfer Enable */
+#define CH0BUFW		0x0100 /* b8: Ch0 DMA Buffer Data Transfer Enable */
+#define CH1BUFS		0x0002 /* b2: Ch1 DMA Buffer Data Status */
+#define CH0BUFS		0x0001 /* b1: Ch0 DMA Buffer Data Status */
+
+/* DMA Interrupt Control Register */
+#define CH1ERRE		0x0200 /* b9: Ch1 SHwy Res Err Detect Int Enable */
+#define CH0ERRE		0x0100 /* b8: Ch0 SHwy Res Err Detect Int Enable */
+#define CH1ENDE		0x0002 /* b2: Ch1 DMA Transfer End Int Enable */
+#define CH0ENDE		0x0001 /* b1: Ch0 DMA Transfer End Int Enable */
+
+/* DMA Interrupt Status Register */
+#define CH1ERRS		0x0200 /* b9: Ch1 SHwy Res Err Detect Int Status */
+#define CH0ERRS		0x0100 /* b8: Ch0 SHwy Res Err Detect Int Status */
+#define CH1ENDS		0x0002 /* b2: Ch1 DMA Transfer End Int Status */
+#define CH0ENDS		0x0001 /* b1: Ch0 DMA Transfer End Int Status */
+
+/* DMA Interrupt Status Clear Register */
+#define CH1ERRC		0x0200 /* b9: Ch1 SHwy Res Err Detect Int Stat Clear */
+#define CH0ERRC		0x0100 /* b8: Ch0 SHwy Res Err Detect Int Stat Clear */
+#define CH1ENDC		0x0002 /* b2: Ch1 DMA Transfer End Int Stat Clear */
+#define CH0ENDC		0x0001 /* b1: Ch0 DMA Transfer End Int Stat Clear */
+
+#endif /* __LINUX_USB_R8A66597_H */
+
diff --git a/include/linux/usb/rawbulk.h b/include/linux/usb/rawbulk.h
new file mode 100755
index 00000000..05a22b10
--- /dev/null
+++ b/include/linux/usb/rawbulk.h
@@ -0,0 +1,166 @@
+/*
+ * Rawbulk Driver from VIA Telecom
+ *
+ * Copyright (C) 2011 VIA Telecom, Inc.
+ * Author: Karfield Chen (kfchen@via-telecom.com)
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __RAWBULK_H__
+#define __RAWBULK_H__
+
+#include <linux/usb.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/composite.h>
+#include <linux/usb/gadget.h>
+#include <linux/wakelock.h>
+#include <linux/device.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+
+#define INTF_DESC       0
+#define BULKIN_DESC     1
+#define BULKOUT_DESC    2
+#define MAX_DESC_ARRAY  4
+
+#define NAME_BUFFSIZE   64
+#define MAX_ATTRIBUTES    10
+
+#define MAX_TTY_RX          4
+#define MAX_TTY_RX_PACKAGE  512
+#define MAX_TTY_TX          8
+#define MAX_TTY_TX_PACKAGE  64
+
+struct rawbulk_function {
+    int transfer_id;
+    const char *longname;
+    const char *shortname;
+    struct device *dev;
+
+    /* Controls */
+    spinlock_t lock;
+    int enable: 1;
+    int activated: 1; /* set when usb enabled */
+    int tty_opened: 1;
+
+    struct work_struct activator; /* asynic transaction starter */
+
+    struct wake_lock keep_awake;
+
+    /* USB Gadget related */
+    struct usb_function function;
+    struct usb_composite_dev *cdev;
+    struct usb_ep *bulk_out, *bulk_in;
+
+    int rts_state;          /* Handshaking pins (outputs) */
+    int dtr_state;
+    int cts_state;                   /* Handshaking pins (inputs) */
+    int dsr_state;
+    int dcd_state;
+    int ri_state;
+
+    /* TTY related */
+    struct tty_struct *tty;
+    int tty_minor;
+    struct tty_port port;
+    spinlock_t tx_lock;
+    struct list_head tx_free;
+    struct list_head tx_inproc;
+    spinlock_t rx_lock;
+    struct list_head rx_free;
+    struct list_head rx_inproc;
+    struct list_head rx_throttled;
+    unsigned int last_pushed;
+
+    /* Transfer Controls */
+    int nups;
+    int ndowns;
+    int upsz;
+    int downsz;
+    int splitsz;
+    int autoreconn;
+    int pushable;   /* Set to use push-way for upstream */
+
+    /* Descriptors and Strings */
+    struct usb_descriptor_header *fs_descs[MAX_DESC_ARRAY];
+    struct usb_descriptor_header *hs_descs[MAX_DESC_ARRAY];
+    struct usb_string string_defs[2];
+    struct usb_gadget_strings string_table;
+    struct usb_gadget_strings *strings[2];
+    struct usb_interface_descriptor interface;
+    struct usb_endpoint_descriptor fs_bulkin_endpoint;
+    struct usb_endpoint_descriptor hs_bulkin_endpoint;
+    struct usb_endpoint_descriptor fs_bulkout_endpoint;
+    struct usb_endpoint_descriptor hs_bulkout_endpoint;
+
+    /* Sysfs Accesses */
+    int max_attrs;
+    struct device_attribute attr[MAX_ATTRIBUTES];
+};
+
+enum transfer_id {
+    RAWBULK_TID_MODEM,
+    RAWBULK_TID_ETS,
+    RAWBULK_TID_AT,
+    RAWBULK_TID_PCV,
+    RAWBULK_TID_GPS,
+    _MAX_TID
+};
+
+#define RAWBULK_INCEPT_FLAG_ENABLE          0x01
+#define RAWBULK_INCEPT_FLAG_PUSH_WAY        0x02
+typedef int (*rawbulk_intercept_t)(struct usb_interface *interface, unsigned int flags);
+typedef void (*rawbulk_autoreconn_callback_t)(int transfer_id);
+
+struct rawbulk_function *rawbulk_lookup_function(int transfer_id);
+
+/* rawbulk tty io */
+int rawbulk_register_tty(struct rawbulk_function *fn);
+void rawbulk_unregister_tty(struct rawbulk_function *fn);
+
+int rawbulk_tty_stop_io(struct rawbulk_function *fn);
+int rawbulk_tty_start_io(struct rawbulk_function *fn);
+int rawbulk_tty_alloc_request(struct rawbulk_function *fn);
+void rawbulk_tty_free_request(struct rawbulk_function *fn);
+
+/* bind/unbind for gadget */
+int rawbulk_bind_function(int transfer_id, struct usb_function *function,
+        struct usb_ep *bulk_out, struct usb_ep *bulk_in,
+        rawbulk_autoreconn_callback_t autoreconn_callback);
+void rawbulk_unbind_function(int trasfer_id);
+int rawbulk_check_enable(struct rawbulk_function *fn);
+void rawbulk_disable_function(struct rawbulk_function *fn);
+
+/* bind/unbind host interfaces */
+int rawbulk_bind_host_interface(struct usb_interface *interface,
+        rawbulk_intercept_t inceptor);
+void rawbulk_unbind_host_interface(struct usb_interface *interface);
+
+/* operations for transactions */
+int rawbulk_start_transactions(int transfer_id, int nups, int ndowns,
+        int upsz, int downsz, int splitsz, int pushable);
+void rawbulk_stop_transactions(int transfer_id);
+int rawbulk_halt_transactions(int transfer_id);
+int rawbulk_resume_transactions(int transfer_id);
+
+int rawbulk_suspend_host_interface(int transfer_id, pm_message_t message);
+int rawbulk_resume_host_interface(int transfer_id);
+int rawbulk_push_upstream_buffer(int transfer_id, const void *buffer,
+        unsigned int length);
+
+int rawbulk_forward_ctrlrequest(const struct usb_ctrlrequest *ctrl);
+
+/* statics and state */
+int rawbulk_transfer_statistics(int transfer_id, char *buf);
+int rawbulk_transfer_state(int transfer_id);
+
+#endif /* __RAWBULK_HEADER_FILE__ */
diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h
new file mode 100644
index 00000000..547e59cc
--- /dev/null
+++ b/include/linux/usb/renesas_usbhs.h
@@ -0,0 +1,196 @@
+/*
+ * Renesas USB
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+#ifndef RENESAS_USB_H
+#define RENESAS_USB_H
+#include <linux/platform_device.h>
+#include <linux/usb/ch9.h>
+
+/*
+ * module type
+ *
+ * it will be return value from get_id
+ */
+enum {
+	USBHS_HOST = 0,
+	USBHS_GADGET,
+	USBHS_MAX,
+};
+
+/*
+ * callback functions table for driver
+ *
+ * These functions are called from platform for driver.
+ * Callback function's pointer will be set before
+ * renesas_usbhs_platform_callback :: hardware_init was called
+ */
+struct renesas_usbhs_driver_callback {
+	int (*notify_hotplug)(struct platform_device *pdev);
+};
+
+/*
+ * callback functions for platform
+ *
+ * These functions are called from driver for platform
+ */
+struct renesas_usbhs_platform_callback {
+
+	/*
+	 * option:
+	 *
+	 * Hardware init function for platform.
+	 * it is called when driver was probed.
+	 */
+	int (*hardware_init)(struct platform_device *pdev);
+
+	/*
+	 * option:
+	 *
+	 * Hardware exit function for platform.
+	 * it is called when driver was removed
+	 */
+	void (*hardware_exit)(struct platform_device *pdev);
+
+	/*
+	 * option:
+	 *
+	 * for board specific clock control
+	 */
+	void (*power_ctrl)(struct platform_device *pdev,
+			   void __iomem *base, int enable);
+
+	/*
+	 * option:
+	 *
+	 * Phy reset for platform
+	 */
+	void (*phy_reset)(struct platform_device *pdev);
+
+	/*
+	 * get USB ID function
+	 *  - USBHS_HOST
+	 *  - USBHS_GADGET
+	 */
+	int (*get_id)(struct platform_device *pdev);
+
+	/*
+	 * get VBUS status function.
+	 */
+	int (*get_vbus)(struct platform_device *pdev);
+
+	/*
+	 * option:
+	 *
+	 * VBUS control is needed for Host
+	 */
+	int (*set_vbus)(struct platform_device *pdev, int enable);
+};
+
+/*
+ * parameters for renesas usbhs
+ *
+ * some register needs USB chip specific parameters.
+ * This struct show it to driver
+ */
+struct renesas_usbhs_driver_param {
+	/*
+	 * pipe settings
+	 */
+	u32 *pipe_type; /* array of USB_ENDPOINT_XFER_xxx (from ep0) */
+	int pipe_size; /* pipe_type array size */
+
+	/*
+	 * option:
+	 *
+	 * for BUSWAIT :: BWAIT
+	 * see
+	 *	renesas_usbhs/common.c :: usbhsc_set_buswait()
+	 * */
+	int buswait_bwait;
+
+	/*
+	 * option:
+	 *
+	 * delay time from notify_hotplug callback
+	 */
+	int detection_delay; /* msec */
+
+	/*
+	 * option:
+	 *
+	 * dma id for dmaengine
+	 */
+	int d0_tx_id;
+	int d0_rx_id;
+	int d1_tx_id;
+	int d1_rx_id;
+
+	/*
+	 * option:
+	 *
+	 * pio <--> dma border.
+	 */
+	int pio_dma_border; /* default is 64byte */
+
+	/*
+	 * option:
+	 */
+	u32 has_otg:1; /* for controlling PWEN/EXTLP */
+	u32 has_sudmac:1; /* for SUDMAC */
+};
+
+/*
+ * option:
+ *
+ * platform information for renesas_usbhs driver.
+ */
+struct renesas_usbhs_platform_info {
+	/*
+	 * option:
+	 *
+	 * platform set these functions before
+	 * call platform_add_devices if needed
+	 */
+	struct renesas_usbhs_platform_callback	platform_callback;
+
+	/*
+	 * driver set these callback functions pointer.
+	 * platform can use it on callback functions
+	 */
+	struct renesas_usbhs_driver_callback	driver_callback;
+
+	/*
+	 * option:
+	 *
+	 * driver use these param for some register
+	 */
+	struct renesas_usbhs_driver_param	driver_param;
+};
+
+/*
+ * macro for platform
+ */
+#define renesas_usbhs_get_info(pdev)\
+	((struct renesas_usbhs_platform_info *)(pdev)->dev.platform_data)
+
+#define renesas_usbhs_call_notify_hotplug(pdev)				\
+	({								\
+		struct renesas_usbhs_driver_callback *dc;		\
+		dc = &(renesas_usbhs_get_info(pdev)->driver_callback);	\
+		if (dc && dc->notify_hotplug)				\
+			dc->notify_hotplug(pdev);			\
+	})
+#endif /* RENESAS_USB_H */
diff --git a/include/linux/usb/rndis_host.h b/include/linux/usb/rndis_host.h
new file mode 100644
index 00000000..88fceb71
--- /dev/null
+++ b/include/linux/usb/rndis_host.h
@@ -0,0 +1,272 @@
+/*
+ * Host Side support for RNDIS Networking Links
+ * Copyright (C) 2005 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef	__LINUX_USB_RNDIS_HOST_H
+#define	__LINUX_USB_RNDIS_HOST_H
+
+/*
+ * CONTROL uses CDC "encapsulated commands" with funky notifications.
+ *  - control-out:  SEND_ENCAPSULATED
+ *  - interrupt-in:  RESPONSE_AVAILABLE
+ *  - control-in:  GET_ENCAPSULATED
+ *
+ * We'll try to ignore the RESPONSE_AVAILABLE notifications.
+ *
+ * REVISIT some RNDIS implementations seem to have curious issues still
+ * to be resolved.
+ */
+struct rndis_msg_hdr {
+	__le32	msg_type;			/* RNDIS_MSG_* */
+	__le32	msg_len;
+	/* followed by data that varies between messages */
+	__le32	request_id;
+	__le32	status;
+	/* ... and more */
+} __attribute__ ((packed));
+
+/* MS-Windows uses this strange size, but RNDIS spec says 1024 minimum */
+#define	CONTROL_BUFFER_SIZE		1025
+
+/* RNDIS defines an (absurdly huge) 10 second control timeout,
+ * but ActiveSync seems to use a more usual 5 second timeout
+ * (which matches the USB 2.0 spec).
+ */
+#define	RNDIS_CONTROL_TIMEOUT_MS	(5 * 1000)
+
+#define RNDIS_MSG_COMPLETION	cpu_to_le32(0x80000000)
+
+/* codes for "msg_type" field of rndis messages;
+ * only the data channel uses packet messages (maybe batched);
+ * everything else goes on the control channel.
+ */
+#define RNDIS_MSG_PACKET	cpu_to_le32(0x00000001)	/* 1-N packets */
+#define RNDIS_MSG_INIT		cpu_to_le32(0x00000002)
+#define RNDIS_MSG_INIT_C	(RNDIS_MSG_INIT|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_HALT		cpu_to_le32(0x00000003)
+#define RNDIS_MSG_QUERY		cpu_to_le32(0x00000004)
+#define RNDIS_MSG_QUERY_C	(RNDIS_MSG_QUERY|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_SET		cpu_to_le32(0x00000005)
+#define RNDIS_MSG_SET_C		(RNDIS_MSG_SET|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_RESET		cpu_to_le32(0x00000006)
+#define RNDIS_MSG_RESET_C	(RNDIS_MSG_RESET|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_INDICATE	cpu_to_le32(0x00000007)
+#define RNDIS_MSG_KEEPALIVE	cpu_to_le32(0x00000008)
+#define RNDIS_MSG_KEEPALIVE_C	(RNDIS_MSG_KEEPALIVE|RNDIS_MSG_COMPLETION)
+
+/* codes for "status" field of completion messages */
+#define	RNDIS_STATUS_SUCCESS			cpu_to_le32(0x00000000)
+#define	RNDIS_STATUS_FAILURE			cpu_to_le32(0xc0000001)
+#define	RNDIS_STATUS_INVALID_DATA		cpu_to_le32(0xc0010015)
+#define	RNDIS_STATUS_NOT_SUPPORTED		cpu_to_le32(0xc00000bb)
+#define	RNDIS_STATUS_MEDIA_CONNECT		cpu_to_le32(0x4001000b)
+#define	RNDIS_STATUS_MEDIA_DISCONNECT		cpu_to_le32(0x4001000c)
+#define	RNDIS_STATUS_MEDIA_SPECIFIC_INDICATION	cpu_to_le32(0x40010012)
+
+/* codes for OID_GEN_PHYSICAL_MEDIUM */
+#define	RNDIS_PHYSICAL_MEDIUM_UNSPECIFIED	cpu_to_le32(0x00000000)
+#define	RNDIS_PHYSICAL_MEDIUM_WIRELESS_LAN	cpu_to_le32(0x00000001)
+#define	RNDIS_PHYSICAL_MEDIUM_CABLE_MODEM	cpu_to_le32(0x00000002)
+#define	RNDIS_PHYSICAL_MEDIUM_PHONE_LINE	cpu_to_le32(0x00000003)
+#define	RNDIS_PHYSICAL_MEDIUM_POWER_LINE	cpu_to_le32(0x00000004)
+#define	RNDIS_PHYSICAL_MEDIUM_DSL		cpu_to_le32(0x00000005)
+#define	RNDIS_PHYSICAL_MEDIUM_FIBRE_CHANNEL	cpu_to_le32(0x00000006)
+#define	RNDIS_PHYSICAL_MEDIUM_1394		cpu_to_le32(0x00000007)
+#define	RNDIS_PHYSICAL_MEDIUM_WIRELESS_WAN	cpu_to_le32(0x00000008)
+#define	RNDIS_PHYSICAL_MEDIUM_MAX		cpu_to_le32(0x00000009)
+
+struct rndis_data_hdr {
+	__le32	msg_type;		/* RNDIS_MSG_PACKET */
+	__le32	msg_len;		/* rndis_data_hdr + data_len + pad */
+	__le32	data_offset;		/* 36 -- right after header */
+	__le32	data_len;		/* ... real packet size */
+
+	__le32	oob_data_offset;	/* zero */
+	__le32	oob_data_len;		/* zero */
+	__le32	num_oob;		/* zero */
+	__le32	packet_data_offset;	/* zero */
+
+	__le32	packet_data_len;	/* zero */
+	__le32	vc_handle;		/* zero */
+	__le32	reserved;		/* zero */
+} __attribute__ ((packed));
+
+struct rndis_init {		/* OUT */
+	/* header and: */
+	__le32	msg_type;			/* RNDIS_MSG_INIT */
+	__le32	msg_len;			/* 24 */
+	__le32	request_id;
+	__le32	major_version;			/* of rndis (1.0) */
+	__le32	minor_version;
+	__le32	max_transfer_size;
+} __attribute__ ((packed));
+
+struct rndis_init_c {		/* IN */
+	/* header and: */
+	__le32	msg_type;			/* RNDIS_MSG_INIT_C */
+	__le32	msg_len;
+	__le32	request_id;
+	__le32	status;
+	__le32	major_version;			/* of rndis (1.0) */
+	__le32	minor_version;
+	__le32	device_flags;
+	__le32	medium;				/* zero == 802.3 */
+	__le32	max_packets_per_message;
+	__le32	max_transfer_size;
+	__le32	packet_alignment;		/* max 7; (1<<n) bytes */
+	__le32	af_list_offset;			/* zero */
+	__le32	af_list_size;			/* zero */
+} __attribute__ ((packed));
+
+struct rndis_halt {		/* OUT (no reply) */
+	/* header and: */
+	__le32	msg_type;			/* RNDIS_MSG_HALT */
+	__le32	msg_len;
+	__le32	request_id;
+} __attribute__ ((packed));
+
+struct rndis_query {		/* OUT */
+	/* header and: */
+	__le32	msg_type;			/* RNDIS_MSG_QUERY */
+	__le32	msg_len;
+	__le32	request_id;
+	__le32	oid;
+	__le32	len;
+	__le32	offset;
+/*?*/	__le32	handle;				/* zero */
+} __attribute__ ((packed));
+
+struct rndis_query_c {		/* IN */
+	/* header and: */
+	__le32	msg_type;			/* RNDIS_MSG_QUERY_C */
+	__le32	msg_len;
+	__le32	request_id;
+	__le32	status;
+	__le32	len;
+	__le32	offset;
+} __attribute__ ((packed));
+
+struct rndis_set {		/* OUT */
+	/* header and: */
+	__le32	msg_type;			/* RNDIS_MSG_SET */
+	__le32	msg_len;
+	__le32	request_id;
+	__le32	oid;
+	__le32	len;
+	__le32	offset;
+/*?*/	__le32	handle;				/* zero */
+} __attribute__ ((packed));
+
+struct rndis_set_c {		/* IN */
+	/* header and: */
+	__le32	msg_type;			/* RNDIS_MSG_SET_C */
+	__le32	msg_len;
+	__le32	request_id;
+	__le32	status;
+} __attribute__ ((packed));
+
+struct rndis_reset {		/* IN */
+	/* header and: */
+	__le32	msg_type;			/* RNDIS_MSG_RESET */
+	__le32	msg_len;
+	__le32	reserved;
+} __attribute__ ((packed));
+
+struct rndis_reset_c {		/* OUT */
+	/* header and: */
+	__le32	msg_type;			/* RNDIS_MSG_RESET_C */
+	__le32	msg_len;
+	__le32	status;
+	__le32	addressing_lost;
+} __attribute__ ((packed));
+
+struct rndis_indicate {		/* IN (unrequested) */
+	/* header and: */
+	__le32	msg_type;			/* RNDIS_MSG_INDICATE */
+	__le32	msg_len;
+	__le32	status;
+	__le32	length;
+	__le32	offset;
+/**/	__le32	diag_status;
+	__le32	error_offset;
+/**/	__le32	message;
+} __attribute__ ((packed));
+
+struct rndis_keepalive {	/* OUT (optionally IN) */
+	/* header and: */
+	__le32	msg_type;			/* RNDIS_MSG_KEEPALIVE */
+	__le32	msg_len;
+	__le32	request_id;
+} __attribute__ ((packed));
+
+struct rndis_keepalive_c {	/* IN (optionally OUT) */
+	/* header and: */
+	__le32	msg_type;			/* RNDIS_MSG_KEEPALIVE_C */
+	__le32	msg_len;
+	__le32	request_id;
+	__le32	status;
+} __attribute__ ((packed));
+
+/* NOTE:  about 30 OIDs are "mandatory" for peripherals to support ... and
+ * there are gobs more that may optionally be supported.  We'll avoid as much
+ * of that mess as possible.
+ */
+#define OID_802_3_PERMANENT_ADDRESS	cpu_to_le32(0x01010101)
+#define OID_GEN_MAXIMUM_FRAME_SIZE	cpu_to_le32(0x00010106)
+#define OID_GEN_CURRENT_PACKET_FILTER	cpu_to_le32(0x0001010e)
+#define OID_GEN_PHYSICAL_MEDIUM		cpu_to_le32(0x00010202)
+
+/* packet filter bits used by OID_GEN_CURRENT_PACKET_FILTER */
+#define RNDIS_PACKET_TYPE_DIRECTED		cpu_to_le32(0x00000001)
+#define RNDIS_PACKET_TYPE_MULTICAST		cpu_to_le32(0x00000002)
+#define RNDIS_PACKET_TYPE_ALL_MULTICAST		cpu_to_le32(0x00000004)
+#define RNDIS_PACKET_TYPE_BROADCAST		cpu_to_le32(0x00000008)
+#define RNDIS_PACKET_TYPE_SOURCE_ROUTING	cpu_to_le32(0x00000010)
+#define RNDIS_PACKET_TYPE_PROMISCUOUS		cpu_to_le32(0x00000020)
+#define RNDIS_PACKET_TYPE_SMT			cpu_to_le32(0x00000040)
+#define RNDIS_PACKET_TYPE_ALL_LOCAL		cpu_to_le32(0x00000080)
+#define RNDIS_PACKET_TYPE_GROUP			cpu_to_le32(0x00001000)
+#define RNDIS_PACKET_TYPE_ALL_FUNCTIONAL	cpu_to_le32(0x00002000)
+#define RNDIS_PACKET_TYPE_FUNCTIONAL		cpu_to_le32(0x00004000)
+#define RNDIS_PACKET_TYPE_MAC_FRAME		cpu_to_le32(0x00008000)
+
+/* default filter used with RNDIS devices */
+#define RNDIS_DEFAULT_FILTER ( \
+	RNDIS_PACKET_TYPE_DIRECTED | \
+	RNDIS_PACKET_TYPE_BROADCAST | \
+	RNDIS_PACKET_TYPE_ALL_MULTICAST | \
+	RNDIS_PACKET_TYPE_PROMISCUOUS)
+
+/* Flags to require specific physical medium type for generic_rndis_bind() */
+#define FLAG_RNDIS_PHYM_NOT_WIRELESS	0x0001
+#define FLAG_RNDIS_PHYM_WIRELESS	0x0002
+
+/* Flags for driver_info::data */
+#define RNDIS_DRIVER_DATA_POLL_STATUS	1	/* poll status before control */
+
+extern void rndis_status(struct usbnet *dev, struct urb *urb);
+extern int
+rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf, int buflen);
+extern int
+generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags);
+extern void rndis_unbind(struct usbnet *dev, struct usb_interface *intf);
+extern int rndis_rx_fixup(struct usbnet *dev, struct sk_buff *skb);
+extern struct sk_buff *
+rndis_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags);
+
+#endif	/* __LINUX_USB_RNDIS_HOST_H */
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
new file mode 100644
index 00000000..47428388
--- /dev/null
+++ b/include/linux/usb/serial.h
@@ -0,0 +1,417 @@
+/*
+ * USB Serial Converter stuff
+ *
+ *	Copyright (C) 1999 - 2005
+ *	    Greg Kroah-Hartman (greg@kroah.com)
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; version 2 of the License.
+ *
+ */
+
+#ifndef __LINUX_USB_SERIAL_H
+#define __LINUX_USB_SERIAL_H
+
+#include <linux/kref.h>
+#include <linux/mutex.h>
+#include <linux/sysrq.h>
+#include <linux/kfifo.h>
+
+#define SERIAL_TTY_MAJOR	188	/* Nice legal number now */
+#define SERIAL_TTY_MINORS	254	/* loads of devices :) */
+#define SERIAL_TTY_NO_MINOR	255	/* No minor was assigned */
+
+/* The maximum number of ports one device can grab at once */
+#define MAX_NUM_PORTS		8
+
+/* parity check flag */
+#define RELEVANT_IFLAG(iflag)	(iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+
+/* USB serial flags */
+#define USB_SERIAL_WRITE_BUSY	0
+
+/**
+ * usb_serial_port: structure for the specific ports of a device.
+ * @serial: pointer back to the struct usb_serial owner of this port.
+ * @port: pointer to the corresponding tty_port for this port.
+ * @lock: spinlock to grab when updating portions of this structure.
+ * @number: the number of the port (the minor number).
+ * @interrupt_in_buffer: pointer to the interrupt in buffer for this port.
+ * @interrupt_in_urb: pointer to the interrupt in struct urb for this port.
+ * @interrupt_in_endpointAddress: endpoint address for the interrupt in pipe
+ *	for this port.
+ * @interrupt_out_buffer: pointer to the interrupt out buffer for this port.
+ * @interrupt_out_size: the size of the interrupt_out_buffer, in bytes.
+ * @interrupt_out_urb: pointer to the interrupt out struct urb for this port.
+ * @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe
+ *	for this port.
+ * @bulk_in_buffer: pointer to the bulk in buffer for this port.
+ * @bulk_in_size: the size of the bulk_in_buffer, in bytes.
+ * @read_urb: pointer to the bulk in struct urb for this port.
+ * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this
+ *	port.
+ * @bulk_in_buffers: pointers to the bulk in buffers for this port
+ * @read_urbs: pointers to the bulk in urbs for this port
+ * @read_urbs_free: status bitmap the for bulk in urbs
+ * @bulk_out_buffer: pointer to the bulk out buffer for this port.
+ * @bulk_out_size: the size of the bulk_out_buffer, in bytes.
+ * @write_urb: pointer to the bulk out struct urb for this port.
+ * @write_fifo: kfifo used to buffer outgoing data
+ * @bulk_out_buffers: pointers to the bulk out buffers for this port
+ * @write_urbs: pointers to the bulk out urbs for this port
+ * @write_urbs_free: status bitmap the for bulk out urbs
+ * @tx_bytes: number of bytes currently in host stack queues
+ * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this
+ *	port.
+ * @flags: usb serial port flags
+ * @write_wait: a wait_queue_head_t used by the port.
+ * @work: work queue entry for the line discipline waking up.
+ * @throttled: nonzero if the read urb is inactive to throttle the device
+ * @throttle_req: nonzero if the tty wants to throttle us
+ * @dev: pointer to the serial device
+ *
+ * This structure is used by the usb-serial core and drivers for the specific
+ * ports of a device.
+ */
+struct usb_serial_port {
+	struct usb_serial	*serial;
+	struct tty_port		port;
+	spinlock_t		lock;
+	unsigned char		number;
+
+	unsigned char		*interrupt_in_buffer;
+	struct urb		*interrupt_in_urb;
+	__u8			interrupt_in_endpointAddress;
+
+	unsigned char		*interrupt_out_buffer;
+	int			interrupt_out_size;
+	struct urb		*interrupt_out_urb;
+	__u8			interrupt_out_endpointAddress;
+
+	unsigned char		*bulk_in_buffer;
+	int			bulk_in_size;
+	struct urb		*read_urb;
+	__u8			bulk_in_endpointAddress;
+
+	unsigned char		*bulk_in_buffers[2];
+	struct urb		*read_urbs[2];
+	unsigned long		read_urbs_free;
+
+	unsigned char		*bulk_out_buffer;
+	int			bulk_out_size;
+	struct urb		*write_urb;
+	struct kfifo		write_fifo;
+
+	unsigned char		*bulk_out_buffers[2];
+	struct urb		*write_urbs[2];
+	unsigned long		write_urbs_free;
+	__u8			bulk_out_endpointAddress;
+
+	int			tx_bytes;
+
+	unsigned long		flags;
+	wait_queue_head_t	write_wait;
+	struct work_struct	work;
+	char			throttled;
+	char			throttle_req;
+	unsigned long		sysrq; /* sysrq timeout */
+	struct device		dev;
+};
+#define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev)
+
+/* get and set the port private data pointer helper functions */
+static inline void *usb_get_serial_port_data(struct usb_serial_port *port)
+{
+	return dev_get_drvdata(&port->dev);
+}
+
+static inline void usb_set_serial_port_data(struct usb_serial_port *port,
+					    void *data)
+{
+	dev_set_drvdata(&port->dev, data);
+}
+
+/**
+ * usb_serial - structure used by the usb-serial core for a device
+ * @dev: pointer to the struct usb_device for this device
+ * @type: pointer to the struct usb_serial_driver for this device
+ * @interface: pointer to the struct usb_interface for this device
+ * @minor: the starting minor number for this device
+ * @num_ports: the number of ports this device has
+ * @num_interrupt_in: number of interrupt in endpoints we have
+ * @num_interrupt_out: number of interrupt out endpoints we have
+ * @num_bulk_in: number of bulk in endpoints we have
+ * @num_bulk_out: number of bulk out endpoints we have
+ * @port: array of struct usb_serial_port structures for the different ports.
+ * @private: place to put any driver specific information that is needed.  The
+ *	usb-serial driver is required to manage this data, the usb-serial core
+ *	will not touch this.  Use usb_get_serial_data() and
+ *	usb_set_serial_data() to access this.
+ */
+struct usb_serial {
+	struct usb_device		*dev;
+	struct usb_serial_driver	*type;
+	struct usb_interface		*interface;
+	unsigned char			disconnected:1;
+	unsigned char			suspending:1;
+	unsigned char			attached:1;
+	unsigned char			minor;
+	unsigned char			num_ports;
+	unsigned char			num_port_pointers;
+	char				num_interrupt_in;
+	char				num_interrupt_out;
+	char				num_bulk_in;
+	char				num_bulk_out;
+	struct usb_serial_port		*port[MAX_NUM_PORTS];
+	struct kref			kref;
+	struct mutex			disc_mutex;
+	void				*private;
+};
+#define to_usb_serial(d) container_of(d, struct usb_serial, kref)
+
+/* get and set the serial private data pointer helper functions */
+static inline void *usb_get_serial_data(struct usb_serial *serial)
+{
+	return serial->private;
+}
+
+static inline void usb_set_serial_data(struct usb_serial *serial, void *data)
+{
+	serial->private = data;
+}
+
+/**
+ * usb_serial_driver - describes a usb serial driver
+ * @description: pointer to a string that describes this driver.  This string
+ *	used in the syslog messages when a device is inserted or removed.
+ * @id_table: pointer to a list of usb_device_id structures that define all
+ *	of the devices this structure can support.
+ * @num_ports: the number of different ports this device will have.
+ * @bulk_in_size: minimum number of bytes to allocate for bulk-in buffer
+ *	(0 = end-point size)
+ * @bulk_out_size: bytes to allocate for bulk-out buffer (0 = end-point size)
+ * @calc_num_ports: pointer to a function to determine how many ports this
+ *	device has dynamically.  It will be called after the probe()
+ *	callback is called, but before attach()
+ * @probe: pointer to the driver's probe function.
+ *	This will be called when the device is inserted into the system,
+ *	but before the device has been fully initialized by the usb_serial
+ *	subsystem.  Use this function to download any firmware to the device,
+ *	or any other early initialization that might be needed.
+ *	Return 0 to continue on with the initialization sequence.  Anything
+ *	else will abort it.
+ * @attach: pointer to the driver's attach function.
+ *	This will be called when the struct usb_serial structure is fully set
+ *	set up.  Do any local initialization of the device, or any private
+ *	memory structure allocation at this point in time.
+ * @disconnect: pointer to the driver's disconnect function.  This will be
+ *	called when the device is unplugged or unbound from the driver.
+ * @release: pointer to the driver's release function.  This will be called
+ *	when the usb_serial data structure is about to be destroyed.
+ * @usb_driver: pointer to the struct usb_driver that controls this
+ *	device.  This is necessary to allow dynamic ids to be added to
+ *	the driver from sysfs.
+ *
+ * This structure is defines a USB Serial driver.  It provides all of
+ * the information that the USB serial core code needs.  If the function
+ * pointers are defined, then the USB serial core code will call them when
+ * the corresponding tty port functions are called.  If they are not
+ * called, the generic serial function will be used instead.
+ *
+ * The driver.owner field should be set to the module owner of this driver.
+ * The driver.name field should be set to the name of this driver (remember
+ * it will show up in sysfs, so it needs to be short and to the point.
+ * Using the module name is a good idea.)
+ */
+struct usb_serial_driver {
+	const char *description;
+	const struct usb_device_id *id_table;
+	char	num_ports;
+
+	struct list_head	driver_list;
+	struct device_driver	driver;
+	struct usb_driver	*usb_driver;
+	struct usb_dynids	dynids;
+
+	size_t			bulk_in_size;
+	size_t			bulk_out_size;
+
+	int (*probe)(struct usb_serial *serial, const struct usb_device_id *id);
+	int (*attach)(struct usb_serial *serial);
+	int (*calc_num_ports) (struct usb_serial *serial);
+
+	void (*disconnect)(struct usb_serial *serial);
+	void (*release)(struct usb_serial *serial);
+
+	int (*port_probe)(struct usb_serial_port *port);
+	int (*port_remove)(struct usb_serial_port *port);
+
+	int (*suspend)(struct usb_serial *serial, pm_message_t message);
+	int (*resume)(struct usb_serial *serial);
+
+	/* serial function calls */
+	/* Called by console and by the tty layer */
+	int  (*open)(struct tty_struct *tty, struct usb_serial_port *port);
+	void (*close)(struct usb_serial_port *port);
+	int  (*write)(struct tty_struct *tty, struct usb_serial_port *port,
+			const unsigned char *buf, int count);
+	/* Called only by the tty layer */
+	int  (*write_room)(struct tty_struct *tty);
+	int  (*ioctl)(struct tty_struct *tty,
+		      unsigned int cmd, unsigned long arg);
+	void (*set_termios)(struct tty_struct *tty,
+			struct usb_serial_port *port, struct ktermios *old);
+	void (*break_ctl)(struct tty_struct *tty, int break_state);
+	int  (*chars_in_buffer)(struct tty_struct *tty);
+	void (*throttle)(struct tty_struct *tty);
+	void (*unthrottle)(struct tty_struct *tty);
+	int  (*tiocmget)(struct tty_struct *tty);
+	int  (*tiocmset)(struct tty_struct *tty,
+			 unsigned int set, unsigned int clear);
+	int  (*get_icount)(struct tty_struct *tty,
+			struct serial_icounter_struct *icount);
+	/* Called by the tty layer for port level work. There may or may not
+	   be an attached tty at this point */
+	void (*dtr_rts)(struct usb_serial_port *port, int on);
+	int  (*carrier_raised)(struct usb_serial_port *port);
+	/* Called by the usb serial hooks to allow the user to rework the
+	   termios state */
+	void (*init_termios)(struct tty_struct *tty);
+	/* USB events */
+	void (*read_int_callback)(struct urb *urb);
+	void (*write_int_callback)(struct urb *urb);
+	void (*read_bulk_callback)(struct urb *urb);
+	void (*write_bulk_callback)(struct urb *urb);
+	/* Called by the generic read bulk callback */
+	void (*process_read_urb)(struct urb *urb);
+	/* Called by the generic write implementation */
+	int (*prepare_write_buffer)(struct usb_serial_port *port,
+						void *dest, size_t size);
+};
+#define to_usb_serial_driver(d) \
+	container_of(d, struct usb_serial_driver, driver)
+
+extern int usb_serial_register_drivers(struct usb_driver *udriver,
+		struct usb_serial_driver * const serial_drivers[]);
+extern void usb_serial_deregister_drivers(struct usb_driver *udriver,
+		struct usb_serial_driver * const serial_drivers[]);
+extern void usb_serial_port_softint(struct usb_serial_port *port);
+
+extern int usb_serial_probe(struct usb_interface *iface,
+			    const struct usb_device_id *id);
+extern void usb_serial_disconnect(struct usb_interface *iface);
+
+extern int usb_serial_suspend(struct usb_interface *intf, pm_message_t message);
+extern int usb_serial_resume(struct usb_interface *intf);
+
+extern int ezusb_writememory(struct usb_serial *serial, int address,
+			     unsigned char *data, int length, __u8 bRequest);
+extern int ezusb_set_reset(struct usb_serial *serial, unsigned char reset_bit);
+
+/* USB Serial console functions */
+#ifdef CONFIG_USB_SERIAL_CONSOLE
+extern void usb_serial_console_init(int debug, int minor);
+extern void usb_serial_console_exit(void);
+extern void usb_serial_console_disconnect(struct usb_serial *serial);
+#else
+static inline void usb_serial_console_init(int debug, int minor) { }
+static inline void usb_serial_console_exit(void) { }
+static inline void usb_serial_console_disconnect(struct usb_serial *serial) {}
+#endif
+
+/* Functions needed by other parts of the usbserial core */
+extern struct usb_serial *usb_serial_get_by_index(unsigned int minor);
+extern void usb_serial_put(struct usb_serial *serial);
+extern int usb_serial_generic_open(struct tty_struct *tty,
+	struct usb_serial_port *port);
+extern int usb_serial_generic_write(struct tty_struct *tty,
+	struct usb_serial_port *port, const unsigned char *buf, int count);
+extern void usb_serial_generic_close(struct usb_serial_port *port);
+extern int usb_serial_generic_resume(struct usb_serial *serial);
+extern int usb_serial_generic_write_room(struct tty_struct *tty);
+extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty);
+extern void usb_serial_generic_read_bulk_callback(struct urb *urb);
+extern void usb_serial_generic_write_bulk_callback(struct urb *urb);
+extern void usb_serial_generic_throttle(struct tty_struct *tty);
+extern void usb_serial_generic_unthrottle(struct tty_struct *tty);
+extern void usb_serial_generic_disconnect(struct usb_serial *serial);
+extern void usb_serial_generic_release(struct usb_serial *serial);
+extern int usb_serial_generic_register(int debug);
+extern void usb_serial_generic_deregister(void);
+extern int usb_serial_generic_submit_read_urbs(struct usb_serial_port *port,
+						 gfp_t mem_flags);
+extern void usb_serial_generic_process_read_urb(struct urb *urb);
+extern int usb_serial_generic_prepare_write_buffer(struct usb_serial_port *port,
+						void *dest, size_t size);
+extern int usb_serial_handle_sysrq_char(struct usb_serial_port *port,
+					unsigned int ch);
+extern int usb_serial_handle_break(struct usb_serial_port *port);
+extern void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port,
+					 struct tty_struct *tty,
+					 unsigned int status);
+
+
+extern int usb_serial_bus_register(struct usb_serial_driver *device);
+extern void usb_serial_bus_deregister(struct usb_serial_driver *device);
+
+extern struct usb_serial_driver usb_serial_generic_device;
+extern struct bus_type usb_serial_bus_type;
+extern struct tty_driver *usb_serial_tty_driver;
+
+static inline void usb_serial_debug_data(int debug,
+					 struct device *dev,
+					 const char *function, int size,
+					 const unsigned char *data)
+{
+	int i;
+
+	if (debug) {
+		dev_printk(KERN_DEBUG, dev, "%s - length = %d, data = ",
+			   function, size);
+		for (i = 0; i < size; ++i)
+			printk("%.2x ", data[i]);
+		printk("\n");
+	}
+}
+
+/* Use our own dbg macro */
+#undef dbg
+#define dbg(format, arg...)						\
+do {									\
+	if (debug)							\
+		printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg);	\
+} while (0)
+
+/*
+ * Macro for reporting errors in write path to avoid inifinite loop
+ * when port is used as a console.
+ */
+#define dev_err_console(usport, fmt, ...)				\
+do {									\
+	static bool __print_once;					\
+	struct usb_serial_port *__port = (usport);			\
+									\
+	if (!__port->port.console || !__print_once) {			\
+		__print_once = true;					\
+		dev_err(&__port->dev, fmt, ##__VA_ARGS__);		\
+	}								\
+} while (0)
+
+/*
+ * module_usb_serial_driver() - Helper macro for registering a USB Serial driver
+ * @__usb_driver: usb_driver struct to register
+ * @__serial_drivers: list of usb_serial drivers to register
+ *
+ * Helper macro for USB serial drivers which do not do anything special
+ * in module init/exit. This eliminates a lot of boilerplate. Each
+ * module may only use this macro once, and calling it replaces
+ * module_init() and module_exit()
+ *
+ */
+#define module_usb_serial_driver(__usb_driver, __serial_drivers)	\
+	module_driver(__usb_driver, usb_serial_register_drivers,	\
+		       usb_serial_deregister_drivers, __serial_drivers)
+
+#endif /* __LINUX_USB_SERIAL_H */
+
diff --git a/include/linux/usb/sl811.h b/include/linux/usb/sl811.h
new file mode 100644
index 00000000..3afe4d16
--- /dev/null
+++ b/include/linux/usb/sl811.h
@@ -0,0 +1,29 @@
+/*
+ * board initialization should put one of these into dev->platform_data
+ * and place the sl811hs onto platform_bus named "sl811-hcd".
+ */
+
+#ifndef __LINUX_USB_SL811_H
+#define __LINUX_USB_SL811_H
+
+struct sl811_platform_data {
+	unsigned	can_wakeup:1;
+
+	/* given port_power, msec/2 after power on till power good */
+	u8		potpg;
+
+	/* mA/2 power supplied on this port (max = default = 250) */
+	u8		power;
+
+	/* sl811 relies on an external source of VBUS current */
+	void		(*port_power)(struct device *dev, int is_on);
+
+	/* pulse sl811 nRST (probably with a GPIO) */
+	void		(*reset)(struct device *dev);
+
+	/* some boards need something like these: */
+	/* int		(*check_overcurrent)(struct device *dev); */
+	/* void		(*clock_enable)(struct device *dev, int is_on); */
+};
+
+#endif /* __LINUX_USB_SL811_H */
diff --git a/include/linux/usb/storage.h b/include/linux/usb/storage.h
new file mode 100644
index 00000000..cb33fff2
--- /dev/null
+++ b/include/linux/usb/storage.h
@@ -0,0 +1,86 @@
+#ifndef __LINUX_USB_STORAGE_H
+#define __LINUX_USB_STORAGE_H
+
+/*
+ * linux/usb/storage.h
+ *
+ * Copyright Matthew Wilcox for Intel Corp, 2010
+ *
+ * This file contains definitions taken from the
+ * USB Mass Storage Class Specification Overview
+ *
+ * Distributed under the terms of the GNU GPL, version two.
+ */
+
+/* Storage subclass codes */
+
+#define USB_SC_RBC	0x01		/* Typically, flash devices */
+#define USB_SC_8020	0x02		/* CD-ROM */
+#define USB_SC_QIC	0x03		/* QIC-157 Tapes */
+#define USB_SC_UFI	0x04		/* Floppy */
+#define USB_SC_8070	0x05		/* Removable media */
+#define USB_SC_SCSI	0x06		/* Transparent */
+#define USB_SC_LOCKABLE	0x07		/* Password-protected */
+
+#define USB_SC_ISD200	0xf0		/* ISD200 ATA */
+#define USB_SC_CYP_ATACB	0xf1	/* Cypress ATACB */
+#define USB_SC_DEVICE	0xff		/* Use device's value */
+
+/* Storage protocol codes */
+
+#define USB_PR_CBI	0x00		/* Control/Bulk/Interrupt */
+#define USB_PR_CB	0x01		/* Control/Bulk w/o interrupt */
+#define USB_PR_BULK	0x50		/* bulk only */
+#define USB_PR_UAS	0x62		/* USB Attached SCSI */
+
+#define USB_PR_USBAT	0x80		/* SCM-ATAPI bridge */
+#define USB_PR_EUSB_SDDR09	0x81	/* SCM-SCSI bridge for SDDR-09 */
+#define USB_PR_SDDR55	0x82		/* SDDR-55 (made up) */
+#define USB_PR_DPCM_USB	0xf0		/* Combination CB/SDDR09 */
+#define USB_PR_FREECOM	0xf1		/* Freecom */
+#define USB_PR_DATAFAB	0xf2		/* Datafab chipsets */
+#define USB_PR_JUMPSHOT	0xf3		/* Lexar Jumpshot */
+#define USB_PR_ALAUDA	0xf4		/* Alauda chipsets */
+#define USB_PR_KARMA	0xf5		/* Rio Karma */
+
+#define USB_PR_DEVICE	0xff		/* Use device's value */
+
+ /*
+  * Bulk only data structures
+  */
+
+/* command block wrapper */
+struct bulk_cb_wrap {
+	__le32	Signature;		/* contains 'USBC' */
+	__u32	Tag;			/* unique per command id */
+	__le32	DataTransferLength;	/* size of data */
+	__u8	Flags;			/* direction in bit 0 */
+	__u8	Lun;			/* LUN normally 0 */
+	__u8	Length;			/* of of the CDB */
+	__u8	CDB[16];		/* max command */
+};
+
+#define US_BULK_CB_WRAP_LEN	31
+#define US_BULK_CB_SIGN		0x43425355	/*spells out USBC */
+#define US_BULK_FLAG_IN		(1 << 7)
+#define US_BULK_FLAG_OUT	0
+
+/* command status wrapper */
+struct bulk_cs_wrap {
+	__le32	Signature;	/* should = 'USBS' */
+	__u32	Tag;		/* same as original command */
+	__le32	Residue;	/* amount not transferred */
+	__u8	Status;		/* see below */
+};
+
+#define US_BULK_CS_WRAP_LEN	13
+#define US_BULK_CS_SIGN		0x53425355      /* spells out 'USBS' */
+#define US_BULK_STAT_OK		0
+#define US_BULK_STAT_FAIL	1
+#define US_BULK_STAT_PHASE	2
+
+/* bulk-only class specific requests */
+#define US_BULK_RESET_REQUEST   0xff
+#define US_BULK_GET_MAX_LUN     0xfe
+
+#endif
diff --git a/include/linux/usb/tmc.h b/include/linux/usb/tmc.h
new file mode 100644
index 00000000..c045ae12
--- /dev/null
+++ b/include/linux/usb/tmc.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2007 Stefan Kopp, Gechingen, Germany
+ * Copyright (C) 2008 Novell, Inc.
+ * Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ * This file holds USB constants defined by the USB Device Class
+ * Definition for Test and Measurement devices published by the USB-IF.
+ *
+ * It also has the ioctl definitions for the usbtmc kernel driver that
+ * userspace needs to know about.
+ */
+
+#ifndef __LINUX_USB_TMC_H
+#define __LINUX_USB_TMC_H
+
+/* USB TMC status values */
+#define USBTMC_STATUS_SUCCESS				0x01
+#define USBTMC_STATUS_PENDING				0x02
+#define USBTMC_STATUS_FAILED				0x80
+#define USBTMC_STATUS_TRANSFER_NOT_IN_PROGRESS		0x81
+#define USBTMC_STATUS_SPLIT_NOT_IN_PROGRESS		0x82
+#define USBTMC_STATUS_SPLIT_IN_PROGRESS			0x83
+
+/* USB TMC requests values */
+#define USBTMC_REQUEST_INITIATE_ABORT_BULK_OUT		1
+#define USBTMC_REQUEST_CHECK_ABORT_BULK_OUT_STATUS	2
+#define USBTMC_REQUEST_INITIATE_ABORT_BULK_IN		3
+#define USBTMC_REQUEST_CHECK_ABORT_BULK_IN_STATUS	4
+#define USBTMC_REQUEST_INITIATE_CLEAR			5
+#define USBTMC_REQUEST_CHECK_CLEAR_STATUS		6
+#define USBTMC_REQUEST_GET_CAPABILITIES			7
+#define USBTMC_REQUEST_INDICATOR_PULSE			64
+
+/* Request values for USBTMC driver's ioctl entry point */
+#define USBTMC_IOC_NR			91
+#define USBTMC_IOCTL_INDICATOR_PULSE	_IO(USBTMC_IOC_NR, 1)
+#define USBTMC_IOCTL_CLEAR		_IO(USBTMC_IOC_NR, 2)
+#define USBTMC_IOCTL_ABORT_BULK_OUT	_IO(USBTMC_IOC_NR, 3)
+#define USBTMC_IOCTL_ABORT_BULK_IN	_IO(USBTMC_IOC_NR, 4)
+#define USBTMC_IOCTL_CLEAR_OUT_HALT	_IO(USBTMC_IOC_NR, 6)
+#define USBTMC_IOCTL_CLEAR_IN_HALT	_IO(USBTMC_IOC_NR, 7)
+
+#endif
diff --git a/include/linux/usb/uas.h b/include/linux/usb/uas.h
new file mode 100644
index 00000000..9a988e41
--- /dev/null
+++ b/include/linux/usb/uas.h
@@ -0,0 +1,69 @@
+#ifndef __USB_UAS_H__
+#define __USB_UAS_H__
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+
+/* Common header for all IUs */
+struct iu {
+	__u8 iu_id;
+	__u8 rsvd1;
+	__be16 tag;
+};
+
+enum {
+	IU_ID_COMMAND		= 0x01,
+	IU_ID_STATUS		= 0x03,
+	IU_ID_RESPONSE		= 0x04,
+	IU_ID_TASK_MGMT		= 0x05,
+	IU_ID_READ_READY	= 0x06,
+	IU_ID_WRITE_READY	= 0x07,
+};
+
+struct command_iu {
+	__u8 iu_id;
+	__u8 rsvd1;
+	__be16 tag;
+	__u8 prio_attr;
+	__u8 rsvd5;
+	__u8 len;
+	__u8 rsvd7;
+	struct scsi_lun lun;
+	__u8 cdb[16];	/* XXX: Overflow-checking tools may misunderstand */
+};
+
+/*
+ * Also used for the Read Ready and Write Ready IUs since they have the
+ * same first four bytes
+ */
+struct sense_iu {
+	__u8 iu_id;
+	__u8 rsvd1;
+	__be16 tag;
+	__be16 status_qual;
+	__u8 status;
+	__u8 rsvd7[7];
+	__be16 len;
+	__u8 sense[SCSI_SENSE_BUFFERSIZE];
+};
+
+struct usb_pipe_usage_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  bPipeID;
+	__u8  Reserved;
+} __attribute__((__packed__));
+
+enum {
+	CMD_PIPE_ID		= 1,
+	STATUS_PIPE_ID		= 2,
+	DATA_IN_PIPE_ID		= 3,
+	DATA_OUT_PIPE_ID	= 4,
+
+	UAS_SIMPLE_TAG		= 0,
+	UAS_HEAD_TAG		= 1,
+	UAS_ORDERED_TAG		= 2,
+	UAS_ACA			= 4,
+};
+#endif
diff --git a/include/linux/usb/ulpi.h b/include/linux/usb/ulpi.h
new file mode 100644
index 00000000..6f033a41
--- /dev/null
+++ b/include/linux/usb/ulpi.h
@@ -0,0 +1,192 @@
+/*
+ * ulpi.h -- ULPI defines and function prorotypes
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * This software is distributed under the terms of the GNU General
+ * Public License ("GPL") as published by the Free Software Foundation,
+ * version 2 of that License.
+ */
+
+#ifndef __LINUX_USB_ULPI_H
+#define __LINUX_USB_ULPI_H
+
+#include <linux/usb/otg.h>
+/*-------------------------------------------------------------------------*/
+
+/*
+ * ULPI Flags
+ */
+#define ULPI_OTG_ID_PULLUP		(1 << 0)
+#define ULPI_OTG_DP_PULLDOWN_DIS	(1 << 1)
+#define ULPI_OTG_DM_PULLDOWN_DIS	(1 << 2)
+#define ULPI_OTG_DISCHRGVBUS		(1 << 3)
+#define ULPI_OTG_CHRGVBUS		(1 << 4)
+#define ULPI_OTG_DRVVBUS		(1 << 5)
+#define ULPI_OTG_DRVVBUS_EXT		(1 << 6)
+#define ULPI_OTG_EXTVBUSIND		(1 << 7)
+
+#define ULPI_IC_6PIN_SERIAL		(1 << 8)
+#define ULPI_IC_3PIN_SERIAL		(1 << 9)
+#define ULPI_IC_CARKIT			(1 << 10)
+#define ULPI_IC_CLKSUSPM		(1 << 11)
+#define ULPI_IC_AUTORESUME		(1 << 12)
+#define ULPI_IC_EXTVBUS_INDINV		(1 << 13)
+#define ULPI_IC_IND_PASSTHRU		(1 << 14)
+#define ULPI_IC_PROTECT_DIS		(1 << 15)
+
+#define ULPI_FC_HS			(1 << 16)
+#define ULPI_FC_FS			(1 << 17)
+#define ULPI_FC_LS			(1 << 18)
+#define ULPI_FC_FS4LS			(1 << 19)
+#define ULPI_FC_TERMSEL			(1 << 20)
+#define ULPI_FC_OP_NORM			(1 << 21)
+#define ULPI_FC_OP_NODRV		(1 << 22)
+#define ULPI_FC_OP_DIS_NRZI		(1 << 23)
+#define ULPI_FC_OP_NSYNC_NEOP		(1 << 24)
+#define ULPI_FC_RST			(1 << 25)
+#define ULPI_FC_SUSPM			(1 << 26)
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Macros for Set and Clear
+ * See ULPI 1.1 specification to find the registers with Set and Clear offsets
+ */
+#define ULPI_SET(a)				(a + 1)
+#define ULPI_CLR(a)				(a + 2)
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Register Map
+ */
+#define ULPI_VENDOR_ID_LOW			0x00
+#define ULPI_VENDOR_ID_HIGH			0x01
+#define ULPI_PRODUCT_ID_LOW			0x02
+#define ULPI_PRODUCT_ID_HIGH			0x03
+#define ULPI_FUNC_CTRL				0x04
+#define ULPI_IFC_CTRL				0x07
+#define ULPI_OTG_CTRL				0x0a
+#define ULPI_USB_INT_EN_RISE			0x0d
+#define ULPI_USB_INT_EN_FALL			0x10
+#define ULPI_USB_INT_STS			0x13
+#define ULPI_USB_INT_LATCH			0x14
+#define ULPI_DEBUG				0x15
+#define ULPI_SCRATCH				0x16
+/* Optional Carkit Registers */
+#define ULPI_CARCIT_CTRL			0x19
+#define ULPI_CARCIT_INT_DELAY			0x1c
+#define ULPI_CARCIT_INT_EN			0x1d
+#define ULPI_CARCIT_INT_STS			0x20
+#define ULPI_CARCIT_INT_LATCH			0x21
+#define ULPI_CARCIT_PLS_CTRL			0x22
+/* Other Optional Registers */
+#define ULPI_TX_POS_WIDTH			0x25
+#define ULPI_TX_NEG_WIDTH			0x26
+#define ULPI_POLARITY_RECOVERY			0x27
+/* Access Extended Register Set */
+#define ULPI_ACCESS_EXTENDED			0x2f
+/* Vendor Specific */
+#define ULPI_VENDOR_SPECIFIC			0x30
+/* Extended Registers */
+#define ULPI_EXT_VENDOR_SPECIFIC		0x80
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Register Bits
+ */
+
+/* Function Control */
+#define ULPI_FUNC_CTRL_XCVRSEL			(1 << 0)
+#define  ULPI_FUNC_CTRL_XCVRSEL_MASK		(3 << 0)
+#define  ULPI_FUNC_CTRL_HIGH_SPEED		(0 << 0)
+#define  ULPI_FUNC_CTRL_FULL_SPEED		(1 << 0)
+#define  ULPI_FUNC_CTRL_LOW_SPEED		(2 << 0)
+#define  ULPI_FUNC_CTRL_FS4LS			(3 << 0)
+#define ULPI_FUNC_CTRL_TERMSELECT		(1 << 2)
+#define ULPI_FUNC_CTRL_OPMODE			(1 << 3)
+#define  ULPI_FUNC_CTRL_OPMODE_MASK		(3 << 3)
+#define  ULPI_FUNC_CTRL_OPMODE_NORMAL		(0 << 3)
+#define  ULPI_FUNC_CTRL_OPMODE_NONDRIVING	(1 << 3)
+#define  ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI	(2 << 3)
+#define  ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP	(3 << 3)
+#define ULPI_FUNC_CTRL_RESET			(1 << 5)
+#define ULPI_FUNC_CTRL_SUSPENDM			(1 << 6)
+
+/* Interface Control */
+#define ULPI_IFC_CTRL_6_PIN_SERIAL_MODE		(1 << 0)
+#define ULPI_IFC_CTRL_3_PIN_SERIAL_MODE		(1 << 1)
+#define ULPI_IFC_CTRL_CARKITMODE		(1 << 2)
+#define ULPI_IFC_CTRL_CLOCKSUSPENDM		(1 << 3)
+#define ULPI_IFC_CTRL_AUTORESUME		(1 << 4)
+#define ULPI_IFC_CTRL_EXTERNAL_VBUS		(1 << 5)
+#define ULPI_IFC_CTRL_PASSTHRU			(1 << 6)
+#define ULPI_IFC_CTRL_PROTECT_IFC_DISABLE	(1 << 7)
+
+/* OTG Control */
+#define ULPI_OTG_CTRL_ID_PULLUP			(1 << 0)
+#define ULPI_OTG_CTRL_DP_PULLDOWN		(1 << 1)
+#define ULPI_OTG_CTRL_DM_PULLDOWN		(1 << 2)
+#define ULPI_OTG_CTRL_DISCHRGVBUS		(1 << 3)
+#define ULPI_OTG_CTRL_CHRGVBUS			(1 << 4)
+#define ULPI_OTG_CTRL_DRVVBUS			(1 << 5)
+#define ULPI_OTG_CTRL_DRVVBUS_EXT		(1 << 6)
+#define ULPI_OTG_CTRL_EXTVBUSIND		(1 << 7)
+
+/* USB Interrupt Enable Rising,
+ * USB Interrupt Enable Falling,
+ * USB Interrupt Status and
+ * USB Interrupt Latch
+ */
+#define ULPI_INT_HOST_DISCONNECT		(1 << 0)
+#define ULPI_INT_VBUS_VALID			(1 << 1)
+#define ULPI_INT_SESS_VALID			(1 << 2)
+#define ULPI_INT_SESS_END			(1 << 3)
+#define ULPI_INT_IDGRD				(1 << 4)
+
+/* Debug */
+#define ULPI_DEBUG_LINESTATE0			(1 << 0)
+#define ULPI_DEBUG_LINESTATE1			(1 << 1)
+
+/* Carkit Control */
+#define ULPI_CARKIT_CTRL_CARKITPWR		(1 << 0)
+#define ULPI_CARKIT_CTRL_IDGNDDRV		(1 << 1)
+#define ULPI_CARKIT_CTRL_TXDEN			(1 << 2)
+#define ULPI_CARKIT_CTRL_RXDEN			(1 << 3)
+#define ULPI_CARKIT_CTRL_SPKLEFTEN		(1 << 4)
+#define ULPI_CARKIT_CTRL_SPKRIGHTEN		(1 << 5)
+#define ULPI_CARKIT_CTRL_MICEN			(1 << 6)
+
+/* Carkit Interrupt Enable */
+#define ULPI_CARKIT_INT_EN_IDFLOAT_RISE		(1 << 0)
+#define ULPI_CARKIT_INT_EN_IDFLOAT_FALL		(1 << 1)
+#define ULPI_CARKIT_INT_EN_CARINTDET		(1 << 2)
+#define ULPI_CARKIT_INT_EN_DP_RISE		(1 << 3)
+#define ULPI_CARKIT_INT_EN_DP_FALL		(1 << 4)
+
+/* Carkit Interrupt Status and
+ * Carkit Interrupt Latch
+ */
+#define ULPI_CARKIT_INT_IDFLOAT			(1 << 0)
+#define ULPI_CARKIT_INT_CARINTDET		(1 << 1)
+#define ULPI_CARKIT_INT_DP			(1 << 2)
+
+/* Carkit Pulse Control*/
+#define ULPI_CARKIT_PLS_CTRL_TXPLSEN		(1 << 0)
+#define ULPI_CARKIT_PLS_CTRL_RXPLSEN		(1 << 1)
+#define ULPI_CARKIT_PLS_CTRL_SPKRLEFT_BIASEN	(1 << 2)
+#define ULPI_CARKIT_PLS_CTRL_SPKRRIGHT_BIASEN	(1 << 3)
+
+/*-------------------------------------------------------------------------*/
+
+struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops,
+					unsigned int flags);
+
+#ifdef CONFIG_USB_ULPI_VIEWPORT
+/* access ops for controllers with a viewport register */
+extern struct usb_phy_io_ops ulpi_viewport_access_ops;
+#endif
+
+#endif /* __LINUX_USB_ULPI_H */
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
new file mode 100644
index 00000000..76f43964
--- /dev/null
+++ b/include/linux/usb/usbnet.h
@@ -0,0 +1,232 @@
+/*
+ * USB Networking Link Interface
+ *
+ * Copyright (C) 2000-2005 by David Brownell <dbrownell@users.sourceforge.net>
+ * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef	__LINUX_USB_USBNET_H
+#define	__LINUX_USB_USBNET_H
+
+/* interface from usbnet core to each USB networking link we handle */
+struct usbnet {
+	/* housekeeping */
+	struct usb_device	*udev;
+	struct usb_interface	*intf;
+	struct driver_info	*driver_info;
+	const char		*driver_name;
+	void			*driver_priv;
+	wait_queue_head_t	*wait;
+	struct mutex		phy_mutex;
+	unsigned char		suspend_count;
+
+	/* i/o info: pipes etc */
+	unsigned		in, out;
+	struct usb_host_endpoint *status;
+	unsigned		maxpacket;
+	struct timer_list	delay;
+
+	/* protocol/interface state */
+	struct net_device	*net;
+	int			msg_enable;
+	unsigned long		data[5];
+	u32			xid;
+	u32			hard_mtu;	/* count any extra framing */
+	size_t			rx_urb_size;	/* size for rx urbs */
+	struct mii_if_info	mii;
+
+	/* various kinds of pending driver work */
+	struct sk_buff_head	rxq;
+	struct sk_buff_head	txq;
+	struct sk_buff_head	done;
+	struct sk_buff_head	rxq_pause;
+	struct urb		*interrupt;
+	struct usb_anchor	deferred;
+	struct tasklet_struct	bh;
+
+	struct work_struct	kevent;
+	unsigned long		flags;
+#		define EVENT_TX_HALT	0
+#		define EVENT_RX_HALT	1
+#		define EVENT_RX_MEMORY	2
+#		define EVENT_STS_SPLIT	3
+#		define EVENT_LINK_RESET	4
+#		define EVENT_RX_PAUSED	5
+#		define EVENT_DEV_WAKING 6
+#		define EVENT_DEV_ASLEEP 7
+#		define EVENT_DEV_OPEN	8
+};
+
+static inline struct usb_driver *driver_of(struct usb_interface *intf)
+{
+	return to_usb_driver(intf->dev.driver);
+}
+
+/* interface from the device/framing level "minidriver" to core */
+struct driver_info {
+	char		*description;
+
+	int		flags;
+/* framing is CDC Ethernet, not writing ZLPs (hw issues), or optionally: */
+#define FLAG_FRAMING_NC	0x0001		/* guard against device dropouts */
+#define FLAG_FRAMING_GL	0x0002		/* genelink batches packets */
+#define FLAG_FRAMING_Z	0x0004		/* zaurus adds a trailer */
+#define FLAG_FRAMING_RN	0x0008		/* RNDIS batches, plus huge header */
+
+#define FLAG_NO_SETINT	0x0010		/* device can't set_interface() */
+#define FLAG_ETHER	0x0020		/* maybe use "eth%d" names */
+
+#define FLAG_FRAMING_AX 0x0040		/* AX88772/178 packets */
+#define FLAG_WLAN	0x0080		/* use "wlan%d" names */
+#define FLAG_AVOID_UNLINK_URBS 0x0100	/* don't unlink urbs at usbnet_stop() */
+#define FLAG_SEND_ZLP	0x0200		/* hw requires ZLPs are sent */
+#define FLAG_WWAN	0x0400		/* use "wwan%d" names */
+
+#define FLAG_LINK_INTR	0x0800		/* updates link (carrier) status */
+
+#define FLAG_POINTTOPOINT 0x1000	/* possibly use "usb%d" names */
+
+/*
+ * Indicates to usbnet, that USB driver accumulates multiple IP packets.
+ * Affects statistic (counters) and short packet handling.
+ */
+#define FLAG_MULTI_PACKET	0x2000
+#define FLAG_RX_ASSEMBLE	0x4000	/* rx packets may span >1 frames */
+
+	/* init device ... can sleep, or cause probe() failure */
+	int	(*bind)(struct usbnet *, struct usb_interface *);
+
+	/* cleanup device ... can sleep, but can't fail */
+	void	(*unbind)(struct usbnet *, struct usb_interface *);
+
+	/* reset device ... can sleep */
+	int	(*reset)(struct usbnet *);
+
+	/* stop device ... can sleep */
+	int	(*stop)(struct usbnet *);
+
+	/* see if peer is connected ... can sleep */
+	int	(*check_connect)(struct usbnet *);
+
+	/* (dis)activate runtime power management */
+	int	(*manage_power)(struct usbnet *, int);
+
+	/* for status polling */
+	void	(*status)(struct usbnet *, struct urb *);
+
+	/* link reset handling, called from defer_kevent */
+	int	(*link_reset)(struct usbnet *);
+
+	/* fixup rx packet (strip framing) */
+	int	(*rx_fixup)(struct usbnet *dev, struct sk_buff *skb);
+
+	/* fixup tx packet (add framing) */
+	struct sk_buff	*(*tx_fixup)(struct usbnet *dev,
+				struct sk_buff *skb, gfp_t flags);
+
+	/* early initialization code, can sleep. This is for minidrivers
+	 * having 'subminidrivers' that need to do extra initialization
+	 * right after minidriver have initialized hardware. */
+	int	(*early_init)(struct usbnet *dev);
+
+	/* called by minidriver when receiving indication */
+	void	(*indication)(struct usbnet *dev, void *ind, int indlen);
+
+	/* for new devices, use the descriptor-reading code instead */
+	int		in;		/* rx endpoint */
+	int		out;		/* tx endpoint */
+
+	unsigned long	data;		/* Misc driver specific data */
+};
+
+/* Minidrivers are just drivers using the "usbnet" core as a powerful
+ * network-specific subroutine library ... that happens to do pretty
+ * much everything except custom framing and chip-specific stuff.
+ */
+extern int usbnet_probe(struct usb_interface *, const struct usb_device_id *);
+extern int usbnet_suspend(struct usb_interface *, pm_message_t);
+extern int usbnet_resume(struct usb_interface *);
+extern void usbnet_disconnect(struct usb_interface *);
+
+
+/* Drivers that reuse some of the standard USB CDC infrastructure
+ * (notably, using multiple interfaces according to the CDC
+ * union descriptor) get some helper code.
+ */
+struct cdc_state {
+	struct usb_cdc_header_desc	*header;
+	struct usb_cdc_union_desc	*u;
+	struct usb_cdc_ether_desc	*ether;
+	struct usb_interface		*control;
+	struct usb_interface		*data;
+};
+
+extern int usbnet_generic_cdc_bind(struct usbnet *, struct usb_interface *);
+extern int usbnet_cdc_bind(struct usbnet *, struct usb_interface *);
+extern void usbnet_cdc_unbind(struct usbnet *, struct usb_interface *);
+extern void usbnet_cdc_status(struct usbnet *, struct urb *);
+
+/* CDC and RNDIS support the same host-chosen packet filters for IN transfers */
+#define	DEFAULT_FILTER	(USB_CDC_PACKET_TYPE_BROADCAST \
+			|USB_CDC_PACKET_TYPE_ALL_MULTICAST \
+			|USB_CDC_PACKET_TYPE_PROMISCUOUS \
+			|USB_CDC_PACKET_TYPE_DIRECTED)
+
+
+/* we record the state for each of our queued skbs */
+enum skb_state {
+	illegal = 0,
+	tx_start, tx_done,
+	rx_start, rx_done, rx_cleanup,
+	unlink_start
+};
+
+struct skb_data {	/* skb->cb is one of these */
+	struct urb		*urb;
+	struct usbnet		*dev;
+	enum skb_state		state;
+	size_t			length;
+};
+
+extern int usbnet_open(struct net_device *net);
+extern int usbnet_stop(struct net_device *net);
+extern netdev_tx_t usbnet_start_xmit(struct sk_buff *skb,
+				     struct net_device *net);
+extern void usbnet_tx_timeout(struct net_device *net);
+extern int usbnet_change_mtu(struct net_device *net, int new_mtu);
+
+extern int usbnet_get_endpoints(struct usbnet *, struct usb_interface *);
+extern int usbnet_get_ethernet_addr(struct usbnet *, int);
+extern void usbnet_defer_kevent(struct usbnet *, int);
+extern void usbnet_skb_return(struct usbnet *, struct sk_buff *);
+extern void usbnet_unlink_rx_urbs(struct usbnet *);
+
+extern void usbnet_pause_rx(struct usbnet *);
+extern void usbnet_resume_rx(struct usbnet *);
+extern void usbnet_purge_paused_rxq(struct usbnet *);
+
+extern int usbnet_get_settings(struct net_device *net,
+			       struct ethtool_cmd *cmd);
+extern int usbnet_set_settings(struct net_device *net,
+			       struct ethtool_cmd *cmd);
+extern u32 usbnet_get_link(struct net_device *net);
+extern u32 usbnet_get_msglevel(struct net_device *);
+extern void usbnet_set_msglevel(struct net_device *, u32);
+extern void usbnet_get_drvinfo(struct net_device *, struct ethtool_drvinfo *);
+extern int usbnet_nway_reset(struct net_device *net);
+
+#endif /* __LINUX_USB_USBNET_H */
diff --git a/include/linux/usb/video.h b/include/linux/usb/video.h
new file mode 100644
index 00000000..3b3b95e0
--- /dev/null
+++ b/include/linux/usb/video.h
@@ -0,0 +1,568 @@
+/*
+ * USB Video Class definitions.
+ *
+ * Copyright (C) 2009 Laurent Pinchart <laurent.pinchart@skynet.be>
+ *
+ * This file holds USB constants and structures defined by the USB Device
+ * Class Definition for Video Devices. Unless otherwise stated, comments
+ * below reference relevant sections of the USB Video Class 1.1 specification
+ * available at
+ *
+ * http://www.usb.org/developers/devclass_docs/USB_Video_Class_1_1.zip
+ */
+
+#ifndef __LINUX_USB_VIDEO_H
+#define __LINUX_USB_VIDEO_H
+
+#include <linux/types.h>
+
+/* --------------------------------------------------------------------------
+ * UVC constants
+ */
+
+/* A.2. Video Interface Subclass Codes */
+#define UVC_SC_UNDEFINED				0x00
+#define UVC_SC_VIDEOCONTROL				0x01
+#define UVC_SC_VIDEOSTREAMING				0x02
+#define UVC_SC_VIDEO_INTERFACE_COLLECTION		0x03
+
+/* A.3. Video Interface Protocol Codes */
+#define UVC_PC_PROTOCOL_UNDEFINED			0x00
+
+/* A.5. Video Class-Specific VC Interface Descriptor Subtypes */
+#define UVC_VC_DESCRIPTOR_UNDEFINED			0x00
+#define UVC_VC_HEADER					0x01
+#define UVC_VC_INPUT_TERMINAL				0x02
+#define UVC_VC_OUTPUT_TERMINAL				0x03
+#define UVC_VC_SELECTOR_UNIT				0x04
+#define UVC_VC_PROCESSING_UNIT				0x05
+#define UVC_VC_EXTENSION_UNIT				0x06
+
+/* A.6. Video Class-Specific VS Interface Descriptor Subtypes */
+#define UVC_VS_UNDEFINED				0x00
+#define UVC_VS_INPUT_HEADER				0x01
+#define UVC_VS_OUTPUT_HEADER				0x02
+#define UVC_VS_STILL_IMAGE_FRAME			0x03
+#define UVC_VS_FORMAT_UNCOMPRESSED			0x04
+#define UVC_VS_FRAME_UNCOMPRESSED			0x05
+#define UVC_VS_FORMAT_MJPEG				0x06
+#define UVC_VS_FRAME_MJPEG				0x07
+#define UVC_VS_FORMAT_MPEG2TS				0x0a
+#define UVC_VS_FORMAT_DV				0x0c
+#define UVC_VS_COLORFORMAT				0x0d
+#define UVC_VS_FORMAT_FRAME_BASED			0x10
+#define UVC_VS_FRAME_FRAME_BASED			0x11
+#define UVC_VS_FORMAT_STREAM_BASED			0x12
+
+/* A.7. Video Class-Specific Endpoint Descriptor Subtypes */
+#define UVC_EP_UNDEFINED				0x00
+#define UVC_EP_GENERAL					0x01
+#define UVC_EP_ENDPOINT					0x02
+#define UVC_EP_INTERRUPT				0x03
+
+/* A.8. Video Class-Specific Request Codes */
+#define UVC_RC_UNDEFINED				0x00
+#define UVC_SET_CUR					0x01
+#define UVC_GET_CUR					0x81
+#define UVC_GET_MIN					0x82
+#define UVC_GET_MAX					0x83
+#define UVC_GET_RES					0x84
+#define UVC_GET_LEN					0x85
+#define UVC_GET_INFO					0x86
+#define UVC_GET_DEF					0x87
+
+/* A.9.1. VideoControl Interface Control Selectors */
+#define UVC_VC_CONTROL_UNDEFINED			0x00
+#define UVC_VC_VIDEO_POWER_MODE_CONTROL			0x01
+#define UVC_VC_REQUEST_ERROR_CODE_CONTROL		0x02
+
+/* A.9.2. Terminal Control Selectors */
+#define UVC_TE_CONTROL_UNDEFINED			0x00
+
+/* A.9.3. Selector Unit Control Selectors */
+#define UVC_SU_CONTROL_UNDEFINED			0x00
+#define UVC_SU_INPUT_SELECT_CONTROL			0x01
+
+/* A.9.4. Camera Terminal Control Selectors */
+#define UVC_CT_CONTROL_UNDEFINED			0x00
+#define UVC_CT_SCANNING_MODE_CONTROL			0x01
+#define UVC_CT_AE_MODE_CONTROL				0x02
+#define UVC_CT_AE_PRIORITY_CONTROL			0x03
+#define UVC_CT_EXPOSURE_TIME_ABSOLUTE_CONTROL		0x04
+#define UVC_CT_EXPOSURE_TIME_RELATIVE_CONTROL		0x05
+#define UVC_CT_FOCUS_ABSOLUTE_CONTROL			0x06
+#define UVC_CT_FOCUS_RELATIVE_CONTROL			0x07
+#define UVC_CT_FOCUS_AUTO_CONTROL			0x08
+#define UVC_CT_IRIS_ABSOLUTE_CONTROL			0x09
+#define UVC_CT_IRIS_RELATIVE_CONTROL			0x0a
+#define UVC_CT_ZOOM_ABSOLUTE_CONTROL			0x0b
+#define UVC_CT_ZOOM_RELATIVE_CONTROL			0x0c
+#define UVC_CT_PANTILT_ABSOLUTE_CONTROL			0x0d
+#define UVC_CT_PANTILT_RELATIVE_CONTROL			0x0e
+#define UVC_CT_ROLL_ABSOLUTE_CONTROL			0x0f
+#define UVC_CT_ROLL_RELATIVE_CONTROL			0x10
+#define UVC_CT_PRIVACY_CONTROL				0x11
+
+/* A.9.5. Processing Unit Control Selectors */
+#define UVC_PU_CONTROL_UNDEFINED			0x00
+#define UVC_PU_BACKLIGHT_COMPENSATION_CONTROL		0x01
+#define UVC_PU_BRIGHTNESS_CONTROL			0x02
+#define UVC_PU_CONTRAST_CONTROL				0x03
+#define UVC_PU_GAIN_CONTROL				0x04
+#define UVC_PU_POWER_LINE_FREQUENCY_CONTROL		0x05
+#define UVC_PU_HUE_CONTROL				0x06
+#define UVC_PU_SATURATION_CONTROL			0x07
+#define UVC_PU_SHARPNESS_CONTROL			0x08
+#define UVC_PU_GAMMA_CONTROL				0x09
+#define UVC_PU_WHITE_BALANCE_TEMPERATURE_CONTROL	0x0a
+#define UVC_PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL	0x0b
+#define UVC_PU_WHITE_BALANCE_COMPONENT_CONTROL		0x0c
+#define UVC_PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL	0x0d
+#define UVC_PU_DIGITAL_MULTIPLIER_CONTROL		0x0e
+#define UVC_PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL		0x0f
+#define UVC_PU_HUE_AUTO_CONTROL				0x10
+#define UVC_PU_ANALOG_VIDEO_STANDARD_CONTROL		0x11
+#define UVC_PU_ANALOG_LOCK_STATUS_CONTROL		0x12
+
+/* A.9.7. VideoStreaming Interface Control Selectors */
+#define UVC_VS_CONTROL_UNDEFINED			0x00
+#define UVC_VS_PROBE_CONTROL				0x01
+#define UVC_VS_COMMIT_CONTROL				0x02
+#define UVC_VS_STILL_PROBE_CONTROL			0x03
+#define UVC_VS_STILL_COMMIT_CONTROL			0x04
+#define UVC_VS_STILL_IMAGE_TRIGGER_CONTROL		0x05
+#define UVC_VS_STREAM_ERROR_CODE_CONTROL		0x06
+#define UVC_VS_GENERATE_KEY_FRAME_CONTROL		0x07
+#define UVC_VS_UPDATE_FRAME_SEGMENT_CONTROL		0x08
+#define UVC_VS_SYNC_DELAY_CONTROL			0x09
+
+/* B.1. USB Terminal Types */
+#define UVC_TT_VENDOR_SPECIFIC				0x0100
+#define UVC_TT_STREAMING				0x0101
+
+/* B.2. Input Terminal Types */
+#define UVC_ITT_VENDOR_SPECIFIC				0x0200
+#define UVC_ITT_CAMERA					0x0201
+#define UVC_ITT_MEDIA_TRANSPORT_INPUT			0x0202
+
+/* B.3. Output Terminal Types */
+#define UVC_OTT_VENDOR_SPECIFIC				0x0300
+#define UVC_OTT_DISPLAY					0x0301
+#define UVC_OTT_MEDIA_TRANSPORT_OUTPUT			0x0302
+
+/* B.4. External Terminal Types */
+#define UVC_EXTERNAL_VENDOR_SPECIFIC			0x0400
+#define UVC_COMPOSITE_CONNECTOR				0x0401
+#define UVC_SVIDEO_CONNECTOR				0x0402
+#define UVC_COMPONENT_CONNECTOR				0x0403
+
+/* 2.4.2.2. Status Packet Type */
+#define UVC_STATUS_TYPE_CONTROL				1
+#define UVC_STATUS_TYPE_STREAMING			2
+
+/* 2.4.3.3. Payload Header Information */
+#define UVC_STREAM_EOH					(1 << 7)
+#define UVC_STREAM_ERR					(1 << 6)
+#define UVC_STREAM_STI					(1 << 5)
+#define UVC_STREAM_RES					(1 << 4)
+#define UVC_STREAM_SCR					(1 << 3)
+#define UVC_STREAM_PTS					(1 << 2)
+#define UVC_STREAM_EOF					(1 << 1)
+#define UVC_STREAM_FID					(1 << 0)
+
+/* 4.1.2. Control Capabilities */
+#define UVC_CONTROL_CAP_GET				(1 << 0)
+#define UVC_CONTROL_CAP_SET				(1 << 1)
+#define UVC_CONTROL_CAP_DISABLED			(1 << 2)
+#define UVC_CONTROL_CAP_AUTOUPDATE			(1 << 3)
+#define UVC_CONTROL_CAP_ASYNCHRONOUS			(1 << 4)
+
+/* ------------------------------------------------------------------------
+ * UVC structures
+ */
+
+/* All UVC descriptors have these 3 fields at the beginning */
+struct uvc_descriptor_header {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+} __attribute__((packed));
+
+/* 3.7.2. Video Control Interface Header Descriptor */
+struct uvc_header_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u16 bcdUVC;
+	__u16 wTotalLength;
+	__u32 dwClockFrequency;
+	__u8  bInCollection;
+	__u8  baInterfaceNr[];
+} __attribute__((__packed__));
+
+#define UVC_DT_HEADER_SIZE(n)				(12+(n))
+
+#define UVC_HEADER_DESCRIPTOR(n) \
+	uvc_header_descriptor_##n
+
+#define DECLARE_UVC_HEADER_DESCRIPTOR(n)		\
+struct UVC_HEADER_DESCRIPTOR(n) {			\
+	__u8  bLength;					\
+	__u8  bDescriptorType;				\
+	__u8  bDescriptorSubType;			\
+	__u16 bcdUVC;					\
+	__u16 wTotalLength;				\
+	__u32 dwClockFrequency;				\
+	__u8  bInCollection;				\
+	__u8  baInterfaceNr[n];				\
+} __attribute__ ((packed))
+
+/* 3.7.2.1. Input Terminal Descriptor */
+struct uvc_input_terminal_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bTerminalID;
+	__u16 wTerminalType;
+	__u8  bAssocTerminal;
+	__u8  iTerminal;
+} __attribute__((__packed__));
+
+#define UVC_DT_INPUT_TERMINAL_SIZE			8
+
+/* 3.7.2.2. Output Terminal Descriptor */
+struct uvc_output_terminal_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bTerminalID;
+	__u16 wTerminalType;
+	__u8  bAssocTerminal;
+	__u8  bSourceID;
+	__u8  iTerminal;
+} __attribute__((__packed__));
+
+#define UVC_DT_OUTPUT_TERMINAL_SIZE			9
+
+/* 3.7.2.3. Camera Terminal Descriptor */
+struct uvc_camera_terminal_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bTerminalID;
+	__u16 wTerminalType;
+	__u8  bAssocTerminal;
+	__u8  iTerminal;
+	__u16 wObjectiveFocalLengthMin;
+	__u16 wObjectiveFocalLengthMax;
+	__u16 wOcularFocalLength;
+	__u8  bControlSize;
+	__u8  bmControls[3];
+} __attribute__((__packed__));
+
+#define UVC_DT_CAMERA_TERMINAL_SIZE(n)			(15+(n))
+
+/* 3.7.2.4. Selector Unit Descriptor */
+struct uvc_selector_unit_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bUnitID;
+	__u8  bNrInPins;
+	__u8  baSourceID[0];
+	__u8  iSelector;
+} __attribute__((__packed__));
+
+#define UVC_DT_SELECTOR_UNIT_SIZE(n)			(6+(n))
+
+#define UVC_SELECTOR_UNIT_DESCRIPTOR(n)	\
+	uvc_selector_unit_descriptor_##n
+
+#define DECLARE_UVC_SELECTOR_UNIT_DESCRIPTOR(n)	\
+struct UVC_SELECTOR_UNIT_DESCRIPTOR(n) {		\
+	__u8  bLength;					\
+	__u8  bDescriptorType;				\
+	__u8  bDescriptorSubType;			\
+	__u8  bUnitID;					\
+	__u8  bNrInPins;				\
+	__u8  baSourceID[n];				\
+	__u8  iSelector;				\
+} __attribute__ ((packed))
+
+/* 3.7.2.5. Processing Unit Descriptor */
+struct uvc_processing_unit_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bUnitID;
+	__u8  bSourceID;
+	__u16 wMaxMultiplier;
+	__u8  bControlSize;
+	__u8  bmControls[2];
+	__u8  iProcessing;
+} __attribute__((__packed__));
+
+#define UVC_DT_PROCESSING_UNIT_SIZE(n)			(9+(n))
+
+/* 3.7.2.6. Extension Unit Descriptor */
+struct uvc_extension_unit_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bUnitID;
+	__u8  guidExtensionCode[16];
+	__u8  bNumControls;
+	__u8  bNrInPins;
+	__u8  baSourceID[0];
+	__u8  bControlSize;
+	__u8  bmControls[0];
+	__u8  iExtension;
+} __attribute__((__packed__));
+
+#define UVC_DT_EXTENSION_UNIT_SIZE(p, n)		(24+(p)+(n))
+
+#define UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) \
+	uvc_extension_unit_descriptor_##p_##n
+
+#define DECLARE_UVC_EXTENSION_UNIT_DESCRIPTOR(p, n)	\
+struct UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) {		\
+	__u8  bLength;					\
+	__u8  bDescriptorType;				\
+	__u8  bDescriptorSubType;			\
+	__u8  bUnitID;					\
+	__u8  guidExtensionCode[16];			\
+	__u8  bNumControls;				\
+	__u8  bNrInPins;				\
+	__u8  baSourceID[p];				\
+	__u8  bControlSize;				\
+	__u8  bmControls[n];				\
+	__u8  iExtension;				\
+} __attribute__ ((packed))
+
+/* 3.8.2.2. Video Control Interrupt Endpoint Descriptor */
+struct uvc_control_endpoint_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u16 wMaxTransferSize;
+} __attribute__((__packed__));
+
+#define UVC_DT_CONTROL_ENDPOINT_SIZE			5
+
+/* 3.9.2.1. Input Header Descriptor */
+struct uvc_input_header_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bNumFormats;
+	__u16 wTotalLength;
+	__u8  bEndpointAddress;
+	__u8  bmInfo;
+	__u8  bTerminalLink;
+	__u8  bStillCaptureMethod;
+	__u8  bTriggerSupport;
+	__u8  bTriggerUsage;
+	__u8  bControlSize;
+	__u8  bmaControls[];
+} __attribute__((__packed__));
+
+#define UVC_DT_INPUT_HEADER_SIZE(n, p)			(13+(n*p))
+
+#define UVC_INPUT_HEADER_DESCRIPTOR(n, p) \
+	uvc_input_header_descriptor_##n_##p
+
+#define DECLARE_UVC_INPUT_HEADER_DESCRIPTOR(n, p)	\
+struct UVC_INPUT_HEADER_DESCRIPTOR(n, p) {		\
+	__u8  bLength;					\
+	__u8  bDescriptorType;				\
+	__u8  bDescriptorSubType;			\
+	__u8  bNumFormats;				\
+	__u16 wTotalLength;				\
+	__u8  bEndpointAddress;				\
+	__u8  bmInfo;					\
+	__u8  bTerminalLink;				\
+	__u8  bStillCaptureMethod;			\
+	__u8  bTriggerSupport;				\
+	__u8  bTriggerUsage;				\
+	__u8  bControlSize;				\
+	__u8  bmaControls[p][n];			\
+} __attribute__ ((packed))
+
+/* 3.9.2.2. Output Header Descriptor */
+struct uvc_output_header_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bNumFormats;
+	__u16 wTotalLength;
+	__u8  bEndpointAddress;
+	__u8  bTerminalLink;
+	__u8  bControlSize;
+	__u8  bmaControls[];
+} __attribute__((__packed__));
+
+#define UVC_DT_OUTPUT_HEADER_SIZE(n, p)			(9+(n*p))
+
+#define UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) \
+	uvc_output_header_descriptor_##n_##p
+
+#define DECLARE_UVC_OUTPUT_HEADER_DESCRIPTOR(n, p)	\
+struct UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) {		\
+	__u8  bLength;					\
+	__u8  bDescriptorType;				\
+	__u8  bDescriptorSubType;			\
+	__u8  bNumFormats;				\
+	__u16 wTotalLength;				\
+	__u8  bEndpointAddress;				\
+	__u8  bTerminalLink;				\
+	__u8  bControlSize;				\
+	__u8  bmaControls[p][n];			\
+} __attribute__ ((packed))
+
+/* 3.9.2.6. Color matching descriptor */
+struct uvc_color_matching_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bColorPrimaries;
+	__u8  bTransferCharacteristics;
+	__u8  bMatrixCoefficients;
+} __attribute__((__packed__));
+
+#define UVC_DT_COLOR_MATCHING_SIZE			6
+
+/* 4.3.1.1. Video Probe and Commit Controls */
+struct uvc_streaming_control {
+	__u16 bmHint;
+	__u8  bFormatIndex;
+	__u8  bFrameIndex;
+	__u32 dwFrameInterval;
+	__u16 wKeyFrameRate;
+	__u16 wPFrameRate;
+	__u16 wCompQuality;
+	__u16 wCompWindowSize;
+	__u16 wDelay;
+	__u32 dwMaxVideoFrameSize;
+	__u32 dwMaxPayloadTransferSize;
+	__u32 dwClockFrequency;
+	__u8  bmFramingInfo;
+	__u8  bPreferedVersion;
+	__u8  bMinVersion;
+	__u8  bMaxVersion;
+} __attribute__((__packed__));
+
+/* Uncompressed Payload - 3.1.1. Uncompressed Video Format Descriptor */
+struct uvc_format_uncompressed {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bFormatIndex;
+	__u8  bNumFrameDescriptors;
+	__u8  guidFormat[16];
+	__u8  bBitsPerPixel;
+	__u8  bDefaultFrameIndex;
+	__u8  bAspectRatioX;
+	__u8  bAspectRatioY;
+	__u8  bmInterfaceFlags;
+	__u8  bCopyProtect;
+} __attribute__((__packed__));
+
+#define UVC_DT_FORMAT_UNCOMPRESSED_SIZE			27
+
+/* Uncompressed Payload - 3.1.2. Uncompressed Video Frame Descriptor */
+struct uvc_frame_uncompressed {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bFrameIndex;
+	__u8  bmCapabilities;
+	__u16 wWidth;
+	__u16 wHeight;
+	__u32 dwMinBitRate;
+	__u32 dwMaxBitRate;
+	__u32 dwMaxVideoFrameBufferSize;
+	__u32 dwDefaultFrameInterval;
+	__u8  bFrameIntervalType;
+	__u32 dwFrameInterval[];
+} __attribute__((__packed__));
+
+#define UVC_DT_FRAME_UNCOMPRESSED_SIZE(n)		(26+4*(n))
+
+#define UVC_FRAME_UNCOMPRESSED(n) \
+	uvc_frame_uncompressed_##n
+
+#define DECLARE_UVC_FRAME_UNCOMPRESSED(n)		\
+struct UVC_FRAME_UNCOMPRESSED(n) {			\
+	__u8  bLength;					\
+	__u8  bDescriptorType;				\
+	__u8  bDescriptorSubType;			\
+	__u8  bFrameIndex;				\
+	__u8  bmCapabilities;				\
+	__u16 wWidth;					\
+	__u16 wHeight;					\
+	__u32 dwMinBitRate;				\
+	__u32 dwMaxBitRate;				\
+	__u32 dwMaxVideoFrameBufferSize;		\
+	__u32 dwDefaultFrameInterval;			\
+	__u8  bFrameIntervalType;			\
+	__u32 dwFrameInterval[n];			\
+} __attribute__ ((packed))
+
+/* MJPEG Payload - 3.1.1. MJPEG Video Format Descriptor */
+struct uvc_format_mjpeg {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bFormatIndex;
+	__u8  bNumFrameDescriptors;
+	__u8  bmFlags;
+	__u8  bDefaultFrameIndex;
+	__u8  bAspectRatioX;
+	__u8  bAspectRatioY;
+	__u8  bmInterfaceFlags;
+	__u8  bCopyProtect;
+} __attribute__((__packed__));
+
+#define UVC_DT_FORMAT_MJPEG_SIZE			11
+
+/* MJPEG Payload - 3.1.2. MJPEG Video Frame Descriptor */
+struct uvc_frame_mjpeg {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bFrameIndex;
+	__u8  bmCapabilities;
+	__u16 wWidth;
+	__u16 wHeight;
+	__u32 dwMinBitRate;
+	__u32 dwMaxBitRate;
+	__u32 dwMaxVideoFrameBufferSize;
+	__u32 dwDefaultFrameInterval;
+	__u8  bFrameIntervalType;
+	__u32 dwFrameInterval[];
+} __attribute__((__packed__));
+
+#define UVC_DT_FRAME_MJPEG_SIZE(n)			(26+4*(n))
+
+#define UVC_FRAME_MJPEG(n) \
+	uvc_frame_mjpeg_##n
+
+#define DECLARE_UVC_FRAME_MJPEG(n)			\
+struct UVC_FRAME_MJPEG(n) {				\
+	__u8  bLength;					\
+	__u8  bDescriptorType;				\
+	__u8  bDescriptorSubType;			\
+	__u8  bFrameIndex;				\
+	__u8  bmCapabilities;				\
+	__u16 wWidth;					\
+	__u16 wHeight;					\
+	__u32 dwMinBitRate;				\
+	__u32 dwMaxBitRate;				\
+	__u32 dwMaxVideoFrameBufferSize;		\
+	__u32 dwDefaultFrameInterval;			\
+	__u8  bFrameIntervalType;			\
+	__u32 dwFrameInterval[n];			\
+} __attribute__ ((packed))
+
+#endif /* __LINUX_USB_VIDEO_H */
+
diff --git a/include/linux/usb/wusb-wa.h b/include/linux/usb/wusb-wa.h
new file mode 100644
index 00000000..f9dec37f
--- /dev/null
+++ b/include/linux/usb/wusb-wa.h
@@ -0,0 +1,272 @@
+/*
+ * Wireless USB Wire Adapter constants and structures.
+ *
+ * Copyright (C) 2005-2006 Intel Corporation.
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ * FIXME: organize properly, group logically
+ *
+ * All the event structures are defined in uwb/spec.h, as they are
+ * common to the WHCI and WUSB radio control interfaces.
+ *
+ * References:
+ *   [WUSB] Wireless Universal Serial Bus Specification, revision 1.0, ch8
+ */
+#ifndef __LINUX_USB_WUSB_WA_H
+#define __LINUX_USB_WUSB_WA_H
+
+/**
+ * Radio Command Request for the Radio Control Interface
+ *
+ * Radio Control Interface command and event codes are the same as
+ * WHCI, and listed in include/linux/uwb.h:UWB_RC_{CMD,EVT}_*
+ */
+enum {
+	WA_EXEC_RC_CMD = 40,	/* Radio Control command Request */
+};
+
+/* Wireless Adapter Requests ([WUSB] table 8-51) */
+enum {
+	WUSB_REQ_ADD_MMC_IE     = 20,
+	WUSB_REQ_REMOVE_MMC_IE  = 21,
+	WUSB_REQ_SET_NUM_DNTS   = 22,
+	WUSB_REQ_SET_CLUSTER_ID = 23,
+	WUSB_REQ_SET_DEV_INFO   = 24,
+	WUSB_REQ_GET_TIME       = 25,
+	WUSB_REQ_SET_STREAM_IDX = 26,
+	WUSB_REQ_SET_WUSB_MAS   = 27,
+	WUSB_REQ_CHAN_STOP      = 28,
+};
+
+
+/* Wireless Adapter WUSB Channel Time types ([WUSB] table 8-52) */
+enum {
+	WUSB_TIME_ADJ   = 0,
+	WUSB_TIME_BPST  = 1,
+	WUSB_TIME_WUSB  = 2,
+};
+
+enum {
+	WA_ENABLE = 0x01,
+	WA_RESET = 0x02,
+	RPIPE_PAUSE = 0x1,
+};
+
+/* Responses from Get Status request ([WUSB] section 8.3.1.6) */
+enum {
+	WA_STATUS_ENABLED = 0x01,
+	WA_STATUS_RESETTING = 0x02
+};
+
+enum rpipe_crs {
+	RPIPE_CRS_CTL = 0x01,
+	RPIPE_CRS_ISO = 0x02,
+	RPIPE_CRS_BULK = 0x04,
+	RPIPE_CRS_INTR = 0x08
+};
+
+/**
+ * RPipe descriptor ([WUSB] section 8.5.2.11)
+ *
+ * FIXME: explain rpipes
+ */
+struct usb_rpipe_descriptor {
+	u8	bLength;
+	u8	bDescriptorType;
+	__le16  wRPipeIndex;
+	__le16	wRequests;
+	__le16	wBlocks;		/* rw if 0 */
+	__le16	wMaxPacketSize;		/* rw? */
+	u8	bHSHubAddress;		/* reserved: 0 */
+	u8	bHSHubPort;		/* ??? FIXME ??? */
+	u8	bSpeed;			/* rw: xfer rate 'enum uwb_phy_rate' */
+	u8	bDeviceAddress;		/* rw: Target device address */
+	u8	bEndpointAddress;	/* rw: Target EP address */
+	u8	bDataSequence;		/* ro: Current Data sequence */
+	__le32	dwCurrentWindow;	/* ro */
+	u8	bMaxDataSequence;	/* ro?: max supported seq */
+	u8	bInterval;		/* rw:  */
+	u8	bOverTheAirInterval;	/* rw:  */
+	u8	bmAttribute;		/* ro?  */
+	u8	bmCharacteristics;	/* ro? enum rpipe_attr, supported xsactions */
+	u8	bmRetryOptions;		/* rw? */
+	__le16	wNumTransactionErrors;	/* rw */
+} __attribute__ ((packed));
+
+/**
+ * Wire Adapter Notification types ([WUSB] sections 8.4.5 & 8.5.4)
+ *
+ * These are the notifications coming on the notification endpoint of
+ * an HWA and a DWA.
+ */
+enum wa_notif_type {
+	DWA_NOTIF_RWAKE = 0x91,
+	DWA_NOTIF_PORTSTATUS = 0x92,
+	WA_NOTIF_TRANSFER = 0x93,
+	HWA_NOTIF_BPST_ADJ = 0x94,
+	HWA_NOTIF_DN = 0x95,
+};
+
+/**
+ * Wire Adapter notification header
+ *
+ * Notifications coming from a wire adapter use a common header
+ * defined in [WUSB] sections 8.4.5 & 8.5.4.
+ */
+struct wa_notif_hdr {
+	u8 bLength;
+	u8 bNotifyType;			/* enum wa_notif_type */
+} __attribute__((packed));
+
+/**
+ * HWA DN Received notification [(WUSB] section 8.5.4.2)
+ *
+ * The DNData is specified in WUSB1.0[7.6]. For each device
+ * notification we received, we just need to dispatch it.
+ *
+ * @dndata:  this is really an array of notifications, but all start
+ *           with the same header.
+ */
+struct hwa_notif_dn {
+	struct wa_notif_hdr hdr;
+	u8 bSourceDeviceAddr;		/* from errata 2005/07 */
+	u8 bmAttributes;
+	struct wusb_dn_hdr dndata[];
+} __attribute__((packed));
+
+/* [WUSB] section 8.3.3 */
+enum wa_xfer_type {
+	WA_XFER_TYPE_CTL = 0x80,
+	WA_XFER_TYPE_BI = 0x81,		/* bulk/interrupt */
+	WA_XFER_TYPE_ISO = 0x82,
+	WA_XFER_RESULT = 0x83,
+	WA_XFER_ABORT = 0x84,
+};
+
+/* [WUSB] section 8.3.3 */
+struct wa_xfer_hdr {
+	u8 bLength;			/* 0x18 */
+	u8 bRequestType;		/* 0x80 WA_REQUEST_TYPE_CTL */
+	__le16 wRPipe;			/* RPipe index */
+	__le32 dwTransferID;		/* Host-assigned ID */
+	__le32 dwTransferLength;	/* Length of data to xfer */
+	u8 bTransferSegment;
+} __attribute__((packed));
+
+struct wa_xfer_ctl {
+	struct wa_xfer_hdr hdr;
+	u8 bmAttribute;
+	__le16 wReserved;
+	struct usb_ctrlrequest baSetupData;
+} __attribute__((packed));
+
+struct wa_xfer_bi {
+	struct wa_xfer_hdr hdr;
+	u8 bReserved;
+	__le16 wReserved;
+} __attribute__((packed));
+
+struct wa_xfer_hwaiso {
+	struct wa_xfer_hdr hdr;
+	u8 bReserved;
+	__le16 wPresentationTime;
+	__le32 dwNumOfPackets;
+	/* FIXME: u8 pktdata[]? */
+} __attribute__((packed));
+
+/* [WUSB] section 8.3.3.5 */
+struct wa_xfer_abort {
+	u8 bLength;
+	u8 bRequestType;
+	__le16 wRPipe;			/* RPipe index */
+	__le32 dwTransferID;		/* Host-assigned ID */
+} __attribute__((packed));
+
+/**
+ * WA Transfer Complete notification ([WUSB] section 8.3.3.3)
+ *
+ */
+struct wa_notif_xfer {
+	struct wa_notif_hdr hdr;
+	u8 bEndpoint;
+	u8 Reserved;
+} __attribute__((packed));
+
+/** Transfer result basic codes [WUSB] table 8-15 */
+enum {
+	WA_XFER_STATUS_SUCCESS,
+	WA_XFER_STATUS_HALTED,
+	WA_XFER_STATUS_DATA_BUFFER_ERROR,
+	WA_XFER_STATUS_BABBLE,
+	WA_XFER_RESERVED,
+	WA_XFER_STATUS_NOT_FOUND,
+	WA_XFER_STATUS_INSUFFICIENT_RESOURCE,
+	WA_XFER_STATUS_TRANSACTION_ERROR,
+	WA_XFER_STATUS_ABORTED,
+	WA_XFER_STATUS_RPIPE_NOT_READY,
+	WA_XFER_INVALID_FORMAT,
+	WA_XFER_UNEXPECTED_SEGMENT_NUMBER,
+	WA_XFER_STATUS_RPIPE_TYPE_MISMATCH,
+};
+
+/** [WUSB] section 8.3.3.4 */
+struct wa_xfer_result {
+	struct wa_notif_hdr hdr;
+	__le32 dwTransferID;
+	__le32 dwTransferLength;
+	u8     bTransferSegment;
+	u8     bTransferStatus;
+	__le32 dwNumOfPackets;
+} __attribute__((packed));
+
+/**
+ * Wire Adapter Class Descriptor ([WUSB] section 8.5.2.7).
+ *
+ * NOTE: u16 fields are read Little Endian from the hardware.
+ *
+ * @bNumPorts is the original max number of devices that the host can
+ *            connect; we might chop this so the stack can handle
+ *            it. In case you need to access it, use wusbhc->ports_max
+ *            if it is a Wireless USB WA.
+ */
+struct usb_wa_descriptor {
+	u8	bLength;
+	u8	bDescriptorType;
+	u16	bcdWAVersion;
+	u8	bNumPorts;		/* don't use!! */
+	u8	bmAttributes;		/* Reserved == 0 */
+	u16	wNumRPipes;
+	u16	wRPipeMaxBlock;
+	u8	bRPipeBlockSize;
+	u8	bPwrOn2PwrGood;
+	u8	bNumMMCIEs;
+	u8	DeviceRemovable;	/* FIXME: in DWA this is up to 16 bytes */
+} __attribute__((packed));
+
+/**
+ * HWA Device Information Buffer (WUSB1.0[T8.54])
+ */
+struct hwa_dev_info {
+	u8	bmDeviceAvailability[32];       /* FIXME: ignored for now */
+	u8	bDeviceAddress;
+	__le16	wPHYRates;
+	u8	bmDeviceAttribute;
+} __attribute__((packed));
+
+#endif /* #ifndef __LINUX_USB_WUSB_WA_H */
diff --git a/include/linux/usb/wusb.h b/include/linux/usb/wusb.h
new file mode 100644
index 00000000..0c4d4ca3
--- /dev/null
+++ b/include/linux/usb/wusb.h
@@ -0,0 +1,375 @@
+/*
+ * Wireless USB Standard Definitions
+ * Event Size Tables
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ * FIXME: organize properly, group logically
+ *
+ * All the event structures are defined in uwb/spec.h, as they are
+ * common to the WHCI and WUSB radio control interfaces.
+ */
+
+#ifndef __WUSB_H__
+#define __WUSB_H__
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/uwb/spec.h>
+#include <linux/usb/ch9.h>
+#include <linux/param.h>
+
+/**
+ * WUSB Information Element header
+ *
+ * I don't know why, they decided to make it different to the MBOA MAC
+ * IE Header; beats me.
+ */
+struct wuie_hdr {
+	u8 bLength;
+	u8 bIEIdentifier;
+} __attribute__((packed));
+
+enum {
+	WUIE_ID_WCTA = 0x80,
+	WUIE_ID_CONNECTACK,
+	WUIE_ID_HOST_INFO,
+	WUIE_ID_CHANGE_ANNOUNCE,
+	WUIE_ID_DEVICE_DISCONNECT,
+	WUIE_ID_HOST_DISCONNECT,
+	WUIE_ID_KEEP_ALIVE = 0x89,
+	WUIE_ID_ISOCH_DISCARD,
+	WUIE_ID_RESET_DEVICE,
+};
+
+/**
+ * Maximum number of array elements in a WUSB IE.
+ *
+ * WUSB1.0[7.5 before table 7-38] says that in WUSB IEs that
+ * are "arrays" have to limited to 4 elements. So we define it
+ * like that to ease up and submit only the neeed size.
+ */
+#define WUIE_ELT_MAX 4
+
+/**
+ * Wrapper for the data that defines a CHID, a CDID or a CK
+ *
+ * WUSB defines that CHIDs, CDIDs and CKs are a 16 byte string of
+ * data. In order to avoid confusion and enforce types, we wrap it.
+ *
+ * Make it packed, as we use it in some hw definitions.
+ */
+struct wusb_ckhdid {
+	u8 data[16];
+} __attribute__((packed));
+
+static const struct wusb_ckhdid wusb_ckhdid_zero = { .data = { 0 } };
+
+#define WUSB_CKHDID_STRSIZE (3 * sizeof(struct wusb_ckhdid) + 1)
+
+/**
+ * WUSB IE: Host Information (WUSB1.0[7.5.2])
+ *
+ * Used to provide information about the host to the Wireless USB
+ * devices in range (CHID can be used as an ASCII string).
+ */
+struct wuie_host_info {
+	struct wuie_hdr hdr;
+	__le16 attributes;
+	struct wusb_ckhdid CHID;
+} __attribute__((packed));
+
+/**
+ * WUSB IE: Connect Ack (WUSB1.0[7.5.1])
+ *
+ * Used to acknowledge device connect requests. See note for
+ * WUIE_ELT_MAX.
+ */
+struct wuie_connect_ack {
+	struct wuie_hdr hdr;
+	struct {
+		struct wusb_ckhdid CDID;
+		u8 bDeviceAddress;	/* 0 means unused */
+		u8 bReserved;
+	} blk[WUIE_ELT_MAX];
+} __attribute__((packed));
+
+/**
+ * WUSB IE Host Information Element, Connect Availability
+ *
+ * WUSB1.0[7.5.2], bmAttributes description
+ */
+enum {
+	WUIE_HI_CAP_RECONNECT = 0,
+	WUIE_HI_CAP_LIMITED,
+	WUIE_HI_CAP_RESERVED,
+	WUIE_HI_CAP_ALL,
+};
+
+/**
+ * WUSB IE: Channel Stop (WUSB1.0[7.5.8])
+ *
+ * Tells devices the host is going to stop sending MMCs and will disappear.
+ */
+struct wuie_channel_stop {
+	struct wuie_hdr hdr;
+	u8 attributes;
+	u8 timestamp[3];
+} __attribute__((packed));
+
+/**
+ * WUSB IE: Keepalive (WUSB1.0[7.5.9])
+ *
+ * Ask device(s) to send keepalives.
+ */
+struct wuie_keep_alive {
+	struct wuie_hdr hdr;
+	u8 bDeviceAddress[WUIE_ELT_MAX];
+} __attribute__((packed));
+
+/**
+ * WUSB IE: Reset device (WUSB1.0[7.5.11])
+ *
+ * Tell device to reset; in all truth, we can fit 4 CDIDs, but we only
+ * use it for one at the time...
+ *
+ * In any case, this request is a wee bit silly: why don't they target
+ * by address??
+ */
+struct wuie_reset {
+	struct wuie_hdr hdr;
+	struct wusb_ckhdid CDID;
+} __attribute__((packed));
+
+/**
+ * WUSB IE: Disconnect device (WUSB1.0[7.5.11])
+ *
+ * Tell device to disconnect; we can fit 4 addresses, but we only use
+ * it for one at the time...
+ */
+struct wuie_disconnect {
+	struct wuie_hdr hdr;
+	u8 bDeviceAddress;
+	u8 padding;
+} __attribute__((packed));
+
+/**
+ * WUSB IE: Host disconnect ([WUSB] section 7.5.5)
+ *
+ * Tells all connected devices to disconnect.
+ */
+struct wuie_host_disconnect {
+	struct wuie_hdr hdr;
+} __attribute__((packed));
+
+/**
+ * WUSB Device Notification header (WUSB1.0[7.6])
+ */
+struct wusb_dn_hdr {
+	u8 bType;
+	u8 notifdata[];
+} __attribute__((packed));
+
+/** Device Notification codes (WUSB1.0[Table 7-54]) */
+enum WUSB_DN {
+	WUSB_DN_CONNECT = 0x01,
+	WUSB_DN_DISCONNECT = 0x02,
+	WUSB_DN_EPRDY = 0x03,
+	WUSB_DN_MASAVAILCHANGED = 0x04,
+	WUSB_DN_RWAKE = 0x05,
+	WUSB_DN_SLEEP = 0x06,
+	WUSB_DN_ALIVE = 0x07,
+};
+
+/** WUSB Device Notification Connect */
+struct wusb_dn_connect {
+	struct wusb_dn_hdr hdr;
+	__le16 attributes;
+	struct wusb_ckhdid CDID;
+} __attribute__((packed));
+
+static inline int wusb_dn_connect_prev_dev_addr(const struct wusb_dn_connect *dn)
+{
+	return le16_to_cpu(dn->attributes) & 0xff;
+}
+
+static inline int wusb_dn_connect_new_connection(const struct wusb_dn_connect *dn)
+{
+	return (le16_to_cpu(dn->attributes) >> 8) & 0x1;
+}
+
+static inline int wusb_dn_connect_beacon_behavior(const struct wusb_dn_connect *dn)
+{
+	return (le16_to_cpu(dn->attributes) >> 9) & 0x03;
+}
+
+/** Device is alive (aka: pong) (WUSB1.0[7.6.7]) */
+struct wusb_dn_alive {
+	struct wusb_dn_hdr hdr;
+} __attribute__((packed));
+
+/** Device is disconnecting (WUSB1.0[7.6.2]) */
+struct wusb_dn_disconnect {
+	struct wusb_dn_hdr hdr;
+} __attribute__((packed));
+
+/* General constants */
+enum {
+	WUSB_TRUST_TIMEOUT_MS = 4000,	/* [WUSB] section 4.15.1 */
+};
+
+static inline size_t ckhdid_printf(char *pr_ckhdid, size_t size,
+				   const struct wusb_ckhdid *ckhdid)
+{
+	return scnprintf(pr_ckhdid, size,
+			 "%02hx %02hx %02hx %02hx %02hx %02hx %02hx %02hx "
+			 "%02hx %02hx %02hx %02hx %02hx %02hx %02hx %02hx",
+			 ckhdid->data[0],  ckhdid->data[1],
+			 ckhdid->data[2],  ckhdid->data[3],
+			 ckhdid->data[4],  ckhdid->data[5],
+			 ckhdid->data[6],  ckhdid->data[7],
+			 ckhdid->data[8],  ckhdid->data[9],
+			 ckhdid->data[10], ckhdid->data[11],
+			 ckhdid->data[12], ckhdid->data[13],
+			 ckhdid->data[14], ckhdid->data[15]);
+}
+
+/*
+ * WUSB Crypto stuff (WUSB1.0[6])
+ */
+
+extern const char *wusb_et_name(u8);
+
+/**
+ * WUSB key index WUSB1.0[7.3.2.4], for usage when setting keys for
+ * the host or the device.
+ */
+static inline u8 wusb_key_index(int index, int type, int originator)
+{
+	return (originator << 6) | (type << 4) | index;
+}
+
+#define WUSB_KEY_INDEX_TYPE_PTK			0 /* for HWA only */
+#define WUSB_KEY_INDEX_TYPE_ASSOC		1
+#define WUSB_KEY_INDEX_TYPE_GTK			2
+#define WUSB_KEY_INDEX_ORIGINATOR_HOST		0
+#define WUSB_KEY_INDEX_ORIGINATOR_DEVICE	1
+
+/* A CCM Nonce, defined in WUSB1.0[6.4.1] */
+struct aes_ccm_nonce {
+	u8 sfn[6];              /* Little Endian */
+	u8 tkid[3];             /* LE */
+	struct uwb_dev_addr dest_addr;
+	struct uwb_dev_addr src_addr;
+} __attribute__((packed));
+
+/* A CCM operation label, defined on WUSB1.0[6.5.x] */
+struct aes_ccm_label {
+	u8 data[14];
+} __attribute__((packed));
+
+/*
+ * Input to the key derivation sequence defined in
+ * WUSB1.0[6.5.1]. Rest of the data is in the CCM Nonce passed to the
+ * PRF function.
+ */
+struct wusb_keydvt_in {
+	u8 hnonce[16];
+	u8 dnonce[16];
+} __attribute__((packed));
+
+/*
+ * Output from the key derivation sequence defined in
+ * WUSB1.0[6.5.1].
+ */
+struct wusb_keydvt_out {
+	u8 kck[16];
+	u8 ptk[16];
+} __attribute__((packed));
+
+/* Pseudo Random Function WUSB1.0[6.5] */
+extern int wusb_crypto_init(void);
+extern void wusb_crypto_exit(void);
+extern ssize_t wusb_prf(void *out, size_t out_size,
+			const u8 key[16], const struct aes_ccm_nonce *_n,
+			const struct aes_ccm_label *a,
+			const void *b, size_t blen, size_t len);
+
+static inline int wusb_prf_64(void *out, size_t out_size, const u8 key[16],
+			      const struct aes_ccm_nonce *n,
+			      const struct aes_ccm_label *a,
+			      const void *b, size_t blen)
+{
+	return wusb_prf(out, out_size, key, n, a, b, blen, 64);
+}
+
+static inline int wusb_prf_128(void *out, size_t out_size, const u8 key[16],
+			       const struct aes_ccm_nonce *n,
+			       const struct aes_ccm_label *a,
+			       const void *b, size_t blen)
+{
+	return wusb_prf(out, out_size, key, n, a, b, blen, 128);
+}
+
+static inline int wusb_prf_256(void *out, size_t out_size, const u8 key[16],
+			       const struct aes_ccm_nonce *n,
+			       const struct aes_ccm_label *a,
+			       const void *b, size_t blen)
+{
+	return wusb_prf(out, out_size, key, n, a, b, blen, 256);
+}
+
+/* Key derivation WUSB1.0[6.5.1] */
+static inline int wusb_key_derive(struct wusb_keydvt_out *keydvt_out,
+				  const u8 key[16],
+				  const struct aes_ccm_nonce *n,
+				  const struct wusb_keydvt_in *keydvt_in)
+{
+	const struct aes_ccm_label a = { .data = "Pair-wise keys" };
+	return wusb_prf_256(keydvt_out, sizeof(*keydvt_out), key, n, &a,
+			    keydvt_in, sizeof(*keydvt_in));
+}
+
+/*
+ * Out-of-band MIC Generation WUSB1.0[6.5.2]
+ *
+ * Compute the MIC over @key, @n and @hs and place it in @mic_out.
+ *
+ * @mic_out:  Where to place the 8 byte MIC tag
+ * @key:      KCK from the derivation process
+ * @n:        CCM nonce, n->sfn == 0, TKID as established in the
+ *            process.
+ * @hs:       Handshake struct for phase 2 of the 4-way.
+ *            hs->bStatus and hs->bReserved are zero.
+ *            hs->bMessageNumber is 2 (WUSB1.0[7.3.2.5.2]
+ *            hs->dest_addr is the device's USB address padded with 0
+ *            hs->src_addr is the hosts's UWB device address
+ *            hs->mic is ignored (as we compute that value).
+ */
+static inline int wusb_oob_mic(u8 mic_out[8], const u8 key[16],
+			       const struct aes_ccm_nonce *n,
+			       const struct usb_handshake *hs)
+{
+	const struct aes_ccm_label a = { .data = "out-of-bandMIC" };
+	return wusb_prf_64(mic_out, 8, key, n, &a,
+			   hs, sizeof(*hs) - sizeof(hs->MIC));
+}
+
+#endif /* #ifndef __WUSB_H__ */
diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h
new file mode 100644
index 00000000..17df3600
--- /dev/null
+++ b/include/linux/usb_usual.h
@@ -0,0 +1,102 @@
+/*
+ * Interface to the libusual.
+ *
+ * Copyright (c) 2005 Pete Zaitcev <zaitcev@redhat.com>
+ * Copyright (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ * Copyright (c) 1999 Michael Gee (michael@linuxspecific.com)
+ */
+
+#ifndef __LINUX_USB_USUAL_H
+#define __LINUX_USB_USUAL_H
+
+
+/* We should do this for cleanliness... But other usb_foo.h do not do this. */
+/* #include <linux/usb.h> */
+
+/*
+ * The flags field, which we store in usb_device_id.driver_info.
+ * It is compatible with the old usb-storage flags in lower 24 bits.
+ */
+
+/*
+ * Static flag definitions.  We use this roundabout technique so that the
+ * proc_info() routine can automatically display a message for each flag.
+ */
+#define US_DO_ALL_FLAGS						\
+	US_FLAG(SINGLE_LUN,	0x00000001)			\
+		/* allow access to only LUN 0 */		\
+	US_FLAG(NEED_OVERRIDE,	0x00000002)			\
+		/* unusual_devs entry is necessary */		\
+	US_FLAG(SCM_MULT_TARG,	0x00000004)			\
+		/* supports multiple targets */			\
+	US_FLAG(FIX_INQUIRY,	0x00000008)			\
+		/* INQUIRY response needs faking */		\
+	US_FLAG(FIX_CAPACITY,	0x00000010)			\
+		/* READ CAPACITY response too big */		\
+	US_FLAG(IGNORE_RESIDUE,	0x00000020)			\
+		/* reported residue is wrong */			\
+	US_FLAG(BULK32,		0x00000040)			\
+		/* Uses 32-byte CBW length */			\
+	US_FLAG(NOT_LOCKABLE,	0x00000080)			\
+		/* PREVENT/ALLOW not supported */		\
+	US_FLAG(GO_SLOW,	0x00000100)			\
+		/* Need delay after Command phase */		\
+	US_FLAG(NO_WP_DETECT,	0x00000200)			\
+		/* Don't check for write-protect */		\
+	US_FLAG(MAX_SECTORS_64,	0x00000400)			\
+		/* Sets max_sectors to 64    */			\
+	US_FLAG(IGNORE_DEVICE,	0x00000800)			\
+		/* Don't claim device */			\
+	US_FLAG(CAPACITY_HEURISTICS,	0x00001000)		\
+		/* sometimes sizes is too big */		\
+	US_FLAG(MAX_SECTORS_MIN,0x00002000)			\
+		/* Sets max_sectors to arch min */		\
+	US_FLAG(BULK_IGNORE_TAG,0x00004000)			\
+		/* Ignore tag mismatch in bulk operations */    \
+	US_FLAG(SANE_SENSE,     0x00008000)			\
+		/* Sane Sense (> 18 bytes) */			\
+	US_FLAG(CAPACITY_OK,	0x00010000)			\
+		/* READ CAPACITY response is correct */		\
+	US_FLAG(BAD_SENSE,	0x00020000)			\
+		/* Bad Sense (never more than 18 bytes) */	\
+	US_FLAG(NO_READ_DISC_INFO,	0x00040000)		\
+		/* cannot handle READ_DISC_INFO */		\
+	US_FLAG(NO_READ_CAPACITY_16,	0x00080000)		\
+		/* cannot handle READ_CAPACITY_16 */		\
+	US_FLAG(INITIAL_READ10,	0x00100000)			\
+		/* Initial READ(10) (and others) must be retried */
+
+#define US_FLAG(name, value)	US_FL_##name = value ,
+enum { US_DO_ALL_FLAGS };
+#undef US_FLAG
+
+/*
+ * The bias field for libusual and friends.
+ */
+#define USB_US_TYPE_NONE   0
+#define USB_US_TYPE_STOR   1		/* usb-storage */
+#define USB_US_TYPE_UB     2		/* ub */
+
+#define USB_US_TYPE(flags) 		(((flags) >> 24) & 0xFF)
+#define USB_US_ORIG_FLAGS(flags)	((flags) & 0x00FFFFFF)
+
+#include <linux/usb/storage.h>
+
+/*
+ */
+extern int usb_usual_ignore_device(struct usb_interface *intf);
+extern struct usb_device_id usb_storage_usb_ids[];
+
+#ifdef CONFIG_USB_LIBUSUAL
+
+extern void usb_usual_set_present(int type);
+extern void usb_usual_clear_present(int type);
+extern int usb_usual_check_type(const struct usb_device_id *, int type);
+#else
+
+#define usb_usual_set_present(t)	do { } while(0)
+#define usb_usual_clear_present(t)	do { } while(0)
+#define usb_usual_check_type(id, t)	(0)
+#endif /* CONFIG_USB_LIBUSUAL */
+
+#endif /* __LINUX_USB_USUAL_H */
diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h
new file mode 100644
index 00000000..15591d2e
--- /dev/null
+++ b/include/linux/usbdevice_fs.h
@@ -0,0 +1,207 @@
+/*****************************************************************************/
+
+/*
+ *	usbdevice_fs.h  --  USB device file system.
+ *
+ *	Copyright (C) 2000
+ *          Thomas Sailer (sailer@ife.ee.ethz.ch)
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License
+ *	along with this program; if not, write to the Free Software
+ *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  History:
+ *   0.1  04.01.2000  Created
+ */
+
+/*****************************************************************************/
+
+#ifndef _LINUX_USBDEVICE_FS_H
+#define _LINUX_USBDEVICE_FS_H
+
+#include <linux/types.h>
+#include <linux/magic.h>
+
+/* --------------------------------------------------------------------- */
+
+/* usbdevfs ioctl codes */
+
+struct usbdevfs_ctrltransfer {
+	__u8 bRequestType;
+	__u8 bRequest;
+	__u16 wValue;
+	__u16 wIndex;
+	__u16 wLength;
+	__u32 timeout;  /* in milliseconds */
+ 	void __user *data;
+};
+
+struct usbdevfs_bulktransfer {
+	unsigned int ep;
+	unsigned int len;
+	unsigned int timeout; /* in milliseconds */
+	void __user *data;
+};
+
+struct usbdevfs_setinterface {
+	unsigned int interface;
+	unsigned int altsetting;
+};
+
+struct usbdevfs_disconnectsignal {
+	unsigned int signr;
+	void __user *context;
+};
+
+#define USBDEVFS_MAXDRIVERNAME 255
+
+struct usbdevfs_getdriver {
+	unsigned int interface;
+	char driver[USBDEVFS_MAXDRIVERNAME + 1];
+};
+
+struct usbdevfs_connectinfo {
+	unsigned int devnum;
+	unsigned char slow;
+};
+
+#define USBDEVFS_URB_SHORT_NOT_OK	0x01
+#define USBDEVFS_URB_ISO_ASAP		0x02
+#define USBDEVFS_URB_BULK_CONTINUATION	0x04
+#define USBDEVFS_URB_NO_FSBR		0x20
+#define USBDEVFS_URB_ZERO_PACKET	0x40
+#define USBDEVFS_URB_NO_INTERRUPT	0x80
+
+#define USBDEVFS_URB_TYPE_ISO		   0
+#define USBDEVFS_URB_TYPE_INTERRUPT	   1
+#define USBDEVFS_URB_TYPE_CONTROL	   2
+#define USBDEVFS_URB_TYPE_BULK		   3
+
+struct usbdevfs_iso_packet_desc {
+	unsigned int length;
+	unsigned int actual_length;
+	unsigned int status;
+};
+
+struct usbdevfs_urb {
+	unsigned char type;
+	unsigned char endpoint;
+	int status;
+	unsigned int flags;
+	void __user *buffer;
+	int buffer_length;
+	int actual_length;
+	int start_frame;
+	int number_of_packets;
+	int error_count;
+	unsigned int signr;	/* signal to be sent on completion,
+				  or 0 if none should be sent. */
+	void __user *usercontext;
+	struct usbdevfs_iso_packet_desc iso_frame_desc[0];
+};
+
+/* ioctls for talking directly to drivers */
+struct usbdevfs_ioctl {
+	int	ifno;		/* interface 0..N ; negative numbers reserved */
+	int	ioctl_code;	/* MUST encode size + direction of data so the
+				 * macros in <asm/ioctl.h> give correct values */
+	void __user *data;	/* param buffer (in, or out) */
+};
+
+/* You can do most things with hubs just through control messages,
+ * except find out what device connects to what port. */
+struct usbdevfs_hub_portinfo {
+	char nports;		/* number of downstream ports in this hub */
+	char port [127];	/* e.g. port 3 connects to device 27 */
+};
+
+#ifdef __KERNEL__
+#ifdef CONFIG_COMPAT
+#include <linux/compat.h>
+
+struct usbdevfs_ctrltransfer32 {
+        u8 bRequestType;
+        u8 bRequest;
+        u16 wValue;
+        u16 wIndex;
+        u16 wLength;
+        u32 timeout;  /* in milliseconds */
+        compat_caddr_t data;
+};
+
+struct usbdevfs_bulktransfer32 {
+        compat_uint_t ep;
+        compat_uint_t len;
+        compat_uint_t timeout; /* in milliseconds */
+        compat_caddr_t data;
+};
+
+struct usbdevfs_disconnectsignal32 {
+        compat_int_t signr;
+        compat_caddr_t context;
+};
+
+struct usbdevfs_urb32 {
+	unsigned char type;
+	unsigned char endpoint;
+	compat_int_t status;
+	compat_uint_t flags;
+	compat_caddr_t buffer;
+	compat_int_t buffer_length;
+	compat_int_t actual_length;
+	compat_int_t start_frame;
+	compat_int_t number_of_packets;
+	compat_int_t error_count;
+	compat_uint_t signr;
+	compat_caddr_t usercontext; /* unused */
+	struct usbdevfs_iso_packet_desc iso_frame_desc[0];
+};
+
+struct usbdevfs_ioctl32 {
+	s32 ifno;
+	s32 ioctl_code;
+	compat_caddr_t data;
+};
+#endif
+#endif /* __KERNEL__ */
+
+#define USBDEVFS_CONTROL           _IOWR('U', 0, struct usbdevfs_ctrltransfer)
+#define USBDEVFS_CONTROL32           _IOWR('U', 0, struct usbdevfs_ctrltransfer32)
+#define USBDEVFS_BULK              _IOWR('U', 2, struct usbdevfs_bulktransfer)
+#define USBDEVFS_BULK32              _IOWR('U', 2, struct usbdevfs_bulktransfer32)
+#define USBDEVFS_RESETEP           _IOR('U', 3, unsigned int)
+#define USBDEVFS_SETINTERFACE      _IOR('U', 4, struct usbdevfs_setinterface)
+#define USBDEVFS_SETCONFIGURATION  _IOR('U', 5, unsigned int)
+#define USBDEVFS_GETDRIVER         _IOW('U', 8, struct usbdevfs_getdriver)
+#define USBDEVFS_SUBMITURB         _IOR('U', 10, struct usbdevfs_urb)
+#define USBDEVFS_SUBMITURB32       _IOR('U', 10, struct usbdevfs_urb32)
+#define USBDEVFS_DISCARDURB        _IO('U', 11)
+#define USBDEVFS_REAPURB           _IOW('U', 12, void *)
+#define USBDEVFS_REAPURB32         _IOW('U', 12, __u32)
+#define USBDEVFS_REAPURBNDELAY     _IOW('U', 13, void *)
+#define USBDEVFS_REAPURBNDELAY32   _IOW('U', 13, __u32)
+#define USBDEVFS_DISCSIGNAL        _IOR('U', 14, struct usbdevfs_disconnectsignal)
+#define USBDEVFS_DISCSIGNAL32      _IOR('U', 14, struct usbdevfs_disconnectsignal32)
+#define USBDEVFS_CLAIMINTERFACE    _IOR('U', 15, unsigned int)
+#define USBDEVFS_RELEASEINTERFACE  _IOR('U', 16, unsigned int)
+#define USBDEVFS_CONNECTINFO       _IOW('U', 17, struct usbdevfs_connectinfo)
+#define USBDEVFS_IOCTL             _IOWR('U', 18, struct usbdevfs_ioctl)
+#define USBDEVFS_IOCTL32           _IOWR('U', 18, struct usbdevfs_ioctl32)
+#define USBDEVFS_HUB_PORTINFO      _IOR('U', 19, struct usbdevfs_hub_portinfo)
+#define USBDEVFS_RESET             _IO('U', 20)
+#define USBDEVFS_CLEAR_HALT        _IOR('U', 21, unsigned int)
+#define USBDEVFS_DISCONNECT        _IO('U', 22)
+#define USBDEVFS_CONNECT           _IO('U', 23)
+#define USBDEVFS_CLAIM_PORT        _IOR('U', 24, unsigned int)
+#define USBDEVFS_RELEASE_PORT      _IOR('U', 25, unsigned int)
+#endif /* _LINUX_USBDEVICE_FS_H */
diff --git a/include/linux/user-return-notifier.h b/include/linux/user-return-notifier.h
new file mode 100644
index 00000000..9c4a445b
--- /dev/null
+++ b/include/linux/user-return-notifier.h
@@ -0,0 +1,49 @@
+#ifndef _LINUX_USER_RETURN_NOTIFIER_H
+#define _LINUX_USER_RETURN_NOTIFIER_H
+
+#ifdef CONFIG_USER_RETURN_NOTIFIER
+
+#include <linux/list.h>
+#include <linux/sched.h>
+
+struct user_return_notifier {
+	void (*on_user_return)(struct user_return_notifier *urn);
+	struct hlist_node link;
+};
+
+
+void user_return_notifier_register(struct user_return_notifier *urn);
+void user_return_notifier_unregister(struct user_return_notifier *urn);
+
+static inline void propagate_user_return_notify(struct task_struct *prev,
+						struct task_struct *next)
+{
+	if (test_tsk_thread_flag(prev, TIF_USER_RETURN_NOTIFY)) {
+		clear_tsk_thread_flag(prev, TIF_USER_RETURN_NOTIFY);
+		set_tsk_thread_flag(next, TIF_USER_RETURN_NOTIFY);
+	}
+}
+
+void fire_user_return_notifiers(void);
+
+static inline void clear_user_return_notifier(struct task_struct *p)
+{
+	clear_tsk_thread_flag(p, TIF_USER_RETURN_NOTIFY);
+}
+
+#else
+
+struct user_return_notifier {};
+
+static inline void propagate_user_return_notify(struct task_struct *prev,
+						struct task_struct *next)
+{
+}
+
+static inline void fire_user_return_notifiers(void) {}
+
+static inline void clear_user_return_notifier(struct task_struct *p) {}
+
+#endif
+
+#endif
diff --git a/include/linux/user.h b/include/linux/user.h
new file mode 100644
index 00000000..68daf840
--- /dev/null
+++ b/include/linux/user.h
@@ -0,0 +1 @@
+#include <asm/user.h>
diff --git a/include/linux/user_namespace.h b/include/linux/user_namespace.h
new file mode 100644
index 00000000..faf46794
--- /dev/null
+++ b/include/linux/user_namespace.h
@@ -0,0 +1,71 @@
+#ifndef _LINUX_USER_NAMESPACE_H
+#define _LINUX_USER_NAMESPACE_H
+
+#include <linux/kref.h>
+#include <linux/nsproxy.h>
+#include <linux/sched.h>
+#include <linux/err.h>
+
+#define UIDHASH_BITS	(CONFIG_BASE_SMALL ? 3 : 7)
+#define UIDHASH_SZ	(1 << UIDHASH_BITS)
+
+struct user_namespace {
+	struct kref		kref;
+	struct hlist_head	uidhash_table[UIDHASH_SZ];
+	struct user_struct	*creator;
+	struct work_struct	destroyer;
+};
+
+extern struct user_namespace init_user_ns;
+
+#ifdef CONFIG_USER_NS
+
+static inline struct user_namespace *get_user_ns(struct user_namespace *ns)
+{
+	if (ns)
+		kref_get(&ns->kref);
+	return ns;
+}
+
+extern int create_user_ns(struct cred *new);
+extern void free_user_ns(struct kref *kref);
+
+static inline void put_user_ns(struct user_namespace *ns)
+{
+	if (ns)
+		kref_put(&ns->kref, free_user_ns);
+}
+
+uid_t user_ns_map_uid(struct user_namespace *to, const struct cred *cred, uid_t uid);
+gid_t user_ns_map_gid(struct user_namespace *to, const struct cred *cred, gid_t gid);
+
+#else
+
+static inline struct user_namespace *get_user_ns(struct user_namespace *ns)
+{
+	return &init_user_ns;
+}
+
+static inline int create_user_ns(struct cred *new)
+{
+	return -EINVAL;
+}
+
+static inline void put_user_ns(struct user_namespace *ns)
+{
+}
+
+static inline uid_t user_ns_map_uid(struct user_namespace *to,
+	const struct cred *cred, uid_t uid)
+{
+	return uid;
+}
+static inline gid_t user_ns_map_gid(struct user_namespace *to,
+	const struct cred *cred, gid_t gid)
+{
+	return gid;
+}
+
+#endif
+
+#endif /* _LINUX_USER_H */
diff --git a/include/linux/utime.h b/include/linux/utime.h
new file mode 100644
index 00000000..5cdf673a
--- /dev/null
+++ b/include/linux/utime.h
@@ -0,0 +1,11 @@
+#ifndef _LINUX_UTIME_H
+#define _LINUX_UTIME_H
+
+#include <linux/types.h>
+
+struct utimbuf {
+	__kernel_time_t actime;
+	__kernel_time_t modtime;
+};
+
+#endif
diff --git a/include/linux/uts.h b/include/linux/uts.h
new file mode 100644
index 00000000..6ddbd863
--- /dev/null
+++ b/include/linux/uts.h
@@ -0,0 +1,19 @@
+#ifndef _LINUX_UTS_H
+#define _LINUX_UTS_H
+
+/*
+ * Defines for what uname() should return 
+ */
+#ifndef UTS_SYSNAME
+#define UTS_SYSNAME "Linux"
+#endif
+
+#ifndef UTS_NODENAME
+#define UTS_NODENAME CONFIG_DEFAULT_HOSTNAME /* set by sethostname() */
+#endif
+
+#ifndef UTS_DOMAINNAME
+#define UTS_DOMAINNAME "(none)"	/* set by setdomainname() */
+#endif
+
+#endif
diff --git a/include/linux/utsname.h b/include/linux/utsname.h
new file mode 100644
index 00000000..c714ed75
--- /dev/null
+++ b/include/linux/utsname.h
@@ -0,0 +1,113 @@
+#ifndef _LINUX_UTSNAME_H
+#define _LINUX_UTSNAME_H
+
+#define __OLD_UTS_LEN 8
+
+struct oldold_utsname {
+	char sysname[9];
+	char nodename[9];
+	char release[9];
+	char version[9];
+	char machine[9];
+};
+
+#define __NEW_UTS_LEN 64
+
+struct old_utsname {
+	char sysname[65];
+	char nodename[65];
+	char release[65];
+	char version[65];
+	char machine[65];
+};
+
+struct new_utsname {
+	char sysname[__NEW_UTS_LEN + 1];
+	char nodename[__NEW_UTS_LEN + 1];
+	char release[__NEW_UTS_LEN + 1];
+	char version[__NEW_UTS_LEN + 1];
+	char machine[__NEW_UTS_LEN + 1];
+	char domainname[__NEW_UTS_LEN + 1];
+};
+
+#ifdef __KERNEL__
+
+#include <linux/sched.h>
+#include <linux/kref.h>
+#include <linux/nsproxy.h>
+#include <linux/err.h>
+
+enum uts_proc {
+	UTS_PROC_OSTYPE,
+	UTS_PROC_OSRELEASE,
+	UTS_PROC_VERSION,
+	UTS_PROC_HOSTNAME,
+	UTS_PROC_DOMAINNAME,
+};
+
+struct user_namespace;
+extern struct user_namespace init_user_ns;
+
+struct uts_namespace {
+	struct kref kref;
+	struct new_utsname name;
+	struct user_namespace *user_ns;
+};
+extern struct uts_namespace init_uts_ns;
+
+#ifdef CONFIG_UTS_NS
+static inline void get_uts_ns(struct uts_namespace *ns)
+{
+	kref_get(&ns->kref);
+}
+
+extern struct uts_namespace *copy_utsname(unsigned long flags,
+					  struct task_struct *tsk);
+extern void free_uts_ns(struct kref *kref);
+
+static inline void put_uts_ns(struct uts_namespace *ns)
+{
+	kref_put(&ns->kref, free_uts_ns);
+}
+#else
+static inline void get_uts_ns(struct uts_namespace *ns)
+{
+}
+
+static inline void put_uts_ns(struct uts_namespace *ns)
+{
+}
+
+static inline struct uts_namespace *copy_utsname(unsigned long flags,
+						 struct task_struct *tsk)
+{
+	if (flags & CLONE_NEWUTS)
+		return ERR_PTR(-EINVAL);
+
+	return tsk->nsproxy->uts_ns;
+}
+#endif
+
+#ifdef CONFIG_PROC_SYSCTL
+extern void uts_proc_notify(enum uts_proc proc);
+#else
+static inline void uts_proc_notify(enum uts_proc proc)
+{
+}
+#endif
+
+static inline struct new_utsname *utsname(void)
+{
+	return &current->nsproxy->uts_ns->name;
+}
+
+static inline struct new_utsname *init_utsname(void)
+{
+	return &init_uts_ns.name;
+}
+
+extern struct rw_semaphore uts_sem;
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_UTSNAME_H */
diff --git a/include/linux/uuid.h b/include/linux/uuid.h
new file mode 100644
index 00000000..5b7efbfc
--- /dev/null
+++ b/include/linux/uuid.h
@@ -0,0 +1,70 @@
+/*
+ * UUID/GUID definition
+ *
+ * Copyright (C) 2010, Intel Corp.
+ *	Huang Ying <ying.huang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation;
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _LINUX_UUID_H_
+#define _LINUX_UUID_H_
+
+#include <linux/types.h>
+#include <linux/string.h>
+
+typedef struct {
+	__u8 b[16];
+} uuid_le;
+
+typedef struct {
+	__u8 b[16];
+} uuid_be;
+
+#define UUID_LE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7)		\
+((uuid_le)								\
+{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \
+   (b) & 0xff, ((b) >> 8) & 0xff,					\
+   (c) & 0xff, ((c) >> 8) & 0xff,					\
+   (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }})
+
+#define UUID_BE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7)		\
+((uuid_be)								\
+{{ ((a) >> 24) & 0xff, ((a) >> 16) & 0xff, ((a) >> 8) & 0xff, (a) & 0xff, \
+   ((b) >> 8) & 0xff, (b) & 0xff,					\
+   ((c) >> 8) & 0xff, (c) & 0xff,					\
+   (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }})
+
+#define NULL_UUID_LE							\
+	UUID_LE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00,	\
+		0x00, 0x00, 0x00, 0x00)
+
+#define NULL_UUID_BE							\
+	UUID_BE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00,	\
+		0x00, 0x00, 0x00, 0x00)
+
+static inline int uuid_le_cmp(const uuid_le u1, const uuid_le u2)
+{
+	return memcmp(&u1, &u2, sizeof(uuid_le));
+}
+
+static inline int uuid_be_cmp(const uuid_be u1, const uuid_be u2)
+{
+	return memcmp(&u1, &u2, sizeof(uuid_be));
+}
+
+extern void uuid_le_gen(uuid_le *u);
+extern void uuid_be_gen(uuid_be *u);
+
+#endif
diff --git a/include/linux/uvcvideo.h b/include/linux/uvcvideo.h
new file mode 100644
index 00000000..f46a53f0
--- /dev/null
+++ b/include/linux/uvcvideo.h
@@ -0,0 +1,69 @@
+#ifndef __LINUX_UVCVIDEO_H_
+#define __LINUX_UVCVIDEO_H_
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/*
+ * Dynamic controls
+ */
+
+/* Data types for UVC control data */
+#define UVC_CTRL_DATA_TYPE_RAW		0
+#define UVC_CTRL_DATA_TYPE_SIGNED	1
+#define UVC_CTRL_DATA_TYPE_UNSIGNED	2
+#define UVC_CTRL_DATA_TYPE_BOOLEAN	3
+#define UVC_CTRL_DATA_TYPE_ENUM		4
+#define UVC_CTRL_DATA_TYPE_BITMASK	5
+
+/* Control flags */
+#define UVC_CTRL_FLAG_SET_CUR		(1 << 0)
+#define UVC_CTRL_FLAG_GET_CUR		(1 << 1)
+#define UVC_CTRL_FLAG_GET_MIN		(1 << 2)
+#define UVC_CTRL_FLAG_GET_MAX		(1 << 3)
+#define UVC_CTRL_FLAG_GET_RES		(1 << 4)
+#define UVC_CTRL_FLAG_GET_DEF		(1 << 5)
+/* Control should be saved at suspend and restored at resume. */
+#define UVC_CTRL_FLAG_RESTORE		(1 << 6)
+/* Control can be updated by the camera. */
+#define UVC_CTRL_FLAG_AUTO_UPDATE	(1 << 7)
+
+#define UVC_CTRL_FLAG_GET_RANGE \
+	(UVC_CTRL_FLAG_GET_CUR | UVC_CTRL_FLAG_GET_MIN | \
+	 UVC_CTRL_FLAG_GET_MAX | UVC_CTRL_FLAG_GET_RES | \
+	 UVC_CTRL_FLAG_GET_DEF)
+
+struct uvc_menu_info {
+	__u32 value;
+	__u8 name[32];
+};
+
+struct uvc_xu_control_mapping {
+	__u32 id;
+	__u8 name[32];
+	__u8 entity[16];
+	__u8 selector;
+
+	__u8 size;
+	__u8 offset;
+	__u32 v4l2_type;
+	__u32 data_type;
+
+	struct uvc_menu_info __user *menu_info;
+	__u32 menu_count;
+
+	__u32 reserved[4];
+};
+
+struct uvc_xu_control_query {
+	__u8 unit;
+	__u8 selector;
+	__u8 query;
+	__u16 size;
+	__u8 __user *data;
+};
+
+#define UVCIOC_CTRL_MAP		_IOWR('u', 0x20, struct uvc_xu_control_mapping)
+#define UVCIOC_CTRL_QUERY	_IOWR('u', 0x21, struct uvc_xu_control_query)
+
+#endif
diff --git a/include/linux/uwb.h b/include/linux/uwb.h
new file mode 100644
index 00000000..7dbbee97
--- /dev/null
+++ b/include/linux/uwb.h
@@ -0,0 +1,831 @@
+/*
+ * Ultra Wide Band
+ * UWB API
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: doc: overview of the API, different parts and pointers
+ */
+
+#ifndef __LINUX__UWB_H__
+#define __LINUX__UWB_H__
+
+#include <linux/limits.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/timer.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+#include <linux/uwb/spec.h>
+#include <asm/page.h>
+
+struct uwb_dev;
+struct uwb_beca_e;
+struct uwb_rc;
+struct uwb_rsv;
+struct uwb_dbg;
+
+/**
+ * struct uwb_dev - a UWB Device
+ * @rc: UWB Radio Controller that discovered the device (kind of its
+ *     parent).
+ * @bce: a beacon cache entry for this device; or NULL if the device
+ *     is a local radio controller.
+ * @mac_addr: the EUI-48 address of this device.
+ * @dev_addr: the current DevAddr used by this device.
+ * @beacon_slot: the slot number the beacon is using.
+ * @streams: bitmap of streams allocated to reservations targeted at
+ *     this device.  For an RC, this is the streams allocated for
+ *     reservations targeted at DevAddrs.
+ *
+ * A UWB device may either by a neighbor or part of a local radio
+ * controller.
+ */
+struct uwb_dev {
+	struct mutex mutex;
+	struct list_head list_node;
+	struct device dev;
+	struct uwb_rc *rc;		/* radio controller */
+	struct uwb_beca_e *bce;		/* Beacon Cache Entry */
+
+	struct uwb_mac_addr mac_addr;
+	struct uwb_dev_addr dev_addr;
+	int beacon_slot;
+	DECLARE_BITMAP(streams, UWB_NUM_STREAMS);
+	DECLARE_BITMAP(last_availability_bm, UWB_NUM_MAS);
+};
+#define to_uwb_dev(d) container_of(d, struct uwb_dev, dev)
+
+/**
+ * UWB HWA/WHCI Radio Control {Command|Event} Block context IDs
+ *
+ * RC[CE]Bs have a 'context ID' field that matches the command with
+ * the event received to confirm it.
+ *
+ * Maximum number of context IDs
+ */
+enum { UWB_RC_CTX_MAX = 256 };
+
+
+/** Notification chain head for UWB generated events to listeners */
+struct uwb_notifs_chain {
+	struct list_head list;
+	struct mutex mutex;
+};
+
+/* Beacon cache list */
+struct uwb_beca {
+	struct list_head list;
+	size_t entries;
+	struct mutex mutex;
+};
+
+/* Event handling thread. */
+struct uwbd {
+	int pid;
+	struct task_struct *task;
+	wait_queue_head_t wq;
+	struct list_head event_list;
+	spinlock_t event_list_lock;
+};
+
+/**
+ * struct uwb_mas_bm - a bitmap of all MAS in a superframe
+ * @bm: a bitmap of length #UWB_NUM_MAS
+ */
+struct uwb_mas_bm {
+	DECLARE_BITMAP(bm, UWB_NUM_MAS);
+	DECLARE_BITMAP(unsafe_bm, UWB_NUM_MAS);
+	int safe;
+	int unsafe;
+};
+
+/**
+ * uwb_rsv_state - UWB Reservation state.
+ *
+ * NONE - reservation is not active (no DRP IE being transmitted).
+ *
+ * Owner reservation states:
+ *
+ * INITIATED - owner has sent an initial DRP request.
+ * PENDING - target responded with pending Reason Code.
+ * MODIFIED - reservation manager is modifying an established
+ * reservation with a different MAS allocation.
+ * ESTABLISHED - the reservation has been successfully negotiated.
+ *
+ * Target reservation states:
+ *
+ * DENIED - request is denied.
+ * ACCEPTED - request is accepted.
+ * PENDING - PAL has yet to make a decision to whether to accept or
+ * deny.
+ *
+ * FIXME: further target states TBD.
+ */
+enum uwb_rsv_state {
+	UWB_RSV_STATE_NONE = 0,
+	UWB_RSV_STATE_O_INITIATED,
+	UWB_RSV_STATE_O_PENDING,
+	UWB_RSV_STATE_O_MODIFIED,
+	UWB_RSV_STATE_O_ESTABLISHED,
+	UWB_RSV_STATE_O_TO_BE_MOVED,
+	UWB_RSV_STATE_O_MOVE_EXPANDING,
+	UWB_RSV_STATE_O_MOVE_COMBINING,
+	UWB_RSV_STATE_O_MOVE_REDUCING,
+	UWB_RSV_STATE_T_ACCEPTED,
+	UWB_RSV_STATE_T_DENIED,
+	UWB_RSV_STATE_T_CONFLICT,
+	UWB_RSV_STATE_T_PENDING,
+	UWB_RSV_STATE_T_EXPANDING_ACCEPTED,
+	UWB_RSV_STATE_T_EXPANDING_CONFLICT,
+	UWB_RSV_STATE_T_EXPANDING_PENDING,
+	UWB_RSV_STATE_T_EXPANDING_DENIED,
+	UWB_RSV_STATE_T_RESIZED,
+
+	UWB_RSV_STATE_LAST,
+};
+
+enum uwb_rsv_target_type {
+	UWB_RSV_TARGET_DEV,
+	UWB_RSV_TARGET_DEVADDR,
+};
+
+/**
+ * struct uwb_rsv_target - the target of a reservation.
+ *
+ * Reservations unicast and targeted at a single device
+ * (UWB_RSV_TARGET_DEV); or (e.g., in the case of WUSB) targeted at a
+ * specific (private) DevAddr (UWB_RSV_TARGET_DEVADDR).
+ */
+struct uwb_rsv_target {
+	enum uwb_rsv_target_type type;
+	union {
+		struct uwb_dev *dev;
+		struct uwb_dev_addr devaddr;
+	};
+};
+
+struct uwb_rsv_move {
+	struct uwb_mas_bm final_mas;
+	struct uwb_ie_drp *companion_drp_ie;
+	struct uwb_mas_bm companion_mas;
+};
+
+/*
+ * Number of streams reserved for reservations targeted at DevAddrs.
+ */
+#define UWB_NUM_GLOBAL_STREAMS 1
+
+typedef void (*uwb_rsv_cb_f)(struct uwb_rsv *rsv);
+
+/**
+ * struct uwb_rsv - a DRP reservation
+ *
+ * Data structure management:
+ *
+ * @rc:             the radio controller this reservation is for
+ *                  (as target or owner)
+ * @rc_node:        a list node for the RC
+ * @pal_node:       a list node for the PAL
+ *
+ * Owner and target parameters:
+ *
+ * @owner:          the UWB device owning this reservation
+ * @target:         the target UWB device
+ * @type:           reservation type
+ *
+ * Owner parameters:
+ *
+ * @max_mas:        maxiumum number of MAS
+ * @min_mas:        minimum number of MAS
+ * @sparsity:       owner selected sparsity
+ * @is_multicast:   true iff multicast
+ *
+ * @callback:       callback function when the reservation completes
+ * @pal_priv:       private data for the PAL making the reservation
+ *
+ * Reservation status:
+ *
+ * @status:         negotiation status
+ * @stream:         stream index allocated for this reservation
+ * @tiebreaker:     conflict tiebreaker for this reservation
+ * @mas:            reserved MAS
+ * @drp_ie:         the DRP IE
+ * @ie_valid:       true iff the DRP IE matches the reservation parameters
+ *
+ * DRP reservations are uniquely identified by the owner, target and
+ * stream index.  However, when using a DevAddr as a target (e.g., for
+ * a WUSB cluster reservation) the responses may be received from
+ * devices with different DevAddrs.  In this case, reservations are
+ * uniquely identified by just the stream index.  A number of stream
+ * indexes (UWB_NUM_GLOBAL_STREAMS) are reserved for this.
+ */
+struct uwb_rsv {
+	struct uwb_rc *rc;
+	struct list_head rc_node;
+	struct list_head pal_node;
+	struct kref kref;
+
+	struct uwb_dev *owner;
+	struct uwb_rsv_target target;
+	enum uwb_drp_type type;
+	int max_mas;
+	int min_mas;
+	int max_interval;
+	bool is_multicast;
+
+	uwb_rsv_cb_f callback;
+	void *pal_priv;
+
+	enum uwb_rsv_state state;
+	bool needs_release_companion_mas;
+	u8 stream;
+	u8 tiebreaker;
+	struct uwb_mas_bm mas;
+	struct uwb_ie_drp *drp_ie;
+	struct uwb_rsv_move mv;
+	bool ie_valid;
+	struct timer_list timer;
+	struct work_struct handle_timeout_work;
+};
+
+static const
+struct uwb_mas_bm uwb_mas_bm_zero = { .bm = { 0 } };
+
+static inline void uwb_mas_bm_copy_le(void *dst, const struct uwb_mas_bm *mas)
+{
+	bitmap_copy_le(dst, mas->bm, UWB_NUM_MAS);
+}
+
+/**
+ * struct uwb_drp_avail - a radio controller's view of MAS usage
+ * @global:   MAS unused by neighbors (excluding reservations targeted
+ *            or owned by the local radio controller) or the beaon period
+ * @local:    MAS unused by local established reservations
+ * @pending:  MAS unused by local pending reservations
+ * @ie:       DRP Availability IE to be included in the beacon
+ * @ie_valid: true iff @ie is valid and does not need to regenerated from
+ *            @global and @local
+ *
+ * Each radio controller maintains a view of MAS usage or
+ * availability. MAS available for a new reservation are determined
+ * from the intersection of @global, @local, and @pending.
+ *
+ * The radio controller must transmit a DRP Availability IE that's the
+ * intersection of @global and @local.
+ *
+ * A set bit indicates the MAS is unused and available.
+ *
+ * rc->rsvs_mutex should be held before accessing this data structure.
+ *
+ * [ECMA-368] section 17.4.3.
+ */
+struct uwb_drp_avail {
+	DECLARE_BITMAP(global, UWB_NUM_MAS);
+	DECLARE_BITMAP(local, UWB_NUM_MAS);
+	DECLARE_BITMAP(pending, UWB_NUM_MAS);
+	struct uwb_ie_drp_avail ie;
+	bool ie_valid;
+};
+
+struct uwb_drp_backoff_win {
+	u8 window;
+	u8 n;
+	int total_expired;
+	struct timer_list timer;
+	bool can_reserve_extra_mases;
+};
+
+const char *uwb_rsv_state_str(enum uwb_rsv_state state);
+const char *uwb_rsv_type_str(enum uwb_drp_type type);
+
+struct uwb_rsv *uwb_rsv_create(struct uwb_rc *rc, uwb_rsv_cb_f cb,
+			       void *pal_priv);
+void uwb_rsv_destroy(struct uwb_rsv *rsv);
+
+int uwb_rsv_establish(struct uwb_rsv *rsv);
+int uwb_rsv_modify(struct uwb_rsv *rsv,
+		   int max_mas, int min_mas, int sparsity);
+void uwb_rsv_terminate(struct uwb_rsv *rsv);
+
+void uwb_rsv_accept(struct uwb_rsv *rsv, uwb_rsv_cb_f cb, void *pal_priv);
+
+void uwb_rsv_get_usable_mas(struct uwb_rsv *orig_rsv, struct uwb_mas_bm *mas);
+
+/**
+ * Radio Control Interface instance
+ *
+ *
+ * Life cycle rules: those of the UWB Device.
+ *
+ * @index:    an index number for this radio controller, as used in the
+ *            device name.
+ * @version:  version of protocol supported by this device
+ * @priv:     Backend implementation; rw with uwb_dev.dev.sem taken.
+ * @cmd:      Backend implementation to execute commands; rw and call
+ *            only  with uwb_dev.dev.sem taken.
+ * @reset:    Hardware reset of radio controller and any PAL controllers.
+ * @filter:   Backend implementation to manipulate data to and from device
+ *            to be compliant to specification assumed by driver (WHCI
+ *            0.95).
+ *
+ *            uwb_dev.dev.mutex is used to execute commands and update
+ *            the corresponding structures; can't use a spinlock
+ *            because rc->cmd() can sleep.
+ * @ies:         This is a dynamically allocated array cacheing the
+ *               IEs (settable by the host) that the beacon of this
+ *               radio controller is currently sending.
+ *
+ *               In reality, we store here the full command we set to
+ *               the radio controller (which is basically a command
+ *               prefix followed by all the IEs the beacon currently
+ *               contains). This way we don't have to realloc and
+ *               memcpy when setting it.
+ *
+ *               We set this up in uwb_rc_ie_setup(), where we alloc
+ *               this struct, call get_ie() [so we know which IEs are
+ *               currently being sent, if any].
+ *
+ * @ies_capacity:Amount of space (in bytes) allocated in @ies. The
+ *               amount used is given by sizeof(*ies) plus ies->wIELength
+ *               (which is a little endian quantity all the time).
+ * @ies_mutex:   protect the IE cache
+ * @dbg:         information for the debug interface
+ */
+struct uwb_rc {
+	struct uwb_dev uwb_dev;
+	int index;
+	u16 version;
+
+	struct module *owner;
+	void *priv;
+	int (*start)(struct uwb_rc *rc);
+	void (*stop)(struct uwb_rc *rc);
+	int (*cmd)(struct uwb_rc *, const struct uwb_rccb *, size_t);
+	int (*reset)(struct uwb_rc *rc);
+	int (*filter_cmd)(struct uwb_rc *, struct uwb_rccb **, size_t *);
+	int (*filter_event)(struct uwb_rc *, struct uwb_rceb **, const size_t,
+			    size_t *, size_t *);
+
+	spinlock_t neh_lock;		/* protects neh_* and ctx_* */
+	struct list_head neh_list;	/* Open NE handles */
+	unsigned long ctx_bm[UWB_RC_CTX_MAX / 8 / sizeof(unsigned long)];
+	u8 ctx_roll;
+
+	int beaconing;			/* Beaconing state [channel number] */
+	int beaconing_forced;
+	int scanning;
+	enum uwb_scan_type scan_type:3;
+	unsigned ready:1;
+	struct uwb_notifs_chain notifs_chain;
+	struct uwb_beca uwb_beca;
+
+	struct uwbd uwbd;
+
+	struct uwb_drp_backoff_win bow;
+	struct uwb_drp_avail drp_avail;
+	struct list_head reservations;
+	struct list_head cnflt_alien_list;
+	struct uwb_mas_bm cnflt_alien_bitmap;
+	struct mutex rsvs_mutex;
+	spinlock_t rsvs_lock;
+	struct workqueue_struct *rsv_workq;
+
+	struct delayed_work rsv_update_work;
+	struct delayed_work rsv_alien_bp_work;
+	int set_drp_ie_pending;
+	struct mutex ies_mutex;
+	struct uwb_rc_cmd_set_ie *ies;
+	size_t ies_capacity;
+
+	struct list_head pals;
+	int active_pals;
+
+	struct uwb_dbg *dbg;
+};
+
+
+/**
+ * struct uwb_pal - a UWB PAL
+ * @name:    descriptive name for this PAL (wusbhc, wlp, etc.).
+ * @device:  a device for the PAL.  Used to link the PAL and the radio
+ *           controller in sysfs.
+ * @rc:      the radio controller the PAL uses.
+ * @channel_changed: called when the channel used by the radio changes.
+ *           A channel of -1 means the channel has been stopped.
+ * @new_rsv: called when a peer requests a reservation (may be NULL if
+ *           the PAL cannot accept reservation requests).
+ * @channel: channel being used by the PAL; 0 if the PAL isn't using
+ *           the radio; -1 if the PAL wishes to use the radio but
+ *           cannot.
+ * @debugfs_dir: a debugfs directory which the PAL can use for its own
+ *           debugfs files.
+ *
+ * A Protocol Adaptation Layer (PAL) is a user of the WiMedia UWB
+ * radio platform (e.g., WUSB, WLP or Bluetooth UWB AMP).
+ *
+ * The PALs using a radio controller must register themselves to
+ * permit the UWB stack to coordinate usage of the radio between the
+ * various PALs or to allow PALs to response to certain requests from
+ * peers.
+ *
+ * A struct uwb_pal should be embedded in a containing structure
+ * belonging to the PAL and initialized with uwb_pal_init()).  Fields
+ * should be set appropriately by the PAL before registering the PAL
+ * with uwb_pal_register().
+ */
+struct uwb_pal {
+	struct list_head node;
+	const char *name;
+	struct device *device;
+	struct uwb_rc *rc;
+
+	void (*channel_changed)(struct uwb_pal *pal, int channel);
+	void (*new_rsv)(struct uwb_pal *pal, struct uwb_rsv *rsv);
+
+	int channel;
+	struct dentry *debugfs_dir;
+};
+
+void uwb_pal_init(struct uwb_pal *pal);
+int uwb_pal_register(struct uwb_pal *pal);
+void uwb_pal_unregister(struct uwb_pal *pal);
+
+int uwb_radio_start(struct uwb_pal *pal);
+void uwb_radio_stop(struct uwb_pal *pal);
+
+/*
+ * General public API
+ *
+ * This API can be used by UWB device drivers or by those implementing
+ * UWB Radio Controllers
+ */
+struct uwb_dev *uwb_dev_get_by_devaddr(struct uwb_rc *rc,
+				       const struct uwb_dev_addr *devaddr);
+struct uwb_dev *uwb_dev_get_by_rc(struct uwb_dev *, struct uwb_rc *);
+static inline void uwb_dev_get(struct uwb_dev *uwb_dev)
+{
+	get_device(&uwb_dev->dev);
+}
+static inline void uwb_dev_put(struct uwb_dev *uwb_dev)
+{
+	put_device(&uwb_dev->dev);
+}
+struct uwb_dev *uwb_dev_try_get(struct uwb_rc *rc, struct uwb_dev *uwb_dev);
+
+/**
+ * Callback function for 'uwb_{dev,rc}_foreach()'.
+ *
+ * @dev:  Linux device instance
+ *        'uwb_dev = container_of(dev, struct uwb_dev, dev)'
+ * @priv: Data passed by the caller to 'uwb_{dev,rc}_foreach()'.
+ *
+ * @returns: 0 to continue the iterations, any other val to stop
+ *           iterating and return the value to the caller of
+ *           _foreach().
+ */
+typedef int (*uwb_dev_for_each_f)(struct device *dev, void *priv);
+int uwb_dev_for_each(struct uwb_rc *rc, uwb_dev_for_each_f func, void *priv);
+
+struct uwb_rc *uwb_rc_alloc(void);
+struct uwb_rc *uwb_rc_get_by_dev(const struct uwb_dev_addr *);
+struct uwb_rc *uwb_rc_get_by_grandpa(const struct device *);
+void uwb_rc_put(struct uwb_rc *rc);
+
+typedef void (*uwb_rc_cmd_cb_f)(struct uwb_rc *rc, void *arg,
+                                struct uwb_rceb *reply, ssize_t reply_size);
+
+int uwb_rc_cmd_async(struct uwb_rc *rc, const char *cmd_name,
+		     struct uwb_rccb *cmd, size_t cmd_size,
+		     u8 expected_type, u16 expected_event,
+		     uwb_rc_cmd_cb_f cb, void *arg);
+ssize_t uwb_rc_cmd(struct uwb_rc *rc, const char *cmd_name,
+		   struct uwb_rccb *cmd, size_t cmd_size,
+		   struct uwb_rceb *reply, size_t reply_size);
+ssize_t uwb_rc_vcmd(struct uwb_rc *rc, const char *cmd_name,
+		    struct uwb_rccb *cmd, size_t cmd_size,
+		    u8 expected_type, u16 expected_event,
+		    struct uwb_rceb **preply);
+
+size_t __uwb_addr_print(char *, size_t, const unsigned char *, int);
+
+int uwb_rc_dev_addr_set(struct uwb_rc *, const struct uwb_dev_addr *);
+int uwb_rc_dev_addr_get(struct uwb_rc *, struct uwb_dev_addr *);
+int uwb_rc_mac_addr_set(struct uwb_rc *, const struct uwb_mac_addr *);
+int uwb_rc_mac_addr_get(struct uwb_rc *, struct uwb_mac_addr *);
+int __uwb_mac_addr_assigned_check(struct device *, void *);
+int __uwb_dev_addr_assigned_check(struct device *, void *);
+
+/* Print in @buf a pretty repr of @addr */
+static inline size_t uwb_dev_addr_print(char *buf, size_t buf_size,
+					const struct uwb_dev_addr *addr)
+{
+	return __uwb_addr_print(buf, buf_size, addr->data, 0);
+}
+
+/* Print in @buf a pretty repr of @addr */
+static inline size_t uwb_mac_addr_print(char *buf, size_t buf_size,
+					const struct uwb_mac_addr *addr)
+{
+	return __uwb_addr_print(buf, buf_size, addr->data, 1);
+}
+
+/* @returns 0 if device addresses @addr2 and @addr1 are equal */
+static inline int uwb_dev_addr_cmp(const struct uwb_dev_addr *addr1,
+				   const struct uwb_dev_addr *addr2)
+{
+	return memcmp(addr1, addr2, sizeof(*addr1));
+}
+
+/* @returns 0 if MAC addresses @addr2 and @addr1 are equal */
+static inline int uwb_mac_addr_cmp(const struct uwb_mac_addr *addr1,
+				   const struct uwb_mac_addr *addr2)
+{
+	return memcmp(addr1, addr2, sizeof(*addr1));
+}
+
+/* @returns !0 if a MAC @addr is a broadcast address */
+static inline int uwb_mac_addr_bcast(const struct uwb_mac_addr *addr)
+{
+	struct uwb_mac_addr bcast = {
+		.data = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }
+	};
+	return !uwb_mac_addr_cmp(addr, &bcast);
+}
+
+/* @returns !0 if a MAC @addr is all zeroes*/
+static inline int uwb_mac_addr_unset(const struct uwb_mac_addr *addr)
+{
+	struct uwb_mac_addr unset = {
+		.data = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }
+	};
+	return !uwb_mac_addr_cmp(addr, &unset);
+}
+
+/* @returns !0 if the address is in use. */
+static inline unsigned __uwb_dev_addr_assigned(struct uwb_rc *rc,
+					       struct uwb_dev_addr *addr)
+{
+	return uwb_dev_for_each(rc, __uwb_dev_addr_assigned_check, addr);
+}
+
+/*
+ * UWB Radio Controller API
+ *
+ * This API is used (in addition to the general API) to implement UWB
+ * Radio Controllers.
+ */
+void uwb_rc_init(struct uwb_rc *);
+int uwb_rc_add(struct uwb_rc *, struct device *dev, void *rc_priv);
+void uwb_rc_rm(struct uwb_rc *);
+void uwb_rc_neh_grok(struct uwb_rc *, void *, size_t);
+void uwb_rc_neh_error(struct uwb_rc *, int);
+void uwb_rc_reset_all(struct uwb_rc *rc);
+void uwb_rc_pre_reset(struct uwb_rc *rc);
+int uwb_rc_post_reset(struct uwb_rc *rc);
+
+/**
+ * uwb_rsv_is_owner - is the owner of this reservation the RC?
+ * @rsv: the reservation
+ */
+static inline bool uwb_rsv_is_owner(struct uwb_rsv *rsv)
+{
+	return rsv->owner == &rsv->rc->uwb_dev;
+}
+
+/**
+ * enum uwb_notifs - UWB events that can be passed to any listeners
+ * @UWB_NOTIF_ONAIR: a new neighbour has joined the beacon group.
+ * @UWB_NOTIF_OFFAIR: a neighbour has left the beacon group.
+ *
+ * Higher layers can register callback functions with the radio
+ * controller using uwb_notifs_register(). The radio controller
+ * maintains a list of all registered handlers and will notify all
+ * nodes when an event occurs.
+ */
+enum uwb_notifs {
+	UWB_NOTIF_ONAIR,
+	UWB_NOTIF_OFFAIR,
+};
+
+/* Callback function registered with UWB */
+struct uwb_notifs_handler {
+	struct list_head list_node;
+	void (*cb)(void *, struct uwb_dev *, enum uwb_notifs);
+	void *data;
+};
+
+int uwb_notifs_register(struct uwb_rc *, struct uwb_notifs_handler *);
+int uwb_notifs_deregister(struct uwb_rc *, struct uwb_notifs_handler *);
+
+
+/**
+ * UWB radio controller Event Size Entry (for creating entry tables)
+ *
+ * WUSB and WHCI define events and notifications, and they might have
+ * fixed or variable size.
+ *
+ * Each event/notification has a size which is not necessarily known
+ * in advance based on the event code. As well, vendor specific
+ * events/notifications will have a size impossible to determine
+ * unless we know about the device's specific details.
+ *
+ * It was way too smart of the spec writers not to think that it would
+ * be impossible for a generic driver to skip over vendor specific
+ * events/notifications if there are no LENGTH fields in the HEADER of
+ * each message...the transaction size cannot be counted on as the
+ * spec does not forbid to pack more than one event in a single
+ * transaction.
+ *
+ * Thus, we guess sizes with tables (or for events, when you know the
+ * size ahead of time you can use uwb_rc_neh_extra_size*()). We
+ * register tables with the known events and their sizes, and then we
+ * traverse those tables. For those with variable length, we provide a
+ * way to lookup the size inside the event/notification's
+ * payload. This allows device-specific event size tables to be
+ * registered.
+ *
+ * @size:   Size of the payload
+ *
+ * @offset: if != 0, at offset @offset-1 starts a field with a length
+ *          that has to be added to @size. The format of the field is
+ *          given by @type.
+ *
+ * @type:   Type and length of the offset field. Most common is LE 16
+ *          bits (that's why that is zero); others are there mostly to
+ *          cover for bugs and weirdos.
+ */
+struct uwb_est_entry {
+	size_t size;
+	unsigned offset;
+	enum { UWB_EST_16 = 0, UWB_EST_8 = 1 } type;
+};
+
+int uwb_est_register(u8 type, u8 code_high, u16 vendor, u16 product,
+		     const struct uwb_est_entry *, size_t entries);
+int uwb_est_unregister(u8 type, u8 code_high, u16 vendor, u16 product,
+		       const struct uwb_est_entry *, size_t entries);
+ssize_t uwb_est_find_size(struct uwb_rc *rc, const struct uwb_rceb *rceb,
+			  size_t len);
+
+/* -- Misc */
+
+enum {
+	EDC_MAX_ERRORS = 10,
+	EDC_ERROR_TIMEFRAME = HZ,
+};
+
+/* error density counter */
+struct edc {
+	unsigned long timestart;
+	u16 errorcount;
+};
+
+static inline
+void edc_init(struct edc *edc)
+{
+	edc->timestart = jiffies;
+}
+
+/* Called when an error occurred.
+ * This is way to determine if the number of acceptable errors per time
+ * period has been exceeded. It is not accurate as there are cases in which
+ * this scheme will not work, for example if there are periodic occurrences
+ * of errors that straddle updates to the start time. This scheme is
+ * sufficient for our usage.
+ *
+ * @returns 1 if maximum acceptable errors per timeframe has been exceeded.
+ */
+static inline int edc_inc(struct edc *err_hist, u16 max_err, u16 timeframe)
+{
+	unsigned long now;
+
+	now = jiffies;
+	if (now - err_hist->timestart > timeframe) {
+		err_hist->errorcount = 1;
+		err_hist->timestart = now;
+	} else if (++err_hist->errorcount > max_err) {
+			err_hist->errorcount = 0;
+			err_hist->timestart = now;
+			return 1;
+	}
+	return 0;
+}
+
+
+/* Information Element handling */
+
+struct uwb_ie_hdr *uwb_ie_next(void **ptr, size_t *len);
+int uwb_rc_ie_add(struct uwb_rc *uwb_rc, const struct uwb_ie_hdr *ies, size_t size);
+int uwb_rc_ie_rm(struct uwb_rc *uwb_rc, enum uwb_ie element_id);
+
+/*
+ * Transmission statistics
+ *
+ * UWB uses LQI and RSSI (one byte values) for reporting radio signal
+ * strength and line quality indication. We do quick and dirty
+ * averages of those. They are signed values, btw.
+ *
+ * For 8 bit quantities, we keep the min, the max, an accumulator
+ * (@sigma) and a # of samples. When @samples gets to 255, we compute
+ * the average (@sigma / @samples), place it in @sigma and reset
+ * @samples to 1 (so we use it as the first sample).
+ *
+ * Now, statistically speaking, probably I am kicking the kidneys of
+ * some books I have in my shelves collecting dust, but I just want to
+ * get an approx, not the Nobel.
+ *
+ * LOCKING: there is no locking per se, but we try to keep a lockless
+ * schema. Only _add_samples() modifies the values--as long as you
+ * have other locking on top that makes sure that no two calls of
+ * _add_sample() happen at the same time, then we are fine. Now, for
+ * resetting the values we just set @samples to 0 and that makes the
+ * next _add_sample() to start with defaults. Reading the values in
+ * _show() currently can race, so you need to make sure the calls are
+ * under the same lock that protects calls to _add_sample(). FIXME:
+ * currently unlocked (It is not ultraprecise but does the trick. Bite
+ * me).
+ */
+struct stats {
+	s8 min, max;
+	s16 sigma;
+	atomic_t samples;
+};
+
+static inline
+void stats_init(struct stats *stats)
+{
+	atomic_set(&stats->samples, 0);
+	wmb();
+}
+
+static inline
+void stats_add_sample(struct stats *stats, s8 sample)
+{
+	s8 min, max;
+	s16 sigma;
+	unsigned samples = atomic_read(&stats->samples);
+	if (samples == 0) {	/* it was zero before, so we initialize */
+		min = 127;
+		max = -128;
+		sigma = 0;
+	} else {
+		min = stats->min;
+		max = stats->max;
+		sigma = stats->sigma;
+	}
+
+	if (sample < min)	/* compute new values */
+		min = sample;
+	else if (sample > max)
+		max = sample;
+	sigma += sample;
+
+	stats->min = min;	/* commit */
+	stats->max = max;
+	stats->sigma = sigma;
+	if (atomic_add_return(1, &stats->samples) > 255) {
+		/* wrapped around! reset */
+		stats->sigma = sigma / 256;
+		atomic_set(&stats->samples, 1);
+	}
+}
+
+static inline ssize_t stats_show(struct stats *stats, char *buf)
+{
+	int min, max, avg;
+	int samples = atomic_read(&stats->samples);
+	if (samples == 0)
+		min = max = avg = 0;
+	else {
+		min = stats->min;
+		max = stats->max;
+		avg = stats->sigma / samples;
+	}
+	return scnprintf(buf, PAGE_SIZE, "%d %d %d\n", min, max, avg);
+}
+
+static inline ssize_t stats_store(struct stats *stats, const char *buf,
+				  size_t size)
+{
+	stats_init(stats);
+	return size;
+}
+
+#endif /* #ifndef __LINUX__UWB_H__ */
diff --git a/include/linux/uwb/debug-cmd.h b/include/linux/uwb/debug-cmd.h
new file mode 100644
index 00000000..8da004e2
--- /dev/null
+++ b/include/linux/uwb/debug-cmd.h
@@ -0,0 +1,68 @@
+/*
+ * Ultra Wide Band
+ * Debug interface commands
+ *
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __LINUX__UWB__DEBUG_CMD_H__
+#define __LINUX__UWB__DEBUG_CMD_H__
+
+#include <linux/types.h>
+
+/*
+ * Debug interface commands
+ *
+ * UWB_DBG_CMD_RSV_ESTABLISH: Establish a new unicast reservation.
+ *
+ * UWB_DBG_CMD_RSV_TERMINATE: Terminate the Nth reservation.
+ */
+
+enum uwb_dbg_cmd_type {
+	UWB_DBG_CMD_RSV_ESTABLISH = 1,
+	UWB_DBG_CMD_RSV_TERMINATE = 2,
+	UWB_DBG_CMD_IE_ADD = 3,
+	UWB_DBG_CMD_IE_RM = 4,
+	UWB_DBG_CMD_RADIO_START = 5,
+	UWB_DBG_CMD_RADIO_STOP = 6,
+};
+
+struct uwb_dbg_cmd_rsv_establish {
+	__u8  target[6];
+	__u8  type;
+	__u16 max_mas;
+	__u16 min_mas;
+	__u8  max_interval;
+};
+
+struct uwb_dbg_cmd_rsv_terminate {
+	int index;
+};
+
+struct uwb_dbg_cmd_ie {
+	__u8 data[128];
+	int len;
+};
+
+struct uwb_dbg_cmd {
+	__u32 type;
+	union {
+		struct uwb_dbg_cmd_rsv_establish rsv_establish;
+		struct uwb_dbg_cmd_rsv_terminate rsv_terminate;
+		struct uwb_dbg_cmd_ie ie_add;
+		struct uwb_dbg_cmd_ie ie_rm;
+	};
+};
+
+#endif /* #ifndef __LINUX__UWB__DEBUG_CMD_H__ */
diff --git a/include/linux/uwb/spec.h b/include/linux/uwb/spec.h
new file mode 100644
index 00000000..b52e44f1
--- /dev/null
+++ b/include/linux/uwb/spec.h
@@ -0,0 +1,780 @@
+/*
+ * Ultra Wide Band
+ * UWB Standard definitions
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * All these definitions are based on the ECMA-368 standard.
+ *
+ * Note all definitions are Little Endian in the wire, and we will
+ * convert them to host order before operating on the bitfields (that
+ * yes, we use extensively).
+ */
+
+#ifndef __LINUX__UWB_SPEC_H__
+#define __LINUX__UWB_SPEC_H__
+
+#include <linux/types.h>
+#include <linux/bitmap.h>
+
+#define i1480_FW 0x00000303
+/* #define i1480_FW 0x00000302 */
+
+/**
+ * Number of Medium Access Slots in a superframe.
+ *
+ * UWB divides time in SuperFrames, each one divided in 256 pieces, or
+ * Medium Access Slots. See MBOA MAC[5.4.5] for details. The MAS is the
+ * basic bandwidth allocation unit in UWB.
+ */
+enum { UWB_NUM_MAS = 256 };
+
+/**
+ * Number of Zones in superframe.
+ *
+ * UWB divides the superframe into zones with numbering starting from BPST.
+ * See MBOA MAC[16.8.6]
+ */
+enum { UWB_NUM_ZONES = 16 };
+
+/*
+ * Number of MAS in a zone.
+ */
+#define UWB_MAS_PER_ZONE (UWB_NUM_MAS / UWB_NUM_ZONES)
+
+/*
+ * Number of MAS required before a row can be considered available.
+ */
+#define UWB_USABLE_MAS_PER_ROW (UWB_NUM_ZONES - 1)
+
+/*
+ * Number of streams per DRP reservation between a pair of devices.
+ *
+ * [ECMA-368] section 16.8.6.
+ */
+enum { UWB_NUM_STREAMS = 8 };
+
+/*
+ * mMasLength
+ *
+ * The length of a MAS in microseconds.
+ *
+ * [ECMA-368] section 17.16.
+ */
+enum { UWB_MAS_LENGTH_US = 256 };
+
+/*
+ * mBeaconSlotLength
+ *
+ * The length of the beacon slot in microseconds.
+ *
+ * [ECMA-368] section 17.16
+ */
+enum { UWB_BEACON_SLOT_LENGTH_US = 85 };
+
+/*
+ * mMaxLostBeacons
+ *
+ * The number beacons missing in consecutive superframes before a
+ * device can be considered as unreachable.
+ *
+ * [ECMA-368] section 17.16
+ */
+enum { UWB_MAX_LOST_BEACONS = 3 };
+
+/*
+ * mDRPBackOffWinMin
+ *
+ * The minimum number of superframes to wait before trying to reserve
+ * extra MAS.
+ *
+ * [ECMA-368] section 17.16
+ */
+enum { UWB_DRP_BACKOFF_WIN_MIN = 2 };
+
+/*
+ * mDRPBackOffWinMax
+ *
+ * The maximum number of superframes to wait before trying to reserve
+ * extra MAS.
+ *
+ * [ECMA-368] section 17.16
+ */
+enum { UWB_DRP_BACKOFF_WIN_MAX = 16 };
+
+/*
+ * Length of a superframe in microseconds.
+ */
+#define UWB_SUPERFRAME_LENGTH_US (UWB_MAS_LENGTH_US * UWB_NUM_MAS)
+
+/**
+ * UWB MAC address
+ *
+ * It is *imperative* that this struct is exactly 6 packed bytes (as
+ * it is also used to define headers sent down and up the wire/radio).
+ */
+struct uwb_mac_addr {
+	u8 data[6];
+} __attribute__((packed));
+
+
+/**
+ * UWB device address
+ *
+ * It is *imperative* that this struct is exactly 6 packed bytes (as
+ * it is also used to define headers sent down and up the wire/radio).
+ */
+struct uwb_dev_addr {
+	u8 data[2];
+} __attribute__((packed));
+
+
+/**
+ * Types of UWB addresses
+ *
+ * Order matters (by size).
+ */
+enum uwb_addr_type {
+	UWB_ADDR_DEV = 0,
+	UWB_ADDR_MAC = 1,
+};
+
+
+/** Size of a char buffer for printing a MAC/device address */
+enum { UWB_ADDR_STRSIZE = 32 };
+
+
+/** UWB WiMedia protocol IDs. */
+enum uwb_prid {
+	UWB_PRID_WLP_RESERVED   = 0x0000,
+	UWB_PRID_WLP		= 0x0001,
+	UWB_PRID_WUSB_BOT	= 0x0010,
+	UWB_PRID_WUSB		= 0x0010,
+	UWB_PRID_WUSB_TOP	= 0x001F,
+};
+
+
+/** PHY Rate (MBOA MAC[7.8.12, Table 61]) */
+enum uwb_phy_rate {
+	UWB_PHY_RATE_53 = 0,
+	UWB_PHY_RATE_80,
+	UWB_PHY_RATE_106,
+	UWB_PHY_RATE_160,
+	UWB_PHY_RATE_200,
+	UWB_PHY_RATE_320,
+	UWB_PHY_RATE_400,
+	UWB_PHY_RATE_480,
+	UWB_PHY_RATE_INVALID
+};
+
+
+/**
+ * Different ways to scan (MBOA MAC[6.2.2, Table 8], WUSB[Table 8-78])
+ */
+enum uwb_scan_type {
+	UWB_SCAN_ONLY = 0,
+	UWB_SCAN_OUTSIDE_BP,
+	UWB_SCAN_WHILE_INACTIVE,
+	UWB_SCAN_DISABLED,
+	UWB_SCAN_ONLY_STARTTIME,
+	UWB_SCAN_TOP
+};
+
+
+/** ACK Policy types (MBOA MAC[7.2.1.3]) */
+enum uwb_ack_pol {
+	UWB_ACK_NO = 0,
+	UWB_ACK_INM = 1,
+	UWB_ACK_B = 2,
+	UWB_ACK_B_REQ = 3,
+};
+
+
+/** DRP reservation types ([ECMA-368 table 106) */
+enum uwb_drp_type {
+	UWB_DRP_TYPE_ALIEN_BP = 0,
+	UWB_DRP_TYPE_HARD,
+	UWB_DRP_TYPE_SOFT,
+	UWB_DRP_TYPE_PRIVATE,
+	UWB_DRP_TYPE_PCA,
+};
+
+
+/** DRP Reason Codes ([ECMA-368] table 107) */
+enum uwb_drp_reason {
+	UWB_DRP_REASON_ACCEPTED = 0,
+	UWB_DRP_REASON_CONFLICT,
+	UWB_DRP_REASON_PENDING,
+	UWB_DRP_REASON_DENIED,
+	UWB_DRP_REASON_MODIFIED,
+};
+
+/** Relinquish Request Reason Codes ([ECMA-368] table 113) */
+enum uwb_relinquish_req_reason {
+	UWB_RELINQUISH_REQ_REASON_NON_SPECIFIC = 0,
+	UWB_RELINQUISH_REQ_REASON_OVER_ALLOCATION,
+};
+
+/**
+ *  DRP Notification Reason Codes (WHCI 0.95 [3.1.4.9])
+ */
+enum uwb_drp_notif_reason {
+	UWB_DRP_NOTIF_DRP_IE_RCVD = 0,
+	UWB_DRP_NOTIF_CONFLICT,
+	UWB_DRP_NOTIF_TERMINATE,
+};
+
+
+/** Allocation of MAS slots in a DRP request MBOA MAC[7.8.7] */
+struct uwb_drp_alloc {
+	__le16 zone_bm;
+	__le16 mas_bm;
+} __attribute__((packed));
+
+
+/** General MAC Header format (ECMA-368[16.2]) */
+struct uwb_mac_frame_hdr {
+	__le16 Frame_Control;
+	struct uwb_dev_addr DestAddr;
+	struct uwb_dev_addr SrcAddr;
+	__le16 Sequence_Control;
+	__le16 Access_Information;
+} __attribute__((packed));
+
+
+/**
+ * uwb_beacon_frame - a beacon frame including MAC headers
+ *
+ * [ECMA] section 16.3.
+ */
+struct uwb_beacon_frame {
+	struct uwb_mac_frame_hdr hdr;
+	struct uwb_mac_addr Device_Identifier;	/* may be a NULL EUI-48 */
+	u8 Beacon_Slot_Number;
+	u8 Device_Control;
+	u8 IEData[];
+} __attribute__((packed));
+
+
+/** Information Element codes (MBOA MAC[T54]) */
+enum uwb_ie {
+	UWB_PCA_AVAILABILITY = 2,
+	UWB_IE_DRP_AVAILABILITY = 8,
+	UWB_IE_DRP = 9,
+	UWB_BP_SWITCH_IE = 11,
+	UWB_MAC_CAPABILITIES_IE = 12,
+	UWB_PHY_CAPABILITIES_IE = 13,
+	UWB_APP_SPEC_PROBE_IE = 15,
+	UWB_IDENTIFICATION_IE = 19,
+	UWB_MASTER_KEY_ID_IE = 20,
+	UWB_RELINQUISH_REQUEST_IE = 21,
+	UWB_IE_WLP = 250, /* WiMedia Logical Link Control Protocol WLP 0.99 */
+	UWB_APP_SPEC_IE = 255,
+};
+
+
+/**
+ * Header common to all Information Elements (IEs)
+ */
+struct uwb_ie_hdr {
+	u8 element_id;	/* enum uwb_ie */
+	u8 length;
+} __attribute__((packed));
+
+
+/** Dynamic Reservation Protocol IE (MBOA MAC[7.8.6]) */
+struct uwb_ie_drp {
+	struct uwb_ie_hdr	hdr;
+	__le16                  drp_control;
+	struct uwb_dev_addr	dev_addr;
+	struct uwb_drp_alloc	allocs[];
+} __attribute__((packed));
+
+static inline int uwb_ie_drp_type(struct uwb_ie_drp *ie)
+{
+	return (le16_to_cpu(ie->drp_control) >> 0) & 0x7;
+}
+
+static inline int uwb_ie_drp_stream_index(struct uwb_ie_drp *ie)
+{
+	return (le16_to_cpu(ie->drp_control) >> 3) & 0x7;
+}
+
+static inline int uwb_ie_drp_reason_code(struct uwb_ie_drp *ie)
+{
+	return (le16_to_cpu(ie->drp_control) >> 6) & 0x7;
+}
+
+static inline int uwb_ie_drp_status(struct uwb_ie_drp *ie)
+{
+	return (le16_to_cpu(ie->drp_control) >> 9) & 0x1;
+}
+
+static inline int uwb_ie_drp_owner(struct uwb_ie_drp *ie)
+{
+	return (le16_to_cpu(ie->drp_control) >> 10) & 0x1;
+}
+
+static inline int uwb_ie_drp_tiebreaker(struct uwb_ie_drp *ie)
+{
+	return (le16_to_cpu(ie->drp_control) >> 11) & 0x1;
+}
+
+static inline int uwb_ie_drp_unsafe(struct uwb_ie_drp *ie)
+{
+	return (le16_to_cpu(ie->drp_control) >> 12) & 0x1;
+}
+
+static inline void uwb_ie_drp_set_type(struct uwb_ie_drp *ie, enum uwb_drp_type type)
+{
+	u16 drp_control = le16_to_cpu(ie->drp_control);
+	drp_control = (drp_control & ~(0x7 << 0)) | (type << 0);
+	ie->drp_control = cpu_to_le16(drp_control);
+}
+
+static inline void uwb_ie_drp_set_stream_index(struct uwb_ie_drp *ie, int stream_index)
+{
+	u16 drp_control = le16_to_cpu(ie->drp_control);
+	drp_control = (drp_control & ~(0x7 << 3)) | (stream_index << 3);
+	ie->drp_control = cpu_to_le16(drp_control);
+}
+
+static inline void uwb_ie_drp_set_reason_code(struct uwb_ie_drp *ie,
+				       enum uwb_drp_reason reason_code)
+{
+	u16 drp_control = le16_to_cpu(ie->drp_control);
+	drp_control = (ie->drp_control & ~(0x7 << 6)) | (reason_code << 6);
+	ie->drp_control = cpu_to_le16(drp_control);
+}
+
+static inline void uwb_ie_drp_set_status(struct uwb_ie_drp *ie, int status)
+{
+	u16 drp_control = le16_to_cpu(ie->drp_control);
+	drp_control = (drp_control & ~(0x1 << 9)) | (status << 9);
+	ie->drp_control = cpu_to_le16(drp_control);
+}
+
+static inline void uwb_ie_drp_set_owner(struct uwb_ie_drp *ie, int owner)
+{
+	u16 drp_control = le16_to_cpu(ie->drp_control);
+	drp_control = (drp_control & ~(0x1 << 10)) | (owner << 10);
+	ie->drp_control = cpu_to_le16(drp_control);
+}
+
+static inline void uwb_ie_drp_set_tiebreaker(struct uwb_ie_drp *ie, int tiebreaker)
+{
+	u16 drp_control = le16_to_cpu(ie->drp_control);
+	drp_control = (drp_control & ~(0x1 << 11)) | (tiebreaker << 11);
+	ie->drp_control = cpu_to_le16(drp_control);
+}
+
+static inline void uwb_ie_drp_set_unsafe(struct uwb_ie_drp *ie, int unsafe)
+{
+	u16 drp_control = le16_to_cpu(ie->drp_control);
+	drp_control = (drp_control & ~(0x1 << 12)) | (unsafe << 12);
+	ie->drp_control = cpu_to_le16(drp_control);
+}
+
+/** Dynamic Reservation Protocol IE (MBOA MAC[7.8.7]) */
+struct uwb_ie_drp_avail {
+	struct uwb_ie_hdr	hdr;
+	DECLARE_BITMAP(bmp, UWB_NUM_MAS);
+} __attribute__((packed));
+
+/* Relinqish Request IE ([ECMA-368] section 16.8.19). */
+struct uwb_relinquish_request_ie {
+        struct uwb_ie_hdr       hdr;
+        __le16                  relinquish_req_control;
+        struct uwb_dev_addr     dev_addr;
+        struct uwb_drp_alloc    allocs[];
+} __attribute__((packed));
+
+static inline int uwb_ie_relinquish_req_reason_code(struct uwb_relinquish_request_ie *ie)
+{
+	return (le16_to_cpu(ie->relinquish_req_control) >> 0) & 0xf;
+}
+
+static inline void uwb_ie_relinquish_req_set_reason_code(struct uwb_relinquish_request_ie *ie,
+							 int reason_code)
+{
+	u16 ctrl = le16_to_cpu(ie->relinquish_req_control);
+	ctrl = (ctrl & ~(0xf << 0)) | (reason_code << 0);
+	ie->relinquish_req_control = cpu_to_le16(ctrl);
+}
+
+/**
+ * The Vendor ID is set to an OUI that indicates the vendor of the device.
+ * ECMA-368 [16.8.10]
+ */
+struct uwb_vendor_id {
+	u8 data[3];
+} __attribute__((packed));
+
+/**
+ * The device type ID
+ * FIXME: clarify what this means
+ * ECMA-368 [16.8.10]
+ */
+struct uwb_device_type_id {
+	u8 data[3];
+} __attribute__((packed));
+
+
+/**
+ * UWB device information types
+ * ECMA-368 [16.8.10]
+ */
+enum uwb_dev_info_type {
+	UWB_DEV_INFO_VENDOR_ID = 0,
+	UWB_DEV_INFO_VENDOR_TYPE,
+	UWB_DEV_INFO_NAME,
+};
+
+/**
+ * UWB device information found in Identification IE
+ * ECMA-368 [16.8.10]
+ */
+struct uwb_dev_info {
+	u8 type;	/* enum uwb_dev_info_type */
+	u8 length;
+	u8 data[];
+} __attribute__((packed));
+
+/**
+ * UWB Identification IE
+ * ECMA-368 [16.8.10]
+ */
+struct uwb_identification_ie {
+	struct uwb_ie_hdr hdr;
+	struct uwb_dev_info info[];
+} __attribute__((packed));
+
+/*
+ * UWB Radio Controller
+ *
+ * These definitions are common to the Radio Control layers as
+ * exported by the WUSB1.0 HWA and WHCI interfaces.
+ */
+
+/** Radio Control Command Block (WUSB1.0[Table 8-65] and WHCI 0.95) */
+struct uwb_rccb {
+	u8 bCommandType;		/* enum hwa_cet */
+	__le16 wCommand;		/* Command code */
+	u8 bCommandContext;		/* Context ID */
+} __attribute__((packed));
+
+
+/** Radio Control Event Block (WUSB[table 8-66], WHCI 0.95) */
+struct uwb_rceb {
+	u8 bEventType;			/* enum hwa_cet */
+	__le16 wEvent;			/* Event code */
+	u8 bEventContext;		/* Context ID */
+} __attribute__((packed));
+
+
+enum {
+	UWB_RC_CET_GENERAL = 0,		/* General Command/Event type */
+	UWB_RC_CET_EX_TYPE_1 = 1,	/* Extended Type 1 Command/Event type */
+};
+
+/* Commands to the radio controller */
+enum uwb_rc_cmd {
+	UWB_RC_CMD_CHANNEL_CHANGE = 16,
+	UWB_RC_CMD_DEV_ADDR_MGMT = 17,	/* Device Address Management */
+	UWB_RC_CMD_GET_IE = 18,		/* GET Information Elements */
+	UWB_RC_CMD_RESET = 19,
+	UWB_RC_CMD_SCAN = 20,		/* Scan management  */
+	UWB_RC_CMD_SET_BEACON_FILTER = 21,
+	UWB_RC_CMD_SET_DRP_IE = 22,	/* Dynamic Reservation Protocol IEs */
+	UWB_RC_CMD_SET_IE = 23,		/* Information Element management */
+	UWB_RC_CMD_SET_NOTIFICATION_FILTER = 24,
+	UWB_RC_CMD_SET_TX_POWER = 25,
+	UWB_RC_CMD_SLEEP = 26,
+	UWB_RC_CMD_START_BEACON = 27,
+	UWB_RC_CMD_STOP_BEACON = 28,
+	UWB_RC_CMD_BP_MERGE = 29,
+	UWB_RC_CMD_SEND_COMMAND_FRAME = 30,
+	UWB_RC_CMD_SET_ASIE_NOTIF = 31,
+};
+
+/* Notifications from the radio controller */
+enum uwb_rc_evt {
+	UWB_RC_EVT_IE_RCV = 0,
+	UWB_RC_EVT_BEACON = 1,
+	UWB_RC_EVT_BEACON_SIZE = 2,
+	UWB_RC_EVT_BPOIE_CHANGE = 3,
+	UWB_RC_EVT_BP_SLOT_CHANGE = 4,
+	UWB_RC_EVT_BP_SWITCH_IE_RCV = 5,
+	UWB_RC_EVT_DEV_ADDR_CONFLICT = 6,
+	UWB_RC_EVT_DRP_AVAIL = 7,
+	UWB_RC_EVT_DRP = 8,
+	UWB_RC_EVT_BP_SWITCH_STATUS = 9,
+	UWB_RC_EVT_CMD_FRAME_RCV = 10,
+	UWB_RC_EVT_CHANNEL_CHANGE_IE_RCV = 11,
+	/* Events (command responses) use the same code as the command */
+	UWB_RC_EVT_UNKNOWN_CMD_RCV = 65535,
+};
+
+enum uwb_rc_extended_type_1_cmd {
+	UWB_RC_SET_DAA_ENERGY_MASK = 32,
+	UWB_RC_SET_NOTIFICATION_FILTER_EX = 33,
+};
+
+enum uwb_rc_extended_type_1_evt {
+	UWB_RC_DAA_ENERGY_DETECTED = 0,
+};
+
+/* Radio Control Result Code. [WHCI] table 3-3. */
+enum {
+	UWB_RC_RES_SUCCESS = 0,
+	UWB_RC_RES_FAIL,
+	UWB_RC_RES_FAIL_HARDWARE,
+	UWB_RC_RES_FAIL_NO_SLOTS,
+	UWB_RC_RES_FAIL_BEACON_TOO_LARGE,
+	UWB_RC_RES_FAIL_INVALID_PARAMETER,
+	UWB_RC_RES_FAIL_UNSUPPORTED_PWR_LEVEL,
+	UWB_RC_RES_FAIL_INVALID_IE_DATA,
+	UWB_RC_RES_FAIL_BEACON_SIZE_EXCEEDED,
+	UWB_RC_RES_FAIL_CANCELLED,
+	UWB_RC_RES_FAIL_INVALID_STATE,
+	UWB_RC_RES_FAIL_INVALID_SIZE,
+	UWB_RC_RES_FAIL_ACK_NOT_RECEIVED,
+	UWB_RC_RES_FAIL_NO_MORE_ASIE_NOTIF,
+	UWB_RC_RES_FAIL_TIME_OUT = 255,
+};
+
+/* Confirm event. [WHCI] section 3.1.3.1 etc. */
+struct uwb_rc_evt_confirm {
+	struct uwb_rceb rceb;
+	u8 bResultCode;
+} __attribute__((packed));
+
+/* Device Address Management event. [WHCI] section 3.1.3.2. */
+struct uwb_rc_evt_dev_addr_mgmt {
+	struct uwb_rceb rceb;
+	u8 baAddr[6];
+	u8 bResultCode;
+} __attribute__((packed));
+
+
+/* Get IE Event. [WHCI] section 3.1.3.3. */
+struct uwb_rc_evt_get_ie {
+	struct uwb_rceb rceb;
+	__le16 wIELength;
+	u8 IEData[];
+} __attribute__((packed));
+
+/* Set DRP IE Event. [WHCI] section 3.1.3.7. */
+struct uwb_rc_evt_set_drp_ie {
+	struct uwb_rceb rceb;
+	__le16 wRemainingSpace;
+	u8 bResultCode;
+} __attribute__((packed));
+
+/* Set IE Event. [WHCI] section 3.1.3.8. */
+struct uwb_rc_evt_set_ie {
+	struct uwb_rceb rceb;
+	__le16 RemainingSpace;
+	u8 bResultCode;
+} __attribute__((packed));
+
+/* Scan command. [WHCI] 3.1.3.5. */
+struct uwb_rc_cmd_scan {
+	struct uwb_rccb rccb;
+	u8 bChannelNumber;
+	u8 bScanState;
+	__le16 wStartTime;
+} __attribute__((packed));
+
+/* Set DRP IE command. [WHCI] section 3.1.3.7. */
+struct uwb_rc_cmd_set_drp_ie {
+	struct uwb_rccb rccb;
+	__le16 wIELength;
+	struct uwb_ie_drp IEData[];
+} __attribute__((packed));
+
+/* Set IE command. [WHCI] section 3.1.3.8. */
+struct uwb_rc_cmd_set_ie {
+	struct uwb_rccb rccb;
+	__le16 wIELength;
+	u8 IEData[];
+} __attribute__((packed));
+
+/* Set DAA Energy Mask event. [WHCI 0.96] section 3.1.3.17. */
+struct uwb_rc_evt_set_daa_energy_mask {
+	struct uwb_rceb rceb;
+	__le16 wLength;
+	u8 result;
+} __attribute__((packed));
+
+/* Set Notification Filter Extended event. [WHCI 0.96] section 3.1.3.18. */
+struct uwb_rc_evt_set_notification_filter_ex {
+	struct uwb_rceb rceb;
+	__le16 wLength;
+	u8 result;
+} __attribute__((packed));
+
+/* IE Received notification. [WHCI] section 3.1.4.1. */
+struct uwb_rc_evt_ie_rcv {
+	struct uwb_rceb rceb;
+	struct uwb_dev_addr SrcAddr;
+	__le16 wIELength;
+	u8 IEData[];
+} __attribute__((packed));
+
+/* Type of the received beacon. [WHCI] section 3.1.4.2. */
+enum uwb_rc_beacon_type {
+	UWB_RC_BEACON_TYPE_SCAN = 0,
+	UWB_RC_BEACON_TYPE_NEIGHBOR,
+	UWB_RC_BEACON_TYPE_OL_ALIEN,
+	UWB_RC_BEACON_TYPE_NOL_ALIEN,
+};
+
+/* Beacon received notification. [WHCI] 3.1.4.2. */
+struct uwb_rc_evt_beacon {
+	struct uwb_rceb rceb;
+	u8	bChannelNumber;
+	u8	bBeaconType;
+	__le16	wBPSTOffset;
+	u8	bLQI;
+	u8	bRSSI;
+	__le16	wBeaconInfoLength;
+	u8	BeaconInfo[];
+} __attribute__((packed));
+
+
+/* Beacon Size Change notification. [WHCI] section 3.1.4.3 */
+struct uwb_rc_evt_beacon_size {
+	struct uwb_rceb rceb;
+	__le16 wNewBeaconSize;
+} __attribute__((packed));
+
+
+/* BPOIE Change notification. [WHCI] section 3.1.4.4. */
+struct uwb_rc_evt_bpoie_change {
+	struct uwb_rceb rceb;
+	__le16 wBPOIELength;
+	u8 BPOIE[];
+} __attribute__((packed));
+
+
+/* Beacon Slot Change notification. [WHCI] section 3.1.4.5. */
+struct uwb_rc_evt_bp_slot_change {
+	struct uwb_rceb rceb;
+	u8 slot_info;
+} __attribute__((packed));
+
+static inline int uwb_rc_evt_bp_slot_change_slot_num(
+	const struct uwb_rc_evt_bp_slot_change *evt)
+{
+	return evt->slot_info & 0x7f;
+}
+
+static inline int uwb_rc_evt_bp_slot_change_no_slot(
+	const struct uwb_rc_evt_bp_slot_change *evt)
+{
+	return (evt->slot_info & 0x80) >> 7;
+}
+
+/* BP Switch IE Received notification. [WHCI] section 3.1.4.6. */
+struct uwb_rc_evt_bp_switch_ie_rcv {
+	struct uwb_rceb rceb;
+	struct uwb_dev_addr wSrcAddr;
+	__le16 wIELength;
+	u8 IEData[];
+} __attribute__((packed));
+
+/* DevAddr Conflict notification. [WHCI] section 3.1.4.7. */
+struct uwb_rc_evt_dev_addr_conflict {
+	struct uwb_rceb rceb;
+} __attribute__((packed));
+
+/* DRP notification. [WHCI] section 3.1.4.9. */
+struct uwb_rc_evt_drp {
+	struct uwb_rceb           rceb;
+	struct uwb_dev_addr       src_addr;
+	u8                        reason;
+	u8                        beacon_slot_number;
+	__le16                    ie_length;
+	u8                        ie_data[];
+} __attribute__((packed));
+
+static inline enum uwb_drp_notif_reason uwb_rc_evt_drp_reason(struct uwb_rc_evt_drp *evt)
+{
+	return evt->reason & 0x0f;
+}
+
+
+/* DRP Availability Change notification. [WHCI] section 3.1.4.8. */
+struct uwb_rc_evt_drp_avail {
+	struct uwb_rceb rceb;
+	DECLARE_BITMAP(bmp, UWB_NUM_MAS);
+} __attribute__((packed));
+
+/* BP switch status notification. [WHCI] section 3.1.4.10. */
+struct uwb_rc_evt_bp_switch_status {
+	struct uwb_rceb rceb;
+	u8 status;
+	u8 slot_offset;
+	__le16 bpst_offset;
+	u8 move_countdown;
+} __attribute__((packed));
+
+/* Command Frame Received notification. [WHCI] section 3.1.4.11. */
+struct uwb_rc_evt_cmd_frame_rcv {
+	struct uwb_rceb rceb;
+	__le16 receive_time;
+	struct uwb_dev_addr wSrcAddr;
+	struct uwb_dev_addr wDstAddr;
+	__le16 control;
+	__le16 reserved;
+	__le16 dataLength;
+	u8 data[];
+} __attribute__((packed));
+
+/* Channel Change IE Received notification. [WHCI] section 3.1.4.12. */
+struct uwb_rc_evt_channel_change_ie_rcv {
+	struct uwb_rceb rceb;
+	struct uwb_dev_addr wSrcAddr;
+	__le16 wIELength;
+	u8 IEData[];
+} __attribute__((packed));
+
+/* DAA Energy Detected notification. [WHCI 0.96] section 3.1.4.14. */
+struct uwb_rc_evt_daa_energy_detected {
+	struct uwb_rceb rceb;
+	__le16 wLength;
+	u8 bandID;
+	u8 reserved;
+	u8 toneBmp[16];
+} __attribute__((packed));
+
+
+/**
+ * Radio Control Interface Class Descriptor
+ *
+ *  WUSB 1.0 [8.6.1.2]
+ */
+struct uwb_rc_control_intf_class_desc {
+	u8 bLength;
+	u8 bDescriptorType;
+	__le16 bcdRCIVersion;
+} __attribute__((packed));
+
+#endif /* #ifndef __LINUX__UWB_SPEC_H__ */
diff --git a/include/linux/uwb/umc.h b/include/linux/uwb/umc.h
new file mode 100644
index 00000000..891d1d5f
--- /dev/null
+++ b/include/linux/uwb/umc.h
@@ -0,0 +1,195 @@
+/*
+ * UWB Multi-interface Controller support.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * This file is released under the GPLv2
+ *
+ * UMC (UWB Multi-interface Controller) capabilities (e.g., radio
+ * controller, host controller) are presented as devices on the "umc"
+ * bus.
+ *
+ * The radio controller is not strictly a UMC capability but it's
+ * useful to present it as such.
+ *
+ * References:
+ *
+ *   [WHCI] Wireless Host Controller Interface Specification for
+ *          Certified Wireless Universal Serial Bus, revision 0.95.
+ *
+ * How this works is kind of convoluted but simple. The whci.ko driver
+ * loads when WHCI devices are detected. These WHCI devices expose
+ * many devices in the same PCI function (they couldn't have reused
+ * functions, no), so for each PCI function that exposes these many
+ * devices, whci ceates a umc_dev [whci_probe() -> whci_add_cap()]
+ * with umc_device_create() and adds it to the bus with
+ * umc_device_register().
+ *
+ * umc_device_register() calls device_register() which will push the
+ * bus management code to load your UMC driver's somehting_probe()
+ * that you have registered for that capability code.
+ *
+ * Now when the WHCI device is removed, whci_remove() will go over
+ * each umc_dev assigned to each of the PCI function's capabilities
+ * and through whci_del_cap() call umc_device_unregister() each
+ * created umc_dev. Of course, if you are bound to the device, your
+ * driver's something_remove() will be called.
+ */
+
+#ifndef _LINUX_UWB_UMC_H_
+#define _LINUX_UWB_UMC_H_
+
+#include <linux/device.h>
+#include <linux/pci.h>
+
+/*
+ * UMC capability IDs.
+ *
+ * 0x00 is reserved so use it for the radio controller device.
+ *
+ * [WHCI] table 2-8
+ */
+#define UMC_CAP_ID_WHCI_RC      0x00 /* radio controller */
+#define UMC_CAP_ID_WHCI_WUSB_HC 0x01 /* WUSB host controller */
+
+/**
+ * struct umc_dev - UMC capability device
+ *
+ * @version:  version of the specification this capability conforms to.
+ * @cap_id:   capability ID.
+ * @bar:      PCI Bar (64 bit) where the resource lies
+ * @resource: register space resource.
+ * @irq:      interrupt line.
+ */
+struct umc_dev {
+	u16		version;
+	u8		cap_id;
+	u8		bar;
+	struct resource resource;
+	unsigned	irq;
+	struct device	dev;
+};
+
+#define to_umc_dev(d) container_of(d, struct umc_dev, dev)
+
+/**
+ * struct umc_driver - UMC capability driver
+ * @cap_id: supported capability ID.
+ * @match: driver specific capability matching function.
+ * @match_data: driver specific data for match() (e.g., a
+ * table of pci_device_id's if umc_match_pci_id() is used).
+ */
+struct umc_driver {
+	char *name;
+	u8 cap_id;
+	int (*match)(struct umc_driver *, struct umc_dev *);
+	const void *match_data;
+
+	int  (*probe)(struct umc_dev *);
+	void (*remove)(struct umc_dev *);
+	int  (*suspend)(struct umc_dev *, pm_message_t state);
+	int  (*resume)(struct umc_dev *);
+	int  (*pre_reset)(struct umc_dev *);
+	int  (*post_reset)(struct umc_dev *);
+
+	struct device_driver driver;
+};
+
+#define to_umc_driver(d) container_of(d, struct umc_driver, driver)
+
+extern struct bus_type umc_bus_type;
+
+struct umc_dev *umc_device_create(struct device *parent, int n);
+int __must_check umc_device_register(struct umc_dev *umc);
+void umc_device_unregister(struct umc_dev *umc);
+
+int __must_check __umc_driver_register(struct umc_driver *umc_drv,
+				       struct module *mod,
+				       const char *mod_name);
+
+/**
+ * umc_driver_register - register a UMC capabiltity driver.
+ * @umc_drv:  pointer to the driver.
+ */
+#define umc_driver_register(umc_drv) \
+	__umc_driver_register(umc_drv, THIS_MODULE, KBUILD_MODNAME)
+
+void umc_driver_unregister(struct umc_driver *umc_drv);
+
+/*
+ * Utility function you can use to match (umc_driver->match) against a
+ * null-terminated array of 'struct pci_device_id' in
+ * umc_driver->match_data.
+ */
+int umc_match_pci_id(struct umc_driver *umc_drv, struct umc_dev *umc);
+
+/**
+ * umc_parent_pci_dev - return the UMC's parent PCI device or NULL if none
+ * @umc_dev: UMC device whose parent PCI device we are looking for
+ *
+ * DIRTY!!! DON'T RELY ON THIS
+ *
+ * FIXME: This is as dirty as it gets, but we need some way to check
+ * the correct type of umc_dev->parent (so that for example, we can
+ * cast to pci_dev). Casting to pci_dev is necessary because at some
+ * point we need to request resources from the device. Mapping is
+ * easily over come (ioremap and stuff are bus agnostic), but hooking
+ * up to some error handlers (such as pci error handlers) might need
+ * this.
+ *
+ * THIS might (probably will) be removed in the future, so don't count
+ * on it.
+ */
+static inline struct pci_dev *umc_parent_pci_dev(struct umc_dev *umc_dev)
+{
+	struct pci_dev *pci_dev = NULL;
+	if (umc_dev->dev.parent->bus == &pci_bus_type)
+		pci_dev = to_pci_dev(umc_dev->dev.parent);
+	return pci_dev;
+}
+
+/**
+ * umc_dev_get() - reference a UMC device.
+ * @umc_dev: Pointer to UMC device.
+ *
+ * NOTE: we are assuming in this whole scheme that the parent device
+ *       is referenced at _probe() time and unreferenced at _remove()
+ *       time by the parent's subsystem.
+ */
+static inline struct umc_dev *umc_dev_get(struct umc_dev *umc_dev)
+{
+	get_device(&umc_dev->dev);
+	return umc_dev;
+}
+
+/**
+ * umc_dev_put() - unreference a UMC device.
+ * @umc_dev: Pointer to UMC device.
+ */
+static inline void umc_dev_put(struct umc_dev *umc_dev)
+{
+	put_device(&umc_dev->dev);
+}
+
+/**
+ * umc_set_drvdata - set UMC device's driver data.
+ * @umc_dev: Pointer to UMC device.
+ * @data:    Data to set.
+ */
+static inline void umc_set_drvdata(struct umc_dev *umc_dev, void *data)
+{
+	dev_set_drvdata(&umc_dev->dev, data);
+}
+
+/**
+ * umc_get_drvdata - recover UMC device's driver data.
+ * @umc_dev: Pointer to UMC device.
+ */
+static inline void *umc_get_drvdata(struct umc_dev *umc_dev)
+{
+	return dev_get_drvdata(&umc_dev->dev);
+}
+
+int umc_controller_reset(struct umc_dev *umc);
+
+#endif /* #ifndef _LINUX_UWB_UMC_H_ */
diff --git a/include/linux/uwb/whci.h b/include/linux/uwb/whci.h
new file mode 100644
index 00000000..915ec230
--- /dev/null
+++ b/include/linux/uwb/whci.h
@@ -0,0 +1,117 @@
+/*
+ * Wireless Host Controller Interface for Ultra-Wide-Band and Wireless USB
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ *
+ * References:
+ *   [WHCI] Wireless Host Controller Interface Specification for
+ *          Certified Wireless Universal Serial Bus, revision 0.95.
+ */
+#ifndef _LINUX_UWB_WHCI_H_
+#define _LINUX_UWB_WHCI_H_
+
+#include <linux/pci.h>
+
+/*
+ * UWB interface capability registers (offsets from UWBBASE)
+ *
+ * [WHCI] section 2.2
+ */
+#define UWBCAPINFO	0x00 /* == UWBCAPDATA(0) */
+#  define UWBCAPINFO_TO_N_CAPS(c)	(((c) >> 0)  & 0xFull)
+#define UWBCAPDATA(n)	(8*(n))
+#  define UWBCAPDATA_TO_VERSION(c)	(((c) >> 32) & 0xFFFFull)
+#  define UWBCAPDATA_TO_OFFSET(c)	(((c) >> 18) & 0x3FFFull)
+#  define UWBCAPDATA_TO_BAR(c)		(((c) >> 16) & 0x3ull)
+#  define UWBCAPDATA_TO_SIZE(c)		((((c) >> 8) & 0xFFull) * sizeof(u32))
+#  define UWBCAPDATA_TO_CAP_ID(c)	(((c) >> 0)  & 0xFFull)
+
+/* Size of the WHCI capability data (including the RC capability) for
+   a device with n capabilities. */
+#define UWBCAPDATA_SIZE(n) (8 + 8*(n))
+
+
+/*
+ * URC registers (offsets from URCBASE)
+ *
+ * [WHCI] section 2.3
+ */
+#define URCCMD		0x00
+#  define URCCMD_RESET		(1 << 31)  /* UMC Hardware reset */
+#  define URCCMD_RS		(1 << 30)  /* Run/Stop */
+#  define URCCMD_EARV		(1 << 29)  /* Event Address Register Valid */
+#  define URCCMD_ACTIVE		(1 << 15)  /* Command is active */
+#  define URCCMD_IWR		(1 << 14)  /* Interrupt When Ready */
+#  define URCCMD_SIZE_MASK	0x00000fff /* Command size mask */
+#define URCSTS		0x04
+#  define URCSTS_EPS		(1 << 17)  /* Event Processing Status */
+#  define URCSTS_HALTED		(1 << 16)  /* RC halted */
+#  define URCSTS_HSE		(1 << 10)  /* Host System Error...fried */
+#  define URCSTS_ER		(1 <<  9)  /* Event Ready */
+#  define URCSTS_RCI		(1 <<  8)  /* Ready for Command Interrupt */
+#  define URCSTS_INT_MASK	0x00000700 /* URC interrupt sources */
+#  define URCSTS_ISI		0x000000ff /* Interrupt Source Identification */
+#define URCINTR		0x08
+#  define URCINTR_EN_ALL	0x000007ff /* Enable all interrupt sources */
+#define URCCMDADDR	0x10
+#define URCEVTADDR	0x18
+#  define URCEVTADDR_OFFSET_MASK 0xfff    /* Event pointer offset mask */
+
+
+/** Write 32 bit @value to little endian register at @addr */
+static inline
+void le_writel(u32 value, void __iomem *addr)
+{
+	iowrite32(value, addr);
+}
+
+
+/** Read from 32 bit little endian register at @addr */
+static inline
+u32 le_readl(void __iomem *addr)
+{
+	return ioread32(addr);
+}
+
+
+/** Write 64 bit @value to little endian register at @addr */
+static inline
+void le_writeq(u64 value, void __iomem *addr)
+{
+	iowrite32(value, addr);
+	iowrite32(value >> 32, addr + 4);
+}
+
+
+/** Read from 64 bit little endian register at @addr */
+static inline
+u64 le_readq(void __iomem *addr)
+{
+	u64 value;
+	value  = ioread32(addr);
+	value |= (u64)ioread32(addr + 4) << 32;
+	return value;
+}
+
+extern int whci_wait_for(struct device *dev, u32 __iomem *reg,
+			 u32 mask, u32 result,
+			 unsigned long max_ms,  const char *tag);
+
+#endif /* #ifndef _LINUX_UWB_WHCI_H_ */
diff --git a/include/linux/v4l2-mediabus.h b/include/linux/v4l2-mediabus.h
new file mode 100644
index 00000000..5ea7f753
--- /dev/null
+++ b/include/linux/v4l2-mediabus.h
@@ -0,0 +1,114 @@
+/*
+ * Media Bus API header
+ *
+ * Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_V4L2_MEDIABUS_H
+#define __LINUX_V4L2_MEDIABUS_H
+
+#include <linux/types.h>
+#include <linux/videodev2.h>
+
+/*
+ * These pixel codes uniquely identify data formats on the media bus. Mostly
+ * they correspond to similarly named V4L2_PIX_FMT_* formats, format 0 is
+ * reserved, V4L2_MBUS_FMT_FIXED shall be used by host-client pairs, where the
+ * data format is fixed. Additionally, "2X8" means that one pixel is transferred
+ * in two 8-bit samples, "BE" or "LE" specify in which order those samples are
+ * transferred over the bus: "LE" means that the least significant bits are
+ * transferred first, "BE" means that the most significant bits are transferred
+ * first, and "PADHI" and "PADLO" define which bits - low or high, in the
+ * incomplete high byte, are filled with padding bits.
+ *
+ * The pixel codes are grouped by type, bus_width, bits per component, samples
+ * per pixel and order of subsamples. Numerical values are sorted using generic
+ * numerical sort order (8 thus comes before 10).
+ *
+ * As their value can't change when a new pixel code is inserted in the
+ * enumeration, the pixel codes are explicitly given a numerical value. The next
+ * free values for each category are listed below, update them when inserting
+ * new pixel codes.
+ */
+enum v4l2_mbus_pixelcode {
+	V4L2_MBUS_FMT_FIXED = 0x0001,
+
+	/* RGB - next is 0x1009 */
+	V4L2_MBUS_FMT_RGB444_2X8_PADHI_BE = 0x1001,
+	V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE = 0x1002,
+	V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE = 0x1003,
+	V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE = 0x1004,
+	V4L2_MBUS_FMT_BGR565_2X8_BE = 0x1005,
+	V4L2_MBUS_FMT_BGR565_2X8_LE = 0x1006,
+	V4L2_MBUS_FMT_RGB565_2X8_BE = 0x1007,
+	V4L2_MBUS_FMT_RGB565_2X8_LE = 0x1008,
+
+	/* YUV (including grey) - next is 0x2014 */
+	V4L2_MBUS_FMT_Y8_1X8 = 0x2001,
+	V4L2_MBUS_FMT_UYVY8_1_5X8 = 0x2002,
+	V4L2_MBUS_FMT_VYUY8_1_5X8 = 0x2003,
+	V4L2_MBUS_FMT_YUYV8_1_5X8 = 0x2004,
+	V4L2_MBUS_FMT_YVYU8_1_5X8 = 0x2005,
+	V4L2_MBUS_FMT_UYVY8_2X8 = 0x2006,
+	V4L2_MBUS_FMT_VYUY8_2X8 = 0x2007,
+	V4L2_MBUS_FMT_YUYV8_2X8 = 0x2008,
+	V4L2_MBUS_FMT_YVYU8_2X8 = 0x2009,
+	V4L2_MBUS_FMT_Y10_1X10 = 0x200a,
+	V4L2_MBUS_FMT_YUYV10_2X10 = 0x200b,
+	V4L2_MBUS_FMT_YVYU10_2X10 = 0x200c,
+	V4L2_MBUS_FMT_Y12_1X12 = 0x2013,
+	V4L2_MBUS_FMT_UYVY8_1X16 = 0x200f,
+	V4L2_MBUS_FMT_VYUY8_1X16 = 0x2010,
+	V4L2_MBUS_FMT_YUYV8_1X16 = 0x2011,
+	V4L2_MBUS_FMT_YVYU8_1X16 = 0x2012,
+	V4L2_MBUS_FMT_YUYV10_1X20 = 0x200d,
+	V4L2_MBUS_FMT_YVYU10_1X20 = 0x200e,
+
+	/* Bayer - next is 0x3015 */
+	V4L2_MBUS_FMT_SBGGR8_1X8 = 0x3001,
+	V4L2_MBUS_FMT_SGBRG8_1X8 = 0x3013,
+	V4L2_MBUS_FMT_SGRBG8_1X8 = 0x3002,
+	V4L2_MBUS_FMT_SRGGB8_1X8 = 0x3014,
+	V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8 = 0x300b,
+	V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8 = 0x300c,
+	V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8 = 0x3009,
+	V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8 = 0x300d,
+	V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_BE = 0x3003,
+	V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE = 0x3004,
+	V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_BE = 0x3005,
+	V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_LE = 0x3006,
+	V4L2_MBUS_FMT_SBGGR10_1X10 = 0x3007,
+	V4L2_MBUS_FMT_SGBRG10_1X10 = 0x300e,
+	V4L2_MBUS_FMT_SGRBG10_1X10 = 0x300a,
+	V4L2_MBUS_FMT_SRGGB10_1X10 = 0x300f,
+	V4L2_MBUS_FMT_SBGGR12_1X12 = 0x3008,
+	V4L2_MBUS_FMT_SGBRG12_1X12 = 0x3010,
+	V4L2_MBUS_FMT_SGRBG12_1X12 = 0x3011,
+	V4L2_MBUS_FMT_SRGGB12_1X12 = 0x3012,
+
+	/* JPEG compressed formats - next is 0x4002 */
+	V4L2_MBUS_FMT_JPEG_1X8 = 0x4001,
+};
+
+/**
+ * struct v4l2_mbus_framefmt - frame format on the media bus
+ * @width:	frame width
+ * @height:	frame height
+ * @code:	data format code (from enum v4l2_mbus_pixelcode)
+ * @field:	used interlacing type (from enum v4l2_field)
+ * @colorspace:	colorspace of the data (from enum v4l2_colorspace)
+ */
+struct v4l2_mbus_framefmt {
+	__u32			width;
+	__u32			height;
+	__u32			code;
+	__u32			field;
+	__u32			colorspace;
+	__u32			reserved[7];
+};
+
+#endif
diff --git a/include/linux/v4l2-subdev.h b/include/linux/v4l2-subdev.h
new file mode 100644
index 00000000..ed29cbbe
--- /dev/null
+++ b/include/linux/v4l2-subdev.h
@@ -0,0 +1,141 @@
+/*
+ * V4L2 subdev userspace API
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_V4L2_SUBDEV_H
+#define __LINUX_V4L2_SUBDEV_H
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+#include <linux/v4l2-mediabus.h>
+
+/**
+ * enum v4l2_subdev_format_whence - Media bus format type
+ * @V4L2_SUBDEV_FORMAT_TRY: try format, for negotiation only
+ * @V4L2_SUBDEV_FORMAT_ACTIVE: active format, applied to the device
+ */
+enum v4l2_subdev_format_whence {
+	V4L2_SUBDEV_FORMAT_TRY = 0,
+	V4L2_SUBDEV_FORMAT_ACTIVE = 1,
+};
+
+/**
+ * struct v4l2_subdev_format - Pad-level media bus format
+ * @which: format type (from enum v4l2_subdev_format_whence)
+ * @pad: pad number, as reported by the media API
+ * @format: media bus format (format code and frame size)
+ */
+struct v4l2_subdev_format {
+	__u32 which;
+	__u32 pad;
+	struct v4l2_mbus_framefmt format;
+	__u32 reserved[8];
+};
+
+/**
+ * struct v4l2_subdev_crop - Pad-level crop settings
+ * @which: format type (from enum v4l2_subdev_format_whence)
+ * @pad: pad number, as reported by the media API
+ * @rect: pad crop rectangle boundaries
+ */
+struct v4l2_subdev_crop {
+	__u32 which;
+	__u32 pad;
+	struct v4l2_rect rect;
+	__u32 reserved[8];
+};
+
+/**
+ * struct v4l2_subdev_mbus_code_enum - Media bus format enumeration
+ * @pad: pad number, as reported by the media API
+ * @index: format index during enumeration
+ * @code: format code (from enum v4l2_mbus_pixelcode)
+ */
+struct v4l2_subdev_mbus_code_enum {
+	__u32 pad;
+	__u32 index;
+	__u32 code;
+	__u32 reserved[9];
+};
+
+/**
+ * struct v4l2_subdev_frame_size_enum - Media bus format enumeration
+ * @pad: pad number, as reported by the media API
+ * @index: format index during enumeration
+ * @code: format code (from enum v4l2_mbus_pixelcode)
+ */
+struct v4l2_subdev_frame_size_enum {
+	__u32 index;
+	__u32 pad;
+	__u32 code;
+	__u32 min_width;
+	__u32 max_width;
+	__u32 min_height;
+	__u32 max_height;
+	__u32 reserved[9];
+};
+
+/**
+ * struct v4l2_subdev_frame_interval - Pad-level frame rate
+ * @pad: pad number, as reported by the media API
+ * @interval: frame interval in seconds
+ */
+struct v4l2_subdev_frame_interval {
+	__u32 pad;
+	struct v4l2_fract interval;
+	__u32 reserved[9];
+};
+
+/**
+ * struct v4l2_subdev_frame_interval_enum - Frame interval enumeration
+ * @pad: pad number, as reported by the media API
+ * @index: frame interval index during enumeration
+ * @code: format code (from enum v4l2_mbus_pixelcode)
+ * @width: frame width in pixels
+ * @height: frame height in pixels
+ * @interval: frame interval in seconds
+ */
+struct v4l2_subdev_frame_interval_enum {
+	__u32 index;
+	__u32 pad;
+	__u32 code;
+	__u32 width;
+	__u32 height;
+	struct v4l2_fract interval;
+	__u32 reserved[9];
+};
+
+#define VIDIOC_SUBDEV_G_FMT	_IOWR('V',  4, struct v4l2_subdev_format)
+#define VIDIOC_SUBDEV_S_FMT	_IOWR('V',  5, struct v4l2_subdev_format)
+#define VIDIOC_SUBDEV_G_FRAME_INTERVAL \
+			_IOWR('V', 21, struct v4l2_subdev_frame_interval)
+#define VIDIOC_SUBDEV_S_FRAME_INTERVAL \
+			_IOWR('V', 22, struct v4l2_subdev_frame_interval)
+#define VIDIOC_SUBDEV_ENUM_MBUS_CODE \
+			_IOWR('V',  2, struct v4l2_subdev_mbus_code_enum)
+#define VIDIOC_SUBDEV_ENUM_FRAME_SIZE \
+			_IOWR('V', 74, struct v4l2_subdev_frame_size_enum)
+#define VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL \
+			_IOWR('V', 75, struct v4l2_subdev_frame_interval_enum)
+#define VIDIOC_SUBDEV_G_CROP	_IOWR('V', 59, struct v4l2_subdev_crop)
+#define VIDIOC_SUBDEV_S_CROP	_IOWR('V', 60, struct v4l2_subdev_crop)
+
+#endif
diff --git a/include/linux/vermagic.h b/include/linux/vermagic.h
new file mode 100644
index 00000000..6f8fbcf1
--- /dev/null
+++ b/include/linux/vermagic.h
@@ -0,0 +1,33 @@
+#include <generated/utsrelease.h>
+
+/* Simply sanity version stamp for modules. */
+#ifdef CONFIG_SMP
+#define MODULE_VERMAGIC_SMP "SMP "
+#else
+#define MODULE_VERMAGIC_SMP ""
+#endif
+#ifdef CONFIG_PREEMPT
+#define MODULE_VERMAGIC_PREEMPT "preempt "
+#else
+#define MODULE_VERMAGIC_PREEMPT ""
+#endif
+#ifdef CONFIG_MODULE_UNLOAD
+#define MODULE_VERMAGIC_MODULE_UNLOAD "mod_unload "
+#else
+#define MODULE_VERMAGIC_MODULE_UNLOAD ""
+#endif
+#ifdef CONFIG_MODVERSIONS
+#define MODULE_VERMAGIC_MODVERSIONS "modversions "
+#else
+#define MODULE_VERMAGIC_MODVERSIONS ""
+#endif
+#ifndef MODULE_ARCH_VERMAGIC
+#define MODULE_ARCH_VERMAGIC ""
+#endif
+
+#define VERMAGIC_STRING 						\
+	UTS_RELEASE " "							\
+	MODULE_VERMAGIC_SMP MODULE_VERMAGIC_PREEMPT 			\
+	MODULE_VERMAGIC_MODULE_UNLOAD MODULE_VERMAGIC_MODVERSIONS	\
+	MODULE_ARCH_VERMAGIC
+
diff --git a/include/linux/veth.h b/include/linux/veth.h
new file mode 100644
index 00000000..3354c1eb
--- /dev/null
+++ b/include/linux/veth.h
@@ -0,0 +1,12 @@
+#ifndef __NET_VETH_H_
+#define __NET_VETH_H_
+
+enum {
+	VETH_INFO_UNSPEC,
+	VETH_INFO_PEER,
+
+	__VETH_INFO_MAX
+#define VETH_INFO_MAX	(__VETH_INFO_MAX - 1)
+};
+
+#endif
diff --git a/include/linux/vfs.h b/include/linux/vfs.h
new file mode 100644
index 00000000..e701d054
--- /dev/null
+++ b/include/linux/vfs.h
@@ -0,0 +1,6 @@
+#ifndef _LINUX_VFS_H
+#define _LINUX_VFS_H
+
+#include <linux/statfs.h>
+
+#endif
diff --git a/include/linux/vga_switcheroo.h b/include/linux/vga_switcheroo.h
new file mode 100644
index 00000000..4b9a7f59
--- /dev/null
+++ b/include/linux/vga_switcheroo.h
@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2010 Red Hat Inc.
+ * Author : Dave Airlie <airlied@redhat.com>
+ *
+ * Licensed under GPLv2
+ *
+ * vga_switcheroo.h - Support for laptop with dual GPU using one set of outputs
+ */
+
+#include <linux/fb.h>
+
+enum vga_switcheroo_state {
+	VGA_SWITCHEROO_OFF,
+	VGA_SWITCHEROO_ON,
+};
+
+enum vga_switcheroo_client_id {
+	VGA_SWITCHEROO_IGD,
+	VGA_SWITCHEROO_DIS,
+	VGA_SWITCHEROO_MAX_CLIENTS,
+};
+
+struct vga_switcheroo_handler {
+	int (*switchto)(enum vga_switcheroo_client_id id);
+	int (*power_state)(enum vga_switcheroo_client_id id,
+			   enum vga_switcheroo_state state);
+	int (*init)(void);
+	int (*get_client_id)(struct pci_dev *pdev);
+};
+
+
+#if defined(CONFIG_VGA_SWITCHEROO)
+void vga_switcheroo_unregister_client(struct pci_dev *dev);
+int vga_switcheroo_register_client(struct pci_dev *dev,
+				   void (*set_gpu_state)(struct pci_dev *dev, enum vga_switcheroo_state),
+				   void (*reprobe)(struct pci_dev *dev),
+				   bool (*can_switch)(struct pci_dev *dev));
+
+void vga_switcheroo_client_fb_set(struct pci_dev *dev,
+				  struct fb_info *info);
+
+int vga_switcheroo_register_handler(struct vga_switcheroo_handler *handler);
+void vga_switcheroo_unregister_handler(void);
+
+int vga_switcheroo_process_delayed_switch(void);
+
+#else
+
+static inline void vga_switcheroo_unregister_client(struct pci_dev *dev) {}
+static inline int vga_switcheroo_register_client(struct pci_dev *dev,
+					  void (*set_gpu_state)(struct pci_dev *dev, enum vga_switcheroo_state),
+					  void (*reprobe)(struct pci_dev *dev),
+					  bool (*can_switch)(struct pci_dev *dev)) { return 0; }
+static inline void vga_switcheroo_client_fb_set(struct pci_dev *dev, struct fb_info *info) {}
+static inline int vga_switcheroo_register_handler(struct vga_switcheroo_handler *handler) { return 0; }
+static inline void vga_switcheroo_unregister_handler(void) {}
+static inline int vga_switcheroo_process_delayed_switch(void) { return 0; }
+
+#endif
diff --git a/include/linux/vgaarb.h b/include/linux/vgaarb.h
new file mode 100644
index 00000000..b572f80b
--- /dev/null
+++ b/include/linux/vgaarb.h
@@ -0,0 +1,244 @@
+/*
+ * The VGA aribiter manages VGA space routing and VGA resource decode to
+ * allow multiple VGA devices to be used in a system in a safe way.
+ *
+ * (C) Copyright 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ * (C) Copyright 2007 Paulo R. Zanoni <przanoni@gmail.com>
+ * (C) Copyright 2007, 2009 Tiago Vignatti <vignatti@freedesktop.org>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+
+#ifndef LINUX_VGA_H
+#define LINUX_VGA_H
+
+
+/* Legacy VGA regions */
+#define VGA_RSRC_NONE	       0x00
+#define VGA_RSRC_LEGACY_IO     0x01
+#define VGA_RSRC_LEGACY_MEM    0x02
+#define VGA_RSRC_LEGACY_MASK   (VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM)
+/* Non-legacy access */
+#define VGA_RSRC_NORMAL_IO     0x04
+#define VGA_RSRC_NORMAL_MEM    0x08
+
+/* Passing that instead of a pci_dev to use the system "default"
+ * device, that is the one used by vgacon. Archs will probably
+ * have to provide their own vga_default_device();
+ */
+#define VGA_DEFAULT_DEVICE     (NULL)
+
+struct pci_dev;
+
+/* For use by clients */
+
+/**
+ *     vga_set_legacy_decoding
+ *
+ *     @pdev: pci device of the VGA card
+ *     @decodes: bit mask of what legacy regions the card decodes
+ *
+ *     Indicates to the arbiter if the card decodes legacy VGA IOs,
+ *     legacy VGA Memory, both, or none. All cards default to both,
+ *     the card driver (fbdev for example) should tell the arbiter
+ *     if it has disabled legacy decoding, so the card can be left
+ *     out of the arbitration process (and can be safe to take
+ *     interrupts at any time.
+ */
+extern void vga_set_legacy_decoding(struct pci_dev *pdev,
+				    unsigned int decodes);
+
+/**
+ *     vga_get         - acquire & locks VGA resources
+ *
+ *     @pdev: pci device of the VGA card or NULL for the system default
+ *     @rsrc: bit mask of resources to acquire and lock
+ *     @interruptible: blocking should be interruptible by signals ?
+ *
+ *     This function acquires VGA resources for the given
+ *     card and mark those resources locked. If the resource requested
+ *     are "normal" (and not legacy) resources, the arbiter will first check
+ *     wether the card is doing legacy decoding for that type of resource. If
+ *     yes, the lock is "converted" into a legacy resource lock.
+ *     The arbiter will first look for all VGA cards that might conflict
+ *     and disable their IOs and/or Memory access, including VGA forwarding
+ *     on P2P bridges if necessary, so that the requested resources can
+ *     be used. Then, the card is marked as locking these resources and
+ *     the IO and/or Memory accesse are enabled on the card (including
+ *     VGA forwarding on parent P2P bridges if any).
+ *     This function will block if some conflicting card is already locking
+ *     one of the required resources (or any resource on a different bus
+ *     segment, since P2P bridges don't differenciate VGA memory and IO
+ *     afaik). You can indicate wether this blocking should be interruptible
+ *     by a signal (for userland interface) or not.
+ *     Must not be called at interrupt time or in atomic context.
+ *     If the card already owns the resources, the function succeeds.
+ *     Nested calls are supported (a per-resource counter is maintained)
+ */
+
+#if defined(CONFIG_VGA_ARB)
+extern int vga_get(struct pci_dev *pdev, unsigned int rsrc, int interruptible);
+#else
+static inline int vga_get(struct pci_dev *pdev, unsigned int rsrc, int interruptible) { return 0; }
+#endif
+
+/**
+ *     vga_get_interruptible
+ *
+ *     Shortcut to vga_get
+ */
+
+static inline int vga_get_interruptible(struct pci_dev *pdev,
+					unsigned int rsrc)
+{
+       return vga_get(pdev, rsrc, 1);
+}
+
+/**
+ *     vga_get_uninterruptible
+ *
+ *     Shortcut to vga_get
+ */
+
+static inline int vga_get_uninterruptible(struct pci_dev *pdev,
+					  unsigned int rsrc)
+{
+       return vga_get(pdev, rsrc, 0);
+}
+
+/**
+ *     vga_tryget      - try to acquire & lock legacy VGA resources
+ *
+ *     @pdev: pci devivce of VGA card or NULL for system default
+ *     @rsrc: bit mask of resources to acquire and lock
+ *
+ *     This function performs the same operation as vga_get(), but
+ *     will return an error (-EBUSY) instead of blocking if the resources
+ *     are already locked by another card. It can be called in any context
+ */
+
+#if defined(CONFIG_VGA_ARB)
+extern int vga_tryget(struct pci_dev *pdev, unsigned int rsrc);
+#else
+static inline int vga_tryget(struct pci_dev *pdev, unsigned int rsrc) { return 0; }
+#endif
+
+/**
+ *     vga_put         - release lock on legacy VGA resources
+ *
+ *     @pdev: pci device of VGA card or NULL for system default
+ *     @rsrc: but mask of resource to release
+ *
+ *     This function releases resources previously locked by vga_get()
+ *     or vga_tryget(). The resources aren't disabled right away, so
+ *     that a subsequence vga_get() on the same card will succeed
+ *     immediately. Resources have a counter, so locks are only
+ *     released if the counter reaches 0.
+ */
+
+#if defined(CONFIG_VGA_ARB)
+extern void vga_put(struct pci_dev *pdev, unsigned int rsrc);
+#else
+#define vga_put(pdev, rsrc)
+#endif
+
+
+/**
+ *     vga_default_device
+ *
+ *     This can be defined by the platform. The default implementation
+ *     is rather dumb and will probably only work properly on single
+ *     vga card setups and/or x86 platforms.
+ *
+ *     If your VGA default device is not PCI, you'll have to return
+ *     NULL here. In this case, I assume it will not conflict with
+ *     any PCI card. If this is not true, I'll have to define two archs
+ *     hooks for enabling/disabling the VGA default device if that is
+ *     possible. This may be a problem with real _ISA_ VGA cards, in
+ *     addition to a PCI one. I don't know at this point how to deal
+ *     with that card. Can theirs IOs be disabled at all ? If not, then
+ *     I suppose it's a matter of having the proper arch hook telling
+ *     us about it, so we basically never allow anybody to succeed a
+ *     vga_get()...
+ */
+
+#ifndef __ARCH_HAS_VGA_DEFAULT_DEVICE
+extern struct pci_dev *vga_default_device(void);
+#endif
+
+/**
+ *     vga_conflicts
+ *
+ *     Architectures should define this if they have several
+ *     independent PCI domains that can afford concurrent VGA
+ *     decoding
+ */
+
+#ifndef __ARCH_HAS_VGA_CONFLICT
+static inline int vga_conflicts(struct pci_dev *p1, struct pci_dev *p2)
+{
+       return 1;
+}
+#endif
+
+/**
+ *	vga_client_register
+ *
+ *	@pdev: pci device of the VGA client
+ *	@cookie: client cookie to be used in callbacks
+ *	@irq_set_state: irq state change callback
+ *	@set_vga_decode: vga decode change callback
+ *
+ * 	return value: 0 on success, -1 on failure
+ * 	Register a client with the VGA arbitration logic
+ *
+ *	Clients have two callback mechanisms they can use.
+ *	irq enable/disable callback -
+ *		If a client can't disable its GPUs VGA resources, then we
+ *		need to be able to ask it to turn off its irqs when we
+ *		turn off its mem and io decoding.
+ *	set_vga_decode
+ *		If a client can disable its GPU VGA resource, it will
+ *		get a callback from this to set the encode/decode state
+ *
+ * Rationale: we cannot disable VGA decode resources unconditionally
+ * some single GPU laptops seem to require ACPI or BIOS access to the
+ * VGA registers to control things like backlights etc.
+ * Hopefully newer multi-GPU laptops do something saner, and desktops
+ * won't have any special ACPI for this.
+ * They driver will get a callback when VGA arbitration is first used
+ * by userspace since we some older X servers have issues.
+ */
+#if defined(CONFIG_VGA_ARB)
+int vga_client_register(struct pci_dev *pdev, void *cookie,
+			void (*irq_set_state)(void *cookie, bool state),
+			unsigned int (*set_vga_decode)(void *cookie, bool state));
+#else
+static inline int vga_client_register(struct pci_dev *pdev, void *cookie,
+				      void (*irq_set_state)(void *cookie, bool state),
+				      unsigned int (*set_vga_decode)(void *cookie, bool state))
+{
+	return 0;
+}
+#endif
+
+#endif /* LINUX_VGA_H */
diff --git a/include/linux/vhost.h b/include/linux/vhost.h
new file mode 100644
index 00000000..e847f1e3
--- /dev/null
+++ b/include/linux/vhost.h
@@ -0,0 +1,130 @@
+#ifndef _LINUX_VHOST_H
+#define _LINUX_VHOST_H
+/* Userspace interface for in-kernel virtio accelerators. */
+
+/* vhost is used to reduce the number of system calls involved in virtio.
+ *
+ * Existing virtio net code is used in the guest without modification.
+ *
+ * This header includes interface used by userspace hypervisor for
+ * device configuration.
+ */
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/ioctl.h>
+#include <linux/virtio_config.h>
+#include <linux/virtio_ring.h>
+
+struct vhost_vring_state {
+	unsigned int index;
+	unsigned int num;
+};
+
+struct vhost_vring_file {
+	unsigned int index;
+	int fd; /* Pass -1 to unbind from file. */
+
+};
+
+struct vhost_vring_addr {
+	unsigned int index;
+	/* Option flags. */
+	unsigned int flags;
+	/* Flag values: */
+	/* Whether log address is valid. If set enables logging. */
+#define VHOST_VRING_F_LOG 0
+
+	/* Start of array of descriptors (virtually contiguous) */
+	__u64 desc_user_addr;
+	/* Used structure address. Must be 32 bit aligned */
+	__u64 used_user_addr;
+	/* Available structure address. Must be 16 bit aligned */
+	__u64 avail_user_addr;
+	/* Logging support. */
+	/* Log writes to used structure, at offset calculated from specified
+	 * address. Address must be 32 bit aligned. */
+	__u64 log_guest_addr;
+};
+
+struct vhost_memory_region {
+	__u64 guest_phys_addr;
+	__u64 memory_size; /* bytes */
+	__u64 userspace_addr;
+	__u64 flags_padding; /* No flags are currently specified. */
+};
+
+/* All region addresses and sizes must be 4K aligned. */
+#define VHOST_PAGE_SIZE 0x1000
+
+struct vhost_memory {
+	__u32 nregions;
+	__u32 padding;
+	struct vhost_memory_region regions[0];
+};
+
+/* ioctls */
+
+#define VHOST_VIRTIO 0xAF
+
+/* Features bitmask for forward compatibility.  Transport bits are used for
+ * vhost specific features. */
+#define VHOST_GET_FEATURES	_IOR(VHOST_VIRTIO, 0x00, __u64)
+#define VHOST_SET_FEATURES	_IOW(VHOST_VIRTIO, 0x00, __u64)
+
+/* Set current process as the (exclusive) owner of this file descriptor.  This
+ * must be called before any other vhost command.  Further calls to
+ * VHOST_OWNER_SET fail until VHOST_OWNER_RESET is called. */
+#define VHOST_SET_OWNER _IO(VHOST_VIRTIO, 0x01)
+/* Give up ownership, and reset the device to default values.
+ * Allows subsequent call to VHOST_OWNER_SET to succeed. */
+#define VHOST_RESET_OWNER _IO(VHOST_VIRTIO, 0x02)
+
+/* Set up/modify memory layout */
+#define VHOST_SET_MEM_TABLE	_IOW(VHOST_VIRTIO, 0x03, struct vhost_memory)
+
+/* Write logging setup. */
+/* Memory writes can optionally be logged by setting bit at an offset
+ * (calculated from the physical address) from specified log base.
+ * The bit is set using an atomic 32 bit operation. */
+/* Set base address for logging. */
+#define VHOST_SET_LOG_BASE _IOW(VHOST_VIRTIO, 0x04, __u64)
+/* Specify an eventfd file descriptor to signal on log write. */
+#define VHOST_SET_LOG_FD _IOW(VHOST_VIRTIO, 0x07, int)
+
+/* Ring setup. */
+/* Set number of descriptors in ring. This parameter can not
+ * be modified while ring is running (bound to a device). */
+#define VHOST_SET_VRING_NUM _IOW(VHOST_VIRTIO, 0x10, struct vhost_vring_state)
+/* Set addresses for the ring. */
+#define VHOST_SET_VRING_ADDR _IOW(VHOST_VIRTIO, 0x11, struct vhost_vring_addr)
+/* Base value where queue looks for available descriptors */
+#define VHOST_SET_VRING_BASE _IOW(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
+/* Get accessor: reads index, writes value in num */
+#define VHOST_GET_VRING_BASE _IOWR(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
+
+/* The following ioctls use eventfd file descriptors to signal and poll
+ * for events. */
+
+/* Set eventfd to poll for added buffers */
+#define VHOST_SET_VRING_KICK _IOW(VHOST_VIRTIO, 0x20, struct vhost_vring_file)
+/* Set eventfd to signal when buffers have beed used */
+#define VHOST_SET_VRING_CALL _IOW(VHOST_VIRTIO, 0x21, struct vhost_vring_file)
+/* Set eventfd to signal an error */
+#define VHOST_SET_VRING_ERR _IOW(VHOST_VIRTIO, 0x22, struct vhost_vring_file)
+
+/* VHOST_NET specific defines */
+
+/* Attach virtio net ring to a raw socket, or tap device.
+ * The socket must be already bound to an ethernet device, this device will be
+ * used for transmit.  Pass fd -1 to unbind from the socket and the transmit
+ * device.  This can be used to stop the ring (e.g. for migration). */
+#define VHOST_NET_SET_BACKEND _IOW(VHOST_VIRTIO, 0x30, struct vhost_vring_file)
+
+/* Feature bits */
+/* Log all write descriptors. Can be changed while device is active. */
+#define VHOST_F_LOG_ALL 26
+/* vhost-net should add virtio_net_hdr for RX, and strip for TX packets. */
+#define VHOST_NET_F_VIRTIO_NET_HDR 27
+
+#endif
diff --git a/include/linux/via-core.h b/include/linux/via-core.h
new file mode 100644
index 00000000..9c21cdf3
--- /dev/null
+++ b/include/linux/via-core.h
@@ -0,0 +1,236 @@
+/*
+ * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
+ * Copyright 2009-2010 Jonathan Corbet <corbet@lwn.net>
+ * Copyright 2010 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __VIA_CORE_H__
+#define __VIA_CORE_H__
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/pci.h>
+
+/*
+ * A description of each known serial I2C/GPIO port.
+ */
+enum via_port_type {
+	VIA_PORT_NONE = 0,
+	VIA_PORT_I2C,
+	VIA_PORT_GPIO,
+};
+
+enum via_port_mode {
+	VIA_MODE_OFF = 0,
+	VIA_MODE_I2C,		/* Used as I2C port */
+	VIA_MODE_GPIO,	/* Two GPIO ports */
+};
+
+enum viafb_i2c_adap {
+	VIA_PORT_26 = 0,
+	VIA_PORT_31,
+	VIA_PORT_25,
+	VIA_PORT_2C,
+	VIA_PORT_3D,
+};
+#define VIAFB_NUM_PORTS 5
+
+struct via_port_cfg {
+	enum via_port_type	type;
+	enum via_port_mode	mode;
+	u16			io_port;
+	u8			ioport_index;
+};
+
+/*
+ * Allow subdevs to register suspend/resume hooks.
+ */
+#ifdef CONFIG_PM
+struct viafb_pm_hooks {
+	struct list_head list;
+	int (*suspend)(void *private);
+	int (*resume)(void *private);
+	void *private;
+};
+
+void viafb_pm_register(struct viafb_pm_hooks *hooks);
+void viafb_pm_unregister(struct viafb_pm_hooks *hooks);
+#endif /* CONFIG_PM */
+
+/*
+ * This is the global viafb "device" containing stuff needed by
+ * all subdevs.
+ */
+struct viafb_dev {
+	struct pci_dev *pdev;
+	int chip_type;
+	struct via_port_cfg *port_cfg;
+	/*
+	 * Spinlock for access to device registers.  Not yet
+	 * globally used.
+	 */
+	spinlock_t reg_lock;
+	/*
+	 * The framebuffer MMIO region.  Little, if anything, touches
+	 * this memory directly, and certainly nothing outside of the
+	 * framebuffer device itself.  We *do* have to be able to allocate
+	 * chunks of this memory for other devices, though.
+	 */
+	unsigned long fbmem_start;
+	long fbmem_len;
+	void __iomem *fbmem;
+#if defined(CONFIG_VIDEO_VIA_CAMERA) || defined(CONFIG_VIDEO_VIA_CAMERA_MODULE)
+	long camera_fbmem_offset;
+	long camera_fbmem_size;
+#endif
+	/*
+	 * The MMIO region for device registers.
+	 */
+	unsigned long engine_start;
+	unsigned long engine_len;
+	void __iomem *engine_mmio;
+
+};
+
+/*
+ * Interrupt management.
+ */
+
+void viafb_irq_enable(u32 mask);
+void viafb_irq_disable(u32 mask);
+
+/*
+ * The global interrupt control register and its bits.
+ */
+#define VDE_INTERRUPT	0x200	/* Video interrupt flags/masks */
+#define   VDE_I_DVISENSE  0x00000001  /* DVI sense int status */
+#define   VDE_I_VBLANK    0x00000002  /* Vertical blank status */
+#define   VDE_I_MCCFI	  0x00000004  /* MCE compl. frame int status */
+#define   VDE_I_VSYNC	  0x00000008  /* VGA VSYNC int status */
+#define   VDE_I_DMA0DDONE 0x00000010  /* DMA 0 descr done */
+#define   VDE_I_DMA0TDONE 0x00000020  /* DMA 0 transfer done */
+#define   VDE_I_DMA1DDONE 0x00000040  /* DMA 1 descr done */
+#define   VDE_I_DMA1TDONE 0x00000080  /* DMA 1 transfer done */
+#define   VDE_I_C1AV      0x00000100  /* Cap Eng 1 act vid end */
+#define   VDE_I_HQV0	  0x00000200  /* First HQV engine */
+#define   VDE_I_HQV1      0x00000400  /* Second HQV engine */
+#define   VDE_I_HQV1EN	  0x00000800  /* Second HQV engine enable */
+#define   VDE_I_C0AV      0x00001000  /* Cap Eng 0 act vid end */
+#define   VDE_I_C0VBI     0x00002000  /* Cap Eng 0 VBI end */
+#define   VDE_I_C1VBI     0x00004000  /* Cap Eng 1 VBI end */
+#define   VDE_I_VSYNC2    0x00008000  /* Sec. Disp. VSYNC */
+#define   VDE_I_DVISNSEN  0x00010000  /* DVI sense enable */
+#define   VDE_I_VSYNC2EN  0x00020000  /* Sec Disp VSYNC enable */
+#define   VDE_I_MCCFIEN	  0x00040000  /* MC comp frame int mask enable */
+#define   VDE_I_VSYNCEN   0x00080000  /* VSYNC enable */
+#define   VDE_I_DMA0DDEN  0x00100000  /* DMA 0 descr done enable */
+#define   VDE_I_DMA0TDEN  0x00200000  /* DMA 0 trans done enable */
+#define   VDE_I_DMA1DDEN  0x00400000  /* DMA 1 descr done enable */
+#define   VDE_I_DMA1TDEN  0x00800000  /* DMA 1 trans done enable */
+#define   VDE_I_C1AVEN    0x01000000  /* cap 1 act vid end enable */
+#define   VDE_I_HQV0EN	  0x02000000  /* First hqv engine enable */
+#define   VDE_I_C1VBIEN	  0x04000000  /* Cap 1 VBI end enable */
+#define   VDE_I_LVDSSI    0x08000000  /* LVDS sense interrupt */
+#define   VDE_I_C0AVEN    0x10000000  /* Cap 0 act vid end enable */
+#define   VDE_I_C0VBIEN   0x20000000  /* Cap 0 VBI end enable */
+#define   VDE_I_LVDSSIEN  0x40000000  /* LVDS Sense enable */
+#define   VDE_I_ENABLE	  0x80000000  /* Global interrupt enable */
+
+#if defined(CONFIG_VIDEO_VIA_CAMERA) || defined(CONFIG_VIDEO_VIA_CAMERA_MODULE)
+/*
+ * DMA management.
+ */
+int viafb_request_dma(void);
+void viafb_release_dma(void);
+/* void viafb_dma_copy_out(unsigned int offset, dma_addr_t paddr, int len); */
+int viafb_dma_copy_out_sg(unsigned int offset, struct scatterlist *sg, int nsg);
+
+/*
+ * DMA Controller registers.
+ */
+#define VDMA_MR0	0xe00		/* Mod reg 0 */
+#define   VDMA_MR_CHAIN   0x01		/* Chaining mode */
+#define   VDMA_MR_TDIE    0x02		/* Transfer done int enable */
+#define VDMA_CSR0	0xe04		/* Control/status */
+#define	  VDMA_C_ENABLE	  0x01		  /* DMA Enable */
+#define	  VDMA_C_START	  0x02		  /* Start a transfer */
+#define	  VDMA_C_ABORT	  0x04		  /* Abort a transfer */
+#define	  VDMA_C_DONE	  0x08		  /* Transfer is done */
+#define VDMA_MARL0	0xe20		/* Mem addr low */
+#define VDMA_MARH0	0xe24		/* Mem addr high */
+#define VDMA_DAR0	0xe28		/* Device address */
+#define VDMA_DQWCR0	0xe2c		/* Count (16-byte) */
+#define VDMA_TMR0	0xe30		/* Tile mode reg */
+#define VDMA_DPRL0	0xe34		/* Not sure */
+#define	  VDMA_DPR_IN	  0x08		/* Inbound transfer to FB */
+#define VDMA_DPRH0	0xe38
+#define VDMA_PMR0	(0xe00 + 0x134) /* Pitch mode */
+
+/*
+ * Useful stuff that probably belongs somewhere global.
+ */
+#define VGA_WIDTH	640
+#define VGA_HEIGHT	480
+#endif /* CONFIG_VIDEO_VIA_CAMERA */
+
+/*
+ * Indexed port operations.  Note that these are all multi-op
+ * functions; every invocation will be racy if you're not holding
+ * reg_lock.
+ */
+
+#define VIAStatus   0x3DA  /* Non-indexed port */
+#define VIACR       0x3D4
+#define VIASR       0x3C4
+#define VIAGR       0x3CE
+#define VIAAR       0x3C0
+
+static inline u8 via_read_reg(u16 port, u8 index)
+{
+	outb(index, port);
+	return inb(port + 1);
+}
+
+static inline void via_write_reg(u16 port, u8 index, u8 data)
+{
+	outb(index, port);
+	outb(data, port + 1);
+}
+
+static inline void via_write_reg_mask(u16 port, u8 index, u8 data, u8 mask)
+{
+	u8 old;
+
+	outb(index, port);
+	old = inb(port + 1);
+	outb((data & mask) | (old & ~mask), port + 1);
+}
+
+#define VIA_MISC_REG_READ	0x03CC
+#define VIA_MISC_REG_WRITE	0x03C2
+
+static inline void via_write_misc_reg_mask(u8 data, u8 mask)
+{
+	u8 old = inb(VIA_MISC_REG_READ);
+	outb((data & mask) | (old & ~mask), VIA_MISC_REG_WRITE);
+}
+
+
+#endif /* __VIA_CORE_H__ */
diff --git a/include/linux/via-gpio.h b/include/linux/via-gpio.h
new file mode 100644
index 00000000..8281aea3
--- /dev/null
+++ b/include/linux/via-gpio.h
@@ -0,0 +1,14 @@
+/*
+ * Support for viafb GPIO ports.
+ *
+ * Copyright 2009 Jonathan Corbet <corbet@lwn.net>
+ * Distributable under version 2 of the GNU General Public License.
+ */
+
+#ifndef __VIA_GPIO_H__
+#define __VIA_GPIO_H__
+
+extern int viafb_gpio_lookup(const char *name);
+extern int viafb_gpio_init(void);
+extern void viafb_gpio_exit(void);
+#endif
diff --git a/include/linux/via.h b/include/linux/via.h
new file mode 100644
index 00000000..86ae3bcd
--- /dev/null
+++ b/include/linux/via.h
@@ -0,0 +1,22 @@
+/* Miscellaneous definitions for VIA chipsets
+   Currently used only by drivers/parport/parport_pc.c */
+
+/* Values for SuperIO function select configuration register */
+#define VIA_FUNCTION_PARPORT_SPP     0x00
+#define VIA_FUNCTION_PARPORT_ECP     0x01
+#define VIA_FUNCTION_PARPORT_EPP     0x02
+#define VIA_FUNCTION_PARPORT_DISABLE 0x03
+#define VIA_FUNCTION_PROBE           0xFF /* Special magic value to be used in code, not to be written into chip */
+
+/* Bits for parallel port mode configuration register */
+#define VIA_PARPORT_ECPEPP 0X20
+#define VIA_PARPORT_BIDIR  0x80
+
+/* VIA configuration registers */
+#define VIA_CONFIG_INDEX 0x3F0
+#define VIA_CONFIG_DATA  0x3F1
+
+/* Mask for parallel port IRQ bits (in ISA PnP IRQ routing register 1) */
+#define VIA_IRQCONTROL_PARALLEL 0xF0
+/* Mask for parallel port DMA bits (in ISA PnP DMA routing register) */
+#define VIA_DMACONTROL_PARALLEL 0x0C
diff --git a/include/linux/via_i2c.h b/include/linux/via_i2c.h
new file mode 100644
index 00000000..44532e46
--- /dev/null
+++ b/include/linux/via_i2c.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
+
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2, or (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#ifndef __VIA_I2C_H__
+#define __VIA_I2C_H__
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+
+struct via_i2c_stuff {
+	u16 i2c_port;			/* GPIO or I2C port */
+	u16 is_active;			/* Being used as I2C? */
+	struct i2c_adapter adapter;
+	struct i2c_algo_bit_data algo;
+};
+
+
+int viafb_i2c_readbyte(u8 adap, u8 slave_addr, u8 index, u8 *pdata);
+int viafb_i2c_writebyte(u8 adap, u8 slave_addr, u8 index, u8 data);
+int viafb_i2c_readbytes(u8 adap, u8 slave_addr, u8 index, u8 *buff, int buff_len);
+struct i2c_adapter *viafb_find_i2c_adapter(enum viafb_i2c_adap which);
+
+extern int viafb_i2c_init(void);
+extern void viafb_i2c_exit(void);
+#endif /* __VIA_I2C_H__ */
diff --git a/include/linux/video_output.h b/include/linux/video_output.h
new file mode 100644
index 00000000..ed5cdeb3
--- /dev/null
+++ b/include/linux/video_output.h
@@ -0,0 +1,57 @@
+/*
+ *
+ *  Copyright (C) 2006 Luming Yu <luming.yu@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or (at
+ *  your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+#ifndef _LINUX_VIDEO_OUTPUT_H
+#define _LINUX_VIDEO_OUTPUT_H
+#include <linux/device.h>
+#include <linux/err.h>
+struct output_device;
+struct output_properties {
+	int (*set_state)(struct output_device *);
+	int (*get_status)(struct output_device *);
+};
+struct output_device {
+	int request_state;
+	struct output_properties *props;
+	struct device dev;
+};
+#define to_output_device(obj) container_of(obj, struct output_device, dev)
+#if	defined(CONFIG_VIDEO_OUTPUT_CONTROL) || defined(CONFIG_VIDEO_OUTPUT_CONTROL_MODULE)
+struct output_device *video_output_register(const char *name,
+	struct device *dev,
+	void *devdata,
+	struct output_properties *op);
+void video_output_unregister(struct output_device *dev);
+#else
+static struct output_device *video_output_register(const char *name,
+        struct device *dev,
+        void *devdata,
+        struct output_properties *op)
+{
+	return ERR_PTR(-ENODEV);
+}
+static void video_output_unregister(struct output_device *dev)
+{
+	return;
+}
+#endif
+#endif
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
new file mode 100644
index 00000000..c9c9a468
--- /dev/null
+++ b/include/linux/videodev2.h
@@ -0,0 +1,2416 @@
+/*
+ *  Video for Linux Two header file
+ *
+ *  Copyright (C) 1999-2007 the contributors
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  Alternatively you can redistribute this file under the terms of the
+ *  BSD license as stated below:
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *  1. Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *  2. Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *  3. The names of its contributors may not be used to endorse or promote
+ *     products derived from this software without specific prior written
+ *     permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ *  TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ *  PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ *  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ *  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *	Header file for v4l or V4L2 drivers and applications
+ * with public API.
+ * All kernel-specific stuff were moved to media/v4l2-dev.h, so
+ * no #if __KERNEL tests are allowed here
+ *
+ *	See http://linuxtv.org for more info
+ *
+ *	Author: Bill Dirks <bill@thedirks.org>
+ *		Justin Schoeman
+ *              Hans Verkuil <hverkuil@xs4all.nl>
+ *		et al.
+ */
+#ifndef __LINUX_VIDEODEV2_H
+#define __LINUX_VIDEODEV2_H
+
+#ifdef __KERNEL__
+#include <linux/time.h>     /* need struct timeval */
+#else
+#include <sys/time.h>
+#endif
+#include <linux/compiler.h>
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/*
+ * Common stuff for both V4L1 and V4L2
+ * Moved from videodev.h
+ */
+#define VIDEO_MAX_FRAME               32
+#define VIDEO_MAX_PLANES               8
+
+#ifndef __KERNEL__
+
+/* These defines are V4L1 specific and should not be used with the V4L2 API!
+   They will be removed from this header in the future. */
+
+#define VID_TYPE_CAPTURE	1	/* Can capture */
+#define VID_TYPE_TUNER		2	/* Can tune */
+#define VID_TYPE_TELETEXT	4	/* Does teletext */
+#define VID_TYPE_OVERLAY	8	/* Overlay onto frame buffer */
+#define VID_TYPE_CHROMAKEY	16	/* Overlay by chromakey */
+#define VID_TYPE_CLIPPING	32	/* Can clip */
+#define VID_TYPE_FRAMERAM	64	/* Uses the frame buffer memory */
+#define VID_TYPE_SCALES		128	/* Scalable */
+#define VID_TYPE_MONOCHROME	256	/* Monochrome only */
+#define VID_TYPE_SUBCAPTURE	512	/* Can capture subareas of the image */
+#define VID_TYPE_MPEG_DECODER	1024	/* Can decode MPEG streams */
+#define VID_TYPE_MPEG_ENCODER	2048	/* Can encode MPEG streams */
+#define VID_TYPE_MJPEG_DECODER	4096	/* Can decode MJPEG streams */
+#define VID_TYPE_MJPEG_ENCODER	8192	/* Can encode MJPEG streams */
+#endif
+
+/*
+ *	M I S C E L L A N E O U S
+ */
+
+/*  Four-character-code (FOURCC) */
+#define v4l2_fourcc(a, b, c, d)\
+	((__u32)(a) | ((__u32)(b) << 8) | ((__u32)(c) << 16) | ((__u32)(d) << 24))
+
+/*
+ *	E N U M S
+ */
+enum v4l2_field {
+	V4L2_FIELD_ANY           = 0, /* driver can choose from none,
+					 top, bottom, interlaced
+					 depending on whatever it thinks
+					 is approximate ... */
+	V4L2_FIELD_NONE          = 1, /* this device has no fields ... */
+	V4L2_FIELD_TOP           = 2, /* top field only */
+	V4L2_FIELD_BOTTOM        = 3, /* bottom field only */
+	V4L2_FIELD_INTERLACED    = 4, /* both fields interlaced */
+	V4L2_FIELD_SEQ_TB        = 5, /* both fields sequential into one
+					 buffer, top-bottom order */
+	V4L2_FIELD_SEQ_BT        = 6, /* same as above + bottom-top order */
+	V4L2_FIELD_ALTERNATE     = 7, /* both fields alternating into
+					 separate buffers */
+	V4L2_FIELD_INTERLACED_TB = 8, /* both fields interlaced, top field
+					 first and the top field is
+					 transmitted first */
+	V4L2_FIELD_INTERLACED_BT = 9, /* both fields interlaced, top field
+					 first and the bottom field is
+					 transmitted first */
+};
+#define V4L2_FIELD_HAS_TOP(field)	\
+	((field) == V4L2_FIELD_TOP 	||\
+	 (field) == V4L2_FIELD_INTERLACED ||\
+	 (field) == V4L2_FIELD_INTERLACED_TB ||\
+	 (field) == V4L2_FIELD_INTERLACED_BT ||\
+	 (field) == V4L2_FIELD_SEQ_TB	||\
+	 (field) == V4L2_FIELD_SEQ_BT)
+#define V4L2_FIELD_HAS_BOTTOM(field)	\
+	((field) == V4L2_FIELD_BOTTOM 	||\
+	 (field) == V4L2_FIELD_INTERLACED ||\
+	 (field) == V4L2_FIELD_INTERLACED_TB ||\
+	 (field) == V4L2_FIELD_INTERLACED_BT ||\
+	 (field) == V4L2_FIELD_SEQ_TB	||\
+	 (field) == V4L2_FIELD_SEQ_BT)
+#define V4L2_FIELD_HAS_BOTH(field)	\
+	((field) == V4L2_FIELD_INTERLACED ||\
+	 (field) == V4L2_FIELD_INTERLACED_TB ||\
+	 (field) == V4L2_FIELD_INTERLACED_BT ||\
+	 (field) == V4L2_FIELD_SEQ_TB ||\
+	 (field) == V4L2_FIELD_SEQ_BT)
+
+enum v4l2_buf_type {
+	V4L2_BUF_TYPE_VIDEO_CAPTURE        = 1,
+	V4L2_BUF_TYPE_VIDEO_OUTPUT         = 2,
+	V4L2_BUF_TYPE_VIDEO_OVERLAY        = 3,
+	V4L2_BUF_TYPE_VBI_CAPTURE          = 4,
+	V4L2_BUF_TYPE_VBI_OUTPUT           = 5,
+	V4L2_BUF_TYPE_SLICED_VBI_CAPTURE   = 6,
+	V4L2_BUF_TYPE_SLICED_VBI_OUTPUT    = 7,
+#if 1
+	/* Experimental */
+	V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY = 8,
+#endif
+	V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE = 9,
+	V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE  = 10,
+	V4L2_BUF_TYPE_PRIVATE              = 0x80,
+};
+
+#define V4L2_TYPE_IS_MULTIPLANAR(type)			\
+	((type) == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE	\
+	 || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
+
+#define V4L2_TYPE_IS_OUTPUT(type)				\
+	((type) == V4L2_BUF_TYPE_VIDEO_OUTPUT			\
+	 || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE		\
+	 || (type) == V4L2_BUF_TYPE_VIDEO_OVERLAY		\
+	 || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY	\
+	 || (type) == V4L2_BUF_TYPE_VBI_OUTPUT			\
+	 || (type) == V4L2_BUF_TYPE_SLICED_VBI_OUTPUT)
+
+enum v4l2_tuner_type {
+	V4L2_TUNER_RADIO	     = 1,
+	V4L2_TUNER_ANALOG_TV	     = 2,
+	V4L2_TUNER_DIGITAL_TV	     = 3,
+};
+
+enum v4l2_memory {
+	V4L2_MEMORY_MMAP             = 1,
+	V4L2_MEMORY_USERPTR          = 2,
+	V4L2_MEMORY_OVERLAY          = 3,
+};
+
+/* see also http://vektor.theorem.ca/graphics/ycbcr/ */
+enum v4l2_colorspace {
+	/* ITU-R 601 -- broadcast NTSC/PAL */
+	V4L2_COLORSPACE_SMPTE170M     = 1,
+
+	/* 1125-Line (US) HDTV */
+	V4L2_COLORSPACE_SMPTE240M     = 2,
+
+	/* HD and modern captures. */
+	V4L2_COLORSPACE_REC709        = 3,
+
+	/* broken BT878 extents (601, luma range 16-253 instead of 16-235) */
+	V4L2_COLORSPACE_BT878         = 4,
+
+	/* These should be useful.  Assume 601 extents. */
+	V4L2_COLORSPACE_470_SYSTEM_M  = 5,
+	V4L2_COLORSPACE_470_SYSTEM_BG = 6,
+
+	/* I know there will be cameras that send this.  So, this is
+	 * unspecified chromaticities and full 0-255 on each of the
+	 * Y'CbCr components
+	 */
+	V4L2_COLORSPACE_JPEG          = 7,
+
+	/* For RGB colourspaces, this is probably a good start. */
+	V4L2_COLORSPACE_SRGB          = 8,
+};
+
+enum v4l2_priority {
+	V4L2_PRIORITY_UNSET       = 0,  /* not initialized */
+	V4L2_PRIORITY_BACKGROUND  = 1,
+	V4L2_PRIORITY_INTERACTIVE = 2,
+	V4L2_PRIORITY_RECORD      = 3,
+	V4L2_PRIORITY_DEFAULT     = V4L2_PRIORITY_INTERACTIVE,
+};
+
+struct v4l2_rect {
+	__s32   left;
+	__s32   top;
+	__s32   width;
+	__s32   height;
+};
+
+struct v4l2_fract {
+	__u32   numerator;
+	__u32   denominator;
+};
+
+/**
+  * struct v4l2_capability - Describes V4L2 device caps returned by VIDIOC_QUERYCAP
+  *
+  * @driver:	   name of the driver module (e.g. "bttv")
+  * @card:	   name of the card (e.g. "Hauppauge WinTV")
+  * @bus_info:	   name of the bus (e.g. "PCI:" + pci_name(pci_dev) )
+  * @version:	   KERNEL_VERSION
+  * @capabilities: capabilities of the physical device as a whole
+  * @device_caps:  capabilities accessed via this particular device (node)
+  * @reserved:	   reserved fields for future extensions
+  */
+struct v4l2_capability {
+	__u8	driver[16];
+	__u8	card[32];
+	__u8	bus_info[32];
+	__u32   version;
+	__u32	capabilities;
+	__u32	device_caps;
+	__u32	reserved[3];
+};
+
+/* Values for 'capabilities' field */
+#define V4L2_CAP_VIDEO_CAPTURE		0x00000001  /* Is a video capture device */
+#define V4L2_CAP_VIDEO_OUTPUT		0x00000002  /* Is a video output device */
+#define V4L2_CAP_VIDEO_OVERLAY		0x00000004  /* Can do video overlay */
+#define V4L2_CAP_VBI_CAPTURE		0x00000010  /* Is a raw VBI capture device */
+#define V4L2_CAP_VBI_OUTPUT		0x00000020  /* Is a raw VBI output device */
+#define V4L2_CAP_SLICED_VBI_CAPTURE	0x00000040  /* Is a sliced VBI capture device */
+#define V4L2_CAP_SLICED_VBI_OUTPUT	0x00000080  /* Is a sliced VBI output device */
+#define V4L2_CAP_RDS_CAPTURE		0x00000100  /* RDS data capture */
+#define V4L2_CAP_VIDEO_OUTPUT_OVERLAY	0x00000200  /* Can do video output overlay */
+#define V4L2_CAP_HW_FREQ_SEEK		0x00000400  /* Can do hardware frequency seek  */
+#define V4L2_CAP_RDS_OUTPUT		0x00000800  /* Is an RDS encoder */
+
+/* Is a video capture device that supports multiplanar formats */
+#define V4L2_CAP_VIDEO_CAPTURE_MPLANE	0x00001000
+/* Is a video output device that supports multiplanar formats */
+#define V4L2_CAP_VIDEO_OUTPUT_MPLANE	0x00002000
+
+#define V4L2_CAP_TUNER			0x00010000  /* has a tuner */
+#define V4L2_CAP_AUDIO			0x00020000  /* has audio support */
+#define V4L2_CAP_RADIO			0x00040000  /* is a radio device */
+#define V4L2_CAP_MODULATOR		0x00080000  /* has a modulator */
+
+#define V4L2_CAP_READWRITE              0x01000000  /* read/write systemcalls */
+#define V4L2_CAP_ASYNCIO                0x02000000  /* async I/O */
+#define V4L2_CAP_STREAMING              0x04000000  /* streaming I/O ioctls */
+
+#define V4L2_CAP_DEVICE_CAPS            0x80000000  /* sets device capabilities field */
+
+/*
+ *	V I D E O   I M A G E   F O R M A T
+ */
+struct v4l2_pix_format {
+	__u32         		width;
+	__u32			height;
+	__u32			pixelformat;
+	enum v4l2_field  	field;
+	__u32            	bytesperline;	/* for padding, zero if unused */
+	__u32          		sizeimage;
+	enum v4l2_colorspace	colorspace;
+	__u32			priv;		/* private data, depends on pixelformat */
+};
+
+/*      Pixel format         FOURCC                          depth  Description  */
+
+/* RGB formats */
+#define V4L2_PIX_FMT_RGB332  v4l2_fourcc('R', 'G', 'B', '1') /*  8  RGB-3-3-2     */
+#define V4L2_PIX_FMT_RGB444  v4l2_fourcc('R', '4', '4', '4') /* 16  xxxxrrrr ggggbbbb */
+#define V4L2_PIX_FMT_RGB555  v4l2_fourcc('R', 'G', 'B', 'O') /* 16  RGB-5-5-5     */
+#define V4L2_PIX_FMT_RGB565  v4l2_fourcc('R', 'G', 'B', 'P') /* 16  RGB-5-6-5     */
+#define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R', 'G', 'B', 'Q') /* 16  RGB-5-5-5 BE  */
+#define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R', 'G', 'B', 'R') /* 16  RGB-5-6-5 BE  */
+#define V4L2_PIX_FMT_BGR666  v4l2_fourcc('B', 'G', 'R', 'H') /* 18  BGR-6-6-6	  */
+#define V4L2_PIX_FMT_BGR24   v4l2_fourcc('B', 'G', 'R', '3') /* 24  BGR-8-8-8     */
+#define V4L2_PIX_FMT_RGB24   v4l2_fourcc('R', 'G', 'B', '3') /* 24  RGB-8-8-8     */
+#define V4L2_PIX_FMT_BGR32   v4l2_fourcc('B', 'G', 'R', '4') /* 32  BGR-8-8-8-8   */
+#define V4L2_PIX_FMT_RGB32   v4l2_fourcc('R', 'G', 'B', '4') /* 32  RGB-8-8-8-8   */
+
+/* Grey formats */
+#define V4L2_PIX_FMT_GREY    v4l2_fourcc('G', 'R', 'E', 'Y') /*  8  Greyscale     */
+#define V4L2_PIX_FMT_Y4      v4l2_fourcc('Y', '0', '4', ' ') /*  4  Greyscale     */
+#define V4L2_PIX_FMT_Y6      v4l2_fourcc('Y', '0', '6', ' ') /*  6  Greyscale     */
+#define V4L2_PIX_FMT_Y10     v4l2_fourcc('Y', '1', '0', ' ') /* 10  Greyscale     */
+#define V4L2_PIX_FMT_Y12     v4l2_fourcc('Y', '1', '2', ' ') /* 12  Greyscale     */
+#define V4L2_PIX_FMT_Y16     v4l2_fourcc('Y', '1', '6', ' ') /* 16  Greyscale     */
+
+/* Grey bit-packed formats */
+#define V4L2_PIX_FMT_Y10BPACK    v4l2_fourcc('Y', '1', '0', 'B') /* 10  Greyscale bit-packed */
+
+/* Palette formats */
+#define V4L2_PIX_FMT_PAL8    v4l2_fourcc('P', 'A', 'L', '8') /*  8  8-bit palette */
+
+/* Luminance+Chrominance formats */
+#define V4L2_PIX_FMT_YVU410  v4l2_fourcc('Y', 'V', 'U', '9') /*  9  YVU 4:1:0     */
+#define V4L2_PIX_FMT_YVU420  v4l2_fourcc('Y', 'V', '1', '2') /* 12  YVU 4:2:0     */
+#define V4L2_PIX_FMT_YUYV    v4l2_fourcc('Y', 'U', 'Y', 'V') /* 16  YUV 4:2:2     */
+#define V4L2_PIX_FMT_YYUV    v4l2_fourcc('Y', 'Y', 'U', 'V') /* 16  YUV 4:2:2     */
+#define V4L2_PIX_FMT_YVYU    v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */
+#define V4L2_PIX_FMT_UYVY    v4l2_fourcc('U', 'Y', 'V', 'Y') /* 16  YUV 4:2:2     */
+#define V4L2_PIX_FMT_VYUY    v4l2_fourcc('V', 'Y', 'U', 'Y') /* 16  YUV 4:2:2     */
+#define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4', '2', '2', 'P') /* 16  YVU422 planar */
+#define V4L2_PIX_FMT_YUV411P v4l2_fourcc('4', '1', '1', 'P') /* 16  YVU411 planar */
+#define V4L2_PIX_FMT_Y41P    v4l2_fourcc('Y', '4', '1', 'P') /* 12  YUV 4:1:1     */
+#define V4L2_PIX_FMT_YUV444  v4l2_fourcc('Y', '4', '4', '4') /* 16  xxxxyyyy uuuuvvvv */
+#define V4L2_PIX_FMT_YUV555  v4l2_fourcc('Y', 'U', 'V', 'O') /* 16  YUV-5-5-5     */
+#define V4L2_PIX_FMT_YUV565  v4l2_fourcc('Y', 'U', 'V', 'P') /* 16  YUV-5-6-5     */
+#define V4L2_PIX_FMT_YUV32   v4l2_fourcc('Y', 'U', 'V', '4') /* 32  YUV-8-8-8-8   */
+#define V4L2_PIX_FMT_YUV410  v4l2_fourcc('Y', 'U', 'V', '9') /*  9  YUV 4:1:0     */
+#define V4L2_PIX_FMT_YUV420  v4l2_fourcc('Y', 'U', '1', '2') /* 12  YUV 4:2:0     */
+#define V4L2_PIX_FMT_HI240   v4l2_fourcc('H', 'I', '2', '4') /*  8  8-bit color   */
+#define V4L2_PIX_FMT_HM12    v4l2_fourcc('H', 'M', '1', '2') /*  8  YUV 4:2:0 16x16 macroblocks */
+#define V4L2_PIX_FMT_M420    v4l2_fourcc('M', '4', '2', '0') /* 12  YUV 4:2:0 2 lines y, 1 line uv interleaved */
+
+/* two planes -- one Y, one Cr + Cb interleaved  */
+#define V4L2_PIX_FMT_NV12    v4l2_fourcc('N', 'V', '1', '2') /* 12  Y/CbCr 4:2:0  */
+#define V4L2_PIX_FMT_NV21    v4l2_fourcc('N', 'V', '2', '1') /* 12  Y/CrCb 4:2:0  */
+#define V4L2_PIX_FMT_NV16    v4l2_fourcc('N', 'V', '1', '6') /* 16  Y/CbCr 4:2:2  */
+#define V4L2_PIX_FMT_NV61    v4l2_fourcc('N', 'V', '6', '1') /* 16  Y/CrCb 4:2:2  */
+#define V4L2_PIX_FMT_NV24    v4l2_fourcc('N', 'V', '2', '4') /* 24  Y/CbCr 4:4:4  */
+#define V4L2_PIX_FMT_NV42    v4l2_fourcc('N', 'V', '4', '2') /* 24  Y/CrCb 4:4:4  */
+
+/* two non contiguous planes - one Y, one Cr + Cb interleaved  */
+#define V4L2_PIX_FMT_NV12M   v4l2_fourcc('N', 'M', '1', '2') /* 12  Y/CbCr 4:2:0  */
+#define V4L2_PIX_FMT_NV12MT  v4l2_fourcc('T', 'M', '1', '2') /* 12  Y/CbCr 4:2:0 64x32 macroblocks */
+
+/* three non contiguous planes - Y, Cb, Cr */
+#define V4L2_PIX_FMT_YUV420M v4l2_fourcc('Y', 'M', '1', '2') /* 12  YUV420 planar */
+
+/* Bayer formats - see http://www.siliconimaging.com/RGB%20Bayer.htm */
+#define V4L2_PIX_FMT_SBGGR8  v4l2_fourcc('B', 'A', '8', '1') /*  8  BGBG.. GRGR.. */
+#define V4L2_PIX_FMT_SGBRG8  v4l2_fourcc('G', 'B', 'R', 'G') /*  8  GBGB.. RGRG.. */
+#define V4L2_PIX_FMT_SGRBG8  v4l2_fourcc('G', 'R', 'B', 'G') /*  8  GRGR.. BGBG.. */
+#define V4L2_PIX_FMT_SRGGB8  v4l2_fourcc('R', 'G', 'G', 'B') /*  8  RGRG.. GBGB.. */
+#define V4L2_PIX_FMT_SBGGR10 v4l2_fourcc('B', 'G', '1', '0') /* 10  BGBG.. GRGR.. */
+#define V4L2_PIX_FMT_SGBRG10 v4l2_fourcc('G', 'B', '1', '0') /* 10  GBGB.. RGRG.. */
+#define V4L2_PIX_FMT_SGRBG10 v4l2_fourcc('B', 'A', '1', '0') /* 10  GRGR.. BGBG.. */
+#define V4L2_PIX_FMT_SRGGB10 v4l2_fourcc('R', 'G', '1', '0') /* 10  RGRG.. GBGB.. */
+#define V4L2_PIX_FMT_SBGGR12 v4l2_fourcc('B', 'G', '1', '2') /* 12  BGBG.. GRGR.. */
+#define V4L2_PIX_FMT_SGBRG12 v4l2_fourcc('G', 'B', '1', '2') /* 12  GBGB.. RGRG.. */
+#define V4L2_PIX_FMT_SGRBG12 v4l2_fourcc('B', 'A', '1', '2') /* 12  GRGR.. BGBG.. */
+#define V4L2_PIX_FMT_SRGGB12 v4l2_fourcc('R', 'G', '1', '2') /* 12  RGRG.. GBGB.. */
+	/* 10bit raw bayer DPCM compressed to 8 bits */
+#define V4L2_PIX_FMT_SGRBG10DPCM8 v4l2_fourcc('B', 'D', '1', '0')
+	/*
+	 * 10bit raw bayer, expanded to 16 bits
+	 * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb...
+	 */
+#define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B', 'Y', 'R', '2') /* 16  BGBG.. GRGR.. */
+
+/* compressed formats */
+#define V4L2_PIX_FMT_MJPEG    v4l2_fourcc('M', 'J', 'P', 'G') /* Motion-JPEG   */
+#define V4L2_PIX_FMT_JPEG     v4l2_fourcc('J', 'P', 'E', 'G') /* JFIF JPEG     */
+#define V4L2_PIX_FMT_DV       v4l2_fourcc('d', 'v', 's', 'd') /* 1394          */
+#define V4L2_PIX_FMT_MPEG     v4l2_fourcc('M', 'P', 'E', 'G') /* MPEG-1/2/4 Multiplexed */
+#define V4L2_PIX_FMT_H264     v4l2_fourcc('H', '2', '6', '4') /* H264 with start codes */
+#define V4L2_PIX_FMT_H264_NO_SC v4l2_fourcc('A', 'V', 'C', '1') /* H264 without start codes */
+#define V4L2_PIX_FMT_H263     v4l2_fourcc('H', '2', '6', '3') /* H263          */
+#define V4L2_PIX_FMT_MPEG1    v4l2_fourcc('M', 'P', 'G', '1') /* MPEG-1 ES     */
+#define V4L2_PIX_FMT_MPEG2    v4l2_fourcc('M', 'P', 'G', '2') /* MPEG-2 ES     */
+#define V4L2_PIX_FMT_MPEG4    v4l2_fourcc('M', 'P', 'G', '4') /* MPEG-4 ES     */
+#define V4L2_PIX_FMT_XVID     v4l2_fourcc('X', 'V', 'I', 'D') /* Xvid           */
+#define V4L2_PIX_FMT_VC1_ANNEX_G v4l2_fourcc('V', 'C', '1', 'G') /* SMPTE 421M Annex G compliant stream */
+#define V4L2_PIX_FMT_VC1_ANNEX_L v4l2_fourcc('V', 'C', '1', 'L') /* SMPTE 421M Annex L compliant stream */
+
+/*  Vendor-specific formats   */
+#define V4L2_PIX_FMT_CPIA1    v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */
+#define V4L2_PIX_FMT_WNVA     v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */
+#define V4L2_PIX_FMT_SN9C10X  v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */
+#define V4L2_PIX_FMT_SN9C20X_I420 v4l2_fourcc('S', '9', '2', '0') /* SN9C20x YUV 4:2:0 */
+#define V4L2_PIX_FMT_PWC1     v4l2_fourcc('P', 'W', 'C', '1') /* pwc older webcam */
+#define V4L2_PIX_FMT_PWC2     v4l2_fourcc('P', 'W', 'C', '2') /* pwc newer webcam */
+#define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E', '6', '2', '5') /* ET61X251 compression */
+#define V4L2_PIX_FMT_SPCA501  v4l2_fourcc('S', '5', '0', '1') /* YUYV per line */
+#define V4L2_PIX_FMT_SPCA505  v4l2_fourcc('S', '5', '0', '5') /* YYUV per line */
+#define V4L2_PIX_FMT_SPCA508  v4l2_fourcc('S', '5', '0', '8') /* YUVY per line */
+#define V4L2_PIX_FMT_SPCA561  v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */
+#define V4L2_PIX_FMT_PAC207   v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */
+#define V4L2_PIX_FMT_MR97310A v4l2_fourcc('M', '3', '1', '0') /* compressed BGGR bayer */
+#define V4L2_PIX_FMT_JL2005BCD v4l2_fourcc('J', 'L', '2', '0') /* compressed RGGB bayer */
+#define V4L2_PIX_FMT_SN9C2028 v4l2_fourcc('S', 'O', 'N', 'X') /* compressed GBRG bayer */
+#define V4L2_PIX_FMT_SQ905C   v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */
+#define V4L2_PIX_FMT_PJPG     v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */
+#define V4L2_PIX_FMT_OV511    v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */
+#define V4L2_PIX_FMT_OV518    v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */
+#define V4L2_PIX_FMT_STV0680  v4l2_fourcc('S', '6', '8', '0') /* stv0680 bayer */
+#define V4L2_PIX_FMT_TM6000   v4l2_fourcc('T', 'M', '6', '0') /* tm5600/tm60x0 */
+#define V4L2_PIX_FMT_CIT_YYVYUY v4l2_fourcc('C', 'I', 'T', 'V') /* one line of Y then 1 line of VYUY */
+#define V4L2_PIX_FMT_KONICA420  v4l2_fourcc('K', 'O', 'N', 'I') /* YUV420 planar in blocks of 256 pixels */
+#define V4L2_PIX_FMT_JPGL	v4l2_fourcc('J', 'P', 'G', 'L') /* JPEG-Lite */
+#define V4L2_PIX_FMT_SE401      v4l2_fourcc('S', '4', '0', '1') /* se401 janggu compressed rgb */
+
+/*
+ *	F O R M A T   E N U M E R A T I O N
+ */
+struct v4l2_fmtdesc {
+	__u32		    index;             /* Format number      */
+	enum v4l2_buf_type  type;              /* buffer type        */
+	__u32               flags;
+	__u8		    description[32];   /* Description string */
+	__u32		    pixelformat;       /* Format fourcc      */
+	__u32		    reserved[4];
+};
+
+#define V4L2_FMT_FLAG_COMPRESSED 0x0001
+#define V4L2_FMT_FLAG_EMULATED   0x0002
+
+#if 1
+	/* Experimental Frame Size and frame rate enumeration */
+/*
+ *	F R A M E   S I Z E   E N U M E R A T I O N
+ */
+enum v4l2_frmsizetypes {
+	V4L2_FRMSIZE_TYPE_DISCRETE	= 1,
+	V4L2_FRMSIZE_TYPE_CONTINUOUS	= 2,
+	V4L2_FRMSIZE_TYPE_STEPWISE	= 3,
+};
+
+struct v4l2_frmsize_discrete {
+	__u32			width;		/* Frame width [pixel] */
+	__u32			height;		/* Frame height [pixel] */
+};
+
+struct v4l2_frmsize_stepwise {
+	__u32			min_width;	/* Minimum frame width [pixel] */
+	__u32			max_width;	/* Maximum frame width [pixel] */
+	__u32			step_width;	/* Frame width step size [pixel] */
+	__u32			min_height;	/* Minimum frame height [pixel] */
+	__u32			max_height;	/* Maximum frame height [pixel] */
+	__u32			step_height;	/* Frame height step size [pixel] */
+};
+
+struct v4l2_frmsizeenum {
+	__u32			index;		/* Frame size number */
+	__u32			pixel_format;	/* Pixel format */
+	__u32			type;		/* Frame size type the device supports. */
+
+	union {					/* Frame size */
+		struct v4l2_frmsize_discrete	discrete;
+		struct v4l2_frmsize_stepwise	stepwise;
+	};
+
+	__u32   reserved[2];			/* Reserved space for future use */
+};
+
+/*
+ *	F R A M E   R A T E   E N U M E R A T I O N
+ */
+enum v4l2_frmivaltypes {
+	V4L2_FRMIVAL_TYPE_DISCRETE	= 1,
+	V4L2_FRMIVAL_TYPE_CONTINUOUS	= 2,
+	V4L2_FRMIVAL_TYPE_STEPWISE	= 3,
+};
+
+struct v4l2_frmival_stepwise {
+	struct v4l2_fract	min;		/* Minimum frame interval [s] */
+	struct v4l2_fract	max;		/* Maximum frame interval [s] */
+	struct v4l2_fract	step;		/* Frame interval step size [s] */
+};
+
+struct v4l2_frmivalenum {
+	__u32			index;		/* Frame format index */
+	__u32			pixel_format;	/* Pixel format */
+	__u32			width;		/* Frame width */
+	__u32			height;		/* Frame height */
+	__u32			type;		/* Frame interval type the device supports. */
+
+	union {					/* Frame interval */
+		struct v4l2_fract		discrete;
+		struct v4l2_frmival_stepwise	stepwise;
+	};
+
+	__u32	reserved[2];			/* Reserved space for future use */
+};
+#endif
+
+/*
+ *	T I M E C O D E
+ */
+struct v4l2_timecode {
+	__u32	type;
+	__u32	flags;
+	__u8	frames;
+	__u8	seconds;
+	__u8	minutes;
+	__u8	hours;
+	__u8	userbits[4];
+};
+
+/*  Type  */
+#define V4L2_TC_TYPE_24FPS		1
+#define V4L2_TC_TYPE_25FPS		2
+#define V4L2_TC_TYPE_30FPS		3
+#define V4L2_TC_TYPE_50FPS		4
+#define V4L2_TC_TYPE_60FPS		5
+
+/*  Flags  */
+#define V4L2_TC_FLAG_DROPFRAME		0x0001 /* "drop-frame" mode */
+#define V4L2_TC_FLAG_COLORFRAME		0x0002
+#define V4L2_TC_USERBITS_field		0x000C
+#define V4L2_TC_USERBITS_USERDEFINED	0x0000
+#define V4L2_TC_USERBITS_8BITCHARS	0x0008
+/* The above is based on SMPTE timecodes */
+
+struct v4l2_jpegcompression {
+	int quality;
+
+	int  APPn;              /* Number of APP segment to be written,
+				 * must be 0..15 */
+	int  APP_len;           /* Length of data in JPEG APPn segment */
+	char APP_data[60];      /* Data in the JPEG APPn segment. */
+
+	int  COM_len;           /* Length of data in JPEG COM segment */
+	char COM_data[60];      /* Data in JPEG COM segment */
+
+	__u32 jpeg_markers;     /* Which markers should go into the JPEG
+				 * output. Unless you exactly know what
+				 * you do, leave them untouched.
+				 * Inluding less markers will make the
+				 * resulting code smaller, but there will
+				 * be fewer applications which can read it.
+				 * The presence of the APP and COM marker
+				 * is influenced by APP_len and COM_len
+				 * ONLY, not by this property! */
+
+#define V4L2_JPEG_MARKER_DHT (1<<3)    /* Define Huffman Tables */
+#define V4L2_JPEG_MARKER_DQT (1<<4)    /* Define Quantization Tables */
+#define V4L2_JPEG_MARKER_DRI (1<<5)    /* Define Restart Interval */
+#define V4L2_JPEG_MARKER_COM (1<<6)    /* Comment segment */
+#define V4L2_JPEG_MARKER_APP (1<<7)    /* App segment, driver will
+					* allways use APP0 */
+};
+
+/*
+ *	M E M O R Y - M A P P I N G   B U F F E R S
+ */
+struct v4l2_requestbuffers {
+	__u32			count;
+	enum v4l2_buf_type      type;
+	enum v4l2_memory        memory;
+	__u32			reserved[2];
+};
+
+/**
+ * struct v4l2_plane - plane info for multi-planar buffers
+ * @bytesused:		number of bytes occupied by data in the plane (payload)
+ * @length:		size of this plane (NOT the payload) in bytes
+ * @mem_offset:		when memory in the associated struct v4l2_buffer is
+ *			V4L2_MEMORY_MMAP, equals the offset from the start of
+ *			the device memory for this plane (or is a "cookie" that
+ *			should be passed to mmap() called on the video node)
+ * @userptr:		when memory is V4L2_MEMORY_USERPTR, a userspace pointer
+ *			pointing to this plane
+ * @data_offset:	offset in the plane to the start of data; usually 0,
+ *			unless there is a header in front of the data
+ *
+ * Multi-planar buffers consist of one or more planes, e.g. an YCbCr buffer
+ * with two planes can have one plane for Y, and another for interleaved CbCr
+ * components. Each plane can reside in a separate memory buffer, or even in
+ * a completely separate memory node (e.g. in embedded devices).
+ */
+struct v4l2_plane {
+	__u32			bytesused;
+	__u32			length;
+	union {
+		__u32		mem_offset;
+		unsigned long	userptr;
+	} m;
+	__u32			data_offset;
+	__u32			reserved[11];
+};
+
+/**
+ * struct v4l2_buffer - video buffer info
+ * @index:	id number of the buffer
+ * @type:	buffer type (type == *_MPLANE for multiplanar buffers)
+ * @bytesused:	number of bytes occupied by data in the buffer (payload);
+ *		unused (set to 0) for multiplanar buffers
+ * @flags:	buffer informational flags
+ * @field:	field order of the image in the buffer
+ * @timestamp:	frame timestamp
+ * @timecode:	frame timecode
+ * @sequence:	sequence count of this frame
+ * @memory:	the method, in which the actual video data is passed
+ * @offset:	for non-multiplanar buffers with memory == V4L2_MEMORY_MMAP;
+ *		offset from the start of the device memory for this plane,
+ *		(or a "cookie" that should be passed to mmap() as offset)
+ * @userptr:	for non-multiplanar buffers with memory == V4L2_MEMORY_USERPTR;
+ *		a userspace pointer pointing to this buffer
+ * @planes:	for multiplanar buffers; userspace pointer to the array of plane
+ *		info structs for this buffer
+ * @length:	size in bytes of the buffer (NOT its payload) for single-plane
+ *		buffers (when type != *_MPLANE); number of elements in the
+ *		planes array for multi-plane buffers
+ * @input:	input number from which the video data has has been captured
+ *
+ * Contains data exchanged by application and driver using one of the Streaming
+ * I/O methods.
+ */
+struct v4l2_buffer {
+	__u32			index;
+	enum v4l2_buf_type      type;
+	__u32			bytesused;
+	__u32			flags;
+	enum v4l2_field		field;
+	struct timeval		timestamp;
+	struct v4l2_timecode	timecode;
+	__u32			sequence;
+
+	/* memory location */
+	enum v4l2_memory        memory;
+	union {
+		__u32           offset;
+		unsigned long   userptr;
+		struct v4l2_plane *planes;
+	} m;
+	__u32			length;
+	__u32			input;
+	__u32			reserved;
+};
+
+/*  Flags for 'flags' field */
+#define V4L2_BUF_FLAG_MAPPED	0x0001  /* Buffer is mapped (flag) */
+#define V4L2_BUF_FLAG_QUEUED	0x0002	/* Buffer is queued for processing */
+#define V4L2_BUF_FLAG_DONE	0x0004	/* Buffer is ready */
+#define V4L2_BUF_FLAG_KEYFRAME	0x0008	/* Image is a keyframe (I-frame) */
+#define V4L2_BUF_FLAG_PFRAME	0x0010	/* Image is a P-frame */
+#define V4L2_BUF_FLAG_BFRAME	0x0020	/* Image is a B-frame */
+/* Buffer is ready, but the data contained within is corrupted. */
+#define V4L2_BUF_FLAG_ERROR	0x0040
+#define V4L2_BUF_FLAG_TIMECODE	0x0100	/* timecode field is valid */
+#define V4L2_BUF_FLAG_INPUT     0x0200  /* input field is valid */
+#define V4L2_BUF_FLAG_PREPARED	0x0400	/* Buffer is prepared for queuing */
+/* Cache handling flags */
+#define V4L2_BUF_FLAG_NO_CACHE_INVALIDATE	0x0800
+#define V4L2_BUF_FLAG_NO_CACHE_CLEAN		0x1000
+
+/*
+ *	O V E R L A Y   P R E V I E W
+ */
+struct v4l2_framebuffer {
+	__u32			capability;
+	__u32			flags;
+/* FIXME: in theory we should pass something like PCI device + memory
+ * region + offset instead of some physical address */
+	void                    *base;
+	struct v4l2_pix_format	fmt;
+};
+/*  Flags for the 'capability' field. Read only */
+#define V4L2_FBUF_CAP_EXTERNOVERLAY	0x0001
+#define V4L2_FBUF_CAP_CHROMAKEY		0x0002
+#define V4L2_FBUF_CAP_LIST_CLIPPING     0x0004
+#define V4L2_FBUF_CAP_BITMAP_CLIPPING	0x0008
+#define V4L2_FBUF_CAP_LOCAL_ALPHA	0x0010
+#define V4L2_FBUF_CAP_GLOBAL_ALPHA	0x0020
+#define V4L2_FBUF_CAP_LOCAL_INV_ALPHA	0x0040
+#define V4L2_FBUF_CAP_SRC_CHROMAKEY	0x0080
+/*  Flags for the 'flags' field. */
+#define V4L2_FBUF_FLAG_PRIMARY		0x0001
+#define V4L2_FBUF_FLAG_OVERLAY		0x0002
+#define V4L2_FBUF_FLAG_CHROMAKEY	0x0004
+#define V4L2_FBUF_FLAG_LOCAL_ALPHA	0x0008
+#define V4L2_FBUF_FLAG_GLOBAL_ALPHA	0x0010
+#define V4L2_FBUF_FLAG_LOCAL_INV_ALPHA	0x0020
+#define V4L2_FBUF_FLAG_SRC_CHROMAKEY	0x0040
+
+struct v4l2_clip {
+	struct v4l2_rect        c;
+	struct v4l2_clip	__user *next;
+};
+
+struct v4l2_window {
+	struct v4l2_rect        w;
+	enum v4l2_field  	field;
+	__u32			chromakey;
+	struct v4l2_clip	__user *clips;
+	__u32			clipcount;
+	void			__user *bitmap;
+	__u8                    global_alpha;
+};
+
+/*
+ *	C A P T U R E   P A R A M E T E R S
+ */
+struct v4l2_captureparm {
+	__u32		   capability;	  /*  Supported modes */
+	__u32		   capturemode;	  /*  Current mode */
+	struct v4l2_fract  timeperframe;  /*  Time per frame in .1us units */
+	__u32		   extendedmode;  /*  Driver-specific extensions */
+	__u32              readbuffers;   /*  # of buffers for read */
+	__u32		   reserved[4];
+};
+
+/*  Flags for 'capability' and 'capturemode' fields */
+#define V4L2_MODE_HIGHQUALITY	0x0001	/*  High quality imaging mode */
+#define V4L2_CAP_TIMEPERFRAME	0x1000	/*  timeperframe field is supported */
+
+struct v4l2_outputparm {
+	__u32		   capability;	 /*  Supported modes */
+	__u32		   outputmode;	 /*  Current mode */
+	struct v4l2_fract  timeperframe; /*  Time per frame in seconds */
+	__u32		   extendedmode; /*  Driver-specific extensions */
+	__u32              writebuffers; /*  # of buffers for write */
+	__u32		   reserved[4];
+};
+
+/*
+ *	I N P U T   I M A G E   C R O P P I N G
+ */
+struct v4l2_cropcap {
+	enum v4l2_buf_type      type;
+	struct v4l2_rect        bounds;
+	struct v4l2_rect        defrect;
+	struct v4l2_fract       pixelaspect;
+};
+
+struct v4l2_crop {
+	enum v4l2_buf_type      type;
+	struct v4l2_rect        c;
+};
+
+/* Hints for adjustments of selection rectangle */
+#define V4L2_SEL_FLAG_GE	0x00000001
+#define V4L2_SEL_FLAG_LE	0x00000002
+
+/* Selection targets */
+
+/* Current cropping area */
+#define V4L2_SEL_TGT_CROP_ACTIVE	0x0000
+/* Default cropping area */
+#define V4L2_SEL_TGT_CROP_DEFAULT	0x0001
+/* Cropping bounds */
+#define V4L2_SEL_TGT_CROP_BOUNDS	0x0002
+/* Current composing area */
+#define V4L2_SEL_TGT_COMPOSE_ACTIVE	0x0100
+/* Default composing area */
+#define V4L2_SEL_TGT_COMPOSE_DEFAULT	0x0101
+/* Composing bounds */
+#define V4L2_SEL_TGT_COMPOSE_BOUNDS	0x0102
+/* Current composing area plus all padding pixels */
+#define V4L2_SEL_TGT_COMPOSE_PADDED	0x0103
+
+/**
+ * struct v4l2_selection - selection info
+ * @type:	buffer type (do not use *_MPLANE types)
+ * @target:	selection target, used to choose one of possible rectangles
+ * @flags:	constraints flags
+ * @r:		coordinates of selection window
+ * @reserved:	for future use, rounds structure size to 64 bytes, set to zero
+ *
+ * Hardware may use multiple helper windows to process a video stream.
+ * The structure is used to exchange this selection areas between
+ * an application and a driver.
+ */
+struct v4l2_selection {
+	__u32			type;
+	__u32			target;
+	__u32                   flags;
+	struct v4l2_rect        r;
+	__u32                   reserved[9];
+};
+
+
+/*
+ *      A N A L O G   V I D E O   S T A N D A R D
+ */
+
+typedef __u64 v4l2_std_id;
+
+/* one bit for each */
+#define V4L2_STD_PAL_B          ((v4l2_std_id)0x00000001)
+#define V4L2_STD_PAL_B1         ((v4l2_std_id)0x00000002)
+#define V4L2_STD_PAL_G          ((v4l2_std_id)0x00000004)
+#define V4L2_STD_PAL_H          ((v4l2_std_id)0x00000008)
+#define V4L2_STD_PAL_I          ((v4l2_std_id)0x00000010)
+#define V4L2_STD_PAL_D          ((v4l2_std_id)0x00000020)
+#define V4L2_STD_PAL_D1         ((v4l2_std_id)0x00000040)
+#define V4L2_STD_PAL_K          ((v4l2_std_id)0x00000080)
+
+#define V4L2_STD_PAL_M          ((v4l2_std_id)0x00000100)
+#define V4L2_STD_PAL_N          ((v4l2_std_id)0x00000200)
+#define V4L2_STD_PAL_Nc         ((v4l2_std_id)0x00000400)
+#define V4L2_STD_PAL_60         ((v4l2_std_id)0x00000800)
+
+#define V4L2_STD_NTSC_M         ((v4l2_std_id)0x00001000)	/* BTSC */
+#define V4L2_STD_NTSC_M_JP      ((v4l2_std_id)0x00002000)	/* EIA-J */
+#define V4L2_STD_NTSC_443       ((v4l2_std_id)0x00004000)
+#define V4L2_STD_NTSC_M_KR      ((v4l2_std_id)0x00008000)	/* FM A2 */
+
+#define V4L2_STD_SECAM_B        ((v4l2_std_id)0x00010000)
+#define V4L2_STD_SECAM_D        ((v4l2_std_id)0x00020000)
+#define V4L2_STD_SECAM_G        ((v4l2_std_id)0x00040000)
+#define V4L2_STD_SECAM_H        ((v4l2_std_id)0x00080000)
+#define V4L2_STD_SECAM_K        ((v4l2_std_id)0x00100000)
+#define V4L2_STD_SECAM_K1       ((v4l2_std_id)0x00200000)
+#define V4L2_STD_SECAM_L        ((v4l2_std_id)0x00400000)
+#define V4L2_STD_SECAM_LC       ((v4l2_std_id)0x00800000)
+
+/* ATSC/HDTV */
+#define V4L2_STD_ATSC_8_VSB     ((v4l2_std_id)0x01000000)
+#define V4L2_STD_ATSC_16_VSB    ((v4l2_std_id)0x02000000)
+
+/* FIXME:
+   Although std_id is 64 bits, there is an issue on PPC32 architecture that
+   makes switch(__u64) to break. So, there's a hack on v4l2-common.c rounding
+   this value to 32 bits.
+   As, currently, the max value is for V4L2_STD_ATSC_16_VSB (30 bits wide),
+   it should work fine. However, if needed to add more than two standards,
+   v4l2-common.c should be fixed.
+ */
+
+/*
+ * Some macros to merge video standards in order to make live easier for the
+ * drivers and V4L2 applications
+ */
+
+/*
+ * "Common" NTSC/M - It should be noticed that V4L2_STD_NTSC_443 is
+ * Missing here.
+ */
+#define V4L2_STD_NTSC           (V4L2_STD_NTSC_M	|\
+				 V4L2_STD_NTSC_M_JP     |\
+				 V4L2_STD_NTSC_M_KR)
+/* Secam macros */
+#define V4L2_STD_SECAM_DK      	(V4L2_STD_SECAM_D	|\
+				 V4L2_STD_SECAM_K	|\
+				 V4L2_STD_SECAM_K1)
+/* All Secam Standards */
+#define V4L2_STD_SECAM		(V4L2_STD_SECAM_B	|\
+				 V4L2_STD_SECAM_G	|\
+				 V4L2_STD_SECAM_H	|\
+				 V4L2_STD_SECAM_DK	|\
+				 V4L2_STD_SECAM_L       |\
+				 V4L2_STD_SECAM_LC)
+/* PAL macros */
+#define V4L2_STD_PAL_BG		(V4L2_STD_PAL_B		|\
+				 V4L2_STD_PAL_B1	|\
+				 V4L2_STD_PAL_G)
+#define V4L2_STD_PAL_DK		(V4L2_STD_PAL_D		|\
+				 V4L2_STD_PAL_D1	|\
+				 V4L2_STD_PAL_K)
+/*
+ * "Common" PAL - This macro is there to be compatible with the old
+ * V4L1 concept of "PAL": /BGDKHI.
+ * Several PAL standards are mising here: /M, /N and /Nc
+ */
+#define V4L2_STD_PAL		(V4L2_STD_PAL_BG	|\
+				 V4L2_STD_PAL_DK	|\
+				 V4L2_STD_PAL_H		|\
+				 V4L2_STD_PAL_I)
+/* Chroma "agnostic" standards */
+#define V4L2_STD_B		(V4L2_STD_PAL_B		|\
+				 V4L2_STD_PAL_B1	|\
+				 V4L2_STD_SECAM_B)
+#define V4L2_STD_G		(V4L2_STD_PAL_G		|\
+				 V4L2_STD_SECAM_G)
+#define V4L2_STD_H		(V4L2_STD_PAL_H		|\
+				 V4L2_STD_SECAM_H)
+#define V4L2_STD_L		(V4L2_STD_SECAM_L	|\
+				 V4L2_STD_SECAM_LC)
+#define V4L2_STD_GH		(V4L2_STD_G		|\
+				 V4L2_STD_H)
+#define V4L2_STD_DK		(V4L2_STD_PAL_DK	|\
+				 V4L2_STD_SECAM_DK)
+#define V4L2_STD_BG		(V4L2_STD_B		|\
+				 V4L2_STD_G)
+#define V4L2_STD_MN		(V4L2_STD_PAL_M		|\
+				 V4L2_STD_PAL_N		|\
+				 V4L2_STD_PAL_Nc	|\
+				 V4L2_STD_NTSC)
+
+/* Standards where MTS/BTSC stereo could be found */
+#define V4L2_STD_MTS		(V4L2_STD_NTSC_M	|\
+				 V4L2_STD_PAL_M		|\
+				 V4L2_STD_PAL_N		|\
+				 V4L2_STD_PAL_Nc)
+
+/* Standards for Countries with 60Hz Line frequency */
+#define V4L2_STD_525_60		(V4L2_STD_PAL_M		|\
+				 V4L2_STD_PAL_60	|\
+				 V4L2_STD_NTSC		|\
+				 V4L2_STD_NTSC_443)
+/* Standards for Countries with 50Hz Line frequency */
+#define V4L2_STD_625_50		(V4L2_STD_PAL		|\
+				 V4L2_STD_PAL_N		|\
+				 V4L2_STD_PAL_Nc	|\
+				 V4L2_STD_SECAM)
+
+#define V4L2_STD_ATSC           (V4L2_STD_ATSC_8_VSB    |\
+				 V4L2_STD_ATSC_16_VSB)
+/* Macros with none and all analog standards */
+#define V4L2_STD_UNKNOWN        0
+#define V4L2_STD_ALL            (V4L2_STD_525_60	|\
+				 V4L2_STD_625_50)
+
+struct v4l2_standard {
+	__u32		     index;
+	v4l2_std_id          id;
+	__u8		     name[24];
+	struct v4l2_fract    frameperiod; /* Frames, not fields */
+	__u32		     framelines;
+	__u32		     reserved[4];
+};
+
+/*
+ *	V I D E O	T I M I N G S	D V	P R E S E T
+ */
+struct v4l2_dv_preset {
+	__u32	preset;
+	__u32	reserved[4];
+};
+
+/*
+ *	D V	P R E S E T S	E N U M E R A T I O N
+ */
+struct v4l2_dv_enum_preset {
+	__u32	index;
+	__u32	preset;
+	__u8	name[32]; /* Name of the preset timing */
+	__u32	width;
+	__u32	height;
+	__u32	reserved[4];
+};
+
+/*
+ * 	D V	P R E S E T	V A L U E S
+ */
+#define		V4L2_DV_INVALID		0
+#define		V4L2_DV_480P59_94	1 /* BT.1362 */
+#define		V4L2_DV_576P50		2 /* BT.1362 */
+#define		V4L2_DV_720P24		3 /* SMPTE 296M */
+#define		V4L2_DV_720P25		4 /* SMPTE 296M */
+#define		V4L2_DV_720P30		5 /* SMPTE 296M */
+#define		V4L2_DV_720P50		6 /* SMPTE 296M */
+#define		V4L2_DV_720P59_94	7 /* SMPTE 274M */
+#define		V4L2_DV_720P60		8 /* SMPTE 274M/296M */
+#define		V4L2_DV_1080I29_97	9 /* BT.1120/ SMPTE 274M */
+#define		V4L2_DV_1080I30		10 /* BT.1120/ SMPTE 274M */
+#define		V4L2_DV_1080I25		11 /* BT.1120 */
+#define		V4L2_DV_1080I50		12 /* SMPTE 296M */
+#define		V4L2_DV_1080I60		13 /* SMPTE 296M */
+#define		V4L2_DV_1080P24		14 /* SMPTE 296M */
+#define		V4L2_DV_1080P25		15 /* SMPTE 296M */
+#define		V4L2_DV_1080P30		16 /* SMPTE 296M */
+#define		V4L2_DV_1080P50		17 /* BT.1120 */
+#define		V4L2_DV_1080P60		18 /* BT.1120 */
+
+/*
+ *	D V 	B T	T I M I N G S
+ */
+
+/* BT.656/BT.1120 timing data */
+struct v4l2_bt_timings {
+	__u32	width;		/* width in pixels */
+	__u32	height;		/* height in lines */
+	__u32	interlaced;	/* Interlaced or progressive */
+	__u32	polarities;	/* Positive or negative polarity */
+	__u64	pixelclock;	/* Pixel clock in HZ. Ex. 74.25MHz->74250000 */
+	__u32	hfrontporch;	/* Horizpontal front porch in pixels */
+	__u32	hsync;		/* Horizontal Sync length in pixels */
+	__u32	hbackporch;	/* Horizontal back porch in pixels */
+	__u32	vfrontporch;	/* Vertical front porch in pixels */
+	__u32	vsync;		/* Vertical Sync length in lines */
+	__u32	vbackporch;	/* Vertical back porch in lines */
+	__u32	il_vfrontporch;	/* Vertical front porch for bottom field of
+				 * interlaced field formats
+				 */
+	__u32	il_vsync;	/* Vertical sync length for bottom field of
+				 * interlaced field formats
+				 */
+	__u32	il_vbackporch;	/* Vertical back porch for bottom field of
+				 * interlaced field formats
+				 */
+	__u32	reserved[16];
+} __attribute__ ((packed));
+
+/* Interlaced or progressive format */
+#define	V4L2_DV_PROGRESSIVE	0
+#define	V4L2_DV_INTERLACED	1
+
+/* Polarities. If bit is not set, it is assumed to be negative polarity */
+#define V4L2_DV_VSYNC_POS_POL	0x00000001
+#define V4L2_DV_HSYNC_POS_POL	0x00000002
+
+
+/* DV timings */
+struct v4l2_dv_timings {
+	__u32 type;
+	union {
+		struct v4l2_bt_timings	bt;
+		__u32	reserved[32];
+	};
+} __attribute__ ((packed));
+
+/* Values for the type field */
+#define V4L2_DV_BT_656_1120	0	/* BT.656/1120 timing type */
+
+/*
+ *	V I D E O   I N P U T S
+ */
+struct v4l2_input {
+	__u32	     index;		/*  Which input */
+	__u8	     name[32];		/*  Label */
+	__u32	     type;		/*  Type of input */
+	__u32	     audioset;		/*  Associated audios (bitfield) */
+	__u32        tuner;             /*  Associated tuner */
+	v4l2_std_id  std;
+	__u32	     status;
+	__u32	     capabilities;
+	__u32	     reserved[3];
+};
+
+/*  Values for the 'type' field */
+#define V4L2_INPUT_TYPE_TUNER		1
+#define V4L2_INPUT_TYPE_CAMERA		2
+
+/* field 'status' - general */
+#define V4L2_IN_ST_NO_POWER    0x00000001  /* Attached device is off */
+#define V4L2_IN_ST_NO_SIGNAL   0x00000002
+#define V4L2_IN_ST_NO_COLOR    0x00000004
+
+/* field 'status' - sensor orientation */
+/* If sensor is mounted upside down set both bits */
+#define V4L2_IN_ST_HFLIP       0x00000010 /* Frames are flipped horizontally */
+#define V4L2_IN_ST_VFLIP       0x00000020 /* Frames are flipped vertically */
+
+/* field 'status' - analog */
+#define V4L2_IN_ST_NO_H_LOCK   0x00000100  /* No horizontal sync lock */
+#define V4L2_IN_ST_COLOR_KILL  0x00000200  /* Color killer is active */
+
+/* field 'status' - digital */
+#define V4L2_IN_ST_NO_SYNC     0x00010000  /* No synchronization lock */
+#define V4L2_IN_ST_NO_EQU      0x00020000  /* No equalizer lock */
+#define V4L2_IN_ST_NO_CARRIER  0x00040000  /* Carrier recovery failed */
+
+/* field 'status' - VCR and set-top box */
+#define V4L2_IN_ST_MACROVISION 0x01000000  /* Macrovision detected */
+#define V4L2_IN_ST_NO_ACCESS   0x02000000  /* Conditional access denied */
+#define V4L2_IN_ST_VTR         0x04000000  /* VTR time constant */
+
+/* capabilities flags */
+#define V4L2_IN_CAP_PRESETS		0x00000001 /* Supports S_DV_PRESET */
+#define V4L2_IN_CAP_CUSTOM_TIMINGS	0x00000002 /* Supports S_DV_TIMINGS */
+#define V4L2_IN_CAP_STD			0x00000004 /* Supports S_STD */
+
+/*
+ *	V I D E O   O U T P U T S
+ */
+struct v4l2_output {
+	__u32	     index;		/*  Which output */
+	__u8	     name[32];		/*  Label */
+	__u32	     type;		/*  Type of output */
+	__u32	     audioset;		/*  Associated audios (bitfield) */
+	__u32	     modulator;         /*  Associated modulator */
+	v4l2_std_id  std;
+	__u32	     capabilities;
+	__u32	     reserved[3];
+};
+/*  Values for the 'type' field */
+#define V4L2_OUTPUT_TYPE_MODULATOR		1
+#define V4L2_OUTPUT_TYPE_ANALOG			2
+#define V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY	3
+
+/* capabilities flags */
+#define V4L2_OUT_CAP_PRESETS		0x00000001 /* Supports S_DV_PRESET */
+#define V4L2_OUT_CAP_CUSTOM_TIMINGS	0x00000002 /* Supports S_DV_TIMINGS */
+#define V4L2_OUT_CAP_STD		0x00000004 /* Supports S_STD */
+
+/*
+ *	C O N T R O L S
+ */
+struct v4l2_control {
+	__u32		     id;
+	__s32		     value;
+};
+
+struct v4l2_ext_control {
+	__u32 id;
+	__u32 size;
+	__u32 reserved2[1];
+	union {
+		__s32 value;
+		__s64 value64;
+		char *string;
+	};
+} __attribute__ ((packed));
+
+struct v4l2_ext_controls {
+	__u32 ctrl_class;
+	__u32 count;
+	__u32 error_idx;
+	__u32 reserved[2];
+	struct v4l2_ext_control *controls;
+};
+
+/*  Values for ctrl_class field */
+#define V4L2_CTRL_CLASS_USER 0x00980000	/* Old-style 'user' controls */
+#define V4L2_CTRL_CLASS_MPEG 0x00990000	/* MPEG-compression controls */
+#define V4L2_CTRL_CLASS_CAMERA 0x009a0000	/* Camera class controls */
+#define V4L2_CTRL_CLASS_FM_TX 0x009b0000	/* FM Modulator control class */
+#define V4L2_CTRL_CLASS_FLASH 0x009c0000	/* Camera flash controls */
+#define V4L2_CTRL_CLASS_JPEG 0x009d0000		/* JPEG-compression controls */
+
+#define V4L2_CTRL_ID_MASK      	  (0x0fffffff)
+#define V4L2_CTRL_ID2CLASS(id)    ((id) & 0x0fff0000UL)
+#define V4L2_CTRL_DRIVER_PRIV(id) (((id) & 0xffff) >= 0x1000)
+
+enum v4l2_ctrl_type {
+	V4L2_CTRL_TYPE_INTEGER	     = 1,
+	V4L2_CTRL_TYPE_BOOLEAN	     = 2,
+	V4L2_CTRL_TYPE_MENU	     = 3,
+	V4L2_CTRL_TYPE_BUTTON	     = 4,
+	V4L2_CTRL_TYPE_INTEGER64     = 5,
+	V4L2_CTRL_TYPE_CTRL_CLASS    = 6,
+	V4L2_CTRL_TYPE_STRING        = 7,
+	V4L2_CTRL_TYPE_BITMASK       = 8,
+};
+
+/*  Used in the VIDIOC_QUERYCTRL ioctl for querying controls */
+struct v4l2_queryctrl {
+	__u32		     id;
+	enum v4l2_ctrl_type  type;
+	__u8		     name[32];	/* Whatever */
+	__s32		     minimum;	/* Note signedness */
+	__s32		     maximum;
+	__s32		     step;
+	__s32		     default_value;
+	__u32                flags;
+	__u32		     reserved[2];
+};
+
+/*  Used in the VIDIOC_QUERYMENU ioctl for querying menu items */
+struct v4l2_querymenu {
+	__u32		id;
+	__u32		index;
+	__u8		name[32];	/* Whatever */
+	__u32		reserved;
+};
+
+/*  Control flags  */
+#define V4L2_CTRL_FLAG_DISABLED		0x0001
+#define V4L2_CTRL_FLAG_GRABBED		0x0002
+#define V4L2_CTRL_FLAG_READ_ONLY 	0x0004
+#define V4L2_CTRL_FLAG_UPDATE 		0x0008
+#define V4L2_CTRL_FLAG_INACTIVE 	0x0010
+#define V4L2_CTRL_FLAG_SLIDER 		0x0020
+#define V4L2_CTRL_FLAG_WRITE_ONLY 	0x0040
+#define V4L2_CTRL_FLAG_VOLATILE		0x0080
+
+/*  Query flag, to be ORed with the control ID */
+#define V4L2_CTRL_FLAG_NEXT_CTRL	0x80000000
+
+/*  User-class control IDs defined by V4L2 */
+#define V4L2_CID_MAX_CTRLS		1024
+#define V4L2_CID_BASE			(V4L2_CTRL_CLASS_USER | 0x900)
+#define V4L2_CID_USER_BASE 		V4L2_CID_BASE
+/*  IDs reserved for driver specific controls */
+#define V4L2_CID_PRIVATE_BASE		0x08000000
+
+#define V4L2_CID_USER_CLASS 		(V4L2_CTRL_CLASS_USER | 1)
+#define V4L2_CID_BRIGHTNESS		(V4L2_CID_BASE+0)
+#define V4L2_CID_CONTRAST		(V4L2_CID_BASE+1)
+#define V4L2_CID_SATURATION		(V4L2_CID_BASE+2)
+#define V4L2_CID_HUE			(V4L2_CID_BASE+3)
+#define V4L2_CID_AUDIO_VOLUME		(V4L2_CID_BASE+5)
+#define V4L2_CID_AUDIO_BALANCE		(V4L2_CID_BASE+6)
+#define V4L2_CID_AUDIO_BASS		(V4L2_CID_BASE+7)
+#define V4L2_CID_AUDIO_TREBLE		(V4L2_CID_BASE+8)
+#define V4L2_CID_AUDIO_MUTE		(V4L2_CID_BASE+9)
+#define V4L2_CID_AUDIO_LOUDNESS		(V4L2_CID_BASE+10)
+#define V4L2_CID_BLACK_LEVEL		(V4L2_CID_BASE+11) /* Deprecated */
+#define V4L2_CID_AUTO_WHITE_BALANCE	(V4L2_CID_BASE+12)
+#define V4L2_CID_DO_WHITE_BALANCE	(V4L2_CID_BASE+13)
+#define V4L2_CID_RED_BALANCE		(V4L2_CID_BASE+14)
+#define V4L2_CID_BLUE_BALANCE		(V4L2_CID_BASE+15)
+#define V4L2_CID_GAMMA			(V4L2_CID_BASE+16)
+#define V4L2_CID_WHITENESS		(V4L2_CID_GAMMA) /* Deprecated */
+#define V4L2_CID_EXPOSURE		(V4L2_CID_BASE+17)
+#define V4L2_CID_AUTOGAIN		(V4L2_CID_BASE+18)
+#define V4L2_CID_GAIN			(V4L2_CID_BASE+19)
+#define V4L2_CID_HFLIP			(V4L2_CID_BASE+20)
+#define V4L2_CID_VFLIP			(V4L2_CID_BASE+21)
+
+/* Deprecated; use V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET */
+#define V4L2_CID_HCENTER		(V4L2_CID_BASE+22)
+#define V4L2_CID_VCENTER		(V4L2_CID_BASE+23)
+
+#define V4L2_CID_POWER_LINE_FREQUENCY	(V4L2_CID_BASE+24)
+enum v4l2_power_line_frequency {
+	V4L2_CID_POWER_LINE_FREQUENCY_DISABLED	= 0,
+	V4L2_CID_POWER_LINE_FREQUENCY_50HZ	= 1,
+	V4L2_CID_POWER_LINE_FREQUENCY_60HZ	= 2,
+	V4L2_CID_POWER_LINE_FREQUENCY_AUTO	= 3,
+};
+#define V4L2_CID_HUE_AUTO			(V4L2_CID_BASE+25)
+#define V4L2_CID_WHITE_BALANCE_TEMPERATURE	(V4L2_CID_BASE+26)
+#define V4L2_CID_SHARPNESS			(V4L2_CID_BASE+27)
+#define V4L2_CID_BACKLIGHT_COMPENSATION 	(V4L2_CID_BASE+28)
+#define V4L2_CID_CHROMA_AGC                     (V4L2_CID_BASE+29)
+#define V4L2_CID_COLOR_KILLER                   (V4L2_CID_BASE+30)
+#define V4L2_CID_COLORFX			(V4L2_CID_BASE+31)
+enum v4l2_colorfx {
+	V4L2_COLORFX_NONE	= 0,
+	V4L2_COLORFX_BW		= 1,
+	V4L2_COLORFX_SEPIA	= 2,
+	V4L2_COLORFX_NEGATIVE = 3,
+	V4L2_COLORFX_EMBOSS = 4,
+	V4L2_COLORFX_SKETCH = 5,
+	V4L2_COLORFX_SKY_BLUE = 6,
+	V4L2_COLORFX_GRASS_GREEN = 7,
+	V4L2_COLORFX_SKIN_WHITEN = 8,
+	V4L2_COLORFX_VIVID = 9,
+};
+#define V4L2_CID_AUTOBRIGHTNESS			(V4L2_CID_BASE+32)
+#define V4L2_CID_BAND_STOP_FILTER		(V4L2_CID_BASE+33)
+
+#define V4L2_CID_ROTATE				(V4L2_CID_BASE+34)
+#define V4L2_CID_BG_COLOR			(V4L2_CID_BASE+35)
+
+#define V4L2_CID_CHROMA_GAIN                    (V4L2_CID_BASE+36)
+
+#define V4L2_CID_ILLUMINATORS_1			(V4L2_CID_BASE+37)
+#define V4L2_CID_ILLUMINATORS_2			(V4L2_CID_BASE+38)
+
+#define V4L2_CID_MIN_BUFFERS_FOR_CAPTURE	(V4L2_CID_BASE+39)
+#define V4L2_CID_MIN_BUFFERS_FOR_OUTPUT		(V4L2_CID_BASE+40)
+
+#define V4L2_CID_ALPHA_COMPONENT		(V4L2_CID_BASE+41)
+
+/* last CID + 1 */
+#define V4L2_CID_LASTP1                         (V4L2_CID_BASE+42)
+
+/*  MPEG-class control IDs defined by V4L2 */
+#define V4L2_CID_MPEG_BASE 			(V4L2_CTRL_CLASS_MPEG | 0x900)
+#define V4L2_CID_MPEG_CLASS 			(V4L2_CTRL_CLASS_MPEG | 1)
+
+/*  MPEG streams, specific to multiplexed streams */
+#define V4L2_CID_MPEG_STREAM_TYPE 		(V4L2_CID_MPEG_BASE+0)
+enum v4l2_mpeg_stream_type {
+	V4L2_MPEG_STREAM_TYPE_MPEG2_PS   = 0, /* MPEG-2 program stream */
+	V4L2_MPEG_STREAM_TYPE_MPEG2_TS   = 1, /* MPEG-2 transport stream */
+	V4L2_MPEG_STREAM_TYPE_MPEG1_SS   = 2, /* MPEG-1 system stream */
+	V4L2_MPEG_STREAM_TYPE_MPEG2_DVD  = 3, /* MPEG-2 DVD-compatible stream */
+	V4L2_MPEG_STREAM_TYPE_MPEG1_VCD  = 4, /* MPEG-1 VCD-compatible stream */
+	V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD = 5, /* MPEG-2 SVCD-compatible stream */
+};
+#define V4L2_CID_MPEG_STREAM_PID_PMT 		(V4L2_CID_MPEG_BASE+1)
+#define V4L2_CID_MPEG_STREAM_PID_AUDIO 		(V4L2_CID_MPEG_BASE+2)
+#define V4L2_CID_MPEG_STREAM_PID_VIDEO 		(V4L2_CID_MPEG_BASE+3)
+#define V4L2_CID_MPEG_STREAM_PID_PCR 		(V4L2_CID_MPEG_BASE+4)
+#define V4L2_CID_MPEG_STREAM_PES_ID_AUDIO 	(V4L2_CID_MPEG_BASE+5)
+#define V4L2_CID_MPEG_STREAM_PES_ID_VIDEO 	(V4L2_CID_MPEG_BASE+6)
+#define V4L2_CID_MPEG_STREAM_VBI_FMT 		(V4L2_CID_MPEG_BASE+7)
+enum v4l2_mpeg_stream_vbi_fmt {
+	V4L2_MPEG_STREAM_VBI_FMT_NONE = 0,  /* No VBI in the MPEG stream */
+	V4L2_MPEG_STREAM_VBI_FMT_IVTV = 1,  /* VBI in private packets, IVTV format */
+};
+
+/*  MPEG audio controls specific to multiplexed streams  */
+#define V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ 	(V4L2_CID_MPEG_BASE+100)
+enum v4l2_mpeg_audio_sampling_freq {
+	V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100 = 0,
+	V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000 = 1,
+	V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000 = 2,
+};
+#define V4L2_CID_MPEG_AUDIO_ENCODING 		(V4L2_CID_MPEG_BASE+101)
+enum v4l2_mpeg_audio_encoding {
+	V4L2_MPEG_AUDIO_ENCODING_LAYER_1 = 0,
+	V4L2_MPEG_AUDIO_ENCODING_LAYER_2 = 1,
+	V4L2_MPEG_AUDIO_ENCODING_LAYER_3 = 2,
+	V4L2_MPEG_AUDIO_ENCODING_AAC     = 3,
+	V4L2_MPEG_AUDIO_ENCODING_AC3     = 4,
+};
+#define V4L2_CID_MPEG_AUDIO_L1_BITRATE 		(V4L2_CID_MPEG_BASE+102)
+enum v4l2_mpeg_audio_l1_bitrate {
+	V4L2_MPEG_AUDIO_L1_BITRATE_32K  = 0,
+	V4L2_MPEG_AUDIO_L1_BITRATE_64K  = 1,
+	V4L2_MPEG_AUDIO_L1_BITRATE_96K  = 2,
+	V4L2_MPEG_AUDIO_L1_BITRATE_128K = 3,
+	V4L2_MPEG_AUDIO_L1_BITRATE_160K = 4,
+	V4L2_MPEG_AUDIO_L1_BITRATE_192K = 5,
+	V4L2_MPEG_AUDIO_L1_BITRATE_224K = 6,
+	V4L2_MPEG_AUDIO_L1_BITRATE_256K = 7,
+	V4L2_MPEG_AUDIO_L1_BITRATE_288K = 8,
+	V4L2_MPEG_AUDIO_L1_BITRATE_320K = 9,
+	V4L2_MPEG_AUDIO_L1_BITRATE_352K = 10,
+	V4L2_MPEG_AUDIO_L1_BITRATE_384K = 11,
+	V4L2_MPEG_AUDIO_L1_BITRATE_416K = 12,
+	V4L2_MPEG_AUDIO_L1_BITRATE_448K = 13,
+};
+#define V4L2_CID_MPEG_AUDIO_L2_BITRATE 		(V4L2_CID_MPEG_BASE+103)
+enum v4l2_mpeg_audio_l2_bitrate {
+	V4L2_MPEG_AUDIO_L2_BITRATE_32K  = 0,
+	V4L2_MPEG_AUDIO_L2_BITRATE_48K  = 1,
+	V4L2_MPEG_AUDIO_L2_BITRATE_56K  = 2,
+	V4L2_MPEG_AUDIO_L2_BITRATE_64K  = 3,
+	V4L2_MPEG_AUDIO_L2_BITRATE_80K  = 4,
+	V4L2_MPEG_AUDIO_L2_BITRATE_96K  = 5,
+	V4L2_MPEG_AUDIO_L2_BITRATE_112K = 6,
+	V4L2_MPEG_AUDIO_L2_BITRATE_128K = 7,
+	V4L2_MPEG_AUDIO_L2_BITRATE_160K = 8,
+	V4L2_MPEG_AUDIO_L2_BITRATE_192K = 9,
+	V4L2_MPEG_AUDIO_L2_BITRATE_224K = 10,
+	V4L2_MPEG_AUDIO_L2_BITRATE_256K = 11,
+	V4L2_MPEG_AUDIO_L2_BITRATE_320K = 12,
+	V4L2_MPEG_AUDIO_L2_BITRATE_384K = 13,
+};
+#define V4L2_CID_MPEG_AUDIO_L3_BITRATE 		(V4L2_CID_MPEG_BASE+104)
+enum v4l2_mpeg_audio_l3_bitrate {
+	V4L2_MPEG_AUDIO_L3_BITRATE_32K  = 0,
+	V4L2_MPEG_AUDIO_L3_BITRATE_40K  = 1,
+	V4L2_MPEG_AUDIO_L3_BITRATE_48K  = 2,
+	V4L2_MPEG_AUDIO_L3_BITRATE_56K  = 3,
+	V4L2_MPEG_AUDIO_L3_BITRATE_64K  = 4,
+	V4L2_MPEG_AUDIO_L3_BITRATE_80K  = 5,
+	V4L2_MPEG_AUDIO_L3_BITRATE_96K  = 6,
+	V4L2_MPEG_AUDIO_L3_BITRATE_112K = 7,
+	V4L2_MPEG_AUDIO_L3_BITRATE_128K = 8,
+	V4L2_MPEG_AUDIO_L3_BITRATE_160K = 9,
+	V4L2_MPEG_AUDIO_L3_BITRATE_192K = 10,
+	V4L2_MPEG_AUDIO_L3_BITRATE_224K = 11,
+	V4L2_MPEG_AUDIO_L3_BITRATE_256K = 12,
+	V4L2_MPEG_AUDIO_L3_BITRATE_320K = 13,
+};
+#define V4L2_CID_MPEG_AUDIO_MODE 		(V4L2_CID_MPEG_BASE+105)
+enum v4l2_mpeg_audio_mode {
+	V4L2_MPEG_AUDIO_MODE_STEREO       = 0,
+	V4L2_MPEG_AUDIO_MODE_JOINT_STEREO = 1,
+	V4L2_MPEG_AUDIO_MODE_DUAL         = 2,
+	V4L2_MPEG_AUDIO_MODE_MONO         = 3,
+};
+#define V4L2_CID_MPEG_AUDIO_MODE_EXTENSION 	(V4L2_CID_MPEG_BASE+106)
+enum v4l2_mpeg_audio_mode_extension {
+	V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4  = 0,
+	V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_8  = 1,
+	V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_12 = 2,
+	V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16 = 3,
+};
+#define V4L2_CID_MPEG_AUDIO_EMPHASIS 		(V4L2_CID_MPEG_BASE+107)
+enum v4l2_mpeg_audio_emphasis {
+	V4L2_MPEG_AUDIO_EMPHASIS_NONE         = 0,
+	V4L2_MPEG_AUDIO_EMPHASIS_50_DIV_15_uS = 1,
+	V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17    = 2,
+};
+#define V4L2_CID_MPEG_AUDIO_CRC 		(V4L2_CID_MPEG_BASE+108)
+enum v4l2_mpeg_audio_crc {
+	V4L2_MPEG_AUDIO_CRC_NONE  = 0,
+	V4L2_MPEG_AUDIO_CRC_CRC16 = 1,
+};
+#define V4L2_CID_MPEG_AUDIO_MUTE 		(V4L2_CID_MPEG_BASE+109)
+#define V4L2_CID_MPEG_AUDIO_AAC_BITRATE		(V4L2_CID_MPEG_BASE+110)
+#define V4L2_CID_MPEG_AUDIO_AC3_BITRATE		(V4L2_CID_MPEG_BASE+111)
+enum v4l2_mpeg_audio_ac3_bitrate {
+	V4L2_MPEG_AUDIO_AC3_BITRATE_32K  = 0,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_40K  = 1,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_48K  = 2,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_56K  = 3,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_64K  = 4,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_80K  = 5,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_96K  = 6,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_112K = 7,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_128K = 8,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_160K = 9,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_192K = 10,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_224K = 11,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_256K = 12,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_320K = 13,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_384K = 14,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_448K = 15,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_512K = 16,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_576K = 17,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_640K = 18,
+};
+#define V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK	(V4L2_CID_MPEG_BASE+112)
+enum v4l2_mpeg_audio_dec_playback {
+	V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO	    = 0,
+	V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO	    = 1,
+	V4L2_MPEG_AUDIO_DEC_PLAYBACK_LEFT	    = 2,
+	V4L2_MPEG_AUDIO_DEC_PLAYBACK_RIGHT	    = 3,
+	V4L2_MPEG_AUDIO_DEC_PLAYBACK_MONO	    = 4,
+	V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO = 5,
+};
+#define V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK (V4L2_CID_MPEG_BASE+113)
+
+/*  MPEG video controls specific to multiplexed streams */
+#define V4L2_CID_MPEG_VIDEO_ENCODING 		(V4L2_CID_MPEG_BASE+200)
+enum v4l2_mpeg_video_encoding {
+	V4L2_MPEG_VIDEO_ENCODING_MPEG_1     = 0,
+	V4L2_MPEG_VIDEO_ENCODING_MPEG_2     = 1,
+	V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC = 2,
+};
+#define V4L2_CID_MPEG_VIDEO_ASPECT 		(V4L2_CID_MPEG_BASE+201)
+enum v4l2_mpeg_video_aspect {
+	V4L2_MPEG_VIDEO_ASPECT_1x1     = 0,
+	V4L2_MPEG_VIDEO_ASPECT_4x3     = 1,
+	V4L2_MPEG_VIDEO_ASPECT_16x9    = 2,
+	V4L2_MPEG_VIDEO_ASPECT_221x100 = 3,
+};
+#define V4L2_CID_MPEG_VIDEO_B_FRAMES 		(V4L2_CID_MPEG_BASE+202)
+#define V4L2_CID_MPEG_VIDEO_GOP_SIZE 		(V4L2_CID_MPEG_BASE+203)
+#define V4L2_CID_MPEG_VIDEO_GOP_CLOSURE 	(V4L2_CID_MPEG_BASE+204)
+#define V4L2_CID_MPEG_VIDEO_PULLDOWN 		(V4L2_CID_MPEG_BASE+205)
+#define V4L2_CID_MPEG_VIDEO_BITRATE_MODE 	(V4L2_CID_MPEG_BASE+206)
+enum v4l2_mpeg_video_bitrate_mode {
+	V4L2_MPEG_VIDEO_BITRATE_MODE_VBR = 0,
+	V4L2_MPEG_VIDEO_BITRATE_MODE_CBR = 1,
+};
+#define V4L2_CID_MPEG_VIDEO_BITRATE 		(V4L2_CID_MPEG_BASE+207)
+#define V4L2_CID_MPEG_VIDEO_BITRATE_PEAK 	(V4L2_CID_MPEG_BASE+208)
+#define V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION (V4L2_CID_MPEG_BASE+209)
+#define V4L2_CID_MPEG_VIDEO_MUTE 		(V4L2_CID_MPEG_BASE+210)
+#define V4L2_CID_MPEG_VIDEO_MUTE_YUV 		(V4L2_CID_MPEG_BASE+211)
+#define V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE		(V4L2_CID_MPEG_BASE+212)
+#define V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER	(V4L2_CID_MPEG_BASE+213)
+#define V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB		(V4L2_CID_MPEG_BASE+214)
+#define V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE			(V4L2_CID_MPEG_BASE+215)
+#define V4L2_CID_MPEG_VIDEO_HEADER_MODE				(V4L2_CID_MPEG_BASE+216)
+enum v4l2_mpeg_video_header_mode {
+	V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE			= 0,
+	V4L2_MPEG_VIDEO_HEADER_MODE_JOINED_WITH_1ST_FRAME	= 1,
+
+};
+#define V4L2_CID_MPEG_VIDEO_MAX_REF_PIC			(V4L2_CID_MPEG_BASE+217)
+#define V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE		(V4L2_CID_MPEG_BASE+218)
+#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES	(V4L2_CID_MPEG_BASE+219)
+#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB		(V4L2_CID_MPEG_BASE+220)
+#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE		(V4L2_CID_MPEG_BASE+221)
+enum v4l2_mpeg_video_multi_slice_mode {
+	V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE		= 0,
+	V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_MB		= 1,
+	V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_BYTES	= 2,
+};
+#define V4L2_CID_MPEG_VIDEO_VBV_SIZE			(V4L2_CID_MPEG_BASE+222)
+#define V4L2_CID_MPEG_VIDEO_DEC_PTS			(V4L2_CID_MPEG_BASE+223)
+#define V4L2_CID_MPEG_VIDEO_DEC_FRAME			(V4L2_CID_MPEG_BASE+224)
+
+#define V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP		(V4L2_CID_MPEG_BASE+300)
+#define V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP		(V4L2_CID_MPEG_BASE+301)
+#define V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP		(V4L2_CID_MPEG_BASE+302)
+#define V4L2_CID_MPEG_VIDEO_H263_MIN_QP			(V4L2_CID_MPEG_BASE+303)
+#define V4L2_CID_MPEG_VIDEO_H263_MAX_QP			(V4L2_CID_MPEG_BASE+304)
+#define V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP		(V4L2_CID_MPEG_BASE+350)
+#define V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP		(V4L2_CID_MPEG_BASE+351)
+#define V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP		(V4L2_CID_MPEG_BASE+352)
+#define V4L2_CID_MPEG_VIDEO_H264_MIN_QP			(V4L2_CID_MPEG_BASE+353)
+#define V4L2_CID_MPEG_VIDEO_H264_MAX_QP			(V4L2_CID_MPEG_BASE+354)
+#define V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM		(V4L2_CID_MPEG_BASE+355)
+#define V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE		(V4L2_CID_MPEG_BASE+356)
+#define V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE		(V4L2_CID_MPEG_BASE+357)
+enum v4l2_mpeg_video_h264_entropy_mode {
+	V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CAVLC	= 0,
+	V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CABAC	= 1,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_I_PERIOD		(V4L2_CID_MPEG_BASE+358)
+#define V4L2_CID_MPEG_VIDEO_H264_LEVEL			(V4L2_CID_MPEG_BASE+359)
+enum v4l2_mpeg_video_h264_level {
+	V4L2_MPEG_VIDEO_H264_LEVEL_1_0	= 0,
+	V4L2_MPEG_VIDEO_H264_LEVEL_1B	= 1,
+	V4L2_MPEG_VIDEO_H264_LEVEL_1_1	= 2,
+	V4L2_MPEG_VIDEO_H264_LEVEL_1_2	= 3,
+	V4L2_MPEG_VIDEO_H264_LEVEL_1_3	= 4,
+	V4L2_MPEG_VIDEO_H264_LEVEL_2_0	= 5,
+	V4L2_MPEG_VIDEO_H264_LEVEL_2_1	= 6,
+	V4L2_MPEG_VIDEO_H264_LEVEL_2_2	= 7,
+	V4L2_MPEG_VIDEO_H264_LEVEL_3_0	= 8,
+	V4L2_MPEG_VIDEO_H264_LEVEL_3_1	= 9,
+	V4L2_MPEG_VIDEO_H264_LEVEL_3_2	= 10,
+	V4L2_MPEG_VIDEO_H264_LEVEL_4_0	= 11,
+	V4L2_MPEG_VIDEO_H264_LEVEL_4_1	= 12,
+	V4L2_MPEG_VIDEO_H264_LEVEL_4_2	= 13,
+	V4L2_MPEG_VIDEO_H264_LEVEL_5_0	= 14,
+	V4L2_MPEG_VIDEO_H264_LEVEL_5_1	= 15,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA	(V4L2_CID_MPEG_BASE+360)
+#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA	(V4L2_CID_MPEG_BASE+361)
+#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE	(V4L2_CID_MPEG_BASE+362)
+enum v4l2_mpeg_video_h264_loop_filter_mode {
+	V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_ENABLED				= 0,
+	V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED				= 1,
+	V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY	= 2,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_PROFILE		(V4L2_CID_MPEG_BASE+363)
+enum v4l2_mpeg_video_h264_profile {
+	V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE			= 0,
+	V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE	= 1,
+	V4L2_MPEG_VIDEO_H264_PROFILE_MAIN			= 2,
+	V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED			= 3,
+	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH			= 4,
+	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10			= 5,
+	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422			= 6,
+	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_PREDICTIVE	= 7,
+	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10_INTRA		= 8,
+	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422_INTRA		= 9,
+	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_INTRA		= 10,
+	V4L2_MPEG_VIDEO_H264_PROFILE_CAVLC_444_INTRA		= 11,
+	V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_BASELINE		= 12,
+	V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH		= 13,
+	V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH_INTRA	= 14,
+	V4L2_MPEG_VIDEO_H264_PROFILE_STEREO_HIGH		= 15,
+	V4L2_MPEG_VIDEO_H264_PROFILE_MULTIVIEW_HIGH		= 16,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_HEIGHT	(V4L2_CID_MPEG_BASE+364)
+#define V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_WIDTH	(V4L2_CID_MPEG_BASE+365)
+#define V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE		(V4L2_CID_MPEG_BASE+366)
+#define V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC		(V4L2_CID_MPEG_BASE+367)
+enum v4l2_mpeg_video_h264_vui_sar_idc {
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED	= 0,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_1x1		= 1,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_12x11		= 2,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_10x11		= 3,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_16x11		= 4,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_40x33		= 5,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_24x11		= 6,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_20x11		= 7,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_32x11		= 8,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_80x33		= 9,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_18x11		= 10,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_15x11		= 11,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_64x33		= 12,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_160x99		= 13,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_4x3		= 14,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_3x2		= 15,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_2x1		= 16,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED	= 17,
+};
+#define V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP	(V4L2_CID_MPEG_BASE+400)
+#define V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP	(V4L2_CID_MPEG_BASE+401)
+#define V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP	(V4L2_CID_MPEG_BASE+402)
+#define V4L2_CID_MPEG_VIDEO_MPEG4_MIN_QP	(V4L2_CID_MPEG_BASE+403)
+#define V4L2_CID_MPEG_VIDEO_MPEG4_MAX_QP	(V4L2_CID_MPEG_BASE+404)
+#define V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL		(V4L2_CID_MPEG_BASE+405)
+enum v4l2_mpeg_video_mpeg4_level {
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_0	= 0,
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_0B	= 1,
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_1	= 2,
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_2	= 3,
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_3	= 4,
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_3B	= 5,
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_4	= 6,
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_5	= 7,
+};
+#define V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE	(V4L2_CID_MPEG_BASE+406)
+enum v4l2_mpeg_video_mpeg4_profile {
+	V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE				= 0,
+	V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE			= 1,
+	V4L2_MPEG_VIDEO_MPEG4_PROFILE_CORE				= 2,
+	V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE_SCALABLE			= 3,
+	V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_CODING_EFFICIENCY	= 4,
+};
+#define V4L2_CID_MPEG_VIDEO_MPEG4_QPEL		(V4L2_CID_MPEG_BASE+407)
+
+/*  MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */
+#define V4L2_CID_MPEG_CX2341X_BASE 				(V4L2_CTRL_CLASS_MPEG | 0x1000)
+#define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE 	(V4L2_CID_MPEG_CX2341X_BASE+0)
+enum v4l2_mpeg_cx2341x_video_spatial_filter_mode {
+	V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL = 0,
+	V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO   = 1,
+};
+#define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER 		(V4L2_CID_MPEG_CX2341X_BASE+1)
+#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE 	(V4L2_CID_MPEG_CX2341X_BASE+2)
+enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type {
+	V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF                  = 0,
+	V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR               = 1,
+	V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_VERT              = 2,
+	V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_HV_SEPARABLE      = 3,
+	V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE = 4,
+};
+#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE 	(V4L2_CID_MPEG_CX2341X_BASE+3)
+enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type {
+	V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF    = 0,
+	V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR = 1,
+};
+#define V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE 	(V4L2_CID_MPEG_CX2341X_BASE+4)
+enum v4l2_mpeg_cx2341x_video_temporal_filter_mode {
+	V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL = 0,
+	V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO   = 1,
+};
+#define V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER 		(V4L2_CID_MPEG_CX2341X_BASE+5)
+#define V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE 		(V4L2_CID_MPEG_CX2341X_BASE+6)
+enum v4l2_mpeg_cx2341x_video_median_filter_type {
+	V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF      = 0,
+	V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR      = 1,
+	V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_VERT     = 2,
+	V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR_VERT = 3,
+	V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG     = 4,
+};
+#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM 	(V4L2_CID_MPEG_CX2341X_BASE+7)
+#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP 	(V4L2_CID_MPEG_CX2341X_BASE+8)
+#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM	(V4L2_CID_MPEG_CX2341X_BASE+9)
+#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP 	(V4L2_CID_MPEG_CX2341X_BASE+10)
+#define V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS 	(V4L2_CID_MPEG_CX2341X_BASE+11)
+
+/*  MPEG-class control IDs specific to the Samsung MFC 5.1 driver as defined by V4L2 */
+#define V4L2_CID_MPEG_MFC51_BASE				(V4L2_CTRL_CLASS_MPEG | 0x1100)
+
+#define V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY		(V4L2_CID_MPEG_MFC51_BASE+0)
+#define V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE	(V4L2_CID_MPEG_MFC51_BASE+1)
+#define V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE			(V4L2_CID_MPEG_MFC51_BASE+2)
+enum v4l2_mpeg_mfc51_video_frame_skip_mode {
+	V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_DISABLED		= 0,
+	V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_LEVEL_LIMIT	= 1,
+	V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT		= 2,
+};
+#define V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE			(V4L2_CID_MPEG_MFC51_BASE+3)
+enum v4l2_mpeg_mfc51_video_force_frame_type {
+	V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_DISABLED		= 0,
+	V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_I_FRAME		= 1,
+	V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_NOT_CODED	= 2,
+};
+#define V4L2_CID_MPEG_MFC51_VIDEO_PADDING				(V4L2_CID_MPEG_MFC51_BASE+4)
+#define V4L2_CID_MPEG_MFC51_VIDEO_PADDING_YUV				(V4L2_CID_MPEG_MFC51_BASE+5)
+#define V4L2_CID_MPEG_MFC51_VIDEO_RC_FIXED_TARGET_BIT			(V4L2_CID_MPEG_MFC51_BASE+6)
+#define V4L2_CID_MPEG_MFC51_VIDEO_RC_REACTION_COEFF			(V4L2_CID_MPEG_MFC51_BASE+7)
+#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_ACTIVITY		(V4L2_CID_MPEG_MFC51_BASE+50)
+#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_DARK			(V4L2_CID_MPEG_MFC51_BASE+51)
+#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_SMOOTH		(V4L2_CID_MPEG_MFC51_BASE+52)
+#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_STATIC		(V4L2_CID_MPEG_MFC51_BASE+53)
+#define V4L2_CID_MPEG_MFC51_VIDEO_H264_NUM_REF_PIC_FOR_P		(V4L2_CID_MPEG_MFC51_BASE+54)
+
+/*  Camera class control IDs */
+#define V4L2_CID_CAMERA_CLASS_BASE 	(V4L2_CTRL_CLASS_CAMERA | 0x900)
+#define V4L2_CID_CAMERA_CLASS 		(V4L2_CTRL_CLASS_CAMERA | 1)
+
+#define V4L2_CID_EXPOSURE_AUTO			(V4L2_CID_CAMERA_CLASS_BASE+1)
+enum  v4l2_exposure_auto_type {
+	V4L2_EXPOSURE_AUTO = 0,
+	V4L2_EXPOSURE_MANUAL = 1,
+	V4L2_EXPOSURE_SHUTTER_PRIORITY = 2,
+	V4L2_EXPOSURE_APERTURE_PRIORITY = 3
+};
+#define V4L2_CID_EXPOSURE_ABSOLUTE		(V4L2_CID_CAMERA_CLASS_BASE+2)
+#define V4L2_CID_EXPOSURE_AUTO_PRIORITY		(V4L2_CID_CAMERA_CLASS_BASE+3)
+
+#define V4L2_CID_PAN_RELATIVE			(V4L2_CID_CAMERA_CLASS_BASE+4)
+#define V4L2_CID_TILT_RELATIVE			(V4L2_CID_CAMERA_CLASS_BASE+5)
+#define V4L2_CID_PAN_RESET			(V4L2_CID_CAMERA_CLASS_BASE+6)
+#define V4L2_CID_TILT_RESET			(V4L2_CID_CAMERA_CLASS_BASE+7)
+
+#define V4L2_CID_PAN_ABSOLUTE			(V4L2_CID_CAMERA_CLASS_BASE+8)
+#define V4L2_CID_TILT_ABSOLUTE			(V4L2_CID_CAMERA_CLASS_BASE+9)
+
+#define V4L2_CID_FOCUS_ABSOLUTE			(V4L2_CID_CAMERA_CLASS_BASE+10)
+#define V4L2_CID_FOCUS_RELATIVE			(V4L2_CID_CAMERA_CLASS_BASE+11)
+#define V4L2_CID_FOCUS_AUTO			(V4L2_CID_CAMERA_CLASS_BASE+12)
+
+#define V4L2_CID_ZOOM_ABSOLUTE			(V4L2_CID_CAMERA_CLASS_BASE+13)
+#define V4L2_CID_ZOOM_RELATIVE			(V4L2_CID_CAMERA_CLASS_BASE+14)
+#define V4L2_CID_ZOOM_CONTINUOUS		(V4L2_CID_CAMERA_CLASS_BASE+15)
+
+#define V4L2_CID_PRIVACY			(V4L2_CID_CAMERA_CLASS_BASE+16)
+
+#define V4L2_CID_IRIS_ABSOLUTE			(V4L2_CID_CAMERA_CLASS_BASE+17)
+#define V4L2_CID_IRIS_RELATIVE			(V4L2_CID_CAMERA_CLASS_BASE+18)
+
+/* FM Modulator class control IDs */
+#define V4L2_CID_FM_TX_CLASS_BASE		(V4L2_CTRL_CLASS_FM_TX | 0x900)
+#define V4L2_CID_FM_TX_CLASS			(V4L2_CTRL_CLASS_FM_TX | 1)
+
+#define V4L2_CID_RDS_TX_DEVIATION		(V4L2_CID_FM_TX_CLASS_BASE + 1)
+#define V4L2_CID_RDS_TX_PI			(V4L2_CID_FM_TX_CLASS_BASE + 2)
+#define V4L2_CID_RDS_TX_PTY			(V4L2_CID_FM_TX_CLASS_BASE + 3)
+#define V4L2_CID_RDS_TX_PS_NAME			(V4L2_CID_FM_TX_CLASS_BASE + 5)
+#define V4L2_CID_RDS_TX_RADIO_TEXT		(V4L2_CID_FM_TX_CLASS_BASE + 6)
+
+#define V4L2_CID_AUDIO_LIMITER_ENABLED		(V4L2_CID_FM_TX_CLASS_BASE + 64)
+#define V4L2_CID_AUDIO_LIMITER_RELEASE_TIME	(V4L2_CID_FM_TX_CLASS_BASE + 65)
+#define V4L2_CID_AUDIO_LIMITER_DEVIATION	(V4L2_CID_FM_TX_CLASS_BASE + 66)
+
+#define V4L2_CID_AUDIO_COMPRESSION_ENABLED	(V4L2_CID_FM_TX_CLASS_BASE + 80)
+#define V4L2_CID_AUDIO_COMPRESSION_GAIN		(V4L2_CID_FM_TX_CLASS_BASE + 81)
+#define V4L2_CID_AUDIO_COMPRESSION_THRESHOLD	(V4L2_CID_FM_TX_CLASS_BASE + 82)
+#define V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME	(V4L2_CID_FM_TX_CLASS_BASE + 83)
+#define V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME	(V4L2_CID_FM_TX_CLASS_BASE + 84)
+
+#define V4L2_CID_PILOT_TONE_ENABLED		(V4L2_CID_FM_TX_CLASS_BASE + 96)
+#define V4L2_CID_PILOT_TONE_DEVIATION		(V4L2_CID_FM_TX_CLASS_BASE + 97)
+#define V4L2_CID_PILOT_TONE_FREQUENCY		(V4L2_CID_FM_TX_CLASS_BASE + 98)
+
+#define V4L2_CID_TUNE_PREEMPHASIS		(V4L2_CID_FM_TX_CLASS_BASE + 112)
+enum v4l2_preemphasis {
+	V4L2_PREEMPHASIS_DISABLED	= 0,
+	V4L2_PREEMPHASIS_50_uS		= 1,
+	V4L2_PREEMPHASIS_75_uS		= 2,
+};
+#define V4L2_CID_TUNE_POWER_LEVEL		(V4L2_CID_FM_TX_CLASS_BASE + 113)
+#define V4L2_CID_TUNE_ANTENNA_CAPACITOR		(V4L2_CID_FM_TX_CLASS_BASE + 114)
+
+/* Flash and privacy (indicator) light controls */
+#define V4L2_CID_FLASH_CLASS_BASE		(V4L2_CTRL_CLASS_FLASH | 0x900)
+#define V4L2_CID_FLASH_CLASS			(V4L2_CTRL_CLASS_FLASH | 1)
+
+#define V4L2_CID_FLASH_LED_MODE			(V4L2_CID_FLASH_CLASS_BASE + 1)
+enum v4l2_flash_led_mode {
+	V4L2_FLASH_LED_MODE_NONE,
+	V4L2_FLASH_LED_MODE_FLASH,
+	V4L2_FLASH_LED_MODE_TORCH,
+};
+
+#define V4L2_CID_FLASH_STROBE_SOURCE		(V4L2_CID_FLASH_CLASS_BASE + 2)
+enum v4l2_flash_strobe_source {
+	V4L2_FLASH_STROBE_SOURCE_SOFTWARE,
+	V4L2_FLASH_STROBE_SOURCE_EXTERNAL,
+};
+
+#define V4L2_CID_FLASH_STROBE			(V4L2_CID_FLASH_CLASS_BASE + 3)
+#define V4L2_CID_FLASH_STROBE_STOP		(V4L2_CID_FLASH_CLASS_BASE + 4)
+#define V4L2_CID_FLASH_STROBE_STATUS		(V4L2_CID_FLASH_CLASS_BASE + 5)
+
+#define V4L2_CID_FLASH_TIMEOUT			(V4L2_CID_FLASH_CLASS_BASE + 6)
+#define V4L2_CID_FLASH_INTENSITY		(V4L2_CID_FLASH_CLASS_BASE + 7)
+#define V4L2_CID_FLASH_TORCH_INTENSITY		(V4L2_CID_FLASH_CLASS_BASE + 8)
+#define V4L2_CID_FLASH_INDICATOR_INTENSITY	(V4L2_CID_FLASH_CLASS_BASE + 9)
+
+#define V4L2_CID_FLASH_FAULT			(V4L2_CID_FLASH_CLASS_BASE + 10)
+#define V4L2_FLASH_FAULT_OVER_VOLTAGE		(1 << 0)
+#define V4L2_FLASH_FAULT_TIMEOUT		(1 << 1)
+#define V4L2_FLASH_FAULT_OVER_TEMPERATURE	(1 << 2)
+#define V4L2_FLASH_FAULT_SHORT_CIRCUIT		(1 << 3)
+#define V4L2_FLASH_FAULT_OVER_CURRENT		(1 << 4)
+#define V4L2_FLASH_FAULT_INDICATOR		(1 << 5)
+
+#define V4L2_CID_FLASH_CHARGE			(V4L2_CID_FLASH_CLASS_BASE + 11)
+#define V4L2_CID_FLASH_READY			(V4L2_CID_FLASH_CLASS_BASE + 12)
+
+/*  JPEG-class control IDs defined by V4L2 */
+#define V4L2_CID_JPEG_CLASS_BASE		(V4L2_CTRL_CLASS_JPEG | 0x900)
+#define V4L2_CID_JPEG_CLASS			(V4L2_CTRL_CLASS_JPEG | 1)
+
+#define	V4L2_CID_JPEG_CHROMA_SUBSAMPLING	(V4L2_CID_JPEG_CLASS_BASE + 1)
+enum v4l2_jpeg_chroma_subsampling {
+	V4L2_JPEG_CHROMA_SUBSAMPLING_444	= 0,
+	V4L2_JPEG_CHROMA_SUBSAMPLING_422	= 1,
+	V4L2_JPEG_CHROMA_SUBSAMPLING_420	= 2,
+	V4L2_JPEG_CHROMA_SUBSAMPLING_411	= 3,
+	V4L2_JPEG_CHROMA_SUBSAMPLING_410	= 4,
+	V4L2_JPEG_CHROMA_SUBSAMPLING_GRAY	= 5,
+};
+#define	V4L2_CID_JPEG_RESTART_INTERVAL		(V4L2_CID_JPEG_CLASS_BASE + 2)
+#define	V4L2_CID_JPEG_COMPRESSION_QUALITY	(V4L2_CID_JPEG_CLASS_BASE + 3)
+
+#define	V4L2_CID_JPEG_ACTIVE_MARKER		(V4L2_CID_JPEG_CLASS_BASE + 4)
+#define	V4L2_JPEG_ACTIVE_MARKER_APP0		(1 << 0)
+#define	V4L2_JPEG_ACTIVE_MARKER_APP1		(1 << 1)
+#define	V4L2_JPEG_ACTIVE_MARKER_COM		(1 << 16)
+#define	V4L2_JPEG_ACTIVE_MARKER_DQT		(1 << 17)
+#define	V4L2_JPEG_ACTIVE_MARKER_DHT		(1 << 18)
+
+/*
+ *	T U N I N G
+ */
+struct v4l2_tuner {
+	__u32                   index;
+	__u8			name[32];
+	enum v4l2_tuner_type    type;
+	__u32			capability;
+	__u32			rangelow;
+	__u32			rangehigh;
+	__u32			rxsubchans;
+	__u32			audmode;
+	__s32			signal;
+	__s32			afc;
+	__u32			reserved[4];
+};
+
+struct v4l2_modulator {
+	__u32			index;
+	__u8			name[32];
+	__u32			capability;
+	__u32			rangelow;
+	__u32			rangehigh;
+	__u32			txsubchans;
+	__u32			reserved[4];
+};
+
+/*  Flags for the 'capability' field */
+#define V4L2_TUNER_CAP_LOW		0x0001
+#define V4L2_TUNER_CAP_NORM		0x0002
+#define V4L2_TUNER_CAP_STEREO		0x0010
+#define V4L2_TUNER_CAP_LANG2		0x0020
+#define V4L2_TUNER_CAP_SAP		0x0020
+#define V4L2_TUNER_CAP_LANG1		0x0040
+#define V4L2_TUNER_CAP_RDS		0x0080
+#define V4L2_TUNER_CAP_RDS_BLOCK_IO	0x0100
+#define V4L2_TUNER_CAP_RDS_CONTROLS	0x0200
+
+/*  Flags for the 'rxsubchans' field */
+#define V4L2_TUNER_SUB_MONO		0x0001
+#define V4L2_TUNER_SUB_STEREO		0x0002
+#define V4L2_TUNER_SUB_LANG2		0x0004
+#define V4L2_TUNER_SUB_SAP		0x0004
+#define V4L2_TUNER_SUB_LANG1		0x0008
+#define V4L2_TUNER_SUB_RDS		0x0010
+
+/*  Values for the 'audmode' field */
+#define V4L2_TUNER_MODE_MONO		0x0000
+#define V4L2_TUNER_MODE_STEREO		0x0001
+#define V4L2_TUNER_MODE_LANG2		0x0002
+#define V4L2_TUNER_MODE_SAP		0x0002
+#define V4L2_TUNER_MODE_LANG1		0x0003
+#define V4L2_TUNER_MODE_LANG1_LANG2	0x0004
+
+struct v4l2_frequency {
+	__u32		      tuner;
+	enum v4l2_tuner_type  type;
+	__u32		      frequency;
+	__u32		      reserved[8];
+};
+
+struct v4l2_hw_freq_seek {
+	__u32		      tuner;
+	enum v4l2_tuner_type  type;
+	__u32		      seek_upward;
+	__u32		      wrap_around;
+	__u32		      spacing;
+	__u32		      reserved[7];
+};
+
+/*
+ *	R D S
+ */
+
+struct v4l2_rds_data {
+	__u8 	lsb;
+	__u8 	msb;
+	__u8 	block;
+} __attribute__ ((packed));
+
+#define V4L2_RDS_BLOCK_MSK 	 0x7
+#define V4L2_RDS_BLOCK_A 	 0
+#define V4L2_RDS_BLOCK_B 	 1
+#define V4L2_RDS_BLOCK_C 	 2
+#define V4L2_RDS_BLOCK_D 	 3
+#define V4L2_RDS_BLOCK_C_ALT 	 4
+#define V4L2_RDS_BLOCK_INVALID 	 7
+
+#define V4L2_RDS_BLOCK_CORRECTED 0x40
+#define V4L2_RDS_BLOCK_ERROR 	 0x80
+
+/*
+ *	A U D I O
+ */
+struct v4l2_audio {
+	__u32	index;
+	__u8	name[32];
+	__u32	capability;
+	__u32	mode;
+	__u32	reserved[2];
+};
+
+/*  Flags for the 'capability' field */
+#define V4L2_AUDCAP_STEREO		0x00001
+#define V4L2_AUDCAP_AVL			0x00002
+
+/*  Flags for the 'mode' field */
+#define V4L2_AUDMODE_AVL		0x00001
+
+struct v4l2_audioout {
+	__u32	index;
+	__u8	name[32];
+	__u32	capability;
+	__u32	mode;
+	__u32	reserved[2];
+};
+
+/*
+ *	M P E G   S E R V I C E S
+ *
+ *	NOTE: EXPERIMENTAL API
+ */
+#if 1
+#define V4L2_ENC_IDX_FRAME_I    (0)
+#define V4L2_ENC_IDX_FRAME_P    (1)
+#define V4L2_ENC_IDX_FRAME_B    (2)
+#define V4L2_ENC_IDX_FRAME_MASK (0xf)
+
+struct v4l2_enc_idx_entry {
+	__u64 offset;
+	__u64 pts;
+	__u32 length;
+	__u32 flags;
+	__u32 reserved[2];
+};
+
+#define V4L2_ENC_IDX_ENTRIES (64)
+struct v4l2_enc_idx {
+	__u32 entries;
+	__u32 entries_cap;
+	__u32 reserved[4];
+	struct v4l2_enc_idx_entry entry[V4L2_ENC_IDX_ENTRIES];
+};
+
+
+#define V4L2_ENC_CMD_START      (0)
+#define V4L2_ENC_CMD_STOP       (1)
+#define V4L2_ENC_CMD_PAUSE      (2)
+#define V4L2_ENC_CMD_RESUME     (3)
+
+/* Flags for V4L2_ENC_CMD_STOP */
+#define V4L2_ENC_CMD_STOP_AT_GOP_END    (1 << 0)
+
+struct v4l2_encoder_cmd {
+	__u32 cmd;
+	__u32 flags;
+	union {
+		struct {
+			__u32 data[8];
+		} raw;
+	};
+};
+
+/* Decoder commands */
+#define V4L2_DEC_CMD_START       (0)
+#define V4L2_DEC_CMD_STOP        (1)
+#define V4L2_DEC_CMD_PAUSE       (2)
+#define V4L2_DEC_CMD_RESUME      (3)
+
+/* Flags for V4L2_DEC_CMD_START */
+#define V4L2_DEC_CMD_START_MUTE_AUDIO	(1 << 0)
+
+/* Flags for V4L2_DEC_CMD_PAUSE */
+#define V4L2_DEC_CMD_PAUSE_TO_BLACK	(1 << 0)
+
+/* Flags for V4L2_DEC_CMD_STOP */
+#define V4L2_DEC_CMD_STOP_TO_BLACK	(1 << 0)
+#define V4L2_DEC_CMD_STOP_IMMEDIATELY	(1 << 1)
+
+/* Play format requirements (returned by the driver): */
+
+/* The decoder has no special format requirements */
+#define V4L2_DEC_START_FMT_NONE		(0)
+/* The decoder requires full GOPs */
+#define V4L2_DEC_START_FMT_GOP		(1)
+
+/* The structure must be zeroed before use by the application
+   This ensures it can be extended safely in the future. */
+struct v4l2_decoder_cmd {
+	__u32 cmd;
+	__u32 flags;
+	union {
+		struct {
+			__u64 pts;
+		} stop;
+
+		struct {
+			/* 0 or 1000 specifies normal speed,
+			   1 specifies forward single stepping,
+			   -1 specifies backward single stepping,
+			   >1: playback at speed/1000 of the normal speed,
+			   <-1: reverse playback at (-speed/1000) of the normal speed. */
+			__s32 speed;
+			__u32 format;
+		} start;
+
+		struct {
+			__u32 data[16];
+		} raw;
+	};
+};
+#endif
+
+
+/*
+ *	D A T A   S E R V I C E S   ( V B I )
+ *
+ *	Data services API by Michael Schimek
+ */
+
+/* Raw VBI */
+struct v4l2_vbi_format {
+	__u32	sampling_rate;		/* in 1 Hz */
+	__u32	offset;
+	__u32	samples_per_line;
+	__u32	sample_format;		/* V4L2_PIX_FMT_* */
+	__s32	start[2];
+	__u32	count[2];
+	__u32	flags;			/* V4L2_VBI_* */
+	__u32	reserved[2];		/* must be zero */
+};
+
+/*  VBI flags  */
+#define V4L2_VBI_UNSYNC		(1 << 0)
+#define V4L2_VBI_INTERLACED	(1 << 1)
+
+/* Sliced VBI
+ *
+ *    This implements is a proposal V4L2 API to allow SLICED VBI
+ * required for some hardware encoders. It should change without
+ * notice in the definitive implementation.
+ */
+
+struct v4l2_sliced_vbi_format {
+	__u16   service_set;
+	/* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
+	   service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
+				 (equals frame lines 313-336 for 625 line video
+				  standards, 263-286 for 525 line standards) */
+	__u16   service_lines[2][24];
+	__u32   io_size;
+	__u32   reserved[2];            /* must be zero */
+};
+
+/* Teletext World System Teletext
+   (WST), defined on ITU-R BT.653-2 */
+#define V4L2_SLICED_TELETEXT_B          (0x0001)
+/* Video Program System, defined on ETS 300 231*/
+#define V4L2_SLICED_VPS                 (0x0400)
+/* Closed Caption, defined on EIA-608 */
+#define V4L2_SLICED_CAPTION_525         (0x1000)
+/* Wide Screen System, defined on ITU-R BT1119.1 */
+#define V4L2_SLICED_WSS_625             (0x4000)
+
+#define V4L2_SLICED_VBI_525             (V4L2_SLICED_CAPTION_525)
+#define V4L2_SLICED_VBI_625             (V4L2_SLICED_TELETEXT_B | V4L2_SLICED_VPS | V4L2_SLICED_WSS_625)
+
+struct v4l2_sliced_vbi_cap {
+	__u16   service_set;
+	/* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
+	   service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
+				 (equals frame lines 313-336 for 625 line video
+				  standards, 263-286 for 525 line standards) */
+	__u16   service_lines[2][24];
+	enum v4l2_buf_type type;
+	__u32   reserved[3];    /* must be 0 */
+};
+
+struct v4l2_sliced_vbi_data {
+	__u32   id;
+	__u32   field;          /* 0: first field, 1: second field */
+	__u32   line;           /* 1-23 */
+	__u32   reserved;       /* must be 0 */
+	__u8    data[48];
+};
+
+/*
+ * Sliced VBI data inserted into MPEG Streams
+ */
+
+/*
+ * V4L2_MPEG_STREAM_VBI_FMT_IVTV:
+ *
+ * Structure of payload contained in an MPEG 2 Private Stream 1 PES Packet in an
+ * MPEG-2 Program Pack that contains V4L2_MPEG_STREAM_VBI_FMT_IVTV Sliced VBI
+ * data
+ *
+ * Note, the MPEG-2 Program Pack and Private Stream 1 PES packet header
+ * definitions are not included here.  See the MPEG-2 specifications for details
+ * on these headers.
+ */
+
+/* Line type IDs */
+#define V4L2_MPEG_VBI_IVTV_TELETEXT_B     (1)
+#define V4L2_MPEG_VBI_IVTV_CAPTION_525    (4)
+#define V4L2_MPEG_VBI_IVTV_WSS_625        (5)
+#define V4L2_MPEG_VBI_IVTV_VPS            (7)
+
+struct v4l2_mpeg_vbi_itv0_line {
+	__u8 id;	/* One of V4L2_MPEG_VBI_IVTV_* above */
+	__u8 data[42];	/* Sliced VBI data for the line */
+} __attribute__ ((packed));
+
+struct v4l2_mpeg_vbi_itv0 {
+	__le32 linemask[2]; /* Bitmasks of VBI service lines present */
+	struct v4l2_mpeg_vbi_itv0_line line[35];
+} __attribute__ ((packed));
+
+struct v4l2_mpeg_vbi_ITV0 {
+	struct v4l2_mpeg_vbi_itv0_line line[36];
+} __attribute__ ((packed));
+
+#define V4L2_MPEG_VBI_IVTV_MAGIC0	"itv0"
+#define V4L2_MPEG_VBI_IVTV_MAGIC1	"ITV0"
+
+struct v4l2_mpeg_vbi_fmt_ivtv {
+	__u8 magic[4];
+	union {
+		struct v4l2_mpeg_vbi_itv0 itv0;
+		struct v4l2_mpeg_vbi_ITV0 ITV0;
+	};
+} __attribute__ ((packed));
+
+/*
+ *	A G G R E G A T E   S T R U C T U R E S
+ */
+
+/**
+ * struct v4l2_plane_pix_format - additional, per-plane format definition
+ * @sizeimage:		maximum size in bytes required for data, for which
+ *			this plane will be used
+ * @bytesperline:	distance in bytes between the leftmost pixels in two
+ *			adjacent lines
+ */
+struct v4l2_plane_pix_format {
+	__u32		sizeimage;
+	__u16		bytesperline;
+	__u16		reserved[7];
+} __attribute__ ((packed));
+
+/**
+ * struct v4l2_pix_format_mplane - multiplanar format definition
+ * @width:		image width in pixels
+ * @height:		image height in pixels
+ * @pixelformat:	little endian four character code (fourcc)
+ * @field:		field order (for interlaced video)
+ * @colorspace:		supplemental to pixelformat
+ * @plane_fmt:		per-plane information
+ * @num_planes:		number of planes for this format
+ */
+struct v4l2_pix_format_mplane {
+	__u32				width;
+	__u32				height;
+	__u32				pixelformat;
+	enum v4l2_field			field;
+	enum v4l2_colorspace		colorspace;
+
+	struct v4l2_plane_pix_format	plane_fmt[VIDEO_MAX_PLANES];
+	__u8				num_planes;
+	__u8				reserved[11];
+} __attribute__ ((packed));
+
+/**
+ * struct v4l2_format - stream data format
+ * @type:	type of the data stream
+ * @pix:	definition of an image format
+ * @pix_mp:	definition of a multiplanar image format
+ * @win:	definition of an overlaid image
+ * @vbi:	raw VBI capture or output parameters
+ * @sliced:	sliced VBI capture or output parameters
+ * @raw_data:	placeholder for future extensions and custom formats
+ */
+struct v4l2_format {
+	enum v4l2_buf_type type;
+	union {
+		struct v4l2_pix_format		pix;     /* V4L2_BUF_TYPE_VIDEO_CAPTURE */
+		struct v4l2_pix_format_mplane	pix_mp;  /* V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE */
+		struct v4l2_window		win;     /* V4L2_BUF_TYPE_VIDEO_OVERLAY */
+		struct v4l2_vbi_format		vbi;     /* V4L2_BUF_TYPE_VBI_CAPTURE */
+		struct v4l2_sliced_vbi_format	sliced;  /* V4L2_BUF_TYPE_SLICED_VBI_CAPTURE */
+		__u8	raw_data[200];                   /* user-defined */
+	} fmt;
+};
+
+/*	Stream type-dependent parameters
+ */
+struct v4l2_streamparm {
+	enum v4l2_buf_type type;
+	union {
+		struct v4l2_captureparm	capture;
+		struct v4l2_outputparm	output;
+		__u8	raw_data[200];  /* user-defined */
+	} parm;
+};
+
+/*
+ *	E V E N T S
+ */
+
+#define V4L2_EVENT_ALL				0
+#define V4L2_EVENT_VSYNC			1
+#define V4L2_EVENT_EOS				2
+#define V4L2_EVENT_CTRL				3
+#define V4L2_EVENT_FRAME_SYNC			4
+#define V4L2_EVENT_PRIVATE_START		0x08000000
+
+/* Payload for V4L2_EVENT_VSYNC */
+struct v4l2_event_vsync {
+	/* Can be V4L2_FIELD_ANY, _NONE, _TOP or _BOTTOM */
+	__u8 field;
+} __attribute__ ((packed));
+
+/* Payload for V4L2_EVENT_CTRL */
+#define V4L2_EVENT_CTRL_CH_VALUE		(1 << 0)
+#define V4L2_EVENT_CTRL_CH_FLAGS		(1 << 1)
+
+struct v4l2_event_ctrl {
+	__u32 changes;
+	__u32 type;
+	union {
+		__s32 value;
+		__s64 value64;
+	};
+	__u32 flags;
+	__s32 minimum;
+	__s32 maximum;
+	__s32 step;
+	__s32 default_value;
+};
+
+struct v4l2_event_frame_sync {
+	__u32 frame_sequence;
+};
+
+struct v4l2_event {
+	__u32				type;
+	union {
+		struct v4l2_event_vsync		vsync;
+		struct v4l2_event_ctrl		ctrl;
+		struct v4l2_event_frame_sync	frame_sync;
+		__u8				data[64];
+	} u;
+	__u32				pending;
+	__u32				sequence;
+	struct timespec			timestamp;
+	__u32				id;
+	__u32				reserved[8];
+};
+
+#define V4L2_EVENT_SUB_FL_SEND_INITIAL		(1 << 0)
+#define V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK	(1 << 1)
+
+struct v4l2_event_subscription {
+	__u32				type;
+	__u32				id;
+	__u32				flags;
+	__u32				reserved[5];
+};
+
+/*
+ *	A D V A N C E D   D E B U G G I N G
+ *
+ *	NOTE: EXPERIMENTAL API, NEVER RELY ON THIS IN APPLICATIONS!
+ *	FOR DEBUGGING, TESTING AND INTERNAL USE ONLY!
+ */
+
+/* VIDIOC_DBG_G_REGISTER and VIDIOC_DBG_S_REGISTER */
+
+#define V4L2_CHIP_MATCH_HOST       0  /* Match against chip ID on host (0 for the host) */
+#define V4L2_CHIP_MATCH_I2C_DRIVER 1  /* Match against I2C driver name */
+#define V4L2_CHIP_MATCH_I2C_ADDR   2  /* Match against I2C 7-bit address */
+#define V4L2_CHIP_MATCH_AC97       3  /* Match against anciliary AC97 chip */
+
+struct v4l2_dbg_match {
+	__u32 type; /* Match type */
+	union {     /* Match this chip, meaning determined by type */
+		__u32 addr;
+		char name[32];
+	};
+} __attribute__ ((packed));
+
+struct v4l2_dbg_register {
+	struct v4l2_dbg_match match;
+	__u32 size;	/* register size in bytes */
+	__u64 reg;
+	__u64 val;
+} __attribute__ ((packed));
+
+/* VIDIOC_DBG_G_CHIP_IDENT */
+struct v4l2_dbg_chip_ident {
+	struct v4l2_dbg_match match;
+	__u32 ident;       /* chip identifier as specified in <media/v4l2-chip-ident.h> */
+	__u32 revision;    /* chip revision, chip specific */
+} __attribute__ ((packed));
+
+/**
+ * struct v4l2_create_buffers - VIDIOC_CREATE_BUFS argument
+ * @index:	on return, index of the first created buffer
+ * @count:	entry: number of requested buffers,
+ *		return: number of created buffers
+ * @memory:	buffer memory type
+ * @format:	frame format, for which buffers are requested
+ * @reserved:	future extensions
+ */
+struct v4l2_create_buffers {
+	__u32			index;
+	__u32			count;
+	enum v4l2_memory        memory;
+	struct v4l2_format	format;
+	__u32			reserved[8];
+};
+
+/*
+ *	I O C T L   C O D E S   F O R   V I D E O   D E V I C E S
+ *
+ */
+#define VIDIOC_QUERYCAP		 _IOR('V',  0, struct v4l2_capability)
+#define VIDIOC_RESERVED		  _IO('V',  1)
+#define VIDIOC_ENUM_FMT         _IOWR('V',  2, struct v4l2_fmtdesc)
+#define VIDIOC_G_FMT		_IOWR('V',  4, struct v4l2_format)
+#define VIDIOC_S_FMT		_IOWR('V',  5, struct v4l2_format)
+#define VIDIOC_REQBUFS		_IOWR('V',  8, struct v4l2_requestbuffers)
+#define VIDIOC_QUERYBUF		_IOWR('V',  9, struct v4l2_buffer)
+#define VIDIOC_G_FBUF		 _IOR('V', 10, struct v4l2_framebuffer)
+#define VIDIOC_S_FBUF		 _IOW('V', 11, struct v4l2_framebuffer)
+#define VIDIOC_OVERLAY		 _IOW('V', 14, int)
+#define VIDIOC_QBUF		_IOWR('V', 15, struct v4l2_buffer)
+#define VIDIOC_DQBUF		_IOWR('V', 17, struct v4l2_buffer)
+#define VIDIOC_STREAMON		 _IOW('V', 18, int)
+#define VIDIOC_STREAMOFF	 _IOW('V', 19, int)
+#define VIDIOC_G_PARM		_IOWR('V', 21, struct v4l2_streamparm)
+#define VIDIOC_S_PARM		_IOWR('V', 22, struct v4l2_streamparm)
+#define VIDIOC_G_STD		 _IOR('V', 23, v4l2_std_id)
+#define VIDIOC_S_STD		 _IOW('V', 24, v4l2_std_id)
+#define VIDIOC_ENUMSTD		_IOWR('V', 25, struct v4l2_standard)
+#define VIDIOC_ENUMINPUT	_IOWR('V', 26, struct v4l2_input)
+#define VIDIOC_G_CTRL		_IOWR('V', 27, struct v4l2_control)
+#define VIDIOC_S_CTRL		_IOWR('V', 28, struct v4l2_control)
+#define VIDIOC_G_TUNER		_IOWR('V', 29, struct v4l2_tuner)
+#define VIDIOC_S_TUNER		 _IOW('V', 30, struct v4l2_tuner)
+#define VIDIOC_G_AUDIO		 _IOR('V', 33, struct v4l2_audio)
+#define VIDIOC_S_AUDIO		 _IOW('V', 34, struct v4l2_audio)
+#define VIDIOC_QUERYCTRL	_IOWR('V', 36, struct v4l2_queryctrl)
+#define VIDIOC_QUERYMENU	_IOWR('V', 37, struct v4l2_querymenu)
+#define VIDIOC_G_INPUT		 _IOR('V', 38, int)
+#define VIDIOC_S_INPUT		_IOWR('V', 39, int)
+#define VIDIOC_G_OUTPUT		 _IOR('V', 46, int)
+#define VIDIOC_S_OUTPUT		_IOWR('V', 47, int)
+#define VIDIOC_ENUMOUTPUT	_IOWR('V', 48, struct v4l2_output)
+#define VIDIOC_G_AUDOUT		 _IOR('V', 49, struct v4l2_audioout)
+#define VIDIOC_S_AUDOUT		 _IOW('V', 50, struct v4l2_audioout)
+#define VIDIOC_G_MODULATOR	_IOWR('V', 54, struct v4l2_modulator)
+#define VIDIOC_S_MODULATOR	 _IOW('V', 55, struct v4l2_modulator)
+#define VIDIOC_G_FREQUENCY	_IOWR('V', 56, struct v4l2_frequency)
+#define VIDIOC_S_FREQUENCY	 _IOW('V', 57, struct v4l2_frequency)
+#define VIDIOC_CROPCAP		_IOWR('V', 58, struct v4l2_cropcap)
+#define VIDIOC_G_CROP		_IOWR('V', 59, struct v4l2_crop)
+#define VIDIOC_S_CROP		 _IOW('V', 60, struct v4l2_crop)
+#define VIDIOC_G_JPEGCOMP	 _IOR('V', 61, struct v4l2_jpegcompression)
+#define VIDIOC_S_JPEGCOMP	 _IOW('V', 62, struct v4l2_jpegcompression)
+#define VIDIOC_QUERYSTD      	 _IOR('V', 63, v4l2_std_id)
+#define VIDIOC_TRY_FMT      	_IOWR('V', 64, struct v4l2_format)
+#define VIDIOC_ENUMAUDIO	_IOWR('V', 65, struct v4l2_audio)
+#define VIDIOC_ENUMAUDOUT	_IOWR('V', 66, struct v4l2_audioout)
+#define VIDIOC_G_PRIORITY        _IOR('V', 67, enum v4l2_priority)
+#define VIDIOC_S_PRIORITY        _IOW('V', 68, enum v4l2_priority)
+#define VIDIOC_G_SLICED_VBI_CAP _IOWR('V', 69, struct v4l2_sliced_vbi_cap)
+#define VIDIOC_LOG_STATUS         _IO('V', 70)
+#define VIDIOC_G_EXT_CTRLS	_IOWR('V', 71, struct v4l2_ext_controls)
+#define VIDIOC_S_EXT_CTRLS	_IOWR('V', 72, struct v4l2_ext_controls)
+#define VIDIOC_TRY_EXT_CTRLS	_IOWR('V', 73, struct v4l2_ext_controls)
+#if 1
+#define VIDIOC_ENUM_FRAMESIZES	_IOWR('V', 74, struct v4l2_frmsizeenum)
+#define VIDIOC_ENUM_FRAMEINTERVALS _IOWR('V', 75, struct v4l2_frmivalenum)
+#define VIDIOC_G_ENC_INDEX       _IOR('V', 76, struct v4l2_enc_idx)
+#define VIDIOC_ENCODER_CMD      _IOWR('V', 77, struct v4l2_encoder_cmd)
+#define VIDIOC_TRY_ENCODER_CMD  _IOWR('V', 78, struct v4l2_encoder_cmd)
+#endif
+
+#if 1
+/* Experimental, meant for debugging, testing and internal use.
+   Only implemented if CONFIG_VIDEO_ADV_DEBUG is defined.
+   You must be root to use these ioctls. Never use these in applications! */
+#define	VIDIOC_DBG_S_REGISTER 	 _IOW('V', 79, struct v4l2_dbg_register)
+#define	VIDIOC_DBG_G_REGISTER 	_IOWR('V', 80, struct v4l2_dbg_register)
+
+/* Experimental, meant for debugging, testing and internal use.
+   Never use this ioctl in applications! */
+#define VIDIOC_DBG_G_CHIP_IDENT _IOWR('V', 81, struct v4l2_dbg_chip_ident)
+#endif
+
+#define VIDIOC_S_HW_FREQ_SEEK	 _IOW('V', 82, struct v4l2_hw_freq_seek)
+#define	VIDIOC_ENUM_DV_PRESETS	_IOWR('V', 83, struct v4l2_dv_enum_preset)
+#define	VIDIOC_S_DV_PRESET	_IOWR('V', 84, struct v4l2_dv_preset)
+#define	VIDIOC_G_DV_PRESET	_IOWR('V', 85, struct v4l2_dv_preset)
+#define	VIDIOC_QUERY_DV_PRESET	_IOR('V',  86, struct v4l2_dv_preset)
+#define	VIDIOC_S_DV_TIMINGS	_IOWR('V', 87, struct v4l2_dv_timings)
+#define	VIDIOC_G_DV_TIMINGS	_IOWR('V', 88, struct v4l2_dv_timings)
+#define	VIDIOC_DQEVENT		 _IOR('V', 89, struct v4l2_event)
+#define	VIDIOC_SUBSCRIBE_EVENT	 _IOW('V', 90, struct v4l2_event_subscription)
+#define	VIDIOC_UNSUBSCRIBE_EVENT _IOW('V', 91, struct v4l2_event_subscription)
+
+/* Experimental, the below two ioctls may change over the next couple of kernel
+   versions */
+#define VIDIOC_CREATE_BUFS	_IOWR('V', 92, struct v4l2_create_buffers)
+#define VIDIOC_PREPARE_BUF	_IOWR('V', 93, struct v4l2_buffer)
+
+/* Experimental selection API */
+#define VIDIOC_G_SELECTION	_IOWR('V', 94, struct v4l2_selection)
+#define VIDIOC_S_SELECTION	_IOWR('V', 95, struct v4l2_selection)
+
+/* Experimental, these two ioctls may change over the next couple of kernel
+   versions. */
+#define VIDIOC_DECODER_CMD	_IOWR('V', 96, struct v4l2_decoder_cmd)
+#define VIDIOC_TRY_DECODER_CMD	_IOWR('V', 97, struct v4l2_decoder_cmd)
+
+/* Reminder: when adding new ioctls please add support for them to
+   drivers/media/video/v4l2-compat-ioctl32.c as well! */
+
+#define BASE_VIDIOC_PRIVATE	192		/* 192-255 are private */
+
+#endif /* __LINUX_VIDEODEV2_H */
diff --git a/include/linux/videodev2_wmt.h b/include/linux/videodev2_wmt.h
new file mode 100755
index 00000000..53d19f51
--- /dev/null
+++ b/include/linux/videodev2_wmt.h
@@ -0,0 +1,196 @@
+#ifndef __LINUX_VIDEODEV2_WMT_H
+#define __LINUX_VIDEODEV2_WMT_H
+
+#include <linux/videodev2.h>
+
+#define WMT_V4L2_CID_CAMERA_SCENEMODE		0
+#define WMT_V4L2_CID_CAMERA_WHITEBALANCE	1
+#define WMT_V4L2_CID_CAMERA_ANTIBANDING		2
+#define WMT_V4L2_CID_CAMERA_FLASH		3
+#define WMT_V4L2_CID_CAMERA_EXPOSURE		4
+#define WMT_V4L2_CID_HFLIP			5
+#define WMT_V4L2_CID_VFLIP			6
+
+/* CID extensions */
+#define V4L2_CID_CAMERA_SCENE_MODE		(V4L2_CID_PRIVATE_BASE+0)
+enum v4l2_scene_mode {
+	SCENE_MODE_BASE = 0,
+	SCENE_MODE_AUTO = 0,
+	SCENE_MODE_NIGHTSHOT,
+	SCENE_MODE_PORTRAIT,
+	SCENE_MODE_BACK_LIGHT,
+	SCENE_MODE_LANDSCAPE,
+	SCENE_MODE_SPORTS,
+	SCENE_MODE_PARTY_INDOOR,
+	SCENE_MODE_BEACH_SNOW,
+	SCENE_MODE_SUNSET,
+	SCENE_MODE_DUSK_DAWN,
+	SCENE_MODE_FALL_COLOR,
+	SCENE_MODE_FIREWORKS,
+	SCENE_MODE_TEXT,
+	SCENE_MODE_CANDLE_LIGHT,
+	SCENE_MODE_MAX,
+};
+
+#define V4L2_CID_CAMERA_FLASH_MODE		(V4L2_CID_PRIVATE_BASE+1)
+enum v4l2_flash_mode {
+	FLASH_MODE_BASE = 0,
+	FLASH_MODE_OFF = 0,
+	FLASH_MODE_AUTO,
+	FLASH_MODE_ON,
+	FLASH_MODE_TORCH,
+	FLASH_MODE_STROBE,
+	FLASH_MODE_MAX,
+};
+
+#define V4L2_CID_CAMERA_ISO			(V4L2_CID_PRIVATE_BASE+2)
+enum v4l2_iso_mode {
+	ISO_AUTO = 0,
+	ISO_50,
+	ISO_100,
+	ISO_200,
+	ISO_400,
+	ISO_800,
+	ISO_1600,
+	ISO_SPORTS,
+	ISO_NIGHT,
+	ISO_MOVIE,
+	ISO_MAX,
+};
+
+#define V4L2_CID_CAMERA_METERING		(V4L2_CID_PRIVATE_BASE+3)
+enum v4l2_metering_mode {
+	METERING_BASE = 0,
+	METERING_MATRIX,
+	METERING_CENTER,
+	METERING_SPOT,
+	METERING_MAX,
+};
+
+#define V4L2_CID_CAMERA_WDR			(V4L2_CID_PRIVATE_BASE+4)
+enum v4l2_wdr_mode {
+	WDR_OFF,
+	WDR_ON,
+	WDR_MAX,
+};
+
+#define V4L2_CID_CAMERA_ANTI_SHAKE		(V4L2_CID_PRIVATE_BASE+5)
+enum v4l2_anti_shake_mode {
+	ANTI_SHAKE_OFF,
+	ANTI_SHAKE_STILL_ON,
+	ANTI_SHAKE_MOVIE_ON,
+	ANTI_SHAKE_MAX,
+};
+
+#define V4L2_CID_CAMERA_FOCUS_MODE		(V4L2_CID_PRIVATE_BASE+6)
+enum v4l2_focusmode {
+	FOCUS_MODE_AUTO = 0,
+	FOCUS_MODE_MACRO,
+	FOCUS_MODE_FACEDETECT,
+	FOCUS_MODE_AUTO_DEFAULT,
+	FOCUS_MODE_MACRO_DEFAULT,
+	FOCUS_MODE_FACEDETECT_DEFAULT,
+	FOCUS_MODE_INFINITY,
+	FOCUS_MODE_FIXED,
+	FOCUS_MODE_CONTINUOUS,
+	FOCUS_MODE_CONTINUOUS_PICTURE,
+	FOCUS_MODE_CONTINUOUS_PICTURE_MACRO,
+	FOCUS_MODE_CONTINUOUS_VIDEO,
+	FOCUS_MODE_TOUCH,
+	FOCUS_MODE_MAX,
+	FOCUS_MODE_DEFAULT = (1 << 8),
+};
+
+#define V4L2_CID_CAMERA_AUTO_FOCUS_RESULT	(V4L2_CID_PRIVATE_BASE+7)
+enum v4l2_focusresult {
+	FOCUS_RESULT_FOCUSING = 0,
+	FOCUS_RESULT_SUCCEED,
+	FOCUS_RESULT_FAILED,
+};
+
+#define V4L2_CID_CAMERA_FOCUS_POSITION_X	(V4L2_CID_PRIVATE_BASE+8)
+#define V4L2_CID_CAMERA_FOCUS_POSITION_Y	(V4L2_CID_PRIVATE_BASE+9)
+
+#define V4L2_CID_CAMERA_FLASH_MODE_AUTO		(V4L2_CID_PRIVATE_BASE+10)
+
+#define V4L2_CID_CAMERA_ANTI_BANDING		(V4L2_CID_PRIVATE_BASE+11)
+enum v4l2_anti_banding{
+	ANTI_BANDING_AUTO = 0,
+	ANTI_BANDING_50HZ = 1,
+	ANTI_BANDING_60HZ = 2,
+	ANTI_BANDING_OFF = 3,
+};
+
+
+// V4L2_CID_BRIGHTNESS
+enum v4l2_ev_mode {
+	EV_MINUS_4	= -4,
+	EV_MINUS_3	= -3,
+	EV_MINUS_2	= -2,
+	EV_MINUS_1	= -1,
+	EV_DEFAULT	= 0,
+	EV_PLUS_1	= 1,
+	EV_PLUS_2	= 2,
+	EV_PLUS_3	= 3,
+	EV_PLUS_4	= 4,
+	EV_MAX,
+};
+
+// V4L2_CID_DO_WHITE_BALANCE
+enum v4l2_wb_mode {
+	WHITE_BALANCE_BASE = 0,
+	WHITE_BALANCE_AUTO = 0,
+	WHITE_BALANCE_INCANDESCENCE,
+	WHITE_BALANCE_FLUORESCENT,
+	WHITE_BALANCE_DAYLIGHT,
+	WHITE_BALANCE_CLOUDY,
+	WHITE_BALANCE_TWILIGHT,
+	WHITE_BALANCE_SHADE,
+	WHITE_BALANCE_MAX,
+};
+
+// V4L2_CID_CONTRAST
+enum v4l2_contrast_mode {
+	CONTRAST_MINUS_2 = 0,
+	CONTRAST_MINUS_1,
+	CONTRAST_DEFAULT,
+	CONTRAST_PLUS_1,
+	CONTRAST_PLUS_2,
+	CONTRAST_MAX,
+};
+
+// V4L2_CID_SATURATION
+enum v4l2_saturation_mode {
+	SATURATION_MINUS_2 = 0,
+	SATURATION_MINUS_1,
+	SATURATION_DEFAULT,
+	SATURATION_PLUS_1,
+	SATURATION_PLUS_2,
+	SATURATION_MAX,
+};
+
+// V4L2_CID_SHARPNESS
+enum v4l2_sharpness_mode {
+	SHARPNESS_MINUS_2 = 0,
+	SHARPNESS_MINUS_1,
+	SHARPNESS_DEFAULT,
+	SHARPNESS_PLUS_1,
+	SHARPNESS_PLUS_2,
+	SHARPNESS_MAX,
+};
+
+// V4L2_CID_EXPOSURE
+enum v4l2_exposure_mode {
+	EXPOSURE_MINUS_4,
+	EXPOSURE_MINUS_3,
+	EXPOSURE_MINUS_2 = -2,
+	EXPOSURE_MINUS_1 = -1,
+	EXPOSURE_DEFAULT = 0,
+	EXPOSURE_PLUS_1  = 1,
+	EXPOSURE_PLUS_2  = 2,
+	EXPOSURE_PLUS_3,
+	EXPOSURE_PLUS_4,
+	EXPOSURE_MAX
+};
+
+#endif /* #ifndef __LINUX_VIDEODEV2_WMT_H */
diff --git a/include/linux/virtio.h b/include/linux/virtio.h
new file mode 100644
index 00000000..8efd28ae
--- /dev/null
+++ b/include/linux/virtio.h
@@ -0,0 +1,105 @@
+#ifndef _LINUX_VIRTIO_H
+#define _LINUX_VIRTIO_H
+/* Everything a virtio driver needs to work with any particular virtio
+ * implementation. */
+#include <linux/types.h>
+#include <linux/scatterlist.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/gfp.h>
+
+/**
+ * virtqueue - a queue to register buffers for sending or receiving.
+ * @list: the chain of virtqueues for this device
+ * @callback: the function to call when buffers are consumed (can be NULL).
+ * @name: the name of this virtqueue (mainly for debugging)
+ * @vdev: the virtio device this queue was created for.
+ * @priv: a pointer for the virtqueue implementation to use.
+ */
+struct virtqueue {
+	struct list_head list;
+	void (*callback)(struct virtqueue *vq);
+	const char *name;
+	struct virtio_device *vdev;
+	void *priv;
+};
+
+int virtqueue_add_buf(struct virtqueue *vq,
+		      struct scatterlist sg[],
+		      unsigned int out_num,
+		      unsigned int in_num,
+		      void *data,
+		      gfp_t gfp);
+
+void virtqueue_kick(struct virtqueue *vq);
+
+bool virtqueue_kick_prepare(struct virtqueue *vq);
+
+void virtqueue_notify(struct virtqueue *vq);
+
+void *virtqueue_get_buf(struct virtqueue *vq, unsigned int *len);
+
+void virtqueue_disable_cb(struct virtqueue *vq);
+
+bool virtqueue_enable_cb(struct virtqueue *vq);
+
+bool virtqueue_enable_cb_delayed(struct virtqueue *vq);
+
+void *virtqueue_detach_unused_buf(struct virtqueue *vq);
+
+unsigned int virtqueue_get_vring_size(struct virtqueue *vq);
+
+/**
+ * virtio_device - representation of a device using virtio
+ * @index: unique position on the virtio bus
+ * @dev: underlying device.
+ * @id: the device type identification (used to match it with a driver).
+ * @config: the configuration ops for this device.
+ * @vqs: the list of virtqueues for this device.
+ * @features: the features supported by both driver and device.
+ * @priv: private pointer for the driver's use.
+ */
+struct virtio_device {
+	int index;
+	struct device dev;
+	struct virtio_device_id id;
+	struct virtio_config_ops *config;
+	struct list_head vqs;
+	/* Note that this is a Linux set_bit-style bitmap. */
+	unsigned long features[1];
+	void *priv;
+};
+
+#define dev_to_virtio(dev) container_of(dev, struct virtio_device, dev)
+int register_virtio_device(struct virtio_device *dev);
+void unregister_virtio_device(struct virtio_device *dev);
+
+/**
+ * virtio_driver - operations for a virtio I/O driver
+ * @driver: underlying device driver (populate name and owner).
+ * @id_table: the ids serviced by this driver.
+ * @feature_table: an array of feature numbers supported by this driver.
+ * @feature_table_size: number of entries in the feature table array.
+ * @probe: the function to call when a device is found.  Returns 0 or -errno.
+ * @remove: the function to call when a device is removed.
+ * @config_changed: optional function to call when the device configuration
+ *    changes; may be called in interrupt context.
+ */
+struct virtio_driver {
+	struct device_driver driver;
+	const struct virtio_device_id *id_table;
+	const unsigned int *feature_table;
+	unsigned int feature_table_size;
+	int (*probe)(struct virtio_device *dev);
+	void (*remove)(struct virtio_device *dev);
+	void (*config_changed)(struct virtio_device *dev);
+#ifdef CONFIG_PM
+	int (*freeze)(struct virtio_device *dev);
+	int (*restore)(struct virtio_device *dev);
+#endif
+};
+
+int register_virtio_driver(struct virtio_driver *drv);
+void unregister_virtio_driver(struct virtio_driver *drv);
+#endif /* _LINUX_VIRTIO_H */
diff --git a/include/linux/virtio_9p.h b/include/linux/virtio_9p.h
new file mode 100644
index 00000000..277c4ad4
--- /dev/null
+++ b/include/linux/virtio_9p.h
@@ -0,0 +1,44 @@
+#ifndef _LINUX_VIRTIO_9P_H
+#define _LINUX_VIRTIO_9P_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE. */
+#include <linux/types.h>
+#include <linux/virtio_ids.h>
+#include <linux/virtio_config.h>
+
+/* The feature bitmap for virtio 9P */
+
+/* The mount point is specified in a config variable */
+#define VIRTIO_9P_MOUNT_TAG 0
+
+struct virtio_9p_config {
+	/* length of the tag name */
+	__u16 tag_len;
+	/* non-NULL terminated tag name */
+	__u8 tag[0];
+} __attribute__((packed));
+
+#endif /* _LINUX_VIRTIO_9P_H */
diff --git a/include/linux/virtio_balloon.h b/include/linux/virtio_balloon.h
new file mode 100644
index 00000000..652dc8be
--- /dev/null
+++ b/include/linux/virtio_balloon.h
@@ -0,0 +1,59 @@
+#ifndef _LINUX_VIRTIO_BALLOON_H
+#define _LINUX_VIRTIO_BALLOON_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE. */
+#include <linux/virtio_ids.h>
+#include <linux/virtio_config.h>
+
+/* The feature bitmap for virtio balloon */
+#define VIRTIO_BALLOON_F_MUST_TELL_HOST	0 /* Tell before reclaiming pages */
+#define VIRTIO_BALLOON_F_STATS_VQ	1 /* Memory Stats virtqueue */
+
+/* Size of a PFN in the balloon interface. */
+#define VIRTIO_BALLOON_PFN_SHIFT 12
+
+struct virtio_balloon_config
+{
+	/* Number of pages host wants Guest to give up. */
+	__le32 num_pages;
+	/* Number of pages we've actually got in balloon. */
+	__le32 actual;
+};
+
+#define VIRTIO_BALLOON_S_SWAP_IN  0   /* Amount of memory swapped in */
+#define VIRTIO_BALLOON_S_SWAP_OUT 1   /* Amount of memory swapped out */
+#define VIRTIO_BALLOON_S_MAJFLT   2   /* Number of major faults */
+#define VIRTIO_BALLOON_S_MINFLT   3   /* Number of minor faults */
+#define VIRTIO_BALLOON_S_MEMFREE  4   /* Total amount of free memory */
+#define VIRTIO_BALLOON_S_MEMTOT   5   /* Total amount of memory */
+#define VIRTIO_BALLOON_S_NR       6
+
+struct virtio_balloon_stat {
+	u16 tag;
+	u64 val;
+} __attribute__((packed));
+
+#endif /* _LINUX_VIRTIO_BALLOON_H */
diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h
new file mode 100644
index 00000000..e0edb40c
--- /dev/null
+++ b/include/linux/virtio_blk.h
@@ -0,0 +1,122 @@
+#ifndef _LINUX_VIRTIO_BLK_H
+#define _LINUX_VIRTIO_BLK_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE. */
+#include <linux/types.h>
+#include <linux/virtio_ids.h>
+#include <linux/virtio_config.h>
+
+/* Feature bits */
+#define VIRTIO_BLK_F_BARRIER	0	/* Does host support barriers? */
+#define VIRTIO_BLK_F_SIZE_MAX	1	/* Indicates maximum segment size */
+#define VIRTIO_BLK_F_SEG_MAX	2	/* Indicates maximum # of segments */
+#define VIRTIO_BLK_F_GEOMETRY	4	/* Legacy geometry available  */
+#define VIRTIO_BLK_F_RO		5	/* Disk is read-only */
+#define VIRTIO_BLK_F_BLK_SIZE	6	/* Block size of disk is available*/
+#define VIRTIO_BLK_F_SCSI	7	/* Supports scsi command passthru */
+#define VIRTIO_BLK_F_FLUSH	9	/* Cache flush command support */
+#define VIRTIO_BLK_F_TOPOLOGY	10	/* Topology information is available */
+
+#define VIRTIO_BLK_ID_BYTES	20	/* ID string length */
+
+struct virtio_blk_config {
+	/* The capacity (in 512-byte sectors). */
+	__u64 capacity;
+	/* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */
+	__u32 size_max;
+	/* The maximum number of segments (if VIRTIO_BLK_F_SEG_MAX) */
+	__u32 seg_max;
+	/* geometry the device (if VIRTIO_BLK_F_GEOMETRY) */
+	struct virtio_blk_geometry {
+		__u16 cylinders;
+		__u8 heads;
+		__u8 sectors;
+	} geometry;
+
+	/* block size of device (if VIRTIO_BLK_F_BLK_SIZE) */
+	__u32 blk_size;
+
+	/* the next 4 entries are guarded by VIRTIO_BLK_F_TOPOLOGY  */
+	/* exponent for physical block per logical block. */
+	__u8 physical_block_exp;
+	/* alignment offset in logical blocks. */
+	__u8 alignment_offset;
+	/* minimum I/O size without performance penalty in logical blocks. */
+	__u16 min_io_size;
+	/* optimal sustained I/O size in logical blocks. */
+	__u32 opt_io_size;
+
+} __attribute__((packed));
+
+/*
+ * Command types
+ *
+ * Usage is a bit tricky as some bits are used as flags and some are not.
+ *
+ * Rules:
+ *   VIRTIO_BLK_T_OUT may be combined with VIRTIO_BLK_T_SCSI_CMD or
+ *   VIRTIO_BLK_T_BARRIER.  VIRTIO_BLK_T_FLUSH is a command of its own
+ *   and may not be combined with any of the other flags.
+ */
+
+/* These two define direction. */
+#define VIRTIO_BLK_T_IN		0
+#define VIRTIO_BLK_T_OUT	1
+
+/* This bit says it's a scsi command, not an actual read or write. */
+#define VIRTIO_BLK_T_SCSI_CMD	2
+
+/* Cache flush command */
+#define VIRTIO_BLK_T_FLUSH	4
+
+/* Get device ID command */
+#define VIRTIO_BLK_T_GET_ID    8
+
+/* Barrier before this op. */
+#define VIRTIO_BLK_T_BARRIER	0x80000000
+
+/* This is the first element of the read scatter-gather list. */
+struct virtio_blk_outhdr {
+	/* VIRTIO_BLK_T* */
+	__u32 type;
+	/* io priority. */
+	__u32 ioprio;
+	/* Sector (ie. 512 byte offset) */
+	__u64 sector;
+};
+
+struct virtio_scsi_inhdr {
+	__u32 errors;
+	__u32 data_len;
+	__u32 sense_len;
+	__u32 residual;
+};
+
+/* And this is the final byte of the write scatter-gather list. */
+#define VIRTIO_BLK_S_OK		0
+#define VIRTIO_BLK_S_IOERR	1
+#define VIRTIO_BLK_S_UNSUPP	2
+#endif /* _LINUX_VIRTIO_BLK_H */
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
new file mode 100644
index 00000000..7323a339
--- /dev/null
+++ b/include/linux/virtio_config.h
@@ -0,0 +1,203 @@
+#ifndef _LINUX_VIRTIO_CONFIG_H
+#define _LINUX_VIRTIO_CONFIG_H
+/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
+ * anyone can use the definitions to implement compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE. */
+
+/* Virtio devices use a standardized configuration space to define their
+ * features and pass configuration information, but each implementation can
+ * store and access that space differently. */
+#include <linux/types.h>
+
+/* Status byte for guest to report progress, and synchronize features. */
+/* We have seen device and processed generic fields (VIRTIO_CONFIG_F_VIRTIO) */
+#define VIRTIO_CONFIG_S_ACKNOWLEDGE	1
+/* We have found a driver for the device. */
+#define VIRTIO_CONFIG_S_DRIVER		2
+/* Driver has used its parts of the config, and is happy */
+#define VIRTIO_CONFIG_S_DRIVER_OK	4
+/* We've given up on this device. */
+#define VIRTIO_CONFIG_S_FAILED		0x80
+
+/* Some virtio feature bits (currently bits 28 through 31) are reserved for the
+ * transport being used (eg. virtio_ring), the rest are per-device feature
+ * bits. */
+#define VIRTIO_TRANSPORT_F_START	28
+#define VIRTIO_TRANSPORT_F_END		32
+
+/* Do we get callbacks when the ring is completely used, even if we've
+ * suppressed them? */
+#define VIRTIO_F_NOTIFY_ON_EMPTY	24
+
+#ifdef __KERNEL__
+#include <linux/err.h>
+#include <linux/bug.h>
+#include <linux/virtio.h>
+
+/**
+ * virtio_config_ops - operations for configuring a virtio device
+ * @get: read the value of a configuration field
+ *	vdev: the virtio_device
+ *	offset: the offset of the configuration field
+ *	buf: the buffer to write the field value into.
+ *	len: the length of the buffer
+ * @set: write the value of a configuration field
+ *	vdev: the virtio_device
+ *	offset: the offset of the configuration field
+ *	buf: the buffer to read the field value from.
+ *	len: the length of the buffer
+ * @get_status: read the status byte
+ *	vdev: the virtio_device
+ *	Returns the status byte
+ * @set_status: write the status byte
+ *	vdev: the virtio_device
+ *	status: the new status byte
+ * @request_vqs: request the specified number of virtqueues
+ *	vdev: the virtio_device
+ *	max_vqs: the max number of virtqueues we want
+ *      If supplied, must call before any virtqueues are instantiated.
+ *      To modify the max number of virtqueues after request_vqs has been
+ *      called, call free_vqs and then request_vqs with a new value.
+ * @free_vqs: cleanup resources allocated by request_vqs
+ *	vdev: the virtio_device
+ *      If supplied, must call after all virtqueues have been deleted.
+ * @reset: reset the device
+ *	vdev: the virtio device
+ *	After this, status and feature negotiation must be done again
+ *	Device must not be reset from its vq/config callbacks, or in
+ *	parallel with being added/removed.
+ * @find_vqs: find virtqueues and instantiate them.
+ *	vdev: the virtio_device
+ *	nvqs: the number of virtqueues to find
+ *	vqs: on success, includes new virtqueues
+ *	callbacks: array of callbacks, for each virtqueue
+ *	names: array of virtqueue names (mainly for debugging)
+ *	Returns 0 on success or error status
+ * @del_vqs: free virtqueues found by find_vqs().
+ * @get_features: get the array of feature bits for this device.
+ *	vdev: the virtio_device
+ *	Returns the first 32 feature bits (all we currently need).
+ * @finalize_features: confirm what device features we'll be using.
+ *	vdev: the virtio_device
+ *	This gives the final feature bits for the device: it can change
+ *	the dev->feature bits if it wants.
+ * @bus_name: return the bus name associated with the device
+ *	vdev: the virtio_device
+ *      This returns a pointer to the bus name a la pci_name from which
+ *      the caller can then copy.
+ */
+typedef void vq_callback_t(struct virtqueue *);
+struct virtio_config_ops {
+	void (*get)(struct virtio_device *vdev, unsigned offset,
+		    void *buf, unsigned len);
+	void (*set)(struct virtio_device *vdev, unsigned offset,
+		    const void *buf, unsigned len);
+	u8 (*get_status)(struct virtio_device *vdev);
+	void (*set_status)(struct virtio_device *vdev, u8 status);
+	void (*reset)(struct virtio_device *vdev);
+	int (*find_vqs)(struct virtio_device *, unsigned nvqs,
+			struct virtqueue *vqs[],
+			vq_callback_t *callbacks[],
+			const char *names[]);
+	void (*del_vqs)(struct virtio_device *);
+	u32 (*get_features)(struct virtio_device *vdev);
+	void (*finalize_features)(struct virtio_device *vdev);
+	const char *(*bus_name)(struct virtio_device *vdev);
+};
+
+/* If driver didn't advertise the feature, it will never appear. */
+void virtio_check_driver_offered_feature(const struct virtio_device *vdev,
+					 unsigned int fbit);
+
+/**
+ * virtio_has_feature - helper to determine if this device has this feature.
+ * @vdev: the device
+ * @fbit: the feature bit
+ */
+static inline bool virtio_has_feature(const struct virtio_device *vdev,
+				      unsigned int fbit)
+{
+	/* Did you forget to fix assumptions on max features? */
+	if (__builtin_constant_p(fbit))
+		BUILD_BUG_ON(fbit >= 32);
+	else
+		BUG_ON(fbit >= 32);
+
+	if (fbit < VIRTIO_TRANSPORT_F_START)
+		virtio_check_driver_offered_feature(vdev, fbit);
+
+	return test_bit(fbit, vdev->features);
+}
+
+/**
+ * virtio_config_val - look for a feature and get a virtio config entry.
+ * @vdev: the virtio device
+ * @fbit: the feature bit
+ * @offset: the type to search for.
+ * @val: a pointer to the value to fill in.
+ *
+ * The return value is -ENOENT if the feature doesn't exist.  Otherwise
+ * the config value is copied into whatever is pointed to by v. */
+#define virtio_config_val(vdev, fbit, offset, v) \
+	virtio_config_buf((vdev), (fbit), (offset), (v), sizeof(*v))
+
+#define virtio_config_val_len(vdev, fbit, offset, v, len) \
+	virtio_config_buf((vdev), (fbit), (offset), (v), (len))
+
+static inline int virtio_config_buf(struct virtio_device *vdev,
+				    unsigned int fbit,
+				    unsigned int offset,
+				    void *buf, unsigned len)
+{
+	if (!virtio_has_feature(vdev, fbit))
+		return -ENOENT;
+
+	vdev->config->get(vdev, offset, buf, len);
+	return 0;
+}
+
+static inline
+struct virtqueue *virtio_find_single_vq(struct virtio_device *vdev,
+					vq_callback_t *c, const char *n)
+{
+	vq_callback_t *callbacks[] = { c };
+	const char *names[] = { n };
+	struct virtqueue *vq;
+	int err = vdev->config->find_vqs(vdev, 1, &vq, callbacks, names);
+	if (err < 0)
+		return ERR_PTR(err);
+	return vq;
+}
+
+static inline
+const char *virtio_bus_name(struct virtio_device *vdev)
+{
+	if (!vdev->config->bus_name)
+		return "virtio";
+	return vdev->config->bus_name(vdev);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_VIRTIO_CONFIG_H */
diff --git a/include/linux/virtio_console.h b/include/linux/virtio_console.h
new file mode 100644
index 00000000..bdf4b003
--- /dev/null
+++ b/include/linux/virtio_console.h
@@ -0,0 +1,77 @@
+#ifndef _LINUX_VIRTIO_CONSOLE_H
+#define _LINUX_VIRTIO_CONSOLE_H
+#include <linux/types.h>
+#include <linux/virtio_ids.h>
+#include <linux/virtio_config.h>
+/*
+ * This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
+ * anyone can use the definitions to implement compatible drivers/servers:
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Copyright (C) Red Hat, Inc., 2009, 2010, 2011
+ * Copyright (C) Amit Shah <amit.shah@redhat.com>, 2009, 2010, 2011
+ */
+
+/* Feature bits */
+#define VIRTIO_CONSOLE_F_SIZE	0	/* Does host provide console size? */
+#define VIRTIO_CONSOLE_F_MULTIPORT 1	/* Does host provide multiple ports? */
+
+#define VIRTIO_CONSOLE_BAD_ID		(~(u32)0)
+
+struct virtio_console_config {
+	/* colums of the screens */
+	__u16 cols;
+	/* rows of the screens */
+	__u16 rows;
+	/* max. number of ports this device can hold */
+	__u32 max_nr_ports;
+} __attribute__((packed));
+
+/*
+ * A message that's passed between the Host and the Guest for a
+ * particular port.
+ */
+struct virtio_console_control {
+	__u32 id;		/* Port number */
+	__u16 event;		/* The kind of control event (see below) */
+	__u16 value;		/* Extra information for the key */
+};
+
+/* Some events for control messages */
+#define VIRTIO_CONSOLE_DEVICE_READY	0
+#define VIRTIO_CONSOLE_PORT_ADD		1
+#define VIRTIO_CONSOLE_PORT_REMOVE	2
+#define VIRTIO_CONSOLE_PORT_READY	3
+#define VIRTIO_CONSOLE_CONSOLE_PORT	4
+#define VIRTIO_CONSOLE_RESIZE		5
+#define VIRTIO_CONSOLE_PORT_OPEN	6
+#define VIRTIO_CONSOLE_PORT_NAME	7
+
+#ifdef __KERNEL__
+int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int));
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_VIRTIO_CONSOLE_H */
diff --git a/include/linux/virtio_ids.h b/include/linux/virtio_ids.h
new file mode 100644
index 00000000..7529b854
--- /dev/null
+++ b/include/linux/virtio_ids.h
@@ -0,0 +1,41 @@
+#ifndef _LINUX_VIRTIO_IDS_H
+#define _LINUX_VIRTIO_IDS_H
+/*
+ * Virtio IDs
+ *
+ * This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE. */
+
+#define VIRTIO_ID_NET		1 /* virtio net */
+#define VIRTIO_ID_BLOCK		2 /* virtio block */
+#define VIRTIO_ID_CONSOLE	3 /* virtio console */
+#define VIRTIO_ID_RNG		4 /* virtio ring */
+#define VIRTIO_ID_BALLOON	5 /* virtio balloon */
+#define VIRTIO_ID_RPMSG		7 /* virtio remote processor messaging */
+#define VIRTIO_ID_SCSI		8 /* virtio scsi */
+#define VIRTIO_ID_9P		9 /* 9p virtio console */
+
+#endif /* _LINUX_VIRTIO_IDS_H */
diff --git a/include/linux/virtio_mmio.h b/include/linux/virtio_mmio.h
new file mode 100644
index 00000000..5c7b6f0d
--- /dev/null
+++ b/include/linux/virtio_mmio.h
@@ -0,0 +1,111 @@
+/*
+ * Virtio platform device driver
+ *
+ * Copyright 2011, ARM Ltd.
+ *
+ * Based on Virtio PCI driver by Anthony Liguori, copyright IBM Corp. 2007
+ *
+ * This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef _LINUX_VIRTIO_MMIO_H
+#define _LINUX_VIRTIO_MMIO_H
+
+/*
+ * Control registers
+ */
+
+/* Magic value ("virt" string) - Read Only */
+#define VIRTIO_MMIO_MAGIC_VALUE		0x000
+
+/* Virtio device version - Read Only */
+#define VIRTIO_MMIO_VERSION		0x004
+
+/* Virtio device ID - Read Only */
+#define VIRTIO_MMIO_DEVICE_ID		0x008
+
+/* Virtio vendor ID - Read Only */
+#define VIRTIO_MMIO_VENDOR_ID		0x00c
+
+/* Bitmask of the features supported by the host
+ * (32 bits per set) - Read Only */
+#define VIRTIO_MMIO_HOST_FEATURES	0x010
+
+/* Host features set selector - Write Only */
+#define VIRTIO_MMIO_HOST_FEATURES_SEL	0x014
+
+/* Bitmask of features activated by the guest
+ * (32 bits per set) - Write Only */
+#define VIRTIO_MMIO_GUEST_FEATURES	0x020
+
+/* Activated features set selector - Write Only */
+#define VIRTIO_MMIO_GUEST_FEATURES_SEL	0x024
+
+/* Guest's memory page size in bytes - Write Only */
+#define VIRTIO_MMIO_GUEST_PAGE_SIZE	0x028
+
+/* Queue selector - Write Only */
+#define VIRTIO_MMIO_QUEUE_SEL		0x030
+
+/* Maximum size of the currently selected queue - Read Only */
+#define VIRTIO_MMIO_QUEUE_NUM_MAX	0x034
+
+/* Queue size for the currently selected queue - Write Only */
+#define VIRTIO_MMIO_QUEUE_NUM		0x038
+
+/* Used Ring alignment for the currently selected queue - Write Only */
+#define VIRTIO_MMIO_QUEUE_ALIGN		0x03c
+
+/* Guest's PFN for the currently selected queue - Read Write */
+#define VIRTIO_MMIO_QUEUE_PFN		0x040
+
+/* Queue notifier - Write Only */
+#define VIRTIO_MMIO_QUEUE_NOTIFY	0x050
+
+/* Interrupt status - Read Only */
+#define VIRTIO_MMIO_INTERRUPT_STATUS	0x060
+
+/* Interrupt acknowledge - Write Only */
+#define VIRTIO_MMIO_INTERRUPT_ACK	0x064
+
+/* Device status register - Read Write */
+#define VIRTIO_MMIO_STATUS		0x070
+
+/* The config space is defined by each driver as
+ * the per-driver configuration space - Read Write */
+#define VIRTIO_MMIO_CONFIG		0x100
+
+
+
+/*
+ * Interrupt flags (re: interrupt status & acknowledge registers)
+ */
+
+#define VIRTIO_MMIO_INT_VRING		(1 << 0)
+#define VIRTIO_MMIO_INT_CONFIG		(1 << 1)
+
+#endif
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
new file mode 100644
index 00000000..970d5a2a
--- /dev/null
+++ b/include/linux/virtio_net.h
@@ -0,0 +1,155 @@
+#ifndef _LINUX_VIRTIO_NET_H
+#define _LINUX_VIRTIO_NET_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE. */
+#include <linux/types.h>
+#include <linux/virtio_ids.h>
+#include <linux/virtio_config.h>
+#include <linux/if_ether.h>
+
+/* The feature bitmap for virtio net */
+#define VIRTIO_NET_F_CSUM	0	/* Host handles pkts w/ partial csum */
+#define VIRTIO_NET_F_GUEST_CSUM	1	/* Guest handles pkts w/ partial csum */
+#define VIRTIO_NET_F_MAC	5	/* Host has given MAC address. */
+#define VIRTIO_NET_F_GSO	6	/* Host handles pkts w/ any GSO type */
+#define VIRTIO_NET_F_GUEST_TSO4	7	/* Guest can handle TSOv4 in. */
+#define VIRTIO_NET_F_GUEST_TSO6	8	/* Guest can handle TSOv6 in. */
+#define VIRTIO_NET_F_GUEST_ECN	9	/* Guest can handle TSO[6] w/ ECN in. */
+#define VIRTIO_NET_F_GUEST_UFO	10	/* Guest can handle UFO in. */
+#define VIRTIO_NET_F_HOST_TSO4	11	/* Host can handle TSOv4 in. */
+#define VIRTIO_NET_F_HOST_TSO6	12	/* Host can handle TSOv6 in. */
+#define VIRTIO_NET_F_HOST_ECN	13	/* Host can handle TSO[6] w/ ECN in. */
+#define VIRTIO_NET_F_HOST_UFO	14	/* Host can handle UFO in. */
+#define VIRTIO_NET_F_MRG_RXBUF	15	/* Host can merge receive buffers. */
+#define VIRTIO_NET_F_STATUS	16	/* virtio_net_config.status available */
+#define VIRTIO_NET_F_CTRL_VQ	17	/* Control channel available */
+#define VIRTIO_NET_F_CTRL_RX	18	/* Control channel RX mode support */
+#define VIRTIO_NET_F_CTRL_VLAN	19	/* Control channel VLAN filtering */
+#define VIRTIO_NET_F_CTRL_RX_EXTRA 20	/* Extra RX mode control support */
+
+#define VIRTIO_NET_S_LINK_UP	1	/* Link is up */
+
+struct virtio_net_config {
+	/* The config defining mac address (if VIRTIO_NET_F_MAC) */
+	__u8 mac[6];
+	/* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
+	__u16 status;
+} __attribute__((packed));
+
+/* This is the first element of the scatter-gather list.  If you don't
+ * specify GSO or CSUM features, you can simply ignore the header. */
+struct virtio_net_hdr {
+#define VIRTIO_NET_HDR_F_NEEDS_CSUM	1	// Use csum_start, csum_offset
+#define VIRTIO_NET_HDR_F_DATA_VALID	2	// Csum is valid
+	__u8 flags;
+#define VIRTIO_NET_HDR_GSO_NONE		0	// Not a GSO frame
+#define VIRTIO_NET_HDR_GSO_TCPV4	1	// GSO frame, IPv4 TCP (TSO)
+#define VIRTIO_NET_HDR_GSO_UDP		3	// GSO frame, IPv4 UDP (UFO)
+#define VIRTIO_NET_HDR_GSO_TCPV6	4	// GSO frame, IPv6 TCP
+#define VIRTIO_NET_HDR_GSO_ECN		0x80	// TCP has ECN set
+	__u8 gso_type;
+	__u16 hdr_len;		/* Ethernet + IP + tcp/udp hdrs */
+	__u16 gso_size;		/* Bytes to append to hdr_len per frame */
+	__u16 csum_start;	/* Position to start checksumming from */
+	__u16 csum_offset;	/* Offset after that to place checksum */
+};
+
+/* This is the version of the header to use when the MRG_RXBUF
+ * feature has been negotiated. */
+struct virtio_net_hdr_mrg_rxbuf {
+	struct virtio_net_hdr hdr;
+	__u16 num_buffers;	/* Number of merged rx buffers */
+};
+
+/*
+ * Control virtqueue data structures
+ *
+ * The control virtqueue expects a header in the first sg entry
+ * and an ack/status response in the last entry.  Data for the
+ * command goes in between.
+ */
+struct virtio_net_ctrl_hdr {
+	__u8 class;
+	__u8 cmd;
+} __attribute__((packed));
+
+typedef __u8 virtio_net_ctrl_ack;
+
+#define VIRTIO_NET_OK     0
+#define VIRTIO_NET_ERR    1
+
+/*
+ * Control the RX mode, ie. promisucous, allmulti, etc...
+ * All commands require an "out" sg entry containing a 1 byte
+ * state value, zero = disable, non-zero = enable.  Commands
+ * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
+ * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
+ */
+#define VIRTIO_NET_CTRL_RX    0
+ #define VIRTIO_NET_CTRL_RX_PROMISC      0
+ #define VIRTIO_NET_CTRL_RX_ALLMULTI     1
+ #define VIRTIO_NET_CTRL_RX_ALLUNI       2
+ #define VIRTIO_NET_CTRL_RX_NOMULTI      3
+ #define VIRTIO_NET_CTRL_RX_NOUNI        4
+ #define VIRTIO_NET_CTRL_RX_NOBCAST      5
+
+/*
+ * Control the MAC filter table.
+ *
+ * The MAC filter table is managed by the hypervisor, the guest should
+ * assume the size is infinite.  Filtering should be considered
+ * non-perfect, ie. based on hypervisor resources, the guest may
+ * received packets from sources not specified in the filter list.
+ *
+ * In addition to the class/cmd header, the TABLE_SET command requires
+ * two out scatterlists.  Each contains a 4 byte count of entries followed
+ * by a concatenated byte stream of the ETH_ALEN MAC addresses.  The
+ * first sg list contains unicast addresses, the second is for multicast.
+ * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
+ * is available.
+ */
+struct virtio_net_ctrl_mac {
+	__u32 entries;
+	__u8 macs[][ETH_ALEN];
+} __attribute__((packed));
+
+#define VIRTIO_NET_CTRL_MAC    1
+ #define VIRTIO_NET_CTRL_MAC_TABLE_SET        0
+
+/*
+ * Control VLAN filtering
+ *
+ * The VLAN filter table is controlled via a simple ADD/DEL interface.
+ * VLAN IDs not added may be filterd by the hypervisor.  Del is the
+ * opposite of add.  Both commands expect an out entry containing a 2
+ * byte VLAN ID.  VLAN filterting is available with the
+ * VIRTIO_NET_F_CTRL_VLAN feature bit.
+ */
+#define VIRTIO_NET_CTRL_VLAN       2
+ #define VIRTIO_NET_CTRL_VLAN_ADD             0
+ #define VIRTIO_NET_CTRL_VLAN_DEL             1
+
+#endif /* _LINUX_VIRTIO_NET_H */
diff --git a/include/linux/virtio_pci.h b/include/linux/virtio_pci.h
new file mode 100644
index 00000000..ea66f3f6
--- /dev/null
+++ b/include/linux/virtio_pci.h
@@ -0,0 +1,95 @@
+/*
+ * Virtio PCI driver
+ *
+ * This module allows virtio devices to be used over a virtual PCI device.
+ * This can be used with QEMU based VMMs like KVM or Xen.
+ *
+ * Copyright IBM Corp. 2007
+ *
+ * Authors:
+ *  Anthony Liguori  <aliguori@us.ibm.com>
+ *
+ * This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef _LINUX_VIRTIO_PCI_H
+#define _LINUX_VIRTIO_PCI_H
+
+#include <linux/virtio_config.h>
+
+/* A 32-bit r/o bitmask of the features supported by the host */
+#define VIRTIO_PCI_HOST_FEATURES	0
+
+/* A 32-bit r/w bitmask of features activated by the guest */
+#define VIRTIO_PCI_GUEST_FEATURES	4
+
+/* A 32-bit r/w PFN for the currently selected queue */
+#define VIRTIO_PCI_QUEUE_PFN		8
+
+/* A 16-bit r/o queue size for the currently selected queue */
+#define VIRTIO_PCI_QUEUE_NUM		12
+
+/* A 16-bit r/w queue selector */
+#define VIRTIO_PCI_QUEUE_SEL		14
+
+/* A 16-bit r/w queue notifier */
+#define VIRTIO_PCI_QUEUE_NOTIFY		16
+
+/* An 8-bit device status register.  */
+#define VIRTIO_PCI_STATUS		18
+
+/* An 8-bit r/o interrupt status register.  Reading the value will return the
+ * current contents of the ISR and will also clear it.  This is effectively
+ * a read-and-acknowledge. */
+#define VIRTIO_PCI_ISR			19
+
+/* The bit of the ISR which indicates a device configuration change. */
+#define VIRTIO_PCI_ISR_CONFIG		0x2
+
+/* MSI-X registers: only enabled if MSI-X is enabled. */
+/* A 16-bit vector for configuration changes. */
+#define VIRTIO_MSI_CONFIG_VECTOR        20
+/* A 16-bit vector for selected queue notifications. */
+#define VIRTIO_MSI_QUEUE_VECTOR         22
+/* Vector value used to disable MSI for queue */
+#define VIRTIO_MSI_NO_VECTOR            0xffff
+
+/* The remaining space is defined by each driver as the per-driver
+ * configuration space */
+#define VIRTIO_PCI_CONFIG(dev)		((dev)->msix_enabled ? 24 : 20)
+
+/* Virtio ABI version, this must match exactly */
+#define VIRTIO_PCI_ABI_VERSION		0
+
+/* How many bits to shift physical queue address written to QUEUE_PFN.
+ * 12 is historical, and due to x86 page size. */
+#define VIRTIO_PCI_QUEUE_ADDR_SHIFT	12
+
+/* The alignment to use between consumer and producer parts of vring.
+ * x86 pagesize again. */
+#define VIRTIO_PCI_VRING_ALIGN		4096
+#endif
diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h
new file mode 100644
index 00000000..e338730c
--- /dev/null
+++ b/include/linux/virtio_ring.h
@@ -0,0 +1,182 @@
+#ifndef _LINUX_VIRTIO_RING_H
+#define _LINUX_VIRTIO_RING_H
+/* An interface for efficient virtio implementation, currently for use by KVM
+ * and lguest, but hopefully others soon.  Do NOT change this since it will
+ * break existing servers and clients.
+ *
+ * This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Copyright Rusty Russell IBM Corporation 2007. */
+#include <linux/types.h>
+
+/* This marks a buffer as continuing via the next field. */
+#define VRING_DESC_F_NEXT	1
+/* This marks a buffer as write-only (otherwise read-only). */
+#define VRING_DESC_F_WRITE	2
+/* This means the buffer contains a list of buffer descriptors. */
+#define VRING_DESC_F_INDIRECT	4
+
+/* The Host uses this in used->flags to advise the Guest: don't kick me when
+ * you add a buffer.  It's unreliable, so it's simply an optimization.  Guest
+ * will still kick if it's out of buffers. */
+#define VRING_USED_F_NO_NOTIFY	1
+/* The Guest uses this in avail->flags to advise the Host: don't interrupt me
+ * when you consume a buffer.  It's unreliable, so it's simply an
+ * optimization.  */
+#define VRING_AVAIL_F_NO_INTERRUPT	1
+
+/* We support indirect buffer descriptors */
+#define VIRTIO_RING_F_INDIRECT_DESC	28
+
+/* The Guest publishes the used index for which it expects an interrupt
+ * at the end of the avail ring. Host should ignore the avail->flags field. */
+/* The Host publishes the avail index for which it expects a kick
+ * at the end of the used ring. Guest should ignore the used->flags field. */
+#define VIRTIO_RING_F_EVENT_IDX		29
+
+/* Virtio ring descriptors: 16 bytes.  These can chain together via "next". */
+struct vring_desc {
+	/* Address (guest-physical). */
+	__u64 addr;
+	/* Length. */
+	__u32 len;
+	/* The flags as indicated above. */
+	__u16 flags;
+	/* We chain unused descriptors via this, too */
+	__u16 next;
+};
+
+struct vring_avail {
+	__u16 flags;
+	__u16 idx;
+	__u16 ring[];
+};
+
+/* u32 is used here for ids for padding reasons. */
+struct vring_used_elem {
+	/* Index of start of used descriptor chain. */
+	__u32 id;
+	/* Total length of the descriptor chain which was used (written to) */
+	__u32 len;
+};
+
+struct vring_used {
+	__u16 flags;
+	__u16 idx;
+	struct vring_used_elem ring[];
+};
+
+struct vring {
+	unsigned int num;
+
+	struct vring_desc *desc;
+
+	struct vring_avail *avail;
+
+	struct vring_used *used;
+};
+
+/* The standard layout for the ring is a continuous chunk of memory which looks
+ * like this.  We assume num is a power of 2.
+ *
+ * struct vring
+ * {
+ *	// The actual descriptors (16 bytes each)
+ *	struct vring_desc desc[num];
+ *
+ *	// A ring of available descriptor heads with free-running index.
+ *	__u16 avail_flags;
+ *	__u16 avail_idx;
+ *	__u16 available[num];
+ *	__u16 used_event_idx;
+ *
+ *	// Padding to the next align boundary.
+ *	char pad[];
+ *
+ *	// A ring of used descriptor heads with free-running index.
+ *	__u16 used_flags;
+ *	__u16 used_idx;
+ *	struct vring_used_elem used[num];
+ *	__u16 avail_event_idx;
+ * };
+ */
+/* We publish the used event index at the end of the available ring, and vice
+ * versa. They are at the end for backwards compatibility. */
+#define vring_used_event(vr) ((vr)->avail->ring[(vr)->num])
+#define vring_avail_event(vr) (*(__u16 *)&(vr)->used->ring[(vr)->num])
+
+static inline void vring_init(struct vring *vr, unsigned int num, void *p,
+			      unsigned long align)
+{
+	vr->num = num;
+	vr->desc = p;
+	vr->avail = p + num*sizeof(struct vring_desc);
+	vr->used = (void *)(((unsigned long)&vr->avail->ring[num] + sizeof(__u16)
+		+ align-1) & ~(align - 1));
+}
+
+static inline unsigned vring_size(unsigned int num, unsigned long align)
+{
+	return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (3 + num)
+		 + align - 1) & ~(align - 1))
+		+ sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num;
+}
+
+/* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */
+/* Assuming a given event_idx value from the other size, if
+ * we have just incremented index from old to new_idx,
+ * should we trigger an event? */
+static inline int vring_need_event(__u16 event_idx, __u16 new_idx, __u16 old)
+{
+	/* Note: Xen has similar logic for notification hold-off
+	 * in include/xen/interface/io/ring.h with req_event and req_prod
+	 * corresponding to event_idx + 1 and new_idx respectively.
+	 * Note also that req_event and req_prod in Xen start at 1,
+	 * event indexes in virtio start at 0. */
+	return (__u16)(new_idx - event_idx - 1) < (__u16)(new_idx - old);
+}
+
+#ifdef __KERNEL__
+#include <linux/irqreturn.h>
+struct virtio_device;
+struct virtqueue;
+
+struct virtqueue *vring_new_virtqueue(unsigned int num,
+				      unsigned int vring_align,
+				      struct virtio_device *vdev,
+				      bool weak_barriers,
+				      void *pages,
+				      void (*notify)(struct virtqueue *vq),
+				      void (*callback)(struct virtqueue *vq),
+				      const char *name);
+void vring_del_virtqueue(struct virtqueue *vq);
+/* Filter out transport-specific feature bits. */
+void vring_transport_features(struct virtio_device *vdev);
+
+irqreturn_t vring_interrupt(int irq, void *_vq);
+#endif /* __KERNEL__ */
+#endif /* _LINUX_VIRTIO_RING_H */
diff --git a/include/linux/virtio_rng.h b/include/linux/virtio_rng.h
new file mode 100644
index 00000000..c4d5de89
--- /dev/null
+++ b/include/linux/virtio_rng.h
@@ -0,0 +1,8 @@
+#ifndef _LINUX_VIRTIO_RNG_H
+#define _LINUX_VIRTIO_RNG_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers. */
+#include <linux/virtio_ids.h>
+#include <linux/virtio_config.h>
+
+#endif /* _LINUX_VIRTIO_RNG_H */
diff --git a/include/linux/virtio_scsi.h b/include/linux/virtio_scsi.h
new file mode 100644
index 00000000..8ddeafdc
--- /dev/null
+++ b/include/linux/virtio_scsi.h
@@ -0,0 +1,114 @@
+#ifndef _LINUX_VIRTIO_SCSI_H
+#define _LINUX_VIRTIO_SCSI_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers. */
+
+#define VIRTIO_SCSI_CDB_SIZE   32
+#define VIRTIO_SCSI_SENSE_SIZE 96
+
+/* SCSI command request, followed by data-out */
+struct virtio_scsi_cmd_req {
+	u8 lun[8];		/* Logical Unit Number */
+	u64 tag;		/* Command identifier */
+	u8 task_attr;		/* Task attribute */
+	u8 prio;
+	u8 crn;
+	u8 cdb[VIRTIO_SCSI_CDB_SIZE];
+} __packed;
+
+/* Response, followed by sense data and data-in */
+struct virtio_scsi_cmd_resp {
+	u32 sense_len;		/* Sense data length */
+	u32 resid;		/* Residual bytes in data buffer */
+	u16 status_qualifier;	/* Status qualifier */
+	u8 status;		/* Command completion status */
+	u8 response;		/* Response values */
+	u8 sense[VIRTIO_SCSI_SENSE_SIZE];
+} __packed;
+
+/* Task Management Request */
+struct virtio_scsi_ctrl_tmf_req {
+	u32 type;
+	u32 subtype;
+	u8 lun[8];
+	u64 tag;
+} __packed;
+
+struct virtio_scsi_ctrl_tmf_resp {
+	u8 response;
+} __packed;
+
+/* Asynchronous notification query/subscription */
+struct virtio_scsi_ctrl_an_req {
+	u32 type;
+	u8 lun[8];
+	u32 event_requested;
+} __packed;
+
+struct virtio_scsi_ctrl_an_resp {
+	u32 event_actual;
+	u8 response;
+} __packed;
+
+struct virtio_scsi_event {
+	u32 event;
+	u8 lun[8];
+	u32 reason;
+} __packed;
+
+struct virtio_scsi_config {
+	u32 num_queues;
+	u32 seg_max;
+	u32 max_sectors;
+	u32 cmd_per_lun;
+	u32 event_info_size;
+	u32 sense_size;
+	u32 cdb_size;
+	u16 max_channel;
+	u16 max_target;
+	u32 max_lun;
+} __packed;
+
+/* Response codes */
+#define VIRTIO_SCSI_S_OK                       0
+#define VIRTIO_SCSI_S_OVERRUN                  1
+#define VIRTIO_SCSI_S_ABORTED                  2
+#define VIRTIO_SCSI_S_BAD_TARGET               3
+#define VIRTIO_SCSI_S_RESET                    4
+#define VIRTIO_SCSI_S_BUSY                     5
+#define VIRTIO_SCSI_S_TRANSPORT_FAILURE        6
+#define VIRTIO_SCSI_S_TARGET_FAILURE           7
+#define VIRTIO_SCSI_S_NEXUS_FAILURE            8
+#define VIRTIO_SCSI_S_FAILURE                  9
+#define VIRTIO_SCSI_S_FUNCTION_SUCCEEDED       10
+#define VIRTIO_SCSI_S_FUNCTION_REJECTED        11
+#define VIRTIO_SCSI_S_INCORRECT_LUN            12
+
+/* Controlq type codes.  */
+#define VIRTIO_SCSI_T_TMF                      0
+#define VIRTIO_SCSI_T_AN_QUERY                 1
+#define VIRTIO_SCSI_T_AN_SUBSCRIBE             2
+
+/* Valid TMF subtypes.  */
+#define VIRTIO_SCSI_T_TMF_ABORT_TASK           0
+#define VIRTIO_SCSI_T_TMF_ABORT_TASK_SET       1
+#define VIRTIO_SCSI_T_TMF_CLEAR_ACA            2
+#define VIRTIO_SCSI_T_TMF_CLEAR_TASK_SET       3
+#define VIRTIO_SCSI_T_TMF_I_T_NEXUS_RESET      4
+#define VIRTIO_SCSI_T_TMF_LOGICAL_UNIT_RESET   5
+#define VIRTIO_SCSI_T_TMF_QUERY_TASK           6
+#define VIRTIO_SCSI_T_TMF_QUERY_TASK_SET       7
+
+/* Events.  */
+#define VIRTIO_SCSI_T_EVENTS_MISSED            0x80000000
+#define VIRTIO_SCSI_T_NO_EVENT                 0
+#define VIRTIO_SCSI_T_TRANSPORT_RESET          1
+#define VIRTIO_SCSI_T_ASYNC_NOTIFY             2
+
+#define VIRTIO_SCSI_S_SIMPLE                   0
+#define VIRTIO_SCSI_S_ORDERED                  1
+#define VIRTIO_SCSI_S_HEAD                     2
+#define VIRTIO_SCSI_S_ACA                      3
+
+
+#endif /* _LINUX_VIRTIO_SCSI_H */
diff --git a/include/linux/vlynq.h b/include/linux/vlynq.h
new file mode 100644
index 00000000..017d4a53
--- /dev/null
+++ b/include/linux/vlynq.h
@@ -0,0 +1,162 @@
+/*
+ * Copyright (C) 2006, 2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __VLYNQ_H__
+#define __VLYNQ_H__
+
+#include <linux/device.h>
+#include <linux/types.h>
+
+struct module;
+
+#define VLYNQ_NUM_IRQS 32
+
+struct vlynq_mapping {
+	u32 size;
+	u32 offset;
+};
+
+enum vlynq_divisor {
+	vlynq_div_auto = 0,
+	vlynq_ldiv1,
+	vlynq_ldiv2,
+	vlynq_ldiv3,
+	vlynq_ldiv4,
+	vlynq_ldiv5,
+	vlynq_ldiv6,
+	vlynq_ldiv7,
+	vlynq_ldiv8,
+	vlynq_rdiv1,
+	vlynq_rdiv2,
+	vlynq_rdiv3,
+	vlynq_rdiv4,
+	vlynq_rdiv5,
+	vlynq_rdiv6,
+	vlynq_rdiv7,
+	vlynq_rdiv8,
+	vlynq_div_external
+};
+
+struct vlynq_device_id {
+	u32 id;
+	enum vlynq_divisor divisor;
+	unsigned long driver_data;
+};
+
+struct vlynq_regs;
+struct vlynq_device {
+	u32 id, dev_id;
+	int local_irq;
+	int remote_irq;
+	enum vlynq_divisor divisor;
+	u32 regs_start, regs_end;
+	u32 mem_start, mem_end;
+	u32 irq_start, irq_end;
+	int irq;
+	int enabled;
+	struct vlynq_regs *local;
+	struct vlynq_regs *remote;
+	struct device dev;
+};
+
+struct vlynq_driver {
+	char *name;
+	struct vlynq_device_id *id_table;
+	int (*probe)(struct vlynq_device *dev, struct vlynq_device_id *id);
+	void (*remove)(struct vlynq_device *dev);
+	struct device_driver driver;
+};
+
+struct plat_vlynq_ops {
+	int (*on)(struct vlynq_device *dev);
+	void (*off)(struct vlynq_device *dev);
+};
+
+static inline struct vlynq_driver *to_vlynq_driver(struct device_driver *drv)
+{
+	return container_of(drv, struct vlynq_driver, driver);
+}
+
+static inline struct vlynq_device *to_vlynq_device(struct device *device)
+{
+	return container_of(device, struct vlynq_device, dev);
+}
+
+extern struct bus_type vlynq_bus_type;
+
+extern int __vlynq_register_driver(struct vlynq_driver *driver,
+				   struct module *owner);
+
+static inline int vlynq_register_driver(struct vlynq_driver *driver)
+{
+	return __vlynq_register_driver(driver, THIS_MODULE);
+}
+
+static inline void *vlynq_get_drvdata(struct vlynq_device *dev)
+{
+	return dev_get_drvdata(&dev->dev);
+}
+
+static inline void vlynq_set_drvdata(struct vlynq_device *dev, void *data)
+{
+	dev_set_drvdata(&dev->dev, data);
+}
+
+static inline u32 vlynq_mem_start(struct vlynq_device *dev)
+{
+	return dev->mem_start;
+}
+
+static inline u32 vlynq_mem_end(struct vlynq_device *dev)
+{
+	return dev->mem_end;
+}
+
+static inline u32 vlynq_mem_len(struct vlynq_device *dev)
+{
+	return dev->mem_end - dev->mem_start + 1;
+}
+
+static inline int vlynq_virq_to_irq(struct vlynq_device *dev, int virq)
+{
+	int irq = dev->irq_start + virq;
+	if ((irq < dev->irq_start) || (irq > dev->irq_end))
+		return -EINVAL;
+
+	return irq;
+}
+
+static inline int vlynq_irq_to_virq(struct vlynq_device *dev, int irq)
+{
+	if ((irq < dev->irq_start) || (irq > dev->irq_end))
+		return -EINVAL;
+
+	return irq - dev->irq_start;
+}
+
+extern void vlynq_unregister_driver(struct vlynq_driver *driver);
+extern int vlynq_enable_device(struct vlynq_device *dev);
+extern void vlynq_disable_device(struct vlynq_device *dev);
+extern int vlynq_set_local_mapping(struct vlynq_device *dev, u32 tx_offset,
+				   struct vlynq_mapping *mapping);
+extern int vlynq_set_remote_mapping(struct vlynq_device *dev, u32 tx_offset,
+				    struct vlynq_mapping *mapping);
+extern int vlynq_set_local_irq(struct vlynq_device *dev, int virq);
+extern int vlynq_set_remote_irq(struct vlynq_device *dev, int virq);
+
+#endif /* __VLYNQ_H__ */
diff --git a/include/linux/vm_event_item.h b/include/linux/vm_event_item.h
new file mode 100644
index 00000000..06f8e385
--- /dev/null
+++ b/include/linux/vm_event_item.h
@@ -0,0 +1,65 @@
+#ifndef VM_EVENT_ITEM_H_INCLUDED
+#define VM_EVENT_ITEM_H_INCLUDED
+
+#ifdef CONFIG_ZONE_DMA
+#define DMA_ZONE(xx) xx##_DMA,
+#else
+#define DMA_ZONE(xx)
+#endif
+
+#ifdef CONFIG_ZONE_DMA32
+#define DMA32_ZONE(xx) xx##_DMA32,
+#else
+#define DMA32_ZONE(xx)
+#endif
+
+#ifdef CONFIG_HIGHMEM
+#define HIGHMEM_ZONE(xx) , xx##_HIGH
+#else
+#define HIGHMEM_ZONE(xx)
+#endif
+
+#define FOR_ALL_ZONES(xx) DMA_ZONE(xx) DMA32_ZONE(xx) xx##_NORMAL HIGHMEM_ZONE(xx) , xx##_MOVABLE
+
+enum vm_event_item { PGPGIN, PGPGOUT, PSWPIN, PSWPOUT,
+		FOR_ALL_ZONES(PGALLOC),
+		PGFREE, PGACTIVATE, PGDEACTIVATE,
+		PGFAULT, PGMAJFAULT,
+		FOR_ALL_ZONES(PGREFILL),
+		FOR_ALL_ZONES(PGSTEAL_KSWAPD),
+		FOR_ALL_ZONES(PGSTEAL_DIRECT),
+		FOR_ALL_ZONES(PGSCAN_KSWAPD),
+		FOR_ALL_ZONES(PGSCAN_DIRECT),
+#ifdef CONFIG_NUMA
+		PGSCAN_ZONE_RECLAIM_FAILED,
+#endif
+		PGINODESTEAL, SLABS_SCANNED, KSWAPD_INODESTEAL,
+		KSWAPD_LOW_WMARK_HIT_QUICKLY, KSWAPD_HIGH_WMARK_HIT_QUICKLY,
+		KSWAPD_SKIP_CONGESTION_WAIT,
+		PAGEOUTRUN, ALLOCSTALL, PGROTATED,
+#ifdef CONFIG_COMPACTION
+		COMPACTBLOCKS, COMPACTPAGES, COMPACTPAGEFAILED,
+		COMPACTSTALL, COMPACTFAIL, COMPACTSUCCESS,
+#endif
+#ifdef CONFIG_HUGETLB_PAGE
+		HTLB_BUDDY_PGALLOC, HTLB_BUDDY_PGALLOC_FAIL,
+#endif
+		UNEVICTABLE_PGCULLED,	/* culled to noreclaim list */
+		UNEVICTABLE_PGSCANNED,	/* scanned for reclaimability */
+		UNEVICTABLE_PGRESCUED,	/* rescued from noreclaim list */
+		UNEVICTABLE_PGMLOCKED,
+		UNEVICTABLE_PGMUNLOCKED,
+		UNEVICTABLE_PGCLEARED,	/* on COW, page truncate */
+		UNEVICTABLE_PGSTRANDED,	/* unable to isolate on unlock */
+		UNEVICTABLE_MLOCKFREED,
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+		THP_FAULT_ALLOC,
+		THP_FAULT_FALLBACK,
+		THP_COLLAPSE_ALLOC,
+		THP_COLLAPSE_ALLOC_FAILED,
+		THP_SPLIT,
+#endif
+		NR_VM_EVENT_ITEMS
+};
+
+#endif		/* VM_EVENT_ITEM_H_INCLUDED */
diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
new file mode 100644
index 00000000..dcdfc2bd
--- /dev/null
+++ b/include/linux/vmalloc.h
@@ -0,0 +1,160 @@
+#ifndef _LINUX_VMALLOC_H
+#define _LINUX_VMALLOC_H
+
+#include <linux/spinlock.h>
+#include <linux/init.h>
+#include <asm/page.h>		/* pgprot_t */
+
+struct vm_area_struct;		/* vma defining user mapping in mm_types.h */
+
+/* bits in flags of vmalloc's vm_struct below */
+#define VM_IOREMAP	0x00000001	/* ioremap() and friends */
+#define VM_ALLOC	0x00000002	/* vmalloc() */
+#define VM_MAP		0x00000004	/* vmap()ed pages */
+#define VM_USERMAP	0x00000008	/* suitable for remap_vmalloc_range */
+#define VM_VPAGES	0x00000010	/* buffer for pages was vmalloc'ed */
+#define VM_UNLIST	0x00000020	/* vm_struct is not listed in vmlist */
+/* bits [20..32] reserved for arch specific ioremap internals */
+
+/*
+ * Maximum alignment for ioremap() regions.
+ * Can be overriden by arch-specific value.
+ */
+#ifndef IOREMAP_MAX_ORDER
+#define IOREMAP_MAX_ORDER	(7 + PAGE_SHIFT)	/* 128 pages */
+#endif
+
+struct vm_struct {
+	struct vm_struct	*next;
+	void			*addr;
+	unsigned long		size;
+	unsigned long		flags;
+	struct page		**pages;
+	unsigned int		nr_pages;
+	phys_addr_t		phys_addr;
+	void			*caller;
+};
+
+/*
+ *	Highlevel APIs for driver use
+ */
+extern void vm_unmap_ram(const void *mem, unsigned int count);
+extern void *vm_map_ram(struct page **pages, unsigned int count,
+				int node, pgprot_t prot);
+extern void vm_unmap_aliases(void);
+
+#ifdef CONFIG_MMU
+extern void __init vmalloc_init(void);
+#else
+static inline void vmalloc_init(void)
+{
+}
+#endif
+
+extern void *vmalloc(unsigned long size);
+extern void *vzalloc(unsigned long size);
+extern void *vmalloc_user(unsigned long size);
+extern void *vmalloc_node(unsigned long size, int node);
+extern void *vzalloc_node(unsigned long size, int node);
+extern void *vmalloc_exec(unsigned long size);
+extern void *vmalloc_32(unsigned long size);
+extern void *vmalloc_32_user(unsigned long size);
+extern void *__vmalloc(unsigned long size, gfp_t gfp_mask, pgprot_t prot);
+extern void *__vmalloc_node_range(unsigned long size, unsigned long align,
+			unsigned long start, unsigned long end, gfp_t gfp_mask,
+			pgprot_t prot, int node, void *caller);
+extern void vfree(const void *addr);
+
+extern void *vmap(struct page **pages, unsigned int count,
+			unsigned long flags, pgprot_t prot);
+extern void vunmap(const void *addr);
+
+extern int remap_vmalloc_range(struct vm_area_struct *vma, void *addr,
+							unsigned long pgoff);
+void vmalloc_sync_all(void);
+ 
+/*
+ *	Lowlevel-APIs (not for driver use!)
+ */
+
+static inline size_t get_vm_area_size(const struct vm_struct *area)
+{
+	/* return actual size without guard page */
+	return area->size - PAGE_SIZE;
+}
+
+extern struct vm_struct *get_vm_area(unsigned long size, unsigned long flags);
+extern struct vm_struct *get_vm_area_caller(unsigned long size,
+					unsigned long flags, void *caller);
+extern struct vm_struct *__get_vm_area(unsigned long size, unsigned long flags,
+					unsigned long start, unsigned long end);
+extern struct vm_struct *__get_vm_area_caller(unsigned long size,
+					unsigned long flags,
+					unsigned long start, unsigned long end,
+					void *caller);
+extern struct vm_struct *remove_vm_area(const void *addr);
+
+extern int map_vm_area(struct vm_struct *area, pgprot_t prot,
+			struct page ***pages);
+#ifdef CONFIG_MMU
+extern int map_kernel_range_noflush(unsigned long start, unsigned long size,
+				    pgprot_t prot, struct page **pages);
+extern void unmap_kernel_range_noflush(unsigned long addr, unsigned long size);
+extern void unmap_kernel_range(unsigned long addr, unsigned long size);
+#else
+static inline int
+map_kernel_range_noflush(unsigned long start, unsigned long size,
+			pgprot_t prot, struct page **pages)
+{
+	return size >> PAGE_SHIFT;
+}
+static inline void
+unmap_kernel_range_noflush(unsigned long addr, unsigned long size)
+{
+}
+static inline void
+unmap_kernel_range(unsigned long addr, unsigned long size)
+{
+}
+#endif
+
+/* Allocate/destroy a 'vmalloc' VM area. */
+extern struct vm_struct *alloc_vm_area(size_t size, pte_t **ptes);
+extern void free_vm_area(struct vm_struct *area);
+
+/* for /dev/kmem */
+extern long vread(char *buf, char *addr, unsigned long count);
+extern long vwrite(char *buf, char *addr, unsigned long count);
+
+/*
+ *	Internals.  Dont't use..
+ */
+extern rwlock_t vmlist_lock;
+extern struct vm_struct *vmlist;
+extern __init void vm_area_add_early(struct vm_struct *vm);
+extern __init void vm_area_register_early(struct vm_struct *vm, size_t align);
+
+#ifdef CONFIG_SMP
+# ifdef CONFIG_MMU
+struct vm_struct **pcpu_get_vm_areas(const unsigned long *offsets,
+				     const size_t *sizes, int nr_vms,
+				     size_t align);
+
+void pcpu_free_vm_areas(struct vm_struct **vms, int nr_vms);
+# else
+static inline struct vm_struct **
+pcpu_get_vm_areas(const unsigned long *offsets,
+		const size_t *sizes, int nr_vms,
+		size_t align)
+{
+	return NULL;
+}
+
+static inline void
+pcpu_free_vm_areas(struct vm_struct **vms, int nr_vms)
+{
+}
+# endif
+#endif
+
+#endif /* _LINUX_VMALLOC_H */
diff --git a/include/linux/vmstat.h b/include/linux/vmstat.h
new file mode 100644
index 00000000..65efb92d
--- /dev/null
+++ b/include/linux/vmstat.h
@@ -0,0 +1,263 @@
+#ifndef _LINUX_VMSTAT_H
+#define _LINUX_VMSTAT_H
+
+#include <linux/types.h>
+#include <linux/percpu.h>
+#include <linux/mm.h>
+#include <linux/mmzone.h>
+#include <linux/vm_event_item.h>
+#include <linux/atomic.h>
+
+extern int sysctl_stat_interval;
+
+#ifdef CONFIG_VM_EVENT_COUNTERS
+/*
+ * Light weight per cpu counter implementation.
+ *
+ * Counters should only be incremented and no critical kernel component
+ * should rely on the counter values.
+ *
+ * Counters are handled completely inline. On many platforms the code
+ * generated will simply be the increment of a global address.
+ */
+
+struct vm_event_state {
+	unsigned long event[NR_VM_EVENT_ITEMS];
+};
+
+DECLARE_PER_CPU(struct vm_event_state, vm_event_states);
+
+static inline void __count_vm_event(enum vm_event_item item)
+{
+	__this_cpu_inc(vm_event_states.event[item]);
+}
+
+static inline void count_vm_event(enum vm_event_item item)
+{
+	this_cpu_inc(vm_event_states.event[item]);
+}
+
+static inline void __count_vm_events(enum vm_event_item item, long delta)
+{
+	__this_cpu_add(vm_event_states.event[item], delta);
+}
+
+static inline void count_vm_events(enum vm_event_item item, long delta)
+{
+	this_cpu_add(vm_event_states.event[item], delta);
+}
+
+extern void all_vm_events(unsigned long *);
+#ifdef CONFIG_HOTPLUG
+extern void vm_events_fold_cpu(int cpu);
+#else
+static inline void vm_events_fold_cpu(int cpu)
+{
+}
+#endif
+
+#else
+
+/* Disable counters */
+static inline void count_vm_event(enum vm_event_item item)
+{
+}
+static inline void count_vm_events(enum vm_event_item item, long delta)
+{
+}
+static inline void __count_vm_event(enum vm_event_item item)
+{
+}
+static inline void __count_vm_events(enum vm_event_item item, long delta)
+{
+}
+static inline void all_vm_events(unsigned long *ret)
+{
+}
+static inline void vm_events_fold_cpu(int cpu)
+{
+}
+
+#endif /* CONFIG_VM_EVENT_COUNTERS */
+
+#define __count_zone_vm_events(item, zone, delta) \
+		__count_vm_events(item##_NORMAL - ZONE_NORMAL + \
+		zone_idx(zone), delta)
+
+/*
+ * Zone based page accounting with per cpu differentials.
+ */
+extern atomic_long_t vm_stat[NR_VM_ZONE_STAT_ITEMS];
+
+static inline void zone_page_state_add(long x, struct zone *zone,
+				 enum zone_stat_item item)
+{
+	atomic_long_add(x, &zone->vm_stat[item]);
+	atomic_long_add(x, &vm_stat[item]);
+}
+
+static inline unsigned long global_page_state(enum zone_stat_item item)
+{
+	long x = atomic_long_read(&vm_stat[item]);
+#ifdef CONFIG_SMP
+	if (x < 0)
+		x = 0;
+#endif
+	return x;
+}
+
+static inline unsigned long zone_page_state(struct zone *zone,
+					enum zone_stat_item item)
+{
+	long x = atomic_long_read(&zone->vm_stat[item]);
+#ifdef CONFIG_SMP
+	if (x < 0)
+		x = 0;
+#endif
+	return x;
+}
+
+/*
+ * More accurate version that also considers the currently pending
+ * deltas. For that we need to loop over all cpus to find the current
+ * deltas. There is no synchronization so the result cannot be
+ * exactly accurate either.
+ */
+static inline unsigned long zone_page_state_snapshot(struct zone *zone,
+					enum zone_stat_item item)
+{
+	long x = atomic_long_read(&zone->vm_stat[item]);
+
+#ifdef CONFIG_SMP
+	int cpu;
+	for_each_online_cpu(cpu)
+		x += per_cpu_ptr(zone->pageset, cpu)->vm_stat_diff[item];
+
+	if (x < 0)
+		x = 0;
+#endif
+	return x;
+}
+
+extern unsigned long global_reclaimable_pages(void);
+extern unsigned long zone_reclaimable_pages(struct zone *zone);
+
+#ifdef CONFIG_NUMA
+/*
+ * Determine the per node value of a stat item. This function
+ * is called frequently in a NUMA machine, so try to be as
+ * frugal as possible.
+ */
+static inline unsigned long node_page_state(int node,
+				 enum zone_stat_item item)
+{
+	struct zone *zones = NODE_DATA(node)->node_zones;
+
+	return
+#ifdef CONFIG_ZONE_DMA
+		zone_page_state(&zones[ZONE_DMA], item) +
+#endif
+#ifdef CONFIG_ZONE_DMA32
+		zone_page_state(&zones[ZONE_DMA32], item) +
+#endif
+#ifdef CONFIG_HIGHMEM
+		zone_page_state(&zones[ZONE_HIGHMEM], item) +
+#endif
+		zone_page_state(&zones[ZONE_NORMAL], item) +
+		zone_page_state(&zones[ZONE_MOVABLE], item);
+}
+
+extern void zone_statistics(struct zone *, struct zone *, gfp_t gfp);
+
+#else
+
+#define node_page_state(node, item) global_page_state(item)
+#define zone_statistics(_zl, _z, gfp) do { } while (0)
+
+#endif /* CONFIG_NUMA */
+
+#define add_zone_page_state(__z, __i, __d) mod_zone_page_state(__z, __i, __d)
+#define sub_zone_page_state(__z, __i, __d) mod_zone_page_state(__z, __i, -(__d))
+
+static inline void zap_zone_vm_stats(struct zone *zone)
+{
+	memset(zone->vm_stat, 0, sizeof(zone->vm_stat));
+}
+
+extern void inc_zone_state(struct zone *, enum zone_stat_item);
+
+#ifdef CONFIG_SMP
+void __mod_zone_page_state(struct zone *, enum zone_stat_item item, int);
+void __inc_zone_page_state(struct page *, enum zone_stat_item);
+void __dec_zone_page_state(struct page *, enum zone_stat_item);
+
+void mod_zone_page_state(struct zone *, enum zone_stat_item, int);
+void inc_zone_page_state(struct page *, enum zone_stat_item);
+void dec_zone_page_state(struct page *, enum zone_stat_item);
+
+extern void inc_zone_state(struct zone *, enum zone_stat_item);
+extern void __inc_zone_state(struct zone *, enum zone_stat_item);
+extern void dec_zone_state(struct zone *, enum zone_stat_item);
+extern void __dec_zone_state(struct zone *, enum zone_stat_item);
+
+void refresh_cpu_vm_stats(int);
+void refresh_zone_stat_thresholds(void);
+
+int calculate_pressure_threshold(struct zone *zone);
+int calculate_normal_threshold(struct zone *zone);
+void set_pgdat_percpu_threshold(pg_data_t *pgdat,
+				int (*calculate_pressure)(struct zone *));
+#else /* CONFIG_SMP */
+
+/*
+ * We do not maintain differentials in a single processor configuration.
+ * The functions directly modify the zone and global counters.
+ */
+static inline void __mod_zone_page_state(struct zone *zone,
+			enum zone_stat_item item, int delta)
+{
+	zone_page_state_add(delta, zone, item);
+}
+
+static inline void __inc_zone_state(struct zone *zone, enum zone_stat_item item)
+{
+	atomic_long_inc(&zone->vm_stat[item]);
+	atomic_long_inc(&vm_stat[item]);
+}
+
+static inline void __inc_zone_page_state(struct page *page,
+			enum zone_stat_item item)
+{
+	__inc_zone_state(page_zone(page), item);
+}
+
+static inline void __dec_zone_state(struct zone *zone, enum zone_stat_item item)
+{
+	atomic_long_dec(&zone->vm_stat[item]);
+	atomic_long_dec(&vm_stat[item]);
+}
+
+static inline void __dec_zone_page_state(struct page *page,
+			enum zone_stat_item item)
+{
+	__dec_zone_state(page_zone(page), item);
+}
+
+/*
+ * We only use atomic operations to update counters. So there is no need to
+ * disable interrupts.
+ */
+#define inc_zone_page_state __inc_zone_page_state
+#define dec_zone_page_state __dec_zone_page_state
+#define mod_zone_page_state __mod_zone_page_state
+
+#define set_pgdat_percpu_threshold(pgdat, callback) { }
+
+static inline void refresh_cpu_vm_stats(int cpu) { }
+static inline void refresh_zone_stat_thresholds(void) { }
+
+#endif		/* CONFIG_SMP */
+
+extern const char * const vmstat_text[];
+
+#endif /* _LINUX_VMSTAT_H */
diff --git a/include/linux/vt.h b/include/linux/vt.h
new file mode 100644
index 00000000..30a8dd9c
--- /dev/null
+++ b/include/linux/vt.h
@@ -0,0 +1,113 @@
+#ifndef _LINUX_VT_H
+#define _LINUX_VT_H
+
+
+/*
+ * These constants are also useful for user-level apps (e.g., VC
+ * resizing).
+ */
+#define MIN_NR_CONSOLES 1       /* must be at least 1 */
+#define MAX_NR_CONSOLES	63	/* serial lines start at 64 */
+#define MAX_NR_USER_CONSOLES 63	/* must be root to allocate above this */
+		/* Note: the ioctl VT_GETSTATE does not work for
+		   consoles 16 and higher (since it returns a short) */
+
+/* 0x56 is 'V', to avoid collision with termios and kd */
+
+#define VT_OPENQRY	0x5600	/* find available vt */
+
+struct vt_mode {
+	char mode;		/* vt mode */
+	char waitv;		/* if set, hang on writes if not active */
+	short relsig;		/* signal to raise on release req */
+	short acqsig;		/* signal to raise on acquisition */
+	short frsig;		/* unused (set to 0) */
+};
+#define VT_GETMODE	0x5601	/* get mode of active vt */
+#define VT_SETMODE	0x5602	/* set mode of active vt */
+#define		VT_AUTO		0x00	/* auto vt switching */
+#define		VT_PROCESS	0x01	/* process controls switching */
+#define		VT_ACKACQ	0x02	/* acknowledge switch */
+
+struct vt_stat {
+	unsigned short v_active;	/* active vt */
+	unsigned short v_signal;	/* signal to send */
+	unsigned short v_state;		/* vt bitmask */
+};
+#define VT_GETSTATE	0x5603	/* get global vt state info */
+#define VT_SENDSIG	0x5604	/* signal to send to bitmask of vts */
+
+#define VT_RELDISP	0x5605	/* release display */
+
+#define VT_ACTIVATE	0x5606	/* make vt active */
+#define VT_WAITACTIVE	0x5607	/* wait for vt active */
+#define VT_DISALLOCATE	0x5608  /* free memory associated to vt */
+
+struct vt_sizes {
+	unsigned short v_rows;		/* number of rows */
+	unsigned short v_cols;		/* number of columns */
+	unsigned short v_scrollsize;	/* number of lines of scrollback */
+};
+#define VT_RESIZE	0x5609	/* set kernel's idea of screensize */
+
+struct vt_consize {
+	unsigned short v_rows;	/* number of rows */
+	unsigned short v_cols;	/* number of columns */
+	unsigned short v_vlin;	/* number of pixel rows on screen */
+	unsigned short v_clin;	/* number of pixel rows per character */
+	unsigned short v_vcol;	/* number of pixel columns on screen */
+	unsigned short v_ccol;	/* number of pixel columns per character */
+};
+#define VT_RESIZEX      0x560A  /* set kernel's idea of screensize + more */
+#define VT_LOCKSWITCH   0x560B  /* disallow vt switching */
+#define VT_UNLOCKSWITCH 0x560C  /* allow vt switching */
+#define VT_GETHIFONTMASK 0x560D  /* return hi font mask */
+
+struct vt_event {
+	unsigned int event;
+#define VT_EVENT_SWITCH		0x0001	/* Console switch */
+#define VT_EVENT_BLANK		0x0002	/* Screen blank */
+#define VT_EVENT_UNBLANK	0x0004	/* Screen unblank */
+#define VT_EVENT_RESIZE		0x0008	/* Resize display */
+#define VT_MAX_EVENT		0x000F
+	unsigned int oldev;		/* Old console */
+	unsigned int newev;		/* New console (if changing) */
+	unsigned int pad[4];		/* Padding for expansion */
+};
+
+#define VT_WAITEVENT	0x560E	/* Wait for an event */
+
+struct vt_setactivate {
+	unsigned int console;
+	struct vt_mode mode;
+};
+
+#define VT_SETACTIVATE	0x560F	/* Activate and set the mode of a console */
+
+#ifdef __KERNEL__
+
+/* Virtual Terminal events. */
+#define VT_ALLOCATE		0x0001 /* Console got allocated */
+#define VT_DEALLOCATE		0x0002 /* Console will be deallocated */
+#define VT_WRITE		0x0003 /* A char got output */
+#define VT_UPDATE		0x0004 /* A bigger update occurred */
+#define VT_PREWRITE		0x0005 /* A char is about to be written to the console */
+
+#ifdef CONFIG_VT_CONSOLE
+
+extern int vt_kmsg_redirect(int new);
+
+#else
+
+static inline int vt_kmsg_redirect(int new)
+{
+	return 0;
+}
+
+#endif
+
+#endif /* __KERNEL__ */
+
+#define vt_get_kmsg_redirect() vt_kmsg_redirect(-1)
+
+#endif /* _LINUX_VT_H */
diff --git a/include/linux/vt_buffer.h b/include/linux/vt_buffer.h
new file mode 100644
index 00000000..057db7d2
--- /dev/null
+++ b/include/linux/vt_buffer.h
@@ -0,0 +1,63 @@
+/*
+ *	include/linux/vt_buffer.h -- Access to VT screen buffer
+ *
+ *	(c) 1998 Martin Mares <mj@ucw.cz>
+ *
+ *	This is a set of macros and functions which are used in the
+ *	console driver and related code to access the screen buffer.
+ *	In most cases the console works with simple in-memory buffer,
+ *	but when handling hardware text mode consoles, we store
+ *	the foreground console directly in video memory.
+ */
+
+#ifndef _LINUX_VT_BUFFER_H_
+#define _LINUX_VT_BUFFER_H_
+
+
+#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_MDA_CONSOLE)
+#include <asm/vga.h>
+#endif
+
+#ifndef VT_BUF_HAVE_RW
+#define scr_writew(val, addr) (*(addr) = (val))
+#define scr_readw(addr) (*(addr))
+#define scr_memcpyw(d, s, c) memcpy(d, s, c)
+#define scr_memmovew(d, s, c) memmove(d, s, c)
+#define VT_BUF_HAVE_MEMCPYW
+#define VT_BUF_HAVE_MEMMOVEW
+#endif
+
+#ifndef VT_BUF_HAVE_MEMSETW
+static inline void scr_memsetw(u16 *s, u16 c, unsigned int count)
+{
+	count /= 2;
+	while (count--)
+		scr_writew(c, s++);
+}
+#endif
+
+#ifndef VT_BUF_HAVE_MEMCPYW
+static inline void scr_memcpyw(u16 *d, const u16 *s, unsigned int count)
+{
+	count /= 2;
+	while (count--)
+		scr_writew(scr_readw(s++), d++);
+}
+#endif
+
+#ifndef VT_BUF_HAVE_MEMMOVEW
+static inline void scr_memmovew(u16 *d, const u16 *s, unsigned int count)
+{
+	if (d < s)
+		scr_memcpyw(d, s, count);
+	else {
+		count /= 2;
+		d += count;
+		s += count;
+		while (count--)
+			scr_writew(scr_readw(--s), --d);
+	}
+}
+#endif
+
+#endif
diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h
new file mode 100644
index 00000000..e33d77f1
--- /dev/null
+++ b/include/linux/vt_kern.h
@@ -0,0 +1,196 @@
+#ifndef _VT_KERN_H
+#define _VT_KERN_H
+
+/*
+ * this really is an extension of the vc_cons structure in console.c, but
+ * with information needed by the vt package
+ */
+
+#include <linux/vt.h>
+#include <linux/kd.h>
+#include <linux/tty.h>
+#include <linux/mutex.h>
+#include <linux/console_struct.h>
+#include <linux/mm.h>
+#include <linux/consolemap.h>
+#include <linux/notifier.h>
+
+/*
+ * Presently, a lot of graphics programs do not restore the contents of
+ * the higher font pages.  Defining this flag will avoid use of them, but
+ * will lose support for PIO_FONTRESET.  Note that many font operations are
+ * not likely to work with these programs anyway; they need to be
+ * fixed.  The linux/Documentation directory includes a code snippet
+ * to save and restore the text font.
+ */
+#ifdef CONFIG_VGA_CONSOLE
+#define BROKEN_GRAPHICS_PROGRAMS 1
+#endif
+
+extern void kd_mksound(unsigned int hz, unsigned int ticks);
+extern int kbd_rate(struct kbd_repeat *rep);
+extern int fg_console, last_console, want_console;
+
+/* console.c */
+
+int vc_allocate(unsigned int console);
+int vc_cons_allocated(unsigned int console);
+int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines);
+void vc_deallocate(unsigned int console);
+void reset_palette(struct vc_data *vc);
+void do_blank_screen(int entering_gfx);
+void do_unblank_screen(int leaving_gfx);
+void unblank_screen(void);
+void poke_blanked_console(void);
+int con_font_op(struct vc_data *vc, struct console_font_op *op);
+int con_set_cmap(unsigned char __user *cmap);
+int con_get_cmap(unsigned char __user *cmap);
+void scrollback(struct vc_data *vc, int lines);
+void scrollfront(struct vc_data *vc, int lines);
+void update_region(struct vc_data *vc, unsigned long start, int count);
+void redraw_screen(struct vc_data *vc, int is_switch);
+#define update_screen(x) redraw_screen(x, 0)
+#define switch_screen(x) redraw_screen(x, 1)
+
+struct tty_struct;
+int tioclinux(struct tty_struct *tty, unsigned long arg);
+
+#ifdef CONFIG_CONSOLE_TRANSLATIONS
+/* consolemap.c */
+
+struct unimapinit;
+struct unipair;
+
+int con_set_trans_old(unsigned char __user * table);
+int con_get_trans_old(unsigned char __user * table);
+int con_set_trans_new(unsigned short __user * table);
+int con_get_trans_new(unsigned short __user * table);
+int con_clear_unimap(struct vc_data *vc, struct unimapinit *ui);
+int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list);
+int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, struct unipair __user *list);
+int con_set_default_unimap(struct vc_data *vc);
+void con_free_unimap(struct vc_data *vc);
+void con_protect_unimap(struct vc_data *vc, int rdonly);
+int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc);
+
+#define vc_translate(vc, c) ((vc)->vc_translate[(c) |			\
+					((vc)->vc_toggle_meta ? 0x80 : 0)])
+#else
+static inline int con_set_trans_old(unsigned char __user *table)
+{
+	return 0;
+}
+static inline int con_get_trans_old(unsigned char __user *table)
+{
+	return -EINVAL;
+}
+static inline int con_set_trans_new(unsigned short __user *table)
+{
+	return 0;
+}
+static inline int con_get_trans_new(unsigned short __user *table)
+{
+	return -EINVAL;
+}
+static inline int con_clear_unimap(struct vc_data *vc, struct unimapinit *ui)
+{
+	return 0;
+}
+static inline
+int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
+{
+	return 0;
+}
+static inline
+int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct,
+		   struct unipair __user *list)
+{
+	return -EINVAL;
+}
+static inline int con_set_default_unimap(struct vc_data *vc)
+{
+	return 0;
+}
+static inline void con_free_unimap(struct vc_data *vc)
+{
+}
+static inline void con_protect_unimap(struct vc_data *vc, int rdonly)
+{
+}
+static inline
+int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc)
+{
+	return 0;
+}
+
+#define vc_translate(vc, c) (c)
+#endif
+
+/* vt.c */
+void vt_event_post(unsigned int event, unsigned int old, unsigned int new);
+int vt_waitactive(int n);
+void change_console(struct vc_data *new_vc);
+void reset_vc(struct vc_data *vc);
+extern int unbind_con_driver(const struct consw *csw, int first, int last,
+			     int deflt);
+int vty_init(const struct file_operations *console_fops);
+
+static inline bool vt_force_oops_output(struct vc_data *vc)
+{
+	if (oops_in_progress && vc->vc_panic_force_write  && panic_timeout >= 0)
+		return true;
+	return false;
+}
+
+extern char vt_dont_switch;
+extern int default_utf8;
+extern int global_cursor_default;
+
+struct vt_spawn_console {
+	spinlock_t lock;
+	struct pid *pid;
+	int sig;
+};
+extern struct vt_spawn_console vt_spawn_con;
+
+extern int vt_move_to_console(unsigned int vt, int alloc);
+
+/* Interfaces for VC notification of character events (for accessibility etc) */
+
+struct vt_notifier_param {
+	struct vc_data *vc;	/* VC on which the update happened */
+	unsigned int c;		/* Printed char */
+};
+
+extern int register_vt_notifier(struct notifier_block *nb);
+extern int unregister_vt_notifier(struct notifier_block *nb);
+
+extern void hide_boot_cursor(bool hide);
+
+/* keyboard  provided interfaces */
+extern int vt_do_diacrit(unsigned int cmd, void __user *up, int eperm);
+extern int vt_do_kdskbmode(int console, unsigned int arg);
+extern int vt_do_kdskbmeta(int console, unsigned int arg);
+extern int vt_do_kbkeycode_ioctl(int cmd, struct kbkeycode __user *user_kbkc,
+								int perm);
+extern int vt_do_kdsk_ioctl(int cmd, struct kbentry __user *user_kbe,
+					int perm, int console);
+extern int vt_do_kdgkb_ioctl(int cmd, struct kbsentry __user *user_kdgkb,
+                                        int perm);
+extern int vt_do_kdskled(int console, int cmd, unsigned long arg, int perm);
+extern int vt_do_kdgkbmode(int console);
+extern int vt_do_kdgkbmeta(int console);
+extern void vt_reset_unicode(int console);
+extern int vt_get_shift_state(void);
+extern void vt_reset_keyboard(int console);
+extern int vt_get_leds(int console, int flag);
+extern int vt_get_kbd_mode_bit(int console, int bit);
+extern void vt_set_kbd_mode_bit(int console, int bit);
+extern void vt_clr_kbd_mode_bit(int console, int bit);
+extern void vt_set_led_state(int console, int leds);
+extern void vt_set_led_state(int console, int leds);
+extern void vt_kbd_con_start(int console);
+extern void vt_kbd_con_stop(int console);
+
+
+#endif /* _VT_KERN_H */
diff --git a/include/linux/w1-gpio.h b/include/linux/w1-gpio.h
new file mode 100644
index 00000000..3adeff82
--- /dev/null
+++ b/include/linux/w1-gpio.h
@@ -0,0 +1,24 @@
+/*
+ * w1-gpio interface to platform code
+ *
+ * Copyright (C) 2007 Ville Syrjala <syrjala@sci.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+#ifndef _LINUX_W1_GPIO_H
+#define _LINUX_W1_GPIO_H
+
+/**
+ * struct w1_gpio_platform_data - Platform-dependent data for w1-gpio
+ * @pin: GPIO pin to use
+ * @is_open_drain: GPIO pin is configured as open drain
+ */
+struct w1_gpio_platform_data {
+	unsigned int pin;
+	unsigned int is_open_drain:1;
+	void (*enable_external_pullup)(int enable);
+};
+
+#endif /* _LINUX_W1_GPIO_H */
diff --git a/include/linux/wait.h b/include/linux/wait.h
new file mode 100644
index 00000000..1dee81c4
--- /dev/null
+++ b/include/linux/wait.h
@@ -0,0 +1,668 @@
+#ifndef _LINUX_WAIT_H
+#define _LINUX_WAIT_H
+
+#define WNOHANG		0x00000001
+#define WUNTRACED	0x00000002
+#define WSTOPPED	WUNTRACED
+#define WEXITED		0x00000004
+#define WCONTINUED	0x00000008
+#define WNOWAIT		0x01000000	/* Don't reap, just poll status.  */
+
+#define __WNOTHREAD	0x20000000	/* Don't wait on children of other threads in this group */
+#define __WALL		0x40000000	/* Wait on all children, regardless of type */
+#define __WCLONE	0x80000000	/* Wait only on non-SIGCHLD children */
+
+/* First argument to waitid: */
+#define P_ALL		0
+#define P_PID		1
+#define P_PGID		2
+
+#ifdef __KERNEL__
+
+#include <linux/list.h>
+#include <linux/stddef.h>
+#include <linux/spinlock.h>
+#include <asm/current.h>
+
+typedef struct __wait_queue wait_queue_t;
+typedef int (*wait_queue_func_t)(wait_queue_t *wait, unsigned mode, int flags, void *key);
+int default_wake_function(wait_queue_t *wait, unsigned mode, int flags, void *key);
+
+struct __wait_queue {
+	unsigned int flags;
+#define WQ_FLAG_EXCLUSIVE	0x01
+	void *private;
+	wait_queue_func_t func;
+	struct list_head task_list;
+};
+
+struct wait_bit_key {
+	void *flags;
+	int bit_nr;
+};
+
+struct wait_bit_queue {
+	struct wait_bit_key key;
+	wait_queue_t wait;
+};
+
+struct __wait_queue_head {
+	spinlock_t lock;
+	struct list_head task_list;
+};
+typedef struct __wait_queue_head wait_queue_head_t;
+
+struct task_struct;
+
+/*
+ * Macros for declaration and initialisaton of the datatypes
+ */
+
+#define __WAITQUEUE_INITIALIZER(name, tsk) {				\
+	.private	= tsk,						\
+	.func		= default_wake_function,			\
+	.task_list	= { NULL, NULL } }
+
+#define DECLARE_WAITQUEUE(name, tsk)					\
+	wait_queue_t name = __WAITQUEUE_INITIALIZER(name, tsk)
+
+#define __WAIT_QUEUE_HEAD_INITIALIZER(name) {				\
+	.lock		= __SPIN_LOCK_UNLOCKED(name.lock),		\
+	.task_list	= { &(name).task_list, &(name).task_list } }
+
+#define DECLARE_WAIT_QUEUE_HEAD(name) \
+	wait_queue_head_t name = __WAIT_QUEUE_HEAD_INITIALIZER(name)
+
+#define __WAIT_BIT_KEY_INITIALIZER(word, bit)				\
+	{ .flags = word, .bit_nr = bit, }
+
+extern void __init_waitqueue_head(wait_queue_head_t *q, const char *name, struct lock_class_key *);
+
+#define init_waitqueue_head(q)				\
+	do {						\
+		static struct lock_class_key __key;	\
+							\
+		__init_waitqueue_head((q), #q, &__key);	\
+	} while (0)
+
+#ifdef CONFIG_LOCKDEP
+# define __WAIT_QUEUE_HEAD_INIT_ONSTACK(name) \
+	({ init_waitqueue_head(&name); name; })
+# define DECLARE_WAIT_QUEUE_HEAD_ONSTACK(name) \
+	wait_queue_head_t name = __WAIT_QUEUE_HEAD_INIT_ONSTACK(name)
+#else
+# define DECLARE_WAIT_QUEUE_HEAD_ONSTACK(name) DECLARE_WAIT_QUEUE_HEAD(name)
+#endif
+
+static inline void init_waitqueue_entry(wait_queue_t *q, struct task_struct *p)
+{
+	q->flags = 0;
+	q->private = p;
+	q->func = default_wake_function;
+}
+
+static inline void init_waitqueue_func_entry(wait_queue_t *q,
+					wait_queue_func_t func)
+{
+	q->flags = 0;
+	q->private = NULL;
+	q->func = func;
+}
+
+static inline int waitqueue_active(wait_queue_head_t *q)
+{
+	return !list_empty(&q->task_list);
+}
+
+extern void add_wait_queue(wait_queue_head_t *q, wait_queue_t *wait);
+extern void add_wait_queue_exclusive(wait_queue_head_t *q, wait_queue_t *wait);
+extern void remove_wait_queue(wait_queue_head_t *q, wait_queue_t *wait);
+
+static inline void __add_wait_queue(wait_queue_head_t *head, wait_queue_t *new)
+{
+	list_add(&new->task_list, &head->task_list);
+}
+
+/*
+ * Used for wake-one threads:
+ */
+static inline void __add_wait_queue_exclusive(wait_queue_head_t *q,
+					      wait_queue_t *wait)
+{
+	wait->flags |= WQ_FLAG_EXCLUSIVE;
+	__add_wait_queue(q, wait);
+}
+
+static inline void __add_wait_queue_tail(wait_queue_head_t *head,
+					 wait_queue_t *new)
+{
+	list_add_tail(&new->task_list, &head->task_list);
+}
+
+static inline void __add_wait_queue_tail_exclusive(wait_queue_head_t *q,
+					      wait_queue_t *wait)
+{
+	wait->flags |= WQ_FLAG_EXCLUSIVE;
+	__add_wait_queue_tail(q, wait);
+}
+
+static inline void __remove_wait_queue(wait_queue_head_t *head,
+							wait_queue_t *old)
+{
+	list_del(&old->task_list);
+}
+
+void __wake_up(wait_queue_head_t *q, unsigned int mode, int nr, void *key);
+void __wake_up_locked_key(wait_queue_head_t *q, unsigned int mode, void *key);
+void __wake_up_sync_key(wait_queue_head_t *q, unsigned int mode, int nr,
+			void *key);
+void __wake_up_locked(wait_queue_head_t *q, unsigned int mode, int nr);
+void __wake_up_sync(wait_queue_head_t *q, unsigned int mode, int nr);
+void __wake_up_bit(wait_queue_head_t *, void *, int);
+int __wait_on_bit(wait_queue_head_t *, struct wait_bit_queue *, int (*)(void *), unsigned);
+int __wait_on_bit_lock(wait_queue_head_t *, struct wait_bit_queue *, int (*)(void *), unsigned);
+void wake_up_bit(void *, int);
+int out_of_line_wait_on_bit(void *, int, int (*)(void *), unsigned);
+int out_of_line_wait_on_bit_lock(void *, int, int (*)(void *), unsigned);
+wait_queue_head_t *bit_waitqueue(void *, int);
+
+#define wake_up(x)			__wake_up(x, TASK_NORMAL, 1, NULL)
+#define wake_up_nr(x, nr)		__wake_up(x, TASK_NORMAL, nr, NULL)
+#define wake_up_all(x)			__wake_up(x, TASK_NORMAL, 0, NULL)
+#define wake_up_locked(x)		__wake_up_locked((x), TASK_NORMAL, 1)
+#define wake_up_all_locked(x)		__wake_up_locked((x), TASK_NORMAL, 0)
+
+#define wake_up_interruptible(x)	__wake_up(x, TASK_INTERRUPTIBLE, 1, NULL)
+#define wake_up_interruptible_nr(x, nr)	__wake_up(x, TASK_INTERRUPTIBLE, nr, NULL)
+#define wake_up_interruptible_all(x)	__wake_up(x, TASK_INTERRUPTIBLE, 0, NULL)
+#define wake_up_interruptible_sync(x)	__wake_up_sync((x), TASK_INTERRUPTIBLE, 1)
+
+/*
+ * Wakeup macros to be used to report events to the targets.
+ */
+#define wake_up_poll(x, m)				\
+	__wake_up(x, TASK_NORMAL, 1, (void *) (m))
+#define wake_up_locked_poll(x, m)				\
+	__wake_up_locked_key((x), TASK_NORMAL, (void *) (m))
+#define wake_up_interruptible_poll(x, m)			\
+	__wake_up(x, TASK_INTERRUPTIBLE, 1, (void *) (m))
+#define wake_up_interruptible_sync_poll(x, m)				\
+	__wake_up_sync_key((x), TASK_INTERRUPTIBLE, 1, (void *) (m))
+
+#define __wait_event(wq, condition) 					\
+do {									\
+	DEFINE_WAIT(__wait);						\
+									\
+	for (;;) {							\
+		prepare_to_wait(&wq, &__wait, TASK_UNINTERRUPTIBLE);	\
+		if (condition)						\
+			break;						\
+		schedule();						\
+	}								\
+	finish_wait(&wq, &__wait);					\
+} while (0)
+
+/**
+ * wait_event - sleep until a condition gets true
+ * @wq: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ *
+ * The process is put to sleep (TASK_UNINTERRUPTIBLE) until the
+ * @condition evaluates to true. The @condition is checked each time
+ * the waitqueue @wq is woken up.
+ *
+ * wake_up() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ */
+#define wait_event(wq, condition) 					\
+do {									\
+	if (condition)	 						\
+		break;							\
+	__wait_event(wq, condition);					\
+} while (0)
+
+#define __wait_event_timeout(wq, condition, ret)			\
+do {									\
+	DEFINE_WAIT(__wait);						\
+									\
+	for (;;) {							\
+		prepare_to_wait(&wq, &__wait, TASK_UNINTERRUPTIBLE);	\
+		if (condition)						\
+			break;						\
+		ret = schedule_timeout(ret);				\
+		if (!ret)						\
+			break;						\
+	}								\
+	finish_wait(&wq, &__wait);					\
+} while (0)
+
+/**
+ * wait_event_timeout - sleep until a condition gets true or a timeout elapses
+ * @wq: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ * @timeout: timeout, in jiffies
+ *
+ * The process is put to sleep (TASK_UNINTERRUPTIBLE) until the
+ * @condition evaluates to true. The @condition is checked each time
+ * the waitqueue @wq is woken up.
+ *
+ * wake_up() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ *
+ * The function returns 0 if the @timeout elapsed, and the remaining
+ * jiffies if the condition evaluated to true before the timeout elapsed.
+ */
+#define wait_event_timeout(wq, condition, timeout)			\
+({									\
+	long __ret = timeout;						\
+	if (!(condition)) 						\
+		__wait_event_timeout(wq, condition, __ret);		\
+	__ret;								\
+})
+
+#define __wait_event_interruptible(wq, condition, ret)			\
+do {									\
+	DEFINE_WAIT(__wait);						\
+									\
+	for (;;) {							\
+		prepare_to_wait(&wq, &__wait, TASK_INTERRUPTIBLE);	\
+		if (condition)						\
+			break;						\
+		if (!signal_pending(current)) {				\
+			schedule();					\
+			continue;					\
+		}							\
+		ret = -ERESTARTSYS;					\
+		break;							\
+	}								\
+	finish_wait(&wq, &__wait);					\
+} while (0)
+
+/**
+ * wait_event_interruptible - sleep until a condition gets true
+ * @wq: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ *
+ * The process is put to sleep (TASK_INTERRUPTIBLE) until the
+ * @condition evaluates to true or a signal is received.
+ * The @condition is checked each time the waitqueue @wq is woken up.
+ *
+ * wake_up() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ *
+ * The function will return -ERESTARTSYS if it was interrupted by a
+ * signal and 0 if @condition evaluated to true.
+ */
+#define wait_event_interruptible(wq, condition)				\
+({									\
+	int __ret = 0;							\
+	if (!(condition))						\
+		__wait_event_interruptible(wq, condition, __ret);	\
+	__ret;								\
+})
+
+#define __wait_event_interruptible_timeout(wq, condition, ret)		\
+do {									\
+	DEFINE_WAIT(__wait);						\
+									\
+	for (;;) {							\
+		prepare_to_wait(&wq, &__wait, TASK_INTERRUPTIBLE);	\
+		if (condition)						\
+			break;						\
+		if (!signal_pending(current)) {				\
+			ret = schedule_timeout(ret);			\
+			if (!ret)					\
+				break;					\
+			continue;					\
+		}							\
+		ret = -ERESTARTSYS;					\
+		break;							\
+	}								\
+	finish_wait(&wq, &__wait);					\
+} while (0)
+
+/**
+ * wait_event_interruptible_timeout - sleep until a condition gets true or a timeout elapses
+ * @wq: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ * @timeout: timeout, in jiffies
+ *
+ * The process is put to sleep (TASK_INTERRUPTIBLE) until the
+ * @condition evaluates to true or a signal is received.
+ * The @condition is checked each time the waitqueue @wq is woken up.
+ *
+ * wake_up() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ *
+ * The function returns 0 if the @timeout elapsed, -ERESTARTSYS if it
+ * was interrupted by a signal, and the remaining jiffies otherwise
+ * if the condition evaluated to true before the timeout elapsed.
+ */
+#define wait_event_interruptible_timeout(wq, condition, timeout)	\
+({									\
+	long __ret = timeout;						\
+	if (!(condition))						\
+		__wait_event_interruptible_timeout(wq, condition, __ret); \
+	__ret;								\
+})
+
+#define __wait_event_interruptible_exclusive(wq, condition, ret)	\
+do {									\
+	DEFINE_WAIT(__wait);						\
+									\
+	for (;;) {							\
+		prepare_to_wait_exclusive(&wq, &__wait,			\
+					TASK_INTERRUPTIBLE);		\
+		if (condition) {					\
+			finish_wait(&wq, &__wait);			\
+			break;						\
+		}							\
+		if (!signal_pending(current)) {				\
+			schedule();					\
+			continue;					\
+		}							\
+		ret = -ERESTARTSYS;					\
+		abort_exclusive_wait(&wq, &__wait, 			\
+				TASK_INTERRUPTIBLE, NULL);		\
+		break;							\
+	}								\
+} while (0)
+
+#define wait_event_interruptible_exclusive(wq, condition)		\
+({									\
+	int __ret = 0;							\
+	if (!(condition))						\
+		__wait_event_interruptible_exclusive(wq, condition, __ret);\
+	__ret;								\
+})
+
+
+#define __wait_event_interruptible_locked(wq, condition, exclusive, irq) \
+({									\
+	int __ret = 0;							\
+	DEFINE_WAIT(__wait);						\
+	if (exclusive)							\
+		__wait.flags |= WQ_FLAG_EXCLUSIVE;			\
+	do {								\
+		if (likely(list_empty(&__wait.task_list)))		\
+			__add_wait_queue_tail(&(wq), &__wait);		\
+		set_current_state(TASK_INTERRUPTIBLE);			\
+		if (signal_pending(current)) {				\
+			__ret = -ERESTARTSYS;				\
+			break;						\
+		}							\
+		if (irq)						\
+			spin_unlock_irq(&(wq).lock);			\
+		else							\
+			spin_unlock(&(wq).lock);			\
+		schedule();						\
+		if (irq)						\
+			spin_lock_irq(&(wq).lock);			\
+		else							\
+			spin_lock(&(wq).lock);				\
+	} while (!(condition));						\
+	__remove_wait_queue(&(wq), &__wait);				\
+	__set_current_state(TASK_RUNNING);				\
+	__ret;								\
+})
+
+
+/**
+ * wait_event_interruptible_locked - sleep until a condition gets true
+ * @wq: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ *
+ * The process is put to sleep (TASK_INTERRUPTIBLE) until the
+ * @condition evaluates to true or a signal is received.
+ * The @condition is checked each time the waitqueue @wq is woken up.
+ *
+ * It must be called with wq.lock being held.  This spinlock is
+ * unlocked while sleeping but @condition testing is done while lock
+ * is held and when this macro exits the lock is held.
+ *
+ * The lock is locked/unlocked using spin_lock()/spin_unlock()
+ * functions which must match the way they are locked/unlocked outside
+ * of this macro.
+ *
+ * wake_up_locked() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ *
+ * The function will return -ERESTARTSYS if it was interrupted by a
+ * signal and 0 if @condition evaluated to true.
+ */
+#define wait_event_interruptible_locked(wq, condition)			\
+	((condition)							\
+	 ? 0 : __wait_event_interruptible_locked(wq, condition, 0, 0))
+
+/**
+ * wait_event_interruptible_locked_irq - sleep until a condition gets true
+ * @wq: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ *
+ * The process is put to sleep (TASK_INTERRUPTIBLE) until the
+ * @condition evaluates to true or a signal is received.
+ * The @condition is checked each time the waitqueue @wq is woken up.
+ *
+ * It must be called with wq.lock being held.  This spinlock is
+ * unlocked while sleeping but @condition testing is done while lock
+ * is held and when this macro exits the lock is held.
+ *
+ * The lock is locked/unlocked using spin_lock_irq()/spin_unlock_irq()
+ * functions which must match the way they are locked/unlocked outside
+ * of this macro.
+ *
+ * wake_up_locked() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ *
+ * The function will return -ERESTARTSYS if it was interrupted by a
+ * signal and 0 if @condition evaluated to true.
+ */
+#define wait_event_interruptible_locked_irq(wq, condition)		\
+	((condition)							\
+	 ? 0 : __wait_event_interruptible_locked(wq, condition, 0, 1))
+
+/**
+ * wait_event_interruptible_exclusive_locked - sleep exclusively until a condition gets true
+ * @wq: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ *
+ * The process is put to sleep (TASK_INTERRUPTIBLE) until the
+ * @condition evaluates to true or a signal is received.
+ * The @condition is checked each time the waitqueue @wq is woken up.
+ *
+ * It must be called with wq.lock being held.  This spinlock is
+ * unlocked while sleeping but @condition testing is done while lock
+ * is held and when this macro exits the lock is held.
+ *
+ * The lock is locked/unlocked using spin_lock()/spin_unlock()
+ * functions which must match the way they are locked/unlocked outside
+ * of this macro.
+ *
+ * The process is put on the wait queue with an WQ_FLAG_EXCLUSIVE flag
+ * set thus when other process waits process on the list if this
+ * process is awaken further processes are not considered.
+ *
+ * wake_up_locked() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ *
+ * The function will return -ERESTARTSYS if it was interrupted by a
+ * signal and 0 if @condition evaluated to true.
+ */
+#define wait_event_interruptible_exclusive_locked(wq, condition)	\
+	((condition)							\
+	 ? 0 : __wait_event_interruptible_locked(wq, condition, 1, 0))
+
+/**
+ * wait_event_interruptible_exclusive_locked_irq - sleep until a condition gets true
+ * @wq: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ *
+ * The process is put to sleep (TASK_INTERRUPTIBLE) until the
+ * @condition evaluates to true or a signal is received.
+ * The @condition is checked each time the waitqueue @wq is woken up.
+ *
+ * It must be called with wq.lock being held.  This spinlock is
+ * unlocked while sleeping but @condition testing is done while lock
+ * is held and when this macro exits the lock is held.
+ *
+ * The lock is locked/unlocked using spin_lock_irq()/spin_unlock_irq()
+ * functions which must match the way they are locked/unlocked outside
+ * of this macro.
+ *
+ * The process is put on the wait queue with an WQ_FLAG_EXCLUSIVE flag
+ * set thus when other process waits process on the list if this
+ * process is awaken further processes are not considered.
+ *
+ * wake_up_locked() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ *
+ * The function will return -ERESTARTSYS if it was interrupted by a
+ * signal and 0 if @condition evaluated to true.
+ */
+#define wait_event_interruptible_exclusive_locked_irq(wq, condition)	\
+	((condition)							\
+	 ? 0 : __wait_event_interruptible_locked(wq, condition, 1, 1))
+
+
+
+#define __wait_event_killable(wq, condition, ret)			\
+do {									\
+	DEFINE_WAIT(__wait);						\
+									\
+	for (;;) {							\
+		prepare_to_wait(&wq, &__wait, TASK_KILLABLE);		\
+		if (condition)						\
+			break;						\
+		if (!fatal_signal_pending(current)) {			\
+			schedule();					\
+			continue;					\
+		}							\
+		ret = -ERESTARTSYS;					\
+		break;							\
+	}								\
+	finish_wait(&wq, &__wait);					\
+} while (0)
+
+/**
+ * wait_event_killable - sleep until a condition gets true
+ * @wq: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ *
+ * The process is put to sleep (TASK_KILLABLE) until the
+ * @condition evaluates to true or a signal is received.
+ * The @condition is checked each time the waitqueue @wq is woken up.
+ *
+ * wake_up() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ *
+ * The function will return -ERESTARTSYS if it was interrupted by a
+ * signal and 0 if @condition evaluated to true.
+ */
+#define wait_event_killable(wq, condition)				\
+({									\
+	int __ret = 0;							\
+	if (!(condition))						\
+		__wait_event_killable(wq, condition, __ret);		\
+	__ret;								\
+})
+
+/*
+ * These are the old interfaces to sleep waiting for an event.
+ * They are racy.  DO NOT use them, use the wait_event* interfaces above.
+ * We plan to remove these interfaces.
+ */
+extern void sleep_on(wait_queue_head_t *q);
+extern long sleep_on_timeout(wait_queue_head_t *q,
+				      signed long timeout);
+extern void interruptible_sleep_on(wait_queue_head_t *q);
+extern long interruptible_sleep_on_timeout(wait_queue_head_t *q,
+					   signed long timeout);
+
+/*
+ * Waitqueues which are removed from the waitqueue_head at wakeup time
+ */
+void prepare_to_wait(wait_queue_head_t *q, wait_queue_t *wait, int state);
+void prepare_to_wait_exclusive(wait_queue_head_t *q, wait_queue_t *wait, int state);
+void finish_wait(wait_queue_head_t *q, wait_queue_t *wait);
+void abort_exclusive_wait(wait_queue_head_t *q, wait_queue_t *wait,
+			unsigned int mode, void *key);
+int autoremove_wake_function(wait_queue_t *wait, unsigned mode, int sync, void *key);
+int wake_bit_function(wait_queue_t *wait, unsigned mode, int sync, void *key);
+
+#define DEFINE_WAIT_FUNC(name, function)				\
+	wait_queue_t name = {						\
+		.private	= current,				\
+		.func		= function,				\
+		.task_list	= LIST_HEAD_INIT((name).task_list),	\
+	}
+
+#define DEFINE_WAIT(name) DEFINE_WAIT_FUNC(name, autoremove_wake_function)
+
+#define DEFINE_WAIT_BIT(name, word, bit)				\
+	struct wait_bit_queue name = {					\
+		.key = __WAIT_BIT_KEY_INITIALIZER(word, bit),		\
+		.wait	= {						\
+			.private	= current,			\
+			.func		= wake_bit_function,		\
+			.task_list	=				\
+				LIST_HEAD_INIT((name).wait.task_list),	\
+		},							\
+	}
+
+#define init_wait(wait)							\
+	do {								\
+		(wait)->private = current;				\
+		(wait)->func = autoremove_wake_function;		\
+		INIT_LIST_HEAD(&(wait)->task_list);			\
+		(wait)->flags = 0;					\
+	} while (0)
+
+/**
+ * wait_on_bit - wait for a bit to be cleared
+ * @word: the word being waited on, a kernel virtual address
+ * @bit: the bit of the word being waited on
+ * @action: the function used to sleep, which may take special actions
+ * @mode: the task state to sleep in
+ *
+ * There is a standard hashed waitqueue table for generic use. This
+ * is the part of the hashtable's accessor API that waits on a bit.
+ * For instance, if one were to have waiters on a bitflag, one would
+ * call wait_on_bit() in threads waiting for the bit to clear.
+ * One uses wait_on_bit() where one is waiting for the bit to clear,
+ * but has no intention of setting it.
+ */
+static inline int wait_on_bit(void *word, int bit,
+				int (*action)(void *), unsigned mode)
+{
+	if (!test_bit(bit, word))
+		return 0;
+	return out_of_line_wait_on_bit(word, bit, action, mode);
+}
+
+/**
+ * wait_on_bit_lock - wait for a bit to be cleared, when wanting to set it
+ * @word: the word being waited on, a kernel virtual address
+ * @bit: the bit of the word being waited on
+ * @action: the function used to sleep, which may take special actions
+ * @mode: the task state to sleep in
+ *
+ * There is a standard hashed waitqueue table for generic use. This
+ * is the part of the hashtable's accessor API that waits on a bit
+ * when one intends to set it, for instance, trying to lock bitflags.
+ * For instance, if one were to have waiters trying to set bitflag
+ * and waiting for it to clear before setting it, one would call
+ * wait_on_bit() in threads waiting to be able to set the bit.
+ * One uses wait_on_bit_lock() where one is waiting for the bit to
+ * clear with the intention of setting it, and when done, clearing it.
+ */
+static inline int wait_on_bit_lock(void *word, int bit,
+				int (*action)(void *), unsigned mode)
+{
+	if (!test_and_set_bit(bit, word))
+		return 0;
+	return out_of_line_wait_on_bit_lock(word, bit, action, mode);
+}
+	
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/linux/wakelock.h b/include/linux/wakelock.h
new file mode 100644
index 00000000..f4a698a2
--- /dev/null
+++ b/include/linux/wakelock.h
@@ -0,0 +1,67 @@
+/* include/linux/wakelock.h
+ *
+ * Copyright (C) 2007-2012 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _LINUX_WAKELOCK_H
+#define _LINUX_WAKELOCK_H
+
+#include <linux/ktime.h>
+#include <linux/device.h>
+
+/* A wake_lock prevents the system from entering suspend or other low power
+ * states when active. If the type is set to WAKE_LOCK_SUSPEND, the wake_lock
+ * prevents a full system suspend.
+ */
+
+enum {
+	WAKE_LOCK_SUSPEND, /* Prevent suspend */
+	WAKE_LOCK_TYPE_COUNT
+};
+
+struct wake_lock {
+	struct wakeup_source ws;
+};
+
+static inline void wake_lock_init(struct wake_lock *lock, int type,
+				  const char *name)
+{
+	wakeup_source_init(&lock->ws, name);
+}
+
+static inline void wake_lock_destroy(struct wake_lock *lock)
+{
+	wakeup_source_trash(&lock->ws);
+}
+
+static inline void wake_lock(struct wake_lock *lock)
+{
+	__pm_stay_awake(&lock->ws);
+}
+
+static inline void wake_lock_timeout(struct wake_lock *lock, long timeout)
+{
+	__pm_wakeup_event(&lock->ws, jiffies_to_msecs(timeout));
+}
+
+static inline void wake_unlock(struct wake_lock *lock)
+{
+	__pm_relax(&lock->ws);
+}
+
+static inline int wake_lock_active(struct wake_lock *lock)
+{
+	return lock->ws.active;
+}
+
+#endif
diff --git a/include/linux/wanrouter.h b/include/linux/wanrouter.h
new file mode 100644
index 00000000..3157cc1f
--- /dev/null
+++ b/include/linux/wanrouter.h
@@ -0,0 +1,532 @@
+/*****************************************************************************
+* wanrouter.h	Definitions for the WAN Multiprotocol Router Module.
+*		This module provides API and common services for WAN Link
+*		Drivers and is completely hardware-independent.
+*
+* Author: 	Nenad Corbic <ncorbic@sangoma.com>
+*		Gideon Hack 	
+* Additions:	Arnaldo Melo
+*
+* Copyright:	(c) 1995-2000 Sangoma Technologies Inc.
+*
+*		This program is free software; you can redistribute it and/or
+*		modify it under the terms of the GNU General Public License
+*		as published by the Free Software Foundation; either version
+*		2 of the License, or (at your option) any later version.
+* ============================================================================
+* Jul 21, 2000  Nenad Corbic	Added WAN_FT1_READY State
+* Feb 24, 2000  Nenad Corbic    Added support for socket based x25api
+* Jan 28, 2000  Nenad Corbic    Added support for the ASYNC protocol.
+* Oct 04, 1999  Nenad Corbic 	Updated for 2.1.0 release
+* Jun 02, 1999  Gideon Hack	Added support for the S514 adapter.
+* May 23, 1999	Arnaldo Melo	Added local_addr to wanif_conf_t
+*				WAN_DISCONNECTING state added
+* Jul 20, 1998	David Fong	Added Inverse ARP options to 'wanif_conf_t'
+* Jun 12, 1998	David Fong	Added Cisco HDLC support.
+* Dec 16, 1997	Jaspreet Singh	Moved 'enable_IPX' and 'network_number' to
+*				'wanif_conf_t'
+* Dec 05, 1997	Jaspreet Singh	Added 'pap', 'chap' to 'wanif_conf_t'
+*				Added 'authenticator' to 'wan_ppp_conf_t'
+* Nov 06, 1997	Jaspreet Singh	Changed Router Driver version to 1.1 from 1.0
+* Oct 20, 1997	Jaspreet Singh	Added 'cir','bc','be' and 'mc' to 'wanif_conf_t'
+*				Added 'enable_IPX' and 'network_number' to 
+*				'wan_device_t'.  Also added defines for
+*				UDP PACKET TYPE, Interrupt test, critical values
+*				for RACE conditions.
+* Oct 05, 1997	Jaspreet Singh	Added 'dlci_num' and 'dlci[100]' to 
+*				'wan_fr_conf_t' to configure a list of dlci(s)
+*				for a NODE 
+* Jul 07, 1997	Jaspreet Singh	Added 'ttl' to 'wandev_conf_t' & 'wan_device_t'
+* May 29, 1997 	Jaspreet Singh	Added 'tx_int_enabled' to 'wan_device_t'
+* May 21, 1997	Jaspreet Singh	Added 'udp_port' to 'wan_device_t'
+* Apr 25, 1997  Farhan Thawar   Added 'udp_port' to 'wandev_conf_t'
+* Jan 16, 1997	Gene Kozin	router_devlist made public
+* Jan 02, 1997	Gene Kozin	Initial version (based on wanpipe.h).
+*****************************************************************************/
+
+#ifndef	_ROUTER_H
+#define	_ROUTER_H
+
+#define	ROUTER_NAME	"wanrouter"	/* in case we ever change it */
+#define	ROUTER_VERSION	1		/* version number */
+#define	ROUTER_RELEASE	1		/* release (minor version) number */
+#define	ROUTER_IOCTL	'W'		/* for IOCTL calls */
+#define	ROUTER_MAGIC	0x524D4157L	/* signature: 'WANR' reversed */
+
+/* IOCTL codes for /proc/router/<device> entries (up to 255) */
+enum router_ioctls
+{
+	ROUTER_SETUP	= ROUTER_IOCTL<<8,	/* configure device */
+	ROUTER_DOWN,				/* shut down device */
+	ROUTER_STAT,				/* get device status */
+	ROUTER_IFNEW,				/* add interface */
+	ROUTER_IFDEL,				/* delete interface */
+	ROUTER_IFSTAT,				/* get interface status */
+	ROUTER_USER	= (ROUTER_IOCTL<<8)+16,	/* driver-specific calls */
+	ROUTER_USER_MAX	= (ROUTER_IOCTL<<8)+31
+};
+
+/* identifiers for displaying proc file data for dual port adapters */
+#define PROC_DATA_PORT_0 0x8000	/* the data is for port 0 */
+#define PROC_DATA_PORT_1 0x8001	/* the data is for port 1 */
+
+/* NLPID for packet encapsulation (ISO/IEC TR 9577) */
+#define	NLPID_IP	0xCC	/* Internet Protocol Datagram */
+#define	NLPID_SNAP	0x80	/* IEEE Subnetwork Access Protocol */
+#define	NLPID_CLNP	0x81	/* ISO/IEC 8473 */
+#define	NLPID_ESIS	0x82	/* ISO/IEC 9542 */
+#define	NLPID_ISIS	0x83	/* ISO/IEC ISIS */
+#define	NLPID_Q933	0x08	/* CCITT Q.933 */
+
+/* Miscellaneous */
+#define	WAN_IFNAME_SZ	15	/* max length of the interface name */
+#define	WAN_DRVNAME_SZ	15	/* max length of the link driver name */
+#define	WAN_ADDRESS_SZ	31	/* max length of the WAN media address */
+#define USED_BY_FIELD	8	/* max length of the used by field */
+
+/* Defines for UDP PACKET TYPE */
+#define UDP_PTPIPE_TYPE 	0x01
+#define UDP_FPIPE_TYPE		0x02
+#define UDP_CPIPE_TYPE		0x03
+#define UDP_DRVSTATS_TYPE 	0x04
+#define UDP_INVALID_TYPE  	0x05
+
+/* Command return code */
+#define CMD_OK		0		/* normal firmware return code */
+#define CMD_TIMEOUT	0xFF		/* firmware command timed out */
+
+/* UDP Packet Management */
+#define UDP_PKT_FRM_STACK	0x00
+#define UDP_PKT_FRM_NETWORK	0x01
+
+/* Maximum interrupt test counter */
+#define MAX_INTR_TEST_COUNTER	100
+
+/* Critical Values for RACE conditions*/
+#define CRITICAL_IN_ISR		0xA1
+#define CRITICAL_INTR_HANDLED	0xB1
+
+/****** Data Types **********************************************************/
+
+/*----------------------------------------------------------------------------
+ * X.25-specific link-level configuration.
+ */
+typedef struct wan_x25_conf
+{
+	unsigned lo_pvc;	/* lowest permanent circuit number */
+	unsigned hi_pvc;	/* highest permanent circuit number */
+	unsigned lo_svc;	/* lowest switched circuit number */
+	unsigned hi_svc;	/* highest switched circuit number */
+	unsigned hdlc_window;	/* HDLC window size (1..7) */
+	unsigned pkt_window;	/* X.25 packet window size (1..7) */
+	unsigned t1;		/* HDLC timer T1, sec (1..30) */
+	unsigned t2;		/* HDLC timer T2, sec (0..29) */
+	unsigned t4;		/* HDLC supervisory frame timer = T4 * T1 */
+	unsigned n2;		/* HDLC retransmission limit (1..30) */
+	unsigned t10_t20;	/* X.25 RESTART timeout, sec (1..255) */
+	unsigned t11_t21;	/* X.25 CALL timeout, sec (1..255) */
+	unsigned t12_t22;	/* X.25 RESET timeout, sec (1..255) */
+	unsigned t13_t23;	/* X.25 CLEAR timeout, sec (1..255) */
+	unsigned t16_t26;	/* X.25 INTERRUPT timeout, sec (1..255) */
+	unsigned t28;		/* X.25 REGISTRATION timeout, sec (1..255) */
+	unsigned r10_r20;	/* RESTART retransmission limit (0..250) */
+	unsigned r12_r22;	/* RESET retransmission limit (0..250) */
+	unsigned r13_r23;	/* CLEAR retransmission limit (0..250) */
+	unsigned ccitt_compat;	/* compatibility mode: 1988/1984/1980 */
+	unsigned x25_conf_opt;   /* User defined x25 config optoins */
+	unsigned char LAPB_hdlc_only; /* Run in HDLC only mode */
+	unsigned char logging;   /* Control connection logging */  
+	unsigned char oob_on_modem; /* Whether to send modem status to the user app */
+} wan_x25_conf_t;
+
+/*----------------------------------------------------------------------------
+ * Frame relay specific link-level configuration.
+ */
+typedef struct wan_fr_conf
+{
+	unsigned signalling;	/* local in-channel signalling type */
+	unsigned t391;		/* link integrity verification timer */
+	unsigned t392;		/* polling verification timer */
+	unsigned n391;		/* full status polling cycle counter */
+	unsigned n392;		/* error threshold counter */
+	unsigned n393;		/* monitored events counter */
+	unsigned dlci_num;	/* number of DLCs (access node) */
+	unsigned  dlci[100];    /* List of all DLCIs */
+} wan_fr_conf_t;
+
+/*----------------------------------------------------------------------------
+ * PPP-specific link-level configuration.
+ */
+typedef struct wan_ppp_conf
+{
+	unsigned restart_tmr;	/* restart timer */
+	unsigned auth_rsrt_tmr;	/* authentication timer */
+	unsigned auth_wait_tmr;	/* authentication timer */
+	unsigned mdm_fail_tmr;	/* modem failure timer */
+	unsigned dtr_drop_tmr;	/* DTR drop timer */
+	unsigned connect_tmout;	/* connection timeout */
+	unsigned conf_retry;	/* max. retry */
+	unsigned term_retry;	/* max. retry */
+	unsigned fail_retry;	/* max. retry */
+	unsigned auth_retry;	/* max. retry */
+	unsigned auth_options;	/* authentication opt. */
+	unsigned ip_options;	/* IP options */
+	char	authenticator;	/* AUTHENTICATOR or not */
+	char	ip_mode;	/* Static/Host/Peer */
+} wan_ppp_conf_t;
+
+/*----------------------------------------------------------------------------
+ * CHDLC-specific link-level configuration.
+ */
+typedef struct wan_chdlc_conf
+{
+	unsigned char ignore_dcd;	/* Protocol options:		*/
+	unsigned char ignore_cts;	/*  Ignore these to determine	*/
+	unsigned char ignore_keepalive;	/*  link status (Yes or No)	*/
+	unsigned char hdlc_streaming;	/*  hdlc_streaming mode (Y/N) */
+	unsigned char receive_only;	/*  no transmit buffering (Y/N) */
+	unsigned keepalive_tx_tmr;	/* transmit keepalive timer */
+	unsigned keepalive_rx_tmr;	/* receive  keepalive timer */
+	unsigned keepalive_err_margin;	/* keepalive_error_tolerance */
+	unsigned slarp_timer;		/* SLARP request timer */
+} wan_chdlc_conf_t;
+
+
+/*----------------------------------------------------------------------------
+ * WAN device configuration. Passed to ROUTER_SETUP IOCTL.
+ */
+typedef struct wandev_conf
+{
+	unsigned magic;		/* magic number (for verification) */
+	unsigned config_id;	/* configuration structure identifier */
+				/****** hardware configuration ******/
+	unsigned ioport;	/* adapter I/O port base */
+	unsigned long maddr;	/* dual-port memory address */
+	unsigned msize;		/* dual-port memory size */
+	int irq;		/* interrupt request level */
+	int dma;		/* DMA request level */
+        char S514_CPU_no[1];	/* S514 PCI adapter CPU number ('A' or 'B') */
+        unsigned PCI_slot_no;	/* S514 PCI adapter slot number */
+	char auto_pci_cfg;	/* S515 PCI automatic slot detection */
+	char comm_port;		/* Communication Port (PRI=0, SEC=1) */ 
+	unsigned bps;		/* data transfer rate */
+	unsigned mtu;		/* maximum transmit unit size */
+        unsigned udp_port;      /* UDP port for management */
+	unsigned char ttl;	/* Time To Live for UDP security */
+	unsigned char ft1;	/* FT1 Configurator Option */
+        char interface;		/* RS-232/V.35, etc. */
+	char clocking;		/* external/internal */
+	char line_coding;	/* NRZ/NRZI/FM0/FM1, etc. */
+	char station;		/* DTE/DCE, primary/secondary, etc. */
+	char connection;	/* permanent/switched/on-demand */
+	char read_mode;		/* read mode: Polling or interrupt */
+	char receive_only;	/* disable tx buffers */
+	char tty;		/* Create a fake tty device */
+	unsigned tty_major;	/* Major number for wanpipe tty device */
+	unsigned tty_minor; 	/* Minor number for wanpipe tty device */
+	unsigned tty_mode;	/* TTY operation mode SYNC or ASYNC */
+	char backup;		/* Backup Mode */
+	unsigned hw_opt[4];	/* other hardware options */
+	unsigned reserved[4];
+				/****** arbitrary data ***************/
+	unsigned data_size;	/* data buffer size */
+	void* data;		/* data buffer, e.g. firmware */
+	union			/****** protocol-specific ************/
+	{
+		wan_x25_conf_t x25;	/* X.25 configuration */
+		wan_ppp_conf_t ppp;	/* PPP configuration */
+		wan_fr_conf_t fr;	/* frame relay configuration */
+		wan_chdlc_conf_t chdlc;	/* Cisco HDLC configuration */
+	} u;
+} wandev_conf_t;
+
+/* 'config_id' definitions */
+#define	WANCONFIG_X25	101	/* X.25 link */
+#define	WANCONFIG_FR	102	/* frame relay link */
+#define	WANCONFIG_PPP	103	/* synchronous PPP link */
+#define WANCONFIG_CHDLC	104	/* Cisco HDLC Link */
+#define WANCONFIG_BSC	105	/* BiSync Streaming */
+#define WANCONFIG_HDLC	106	/* HDLC Support */
+#define WANCONFIG_MPPP  107	/* Multi Port PPP over RAW CHDLC */
+
+/*
+ * Configuration options defines.
+ */
+/* general options */
+#define	WANOPT_OFF	0
+#define	WANOPT_ON	1
+#define	WANOPT_NO	0
+#define	WANOPT_YES	1
+
+/* intercace options */
+#define	WANOPT_RS232	0
+#define	WANOPT_V35	1
+
+/* data encoding options */
+#define	WANOPT_NRZ	0
+#define	WANOPT_NRZI	1
+#define	WANOPT_FM0	2
+#define	WANOPT_FM1	3
+
+/* link type options */
+#define	WANOPT_POINTTOPOINT	0	/* RTS always active */
+#define	WANOPT_MULTIDROP	1	/* RTS is active when transmitting */
+
+/* clocking options */
+#define	WANOPT_EXTERNAL	0
+#define	WANOPT_INTERNAL	1
+
+/* station options */
+#define	WANOPT_DTE		0
+#define	WANOPT_DCE		1
+#define	WANOPT_CPE		0
+#define	WANOPT_NODE		1
+#define	WANOPT_SECONDARY	0
+#define	WANOPT_PRIMARY		1
+
+/* connection options */
+#define	WANOPT_PERMANENT	0	/* DTR always active */
+#define	WANOPT_SWITCHED		1	/* use DTR to setup link (dial-up) */
+#define	WANOPT_ONDEMAND		2	/* activate DTR only before sending */
+
+/* frame relay in-channel signalling */
+#define	WANOPT_FR_ANSI		1	/* ANSI T1.617 Annex D */
+#define	WANOPT_FR_Q933		2	/* ITU Q.933A */
+#define	WANOPT_FR_LMI		3	/* LMI */
+
+/* PPP IP Mode Options */
+#define	WANOPT_PPP_STATIC	0
+#define	WANOPT_PPP_HOST		1
+#define	WANOPT_PPP_PEER		2
+
+/* ASY Mode Options */
+#define WANOPT_ONE 		1
+#define WANOPT_TWO		2
+#define WANOPT_ONE_AND_HALF	3
+
+#define WANOPT_NONE	0
+#define WANOPT_ODD      1
+#define WANOPT_EVEN	2
+
+/* CHDLC Protocol Options */
+/* DF Commented out for now.
+
+#define WANOPT_CHDLC_NO_DCD		IGNORE_DCD_FOR_LINK_STAT
+#define WANOPT_CHDLC_NO_CTS		IGNORE_CTS_FOR_LINK_STAT
+#define WANOPT_CHDLC_NO_KEEPALIVE	IGNORE_KPALV_FOR_LINK_STAT
+*/
+
+/* Port options */
+#define WANOPT_PRI 0
+#define WANOPT_SEC 1
+/* read mode */
+#define	WANOPT_INTR	0
+#define WANOPT_POLL	1
+
+
+#define WANOPT_TTY_SYNC  0
+#define WANOPT_TTY_ASYNC 1
+/*----------------------------------------------------------------------------
+ * WAN Link Status Info (for ROUTER_STAT IOCTL).
+ */
+typedef struct wandev_stat
+{
+	unsigned state;		/* link state */
+	unsigned ndev;		/* number of configured interfaces */
+
+	/* link/interface configuration */
+	unsigned connection;	/* permanent/switched/on-demand */
+	unsigned media_type;	/* Frame relay/PPP/X.25/SDLC, etc. */
+	unsigned mtu;		/* max. transmit unit for this device */
+
+	/* physical level statistics */
+	unsigned modem_status;	/* modem status */
+	unsigned rx_frames;	/* received frames count */
+	unsigned rx_overruns;	/* receiver overrun error count */
+	unsigned rx_crc_err;	/* receive CRC error count */
+	unsigned rx_aborts;	/* received aborted frames count */
+	unsigned rx_bad_length;	/* unexpetedly long/short frames count */
+	unsigned rx_dropped;	/* frames discarded at device level */
+	unsigned tx_frames;	/* transmitted frames count */
+	unsigned tx_underruns;	/* aborted transmissions (underruns) count */
+	unsigned tx_timeouts;	/* transmission timeouts */
+	unsigned tx_rejects;	/* other transmit errors */
+
+	/* media level statistics */
+	unsigned rx_bad_format;	/* frames with invalid format */
+	unsigned rx_bad_addr;	/* frames with invalid media address */
+	unsigned tx_retries;	/* frames re-transmitted */
+	unsigned reserved[16];	/* reserved for future use */
+} wandev_stat_t;
+
+/* 'state' defines */
+enum wan_states
+{
+	WAN_UNCONFIGURED,	/* link/channel is not configured */
+	WAN_DISCONNECTED,	/* link/channel is disconnected */
+	WAN_CONNECTING,		/* connection is in progress */
+	WAN_CONNECTED,		/* link/channel is operational */
+	WAN_LIMIT,		/* for verification only */
+	WAN_DUALPORT,		/* for Dual Port cards */
+	WAN_DISCONNECTING,
+	WAN_FT1_READY		/* FT1 Configurator Ready */
+};
+
+enum {
+	WAN_LOCAL_IP,
+	WAN_POINTOPOINT_IP,
+	WAN_NETMASK_IP,
+	WAN_BROADCAST_IP
+};
+
+/* 'modem_status' masks */
+#define	WAN_MODEM_CTS	0x0001	/* CTS line active */
+#define	WAN_MODEM_DCD	0x0002	/* DCD line active */
+#define	WAN_MODEM_DTR	0x0010	/* DTR line active */
+#define	WAN_MODEM_RTS	0x0020	/* RTS line active */
+
+/*----------------------------------------------------------------------------
+ * WAN interface (logical channel) configuration (for ROUTER_IFNEW IOCTL).
+ */
+typedef struct wanif_conf
+{
+	unsigned magic;			/* magic number */
+	unsigned config_id;		/* configuration identifier */
+	char name[WAN_IFNAME_SZ+1];	/* interface name, ASCIIZ */
+	char addr[WAN_ADDRESS_SZ+1];	/* media address, ASCIIZ */
+	char usedby[USED_BY_FIELD];	/* used by API or WANPIPE */
+	unsigned idle_timeout;		/* sec, before disconnecting */
+	unsigned hold_timeout;		/* sec, before re-connecting */
+	unsigned cir;			/* Committed Information Rate fwd,bwd*/
+	unsigned bc;			/* Committed Burst Size fwd, bwd */
+	unsigned be;			/* Excess Burst Size fwd, bwd */ 
+	unsigned char enable_IPX;	/* Enable or Disable IPX */
+	unsigned char inarp;		/* Send Inverse ARP requests Y/N */
+	unsigned inarp_interval;	/* sec, between InARP requests */
+	unsigned long network_number;	/* Network Number for IPX */
+	char mc;			/* Multicast on or off */
+	char local_addr[WAN_ADDRESS_SZ+1];/* local media address, ASCIIZ */
+	unsigned char port;		/* board port */
+	unsigned char protocol;		/* prococol used in this channel (TCPOX25 or X25) */
+	char pap;			/* PAP enabled or disabled */
+	char chap;			/* CHAP enabled or disabled */
+	unsigned char userid[511];	/* List of User Id */
+	unsigned char passwd[511];	/* List of passwords */
+	unsigned char sysname[31];	/* Name of the system */
+	unsigned char ignore_dcd;	/* Protocol options: */
+	unsigned char ignore_cts;	/*  Ignore these to determine */
+	unsigned char ignore_keepalive;	/*  link status (Yes or No) */
+	unsigned char hdlc_streaming;	/*  Hdlc streaming mode (Y/N) */
+	unsigned keepalive_tx_tmr;	/* transmit keepalive timer */
+	unsigned keepalive_rx_tmr;	/* receive  keepalive timer */
+	unsigned keepalive_err_margin;	/* keepalive_error_tolerance */
+	unsigned slarp_timer;		/* SLARP request timer */
+	unsigned char ttl;		/* Time To Live for UDP security */
+	char interface;			/* RS-232/V.35, etc. */
+	char clocking;			/* external/internal */
+	unsigned bps;			/* data transfer rate */
+	unsigned mtu;			/* maximum transmit unit size */
+	unsigned char if_down;		/* brind down interface when disconnected */
+	unsigned char gateway;		/* Is this interface a gateway */
+	unsigned char true_if_encoding;	/* Set the dev->type to true board protocol */
+
+	unsigned char asy_data_trans;     /* async API options */
+        unsigned char rts_hs_for_receive; /* async Protocol options */
+        unsigned char xon_xoff_hs_for_receive;
+	unsigned char xon_xoff_hs_for_transmit;
+	unsigned char dcd_hs_for_transmit;
+	unsigned char cts_hs_for_transmit;
+	unsigned char async_mode;
+	unsigned tx_bits_per_char;
+	unsigned rx_bits_per_char;
+	unsigned stop_bits;  
+	unsigned char parity;
+ 	unsigned break_timer;
+        unsigned inter_char_timer;
+	unsigned rx_complete_length;
+	unsigned xon_char;
+	unsigned xoff_char;
+	unsigned char receive_only;	/*  no transmit buffering (Y/N) */
+} wanif_conf_t;
+
+#ifdef	__KERNEL__
+/****** Kernel Interface ****************************************************/
+
+#include <linux/fs.h>		/* support for device drivers */
+#include <linux/proc_fs.h>	/* proc filesystem pragmatics */
+#include <linux/netdevice.h>	/* support for network drivers */
+#include <linux/spinlock.h>     /* Support for SMP Locking */
+
+/*----------------------------------------------------------------------------
+ * WAN device data space.
+ */
+struct wan_device {
+	unsigned magic;			/* magic number */
+	char* name;			/* -> WAN device name (ASCIIZ) */
+	void* private;			/* -> driver private data */
+	unsigned config_id;		/* Configuration ID */
+					/****** hardware configuration ******/
+	unsigned ioport;		/* adapter I/O port base #1 */
+	char S514_cpu_no[1];		/* PCI CPU Number */
+	unsigned char S514_slot_no;	/* PCI Slot Number */
+	unsigned long maddr;		/* dual-port memory address */
+	unsigned msize;			/* dual-port memory size */
+	int irq;			/* interrupt request level */
+	int dma;			/* DMA request level */
+	unsigned bps;			/* data transfer rate */
+	unsigned mtu;			/* max physical transmit unit size */
+	unsigned udp_port;              /* UDP port for management */
+        unsigned char ttl;		/* Time To Live for UDP security */
+	unsigned enable_tx_int; 	/* Transmit Interrupt enabled or not */
+	char interface;			/* RS-232/V.35, etc. */
+	char clocking;			/* external/internal */
+	char line_coding;		/* NRZ/NRZI/FM0/FM1, etc. */
+	char station;			/* DTE/DCE, primary/secondary, etc. */
+	char connection;		/* permanent/switched/on-demand */
+	char signalling;		/* Signalling RS232 or V35 */
+	char read_mode;			/* read mode: Polling or interrupt */
+	char new_if_cnt;                /* Number of interfaces per wanpipe */ 
+	char del_if_cnt;		/* Number of times del_if() gets called */
+	unsigned char piggyback;        /* Piggibacking a port */
+	unsigned hw_opt[4];		/* other hardware options */
+					/****** status and statistics *******/
+	char state;			/* device state */
+	char api_status;		/* device api status */
+	struct net_device_stats stats; 	/* interface statistics */
+	unsigned reserved[16];		/* reserved for future use */
+	unsigned long critical;		/* critical section flag */
+	spinlock_t lock;                /* Support for SMP Locking */
+
+					/****** device management methods ***/
+	int (*setup) (struct wan_device *wandev, wandev_conf_t *conf);
+	int (*shutdown) (struct wan_device *wandev);
+	int (*update) (struct wan_device *wandev);
+	int (*ioctl) (struct wan_device *wandev, unsigned cmd,
+		unsigned long arg);
+	int (*new_if)(struct wan_device *wandev, struct net_device *dev,
+		      wanif_conf_t *conf);
+	int (*del_if)(struct wan_device *wandev, struct net_device *dev);
+					/****** maintained by the router ****/
+	struct wan_device* next;	/* -> next device */
+	struct net_device* dev;		/* list of network interfaces */
+	unsigned ndev;			/* number of interfaces */
+	struct proc_dir_entry *dent;	/* proc filesystem entry */
+};
+
+/* Public functions available for device drivers */
+extern int register_wan_device(struct wan_device *wandev);
+extern int unregister_wan_device(char *name);
+
+/* Proc interface functions. These must not be called by the drivers! */
+extern int wanrouter_proc_init(void);
+extern void wanrouter_proc_cleanup(void);
+extern int wanrouter_proc_add(struct wan_device *wandev);
+extern int wanrouter_proc_delete(struct wan_device *wandev);
+extern long wanrouter_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
+
+/* Public Data */
+/* list of registered devices */
+extern struct wan_device *wanrouter_router_devlist;
+
+#endif	/* __KERNEL__ */
+#endif	/* _ROUTER_H */
diff --git a/include/linux/watchdog.h b/include/linux/watchdog.h
new file mode 100644
index 00000000..ac40716b
--- /dev/null
+++ b/include/linux/watchdog.h
@@ -0,0 +1,155 @@
+/*
+ *	Generic watchdog defines. Derived from..
+ *
+ * Berkshire PC Watchdog Defines
+ * by Ken Hollis <khollis@bitgate.com>
+ *
+ */
+
+#ifndef _LINUX_WATCHDOG_H
+#define _LINUX_WATCHDOG_H
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+#define	WATCHDOG_IOCTL_BASE	'W'
+
+struct watchdog_info {
+	__u32 options;		/* Options the card/driver supports */
+	__u32 firmware_version;	/* Firmware version of the card */
+	__u8  identity[32];	/* Identity of the board */
+};
+
+#define	WDIOC_GETSUPPORT	_IOR(WATCHDOG_IOCTL_BASE, 0, struct watchdog_info)
+#define	WDIOC_GETSTATUS		_IOR(WATCHDOG_IOCTL_BASE, 1, int)
+#define	WDIOC_GETBOOTSTATUS	_IOR(WATCHDOG_IOCTL_BASE, 2, int)
+#define	WDIOC_GETTEMP		_IOR(WATCHDOG_IOCTL_BASE, 3, int)
+#define	WDIOC_SETOPTIONS	_IOR(WATCHDOG_IOCTL_BASE, 4, int)
+#define	WDIOC_KEEPALIVE		_IOR(WATCHDOG_IOCTL_BASE, 5, int)
+#define	WDIOC_SETTIMEOUT        _IOWR(WATCHDOG_IOCTL_BASE, 6, int)
+#define	WDIOC_GETTIMEOUT        _IOR(WATCHDOG_IOCTL_BASE, 7, int)
+#define	WDIOC_SETPRETIMEOUT	_IOWR(WATCHDOG_IOCTL_BASE, 8, int)
+#define	WDIOC_GETPRETIMEOUT	_IOR(WATCHDOG_IOCTL_BASE, 9, int)
+#define	WDIOC_GETTIMELEFT	_IOR(WATCHDOG_IOCTL_BASE, 10, int)
+
+#define	WDIOF_UNKNOWN		-1	/* Unknown flag error */
+#define	WDIOS_UNKNOWN		-1	/* Unknown status error */
+
+#define	WDIOF_OVERHEAT		0x0001	/* Reset due to CPU overheat */
+#define	WDIOF_FANFAULT		0x0002	/* Fan failed */
+#define	WDIOF_EXTERN1		0x0004	/* External relay 1 */
+#define	WDIOF_EXTERN2		0x0008	/* External relay 2 */
+#define	WDIOF_POWERUNDER	0x0010	/* Power bad/power fault */
+#define	WDIOF_CARDRESET		0x0020	/* Card previously reset the CPU */
+#define	WDIOF_POWEROVER		0x0040	/* Power over voltage */
+#define	WDIOF_SETTIMEOUT	0x0080  /* Set timeout (in seconds) */
+#define	WDIOF_MAGICCLOSE	0x0100	/* Supports magic close char */
+#define	WDIOF_PRETIMEOUT	0x0200  /* Pretimeout (in seconds), get/set */
+#define	WDIOF_KEEPALIVEPING	0x8000	/* Keep alive ping reply */
+
+#define	WDIOS_DISABLECARD	0x0001	/* Turn off the watchdog timer */
+#define	WDIOS_ENABLECARD	0x0002	/* Turn on the watchdog timer */
+#define	WDIOS_TEMPPANIC		0x0004	/* Kernel panic on temperature trip */
+
+#ifdef __KERNEL__
+
+#include <linux/bitops.h>
+
+struct watchdog_ops;
+struct watchdog_device;
+
+/** struct watchdog_ops - The watchdog-devices operations
+ *
+ * @owner:	The module owner.
+ * @start:	The routine for starting the watchdog device.
+ * @stop:	The routine for stopping the watchdog device.
+ * @ping:	The routine that sends a keepalive ping to the watchdog device.
+ * @status:	The routine that shows the status of the watchdog device.
+ * @set_timeout:The routine for setting the watchdog devices timeout value.
+ * @get_timeleft:The routine that get's the time that's left before a reset.
+ * @ioctl:	The routines that handles extra ioctl calls.
+ *
+ * The watchdog_ops structure contains a list of low-level operations
+ * that control a watchdog device. It also contains the module that owns
+ * these operations. The start and stop function are mandatory, all other
+ * functions are optonal.
+ */
+struct watchdog_ops {
+	struct module *owner;
+	/* mandatory operations */
+	int (*start)(struct watchdog_device *);
+	int (*stop)(struct watchdog_device *);
+	/* optional operations */
+	int (*ping)(struct watchdog_device *);
+	unsigned int (*status)(struct watchdog_device *);
+	int (*set_timeout)(struct watchdog_device *, unsigned int);
+	unsigned int (*get_timeleft)(struct watchdog_device *);
+	long (*ioctl)(struct watchdog_device *, unsigned int, unsigned long);
+};
+
+/** struct watchdog_device - The structure that defines a watchdog device
+ *
+ * @info:	Pointer to a watchdog_info structure.
+ * @ops:	Pointer to the list of watchdog operations.
+ * @bootstatus:	Status of the watchdog device at boot.
+ * @timeout:	The watchdog devices timeout value.
+ * @min_timeout:The watchdog devices minimum timeout value.
+ * @max_timeout:The watchdog devices maximum timeout value.
+ * @driver-data:Pointer to the drivers private data.
+ * @status:	Field that contains the devices internal status bits.
+ *
+ * The watchdog_device structure contains all information about a
+ * watchdog timer device.
+ *
+ * The driver-data field may not be accessed directly. It must be accessed
+ * via the watchdog_set_drvdata and watchdog_get_drvdata helpers.
+ */
+struct watchdog_device {
+	const struct watchdog_info *info;
+	const struct watchdog_ops *ops;
+	unsigned int bootstatus;
+	unsigned int timeout;
+	unsigned int min_timeout;
+	unsigned int max_timeout;
+	void *driver_data;
+	unsigned long status;
+/* Bit numbers for status flags */
+#define WDOG_ACTIVE		0	/* Is the watchdog running/active */
+#define WDOG_DEV_OPEN		1	/* Opened via /dev/watchdog ? */
+#define WDOG_ALLOW_RELEASE	2	/* Did we receive the magic char ? */
+#define WDOG_NO_WAY_OUT		3	/* Is 'nowayout' feature set ? */
+};
+
+#ifdef CONFIG_WATCHDOG_NOWAYOUT
+#define WATCHDOG_NOWAYOUT		1
+#define WATCHDOG_NOWAYOUT_INIT_STATUS	(1 << WDOG_NO_WAY_OUT)
+#else
+#define WATCHDOG_NOWAYOUT		0
+#define WATCHDOG_NOWAYOUT_INIT_STATUS	0
+#endif
+
+/* Use the following function to set the nowayout feature */
+static inline void watchdog_set_nowayout(struct watchdog_device *wdd, bool nowayout)
+{
+	if (nowayout)
+		set_bit(WDOG_NO_WAY_OUT, &wdd->status);
+}
+
+/* Use the following functions to manipulate watchdog driver specific data */
+static inline void watchdog_set_drvdata(struct watchdog_device *wdd, void *data)
+{
+	wdd->driver_data = data;
+}
+
+static inline void *watchdog_get_drvdata(struct watchdog_device *wdd)
+{
+	return wdd->driver_data;
+}
+
+/* drivers/watchdog/core/watchdog_core.c */
+extern int watchdog_register_device(struct watchdog_device *);
+extern void watchdog_unregister_device(struct watchdog_device *);
+
+#endif	/* __KERNEL__ */
+
+#endif  /* ifndef _LINUX_WATCHDOG_H */
diff --git a/include/linux/wifi_tiwlan.h b/include/linux/wifi_tiwlan.h
new file mode 100644
index 00000000..f07e0679
--- /dev/null
+++ b/include/linux/wifi_tiwlan.h
@@ -0,0 +1,27 @@
+/* include/linux/wifi_tiwlan.h
+ *
+ * Copyright (C) 2008 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef _LINUX_WIFI_TIWLAN_H_
+#define _LINUX_WIFI_TIWLAN_H_
+
+#include <linux/wlan_plat.h>
+
+#define WMPA_NUMBER_OF_SECTIONS	3
+#define WMPA_NUMBER_OF_BUFFERS	160
+#define WMPA_SECTION_HEADER	24
+#define WMPA_SECTION_SIZE_0	(WMPA_NUMBER_OF_BUFFERS * 64)
+#define WMPA_SECTION_SIZE_1	(WMPA_NUMBER_OF_BUFFERS * 256)
+#define WMPA_SECTION_SIZE_2	(WMPA_NUMBER_OF_BUFFERS * 2048)
+
+#endif
diff --git a/include/linux/wimax.h b/include/linux/wimax.h
new file mode 100644
index 00000000..9f6b77af
--- /dev/null
+++ b/include/linux/wimax.h
@@ -0,0 +1,239 @@
+/*
+ * Linux WiMax
+ * API for user space
+ *
+ *
+ * Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <linux-wimax@intel.com>
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *  - Initial implementation
+ *
+ *
+ * This file declares the user/kernel protocol that is spoken over
+ * Generic Netlink, as well as any type declaration that is to be used
+ * by kernel and user space.
+ *
+ * It is intended for user space to clone it verbatim to use it as a
+ * primary reference for definitions.
+ *
+ * Stuff intended for kernel usage as well as full protocol and stack
+ * documentation is rooted in include/net/wimax.h.
+ */
+
+#ifndef __LINUX__WIMAX_H__
+#define __LINUX__WIMAX_H__
+
+#include <linux/types.h>
+
+enum {
+	/**
+	 * Version of the interface (unsigned decimal, MMm, max 25.5)
+	 * M - Major: change if removing or modifying an existing call.
+	 * m - minor: change when adding a new call
+	 */
+	WIMAX_GNL_VERSION = 01,
+	/* Generic NetLink attributes */
+	WIMAX_GNL_ATTR_INVALID = 0x00,
+	WIMAX_GNL_ATTR_MAX = 10,
+};
+
+
+/*
+ * Generic NetLink operations
+ *
+ * Most of these map to an API call; _OP_ stands for operation, _RP_
+ * for reply and _RE_ for report (aka: signal).
+ */
+enum {
+	WIMAX_GNL_OP_MSG_FROM_USER,	/* User to kernel message */
+	WIMAX_GNL_OP_MSG_TO_USER,	/* Kernel to user message */
+	WIMAX_GNL_OP_RFKILL,	/* Run wimax_rfkill() */
+	WIMAX_GNL_OP_RESET,	/* Run wimax_rfkill() */
+	WIMAX_GNL_RE_STATE_CHANGE,	/* Report: status change */
+	WIMAX_GNL_OP_STATE_GET,		/* Request for current state */
+};
+
+
+/* Message from user / to user */
+enum {
+	WIMAX_GNL_MSG_IFIDX = 1,
+	WIMAX_GNL_MSG_PIPE_NAME,
+	WIMAX_GNL_MSG_DATA,
+};
+
+
+/*
+ * wimax_rfkill()
+ *
+ * The state of the radio (ON/OFF) is mapped to the rfkill subsystem's
+ * switch state (DISABLED/ENABLED).
+ */
+enum wimax_rf_state {
+	WIMAX_RF_OFF = 0,	/* Radio is off, rfkill on/enabled */
+	WIMAX_RF_ON = 1,	/* Radio is on, rfkill off/disabled */
+	WIMAX_RF_QUERY = 2,
+};
+
+/* Attributes */
+enum {
+	WIMAX_GNL_RFKILL_IFIDX = 1,
+	WIMAX_GNL_RFKILL_STATE,
+};
+
+
+/* Attributes for wimax_reset() */
+enum {
+	WIMAX_GNL_RESET_IFIDX = 1,
+};
+
+/* Attributes for wimax_state_get() */
+enum {
+	WIMAX_GNL_STGET_IFIDX = 1,
+};
+
+/*
+ * Attributes for the Report State Change
+ *
+ * For now we just have the old and new states; new attributes might
+ * be added later on.
+ */
+enum {
+	WIMAX_GNL_STCH_IFIDX = 1,
+	WIMAX_GNL_STCH_STATE_OLD,
+	WIMAX_GNL_STCH_STATE_NEW,
+};
+
+
+/**
+ * enum wimax_st - The different states of a WiMAX device
+ * @__WIMAX_ST_NULL: The device structure has been allocated and zeroed,
+ *     but still wimax_dev_add() hasn't been called. There is no state.
+ *
+ * @WIMAX_ST_DOWN: The device has been registered with the WiMAX and
+ *     networking stacks, but it is not initialized (normally that is
+ *     done with 'ifconfig DEV up' [or equivalent], which can upload
+ *     firmware and enable communications with the device).
+ *     In this state, the device is powered down and using as less
+ *     power as possible.
+ *     This state is the default after a call to wimax_dev_add(). It
+ *     is ok to have drivers move directly to %WIMAX_ST_UNINITIALIZED
+ *     or %WIMAX_ST_RADIO_OFF in _probe() after the call to
+ *     wimax_dev_add().
+ *     It is recommended that the driver leaves this state when
+ *     calling 'ifconfig DEV up' and enters it back on 'ifconfig DEV
+ *     down'.
+ *
+ * @__WIMAX_ST_QUIESCING: The device is being torn down, so no API
+ *     operations are allowed to proceed except the ones needed to
+ *     complete the device clean up process.
+ *
+ * @WIMAX_ST_UNINITIALIZED: [optional] Communication with the device
+ *     is setup, but the device still requires some configuration
+ *     before being operational.
+ *     Some WiMAX API calls might work.
+ *
+ * @WIMAX_ST_RADIO_OFF: The device is fully up; radio is off (wether
+ *     by hardware or software switches).
+ *     It is recommended to always leave the device in this state
+ *     after initialization.
+ *
+ * @WIMAX_ST_READY: The device is fully up and radio is on.
+ *
+ * @WIMAX_ST_SCANNING: [optional] The device has been instructed to
+ *     scan. In this state, the device cannot be actively connected to
+ *     a network.
+ *
+ * @WIMAX_ST_CONNECTING: The device is connecting to a network. This
+ *     state exists because in some devices, the connect process can
+ *     include a number of negotiations between user space, kernel
+ *     space and the device. User space needs to know what the device
+ *     is doing. If the connect sequence in a device is atomic and
+ *     fast, the device can transition directly to CONNECTED
+ *
+ * @WIMAX_ST_CONNECTED: The device is connected to a network.
+ *
+ * @__WIMAX_ST_INVALID: This is an invalid state used to mark the
+ *     maximum numeric value of states.
+ *
+ * Description:
+ *
+ * Transitions from one state to another one are atomic and can only
+ * be caused in kernel space with wimax_state_change(). To read the
+ * state, use wimax_state_get().
+ *
+ * States starting with __ are internal and shall not be used or
+ * referred to by drivers or userspace. They look ugly, but that's the
+ * point -- if any use is made non-internal to the stack, it is easier
+ * to catch on review.
+ *
+ * All API operations [with well defined exceptions] will take the
+ * device mutex before starting and then check the state. If the state
+ * is %__WIMAX_ST_NULL, %WIMAX_ST_DOWN, %WIMAX_ST_UNINITIALIZED or
+ * %__WIMAX_ST_QUIESCING, it will drop the lock and quit with
+ * -%EINVAL, -%ENOMEDIUM, -%ENOTCONN or -%ESHUTDOWN.
+ *
+ * The order of the definitions is important, so we can do numerical
+ * comparisons (eg: < %WIMAX_ST_RADIO_OFF means the device is not ready
+ * to operate).
+ */
+/*
+ * The allowed state transitions are described in the table below
+ * (states in rows can go to states in columns where there is an X):
+ *
+ *                                  UNINI   RADIO READY SCAN CONNEC CONNEC
+ *             NULL DOWN QUIESCING TIALIZED  OFF        NING  TING   TED
+ * NULL         -    x
+ * DOWN              -      x        x       x
+ * QUIESCING         x      -
+ * UNINITIALIZED            x        -       x
+ * RADIO_OFF                x                -     x
+ * READY                    x                x     -     x     x      x
+ * SCANNING                 x                x     x     -     x      x
+ * CONNECTING               x                x     x     x     -      x
+ * CONNECTED                x                x     x                  -
+ *
+ * This table not available in kernel-doc because the formatting messes it up.
+ */
+ enum wimax_st {
+	__WIMAX_ST_NULL = 0,
+	WIMAX_ST_DOWN,
+	__WIMAX_ST_QUIESCING,
+	WIMAX_ST_UNINITIALIZED,
+	WIMAX_ST_RADIO_OFF,
+	WIMAX_ST_READY,
+	WIMAX_ST_SCANNING,
+	WIMAX_ST_CONNECTING,
+	WIMAX_ST_CONNECTED,
+	__WIMAX_ST_INVALID			/* Always keep last */
+};
+
+
+#endif /* #ifndef __LINUX__WIMAX_H__ */
diff --git a/include/linux/wimax/Kbuild b/include/linux/wimax/Kbuild
new file mode 100644
index 00000000..3cb4f269
--- /dev/null
+++ b/include/linux/wimax/Kbuild
@@ -0,0 +1 @@
+header-y += i2400m.h
diff --git a/include/linux/wimax/debug.h b/include/linux/wimax/debug.h
new file mode 100644
index 00000000..aaf24ba1
--- /dev/null
+++ b/include/linux/wimax/debug.h
@@ -0,0 +1,526 @@
+/*
+ * Linux WiMAX
+ * Collection of tools to manage debug operations.
+ *
+ *
+ * Copyright (C) 2005-2007 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Don't #include this file directly, read on!
+ *
+ *
+ * EXECUTING DEBUGGING ACTIONS OR NOT
+ *
+ * The main thing this framework provides is decission power to take a
+ * debug action (like printing a message) if the current debug level
+ * allows it.
+ *
+ * The decission power is at two levels: at compile-time (what does
+ * not make it is compiled out) and at run-time. The run-time
+ * selection is done per-submodule (as they are declared by the user
+ * of the framework).
+ *
+ * A call to d_test(L) (L being the target debug level) returns true
+ * if the action should be taken because the current debug levels
+ * allow it (both compile and run time).
+ *
+ * It follows that a call to d_test() that can be determined to be
+ * always false at compile time will get the code depending on it
+ * compiled out by optimization.
+ *
+ *
+ * DEBUG LEVELS
+ *
+ * It is up to the caller to define how much a debugging level is.
+ *
+ * Convention sets 0 as "no debug" (so an action marked as debug level 0
+ * will always be taken). The increasing debug levels are used for
+ * increased verbosity.
+ *
+ *
+ * USAGE
+ *
+ * Group the code in modules and submodules inside each module [which
+ * in most cases maps to Linux modules and .c files that compose
+ * those].
+ *
+ *
+ * For each module, there is:
+ *
+ *  - a MODULENAME (single word, legal C identifier)
+ *
+ *  - a debug-levels.h header file that declares the list of
+ *    submodules and that is included by all .c files that use
+ *    the debugging tools. The file name can be anything.
+ *
+ *  - some (optional) .c code to manipulate the runtime debug levels
+ *    through debugfs.
+ *
+ * The debug-levels.h file would look like:
+ *
+ *     #ifndef __debug_levels__h__
+ *     #define __debug_levels__h__
+ *
+ *     #define D_MODULENAME modulename
+ *     #define D_MASTER 10
+ *
+ *     #include <linux/wimax/debug.h>
+ *
+ *     enum d_module {
+ *             D_SUBMODULE_DECLARE(submodule_1),
+ *             D_SUBMODULE_DECLARE(submodule_2),
+ *             ...
+ *             D_SUBMODULE_DECLARE(submodule_N)
+ *     };
+ *
+ *     #endif
+ *
+ * D_MASTER is the maximum compile-time debug level; any debug actions
+ * above this will be out. D_MODULENAME is the module name (legal C
+ * identifier), which has to be unique for each module (to avoid
+ * namespace collisions during linkage). Note those #defines need to
+ * be done before #including debug.h
+ *
+ * We declare N different submodules whose debug level can be
+ * independently controlled during runtime.
+ *
+ * In a .c file of the module (and only in one of them), define the
+ * following code:
+ *
+ *     struct d_level D_LEVEL[] = {
+ *             D_SUBMODULE_DEFINE(submodule_1),
+ *             D_SUBMODULE_DEFINE(submodule_2),
+ *             ...
+ *             D_SUBMODULE_DEFINE(submodule_N),
+ *     };
+ *     size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL);
+ *
+ * Externs for d_level_MODULENAME and d_level_size_MODULENAME are used
+ * and declared in this file using the D_LEVEL and D_LEVEL_SIZE macros
+ * #defined also in this file.
+ *
+ * To manipulate from user space the levels, create a debugfs dentry
+ * and then register each submodule with:
+ *
+ *     result = d_level_register_debugfs("PREFIX_", submodule_X, parent);
+ *     if (result < 0)
+ *            goto error;
+ *
+ * Where PREFIX_ is a name of your chosing. This will create debugfs
+ * file with a single numeric value that can be use to tweak it. To
+ * remove the entires, just use debugfs_remove_recursive() on 'parent'.
+ *
+ * NOTE: remember that even if this will show attached to some
+ *     particular instance of a device, the settings are *global*.
+ *
+ *
+ * On each submodule (for example, .c files), the debug infrastructure
+ * should be included like this:
+ *
+ *     #define D_SUBMODULE submodule_x     // matches one in debug-levels.h
+ *     #include "debug-levels.h"
+ *
+ * after #including all your include files.
+ *
+ *
+ * Now you can use the d_*() macros below [d_test(), d_fnstart(),
+ * d_fnend(), d_printf(), d_dump()].
+ *
+ * If their debug level is greater than D_MASTER, they will be
+ * compiled out.
+ *
+ * If their debug level is lower or equal than D_MASTER but greater
+ * than the current debug level of their submodule, they'll be
+ * ignored.
+ *
+ * Otherwise, the action will be performed.
+ */
+#ifndef __debug__h__
+#define __debug__h__
+
+#include <linux/types.h>
+#include <linux/slab.h>
+
+struct device;
+
+/* Backend stuff */
+
+/*
+ * Debug backend: generate a message header from a 'struct device'
+ *
+ * @head: buffer where to place the header
+ * @head_size: length of @head
+ * @dev: pointer to device used to generate a header from. If NULL,
+ *     an empty ("") header is generated.
+ */
+static inline
+void __d_head(char *head, size_t head_size,
+	      struct device *dev)
+{
+	if (dev == NULL)
+		head[0] = 0;
+	else if ((unsigned long)dev < 4096) {
+		printk(KERN_ERR "E: Corrupt dev %p\n", dev);
+		WARN_ON(1);
+	} else
+		snprintf(head, head_size, "%s %s: ",
+			 dev_driver_string(dev), dev_name(dev));
+}
+
+
+/*
+ * Debug backend: log some message if debugging is enabled
+ *
+ * @l: intended debug level
+ * @tag: tag to prefix the message with
+ * @dev: 'struct device' associated to this message
+ * @f: printf-like format and arguments
+ *
+ * Note this is optimized out if it doesn't pass the compile-time
+ * check; however, it is *always* compiled. This is useful to make
+ * sure the printf-like formats and variables are always checked and
+ * they don't get bit rot if you have all the debugging disabled.
+ */
+#define _d_printf(l, tag, dev, f, a...)					\
+do {									\
+	char head[64];							\
+	if (!d_test(l))							\
+		break;							\
+	__d_head(head, sizeof(head), dev);				\
+	printk(KERN_ERR "%s%s%s: " f, head, __func__, tag, ##a);	\
+} while (0)
+
+
+/*
+ * CPP sintatic sugar to generate A_B like symbol names when one of
+ * the arguments is a a preprocessor #define.
+ */
+#define __D_PASTE__(varname, modulename) varname##_##modulename
+#define __D_PASTE(varname, modulename) (__D_PASTE__(varname, modulename))
+#define _D_SUBMODULE_INDEX(_name) (D_SUBMODULE_DECLARE(_name))
+
+
+/*
+ * Store a submodule's runtime debug level and name
+ */
+struct d_level {
+	u8 level;
+	const char *name;
+};
+
+
+/*
+ * List of available submodules and their debug levels
+ *
+ * We call them d_level_MODULENAME and d_level_size_MODULENAME; the
+ * macros D_LEVEL and D_LEVEL_SIZE contain the name already for
+ * convenience.
+ *
+ * This array and the size are defined on some .c file that is part of
+ * the current module.
+ */
+#define D_LEVEL __D_PASTE(d_level, D_MODULENAME)
+#define D_LEVEL_SIZE __D_PASTE(d_level_size, D_MODULENAME)
+
+extern struct d_level D_LEVEL[];
+extern size_t D_LEVEL_SIZE;
+
+
+/*
+ * Frontend stuff
+ *
+ *
+ * Stuff you need to declare prior to using the actual "debug" actions
+ * (defined below).
+ */
+
+#ifndef D_MODULENAME
+#error D_MODULENAME is not defined in your debug-levels.h file
+/**
+ * D_MODULE - Name of the current module
+ *
+ * #define in your module's debug-levels.h, making sure it is
+ * unique. This has to be a legal C identifier.
+ */
+#define D_MODULENAME undefined_modulename
+#endif
+
+
+#ifndef D_MASTER
+#warning D_MASTER not defined, but debug.h included! [see docs]
+/**
+ * D_MASTER - Compile time maximum debug level
+ *
+ * #define in your debug-levels.h file to the maximum debug level the
+ * runtime code will be allowed to have. This allows you to provide a
+ * main knob.
+ *
+ * Anything above that level will be optimized out of the compile.
+ *
+ * Defaults to zero (no debug code compiled in).
+ *
+ * Maximum one definition per module (at the debug-levels.h file).
+ */
+#define D_MASTER 0
+#endif
+
+#ifndef D_SUBMODULE
+#error D_SUBMODULE not defined, but debug.h included! [see docs]
+/**
+ * D_SUBMODULE - Name of the current submodule
+ *
+ * #define in your submodule .c file before #including debug-levels.h
+ * to the name of the current submodule as previously declared and
+ * defined with D_SUBMODULE_DECLARE() (in your module's
+ * debug-levels.h) and D_SUBMODULE_DEFINE().
+ *
+ * This is used to provide runtime-control over the debug levels.
+ *
+ * Maximum one per .c file! Can be shared among different .c files
+ * (meaning they belong to the same submodule categorization).
+ */
+#define D_SUBMODULE undefined_module
+#endif
+
+
+/**
+ * D_SUBMODULE_DECLARE - Declare a submodule for runtime debug level control
+ *
+ * @_name: name of the submodule, restricted to the chars that make up a
+ *     valid C identifier ([a-zA-Z0-9_]).
+ *
+ * Declare in the module's debug-levels.h header file as:
+ *
+ * enum d_module {
+ *         D_SUBMODULE_DECLARE(submodule_1),
+ *         D_SUBMODULE_DECLARE(submodule_2),
+ *         D_SUBMODULE_DECLARE(submodule_3),
+ * };
+ *
+ * Some corresponding .c file needs to have a matching
+ * D_SUBMODULE_DEFINE().
+ */
+#define D_SUBMODULE_DECLARE(_name) __D_SUBMODULE_##_name
+
+
+/**
+ * D_SUBMODULE_DEFINE - Define a submodule for runtime debug level control
+ *
+ * @_name: name of the submodule, restricted to the chars that make up a
+ *     valid C identifier ([a-zA-Z0-9_]).
+ *
+ * Use once per module (in some .c file) as:
+ *
+ * static
+ * struct d_level d_level_SUBMODULENAME[] = {
+ *         D_SUBMODULE_DEFINE(submodule_1),
+ *         D_SUBMODULE_DEFINE(submodule_2),
+ *         D_SUBMODULE_DEFINE(submodule_3),
+ * };
+ * size_t d_level_size_SUBDMODULENAME = ARRAY_SIZE(d_level_SUBDMODULENAME);
+ *
+ * Matching D_SUBMODULE_DECLARE()s have to be present in a
+ * debug-levels.h header file.
+ */
+#define D_SUBMODULE_DEFINE(_name)		\
+[__D_SUBMODULE_##_name] = {			\
+	.level = 0,				\
+	.name = #_name				\
+}
+
+
+
+/* The actual "debug" operations */
+
+
+/**
+ * d_test - Returns true if debugging should be enabled
+ *
+ * @l: intended debug level (unsigned)
+ *
+ * If the master debug switch is enabled and the current settings are
+ * higher or equal to the requested level, then debugging
+ * output/actions should be enabled.
+ *
+ * NOTE:
+ *
+ * This needs to be coded so that it can be evaluated in compile
+ * time; this is why the ugly BUG_ON() is placed in there, so the
+ * D_MASTER evaluation compiles all out if it is compile-time false.
+ */
+#define d_test(l)							\
+({									\
+	unsigned __l = l;	/* type enforcer */			\
+	(D_MASTER) >= __l						\
+	&& ({								\
+		BUG_ON(_D_SUBMODULE_INDEX(D_SUBMODULE) >= D_LEVEL_SIZE);\
+		D_LEVEL[_D_SUBMODULE_INDEX(D_SUBMODULE)].level >= __l;	\
+	});								\
+})
+
+
+/**
+ * d_fnstart - log message at function start if debugging enabled
+ *
+ * @l: intended debug level
+ * @_dev: 'struct device' pointer, NULL if none (for context)
+ * @f: printf-like format and arguments
+ */
+#define d_fnstart(l, _dev, f, a...) _d_printf(l, " FNSTART", _dev, f, ## a)
+
+
+/**
+ * d_fnend - log message at function end if debugging enabled
+ *
+ * @l: intended debug level
+ * @_dev: 'struct device' pointer, NULL if none (for context)
+ * @f: printf-like format and arguments
+ */
+#define d_fnend(l, _dev, f, a...) _d_printf(l, " FNEND", _dev, f, ## a)
+
+
+/**
+ * d_printf - log message if debugging enabled
+ *
+ * @l: intended debug level
+ * @_dev: 'struct device' pointer, NULL if none (for context)
+ * @f: printf-like format and arguments
+ */
+#define d_printf(l, _dev, f, a...) _d_printf(l, "", _dev, f, ## a)
+
+
+/**
+ * d_dump - log buffer hex dump if debugging enabled
+ *
+ * @l: intended debug level
+ * @_dev: 'struct device' pointer, NULL if none (for context)
+ * @f: printf-like format and arguments
+ */
+#define d_dump(l, dev, ptr, size)			\
+do {							\
+	char head[64];					\
+	if (!d_test(l))					\
+		break;					\
+	__d_head(head, sizeof(head), dev);		\
+	print_hex_dump(KERN_ERR, head, 0, 16, 1,	\
+		       ((void *) ptr), (size), 0);	\
+} while (0)
+
+
+/**
+ * Export a submodule's debug level over debugfs as PREFIXSUBMODULE
+ *
+ * @prefix: string to prefix the name with
+ * @submodule: name of submodule (not a string, just the name)
+ * @dentry: debugfs parent dentry
+ *
+ * Returns: 0 if ok, < 0 errno on error.
+ *
+ * For removing, just use debugfs_remove_recursive() on the parent.
+ */
+#define d_level_register_debugfs(prefix, name, parent)			\
+({									\
+	int rc;								\
+	struct dentry *fd;						\
+	struct dentry *verify_parent_type = parent;			\
+	fd = debugfs_create_u8(						\
+		prefix #name, 0600, verify_parent_type,			\
+		&(D_LEVEL[__D_SUBMODULE_ ## name].level));		\
+	rc = PTR_ERR(fd);						\
+	if (IS_ERR(fd) && rc != -ENODEV)				\
+		printk(KERN_ERR "%s: Can't create debugfs entry %s: "	\
+		       "%d\n", __func__, prefix #name, rc);		\
+	else								\
+		rc = 0;							\
+	rc;								\
+})
+
+
+static inline
+void d_submodule_set(struct d_level *d_level, size_t d_level_size,
+		     const char *submodule, u8 level, const char *tag)
+{
+	struct d_level *itr, *top;
+	int index = -1;
+
+	for (itr = d_level, top = itr + d_level_size; itr < top; itr++) {
+		index++;
+		if (itr->name == NULL) {
+			printk(KERN_ERR "%s: itr->name NULL?? (%p, #%d)\n",
+			       tag, itr, index);
+			continue;
+		}
+		if (!strcmp(itr->name, submodule)) {
+			itr->level = level;
+			return;
+		}
+	}
+	printk(KERN_ERR "%s: unknown submodule %s\n", tag, submodule);
+}
+
+
+/**
+ * d_parse_params - Parse a string with debug parameters from the
+ * command line
+ *
+ * @d_level: level structure (D_LEVEL)
+ * @d_level_size: number of items in the level structure
+ *     (D_LEVEL_SIZE).
+ * @_params: string with the parameters; this is a space (not tab!)
+ *     separated list of NAME:VALUE, where value is the debug level
+ *     and NAME is the name of the submodule.
+ * @tag: string for error messages (example: MODULE.ARGNAME).
+ */
+static inline
+void d_parse_params(struct d_level *d_level, size_t d_level_size,
+		    const char *_params, const char *tag)
+{
+	char submodule[130], *params, *params_orig, *token, *colon;
+	unsigned level, tokens;
+
+	if (_params == NULL)
+		return;
+	params_orig = kstrdup(_params, GFP_KERNEL);
+	params = params_orig;
+	while (1) {
+		token = strsep(&params, " ");
+		if (token == NULL)
+			break;
+		if (*token == '\0')	/* eat joint spaces */
+			continue;
+		/* kernel's sscanf %s eats until whitespace, so we
+		 * replace : by \n so it doesn't get eaten later by
+		 * strsep */
+		colon = strchr(token, ':');
+		if (colon != NULL)
+			*colon = '\n';
+		tokens = sscanf(token, "%s\n%u", submodule, &level);
+		if (colon != NULL)
+			*colon = ':';	/* set back, for error messages */
+		if (tokens == 2)
+			d_submodule_set(d_level, d_level_size,
+					submodule, level, tag);
+		else
+			printk(KERN_ERR "%s: can't parse '%s' as a "
+			       "SUBMODULE:LEVEL (%d tokens)\n",
+			       tag, token, tokens);
+	}
+	kfree(params_orig);
+}
+
+#endif /* #ifndef __debug__h__ */
diff --git a/include/linux/wimax/i2400m.h b/include/linux/wimax/i2400m.h
new file mode 100644
index 00000000..62d35615
--- /dev/null
+++ b/include/linux/wimax/i2400m.h
@@ -0,0 +1,572 @@
+/*
+ * Intel Wireless WiMax Connection 2400m
+ * Host-Device protocol interface definitions
+ *
+ *
+ * Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <linux-wimax@intel.com>
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *  - Initial implementation
+ *
+ *
+ * This header defines the data structures and constants used to
+ * communicate with the device.
+ *
+ * BOOTMODE/BOOTROM/FIRMWARE UPLOAD PROTOCOL
+ *
+ * The firmware upload protocol is quite simple and only requires a
+ * handful of commands. See drivers/net/wimax/i2400m/fw.c for more
+ * details.
+ *
+ * The BCF data structure is for the firmware file header.
+ *
+ *
+ * THE DATA / CONTROL PROTOCOL
+ *
+ * This is the normal protocol spoken with the device once the
+ * firmware is uploaded. It transports data payloads and control
+ * messages back and forth.
+ *
+ * It consists 'messages' that pack one or more payloads each. The
+ * format is described in detail in drivers/net/wimax/i2400m/rx.c and
+ * tx.c.
+ *
+ *
+ * THE L3L4 PROTOCOL
+ *
+ * The term L3L4 refers to Layer 3 (the device), Layer 4 (the
+ * driver/host software).
+ *
+ * This is the control protocol used by the host to control the i2400m
+ * device (scan, connect, disconnect...). This is sent to / received
+ * as control frames. These frames consist of a header and zero or
+ * more TLVs with information. We call each control frame a "message".
+ *
+ * Each message is composed of:
+ *
+ * HEADER
+ * [TLV0 + PAYLOAD0]
+ * [TLV1 + PAYLOAD1]
+ * [...]
+ * [TLVN + PAYLOADN]
+ *
+ * The HEADER is defined by 'struct i2400m_l3l4_hdr'. The payloads are
+ * defined by a TLV structure (Type Length Value) which is a 'header'
+ * (struct i2400m_tlv_hdr) and then the payload.
+ *
+ * All integers are represented as Little Endian.
+ *
+ * - REQUESTS AND EVENTS
+ *
+ * The requests can be clasified as follows:
+ *
+ *   COMMAND:  implies a request from the host to the device requesting
+ *             an action being performed. The device will reply with a
+ *             message (with the same type as the command), status and
+ *             no (TLV) payload. Execution of a command might cause
+ *             events (of different type) to be sent later on as
+ *             device's state changes.
+ *
+ *   GET/SET:  similar to COMMAND, but will not cause other
+ *             EVENTs. The reply, in the case of GET, will contain
+ *             TLVs with the requested information.
+ *
+ *   EVENT:    asynchronous messages sent from the device, maybe as a
+ *             consequence of previous COMMANDs but disassociated from
+ *             them.
+ *
+ * Only one request might be pending at the same time (ie: don't
+ * parallelize nor post another GET request before the previous
+ * COMMAND has been acknowledged with it's corresponding reply by the
+ * device).
+ *
+ * The different requests and their formats are described below:
+ *
+ *  I2400M_MT_*   Message types
+ *  I2400M_MS_*   Message status (for replies, events)
+ *  i2400m_tlv_*  TLVs
+ *
+ * data types are named 'struct i2400m_msg_OPNAME', OPNAME matching the
+ * operation.
+ */
+
+#ifndef __LINUX__WIMAX__I2400M_H__
+#define __LINUX__WIMAX__I2400M_H__
+
+#include <linux/types.h>
+
+
+/*
+ * Host Device Interface (HDI) common to all busses
+ */
+
+/* Boot-mode (firmware upload mode) commands */
+
+/* Header for the firmware file */
+struct i2400m_bcf_hdr {
+	__le32 module_type;
+	__le32 header_len;
+	__le32 header_version;
+	__le32 module_id;
+	__le32 module_vendor;
+	__le32 date;		/* BCD YYYMMDD */
+	__le32 size;            /* in dwords */
+	__le32 key_size;	/* in dwords */
+	__le32 modulus_size;	/* in dwords */
+	__le32 exponent_size;	/* in dwords */
+	__u8 reserved[88];
+} __attribute__ ((packed));
+
+/* Boot mode opcodes */
+enum i2400m_brh_opcode {
+	I2400M_BRH_READ = 1,
+	I2400M_BRH_WRITE = 2,
+	I2400M_BRH_JUMP = 3,
+	I2400M_BRH_SIGNED_JUMP = 8,
+	I2400M_BRH_HASH_PAYLOAD_ONLY = 9,
+};
+
+/* Boot mode command masks and stuff */
+enum i2400m_brh {
+	I2400M_BRH_SIGNATURE = 0xcbbc0000,
+	I2400M_BRH_SIGNATURE_MASK = 0xffff0000,
+	I2400M_BRH_SIGNATURE_SHIFT = 16,
+	I2400M_BRH_OPCODE_MASK = 0x0000000f,
+	I2400M_BRH_RESPONSE_MASK = 0x000000f0,
+	I2400M_BRH_RESPONSE_SHIFT = 4,
+	I2400M_BRH_DIRECT_ACCESS = 0x00000400,
+	I2400M_BRH_RESPONSE_REQUIRED = 0x00000200,
+	I2400M_BRH_USE_CHECKSUM = 0x00000100,
+};
+
+
+/**
+ * i2400m_bootrom_header - Header for a boot-mode command
+ *
+ * @cmd: the above command descriptor
+ * @target_addr: where on the device memory should the action be performed.
+ * @data_size: for read/write, amount of data to be read/written
+ * @block_checksum: checksum value (if applicable)
+ * @payload: the beginning of data attached to this header
+ */
+struct i2400m_bootrom_header {
+	__le32 command;		/* Compose with enum i2400_brh */
+	__le32 target_addr;
+	__le32 data_size;
+	__le32 block_checksum;
+	char payload[0];
+} __attribute__ ((packed));
+
+
+/*
+ * Data / control protocol
+ */
+
+/* Packet types for the host-device interface */
+enum i2400m_pt {
+	I2400M_PT_DATA = 0,
+	I2400M_PT_CTRL,
+	I2400M_PT_TRACE,	/* For device debug */
+	I2400M_PT_RESET_WARM,	/* device reset */
+	I2400M_PT_RESET_COLD,	/* USB[transport] reset, like reconnect */
+	I2400M_PT_EDATA,	/* Extended RX data */
+	I2400M_PT_ILLEGAL
+};
+
+
+/*
+ * Payload for a data packet
+ *
+ * This is prefixed to each and every outgoing DATA type.
+ */
+struct i2400m_pl_data_hdr {
+	__le32 reserved;
+} __attribute__((packed));
+
+
+/*
+ * Payload for an extended data packet
+ *
+ * New in fw v1.4
+ *
+ * @reorder: if this payload has to be reorder or not (and how)
+ * @cs: the type of data in the packet, as defined per (802.16e
+ *     T11.13.19.1). Currently only 2 (IPv4 packet) supported.
+ *
+ * This is prefixed to each and every INCOMING DATA packet.
+ */
+struct i2400m_pl_edata_hdr {
+	__le32 reorder;		/* bits defined in i2400m_ro */
+	__u8 cs;
+	__u8 reserved[11];
+} __attribute__((packed));
+
+enum i2400m_cs {
+	I2400M_CS_IPV4_0 = 0,
+	I2400M_CS_IPV4 = 2,
+};
+
+enum i2400m_ro {
+	I2400M_RO_NEEDED     = 0x01,
+	I2400M_RO_TYPE       = 0x03,
+	I2400M_RO_TYPE_SHIFT = 1,
+	I2400M_RO_CIN        = 0x0f,
+	I2400M_RO_CIN_SHIFT  = 4,
+	I2400M_RO_FBN        = 0x07ff,
+	I2400M_RO_FBN_SHIFT  = 8,
+	I2400M_RO_SN         = 0x07ff,
+	I2400M_RO_SN_SHIFT   = 21,
+};
+
+enum i2400m_ro_type {
+	I2400M_RO_TYPE_RESET = 0,
+	I2400M_RO_TYPE_PACKET,
+	I2400M_RO_TYPE_WS,
+	I2400M_RO_TYPE_PACKET_WS,
+};
+
+
+/* Misc constants */
+enum {
+	I2400M_PL_ALIGN = 16,	/* Payload data size alignment */
+	I2400M_PL_SIZE_MAX = 0x3EFF,
+	I2400M_MAX_PLS_IN_MSG = 60,
+	/* protocol barkers: sync sequences; for notifications they
+	 * are sent in groups of four. */
+	I2400M_H2D_PREVIEW_BARKER = 0xcafe900d,
+	I2400M_COLD_RESET_BARKER = 0xc01dc01d,
+	I2400M_WARM_RESET_BARKER = 0x50f750f7,
+	I2400M_NBOOT_BARKER = 0xdeadbeef,
+	I2400M_SBOOT_BARKER = 0x0ff1c1a1,
+	I2400M_SBOOT_BARKER_6050 = 0x80000001,
+	I2400M_ACK_BARKER = 0xfeedbabe,
+	I2400M_D2H_MSG_BARKER = 0xbeefbabe,
+};
+
+
+/*
+ * Hardware payload descriptor
+ *
+ * Bitfields encoded in a struct to enforce typing semantics.
+ *
+ * Look in rx.c and tx.c for a full description of the format.
+ */
+struct i2400m_pld {
+	__le32 val;
+} __attribute__ ((packed));
+
+#define I2400M_PLD_SIZE_MASK 0x00003fff
+#define I2400M_PLD_TYPE_SHIFT 16
+#define I2400M_PLD_TYPE_MASK 0x000f0000
+
+/*
+ * Header for a TX message or RX message
+ *
+ * @barker: preamble
+ * @size: used for management of the FIFO queue buffer; before
+ *     sending, this is converted to be a real preamble. This
+ *     indicates the real size of the TX message that starts at this
+ *     point. If the highest bit is set, then this message is to be
+ *     skipped.
+ * @sequence: sequence number of this message
+ * @offset: offset where the message itself starts -- see the comments
+ *     in the file header about message header and payload descriptor
+ *     alignment.
+ * @num_pls: number of payloads in this message
+ * @padding: amount of padding bytes at the end of the message to make
+ *           it be of block-size aligned
+ *
+ * Look in rx.c and tx.c for a full description of the format.
+ */
+struct i2400m_msg_hdr {
+	union {
+		__le32 barker;
+		__u32 size;	/* same size type as barker!! */
+	};
+	union {
+		__le32 sequence;
+		__u32 offset;	/* same size type as barker!! */
+	};
+	__le16 num_pls;
+	__le16 rsv1;
+	__le16 padding;
+	__le16 rsv2;
+	struct i2400m_pld pld[0];
+} __attribute__ ((packed));
+
+
+
+/*
+ * L3/L4 control protocol
+ */
+
+enum {
+	/* Interface version */
+	I2400M_L3L4_VERSION             = 0x0100,
+};
+
+/* Message types */
+enum i2400m_mt {
+	I2400M_MT_RESERVED              = 0x0000,
+	I2400M_MT_INVALID               = 0xffff,
+	I2400M_MT_REPORT_MASK		= 0x8000,
+
+	I2400M_MT_GET_SCAN_RESULT  	= 0x4202,
+	I2400M_MT_SET_SCAN_PARAM   	= 0x4402,
+	I2400M_MT_CMD_RF_CONTROL   	= 0x4602,
+	I2400M_MT_CMD_SCAN         	= 0x4603,
+	I2400M_MT_CMD_CONNECT      	= 0x4604,
+	I2400M_MT_CMD_DISCONNECT   	= 0x4605,
+	I2400M_MT_CMD_EXIT_IDLE   	= 0x4606,
+	I2400M_MT_GET_LM_VERSION   	= 0x5201,
+	I2400M_MT_GET_DEVICE_INFO  	= 0x5202,
+	I2400M_MT_GET_LINK_STATUS  	= 0x5203,
+	I2400M_MT_GET_STATISTICS   	= 0x5204,
+	I2400M_MT_GET_STATE        	= 0x5205,
+	I2400M_MT_GET_MEDIA_STATUS	= 0x5206,
+	I2400M_MT_SET_INIT_CONFIG	= 0x5404,
+	I2400M_MT_CMD_INIT	        = 0x5601,
+	I2400M_MT_CMD_TERMINATE		= 0x5602,
+	I2400M_MT_CMD_MODE_OF_OP	= 0x5603,
+	I2400M_MT_CMD_RESET_DEVICE	= 0x5604,
+	I2400M_MT_CMD_MONITOR_CONTROL   = 0x5605,
+	I2400M_MT_CMD_ENTER_POWERSAVE   = 0x5606,
+	I2400M_MT_GET_TLS_OPERATION_RESULT = 0x6201,
+	I2400M_MT_SET_EAP_SUCCESS       = 0x6402,
+	I2400M_MT_SET_EAP_FAIL          = 0x6403,
+	I2400M_MT_SET_EAP_KEY          	= 0x6404,
+	I2400M_MT_CMD_SEND_EAP_RESPONSE = 0x6602,
+	I2400M_MT_REPORT_SCAN_RESULT    = 0xc002,
+	I2400M_MT_REPORT_STATE		= 0xd002,
+	I2400M_MT_REPORT_POWERSAVE_READY = 0xd005,
+	I2400M_MT_REPORT_EAP_REQUEST    = 0xe002,
+	I2400M_MT_REPORT_EAP_RESTART    = 0xe003,
+	I2400M_MT_REPORT_ALT_ACCEPT    	= 0xe004,
+	I2400M_MT_REPORT_KEY_REQUEST 	= 0xe005,
+};
+
+
+/*
+ * Message Ack Status codes
+ *
+ * When a message is replied-to, this status is reported.
+ */
+enum i2400m_ms {
+	I2400M_MS_DONE_OK                  = 0,
+	I2400M_MS_DONE_IN_PROGRESS         = 1,
+	I2400M_MS_INVALID_OP               = 2,
+	I2400M_MS_BAD_STATE                = 3,
+	I2400M_MS_ILLEGAL_VALUE            = 4,
+	I2400M_MS_MISSING_PARAMS           = 5,
+	I2400M_MS_VERSION_ERROR            = 6,
+	I2400M_MS_ACCESSIBILITY_ERROR      = 7,
+	I2400M_MS_BUSY                     = 8,
+	I2400M_MS_CORRUPTED_TLV            = 9,
+	I2400M_MS_UNINITIALIZED            = 10,
+	I2400M_MS_UNKNOWN_ERROR            = 11,
+	I2400M_MS_PRODUCTION_ERROR         = 12,
+	I2400M_MS_NO_RF                    = 13,
+	I2400M_MS_NOT_READY_FOR_POWERSAVE  = 14,
+	I2400M_MS_THERMAL_CRITICAL         = 15,
+	I2400M_MS_MAX
+};
+
+
+/**
+ * i2400m_tlv - enumeration of the different types of TLVs
+ *
+ * TLVs stand for type-length-value and are the header for a payload
+ * composed of almost anything. Each payload has a type assigned
+ * and a length.
+ */
+enum i2400m_tlv {
+	I2400M_TLV_L4_MESSAGE_VERSIONS = 129,
+	I2400M_TLV_SYSTEM_STATE = 141,
+	I2400M_TLV_MEDIA_STATUS = 161,
+	I2400M_TLV_RF_OPERATION = 162,
+	I2400M_TLV_RF_STATUS = 163,
+	I2400M_TLV_DEVICE_RESET_TYPE = 132,
+	I2400M_TLV_CONFIG_IDLE_PARAMETERS = 601,
+	I2400M_TLV_CONFIG_IDLE_TIMEOUT = 611,
+	I2400M_TLV_CONFIG_D2H_DATA_FORMAT = 614,
+	I2400M_TLV_CONFIG_DL_HOST_REORDER = 615,
+};
+
+
+struct i2400m_tlv_hdr {
+	__le16 type;
+	__le16 length;		/* payload's */
+	__u8   pl[0];
+} __attribute__((packed));
+
+
+struct i2400m_l3l4_hdr {
+	__le16 type;
+	__le16 length;		/* payload's */
+	__le16 version;
+	__le16 resv1;
+	__le16 status;
+	__le16 resv2;
+	struct i2400m_tlv_hdr pl[0];
+} __attribute__((packed));
+
+
+/**
+ * i2400m_system_state - different states of the device
+ */
+enum i2400m_system_state {
+	I2400M_SS_UNINITIALIZED = 1,
+	I2400M_SS_INIT,
+	I2400M_SS_READY,
+	I2400M_SS_SCAN,
+	I2400M_SS_STANDBY,
+	I2400M_SS_CONNECTING,
+	I2400M_SS_WIMAX_CONNECTED,
+	I2400M_SS_DATA_PATH_CONNECTED,
+	I2400M_SS_IDLE,
+	I2400M_SS_DISCONNECTING,
+	I2400M_SS_OUT_OF_ZONE,
+	I2400M_SS_SLEEPACTIVE,
+	I2400M_SS_PRODUCTION,
+	I2400M_SS_CONFIG,
+	I2400M_SS_RF_OFF,
+	I2400M_SS_RF_SHUTDOWN,
+	I2400M_SS_DEVICE_DISCONNECT,
+	I2400M_SS_MAX,
+};
+
+
+/**
+ * i2400m_tlv_system_state - report on the state of the system
+ *
+ * @state: see enum i2400m_system_state
+ */
+struct i2400m_tlv_system_state {
+	struct i2400m_tlv_hdr hdr;
+	__le32 state;
+} __attribute__((packed));
+
+
+struct i2400m_tlv_l4_message_versions {
+	struct i2400m_tlv_hdr hdr;
+	__le16 major;
+	__le16 minor;
+	__le16 branch;
+	__le16 reserved;
+} __attribute__((packed));
+
+
+struct i2400m_tlv_detailed_device_info {
+	struct i2400m_tlv_hdr hdr;
+	__u8 reserved1[400];
+	__u8 mac_address[6];
+	__u8 reserved2[2];
+} __attribute__((packed));
+
+
+enum i2400m_rf_switch_status {
+	I2400M_RF_SWITCH_ON = 1,
+	I2400M_RF_SWITCH_OFF = 2,
+};
+
+struct i2400m_tlv_rf_switches_status {
+	struct i2400m_tlv_hdr hdr;
+	__u8 sw_rf_switch;	/* 1 ON, 2 OFF */
+	__u8 hw_rf_switch;	/* 1 ON, 2 OFF */
+	__u8 reserved[2];
+} __attribute__((packed));
+
+
+enum {
+	i2400m_rf_operation_on = 1,
+	i2400m_rf_operation_off = 2
+};
+
+struct i2400m_tlv_rf_operation {
+	struct i2400m_tlv_hdr hdr;
+	__le32 status;	/* 1 ON, 2 OFF */
+} __attribute__((packed));
+
+
+enum i2400m_tlv_reset_type {
+	I2400M_RESET_TYPE_COLD = 1,
+	I2400M_RESET_TYPE_WARM
+};
+
+struct i2400m_tlv_device_reset_type {
+	struct i2400m_tlv_hdr hdr;
+	__le32 reset_type;
+} __attribute__((packed));
+
+
+struct i2400m_tlv_config_idle_parameters {
+	struct i2400m_tlv_hdr hdr;
+	__le32 idle_timeout;	/* 100 to 300000 ms [5min], 100 increments
+				 * 0 disabled */
+	__le32 idle_paging_interval;	/* frames */
+} __attribute__((packed));
+
+
+enum i2400m_media_status {
+	I2400M_MEDIA_STATUS_LINK_UP = 1,
+	I2400M_MEDIA_STATUS_LINK_DOWN,
+	I2400M_MEDIA_STATUS_LINK_RENEW,
+};
+
+struct i2400m_tlv_media_status {
+	struct i2400m_tlv_hdr hdr;
+	__le32 media_status;
+} __attribute__((packed));
+
+
+/* New in v1.4 */
+struct i2400m_tlv_config_idle_timeout {
+	struct i2400m_tlv_hdr hdr;
+	__le32 timeout;	/* 100 to 300000 ms [5min], 100 increments
+			 * 0 disabled */
+} __attribute__((packed));
+
+/* New in v1.4 -- for backward compat, will be removed */
+struct i2400m_tlv_config_d2h_data_format {
+	struct i2400m_tlv_hdr hdr;
+	__u8 format; 		/* 0 old format, 1 enhanced */
+	__u8 reserved[3];
+} __attribute__((packed));
+
+/* New in v1.4 */
+struct i2400m_tlv_config_dl_host_reorder {
+	struct i2400m_tlv_hdr hdr;
+	__u8 reorder; 		/* 0 disabled, 1 enabled */
+	__u8 reserved[3];
+} __attribute__((packed));
+
+
+#endif /* #ifndef __LINUX__WIMAX__I2400M_H__ */
diff --git a/include/linux/wireless.h b/include/linux/wireless.h
new file mode 100644
index 00000000..4395b28b
--- /dev/null
+++ b/include/linux/wireless.h
@@ -0,0 +1,1162 @@
+/*
+ * This file define a set of standard wireless extensions
+ *
+ * Version :	22	16.3.07
+ *
+ * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
+ * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved.
+ */
+
+#ifndef _LINUX_WIRELESS_H
+#define _LINUX_WIRELESS_H
+
+/************************** DOCUMENTATION **************************/
+/*
+ * Initial APIs (1996 -> onward) :
+ * -----------------------------
+ * Basically, the wireless extensions are for now a set of standard ioctl
+ * call + /proc/net/wireless
+ *
+ * The entry /proc/net/wireless give statistics and information on the
+ * driver.
+ * This is better than having each driver having its entry because
+ * its centralised and we may remove the driver module safely.
+ *
+ * Ioctl are used to configure the driver and issue commands.  This is
+ * better than command line options of insmod because we may want to
+ * change dynamically (while the driver is running) some parameters.
+ *
+ * The ioctl mechanimsm are copied from standard devices ioctl.
+ * We have the list of command plus a structure descibing the
+ * data exchanged...
+ * Note that to add these ioctl, I was obliged to modify :
+ *	# net/core/dev.c (two place + add include)
+ *	# net/ipv4/af_inet.c (one place + add include)
+ *
+ * /proc/net/wireless is a copy of /proc/net/dev.
+ * We have a structure for data passed from the driver to /proc/net/wireless
+ * Too add this, I've modified :
+ *	# net/core/dev.c (two other places)
+ *	# include/linux/netdevice.h (one place)
+ *	# include/linux/proc_fs.h (one place)
+ *
+ * New driver API (2002 -> onward) :
+ * -------------------------------
+ * This file is only concerned with the user space API and common definitions.
+ * The new driver API is defined and documented in :
+ *	# include/net/iw_handler.h
+ *
+ * Note as well that /proc/net/wireless implementation has now moved in :
+ *	# net/core/wireless.c
+ *
+ * Wireless Events (2002 -> onward) :
+ * --------------------------------
+ * Events are defined at the end of this file, and implemented in :
+ *	# net/core/wireless.c
+ *
+ * Other comments :
+ * --------------
+ * Do not add here things that are redundant with other mechanisms
+ * (drivers init, ifconfig, /proc/net/dev, ...) and with are not
+ * wireless specific.
+ *
+ * These wireless extensions are not magic : each driver has to provide
+ * support for them...
+ *
+ * IMPORTANT NOTE : As everything in the kernel, this is very much a
+ * work in progress. Contact me if you have ideas of improvements...
+ */
+
+/***************************** INCLUDES *****************************/
+
+#include <linux/types.h>		/* for __u* and __s* typedefs */
+#include <linux/socket.h>		/* for "struct sockaddr" et al	*/
+#include <linux/if.h>			/* for IFNAMSIZ and co... */
+
+/***************************** VERSION *****************************/
+/*
+ * This constant is used to know the availability of the wireless
+ * extensions and to know which version of wireless extensions it is
+ * (there is some stuff that will be added in the future...)
+ * I just plan to increment with each new version.
+ */
+#define WIRELESS_EXT	22
+
+/*
+ * Changes :
+ *
+ * V2 to V3
+ * --------
+ *	Alan Cox start some incompatibles changes. I've integrated a bit more.
+ *	- Encryption renamed to Encode to avoid US regulation problems
+ *	- Frequency changed from float to struct to avoid problems on old 386
+ *
+ * V3 to V4
+ * --------
+ *	- Add sensitivity
+ *
+ * V4 to V5
+ * --------
+ *	- Missing encoding definitions in range
+ *	- Access points stuff
+ *
+ * V5 to V6
+ * --------
+ *	- 802.11 support (ESSID ioctls)
+ *
+ * V6 to V7
+ * --------
+ *	- define IW_ESSID_MAX_SIZE and IW_MAX_AP
+ *
+ * V7 to V8
+ * --------
+ *	- Changed my e-mail address
+ *	- More 802.11 support (nickname, rate, rts, frag)
+ *	- List index in frequencies
+ *
+ * V8 to V9
+ * --------
+ *	- Support for 'mode of operation' (ad-hoc, managed...)
+ *	- Support for unicast and multicast power saving
+ *	- Change encoding to support larger tokens (>64 bits)
+ *	- Updated iw_params (disable, flags) and use it for NWID
+ *	- Extracted iw_point from iwreq for clarity
+ *
+ * V9 to V10
+ * ---------
+ *	- Add PM capability to range structure
+ *	- Add PM modifier : MAX/MIN/RELATIVE
+ *	- Add encoding option : IW_ENCODE_NOKEY
+ *	- Add TxPower ioctls (work like TxRate)
+ *
+ * V10 to V11
+ * ----------
+ *	- Add WE version in range (help backward/forward compatibility)
+ *	- Add retry ioctls (work like PM)
+ *
+ * V11 to V12
+ * ----------
+ *	- Add SIOCSIWSTATS to get /proc/net/wireless programatically
+ *	- Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space
+ *	- Add new statistics (frag, retry, beacon)
+ *	- Add average quality (for user space calibration)
+ *
+ * V12 to V13
+ * ----------
+ *	- Document creation of new driver API.
+ *	- Extract union iwreq_data from struct iwreq (for new driver API).
+ *	- Rename SIOCSIWNAME as SIOCSIWCOMMIT
+ *
+ * V13 to V14
+ * ----------
+ *	- Wireless Events support : define struct iw_event
+ *	- Define additional specific event numbers
+ *	- Add "addr" and "param" fields in union iwreq_data
+ *	- AP scanning stuff (SIOCSIWSCAN and friends)
+ *
+ * V14 to V15
+ * ----------
+ *	- Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg
+ *	- Make struct iw_freq signed (both m & e), add explicit padding
+ *	- Add IWEVCUSTOM for driver specific event/scanning token
+ *	- Add IW_MAX_GET_SPY for driver returning a lot of addresses
+ *	- Add IW_TXPOW_RANGE for range of Tx Powers
+ *	- Add IWEVREGISTERED & IWEVEXPIRED events for Access Points
+ *	- Add IW_MODE_MONITOR for passive monitor
+ *
+ * V15 to V16
+ * ----------
+ *	- Increase the number of bitrates in iw_range to 32 (for 802.11g)
+ *	- Increase the number of frequencies in iw_range to 32 (for 802.11b+a)
+ *	- Reshuffle struct iw_range for increases, add filler
+ *	- Increase IW_MAX_AP to 64 for driver returning a lot of addresses
+ *	- Remove IW_MAX_GET_SPY because conflict with enhanced spy support
+ *	- Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy"
+ *	- Add IW_ENCODE_TEMP and iw_range->encoding_login_index
+ *
+ * V16 to V17
+ * ----------
+ *	- Add flags to frequency -> auto/fixed
+ *	- Document (struct iw_quality *)->updated, add new flags (INVALID)
+ *	- Wireless Event capability in struct iw_range
+ *	- Add support for relative TxPower (yick !)
+ *
+ * V17 to V18 (From Jouni Malinen <j@w1.fi>)
+ * ----------
+ *	- Add support for WPA/WPA2
+ *	- Add extended encoding configuration (SIOCSIWENCODEEXT and
+ *	  SIOCGIWENCODEEXT)
+ *	- Add SIOCSIWGENIE/SIOCGIWGENIE
+ *	- Add SIOCSIWMLME
+ *	- Add SIOCSIWPMKSA
+ *	- Add struct iw_range bit field for supported encoding capabilities
+ *	- Add optional scan request parameters for SIOCSIWSCAN
+ *	- Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA
+ *	  related parameters (extensible up to 4096 parameter values)
+ *	- Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE,
+ *	  IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND
+ *
+ * V18 to V19
+ * ----------
+ *	- Remove (struct iw_point *)->pointer from events and streams
+ *	- Remove header includes to help user space
+ *	- Increase IW_ENCODING_TOKEN_MAX from 32 to 64
+ *	- Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros
+ *	- Add explicit flag to tell stats are in dBm : IW_QUAL_DBM
+ *	- Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros
+ *
+ * V19 to V20
+ * ----------
+ *	- RtNetlink requests support (SET/GET)
+ *
+ * V20 to V21
+ * ----------
+ *	- Remove (struct net_device *)->get_wireless_stats()
+ *	- Change length in ESSID and NICK to strlen() instead of strlen()+1
+ *	- Add IW_RETRY_SHORT/IW_RETRY_LONG retry modifiers
+ *	- Power/Retry relative values no longer * 100000
+ *	- Add explicit flag to tell stats are in 802.11k RCPI : IW_QUAL_RCPI
+ *
+ * V21 to V22
+ * ----------
+ *	- Prevent leaking of kernel space in stream on 64 bits.
+ */
+
+/**************************** CONSTANTS ****************************/
+
+/* -------------------------- IOCTL LIST -------------------------- */
+
+/* Wireless Identification */
+#define SIOCSIWCOMMIT	0x8B00		/* Commit pending changes to driver */
+#define SIOCGIWNAME	0x8B01		/* get name == wireless protocol */
+/* SIOCGIWNAME is used to verify the presence of Wireless Extensions.
+ * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"...
+ * Don't put the name of your driver there, it's useless. */
+
+/* Basic operations */
+#define SIOCSIWNWID	0x8B02		/* set network id (pre-802.11) */
+#define SIOCGIWNWID	0x8B03		/* get network id (the cell) */
+#define SIOCSIWFREQ	0x8B04		/* set channel/frequency (Hz) */
+#define SIOCGIWFREQ	0x8B05		/* get channel/frequency (Hz) */
+#define SIOCSIWMODE	0x8B06		/* set operation mode */
+#define SIOCGIWMODE	0x8B07		/* get operation mode */
+#define SIOCSIWSENS	0x8B08		/* set sensitivity (dBm) */
+#define SIOCGIWSENS	0x8B09		/* get sensitivity (dBm) */
+
+/* Informative stuff */
+#define SIOCSIWRANGE	0x8B0A		/* Unused */
+#define SIOCGIWRANGE	0x8B0B		/* Get range of parameters */
+#define SIOCSIWPRIV	0x8B0C		/* Unused */
+#define SIOCGIWPRIV	0x8B0D		/* get private ioctl interface info */
+#define SIOCSIWSTATS	0x8B0E		/* Unused */
+#define SIOCGIWSTATS	0x8B0F		/* Get /proc/net/wireless stats */
+/* SIOCGIWSTATS is strictly used between user space and the kernel, and
+ * is never passed to the driver (i.e. the driver will never see it). */
+
+/* Spy support (statistics per MAC address - used for Mobile IP support) */
+#define SIOCSIWSPY	0x8B10		/* set spy addresses */
+#define SIOCGIWSPY	0x8B11		/* get spy info (quality of link) */
+#define SIOCSIWTHRSPY	0x8B12		/* set spy threshold (spy event) */
+#define SIOCGIWTHRSPY	0x8B13		/* get spy threshold */
+
+/* Access Point manipulation */
+#define SIOCSIWAP	0x8B14		/* set access point MAC addresses */
+#define SIOCGIWAP	0x8B15		/* get access point MAC addresses */
+#define SIOCGIWAPLIST	0x8B17		/* Deprecated in favor of scanning */
+#define SIOCSIWSCAN	0x8B18		/* trigger scanning (list cells) */
+#define SIOCGIWSCAN	0x8B19		/* get scanning results */
+
+/* 802.11 specific support */
+#define SIOCSIWESSID	0x8B1A		/* set ESSID (network name) */
+#define SIOCGIWESSID	0x8B1B		/* get ESSID */
+#define SIOCSIWNICKN	0x8B1C		/* set node name/nickname */
+#define SIOCGIWNICKN	0x8B1D		/* get node name/nickname */
+/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit
+ * within the 'iwreq' structure, so we need to use the 'data' member to
+ * point to a string in user space, like it is done for RANGE... */
+
+/* Other parameters useful in 802.11 and some other devices */
+#define SIOCSIWRATE	0x8B20		/* set default bit rate (bps) */
+#define SIOCGIWRATE	0x8B21		/* get default bit rate (bps) */
+#define SIOCSIWRTS	0x8B22		/* set RTS/CTS threshold (bytes) */
+#define SIOCGIWRTS	0x8B23		/* get RTS/CTS threshold (bytes) */
+#define SIOCSIWFRAG	0x8B24		/* set fragmentation thr (bytes) */
+#define SIOCGIWFRAG	0x8B25		/* get fragmentation thr (bytes) */
+#define SIOCSIWTXPOW	0x8B26		/* set transmit power (dBm) */
+#define SIOCGIWTXPOW	0x8B27		/* get transmit power (dBm) */
+#define SIOCSIWRETRY	0x8B28		/* set retry limits and lifetime */
+#define SIOCGIWRETRY	0x8B29		/* get retry limits and lifetime */
+
+/* Encoding stuff (scrambling, hardware security, WEP...) */
+#define SIOCSIWENCODE	0x8B2A		/* set encoding token & mode */
+#define SIOCGIWENCODE	0x8B2B		/* get encoding token & mode */
+/* Power saving stuff (power management, unicast and multicast) */
+#define SIOCSIWPOWER	0x8B2C		/* set Power Management settings */
+#define SIOCGIWPOWER	0x8B2D		/* get Power Management settings */
+
+/* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM).
+ * This ioctl uses struct iw_point and data buffer that includes IE id and len
+ * fields. More than one IE may be included in the request. Setting the generic
+ * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers
+ * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers
+ * are required to report the used IE as a wireless event, e.g., when
+ * associating with an AP. */
+#define SIOCSIWGENIE	0x8B30		/* set generic IE */
+#define SIOCGIWGENIE	0x8B31		/* get generic IE */
+
+/* WPA : IEEE 802.11 MLME requests */
+#define SIOCSIWMLME	0x8B16		/* request MLME operation; uses
+					 * struct iw_mlme */
+/* WPA : Authentication mode parameters */
+#define SIOCSIWAUTH	0x8B32		/* set authentication mode params */
+#define SIOCGIWAUTH	0x8B33		/* get authentication mode params */
+
+/* WPA : Extended version of encoding configuration */
+#define SIOCSIWENCODEEXT 0x8B34		/* set encoding token & mode */
+#define SIOCGIWENCODEEXT 0x8B35		/* get encoding token & mode */
+
+/* WPA2 : PMKSA cache management */
+#define SIOCSIWPMKSA	0x8B36		/* PMKSA cache operation */
+
+/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */
+
+/* These 32 ioctl are wireless device private, for 16 commands.
+ * Each driver is free to use them for whatever purpose it chooses,
+ * however the driver *must* export the description of those ioctls
+ * with SIOCGIWPRIV and *must* use arguments as defined below.
+ * If you don't follow those rules, DaveM is going to hate you (reason :
+ * it make mixed 32/64bit operation impossible).
+ */
+#define SIOCIWFIRSTPRIV	0x8BE0
+#define SIOCIWLASTPRIV	0x8BFF
+/* Previously, we were using SIOCDEVPRIVATE, but we now have our
+ * separate range because of collisions with other tools such as
+ * 'mii-tool'.
+ * We now have 32 commands, so a bit more space ;-).
+ * Also, all 'even' commands are only usable by root and don't return the
+ * content of ifr/iwr to user (but you are not obliged to use the set/get
+ * convention, just use every other two command). More details in iwpriv.c.
+ * And I repeat : you are not forced to use them with iwpriv, but you
+ * must be compliant with it.
+ */
+
+/* ------------------------- IOCTL STUFF ------------------------- */
+
+/* The first and the last (range) */
+#define SIOCIWFIRST	0x8B00
+#define SIOCIWLAST	SIOCIWLASTPRIV		/* 0x8BFF */
+#define IW_IOCTL_IDX(cmd)	((cmd) - SIOCIWFIRST)
+#define IW_HANDLER(id, func)			\
+	[IW_IOCTL_IDX(id)] = func
+
+/* Odd : get (world access), even : set (root access) */
+#define IW_IS_SET(cmd)	(!((cmd) & 0x1))
+#define IW_IS_GET(cmd)	((cmd) & 0x1)
+
+/* ----------------------- WIRELESS EVENTS ----------------------- */
+/* Those are *NOT* ioctls, do not issue request on them !!! */
+/* Most events use the same identifier as ioctl requests */
+
+#define IWEVTXDROP	0x8C00		/* Packet dropped to excessive retry */
+#define IWEVQUAL	0x8C01		/* Quality part of statistics (scan) */
+#define IWEVCUSTOM	0x8C02		/* Driver specific ascii string */
+#define IWEVREGISTERED	0x8C03		/* Discovered a new node (AP mode) */
+#define IWEVEXPIRED	0x8C04		/* Expired a node (AP mode) */
+#define IWEVGENIE	0x8C05		/* Generic IE (WPA, RSN, WMM, ..)
+					 * (scan results); This includes id and
+					 * length fields. One IWEVGENIE may
+					 * contain more than one IE. Scan
+					 * results may contain one or more
+					 * IWEVGENIE events. */
+#define IWEVMICHAELMICFAILURE 0x8C06	/* Michael MIC failure
+					 * (struct iw_michaelmicfailure)
+					 */
+#define IWEVASSOCREQIE	0x8C07		/* IEs used in (Re)Association Request.
+					 * The data includes id and length
+					 * fields and may contain more than one
+					 * IE. This event is required in
+					 * Managed mode if the driver
+					 * generates its own WPA/RSN IE. This
+					 * should be sent just before
+					 * IWEVREGISTERED event for the
+					 * association. */
+#define IWEVASSOCRESPIE	0x8C08		/* IEs used in (Re)Association
+					 * Response. The data includes id and
+					 * length fields and may contain more
+					 * than one IE. This may be sent
+					 * between IWEVASSOCREQIE and
+					 * IWEVREGISTERED events for the
+					 * association. */
+#define IWEVPMKIDCAND	0x8C09		/* PMKID candidate for RSN
+					 * pre-authentication
+					 * (struct iw_pmkid_cand) */
+
+#define IWEVFIRST	0x8C00
+#define IW_EVENT_IDX(cmd)	((cmd) - IWEVFIRST)
+
+/* ------------------------- PRIVATE INFO ------------------------- */
+/*
+ * The following is used with SIOCGIWPRIV. It allow a driver to define
+ * the interface (name, type of data) for its private ioctl.
+ * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV
+ */
+
+#define IW_PRIV_TYPE_MASK	0x7000	/* Type of arguments */
+#define IW_PRIV_TYPE_NONE	0x0000
+#define IW_PRIV_TYPE_BYTE	0x1000	/* Char as number */
+#define IW_PRIV_TYPE_CHAR	0x2000	/* Char as character */
+#define IW_PRIV_TYPE_INT	0x4000	/* 32 bits int */
+#define IW_PRIV_TYPE_FLOAT	0x5000	/* struct iw_freq */
+#define IW_PRIV_TYPE_ADDR	0x6000	/* struct sockaddr */
+
+#define IW_PRIV_SIZE_FIXED	0x0800	/* Variable or fixed number of args */
+
+#define IW_PRIV_SIZE_MASK	0x07FF	/* Max number of those args */
+
+/*
+ * Note : if the number of args is fixed and the size < 16 octets,
+ * instead of passing a pointer we will put args in the iwreq struct...
+ */
+
+/* ----------------------- OTHER CONSTANTS ----------------------- */
+
+/* Maximum frequencies in the range struct */
+#define IW_MAX_FREQUENCIES	32
+/* Note : if you have something like 80 frequencies,
+ * don't increase this constant and don't fill the frequency list.
+ * The user will be able to set by channel anyway... */
+
+/* Maximum bit rates in the range struct */
+#define IW_MAX_BITRATES		32
+
+/* Maximum tx powers in the range struct */
+#define IW_MAX_TXPOWER		8
+/* Note : if you more than 8 TXPowers, just set the max and min or
+ * a few of them in the struct iw_range. */
+
+/* Maximum of address that you may set with SPY */
+#define IW_MAX_SPY		8
+
+/* Maximum of address that you may get in the
+   list of access points in range */
+#define IW_MAX_AP		64
+
+/* Maximum size of the ESSID and NICKN strings */
+#define IW_ESSID_MAX_SIZE	32
+
+/* Modes of operation */
+#define IW_MODE_AUTO	0	/* Let the driver decides */
+#define IW_MODE_ADHOC	1	/* Single cell network */
+#define IW_MODE_INFRA	2	/* Multi cell network, roaming, ... */
+#define IW_MODE_MASTER	3	/* Synchronisation master or Access Point */
+#define IW_MODE_REPEAT	4	/* Wireless Repeater (forwarder) */
+#define IW_MODE_SECOND	5	/* Secondary master/repeater (backup) */
+#define IW_MODE_MONITOR	6	/* Passive monitor (listen only) */
+#define IW_MODE_MESH	7	/* Mesh (IEEE 802.11s) network */
+
+/* Statistics flags (bitmask in updated) */
+#define IW_QUAL_QUAL_UPDATED	0x01	/* Value was updated since last read */
+#define IW_QUAL_LEVEL_UPDATED	0x02
+#define IW_QUAL_NOISE_UPDATED	0x04
+#define IW_QUAL_ALL_UPDATED	0x07
+#define IW_QUAL_DBM		0x08	/* Level + Noise are dBm */
+#define IW_QUAL_QUAL_INVALID	0x10	/* Driver doesn't provide value */
+#define IW_QUAL_LEVEL_INVALID	0x20
+#define IW_QUAL_NOISE_INVALID	0x40
+#define IW_QUAL_RCPI		0x80	/* Level + Noise are 802.11k RCPI */
+#define IW_QUAL_ALL_INVALID	0x70
+
+/* Frequency flags */
+#define IW_FREQ_AUTO		0x00	/* Let the driver decides */
+#define IW_FREQ_FIXED		0x01	/* Force a specific value */
+
+/* Maximum number of size of encoding token available
+ * they are listed in the range structure */
+#define IW_MAX_ENCODING_SIZES	8
+
+/* Maximum size of the encoding token in bytes */
+#define IW_ENCODING_TOKEN_MAX	64	/* 512 bits (for now) */
+
+/* Flags for encoding (along with the token) */
+#define IW_ENCODE_INDEX		0x00FF	/* Token index (if needed) */
+#define IW_ENCODE_FLAGS		0xFF00	/* Flags defined below */
+#define IW_ENCODE_MODE		0xF000	/* Modes defined below */
+#define IW_ENCODE_DISABLED	0x8000	/* Encoding disabled */
+#define IW_ENCODE_ENABLED	0x0000	/* Encoding enabled */
+#define IW_ENCODE_RESTRICTED	0x4000	/* Refuse non-encoded packets */
+#define IW_ENCODE_OPEN		0x2000	/* Accept non-encoded packets */
+#define IW_ENCODE_NOKEY		0x0800  /* Key is write only, so not present */
+#define IW_ENCODE_TEMP		0x0400  /* Temporary key */
+
+/* Power management flags available (along with the value, if any) */
+#define IW_POWER_ON		0x0000	/* No details... */
+#define IW_POWER_TYPE		0xF000	/* Type of parameter */
+#define IW_POWER_PERIOD		0x1000	/* Value is a period/duration of  */
+#define IW_POWER_TIMEOUT	0x2000	/* Value is a timeout (to go asleep) */
+#define IW_POWER_MODE		0x0F00	/* Power Management mode */
+#define IW_POWER_UNICAST_R	0x0100	/* Receive only unicast messages */
+#define IW_POWER_MULTICAST_R	0x0200	/* Receive only multicast messages */
+#define IW_POWER_ALL_R		0x0300	/* Receive all messages though PM */
+#define IW_POWER_FORCE_S	0x0400	/* Force PM procedure for sending unicast */
+#define IW_POWER_REPEATER	0x0800	/* Repeat broadcast messages in PM period */
+#define IW_POWER_MODIFIER	0x000F	/* Modify a parameter */
+#define IW_POWER_MIN		0x0001	/* Value is a minimum  */
+#define IW_POWER_MAX		0x0002	/* Value is a maximum */
+#define IW_POWER_RELATIVE	0x0004	/* Value is not in seconds/ms/us */
+
+/* Transmit Power flags available */
+#define IW_TXPOW_TYPE		0x00FF	/* Type of value */
+#define IW_TXPOW_DBM		0x0000	/* Value is in dBm */
+#define IW_TXPOW_MWATT		0x0001	/* Value is in mW */
+#define IW_TXPOW_RELATIVE	0x0002	/* Value is in arbitrary units */
+#define IW_TXPOW_RANGE		0x1000	/* Range of value between min/max */
+
+/* Retry limits and lifetime flags available */
+#define IW_RETRY_ON		0x0000	/* No details... */
+#define IW_RETRY_TYPE		0xF000	/* Type of parameter */
+#define IW_RETRY_LIMIT		0x1000	/* Maximum number of retries*/
+#define IW_RETRY_LIFETIME	0x2000	/* Maximum duration of retries in us */
+#define IW_RETRY_MODIFIER	0x00FF	/* Modify a parameter */
+#define IW_RETRY_MIN		0x0001	/* Value is a minimum  */
+#define IW_RETRY_MAX		0x0002	/* Value is a maximum */
+#define IW_RETRY_RELATIVE	0x0004	/* Value is not in seconds/ms/us */
+#define IW_RETRY_SHORT		0x0010	/* Value is for short packets  */
+#define IW_RETRY_LONG		0x0020	/* Value is for long packets */
+
+/* Scanning request flags */
+#define IW_SCAN_DEFAULT		0x0000	/* Default scan of the driver */
+#define IW_SCAN_ALL_ESSID	0x0001	/* Scan all ESSIDs */
+#define IW_SCAN_THIS_ESSID	0x0002	/* Scan only this ESSID */
+#define IW_SCAN_ALL_FREQ	0x0004	/* Scan all Frequencies */
+#define IW_SCAN_THIS_FREQ	0x0008	/* Scan only this Frequency */
+#define IW_SCAN_ALL_MODE	0x0010	/* Scan all Modes */
+#define IW_SCAN_THIS_MODE	0x0020	/* Scan only this Mode */
+#define IW_SCAN_ALL_RATE	0x0040	/* Scan all Bit-Rates */
+#define IW_SCAN_THIS_RATE	0x0080	/* Scan only this Bit-Rate */
+/* struct iw_scan_req scan_type */
+#define IW_SCAN_TYPE_ACTIVE 0
+#define IW_SCAN_TYPE_PASSIVE 1
+/* Maximum size of returned data */
+#define IW_SCAN_MAX_DATA	4096	/* In bytes */
+
+/* Scan capability flags - in (struct iw_range *)->scan_capa */
+#define IW_SCAN_CAPA_NONE		0x00
+#define IW_SCAN_CAPA_ESSID		0x01
+#define IW_SCAN_CAPA_BSSID		0x02
+#define IW_SCAN_CAPA_CHANNEL	0x04
+#define IW_SCAN_CAPA_MODE		0x08
+#define IW_SCAN_CAPA_RATE		0x10
+#define IW_SCAN_CAPA_TYPE		0x20
+#define IW_SCAN_CAPA_TIME		0x40
+
+/* Max number of char in custom event - use multiple of them if needed */
+#define IW_CUSTOM_MAX		256	/* In bytes */
+
+/* Generic information element */
+#define IW_GENERIC_IE_MAX	1024
+
+/* MLME requests (SIOCSIWMLME / struct iw_mlme) */
+#define IW_MLME_DEAUTH		0
+#define IW_MLME_DISASSOC	1
+#define IW_MLME_AUTH		2
+#define IW_MLME_ASSOC		3
+
+/* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */
+#define IW_AUTH_INDEX		0x0FFF
+#define IW_AUTH_FLAGS		0xF000
+/* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095)
+ * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the
+ * parameter that is being set/get to; value will be read/written to
+ * struct iw_param value field) */
+#define IW_AUTH_WPA_VERSION		0
+#define IW_AUTH_CIPHER_PAIRWISE		1
+#define IW_AUTH_CIPHER_GROUP		2
+#define IW_AUTH_KEY_MGMT		3
+#define IW_AUTH_TKIP_COUNTERMEASURES	4
+#define IW_AUTH_DROP_UNENCRYPTED	5
+#define IW_AUTH_80211_AUTH_ALG		6
+#define IW_AUTH_WPA_ENABLED		7
+#define IW_AUTH_RX_UNENCRYPTED_EAPOL	8
+#define IW_AUTH_ROAMING_CONTROL		9
+#define IW_AUTH_PRIVACY_INVOKED		10
+#define IW_AUTH_CIPHER_GROUP_MGMT	11
+#define IW_AUTH_MFP			12
+
+/* IW_AUTH_WPA_VERSION values (bit field) */
+#define IW_AUTH_WPA_VERSION_DISABLED	0x00000001
+#define IW_AUTH_WPA_VERSION_WPA		0x00000002
+#define IW_AUTH_WPA_VERSION_WPA2	0x00000004
+
+/* IW_AUTH_PAIRWISE_CIPHER, IW_AUTH_GROUP_CIPHER, and IW_AUTH_CIPHER_GROUP_MGMT
+ * values (bit field) */
+#define IW_AUTH_CIPHER_NONE	0x00000001
+#define IW_AUTH_CIPHER_WEP40	0x00000002
+#define IW_AUTH_CIPHER_TKIP	0x00000004
+#define IW_AUTH_CIPHER_CCMP	0x00000008
+#define IW_AUTH_CIPHER_WEP104	0x00000010
+#define IW_AUTH_CIPHER_AES_CMAC	0x00000020
+
+/* IW_AUTH_KEY_MGMT values (bit field) */
+#define IW_AUTH_KEY_MGMT_802_1X	1
+#define IW_AUTH_KEY_MGMT_PSK	2
+
+/* IW_AUTH_80211_AUTH_ALG values (bit field) */
+#define IW_AUTH_ALG_OPEN_SYSTEM	0x00000001
+#define IW_AUTH_ALG_SHARED_KEY	0x00000002
+#define IW_AUTH_ALG_LEAP	0x00000004
+
+/* IW_AUTH_ROAMING_CONTROL values */
+#define IW_AUTH_ROAMING_ENABLE	0	/* driver/firmware based roaming */
+#define IW_AUTH_ROAMING_DISABLE	1	/* user space program used for roaming
+					 * control */
+
+/* IW_AUTH_MFP (management frame protection) values */
+#define IW_AUTH_MFP_DISABLED	0	/* MFP disabled */
+#define IW_AUTH_MFP_OPTIONAL	1	/* MFP optional */
+#define IW_AUTH_MFP_REQUIRED	2	/* MFP required */
+
+/* SIOCSIWENCODEEXT definitions */
+#define IW_ENCODE_SEQ_MAX_SIZE	8
+/* struct iw_encode_ext ->alg */
+#define IW_ENCODE_ALG_NONE	0
+#define IW_ENCODE_ALG_WEP	1
+#define IW_ENCODE_ALG_TKIP	2
+#define IW_ENCODE_ALG_CCMP	3
+#define IW_ENCODE_ALG_PMK	4
+#define IW_ENCODE_ALG_AES_CMAC	5
+/* struct iw_encode_ext ->ext_flags */
+#define IW_ENCODE_EXT_TX_SEQ_VALID	0x00000001
+#define IW_ENCODE_EXT_RX_SEQ_VALID	0x00000002
+#define IW_ENCODE_EXT_GROUP_KEY		0x00000004
+#define IW_ENCODE_EXT_SET_TX_KEY	0x00000008
+
+/* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */
+#define IW_MICFAILURE_KEY_ID	0x00000003 /* Key ID 0..3 */
+#define IW_MICFAILURE_GROUP	0x00000004
+#define IW_MICFAILURE_PAIRWISE	0x00000008
+#define IW_MICFAILURE_STAKEY	0x00000010
+#define IW_MICFAILURE_COUNT	0x00000060 /* 1 or 2 (0 = count not supported)
+					    */
+
+/* Bit field values for enc_capa in struct iw_range */
+#define IW_ENC_CAPA_WPA		0x00000001
+#define IW_ENC_CAPA_WPA2	0x00000002
+#define IW_ENC_CAPA_CIPHER_TKIP	0x00000004
+#define IW_ENC_CAPA_CIPHER_CCMP	0x00000008
+#define IW_ENC_CAPA_4WAY_HANDSHAKE	0x00000010
+
+/* Event capability macros - in (struct iw_range *)->event_capa
+ * Because we have more than 32 possible events, we use an array of
+ * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */
+#define IW_EVENT_CAPA_BASE(cmd)		((cmd >= SIOCIWFIRSTPRIV) ? \
+					 (cmd - SIOCIWFIRSTPRIV + 0x60) : \
+					 (cmd - SIOCIWFIRST))
+#define IW_EVENT_CAPA_INDEX(cmd)	(IW_EVENT_CAPA_BASE(cmd) >> 5)
+#define IW_EVENT_CAPA_MASK(cmd)		(1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F))
+/* Event capability constants - event autogenerated by the kernel
+ * This list is valid for most 802.11 devices, customise as needed... */
+#define IW_EVENT_CAPA_K_0	(IW_EVENT_CAPA_MASK(0x8B04) | \
+				 IW_EVENT_CAPA_MASK(0x8B06) | \
+				 IW_EVENT_CAPA_MASK(0x8B1A))
+#define IW_EVENT_CAPA_K_1	(IW_EVENT_CAPA_MASK(0x8B2A))
+/* "Easy" macro to set events in iw_range (less efficient) */
+#define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd))
+#define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; }
+
+
+/****************************** TYPES ******************************/
+
+/* --------------------------- SUBTYPES --------------------------- */
+/*
+ *	Generic format for most parameters that fit in an int
+ */
+struct	iw_param
+{
+  __s32		value;		/* The value of the parameter itself */
+  __u8		fixed;		/* Hardware should not use auto select */
+  __u8		disabled;	/* Disable the feature */
+  __u16		flags;		/* Various specifc flags (if any) */
+};
+
+/*
+ *	For all data larger than 16 octets, we need to use a
+ *	pointer to memory allocated in user space.
+ */
+struct	iw_point
+{
+  void __user	*pointer;	/* Pointer to the data  (in user space) */
+  __u16		length;		/* number of fields or size in bytes */
+  __u16		flags;		/* Optional params */
+};
+
+#ifdef __KERNEL__
+#ifdef CONFIG_COMPAT
+
+#include <linux/compat.h>
+
+struct compat_iw_point {
+	compat_caddr_t pointer;
+	__u16 length;
+	__u16 flags;
+};
+#endif
+#endif
+
+/*
+ *	A frequency
+ *	For numbers lower than 10^9, we encode the number in 'm' and
+ *	set 'e' to 0
+ *	For number greater than 10^9, we divide it by the lowest power
+ *	of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')...
+ *	The power of 10 is in 'e', the result of the division is in 'm'.
+ */
+struct	iw_freq
+{
+	__s32		m;		/* Mantissa */
+	__s16		e;		/* Exponent */
+	__u8		i;		/* List index (when in range struct) */
+	__u8		flags;		/* Flags (fixed/auto) */
+};
+
+/*
+ *	Quality of the link
+ */
+struct	iw_quality
+{
+	__u8		qual;		/* link quality (%retries, SNR,
+					   %missed beacons or better...) */
+	__u8		level;		/* signal level (dBm) */
+	__u8		noise;		/* noise level (dBm) */
+	__u8		updated;	/* Flags to know if updated */
+};
+
+/*
+ *	Packet discarded in the wireless adapter due to
+ *	"wireless" specific problems...
+ *	Note : the list of counter and statistics in net_device_stats
+ *	is already pretty exhaustive, and you should use that first.
+ *	This is only additional stats...
+ */
+struct	iw_discarded
+{
+	__u32		nwid;		/* Rx : Wrong nwid/essid */
+	__u32		code;		/* Rx : Unable to code/decode (WEP) */
+	__u32		fragment;	/* Rx : Can't perform MAC reassembly */
+	__u32		retries;	/* Tx : Max MAC retries num reached */
+	__u32		misc;		/* Others cases */
+};
+
+/*
+ *	Packet/Time period missed in the wireless adapter due to
+ *	"wireless" specific problems...
+ */
+struct	iw_missed
+{
+	__u32		beacon;		/* Missed beacons/superframe */
+};
+
+/*
+ *	Quality range (for spy threshold)
+ */
+struct	iw_thrspy
+{
+	struct sockaddr		addr;		/* Source address (hw/mac) */
+	struct iw_quality	qual;		/* Quality of the link */
+	struct iw_quality	low;		/* Low threshold */
+	struct iw_quality	high;		/* High threshold */
+};
+
+/*
+ *	Optional data for scan request
+ *
+ *	Note: these optional parameters are controlling parameters for the
+ *	scanning behavior, these do not apply to getting scan results
+ *	(SIOCGIWSCAN). Drivers are expected to keep a local BSS table and
+ *	provide a merged results with all BSSes even if the previous scan
+ *	request limited scanning to a subset, e.g., by specifying an SSID.
+ *	Especially, scan results are required to include an entry for the
+ *	current BSS if the driver is in Managed mode and associated with an AP.
+ */
+struct	iw_scan_req
+{
+	__u8		scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */
+	__u8		essid_len;
+	__u8		num_channels; /* num entries in channel_list;
+				       * 0 = scan all allowed channels */
+	__u8		flags; /* reserved as padding; use zero, this may
+				* be used in the future for adding flags
+				* to request different scan behavior */
+	struct sockaddr	bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or
+				* individual address of a specific BSS */
+
+	/*
+	 * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using
+	 * the current ESSID. This allows scan requests for specific ESSID
+	 * without having to change the current ESSID and potentially breaking
+	 * the current association.
+	 */
+	__u8		essid[IW_ESSID_MAX_SIZE];
+
+	/*
+	 * Optional parameters for changing the default scanning behavior.
+	 * These are based on the MLME-SCAN.request from IEEE Std 802.11.
+	 * TU is 1.024 ms. If these are set to 0, driver is expected to use
+	 * reasonable default values. min_channel_time defines the time that
+	 * will be used to wait for the first reply on each channel. If no
+	 * replies are received, next channel will be scanned after this. If
+	 * replies are received, total time waited on the channel is defined by
+	 * max_channel_time.
+	 */
+	__u32		min_channel_time; /* in TU */
+	__u32		max_channel_time; /* in TU */
+
+	struct iw_freq	channel_list[IW_MAX_FREQUENCIES];
+};
+
+/* ------------------------- WPA SUPPORT ------------------------- */
+
+/*
+ *	Extended data structure for get/set encoding (this is used with
+ *	SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_*
+ *	flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and
+ *	only the data contents changes (key data -> this structure, including
+ *	key data).
+ *
+ *	If the new key is the first group key, it will be set as the default
+ *	TX key. Otherwise, default TX key index is only changed if
+ *	IW_ENCODE_EXT_SET_TX_KEY flag is set.
+ *
+ *	Key will be changed with SIOCSIWENCODEEXT in all cases except for
+ *	special "change TX key index" operation which is indicated by setting
+ *	key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY.
+ *
+ *	tx_seq/rx_seq are only used when respective
+ *	IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal
+ *	TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start
+ *	TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally
+ *	used only by an Authenticator (AP or an IBSS station) to get the
+ *	current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and
+ *	RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for
+ *	debugging/testing.
+ */
+struct	iw_encode_ext
+{
+	__u32		ext_flags; /* IW_ENCODE_EXT_* */
+	__u8		tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+	__u8		rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+	struct sockaddr	addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast
+			       * (group) keys or unicast address for
+			       * individual keys */
+	__u16		alg; /* IW_ENCODE_ALG_* */
+	__u16		key_len;
+	__u8		key[0];
+};
+
+/* SIOCSIWMLME data */
+struct	iw_mlme
+{
+	__u16		cmd; /* IW_MLME_* */
+	__u16		reason_code;
+	struct sockaddr	addr;
+};
+
+/* SIOCSIWPMKSA data */
+#define IW_PMKSA_ADD		1
+#define IW_PMKSA_REMOVE		2
+#define IW_PMKSA_FLUSH		3
+
+#define IW_PMKID_LEN	16
+
+struct	iw_pmksa
+{
+	__u32		cmd; /* IW_PMKSA_* */
+	struct sockaddr	bssid;
+	__u8		pmkid[IW_PMKID_LEN];
+};
+
+/* IWEVMICHAELMICFAILURE data */
+struct	iw_michaelmicfailure
+{
+	__u32		flags;
+	struct sockaddr	src_addr;
+	__u8		tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+};
+
+/* IWEVPMKIDCAND data */
+#define IW_PMKID_CAND_PREAUTH	0x00000001 /* RNS pre-authentication enabled */
+struct	iw_pmkid_cand
+{
+	__u32		flags; /* IW_PMKID_CAND_* */
+	__u32		index; /* the smaller the index, the higher the
+				* priority */
+	struct sockaddr	bssid;
+};
+
+/* ------------------------ WIRELESS STATS ------------------------ */
+/*
+ * Wireless statistics (used for /proc/net/wireless)
+ */
+struct	iw_statistics
+{
+	__u16		status;		/* Status
+					 * - device dependent for now */
+
+	struct iw_quality	qual;		/* Quality of the link
+						 * (instant/mean/max) */
+	struct iw_discarded	discard;	/* Packet discarded counts */
+	struct iw_missed	miss;		/* Packet missed counts */
+};
+
+/* ------------------------ IOCTL REQUEST ------------------------ */
+/*
+ * This structure defines the payload of an ioctl, and is used 
+ * below.
+ *
+ * Note that this structure should fit on the memory footprint
+ * of iwreq (which is the same as ifreq), which mean a max size of
+ * 16 octets = 128 bits. Warning, pointers might be 64 bits wide...
+ * You should check this when increasing the structures defined
+ * above in this file...
+ */
+union	iwreq_data
+{
+	/* Config - generic */
+	char		name[IFNAMSIZ];
+	/* Name : used to verify the presence of  wireless extensions.
+	 * Name of the protocol/provider... */
+
+	struct iw_point	essid;		/* Extended network name */
+	struct iw_param	nwid;		/* network id (or domain - the cell) */
+	struct iw_freq	freq;		/* frequency or channel :
+					 * 0-1000 = channel
+					 * > 1000 = frequency in Hz */
+
+	struct iw_param	sens;		/* signal level threshold */
+	struct iw_param	bitrate;	/* default bit rate */
+	struct iw_param	txpower;	/* default transmit power */
+	struct iw_param	rts;		/* RTS threshold threshold */
+	struct iw_param	frag;		/* Fragmentation threshold */
+	__u32		mode;		/* Operation mode */
+	struct iw_param	retry;		/* Retry limits & lifetime */
+
+	struct iw_point	encoding;	/* Encoding stuff : tokens */
+	struct iw_param	power;		/* PM duration/timeout */
+	struct iw_quality qual;		/* Quality part of statistics */
+
+	struct sockaddr	ap_addr;	/* Access point address */
+	struct sockaddr	addr;		/* Destination address (hw/mac) */
+
+	struct iw_param	param;		/* Other small parameters */
+	struct iw_point	data;		/* Other large parameters */
+};
+
+/*
+ * The structure to exchange data for ioctl.
+ * This structure is the same as 'struct ifreq', but (re)defined for
+ * convenience...
+ * Do I need to remind you about structure size (32 octets) ?
+ */
+struct	iwreq 
+{
+	union
+	{
+		char	ifrn_name[IFNAMSIZ];	/* if name, e.g. "eth0" */
+	} ifr_ifrn;
+
+	/* Data part (defined just above) */
+	union	iwreq_data	u;
+};
+
+/* -------------------------- IOCTL DATA -------------------------- */
+/*
+ *	For those ioctl which want to exchange mode data that what could
+ *	fit in the above structure...
+ */
+
+/*
+ *	Range of parameters
+ */
+
+struct	iw_range
+{
+	/* Informative stuff (to choose between different interface) */
+	__u32		throughput;	/* To give an idea... */
+	/* In theory this value should be the maximum benchmarked
+	 * TCP/IP throughput, because with most of these devices the
+	 * bit rate is meaningless (overhead an co) to estimate how
+	 * fast the connection will go and pick the fastest one.
+	 * I suggest people to play with Netperf or any benchmark...
+	 */
+
+	/* NWID (or domain id) */
+	__u32		min_nwid;	/* Minimal NWID we are able to set */
+	__u32		max_nwid;	/* Maximal NWID we are able to set */
+
+	/* Old Frequency (backward compat - moved lower ) */
+	__u16		old_num_channels;
+	__u8		old_num_frequency;
+
+	/* Scan capabilities */
+	__u8		scan_capa; 	/* IW_SCAN_CAPA_* bit field */
+
+	/* Wireless event capability bitmasks */
+	__u32		event_capa[6];
+
+	/* signal level threshold range */
+	__s32		sensitivity;
+
+	/* Quality of link & SNR stuff */
+	/* Quality range (link, level, noise)
+	 * If the quality is absolute, it will be in the range [0 ; max_qual],
+	 * if the quality is dBm, it will be in the range [max_qual ; 0].
+	 * Don't forget that we use 8 bit arithmetics... */
+	struct iw_quality	max_qual;	/* Quality of the link */
+	/* This should contain the average/typical values of the quality
+	 * indicator. This should be the threshold between a "good" and
+	 * a "bad" link (example : monitor going from green to orange).
+	 * Currently, user space apps like quality monitors don't have any
+	 * way to calibrate the measurement. With this, they can split
+	 * the range between 0 and max_qual in different quality level
+	 * (using a geometric subdivision centered on the average).
+	 * I expect that people doing the user space apps will feedback
+	 * us on which value we need to put in each driver... */
+	struct iw_quality	avg_qual;	/* Quality of the link */
+
+	/* Rates */
+	__u8		num_bitrates;	/* Number of entries in the list */
+	__s32		bitrate[IW_MAX_BITRATES];	/* list, in bps */
+
+	/* RTS threshold */
+	__s32		min_rts;	/* Minimal RTS threshold */
+	__s32		max_rts;	/* Maximal RTS threshold */
+
+	/* Frag threshold */
+	__s32		min_frag;	/* Minimal frag threshold */
+	__s32		max_frag;	/* Maximal frag threshold */
+
+	/* Power Management duration & timeout */
+	__s32		min_pmp;	/* Minimal PM period */
+	__s32		max_pmp;	/* Maximal PM period */
+	__s32		min_pmt;	/* Minimal PM timeout */
+	__s32		max_pmt;	/* Maximal PM timeout */
+	__u16		pmp_flags;	/* How to decode max/min PM period */
+	__u16		pmt_flags;	/* How to decode max/min PM timeout */
+	__u16		pm_capa;	/* What PM options are supported */
+
+	/* Encoder stuff */
+	__u16	encoding_size[IW_MAX_ENCODING_SIZES];	/* Different token sizes */
+	__u8	num_encoding_sizes;	/* Number of entry in the list */
+	__u8	max_encoding_tokens;	/* Max number of tokens */
+	/* For drivers that need a "login/passwd" form */
+	__u8	encoding_login_index;	/* token index for login token */
+
+	/* Transmit power */
+	__u16		txpower_capa;	/* What options are supported */
+	__u8		num_txpower;	/* Number of entries in the list */
+	__s32		txpower[IW_MAX_TXPOWER];	/* list, in bps */
+
+	/* Wireless Extension version info */
+	__u8		we_version_compiled;	/* Must be WIRELESS_EXT */
+	__u8		we_version_source;	/* Last update of source */
+
+	/* Retry limits and lifetime */
+	__u16		retry_capa;	/* What retry options are supported */
+	__u16		retry_flags;	/* How to decode max/min retry limit */
+	__u16		r_time_flags;	/* How to decode max/min retry life */
+	__s32		min_retry;	/* Minimal number of retries */
+	__s32		max_retry;	/* Maximal number of retries */
+	__s32		min_r_time;	/* Minimal retry lifetime */
+	__s32		max_r_time;	/* Maximal retry lifetime */
+
+	/* Frequency */
+	__u16		num_channels;	/* Number of channels [0; num - 1] */
+	__u8		num_frequency;	/* Number of entry in the list */
+	struct iw_freq	freq[IW_MAX_FREQUENCIES];	/* list */
+	/* Note : this frequency list doesn't need to fit channel numbers,
+	 * because each entry contain its channel index */
+
+	__u32		enc_capa;	/* IW_ENC_CAPA_* bit field */
+};
+
+/*
+ * Private ioctl interface information
+ */
+ 
+struct	iw_priv_args
+{
+	__u32		cmd;		/* Number of the ioctl to issue */
+	__u16		set_args;	/* Type and number of args */
+	__u16		get_args;	/* Type and number of args */
+	char		name[IFNAMSIZ];	/* Name of the extension */
+};
+
+/* ----------------------- WIRELESS EVENTS ----------------------- */
+/*
+ * Wireless events are carried through the rtnetlink socket to user
+ * space. They are encapsulated in the IFLA_WIRELESS field of
+ * a RTM_NEWLINK message.
+ */
+
+/*
+ * A Wireless Event. Contains basically the same data as the ioctl...
+ */
+struct iw_event
+{
+	__u16		len;			/* Real length of this stuff */
+	__u16		cmd;			/* Wireless IOCTL */
+	union iwreq_data	u;		/* IOCTL fixed payload */
+};
+
+/* Size of the Event prefix (including padding and alignement junk) */
+#define IW_EV_LCP_LEN	(sizeof(struct iw_event) - sizeof(union iwreq_data))
+/* Size of the various events */
+#define IW_EV_CHAR_LEN	(IW_EV_LCP_LEN + IFNAMSIZ)
+#define IW_EV_UINT_LEN	(IW_EV_LCP_LEN + sizeof(__u32))
+#define IW_EV_FREQ_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_freq))
+#define IW_EV_PARAM_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_param))
+#define IW_EV_ADDR_LEN	(IW_EV_LCP_LEN + sizeof(struct sockaddr))
+#define IW_EV_QUAL_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_quality))
+
+/* iw_point events are special. First, the payload (extra data) come at
+ * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second,
+ * we omit the pointer, so start at an offset. */
+#define IW_EV_POINT_OFF (((char *) &(((struct iw_point *) NULL)->length)) - \
+			  (char *) NULL)
+#define IW_EV_POINT_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_point) - \
+			 IW_EV_POINT_OFF)
+
+#ifdef __KERNEL__
+#ifdef CONFIG_COMPAT
+struct __compat_iw_event {
+	__u16		len;			/* Real length of this stuff */
+	__u16		cmd;			/* Wireless IOCTL */
+	compat_caddr_t	pointer;
+};
+#define IW_EV_COMPAT_LCP_LEN offsetof(struct __compat_iw_event, pointer)
+#define IW_EV_COMPAT_POINT_OFF offsetof(struct compat_iw_point, length)
+
+/* Size of the various events for compat */
+#define IW_EV_COMPAT_CHAR_LEN	(IW_EV_COMPAT_LCP_LEN + IFNAMSIZ)
+#define IW_EV_COMPAT_UINT_LEN	(IW_EV_COMPAT_LCP_LEN + sizeof(__u32))
+#define IW_EV_COMPAT_FREQ_LEN	(IW_EV_COMPAT_LCP_LEN + sizeof(struct iw_freq))
+#define IW_EV_COMPAT_PARAM_LEN	(IW_EV_COMPAT_LCP_LEN + sizeof(struct iw_param))
+#define IW_EV_COMPAT_ADDR_LEN	(IW_EV_COMPAT_LCP_LEN + sizeof(struct sockaddr))
+#define IW_EV_COMPAT_QUAL_LEN	(IW_EV_COMPAT_LCP_LEN + sizeof(struct iw_quality))
+#define IW_EV_COMPAT_POINT_LEN	\
+	(IW_EV_COMPAT_LCP_LEN + sizeof(struct compat_iw_point) - \
+	 IW_EV_COMPAT_POINT_OFF)
+#endif
+#endif
+
+/* Size of the Event prefix when packed in stream */
+#define IW_EV_LCP_PK_LEN	(4)
+/* Size of the various events when packed in stream */
+#define IW_EV_CHAR_PK_LEN	(IW_EV_LCP_PK_LEN + IFNAMSIZ)
+#define IW_EV_UINT_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(__u32))
+#define IW_EV_FREQ_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_freq))
+#define IW_EV_PARAM_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_param))
+#define IW_EV_ADDR_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct sockaddr))
+#define IW_EV_QUAL_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_quality))
+#define IW_EV_POINT_PK_LEN	(IW_EV_LCP_PK_LEN + 4)
+
+#endif	/* _LINUX_WIRELESS_H */
diff --git a/include/linux/wl127x-rfkill.h b/include/linux/wl127x-rfkill.h
new file mode 100644
index 00000000..9057ec63
--- /dev/null
+++ b/include/linux/wl127x-rfkill.h
@@ -0,0 +1,35 @@
+/*
+ * Bluetooth TI wl127x rfkill power control via GPIO
+ *
+ * Copyright (C) 2009 Motorola, Inc.
+ * Copyright (C) 2008 Texas Instruments
+ * Initial code: Pavan Savoy <pavan.savoy@gmail.com> (wl127x_power.c)
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef _LINUX_WL127X_RFKILL_H
+#define _LINUX_WL127X_RFKILL_H
+
+#include <linux/rfkill.h>
+
+struct wl127x_rfkill_platform_data {
+	int nshutdown_gpio;
+
+	struct rfkill *rfkill;  /* for driver only */
+};
+
+#endif
diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h
new file mode 100644
index 00000000..0d637319
--- /dev/null
+++ b/include/linux/wl12xx.h
@@ -0,0 +1,81 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef _LINUX_WL12XX_H
+#define _LINUX_WL12XX_H
+
+/* Reference clock values */
+enum {
+	WL12XX_REFCLOCK_19	= 0, /* 19.2 MHz */
+	WL12XX_REFCLOCK_26	= 1, /* 26 MHz */
+	WL12XX_REFCLOCK_38	= 2, /* 38.4 MHz */
+	WL12XX_REFCLOCK_52	= 3, /* 52 MHz */
+	WL12XX_REFCLOCK_38_XTAL = 4, /* 38.4 MHz, XTAL */
+	WL12XX_REFCLOCK_26_XTAL = 5, /* 26 MHz, XTAL */
+};
+
+/* TCXO clock values */
+enum {
+	WL12XX_TCXOCLOCK_19_2	= 0, /* 19.2MHz */
+	WL12XX_TCXOCLOCK_26	= 1, /* 26 MHz */
+	WL12XX_TCXOCLOCK_38_4	= 2, /* 38.4MHz */
+	WL12XX_TCXOCLOCK_52	= 3, /* 52 MHz */
+	WL12XX_TCXOCLOCK_16_368	= 4, /* 16.368 MHz */
+	WL12XX_TCXOCLOCK_32_736	= 5, /* 32.736 MHz */
+	WL12XX_TCXOCLOCK_16_8	= 6, /* 16.8 MHz */
+	WL12XX_TCXOCLOCK_33_6	= 7, /* 33.6 MHz */
+};
+
+struct wl12xx_platform_data {
+	void (*set_power)(bool enable);
+	/* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */
+	int irq;
+	bool use_eeprom;
+	int board_ref_clock;
+	int board_tcxo_clock;
+	unsigned long platform_quirks;
+	bool pwr_in_suspend;
+
+	struct wl1271_if_operations *ops;
+};
+
+/* Platform does not support level trigger interrupts */
+#define WL12XX_PLATFORM_QUIRK_EDGE_IRQ	BIT(0)
+
+#ifdef CONFIG_WL12XX_PLATFORM_DATA
+
+int wl12xx_set_platform_data(const struct wl12xx_platform_data *data);
+
+#else
+
+static inline
+int wl12xx_set_platform_data(const struct wl12xx_platform_data *data)
+{
+	return -ENOSYS;
+}
+
+#endif
+
+struct wl12xx_platform_data *wl12xx_get_platform_data(void);
+
+#endif
diff --git a/include/linux/wlan_plat.h b/include/linux/wlan_plat.h
new file mode 100644
index 00000000..40ec3482
--- /dev/null
+++ b/include/linux/wlan_plat.h
@@ -0,0 +1,27 @@
+/* include/linux/wlan_plat.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef _LINUX_WLAN_PLAT_H_
+#define _LINUX_WLAN_PLAT_H_
+
+struct wifi_platform_data {
+	int (*set_power)(int val);
+	int (*set_reset)(int val);
+	int (*set_carddetect)(int val);
+	void *(*mem_prealloc)(int section, unsigned long size);
+	int (*get_mac_addr)(unsigned char *buf);
+	void *(*get_country_code)(char *ccode);
+};
+
+#endif
diff --git a/include/linux/wm97xx.h b/include/linux/wm97xx.h
new file mode 100644
index 00000000..fd98bb96
--- /dev/null
+++ b/include/linux/wm97xx.h
@@ -0,0 +1,337 @@
+
+/*
+ * Register bits and API for Wolfson WM97xx series of codecs
+ */
+
+#ifndef _LINUX_WM97XX_H
+#define _LINUX_WM97XX_H
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/ac97_codec.h>
+#include <sound/initval.h>
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/input.h>	/* Input device layer */
+#include <linux/platform_device.h>
+
+/*
+ * WM97xx variants
+ */
+#define	WM97xx_GENERIC			0x0000
+#define	WM97xx_WM1613			0x1613
+
+/*
+ * WM97xx AC97 Touchscreen registers
+ */
+#define AC97_WM97XX_DIGITISER1		0x76
+#define AC97_WM97XX_DIGITISER2		0x78
+#define AC97_WM97XX_DIGITISER_RD 	0x7a
+#define AC97_WM9713_DIG1		0x74
+#define AC97_WM9713_DIG2		AC97_WM97XX_DIGITISER1
+#define AC97_WM9713_DIG3		AC97_WM97XX_DIGITISER2
+
+/*
+ * WM97xx register bits
+ */
+#define WM97XX_POLL		0x8000	/* initiate a polling measurement */
+#define WM97XX_ADCSEL_X		0x1000	/* x coord measurement */
+#define WM97XX_ADCSEL_Y		0x2000	/* y coord measurement */
+#define WM97XX_ADCSEL_PRES	0x3000	/* pressure measurement */
+#define WM97XX_AUX_ID1		0x4000
+#define WM97XX_AUX_ID2		0x5000
+#define WM97XX_AUX_ID3		0x6000
+#define WM97XX_AUX_ID4		0x7000
+#define WM97XX_ADCSEL_MASK	0x7000	/* ADC selection mask */
+#define WM97XX_COO		0x0800	/* enable coordinate mode */
+#define WM97XX_CTC		0x0400	/* enable continuous mode */
+#define WM97XX_CM_RATE_93	0x0000	/* 93.75Hz continuous rate */
+#define WM97XX_CM_RATE_187	0x0100	/* 187.5Hz continuous rate */
+#define WM97XX_CM_RATE_375	0x0200	/* 375Hz continuous rate */
+#define WM97XX_CM_RATE_750	0x0300	/* 750Hz continuous rate */
+#define WM97XX_CM_RATE_8K	0x00f0	/* 8kHz continuous rate */
+#define WM97XX_CM_RATE_12K	0x01f0	/* 12kHz continuous rate */
+#define WM97XX_CM_RATE_24K	0x02f0	/* 24kHz continuous rate */
+#define WM97XX_CM_RATE_48K	0x03f0	/* 48kHz continuous rate */
+#define WM97XX_CM_RATE_MASK	0x03f0
+#define WM97XX_RATE(i)		(((i & 3) << 8) | ((i & 4) ? 0xf0 : 0))
+#define WM97XX_DELAY(i)		((i << 4) & 0x00f0)	/* sample delay times */
+#define WM97XX_DELAY_MASK	0x00f0
+#define WM97XX_SLEN		0x0008	/* slot read back enable */
+#define WM97XX_SLT(i)		((i - 5) & 0x7)	/* panel slot (5-11) */
+#define WM97XX_SLT_MASK		0x0007
+#define WM97XX_PRP_DETW		0x4000	/* detect on, digitise off, wake */
+#define WM97XX_PRP_DET		0x8000	/* detect on, digitise off, no wake */
+#define WM97XX_PRP_DET_DIG	0xc000	/* setect on, digitise on */
+#define WM97XX_RPR		0x2000	/* wake up on pen down */
+#define WM97XX_PEN_DOWN		0x8000	/* pen is down */
+
+/* WM9712 Bits */
+#define WM9712_45W		0x1000	/* set for 5-wire touchscreen */
+#define WM9712_PDEN		0x0800	/* measure only when pen down */
+#define WM9712_WAIT		0x0200	/* wait until adc is read before next sample */
+#define WM9712_PIL		0x0100	/* current used for pressure measurement. set 400uA else 200uA */
+#define WM9712_MASK_HI		0x0040	/* hi on mask pin (47) stops conversions */
+#define WM9712_MASK_EDGE	0x0080	/* rising/falling edge on pin delays sample */
+#define	WM9712_MASK_SYNC	0x00c0	/* rising/falling edge on mask initiates sample */
+#define WM9712_RPU(i)		(i&0x3f)	/* internal pull up on pen detect (64k / rpu) */
+#define WM9712_PD(i)		(0x1 << i)	/* power management */
+
+/* WM9712 Registers */
+#define AC97_WM9712_POWER	0x24
+#define AC97_WM9712_REV		0x58
+
+/* WM9705 Bits */
+#define WM9705_PDEN		0x1000	/* measure only when pen is down */
+#define WM9705_PINV		0x0800	/* inverts sense of pen down output */
+#define WM9705_BSEN		0x0400	/* BUSY flag enable, pin47 is 1 when busy */
+#define WM9705_BINV		0x0200	/* invert BUSY (pin47) output */
+#define WM9705_WAIT		0x0100	/* wait until adc is read before next sample */
+#define WM9705_PIL		0x0080	/* current used for pressure measurement. set 400uA else 200uA */
+#define WM9705_PHIZ		0x0040	/* set PHONE and PCBEEP inputs to high impedance */
+#define WM9705_MASK_HI		0x0010	/* hi on mask stops conversions */
+#define WM9705_MASK_EDGE	0x0020	/* rising/falling edge on pin delays sample */
+#define	WM9705_MASK_SYNC	0x0030	/* rising/falling edge on mask initiates sample */
+#define WM9705_PDD(i)		(i & 0x000f)	/* pen detect comparator threshold */
+
+
+/* WM9713 Bits */
+#define WM9713_PDPOL		0x0400	/* Pen down polarity */
+#define WM9713_POLL		0x0200	/* initiate a polling measurement */
+#define WM9713_CTC		0x0100	/* enable continuous mode */
+#define WM9713_ADCSEL_X		0x0002	/* X measurement */
+#define WM9713_ADCSEL_Y		0x0004	/* Y measurement */
+#define WM9713_ADCSEL_PRES	0x0008	/* Pressure measurement */
+#define WM9713_COO		0x0001	/* enable coordinate mode */
+#define WM9713_45W		0x1000  /* set for 5 wire panel */
+#define WM9713_PDEN		0x0800	/* measure only when pen down */
+#define WM9713_ADCSEL_MASK	0x00fe	/* ADC selection mask */
+#define WM9713_WAIT		0x0200	/* coordinate wait */
+
+/* AUX ADC ID's */
+#define TS_COMP1		0x0
+#define TS_COMP2		0x1
+#define TS_BMON			0x2
+#define TS_WIPER		0x3
+
+/* ID numbers */
+#define WM97XX_ID1		0x574d
+#define WM9712_ID2		0x4c12
+#define WM9705_ID2		0x4c05
+#define WM9713_ID2		0x4c13
+
+/* Codec GPIO's */
+#define WM97XX_MAX_GPIO		16
+#define WM97XX_GPIO_1		(1 << 1)
+#define WM97XX_GPIO_2		(1 << 2)
+#define WM97XX_GPIO_3		(1 << 3)
+#define WM97XX_GPIO_4		(1 << 4)
+#define WM97XX_GPIO_5		(1 << 5)
+#define WM97XX_GPIO_6		(1 << 6)
+#define WM97XX_GPIO_7		(1 << 7)
+#define WM97XX_GPIO_8		(1 << 8)
+#define WM97XX_GPIO_9		(1 << 9)
+#define WM97XX_GPIO_10		(1 << 10)
+#define WM97XX_GPIO_11		(1 << 11)
+#define WM97XX_GPIO_12		(1 << 12)
+#define WM97XX_GPIO_13		(1 << 13)
+#define WM97XX_GPIO_14		(1 << 14)
+#define WM97XX_GPIO_15		(1 << 15)
+
+
+#define AC97_LINK_FRAME		21	/* time in uS for AC97 link frame */
+
+
+/*---------------- Return codes from sample reading functions ---------------*/
+
+/* More data is available; call the sample gathering function again */
+#define RC_AGAIN			0x00000001
+/* The returned sample is valid */
+#define RC_VALID			0x00000002
+/* The pen is up (the first RC_VALID without RC_PENUP means pen is down) */
+#define RC_PENUP			0x00000004
+/* The pen is down (RC_VALID implies RC_PENDOWN, but sometimes it is helpful
+   to tell the handler that the pen is down but we don't know yet his coords,
+   so the handler should not sleep or wait for pendown irq) */
+#define RC_PENDOWN			0x00000008
+
+/*
+ * The wm97xx driver provides a private API for writing platform-specific
+ * drivers.
+ */
+
+/* The structure used to return arch specific sampled data into */
+struct wm97xx_data {
+    int x;
+    int y;
+    int p;
+};
+
+/*
+ * Codec GPIO status
+ */
+enum wm97xx_gpio_status {
+    WM97XX_GPIO_HIGH,
+    WM97XX_GPIO_LOW
+};
+
+/*
+ * Codec GPIO direction
+ */
+enum wm97xx_gpio_dir {
+    WM97XX_GPIO_IN,
+    WM97XX_GPIO_OUT
+};
+
+/*
+ * Codec GPIO polarity
+ */
+enum wm97xx_gpio_pol {
+    WM97XX_GPIO_POL_HIGH,
+    WM97XX_GPIO_POL_LOW
+};
+
+/*
+ * Codec GPIO sticky
+ */
+enum wm97xx_gpio_sticky {
+    WM97XX_GPIO_STICKY,
+    WM97XX_GPIO_NOTSTICKY
+};
+
+/*
+ * Codec GPIO wake
+ */
+enum wm97xx_gpio_wake {
+    WM97XX_GPIO_WAKE,
+    WM97XX_GPIO_NOWAKE
+};
+
+/*
+ * Digitiser ioctl commands
+ */
+#define WM97XX_DIG_START	0x1
+#define WM97XX_DIG_STOP		0x2
+#define WM97XX_PHY_INIT		0x3
+#define WM97XX_AUX_PREPARE	0x4
+#define WM97XX_DIG_RESTORE	0x5
+
+struct wm97xx;
+
+extern struct wm97xx_codec_drv wm9705_codec;
+extern struct wm97xx_codec_drv wm9712_codec;
+extern struct wm97xx_codec_drv wm9713_codec;
+
+/*
+ * Codec driver interface - allows mapping to WM9705/12/13 and newer codecs
+ */
+struct wm97xx_codec_drv {
+	u16 id;
+	char *name;
+
+	/* read 1 sample */
+	int (*poll_sample) (struct wm97xx *, int adcsel, int *sample);
+
+	/* read X,Y,[P] in poll */
+	int (*poll_touch) (struct wm97xx *, struct wm97xx_data *);
+
+	int (*acc_enable) (struct wm97xx *, int enable);
+	void (*phy_init) (struct wm97xx *);
+	void (*dig_enable) (struct wm97xx *, int enable);
+	void (*dig_restore) (struct wm97xx *);
+	void (*aux_prepare) (struct wm97xx *);
+};
+
+
+/* Machine specific and accelerated touch operations */
+struct wm97xx_mach_ops {
+
+	/* accelerated touch readback - coords are transmited on AC97 link */
+	int acc_enabled;
+	void (*acc_pen_up) (struct wm97xx *);
+	int (*acc_pen_down) (struct wm97xx *);
+	int (*acc_startup) (struct wm97xx *);
+	void (*acc_shutdown) (struct wm97xx *);
+
+	/* interrupt mask control - required for accelerated operation */
+	void (*irq_enable) (struct wm97xx *, int enable);
+
+	/* GPIO pin used for accelerated operation */
+	int irq_gpio;
+
+	/* pre and post sample - can be used to minimise any analog noise */
+	void (*pre_sample) (int);  /* function to run before sampling */
+	void (*post_sample) (int);  /* function to run after sampling */
+};
+
+struct wm97xx {
+	u16 dig[3], id, gpio[6], misc;	/* Cached codec registers */
+	u16 dig_save[3];		/* saved during aux reading */
+	struct wm97xx_codec_drv *codec;	/* attached codec driver*/
+	struct input_dev *input_dev;	/* touchscreen input device */
+	struct snd_ac97 *ac97;		/* ALSA codec access */
+	struct device *dev;		/* ALSA device */
+	struct platform_device *battery_dev;
+	struct platform_device *touch_dev;
+	struct wm97xx_mach_ops *mach_ops;
+	struct mutex codec_mutex;
+	struct delayed_work ts_reader;  /* Used to poll touchscreen */
+	unsigned long ts_reader_interval; /* Current interval for timer */
+	unsigned long ts_reader_min_interval; /* Minimum interval */
+	unsigned int pen_irq;		/* Pen IRQ number in use */
+	struct workqueue_struct *ts_workq;
+	struct work_struct pen_event_work;
+	u16 acc_slot;			/* AC97 slot used for acc touch data */
+	u16 acc_rate;			/* acc touch data rate */
+	unsigned pen_is_down:1;		/* Pen is down */
+	unsigned aux_waiting:1;		/* aux measurement waiting */
+	unsigned pen_probably_down:1;	/* used in polling mode */
+	u16 variant;			/* WM97xx chip variant */
+	u16 suspend_mode;               /* PRP in suspend mode */
+};
+
+struct wm97xx_batt_pdata {
+	int	batt_aux;
+	int	temp_aux;
+	int	charge_gpio;
+	int	min_voltage;
+	int	max_voltage;
+	int	batt_div;
+	int	batt_mult;
+	int	temp_div;
+	int	temp_mult;
+	int	batt_tech;
+	char	*batt_name;
+};
+
+struct wm97xx_pdata {
+	struct wm97xx_batt_pdata	*batt_pdata;	/* battery data */
+};
+
+/*
+ * Codec GPIO access (not supported on WM9705)
+ * This can be used to set/get codec GPIO and Virtual GPIO status.
+ */
+enum wm97xx_gpio_status wm97xx_get_gpio(struct wm97xx *wm, u32 gpio);
+void wm97xx_set_gpio(struct wm97xx *wm, u32 gpio,
+			  enum wm97xx_gpio_status status);
+void wm97xx_config_gpio(struct wm97xx *wm, u32 gpio,
+				     enum wm97xx_gpio_dir dir,
+				     enum wm97xx_gpio_pol pol,
+				     enum wm97xx_gpio_sticky sticky,
+				     enum wm97xx_gpio_wake wake);
+
+void wm97xx_set_suspend_mode(struct wm97xx *wm, u16 mode);
+
+/* codec AC97 IO access */
+int wm97xx_reg_read(struct wm97xx *wm, u16 reg);
+void wm97xx_reg_write(struct wm97xx *wm, u16 reg, u16 val);
+
+/* aux adc readback */
+int wm97xx_read_aux_adc(struct wm97xx *wm, u16 adcsel);
+
+/* machine ops */
+int wm97xx_register_mach_ops(struct wm97xx *, struct wm97xx_mach_ops *);
+void wm97xx_unregister_mach_ops(struct wm97xx *);
+
+#endif
diff --git a/include/linux/wmt-efuse-stub.h b/include/linux/wmt-efuse-stub.h
new file mode 100755
index 00000000..d0111014
--- /dev/null
+++ b/include/linux/wmt-efuse-stub.h
@@ -0,0 +1,32 @@
+/*++ 
+ *
+ * Copyright c 2014  WonderMedia  Technologies, Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify 
+ * it under the terms of the GNU General Public License as published by 
+ * the Free Software Foundation, either version 2 of the License, or 
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, 
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+ * GNU General Public License for more details. 
+ *
+ * You should have received a copy of the GNU General Public License 
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * WonderMedia Technologies, Inc.
+ * 4F, 533, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C
+--*/
+
+#ifndef WMT_EFUSE_STUB_H
+/* To assert that only one occurrence is included */
+#define WMT_EFUSE_STUB_H
+
+typedef int (*EFUSE_READ_OTP_STUB) (int type, unsigned char *rbuf, int rlen);
+
+extern EFUSE_READ_OTP_STUB wmt_efuse_read_otp;
+
+#endif /* ifndef WMT_EFUSE_STUB */
+
+/*=== END wmt-efuse-stub.h ==========================================================*/
diff --git a/include/linux/wmt-mb.h b/include/linux/wmt-mb.h
new file mode 100755
index 00000000..8c1a48d7
--- /dev/null
+++ b/include/linux/wmt-mb.h
@@ -0,0 +1,101 @@
+/*++
+ * WonderMedia Memory Block driver
+ *
+ * Copyright c 2010  WonderMedia  Technologies, Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * WonderMedia Technologies, Inc.
+ * 10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C
+--*/
+#ifndef MEMBLOCK_H
+#define MEMBLOCK_H
+
+#include <linux/types.h>
+
+struct prdt_struct{
+    unsigned int addr;
+    unsigned short size;
+    unsigned short reserve : 15;
+    unsigned short EDT : 1;
+}__attribute__((packed)) ;
+
+struct mmu_table_info{
+    unsigned int addr;
+    unsigned int size;
+    unsigned int offset;
+}__attribute__((packed)) ;
+
+// 1 presents the task init that would never be released
+#define MB_DEF_TGID				0
+
+#ifdef CONFIG_WMT_MB_RESERVE_FROM_IO
+#define mb_virt_to_phys(v)    mb_do_virt_to_phys(v,MB_DEF_TGID,THE_MB_USER)
+#define mb_phys_to_virt(p)    mb_do_phys_to_virt(p,MB_DEF_TGID,THE_MB_USER)
+#else
+#define mb_virt_to_phys(v)    virt_to_phys(v)
+#define mb_phys_to_virt(p)    phys_to_virt(p)
+#endif
+#define mb_user_to_virt(u)    mb_do_user_to_virt(u,MB_DEF_TGID,THE_MB_USER)
+#define mb_user_to_phys(u)    mb_do_user_to_phys(u,MB_DEF_TGID,THE_MB_USER)
+/* all addresses are physical */
+#define mb_alloc(s)           mb_do_alloc(s,MB_DEF_TGID,THE_MB_USER)
+#define mb_free(p)            mb_do_free(p,MB_DEF_TGID,THE_MB_USER)
+#define mb_get(p)             mb_do_get(p,MB_DEF_TGID,THE_MB_USER)
+#define mb_put(p)             mb_do_put(p,MB_DEF_TGID,THE_MB_USER)
+#define mb_counter(p)         mb_do_counter(p,THE_MB_USER)
+
+void *mb_do_phys_to_virt(unsigned long phys, pid_t, char *);
+unsigned long mb_do_virt_to_phys(void *virt, pid_t, char *);
+unsigned long mb_do_user_to_virt(unsigned long, pid_t, char *);
+unsigned long mb_do_user_to_phys(unsigned long, pid_t, char *);
+unsigned long mb_do_alloc(unsigned long, pid_t, char *);
+int mb_do_free(unsigned long, pid_t, char *);
+int mb_do_get(unsigned long, pid_t, char *);
+int mb_do_put(unsigned long, pid_t, char *);
+int mb_do_counter(unsigned long, char *);
+
+int user_to_prdt(
+    unsigned long user,
+    unsigned int size,
+    struct prdt_struct *next,
+    unsigned int items);
+
+unsigned int wmt_mmu_table_size(unsigned int size);
+void wmt_mmu_table_dump(struct mmu_table_info *info);
+// To fix framebuffer build issue
+#if 0
+int wmt_mmu_table_check(
+    unsigned int mmuPhys,
+    unsigned int mmuSize,
+    unsigned int size);
+unsigned int wmt_mmu_table_from_phys(
+    unsigned int mmuPhys,
+    unsigned int mmuSize,
+    unsigned int addr,
+    unsigned int size);
+unsigned int wmt_mmu_table_from_user(
+    unsigned int mmuPhys,
+    unsigned int mmuSize,
+    unsigned int user,
+    unsigned int size);
+#endif
+unsigned int wmt_mmu_table_create(
+    unsigned int addr,
+    unsigned int size,
+    unsigned int addrType,
+    struct mmu_table_info *info);
+unsigned int wmt_mmu_table_destroy(struct mmu_table_info *info);
+
+#endif
diff --git a/include/linux/wmt-se.h b/include/linux/wmt-se.h
new file mode 100755
index 00000000..41382643
--- /dev/null
+++ b/include/linux/wmt-se.h
@@ -0,0 +1,37 @@
+/*++ 
+ * WonderMedia cipher driver 
+ *
+ * Copyright c 2012  WonderMedia  Technologies, Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify 
+ * it under the terms of the GNU General Public License as published by 
+ * the Free Software Foundation, either version 2 of the License, or 
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, 
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+ * GNU General Public License for more details. 
+ *
+ * You should have received a copy of the GNU General Public License 
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * WonderMedia Technologies, Inc.
+ * 4F, 533, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C
+--*/
+
+#ifndef WMT_SE_H
+/* To assert that only one occurrence is included */
+#define WMT_SE_H
+
+
+typedef int (*SE_FPTR)(unsigned char *buf_in, unsigned char *buf_out, int buf_len);
+
+extern SE_FPTR wmt_se_aes;
+extern SE_FPTR wmt_se_aes_core;
+extern SE_FPTR wmt_se_sha;
+
+
+#endif /* ifndef WMT_SE_H */
+
+/*=== END wmt-se.h ==========================================================*/
diff --git a/include/linux/wmt_battery.h b/include/linux/wmt_battery.h
new file mode 100755
index 00000000..eaca14c1
--- /dev/null
+++ b/include/linux/wmt_battery.h
@@ -0,0 +1,37 @@
+/*++
+linux/arch/arm/mach-wmt/board.c
+
+Copyright (c) 2008  WonderMedia Technologies, Inc.
+
+This program is free software: you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software Foundation,
+either version 2 of the License, or (at your option) any later version.
+
+This program is distributed in the hope that it will be useful, but WITHOUT
+ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+You should have received a copy of the GNU General Public License along with
+this program.  If not, see <http://www.gnu.org/licenses/>.
+
+WonderMedia Technologies, Inc.
+10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
+--*/
+#ifndef _LINUX_WMT_BAT_H
+#define _LINUX_WMT_BAT_H
+
+
+struct wmt_battery_info {
+	int	batt_aux;
+	int	temp_aux;
+	int	charge_gpio;
+	int	min_voltage;
+	int	max_voltage;
+	int	batt_div;
+	int	batt_mult;
+	int	temp_div;
+	int	temp_mult;
+	int	batt_tech;
+	char *batt_name;
+};
+
+#endif
diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h
new file mode 100644
index 00000000..af155450
--- /dev/null
+++ b/include/linux/workqueue.h
@@ -0,0 +1,450 @@
+/*
+ * workqueue.h --- work queue handling for Linux.
+ */
+
+#ifndef _LINUX_WORKQUEUE_H
+#define _LINUX_WORKQUEUE_H
+
+#include <linux/timer.h>
+#include <linux/linkage.h>
+#include <linux/bitops.h>
+#include <linux/lockdep.h>
+#include <linux/threads.h>
+#include <linux/atomic.h>
+
+struct workqueue_struct;
+
+struct work_struct;
+typedef void (*work_func_t)(struct work_struct *work);
+
+/*
+ * The first word is the work queue pointer and the flags rolled into
+ * one
+ */
+#define work_data_bits(work) ((unsigned long *)(&(work)->data))
+
+enum {
+	WORK_STRUCT_PENDING_BIT	= 0,	/* work item is pending execution */
+	WORK_STRUCT_DELAYED_BIT	= 1,	/* work item is delayed */
+	WORK_STRUCT_CWQ_BIT	= 2,	/* data points to cwq */
+	WORK_STRUCT_LINKED_BIT	= 3,	/* next work is linked to this one */
+#ifdef CONFIG_DEBUG_OBJECTS_WORK
+	WORK_STRUCT_STATIC_BIT	= 4,	/* static initializer (debugobjects) */
+	WORK_STRUCT_COLOR_SHIFT	= 5,	/* color for workqueue flushing */
+#else
+	WORK_STRUCT_COLOR_SHIFT	= 4,	/* color for workqueue flushing */
+#endif
+
+	WORK_STRUCT_COLOR_BITS	= 4,
+
+	WORK_STRUCT_PENDING	= 1 << WORK_STRUCT_PENDING_BIT,
+	WORK_STRUCT_DELAYED	= 1 << WORK_STRUCT_DELAYED_BIT,
+	WORK_STRUCT_CWQ		= 1 << WORK_STRUCT_CWQ_BIT,
+	WORK_STRUCT_LINKED	= 1 << WORK_STRUCT_LINKED_BIT,
+#ifdef CONFIG_DEBUG_OBJECTS_WORK
+	WORK_STRUCT_STATIC	= 1 << WORK_STRUCT_STATIC_BIT,
+#else
+	WORK_STRUCT_STATIC	= 0,
+#endif
+
+	/*
+	 * The last color is no color used for works which don't
+	 * participate in workqueue flushing.
+	 */
+	WORK_NR_COLORS		= (1 << WORK_STRUCT_COLOR_BITS) - 1,
+	WORK_NO_COLOR		= WORK_NR_COLORS,
+
+	/* special cpu IDs */
+	WORK_CPU_UNBOUND	= NR_CPUS,
+	WORK_CPU_NONE		= NR_CPUS + 1,
+	WORK_CPU_LAST		= WORK_CPU_NONE,
+
+	/*
+	 * Reserve 7 bits off of cwq pointer w/ debugobjects turned
+	 * off.  This makes cwqs aligned to 256 bytes and allows 15
+	 * workqueue flush colors.
+	 */
+	WORK_STRUCT_FLAG_BITS	= WORK_STRUCT_COLOR_SHIFT +
+				  WORK_STRUCT_COLOR_BITS,
+
+	WORK_STRUCT_FLAG_MASK	= (1UL << WORK_STRUCT_FLAG_BITS) - 1,
+	WORK_STRUCT_WQ_DATA_MASK = ~WORK_STRUCT_FLAG_MASK,
+	WORK_STRUCT_NO_CPU	= WORK_CPU_NONE << WORK_STRUCT_FLAG_BITS,
+
+	/* bit mask for work_busy() return values */
+	WORK_BUSY_PENDING	= 1 << 0,
+	WORK_BUSY_RUNNING	= 1 << 1,
+};
+
+struct work_struct {
+	atomic_long_t data;
+	struct list_head entry;
+	work_func_t func;
+#ifdef CONFIG_LOCKDEP
+	struct lockdep_map lockdep_map;
+#endif
+};
+
+#define WORK_DATA_INIT()	ATOMIC_LONG_INIT(WORK_STRUCT_NO_CPU)
+#define WORK_DATA_STATIC_INIT()	\
+	ATOMIC_LONG_INIT(WORK_STRUCT_NO_CPU | WORK_STRUCT_STATIC)
+
+struct delayed_work {
+	struct work_struct work;
+	struct timer_list timer;
+};
+
+static inline struct delayed_work *to_delayed_work(struct work_struct *work)
+{
+	return container_of(work, struct delayed_work, work);
+}
+
+struct execute_work {
+	struct work_struct work;
+};
+
+#ifdef CONFIG_LOCKDEP
+/*
+ * NB: because we have to copy the lockdep_map, setting _key
+ * here is required, otherwise it could get initialised to the
+ * copy of the lockdep_map!
+ */
+#define __WORK_INIT_LOCKDEP_MAP(n, k) \
+	.lockdep_map = STATIC_LOCKDEP_MAP_INIT(n, k),
+#else
+#define __WORK_INIT_LOCKDEP_MAP(n, k)
+#endif
+
+#define __WORK_INITIALIZER(n, f) {				\
+	.data = WORK_DATA_STATIC_INIT(),			\
+	.entry	= { &(n).entry, &(n).entry },			\
+	.func = (f),						\
+	__WORK_INIT_LOCKDEP_MAP(#n, &(n))			\
+	}
+
+#define __DELAYED_WORK_INITIALIZER(n, f) {			\
+	.work = __WORK_INITIALIZER((n).work, (f)),		\
+	.timer = TIMER_INITIALIZER(NULL, 0, 0),			\
+	}
+
+#define __DEFERRED_WORK_INITIALIZER(n, f) {			\
+	.work = __WORK_INITIALIZER((n).work, (f)),		\
+	.timer = TIMER_DEFERRED_INITIALIZER(NULL, 0, 0),	\
+	}
+
+#define DECLARE_WORK(n, f)					\
+	struct work_struct n = __WORK_INITIALIZER(n, f)
+
+#define DECLARE_DELAYED_WORK(n, f)				\
+	struct delayed_work n = __DELAYED_WORK_INITIALIZER(n, f)
+
+#define DECLARE_DEFERRED_WORK(n, f)				\
+	struct delayed_work n = __DEFERRED_WORK_INITIALIZER(n, f)
+
+/*
+ * initialize a work item's function pointer
+ */
+#define PREPARE_WORK(_work, _func)				\
+	do {							\
+		(_work)->func = (_func);			\
+	} while (0)
+
+#define PREPARE_DELAYED_WORK(_work, _func)			\
+	PREPARE_WORK(&(_work)->work, (_func))
+
+#ifdef CONFIG_DEBUG_OBJECTS_WORK
+extern void __init_work(struct work_struct *work, int onstack);
+extern void destroy_work_on_stack(struct work_struct *work);
+static inline unsigned int work_static(struct work_struct *work)
+{
+	return *work_data_bits(work) & WORK_STRUCT_STATIC;
+}
+#else
+static inline void __init_work(struct work_struct *work, int onstack) { }
+static inline void destroy_work_on_stack(struct work_struct *work) { }
+static inline unsigned int work_static(struct work_struct *work) { return 0; }
+#endif
+
+/*
+ * initialize all of a work item in one go
+ *
+ * NOTE! No point in using "atomic_long_set()": using a direct
+ * assignment of the work data initializer allows the compiler
+ * to generate better code.
+ */
+#ifdef CONFIG_LOCKDEP
+#define __INIT_WORK(_work, _func, _onstack)				\
+	do {								\
+		static struct lock_class_key __key;			\
+									\
+		__init_work((_work), _onstack);				\
+		(_work)->data = (atomic_long_t) WORK_DATA_INIT();	\
+		lockdep_init_map(&(_work)->lockdep_map, #_work, &__key, 0);\
+		INIT_LIST_HEAD(&(_work)->entry);			\
+		PREPARE_WORK((_work), (_func));				\
+	} while (0)
+#else
+#define __INIT_WORK(_work, _func, _onstack)				\
+	do {								\
+		__init_work((_work), _onstack);				\
+		(_work)->data = (atomic_long_t) WORK_DATA_INIT();	\
+		INIT_LIST_HEAD(&(_work)->entry);			\
+		PREPARE_WORK((_work), (_func));				\
+	} while (0)
+#endif
+
+#define INIT_WORK(_work, _func)					\
+	do {							\
+		__INIT_WORK((_work), (_func), 0);		\
+	} while (0)
+
+#define INIT_WORK_ONSTACK(_work, _func)				\
+	do {							\
+		__INIT_WORK((_work), (_func), 1);		\
+	} while (0)
+
+#define INIT_DELAYED_WORK(_work, _func)				\
+	do {							\
+		INIT_WORK(&(_work)->work, (_func));		\
+		init_timer(&(_work)->timer);			\
+	} while (0)
+
+#define INIT_DELAYED_WORK_ONSTACK(_work, _func)			\
+	do {							\
+		INIT_WORK_ONSTACK(&(_work)->work, (_func));	\
+		init_timer_on_stack(&(_work)->timer);		\
+	} while (0)
+
+#define INIT_DELAYED_WORK_DEFERRABLE(_work, _func)		\
+	do {							\
+		INIT_WORK(&(_work)->work, (_func));		\
+		init_timer_deferrable(&(_work)->timer);		\
+	} while (0)
+
+/**
+ * work_pending - Find out whether a work item is currently pending
+ * @work: The work item in question
+ */
+#define work_pending(work) \
+	test_bit(WORK_STRUCT_PENDING_BIT, work_data_bits(work))
+
+/**
+ * delayed_work_pending - Find out whether a delayable work item is currently
+ * pending
+ * @work: The work item in question
+ */
+#define delayed_work_pending(w) \
+	work_pending(&(w)->work)
+
+/**
+ * work_clear_pending - for internal use only, mark a work item as not pending
+ * @work: The work item in question
+ */
+#define work_clear_pending(work) \
+	clear_bit(WORK_STRUCT_PENDING_BIT, work_data_bits(work))
+
+/*
+ * Workqueue flags and constants.  For details, please refer to
+ * Documentation/workqueue.txt.
+ */
+enum {
+	WQ_NON_REENTRANT	= 1 << 0, /* guarantee non-reentrance */
+	WQ_UNBOUND		= 1 << 1, /* not bound to any cpu */
+	WQ_FREEZABLE		= 1 << 2, /* freeze during suspend */
+	WQ_MEM_RECLAIM		= 1 << 3, /* may be used for memory reclaim */
+	WQ_HIGHPRI		= 1 << 4, /* high priority */
+	WQ_CPU_INTENSIVE	= 1 << 5, /* cpu instensive workqueue */
+
+	WQ_DRAINING		= 1 << 6, /* internal: workqueue is draining */
+	WQ_RESCUER		= 1 << 7, /* internal: workqueue has rescuer */
+
+	WQ_MAX_ACTIVE		= 512,	  /* I like 512, better ideas? */
+	WQ_MAX_UNBOUND_PER_CPU	= 4,	  /* 4 * #cpus for unbound wq */
+	WQ_DFL_ACTIVE		= WQ_MAX_ACTIVE / 2,
+};
+
+/* unbound wq's aren't per-cpu, scale max_active according to #cpus */
+#define WQ_UNBOUND_MAX_ACTIVE	\
+	max_t(int, WQ_MAX_ACTIVE, num_possible_cpus() * WQ_MAX_UNBOUND_PER_CPU)
+
+/*
+ * System-wide workqueues which are always present.
+ *
+ * system_wq is the one used by schedule[_delayed]_work[_on]().
+ * Multi-CPU multi-threaded.  There are users which expect relatively
+ * short queue flush time.  Don't queue works which can run for too
+ * long.
+ *
+ * system_long_wq is similar to system_wq but may host long running
+ * works.  Queue flushing might take relatively long.
+ *
+ * system_nrt_wq is non-reentrant and guarantees that any given work
+ * item is never executed in parallel by multiple CPUs.  Queue
+ * flushing might take relatively long.
+ *
+ * system_unbound_wq is unbound workqueue.  Workers are not bound to
+ * any specific CPU, not concurrency managed, and all queued works are
+ * executed immediately as long as max_active limit is not reached and
+ * resources are available.
+ *
+ * system_freezable_wq is equivalent to system_wq except that it's
+ * freezable.
+ *
+ * system_nrt_freezable_wq is equivalent to system_nrt_wq except that
+ * it's freezable.
+ */
+extern struct workqueue_struct *system_wq;
+extern struct workqueue_struct *system_long_wq;
+extern struct workqueue_struct *system_nrt_wq;
+extern struct workqueue_struct *system_unbound_wq;
+extern struct workqueue_struct *system_freezable_wq;
+extern struct workqueue_struct *system_nrt_freezable_wq;
+
+extern struct workqueue_struct *
+__alloc_workqueue_key(const char *fmt, unsigned int flags, int max_active,
+	struct lock_class_key *key, const char *lock_name, ...) __printf(1, 6);
+
+/**
+ * alloc_workqueue - allocate a workqueue
+ * @fmt: printf format for the name of the workqueue
+ * @flags: WQ_* flags
+ * @max_active: max in-flight work items, 0 for default
+ * @args: args for @fmt
+ *
+ * Allocate a workqueue with the specified parameters.  For detailed
+ * information on WQ_* flags, please refer to Documentation/workqueue.txt.
+ *
+ * The __lock_name macro dance is to guarantee that single lock_class_key
+ * doesn't end up with different namesm, which isn't allowed by lockdep.
+ *
+ * RETURNS:
+ * Pointer to the allocated workqueue on success, %NULL on failure.
+ */
+#ifdef CONFIG_LOCKDEP
+#define alloc_workqueue(fmt, flags, max_active, args...)	\
+({								\
+	static struct lock_class_key __key;			\
+	const char *__lock_name;				\
+								\
+	if (__builtin_constant_p(fmt))				\
+		__lock_name = (fmt);				\
+	else							\
+		__lock_name = #fmt;				\
+								\
+	__alloc_workqueue_key((fmt), (flags), (max_active),	\
+			      &__key, __lock_name, ##args);	\
+})
+#else
+#define alloc_workqueue(fmt, flags, max_active, args...)	\
+	__alloc_workqueue_key((fmt), (flags), (max_active),	\
+			      NULL, NULL, ##args)
+#endif
+
+/**
+ * alloc_ordered_workqueue - allocate an ordered workqueue
+ * @fmt: printf format for the name of the workqueue
+ * @flags: WQ_* flags (only WQ_FREEZABLE and WQ_MEM_RECLAIM are meaningful)
+ * @args: args for @fmt
+ *
+ * Allocate an ordered workqueue.  An ordered workqueue executes at
+ * most one work item at any given time in the queued order.  They are
+ * implemented as unbound workqueues with @max_active of one.
+ *
+ * RETURNS:
+ * Pointer to the allocated workqueue on success, %NULL on failure.
+ */
+#define alloc_ordered_workqueue(fmt, flags, args...)		\
+	alloc_workqueue(fmt, WQ_UNBOUND | (flags), 1, ##args)
+
+#define create_workqueue(name)					\
+	alloc_workqueue((name), WQ_MEM_RECLAIM, 1)
+#define create_freezable_workqueue(name)			\
+	alloc_workqueue((name), WQ_FREEZABLE | WQ_UNBOUND | WQ_MEM_RECLAIM, 1)
+#define create_singlethread_workqueue(name)			\
+	alloc_workqueue((name), WQ_UNBOUND | WQ_MEM_RECLAIM, 1)
+
+extern void destroy_workqueue(struct workqueue_struct *wq);
+
+extern int queue_work(struct workqueue_struct *wq, struct work_struct *work);
+extern int queue_work_on(int cpu, struct workqueue_struct *wq,
+			struct work_struct *work);
+extern int queue_delayed_work(struct workqueue_struct *wq,
+			struct delayed_work *work, unsigned long delay);
+extern int queue_delayed_work_on(int cpu, struct workqueue_struct *wq,
+			struct delayed_work *work, unsigned long delay);
+
+extern void flush_workqueue(struct workqueue_struct *wq);
+extern void drain_workqueue(struct workqueue_struct *wq);
+extern void flush_scheduled_work(void);
+
+extern int schedule_work(struct work_struct *work);
+extern int schedule_work_on(int cpu, struct work_struct *work);
+extern int schedule_delayed_work(struct delayed_work *work, unsigned long delay);
+extern int schedule_delayed_work_on(int cpu, struct delayed_work *work,
+					unsigned long delay);
+extern int schedule_on_each_cpu(work_func_t func);
+extern int keventd_up(void);
+
+int execute_in_process_context(work_func_t fn, struct execute_work *);
+
+extern bool flush_work(struct work_struct *work);
+extern bool flush_work_sync(struct work_struct *work);
+extern bool cancel_work_sync(struct work_struct *work);
+
+extern bool flush_delayed_work(struct delayed_work *dwork);
+extern bool flush_delayed_work_sync(struct delayed_work *work);
+extern bool cancel_delayed_work_sync(struct delayed_work *dwork);
+
+extern void workqueue_set_max_active(struct workqueue_struct *wq,
+				     int max_active);
+extern bool workqueue_congested(unsigned int cpu, struct workqueue_struct *wq);
+extern unsigned int work_cpu(struct work_struct *work);
+extern unsigned int work_busy(struct work_struct *work);
+
+/*
+ * Kill off a pending schedule_delayed_work().  Note that the work callback
+ * function may still be running on return from cancel_delayed_work(), unless
+ * it returns 1 and the work doesn't re-arm itself. Run flush_workqueue() or
+ * cancel_work_sync() to wait on it.
+ */
+static inline bool cancel_delayed_work(struct delayed_work *work)
+{
+	bool ret;
+
+	ret = del_timer_sync(&work->timer);
+	if (ret)
+		work_clear_pending(&work->work);
+	return ret;
+}
+
+/*
+ * Like above, but uses del_timer() instead of del_timer_sync(). This means,
+ * if it returns 0 the timer function may be running and the queueing is in
+ * progress.
+ */
+static inline bool __cancel_delayed_work(struct delayed_work *work)
+{
+	bool ret;
+
+	ret = del_timer(&work->timer);
+	if (ret)
+		work_clear_pending(&work->work);
+	return ret;
+}
+
+#ifndef CONFIG_SMP
+static inline long work_on_cpu(unsigned int cpu, long (*fn)(void *), void *arg)
+{
+	return fn(arg);
+}
+#else
+long work_on_cpu(unsigned int cpu, long (*fn)(void *), void *arg);
+#endif /* CONFIG_SMP */
+
+#ifdef CONFIG_FREEZER
+extern void freeze_workqueues_begin(void);
+extern bool freeze_workqueues_busy(void);
+extern void thaw_workqueues(void);
+#endif /* CONFIG_FREEZER */
+
+#endif
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
new file mode 100644
index 00000000..a2b84f59
--- /dev/null
+++ b/include/linux/writeback.h
@@ -0,0 +1,201 @@
+/*
+ * include/linux/writeback.h
+ */
+#ifndef WRITEBACK_H
+#define WRITEBACK_H
+
+#include <linux/sched.h>
+#include <linux/fs.h>
+
+DECLARE_PER_CPU(int, dirty_throttle_leaks);
+
+/*
+ * The 1/4 region under the global dirty thresh is for smooth dirty throttling:
+ *
+ *	(thresh - thresh/DIRTY_FULL_SCOPE, thresh)
+ *
+ * Further beyond, all dirtier tasks will enter a loop waiting (possibly long
+ * time) for the dirty pages to drop, unless written enough pages.
+ *
+ * The global dirty threshold is normally equal to the global dirty limit,
+ * except when the system suddenly allocates a lot of anonymous memory and
+ * knocks down the global dirty threshold quickly, in which case the global
+ * dirty limit will follow down slowly to prevent livelocking all dirtier tasks.
+ */
+#define DIRTY_SCOPE		8
+#define DIRTY_FULL_SCOPE	(DIRTY_SCOPE / 2)
+
+struct backing_dev_info;
+
+/*
+ * fs/fs-writeback.c
+ */
+enum writeback_sync_modes {
+	WB_SYNC_NONE,	/* Don't wait on anything */
+	WB_SYNC_ALL,	/* Wait on every mapping */
+};
+
+/*
+ * why some writeback work was initiated
+ */
+enum wb_reason {
+	WB_REASON_BACKGROUND,
+	WB_REASON_TRY_TO_FREE_PAGES,
+	WB_REASON_SYNC,
+	WB_REASON_PERIODIC,
+	WB_REASON_LAPTOP_TIMER,
+	WB_REASON_FREE_MORE_MEM,
+	WB_REASON_FS_FREE_SPACE,
+	WB_REASON_FORKER_THREAD,
+
+	WB_REASON_MAX,
+};
+extern const char *wb_reason_name[];
+
+/*
+ * A control structure which tells the writeback code what to do.  These are
+ * always on the stack, and hence need no locking.  They are always initialised
+ * in a manner such that unspecified fields are set to zero.
+ */
+struct writeback_control {
+	enum writeback_sync_modes sync_mode;
+	long nr_to_write;		/* Write this many pages, and decrement
+					   this for each page written */
+	long pages_skipped;		/* Pages which were not written */
+
+	/*
+	 * For a_ops->writepages(): if start or end are non-zero then this is
+	 * a hint that the filesystem need only write out the pages inside that
+	 * byterange.  The byte at `end' is included in the writeout request.
+	 */
+	loff_t range_start;
+	loff_t range_end;
+
+	unsigned for_kupdate:1;		/* A kupdate writeback */
+	unsigned for_background:1;	/* A background writeback */
+	unsigned tagged_writepages:1;	/* tag-and-write to avoid livelock */
+	unsigned for_reclaim:1;		/* Invoked from the page allocator */
+	unsigned range_cyclic:1;	/* range_start is cyclic */
+};
+
+/*
+ * fs/fs-writeback.c
+ */	
+struct bdi_writeback;
+int inode_wait(void *);
+void writeback_inodes_sb(struct super_block *, enum wb_reason reason);
+void writeback_inodes_sb_nr(struct super_block *, unsigned long nr,
+							enum wb_reason reason);
+int writeback_inodes_sb_if_idle(struct super_block *, enum wb_reason reason);
+int writeback_inodes_sb_nr_if_idle(struct super_block *, unsigned long nr,
+							enum wb_reason reason);
+void sync_inodes_sb(struct super_block *);
+long writeback_inodes_wb(struct bdi_writeback *wb, long nr_pages,
+				enum wb_reason reason);
+long wb_do_writeback(struct bdi_writeback *wb, int force_wait);
+void wakeup_flusher_threads(long nr_pages, enum wb_reason reason);
+
+/* writeback.h requires fs.h; it, too, is not included from here. */
+static inline void wait_on_inode(struct inode *inode)
+{
+	might_sleep();
+	wait_on_bit(&inode->i_state, __I_NEW, inode_wait, TASK_UNINTERRUPTIBLE);
+}
+static inline void inode_sync_wait(struct inode *inode)
+{
+	might_sleep();
+	wait_on_bit(&inode->i_state, __I_SYNC, inode_wait,
+							TASK_UNINTERRUPTIBLE);
+}
+
+
+/*
+ * mm/page-writeback.c
+ */
+#ifdef CONFIG_BLOCK
+void laptop_io_completion(struct backing_dev_info *info);
+void laptop_sync_completion(void);
+void laptop_mode_sync(struct work_struct *work);
+void laptop_mode_timer_fn(unsigned long data);
+#else
+static inline void laptop_sync_completion(void) { }
+#endif
+void throttle_vm_writeout(gfp_t gfp_mask);
+bool zone_dirty_ok(struct zone *zone);
+
+extern unsigned long global_dirty_limit;
+
+/* These are exported to sysctl. */
+extern int dirty_background_ratio;
+extern unsigned long dirty_background_bytes;
+extern int vm_dirty_ratio;
+extern unsigned long vm_dirty_bytes;
+extern unsigned int dirty_writeback_interval;
+extern unsigned int dirty_expire_interval;
+extern int vm_highmem_is_dirtyable;
+extern int block_dump;
+extern int laptop_mode;
+
+extern int dirty_background_ratio_handler(struct ctl_table *table, int write,
+		void __user *buffer, size_t *lenp,
+		loff_t *ppos);
+extern int dirty_background_bytes_handler(struct ctl_table *table, int write,
+		void __user *buffer, size_t *lenp,
+		loff_t *ppos);
+extern int dirty_ratio_handler(struct ctl_table *table, int write,
+		void __user *buffer, size_t *lenp,
+		loff_t *ppos);
+extern int dirty_bytes_handler(struct ctl_table *table, int write,
+		void __user *buffer, size_t *lenp,
+		loff_t *ppos);
+
+struct ctl_table;
+int dirty_writeback_centisecs_handler(struct ctl_table *, int,
+				      void __user *, size_t *, loff_t *);
+
+void global_dirty_limits(unsigned long *pbackground, unsigned long *pdirty);
+unsigned long bdi_dirty_limit(struct backing_dev_info *bdi,
+			       unsigned long dirty);
+
+void __bdi_update_bandwidth(struct backing_dev_info *bdi,
+			    unsigned long thresh,
+			    unsigned long bg_thresh,
+			    unsigned long dirty,
+			    unsigned long bdi_thresh,
+			    unsigned long bdi_dirty,
+			    unsigned long start_time);
+
+void page_writeback_init(void);
+void balance_dirty_pages_ratelimited_nr(struct address_space *mapping,
+					unsigned long nr_pages_dirtied);
+
+static inline void
+balance_dirty_pages_ratelimited(struct address_space *mapping)
+{
+	balance_dirty_pages_ratelimited_nr(mapping, 1);
+}
+
+typedef int (*writepage_t)(struct page *page, struct writeback_control *wbc,
+				void *data);
+
+int generic_writepages(struct address_space *mapping,
+		       struct writeback_control *wbc);
+void tag_pages_for_writeback(struct address_space *mapping,
+			     pgoff_t start, pgoff_t end);
+int write_cache_pages(struct address_space *mapping,
+		      struct writeback_control *wbc, writepage_t writepage,
+		      void *data);
+int do_writepages(struct address_space *mapping, struct writeback_control *wbc);
+void set_page_dirty_balance(struct page *page, int page_mkwrite);
+void writeback_set_ratelimit(void);
+void tag_pages_for_writeback(struct address_space *mapping,
+			     pgoff_t start, pgoff_t end);
+
+void account_page_redirty(struct page *page);
+
+/* pdflush.c */
+extern int nr_pdflush_threads;	/* Global so it can be exported to sysctl
+				   read-only. */
+
+
+#endif		/* WRITEBACK_H */
diff --git a/include/linux/x25.h b/include/linux/x25.h
new file mode 100644
index 00000000..810cce67
--- /dev/null
+++ b/include/linux/x25.h
@@ -0,0 +1,152 @@
+/*
+ * These are the public elements of the Linux kernel X.25 implementation.
+ *
+ * 	History
+ *	mar/20/00	Daniela Squassoni Disabling/enabling of facilities 
+ *					  negotiation.
+ *	apr/02/05	Shaun Pereira Selective sub address matching with
+ *					call user data
+ */
+
+#ifndef	X25_KERNEL_H
+#define	X25_KERNEL_H
+
+#include <linux/types.h>
+#include <linux/socket.h>
+
+#define	SIOCX25GSUBSCRIP	(SIOCPROTOPRIVATE + 0)
+#define	SIOCX25SSUBSCRIP	(SIOCPROTOPRIVATE + 1)
+#define	SIOCX25GFACILITIES	(SIOCPROTOPRIVATE + 2)
+#define	SIOCX25SFACILITIES	(SIOCPROTOPRIVATE + 3)
+#define	SIOCX25GCALLUSERDATA	(SIOCPROTOPRIVATE + 4)
+#define	SIOCX25SCALLUSERDATA	(SIOCPROTOPRIVATE + 5)
+#define	SIOCX25GCAUSEDIAG	(SIOCPROTOPRIVATE + 6)
+#define SIOCX25SCUDMATCHLEN	(SIOCPROTOPRIVATE + 7)
+#define SIOCX25CALLACCPTAPPRV   (SIOCPROTOPRIVATE + 8)
+#define SIOCX25SENDCALLACCPT    (SIOCPROTOPRIVATE + 9)
+#define SIOCX25GDTEFACILITIES (SIOCPROTOPRIVATE + 10)
+#define SIOCX25SDTEFACILITIES (SIOCPROTOPRIVATE + 11)
+#define SIOCX25SCAUSEDIAG	(SIOCPROTOPRIVATE + 12)
+
+/*
+ *	Values for {get,set}sockopt.
+ */
+#define	X25_QBITINCL		1
+
+/*
+ *	X.25 Packet Size values.
+ */
+#define	X25_PS16		4
+#define	X25_PS32		5
+#define	X25_PS64		6
+#define	X25_PS128		7
+#define	X25_PS256		8
+#define	X25_PS512		9
+#define	X25_PS1024		10
+#define	X25_PS2048		11
+#define	X25_PS4096		12
+
+/*
+ * An X.121 address, it is held as ASCII text, null terminated, up to 15
+ * digits and a null terminator.
+ */
+struct x25_address {
+	char x25_addr[16];
+};
+
+/*
+ *	Linux X.25 Address structure, used for bind, and connect mostly.
+ */
+struct sockaddr_x25 {
+	__kernel_sa_family_t sx25_family;	/* Must be AF_X25 */
+	struct x25_address sx25_addr;		/* X.121 Address */
+};
+
+/*
+ *	DTE/DCE subscription options.
+ *
+ *      As this is missing lots of options, user should expect major
+ *	changes of this structure in 2.5.x which might break compatibilty.
+ *      The somewhat ugly dimension 200-sizeof() is needed to maintain
+ *	backward compatibility.
+ */
+struct x25_subscrip_struct {
+	char device[200-sizeof(unsigned long)];
+	unsigned long	global_facil_mask;	/* 0 to disable negotiation */
+	unsigned int	extended;
+};
+
+/* values for above global_facil_mask */
+
+#define	X25_MASK_REVERSE	0x01	
+#define	X25_MASK_THROUGHPUT	0x02
+#define	X25_MASK_PACKET_SIZE	0x04
+#define	X25_MASK_WINDOW_SIZE	0x08
+
+#define X25_MASK_CALLING_AE 0x10
+#define X25_MASK_CALLED_AE 0x20
+
+
+/*
+ *	Routing table control structure.
+ */
+struct x25_route_struct {
+	struct x25_address address;
+	unsigned int	   sigdigits;
+	char		   device[200];
+};
+
+/*
+ *	Facilities structure.
+ */
+struct x25_facilities {
+	unsigned int	winsize_in, winsize_out;
+	unsigned int	pacsize_in, pacsize_out;
+	unsigned int	throughput;
+	unsigned int	reverse;
+};
+
+/*
+* ITU DTE facilities
+* Only the called and calling address
+* extension are currently implemented.
+* The rest are in place to avoid the struct
+* changing size if someone needs them later
+*/
+
+struct x25_dte_facilities {
+	__u16 delay_cumul;
+	__u16 delay_target;
+	__u16 delay_max;
+	__u8 min_throughput;
+	__u8 expedited;
+	__u8 calling_len;
+	__u8 called_len;
+	__u8 calling_ae[20];
+	__u8 called_ae[20];
+};
+
+/*
+ *	Call User Data structure.
+ */
+struct x25_calluserdata {
+	unsigned int	cudlength;
+	unsigned char	cuddata[128];
+};
+
+/*
+ *	Call clearing Cause and Diagnostic structure.
+ */
+struct x25_causediag {
+	unsigned char	cause;
+	unsigned char	diagnostic;
+};
+
+/*
+ *	Further optional call user data match length selection
+ */
+struct x25_subaddr {
+	unsigned int cudmatchlength;
+};
+
+#endif
diff --git a/include/linux/xattr.h b/include/linux/xattr.h
new file mode 100644
index 00000000..e5d12203
--- /dev/null
+++ b/include/linux/xattr.h
@@ -0,0 +1,101 @@
+/*
+  File: linux/xattr.h
+
+  Extended attributes handling.
+
+  Copyright (C) 2001 by Andreas Gruenbacher <a.gruenbacher@computer.org>
+  Copyright (c) 2001-2002 Silicon Graphics, Inc.  All Rights Reserved.
+  Copyright (c) 2004 Red Hat, Inc., James Morris <jmorris@redhat.com>
+*/
+#ifndef _LINUX_XATTR_H
+#define _LINUX_XATTR_H
+
+#define XATTR_CREATE	0x1	/* set value, fail if attr already exists */
+#define XATTR_REPLACE	0x2	/* set value, fail if attr does not exist */
+
+/* Namespaces */
+#define XATTR_OS2_PREFIX "os2."
+#define XATTR_OS2_PREFIX_LEN (sizeof (XATTR_OS2_PREFIX) - 1)
+
+#define XATTR_SECURITY_PREFIX	"security."
+#define XATTR_SECURITY_PREFIX_LEN (sizeof (XATTR_SECURITY_PREFIX) - 1)
+
+#define XATTR_SYSTEM_PREFIX "system."
+#define XATTR_SYSTEM_PREFIX_LEN (sizeof (XATTR_SYSTEM_PREFIX) - 1)
+
+#define XATTR_TRUSTED_PREFIX "trusted."
+#define XATTR_TRUSTED_PREFIX_LEN (sizeof (XATTR_TRUSTED_PREFIX) - 1)
+
+#define XATTR_USER_PREFIX "user."
+#define XATTR_USER_PREFIX_LEN (sizeof (XATTR_USER_PREFIX) - 1)
+
+/* Security namespace */
+#define XATTR_EVM_SUFFIX "evm"
+#define XATTR_NAME_EVM XATTR_SECURITY_PREFIX XATTR_EVM_SUFFIX
+
+#define XATTR_SELINUX_SUFFIX "selinux"
+#define XATTR_NAME_SELINUX XATTR_SECURITY_PREFIX XATTR_SELINUX_SUFFIX
+
+#define XATTR_SMACK_SUFFIX "SMACK64"
+#define XATTR_SMACK_IPIN "SMACK64IPIN"
+#define XATTR_SMACK_IPOUT "SMACK64IPOUT"
+#define XATTR_SMACK_EXEC "SMACK64EXEC"
+#define XATTR_SMACK_TRANSMUTE "SMACK64TRANSMUTE"
+#define XATTR_SMACK_MMAP "SMACK64MMAP"
+#define XATTR_NAME_SMACK XATTR_SECURITY_PREFIX XATTR_SMACK_SUFFIX
+#define XATTR_NAME_SMACKIPIN	XATTR_SECURITY_PREFIX XATTR_SMACK_IPIN
+#define XATTR_NAME_SMACKIPOUT	XATTR_SECURITY_PREFIX XATTR_SMACK_IPOUT
+#define XATTR_NAME_SMACKEXEC	XATTR_SECURITY_PREFIX XATTR_SMACK_EXEC
+#define XATTR_NAME_SMACKTRANSMUTE XATTR_SECURITY_PREFIX XATTR_SMACK_TRANSMUTE
+#define XATTR_NAME_SMACKMMAP XATTR_SECURITY_PREFIX XATTR_SMACK_MMAP
+
+#define XATTR_CAPS_SUFFIX "capability"
+#define XATTR_NAME_CAPS XATTR_SECURITY_PREFIX XATTR_CAPS_SUFFIX
+
+#define XATTR_POSIX_ACL_ACCESS  "posix_acl_access"
+#define XATTR_NAME_POSIX_ACL_ACCESS XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_ACCESS
+#define XATTR_POSIX_ACL_DEFAULT  "posix_acl_default"
+#define XATTR_NAME_POSIX_ACL_DEFAULT XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_DEFAULT
+
+#ifdef  __KERNEL__
+
+#include <linux/types.h>
+
+struct inode;
+struct dentry;
+
+struct xattr_handler {
+	const char *prefix;
+	int flags;	/* fs private flags passed back to the handlers */
+	size_t (*list)(struct dentry *dentry, char *list, size_t list_size,
+		       const char *name, size_t name_len, int handler_flags);
+	int (*get)(struct dentry *dentry, const char *name, void *buffer,
+		   size_t size, int handler_flags);
+	int (*set)(struct dentry *dentry, const char *name, const void *buffer,
+		   size_t size, int flags, int handler_flags);
+};
+
+struct xattr {
+	char *name;
+	void *value;
+	size_t value_len;
+};
+
+ssize_t xattr_getsecurity(struct inode *, const char *, void *, size_t);
+ssize_t vfs_getxattr(struct dentry *, const char *, void *, size_t);
+ssize_t vfs_listxattr(struct dentry *d, char *list, size_t size);
+int __vfs_setxattr_noperm(struct dentry *, const char *, const void *, size_t, int);
+int vfs_setxattr(struct dentry *, const char *, const void *, size_t, int);
+int vfs_removexattr(struct dentry *, const char *);
+
+ssize_t generic_getxattr(struct dentry *dentry, const char *name, void *buffer, size_t size);
+ssize_t generic_listxattr(struct dentry *dentry, char *buffer, size_t buffer_size);
+int generic_setxattr(struct dentry *dentry, const char *name, const void *value, size_t size, int flags);
+int generic_removexattr(struct dentry *dentry, const char *name);
+ssize_t vfs_getxattr_alloc(struct dentry *dentry, const char *name,
+			   char **xattr_value, size_t size, gfp_t flags);
+int vfs_xattr_cmp(struct dentry *dentry, const char *xattr_name,
+		  const char *value, size_t size, gfp_t flags);
+#endif  /*  __KERNEL__  */
+
+#endif	/* _LINUX_XATTR_H */
diff --git a/include/linux/xfrm.h b/include/linux/xfrm.h
new file mode 100644
index 00000000..22e61fdf
--- /dev/null
+++ b/include/linux/xfrm.h
@@ -0,0 +1,504 @@
+#ifndef _LINUX_XFRM_H
+#define _LINUX_XFRM_H
+
+#include <linux/types.h>
+
+/* All of the structures in this file may not change size as they are
+ * passed into the kernel from userspace via netlink sockets.
+ */
+
+/* Structure to encapsulate addresses. I do not want to use
+ * "standard" structure. My apologies.
+ */
+typedef union {
+	__be32		a4;
+	__be32		a6[4];
+} xfrm_address_t;
+
+/* Ident of a specific xfrm_state. It is used on input to lookup
+ * the state by (spi,daddr,ah/esp) or to store information about
+ * spi, protocol and tunnel address on output.
+ */
+struct xfrm_id {
+	xfrm_address_t	daddr;
+	__be32		spi;
+	__u8		proto;
+};
+
+struct xfrm_sec_ctx {
+	__u8	ctx_doi;
+	__u8	ctx_alg;
+	__u16	ctx_len;
+	__u32	ctx_sid;
+	char	ctx_str[0];
+};
+
+/* Security Context Domains of Interpretation */
+#define XFRM_SC_DOI_RESERVED 0
+#define XFRM_SC_DOI_LSM 1
+
+/* Security Context Algorithms */
+#define XFRM_SC_ALG_RESERVED 0
+#define XFRM_SC_ALG_SELINUX 1
+
+/* Selector, used as selector both on policy rules (SPD) and SAs. */
+
+struct xfrm_selector {
+	xfrm_address_t	daddr;
+	xfrm_address_t	saddr;
+	__be16	dport;
+	__be16	dport_mask;
+	__be16	sport;
+	__be16	sport_mask;
+	__u16	family;
+	__u8	prefixlen_d;
+	__u8	prefixlen_s;
+	__u8	proto;
+	int	ifindex;
+	__kernel_uid32_t	user;
+};
+
+#define XFRM_INF (~(__u64)0)
+
+struct xfrm_lifetime_cfg {
+	__u64	soft_byte_limit;
+	__u64	hard_byte_limit;
+	__u64	soft_packet_limit;
+	__u64	hard_packet_limit;
+	__u64	soft_add_expires_seconds;
+	__u64	hard_add_expires_seconds;
+	__u64	soft_use_expires_seconds;
+	__u64	hard_use_expires_seconds;
+};
+
+struct xfrm_lifetime_cur {
+	__u64	bytes;
+	__u64	packets;
+	__u64	add_time;
+	__u64	use_time;
+};
+
+struct xfrm_replay_state {
+	__u32	oseq;
+	__u32	seq;
+	__u32	bitmap;
+};
+
+struct xfrm_replay_state_esn {
+	unsigned int	bmp_len;
+	__u32		oseq;
+	__u32		seq;
+	__u32		oseq_hi;
+	__u32		seq_hi;
+	__u32		replay_window;
+	__u32		bmp[0];
+};
+
+struct xfrm_algo {
+	char		alg_name[64];
+	unsigned int	alg_key_len;    /* in bits */
+	char		alg_key[0];
+};
+
+struct xfrm_algo_auth {
+	char		alg_name[64];
+	unsigned int	alg_key_len;    /* in bits */
+	unsigned int	alg_trunc_len;  /* in bits */
+	char		alg_key[0];
+};
+
+struct xfrm_algo_aead {
+	char		alg_name[64];
+	unsigned int	alg_key_len;	/* in bits */
+	unsigned int	alg_icv_len;	/* in bits */
+	char		alg_key[0];
+};
+
+struct xfrm_stats {
+	__u32	replay_window;
+	__u32	replay;
+	__u32	integrity_failed;
+};
+
+enum {
+	XFRM_POLICY_TYPE_MAIN	= 0,
+	XFRM_POLICY_TYPE_SUB	= 1,
+	XFRM_POLICY_TYPE_MAX	= 2,
+	XFRM_POLICY_TYPE_ANY	= 255
+};
+
+enum {
+	XFRM_POLICY_IN	= 0,
+	XFRM_POLICY_OUT	= 1,
+	XFRM_POLICY_FWD	= 2,
+	XFRM_POLICY_MASK = 3,
+	XFRM_POLICY_MAX	= 3
+};
+
+enum {
+	XFRM_SHARE_ANY,		/* No limitations */
+	XFRM_SHARE_SESSION,	/* For this session only */
+	XFRM_SHARE_USER,	/* For this user only */
+	XFRM_SHARE_UNIQUE	/* Use once */
+};
+
+#define XFRM_MODE_TRANSPORT 0
+#define XFRM_MODE_TUNNEL 1
+#define XFRM_MODE_ROUTEOPTIMIZATION 2
+#define XFRM_MODE_IN_TRIGGER 3
+#define XFRM_MODE_BEET 4
+#define XFRM_MODE_MAX 5
+
+/* Netlink configuration messages.  */
+enum {
+	XFRM_MSG_BASE = 0x10,
+
+	XFRM_MSG_NEWSA = 0x10,
+#define XFRM_MSG_NEWSA XFRM_MSG_NEWSA
+	XFRM_MSG_DELSA,
+#define XFRM_MSG_DELSA XFRM_MSG_DELSA
+	XFRM_MSG_GETSA,
+#define XFRM_MSG_GETSA XFRM_MSG_GETSA
+
+	XFRM_MSG_NEWPOLICY,
+#define XFRM_MSG_NEWPOLICY XFRM_MSG_NEWPOLICY
+	XFRM_MSG_DELPOLICY,
+#define XFRM_MSG_DELPOLICY XFRM_MSG_DELPOLICY
+	XFRM_MSG_GETPOLICY,
+#define XFRM_MSG_GETPOLICY XFRM_MSG_GETPOLICY
+
+	XFRM_MSG_ALLOCSPI,
+#define XFRM_MSG_ALLOCSPI XFRM_MSG_ALLOCSPI
+	XFRM_MSG_ACQUIRE,
+#define XFRM_MSG_ACQUIRE XFRM_MSG_ACQUIRE
+	XFRM_MSG_EXPIRE,
+#define XFRM_MSG_EXPIRE XFRM_MSG_EXPIRE
+
+	XFRM_MSG_UPDPOLICY,
+#define XFRM_MSG_UPDPOLICY XFRM_MSG_UPDPOLICY
+	XFRM_MSG_UPDSA,
+#define XFRM_MSG_UPDSA XFRM_MSG_UPDSA
+
+	XFRM_MSG_POLEXPIRE,
+#define XFRM_MSG_POLEXPIRE XFRM_MSG_POLEXPIRE
+
+	XFRM_MSG_FLUSHSA,
+#define XFRM_MSG_FLUSHSA XFRM_MSG_FLUSHSA
+	XFRM_MSG_FLUSHPOLICY,
+#define XFRM_MSG_FLUSHPOLICY XFRM_MSG_FLUSHPOLICY
+
+	XFRM_MSG_NEWAE,
+#define XFRM_MSG_NEWAE XFRM_MSG_NEWAE
+	XFRM_MSG_GETAE,
+#define XFRM_MSG_GETAE XFRM_MSG_GETAE
+
+	XFRM_MSG_REPORT,
+#define XFRM_MSG_REPORT XFRM_MSG_REPORT
+
+	XFRM_MSG_MIGRATE,
+#define XFRM_MSG_MIGRATE XFRM_MSG_MIGRATE
+
+	XFRM_MSG_NEWSADINFO,
+#define XFRM_MSG_NEWSADINFO XFRM_MSG_NEWSADINFO
+	XFRM_MSG_GETSADINFO,
+#define XFRM_MSG_GETSADINFO XFRM_MSG_GETSADINFO
+
+	XFRM_MSG_NEWSPDINFO,
+#define XFRM_MSG_NEWSPDINFO XFRM_MSG_NEWSPDINFO
+	XFRM_MSG_GETSPDINFO,
+#define XFRM_MSG_GETSPDINFO XFRM_MSG_GETSPDINFO
+
+	XFRM_MSG_MAPPING,
+#define XFRM_MSG_MAPPING XFRM_MSG_MAPPING
+	__XFRM_MSG_MAX
+};
+#define XFRM_MSG_MAX (__XFRM_MSG_MAX - 1)
+
+#define XFRM_NR_MSGTYPES (XFRM_MSG_MAX + 1 - XFRM_MSG_BASE)
+
+/*
+ * Generic LSM security context for comunicating to user space
+ * NOTE: Same format as sadb_x_sec_ctx
+ */
+struct xfrm_user_sec_ctx {
+	__u16			len;
+	__u16			exttype;
+	__u8			ctx_alg;  /* LSMs: e.g., selinux == 1 */
+	__u8			ctx_doi;
+	__u16			ctx_len;
+};
+
+struct xfrm_user_tmpl {
+	struct xfrm_id		id;
+	__u16			family;
+	xfrm_address_t		saddr;
+	__u32			reqid;
+	__u8			mode;
+	__u8			share;
+	__u8			optional;
+	__u32			aalgos;
+	__u32			ealgos;
+	__u32			calgos;
+};
+
+struct xfrm_encap_tmpl {
+	__u16		encap_type;
+	__be16		encap_sport;
+	__be16		encap_dport;
+	xfrm_address_t	encap_oa;
+};
+
+/* AEVENT flags  */
+enum xfrm_ae_ftype_t {
+	XFRM_AE_UNSPEC,
+	XFRM_AE_RTHR=1,	/* replay threshold*/
+	XFRM_AE_RVAL=2, /* replay value */
+	XFRM_AE_LVAL=4, /* lifetime value */
+	XFRM_AE_ETHR=8, /* expiry timer threshold */
+	XFRM_AE_CR=16, /* Event cause is replay update */
+	XFRM_AE_CE=32, /* Event cause is timer expiry */
+	XFRM_AE_CU=64, /* Event cause is policy update */
+	__XFRM_AE_MAX
+
+#define XFRM_AE_MAX (__XFRM_AE_MAX - 1)
+};
+
+struct xfrm_userpolicy_type {
+	__u8		type;
+	__u16		reserved1;
+	__u8		reserved2;
+};
+
+/* Netlink message attributes.  */
+enum xfrm_attr_type_t {
+	XFRMA_UNSPEC,
+	XFRMA_ALG_AUTH,		/* struct xfrm_algo */
+	XFRMA_ALG_CRYPT,	/* struct xfrm_algo */
+	XFRMA_ALG_COMP,		/* struct xfrm_algo */
+	XFRMA_ENCAP,		/* struct xfrm_algo + struct xfrm_encap_tmpl */
+	XFRMA_TMPL,		/* 1 or more struct xfrm_user_tmpl */
+	XFRMA_SA,		/* struct xfrm_usersa_info  */
+	XFRMA_POLICY,		/*struct xfrm_userpolicy_info */
+	XFRMA_SEC_CTX,		/* struct xfrm_sec_ctx */
+	XFRMA_LTIME_VAL,
+	XFRMA_REPLAY_VAL,
+	XFRMA_REPLAY_THRESH,
+	XFRMA_ETIMER_THRESH,
+	XFRMA_SRCADDR,		/* xfrm_address_t */
+	XFRMA_COADDR,		/* xfrm_address_t */
+	XFRMA_LASTUSED,		/* unsigned long  */
+	XFRMA_POLICY_TYPE,	/* struct xfrm_userpolicy_type */
+	XFRMA_MIGRATE,
+	XFRMA_ALG_AEAD,		/* struct xfrm_algo_aead */
+	XFRMA_KMADDRESS,        /* struct xfrm_user_kmaddress */
+	XFRMA_ALG_AUTH_TRUNC,	/* struct xfrm_algo_auth */
+	XFRMA_MARK,		/* struct xfrm_mark */
+	XFRMA_TFCPAD,		/* __u32 */
+	XFRMA_REPLAY_ESN_VAL,	/* struct xfrm_replay_esn */
+	__XFRMA_MAX
+
+#define XFRMA_MAX (__XFRMA_MAX - 1)
+};
+
+struct xfrm_mark {
+	__u32           v; /* value */
+	__u32           m; /* mask */
+};
+
+enum xfrm_sadattr_type_t {
+	XFRMA_SAD_UNSPEC,
+	XFRMA_SAD_CNT,
+	XFRMA_SAD_HINFO,
+	__XFRMA_SAD_MAX
+
+#define XFRMA_SAD_MAX (__XFRMA_SAD_MAX - 1)
+};
+
+struct xfrmu_sadhinfo {
+	__u32 sadhcnt; /* current hash bkts */
+	__u32 sadhmcnt; /* max allowed hash bkts */
+};
+
+enum xfrm_spdattr_type_t {
+	XFRMA_SPD_UNSPEC,
+	XFRMA_SPD_INFO,
+	XFRMA_SPD_HINFO,
+	__XFRMA_SPD_MAX
+
+#define XFRMA_SPD_MAX (__XFRMA_SPD_MAX - 1)
+};
+
+struct xfrmu_spdinfo {
+	__u32 incnt;
+	__u32 outcnt;
+	__u32 fwdcnt;
+	__u32 inscnt;
+	__u32 outscnt;
+	__u32 fwdscnt;
+};
+
+struct xfrmu_spdhinfo {
+	__u32 spdhcnt;
+	__u32 spdhmcnt;
+};
+
+struct xfrm_usersa_info {
+	struct xfrm_selector		sel;
+	struct xfrm_id			id;
+	xfrm_address_t			saddr;
+	struct xfrm_lifetime_cfg	lft;
+	struct xfrm_lifetime_cur	curlft;
+	struct xfrm_stats		stats;
+	__u32				seq;
+	__u32				reqid;
+	__u16				family;
+	__u8				mode;		/* XFRM_MODE_xxx */
+	__u8				replay_window;
+	__u8				flags;
+#define XFRM_STATE_NOECN	1
+#define XFRM_STATE_DECAP_DSCP	2
+#define XFRM_STATE_NOPMTUDISC	4
+#define XFRM_STATE_WILDRECV	8
+#define XFRM_STATE_ICMP		16
+#define XFRM_STATE_AF_UNSPEC	32
+#define XFRM_STATE_ALIGN4	64
+#define XFRM_STATE_ESN		128
+};
+
+struct xfrm_usersa_id {
+	xfrm_address_t			daddr;
+	__be32				spi;
+	__u16				family;
+	__u8				proto;
+};
+
+struct xfrm_aevent_id {
+	struct xfrm_usersa_id		sa_id;
+	xfrm_address_t			saddr;
+	__u32				flags;
+	__u32				reqid;
+};
+
+struct xfrm_userspi_info {
+	struct xfrm_usersa_info		info;
+	__u32				min;
+	__u32				max;
+};
+
+struct xfrm_userpolicy_info {
+	struct xfrm_selector		sel;
+	struct xfrm_lifetime_cfg	lft;
+	struct xfrm_lifetime_cur	curlft;
+	__u32				priority;
+	__u32				index;
+	__u8				dir;
+	__u8				action;
+#define XFRM_POLICY_ALLOW	0
+#define XFRM_POLICY_BLOCK	1
+	__u8				flags;
+#define XFRM_POLICY_LOCALOK	1	/* Allow user to override global policy */
+	/* Automatically expand selector to include matching ICMP payloads. */
+#define XFRM_POLICY_ICMP	2
+	__u8				share;
+};
+
+struct xfrm_userpolicy_id {
+	struct xfrm_selector		sel;
+	__u32				index;
+	__u8				dir;
+};
+
+struct xfrm_user_acquire {
+	struct xfrm_id			id;
+	xfrm_address_t			saddr;
+	struct xfrm_selector		sel;
+	struct xfrm_userpolicy_info	policy;
+	__u32				aalgos;
+	__u32				ealgos;
+	__u32				calgos;
+	__u32				seq;
+};
+
+struct xfrm_user_expire {
+	struct xfrm_usersa_info		state;
+	__u8				hard;
+};
+
+struct xfrm_user_polexpire {
+	struct xfrm_userpolicy_info	pol;
+	__u8				hard;
+};
+
+struct xfrm_usersa_flush {
+	__u8				proto;
+};
+
+struct xfrm_user_report {
+	__u8				proto;
+	struct xfrm_selector		sel;
+};
+
+/* Used by MIGRATE to pass addresses IKE should use to perform
+ * SA negotiation with the peer */
+struct xfrm_user_kmaddress {
+	xfrm_address_t                  local;
+	xfrm_address_t                  remote;
+	__u32				reserved;
+	__u16				family;
+};
+
+struct xfrm_user_migrate {
+	xfrm_address_t			old_daddr;
+	xfrm_address_t			old_saddr;
+	xfrm_address_t			new_daddr;
+	xfrm_address_t			new_saddr;
+	__u8				proto;
+	__u8				mode;
+	__u16				reserved;
+	__u32				reqid;
+	__u16				old_family;
+	__u16				new_family;
+};
+
+struct xfrm_user_mapping {
+	struct xfrm_usersa_id		id;
+	__u32				reqid;
+	xfrm_address_t			old_saddr;
+	xfrm_address_t			new_saddr;
+	__be16				old_sport;
+	__be16				new_sport;
+};
+
+#ifndef __KERNEL__
+/* backwards compatibility for userspace */
+#define XFRMGRP_ACQUIRE		1
+#define XFRMGRP_EXPIRE		2
+#define XFRMGRP_SA		4
+#define XFRMGRP_POLICY		8
+#define XFRMGRP_REPORT		0x20
+#endif
+
+enum xfrm_nlgroups {
+	XFRMNLGRP_NONE,
+#define XFRMNLGRP_NONE		XFRMNLGRP_NONE
+	XFRMNLGRP_ACQUIRE,
+#define XFRMNLGRP_ACQUIRE	XFRMNLGRP_ACQUIRE
+	XFRMNLGRP_EXPIRE,
+#define XFRMNLGRP_EXPIRE	XFRMNLGRP_EXPIRE
+	XFRMNLGRP_SA,
+#define XFRMNLGRP_SA		XFRMNLGRP_SA
+	XFRMNLGRP_POLICY,
+#define XFRMNLGRP_POLICY	XFRMNLGRP_POLICY
+	XFRMNLGRP_AEVENTS,
+#define XFRMNLGRP_AEVENTS	XFRMNLGRP_AEVENTS
+	XFRMNLGRP_REPORT,
+#define XFRMNLGRP_REPORT	XFRMNLGRP_REPORT
+	XFRMNLGRP_MIGRATE,
+#define XFRMNLGRP_MIGRATE	XFRMNLGRP_MIGRATE
+	XFRMNLGRP_MAPPING,
+#define XFRMNLGRP_MAPPING	XFRMNLGRP_MAPPING
+	__XFRMNLGRP_MAX
+};
+#define XFRMNLGRP_MAX	(__XFRMNLGRP_MAX - 1)
+
+#endif /* _LINUX_XFRM_H */
diff --git a/include/linux/xilinxfb.h b/include/linux/xilinxfb.h
new file mode 100644
index 00000000..5a155a96
--- /dev/null
+++ b/include/linux/xilinxfb.h
@@ -0,0 +1,30 @@
+/*
+ * Platform device data for Xilinx Framebuffer device
+ *
+ * Copyright 2007 Secret Lab Technologies Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __XILINXFB_H__
+#define __XILINXFB_H__
+
+#include <linux/types.h>
+
+/* ML300/403 reference design framebuffer driver platform data struct */
+struct xilinxfb_platform_data {
+	u32 rotate_screen;	/* Flag to rotate display 180 degrees */
+	u32 screen_height_mm;	/* Physical dimensions of screen in mm */
+	u32 screen_width_mm;
+	u32 xres, yres;		/* resolution of screen in pixels */
+	u32 xvirt, yvirt;	/* resolution of memory buffer */
+
+	/* Physical address of framebuffer memory; If non-zero, driver
+	 * will use provided memory address instead of allocating one from
+	 * the consistent pool. */
+	u32 fb_phys;
+};
+
+#endif  /* __XILINXFB_H__ */
diff --git a/include/linux/xz.h b/include/linux/xz.h
new file mode 100644
index 00000000..64cffa6d
--- /dev/null
+++ b/include/linux/xz.h
@@ -0,0 +1,264 @@
+/*
+ * XZ decompressor
+ *
+ * Authors: Lasse Collin <lasse.collin@tukaani.org>
+ *          Igor Pavlov <http://7-zip.org/>
+ *
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
+ */
+
+#ifndef XZ_H
+#define XZ_H
+
+#ifdef __KERNEL__
+#	include <linux/stddef.h>
+#	include <linux/types.h>
+#else
+#	include <stddef.h>
+#	include <stdint.h>
+#endif
+
+/* In Linux, this is used to make extern functions static when needed. */
+#ifndef XZ_EXTERN
+#	define XZ_EXTERN extern
+#endif
+
+/**
+ * enum xz_mode - Operation mode
+ *
+ * @XZ_SINGLE:              Single-call mode. This uses less RAM than
+ *                          than multi-call modes, because the LZMA2
+ *                          dictionary doesn't need to be allocated as
+ *                          part of the decoder state. All required data
+ *                          structures are allocated at initialization,
+ *                          so xz_dec_run() cannot return XZ_MEM_ERROR.
+ * @XZ_PREALLOC:            Multi-call mode with preallocated LZMA2
+ *                          dictionary buffer. All data structures are
+ *                          allocated at initialization, so xz_dec_run()
+ *                          cannot return XZ_MEM_ERROR.
+ * @XZ_DYNALLOC:            Multi-call mode. The LZMA2 dictionary is
+ *                          allocated once the required size has been
+ *                          parsed from the stream headers. If the
+ *                          allocation fails, xz_dec_run() will return
+ *                          XZ_MEM_ERROR.
+ *
+ * It is possible to enable support only for a subset of the above
+ * modes at compile time by defining XZ_DEC_SINGLE, XZ_DEC_PREALLOC,
+ * or XZ_DEC_DYNALLOC. The xz_dec kernel module is always compiled
+ * with support for all operation modes, but the preboot code may
+ * be built with fewer features to minimize code size.
+ */
+enum xz_mode {
+	XZ_SINGLE,
+	XZ_PREALLOC,
+	XZ_DYNALLOC
+};
+
+/**
+ * enum xz_ret - Return codes
+ * @XZ_OK:                  Everything is OK so far. More input or more
+ *                          output space is required to continue. This
+ *                          return code is possible only in multi-call mode
+ *                          (XZ_PREALLOC or XZ_DYNALLOC).
+ * @XZ_STREAM_END:          Operation finished successfully.
+ * @XZ_UNSUPPORTED_CHECK:   Integrity check type is not supported. Decoding
+ *                          is still possible in multi-call mode by simply
+ *                          calling xz_dec_run() again.
+ *                          Note that this return value is used only if
+ *                          XZ_DEC_ANY_CHECK was defined at build time,
+ *                          which is not used in the kernel. Unsupported
+ *                          check types return XZ_OPTIONS_ERROR if
+ *                          XZ_DEC_ANY_CHECK was not defined at build time.
+ * @XZ_MEM_ERROR:           Allocating memory failed. This return code is
+ *                          possible only if the decoder was initialized
+ *                          with XZ_DYNALLOC. The amount of memory that was
+ *                          tried to be allocated was no more than the
+ *                          dict_max argument given to xz_dec_init().
+ * @XZ_MEMLIMIT_ERROR:      A bigger LZMA2 dictionary would be needed than
+ *                          allowed by the dict_max argument given to
+ *                          xz_dec_init(). This return value is possible
+ *                          only in multi-call mode (XZ_PREALLOC or
+ *                          XZ_DYNALLOC); the single-call mode (XZ_SINGLE)
+ *                          ignores the dict_max argument.
+ * @XZ_FORMAT_ERROR:        File format was not recognized (wrong magic
+ *                          bytes).
+ * @XZ_OPTIONS_ERROR:       This implementation doesn't support the requested
+ *                          compression options. In the decoder this means
+ *                          that the header CRC32 matches, but the header
+ *                          itself specifies something that we don't support.
+ * @XZ_DATA_ERROR:          Compressed data is corrupt.
+ * @XZ_BUF_ERROR:           Cannot make any progress. Details are slightly
+ *                          different between multi-call and single-call
+ *                          mode; more information below.
+ *
+ * In multi-call mode, XZ_BUF_ERROR is returned when two consecutive calls
+ * to XZ code cannot consume any input and cannot produce any new output.
+ * This happens when there is no new input available, or the output buffer
+ * is full while at least one output byte is still pending. Assuming your
+ * code is not buggy, you can get this error only when decoding a compressed
+ * stream that is truncated or otherwise corrupt.
+ *
+ * In single-call mode, XZ_BUF_ERROR is returned only when the output buffer
+ * is too small or the compressed input is corrupt in a way that makes the
+ * decoder produce more output than the caller expected. When it is
+ * (relatively) clear that the compressed input is truncated, XZ_DATA_ERROR
+ * is used instead of XZ_BUF_ERROR.
+ */
+enum xz_ret {
+	XZ_OK,
+	XZ_STREAM_END,
+	XZ_UNSUPPORTED_CHECK,
+	XZ_MEM_ERROR,
+	XZ_MEMLIMIT_ERROR,
+	XZ_FORMAT_ERROR,
+	XZ_OPTIONS_ERROR,
+	XZ_DATA_ERROR,
+	XZ_BUF_ERROR
+};
+
+/**
+ * struct xz_buf - Passing input and output buffers to XZ code
+ * @in:         Beginning of the input buffer. This may be NULL if and only
+ *              if in_pos is equal to in_size.
+ * @in_pos:     Current position in the input buffer. This must not exceed
+ *              in_size.
+ * @in_size:    Size of the input buffer
+ * @out:        Beginning of the output buffer. This may be NULL if and only
+ *              if out_pos is equal to out_size.
+ * @out_pos:    Current position in the output buffer. This must not exceed
+ *              out_size.
+ * @out_size:   Size of the output buffer
+ *
+ * Only the contents of the output buffer from out[out_pos] onward, and
+ * the variables in_pos and out_pos are modified by the XZ code.
+ */
+struct xz_buf {
+	const uint8_t *in;
+	size_t in_pos;
+	size_t in_size;
+
+	uint8_t *out;
+	size_t out_pos;
+	size_t out_size;
+};
+
+/**
+ * struct xz_dec - Opaque type to hold the XZ decoder state
+ */
+struct xz_dec;
+
+/**
+ * xz_dec_init() - Allocate and initialize a XZ decoder state
+ * @mode:       Operation mode
+ * @dict_max:   Maximum size of the LZMA2 dictionary (history buffer) for
+ *              multi-call decoding. This is ignored in single-call mode
+ *              (mode == XZ_SINGLE). LZMA2 dictionary is always 2^n bytes
+ *              or 2^n + 2^(n-1) bytes (the latter sizes are less common
+ *              in practice), so other values for dict_max don't make sense.
+ *              In the kernel, dictionary sizes of 64 KiB, 128 KiB, 256 KiB,
+ *              512 KiB, and 1 MiB are probably the only reasonable values,
+ *              except for kernel and initramfs images where a bigger
+ *              dictionary can be fine and useful.
+ *
+ * Single-call mode (XZ_SINGLE): xz_dec_run() decodes the whole stream at
+ * once. The caller must provide enough output space or the decoding will
+ * fail. The output space is used as the dictionary buffer, which is why
+ * there is no need to allocate the dictionary as part of the decoder's
+ * internal state.
+ *
+ * Because the output buffer is used as the workspace, streams encoded using
+ * a big dictionary are not a problem in single-call mode. It is enough that
+ * the output buffer is big enough to hold the actual uncompressed data; it
+ * can be smaller than the dictionary size stored in the stream headers.
+ *
+ * Multi-call mode with preallocated dictionary (XZ_PREALLOC): dict_max bytes
+ * of memory is preallocated for the LZMA2 dictionary. This way there is no
+ * risk that xz_dec_run() could run out of memory, since xz_dec_run() will
+ * never allocate any memory. Instead, if the preallocated dictionary is too
+ * small for decoding the given input stream, xz_dec_run() will return
+ * XZ_MEMLIMIT_ERROR. Thus, it is important to know what kind of data will be
+ * decoded to avoid allocating excessive amount of memory for the dictionary.
+ *
+ * Multi-call mode with dynamically allocated dictionary (XZ_DYNALLOC):
+ * dict_max specifies the maximum allowed dictionary size that xz_dec_run()
+ * may allocate once it has parsed the dictionary size from the stream
+ * headers. This way excessive allocations can be avoided while still
+ * limiting the maximum memory usage to a sane value to prevent running the
+ * system out of memory when decompressing streams from untrusted sources.
+ *
+ * On success, xz_dec_init() returns a pointer to struct xz_dec, which is
+ * ready to be used with xz_dec_run(). If memory allocation fails,
+ * xz_dec_init() returns NULL.
+ */
+XZ_EXTERN struct xz_dec *xz_dec_init(enum xz_mode mode, uint32_t dict_max);
+
+/**
+ * xz_dec_run() - Run the XZ decoder
+ * @s:          Decoder state allocated using xz_dec_init()
+ * @b:          Input and output buffers
+ *
+ * The possible return values depend on build options and operation mode.
+ * See enum xz_ret for details.
+ *
+ * Note that if an error occurs in single-call mode (return value is not
+ * XZ_STREAM_END), b->in_pos and b->out_pos are not modified and the
+ * contents of the output buffer from b->out[b->out_pos] onward are
+ * undefined. This is true even after XZ_BUF_ERROR, because with some filter
+ * chains, there may be a second pass over the output buffer, and this pass
+ * cannot be properly done if the output buffer is truncated. Thus, you
+ * cannot give the single-call decoder a too small buffer and then expect to
+ * get that amount valid data from the beginning of the stream. You must use
+ * the multi-call decoder if you don't want to uncompress the whole stream.
+ */
+XZ_EXTERN enum xz_ret xz_dec_run(struct xz_dec *s, struct xz_buf *b);
+
+/**
+ * xz_dec_reset() - Reset an already allocated decoder state
+ * @s:          Decoder state allocated using xz_dec_init()
+ *
+ * This function can be used to reset the multi-call decoder state without
+ * freeing and reallocating memory with xz_dec_end() and xz_dec_init().
+ *
+ * In single-call mode, xz_dec_reset() is always called in the beginning of
+ * xz_dec_run(). Thus, explicit call to xz_dec_reset() is useful only in
+ * multi-call mode.
+ */
+XZ_EXTERN void xz_dec_reset(struct xz_dec *s);
+
+/**
+ * xz_dec_end() - Free the memory allocated for the decoder state
+ * @s:          Decoder state allocated using xz_dec_init(). If s is NULL,
+ *              this function does nothing.
+ */
+XZ_EXTERN void xz_dec_end(struct xz_dec *s);
+
+/*
+ * Standalone build (userspace build or in-kernel build for boot time use)
+ * needs a CRC32 implementation. For normal in-kernel use, kernel's own
+ * CRC32 module is used instead, and users of this module don't need to
+ * care about the functions below.
+ */
+#ifndef XZ_INTERNAL_CRC32
+#	ifdef __KERNEL__
+#		define XZ_INTERNAL_CRC32 0
+#	else
+#		define XZ_INTERNAL_CRC32 1
+#	endif
+#endif
+
+#if XZ_INTERNAL_CRC32
+/*
+ * This must be called before any other xz_* function to initialize
+ * the CRC32 lookup table.
+ */
+XZ_EXTERN void xz_crc32_init(void);
+
+/*
+ * Update CRC32 value using the polynomial from IEEE-802.3. To start a new
+ * calculation, the third argument must be zero. To continue the calculation,
+ * the previously returned value is passed as the third argument.
+ */
+XZ_EXTERN uint32_t xz_crc32(const uint8_t *buf, size_t size, uint32_t crc);
+#endif
+#endif
diff --git a/include/linux/yam.h b/include/linux/yam.h
new file mode 100644
index 00000000..7fe28228
--- /dev/null
+++ b/include/linux/yam.h
@@ -0,0 +1,82 @@
+/*****************************************************************************/
+
+/*
+ *	yam.h  -- YAM radio modem driver.
+ *
+ *	Copyright (C) 1998 Frederic Rible F1OAT (frible@teaser.fr)
+ *	Adapted from baycom.c driver written by Thomas Sailer (sailer@ife.ee.ethz.ch)
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License
+ *	along with this program; if not, write to the Free Software
+ *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  Please note that the GPL allows you to use the driver, NOT the radio.
+ *  In order to use the radio, you need a license from the communications
+ *  authority of your country.
+ *
+ *
+ */
+
+/*****************************************************************************/
+
+#define SIOCYAMRESERVED	(0)
+#define SIOCYAMSCFG 	(1)	/* Set configuration */
+#define SIOCYAMGCFG 	(2)	/* Get configuration */
+#define SIOCYAMSMCS 	(3)	/* Set mcs data */
+
+#define YAM_IOBASE   (1 << 0)
+#define YAM_IRQ      (1 << 1)
+#define YAM_BITRATE  (1 << 2) /* Bit rate of radio port ->57600 */
+#define YAM_MODE     (1 << 3) /* 0=simplex 1=duplex 2=duplex+tempo */
+#define YAM_HOLDDLY  (1 << 4) /* duplex tempo (sec) */
+#define YAM_TXDELAY  (1 << 5) /* Tx Delay (ms) */
+#define YAM_TXTAIL   (1 << 6) /* Tx Tail  (ms) */
+#define YAM_PERSIST  (1 << 7) /* Persist  (ms) */
+#define YAM_SLOTTIME (1 << 8) /* Slottime (ms) */
+#define YAM_BAUDRATE (1 << 9) /* Baud rate of rs232 port ->115200 */
+
+#define YAM_MAXBITRATE  57600
+#define YAM_MAXBAUDRATE 115200
+#define YAM_MAXMODE     2
+#define YAM_MAXHOLDDLY  99
+#define YAM_MAXTXDELAY  999
+#define YAM_MAXTXTAIL   999
+#define YAM_MAXPERSIST  255
+#define YAM_MAXSLOTTIME 999
+
+#define YAM_FPGA_SIZE	5302
+
+struct yamcfg {
+	unsigned int mask;		/* Mask of commands */
+	unsigned int iobase;	/* IO Base of COM port */
+	unsigned int irq;		/* IRQ of COM port */
+	unsigned int bitrate;	/* Bit rate of radio port */
+	unsigned int baudrate;	/* Baud rate of the RS232 port */
+	unsigned int txdelay;	/* TxDelay */
+	unsigned int txtail;	/* TxTail */
+	unsigned int persist;	/* Persistence */
+	unsigned int slottime;	/* Slottime */
+	unsigned int mode;		/* mode 0 (simp), 1(Dupl), 2(Dupl+delay) */
+	unsigned int holddly;	/* PTT delay in FullDuplex 2 mode */
+};
+
+struct yamdrv_ioctl_cfg {
+	int cmd;
+	struct yamcfg cfg;
+};
+
+struct yamdrv_ioctl_mcs {
+	int cmd;
+	int bitrate;
+	unsigned char bits[YAM_FPGA_SIZE];
+};
diff --git a/include/linux/z2_battery.h b/include/linux/z2_battery.h
new file mode 100644
index 00000000..7b975040
--- /dev/null
+++ b/include/linux/z2_battery.h
@@ -0,0 +1,17 @@
+#ifndef _LINUX_Z2_BATTERY_H
+#define _LINUX_Z2_BATTERY_H
+
+struct z2_battery_info {
+	int	 batt_I2C_bus;
+	int	 batt_I2C_addr;
+	int	 batt_I2C_reg;
+	int	 charge_gpio;
+	int	 min_voltage;
+	int	 max_voltage;
+	int	 batt_div;
+	int	 batt_mult;
+	int	 batt_tech;
+	char	*batt_name;
+};
+
+#endif
diff --git a/include/linux/zconf.h b/include/linux/zconf.h
new file mode 100644
index 00000000..0beb75e3
--- /dev/null
+++ b/include/linux/zconf.h
@@ -0,0 +1,57 @@
+/* zconf.h -- configuration of the zlib compression library
+ * Copyright (C) 1995-1998 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+/* @(#) $Id$ */
+
+#ifndef _ZCONF_H
+#define _ZCONF_H
+
+/* The memory requirements for deflate are (in bytes):
+            (1 << (windowBits+2)) +  (1 << (memLevel+9))
+ that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
+ plus a few kilobytes for small objects. For example, if you want to reduce
+ the default memory requirements from 256K to 128K, compile with
+     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ Of course this will generally degrade compression (there's no free lunch).
+
+   The memory requirements for inflate are (in bytes) 1 << windowBits
+ that is, 32K for windowBits=15 (default value) plus a few kilobytes
+ for small objects.
+*/
+
+/* Maximum value for memLevel in deflateInit2 */
+#ifndef MAX_MEM_LEVEL
+#  define MAX_MEM_LEVEL 8
+#endif
+
+/* Maximum value for windowBits in deflateInit2 and inflateInit2.
+ * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
+ * created by gzip. (Files created by minigzip can still be extracted by
+ * gzip.)
+ */
+#ifndef MAX_WBITS
+#  define MAX_WBITS   15 /* 32K LZ77 window */
+#endif
+
+/* default windowBits for decompression. MAX_WBITS is for compression only */
+#ifndef DEF_WBITS
+#  define DEF_WBITS MAX_WBITS
+#endif
+
+/* default memLevel */
+#if MAX_MEM_LEVEL >= 8
+#  define DEF_MEM_LEVEL 8
+#else
+#  define DEF_MEM_LEVEL  MAX_MEM_LEVEL
+#endif
+
+                        /* Type declarations */
+
+typedef unsigned char  Byte;  /* 8 bits */
+typedef unsigned int   uInt;  /* 16 bits or more */
+typedef unsigned long  uLong; /* 32 bits or more */
+typedef void     *voidp;
+
+#endif /* _ZCONF_H */
diff --git a/include/linux/zlib.h b/include/linux/zlib.h
new file mode 100644
index 00000000..9c5a6b4d
--- /dev/null
+++ b/include/linux/zlib.h
@@ -0,0 +1,711 @@
+/* zlib.h -- interface of the 'zlib' general purpose compression library
+
+  Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+  Jean-loup Gailly        Mark Adler
+  jloup@gzip.org          madler@alumni.caltech.edu
+
+
+  The data format used by the zlib library is described by RFCs (Request for
+  Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt
+  (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
+*/
+
+#ifndef _ZLIB_H
+#define _ZLIB_H
+
+#include <linux/zconf.h>
+
+/* zlib deflate based on ZLIB_VERSION "1.1.3" */
+/* zlib inflate based on ZLIB_VERSION "1.2.3" */
+
+/*
+  This is a modified version of zlib for use inside the Linux kernel.
+  The main changes are to perform all memory allocation in advance.
+
+  Inflation Changes:
+    * Z_PACKET_FLUSH is added and used by ppp_deflate. Before returning
+      this checks there is no more input data available and the next data
+      is a STORED block. It also resets the mode to be read for the next
+      data, all as per PPP requirements.
+    * Addition of zlib_inflateIncomp which copies incompressible data into
+      the history window and adjusts the accoutning without calling
+      zlib_inflate itself to inflate the data.
+*/
+
+/* 
+     The 'zlib' compression library provides in-memory compression and
+  decompression functions, including integrity checks of the uncompressed
+  data.  This version of the library supports only one compression method
+  (deflation) but other algorithms will be added later and will have the same
+  stream interface.
+
+     Compression can be done in a single step if the buffers are large
+  enough (for example if an input file is mmap'ed), or can be done by
+  repeated calls of the compression function.  In the latter case, the
+  application must provide more input and/or consume the output
+  (providing more output space) before each call.
+
+     The compressed data format used by default by the in-memory functions is
+  the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped
+  around a deflate stream, which is itself documented in RFC 1951.
+
+     The library also supports reading and writing files in gzip (.gz) format
+  with an interface similar to that of stdio.
+
+     The zlib format was designed to be compact and fast for use in memory
+  and on communications channels.  The gzip format was designed for single-
+  file compression on file systems, has a larger header than zlib to maintain
+  directory information, and uses a different, slower check method than zlib.
+
+     The library does not install any signal handler. The decoder checks
+  the consistency of the compressed data, so the library should never
+  crash even in case of corrupted input.
+*/
+
+struct internal_state;
+
+typedef struct z_stream_s {
+    const Byte *next_in;   /* next input byte */
+    uInt     avail_in;  /* number of bytes available at next_in */
+    uLong    total_in;  /* total nb of input bytes read so far */
+
+    Byte    *next_out;  /* next output byte should be put there */
+    uInt     avail_out; /* remaining free space at next_out */
+    uLong    total_out; /* total nb of bytes output so far */
+
+    char     *msg;      /* last error message, NULL if no error */
+    struct internal_state *state; /* not visible by applications */
+
+    void     *workspace; /* memory allocated for this stream */
+
+    int     data_type;  /* best guess about the data type: ascii or binary */
+    uLong   adler;      /* adler32 value of the uncompressed data */
+    uLong   reserved;   /* reserved for future use */
+} z_stream;
+
+typedef z_stream *z_streamp;
+
+/*
+   The application must update next_in and avail_in when avail_in has
+   dropped to zero. It must update next_out and avail_out when avail_out
+   has dropped to zero. The application must initialize zalloc, zfree and
+   opaque before calling the init function. All other fields are set by the
+   compression library and must not be updated by the application.
+
+   The opaque value provided by the application will be passed as the first
+   parameter for calls of zalloc and zfree. This can be useful for custom
+   memory management. The compression library attaches no meaning to the
+   opaque value.
+
+   zalloc must return NULL if there is not enough memory for the object.
+   If zlib is used in a multi-threaded application, zalloc and zfree must be
+   thread safe.
+
+   On 16-bit systems, the functions zalloc and zfree must be able to allocate
+   exactly 65536 bytes, but will not be required to allocate more than this
+   if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
+   pointers returned by zalloc for objects of exactly 65536 bytes *must*
+   have their offset normalized to zero. The default allocation function
+   provided by this library ensures this (see zutil.c). To reduce memory
+   requirements and avoid any allocation of 64K objects, at the expense of
+   compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
+
+   The fields total_in and total_out can be used for statistics or
+   progress reports. After compression, total_in holds the total size of
+   the uncompressed data and may be saved for use in the decompressor
+   (particularly if the decompressor wants to decompress everything in
+   a single step).
+*/
+
+                        /* constants */
+
+#define Z_NO_FLUSH      0
+#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */
+#define Z_PACKET_FLUSH  2
+#define Z_SYNC_FLUSH    3
+#define Z_FULL_FLUSH    4
+#define Z_FINISH        5
+#define Z_BLOCK         6 /* Only for inflate at present */
+/* Allowed flush values; see deflate() and inflate() below for details */
+
+#define Z_OK            0
+#define Z_STREAM_END    1
+#define Z_NEED_DICT     2
+#define Z_ERRNO        (-1)
+#define Z_STREAM_ERROR (-2)
+#define Z_DATA_ERROR   (-3)
+#define Z_MEM_ERROR    (-4)
+#define Z_BUF_ERROR    (-5)
+#define Z_VERSION_ERROR (-6)
+/* Return codes for the compression/decompression functions. Negative
+ * values are errors, positive values are used for special but normal events.
+ */
+
+#define Z_NO_COMPRESSION         0
+#define Z_BEST_SPEED             1
+#define Z_BEST_COMPRESSION       9
+#define Z_DEFAULT_COMPRESSION  (-1)
+/* compression levels */
+
+#define Z_FILTERED            1
+#define Z_HUFFMAN_ONLY        2
+#define Z_DEFAULT_STRATEGY    0
+/* compression strategy; see deflateInit2() below for details */
+
+#define Z_BINARY   0
+#define Z_ASCII    1
+#define Z_UNKNOWN  2
+/* Possible values of the data_type field */
+
+#define Z_DEFLATED   8
+/* The deflate compression method (the only one supported in this version) */
+
+                        /* basic functions */
+
+extern int zlib_deflate_workspacesize (int windowBits, int memLevel);
+/*
+   Returns the number of bytes that needs to be allocated for a per-
+   stream workspace with the specified parameters.  A pointer to this
+   number of bytes should be returned in stream->workspace before
+   you call zlib_deflateInit() or zlib_deflateInit2().  If you call
+   zlib_deflateInit(), specify windowBits = MAX_WBITS and memLevel =
+   MAX_MEM_LEVEL here.  If you call zlib_deflateInit2(), the windowBits
+   and memLevel parameters passed to zlib_deflateInit2() must not
+   exceed those passed here.
+*/
+
+/* 
+extern int deflateInit (z_streamp strm, int level);
+
+     Initializes the internal stream state for compression. The fields
+   zalloc, zfree and opaque must be initialized before by the caller.
+   If zalloc and zfree are set to NULL, deflateInit updates them to
+   use default allocation functions.
+
+     The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
+   1 gives best speed, 9 gives best compression, 0 gives no compression at
+   all (the input data is simply copied a block at a time).
+   Z_DEFAULT_COMPRESSION requests a default compromise between speed and
+   compression (currently equivalent to level 6).
+
+     deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_STREAM_ERROR if level is not a valid compression level,
+   Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
+   with the version assumed by the caller (ZLIB_VERSION).
+   msg is set to null if there is no error message.  deflateInit does not
+   perform any compression: this will be done by deflate().
+*/
+
+
+extern int zlib_deflate (z_streamp strm, int flush);
+/*
+    deflate compresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full. It may introduce some
+  output latency (reading input without producing any output) except when
+  forced to flush.
+
+    The detailed semantics are as follows. deflate performs one or both of the
+  following actions:
+
+  - Compress more input starting at next_in and update next_in and avail_in
+    accordingly. If not all input can be processed (because there is not
+    enough room in the output buffer), next_in and avail_in are updated and
+    processing will resume at this point for the next call of deflate().
+
+  - Provide more output starting at next_out and update next_out and avail_out
+    accordingly. This action is forced if the parameter flush is non zero.
+    Forcing flush frequently degrades the compression ratio, so this parameter
+    should be set only when necessary (in interactive applications).
+    Some output may be provided even if flush is not set.
+
+  Before the call of deflate(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming
+  more output, and updating avail_in or avail_out accordingly; avail_out
+  should never be zero before the call. The application can consume the
+  compressed output when it wants, for example when the output buffer is full
+  (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK
+  and with zero avail_out, it must be called again after making room in the
+  output buffer because there might be more output pending.
+
+    If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
+  flushed to the output buffer and the output is aligned on a byte boundary, so
+  that the decompressor can get all input data available so far. (In particular
+  avail_in is zero after the call if enough output space has been provided
+  before the call.)  Flushing may degrade compression for some compression
+  algorithms and so it should be used only when necessary.
+
+    If flush is set to Z_FULL_FLUSH, all output is flushed as with
+  Z_SYNC_FLUSH, and the compression state is reset so that decompression can
+  restart from this point if previous compressed data has been damaged or if
+  random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
+  the compression.
+
+    If deflate returns with avail_out == 0, this function must be called again
+  with the same value of the flush parameter and more output space (updated
+  avail_out), until the flush is complete (deflate returns with non-zero
+  avail_out).
+
+    If the parameter flush is set to Z_FINISH, pending input is processed,
+  pending output is flushed and deflate returns with Z_STREAM_END if there
+  was enough output space; if deflate returns with Z_OK, this function must be
+  called again with Z_FINISH and more output space (updated avail_out) but no
+  more input data, until it returns with Z_STREAM_END or an error. After
+  deflate has returned Z_STREAM_END, the only possible operations on the
+  stream are deflateReset or deflateEnd.
+  
+    Z_FINISH can be used immediately after deflateInit if all the compression
+  is to be done in a single step. In this case, avail_out must be at least
+  0.1% larger than avail_in plus 12 bytes.  If deflate does not return
+  Z_STREAM_END, then it must be called again as described above.
+
+    deflate() sets strm->adler to the adler32 checksum of all input read
+  so far (that is, total_in bytes).
+
+    deflate() may update data_type if it can make a good guess about
+  the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered
+  binary. This field is only for information purposes and does not affect
+  the compression algorithm in any manner.
+
+    deflate() returns Z_OK if some progress has been made (more input
+  processed or more output produced), Z_STREAM_END if all input has been
+  consumed and all output has been produced (only when flush is set to
+  Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
+  if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible
+  (for example avail_in or avail_out was zero).
+*/
+
+
+extern int zlib_deflateEnd (z_streamp strm);
+/*
+     All dynamically allocated data structures for this stream are freed.
+   This function discards any unprocessed input and does not flush any
+   pending output.
+
+     deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
+   stream state was inconsistent, Z_DATA_ERROR if the stream was freed
+   prematurely (some input or output was discarded). In the error case,
+   msg may be set but then points to a static string (which must not be
+   deallocated).
+*/
+
+
+extern int zlib_inflate_workspacesize (void);
+/*
+   Returns the number of bytes that needs to be allocated for a per-
+   stream workspace.  A pointer to this number of bytes should be
+   returned in stream->workspace before calling zlib_inflateInit().
+*/
+
+/* 
+extern int zlib_inflateInit (z_streamp strm);
+
+     Initializes the internal stream state for decompression. The fields
+   next_in, avail_in, and workspace must be initialized before by
+   the caller. If next_in is not NULL and avail_in is large enough (the exact
+   value depends on the compression method), inflateInit determines the
+   compression method from the zlib header and allocates all data structures
+   accordingly; otherwise the allocation will be deferred to the first call of
+   inflate.  If zalloc and zfree are set to NULL, inflateInit updates them to
+   use default allocation functions.
+
+     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+   version assumed by the caller.  msg is set to null if there is no error
+   message. inflateInit does not perform any decompression apart from reading
+   the zlib header if present: this will be done by inflate().  (So next_in and
+   avail_in may be modified, but next_out and avail_out are unchanged.)
+*/
+
+
+extern int zlib_inflate (z_streamp strm, int flush);
+/*
+    inflate decompresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full. It may introduce
+  some output latency (reading input without producing any output) except when
+  forced to flush.
+
+  The detailed semantics are as follows. inflate performs one or both of the
+  following actions:
+
+  - Decompress more input starting at next_in and update next_in and avail_in
+    accordingly. If not all input can be processed (because there is not
+    enough room in the output buffer), next_in is updated and processing
+    will resume at this point for the next call of inflate().
+
+  - Provide more output starting at next_out and update next_out and avail_out
+    accordingly.  inflate() provides as much output as possible, until there
+    is no more input data or no more space in the output buffer (see below
+    about the flush parameter).
+
+  Before the call of inflate(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming
+  more output, and updating the next_* and avail_* values accordingly.
+  The application can consume the uncompressed output when it wants, for
+  example when the output buffer is full (avail_out == 0), or after each
+  call of inflate(). If inflate returns Z_OK and with zero avail_out, it
+  must be called again after making room in the output buffer because there
+  might be more output pending.
+
+    The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH,
+  Z_FINISH, or Z_BLOCK. Z_SYNC_FLUSH requests that inflate() flush as much
+  output as possible to the output buffer. Z_BLOCK requests that inflate() stop
+  if and when it gets to the next deflate block boundary. When decoding the
+  zlib or gzip format, this will cause inflate() to return immediately after
+  the header and before the first block. When doing a raw inflate, inflate()
+  will go ahead and process the first block, and will return when it gets to
+  the end of that block, or when it runs out of data.
+
+    The Z_BLOCK option assists in appending to or combining deflate streams.
+  Also to assist in this, on return inflate() will set strm->data_type to the
+  number of unused bits in the last byte taken from strm->next_in, plus 64
+  if inflate() is currently decoding the last block in the deflate stream,
+  plus 128 if inflate() returned immediately after decoding an end-of-block
+  code or decoding the complete header up to just before the first byte of the
+  deflate stream. The end-of-block will not be indicated until all of the
+  uncompressed data from that block has been written to strm->next_out.  The
+  number of unused bits may in general be greater than seven, except when
+  bit 7 of data_type is set, in which case the number of unused bits will be
+  less than eight.
+
+    inflate() should normally be called until it returns Z_STREAM_END or an
+  error. However if all decompression is to be performed in a single step
+  (a single call of inflate), the parameter flush should be set to
+  Z_FINISH. In this case all pending input is processed and all pending
+  output is flushed; avail_out must be large enough to hold all the
+  uncompressed data. (The size of the uncompressed data may have been saved
+  by the compressor for this purpose.) The next operation on this stream must
+  be inflateEnd to deallocate the decompression state. The use of Z_FINISH
+  is never required, but can be used to inform inflate that a faster approach
+  may be used for the single inflate() call.
+
+     In this implementation, inflate() always flushes as much output as
+  possible to the output buffer, and always uses the faster approach on the
+  first call. So the only effect of the flush parameter in this implementation
+  is on the return value of inflate(), as noted below, or when it returns early
+  because Z_BLOCK is used.
+
+     If a preset dictionary is needed after this call (see inflateSetDictionary
+  below), inflate sets strm->adler to the adler32 checksum of the dictionary
+  chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
+  strm->adler to the adler32 checksum of all output produced so far (that is,
+  total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
+  below. At the end of the stream, inflate() checks that its computed adler32
+  checksum is equal to that saved by the compressor and returns Z_STREAM_END
+  only if the checksum is correct.
+
+    inflate() will decompress and check either zlib-wrapped or gzip-wrapped
+  deflate data.  The header type is detected automatically.  Any information
+  contained in the gzip header is not retained, so applications that need that
+  information should instead use raw inflate, see inflateInit2() below, or
+  inflateBack() and perform their own processing of the gzip header and
+  trailer.
+
+    inflate() returns Z_OK if some progress has been made (more input processed
+  or more output produced), Z_STREAM_END if the end of the compressed data has
+  been reached and all uncompressed output has been produced, Z_NEED_DICT if a
+  preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
+  corrupted (input stream not conforming to the zlib format or incorrect check
+  value), Z_STREAM_ERROR if the stream structure was inconsistent (for example
+  if next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory,
+  Z_BUF_ERROR if no progress is possible or if there was not enough room in the
+  output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and
+  inflate() can be called again with more input and more output space to
+  continue decompressing. If Z_DATA_ERROR is returned, the application may then
+  call inflateSync() to look for a good compression block if a partial recovery
+  of the data is desired.
+*/
+
+
+extern int zlib_inflateEnd (z_streamp strm);
+/*
+     All dynamically allocated data structures for this stream are freed.
+   This function discards any unprocessed input and does not flush any
+   pending output.
+
+     inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
+   was inconsistent. In the error case, msg may be set but then points to a
+   static string (which must not be deallocated).
+*/
+
+                        /* Advanced functions */
+
+/*
+    The following functions are needed only in some special applications.
+*/
+
+/*   
+extern int deflateInit2 (z_streamp strm,
+                                     int  level,
+                                     int  method,
+                                     int  windowBits,
+                                     int  memLevel,
+                                     int  strategy);
+
+     This is another version of deflateInit with more compression options. The
+   fields next_in, zalloc, zfree and opaque must be initialized before by
+   the caller.
+
+     The method parameter is the compression method. It must be Z_DEFLATED in
+   this version of the library.
+
+     The windowBits parameter is the base two logarithm of the window size
+   (the size of the history buffer).  It should be in the range 8..15 for this
+   version of the library. Larger values of this parameter result in better
+   compression at the expense of memory usage. The default value is 15 if
+   deflateInit is used instead.
+
+     The memLevel parameter specifies how much memory should be allocated
+   for the internal compression state. memLevel=1 uses minimum memory but
+   is slow and reduces compression ratio; memLevel=9 uses maximum memory
+   for optimal speed. The default value is 8. See zconf.h for total memory
+   usage as a function of windowBits and memLevel.
+
+     The strategy parameter is used to tune the compression algorithm. Use the
+   value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
+   filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no
+   string match).  Filtered data consists mostly of small values with a
+   somewhat random distribution. In this case, the compression algorithm is
+   tuned to compress them better. The effect of Z_FILTERED is to force more
+   Huffman coding and less string matching; it is somewhat intermediate
+   between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects
+   the compression ratio but not the correctness of the compressed output even
+   if it is not set appropriately.
+
+      deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid
+   method). msg is set to null if there is no error message.  deflateInit2 does
+   not perform any compression: this will be done by deflate().
+*/
+                            
+#if 0
+extern int zlib_deflateSetDictionary (z_streamp strm,
+						     const Byte *dictionary,
+						     uInt  dictLength);
+#endif
+/*
+     Initializes the compression dictionary from the given byte sequence
+   without producing any compressed output. This function must be called
+   immediately after deflateInit, deflateInit2 or deflateReset, before any
+   call of deflate. The compressor and decompressor must use exactly the same
+   dictionary (see inflateSetDictionary).
+
+     The dictionary should consist of strings (byte sequences) that are likely
+   to be encountered later in the data to be compressed, with the most commonly
+   used strings preferably put towards the end of the dictionary. Using a
+   dictionary is most useful when the data to be compressed is short and can be
+   predicted with good accuracy; the data can then be compressed better than
+   with the default empty dictionary.
+
+     Depending on the size of the compression data structures selected by
+   deflateInit or deflateInit2, a part of the dictionary may in effect be
+   discarded, for example if the dictionary is larger than the window size in
+   deflate or deflate2. Thus the strings most likely to be useful should be
+   put at the end of the dictionary, not at the front.
+
+     Upon return of this function, strm->adler is set to the Adler32 value
+   of the dictionary; the decompressor may later use this value to determine
+   which dictionary has been used by the compressor. (The Adler32 value
+   applies to the whole dictionary even if only a subset of the dictionary is
+   actually used by the compressor.)
+
+     deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
+   parameter is invalid (such as NULL dictionary) or the stream state is
+   inconsistent (for example if deflate has already been called for this stream
+   or if the compression method is bsort). deflateSetDictionary does not
+   perform any compression: this will be done by deflate().
+*/
+
+#if 0
+extern int zlib_deflateCopy (z_streamp dest, z_streamp source);
+#endif
+
+/*
+     Sets the destination stream as a complete copy of the source stream.
+
+     This function can be useful when several compression strategies will be
+   tried, for example when there are several ways of pre-processing the input
+   data with a filter. The streams that will be discarded should then be freed
+   by calling deflateEnd.  Note that deflateCopy duplicates the internal
+   compression state which can be quite large, so this strategy is slow and
+   can consume lots of memory.
+
+     deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+   (such as zalloc being NULL). msg is left unchanged in both source and
+   destination.
+*/
+
+extern int zlib_deflateReset (z_streamp strm);
+/*
+     This function is equivalent to deflateEnd followed by deflateInit,
+   but does not free and reallocate all the internal compression state.
+   The stream will keep the same compression level and any other attributes
+   that may have been set by deflateInit2.
+
+      deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being NULL).
+*/
+
+static inline unsigned long deflateBound(unsigned long s)
+{
+	return s + ((s + 7) >> 3) + ((s + 63) >> 6) + 11;
+}
+
+#if 0
+extern int zlib_deflateParams (z_streamp strm, int level, int strategy);
+#endif
+/*
+     Dynamically update the compression level and compression strategy.  The
+   interpretation of level and strategy is as in deflateInit2.  This can be
+   used to switch between compression and straight copy of the input data, or
+   to switch to a different kind of input data requiring a different
+   strategy. If the compression level is changed, the input available so far
+   is compressed with the old level (and may be flushed); the new level will
+   take effect only at the next call of deflate().
+
+     Before the call of deflateParams, the stream state must be set as for
+   a call of deflate(), since the currently available input may have to
+   be compressed and flushed. In particular, strm->avail_out must be non-zero.
+
+     deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
+   stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR
+   if strm->avail_out was zero.
+*/
+
+/*   
+extern int inflateInit2 (z_streamp strm, int  windowBits);
+
+     This is another version of inflateInit with an extra parameter. The
+   fields next_in, avail_in, zalloc, zfree and opaque must be initialized
+   before by the caller.
+
+     The windowBits parameter is the base two logarithm of the maximum window
+   size (the size of the history buffer).  It should be in the range 8..15 for
+   this version of the library. The default value is 15 if inflateInit is used
+   instead. windowBits must be greater than or equal to the windowBits value
+   provided to deflateInit2() while compressing, or it must be equal to 15 if
+   deflateInit2() was not used. If a compressed stream with a larger window
+   size is given as input, inflate() will return with the error code
+   Z_DATA_ERROR instead of trying to allocate a larger window.
+
+     windowBits can also be -8..-15 for raw inflate. In this case, -windowBits
+   determines the window size. inflate() will then process raw deflate data,
+   not looking for a zlib or gzip header, not generating a check value, and not
+   looking for any check values for comparison at the end of the stream. This
+   is for use with other formats that use the deflate compressed data format
+   such as zip.  Those formats provide their own check values. If a custom
+   format is developed using the raw deflate format for compressed data, it is
+   recommended that a check value such as an adler32 or a crc32 be applied to
+   the uncompressed data as is done in the zlib, gzip, and zip formats.  For
+   most applications, the zlib format should be used as is. Note that comments
+   above on the use in deflateInit2() applies to the magnitude of windowBits.
+
+     windowBits can also be greater than 15 for optional gzip decoding. Add
+   32 to windowBits to enable zlib and gzip decoding with automatic header
+   detection, or add 16 to decode only the gzip format (the zlib format will
+   return a Z_DATA_ERROR).  If a gzip stream is being decoded, strm->adler is
+   a crc32 instead of an adler32.
+
+     inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_STREAM_ERROR if a parameter is invalid (such as a null strm). msg
+   is set to null if there is no error message.  inflateInit2 does not perform
+   any decompression apart from reading the zlib header if present: this will
+   be done by inflate(). (So next_in and avail_in may be modified, but next_out
+   and avail_out are unchanged.)
+*/
+
+extern int zlib_inflateSetDictionary (z_streamp strm,
+						     const Byte *dictionary,
+						     uInt  dictLength);
+/*
+     Initializes the decompression dictionary from the given uncompressed byte
+   sequence. This function must be called immediately after a call of inflate,
+   if that call returned Z_NEED_DICT. The dictionary chosen by the compressor
+   can be determined from the adler32 value returned by that call of inflate.
+   The compressor and decompressor must use exactly the same dictionary (see
+   deflateSetDictionary).  For raw inflate, this function can be called
+   immediately after inflateInit2() or inflateReset() and before any call of
+   inflate() to set the dictionary.  The application must insure that the
+   dictionary that was used for compression is provided.
+
+     inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
+   parameter is invalid (such as NULL dictionary) or the stream state is
+   inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
+   expected one (incorrect adler32 value). inflateSetDictionary does not
+   perform any decompression: this will be done by subsequent calls of
+   inflate().
+*/
+
+#if 0
+extern int zlib_inflateSync (z_streamp strm);
+#endif
+/* 
+    Skips invalid compressed data until a full flush point (see above the
+  description of deflate with Z_FULL_FLUSH) can be found, or until all
+  available input is skipped. No output is provided.
+
+    inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
+  if no more input was provided, Z_DATA_ERROR if no flush point has been found,
+  or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
+  case, the application may save the current current value of total_in which
+  indicates where valid compressed data was found. In the error case, the
+  application may repeatedly call inflateSync, providing more input each time,
+  until success or end of the input data.
+*/
+
+extern int zlib_inflateReset (z_streamp strm);
+/*
+     This function is equivalent to inflateEnd followed by inflateInit,
+   but does not free and reallocate all the internal decompression state.
+   The stream will keep attributes that may have been set by inflateInit2.
+
+      inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being NULL).
+*/
+
+extern int zlib_inflateIncomp (z_stream *strm);
+/*
+     This function adds the data at next_in (avail_in bytes) to the output
+   history without performing any output.  There must be no pending output,
+   and the decompressor must be expecting to see the start of a block.
+   Calling this function is equivalent to decompressing a stored block
+   containing the data at next_in (except that the data is not output).
+*/
+
+#define zlib_deflateInit(strm, level) \
+	zlib_deflateInit2((strm), (level), Z_DEFLATED, MAX_WBITS, \
+			      DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY)
+#define zlib_inflateInit(strm) \
+	zlib_inflateInit2((strm), DEF_WBITS)
+
+extern int zlib_deflateInit2(z_streamp strm, int  level, int  method,
+                                      int windowBits, int memLevel,
+                                      int strategy);
+extern int zlib_inflateInit2(z_streamp strm, int  windowBits);
+
+#if !defined(_Z_UTIL_H) && !defined(NO_DUMMY_DECL)
+    struct internal_state {int dummy;}; /* hack for buggy compilers */
+#endif
+
+/* Utility function: initialize zlib, unpack binary blob, clean up zlib,
+ * return len or negative error code. */
+extern int zlib_inflate_blob(void *dst, unsigned dst_sz, const void *src, unsigned src_sz);
+
+#endif /* _ZLIB_H */
diff --git a/include/linux/zorro.h b/include/linux/zorro.h
new file mode 100644
index 00000000..dff42025
--- /dev/null
+++ b/include/linux/zorro.h
@@ -0,0 +1,234 @@
+/*
+ *  linux/zorro.h -- Amiga AutoConfig (Zorro) Bus Definitions
+ *
+ *  Copyright (C) 1995--2003 Geert Uytterhoeven
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License.  See the file COPYING in the main directory of this archive
+ *  for more details.
+ */
+
+#ifndef _LINUX_ZORRO_H
+#define _LINUX_ZORRO_H
+
+#include <linux/device.h>
+
+
+    /*
+     *  Each Zorro board has a 32-bit ID of the form
+     *
+     *      mmmmmmmmmmmmmmmmppppppppeeeeeeee
+     *
+     *  with
+     *
+     *      mmmmmmmmmmmmmmmm	16-bit Manufacturer ID (assigned by CBM (sigh))
+     *      pppppppp		8-bit Product ID (assigned by manufacturer)
+     *      eeeeeeee		8-bit Extended Product ID (currently only used
+     *				for some GVP boards)
+     */
+
+
+#define ZORRO_MANUF(id)		((id) >> 16)
+#define ZORRO_PROD(id)		(((id) >> 8) & 0xff)
+#define ZORRO_EPC(id)		((id) & 0xff)
+
+#define ZORRO_ID(manuf, prod, epc) \
+    ((ZORRO_MANUF_##manuf << 16) | ((prod) << 8) | (epc))
+
+typedef __u32 zorro_id;
+
+
+/* Include the ID list */
+#include <linux/zorro_ids.h>
+
+
+    /*
+     *  GVP identifies most of its products through the 'extended product code'
+     *  (epc). The epc has to be ANDed with the GVP_PRODMASK before the
+     *  identification.
+     */
+
+#define GVP_PRODMASK			(0xf8)
+#define GVP_SCSICLKMASK			(0x01)
+
+enum GVP_flags {
+    GVP_IO		= 0x01,
+    GVP_ACCEL		= 0x02,
+    GVP_SCSI		= 0x04,
+    GVP_24BITDMA	= 0x08,
+    GVP_25BITDMA	= 0x10,
+    GVP_NOBANK		= 0x20,
+    GVP_14MHZ		= 0x40,
+};
+
+
+struct Node {
+    struct  Node *ln_Succ;	/* Pointer to next (successor) */
+    struct  Node *ln_Pred;	/* Pointer to previous (predecessor) */
+    __u8    ln_Type;
+    __s8    ln_Pri;		/* Priority, for sorting */
+    __s8    *ln_Name;		/* ID string, null terminated */
+} __attribute__ ((packed));
+
+struct ExpansionRom {
+    /* -First 16 bytes of the expansion ROM */
+    __u8  er_Type;		/* Board type, size and flags */
+    __u8  er_Product;		/* Product number, assigned by manufacturer */
+    __u8  er_Flags;		/* Flags */
+    __u8  er_Reserved03;	/* Must be zero ($ff inverted) */
+    __u16 er_Manufacturer;	/* Unique ID, ASSIGNED BY COMMODORE-AMIGA! */
+    __u32 er_SerialNumber;	/* Available for use by manufacturer */
+    __u16 er_InitDiagVec;	/* Offset to optional "DiagArea" structure */
+    __u8  er_Reserved0c;
+    __u8  er_Reserved0d;
+    __u8  er_Reserved0e;
+    __u8  er_Reserved0f;
+} __attribute__ ((packed));
+
+/* er_Type board type bits */
+#define ERT_TYPEMASK	0xc0
+#define ERT_ZORROII	0xc0
+#define ERT_ZORROIII	0x80
+
+/* other bits defined in er_Type */
+#define ERTB_MEMLIST	5		/* Link RAM into free memory list */
+#define ERTF_MEMLIST	(1<<5)
+
+struct ConfigDev {
+    struct Node		cd_Node;
+    __u8		cd_Flags;	/* (read/write) */
+    __u8		cd_Pad;		/* reserved */
+    struct ExpansionRom cd_Rom;		/* copy of board's expansion ROM */
+    void		*cd_BoardAddr;	/* where in memory the board was placed */
+    __u32		cd_BoardSize;	/* size of board in bytes */
+    __u16		cd_SlotAddr;	/* which slot number (PRIVATE) */
+    __u16		cd_SlotSize;	/* number of slots (PRIVATE) */
+    void		*cd_Driver;	/* pointer to node of driver */
+    struct ConfigDev	*cd_NextCD;	/* linked list of drivers to config */
+    __u32		cd_Unused[4];	/* for whatever the driver wants */
+} __attribute__ ((packed));
+
+#define ZORRO_NUM_AUTO		16
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/mod_devicetable.h>
+
+#include <asm/zorro.h>
+
+
+    /*
+     *  Zorro devices
+     */
+
+struct zorro_dev {
+    struct ExpansionRom rom;
+    zorro_id id;
+    struct zorro_driver *driver;	/* which driver has allocated this device */
+    struct device dev;			/* Generic device interface */
+    u16 slotaddr;
+    u16 slotsize;
+    char name[64];
+    struct resource resource;
+};
+
+#define	to_zorro_dev(n)	container_of(n, struct zorro_dev, dev)
+
+
+    /*
+     *  Zorro bus
+     */
+
+extern struct bus_type zorro_bus_type;
+
+
+    /*
+     *  Zorro device drivers
+     */
+
+struct zorro_driver {
+    struct list_head node;
+    char *name;
+    const struct zorro_device_id *id_table;	/* NULL if wants all devices */
+    int (*probe)(struct zorro_dev *z, const struct zorro_device_id *id);	/* New device inserted */
+    void (*remove)(struct zorro_dev *z);	/* Device removed (NULL if not a hot-plug capable driver) */
+    struct device_driver driver;
+};
+
+#define	to_zorro_driver(drv)	container_of(drv, struct zorro_driver, driver)
+
+
+#define zorro_for_each_dev(dev)	\
+	for (dev = &zorro_autocon[0]; dev < zorro_autocon+zorro_num_autocon; dev++)
+
+
+/* New-style probing */
+extern int zorro_register_driver(struct zorro_driver *);
+extern void zorro_unregister_driver(struct zorro_driver *);
+extern const struct zorro_device_id *zorro_match_device(const struct zorro_device_id *ids, const struct zorro_dev *z);
+static inline struct zorro_driver *zorro_dev_driver(const struct zorro_dev *z)
+{
+    return z->driver;
+}
+
+
+extern unsigned int zorro_num_autocon;	/* # of autoconfig devices found */
+extern struct zorro_dev zorro_autocon[ZORRO_NUM_AUTO];
+
+
+    /*
+     *  Zorro Functions
+     */
+
+extern struct zorro_dev *zorro_find_device(zorro_id id,
+					   struct zorro_dev *from);
+
+#define zorro_resource_start(z)	((z)->resource.start)
+#define zorro_resource_end(z)	((z)->resource.end)
+#define zorro_resource_len(z)	(resource_size(&(z)->resource))
+#define zorro_resource_flags(z)	((z)->resource.flags)
+
+#define zorro_request_device(z, name) \
+    request_mem_region(zorro_resource_start(z), zorro_resource_len(z), name)
+#define zorro_release_device(z) \
+    release_mem_region(zorro_resource_start(z), zorro_resource_len(z))
+
+/* Similar to the helpers above, these manipulate per-zorro_dev
+ * driver-specific data.  They are really just a wrapper around
+ * the generic device structure functions of these calls.
+ */
+static inline void *zorro_get_drvdata (struct zorro_dev *z)
+{
+	return dev_get_drvdata(&z->dev);
+}
+
+static inline void zorro_set_drvdata (struct zorro_dev *z, void *data)
+{
+	dev_set_drvdata(&z->dev, data);
+}
+
+
+    /*
+     *  Bitmask indicating portions of available Zorro II RAM that are unused
+     *  by the system. Every bit represents a 64K chunk, for a maximum of 8MB
+     *  (128 chunks, physical 0x00200000-0x009fffff).
+     *
+     *  If you want to use (= allocate) portions of this RAM, you should clear
+     *  the corresponding bits.
+     */
+
+extern DECLARE_BITMAP(zorro_unused_z2ram, 128);
+
+#define Z2RAM_START		(0x00200000)
+#define Z2RAM_END		(0x00a00000)
+#define Z2RAM_SIZE		(0x00800000)
+#define Z2RAM_CHUNKSIZE		(0x00010000)
+#define Z2RAM_CHUNKMASK		(0x0000ffff)
+#define Z2RAM_CHUNKSHIFT	(16)
+
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_ZORRO_H */
diff --git a/include/linux/zorro_ids.h b/include/linux/zorro_ids.h
new file mode 100644
index 00000000..74bc53bc
--- /dev/null
+++ b/include/linux/zorro_ids.h
@@ -0,0 +1,552 @@
+/*
+ *  Zorro board IDs
+ *
+ *  Please keep sorted.
+ */
+
+
+#define ZORRO_MANUF_PACIFIC_PERIPHERALS				0x00D3
+#define  ZORRO_PROD_PACIFIC_PERIPHERALS_SE_2000_A500		ZORRO_ID(PACIFIC_PERIPHERALS, 0x00, 0)
+#define  ZORRO_PROD_PACIFIC_PERIPHERALS_SCSI			ZORRO_ID(PACIFIC_PERIPHERALS, 0x0A, 0)
+
+#define ZORRO_MANUF_MACROSYSTEMS_USA_2				0x0100
+#define  ZORRO_PROD_MACROSYSTEMS_WARP_ENGINE			ZORRO_ID(MACROSYSTEMS_USA_2, 0x13, 0)
+
+#define ZORRO_MANUF_KUPKE_1					0x00DD
+#define  ZORRO_PROD_KUPKE_GOLEM_RAM_BOX_2MB			ZORRO_ID(KUPKE_1, 0x00, 0)
+
+#define ZORRO_MANUF_MEMPHIS					0x0100
+#define  ZORRO_PROD_MEMPHIS_STORMBRINGER			ZORRO_ID(MEMPHIS, 0x00, 0)
+
+#define ZORRO_MANUF_3_STATE					0x0200
+#define  ZORRO_PROD_3_STATE_MEGAMIX_2000			ZORRO_ID(3_STATE, 0x02, 0)
+
+#define ZORRO_MANUF_COMMODORE_BRAUNSCHWEIG			0x0201
+#define  ZORRO_PROD_CBM_A2088_A2286				ZORRO_ID(COMMODORE_BRAUNSCHWEIG, 0x01, 0)
+#define  ZORRO_PROD_CBM_A2286					ZORRO_ID(COMMODORE_BRAUNSCHWEIG, 0x02, 0)
+#define  ZORRO_PROD_CBM_A4091_1					ZORRO_ID(COMMODORE_BRAUNSCHWEIG, 0x54, 0)
+#define  ZORRO_PROD_CBM_A2386SX_1				ZORRO_ID(COMMODORE_BRAUNSCHWEIG, 0x67, 0)
+
+#define ZORRO_MANUF_COMMODORE_WEST_CHESTER_1			0x0202
+#define  ZORRO_PROD_CBM_A2090A					ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x01, 0)
+#define  ZORRO_PROD_CBM_A590_A2091_1				ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x02, 0)
+#define  ZORRO_PROD_CBM_A590_A2091_2				ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x03, 0)
+#define  ZORRO_PROD_CBM_A2090B					ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x04, 0)
+#define  ZORRO_PROD_CBM_A2060					ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x09, 0)
+#define  ZORRO_PROD_CBM_A590_A2052_A2058_A2091			ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x0A, 0)
+#define  ZORRO_PROD_CBM_A560_RAM				ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x20, 0)
+#define  ZORRO_PROD_CBM_A2232_PROTOTYPE				ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x45, 0)
+#define  ZORRO_PROD_CBM_A2232					ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x46, 0)
+#define  ZORRO_PROD_CBM_A2620					ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x50, 0)
+#define  ZORRO_PROD_CBM_A2630					ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x51, 0)
+#define  ZORRO_PROD_CBM_A4091_2					ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x54, 0)
+#define  ZORRO_PROD_CBM_A2065_1					ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x5A, 0)
+#define  ZORRO_PROD_CBM_ROMULATOR				ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x60, 0)
+#define  ZORRO_PROD_CBM_A3000_TEST_FIXTURE			ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x61, 0)
+#define  ZORRO_PROD_CBM_A2386SX_2				ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x67, 0)
+#define  ZORRO_PROD_CBM_A2065_2					ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x70, 0)
+
+#define ZORRO_MANUF_COMMODORE_WEST_CHESTER_2			0x0203
+#define  ZORRO_PROD_CBM_A2090A_CM				ZORRO_ID(COMMODORE_WEST_CHESTER_2, 0x03, 0)
+
+#define ZORRO_MANUF_PROGRESSIVE_PERIPHERALS_AND_SYSTEMS_2	0x02F4
+#define  ZORRO_PROD_PPS_EXP8000					ZORRO_ID(PROGRESSIVE_PERIPHERALS_AND_SYSTEMS_2, 0x02, 0)
+
+#define ZORRO_MANUF_KOLFF_COMPUTER_SUPPLIES			0x02FF
+#define  ZORRO_PROD_KCS_POWER_PC_BOARD				ZORRO_ID(KOLFF_COMPUTER_SUPPLIES, 0x00, 0)
+
+#define ZORRO_MANUF_CARDCO_1					0x03EC
+#define  ZORRO_PROD_CARDCO_KRONOS_2000_1			ZORRO_ID(CARDCO_1, 0x04, 0)
+#define  ZORRO_PROD_CARDCO_A1000_1				ZORRO_ID(CARDCO_1, 0x0C, 0)
+#define  ZORRO_PROD_CARDCO_ESCORT				ZORRO_ID(CARDCO_1, 0x0E, 0)
+#define  ZORRO_PROD_CARDCO_A2410				ZORRO_ID(CARDCO_1, 0xF5, 0)
+
+#define ZORRO_MANUF_A_SQUARED					0x03ED
+#define  ZORRO_PROD_A_SQUARED_LIVE_2000				ZORRO_ID(A_SQUARED, 0x01, 0)
+
+#define ZORRO_MANUF_COMSPEC_COMMUNICATIONS			0x03EE
+#define  ZORRO_PROD_COMSPEC_COMMUNICATIONS_AX2000		ZORRO_ID(COMSPEC_COMMUNICATIONS, 0x01, 0)
+
+#define ZORRO_MANUF_ANAKIN_RESEARCH				0x03F1
+#define  ZORRO_PROD_ANAKIN_RESEARCH_EASYL			ZORRO_ID(ANAKIN_RESEARCH, 0x01, 0)
+
+#define ZORRO_MANUF_MICROBOTICS					0x03F2
+#define  ZORRO_PROD_MICROBOTICS_STARBOARD_II			ZORRO_ID(MICROBOTICS, 0x00, 0)
+#define  ZORRO_PROD_MICROBOTICS_STARDRIVE			ZORRO_ID(MICROBOTICS, 0x02, 0)
+#define  ZORRO_PROD_MICROBOTICS_8_UP_A				ZORRO_ID(MICROBOTICS, 0x03, 0)
+#define  ZORRO_PROD_MICROBOTICS_8_UP_Z				ZORRO_ID(MICROBOTICS, 0x04, 0)
+#define  ZORRO_PROD_MICROBOTICS_DELTA_RAM			ZORRO_ID(MICROBOTICS, 0x20, 0)
+#define  ZORRO_PROD_MICROBOTICS_8_STAR_RAM			ZORRO_ID(MICROBOTICS, 0x40, 0)
+#define  ZORRO_PROD_MICROBOTICS_8_STAR				ZORRO_ID(MICROBOTICS, 0x41, 0)
+#define  ZORRO_PROD_MICROBOTICS_VXL_RAM_32			ZORRO_ID(MICROBOTICS, 0x44, 0)
+#define  ZORRO_PROD_MICROBOTICS_VXL_68030			ZORRO_ID(MICROBOTICS, 0x45, 0)
+#define  ZORRO_PROD_MICROBOTICS_DELTA				ZORRO_ID(MICROBOTICS, 0x60, 0)
+#define  ZORRO_PROD_MICROBOTICS_MBX_1200_1200Z_RAM		ZORRO_ID(MICROBOTICS, 0x81, 0)
+#define  ZORRO_PROD_MICROBOTICS_HARDFRAME_2000_1		ZORRO_ID(MICROBOTICS, 0x96, 0)
+#define  ZORRO_PROD_MICROBOTICS_HARDFRAME_2000_2		ZORRO_ID(MICROBOTICS, 0x9E, 0)
+#define  ZORRO_PROD_MICROBOTICS_MBX_1200_1200Z			ZORRO_ID(MICROBOTICS, 0xC1, 0)
+
+#define ZORRO_MANUF_ACCESS_ASSOCIATES_ALEGRA			0x03F4
+
+#define ZORRO_MANUF_EXPANSION_TECHNOLOGIES			0x03F6
+
+#define ZORRO_MANUF_ASDG					0x03FF
+#define  ZORRO_PROD_ASDG_MEMORY_1				ZORRO_ID(ASDG, 0x01, 0)
+#define  ZORRO_PROD_ASDG_MEMORY_2				ZORRO_ID(ASDG, 0x02, 0)
+#define  ZORRO_PROD_ASDG_EB920_LAN_ROVER			ZORRO_ID(ASDG, 0xFE, 0)
+#define  ZORRO_PROD_ASDG_GPIB_DUALIEEE488_TWIN_X		ZORRO_ID(ASDG, 0xFF, 0)
+
+#define ZORRO_MANUF_IMTRONICS_1					0x0404
+#define  ZORRO_PROD_IMTRONICS_HURRICANE_2800_1			ZORRO_ID(IMTRONICS_1, 0x39, 0)
+#define  ZORRO_PROD_IMTRONICS_HURRICANE_2800_2			ZORRO_ID(IMTRONICS_1, 0x57, 0)
+
+#define ZORRO_MANUF_CBM_UNIVERSITY_OF_LOWELL			0x0406
+#define  ZORRO_PROD_CBM_A2410					ZORRO_ID(CBM_UNIVERSITY_OF_LOWELL, 0x00, 0)
+
+#define ZORRO_MANUF_AMERISTAR					0x041D
+#define  ZORRO_PROD_AMERISTAR_A2065				ZORRO_ID(AMERISTAR, 0x01, 0)
+#define  ZORRO_PROD_AMERISTAR_A560				ZORRO_ID(AMERISTAR, 0x09, 0)
+#define  ZORRO_PROD_AMERISTAR_A4066				ZORRO_ID(AMERISTAR, 0x0A, 0)
+
+#define ZORRO_MANUF_SUPRA					0x0420
+#define  ZORRO_PROD_SUPRA_SUPRADRIVE_4x4			ZORRO_ID(SUPRA, 0x01, 0)
+#define  ZORRO_PROD_SUPRA_1000_RAM				ZORRO_ID(SUPRA, 0x02, 0)
+#define  ZORRO_PROD_SUPRA_2000_DMA				ZORRO_ID(SUPRA, 0x03, 0)
+#define  ZORRO_PROD_SUPRA_500					ZORRO_ID(SUPRA, 0x05, 0)
+#define  ZORRO_PROD_SUPRA_500_SCSI				ZORRO_ID(SUPRA, 0x08, 0)
+#define  ZORRO_PROD_SUPRA_500XP_2000_RAM			ZORRO_ID(SUPRA, 0x09, 0)
+#define  ZORRO_PROD_SUPRA_500RX_2000_RAM			ZORRO_ID(SUPRA, 0x0A, 0)
+#define  ZORRO_PROD_SUPRA_2400ZI				ZORRO_ID(SUPRA, 0x0B, 0)
+#define  ZORRO_PROD_SUPRA_500XP_SUPRADRIVE_WORDSYNC		ZORRO_ID(SUPRA, 0x0C, 0)
+#define  ZORRO_PROD_SUPRA_SUPRADRIVE_WORDSYNC_II		ZORRO_ID(SUPRA, 0x0D, 0)
+#define  ZORRO_PROD_SUPRA_2400ZIPLUS				ZORRO_ID(SUPRA, 0x10, 0)
+
+#define ZORRO_MANUF_COMPUTER_SYSTEMS_ASSOCIATES			0x0422
+#define  ZORRO_PROD_CSA_MAGNUM					ZORRO_ID(COMPUTER_SYSTEMS_ASSOCIATES, 0x11, 0)
+#define  ZORRO_PROD_CSA_12_GAUGE				ZORRO_ID(COMPUTER_SYSTEMS_ASSOCIATES, 0x15, 0)
+
+#define ZORRO_MANUF_MARC_MICHAEL_GROTH				0x0439
+
+#define ZORRO_MANUF_M_TECH					0x0502
+#define  ZORRO_PROD_MTEC_AT500_1				ZORRO_ID(M_TECH, 0x03, 0)
+
+#define ZORRO_MANUF_GREAT_VALLEY_PRODUCTS_1			0x06E1
+#define  ZORRO_PROD_GVP_IMPACT_SERIES_I				ZORRO_ID(GREAT_VALLEY_PRODUCTS_1, 0x08, 0)
+
+#define ZORRO_MANUF_BYTEBOX					0x07DA
+#define  ZORRO_PROD_BYTEBOX_A500				ZORRO_ID(BYTEBOX, 0x00, 0)
+
+#define ZORRO_MANUF_DKB_POWER_COMPUTING				0x07DC
+#define  ZORRO_PROD_DKB_POWER_COMPUTING_SECUREKEY		ZORRO_ID(DKB_POWER_COMPUTING, 0x09, 0)
+#define  ZORRO_PROD_DKB_POWER_COMPUTING_DKM_3128		ZORRO_ID(DKB_POWER_COMPUTING, 0x0E, 0)
+#define  ZORRO_PROD_DKB_POWER_COMPUTING_RAPID_FIRE		ZORRO_ID(DKB_POWER_COMPUTING, 0x0F, 0)
+#define  ZORRO_PROD_DKB_POWER_COMPUTING_DKM_1202		ZORRO_ID(DKB_POWER_COMPUTING, 0x10, 0)
+#define  ZORRO_PROD_DKB_POWER_COMPUTING_COBRA_VIPER_II_68EC030	ZORRO_ID(DKB_POWER_COMPUTING, 0x12, 0)
+#define  ZORRO_PROD_DKB_POWER_COMPUTING_WILDFIRE_060_1		ZORRO_ID(DKB_POWER_COMPUTING, 0x17, 0)
+#define  ZORRO_PROD_DKB_POWER_COMPUTING_WILDFIRE_060_2		ZORRO_ID(DKB_POWER_COMPUTING, 0xFF, 0)
+
+#define ZORRO_MANUF_GREAT_VALLEY_PRODUCTS_2			0x07E1
+#define  ZORRO_PROD_GVP_IMPACT_SERIES_I_4K			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x01, 0)
+#define  ZORRO_PROD_GVP_IMPACT_SERIES_I_16K_2			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x02, 0)
+#define  ZORRO_PROD_GVP_IMPACT_SERIES_I_16K_3			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x03, 0)
+#define  ZORRO_PROD_GVP_IMPACT_3001_IDE_1			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x08, 0)
+#define  ZORRO_PROD_GVP_IMPACT_3001_RAM				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x09, 0)
+#define  ZORRO_PROD_GVP_IMPACT_SERIES_II_RAM_1			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0A, 0)
+#define  ZORRO_PROD_GVP_EPC_BASE				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0)
+#define  ZORRO_PROD_GVP_GFORCE_040_1				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0x20)
+#define  ZORRO_PROD_GVP_GFORCE_040_SCSI_1			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0x30)
+#define  ZORRO_PROD_GVP_A1291					ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0x40)
+#define  ZORRO_PROD_GVP_COMBO_030_R4				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0x60)
+#define  ZORRO_PROD_GVP_COMBO_030_R4_SCSI			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0x70)
+#define  ZORRO_PROD_GVP_PHONEPAK				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0x78)
+#define  ZORRO_PROD_GVP_IO_EXTENDER				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0x98)
+#define  ZORRO_PROD_GVP_GFORCE_030				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0xa0)
+#define  ZORRO_PROD_GVP_GFORCE_030_SCSI				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0xb0)
+#define  ZORRO_PROD_GVP_A530					ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0xc0)
+#define  ZORRO_PROD_GVP_A530_SCSI				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0xd0)
+#define  ZORRO_PROD_GVP_COMBO_030_R3				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0xe0)
+#define  ZORRO_PROD_GVP_COMBO_030_R3_SCSI			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0xf0)
+#define  ZORRO_PROD_GVP_SERIES_II				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0xf8)
+#define  ZORRO_PROD_GVP_IMPACT_3001_IDE_2			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0D, 0)
+/*#define  ZORRO_PROD_GVP_A2000_030				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0D, 0)*/
+/*#define  ZORRO_PROD_GVP_GFORCE_040_SCSI_2			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0D, 0)*/
+#define  ZORRO_PROD_GVP_GFORCE_040_060				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x16, 0)
+#define  ZORRO_PROD_GVP_IMPACT_VISION_24			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x20, 0)
+#define  ZORRO_PROD_GVP_GFORCE_040_2				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0xFF, 0)
+
+#define ZORRO_MANUF_CALIFORNIA_ACCESS_SYNERGY			0x07E5
+#define  ZORRO_PROD_CALIFORNIA_ACCESS_SYNERGY_MALIBU		ZORRO_ID(CALIFORNIA_ACCESS_SYNERGY, 0x01, 0)
+
+#define ZORRO_MANUF_XETEC					0x07E6
+#define  ZORRO_PROD_XETEC_FASTCARD				ZORRO_ID(XETEC, 0x01, 0)
+#define  ZORRO_PROD_XETEC_FASTCARD_RAM				ZORRO_ID(XETEC, 0x02, 0)
+#define  ZORRO_PROD_XETEC_FASTCARD_PLUS				ZORRO_ID(XETEC, 0x03, 0)
+
+#define ZORRO_MANUF_PROGRESSIVE_PERIPHERALS_AND_SYSTEMS		0x07EA
+#define  ZORRO_PROD_PPS_MERCURY					ZORRO_ID(PROGRESSIVE_PERIPHERALS_AND_SYSTEMS, 0x00, 0)
+#define  ZORRO_PROD_PPS_A3000_68040				ZORRO_ID(PROGRESSIVE_PERIPHERALS_AND_SYSTEMS, 0x01, 0)
+#define  ZORRO_PROD_PPS_A2000_68040				ZORRO_ID(PROGRESSIVE_PERIPHERALS_AND_SYSTEMS, 0x69, 0)
+#define  ZORRO_PROD_PPS_ZEUS					ZORRO_ID(PROGRESSIVE_PERIPHERALS_AND_SYSTEMS, 0x96, 0)
+#define  ZORRO_PROD_PPS_A500_68040				ZORRO_ID(PROGRESSIVE_PERIPHERALS_AND_SYSTEMS, 0xBB, 0)
+
+#define ZORRO_MANUF_XEBEC					0x07EC
+
+#define ZORRO_MANUF_SPIRIT_TECHNOLOGY				0x07F2
+#define  ZORRO_PROD_SPIRIT_TECHNOLOGY_INSIDER_IN1000		ZORRO_ID(SPIRIT_TECHNOLOGY, 0x01, 0)
+#define  ZORRO_PROD_SPIRIT_TECHNOLOGY_INSIDER_IN500		ZORRO_ID(SPIRIT_TECHNOLOGY, 0x02, 0)
+#define  ZORRO_PROD_SPIRIT_TECHNOLOGY_SIN500			ZORRO_ID(SPIRIT_TECHNOLOGY, 0x03, 0)
+#define  ZORRO_PROD_SPIRIT_TECHNOLOGY_HDA_506			ZORRO_ID(SPIRIT_TECHNOLOGY, 0x04, 0)
+#define  ZORRO_PROD_SPIRIT_TECHNOLOGY_AX_S			ZORRO_ID(SPIRIT_TECHNOLOGY, 0x05, 0)
+#define  ZORRO_PROD_SPIRIT_TECHNOLOGY_OCTABYTE			ZORRO_ID(SPIRIT_TECHNOLOGY, 0x06, 0)
+#define  ZORRO_PROD_SPIRIT_TECHNOLOGY_INMATE			ZORRO_ID(SPIRIT_TECHNOLOGY, 0x08, 0)
+
+#define ZORRO_MANUF_SPIRIT_TECHNOLOGY_2				0x07F3
+
+#define ZORRO_MANUF_BSC_ALFADATA_1				0x07FE
+#define  ZORRO_PROD_BSC_ALF_3_1					ZORRO_ID(BSC_ALFADATA_1, 0x03, 0)
+
+#define ZORRO_MANUF_BSC_ALFADATA_2				0x0801
+#define  ZORRO_PROD_BSC_ALF_2_1					ZORRO_ID(BSC_ALFADATA_2, 0x01, 0)
+#define  ZORRO_PROD_BSC_ALF_2_2					ZORRO_ID(BSC_ALFADATA_2, 0x02, 0)
+#define  ZORRO_PROD_BSC_ALF_3_2					ZORRO_ID(BSC_ALFADATA_2, 0x03, 0)
+
+#define ZORRO_MANUF_CARDCO_2					0x0802
+#define  ZORRO_PROD_CARDCO_KRONOS_2000_2			ZORRO_ID(CARDCO_2, 0x04, 0)
+#define  ZORRO_PROD_CARDCO_A1000_2				ZORRO_ID(CARDCO_2, 0x0C, 0)
+
+#define ZORRO_MANUF_JOCHHEIM					0x0804
+#define  ZORRO_PROD_JOCHHEIM_RAM				ZORRO_ID(JOCHHEIM, 0x01, 0)
+
+#define ZORRO_MANUF_CHECKPOINT_TECHNOLOGIES			0x0807
+#define  ZORRO_PROD_CHECKPOINT_TECHNOLOGIES_SERIAL_SOLUTION	ZORRO_ID(CHECKPOINT_TECHNOLOGIES, 0x00, 0)
+
+#define ZORRO_MANUF_EDOTRONIK					0x0810
+#define  ZORRO_PROD_EDOTRONIK_IEEE_488				ZORRO_ID(EDOTRONIK, 0x01, 0)
+#define  ZORRO_PROD_EDOTRONIK_8032				ZORRO_ID(EDOTRONIK, 0x02, 0)
+#define  ZORRO_PROD_EDOTRONIK_MULTISERIAL			ZORRO_ID(EDOTRONIK, 0x03, 0)
+#define  ZORRO_PROD_EDOTRONIK_VIDEODIGITIZER			ZORRO_ID(EDOTRONIK, 0x04, 0)
+#define  ZORRO_PROD_EDOTRONIK_PARALLEL_IO			ZORRO_ID(EDOTRONIK, 0x05, 0)
+#define  ZORRO_PROD_EDOTRONIK_PIC_PROTOYPING			ZORRO_ID(EDOTRONIK, 0x06, 0)
+#define  ZORRO_PROD_EDOTRONIK_ADC				ZORRO_ID(EDOTRONIK, 0x07, 0)
+#define  ZORRO_PROD_EDOTRONIK_VME				ZORRO_ID(EDOTRONIK, 0x08, 0)
+#define  ZORRO_PROD_EDOTRONIK_DSP96000				ZORRO_ID(EDOTRONIK, 0x09, 0)
+
+#define ZORRO_MANUF_NES_INC					0x0813
+#define  ZORRO_PROD_NES_INC_RAM					ZORRO_ID(NES_INC, 0x00, 0)
+
+#define ZORRO_MANUF_ICD						0x0817
+#define  ZORRO_PROD_ICD_ADVANTAGE_2000_SCSI			ZORRO_ID(ICD, 0x01, 0)
+#define  ZORRO_PROD_ICD_ADVANTAGE_IDE				ZORRO_ID(ICD, 0x03, 0)
+#define  ZORRO_PROD_ICD_ADVANTAGE_2080_RAM			ZORRO_ID(ICD, 0x04, 0)
+
+#define ZORRO_MANUF_KUPKE_2					0x0819
+#define  ZORRO_PROD_KUPKE_OMTI					ZORRO_ID(KUPKE_2, 0x01, 0)
+#define  ZORRO_PROD_KUPKE_SCSI_II				ZORRO_ID(KUPKE_2, 0x02, 0)
+#define  ZORRO_PROD_KUPKE_GOLEM_BOX				ZORRO_ID(KUPKE_2, 0x03, 0)
+#define  ZORRO_PROD_KUPKE_030_882				ZORRO_ID(KUPKE_2, 0x04, 0)
+#define  ZORRO_PROD_KUPKE_SCSI_AT				ZORRO_ID(KUPKE_2, 0x05, 0)
+
+#define ZORRO_MANUF_GREAT_VALLEY_PRODUCTS_3			0x081D
+#define  ZORRO_PROD_GVP_A2000_RAM8				ZORRO_ID(GREAT_VALLEY_PRODUCTS_3, 0x09, 0)
+#define  ZORRO_PROD_GVP_IMPACT_SERIES_II_RAM_2			ZORRO_ID(GREAT_VALLEY_PRODUCTS_3, 0x0A, 0)
+
+#define ZORRO_MANUF_INTERWORKS_NETWORK				0x081E
+
+#define ZORRO_MANUF_HARDITAL_SYNTHESIS				0x0820
+#define  ZORRO_PROD_HARDITAL_SYNTHESIS_TQM_68030_68882		ZORRO_ID(HARDITAL_SYNTHESIS, 0x14, 0)
+
+#define ZORRO_MANUF_APPLIED_ENGINEERING				0x0828
+#define  ZORRO_PROD_APPLIED_ENGINEERING_DL2000			ZORRO_ID(APPLIED_ENGINEERING, 0x10, 0)
+#define  ZORRO_PROD_APPLIED_ENGINEERING_RAM_WORKS		ZORRO_ID(APPLIED_ENGINEERING, 0xE0, 0)
+
+#define ZORRO_MANUF_BSC_ALFADATA_3				0x082C
+#define  ZORRO_PROD_BSC_OKTAGON_2008				ZORRO_ID(BSC_ALFADATA_3, 0x05, 0)
+#define  ZORRO_PROD_BSC_TANDEM_AT_2008_508			ZORRO_ID(BSC_ALFADATA_3, 0x06, 0)
+#define  ZORRO_PROD_BSC_ALFA_RAM_1200				ZORRO_ID(BSC_ALFADATA_3, 0x07, 0)
+#define  ZORRO_PROD_BSC_OKTAGON_2008_RAM			ZORRO_ID(BSC_ALFADATA_3, 0x08, 0)
+#define  ZORRO_PROD_BSC_MULTIFACE_I				ZORRO_ID(BSC_ALFADATA_3, 0x10, 0)
+#define  ZORRO_PROD_BSC_MULTIFACE_II				ZORRO_ID(BSC_ALFADATA_3, 0x11, 0)
+#define  ZORRO_PROD_BSC_MULTIFACE_III				ZORRO_ID(BSC_ALFADATA_3, 0x12, 0)
+#define  ZORRO_PROD_BSC_FRAMEMASTER_II				ZORRO_ID(BSC_ALFADATA_3, 0x20, 0)
+#define  ZORRO_PROD_BSC_GRAFFITI_RAM				ZORRO_ID(BSC_ALFADATA_3, 0x21, 0)
+#define  ZORRO_PROD_BSC_GRAFFITI_REG				ZORRO_ID(BSC_ALFADATA_3, 0x22, 0)
+#define  ZORRO_PROD_BSC_ISDN_MASTERCARD				ZORRO_ID(BSC_ALFADATA_3, 0x40, 0)
+#define  ZORRO_PROD_BSC_ISDN_MASTERCARD_II			ZORRO_ID(BSC_ALFADATA_3, 0x41, 0)
+
+#define ZORRO_MANUF_PHOENIX					0x0835
+#define  ZORRO_PROD_PHOENIX_ST506				ZORRO_ID(PHOENIX, 0x21, 0)
+#define  ZORRO_PROD_PHOENIX_SCSI				ZORRO_ID(PHOENIX, 0x22, 0)
+#define  ZORRO_PROD_PHOENIX_RAM					ZORRO_ID(PHOENIX, 0xBE, 0)
+
+#define ZORRO_MANUF_ADVANCED_STORAGE_SYSTEMS			0x0836
+#define  ZORRO_PROD_ADVANCED_STORAGE_SYSTEMS_NEXUS		ZORRO_ID(ADVANCED_STORAGE_SYSTEMS, 0x01, 0)
+#define  ZORRO_PROD_ADVANCED_STORAGE_SYSTEMS_NEXUS_RAM		ZORRO_ID(ADVANCED_STORAGE_SYSTEMS, 0x08, 0)
+
+#define ZORRO_MANUF_IMPULSE					0x0838
+#define  ZORRO_PROD_IMPULSE_FIRECRACKER_24			ZORRO_ID(IMPULSE, 0x00, 0)
+
+#define ZORRO_MANUF_IVS						0x0840
+#define  ZORRO_PROD_IVS_GRANDSLAM_PIC_2				ZORRO_ID(IVS, 0x02, 0)
+#define  ZORRO_PROD_IVS_GRANDSLAM_PIC_1				ZORRO_ID(IVS, 0x04, 0)
+#define  ZORRO_PROD_IVS_OVERDRIVE				ZORRO_ID(IVS, 0x10, 0)
+#define  ZORRO_PROD_IVS_TRUMPCARD_CLASSIC			ZORRO_ID(IVS, 0x30, 0)
+#define  ZORRO_PROD_IVS_TRUMPCARD_PRO_GRANDSLAM			ZORRO_ID(IVS, 0x34, 0)
+#define  ZORRO_PROD_IVS_META_4					ZORRO_ID(IVS, 0x40, 0)
+#define  ZORRO_PROD_IVS_WAVETOOLS				ZORRO_ID(IVS, 0xBF, 0)
+#define  ZORRO_PROD_IVS_VECTOR_1				ZORRO_ID(IVS, 0xF3, 0)
+#define  ZORRO_PROD_IVS_VECTOR_2				ZORRO_ID(IVS, 0xF4, 0)
+
+#define ZORRO_MANUF_VECTOR_1					0x0841
+#define  ZORRO_PROD_VECTOR_CONNECTION_1				ZORRO_ID(VECTOR_1, 0xE3, 0)
+
+#define ZORRO_MANUF_XPERT_PRODEV				0x0845
+#define  ZORRO_PROD_XPERT_PRODEV_VISIONA_RAM			ZORRO_ID(XPERT_PRODEV, 0x01, 0)
+#define  ZORRO_PROD_XPERT_PRODEV_VISIONA_REG			ZORRO_ID(XPERT_PRODEV, 0x02, 0)
+#define  ZORRO_PROD_XPERT_PRODEV_MERLIN_RAM			ZORRO_ID(XPERT_PRODEV, 0x03, 0)
+#define  ZORRO_PROD_XPERT_PRODEV_MERLIN_REG_1			ZORRO_ID(XPERT_PRODEV, 0x04, 0)
+#define  ZORRO_PROD_XPERT_PRODEV_MERLIN_REG_2			ZORRO_ID(XPERT_PRODEV, 0xC9, 0)
+
+#define ZORRO_MANUF_HYDRA_SYSTEMS				0x0849
+#define  ZORRO_PROD_HYDRA_SYSTEMS_AMIGANET			ZORRO_ID(HYDRA_SYSTEMS, 0x01, 0)
+
+#define ZORRO_MANUF_SUNRIZE_INDUSTRIES				0x084F
+#define  ZORRO_PROD_SUNRIZE_INDUSTRIES_AD1012			ZORRO_ID(SUNRIZE_INDUSTRIES, 0x01, 0)
+#define  ZORRO_PROD_SUNRIZE_INDUSTRIES_AD516			ZORRO_ID(SUNRIZE_INDUSTRIES, 0x02, 0)
+#define  ZORRO_PROD_SUNRIZE_INDUSTRIES_DD512			ZORRO_ID(SUNRIZE_INDUSTRIES, 0x03, 0)
+
+#define ZORRO_MANUF_TRICERATOPS					0x0850
+#define  ZORRO_PROD_TRICERATOPS_MULTI_IO			ZORRO_ID(TRICERATOPS, 0x01, 0)
+
+#define ZORRO_MANUF_APPLIED_MAGIC				0x0851
+#define  ZORRO_PROD_APPLIED_MAGIC_DMI_RESOLVER			ZORRO_ID(APPLIED_MAGIC, 0x01, 0)
+#define  ZORRO_PROD_APPLIED_MAGIC_DIGITAL_BROADCASTER		ZORRO_ID(APPLIED_MAGIC, 0x06, 0)
+
+#define ZORRO_MANUF_GFX_BASE					0x085E
+#define  ZORRO_PROD_GFX_BASE_GDA_1_VRAM				ZORRO_ID(GFX_BASE, 0x00, 0)
+#define  ZORRO_PROD_GFX_BASE_GDA_1				ZORRO_ID(GFX_BASE, 0x01, 0)
+
+#define ZORRO_MANUF_ROCTEC					0x0860
+#define  ZORRO_PROD_ROCTEC_RH_800C				ZORRO_ID(ROCTEC, 0x01, 0)
+#define  ZORRO_PROD_ROCTEC_RH_800C_RAM				ZORRO_ID(ROCTEC, 0x01, 0)
+
+#define ZORRO_MANUF_KATO					0x0861
+#define  ZORRO_PROD_KATO_MELODY					ZORRO_ID(KATO, 0x80, 0)
+/* ID clash!! */
+#define ZORRO_MANUF_HELFRICH_1					0x0861
+#define  ZORRO_PROD_HELFRICH_RAINBOW_II				ZORRO_ID(HELFRICH_1, 0x20, 0)
+#define  ZORRO_PROD_HELFRICH_RAINBOW_III			ZORRO_ID(HELFRICH_1, 0x21, 0)
+
+#define ZORRO_MANUF_ATLANTIS					0x0862
+
+#define ZORRO_MANUF_PROTAR					0x0864
+
+#define ZORRO_MANUF_ACS						0x0865
+
+#define ZORRO_MANUF_SOFTWARE_RESULTS_ENTERPRISES		0x0866
+#define  ZORRO_PROD_SOFTWARE_RESULTS_ENTERPRISES_GOLDEN_GATE_2_BUS_PLUS	ZORRO_ID(SOFTWARE_RESULTS_ENTERPRISES, 0x01, 0)
+
+#define ZORRO_MANUF_MASOBOSHI					0x086D
+#define  ZORRO_PROD_MASOBOSHI_MASTER_CARD_SC201			ZORRO_ID(MASOBOSHI, 0x03, 0)
+#define  ZORRO_PROD_MASOBOSHI_MASTER_CARD_MC702			ZORRO_ID(MASOBOSHI, 0x04, 0)
+#define  ZORRO_PROD_MASOBOSHI_MVD_819				ZORRO_ID(MASOBOSHI, 0x07, 0)
+
+#define ZORRO_MANUF_MAINHATTAN_DATA				0x086F
+#define  ZORRO_PROD_MAINHATTAN_DATA_IDE				ZORRO_ID(MAINHATTAN_DATA, 0x01, 0)
+
+#define ZORRO_MANUF_VILLAGE_TRONIC				0x0877
+#define  ZORRO_PROD_VILLAGE_TRONIC_DOMINO_RAM			ZORRO_ID(VILLAGE_TRONIC, 0x01, 0)
+#define  ZORRO_PROD_VILLAGE_TRONIC_DOMINO_REG			ZORRO_ID(VILLAGE_TRONIC, 0x02, 0)
+#define  ZORRO_PROD_VILLAGE_TRONIC_DOMINO_16M_PROTOTYPE		ZORRO_ID(VILLAGE_TRONIC, 0x03, 0)
+#define  ZORRO_PROD_VILLAGE_TRONIC_PICASSO_II_II_PLUS_RAM	ZORRO_ID(VILLAGE_TRONIC, 0x0B, 0)
+#define  ZORRO_PROD_VILLAGE_TRONIC_PICASSO_II_II_PLUS_REG	ZORRO_ID(VILLAGE_TRONIC, 0x0C, 0)
+#define  ZORRO_PROD_VILLAGE_TRONIC_PICASSO_II_II_PLUS_SEGMENTED_MODE	ZORRO_ID(VILLAGE_TRONIC, 0x0D, 0)
+#define  ZORRO_PROD_VILLAGE_TRONIC_PICASSO_IV_Z2_RAM1		ZORRO_ID(VILLAGE_TRONIC, 0x15, 0)
+#define  ZORRO_PROD_VILLAGE_TRONIC_PICASSO_IV_Z2_RAM2		ZORRO_ID(VILLAGE_TRONIC, 0x16, 0)
+#define  ZORRO_PROD_VILLAGE_TRONIC_PICASSO_IV_Z2_REG		ZORRO_ID(VILLAGE_TRONIC, 0x17, 0)
+#define  ZORRO_PROD_VILLAGE_TRONIC_PICASSO_IV_Z3		ZORRO_ID(VILLAGE_TRONIC, 0x18, 0)
+#define  ZORRO_PROD_VILLAGE_TRONIC_ARIADNE			ZORRO_ID(VILLAGE_TRONIC, 0xC9, 0)
+#define  ZORRO_PROD_VILLAGE_TRONIC_ARIADNE2			ZORRO_ID(VILLAGE_TRONIC, 0xCA, 0)
+
+#define ZORRO_MANUF_UTILITIES_UNLIMITED				0x087B
+#define  ZORRO_PROD_UTILITIES_UNLIMITED_EMPLANT_DELUXE		ZORRO_ID(UTILITIES_UNLIMITED, 0x15, 0)
+#define  ZORRO_PROD_UTILITIES_UNLIMITED_EMPLANT_DELUXE2		ZORRO_ID(UTILITIES_UNLIMITED, 0x20, 0)
+
+#define ZORRO_MANUF_AMITRIX					0x0880
+#define  ZORRO_PROD_AMITRIX_MULTI_IO				ZORRO_ID(AMITRIX, 0x01, 0)
+#define  ZORRO_PROD_AMITRIX_CD_RAM				ZORRO_ID(AMITRIX, 0x02, 0)
+
+#define ZORRO_MANUF_ARMAX					0x0885
+#define  ZORRO_PROD_ARMAX_OMNIBUS				ZORRO_ID(ARMAX, 0x00, 0)
+
+#define ZORRO_MANUF_ZEUS					0x088D
+#define  ZORRO_PROD_ZEUS_SPIDER					ZORRO_ID(ZEUS, 0x04, 0)
+
+#define ZORRO_MANUF_NEWTEK					0x088F
+#define  ZORRO_PROD_NEWTEK_VIDEOTOASTER				ZORRO_ID(NEWTEK, 0x00, 0)
+
+#define ZORRO_MANUF_M_TECH_GERMANY				0x0890
+#define  ZORRO_PROD_MTEC_AT500_2				ZORRO_ID(M_TECH_GERMANY, 0x01, 0)
+#define  ZORRO_PROD_MTEC_68030					ZORRO_ID(M_TECH_GERMANY, 0x03, 0)
+#define  ZORRO_PROD_MTEC_68020I					ZORRO_ID(M_TECH_GERMANY, 0x06, 0)
+#define  ZORRO_PROD_MTEC_A1200_T68030_RTC			ZORRO_ID(M_TECH_GERMANY, 0x20, 0)
+#define  ZORRO_PROD_MTEC_VIPER_MK_V_E_MATRIX_530		ZORRO_ID(M_TECH_GERMANY, 0x21, 0)
+#define  ZORRO_PROD_MTEC_8_MB_RAM				ZORRO_ID(M_TECH_GERMANY, 0x22, 0)
+#define  ZORRO_PROD_MTEC_VIPER_MK_V_E_MATRIX_530_SCSI_IDE	ZORRO_ID(M_TECH_GERMANY, 0x24, 0)
+
+#define ZORRO_MANUF_GREAT_VALLEY_PRODUCTS_4			0x0891
+#define  ZORRO_PROD_GVP_EGS_28_24_SPECTRUM_RAM			ZORRO_ID(GREAT_VALLEY_PRODUCTS_4, 0x01, 0)
+#define  ZORRO_PROD_GVP_EGS_28_24_SPECTRUM_REG			ZORRO_ID(GREAT_VALLEY_PRODUCTS_4, 0x02, 0)
+
+#define ZORRO_MANUF_APOLLO_1					0x0892
+#define  ZORRO_PROD_APOLLO_A1200				ZORRO_ID(APOLLO_1, 0x01, 0)
+
+#define ZORRO_MANUF_HELFRICH_2					0x0893
+#define  ZORRO_PROD_HELFRICH_PICCOLO_RAM			ZORRO_ID(HELFRICH_2, 0x05, 0)
+#define  ZORRO_PROD_HELFRICH_PICCOLO_REG			ZORRO_ID(HELFRICH_2, 0x06, 0)
+#define  ZORRO_PROD_HELFRICH_PEGGY_PLUS_MPEG			ZORRO_ID(HELFRICH_2, 0x07, 0)
+#define  ZORRO_PROD_HELFRICH_VIDEOCRUNCHER			ZORRO_ID(HELFRICH_2, 0x08, 0)
+#define  ZORRO_PROD_HELFRICH_SD64_RAM				ZORRO_ID(HELFRICH_2, 0x0A, 0)
+#define  ZORRO_PROD_HELFRICH_SD64_REG				ZORRO_ID(HELFRICH_2, 0x0B, 0)
+
+#define ZORRO_MANUF_MACROSYSTEMS_USA				0x089B
+#define  ZORRO_PROD_MACROSYSTEMS_WARP_ENGINE_40xx		ZORRO_ID(MACROSYSTEMS_USA, 0x13, 0)
+
+#define ZORRO_MANUF_ELBOX_COMPUTER				0x089E
+#define  ZORRO_PROD_ELBOX_COMPUTER_1200_4			ZORRO_ID(ELBOX_COMPUTER, 0x06, 0)
+
+#define ZORRO_MANUF_HARMS_PROFESSIONAL				0x0A00
+#define  ZORRO_PROD_HARMS_PROFESSIONAL_030_PLUS			ZORRO_ID(HARMS_PROFESSIONAL, 0x10, 0)
+#define  ZORRO_PROD_HARMS_PROFESSIONAL_3500			ZORRO_ID(HARMS_PROFESSIONAL, 0xD0, 0)
+
+#define ZORRO_MANUF_MICRONIK					0x0A50
+#define  ZORRO_PROD_MICRONIK_RCA_120				ZORRO_ID(MICRONIK, 0x0A, 0)
+
+#define ZORRO_MANUF_MICRONIK2					0x0F0F
+#define  ZORRO_PROD_MICRONIK2_Z3I				ZORRO_ID(MICRONIK2, 0x01, 0)
+
+#define ZORRO_MANUF_MEGAMICRO					0x1000
+#define  ZORRO_PROD_MEGAMICRO_SCRAM_500				ZORRO_ID(MEGAMICRO, 0x03, 0)
+#define  ZORRO_PROD_MEGAMICRO_SCRAM_500_RAM			ZORRO_ID(MEGAMICRO, 0x04, 0)
+
+#define ZORRO_MANUF_IMTRONICS_2					0x1028
+#define  ZORRO_PROD_IMTRONICS_HURRICANE_2800_3			ZORRO_ID(IMTRONICS_2, 0x39, 0)
+#define  ZORRO_PROD_IMTRONICS_HURRICANE_2800_4			ZORRO_ID(IMTRONICS_2, 0x57, 0)
+
+/* unofficial ID */
+#define ZORRO_MANUF_INDIVIDUAL_COMPUTERS			0x1212
+#define  ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA			ZORRO_ID(INDIVIDUAL_COMPUTERS, 0x00, 0)
+#define  ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF			ZORRO_ID(INDIVIDUAL_COMPUTERS, 0x17, 0)
+#define  ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL		ZORRO_ID(INDIVIDUAL_COMPUTERS, 0x2A, 0)
+
+#define ZORRO_MANUF_KUPKE_3					0x1248
+#define  ZORRO_PROD_KUPKE_GOLEM_HD_3000				ZORRO_ID(KUPKE_3, 0x01, 0)
+
+#define ZORRO_MANUF_ITH						0x1388
+#define  ZORRO_PROD_ITH_ISDN_MASTER_II				ZORRO_ID(ITH, 0x01, 0)
+
+#define ZORRO_MANUF_VMC						0x1389
+#define  ZORRO_PROD_VMC_ISDN_BLASTER_Z2				ZORRO_ID(VMC, 0x01, 0)
+#define  ZORRO_PROD_VMC_HYPERCOM_4				ZORRO_ID(VMC, 0x02, 0)
+
+#define ZORRO_MANUF_INFORMATION					0x157C
+#define  ZORRO_PROD_INFORMATION_ISDN_ENGINE_I			ZORRO_ID(INFORMATION, 0x64, 0)
+
+#define ZORRO_MANUF_VORTEX					0x2017
+#define  ZORRO_PROD_VORTEX_GOLDEN_GATE_80386SX			ZORRO_ID(VORTEX, 0x07, 0)
+#define  ZORRO_PROD_VORTEX_GOLDEN_GATE_RAM			ZORRO_ID(VORTEX, 0x08, 0)
+#define  ZORRO_PROD_VORTEX_GOLDEN_GATE_80486			ZORRO_ID(VORTEX, 0x09, 0)
+
+#define ZORRO_MANUF_EXPANSION_SYSTEMS				0x2062
+#define  ZORRO_PROD_EXPANSION_SYSTEMS_DATAFLYER_4000SX		ZORRO_ID(EXPANSION_SYSTEMS, 0x01, 0)
+#define  ZORRO_PROD_EXPANSION_SYSTEMS_DATAFLYER_4000SX_RAM	ZORRO_ID(EXPANSION_SYSTEMS, 0x02, 0)
+
+#define ZORRO_MANUF_READYSOFT					0x2100
+#define  ZORRO_PROD_READYSOFT_AMAX_II_IV			ZORRO_ID(READYSOFT, 0x01, 0)
+
+#define ZORRO_MANUF_PHASE5					0x2140
+#define  ZORRO_PROD_PHASE5_BLIZZARD_RAM				ZORRO_ID(PHASE5, 0x01, 0)
+#define  ZORRO_PROD_PHASE5_BLIZZARD				ZORRO_ID(PHASE5, 0x02, 0)
+#define  ZORRO_PROD_PHASE5_BLIZZARD_1220_IV			ZORRO_ID(PHASE5, 0x06, 0)
+#define  ZORRO_PROD_PHASE5_FASTLANE_Z3_RAM			ZORRO_ID(PHASE5, 0x0A, 0)
+#define  ZORRO_PROD_PHASE5_BLIZZARD_1230_II_FASTLANE_Z3_CYBERSCSI_CYBERSTORM060	ZORRO_ID(PHASE5, 0x0B, 0)
+#define  ZORRO_PROD_PHASE5_BLIZZARD_1220_CYBERSTORM		ZORRO_ID(PHASE5, 0x0C, 0)
+#define  ZORRO_PROD_PHASE5_BLIZZARD_1230			ZORRO_ID(PHASE5, 0x0D, 0)
+#define  ZORRO_PROD_PHASE5_BLIZZARD_1230_IV_1260		ZORRO_ID(PHASE5, 0x11, 0)
+#define  ZORRO_PROD_PHASE5_BLIZZARD_2060			ZORRO_ID(PHASE5, 0x18, 0)
+#define  ZORRO_PROD_PHASE5_CYBERSTORM_MK_II			ZORRO_ID(PHASE5, 0x19, 0)
+#define  ZORRO_PROD_PHASE5_CYBERVISION64			ZORRO_ID(PHASE5, 0x22, 0)
+#define  ZORRO_PROD_PHASE5_CYBERVISION64_3D_PROTOTYPE		ZORRO_ID(PHASE5, 0x32, 0)
+#define  ZORRO_PROD_PHASE5_CYBERVISION64_3D			ZORRO_ID(PHASE5, 0x43, 0)
+#define  ZORRO_PROD_PHASE5_CYBERSTORM_MK_III			ZORRO_ID(PHASE5, 0x64, 0)
+#define  ZORRO_PROD_PHASE5_BLIZZARD_603E_PLUS			ZORRO_ID(PHASE5, 0x6e, 0)
+
+#define ZORRO_MANUF_DPS						0x2169
+#define  ZORRO_PROD_DPS_PERSONAL_ANIMATION_RECORDER		ZORRO_ID(DPS, 0x01, 0)
+
+#define ZORRO_MANUF_APOLLO_2					0x2200
+#define  ZORRO_PROD_APOLLO_A620_68020_1				ZORRO_ID(APOLLO_2, 0x00, 0)
+#define  ZORRO_PROD_APOLLO_A620_68020_2				ZORRO_ID(APOLLO_2, 0x01, 0)
+
+#define ZORRO_MANUF_APOLLO_3					0x2222
+#define  ZORRO_PROD_APOLLO_AT_APOLLO				ZORRO_ID(APOLLO_3, 0x22, 0)
+#define  ZORRO_PROD_APOLLO_1230_1240_1260_2030_4040_4060	ZORRO_ID(APOLLO_3, 0x23, 0)
+
+#define ZORRO_MANUF_PETSOFF_LP					0x38A5
+#define  ZORRO_PROD_PETSOFF_LP_DELFINA				ZORRO_ID(PETSOFF_LP, 0x00, 0)
+#define  ZORRO_PROD_PETSOFF_LP_DELFINA_LITE			ZORRO_ID(PETSOFF_LP, 0x01, 0)
+
+#define ZORRO_MANUF_UWE_GERLACH					0x3FF7
+#define  ZORRO_PROD_UWE_GERLACH_RAM_ROM				ZORRO_ID(UWE_GERLACH, 0xd4, 0)
+
+#define ZORRO_MANUF_ACT						0x4231
+#define  ZORRO_PROD_ACT_PRELUDE					ZORRO_ID(ACT, 0x01, 0)
+
+#define ZORRO_MANUF_MACROSYSTEMS_GERMANY			0x4754
+#define  ZORRO_PROD_MACROSYSTEMS_MAESTRO			ZORRO_ID(MACROSYSTEMS_GERMANY, 0x03, 0)
+#define  ZORRO_PROD_MACROSYSTEMS_VLAB				ZORRO_ID(MACROSYSTEMS_GERMANY, 0x04, 0)
+#define  ZORRO_PROD_MACROSYSTEMS_MAESTRO_PRO			ZORRO_ID(MACROSYSTEMS_GERMANY, 0x05, 0)
+#define  ZORRO_PROD_MACROSYSTEMS_RETINA				ZORRO_ID(MACROSYSTEMS_GERMANY, 0x06, 0)
+#define  ZORRO_PROD_MACROSYSTEMS_MULTI_EVOLUTION		ZORRO_ID(MACROSYSTEMS_GERMANY, 0x08, 0)
+#define  ZORRO_PROD_MACROSYSTEMS_TOCCATA			ZORRO_ID(MACROSYSTEMS_GERMANY, 0x0C, 0)
+#define  ZORRO_PROD_MACROSYSTEMS_RETINA_Z3			ZORRO_ID(MACROSYSTEMS_GERMANY, 0x10, 0)
+#define  ZORRO_PROD_MACROSYSTEMS_VLAB_MOTION			ZORRO_ID(MACROSYSTEMS_GERMANY, 0x12, 0)
+#define  ZORRO_PROD_MACROSYSTEMS_ALTAIS				ZORRO_ID(MACROSYSTEMS_GERMANY, 0x13, 0)
+#define  ZORRO_PROD_MACROSYSTEMS_FALCON_040			ZORRO_ID(MACROSYSTEMS_GERMANY, 0xFD, 0)
+
+#define ZORRO_MANUF_COMBITEC					0x6766
+
+#define ZORRO_MANUF_SKI_PERIPHERALS				0x8000
+#define  ZORRO_PROD_SKI_PERIPHERALS_MAST_FIREBALL		ZORRO_ID(SKI_PERIPHERALS, 0x08, 0)
+#define  ZORRO_PROD_SKI_PERIPHERALS_SCSI_DUAL_SERIAL		ZORRO_ID(SKI_PERIPHERALS, 0x80, 0)
+
+#define ZORRO_MANUF_REIS_WARE_2					0xA9AD
+#define  ZORRO_PROD_REIS_WARE_SCAN_KING				ZORRO_ID(REIS_WARE_2, 0x11, 0)
+
+#define ZORRO_MANUF_CAMERON					0xAA01
+#define  ZORRO_PROD_CAMERON_PERSONAL_A4				ZORRO_ID(CAMERON, 0x10, 0)
+
+#define ZORRO_MANUF_REIS_WARE					0xAA11
+#define  ZORRO_PROD_REIS_WARE_HANDYSCANNER			ZORRO_ID(REIS_WARE, 0x11, 0)
+
+#define ZORRO_MANUF_PHOENIX_2					0xB5A8
+#define  ZORRO_PROD_PHOENIX_ST506_2				ZORRO_ID(PHOENIX_2, 0x21, 0)
+#define  ZORRO_PROD_PHOENIX_SCSI_2				ZORRO_ID(PHOENIX_2, 0x22, 0)
+#define  ZORRO_PROD_PHOENIX_RAM_2				ZORRO_ID(PHOENIX_2, 0xBE, 0)
+
+#define ZORRO_MANUF_COMBITEC_2					0xC008
+#define  ZORRO_PROD_COMBITEC_HD					ZORRO_ID(COMBITEC_2, 0x2A, 0)
+#define  ZORRO_PROD_COMBITEC_SRAM				ZORRO_ID(COMBITEC_2, 0x2B, 0)
+
+
+    /*
+     *  Test and illegal Manufacturer IDs.
+     */
+
+#define ZORRO_MANUF_HACKER					0x07DB
+#define  ZORRO_PROD_GENERAL_PROTOTYPE				ZORRO_ID(HACKER, 0x00, 0)
+#define  ZORRO_PROD_HACKER_SCSI					ZORRO_ID(HACKER, 0x01, 0)
+#define  ZORRO_PROD_RESOURCE_MANAGEMENT_FORCE_QUICKNET_QN2000	ZORRO_ID(HACKER, 0x02, 0)
+#define  ZORRO_PROD_VECTOR_CONNECTION_2				ZORRO_ID(HACKER, 0xE0, 0)
+#define  ZORRO_PROD_VECTOR_CONNECTION_3				ZORRO_ID(HACKER, 0xE1, 0)
+#define  ZORRO_PROD_VECTOR_CONNECTION_4				ZORRO_ID(HACKER, 0xE2, 0)
+#define  ZORRO_PROD_VECTOR_CONNECTION_5				ZORRO_ID(HACKER, 0xE3, 0)
diff --git a/include/linux/zutil.h b/include/linux/zutil.h
new file mode 100644
index 00000000..6adfa9a6
--- /dev/null
+++ b/include/linux/zutil.h
@@ -0,0 +1,106 @@
+/* zutil.h -- internal interface and configuration of the compression library
+ * Copyright (C) 1995-1998 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* @(#) $Id: zutil.h,v 1.1 2000/01/01 03:32:23 davem Exp $ */
+
+#ifndef _Z_UTIL_H
+#define _Z_UTIL_H
+
+#include <linux/zlib.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+typedef unsigned char  uch;
+typedef unsigned short ush;
+typedef unsigned long  ulg;
+
+        /* common constants */
+
+#define STORED_BLOCK 0
+#define STATIC_TREES 1
+#define DYN_TREES    2
+/* The three kinds of block type */
+
+#define MIN_MATCH  3
+#define MAX_MATCH  258
+/* The minimum and maximum match lengths */
+
+#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */
+
+        /* target dependencies */
+
+        /* Common defaults */
+
+#ifndef OS_CODE
+#  define OS_CODE  0x03  /* assume Unix */
+#endif
+
+         /* functions */
+
+typedef uLong (*check_func) (uLong check, const Byte *buf,
+				       uInt len);
+
+
+                        /* checksum functions */
+
+#define BASE 65521L /* largest prime smaller than 65536 */
+#define NMAX 5552
+/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
+
+#define DO1(buf,i)  {s1 += buf[i]; s2 += s1;}
+#define DO2(buf,i)  DO1(buf,i); DO1(buf,i+1);
+#define DO4(buf,i)  DO2(buf,i); DO2(buf,i+2);
+#define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
+#define DO16(buf)   DO8(buf,0); DO8(buf,8);
+
+/* ========================================================================= */
+/*
+     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+   return the updated checksum. If buf is NULL, this function returns
+   the required initial value for the checksum.
+   An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
+   much faster. Usage example:
+
+     uLong adler = adler32(0L, NULL, 0);
+
+     while (read_buffer(buffer, length) != EOF) {
+       adler = adler32(adler, buffer, length);
+     }
+     if (adler != original_adler) error();
+*/
+static inline uLong zlib_adler32(uLong adler,
+				 const Byte *buf,
+				 uInt len)
+{
+    unsigned long s1 = adler & 0xffff;
+    unsigned long s2 = (adler >> 16) & 0xffff;
+    int k;
+
+    if (buf == NULL) return 1L;
+
+    while (len > 0) {
+        k = len < NMAX ? len : NMAX;
+        len -= k;
+        while (k >= 16) {
+            DO16(buf);
+	    buf += 16;
+            k -= 16;
+        }
+        if (k != 0) do {
+            s1 += *buf++;
+	    s2 += s1;
+        } while (--k);
+        s1 %= BASE;
+        s2 %= BASE;
+    }
+    return (s2 << 16) | s1;
+}
+
+#endif /* _Z_UTIL_H */
diff --git a/include/math-emu/double.h b/include/math-emu/double.h
new file mode 100644
index 00000000..655ccf1c
--- /dev/null
+++ b/include/math-emu/double.h
@@ -0,0 +1,205 @@
+/* Software floating-point emulation.
+   Definitions for IEEE Double Precision
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz),
+		  David S. Miller (davem@redhat.com) and
+		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef    __MATH_EMU_DOUBLE_H__
+#define    __MATH_EMU_DOUBLE_H__
+
+#if _FP_W_TYPE_SIZE < 32
+#error "Here's a nickel kid.  Go buy yourself a real computer."
+#endif
+
+#if _FP_W_TYPE_SIZE < 64
+#define _FP_FRACTBITS_D		(2 * _FP_W_TYPE_SIZE)
+#else
+#define _FP_FRACTBITS_D		_FP_W_TYPE_SIZE
+#endif
+
+#define _FP_FRACBITS_D		53
+#define _FP_FRACXBITS_D		(_FP_FRACTBITS_D - _FP_FRACBITS_D)
+#define _FP_WFRACBITS_D		(_FP_WORKBITS + _FP_FRACBITS_D)
+#define _FP_WFRACXBITS_D	(_FP_FRACTBITS_D - _FP_WFRACBITS_D)
+#define _FP_EXPBITS_D		11
+#define _FP_EXPBIAS_D		1023
+#define _FP_EXPMAX_D		2047
+
+#define _FP_QNANBIT_D		\
+	((_FP_W_TYPE)1 << (_FP_FRACBITS_D-2) % _FP_W_TYPE_SIZE)
+#define _FP_IMPLBIT_D		\
+	((_FP_W_TYPE)1 << (_FP_FRACBITS_D-1) % _FP_W_TYPE_SIZE)
+#define _FP_OVERFLOW_D		\
+	((_FP_W_TYPE)1 << _FP_WFRACBITS_D % _FP_W_TYPE_SIZE)
+
+#if _FP_W_TYPE_SIZE < 64
+
+union _FP_UNION_D
+{
+  double flt;
+  struct {
+#if __BYTE_ORDER == __BIG_ENDIAN
+    unsigned sign  : 1;
+    unsigned exp   : _FP_EXPBITS_D;
+    unsigned frac1 : _FP_FRACBITS_D - (_FP_IMPLBIT_D != 0) - _FP_W_TYPE_SIZE;
+    unsigned frac0 : _FP_W_TYPE_SIZE;
+#else
+    unsigned frac0 : _FP_W_TYPE_SIZE;
+    unsigned frac1 : _FP_FRACBITS_D - (_FP_IMPLBIT_D != 0) - _FP_W_TYPE_SIZE;
+    unsigned exp   : _FP_EXPBITS_D;
+    unsigned sign  : 1;
+#endif
+  } bits __attribute__((packed));
+};
+
+#define FP_DECL_D(X)		_FP_DECL(2,X)
+#define FP_UNPACK_RAW_D(X,val)	_FP_UNPACK_RAW_2(D,X,val)
+#define FP_UNPACK_RAW_DP(X,val)	_FP_UNPACK_RAW_2_P(D,X,val)
+#define FP_PACK_RAW_D(val,X)	_FP_PACK_RAW_2(D,val,X)
+#define FP_PACK_RAW_DP(val,X)		\
+  do {					\
+    if (!FP_INHIBIT_RESULTS)		\
+      _FP_PACK_RAW_2_P(D,val,X);	\
+  } while (0)
+
+#define FP_UNPACK_D(X,val)		\
+  do {					\
+    _FP_UNPACK_RAW_2(D,X,val);		\
+    _FP_UNPACK_CANONICAL(D,2,X);	\
+  } while (0)
+
+#define FP_UNPACK_DP(X,val)		\
+  do {					\
+    _FP_UNPACK_RAW_2_P(D,X,val);	\
+    _FP_UNPACK_CANONICAL(D,2,X);	\
+  } while (0)
+
+#define FP_PACK_D(val,X)		\
+  do {					\
+    _FP_PACK_CANONICAL(D,2,X);		\
+    _FP_PACK_RAW_2(D,val,X);		\
+  } while (0)
+
+#define FP_PACK_DP(val,X)		\
+  do {					\
+    _FP_PACK_CANONICAL(D,2,X);		\
+    if (!FP_INHIBIT_RESULTS)		\
+      _FP_PACK_RAW_2_P(D,val,X);	\
+  } while (0)
+
+#define FP_ISSIGNAN_D(X)		_FP_ISSIGNAN(D,2,X)
+#define FP_NEG_D(R,X)			_FP_NEG(D,2,R,X)
+#define FP_ADD_D(R,X,Y)			_FP_ADD(D,2,R,X,Y)
+#define FP_SUB_D(R,X,Y)			_FP_SUB(D,2,R,X,Y)
+#define FP_MUL_D(R,X,Y)			_FP_MUL(D,2,R,X,Y)
+#define FP_DIV_D(R,X,Y)			_FP_DIV(D,2,R,X,Y)
+#define FP_SQRT_D(R,X)			_FP_SQRT(D,2,R,X)
+#define _FP_SQRT_MEAT_D(R,S,T,X,Q)	_FP_SQRT_MEAT_2(R,S,T,X,Q)
+
+#define FP_CMP_D(r,X,Y,un)	_FP_CMP(D,2,r,X,Y,un)
+#define FP_CMP_EQ_D(r,X,Y)	_FP_CMP_EQ(D,2,r,X,Y)
+
+#define FP_TO_INT_D(r,X,rsz,rsg)	_FP_TO_INT(D,2,r,X,rsz,rsg)
+#define FP_TO_INT_ROUND_D(r,X,rsz,rsg)	_FP_TO_INT_ROUND(D,2,r,X,rsz,rsg)
+#define FP_FROM_INT_D(X,r,rs,rt)	_FP_FROM_INT(D,2,X,r,rs,rt)
+
+#define _FP_FRAC_HIGH_D(X)	_FP_FRAC_HIGH_2(X)
+#define _FP_FRAC_HIGH_RAW_D(X)	_FP_FRAC_HIGH_2(X)
+
+#else
+
+union _FP_UNION_D
+{
+  double flt;
+  struct {
+#if __BYTE_ORDER == __BIG_ENDIAN
+    unsigned sign : 1;
+    unsigned exp  : _FP_EXPBITS_D;
+    unsigned long frac : _FP_FRACBITS_D - (_FP_IMPLBIT_D != 0);
+#else
+    unsigned long frac : _FP_FRACBITS_D - (_FP_IMPLBIT_D != 0);
+    unsigned exp  : _FP_EXPBITS_D;
+    unsigned sign : 1;
+#endif
+  } bits __attribute__((packed));
+};
+
+#define FP_DECL_D(X)		_FP_DECL(1,X)
+#define FP_UNPACK_RAW_D(X,val)	_FP_UNPACK_RAW_1(D,X,val)
+#define FP_UNPACK_RAW_DP(X,val)	_FP_UNPACK_RAW_1_P(D,X,val)
+#define FP_PACK_RAW_D(val,X)	_FP_PACK_RAW_1(D,val,X)
+#define FP_PACK_RAW_DP(val,X)		\
+  do {					\
+    if (!FP_INHIBIT_RESULTS)		\
+      _FP_PACK_RAW_1_P(D,val,X);	\
+  } while (0)
+
+#define FP_UNPACK_D(X,val)		\
+  do {					\
+    _FP_UNPACK_RAW_1(D,X,val);		\
+    _FP_UNPACK_CANONICAL(D,1,X);	\
+  } while (0)
+
+#define FP_UNPACK_DP(X,val)		\
+  do {					\
+    _FP_UNPACK_RAW_1_P(D,X,val);	\
+    _FP_UNPACK_CANONICAL(D,1,X);	\
+  } while (0)
+
+#define FP_PACK_D(val,X)		\
+  do {					\
+    _FP_PACK_CANONICAL(D,1,X);		\
+    _FP_PACK_RAW_1(D,val,X);		\
+  } while (0)
+
+#define FP_PACK_DP(val,X)		\
+  do {					\
+    _FP_PACK_CANONICAL(D,1,X);		\
+    if (!FP_INHIBIT_RESULTS)		\
+      _FP_PACK_RAW_1_P(D,val,X);	\
+  } while (0)
+
+#define FP_ISSIGNAN_D(X)		_FP_ISSIGNAN(D,1,X)
+#define FP_NEG_D(R,X)			_FP_NEG(D,1,R,X)
+#define FP_ADD_D(R,X,Y)			_FP_ADD(D,1,R,X,Y)
+#define FP_SUB_D(R,X,Y)			_FP_SUB(D,1,R,X,Y)
+#define FP_MUL_D(R,X,Y)			_FP_MUL(D,1,R,X,Y)
+#define FP_DIV_D(R,X,Y)			_FP_DIV(D,1,R,X,Y)
+#define FP_SQRT_D(R,X)			_FP_SQRT(D,1,R,X)
+#define _FP_SQRT_MEAT_D(R,S,T,X,Q)	_FP_SQRT_MEAT_1(R,S,T,X,Q)
+
+/* The implementation of _FP_MUL_D and _FP_DIV_D should be chosen by
+   the target machine.  */
+
+#define FP_CMP_D(r,X,Y,un)	_FP_CMP(D,1,r,X,Y,un)
+#define FP_CMP_EQ_D(r,X,Y)	_FP_CMP_EQ(D,1,r,X,Y)
+
+#define FP_TO_INT_D(r,X,rsz,rsg)	_FP_TO_INT(D,1,r,X,rsz,rsg)
+#define FP_TO_INT_ROUND_D(r,X,rsz,rsg)	_FP_TO_INT_ROUND(D,1,r,X,rsz,rsg)
+#define FP_FROM_INT_D(X,r,rs,rt)	_FP_FROM_INT(D,1,X,r,rs,rt)
+
+#define _FP_FRAC_HIGH_D(X)	_FP_FRAC_HIGH_1(X)
+#define _FP_FRAC_HIGH_RAW_D(X)	_FP_FRAC_HIGH_1(X)
+
+#endif /* W_TYPE_SIZE < 64 */
+
+
+#endif /* __MATH_EMU_DOUBLE_H__ */
diff --git a/include/math-emu/op-1.h b/include/math-emu/op-1.h
new file mode 100644
index 00000000..3be3bb42
--- /dev/null
+++ b/include/math-emu/op-1.h
@@ -0,0 +1,303 @@
+/* Software floating-point emulation.
+   Basic one-word fraction declaration and manipulation.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz),
+		  David S. Miller (davem@redhat.com) and
+		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef    __MATH_EMU_OP_1_H__
+#define    __MATH_EMU_OP_1_H__
+
+#define _FP_FRAC_DECL_1(X)	_FP_W_TYPE X##_f=0
+#define _FP_FRAC_COPY_1(D,S)	(D##_f = S##_f)
+#define _FP_FRAC_SET_1(X,I)	(X##_f = I)
+#define _FP_FRAC_HIGH_1(X)	(X##_f)
+#define _FP_FRAC_LOW_1(X)	(X##_f)
+#define _FP_FRAC_WORD_1(X,w)	(X##_f)
+
+#define _FP_FRAC_ADDI_1(X,I)	(X##_f += I)
+#define _FP_FRAC_SLL_1(X,N)			\
+  do {						\
+    if (__builtin_constant_p(N) && (N) == 1)	\
+      X##_f += X##_f;				\
+    else					\
+      X##_f <<= (N);				\
+  } while (0)
+#define _FP_FRAC_SRL_1(X,N)	(X##_f >>= N)
+
+/* Right shift with sticky-lsb.  */
+#define _FP_FRAC_SRS_1(X,N,sz)	__FP_FRAC_SRS_1(X##_f, N, sz)
+
+#define __FP_FRAC_SRS_1(X,N,sz)						\
+   (X = (X >> (N) | (__builtin_constant_p(N) && (N) == 1		\
+		     ? X & 1 : (X << (_FP_W_TYPE_SIZE - (N))) != 0)))
+
+#define _FP_FRAC_ADD_1(R,X,Y)	(R##_f = X##_f + Y##_f)
+#define _FP_FRAC_SUB_1(R,X,Y)	(R##_f = X##_f - Y##_f)
+#define _FP_FRAC_DEC_1(X,Y)	(X##_f -= Y##_f)
+#define _FP_FRAC_CLZ_1(z, X)	__FP_CLZ(z, X##_f)
+
+/* Predicates */
+#define _FP_FRAC_NEGP_1(X)	((_FP_WS_TYPE)X##_f < 0)
+#define _FP_FRAC_ZEROP_1(X)	(X##_f == 0)
+#define _FP_FRAC_OVERP_1(fs,X)	(X##_f & _FP_OVERFLOW_##fs)
+#define _FP_FRAC_CLEAR_OVERP_1(fs,X)	(X##_f &= ~_FP_OVERFLOW_##fs)
+#define _FP_FRAC_EQ_1(X, Y)	(X##_f == Y##_f)
+#define _FP_FRAC_GE_1(X, Y)	(X##_f >= Y##_f)
+#define _FP_FRAC_GT_1(X, Y)	(X##_f > Y##_f)
+
+#define _FP_ZEROFRAC_1		0
+#define _FP_MINFRAC_1		1
+#define _FP_MAXFRAC_1		(~(_FP_WS_TYPE)0)
+
+/*
+ * Unpack the raw bits of a native fp value.  Do not classify or
+ * normalize the data.
+ */
+
+#define _FP_UNPACK_RAW_1(fs, X, val)				\
+  do {								\
+    union _FP_UNION_##fs _flo; _flo.flt = (val);		\
+								\
+    X##_f = _flo.bits.frac;					\
+    X##_e = _flo.bits.exp;					\
+    X##_s = _flo.bits.sign;					\
+  } while (0)
+
+#define _FP_UNPACK_RAW_1_P(fs, X, val)				\
+  do {								\
+    union _FP_UNION_##fs *_flo =				\
+      (union _FP_UNION_##fs *)(val);				\
+								\
+    X##_f = _flo->bits.frac;					\
+    X##_e = _flo->bits.exp;					\
+    X##_s = _flo->bits.sign;					\
+  } while (0)
+
+/*
+ * Repack the raw bits of a native fp value.
+ */
+
+#define _FP_PACK_RAW_1(fs, val, X)				\
+  do {								\
+    union _FP_UNION_##fs _flo;					\
+								\
+    _flo.bits.frac = X##_f;					\
+    _flo.bits.exp  = X##_e;					\
+    _flo.bits.sign = X##_s;					\
+								\
+    (val) = _flo.flt;						\
+  } while (0)
+
+#define _FP_PACK_RAW_1_P(fs, val, X)				\
+  do {								\
+    union _FP_UNION_##fs *_flo =				\
+      (union _FP_UNION_##fs *)(val);				\
+								\
+    _flo->bits.frac = X##_f;					\
+    _flo->bits.exp  = X##_e;					\
+    _flo->bits.sign = X##_s;					\
+  } while (0)
+
+
+/*
+ * Multiplication algorithms:
+ */
+
+/* Basic.  Assuming the host word size is >= 2*FRACBITS, we can do the
+   multiplication immediately.  */
+
+#define _FP_MUL_MEAT_1_imm(wfracbits, R, X, Y)				\
+  do {									\
+    R##_f = X##_f * Y##_f;						\
+    /* Normalize since we know where the msb of the multiplicands	\
+       were (bit B), we know that the msb of the of the product is	\
+       at either 2B or 2B-1.  */					\
+    _FP_FRAC_SRS_1(R, wfracbits-1, 2*wfracbits);			\
+  } while (0)
+
+/* Given a 1W * 1W => 2W primitive, do the extended multiplication.  */
+
+#define _FP_MUL_MEAT_1_wide(wfracbits, R, X, Y, doit)			\
+  do {									\
+    _FP_W_TYPE _Z_f0, _Z_f1;						\
+    doit(_Z_f1, _Z_f0, X##_f, Y##_f);					\
+    /* Normalize since we know where the msb of the multiplicands	\
+       were (bit B), we know that the msb of the of the product is	\
+       at either 2B or 2B-1.  */					\
+    _FP_FRAC_SRS_2(_Z, wfracbits-1, 2*wfracbits);			\
+    R##_f = _Z_f0;							\
+  } while (0)
+
+/* Finally, a simple widening multiply algorithm.  What fun!  */
+
+#define _FP_MUL_MEAT_1_hard(wfracbits, R, X, Y)				\
+  do {									\
+    _FP_W_TYPE _xh, _xl, _yh, _yl, _z_f0, _z_f1, _a_f0, _a_f1;		\
+									\
+    /* split the words in half */					\
+    _xh = X##_f >> (_FP_W_TYPE_SIZE/2);					\
+    _xl = X##_f & (((_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE/2)) - 1);		\
+    _yh = Y##_f >> (_FP_W_TYPE_SIZE/2);					\
+    _yl = Y##_f & (((_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE/2)) - 1);		\
+									\
+    /* multiply the pieces */						\
+    _z_f0 = _xl * _yl;							\
+    _a_f0 = _xh * _yl;							\
+    _a_f1 = _xl * _yh;							\
+    _z_f1 = _xh * _yh;							\
+									\
+    /* reassemble into two full words */				\
+    if ((_a_f0 += _a_f1) < _a_f1)					\
+      _z_f1 += (_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE/2);			\
+    _a_f1 = _a_f0 >> (_FP_W_TYPE_SIZE/2);				\
+    _a_f0 = _a_f0 << (_FP_W_TYPE_SIZE/2);				\
+    _FP_FRAC_ADD_2(_z, _z, _a);						\
+									\
+    /* normalize */							\
+    _FP_FRAC_SRS_2(_z, wfracbits - 1, 2*wfracbits);			\
+    R##_f = _z_f0;							\
+  } while (0)
+
+
+/*
+ * Division algorithms:
+ */
+
+/* Basic.  Assuming the host word size is >= 2*FRACBITS, we can do the
+   division immediately.  Give this macro either _FP_DIV_HELP_imm for
+   C primitives or _FP_DIV_HELP_ldiv for the ISO function.  Which you
+   choose will depend on what the compiler does with divrem4.  */
+
+#define _FP_DIV_MEAT_1_imm(fs, R, X, Y, doit)		\
+  do {							\
+    _FP_W_TYPE _q, _r;					\
+    X##_f <<= (X##_f < Y##_f				\
+	       ? R##_e--, _FP_WFRACBITS_##fs		\
+	       : _FP_WFRACBITS_##fs - 1);		\
+    doit(_q, _r, X##_f, Y##_f);				\
+    R##_f = _q | (_r != 0);				\
+  } while (0)
+
+/* GCC's longlong.h defines a 2W / 1W => (1W,1W) primitive udiv_qrnnd
+   that may be useful in this situation.  This first is for a primitive
+   that requires normalization, the second for one that does not.  Look
+   for UDIV_NEEDS_NORMALIZATION to tell which your machine needs.  */
+
+#define _FP_DIV_MEAT_1_udiv_norm(fs, R, X, Y)				\
+  do {									\
+    _FP_W_TYPE _nh, _nl, _q, _r, _y;					\
+									\
+    /* Normalize Y -- i.e. make the most significant bit set.  */	\
+    _y = Y##_f << _FP_WFRACXBITS_##fs;					\
+									\
+    /* Shift X op correspondingly high, that is, up one full word.  */	\
+    if (X##_f < Y##_f)							\
+      {									\
+	R##_e--;							\
+	_nl = 0;							\
+	_nh = X##_f;							\
+      }									\
+    else								\
+      {									\
+	_nl = X##_f << (_FP_W_TYPE_SIZE - 1);				\
+	_nh = X##_f >> 1;						\
+      }									\
+    									\
+    udiv_qrnnd(_q, _r, _nh, _nl, _y);					\
+    R##_f = _q | (_r != 0);						\
+  } while (0)
+
+#define _FP_DIV_MEAT_1_udiv(fs, R, X, Y)		\
+  do {							\
+    _FP_W_TYPE _nh, _nl, _q, _r;			\
+    if (X##_f < Y##_f)					\
+      {							\
+	R##_e--;					\
+	_nl = X##_f << _FP_WFRACBITS_##fs;		\
+	_nh = X##_f >> _FP_WFRACXBITS_##fs;		\
+      }							\
+    else						\
+      {							\
+	_nl = X##_f << (_FP_WFRACBITS_##fs - 1);	\
+	_nh = X##_f >> (_FP_WFRACXBITS_##fs + 1);	\
+      }							\
+    udiv_qrnnd(_q, _r, _nh, _nl, Y##_f);		\
+    R##_f = _q | (_r != 0);				\
+  } while (0)
+  
+  
+/*
+ * Square root algorithms:
+ * We have just one right now, maybe Newton approximation
+ * should be added for those machines where division is fast.
+ */
+ 
+#define _FP_SQRT_MEAT_1(R, S, T, X, q)			\
+  do {							\
+    while (q != _FP_WORK_ROUND)				\
+      {							\
+        T##_f = S##_f + q;				\
+        if (T##_f <= X##_f)				\
+          {						\
+            S##_f = T##_f + q;				\
+            X##_f -= T##_f;				\
+            R##_f += q;					\
+          }						\
+        _FP_FRAC_SLL_1(X, 1);				\
+        q >>= 1;					\
+      }							\
+    if (X##_f)						\
+      {							\
+	if (S##_f < X##_f)				\
+	  R##_f |= _FP_WORK_ROUND;			\
+	R##_f |= _FP_WORK_STICKY;			\
+      }							\
+  } while (0)
+
+/*
+ * Assembly/disassembly for converting to/from integral types.  
+ * No shifting or overflow handled here.
+ */
+
+#define _FP_FRAC_ASSEMBLE_1(r, X, rsize)	(r = X##_f)
+#define _FP_FRAC_DISASSEMBLE_1(X, r, rsize)	(X##_f = r)
+
+
+/*
+ * Convert FP values between word sizes
+ */
+
+#define _FP_FRAC_CONV_1_1(dfs, sfs, D, S)				\
+  do {									\
+    D##_f = S##_f;							\
+    if (_FP_WFRACBITS_##sfs > _FP_WFRACBITS_##dfs)			\
+      {									\
+	if (S##_c != FP_CLS_NAN)					\
+	  _FP_FRAC_SRS_1(D, (_FP_WFRACBITS_##sfs-_FP_WFRACBITS_##dfs),	\
+			 _FP_WFRACBITS_##sfs);				\
+	else								\
+	  _FP_FRAC_SRL_1(D, (_FP_WFRACBITS_##sfs-_FP_WFRACBITS_##dfs));	\
+      }									\
+    else								\
+      D##_f <<= _FP_WFRACBITS_##dfs - _FP_WFRACBITS_##sfs;		\
+  } while (0)
+
+#endif /* __MATH_EMU_OP_1_H__ */
diff --git a/include/math-emu/op-2.h b/include/math-emu/op-2.h
new file mode 100644
index 00000000..4f26ecc1
--- /dev/null
+++ b/include/math-emu/op-2.h
@@ -0,0 +1,613 @@
+/* Software floating-point emulation.
+   Basic two-word fraction declaration and manipulation.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz),
+		  David S. Miller (davem@redhat.com) and
+		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef __MATH_EMU_OP_2_H__
+#define __MATH_EMU_OP_2_H__
+
+#define _FP_FRAC_DECL_2(X)	_FP_W_TYPE X##_f0 = 0, X##_f1 = 0
+#define _FP_FRAC_COPY_2(D,S)	(D##_f0 = S##_f0, D##_f1 = S##_f1)
+#define _FP_FRAC_SET_2(X,I)	__FP_FRAC_SET_2(X, I)
+#define _FP_FRAC_HIGH_2(X)	(X##_f1)
+#define _FP_FRAC_LOW_2(X)	(X##_f0)
+#define _FP_FRAC_WORD_2(X,w)	(X##_f##w)
+
+#define _FP_FRAC_SLL_2(X,N)						\
+  do {									\
+    if ((N) < _FP_W_TYPE_SIZE)						\
+      {									\
+	if (__builtin_constant_p(N) && (N) == 1) 			\
+	  {								\
+	    X##_f1 = X##_f1 + X##_f1 + (((_FP_WS_TYPE)(X##_f0)) < 0);	\
+	    X##_f0 += X##_f0;						\
+	  }								\
+	else								\
+	  {								\
+	    X##_f1 = X##_f1 << (N) | X##_f0 >> (_FP_W_TYPE_SIZE - (N));	\
+	    X##_f0 <<= (N);						\
+	  }								\
+      }									\
+    else								\
+      {									\
+	X##_f1 = X##_f0 << ((N) - _FP_W_TYPE_SIZE);			\
+	X##_f0 = 0;							\
+      }									\
+  } while (0)
+
+#define _FP_FRAC_SRL_2(X,N)						\
+  do {									\
+    if ((N) < _FP_W_TYPE_SIZE)						\
+      {									\
+	X##_f0 = X##_f0 >> (N) | X##_f1 << (_FP_W_TYPE_SIZE - (N));	\
+	X##_f1 >>= (N);							\
+      }									\
+    else								\
+      {									\
+	X##_f0 = X##_f1 >> ((N) - _FP_W_TYPE_SIZE);			\
+	X##_f1 = 0;							\
+      }									\
+  } while (0)
+
+/* Right shift with sticky-lsb.  */
+#define _FP_FRAC_SRS_2(X,N,sz)						\
+  do {									\
+    if ((N) < _FP_W_TYPE_SIZE)						\
+      {									\
+	X##_f0 = (X##_f1 << (_FP_W_TYPE_SIZE - (N)) | X##_f0 >> (N) |	\
+		  (__builtin_constant_p(N) && (N) == 1			\
+		   ? X##_f0 & 1						\
+		   : (X##_f0 << (_FP_W_TYPE_SIZE - (N))) != 0));	\
+	X##_f1 >>= (N);							\
+      }									\
+    else								\
+      {									\
+	X##_f0 = (X##_f1 >> ((N) - _FP_W_TYPE_SIZE) |			\
+		(((X##_f1 << (2*_FP_W_TYPE_SIZE - (N))) | X##_f0) != 0)); \
+	X##_f1 = 0;							\
+      }									\
+  } while (0)
+
+#define _FP_FRAC_ADDI_2(X,I)	\
+  __FP_FRAC_ADDI_2(X##_f1, X##_f0, I)
+
+#define _FP_FRAC_ADD_2(R,X,Y)	\
+  __FP_FRAC_ADD_2(R##_f1, R##_f0, X##_f1, X##_f0, Y##_f1, Y##_f0)
+
+#define _FP_FRAC_SUB_2(R,X,Y)	\
+  __FP_FRAC_SUB_2(R##_f1, R##_f0, X##_f1, X##_f0, Y##_f1, Y##_f0)
+
+#define _FP_FRAC_DEC_2(X,Y)	\
+  __FP_FRAC_DEC_2(X##_f1, X##_f0, Y##_f1, Y##_f0)
+
+#define _FP_FRAC_CLZ_2(R,X)	\
+  do {				\
+    if (X##_f1)			\
+      __FP_CLZ(R,X##_f1);	\
+    else 			\
+    {				\
+      __FP_CLZ(R,X##_f0);	\
+      R += _FP_W_TYPE_SIZE;	\
+    }				\
+  } while(0)
+
+/* Predicates */
+#define _FP_FRAC_NEGP_2(X)	((_FP_WS_TYPE)X##_f1 < 0)
+#define _FP_FRAC_ZEROP_2(X)	((X##_f1 | X##_f0) == 0)
+#define _FP_FRAC_OVERP_2(fs,X)	(_FP_FRAC_HIGH_##fs(X) & _FP_OVERFLOW_##fs)
+#define _FP_FRAC_CLEAR_OVERP_2(fs,X)	(_FP_FRAC_HIGH_##fs(X) &= ~_FP_OVERFLOW_##fs)
+#define _FP_FRAC_EQ_2(X, Y)	(X##_f1 == Y##_f1 && X##_f0 == Y##_f0)
+#define _FP_FRAC_GT_2(X, Y)	\
+  (X##_f1 > Y##_f1 || (X##_f1 == Y##_f1 && X##_f0 > Y##_f0))
+#define _FP_FRAC_GE_2(X, Y)	\
+  (X##_f1 > Y##_f1 || (X##_f1 == Y##_f1 && X##_f0 >= Y##_f0))
+
+#define _FP_ZEROFRAC_2		0, 0
+#define _FP_MINFRAC_2		0, 1
+#define _FP_MAXFRAC_2		(~(_FP_WS_TYPE)0), (~(_FP_WS_TYPE)0)
+
+/*
+ * Internals 
+ */
+
+#define __FP_FRAC_SET_2(X,I1,I0)	(X##_f0 = I0, X##_f1 = I1)
+
+#define __FP_CLZ_2(R, xh, xl)	\
+  do {				\
+    if (xh)			\
+      __FP_CLZ(R,xh);		\
+    else 			\
+    {				\
+      __FP_CLZ(R,xl);		\
+      R += _FP_W_TYPE_SIZE;	\
+    }				\
+  } while(0)
+
+#if 0
+
+#ifndef __FP_FRAC_ADDI_2
+#define __FP_FRAC_ADDI_2(xh, xl, i)	\
+  (xh += ((xl += i) < i))
+#endif
+#ifndef __FP_FRAC_ADD_2
+#define __FP_FRAC_ADD_2(rh, rl, xh, xl, yh, yl)	\
+  (rh = xh + yh + ((rl = xl + yl) < xl))
+#endif
+#ifndef __FP_FRAC_SUB_2
+#define __FP_FRAC_SUB_2(rh, rl, xh, xl, yh, yl)	\
+  (rh = xh - yh - ((rl = xl - yl) > xl))
+#endif
+#ifndef __FP_FRAC_DEC_2
+#define __FP_FRAC_DEC_2(xh, xl, yh, yl)	\
+  do {					\
+    UWtype _t = xl;			\
+    xh -= yh + ((xl -= yl) > _t);	\
+  } while (0)
+#endif
+
+#else
+
+#undef __FP_FRAC_ADDI_2
+#define __FP_FRAC_ADDI_2(xh, xl, i)	add_ssaaaa(xh, xl, xh, xl, 0, i)
+#undef __FP_FRAC_ADD_2
+#define __FP_FRAC_ADD_2			add_ssaaaa
+#undef __FP_FRAC_SUB_2
+#define __FP_FRAC_SUB_2			sub_ddmmss
+#undef __FP_FRAC_DEC_2
+#define __FP_FRAC_DEC_2(xh, xl, yh, yl)	sub_ddmmss(xh, xl, xh, xl, yh, yl)
+
+#endif
+
+/*
+ * Unpack the raw bits of a native fp value.  Do not classify or
+ * normalize the data.
+ */
+
+#define _FP_UNPACK_RAW_2(fs, X, val)			\
+  do {							\
+    union _FP_UNION_##fs _flo; _flo.flt = (val);	\
+							\
+    X##_f0 = _flo.bits.frac0;				\
+    X##_f1 = _flo.bits.frac1;				\
+    X##_e  = _flo.bits.exp;				\
+    X##_s  = _flo.bits.sign;				\
+  } while (0)
+
+#define _FP_UNPACK_RAW_2_P(fs, X, val)			\
+  do {							\
+    union _FP_UNION_##fs *_flo =			\
+      (union _FP_UNION_##fs *)(val);			\
+							\
+    X##_f0 = _flo->bits.frac0;				\
+    X##_f1 = _flo->bits.frac1;				\
+    X##_e  = _flo->bits.exp;				\
+    X##_s  = _flo->bits.sign;				\
+  } while (0)
+
+
+/*
+ * Repack the raw bits of a native fp value.
+ */
+
+#define _FP_PACK_RAW_2(fs, val, X)			\
+  do {							\
+    union _FP_UNION_##fs _flo;				\
+							\
+    _flo.bits.frac0 = X##_f0;				\
+    _flo.bits.frac1 = X##_f1;				\
+    _flo.bits.exp   = X##_e;				\
+    _flo.bits.sign  = X##_s;				\
+							\
+    (val) = _flo.flt;					\
+  } while (0)
+
+#define _FP_PACK_RAW_2_P(fs, val, X)			\
+  do {							\
+    union _FP_UNION_##fs *_flo =			\
+      (union _FP_UNION_##fs *)(val);			\
+							\
+    _flo->bits.frac0 = X##_f0;				\
+    _flo->bits.frac1 = X##_f1;				\
+    _flo->bits.exp   = X##_e;				\
+    _flo->bits.sign  = X##_s;				\
+  } while (0)
+
+
+/*
+ * Multiplication algorithms:
+ */
+
+/* Given a 1W * 1W => 2W primitive, do the extended multiplication.  */
+
+#define _FP_MUL_MEAT_2_wide(wfracbits, R, X, Y, doit)			\
+  do {									\
+    _FP_FRAC_DECL_4(_z); _FP_FRAC_DECL_2(_b); _FP_FRAC_DECL_2(_c);	\
+									\
+    doit(_FP_FRAC_WORD_4(_z,1), _FP_FRAC_WORD_4(_z,0), X##_f0, Y##_f0);	\
+    doit(_b_f1, _b_f0, X##_f0, Y##_f1);					\
+    doit(_c_f1, _c_f0, X##_f1, Y##_f0);					\
+    doit(_FP_FRAC_WORD_4(_z,3), _FP_FRAC_WORD_4(_z,2), X##_f1, Y##_f1);	\
+									\
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2),	\
+		    _FP_FRAC_WORD_4(_z,1), 0, _b_f1, _b_f0,		\
+		    _FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2),	\
+		    _FP_FRAC_WORD_4(_z,1));				\
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2),	\
+		    _FP_FRAC_WORD_4(_z,1), 0, _c_f1, _c_f0,		\
+		    _FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2),	\
+		    _FP_FRAC_WORD_4(_z,1));				\
+									\
+    /* Normalize since we know where the msb of the multiplicands	\
+       were (bit B), we know that the msb of the of the product is	\
+       at either 2B or 2B-1.  */					\
+    _FP_FRAC_SRS_4(_z, wfracbits-1, 2*wfracbits);			\
+    R##_f0 = _FP_FRAC_WORD_4(_z,0);					\
+    R##_f1 = _FP_FRAC_WORD_4(_z,1);					\
+  } while (0)
+
+/* Given a 1W * 1W => 2W primitive, do the extended multiplication.
+   Do only 3 multiplications instead of four. This one is for machines
+   where multiplication is much more expensive than subtraction.  */
+
+#define _FP_MUL_MEAT_2_wide_3mul(wfracbits, R, X, Y, doit)		\
+  do {									\
+    _FP_FRAC_DECL_4(_z); _FP_FRAC_DECL_2(_b); _FP_FRAC_DECL_2(_c);	\
+    _FP_W_TYPE _d;							\
+    int _c1, _c2;							\
+									\
+    _b_f0 = X##_f0 + X##_f1;						\
+    _c1 = _b_f0 < X##_f0;						\
+    _b_f1 = Y##_f0 + Y##_f1;						\
+    _c2 = _b_f1 < Y##_f0;						\
+    doit(_d, _FP_FRAC_WORD_4(_z,0), X##_f0, Y##_f0);			\
+    doit(_FP_FRAC_WORD_4(_z,2), _FP_FRAC_WORD_4(_z,1), _b_f0, _b_f1);	\
+    doit(_c_f1, _c_f0, X##_f1, Y##_f1);					\
+									\
+    _b_f0 &= -_c2;							\
+    _b_f1 &= -_c1;							\
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2),	\
+		    _FP_FRAC_WORD_4(_z,1), (_c1 & _c2), 0, _d,		\
+		    0, _FP_FRAC_WORD_4(_z,2), _FP_FRAC_WORD_4(_z,1));	\
+    __FP_FRAC_ADDI_2(_FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2),	\
+		     _b_f0);						\
+    __FP_FRAC_ADDI_2(_FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2),	\
+		     _b_f1);						\
+    __FP_FRAC_DEC_3(_FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2),	\
+		    _FP_FRAC_WORD_4(_z,1),				\
+		    0, _d, _FP_FRAC_WORD_4(_z,0));			\
+    __FP_FRAC_DEC_3(_FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2),	\
+		    _FP_FRAC_WORD_4(_z,1), 0, _c_f1, _c_f0);		\
+    __FP_FRAC_ADD_2(_FP_FRAC_WORD_4(_z,3), _FP_FRAC_WORD_4(_z,2),	\
+		    _c_f1, _c_f0,					\
+		    _FP_FRAC_WORD_4(_z,3), _FP_FRAC_WORD_4(_z,2));	\
+									\
+    /* Normalize since we know where the msb of the multiplicands	\
+       were (bit B), we know that the msb of the of the product is	\
+       at either 2B or 2B-1.  */					\
+    _FP_FRAC_SRS_4(_z, wfracbits-1, 2*wfracbits);			\
+    R##_f0 = _FP_FRAC_WORD_4(_z,0);					\
+    R##_f1 = _FP_FRAC_WORD_4(_z,1);					\
+  } while (0)
+
+#define _FP_MUL_MEAT_2_gmp(wfracbits, R, X, Y)				\
+  do {									\
+    _FP_FRAC_DECL_4(_z);						\
+    _FP_W_TYPE _x[2], _y[2];						\
+    _x[0] = X##_f0; _x[1] = X##_f1;					\
+    _y[0] = Y##_f0; _y[1] = Y##_f1;					\
+									\
+    mpn_mul_n(_z_f, _x, _y, 2);						\
+									\
+    /* Normalize since we know where the msb of the multiplicands	\
+       were (bit B), we know that the msb of the of the product is	\
+       at either 2B or 2B-1.  */					\
+    _FP_FRAC_SRS_4(_z, wfracbits-1, 2*wfracbits);			\
+    R##_f0 = _z_f[0];							\
+    R##_f1 = _z_f[1];							\
+  } while (0)
+
+/* Do at most 120x120=240 bits multiplication using double floating
+   point multiplication.  This is useful if floating point
+   multiplication has much bigger throughput than integer multiply.
+   It is supposed to work for _FP_W_TYPE_SIZE 64 and wfracbits
+   between 106 and 120 only.  
+   Caller guarantees that X and Y has (1LLL << (wfracbits - 1)) set.
+   SETFETZ is a macro which will disable all FPU exceptions and set rounding
+   towards zero,  RESETFE should optionally reset it back.  */
+
+#define _FP_MUL_MEAT_2_120_240_double(wfracbits, R, X, Y, setfetz, resetfe)	\
+  do {										\
+    static const double _const[] = {						\
+      /* 2^-24 */ 5.9604644775390625e-08,					\
+      /* 2^-48 */ 3.5527136788005009e-15,					\
+      /* 2^-72 */ 2.1175823681357508e-22,					\
+      /* 2^-96 */ 1.2621774483536189e-29,					\
+      /* 2^28 */ 2.68435456e+08,						\
+      /* 2^4 */ 1.600000e+01,							\
+      /* 2^-20 */ 9.5367431640625e-07,						\
+      /* 2^-44 */ 5.6843418860808015e-14,					\
+      /* 2^-68 */ 3.3881317890172014e-21,					\
+      /* 2^-92 */ 2.0194839173657902e-28,					\
+      /* 2^-116 */ 1.2037062152420224e-35};					\
+    double _a240, _b240, _c240, _d240, _e240, _f240, 				\
+	   _g240, _h240, _i240, _j240, _k240;					\
+    union { double d; UDItype i; } _l240, _m240, _n240, _o240,			\
+				   _p240, _q240, _r240, _s240;			\
+    UDItype _t240, _u240, _v240, _w240, _x240, _y240 = 0;			\
+										\
+    if (wfracbits < 106 || wfracbits > 120)					\
+      abort();									\
+										\
+    setfetz;									\
+										\
+    _e240 = (double)(long)(X##_f0 & 0xffffff);					\
+    _j240 = (double)(long)(Y##_f0 & 0xffffff);					\
+    _d240 = (double)(long)((X##_f0 >> 24) & 0xffffff);				\
+    _i240 = (double)(long)((Y##_f0 >> 24) & 0xffffff);				\
+    _c240 = (double)(long)(((X##_f1 << 16) & 0xffffff) | (X##_f0 >> 48));	\
+    _h240 = (double)(long)(((Y##_f1 << 16) & 0xffffff) | (Y##_f0 >> 48));	\
+    _b240 = (double)(long)((X##_f1 >> 8) & 0xffffff);				\
+    _g240 = (double)(long)((Y##_f1 >> 8) & 0xffffff);				\
+    _a240 = (double)(long)(X##_f1 >> 32);					\
+    _f240 = (double)(long)(Y##_f1 >> 32);					\
+    _e240 *= _const[3];								\
+    _j240 *= _const[3];								\
+    _d240 *= _const[2];								\
+    _i240 *= _const[2];								\
+    _c240 *= _const[1];								\
+    _h240 *= _const[1];								\
+    _b240 *= _const[0];								\
+    _g240 *= _const[0];								\
+    _s240.d =							      _e240*_j240;\
+    _r240.d =						_d240*_j240 + _e240*_i240;\
+    _q240.d =				  _c240*_j240 + _d240*_i240 + _e240*_h240;\
+    _p240.d =		    _b240*_j240 + _c240*_i240 + _d240*_h240 + _e240*_g240;\
+    _o240.d = _a240*_j240 + _b240*_i240 + _c240*_h240 + _d240*_g240 + _e240*_f240;\
+    _n240.d = _a240*_i240 + _b240*_h240 + _c240*_g240 + _d240*_f240;		\
+    _m240.d = _a240*_h240 + _b240*_g240 + _c240*_f240;				\
+    _l240.d = _a240*_g240 + _b240*_f240;					\
+    _k240 =   _a240*_f240;							\
+    _r240.d += _s240.d;								\
+    _q240.d += _r240.d;								\
+    _p240.d += _q240.d;								\
+    _o240.d += _p240.d;								\
+    _n240.d += _o240.d;								\
+    _m240.d += _n240.d;								\
+    _l240.d += _m240.d;								\
+    _k240 += _l240.d;								\
+    _s240.d -= ((_const[10]+_s240.d)-_const[10]);				\
+    _r240.d -= ((_const[9]+_r240.d)-_const[9]);					\
+    _q240.d -= ((_const[8]+_q240.d)-_const[8]);					\
+    _p240.d -= ((_const[7]+_p240.d)-_const[7]);					\
+    _o240.d += _const[7];							\
+    _n240.d += _const[6];							\
+    _m240.d += _const[5];							\
+    _l240.d += _const[4];							\
+    if (_s240.d != 0.0) _y240 = 1;						\
+    if (_r240.d != 0.0) _y240 = 1;						\
+    if (_q240.d != 0.0) _y240 = 1;						\
+    if (_p240.d != 0.0) _y240 = 1;						\
+    _t240 = (DItype)_k240;							\
+    _u240 = _l240.i;								\
+    _v240 = _m240.i;								\
+    _w240 = _n240.i;								\
+    _x240 = _o240.i;								\
+    R##_f1 = (_t240 << (128 - (wfracbits - 1)))					\
+	     | ((_u240 & 0xffffff) >> ((wfracbits - 1) - 104));			\
+    R##_f0 = ((_u240 & 0xffffff) << (168 - (wfracbits - 1)))			\
+    	     | ((_v240 & 0xffffff) << (144 - (wfracbits - 1)))			\
+    	     | ((_w240 & 0xffffff) << (120 - (wfracbits - 1)))			\
+    	     | ((_x240 & 0xffffff) >> ((wfracbits - 1) - 96))			\
+    	     | _y240;								\
+    resetfe;									\
+  } while (0)
+
+/*
+ * Division algorithms:
+ */
+
+#define _FP_DIV_MEAT_2_udiv(fs, R, X, Y)				\
+  do {									\
+    _FP_W_TYPE _n_f2, _n_f1, _n_f0, _r_f1, _r_f0, _m_f1, _m_f0;		\
+    if (_FP_FRAC_GT_2(X, Y))						\
+      {									\
+	_n_f2 = X##_f1 >> 1;						\
+	_n_f1 = X##_f1 << (_FP_W_TYPE_SIZE - 1) | X##_f0 >> 1;		\
+	_n_f0 = X##_f0 << (_FP_W_TYPE_SIZE - 1);			\
+      }									\
+    else								\
+      {									\
+	R##_e--;							\
+	_n_f2 = X##_f1;							\
+	_n_f1 = X##_f0;							\
+	_n_f0 = 0;							\
+      }									\
+									\
+    /* Normalize, i.e. make the most significant bit of the 		\
+       denominator set. */						\
+    _FP_FRAC_SLL_2(Y, _FP_WFRACXBITS_##fs);				\
+									\
+    udiv_qrnnd(R##_f1, _r_f1, _n_f2, _n_f1, Y##_f1);			\
+    umul_ppmm(_m_f1, _m_f0, R##_f1, Y##_f0);				\
+    _r_f0 = _n_f0;							\
+    if (_FP_FRAC_GT_2(_m, _r))						\
+      {									\
+	R##_f1--;							\
+	_FP_FRAC_ADD_2(_r, Y, _r);					\
+	if (_FP_FRAC_GE_2(_r, Y) && _FP_FRAC_GT_2(_m, _r))		\
+	  {								\
+	    R##_f1--;							\
+	    _FP_FRAC_ADD_2(_r, Y, _r);					\
+	  }								\
+      }									\
+    _FP_FRAC_DEC_2(_r, _m);						\
+									\
+    if (_r_f1 == Y##_f1)						\
+      {									\
+	/* This is a special case, not an optimization			\
+	   (_r/Y##_f1 would not fit into UWtype).			\
+	   As _r is guaranteed to be < Y,  R##_f0 can be either		\
+	   (UWtype)-1 or (UWtype)-2.  But as we know what kind		\
+	   of bits it is (sticky, guard, round),  we don't care.	\
+	   We also don't care what the reminder is,  because the	\
+	   guard bit will be set anyway.  -jj */			\
+	R##_f0 = -1;							\
+      }									\
+    else								\
+      {									\
+	udiv_qrnnd(R##_f0, _r_f1, _r_f1, _r_f0, Y##_f1);		\
+	umul_ppmm(_m_f1, _m_f0, R##_f0, Y##_f0);			\
+	_r_f0 = 0;							\
+	if (_FP_FRAC_GT_2(_m, _r))					\
+	  {								\
+	    R##_f0--;							\
+	    _FP_FRAC_ADD_2(_r, Y, _r);					\
+	    if (_FP_FRAC_GE_2(_r, Y) && _FP_FRAC_GT_2(_m, _r))		\
+	      {								\
+		R##_f0--;						\
+		_FP_FRAC_ADD_2(_r, Y, _r);				\
+	      }								\
+	  }								\
+	if (!_FP_FRAC_EQ_2(_r, _m))					\
+	  R##_f0 |= _FP_WORK_STICKY;					\
+      }									\
+  } while (0)
+
+
+#define _FP_DIV_MEAT_2_gmp(fs, R, X, Y)					\
+  do {									\
+    _FP_W_TYPE _x[4], _y[2], _z[4];					\
+    _y[0] = Y##_f0; _y[1] = Y##_f1;					\
+    _x[0] = _x[3] = 0;							\
+    if (_FP_FRAC_GT_2(X, Y))						\
+      {									\
+	R##_e++;							\
+	_x[1] = (X##_f0 << (_FP_WFRACBITS_##fs-1 - _FP_W_TYPE_SIZE) |	\
+		 X##_f1 >> (_FP_W_TYPE_SIZE -				\
+			    (_FP_WFRACBITS_##fs-1 - _FP_W_TYPE_SIZE)));	\
+	_x[2] = X##_f1 << (_FP_WFRACBITS_##fs-1 - _FP_W_TYPE_SIZE);	\
+      }									\
+    else								\
+      {									\
+	_x[1] = (X##_f0 << (_FP_WFRACBITS_##fs - _FP_W_TYPE_SIZE) |	\
+		 X##_f1 >> (_FP_W_TYPE_SIZE -				\
+			    (_FP_WFRACBITS_##fs - _FP_W_TYPE_SIZE)));	\
+	_x[2] = X##_f1 << (_FP_WFRACBITS_##fs - _FP_W_TYPE_SIZE);	\
+      }									\
+									\
+    (void) mpn_divrem (_z, 0, _x, 4, _y, 2);				\
+    R##_f1 = _z[1];							\
+    R##_f0 = _z[0] | ((_x[0] | _x[1]) != 0);				\
+  } while (0)
+
+
+/*
+ * Square root algorithms:
+ * We have just one right now, maybe Newton approximation
+ * should be added for those machines where division is fast.
+ */
+ 
+#define _FP_SQRT_MEAT_2(R, S, T, X, q)			\
+  do {							\
+    while (q)						\
+      {							\
+	T##_f1 = S##_f1 + q;				\
+	if (T##_f1 <= X##_f1)				\
+	  {						\
+	    S##_f1 = T##_f1 + q;			\
+	    X##_f1 -= T##_f1;				\
+	    R##_f1 += q;				\
+	  }						\
+	_FP_FRAC_SLL_2(X, 1);				\
+	q >>= 1;					\
+      }							\
+    q = (_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE - 1);		\
+    while (q != _FP_WORK_ROUND)				\
+      {							\
+	T##_f0 = S##_f0 + q;				\
+	T##_f1 = S##_f1;				\
+	if (T##_f1 < X##_f1 || 				\
+	    (T##_f1 == X##_f1 && T##_f0 <= X##_f0))	\
+	  {						\
+	    S##_f0 = T##_f0 + q;			\
+	    S##_f1 += (T##_f0 > S##_f0);		\
+	    _FP_FRAC_DEC_2(X, T);			\
+	    R##_f0 += q;				\
+	  }						\
+	_FP_FRAC_SLL_2(X, 1);				\
+	q >>= 1;					\
+      }							\
+    if (X##_f0 | X##_f1)				\
+      {							\
+	if (S##_f1 < X##_f1 || 				\
+	    (S##_f1 == X##_f1 && S##_f0 < X##_f0))	\
+	  R##_f0 |= _FP_WORK_ROUND;			\
+	R##_f0 |= _FP_WORK_STICKY;			\
+      }							\
+  } while (0)
+
+
+/*
+ * Assembly/disassembly for converting to/from integral types.  
+ * No shifting or overflow handled here.
+ */
+
+#define _FP_FRAC_ASSEMBLE_2(r, X, rsize)	\
+  do {						\
+    if (rsize <= _FP_W_TYPE_SIZE)		\
+      r = X##_f0;				\
+    else					\
+      {						\
+	r = X##_f1;				\
+	r <<= _FP_W_TYPE_SIZE;			\
+	r += X##_f0;				\
+      }						\
+  } while (0)
+
+#define _FP_FRAC_DISASSEMBLE_2(X, r, rsize)				\
+  do {									\
+    X##_f0 = r;								\
+    X##_f1 = (rsize <= _FP_W_TYPE_SIZE ? 0 : r >> _FP_W_TYPE_SIZE);	\
+  } while (0)
+
+/*
+ * Convert FP values between word sizes
+ */
+
+#define _FP_FRAC_CONV_1_2(dfs, sfs, D, S)				\
+  do {									\
+    if (S##_c != FP_CLS_NAN)						\
+      _FP_FRAC_SRS_2(S, (_FP_WFRACBITS_##sfs - _FP_WFRACBITS_##dfs),	\
+		     _FP_WFRACBITS_##sfs);				\
+    else								\
+      _FP_FRAC_SRL_2(S, (_FP_WFRACBITS_##sfs - _FP_WFRACBITS_##dfs));	\
+    D##_f = S##_f0;							\
+  } while (0)
+
+#define _FP_FRAC_CONV_2_1(dfs, sfs, D, S)				\
+  do {									\
+    D##_f0 = S##_f;							\
+    D##_f1 = 0;								\
+    _FP_FRAC_SLL_2(D, (_FP_WFRACBITS_##dfs - _FP_WFRACBITS_##sfs));	\
+  } while (0)
+
+#endif
diff --git a/include/math-emu/op-4.h b/include/math-emu/op-4.h
new file mode 100644
index 00000000..ba226f82
--- /dev/null
+++ b/include/math-emu/op-4.h
@@ -0,0 +1,692 @@
+/* Software floating-point emulation.
+   Basic four-word fraction declaration and manipulation.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz),
+		  David S. Miller (davem@redhat.com) and
+		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef __MATH_EMU_OP_4_H__
+#define __MATH_EMU_OP_4_H__
+
+#define _FP_FRAC_DECL_4(X)	_FP_W_TYPE X##_f[4]
+#define _FP_FRAC_COPY_4(D,S)			\
+  (D##_f[0] = S##_f[0], D##_f[1] = S##_f[1],	\
+   D##_f[2] = S##_f[2], D##_f[3] = S##_f[3])
+#define _FP_FRAC_SET_4(X,I)	__FP_FRAC_SET_4(X, I)
+#define _FP_FRAC_HIGH_4(X)	(X##_f[3])
+#define _FP_FRAC_LOW_4(X)	(X##_f[0])
+#define _FP_FRAC_WORD_4(X,w)	(X##_f[w])
+
+#define _FP_FRAC_SLL_4(X,N)						\
+  do {									\
+    _FP_I_TYPE _up, _down, _skip, _i;					\
+    _skip = (N) / _FP_W_TYPE_SIZE;					\
+    _up = (N) % _FP_W_TYPE_SIZE;					\
+    _down = _FP_W_TYPE_SIZE - _up;					\
+    if (!_up)								\
+      for (_i = 3; _i >= _skip; --_i)					\
+	X##_f[_i] = X##_f[_i-_skip];					\
+    else								\
+      {									\
+	for (_i = 3; _i > _skip; --_i)					\
+	  X##_f[_i] = X##_f[_i-_skip] << _up				\
+		      | X##_f[_i-_skip-1] >> _down;			\
+	X##_f[_i--] = X##_f[0] << _up; 					\
+      }									\
+    for (; _i >= 0; --_i)						\
+      X##_f[_i] = 0;							\
+  } while (0)
+
+/* This one was broken too */
+#define _FP_FRAC_SRL_4(X,N)						\
+  do {									\
+    _FP_I_TYPE _up, _down, _skip, _i;					\
+    _skip = (N) / _FP_W_TYPE_SIZE;					\
+    _down = (N) % _FP_W_TYPE_SIZE;					\
+    _up = _FP_W_TYPE_SIZE - _down;					\
+    if (!_down)								\
+      for (_i = 0; _i <= 3-_skip; ++_i)					\
+	X##_f[_i] = X##_f[_i+_skip];					\
+    else								\
+      {									\
+	for (_i = 0; _i < 3-_skip; ++_i)				\
+	  X##_f[_i] = X##_f[_i+_skip] >> _down				\
+		      | X##_f[_i+_skip+1] << _up;			\
+	X##_f[_i++] = X##_f[3] >> _down;				\
+      }									\
+    for (; _i < 4; ++_i)						\
+      X##_f[_i] = 0;							\
+  } while (0)
+
+
+/* Right shift with sticky-lsb. 
+ * What this actually means is that we do a standard right-shift,
+ * but that if any of the bits that fall off the right hand side
+ * were one then we always set the LSbit.
+ */
+#define _FP_FRAC_SRS_4(X,N,size)					\
+  do {									\
+    _FP_I_TYPE _up, _down, _skip, _i;					\
+    _FP_W_TYPE _s;							\
+    _skip = (N) / _FP_W_TYPE_SIZE;					\
+    _down = (N) % _FP_W_TYPE_SIZE;					\
+    _up = _FP_W_TYPE_SIZE - _down;					\
+    for (_s = _i = 0; _i < _skip; ++_i)					\
+      _s |= X##_f[_i];							\
+    _s |= X##_f[_i] << _up;						\
+/* s is now != 0 if we want to set the LSbit */				\
+    if (!_down)								\
+      for (_i = 0; _i <= 3-_skip; ++_i)					\
+	X##_f[_i] = X##_f[_i+_skip];					\
+    else								\
+      {									\
+	for (_i = 0; _i < 3-_skip; ++_i)				\
+	  X##_f[_i] = X##_f[_i+_skip] >> _down				\
+		      | X##_f[_i+_skip+1] << _up;			\
+	X##_f[_i++] = X##_f[3] >> _down;				\
+      }									\
+    for (; _i < 4; ++_i)						\
+      X##_f[_i] = 0;							\
+    /* don't fix the LSB until the very end when we're sure f[0] is stable */	\
+    X##_f[0] |= (_s != 0);						\
+  } while (0)
+
+#define _FP_FRAC_ADD_4(R,X,Y)						\
+  __FP_FRAC_ADD_4(R##_f[3], R##_f[2], R##_f[1], R##_f[0],		\
+		  X##_f[3], X##_f[2], X##_f[1], X##_f[0],		\
+		  Y##_f[3], Y##_f[2], Y##_f[1], Y##_f[0])
+
+#define _FP_FRAC_SUB_4(R,X,Y)						\
+  __FP_FRAC_SUB_4(R##_f[3], R##_f[2], R##_f[1], R##_f[0],		\
+		  X##_f[3], X##_f[2], X##_f[1], X##_f[0],		\
+		  Y##_f[3], Y##_f[2], Y##_f[1], Y##_f[0])
+
+#define _FP_FRAC_DEC_4(X,Y)						\
+  __FP_FRAC_DEC_4(X##_f[3], X##_f[2], X##_f[1], X##_f[0],		\
+		  Y##_f[3], Y##_f[2], Y##_f[1], Y##_f[0])
+
+#define _FP_FRAC_ADDI_4(X,I)						\
+  __FP_FRAC_ADDI_4(X##_f[3], X##_f[2], X##_f[1], X##_f[0], I)
+
+#define _FP_ZEROFRAC_4  0,0,0,0
+#define _FP_MINFRAC_4   0,0,0,1
+#define _FP_MAXFRAC_4	(~(_FP_WS_TYPE)0), (~(_FP_WS_TYPE)0), (~(_FP_WS_TYPE)0), (~(_FP_WS_TYPE)0)
+
+#define _FP_FRAC_ZEROP_4(X)     ((X##_f[0] | X##_f[1] | X##_f[2] | X##_f[3]) == 0)
+#define _FP_FRAC_NEGP_4(X)      ((_FP_WS_TYPE)X##_f[3] < 0)
+#define _FP_FRAC_OVERP_4(fs,X)  (_FP_FRAC_HIGH_##fs(X) & _FP_OVERFLOW_##fs)
+#define _FP_FRAC_CLEAR_OVERP_4(fs,X)  (_FP_FRAC_HIGH_##fs(X) &= ~_FP_OVERFLOW_##fs)
+
+#define _FP_FRAC_EQ_4(X,Y)				\
+ (X##_f[0] == Y##_f[0] && X##_f[1] == Y##_f[1]		\
+  && X##_f[2] == Y##_f[2] && X##_f[3] == Y##_f[3])
+
+#define _FP_FRAC_GT_4(X,Y)				\
+ (X##_f[3] > Y##_f[3] ||				\
+  (X##_f[3] == Y##_f[3] && (X##_f[2] > Y##_f[2] ||	\
+   (X##_f[2] == Y##_f[2] && (X##_f[1] > Y##_f[1] ||	\
+    (X##_f[1] == Y##_f[1] && X##_f[0] > Y##_f[0])	\
+   ))							\
+  ))							\
+ )
+
+#define _FP_FRAC_GE_4(X,Y)				\
+ (X##_f[3] > Y##_f[3] ||				\
+  (X##_f[3] == Y##_f[3] && (X##_f[2] > Y##_f[2] ||	\
+   (X##_f[2] == Y##_f[2] && (X##_f[1] > Y##_f[1] ||	\
+    (X##_f[1] == Y##_f[1] && X##_f[0] >= Y##_f[0])	\
+   ))							\
+  ))							\
+ )
+
+
+#define _FP_FRAC_CLZ_4(R,X)		\
+  do {					\
+    if (X##_f[3])			\
+    {					\
+	__FP_CLZ(R,X##_f[3]);		\
+    }					\
+    else if (X##_f[2])			\
+    {					\
+	__FP_CLZ(R,X##_f[2]);		\
+	R += _FP_W_TYPE_SIZE;		\
+    }					\
+    else if (X##_f[1])			\
+    {					\
+	__FP_CLZ(R,X##_f[2]);		\
+	R += _FP_W_TYPE_SIZE*2;		\
+    }					\
+    else				\
+    {					\
+	__FP_CLZ(R,X##_f[0]);		\
+	R += _FP_W_TYPE_SIZE*3;		\
+    }					\
+  } while(0)
+
+
+#define _FP_UNPACK_RAW_4(fs, X, val)				\
+  do {								\
+    union _FP_UNION_##fs _flo; _flo.flt = (val);		\
+    X##_f[0] = _flo.bits.frac0;					\
+    X##_f[1] = _flo.bits.frac1;					\
+    X##_f[2] = _flo.bits.frac2;					\
+    X##_f[3] = _flo.bits.frac3;					\
+    X##_e  = _flo.bits.exp;					\
+    X##_s  = _flo.bits.sign;					\
+  } while (0)
+
+#define _FP_UNPACK_RAW_4_P(fs, X, val)				\
+  do {								\
+    union _FP_UNION_##fs *_flo =				\
+      (union _FP_UNION_##fs *)(val);				\
+								\
+    X##_f[0] = _flo->bits.frac0;				\
+    X##_f[1] = _flo->bits.frac1;				\
+    X##_f[2] = _flo->bits.frac2;				\
+    X##_f[3] = _flo->bits.frac3;				\
+    X##_e  = _flo->bits.exp;					\
+    X##_s  = _flo->bits.sign;					\
+  } while (0)
+
+#define _FP_PACK_RAW_4(fs, val, X)				\
+  do {								\
+    union _FP_UNION_##fs _flo;					\
+    _flo.bits.frac0 = X##_f[0];					\
+    _flo.bits.frac1 = X##_f[1];					\
+    _flo.bits.frac2 = X##_f[2];					\
+    _flo.bits.frac3 = X##_f[3];					\
+    _flo.bits.exp   = X##_e;					\
+    _flo.bits.sign  = X##_s;					\
+    (val) = _flo.flt;				   		\
+  } while (0)
+
+#define _FP_PACK_RAW_4_P(fs, val, X)				\
+  do {								\
+    union _FP_UNION_##fs *_flo =				\
+      (union _FP_UNION_##fs *)(val);				\
+								\
+    _flo->bits.frac0 = X##_f[0];				\
+    _flo->bits.frac1 = X##_f[1];				\
+    _flo->bits.frac2 = X##_f[2];				\
+    _flo->bits.frac3 = X##_f[3];				\
+    _flo->bits.exp   = X##_e;					\
+    _flo->bits.sign  = X##_s;					\
+  } while (0)
+
+/*
+ * Multiplication algorithms:
+ */
+
+/* Given a 1W * 1W => 2W primitive, do the extended multiplication.  */
+
+#define _FP_MUL_MEAT_4_wide(wfracbits, R, X, Y, doit)			    \
+  do {									    \
+    _FP_FRAC_DECL_8(_z); _FP_FRAC_DECL_2(_b); _FP_FRAC_DECL_2(_c);	    \
+    _FP_FRAC_DECL_2(_d); _FP_FRAC_DECL_2(_e); _FP_FRAC_DECL_2(_f);	    \
+									    \
+    doit(_FP_FRAC_WORD_8(_z,1), _FP_FRAC_WORD_8(_z,0), X##_f[0], Y##_f[0]); \
+    doit(_b_f1, _b_f0, X##_f[0], Y##_f[1]);				    \
+    doit(_c_f1, _c_f0, X##_f[1], Y##_f[0]);				    \
+    doit(_d_f1, _d_f0, X##_f[1], Y##_f[1]);				    \
+    doit(_e_f1, _e_f0, X##_f[0], Y##_f[2]);				    \
+    doit(_f_f1, _f_f0, X##_f[2], Y##_f[0]);				    \
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_8(_z,3),_FP_FRAC_WORD_8(_z,2),	    \
+		    _FP_FRAC_WORD_8(_z,1), 0,_b_f1,_b_f0,		    \
+		    0,0,_FP_FRAC_WORD_8(_z,1));				    \
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_8(_z,3),_FP_FRAC_WORD_8(_z,2),	    \
+		    _FP_FRAC_WORD_8(_z,1), 0,_c_f1,_c_f0,		    \
+		    _FP_FRAC_WORD_8(_z,3),_FP_FRAC_WORD_8(_z,2),	    \
+		    _FP_FRAC_WORD_8(_z,1));				    \
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_8(_z,4),_FP_FRAC_WORD_8(_z,3),	    \
+		    _FP_FRAC_WORD_8(_z,2), 0,_d_f1,_d_f0,		    \
+		    0,_FP_FRAC_WORD_8(_z,3),_FP_FRAC_WORD_8(_z,2));	    \
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_8(_z,4),_FP_FRAC_WORD_8(_z,3),	    \
+		    _FP_FRAC_WORD_8(_z,2), 0,_e_f1,_e_f0,		    \
+		    _FP_FRAC_WORD_8(_z,4),_FP_FRAC_WORD_8(_z,3),	    \
+		    _FP_FRAC_WORD_8(_z,2));				    \
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_8(_z,4),_FP_FRAC_WORD_8(_z,3),	    \
+		    _FP_FRAC_WORD_8(_z,2), 0,_f_f1,_f_f0,		    \
+		    _FP_FRAC_WORD_8(_z,4),_FP_FRAC_WORD_8(_z,3),	    \
+		    _FP_FRAC_WORD_8(_z,2));				    \
+    doit(_b_f1, _b_f0, X##_f[0], Y##_f[3]);				    \
+    doit(_c_f1, _c_f0, X##_f[3], Y##_f[0]);				    \
+    doit(_d_f1, _d_f0, X##_f[1], Y##_f[2]);				    \
+    doit(_e_f1, _e_f0, X##_f[2], Y##_f[1]);				    \
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_8(_z,5),_FP_FRAC_WORD_8(_z,4),	    \
+		    _FP_FRAC_WORD_8(_z,3), 0,_b_f1,_b_f0,		    \
+		    0,_FP_FRAC_WORD_8(_z,4),_FP_FRAC_WORD_8(_z,3));	    \
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_8(_z,5),_FP_FRAC_WORD_8(_z,4),	    \
+		    _FP_FRAC_WORD_8(_z,3), 0,_c_f1,_c_f0,		    \
+		    _FP_FRAC_WORD_8(_z,5),_FP_FRAC_WORD_8(_z,4),	    \
+		    _FP_FRAC_WORD_8(_z,3));				    \
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_8(_z,5),_FP_FRAC_WORD_8(_z,4),	    \
+		    _FP_FRAC_WORD_8(_z,3), 0,_d_f1,_d_f0,		    \
+		    _FP_FRAC_WORD_8(_z,5),_FP_FRAC_WORD_8(_z,4),	    \
+		    _FP_FRAC_WORD_8(_z,3));				    \
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_8(_z,5),_FP_FRAC_WORD_8(_z,4),	    \
+		    _FP_FRAC_WORD_8(_z,3), 0,_e_f1,_e_f0,		    \
+		    _FP_FRAC_WORD_8(_z,5),_FP_FRAC_WORD_8(_z,4),	    \
+		    _FP_FRAC_WORD_8(_z,3));				    \
+    doit(_b_f1, _b_f0, X##_f[2], Y##_f[2]);				    \
+    doit(_c_f1, _c_f0, X##_f[1], Y##_f[3]);				    \
+    doit(_d_f1, _d_f0, X##_f[3], Y##_f[1]);				    \
+    doit(_e_f1, _e_f0, X##_f[2], Y##_f[3]);				    \
+    doit(_f_f1, _f_f0, X##_f[3], Y##_f[2]);				    \
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_8(_z,6),_FP_FRAC_WORD_8(_z,5),	    \
+		    _FP_FRAC_WORD_8(_z,4), 0,_b_f1,_b_f0,		    \
+		    0,_FP_FRAC_WORD_8(_z,5),_FP_FRAC_WORD_8(_z,4));	    \
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_8(_z,6),_FP_FRAC_WORD_8(_z,5),	    \
+		    _FP_FRAC_WORD_8(_z,4), 0,_c_f1,_c_f0,		    \
+		    _FP_FRAC_WORD_8(_z,6),_FP_FRAC_WORD_8(_z,5),	    \
+		    _FP_FRAC_WORD_8(_z,4));				    \
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_8(_z,6),_FP_FRAC_WORD_8(_z,5),	    \
+		    _FP_FRAC_WORD_8(_z,4), 0,_d_f1,_d_f0,		    \
+		    _FP_FRAC_WORD_8(_z,6),_FP_FRAC_WORD_8(_z,5),	    \
+		    _FP_FRAC_WORD_8(_z,4));				    \
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_8(_z,7),_FP_FRAC_WORD_8(_z,6),	    \
+		    _FP_FRAC_WORD_8(_z,5), 0,_e_f1,_e_f0,		    \
+		    0,_FP_FRAC_WORD_8(_z,6),_FP_FRAC_WORD_8(_z,5));	    \
+    __FP_FRAC_ADD_3(_FP_FRAC_WORD_8(_z,7),_FP_FRAC_WORD_8(_z,6),	    \
+		    _FP_FRAC_WORD_8(_z,5), 0,_f_f1,_f_f0,		    \
+		    _FP_FRAC_WORD_8(_z,7),_FP_FRAC_WORD_8(_z,6),	    \
+		    _FP_FRAC_WORD_8(_z,5));				    \
+    doit(_b_f1, _b_f0, X##_f[3], Y##_f[3]);				    \
+    __FP_FRAC_ADD_2(_FP_FRAC_WORD_8(_z,7),_FP_FRAC_WORD_8(_z,6),	    \
+		    _b_f1,_b_f0,					    \
+		    _FP_FRAC_WORD_8(_z,7),_FP_FRAC_WORD_8(_z,6));	    \
+									    \
+    /* Normalize since we know where the msb of the multiplicands	    \
+       were (bit B), we know that the msb of the of the product is	    \
+       at either 2B or 2B-1.  */					    \
+    _FP_FRAC_SRS_8(_z, wfracbits-1, 2*wfracbits);			    \
+    __FP_FRAC_SET_4(R, _FP_FRAC_WORD_8(_z,3), _FP_FRAC_WORD_8(_z,2),	    \
+		    _FP_FRAC_WORD_8(_z,1), _FP_FRAC_WORD_8(_z,0));	    \
+  } while (0)
+
+#define _FP_MUL_MEAT_4_gmp(wfracbits, R, X, Y)				    \
+  do {									    \
+    _FP_FRAC_DECL_8(_z);						    \
+									    \
+    mpn_mul_n(_z_f, _x_f, _y_f, 4);					    \
+									    \
+    /* Normalize since we know where the msb of the multiplicands	    \
+       were (bit B), we know that the msb of the of the product is	    \
+       at either 2B or 2B-1.  */					    \
+    _FP_FRAC_SRS_8(_z, wfracbits-1, 2*wfracbits);	 		    \
+    __FP_FRAC_SET_4(R, _FP_FRAC_WORD_8(_z,3), _FP_FRAC_WORD_8(_z,2),	    \
+		    _FP_FRAC_WORD_8(_z,1), _FP_FRAC_WORD_8(_z,0));	    \
+  } while (0)
+
+/*
+ * Helper utility for _FP_DIV_MEAT_4_udiv:
+ * pppp = m * nnn
+ */
+#define umul_ppppmnnn(p3,p2,p1,p0,m,n2,n1,n0)				    \
+  do {									    \
+    UWtype _t;								    \
+    umul_ppmm(p1,p0,m,n0);						    \
+    umul_ppmm(p2,_t,m,n1);						    \
+    __FP_FRAC_ADDI_2(p2,p1,_t);						    \
+    umul_ppmm(p3,_t,m,n2);						    \
+    __FP_FRAC_ADDI_2(p3,p2,_t);						    \
+  } while (0)
+
+/*
+ * Division algorithms:
+ */
+
+#define _FP_DIV_MEAT_4_udiv(fs, R, X, Y)				    \
+  do {									    \
+    int _i;								    \
+    _FP_FRAC_DECL_4(_n); _FP_FRAC_DECL_4(_m);				    \
+    _FP_FRAC_SET_4(_n, _FP_ZEROFRAC_4);					    \
+    if (_FP_FRAC_GT_4(X, Y))						    \
+      {									    \
+	_n_f[3] = X##_f[0] << (_FP_W_TYPE_SIZE - 1);			    \
+	_FP_FRAC_SRL_4(X, 1);						    \
+      }									    \
+    else								    \
+      R##_e--;								    \
+									    \
+    /* Normalize, i.e. make the most significant bit of the 		    \
+       denominator set. */						    \
+    _FP_FRAC_SLL_4(Y, _FP_WFRACXBITS_##fs);				    \
+									    \
+    for (_i = 3; ; _i--)						    \
+      {									    \
+        if (X##_f[3] == Y##_f[3])					    \
+          {								    \
+            /* This is a special case, not an optimization		    \
+               (X##_f[3]/Y##_f[3] would not fit into UWtype).		    \
+               As X## is guaranteed to be < Y,  R##_f[_i] can be either	    \
+               (UWtype)-1 or (UWtype)-2.  */				    \
+            R##_f[_i] = -1;						    \
+            if (!_i)							    \
+	      break;							    \
+            __FP_FRAC_SUB_4(X##_f[3], X##_f[2], X##_f[1], X##_f[0],	    \
+			    Y##_f[2], Y##_f[1], Y##_f[0], 0,		    \
+			    X##_f[2], X##_f[1], X##_f[0], _n_f[_i]);	    \
+            _FP_FRAC_SUB_4(X, Y, X);					    \
+            if (X##_f[3] > Y##_f[3])					    \
+              {								    \
+                R##_f[_i] = -2;						    \
+                _FP_FRAC_ADD_4(X, Y, X);				    \
+              }								    \
+          }								    \
+        else								    \
+          {								    \
+            udiv_qrnnd(R##_f[_i], X##_f[3], X##_f[3], X##_f[2], Y##_f[3]);  \
+            umul_ppppmnnn(_m_f[3], _m_f[2], _m_f[1], _m_f[0],		    \
+			  R##_f[_i], Y##_f[2], Y##_f[1], Y##_f[0]);	    \
+            X##_f[2] = X##_f[1];					    \
+            X##_f[1] = X##_f[0];					    \
+            X##_f[0] = _n_f[_i];					    \
+            if (_FP_FRAC_GT_4(_m, X))					    \
+              {								    \
+                R##_f[_i]--;						    \
+                _FP_FRAC_ADD_4(X, Y, X);				    \
+                if (_FP_FRAC_GE_4(X, Y) && _FP_FRAC_GT_4(_m, X))	    \
+                  {							    \
+		    R##_f[_i]--;					    \
+		    _FP_FRAC_ADD_4(X, Y, X);				    \
+                  }							    \
+              }								    \
+            _FP_FRAC_DEC_4(X, _m);					    \
+            if (!_i)							    \
+	      {								    \
+		if (!_FP_FRAC_EQ_4(X, _m))				    \
+		  R##_f[0] |= _FP_WORK_STICKY;				    \
+		break;							    \
+	      }								    \
+          }								    \
+      }									    \
+  } while (0)
+
+
+/*
+ * Square root algorithms:
+ * We have just one right now, maybe Newton approximation
+ * should be added for those machines where division is fast.
+ */
+ 
+#define _FP_SQRT_MEAT_4(R, S, T, X, q)				\
+  do {								\
+    while (q)							\
+      {								\
+	T##_f[3] = S##_f[3] + q;				\
+	if (T##_f[3] <= X##_f[3])				\
+	  {							\
+	    S##_f[3] = T##_f[3] + q;				\
+	    X##_f[3] -= T##_f[3];				\
+	    R##_f[3] += q;					\
+	  }							\
+	_FP_FRAC_SLL_4(X, 1);					\
+	q >>= 1;						\
+      }								\
+    q = (_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE - 1);			\
+    while (q)							\
+      {								\
+	T##_f[2] = S##_f[2] + q;				\
+	T##_f[3] = S##_f[3];					\
+	if (T##_f[3] < X##_f[3] || 				\
+	    (T##_f[3] == X##_f[3] && T##_f[2] <= X##_f[2]))	\
+	  {							\
+	    S##_f[2] = T##_f[2] + q;				\
+	    S##_f[3] += (T##_f[2] > S##_f[2]);			\
+	    __FP_FRAC_DEC_2(X##_f[3], X##_f[2],			\
+			    T##_f[3], T##_f[2]);		\
+	    R##_f[2] += q;					\
+	  }							\
+	_FP_FRAC_SLL_4(X, 1);					\
+	q >>= 1;						\
+      }								\
+    q = (_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE - 1);			\
+    while (q)							\
+      {								\
+	T##_f[1] = S##_f[1] + q;				\
+	T##_f[2] = S##_f[2];					\
+	T##_f[3] = S##_f[3];					\
+	if (T##_f[3] < X##_f[3] || 				\
+	    (T##_f[3] == X##_f[3] && (T##_f[2] < X##_f[2] ||	\
+	     (T##_f[2] == X##_f[2] && T##_f[1] <= X##_f[1]))))	\
+	  {							\
+	    S##_f[1] = T##_f[1] + q;				\
+	    S##_f[2] += (T##_f[1] > S##_f[1]);			\
+	    S##_f[3] += (T##_f[2] > S##_f[2]);			\
+	    __FP_FRAC_DEC_3(X##_f[3], X##_f[2], X##_f[1],	\
+	    		    T##_f[3], T##_f[2], T##_f[1]);	\
+	    R##_f[1] += q;					\
+	  }							\
+	_FP_FRAC_SLL_4(X, 1);					\
+	q >>= 1;						\
+      }								\
+    q = (_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE - 1);			\
+    while (q != _FP_WORK_ROUND)					\
+      {								\
+	T##_f[0] = S##_f[0] + q;				\
+	T##_f[1] = S##_f[1];					\
+	T##_f[2] = S##_f[2];					\
+	T##_f[3] = S##_f[3];					\
+	if (_FP_FRAC_GE_4(X,T))					\
+	  {							\
+	    S##_f[0] = T##_f[0] + q;				\
+	    S##_f[1] += (T##_f[0] > S##_f[0]);			\
+	    S##_f[2] += (T##_f[1] > S##_f[1]);			\
+	    S##_f[3] += (T##_f[2] > S##_f[2]);			\
+	    _FP_FRAC_DEC_4(X, T);				\
+	    R##_f[0] += q;					\
+	  }							\
+	_FP_FRAC_SLL_4(X, 1);					\
+	q >>= 1;						\
+      }								\
+    if (!_FP_FRAC_ZEROP_4(X))					\
+      {								\
+	if (_FP_FRAC_GT_4(X,S))					\
+	  R##_f[0] |= _FP_WORK_ROUND;				\
+	R##_f[0] |= _FP_WORK_STICKY;				\
+      }								\
+  } while (0)
+
+
+/*
+ * Internals 
+ */
+
+#define __FP_FRAC_SET_4(X,I3,I2,I1,I0)					\
+  (X##_f[3] = I3, X##_f[2] = I2, X##_f[1] = I1, X##_f[0] = I0)
+
+#ifndef __FP_FRAC_ADD_3
+#define __FP_FRAC_ADD_3(r2,r1,r0,x2,x1,x0,y2,y1,y0)		\
+  do {								\
+    int _c1, _c2;							\
+    r0 = x0 + y0;						\
+    _c1 = r0 < x0;						\
+    r1 = x1 + y1;						\
+    _c2 = r1 < x1;						\
+    r1 += _c1;							\
+    _c2 |= r1 < _c1;						\
+    r2 = x2 + y2 + _c2;						\
+  } while (0)
+#endif
+
+#ifndef __FP_FRAC_ADD_4
+#define __FP_FRAC_ADD_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0)	\
+  do {								\
+    int _c1, _c2, _c3;						\
+    r0 = x0 + y0;						\
+    _c1 = r0 < x0;						\
+    r1 = x1 + y1;						\
+    _c2 = r1 < x1;						\
+    r1 += _c1;							\
+    _c2 |= r1 < _c1;						\
+    r2 = x2 + y2;						\
+    _c3 = r2 < x2;						\
+    r2 += _c2;							\
+    _c3 |= r2 < _c2;						\
+    r3 = x3 + y3 + _c3;						\
+  } while (0)
+#endif
+
+#ifndef __FP_FRAC_SUB_3
+#define __FP_FRAC_SUB_3(r2,r1,r0,x2,x1,x0,y2,y1,y0)		\
+  do {								\
+    int _c1, _c2;							\
+    r0 = x0 - y0;						\
+    _c1 = r0 > x0;						\
+    r1 = x1 - y1;						\
+    _c2 = r1 > x1;						\
+    r1 -= _c1;							\
+    _c2 |= r1 > _c1;						\
+    r2 = x2 - y2 - _c2;						\
+  } while (0)
+#endif
+
+#ifndef __FP_FRAC_SUB_4
+#define __FP_FRAC_SUB_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0)	\
+  do {								\
+    int _c1, _c2, _c3;						\
+    r0 = x0 - y0;						\
+    _c1 = r0 > x0;						\
+    r1 = x1 - y1;						\
+    _c2 = r1 > x1;						\
+    r1 -= _c1;							\
+    _c2 |= r1 > _c1;						\
+    r2 = x2 - y2;						\
+    _c3 = r2 > x2;						\
+    r2 -= _c2;							\
+    _c3 |= r2 > _c2;						\
+    r3 = x3 - y3 - _c3;						\
+  } while (0)
+#endif
+
+#ifndef __FP_FRAC_DEC_3
+#define __FP_FRAC_DEC_3(x2,x1,x0,y2,y1,y0)				\
+  do {									\
+    UWtype _t0, _t1, _t2;						\
+    _t0 = x0, _t1 = x1, _t2 = x2;					\
+    __FP_FRAC_SUB_3 (x2, x1, x0, _t2, _t1, _t0, y2, y1, y0);		\
+  } while (0)
+#endif
+
+#ifndef __FP_FRAC_DEC_4
+#define __FP_FRAC_DEC_4(x3,x2,x1,x0,y3,y2,y1,y0)			\
+  do {									\
+    UWtype _t0, _t1, _t2, _t3;						\
+    _t0 = x0, _t1 = x1, _t2 = x2, _t3 = x3;				\
+    __FP_FRAC_SUB_4 (x3,x2,x1,x0,_t3,_t2,_t1,_t0, y3,y2,y1,y0);		\
+  } while (0)
+#endif
+
+#ifndef __FP_FRAC_ADDI_4
+#define __FP_FRAC_ADDI_4(x3,x2,x1,x0,i)					\
+  do {									\
+    UWtype _t;								\
+    _t = ((x0 += i) < i);						\
+    x1 += _t; _t = (x1 < _t);						\
+    x2 += _t; _t = (x2 < _t);						\
+    x3 += _t;								\
+  } while (0)
+#endif
+
+/* Convert FP values between word sizes. This appears to be more
+ * complicated than I'd have expected it to be, so these might be
+ * wrong... These macros are in any case somewhat bogus because they
+ * use information about what various FRAC_n variables look like 
+ * internally [eg, that 2 word vars are X_f0 and x_f1]. But so do
+ * the ones in op-2.h and op-1.h. 
+ */
+#define _FP_FRAC_CONV_1_4(dfs, sfs, D, S)				\
+   do {									\
+     if (S##_c != FP_CLS_NAN)						\
+       _FP_FRAC_SRS_4(S, (_FP_WFRACBITS_##sfs - _FP_WFRACBITS_##dfs),	\
+			  _FP_WFRACBITS_##sfs);				\
+     else								\
+       _FP_FRAC_SRL_4(S, (_FP_WFRACBITS_##sfs - _FP_WFRACBITS_##dfs));	\
+     D##_f = S##_f[0];							\
+  } while (0)
+
+#define _FP_FRAC_CONV_2_4(dfs, sfs, D, S)				\
+   do {									\
+     if (S##_c != FP_CLS_NAN)						\
+       _FP_FRAC_SRS_4(S, (_FP_WFRACBITS_##sfs - _FP_WFRACBITS_##dfs),	\
+		      _FP_WFRACBITS_##sfs);				\
+     else								\
+       _FP_FRAC_SRL_4(S, (_FP_WFRACBITS_##sfs - _FP_WFRACBITS_##dfs));	\
+     D##_f0 = S##_f[0];							\
+     D##_f1 = S##_f[1];							\
+  } while (0)
+
+/* Assembly/disassembly for converting to/from integral types.  
+ * No shifting or overflow handled here.
+ */
+/* Put the FP value X into r, which is an integer of size rsize. */
+#define _FP_FRAC_ASSEMBLE_4(r, X, rsize)				\
+  do {									\
+    if (rsize <= _FP_W_TYPE_SIZE)					\
+      r = X##_f[0];							\
+    else if (rsize <= 2*_FP_W_TYPE_SIZE)				\
+    {									\
+      r = X##_f[1];							\
+      r <<= _FP_W_TYPE_SIZE;						\
+      r += X##_f[0];							\
+    }									\
+    else								\
+    {									\
+      /* I'm feeling lazy so we deal with int == 3words (implausible)*/	\
+      /* and int == 4words as a single case.			 */	\
+      r = X##_f[3];							\
+      r <<= _FP_W_TYPE_SIZE;						\
+      r += X##_f[2];							\
+      r <<= _FP_W_TYPE_SIZE;						\
+      r += X##_f[1];							\
+      r <<= _FP_W_TYPE_SIZE;						\
+      r += X##_f[0];							\
+    }									\
+  } while (0)
+
+/* "No disassemble Number Five!" */
+/* move an integer of size rsize into X's fractional part. We rely on
+ * the _f[] array consisting of words of size _FP_W_TYPE_SIZE to avoid
+ * having to mask the values we store into it.
+ */
+#define _FP_FRAC_DISASSEMBLE_4(X, r, rsize)				\
+  do {									\
+    X##_f[0] = r;							\
+    X##_f[1] = (rsize <= _FP_W_TYPE_SIZE ? 0 : r >> _FP_W_TYPE_SIZE);	\
+    X##_f[2] = (rsize <= 2*_FP_W_TYPE_SIZE ? 0 : r >> 2*_FP_W_TYPE_SIZE); \
+    X##_f[3] = (rsize <= 3*_FP_W_TYPE_SIZE ? 0 : r >> 3*_FP_W_TYPE_SIZE); \
+  } while (0)
+
+#define _FP_FRAC_CONV_4_1(dfs, sfs, D, S)				\
+   do {									\
+     D##_f[0] = S##_f;							\
+     D##_f[1] = D##_f[2] = D##_f[3] = 0;				\
+     _FP_FRAC_SLL_4(D, (_FP_WFRACBITS_##dfs - _FP_WFRACBITS_##sfs));	\
+   } while (0)
+
+#define _FP_FRAC_CONV_4_2(dfs, sfs, D, S)				\
+   do {									\
+     D##_f[0] = S##_f0;							\
+     D##_f[1] = S##_f1;							\
+     D##_f[2] = D##_f[3] = 0;						\
+     _FP_FRAC_SLL_4(D, (_FP_WFRACBITS_##dfs - _FP_WFRACBITS_##sfs));	\
+   } while (0)
+
+#endif
diff --git a/include/math-emu/op-8.h b/include/math-emu/op-8.h
new file mode 100644
index 00000000..8b8c05eb
--- /dev/null
+++ b/include/math-emu/op-8.h
@@ -0,0 +1,107 @@
+/* Software floating-point emulation.
+   Basic eight-word fraction declaration and manipulation.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz) and
+		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
+                                                         
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef __MATH_EMU_OP_8_H__
+#define __MATH_EMU_OP_8_H__
+
+/* We need just a few things from here for op-4, if we ever need some
+   other macros, they can be added. */
+#define _FP_FRAC_DECL_8(X)	_FP_W_TYPE X##_f[8]
+#define _FP_FRAC_HIGH_8(X)	(X##_f[7])
+#define _FP_FRAC_LOW_8(X)	(X##_f[0])
+#define _FP_FRAC_WORD_8(X,w)	(X##_f[w])
+
+#define _FP_FRAC_SLL_8(X,N)						\
+  do {									\
+    _FP_I_TYPE _up, _down, _skip, _i;					\
+    _skip = (N) / _FP_W_TYPE_SIZE;					\
+    _up = (N) % _FP_W_TYPE_SIZE;					\
+    _down = _FP_W_TYPE_SIZE - _up;					\
+    if (!_up)								\
+      for (_i = 7; _i >= _skip; --_i)					\
+	X##_f[_i] = X##_f[_i-_skip];					\
+    else								\
+      {									\
+	for (_i = 7; _i > _skip; --_i)					\
+	  X##_f[_i] = X##_f[_i-_skip] << _up				\
+		      | X##_f[_i-_skip-1] >> _down;			\
+	X##_f[_i--] = X##_f[0] << _up; 					\
+      }									\
+    for (; _i >= 0; --_i)						\
+      X##_f[_i] = 0;							\
+  } while (0)
+
+#define _FP_FRAC_SRL_8(X,N)						\
+  do {									\
+    _FP_I_TYPE _up, _down, _skip, _i;					\
+    _skip = (N) / _FP_W_TYPE_SIZE;					\
+    _down = (N) % _FP_W_TYPE_SIZE;					\
+    _up = _FP_W_TYPE_SIZE - _down;					\
+    if (!_down)								\
+      for (_i = 0; _i <= 7-_skip; ++_i)					\
+	X##_f[_i] = X##_f[_i+_skip];					\
+    else								\
+      {									\
+	for (_i = 0; _i < 7-_skip; ++_i)				\
+	  X##_f[_i] = X##_f[_i+_skip] >> _down				\
+		      | X##_f[_i+_skip+1] << _up;			\
+	X##_f[_i++] = X##_f[7] >> _down;				\
+      }									\
+    for (; _i < 8; ++_i)						\
+      X##_f[_i] = 0;							\
+  } while (0)
+
+
+/* Right shift with sticky-lsb. 
+ * What this actually means is that we do a standard right-shift,
+ * but that if any of the bits that fall off the right hand side
+ * were one then we always set the LSbit.
+ */
+#define _FP_FRAC_SRS_8(X,N,size)					\
+  do {									\
+    _FP_I_TYPE _up, _down, _skip, _i;					\
+    _FP_W_TYPE _s;							\
+    _skip = (N) / _FP_W_TYPE_SIZE;					\
+    _down = (N) % _FP_W_TYPE_SIZE;					\
+    _up = _FP_W_TYPE_SIZE - _down;					\
+    for (_s = _i = 0; _i < _skip; ++_i)					\
+      _s |= X##_f[_i];							\
+    _s |= X##_f[_i] << _up;						\
+/* s is now != 0 if we want to set the LSbit */				\
+    if (!_down)								\
+      for (_i = 0; _i <= 7-_skip; ++_i)					\
+	X##_f[_i] = X##_f[_i+_skip];					\
+    else								\
+      {									\
+	for (_i = 0; _i < 7-_skip; ++_i)				\
+	  X##_f[_i] = X##_f[_i+_skip] >> _down				\
+		      | X##_f[_i+_skip+1] << _up;			\
+	X##_f[_i++] = X##_f[7] >> _down;				\
+      }									\
+    for (; _i < 8; ++_i)						\
+      X##_f[_i] = 0;							\
+    /* don't fix the LSB until the very end when we're sure f[0] is stable */	\
+    X##_f[0] |= (_s != 0);						\
+  } while (0)
+
+#endif
diff --git a/include/math-emu/op-common.h b/include/math-emu/op-common.h
new file mode 100644
index 00000000..9696a5e2
--- /dev/null
+++ b/include/math-emu/op-common.h
@@ -0,0 +1,871 @@
+/* Software floating-point emulation. Common operations.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz),
+		  David S. Miller (davem@redhat.com) and
+		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef __MATH_EMU_OP_COMMON_H__
+#define __MATH_EMU_OP_COMMON_H__
+
+#define _FP_DECL(wc, X)			\
+  _FP_I_TYPE X##_c=0, X##_s=0, X##_e=0;	\
+  _FP_FRAC_DECL_##wc(X)
+
+/*
+ * Finish truly unpacking a native fp value by classifying the kind
+ * of fp value and normalizing both the exponent and the fraction.
+ */
+
+#define _FP_UNPACK_CANONICAL(fs, wc, X)					\
+do {									\
+  switch (X##_e)							\
+  {									\
+  default:								\
+    _FP_FRAC_HIGH_RAW_##fs(X) |= _FP_IMPLBIT_##fs;			\
+    _FP_FRAC_SLL_##wc(X, _FP_WORKBITS);					\
+    X##_e -= _FP_EXPBIAS_##fs;						\
+    X##_c = FP_CLS_NORMAL;						\
+    break;								\
+									\
+  case 0:								\
+    if (_FP_FRAC_ZEROP_##wc(X))						\
+      X##_c = FP_CLS_ZERO;						\
+    else								\
+      {									\
+	/* a denormalized number */					\
+	_FP_I_TYPE _shift;						\
+	_FP_FRAC_CLZ_##wc(_shift, X);					\
+	_shift -= _FP_FRACXBITS_##fs;					\
+	_FP_FRAC_SLL_##wc(X, (_shift+_FP_WORKBITS));			\
+	X##_e -= _FP_EXPBIAS_##fs - 1 + _shift;				\
+	X##_c = FP_CLS_NORMAL;						\
+	FP_SET_EXCEPTION(FP_EX_DENORM);					\
+	if (FP_DENORM_ZERO)						\
+	  {								\
+	    FP_SET_EXCEPTION(FP_EX_INEXACT);				\
+	    X##_c = FP_CLS_ZERO;					\
+	  }								\
+      }									\
+    break;								\
+									\
+  case _FP_EXPMAX_##fs:							\
+    if (_FP_FRAC_ZEROP_##wc(X))						\
+      X##_c = FP_CLS_INF;						\
+    else								\
+      {									\
+	X##_c = FP_CLS_NAN;						\
+	/* Check for signaling NaN */					\
+	if (!(_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs))		\
+	  FP_SET_EXCEPTION(FP_EX_INVALID | FP_EX_INVALID_SNAN);		\
+      }									\
+    break;								\
+  }									\
+} while (0)
+
+/*
+ * Before packing the bits back into the native fp result, take care
+ * of such mundane things as rounding and overflow.  Also, for some
+ * kinds of fp values, the original parts may not have been fully
+ * extracted -- but that is ok, we can regenerate them now.
+ */
+
+#define _FP_PACK_CANONICAL(fs, wc, X)				\
+do {								\
+  switch (X##_c)						\
+  {								\
+  case FP_CLS_NORMAL:						\
+    X##_e += _FP_EXPBIAS_##fs;					\
+    if (X##_e > 0)						\
+      {								\
+	_FP_ROUND(wc, X);					\
+	if (_FP_FRAC_OVERP_##wc(fs, X))				\
+	  {							\
+	    _FP_FRAC_CLEAR_OVERP_##wc(fs, X);			\
+	    X##_e++;						\
+	  }							\
+	_FP_FRAC_SRL_##wc(X, _FP_WORKBITS);			\
+	if (X##_e >= _FP_EXPMAX_##fs)				\
+	  {							\
+	    /* overflow */					\
+	    switch (FP_ROUNDMODE)				\
+	      {							\
+	      case FP_RND_NEAREST:				\
+		X##_c = FP_CLS_INF;				\
+		break;						\
+	      case FP_RND_PINF:					\
+		if (!X##_s) X##_c = FP_CLS_INF;			\
+		break;						\
+	      case FP_RND_MINF:					\
+		if (X##_s) X##_c = FP_CLS_INF;			\
+		break;						\
+	      }							\
+	    if (X##_c == FP_CLS_INF)				\
+	      {							\
+		/* Overflow to infinity */			\
+		X##_e = _FP_EXPMAX_##fs;			\
+		_FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);	\
+	      }							\
+	    else						\
+	      {							\
+		/* Overflow to maximum normal */		\
+		X##_e = _FP_EXPMAX_##fs - 1;			\
+		_FP_FRAC_SET_##wc(X, _FP_MAXFRAC_##wc);		\
+	      }							\
+	    FP_SET_EXCEPTION(FP_EX_OVERFLOW);			\
+            FP_SET_EXCEPTION(FP_EX_INEXACT);			\
+	  }							\
+      }								\
+    else							\
+      {								\
+	/* we've got a denormalized number */			\
+	X##_e = -X##_e + 1;					\
+	if (X##_e <= _FP_WFRACBITS_##fs)			\
+	  {							\
+	    _FP_FRAC_SRS_##wc(X, X##_e, _FP_WFRACBITS_##fs);	\
+	    if (_FP_FRAC_HIGH_##fs(X)				\
+		& (_FP_OVERFLOW_##fs >> 1))			\
+	      {							\
+	        X##_e = 1;					\
+	        _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);	\
+	      }							\
+	    else						\
+	      {							\
+		_FP_ROUND(wc, X);				\
+		if (_FP_FRAC_HIGH_##fs(X)			\
+		   & (_FP_OVERFLOW_##fs >> 1))			\
+		  {						\
+		    X##_e = 1;					\
+		    _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);	\
+		    FP_SET_EXCEPTION(FP_EX_INEXACT);		\
+		  }						\
+		else						\
+		  {						\
+		    X##_e = 0;					\
+		    _FP_FRAC_SRL_##wc(X, _FP_WORKBITS);		\
+		  }						\
+	      }							\
+	    if ((FP_CUR_EXCEPTIONS & FP_EX_INEXACT) ||		\
+		(FP_TRAPPING_EXCEPTIONS & FP_EX_UNDERFLOW))	\
+		FP_SET_EXCEPTION(FP_EX_UNDERFLOW);		\
+	  }							\
+	else							\
+	  {							\
+	    /* underflow to zero */				\
+	    X##_e = 0;						\
+	    if (!_FP_FRAC_ZEROP_##wc(X))			\
+	      {							\
+	        _FP_FRAC_SET_##wc(X, _FP_MINFRAC_##wc);		\
+	        _FP_ROUND(wc, X);				\
+	        _FP_FRAC_LOW_##wc(X) >>= (_FP_WORKBITS);	\
+	      }							\
+	    FP_SET_EXCEPTION(FP_EX_UNDERFLOW);			\
+	  }							\
+      }								\
+    break;							\
+								\
+  case FP_CLS_ZERO:						\
+    X##_e = 0;							\
+    _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);			\
+    break;							\
+								\
+  case FP_CLS_INF:						\
+    X##_e = _FP_EXPMAX_##fs;					\
+    _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);			\
+    break;							\
+								\
+  case FP_CLS_NAN:						\
+    X##_e = _FP_EXPMAX_##fs;					\
+    if (!_FP_KEEPNANFRACP)					\
+      {								\
+	_FP_FRAC_SET_##wc(X, _FP_NANFRAC_##fs);			\
+	X##_s = _FP_NANSIGN_##fs;				\
+      }								\
+    else							\
+      _FP_FRAC_HIGH_RAW_##fs(X) |= _FP_QNANBIT_##fs;		\
+    break;							\
+  }								\
+} while (0)
+
+/* This one accepts raw argument and not cooked,  returns
+ * 1 if X is a signaling NaN.
+ */
+#define _FP_ISSIGNAN(fs, wc, X)					\
+({								\
+  int __ret = 0;						\
+  if (X##_e == _FP_EXPMAX_##fs)					\
+    {								\
+      if (!_FP_FRAC_ZEROP_##wc(X)				\
+	  && !(_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs))	\
+	__ret = 1;						\
+    }								\
+  __ret;							\
+})
+
+
+
+
+
+/*
+ * Main addition routine.  The input values should be cooked.
+ */
+
+#define _FP_ADD_INTERNAL(fs, wc, R, X, Y, OP)				     \
+do {									     \
+  switch (_FP_CLS_COMBINE(X##_c, Y##_c))				     \
+  {									     \
+  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NORMAL):			     \
+    {									     \
+      /* shift the smaller number so that its exponent matches the larger */ \
+      _FP_I_TYPE diff = X##_e - Y##_e;					     \
+									     \
+      if (diff < 0)							     \
+	{								     \
+	  diff = -diff;							     \
+	  if (diff <= _FP_WFRACBITS_##fs)				     \
+	    _FP_FRAC_SRS_##wc(X, diff, _FP_WFRACBITS_##fs);		     \
+	  else if (!_FP_FRAC_ZEROP_##wc(X))				     \
+	    _FP_FRAC_SET_##wc(X, _FP_MINFRAC_##wc);			     \
+	  R##_e = Y##_e;						     \
+	}								     \
+      else								     \
+	{								     \
+	  if (diff > 0)							     \
+	    {								     \
+	      if (diff <= _FP_WFRACBITS_##fs)				     \
+	        _FP_FRAC_SRS_##wc(Y, diff, _FP_WFRACBITS_##fs);		     \
+	      else if (!_FP_FRAC_ZEROP_##wc(Y))				     \
+	        _FP_FRAC_SET_##wc(Y, _FP_MINFRAC_##wc);			     \
+	    }								     \
+	  R##_e = X##_e;						     \
+	}								     \
+									     \
+      R##_c = FP_CLS_NORMAL;						     \
+									     \
+      if (X##_s == Y##_s)						     \
+	{								     \
+	  R##_s = X##_s;						     \
+	  _FP_FRAC_ADD_##wc(R, X, Y);					     \
+	  if (_FP_FRAC_OVERP_##wc(fs, R))				     \
+	    {								     \
+	      _FP_FRAC_SRS_##wc(R, 1, _FP_WFRACBITS_##fs);		     \
+	      R##_e++;							     \
+	    }								     \
+	}								     \
+      else								     \
+	{								     \
+	  R##_s = X##_s;						     \
+	  _FP_FRAC_SUB_##wc(R, X, Y);					     \
+	  if (_FP_FRAC_ZEROP_##wc(R))					     \
+	    {								     \
+	      /* return an exact zero */				     \
+	      if (FP_ROUNDMODE == FP_RND_MINF)				     \
+		R##_s |= Y##_s;						     \
+	      else							     \
+		R##_s &= Y##_s;						     \
+	      R##_c = FP_CLS_ZERO;					     \
+	    }								     \
+	  else								     \
+	    {								     \
+	      if (_FP_FRAC_NEGP_##wc(R))				     \
+		{							     \
+		  _FP_FRAC_SUB_##wc(R, Y, X);				     \
+		  R##_s = Y##_s;					     \
+		}							     \
+									     \
+	      /* renormalize after subtraction */			     \
+	      _FP_FRAC_CLZ_##wc(diff, R);				     \
+	      diff -= _FP_WFRACXBITS_##fs;				     \
+	      if (diff)							     \
+		{							     \
+		  R##_e -= diff;					     \
+		  _FP_FRAC_SLL_##wc(R, diff);				     \
+		}							     \
+	    }								     \
+	}								     \
+      break;								     \
+    }									     \
+									     \
+  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NAN):				     \
+    _FP_CHOOSENAN(fs, wc, R, X, Y, OP);					     \
+    break;								     \
+									     \
+  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_ZERO):			     \
+    R##_e = X##_e;							     \
+  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NORMAL):			     \
+  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_INF):				     \
+  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_ZERO):				     \
+    _FP_FRAC_COPY_##wc(R, X);						     \
+    R##_s = X##_s;							     \
+    R##_c = X##_c;							     \
+    break;								     \
+									     \
+  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NORMAL):			     \
+    R##_e = Y##_e;							     \
+  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NAN):			     \
+  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NAN):				     \
+  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NAN):				     \
+    _FP_FRAC_COPY_##wc(R, Y);						     \
+    R##_s = Y##_s;							     \
+    R##_c = Y##_c;							     \
+    break;								     \
+									     \
+  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_INF):				     \
+    if (X##_s != Y##_s)							     \
+      {									     \
+	/* +INF + -INF => NAN */					     \
+	_FP_FRAC_SET_##wc(R, _FP_NANFRAC_##fs);				     \
+	R##_s = _FP_NANSIGN_##fs;					     \
+	R##_c = FP_CLS_NAN;						     \
+	FP_SET_EXCEPTION(FP_EX_INVALID | FP_EX_INVALID_ISI);		     \
+	break;								     \
+      }									     \
+    /* FALLTHRU */							     \
+									     \
+  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NORMAL):			     \
+  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_ZERO):				     \
+    R##_s = X##_s;							     \
+    R##_c = FP_CLS_INF;							     \
+    break;								     \
+									     \
+  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_INF):			     \
+  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_INF):				     \
+    R##_s = Y##_s;							     \
+    R##_c = FP_CLS_INF;							     \
+    break;								     \
+									     \
+  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_ZERO):			     \
+    /* make sure the sign is correct */					     \
+    if (FP_ROUNDMODE == FP_RND_MINF)					     \
+      R##_s = X##_s | Y##_s;						     \
+    else								     \
+      R##_s = X##_s & Y##_s;						     \
+    R##_c = FP_CLS_ZERO;						     \
+    break;								     \
+									     \
+  default:								     \
+    abort();								     \
+  }									     \
+} while (0)
+
+#define _FP_ADD(fs, wc, R, X, Y) _FP_ADD_INTERNAL(fs, wc, R, X, Y, '+')
+#define _FP_SUB(fs, wc, R, X, Y)					     \
+  do {									     \
+    if (Y##_c != FP_CLS_NAN) Y##_s ^= 1;				     \
+    _FP_ADD_INTERNAL(fs, wc, R, X, Y, '-');				     \
+  } while (0)
+
+
+/*
+ * Main negation routine.  FIXME -- when we care about setting exception
+ * bits reliably, this will not do.  We should examine all of the fp classes.
+ */
+
+#define _FP_NEG(fs, wc, R, X)		\
+  do {					\
+    _FP_FRAC_COPY_##wc(R, X);		\
+    R##_c = X##_c;			\
+    R##_e = X##_e;			\
+    R##_s = 1 ^ X##_s;			\
+  } while (0)
+
+
+/*
+ * Main multiplication routine.  The input values should be cooked.
+ */
+
+#define _FP_MUL(fs, wc, R, X, Y)			\
+do {							\
+  R##_s = X##_s ^ Y##_s;				\
+  switch (_FP_CLS_COMBINE(X##_c, Y##_c))		\
+  {							\
+  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NORMAL):	\
+    R##_c = FP_CLS_NORMAL;				\
+    R##_e = X##_e + Y##_e + 1;				\
+							\
+    _FP_MUL_MEAT_##fs(R,X,Y);				\
+							\
+    if (_FP_FRAC_OVERP_##wc(fs, R))			\
+      _FP_FRAC_SRS_##wc(R, 1, _FP_WFRACBITS_##fs);	\
+    else						\
+      R##_e--;						\
+    break;						\
+							\
+  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NAN):		\
+    _FP_CHOOSENAN(fs, wc, R, X, Y, '*');		\
+    break;						\
+							\
+  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NORMAL):	\
+  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_INF):		\
+  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_ZERO):		\
+    R##_s = X##_s;					\
+							\
+  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_INF):		\
+  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NORMAL):	\
+  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NORMAL):	\
+  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_ZERO):	\
+    _FP_FRAC_COPY_##wc(R, X);				\
+    R##_c = X##_c;					\
+    break;						\
+							\
+  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NAN):	\
+  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NAN):		\
+  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NAN):		\
+    R##_s = Y##_s;					\
+							\
+  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_INF):	\
+  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_ZERO):	\
+    _FP_FRAC_COPY_##wc(R, Y);				\
+    R##_c = Y##_c;					\
+    break;						\
+							\
+  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_ZERO):		\
+  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_INF):		\
+    R##_s = _FP_NANSIGN_##fs;				\
+    R##_c = FP_CLS_NAN;					\
+    _FP_FRAC_SET_##wc(R, _FP_NANFRAC_##fs);		\
+    FP_SET_EXCEPTION(FP_EX_INVALID | FP_EX_INVALID_IMZ);\
+    break;						\
+							\
+  default:						\
+    abort();						\
+  }							\
+} while (0)
+
+
+/*
+ * Main division routine.  The input values should be cooked.
+ */
+
+#define _FP_DIV(fs, wc, R, X, Y)			\
+do {							\
+  R##_s = X##_s ^ Y##_s;				\
+  switch (_FP_CLS_COMBINE(X##_c, Y##_c))		\
+  {							\
+  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NORMAL):	\
+    R##_c = FP_CLS_NORMAL;				\
+    R##_e = X##_e - Y##_e;				\
+							\
+    _FP_DIV_MEAT_##fs(R,X,Y);				\
+    break;						\
+							\
+  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NAN):		\
+    _FP_CHOOSENAN(fs, wc, R, X, Y, '/');		\
+    break;						\
+							\
+  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NORMAL):	\
+  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_INF):		\
+  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_ZERO):		\
+    R##_s = X##_s;					\
+    _FP_FRAC_COPY_##wc(R, X);				\
+    R##_c = X##_c;					\
+    break;						\
+							\
+  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NAN):	\
+  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NAN):		\
+  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NAN):		\
+    R##_s = Y##_s;					\
+    _FP_FRAC_COPY_##wc(R, Y);				\
+    R##_c = Y##_c;					\
+    break;						\
+							\
+  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_INF):	\
+  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_INF):		\
+  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NORMAL):	\
+    R##_c = FP_CLS_ZERO;				\
+    break;						\
+							\
+  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_ZERO):	\
+    FP_SET_EXCEPTION(FP_EX_DIVZERO);			\
+  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_ZERO):		\
+  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NORMAL):	\
+    R##_c = FP_CLS_INF;					\
+    break;						\
+							\
+  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_INF):		\
+    R##_s = _FP_NANSIGN_##fs;				\
+    R##_c = FP_CLS_NAN;					\
+    _FP_FRAC_SET_##wc(R, _FP_NANFRAC_##fs);		\
+    FP_SET_EXCEPTION(FP_EX_INVALID | FP_EX_INVALID_IDI);\
+    break;						\
+							\
+  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_ZERO):	\
+    R##_s = _FP_NANSIGN_##fs;				\
+    R##_c = FP_CLS_NAN;					\
+    _FP_FRAC_SET_##wc(R, _FP_NANFRAC_##fs);		\
+    FP_SET_EXCEPTION(FP_EX_INVALID | FP_EX_INVALID_ZDZ);\
+    break;						\
+							\
+  default:						\
+    abort();						\
+  }							\
+} while (0)
+
+
+/*
+ * Main differential comparison routine.  The inputs should be raw not
+ * cooked.  The return is -1,0,1 for normal values, 2 otherwise.
+ */
+
+#define _FP_CMP(fs, wc, ret, X, Y, un)					\
+  do {									\
+    /* NANs are unordered */						\
+    if ((X##_e == _FP_EXPMAX_##fs && !_FP_FRAC_ZEROP_##wc(X))		\
+	|| (Y##_e == _FP_EXPMAX_##fs && !_FP_FRAC_ZEROP_##wc(Y)))	\
+      {									\
+	ret = un;							\
+      }									\
+    else								\
+      {									\
+	int __is_zero_x;						\
+	int __is_zero_y;						\
+									\
+	__is_zero_x = (!X##_e && _FP_FRAC_ZEROP_##wc(X)) ? 1 : 0;	\
+	__is_zero_y = (!Y##_e && _FP_FRAC_ZEROP_##wc(Y)) ? 1 : 0;	\
+									\
+	if (__is_zero_x && __is_zero_y)					\
+		ret = 0;						\
+	else if (__is_zero_x)						\
+		ret = Y##_s ? 1 : -1;					\
+	else if (__is_zero_y)						\
+		ret = X##_s ? -1 : 1;					\
+	else if (X##_s != Y##_s)					\
+	  ret = X##_s ? -1 : 1;						\
+	else if (X##_e > Y##_e)						\
+	  ret = X##_s ? -1 : 1;						\
+	else if (X##_e < Y##_e)						\
+	  ret = X##_s ? 1 : -1;						\
+	else if (_FP_FRAC_GT_##wc(X, Y))				\
+	  ret = X##_s ? -1 : 1;						\
+	else if (_FP_FRAC_GT_##wc(Y, X))				\
+	  ret = X##_s ? 1 : -1;						\
+	else								\
+	  ret = 0;							\
+      }									\
+  } while (0)
+
+
+/* Simplification for strict equality.  */
+
+#define _FP_CMP_EQ(fs, wc, ret, X, Y)					  \
+  do {									  \
+    /* NANs are unordered */						  \
+    if ((X##_e == _FP_EXPMAX_##fs && !_FP_FRAC_ZEROP_##wc(X))		  \
+	|| (Y##_e == _FP_EXPMAX_##fs && !_FP_FRAC_ZEROP_##wc(Y)))	  \
+      {									  \
+	ret = 1;							  \
+      }									  \
+    else								  \
+      {									  \
+	ret = !(X##_e == Y##_e						  \
+		&& _FP_FRAC_EQ_##wc(X, Y)				  \
+		&& (X##_s == Y##_s || !X##_e && _FP_FRAC_ZEROP_##wc(X))); \
+      }									  \
+  } while (0)
+
+/*
+ * Main square root routine.  The input value should be cooked.
+ */
+
+#define _FP_SQRT(fs, wc, R, X)						\
+do {									\
+    _FP_FRAC_DECL_##wc(T); _FP_FRAC_DECL_##wc(S);			\
+    _FP_W_TYPE q;							\
+    switch (X##_c)							\
+    {									\
+    case FP_CLS_NAN:							\
+	_FP_FRAC_COPY_##wc(R, X);					\
+	R##_s = X##_s;							\
+    	R##_c = FP_CLS_NAN;						\
+    	break;								\
+    case FP_CLS_INF:							\
+    	if (X##_s)							\
+    	  {								\
+    	    R##_s = _FP_NANSIGN_##fs;					\
+	    R##_c = FP_CLS_NAN; /* NAN */				\
+	    _FP_FRAC_SET_##wc(R, _FP_NANFRAC_##fs);			\
+	    FP_SET_EXCEPTION(FP_EX_INVALID);				\
+    	  }								\
+    	else								\
+    	  {								\
+    	    R##_s = 0;							\
+    	    R##_c = FP_CLS_INF; /* sqrt(+inf) = +inf */			\
+    	  }								\
+    	break;								\
+    case FP_CLS_ZERO:							\
+	R##_s = X##_s;							\
+	R##_c = FP_CLS_ZERO; /* sqrt(+-0) = +-0 */			\
+	break;								\
+    case FP_CLS_NORMAL:							\
+    	R##_s = 0;							\
+        if (X##_s)							\
+          {								\
+	    R##_c = FP_CLS_NAN; /* sNAN */				\
+	    R##_s = _FP_NANSIGN_##fs;					\
+	    _FP_FRAC_SET_##wc(R, _FP_NANFRAC_##fs);			\
+	    FP_SET_EXCEPTION(FP_EX_INVALID);				\
+	    break;							\
+          }								\
+    	R##_c = FP_CLS_NORMAL;						\
+        if (X##_e & 1)							\
+          _FP_FRAC_SLL_##wc(X, 1);					\
+        R##_e = X##_e >> 1;						\
+        _FP_FRAC_SET_##wc(S, _FP_ZEROFRAC_##wc);			\
+        _FP_FRAC_SET_##wc(R, _FP_ZEROFRAC_##wc);			\
+        q = _FP_OVERFLOW_##fs >> 1;					\
+        _FP_SQRT_MEAT_##wc(R, S, T, X, q);				\
+    }									\
+  } while (0)
+
+/*
+ * Convert from FP to integer
+ */
+
+/* RSIGNED can have following values:
+ * 0:  the number is required to be 0..(2^rsize)-1, if not, NV is set plus
+ *     the result is either 0 or (2^rsize)-1 depending on the sign in such case.
+ * 1:  the number is required to be -(2^(rsize-1))..(2^(rsize-1))-1, if not, NV is
+ *     set plus the result is either -(2^(rsize-1)) or (2^(rsize-1))-1 depending
+ *     on the sign in such case.
+ * 2:  the number is required to be -(2^(rsize-1))..(2^(rsize-1))-1, if not, NV is
+ *     set plus the result is truncated to fit into destination.
+ * -1: the number is required to be -(2^(rsize-1))..(2^rsize)-1, if not, NV is
+ *     set plus the result is either -(2^(rsize-1)) or (2^(rsize-1))-1 depending
+ *     on the sign in such case.
+ */
+#define _FP_TO_INT(fs, wc, r, X, rsize, rsigned)				\
+  do {										\
+    switch (X##_c)								\
+      {										\
+      case FP_CLS_NORMAL:							\
+	if (X##_e < 0)								\
+	  {									\
+	    FP_SET_EXCEPTION(FP_EX_INEXACT);					\
+	  case FP_CLS_ZERO:							\
+	    r = 0;								\
+	  }									\
+	else if (X##_e >= rsize - (rsigned > 0 || X##_s)			\
+		 || (!rsigned && X##_s))					\
+	  {	/* overflow */							\
+	  case FP_CLS_NAN:                                                      \
+	  case FP_CLS_INF:							\
+	    if (rsigned == 2)							\
+	      {									\
+		if (X##_c != FP_CLS_NORMAL					\
+		    || X##_e >= rsize - 1 + _FP_WFRACBITS_##fs)			\
+		  r = 0;							\
+		else								\
+		  {								\
+		    _FP_FRAC_SLL_##wc(X, (X##_e - _FP_WFRACBITS_##fs + 1));	\
+		    _FP_FRAC_ASSEMBLE_##wc(r, X, rsize);			\
+		  }								\
+	      }									\
+	    else if (rsigned)							\
+	      {									\
+		r = 1;								\
+		r <<= rsize - 1;						\
+		r -= 1 - X##_s;							\
+	      }									\
+	    else								\
+	      {									\
+		r = 0;								\
+		if (X##_s)							\
+		  r = ~r;							\
+	      }									\
+	    FP_SET_EXCEPTION(FP_EX_INVALID);					\
+	  }									\
+	else									\
+	  {									\
+	    if (_FP_W_TYPE_SIZE*wc < rsize)					\
+	      {									\
+		_FP_FRAC_ASSEMBLE_##wc(r, X, rsize);				\
+		r <<= X##_e - _FP_WFRACBITS_##fs;				\
+	      }									\
+	    else								\
+	      {									\
+		if (X##_e >= _FP_WFRACBITS_##fs)				\
+		  _FP_FRAC_SLL_##wc(X, (X##_e - _FP_WFRACBITS_##fs + 1));	\
+		else if (X##_e < _FP_WFRACBITS_##fs - 1)			\
+		  {								\
+		    _FP_FRAC_SRS_##wc(X, (_FP_WFRACBITS_##fs - X##_e - 2),	\
+				      _FP_WFRACBITS_##fs);			\
+		    if (_FP_FRAC_LOW_##wc(X) & 1)				\
+		      FP_SET_EXCEPTION(FP_EX_INEXACT);				\
+		    _FP_FRAC_SRL_##wc(X, 1);					\
+		  }								\
+		_FP_FRAC_ASSEMBLE_##wc(r, X, rsize);				\
+	      }									\
+	    if (rsigned && X##_s)						\
+	      r = -r;								\
+	  }									\
+	break;									\
+      }										\
+  } while (0)
+
+#define _FP_TO_INT_ROUND(fs, wc, r, X, rsize, rsigned)				\
+  do {										\
+    r = 0;									\
+    switch (X##_c)								\
+      {										\
+      case FP_CLS_NORMAL:							\
+	if (X##_e >= _FP_FRACBITS_##fs - 1)					\
+	  {									\
+	    if (X##_e < rsize - 1 + _FP_WFRACBITS_##fs)				\
+	      {									\
+		if (X##_e >= _FP_WFRACBITS_##fs - 1)				\
+		  {								\
+		    _FP_FRAC_ASSEMBLE_##wc(r, X, rsize);			\
+		    r <<= X##_e - _FP_WFRACBITS_##fs + 1;			\
+		  }								\
+		else								\
+		  {								\
+		    _FP_FRAC_SRL_##wc(X, _FP_WORKBITS - X##_e			\
+				      + _FP_FRACBITS_##fs - 1);			\
+		    _FP_FRAC_ASSEMBLE_##wc(r, X, rsize);			\
+		  }								\
+	      }									\
+	  }									\
+	else									\
+	  {									\
+	    if (X##_e <= -_FP_WORKBITS - 1)					\
+	      _FP_FRAC_SET_##wc(X, _FP_MINFRAC_##wc);				\
+	    else								\
+	      _FP_FRAC_SRS_##wc(X, _FP_FRACBITS_##fs - 1 - X##_e,		\
+				_FP_WFRACBITS_##fs);				\
+	    _FP_ROUND(wc, X);							\
+	    _FP_FRAC_SRL_##wc(X, _FP_WORKBITS);					\
+	    _FP_FRAC_ASSEMBLE_##wc(r, X, rsize);				\
+	  }									\
+	if (rsigned && X##_s)							\
+	  r = -r;								\
+	if (X##_e >= rsize - (rsigned > 0 || X##_s)				\
+	    || (!rsigned && X##_s))						\
+	  {	/* overflow */							\
+	  case FP_CLS_NAN:                                                      \
+	  case FP_CLS_INF:							\
+	    if (!rsigned)							\
+	      {									\
+		r = 0;								\
+		if (X##_s)							\
+		  r = ~r;							\
+	      }									\
+	    else if (rsigned != 2)						\
+	      {									\
+		r = 1;								\
+		r <<= rsize - 1;						\
+		r -= 1 - X##_s;							\
+	      }									\
+	    FP_SET_EXCEPTION(FP_EX_INVALID);					\
+	  }									\
+	break;									\
+      case FP_CLS_ZERO:								\
+        break;									\
+      }										\
+  } while (0)
+
+#define _FP_FROM_INT(fs, wc, X, r, rsize, rtype)			\
+  do {									\
+    if (r)								\
+      {									\
+        unsigned rtype ur_;						\
+	X##_c = FP_CLS_NORMAL;						\
+									\
+	if ((X##_s = (r < 0)))						\
+	  ur_ = (unsigned rtype) -r;					\
+	else								\
+	  ur_ = (unsigned rtype) r;					\
+	if (rsize <= _FP_W_TYPE_SIZE)					\
+	  __FP_CLZ(X##_e, ur_);						\
+	else								\
+	  __FP_CLZ_2(X##_e, (_FP_W_TYPE)(ur_ >> _FP_W_TYPE_SIZE), 	\
+		     (_FP_W_TYPE)ur_);					\
+	if (rsize < _FP_W_TYPE_SIZE)					\
+		X##_e -= (_FP_W_TYPE_SIZE - rsize);			\
+	X##_e = rsize - X##_e - 1;					\
+									\
+	if (_FP_FRACBITS_##fs < rsize && _FP_WFRACBITS_##fs <= X##_e)	\
+	  __FP_FRAC_SRS_1(ur_, (X##_e - _FP_WFRACBITS_##fs + 1), rsize);\
+	_FP_FRAC_DISASSEMBLE_##wc(X, ur_, rsize);			\
+	if ((_FP_WFRACBITS_##fs - X##_e - 1) > 0)			\
+	  _FP_FRAC_SLL_##wc(X, (_FP_WFRACBITS_##fs - X##_e - 1));	\
+      }									\
+    else								\
+      {									\
+	X##_c = FP_CLS_ZERO, X##_s = 0;					\
+      }									\
+  } while (0)
+
+
+#define FP_CONV(dfs,sfs,dwc,swc,D,S)			\
+  do {							\
+    _FP_FRAC_CONV_##dwc##_##swc(dfs, sfs, D, S);	\
+    D##_e = S##_e;					\
+    D##_c = S##_c;					\
+    D##_s = S##_s;					\
+  } while (0)
+
+/*
+ * Helper primitives.
+ */
+
+/* Count leading zeros in a word.  */
+
+#ifndef __FP_CLZ
+#if _FP_W_TYPE_SIZE < 64
+/* this is just to shut the compiler up about shifts > word length -- PMM 02/1998 */
+#define __FP_CLZ(r, x)				\
+  do {						\
+    _FP_W_TYPE _t = (x);			\
+    r = _FP_W_TYPE_SIZE - 1;			\
+    if (_t > 0xffff) r -= 16;			\
+    if (_t > 0xffff) _t >>= 16;			\
+    if (_t > 0xff) r -= 8;			\
+    if (_t > 0xff) _t >>= 8;			\
+    if (_t & 0xf0) r -= 4;			\
+    if (_t & 0xf0) _t >>= 4;			\
+    if (_t & 0xc) r -= 2;			\
+    if (_t & 0xc) _t >>= 2;			\
+    if (_t & 0x2) r -= 1;			\
+  } while (0)
+#else /* not _FP_W_TYPE_SIZE < 64 */
+#define __FP_CLZ(r, x)				\
+  do {						\
+    _FP_W_TYPE _t = (x);			\
+    r = _FP_W_TYPE_SIZE - 1;			\
+    if (_t > 0xffffffff) r -= 32;		\
+    if (_t > 0xffffffff) _t >>= 32;		\
+    if (_t > 0xffff) r -= 16;			\
+    if (_t > 0xffff) _t >>= 16;			\
+    if (_t > 0xff) r -= 8;			\
+    if (_t > 0xff) _t >>= 8;			\
+    if (_t & 0xf0) r -= 4;			\
+    if (_t & 0xf0) _t >>= 4;			\
+    if (_t & 0xc) r -= 2;			\
+    if (_t & 0xc) _t >>= 2;			\
+    if (_t & 0x2) r -= 1;			\
+  } while (0)
+#endif /* not _FP_W_TYPE_SIZE < 64 */
+#endif /* ndef __FP_CLZ */
+
+#define _FP_DIV_HELP_imm(q, r, n, d)		\
+  do {						\
+    q = n / d, r = n % d;			\
+  } while (0)
+
+#endif /* __MATH_EMU_OP_COMMON_H__ */
diff --git a/include/math-emu/quad.h b/include/math-emu/quad.h
new file mode 100644
index 00000000..61611362
--- /dev/null
+++ b/include/math-emu/quad.h
@@ -0,0 +1,208 @@
+/* Software floating-point emulation.
+   Definitions for IEEE Quad Precision.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz),
+		  David S. Miller (davem@redhat.com) and
+		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef  __MATH_EMU_QUAD_H__
+#define  __MATH_EMU_QUAD_H__
+
+#if _FP_W_TYPE_SIZE < 32
+#error "Here's a nickel, kid. Go buy yourself a real computer."
+#endif
+
+#if _FP_W_TYPE_SIZE < 64
+#define _FP_FRACTBITS_Q         (4*_FP_W_TYPE_SIZE)
+#else
+#define _FP_FRACTBITS_Q		(2*_FP_W_TYPE_SIZE)
+#endif
+
+#define _FP_FRACBITS_Q		113
+#define _FP_FRACXBITS_Q		(_FP_FRACTBITS_Q - _FP_FRACBITS_Q)
+#define _FP_WFRACBITS_Q		(_FP_WORKBITS + _FP_FRACBITS_Q)
+#define _FP_WFRACXBITS_Q	(_FP_FRACTBITS_Q - _FP_WFRACBITS_Q)
+#define _FP_EXPBITS_Q		15
+#define _FP_EXPBIAS_Q		16383
+#define _FP_EXPMAX_Q		32767
+
+#define _FP_QNANBIT_Q		\
+	((_FP_W_TYPE)1 << (_FP_FRACBITS_Q-2) % _FP_W_TYPE_SIZE)
+#define _FP_IMPLBIT_Q		\
+	((_FP_W_TYPE)1 << (_FP_FRACBITS_Q-1) % _FP_W_TYPE_SIZE)
+#define _FP_OVERFLOW_Q		\
+	((_FP_W_TYPE)1 << (_FP_WFRACBITS_Q % _FP_W_TYPE_SIZE))
+
+#if _FP_W_TYPE_SIZE < 64
+
+union _FP_UNION_Q
+{
+   long double flt;
+   struct 
+   {
+#if __BYTE_ORDER == __BIG_ENDIAN
+      unsigned sign : 1;
+      unsigned exp : _FP_EXPBITS_Q;
+      unsigned long frac3 : _FP_FRACBITS_Q - (_FP_IMPLBIT_Q != 0)-(_FP_W_TYPE_SIZE * 3);
+      unsigned long frac2 : _FP_W_TYPE_SIZE;
+      unsigned long frac1 : _FP_W_TYPE_SIZE;
+      unsigned long frac0 : _FP_W_TYPE_SIZE;
+#else
+      unsigned long frac0 : _FP_W_TYPE_SIZE;
+      unsigned long frac1 : _FP_W_TYPE_SIZE;
+      unsigned long frac2 : _FP_W_TYPE_SIZE;
+      unsigned long frac3 : _FP_FRACBITS_Q - (_FP_IMPLBIT_Q != 0)-(_FP_W_TYPE_SIZE * 3);
+      unsigned exp : _FP_EXPBITS_Q;
+      unsigned sign : 1;
+#endif /* not bigendian */
+   } bits __attribute__((packed));
+};
+
+
+#define FP_DECL_Q(X)		_FP_DECL(4,X)
+#define FP_UNPACK_RAW_Q(X,val)	_FP_UNPACK_RAW_4(Q,X,val)
+#define FP_UNPACK_RAW_QP(X,val)	_FP_UNPACK_RAW_4_P(Q,X,val)
+#define FP_PACK_RAW_Q(val,X)	_FP_PACK_RAW_4(Q,val,X)
+#define FP_PACK_RAW_QP(val,X)		\
+  do {					\
+    if (!FP_INHIBIT_RESULTS)		\
+      _FP_PACK_RAW_4_P(Q,val,X);	\
+  } while (0)
+
+#define FP_UNPACK_Q(X,val)		\
+  do {					\
+    _FP_UNPACK_RAW_4(Q,X,val);		\
+    _FP_UNPACK_CANONICAL(Q,4,X);	\
+  } while (0)
+
+#define FP_UNPACK_QP(X,val)		\
+  do {					\
+    _FP_UNPACK_RAW_4_P(Q,X,val);	\
+    _FP_UNPACK_CANONICAL(Q,4,X);	\
+  } while (0)
+
+#define FP_PACK_Q(val,X)		\
+  do {					\
+    _FP_PACK_CANONICAL(Q,4,X);		\
+    _FP_PACK_RAW_4(Q,val,X);		\
+  } while (0)
+
+#define FP_PACK_QP(val,X)		\
+  do {					\
+    _FP_PACK_CANONICAL(Q,4,X);		\
+    if (!FP_INHIBIT_RESULTS)		\
+      _FP_PACK_RAW_4_P(Q,val,X);	\
+  } while (0)
+
+#define FP_ISSIGNAN_Q(X)		_FP_ISSIGNAN(Q,4,X)
+#define FP_NEG_Q(R,X)			_FP_NEG(Q,4,R,X)
+#define FP_ADD_Q(R,X,Y)			_FP_ADD(Q,4,R,X,Y)
+#define FP_SUB_Q(R,X,Y)			_FP_SUB(Q,4,R,X,Y)
+#define FP_MUL_Q(R,X,Y)			_FP_MUL(Q,4,R,X,Y)
+#define FP_DIV_Q(R,X,Y)			_FP_DIV(Q,4,R,X,Y)
+#define FP_SQRT_Q(R,X)			_FP_SQRT(Q,4,R,X)
+#define _FP_SQRT_MEAT_Q(R,S,T,X,Q)	_FP_SQRT_MEAT_4(R,S,T,X,Q)
+
+#define FP_CMP_Q(r,X,Y,un)	_FP_CMP(Q,4,r,X,Y,un)
+#define FP_CMP_EQ_Q(r,X,Y)	_FP_CMP_EQ(Q,4,r,X,Y)
+
+#define FP_TO_INT_Q(r,X,rsz,rsg)	_FP_TO_INT(Q,4,r,X,rsz,rsg)
+#define FP_TO_INT_ROUND_Q(r,X,rsz,rsg)	_FP_TO_INT_ROUND(Q,4,r,X,rsz,rsg)
+#define FP_FROM_INT_Q(X,r,rs,rt)	_FP_FROM_INT(Q,4,X,r,rs,rt)
+
+#define _FP_FRAC_HIGH_Q(X)	_FP_FRAC_HIGH_4(X)
+#define _FP_FRAC_HIGH_RAW_Q(X)	_FP_FRAC_HIGH_4(X)
+
+#else   /* not _FP_W_TYPE_SIZE < 64 */
+union _FP_UNION_Q
+{
+  long double flt /* __attribute__((mode(TF))) */ ;
+  struct {
+#if __BYTE_ORDER == __BIG_ENDIAN
+    unsigned sign  : 1;
+    unsigned exp   : _FP_EXPBITS_Q;
+    unsigned long frac1 : _FP_FRACBITS_Q-(_FP_IMPLBIT_Q != 0)-_FP_W_TYPE_SIZE;
+    unsigned long frac0 : _FP_W_TYPE_SIZE;
+#else
+    unsigned long frac0 : _FP_W_TYPE_SIZE;
+    unsigned long frac1 : _FP_FRACBITS_Q-(_FP_IMPLBIT_Q != 0)-_FP_W_TYPE_SIZE;
+    unsigned exp   : _FP_EXPBITS_Q;
+    unsigned sign  : 1;
+#endif
+  } bits;
+};
+
+#define FP_DECL_Q(X)		_FP_DECL(2,X)
+#define FP_UNPACK_RAW_Q(X,val)	_FP_UNPACK_RAW_2(Q,X,val)
+#define FP_UNPACK_RAW_QP(X,val)	_FP_UNPACK_RAW_2_P(Q,X,val)
+#define FP_PACK_RAW_Q(val,X)	_FP_PACK_RAW_2(Q,val,X)
+#define FP_PACK_RAW_QP(val,X)		\
+  do {					\
+    if (!FP_INHIBIT_RESULTS)		\
+      _FP_PACK_RAW_2_P(Q,val,X);	\
+  } while (0)
+
+#define FP_UNPACK_Q(X,val)		\
+  do {					\
+    _FP_UNPACK_RAW_2(Q,X,val);		\
+    _FP_UNPACK_CANONICAL(Q,2,X);	\
+  } while (0)
+
+#define FP_UNPACK_QP(X,val)		\
+  do {					\
+    _FP_UNPACK_RAW_2_P(Q,X,val);	\
+    _FP_UNPACK_CANONICAL(Q,2,X);	\
+  } while (0)
+
+#define FP_PACK_Q(val,X)		\
+  do {					\
+    _FP_PACK_CANONICAL(Q,2,X);		\
+    _FP_PACK_RAW_2(Q,val,X);		\
+  } while (0)
+
+#define FP_PACK_QP(val,X)		\
+  do {					\
+    _FP_PACK_CANONICAL(Q,2,X);		\
+    if (!FP_INHIBIT_RESULTS)		\
+      _FP_PACK_RAW_2_P(Q,val,X);	\
+  } while (0)
+
+#define FP_ISSIGNAN_Q(X)		_FP_ISSIGNAN(Q,2,X)
+#define FP_NEG_Q(R,X)			_FP_NEG(Q,2,R,X)
+#define FP_ADD_Q(R,X,Y)			_FP_ADD(Q,2,R,X,Y)
+#define FP_SUB_Q(R,X,Y)			_FP_SUB(Q,2,R,X,Y)
+#define FP_MUL_Q(R,X,Y)			_FP_MUL(Q,2,R,X,Y)
+#define FP_DIV_Q(R,X,Y)			_FP_DIV(Q,2,R,X,Y)
+#define FP_SQRT_Q(R,X)			_FP_SQRT(Q,2,R,X)
+#define _FP_SQRT_MEAT_Q(R,S,T,X,Q)	_FP_SQRT_MEAT_2(R,S,T,X,Q)
+
+#define FP_CMP_Q(r,X,Y,un)	_FP_CMP(Q,2,r,X,Y,un)
+#define FP_CMP_EQ_Q(r,X,Y)	_FP_CMP_EQ(Q,2,r,X,Y)
+
+#define FP_TO_INT_Q(r,X,rsz,rsg)	_FP_TO_INT(Q,2,r,X,rsz,rsg)
+#define FP_TO_INT_ROUND_Q(r,X,rsz,rsg)	_FP_TO_INT_ROUND(Q,2,r,X,rsz,rsg)
+#define FP_FROM_INT_Q(X,r,rs,rt)	_FP_FROM_INT(Q,2,X,r,rs,rt)
+
+#define _FP_FRAC_HIGH_Q(X)	_FP_FRAC_HIGH_2(X)
+#define _FP_FRAC_HIGH_RAW_Q(X)	_FP_FRAC_HIGH_2(X)
+
+#endif /* not _FP_W_TYPE_SIZE < 64 */
+
+#endif /* __MATH_EMU_QUAD_H__ */
diff --git a/include/math-emu/single.h b/include/math-emu/single.h
new file mode 100644
index 00000000..87f90b0f
--- /dev/null
+++ b/include/math-emu/single.h
@@ -0,0 +1,116 @@
+/* Software floating-point emulation.
+   Definitions for IEEE Single Precision.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz),
+		  David S. Miller (davem@redhat.com) and
+		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef    __MATH_EMU_SINGLE_H__
+#define    __MATH_EMU_SINGLE_H__
+
+#if _FP_W_TYPE_SIZE < 32
+#error "Here's a nickel kid.  Go buy yourself a real computer."
+#endif
+
+#define _FP_FRACBITS_S		24
+#define _FP_FRACXBITS_S		(_FP_W_TYPE_SIZE - _FP_FRACBITS_S)
+#define _FP_WFRACBITS_S		(_FP_WORKBITS + _FP_FRACBITS_S)
+#define _FP_WFRACXBITS_S	(_FP_W_TYPE_SIZE - _FP_WFRACBITS_S)
+#define _FP_EXPBITS_S		8
+#define _FP_EXPBIAS_S		127
+#define _FP_EXPMAX_S		255
+#define _FP_QNANBIT_S		((_FP_W_TYPE)1 << (_FP_FRACBITS_S-2))
+#define _FP_IMPLBIT_S		((_FP_W_TYPE)1 << (_FP_FRACBITS_S-1))
+#define _FP_OVERFLOW_S		((_FP_W_TYPE)1 << (_FP_WFRACBITS_S))
+
+/* The implementation of _FP_MUL_MEAT_S and _FP_DIV_MEAT_S should be
+   chosen by the target machine.  */
+
+union _FP_UNION_S
+{
+  float flt;
+  struct {
+#if __BYTE_ORDER == __BIG_ENDIAN
+    unsigned sign : 1;
+    unsigned exp  : _FP_EXPBITS_S;
+    unsigned frac : _FP_FRACBITS_S - (_FP_IMPLBIT_S != 0);
+#else
+    unsigned frac : _FP_FRACBITS_S - (_FP_IMPLBIT_S != 0);
+    unsigned exp  : _FP_EXPBITS_S;
+    unsigned sign : 1;
+#endif
+  } bits __attribute__((packed));
+};
+
+#define FP_DECL_S(X)		_FP_DECL(1,X)
+#define FP_UNPACK_RAW_S(X,val)	_FP_UNPACK_RAW_1(S,X,val)
+#define FP_UNPACK_RAW_SP(X,val)	_FP_UNPACK_RAW_1_P(S,X,val)
+#define FP_PACK_RAW_S(val,X)	_FP_PACK_RAW_1(S,val,X)
+#define FP_PACK_RAW_SP(val,X)		\
+  do {					\
+    if (!FP_INHIBIT_RESULTS)		\
+      _FP_PACK_RAW_1_P(S,val,X);	\
+  } while (0)
+
+#define FP_UNPACK_S(X,val)		\
+  do {					\
+    _FP_UNPACK_RAW_1(S,X,val);		\
+    _FP_UNPACK_CANONICAL(S,1,X);	\
+  } while (0)
+
+#define FP_UNPACK_SP(X,val)		\
+  do {					\
+    _FP_UNPACK_RAW_1_P(S,X,val);	\
+    _FP_UNPACK_CANONICAL(S,1,X);	\
+  } while (0)
+
+#define FP_PACK_S(val,X)		\
+  do {					\
+    _FP_PACK_CANONICAL(S,1,X);		\
+    _FP_PACK_RAW_1(S,val,X);		\
+  } while (0)
+
+#define FP_PACK_SP(val,X)		\
+  do {					\
+    _FP_PACK_CANONICAL(S,1,X);		\
+    if (!FP_INHIBIT_RESULTS)		\
+      _FP_PACK_RAW_1_P(S,val,X);	\
+  } while (0)
+
+#define FP_ISSIGNAN_S(X)		_FP_ISSIGNAN(S,1,X)
+#define FP_NEG_S(R,X)			_FP_NEG(S,1,R,X)
+#define FP_ADD_S(R,X,Y)			_FP_ADD(S,1,R,X,Y)
+#define FP_SUB_S(R,X,Y)			_FP_SUB(S,1,R,X,Y)
+#define FP_MUL_S(R,X,Y)			_FP_MUL(S,1,R,X,Y)
+#define FP_DIV_S(R,X,Y)			_FP_DIV(S,1,R,X,Y)
+#define FP_SQRT_S(R,X)			_FP_SQRT(S,1,R,X)
+#define _FP_SQRT_MEAT_S(R,S,T,X,Q)	_FP_SQRT_MEAT_1(R,S,T,X,Q)
+
+#define FP_CMP_S(r,X,Y,un)	_FP_CMP(S,1,r,X,Y,un)
+#define FP_CMP_EQ_S(r,X,Y)	_FP_CMP_EQ(S,1,r,X,Y)
+
+#define FP_TO_INT_S(r,X,rsz,rsg)	_FP_TO_INT(S,1,r,X,rsz,rsg)
+#define FP_TO_INT_ROUND_S(r,X,rsz,rsg)	_FP_TO_INT_ROUND(S,1,r,X,rsz,rsg)
+#define FP_FROM_INT_S(X,r,rs,rt)	_FP_FROM_INT(S,1,X,r,rs,rt)
+
+#define _FP_FRAC_HIGH_S(X)	_FP_FRAC_HIGH_1(X)
+#define _FP_FRAC_HIGH_RAW_S(X)	_FP_FRAC_HIGH_1(X)
+
+#endif /* __MATH_EMU_SINGLE_H__ */
diff --git a/include/math-emu/soft-fp.h b/include/math-emu/soft-fp.h
new file mode 100644
index 00000000..3f284bc0
--- /dev/null
+++ b/include/math-emu/soft-fp.h
@@ -0,0 +1,207 @@
+/* Software floating-point emulation.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz),
+		  David S. Miller (davem@redhat.com) and
+		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef __MATH_EMU_SOFT_FP_H__
+#define __MATH_EMU_SOFT_FP_H__
+
+#include <asm/sfp-machine.h>
+
+/* Allow sfp-machine to have its own byte order definitions. */
+#ifndef __BYTE_ORDER
+#include <endian.h>
+#endif
+
+#define _FP_WORKBITS		3
+#define _FP_WORK_LSB		((_FP_W_TYPE)1 << 3)
+#define _FP_WORK_ROUND		((_FP_W_TYPE)1 << 2)
+#define _FP_WORK_GUARD		((_FP_W_TYPE)1 << 1)
+#define _FP_WORK_STICKY		((_FP_W_TYPE)1 << 0)
+
+#ifndef FP_RND_NEAREST
+# define FP_RND_NEAREST		0
+# define FP_RND_ZERO		1
+# define FP_RND_PINF		2
+# define FP_RND_MINF		3
+#ifndef FP_ROUNDMODE
+# define FP_ROUNDMODE		FP_RND_NEAREST
+#endif
+#endif
+
+/* By default don't care about exceptions. */
+#ifndef FP_EX_INVALID
+#define FP_EX_INVALID		0
+#endif
+#ifndef FP_EX_INVALID_SNAN
+#define FP_EX_INVALID_SNAN	0
+#endif
+/* inf - inf */
+#ifndef FP_EX_INVALID_ISI
+#define FP_EX_INVALID_ISI	0
+#endif
+/* inf / inf */
+#ifndef FP_EX_INVALID_IDI
+#define FP_EX_INVALID_IDI	0
+#endif
+/* 0 / 0 */
+#ifndef FP_EX_INVALID_ZDZ
+#define FP_EX_INVALID_ZDZ	0
+#endif
+/* inf * 0 */
+#ifndef FP_EX_INVALID_IMZ
+#define FP_EX_INVALID_IMZ	0
+#endif
+#ifndef FP_EX_OVERFLOW
+#define FP_EX_OVERFLOW		0
+#endif
+#ifndef FP_EX_UNDERFLOW
+#define FP_EX_UNDERFLOW		
+#endif
+#ifndef FP_EX_DIVZERO
+#define FP_EX_DIVZERO		0
+#endif
+#ifndef FP_EX_INEXACT
+#define FP_EX_INEXACT		0
+#endif
+#ifndef FP_EX_DENORM
+#define FP_EX_DENORM		0
+#endif
+
+#ifdef _FP_DECL_EX
+#define FP_DECL_EX					\
+  int _fex = 0;						\
+  _FP_DECL_EX
+#else
+#define FP_DECL_EX int _fex = 0
+#endif
+  
+#ifndef FP_INIT_ROUNDMODE
+#define FP_INIT_ROUNDMODE do {} while (0)
+#endif
+
+#ifndef FP_HANDLE_EXCEPTIONS
+#define FP_HANDLE_EXCEPTIONS do {} while (0)
+#endif
+
+/* By default we never flush denormal input operands to signed zero. */
+#ifndef FP_DENORM_ZERO
+#define FP_DENORM_ZERO 0
+#endif
+
+#ifndef FP_INHIBIT_RESULTS
+/* By default we write the results always.
+ * sfp-machine may override this and e.g.
+ * check if some exceptions are unmasked
+ * and inhibit it in such a case.
+ */
+#define FP_INHIBIT_RESULTS 0
+#endif
+
+#ifndef FP_TRAPPING_EXCEPTIONS
+#define FP_TRAPPING_EXCEPTIONS 0
+#endif
+
+#define FP_SET_EXCEPTION(ex)				\
+  _fex |= (ex)
+  
+#define FP_UNSET_EXCEPTION(ex)				\
+  _fex &= ~(ex)
+
+#define FP_CUR_EXCEPTIONS				\
+  (_fex)
+
+#define FP_CLEAR_EXCEPTIONS				\
+  _fex = 0
+
+#define _FP_ROUND_NEAREST(wc, X)			\
+do {							\
+    if ((_FP_FRAC_LOW_##wc(X) & 15) != _FP_WORK_ROUND)	\
+      _FP_FRAC_ADDI_##wc(X, _FP_WORK_ROUND);		\
+} while (0)
+
+#define _FP_ROUND_ZERO(wc, X)		0
+
+#define _FP_ROUND_PINF(wc, X)				\
+do {							\
+    if (!X##_s && (_FP_FRAC_LOW_##wc(X) & 7))		\
+      _FP_FRAC_ADDI_##wc(X, _FP_WORK_LSB);		\
+} while (0)
+
+#define _FP_ROUND_MINF(wc, X)				\
+do {							\
+    if (X##_s && (_FP_FRAC_LOW_##wc(X) & 7))		\
+      _FP_FRAC_ADDI_##wc(X, _FP_WORK_LSB);		\
+} while (0)
+
+#define _FP_ROUND(wc, X)			\
+do {						\
+	if (_FP_FRAC_LOW_##wc(X) & 7)		\
+	  FP_SET_EXCEPTION(FP_EX_INEXACT);	\
+	switch (FP_ROUNDMODE)			\
+	{					\
+	  case FP_RND_NEAREST:			\
+	    _FP_ROUND_NEAREST(wc,X);		\
+	    break;				\
+	  case FP_RND_ZERO:			\
+	    _FP_ROUND_ZERO(wc,X);		\
+	    break;				\
+	  case FP_RND_PINF:			\
+	    _FP_ROUND_PINF(wc,X);		\
+	    break;				\
+	  case FP_RND_MINF:			\
+	    _FP_ROUND_MINF(wc,X);		\
+	    break;				\
+	}					\
+} while (0)
+
+#define FP_CLS_NORMAL		0
+#define FP_CLS_ZERO		1
+#define FP_CLS_INF		2
+#define FP_CLS_NAN		3
+
+#define _FP_CLS_COMBINE(x,y)	(((x) << 2) | (y))
+
+#include <math-emu/op-1.h>
+#include <math-emu/op-2.h>
+#include <math-emu/op-4.h>
+#include <math-emu/op-8.h>
+#include <math-emu/op-common.h>
+
+/* Sigh.  Silly things longlong.h needs.  */
+#define UWtype		_FP_W_TYPE
+#define W_TYPE_SIZE	_FP_W_TYPE_SIZE
+
+typedef int SItype __attribute__((mode(SI)));
+typedef int DItype __attribute__((mode(DI)));
+typedef unsigned int USItype __attribute__((mode(SI)));
+typedef unsigned int UDItype __attribute__((mode(DI)));
+#if _FP_W_TYPE_SIZE == 32
+typedef unsigned int UHWtype __attribute__((mode(HI)));
+#elif _FP_W_TYPE_SIZE == 64
+typedef USItype UHWtype;
+#endif
+
+#ifndef umul_ppmm
+#include <stdlib/longlong.h>
+#endif
+
+#endif /* __MATH_EMU_SOFT_FP_H__ */
diff --git a/include/media/adp1653.h b/include/media/adp1653.h
new file mode 100644
index 00000000..50a1af88
--- /dev/null
+++ b/include/media/adp1653.h
@@ -0,0 +1,126 @@
+/*
+ * include/media/adp1653.h
+ *
+ * Copyright (C) 2008--2011 Nokia Corporation
+ *
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * Contributors:
+ *	Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *	Tuukka Toivonen <tuukkat76@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef ADP1653_H
+#define ADP1653_H
+
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-subdev.h>
+
+#define ADP1653_NAME				"adp1653"
+#define ADP1653_I2C_ADDR			(0x60 >> 1)
+
+/* Register definitions */
+#define ADP1653_REG_OUT_SEL			0x00
+#define ADP1653_REG_OUT_SEL_HPLED_TORCH_MIN	0x01
+#define ADP1653_REG_OUT_SEL_HPLED_TORCH_MAX	0x0b
+#define ADP1653_REG_OUT_SEL_HPLED_FLASH_MIN	0x0c
+#define ADP1653_REG_OUT_SEL_HPLED_FLASH_MAX	0x1f
+#define ADP1653_REG_OUT_SEL_HPLED_SHIFT		3
+#define ADP1653_REG_OUT_SEL_ILED_MAX		0x07
+#define ADP1653_REG_OUT_SEL_ILED_SHIFT		0
+
+#define ADP1653_REG_CONFIG			0x01
+#define ADP1653_REG_CONFIG_TMR_CFG		(1 << 4)
+#define ADP1653_REG_CONFIG_TMR_SET_MAX		0x0f
+#define ADP1653_REG_CONFIG_TMR_SET_SHIFT	0
+
+#define ADP1653_REG_SW_STROBE			0x02
+#define ADP1653_REG_SW_STROBE_SW_STROBE		(1 << 0)
+
+#define ADP1653_REG_FAULT			0x03
+#define ADP1653_REG_FAULT_FLT_SCP		(1 << 3)
+#define ADP1653_REG_FAULT_FLT_OT		(1 << 2)
+#define ADP1653_REG_FAULT_FLT_TMR		(1 << 1)
+#define ADP1653_REG_FAULT_FLT_OV		(1 << 0)
+
+#define ADP1653_INDICATOR_INTENSITY_MIN		0
+#define ADP1653_INDICATOR_INTENSITY_STEP	2500
+#define ADP1653_INDICATOR_INTENSITY_MAX		\
+	(ADP1653_REG_OUT_SEL_ILED_MAX * ADP1653_INDICATOR_INTENSITY_STEP)
+#define ADP1653_INDICATOR_INTENSITY_uA_TO_REG(a) \
+	((a) / ADP1653_INDICATOR_INTENSITY_STEP)
+#define ADP1653_INDICATOR_INTENSITY_REG_TO_uA(a) \
+	((a) * ADP1653_INDICATOR_INTENSITY_STEP)
+
+#define ADP1653_FLASH_INTENSITY_BASE		35
+#define ADP1653_FLASH_INTENSITY_STEP		15
+#define ADP1653_FLASH_INTENSITY_MIN					\
+	(ADP1653_FLASH_INTENSITY_BASE					\
+	 + ADP1653_REG_OUT_SEL_HPLED_FLASH_MIN * ADP1653_FLASH_INTENSITY_STEP)
+#define ADP1653_FLASH_INTENSITY_MAX			\
+	(ADP1653_FLASH_INTENSITY_MIN +			\
+	 (ADP1653_REG_OUT_SEL_HPLED_FLASH_MAX -		\
+	  ADP1653_REG_OUT_SEL_HPLED_FLASH_MIN + 1) *	\
+	 ADP1653_FLASH_INTENSITY_STEP)
+
+#define ADP1653_FLASH_INTENSITY_mA_TO_REG(a)				\
+	((a) < ADP1653_FLASH_INTENSITY_BASE ? 0 :			\
+	 (((a) - ADP1653_FLASH_INTENSITY_BASE) / ADP1653_FLASH_INTENSITY_STEP))
+#define ADP1653_FLASH_INTENSITY_REG_TO_mA(a)		\
+	((a) * ADP1653_FLASH_INTENSITY_STEP + ADP1653_FLASH_INTENSITY_BASE)
+
+#define ADP1653_TORCH_INTENSITY_MIN					\
+	(ADP1653_FLASH_INTENSITY_BASE					\
+	 + ADP1653_REG_OUT_SEL_HPLED_TORCH_MIN * ADP1653_FLASH_INTENSITY_STEP)
+#define ADP1653_TORCH_INTENSITY_MAX			\
+	(ADP1653_TORCH_INTENSITY_MIN +			\
+	 (ADP1653_REG_OUT_SEL_HPLED_TORCH_MAX -		\
+	  ADP1653_REG_OUT_SEL_HPLED_TORCH_MIN + 1) *	\
+	 ADP1653_FLASH_INTENSITY_STEP)
+
+struct adp1653_platform_data {
+	int (*power)(struct v4l2_subdev *sd, int on);
+
+	u32 max_flash_timeout;		/* flash light timeout in us */
+	u32 max_flash_intensity;	/* led intensity, flash mode */
+	u32 max_torch_intensity;	/* led intensity, torch mode */
+	u32 max_indicator_intensity;	/* indicator led intensity */
+};
+
+#define to_adp1653_flash(sd)	container_of(sd, struct adp1653_flash, subdev)
+
+struct adp1653_flash {
+	struct v4l2_subdev subdev;
+	struct adp1653_platform_data *platform_data;
+
+	struct v4l2_ctrl_handler ctrls;
+	struct v4l2_ctrl *led_mode;
+	struct v4l2_ctrl *flash_timeout;
+	struct v4l2_ctrl *flash_intensity;
+	struct v4l2_ctrl *torch_intensity;
+	struct v4l2_ctrl *indicator_intensity;
+
+	struct mutex power_lock;
+	int power_count;
+	int fault;
+};
+
+#endif /* ADP1653_H */
diff --git a/include/media/adv7183.h b/include/media/adv7183.h
new file mode 100644
index 00000000..c5c2d377
--- /dev/null
+++ b/include/media/adv7183.h
@@ -0,0 +1,47 @@
+/*
+ * adv7183.h - definition for adv7183 inputs and outputs
+ *
+ * Copyright (c) 2011 Analog Devices Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _ADV7183_H_
+#define _ADV7183_H_
+
+/* ADV7183 HW inputs */
+#define ADV7183_COMPOSITE0  0  /* CVBS in on AIN1 */
+#define ADV7183_COMPOSITE1  1  /* CVBS in on AIN2 */
+#define ADV7183_COMPOSITE2  2  /* CVBS in on AIN3 */
+#define ADV7183_COMPOSITE3  3  /* CVBS in on AIN4 */
+#define ADV7183_COMPOSITE4  4  /* CVBS in on AIN5 */
+#define ADV7183_COMPOSITE5  5  /* CVBS in on AIN6 */
+#define ADV7183_COMPOSITE6  6  /* CVBS in on AIN7 */
+#define ADV7183_COMPOSITE7  7  /* CVBS in on AIN8 */
+#define ADV7183_COMPOSITE8  8  /* CVBS in on AIN9 */
+#define ADV7183_COMPOSITE9  9  /* CVBS in on AIN10 */
+#define ADV7183_COMPOSITE10 10 /* CVBS in on AIN11 */
+
+#define ADV7183_SVIDEO0     11 /* Y on AIN1, C on AIN4 */
+#define ADV7183_SVIDEO1     12 /* Y on AIN2, C on AIN5 */
+#define ADV7183_SVIDEO2     13 /* Y on AIN3, C on AIN6 */
+
+#define ADV7183_COMPONENT0  14 /* Y on AIN1, Pr on AIN4, Pb on AIN5 */
+#define ADV7183_COMPONENT1  15 /* Y on AIN2, Pr on AIN3, Pb on AIN6 */
+
+/* ADV7183 HW outputs */
+#define ADV7183_8BIT_OUT    0
+#define ADV7183_16BIT_OUT   1
+
+#endif
diff --git a/include/media/adv7343.h b/include/media/adv7343.h
new file mode 100644
index 00000000..d6f8a4e1
--- /dev/null
+++ b/include/media/adv7343.h
@@ -0,0 +1,23 @@
+/*
+ * ADV7343 header file
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed .as is. WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef ADV7343_H
+#define ADV7343_H
+
+#define ADV7343_COMPOSITE_ID	(0)
+#define ADV7343_COMPONENT_ID	(1)
+#define ADV7343_SVIDEO_ID	(2)
+
+#endif				/* End of #ifndef ADV7343_H */
diff --git a/include/media/ak881x.h b/include/media/ak881x.h
new file mode 100644
index 00000000..b7f2add5
--- /dev/null
+++ b/include/media/ak881x.h
@@ -0,0 +1,25 @@
+/*
+ * Header for AK8813 / AK8814 TV-ecoders from Asahi Kasei Microsystems Co., Ltd. (AKM)
+ *
+ * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef AK881X_H
+#define AK881X_H
+
+#define AK881X_IF_MODE_MASK	(3 << 0)
+#define AK881X_IF_MODE_BT656	(0 << 0)
+#define AK881X_IF_MODE_MASTER	(1 << 0)
+#define AK881X_IF_MODE_SLAVE	(2 << 0)
+#define AK881X_FIELD		(1 << 2)
+#define AK881X_COMPONENT	(1 << 3)
+
+struct ak881x_pdata {
+	unsigned long flags;
+};
+
+#endif
diff --git a/include/media/as3645a.h b/include/media/as3645a.h
new file mode 100644
index 00000000..5075496d
--- /dev/null
+++ b/include/media/as3645a.h
@@ -0,0 +1,71 @@
+/*
+ * include/media/as3645a.h
+ *
+ * Copyright (C) 2008-2011 Nokia Corporation
+ *
+ * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __AS3645A_H__
+#define __AS3645A_H__
+
+#include <media/v4l2-subdev.h>
+
+#define AS3645A_NAME				"as3645a"
+#define AS3645A_I2C_ADDR			(0x60 >> 1) /* W:0x60, R:0x61 */
+
+#define AS3645A_FLASH_TIMEOUT_MIN		100000	/* us */
+#define AS3645A_FLASH_TIMEOUT_MAX		850000
+#define AS3645A_FLASH_TIMEOUT_STEP		50000
+
+#define AS3645A_FLASH_INTENSITY_MIN		200	/* mA */
+#define AS3645A_FLASH_INTENSITY_MAX_1LED	500
+#define AS3645A_FLASH_INTENSITY_MAX_2LEDS	400
+#define AS3645A_FLASH_INTENSITY_STEP		20
+
+#define AS3645A_TORCH_INTENSITY_MIN		20	/* mA */
+#define AS3645A_TORCH_INTENSITY_MAX		160
+#define AS3645A_TORCH_INTENSITY_STEP		20
+
+#define AS3645A_INDICATOR_INTENSITY_MIN		0	/* uA */
+#define AS3645A_INDICATOR_INTENSITY_MAX		10000
+#define AS3645A_INDICATOR_INTENSITY_STEP	2500
+
+/*
+ * as3645a_platform_data - Flash controller platform data
+ * @set_power:	Set power callback
+ * @vref:	VREF offset (0=0V, 1=+0.3V, 2=-0.3V, 3=+0.6V)
+ * @peak:	Inductor peak current limit (0=1.25A, 1=1.5A, 2=1.75A, 3=2.0A)
+ * @ext_strobe:	True if external flash strobe can be used
+ * @flash_max_current:	Max flash current (mA, <= AS3645A_FLASH_INTENSITY_MAX)
+ * @torch_max_current:	Max torch current (mA, >= AS3645A_TORCH_INTENSITY_MAX)
+ * @timeout_max:	Max flash timeout (us, <= AS3645A_FLASH_TIMEOUT_MAX)
+ */
+struct as3645a_platform_data {
+	int (*set_power)(struct v4l2_subdev *subdev, int on);
+	unsigned int vref;
+	unsigned int peak;
+	bool ext_strobe;
+
+	/* Flash and torch currents and timeout limits */
+	unsigned int flash_max_current;
+	unsigned int torch_max_current;
+	unsigned int timeout_max;
+};
+
+#endif /* __AS3645A_H__ */
diff --git a/include/media/atmel-isi.h b/include/media/atmel-isi.h
new file mode 100644
index 00000000..65682307
--- /dev/null
+++ b/include/media/atmel-isi.h
@@ -0,0 +1,121 @@
+/*
+ * Register definitions for the Atmel Image Sensor Interface.
+ *
+ * Copyright (C) 2011 Atmel Corporation
+ * Josh Wu, <josh.wu@atmel.com>
+ *
+ * Based on previous work by Lars Haring, <lars.haring@atmel.com>
+ * and Sedji Gaouaou
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ATMEL_ISI_H__
+#define __ATMEL_ISI_H__
+
+#include <linux/types.h>
+
+/* ISI_V2 register offsets */
+#define ISI_CFG1				0x0000
+#define ISI_CFG2				0x0004
+#define ISI_PSIZE				0x0008
+#define ISI_PDECF				0x000c
+#define ISI_Y2R_SET0				0x0010
+#define ISI_Y2R_SET1				0x0014
+#define ISI_R2Y_SET0				0x0018
+#define ISI_R2Y_SET1				0x001C
+#define ISI_R2Y_SET2				0x0020
+#define ISI_CTRL				0x0024
+#define ISI_STATUS				0x0028
+#define ISI_INTEN				0x002C
+#define ISI_INTDIS				0x0030
+#define ISI_INTMASK				0x0034
+#define ISI_DMA_CHER				0x0038
+#define ISI_DMA_CHDR				0x003C
+#define ISI_DMA_CHSR				0x0040
+#define ISI_DMA_P_ADDR				0x0044
+#define ISI_DMA_P_CTRL				0x0048
+#define ISI_DMA_P_DSCR				0x004C
+#define ISI_DMA_C_ADDR				0x0050
+#define ISI_DMA_C_CTRL				0x0054
+#define ISI_DMA_C_DSCR				0x0058
+
+/* Bitfields in CFG1 */
+#define ISI_CFG1_HSYNC_POL_ACTIVE_LOW		(1 << 2)
+#define ISI_CFG1_VSYNC_POL_ACTIVE_LOW		(1 << 3)
+#define ISI_CFG1_PIXCLK_POL_ACTIVE_FALLING	(1 << 4)
+#define ISI_CFG1_EMB_SYNC			(1 << 6)
+#define ISI_CFG1_CRC_SYNC			(1 << 7)
+/* Constants for FRATE(ISI_V2) */
+#define		ISI_CFG1_FRATE_CAPTURE_ALL	(0 << 8)
+#define		ISI_CFG1_FRATE_DIV_2		(1 << 8)
+#define		ISI_CFG1_FRATE_DIV_3		(2 << 8)
+#define		ISI_CFG1_FRATE_DIV_4		(3 << 8)
+#define		ISI_CFG1_FRATE_DIV_5		(4 << 8)
+#define		ISI_CFG1_FRATE_DIV_6		(5 << 8)
+#define		ISI_CFG1_FRATE_DIV_7		(6 << 8)
+#define		ISI_CFG1_FRATE_DIV_8		(7 << 8)
+#define ISI_CFG1_DISCR				(1 << 11)
+#define ISI_CFG1_FULL_MODE			(1 << 12)
+
+/* Bitfields in CFG2 */
+#define ISI_CFG2_GRAYSCALE			(1 << 13)
+/* Constants for YCC_SWAP(ISI_V2) */
+#define		ISI_CFG2_YCC_SWAP_DEFAULT	(0 << 28)
+#define		ISI_CFG2_YCC_SWAP_MODE_1	(1 << 28)
+#define		ISI_CFG2_YCC_SWAP_MODE_2	(2 << 28)
+#define		ISI_CFG2_YCC_SWAP_MODE_3	(3 << 28)
+#define ISI_CFG2_IM_VSIZE_OFFSET		0
+#define ISI_CFG2_IM_HSIZE_OFFSET		16
+#define ISI_CFG2_IM_VSIZE_MASK		(0x7FF << ISI_CFG2_IM_VSIZE_OFFSET)
+#define ISI_CFG2_IM_HSIZE_MASK		(0x7FF << ISI_CFG2_IM_HSIZE_OFFSET)
+
+/* Bitfields in CTRL */
+/* Also using in SR(ISI_V2) */
+#define ISI_CTRL_EN				(1 << 0)
+#define ISI_CTRL_CDC				(1 << 8)
+/* Also using in SR/IER/IDR/IMR(ISI_V2) */
+#define ISI_CTRL_DIS				(1 << 1)
+#define ISI_CTRL_SRST				(1 << 2)
+
+/* Bitfields in SR */
+#define ISI_SR_SIP				(1 << 19)
+/* Also using in SR/IER/IDR/IMR */
+#define ISI_SR_VSYNC				(1 << 10)
+#define ISI_SR_PXFR_DONE			(1 << 16)
+#define ISI_SR_CXFR_DONE			(1 << 17)
+#define ISI_SR_P_OVR				(1 << 24)
+#define ISI_SR_C_OVR				(1 << 25)
+#define ISI_SR_CRC_ERR				(1 << 26)
+#define ISI_SR_FR_OVR				(1 << 27)
+
+/* Bitfields in DMA_C_CTRL & in DMA_P_CTRL */
+#define ISI_DMA_CTRL_FETCH			(1 << 0)
+#define ISI_DMA_CTRL_WB				(1 << 1)
+#define ISI_DMA_CTRL_IEN			(1 << 2)
+#define ISI_DMA_CTRL_DONE			(1 << 3)
+
+/* Bitfields in DMA_CHSR/CHER/CHDR */
+#define ISI_DMA_CHSR_P_CH			(1 << 0)
+#define ISI_DMA_CHSR_C_CH			(1 << 1)
+
+/* Definition for isi_platform_data */
+#define ISI_DATAWIDTH_8				0x01
+#define ISI_DATAWIDTH_10			0x02
+
+struct isi_platform_data {
+	u8 has_emb_sync;
+	u8 emb_crc_sync;
+	u8 hsync_act_low;
+	u8 vsync_act_low;
+	u8 pclk_act_falling;
+	u8 full_mode;
+	u32 data_width_flags;
+	/* Using for ISI_CFG1 */
+	u32 frate;
+	/* Using for ISI_MCK */
+	u32 mck_hz;
+};
+
+#endif /* __ATMEL_ISI_H__ */
diff --git a/include/media/blackfin/bfin_capture.h b/include/media/blackfin/bfin_capture.h
new file mode 100644
index 00000000..2038a8a3
--- /dev/null
+++ b/include/media/blackfin/bfin_capture.h
@@ -0,0 +1,37 @@
+#ifndef _BFIN_CAPTURE_H_
+#define _BFIN_CAPTURE_H_
+
+#include <linux/i2c.h>
+
+struct v4l2_input;
+struct ppi_info;
+
+struct bcap_route {
+	u32 input;
+	u32 output;
+};
+
+struct bfin_capture_config {
+	/* card name */
+	char *card_name;
+	/* inputs available at the sub device */
+	struct v4l2_input *inputs;
+	/* number of inputs supported */
+	int num_inputs;
+	/* routing information for each input */
+	struct bcap_route *routes;
+	/* i2c bus adapter no */
+	int i2c_adapter_id;
+	/* i2c subdevice board info */
+	struct i2c_board_info board_info;
+	/* ppi board info */
+	const struct ppi_info *ppi_info;
+	/* ppi control */
+	unsigned long ppi_control;
+	/* ppi interrupt mask */
+	u32 int_mask;
+	/* horizontal blanking clocks */
+	int blank_clocks;
+};
+
+#endif
diff --git a/include/media/blackfin/ppi.h b/include/media/blackfin/ppi.h
new file mode 100644
index 00000000..8f72f8a0
--- /dev/null
+++ b/include/media/blackfin/ppi.h
@@ -0,0 +1,74 @@
+/*
+ * Analog Devices PPI header file
+ *
+ * Copyright (c) 2011 Analog Devices Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _PPI_H_
+#define _PPI_H_
+
+#include <linux/interrupt.h>
+
+#ifdef EPPI_EN
+#define PORT_EN EPPI_EN
+#define DMA32 0
+#define PACK_EN PACKEN
+#endif
+
+struct ppi_if;
+
+struct ppi_params {
+	int width;
+	int height;
+	int bpp;
+	unsigned long ppi_control;
+	u32 int_mask;
+	int blank_clocks;
+};
+
+struct ppi_ops {
+	int (*attach_irq)(struct ppi_if *ppi, irq_handler_t handler);
+	void (*detach_irq)(struct ppi_if *ppi);
+	int (*start)(struct ppi_if *ppi);
+	int (*stop)(struct ppi_if *ppi);
+	int (*set_params)(struct ppi_if *ppi, struct ppi_params *params);
+	void (*update_addr)(struct ppi_if *ppi, unsigned long addr);
+};
+
+enum ppi_type {
+	PPI_TYPE_PPI,
+	PPI_TYPE_EPPI,
+};
+
+struct ppi_info {
+	enum ppi_type type;
+	int dma_ch;
+	int irq_err;
+	void __iomem *base;
+	const unsigned short *pin_req;
+};
+
+struct ppi_if {
+	unsigned long ppi_control;
+	const struct ppi_ops *ops;
+	const struct ppi_info *info;
+	bool err_int;
+	void *priv;
+};
+
+struct ppi_if *ppi_create_instance(const struct ppi_info *info);
+void ppi_delete_instance(struct ppi_if *ppi);
+#endif
diff --git a/include/media/bt819.h b/include/media/bt819.h
new file mode 100644
index 00000000..8025f4bc
--- /dev/null
+++ b/include/media/bt819.h
@@ -0,0 +1,36 @@
+/*
+    bt819.h - bt819 notifications
+
+    Copyright (C) 2009 Hans Verkuil (hverkuil@xs4all.nl)
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _BT819_H_
+#define _BT819_H_
+
+#include <linux/ioctl.h>
+
+/* v4l2_device notifications. */
+
+/* Needed to reset the FIFO buffer when changing the input
+   or the video standard.
+
+   Note: these ioctls that internal to the kernel and are never called
+   from userspace. */
+#define BT819_FIFO_RESET_LOW 	_IO('b', 0)
+#define BT819_FIFO_RESET_HIGH 	_IO('b', 1)
+
+#endif
diff --git a/include/media/cs5345.h b/include/media/cs5345.h
new file mode 100644
index 00000000..6ccae24e
--- /dev/null
+++ b/include/media/cs5345.h
@@ -0,0 +1,39 @@
+/*
+    cs5345.h - definition for cs5345 inputs and outputs
+
+    Copyright (C) 2007 Hans Verkuil (hverkuil@xs4all.nl)
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _CS5345_H_
+#define _CS5345_H_
+
+/* CS5345 HW inputs */
+#define CS5345_IN_MIC 0
+#define CS5345_IN_1   1
+#define CS5345_IN_2   2
+#define CS5345_IN_3   3
+#define CS5345_IN_4   4
+#define CS5345_IN_5   5
+#define CS5345_IN_6   6
+
+#define CS5345_MCLK_1   0x00
+#define CS5345_MCLK_1_5 0x10
+#define CS5345_MCLK_2   0x20
+#define CS5345_MCLK_3   0x30
+#define CS5345_MCLK_4   0x40
+
+#endif
diff --git a/include/media/cs53l32a.h b/include/media/cs53l32a.h
new file mode 100644
index 00000000..bf76197d
--- /dev/null
+++ b/include/media/cs53l32a.h
@@ -0,0 +1,34 @@
+/*
+    cs53l32a.h - definition for cs53l32a inputs and outputs
+
+    Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl)
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _CS53L32A_H_
+#define _CS53L32A_H_
+
+/* There are 2 physical inputs, but the second input can be
+   placed in two modes, the first mode bypasses the PGA (gain),
+   the second goes through the PGA. Hence there are three
+   possible inputs to choose from. */
+
+/* CS53L32A HW inputs */
+#define CS53L32A_IN0 0
+#define CS53L32A_IN1 1
+#define CS53L32A_IN2 2
+
+#endif
diff --git a/include/media/cx2341x.h b/include/media/cx2341x.h
new file mode 100644
index 00000000..9635eeba
--- /dev/null
+++ b/include/media/cx2341x.h
@@ -0,0 +1,295 @@
+/*
+    cx23415/6/8 header containing common defines.
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef CX2341X_H
+#define CX2341X_H
+
+#include <media/v4l2-ctrls.h>
+
+enum cx2341x_port {
+	CX2341X_PORT_MEMORY    = 0,
+	CX2341X_PORT_STREAMING = 1,
+	CX2341X_PORT_SERIAL    = 2
+};
+
+enum cx2341x_cap {
+	CX2341X_CAP_HAS_SLICED_VBI = 1 << 0,
+	CX2341X_CAP_HAS_TS 	   = 1 << 1,
+	CX2341X_CAP_HAS_AC3 	   = 1 << 2,
+};
+
+struct cx2341x_mpeg_params {
+	/* misc */
+	u32 capabilities;
+	enum cx2341x_port port;
+	u16 width;
+	u16 height;
+	u16 is_50hz;
+
+	/* stream */
+	enum v4l2_mpeg_stream_type stream_type;
+	enum v4l2_mpeg_stream_vbi_fmt stream_vbi_fmt;
+	u16 stream_insert_nav_packets;
+
+	/* audio */
+	enum v4l2_mpeg_audio_sampling_freq audio_sampling_freq;
+	enum v4l2_mpeg_audio_encoding audio_encoding;
+	enum v4l2_mpeg_audio_l2_bitrate audio_l2_bitrate;
+	enum v4l2_mpeg_audio_ac3_bitrate audio_ac3_bitrate;
+	enum v4l2_mpeg_audio_mode audio_mode;
+	enum v4l2_mpeg_audio_mode_extension audio_mode_extension;
+	enum v4l2_mpeg_audio_emphasis audio_emphasis;
+	enum v4l2_mpeg_audio_crc audio_crc;
+	u32 audio_properties;
+	u16 audio_mute;
+
+	/* video */
+	enum v4l2_mpeg_video_encoding video_encoding;
+	enum v4l2_mpeg_video_aspect video_aspect;
+	u16 video_b_frames;
+	u16 video_gop_size;
+	u16 video_gop_closure;
+	enum v4l2_mpeg_video_bitrate_mode video_bitrate_mode;
+	u32 video_bitrate;
+	u32 video_bitrate_peak;
+	u16 video_temporal_decimation;
+	u16 video_mute;
+	u32 video_mute_yuv;
+
+	/* encoding filters */
+	enum v4l2_mpeg_cx2341x_video_spatial_filter_mode video_spatial_filter_mode;
+	u16 video_spatial_filter;
+	enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type video_luma_spatial_filter_type;
+	enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type video_chroma_spatial_filter_type;
+	enum v4l2_mpeg_cx2341x_video_temporal_filter_mode video_temporal_filter_mode;
+	u16 video_temporal_filter;
+	enum v4l2_mpeg_cx2341x_video_median_filter_type video_median_filter_type;
+	u16 video_luma_median_filter_top;
+	u16 video_luma_median_filter_bottom;
+	u16 video_chroma_median_filter_top;
+	u16 video_chroma_median_filter_bottom;
+};
+
+#define CX2341X_MBOX_MAX_DATA 16
+
+extern const u32 cx2341x_mpeg_ctrls[];
+typedef int (*cx2341x_mbox_func)(void *priv, u32 cmd, int in, int out,
+		u32 data[CX2341X_MBOX_MAX_DATA]);
+int cx2341x_update(void *priv, cx2341x_mbox_func func,
+		const struct cx2341x_mpeg_params *old,
+		const struct cx2341x_mpeg_params *new);
+int cx2341x_ctrl_query(const struct cx2341x_mpeg_params *params,
+		struct v4l2_queryctrl *qctrl);
+const char * const *cx2341x_ctrl_get_menu(const struct cx2341x_mpeg_params *p, u32 id);
+int cx2341x_ext_ctrls(struct cx2341x_mpeg_params *params, int busy,
+		struct v4l2_ext_controls *ctrls, unsigned int cmd);
+void cx2341x_fill_defaults(struct cx2341x_mpeg_params *p);
+void cx2341x_log_status(const struct cx2341x_mpeg_params *p, const char *prefix);
+
+struct cx2341x_handler;
+
+struct cx2341x_handler_ops {
+	/* needed for the video clock freq */
+	int (*s_audio_sampling_freq)(struct cx2341x_handler *hdl, u32 val);
+	/* needed for dualwatch */
+	int (*s_audio_mode)(struct cx2341x_handler *hdl, u32 val);
+	/* needed for setting up the video resolution */
+	int (*s_video_encoding)(struct cx2341x_handler *hdl, u32 val);
+	/* needed for setting up the sliced vbi insertion data structures */
+	int (*s_stream_vbi_fmt)(struct cx2341x_handler *hdl, u32 val);
+};
+
+struct cx2341x_handler {
+	u32 capabilities;
+	enum cx2341x_port port;
+	u16 width;
+	u16 height;
+	u16 is_50hz;
+	u32 audio_properties;
+
+	struct v4l2_ctrl_handler hdl;
+	void *priv;
+	cx2341x_mbox_func func;
+	const struct cx2341x_handler_ops *ops;
+
+	struct v4l2_ctrl *stream_vbi_fmt;
+
+	struct {
+		/* audio cluster */
+		struct v4l2_ctrl *audio_sampling_freq;
+		struct v4l2_ctrl *audio_encoding;
+		struct v4l2_ctrl *audio_l2_bitrate;
+		struct v4l2_ctrl *audio_mode;
+		struct v4l2_ctrl *audio_mode_extension;
+		struct v4l2_ctrl *audio_emphasis;
+		struct v4l2_ctrl *audio_crc;
+		struct v4l2_ctrl *audio_ac3_bitrate;
+	};
+
+	struct {
+		/* video gop cluster */
+		struct v4l2_ctrl *video_b_frames;
+		struct v4l2_ctrl *video_gop_size;
+	};
+
+	struct {
+		/* stream type cluster */
+		struct v4l2_ctrl *stream_type;
+		struct v4l2_ctrl *video_encoding;
+		struct v4l2_ctrl *video_bitrate_mode;
+		struct v4l2_ctrl *video_bitrate;
+		struct v4l2_ctrl *video_bitrate_peak;
+	};
+
+	struct {
+		/* video mute cluster */
+		struct v4l2_ctrl *video_mute;
+		struct v4l2_ctrl *video_mute_yuv;
+	};
+
+	struct {
+		/* video filter mode cluster */
+		struct v4l2_ctrl *video_spatial_filter_mode;
+		struct v4l2_ctrl *video_temporal_filter_mode;
+		struct v4l2_ctrl *video_median_filter_type;
+	};
+
+	struct {
+		/* video filter type cluster */
+		struct v4l2_ctrl *video_luma_spatial_filter_type;
+		struct v4l2_ctrl *video_chroma_spatial_filter_type;
+	};
+
+	struct  {
+		/* video filter cluster */
+		struct v4l2_ctrl *video_spatial_filter;
+		struct v4l2_ctrl *video_temporal_filter;
+	};
+
+	struct {
+		/* video median cluster */
+		struct v4l2_ctrl *video_luma_median_filter_top;
+		struct v4l2_ctrl *video_luma_median_filter_bottom;
+		struct v4l2_ctrl *video_chroma_median_filter_top;
+		struct v4l2_ctrl *video_chroma_median_filter_bottom;
+	};
+};
+
+int cx2341x_handler_init(struct cx2341x_handler *cxhdl,
+			 unsigned nr_of_controls_hint);
+void cx2341x_handler_set_50hz(struct cx2341x_handler *cxhdl, int is_50hz);
+int cx2341x_handler_setup(struct cx2341x_handler *cxhdl);
+void cx2341x_handler_set_busy(struct cx2341x_handler *cxhdl, int busy);
+
+/* Firmware names */
+#define CX2341X_FIRM_ENC_FILENAME "v4l-cx2341x-enc.fw"
+/* Decoder firmware for the cx23415 only */
+#define CX2341X_FIRM_DEC_FILENAME "v4l-cx2341x-dec.fw"
+
+/* Firmware API commands */
+
+/* MPEG decoder API, specific to the cx23415 */
+#define CX2341X_DEC_PING_FW 			0x00
+#define CX2341X_DEC_START_PLAYBACK 		0x01
+#define CX2341X_DEC_STOP_PLAYBACK 		0x02
+#define CX2341X_DEC_SET_PLAYBACK_SPEED 		0x03
+#define CX2341X_DEC_STEP_VIDEO 			0x05
+#define CX2341X_DEC_SET_DMA_BLOCK_SIZE 		0x08
+#define CX2341X_DEC_GET_XFER_INFO		0x09
+#define CX2341X_DEC_GET_DMA_STATUS		0x0a
+#define CX2341X_DEC_SCHED_DMA_FROM_HOST		0x0b
+#define CX2341X_DEC_PAUSE_PLAYBACK 		0x0d
+#define CX2341X_DEC_HALT_FW 			0x0e
+#define CX2341X_DEC_SET_STANDARD 		0x10
+#define CX2341X_DEC_GET_VERSION			0x11
+#define CX2341X_DEC_SET_STREAM_INPUT 		0x14
+#define CX2341X_DEC_GET_TIMING_INFO 		0x15
+#define CX2341X_DEC_SET_AUDIO_MODE 		0x16
+#define CX2341X_DEC_SET_EVENT_NOTIFICATION	0x17
+#define CX2341X_DEC_SET_DISPLAY_BUFFERS		0x18
+#define CX2341X_DEC_EXTRACT_VBI 		0x19
+#define CX2341X_DEC_SET_DECODER_SOURCE 		0x1a
+#define CX2341X_DEC_SET_PREBUFFERING		0x1e
+
+/* MPEG encoder API */
+#define CX2341X_ENC_PING_FW 			0x80
+#define CX2341X_ENC_START_CAPTURE 		0x81
+#define CX2341X_ENC_STOP_CAPTURE 		0x82
+#define CX2341X_ENC_SET_AUDIO_ID 		0x89
+#define CX2341X_ENC_SET_VIDEO_ID 		0x8b
+#define CX2341X_ENC_SET_PCR_ID 			0x8d
+#define CX2341X_ENC_SET_FRAME_RATE 		0x8f
+#define CX2341X_ENC_SET_FRAME_SIZE 		0x91
+#define CX2341X_ENC_SET_BIT_RATE 		0x95
+#define CX2341X_ENC_SET_GOP_PROPERTIES 		0x97
+#define CX2341X_ENC_SET_ASPECT_RATIO 		0x99
+#define CX2341X_ENC_SET_DNR_FILTER_MODE 	0x9b
+#define CX2341X_ENC_SET_DNR_FILTER_PROPS 	0x9d
+#define CX2341X_ENC_SET_CORING_LEVELS 		0x9f
+#define CX2341X_ENC_SET_SPATIAL_FILTER_TYPE 	0xa1
+#define CX2341X_ENC_SET_VBI_LINE 		0xb7
+#define CX2341X_ENC_SET_STREAM_TYPE 		0xb9
+#define CX2341X_ENC_SET_OUTPUT_PORT 		0xbb
+#define CX2341X_ENC_SET_AUDIO_PROPERTIES 	0xbd
+#define CX2341X_ENC_HALT_FW 			0xc3
+#define CX2341X_ENC_GET_VERSION			0xc4
+#define CX2341X_ENC_SET_GOP_CLOSURE 		0xc5
+#define CX2341X_ENC_GET_SEQ_END 		0xc6
+#define CX2341X_ENC_SET_PGM_INDEX_INFO 		0xc7
+#define CX2341X_ENC_SET_VBI_CONFIG		0xc8
+#define CX2341X_ENC_SET_DMA_BLOCK_SIZE 		0xc9
+#define CX2341X_ENC_GET_PREV_DMA_INFO_MB_10	0xca
+#define CX2341X_ENC_GET_PREV_DMA_INFO_MB_9	0xcb
+#define CX2341X_ENC_SCHED_DMA_TO_HOST 		0xcc
+#define CX2341X_ENC_INITIALIZE_INPUT 		0xcd
+#define CX2341X_ENC_SET_FRAME_DROP_RATE 	0xd0
+#define CX2341X_ENC_PAUSE_ENCODER 		0xd2
+#define CX2341X_ENC_REFRESH_INPUT 		0xd3
+#define CX2341X_ENC_SET_COPYRIGHT		0xd4
+#define CX2341X_ENC_SET_EVENT_NOTIFICATION 	0xd5
+#define CX2341X_ENC_SET_NUM_VSYNC_LINES 	0xd6
+#define CX2341X_ENC_SET_PLACEHOLDER 		0xd7
+#define CX2341X_ENC_MUTE_VIDEO 			0xd9
+#define CX2341X_ENC_MUTE_AUDIO 			0xda
+#define CX2341X_ENC_SET_VERT_CROP_LINE		0xdb
+#define CX2341X_ENC_MISC 			0xdc
+
+/* OSD API, specific to the cx23415 */
+#define CX2341X_OSD_GET_FRAMEBUFFER 		0x41
+#define CX2341X_OSD_GET_PIXEL_FORMAT 		0x42
+#define CX2341X_OSD_SET_PIXEL_FORMAT 		0x43
+#define CX2341X_OSD_GET_STATE 			0x44
+#define CX2341X_OSD_SET_STATE 			0x45
+#define CX2341X_OSD_GET_OSD_COORDS 		0x46
+#define CX2341X_OSD_SET_OSD_COORDS 		0x47
+#define CX2341X_OSD_GET_SCREEN_COORDS 		0x48
+#define CX2341X_OSD_SET_SCREEN_COORDS 		0x49
+#define CX2341X_OSD_GET_GLOBAL_ALPHA 		0x4a
+#define CX2341X_OSD_SET_GLOBAL_ALPHA 		0x4b
+#define CX2341X_OSD_SET_BLEND_COORDS 		0x4c
+#define CX2341X_OSD_GET_FLICKER_STATE 		0x4f
+#define CX2341X_OSD_SET_FLICKER_STATE 		0x50
+#define CX2341X_OSD_BLT_COPY 			0x52
+#define CX2341X_OSD_BLT_FILL 			0x53
+#define CX2341X_OSD_BLT_TEXT 			0x54
+#define CX2341X_OSD_SET_FRAMEBUFFER_WINDOW 	0x56
+#define CX2341X_OSD_SET_CHROMA_KEY 		0x60
+#define CX2341X_OSD_GET_ALPHA_CONTENT_INDEX 	0x61
+#define CX2341X_OSD_SET_ALPHA_CONTENT_INDEX 	0x62
+
+#endif /* CX2341X_H */
diff --git a/include/media/cx25840.h b/include/media/cx25840.h
new file mode 100644
index 00000000..783c5bdd
--- /dev/null
+++ b/include/media/cx25840.h
@@ -0,0 +1,188 @@
+/*
+    cx25840.h - definition for cx25840/1/2/3 inputs
+
+    Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl)
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _CX25840_H_
+#define _CX25840_H_
+
+/* Note that the cx25840 driver requires that the bridge driver calls the
+   v4l2_subdev's init operation in order to load the driver's firmware.
+   Without this the audio standard detection will fail and you will
+   only get mono.
+
+   Since loading the firmware is often problematic when the driver is
+   compiled into the kernel I recommend postponing calling this function
+   until the first open of the video device. Another reason for
+   postponing it is that loading this firmware takes a long time (seconds)
+   due to the slow i2c bus speed. So it will speed up the boot process if
+   you can avoid loading the fw as long as the video device isn't used. */
+
+enum cx25840_video_input {
+	/* Composite video inputs In1-In8 */
+	CX25840_COMPOSITE1 = 1,
+	CX25840_COMPOSITE2,
+	CX25840_COMPOSITE3,
+	CX25840_COMPOSITE4,
+	CX25840_COMPOSITE5,
+	CX25840_COMPOSITE6,
+	CX25840_COMPOSITE7,
+	CX25840_COMPOSITE8,
+
+	/* S-Video inputs consist of one luma input (In1-In8) ORed with one
+	   chroma input (In5-In8) */
+	CX25840_SVIDEO_LUMA1 = 0x10,
+	CX25840_SVIDEO_LUMA2 = 0x20,
+	CX25840_SVIDEO_LUMA3 = 0x30,
+	CX25840_SVIDEO_LUMA4 = 0x40,
+	CX25840_SVIDEO_LUMA5 = 0x50,
+	CX25840_SVIDEO_LUMA6 = 0x60,
+	CX25840_SVIDEO_LUMA7 = 0x70,
+	CX25840_SVIDEO_LUMA8 = 0x80,
+	CX25840_SVIDEO_CHROMA4 = 0x400,
+	CX25840_SVIDEO_CHROMA5 = 0x500,
+	CX25840_SVIDEO_CHROMA6 = 0x600,
+	CX25840_SVIDEO_CHROMA7 = 0x700,
+	CX25840_SVIDEO_CHROMA8 = 0x800,
+
+	/* S-Video aliases for common luma/chroma combinations */
+	CX25840_SVIDEO1 = 0x510,
+	CX25840_SVIDEO2 = 0x620,
+	CX25840_SVIDEO3 = 0x730,
+	CX25840_SVIDEO4 = 0x840,
+
+	/* Allow frames to specify specific input configurations */
+	CX25840_VIN1_CH1  = 0x80000000,
+	CX25840_VIN2_CH1  = 0x80000001,
+	CX25840_VIN3_CH1  = 0x80000002,
+	CX25840_VIN4_CH1  = 0x80000003,
+	CX25840_VIN5_CH1  = 0x80000004,
+	CX25840_VIN6_CH1  = 0x80000005,
+	CX25840_VIN7_CH1  = 0x80000006,
+	CX25840_VIN8_CH1  = 0x80000007,
+	CX25840_VIN4_CH2  = 0x80000000,
+	CX25840_VIN5_CH2  = 0x80000010,
+	CX25840_VIN6_CH2  = 0x80000020,
+	CX25840_NONE_CH2  = 0x80000030,
+	CX25840_VIN7_CH3  = 0x80000000,
+	CX25840_VIN8_CH3  = 0x80000040,
+	CX25840_NONE0_CH3 = 0x80000080,
+	CX25840_NONE1_CH3 = 0x800000c0,
+	CX25840_SVIDEO_ON = 0x80000100,
+	CX25840_COMPONENT_ON = 0x80000200,
+	CX25840_DIF_ON = 0x80000400,
+};
+
+enum cx25840_audio_input {
+	/* Audio inputs: serial or In4-In8 */
+	CX25840_AUDIO_SERIAL,
+	CX25840_AUDIO4 = 4,
+	CX25840_AUDIO5,
+	CX25840_AUDIO6,
+	CX25840_AUDIO7,
+	CX25840_AUDIO8,
+};
+
+enum cx25840_io_pin {
+	CX25840_PIN_DVALID_PRGM0 = 0,
+	CX25840_PIN_FIELD_PRGM1,
+	CX25840_PIN_HRESET_PRGM2,
+	CX25840_PIN_VRESET_HCTL_PRGM3,
+	CX25840_PIN_IRQ_N_PRGM4,
+	CX25840_PIN_IR_TX_PRGM6,
+	CX25840_PIN_IR_RX_PRGM5,
+	CX25840_PIN_GPIO0_PRGM8,
+	CX25840_PIN_GPIO1_PRGM9,
+	CX25840_PIN_SA_SDIN,		/* Alternate GP Input only */
+	CX25840_PIN_SA_SDOUT,		/* Alternate GP Input only */
+	CX25840_PIN_PLL_CLK_PRGM7,
+	CX25840_PIN_CHIP_SEL_VIPCLK,	/* Output only */
+};
+
+enum cx25840_io_pad {
+	/* Output pads */
+	CX25840_PAD_DEFAULT = 0,
+	CX25840_PAD_ACTIVE,
+	CX25840_PAD_VACTIVE,
+	CX25840_PAD_CBFLAG,
+	CX25840_PAD_VID_DATA_EXT0,
+	CX25840_PAD_VID_DATA_EXT1,
+	CX25840_PAD_GPO0,
+	CX25840_PAD_GPO1,
+	CX25840_PAD_GPO2,
+	CX25840_PAD_GPO3,
+	CX25840_PAD_IRQ_N,
+	CX25840_PAD_AC_SYNC,
+	CX25840_PAD_AC_SDOUT,
+	CX25840_PAD_PLL_CLK,
+	CX25840_PAD_VRESET,
+	CX25840_PAD_RESERVED,
+	/* Pads for PLL_CLK output only */
+	CX25840_PAD_XTI_X5_DLL,
+	CX25840_PAD_AUX_PLL,
+	CX25840_PAD_VID_PLL,
+	CX25840_PAD_XTI,
+	/* Input Pads */
+	CX25840_PAD_GPI0,
+	CX25840_PAD_GPI1,
+	CX25840_PAD_GPI2,
+	CX25840_PAD_GPI3,
+};
+
+enum cx25840_io_pin_strength {
+	CX25840_PIN_DRIVE_MEDIUM = 0,
+	CX25840_PIN_DRIVE_SLOW,
+	CX25840_PIN_DRIVE_FAST,
+};
+
+enum cx23885_io_pin {
+	CX23885_PIN_IR_RX_GPIO19,
+	CX23885_PIN_IR_TX_GPIO20,
+	CX23885_PIN_I2S_SDAT_GPIO21,
+	CX23885_PIN_I2S_WCLK_GPIO22,
+	CX23885_PIN_I2S_BCLK_GPIO23,
+	CX23885_PIN_IRQ_N_GPIO16,
+};
+
+enum cx23885_io_pad {
+	CX23885_PAD_IR_RX,
+	CX23885_PAD_GPIO19,
+	CX23885_PAD_IR_TX,
+	CX23885_PAD_GPIO20,
+	CX23885_PAD_I2S_SDAT,
+	CX23885_PAD_GPIO21,
+	CX23885_PAD_I2S_WCLK,
+	CX23885_PAD_GPIO22,
+	CX23885_PAD_I2S_BCLK,
+	CX23885_PAD_GPIO23,
+	CX23885_PAD_IRQ_N,
+	CX23885_PAD_GPIO16,
+};
+
+/* pvr150_workaround activates a workaround for a hardware bug that is
+   present in Hauppauge PVR-150 (and possibly PVR-500) cards that have
+   certain NTSC tuners (tveeprom tuner model numbers 85, 99 and 112). The
+   audio autodetect fails on some channels for these models and the workaround
+   is to select the audio standard explicitly. Many thanks to Hauppauge for
+   providing this information.
+   This platform data only needs to be supplied by the ivtv driver. */
+struct cx25840_platform_data {
+	int pvr150_workaround;
+};
+
+#endif
diff --git a/include/media/davinci/ccdc_types.h b/include/media/davinci/ccdc_types.h
new file mode 100644
index 00000000..5773874b
--- /dev/null
+++ b/include/media/davinci/ccdc_types.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2008-2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ **************************************************************************/
+#ifndef _CCDC_TYPES_H
+#define _CCDC_TYPES_H
+enum ccdc_pixfmt {
+	CCDC_PIXFMT_RAW,
+	CCDC_PIXFMT_YCBCR_16BIT,
+	CCDC_PIXFMT_YCBCR_8BIT
+};
+
+enum ccdc_frmfmt {
+	CCDC_FRMFMT_PROGRESSIVE,
+	CCDC_FRMFMT_INTERLACED
+};
+
+/* PIXEL ORDER IN MEMORY from LSB to MSB */
+/* only applicable for 8-bit input mode  */
+enum ccdc_pixorder {
+	CCDC_PIXORDER_YCBYCR,
+	CCDC_PIXORDER_CBYCRY,
+};
+
+enum ccdc_buftype {
+	CCDC_BUFTYPE_FLD_INTERLEAVED,
+	CCDC_BUFTYPE_FLD_SEPARATED
+};
+#endif
diff --git a/include/media/davinci/dm355_ccdc.h b/include/media/davinci/dm355_ccdc.h
new file mode 100644
index 00000000..adf2fe4b
--- /dev/null
+++ b/include/media/davinci/dm355_ccdc.h
@@ -0,0 +1,321 @@
+/*
+ * Copyright (C) 2005-2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef _DM355_CCDC_H
+#define _DM355_CCDC_H
+#include <media/davinci/ccdc_types.h>
+#include <media/davinci/vpfe_types.h>
+
+/* enum for No of pixel per line to be avg. in Black Clamping */
+enum ccdc_sample_length {
+	CCDC_SAMPLE_1PIXELS,
+	CCDC_SAMPLE_2PIXELS,
+	CCDC_SAMPLE_4PIXELS,
+	CCDC_SAMPLE_8PIXELS,
+	CCDC_SAMPLE_16PIXELS
+};
+
+/* enum for No of lines in Black Clamping */
+enum ccdc_sample_line {
+	CCDC_SAMPLE_1LINES,
+	CCDC_SAMPLE_2LINES,
+	CCDC_SAMPLE_4LINES,
+	CCDC_SAMPLE_8LINES,
+	CCDC_SAMPLE_16LINES
+};
+
+/* enum for Alaw gama width */
+enum ccdc_gamma_width {
+	CCDC_GAMMA_BITS_13_4,
+	CCDC_GAMMA_BITS_12_3,
+	CCDC_GAMMA_BITS_11_2,
+	CCDC_GAMMA_BITS_10_1,
+	CCDC_GAMMA_BITS_09_0
+};
+
+enum ccdc_colpats {
+	CCDC_RED,
+	CCDC_GREEN_RED,
+	CCDC_GREEN_BLUE,
+	CCDC_BLUE
+};
+
+struct ccdc_col_pat {
+	enum ccdc_colpats olop;
+	enum ccdc_colpats olep;
+	enum ccdc_colpats elop;
+	enum ccdc_colpats elep;
+};
+
+enum ccdc_datasft {
+	CCDC_DATA_NO_SHIFT,
+	CCDC_DATA_SHIFT_1BIT,
+	CCDC_DATA_SHIFT_2BIT,
+	CCDC_DATA_SHIFT_3BIT,
+	CCDC_DATA_SHIFT_4BIT,
+	CCDC_DATA_SHIFT_5BIT,
+	CCDC_DATA_SHIFT_6BIT
+};
+
+enum ccdc_data_size {
+	CCDC_DATA_16BITS,
+	CCDC_DATA_15BITS,
+	CCDC_DATA_14BITS,
+	CCDC_DATA_13BITS,
+	CCDC_DATA_12BITS,
+	CCDC_DATA_11BITS,
+	CCDC_DATA_10BITS,
+	CCDC_DATA_8BITS
+};
+enum ccdc_mfilt1 {
+	CCDC_NO_MEDIAN_FILTER1,
+	CCDC_AVERAGE_FILTER1,
+	CCDC_MEDIAN_FILTER1
+};
+
+enum ccdc_mfilt2 {
+	CCDC_NO_MEDIAN_FILTER2,
+	CCDC_AVERAGE_FILTER2,
+	CCDC_MEDIAN_FILTER2
+};
+
+/* structure for ALaw */
+struct ccdc_a_law {
+	/* Enable/disable A-Law */
+	unsigned char enable;
+	/* Gama Width Input */
+	enum ccdc_gamma_width gama_wd;
+};
+
+/* structure for Black Clamping */
+struct ccdc_black_clamp {
+	/* only if bClampEnable is TRUE */
+	unsigned char b_clamp_enable;
+	/* only if bClampEnable is TRUE */
+	enum ccdc_sample_length sample_pixel;
+	/* only if bClampEnable is TRUE */
+	enum ccdc_sample_line sample_ln;
+	/* only if bClampEnable is TRUE */
+	unsigned short start_pixel;
+	/* only if bClampEnable is FALSE */
+	unsigned short sgain;
+	unsigned short dc_sub;
+};
+
+/* structure for Black Level Compensation */
+struct ccdc_black_compensation {
+	/* Constant value to subtract from Red component */
+	unsigned char r;
+	/* Constant value to subtract from Gr component */
+	unsigned char gr;
+	/* Constant value to subtract from Blue component */
+	unsigned char b;
+	/* Constant value to subtract from Gb component */
+	unsigned char gb;
+};
+
+struct ccdc_float {
+	int integer;
+	unsigned int decimal;
+};
+
+#define CCDC_CSC_COEFF_TABLE_SIZE	16
+/* structure for color space converter */
+struct ccdc_csc {
+	unsigned char enable;
+	/*
+	 * S8Q5. Use 2 decimal precision, user values range from -3.00 to 3.99.
+	 * example - to use 1.03, set integer part as 1, and decimal part as 3
+	 * to use -1.03, set integer part as -1 and decimal part as 3
+	 */
+	struct ccdc_float coeff[CCDC_CSC_COEFF_TABLE_SIZE];
+};
+
+/* Structures for Vertical Defect Correction*/
+enum ccdc_vdf_csl {
+	CCDC_VDF_NORMAL,
+	CCDC_VDF_HORZ_INTERPOL_SAT,
+	CCDC_VDF_HORZ_INTERPOL
+};
+
+enum ccdc_vdf_cuda {
+	CCDC_VDF_WHOLE_LINE_CORRECT,
+	CCDC_VDF_UPPER_DISABLE
+};
+
+enum ccdc_dfc_mwr {
+	CCDC_DFC_MWR_WRITE_COMPLETE,
+	CCDC_DFC_WRITE_REG
+};
+
+enum ccdc_dfc_mrd {
+	CCDC_DFC_READ_COMPLETE,
+	CCDC_DFC_READ_REG
+};
+
+enum ccdc_dfc_ma_rst {
+	CCDC_DFC_INCR_ADDR,
+	CCDC_DFC_CLR_ADDR
+};
+
+enum ccdc_dfc_mclr {
+	CCDC_DFC_CLEAR_COMPLETE,
+	CCDC_DFC_CLEAR
+};
+
+struct ccdc_dft_corr_ctl {
+	enum ccdc_vdf_csl vdfcsl;
+	enum ccdc_vdf_cuda vdfcuda;
+	unsigned int vdflsft;
+};
+
+struct ccdc_dft_corr_mem_ctl {
+	enum ccdc_dfc_mwr dfcmwr;
+	enum ccdc_dfc_mrd dfcmrd;
+	enum ccdc_dfc_ma_rst dfcmarst;
+	enum ccdc_dfc_mclr dfcmclr;
+};
+
+#define CCDC_DFT_TABLE_SIZE	16
+/*
+ * Main Structure for vertical defect correction. Vertical defect
+ * correction can correct up to 16 defects if defects less than 16
+ * then pad the rest with 0
+ */
+struct ccdc_vertical_dft {
+	unsigned char ver_dft_en;
+	unsigned char gen_dft_en;
+	unsigned int saturation_ctl;
+	struct ccdc_dft_corr_ctl dft_corr_ctl;
+	struct ccdc_dft_corr_mem_ctl dft_corr_mem_ctl;
+	int table_size;
+	unsigned int dft_corr_horz[CCDC_DFT_TABLE_SIZE];
+	unsigned int dft_corr_vert[CCDC_DFT_TABLE_SIZE];
+	unsigned int dft_corr_sub1[CCDC_DFT_TABLE_SIZE];
+	unsigned int dft_corr_sub2[CCDC_DFT_TABLE_SIZE];
+	unsigned int dft_corr_sub3[CCDC_DFT_TABLE_SIZE];
+};
+
+struct ccdc_data_offset {
+	unsigned char horz_offset;
+	unsigned char vert_offset;
+};
+
+/*
+ * Structure for CCDC configuration parameters for raw capture mode passed
+ * by application
+ */
+struct ccdc_config_params_raw {
+	/* data shift to be applied before storing */
+	enum ccdc_datasft datasft;
+	/* data size value from 8 to 16 bits */
+	enum ccdc_data_size data_sz;
+	/* median filter for sdram */
+	enum ccdc_mfilt1 mfilt1;
+	enum ccdc_mfilt2 mfilt2;
+	/* low pass filter enable/disable */
+	unsigned char lpf_enable;
+	/* Threshold of median filter */
+	int med_filt_thres;
+	/*
+	 * horz and vertical data offset. Appliable for defect correction
+	 * and lsc
+	 */
+	struct ccdc_data_offset data_offset;
+	/* Structure for Optional A-Law */
+	struct ccdc_a_law alaw;
+	/* Structure for Optical Black Clamp */
+	struct ccdc_black_clamp blk_clamp;
+	/* Structure for Black Compensation */
+	struct ccdc_black_compensation blk_comp;
+	/* struture for vertical Defect Correction Module Configuration */
+	struct ccdc_vertical_dft vertical_dft;
+	/* structure for color space converter Module Configuration */
+	struct ccdc_csc csc;
+	/* color patters for bayer capture */
+	struct ccdc_col_pat col_pat_field0;
+	struct ccdc_col_pat col_pat_field1;
+};
+
+#ifdef __KERNEL__
+#include <linux/io.h>
+
+#define CCDC_WIN_PAL	{0, 0, 720, 576}
+#define CCDC_WIN_VGA	{0, 0, 640, 480}
+
+struct ccdc_params_ycbcr {
+	/* pixel format */
+	enum ccdc_pixfmt pix_fmt;
+	/* progressive or interlaced frame */
+	enum ccdc_frmfmt frm_fmt;
+	/* video window */
+	struct v4l2_rect win;
+	/* field id polarity */
+	enum vpfe_pin_pol fid_pol;
+	/* vertical sync polarity */
+	enum vpfe_pin_pol vd_pol;
+	/* horizontal sync polarity */
+	enum vpfe_pin_pol hd_pol;
+	/* enable BT.656 embedded sync mode */
+	int bt656_enable;
+	/* cb:y:cr:y or y:cb:y:cr in memory */
+	enum ccdc_pixorder pix_order;
+	/* interleaved or separated fields  */
+	enum ccdc_buftype buf_type;
+};
+
+/* Gain applied to Raw Bayer data */
+struct ccdc_gain {
+	unsigned short r_ye;
+	unsigned short gr_cy;
+	unsigned short gb_g;
+	unsigned short b_mg;
+};
+
+/* Structure for CCDC configuration parameters for raw capture mode */
+struct ccdc_params_raw {
+	/* pixel format */
+	enum ccdc_pixfmt pix_fmt;
+	/* progressive or interlaced frame */
+	enum ccdc_frmfmt frm_fmt;
+	/* video window */
+	struct v4l2_rect win;
+	/* field id polarity */
+	enum vpfe_pin_pol fid_pol;
+	/* vertical sync polarity */
+	enum vpfe_pin_pol vd_pol;
+	/* horizontal sync polarity */
+	enum vpfe_pin_pol hd_pol;
+	/* interleaved or separated fields */
+	enum ccdc_buftype buf_type;
+	/* Gain values */
+	struct ccdc_gain gain;
+	/* offset */
+	unsigned int ccdc_offset;
+	/* horizontal flip enable */
+	unsigned char horz_flip_enable;
+	/*
+	 * enable to store the image in inverse order in memory
+	 * (bottom to top)
+	 */
+	unsigned char image_invert_enable;
+	/* Configurable part of raw data */
+	struct ccdc_config_params_raw config_params;
+};
+
+#endif
+#endif				/* DM355_CCDC_H */
diff --git a/include/media/davinci/dm644x_ccdc.h b/include/media/davinci/dm644x_ccdc.h
new file mode 100644
index 00000000..3e178eb5
--- /dev/null
+++ b/include/media/davinci/dm644x_ccdc.h
@@ -0,0 +1,184 @@
+/*
+ * Copyright (C) 2006-2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef _DM644X_CCDC_H
+#define _DM644X_CCDC_H
+#include <media/davinci/ccdc_types.h>
+#include <media/davinci/vpfe_types.h>
+
+/* enum for No of pixel per line to be avg. in Black Clamping*/
+enum ccdc_sample_length {
+	CCDC_SAMPLE_1PIXELS,
+	CCDC_SAMPLE_2PIXELS,
+	CCDC_SAMPLE_4PIXELS,
+	CCDC_SAMPLE_8PIXELS,
+	CCDC_SAMPLE_16PIXELS
+};
+
+/* enum for No of lines in Black Clamping */
+enum ccdc_sample_line {
+	CCDC_SAMPLE_1LINES,
+	CCDC_SAMPLE_2LINES,
+	CCDC_SAMPLE_4LINES,
+	CCDC_SAMPLE_8LINES,
+	CCDC_SAMPLE_16LINES
+};
+
+/* enum for Alaw gama width */
+enum ccdc_gama_width {
+	CCDC_GAMMA_BITS_15_6,
+	CCDC_GAMMA_BITS_14_5,
+	CCDC_GAMMA_BITS_13_4,
+	CCDC_GAMMA_BITS_12_3,
+	CCDC_GAMMA_BITS_11_2,
+	CCDC_GAMMA_BITS_10_1,
+	CCDC_GAMMA_BITS_09_0
+};
+
+enum ccdc_data_size {
+	CCDC_DATA_16BITS,
+	CCDC_DATA_15BITS,
+	CCDC_DATA_14BITS,
+	CCDC_DATA_13BITS,
+	CCDC_DATA_12BITS,
+	CCDC_DATA_11BITS,
+	CCDC_DATA_10BITS,
+	CCDC_DATA_8BITS
+};
+
+/* structure for ALaw */
+struct ccdc_a_law {
+	/* Enable/disable A-Law */
+	unsigned char enable;
+	/* Gama Width Input */
+	enum ccdc_gama_width gama_wd;
+};
+
+/* structure for Black Clamping */
+struct ccdc_black_clamp {
+	unsigned char enable;
+	/* only if bClampEnable is TRUE */
+	enum ccdc_sample_length sample_pixel;
+	/* only if bClampEnable is TRUE */
+	enum ccdc_sample_line sample_ln;
+	/* only if bClampEnable is TRUE */
+	unsigned short start_pixel;
+	/* only if bClampEnable is TRUE */
+	unsigned short sgain;
+	/* only if bClampEnable is FALSE */
+	unsigned short dc_sub;
+};
+
+/* structure for Black Level Compensation */
+struct ccdc_black_compensation {
+	/* Constant value to subtract from Red component */
+	char r;
+	/* Constant value to subtract from Gr component */
+	char gr;
+	/* Constant value to subtract from Blue component */
+	char b;
+	/* Constant value to subtract from Gb component */
+	char gb;
+};
+
+/* structure for fault pixel correction */
+struct ccdc_fault_pixel {
+	/* Enable or Disable fault pixel correction */
+	unsigned char enable;
+	/* Number of fault pixel */
+	unsigned short fp_num;
+	/* Address of fault pixel table */
+	unsigned int fpc_table_addr;
+};
+
+/* Structure for CCDC configuration parameters for raw capture mode passed
+ * by application
+ */
+struct ccdc_config_params_raw {
+	/* data size value from 8 to 16 bits */
+	enum ccdc_data_size data_sz;
+	/* Structure for Optional A-Law */
+	struct ccdc_a_law alaw;
+	/* Structure for Optical Black Clamp */
+	struct ccdc_black_clamp blk_clamp;
+	/* Structure for Black Compensation */
+	struct ccdc_black_compensation blk_comp;
+	/* Structure for Fault Pixel Module Configuration */
+	struct ccdc_fault_pixel fault_pxl;
+};
+
+
+#ifdef __KERNEL__
+#include <linux/io.h>
+/* Define to enable/disable video port */
+#define FP_NUM_BYTES		4
+/* Define for extra pixel/line and extra lines/frame */
+#define NUM_EXTRAPIXELS		8
+#define NUM_EXTRALINES		8
+
+/* settings for commonly used video formats */
+#define CCDC_WIN_PAL     {0, 0, 720, 576}
+/* ntsc square pixel */
+#define CCDC_WIN_VGA	{0, 0, (640 + NUM_EXTRAPIXELS), (480 + NUM_EXTRALINES)}
+
+/* Structure for CCDC configuration parameters for raw capture mode */
+struct ccdc_params_raw {
+	/* pixel format */
+	enum ccdc_pixfmt pix_fmt;
+	/* progressive or interlaced frame */
+	enum ccdc_frmfmt frm_fmt;
+	/* video window */
+	struct v4l2_rect win;
+	/* field id polarity */
+	enum vpfe_pin_pol fid_pol;
+	/* vertical sync polarity */
+	enum vpfe_pin_pol vd_pol;
+	/* horizontal sync polarity */
+	enum vpfe_pin_pol hd_pol;
+	/* interleaved or separated fields */
+	enum ccdc_buftype buf_type;
+	/*
+	 * enable to store the image in inverse
+	 * order in memory(bottom to top)
+	 */
+	unsigned char image_invert_enable;
+	/* configurable paramaters */
+	struct ccdc_config_params_raw config_params;
+};
+
+struct ccdc_params_ycbcr {
+	/* pixel format */
+	enum ccdc_pixfmt pix_fmt;
+	/* progressive or interlaced frame */
+	enum ccdc_frmfmt frm_fmt;
+	/* video window */
+	struct v4l2_rect win;
+	/* field id polarity */
+	enum vpfe_pin_pol fid_pol;
+	/* vertical sync polarity */
+	enum vpfe_pin_pol vd_pol;
+	/* horizontal sync polarity */
+	enum vpfe_pin_pol hd_pol;
+	/* enable BT.656 embedded sync mode */
+	int bt656_enable;
+	/* cb:y:cr:y or y:cb:y:cr in memory */
+	enum ccdc_pixorder pix_order;
+	/* interleaved or separated fields  */
+	enum ccdc_buftype buf_type;
+};
+#endif
+#endif				/* _DM644X_CCDC_H */
diff --git a/include/media/davinci/isif.h b/include/media/davinci/isif.h
new file mode 100644
index 00000000..7f3d76a4
--- /dev/null
+++ b/include/media/davinci/isif.h
@@ -0,0 +1,531 @@
+/*
+ * Copyright (C) 2008-2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * isif header file
+ */
+#ifndef _ISIF_H
+#define _ISIF_H
+
+#include <media/davinci/ccdc_types.h>
+#include <media/davinci/vpfe_types.h>
+
+/* isif float type S8Q8/U8Q8 */
+struct isif_float_8 {
+	/* 8 bit integer part */
+	__u8 integer;
+	/* 8 bit decimal part */
+	__u8 decimal;
+};
+
+/* isif float type U16Q16/S16Q16 */
+struct isif_float_16 {
+	/* 16 bit integer part */
+	__u16 integer;
+	/* 16 bit decimal part */
+	__u16 decimal;
+};
+
+/************************************************************************
+ *   Vertical Defect Correction parameters
+ ***********************************************************************/
+/* Defect Correction (DFC) table entry */
+struct isif_vdfc_entry {
+	/* vertical position of defect */
+	__u16 pos_vert;
+	/* horizontal position of defect */
+	__u16 pos_horz;
+	/*
+	 * Defect level of Vertical line defect position. This is subtracted
+	 * from the data at the defect position
+	 */
+	__u8 level_at_pos;
+	/*
+	 * Defect level of the pixels upper than the vertical line defect.
+	 * This is subtracted from the data
+	 */
+	__u8 level_up_pixels;
+	/*
+	 * Defect level of the pixels lower than the vertical line defect.
+	 * This is subtracted from the data
+	 */
+	__u8 level_low_pixels;
+};
+
+#define ISIF_VDFC_TABLE_SIZE		8
+struct isif_dfc {
+	/* enable vertical defect correction */
+	__u8 en;
+	/* Defect level subtraction. Just fed through if saturating */
+#define	ISIF_VDFC_NORMAL		0
+	/*
+	 * Defect level subtraction. Horizontal interpolation ((i-2)+(i+2))/2
+	 * if data saturating
+	 */
+#define ISIF_VDFC_HORZ_INTERPOL_IF_SAT	1
+	/* Horizontal interpolation (((i-2)+(i+2))/2) */
+#define	ISIF_VDFC_HORZ_INTERPOL		2
+	/* one of the vertical defect correction modes above */
+	__u8 corr_mode;
+	/* 0 - whole line corrected, 1 - not pixels upper than the defect */
+	__u8 corr_whole_line;
+#define ISIF_VDFC_NO_SHIFT		0
+#define ISIF_VDFC_SHIFT_1		1
+#define ISIF_VDFC_SHIFT_2		2
+#define ISIF_VDFC_SHIFT_3		3
+#define ISIF_VDFC_SHIFT_4		4
+	/*
+	 * defect level shift value. level_at_pos, level_upper_pos,
+	 * and level_lower_pos can be shifted up by this value. Choose
+	 * one of the values above
+	 */
+	__u8 def_level_shift;
+	/* defect saturation level */
+	__u16 def_sat_level;
+	/* number of vertical defects. Max is ISIF_VDFC_TABLE_SIZE */
+	__u16 num_vdefects;
+	/* VDFC table ptr */
+	struct isif_vdfc_entry table[ISIF_VDFC_TABLE_SIZE];
+};
+
+struct isif_horz_bclamp {
+
+	/* Horizontal clamp disabled. Only vertical clamp value is subtracted */
+#define	ISIF_HORZ_BC_DISABLE		0
+	/*
+	 * Horizontal clamp value is calculated and subtracted from image data
+	 * along with vertical clamp value
+	 */
+#define ISIF_HORZ_BC_CLAMP_CALC_ENABLED	1
+	/*
+	 * Horizontal clamp value calculated from previous image is subtracted
+	 * from image data along with vertical clamp value.
+	 */
+#define ISIF_HORZ_BC_CLAMP_NOT_UPDATED	2
+	/* horizontal clamp mode. One of the values above */
+	__u8 mode;
+	/*
+	 * pixel value limit enable.
+	 *  0 - limit disabled
+	 *  1 - pixel value limited to 1023
+	 */
+	__u8 clamp_pix_limit;
+	/* Select Most left window for bc calculation */
+#define	ISIF_SEL_MOST_LEFT_WIN		0
+	/* Select Most right window for bc calculation */
+#define ISIF_SEL_MOST_RIGHT_WIN		1
+	/* Select most left or right window for clamp val calculation */
+	__u8 base_win_sel_calc;
+	/* Window count per color for calculation. range 1-32 */
+	__u8 win_count_calc;
+	/* Window start position - horizontal for calculation. 0 - 8191 */
+	__u16 win_start_h_calc;
+	/* Window start position - vertical for calculation 0 - 8191 */
+	__u16 win_start_v_calc;
+#define ISIF_HORZ_BC_SZ_H_2PIXELS	0
+#define ISIF_HORZ_BC_SZ_H_4PIXELS	1
+#define ISIF_HORZ_BC_SZ_H_8PIXELS	2
+#define ISIF_HORZ_BC_SZ_H_16PIXELS	3
+	/* Width of the sample window in pixels for calculation */
+	__u8 win_h_sz_calc;
+#define ISIF_HORZ_BC_SZ_V_32PIXELS	0
+#define ISIF_HORZ_BC_SZ_V_64PIXELS	1
+#define	ISIF_HORZ_BC_SZ_V_128PIXELS	2
+#define ISIF_HORZ_BC_SZ_V_256PIXELS	3
+	/* Height of the sample window in pixels for calculation */
+	__u8 win_v_sz_calc;
+};
+
+/************************************************************************
+ *  Black Clamp parameters
+ ***********************************************************************/
+struct isif_vert_bclamp {
+	/* Reset value used is the clamp value calculated */
+#define	ISIF_VERT_BC_USE_HORZ_CLAMP_VAL		0
+	/* Reset value used is reset_clamp_val configured */
+#define	ISIF_VERT_BC_USE_CONFIG_CLAMP_VAL	1
+	/* No update, previous image value is used */
+#define	ISIF_VERT_BC_NO_UPDATE			2
+	/*
+	 * Reset value selector for vertical clamp calculation. Use one of
+	 * the above values
+	 */
+	__u8 reset_val_sel;
+	/* U8Q8. Line average coefficient used in vertical clamp calculation */
+	__u8 line_ave_coef;
+	/* Height of the optical black region for calculation */
+	__u16 ob_v_sz_calc;
+	/* Optical black region start position - horizontal. 0 - 8191 */
+	__u16 ob_start_h;
+	/* Optical black region start position - vertical 0 - 8191 */
+	__u16 ob_start_v;
+};
+
+struct isif_black_clamp {
+	/*
+	 * This offset value is added irrespective of the clamp enable status.
+	 * S13
+	 */
+	__u16 dc_offset;
+	/*
+	 * Enable black/digital clamp value to be subtracted from the image data
+	 */
+	__u8 en;
+	/*
+	 * black clamp mode. same/separate clamp for 4 colors
+	 * 0 - disable - same clamp value for all colors
+	 * 1 - clamp value calculated separately for all colors
+	 */
+	__u8 bc_mode_color;
+	/* Vrtical start position for bc subtraction */
+	__u16 vert_start_sub;
+	/* Black clamp for horizontal direction */
+	struct isif_horz_bclamp horz;
+	/* Black clamp for vertical direction */
+	struct isif_vert_bclamp vert;
+};
+
+/*************************************************************************
+** Color Space Conversion (CSC)
+*************************************************************************/
+#define ISIF_CSC_NUM_COEFF	16
+struct isif_color_space_conv {
+	/* Enable color space conversion */
+	__u8 en;
+	/*
+	 * csc coeffient table. S8Q5, M00 at index 0, M01 at index 1, and
+	 * so forth
+	 */
+	struct isif_float_8 coeff[ISIF_CSC_NUM_COEFF];
+};
+
+
+/*************************************************************************
+**  Black  Compensation parameters
+*************************************************************************/
+struct isif_black_comp {
+	/* Comp for Red */
+	__s8 r_comp;
+	/* Comp for Gr */
+	__s8 gr_comp;
+	/* Comp for Blue */
+	__s8 b_comp;
+	/* Comp for Gb */
+	__s8 gb_comp;
+};
+
+/*************************************************************************
+**  Gain parameters
+*************************************************************************/
+struct isif_gain {
+	/* Gain for Red or ye */
+	struct isif_float_16 r_ye;
+	/* Gain for Gr or cy */
+	struct isif_float_16 gr_cy;
+	/* Gain for Gb or g */
+	struct isif_float_16 gb_g;
+	/* Gain for Blue or mg */
+	struct isif_float_16 b_mg;
+};
+
+#define ISIF_LINEAR_TAB_SIZE	192
+/*************************************************************************
+**  Linearization parameters
+*************************************************************************/
+struct isif_linearize {
+	/* Enable or Disable linearization of data */
+	__u8 en;
+	/* Shift value applied */
+	__u8 corr_shft;
+	/* scale factor applied U11Q10 */
+	struct isif_float_16 scale_fact;
+	/* Size of the linear table */
+	__u16 table[ISIF_LINEAR_TAB_SIZE];
+};
+
+/* Color patterns */
+#define ISIF_RED	0
+#define	ISIF_GREEN_RED	1
+#define ISIF_GREEN_BLUE	2
+#define ISIF_BLUE	3
+struct isif_col_pat {
+	__u8 olop;
+	__u8 olep;
+	__u8 elop;
+	__u8 elep;
+};
+
+/*************************************************************************
+**  Data formatter parameters
+*************************************************************************/
+struct isif_fmtplen {
+	/*
+	 * number of program entries for SET0, range 1 - 16
+	 * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is
+	 * ISIF_COMBINE
+	 */
+	__u16 plen0;
+	/*
+	 * number of program entries for SET1, range 1 - 16
+	 * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is
+	 * ISIF_COMBINE
+	 */
+	__u16 plen1;
+	/**
+	 * number of program entries for SET2, range 1 - 16
+	 * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is
+	 * ISIF_COMBINE
+	 */
+	__u16 plen2;
+	/**
+	 * number of program entries for SET3, range 1 - 16
+	 * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is
+	 * ISIF_COMBINE
+	 */
+	__u16 plen3;
+};
+
+struct isif_fmt_cfg {
+#define ISIF_SPLIT		0
+#define ISIF_COMBINE		1
+	/* Split or combine or line alternate */
+	__u8 fmtmode;
+	/* enable or disable line alternating mode */
+	__u8 ln_alter_en;
+#define ISIF_1LINE		0
+#define	ISIF_2LINES		1
+#define	ISIF_3LINES		2
+#define	ISIF_4LINES		3
+	/* Split/combine line number */
+	__u8 lnum;
+	/* Address increment Range 1 - 16 */
+	__u8 addrinc;
+};
+
+struct isif_fmt_addr_ptr {
+	/* Initial address */
+	__u32 init_addr;
+	/* output line number */
+#define ISIF_1STLINE		0
+#define	ISIF_2NDLINE		1
+#define	ISIF_3RDLINE		2
+#define	ISIF_4THLINE		3
+	__u8 out_line;
+};
+
+struct isif_fmtpgm_ap {
+	/* program address pointer */
+	__u8 pgm_aptr;
+	/* program address increment or decrement */
+	__u8 pgmupdt;
+};
+
+struct isif_data_formatter {
+	/* Enable/Disable data formatter */
+	__u8 en;
+	/* data formatter configuration */
+	struct isif_fmt_cfg cfg;
+	/* Formatter program entries length */
+	struct isif_fmtplen plen;
+	/* first pixel in a line fed to formatter */
+	__u16 fmtrlen;
+	/* HD interval for output line. Only valid when split line */
+	__u16 fmthcnt;
+	/* formatter address pointers */
+	struct isif_fmt_addr_ptr fmtaddr_ptr[16];
+	/* program enable/disable */
+	__u8 pgm_en[32];
+	/* program address pointers */
+	struct isif_fmtpgm_ap fmtpgm_ap[32];
+};
+
+struct isif_df_csc {
+	/* Color Space Conversion confguration, 0 - csc, 1 - df */
+	__u8 df_or_csc;
+	/* csc configuration valid if df_or_csc is 0 */
+	struct isif_color_space_conv csc;
+	/* data formatter configuration valid if df_or_csc is 1 */
+	struct isif_data_formatter df;
+	/* start pixel in a line at the input */
+	__u32 start_pix;
+	/* number of pixels in input line */
+	__u32 num_pixels;
+	/* start line at the input */
+	__u32 start_line;
+	/* number of lines at the input */
+	__u32 num_lines;
+};
+
+struct isif_gain_offsets_adj {
+	/* Gain adjustment per color */
+	struct isif_gain gain;
+	/* Offset adjustment */
+	__u16 offset;
+	/* Enable or Disable Gain adjustment for SDRAM data */
+	__u8 gain_sdram_en;
+	/* Enable or Disable Gain adjustment for IPIPE data */
+	__u8 gain_ipipe_en;
+	/* Enable or Disable Gain adjustment for H3A data */
+	__u8 gain_h3a_en;
+	/* Enable or Disable Gain adjustment for SDRAM data */
+	__u8 offset_sdram_en;
+	/* Enable or Disable Gain adjustment for IPIPE data */
+	__u8 offset_ipipe_en;
+	/* Enable or Disable Gain adjustment for H3A data */
+	__u8 offset_h3a_en;
+};
+
+struct isif_cul {
+	/* Horizontal Cull pattern for odd lines */
+	__u8 hcpat_odd;
+	/* Horizontal Cull pattern for even lines */
+	__u8 hcpat_even;
+	/* Vertical Cull pattern */
+	__u8 vcpat;
+	/* Enable or disable lpf. Apply when cull is enabled */
+	__u8 en_lpf;
+};
+
+struct isif_compress {
+#define ISIF_ALAW		0
+#define ISIF_DPCM		1
+#define ISIF_NO_COMPRESSION	2
+	/* Compression Algorithm used */
+	__u8 alg;
+	/* Choose Predictor1 for DPCM compression */
+#define ISIF_DPCM_PRED1		0
+	/* Choose Predictor2 for DPCM compression */
+#define ISIF_DPCM_PRED2		1
+	/* Predictor for DPCM compression */
+	__u8 pred;
+};
+
+/* all the stuff in this struct will be provided by userland */
+struct isif_config_params_raw {
+	/* Linearization parameters for image sensor data input */
+	struct isif_linearize linearize;
+	/* Data formatter or CSC */
+	struct isif_df_csc df_csc;
+	/* Defect Pixel Correction (DFC) confguration */
+	struct isif_dfc dfc;
+	/* Black/Digital Clamp configuration */
+	struct isif_black_clamp bclamp;
+	/* Gain, offset adjustments */
+	struct isif_gain_offsets_adj gain_offset;
+	/* Culling */
+	struct isif_cul culling;
+	/* A-Law and DPCM compression options */
+	struct isif_compress compress;
+	/* horizontal offset for Gain/LSC/DFC */
+	__u16 horz_offset;
+	/* vertical offset for Gain/LSC/DFC */
+	__u16 vert_offset;
+	/* color pattern for field 0 */
+	struct isif_col_pat col_pat_field0;
+	/* color pattern for field 1 */
+	struct isif_col_pat col_pat_field1;
+#define ISIF_NO_SHIFT		0
+#define	ISIF_1BIT_SHIFT		1
+#define	ISIF_2BIT_SHIFT		2
+#define	ISIF_3BIT_SHIFT		3
+#define	ISIF_4BIT_SHIFT		4
+#define ISIF_5BIT_SHIFT		5
+#define ISIF_6BIT_SHIFT		6
+	/* Data shift applied before storing to SDRAM */
+	__u8 data_shift;
+	/* enable input test pattern generation */
+	__u8 test_pat_gen;
+};
+
+#ifdef __KERNEL__
+struct isif_ycbcr_config {
+	/* isif pixel format */
+	enum ccdc_pixfmt pix_fmt;
+	/* isif frame format */
+	enum ccdc_frmfmt frm_fmt;
+	/* ISIF crop window */
+	struct v4l2_rect win;
+	/* field polarity */
+	enum vpfe_pin_pol fid_pol;
+	/* interface VD polarity */
+	enum vpfe_pin_pol vd_pol;
+	/* interface HD polarity */
+	enum vpfe_pin_pol hd_pol;
+	/* isif pix order. Only used for ycbcr capture */
+	enum ccdc_pixorder pix_order;
+	/* isif buffer type. Only used for ycbcr capture */
+	enum ccdc_buftype buf_type;
+};
+
+/* MSB of image data connected to sensor port */
+enum isif_data_msb {
+	ISIF_BIT_MSB_15,
+	ISIF_BIT_MSB_14,
+	ISIF_BIT_MSB_13,
+	ISIF_BIT_MSB_12,
+	ISIF_BIT_MSB_11,
+	ISIF_BIT_MSB_10,
+	ISIF_BIT_MSB_9,
+	ISIF_BIT_MSB_8,
+	ISIF_BIT_MSB_7
+};
+
+enum isif_cfa_pattern {
+	ISIF_CFA_PAT_MOSAIC,
+	ISIF_CFA_PAT_STRIPE
+};
+
+struct isif_params_raw {
+	/* isif pixel format */
+	enum ccdc_pixfmt pix_fmt;
+	/* isif frame format */
+	enum ccdc_frmfmt frm_fmt;
+	/* video window */
+	struct v4l2_rect win;
+	/* field polarity */
+	enum vpfe_pin_pol fid_pol;
+	/* interface VD polarity */
+	enum vpfe_pin_pol vd_pol;
+	/* interface HD polarity */
+	enum vpfe_pin_pol hd_pol;
+	/* buffer type. Applicable for interlaced mode */
+	enum ccdc_buftype buf_type;
+	/* Gain values */
+	struct isif_gain gain;
+	/* cfa pattern */
+	enum isif_cfa_pattern cfa_pat;
+	/* Data MSB position */
+	enum isif_data_msb data_msb;
+	/* Enable horizontal flip */
+	unsigned char horz_flip_en;
+	/* Enable image invert vertically */
+	unsigned char image_invert_en;
+
+	/* all the userland defined stuff*/
+	struct isif_config_params_raw config_params;
+};
+
+enum isif_data_pack {
+	ISIF_PACK_16BIT,
+	ISIF_PACK_12BIT,
+	ISIF_PACK_8BIT
+};
+
+#define ISIF_WIN_NTSC				{0, 0, 720, 480}
+#define ISIF_WIN_VGA				{0, 0, 640, 480}
+
+#endif
+#endif
diff --git a/include/media/davinci/vpbe.h b/include/media/davinci/vpbe.h
new file mode 100644
index 00000000..8bc1b3c0
--- /dev/null
+++ b/include/media/davinci/vpbe.h
@@ -0,0 +1,200 @@
+/*
+ * Copyright (C) 2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _VPBE_H
+#define _VPBE_H
+
+#include <linux/videodev2.h>
+#include <linux/i2c.h>
+
+#include <media/v4l2-dev.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+#include <media/davinci/vpbe_osd.h>
+#include <media/davinci/vpbe_venc.h>
+#include <media/davinci/vpbe_types.h>
+
+/* OSD configuration info */
+struct osd_config_info {
+	char module_name[32];
+};
+
+struct vpbe_output {
+	struct v4l2_output output;
+	/*
+	 * If output capabilities include dv_preset, list supported presets
+	 * below
+	 */
+	char *subdev_name;
+	/*
+	 * defualt_mode identifies the default timings set at the venc or
+	 * external encoder.
+	 */
+	char *default_mode;
+	/*
+	 * Fields below are used for supporting multiple modes. For example,
+	 * LCD panel might support different modes and they are listed here.
+	 * Similarly for supporting external encoders, lcd controller port
+	 * requires a set of non-standard timing values to be listed here for
+	 * each supported mode since venc is used in non-standard timing mode
+	 * for interfacing with external encoder similar to configuring lcd
+	 * panel timings
+	 */
+	unsigned int num_modes;
+	struct vpbe_enc_mode_info *modes;
+	/*
+	 * Bus configuration goes here for external encoders. Some encoders
+	 * may require multiple interface types for each of the output. For
+	 * example, SD modes would use YCC8 where as HD mode would use YCC16.
+	 * Not sure if this is needed on a per mode basis instead of per
+	 * output basis. If per mode is needed, we may have to move this to
+	 * mode_info structure
+	 */
+	enum v4l2_mbus_pixelcode if_params;
+};
+
+/* encoder configuration info */
+struct encoder_config_info {
+	char module_name[32];
+	/* Is this an i2c device ? */
+	unsigned int is_i2c:1;
+	/* i2c subdevice board info */
+	struct i2c_board_info board_info;
+};
+
+/*amplifier configuration info */
+struct amp_config_info {
+	char module_name[32];
+	/* Is this an i2c device ? */
+	unsigned int is_i2c:1;
+	/* i2c subdevice board info */
+	struct i2c_board_info board_info;
+};
+
+/* structure for defining vpbe display subsystem components */
+struct vpbe_config {
+	char module_name[32];
+	/* i2c bus adapter no */
+	int i2c_adapter_id;
+	struct osd_config_info osd;
+	struct encoder_config_info venc;
+	/* external encoder information goes here */
+	int num_ext_encoders;
+	struct encoder_config_info *ext_encoders;
+	/* amplifier information goes here */
+	struct amp_config_info *amp;
+	int num_outputs;
+	/* Order is venc outputs followed by LCD and then external encoders */
+	struct vpbe_output *outputs;
+};
+
+struct vpbe_device;
+
+struct vpbe_device_ops {
+	/* crop cap for the display */
+	int (*g_cropcap)(struct vpbe_device *vpbe_dev,
+			 struct v4l2_cropcap *cropcap);
+
+	/* Enumerate the outputs */
+	int (*enum_outputs)(struct vpbe_device *vpbe_dev,
+			    struct v4l2_output *output);
+
+	/* Set output to the given index */
+	int (*set_output)(struct vpbe_device *vpbe_dev,
+			 int index);
+
+	/* Get current output */
+	unsigned int (*get_output)(struct vpbe_device *vpbe_dev);
+
+	/* Set DV preset at current output */
+	int (*s_dv_preset)(struct vpbe_device *vpbe_dev,
+			   struct v4l2_dv_preset *dv_preset);
+
+	/* Get DV presets supported at the output */
+	int (*g_dv_preset)(struct vpbe_device *vpbe_dev,
+			   struct v4l2_dv_preset *dv_preset);
+
+	/* Enumerate the DV Presets supported at the output */
+	int (*enum_dv_presets)(struct vpbe_device *vpbe_dev,
+			       struct v4l2_dv_enum_preset *preset_info);
+
+	/* Set std at the output */
+	int (*s_std)(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id);
+
+	/* Get the current std at the output */
+	int (*g_std)(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id);
+
+	/* initialize the device */
+	int (*initialize)(struct device *dev, struct vpbe_device *vpbe_dev);
+
+	/* De-initialize the device */
+	void (*deinitialize)(struct device *dev, struct vpbe_device *vpbe_dev);
+
+	/* Get the current mode info */
+	int (*get_mode_info)(struct vpbe_device *vpbe_dev,
+			     struct vpbe_enc_mode_info*);
+
+	/*
+	 * Set the current mode in the encoder. Alternate way of setting
+	 * standard or DV preset or custom timings in the encoder
+	 */
+	int (*set_mode)(struct vpbe_device *vpbe_dev,
+			struct vpbe_enc_mode_info*);
+	/* Power management operations */
+	int (*suspend)(struct vpbe_device *vpbe_dev);
+	int (*resume)(struct vpbe_device *vpbe_dev);
+};
+
+/* struct for vpbe device */
+struct vpbe_device {
+	/* V4l2 device */
+	struct v4l2_device v4l2_dev;
+	/* vpbe dispay controller cfg */
+	struct vpbe_config *cfg;
+	/* parent device */
+	struct device *pdev;
+	/* external encoder v4l2 sub devices */
+	struct v4l2_subdev **encoders;
+	/* current encoder index */
+	int current_sd_index;
+	/* external amplifier v4l2 subdevice */
+	struct v4l2_subdev *amp;
+	struct mutex lock;
+	/* device initialized */
+	int initialized;
+	/* vpbe dac clock */
+	struct clk *dac_clk;
+	/* osd_device pointer */
+	struct osd_state *osd_device;
+	/* venc device pointer */
+	struct venc_platform_data *venc_device;
+	/*
+	 * fields below are accessed by users of vpbe_device. Not the
+	 * ones above
+	 */
+
+	/* current output */
+	int current_out_index;
+	/* lock used by caller to do atomic operation on vpbe device */
+	/* current timings set in the controller */
+	struct vpbe_enc_mode_info current_timings;
+	/* venc sub device */
+	struct v4l2_subdev *venc;
+	/* device operations below */
+	struct vpbe_device_ops ops;
+};
+
+#endif
diff --git a/include/media/davinci/vpbe_display.h b/include/media/davinci/vpbe_display.h
new file mode 100644
index 00000000..dbf6b376
--- /dev/null
+++ b/include/media/davinci/vpbe_display.h
@@ -0,0 +1,147 @@
+/*
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef VPBE_DISPLAY_H
+#define VPBE_DISPLAY_H
+
+/* Header files */
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+#include <media/videobuf-dma-contig.h>
+#include <media/davinci/vpbe_types.h>
+#include <media/davinci/vpbe_osd.h>
+#include <media/davinci/vpbe.h>
+
+#define VPBE_DISPLAY_MAX_DEVICES 2
+
+enum vpbe_display_device_id {
+	VPBE_DISPLAY_DEVICE_0,
+	VPBE_DISPLAY_DEVICE_1
+};
+
+#define VPBE_DISPLAY_DRV_NAME	"vpbe-display"
+
+#define VPBE_DISPLAY_MAJOR_RELEASE              1
+#define VPBE_DISPLAY_MINOR_RELEASE              0
+#define VPBE_DISPLAY_BUILD                      1
+#define VPBE_DISPLAY_VERSION_CODE ((VPBE_DISPLAY_MAJOR_RELEASE << 16) | \
+	(VPBE_DISPLAY_MINOR_RELEASE << 8)  | \
+	VPBE_DISPLAY_BUILD)
+
+#define VPBE_DISPLAY_VALID_FIELD(field)   ((V4L2_FIELD_NONE == field) || \
+	 (V4L2_FIELD_ANY == field) || (V4L2_FIELD_INTERLACED == field))
+
+/* Exp ratio numerator and denominator constants */
+#define VPBE_DISPLAY_H_EXP_RATIO_N	9
+#define VPBE_DISPLAY_H_EXP_RATIO_D	8
+#define VPBE_DISPLAY_V_EXP_RATIO_N	6
+#define VPBE_DISPLAY_V_EXP_RATIO_D	5
+
+/* Zoom multiplication factor */
+#define VPBE_DISPLAY_ZOOM_4X	4
+#define VPBE_DISPLAY_ZOOM_2X	2
+
+/* Structures */
+struct display_layer_info {
+	int enable;
+	/* Layer ID used by Display Manager */
+	enum osd_layer id;
+	struct osd_layer_config config;
+	enum osd_zoom_factor h_zoom;
+	enum osd_zoom_factor v_zoom;
+	enum osd_h_exp_ratio h_exp;
+	enum osd_v_exp_ratio v_exp;
+};
+
+/* vpbe display object structure */
+struct vpbe_layer {
+	/* number of buffers in fbuffers */
+	unsigned int numbuffers;
+	/* Pointer to the vpbe_display */
+	struct vpbe_display *disp_dev;
+	/* Pointer pointing to current v4l2_buffer */
+	struct videobuf_buffer *cur_frm;
+	/* Pointer pointing to next v4l2_buffer */
+	struct videobuf_buffer *next_frm;
+	/* videobuf specific parameters
+	 * Buffer queue used in video-buf
+	 */
+	struct videobuf_queue buffer_queue;
+	/* Queue of filled frames */
+	struct list_head dma_queue;
+	/* Used in video-buf */
+	spinlock_t irqlock;
+	/* V4l2 specific parameters */
+	/* Identifies video device for this layer */
+	struct video_device video_dev;
+	/* This field keeps track of type of buffer exchange mechanism user
+	 * has selected
+	 */
+	enum v4l2_memory memory;
+	/* Used to keep track of state of the priority */
+	struct v4l2_prio_state prio;
+	/* Used to store pixel format */
+	struct v4l2_pix_format pix_fmt;
+	enum v4l2_field buf_field;
+	/* Video layer configuration params */
+	struct display_layer_info layer_info;
+	/* vpbe specific parameters
+	 * enable window for display
+	 */
+	unsigned char window_enable;
+	/* number of open instances of the layer */
+	unsigned int usrs;
+	/* number of users performing IO */
+	unsigned int io_usrs;
+	/* Indicates id of the field which is being displayed */
+	unsigned int field_id;
+	/* Indicates whether streaming started */
+	unsigned char started;
+	/* Identifies device object */
+	enum vpbe_display_device_id device_id;
+	/* facilitation of ioctl ops lock by v4l2*/
+	struct mutex opslock;
+	u8 layer_first_int;
+};
+
+/* vpbe device structure */
+struct vpbe_display {
+	/* layer specific parameters */
+	/* lock for isr updates to buf layers*/
+	spinlock_t dma_queue_lock;
+	/* C-Plane offset from start of y-plane */
+	unsigned int cbcr_ofst;
+	struct vpbe_layer *dev[VPBE_DISPLAY_MAX_DEVICES];
+	struct vpbe_device *vpbe_dev;
+	struct osd_state *osd_device;
+};
+
+/* File handle structure */
+struct vpbe_fh {
+	/* vpbe device structure */
+	struct vpbe_display *disp_dev;
+	/* pointer to layer object for opened device */
+	struct vpbe_layer *layer;
+	/* Indicates whether this file handle is doing IO */
+	unsigned char io_allowed;
+	/* Used to keep track priority of this instance */
+	enum v4l2_priority prio;
+};
+
+struct buf_config_params {
+	unsigned char min_numbuffers;
+	unsigned char numbuffers[VPBE_DISPLAY_MAX_DEVICES];
+	unsigned int min_bufsize[VPBE_DISPLAY_MAX_DEVICES];
+	unsigned int layer_bufsize[VPBE_DISPLAY_MAX_DEVICES];
+};
+
+#endif	/* VPBE_DISPLAY_H */
diff --git a/include/media/davinci/vpbe_osd.h b/include/media/davinci/vpbe_osd.h
new file mode 100644
index 00000000..d7e397a4
--- /dev/null
+++ b/include/media/davinci/vpbe_osd.h
@@ -0,0 +1,394 @@
+/*
+ * Copyright (C) 2007-2009 Texas Instruments Inc
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * Andy Lowe (alowe@mvista.com), MontaVista Software
+ * - Initial version
+ * Murali Karicheri (mkaricheri@gmail.com), Texas Instruments Ltd.
+ * - ported to sub device interface
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2..
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#ifndef _OSD_H
+#define _OSD_H
+
+#include <media/davinci/vpbe_types.h>
+
+#define VPBE_OSD_SUBDEV_NAME "vpbe-osd"
+
+/**
+ * enum osd_layer
+ * @WIN_OSD0: On-Screen Display Window 0
+ * @WIN_VID0: Video Window 0
+ * @WIN_OSD1: On-Screen Display Window 1
+ * @WIN_VID1: Video Window 1
+ *
+ * Description:
+ * An enumeration of the osd display layers.
+ */
+enum osd_layer {
+	WIN_OSD0,
+	WIN_VID0,
+	WIN_OSD1,
+	WIN_VID1,
+};
+
+/**
+ * enum osd_win_layer
+ * @OSDWIN_OSD0: On-Screen Display Window 0
+ * @OSDWIN_OSD1: On-Screen Display Window 1
+ *
+ * Description:
+ * An enumeration of the OSD Window layers.
+ */
+enum osd_win_layer {
+	OSDWIN_OSD0,
+	OSDWIN_OSD1,
+};
+
+/**
+ * enum osd_pix_format
+ * @PIXFMT_1BPP: 1-bit-per-pixel bitmap
+ * @PIXFMT_2BPP: 2-bits-per-pixel bitmap
+ * @PIXFMT_4BPP: 4-bits-per-pixel bitmap
+ * @PIXFMT_8BPP: 8-bits-per-pixel bitmap
+ * @PIXFMT_RGB565: 16-bits-per-pixel RGB565
+ * @PIXFMT_YCbCrI: YUV 4:2:2
+ * @PIXFMT_RGB888: 24-bits-per-pixel RGB888
+ * @PIXFMT_YCrCbI: YUV 4:2:2 with chroma swap
+ * @PIXFMT_NV12: YUV 4:2:0 planar
+ * @PIXFMT_OSD_ATTR: OSD Attribute Window pixel format (4bpp)
+ *
+ * Description:
+ * An enumeration of the DaVinci pixel formats.
+ */
+enum osd_pix_format {
+	PIXFMT_1BPP = 0,
+	PIXFMT_2BPP,
+	PIXFMT_4BPP,
+	PIXFMT_8BPP,
+	PIXFMT_RGB565,
+	PIXFMT_YCbCrI,
+	PIXFMT_RGB888,
+	PIXFMT_YCrCbI,
+	PIXFMT_NV12,
+	PIXFMT_OSD_ATTR,
+};
+
+/**
+ * enum osd_h_exp_ratio
+ * @H_EXP_OFF: no expansion (1/1)
+ * @H_EXP_9_OVER_8: 9/8 expansion ratio
+ * @H_EXP_3_OVER_2: 3/2 expansion ratio
+ *
+ * Description:
+ * An enumeration of the available horizontal expansion ratios.
+ */
+enum osd_h_exp_ratio {
+	H_EXP_OFF,
+	H_EXP_9_OVER_8,
+	H_EXP_3_OVER_2,
+};
+
+/**
+ * enum osd_v_exp_ratio
+ * @V_EXP_OFF: no expansion (1/1)
+ * @V_EXP_6_OVER_5: 6/5 expansion ratio
+ *
+ * Description:
+ * An enumeration of the available vertical expansion ratios.
+ */
+enum osd_v_exp_ratio {
+	V_EXP_OFF,
+	V_EXP_6_OVER_5,
+};
+
+/**
+ * enum osd_zoom_factor
+ * @ZOOM_X1: no zoom (x1)
+ * @ZOOM_X2: x2 zoom
+ * @ZOOM_X4: x4 zoom
+ *
+ * Description:
+ * An enumeration of the available zoom factors.
+ */
+enum osd_zoom_factor {
+	ZOOM_X1,
+	ZOOM_X2,
+	ZOOM_X4,
+};
+
+/**
+ * enum osd_clut
+ * @ROM_CLUT: ROM CLUT
+ * @RAM_CLUT: RAM CLUT
+ *
+ * Description:
+ * An enumeration of the available Color Lookup Tables (CLUTs).
+ */
+enum osd_clut {
+	ROM_CLUT,
+	RAM_CLUT,
+};
+
+/**
+ * enum osd_rom_clut
+ * @ROM_CLUT0: Macintosh CLUT
+ * @ROM_CLUT1: CLUT from DM270 and prior devices
+ *
+ * Description:
+ * An enumeration of the ROM Color Lookup Table (CLUT) options.
+ */
+enum osd_rom_clut {
+	ROM_CLUT0,
+	ROM_CLUT1,
+};
+
+/**
+ * enum osd_blending_factor
+ * @OSD_0_VID_8: OSD pixels are fully transparent
+ * @OSD_1_VID_7: OSD pixels contribute 1/8, video pixels contribute 7/8
+ * @OSD_2_VID_6: OSD pixels contribute 2/8, video pixels contribute 6/8
+ * @OSD_3_VID_5: OSD pixels contribute 3/8, video pixels contribute 5/8
+ * @OSD_4_VID_4: OSD pixels contribute 4/8, video pixels contribute 4/8
+ * @OSD_5_VID_3: OSD pixels contribute 5/8, video pixels contribute 3/8
+ * @OSD_6_VID_2: OSD pixels contribute 6/8, video pixels contribute 2/8
+ * @OSD_8_VID_0: OSD pixels are fully opaque
+ *
+ * Description:
+ * An enumeration of the DaVinci pixel blending factor options.
+ */
+enum osd_blending_factor {
+	OSD_0_VID_8,
+	OSD_1_VID_7,
+	OSD_2_VID_6,
+	OSD_3_VID_5,
+	OSD_4_VID_4,
+	OSD_5_VID_3,
+	OSD_6_VID_2,
+	OSD_8_VID_0,
+};
+
+/**
+ * enum osd_blink_interval
+ * @BLINK_X1: blink interval is 1 vertical refresh cycle
+ * @BLINK_X2: blink interval is 2 vertical refresh cycles
+ * @BLINK_X3: blink interval is 3 vertical refresh cycles
+ * @BLINK_X4: blink interval is 4 vertical refresh cycles
+ *
+ * Description:
+ * An enumeration of the DaVinci pixel blinking interval options.
+ */
+enum osd_blink_interval {
+	BLINK_X1,
+	BLINK_X2,
+	BLINK_X3,
+	BLINK_X4,
+};
+
+/**
+ * enum osd_cursor_h_width
+ * @H_WIDTH_1: horizontal line width is 1 pixel
+ * @H_WIDTH_4: horizontal line width is 4 pixels
+ * @H_WIDTH_8: horizontal line width is 8 pixels
+ * @H_WIDTH_12: horizontal line width is 12 pixels
+ * @H_WIDTH_16: horizontal line width is 16 pixels
+ * @H_WIDTH_20: horizontal line width is 20 pixels
+ * @H_WIDTH_24: horizontal line width is 24 pixels
+ * @H_WIDTH_28: horizontal line width is 28 pixels
+ */
+enum osd_cursor_h_width {
+	H_WIDTH_1,
+	H_WIDTH_4,
+	H_WIDTH_8,
+	H_WIDTH_12,
+	H_WIDTH_16,
+	H_WIDTH_20,
+	H_WIDTH_24,
+	H_WIDTH_28,
+};
+
+/**
+ * enum davinci_cursor_v_width
+ * @V_WIDTH_1: vertical line width is 1 line
+ * @V_WIDTH_2: vertical line width is 2 lines
+ * @V_WIDTH_4: vertical line width is 4 lines
+ * @V_WIDTH_6: vertical line width is 6 lines
+ * @V_WIDTH_8: vertical line width is 8 lines
+ * @V_WIDTH_10: vertical line width is 10 lines
+ * @V_WIDTH_12: vertical line width is 12 lines
+ * @V_WIDTH_14: vertical line width is 14 lines
+ */
+enum osd_cursor_v_width {
+	V_WIDTH_1,
+	V_WIDTH_2,
+	V_WIDTH_4,
+	V_WIDTH_6,
+	V_WIDTH_8,
+	V_WIDTH_10,
+	V_WIDTH_12,
+	V_WIDTH_14,
+};
+
+/**
+ * struct osd_cursor_config
+ * @xsize: horizontal size in pixels
+ * @ysize: vertical size in lines
+ * @xpos: horizontal offset in pixels from the left edge of the display
+ * @ypos: vertical offset in lines from the top of the display
+ * @interlaced: Non-zero if the display is interlaced, or zero otherwise
+ * @h_width: horizontal line width
+ * @v_width: vertical line width
+ * @clut: the CLUT selector (ROM or RAM) for the cursor color
+ * @clut_index: an index into the CLUT for the cursor color
+ *
+ * Description:
+ * A structure describing the configuration parameters of the hardware
+ * rectangular cursor.
+ */
+struct osd_cursor_config {
+	unsigned xsize;
+	unsigned ysize;
+	unsigned xpos;
+	unsigned ypos;
+	int interlaced;
+	enum osd_cursor_h_width h_width;
+	enum osd_cursor_v_width v_width;
+	enum osd_clut clut;
+	unsigned char clut_index;
+};
+
+/**
+ * struct osd_layer_config
+ * @pixfmt: pixel format
+ * @line_length: offset in bytes between start of each line in memory
+ * @xsize: number of horizontal pixels displayed per line
+ * @ysize: number of lines displayed
+ * @xpos: horizontal offset in pixels from the left edge of the display
+ * @ypos: vertical offset in lines from the top of the display
+ * @interlaced: Non-zero if the display is interlaced, or zero otherwise
+ *
+ * Description:
+ * A structure describing the configuration parameters of an On-Screen Display
+ * (OSD) or video layer related to how the image is stored in memory.
+ * @line_length must be a multiple of the cache line size (32 bytes).
+ */
+struct osd_layer_config {
+	enum osd_pix_format pixfmt;
+	unsigned line_length;
+	unsigned xsize;
+	unsigned ysize;
+	unsigned xpos;
+	unsigned ypos;
+	int interlaced;
+};
+
+/* parameters that apply on a per-window (OSD or video) basis */
+struct osd_window_state {
+	int is_allocated;
+	int is_enabled;
+	unsigned long fb_base_phys;
+	enum osd_zoom_factor h_zoom;
+	enum osd_zoom_factor v_zoom;
+	struct osd_layer_config lconfig;
+};
+
+/* parameters that apply on a per-OSD-window basis */
+struct osd_osdwin_state {
+	enum osd_clut clut;
+	enum osd_blending_factor blend;
+	int colorkey_blending;
+	unsigned colorkey;
+	int rec601_attenuation;
+	/* index is pixel value */
+	unsigned char palette_map[16];
+};
+
+/* hardware rectangular cursor parameters */
+struct osd_cursor_state {
+	int is_enabled;
+	struct osd_cursor_config config;
+};
+
+struct osd_state;
+
+struct vpbe_osd_ops {
+	int (*initialize)(struct osd_state *sd);
+	int (*request_layer)(struct osd_state *sd, enum osd_layer layer);
+	void (*release_layer)(struct osd_state *sd, enum osd_layer layer);
+	int (*enable_layer)(struct osd_state *sd, enum osd_layer layer,
+			    int otherwin);
+	void (*disable_layer)(struct osd_state *sd, enum osd_layer layer);
+	int (*set_layer_config)(struct osd_state *sd, enum osd_layer layer,
+				struct osd_layer_config *lconfig);
+	void (*get_layer_config)(struct osd_state *sd, enum osd_layer layer,
+				 struct osd_layer_config *lconfig);
+	void (*start_layer)(struct osd_state *sd, enum osd_layer layer,
+			    unsigned long fb_base_phys,
+			    unsigned long cbcr_ofst);
+	void (*set_left_margin)(struct osd_state *sd, u32 val);
+	void (*set_top_margin)(struct osd_state *sd, u32 val);
+	void (*set_interpolation_filter)(struct osd_state *sd, int filter);
+	int (*set_vid_expansion)(struct osd_state *sd,
+					enum osd_h_exp_ratio h_exp,
+					enum osd_v_exp_ratio v_exp);
+	void (*get_vid_expansion)(struct osd_state *sd,
+					enum osd_h_exp_ratio *h_exp,
+					enum osd_v_exp_ratio *v_exp);
+	void (*set_zoom)(struct osd_state *sd, enum osd_layer layer,
+				enum osd_zoom_factor h_zoom,
+				enum osd_zoom_factor v_zoom);
+};
+
+struct osd_state {
+	enum vpbe_version vpbe_type;
+	spinlock_t lock;
+	struct device *dev;
+	dma_addr_t osd_base_phys;
+	unsigned long osd_base;
+	unsigned long osd_size;
+	/* 1-->the isr will toggle the VID0 ping-pong buffer */
+	int pingpong;
+	int interpolation_filter;
+	int field_inversion;
+	enum osd_h_exp_ratio osd_h_exp;
+	enum osd_v_exp_ratio osd_v_exp;
+	enum osd_h_exp_ratio vid_h_exp;
+	enum osd_v_exp_ratio vid_v_exp;
+	enum osd_clut backg_clut;
+	unsigned backg_clut_index;
+	enum osd_rom_clut rom_clut;
+	int is_blinking;
+	/* attribute window blinking enabled */
+	enum osd_blink_interval blink;
+	/* YCbCrI or YCrCbI */
+	enum osd_pix_format yc_pixfmt;
+	/* columns are Y, Cb, Cr */
+	unsigned char clut_ram[256][3];
+	struct osd_cursor_state cursor;
+	/* OSD0, VID0, OSD1, VID1 */
+	struct osd_window_state win[4];
+	/* OSD0, OSD1 */
+	struct osd_osdwin_state osdwin[2];
+	/* OSD device Operations */
+	struct vpbe_osd_ops ops;
+};
+
+struct osd_platform_data {
+	enum vpbe_version vpbe_type;
+	int  field_inv_wa_enable;
+};
+
+#endif
diff --git a/include/media/davinci/vpbe_types.h b/include/media/davinci/vpbe_types.h
new file mode 100644
index 00000000..727f5517
--- /dev/null
+++ b/include/media/davinci/vpbe_types.h
@@ -0,0 +1,91 @@
+/*
+ * Copyright (C) 2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _VPBE_TYPES_H
+#define _VPBE_TYPES_H
+
+enum vpbe_version {
+	VPBE_VERSION_1 = 1,
+	VPBE_VERSION_2,
+	VPBE_VERSION_3,
+};
+
+/* vpbe_timing_type - Timing types used in vpbe device */
+enum vpbe_enc_timings_type {
+	VPBE_ENC_STD = 0x1,
+	VPBE_ENC_DV_PRESET = 0x2,
+	VPBE_ENC_CUSTOM_TIMINGS = 0x4,
+	/* Used when set timings through FB device interface */
+	VPBE_ENC_TIMINGS_INVALID = 0x8,
+};
+
+union vpbe_timings {
+	v4l2_std_id std_id;
+	unsigned int dv_preset;
+};
+
+/*
+ * struct vpbe_enc_mode_info
+ * @name: ptr to name string of the standard, "NTSC", "PAL" etc
+ * @std: standard or non-standard mode. 1 - standard, 0 - nonstandard
+ * @interlaced: 1 - interlaced, 0 - non interlaced/progressive
+ * @xres: x or horizontal resolution of the display
+ * @yres: y or vertical resolution of the display
+ * @fps: frame per second
+ * @left_margin: left margin of the display
+ * @right_margin: right margin of the display
+ * @upper_margin: upper margin of the display
+ * @lower_margin: lower margin of the display
+ * @hsync_len: h-sync length
+ * @vsync_len: v-sync length
+ * @flags: bit field: bit usage is documented below
+ *
+ * Description:
+ *  Structure holding timing and resolution information of a standard.
+ * Used by vpbe_device to set required non-standard timing in the
+ * venc when lcd controller output is connected to a external encoder.
+ * A table of timings is maintained in vpbe device to set this in
+ * venc when external encoder is connected to lcd controller output.
+ * Encoder may provide a g_dv_timings() API to override these values
+ * as needed.
+ *
+ *  Notes
+ *  ------
+ *  if_type should be used only by encoder manager and encoder.
+ *  flags usage
+ *     b0 (LSB) - hsync polarity, 0 - negative, 1 - positive
+ *     b1       - vsync polarity, 0 - negative, 1 - positive
+ *     b2       - field id polarity, 0 - negative, 1  - positive
+ */
+struct vpbe_enc_mode_info {
+	unsigned char *name;
+	enum vpbe_enc_timings_type timings_type;
+	union vpbe_timings timings;
+	unsigned int interlaced;
+	unsigned int xres;
+	unsigned int yres;
+	struct v4l2_fract aspect;
+	struct v4l2_fract fps;
+	unsigned int left_margin;
+	unsigned int right_margin;
+	unsigned int upper_margin;
+	unsigned int lower_margin;
+	unsigned int hsync_len;
+	unsigned int vsync_len;
+	unsigned int flags;
+};
+
+#endif
diff --git a/include/media/davinci/vpbe_venc.h b/include/media/davinci/vpbe_venc.h
new file mode 100644
index 00000000..6b57334f
--- /dev/null
+++ b/include/media/davinci/vpbe_venc.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _VPBE_VENC_H
+#define _VPBE_VENC_H
+
+#include <media/v4l2-subdev.h>
+#include <media/davinci/vpbe_types.h>
+
+#define VPBE_VENC_SUBDEV_NAME "vpbe-venc"
+
+/* venc events */
+#define VENC_END_OF_FRAME	BIT(0)
+#define VENC_FIRST_FIELD	BIT(1)
+#define VENC_SECOND_FIELD	BIT(2)
+
+struct venc_platform_data {
+	enum vpbe_version venc_type;
+	int (*setup_pinmux)(enum v4l2_mbus_pixelcode if_type,
+			    int field);
+	int (*setup_clock)(enum vpbe_enc_timings_type type,
+			   unsigned int mode);
+	int (*setup_if_config)(enum v4l2_mbus_pixelcode pixcode);
+	/* Number of LCD outputs supported */
+	int num_lcd_outputs;
+	struct vpbe_if_params *lcd_if_params;
+};
+
+enum venc_ioctls {
+	VENC_GET_FLD = 1,
+};
+
+/* exported functions */
+struct v4l2_subdev *venc_sub_dev_init(struct v4l2_device *v4l2_dev,
+		const char *venc_name);
+#endif
diff --git a/include/media/davinci/vpfe_capture.h b/include/media/davinci/vpfe_capture.h
new file mode 100644
index 00000000..cc973ed8
--- /dev/null
+++ b/include/media/davinci/vpfe_capture.h
@@ -0,0 +1,202 @@
+/*
+ * Copyright (C) 2008-2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _VPFE_CAPTURE_H
+#define _VPFE_CAPTURE_H
+
+#ifdef __KERNEL__
+
+/* Header files */
+#include <media/v4l2-dev.h>
+#include <linux/videodev2.h>
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+#include <media/videobuf-dma-contig.h>
+#include <media/davinci/vpfe_types.h>
+
+#define VPFE_CAPTURE_NUM_DECODERS        5
+
+/* Macros */
+#define VPFE_MAJOR_RELEASE              0
+#define VPFE_MINOR_RELEASE              0
+#define VPFE_BUILD                      1
+#define VPFE_CAPTURE_VERSION_CODE       ((VPFE_MAJOR_RELEASE << 16) | \
+					(VPFE_MINOR_RELEASE << 8)  | \
+					VPFE_BUILD)
+
+#define CAPTURE_DRV_NAME		"vpfe-capture"
+
+struct vpfe_pixel_format {
+	struct v4l2_fmtdesc fmtdesc;
+	/* bytes per pixel */
+	int bpp;
+};
+
+struct vpfe_std_info {
+	int active_pixels;
+	int active_lines;
+	/* current frame format */
+	int frame_format;
+};
+
+struct vpfe_route {
+	u32 input;
+	u32 output;
+};
+
+struct vpfe_subdev_info {
+	/* Sub device name */
+	char name[32];
+	/* Sub device group id */
+	int grp_id;
+	/* Number of inputs supported */
+	int num_inputs;
+	/* inputs available at the sub device */
+	struct v4l2_input *inputs;
+	/* Sub dev routing information for each input */
+	struct vpfe_route *routes;
+	/* check if sub dev supports routing */
+	int can_route;
+	/* ccdc bus/interface configuration */
+	struct vpfe_hw_if_param ccdc_if_params;
+	/* i2c subdevice board info */
+	struct i2c_board_info board_info;
+};
+
+struct vpfe_config {
+	/* Number of sub devices connected to vpfe */
+	int num_subdevs;
+	/* i2c bus adapter no */
+	int i2c_adapter_id;
+	/* information about each subdev */
+	struct vpfe_subdev_info *sub_devs;
+	/* evm card info */
+	char *card_name;
+	/* ccdc name */
+	char *ccdc;
+	/* vpfe clock */
+	struct clk *vpssclk;
+	struct clk *slaveclk;
+	/* Function for Clearing the interrupt */
+	void (*clr_intr)(int vdint);
+};
+
+struct vpfe_device {
+	/* V4l2 specific parameters */
+	/* Identifies video device for this channel */
+	struct video_device *video_dev;
+	/* sub devices */
+	struct v4l2_subdev **sd;
+	/* vpfe cfg */
+	struct vpfe_config *cfg;
+	/* V4l2 device */
+	struct v4l2_device v4l2_dev;
+	/* parent device */
+	struct device *pdev;
+	/* Used to keep track of state of the priority */
+	struct v4l2_prio_state prio;
+	/* number of open instances of the channel */
+	u32 usrs;
+	/* Indicates id of the field which is being displayed */
+	u32 field_id;
+	/* flag to indicate whether decoder is initialized */
+	u8 initialized;
+	/* current interface type */
+	struct vpfe_hw_if_param vpfe_if_params;
+	/* ptr to currently selected sub device */
+	struct vpfe_subdev_info *current_subdev;
+	/* current input at the sub device */
+	int current_input;
+	/* Keeps track of the information about the standard */
+	struct vpfe_std_info std_info;
+	/* std index into std table */
+	int std_index;
+	/* CCDC IRQs used when CCDC/ISIF output to SDRAM */
+	unsigned int ccdc_irq0;
+	unsigned int ccdc_irq1;
+	/* number of buffers in fbuffers */
+	u32 numbuffers;
+	/* List of buffer pointers for storing frames */
+	u8 *fbuffers[VIDEO_MAX_FRAME];
+	/* Pointer pointing to current v4l2_buffer */
+	struct videobuf_buffer *cur_frm;
+	/* Pointer pointing to next v4l2_buffer */
+	struct videobuf_buffer *next_frm;
+	/*
+	 * This field keeps track of type of buffer exchange mechanism
+	 * user has selected
+	 */
+	enum v4l2_memory memory;
+	/* Used to store pixel format */
+	struct v4l2_format fmt;
+	/*
+	 * used when IMP is chained to store the crop window which
+	 * is different from the image window
+	 */
+	struct v4l2_rect crop;
+	/* Buffer queue used in video-buf */
+	struct videobuf_queue buffer_queue;
+	/* Queue of filled frames */
+	struct list_head dma_queue;
+	/* Used in video-buf */
+	spinlock_t irqlock;
+	/* IRQ lock for DMA queue */
+	spinlock_t dma_queue_lock;
+	/* lock used to access this structure */
+	struct mutex lock;
+	/* number of users performing IO */
+	u32 io_usrs;
+	/* Indicates whether streaming started */
+	u8 started;
+	/*
+	 * offset where second field starts from the starting of the
+	 * buffer for field separated YCbCr formats
+	 */
+	u32 field_off;
+};
+
+/* File handle structure */
+struct vpfe_fh {
+	struct vpfe_device *vpfe_dev;
+	/* Indicates whether this file handle is doing IO */
+	u8 io_allowed;
+	/* Used to keep track priority of this instance */
+	enum v4l2_priority prio;
+};
+
+struct vpfe_config_params {
+	u8 min_numbuffers;
+	u8 numbuffers;
+	u32 min_bufsize;
+	u32 device_bufsize;
+};
+
+#endif				/* End of __KERNEL__ */
+/**
+ * VPFE_CMD_S_CCDC_RAW_PARAMS - EXPERIMENTAL IOCTL to set raw capture params
+ * This can be used to configure modules such as defect pixel correction,
+ * color space conversion, culling etc. This is an experimental ioctl that
+ * will change in future kernels. So use this ioctl with care !
+ * TODO: This is to be split into multiple ioctls and also explore the
+ * possibility of extending the v4l2 api to include this
+ **/
+#define VPFE_CMD_S_CCDC_RAW_PARAMS _IOW('V', BASE_VIDIOC_PRIVATE + 1, \
+					void *)
+#endif				/* _DAVINCI_VPFE_H */
diff --git a/include/media/davinci/vpfe_types.h b/include/media/davinci/vpfe_types.h
new file mode 100644
index 00000000..76fb74ba
--- /dev/null
+++ b/include/media/davinci/vpfe_types.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2008-2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option)any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _VPFE_TYPES_H
+#define _VPFE_TYPES_H
+
+#ifdef __KERNEL__
+
+enum vpfe_pin_pol {
+	VPFE_PINPOL_POSITIVE,
+	VPFE_PINPOL_NEGATIVE
+};
+
+enum vpfe_hw_if_type {
+	/* BT656 - 8 bit */
+	VPFE_BT656,
+	/* BT1120 - 16 bit */
+	VPFE_BT1120,
+	/* Raw Bayer */
+	VPFE_RAW_BAYER,
+	/* YCbCr - 8 bit with external sync */
+	VPFE_YCBCR_SYNC_8,
+	/* YCbCr - 16 bit with external sync */
+	VPFE_YCBCR_SYNC_16,
+	/* BT656 - 10 bit */
+	VPFE_BT656_10BIT
+};
+
+/* interface description */
+struct vpfe_hw_if_param {
+	enum vpfe_hw_if_type if_type;
+	enum vpfe_pin_pol hdpol;
+	enum vpfe_pin_pol vdpol;
+};
+
+#endif
+#endif
diff --git a/include/media/davinci/vpif_types.h b/include/media/davinci/vpif_types.h
new file mode 100644
index 00000000..bd8217c2
--- /dev/null
+++ b/include/media/davinci/vpif_types.h
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _VPIF_TYPES_H
+#define _VPIF_TYPES_H
+
+#include <linux/i2c.h>
+
+#define VPIF_CAPTURE_MAX_CHANNELS	2
+
+enum vpif_if_type {
+	VPIF_IF_BT656,
+	VPIF_IF_BT1120,
+	VPIF_IF_RAW_BAYER
+};
+
+struct vpif_interface {
+	enum vpif_if_type if_type;
+	unsigned hd_pol:1;
+	unsigned vd_pol:1;
+	unsigned fid_pol:1;
+};
+
+struct vpif_subdev_info {
+	const char *name;
+	struct i2c_board_info board_info;
+	u32 input;
+	u32 output;
+	unsigned can_route:1;
+	struct vpif_interface vpif_if;
+};
+
+struct vpif_display_config {
+	int (*set_clock)(int, int);
+	struct vpif_subdev_info *subdevinfo;
+	int subdev_count;
+	const char **output;
+	int output_count;
+	const char *card_name;
+};
+
+struct vpif_input {
+	struct v4l2_input input;
+	const char *subdev_name;
+};
+
+struct vpif_capture_chan_config {
+	const struct vpif_input *inputs;
+	int input_count;
+};
+
+struct vpif_capture_config {
+	int (*setup_input_channel_mode)(int);
+	int (*setup_input_path)(int, const char *);
+	struct vpif_capture_chan_config chan_config[VPIF_CAPTURE_MAX_CHANNELS];
+	struct vpif_subdev_info *subdev_info;
+	int subdev_count;
+	const char *card_name;
+};
+#endif /* _VPIF_TYPES_H */
diff --git a/include/media/davinci/vpss.h b/include/media/davinci/vpss.h
new file mode 100644
index 00000000..b586495b
--- /dev/null
+++ b/include/media/davinci/vpss.h
@@ -0,0 +1,108 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * vpss - video processing subsystem module header file.
+ *
+ * Include this header file if a driver needs to configure vpss system
+ * module. It exports a set of library functions  for video drivers to
+ * configure vpss system module functions such as clock enable/disable,
+ * vpss interrupt mux to arm, and other common vpss system module
+ * functions.
+ */
+#ifndef _VPSS_H
+#define _VPSS_H
+
+/* selector for ccdc input selection on DM355 */
+enum vpss_ccdc_source_sel {
+	VPSS_CCDCIN,
+	VPSS_HSSIIN,
+	VPSS_PGLPBK,	/* for DM365 only */
+	VPSS_CCDCPG	/* for DM365 only */
+};
+
+struct vpss_sync_pol {
+	unsigned int ccdpg_hdpol:1;
+	unsigned int ccdpg_vdpol:1;
+};
+
+struct vpss_pg_frame_size {
+	short hlpfr;
+	short pplen;
+};
+
+/* Used for enable/disable VPSS Clock */
+enum vpss_clock_sel {
+	/* DM355/DM365 */
+	VPSS_CCDC_CLOCK,
+	VPSS_IPIPE_CLOCK,
+	VPSS_H3A_CLOCK,
+	VPSS_CFALD_CLOCK,
+	/*
+	 * When using VPSS_VENC_CLOCK_SEL in vpss_enable_clock() api
+	 * following applies:-
+	 * en = 0 selects ENC_CLK
+	 * en = 1 selects ENC_CLK/2
+	 */
+	VPSS_VENC_CLOCK_SEL,
+	VPSS_VPBE_CLOCK,
+	/* DM365 only clocks */
+	VPSS_IPIPEIF_CLOCK,
+	VPSS_RSZ_CLOCK,
+	VPSS_BL_CLOCK,
+	/*
+	 * When using VPSS_PCLK_INTERNAL in vpss_enable_clock() api
+	 * following applies:-
+	 * en = 0 disable internal PCLK
+	 * en = 1 enables internal PCLK
+	 */
+	VPSS_PCLK_INTERNAL,
+	/*
+	 * When using VPSS_PSYNC_CLOCK_SEL in vpss_enable_clock() api
+	 * following applies:-
+	 * en = 0 enables MMR clock
+	 * en = 1 enables VPSS clock
+	 */
+	VPSS_PSYNC_CLOCK_SEL,
+	VPSS_LDC_CLOCK_SEL,
+	VPSS_OSD_CLOCK_SEL,
+	VPSS_FDIF_CLOCK,
+	VPSS_LDC_CLOCK
+};
+
+/* select input to ccdc on dm355 */
+int vpss_select_ccdc_source(enum vpss_ccdc_source_sel src_sel);
+/* enable/disable a vpss clock, 0 - success, -1 - failure */
+int vpss_enable_clock(enum vpss_clock_sel clock_sel, int en);
+/* set sync polarity, only for DM365*/
+void dm365_vpss_set_sync_pol(struct vpss_sync_pol);
+/* set the PG_FRAME_SIZE register, only for DM365 */
+void dm365_vpss_set_pg_frame_size(struct vpss_pg_frame_size);
+
+/* wbl reset for dm644x */
+enum vpss_wbl_sel {
+	VPSS_PCR_AEW_WBL_0 = 16,
+	VPSS_PCR_AF_WBL_0,
+	VPSS_PCR_RSZ4_WBL_0,
+	VPSS_PCR_RSZ3_WBL_0,
+	VPSS_PCR_RSZ2_WBL_0,
+	VPSS_PCR_RSZ1_WBL_0,
+	VPSS_PCR_PREV_WBL_0,
+	VPSS_PCR_CCDC_WBL_O,
+};
+/* clear wbl overflow flag for DM6446 */
+int vpss_clear_wbl_overflow(enum vpss_wbl_sel wbl_sel);
+#endif
diff --git a/include/media/gpio-ir-recv.h b/include/media/gpio-ir-recv.h
new file mode 100644
index 00000000..67797bf5
--- /dev/null
+++ b/include/media/gpio-ir-recv.h
@@ -0,0 +1,22 @@
+/* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __GPIO_IR_RECV_H__
+#define __GPIO_IR_RECV_H__
+
+struct gpio_ir_recv_platform_data {
+	int gpio_nr;
+	bool active_low;
+};
+
+#endif /* __GPIO_IR_RECV_H__ */
+
diff --git a/include/media/i2c-addr.h b/include/media/i2c-addr.h
new file mode 100644
index 00000000..5d0f5605
--- /dev/null
+++ b/include/media/i2c-addr.h
@@ -0,0 +1,42 @@
+/*
+ *	V4L I2C address list
+ *
+ *
+ *	Copyright (C) 2006 Mauro Carvalho Chehab <mchehab@infradead.org>
+ *	Based on a previous mapping by
+ *	Ralph Metzler (rjkm@thp.uni-koeln.de)
+ *	Gerd Knorr <kraxel@goldbach.in-berlin.de>
+ *
+ */
+
+/* bttv address list */
+#define I2C_ADDR_TSA5522	0xc2
+#define I2C_ADDR_TDA7432	0x8a
+#define I2C_ADDR_TDA8425	0x82
+#define I2C_ADDR_TDA9840	0x84
+#define I2C_ADDR_TDA9850	0xb6 /* also used by 9855,9873 */
+#define I2C_ADDR_TDA9874	0xb0 /* also used by 9875 */
+#define I2C_ADDR_TDA9875	0xb0
+#define I2C_ADDR_HAUPEE		0xa0
+#define I2C_ADDR_STBEE		0xae
+#define I2C_ADDR_VHX		0xc0
+#define I2C_ADDR_MSP3400	0x80
+#define I2C_ADDR_MSP3400_ALT	0x88
+#define I2C_ADDR_TEA6300	0x80 /* also used by 6320 */
+#define I2C_ADDR_DPL3518	0x84
+#define I2C_ADDR_TDA9887	0x86
+
+/*
+ * i2c bus addresses for the chips supported by tvaudio.c
+ */
+
+#define I2C_ADDR_TDA8425	0x82
+#define I2C_ADDR_TDA9840	0x84 /* also used by TA8874Z */
+#define I2C_ADDR_TDA985x_L	0xb4 /* also used by 9873 */
+#define I2C_ADDR_TDA985x_H	0xb6
+#define I2C_ADDR_TDA9874	0xb0 /* also used by 9875 */
+
+#define I2C_ADDR_TEA6300	0x80 /* also used by 6320 */
+#define I2C_ADDR_TEA6420	0x98
+
+#define I2C_ADDR_PIC16C54	0x96 /* PV951 */
diff --git a/include/media/ir-kbd-i2c.h b/include/media/ir-kbd-i2c.h
new file mode 100644
index 00000000..768aa779
--- /dev/null
+++ b/include/media/ir-kbd-i2c.h
@@ -0,0 +1,52 @@
+#ifndef _IR_I2C
+#define _IR_I2C
+
+#include <media/rc-core.h>
+
+#define DEFAULT_POLLING_INTERVAL	100	/* ms */
+
+struct IR_i2c;
+
+struct IR_i2c {
+	char		       *ir_codes;
+	struct i2c_client      *c;
+	struct rc_dev          *rc;
+
+	/* Used to avoid fast repeating */
+	unsigned char          old;
+
+	u32                    polling_interval; /* in ms */
+
+	struct delayed_work    work;
+	char                   name[32];
+	char                   phys[32];
+	int                    (*get_key)(struct IR_i2c*, u32*, u32*);
+};
+
+enum ir_kbd_get_key_fn {
+	IR_KBD_GET_KEY_CUSTOM = 0,
+	IR_KBD_GET_KEY_PIXELVIEW,
+	IR_KBD_GET_KEY_HAUP,
+	IR_KBD_GET_KEY_KNC1,
+	IR_KBD_GET_KEY_FUSIONHDTV,
+	IR_KBD_GET_KEY_HAUP_XVR,
+	IR_KBD_GET_KEY_AVERMEDIA_CARDBUS,
+};
+
+/* Can be passed when instantiating an ir_video i2c device */
+struct IR_i2c_init_data {
+	char			*ir_codes;
+	const char		*name;
+	u64			type; /* RC_TYPE_RC5, etc */
+	u32			polling_interval; /* 0 means DEFAULT_POLLING_INTERVAL */
+
+	/*
+	 * Specify either a function pointer or a value indicating one of
+	 * ir_kbd_i2c's internal get_key functions
+	 */
+	int                    (*get_key)(struct IR_i2c*, u32*, u32*);
+	enum ir_kbd_get_key_fn internal_get_key_func;
+
+	struct rc_dev		*rc_dev;
+};
+#endif
diff --git a/include/media/lirc.h b/include/media/lirc.h
new file mode 100644
index 00000000..4b3ab296
--- /dev/null
+++ b/include/media/lirc.h
@@ -0,0 +1,168 @@
+/*
+ * lirc.h - linux infrared remote control header file
+ * last modified 2010/07/13 by Jarod Wilson
+ */
+
+#ifndef _LINUX_LIRC_H
+#define _LINUX_LIRC_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+#define PULSE_BIT       0x01000000
+#define PULSE_MASK      0x00FFFFFF
+
+#define LIRC_MODE2_SPACE     0x00000000
+#define LIRC_MODE2_PULSE     0x01000000
+#define LIRC_MODE2_FREQUENCY 0x02000000
+#define LIRC_MODE2_TIMEOUT   0x03000000
+
+#define LIRC_VALUE_MASK      0x00FFFFFF
+#define LIRC_MODE2_MASK      0xFF000000
+
+#define LIRC_SPACE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_SPACE)
+#define LIRC_PULSE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_PULSE)
+#define LIRC_FREQUENCY(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY)
+#define LIRC_TIMEOUT(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT)
+
+#define LIRC_VALUE(val) ((val)&LIRC_VALUE_MASK)
+#define LIRC_MODE2(val) ((val)&LIRC_MODE2_MASK)
+
+#define LIRC_IS_SPACE(val) (LIRC_MODE2(val) == LIRC_MODE2_SPACE)
+#define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE)
+#define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY)
+#define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT)
+
+/* used heavily by lirc userspace */
+#define lirc_t int
+
+/*** lirc compatible hardware features ***/
+
+#define LIRC_MODE2SEND(x) (x)
+#define LIRC_SEND2MODE(x) (x)
+#define LIRC_MODE2REC(x) ((x) << 16)
+#define LIRC_REC2MODE(x) ((x) >> 16)
+
+#define LIRC_MODE_RAW                  0x00000001
+#define LIRC_MODE_PULSE                0x00000002
+#define LIRC_MODE_MODE2                0x00000004
+#define LIRC_MODE_LIRCCODE             0x00000010
+
+
+#define LIRC_CAN_SEND_RAW              LIRC_MODE2SEND(LIRC_MODE_RAW)
+#define LIRC_CAN_SEND_PULSE            LIRC_MODE2SEND(LIRC_MODE_PULSE)
+#define LIRC_CAN_SEND_MODE2            LIRC_MODE2SEND(LIRC_MODE_MODE2)
+#define LIRC_CAN_SEND_LIRCCODE         LIRC_MODE2SEND(LIRC_MODE_LIRCCODE)
+
+#define LIRC_CAN_SEND_MASK             0x0000003f
+
+#define LIRC_CAN_SET_SEND_CARRIER      0x00000100
+#define LIRC_CAN_SET_SEND_DUTY_CYCLE   0x00000200
+#define LIRC_CAN_SET_TRANSMITTER_MASK  0x00000400
+
+#define LIRC_CAN_REC_RAW               LIRC_MODE2REC(LIRC_MODE_RAW)
+#define LIRC_CAN_REC_PULSE             LIRC_MODE2REC(LIRC_MODE_PULSE)
+#define LIRC_CAN_REC_MODE2             LIRC_MODE2REC(LIRC_MODE_MODE2)
+#define LIRC_CAN_REC_LIRCCODE          LIRC_MODE2REC(LIRC_MODE_LIRCCODE)
+
+#define LIRC_CAN_REC_MASK              LIRC_MODE2REC(LIRC_CAN_SEND_MASK)
+
+#define LIRC_CAN_SET_REC_CARRIER       (LIRC_CAN_SET_SEND_CARRIER << 16)
+#define LIRC_CAN_SET_REC_DUTY_CYCLE    (LIRC_CAN_SET_SEND_DUTY_CYCLE << 16)
+
+#define LIRC_CAN_SET_REC_DUTY_CYCLE_RANGE 0x40000000
+#define LIRC_CAN_SET_REC_CARRIER_RANGE    0x80000000
+#define LIRC_CAN_GET_REC_RESOLUTION       0x20000000
+#define LIRC_CAN_SET_REC_TIMEOUT          0x10000000
+#define LIRC_CAN_SET_REC_FILTER           0x08000000
+
+#define LIRC_CAN_MEASURE_CARRIER          0x02000000
+#define LIRC_CAN_USE_WIDEBAND_RECEIVER    0x04000000
+
+#define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK)
+#define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK)
+
+#define LIRC_CAN_NOTIFY_DECODE            0x01000000
+
+/*** IOCTL commands for lirc driver ***/
+
+#define LIRC_GET_FEATURES              _IOR('i', 0x00000000, __u32)
+
+#define LIRC_GET_SEND_MODE             _IOR('i', 0x00000001, __u32)
+#define LIRC_GET_REC_MODE              _IOR('i', 0x00000002, __u32)
+#define LIRC_GET_SEND_CARRIER          _IOR('i', 0x00000003, __u32)
+#define LIRC_GET_REC_CARRIER           _IOR('i', 0x00000004, __u32)
+#define LIRC_GET_SEND_DUTY_CYCLE       _IOR('i', 0x00000005, __u32)
+#define LIRC_GET_REC_DUTY_CYCLE        _IOR('i', 0x00000006, __u32)
+#define LIRC_GET_REC_RESOLUTION        _IOR('i', 0x00000007, __u32)
+
+#define LIRC_GET_MIN_TIMEOUT           _IOR('i', 0x00000008, __u32)
+#define LIRC_GET_MAX_TIMEOUT           _IOR('i', 0x00000009, __u32)
+
+#define LIRC_GET_MIN_FILTER_PULSE      _IOR('i', 0x0000000a, __u32)
+#define LIRC_GET_MAX_FILTER_PULSE      _IOR('i', 0x0000000b, __u32)
+#define LIRC_GET_MIN_FILTER_SPACE      _IOR('i', 0x0000000c, __u32)
+#define LIRC_GET_MAX_FILTER_SPACE      _IOR('i', 0x0000000d, __u32)
+
+/* code length in bits, currently only for LIRC_MODE_LIRCCODE */
+#define LIRC_GET_LENGTH                _IOR('i', 0x0000000f, __u32)
+
+#define LIRC_SET_SEND_MODE             _IOW('i', 0x00000011, __u32)
+#define LIRC_SET_REC_MODE              _IOW('i', 0x00000012, __u32)
+/* Note: these can reset the according pulse_width */
+#define LIRC_SET_SEND_CARRIER          _IOW('i', 0x00000013, __u32)
+#define LIRC_SET_REC_CARRIER           _IOW('i', 0x00000014, __u32)
+#define LIRC_SET_SEND_DUTY_CYCLE       _IOW('i', 0x00000015, __u32)
+#define LIRC_SET_REC_DUTY_CYCLE        _IOW('i', 0x00000016, __u32)
+#define LIRC_SET_TRANSMITTER_MASK      _IOW('i', 0x00000017, __u32)
+
+/*
+ * when a timeout != 0 is set the driver will send a
+ * LIRC_MODE2_TIMEOUT data packet, otherwise LIRC_MODE2_TIMEOUT is
+ * never sent, timeout is disabled by default
+ */
+#define LIRC_SET_REC_TIMEOUT           _IOW('i', 0x00000018, __u32)
+
+/* 1 enables, 0 disables timeout reports in MODE2 */
+#define LIRC_SET_REC_TIMEOUT_REPORTS   _IOW('i', 0x00000019, __u32)
+
+/*
+ * pulses shorter than this are filtered out by hardware (software
+ * emulation in lirc_dev?)
+ */
+#define LIRC_SET_REC_FILTER_PULSE      _IOW('i', 0x0000001a, __u32)
+/*
+ * spaces shorter than this are filtered out by hardware (software
+ * emulation in lirc_dev?)
+ */
+#define LIRC_SET_REC_FILTER_SPACE      _IOW('i', 0x0000001b, __u32)
+/*
+ * if filter cannot be set independently for pulse/space, this should
+ * be used
+ */
+#define LIRC_SET_REC_FILTER            _IOW('i', 0x0000001c, __u32)
+
+/*
+ * if enabled from the next key press on the driver will send
+ * LIRC_MODE2_FREQUENCY packets
+ */
+#define LIRC_SET_MEASURE_CARRIER_MODE	_IOW('i', 0x0000001d, __u32)
+
+/*
+ * to set a range use
+ * LIRC_SET_REC_DUTY_CYCLE_RANGE/LIRC_SET_REC_CARRIER_RANGE with the
+ * lower bound first and later
+ * LIRC_SET_REC_DUTY_CYCLE/LIRC_SET_REC_CARRIER with the upper bound
+ */
+
+#define LIRC_SET_REC_DUTY_CYCLE_RANGE  _IOW('i', 0x0000001e, __u32)
+#define LIRC_SET_REC_CARRIER_RANGE     _IOW('i', 0x0000001f, __u32)
+
+#define LIRC_NOTIFY_DECODE             _IO('i', 0x00000020)
+
+#define LIRC_SETUP_START               _IO('i', 0x00000021)
+#define LIRC_SETUP_END                 _IO('i', 0x00000022)
+
+#define LIRC_SET_WIDEBAND_RECEIVER     _IOW('i', 0x00000023, __u32)
+
+#endif
diff --git a/include/media/lirc_dev.h b/include/media/lirc_dev.h
new file mode 100644
index 00000000..168dd0b1
--- /dev/null
+++ b/include/media/lirc_dev.h
@@ -0,0 +1,225 @@
+/*
+ * LIRC base driver
+ *
+ * by Artur Lipowski <alipowski@interia.pl>
+ *        This code is licensed under GNU GPL
+ *
+ */
+
+#ifndef _LINUX_LIRC_DEV_H
+#define _LINUX_LIRC_DEV_H
+
+#define MAX_IRCTL_DEVICES 8
+#define BUFLEN            16
+
+#define mod(n, div) ((n) % (div))
+
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/ioctl.h>
+#include <linux/poll.h>
+#include <linux/kfifo.h>
+#include <media/lirc.h>
+
+struct lirc_buffer {
+	wait_queue_head_t wait_poll;
+	spinlock_t fifo_lock;
+	unsigned int chunk_size;
+	unsigned int size; /* in chunks */
+	/* Using chunks instead of bytes pretends to simplify boundary checking
+	 * And should allow for some performance fine tunning later */
+	struct kfifo fifo;
+	u8 fifo_initialized;
+};
+
+static inline void lirc_buffer_clear(struct lirc_buffer *buf)
+{
+	unsigned long flags;
+
+	if (buf->fifo_initialized) {
+		spin_lock_irqsave(&buf->fifo_lock, flags);
+		kfifo_reset(&buf->fifo);
+		spin_unlock_irqrestore(&buf->fifo_lock, flags);
+	} else
+		WARN(1, "calling %s on an uninitialized lirc_buffer\n",
+		     __func__);
+}
+
+static inline int lirc_buffer_init(struct lirc_buffer *buf,
+				    unsigned int chunk_size,
+				    unsigned int size)
+{
+	int ret;
+
+	init_waitqueue_head(&buf->wait_poll);
+	spin_lock_init(&buf->fifo_lock);
+	buf->chunk_size = chunk_size;
+	buf->size = size;
+	ret = kfifo_alloc(&buf->fifo, size * chunk_size, GFP_KERNEL);
+	if (ret == 0)
+		buf->fifo_initialized = 1;
+
+	return ret;
+}
+
+static inline void lirc_buffer_free(struct lirc_buffer *buf)
+{
+	if (buf->fifo_initialized) {
+		kfifo_free(&buf->fifo);
+		buf->fifo_initialized = 0;
+	} else
+		WARN(1, "calling %s on an uninitialized lirc_buffer\n",
+		     __func__);
+}
+
+static inline int lirc_buffer_len(struct lirc_buffer *buf)
+{
+	int len;
+	unsigned long flags;
+
+	spin_lock_irqsave(&buf->fifo_lock, flags);
+	len = kfifo_len(&buf->fifo);
+	spin_unlock_irqrestore(&buf->fifo_lock, flags);
+
+	return len;
+}
+
+static inline int lirc_buffer_full(struct lirc_buffer *buf)
+{
+	return lirc_buffer_len(buf) == buf->size * buf->chunk_size;
+}
+
+static inline int lirc_buffer_empty(struct lirc_buffer *buf)
+{
+	return !lirc_buffer_len(buf);
+}
+
+static inline int lirc_buffer_available(struct lirc_buffer *buf)
+{
+	return buf->size - (lirc_buffer_len(buf) / buf->chunk_size);
+}
+
+static inline unsigned int lirc_buffer_read(struct lirc_buffer *buf,
+					    unsigned char *dest)
+{
+	unsigned int ret = 0;
+
+	if (lirc_buffer_len(buf) >= buf->chunk_size)
+		ret = kfifo_out_locked(&buf->fifo, dest, buf->chunk_size,
+				       &buf->fifo_lock);
+	return ret;
+
+}
+
+static inline unsigned int lirc_buffer_write(struct lirc_buffer *buf,
+					     unsigned char *orig)
+{
+	unsigned int ret;
+
+	ret = kfifo_in_locked(&buf->fifo, orig, buf->chunk_size,
+			      &buf->fifo_lock);
+
+	return ret;
+}
+
+struct lirc_driver {
+	char name[40];
+	int minor;
+	__u32 code_length;
+	unsigned int buffer_size; /* in chunks holding one code each */
+	int sample_rate;
+	__u32 features;
+
+	unsigned int chunk_size;
+
+	void *data;
+	int min_timeout;
+	int max_timeout;
+	int (*add_to_buf) (void *data, struct lirc_buffer *buf);
+	struct lirc_buffer *rbuf;
+	int (*set_use_inc) (void *data);
+	void (*set_use_dec) (void *data);
+	const struct file_operations *fops;
+	struct device *dev;
+	struct module *owner;
+};
+
+/* name:
+ * this string will be used for logs
+ *
+ * minor:
+ * indicates minor device (/dev/lirc) number for registered driver
+ * if caller fills it with negative value, then the first free minor
+ * number will be used (if available)
+ *
+ * code_length:
+ * length of the remote control key code expressed in bits
+ *
+ * sample_rate:
+ *
+ * data:
+ * it may point to any driver data and this pointer will be passed to
+ * all callback functions
+ *
+ * add_to_buf:
+ * add_to_buf will be called after specified period of the time or
+ * triggered by the external event, this behavior depends on value of
+ * the sample_rate this function will be called in user context. This
+ * routine should return 0 if data was added to the buffer and
+ * -ENODATA if none was available. This should add some number of bits
+ * evenly divisible by code_length to the buffer
+ *
+ * rbuf:
+ * if not NULL, it will be used as a read buffer, you will have to
+ * write to the buffer by other means, like irq's (see also
+ * lirc_serial.c).
+ *
+ * set_use_inc:
+ * set_use_inc will be called after device is opened
+ *
+ * set_use_dec:
+ * set_use_dec will be called after device is closed
+ *
+ * fops:
+ * file_operations for drivers which don't fit the current driver model.
+ *
+ * Some ioctl's can be directly handled by lirc_dev if the driver's
+ * ioctl function is NULL or if it returns -ENOIOCTLCMD (see also
+ * lirc_serial.c).
+ *
+ * owner:
+ * the module owning this struct
+ *
+ */
+
+
+/* following functions can be called ONLY from user context
+ *
+ * returns negative value on error or minor number
+ * of the registered device if success
+ * contents of the structure pointed by p is copied
+ */
+extern int lirc_register_driver(struct lirc_driver *d);
+
+/* returns negative value on error or 0 if success
+*/
+extern int lirc_unregister_driver(int minor);
+
+/* Returns the private data stored in the lirc_driver
+ * associated with the given device file pointer.
+ */
+void *lirc_get_pdata(struct file *file);
+
+/* default file operations
+ * used by drivers if they override only some operations
+ */
+int lirc_dev_fop_open(struct inode *inode, struct file *file);
+int lirc_dev_fop_close(struct inode *inode, struct file *file);
+unsigned int lirc_dev_fop_poll(struct file *file, poll_table *wait);
+long lirc_dev_fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
+ssize_t lirc_dev_fop_read(struct file *file, char __user *buffer, size_t length,
+			  loff_t *ppos);
+ssize_t lirc_dev_fop_write(struct file *file, const char __user *buffer,
+			   size_t length, loff_t *ppos);
+
+#endif
diff --git a/include/media/m52790.h b/include/media/m52790.h
new file mode 100644
index 00000000..7ddffae3
--- /dev/null
+++ b/include/media/m52790.h
@@ -0,0 +1,93 @@
+/*
+    m52790.h - definition for m52790 inputs and outputs
+
+    Copyright (C) 2007 Hans Verkuil (hverkuil@xs4all.nl)
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _M52790_H_
+#define _M52790_H_
+
+/* Input routing switch 1 */
+
+#define M52790_SW1_IN_MASK 	0x0003
+#define M52790_SW1_IN_TUNER 	0x0000
+#define M52790_SW1_IN_V2    	0x0001
+#define M52790_SW1_IN_V3    	0x0002
+#define M52790_SW1_IN_V4    	0x0003
+
+/* Selects component input instead of composite */
+#define M52790_SW1_YCMIX    	0x0004
+
+
+/* Input routing switch 2 */
+
+#define M52790_SW2_IN_MASK 	0x0300
+#define M52790_SW2_IN_TUNER 	0x0000
+#define M52790_SW2_IN_V2    	0x0100
+#define M52790_SW2_IN_V3    	0x0200
+#define M52790_SW2_IN_V4    	0x0300
+
+/* Selects component input instead of composite */
+#define M52790_SW2_YCMIX    	0x0400
+
+
+/* Output routing switch 1 */
+
+/* Enable 6dB amplifier for composite out */
+#define M52790_SW1_V_AMP    	0x0008
+
+/* Enable 6dB amplifier for component out */
+#define M52790_SW1_YC_AMP   	0x0010
+
+/* Audio output mode */
+#define M52790_SW1_AUDIO_MASK 	0x00c0
+#define M52790_SW1_AUDIO_MUTE 	0x0000
+#define M52790_SW1_AUDIO_R 	0x0040
+#define M52790_SW1_AUDIO_L 	0x0080
+#define M52790_SW1_AUDIO_STEREO 0x00c0
+
+
+/* Output routing switch 2 */
+
+/* Enable 6dB amplifier for composite out */
+#define M52790_SW2_V_AMP    	0x0800
+
+/* Enable 6dB amplifier for component out */
+#define M52790_SW2_YC_AMP   	0x1000
+
+/* Audio output mode */
+#define M52790_SW2_AUDIO_MASK 	0xc000
+#define M52790_SW2_AUDIO_MUTE 	0x0000
+#define M52790_SW2_AUDIO_R 	0x4000
+#define M52790_SW2_AUDIO_L 	0x8000
+#define M52790_SW2_AUDIO_STEREO 0xc000
+
+
+/* Common values */
+#define M52790_IN_TUNER (M52790_SW1_IN_TUNER | M52790_SW2_IN_TUNER)
+#define M52790_IN_V2    (M52790_SW1_IN_V2 | M52790_SW2_IN_V2)
+#define M52790_IN_V3    (M52790_SW1_IN_V3 | M52790_SW2_IN_V3)
+#define M52790_IN_V4    (M52790_SW1_IN_V4 | M52790_SW2_IN_V4)
+
+#define M52790_OUT_STEREO 	(M52790_SW1_AUDIO_STEREO | \
+				 M52790_SW2_AUDIO_STEREO)
+#define M52790_OUT_AMP_STEREO 	(M52790_SW1_AUDIO_STEREO | \
+				 M52790_SW1_V_AMP | \
+				 M52790_SW2_AUDIO_STEREO | \
+				 M52790_SW2_V_AMP)
+
+#endif
diff --git a/include/media/m5mols.h b/include/media/m5mols.h
new file mode 100644
index 00000000..4a825ae5
--- /dev/null
+++ b/include/media/m5mols.h
@@ -0,0 +1,33 @@
+/*
+ * Driver header for M-5MOLS 8M Pixel camera sensor with ISP
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
+ *
+ * Copyright (C) 2009 Samsung Electronics Co., Ltd.
+ * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef MEDIA_M5MOLS_H
+#define MEDIA_M5MOLS_H
+
+/**
+ * struct m5mols_platform_data - platform data for M-5MOLS driver
+ * @gpio_reset:	GPIO driving the reset pin of M-5MOLS
+ * @reset_polarity: active state for gpio_reset pin, 0 or 1
+ * @set_power:	an additional callback to the board setup code
+ *		to be called after enabling and before disabling
+ *		the sensor's supply regulators
+ */
+struct m5mols_platform_data {
+	int gpio_reset;
+	u8 reset_polarity;
+	int (*set_power)(struct device *dev, int on);
+};
+
+#endif	/* MEDIA_M5MOLS_H */
diff --git a/include/media/media-device.h b/include/media/media-device.h
new file mode 100644
index 00000000..eaade981
--- /dev/null
+++ b/include/media/media-device.h
@@ -0,0 +1,96 @@
+/*
+ * Media device
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _MEDIA_DEVICE_H
+#define _MEDIA_DEVICE_H
+
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+
+#include <media/media-devnode.h>
+#include <media/media-entity.h>
+
+struct device;
+
+/**
+ * struct media_device - Media device
+ * @dev:	Parent device
+ * @devnode:	Media device node
+ * @model:	Device model name
+ * @serial:	Device serial number (optional)
+ * @bus_info:	Unique and stable device location identifier
+ * @hw_revision: Hardware device revision
+ * @driver_version: Device driver version
+ * @entity_id:	ID of the next entity to be registered
+ * @entities:	List of registered entities
+ * @lock:	Entities list lock
+ * @graph_mutex: Entities graph operation lock
+ *
+ * This structure represents an abstract high-level media device. It allows easy
+ * access to entities and provides basic media device-level support. The
+ * structure can be allocated directly or embedded in a larger structure.
+ *
+ * The parent @dev is a physical device. It must be set before registering the
+ * media device.
+ *
+ * @model is a descriptive model name exported through sysfs. It doesn't have to
+ * be unique.
+ */
+struct media_device {
+	/* dev->driver_data points to this struct. */
+	struct device *dev;
+	struct media_devnode devnode;
+
+	char model[32];
+	char serial[40];
+	char bus_info[32];
+	u32 hw_revision;
+	u32 driver_version;
+
+	u32 entity_id;
+	struct list_head entities;
+
+	/* Protects the entities list */
+	spinlock_t lock;
+	/* Serializes graph operations. */
+	struct mutex graph_mutex;
+
+	int (*link_notify)(struct media_pad *source,
+			   struct media_pad *sink, u32 flags);
+};
+
+/* media_devnode to media_device */
+#define to_media_device(node) container_of(node, struct media_device, devnode)
+
+int __must_check media_device_register(struct media_device *mdev);
+void media_device_unregister(struct media_device *mdev);
+
+int __must_check media_device_register_entity(struct media_device *mdev,
+					      struct media_entity *entity);
+void media_device_unregister_entity(struct media_entity *entity);
+
+/* Iterate over all entities. */
+#define media_device_for_each_entity(entity, mdev)			\
+	list_for_each_entry(entity, &(mdev)->entities, list)
+
+#endif
diff --git a/include/media/media-devnode.h b/include/media/media-devnode.h
new file mode 100644
index 00000000..f6caafc8
--- /dev/null
+++ b/include/media/media-devnode.h
@@ -0,0 +1,97 @@
+/*
+ * Media device node
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * --
+ *
+ * Common functions for media-related drivers to register and unregister media
+ * device nodes.
+ */
+
+#ifndef _MEDIA_DEVNODE_H
+#define _MEDIA_DEVNODE_H
+
+#include <linux/poll.h>
+#include <linux/fs.h>
+#include <linux/device.h>
+#include <linux/cdev.h>
+
+/*
+ * Flag to mark the media_devnode struct as registered. Drivers must not touch
+ * this flag directly, it will be set and cleared by media_devnode_register and
+ * media_devnode_unregister.
+ */
+#define MEDIA_FLAG_REGISTERED	0
+
+struct media_file_operations {
+	struct module *owner;
+	ssize_t (*read) (struct file *, char __user *, size_t, loff_t *);
+	ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *);
+	unsigned int (*poll) (struct file *, struct poll_table_struct *);
+	long (*ioctl) (struct file *, unsigned int, unsigned long);
+	int (*open) (struct file *);
+	int (*release) (struct file *);
+};
+
+/**
+ * struct media_devnode - Media device node
+ * @parent:	parent device
+ * @minor:	device node minor number
+ * @flags:	flags, combination of the MEDIA_FLAG_* constants
+ *
+ * This structure represents a media-related device node.
+ *
+ * The @parent is a physical device. It must be set by core or device drivers
+ * before registering the node.
+ */
+struct media_devnode {
+	/* device ops */
+	const struct media_file_operations *fops;
+
+	/* sysfs */
+	struct device dev;		/* media device */
+	struct cdev cdev;		/* character device */
+	struct device *parent;		/* device parent */
+
+	/* device info */
+	int minor;
+	unsigned long flags;		/* Use bitops to access flags */
+
+	/* callbacks */
+	void (*release)(struct media_devnode *mdev);
+};
+
+/* dev to media_devnode */
+#define to_media_devnode(cd) container_of(cd, struct media_devnode, dev)
+
+int __must_check media_devnode_register(struct media_devnode *mdev);
+void media_devnode_unregister(struct media_devnode *mdev);
+
+static inline struct media_devnode *media_devnode_data(struct file *filp)
+{
+	return filp->private_data;
+}
+
+static inline int media_devnode_is_registered(struct media_devnode *mdev)
+{
+	return test_bit(MEDIA_FLAG_REGISTERED, &mdev->flags);
+}
+
+#endif /* _MEDIA_DEVNODE_H */
diff --git a/include/media/media-entity.h b/include/media/media-entity.h
new file mode 100644
index 00000000..29e7bba7
--- /dev/null
+++ b/include/media/media-entity.h
@@ -0,0 +1,151 @@
+/*
+ * Media entity
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _MEDIA_ENTITY_H
+#define _MEDIA_ENTITY_H
+
+#include <linux/list.h>
+#include <linux/media.h>
+
+struct media_pipeline {
+};
+
+struct media_link {
+	struct media_pad *source;	/* Source pad */
+	struct media_pad *sink;		/* Sink pad  */
+	struct media_link *reverse;	/* Link in the reverse direction */
+	unsigned long flags;		/* Link flags (MEDIA_LNK_FL_*) */
+};
+
+struct media_pad {
+	struct media_entity *entity;	/* Entity this pad belongs to */
+	u16 index;			/* Pad index in the entity pads array */
+	unsigned long flags;		/* Pad flags (MEDIA_PAD_FL_*) */
+};
+
+struct media_entity_operations {
+	int (*link_setup)(struct media_entity *entity,
+			  const struct media_pad *local,
+			  const struct media_pad *remote, u32 flags);
+};
+
+struct media_entity {
+	struct list_head list;
+	struct media_device *parent;	/* Media device this entity belongs to*/
+	u32 id;				/* Entity ID, unique in the parent media
+					 * device context */
+	const char *name;		/* Entity name */
+	u32 type;			/* Entity type (MEDIA_ENT_T_*) */
+	u32 revision;			/* Entity revision, driver specific */
+	unsigned long flags;		/* Entity flags (MEDIA_ENT_FL_*) */
+	u32 group_id;			/* Entity group ID */
+
+	u16 num_pads;			/* Number of sink and source pads */
+	u16 num_links;			/* Number of existing links, both
+					 * enabled and disabled */
+	u16 num_backlinks;		/* Number of backlinks */
+	u16 max_links;			/* Maximum number of links */
+
+	struct media_pad *pads;		/* Pads array (num_pads elements) */
+	struct media_link *links;	/* Links array (max_links elements)*/
+
+	const struct media_entity_operations *ops;	/* Entity operations */
+
+	/* Reference counts must never be negative, but are signed integers on
+	 * purpose: a simple WARN_ON(<0) check can be used to detect reference
+	 * count bugs that would make them negative.
+	 */
+	int stream_count;		/* Stream count for the entity. */
+	int use_count;			/* Use count for the entity. */
+
+	struct media_pipeline *pipe;	/* Pipeline this entity belongs to. */
+
+	union {
+		/* Node specifications */
+		struct {
+			u32 major;
+			u32 minor;
+		} v4l;
+		struct {
+			u32 major;
+			u32 minor;
+		} fb;
+		struct {
+			u32 card;
+			u32 device;
+			u32 subdevice;
+		} alsa;
+		int dvb;
+
+		/* Sub-device specifications */
+		/* Nothing needed yet */
+	} info;
+};
+
+static inline u32 media_entity_type(struct media_entity *entity)
+{
+	return entity->type & MEDIA_ENT_TYPE_MASK;
+}
+
+static inline u32 media_entity_subtype(struct media_entity *entity)
+{
+	return entity->type & MEDIA_ENT_SUBTYPE_MASK;
+}
+
+#define MEDIA_ENTITY_ENUM_MAX_DEPTH	16
+
+struct media_entity_graph {
+	struct {
+		struct media_entity *entity;
+		int link;
+	} stack[MEDIA_ENTITY_ENUM_MAX_DEPTH];
+	int top;
+};
+
+int media_entity_init(struct media_entity *entity, u16 num_pads,
+		struct media_pad *pads, u16 extra_links);
+void media_entity_cleanup(struct media_entity *entity);
+
+int media_entity_create_link(struct media_entity *source, u16 source_pad,
+		struct media_entity *sink, u16 sink_pad, u32 flags);
+int __media_entity_setup_link(struct media_link *link, u32 flags);
+int media_entity_setup_link(struct media_link *link, u32 flags);
+struct media_link *media_entity_find_link(struct media_pad *source,
+		struct media_pad *sink);
+struct media_pad *media_entity_remote_source(struct media_pad *pad);
+
+struct media_entity *media_entity_get(struct media_entity *entity);
+void media_entity_put(struct media_entity *entity);
+
+void media_entity_graph_walk_start(struct media_entity_graph *graph,
+		struct media_entity *entity);
+struct media_entity *
+media_entity_graph_walk_next(struct media_entity_graph *graph);
+void media_entity_pipeline_start(struct media_entity *entity,
+		struct media_pipeline *pipe);
+void media_entity_pipeline_stop(struct media_entity *entity);
+
+#define media_entity_call(entity, operation, args...)			\
+	(((entity)->ops && (entity)->ops->operation) ?			\
+	 (entity)->ops->operation((entity) , ##args) : -ENOIOCTLCMD)
+
+#endif
diff --git a/include/media/mmp-camera.h b/include/media/mmp-camera.h
new file mode 100644
index 00000000..7611963a
--- /dev/null
+++ b/include/media/mmp-camera.h
@@ -0,0 +1,9 @@
+/*
+ * Information for the Marvell Armada MMP camera
+ */
+
+struct mmp_camera_platform_data {
+	struct platform_device *i2c_device;
+	int sensor_power_gpio;
+	int sensor_reset_gpio;
+};
diff --git a/include/media/msp3400.h b/include/media/msp3400.h
new file mode 100644
index 00000000..90cf22ad
--- /dev/null
+++ b/include/media/msp3400.h
@@ -0,0 +1,226 @@
+/*
+    msp3400.h - definition for msp3400 inputs and outputs
+
+    Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl)
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _MSP3400_H_
+#define _MSP3400_H_
+
+/* msp3400 routing
+   ===============
+
+   The msp3400 has a complicated routing scheme with many possible
+   combinations. The details are all in the datasheets but I will try
+   to give a short description here.
+
+   Inputs
+   ======
+
+   There are 1) tuner inputs, 2) I2S inputs, 3) SCART inputs. You will have
+   to select which tuner input to use and which SCART input to use. The
+   selected tuner input, the selected SCART input and all I2S inputs go to
+   the DSP (the tuner input first goes through the demodulator).
+
+   The DSP handles things like volume, bass/treble, balance, and some chips
+   have support for surround sound. It has several outputs: MAIN, AUX, I2S
+   and SCART1/2. Each output can select which DSP input to use. So the MAIN
+   output can select the tuner input while at the same time the SCART1 output
+   uses the I2S input.
+
+   Outputs
+   =======
+
+   Most DSP outputs are also the outputs of the msp3400. However, the SCART
+   outputs of the msp3400 can select which input to use: either the SCART1 or
+   SCART2 output from the DSP, or the msp3400 SCART inputs, thus completely
+   bypassing the DSP.
+
+   Summary
+   =======
+
+   So to specify a complete routing scheme for the msp3400 you will have to
+   specify in the 'input' arg of the s_routing function:
+
+   1) which tuner input to use
+   2) which SCART input to use
+   3) which DSP input to use for each DSP output
+
+   And in the 'output' arg of the s_routing function you specify:
+
+   1) which SCART input to use for each SCART output
+
+   Depending on how the msp is wired to the other components you can
+   ignore or mute certain inputs or outputs.
+
+   Also, depending on the msp version only a subset of the inputs or
+   outputs may be present. At the end of this header some tables are
+   added containing a list of what is available for each msp version.
+ */
+
+/* Inputs to the DSP unit: two independent selections have to be made:
+   1) the tuner (SIF) input
+   2) the SCART input
+   Bits 0-2 are used for the SCART input select, bit 3 is used for the tuner
+   input, bits 4-7 are reserved.
+ */
+
+/* SCART input to DSP selection */
+#define MSP_IN_SCART1  		0  /* Pin SC1_IN */
+#define MSP_IN_SCART2  		1  /* Pin SC2_IN */
+#define MSP_IN_SCART3  		2  /* Pin SC3_IN */
+#define MSP_IN_SCART4  		3  /* Pin SC4_IN */
+#define MSP_IN_MONO     	6  /* Pin MONO_IN */
+#define MSP_IN_MUTE     	7  /* Mute DSP input */
+#define MSP_SCART_TO_DSP(in) 	(in)
+/* Tuner input to demodulator and DSP selection */
+#define MSP_IN_TUNER1 		0  /* Analog Sound IF input pin ANA_IN1 */
+#define MSP_IN_TUNER2 		1  /* Analog Sound IF input pin ANA_IN2 */
+#define MSP_TUNER_TO_DSP(in) 	((in) << 3)
+
+/* The msp has up to 5 DSP outputs, each output can independently select
+   a DSP input.
+
+   The DSP outputs are: loudspeaker output (aka MAIN), headphones output
+   (aka AUX), SCART1 DA output, SCART2 DA output and an I2S output.
+   There also is a quasi-peak detector output, but that is not used by
+   this driver and is set to the same input as the loudspeaker output.
+   Not all outputs are supported by all msp models. Setting the input
+   of an unsupported output will be ignored by the driver.
+
+   There are up to 16 DSP inputs to choose from, so each output is
+   assigned 4 bits.
+
+   Note: the 44x8G can mix two inputs and feed the result back to the
+   DSP. This is currently not implemented. Also not implemented is the
+   multi-channel capable I2S3 input of the 44x0G. If someone can demonstrate
+   a need for one of those features then additional support can be added. */
+#define MSP_DSP_IN_TUNER 	0  /* Tuner DSP input */
+#define MSP_DSP_IN_SCART 	2  /* SCART DSP input */
+#define MSP_DSP_IN_I2S1 	5  /* I2S1 DSP input */
+#define MSP_DSP_IN_I2S2 	6  /* I2S2 DSP input */
+#define MSP_DSP_IN_I2S3    	7  /* I2S3 DSP input */
+#define MSP_DSP_IN_MAIN_AVC 	11 /* MAIN AVC processed DSP input */
+#define MSP_DSP_IN_MAIN 	12 /* MAIN DSP input */
+#define MSP_DSP_IN_AUX 		13 /* AUX DSP input */
+#define MSP_DSP_TO_MAIN(in)   	((in) << 4)
+#define MSP_DSP_TO_AUX(in)    	((in) << 8)
+#define MSP_DSP_TO_SCART1(in) 	((in) << 12)
+#define MSP_DSP_TO_SCART2(in) 	((in) << 16)
+#define MSP_DSP_TO_I2S(in)    	((in) << 20)
+
+/* Output SCART select: the SCART outputs can select which input
+   to use. */
+#define MSP_SC_IN_SCART1 	0  /* SCART1 input, bypassing the DSP */
+#define MSP_SC_IN_SCART2 	1  /* SCART2 input, bypassing the DSP */
+#define MSP_SC_IN_SCART3 	2  /* SCART3 input, bypassing the DSP */
+#define MSP_SC_IN_SCART4 	3  /* SCART4 input, bypassing the DSP */
+#define MSP_SC_IN_DSP_SCART1 	4  /* DSP SCART1 input */
+#define MSP_SC_IN_DSP_SCART2 	5  /* DSP SCART2 input */
+#define MSP_SC_IN_MONO 		6  /* MONO input, bypassing the DSP */
+#define MSP_SC_IN_MUTE 		7  /* MUTE output */
+#define MSP_SC_TO_SCART1(in)	(in)
+#define MSP_SC_TO_SCART2(in)	((in) << 4)
+
+/* Shortcut macros */
+#define MSP_INPUT(sc, t, main_aux_src, sc_i2s_src) \
+	(MSP_SCART_TO_DSP(sc) | \
+	 MSP_TUNER_TO_DSP(t) | \
+	 MSP_DSP_TO_MAIN(main_aux_src) | \
+	 MSP_DSP_TO_AUX(main_aux_src) | \
+	 MSP_DSP_TO_SCART1(sc_i2s_src) | \
+	 MSP_DSP_TO_SCART2(sc_i2s_src) | \
+	 MSP_DSP_TO_I2S(sc_i2s_src))
+#define MSP_INPUT_DEFAULT MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, \
+				    MSP_DSP_IN_TUNER, MSP_DSP_IN_TUNER)
+#define MSP_OUTPUT(sc) \
+	(MSP_SC_TO_SCART1(sc) | \
+	 MSP_SC_TO_SCART2(sc))
+/* This equals the RESET position of the msp3400 ACB register */
+#define MSP_OUTPUT_DEFAULT (MSP_SC_TO_SCART1(MSP_SC_IN_SCART3) | \
+			    MSP_SC_TO_SCART2(MSP_SC_IN_DSP_SCART1))
+
+/* Tuner inputs vs. msp version */
+/* Chip      TUNER_1   TUNER_2
+   -------------------------
+   msp34x0b  y         y
+   msp34x0c  y         y
+   msp34x0d  y         y
+   msp34x5d  y         n
+   msp34x7d  y         n
+   msp34x0g  y         y
+   msp34x1g  y         y
+   msp34x2g  y         y
+   msp34x5g  y         n
+   msp34x7g  y         n
+   msp44x0g  y         y
+   msp44x8g  y         y
+ */
+
+/* SCART inputs vs. msp version */
+/* Chip      SC1 SC2 SC3 SC4
+   -------------------------
+   msp34x0b  y   y   y   n
+   msp34x0c  y   y   y   n
+   msp34x0d  y   y   y   y
+   msp34x5d  y   y   n   n
+   msp34x7d  y   n   n   n
+   msp34x0g  y   y   y   y
+   msp34x1g  y   y   y   y
+   msp34x2g  y   y   y   y
+   msp34x5g  y   y   n   n
+   msp34x7g  y   n   n   n
+   msp44x0g  y   y   y   y
+   msp44x8g  y   y   y   y
+ */
+
+/* DSP inputs vs. msp version (tuner and SCART inputs are always available) */
+/* Chip      I2S1 I2S2 I2S3 MAIN_AVC MAIN AUX
+   ------------------------------------------
+   msp34x0b  y    n    n    n        n    n
+   msp34x0c  y    y    n    n        n    n
+   msp34x0d  y    y    n    n        n    n
+   msp34x5d  y    y    n    n        n    n
+   msp34x7d  n    n    n    n        n    n
+   msp34x0g  y    y    n    n        n    n
+   msp34x1g  y    y    n    n        n    n
+   msp34x2g  y    y    n    y        y    y
+   msp34x5g  y    y    n    n        n    n
+   msp34x7g  n    n    n    n        n    n
+   msp44x0g  y    y    y    y        y    y
+   msp44x8g  y    y    y    n        n    n
+ */
+
+/* DSP outputs vs. msp version */
+/* Chip      MAIN AUX SCART1 SCART2 I2S
+   ------------------------------------
+   msp34x0b  y    y   y      n      y
+   msp34x0c  y    y   y      n      y
+   msp34x0d  y    y   y      y      y
+   msp34x5d  y    n   y      n      y
+   msp34x7d  y    n   y      n      n
+   msp34x0g  y    y   y      y      y
+   msp34x1g  y    y   y      y      y
+   msp34x2g  y    y   y      y      y
+   msp34x5g  y    n   y      n      y
+   msp34x7g  y    n   y      n      n
+   msp44x0g  y    y   y      y      y
+   msp44x8g  y    y   y      y      y
+ */
+
+#endif /* MSP3400_H */
+
diff --git a/include/media/mt9m032.h b/include/media/mt9m032.h
new file mode 100644
index 00000000..c3a78114
--- /dev/null
+++ b/include/media/mt9m032.h
@@ -0,0 +1,36 @@
+/*
+ * Driver for MT9M032 CMOS Image Sensor from Micron
+ *
+ * Copyright (C) 2010-2011 Lund Engineering
+ * Contact: Gil Lund <gwlund@lundeng.com>
+ * Author: Martin Hostettler <martin@neutronstar.dyndns.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef MT9M032_H
+#define MT9M032_H
+
+#define MT9M032_NAME		"mt9m032"
+#define MT9M032_I2C_ADDR	(0xb8 >> 1)
+
+struct mt9m032_platform_data {
+	u32 ext_clock;
+	u32 pix_clock;
+	bool invert_pixclock;
+
+};
+#endif /* MT9M032_H */
diff --git a/include/media/mt9p031.h b/include/media/mt9p031.h
new file mode 100644
index 00000000..96448c7a
--- /dev/null
+++ b/include/media/mt9p031.h
@@ -0,0 +1,19 @@
+#ifndef MT9P031_H
+#define MT9P031_H
+
+struct v4l2_subdev;
+
+enum {
+	MT9P031_COLOR_VERSION,
+	MT9P031_MONOCHROME_VERSION,
+};
+
+struct mt9p031_platform_data {
+	int (*set_xclk)(struct v4l2_subdev *subdev, int hz);
+	int (*reset)(struct v4l2_subdev *subdev, int active);
+	int ext_freq; /* input frequency to the mt9p031 for PLL dividers */
+	int target_freq; /* frequency target for the PLL */
+	int version; /* MT9P031_COLOR_VERSION or MT9P031_MONOCHROME_VERSION */
+};
+
+#endif
diff --git a/include/media/mt9t001.h b/include/media/mt9t001.h
new file mode 100644
index 00000000..e839a78b
--- /dev/null
+++ b/include/media/mt9t001.h
@@ -0,0 +1,8 @@
+#ifndef _MEDIA_MT9T001_H
+#define _MEDIA_MT9T001_H
+
+struct mt9t001_platform_data {
+	unsigned int clk_pol:1;
+};
+
+#endif
diff --git a/include/media/mt9t112.h b/include/media/mt9t112.h
new file mode 100644
index 00000000..a43c74ab
--- /dev/null
+++ b/include/media/mt9t112.h
@@ -0,0 +1,30 @@
+/* mt9t112 Camera
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MT9T112_H__
+#define __MT9T112_H__
+
+#define MT9T112_FLAG_PCLK_RISING_EDGE	(1 << 0)
+#define MT9T112_FLAG_DATAWIDTH_8	(1 << 1) /* default width is 10 */
+
+struct mt9t112_pll_divider {
+	u8 m, n;
+	u8 p1, p2, p3, p4, p5, p6, p7;
+};
+
+/*
+ * mt9t112 camera info
+ */
+struct mt9t112_camera_info {
+	u32 flags;
+	struct mt9t112_pll_divider divider;
+};
+
+#endif /* __MT9T112_H__ */
diff --git a/include/media/mt9v011.h b/include/media/mt9v011.h
new file mode 100644
index 00000000..ea29fc74
--- /dev/null
+++ b/include/media/mt9v011.h
@@ -0,0 +1,17 @@
+/* mt9v011 sensor
+ *
+ * Copyright (C) 2011 Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MT9V011_H__
+#define __MT9V011_H__
+
+struct mt9v011_platform_data {
+	unsigned xtal;	/* Hz */
+};
+
+#endif
diff --git a/include/media/mt9v032.h b/include/media/mt9v032.h
new file mode 100644
index 00000000..5e27f9be
--- /dev/null
+++ b/include/media/mt9v032.h
@@ -0,0 +1,12 @@
+#ifndef _MEDIA_MT9V032_H
+#define _MEDIA_MT9V032_H
+
+struct v4l2_subdev;
+
+struct mt9v032_platform_data {
+	unsigned int clk_pol:1;
+
+	void (*set_clock)(struct v4l2_subdev *subdev, unsigned int rate);
+};
+
+#endif
diff --git a/include/media/noon010pc30.h b/include/media/noon010pc30.h
new file mode 100644
index 00000000..58eafee3
--- /dev/null
+++ b/include/media/noon010pc30.h
@@ -0,0 +1,28 @@
+/*
+ * Driver header for NOON010PC30L camera sensor chip.
+ *
+ * Copyright (c) 2010 Samsung Electronics, Co. Ltd
+ * Contact: Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef NOON010PC30_H
+#define NOON010PC30_H
+
+/**
+ * @clk_rate: the clock frequency in Hz
+ * @gpio_nreset: GPIO driving nRESET pin
+ * @gpio_nstby: GPIO driving nSTBY pin
+ */
+
+struct noon010pc30_platform_data {
+	unsigned long clk_rate;
+	int gpio_nreset;
+	int gpio_nstby;
+};
+
+#endif /* NOON010PC30_H */
diff --git a/include/media/omap1_camera.h b/include/media/omap1_camera.h
new file mode 100644
index 00000000..819767cf
--- /dev/null
+++ b/include/media/omap1_camera.h
@@ -0,0 +1,35 @@
+/*
+ * Header for V4L2 SoC Camera driver for OMAP1 Camera Interface
+ *
+ * Copyright (C) 2010, Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MEDIA_OMAP1_CAMERA_H_
+#define __MEDIA_OMAP1_CAMERA_H_
+
+#include <linux/bitops.h>
+
+#define OMAP1_CAMERA_IOSIZE		0x1c
+
+enum omap1_cam_vb_mode {
+	OMAP1_CAM_DMA_CONTIG = 0,
+	OMAP1_CAM_DMA_SG,
+};
+
+#define OMAP1_CAMERA_MIN_BUF_COUNT(x)	((x) == OMAP1_CAM_DMA_CONTIG ? 3 : 2)
+
+struct omap1_cam_platform_data {
+	unsigned long	camexclk_khz;
+	unsigned long	lclk_khz_max;
+	unsigned long	flags;
+};
+
+#define OMAP1_CAMERA_LCLK_RISING	BIT(0)
+#define OMAP1_CAMERA_RST_LOW		BIT(1)
+#define OMAP1_CAMERA_RST_HIGH		BIT(2)
+
+#endif /* __MEDIA_OMAP1_CAMERA_H_ */
diff --git a/include/media/omap3isp.h b/include/media/omap3isp.h
new file mode 100644
index 00000000..042849a3
--- /dev/null
+++ b/include/media/omap3isp.h
@@ -0,0 +1,140 @@
+/*
+ * omap3isp.h
+ *
+ * TI OMAP3 ISP - Platform data
+ *
+ * Copyright (C) 2011 Nokia Corporation
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __MEDIA_OMAP3ISP_H__
+#define __MEDIA_OMAP3ISP_H__
+
+struct i2c_board_info;
+struct isp_device;
+
+enum isp_interface_type {
+	ISP_INTERFACE_PARALLEL,
+	ISP_INTERFACE_CSI2A_PHY2,
+	ISP_INTERFACE_CCP2B_PHY1,
+	ISP_INTERFACE_CCP2B_PHY2,
+	ISP_INTERFACE_CSI2C_PHY1,
+};
+
+enum {
+	ISP_BRIDGE_DISABLE = 0,
+	ISP_BRIDGE_LITTLE_ENDIAN = 2,
+	ISP_BRIDGE_BIG_ENDIAN = 3,
+};
+
+enum {
+	ISP_LANE_SHIFT_0 = 0,
+	ISP_LANE_SHIFT_2 = 1,
+	ISP_LANE_SHIFT_4 = 2,
+	ISP_LANE_SHIFT_6 = 3,
+};
+
+/**
+ * struct isp_parallel_platform_data - Parallel interface platform data
+ * @data_lane_shift: Data lane shifter
+ *		ISP_LANE_SHIFT_0 - CAMEXT[13:0] -> CAM[13:0]
+ *		ISP_LANE_SHIFT_2 - CAMEXT[13:2] -> CAM[11:0]
+ *		ISP_LANE_SHIFT_4 - CAMEXT[13:4] -> CAM[9:0]
+ *		ISP_LANE_SHIFT_6 - CAMEXT[13:6] -> CAM[7:0]
+ * @clk_pol: Pixel clock polarity
+ *		0 - Sample on rising edge, 1 - Sample on falling edge
+ * @hs_pol: Horizontal synchronization polarity
+ *		0 - Active high, 1 - Active low
+ * @vs_pol: Vertical synchronization polarity
+ *		0 - Active high, 1 - Active low
+ * @bridge: CCDC Bridge input control
+ *		ISP_BRIDGE_DISABLE - Disable
+ *		ISP_BRIDGE_LITTLE_ENDIAN - Little endian
+ *		ISP_BRIDGE_BIG_ENDIAN - Big endian
+ */
+struct isp_parallel_platform_data {
+	unsigned int data_lane_shift:2;
+	unsigned int clk_pol:1;
+	unsigned int hs_pol:1;
+	unsigned int vs_pol:1;
+	unsigned int bridge:2;
+};
+
+enum {
+	ISP_CCP2_PHY_DATA_CLOCK = 0,
+	ISP_CCP2_PHY_DATA_STROBE = 1,
+};
+
+enum {
+	ISP_CCP2_MODE_MIPI = 0,
+	ISP_CCP2_MODE_CCP2 = 1,
+};
+
+/**
+ * struct isp_ccp2_platform_data - CCP2 interface platform data
+ * @strobe_clk_pol: Strobe/clock polarity
+ *		0 - Non Inverted, 1 - Inverted
+ * @crc: Enable the cyclic redundancy check
+ * @ccp2_mode: Enable CCP2 compatibility mode
+ *		ISP_CCP2_MODE_MIPI - MIPI-CSI1 mode
+ *		ISP_CCP2_MODE_CCP2 - CCP2 mode
+ * @phy_layer: Physical layer selection
+ *		ISP_CCP2_PHY_DATA_CLOCK - Data/clock physical layer
+ *		ISP_CCP2_PHY_DATA_STROBE - Data/strobe physical layer
+ * @vpclk_div: Video port output clock control
+ */
+struct isp_ccp2_platform_data {
+	unsigned int strobe_clk_pol:1;
+	unsigned int crc:1;
+	unsigned int ccp2_mode:1;
+	unsigned int phy_layer:1;
+	unsigned int vpclk_div:2;
+};
+
+/**
+ * struct isp_csi2_platform_data - CSI2 interface platform data
+ * @crc: Enable the cyclic redundancy check
+ * @vpclk_div: Video port output clock control
+ */
+struct isp_csi2_platform_data {
+	unsigned crc:1;
+	unsigned vpclk_div:2;
+};
+
+struct isp_subdev_i2c_board_info {
+	struct i2c_board_info *board_info;
+	int i2c_adapter_id;
+};
+
+struct isp_v4l2_subdevs_group {
+	struct isp_subdev_i2c_board_info *subdevs;
+	enum isp_interface_type interface;
+	union {
+		struct isp_parallel_platform_data parallel;
+		struct isp_ccp2_platform_data ccp2;
+		struct isp_csi2_platform_data csi2;
+	} bus; /* gcc < 4.6.0 chokes on anonymous union initializers */
+};
+
+struct isp_platform_data {
+	struct isp_v4l2_subdevs_group *subdevs;
+	void (*set_constraints)(struct isp_device *isp, bool enable);
+};
+
+#endif	/* __MEDIA_OMAP3ISP_H__ */
diff --git a/include/media/ov7670.h b/include/media/ov7670.h
new file mode 100644
index 00000000..b133bc12
--- /dev/null
+++ b/include/media/ov7670.h
@@ -0,0 +1,20 @@
+/*
+ * A V4L2 driver for OmniVision OV7670 cameras.
+ *
+ * Copyright 2010 One Laptop Per Child
+ *
+ * This file may be distributed under the terms of the GNU General
+ * Public License, version 2.
+ */
+
+#ifndef __OV7670_H
+#define __OV7670_H
+
+struct ov7670_config {
+	int min_width;			/* Filter out smaller sizes */
+	int min_height;			/* Filter out smaller sizes */
+	int clock_speed;		/* External clock speed (MHz) */
+	bool use_smbus;			/* Use smbus I/O instead of I2C */
+};
+
+#endif
diff --git a/include/media/ov772x.h b/include/media/ov772x.h
new file mode 100644
index 00000000..00dbb7c4
--- /dev/null
+++ b/include/media/ov772x.h
@@ -0,0 +1,59 @@
+/*
+ * ov772x Camera
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OV772X_H__
+#define __OV772X_H__
+
+/* for flags */
+#define OV772X_FLAG_VFLIP	(1 << 0) /* Vertical flip image */
+#define OV772X_FLAG_HFLIP	(1 << 1) /* Horizontal flip image */
+
+/*
+ * for Edge ctrl
+ *
+ * strength also control Auto or Manual Edge Control Mode
+ * see also OV772X_MANUAL_EDGE_CTRL
+ */
+struct ov772x_edge_ctrl {
+	unsigned char strength;
+	unsigned char threshold;
+	unsigned char upper;
+	unsigned char lower;
+};
+
+#define OV772X_MANUAL_EDGE_CTRL		0x80 /* un-used bit of strength */
+#define OV772X_EDGE_STRENGTH_MASK	0x1F
+#define OV772X_EDGE_THRESHOLD_MASK	0x0F
+#define OV772X_EDGE_UPPER_MASK		0xFF
+#define OV772X_EDGE_LOWER_MASK		0xFF
+
+#define OV772X_AUTO_EDGECTRL(u, l)	\
+{					\
+	.upper = (u & OV772X_EDGE_UPPER_MASK),	\
+	.lower = (l & OV772X_EDGE_LOWER_MASK),	\
+}
+
+#define OV772X_MANUAL_EDGECTRL(s, t)			\
+{							\
+	.strength  = (s & OV772X_EDGE_STRENGTH_MASK) |	\
+			OV772X_MANUAL_EDGE_CTRL,	\
+	.threshold = (t & OV772X_EDGE_THRESHOLD_MASK),	\
+}
+
+/*
+ * ov772x camera info
+ */
+struct ov772x_camera_info {
+	unsigned long		flags;
+	struct ov772x_edge_ctrl	edgectrl;
+};
+
+#endif /* __OV772X_H__ */
diff --git a/include/media/radio-si4713.h b/include/media/radio-si4713.h
new file mode 100644
index 00000000..f6aae29c
--- /dev/null
+++ b/include/media/radio-si4713.h
@@ -0,0 +1,30 @@
+/*
+ * include/media/radio-si4713.h
+ *
+ * Board related data definitions for Si4713 radio transmitter chip.
+ *
+ * Copyright (c) 2009 Nokia Corporation
+ * Contact: Eduardo Valentin <eduardo.valentin@nokia.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+#ifndef RADIO_SI4713_H
+#define RADIO_SI4713_H
+
+#include <linux/i2c.h>
+
+#define SI4713_NAME "radio-si4713"
+
+/*
+ * Platform dependent definition
+ */
+struct radio_si4713_platform_data {
+	int i2c_bus;
+	struct i2c_board_info *subdev_board_info;
+};
+
+#endif /* ifndef RADIO_SI4713_H*/
diff --git a/include/media/rc-core.h b/include/media/rc-core.h
new file mode 100644
index 00000000..b0c494a6
--- /dev/null
+++ b/include/media/rc-core.h
@@ -0,0 +1,229 @@
+/*
+ * Remote Controller core header
+ *
+ * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#ifndef _RC_CORE
+#define _RC_CORE
+
+#include <linux/spinlock.h>
+#include <linux/kfifo.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#include <media/rc-map.h>
+
+extern int rc_core_debug;
+#define IR_dprintk(level, fmt, ...)				\
+do {								\
+	if (rc_core_debug >= level)				\
+		pr_debug("%s: " fmt, __func__, ##__VA_ARGS__);	\
+} while (0)
+
+enum rc_driver_type {
+	RC_DRIVER_SCANCODE = 0,	/* Driver or hardware generates a scancode */
+	RC_DRIVER_IR_RAW,	/* Needs a Infra-Red pulse/space decoder */
+};
+
+/**
+ * struct rc_dev - represents a remote control device
+ * @dev: driver model's view of this device
+ * @input_name: name of the input child device
+ * @input_phys: physical path to the input child device
+ * @input_id: id of the input child device (struct input_id)
+ * @driver_name: name of the hardware driver which registered this device
+ * @map_name: name of the default keymap
+ * @rc_map: current scan/key table
+ * @lock: used to ensure we've filled in all protocol details before
+ *	anyone can call show_protocols or store_protocols
+ * @devno: unique remote control device number
+ * @raw: additional data for raw pulse/space devices
+ * @input_dev: the input child device used to communicate events to userspace
+ * @driver_type: specifies if protocol decoding is done in hardware or software
+ * @idle: used to keep track of RX state
+ * @allowed_protos: bitmask with the supported RC_TYPE_* protocols
+ * @scanmask: some hardware decoders are not capable of providing the full
+ *	scancode to the application. As this is a hardware limit, we can't do
+ *	anything with it. Yet, as the same keycode table can be used with other
+ *	devices, a mask is provided to allow its usage. Drivers should generally
+ *	leave this field in blank
+ * @priv: driver-specific data
+ * @keylock: protects the remaining members of the struct
+ * @keypressed: whether a key is currently pressed
+ * @keyup_jiffies: time (in jiffies) when the current keypress should be released
+ * @timer_keyup: timer for releasing a keypress
+ * @last_keycode: keycode of last keypress
+ * @last_scancode: scancode of last keypress
+ * @last_toggle: toggle value of last command
+ * @timeout: optional time after which device stops sending data
+ * @min_timeout: minimum timeout supported by device
+ * @max_timeout: maximum timeout supported by device
+ * @rx_resolution : resolution (in ns) of input sampler
+ * @tx_resolution: resolution (in ns) of output sampler
+ * @change_protocol: allow changing the protocol used on hardware decoders
+ * @open: callback to allow drivers to enable polling/irq when IR input device
+ *	is opened.
+ * @close: callback to allow drivers to disable polling/irq when IR input device
+ *	is opened.
+ * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs)
+ * @s_tx_carrier: set transmit carrier frequency
+ * @s_tx_duty_cycle: set transmit duty cycle (0% - 100%)
+ * @s_rx_carrier: inform driver about carrier it is expected to handle
+ * @tx_ir: transmit IR
+ * @s_idle: enable/disable hardware idle mode, upon which,
+ *	device doesn't interrupt host until it sees IR pulses
+ * @s_learning_mode: enable wide band receiver used for learning
+ * @s_carrier_report: enable carrier reports
+ */
+struct rc_dev {
+	struct device			dev;
+	const char			*input_name;
+	const char			*input_phys;
+	struct input_id			input_id;
+	char				*driver_name;
+	const char			*map_name;
+	struct rc_map			rc_map;
+	struct mutex			lock;
+	unsigned long			devno;
+	struct ir_raw_event_ctrl	*raw;
+	struct input_dev		*input_dev;
+	enum rc_driver_type		driver_type;
+	bool				idle;
+	u64				allowed_protos;
+	u32				scanmask;
+	void				*priv;
+	spinlock_t			keylock;
+	bool				keypressed;
+	unsigned long			keyup_jiffies;
+	struct timer_list		timer_keyup;
+	u32				last_keycode;
+	u32				last_scancode;
+	u8				last_toggle;
+	u32				timeout;
+	u32				min_timeout;
+	u32				max_timeout;
+	u32				rx_resolution;
+	u32				tx_resolution;
+	int				(*change_protocol)(struct rc_dev *dev, u64 rc_type);
+	int				(*open)(struct rc_dev *dev);
+	void				(*close)(struct rc_dev *dev);
+	int				(*s_tx_mask)(struct rc_dev *dev, u32 mask);
+	int				(*s_tx_carrier)(struct rc_dev *dev, u32 carrier);
+	int				(*s_tx_duty_cycle)(struct rc_dev *dev, u32 duty_cycle);
+	int				(*s_rx_carrier_range)(struct rc_dev *dev, u32 min, u32 max);
+	int				(*tx_ir)(struct rc_dev *dev, unsigned *txbuf, unsigned n);
+	void				(*s_idle)(struct rc_dev *dev, bool enable);
+	int				(*s_learning_mode)(struct rc_dev *dev, int enable);
+	int				(*s_carrier_report) (struct rc_dev *dev, int enable);
+};
+
+#define to_rc_dev(d) container_of(d, struct rc_dev, dev)
+
+/*
+ * From rc-main.c
+ * Those functions can be used on any type of Remote Controller. They
+ * basically creates an input_dev and properly reports the device as a
+ * Remote Controller, at sys/class/rc.
+ */
+
+struct rc_dev *rc_allocate_device(void);
+void rc_free_device(struct rc_dev *dev);
+int rc_register_device(struct rc_dev *dev);
+void rc_unregister_device(struct rc_dev *dev);
+
+void rc_repeat(struct rc_dev *dev);
+void rc_keydown(struct rc_dev *dev, int scancode, u8 toggle);
+void rc_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle);
+void rc_keyup(struct rc_dev *dev);
+u32 rc_g_keycode_from_table(struct rc_dev *dev, u32 scancode);
+
+/*
+ * From rc-raw.c
+ * The Raw interface is specific to InfraRed. It may be a good idea to
+ * split it later into a separate header.
+ */
+
+enum raw_event_type {
+	IR_SPACE        = (1 << 0),
+	IR_PULSE        = (1 << 1),
+	IR_START_EVENT  = (1 << 2),
+	IR_STOP_EVENT   = (1 << 3),
+};
+
+struct ir_raw_event {
+	union {
+		u32             duration;
+
+		struct {
+			u32     carrier;
+			u8      duty_cycle;
+		};
+	};
+
+	unsigned                pulse:1;
+	unsigned                reset:1;
+	unsigned                timeout:1;
+	unsigned                carrier_report:1;
+};
+
+#define DEFINE_IR_RAW_EVENT(event) \
+	struct ir_raw_event event = { \
+		{ .duration = 0 } , \
+		.pulse = 0, \
+		.reset = 0, \
+		.timeout = 0, \
+		.carrier_report = 0 }
+
+static inline void init_ir_raw_event(struct ir_raw_event *ev)
+{
+	memset(ev, 0, sizeof(*ev));
+}
+
+#define IR_MAX_DURATION         0xFFFFFFFF      /* a bit more than 4 seconds */
+#define US_TO_NS(usec)		((usec) * 1000)
+#define MS_TO_US(msec)		((msec) * 1000)
+#define MS_TO_NS(msec)		((msec) * 1000 * 1000)
+
+void ir_raw_event_handle(struct rc_dev *dev);
+int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev);
+int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type);
+int ir_raw_event_store_with_filter(struct rc_dev *dev,
+				struct ir_raw_event *ev);
+void ir_raw_event_set_idle(struct rc_dev *dev, bool idle);
+
+static inline void ir_raw_event_reset(struct rc_dev *dev)
+{
+	DEFINE_IR_RAW_EVENT(ev);
+	ev.reset = true;
+
+	ir_raw_event_store(dev, &ev);
+	ir_raw_event_handle(dev);
+}
+
+/* extract mask bits out of data and pack them into the result */
+static inline u32 ir_extract_bits(u32 data, u32 mask)
+{
+	u32 vbit = 1, value = 0;
+
+	do {
+		if (mask & 1) {
+			if (data & 1)
+				value |= vbit;
+			vbit <<= 1;
+		}
+		data >>= 1;
+	} while (mask >>= 1);
+
+	return value;
+}
+
+#endif /* _RC_CORE */
diff --git a/include/media/rc-map.h b/include/media/rc-map.h
new file mode 100644
index 00000000..8db6741c
--- /dev/null
+++ b/include/media/rc-map.h
@@ -0,0 +1,162 @@
+/*
+ * rc-map.h - define RC map names used by RC drivers
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/input.h>
+
+#define RC_TYPE_UNKNOWN	0
+#define RC_TYPE_RC5	(1  << 0)	/* Philips RC5 protocol */
+#define RC_TYPE_NEC	(1  << 1)
+#define RC_TYPE_RC6	(1  << 2)	/* Philips RC6 protocol */
+#define RC_TYPE_JVC	(1  << 3)	/* JVC protocol */
+#define RC_TYPE_SONY	(1  << 4)	/* Sony12/15/20 protocol */
+#define RC_TYPE_RC5_SZ	(1  << 5)	/* RC5 variant used by Streamzap */
+#define RC_TYPE_SANYO   (1  << 6)	/* Sanyo protocol */
+#define RC_TYPE_MCE_KBD	(1  << 29)	/* RC6-ish MCE keyboard/mouse */
+#define RC_TYPE_LIRC	(1  << 30)	/* Pass raw IR to lirc userspace */
+#define RC_TYPE_OTHER	(1u << 31)
+
+#define RC_TYPE_ALL (RC_TYPE_RC5    | RC_TYPE_NEC   | RC_TYPE_RC6     | \
+		     RC_TYPE_JVC    | RC_TYPE_SONY  | RC_TYPE_LIRC    | \
+		     RC_TYPE_RC5_SZ | RC_TYPE_SANYO | RC_TYPE_MCE_KBD | \
+		     RC_TYPE_OTHER)
+
+struct rc_map_table {
+	u32	scancode;
+	u32	keycode;
+};
+
+struct rc_map {
+	struct rc_map_table	*scan;
+	unsigned int		size;	/* Max number of entries */
+	unsigned int		len;	/* Used number of entries */
+	unsigned int		alloc;	/* Size of *scan in bytes */
+	u64			rc_type;
+	const char		*name;
+	spinlock_t		lock;
+};
+
+struct rc_map_list {
+	struct list_head	 list;
+	struct rc_map map;
+};
+
+/* Routines from rc-map.c */
+
+int rc_map_register(struct rc_map_list *map);
+void rc_map_unregister(struct rc_map_list *map);
+struct rc_map *rc_map_get(const char *name);
+void rc_map_init(void);
+
+/* Names of the several keytables defined in-kernel */
+
+#define RC_MAP_ADSTECH_DVB_T_PCI         "rc-adstech-dvb-t-pci"
+#define RC_MAP_ALINK_DTU_M               "rc-alink-dtu-m"
+#define RC_MAP_ANYSEE                    "rc-anysee"
+#define RC_MAP_APAC_VIEWCOMP             "rc-apac-viewcomp"
+#define RC_MAP_ASUS_PC39                 "rc-asus-pc39"
+#define RC_MAP_ATI_TV_WONDER_HD_600      "rc-ati-tv-wonder-hd-600"
+#define RC_MAP_ATI_X10                   "rc-ati-x10"
+#define RC_MAP_AVERMEDIA_A16D            "rc-avermedia-a16d"
+#define RC_MAP_AVERMEDIA_CARDBUS         "rc-avermedia-cardbus"
+#define RC_MAP_AVERMEDIA_DVBT            "rc-avermedia-dvbt"
+#define RC_MAP_AVERMEDIA_M135A           "rc-avermedia-m135a"
+#define RC_MAP_AVERMEDIA_M733A_RM_K6     "rc-avermedia-m733a-rm-k6"
+#define RC_MAP_AVERMEDIA_RM_KS           "rc-avermedia-rm-ks"
+#define RC_MAP_AVERMEDIA                 "rc-avermedia"
+#define RC_MAP_AVERTV_303                "rc-avertv-303"
+#define RC_MAP_AZUREWAVE_AD_TU700        "rc-azurewave-ad-tu700"
+#define RC_MAP_BEHOLD_COLUMBUS           "rc-behold-columbus"
+#define RC_MAP_BEHOLD                    "rc-behold"
+#define RC_MAP_BUDGET_CI_OLD             "rc-budget-ci-old"
+#define RC_MAP_CINERGY_1400              "rc-cinergy-1400"
+#define RC_MAP_CINERGY                   "rc-cinergy"
+#define RC_MAP_DIB0700_NEC_TABLE         "rc-dib0700-nec"
+#define RC_MAP_DIB0700_RC5_TABLE         "rc-dib0700-rc5"
+#define RC_MAP_DIGITALNOW_TINYTWIN       "rc-digitalnow-tinytwin"
+#define RC_MAP_DIGITTRADE                "rc-digittrade"
+#define RC_MAP_DM1105_NEC                "rc-dm1105-nec"
+#define RC_MAP_DNTV_LIVE_DVBT_PRO        "rc-dntv-live-dvbt-pro"
+#define RC_MAP_DNTV_LIVE_DVB_T           "rc-dntv-live-dvb-t"
+#define RC_MAP_EMPTY                     "rc-empty"
+#define RC_MAP_EM_TERRATEC               "rc-em-terratec"
+#define RC_MAP_ENCORE_ENLTV2             "rc-encore-enltv2"
+#define RC_MAP_ENCORE_ENLTV_FM53         "rc-encore-enltv-fm53"
+#define RC_MAP_ENCORE_ENLTV              "rc-encore-enltv"
+#define RC_MAP_EVGA_INDTUBE              "rc-evga-indtube"
+#define RC_MAP_EZTV                      "rc-eztv"
+#define RC_MAP_FLYDVB                    "rc-flydvb"
+#define RC_MAP_FLYVIDEO                  "rc-flyvideo"
+#define RC_MAP_FUSIONHDTV_MCE            "rc-fusionhdtv-mce"
+#define RC_MAP_GADMEI_RM008Z             "rc-gadmei-rm008z"
+#define RC_MAP_GENIUS_TVGO_A11MCE        "rc-genius-tvgo-a11mce"
+#define RC_MAP_GOTVIEW7135               "rc-gotview7135"
+#define RC_MAP_HAUPPAUGE_NEW             "rc-hauppauge"
+#define RC_MAP_IMON_MCE                  "rc-imon-mce"
+#define RC_MAP_IMON_PAD                  "rc-imon-pad"
+#define RC_MAP_IODATA_BCTV7E             "rc-iodata-bctv7e"
+#define RC_MAP_IT913X_V1                 "rc-it913x-v1"
+#define RC_MAP_IT913X_V2                 "rc-it913x-v2"
+#define RC_MAP_KAIOMY                    "rc-kaiomy"
+#define RC_MAP_KWORLD_315U               "rc-kworld-315u"
+#define RC_MAP_KWORLD_PC150U             "rc-kworld-pc150u"
+#define RC_MAP_KWORLD_PLUS_TV_ANALOG     "rc-kworld-plus-tv-analog"
+#define RC_MAP_LEADTEK_Y04G0051          "rc-leadtek-y04g0051"
+#define RC_MAP_LIRC                      "rc-lirc"
+#define RC_MAP_LME2510                   "rc-lme2510"
+#define RC_MAP_MANLI                     "rc-manli"
+#define RC_MAP_MEDION_X10                "rc-medion-x10"
+#define RC_MAP_MSI_DIGIVOX_II            "rc-msi-digivox-ii"
+#define RC_MAP_MSI_DIGIVOX_III           "rc-msi-digivox-iii"
+#define RC_MAP_MSI_TVANYWHERE_PLUS       "rc-msi-tvanywhere-plus"
+#define RC_MAP_MSI_TVANYWHERE            "rc-msi-tvanywhere"
+#define RC_MAP_NEBULA                    "rc-nebula"
+#define RC_MAP_NEC_TERRATEC_CINERGY_XS   "rc-nec-terratec-cinergy-xs"
+#define RC_MAP_NORWOOD                   "rc-norwood"
+#define RC_MAP_NPGTECH                   "rc-npgtech"
+#define RC_MAP_PCTV_SEDNA                "rc-pctv-sedna"
+#define RC_MAP_PINNACLE_COLOR            "rc-pinnacle-color"
+#define RC_MAP_PINNACLE_GREY             "rc-pinnacle-grey"
+#define RC_MAP_PINNACLE_PCTV_HD          "rc-pinnacle-pctv-hd"
+#define RC_MAP_PIXELVIEW_NEW             "rc-pixelview-new"
+#define RC_MAP_PIXELVIEW                 "rc-pixelview"
+#define RC_MAP_PIXELVIEW_002T		 "rc-pixelview-002t"
+#define RC_MAP_PIXELVIEW_MK12            "rc-pixelview-mk12"
+#define RC_MAP_POWERCOLOR_REAL_ANGEL     "rc-powercolor-real-angel"
+#define RC_MAP_PROTEUS_2309              "rc-proteus-2309"
+#define RC_MAP_PURPLETV                  "rc-purpletv"
+#define RC_MAP_PV951                     "rc-pv951"
+#define RC_MAP_HAUPPAUGE                 "rc-hauppauge"
+#define RC_MAP_RC5_TV                    "rc-rc5-tv"
+#define RC_MAP_RC6_MCE                   "rc-rc6-mce"
+#define RC_MAP_REAL_AUDIO_220_32_KEYS    "rc-real-audio-220-32-keys"
+#define RC_MAP_SNAPSTREAM_FIREFLY        "rc-snapstream-firefly"
+#define RC_MAP_STREAMZAP                 "rc-streamzap"
+#define RC_MAP_TBS_NEC                   "rc-tbs-nec"
+#define RC_MAP_TECHNISAT_USB2            "rc-technisat-usb2"
+#define RC_MAP_TERRATEC_CINERGY_XS       "rc-terratec-cinergy-xs"
+#define RC_MAP_TERRATEC_SLIM             "rc-terratec-slim"
+#define RC_MAP_TERRATEC_SLIM_2           "rc-terratec-slim-2"
+#define RC_MAP_TEVII_NEC                 "rc-tevii-nec"
+#define RC_MAP_TIVO                      "rc-tivo"
+#define RC_MAP_TOTAL_MEDIA_IN_HAND       "rc-total-media-in-hand"
+#define RC_MAP_TREKSTOR                  "rc-trekstor"
+#define RC_MAP_TT_1500                   "rc-tt-1500"
+#define RC_MAP_TWINHAN_VP1027_DVBS       "rc-twinhan1027"
+#define RC_MAP_VIDEOMATE_K100            "rc-videomate-k100"
+#define RC_MAP_VIDEOMATE_S350            "rc-videomate-s350"
+#define RC_MAP_VIDEOMATE_TV_PVR          "rc-videomate-tv-pvr"
+#define RC_MAP_WINFAST                   "rc-winfast"
+#define RC_MAP_WINFAST_USBII_DELUXE      "rc-winfast-usbii-deluxe"
+
+/*
+ * Please, do not just append newer Remote Controller names at the end.
+ * The names should be ordered in alphabetical order
+ */
diff --git a/include/media/rj54n1cb0c.h b/include/media/rj54n1cb0c.h
new file mode 100644
index 00000000..8ae3288a
--- /dev/null
+++ b/include/media/rj54n1cb0c.h
@@ -0,0 +1,19 @@
+/*
+ * RJ54N1CB0C Private data
+ *
+ * Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __RJ54N1CB0C_H__
+#define __RJ54N1CB0C_H__
+
+struct rj54n1_pdata {
+	unsigned int	mclk_freq;
+	bool		ioctl_high;
+};
+
+#endif
diff --git a/include/media/s5k6aa.h b/include/media/s5k6aa.h
new file mode 100644
index 00000000..ba34f705
--- /dev/null
+++ b/include/media/s5k6aa.h
@@ -0,0 +1,51 @@
+/*
+ * S5K6AAFX camera sensor driver header
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef S5K6AA_H
+#define S5K6AA_H
+
+#include <media/v4l2-mediabus.h>
+
+/**
+ * struct s5k6aa_gpio - data structure describing a GPIO
+ * @gpio:  GPIO number
+ * @level: indicates active state of the @gpio
+ */
+struct s5k6aa_gpio {
+	int gpio;
+	int level;
+};
+
+/**
+ * struct s5k6aa_platform_data - s5k6aa driver platform data
+ * @set_power:   an additional callback to the board code, called
+ *               after enabling the regulators and before switching
+ *               the sensor off
+ * @mclk_frequency: sensor's master clock frequency in Hz
+ * @gpio_reset:  GPIO driving RESET pin
+ * @gpio_stby:   GPIO driving STBY pin
+ * @nlanes:      maximum number of MIPI-CSI lanes used
+ * @horiz_flip:  default horizontal image flip value, non zero to enable
+ * @vert_flip:   default vertical image flip value, non zero to enable
+ */
+
+struct s5k6aa_platform_data {
+	int (*set_power)(int enable);
+	unsigned long mclk_frequency;
+	struct s5k6aa_gpio gpio_reset;
+	struct s5k6aa_gpio gpio_stby;
+	enum v4l2_mbus_type bus_type;
+	u8 nlanes;
+	u8 horiz_flip;
+	u8 vert_flip;
+};
+
+#endif /* S5K6AA_H */
diff --git a/include/media/s5p_fimc.h b/include/media/s5p_fimc.h
new file mode 100644
index 00000000..688fb3f1
--- /dev/null
+++ b/include/media/s5p_fimc.h
@@ -0,0 +1,67 @@
+/*
+ * Samsung S5P SoC camera interface driver header
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd
+ * Author: Sylwester Nawrocki, <s.nawrocki@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef S5P_FIMC_H_
+#define S5P_FIMC_H_
+
+enum cam_bus_type {
+	FIMC_ITU_601 = 1,
+	FIMC_ITU_656,
+	FIMC_MIPI_CSI2,
+	FIMC_LCD_WB, /* FIFO link from LCD mixer */
+};
+
+struct i2c_board_info;
+
+/**
+ * struct s5p_fimc_isp_info - image sensor information required for host
+ *			      interace configuration.
+ *
+ * @board_info: pointer to I2C subdevice's board info
+ * @clk_frequency: frequency of the clock the host interface provides to sensor
+ * @bus_type: determines bus type, MIPI, ITU-R BT.601 etc.
+ * @csi_data_align: MIPI-CSI interface data alignment in bits
+ * @i2c_bus_num: i2c control bus id the sensor is attached to
+ * @mux_id: FIMC camera interface multiplexer index (separate for MIPI and ITU)
+ * @clk_id: index of the SoC peripheral clock for sensors
+ * @flags: the parallel bus flags defining signals polarity (V4L2_MBUS_*)
+ */
+struct s5p_fimc_isp_info {
+	struct i2c_board_info *board_info;
+	unsigned long clk_frequency;
+	enum cam_bus_type bus_type;
+	u16 csi_data_align;
+	u16 i2c_bus_num;
+	u16 mux_id;
+	u16 flags;
+	u8 clk_id;
+};
+
+/**
+ * struct s5p_platform_fimc - camera host interface platform data
+ *
+ * @isp_info: properties of camera sensor required for host interface setup
+ * @num_clients: the number of attached image sensors
+ */
+struct s5p_platform_fimc {
+	struct s5p_fimc_isp_info *isp_info;
+	int num_clients;
+};
+
+/*
+ * v4l2_device notification id. This is only for internal use in the kernel.
+ * Sensor subdevs should issue S5P_FIMC_TX_END_NOTIFY notification in single
+ * frame capture mode when there is only one VSYNC pulse issued by the sensor
+ * at begining of the frame transmission.
+ */
+#define S5P_FIMC_TX_END_NOTIFY _IO('e', 0)
+
+#endif /* S5P_FIMC_H_ */
diff --git a/include/media/s5p_hdmi.h b/include/media/s5p_hdmi.h
new file mode 100644
index 00000000..361a751f
--- /dev/null
+++ b/include/media/s5p_hdmi.h
@@ -0,0 +1,35 @@
+/*
+ * Driver header for S5P HDMI chip.
+ *
+ * Copyright (c) 2011 Samsung Electronics, Co. Ltd
+ * Contact: Tomasz Stanislawski <t.stanislaws@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef S5P_HDMI_H
+#define S5P_HDMI_H
+
+struct i2c_board_info;
+
+/**
+ * @hdmiphy_bus: controller id for HDMIPHY bus
+ * @hdmiphy_info: template for HDMIPHY I2C device
+ * @mhl_bus: controller id for MHL control bus
+ * @mhl_info: template for MHL I2C device
+ *
+ * NULL pointer for *_info fields indicates that
+ * the corresponding chip is not present
+ */
+struct s5p_hdmi_platform_data {
+	int hdmiphy_bus;
+	struct i2c_board_info *hdmiphy_info;
+	int mhl_bus;
+	struct i2c_board_info *mhl_info;
+};
+
+#endif /* S5P_HDMI_H */
+
diff --git a/include/media/saa6588.h b/include/media/saa6588.h
new file mode 100644
index 00000000..2c3c4420
--- /dev/null
+++ b/include/media/saa6588.h
@@ -0,0 +1,42 @@
+/*
+
+    Types and defines needed for RDS. This is included by
+    saa6588.c and every driver (e.g. bttv-driver.c) that wants
+    to use the saa6588 module.
+
+    (c) 2005 by Hans J. Koch
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+#ifndef _SAA6588_H
+#define _SAA6588_H
+
+struct saa6588_command {
+	unsigned int  block_count;
+	int           result;
+	unsigned char __user *buffer;
+	struct file   *instance;
+	poll_table    *event_list;
+};
+
+/* These ioctls are internal to the kernel */
+#define SAA6588_CMD_OPEN	_IOW('R', 1, int)
+#define SAA6588_CMD_CLOSE	_IOW('R', 2, int)
+#define SAA6588_CMD_READ	_IOR('R', 3, int)
+#define SAA6588_CMD_POLL	_IOR('R', 4, int)
+
+#endif
diff --git a/include/media/saa6752hs.h b/include/media/saa6752hs.h
new file mode 100644
index 00000000..3b8686ea
--- /dev/null
+++ b/include/media/saa6752hs.h
@@ -0,0 +1,26 @@
+/*
+    saa6752hs.h - definition for saa6752hs MPEG encoder
+
+    Copyright (C) 2003 Andrew de Quincey <adq@lidskialf.net>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/include/media/saa7115.h b/include/media/saa7115.h
new file mode 100644
index 00000000..bab21271
--- /dev/null
+++ b/include/media/saa7115.h
@@ -0,0 +1,56 @@
+/*
+    saa7115.h - definition for saa7111/3/4/5 inputs and frequency flags
+
+    Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl)
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _SAA7115_H_
+#define _SAA7115_H_
+
+/* SAA7111/3/4/5 HW inputs */
+#define SAA7115_COMPOSITE0 0
+#define SAA7115_COMPOSITE1 1
+#define SAA7115_COMPOSITE2 2
+#define SAA7115_COMPOSITE3 3
+#define SAA7115_COMPOSITE4 4 /* not available for the saa7111/3 */
+#define SAA7115_COMPOSITE5 5 /* not available for the saa7111/3 */
+#define SAA7115_SVIDEO0    6
+#define SAA7115_SVIDEO1    7
+#define SAA7115_SVIDEO2    8
+#define SAA7115_SVIDEO3    9
+
+/* SAA7115 v4l2_crystal_freq frequency values */
+#define SAA7115_FREQ_32_11_MHZ  32110000   /* 32.11 MHz crystal, SAA7114/5 only */
+#define SAA7115_FREQ_24_576_MHZ 24576000   /* 24.576 MHz crystal */
+
+/* SAA7115 v4l2_crystal_freq audio clock control flags */
+#define SAA7115_FREQ_FL_UCGC   (1 << 0)	   /* SA 3A[7], UCGC, SAA7115 only */
+#define SAA7115_FREQ_FL_CGCDIV (1 << 1)	   /* SA 3A[6], CGCDIV, SAA7115 only */
+#define SAA7115_FREQ_FL_APLL   (1 << 2)	   /* SA 3A[3], APLL, SAA7114/5 only */
+
+#define SAA7115_IPORT_ON    	1
+#define SAA7115_IPORT_OFF   	0
+
+/* SAA7111 specific output flags */
+#define SAA7111_VBI_BYPASS 	2
+#define SAA7111_FMT_YUV422      0x00
+#define SAA7111_FMT_RGB 	0x40
+#define SAA7111_FMT_CCIR 	0x80
+#define SAA7111_FMT_YUV411 	0xc0
+
+#endif
+
diff --git a/include/media/saa7127.h b/include/media/saa7127.h
new file mode 100644
index 00000000..bbcf8621
--- /dev/null
+++ b/include/media/saa7127.h
@@ -0,0 +1,41 @@
+/*
+    saa7127.h - definition for saa7126/7/8/9 inputs/outputs
+
+    Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl)
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _SAA7127_H_
+#define _SAA7127_H_
+
+/* Enumeration for the supported input types */
+enum saa7127_input_type {
+	SAA7127_INPUT_TYPE_NORMAL,
+	SAA7127_INPUT_TYPE_TEST_IMAGE
+};
+
+/* Enumeration for the supported output signal types */
+enum saa7127_output_type {
+	SAA7127_OUTPUT_TYPE_BOTH,
+	SAA7127_OUTPUT_TYPE_COMPOSITE,
+	SAA7127_OUTPUT_TYPE_SVIDEO,
+	SAA7127_OUTPUT_TYPE_RGB,
+	SAA7127_OUTPUT_TYPE_YUV_C,
+	SAA7127_OUTPUT_TYPE_YUV_V
+};
+
+#endif
+
diff --git a/include/media/saa7146.h b/include/media/saa7146.h
new file mode 100644
index 00000000..0f037e8e
--- /dev/null
+++ b/include/media/saa7146.h
@@ -0,0 +1,475 @@
+#ifndef __SAA7146__
+#define __SAA7146__
+
+#include <linux/delay.h>	/* for delay-stuff */
+#include <linux/slab.h>		/* for kmalloc/kfree */
+#include <linux/pci.h>		/* for pci-config-stuff, vendor ids etc. */
+#include <linux/init.h>		/* for "__init" */
+#include <linux/interrupt.h>	/* for IMMEDIATE_BH */
+#include <linux/kmod.h>		/* for kernel module loader */
+#include <linux/i2c.h>		/* for i2c subsystem */
+#include <asm/io.h>		/* for accessing devices */
+#include <linux/stringify.h>
+#include <linux/mutex.h>
+#include <linux/scatterlist.h>
+#include <media/v4l2-device.h>
+
+#include <linux/vmalloc.h>	/* for vmalloc() */
+#include <linux/mm.h>		/* for vmalloc_to_page() */
+
+#define SAA7146_VERSION_CODE 0x000600	/* 0.6.0 */
+
+#define saa7146_write(sxy,adr,dat)    writel((dat),(sxy->mem+(adr)))
+#define saa7146_read(sxy,adr)         readl(sxy->mem+(adr))
+
+extern unsigned int saa7146_debug;
+
+#ifndef DEBUG_VARIABLE
+	#define DEBUG_VARIABLE saa7146_debug
+#endif
+
+#define ERR(fmt, ...)	pr_err("%s: " fmt, __func__, ##__VA_ARGS__)
+
+#define _DBG(mask, fmt, ...)						\
+do {									\
+	if (DEBUG_VARIABLE & mask)					\
+		pr_debug("%s(): " fmt, __func__, ##__VA_ARGS__);	\
+} while (0)
+
+/* simple debug messages */
+#define DEB_S(fmt, ...)		_DBG(0x01, fmt, ##__VA_ARGS__)
+/* more detailed debug messages */
+#define DEB_D(fmt, ...)		_DBG(0x02, fmt, ##__VA_ARGS__)
+/* print enter and exit of functions */
+#define DEB_EE(fmt, ...)	_DBG(0x04, fmt, ##__VA_ARGS__)
+/* i2c debug messages */
+#define DEB_I2C(fmt, ...)	_DBG(0x08, fmt, ##__VA_ARGS__)
+/* vbi debug messages */
+#define DEB_VBI(fmt, ...)	_DBG(0x10, fmt, ##__VA_ARGS__)
+/* interrupt debug messages */
+#define DEB_INT(fmt, ...)	_DBG(0x20, fmt, ##__VA_ARGS__)
+/* capture debug messages */
+#define DEB_CAP(fmt, ...)	_DBG(0x40, fmt, ##__VA_ARGS__)
+
+#define SAA7146_ISR_CLEAR(x,y) \
+	saa7146_write(x, ISR, (y));
+
+struct module;
+
+struct saa7146_dev;
+struct saa7146_extension;
+struct saa7146_vv;
+
+/* saa7146 page table */
+struct saa7146_pgtable {
+	unsigned int	size;
+	__le32		*cpu;
+	dma_addr_t	dma;
+	/* used for offsets for u,v planes for planar capture modes */
+	unsigned long	offset;
+	/* used for custom pagetables (used for example by budget dvb cards) */
+	struct scatterlist *slist;
+	int		nents;
+};
+
+struct saa7146_pci_extension_data {
+	struct saa7146_extension *ext;
+	void *ext_priv;			/* most likely a name string */
+};
+
+#define MAKE_EXTENSION_PCI(x_var, x_vendor, x_device)		\
+	{							\
+		.vendor    = PCI_VENDOR_ID_PHILIPS,		\
+		.device	   = PCI_DEVICE_ID_PHILIPS_SAA7146,	\
+		.subvendor = x_vendor,				\
+		.subdevice = x_device,				\
+		.driver_data = (unsigned long)& x_var,		\
+	}
+
+struct saa7146_extension
+{
+	char	name[32];		/* name of the device */
+#define SAA7146_USE_I2C_IRQ	0x1
+#define SAA7146_I2C_SHORT_DELAY	0x2
+	int	flags;
+
+	/* pairs of subvendor and subdevice ids for
+	   supported devices, last entry 0xffff, 0xfff */
+	struct module *module;
+	struct pci_driver driver;
+	struct pci_device_id *pci_tbl;
+
+	/* extension functions */
+	int (*probe)(struct saa7146_dev *);
+	int (*attach)(struct saa7146_dev *, struct saa7146_pci_extension_data *);
+	int (*detach)(struct saa7146_dev*);
+
+	u32	irq_mask;	/* mask to indicate, which irq-events are handled by the extension */
+	void	(*irq_func)(struct saa7146_dev*, u32* irq_mask);
+};
+
+struct saa7146_dma
+{
+	dma_addr_t	dma_handle;
+	__le32		*cpu_addr;
+};
+
+struct saa7146_dev
+{
+	struct module			*module;
+
+	struct list_head		item;
+
+	struct v4l2_device 		v4l2_dev;
+
+	/* different device locks */
+	spinlock_t			slock;
+	struct mutex			v4l2_lock;
+
+	unsigned char			__iomem *mem;		/* pointer to mapped IO memory */
+	u32				revision;	/* chip revision; needed for bug-workarounds*/
+
+	/* pci-device & irq stuff*/
+	char				name[32];
+	struct pci_dev			*pci;
+	u32				int_todo;
+	spinlock_t			int_slock;
+
+	/* extension handling */
+	struct saa7146_extension	*ext;		/* indicates if handled by extension */
+	void				*ext_priv;	/* pointer for extension private use (most likely some private data) */
+	struct saa7146_ext_vv		*ext_vv_data;
+
+	/* per device video/vbi informations (if available) */
+	struct saa7146_vv	*vv_data;
+	void (*vv_callback)(struct saa7146_dev *dev, unsigned long status);
+
+	/* i2c-stuff */
+	struct mutex			i2c_lock;
+
+	u32				i2c_bitrate;
+	struct saa7146_dma		d_i2c;	/* pointer to i2c memory */
+	wait_queue_head_t		i2c_wq;
+	int				i2c_op;
+
+	/* memories */
+	struct saa7146_dma		d_rps0;
+	struct saa7146_dma		d_rps1;
+};
+
+static inline struct saa7146_dev *to_saa7146_dev(struct v4l2_device *v4l2_dev)
+{
+	return container_of(v4l2_dev, struct saa7146_dev, v4l2_dev);
+}
+
+/* from saa7146_i2c.c */
+int saa7146_i2c_adapter_prepare(struct saa7146_dev *dev, struct i2c_adapter *i2c_adapter, u32 bitrate);
+
+/* from saa7146_core.c */
+extern struct list_head saa7146_devices;
+extern struct mutex saa7146_devices_lock;
+int saa7146_register_extension(struct saa7146_extension*);
+int saa7146_unregister_extension(struct saa7146_extension*);
+struct saa7146_format* saa7146_format_by_fourcc(struct saa7146_dev *dev, int fourcc);
+int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt);
+void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt);
+int saa7146_pgtable_build_single(struct pci_dev *pci, struct saa7146_pgtable *pt, struct scatterlist *list, int length );
+void *saa7146_vmalloc_build_pgtable(struct pci_dev *pci, long length, struct saa7146_pgtable *pt);
+void saa7146_vfree_destroy_pgtable(struct pci_dev *pci, void *mem, struct saa7146_pgtable *pt);
+void saa7146_setgpio(struct saa7146_dev *dev, int port, u32 data);
+int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop);
+
+/* some memory sizes */
+#define SAA7146_I2C_MEM		( 1*PAGE_SIZE)
+#define SAA7146_RPS_MEM		( 1*PAGE_SIZE)
+
+/* some i2c constants */
+#define SAA7146_I2C_TIMEOUT	100	/* i2c-timeout-value in ms */
+#define SAA7146_I2C_RETRIES	3	/* how many times shall we retry an i2c-operation? */
+#define SAA7146_I2C_DELAY	5	/* time we wait after certain i2c-operations */
+
+/* unsorted defines */
+#define ME1    0x0000000800
+#define PV1    0x0000000008
+
+/* gpio defines */
+#define SAA7146_GPIO_INPUT 0x00
+#define SAA7146_GPIO_IRQHI 0x10
+#define SAA7146_GPIO_IRQLO 0x20
+#define SAA7146_GPIO_IRQHL 0x30
+#define SAA7146_GPIO_OUTLO 0x40
+#define SAA7146_GPIO_OUTHI 0x50
+
+/* debi defines */
+#define DEBINOSWAP 0x000e0000
+
+/* define for the register programming sequencer (rps) */
+#define CMD_NOP		0x00000000  /* No operation */
+#define CMD_CLR_EVENT	0x00000000  /* Clear event */
+#define CMD_SET_EVENT	0x10000000  /* Set signal event */
+#define CMD_PAUSE	0x20000000  /* Pause */
+#define CMD_CHECK_LATE	0x30000000  /* Check late */
+#define CMD_UPLOAD	0x40000000  /* Upload */
+#define CMD_STOP	0x50000000  /* Stop */
+#define CMD_INTERRUPT	0x60000000  /* Interrupt */
+#define CMD_JUMP	0x80000000  /* Jump */
+#define CMD_WR_REG	0x90000000  /* Write (load) register */
+#define CMD_RD_REG	0xa0000000  /* Read (store) register */
+#define CMD_WR_REG_MASK	0xc0000000  /* Write register with mask */
+
+#define CMD_OAN		MASK_27
+#define CMD_INV		MASK_26
+#define CMD_SIG4	MASK_25
+#define CMD_SIG3	MASK_24
+#define CMD_SIG2	MASK_23
+#define CMD_SIG1	MASK_22
+#define CMD_SIG0	MASK_21
+#define CMD_O_FID_B	MASK_14
+#define CMD_E_FID_B	MASK_13
+#define CMD_O_FID_A	MASK_12
+#define CMD_E_FID_A	MASK_11
+
+/* some events and command modifiers for rps1 squarewave generator */
+#define EVT_HS          (1<<15)     // Source Line Threshold reached
+#define EVT_VBI_B       (1<<9)      // VSYNC Event
+#define RPS_OAN         (1<<27)     // 1: OR events, 0: AND events
+#define RPS_INV         (1<<26)     // Invert (compound) event
+#define GPIO3_MSK       0xFF000000  // GPIO #3 control bits
+
+/* Bit mask constants */
+#define MASK_00   0x00000001    /* Mask value for bit 0 */
+#define MASK_01   0x00000002    /* Mask value for bit 1 */
+#define MASK_02   0x00000004    /* Mask value for bit 2 */
+#define MASK_03   0x00000008    /* Mask value for bit 3 */
+#define MASK_04   0x00000010    /* Mask value for bit 4 */
+#define MASK_05   0x00000020    /* Mask value for bit 5 */
+#define MASK_06   0x00000040    /* Mask value for bit 6 */
+#define MASK_07   0x00000080    /* Mask value for bit 7 */
+#define MASK_08   0x00000100    /* Mask value for bit 8 */
+#define MASK_09   0x00000200    /* Mask value for bit 9 */
+#define MASK_10   0x00000400    /* Mask value for bit 10 */
+#define MASK_11   0x00000800    /* Mask value for bit 11 */
+#define MASK_12   0x00001000    /* Mask value for bit 12 */
+#define MASK_13   0x00002000    /* Mask value for bit 13 */
+#define MASK_14   0x00004000    /* Mask value for bit 14 */
+#define MASK_15   0x00008000    /* Mask value for bit 15 */
+#define MASK_16   0x00010000    /* Mask value for bit 16 */
+#define MASK_17   0x00020000    /* Mask value for bit 17 */
+#define MASK_18   0x00040000    /* Mask value for bit 18 */
+#define MASK_19   0x00080000    /* Mask value for bit 19 */
+#define MASK_20   0x00100000    /* Mask value for bit 20 */
+#define MASK_21   0x00200000    /* Mask value for bit 21 */
+#define MASK_22   0x00400000    /* Mask value for bit 22 */
+#define MASK_23   0x00800000    /* Mask value for bit 23 */
+#define MASK_24   0x01000000    /* Mask value for bit 24 */
+#define MASK_25   0x02000000    /* Mask value for bit 25 */
+#define MASK_26   0x04000000    /* Mask value for bit 26 */
+#define MASK_27   0x08000000    /* Mask value for bit 27 */
+#define MASK_28   0x10000000    /* Mask value for bit 28 */
+#define MASK_29   0x20000000    /* Mask value for bit 29 */
+#define MASK_30   0x40000000    /* Mask value for bit 30 */
+#define MASK_31   0x80000000    /* Mask value for bit 31 */
+
+#define MASK_B0   0x000000ff    /* Mask value for byte 0 */
+#define MASK_B1   0x0000ff00    /* Mask value for byte 1 */
+#define MASK_B2   0x00ff0000    /* Mask value for byte 2 */
+#define MASK_B3   0xff000000    /* Mask value for byte 3 */
+
+#define MASK_W0   0x0000ffff    /* Mask value for word 0 */
+#define MASK_W1   0xffff0000    /* Mask value for word 1 */
+
+#define MASK_PA   0xfffffffc    /* Mask value for physical address */
+#define MASK_PR   0xfffffffe	/* Mask value for protection register */
+#define MASK_ER   0xffffffff    /* Mask value for the entire register */
+
+#define MASK_NONE 0x00000000    /* No mask */
+
+/* register aliases */
+#define BASE_ODD1         0x00  /* Video DMA 1 registers  */
+#define BASE_EVEN1        0x04
+#define PROT_ADDR1        0x08
+#define PITCH1            0x0C
+#define BASE_PAGE1        0x10  /* Video DMA 1 base page */
+#define NUM_LINE_BYTE1    0x14
+
+#define BASE_ODD2         0x18  /* Video DMA 2 registers */
+#define BASE_EVEN2        0x1C
+#define PROT_ADDR2        0x20
+#define PITCH2            0x24
+#define BASE_PAGE2        0x28  /* Video DMA 2 base page */
+#define NUM_LINE_BYTE2    0x2C
+
+#define BASE_ODD3         0x30  /* Video DMA 3 registers */
+#define BASE_EVEN3        0x34
+#define PROT_ADDR3        0x38
+#define PITCH3            0x3C
+#define BASE_PAGE3        0x40  /* Video DMA 3 base page */
+#define NUM_LINE_BYTE3    0x44
+
+#define PCI_BT_V1         0x48  /* Video/FIFO 1 */
+#define PCI_BT_V2         0x49  /* Video/FIFO 2 */
+#define PCI_BT_V3         0x4A  /* Video/FIFO 3 */
+#define PCI_BT_DEBI       0x4B  /* DEBI */
+#define PCI_BT_A          0x4C  /* Audio */
+
+#define DD1_INIT          0x50  /* Init setting of DD1 interface */
+
+#define DD1_STREAM_B      0x54  /* DD1 B video data stream handling */
+#define DD1_STREAM_A      0x56  /* DD1 A video data stream handling */
+
+#define BRS_CTRL          0x58  /* BRS control register */
+#define HPS_CTRL          0x5C  /* HPS control register */
+#define HPS_V_SCALE       0x60  /* HPS vertical scale */
+#define HPS_V_GAIN        0x64  /* HPS vertical ACL and gain */
+#define HPS_H_PRESCALE    0x68  /* HPS horizontal prescale   */
+#define HPS_H_SCALE       0x6C  /* HPS horizontal scale */
+#define BCS_CTRL          0x70  /* BCS control */
+#define CHROMA_KEY_RANGE  0x74
+#define CLIP_FORMAT_CTRL  0x78  /* HPS outputs formats & clipping */
+
+#define DEBI_CONFIG       0x7C
+#define DEBI_COMMAND      0x80
+#define DEBI_PAGE         0x84
+#define DEBI_AD           0x88
+
+#define I2C_TRANSFER      0x8C
+#define I2C_STATUS        0x90
+
+#define BASE_A1_IN        0x94	/* Audio 1 input DMA */
+#define PROT_A1_IN        0x98
+#define PAGE_A1_IN        0x9C
+
+#define BASE_A1_OUT       0xA0  /* Audio 1 output DMA */
+#define PROT_A1_OUT       0xA4
+#define PAGE_A1_OUT       0xA8
+
+#define BASE_A2_IN        0xAC  /* Audio 2 input DMA */
+#define PROT_A2_IN        0xB0
+#define PAGE_A2_IN        0xB4
+
+#define BASE_A2_OUT       0xB8  /* Audio 2 output DMA */
+#define PROT_A2_OUT       0xBC
+#define PAGE_A2_OUT       0xC0
+
+#define RPS_PAGE0         0xC4  /* RPS task 0 page register */
+#define RPS_PAGE1         0xC8  /* RPS task 1 page register */
+
+#define RPS_THRESH0       0xCC  /* HBI threshold for task 0 */
+#define RPS_THRESH1       0xD0  /* HBI threshold for task 1 */
+
+#define RPS_TOV0          0xD4  /* RPS timeout for task 0 */
+#define RPS_TOV1          0xD8  /* RPS timeout for task 1 */
+
+#define IER               0xDC  /* Interrupt enable register */
+
+#define GPIO_CTRL         0xE0  /* GPIO 0-3 register */
+
+#define EC1SSR            0xE4  /* Event cnt set 1 source select */
+#define EC2SSR            0xE8  /* Event cnt set 2 source select */
+#define ECT1R             0xEC  /* Event cnt set 1 thresholds */
+#define ECT2R             0xF0  /* Event cnt set 2 thresholds */
+
+#define ACON1             0xF4
+#define ACON2             0xF8
+
+#define MC1               0xFC   /* Main control register 1 */
+#define MC2               0x100  /* Main control register 2  */
+
+#define RPS_ADDR0         0x104  /* RPS task 0 address register */
+#define RPS_ADDR1         0x108  /* RPS task 1 address register */
+
+#define ISR               0x10C  /* Interrupt status register */
+#define PSR               0x110  /* Primary status register */
+#define SSR               0x114  /* Secondary status register */
+
+#define EC1R              0x118  /* Event counter set 1 register */
+#define EC2R              0x11C  /* Event counter set 2 register */
+
+#define PCI_VDP1          0x120  /* Video DMA pointer of FIFO 1 */
+#define PCI_VDP2          0x124  /* Video DMA pointer of FIFO 2 */
+#define PCI_VDP3          0x128  /* Video DMA pointer of FIFO 3 */
+#define PCI_ADP1          0x12C  /* Audio DMA pointer of audio out 1 */
+#define PCI_ADP2          0x130  /* Audio DMA pointer of audio in 1 */
+#define PCI_ADP3          0x134  /* Audio DMA pointer of audio out 2 */
+#define PCI_ADP4          0x138  /* Audio DMA pointer of audio in 2 */
+#define PCI_DMA_DDP       0x13C  /* DEBI DMA pointer */
+
+#define LEVEL_REP         0x140,
+#define A_TIME_SLOT1      0x180,  /* from 180 - 1BC */
+#define A_TIME_SLOT2      0x1C0,  /* from 1C0 - 1FC */
+
+/* isr masks */
+#define SPCI_PPEF       0x80000000  /* PCI parity error */
+#define SPCI_PABO       0x40000000  /* PCI access error (target or master abort) */
+#define SPCI_PPED       0x20000000  /* PCI parity error on 'real time data' */
+#define SPCI_RPS_I1     0x10000000  /* Interrupt issued by RPS1 */
+#define SPCI_RPS_I0     0x08000000  /* Interrupt issued by RPS0 */
+#define SPCI_RPS_LATE1  0x04000000  /* RPS task 1 is late */
+#define SPCI_RPS_LATE0  0x02000000  /* RPS task 0 is late */
+#define SPCI_RPS_E1     0x01000000  /* RPS error from task 1 */
+#define SPCI_RPS_E0     0x00800000  /* RPS error from task 0 */
+#define SPCI_RPS_TO1    0x00400000  /* RPS timeout task 1 */
+#define SPCI_RPS_TO0    0x00200000  /* RPS timeout task 0 */
+#define SPCI_UPLD       0x00100000  /* RPS in upload */
+#define SPCI_DEBI_S     0x00080000  /* DEBI status */
+#define SPCI_DEBI_E     0x00040000  /* DEBI error */
+#define SPCI_IIC_S      0x00020000  /* I2C status */
+#define SPCI_IIC_E      0x00010000  /* I2C error */
+#define SPCI_A2_IN      0x00008000  /* Audio 2 input DMA protection / limit */
+#define SPCI_A2_OUT     0x00004000  /* Audio 2 output DMA protection / limit */
+#define SPCI_A1_IN      0x00002000  /* Audio 1 input DMA protection / limit */
+#define SPCI_A1_OUT     0x00001000  /* Audio 1 output DMA protection / limit */
+#define SPCI_AFOU       0x00000800  /* Audio FIFO over- / underflow */
+#define SPCI_V_PE       0x00000400  /* Video protection address */
+#define SPCI_VFOU       0x00000200  /* Video FIFO over- / underflow */
+#define SPCI_FIDA       0x00000100  /* Field ID video port A */
+#define SPCI_FIDB       0x00000080  /* Field ID video port B */
+#define SPCI_PIN3       0x00000040  /* GPIO pin 3 */
+#define SPCI_PIN2       0x00000020  /* GPIO pin 2 */
+#define SPCI_PIN1       0x00000010  /* GPIO pin 1 */
+#define SPCI_PIN0       0x00000008  /* GPIO pin 0 */
+#define SPCI_ECS        0x00000004  /* Event counter 1, 2, 4, 5 */
+#define SPCI_EC3S       0x00000002  /* Event counter 3 */
+#define SPCI_EC0S       0x00000001  /* Event counter 0 */
+
+/* i2c */
+#define	SAA7146_I2C_ABORT	(1<<7)
+#define	SAA7146_I2C_SPERR	(1<<6)
+#define	SAA7146_I2C_APERR	(1<<5)
+#define	SAA7146_I2C_DTERR	(1<<4)
+#define	SAA7146_I2C_DRERR	(1<<3)
+#define	SAA7146_I2C_AL		(1<<2)
+#define	SAA7146_I2C_ERR		(1<<1)
+#define	SAA7146_I2C_BUSY	(1<<0)
+
+#define	SAA7146_I2C_START	(0x3)
+#define	SAA7146_I2C_CONT	(0x2)
+#define	SAA7146_I2C_STOP	(0x1)
+#define	SAA7146_I2C_NOP		(0x0)
+
+#define SAA7146_I2C_BUS_BIT_RATE_6400	(0x500)
+#define SAA7146_I2C_BUS_BIT_RATE_3200	(0x100)
+#define SAA7146_I2C_BUS_BIT_RATE_480	(0x400)
+#define SAA7146_I2C_BUS_BIT_RATE_320	(0x600)
+#define SAA7146_I2C_BUS_BIT_RATE_240	(0x700)
+#define SAA7146_I2C_BUS_BIT_RATE_120	(0x000)
+#define SAA7146_I2C_BUS_BIT_RATE_80	(0x200)
+#define SAA7146_I2C_BUS_BIT_RATE_60	(0x300)
+
+static inline void SAA7146_IER_DISABLE(struct saa7146_dev *x, unsigned y)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&x->int_slock, flags);
+	saa7146_write(x, IER, saa7146_read(x, IER) & ~y);
+	spin_unlock_irqrestore(&x->int_slock, flags);
+}
+
+static inline void SAA7146_IER_ENABLE(struct saa7146_dev *x, unsigned y)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&x->int_slock, flags);
+	saa7146_write(x, IER, saa7146_read(x, IER) | y);
+	spin_unlock_irqrestore(&x->int_slock, flags);
+}
+
+#endif
diff --git a/include/media/saa7146_vv.h b/include/media/saa7146_vv.h
new file mode 100644
index 00000000..4aeff96f
--- /dev/null
+++ b/include/media/saa7146_vv.h
@@ -0,0 +1,264 @@
+#ifndef __SAA7146_VV__
+#define __SAA7146_VV__
+
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/saa7146.h>
+#include <media/videobuf-dma-sg.h>
+
+#define MAX_SAA7146_CAPTURE_BUFFERS	32	/* arbitrary */
+#define BUFFER_TIMEOUT     (HZ/2)  /* 0.5 seconds */
+
+#define WRITE_RPS0(x) do { \
+	dev->d_rps0.cpu_addr[ count++ ] = cpu_to_le32(x); \
+	} while (0);
+
+#define WRITE_RPS1(x) do { \
+	dev->d_rps1.cpu_addr[ count++ ] = cpu_to_le32(x); \
+	} while (0);
+
+struct	saa7146_video_dma {
+	u32 base_odd;
+	u32 base_even;
+	u32 prot_addr;
+	u32 pitch;
+	u32 base_page;
+	u32 num_line_byte;
+};
+
+#define FORMAT_BYTE_SWAP	0x1
+#define FORMAT_IS_PLANAR	0x2
+
+struct saa7146_format {
+	char	*name;
+	u32	pixelformat;
+	u32	trans;
+	u8	depth;
+	u8	flags;
+	u8	swap;
+};
+
+struct saa7146_standard
+{
+	char          *name;
+	v4l2_std_id   id;
+
+	int v_offset;	/* number of lines of vertical offset before processing */
+	int v_field;	/* number of lines in a field for HPS to process */
+
+	int h_offset;	/* horizontal offset of processing window */
+	int h_pixels;	/* number of horizontal pixels to process */
+
+	int v_max_out;
+	int h_max_out;
+};
+
+/* buffer for one video/vbi frame */
+struct saa7146_buf {
+	/* common v4l buffer stuff -- must be first */
+	struct videobuf_buffer vb;
+
+	/* saa7146 specific */
+	struct v4l2_pix_format  *fmt;
+	int (*activate)(struct saa7146_dev *dev,
+			struct saa7146_buf *buf,
+			struct saa7146_buf *next);
+
+	/* page tables */
+	struct saa7146_pgtable  pt[3];
+};
+
+struct saa7146_dmaqueue {
+	struct saa7146_dev	*dev;
+	struct saa7146_buf	*curr;
+	struct list_head	queue;
+	struct timer_list	timeout;
+};
+
+struct saa7146_overlay {
+	struct saa7146_fh	*fh;
+	struct v4l2_window	win;
+	struct v4l2_clip	clips[16];
+	int			nclips;
+};
+
+/* per open data */
+struct saa7146_fh {
+	struct saa7146_dev	*dev;
+	/* if this is a vbi or capture open */
+	enum v4l2_buf_type	type;
+
+	/* video overlay */
+	struct saa7146_overlay	ov;
+
+	/* video capture */
+	struct videobuf_queue	video_q;
+	struct v4l2_pix_format	video_fmt;
+
+	/* vbi capture */
+	struct videobuf_queue	vbi_q;
+	struct v4l2_vbi_format	vbi_fmt;
+	struct timer_list	vbi_read_timeout;
+
+	unsigned int resources;	/* resource management for device open */
+};
+
+#define STATUS_OVERLAY	0x01
+#define STATUS_CAPTURE	0x02
+
+struct saa7146_vv
+{
+	/* vbi capture */
+	struct saa7146_dmaqueue		vbi_q;
+	/* vbi workaround interrupt queue */
+	wait_queue_head_t		vbi_wq;
+	int				vbi_fieldcount;
+	struct saa7146_fh		*vbi_streaming;
+
+	int				video_status;
+	struct saa7146_fh		*video_fh;
+
+	/* video overlay */
+	struct v4l2_framebuffer		ov_fb;
+	struct saa7146_format		*ov_fmt;
+	struct saa7146_overlay		*ov_data;
+	struct saa7146_fh		*ov_suspend;
+
+	/* video capture */
+	struct saa7146_dmaqueue		video_q;
+	enum v4l2_field			last_field;
+
+	/* common: fixme? shouldn't this be in saa7146_fh?
+	   (this leads to a more complicated question: shall the driver
+	   store the different settings (for example S_INPUT) for every open
+	   and restore it appropriately, or should all settings be common for
+	   all opens? currently, we do the latter, like all other
+	   drivers do... */
+	struct saa7146_standard	*standard;
+
+	int	vflip;
+	int	hflip;
+	int	current_hps_source;
+	int	current_hps_sync;
+
+	struct saa7146_dma	d_clipping;	/* pointer to clipping memory */
+
+	unsigned int resources;	/* resource management for device */
+};
+
+/* flags */
+#define SAA7146_USE_PORT_B_FOR_VBI	0x2     /* use input port b for vbi hardware bug workaround */
+
+struct saa7146_ext_vv
+{
+	/* informations about the video capabilities of the device */
+	int	inputs;
+	int	audios;
+	u32	capabilities;
+	int	flags;
+
+	/* additionally supported transmission standards */
+	struct saa7146_standard *stds;
+	int num_stds;
+	int (*std_callback)(struct saa7146_dev*, struct saa7146_standard *);
+
+	/* the extension can override this */
+	struct v4l2_ioctl_ops ops;
+	/* pointer to the saa7146 core ops */
+	const struct v4l2_ioctl_ops *core_ops;
+
+	struct v4l2_file_operations vbi_fops;
+};
+
+struct saa7146_use_ops  {
+	void (*init)(struct saa7146_dev *, struct saa7146_vv *);
+	int(*open)(struct saa7146_dev *, struct file *);
+	void (*release)(struct saa7146_dev *, struct file *);
+	void (*irq_done)(struct saa7146_dev *, unsigned long status);
+	ssize_t (*read)(struct file *, char __user *, size_t, loff_t *);
+};
+
+/* from saa7146_fops.c */
+int saa7146_register_device(struct video_device **vid, struct saa7146_dev* dev, char *name, int type);
+int saa7146_unregister_device(struct video_device **vid, struct saa7146_dev* dev);
+void saa7146_buffer_finish(struct saa7146_dev *dev, struct saa7146_dmaqueue *q, int state);
+void saa7146_buffer_next(struct saa7146_dev *dev, struct saa7146_dmaqueue *q,int vbi);
+int saa7146_buffer_queue(struct saa7146_dev *dev, struct saa7146_dmaqueue *q, struct saa7146_buf *buf);
+void saa7146_buffer_timeout(unsigned long data);
+void saa7146_dma_free(struct saa7146_dev* dev,struct videobuf_queue *q,
+						struct saa7146_buf *buf);
+
+int saa7146_vv_init(struct saa7146_dev* dev, struct saa7146_ext_vv *ext_vv);
+int saa7146_vv_release(struct saa7146_dev* dev);
+
+/* from saa7146_hlp.c */
+int saa7146_enable_overlay(struct saa7146_fh *fh);
+void saa7146_disable_overlay(struct saa7146_fh *fh);
+
+void saa7146_set_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next);
+void saa7146_write_out_dma(struct saa7146_dev* dev, int which, struct saa7146_video_dma* vdma) ;
+void saa7146_set_hps_source_and_sync(struct saa7146_dev *saa, int source, int sync);
+void saa7146_set_gpio(struct saa7146_dev *saa, u8 pin, u8 data);
+
+/* from saa7146_video.c */
+extern const struct v4l2_ioctl_ops saa7146_video_ioctl_ops;
+extern struct saa7146_use_ops saa7146_video_uops;
+int saa7146_start_preview(struct saa7146_fh *fh);
+int saa7146_stop_preview(struct saa7146_fh *fh);
+long saa7146_video_do_ioctl(struct file *file, unsigned int cmd, void *arg);
+
+/* from saa7146_vbi.c */
+extern struct saa7146_use_ops saa7146_vbi_uops;
+
+/* resource management functions */
+int saa7146_res_get(struct saa7146_fh *fh, unsigned int bit);
+void saa7146_res_free(struct saa7146_fh *fh, unsigned int bits);
+
+#define RESOURCE_DMA1_HPS	0x1
+#define RESOURCE_DMA2_CLP	0x2
+#define RESOURCE_DMA3_BRS	0x4
+
+/* saa7146 source inputs */
+#define SAA7146_HPS_SOURCE_PORT_A	0x00
+#define SAA7146_HPS_SOURCE_PORT_B	0x01
+#define SAA7146_HPS_SOURCE_YPB_CPA	0x02
+#define SAA7146_HPS_SOURCE_YPA_CPB	0x03
+
+/* sync inputs */
+#define SAA7146_HPS_SYNC_PORT_A		0x00
+#define SAA7146_HPS_SYNC_PORT_B		0x01
+
+/* some memory sizes */
+/* max. 16 clipping rectangles */
+#define SAA7146_CLIPPING_MEM	(16 * 4 * sizeof(u32))
+
+/* some defines for the various clipping-modes */
+#define SAA7146_CLIPPING_RECT		0x4
+#define SAA7146_CLIPPING_RECT_INVERTED	0x5
+#define SAA7146_CLIPPING_MASK		0x6
+#define SAA7146_CLIPPING_MASK_INVERTED	0x7
+
+/* output formats: each entry holds four informations */
+#define RGB08_COMPOSED	0x0217 /* composed is used in the sense of "not-planar" */
+/* this means: planar?=0, yuv2rgb-conversation-mode=2, dither=yes(=1), format-mode = 7 */
+#define RGB15_COMPOSED	0x0213
+#define RGB16_COMPOSED	0x0210
+#define RGB24_COMPOSED	0x0201
+#define RGB32_COMPOSED	0x0202
+
+#define Y8			0x0006
+#define YUV411_COMPOSED		0x0003
+#define YUV422_COMPOSED		0x0000
+/* this means: planar?=1, yuv2rgb-conversion-mode=0, dither=no(=0), format-mode = b */
+#define YUV411_DECOMPOSED	0x100b
+#define YUV422_DECOMPOSED	0x1009
+#define YUV420_DECOMPOSED	0x100a
+
+#define IS_PLANAR(x) (x & 0xf000)
+
+/* misc defines */
+#define SAA7146_NO_SWAP		(0x0)
+#define SAA7146_TWO_BYTE_SWAP	(0x1)
+#define SAA7146_FOUR_BYTE_SWAP	(0x2)
+
+#endif
diff --git a/include/media/sh_mobile_ceu.h b/include/media/sh_mobile_ceu.h
new file mode 100644
index 00000000..a90a765f
--- /dev/null
+++ b/include/media/sh_mobile_ceu.h
@@ -0,0 +1,26 @@
+#ifndef __ASM_SH_MOBILE_CEU_H__
+#define __ASM_SH_MOBILE_CEU_H__
+
+#define SH_CEU_FLAG_USE_8BIT_BUS	(1 << 0) /* use  8bit bus width */
+#define SH_CEU_FLAG_USE_16BIT_BUS	(1 << 1) /* use 16bit bus width */
+#define SH_CEU_FLAG_HSYNC_LOW		(1 << 2) /* default High if possible */
+#define SH_CEU_FLAG_VSYNC_LOW		(1 << 3) /* default High if possible */
+
+struct device;
+struct resource;
+
+struct sh_mobile_ceu_companion {
+	u32		num_resources;
+	struct resource	*resource;
+	int		id;
+	void		*platform_data;
+};
+
+struct sh_mobile_ceu_info {
+	unsigned long flags;
+	int max_width;
+	int max_height;
+	struct sh_mobile_ceu_companion *csi2;
+};
+
+#endif /* __ASM_SH_MOBILE_CEU_H__ */
diff --git a/include/media/sh_mobile_csi2.h b/include/media/sh_mobile_csi2.h
new file mode 100644
index 00000000..c586c4f7
--- /dev/null
+++ b/include/media/sh_mobile_csi2.h
@@ -0,0 +1,48 @@
+/*
+ * Driver header for the SH-Mobile MIPI CSI-2 unit
+ *
+ * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef SH_MIPI_CSI
+#define SH_MIPI_CSI
+
+#include <linux/list.h>
+
+enum sh_csi2_phy {
+	SH_CSI2_PHY_MAIN,
+	SH_CSI2_PHY_SUB,
+};
+
+enum sh_csi2_type {
+	SH_CSI2C,
+	SH_CSI2I,
+};
+
+#define SH_CSI2_CRC	(1 << 0)
+#define SH_CSI2_ECC	(1 << 1)
+
+struct platform_device;
+
+struct sh_csi2_client_config {
+	enum sh_csi2_phy phy;
+	unsigned char lanes;		/* bitmask[3:0] */
+	unsigned char channel;		/* 0..3 */
+	struct platform_device *pdev;	/* client platform device */
+};
+
+struct v4l2_device;
+
+struct sh_csi2_pdata {
+	enum sh_csi2_type type;
+	unsigned int flags;
+	struct sh_csi2_client_config *clients;
+	int num_clients;
+	struct v4l2_device *v4l2_dev;
+};
+
+#endif
diff --git a/include/media/sh_vou.h b/include/media/sh_vou.h
new file mode 100644
index 00000000..ec3ba9a5
--- /dev/null
+++ b/include/media/sh_vou.h
@@ -0,0 +1,33 @@
+/*
+ * SuperH Video Output Unit (VOU) driver header
+ *
+ * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef SH_VOU_H
+#define SH_VOU_H
+
+#include <linux/i2c.h>
+
+/* Bus flags */
+#define SH_VOU_PCLK_FALLING	(1 << 0)
+#define SH_VOU_HSYNC_LOW	(1 << 1)
+#define SH_VOU_VSYNC_LOW	(1 << 2)
+
+enum sh_vou_bus_fmt {
+	SH_VOU_BUS_8BIT,
+	SH_VOU_BUS_16BIT,
+	SH_VOU_BUS_BT656,
+};
+
+struct sh_vou_pdata {
+	enum sh_vou_bus_fmt bus_fmt;
+	int i2c_adap;
+	struct i2c_board_info *board_info;
+	unsigned long flags;
+};
+
+#endif
diff --git a/include/media/si4713.h b/include/media/si4713.h
new file mode 100644
index 00000000..ed7353e8
--- /dev/null
+++ b/include/media/si4713.h
@@ -0,0 +1,48 @@
+/*
+ * include/media/si4713.h
+ *
+ * Board related data definitions for Si4713 i2c device driver.
+ *
+ * Copyright (c) 2009 Nokia Corporation
+ * Contact: Eduardo Valentin <eduardo.valentin@nokia.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+#ifndef SI4713_H
+#define SI4713_H
+
+/* The SI4713 I2C sensor chip has a fixed slave address of 0xc6 or 0x22. */
+#define SI4713_I2C_ADDR_BUSEN_HIGH	0x63
+#define SI4713_I2C_ADDR_BUSEN_LOW	0x11
+
+/*
+ * Platform dependent definition
+ */
+struct si4713_platform_data {
+	int gpio_reset; /* < 0 if not used */
+};
+
+/*
+ * Structure to query for Received Noise Level (RNL).
+ */
+struct si4713_rnl {
+	__u32 index;		/* modulator index */
+	__u32 frequency;	/* frequency to peform rnl measurement */
+	__s32 rnl;		/* result of measurement in dBuV */
+	__u32 reserved[4];	/* drivers and apps must init this to 0 */
+};
+
+/*
+ * This is the ioctl number to query for rnl. Users must pass a
+ * struct si4713_rnl pointer specifying desired frequency in 'frequency' field
+ * following driver capabilities (i.e V4L2_TUNER_CAP_LOW).
+ * Driver must return measured value in the same struture, filling 'rnl' field.
+ */
+#define SI4713_IOC_MEASURE_RNL	_IOWR('V', BASE_VIDIOC_PRIVATE + 0, \
+						struct si4713_rnl)
+
+#endif /* ifndef SI4713_H*/
diff --git a/include/media/sii9234.h b/include/media/sii9234.h
new file mode 100644
index 00000000..6a4a809f
--- /dev/null
+++ b/include/media/sii9234.h
@@ -0,0 +1,24 @@
+/*
+ * Driver header for SII9234 MHL converter chip.
+ *
+ * Copyright (c) 2011 Samsung Electronics, Co. Ltd
+ * Contact: Tomasz Stanislawski <t.stanislaws@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef SII9234_H
+#define SII9234_H
+
+/**
+ * @gpio_n_reset: GPIO driving nRESET pin
+ */
+
+struct sii9234_platform_data {
+	int gpio_n_reset;
+};
+
+#endif /* SII9234_H */
diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h
new file mode 100644
index 00000000..cad374bd
--- /dev/null
+++ b/include/media/soc_camera.h
@@ -0,0 +1,291 @@
+/*
+ * camera image capture (abstract) bus driver header
+ *
+ * Copyright (C) 2006, Sascha Hauer, Pengutronix
+ * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef SOC_CAMERA_H
+#define SOC_CAMERA_H
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/pm.h>
+#include <linux/videodev2.h>
+#include <media/videobuf-core.h>
+#include <media/videobuf2-core.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+
+struct file;
+struct soc_camera_link;
+
+struct soc_camera_device {
+	struct list_head list;		/* list of all registered devices */
+	struct soc_camera_link *link;
+	struct device *pdev;		/* Platform device */
+	struct device *parent;		/* Camera host device */
+	struct device *control;		/* E.g., the i2c client */
+	s32 user_width;
+	s32 user_height;
+	u32 bytesperline;		/* for padding, zero if unused */
+	u32 sizeimage;
+	enum v4l2_colorspace colorspace;
+	unsigned char iface;		/* Host number */
+	unsigned char devnum;		/* Device number per host */
+	struct soc_camera_sense *sense;	/* See comment in struct definition */
+	struct video_device *vdev;
+	struct v4l2_ctrl_handler ctrl_handler;
+	const struct soc_camera_format_xlate *current_fmt;
+	struct soc_camera_format_xlate *user_formats;
+	int num_user_formats;
+	enum v4l2_field field;		/* Preserve field over close() */
+	void *host_priv;		/* Per-device host private data */
+	/* soc_camera.c private count. Only accessed with .video_lock held */
+	int use_count;
+	struct mutex video_lock;	/* Protects device data */
+	struct file *streamer;		/* stream owner */
+	union {
+		struct videobuf_queue vb_vidq;
+		struct vb2_queue vb2_vidq;
+	};
+};
+
+struct soc_camera_host {
+	struct v4l2_device v4l2_dev;
+	struct list_head list;
+	struct mutex host_lock;		/* Protect during probing */
+	unsigned char nr;		/* Host number */
+	void *priv;
+	const char *drv_name;
+	struct soc_camera_host_ops *ops;
+};
+
+struct soc_camera_host_ops {
+	struct module *owner;
+	int (*add)(struct soc_camera_device *);
+	void (*remove)(struct soc_camera_device *);
+	/*
+	 * .get_formats() is called for each client device format, but
+	 * .put_formats() is only called once. Further, if any of the calls to
+	 * .get_formats() fail, .put_formats() will not be called at all, the
+	 * failing .get_formats() must then clean up internally.
+	 */
+	int (*get_formats)(struct soc_camera_device *, unsigned int,
+			   struct soc_camera_format_xlate *);
+	void (*put_formats)(struct soc_camera_device *);
+	int (*cropcap)(struct soc_camera_device *, struct v4l2_cropcap *);
+	int (*get_crop)(struct soc_camera_device *, struct v4l2_crop *);
+	int (*set_crop)(struct soc_camera_device *, struct v4l2_crop *);
+	/*
+	 * The difference to .set_crop() is, that .set_livecrop is not allowed
+	 * to change the output sizes
+	 */
+	int (*set_livecrop)(struct soc_camera_device *, struct v4l2_crop *);
+	int (*set_fmt)(struct soc_camera_device *, struct v4l2_format *);
+	int (*try_fmt)(struct soc_camera_device *, struct v4l2_format *);
+	void (*init_videobuf)(struct videobuf_queue *,
+			      struct soc_camera_device *);
+	int (*init_videobuf2)(struct vb2_queue *,
+			      struct soc_camera_device *);
+	int (*reqbufs)(struct soc_camera_device *, struct v4l2_requestbuffers *);
+	int (*querycap)(struct soc_camera_host *, struct v4l2_capability *);
+	int (*set_bus_param)(struct soc_camera_device *);
+	int (*get_parm)(struct soc_camera_device *, struct v4l2_streamparm *);
+	int (*set_parm)(struct soc_camera_device *, struct v4l2_streamparm *);
+	int (*enum_fsizes)(struct soc_camera_device *, struct v4l2_frmsizeenum *);
+	unsigned int (*poll)(struct file *, poll_table *);
+};
+
+#define SOCAM_SENSOR_INVERT_PCLK	(1 << 0)
+#define SOCAM_SENSOR_INVERT_MCLK	(1 << 1)
+#define SOCAM_SENSOR_INVERT_HSYNC	(1 << 2)
+#define SOCAM_SENSOR_INVERT_VSYNC	(1 << 3)
+#define SOCAM_SENSOR_INVERT_DATA	(1 << 4)
+
+struct i2c_board_info;
+struct regulator_bulk_data;
+
+struct soc_camera_link {
+	/* Camera bus id, used to match a camera and a bus */
+	int bus_id;
+	/* Per camera SOCAM_SENSOR_* bus flags */
+	unsigned long flags;
+	int i2c_adapter_id;
+	struct i2c_board_info *board_info;
+	const char *module_name;
+	void *priv;
+
+	/* Optional regulators that have to be managed on power on/off events */
+	struct regulator_bulk_data *regulators;
+	int num_regulators;
+
+	/*
+	 * For non-I2C devices platform has to provide methods to add a device
+	 * to the system and to remove it
+	 */
+	int (*add_device)(struct soc_camera_device *);
+	void (*del_device)(struct soc_camera_device *);
+	/* Optional callbacks to power on or off and reset the sensor */
+	int (*power)(struct device *, int);
+	int (*reset)(struct device *);
+	/*
+	 * some platforms may support different data widths than the sensors
+	 * native ones due to different data line routing. Let the board code
+	 * overwrite the width flags.
+	 */
+	int (*set_bus_param)(struct soc_camera_link *, unsigned long flags);
+	unsigned long (*query_bus_param)(struct soc_camera_link *);
+	void (*free_bus)(struct soc_camera_link *);
+};
+
+static inline struct soc_camera_host *to_soc_camera_host(
+	const struct device *dev)
+{
+	struct v4l2_device *v4l2_dev = dev_get_drvdata(dev);
+
+	return container_of(v4l2_dev, struct soc_camera_host, v4l2_dev);
+}
+
+static inline struct soc_camera_link *to_soc_camera_link(
+	const struct soc_camera_device *icd)
+{
+	return icd->link;
+}
+
+static inline struct device *to_soc_camera_control(
+	const struct soc_camera_device *icd)
+{
+	return icd->control;
+}
+
+static inline struct v4l2_subdev *soc_camera_to_subdev(
+	const struct soc_camera_device *icd)
+{
+	struct device *control = to_soc_camera_control(icd);
+	return dev_get_drvdata(control);
+}
+
+int soc_camera_host_register(struct soc_camera_host *ici);
+void soc_camera_host_unregister(struct soc_camera_host *ici);
+
+const struct soc_camera_format_xlate *soc_camera_xlate_by_fourcc(
+	struct soc_camera_device *icd, unsigned int fourcc);
+
+/**
+ * struct soc_camera_format_xlate - match between host and sensor formats
+ * @code: code of a sensor provided format
+ * @host_fmt: host format after host translation from code
+ *
+ * Host and sensor translation structure. Used in table of host and sensor
+ * formats matchings in soc_camera_device. A host can override the generic list
+ * generation by implementing get_formats(), and use it for format checks and
+ * format setup.
+ */
+struct soc_camera_format_xlate {
+	enum v4l2_mbus_pixelcode code;
+	const struct soc_mbus_pixelfmt *host_fmt;
+};
+
+#define SOCAM_SENSE_PCLK_CHANGED	(1 << 0)
+
+/**
+ * This struct can be attached to struct soc_camera_device by the host driver
+ * to request sense from the camera, for example, when calling .set_fmt(). The
+ * host then can check which flags are set and verify respective values if any.
+ * For example, if SOCAM_SENSE_PCLK_CHANGED is set, it means, pixclock has
+ * changed during this operation. After completion the host should detach sense.
+ *
+ * @flags		ored SOCAM_SENSE_* flags
+ * @master_clock	if the host wants to be informed about pixel-clock
+ *			change, it better set master_clock.
+ * @pixel_clock_max	maximum pixel clock frequency supported by the host,
+ *			camera is not allowed to exceed this.
+ * @pixel_clock		if the camera driver changed pixel clock during this
+ *			operation, it sets SOCAM_SENSE_PCLK_CHANGED, uses
+ *			master_clock to calculate the new pixel-clock and
+ *			sets this field.
+ */
+struct soc_camera_sense {
+	unsigned long flags;
+	unsigned long master_clock;
+	unsigned long pixel_clock_max;
+	unsigned long pixel_clock;
+};
+
+#define SOCAM_DATAWIDTH(x)	BIT((x) - 1)
+#define SOCAM_DATAWIDTH_4	SOCAM_DATAWIDTH(4)
+#define SOCAM_DATAWIDTH_8	SOCAM_DATAWIDTH(8)
+#define SOCAM_DATAWIDTH_9	SOCAM_DATAWIDTH(9)
+#define SOCAM_DATAWIDTH_10	SOCAM_DATAWIDTH(10)
+#define SOCAM_DATAWIDTH_15	SOCAM_DATAWIDTH(15)
+#define SOCAM_DATAWIDTH_16	SOCAM_DATAWIDTH(16)
+
+#define SOCAM_DATAWIDTH_MASK (SOCAM_DATAWIDTH_4 | SOCAM_DATAWIDTH_8 | \
+			      SOCAM_DATAWIDTH_9 | SOCAM_DATAWIDTH_10 | \
+			      SOCAM_DATAWIDTH_15 | SOCAM_DATAWIDTH_16)
+
+static inline void soc_camera_limit_side(int *start, int *length,
+		unsigned int start_min,
+		unsigned int length_min, unsigned int length_max)
+{
+	if (*length < length_min)
+		*length = length_min;
+	else if (*length > length_max)
+		*length = length_max;
+
+	if (*start < start_min)
+		*start = start_min;
+	else if (*start > start_min + length_max - *length)
+		*start = start_min + length_max - *length;
+}
+
+unsigned long soc_camera_apply_sensor_flags(struct soc_camera_link *icl,
+					    unsigned long flags);
+unsigned long soc_camera_apply_board_flags(struct soc_camera_link *icl,
+					   const struct v4l2_mbus_config *cfg);
+
+/* This is only temporary here - until v4l2-subdev begins to link to video_device */
+#include <linux/i2c.h>
+static inline struct video_device *soc_camera_i2c_to_vdev(const struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct soc_camera_device *icd = v4l2_get_subdev_hostdata(sd);
+	return icd ? icd->vdev : NULL;
+}
+
+static inline struct soc_camera_link *soc_camera_i2c_to_link(const struct i2c_client *client)
+{
+	return client->dev.platform_data;
+}
+
+static inline struct v4l2_subdev *soc_camera_vdev_to_subdev(const struct video_device *vdev)
+{
+	struct soc_camera_device *icd = dev_get_drvdata(vdev->parent);
+	return soc_camera_to_subdev(icd);
+}
+
+static inline struct soc_camera_device *soc_camera_from_vb2q(const struct vb2_queue *vq)
+{
+	return container_of(vq, struct soc_camera_device, vb2_vidq);
+}
+
+static inline struct soc_camera_device *soc_camera_from_vbq(const struct videobuf_queue *vq)
+{
+	return container_of(vq, struct soc_camera_device, vb_vidq);
+}
+
+static inline u32 soc_camera_grp_id(const struct soc_camera_device *icd)
+{
+	return (icd->iface << 8) | (icd->devnum + 1);
+}
+
+void soc_camera_lock(struct vb2_queue *vq);
+void soc_camera_unlock(struct vb2_queue *vq);
+
+#endif
diff --git a/include/media/soc_camera_platform.h b/include/media/soc_camera_platform.h
new file mode 100644
index 00000000..8aa4200a
--- /dev/null
+++ b/include/media/soc_camera_platform.h
@@ -0,0 +1,79 @@
+/*
+ * Generic Platform Camera Driver Header
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SOC_CAMERA_H__
+#define __SOC_CAMERA_H__
+
+#include <linux/videodev2.h>
+#include <media/soc_camera.h>
+#include <media/v4l2-mediabus.h>
+
+struct device;
+
+struct soc_camera_platform_info {
+	const char *format_name;
+	unsigned long format_depth;
+	struct v4l2_mbus_framefmt format;
+	unsigned long mbus_param;
+	enum v4l2_mbus_type mbus_type;
+	struct soc_camera_device *icd;
+	int (*set_capture)(struct soc_camera_platform_info *info, int enable);
+};
+
+static inline void soc_camera_platform_release(struct platform_device **pdev)
+{
+	*pdev = NULL;
+}
+
+static inline int soc_camera_platform_add(struct soc_camera_device *icd,
+					  struct platform_device **pdev,
+					  struct soc_camera_link *plink,
+					  void (*release)(struct device *dev),
+					  int id)
+{
+	struct soc_camera_platform_info *info = plink->priv;
+	int ret;
+
+	if (icd->link != plink)
+		return -ENODEV;
+
+	if (*pdev)
+		return -EBUSY;
+
+	*pdev = platform_device_alloc("soc_camera_platform", id);
+	if (!*pdev)
+		return -ENOMEM;
+
+	info->icd = icd;
+
+	(*pdev)->dev.platform_data = info;
+	(*pdev)->dev.release = release;
+
+	ret = platform_device_add(*pdev);
+	if (ret < 0) {
+		platform_device_put(*pdev);
+		*pdev = NULL;
+		info->icd = NULL;
+	}
+
+	return ret;
+}
+
+static inline void soc_camera_platform_del(const struct soc_camera_device *icd,
+					   struct platform_device *pdev,
+					   const struct soc_camera_link *plink)
+{
+	if (icd->link != plink || !pdev)
+		return;
+
+	platform_device_unregister(pdev);
+}
+
+#endif /* __SOC_CAMERA_H__ */
diff --git a/include/media/soc_mediabus.h b/include/media/soc_mediabus.h
new file mode 100644
index 00000000..73f1e7eb
--- /dev/null
+++ b/include/media/soc_mediabus.h
@@ -0,0 +1,88 @@
+/*
+ * SoC-camera Media Bus API extensions
+ *
+ * Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef SOC_MEDIABUS_H
+#define SOC_MEDIABUS_H
+
+#include <linux/videodev2.h>
+#include <linux/v4l2-mediabus.h>
+
+/**
+ * enum soc_mbus_packing - data packing types on the media-bus
+ * @SOC_MBUS_PACKING_NONE:	no packing, bit-for-bit transfer to RAM, one
+ *				sample represents one pixel
+ * @SOC_MBUS_PACKING_2X8_PADHI:	16 bits transferred in 2 8-bit samples, in the
+ *				possibly incomplete byte high bits are padding
+ * @SOC_MBUS_PACKING_2X8_PADLO:	as above, but low bits are padding
+ * @SOC_MBUS_PACKING_EXTEND16:	sample width (e.g., 10 bits) has to be extended
+ *				to 16 bits
+ * @SOC_MBUS_PACKING_VARIABLE:	compressed formats with variable packing
+ * @SOC_MBUS_PACKING_1_5X8:	used for packed YUV 4:2:0 formats, where 4
+ *				pixels occupy 6 bytes in RAM
+ */
+enum soc_mbus_packing {
+	SOC_MBUS_PACKING_NONE,
+	SOC_MBUS_PACKING_2X8_PADHI,
+	SOC_MBUS_PACKING_2X8_PADLO,
+	SOC_MBUS_PACKING_EXTEND16,
+	SOC_MBUS_PACKING_VARIABLE,
+	SOC_MBUS_PACKING_1_5X8,
+};
+
+/**
+ * enum soc_mbus_order - sample order on the media bus
+ * @SOC_MBUS_ORDER_LE:		least significant sample first
+ * @SOC_MBUS_ORDER_BE:		most significant sample first
+ */
+enum soc_mbus_order {
+	SOC_MBUS_ORDER_LE,
+	SOC_MBUS_ORDER_BE,
+};
+
+/**
+ * struct soc_mbus_pixelfmt - Data format on the media bus
+ * @name:		Name of the format
+ * @fourcc:		Fourcc code, that will be obtained if the data is
+ *			stored in memory in the following way:
+ * @packing:		Type of sample-packing, that has to be used
+ * @order:		Sample order when storing in memory
+ * @bits_per_sample:	How many bits the bridge has to sample
+ */
+struct soc_mbus_pixelfmt {
+	const char		*name;
+	u32			fourcc;
+	enum soc_mbus_packing	packing;
+	enum soc_mbus_order	order;
+	u8			bits_per_sample;
+};
+
+/**
+ * struct soc_mbus_lookup - Lookup FOURCC IDs by mediabus codes for pass-through
+ * @code:	mediabus pixel-code
+ * @fmt:	pixel format description
+ */
+struct soc_mbus_lookup {
+	enum v4l2_mbus_pixelcode	code;
+	struct soc_mbus_pixelfmt	fmt;
+};
+
+const struct soc_mbus_pixelfmt *soc_mbus_find_fmtdesc(
+	enum v4l2_mbus_pixelcode code,
+	const struct soc_mbus_lookup *lookup,
+	int n);
+const struct soc_mbus_pixelfmt *soc_mbus_get_fmtdesc(
+	enum v4l2_mbus_pixelcode code);
+s32 soc_mbus_bytes_per_line(u32 width, const struct soc_mbus_pixelfmt *mf);
+int soc_mbus_samples_per_pixel(const struct soc_mbus_pixelfmt *mf,
+			unsigned int *numerator, unsigned int *denominator);
+unsigned int soc_mbus_config_compatible(const struct v4l2_mbus_config *cfg,
+					unsigned int flags);
+
+#endif
diff --git a/include/media/sr030pc30.h b/include/media/sr030pc30.h
new file mode 100644
index 00000000..6f901a65
--- /dev/null
+++ b/include/media/sr030pc30.h
@@ -0,0 +1,21 @@
+/*
+ * Driver header for SR030PC30 camera sensor
+ *
+ * Copyright (c) 2010 Samsung Electronics, Co. Ltd
+ * Contact: Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef SR030PC30_H
+#define SR030PC30_H
+
+struct sr030pc30_platform_data {
+	unsigned long clk_rate;	/* master clock frequency in Hz */
+	int (*set_power)(struct device *dev, int on);
+};
+
+#endif /* SR030PC30_H */
diff --git a/include/media/timb_radio.h b/include/media/timb_radio.h
new file mode 100644
index 00000000..a40a6a34
--- /dev/null
+++ b/include/media/timb_radio.h
@@ -0,0 +1,30 @@
+/*
+ * timb_radio.h Platform struct for the Timberdale radio driver
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _TIMB_RADIO_
+#define _TIMB_RADIO_ 1
+
+#include <linux/i2c.h>
+
+struct timb_radio_platform_data {
+	int i2c_adapter; /* I2C adapter where the tuner and dsp are attached */
+	struct i2c_board_info *tuner;
+	struct i2c_board_info *dsp;
+};
+
+#endif
diff --git a/include/media/timb_video.h b/include/media/timb_video.h
new file mode 100644
index 00000000..70ae4397
--- /dev/null
+++ b/include/media/timb_video.h
@@ -0,0 +1,33 @@
+/*
+ * timb_video.h Platform struct for the Timberdale video driver
+ * Copyright (c) 2009-2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _TIMB_VIDEO_
+#define _TIMB_VIDEO_ 1
+
+#include <linux/i2c.h>
+
+struct timb_video_platform_data {
+	int dma_channel;
+	int i2c_adapter; /* The I2C adapter where the encoder is attached */
+	struct {
+		const char *module_name;
+		struct i2c_board_info *info;
+	} encoder;
+};
+
+#endif
diff --git a/include/media/tuner-types.h b/include/media/tuner-types.h
new file mode 100644
index 00000000..ab03c534
--- /dev/null
+++ b/include/media/tuner-types.h
@@ -0,0 +1,131 @@
+/*
+ * descriptions for simple tuners.
+ */
+
+#ifndef __TUNER_TYPES_H__
+#define __TUNER_TYPES_H__
+
+enum param_type {
+	TUNER_PARAM_TYPE_RADIO,
+	TUNER_PARAM_TYPE_PAL,
+	TUNER_PARAM_TYPE_SECAM,
+	TUNER_PARAM_TYPE_NTSC,
+	TUNER_PARAM_TYPE_DIGITAL,
+};
+
+struct tuner_range {
+	unsigned short limit;
+	unsigned char config;
+	unsigned char cb;
+};
+
+struct tuner_params {
+	enum param_type type;
+
+	/* Many Philips based tuners have a comment like this in their
+	 * datasheet:
+	 *
+	 *   For channel selection involving band switching, and to ensure
+	 *   smooth tuning to the desired channel without causing
+	 *   unnecessary charge pump action, it is recommended to consider
+	 *   the difference between wanted channel frequency and the
+	 *   current channel frequency.  Unnecessary charge pump action
+	 *   will result in very low tuning voltage which may drive the
+	 *   oscillator to extreme conditions.
+	 *
+	 * Set cb_first_if_lower_freq to 1, if this check is
+	 * required for this tuner.
+	 *
+	 * I tested this for PAL by first setting the TV frequency to
+	 * 203 MHz and then switching to 96.6 MHz FM radio. The result was
+	 * static unless the control byte was sent first.
+	 */
+	unsigned int cb_first_if_lower_freq:1;
+	/* Set to 1 if this tuner uses a tda9887 */
+	unsigned int has_tda9887:1;
+	/* Many Philips tuners use tda9887 PORT1 to select the FM radio
+	   sensitivity. If this setting is 1, then set PORT1 to 1 to
+	   get proper FM reception. */
+	unsigned int port1_fm_high_sensitivity:1;
+	/* Some Philips tuners use tda9887 PORT2 to select the FM radio
+	   sensitivity. If this setting is 1, then set PORT2 to 1 to
+	   get proper FM reception. */
+	unsigned int port2_fm_high_sensitivity:1;
+	/* Some Philips tuners use tda9887 cGainNormal to select the FM radio
+	   sensitivity. If this setting is 1, e register will use cGainNormal
+	   instead of cGainLow. */
+	unsigned int fm_gain_normal:1;
+	/* Most tuners with a tda9887 use QSS mode. Some (cheaper) tuners
+	   use Intercarrier mode. If this setting is 1, then the tuner
+	   needs to be set to intercarrier mode. */
+	unsigned int intercarrier_mode:1;
+	/* This setting sets the default value for PORT1.
+	   0 means inactive, 1 means active. Note: the actual bit
+	   value written to the tda9887 is inverted. So a 0 here
+	   means a 1 in the B6 bit. */
+	unsigned int port1_active:1;
+	/* This setting sets the default value for PORT2.
+	   0 means inactive, 1 means active. Note: the actual bit
+	   value written to the tda9887 is inverted. So a 0 here
+	   means a 1 in the B7 bit. */
+	unsigned int port2_active:1;
+	/* Sometimes PORT1 is inverted when the SECAM-L' standard is selected.
+	   Set this bit to 1 if this is needed. */
+	unsigned int port1_invert_for_secam_lc:1;
+	/* Sometimes PORT2 is inverted when the SECAM-L' standard is selected.
+	   Set this bit to 1 if this is needed. */
+	unsigned int port2_invert_for_secam_lc:1;
+	/* Some cards require PORT1 to be 1 for mono Radio FM and 0 for stereo. */
+	unsigned int port1_set_for_fm_mono:1;
+	/* Select 18% (or according to datasheet 0%) L standard PLL gating,
+	   vs the driver default of 36%. */
+	unsigned int default_pll_gating_18:1;
+	/* IF to use in radio mode.  Tuners with a separate radio IF filter
+	   seem to use 10.7, while those without use 33.3 for PAL/SECAM tuners
+	   and 41.3 for NTSC tuners. 0 = 10.7, 1 = 33.3, 2 = 41.3 */
+	unsigned int radio_if:2;
+	/* Default tda9887 TOP value in dB for the low band. Default is 0.
+	   Range: -16:+15 */
+	signed int default_top_low:5;
+	/* Default tda9887 TOP value in dB for the mid band. Default is 0.
+	   Range: -16:+15 */
+	signed int default_top_mid:5;
+	/* Default tda9887 TOP value in dB for the high band. Default is 0.
+	   Range: -16:+15 */
+	signed int default_top_high:5;
+	/* Default tda9887 TOP value in dB for SECAM-L/L' for the low band.
+	   Default is 0. Several tuners require a different TOP value for
+	   the SECAM-L/L' standards. Range: -16:+15 */
+	signed int default_top_secam_low:5;
+	/* Default tda9887 TOP value in dB for SECAM-L/L' for the mid band.
+	   Default is 0. Several tuners require a different TOP value for
+	   the SECAM-L/L' standards. Range: -16:+15 */
+	signed int default_top_secam_mid:5;
+	/* Default tda9887 TOP value in dB for SECAM-L/L' for the high band.
+	   Default is 0. Several tuners require a different TOP value for
+	   the SECAM-L/L' standards. Range: -16:+15 */
+	signed int default_top_secam_high:5;
+
+	u16 iffreq;
+
+	unsigned int count;
+	struct tuner_range *ranges;
+};
+
+struct tunertype {
+	char *name;
+	unsigned int count;
+	struct tuner_params *params;
+
+	u16 min;
+	u16 max;
+	u32 stepsize;
+
+	u8 *initdata;
+	u8 *sleepdata;
+};
+
+extern struct tunertype tuners[];
+extern unsigned const int tuner_count;
+
+#endif
diff --git a/include/media/tuner.h b/include/media/tuner.h
new file mode 100644
index 00000000..926aff9b
--- /dev/null
+++ b/include/media/tuner.h
@@ -0,0 +1,197 @@
+/*
+    tuner.h - definition for different tuners
+
+    Copyright (C) 1997 Markus Schroeder (schroedm@uni-duesseldorf.de)
+    minor modifications by Ralph Metzler (rjkm@thp.uni-koeln.de)
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _TUNER_H
+#define _TUNER_H
+#ifdef __KERNEL__
+
+#include <linux/videodev2.h>
+
+#define ADDR_UNSET (255)
+
+#define TUNER_TEMIC_PAL			0        /* 4002 FH5 (3X 7756, 9483) */
+#define TUNER_PHILIPS_PAL_I		1
+#define TUNER_PHILIPS_NTSC		2
+#define TUNER_PHILIPS_SECAM		3	/* you must actively select B/G, L, L` */
+
+#define TUNER_ABSENT			4
+#define TUNER_PHILIPS_PAL		5
+#define TUNER_TEMIC_NTSC		6	/* 4032 FY5 (3X 7004, 9498, 9789)  */
+#define TUNER_TEMIC_PAL_I		7	/* 4062 FY5 (3X 8501, 9957) */
+
+#define TUNER_TEMIC_4036FY5_NTSC	8	/* 4036 FY5 (3X 1223, 1981, 7686) */
+#define TUNER_ALPS_TSBH1_NTSC		9
+#define TUNER_ALPS_TSBE1_PAL		10
+#define TUNER_ALPS_TSBB5_PAL_I		11
+
+#define TUNER_ALPS_TSBE5_PAL		12
+#define TUNER_ALPS_TSBC5_PAL		13
+#define TUNER_TEMIC_4006FH5_PAL		14	/* 4006 FH5 (3X 9500, 9501, 7291) */
+#define TUNER_ALPS_TSHC6_NTSC		15
+
+#define TUNER_TEMIC_PAL_DK		16	/* 4016 FY5 (3X 1392, 1393) */
+#define TUNER_PHILIPS_NTSC_M		17
+#define TUNER_TEMIC_4066FY5_PAL_I	18	/* 4066 FY5 (3X 7032, 7035) */
+#define TUNER_TEMIC_4006FN5_MULTI_PAL	19	/* B/G, I and D/K autodetected (3X 7595, 7606, 7657) */
+
+#define TUNER_TEMIC_4009FR5_PAL		20	/* incl. FM radio (3X 7607, 7488, 7711) */
+#define TUNER_TEMIC_4039FR5_NTSC	21	/* incl. FM radio (3X 7246, 7578, 7732) */
+#define TUNER_TEMIC_4046FM5		22	/* you must actively select B/G, D/K, I, L, L` !  (3X 7804, 7806, 8103, 8104) */
+#define TUNER_PHILIPS_PAL_DK		23
+
+#define TUNER_PHILIPS_FQ1216ME		24	/* you must actively select B/G/D/K, I, L, L` */
+#define TUNER_LG_PAL_I_FM		25
+#define TUNER_LG_PAL_I			26
+#define TUNER_LG_NTSC_FM		27
+
+#define TUNER_LG_PAL_FM			28
+#define TUNER_LG_PAL			29
+#define TUNER_TEMIC_4009FN5_MULTI_PAL_FM 30	/* B/G, I and D/K autodetected (3X 8155, 8160, 8163) */
+#define TUNER_SHARP_2U5JF5540_NTSC	31
+
+#define TUNER_Samsung_PAL_TCPM9091PD27	32
+#define TUNER_MT2032			33
+#define TUNER_TEMIC_4106FH5		34	/* 4106 FH5 (3X 7808, 7865) */
+#define TUNER_TEMIC_4012FY5		35	/* 4012 FY5 (3X 0971, 1099) */
+
+#define TUNER_TEMIC_4136FY5		36	/* 4136 FY5 (3X 7708, 7746) */
+#define TUNER_LG_PAL_NEW_TAPC		37
+#define TUNER_PHILIPS_FM1216ME_MK3	38
+#define TUNER_LG_NTSC_NEW_TAPC		39
+
+#define TUNER_HITACHI_NTSC		40
+#define TUNER_PHILIPS_PAL_MK		41
+#define TUNER_PHILIPS_FCV1236D		42
+#define TUNER_PHILIPS_FM1236_MK3	43
+
+#define TUNER_PHILIPS_4IN1		44	/* ATI TV Wonder Pro - Conexant */
+/* Microtune merged with Temic 12/31/1999 partially financed by Alps - these may be similar to Temic */
+#define TUNER_MICROTUNE_4049FM5 	45
+#define TUNER_PANASONIC_VP27		46
+#define TUNER_LG_NTSC_TAPE		47
+
+#define TUNER_TNF_8831BGFF		48
+#define TUNER_MICROTUNE_4042FI5		49	/* DViCO FusionHDTV 3 Gold-Q - 4042 FI5 (3X 8147) */
+#define TUNER_TCL_2002N			50
+#define TUNER_PHILIPS_FM1256_IH3	51
+
+#define TUNER_THOMSON_DTT7610		52
+#define TUNER_PHILIPS_FQ1286		53
+#define TUNER_PHILIPS_TDA8290		54
+#define TUNER_TCL_2002MB		55	/* Hauppauge PVR-150 PAL */
+
+#define TUNER_PHILIPS_FQ1216AME_MK4	56	/* Hauppauge PVR-150 PAL */
+#define TUNER_PHILIPS_FQ1236A_MK4	57	/* Hauppauge PVR-500MCE NTSC */
+#define TUNER_YMEC_TVF_8531MF		58
+#define TUNER_YMEC_TVF_5533MF		59	/* Pixelview Pro Ultra NTSC */
+
+#define TUNER_THOMSON_DTT761X		60	/* DTT 7611 7611A 7612 7613 7613A 7614 7615 7615A */
+#define TUNER_TENA_9533_DI		61
+#define TUNER_TEA5767			62	/* Only FM Radio Tuner */
+#define TUNER_PHILIPS_FMD1216ME_MK3	63
+
+#define TUNER_LG_TDVS_H06XF		64	/* TDVS H061F, H062F, H064F */
+#define TUNER_YMEC_TVF66T5_B_DFF	65	/* Acorp Y878F */
+#define TUNER_LG_TALN			66
+#define TUNER_PHILIPS_TD1316		67
+
+#define TUNER_PHILIPS_TUV1236D		68	/* ATI HDTV Wonder */
+#define TUNER_TNF_5335MF                69	/* Sabrent Bt848   */
+#define TUNER_SAMSUNG_TCPN_2121P30A     70 	/* Hauppauge PVR-500MCE NTSC */
+#define TUNER_XC2028			71
+
+#define TUNER_THOMSON_FE6600		72	/* DViCO FusionHDTV DVB-T Hybrid */
+#define TUNER_SAMSUNG_TCPG_6121P30A     73 	/* Hauppauge PVR-500 PAL */
+#define TUNER_TDA9887                   74      /* This tuner should be used only internally */
+#define TUNER_TEA5761			75	/* Only FM Radio Tuner */
+#define TUNER_XC5000			76	/* Xceive Silicon Tuner */
+#define TUNER_TCL_MF02GIP_5N		77	/* TCL MF02GIP_5N */
+#define TUNER_PHILIPS_FMD1216MEX_MK3	78
+#define TUNER_PHILIPS_FM1216MK5		79
+#define TUNER_PHILIPS_FQ1216LME_MK3	80	/* Active loopthrough, no FM */
+
+#define TUNER_PARTSNIC_PTI_5NF05	81
+#define TUNER_PHILIPS_CU1216L           82
+#define TUNER_NXP_TDA18271		83
+#define TUNER_SONY_BTF_PXN01Z		84
+#define TUNER_PHILIPS_FQ1236_MK5	85	/* NTSC, TDA9885, no FM radio */
+#define TUNER_TENA_TNF_5337		86
+
+#define TUNER_XC4000			87	/* Xceive Silicon Tuner */
+#define TUNER_XC5000C			88	/* Xceive Silicon Tuner */
+
+/* tv card specific */
+#define TDA9887_PRESENT 		(1<<0)
+#define TDA9887_PORT1_INACTIVE 		(1<<1)
+#define TDA9887_PORT2_INACTIVE 		(1<<2)
+#define TDA9887_QSS 			(1<<3)
+#define TDA9887_INTERCARRIER 		(1<<4)
+#define TDA9887_PORT1_ACTIVE 		(1<<5)
+#define TDA9887_PORT2_ACTIVE 		(1<<6)
+#define TDA9887_INTERCARRIER_NTSC 	(1<<7)
+/* Tuner takeover point adjustment, in dB, -16 <= top <= 15 */
+#define TDA9887_TOP_MASK 		(0x3f << 8)
+#define TDA9887_TOP_SET 		(1 << 13)
+#define TDA9887_TOP(top) 		(TDA9887_TOP_SET | (((16 + (top)) & 0x1f) << 8))
+
+/* config options */
+#define TDA9887_DEEMPHASIS_MASK 	(3<<16)
+#define TDA9887_DEEMPHASIS_NONE 	(1<<16)
+#define TDA9887_DEEMPHASIS_50 		(2<<16)
+#define TDA9887_DEEMPHASIS_75 		(3<<16)
+#define TDA9887_AUTOMUTE 		(1<<18)
+#define TDA9887_GATING_18		(1<<19)
+#define TDA9887_GAIN_NORMAL		(1<<20)
+#define TDA9887_RIF_41_3		(1<<21)  /* radio IF1 41.3 vs 33.3 */
+
+enum tuner_mode {
+	T_RADIO		= 1 << V4L2_TUNER_RADIO,
+	T_ANALOG_TV     = 1 << V4L2_TUNER_ANALOG_TV,
+	/* Don't need to map V4L2_TUNER_DIGITAL_TV, as tuner-core won't use it */
+};
+
+/* Older boards only had a single tuner device. Nowadays multiple tuner
+   devices may be present on a single board. Using TUNER_SET_TYPE_ADDR
+   to pass the tuner_setup structure it is possible to setup each tuner
+   device in turn.
+
+   Since multiple devices may be present it is no longer sufficient to
+   send a command to a single i2c device. Instead you should broadcast
+   the command to all i2c devices.
+
+   By setting the mode_mask correctly you can select which commands are
+   accepted by a specific tuner device. For example, set mode_mask to
+   T_RADIO if the device is a radio-only tuner. That specific tuner will
+   only accept commands when the tuner is in radio mode and ignore them
+   when the tuner is set to TV mode.
+ */
+
+struct tuner_setup {
+	unsigned short	addr; 	/* I2C address */
+	unsigned int	type;   /* Tuner type */
+	unsigned int	mode_mask;  /* Allowed tuner modes */
+	unsigned int	config; /* configuraion for more complex tuners */
+	int (*tuner_callback) (void *dev, int component, int cmd, int arg);
+};
+
+#endif /* __KERNEL__ */
+
+#endif /* _TUNER_H */
diff --git a/include/media/tvaudio.h b/include/media/tvaudio.h
new file mode 100644
index 00000000..1ac81846
--- /dev/null
+++ b/include/media/tvaudio.h
@@ -0,0 +1,49 @@
+/*
+    tvaudio.h - definition for tvaudio inputs
+
+    Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl)
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _TVAUDIO_H
+#define _TVAUDIO_H
+
+#include <media/i2c-addr.h>
+
+/* The tvaudio module accepts the following inputs: */
+#define TVAUDIO_INPUT_TUNER  0
+#define TVAUDIO_INPUT_RADIO  1
+#define TVAUDIO_INPUT_EXTERN 2
+#define TVAUDIO_INPUT_INTERN 3
+
+static inline const unsigned short *tvaudio_addrs(void)
+{
+	static const unsigned short addrs[] = {
+		I2C_ADDR_TDA8425   >> 1,
+		I2C_ADDR_TEA6300   >> 1,
+		I2C_ADDR_TEA6420   >> 1,
+		I2C_ADDR_TDA9840   >> 1,
+		I2C_ADDR_TDA985x_L >> 1,
+		I2C_ADDR_TDA985x_H >> 1,
+		I2C_ADDR_TDA9874   >> 1,
+		I2C_ADDR_PIC16C54  >> 1,
+		I2C_CLIENT_END
+	};
+
+	return addrs;
+}
+
+#endif
diff --git a/include/media/tveeprom.h b/include/media/tveeprom.h
new file mode 100644
index 00000000..a8ad75a9
--- /dev/null
+++ b/include/media/tveeprom.h
@@ -0,0 +1,38 @@
+/*
+ */
+
+struct tveeprom {
+	u32 has_radio;
+	/* If has_ir == 0, then it is unknown what the IR capabilities are,
+	   otherwise:
+	   bit 0: 1 (= IR capabilities are known)
+	   bit 1: IR receiver present
+	   bit 2: IR transmitter (blaster) present */
+	u32 has_ir;
+	u32 has_MAC_address; /* 0: no MAC, 1: MAC present, 2: unknown */
+
+	u32 tuner_type;
+	u32 tuner_formats;
+	u32 tuner_hauppauge_model;
+
+	u32 tuner2_type;
+	u32 tuner2_formats;
+	u32 tuner2_hauppauge_model;
+
+	u32 digitizer;
+	u32 digitizer_formats;
+
+	u32 audio_processor;
+	u32 decoder_processor;
+
+	u32 model;
+	u32 revision;
+	u32 serial_number;
+	char rev_str[5];
+	u8 MAC_address[6];
+};
+
+void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee,
+			       unsigned char *eeprom_data);
+
+int tveeprom_read(struct i2c_client *c, unsigned char *eedata, int len);
diff --git a/include/media/tvp514x.h b/include/media/tvp514x.h
new file mode 100644
index 00000000..74387e83
--- /dev/null
+++ b/include/media/tvp514x.h
@@ -0,0 +1,114 @@
+/*
+ * drivers/media/video/tvp514x.h
+ *
+ * Copyright (C) 2008 Texas Instruments Inc
+ * Author: Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * Contributors:
+ *     Sivaraj R <sivaraj@ti.com>
+ *     Brijesh R Jadav <brijesh.j@ti.com>
+ *     Hardik Shah <hardik.shah@ti.com>
+ *     Manjunath Hadli <mrh@ti.com>
+ *     Karicheri Muralidharan <m-karicheri2@ti.com>
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef _TVP514X_H
+#define _TVP514X_H
+
+/*
+ * Other macros
+ */
+#define TVP514X_MODULE_NAME		"tvp514x"
+
+#define TVP514X_XCLK_BT656		(27000000)
+
+/* Number of pixels and number of lines per frame for different standards */
+#define NTSC_NUM_ACTIVE_PIXELS		(720)
+#define NTSC_NUM_ACTIVE_LINES		(480)
+#define PAL_NUM_ACTIVE_PIXELS		(720)
+#define PAL_NUM_ACTIVE_LINES		(576)
+
+/**
+ * enum tvp514x_input - enum for different decoder input pin
+ *		configuration.
+ */
+enum tvp514x_input {
+	/*
+	 * CVBS input selection
+	 */
+	INPUT_CVBS_VI1A = 0x0,
+	INPUT_CVBS_VI1B,
+	INPUT_CVBS_VI1C,
+	INPUT_CVBS_VI2A = 0x04,
+	INPUT_CVBS_VI2B,
+	INPUT_CVBS_VI2C,
+	INPUT_CVBS_VI3A = 0x08,
+	INPUT_CVBS_VI3B,
+	INPUT_CVBS_VI3C,
+	INPUT_CVBS_VI4A = 0x0C,
+	/*
+	 * S-Video input selection
+	 */
+	INPUT_SVIDEO_VI2A_VI1A = 0x44,
+	INPUT_SVIDEO_VI2B_VI1B,
+	INPUT_SVIDEO_VI2C_VI1C,
+	INPUT_SVIDEO_VI2A_VI3A = 0x54,
+	INPUT_SVIDEO_VI2B_VI3B,
+	INPUT_SVIDEO_VI2C_VI3C,
+	INPUT_SVIDEO_VI4A_VI1A = 0x4C,
+	INPUT_SVIDEO_VI4A_VI1B,
+	INPUT_SVIDEO_VI4A_VI1C,
+	INPUT_SVIDEO_VI4A_VI3A = 0x5C,
+	INPUT_SVIDEO_VI4A_VI3B,
+	INPUT_SVIDEO_VI4A_VI3C,
+
+	/* Need to add entries for
+	 * RGB, YPbPr and SCART.
+	 */
+	INPUT_INVALID
+};
+
+/**
+ * enum tvp514x_output - enum for output format
+ *			supported.
+ *
+ */
+enum tvp514x_output {
+	OUTPUT_10BIT_422_EMBEDDED_SYNC = 0,
+	OUTPUT_20BIT_422_SEPERATE_SYNC,
+	OUTPUT_10BIT_422_SEPERATE_SYNC = 3,
+	OUTPUT_INVALID
+};
+
+/**
+ * struct tvp514x_platform_data - Platform data values and access functions.
+ * @power_set: Power state access function, zero is off, non-zero is on.
+ * @ifparm: Interface parameters access function.
+ * @priv_data_set: Device private data (pointer) access function.
+ * @clk_polarity: Clock polarity of the current interface.
+ * @ hs_polarity: HSYNC Polarity configuration for current interface.
+ * @ vs_polarity: VSYNC Polarity configuration for current interface.
+ */
+struct tvp514x_platform_data {
+	/* Interface control params */
+	bool clk_polarity;
+	bool hs_polarity;
+	bool vs_polarity;
+};
+
+
+#endif				/* ifndef _TVP514X_H */
diff --git a/include/media/tvp5150.h b/include/media/tvp5150.h
new file mode 100644
index 00000000..72bd2a2b
--- /dev/null
+++ b/include/media/tvp5150.h
@@ -0,0 +1,34 @@
+/*
+    tvp5150.h - definition for tvp5150 inputs
+
+    Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl)
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _TVP5150_H_
+#define _TVP5150_H_
+
+/* TVP5150 HW inputs */
+#define TVP5150_COMPOSITE0 0
+#define TVP5150_COMPOSITE1 1
+#define TVP5150_SVIDEO     2
+
+/* TVP5150 HW outputs */
+#define TVP5150_NORMAL       0
+#define TVP5150_BLACK_SCREEN 1
+
+#endif
+
diff --git a/include/media/tvp7002.h b/include/media/tvp7002.h
new file mode 100644
index 00000000..ee435345
--- /dev/null
+++ b/include/media/tvp7002.h
@@ -0,0 +1,56 @@
+/* Texas Instruments Triple 8-/10-BIT 165-/110-MSPS Video and Graphics
+ * Digitizer with Horizontal PLL registers
+ *
+ * Copyright (C) 2009 Texas Instruments Inc
+ * Author: Santiago Nunez-Corrales <santiago.nunez@ridgerun.com>
+ *
+ * This code is partially based upon the TVP5150 driver
+ * written by Mauro Carvalho Chehab (mchehab@infradead.org),
+ * the TVP514x driver written by Vaibhav Hiremath <hvaibhav@ti.com>
+ * and the TVP7002 driver in the TI LSP 2.10.00.14
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef _TVP7002_H_
+#define _TVP7002_H_
+
+/* Platform-dependent data
+ *
+ * clk_polarity:
+ * 			0 -> data clocked out on rising edge of DATACLK signal
+ * 			1 -> data clocked out on falling edge of DATACLK signal
+ * hs_polarity:
+ * 			0 -> active low HSYNC output
+ * 			1 -> active high HSYNC output
+ * sog_polarity:
+ * 			0 -> normal operation
+ * 			1 -> operation with polarity inverted
+ * vs_polarity:
+ * 			0 -> active low VSYNC output
+ * 			1 -> active high VSYNC output
+ * fid_polarity:
+ *			0 -> the field ID output is set to logic 1 for an odd
+ *			     field (field 1) and set to logic 0 for an even
+ *			     field (field 0).
+ *			1 -> operation with polarity inverted.
+ */
+struct tvp7002_config {
+	u8 clk_polarity;
+	u8 hs_polarity;
+	u8 vs_polarity;
+	u8 fid_polarity;
+	u8 sog_polarity;
+};
+#endif
diff --git a/include/media/tw9910.h b/include/media/tw9910.h
new file mode 100644
index 00000000..90bcf1fa
--- /dev/null
+++ b/include/media/tw9910.h
@@ -0,0 +1,38 @@
+/*
+ * tw9910 Driver header
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on ov772x.h
+ *
+ * Copyright (C) Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __TW9910_H__
+#define __TW9910_H__
+
+#include <media/soc_camera.h>
+
+enum tw9910_mpout_pin {
+	TW9910_MPO_VLOSS,
+	TW9910_MPO_HLOCK,
+	TW9910_MPO_SLOCK,
+	TW9910_MPO_VLOCK,
+	TW9910_MPO_MONO,
+	TW9910_MPO_DET50,
+	TW9910_MPO_FIELD,
+	TW9910_MPO_RTCO,
+};
+
+struct tw9910_video_info {
+	unsigned long		buswidth;
+	enum tw9910_mpout_pin	mpout;
+};
+
+
+#endif /* __TW9910_H__ */
diff --git a/include/media/upd64031a.h b/include/media/upd64031a.h
new file mode 100644
index 00000000..3ad6a32e
--- /dev/null
+++ b/include/media/upd64031a.h
@@ -0,0 +1,40 @@
+/*
+ * upd64031a - NEC Electronics Ghost Reduction input defines
+ *
+ * 2006 by Hans Verkuil (hverkuil@xs4all.nl)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#ifndef _UPD64031A_H_
+#define _UPD64031A_H_
+
+/* Ghost reduction modes */
+#define UPD64031A_GR_ON 	0
+#define UPD64031A_GR_OFF 	1
+#define UPD64031A_GR_THROUGH 	3
+
+/* Direct 3D/YCS Connection */
+#define UPD64031A_3DYCS_DISABLE   (0 << 2)
+#define UPD64031A_3DYCS_COMPOSITE (2 << 2)
+#define UPD64031A_3DYCS_SVIDEO    (3 << 2)
+
+/* Composite sync digital separation circuit */
+#define UPD64031A_COMPOSITE_EXTERNAL (1 << 4)
+
+/* Vertical sync digital separation circuit */
+#define UPD64031A_VERTICAL_EXTERNAL (1 << 5)
+
+#endif
diff --git a/include/media/upd64083.h b/include/media/upd64083.h
new file mode 100644
index 00000000..59b6f32b
--- /dev/null
+++ b/include/media/upd64083.h
@@ -0,0 +1,58 @@
+/*
+ * upd6408x - NEC Electronics 3-Dimensional Y/C separation input defines
+ *
+ * 2006 by Hans Verkuil (hverkuil@xs4all.nl)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#ifndef _UPD64083_H_
+#define _UPD64083_H_
+
+/* There are two bits of information that the driver needs in order
+   to select the correct routing: the operating mode and the selection
+   of the Y input (external or internal).
+
+   The first two operating modes expect a composite signal on the Y input,
+   the second two operating modes use both the Y and C inputs.
+
+   Normally YCS_MODE is used for tuner and composite inputs, and the
+   YCNR mode is used for S-Video inputs.
+
+   The external Y-ADC is selected when the composite input comes from a
+   upd64031a ghost reduction device. If this device is not present, or
+   the input is a S-Video signal, then the internal Y-ADC input should
+   be used. */
+
+/* Operating modes: */
+
+/* YCS mode: Y/C separation (burst locked clocking) */
+#define UPD64083_YCS_MODE      0
+/* YCS+ mode: 2D Y/C separation and YCNR (burst locked clocking) */
+#define UPD64083_YCS_PLUS_MODE 1
+
+/* Note: the following two modes cannot be used in combination with the
+   external Y-ADC. */
+/* MNNR mode: frame comb type YNR+C delay (line locked clocking) */
+#define UPD64083_MNNR_MODE     2
+/* YCNR mode: frame recursive YCNR (burst locked clocking) */
+#define UPD64083_YCNR_MODE     3
+
+/* Select external Y-ADC: this should be set if this device is used in
+   combination with the upd64031a ghost reduction device.
+   Otherwise leave at 0 (use internal Y-ADC). */
+#define UPD64083_EXT_Y_ADC     (1 << 2)
+
+#endif
diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h
new file mode 100644
index 00000000..7395c815
--- /dev/null
+++ b/include/media/v4l2-chip-ident.h
@@ -0,0 +1,332 @@
+/*
+    v4l2 chip identifiers header
+
+    This header provides a list of chip identifiers that can be returned
+    through the VIDIOC_DBG_G_CHIP_IDENT ioctl.
+
+    Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef V4L2_CHIP_IDENT_H_
+#define V4L2_CHIP_IDENT_H_
+
+/* VIDIOC_DBG_G_CHIP_IDENT: identifies the actual chip installed on the board */
+
+/* KEEP THIS LIST ORDERED BY ID!
+   Otherwise it will be hard to see which ranges are already in use when
+   adding support to a new chip family. */
+enum {
+	/* general idents: reserved range 0-49 */
+	V4L2_IDENT_NONE      = 0,       /* No chip matched */
+	V4L2_IDENT_AMBIGUOUS = 1,       /* Match too general, multiple chips matched */
+	V4L2_IDENT_UNKNOWN   = 2,       /* Chip found, but cannot identify */
+
+	/* module tvaudio: reserved range 50-99 */
+	V4L2_IDENT_TVAUDIO = 50,	/* A tvaudio chip, unknown which it is exactly */
+
+	/* Sony IMX074 */
+	V4L2_IDENT_IMX074 = 74,
+
+	/* module saa7110: just ident 100 */
+	V4L2_IDENT_SAA7110 = 100,
+
+	/* module saa7115: reserved range 101-149 */
+	V4L2_IDENT_SAA7111 = 101,
+	V4L2_IDENT_SAA7111A = 102,
+	V4L2_IDENT_SAA7113 = 103,
+	V4L2_IDENT_SAA7114 = 104,
+	V4L2_IDENT_SAA7115 = 105,
+	V4L2_IDENT_SAA7118 = 108,
+
+	/* module saa7127: reserved range 150-199 */
+	V4L2_IDENT_SAA7127 = 157,
+	V4L2_IDENT_SAA7129 = 159,
+
+	/* module cx25840: reserved range 200-249 */
+	V4L2_IDENT_CX25836 = 236,
+	V4L2_IDENT_CX25837 = 237,
+	V4L2_IDENT_CX25840 = 240,
+	V4L2_IDENT_CX25841 = 241,
+	V4L2_IDENT_CX25842 = 242,
+	V4L2_IDENT_CX25843 = 243,
+
+	/* OmniVision sensors: reserved range 250-299 */
+	V4L2_IDENT_OV7670 = 250,
+	V4L2_IDENT_OV7720 = 251,
+	V4L2_IDENT_OV7725 = 252,
+	V4L2_IDENT_OV7660 = 253,
+	V4L2_IDENT_OV9650 = 254,
+	V4L2_IDENT_OV9655 = 255,
+	V4L2_IDENT_SOI968 = 256,
+	V4L2_IDENT_OV9640 = 257,
+	V4L2_IDENT_OV6650 = 258,
+	V4L2_IDENT_OV2640 = 259,
+	V4L2_IDENT_OV9740 = 260,
+	V4L2_IDENT_OV5642 = 261,
+
+	/* module saa7146: reserved range 300-309 */
+	V4L2_IDENT_SAA7146 = 300,
+
+	/* Conexant MPEG encoder/decoders: reserved range 400-420 */
+	V4L2_IDENT_CX23418_843 = 403, /* Integrated A/V Decoder on the '418 */
+	V4L2_IDENT_CX23415 = 415,
+	V4L2_IDENT_CX23416 = 416,
+	V4L2_IDENT_CX23417 = 417,
+	V4L2_IDENT_CX23418 = 418,
+
+	/* module bt819: reserved range 810-819 */
+	V4L2_IDENT_BT815A = 815,
+	V4L2_IDENT_BT817A = 817,
+	V4L2_IDENT_BT819A = 819,
+
+	/* module au0828 */
+	V4L2_IDENT_AU0828 = 828,
+
+	/* module bt856: just ident 856 */
+	V4L2_IDENT_BT856 = 856,
+
+	/* module bt866: just ident 866 */
+	V4L2_IDENT_BT866 = 866,
+
+	/* module ks0127: reserved range 1120-1129 */
+	V4L2_IDENT_KS0122S = 1122,
+	V4L2_IDENT_KS0127  = 1127,
+	V4L2_IDENT_KS0127B = 1128,
+
+	/* module indycam: just ident 2000 */
+	V4L2_IDENT_INDYCAM = 2000,
+
+	/* module vp27smpx: just ident 2700 */
+	V4L2_IDENT_VP27SMPX = 2700,
+
+	/* module vpx3220: reserved range: 3210-3229 */
+	V4L2_IDENT_VPX3214C = 3214,
+	V4L2_IDENT_VPX3216B = 3216,
+	V4L2_IDENT_VPX3220A = 3220,
+
+	/* VX855 just ident 3409 */
+	/* Other via devs could use 3314, 3324, 3327, 3336, 3364, 3353 */
+	V4L2_IDENT_VIA_VX855 = 3409,
+
+	/* module tvp5150 */
+	V4L2_IDENT_TVP5150 = 5150,
+
+	/* module saa5246a: just ident 5246 */
+	V4L2_IDENT_SAA5246A = 5246,
+
+	/* module saa5249: just ident 5249 */
+	V4L2_IDENT_SAA5249 = 5249,
+
+	/* module cs5345: just ident 5345 */
+	V4L2_IDENT_CS5345 = 5345,
+
+	/* module tea6415c: just ident 6415 */
+	V4L2_IDENT_TEA6415C = 6415,
+
+	/* module tea6420: just ident 6420 */
+	V4L2_IDENT_TEA6420 = 6420,
+
+	/* module saa6588: just ident 6588 */
+	V4L2_IDENT_SAA6588 = 6588,
+
+	/* module vs6624: just ident 6624 */
+	V4L2_IDENT_VS6624 = 6624,
+
+	/* module saa6752hs: reserved range 6750-6759 */
+	V4L2_IDENT_SAA6752HS = 6752,
+	V4L2_IDENT_SAA6752HS_AC3 = 6753,
+
+	/* modules tef6862: just ident 6862 */
+	V4L2_IDENT_TEF6862 = 6862,
+
+	/* module tvp7002: just ident 7002 */
+	V4L2_IDENT_TVP7002 = 7002,
+
+	/* module adv7170: just ident 7170 */
+	V4L2_IDENT_ADV7170 = 7170,
+
+	/* module adv7175: just ident 7175 */
+	V4L2_IDENT_ADV7175 = 7175,
+
+	/* module adv7180: just ident 7180 */
+	V4L2_IDENT_ADV7180 = 7180,
+
+	/* module adv7183: just ident 7183 */
+	V4L2_IDENT_ADV7183 = 7183,
+
+	/* module saa7185: just ident 7185 */
+	V4L2_IDENT_SAA7185 = 7185,
+
+	/* module saa7191: just ident 7191 */
+	V4L2_IDENT_SAA7191 = 7191,
+
+	/* module ths7303: just ident 7303 */
+	V4L2_IDENT_THS7303 = 7303,
+
+	/* module adv7343: just ident 7343 */
+	V4L2_IDENT_ADV7343 = 7343,
+
+	/* module saa7706h: just ident 7706 */
+	V4L2_IDENT_SAA7706H = 7706,
+
+	/* module mt9v011, just ident 8243 */
+	V4L2_IDENT_MT9V011 = 8243,
+
+	/* module wm8739: just ident 8739 */
+	V4L2_IDENT_WM8739 = 8739,
+
+	/* module wm8775: just ident 8775 */
+	V4L2_IDENT_WM8775 = 8775,
+
+	/* Marvell controllers starting at 8801 */
+	V4L2_IDENT_CAFE = 8801,
+	V4L2_IDENT_ARMADA610 = 8802,
+
+	/* AKM AK8813/AK8814 */
+	V4L2_IDENT_AK8813 = 8813,
+	V4L2_IDENT_AK8814 = 8814,
+
+	/* module cx23885 and cx25840 */
+	V4L2_IDENT_CX23885    = 8850,
+	V4L2_IDENT_CX23885_AV = 8851, /* Integrated A/V decoder */
+	V4L2_IDENT_CX23887    = 8870,
+	V4L2_IDENT_CX23887_AV = 8871, /* Integrated A/V decoder */
+	V4L2_IDENT_CX23888    = 8880,
+	V4L2_IDENT_CX23888_AV = 8881, /* Integrated A/V decoder */
+	V4L2_IDENT_CX23888_IR = 8882, /* Integrated infrared controller */
+
+	/* module tda9840: just ident 9840 */
+	V4L2_IDENT_TDA9840 = 9840,
+
+	/* module tw9910: just ident 9910 */
+	V4L2_IDENT_TW9910 = 9910,
+
+	/* module sn9c20x: just ident 10000 */
+	V4L2_IDENT_SN9C20X = 10000,
+
+	/* module cx231xx and cx25840 */
+	V4L2_IDENT_CX2310X_AV = 23099, /* Integrated A/V decoder; not in '100 */
+	V4L2_IDENT_CX23100    = 23100,
+	V4L2_IDENT_CX23101    = 23101,
+	V4L2_IDENT_CX23102    = 23102,
+
+	/* module msp3400: reserved range 34000-34999 for msp34xx */
+	V4L2_IDENT_MSPX4XX  = 34000, /* generic MSPX4XX identifier, only
+					use internally (tveeprom.c). */
+
+	V4L2_IDENT_MSP3400B = 34002,
+	V4L2_IDENT_MSP3400C = 34003,
+	V4L2_IDENT_MSP3400D = 34004,
+	V4L2_IDENT_MSP3400G = 34007,
+	V4L2_IDENT_MSP3401G = 34017,
+	V4L2_IDENT_MSP3402G = 34027,
+	V4L2_IDENT_MSP3405D = 34054,
+	V4L2_IDENT_MSP3405G = 34057,
+	V4L2_IDENT_MSP3407D = 34074,
+	V4L2_IDENT_MSP3407G = 34077,
+
+	V4L2_IDENT_MSP3410B = 34102,
+	V4L2_IDENT_MSP3410C = 34103,
+	V4L2_IDENT_MSP3410D = 34104,
+	V4L2_IDENT_MSP3410G = 34107,
+	V4L2_IDENT_MSP3411G = 34117,
+	V4L2_IDENT_MSP3412G = 34127,
+	V4L2_IDENT_MSP3415D = 34154,
+	V4L2_IDENT_MSP3415G = 34157,
+	V4L2_IDENT_MSP3417D = 34174,
+	V4L2_IDENT_MSP3417G = 34177,
+
+	V4L2_IDENT_MSP3420G = 34207,
+	V4L2_IDENT_MSP3421G = 34217,
+	V4L2_IDENT_MSP3422G = 34227,
+	V4L2_IDENT_MSP3425G = 34257,
+	V4L2_IDENT_MSP3427G = 34277,
+
+	V4L2_IDENT_MSP3430G = 34307,
+	V4L2_IDENT_MSP3431G = 34317,
+	V4L2_IDENT_MSP3435G = 34357,
+	V4L2_IDENT_MSP3437G = 34377,
+
+	V4L2_IDENT_MSP3440G = 34407,
+	V4L2_IDENT_MSP3441G = 34417,
+	V4L2_IDENT_MSP3442G = 34427,
+	V4L2_IDENT_MSP3445G = 34457,
+	V4L2_IDENT_MSP3447G = 34477,
+
+	V4L2_IDENT_MSP3450G = 34507,
+	V4L2_IDENT_MSP3451G = 34517,
+	V4L2_IDENT_MSP3452G = 34527,
+	V4L2_IDENT_MSP3455G = 34557,
+	V4L2_IDENT_MSP3457G = 34577,
+
+	V4L2_IDENT_MSP3460G = 34607,
+	V4L2_IDENT_MSP3461G = 34617,
+	V4L2_IDENT_MSP3465G = 34657,
+	V4L2_IDENT_MSP3467G = 34677,
+
+	/* module msp3400: reserved range 44000-44999 for msp44xx */
+	V4L2_IDENT_MSP4400G = 44007,
+	V4L2_IDENT_MSP4408G = 44087,
+	V4L2_IDENT_MSP4410G = 44107,
+	V4L2_IDENT_MSP4418G = 44187,
+	V4L2_IDENT_MSP4420G = 44207,
+	V4L2_IDENT_MSP4428G = 44287,
+	V4L2_IDENT_MSP4440G = 44407,
+	V4L2_IDENT_MSP4448G = 44487,
+	V4L2_IDENT_MSP4450G = 44507,
+	V4L2_IDENT_MSP4458G = 44587,
+
+	/* Micron CMOS sensor chips: 45000-45099 */
+	V4L2_IDENT_MT9M001C12ST		= 45000,
+	V4L2_IDENT_MT9M001C12STM	= 45005,
+	V4L2_IDENT_MT9M111		= 45007,
+	V4L2_IDENT_MT9M112		= 45008,
+	V4L2_IDENT_MT9V022IX7ATC	= 45010, /* No way to detect "normal" I77ATx */
+	V4L2_IDENT_MT9V022IX7ATM	= 45015, /* and "lead free" IA7ATx chips */
+	V4L2_IDENT_MT9T031		= 45020,
+	V4L2_IDENT_MT9T111		= 45021,
+	V4L2_IDENT_MT9T112		= 45022,
+	V4L2_IDENT_MT9V111		= 45031,
+	V4L2_IDENT_MT9V112		= 45032,
+
+	/* HV7131R CMOS sensor: just ident 46000 */
+	V4L2_IDENT_HV7131R		= 46000,
+
+	/* Sharp RJ54N1CB0C, 0xCB0C = 51980 */
+	V4L2_IDENT_RJ54N1CB0C = 51980,
+
+	/* module m52790: just ident 52790 */
+	V4L2_IDENT_M52790 = 52790,
+
+	/* module cs53132a: just ident 53132 */
+	V4L2_IDENT_CS53l32A = 53132,
+
+	/* modules upd61151 MPEG2 encoder: just ident 54000 */
+	V4L2_IDENT_UPD61161 = 54000,
+	/* modules upd61152 MPEG2 encoder with AC3: just ident 54001 */
+	V4L2_IDENT_UPD61162 = 54001,
+
+	/* module upd64031a: just ident 64031 */
+	V4L2_IDENT_UPD64031A = 64031,
+
+	/* module upd64083: just ident 64083 */
+	V4L2_IDENT_UPD64083 = 64083,
+
+	/* Don't just add new IDs at the end: KEEP THIS LIST ORDERED BY ID! */
+};
+
+#endif
diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
new file mode 100644
index 00000000..a298ec49
--- /dev/null
+++ b/include/media/v4l2-common.h
@@ -0,0 +1,215 @@
+/*
+    v4l2 common internal API header
+
+    This header contains internal shared ioctl definitions for use by the
+    internal low-level v4l2 drivers.
+    Each ioctl begins with VIDIOC_INT_ to clearly mark that it is an internal
+    define,
+
+    Copyright (C) 2005  Hans Verkuil <hverkuil@xs4all.nl>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef V4L2_COMMON_H_
+#define V4L2_COMMON_H_
+
+#include <media/v4l2-dev.h>
+
+/* Common printk constucts for v4l-i2c drivers. These macros create a unique
+   prefix consisting of the driver name, the adapter number and the i2c
+   address. */
+#define v4l_printk(level, name, adapter, addr, fmt, arg...) \
+	printk(level "%s %d-%04x: " fmt, name, i2c_adapter_id(adapter), addr , ## arg)
+
+#define v4l_client_printk(level, client, fmt, arg...)			    \
+	v4l_printk(level, (client)->driver->driver.name, (client)->adapter, \
+		   (client)->addr, fmt , ## arg)
+
+#define v4l_err(client, fmt, arg...) \
+	v4l_client_printk(KERN_ERR, client, fmt , ## arg)
+
+#define v4l_warn(client, fmt, arg...) \
+	v4l_client_printk(KERN_WARNING, client, fmt , ## arg)
+
+#define v4l_info(client, fmt, arg...) \
+	v4l_client_printk(KERN_INFO, client, fmt , ## arg)
+
+/* These three macros assume that the debug level is set with a module
+   parameter called 'debug'. */
+#define v4l_dbg(level, debug, client, fmt, arg...)			     \
+	do { 								     \
+		if (debug >= (level))					     \
+			v4l_client_printk(KERN_DEBUG, client, fmt , ## arg); \
+	} while (0)
+
+/* ------------------------------------------------------------------------- */
+
+/* These printk constructs can be used with v4l2_device and v4l2_subdev */
+#define v4l2_printk(level, dev, fmt, arg...) \
+	printk(level "%s: " fmt, (dev)->name , ## arg)
+
+#define v4l2_err(dev, fmt, arg...) \
+	v4l2_printk(KERN_ERR, dev, fmt , ## arg)
+
+#define v4l2_warn(dev, fmt, arg...) \
+	v4l2_printk(KERN_WARNING, dev, fmt , ## arg)
+
+#define v4l2_info(dev, fmt, arg...) \
+	v4l2_printk(KERN_INFO, dev, fmt , ## arg)
+
+/* These three macros assume that the debug level is set with a module
+   parameter called 'debug'. */
+#define v4l2_dbg(level, debug, dev, fmt, arg...)			\
+	do { 								\
+		if (debug >= (level))					\
+			v4l2_printk(KERN_DEBUG, dev, fmt , ## arg); 	\
+	} while (0)
+
+/* ------------------------------------------------------------------------- */
+
+/* Control helper functions */
+
+int v4l2_ctrl_check(struct v4l2_ext_control *ctrl, struct v4l2_queryctrl *qctrl,
+		const char * const *menu_items);
+const char *v4l2_ctrl_get_name(u32 id);
+const char * const *v4l2_ctrl_get_menu(u32 id);
+int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, s32 min, s32 max, s32 step, s32 def);
+int v4l2_ctrl_query_menu(struct v4l2_querymenu *qmenu,
+		struct v4l2_queryctrl *qctrl, const char * const *menu_items);
+#define V4L2_CTRL_MENU_IDS_END (0xffffffff)
+int v4l2_ctrl_query_menu_valid_items(struct v4l2_querymenu *qmenu, const u32 *ids);
+
+/* Note: ctrl_classes points to an array of u32 pointers. Each u32 array is a
+   0-terminated array of control IDs. Each array must be sorted low to high
+   and belong to the same control class. The array of u32 pointers must also
+   be sorted, from low class IDs to high class IDs. */
+u32 v4l2_ctrl_next(const u32 * const *ctrl_classes, u32 id);
+
+/* ------------------------------------------------------------------------- */
+
+/* Register/chip ident helper function */
+
+struct i2c_client; /* forward reference */
+int v4l2_chip_match_i2c_client(struct i2c_client *c, const struct v4l2_dbg_match *match);
+int v4l2_chip_ident_i2c_client(struct i2c_client *c, struct v4l2_dbg_chip_ident *chip,
+		u32 ident, u32 revision);
+int v4l2_chip_match_host(const struct v4l2_dbg_match *match);
+
+/* ------------------------------------------------------------------------- */
+
+/* I2C Helper functions */
+
+struct i2c_driver;
+struct i2c_adapter;
+struct i2c_client;
+struct i2c_device_id;
+struct v4l2_device;
+struct v4l2_subdev;
+struct v4l2_subdev_ops;
+
+
+/* Load an i2c module and return an initialized v4l2_subdev struct.
+   The client_type argument is the name of the chip that's on the adapter. */
+struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev,
+		struct i2c_adapter *adapter, const char *client_type,
+		u8 addr, const unsigned short *probe_addrs);
+
+struct i2c_board_info;
+
+struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev,
+		struct i2c_adapter *adapter, struct i2c_board_info *info,
+		const unsigned short *probe_addrs);
+
+/* Initialize an v4l2_subdev with data from an i2c_client struct */
+void v4l2_i2c_subdev_init(struct v4l2_subdev *sd, struct i2c_client *client,
+		const struct v4l2_subdev_ops *ops);
+/* Return i2c client address of v4l2_subdev. */
+unsigned short v4l2_i2c_subdev_addr(struct v4l2_subdev *sd);
+
+enum v4l2_i2c_tuner_type {
+	ADDRS_RADIO,	/* Radio tuner addresses */
+	ADDRS_DEMOD,	/* Demod tuner addresses */
+	ADDRS_TV,	/* TV tuner addresses */
+	/* TV tuner addresses if demod is present, this excludes
+	   addresses used by the demodulator from the list of
+	   candidates. */
+	ADDRS_TV_WITH_DEMOD,
+};
+/* Return a list of I2C tuner addresses to probe. Use only if the tuner
+   addresses are unknown. */
+const unsigned short *v4l2_i2c_tuner_addrs(enum v4l2_i2c_tuner_type type);
+
+/* ------------------------------------------------------------------------- */
+
+/* SPI Helper functions */
+#if defined(CONFIG_SPI)
+
+#include <linux/spi/spi.h>
+
+struct spi_device;
+
+/* Load an spi module and return an initialized v4l2_subdev struct.
+   The client_type argument is the name of the chip that's on the adapter. */
+struct v4l2_subdev *v4l2_spi_new_subdev(struct v4l2_device *v4l2_dev,
+		struct spi_master *master, struct spi_board_info *info);
+
+/* Initialize an v4l2_subdev with data from an spi_device struct */
+void v4l2_spi_subdev_init(struct v4l2_subdev *sd, struct spi_device *spi,
+		const struct v4l2_subdev_ops *ops);
+#endif
+
+/* ------------------------------------------------------------------------- */
+
+/* Note: these remaining ioctls/structs should be removed as well, but they are
+   still used in tuner-simple.c (TUNER_SET_CONFIG), cx18/ivtv (RESET) and
+   v4l2-int-device.h (v4l2_routing). To remove these ioctls some more cleanup
+   is needed in those modules. */
+
+/* s_config */
+struct v4l2_priv_tun_config {
+	int tuner;
+	void *priv;
+};
+#define TUNER_SET_CONFIG           _IOW('d', 92, struct v4l2_priv_tun_config)
+
+#define VIDIOC_INT_RESET            	_IOW ('d', 102, u32)
+
+struct v4l2_routing {
+	u32 input;
+	u32 output;
+};
+
+/* ------------------------------------------------------------------------- */
+
+/* Miscellaneous helper functions */
+
+void v4l_bound_align_image(unsigned int *w, unsigned int wmin,
+			   unsigned int wmax, unsigned int walign,
+			   unsigned int *h, unsigned int hmin,
+			   unsigned int hmax, unsigned int halign,
+			   unsigned int salign);
+int v4l_fill_dv_preset_info(u32 preset, struct v4l2_dv_enum_preset *info);
+
+struct v4l2_discrete_probe {
+	const struct v4l2_frmsize_discrete	*sizes;
+	int					num_sizes;
+};
+
+const struct v4l2_frmsize_discrete *v4l2_find_nearest_format(
+		const struct v4l2_discrete_probe *probe,
+		s32 width, s32 height);
+
+#endif /* V4L2_COMMON_H_ */
diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
new file mode 100644
index 00000000..11e67562
--- /dev/null
+++ b/include/media/v4l2-ctrls.h
@@ -0,0 +1,528 @@
+/*
+    V4L2 controls support header.
+
+    Copyright (C) 2010  Hans Verkuil <hverkuil@xs4all.nl>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _V4L2_CTRLS_H
+#define _V4L2_CTRLS_H
+
+#include <linux/list.h>
+#include <linux/videodev2.h>
+
+/* forward references */
+struct v4l2_ctrl_handler;
+struct v4l2_ctrl_helper;
+struct v4l2_ctrl;
+struct video_device;
+struct v4l2_subdev;
+struct v4l2_subscribed_event;
+struct v4l2_fh;
+struct poll_table_struct;
+
+/** struct v4l2_ctrl_ops - The control operations that the driver has to provide.
+  * @g_volatile_ctrl: Get a new value for this control. Generally only relevant
+  *		for volatile (and usually read-only) controls such as a control
+  *		that returns the current signal strength which changes
+  *		continuously.
+  *		If not set, then the currently cached value will be returned.
+  * @try_ctrl:	Test whether the control's value is valid. Only relevant when
+  *		the usual min/max/step checks are not sufficient.
+  * @s_ctrl:	Actually set the new control value. s_ctrl is compulsory. The
+  *		ctrl->handler->lock is held when these ops are called, so no
+  *		one else can access controls owned by that handler.
+  */
+struct v4l2_ctrl_ops {
+	int (*g_volatile_ctrl)(struct v4l2_ctrl *ctrl);
+	int (*try_ctrl)(struct v4l2_ctrl *ctrl);
+	int (*s_ctrl)(struct v4l2_ctrl *ctrl);
+};
+
+/** struct v4l2_ctrl - The control structure.
+  * @node:	The list node.
+  * @ev_subs:	The list of control event subscriptions.
+  * @handler:	The handler that owns the control.
+  * @cluster:	Point to start of cluster array.
+  * @ncontrols:	Number of controls in cluster array.
+  * @done:	Internal flag: set for each processed control.
+  * @is_new:	Set when the user specified a new value for this control. It
+  *		is also set when called from v4l2_ctrl_handler_setup. Drivers
+  *		should never set this flag.
+  * @is_private: If set, then this control is private to its handler and it
+  *		will not be added to any other handlers. Drivers can set
+  *		this flag.
+  * @is_auto:   If set, then this control selects whether the other cluster
+  *		members are in 'automatic' mode or 'manual' mode. This is
+  *		used for autogain/gain type clusters. Drivers should never
+  *		set this flag directly.
+  * @has_volatiles: If set, then one or more members of the cluster are volatile.
+  *		Drivers should never touch this flag.
+  * @manual_mode_value: If the is_auto flag is set, then this is the value
+  *		of the auto control that determines if that control is in
+  *		manual mode. So if the value of the auto control equals this
+  *		value, then the whole cluster is in manual mode. Drivers should
+  *		never set this flag directly.
+  * @ops:	The control ops.
+  * @id:	The control ID.
+  * @name:	The control name.
+  * @type:	The control type.
+  * @minimum:	The control's minimum value.
+  * @maximum:	The control's maximum value.
+  * @default_value: The control's default value.
+  * @step:	The control's step value for non-menu controls.
+  * @menu_skip_mask: The control's skip mask for menu controls. This makes it
+  *		easy to skip menu items that are not valid. If bit X is set,
+  *		then menu item X is skipped. Of course, this only works for
+  *		menus with <= 32 menu items. There are no menus that come
+  *		close to that number, so this is OK. Should we ever need more,
+  *		then this will have to be extended to a u64 or a bit array.
+  * @qmenu:	A const char * array for all menu items. Array entries that are
+  *		empty strings ("") correspond to non-existing menu items (this
+  *		is in addition to the menu_skip_mask above). The last entry
+  *		must be NULL.
+  * @flags:	The control's flags.
+  * @cur:	The control's current value.
+  * @val:	The control's new s32 value.
+  * @val64:	The control's new s64 value.
+  * @string:	The control's new string value.
+  * @priv:	The control's private pointer. For use by the driver. It is
+  *		untouched by the control framework. Note that this pointer is
+  *		not freed when the control is deleted. Should this be needed
+  *		then a new internal bitfield can be added to tell the framework
+  *		to free this pointer.
+  */
+struct v4l2_ctrl {
+	/* Administrative fields */
+	struct list_head node;
+	struct list_head ev_subs;
+	struct v4l2_ctrl_handler *handler;
+	struct v4l2_ctrl **cluster;
+	unsigned ncontrols;
+	unsigned int done:1;
+
+	unsigned int is_new:1;
+	unsigned int is_private:1;
+	unsigned int is_auto:1;
+	unsigned int has_volatiles:1;
+	unsigned int manual_mode_value:8;
+
+	const struct v4l2_ctrl_ops *ops;
+	u32 id;
+	const char *name;
+	enum v4l2_ctrl_type type;
+	s32 minimum, maximum, default_value;
+	union {
+		u32 step;
+		u32 menu_skip_mask;
+	};
+	const char * const *qmenu;
+	unsigned long flags;
+	union {
+		s32 val;
+		s64 val64;
+		char *string;
+	} cur;
+	union {
+		s32 val;
+		s64 val64;
+		char *string;
+	};
+	void *priv;
+};
+
+/** struct v4l2_ctrl_ref - The control reference.
+  * @node:	List node for the sorted list.
+  * @next:	Single-link list node for the hash.
+  * @ctrl:	The actual control information.
+  * @helper:	Pointer to helper struct. Used internally in prepare_ext_ctrls().
+  *
+  * Each control handler has a list of these refs. The list_head is used to
+  * keep a sorted-by-control-ID list of all controls, while the next pointer
+  * is used to link the control in the hash's bucket.
+  */
+struct v4l2_ctrl_ref {
+	struct list_head node;
+	struct v4l2_ctrl_ref *next;
+	struct v4l2_ctrl *ctrl;
+	struct v4l2_ctrl_helper *helper;
+};
+
+/** struct v4l2_ctrl_handler - The control handler keeps track of all the
+  * controls: both the controls owned by the handler and those inherited
+  * from other handlers.
+  * @lock:	Lock to control access to this handler and its controls.
+  * @ctrls:	The list of controls owned by this handler.
+  * @ctrl_refs:	The list of control references.
+  * @cached:	The last found control reference. It is common that the same
+  *		control is needed multiple times, so this is a simple
+  *		optimization.
+  * @buckets:	Buckets for the hashing. Allows for quick control lookup.
+  * @nr_of_buckets: Total number of buckets in the array.
+  * @error:	The error code of the first failed control addition.
+  */
+struct v4l2_ctrl_handler {
+	struct mutex lock;
+	struct list_head ctrls;
+	struct list_head ctrl_refs;
+	struct v4l2_ctrl_ref *cached;
+	struct v4l2_ctrl_ref **buckets;
+	u16 nr_of_buckets;
+	int error;
+};
+
+/** struct v4l2_ctrl_config - Control configuration structure.
+  * @ops:	The control ops.
+  * @id:	The control ID.
+  * @name:	The control name.
+  * @type:	The control type.
+  * @min:	The control's minimum value.
+  * @max:	The control's maximum value.
+  * @step:	The control's step value for non-menu controls.
+  * @def: 	The control's default value.
+  * @flags:	The control's flags.
+  * @menu_skip_mask: The control's skip mask for menu controls. This makes it
+  *		easy to skip menu items that are not valid. If bit X is set,
+  *		then menu item X is skipped. Of course, this only works for
+  *		menus with <= 32 menu items. There are no menus that come
+  *		close to that number, so this is OK. Should we ever need more,
+  *		then this will have to be extended to a u64 or a bit array.
+  * @qmenu:	A const char * array for all menu items. Array entries that are
+  *		empty strings ("") correspond to non-existing menu items (this
+  *		is in addition to the menu_skip_mask above). The last entry
+  *		must be NULL.
+  * @is_private: If set, then this control is private to its handler and it
+  *		will not be added to any other handlers.
+  */
+struct v4l2_ctrl_config {
+	const struct v4l2_ctrl_ops *ops;
+	u32 id;
+	const char *name;
+	enum v4l2_ctrl_type type;
+	s32 min;
+	s32 max;
+	u32 step;
+	s32 def;
+	u32 flags;
+	u32 menu_skip_mask;
+	const char * const *qmenu;
+	unsigned int is_private:1;
+};
+
+/** v4l2_ctrl_fill() - Fill in the control fields based on the control ID.
+  *
+  * This works for all standard V4L2 controls.
+  * For non-standard controls it will only fill in the given arguments
+  * and @name will be NULL.
+  *
+  * This function will overwrite the contents of @name, @type and @flags.
+  * The contents of @min, @max, @step and @def may be modified depending on
+  * the type.
+  *
+  * Do not use in drivers! It is used internally for backwards compatibility
+  * control handling only. Once all drivers are converted to use the new
+  * control framework this function will no longer be exported.
+  */
+void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
+		    s32 *min, s32 *max, s32 *step, s32 *def, u32 *flags);
+
+
+/** v4l2_ctrl_handler_init() - Initialize the control handler.
+  * @hdl:	The control handler.
+  * @nr_of_controls_hint: A hint of how many controls this handler is
+  *		expected to refer to. This is the total number, so including
+  *		any inherited controls. It doesn't have to be precise, but if
+  *		it is way off, then you either waste memory (too many buckets
+  *		are allocated) or the control lookup becomes slower (not enough
+  *		buckets are allocated, so there are more slow list lookups).
+  *		It will always work, though.
+  *
+  * Returns an error if the buckets could not be allocated. This error will
+  * also be stored in @hdl->error.
+  */
+int v4l2_ctrl_handler_init(struct v4l2_ctrl_handler *hdl,
+			   unsigned nr_of_controls_hint);
+
+/** v4l2_ctrl_handler_free() - Free all controls owned by the handler and free
+  * the control list.
+  * @hdl:	The control handler.
+  *
+  * Does nothing if @hdl == NULL.
+  */
+void v4l2_ctrl_handler_free(struct v4l2_ctrl_handler *hdl);
+
+/** v4l2_ctrl_handler_setup() - Call the s_ctrl op for all controls belonging
+  * to the handler to initialize the hardware to the current control values.
+  * @hdl:	The control handler.
+  *
+  * Button controls will be skipped, as are read-only controls.
+  *
+  * If @hdl == NULL, then this just returns 0.
+  */
+int v4l2_ctrl_handler_setup(struct v4l2_ctrl_handler *hdl);
+
+/** v4l2_ctrl_handler_log_status() - Log all controls owned by the handler.
+  * @hdl:	The control handler.
+  * @prefix:	The prefix to use when logging the control values. If the
+  *		prefix does not end with a space, then ": " will be added
+  *		after the prefix. If @prefix == NULL, then no prefix will be
+  *		used.
+  *
+  * For use with VIDIOC_LOG_STATUS.
+  *
+  * Does nothing if @hdl == NULL.
+  */
+void v4l2_ctrl_handler_log_status(struct v4l2_ctrl_handler *hdl,
+				  const char *prefix);
+
+/** v4l2_ctrl_new_custom() - Allocate and initialize a new custom V4L2
+  * control.
+  * @hdl:	The control handler.
+  * @cfg:	The control's configuration data.
+  * @priv:	The control's driver-specific private data.
+  *
+  * If the &v4l2_ctrl struct could not be allocated then NULL is returned
+  * and @hdl->error is set to the error code (if it wasn't set already).
+  */
+struct v4l2_ctrl *v4l2_ctrl_new_custom(struct v4l2_ctrl_handler *hdl,
+			const struct v4l2_ctrl_config *cfg, void *priv);
+
+/** v4l2_ctrl_new_std() - Allocate and initialize a new standard V4L2 non-menu control.
+  * @hdl:	The control handler.
+  * @ops:	The control ops.
+  * @id:	The control ID.
+  * @min:	The control's minimum value.
+  * @max:	The control's maximum value.
+  * @step:	The control's step value
+  * @def: 	The control's default value.
+  *
+  * If the &v4l2_ctrl struct could not be allocated, or the control
+  * ID is not known, then NULL is returned and @hdl->error is set to the
+  * appropriate error code (if it wasn't set already).
+  *
+  * If @id refers to a menu control, then this function will return NULL.
+  *
+  * Use v4l2_ctrl_new_std_menu() when adding menu controls.
+  */
+struct v4l2_ctrl *v4l2_ctrl_new_std(struct v4l2_ctrl_handler *hdl,
+			const struct v4l2_ctrl_ops *ops,
+			u32 id, s32 min, s32 max, u32 step, s32 def);
+
+/** v4l2_ctrl_new_std_menu() - Allocate and initialize a new standard V4L2 menu control.
+  * @hdl:	The control handler.
+  * @ops:	The control ops.
+  * @id:	The control ID.
+  * @max:	The control's maximum value.
+  * @mask: 	The control's skip mask for menu controls. This makes it
+  *		easy to skip menu items that are not valid. If bit X is set,
+  *		then menu item X is skipped. Of course, this only works for
+  *		menus with <= 32 menu items. There are no menus that come
+  *		close to that number, so this is OK. Should we ever need more,
+  *		then this will have to be extended to a u64 or a bit array.
+  * @def: 	The control's default value.
+  *
+  * Same as v4l2_ctrl_new_std(), but @min is set to 0 and the @mask value
+  * determines which menu items are to be skipped.
+  *
+  * If @id refers to a non-menu control, then this function will return NULL.
+  */
+struct v4l2_ctrl *v4l2_ctrl_new_std_menu(struct v4l2_ctrl_handler *hdl,
+			const struct v4l2_ctrl_ops *ops,
+			u32 id, s32 max, s32 mask, s32 def);
+
+/** v4l2_ctrl_add_ctrl() - Add a control from another handler to this handler.
+  * @hdl:	The control handler.
+  * @ctrl:	The control to add.
+  *
+  * It will return NULL if it was unable to add the control reference.
+  * If the control already belonged to the handler, then it will do
+  * nothing and just return @ctrl.
+  */
+struct v4l2_ctrl *v4l2_ctrl_add_ctrl(struct v4l2_ctrl_handler *hdl,
+					  struct v4l2_ctrl *ctrl);
+
+/** v4l2_ctrl_add_handler() - Add all controls from handler @add to
+  * handler @hdl.
+  * @hdl:	The control handler.
+  * @add:	The control handler whose controls you want to add to
+  *		the @hdl control handler.
+  *
+  * Does nothing if either of the two is a NULL pointer.
+  * In case of an error @hdl->error will be set to the error code (if it
+  * wasn't set already).
+  */
+int v4l2_ctrl_add_handler(struct v4l2_ctrl_handler *hdl,
+			  struct v4l2_ctrl_handler *add);
+
+
+/** v4l2_ctrl_cluster() - Mark all controls in the cluster as belonging to that cluster.
+  * @ncontrols:	The number of controls in this cluster.
+  * @controls: 	The cluster control array of size @ncontrols.
+  */
+void v4l2_ctrl_cluster(unsigned ncontrols, struct v4l2_ctrl **controls);
+
+
+/** v4l2_ctrl_auto_cluster() - Mark all controls in the cluster as belonging to
+  * that cluster and set it up for autofoo/foo-type handling.
+  * @ncontrols:	The number of controls in this cluster.
+  * @controls:	The cluster control array of size @ncontrols. The first control
+  *		must be the 'auto' control (e.g. autogain, autoexposure, etc.)
+  * @manual_val: The value for the first control in the cluster that equals the
+  *		manual setting.
+  * @set_volatile: If true, then all controls except the first auto control will
+  *		be volatile.
+  *
+  * Use for control groups where one control selects some automatic feature and
+  * the other controls are only active whenever the automatic feature is turned
+  * off (manual mode). Typical examples: autogain vs gain, auto-whitebalance vs
+  * red and blue balance, etc.
+  *
+  * The behavior of such controls is as follows:
+  *
+  * When the autofoo control is set to automatic, then any manual controls
+  * are set to inactive and any reads will call g_volatile_ctrl (if the control
+  * was marked volatile).
+  *
+  * When the autofoo control is set to manual, then any manual controls will
+  * be marked active, and any reads will just return the current value without
+  * going through g_volatile_ctrl.
+  *
+  * In addition, this function will set the V4L2_CTRL_FLAG_UPDATE flag
+  * on the autofoo control and V4L2_CTRL_FLAG_INACTIVE on the foo control(s)
+  * if autofoo is in auto mode.
+  */
+void v4l2_ctrl_auto_cluster(unsigned ncontrols, struct v4l2_ctrl **controls,
+			u8 manual_val, bool set_volatile);
+
+
+/** v4l2_ctrl_find() - Find a control with the given ID.
+  * @hdl:	The control handler.
+  * @id:	The control ID to find.
+  *
+  * If @hdl == NULL this will return NULL as well. Will lock the handler so
+  * do not use from inside &v4l2_ctrl_ops.
+  */
+struct v4l2_ctrl *v4l2_ctrl_find(struct v4l2_ctrl_handler *hdl, u32 id);
+
+/** v4l2_ctrl_activate() - Make the control active or inactive.
+  * @ctrl:	The control to (de)activate.
+  * @active:	True if the control should become active.
+  *
+  * This sets or clears the V4L2_CTRL_FLAG_INACTIVE flag atomically.
+  * Does nothing if @ctrl == NULL.
+  * This will usually be called from within the s_ctrl op.
+  * The V4L2_EVENT_CTRL event will be generated afterwards.
+  *
+  * This function assumes that the control handler is locked.
+  */
+void v4l2_ctrl_activate(struct v4l2_ctrl *ctrl, bool active);
+
+/** v4l2_ctrl_grab() - Mark the control as grabbed or not grabbed.
+  * @ctrl:	The control to (de)activate.
+  * @grabbed:	True if the control should become grabbed.
+  *
+  * This sets or clears the V4L2_CTRL_FLAG_GRABBED flag atomically.
+  * Does nothing if @ctrl == NULL.
+  * The V4L2_EVENT_CTRL event will be generated afterwards.
+  * This will usually be called when starting or stopping streaming in the
+  * driver.
+  *
+  * This function assumes that the control handler is not locked and will
+  * take the lock itself.
+  */
+void v4l2_ctrl_grab(struct v4l2_ctrl *ctrl, bool grabbed);
+
+/** v4l2_ctrl_lock() - Helper function to lock the handler
+  * associated with the control.
+  * @ctrl:	The control to lock.
+  */
+static inline void v4l2_ctrl_lock(struct v4l2_ctrl *ctrl)
+{
+	mutex_lock(&ctrl->handler->lock);
+}
+
+/** v4l2_ctrl_lock() - Helper function to unlock the handler
+  * associated with the control.
+  * @ctrl:	The control to unlock.
+  */
+static inline void v4l2_ctrl_unlock(struct v4l2_ctrl *ctrl)
+{
+	mutex_unlock(&ctrl->handler->lock);
+}
+
+/** v4l2_ctrl_g_ctrl() - Helper function to get the control's value from within a driver.
+  * @ctrl:	The control.
+  *
+  * This returns the control's value safely by going through the control
+  * framework. This function will lock the control's handler, so it cannot be
+  * used from within the &v4l2_ctrl_ops functions.
+  *
+  * This function is for integer type controls only.
+  */
+s32 v4l2_ctrl_g_ctrl(struct v4l2_ctrl *ctrl);
+
+/** v4l2_ctrl_s_ctrl() - Helper function to set the control's value from within a driver.
+  * @ctrl:	The control.
+  * @val:	The new value.
+  *
+  * This set the control's new value safely by going through the control
+  * framework. This function will lock the control's handler, so it cannot be
+  * used from within the &v4l2_ctrl_ops functions.
+  *
+  * This function is for integer type controls only.
+  */
+int v4l2_ctrl_s_ctrl(struct v4l2_ctrl *ctrl, s32 val);
+
+/* Internal helper functions that deal with control events. */
+void v4l2_ctrl_add_event(struct v4l2_ctrl *ctrl,
+		struct v4l2_subscribed_event *sev);
+void v4l2_ctrl_del_event(struct v4l2_ctrl *ctrl,
+		struct v4l2_subscribed_event *sev);
+
+/* Can be used as a vidioc_log_status function that just dumps all controls
+   associated with the filehandle. */
+int v4l2_ctrl_log_status(struct file *file, void *fh);
+
+/* Can be used as a vidioc_subscribe_event function that just subscribes
+   control events. */
+int v4l2_ctrl_subscribe_event(struct v4l2_fh *fh,
+				struct v4l2_event_subscription *sub);
+
+/* Can be used as a poll function that just polls for control events. */
+unsigned int v4l2_ctrl_poll(struct file *file, struct poll_table_struct *wait);
+
+/* Helpers for ioctl_ops. If hdl == NULL then they will all return -EINVAL. */
+int v4l2_queryctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_queryctrl *qc);
+int v4l2_querymenu(struct v4l2_ctrl_handler *hdl, struct v4l2_querymenu *qm);
+int v4l2_g_ctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_control *ctrl);
+int v4l2_s_ctrl(struct v4l2_fh *fh, struct v4l2_ctrl_handler *hdl,
+						struct v4l2_control *ctrl);
+int v4l2_g_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *c);
+int v4l2_try_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *c);
+int v4l2_s_ext_ctrls(struct v4l2_fh *fh, struct v4l2_ctrl_handler *hdl,
+						struct v4l2_ext_controls *c);
+
+/* Helpers for subdevices. If the associated ctrl_handler == NULL then they
+   will all return -EINVAL. */
+int v4l2_subdev_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc);
+int v4l2_subdev_querymenu(struct v4l2_subdev *sd, struct v4l2_querymenu *qm);
+int v4l2_subdev_g_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs);
+int v4l2_subdev_try_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs);
+int v4l2_subdev_s_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs);
+int v4l2_subdev_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
+int v4l2_subdev_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
+
+#endif
diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h
new file mode 100644
index 00000000..96d22215
--- /dev/null
+++ b/include/media/v4l2-dev.h
@@ -0,0 +1,206 @@
+/*
+ *
+ *	V 4 L 2   D R I V E R   H E L P E R   A P I
+ *
+ * Moved from videodev2.h
+ *
+ *	Some commonly needed functions for drivers (v4l2-common.o module)
+ */
+#ifndef _V4L2_DEV_H
+#define _V4L2_DEV_H
+
+#include <linux/poll.h>
+#include <linux/fs.h>
+#include <linux/device.h>
+#include <linux/cdev.h>
+#include <linux/mutex.h>
+#include <linux/videodev2.h>
+
+#include <media/media-entity.h>
+
+#define VIDEO_MAJOR	81
+
+#define VFL_TYPE_GRABBER	0
+#define VFL_TYPE_VBI		1
+#define VFL_TYPE_RADIO		2
+#define VFL_TYPE_SUBDEV		3
+#define VFL_TYPE_MAX		4
+
+struct v4l2_ioctl_callbacks;
+struct video_device;
+struct v4l2_device;
+struct v4l2_ctrl_handler;
+
+/* Flag to mark the video_device struct as registered.
+   Drivers can clear this flag if they want to block all future
+   device access. It is cleared by video_unregister_device. */
+#define V4L2_FL_REGISTERED	(0)
+/* file->private_data points to struct v4l2_fh */
+#define V4L2_FL_USES_V4L2_FH	(1)
+/* Use the prio field of v4l2_fh for core priority checking */
+#define V4L2_FL_USE_FH_PRIO	(2)
+
+/* Priority helper functions */
+
+struct v4l2_prio_state {
+	atomic_t prios[4];
+};
+
+void v4l2_prio_init(struct v4l2_prio_state *global);
+int v4l2_prio_change(struct v4l2_prio_state *global, enum v4l2_priority *local,
+		     enum v4l2_priority new);
+void v4l2_prio_open(struct v4l2_prio_state *global, enum v4l2_priority *local);
+void v4l2_prio_close(struct v4l2_prio_state *global, enum v4l2_priority local);
+enum v4l2_priority v4l2_prio_max(struct v4l2_prio_state *global);
+int v4l2_prio_check(struct v4l2_prio_state *global, enum v4l2_priority local);
+
+
+struct v4l2_file_operations {
+	struct module *owner;
+	ssize_t (*read) (struct file *, char __user *, size_t, loff_t *);
+	ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *);
+	unsigned int (*poll) (struct file *, struct poll_table_struct *);
+	long (*ioctl) (struct file *, unsigned int, unsigned long);
+	long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
+#ifdef CONFIG_COMPAT
+	long (*compat_ioctl32) (struct file *, unsigned int, unsigned long);
+#endif
+	unsigned long (*get_unmapped_area) (struct file *, unsigned long,
+				unsigned long, unsigned long, unsigned long);
+	int (*mmap) (struct file *, struct vm_area_struct *);
+	int (*open) (struct file *);
+	int (*release) (struct file *);
+};
+
+/*
+ * Newer version of video_device, handled by videodev2.c
+ * 	This version moves redundant code from video device code to
+ *	the common handler
+ */
+
+struct video_device
+{
+#if defined(CONFIG_MEDIA_CONTROLLER)
+	struct media_entity entity;
+#endif
+	/* device ops */
+	const struct v4l2_file_operations *fops;
+
+	/* sysfs */
+	struct device dev;		/* v4l device */
+	struct cdev *cdev;		/* character device */
+
+	/* Set either parent or v4l2_dev if your driver uses v4l2_device */
+	struct device *parent;		/* device parent */
+	struct v4l2_device *v4l2_dev;	/* v4l2_device parent */
+
+	/* Control handler associated with this device node. May be NULL. */
+	struct v4l2_ctrl_handler *ctrl_handler;
+
+	/* Priority state. If NULL, then v4l2_dev->prio will be used. */
+	struct v4l2_prio_state *prio;
+
+	/* device info */
+	char name[32];
+	int vfl_type;
+	/* 'minor' is set to -1 if the registration failed */
+	int minor;
+	u16 num;
+	/* use bitops to set/clear/test flags */
+	unsigned long flags;
+	/* attribute to differentiate multiple indices on one physical device */
+	int index;
+
+	/* V4L2 file handles */
+	spinlock_t		fh_lock; /* Lock for all v4l2_fhs */
+	struct list_head	fh_list; /* List of struct v4l2_fh */
+
+	int debug;			/* Activates debug level*/
+
+	/* Video standard vars */
+	v4l2_std_id tvnorms;		/* Supported tv norms */
+	v4l2_std_id current_norm;	/* Current tvnorm */
+
+	/* callbacks */
+	void (*release)(struct video_device *vdev);
+
+	/* ioctl callbacks */
+	const struct v4l2_ioctl_ops *ioctl_ops;
+
+	/* serialization lock */
+	struct mutex *lock;
+};
+
+#define media_entity_to_video_device(__e) \
+	container_of(__e, struct video_device, entity)
+/* dev to video-device */
+#define to_video_device(cd) container_of(cd, struct video_device, dev)
+
+int __must_check __video_register_device(struct video_device *vdev, int type,
+		int nr, int warn_if_nr_in_use, struct module *owner);
+
+/* Register video devices. Note that if video_register_device fails,
+   the release() callback of the video_device structure is *not* called, so
+   the caller is responsible for freeing any data. Usually that means that
+   you call video_device_release() on failure. */
+static inline int __must_check video_register_device(struct video_device *vdev,
+		int type, int nr)
+{
+	return __video_register_device(vdev, type, nr, 1, vdev->fops->owner);
+}
+
+/* Same as video_register_device, but no warning is issued if the desired
+   device node number was already in use. */
+static inline int __must_check video_register_device_no_warn(
+		struct video_device *vdev, int type, int nr)
+{
+	return __video_register_device(vdev, type, nr, 0, vdev->fops->owner);
+}
+
+/* Unregister video devices. Will do nothing if vdev == NULL or
+   video_is_registered() returns false. */
+void video_unregister_device(struct video_device *vdev);
+
+/* helper functions to alloc/release struct video_device, the
+   latter can also be used for video_device->release(). */
+struct video_device * __must_check video_device_alloc(void);
+
+/* this release function frees the vdev pointer */
+void video_device_release(struct video_device *vdev);
+
+/* this release function does nothing, use when the video_device is a
+   static global struct. Note that having a static video_device is
+   a dubious construction at best. */
+void video_device_release_empty(struct video_device *vdev);
+
+/* helper functions to access driver private data. */
+static inline void *video_get_drvdata(struct video_device *vdev)
+{
+	return dev_get_drvdata(&vdev->dev);
+}
+
+static inline void video_set_drvdata(struct video_device *vdev, void *data)
+{
+	dev_set_drvdata(&vdev->dev, data);
+}
+
+struct video_device *video_devdata(struct file *file);
+
+/* Combine video_get_drvdata and video_devdata as this is
+   used very often. */
+static inline void *video_drvdata(struct file *file)
+{
+	return video_get_drvdata(video_devdata(file));
+}
+
+static inline const char *video_device_node_name(struct video_device *vdev)
+{
+	return dev_name(&vdev->dev);
+}
+
+static inline int video_is_registered(struct video_device *vdev)
+{
+	return test_bit(V4L2_FL_REGISTERED, &vdev->flags);
+}
+
+#endif /* _V4L2_DEV_H */
diff --git a/include/media/v4l2-device.h b/include/media/v4l2-device.h
new file mode 100644
index 00000000..d61febfb
--- /dev/null
+++ b/include/media/v4l2-device.h
@@ -0,0 +1,193 @@
+/*
+    V4L2 device support header.
+
+    Copyright (C) 2008  Hans Verkuil <hverkuil@xs4all.nl>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _V4L2_DEVICE_H
+#define _V4L2_DEVICE_H
+
+#include <media/media-device.h>
+#include <media/v4l2-subdev.h>
+#include <media/v4l2-dev.h>
+
+/* Each instance of a V4L2 device should create the v4l2_device struct,
+   either stand-alone or embedded in a larger struct.
+
+   It allows easy access to sub-devices (see v4l2-subdev.h) and provides
+   basic V4L2 device-level support.
+ */
+
+#define V4L2_DEVICE_NAME_SIZE (20 + 16)
+
+struct v4l2_ctrl_handler;
+
+struct v4l2_device {
+	/* dev->driver_data points to this struct.
+	   Note: dev might be NULL if there is no parent device
+	   as is the case with e.g. ISA devices. */
+	struct device *dev;
+#if defined(CONFIG_MEDIA_CONTROLLER)
+	struct media_device *mdev;
+#endif
+	/* used to keep track of the registered subdevs */
+	struct list_head subdevs;
+	/* lock this struct; can be used by the driver as well if this
+	   struct is embedded into a larger struct. */
+	spinlock_t lock;
+	/* unique device name, by default the driver name + bus ID */
+	char name[V4L2_DEVICE_NAME_SIZE];
+	/* notify callback called by some sub-devices. */
+	void (*notify)(struct v4l2_subdev *sd,
+			unsigned int notification, void *arg);
+	/* The control handler. May be NULL. */
+	struct v4l2_ctrl_handler *ctrl_handler;
+	/* Device's priority state */
+	struct v4l2_prio_state prio;
+	/* BKL replacement mutex. Temporary solution only. */
+	struct mutex ioctl_lock;
+	/* Keep track of the references to this struct. */
+	struct kref ref;
+	/* Release function that is called when the ref count goes to 0. */
+	void (*release)(struct v4l2_device *v4l2_dev);
+};
+
+static inline void v4l2_device_get(struct v4l2_device *v4l2_dev)
+{
+	kref_get(&v4l2_dev->ref);
+}
+
+int v4l2_device_put(struct v4l2_device *v4l2_dev);
+
+/* Initialize v4l2_dev and make dev->driver_data point to v4l2_dev.
+   dev may be NULL in rare cases (ISA devices). In that case you
+   must fill in the v4l2_dev->name field before calling this function. */
+int __must_check v4l2_device_register(struct device *dev, struct v4l2_device *v4l2_dev);
+
+/* Optional function to initialize the name field of struct v4l2_device using
+   the driver name and a driver-global atomic_t instance.
+   This function will increment the instance counter and returns the instance
+   value used in the name.
+
+   Example:
+
+   static atomic_t drv_instance = ATOMIC_INIT(0);
+
+   ...
+
+   instance = v4l2_device_set_name(&v4l2_dev, "foo", &drv_instance);
+
+   The first time this is called the name field will be set to foo0 and
+   this function returns 0. If the name ends with a digit (e.g. cx18),
+   then the name will be set to cx18-0 since cx180 looks really odd. */
+int v4l2_device_set_name(struct v4l2_device *v4l2_dev, const char *basename,
+						atomic_t *instance);
+
+/* Set v4l2_dev->dev to NULL. Call when the USB parent disconnects.
+   Since the parent disappears this ensures that v4l2_dev doesn't have an
+   invalid parent pointer. */
+void v4l2_device_disconnect(struct v4l2_device *v4l2_dev);
+
+/* Unregister all sub-devices and any other resources related to v4l2_dev. */
+void v4l2_device_unregister(struct v4l2_device *v4l2_dev);
+
+/* Register a subdev with a v4l2 device. While registered the subdev module
+   is marked as in-use. An error is returned if the module is no longer
+   loaded when you attempt to register it. */
+int __must_check v4l2_device_register_subdev(struct v4l2_device *v4l2_dev,
+						struct v4l2_subdev *sd);
+/* Unregister a subdev with a v4l2 device. Can also be called if the subdev
+   wasn't registered. In that case it will do nothing. */
+void v4l2_device_unregister_subdev(struct v4l2_subdev *sd);
+
+/* Register device nodes for all subdev of the v4l2 device that are marked with
+ * the V4L2_SUBDEV_FL_HAS_DEVNODE flag.
+ */
+int __must_check
+v4l2_device_register_subdev_nodes(struct v4l2_device *v4l2_dev);
+
+/* Iterate over all subdevs. */
+#define v4l2_device_for_each_subdev(sd, v4l2_dev)			\
+	list_for_each_entry(sd, &(v4l2_dev)->subdevs, list)
+
+/* Call the specified callback for all subdevs matching the condition.
+   Ignore any errors. Note that you cannot add or delete a subdev
+   while walking the subdevs list. */
+#define __v4l2_device_call_subdevs_p(v4l2_dev, sd, cond, o, f, args...)	\
+	do { 								\
+		list_for_each_entry((sd), &(v4l2_dev)->subdevs, list)	\
+			if ((cond) && (sd)->ops->o && (sd)->ops->o->f)	\
+				(sd)->ops->o->f((sd) , ##args);		\
+	} while (0)
+
+#define __v4l2_device_call_subdevs(v4l2_dev, cond, o, f, args...)	\
+	do {								\
+		struct v4l2_subdev *__sd;				\
+									\
+		__v4l2_device_call_subdevs_p(v4l2_dev, __sd, cond, o,	\
+						f , ##args);		\
+	} while (0)
+
+/* Call the specified callback for all subdevs matching the condition.
+   If the callback returns an error other than 0 or -ENOIOCTLCMD, then
+   return with that error code. Note that you cannot add or delete a
+   subdev while walking the subdevs list. */
+#define __v4l2_device_call_subdevs_until_err_p(v4l2_dev, sd, cond, o, f, args...) \
+({ 									\
+	long __err = 0;							\
+									\
+	list_for_each_entry((sd), &(v4l2_dev)->subdevs, list) {		\
+		if ((cond) && (sd)->ops->o && (sd)->ops->o->f)		\
+			__err = (sd)->ops->o->f((sd) , ##args);		\
+		if (__err && __err != -ENOIOCTLCMD)			\
+			break; 						\
+	} 								\
+	(__err == -ENOIOCTLCMD) ? 0 : __err;				\
+})
+
+#define __v4l2_device_call_subdevs_until_err(v4l2_dev, cond, o, f, args...) \
+({									\
+	struct v4l2_subdev *__sd;					\
+	__v4l2_device_call_subdevs_until_err_p(v4l2_dev, __sd, cond, o,	\
+						f , ##args);		\
+})
+
+/* Call the specified callback for all subdevs matching grp_id (if 0, then
+   match them all). Ignore any errors. Note that you cannot add or delete
+   a subdev while walking the subdevs list. */
+#define v4l2_device_call_all(v4l2_dev, grpid, o, f, args...)		\
+	do {								\
+		struct v4l2_subdev *__sd;				\
+									\
+		__v4l2_device_call_subdevs_p(v4l2_dev, __sd,		\
+			!(grpid) || __sd->grp_id == (grpid), o, f ,	\
+			##args);					\
+	} while (0)
+
+/* Call the specified callback for all subdevs matching grp_id (if 0, then
+   match them all). If the callback returns an error other than 0 or
+   -ENOIOCTLCMD, then return with that error code. Note that you cannot
+   add or delete a subdev while walking the subdevs list. */
+#define v4l2_device_call_until_err(v4l2_dev, grpid, o, f, args...) 	\
+({									\
+	struct v4l2_subdev *__sd;					\
+	__v4l2_device_call_subdevs_until_err_p(v4l2_dev, __sd,		\
+			!(grpid) || __sd->grp_id == (grpid), o, f ,	\
+			##args);					\
+})
+
+#endif
diff --git a/include/media/v4l2-event.h b/include/media/v4l2-event.h
new file mode 100644
index 00000000..5f14e889
--- /dev/null
+++ b/include/media/v4l2-event.h
@@ -0,0 +1,123 @@
+/*
+ * v4l2-event.h
+ *
+ * V4L2 events.
+ *
+ * Copyright (C) 2009--2010 Nokia Corporation.
+ *
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef V4L2_EVENT_H
+#define V4L2_EVENT_H
+
+#include <linux/types.h>
+#include <linux/videodev2.h>
+#include <linux/wait.h>
+
+/*
+ * Overview:
+ *
+ * Events are subscribed per-filehandle. An event specification consists of a
+ * type and is optionally associated with an object identified through the
+ * 'id' field. So an event is uniquely identified by the (type, id) tuple.
+ *
+ * The v4l2-fh struct has a list of subscribed events. The v4l2_subscribed_event
+ * struct is added to that list, one for every subscribed event.
+ *
+ * Each v4l2_subscribed_event struct ends with an array of v4l2_kevent structs.
+ * This array (ringbuffer, really) is used to store any events raised by the
+ * driver. The v4l2_kevent struct links into the 'available' list of the
+ * v4l2_fh struct so VIDIOC_DQEVENT will know which event to dequeue first.
+ *
+ * Finally, if the event subscription is associated with a particular object
+ * such as a V4L2 control, then that object needs to know about that as well
+ * so that an event can be raised by that object. So the 'node' field can
+ * be used to link the v4l2_subscribed_event struct into a list of that
+ * object.
+ *
+ * So to summarize:
+ *
+ * struct v4l2_fh has two lists: one of the subscribed events, and one of the
+ * pending events.
+ *
+ * struct v4l2_subscribed_event has a ringbuffer of raised (pending) events of
+ * that particular type.
+ *
+ * If struct v4l2_subscribed_event is associated with a specific object, then
+ * that object will have an internal list of struct v4l2_subscribed_event so
+ * it knows who subscribed an event to that object.
+ */
+
+struct v4l2_fh;
+struct v4l2_subscribed_event;
+struct video_device;
+
+/** struct v4l2_kevent - Internal kernel event struct.
+  * @list:	List node for the v4l2_fh->available list.
+  * @sev:	Pointer to parent v4l2_subscribed_event.
+  * @event:	The event itself.
+  */
+struct v4l2_kevent {
+	struct list_head	list;
+	struct v4l2_subscribed_event *sev;
+	struct v4l2_event	event;
+};
+
+/** struct v4l2_subscribed_event - Internal struct representing a subscribed event.
+  * @list:	List node for the v4l2_fh->subscribed list.
+  * @type:	Event type.
+  * @id:	Associated object ID (e.g. control ID). 0 if there isn't any.
+  * @flags:	Copy of v4l2_event_subscription->flags.
+  * @fh:	Filehandle that subscribed to this event.
+  * @node:	List node that hooks into the object's event list (if there is one).
+  * @replace:	Optional callback that can replace event 'old' with event 'new'.
+  * @merge:	Optional callback that can merge event 'old' into event 'new'.
+  * @elems:	The number of elements in the events array.
+  * @first:	The index of the events containing the oldest available event.
+  * @in_use:	The number of queued events.
+  * @events:	An array of @elems events.
+  */
+struct v4l2_subscribed_event {
+	struct list_head	list;
+	u32			type;
+	u32			id;
+	u32			flags;
+	struct v4l2_fh		*fh;
+	struct list_head	node;
+	void			(*replace)(struct v4l2_event *old,
+					   const struct v4l2_event *new);
+	void			(*merge)(const struct v4l2_event *old,
+					 struct v4l2_event *new);
+	unsigned		elems;
+	unsigned		first;
+	unsigned		in_use;
+	struct v4l2_kevent	events[];
+};
+
+int v4l2_event_dequeue(struct v4l2_fh *fh, struct v4l2_event *event,
+		       int nonblocking);
+void v4l2_event_queue(struct video_device *vdev, const struct v4l2_event *ev);
+void v4l2_event_queue_fh(struct v4l2_fh *fh, const struct v4l2_event *ev);
+int v4l2_event_pending(struct v4l2_fh *fh);
+int v4l2_event_subscribe(struct v4l2_fh *fh,
+			 struct v4l2_event_subscription *sub, unsigned elems);
+int v4l2_event_unsubscribe(struct v4l2_fh *fh,
+			   struct v4l2_event_subscription *sub);
+void v4l2_event_unsubscribe_all(struct v4l2_fh *fh);
+
+#endif /* V4L2_EVENT_H */
diff --git a/include/media/v4l2-fh.h b/include/media/v4l2-fh.h
new file mode 100644
index 00000000..52513c22
--- /dev/null
+++ b/include/media/v4l2-fh.h
@@ -0,0 +1,101 @@
+/*
+ * v4l2-fh.h
+ *
+ * V4L2 file handle. Store per file handle data for the V4L2
+ * framework. Using file handles is optional for the drivers.
+ *
+ * Copyright (C) 2009--2010 Nokia Corporation.
+ *
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef V4L2_FH_H
+#define V4L2_FH_H
+
+#include <linux/list.h>
+
+struct video_device;
+struct v4l2_ctrl_handler;
+
+struct v4l2_fh {
+	struct list_head	list;
+	struct video_device	*vdev;
+	struct v4l2_ctrl_handler *ctrl_handler;
+	enum v4l2_priority	prio;
+
+	/* Events */
+	wait_queue_head_t	wait;
+	struct list_head	subscribed; /* Subscribed events */
+	struct list_head	available; /* Dequeueable event */
+	unsigned int		navailable;
+	u32			sequence;
+};
+
+/*
+ * Initialise the file handle. Parts of the V4L2 framework using the
+ * file handles should be initialised in this function. Must be called
+ * from driver's v4l2_file_operations->open() handler if the driver
+ * uses v4l2_fh.
+ */
+void v4l2_fh_init(struct v4l2_fh *fh, struct video_device *vdev);
+/*
+ * Add the fh to the list of file handles on a video_device. The file
+ * handle must be initialised first.
+ */
+void v4l2_fh_add(struct v4l2_fh *fh);
+/*
+ * Can be used as the open() op of v4l2_file_operations.
+ * It allocates a v4l2_fh and inits and adds it to the video_device associated
+ * with the file pointer.
+ */
+int v4l2_fh_open(struct file *filp);
+/*
+ * Remove file handle from the list of file handles. Must be called in
+ * v4l2_file_operations->release() handler if the driver uses v4l2_fh.
+ * On error filp->private_data will be NULL, otherwise it will point to
+ * the v4l2_fh struct.
+ */
+void v4l2_fh_del(struct v4l2_fh *fh);
+/*
+ * Release resources related to a file handle. Parts of the V4L2
+ * framework using the v4l2_fh must release their resources here, too.
+ * Must be called in v4l2_file_operations->release() handler if the
+ * driver uses v4l2_fh.
+ */
+void v4l2_fh_exit(struct v4l2_fh *fh);
+/*
+ * Can be used as the release() op of v4l2_file_operations.
+ * It deletes and exits the v4l2_fh associated with the file pointer and
+ * frees it. It will do nothing if filp->private_data (the pointer to the
+ * v4l2_fh struct) is NULL. This function always returns 0.
+ */
+int v4l2_fh_release(struct file *filp);
+/*
+ * Returns 1 if this filehandle is the only filehandle opened for the
+ * associated video_device. If fh is NULL, then it returns 0.
+ */
+int v4l2_fh_is_singular(struct v4l2_fh *fh);
+/*
+ * Helper function with struct file as argument. If filp->private_data is
+ * NULL, then it will return 0.
+ */
+static inline int v4l2_fh_is_singular_file(struct file *filp)
+{
+	return v4l2_fh_is_singular(filp->private_data);
+}
+
+#endif /* V4L2_EVENT_H */
diff --git a/include/media/v4l2-int-device.h b/include/media/v4l2-int-device.h
new file mode 100644
index 00000000..e6aa2318
--- /dev/null
+++ b/include/media/v4l2-int-device.h
@@ -0,0 +1,308 @@
+/*
+ * include/media/v4l2-int-device.h
+ *
+ * V4L2 internal ioctl interface.
+ *
+ * Copyright (C) 2007 Nokia Corporation.
+ *
+ * Contact: Sakari Ailus <sakari.ailus@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef V4L2_INT_DEVICE_H
+#define V4L2_INT_DEVICE_H
+
+#include <media/v4l2-common.h>
+
+#define V4L2NAMESIZE 32
+
+/*
+ *
+ * The internal V4L2 device interface core.
+ *
+ */
+
+enum v4l2_int_type {
+	v4l2_int_type_master = 1,
+	v4l2_int_type_slave
+};
+
+struct module;
+
+struct v4l2_int_device;
+
+struct v4l2_int_master {
+	int (*attach)(struct v4l2_int_device *slave);
+	void (*detach)(struct v4l2_int_device *slave);
+};
+
+typedef int (v4l2_int_ioctl_func)(struct v4l2_int_device *);
+typedef int (v4l2_int_ioctl_func_0)(struct v4l2_int_device *);
+typedef int (v4l2_int_ioctl_func_1)(struct v4l2_int_device *, void *);
+
+struct v4l2_int_ioctl_desc {
+	int num;
+	v4l2_int_ioctl_func *func;
+};
+
+struct v4l2_int_slave {
+	/* Don't touch master. */
+	struct v4l2_int_device *master;
+
+	char attach_to[V4L2NAMESIZE];
+
+	int num_ioctls;
+	struct v4l2_int_ioctl_desc *ioctls;
+};
+
+struct v4l2_int_device {
+	/* Don't touch head. */
+	struct list_head head;
+
+	struct module *module;
+
+	char name[V4L2NAMESIZE];
+
+	enum v4l2_int_type type;
+	union {
+		struct v4l2_int_master *master;
+		struct v4l2_int_slave *slave;
+	} u;
+
+	void *priv;
+};
+
+void v4l2_int_device_try_attach_all(void);
+
+int v4l2_int_device_register(struct v4l2_int_device *d);
+void v4l2_int_device_unregister(struct v4l2_int_device *d);
+
+int v4l2_int_ioctl_0(struct v4l2_int_device *d, int cmd);
+int v4l2_int_ioctl_1(struct v4l2_int_device *d, int cmd, void *arg);
+
+/*
+ *
+ * Types and definitions for IOCTL commands.
+ *
+ */
+
+enum v4l2_power {
+	V4L2_POWER_OFF = 0,
+	V4L2_POWER_ON,
+	V4L2_POWER_STANDBY,
+};
+
+/* Slave interface type. */
+enum v4l2_if_type {
+	/*
+	 * Parallel 8-, 10- or 12-bit interface, used by for example
+	 * on certain image sensors.
+	 */
+	V4L2_IF_TYPE_BT656,
+};
+
+enum v4l2_if_type_bt656_mode {
+	/*
+	 * Modes without Bt synchronisation codes. Separate
+	 * synchronisation signal lines are used.
+	 */
+	V4L2_IF_TYPE_BT656_MODE_NOBT_8BIT,
+	V4L2_IF_TYPE_BT656_MODE_NOBT_10BIT,
+	V4L2_IF_TYPE_BT656_MODE_NOBT_12BIT,
+	/*
+	 * Use Bt synchronisation codes. The vertical and horizontal
+	 * synchronisation is done based on synchronisation codes.
+	 */
+	V4L2_IF_TYPE_BT656_MODE_BT_8BIT,
+	V4L2_IF_TYPE_BT656_MODE_BT_10BIT,
+};
+
+struct v4l2_if_type_bt656 {
+	/*
+	 * 0: Frame begins when vsync is high.
+	 * 1: Frame begins when vsync changes from low to high.
+	 */
+	unsigned frame_start_on_rising_vs:1;
+	/* Use Bt synchronisation codes for sync correction. */
+	unsigned bt_sync_correct:1;
+	/* Swap every two adjacent image data elements. */
+	unsigned swap:1;
+	/* Inverted latch clock polarity from slave. */
+	unsigned latch_clk_inv:1;
+	/* Hs polarity. 0 is active high, 1 active low. */
+	unsigned nobt_hs_inv:1;
+	/* Vs polarity. 0 is active high, 1 active low. */
+	unsigned nobt_vs_inv:1;
+	enum v4l2_if_type_bt656_mode mode;
+	/* Minimum accepted bus clock for slave (in Hz). */
+	u32 clock_min;
+	/* Maximum accepted bus clock for slave. */
+	u32 clock_max;
+	/*
+	 * Current wish of the slave. May only change in response to
+	 * ioctls that affect image capture.
+	 */
+	u32 clock_curr;
+};
+
+struct v4l2_ifparm {
+	enum v4l2_if_type if_type;
+	union {
+		struct v4l2_if_type_bt656 bt656;
+	} u;
+};
+
+/* IOCTL command numbers. */
+enum v4l2_int_ioctl_num {
+	/*
+	 *
+	 * "Proper" V4L ioctls, as in struct video_device.
+	 *
+	 */
+	vidioc_int_enum_fmt_cap_num = 1,
+	vidioc_int_g_fmt_cap_num,
+	vidioc_int_s_fmt_cap_num,
+	vidioc_int_try_fmt_cap_num,
+	vidioc_int_queryctrl_num,
+	vidioc_int_g_ctrl_num,
+	vidioc_int_s_ctrl_num,
+	vidioc_int_cropcap_num,
+	vidioc_int_g_crop_num,
+	vidioc_int_s_crop_num,
+	vidioc_int_g_parm_num,
+	vidioc_int_s_parm_num,
+	vidioc_int_querystd_num,
+	vidioc_int_s_std_num,
+	vidioc_int_s_video_routing_num,
+
+	/*
+	 *
+	 * Strictly internal ioctls.
+	 *
+	 */
+	/* Initialise the device when slave attaches to the master. */
+	vidioc_int_dev_init_num = 1000,
+	/* Delinitialise the device at slave detach. */
+	vidioc_int_dev_exit_num,
+	/* Set device power state. */
+	vidioc_int_s_power_num,
+	/*
+	* Get slave private data, e.g. platform-specific slave
+	* configuration used by the master.
+	*/
+	vidioc_int_g_priv_num,
+	/* Get slave interface parameters. */
+	vidioc_int_g_ifparm_num,
+	/* Does the slave need to be reset after VIDIOC_DQBUF? */
+	vidioc_int_g_needs_reset_num,
+	vidioc_int_enum_framesizes_num,
+	vidioc_int_enum_frameintervals_num,
+
+	/*
+	 *
+	 * VIDIOC_INT_* ioctls.
+	 *
+	 */
+	/* VIDIOC_INT_RESET */
+	vidioc_int_reset_num,
+	/* VIDIOC_INT_INIT */
+	vidioc_int_init_num,
+	/* VIDIOC_DBG_G_CHIP_IDENT */
+	vidioc_int_g_chip_ident_num,
+
+	/*
+	 *
+	 * Start of private ioctls.
+	 *
+	 */
+	vidioc_int_priv_start_num = 2000,
+};
+
+/*
+ *
+ * IOCTL wrapper functions for better type checking.
+ *
+ */
+
+#define V4L2_INT_WRAPPER_0(name)					\
+	static inline int vidioc_int_##name(struct v4l2_int_device *d)	\
+	{								\
+		return v4l2_int_ioctl_0(d, vidioc_int_##name##_num);	\
+	}								\
+									\
+	static inline struct v4l2_int_ioctl_desc			\
+	vidioc_int_##name##_cb(int (*func)				\
+			       (struct v4l2_int_device *))		\
+	{								\
+		struct v4l2_int_ioctl_desc desc;			\
+									\
+		desc.num = vidioc_int_##name##_num;			\
+		desc.func = (v4l2_int_ioctl_func *)func;		\
+									\
+		return desc;						\
+	}
+
+#define V4L2_INT_WRAPPER_1(name, arg_type, asterisk)			\
+	static inline int vidioc_int_##name(struct v4l2_int_device *d,	\
+					    arg_type asterisk arg)	\
+	{								\
+		return v4l2_int_ioctl_1(d, vidioc_int_##name##_num,	\
+					(void *)(unsigned long)arg);	\
+	}								\
+									\
+	static inline struct v4l2_int_ioctl_desc			\
+	vidioc_int_##name##_cb(int (*func)				\
+			       (struct v4l2_int_device *,		\
+				arg_type asterisk))			\
+	{								\
+		struct v4l2_int_ioctl_desc desc;			\
+									\
+		desc.num = vidioc_int_##name##_num;			\
+		desc.func = (v4l2_int_ioctl_func *)func;		\
+									\
+		return desc;						\
+	}
+
+V4L2_INT_WRAPPER_1(enum_fmt_cap, struct v4l2_fmtdesc, *);
+V4L2_INT_WRAPPER_1(g_fmt_cap, struct v4l2_format, *);
+V4L2_INT_WRAPPER_1(s_fmt_cap, struct v4l2_format, *);
+V4L2_INT_WRAPPER_1(try_fmt_cap, struct v4l2_format, *);
+V4L2_INT_WRAPPER_1(queryctrl, struct v4l2_queryctrl, *);
+V4L2_INT_WRAPPER_1(g_ctrl, struct v4l2_control, *);
+V4L2_INT_WRAPPER_1(s_ctrl, struct v4l2_control, *);
+V4L2_INT_WRAPPER_1(cropcap, struct v4l2_cropcap, *);
+V4L2_INT_WRAPPER_1(g_crop, struct v4l2_crop, *);
+V4L2_INT_WRAPPER_1(s_crop, struct v4l2_crop, *);
+V4L2_INT_WRAPPER_1(g_parm, struct v4l2_streamparm, *);
+V4L2_INT_WRAPPER_1(s_parm, struct v4l2_streamparm, *);
+V4L2_INT_WRAPPER_1(querystd, v4l2_std_id, *);
+V4L2_INT_WRAPPER_1(s_std, v4l2_std_id, *);
+V4L2_INT_WRAPPER_1(s_video_routing, struct v4l2_routing, *);
+
+V4L2_INT_WRAPPER_0(dev_init);
+V4L2_INT_WRAPPER_0(dev_exit);
+V4L2_INT_WRAPPER_1(s_power, enum v4l2_power, );
+V4L2_INT_WRAPPER_1(g_priv, void, *);
+V4L2_INT_WRAPPER_1(g_ifparm, struct v4l2_ifparm, *);
+V4L2_INT_WRAPPER_1(g_needs_reset, void, *);
+V4L2_INT_WRAPPER_1(enum_framesizes, struct v4l2_frmsizeenum, *);
+V4L2_INT_WRAPPER_1(enum_frameintervals, struct v4l2_frmivalenum, *);
+
+V4L2_INT_WRAPPER_0(reset);
+V4L2_INT_WRAPPER_0(init);
+V4L2_INT_WRAPPER_1(g_chip_ident, int, *);
+
+#endif
diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h
new file mode 100644
index 00000000..3cb939cd
--- /dev/null
+++ b/include/media/v4l2-ioctl.h
@@ -0,0 +1,336 @@
+/*
+ *
+ *	V 4 L 2   D R I V E R   H E L P E R   A P I
+ *
+ * Moved from videodev2.h
+ *
+ *	Some commonly needed functions for drivers (v4l2-common.o module)
+ */
+#ifndef _V4L2_IOCTL_H
+#define _V4L2_IOCTL_H
+
+#include <linux/poll.h>
+#include <linux/fs.h>
+#include <linux/mutex.h>
+#include <linux/compiler.h> /* need __user */
+#include <linux/videodev2.h>
+
+struct v4l2_fh;
+
+struct v4l2_ioctl_ops {
+	/* ioctl callbacks */
+
+	/* VIDIOC_QUERYCAP handler */
+	int (*vidioc_querycap)(struct file *file, void *fh, struct v4l2_capability *cap);
+
+	/* Priority handling */
+	int (*vidioc_g_priority)   (struct file *file, void *fh,
+				    enum v4l2_priority *p);
+	int (*vidioc_s_priority)   (struct file *file, void *fh,
+				    enum v4l2_priority p);
+
+	/* VIDIOC_ENUM_FMT handlers */
+	int (*vidioc_enum_fmt_vid_cap)     (struct file *file, void *fh,
+					    struct v4l2_fmtdesc *f);
+	int (*vidioc_enum_fmt_vid_overlay) (struct file *file, void *fh,
+					    struct v4l2_fmtdesc *f);
+	int (*vidioc_enum_fmt_vid_out)     (struct file *file, void *fh,
+					    struct v4l2_fmtdesc *f);
+	int (*vidioc_enum_fmt_vid_cap_mplane)(struct file *file, void *fh,
+					      struct v4l2_fmtdesc *f);
+	int (*vidioc_enum_fmt_vid_out_mplane)(struct file *file, void *fh,
+					      struct v4l2_fmtdesc *f);
+	int (*vidioc_enum_fmt_type_private)(struct file *file, void *fh,
+					    struct v4l2_fmtdesc *f);
+
+	/* VIDIOC_G_FMT handlers */
+	int (*vidioc_g_fmt_vid_cap)    (struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_vid_overlay)(struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_vid_out)    (struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_vid_out_overlay)(struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_vbi_cap)    (struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_vbi_out)    (struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_sliced_vbi_cap)(struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_sliced_vbi_out)(struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_vid_cap_mplane)(struct file *file, void *fh,
+					   struct v4l2_format *f);
+	int (*vidioc_g_fmt_vid_out_mplane)(struct file *file, void *fh,
+					   struct v4l2_format *f);
+	int (*vidioc_g_fmt_type_private)(struct file *file, void *fh,
+					struct v4l2_format *f);
+
+	/* VIDIOC_S_FMT handlers */
+	int (*vidioc_s_fmt_vid_cap)    (struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_vid_overlay)(struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_vid_out)    (struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_vid_out_overlay)(struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_vbi_cap)    (struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_vbi_out)    (struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_sliced_vbi_cap)(struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_sliced_vbi_out)(struct file *file, void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_vid_cap_mplane)(struct file *file, void *fh,
+					   struct v4l2_format *f);
+	int (*vidioc_s_fmt_vid_out_mplane)(struct file *file, void *fh,
+					   struct v4l2_format *f);
+	int (*vidioc_s_fmt_type_private)(struct file *file, void *fh,
+					struct v4l2_format *f);
+
+	/* VIDIOC_TRY_FMT handlers */
+	int (*vidioc_try_fmt_vid_cap)    (struct file *file, void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_vid_overlay)(struct file *file, void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_vid_out)    (struct file *file, void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_vid_out_overlay)(struct file *file, void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_vbi_cap)    (struct file *file, void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_vbi_out)    (struct file *file, void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_sliced_vbi_cap)(struct file *file, void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_sliced_vbi_out)(struct file *file, void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_vid_cap_mplane)(struct file *file, void *fh,
+					     struct v4l2_format *f);
+	int (*vidioc_try_fmt_vid_out_mplane)(struct file *file, void *fh,
+					     struct v4l2_format *f);
+	int (*vidioc_try_fmt_type_private)(struct file *file, void *fh,
+					  struct v4l2_format *f);
+
+	/* Buffer handlers */
+	int (*vidioc_reqbufs) (struct file *file, void *fh, struct v4l2_requestbuffers *b);
+	int (*vidioc_querybuf)(struct file *file, void *fh, struct v4l2_buffer *b);
+	int (*vidioc_qbuf)    (struct file *file, void *fh, struct v4l2_buffer *b);
+	int (*vidioc_dqbuf)   (struct file *file, void *fh, struct v4l2_buffer *b);
+
+	int (*vidioc_create_bufs)(struct file *file, void *fh, struct v4l2_create_buffers *b);
+	int (*vidioc_prepare_buf)(struct file *file, void *fh, struct v4l2_buffer *b);
+
+	int (*vidioc_overlay) (struct file *file, void *fh, unsigned int i);
+	int (*vidioc_g_fbuf)   (struct file *file, void *fh,
+				struct v4l2_framebuffer *a);
+	int (*vidioc_s_fbuf)   (struct file *file, void *fh,
+				struct v4l2_framebuffer *a);
+
+		/* Stream on/off */
+	int (*vidioc_streamon) (struct file *file, void *fh, enum v4l2_buf_type i);
+	int (*vidioc_streamoff)(struct file *file, void *fh, enum v4l2_buf_type i);
+
+		/* Standard handling
+			ENUMSTD is handled by videodev.c
+		 */
+	int (*vidioc_g_std) (struct file *file, void *fh, v4l2_std_id *norm);
+	int (*vidioc_s_std) (struct file *file, void *fh, v4l2_std_id *norm);
+	int (*vidioc_querystd) (struct file *file, void *fh, v4l2_std_id *a);
+
+		/* Input handling */
+	int (*vidioc_enum_input)(struct file *file, void *fh,
+				 struct v4l2_input *inp);
+	int (*vidioc_g_input)   (struct file *file, void *fh, unsigned int *i);
+	int (*vidioc_s_input)   (struct file *file, void *fh, unsigned int i);
+
+		/* Output handling */
+	int (*vidioc_enum_output) (struct file *file, void *fh,
+				  struct v4l2_output *a);
+	int (*vidioc_g_output)   (struct file *file, void *fh, unsigned int *i);
+	int (*vidioc_s_output)   (struct file *file, void *fh, unsigned int i);
+
+		/* Control handling */
+	int (*vidioc_queryctrl)        (struct file *file, void *fh,
+					struct v4l2_queryctrl *a);
+	int (*vidioc_g_ctrl)           (struct file *file, void *fh,
+					struct v4l2_control *a);
+	int (*vidioc_s_ctrl)           (struct file *file, void *fh,
+					struct v4l2_control *a);
+	int (*vidioc_g_ext_ctrls)      (struct file *file, void *fh,
+					struct v4l2_ext_controls *a);
+	int (*vidioc_s_ext_ctrls)      (struct file *file, void *fh,
+					struct v4l2_ext_controls *a);
+	int (*vidioc_try_ext_ctrls)    (struct file *file, void *fh,
+					struct v4l2_ext_controls *a);
+	int (*vidioc_querymenu)        (struct file *file, void *fh,
+					struct v4l2_querymenu *a);
+
+	/* Audio ioctls */
+	int (*vidioc_enumaudio)        (struct file *file, void *fh,
+					struct v4l2_audio *a);
+	int (*vidioc_g_audio)          (struct file *file, void *fh,
+					struct v4l2_audio *a);
+	int (*vidioc_s_audio)          (struct file *file, void *fh,
+					struct v4l2_audio *a);
+
+	/* Audio out ioctls */
+	int (*vidioc_enumaudout)       (struct file *file, void *fh,
+					struct v4l2_audioout *a);
+	int (*vidioc_g_audout)         (struct file *file, void *fh,
+					struct v4l2_audioout *a);
+	int (*vidioc_s_audout)         (struct file *file, void *fh,
+					struct v4l2_audioout *a);
+	int (*vidioc_g_modulator)      (struct file *file, void *fh,
+					struct v4l2_modulator *a);
+	int (*vidioc_s_modulator)      (struct file *file, void *fh,
+					struct v4l2_modulator *a);
+	/* Crop ioctls */
+	int (*vidioc_cropcap)          (struct file *file, void *fh,
+					struct v4l2_cropcap *a);
+	int (*vidioc_g_crop)           (struct file *file, void *fh,
+					struct v4l2_crop *a);
+	int (*vidioc_s_crop)           (struct file *file, void *fh,
+					struct v4l2_crop *a);
+	int (*vidioc_g_selection)      (struct file *file, void *fh,
+					struct v4l2_selection *s);
+	int (*vidioc_s_selection)      (struct file *file, void *fh,
+					struct v4l2_selection *s);
+	/* Compression ioctls */
+	int (*vidioc_g_jpegcomp)       (struct file *file, void *fh,
+					struct v4l2_jpegcompression *a);
+	int (*vidioc_s_jpegcomp)       (struct file *file, void *fh,
+					struct v4l2_jpegcompression *a);
+	int (*vidioc_g_enc_index)      (struct file *file, void *fh,
+					struct v4l2_enc_idx *a);
+	int (*vidioc_encoder_cmd)      (struct file *file, void *fh,
+					struct v4l2_encoder_cmd *a);
+	int (*vidioc_try_encoder_cmd)  (struct file *file, void *fh,
+					struct v4l2_encoder_cmd *a);
+	int (*vidioc_decoder_cmd)      (struct file *file, void *fh,
+					struct v4l2_decoder_cmd *a);
+	int (*vidioc_try_decoder_cmd)  (struct file *file, void *fh,
+					struct v4l2_decoder_cmd *a);
+
+	/* Stream type-dependent parameter ioctls */
+	int (*vidioc_g_parm)           (struct file *file, void *fh,
+					struct v4l2_streamparm *a);
+	int (*vidioc_s_parm)           (struct file *file, void *fh,
+					struct v4l2_streamparm *a);
+
+	/* Tuner ioctls */
+	int (*vidioc_g_tuner)          (struct file *file, void *fh,
+					struct v4l2_tuner *a);
+	int (*vidioc_s_tuner)          (struct file *file, void *fh,
+					struct v4l2_tuner *a);
+	int (*vidioc_g_frequency)      (struct file *file, void *fh,
+					struct v4l2_frequency *a);
+	int (*vidioc_s_frequency)      (struct file *file, void *fh,
+					struct v4l2_frequency *a);
+
+	/* Sliced VBI cap */
+	int (*vidioc_g_sliced_vbi_cap) (struct file *file, void *fh,
+					struct v4l2_sliced_vbi_cap *a);
+
+	/* Log status ioctl */
+	int (*vidioc_log_status)       (struct file *file, void *fh);
+
+	int (*vidioc_s_hw_freq_seek)   (struct file *file, void *fh,
+					struct v4l2_hw_freq_seek *a);
+
+	/* Debugging ioctls */
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	int (*vidioc_g_register)       (struct file *file, void *fh,
+					struct v4l2_dbg_register *reg);
+	int (*vidioc_s_register)       (struct file *file, void *fh,
+					struct v4l2_dbg_register *reg);
+#endif
+	int (*vidioc_g_chip_ident)     (struct file *file, void *fh,
+					struct v4l2_dbg_chip_ident *chip);
+
+	int (*vidioc_enum_framesizes)   (struct file *file, void *fh,
+					 struct v4l2_frmsizeenum *fsize);
+
+	int (*vidioc_enum_frameintervals) (struct file *file, void *fh,
+					   struct v4l2_frmivalenum *fival);
+
+	/* DV Timings IOCTLs */
+	int (*vidioc_enum_dv_presets) (struct file *file, void *fh,
+				       struct v4l2_dv_enum_preset *preset);
+
+	int (*vidioc_s_dv_preset) (struct file *file, void *fh,
+				   struct v4l2_dv_preset *preset);
+	int (*vidioc_g_dv_preset) (struct file *file, void *fh,
+				   struct v4l2_dv_preset *preset);
+	int (*vidioc_query_dv_preset) (struct file *file, void *fh,
+					struct v4l2_dv_preset *qpreset);
+	int (*vidioc_s_dv_timings) (struct file *file, void *fh,
+				    struct v4l2_dv_timings *timings);
+	int (*vidioc_g_dv_timings) (struct file *file, void *fh,
+				    struct v4l2_dv_timings *timings);
+
+	int (*vidioc_subscribe_event)  (struct v4l2_fh *fh,
+					struct v4l2_event_subscription *sub);
+	int (*vidioc_unsubscribe_event)(struct v4l2_fh *fh,
+					struct v4l2_event_subscription *sub);
+
+	/* For other private ioctls */
+	long (*vidioc_default)	       (struct file *file, void *fh,
+					bool valid_prio, int cmd, void *arg);
+};
+
+
+/* v4l debugging and diagnostics */
+
+/* Debug bitmask flags to be used on V4L2 */
+#define V4L2_DEBUG_IOCTL     0x01
+#define V4L2_DEBUG_IOCTL_ARG 0x02
+
+/* Use this macro for non-I2C drivers. Pass the driver name as the first arg. */
+#define v4l_print_ioctl(name, cmd)  		 \
+	do {  					 \
+		printk(KERN_DEBUG "%s: ", name); \
+		v4l_printk_ioctl(cmd);		 \
+	} while (0)
+
+/* Use this macro in I2C drivers where 'client' is the struct i2c_client
+   pointer */
+#define v4l_i2c_print_ioctl(client, cmd) 		   \
+	do {      					   \
+		v4l_client_printk(KERN_DEBUG, client, ""); \
+		v4l_printk_ioctl(cmd);			   \
+	} while (0)
+
+/*  Video standard functions  */
+extern const char *v4l2_norm_to_name(v4l2_std_id id);
+extern void v4l2_video_std_frame_period(int id, struct v4l2_fract *frameperiod);
+extern int v4l2_video_std_construct(struct v4l2_standard *vs,
+				    int id, const char *name);
+/* Prints the ioctl in a human-readable format */
+extern void v4l_printk_ioctl(unsigned int cmd);
+
+/* names for fancy debug output */
+extern const char *v4l2_field_names[];
+extern const char *v4l2_type_names[];
+
+#ifdef CONFIG_COMPAT
+/* 32 Bits compatibility layer for 64 bits processors */
+extern long v4l2_compat_ioctl32(struct file *file, unsigned int cmd,
+				unsigned long arg);
+#endif
+
+typedef long (*v4l2_kioctl)(struct file *file,
+		unsigned int cmd, void *arg);
+
+/* Include support for obsoleted stuff */
+extern long video_usercopy(struct file *file, unsigned int cmd,
+				unsigned long arg, v4l2_kioctl func);
+
+/* Standard handlers for V4L ioctl's */
+extern long video_ioctl2(struct file *file,
+			unsigned int cmd, unsigned long arg);
+
+#endif /* _V4L2_IOCTL_H */
diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h
new file mode 100644
index 00000000..83ae07e5
--- /dev/null
+++ b/include/media/v4l2-mediabus.h
@@ -0,0 +1,107 @@
+/*
+ * Media Bus API header
+ *
+ * Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef V4L2_MEDIABUS_H
+#define V4L2_MEDIABUS_H
+
+#include <linux/v4l2-mediabus.h>
+
+/* Parallel flags */
+/*
+ * Can the client run in master or in slave mode. By "Master mode" an operation
+ * mode is meant, when the client (e.g., a camera sensor) is producing
+ * horizontal and vertical synchronisation. In "Slave mode" the host is
+ * providing these signals to the slave.
+ */
+#define V4L2_MBUS_MASTER			(1 << 0)
+#define V4L2_MBUS_SLAVE				(1 << 1)
+/*
+ * Signal polarity flags
+ * Note: in BT.656 mode HSYNC, FIELD, and VSYNC are unused
+ * V4L2_MBUS_[HV]SYNC* flags should be also used for specifying
+ * configuration of hardware that uses [HV]REF signals
+ */
+#define V4L2_MBUS_HSYNC_ACTIVE_HIGH		(1 << 2)
+#define V4L2_MBUS_HSYNC_ACTIVE_LOW		(1 << 3)
+#define V4L2_MBUS_VSYNC_ACTIVE_HIGH		(1 << 4)
+#define V4L2_MBUS_VSYNC_ACTIVE_LOW		(1 << 5)
+#define V4L2_MBUS_PCLK_SAMPLE_RISING		(1 << 6)
+#define V4L2_MBUS_PCLK_SAMPLE_FALLING		(1 << 7)
+#define V4L2_MBUS_DATA_ACTIVE_HIGH		(1 << 8)
+#define V4L2_MBUS_DATA_ACTIVE_LOW		(1 << 9)
+/* FIELD = 0/1 - Field1 (odd)/Field2 (even) */
+#define V4L2_MBUS_FIELD_EVEN_HIGH		(1 << 10)
+/* FIELD = 1/0 - Field1 (odd)/Field2 (even) */
+#define V4L2_MBUS_FIELD_EVEN_LOW		(1 << 11)
+
+/* Serial flags */
+/* How many lanes the client can use */
+#define V4L2_MBUS_CSI2_1_LANE			(1 << 0)
+#define V4L2_MBUS_CSI2_2_LANE			(1 << 1)
+#define V4L2_MBUS_CSI2_3_LANE			(1 << 2)
+#define V4L2_MBUS_CSI2_4_LANE			(1 << 3)
+/* On which channels it can send video data */
+#define V4L2_MBUS_CSI2_CHANNEL_0		(1 << 4)
+#define V4L2_MBUS_CSI2_CHANNEL_1		(1 << 5)
+#define V4L2_MBUS_CSI2_CHANNEL_2		(1 << 6)
+#define V4L2_MBUS_CSI2_CHANNEL_3		(1 << 7)
+/* Does it support only continuous or also non-continuous clock mode */
+#define V4L2_MBUS_CSI2_CONTINUOUS_CLOCK		(1 << 8)
+#define V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK	(1 << 9)
+
+#define V4L2_MBUS_CSI2_LANES		(V4L2_MBUS_CSI2_1_LANE | V4L2_MBUS_CSI2_2_LANE | \
+					 V4L2_MBUS_CSI2_3_LANE | V4L2_MBUS_CSI2_4_LANE)
+#define V4L2_MBUS_CSI2_CHANNELS		(V4L2_MBUS_CSI2_CHANNEL_0 | V4L2_MBUS_CSI2_CHANNEL_1 | \
+					 V4L2_MBUS_CSI2_CHANNEL_2 | V4L2_MBUS_CSI2_CHANNEL_3)
+
+/**
+ * v4l2_mbus_type - media bus type
+ * @V4L2_MBUS_PARALLEL:	parallel interface with hsync and vsync
+ * @V4L2_MBUS_BT656:	parallel interface with embedded synchronisation, can
+ *			also be used for BT.1120
+ * @V4L2_MBUS_CSI2:	MIPI CSI-2 serial interface
+ */
+enum v4l2_mbus_type {
+	V4L2_MBUS_PARALLEL,
+	V4L2_MBUS_BT656,
+	V4L2_MBUS_CSI2,
+};
+
+/**
+ * v4l2_mbus_config - media bus configuration
+ * @type:	in: interface type
+ * @flags:	in / out: configuration flags, depending on @type
+ */
+struct v4l2_mbus_config {
+	enum v4l2_mbus_type type;
+	unsigned int flags;
+};
+
+static inline void v4l2_fill_pix_format(struct v4l2_pix_format *pix_fmt,
+				const struct v4l2_mbus_framefmt *mbus_fmt)
+{
+	pix_fmt->width = mbus_fmt->width;
+	pix_fmt->height = mbus_fmt->height;
+	pix_fmt->field = mbus_fmt->field;
+	pix_fmt->colorspace = mbus_fmt->colorspace;
+}
+
+static inline void v4l2_fill_mbus_format(struct v4l2_mbus_framefmt *mbus_fmt,
+			   const struct v4l2_pix_format *pix_fmt,
+			   enum v4l2_mbus_pixelcode code)
+{
+	mbus_fmt->width = pix_fmt->width;
+	mbus_fmt->height = pix_fmt->height;
+	mbus_fmt->field = pix_fmt->field;
+	mbus_fmt->colorspace = pix_fmt->colorspace;
+	mbus_fmt->code = code;
+}
+
+#endif
diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h
new file mode 100644
index 00000000..16ac4733
--- /dev/null
+++ b/include/media/v4l2-mem2mem.h
@@ -0,0 +1,215 @@
+/*
+ * Memory-to-memory device framework for Video for Linux 2.
+ *
+ * Helper functions for devices that use memory buffers for both source
+ * and destination.
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * Pawel Osciak, <pawel@osciak.com>
+ * Marek Szyprowski, <m.szyprowski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version
+ */
+
+#ifndef _MEDIA_V4L2_MEM2MEM_H
+#define _MEDIA_V4L2_MEM2MEM_H
+
+#include <media/videobuf2-core.h>
+
+/**
+ * struct v4l2_m2m_ops - mem-to-mem device driver callbacks
+ * @device_run:	required. Begin the actual job (transaction) inside this
+ *		callback.
+ *		The job does NOT have to end before this callback returns
+ *		(and it will be the usual case). When the job finishes,
+ *		v4l2_m2m_job_finish() has to be called.
+ * @job_ready:	optional. Should return 0 if the driver does not have a job
+ *		fully prepared to run yet (i.e. it will not be able to finish a
+ *		transaction without sleeping). If not provided, it will be
+ *		assumed that one source and one destination buffer are all
+ *		that is required for the driver to perform one full transaction.
+ *		This method may not sleep.
+ * @job_abort:	required. Informs the driver that it has to abort the currently
+ *		running transaction as soon as possible (i.e. as soon as it can
+ *		stop the device safely; e.g. in the next interrupt handler),
+ *		even if the transaction would not have been finished by then.
+ *		After the driver performs the necessary steps, it has to call
+ *		v4l2_m2m_job_finish() (as if the transaction ended normally).
+ *		This function does not have to (and will usually not) wait
+ *		until the device enters a state when it can be stopped.
+ */
+struct v4l2_m2m_ops {
+	void (*device_run)(void *priv);
+	int (*job_ready)(void *priv);
+	void (*job_abort)(void *priv);
+	void (*lock)(void *priv);
+	void (*unlock)(void *priv);
+};
+
+struct v4l2_m2m_dev;
+
+struct v4l2_m2m_queue_ctx {
+/* private: internal use only */
+	struct vb2_queue	q;
+
+	/* Queue for buffers ready to be processed as soon as this
+	 * instance receives access to the device */
+	struct list_head	rdy_queue;
+	spinlock_t		rdy_spinlock;
+	u8			num_rdy;
+};
+
+struct v4l2_m2m_ctx {
+/* private: internal use only */
+	struct v4l2_m2m_dev		*m2m_dev;
+
+	/* Capture (output to memory) queue context */
+	struct v4l2_m2m_queue_ctx	cap_q_ctx;
+
+	/* Output (input from memory) queue context */
+	struct v4l2_m2m_queue_ctx	out_q_ctx;
+
+	/* For device job queue */
+	struct list_head		queue;
+	unsigned long			job_flags;
+	wait_queue_head_t		finished;
+
+	/* Instance private data */
+	void				*priv;
+};
+
+struct v4l2_m2m_buffer {
+	struct vb2_buffer	vb;
+	struct list_head	list;
+};
+
+void *v4l2_m2m_get_curr_priv(struct v4l2_m2m_dev *m2m_dev);
+
+struct vb2_queue *v4l2_m2m_get_vq(struct v4l2_m2m_ctx *m2m_ctx,
+				       enum v4l2_buf_type type);
+
+void v4l2_m2m_job_finish(struct v4l2_m2m_dev *m2m_dev,
+			 struct v4l2_m2m_ctx *m2m_ctx);
+
+static inline void
+v4l2_m2m_buf_done(struct vb2_buffer *buf, enum vb2_buffer_state state)
+{
+	vb2_buffer_done(buf, state);
+}
+
+int v4l2_m2m_reqbufs(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
+		     struct v4l2_requestbuffers *reqbufs);
+
+int v4l2_m2m_querybuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
+		      struct v4l2_buffer *buf);
+
+int v4l2_m2m_qbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
+		  struct v4l2_buffer *buf);
+int v4l2_m2m_dqbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
+		   struct v4l2_buffer *buf);
+
+int v4l2_m2m_streamon(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
+		      enum v4l2_buf_type type);
+int v4l2_m2m_streamoff(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
+		       enum v4l2_buf_type type);
+
+unsigned int v4l2_m2m_poll(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
+			   struct poll_table_struct *wait);
+
+int v4l2_m2m_mmap(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
+		  struct vm_area_struct *vma);
+
+struct v4l2_m2m_dev *v4l2_m2m_init(struct v4l2_m2m_ops *m2m_ops);
+void v4l2_m2m_release(struct v4l2_m2m_dev *m2m_dev);
+
+struct v4l2_m2m_ctx *v4l2_m2m_ctx_init(struct v4l2_m2m_dev *m2m_dev,
+		void *drv_priv,
+		int (*queue_init)(void *priv, struct vb2_queue *src_vq, struct vb2_queue *dst_vq));
+
+void v4l2_m2m_ctx_release(struct v4l2_m2m_ctx *m2m_ctx);
+
+void v4l2_m2m_buf_queue(struct v4l2_m2m_ctx *m2m_ctx, struct vb2_buffer *vb);
+
+/**
+ * v4l2_m2m_num_src_bufs_ready() - return the number of source buffers ready for
+ * use
+ */
+static inline
+unsigned int v4l2_m2m_num_src_bufs_ready(struct v4l2_m2m_ctx *m2m_ctx)
+{
+	return m2m_ctx->cap_q_ctx.num_rdy;
+}
+
+/**
+ * v4l2_m2m_num_src_bufs_ready() - return the number of destination buffers
+ * ready for use
+ */
+static inline
+unsigned int v4l2_m2m_num_dst_bufs_ready(struct v4l2_m2m_ctx *m2m_ctx)
+{
+	return m2m_ctx->out_q_ctx.num_rdy;
+}
+
+void *v4l2_m2m_next_buf(struct v4l2_m2m_queue_ctx *q_ctx);
+
+/**
+ * v4l2_m2m_next_src_buf() - return next source buffer from the list of ready
+ * buffers
+ */
+static inline void *v4l2_m2m_next_src_buf(struct v4l2_m2m_ctx *m2m_ctx)
+{
+	return v4l2_m2m_next_buf(&m2m_ctx->out_q_ctx);
+}
+
+/**
+ * v4l2_m2m_next_dst_buf() - return next destination buffer from the list of
+ * ready buffers
+ */
+static inline void *v4l2_m2m_next_dst_buf(struct v4l2_m2m_ctx *m2m_ctx)
+{
+	return v4l2_m2m_next_buf(&m2m_ctx->cap_q_ctx);
+}
+
+/**
+ * v4l2_m2m_get_src_vq() - return vb2_queue for source buffers
+ */
+static inline
+struct vb2_queue *v4l2_m2m_get_src_vq(struct v4l2_m2m_ctx *m2m_ctx)
+{
+	return &m2m_ctx->out_q_ctx.q;
+}
+
+/**
+ * v4l2_m2m_get_dst_vq() - return vb2_queue for destination buffers
+ */
+static inline
+struct vb2_queue *v4l2_m2m_get_dst_vq(struct v4l2_m2m_ctx *m2m_ctx)
+{
+	return &m2m_ctx->cap_q_ctx.q;
+}
+
+void *v4l2_m2m_buf_remove(struct v4l2_m2m_queue_ctx *q_ctx);
+
+/**
+ * v4l2_m2m_src_buf_remove() - take off a source buffer from the list of ready
+ * buffers and return it
+ */
+static inline void *v4l2_m2m_src_buf_remove(struct v4l2_m2m_ctx *m2m_ctx)
+{
+	return v4l2_m2m_buf_remove(&m2m_ctx->out_q_ctx);
+}
+
+/**
+ * v4l2_m2m_dst_buf_remove() - take off a destination buffer from the list of
+ * ready buffers and return it
+ */
+static inline void *v4l2_m2m_dst_buf_remove(struct v4l2_m2m_ctx *m2m_ctx)
+{
+	return v4l2_m2m_buf_remove(&m2m_ctx->cap_q_ctx);
+}
+
+#endif /* _MEDIA_V4L2_MEM2MEM_H */
+
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
new file mode 100644
index 00000000..f0f3358d
--- /dev/null
+++ b/include/media/v4l2-subdev.h
@@ -0,0 +1,613 @@
+/*
+    V4L2 sub-device support header.
+
+    Copyright (C) 2008  Hans Verkuil <hverkuil@xs4all.nl>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _V4L2_SUBDEV_H
+#define _V4L2_SUBDEV_H
+
+#include <linux/v4l2-subdev.h>
+#include <media/media-entity.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-mediabus.h>
+
+/* generic v4l2_device notify callback notification values */
+#define V4L2_SUBDEV_IR_RX_NOTIFY		_IOW('v', 0, u32)
+#define V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ	0x00000001
+#define V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED	0x00000002
+#define V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN	0x00000004
+#define V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN	0x00000008
+
+#define V4L2_SUBDEV_IR_TX_NOTIFY		_IOW('v', 1, u32)
+#define V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ	0x00000001
+
+struct v4l2_device;
+struct v4l2_ctrl_handler;
+struct v4l2_event_subscription;
+struct v4l2_fh;
+struct v4l2_subdev;
+struct v4l2_subdev_fh;
+struct tuner_setup;
+
+/* decode_vbi_line */
+struct v4l2_decode_vbi_line {
+	u32 is_second_field;	/* Set to 0 for the first (odd) field,
+				   set to 1 for the second (even) field. */
+	u8 *p; 			/* Pointer to the sliced VBI data from the decoder.
+				   On exit points to the start of the payload. */
+	u32 line;		/* Line number of the sliced VBI data (1-23) */
+	u32 type;		/* VBI service type (V4L2_SLICED_*). 0 if no service found */
+};
+
+/* Sub-devices are devices that are connected somehow to the main bridge
+   device. These devices are usually audio/video muxers/encoders/decoders or
+   sensors and webcam controllers.
+
+   Usually these devices are controlled through an i2c bus, but other busses
+   may also be used.
+
+   The v4l2_subdev struct provides a way of accessing these devices in a
+   generic manner. Most operations that these sub-devices support fall in
+   a few categories: core ops, audio ops, video ops and tuner ops.
+
+   More categories can be added if needed, although this should remain a
+   limited set (no more than approx. 8 categories).
+
+   Each category has its own set of ops that subdev drivers can implement.
+
+   A subdev driver can leave the pointer to the category ops NULL if
+   it does not implement them (e.g. an audio subdev will generally not
+   implement the video category ops). The exception is the core category:
+   this must always be present.
+
+   These ops are all used internally so it is no problem to change, remove
+   or add ops or move ops from one to another category. Currently these
+   ops are based on the original ioctls, but since ops are not limited to
+   one argument there is room for improvement here once all i2c subdev
+   drivers are converted to use these ops.
+ */
+
+/* Core ops: it is highly recommended to implement at least these ops:
+
+   g_chip_ident
+   log_status
+   g_register
+   s_register
+
+   This provides basic debugging support.
+
+   The ioctl ops is meant for generic ioctl-like commands. Depending on
+   the use-case it might be better to use subdev-specific ops (currently
+   not yet implemented) since ops provide proper type-checking.
+ */
+
+/* Subdevice external IO pin configuration */
+#define V4L2_SUBDEV_IO_PIN_DISABLE	(1 << 0) /* ENABLE assumed */
+#define V4L2_SUBDEV_IO_PIN_OUTPUT	(1 << 1)
+#define V4L2_SUBDEV_IO_PIN_INPUT	(1 << 2)
+#define V4L2_SUBDEV_IO_PIN_SET_VALUE	(1 << 3) /* Set output value */
+#define V4L2_SUBDEV_IO_PIN_ACTIVE_LOW	(1 << 4) /* ACTIVE HIGH assumed */
+
+struct v4l2_subdev_io_pin_config {
+	u32 flags;	/* V4L2_SUBDEV_IO_PIN_* flags for this pin's config */
+	u8 pin;		/* Chip external IO pin to configure */
+	u8 function;	/* Internal signal pad/function to route to IO pin */
+	u8 value;	/* Initial value for pin - e.g. GPIO output value */
+	u8 strength;	/* Pin drive strength */
+};
+
+/*
+   s_io_pin_config: configure one or more chip I/O pins for chips that
+	multiplex different internal signal pads out to IO pins.  This function
+	takes a pointer to an array of 'n' pin configuration entries, one for
+	each pin being configured.  This function could be called at times
+	other than just subdevice initialization.
+
+   init: initialize the sensor registors to some sort of reasonable default
+	values. Do not use for new drivers and should be removed in existing
+	drivers.
+
+   load_fw: load firmware.
+
+   reset: generic reset command. The argument selects which subsystems to
+	reset. Passing 0 will always reset the whole chip. Do not use for new
+	drivers without discussing this first on the linux-media mailinglist.
+	There should be no reason normally to reset a device.
+
+   s_gpio: set GPIO pins. Very simple right now, might need to be extended with
+	a direction argument if needed.
+
+   s_power: puts subdevice in power saving mode (on == 0) or normal operation
+	mode (on == 1).
+
+   interrupt_service_routine: Called by the bridge chip's interrupt service
+	handler, when an interrupt status has be raised due to this subdev,
+	so that this subdev can handle the details.  It may schedule work to be
+	performed later.  It must not sleep.  *Called from an IRQ context*.
+ */
+struct v4l2_subdev_core_ops {
+	int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip);
+	int (*log_status)(struct v4l2_subdev *sd);
+	int (*s_io_pin_config)(struct v4l2_subdev *sd, size_t n,
+				      struct v4l2_subdev_io_pin_config *pincfg);
+	int (*init)(struct v4l2_subdev *sd, u32 val);
+	int (*load_fw)(struct v4l2_subdev *sd);
+	int (*reset)(struct v4l2_subdev *sd, u32 val);
+	int (*s_gpio)(struct v4l2_subdev *sd, u32 val);
+	int (*queryctrl)(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc);
+	int (*g_ctrl)(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
+	int (*s_ctrl)(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
+	int (*g_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls);
+	int (*s_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls);
+	int (*try_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls);
+	int (*querymenu)(struct v4l2_subdev *sd, struct v4l2_querymenu *qm);
+	int (*g_std)(struct v4l2_subdev *sd, v4l2_std_id *norm);
+	int (*s_std)(struct v4l2_subdev *sd, v4l2_std_id norm);
+	long (*ioctl)(struct v4l2_subdev *sd, unsigned int cmd, void *arg);
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	int (*g_register)(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg);
+	int (*s_register)(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg);
+#endif
+	int (*s_power)(struct v4l2_subdev *sd, int on);
+	int (*interrupt_service_routine)(struct v4l2_subdev *sd,
+						u32 status, bool *handled);
+	int (*subscribe_event)(struct v4l2_subdev *sd, struct v4l2_fh *fh,
+			       struct v4l2_event_subscription *sub);
+	int (*unsubscribe_event)(struct v4l2_subdev *sd, struct v4l2_fh *fh,
+				 struct v4l2_event_subscription *sub);
+};
+
+/* s_radio: v4l device was opened in radio mode.
+
+   g_frequency: freq->type must be filled in. Normally done by video_ioctl2
+	or the bridge driver.
+
+   g_tuner:
+   s_tuner: vt->type must be filled in. Normally done by video_ioctl2 or the
+	bridge driver.
+
+   s_type_addr: sets tuner type and its I2C addr.
+
+   s_config: sets tda9887 specific stuff, like port1, port2 and qss
+ */
+struct v4l2_subdev_tuner_ops {
+	int (*s_radio)(struct v4l2_subdev *sd);
+	int (*s_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq);
+	int (*g_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq);
+	int (*g_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt);
+	int (*s_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt);
+	int (*g_modulator)(struct v4l2_subdev *sd, struct v4l2_modulator *vm);
+	int (*s_modulator)(struct v4l2_subdev *sd, struct v4l2_modulator *vm);
+	int (*s_type_addr)(struct v4l2_subdev *sd, struct tuner_setup *type);
+	int (*s_config)(struct v4l2_subdev *sd, const struct v4l2_priv_tun_config *config);
+};
+
+/* s_clock_freq: set the frequency (in Hz) of the audio clock output.
+	Used to slave an audio processor to the video decoder, ensuring that
+	audio and video remain synchronized. Usual values for the frequency
+	are 48000, 44100 or 32000 Hz. If the frequency is not supported, then
+	-EINVAL is returned.
+
+   s_i2s_clock_freq: sets I2S speed in bps. This is used to provide a standard
+	way to select I2S clock used by driving digital audio streams at some
+	board designs. Usual values for the frequency are 1024000 and 2048000.
+	If the frequency is not supported, then -EINVAL is returned.
+
+   s_routing: used to define the input and/or output pins of an audio chip,
+	and any additional configuration data.
+	Never attempt to use user-level input IDs (e.g. Composite, S-Video,
+	Tuner) at this level. An i2c device shouldn't know about whether an
+	input pin is connected to a Composite connector, become on another
+	board or platform it might be connected to something else entirely.
+	The calling driver is responsible for mapping a user-level input to
+	the right pins on the i2c device.
+ */
+struct v4l2_subdev_audio_ops {
+	int (*s_clock_freq)(struct v4l2_subdev *sd, u32 freq);
+	int (*s_i2s_clock_freq)(struct v4l2_subdev *sd, u32 freq);
+	int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config);
+	int (*s_stream)(struct v4l2_subdev *sd, int enable);
+};
+
+/*
+   s_std_output: set v4l2_std_id for video OUTPUT devices. This is ignored by
+	video input devices.
+
+   g_std_output: get current standard for video OUTPUT devices. This is ignored
+	by video input devices.
+
+   g_tvnorms_output: get v4l2_std_id with all standards supported by video
+	OUTPUT device. This is ignored by video input devices.
+
+   s_crystal_freq: sets the frequency of the crystal used to generate the
+	clocks in Hz. An extra flags field allows device specific configuration
+	regarding clock frequency dividers, etc. If not used, then set flags
+	to 0. If the frequency is not supported, then -EINVAL is returned.
+
+   g_input_status: get input status. Same as the status field in the v4l2_input
+	struct.
+
+   s_routing: see s_routing in audio_ops, except this version is for video
+	devices.
+
+   s_dv_preset: set dv (Digital Video) preset in the sub device. Similar to
+	s_std()
+
+   g_dv_preset: get current dv (Digital Video) preset in the sub device.
+
+   query_dv_preset: query dv preset in the sub device. This is similar to
+	querystd()
+
+   s_dv_timings(): Set custom dv timings in the sub device. This is used
+	when sub device is capable of setting detailed timing information
+	in the hardware to generate/detect the video signal.
+
+   g_dv_timings(): Get custom dv timings in the sub device.
+
+   enum_mbus_fmt: enumerate pixel formats, provided by a video data source
+
+   g_mbus_fmt: get the current pixel format, provided by a video data source
+
+   try_mbus_fmt: try to set a pixel format on a video data source
+
+   s_mbus_fmt: set a pixel format on a video data source
+
+   g_mbus_config: get supported mediabus configurations
+
+   s_mbus_config: set a certain mediabus configuration. This operation is added
+	for compatibility with soc-camera drivers and should not be used by new
+	software.
+ */
+struct v4l2_subdev_video_ops {
+	int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config);
+	int (*s_crystal_freq)(struct v4l2_subdev *sd, u32 freq, u32 flags);
+	int (*s_std_output)(struct v4l2_subdev *sd, v4l2_std_id std);
+	int (*g_std_output)(struct v4l2_subdev *sd, v4l2_std_id *std);
+	int (*querystd)(struct v4l2_subdev *sd, v4l2_std_id *std);
+	int (*g_tvnorms_output)(struct v4l2_subdev *sd, v4l2_std_id *std);
+	int (*g_input_status)(struct v4l2_subdev *sd, u32 *status);
+	int (*s_stream)(struct v4l2_subdev *sd, int enable);
+	int (*cropcap)(struct v4l2_subdev *sd, struct v4l2_cropcap *cc);
+	int (*g_crop)(struct v4l2_subdev *sd, struct v4l2_crop *crop);
+	int (*s_crop)(struct v4l2_subdev *sd, struct v4l2_crop *crop);
+	int (*g_parm)(struct v4l2_subdev *sd, struct v4l2_streamparm *param);
+	int (*s_parm)(struct v4l2_subdev *sd, struct v4l2_streamparm *param);
+	int (*g_frame_interval)(struct v4l2_subdev *sd,
+				struct v4l2_subdev_frame_interval *interval);
+	int (*s_frame_interval)(struct v4l2_subdev *sd,
+				struct v4l2_subdev_frame_interval *interval);
+	int (*enum_framesizes)(struct v4l2_subdev *sd, struct v4l2_frmsizeenum *fsize);
+	int (*enum_frameintervals)(struct v4l2_subdev *sd, struct v4l2_frmivalenum *fival);
+	int (*enum_dv_presets) (struct v4l2_subdev *sd,
+			struct v4l2_dv_enum_preset *preset);
+	int (*s_dv_preset)(struct v4l2_subdev *sd,
+			struct v4l2_dv_preset *preset);
+	int (*g_dv_preset)(struct v4l2_subdev *sd,
+			struct v4l2_dv_preset *preset);
+	int (*query_dv_preset)(struct v4l2_subdev *sd,
+			struct v4l2_dv_preset *preset);
+	int (*s_dv_timings)(struct v4l2_subdev *sd,
+			struct v4l2_dv_timings *timings);
+	int (*g_dv_timings)(struct v4l2_subdev *sd,
+			struct v4l2_dv_timings *timings);
+	int (*enum_mbus_fmt)(struct v4l2_subdev *sd, unsigned int index,
+			     enum v4l2_mbus_pixelcode *code);
+	int (*enum_mbus_fsizes)(struct v4l2_subdev *sd,
+			     struct v4l2_frmsizeenum *fsize);
+	int (*g_mbus_fmt)(struct v4l2_subdev *sd,
+			  struct v4l2_mbus_framefmt *fmt);
+	int (*try_mbus_fmt)(struct v4l2_subdev *sd,
+			    struct v4l2_mbus_framefmt *fmt);
+	int (*s_mbus_fmt)(struct v4l2_subdev *sd,
+			  struct v4l2_mbus_framefmt *fmt);
+	int (*g_mbus_config)(struct v4l2_subdev *sd,
+			     struct v4l2_mbus_config *cfg);
+	int (*s_mbus_config)(struct v4l2_subdev *sd,
+			     const struct v4l2_mbus_config *cfg);
+};
+
+/*
+   decode_vbi_line: video decoders that support sliced VBI need to implement
+	this ioctl. Field p of the v4l2_sliced_vbi_line struct is set to the
+	start of the VBI data that was generated by the decoder. The driver
+	then parses the sliced VBI data and sets the other fields in the
+	struct accordingly. The pointer p is updated to point to the start of
+	the payload which can be copied verbatim into the data field of the
+	v4l2_sliced_vbi_data struct. If no valid VBI data was found, then the
+	type field is set to 0 on return.
+
+   s_vbi_data: used to generate VBI signals on a video signal.
+	v4l2_sliced_vbi_data is filled with the data packets that should be
+	output. Note that if you set the line field to 0, then that VBI signal
+	is disabled. If no valid VBI data was found, then the type field is
+	set to 0 on return.
+
+   g_vbi_data: used to obtain the sliced VBI packet from a readback register.
+	Not all video decoders support this. If no data is available because
+	the readback register contains invalid or erroneous data -EIO is
+	returned. Note that you must fill in the 'id' member and the 'field'
+	member (to determine whether CC data from the first or second field
+	should be obtained).
+
+   s_raw_fmt: setup the video encoder/decoder for raw VBI.
+
+   g_sliced_fmt: retrieve the current sliced VBI settings.
+
+   s_sliced_fmt: setup the sliced VBI settings.
+ */
+struct v4l2_subdev_vbi_ops {
+	int (*decode_vbi_line)(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi_line);
+	int (*s_vbi_data)(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *vbi_data);
+	int (*g_vbi_data)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_data *vbi_data);
+	int (*g_sliced_vbi_cap)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_cap *cap);
+	int (*s_raw_fmt)(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt);
+	int (*g_sliced_fmt)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt);
+	int (*s_sliced_fmt)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt);
+};
+
+/**
+ * struct v4l2_subdev_sensor_ops - v4l2-subdev sensor operations
+ * @g_skip_top_lines: number of lines at the top of the image to be skipped.
+ *		      This is needed for some sensors, which always corrupt
+ *		      several top lines of the output image, or which send their
+ *		      metadata in them.
+ * @g_skip_frames: number of frames to skip at stream start. This is needed for
+ *		   buggy sensors that generate faulty frames when they are
+ *		   turned on.
+ */
+struct v4l2_subdev_sensor_ops {
+	int (*g_skip_top_lines)(struct v4l2_subdev *sd, u32 *lines);
+	int (*g_skip_frames)(struct v4l2_subdev *sd, u32 *frames);
+};
+
+/*
+   [rt]x_g_parameters: Get the current operating parameters and state of the
+	the IR receiver or transmitter.
+
+   [rt]x_s_parameters: Set the current operating parameters and state of the
+	the IR receiver or transmitter.  It is recommended to call
+	[rt]x_g_parameters first to fill out the current state, and only change
+	the fields that need to be changed.  Upon return, the actual device
+	operating parameters and state will be returned.  Note that hardware
+	limitations may prevent the actual settings from matching the requested
+	settings - e.g. an actual carrier setting of 35,904 Hz when 36,000 Hz
+	was requested.  An exception is when the shutdown parameter is true.
+	The last used operational parameters will be returned, but the actual
+	state of the hardware be different to minimize power consumption and
+	processing when shutdown is true.
+
+   rx_read: Reads received codes or pulse width data.
+	The semantics are similar to a non-blocking read() call.
+
+   tx_write: Writes codes or pulse width data for transmission.
+	The semantics are similar to a non-blocking write() call.
+ */
+
+enum v4l2_subdev_ir_mode {
+	V4L2_SUBDEV_IR_MODE_PULSE_WIDTH, /* uses struct ir_raw_event records */
+};
+
+struct v4l2_subdev_ir_parameters {
+	/* Either Rx or Tx */
+	unsigned int bytes_per_data_element; /* of data in read or write call */
+	enum v4l2_subdev_ir_mode mode;
+
+	bool enable;
+	bool interrupt_enable;
+	bool shutdown; /* true: set hardware to low/no power, false: normal */
+
+	bool modulation;           /* true: uses carrier, false: baseband */
+	u32 max_pulse_width;       /* ns,      valid only for baseband signal */
+	unsigned int carrier_freq; /* Hz,      valid only for modulated signal*/
+	unsigned int duty_cycle;   /* percent, valid only for modulated signal*/
+	bool invert_level;	   /* invert signal level */
+
+	/* Tx only */
+	bool invert_carrier_sense; /* Send 0/space as a carrier burst */
+
+	/* Rx only */
+	u32 noise_filter_min_width;       /* ns, min time of a valid pulse */
+	unsigned int carrier_range_lower; /* Hz, valid only for modulated sig */
+	unsigned int carrier_range_upper; /* Hz, valid only for modulated sig */
+	u32 resolution;                   /* ns */
+};
+
+struct v4l2_subdev_ir_ops {
+	/* Receiver */
+	int (*rx_read)(struct v4l2_subdev *sd, u8 *buf, size_t count,
+				ssize_t *num);
+
+	int (*rx_g_parameters)(struct v4l2_subdev *sd,
+				struct v4l2_subdev_ir_parameters *params);
+	int (*rx_s_parameters)(struct v4l2_subdev *sd,
+				struct v4l2_subdev_ir_parameters *params);
+
+	/* Transmitter */
+	int (*tx_write)(struct v4l2_subdev *sd, u8 *buf, size_t count,
+				ssize_t *num);
+
+	int (*tx_g_parameters)(struct v4l2_subdev *sd,
+				struct v4l2_subdev_ir_parameters *params);
+	int (*tx_s_parameters)(struct v4l2_subdev *sd,
+				struct v4l2_subdev_ir_parameters *params);
+};
+
+struct v4l2_subdev_pad_ops {
+	int (*enum_mbus_code)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			      struct v4l2_subdev_mbus_code_enum *code);
+	int (*enum_frame_size)(struct v4l2_subdev *sd,
+			       struct v4l2_subdev_fh *fh,
+			       struct v4l2_subdev_frame_size_enum *fse);
+	int (*enum_frame_interval)(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_fh *fh,
+				   struct v4l2_subdev_frame_interval_enum *fie);
+	int (*get_fmt)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+		       struct v4l2_subdev_format *format);
+	int (*set_fmt)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+		       struct v4l2_subdev_format *format);
+	int (*set_crop)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+		       struct v4l2_subdev_crop *crop);
+	int (*get_crop)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+		       struct v4l2_subdev_crop *crop);
+};
+
+struct v4l2_subdev_ops {
+	const struct v4l2_subdev_core_ops	*core;
+	const struct v4l2_subdev_tuner_ops	*tuner;
+	const struct v4l2_subdev_audio_ops	*audio;
+	const struct v4l2_subdev_video_ops	*video;
+	const struct v4l2_subdev_vbi_ops	*vbi;
+	const struct v4l2_subdev_ir_ops		*ir;
+	const struct v4l2_subdev_sensor_ops	*sensor;
+	const struct v4l2_subdev_pad_ops	*pad;
+};
+
+/*
+ * Internal ops. Never call this from drivers, only the v4l2 framework can call
+ * these ops.
+ *
+ * registered: called when this subdev is registered. When called the v4l2_dev
+ *	field is set to the correct v4l2_device.
+ *
+ * unregistered: called when this subdev is unregistered. When called the
+ *	v4l2_dev field is still set to the correct v4l2_device.
+ *
+ * open: called when the subdev device node is opened by an application.
+ *
+ * close: called when the subdev device node is closed.
+ */
+struct v4l2_subdev_internal_ops {
+	int (*registered)(struct v4l2_subdev *sd);
+	void (*unregistered)(struct v4l2_subdev *sd);
+	int (*open)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh);
+	int (*close)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh);
+};
+
+#define V4L2_SUBDEV_NAME_SIZE 32
+
+/* Set this flag if this subdev is a i2c device. */
+#define V4L2_SUBDEV_FL_IS_I2C			(1U << 0)
+/* Set this flag if this subdev is a spi device. */
+#define V4L2_SUBDEV_FL_IS_SPI			(1U << 1)
+/* Set this flag if this subdev needs a device node. */
+#define V4L2_SUBDEV_FL_HAS_DEVNODE		(1U << 2)
+/* Set this flag if this subdev generates events. */
+#define V4L2_SUBDEV_FL_HAS_EVENTS		(1U << 3)
+
+/* Each instance of a subdev driver should create this struct, either
+   stand-alone or embedded in a larger struct.
+ */
+struct v4l2_subdev {
+#if defined(CONFIG_MEDIA_CONTROLLER)
+	struct media_entity entity;
+#endif
+	struct list_head list;
+	struct module *owner;
+	u32 flags;
+	struct v4l2_device *v4l2_dev;
+	const struct v4l2_subdev_ops *ops;
+	/* Never call these internal ops from within a driver! */
+	const struct v4l2_subdev_internal_ops *internal_ops;
+	/* The control handler of this subdev. May be NULL. */
+	struct v4l2_ctrl_handler *ctrl_handler;
+	/* name must be unique */
+	char name[V4L2_SUBDEV_NAME_SIZE];
+	/* can be used to group similar subdevs, value is driver-specific */
+	u32 grp_id;
+	/* pointer to private data */
+	void *dev_priv;
+	void *host_priv;
+	/* subdev device node */
+	struct video_device *devnode;
+};
+
+#define media_entity_to_v4l2_subdev(ent) \
+	container_of(ent, struct v4l2_subdev, entity)
+#define vdev_to_v4l2_subdev(vdev) \
+	video_get_drvdata(vdev)
+
+/*
+ * Used for storing subdev information per file handle
+ */
+struct v4l2_subdev_fh {
+	struct v4l2_fh vfh;
+#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API)
+	struct v4l2_mbus_framefmt *try_fmt;
+	struct v4l2_rect *try_crop;
+#endif
+};
+
+#define to_v4l2_subdev_fh(fh)	\
+	container_of(fh, struct v4l2_subdev_fh, vfh)
+
+#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API)
+static inline struct v4l2_mbus_framefmt *
+v4l2_subdev_get_try_format(struct v4l2_subdev_fh *fh, unsigned int pad)
+{
+	return &fh->try_fmt[pad];
+}
+
+static inline struct v4l2_rect *
+v4l2_subdev_get_try_crop(struct v4l2_subdev_fh *fh, unsigned int pad)
+{
+	return &fh->try_crop[pad];
+}
+#endif
+
+extern const struct v4l2_file_operations v4l2_subdev_fops;
+
+static inline void v4l2_set_subdevdata(struct v4l2_subdev *sd, void *p)
+{
+	sd->dev_priv = p;
+}
+
+static inline void *v4l2_get_subdevdata(const struct v4l2_subdev *sd)
+{
+	return sd->dev_priv;
+}
+
+static inline void v4l2_set_subdev_hostdata(struct v4l2_subdev *sd, void *p)
+{
+	sd->host_priv = p;
+}
+
+static inline void *v4l2_get_subdev_hostdata(const struct v4l2_subdev *sd)
+{
+	return sd->host_priv;
+}
+
+void v4l2_subdev_init(struct v4l2_subdev *sd,
+		      const struct v4l2_subdev_ops *ops);
+
+/* Call an ops of a v4l2_subdev, doing the right checks against
+   NULL pointers.
+
+   Example: err = v4l2_subdev_call(sd, core, g_chip_ident, &chip);
+ */
+#define v4l2_subdev_call(sd, o, f, args...)				\
+	(!(sd) ? -ENODEV : (((sd)->ops->o && (sd)->ops->o->f) ?	\
+		(sd)->ops->o->f((sd) , ##args) : -ENOIOCTLCMD))
+
+/* Send a notification to v4l2_device. */
+#define v4l2_subdev_notify(sd, notification, arg)			   \
+	((!(sd) || !(sd)->v4l2_dev || !(sd)->v4l2_dev->notify) ? -ENODEV : \
+	 (sd)->v4l2_dev->notify((sd), (notification), (arg)))
+
+#endif
diff --git a/include/media/videobuf-core.h b/include/media/videobuf-core.h
new file mode 100644
index 00000000..90ed895e
--- /dev/null
+++ b/include/media/videobuf-core.h
@@ -0,0 +1,238 @@
+/*
+ * generic helper functions for handling video4linux capture buffers
+ *
+ * (c) 2007 Mauro Carvalho Chehab, <mchehab@infradead.org>
+ *
+ * Highly based on video-buf written originally by:
+ * (c) 2001,02 Gerd Knorr <kraxel@bytesex.org>
+ * (c) 2006 Mauro Carvalho Chehab, <mchehab@infradead.org>
+ * (c) 2006 Ted Walther and John Sokol
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2
+ */
+
+#ifndef _VIDEOBUF_CORE_H
+#define _VIDEOBUF_CORE_H
+
+#include <linux/poll.h>
+#include <linux/videodev2.h>
+
+#define UNSET (-1U)
+
+
+struct videobuf_buffer;
+struct videobuf_queue;
+
+/* --------------------------------------------------------------------- */
+
+/*
+ * A small set of helper functions to manage video4linux buffers.
+ *
+ * struct videobuf_buffer holds the data structures used by the helper
+ * functions, additionally some commonly used fields for v4l buffers
+ * (width, height, lists, waitqueue) are in there.  That struct should
+ * be used as first element in the drivers buffer struct.
+ *
+ * about the mmap helpers (videobuf_mmap_*):
+ *
+ * The mmaper function allows to map any subset of contingous buffers.
+ * This includes one mmap() call for all buffers (which the original
+ * video4linux API uses) as well as one mmap() for every single buffer
+ * (which v4l2 uses).
+ *
+ * If there is a valid mapping for a buffer, buffer->baddr/bsize holds
+ * userspace address + size which can be feeded into the
+ * videobuf_dma_init_user function listed above.
+ *
+ */
+
+struct videobuf_mapping {
+	unsigned int count;
+	struct videobuf_queue *q;
+};
+
+enum videobuf_state {
+	VIDEOBUF_NEEDS_INIT = 0,
+	VIDEOBUF_PREPARED   = 1,
+	VIDEOBUF_QUEUED     = 2,
+	VIDEOBUF_ACTIVE     = 3,
+	VIDEOBUF_DONE       = 4,
+	VIDEOBUF_ERROR      = 5,
+	VIDEOBUF_IDLE       = 6,
+};
+
+struct videobuf_buffer {
+	unsigned int            i;
+	u32                     magic;
+
+	/* info about the buffer */
+	unsigned int            width;
+	unsigned int            height;
+	unsigned int            bytesperline; /* use only if != 0 */
+	unsigned long           size;
+	unsigned int            input;
+	enum v4l2_field         field;
+	enum videobuf_state     state;
+	struct list_head        stream;  /* QBUF/DQBUF list */
+
+	/* touched by irq handler */
+	struct list_head        queue;
+	wait_queue_head_t       done;
+	unsigned int            field_count;
+	struct timeval          ts;
+
+	/* Memory type */
+	enum v4l2_memory        memory;
+
+	/* buffer size */
+	size_t                  bsize;
+
+	/* buffer offset (mmap + overlay) */
+	size_t                  boff;
+
+	/* buffer addr (userland ptr!) */
+	unsigned long           baddr;
+
+	/* for mmap'ed buffers */
+	struct videobuf_mapping *map;
+
+	/* Private pointer to allow specific methods to store their data */
+	int			privsize;
+	void                    *priv;
+};
+
+struct videobuf_queue_ops {
+	int (*buf_setup)(struct videobuf_queue *q,
+			 unsigned int *count, unsigned int *size);
+	int (*buf_prepare)(struct videobuf_queue *q,
+			   struct videobuf_buffer *vb,
+			   enum v4l2_field field);
+	void (*buf_queue)(struct videobuf_queue *q,
+			  struct videobuf_buffer *vb);
+	void (*buf_release)(struct videobuf_queue *q,
+			    struct videobuf_buffer *vb);
+};
+
+#define MAGIC_QTYPE_OPS	0x12261003
+
+/* Helper operations - device type dependent */
+struct videobuf_qtype_ops {
+	u32                     magic;
+
+	struct videobuf_buffer *(*alloc_vb)(size_t size);
+	void *(*vaddr)		(struct videobuf_buffer *buf);
+	int (*iolock)		(struct videobuf_queue *q,
+				 struct videobuf_buffer *vb,
+				 struct v4l2_framebuffer *fbuf);
+	int (*sync)		(struct videobuf_queue *q,
+				 struct videobuf_buffer *buf);
+	int (*mmap_mapper)	(struct videobuf_queue *q,
+				 struct videobuf_buffer *buf,
+				 struct vm_area_struct *vma);
+};
+
+struct videobuf_queue {
+	struct mutex               vb_lock;
+	struct mutex               *ext_lock;
+	spinlock_t                 *irqlock;
+	struct device		   *dev;
+
+	wait_queue_head_t	   wait; /* wait if queue is empty */
+
+	enum v4l2_buf_type         type;
+	unsigned int               inputs; /* for V4L2_BUF_FLAG_INPUT */
+	unsigned int               msize;
+	enum v4l2_field            field;
+	enum v4l2_field            last;   /* for field=V4L2_FIELD_ALTERNATE */
+	struct videobuf_buffer     *bufs[VIDEO_MAX_FRAME];
+	const struct videobuf_queue_ops  *ops;
+	struct videobuf_qtype_ops  *int_ops;
+
+	unsigned int               streaming:1;
+	unsigned int               reading:1;
+
+	/* capture via mmap() + ioctl(QBUF/DQBUF) */
+	struct list_head           stream;
+
+	/* capture via read() */
+	unsigned int               read_off;
+	struct videobuf_buffer     *read_buf;
+
+	/* driver private data */
+	void                       *priv_data;
+};
+
+static inline void videobuf_queue_lock(struct videobuf_queue *q)
+{
+	if (!q->ext_lock)
+		mutex_lock(&q->vb_lock);
+}
+
+static inline void videobuf_queue_unlock(struct videobuf_queue *q)
+{
+	if (!q->ext_lock)
+		mutex_unlock(&q->vb_lock);
+}
+
+int videobuf_waiton(struct videobuf_queue *q, struct videobuf_buffer *vb,
+		int non_blocking, int intr);
+int videobuf_iolock(struct videobuf_queue *q, struct videobuf_buffer *vb,
+		struct v4l2_framebuffer *fbuf);
+
+struct videobuf_buffer *videobuf_alloc_vb(struct videobuf_queue *q);
+
+/* Used on videobuf-dvb */
+void *videobuf_queue_to_vaddr(struct videobuf_queue *q,
+			      struct videobuf_buffer *buf);
+
+void videobuf_queue_core_init(struct videobuf_queue *q,
+			 const struct videobuf_queue_ops *ops,
+			 struct device *dev,
+			 spinlock_t *irqlock,
+			 enum v4l2_buf_type type,
+			 enum v4l2_field field,
+			 unsigned int msize,
+			 void *priv,
+			 struct videobuf_qtype_ops *int_ops,
+			 struct mutex *ext_lock);
+int  videobuf_queue_is_busy(struct videobuf_queue *q);
+void videobuf_queue_cancel(struct videobuf_queue *q);
+
+enum v4l2_field videobuf_next_field(struct videobuf_queue *q);
+int videobuf_reqbufs(struct videobuf_queue *q,
+		     struct v4l2_requestbuffers *req);
+int videobuf_querybuf(struct videobuf_queue *q, struct v4l2_buffer *b);
+int videobuf_qbuf(struct videobuf_queue *q,
+		  struct v4l2_buffer *b);
+int videobuf_dqbuf(struct videobuf_queue *q,
+		   struct v4l2_buffer *b, int nonblocking);
+int videobuf_streamon(struct videobuf_queue *q);
+int videobuf_streamoff(struct videobuf_queue *q);
+
+void videobuf_stop(struct videobuf_queue *q);
+
+int videobuf_read_start(struct videobuf_queue *q);
+void videobuf_read_stop(struct videobuf_queue *q);
+ssize_t videobuf_read_stream(struct videobuf_queue *q,
+			     char __user *data, size_t count, loff_t *ppos,
+			     int vbihack, int nonblocking);
+ssize_t videobuf_read_one(struct videobuf_queue *q,
+			  char __user *data, size_t count, loff_t *ppos,
+			  int nonblocking);
+unsigned int videobuf_poll_stream(struct file *file,
+				  struct videobuf_queue *q,
+				  poll_table *wait);
+
+int videobuf_mmap_setup(struct videobuf_queue *q,
+			unsigned int bcount, unsigned int bsize,
+			enum v4l2_memory memory);
+int __videobuf_mmap_setup(struct videobuf_queue *q,
+			unsigned int bcount, unsigned int bsize,
+			enum v4l2_memory memory);
+int videobuf_mmap_free(struct videobuf_queue *q);
+int videobuf_mmap_mapper(struct videobuf_queue *q,
+			 struct vm_area_struct *vma);
+
+#endif
diff --git a/include/media/videobuf-dma-contig.h b/include/media/videobuf-dma-contig.h
new file mode 100644
index 00000000..f0ed8254
--- /dev/null
+++ b/include/media/videobuf-dma-contig.h
@@ -0,0 +1,33 @@
+/*
+ * helper functions for physically contiguous capture buffers
+ *
+ * The functions support hardware lacking scatter gather support
+ * (i.e. the buffers must be linear in physical memory)
+ *
+ * Copyright (c) 2008 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2
+ */
+#ifndef _VIDEOBUF_DMA_CONTIG_H
+#define _VIDEOBUF_DMA_CONTIG_H
+
+#include <linux/dma-mapping.h>
+#include <media/videobuf-core.h>
+
+void videobuf_queue_dma_contig_init(struct videobuf_queue *q,
+				    const struct videobuf_queue_ops *ops,
+				    struct device *dev,
+				    spinlock_t *irqlock,
+				    enum v4l2_buf_type type,
+				    enum v4l2_field field,
+				    unsigned int msize,
+				    void *priv,
+				    struct mutex *ext_lock);
+
+dma_addr_t videobuf_to_dma_contig(struct videobuf_buffer *buf);
+void videobuf_dma_contig_free(struct videobuf_queue *q,
+			      struct videobuf_buffer *buf);
+
+#endif /* _VIDEOBUF_DMA_CONTIG_H */
diff --git a/include/media/videobuf-dma-sg.h b/include/media/videobuf-dma-sg.h
new file mode 100644
index 00000000..d8fb6012
--- /dev/null
+++ b/include/media/videobuf-dma-sg.h
@@ -0,0 +1,110 @@
+/*
+ * helper functions for SG DMA video4linux capture buffers
+ *
+ * The functions expect the hardware being able to scatter gather
+ * (i.e. the buffers are not linear in physical memory, but fragmented
+ * into PAGE_SIZE chunks).  They also assume the driver does not need
+ * to touch the video data.
+ *
+ * (c) 2007 Mauro Carvalho Chehab, <mchehab@infradead.org>
+ *
+ * Highly based on video-buf written originally by:
+ * (c) 2001,02 Gerd Knorr <kraxel@bytesex.org>
+ * (c) 2006 Mauro Carvalho Chehab, <mchehab@infradead.org>
+ * (c) 2006 Ted Walther and John Sokol
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2
+ */
+#ifndef _VIDEOBUF_DMA_SG_H
+#define _VIDEOBUF_DMA_SG_H
+
+#include <media/videobuf-core.h>
+
+/* --------------------------------------------------------------------- */
+
+/*
+ * A small set of helper functions to manage buffers (both userland
+ * and kernel) for DMA.
+ *
+ * videobuf_dma_init_*()
+ *	creates a buffer.  The userland version takes a userspace
+ *	pointer + length.  The kernel version just wants the size and
+ *	does memory allocation too using vmalloc_32().
+ *
+ * videobuf_dma_*()
+ *	see Documentation/DMA-API-HOWTO.txt, these functions to
+ *	basically the same.  The map function does also build a
+ *	scatterlist for the buffer (and unmap frees it ...)
+ *
+ * videobuf_dma_free()
+ *	no comment ...
+ *
+ */
+
+struct videobuf_dmabuf {
+	u32                 magic;
+
+	/* for userland buffer */
+	int                 offset;
+	size_t		    size;
+	struct page         **pages;
+
+	/* for kernel buffers */
+	void                *vaddr;
+
+	/* for overlay buffers (pci-pci dma) */
+	dma_addr_t          bus_addr;
+
+	/* common */
+	struct scatterlist  *sglist;
+	int                 sglen;
+	int                 nr_pages;
+	int                 direction;
+};
+
+struct videobuf_dma_sg_memory {
+	u32                 magic;
+
+	/* for mmap'ed buffers */
+	struct videobuf_dmabuf  dma;
+};
+
+/*
+ * Scatter-gather DMA buffer API.
+ *
+ * These functions provide a simple way to create a page list and a
+ * scatter-gather list from a kernel, userspace of physical address and map the
+ * memory for DMA operation.
+ *
+ * Despite the name, this is totally unrelated to videobuf, except that
+ * videobuf-dma-sg uses the same API internally.
+ */
+void videobuf_dma_init(struct videobuf_dmabuf *dma);
+int videobuf_dma_init_user(struct videobuf_dmabuf *dma, int direction,
+			   unsigned long data, unsigned long size);
+int videobuf_dma_init_kernel(struct videobuf_dmabuf *dma, int direction,
+			     int nr_pages);
+int videobuf_dma_init_overlay(struct videobuf_dmabuf *dma, int direction,
+			      dma_addr_t addr, int nr_pages);
+int videobuf_dma_free(struct videobuf_dmabuf *dma);
+
+int videobuf_dma_map(struct device *dev, struct videobuf_dmabuf *dma);
+int videobuf_dma_unmap(struct device *dev, struct videobuf_dmabuf *dma);
+struct videobuf_dmabuf *videobuf_to_dma(struct videobuf_buffer *buf);
+
+void *videobuf_sg_alloc(size_t size);
+
+void videobuf_queue_sg_init(struct videobuf_queue *q,
+			 const struct videobuf_queue_ops *ops,
+			 struct device *dev,
+			 spinlock_t *irqlock,
+			 enum v4l2_buf_type type,
+			 enum v4l2_field field,
+			 unsigned int msize,
+			 void *priv,
+			 struct mutex *ext_lock);
+
+#endif /* _VIDEOBUF_DMA_SG_H */
+
diff --git a/include/media/videobuf-dvb.h b/include/media/videobuf-dvb.h
new file mode 100644
index 00000000..bf365721
--- /dev/null
+++ b/include/media/videobuf-dvb.h
@@ -0,0 +1,66 @@
+#include <dvbdev.h>
+#include <dmxdev.h>
+#include <dvb_demux.h>
+#include <dvb_net.h>
+#include <dvb_frontend.h>
+
+#ifndef _VIDEOBUF_DVB_H_
+#define	_VIDEOBUF_DVB_H_
+
+struct videobuf_dvb {
+	/* filling that the job of the driver */
+	char                       *name;
+	struct dvb_frontend        *frontend;
+	struct videobuf_queue      dvbq;
+
+	/* video-buf-dvb state info */
+	struct mutex               lock;
+	struct task_struct         *thread;
+	int                        nfeeds;
+
+	/* videobuf_dvb_(un)register manges this */
+	struct dvb_demux           demux;
+	struct dmxdev              dmxdev;
+	struct dmx_frontend        fe_hw;
+	struct dmx_frontend        fe_mem;
+	struct dvb_net             net;
+};
+
+struct videobuf_dvb_frontend {
+	struct list_head felist;
+	int id;
+	struct videobuf_dvb dvb;
+};
+
+struct videobuf_dvb_frontends {
+	struct list_head felist;
+	struct mutex lock;
+	struct dvb_adapter adapter;
+	int active_fe_id; /* Indicates which frontend in the felist is in use */
+	int gate; /* Frontend with gate control 0=!MFE,1=fe0,2=fe1 etc */
+};
+
+int videobuf_dvb_register_bus(struct videobuf_dvb_frontends *f,
+			  struct module *module,
+			  void *adapter_priv,
+			  struct device *device,
+			  short *adapter_nr,
+			  int mfe_shared,
+			  int (*fe_ioctl_override)(struct dvb_frontend *,
+					unsigned int, void *, unsigned int));
+
+void videobuf_dvb_unregister_bus(struct videobuf_dvb_frontends *f);
+
+struct videobuf_dvb_frontend * videobuf_dvb_alloc_frontend(struct videobuf_dvb_frontends *f, int id);
+void videobuf_dvb_dealloc_frontends(struct videobuf_dvb_frontends *f);
+
+struct videobuf_dvb_frontend * videobuf_dvb_get_frontend(struct videobuf_dvb_frontends *f, int id);
+int videobuf_dvb_find_frontend(struct videobuf_dvb_frontends *f, struct dvb_frontend *p);
+
+#endif			/* _VIDEOBUF_DVB_H_ */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/include/media/videobuf-vmalloc.h b/include/media/videobuf-vmalloc.h
new file mode 100644
index 00000000..486a97ef
--- /dev/null
+++ b/include/media/videobuf-vmalloc.h
@@ -0,0 +1,46 @@
+/*
+ * helper functions for vmalloc capture buffers
+ *
+ * The functions expect the hardware being able to scatter gather
+ * (i.e. the buffers are not linear in physical memory, but fragmented
+ * into PAGE_SIZE chunks).  They also assume the driver does not need
+ * to touch the video data.
+ *
+ * (c) 2007 Mauro Carvalho Chehab, <mchehab@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2
+ */
+#ifndef _VIDEOBUF_VMALLOC_H
+#define _VIDEOBUF_VMALLOC_H
+
+#include <media/videobuf-core.h>
+
+/* --------------------------------------------------------------------- */
+
+struct videobuf_vmalloc_memory {
+	u32                 magic;
+
+	void                *vaddr;
+
+	/* remap_vmalloc_range seems to need to run
+	 * after mmap() on some cases */
+	struct vm_area_struct *vma;
+};
+
+void videobuf_queue_vmalloc_init(struct videobuf_queue *q,
+			 const struct videobuf_queue_ops *ops,
+			 struct device *dev,
+			 spinlock_t *irqlock,
+			 enum v4l2_buf_type type,
+			 enum v4l2_field field,
+			 unsigned int msize,
+			 void *priv,
+			 struct mutex *ext_lock);
+
+void *videobuf_to_vmalloc(struct videobuf_buffer *buf);
+
+void videobuf_vmalloc_free(struct videobuf_buffer *buf);
+
+#endif
diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h
new file mode 100644
index 00000000..a15d1f1b
--- /dev/null
+++ b/include/media/videobuf2-core.h
@@ -0,0 +1,407 @@
+/*
+ * videobuf2-core.h - V4L2 driver helper framework
+ *
+ * Copyright (C) 2010 Samsung Electronics
+ *
+ * Author: Pawel Osciak <pawel@osciak.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ */
+#ifndef _MEDIA_VIDEOBUF2_CORE_H
+#define _MEDIA_VIDEOBUF2_CORE_H
+
+#include <linux/mm_types.h>
+#include <linux/mutex.h>
+#include <linux/poll.h>
+#include <linux/videodev2.h>
+
+struct vb2_alloc_ctx;
+struct vb2_fileio_data;
+
+/**
+ * struct vb2_mem_ops - memory handling/memory allocator operations
+ * @alloc:	allocate video memory and, optionally, allocator private data,
+ *		return NULL on failure or a pointer to allocator private,
+ *		per-buffer data on success; the returned private structure
+ *		will then be passed as buf_priv argument to other ops in this
+ *		structure
+ * @put:	inform the allocator that the buffer will no longer be used;
+ *		usually will result in the allocator freeing the buffer (if
+ *		no other users of this buffer are present); the buf_priv
+ *		argument is the allocator private per-buffer structure
+ *		previously returned from the alloc callback
+ * @get_userptr: acquire userspace memory for a hardware operation; used for
+ *		 USERPTR memory types; vaddr is the address passed to the
+ *		 videobuf layer when queuing a video buffer of USERPTR type;
+ *		 should return an allocator private per-buffer structure
+ *		 associated with the buffer on success, NULL on failure;
+ *		 the returned private structure will then be passed as buf_priv
+ *		 argument to other ops in this structure
+ * @put_userptr: inform the allocator that a USERPTR buffer will no longer
+ *		 be used
+ * @vaddr:	return a kernel virtual address to a given memory buffer
+ *		associated with the passed private structure or NULL if no
+ *		such mapping exists
+ * @cookie:	return allocator specific cookie for a given memory buffer
+ *		associated with the passed private structure or NULL if not
+ *		available
+ * @num_users:	return the current number of users of a memory buffer;
+ *		return 1 if the videobuf layer (or actually the driver using
+ *		it) is the only user
+ * @mmap:	setup a userspace mapping for a given memory buffer under
+ *		the provided virtual memory region
+ *
+ * Required ops for USERPTR types: get_userptr, put_userptr.
+ * Required ops for MMAP types: alloc, put, num_users, mmap.
+ * Required ops for read/write access types: alloc, put, num_users, vaddr
+ */
+struct vb2_mem_ops {
+	void		*(*alloc)(void *alloc_ctx, unsigned long size);
+	void		(*put)(void *buf_priv);
+
+	void		*(*get_userptr)(void *alloc_ctx, unsigned long vaddr,
+					unsigned long size, int write);
+	void		(*put_userptr)(void *buf_priv);
+
+	void		*(*vaddr)(void *buf_priv);
+	void		*(*cookie)(void *buf_priv);
+
+	unsigned int	(*num_users)(void *buf_priv);
+
+	int		(*mmap)(void *buf_priv, struct vm_area_struct *vma);
+};
+
+struct vb2_plane {
+	void			*mem_priv;
+};
+
+/**
+ * enum vb2_io_modes - queue access methods
+ * @VB2_MMAP:		driver supports MMAP with streaming API
+ * @VB2_USERPTR:	driver supports USERPTR with streaming API
+ * @VB2_READ:		driver supports read() style access
+ * @VB2_WRITE:		driver supports write() style access
+ */
+enum vb2_io_modes {
+	VB2_MMAP	= (1 << 0),
+	VB2_USERPTR	= (1 << 1),
+	VB2_READ	= (1 << 2),
+	VB2_WRITE	= (1 << 3),
+};
+
+/**
+ * enum vb2_fileio_flags - flags for selecting a mode of the file io emulator,
+ * by default the 'streaming' style is used by the file io emulator
+ * @VB2_FILEIO_READ_ONCE:	report EOF after reading the first buffer
+ * @VB2_FILEIO_WRITE_IMMEDIATELY:	queue buffer after each write() call
+ */
+enum vb2_fileio_flags {
+	VB2_FILEIO_READ_ONCE		= (1 << 0),
+	VB2_FILEIO_WRITE_IMMEDIATELY	= (1 << 1),
+};
+
+/**
+ * enum vb2_buffer_state - current video buffer state
+ * @VB2_BUF_STATE_DEQUEUED:	buffer under userspace control
+ * @VB2_BUF_STATE_PREPARED:	buffer prepared in videobuf and by the driver
+ * @VB2_BUF_STATE_QUEUED:	buffer queued in videobuf, but not in driver
+ * @VB2_BUF_STATE_ACTIVE:	buffer queued in driver and possibly used
+ *				in a hardware operation
+ * @VB2_BUF_STATE_DONE:		buffer returned from driver to videobuf, but
+ *				not yet dequeued to userspace
+ * @VB2_BUF_STATE_ERROR:	same as above, but the operation on the buffer
+ *				has ended with an error, which will be reported
+ *				to the userspace when it is dequeued
+ */
+enum vb2_buffer_state {
+	VB2_BUF_STATE_DEQUEUED,
+	VB2_BUF_STATE_PREPARED,
+	VB2_BUF_STATE_QUEUED,
+	VB2_BUF_STATE_ACTIVE,
+	VB2_BUF_STATE_DONE,
+	VB2_BUF_STATE_ERROR,
+};
+
+struct vb2_queue;
+
+/**
+ * struct vb2_buffer - represents a video buffer
+ * @v4l2_buf:		struct v4l2_buffer associated with this buffer; can
+ *			be read by the driver and relevant entries can be
+ *			changed by the driver in case of CAPTURE types
+ *			(such as timestamp)
+ * @v4l2_planes:	struct v4l2_planes associated with this buffer; can
+ *			be read by the driver and relevant entries can be
+ *			changed by the driver in case of CAPTURE types
+ *			(such as bytesused); NOTE that even for single-planar
+ *			types, the v4l2_planes[0] struct should be used
+ *			instead of v4l2_buf for filling bytesused - drivers
+ *			should use the vb2_set_plane_payload() function for that
+ * @vb2_queue:		the queue to which this driver belongs
+ * @num_planes:		number of planes in the buffer
+ *			on an internal driver queue
+ * @state:		current buffer state; do not change
+ * @queued_entry:	entry on the queued buffers list, which holds all
+ *			buffers queued from userspace
+ * @done_entry:		entry on the list that stores all buffers ready to
+ *			be dequeued to userspace
+ * @planes:		private per-plane information; do not change
+ */
+struct vb2_buffer {
+	struct v4l2_buffer	v4l2_buf;
+	struct v4l2_plane	v4l2_planes[VIDEO_MAX_PLANES];
+
+	struct vb2_queue	*vb2_queue;
+
+	unsigned int		num_planes;
+
+/* Private: internal use only */
+	enum vb2_buffer_state	state;
+
+	struct list_head	queued_entry;
+	struct list_head	done_entry;
+
+	struct vb2_plane	planes[VIDEO_MAX_PLANES];
+};
+
+/**
+ * struct vb2_ops - driver-specific callbacks
+ *
+ * @queue_setup:	called from VIDIOC_REQBUFS and VIDIOC_CREATE_BUFS
+ *			handlers before memory allocation, or, if
+ *			*num_planes != 0, after the allocation to verify a
+ *			smaller number of buffers. Driver should return
+ *			the required number of buffers in *num_buffers, the
+ *			required number of planes per buffer in *num_planes; the
+ *			size of each plane should be set in the sizes[] array
+ *			and optional per-plane allocator specific context in the
+ *			alloc_ctxs[] array. When called from VIDIOC_REQBUFS,
+ *			fmt == NULL, the driver has to use the currently
+ *			configured format and *num_buffers is the total number
+ *			of buffers, that are being allocated. When called from
+ *			VIDIOC_CREATE_BUFS, fmt != NULL and it describes the
+ *			target frame format. In this case *num_buffers are being
+ *			allocated additionally to q->num_buffers.
+ * @wait_prepare:	release any locks taken while calling vb2 functions;
+ *			it is called before an ioctl needs to wait for a new
+ *			buffer to arrive; required to avoid a deadlock in
+ *			blocking access type
+ * @wait_finish:	reacquire all locks released in the previous callback;
+ *			required to continue operation after sleeping while
+ *			waiting for a new buffer to arrive
+ * @buf_init:		called once after allocating a buffer (in MMAP case)
+ *			or after acquiring a new USERPTR buffer; drivers may
+ *			perform additional buffer-related initialization;
+ *			initialization failure (return != 0) will prevent
+ *			queue setup from completing successfully; optional
+ * @buf_prepare:	called every time the buffer is queued from userspace
+ *			and from the VIDIOC_PREPARE_BUF ioctl; drivers may
+ *			perform any initialization required before each hardware
+ *			operation in this callback; if an error is returned, the
+ *			buffer will not be queued in driver; optional
+ * @buf_finish:		called before every dequeue of the buffer back to
+ *			userspace; drivers may perform any operations required
+ *			before userspace accesses the buffer; optional
+ * @buf_cleanup:	called once before the buffer is freed; drivers may
+ *			perform any additional cleanup; optional
+ * @start_streaming:	called once to enter 'streaming' state; the driver may
+ *			receive buffers with @buf_queue callback before
+ *			@start_streaming is called; the driver gets the number
+ *			of already queued buffers in count parameter; driver
+ *			can return an error if hardware fails or not enough
+ *			buffers has been queued, in such case all buffers that
+ *			have been already given by the @buf_queue callback are
+ *			invalidated.
+ * @stop_streaming:	called when 'streaming' state must be disabled; driver
+ *			should stop any DMA transactions or wait until they
+ *			finish and give back all buffers it got from buf_queue()
+ *			callback; may use vb2_wait_for_all_buffers() function
+ * @buf_queue:		passes buffer vb to the driver; driver may start
+ *			hardware operation on this buffer; driver should give
+ *			the buffer back by calling vb2_buffer_done() function;
+ *			it is allways called after calling STREAMON ioctl;
+ *			might be called before start_streaming callback if user
+ *			pre-queued buffers before calling STREAMON
+ */
+struct vb2_ops {
+	int (*queue_setup)(struct vb2_queue *q, const struct v4l2_format *fmt,
+			   unsigned int *num_buffers, unsigned int *num_planes,
+			   unsigned int sizes[], void *alloc_ctxs[]);
+
+	void (*wait_prepare)(struct vb2_queue *q);
+	void (*wait_finish)(struct vb2_queue *q);
+
+	int (*buf_init)(struct vb2_buffer *vb);
+	int (*buf_prepare)(struct vb2_buffer *vb);
+	int (*buf_finish)(struct vb2_buffer *vb);
+	void (*buf_cleanup)(struct vb2_buffer *vb);
+
+	int (*start_streaming)(struct vb2_queue *q, unsigned int count);
+	int (*stop_streaming)(struct vb2_queue *q);
+
+	void (*buf_queue)(struct vb2_buffer *vb);
+};
+
+/**
+ * struct vb2_queue - a videobuf queue
+ *
+ * @type:	queue type (see V4L2_BUF_TYPE_* in linux/videodev2.h
+ * @io_modes:	supported io methods (see vb2_io_modes enum)
+ * @io_flags:	additional io flags (see vb2_fileio_flags enum)
+ * @ops:	driver-specific callbacks
+ * @mem_ops:	memory allocator specific callbacks
+ * @drv_priv:	driver private data
+ * @buf_struct_size: size of the driver-specific buffer structure;
+ *		"0" indicates the driver doesn't want to use a custom buffer
+ *		structure type, so sizeof(struct vb2_buffer) will is used
+ *
+ * @memory:	current memory type used
+ * @bufs:	videobuf buffer structures
+ * @num_buffers: number of allocated/used buffers
+ * @queued_list: list of buffers currently queued from userspace
+ * @queued_count: number of buffers owned by the driver
+ * @done_list:	list of buffers ready to be dequeued to userspace
+ * @done_lock:	lock to protect done_list list
+ * @done_wq:	waitqueue for processes waiting for buffers ready to be dequeued
+ * @alloc_ctx:	memory type/allocator-specific contexts for each plane
+ * @streaming:	current streaming state
+ * @fileio:	file io emulator internal data, used only if emulator is active
+ */
+struct vb2_queue {
+	enum v4l2_buf_type		type;
+	unsigned int			io_modes;
+	unsigned int			io_flags;
+
+	const struct vb2_ops		*ops;
+	const struct vb2_mem_ops	*mem_ops;
+	void				*drv_priv;
+	unsigned int			buf_struct_size;
+
+/* private: internal use only */
+	enum v4l2_memory		memory;
+	struct vb2_buffer		*bufs[VIDEO_MAX_FRAME];
+	unsigned int			num_buffers;
+
+	struct list_head		queued_list;
+
+	atomic_t			queued_count;
+	struct list_head		done_list;
+	spinlock_t			done_lock;
+	wait_queue_head_t		done_wq;
+
+	void				*alloc_ctx[VIDEO_MAX_PLANES];
+	unsigned int			plane_sizes[VIDEO_MAX_PLANES];
+
+	unsigned int			streaming:1;
+
+	struct vb2_fileio_data		*fileio;
+};
+
+void *vb2_plane_vaddr(struct vb2_buffer *vb, unsigned int plane_no);
+void *vb2_plane_cookie(struct vb2_buffer *vb, unsigned int plane_no);
+
+void vb2_buffer_done(struct vb2_buffer *vb, enum vb2_buffer_state state);
+int vb2_wait_for_all_buffers(struct vb2_queue *q);
+
+int vb2_querybuf(struct vb2_queue *q, struct v4l2_buffer *b);
+int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req);
+
+int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create);
+int vb2_prepare_buf(struct vb2_queue *q, struct v4l2_buffer *b);
+
+int vb2_queue_init(struct vb2_queue *q);
+
+void vb2_queue_release(struct vb2_queue *q);
+
+int vb2_qbuf(struct vb2_queue *q, struct v4l2_buffer *b);
+int vb2_dqbuf(struct vb2_queue *q, struct v4l2_buffer *b, bool nonblocking);
+
+int vb2_streamon(struct vb2_queue *q, enum v4l2_buf_type type);
+int vb2_streamoff(struct vb2_queue *q, enum v4l2_buf_type type);
+
+int vb2_mmap(struct vb2_queue *q, struct vm_area_struct *vma);
+#ifndef CONFIG_MMU
+unsigned long vb2_get_unmapped_area(struct vb2_queue *q,
+				    unsigned long addr,
+				    unsigned long len,
+				    unsigned long pgoff,
+				    unsigned long flags);
+#endif
+unsigned int vb2_poll(struct vb2_queue *q, struct file *file, poll_table *wait);
+size_t vb2_read(struct vb2_queue *q, char __user *data, size_t count,
+		loff_t *ppos, int nonblock);
+size_t vb2_write(struct vb2_queue *q, char __user *data, size_t count,
+		loff_t *ppos, int nonblock);
+
+/**
+ * vb2_is_streaming() - return streaming status of the queue
+ * @q:		videobuf queue
+ */
+static inline bool vb2_is_streaming(struct vb2_queue *q)
+{
+	return q->streaming;
+}
+
+/**
+ * vb2_is_busy() - return busy status of the queue
+ * @q:		videobuf queue
+ *
+ * This function checks if queue has any buffers allocated.
+ */
+static inline bool vb2_is_busy(struct vb2_queue *q)
+{
+	return (q->num_buffers > 0);
+}
+
+/**
+ * vb2_get_drv_priv() - return driver private data associated with the queue
+ * @q:		videobuf queue
+ */
+static inline void *vb2_get_drv_priv(struct vb2_queue *q)
+{
+	return q->drv_priv;
+}
+
+/**
+ * vb2_set_plane_payload() - set bytesused for the plane plane_no
+ * @vb:		buffer for which plane payload should be set
+ * @plane_no:	plane number for which payload should be set
+ * @size:	payload in bytes
+ */
+static inline void vb2_set_plane_payload(struct vb2_buffer *vb,
+				 unsigned int plane_no, unsigned long size)
+{
+	if (plane_no < vb->num_planes)
+		vb->v4l2_planes[plane_no].bytesused = size;
+}
+
+/**
+ * vb2_get_plane_payload() - get bytesused for the plane plane_no
+ * @vb:		buffer for which plane payload should be set
+ * @plane_no:	plane number for which payload should be set
+ * @size:	payload in bytes
+ */
+static inline unsigned long vb2_get_plane_payload(struct vb2_buffer *vb,
+				 unsigned int plane_no)
+{
+	if (plane_no < vb->num_planes)
+		return vb->v4l2_planes[plane_no].bytesused;
+	return 0;
+}
+
+/**
+ * vb2_plane_size() - return plane size in bytes
+ * @vb:		buffer for which plane size should be returned
+ * @plane_no:	plane number for which size should be returned
+ */
+static inline unsigned long
+vb2_plane_size(struct vb2_buffer *vb, unsigned int plane_no)
+{
+	if (plane_no < vb->num_planes)
+		return vb->v4l2_planes[plane_no].length;
+	return 0;
+}
+
+#endif /* _MEDIA_VIDEOBUF2_CORE_H */
diff --git a/include/media/videobuf2-dma-contig.h b/include/media/videobuf2-dma-contig.h
new file mode 100644
index 00000000..19ae1e35
--- /dev/null
+++ b/include/media/videobuf2-dma-contig.h
@@ -0,0 +1,32 @@
+/*
+ * videobuf2-dma-coherent.h - DMA coherent memory allocator for videobuf2
+ *
+ * Copyright (C) 2010 Samsung Electronics
+ *
+ * Author: Pawel Osciak <pawel@osciak.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef _MEDIA_VIDEOBUF2_DMA_COHERENT_H
+#define _MEDIA_VIDEOBUF2_DMA_COHERENT_H
+
+#include <media/videobuf2-core.h>
+#include <linux/dma-mapping.h>
+
+static inline dma_addr_t
+vb2_dma_contig_plane_dma_addr(struct vb2_buffer *vb, unsigned int plane_no)
+{
+	dma_addr_t *addr = vb2_plane_cookie(vb, plane_no);
+
+	return *addr;
+}
+
+void *vb2_dma_contig_init_ctx(struct device *dev);
+void vb2_dma_contig_cleanup_ctx(void *alloc_ctx);
+
+extern const struct vb2_mem_ops vb2_dma_contig_memops;
+
+#endif
diff --git a/include/media/videobuf2-dma-sg.h b/include/media/videobuf2-dma-sg.h
new file mode 100644
index 00000000..0038526b
--- /dev/null
+++ b/include/media/videobuf2-dma-sg.h
@@ -0,0 +1,32 @@
+/*
+ * videobuf2-dma-sg.h - DMA scatter/gather memory allocator for videobuf2
+ *
+ * Copyright (C) 2010 Samsung Electronics
+ *
+ * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef _MEDIA_VIDEOBUF2_DMA_SG_H
+#define _MEDIA_VIDEOBUF2_DMA_SG_H
+
+#include <media/videobuf2-core.h>
+
+struct vb2_dma_sg_desc {
+	unsigned long		size;
+	unsigned int		num_pages;
+	struct scatterlist	*sglist;
+};
+
+static inline struct vb2_dma_sg_desc *vb2_dma_sg_plane_desc(
+		struct vb2_buffer *vb, unsigned int plane_no)
+{
+	return (struct vb2_dma_sg_desc *)vb2_plane_cookie(vb, plane_no);
+}
+
+extern const struct vb2_mem_ops vb2_dma_sg_memops;
+
+#endif
diff --git a/include/media/videobuf2-memops.h b/include/media/videobuf2-memops.h
new file mode 100644
index 00000000..84e1f6c0
--- /dev/null
+++ b/include/media/videobuf2-memops.h
@@ -0,0 +1,45 @@
+/*
+ * videobuf2-memops.h - generic memory handling routines for videobuf2
+ *
+ * Copyright (C) 2010 Samsung Electronics
+ *
+ * Author: Pawel Osciak <pawel@osciak.com>
+ *	   Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef _MEDIA_VIDEOBUF2_MEMOPS_H
+#define _MEDIA_VIDEOBUF2_MEMOPS_H
+
+#include <media/videobuf2-core.h>
+
+/**
+ * vb2_vmarea_handler - common vma refcount tracking handler
+ * @refcount:	pointer to refcount entry in the buffer
+ * @put:	callback to function that decreases buffer refcount
+ * @arg:	argument for @put callback
+ */
+struct vb2_vmarea_handler {
+	atomic_t		*refcount;
+	void			(*put)(void *arg);
+	void			*arg;
+};
+
+extern const struct vm_operations_struct vb2_common_vm_ops;
+
+int vb2_get_contig_userptr(unsigned long vaddr, unsigned long size,
+			   struct vm_area_struct **res_vma, dma_addr_t *res_pa);
+
+int vb2_mmap_pfn_range(struct vm_area_struct *vma, unsigned long paddr,
+				unsigned long size,
+				const struct vm_operations_struct *vm_ops,
+				void *priv);
+
+struct vm_area_struct *vb2_get_vma(struct vm_area_struct *vma);
+void vb2_put_vma(struct vm_area_struct *vma);
+
+
+#endif
diff --git a/include/media/videobuf2-vmalloc.h b/include/media/videobuf2-vmalloc.h
new file mode 100644
index 00000000..93a76b43
--- /dev/null
+++ b/include/media/videobuf2-vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ * videobuf2-vmalloc.h - vmalloc memory allocator for videobuf2
+ *
+ * Copyright (C) 2010 Samsung Electronics
+ *
+ * Author: Pawel Osciak <pawel@osciak.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef _MEDIA_VIDEOBUF2_VMALLOC_H
+#define _MEDIA_VIDEOBUF2_VMALLOC_H
+
+#include <media/videobuf2-core.h>
+
+extern const struct vb2_mem_ops vb2_vmalloc_memops;
+
+#endif
diff --git a/include/media/wm8775.h b/include/media/wm8775.h
new file mode 100644
index 00000000..d0e801a9
--- /dev/null
+++ b/include/media/wm8775.h
@@ -0,0 +1,44 @@
+/*
+    wm8775.h - definition for wm8775 inputs and outputs
+
+    Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl)
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _WM8775_H_
+#define _WM8775_H_
+
+/* The WM8775 has 4 inputs and one output. Zero or more inputs
+   are multiplexed together to the output. Hence there are
+   16 combinations.
+   If only one input is active (the normal case) then the
+   input values 1, 2, 4 or 8 should be used. */
+
+#define WM8775_AIN1 1
+#define WM8775_AIN2 2
+#define WM8775_AIN3 4
+#define WM8775_AIN4 8
+
+
+struct wm8775_platform_data {
+	/*
+	 * FIXME: Instead, we should parametrize the params
+	 * that need different settings between ivtv, pvrusb2, and Nova-S
+	 */
+	bool is_nova_s;
+};
+
+#endif
diff --git a/include/misc/altera.h b/include/misc/altera.h
new file mode 100644
index 00000000..94c0c618
--- /dev/null
+++ b/include/misc/altera.h
@@ -0,0 +1,49 @@
+/*
+ * altera.h
+ *
+ * altera FPGA driver
+ *
+ * Copyright (C) Altera Corporation 1998-2001
+ * Copyright (C) 2010 NetUP Inc.
+ * Copyright (C) 2010 Igor M. Liplianin <liplianin@netup.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _ALTERA_H_
+#define _ALTERA_H_
+
+struct altera_config {
+	void *dev;
+	u8 *action;
+	int (*jtag_io) (void *dev, int tms, int tdi, int tdo);
+};
+
+#if defined(CONFIG_ALTERA_STAPL) || \
+		(defined(CONFIG_ALTERA_STAPL_MODULE) && defined(MODULE))
+
+extern int altera_init(struct altera_config *config, const struct firmware *fw);
+#else
+
+static inline int altera_init(struct altera_config *config,
+						const struct firmware *fw)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return 0;
+}
+#endif /* CONFIG_ALTERA_STAPL */
+
+#endif /* _ALTERA_H_ */
diff --git a/include/mtd/Kbuild b/include/mtd/Kbuild
new file mode 100644
index 00000000..192f8fb7
--- /dev/null
+++ b/include/mtd/Kbuild
@@ -0,0 +1,5 @@
+header-y += inftl-user.h
+header-y += mtd-abi.h
+header-y += mtd-user.h
+header-y += nftl-user.h
+header-y += ubi-user.h
diff --git a/include/mtd/inftl-user.h b/include/mtd/inftl-user.h
new file mode 100644
index 00000000..8376bd1a
--- /dev/null
+++ b/include/mtd/inftl-user.h
@@ -0,0 +1,91 @@
+/*
+ * Parts of INFTL headers shared with userspace
+ *
+ */
+
+#ifndef __MTD_INFTL_USER_H__
+#define __MTD_INFTL_USER_H__
+
+#include <linux/types.h>
+
+#define	OSAK_VERSION	0x5120
+#define	PERCENTUSED	98
+
+#define	SECTORSIZE	512
+
+/* Block Control Information */
+
+struct inftl_bci {
+	__u8 ECCsig[6];
+	__u8 Status;
+	__u8 Status1;
+} __attribute__((packed));
+
+struct inftl_unithead1 {
+	__u16 virtualUnitNo;
+	__u16 prevUnitNo;
+	__u8 ANAC;
+	__u8 NACs;
+	__u8 parityPerField;
+	__u8 discarded;
+} __attribute__((packed));
+
+struct inftl_unithead2 {
+	__u8 parityPerField;
+	__u8 ANAC;
+	__u16 prevUnitNo;
+	__u16 virtualUnitNo;
+	__u8 NACs;
+	__u8 discarded;
+} __attribute__((packed));
+
+struct inftl_unittail {
+	__u8 Reserved[4];
+	__u16 EraseMark;
+	__u16 EraseMark1;
+} __attribute__((packed));
+
+union inftl_uci {
+	struct inftl_unithead1 a;
+	struct inftl_unithead2 b;
+	struct inftl_unittail c;
+};
+
+struct inftl_oob {
+	struct inftl_bci b;
+	union inftl_uci u;
+};
+
+
+/* INFTL Media Header */
+
+struct INFTLPartition {
+	__u32 virtualUnits;
+	__u32 firstUnit;
+	__u32 lastUnit;
+	__u32 flags;
+	__u32 spareUnits;
+	__u32 Reserved0;
+	__u32 Reserved1;
+} __attribute__((packed));
+
+struct INFTLMediaHeader {
+	char bootRecordID[8];
+	__u32 NoOfBootImageBlocks;
+	__u32 NoOfBinaryPartitions;
+	__u32 NoOfBDTLPartitions;
+	__u32 BlockMultiplierBits;
+	__u32 FormatFlags;
+	__u32 OsakVersion;
+	__u32 PercentUsed;
+	struct INFTLPartition Partitions[4];
+} __attribute__((packed));
+
+/* Partition flag types */
+#define	INFTL_BINARY	0x20000000
+#define	INFTL_BDTL	0x40000000
+#define	INFTL_LAST	0x80000000
+
+#endif /* __MTD_INFTL_USER_H__ */
+
+
diff --git a/include/mtd/mtd-abi.h b/include/mtd/mtd-abi.h
new file mode 100644
index 00000000..fd098721
--- /dev/null
+++ b/include/mtd/mtd-abi.h
@@ -0,0 +1,302 @@
+/*
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org> et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifndef __MTD_ABI_H__
+#define __MTD_ABI_H__
+
+#include <linux/types.h>
+
+struct erase_info_user {
+	__u32 start;
+	__u32 length;
+};
+
+struct erase_info_user64 {
+	__u64 start;
+	__u64 length;
+};
+
+struct mtd_oob_buf {
+	__u32 start;
+	__u32 length;
+	unsigned char __user *ptr;
+};
+
+struct mtd_oob_buf64 {
+	__u64 start;
+	__u32 pad;
+	__u32 length;
+	__u64 usr_ptr;
+};
+
+/**
+ * MTD operation modes
+ *
+ * @MTD_OPS_PLACE_OOB:	OOB data are placed at the given offset (default)
+ * @MTD_OPS_AUTO_OOB:	OOB data are automatically placed at the free areas
+ *			which are defined by the internal ecclayout
+ * @MTD_OPS_RAW:	data are transferred as-is, with no error correction;
+ *			this mode implies %MTD_OPS_PLACE_OOB
+ *
+ * These modes can be passed to ioctl(MEMWRITE) and are also used internally.
+ * See notes on "MTD file modes" for discussion on %MTD_OPS_RAW vs.
+ * %MTD_FILE_MODE_RAW.
+ */
+enum {
+	MTD_OPS_PLACE_OOB = 0,
+	MTD_OPS_AUTO_OOB = 1,
+	MTD_OPS_RAW = 2,
+};
+
+/**
+ * struct mtd_write_req - data structure for requesting a write operation
+ *
+ * @start:	start address
+ * @len:	length of data buffer
+ * @ooblen:	length of OOB buffer
+ * @usr_data:	user-provided data buffer
+ * @usr_oob:	user-provided OOB buffer
+ * @mode:	MTD mode (see "MTD operation modes")
+ * @padding:	reserved, must be set to 0
+ *
+ * This structure supports ioctl(MEMWRITE) operations, allowing data and/or OOB
+ * writes in various modes. To write to OOB-only, set @usr_data == NULL, and to
+ * write data-only, set @usr_oob == NULL. However, setting both @usr_data and
+ * @usr_oob to NULL is not allowed.
+ */
+struct mtd_write_req {
+	__u64 start;
+	__u64 len;
+	__u64 ooblen;
+	__u64 usr_data;
+	__u64 usr_oob;
+	__u8 mode;
+	__u8 padding[7];
+};
+
+#define MTD_ABSENT		0
+#define MTD_RAM			1
+#define MTD_ROM			2
+#define MTD_NORFLASH		3
+#define MTD_NANDFLASH		4
+#define MTD_DATAFLASH		6
+#define MTD_UBIVOLUME		7
+#define MTD_MLCNANDFLASH	8
+
+#define MTD_WRITEABLE		0x400	/* Device is writeable */
+#define MTD_BIT_WRITEABLE	0x800	/* Single bits can be flipped */
+#define MTD_NO_ERASE		0x1000	/* No erase necessary */
+#define MTD_POWERUP_LOCK	0x2000	/* Always locked after reset */
+
+/* Some common devices / combinations of capabilities */
+#define MTD_CAP_ROM		0
+#define MTD_CAP_RAM		(MTD_WRITEABLE | MTD_BIT_WRITEABLE | MTD_NO_ERASE)
+#define MTD_CAP_NORFLASH	(MTD_WRITEABLE | MTD_BIT_WRITEABLE)
+#define MTD_CAP_NANDFLASH	(MTD_WRITEABLE)
+
+/* Obsolete ECC byte placement modes (used with obsolete MEMGETOOBSEL) */
+#define MTD_NANDECC_OFF		0	// Switch off ECC (Not recommended)
+#define MTD_NANDECC_PLACE	1	// Use the given placement in the structure (YAFFS1 legacy mode)
+#define MTD_NANDECC_AUTOPLACE	2	// Use the default placement scheme
+#define MTD_NANDECC_PLACEONLY	3	// Use the given placement in the structure (Do not store ecc result on read)
+#define MTD_NANDECC_AUTOPL_USR 	4	// Use the given autoplacement scheme rather than using the default
+
+/* OTP mode selection */
+#define MTD_OTP_OFF		0
+#define MTD_OTP_FACTORY		1
+#define MTD_OTP_USER		2
+
+struct mtd_info_user {
+	__u8 type;
+	__u32 flags;
+	__u32 size;	/* Total size of the MTD */
+	__u32 erasesize;
+	__u32 writesize;
+	__u32 oobsize;	/* Amount of OOB data per block (e.g. 16) */
+	__u64 padding;	/* Old obsolete field; do not use */
+};
+
+struct region_info_user {
+	__u32 offset;		/* At which this region starts,
+				 * from the beginning of the MTD */
+	__u32 erasesize;	/* For this region */
+	__u32 numblocks;	/* Number of blocks in this region */
+	__u32 regionindex;
+};
+
+struct otp_info {
+	__u32 start;
+	__u32 length;
+	__u32 locked;
+};
+
+struct env_info_user {
+    char varname[200];
+    char *varpoint;
+    char varval[512];
+    int varlen;
+};
+
+enum {
+	SIGNED_IMAGE_TYPE_WLOAD,
+	SIGNED_IMAGE_TYPE_UBOOT,
+	SIGNED_IMAGE_TYPE_UBOOT_ENV,
+};
+
+struct write_signed_image {
+    int    type;
+    char * img_data;
+    int    img_len;
+    char * sig_data;
+    int    sig_len;
+    int    flags;       /* == 0 now */
+};
+/*
+ * Note, the following ioctl existed in the past and was removed:
+ * #define MEMSETOOBSEL           _IOW('M', 9, struct nand_oobinfo)
+ * Try to avoid adding a new ioctl with the same ioctl number.
+ */
+
+/* Get basic MTD characteristics info (better to use sysfs) */
+#define MEMGETINFO		_IOR('M', 1, struct mtd_info_user)
+/* Erase segment of MTD */
+#define MEMERASE		_IOW('M', 2, struct erase_info_user)
+/* Write out-of-band data from MTD */
+#define MEMWRITEOOB		_IOWR('M', 3, struct mtd_oob_buf)
+/* Read out-of-band data from MTD */
+#define MEMREADOOB		_IOWR('M', 4, struct mtd_oob_buf)
+/* Lock a chip (for MTD that supports it) */
+#define MEMLOCK			_IOW('M', 5, struct erase_info_user)
+/* Unlock a chip (for MTD that supports it) */
+#define MEMUNLOCK		_IOW('M', 6, struct erase_info_user)
+/* Get the number of different erase regions */
+#define MEMGETREGIONCOUNT	_IOR('M', 7, int)
+/* Get information about the erase region for a specific index */
+#define MEMGETREGIONINFO	_IOWR('M', 8, struct region_info_user)
+/* Get info about OOB modes (e.g., RAW, PLACE, AUTO) - legacy interface */
+#define MEMGETOOBSEL		_IOR('M', 10, struct nand_oobinfo)
+/* Check if an eraseblock is bad */
+#define MEMGETBADBLOCK		_IOW('M', 11, __kernel_loff_t)
+/* Mark an eraseblock as bad */
+#define MEMSETBADBLOCK		_IOW('M', 12, __kernel_loff_t)
+/* Set OTP (One-Time Programmable) mode (factory vs. user) */
+#define OTPSELECT		_IOR('M', 13, int)
+/* Get number of OTP (One-Time Programmable) regions */
+#define OTPGETREGIONCOUNT	_IOW('M', 14, int)
+/* Get all OTP (One-Time Programmable) info about MTD */
+#define OTPGETREGIONINFO	_IOW('M', 15, struct otp_info)
+/* Lock a given range of user data (must be in mode %MTD_FILE_MODE_OTP_USER) */
+#define OTPLOCK			_IOR('M', 16, struct otp_info)
+/* Get ECC layout (deprecated) */
+#define ECCGETLAYOUT		_IOR('M', 17, struct nand_ecclayout_user)
+/* Get statistics about corrected/uncorrected errors */
+#define ECCGETSTATS		_IOR('M', 18, struct mtd_ecc_stats)
+/* Set MTD mode on a per-file-descriptor basis (see "MTD file modes") */
+#define MTDFILEMODE		_IO('M', 19)
+/* Erase segment of MTD (supports 64-bit address) */
+#define MEMERASE64		_IOW('M', 20, struct erase_info_user64)
+/* Write data to OOB (64-bit version) */
+#define MEMWRITEOOB64		_IOWR('M', 21, struct mtd_oob_buf64)
+/* Read data from OOB (64-bit version) */
+#define MEMREADOOB64		_IOWR('M', 22, struct mtd_oob_buf64)
+/* Check if chip is locked (for MTD that supports it) */
+#define MEMISLOCKED		_IOR('M', 23, struct erase_info_user)
+/*
+ * Most generic write interface; can write in-band and/or out-of-band in various
+ * modes (see "struct mtd_write_req"). This ioctl is not supported for flashes
+ * without OOB, e.g., NOR flash.
+ */
+#define MEMWRITE		_IOWR('M', 24, struct mtd_write_req)
+#define MEMGETENV		_IOR('M', 128, struct env_info_user)
+#define MEMSETENV		_IOR('M', 129, struct env_info_user)
+#define MEM_WRITE_SIGNED_IMAGE _IOR('M', 130, struct write_signed_image)
+
+/*
+ * Obsolete legacy interface. Keep it in order not to break userspace
+ * interfaces
+ */
+struct nand_oobinfo {
+	__u32 useecc;
+	__u32 eccbytes;
+	__u32 oobfree[8][2];
+	__u32 eccpos[32];
+};
+
+struct nand_oobfree {
+	__u32 offset;
+	__u32 length;
+};
+
+#define MTD_MAX_OOBFREE_ENTRIES	8
+#define MTD_MAX_ECCPOS_ENTRIES	64
+/*
+ * OBSOLETE: ECC layout control structure. Exported to user-space via ioctl
+ * ECCGETLAYOUT for backwards compatbility and should not be mistaken as a
+ * complete set of ECC information. The ioctl truncates the larger internal
+ * structure to retain binary compatibility with the static declaration of the
+ * ioctl. Note that the "MTD_MAX_..._ENTRIES" macros represent the max size of
+ * the user struct, not the MAX size of the internal struct nand_ecclayout.
+ */
+struct nand_ecclayout_user {
+	__u32 eccbytes;
+	__u32 eccpos[MTD_MAX_ECCPOS_ENTRIES];
+	__u32 oobavail;
+	struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES];
+};
+
+/**
+ * struct mtd_ecc_stats - error correction stats
+ *
+ * @corrected:	number of corrected bits
+ * @failed:	number of uncorrectable errors
+ * @badblocks:	number of bad blocks in this partition
+ * @bbtblocks:	number of blocks reserved for bad block tables
+ */
+struct mtd_ecc_stats {
+	__u32 corrected;
+	__u32 failed;
+	__u32 badblocks;
+	__u32 bbtblocks;
+};
+
+/*
+ * MTD file modes - for read/write access to MTD
+ *
+ * @MTD_FILE_MODE_NORMAL:	OTP disabled, ECC enabled
+ * @MTD_FILE_MODE_OTP_FACTORY:	OTP enabled in factory mode
+ * @MTD_FILE_MODE_OTP_USER:	OTP enabled in user mode
+ * @MTD_FILE_MODE_RAW:		OTP disabled, ECC disabled
+ *
+ * These modes can be set via ioctl(MTDFILEMODE). The mode mode will be retained
+ * separately for each open file descriptor.
+ *
+ * Note: %MTD_FILE_MODE_RAW provides the same functionality as %MTD_OPS_RAW -
+ * raw access to the flash, without error correction or autoplacement schemes.
+ * Wherever possible, the MTD_OPS_* mode will override the MTD_FILE_MODE_* mode
+ * (e.g., when using ioctl(MEMWRITE)), but in some cases, the MTD_FILE_MODE is
+ * used out of necessity (e.g., `write()', ioctl(MEMWRITEOOB64)).
+ */
+enum mtd_file_modes {
+	MTD_FILE_MODE_NORMAL = MTD_OTP_OFF,
+	MTD_FILE_MODE_OTP_FACTORY = MTD_OTP_FACTORY,
+	MTD_FILE_MODE_OTP_USER = MTD_OTP_USER,
+	MTD_FILE_MODE_RAW,
+};
+
+#endif /* __MTD_ABI_H__ */
diff --git a/include/mtd/mtd-user.h b/include/mtd/mtd-user.h
new file mode 100644
index 00000000..d1ddd4a8
--- /dev/null
+++ b/include/mtd/mtd-user.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifndef __MTD_USER_H__
+#define __MTD_USER_H__
+
+#include <stdint.h>
+
+/* This file is blessed for inclusion by userspace */
+#include <mtd/mtd-abi.h>
+
+typedef struct mtd_info_user mtd_info_t;
+typedef struct erase_info_user erase_info_t;
+typedef struct region_info_user region_info_t;
+typedef struct nand_oobinfo nand_oobinfo_t;
+typedef struct nand_ecclayout_user nand_ecclayout_t;
+typedef struct env_info_user env_data_t;
+
+#endif /* __MTD_USER_H__ */
diff --git a/include/mtd/nftl-user.h b/include/mtd/nftl-user.h
new file mode 100644
index 00000000..bdeabd86
--- /dev/null
+++ b/include/mtd/nftl-user.h
@@ -0,0 +1,90 @@
+/*
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifndef __MTD_NFTL_USER_H__
+#define __MTD_NFTL_USER_H__
+
+#include <linux/types.h>
+
+/* Block Control Information */
+
+struct nftl_bci {
+	unsigned char ECCSig[6];
+	__u8 Status;
+	__u8 Status1;
+}__attribute__((packed));
+
+/* Unit Control Information */
+
+struct nftl_uci0 {
+	__u16 VirtUnitNum;
+	__u16 ReplUnitNum;
+	__u16 SpareVirtUnitNum;
+	__u16 SpareReplUnitNum;
+} __attribute__((packed));
+
+struct nftl_uci1 {
+	__u32 WearInfo;
+	__u16 EraseMark;
+	__u16 EraseMark1;
+} __attribute__((packed));
+
+struct nftl_uci2 {
+        __u16 FoldMark;
+        __u16 FoldMark1;
+	__u32 unused;
+} __attribute__((packed));
+
+union nftl_uci {
+	struct nftl_uci0 a;
+	struct nftl_uci1 b;
+	struct nftl_uci2 c;
+};
+
+struct nftl_oob {
+	struct nftl_bci b;
+	union nftl_uci u;
+};
+
+/* NFTL Media Header */
+
+struct NFTLMediaHeader {
+	char DataOrgID[6];
+	__u16 NumEraseUnits;
+	__u16 FirstPhysicalEUN;
+	__u32 FormattedSize;
+	unsigned char UnitSizeFactor;
+} __attribute__((packed));
+
+#define MAX_ERASE_ZONES (8192 - 512)
+
+#define ERASE_MARK 0x3c69
+#define SECTOR_FREE 0xff
+#define SECTOR_USED 0x55
+#define SECTOR_IGNORE 0x11
+#define SECTOR_DELETED 0x00
+
+#define FOLD_MARK_IN_PROGRESS 0x5555
+
+#define ZONE_GOOD 0xff
+#define ZONE_BAD_ORIGINAL 0
+#define ZONE_BAD_MARKED 7
+
+
+#endif /* __MTD_NFTL_USER_H__ */
diff --git a/include/mtd/ubi-user.h b/include/mtd/ubi-user.h
new file mode 100644
index 00000000..ae9230a9
--- /dev/null
+++ b/include/mtd/ubi-user.h
@@ -0,0 +1,415 @@
+/*
+ * Copyright © International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Artem Bityutskiy (Битюцкий Артём)
+ */
+
+#ifndef __UBI_USER_H__
+#define __UBI_USER_H__
+
+#include <linux/types.h>
+
+/*
+ * UBI device creation (the same as MTD device attachment)
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * MTD devices may be attached using %UBI_IOCATT ioctl command of the UBI
+ * control device. The caller has to properly fill and pass
+ * &struct ubi_attach_req object - UBI will attach the MTD device specified in
+ * the request and return the newly created UBI device number as the ioctl
+ * return value.
+ *
+ * UBI device deletion (the same as MTD device detachment)
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * An UBI device maybe deleted with %UBI_IOCDET ioctl command of the UBI
+ * control device.
+ *
+ * UBI volume creation
+ * ~~~~~~~~~~~~~~~~~~~
+ *
+ * UBI volumes are created via the %UBI_IOCMKVOL ioctl command of UBI character
+ * device. A &struct ubi_mkvol_req object has to be properly filled and a
+ * pointer to it has to be passed to the ioctl.
+ *
+ * UBI volume deletion
+ * ~~~~~~~~~~~~~~~~~~~
+ *
+ * To delete a volume, the %UBI_IOCRMVOL ioctl command of the UBI character
+ * device should be used. A pointer to the 32-bit volume ID hast to be passed
+ * to the ioctl.
+ *
+ * UBI volume re-size
+ * ~~~~~~~~~~~~~~~~~~
+ *
+ * To re-size a volume, the %UBI_IOCRSVOL ioctl command of the UBI character
+ * device should be used. A &struct ubi_rsvol_req object has to be properly
+ * filled and a pointer to it has to be passed to the ioctl.
+ *
+ * UBI volumes re-name
+ * ~~~~~~~~~~~~~~~~~~~
+ *
+ * To re-name several volumes atomically at one go, the %UBI_IOCRNVOL command
+ * of the UBI character device should be used. A &struct ubi_rnvol_req object
+ * has to be properly filled and a pointer to it has to be passed to the ioctl.
+ *
+ * UBI volume update
+ * ~~~~~~~~~~~~~~~~~
+ *
+ * Volume update should be done via the %UBI_IOCVOLUP ioctl command of the
+ * corresponding UBI volume character device. A pointer to a 64-bit update
+ * size should be passed to the ioctl. After this, UBI expects user to write
+ * this number of bytes to the volume character device. The update is finished
+ * when the claimed number of bytes is passed. So, the volume update sequence
+ * is something like:
+ *
+ * fd = open("/dev/my_volume");
+ * ioctl(fd, UBI_IOCVOLUP, &image_size);
+ * write(fd, buf, image_size);
+ * close(fd);
+ *
+ * Logical eraseblock erase
+ * ~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * To erase a logical eraseblock, the %UBI_IOCEBER ioctl command of the
+ * corresponding UBI volume character device should be used. This command
+ * unmaps the requested logical eraseblock, makes sure the corresponding
+ * physical eraseblock is successfully erased, and returns.
+ *
+ * Atomic logical eraseblock change
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * Atomic logical eraseblock change operation is called using the %UBI_IOCEBCH
+ * ioctl command of the corresponding UBI volume character device. A pointer to
+ * a &struct ubi_leb_change_req object has to be passed to the ioctl. Then the
+ * user is expected to write the requested amount of bytes (similarly to what
+ * should be done in case of the "volume update" ioctl).
+ *
+ * Logical eraseblock map
+ * ~~~~~~~~~~~~~~~~~~~~~
+ *
+ * To map a logical eraseblock to a physical eraseblock, the %UBI_IOCEBMAP
+ * ioctl command should be used. A pointer to a &struct ubi_map_req object is
+ * expected to be passed. The ioctl maps the requested logical eraseblock to
+ * a physical eraseblock and returns.  Only non-mapped logical eraseblocks can
+ * be mapped. If the logical eraseblock specified in the request is already
+ * mapped to a physical eraseblock, the ioctl fails and returns error.
+ *
+ * Logical eraseblock unmap
+ * ~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * To unmap a logical eraseblock to a physical eraseblock, the %UBI_IOCEBUNMAP
+ * ioctl command should be used. The ioctl unmaps the logical eraseblocks,
+ * schedules corresponding physical eraseblock for erasure, and returns. Unlike
+ * the "LEB erase" command, it does not wait for the physical eraseblock being
+ * erased. Note, the side effect of this is that if an unclean reboot happens
+ * after the unmap ioctl returns, you may find the LEB mapped again to the same
+ * physical eraseblock after the UBI is run again.
+ *
+ * Check if logical eraseblock is mapped
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * To check if a logical eraseblock is mapped to a physical eraseblock, the
+ * %UBI_IOCEBISMAP ioctl command should be used. It returns %0 if the LEB is
+ * not mapped, and %1 if it is mapped.
+ *
+ * Set an UBI volume property
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * To set an UBI volume property the %UBI_IOCSETPROP ioctl command should be
+ * used. A pointer to a &struct ubi_set_vol_prop_req object is expected to be
+ * passed. The object describes which property should be set, and to which value
+ * it should be set.
+ */
+
+/*
+ * When a new UBI volume or UBI device is created, users may either specify the
+ * volume/device number they want to create or to let UBI automatically assign
+ * the number using these constants.
+ */
+#define UBI_VOL_NUM_AUTO (-1)
+#define UBI_DEV_NUM_AUTO (-1)
+
+/* Maximum volume name length */
+#define UBI_MAX_VOLUME_NAME 127
+
+/* ioctl commands of UBI character devices */
+
+#define UBI_IOC_MAGIC 'o'
+
+/* Create an UBI volume */
+#define UBI_IOCMKVOL _IOW(UBI_IOC_MAGIC, 0, struct ubi_mkvol_req)
+/* Remove an UBI volume */
+#define UBI_IOCRMVOL _IOW(UBI_IOC_MAGIC, 1, __s32)
+/* Re-size an UBI volume */
+#define UBI_IOCRSVOL _IOW(UBI_IOC_MAGIC, 2, struct ubi_rsvol_req)
+/* Re-name volumes */
+#define UBI_IOCRNVOL _IOW(UBI_IOC_MAGIC, 3, struct ubi_rnvol_req)
+
+/* ioctl commands of the UBI control character device */
+
+#define UBI_CTRL_IOC_MAGIC 'o'
+
+/* Attach an MTD device */
+#define UBI_IOCATT _IOW(UBI_CTRL_IOC_MAGIC, 64, struct ubi_attach_req)
+/* Detach an MTD device */
+#define UBI_IOCDET _IOW(UBI_CTRL_IOC_MAGIC, 65, __s32)
+
+/* ioctl commands of UBI volume character devices */
+
+#define UBI_VOL_IOC_MAGIC 'O'
+
+/* Start UBI volume update */
+#define UBI_IOCVOLUP _IOW(UBI_VOL_IOC_MAGIC, 0, __s64)
+/* LEB erasure command, used for debugging, disabled by default */
+#define UBI_IOCEBER _IOW(UBI_VOL_IOC_MAGIC, 1, __s32)
+/* Atomic LEB change command */
+#define UBI_IOCEBCH _IOW(UBI_VOL_IOC_MAGIC, 2, __s32)
+/* Map LEB command */
+#define UBI_IOCEBMAP _IOW(UBI_VOL_IOC_MAGIC, 3, struct ubi_map_req)
+/* Unmap LEB command */
+#define UBI_IOCEBUNMAP _IOW(UBI_VOL_IOC_MAGIC, 4, __s32)
+/* Check if LEB is mapped command */
+#define UBI_IOCEBISMAP _IOR(UBI_VOL_IOC_MAGIC, 5, __s32)
+/* Set an UBI volume property */
+#define UBI_IOCSETVOLPROP _IOW(UBI_VOL_IOC_MAGIC, 6, \
+			       struct ubi_set_vol_prop_req)
+
+/* Maximum MTD device name length supported by UBI */
+#define MAX_UBI_MTD_NAME_LEN 127
+
+/* Maximum amount of UBI volumes that can be re-named at one go */
+#define UBI_MAX_RNVOL 32
+
+/*
+ * UBI data type hint constants.
+ *
+ * UBI_LONGTERM: long-term data
+ * UBI_SHORTTERM: short-term data
+ * UBI_UNKNOWN: data persistence is unknown
+ *
+ * These constants are used when data is written to UBI volumes in order to
+ * help the UBI wear-leveling unit to find more appropriate physical
+ * eraseblocks.
+ */
+enum {
+	UBI_LONGTERM  = 1,
+	UBI_SHORTTERM = 2,
+	UBI_UNKNOWN   = 3,
+};
+
+/*
+ * UBI volume type constants.
+ *
+ * @UBI_DYNAMIC_VOLUME: dynamic volume
+ * @UBI_STATIC_VOLUME:  static volume
+ */
+enum {
+	UBI_DYNAMIC_VOLUME = 3,
+	UBI_STATIC_VOLUME  = 4,
+};
+
+/*
+ * UBI set volume property ioctl constants.
+ *
+ * @UBI_VOL_PROP_DIRECT_WRITE: allow (any non-zero value) or disallow (value 0)
+ *                             user to directly write and erase individual
+ *                             eraseblocks on dynamic volumes
+ */
+enum {
+	UBI_VOL_PROP_DIRECT_WRITE = 1,
+};
+
+/**
+ * struct ubi_attach_req - attach MTD device request.
+ * @ubi_num: UBI device number to create
+ * @mtd_num: MTD device number to attach
+ * @vid_hdr_offset: VID header offset (use defaults if %0)
+ * @padding: reserved for future, not used, has to be zeroed
+ *
+ * This data structure is used to specify MTD device UBI has to attach and the
+ * parameters it has to use. The number which should be assigned to the new UBI
+ * device is passed in @ubi_num. UBI may automatically assign the number if
+ * @UBI_DEV_NUM_AUTO is passed. In this case, the device number is returned in
+ * @ubi_num.
+ *
+ * Most applications should pass %0 in @vid_hdr_offset to make UBI use default
+ * offset of the VID header within physical eraseblocks. The default offset is
+ * the next min. I/O unit after the EC header. For example, it will be offset
+ * 512 in case of a 512 bytes page NAND flash with no sub-page support. Or
+ * it will be 512 in case of a 2KiB page NAND flash with 4 512-byte sub-pages.
+ *
+ * But in rare cases, if this optimizes things, the VID header may be placed to
+ * a different offset. For example, the boot-loader might do things faster if
+ * the VID header sits at the end of the first 2KiB NAND page with 4 sub-pages.
+ * As the boot-loader would not normally need to read EC headers (unless it
+ * needs UBI in RW mode), it might be faster to calculate ECC. This is weird
+ * example, but it real-life example. So, in this example, @vid_hdr_offer would
+ * be 2KiB-64 bytes = 1984. Note, that this position is not even 512-bytes
+ * aligned, which is OK, as UBI is clever enough to realize this is 4th
+ * sub-page of the first page and add needed padding.
+ */
+struct ubi_attach_req {
+	__s32 ubi_num;
+	__s32 mtd_num;
+	__s32 vid_hdr_offset;
+	__s16 max_beb_per1024;
+	__s8 padding[10];
+};
+
+/**
+ * struct ubi_mkvol_req - volume description data structure used in
+ *                        volume creation requests.
+ * @vol_id: volume number
+ * @alignment: volume alignment
+ * @bytes: volume size in bytes
+ * @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
+ * @padding1: reserved for future, not used, has to be zeroed
+ * @name_len: volume name length
+ * @padding2: reserved for future, not used, has to be zeroed
+ * @name: volume name
+ *
+ * This structure is used by user-space programs when creating new volumes. The
+ * @used_bytes field is only necessary when creating static volumes.
+ *
+ * The @alignment field specifies the required alignment of the volume logical
+ * eraseblock. This means, that the size of logical eraseblocks will be aligned
+ * to this number, i.e.,
+ *	(UBI device logical eraseblock size) mod (@alignment) = 0.
+ *
+ * To put it differently, the logical eraseblock of this volume may be slightly
+ * shortened in order to make it properly aligned. The alignment has to be
+ * multiple of the flash minimal input/output unit, or %1 to utilize the entire
+ * available space of logical eraseblocks.
+ *
+ * The @alignment field may be useful, for example, when one wants to maintain
+ * a block device on top of an UBI volume. In this case, it is desirable to fit
+ * an integer number of blocks in logical eraseblocks of this UBI volume. With
+ * alignment it is possible to update this volume using plane UBI volume image
+ * BLOBs, without caring about how to properly align them.
+ */
+struct ubi_mkvol_req {
+	__s32 vol_id;
+	__s32 alignment;
+	__s64 bytes;
+	__s8 vol_type;
+	__s8 padding1;
+	__s16 name_len;
+	__s8 padding2[4];
+	char name[UBI_MAX_VOLUME_NAME + 1];
+} __packed;
+
+/**
+ * struct ubi_rsvol_req - a data structure used in volume re-size requests.
+ * @vol_id: ID of the volume to re-size
+ * @bytes: new size of the volume in bytes
+ *
+ * Re-sizing is possible for both dynamic and static volumes. But while dynamic
+ * volumes may be re-sized arbitrarily, static volumes cannot be made to be
+ * smaller than the number of bytes they bear. To arbitrarily shrink a static
+ * volume, it must be wiped out first (by means of volume update operation with
+ * zero number of bytes).
+ */
+struct ubi_rsvol_req {
+	__s64 bytes;
+	__s32 vol_id;
+} __packed;
+
+/**
+ * struct ubi_rnvol_req - volumes re-name request.
+ * @count: count of volumes to re-name
+ * @padding1:  reserved for future, not used, has to be zeroed
+ * @vol_id: ID of the volume to re-name
+ * @name_len: name length
+ * @padding2:  reserved for future, not used, has to be zeroed
+ * @name: new volume name
+ *
+ * UBI allows to re-name up to %32 volumes at one go. The count of volumes to
+ * re-name is specified in the @count field. The ID of the volumes to re-name
+ * and the new names are specified in the @vol_id and @name fields.
+ *
+ * The UBI volume re-name operation is atomic, which means that should power cut
+ * happen, the volumes will have either old name or new name. So the possible
+ * use-cases of this command is atomic upgrade. Indeed, to upgrade, say, volumes
+ * A and B one may create temporary volumes %A1 and %B1 with the new contents,
+ * then atomically re-name A1->A and B1->B, in which case old %A and %B will
+ * be removed.
+ *
+ * If it is not desirable to remove old A and B, the re-name request has to
+ * contain 4 entries: A1->A, A->A1, B1->B, B->B1, in which case old A1 and B1
+ * become A and B, and old A and B will become A1 and B1.
+ *
+ * It is also OK to request: A1->A, A1->X, B1->B, B->Y, in which case old A1
+ * and B1 become A and B, and old A and B become X and Y.
+ *
+ * In other words, in case of re-naming into an existing volume name, the
+ * existing volume is removed, unless it is re-named as well at the same
+ * re-name request.
+ */
+struct ubi_rnvol_req {
+	__s32 count;
+	__s8 padding1[12];
+	struct {
+		__s32 vol_id;
+		__s16 name_len;
+		__s8  padding2[2];
+		char    name[UBI_MAX_VOLUME_NAME + 1];
+	} ents[UBI_MAX_RNVOL];
+} __packed;
+
+/**
+ * struct ubi_leb_change_req - a data structure used in atomic LEB change
+ *                             requests.
+ * @lnum: logical eraseblock number to change
+ * @bytes: how many bytes will be written to the logical eraseblock
+ * @dtype: data type (%UBI_LONGTERM, %UBI_SHORTTERM, %UBI_UNKNOWN)
+ * @padding: reserved for future, not used, has to be zeroed
+ */
+struct ubi_leb_change_req {
+	__s32 lnum;
+	__s32 bytes;
+	__s8  dtype;
+	__s8  padding[7];
+} __packed;
+
+/**
+ * struct ubi_map_req - a data structure used in map LEB requests.
+ * @lnum: logical eraseblock number to unmap
+ * @dtype: data type (%UBI_LONGTERM, %UBI_SHORTTERM, %UBI_UNKNOWN)
+ * @padding: reserved for future, not used, has to be zeroed
+ */
+struct ubi_map_req {
+	__s32 lnum;
+	__s8  dtype;
+	__s8  padding[3];
+} __packed;
+
+
+/**
+ * struct ubi_set_vol_prop_req - a data structure used to set an UBI volume
+ *                               property.
+ * @property: property to set (%UBI_VOL_PROP_DIRECT_WRITE)
+ * @padding: reserved for future, not used, has to be zeroed
+ * @value: value to set
+ */
+struct ubi_set_vol_prop_req {
+	__u8  property;
+	__u8  padding[7];
+	__u64 value;
+}  __packed;
+
+#endif /* __UBI_USER_H__ */
diff --git a/include/net/9p/9p.h b/include/net/9p/9p.h
new file mode 100644
index 00000000..7184853c
--- /dev/null
+++ b/include/net/9p/9p.h
@@ -0,0 +1,577 @@
+/*
+ * include/net/9p/9p.h
+ *
+ * 9P protocol definitions.
+ *
+ *  Copyright (C) 2005 by Latchesar Ionkov <lucho@ionkov.net>
+ *  Copyright (C) 2004 by Eric Van Hensbergen <ericvh@gmail.com>
+ *  Copyright (C) 2002 by Ron Minnich <rminnich@lanl.gov>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2
+ *  as published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to:
+ *  Free Software Foundation
+ *  51 Franklin Street, Fifth Floor
+ *  Boston, MA  02111-1301  USA
+ *
+ */
+
+#ifndef NET_9P_H
+#define NET_9P_H
+
+/**
+ * enum p9_debug_flags - bits for mount time debug parameter
+ * @P9_DEBUG_ERROR: more verbose error messages including original error string
+ * @P9_DEBUG_9P: 9P protocol tracing
+ * @P9_DEBUG_VFS: VFS API tracing
+ * @P9_DEBUG_CONV: protocol conversion tracing
+ * @P9_DEBUG_MUX: trace management of concurrent transactions
+ * @P9_DEBUG_TRANS: transport tracing
+ * @P9_DEBUG_SLABS: memory management tracing
+ * @P9_DEBUG_FCALL: verbose dump of protocol messages
+ * @P9_DEBUG_FID: fid allocation/deallocation tracking
+ * @P9_DEBUG_PKT: packet marshalling/unmarshalling
+ * @P9_DEBUG_FSC: FS-cache tracing
+ * @P9_DEBUG_VPKT: Verbose packet debugging (full packet dump)
+ *
+ * These flags are passed at mount time to turn on various levels of
+ * verbosity and tracing which will be output to the system logs.
+ */
+
+enum p9_debug_flags {
+	P9_DEBUG_ERROR = 	(1<<0),
+	P9_DEBUG_9P = 		(1<<2),
+	P9_DEBUG_VFS =		(1<<3),
+	P9_DEBUG_CONV =		(1<<4),
+	P9_DEBUG_MUX =		(1<<5),
+	P9_DEBUG_TRANS =	(1<<6),
+	P9_DEBUG_SLABS =      	(1<<7),
+	P9_DEBUG_FCALL =	(1<<8),
+	P9_DEBUG_FID =		(1<<9),
+	P9_DEBUG_PKT =		(1<<10),
+	P9_DEBUG_FSC =		(1<<11),
+	P9_DEBUG_VPKT =		(1<<12),
+};
+
+#ifdef CONFIG_NET_9P_DEBUG
+extern unsigned int p9_debug_level;
+__printf(3, 4)
+void _p9_debug(enum p9_debug_flags level, const char *func,
+	       const char *fmt, ...);
+#define p9_debug(level, fmt, ...)			\
+	_p9_debug(level, __func__, fmt, ##__VA_ARGS__)
+#else
+#define p9_debug(level, fmt, ...)			\
+	no_printk(fmt, ##__VA_ARGS__)
+#endif
+
+/**
+ * enum p9_msg_t - 9P message types
+ * @P9_TLERROR: not used
+ * @P9_RLERROR: response for any failed request for 9P2000.L
+ * @P9_TSTATFS: file system status request
+ * @P9_RSTATFS: file system status response
+ * @P9_TSYMLINK: make symlink request
+ * @P9_RSYMLINK: make symlink response
+ * @P9_TMKNOD: create a special file object request
+ * @P9_RMKNOD: create a special file object response
+ * @P9_TLCREATE: prepare a handle for I/O on an new file for 9P2000.L
+ * @P9_RLCREATE: response with file access information for 9P2000.L
+ * @P9_TRENAME: rename request
+ * @P9_RRENAME: rename response
+ * @P9_TMKDIR: create a directory request
+ * @P9_RMKDIR: create a directory response
+ * @P9_TVERSION: version handshake request
+ * @P9_RVERSION: version handshake response
+ * @P9_TAUTH: request to establish authentication channel
+ * @P9_RAUTH: response with authentication information
+ * @P9_TATTACH: establish user access to file service
+ * @P9_RATTACH: response with top level handle to file hierarchy
+ * @P9_TERROR: not used
+ * @P9_RERROR: response for any failed request
+ * @P9_TFLUSH: request to abort a previous request
+ * @P9_RFLUSH: response when previous request has been cancelled
+ * @P9_TWALK: descend a directory hierarchy
+ * @P9_RWALK: response with new handle for position within hierarchy
+ * @P9_TOPEN: prepare a handle for I/O on an existing file
+ * @P9_ROPEN: response with file access information
+ * @P9_TCREATE: prepare a handle for I/O on a new file
+ * @P9_RCREATE: response with file access information
+ * @P9_TREAD: request to transfer data from a file or directory
+ * @P9_RREAD: response with data requested
+ * @P9_TWRITE: reuqest to transfer data to a file
+ * @P9_RWRITE: response with out much data was transferred to file
+ * @P9_TCLUNK: forget about a handle to an entity within the file system
+ * @P9_RCLUNK: response when server has forgotten about the handle
+ * @P9_TREMOVE: request to remove an entity from the hierarchy
+ * @P9_RREMOVE: response when server has removed the entity
+ * @P9_TSTAT: request file entity attributes
+ * @P9_RSTAT: response with file entity attributes
+ * @P9_TWSTAT: request to update file entity attributes
+ * @P9_RWSTAT: response when file entity attributes are updated
+ *
+ * There are 14 basic operations in 9P2000, paired as
+ * requests and responses.  The one special case is ERROR
+ * as there is no @P9_TERROR request for clients to transmit to
+ * the server, but the server may respond to any other request
+ * with an @P9_RERROR.
+ *
+ * See Also: http://plan9.bell-labs.com/sys/man/5/INDEX.html
+ */
+
+enum p9_msg_t {
+	P9_TLERROR = 6,
+	P9_RLERROR,
+	P9_TSTATFS = 8,
+	P9_RSTATFS,
+	P9_TLOPEN = 12,
+	P9_RLOPEN,
+	P9_TLCREATE = 14,
+	P9_RLCREATE,
+	P9_TSYMLINK = 16,
+	P9_RSYMLINK,
+	P9_TMKNOD = 18,
+	P9_RMKNOD,
+	P9_TRENAME = 20,
+	P9_RRENAME,
+	P9_TREADLINK = 22,
+	P9_RREADLINK,
+	P9_TGETATTR = 24,
+	P9_RGETATTR,
+	P9_TSETATTR = 26,
+	P9_RSETATTR,
+	P9_TXATTRWALK = 30,
+	P9_RXATTRWALK,
+	P9_TXATTRCREATE = 32,
+	P9_RXATTRCREATE,
+	P9_TREADDIR = 40,
+	P9_RREADDIR,
+	P9_TFSYNC = 50,
+	P9_RFSYNC,
+	P9_TLOCK = 52,
+	P9_RLOCK,
+	P9_TGETLOCK = 54,
+	P9_RGETLOCK,
+	P9_TLINK = 70,
+	P9_RLINK,
+	P9_TMKDIR = 72,
+	P9_RMKDIR,
+	P9_TRENAMEAT = 74,
+	P9_RRENAMEAT,
+	P9_TUNLINKAT = 76,
+	P9_RUNLINKAT,
+	P9_TVERSION = 100,
+	P9_RVERSION,
+	P9_TAUTH = 102,
+	P9_RAUTH,
+	P9_TATTACH = 104,
+	P9_RATTACH,
+	P9_TERROR = 106,
+	P9_RERROR,
+	P9_TFLUSH = 108,
+	P9_RFLUSH,
+	P9_TWALK = 110,
+	P9_RWALK,
+	P9_TOPEN = 112,
+	P9_ROPEN,
+	P9_TCREATE = 114,
+	P9_RCREATE,
+	P9_TREAD = 116,
+	P9_RREAD,
+	P9_TWRITE = 118,
+	P9_RWRITE,
+	P9_TCLUNK = 120,
+	P9_RCLUNK,
+	P9_TREMOVE = 122,
+	P9_RREMOVE,
+	P9_TSTAT = 124,
+	P9_RSTAT,
+	P9_TWSTAT = 126,
+	P9_RWSTAT,
+};
+
+/**
+ * enum p9_open_mode_t - 9P open modes
+ * @P9_OREAD: open file for reading only
+ * @P9_OWRITE: open file for writing only
+ * @P9_ORDWR: open file for reading or writing
+ * @P9_OEXEC: open file for execution
+ * @P9_OTRUNC: truncate file to zero-length before opening it
+ * @P9_OREXEC: close the file when an exec(2) system call is made
+ * @P9_ORCLOSE: remove the file when the file is closed
+ * @P9_OAPPEND: open the file and seek to the end
+ * @P9_OEXCL: only create a file, do not open it
+ *
+ * 9P open modes differ slightly from Posix standard modes.
+ * In particular, there are extra modes which specify different
+ * semantic behaviors than may be available on standard Posix
+ * systems.  For example, @P9_OREXEC and @P9_ORCLOSE are modes that
+ * most likely will not be issued from the Linux VFS client, but may
+ * be supported by servers.
+ *
+ * See Also: http://plan9.bell-labs.com/magic/man2html/2/open
+ */
+
+enum p9_open_mode_t {
+	P9_OREAD = 0x00,
+	P9_OWRITE = 0x01,
+	P9_ORDWR = 0x02,
+	P9_OEXEC = 0x03,
+	P9_OTRUNC = 0x10,
+	P9_OREXEC = 0x20,
+	P9_ORCLOSE = 0x40,
+	P9_OAPPEND = 0x80,
+	P9_OEXCL = 0x1000,
+};
+
+/**
+ * enum p9_perm_t - 9P permissions
+ * @P9_DMDIR: mode bit for directories
+ * @P9_DMAPPEND: mode bit for is append-only
+ * @P9_DMEXCL: mode bit for excluse use (only one open handle allowed)
+ * @P9_DMMOUNT: mode bit for mount points
+ * @P9_DMAUTH: mode bit for authentication file
+ * @P9_DMTMP: mode bit for non-backed-up files
+ * @P9_DMSYMLINK: mode bit for symbolic links (9P2000.u)
+ * @P9_DMLINK: mode bit for hard-link (9P2000.u)
+ * @P9_DMDEVICE: mode bit for device files (9P2000.u)
+ * @P9_DMNAMEDPIPE: mode bit for named pipe (9P2000.u)
+ * @P9_DMSOCKET: mode bit for socket (9P2000.u)
+ * @P9_DMSETUID: mode bit for setuid (9P2000.u)
+ * @P9_DMSETGID: mode bit for setgid (9P2000.u)
+ * @P9_DMSETVTX: mode bit for sticky bit (9P2000.u)
+ *
+ * 9P permissions differ slightly from Posix standard modes.
+ *
+ * See Also: http://plan9.bell-labs.com/magic/man2html/2/stat
+ */
+enum p9_perm_t {
+	P9_DMDIR = 0x80000000,
+	P9_DMAPPEND = 0x40000000,
+	P9_DMEXCL = 0x20000000,
+	P9_DMMOUNT = 0x10000000,
+	P9_DMAUTH = 0x08000000,
+	P9_DMTMP = 0x04000000,
+/* 9P2000.u extensions */
+	P9_DMSYMLINK = 0x02000000,
+	P9_DMLINK = 0x01000000,
+	P9_DMDEVICE = 0x00800000,
+	P9_DMNAMEDPIPE = 0x00200000,
+	P9_DMSOCKET = 0x00100000,
+	P9_DMSETUID = 0x00080000,
+	P9_DMSETGID = 0x00040000,
+	P9_DMSETVTX = 0x00010000,
+};
+
+/* 9p2000.L open flags */
+#define P9_DOTL_RDONLY        00000000
+#define P9_DOTL_WRONLY        00000001
+#define P9_DOTL_RDWR          00000002
+#define P9_DOTL_NOACCESS      00000003
+#define P9_DOTL_CREATE        00000100
+#define P9_DOTL_EXCL          00000200
+#define P9_DOTL_NOCTTY        00000400
+#define P9_DOTL_TRUNC         00001000
+#define P9_DOTL_APPEND        00002000
+#define P9_DOTL_NONBLOCK      00004000
+#define P9_DOTL_DSYNC         00010000
+#define P9_DOTL_FASYNC        00020000
+#define P9_DOTL_DIRECT        00040000
+#define P9_DOTL_LARGEFILE     00100000
+#define P9_DOTL_DIRECTORY     00200000
+#define P9_DOTL_NOFOLLOW      00400000
+#define P9_DOTL_NOATIME       01000000
+#define P9_DOTL_CLOEXEC       02000000
+#define P9_DOTL_SYNC          04000000
+
+/* 9p2000.L at flags */
+#define P9_DOTL_AT_REMOVEDIR		0x200
+
+/* 9p2000.L lock type */
+#define P9_LOCK_TYPE_RDLCK 0
+#define P9_LOCK_TYPE_WRLCK 1
+#define P9_LOCK_TYPE_UNLCK 2
+
+/**
+ * enum p9_qid_t - QID types
+ * @P9_QTDIR: directory
+ * @P9_QTAPPEND: append-only
+ * @P9_QTEXCL: excluse use (only one open handle allowed)
+ * @P9_QTMOUNT: mount points
+ * @P9_QTAUTH: authentication file
+ * @P9_QTTMP: non-backed-up files
+ * @P9_QTSYMLINK: symbolic links (9P2000.u)
+ * @P9_QTLINK: hard-link (9P2000.u)
+ * @P9_QTFILE: normal files
+ *
+ * QID types are a subset of permissions - they are primarily
+ * used to differentiate semantics for a file system entity via
+ * a jump-table.  Their value is also the most significant 16 bits
+ * of the permission_t
+ *
+ * See Also: http://plan9.bell-labs.com/magic/man2html/2/stat
+ */
+enum p9_qid_t {
+	P9_QTDIR = 0x80,
+	P9_QTAPPEND = 0x40,
+	P9_QTEXCL = 0x20,
+	P9_QTMOUNT = 0x10,
+	P9_QTAUTH = 0x08,
+	P9_QTTMP = 0x04,
+	P9_QTSYMLINK = 0x02,
+	P9_QTLINK = 0x01,
+	P9_QTFILE = 0x00,
+};
+
+/* 9P Magic Numbers */
+#define P9_NOTAG	(u16)(~0)
+#define P9_NOFID	(u32)(~0)
+#define P9_MAXWELEM	16
+
+/* ample room for Twrite/Rread header */
+#define P9_IOHDRSZ	24
+
+/* Room for readdir header */
+#define P9_READDIRHDRSZ	24
+
+/* size of header for zero copy read/write */
+#define P9_ZC_HDR_SZ 4096
+
+/**
+ * struct p9_qid - file system entity information
+ * @type: 8-bit type &p9_qid_t
+ * @version: 16-bit monotonically incrementing version number
+ * @path: 64-bit per-server-unique ID for a file system element
+ *
+ * qids are identifiers used by 9P servers to track file system
+ * entities.  The type is used to differentiate semantics for operations
+ * on the entity (ie. read means something different on a directory than
+ * on a file).  The path provides a server unique index for an entity
+ * (roughly analogous to an inode number), while the version is updated
+ * every time a file is modified and can be used to maintain cache
+ * coherency between clients and serves.
+ * Servers will often differentiate purely synthetic entities by setting
+ * their version to 0, signaling that they should never be cached and
+ * should be accessed synchronously.
+ *
+ * See Also://plan9.bell-labs.com/magic/man2html/2/stat
+ */
+
+struct p9_qid {
+	u8 type;
+	u32 version;
+	u64 path;
+};
+
+/**
+ * struct p9_wstat - file system metadata information
+ * @size: length prefix for this stat structure instance
+ * @type: the type of the server (equivalent to a major number)
+ * @dev: the sub-type of the server (equivalent to a minor number)
+ * @qid: unique id from the server of type &p9_qid
+ * @mode: Plan 9 format permissions of type &p9_perm_t
+ * @atime: Last access/read time
+ * @mtime: Last modify/write time
+ * @length: file length
+ * @name: last element of path (aka filename)
+ * @uid: owner name
+ * @gid: group owner
+ * @muid: last modifier
+ * @extension: area used to encode extended UNIX support
+ * @n_uid: numeric user id of owner (part of 9p2000.u extension)
+ * @n_gid: numeric group id (part of 9p2000.u extension)
+ * @n_muid: numeric user id of laster modifier (part of 9p2000.u extension)
+ *
+ * See Also: http://plan9.bell-labs.com/magic/man2html/2/stat
+ */
+
+struct p9_wstat {
+	u16 size;
+	u16 type;
+	u32 dev;
+	struct p9_qid qid;
+	u32 mode;
+	u32 atime;
+	u32 mtime;
+	u64 length;
+	char *name;
+	char *uid;
+	char *gid;
+	char *muid;
+	char *extension;	/* 9p2000.u extensions */
+	u32 n_uid;		/* 9p2000.u extensions */
+	u32 n_gid;		/* 9p2000.u extensions */
+	u32 n_muid;		/* 9p2000.u extensions */
+};
+
+struct p9_stat_dotl {
+	u64 st_result_mask;
+	struct p9_qid qid;
+	u32 st_mode;
+	u32 st_uid;
+	u32 st_gid;
+	u64 st_nlink;
+	u64 st_rdev;
+	u64 st_size;
+	u64 st_blksize;
+	u64 st_blocks;
+	u64 st_atime_sec;
+	u64 st_atime_nsec;
+	u64 st_mtime_sec;
+	u64 st_mtime_nsec;
+	u64 st_ctime_sec;
+	u64 st_ctime_nsec;
+	u64 st_btime_sec;
+	u64 st_btime_nsec;
+	u64 st_gen;
+	u64 st_data_version;
+};
+
+#define P9_STATS_MODE		0x00000001ULL
+#define P9_STATS_NLINK		0x00000002ULL
+#define P9_STATS_UID		0x00000004ULL
+#define P9_STATS_GID		0x00000008ULL
+#define P9_STATS_RDEV		0x00000010ULL
+#define P9_STATS_ATIME		0x00000020ULL
+#define P9_STATS_MTIME		0x00000040ULL
+#define P9_STATS_CTIME		0x00000080ULL
+#define P9_STATS_INO		0x00000100ULL
+#define P9_STATS_SIZE		0x00000200ULL
+#define P9_STATS_BLOCKS		0x00000400ULL
+
+#define P9_STATS_BTIME		0x00000800ULL
+#define P9_STATS_GEN		0x00001000ULL
+#define P9_STATS_DATA_VERSION	0x00002000ULL
+
+#define P9_STATS_BASIC		0x000007ffULL /* Mask for fields up to BLOCKS */
+#define P9_STATS_ALL		0x00003fffULL /* Mask for All fields above */
+
+/**
+ * struct p9_iattr_dotl - P9 inode attribute for setattr
+ * @valid: bitfield specifying which fields are valid
+ *         same as in struct iattr
+ * @mode: File permission bits
+ * @uid: user id of owner
+ * @gid: group id
+ * @size: File size
+ * @atime_sec: Last access time, seconds
+ * @atime_nsec: Last access time, nanoseconds
+ * @mtime_sec: Last modification time, seconds
+ * @mtime_nsec: Last modification time, nanoseconds
+ */
+
+struct p9_iattr_dotl {
+	u32 valid;
+	u32 mode;
+	u32 uid;
+	u32 gid;
+	u64 size;
+	u64 atime_sec;
+	u64 atime_nsec;
+	u64 mtime_sec;
+	u64 mtime_nsec;
+};
+
+#define P9_LOCK_SUCCESS 0
+#define P9_LOCK_BLOCKED 1
+#define P9_LOCK_ERROR 2
+#define P9_LOCK_GRACE 3
+
+#define P9_LOCK_FLAGS_BLOCK 1
+#define P9_LOCK_FLAGS_RECLAIM 2
+
+/* struct p9_flock: POSIX lock structure
+ * @type - type of lock
+ * @flags - lock flags
+ * @start - starting offset of the lock
+ * @length - number of bytes
+ * @proc_id - process id which wants to take lock
+ * @client_id - client id
+ */
+
+struct p9_flock {
+	u8 type;
+	u32 flags;
+	u64 start;
+	u64 length;
+	u32 proc_id;
+	char *client_id;
+};
+
+/* struct p9_getlock: getlock structure
+ * @type - type of lock
+ * @start - starting offset of the lock
+ * @length - number of bytes
+ * @proc_id - process id which wants to take lock
+ * @client_id - client id
+ */
+
+struct p9_getlock {
+	u8 type;
+	u64 start;
+	u64 length;
+	u32 proc_id;
+	char *client_id;
+};
+
+struct p9_rstatfs {
+	u32 type;
+	u32 bsize;
+	u64 blocks;
+	u64 bfree;
+	u64 bavail;
+	u64 files;
+	u64 ffree;
+	u64 fsid;
+	u32 namelen;
+};
+
+/**
+ * struct p9_fcall - primary packet structure
+ * @size: prefixed length of the structure
+ * @id: protocol operating identifier of type &p9_msg_t
+ * @tag: transaction id of the request
+ * @offset: used by marshalling routines to track current position in buffer
+ * @capacity: used by marshalling routines to track total malloc'd capacity
+ * @sdata: payload
+ *
+ * &p9_fcall represents the structure for all 9P RPC
+ * transactions.  Requests are packaged into fcalls, and reponses
+ * must be extracted from them.
+ *
+ * See Also: http://plan9.bell-labs.com/magic/man2html/2/fcall
+ */
+
+struct p9_fcall {
+	u32 size;
+	u8 id;
+	u16 tag;
+
+	size_t offset;
+	size_t capacity;
+
+	u8 *sdata;
+};
+
+struct p9_idpool;
+
+int p9_errstr2errno(char *errstr, int len);
+
+struct p9_idpool *p9_idpool_create(void);
+void p9_idpool_destroy(struct p9_idpool *);
+int p9_idpool_get(struct p9_idpool *p);
+void p9_idpool_put(int id, struct p9_idpool *p);
+int p9_idpool_check(int id, struct p9_idpool *p);
+
+int p9_error_init(void);
+int p9_trans_fd_init(void);
+void p9_trans_fd_exit(void);
+#endif /* NET_9P_H */
diff --git a/include/net/9p/client.h b/include/net/9p/client.h
new file mode 100644
index 00000000..fc9b90b0
--- /dev/null
+++ b/include/net/9p/client.h
@@ -0,0 +1,271 @@
+/*
+ * include/net/9p/client.h
+ *
+ * 9P Client Definitions
+ *
+ *  Copyright (C) 2008 by Eric Van Hensbergen <ericvh@gmail.com>
+ *  Copyright (C) 2007 by Latchesar Ionkov <lucho@ionkov.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2
+ *  as published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to:
+ *  Free Software Foundation
+ *  51 Franklin Street, Fifth Floor
+ *  Boston, MA  02111-1301  USA
+ *
+ */
+
+#ifndef NET_9P_CLIENT_H
+#define NET_9P_CLIENT_H
+
+/* Number of requests per row */
+#define P9_ROW_MAXTAG 255
+
+/** enum p9_proto_versions - 9P protocol versions
+ * @p9_proto_legacy: 9P Legacy mode, pre-9P2000.u
+ * @p9_proto_2000u: 9P2000.u extension
+ * @p9_proto_2000L: 9P2000.L extension
+ */
+
+enum p9_proto_versions{
+	p9_proto_legacy,
+	p9_proto_2000u,
+	p9_proto_2000L,
+};
+
+
+/**
+ * enum p9_trans_status - different states of underlying transports
+ * @Connected: transport is connected and healthy
+ * @Disconnected: transport has been disconnected
+ * @Hung: transport is connected by wedged
+ *
+ * This enumeration details the various states a transport
+ * instatiation can be in.
+ */
+
+enum p9_trans_status {
+	Connected,
+	BeginDisconnect,
+	Disconnected,
+	Hung,
+};
+
+/**
+ * enum p9_req_status_t - status of a request
+ * @REQ_STATUS_IDLE: request slot unused
+ * @REQ_STATUS_ALLOC: request has been allocated but not sent
+ * @REQ_STATUS_UNSENT: request waiting to be sent
+ * @REQ_STATUS_SENT: request sent to server
+ * @REQ_STATUS_FLSH: a flush has been sent for this request
+ * @REQ_STATUS_RCVD: response received from server
+ * @REQ_STATUS_FLSHD: request has been flushed
+ * @REQ_STATUS_ERROR: request encountered an error on the client side
+ *
+ * The @REQ_STATUS_IDLE state is used to mark a request slot as unused
+ * but use is actually tracked by the idpool structure which handles tag
+ * id allocation.
+ *
+ */
+
+enum p9_req_status_t {
+	REQ_STATUS_IDLE,
+	REQ_STATUS_ALLOC,
+	REQ_STATUS_UNSENT,
+	REQ_STATUS_SENT,
+	REQ_STATUS_FLSH,
+	REQ_STATUS_RCVD,
+	REQ_STATUS_FLSHD,
+	REQ_STATUS_ERROR,
+};
+
+/**
+ * struct p9_req_t - request slots
+ * @status: status of this request slot
+ * @t_err: transport error
+ * @flush_tag: tag of request being flushed (for flush requests)
+ * @wq: wait_queue for the client to block on for this request
+ * @tc: the request fcall structure
+ * @rc: the response fcall structure
+ * @aux: transport specific data (provided for trans_fd migration)
+ * @req_list: link for higher level objects to chain requests
+ *
+ * Transport use an array to track outstanding requests
+ * instead of a list.  While this may incurr overhead during initial
+ * allocation or expansion, it makes request lookup much easier as the
+ * tag id is a index into an array.  (We use tag+1 so that we can accommodate
+ * the -1 tag for the T_VERSION request).
+ * This also has the nice effect of only having to allocate wait_queues
+ * once, instead of constantly allocating and freeing them.  Its possible
+ * other resources could benefit from this scheme as well.
+ *
+ */
+
+struct p9_req_t {
+	int status;
+	int t_err;
+	wait_queue_head_t *wq;
+	struct p9_fcall *tc;
+	struct p9_fcall *rc;
+	void *aux;
+
+	struct list_head req_list;
+};
+
+/**
+ * struct p9_client - per client instance state
+ * @lock: protect @fidlist
+ * @msize: maximum data size negotiated by protocol
+ * @dotu: extension flags negotiated by protocol
+ * @proto_version: 9P protocol version to use
+ * @trans_mod: module API instantiated with this client
+ * @trans: tranport instance state and API
+ * @conn: connection state information used by trans_fd
+ * @fidpool: fid handle accounting for session
+ * @fidlist: List of active fid handles
+ * @tagpool - transaction id accounting for session
+ * @reqs - 2D array of requests
+ * @max_tag - current maximum tag id allocated
+ *
+ * The client structure is used to keep track of various per-client
+ * state that has been instantiated.
+ * In order to minimize per-transaction overhead we use a
+ * simple array to lookup requests instead of a hash table
+ * or linked list.  In order to support larger number of
+ * transactions, we make this a 2D array, allocating new rows
+ * when we need to grow the total number of the transactions.
+ *
+ * Each row is 256 requests and we'll support up to 256 rows for
+ * a total of 64k concurrent requests per session.
+ *
+ * Bugs: duplicated data and potentially unnecessary elements.
+ */
+
+struct p9_client {
+	spinlock_t lock; /* protect client structure */
+	unsigned int msize;
+	unsigned char proto_version;
+	struct p9_trans_module *trans_mod;
+	enum p9_trans_status status;
+	void *trans;
+	struct p9_conn *conn;
+
+	struct p9_idpool *fidpool;
+	struct list_head fidlist;
+
+	struct p9_idpool *tagpool;
+	struct p9_req_t *reqs[P9_ROW_MAXTAG];
+	int max_tag;
+};
+
+/**
+ * struct p9_fid - file system entity handle
+ * @clnt: back pointer to instantiating &p9_client
+ * @fid: numeric identifier for this handle
+ * @mode: current mode of this fid (enum?)
+ * @qid: the &p9_qid server identifier this handle points to
+ * @iounit: the server reported maximum transaction size for this file
+ * @uid: the numeric uid of the local user who owns this handle
+ * @rdir: readdir accounting structure (allocated on demand)
+ * @flist: per-client-instance fid tracking
+ * @dlist: per-dentry fid tracking
+ *
+ * TODO: This needs lots of explanation.
+ */
+
+struct p9_fid {
+	struct p9_client *clnt;
+	u32 fid;
+	int mode;
+	struct p9_qid qid;
+	u32 iounit;
+	uid_t uid;
+
+	void *rdir;
+
+	struct list_head flist;
+	struct list_head dlist;	/* list of all fids attached to a dentry */
+};
+
+/**
+ * struct p9_dirent - directory entry structure
+ * @qid: The p9 server qid for this dirent
+ * @d_off: offset to the next dirent
+ * @d_type: type of file
+ * @d_name: file name
+ */
+
+struct p9_dirent {
+	struct p9_qid qid;
+	u64 d_off;
+	unsigned char d_type;
+	char d_name[256];
+};
+
+int p9_client_statfs(struct p9_fid *fid, struct p9_rstatfs *sb);
+int p9_client_rename(struct p9_fid *fid, struct p9_fid *newdirfid,
+		     const char *name);
+int p9_client_renameat(struct p9_fid *olddirfid, const char *old_name,
+		       struct p9_fid *newdirfid, const char *new_name);
+struct p9_client *p9_client_create(const char *dev_name, char *options);
+void p9_client_destroy(struct p9_client *clnt);
+void p9_client_disconnect(struct p9_client *clnt);
+void p9_client_begin_disconnect(struct p9_client *clnt);
+struct p9_fid *p9_client_attach(struct p9_client *clnt, struct p9_fid *afid,
+					char *uname, u32 n_uname, char *aname);
+struct p9_fid *p9_client_walk(struct p9_fid *oldfid, uint16_t nwname,
+		char **wnames, int clone);
+int p9_client_open(struct p9_fid *fid, int mode);
+int p9_client_fcreate(struct p9_fid *fid, char *name, u32 perm, int mode,
+							char *extension);
+int p9_client_link(struct p9_fid *fid, struct p9_fid *oldfid, char *newname);
+int p9_client_symlink(struct p9_fid *fid, char *name, char *symname, gid_t gid,
+							struct p9_qid *qid);
+int p9_client_create_dotl(struct p9_fid *ofid, char *name, u32 flags, u32 mode,
+		gid_t gid, struct p9_qid *qid);
+int p9_client_clunk(struct p9_fid *fid);
+int p9_client_fsync(struct p9_fid *fid, int datasync);
+int p9_client_remove(struct p9_fid *fid);
+int p9_client_unlinkat(struct p9_fid *dfid, const char *name, int flags);
+int p9_client_read(struct p9_fid *fid, char *data, char __user *udata,
+							u64 offset, u32 count);
+int p9_client_write(struct p9_fid *fid, char *data, const char __user *udata,
+							u64 offset, u32 count);
+int p9_client_readdir(struct p9_fid *fid, char *data, u32 count, u64 offset);
+int p9dirent_read(struct p9_client *clnt, char *buf, int len,
+		  struct p9_dirent *dirent);
+struct p9_wstat *p9_client_stat(struct p9_fid *fid);
+int p9_client_wstat(struct p9_fid *fid, struct p9_wstat *wst);
+int p9_client_setattr(struct p9_fid *fid, struct p9_iattr_dotl *attr);
+
+struct p9_stat_dotl *p9_client_getattr_dotl(struct p9_fid *fid,
+							u64 request_mask);
+
+int p9_client_mknod_dotl(struct p9_fid *oldfid, char *name, int mode,
+			dev_t rdev, gid_t gid, struct p9_qid *);
+int p9_client_mkdir_dotl(struct p9_fid *fid, char *name, int mode,
+				gid_t gid, struct p9_qid *);
+int p9_client_lock_dotl(struct p9_fid *fid, struct p9_flock *flock, u8 *status);
+int p9_client_getlock_dotl(struct p9_fid *fid, struct p9_getlock *fl);
+struct p9_req_t *p9_tag_lookup(struct p9_client *, u16);
+void p9_client_cb(struct p9_client *c, struct p9_req_t *req);
+
+int p9_parse_header(struct p9_fcall *, int32_t *, int8_t *, int16_t *, int);
+int p9stat_read(struct p9_client *, char *, int, struct p9_wstat *);
+void p9stat_free(struct p9_wstat *);
+
+int p9_is_proto_dotu(struct p9_client *clnt);
+int p9_is_proto_dotl(struct p9_client *clnt);
+struct p9_fid *p9_client_xattrwalk(struct p9_fid *, const char *, u64 *);
+int p9_client_xattrcreate(struct p9_fid *, const char *, u64, int);
+int p9_client_readlink(struct p9_fid *fid, char **target);
+
+#endif /* NET_9P_CLIENT_H */
diff --git a/include/net/9p/transport.h b/include/net/9p/transport.h
new file mode 100644
index 00000000..adcbb20f
--- /dev/null
+++ b/include/net/9p/transport.h
@@ -0,0 +1,67 @@
+/*
+ * include/net/9p/transport.h
+ *
+ * Transport Definition
+ *
+ *  Copyright (C) 2005 by Latchesar Ionkov <lucho@ionkov.net>
+ *  Copyright (C) 2004-2008 by Eric Van Hensbergen <ericvh@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2
+ *  as published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to:
+ *  Free Software Foundation
+ *  51 Franklin Street, Fifth Floor
+ *  Boston, MA  02111-1301  USA
+ *
+ */
+
+#ifndef NET_9P_TRANSPORT_H
+#define NET_9P_TRANSPORT_H
+
+/**
+ * struct p9_trans_module - transport module interface
+ * @list: used to maintain a list of currently available transports
+ * @name: the human-readable name of the transport
+ * @maxsize: transport provided maximum packet size
+ * @pref: Preferences of this transport
+ * @def: set if this transport should be considered the default
+ * @create: member function to create a new connection on this transport
+ * @close: member function to discard a connection on this transport
+ * @request: member function to issue a request to the transport
+ * @cancel: member function to cancel a request (if it hasn't been sent)
+ *
+ * This is the basic API for a transport module which is registered by the
+ * transport module with the 9P core network module and used by the client
+ * to instantiate a new connection on a transport.
+ *
+ * The transport module list is protected by v9fs_trans_lock.
+ */
+
+struct p9_trans_module {
+	struct list_head list;
+	char *name;		/* name of transport */
+	int maxsize;		/* max message size of transport */
+	int def;		/* this transport should be default */
+	struct module *owner;
+	int (*create)(struct p9_client *, const char *, char *);
+	void (*close) (struct p9_client *);
+	int (*request) (struct p9_client *, struct p9_req_t *req);
+	int (*cancel) (struct p9_client *, struct p9_req_t *req);
+	int (*zc_request)(struct p9_client *, struct p9_req_t *,
+			  char *, char *, int , int, int, int);
+};
+
+void v9fs_register_trans(struct p9_trans_module *m);
+void v9fs_unregister_trans(struct p9_trans_module *m);
+struct p9_trans_module *v9fs_get_trans_by_name(char *s);
+struct p9_trans_module *v9fs_get_default_trans(void);
+void v9fs_put_trans(struct p9_trans_module *m);
+#endif /* NET_9P_TRANSPORT_H */
diff --git a/include/net/act_api.h b/include/net/act_api.h
new file mode 100644
index 00000000..c739531e
--- /dev/null
+++ b/include/net/act_api.h
@@ -0,0 +1,126 @@
+#ifndef __NET_ACT_API_H
+#define __NET_ACT_API_H
+
+/*
+ * Public police action API for classifiers/qdiscs
+ */
+
+#include <net/sch_generic.h>
+#include <net/pkt_sched.h>
+
+struct tcf_common {
+	struct tcf_common		*tcfc_next;
+	u32				tcfc_index;
+	int				tcfc_refcnt;
+	int				tcfc_bindcnt;
+	u32				tcfc_capab;
+	int				tcfc_action;
+	struct tcf_t			tcfc_tm;
+	struct gnet_stats_basic_packed	tcfc_bstats;
+	struct gnet_stats_queue		tcfc_qstats;
+	struct gnet_stats_rate_est	tcfc_rate_est;
+	spinlock_t			tcfc_lock;
+	struct rcu_head			tcfc_rcu;
+};
+#define tcf_next	common.tcfc_next
+#define tcf_index	common.tcfc_index
+#define tcf_refcnt	common.tcfc_refcnt
+#define tcf_bindcnt	common.tcfc_bindcnt
+#define tcf_capab	common.tcfc_capab
+#define tcf_action	common.tcfc_action
+#define tcf_tm		common.tcfc_tm
+#define tcf_bstats	common.tcfc_bstats
+#define tcf_qstats	common.tcfc_qstats
+#define tcf_rate_est	common.tcfc_rate_est
+#define tcf_lock	common.tcfc_lock
+#define tcf_rcu		common.tcfc_rcu
+
+struct tcf_police {
+	struct tcf_common	common;
+	int			tcfp_result;
+	u32			tcfp_ewma_rate;
+	u32			tcfp_burst;
+	u32			tcfp_mtu;
+	u32			tcfp_toks;
+	u32			tcfp_ptoks;
+	psched_time_t		tcfp_t_c;
+	struct qdisc_rate_table	*tcfp_R_tab;
+	struct qdisc_rate_table	*tcfp_P_tab;
+};
+#define to_police(pc)	\
+	container_of(pc, struct tcf_police, common)
+
+struct tcf_hashinfo {
+	struct tcf_common	**htab;
+	unsigned int		hmask;
+	rwlock_t		*lock;
+};
+
+static inline unsigned int tcf_hash(u32 index, unsigned int hmask)
+{
+	return index & hmask;
+}
+
+#ifdef CONFIG_NET_CLS_ACT
+
+#define ACT_P_CREATED 1
+#define ACT_P_DELETED 1
+
+struct tcf_act_hdr {
+	struct tcf_common	common;
+};
+
+struct tc_action {
+	void			*priv;
+	const struct tc_action_ops	*ops;
+	__u32			type; /* for backward compat(TCA_OLD_COMPAT) */
+	__u32			order;
+	struct tc_action	*next;
+};
+
+#define TCA_CAP_NONE 0
+struct tc_action_ops {
+	struct tc_action_ops *next;
+	struct tcf_hashinfo *hinfo;
+	char    kind[IFNAMSIZ];
+	__u32   type; /* TBD to match kind */
+	__u32 	capab;  /* capabilities includes 4 bit version */
+	struct module		*owner;
+	int     (*act)(struct sk_buff *, const struct tc_action *, struct tcf_result *);
+	int     (*get_stats)(struct sk_buff *, struct tc_action *);
+	int     (*dump)(struct sk_buff *, struct tc_action *, int, int);
+	int     (*cleanup)(struct tc_action *, int bind);
+	int     (*lookup)(struct tc_action *, u32);
+	int     (*init)(struct nlattr *, struct nlattr *, struct tc_action *, int , int);
+	int     (*walk)(struct sk_buff *, struct netlink_callback *, int, struct tc_action *);
+};
+
+extern struct tcf_common *tcf_hash_lookup(u32 index,
+					  struct tcf_hashinfo *hinfo);
+extern void tcf_hash_destroy(struct tcf_common *p, struct tcf_hashinfo *hinfo);
+extern int tcf_hash_release(struct tcf_common *p, int bind,
+			    struct tcf_hashinfo *hinfo);
+extern int tcf_generic_walker(struct sk_buff *skb, struct netlink_callback *cb,
+			      int type, struct tc_action *a);
+extern u32 tcf_hash_new_index(u32 *idx_gen, struct tcf_hashinfo *hinfo);
+extern int tcf_hash_search(struct tc_action *a, u32 index);
+extern struct tcf_common *tcf_hash_check(u32 index, struct tc_action *a,
+					 int bind, struct tcf_hashinfo *hinfo);
+extern struct tcf_common *tcf_hash_create(u32 index, struct nlattr *est,
+					  struct tc_action *a, int size,
+					  int bind, u32 *idx_gen,
+					  struct tcf_hashinfo *hinfo);
+extern void tcf_hash_insert(struct tcf_common *p, struct tcf_hashinfo *hinfo);
+
+extern int tcf_register_action(struct tc_action_ops *a);
+extern int tcf_unregister_action(struct tc_action_ops *a);
+extern void tcf_action_destroy(struct tc_action *a, int bind);
+extern int tcf_action_exec(struct sk_buff *skb, const struct tc_action *a, struct tcf_result *res);
+extern struct tc_action *tcf_action_init(struct nlattr *nla, struct nlattr *est, char *n, int ovr, int bind);
+extern struct tc_action *tcf_action_init_1(struct nlattr *nla, struct nlattr *est, char *n, int ovr, int bind);
+extern int tcf_action_dump(struct sk_buff *skb, struct tc_action *a, int, int);
+extern int tcf_action_dump_old(struct sk_buff *skb, struct tc_action *a, int, int);
+extern int tcf_action_dump_1(struct sk_buff *skb, struct tc_action *a, int, int);
+extern int tcf_action_copy_stats (struct sk_buff *,struct tc_action *, int);
+#endif /* CONFIG_NET_CLS_ACT */
+#endif
diff --git a/include/net/activity_stats.h b/include/net/activity_stats.h
new file mode 100644
index 00000000..10e4c150
--- /dev/null
+++ b/include/net/activity_stats.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Author: Mike Chan (mike@android.com)
+ */
+
+#ifndef __activity_stats_h
+#define __activity_stats_h
+
+#ifdef CONFIG_NET_ACTIVITY_STATS
+void activity_stats_update(void);
+#else
+#define activity_stats_update(void) {}
+#endif
+
+#endif /* _NET_ACTIVITY_STATS_H */
diff --git a/include/net/addrconf.h b/include/net/addrconf.h
new file mode 100644
index 00000000..757a1763
--- /dev/null
+++ b/include/net/addrconf.h
@@ -0,0 +1,285 @@
+#ifndef _ADDRCONF_H
+#define _ADDRCONF_H
+
+#define MAX_RTR_SOLICITATIONS		3
+#define RTR_SOLICITATION_INTERVAL	(4*HZ)
+
+#define MIN_VALID_LIFETIME		(2*3600)	/* 2 hours */
+
+#define TEMP_VALID_LIFETIME		(7*86400)
+#define TEMP_PREFERRED_LIFETIME		(86400)
+#define REGEN_MAX_RETRY			(3)
+#define MAX_DESYNC_FACTOR		(600)
+
+#define ADDR_CHECK_FREQUENCY		(120*HZ)
+
+#define IPV6_MAX_ADDRESSES		16
+
+#include <linux/in.h>
+#include <linux/in6.h>
+
+struct prefix_info {
+	__u8			type;
+	__u8			length;
+	__u8			prefix_len;
+
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8			onlink : 1,
+			 	autoconf : 1,
+				reserved : 6;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8			reserved : 6,
+				autoconf : 1,
+				onlink : 1;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+	__be32			valid;
+	__be32			prefered;
+	__be32			reserved2;
+
+	struct in6_addr		prefix;
+};
+
+
+#include <linux/netdevice.h>
+#include <net/if_inet6.h>
+#include <net/ipv6.h>
+
+#define IN6_ADDR_HSIZE		16
+
+extern int			addrconf_init(void);
+extern void			addrconf_cleanup(void);
+
+extern int			addrconf_add_ifaddr(struct net *net,
+						    void __user *arg);
+extern int			addrconf_del_ifaddr(struct net *net,
+						    void __user *arg);
+extern int			addrconf_set_dstaddr(struct net *net,
+						     void __user *arg);
+
+extern int			ipv6_chk_addr(struct net *net,
+					      const struct in6_addr *addr,
+					      struct net_device *dev,
+					      int strict);
+
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
+extern int			ipv6_chk_home_addr(struct net *net,
+						   const struct in6_addr *addr);
+#endif
+
+extern int			ipv6_chk_prefix(const struct in6_addr *addr,
+						struct net_device *dev);
+
+extern struct inet6_ifaddr      *ipv6_get_ifaddr(struct net *net,
+						 const struct in6_addr *addr,
+						 struct net_device *dev,
+						 int strict);
+
+extern int			ipv6_dev_get_saddr(struct net *net,
+					       struct net_device *dev,
+					       const struct in6_addr *daddr,
+					       unsigned int srcprefs,
+					       struct in6_addr *saddr);
+extern int			ipv6_get_lladdr(struct net_device *dev,
+						struct in6_addr *addr,
+						unsigned char banned_flags);
+extern int 			ipv6_rcv_saddr_equal(const struct sock *sk,
+						    const struct sock *sk2);
+extern void			addrconf_join_solict(struct net_device *dev,
+					const struct in6_addr *addr);
+extern void			addrconf_leave_solict(struct inet6_dev *idev,
+					const struct in6_addr *addr);
+
+static inline unsigned long addrconf_timeout_fixup(u32 timeout,
+						    unsigned unit)
+{
+	if (timeout == 0xffffffff)
+		return ~0UL;
+
+	/*
+	 * Avoid arithmetic overflow.
+	 * Assuming unit is constant and non-zero, this "if" statement
+	 * will go away on 64bit archs.
+	 */
+	if (0xfffffffe > LONG_MAX / unit && timeout > LONG_MAX / unit)
+		return LONG_MAX / unit;
+
+	return timeout;
+}
+
+static inline int addrconf_finite_timeout(unsigned long timeout)
+{
+	return ~timeout;
+}
+
+/*
+ *	IPv6 Address Label subsystem (addrlabel.c)
+ */
+extern int			ipv6_addr_label_init(void);
+extern void			ipv6_addr_label_cleanup(void);
+extern void			ipv6_addr_label_rtnl_register(void);
+extern u32			ipv6_addr_label(struct net *net,
+						const struct in6_addr *addr,
+						int type, int ifindex);
+
+/*
+ *	multicast prototypes (mcast.c)
+ */
+extern int ipv6_sock_mc_join(struct sock *sk, int ifindex,
+			     const struct in6_addr *addr);
+extern int ipv6_sock_mc_drop(struct sock *sk, int ifindex,
+			     const struct in6_addr *addr);
+extern void ipv6_sock_mc_close(struct sock *sk);
+extern int inet6_mc_check(struct sock *sk,
+			  const struct in6_addr *mc_addr,
+			  const struct in6_addr *src_addr);
+
+extern int ipv6_dev_mc_inc(struct net_device *dev, const struct in6_addr *addr);
+extern int __ipv6_dev_mc_dec(struct inet6_dev *idev, const struct in6_addr *addr);
+extern int ipv6_dev_mc_dec(struct net_device *dev, const struct in6_addr *addr);
+extern void ipv6_mc_up(struct inet6_dev *idev);
+extern void ipv6_mc_down(struct inet6_dev *idev);
+extern void ipv6_mc_unmap(struct inet6_dev *idev);
+extern void ipv6_mc_remap(struct inet6_dev *idev);
+extern void ipv6_mc_init_dev(struct inet6_dev *idev);
+extern void ipv6_mc_destroy_dev(struct inet6_dev *idev);
+extern void addrconf_dad_failure(struct inet6_ifaddr *ifp);
+
+extern int ipv6_chk_mcast_addr(struct net_device *dev,
+			       const struct in6_addr *group,
+			       const struct in6_addr *src_addr);
+extern int ipv6_is_mld(struct sk_buff *skb, int nexthdr);
+
+extern void addrconf_prefix_rcv(struct net_device *dev,
+				u8 *opt, int len, bool sllao);
+
+/*
+ *	anycast prototypes (anycast.c)
+ */
+extern int ipv6_sock_ac_join(struct sock *sk,int ifindex, const struct in6_addr *addr);
+extern int ipv6_sock_ac_drop(struct sock *sk,int ifindex, const struct in6_addr *addr);
+extern void ipv6_sock_ac_close(struct sock *sk);
+
+extern int ipv6_dev_ac_inc(struct net_device *dev, const struct in6_addr *addr);
+extern int __ipv6_dev_ac_dec(struct inet6_dev *idev, const struct in6_addr *addr);
+extern int ipv6_chk_acast_addr(struct net *net, struct net_device *dev,
+			       const struct in6_addr *addr);
+
+
+/* Device notifier */
+extern int register_inet6addr_notifier(struct notifier_block *nb);
+extern int unregister_inet6addr_notifier(struct notifier_block *nb);
+
+/**
+ * __in6_dev_get - get inet6_dev pointer from netdevice
+ * @dev: network device
+ *
+ * Caller must hold rcu_read_lock or RTNL, because this function
+ * does not take a reference on the inet6_dev.
+ */
+static inline struct inet6_dev *__in6_dev_get(const struct net_device *dev)
+{
+	return rcu_dereference_rtnl(dev->ip6_ptr);
+}
+
+/**
+ * in6_dev_get - get inet6_dev pointer from netdevice
+ * @dev: network device
+ *
+ * This version can be used in any context, and takes a reference
+ * on the inet6_dev. Callers must use in6_dev_put() later to
+ * release this reference.
+ */
+static inline struct inet6_dev *in6_dev_get(const struct net_device *dev)
+{
+	struct inet6_dev *idev;
+
+	rcu_read_lock();
+	idev = rcu_dereference(dev->ip6_ptr);
+	if (idev)
+		atomic_inc(&idev->refcnt);
+	rcu_read_unlock();
+	return idev;
+}
+
+extern void in6_dev_finish_destroy(struct inet6_dev *idev);
+
+static inline void in6_dev_put(struct inet6_dev *idev)
+{
+	if (atomic_dec_and_test(&idev->refcnt))
+		in6_dev_finish_destroy(idev);
+}
+
+static inline void __in6_dev_put(struct inet6_dev *idev)
+{
+	atomic_dec(&idev->refcnt);
+}
+
+static inline void in6_dev_hold(struct inet6_dev *idev)
+{
+	atomic_inc(&idev->refcnt);
+}
+
+extern void inet6_ifa_finish_destroy(struct inet6_ifaddr *ifp);
+
+static inline void in6_ifa_put(struct inet6_ifaddr *ifp)
+{
+	if (atomic_dec_and_test(&ifp->refcnt))
+		inet6_ifa_finish_destroy(ifp);
+}
+
+static inline void __in6_ifa_put(struct inet6_ifaddr *ifp)
+{
+	atomic_dec(&ifp->refcnt);
+}
+
+static inline void in6_ifa_hold(struct inet6_ifaddr *ifp)
+{
+	atomic_inc(&ifp->refcnt);
+}
+
+
+/*
+ *	compute link-local solicited-node multicast address
+ */
+
+static inline void addrconf_addr_solict_mult(const struct in6_addr *addr,
+					     struct in6_addr *solicited)
+{
+	ipv6_addr_set(solicited,
+		      htonl(0xFF020000), 0,
+		      htonl(0x1),
+		      htonl(0xFF000000) | addr->s6_addr32[3]);
+}
+
+static inline int ipv6_addr_is_multicast(const struct in6_addr *addr)
+{
+	return (addr->s6_addr32[0] & htonl(0xFF000000)) == htonl(0xFF000000);
+}
+
+static inline int ipv6_addr_is_ll_all_nodes(const struct in6_addr *addr)
+{
+	return ((addr->s6_addr32[0] ^ htonl(0xff020000)) |
+		addr->s6_addr32[1] | addr->s6_addr32[2] |
+		(addr->s6_addr32[3] ^ htonl(0x00000001))) == 0;
+}
+
+static inline int ipv6_addr_is_ll_all_routers(const struct in6_addr *addr)
+{
+	return ((addr->s6_addr32[0] ^ htonl(0xff020000)) |
+		addr->s6_addr32[1] | addr->s6_addr32[2] |
+		(addr->s6_addr32[3] ^ htonl(0x00000002))) == 0;
+}
+
+static inline int ipv6_addr_is_isatap(const struct in6_addr *addr)
+{
+	return (addr->s6_addr32[2] | htonl(0x02000000)) == htonl(0x02005EFE);
+}
+
+#ifdef CONFIG_PROC_FS
+extern int if6_proc_init(void);
+extern void if6_proc_exit(void);
+#endif
+
+#endif
diff --git a/include/net/af_ieee802154.h b/include/net/af_ieee802154.h
new file mode 100644
index 00000000..75e64c7a
--- /dev/null
+++ b/include/net/af_ieee802154.h
@@ -0,0 +1,62 @@
+/*
+ * IEEE 802.15.4 inteface for userspace
+ *
+ * Copyright 2007, 2008 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Sergey Lapin <slapin@ossfans.org>
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ */
+
+#ifndef _AF_IEEE802154_H
+#define _AF_IEEE802154_H
+
+#include <linux/socket.h> /* for sa_family_t */
+
+enum {
+	IEEE802154_ADDR_NONE = 0x0,
+	/* RESERVED = 0x01, */
+	IEEE802154_ADDR_SHORT = 0x2, /* 16-bit address + PANid */
+	IEEE802154_ADDR_LONG = 0x3, /* 64-bit address + PANid */
+};
+
+/* address length, octets */
+#define IEEE802154_ADDR_LEN	8
+
+struct ieee802154_addr {
+	int addr_type;
+	u16 pan_id;
+	union {
+		u8 hwaddr[IEEE802154_ADDR_LEN];
+		u16 short_addr;
+	};
+};
+
+#define IEEE802154_PANID_BROADCAST	0xffff
+#define IEEE802154_ADDR_BROADCAST	0xffff
+#define IEEE802154_ADDR_UNDEF		0xfffe
+
+struct sockaddr_ieee802154 {
+	sa_family_t family; /* AF_IEEE802154 */
+	struct ieee802154_addr addr;
+};
+
+/* get/setsockopt */
+#define SOL_IEEE802154	0
+
+#define WPAN_WANTACK	0
+
+#endif
diff --git a/include/net/af_rxrpc.h b/include/net/af_rxrpc.h
new file mode 100644
index 00000000..03e6e945
--- /dev/null
+++ b/include/net/af_rxrpc.h
@@ -0,0 +1,54 @@
+/* RxRPC kernel service interface definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _NET_RXRPC_H
+#define _NET_RXRPC_H
+
+#include <linux/rxrpc.h>
+
+struct rxrpc_call;
+
+/*
+ * the mark applied to socket buffers that may be intercepted
+ */
+enum {
+	RXRPC_SKB_MARK_DATA,		/* data message */
+	RXRPC_SKB_MARK_FINAL_ACK,	/* final ACK received message */
+	RXRPC_SKB_MARK_BUSY,		/* server busy message */
+	RXRPC_SKB_MARK_REMOTE_ABORT,	/* remote abort message */
+	RXRPC_SKB_MARK_NET_ERROR,	/* network error message */
+	RXRPC_SKB_MARK_LOCAL_ERROR,	/* local error message */
+	RXRPC_SKB_MARK_NEW_CALL,	/* local error message */
+};
+
+typedef void (*rxrpc_interceptor_t)(struct sock *, unsigned long,
+				    struct sk_buff *);
+extern void rxrpc_kernel_intercept_rx_messages(struct socket *,
+					       rxrpc_interceptor_t);
+extern struct rxrpc_call *rxrpc_kernel_begin_call(struct socket *,
+						  struct sockaddr_rxrpc *,
+						  struct key *,
+						  unsigned long,
+						  gfp_t);
+extern int rxrpc_kernel_send_data(struct rxrpc_call *, struct msghdr *,
+				  size_t);
+extern void rxrpc_kernel_abort_call(struct rxrpc_call *, u32);
+extern void rxrpc_kernel_end_call(struct rxrpc_call *);
+extern bool rxrpc_kernel_is_data_last(struct sk_buff *);
+extern u32 rxrpc_kernel_get_abort_code(struct sk_buff *);
+extern int rxrpc_kernel_get_error_number(struct sk_buff *);
+extern void rxrpc_kernel_data_delivered(struct sk_buff *);
+extern void rxrpc_kernel_free_skb(struct sk_buff *);
+extern struct rxrpc_call *rxrpc_kernel_accept_call(struct socket *,
+						   unsigned long);
+extern int rxrpc_kernel_reject_call(struct socket *);
+
+#endif /* _NET_RXRPC_H */
diff --git a/include/net/af_unix.h b/include/net/af_unix.h
new file mode 100644
index 00000000..ca68e2ce
--- /dev/null
+++ b/include/net/af_unix.h
@@ -0,0 +1,78 @@
+#ifndef __LINUX_NET_AFUNIX_H
+#define __LINUX_NET_AFUNIX_H
+
+#include <linux/socket.h>
+#include <linux/un.h>
+#include <linux/mutex.h>
+#include <net/sock.h>
+
+extern void unix_inflight(struct file *fp);
+extern void unix_notinflight(struct file *fp);
+extern void unix_gc(void);
+extern void wait_for_unix_gc(void);
+extern struct sock *unix_get_socket(struct file *filp);
+extern struct sock *unix_peer_get(struct sock *);
+
+#define UNIX_HASH_SIZE	256
+
+extern unsigned int unix_tot_inflight;
+extern spinlock_t unix_table_lock;
+extern struct hlist_head unix_socket_table[UNIX_HASH_SIZE + 1];
+
+struct unix_address {
+	atomic_t	refcnt;
+	int		len;
+	unsigned	hash;
+	struct sockaddr_un name[0];
+};
+
+struct unix_skb_parms {
+	struct pid		*pid;		/* Skb credentials	*/
+	const struct cred	*cred;
+	struct scm_fp_list	*fp;		/* Passed files		*/
+#ifdef CONFIG_SECURITY_NETWORK
+	u32			secid;		/* Security ID		*/
+#endif
+};
+
+#define UNIXCB(skb) 	(*(struct unix_skb_parms *)&((skb)->cb))
+#define UNIXSID(skb)	(&UNIXCB((skb)).secid)
+
+#define unix_state_lock(s)	spin_lock(&unix_sk(s)->lock)
+#define unix_state_unlock(s)	spin_unlock(&unix_sk(s)->lock)
+#define unix_state_lock_nested(s) \
+				spin_lock_nested(&unix_sk(s)->lock, \
+				SINGLE_DEPTH_NESTING)
+
+/* The AF_UNIX socket */
+struct unix_sock {
+	/* WARNING: sk has to be the first member */
+	struct sock		sk;
+	struct unix_address     *addr;
+	struct path		path;
+	struct mutex		readlock;
+	struct sock		*peer;
+	struct sock		*other;
+	struct list_head	link;
+	atomic_long_t		inflight;
+	spinlock_t		lock;
+	unsigned int		gc_candidate : 1;
+	unsigned int		gc_maybe_cycle : 1;
+	unsigned char		recursion_level;
+	struct socket_wq	peer_wq;
+};
+#define unix_sk(__sk) ((struct unix_sock *)__sk)
+
+#define peer_wait peer_wq.wait
+
+long unix_inq_len(struct sock *sk);
+long unix_outq_len(struct sock *sk);
+
+#ifdef CONFIG_SYSCTL
+extern int unix_sysctl_register(struct net *net);
+extern void unix_sysctl_unregister(struct net *net);
+#else
+static inline int unix_sysctl_register(struct net *net) { return 0; }
+static inline void unix_sysctl_unregister(struct net *net) {}
+#endif
+#endif
diff --git a/include/net/ah.h b/include/net/ah.h
new file mode 100644
index 00000000..ca95b989
--- /dev/null
+++ b/include/net/ah.h
@@ -0,0 +1,25 @@
+#ifndef _NET_AH_H
+#define _NET_AH_H
+
+#include <linux/skbuff.h>
+
+/* This is the maximum truncated ICV length that we know of. */
+#define MAX_AH_AUTH_LEN	64
+
+struct crypto_ahash;
+
+struct ah_data {
+	int			icv_full_len;
+	int			icv_trunc_len;
+
+	struct crypto_ahash	*ahash;
+};
+
+struct ip_auth_hdr;
+
+static inline struct ip_auth_hdr *ip_auth_hdr(const struct sk_buff *skb)
+{
+	return (struct ip_auth_hdr *)skb_transport_header(skb);
+}
+
+#endif
diff --git a/include/net/arp.h b/include/net/arp.h
new file mode 100644
index 00000000..4a1f3fb5
--- /dev/null
+++ b/include/net/arp.h
@@ -0,0 +1,59 @@
+/* linux/net/inet/arp.h */
+#ifndef _ARP_H
+#define _ARP_H
+
+#include <linux/if_arp.h>
+#include <net/neighbour.h>
+
+
+extern struct neigh_table arp_tbl;
+
+static inline u32 arp_hashfn(u32 key, const struct net_device *dev, u32 hash_rnd)
+{
+	u32 val = key ^ dev->ifindex;
+
+	return val * hash_rnd;
+}
+
+static inline struct neighbour *__ipv4_neigh_lookup(struct net_device *dev, u32 key)
+{
+	struct neigh_hash_table *nht;
+	struct neighbour *n;
+	u32 hash_val;
+
+	rcu_read_lock_bh();
+	nht = rcu_dereference_bh(arp_tbl.nht);
+	hash_val = arp_hashfn(key, dev, nht->hash_rnd[0]) >> (32 - nht->hash_shift);
+	for (n = rcu_dereference_bh(nht->hash_buckets[hash_val]);
+	     n != NULL;
+	     n = rcu_dereference_bh(n->next)) {
+		if (n->dev == dev && *(u32 *)n->primary_key == key) {
+			if (!atomic_inc_not_zero(&n->refcnt))
+				n = NULL;
+			break;
+		}
+	}
+	rcu_read_unlock_bh();
+
+	return n;
+}
+
+extern void	arp_init(void);
+extern int	arp_find(unsigned char *haddr, struct sk_buff *skb);
+extern int	arp_ioctl(struct net *net, unsigned int cmd, void __user *arg);
+extern void     arp_send(int type, int ptype, __be32 dest_ip,
+			 struct net_device *dev, __be32 src_ip,
+			 const unsigned char *dest_hw,
+			 const unsigned char *src_hw, const unsigned char *th);
+extern int	arp_mc_map(__be32 addr, u8 *haddr, struct net_device *dev, int dir);
+extern void	arp_ifdown(struct net_device *dev);
+
+extern struct sk_buff *arp_create(int type, int ptype, __be32 dest_ip,
+				  struct net_device *dev, __be32 src_ip,
+				  const unsigned char *dest_hw,
+				  const unsigned char *src_hw,
+				  const unsigned char *target_hw);
+extern void arp_xmit(struct sk_buff *skb);
+int arp_invalidate(struct net_device *dev, __be32 ip);
+
+#endif	/* _ARP_H */
diff --git a/include/net/atmclip.h b/include/net/atmclip.h
new file mode 100644
index 00000000..5865924d
--- /dev/null
+++ b/include/net/atmclip.h
@@ -0,0 +1,52 @@
+/* net/atm/atmarp.h - RFC1577 ATM ARP */
+ 
+/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
+ 
+ 
+#ifndef _ATMCLIP_H
+#define _ATMCLIP_H
+
+#include <linux/netdevice.h>
+#include <linux/atm.h>
+#include <linux/atmdev.h>
+#include <linux/atmarp.h>
+#include <linux/spinlock.h>
+#include <net/neighbour.h>
+
+
+#define CLIP_VCC(vcc) ((struct clip_vcc *) ((vcc)->user_back))
+
+struct sk_buff;
+
+struct clip_vcc {
+	struct atm_vcc	*vcc;		/* VCC descriptor */
+	struct atmarp_entry *entry;	/* ATMARP table entry, NULL if IP addr.
+					   isn't known yet */
+	int		xoff;		/* 1 if send buffer is full */
+	unsigned char	encap;		/* 0: NULL, 1: LLC/SNAP */
+	unsigned long	last_use;	/* last send or receive operation */
+	unsigned long	idle_timeout;	/* keep open idle for so many jiffies*/
+	void (*old_push)(struct atm_vcc *vcc,struct sk_buff *skb);
+					/* keep old push fn for chaining */
+	void (*old_pop)(struct atm_vcc *vcc,struct sk_buff *skb);
+					/* keep old pop fn for chaining */
+	struct clip_vcc	*next;		/* next VCC */
+};
+
+
+struct atmarp_entry {
+	struct clip_vcc	*vccs;		/* active VCCs; NULL if resolution is
+					   pending */
+	unsigned long	expires;	/* entry expiration time */
+	struct neighbour *neigh;	/* neighbour back-pointer */
+};
+
+#define PRIV(dev) ((struct clip_priv *) netdev_priv(dev))
+
+struct clip_priv {
+	int number;			/* for convenience ... */
+	spinlock_t xoff_lock;		/* ensures that pop is atomic (SMP) */
+	struct net_device *next;	/* next CLIP interface */
+};
+
+#endif
diff --git a/include/net/ax25.h b/include/net/ax25.h
new file mode 100644
index 00000000..94e09d36
--- /dev/null
+++ b/include/net/ax25.h
@@ -0,0 +1,451 @@
+/*
+ *	Declarations of AX.25 type objects.
+ *
+ *	Alan Cox (GW4PTS) 	10/11/93
+ */
+#ifndef _AX25_H
+#define _AX25_H 
+
+#include <linux/ax25.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/atomic.h>
+
+#define	AX25_T1CLAMPLO  		1
+#define	AX25_T1CLAMPHI 			(30 * HZ)
+
+#define	AX25_BPQ_HEADER_LEN		16
+#define	AX25_KISS_HEADER_LEN		1
+
+#define	AX25_HEADER_LEN			17
+#define	AX25_ADDR_LEN			7
+#define	AX25_DIGI_HEADER_LEN		(AX25_MAX_DIGIS * AX25_ADDR_LEN)
+#define	AX25_MAX_HEADER_LEN		(AX25_HEADER_LEN + AX25_DIGI_HEADER_LEN)
+
+/* AX.25 Protocol IDs */
+#define AX25_P_ROSE			0x01
+#define AX25_P_VJCOMP			0x06	/* Compressed TCP/IP packet   */
+						/* Van Jacobsen (RFC 1144)    */
+#define AX25_P_VJUNCOMP			0x07	/* Uncompressed TCP/IP packet */
+						/* Van Jacobsen (RFC 1144)    */
+#define	AX25_P_SEGMENT			0x08	/* Segmentation fragment      */
+#define AX25_P_TEXNET			0xc3	/* TEXTNET datagram protocol  */
+#define AX25_P_LQ			0xc4	/* Link Quality Protocol      */
+#define AX25_P_ATALK			0xca	/* Appletalk                  */
+#define AX25_P_ATALK_ARP		0xcb	/* Appletalk ARP              */
+#define AX25_P_IP			0xcc	/* ARPA Internet Protocol     */
+#define AX25_P_ARP			0xcd	/* ARPA Address Resolution    */
+#define AX25_P_FLEXNET			0xce	/* FlexNet                    */
+#define AX25_P_NETROM 			0xcf	/* NET/ROM                    */
+#define AX25_P_TEXT 			0xF0	/* No layer 3 protocol impl.  */
+
+/* AX.25 Segment control values */
+#define	AX25_SEG_REM			0x7F
+#define	AX25_SEG_FIRST			0x80
+
+#define AX25_CBIT			0x80	/* Command/Response bit */
+#define AX25_EBIT			0x01	/* HDLC Address Extension bit */
+#define AX25_HBIT			0x80	/* Has been repeated bit */
+
+#define AX25_SSSID_SPARE		0x60	/* Unused bits in SSID for standard AX.25 */
+#define AX25_ESSID_SPARE		0x20	/* Unused bits in SSID for extended AX.25 */
+#define AX25_DAMA_FLAG			0x20	/* Well, it is *NOT* unused! (dl1bke 951121 */
+
+#define	AX25_COND_ACK_PENDING		0x01
+#define	AX25_COND_REJECT		0x02
+#define	AX25_COND_PEER_RX_BUSY		0x04
+#define	AX25_COND_OWN_RX_BUSY		0x08
+#define	AX25_COND_DAMA_MODE		0x10
+
+#ifndef _LINUX_NETDEVICE_H
+#include <linux/netdevice.h>
+#endif
+
+/* Upper sub-layer (LAPB) definitions */
+
+/* Control field templates */
+#define	AX25_I			0x00	/* Information frames */
+#define	AX25_S			0x01	/* Supervisory frames */
+#define	AX25_RR			0x01	/* Receiver ready */
+#define	AX25_RNR		0x05	/* Receiver not ready */
+#define	AX25_REJ		0x09	/* Reject */
+#define	AX25_U			0x03	/* Unnumbered frames */
+#define	AX25_SABM		0x2f	/* Set Asynchronous Balanced Mode */
+#define	AX25_SABME		0x6f	/* Set Asynchronous Balanced Mode Extended */
+#define	AX25_DISC		0x43	/* Disconnect */
+#define	AX25_DM			0x0f	/* Disconnected mode */
+#define	AX25_UA			0x63	/* Unnumbered acknowledge */
+#define	AX25_FRMR		0x87	/* Frame reject */
+#define	AX25_UI			0x03	/* Unnumbered information */
+#define	AX25_XID		0xaf	/* Exchange information */
+#define	AX25_TEST		0xe3	/* Test */
+
+#define	AX25_PF			0x10	/* Poll/final bit for standard AX.25 */
+#define	AX25_EPF		0x01	/* Poll/final bit for extended AX.25 */
+
+#define AX25_ILLEGAL		0x100	/* Impossible to be a real frame type */
+
+#define	AX25_POLLOFF		0
+#define	AX25_POLLON		1
+
+/* AX25 L2 C-bit */
+#define AX25_COMMAND		1
+#define AX25_RESPONSE		2
+
+/* Define Link State constants. */
+
+enum { 
+	AX25_STATE_0,			/* Listening */
+	AX25_STATE_1,			/* SABM sent */
+	AX25_STATE_2,			/* DISC sent */
+	AX25_STATE_3,			/* Established */
+	AX25_STATE_4			/* Recovery */
+};
+
+#define AX25_MODULUS 		8	/*  Standard AX.25 modulus */
+#define	AX25_EMODULUS		128	/*  Extended AX.25 modulus */
+
+enum {
+	AX25_PROTO_STD_SIMPLEX,
+	AX25_PROTO_STD_DUPLEX,
+#ifdef CONFIG_AX25_DAMA_SLAVE
+	AX25_PROTO_DAMA_SLAVE,
+#ifdef CONFIG_AX25_DAMA_MASTER
+	AX25_PROTO_DAMA_MASTER,
+#define AX25_PROTO_MAX AX25_PROTO_DAMA_MASTER
+#endif
+#endif
+	__AX25_PROTO_MAX,
+	AX25_PROTO_MAX = __AX25_PROTO_MAX -1
+};
+
+enum {
+	AX25_VALUES_IPDEFMODE,	/* 0=DG 1=VC */
+	AX25_VALUES_AXDEFMODE,	/* 0=Normal 1=Extended Seq Nos */
+	AX25_VALUES_BACKOFF,	/* 0=None 1=Linear 2=Exponential */
+	AX25_VALUES_CONMODE,	/* Allow connected modes - 0=No 1=no "PID text" 2=all PIDs */
+	AX25_VALUES_WINDOW,	/* Default window size for standard AX.25 */
+	AX25_VALUES_EWINDOW,	/* Default window size for extended AX.25 */
+	AX25_VALUES_T1,		/* Default T1 timeout value */
+	AX25_VALUES_T2,		/* Default T2 timeout value */
+	AX25_VALUES_T3,		/* Default T3 timeout value */
+	AX25_VALUES_IDLE,	/* Connected mode idle timer */
+	AX25_VALUES_N2,		/* Default N2 value */
+	AX25_VALUES_PACLEN,	/* AX.25 MTU */
+	AX25_VALUES_PROTOCOL,	/* Std AX.25, DAMA Slave, DAMA Master */
+	AX25_VALUES_DS_TIMEOUT,	/* DAMA Slave timeout */
+	AX25_MAX_VALUES		/* THIS MUST REMAIN THE LAST ENTRY OF THIS LIST */
+};
+
+#define	AX25_DEF_IPDEFMODE	0			/* Datagram */
+#define	AX25_DEF_AXDEFMODE	0			/* Normal */
+#define	AX25_DEF_BACKOFF	1			/* Linear backoff */
+#define	AX25_DEF_CONMODE	2			/* Connected mode allowed */
+#define	AX25_DEF_WINDOW		2			/* Window=2 */
+#define	AX25_DEF_EWINDOW	32			/* Module-128 Window=32 */
+#define	AX25_DEF_T1		10000			/* T1=10s */
+#define	AX25_DEF_T2		3000			/* T2=3s  */
+#define	AX25_DEF_T3		300000			/* T3=300s */
+#define	AX25_DEF_N2		10			/* N2=10 */
+#define AX25_DEF_IDLE		0			/* Idle=None */
+#define AX25_DEF_PACLEN		256			/* Paclen=256 */
+#define	AX25_DEF_PROTOCOL	AX25_PROTO_STD_SIMPLEX	/* Standard AX.25 */
+#define AX25_DEF_DS_TIMEOUT	180000			/* DAMA timeout 3 minutes */
+
+typedef struct ax25_uid_assoc {
+	struct hlist_node	uid_node;
+	atomic_t		refcount;
+	uid_t			uid;
+	ax25_address		call;
+} ax25_uid_assoc;
+
+#define ax25_uid_for_each(__ax25, node, list) \
+	hlist_for_each_entry(__ax25, node, list, uid_node)
+
+#define ax25_uid_hold(ax25) \
+	atomic_inc(&((ax25)->refcount))
+
+static inline void ax25_uid_put(ax25_uid_assoc *assoc)
+{
+	if (atomic_dec_and_test(&assoc->refcount)) {
+		kfree(assoc);
+	}
+}
+
+typedef struct {
+	ax25_address		calls[AX25_MAX_DIGIS];
+	unsigned char		repeated[AX25_MAX_DIGIS];
+	unsigned char		ndigi;
+	signed char		lastrepeat;
+} ax25_digi;
+
+typedef struct ax25_route {
+	struct ax25_route	*next;
+	atomic_t		refcount;
+	ax25_address		callsign;
+	struct net_device	*dev;
+	ax25_digi		*digipeat;
+	char			ip_mode;
+} ax25_route;
+
+static inline void ax25_hold_route(ax25_route *ax25_rt)
+{
+	atomic_inc(&ax25_rt->refcount);
+}
+
+extern void __ax25_put_route(ax25_route *ax25_rt);
+
+static inline void ax25_put_route(ax25_route *ax25_rt)
+{
+	if (atomic_dec_and_test(&ax25_rt->refcount))
+		__ax25_put_route(ax25_rt);
+}
+
+typedef struct {
+	char			slave;			/* slave_mode?   */
+	struct timer_list	slave_timer;		/* timeout timer */
+	unsigned short		slave_timeout;		/* when? */
+} ax25_dama_info;
+
+struct ctl_table;
+
+typedef struct ax25_dev {
+	struct ax25_dev		*next;
+	struct net_device	*dev;
+	struct net_device	*forward;
+	struct ctl_table	*systable;
+	int			values[AX25_MAX_VALUES];
+#if defined(CONFIG_AX25_DAMA_SLAVE) || defined(CONFIG_AX25_DAMA_MASTER)
+	ax25_dama_info		dama;
+#endif
+} ax25_dev;
+
+typedef struct ax25_cb {
+	struct hlist_node	ax25_node;
+	ax25_address		source_addr, dest_addr;
+	ax25_digi		*digipeat;
+	ax25_dev		*ax25_dev;
+	unsigned char		iamdigi;
+	unsigned char		state, modulus, pidincl;
+	unsigned short		vs, vr, va;
+	unsigned char		condition, backoff;
+	unsigned char		n2, n2count;
+	struct timer_list	t1timer, t2timer, t3timer, idletimer;
+	unsigned long		t1, t2, t3, idle, rtt;
+	unsigned short		paclen, fragno, fraglen;
+	struct sk_buff_head	write_queue;
+	struct sk_buff_head	reseq_queue;
+	struct sk_buff_head	ack_queue;
+	struct sk_buff_head	frag_queue;
+	unsigned char		window;
+	struct timer_list	timer, dtimer;
+	struct sock		*sk;		/* Backlink to socket */
+	atomic_t		refcount;
+} ax25_cb;
+
+#define ax25_sk(__sk) ((ax25_cb *)(__sk)->sk_protinfo)
+
+#define ax25_for_each(__ax25, node, list) \
+	hlist_for_each_entry(__ax25, node, list, ax25_node)
+
+#define ax25_cb_hold(__ax25) \
+	atomic_inc(&((__ax25)->refcount))
+
+static __inline__ void ax25_cb_put(ax25_cb *ax25)
+{
+	if (atomic_dec_and_test(&ax25->refcount)) {
+		kfree(ax25->digipeat);
+		kfree(ax25);
+	}
+}
+
+static inline __be16 ax25_type_trans(struct sk_buff *skb, struct net_device *dev)
+{
+	skb->dev      = dev;
+	skb_reset_mac_header(skb);
+	skb->pkt_type = PACKET_HOST;
+	return htons(ETH_P_AX25);
+}
+
+/* af_ax25.c */
+extern struct hlist_head ax25_list;
+extern spinlock_t ax25_list_lock;
+extern void ax25_cb_add(ax25_cb *);
+struct sock *ax25_find_listener(ax25_address *, int, struct net_device *, int);
+struct sock *ax25_get_socket(ax25_address *, ax25_address *, int);
+extern ax25_cb *ax25_find_cb(ax25_address *, ax25_address *, ax25_digi *, struct net_device *);
+extern void ax25_send_to_raw(ax25_address *, struct sk_buff *, int);
+extern void ax25_destroy_socket(ax25_cb *);
+extern ax25_cb * __must_check ax25_create_cb(void);
+extern void ax25_fillin_cb(ax25_cb *, ax25_dev *);
+extern struct sock *ax25_make_new(struct sock *, struct ax25_dev *);
+
+/* ax25_addr.c */
+extern const ax25_address ax25_bcast;
+extern const ax25_address ax25_defaddr;
+extern const ax25_address null_ax25_address;
+extern char *ax2asc(char *buf, const ax25_address *);
+extern void asc2ax(ax25_address *addr, const char *callsign);
+extern int ax25cmp(const ax25_address *, const ax25_address *);
+extern int ax25digicmp(const ax25_digi *, const ax25_digi *);
+extern const unsigned char *ax25_addr_parse(const unsigned char *, int,
+	ax25_address *, ax25_address *, ax25_digi *, int *, int *);
+extern int  ax25_addr_build(unsigned char *, const ax25_address *,
+	const ax25_address *, const ax25_digi *, int, int);
+extern int  ax25_addr_size(const ax25_digi *);
+extern void ax25_digi_invert(const ax25_digi *, ax25_digi *);
+
+/* ax25_dev.c */
+extern ax25_dev *ax25_dev_list;
+extern spinlock_t ax25_dev_lock;
+
+static inline ax25_dev *ax25_dev_ax25dev(struct net_device *dev)
+{
+	return dev->ax25_ptr;
+}
+
+extern ax25_dev *ax25_addr_ax25dev(ax25_address *);
+extern void ax25_dev_device_up(struct net_device *);
+extern void ax25_dev_device_down(struct net_device *);
+extern int  ax25_fwd_ioctl(unsigned int, struct ax25_fwd_struct *);
+extern struct net_device *ax25_fwd_dev(struct net_device *);
+extern void ax25_dev_free(void);
+
+/* ax25_ds_in.c */
+extern int  ax25_ds_frame_in(ax25_cb *, struct sk_buff *, int);
+
+/* ax25_ds_subr.c */
+extern void ax25_ds_nr_error_recovery(ax25_cb *);
+extern void ax25_ds_enquiry_response(ax25_cb *);
+extern void ax25_ds_establish_data_link(ax25_cb *);
+extern void ax25_dev_dama_off(ax25_dev *);
+extern void ax25_dama_on(ax25_cb *);
+extern void ax25_dama_off(ax25_cb *);
+
+/* ax25_ds_timer.c */
+extern void ax25_ds_setup_timer(ax25_dev *);
+extern void ax25_ds_set_timer(ax25_dev *);
+extern void ax25_ds_del_timer(ax25_dev *);
+extern void ax25_ds_timer(ax25_cb *);
+extern void ax25_ds_t1_timeout(ax25_cb *);
+extern void ax25_ds_heartbeat_expiry(ax25_cb *);
+extern void ax25_ds_t3timer_expiry(ax25_cb *);
+extern void ax25_ds_idletimer_expiry(ax25_cb *);
+
+/* ax25_iface.c */
+
+struct ax25_protocol {
+	struct ax25_protocol *next;
+	unsigned int pid;
+	int (*func)(struct sk_buff *, ax25_cb *);
+};
+
+extern void ax25_register_pid(struct ax25_protocol *ap);
+extern void ax25_protocol_release(unsigned int);
+
+struct ax25_linkfail {
+	struct hlist_node lf_node;
+	void (*func)(ax25_cb *, int);
+};
+
+extern void ax25_linkfail_register(struct ax25_linkfail *lf);
+extern void ax25_linkfail_release(struct ax25_linkfail *lf);
+extern int __must_check ax25_listen_register(ax25_address *,
+	struct net_device *);
+extern void ax25_listen_release(ax25_address *, struct net_device *);
+extern int  (*ax25_protocol_function(unsigned int))(struct sk_buff *, ax25_cb *);
+extern int  ax25_listen_mine(ax25_address *, struct net_device *);
+extern void ax25_link_failed(ax25_cb *, int);
+extern int  ax25_protocol_is_registered(unsigned int);
+
+/* ax25_in.c */
+extern int  ax25_rx_iframe(ax25_cb *, struct sk_buff *);
+extern int  ax25_kiss_rcv(struct sk_buff *, struct net_device *, struct packet_type *, struct net_device *);
+
+/* ax25_ip.c */
+extern int ax25_hard_header(struct sk_buff *, struct net_device *,
+			    unsigned short, const void *,
+			    const void *, unsigned int);
+extern int  ax25_rebuild_header(struct sk_buff *);
+extern const struct header_ops ax25_header_ops;
+
+/* ax25_out.c */
+extern ax25_cb *ax25_send_frame(struct sk_buff *, int, ax25_address *, ax25_address *, ax25_digi *, struct net_device *);
+extern void ax25_output(ax25_cb *, int, struct sk_buff *);
+extern void ax25_kick(ax25_cb *);
+extern void ax25_transmit_buffer(ax25_cb *, struct sk_buff *, int);
+extern void ax25_queue_xmit(struct sk_buff *skb, struct net_device *dev);
+extern int  ax25_check_iframes_acked(ax25_cb *, unsigned short);
+
+/* ax25_route.c */
+extern void ax25_rt_device_down(struct net_device *);
+extern int  ax25_rt_ioctl(unsigned int, void __user *);
+extern const struct file_operations ax25_route_fops;
+extern ax25_route *ax25_get_route(ax25_address *addr, struct net_device *dev);
+extern int  ax25_rt_autobind(ax25_cb *, ax25_address *);
+extern struct sk_buff *ax25_rt_build_path(struct sk_buff *, ax25_address *, ax25_address *, ax25_digi *);
+extern void ax25_rt_free(void);
+
+/* ax25_std_in.c */
+extern int  ax25_std_frame_in(ax25_cb *, struct sk_buff *, int);
+
+/* ax25_std_subr.c */
+extern void ax25_std_nr_error_recovery(ax25_cb *);
+extern void ax25_std_establish_data_link(ax25_cb *);
+extern void ax25_std_transmit_enquiry(ax25_cb *);
+extern void ax25_std_enquiry_response(ax25_cb *);
+extern void ax25_std_timeout_response(ax25_cb *);
+
+/* ax25_std_timer.c */
+extern void ax25_std_heartbeat_expiry(ax25_cb *);
+extern void ax25_std_t1timer_expiry(ax25_cb *);
+extern void ax25_std_t2timer_expiry(ax25_cb *);
+extern void ax25_std_t3timer_expiry(ax25_cb *);
+extern void ax25_std_idletimer_expiry(ax25_cb *);
+
+/* ax25_subr.c */
+extern void ax25_clear_queues(ax25_cb *);
+extern void ax25_frames_acked(ax25_cb *, unsigned short);
+extern void ax25_requeue_frames(ax25_cb *);
+extern int  ax25_validate_nr(ax25_cb *, unsigned short);
+extern int  ax25_decode(ax25_cb *, struct sk_buff *, int *, int *, int *);
+extern void ax25_send_control(ax25_cb *, int, int, int);
+extern void ax25_return_dm(struct net_device *, ax25_address *, ax25_address *, ax25_digi *);
+extern void ax25_calculate_t1(ax25_cb *);
+extern void ax25_calculate_rtt(ax25_cb *);
+extern void ax25_disconnect(ax25_cb *, int);
+
+/* ax25_timer.c */
+extern void ax25_setup_timers(ax25_cb *);
+extern void ax25_start_heartbeat(ax25_cb *);
+extern void ax25_start_t1timer(ax25_cb *);
+extern void ax25_start_t2timer(ax25_cb *);
+extern void ax25_start_t3timer(ax25_cb *);
+extern void ax25_start_idletimer(ax25_cb *);
+extern void ax25_stop_heartbeat(ax25_cb *);
+extern void ax25_stop_t1timer(ax25_cb *);
+extern void ax25_stop_t2timer(ax25_cb *);
+extern void ax25_stop_t3timer(ax25_cb *);
+extern void ax25_stop_idletimer(ax25_cb *);
+extern int  ax25_t1timer_running(ax25_cb *);
+extern unsigned long ax25_display_timer(struct timer_list *);
+
+/* ax25_uid.c */
+extern int  ax25_uid_policy;
+extern ax25_uid_assoc *ax25_findbyuid(uid_t);
+extern int __must_check ax25_uid_ioctl(int, struct sockaddr_ax25 *);
+extern const struct file_operations ax25_uid_fops;
+extern void ax25_uid_free(void);
+
+/* sysctl_net_ax25.c */
+#ifdef CONFIG_SYSCTL
+extern void ax25_register_sysctl(void);
+extern void ax25_unregister_sysctl(void);
+#else
+static inline void ax25_register_sysctl(void) {};
+static inline void ax25_unregister_sysctl(void) {};
+#endif /* CONFIG_SYSCTL */
+
+#endif
diff --git a/include/net/ax88796.h b/include/net/ax88796.h
new file mode 100644
index 00000000..b9a3beca
--- /dev/null
+++ b/include/net/ax88796.h
@@ -0,0 +1,31 @@
+/* include/net/ax88796.h
+ *
+ * Copyright 2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#ifndef __NET_AX88796_PLAT_H
+#define __NET_AX88796_PLAT_H
+
+#define AXFLG_HAS_EEPROM		(1<<0)
+#define AXFLG_MAC_FROMDEV		(1<<1)	/* device already has MAC */
+#define AXFLG_HAS_93CX6			(1<<2)	/* use eeprom_93cx6 driver */
+#define AXFLG_MAC_FROMPLATFORM		(1<<3)	/* MAC given by platform data */
+
+struct ax_plat_data {
+	unsigned int	 flags;
+	unsigned char	 wordlength;	/* 1 or 2 */
+	unsigned char	 dcr_val;	/* default value for DCR */
+	unsigned char	 rcr_val;	/* default value for RCR */
+	unsigned char	 gpoc_val;	/* default value for GPOC */
+	u32		*reg_offsets;	/* register offsets */
+	u8		*mac_addr;	/* MAC addr (only used when
+					   AXFLG_MAC_FROMPLATFORM is used */
+};
+
+#endif /* __NET_AX88796_PLAT_H */
diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
new file mode 100644
index 00000000..a65910bd
--- /dev/null
+++ b/include/net/bluetooth/bluetooth.h
@@ -0,0 +1,290 @@
+/* 
+   BlueZ - Bluetooth protocol stack for Linux
+   Copyright (C) 2000-2001 Qualcomm Incorporated
+
+   Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License version 2 as
+   published by the Free Software Foundation;
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
+   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES 
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 
+   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, 
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS 
+   SOFTWARE IS DISCLAIMED.
+*/
+
+#ifndef __BLUETOOTH_H
+#define __BLUETOOTH_H
+
+#include <asm/types.h>
+#include <asm/byteorder.h>
+#include <linux/list.h>
+#include <linux/poll.h>
+#include <net/sock.h>
+
+#ifndef AF_BLUETOOTH
+#define AF_BLUETOOTH	31
+#define PF_BLUETOOTH	AF_BLUETOOTH
+#endif
+
+/* Bluetooth versions */
+#define BLUETOOTH_VER_1_1	1
+#define BLUETOOTH_VER_1_2	2
+#define BLUETOOTH_VER_2_0	3
+
+/* Reserv for core and drivers use */
+#define BT_SKB_RESERVE	8
+
+#define BTPROTO_L2CAP	0
+#define BTPROTO_HCI	1
+#define BTPROTO_SCO	2
+#define BTPROTO_RFCOMM	3
+#define BTPROTO_BNEP	4
+#define BTPROTO_CMTP	5
+#define BTPROTO_HIDP	6
+#define BTPROTO_AVDTP	7
+
+#define SOL_HCI		0
+#define SOL_L2CAP	6
+#define SOL_SCO		17
+#define SOL_RFCOMM	18
+
+#define BT_SECURITY	4
+struct bt_security {
+	__u8 level;
+	__u8 key_size;
+};
+#define BT_SECURITY_SDP		0
+#define BT_SECURITY_LOW		1
+#define BT_SECURITY_MEDIUM	2
+#define BT_SECURITY_HIGH	3
+
+#define BT_DEFER_SETUP	7
+
+#define BT_FLUSHABLE	8
+
+#define BT_FLUSHABLE_OFF	0
+#define BT_FLUSHABLE_ON		1
+
+#define BT_POWER	9
+struct bt_power {
+	__u8 force_active;
+};
+#define BT_POWER_FORCE_ACTIVE_OFF 0
+#define BT_POWER_FORCE_ACTIVE_ON  1
+
+#define BT_CHANNEL_POLICY	10
+
+/* BR/EDR only (default policy)
+ *   AMP controllers cannot be used.
+ *   Channel move requests from the remote device are denied.
+ *   If the L2CAP channel is currently using AMP, move the channel to BR/EDR.
+ */
+#define BT_CHANNEL_POLICY_BREDR_ONLY		0
+
+/* BR/EDR Preferred
+ *   Allow use of AMP controllers.
+ *   If the L2CAP channel is currently on AMP, move it to BR/EDR.
+ *   Channel move requests from the remote device are allowed.
+ */
+#define BT_CHANNEL_POLICY_BREDR_PREFERRED	1
+
+/* AMP Preferred
+ *   Allow use of AMP controllers
+ *   If the L2CAP channel is currently on BR/EDR and AMP controller
+ *     resources are available, initiate a channel move to AMP.
+ *   Channel move requests from the remote device are allowed.
+ *   If the L2CAP socket has not been connected yet, try to create
+ *     and configure the channel directly on an AMP controller rather
+ *     than BR/EDR.
+ */
+#define BT_CHANNEL_POLICY_AMP_PREFERRED		2
+
+__printf(1, 2)
+int bt_info(const char *fmt, ...);
+__printf(1, 2)
+int bt_err(const char *fmt, ...);
+
+#define BT_INFO(fmt, ...)	bt_info(fmt "\n", ##__VA_ARGS__)
+#define BT_ERR(fmt, ...)	bt_err(fmt "\n", ##__VA_ARGS__)
+#define BT_DBG(fmt, ...)	pr_debug(fmt "\n", ##__VA_ARGS__)
+
+/* Connection and socket states */
+enum {
+	BT_CONNECTED = 1, /* Equal to TCP_ESTABLISHED to make net code happy */
+	BT_OPEN,
+	BT_BOUND,
+	BT_LISTEN,
+	BT_CONNECT,
+	BT_CONNECT2,
+	BT_CONFIG,
+	BT_DISCONN,
+	BT_CLOSED
+};
+
+/* If unused will be removed by compiler */
+static inline const char *state_to_string(int state)
+{
+	switch (state) {
+	case BT_CONNECTED:
+		return "BT_CONNECTED";
+	case BT_OPEN:
+		return "BT_OPEN";
+	case BT_BOUND:
+		return "BT_BOUND";
+	case BT_LISTEN:
+		return "BT_LISTEN";
+	case BT_CONNECT:
+		return "BT_CONNECT";
+	case BT_CONNECT2:
+		return "BT_CONNECT2";
+	case BT_CONFIG:
+		return "BT_CONFIG";
+	case BT_DISCONN:
+		return "BT_DISCONN";
+	case BT_CLOSED:
+		return "BT_CLOSED";
+	}
+
+	return "invalid state";
+}
+
+/* BD Address */
+typedef struct {
+	__u8 b[6];
+} __packed bdaddr_t;
+
+#define BDADDR_ANY   (&(bdaddr_t) {{0, 0, 0, 0, 0, 0}})
+#define BDADDR_LOCAL (&(bdaddr_t) {{0, 0, 0, 0xff, 0xff, 0xff}})
+
+/* Copy, swap, convert BD Address */
+static inline int bacmp(bdaddr_t *ba1, bdaddr_t *ba2)
+{
+	return memcmp(ba1, ba2, sizeof(bdaddr_t));
+}
+static inline void bacpy(bdaddr_t *dst, bdaddr_t *src)
+{
+	memcpy(dst, src, sizeof(bdaddr_t));
+}
+
+void baswap(bdaddr_t *dst, bdaddr_t *src);
+char *batostr(bdaddr_t *ba);
+bdaddr_t *strtoba(char *str);
+
+/* Common socket structures and functions */
+
+#define bt_sk(__sk) ((struct bt_sock *) __sk)
+
+struct bt_sock {
+	struct sock sk;
+	bdaddr_t    src;
+	bdaddr_t    dst;
+	struct list_head accept_q;
+	struct sock *parent;
+	u32 defer_setup;
+	bool suspended;
+};
+
+struct bt_sock_list {
+	struct hlist_head head;
+	rwlock_t          lock;
+};
+
+int  bt_sock_register(int proto, const struct net_proto_family *ops);
+int  bt_sock_unregister(int proto);
+void bt_sock_link(struct bt_sock_list *l, struct sock *s);
+void bt_sock_unlink(struct bt_sock_list *l, struct sock *s);
+int  bt_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
+				struct msghdr *msg, size_t len, int flags);
+int  bt_sock_stream_recvmsg(struct kiocb *iocb, struct socket *sock,
+			struct msghdr *msg, size_t len, int flags);
+uint bt_sock_poll(struct file * file, struct socket *sock, poll_table *wait);
+int  bt_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg);
+int  bt_sock_wait_state(struct sock *sk, int state, unsigned long timeo);
+
+void bt_accept_enqueue(struct sock *parent, struct sock *sk);
+void bt_accept_unlink(struct sock *sk);
+struct sock *bt_accept_dequeue(struct sock *parent, struct socket *newsock);
+
+/* Skb helpers */
+struct bt_skb_cb {
+	__u8 pkt_type;
+	__u8 incoming;
+	__u16 expect;
+	__u16 tx_seq;
+	__u8 retries;
+	__u8 sar;
+	__u8 force_active;
+};
+#define bt_cb(skb) ((struct bt_skb_cb *)((skb)->cb))
+
+static inline struct sk_buff *bt_skb_alloc(unsigned int len, gfp_t how)
+{
+	struct sk_buff *skb;
+
+	if ((skb = alloc_skb(len + BT_SKB_RESERVE, how))) {
+		skb_reserve(skb, BT_SKB_RESERVE);
+		bt_cb(skb)->incoming  = 0;
+	}
+	return skb;
+}
+
+static inline struct sk_buff *bt_skb_send_alloc(struct sock *sk,
+					unsigned long len, int nb, int *err)
+{
+	struct sk_buff *skb;
+
+	release_sock(sk);
+	if ((skb = sock_alloc_send_skb(sk, len + BT_SKB_RESERVE, nb, err))) {
+		skb_reserve(skb, BT_SKB_RESERVE);
+		bt_cb(skb)->incoming  = 0;
+	}
+	lock_sock(sk);
+
+	if (!skb && *err)
+		return NULL;
+
+	*err = sock_error(sk);
+	if (*err)
+		goto out;
+
+	if (sk->sk_shutdown) {
+		*err = -ECONNRESET;
+		goto out;
+	}
+
+	return skb;
+
+out:
+	kfree_skb(skb);
+	return NULL;
+}
+
+int bt_to_errno(__u16 code);
+
+extern int hci_sock_init(void);
+extern void hci_sock_cleanup(void);
+
+extern int bt_sysfs_init(void);
+extern void bt_sysfs_cleanup(void);
+
+extern struct dentry *bt_debugfs;
+
+int l2cap_init(void);
+void l2cap_exit(void);
+
+int sco_init(void);
+void sco_exit(void);
+
+void bt_sock_reclassify_lock(struct sock *sk, int proto);
+
+#endif /* __BLUETOOTH_H */
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
new file mode 100644
index 00000000..78132a8a
--- /dev/null
+++ b/include/net/bluetooth/hci.h
@@ -0,0 +1,1441 @@
+/*
+   BlueZ - Bluetooth protocol stack for Linux
+   Copyright (C) 2000-2001 Qualcomm Incorporated
+
+   Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License version 2 as
+   published by the Free Software Foundation;
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
+   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
+   SOFTWARE IS DISCLAIMED.
+*/
+
+#ifndef __HCI_H
+#define __HCI_H
+
+#define HCI_MAX_ACL_SIZE	1024
+#define HCI_MAX_SCO_SIZE	255
+#define HCI_MAX_EVENT_SIZE	260
+#define HCI_MAX_FRAME_SIZE	(HCI_MAX_ACL_SIZE + 4)
+
+/* HCI dev events */
+#define HCI_DEV_REG			1
+#define HCI_DEV_UNREG			2
+#define HCI_DEV_UP			3
+#define HCI_DEV_DOWN			4
+#define HCI_DEV_SUSPEND			5
+#define HCI_DEV_RESUME			6
+
+/* HCI notify events */
+#define HCI_NOTIFY_CONN_ADD		1
+#define HCI_NOTIFY_CONN_DEL		2
+#define HCI_NOTIFY_VOICE_SETTING	3
+
+/* HCI bus types */
+#define HCI_VIRTUAL	0
+#define HCI_USB		1
+#define HCI_PCCARD	2
+#define HCI_UART	3
+#define HCI_RS232	4
+#define HCI_PCI		5
+#define HCI_SDIO	6
+
+/* HCI controller types */
+#define HCI_BREDR	0x00
+#define HCI_AMP		0x01
+
+/* HCI device quirks */
+enum {
+	HCI_QUIRK_NO_RESET,
+	HCI_QUIRK_RAW_DEVICE,
+	HCI_QUIRK_FIXUP_BUFFER_SIZE
+};
+
+/* HCI device flags */
+enum {
+	HCI_UP,
+	HCI_INIT,
+	HCI_RUNNING,
+
+	HCI_PSCAN,
+	HCI_ISCAN,
+	HCI_AUTH,
+	HCI_ENCRYPT,
+	HCI_INQUIRY,
+
+	HCI_RAW,
+
+	HCI_RESET,
+};
+
+/*
+ * BR/EDR and/or LE controller flags: the flags defined here should represent
+ * states from the controller.
+ */
+enum {
+	HCI_SETUP,
+	HCI_AUTO_OFF,
+	HCI_MGMT,
+	HCI_PAIRABLE,
+	HCI_SERVICE_CACHE,
+	HCI_LINK_KEYS,
+	HCI_DEBUG_KEYS,
+	HCI_UNREGISTER,
+
+	HCI_LE_SCAN,
+	HCI_SSP_ENABLED,
+	HCI_HS_ENABLED,
+	HCI_LE_ENABLED,
+	HCI_CONNECTABLE,
+	HCI_DISCOVERABLE,
+	HCI_LINK_SECURITY,
+	HCI_PENDING_CLASS,
+};
+
+/* HCI ioctl defines */
+#define HCIDEVUP	_IOW('H', 201, int)
+#define HCIDEVDOWN	_IOW('H', 202, int)
+#define HCIDEVRESET	_IOW('H', 203, int)
+#define HCIDEVRESTAT	_IOW('H', 204, int)
+
+#define HCIGETDEVLIST	_IOR('H', 210, int)
+#define HCIGETDEVINFO	_IOR('H', 211, int)
+#define HCIGETCONNLIST	_IOR('H', 212, int)
+#define HCIGETCONNINFO	_IOR('H', 213, int)
+#define HCIGETAUTHINFO	_IOR('H', 215, int)
+
+#define HCISETRAW	_IOW('H', 220, int)
+#define HCISETSCAN	_IOW('H', 221, int)
+#define HCISETAUTH	_IOW('H', 222, int)
+#define HCISETENCRYPT	_IOW('H', 223, int)
+#define HCISETPTYPE	_IOW('H', 224, int)
+#define HCISETLINKPOL	_IOW('H', 225, int)
+#define HCISETLINKMODE	_IOW('H', 226, int)
+#define HCISETACLMTU	_IOW('H', 227, int)
+#define HCISETSCOMTU	_IOW('H', 228, int)
+
+#define HCIBLOCKADDR	_IOW('H', 230, int)
+#define HCIUNBLOCKADDR	_IOW('H', 231, int)
+
+#define HCIINQUIRY	_IOR('H', 240, int)
+
+/* HCI timeouts */
+#define HCI_CONNECT_TIMEOUT	(40000)	/* 40 seconds */
+#define HCI_DISCONN_TIMEOUT	(2000)	/* 2 seconds */
+#define HCI_PAIRING_TIMEOUT	(60000)	/* 60 seconds */
+#define HCI_IDLE_TIMEOUT	(6000)	/* 6 seconds */
+#define HCI_INIT_TIMEOUT	(10000)	/* 10 seconds */
+#define HCI_CMD_TIMEOUT		(1000)	/* 1 seconds */
+#define HCI_ACL_TX_TIMEOUT	(45000)	/* 45 seconds */
+
+/* HCI data types */
+#define HCI_COMMAND_PKT		0x01
+#define HCI_ACLDATA_PKT		0x02
+#define HCI_SCODATA_PKT		0x03
+#define HCI_EVENT_PKT		0x04
+#define HCI_VENDOR_PKT		0xff
+
+/* HCI packet types */
+#define HCI_DM1		0x0008
+#define HCI_DM3		0x0400
+#define HCI_DM5		0x4000
+#define HCI_DH1		0x0010
+#define HCI_DH3		0x0800
+#define HCI_DH5		0x8000
+
+#define HCI_HV1		0x0020
+#define HCI_HV2		0x0040
+#define HCI_HV3		0x0080
+
+#define SCO_PTYPE_MASK	(HCI_HV1 | HCI_HV2 | HCI_HV3)
+#define ACL_PTYPE_MASK	(~SCO_PTYPE_MASK)
+
+/* eSCO packet types */
+#define ESCO_HV1	0x0001
+#define ESCO_HV2	0x0002
+#define ESCO_HV3	0x0004
+#define ESCO_EV3	0x0008
+#define ESCO_EV4	0x0010
+#define ESCO_EV5	0x0020
+#define ESCO_2EV3	0x0040
+#define ESCO_3EV3	0x0080
+#define ESCO_2EV5	0x0100
+#define ESCO_3EV5	0x0200
+
+#define SCO_ESCO_MASK	(ESCO_HV1 | ESCO_HV2 | ESCO_HV3)
+#define EDR_ESCO_MASK	(ESCO_2EV3 | ESCO_3EV3 | ESCO_2EV5 | ESCO_3EV5)
+#define ALL_ESCO_MASK	(SCO_ESCO_MASK | ESCO_EV3 | ESCO_EV4 | ESCO_EV5 | \
+			EDR_ESCO_MASK)
+
+/* ACL flags */
+#define ACL_START_NO_FLUSH	0x00
+#define ACL_CONT		0x01
+#define ACL_START		0x02
+#define ACL_ACTIVE_BCAST	0x04
+#define ACL_PICO_BCAST		0x08
+
+/* Baseband links */
+#define SCO_LINK	0x00
+#define ACL_LINK	0x01
+#define ESCO_LINK	0x02
+/* Low Energy links do not have defined link type. Use invented one */
+#define LE_LINK		0x80
+
+/* LMP features */
+#define LMP_3SLOT	0x01
+#define LMP_5SLOT	0x02
+#define LMP_ENCRYPT	0x04
+#define LMP_SOFFSET	0x08
+#define LMP_TACCURACY	0x10
+#define LMP_RSWITCH	0x20
+#define LMP_HOLD	0x40
+#define LMP_SNIFF	0x80
+
+#define LMP_PARK	0x01
+#define LMP_RSSI	0x02
+#define LMP_QUALITY	0x04
+#define LMP_SCO		0x08
+#define LMP_HV2		0x10
+#define LMP_HV3		0x20
+#define LMP_ULAW	0x40
+#define LMP_ALAW	0x80
+
+#define LMP_CVSD	0x01
+#define LMP_PSCHEME	0x02
+#define LMP_PCONTROL	0x04
+
+#define LMP_RSSI_INQ	0x40
+#define LMP_ESCO	0x80
+
+#define LMP_EV4		0x01
+#define LMP_EV5		0x02
+#define LMP_NO_BREDR	0x20
+#define LMP_LE		0x40
+
+#define LMP_SNIFF_SUBR	0x02
+#define LMP_PAUSE_ENC	0x04
+#define LMP_EDR_ESCO_2M	0x20
+#define LMP_EDR_ESCO_3M	0x40
+#define LMP_EDR_3S_ESCO	0x80
+
+#define LMP_EXT_INQ	0x01
+#define LMP_SIMUL_LE_BR	0x02
+#define LMP_SIMPLE_PAIR	0x08
+#define LMP_NO_FLUSH	0x40
+
+#define LMP_LSTO	0x01
+#define LMP_INQ_TX_PWR	0x02
+#define LMP_EXTFEATURES	0x80
+
+/* Extended LMP features */
+#define LMP_HOST_SSP		0x01
+#define LMP_HOST_LE		0x02
+#define LMP_HOST_LE_BREDR	0x04
+
+/* Connection modes */
+#define HCI_CM_ACTIVE	0x0000
+#define HCI_CM_HOLD	0x0001
+#define HCI_CM_SNIFF	0x0002
+#define HCI_CM_PARK	0x0003
+
+/* Link policies */
+#define HCI_LP_RSWITCH	0x0001
+#define HCI_LP_HOLD	0x0002
+#define HCI_LP_SNIFF	0x0004
+#define HCI_LP_PARK	0x0008
+
+/* Link modes */
+#define HCI_LM_ACCEPT	0x8000
+#define HCI_LM_MASTER	0x0001
+#define HCI_LM_AUTH	0x0002
+#define HCI_LM_ENCRYPT	0x0004
+#define HCI_LM_TRUSTED	0x0008
+#define HCI_LM_RELIABLE	0x0010
+#define HCI_LM_SECURE	0x0020
+
+/* Authentication types */
+#define HCI_AT_NO_BONDING		0x00
+#define HCI_AT_NO_BONDING_MITM		0x01
+#define HCI_AT_DEDICATED_BONDING	0x02
+#define HCI_AT_DEDICATED_BONDING_MITM	0x03
+#define HCI_AT_GENERAL_BONDING		0x04
+#define HCI_AT_GENERAL_BONDING_MITM	0x05
+
+/* Link Key types */
+#define HCI_LK_COMBINATION		0x00
+#define HCI_LK_LOCAL_UNIT		0x01
+#define HCI_LK_REMOTE_UNIT		0x02
+#define HCI_LK_DEBUG_COMBINATION	0x03
+#define HCI_LK_UNAUTH_COMBINATION	0x04
+#define HCI_LK_AUTH_COMBINATION		0x05
+#define HCI_LK_CHANGED_COMBINATION	0x06
+/* The spec doesn't define types for SMP keys, the _MASTER suffix is implied */
+#define HCI_SMP_STK			0x80
+#define HCI_SMP_STK_SLAVE		0x81
+#define HCI_SMP_LTK			0x82
+#define HCI_SMP_LTK_SLAVE		0x83
+
+/* ---- HCI Error Codes ---- */
+#define HCI_ERROR_AUTH_FAILURE		0x05
+#define HCI_ERROR_REJ_BAD_ADDR		0x0f
+#define HCI_ERROR_REMOTE_USER_TERM	0x13
+#define HCI_ERROR_LOCAL_HOST_TERM	0x16
+#define HCI_ERROR_PAIRING_NOT_ALLOWED	0x18
+
+/* Flow control modes */
+#define HCI_FLOW_CTL_MODE_PACKET_BASED	0x00
+#define HCI_FLOW_CTL_MODE_BLOCK_BASED	0x01
+
+/* Extended Inquiry Response field types */
+#define EIR_FLAGS		0x01 /* flags */
+#define EIR_UUID16_SOME		0x02 /* 16-bit UUID, more available */
+#define EIR_UUID16_ALL		0x03 /* 16-bit UUID, all listed */
+#define EIR_UUID32_SOME		0x04 /* 32-bit UUID, more available */
+#define EIR_UUID32_ALL		0x05 /* 32-bit UUID, all listed */
+#define EIR_UUID128_SOME	0x06 /* 128-bit UUID, more available */
+#define EIR_UUID128_ALL		0x07 /* 128-bit UUID, all listed */
+#define EIR_NAME_SHORT		0x08 /* shortened local name */
+#define EIR_NAME_COMPLETE	0x09 /* complete local name */
+#define EIR_TX_POWER		0x0A /* transmit power level */
+#define EIR_CLASS_OF_DEV	0x0D /* Class of Device */
+#define EIR_SSP_HASH_C		0x0E /* Simple Pairing Hash C */
+#define EIR_SSP_RAND_R		0x0F /* Simple Pairing Randomizer R */
+#define EIR_DEVICE_ID		0x10 /* device ID */
+
+/* -----  HCI Commands ---- */
+#define HCI_OP_NOP			0x0000
+
+#define HCI_OP_INQUIRY			0x0401
+struct hci_cp_inquiry {
+	__u8     lap[3];
+	__u8     length;
+	__u8     num_rsp;
+} __packed;
+
+#define HCI_OP_INQUIRY_CANCEL		0x0402
+
+#define HCI_OP_EXIT_PERIODIC_INQ	0x0404
+
+#define HCI_OP_CREATE_CONN		0x0405
+struct hci_cp_create_conn {
+	bdaddr_t bdaddr;
+	__le16   pkt_type;
+	__u8     pscan_rep_mode;
+	__u8     pscan_mode;
+	__le16   clock_offset;
+	__u8     role_switch;
+} __packed;
+
+#define HCI_OP_DISCONNECT		0x0406
+struct hci_cp_disconnect {
+	__le16   handle;
+	__u8     reason;
+} __packed;
+
+#define HCI_OP_ADD_SCO			0x0407
+struct hci_cp_add_sco {
+	__le16   handle;
+	__le16   pkt_type;
+} __packed;
+
+#define HCI_OP_CREATE_CONN_CANCEL	0x0408
+struct hci_cp_create_conn_cancel {
+	bdaddr_t bdaddr;
+} __packed;
+
+#define HCI_OP_ACCEPT_CONN_REQ		0x0409
+struct hci_cp_accept_conn_req {
+	bdaddr_t bdaddr;
+	__u8     role;
+} __packed;
+
+#define HCI_OP_REJECT_CONN_REQ		0x040a
+struct hci_cp_reject_conn_req {
+	bdaddr_t bdaddr;
+	__u8     reason;
+} __packed;
+
+#define HCI_OP_LINK_KEY_REPLY		0x040b
+struct hci_cp_link_key_reply {
+	bdaddr_t bdaddr;
+	__u8     link_key[16];
+} __packed;
+
+#define HCI_OP_LINK_KEY_NEG_REPLY	0x040c
+struct hci_cp_link_key_neg_reply {
+	bdaddr_t bdaddr;
+} __packed;
+
+#define HCI_OP_PIN_CODE_REPLY		0x040d
+struct hci_cp_pin_code_reply {
+	bdaddr_t bdaddr;
+	__u8     pin_len;
+	__u8     pin_code[16];
+} __packed;
+struct hci_rp_pin_code_reply {
+	__u8     status;
+	bdaddr_t bdaddr;
+} __packed;
+
+#define HCI_OP_PIN_CODE_NEG_REPLY	0x040e
+struct hci_cp_pin_code_neg_reply {
+	bdaddr_t bdaddr;
+} __packed;
+struct hci_rp_pin_code_neg_reply {
+	__u8     status;
+	bdaddr_t bdaddr;
+} __packed;
+
+#define HCI_OP_CHANGE_CONN_PTYPE	0x040f
+struct hci_cp_change_conn_ptype {
+	__le16   handle;
+	__le16   pkt_type;
+} __packed;
+
+#define HCI_OP_AUTH_REQUESTED		0x0411
+struct hci_cp_auth_requested {
+	__le16   handle;
+} __packed;
+
+#define HCI_OP_SET_CONN_ENCRYPT		0x0413
+struct hci_cp_set_conn_encrypt {
+	__le16   handle;
+	__u8     encrypt;
+} __packed;
+
+#define HCI_OP_CHANGE_CONN_LINK_KEY	0x0415
+struct hci_cp_change_conn_link_key {
+	__le16   handle;
+} __packed;
+
+#define HCI_OP_REMOTE_NAME_REQ		0x0419
+struct hci_cp_remote_name_req {
+	bdaddr_t bdaddr;
+	__u8     pscan_rep_mode;
+	__u8     pscan_mode;
+	__le16   clock_offset;
+} __packed;
+
+#define HCI_OP_REMOTE_NAME_REQ_CANCEL	0x041a
+struct hci_cp_remote_name_req_cancel {
+	bdaddr_t bdaddr;
+} __packed;
+
+#define HCI_OP_READ_REMOTE_FEATURES	0x041b
+struct hci_cp_read_remote_features {
+	__le16   handle;
+} __packed;
+
+#define HCI_OP_READ_REMOTE_EXT_FEATURES	0x041c
+struct hci_cp_read_remote_ext_features {
+	__le16   handle;
+	__u8     page;
+} __packed;
+
+#define HCI_OP_READ_REMOTE_VERSION	0x041d
+struct hci_cp_read_remote_version {
+	__le16   handle;
+} __packed;
+
+#define HCI_OP_SETUP_SYNC_CONN		0x0428
+struct hci_cp_setup_sync_conn {
+	__le16   handle;
+	__le32   tx_bandwidth;
+	__le32   rx_bandwidth;
+	__le16   max_latency;
+	__le16   voice_setting;
+	__u8     retrans_effort;
+	__le16   pkt_type;
+} __packed;
+
+#define HCI_OP_ACCEPT_SYNC_CONN_REQ	0x0429
+struct hci_cp_accept_sync_conn_req {
+	bdaddr_t bdaddr;
+	__le32   tx_bandwidth;
+	__le32   rx_bandwidth;
+	__le16   max_latency;
+	__le16   content_format;
+	__u8     retrans_effort;
+	__le16   pkt_type;
+} __packed;
+
+#define HCI_OP_REJECT_SYNC_CONN_REQ	0x042a
+struct hci_cp_reject_sync_conn_req {
+	bdaddr_t bdaddr;
+	__u8     reason;
+} __packed;
+
+#define HCI_OP_IO_CAPABILITY_REPLY	0x042b
+struct hci_cp_io_capability_reply {
+	bdaddr_t bdaddr;
+	__u8     capability;
+	__u8     oob_data;
+	__u8     authentication;
+} __packed;
+
+#define HCI_OP_USER_CONFIRM_REPLY		0x042c
+struct hci_cp_user_confirm_reply {
+	bdaddr_t bdaddr;
+} __packed;
+struct hci_rp_user_confirm_reply {
+	__u8     status;
+	bdaddr_t bdaddr;
+} __packed;
+
+#define HCI_OP_USER_CONFIRM_NEG_REPLY	0x042d
+
+#define HCI_OP_USER_PASSKEY_REPLY		0x042e
+struct hci_cp_user_passkey_reply {
+	bdaddr_t bdaddr;
+	__le32	passkey;
+} __packed;
+
+#define HCI_OP_USER_PASSKEY_NEG_REPLY	0x042f
+
+#define HCI_OP_REMOTE_OOB_DATA_REPLY	0x0430
+struct hci_cp_remote_oob_data_reply {
+	bdaddr_t bdaddr;
+	__u8     hash[16];
+	__u8     randomizer[16];
+} __packed;
+
+#define HCI_OP_REMOTE_OOB_DATA_NEG_REPLY	0x0433
+struct hci_cp_remote_oob_data_neg_reply {
+	bdaddr_t bdaddr;
+} __packed;
+
+#define HCI_OP_IO_CAPABILITY_NEG_REPLY	0x0434
+struct hci_cp_io_capability_neg_reply {
+	bdaddr_t bdaddr;
+	__u8     reason;
+} __packed;
+
+#define HCI_OP_SNIFF_MODE		0x0803
+struct hci_cp_sniff_mode {
+	__le16   handle;
+	__le16   max_interval;
+	__le16   min_interval;
+	__le16   attempt;
+	__le16   timeout;
+} __packed;
+
+#define HCI_OP_EXIT_SNIFF_MODE		0x0804
+struct hci_cp_exit_sniff_mode {
+	__le16   handle;
+} __packed;
+
+#define HCI_OP_ROLE_DISCOVERY		0x0809
+struct hci_cp_role_discovery {
+	__le16   handle;
+} __packed;
+struct hci_rp_role_discovery {
+	__u8     status;
+	__le16   handle;
+	__u8     role;
+} __packed;
+
+#define HCI_OP_SWITCH_ROLE		0x080b
+struct hci_cp_switch_role {
+	bdaddr_t bdaddr;
+	__u8     role;
+} __packed;
+
+#define HCI_OP_READ_LINK_POLICY		0x080c
+struct hci_cp_read_link_policy {
+	__le16   handle;
+} __packed;
+struct hci_rp_read_link_policy {
+	__u8     status;
+	__le16   handle;
+	__le16   policy;
+} __packed;
+
+#define HCI_OP_WRITE_LINK_POLICY	0x080d
+struct hci_cp_write_link_policy {
+	__le16   handle;
+	__le16   policy;
+} __packed;
+struct hci_rp_write_link_policy {
+	__u8     status;
+	__le16   handle;
+} __packed;
+
+#define HCI_OP_READ_DEF_LINK_POLICY	0x080e
+struct hci_rp_read_def_link_policy {
+	__u8     status;
+	__le16   policy;
+} __packed;
+
+#define HCI_OP_WRITE_DEF_LINK_POLICY	0x080f
+struct hci_cp_write_def_link_policy {
+	__le16   policy;
+} __packed;
+
+#define HCI_OP_SNIFF_SUBRATE		0x0811
+struct hci_cp_sniff_subrate {
+	__le16   handle;
+	__le16   max_latency;
+	__le16   min_remote_timeout;
+	__le16   min_local_timeout;
+} __packed;
+
+#define HCI_OP_SET_EVENT_MASK		0x0c01
+struct hci_cp_set_event_mask {
+	__u8     mask[8];
+} __packed;
+
+#define HCI_OP_RESET			0x0c03
+
+#define HCI_OP_SET_EVENT_FLT		0x0c05
+struct hci_cp_set_event_flt {
+	__u8     flt_type;
+	__u8     cond_type;
+	__u8     condition[0];
+} __packed;
+
+/* Filter types */
+#define HCI_FLT_CLEAR_ALL	0x00
+#define HCI_FLT_INQ_RESULT	0x01
+#define HCI_FLT_CONN_SETUP	0x02
+
+/* CONN_SETUP Condition types */
+#define HCI_CONN_SETUP_ALLOW_ALL	0x00
+#define HCI_CONN_SETUP_ALLOW_CLASS	0x01
+#define HCI_CONN_SETUP_ALLOW_BDADDR	0x02
+
+/* CONN_SETUP Conditions */
+#define HCI_CONN_SETUP_AUTO_OFF	0x01
+#define HCI_CONN_SETUP_AUTO_ON	0x02
+
+#define HCI_OP_DELETE_STORED_LINK_KEY	0x0c12
+struct hci_cp_delete_stored_link_key {
+	bdaddr_t bdaddr;
+	__u8     delete_all;
+} __packed;
+
+#define HCI_MAX_NAME_LENGTH		248
+
+#define HCI_OP_WRITE_LOCAL_NAME		0x0c13
+struct hci_cp_write_local_name {
+	__u8     name[HCI_MAX_NAME_LENGTH];
+} __packed;
+
+#define HCI_OP_READ_LOCAL_NAME		0x0c14
+struct hci_rp_read_local_name {
+	__u8     status;
+	__u8     name[HCI_MAX_NAME_LENGTH];
+} __packed;
+
+#define HCI_OP_WRITE_CA_TIMEOUT		0x0c16
+
+#define HCI_OP_WRITE_PG_TIMEOUT		0x0c18
+
+#define HCI_OP_WRITE_SCAN_ENABLE	0x0c1a
+	#define SCAN_DISABLED		0x00
+	#define SCAN_INQUIRY		0x01
+	#define SCAN_PAGE		0x02
+
+#define HCI_OP_READ_AUTH_ENABLE		0x0c1f
+
+#define HCI_OP_WRITE_AUTH_ENABLE	0x0c20
+	#define AUTH_DISABLED		0x00
+	#define AUTH_ENABLED		0x01
+
+#define HCI_OP_READ_ENCRYPT_MODE	0x0c21
+
+#define HCI_OP_WRITE_ENCRYPT_MODE	0x0c22
+	#define ENCRYPT_DISABLED	0x00
+	#define ENCRYPT_P2P		0x01
+	#define ENCRYPT_BOTH		0x02
+
+#define HCI_OP_READ_CLASS_OF_DEV	0x0c23
+struct hci_rp_read_class_of_dev {
+	__u8     status;
+	__u8     dev_class[3];
+} __packed;
+
+#define HCI_OP_WRITE_CLASS_OF_DEV	0x0c24
+struct hci_cp_write_class_of_dev {
+	__u8     dev_class[3];
+} __packed;
+
+#define HCI_OP_READ_VOICE_SETTING	0x0c25
+struct hci_rp_read_voice_setting {
+	__u8     status;
+	__le16   voice_setting;
+} __packed;
+
+#define HCI_OP_WRITE_VOICE_SETTING	0x0c26
+struct hci_cp_write_voice_setting {
+	__le16   voice_setting;
+} __packed;
+
+#define HCI_OP_HOST_BUFFER_SIZE		0x0c33
+struct hci_cp_host_buffer_size {
+	__le16   acl_mtu;
+	__u8     sco_mtu;
+	__le16   acl_max_pkt;
+	__le16   sco_max_pkt;
+} __packed;
+
+#define HCI_OP_WRITE_INQUIRY_MODE	0x0c45
+
+#define HCI_MAX_EIR_LENGTH		240
+
+#define HCI_OP_WRITE_EIR		0x0c52
+struct hci_cp_write_eir {
+	__u8	fec;
+	__u8	data[HCI_MAX_EIR_LENGTH];
+} __packed;
+
+#define HCI_OP_READ_SSP_MODE		0x0c55
+struct hci_rp_read_ssp_mode {
+	__u8     status;
+	__u8     mode;
+} __packed;
+
+#define HCI_OP_WRITE_SSP_MODE		0x0c56
+struct hci_cp_write_ssp_mode {
+	__u8     mode;
+} __packed;
+
+#define HCI_OP_READ_LOCAL_OOB_DATA		0x0c57
+struct hci_rp_read_local_oob_data {
+	__u8     status;
+	__u8     hash[16];
+	__u8     randomizer[16];
+} __packed;
+
+#define HCI_OP_READ_INQ_RSP_TX_POWER	0x0c58
+
+#define HCI_OP_READ_FLOW_CONTROL_MODE	0x0c66
+struct hci_rp_read_flow_control_mode {
+	__u8     status;
+	__u8     mode;
+} __packed;
+
+#define HCI_OP_WRITE_LE_HOST_SUPPORTED	0x0c6d
+struct hci_cp_write_le_host_supported {
+	__u8	le;
+	__u8	simul;
+} __packed;
+
+#define HCI_OP_READ_LOCAL_VERSION	0x1001
+struct hci_rp_read_local_version {
+	__u8     status;
+	__u8     hci_ver;
+	__le16   hci_rev;
+	__u8     lmp_ver;
+	__le16   manufacturer;
+	__le16   lmp_subver;
+} __packed;
+
+#define HCI_OP_READ_LOCAL_COMMANDS	0x1002
+struct hci_rp_read_local_commands {
+	__u8     status;
+	__u8     commands[64];
+} __packed;
+
+#define HCI_OP_READ_LOCAL_FEATURES	0x1003
+struct hci_rp_read_local_features {
+	__u8     status;
+	__u8     features[8];
+} __packed;
+
+#define HCI_OP_READ_LOCAL_EXT_FEATURES	0x1004
+struct hci_cp_read_local_ext_features {
+	__u8     page;
+} __packed;
+struct hci_rp_read_local_ext_features {
+	__u8     status;
+	__u8     page;
+	__u8     max_page;
+	__u8     features[8];
+} __packed;
+
+#define HCI_OP_READ_BUFFER_SIZE		0x1005
+struct hci_rp_read_buffer_size {
+	__u8     status;
+	__le16   acl_mtu;
+	__u8     sco_mtu;
+	__le16   acl_max_pkt;
+	__le16   sco_max_pkt;
+} __packed;
+
+#define HCI_OP_READ_BD_ADDR		0x1009
+struct hci_rp_read_bd_addr {
+	__u8     status;
+	bdaddr_t bdaddr;
+} __packed;
+
+#define HCI_OP_READ_DATA_BLOCK_SIZE	0x100a
+struct hci_rp_read_data_block_size {
+	__u8     status;
+	__le16   max_acl_len;
+	__le16   block_len;
+	__le16   num_blocks;
+} __packed;
+
+#define HCI_OP_WRITE_PAGE_SCAN_ACTIVITY	0x0c1c
+struct hci_cp_write_page_scan_activity {
+	__le16   interval;
+	__le16   window;
+} __packed;
+
+#define HCI_OP_WRITE_PAGE_SCAN_TYPE	0x0c47
+	#define PAGE_SCAN_TYPE_STANDARD		0x00
+	#define PAGE_SCAN_TYPE_INTERLACED	0x01
+
+#define HCI_OP_READ_LOCAL_AMP_INFO	0x1409
+struct hci_rp_read_local_amp_info {
+	__u8     status;
+	__u8     amp_status;
+	__le32   total_bw;
+	__le32   max_bw;
+	__le32   min_latency;
+	__le32   max_pdu;
+	__u8     amp_type;
+	__le16   pal_cap;
+	__le16   max_assoc_size;
+	__le32   max_flush_to;
+	__le32   be_flush_to;
+} __packed;
+
+#define HCI_OP_LE_SET_EVENT_MASK	0x2001
+struct hci_cp_le_set_event_mask {
+	__u8     mask[8];
+} __packed;
+
+#define HCI_OP_LE_READ_BUFFER_SIZE	0x2002
+struct hci_rp_le_read_buffer_size {
+	__u8     status;
+	__le16   le_mtu;
+	__u8     le_max_pkt;
+} __packed;
+
+#define HCI_OP_LE_SET_SCAN_PARAM	0x200b
+struct hci_cp_le_set_scan_param {
+	__u8    type;
+	__le16  interval;
+	__le16  window;
+	__u8    own_address_type;
+	__u8    filter_policy;
+} __packed;
+
+#define LE_SCANNING_DISABLED		0x00
+#define LE_SCANNING_ENABLED		0x01
+
+#define HCI_OP_LE_SET_SCAN_ENABLE	0x200c
+struct hci_cp_le_set_scan_enable {
+	__u8     enable;
+	__u8     filter_dup;
+} __packed;
+
+#define HCI_OP_LE_CREATE_CONN		0x200d
+struct hci_cp_le_create_conn {
+	__le16   scan_interval;
+	__le16   scan_window;
+	__u8     filter_policy;
+	__u8     peer_addr_type;
+	bdaddr_t peer_addr;
+	__u8     own_address_type;
+	__le16   conn_interval_min;
+	__le16   conn_interval_max;
+	__le16   conn_latency;
+	__le16   supervision_timeout;
+	__le16   min_ce_len;
+	__le16   max_ce_len;
+} __packed;
+
+#define HCI_OP_LE_CREATE_CONN_CANCEL	0x200e
+
+#define HCI_OP_LE_CONN_UPDATE		0x2013
+struct hci_cp_le_conn_update {
+	__le16   handle;
+	__le16   conn_interval_min;
+	__le16   conn_interval_max;
+	__le16   conn_latency;
+	__le16   supervision_timeout;
+	__le16   min_ce_len;
+	__le16   max_ce_len;
+} __packed;
+
+#define HCI_OP_LE_START_ENC		0x2019
+struct hci_cp_le_start_enc {
+	__le16	handle;
+	__u8	rand[8];
+	__le16	ediv;
+	__u8	ltk[16];
+} __packed;
+
+#define HCI_OP_LE_LTK_REPLY		0x201a
+struct hci_cp_le_ltk_reply {
+	__le16	handle;
+	__u8	ltk[16];
+} __packed;
+struct hci_rp_le_ltk_reply {
+	__u8	status;
+	__le16	handle;
+} __packed;
+
+#define HCI_OP_LE_LTK_NEG_REPLY		0x201b
+struct hci_cp_le_ltk_neg_reply {
+	__le16	handle;
+} __packed;
+struct hci_rp_le_ltk_neg_reply {
+	__u8	status;
+	__le16	handle;
+} __packed;
+
+/* ---- HCI Events ---- */
+#define HCI_EV_INQUIRY_COMPLETE		0x01
+
+#define HCI_EV_INQUIRY_RESULT		0x02
+struct inquiry_info {
+	bdaddr_t bdaddr;
+	__u8     pscan_rep_mode;
+	__u8     pscan_period_mode;
+	__u8     pscan_mode;
+	__u8     dev_class[3];
+	__le16   clock_offset;
+} __packed;
+
+#define HCI_EV_CONN_COMPLETE		0x03
+struct hci_ev_conn_complete {
+	__u8     status;
+	__le16   handle;
+	bdaddr_t bdaddr;
+	__u8     link_type;
+	__u8     encr_mode;
+} __packed;
+
+#define HCI_EV_CONN_REQUEST		0x04
+struct hci_ev_conn_request {
+	bdaddr_t bdaddr;
+	__u8     dev_class[3];
+	__u8     link_type;
+} __packed;
+
+#define HCI_EV_DISCONN_COMPLETE		0x05
+struct hci_ev_disconn_complete {
+	__u8     status;
+	__le16   handle;
+	__u8     reason;
+} __packed;
+
+#define HCI_EV_AUTH_COMPLETE		0x06
+struct hci_ev_auth_complete {
+	__u8     status;
+	__le16   handle;
+} __packed;
+
+#define HCI_EV_REMOTE_NAME		0x07
+struct hci_ev_remote_name {
+	__u8     status;
+	bdaddr_t bdaddr;
+	__u8     name[HCI_MAX_NAME_LENGTH];
+} __packed;
+
+#define HCI_EV_ENCRYPT_CHANGE		0x08
+struct hci_ev_encrypt_change {
+	__u8     status;
+	__le16   handle;
+	__u8     encrypt;
+} __packed;
+
+#define HCI_EV_CHANGE_LINK_KEY_COMPLETE	0x09
+struct hci_ev_change_link_key_complete {
+	__u8     status;
+	__le16   handle;
+} __packed;
+
+#define HCI_EV_REMOTE_FEATURES		0x0b
+struct hci_ev_remote_features {
+	__u8     status;
+	__le16   handle;
+	__u8     features[8];
+} __packed;
+
+#define HCI_EV_REMOTE_VERSION		0x0c
+struct hci_ev_remote_version {
+	__u8     status;
+	__le16   handle;
+	__u8     lmp_ver;
+	__le16   manufacturer;
+	__le16   lmp_subver;
+} __packed;
+
+#define HCI_EV_QOS_SETUP_COMPLETE	0x0d
+struct hci_qos {
+	__u8     service_type;
+	__u32    token_rate;
+	__u32    peak_bandwidth;
+	__u32    latency;
+	__u32    delay_variation;
+} __packed;
+struct hci_ev_qos_setup_complete {
+	__u8     status;
+	__le16   handle;
+	struct   hci_qos qos;
+} __packed;
+
+#define HCI_EV_CMD_COMPLETE		0x0e
+struct hci_ev_cmd_complete {
+	__u8     ncmd;
+	__le16   opcode;
+} __packed;
+
+#define HCI_EV_CMD_STATUS		0x0f
+struct hci_ev_cmd_status {
+	__u8     status;
+	__u8     ncmd;
+	__le16   opcode;
+} __packed;
+
+#define HCI_EV_ROLE_CHANGE		0x12
+struct hci_ev_role_change {
+	__u8     status;
+	bdaddr_t bdaddr;
+	__u8     role;
+} __packed;
+
+#define HCI_EV_NUM_COMP_PKTS		0x13
+struct hci_comp_pkts_info {
+	__le16   handle;
+	__le16   count;
+} __packed;
+
+struct hci_ev_num_comp_pkts {
+	__u8     num_hndl;
+	struct hci_comp_pkts_info handles[0];
+} __packed;
+
+#define HCI_EV_MODE_CHANGE		0x14
+struct hci_ev_mode_change {
+	__u8     status;
+	__le16   handle;
+	__u8     mode;
+	__le16   interval;
+} __packed;
+
+#define HCI_EV_PIN_CODE_REQ		0x16
+struct hci_ev_pin_code_req {
+	bdaddr_t bdaddr;
+} __packed;
+
+#define HCI_EV_LINK_KEY_REQ		0x17
+struct hci_ev_link_key_req {
+	bdaddr_t bdaddr;
+} __packed;
+
+#define HCI_EV_LINK_KEY_NOTIFY		0x18
+struct hci_ev_link_key_notify {
+	bdaddr_t bdaddr;
+	__u8     link_key[16];
+	__u8     key_type;
+} __packed;
+
+#define HCI_EV_CLOCK_OFFSET		0x1c
+struct hci_ev_clock_offset {
+	__u8     status;
+	__le16   handle;
+	__le16   clock_offset;
+} __packed;
+
+#define HCI_EV_PKT_TYPE_CHANGE		0x1d
+struct hci_ev_pkt_type_change {
+	__u8     status;
+	__le16   handle;
+	__le16   pkt_type;
+} __packed;
+
+#define HCI_EV_PSCAN_REP_MODE		0x20
+struct hci_ev_pscan_rep_mode {
+	bdaddr_t bdaddr;
+	__u8     pscan_rep_mode;
+} __packed;
+
+#define HCI_EV_INQUIRY_RESULT_WITH_RSSI	0x22
+struct inquiry_info_with_rssi {
+	bdaddr_t bdaddr;
+	__u8     pscan_rep_mode;
+	__u8     pscan_period_mode;
+	__u8     dev_class[3];
+	__le16   clock_offset;
+	__s8     rssi;
+} __packed;
+struct inquiry_info_with_rssi_and_pscan_mode {
+	bdaddr_t bdaddr;
+	__u8     pscan_rep_mode;
+	__u8     pscan_period_mode;
+	__u8     pscan_mode;
+	__u8     dev_class[3];
+	__le16   clock_offset;
+	__s8     rssi;
+} __packed;
+
+#define HCI_EV_REMOTE_EXT_FEATURES	0x23
+struct hci_ev_remote_ext_features {
+	__u8     status;
+	__le16   handle;
+	__u8     page;
+	__u8     max_page;
+	__u8     features[8];
+} __packed;
+
+#define HCI_EV_SYNC_CONN_COMPLETE	0x2c
+struct hci_ev_sync_conn_complete {
+	__u8     status;
+	__le16   handle;
+	bdaddr_t bdaddr;
+	__u8     link_type;
+	__u8     tx_interval;
+	__u8     retrans_window;
+	__le16   rx_pkt_len;
+	__le16   tx_pkt_len;
+	__u8     air_mode;
+} __packed;
+
+#define HCI_EV_SYNC_CONN_CHANGED	0x2d
+struct hci_ev_sync_conn_changed {
+	__u8     status;
+	__le16   handle;
+	__u8     tx_interval;
+	__u8     retrans_window;
+	__le16   rx_pkt_len;
+	__le16   tx_pkt_len;
+} __packed;
+
+#define HCI_EV_SNIFF_SUBRATE		0x2e
+struct hci_ev_sniff_subrate {
+	__u8     status;
+	__le16   handle;
+	__le16   max_tx_latency;
+	__le16   max_rx_latency;
+	__le16   max_remote_timeout;
+	__le16   max_local_timeout;
+} __packed;
+
+#define HCI_EV_EXTENDED_INQUIRY_RESULT	0x2f
+struct extended_inquiry_info {
+	bdaddr_t bdaddr;
+	__u8     pscan_rep_mode;
+	__u8     pscan_period_mode;
+	__u8     dev_class[3];
+	__le16   clock_offset;
+	__s8     rssi;
+	__u8     data[240];
+} __packed;
+
+#define HCI_EV_IO_CAPA_REQUEST		0x31
+struct hci_ev_io_capa_request {
+	bdaddr_t bdaddr;
+} __packed;
+
+#define HCI_EV_IO_CAPA_REPLY		0x32
+struct hci_ev_io_capa_reply {
+	bdaddr_t bdaddr;
+	__u8     capability;
+	__u8     oob_data;
+	__u8     authentication;
+} __packed;
+
+#define HCI_EV_USER_CONFIRM_REQUEST	0x33
+struct hci_ev_user_confirm_req {
+	bdaddr_t	bdaddr;
+	__le32		passkey;
+} __packed;
+
+#define HCI_EV_USER_PASSKEY_REQUEST	0x34
+struct hci_ev_user_passkey_req {
+	bdaddr_t	bdaddr;
+} __packed;
+
+#define HCI_EV_REMOTE_OOB_DATA_REQUEST	0x35
+struct hci_ev_remote_oob_data_request {
+	bdaddr_t bdaddr;
+} __packed;
+
+#define HCI_EV_SIMPLE_PAIR_COMPLETE	0x36
+struct hci_ev_simple_pair_complete {
+	__u8     status;
+	bdaddr_t bdaddr;
+} __packed;
+
+#define HCI_EV_REMOTE_HOST_FEATURES	0x3d
+struct hci_ev_remote_host_features {
+	bdaddr_t bdaddr;
+	__u8     features[8];
+} __packed;
+
+#define HCI_EV_LE_META			0x3e
+struct hci_ev_le_meta {
+	__u8     subevent;
+} __packed;
+
+#define HCI_EV_NUM_COMP_BLOCKS		0x48
+struct hci_comp_blocks_info {
+	__le16   handle;
+	__le16   pkts;
+	__le16   blocks;
+} __packed;
+
+struct hci_ev_num_comp_blocks {
+	__le16   num_blocks;
+	__u8     num_hndl;
+	struct hci_comp_blocks_info handles[0];
+} __packed;
+
+/* Low energy meta events */
+#define HCI_EV_LE_CONN_COMPLETE		0x01
+struct hci_ev_le_conn_complete {
+	__u8     status;
+	__le16   handle;
+	__u8     role;
+	__u8     bdaddr_type;
+	bdaddr_t bdaddr;
+	__le16   interval;
+	__le16   latency;
+	__le16   supervision_timeout;
+	__u8     clk_accurancy;
+} __packed;
+
+#define HCI_EV_LE_LTK_REQ		0x05
+struct hci_ev_le_ltk_req {
+	__le16	handle;
+	__u8	random[8];
+	__le16	ediv;
+} __packed;
+
+/* Advertising report event types */
+#define ADV_IND		0x00
+#define ADV_DIRECT_IND	0x01
+#define ADV_SCAN_IND	0x02
+#define ADV_NONCONN_IND	0x03
+#define ADV_SCAN_RSP	0x04
+
+#define ADDR_LE_DEV_PUBLIC	0x00
+#define ADDR_LE_DEV_RANDOM	0x01
+
+#define HCI_EV_LE_ADVERTISING_REPORT	0x02
+struct hci_ev_le_advertising_info {
+	__u8	 evt_type;
+	__u8	 bdaddr_type;
+	bdaddr_t bdaddr;
+	__u8	 length;
+	__u8	 data[0];
+} __packed;
+
+/* Internal events generated by Bluetooth stack */
+#define HCI_EV_STACK_INTERNAL	0xfd
+struct hci_ev_stack_internal {
+	__u16    type;
+	__u8     data[0];
+} __packed;
+
+#define HCI_EV_SI_DEVICE	0x01
+struct hci_ev_si_device {
+	__u16    event;
+	__u16    dev_id;
+} __packed;
+
+#define HCI_EV_SI_SECURITY	0x02
+struct hci_ev_si_security {
+	__u16    event;
+	__u16    proto;
+	__u16    subproto;
+	__u8     incoming;
+} __packed;
+
+/* ---- HCI Packet structures ---- */
+#define HCI_COMMAND_HDR_SIZE 3
+#define HCI_EVENT_HDR_SIZE   2
+#define HCI_ACL_HDR_SIZE     4
+#define HCI_SCO_HDR_SIZE     3
+
+struct hci_command_hdr {
+	__le16	opcode;		/* OCF & OGF */
+	__u8	plen;
+} __packed;
+
+struct hci_event_hdr {
+	__u8	evt;
+	__u8	plen;
+} __packed;
+
+struct hci_acl_hdr {
+	__le16	handle;		/* Handle & Flags(PB, BC) */
+	__le16	dlen;
+} __packed;
+
+struct hci_sco_hdr {
+	__le16	handle;
+	__u8	dlen;
+} __packed;
+
+#include <linux/skbuff.h>
+static inline struct hci_event_hdr *hci_event_hdr(const struct sk_buff *skb)
+{
+	return (struct hci_event_hdr *) skb->data;
+}
+
+static inline struct hci_acl_hdr *hci_acl_hdr(const struct sk_buff *skb)
+{
+	return (struct hci_acl_hdr *) skb->data;
+}
+
+static inline struct hci_sco_hdr *hci_sco_hdr(const struct sk_buff *skb)
+{
+	return (struct hci_sco_hdr *) skb->data;
+}
+
+/* Command opcode pack/unpack */
+#define hci_opcode_pack(ogf, ocf)	(__u16) ((ocf & 0x03ff)|(ogf << 10))
+#define hci_opcode_ogf(op)		(op >> 10)
+#define hci_opcode_ocf(op)		(op & 0x03ff)
+
+/* ACL handle and flags pack/unpack */
+#define hci_handle_pack(h, f)	(__u16) ((h & 0x0fff)|(f << 12))
+#define hci_handle(h)		(h & 0x0fff)
+#define hci_flags(h)		(h >> 12)
+
+/* ---- HCI Sockets ---- */
+
+/* Socket options */
+#define HCI_DATA_DIR	1
+#define HCI_FILTER	2
+#define HCI_TIME_STAMP	3
+
+/* CMSG flags */
+#define HCI_CMSG_DIR	0x0001
+#define HCI_CMSG_TSTAMP	0x0002
+
+struct sockaddr_hci {
+	sa_family_t    hci_family;
+	unsigned short hci_dev;
+	unsigned short hci_channel;
+};
+#define HCI_DEV_NONE	0xffff
+
+#define HCI_CHANNEL_RAW		0
+#define HCI_CHANNEL_MONITOR	2
+#define HCI_CHANNEL_CONTROL	3
+
+struct hci_filter {
+	unsigned long type_mask;
+	unsigned long event_mask[2];
+	__le16 opcode;
+};
+
+struct hci_ufilter {
+	__u32  type_mask;
+	__u32  event_mask[2];
+	__le16 opcode;
+};
+
+#define HCI_FLT_TYPE_BITS	31
+#define HCI_FLT_EVENT_BITS	63
+#define HCI_FLT_OGF_BITS	63
+#define HCI_FLT_OCF_BITS	127
+
+/* ---- HCI Ioctl requests structures ---- */
+struct hci_dev_stats {
+	__u32 err_rx;
+	__u32 err_tx;
+	__u32 cmd_tx;
+	__u32 evt_rx;
+	__u32 acl_tx;
+	__u32 acl_rx;
+	__u32 sco_tx;
+	__u32 sco_rx;
+	__u32 byte_rx;
+	__u32 byte_tx;
+};
+
+struct hci_dev_info {
+	__u16 dev_id;
+	char  name[8];
+
+	bdaddr_t bdaddr;
+
+	__u32 flags;
+	__u8  type;
+
+	__u8  features[8];
+
+	__u32 pkt_type;
+	__u32 link_policy;
+	__u32 link_mode;
+
+	__u16 acl_mtu;
+	__u16 acl_pkts;
+	__u16 sco_mtu;
+	__u16 sco_pkts;
+
+	struct hci_dev_stats stat;
+};
+
+struct hci_conn_info {
+	__u16    handle;
+	bdaddr_t bdaddr;
+	__u8     type;
+	__u8     out;
+	__u16    state;
+	__u32    link_mode;
+	__u32    mtu;
+	__u32    cnt;
+	__u32    pkts;
+};
+
+struct hci_dev_req {
+	__u16  dev_id;
+	__u32  dev_opt;
+};
+
+struct hci_dev_list_req {
+	__u16  dev_num;
+	struct hci_dev_req dev_req[0];	/* hci_dev_req structures */
+};
+
+struct hci_conn_list_req {
+	__u16  dev_id;
+	__u16  conn_num;
+	struct hci_conn_info conn_info[0];
+};
+
+struct hci_conn_info_req {
+	bdaddr_t bdaddr;
+	__u8     type;
+	struct   hci_conn_info conn_info[0];
+};
+
+struct hci_auth_info_req {
+	bdaddr_t bdaddr;
+	__u8     type;
+};
+
+struct hci_inquiry_req {
+	__u16 dev_id;
+	__u16 flags;
+	__u8  lap[3];
+	__u8  length;
+	__u8  num_rsp;
+};
+#define IREQ_CACHE_FLUSH 0x0001
+
+extern bool enable_hs;
+extern bool enable_le;
+
+#endif /* __HCI_H */
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
new file mode 100644
index 00000000..392b2cab
--- /dev/null
+++ b/include/net/bluetooth/hci_core.h
@@ -0,0 +1,1080 @@
+/*
+   BlueZ - Bluetooth protocol stack for Linux
+   Copyright (c) 2000-2001, 2010, Code Aurora Forum. All rights reserved.
+
+   Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License version 2 as
+   published by the Free Software Foundation;
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
+   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
+   SOFTWARE IS DISCLAIMED.
+*/
+
+#ifndef __HCI_CORE_H
+#define __HCI_CORE_H
+
+#include <linux/interrupt.h>
+#include <net/bluetooth/hci.h>
+
+/* HCI priority */
+#define HCI_PRIO_MAX	7
+
+/* HCI Core structures */
+struct inquiry_data {
+	bdaddr_t	bdaddr;
+	__u8		pscan_rep_mode;
+	__u8		pscan_period_mode;
+	__u8		pscan_mode;
+	__u8		dev_class[3];
+	__le16		clock_offset;
+	__s8		rssi;
+	__u8		ssp_mode;
+};
+
+struct inquiry_entry {
+	struct list_head	all;		/* inq_cache.all */
+	struct list_head	list;		/* unknown or resolve */
+	enum {
+		NAME_NOT_KNOWN,
+		NAME_NEEDED,
+		NAME_PENDING,
+		NAME_KNOWN,
+	} name_state;
+	__u32			timestamp;
+	struct inquiry_data	data;
+};
+
+struct discovery_state {
+	int			type;
+	enum {
+		DISCOVERY_STOPPED,
+		DISCOVERY_STARTING,
+		DISCOVERY_FINDING,
+		DISCOVERY_RESOLVING,
+		DISCOVERY_STOPPING,
+	} state;
+	struct list_head	all;		/* All devices found during inquiry */
+	struct list_head	unknown;	/* Name state not known */
+	struct list_head	resolve;	/* Name needs to be resolved */
+	__u32			timestamp;
+};
+
+struct hci_conn_hash {
+	struct list_head list;
+	unsigned int     acl_num;
+	unsigned int     sco_num;
+	unsigned int     le_num;
+};
+
+struct bdaddr_list {
+	struct list_head list;
+	bdaddr_t bdaddr;
+};
+
+struct bt_uuid {
+	struct list_head list;
+	u8 uuid[16];
+	u8 svc_hint;
+};
+
+struct smp_ltk {
+	struct list_head list;
+	bdaddr_t bdaddr;
+	u8 bdaddr_type;
+	u8 authenticated;
+	u8 type;
+	u8 enc_size;
+	__le16 ediv;
+	u8 rand[8];
+	u8 val[16];
+} __packed;
+
+struct link_key {
+	struct list_head list;
+	bdaddr_t bdaddr;
+	u8 type;
+	u8 val[16];
+	u8 pin_len;
+};
+
+struct oob_data {
+	struct list_head list;
+	bdaddr_t bdaddr;
+	u8 hash[16];
+	u8 randomizer[16];
+};
+
+struct adv_entry {
+	struct list_head list;
+	bdaddr_t bdaddr;
+	u8 bdaddr_type;
+};
+
+struct le_scan_params {
+	u8 type;
+	u16 interval;
+	u16 window;
+	int timeout;
+};
+
+#define HCI_MAX_SHORT_NAME_LENGTH	10
+
+#define NUM_REASSEMBLY 4
+struct hci_dev {
+	struct list_head list;
+	struct mutex	lock;
+
+	char		name[8];
+	unsigned long	flags;
+	__u16		id;
+	__u8		bus;
+	__u8		dev_type;
+	bdaddr_t	bdaddr;
+	__u8		dev_name[HCI_MAX_NAME_LENGTH];
+	__u8		short_name[HCI_MAX_SHORT_NAME_LENGTH];
+	__u8		eir[HCI_MAX_EIR_LENGTH];
+	__u8		dev_class[3];
+	__u8		major_class;
+	__u8		minor_class;
+	__u8		features[8];
+	__u8		host_features[8];
+	__u8		commands[64];
+	__u8		hci_ver;
+	__u16		hci_rev;
+	__u8		lmp_ver;
+	__u16		manufacturer;
+	__le16		lmp_subver;
+	__u16		voice_setting;
+	__u8		io_capability;
+
+	__u16		pkt_type;
+	__u16		esco_type;
+	__u16		link_policy;
+	__u16		link_mode;
+
+	__u32		idle_timeout;
+	__u16		sniff_min_interval;
+	__u16		sniff_max_interval;
+
+	__u8		amp_status;
+	__u32		amp_total_bw;
+	__u32		amp_max_bw;
+	__u32		amp_min_latency;
+	__u32		amp_max_pdu;
+	__u8		amp_type;
+	__u16		amp_pal_cap;
+	__u16		amp_assoc_size;
+	__u32		amp_max_flush_to;
+	__u32		amp_be_flush_to;
+
+	__u8		flow_ctl_mode;
+
+	unsigned int	auto_accept_delay;
+
+	unsigned long	quirks;
+
+	atomic_t	cmd_cnt;
+	unsigned int	acl_cnt;
+	unsigned int	sco_cnt;
+	unsigned int	le_cnt;
+
+	unsigned int	acl_mtu;
+	unsigned int	sco_mtu;
+	unsigned int	le_mtu;
+	unsigned int	acl_pkts;
+	unsigned int	sco_pkts;
+	unsigned int	le_pkts;
+
+	__u16		block_len;
+	__u16		block_mtu;
+	__u16		num_blocks;
+	__u16		block_cnt;
+
+	unsigned long	acl_last_tx;
+	unsigned long	sco_last_tx;
+	unsigned long	le_last_tx;
+
+	struct workqueue_struct	*workqueue;
+
+	struct work_struct	power_on;
+	struct delayed_work	power_off;
+
+	__u16			discov_timeout;
+	struct delayed_work	discov_off;
+
+	struct delayed_work	service_cache;
+
+	struct timer_list	cmd_timer;
+
+	struct work_struct	rx_work;
+	struct work_struct	cmd_work;
+	struct work_struct	tx_work;
+
+	struct sk_buff_head	rx_q;
+	struct sk_buff_head	raw_q;
+	struct sk_buff_head	cmd_q;
+
+	struct sk_buff		*sent_cmd;
+	struct sk_buff		*reassembly[NUM_REASSEMBLY];
+
+	struct mutex		req_lock;
+	wait_queue_head_t	req_wait_q;
+	__u32			req_status;
+	__u32			req_result;
+
+	__u16			init_last_cmd;
+
+	struct list_head	mgmt_pending;
+
+	struct discovery_state	discovery;
+	struct hci_conn_hash	conn_hash;
+	struct list_head	blacklist;
+
+	struct list_head	uuids;
+
+	struct list_head	link_keys;
+
+	struct list_head	long_term_keys;
+
+	struct list_head	remote_oob_data;
+
+	struct list_head	adv_entries;
+	struct delayed_work	adv_work;
+
+	struct hci_dev_stats	stat;
+
+	struct sk_buff_head	driver_init;
+
+	void			*core_data;
+
+	atomic_t		promisc;
+
+	struct dentry		*debugfs;
+
+	struct device		*parent;
+	struct device		dev;
+
+	struct rfkill		*rfkill;
+
+	unsigned long		dev_flags;
+
+	struct delayed_work	le_scan_disable;
+
+	struct work_struct	le_scan;
+	struct le_scan_params	le_scan_params;
+
+	int (*open)(struct hci_dev *hdev);
+	int (*close)(struct hci_dev *hdev);
+	int (*flush)(struct hci_dev *hdev);
+	int (*send)(struct sk_buff *skb);
+	void (*notify)(struct hci_dev *hdev, unsigned int evt);
+	int (*ioctl)(struct hci_dev *hdev, unsigned int cmd, unsigned long arg);
+};
+
+struct hci_conn {
+	struct list_head list;
+
+	atomic_t	refcnt;
+
+	bdaddr_t	dst;
+	__u8		dst_type;
+	__u16		handle;
+	__u16		state;
+	__u8		mode;
+	__u8		type;
+	bool		out;
+	__u8		attempt;
+	__u8		dev_class[3];
+	__u8		features[8];
+	__u16		interval;
+	__u16		pkt_type;
+	__u16		link_policy;
+	__u32		link_mode;
+	__u8		key_type;
+	__u8		auth_type;
+	__u8		sec_level;
+	__u8		pending_sec_level;
+	__u8		pin_length;
+	__u8		enc_key_size;
+	__u8		io_capability;
+	__u16		disc_timeout;
+	unsigned long	flags;
+
+	__u8		remote_cap;
+	__u8		remote_auth;
+	bool		flush_key;
+
+	unsigned int	sent;
+
+	struct sk_buff_head data_q;
+	struct list_head chan_list;
+
+	struct delayed_work disc_work;
+	struct timer_list idle_timer;
+	struct timer_list auto_accept_timer;
+
+	struct device	dev;
+	atomic_t	devref;
+
+	struct hci_dev	*hdev;
+	void		*l2cap_data;
+	void		*sco_data;
+	void		*smp_conn;
+
+	struct hci_conn	*link;
+
+	void (*connect_cfm_cb)	(struct hci_conn *conn, u8 status);
+	void (*security_cfm_cb)	(struct hci_conn *conn, u8 status);
+	void (*disconn_cfm_cb)	(struct hci_conn *conn, u8 reason);
+};
+
+struct hci_chan {
+	struct list_head list;
+
+	struct hci_conn *conn;
+	struct sk_buff_head data_q;
+	unsigned int	sent;
+};
+
+extern struct list_head hci_dev_list;
+extern struct list_head hci_cb_list;
+extern rwlock_t hci_dev_list_lock;
+extern rwlock_t hci_cb_list_lock;
+
+/* ----- HCI interface to upper protocols ----- */
+extern int l2cap_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr);
+extern int l2cap_connect_cfm(struct hci_conn *hcon, u8 status);
+extern int l2cap_disconn_ind(struct hci_conn *hcon);
+extern int l2cap_disconn_cfm(struct hci_conn *hcon, u8 reason);
+extern int l2cap_security_cfm(struct hci_conn *hcon, u8 status, u8 encrypt);
+extern int l2cap_recv_acldata(struct hci_conn *hcon, struct sk_buff *skb, u16 flags);
+
+extern int sco_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr);
+extern int sco_connect_cfm(struct hci_conn *hcon, __u8 status);
+extern int sco_disconn_cfm(struct hci_conn *hcon, __u8 reason);
+extern int sco_recv_scodata(struct hci_conn *hcon, struct sk_buff *skb);
+
+/* ----- Inquiry cache ----- */
+#define INQUIRY_CACHE_AGE_MAX   (HZ*30)   /* 30 seconds */
+#define INQUIRY_ENTRY_AGE_MAX   (HZ*60)   /* 60 seconds */
+
+static inline void discovery_init(struct hci_dev *hdev)
+{
+	hdev->discovery.state = DISCOVERY_STOPPED;
+	INIT_LIST_HEAD(&hdev->discovery.all);
+	INIT_LIST_HEAD(&hdev->discovery.unknown);
+	INIT_LIST_HEAD(&hdev->discovery.resolve);
+}
+
+bool hci_discovery_active(struct hci_dev *hdev);
+
+void hci_discovery_set_state(struct hci_dev *hdev, int state);
+
+static inline int inquiry_cache_empty(struct hci_dev *hdev)
+{
+	return list_empty(&hdev->discovery.all);
+}
+
+static inline long inquiry_cache_age(struct hci_dev *hdev)
+{
+	struct discovery_state *c = &hdev->discovery;
+	return jiffies - c->timestamp;
+}
+
+static inline long inquiry_entry_age(struct inquiry_entry *e)
+{
+	return jiffies - e->timestamp;
+}
+
+struct inquiry_entry *hci_inquiry_cache_lookup(struct hci_dev *hdev,
+					       bdaddr_t *bdaddr);
+struct inquiry_entry *hci_inquiry_cache_lookup_unknown(struct hci_dev *hdev,
+						       bdaddr_t *bdaddr);
+struct inquiry_entry *hci_inquiry_cache_lookup_resolve(struct hci_dev *hdev,
+						       bdaddr_t *bdaddr,
+						       int state);
+void hci_inquiry_cache_update_resolve(struct hci_dev *hdev,
+				      struct inquiry_entry *ie);
+bool hci_inquiry_cache_update(struct hci_dev *hdev, struct inquiry_data *data,
+			      bool name_known, bool *ssp);
+
+/* ----- HCI Connections ----- */
+enum {
+	HCI_CONN_AUTH_PEND,
+	HCI_CONN_REAUTH_PEND,
+	HCI_CONN_ENCRYPT_PEND,
+	HCI_CONN_RSWITCH_PEND,
+	HCI_CONN_MODE_CHANGE_PEND,
+	HCI_CONN_SCO_SETUP_PEND,
+	HCI_CONN_LE_SMP_PEND,
+	HCI_CONN_MGMT_CONNECTED,
+	HCI_CONN_SSP_ENABLED,
+	HCI_CONN_POWER_SAVE,
+	HCI_CONN_REMOTE_OOB,
+};
+
+static inline bool hci_conn_ssp_enabled(struct hci_conn *conn)
+{
+	struct hci_dev *hdev = conn->hdev;
+	return (test_bit(HCI_SSP_ENABLED, &hdev->dev_flags) &&
+				test_bit(HCI_CONN_SSP_ENABLED, &conn->flags));
+}
+
+static inline void hci_conn_hash_init(struct hci_dev *hdev)
+{
+	struct hci_conn_hash *h = &hdev->conn_hash;
+	INIT_LIST_HEAD(&h->list);
+	h->acl_num = 0;
+	h->sco_num = 0;
+	h->le_num = 0;
+}
+
+static inline void hci_conn_hash_add(struct hci_dev *hdev, struct hci_conn *c)
+{
+	struct hci_conn_hash *h = &hdev->conn_hash;
+	list_add_rcu(&c->list, &h->list);
+	switch (c->type) {
+	case ACL_LINK:
+		h->acl_num++;
+		break;
+	case LE_LINK:
+		h->le_num++;
+		break;
+	case SCO_LINK:
+	case ESCO_LINK:
+		h->sco_num++;
+		break;
+	}
+}
+
+static inline void hci_conn_hash_del(struct hci_dev *hdev, struct hci_conn *c)
+{
+	struct hci_conn_hash *h = &hdev->conn_hash;
+
+	list_del_rcu(&c->list);
+	synchronize_rcu();
+
+	switch (c->type) {
+	case ACL_LINK:
+		h->acl_num--;
+		break;
+	case LE_LINK:
+		h->le_num--;
+		break;
+	case SCO_LINK:
+	case ESCO_LINK:
+		h->sco_num--;
+		break;
+	}
+}
+
+static inline unsigned int hci_conn_num(struct hci_dev *hdev, __u8 type)
+{
+	struct hci_conn_hash *h = &hdev->conn_hash;
+	switch (type) {
+	case ACL_LINK:
+		return h->acl_num;
+	case LE_LINK:
+		return h->le_num;
+	case SCO_LINK:
+	case ESCO_LINK:
+		return h->sco_num;
+	default:
+		return 0;
+	}
+}
+
+static inline struct hci_conn *hci_conn_hash_lookup_handle(struct hci_dev *hdev,
+								__u16 handle)
+{
+	struct hci_conn_hash *h = &hdev->conn_hash;
+	struct hci_conn  *c;
+
+	rcu_read_lock();
+
+	list_for_each_entry_rcu(c, &h->list, list) {
+		if (c->handle == handle) {
+			rcu_read_unlock();
+			return c;
+		}
+	}
+	rcu_read_unlock();
+
+	return NULL;
+}
+
+static inline struct hci_conn *hci_conn_hash_lookup_ba(struct hci_dev *hdev,
+							__u8 type, bdaddr_t *ba)
+{
+	struct hci_conn_hash *h = &hdev->conn_hash;
+	struct hci_conn  *c;
+
+	rcu_read_lock();
+
+	list_for_each_entry_rcu(c, &h->list, list) {
+		if (c->type == type && !bacmp(&c->dst, ba)) {
+			rcu_read_unlock();
+			return c;
+		}
+	}
+
+	rcu_read_unlock();
+
+	return NULL;
+}
+
+static inline struct hci_conn *hci_conn_hash_lookup_state(struct hci_dev *hdev,
+							__u8 type, __u16 state)
+{
+	struct hci_conn_hash *h = &hdev->conn_hash;
+	struct hci_conn  *c;
+
+	rcu_read_lock();
+
+	list_for_each_entry_rcu(c, &h->list, list) {
+		if (c->type == type && c->state == state) {
+			rcu_read_unlock();
+			return c;
+		}
+	}
+
+	rcu_read_unlock();
+
+	return NULL;
+}
+
+void hci_acl_connect(struct hci_conn *conn);
+void hci_acl_disconn(struct hci_conn *conn, __u8 reason);
+void hci_add_sco(struct hci_conn *conn, __u16 handle);
+void hci_setup_sync(struct hci_conn *conn, __u16 handle);
+void hci_sco_setup(struct hci_conn *conn, __u8 status);
+
+struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type,
+					__u16 pkt_type, bdaddr_t *dst);
+int hci_conn_del(struct hci_conn *conn);
+void hci_conn_hash_flush(struct hci_dev *hdev);
+void hci_conn_check_pending(struct hci_dev *hdev);
+
+struct hci_chan *hci_chan_create(struct hci_conn *conn);
+int hci_chan_del(struct hci_chan *chan);
+void hci_chan_list_flush(struct hci_conn *conn);
+
+struct hci_conn *hci_connect(struct hci_dev *hdev, int type,
+					__u16 pkt_type, bdaddr_t *dst,
+					__u8 sec_level, __u8 auth_type);
+int hci_conn_check_link_mode(struct hci_conn *conn);
+int hci_conn_check_secure(struct hci_conn *conn, __u8 sec_level);
+int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type);
+int hci_conn_change_link_key(struct hci_conn *conn);
+int hci_conn_switch_role(struct hci_conn *conn, __u8 role);
+
+void hci_conn_enter_active_mode(struct hci_conn *conn, __u8 force_active);
+
+void hci_conn_hold_device(struct hci_conn *conn);
+void hci_conn_put_device(struct hci_conn *conn);
+
+static inline void hci_conn_hold(struct hci_conn *conn)
+{
+	atomic_inc(&conn->refcnt);
+	cancel_delayed_work(&conn->disc_work);
+}
+
+static inline void hci_conn_put(struct hci_conn *conn)
+{
+	if (atomic_dec_and_test(&conn->refcnt)) {
+		unsigned long timeo;
+		if (conn->type == ACL_LINK || conn->type == LE_LINK) {
+			del_timer(&conn->idle_timer);
+			if (conn->state == BT_CONNECTED) {
+				timeo = msecs_to_jiffies(conn->disc_timeout);
+				if (!conn->out)
+					timeo *= 20;
+			} else {
+				timeo = msecs_to_jiffies(10);
+			}
+		} else {
+			timeo = msecs_to_jiffies(10);
+		}
+		cancel_delayed_work(&conn->disc_work);
+		queue_delayed_work(conn->hdev->workqueue,
+					&conn->disc_work, timeo);
+	}
+}
+
+/* ----- HCI Devices ----- */
+static inline void hci_dev_put(struct hci_dev *d)
+{
+	put_device(&d->dev);
+}
+
+static inline struct hci_dev *hci_dev_hold(struct hci_dev *d)
+{
+	get_device(&d->dev);
+	return d;
+}
+
+#define hci_dev_lock(d)		mutex_lock(&d->lock)
+#define hci_dev_unlock(d)	mutex_unlock(&d->lock)
+
+#define to_hci_dev(d) container_of(d, struct hci_dev, dev)
+#define to_hci_conn(c) container_of(c, struct hci_conn, dev)
+
+static inline void *hci_get_drvdata(struct hci_dev *hdev)
+{
+	return dev_get_drvdata(&hdev->dev);
+}
+
+static inline void hci_set_drvdata(struct hci_dev *hdev, void *data)
+{
+	dev_set_drvdata(&hdev->dev, data);
+}
+
+struct hci_dev *hci_dev_get(int index);
+struct hci_dev *hci_get_route(bdaddr_t *src, bdaddr_t *dst);
+
+struct hci_dev *hci_alloc_dev(void);
+void hci_free_dev(struct hci_dev *hdev);
+int hci_register_dev(struct hci_dev *hdev);
+void hci_unregister_dev(struct hci_dev *hdev);
+int hci_suspend_dev(struct hci_dev *hdev);
+int hci_resume_dev(struct hci_dev *hdev);
+int hci_dev_open(__u16 dev);
+int hci_dev_close(__u16 dev);
+int hci_dev_reset(__u16 dev);
+int hci_dev_reset_stat(__u16 dev);
+int hci_dev_cmd(unsigned int cmd, void __user *arg);
+int hci_get_dev_list(void __user *arg);
+int hci_get_dev_info(void __user *arg);
+int hci_get_conn_list(void __user *arg);
+int hci_get_conn_info(struct hci_dev *hdev, void __user *arg);
+int hci_get_auth_info(struct hci_dev *hdev, void __user *arg);
+int hci_inquiry(void __user *arg);
+
+struct bdaddr_list *hci_blacklist_lookup(struct hci_dev *hdev, bdaddr_t *bdaddr);
+int hci_blacklist_clear(struct hci_dev *hdev);
+int hci_blacklist_add(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 type);
+int hci_blacklist_del(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 type);
+
+int hci_uuids_clear(struct hci_dev *hdev);
+
+int hci_link_keys_clear(struct hci_dev *hdev);
+struct link_key *hci_find_link_key(struct hci_dev *hdev, bdaddr_t *bdaddr);
+int hci_add_link_key(struct hci_dev *hdev, struct hci_conn *conn, int new_key,
+		     bdaddr_t *bdaddr, u8 *val, u8 type, u8 pin_len);
+struct smp_ltk *hci_find_ltk(struct hci_dev *hdev, __le16 ediv, u8 rand[8]);
+int hci_add_ltk(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 addr_type, u8 type,
+		int new_key, u8 authenticated, u8 tk[16], u8 enc_size, u16 ediv,
+		u8 rand[8]);
+struct smp_ltk *hci_find_ltk_by_addr(struct hci_dev *hdev, bdaddr_t *bdaddr,
+				     u8 addr_type);
+int hci_remove_ltk(struct hci_dev *hdev, bdaddr_t *bdaddr);
+int hci_smp_ltks_clear(struct hci_dev *hdev);
+int hci_remove_link_key(struct hci_dev *hdev, bdaddr_t *bdaddr);
+
+int hci_remote_oob_data_clear(struct hci_dev *hdev);
+struct oob_data *hci_find_remote_oob_data(struct hci_dev *hdev,
+							bdaddr_t *bdaddr);
+int hci_add_remote_oob_data(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 *hash,
+								u8 *randomizer);
+int hci_remove_remote_oob_data(struct hci_dev *hdev, bdaddr_t *bdaddr);
+
+#define ADV_CLEAR_TIMEOUT (3*60*HZ) /* Three minutes */
+int hci_adv_entries_clear(struct hci_dev *hdev);
+struct adv_entry *hci_find_adv_entry(struct hci_dev *hdev, bdaddr_t *bdaddr);
+int hci_add_adv_entry(struct hci_dev *hdev,
+					struct hci_ev_le_advertising_info *ev);
+
+void hci_del_off_timer(struct hci_dev *hdev);
+
+void hci_event_packet(struct hci_dev *hdev, struct sk_buff *skb);
+
+int hci_recv_frame(struct sk_buff *skb);
+int hci_recv_fragment(struct hci_dev *hdev, int type, void *data, int count);
+int hci_recv_stream_fragment(struct hci_dev *hdev, void *data, int count);
+
+void hci_init_sysfs(struct hci_dev *hdev);
+int hci_add_sysfs(struct hci_dev *hdev);
+void hci_del_sysfs(struct hci_dev *hdev);
+void hci_conn_init_sysfs(struct hci_conn *conn);
+void hci_conn_add_sysfs(struct hci_conn *conn);
+void hci_conn_del_sysfs(struct hci_conn *conn);
+
+#define SET_HCIDEV_DEV(hdev, pdev) ((hdev)->parent = (pdev))
+
+/* ----- LMP capabilities ----- */
+#define lmp_rswitch_capable(dev)   ((dev)->features[0] & LMP_RSWITCH)
+#define lmp_encrypt_capable(dev)   ((dev)->features[0] & LMP_ENCRYPT)
+#define lmp_sniff_capable(dev)     ((dev)->features[0] & LMP_SNIFF)
+#define lmp_sniffsubr_capable(dev) ((dev)->features[5] & LMP_SNIFF_SUBR)
+#define lmp_esco_capable(dev)      ((dev)->features[3] & LMP_ESCO)
+#define lmp_ssp_capable(dev)       ((dev)->features[6] & LMP_SIMPLE_PAIR)
+#define lmp_no_flush_capable(dev)  ((dev)->features[6] & LMP_NO_FLUSH)
+#define lmp_le_capable(dev)        ((dev)->features[4] & LMP_LE)
+#define lmp_bredr_capable(dev)     (!((dev)->features[4] & LMP_NO_BREDR))
+
+/* ----- Extended LMP capabilities ----- */
+#define lmp_host_le_capable(dev)   ((dev)->host_features[0] & LMP_HOST_LE)
+
+/* ----- HCI protocols ----- */
+static inline int hci_proto_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr,
+								__u8 type)
+{
+	switch (type) {
+	case ACL_LINK:
+		return l2cap_connect_ind(hdev, bdaddr);
+
+	case SCO_LINK:
+	case ESCO_LINK:
+		return sco_connect_ind(hdev, bdaddr);
+
+	default:
+		BT_ERR("unknown link type %d", type);
+		return -EINVAL;
+	}
+}
+
+static inline void hci_proto_connect_cfm(struct hci_conn *conn, __u8 status)
+{
+	switch (conn->type) {
+	case ACL_LINK:
+	case LE_LINK:
+		l2cap_connect_cfm(conn, status);
+		break;
+
+	case SCO_LINK:
+	case ESCO_LINK:
+		sco_connect_cfm(conn, status);
+		break;
+
+	default:
+		BT_ERR("unknown link type %d", conn->type);
+		break;
+	}
+
+	if (conn->connect_cfm_cb)
+		conn->connect_cfm_cb(conn, status);
+}
+
+static inline int hci_proto_disconn_ind(struct hci_conn *conn)
+{
+	if (conn->type != ACL_LINK && conn->type != LE_LINK)
+		return HCI_ERROR_REMOTE_USER_TERM;
+
+	return l2cap_disconn_ind(conn);
+}
+
+static inline void hci_proto_disconn_cfm(struct hci_conn *conn, __u8 reason)
+{
+	switch (conn->type) {
+	case ACL_LINK:
+	case LE_LINK:
+		l2cap_disconn_cfm(conn, reason);
+		break;
+
+	case SCO_LINK:
+	case ESCO_LINK:
+		sco_disconn_cfm(conn, reason);
+		break;
+
+	default:
+		BT_ERR("unknown link type %d", conn->type);
+		break;
+	}
+
+	if (conn->disconn_cfm_cb)
+		conn->disconn_cfm_cb(conn, reason);
+}
+
+static inline void hci_proto_auth_cfm(struct hci_conn *conn, __u8 status)
+{
+	__u8 encrypt;
+
+	if (conn->type != ACL_LINK && conn->type != LE_LINK)
+		return;
+
+	if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags))
+		return;
+
+	encrypt = (conn->link_mode & HCI_LM_ENCRYPT) ? 0x01 : 0x00;
+	l2cap_security_cfm(conn, status, encrypt);
+
+	if (conn->security_cfm_cb)
+		conn->security_cfm_cb(conn, status);
+}
+
+static inline void hci_proto_encrypt_cfm(struct hci_conn *conn, __u8 status,
+								__u8 encrypt)
+{
+	if (conn->type != ACL_LINK && conn->type != LE_LINK)
+		return;
+
+	l2cap_security_cfm(conn, status, encrypt);
+
+	if (conn->security_cfm_cb)
+		conn->security_cfm_cb(conn, status);
+}
+
+/* ----- HCI callbacks ----- */
+struct hci_cb {
+	struct list_head list;
+
+	char *name;
+
+	void (*security_cfm)	(struct hci_conn *conn, __u8 status,
+								__u8 encrypt);
+	void (*key_change_cfm)	(struct hci_conn *conn, __u8 status);
+	void (*role_switch_cfm)	(struct hci_conn *conn, __u8 status, __u8 role);
+};
+
+static inline void hci_auth_cfm(struct hci_conn *conn, __u8 status)
+{
+	struct list_head *p;
+	__u8 encrypt;
+
+	hci_proto_auth_cfm(conn, status);
+
+	if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags))
+		return;
+
+	encrypt = (conn->link_mode & HCI_LM_ENCRYPT) ? 0x01 : 0x00;
+
+	read_lock(&hci_cb_list_lock);
+	list_for_each(p, &hci_cb_list) {
+		struct hci_cb *cb = list_entry(p, struct hci_cb, list);
+		if (cb->security_cfm)
+			cb->security_cfm(conn, status, encrypt);
+	}
+	read_unlock(&hci_cb_list_lock);
+}
+
+static inline void hci_encrypt_cfm(struct hci_conn *conn, __u8 status,
+								__u8 encrypt)
+{
+	struct list_head *p;
+
+	if (conn->sec_level == BT_SECURITY_SDP)
+		conn->sec_level = BT_SECURITY_LOW;
+
+	if (conn->pending_sec_level > conn->sec_level)
+		conn->sec_level = conn->pending_sec_level;
+
+	hci_proto_encrypt_cfm(conn, status, encrypt);
+
+	read_lock(&hci_cb_list_lock);
+	list_for_each(p, &hci_cb_list) {
+		struct hci_cb *cb = list_entry(p, struct hci_cb, list);
+		if (cb->security_cfm)
+			cb->security_cfm(conn, status, encrypt);
+	}
+	read_unlock(&hci_cb_list_lock);
+}
+
+static inline void hci_key_change_cfm(struct hci_conn *conn, __u8 status)
+{
+	struct list_head *p;
+
+	read_lock(&hci_cb_list_lock);
+	list_for_each(p, &hci_cb_list) {
+		struct hci_cb *cb = list_entry(p, struct hci_cb, list);
+		if (cb->key_change_cfm)
+			cb->key_change_cfm(conn, status);
+	}
+	read_unlock(&hci_cb_list_lock);
+}
+
+static inline void hci_role_switch_cfm(struct hci_conn *conn, __u8 status,
+								__u8 role)
+{
+	struct list_head *p;
+
+	read_lock(&hci_cb_list_lock);
+	list_for_each(p, &hci_cb_list) {
+		struct hci_cb *cb = list_entry(p, struct hci_cb, list);
+		if (cb->role_switch_cfm)
+			cb->role_switch_cfm(conn, status, role);
+	}
+	read_unlock(&hci_cb_list_lock);
+}
+
+static inline bool eir_has_data_type(u8 *data, size_t data_len, u8 type)
+{
+	size_t parsed = 0;
+
+	if (data_len < 2)
+		return false;
+
+	while (parsed < data_len - 1) {
+		u8 field_len = data[0];
+
+		if (field_len == 0)
+			break;
+
+		parsed += field_len + 1;
+
+		if (parsed > data_len)
+			break;
+
+		if (data[1] == type)
+			return true;
+
+		data += field_len + 1;
+	}
+
+	return false;
+}
+
+static inline u16 eir_append_data(u8 *eir, u16 eir_len, u8 type, u8 *data,
+				  u8 data_len)
+{
+	eir[eir_len++] = sizeof(type) + data_len;
+	eir[eir_len++] = type;
+	memcpy(&eir[eir_len], data, data_len);
+	eir_len += data_len;
+
+	return eir_len;
+}
+
+int hci_register_cb(struct hci_cb *hcb);
+int hci_unregister_cb(struct hci_cb *hcb);
+
+int hci_send_cmd(struct hci_dev *hdev, __u16 opcode, __u32 plen, void *param);
+void hci_send_acl(struct hci_chan *chan, struct sk_buff *skb, __u16 flags);
+void hci_send_sco(struct hci_conn *conn, struct sk_buff *skb);
+
+void *hci_sent_cmd_data(struct hci_dev *hdev, __u16 opcode);
+
+/* ----- HCI Sockets ----- */
+void hci_send_to_sock(struct hci_dev *hdev, struct sk_buff *skb);
+void hci_send_to_control(struct sk_buff *skb, struct sock *skip_sk);
+void hci_send_to_monitor(struct hci_dev *hdev, struct sk_buff *skb);
+
+void hci_sock_dev_event(struct hci_dev *hdev, int event);
+
+/* Management interface */
+#define MGMT_ADDR_BREDR			0x00
+#define MGMT_ADDR_LE_PUBLIC		0x01
+#define MGMT_ADDR_LE_RANDOM		0x02
+#define MGMT_ADDR_INVALID		0xff
+
+#define DISCOV_TYPE_BREDR		(BIT(MGMT_ADDR_BREDR))
+#define DISCOV_TYPE_LE			(BIT(MGMT_ADDR_LE_PUBLIC) | \
+						BIT(MGMT_ADDR_LE_RANDOM))
+#define DISCOV_TYPE_INTERLEAVED		(BIT(MGMT_ADDR_BREDR) | \
+						BIT(MGMT_ADDR_LE_PUBLIC) | \
+						BIT(MGMT_ADDR_LE_RANDOM))
+
+int mgmt_control(struct sock *sk, struct msghdr *msg, size_t len);
+int mgmt_index_added(struct hci_dev *hdev);
+int mgmt_index_removed(struct hci_dev *hdev);
+int mgmt_powered(struct hci_dev *hdev, u8 powered);
+int mgmt_discoverable(struct hci_dev *hdev, u8 discoverable);
+int mgmt_connectable(struct hci_dev *hdev, u8 connectable);
+int mgmt_write_scan_failed(struct hci_dev *hdev, u8 scan, u8 status);
+int mgmt_new_link_key(struct hci_dev *hdev, struct link_key *key,
+		      bool persistent);
+int mgmt_device_connected(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 link_type,
+			  u8 addr_type, u32 flags, u8 *name, u8 name_len,
+			  u8 *dev_class);
+int mgmt_device_disconnected(struct hci_dev *hdev, bdaddr_t *bdaddr,
+			     u8 link_type, u8 addr_type);
+int mgmt_disconnect_failed(struct hci_dev *hdev, bdaddr_t *bdaddr,
+			   u8 link_type, u8 addr_type, u8 status);
+int mgmt_connect_failed(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 link_type,
+			u8 addr_type, u8 status);
+int mgmt_pin_code_request(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 secure);
+int mgmt_pin_code_reply_complete(struct hci_dev *hdev, bdaddr_t *bdaddr,
+				 u8 status);
+int mgmt_pin_code_neg_reply_complete(struct hci_dev *hdev, bdaddr_t *bdaddr,
+				     u8 status);
+int mgmt_user_confirm_request(struct hci_dev *hdev, bdaddr_t *bdaddr,
+			      u8 link_type, u8 addr_type, __le32 value,
+			      u8 confirm_hint);
+int mgmt_user_confirm_reply_complete(struct hci_dev *hdev, bdaddr_t *bdaddr,
+				     u8 link_type, u8 addr_type, u8 status);
+int mgmt_user_confirm_neg_reply_complete(struct hci_dev *hdev, bdaddr_t *bdaddr,
+					 u8 link_type, u8 addr_type, u8 status);
+int mgmt_user_passkey_request(struct hci_dev *hdev, bdaddr_t *bdaddr,
+			      u8 link_type, u8 addr_type);
+int mgmt_user_passkey_reply_complete(struct hci_dev *hdev, bdaddr_t *bdaddr,
+				     u8 link_type, u8 addr_type, u8 status);
+int mgmt_user_passkey_neg_reply_complete(struct hci_dev *hdev, bdaddr_t *bdaddr,
+					 u8 link_type, u8 addr_type, u8 status);
+int mgmt_auth_failed(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 link_type,
+		     u8 addr_type, u8 status);
+int mgmt_auth_enable_complete(struct hci_dev *hdev, u8 status);
+int mgmt_ssp_enable_complete(struct hci_dev *hdev, u8 enable, u8 status);
+int mgmt_set_class_of_dev_complete(struct hci_dev *hdev, u8 *dev_class,
+				   u8 status);
+int mgmt_set_local_name_complete(struct hci_dev *hdev, u8 *name, u8 status);
+int mgmt_read_local_oob_data_reply_complete(struct hci_dev *hdev, u8 *hash,
+					    u8 *randomizer, u8 status);
+int mgmt_le_enable_complete(struct hci_dev *hdev, u8 enable, u8 status);
+int mgmt_device_found(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 link_type,
+		      u8 addr_type, u8 *dev_class, s8 rssi, u8 cfm_name,
+		      u8 ssp, u8 *eir, u16 eir_len);
+int mgmt_remote_name(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 link_type,
+		     u8 addr_type, s8 rssi, u8 *name, u8 name_len);
+int mgmt_start_discovery_failed(struct hci_dev *hdev, u8 status);
+int mgmt_stop_discovery_failed(struct hci_dev *hdev, u8 status);
+int mgmt_discovering(struct hci_dev *hdev, u8 discovering);
+int mgmt_interleaved_discovery(struct hci_dev *hdev);
+int mgmt_device_blocked(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 type);
+int mgmt_device_unblocked(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 type);
+
+int mgmt_new_ltk(struct hci_dev *hdev, struct smp_ltk *key, u8 persistent);
+
+/* HCI info for socket */
+#define hci_pi(sk) ((struct hci_pinfo *) sk)
+
+struct hci_pinfo {
+	struct bt_sock    bt;
+	struct hci_dev    *hdev;
+	struct hci_filter filter;
+	__u32             cmsg_mask;
+	unsigned short   channel;
+};
+
+/* HCI security filter */
+#define HCI_SFLT_MAX_OGF  5
+
+struct hci_sec_filter {
+	__u32 type_mask;
+	__u32 event_mask[2];
+	__u32 ocf_mask[HCI_SFLT_MAX_OGF + 1][4];
+};
+
+/* ----- HCI requests ----- */
+#define HCI_REQ_DONE	  0
+#define HCI_REQ_PEND	  1
+#define HCI_REQ_CANCELED  2
+
+#define hci_req_lock(d)		mutex_lock(&d->req_lock)
+#define hci_req_unlock(d)	mutex_unlock(&d->req_lock)
+
+void hci_req_complete(struct hci_dev *hdev, __u16 cmd, int result);
+
+void hci_le_conn_update(struct hci_conn *conn, u16 min, u16 max,
+					u16 latency, u16 to_multiplier);
+void hci_le_start_enc(struct hci_conn *conn, __le16 ediv, __u8 rand[8],
+							__u8 ltk[16]);
+void hci_le_ltk_reply(struct hci_conn *conn, u8 ltk[16]);
+void hci_le_ltk_neg_reply(struct hci_conn *conn);
+
+int hci_do_inquiry(struct hci_dev *hdev, u8 length);
+int hci_cancel_inquiry(struct hci_dev *hdev);
+int hci_le_scan(struct hci_dev *hdev, u8 type, u16 interval, u16 window,
+		int timeout);
+
+#endif /* __HCI_CORE_H */
diff --git a/include/net/bluetooth/hci_mon.h b/include/net/bluetooth/hci_mon.h
new file mode 100644
index 00000000..77d1e576
--- /dev/null
+++ b/include/net/bluetooth/hci_mon.h
@@ -0,0 +1,51 @@
+/*
+   BlueZ - Bluetooth protocol stack for Linux
+
+   Copyright (C) 2011-2012  Intel Corporation
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License version 2 as
+   published by the Free Software Foundation;
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
+   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
+   SOFTWARE IS DISCLAIMED.
+*/
+
+#ifndef __HCI_MON_H
+#define __HCI_MON_H
+
+struct hci_mon_hdr {
+	__le16	opcode;
+	__le16	index;
+	__le16	len;
+} __packed;
+#define HCI_MON_HDR_SIZE 6
+
+#define HCI_MON_NEW_INDEX	0
+#define HCI_MON_DEL_INDEX	1
+#define HCI_MON_COMMAND_PKT	2
+#define HCI_MON_EVENT_PKT	3
+#define HCI_MON_ACL_TX_PKT	4
+#define HCI_MON_ACL_RX_PKT	5
+#define HCI_MON_SCO_TX_PKT	6
+#define HCI_MON_SCO_RX_PKT	7
+
+struct hci_mon_new_index {
+	__u8		type;
+	__u8		bus;
+	bdaddr_t	bdaddr;
+	char		name[8];
+} __packed;
+#define HCI_MON_NEW_INDEX_SIZE 16
+
+#endif /* __HCI_MON_H */
diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
new file mode 100644
index 00000000..9b242c6b
--- /dev/null
+++ b/include/net/bluetooth/l2cap.h
@@ -0,0 +1,865 @@
+/*
+   BlueZ - Bluetooth protocol stack for Linux
+   Copyright (C) 2000-2001 Qualcomm Incorporated
+   Copyright (C) 2009-2010 Gustavo F. Padovan <gustavo@padovan.org>
+   Copyright (C) 2010 Google Inc.
+
+   Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License version 2 as
+   published by the Free Software Foundation;
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
+   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
+   SOFTWARE IS DISCLAIMED.
+*/
+
+#ifndef __L2CAP_H
+#define __L2CAP_H
+
+#include <asm/unaligned.h>
+
+/* L2CAP defaults */
+#define L2CAP_DEFAULT_MTU		672
+#define L2CAP_DEFAULT_MIN_MTU		48
+#define L2CAP_DEFAULT_FLUSH_TO		0xffff
+#define L2CAP_DEFAULT_TX_WINDOW		63
+#define L2CAP_DEFAULT_EXT_WINDOW	0x3FFF
+#define L2CAP_DEFAULT_MAX_TX		3
+#define L2CAP_DEFAULT_RETRANS_TO	2000    /* 2 seconds */
+#define L2CAP_DEFAULT_MONITOR_TO	12000   /* 12 seconds */
+#define L2CAP_DEFAULT_MAX_PDU_SIZE	1009    /* Sized for 3-DH5 packet */
+#define L2CAP_DEFAULT_ACK_TO		200
+#define L2CAP_LE_DEFAULT_MTU		23
+#define L2CAP_DEFAULT_MAX_SDU_SIZE	0xFFFF
+#define L2CAP_DEFAULT_SDU_ITIME		0xFFFFFFFF
+#define L2CAP_DEFAULT_ACC_LAT		0xFFFFFFFF
+
+#define L2CAP_DISC_TIMEOUT		msecs_to_jiffies(100)
+#define L2CAP_DISC_REJ_TIMEOUT		msecs_to_jiffies(5000)
+#define L2CAP_ENC_TIMEOUT		msecs_to_jiffies(5000)
+#define L2CAP_CONN_TIMEOUT		msecs_to_jiffies(40000)
+#define L2CAP_INFO_TIMEOUT		msecs_to_jiffies(4000)
+
+/* L2CAP socket address */
+struct sockaddr_l2 {
+	sa_family_t	l2_family;
+	__le16		l2_psm;
+	bdaddr_t	l2_bdaddr;
+	__le16		l2_cid;
+};
+
+/* L2CAP socket options */
+#define L2CAP_OPTIONS	0x01
+struct l2cap_options {
+	__u16 omtu;
+	__u16 imtu;
+	__u16 flush_to;
+	__u8  mode;
+	__u8  fcs;
+	__u8  max_tx;
+	__u16 txwin_size;
+};
+
+#define L2CAP_CONNINFO	0x02
+struct l2cap_conninfo {
+	__u16 hci_handle;
+	__u8  dev_class[3];
+};
+
+#define L2CAP_LM	0x03
+#define L2CAP_LM_MASTER		0x0001
+#define L2CAP_LM_AUTH		0x0002
+#define L2CAP_LM_ENCRYPT	0x0004
+#define L2CAP_LM_TRUSTED	0x0008
+#define L2CAP_LM_RELIABLE	0x0010
+#define L2CAP_LM_SECURE		0x0020
+
+/* L2CAP command codes */
+#define L2CAP_COMMAND_REJ	0x01
+#define L2CAP_CONN_REQ		0x02
+#define L2CAP_CONN_RSP		0x03
+#define L2CAP_CONF_REQ		0x04
+#define L2CAP_CONF_RSP		0x05
+#define L2CAP_DISCONN_REQ	0x06
+#define L2CAP_DISCONN_RSP	0x07
+#define L2CAP_ECHO_REQ		0x08
+#define L2CAP_ECHO_RSP		0x09
+#define L2CAP_INFO_REQ		0x0a
+#define L2CAP_INFO_RSP		0x0b
+#define L2CAP_CREATE_CHAN_REQ	0x0c
+#define L2CAP_CREATE_CHAN_RSP	0x0d
+#define L2CAP_MOVE_CHAN_REQ	0x0e
+#define L2CAP_MOVE_CHAN_RSP	0x0f
+#define L2CAP_MOVE_CHAN_CFM	0x10
+#define L2CAP_MOVE_CHAN_CFM_RSP	0x11
+#define L2CAP_CONN_PARAM_UPDATE_REQ	0x12
+#define L2CAP_CONN_PARAM_UPDATE_RSP	0x13
+
+/* L2CAP extended feature mask */
+#define L2CAP_FEAT_FLOWCTL	0x00000001
+#define L2CAP_FEAT_RETRANS	0x00000002
+#define L2CAP_FEAT_BIDIR_QOS	0x00000004
+#define L2CAP_FEAT_ERTM		0x00000008
+#define L2CAP_FEAT_STREAMING	0x00000010
+#define L2CAP_FEAT_FCS		0x00000020
+#define L2CAP_FEAT_EXT_FLOW	0x00000040
+#define L2CAP_FEAT_FIXED_CHAN	0x00000080
+#define L2CAP_FEAT_EXT_WINDOW	0x00000100
+#define L2CAP_FEAT_UCD		0x00000200
+
+/* L2CAP checksum option */
+#define L2CAP_FCS_NONE		0x00
+#define L2CAP_FCS_CRC16		0x01
+
+/* L2CAP fixed channels */
+#define L2CAP_FC_L2CAP		0x02
+#define L2CAP_FC_A2MP		0x08
+
+/* L2CAP Control Field bit masks */
+#define L2CAP_CTRL_SAR			0xC000
+#define L2CAP_CTRL_REQSEQ		0x3F00
+#define L2CAP_CTRL_TXSEQ		0x007E
+#define L2CAP_CTRL_SUPERVISE		0x000C
+
+#define L2CAP_CTRL_RETRANS		0x0080
+#define L2CAP_CTRL_FINAL		0x0080
+#define L2CAP_CTRL_POLL			0x0010
+#define L2CAP_CTRL_FRAME_TYPE		0x0001 /* I- or S-Frame */
+
+#define L2CAP_CTRL_TXSEQ_SHIFT		1
+#define L2CAP_CTRL_SUPER_SHIFT		2
+#define L2CAP_CTRL_REQSEQ_SHIFT		8
+#define L2CAP_CTRL_SAR_SHIFT		14
+
+/* L2CAP Extended Control Field bit mask */
+#define L2CAP_EXT_CTRL_TXSEQ		0xFFFC0000
+#define L2CAP_EXT_CTRL_SAR		0x00030000
+#define L2CAP_EXT_CTRL_SUPERVISE	0x00030000
+#define L2CAP_EXT_CTRL_REQSEQ		0x0000FFFC
+
+#define L2CAP_EXT_CTRL_POLL		0x00040000
+#define L2CAP_EXT_CTRL_FINAL		0x00000002
+#define L2CAP_EXT_CTRL_FRAME_TYPE	0x00000001 /* I- or S-Frame */
+
+#define L2CAP_EXT_CTRL_REQSEQ_SHIFT	2
+#define L2CAP_EXT_CTRL_SAR_SHIFT	16
+#define L2CAP_EXT_CTRL_SUPER_SHIFT	16
+#define L2CAP_EXT_CTRL_TXSEQ_SHIFT	18
+
+/* L2CAP Supervisory Function */
+#define L2CAP_SUPER_RR		0x00
+#define L2CAP_SUPER_REJ		0x01
+#define L2CAP_SUPER_RNR		0x02
+#define L2CAP_SUPER_SREJ	0x03
+
+/* L2CAP Segmentation and Reassembly */
+#define L2CAP_SAR_UNSEGMENTED	0x00
+#define L2CAP_SAR_START		0x01
+#define L2CAP_SAR_END		0x02
+#define L2CAP_SAR_CONTINUE	0x03
+
+/* L2CAP Command rej. reasons */
+#define L2CAP_REJ_NOT_UNDERSTOOD	0x0000
+#define L2CAP_REJ_MTU_EXCEEDED		0x0001
+#define L2CAP_REJ_INVALID_CID		0x0002
+
+/* L2CAP structures */
+struct l2cap_hdr {
+	__le16     len;
+	__le16     cid;
+} __packed;
+#define L2CAP_HDR_SIZE		4
+#define L2CAP_ENH_HDR_SIZE	6
+#define L2CAP_EXT_HDR_SIZE	8
+
+#define L2CAP_FCS_SIZE		2
+#define L2CAP_SDULEN_SIZE	2
+#define L2CAP_PSMLEN_SIZE	2
+
+struct l2cap_cmd_hdr {
+	__u8       code;
+	__u8       ident;
+	__le16     len;
+} __packed;
+#define L2CAP_CMD_HDR_SIZE	4
+
+struct l2cap_cmd_rej_unk {
+	__le16     reason;
+} __packed;
+
+struct l2cap_cmd_rej_mtu {
+	__le16     reason;
+	__le16     max_mtu;
+} __packed;
+
+struct l2cap_cmd_rej_cid {
+	__le16     reason;
+	__le16     scid;
+	__le16     dcid;
+} __packed;
+
+struct l2cap_conn_req {
+	__le16     psm;
+	__le16     scid;
+} __packed;
+
+struct l2cap_conn_rsp {
+	__le16     dcid;
+	__le16     scid;
+	__le16     result;
+	__le16     status;
+} __packed;
+
+/* channel indentifier */
+#define L2CAP_CID_SIGNALING	0x0001
+#define L2CAP_CID_CONN_LESS	0x0002
+#define L2CAP_CID_LE_DATA	0x0004
+#define L2CAP_CID_LE_SIGNALING	0x0005
+#define L2CAP_CID_SMP		0x0006
+#define L2CAP_CID_DYN_START	0x0040
+#define L2CAP_CID_DYN_END	0xffff
+
+/* connect/create channel results */
+#define L2CAP_CR_SUCCESS	0x0000
+#define L2CAP_CR_PEND		0x0001
+#define L2CAP_CR_BAD_PSM	0x0002
+#define L2CAP_CR_SEC_BLOCK	0x0003
+#define L2CAP_CR_NO_MEM		0x0004
+#define L2CAP_CR_BAD_AMP	0x0005
+
+/* connect/create channel status */
+#define L2CAP_CS_NO_INFO	0x0000
+#define L2CAP_CS_AUTHEN_PEND	0x0001
+#define L2CAP_CS_AUTHOR_PEND	0x0002
+
+struct l2cap_conf_req {
+	__le16     dcid;
+	__le16     flags;
+	__u8       data[0];
+} __packed;
+
+struct l2cap_conf_rsp {
+	__le16     scid;
+	__le16     flags;
+	__le16     result;
+	__u8       data[0];
+} __packed;
+
+#define L2CAP_CONF_SUCCESS	0x0000
+#define L2CAP_CONF_UNACCEPT	0x0001
+#define L2CAP_CONF_REJECT	0x0002
+#define L2CAP_CONF_UNKNOWN	0x0003
+#define L2CAP_CONF_PENDING	0x0004
+#define L2CAP_CONF_EFS_REJECT	0x0005
+
+struct l2cap_conf_opt {
+	__u8       type;
+	__u8       len;
+	__u8       val[0];
+} __packed;
+#define L2CAP_CONF_OPT_SIZE	2
+
+#define L2CAP_CONF_HINT		0x80
+#define L2CAP_CONF_MASK		0x7f
+
+#define L2CAP_CONF_MTU		0x01
+#define L2CAP_CONF_FLUSH_TO	0x02
+#define L2CAP_CONF_QOS		0x03
+#define L2CAP_CONF_RFC		0x04
+#define L2CAP_CONF_FCS		0x05
+#define L2CAP_CONF_EFS		0x06
+#define L2CAP_CONF_EWS		0x07
+
+#define L2CAP_CONF_MAX_SIZE	22
+
+struct l2cap_conf_rfc {
+	__u8       mode;
+	__u8       txwin_size;
+	__u8       max_transmit;
+	__le16     retrans_timeout;
+	__le16     monitor_timeout;
+	__le16     max_pdu_size;
+} __packed;
+
+#define L2CAP_MODE_BASIC	0x00
+#define L2CAP_MODE_RETRANS	0x01
+#define L2CAP_MODE_FLOWCTL	0x02
+#define L2CAP_MODE_ERTM		0x03
+#define L2CAP_MODE_STREAMING	0x04
+
+struct l2cap_conf_efs {
+	__u8	id;
+	__u8	stype;
+	__le16	msdu;
+	__le32	sdu_itime;
+	__le32	acc_lat;
+	__le32	flush_to;
+} __packed;
+
+#define L2CAP_SERV_NOTRAFIC	0x00
+#define L2CAP_SERV_BESTEFFORT	0x01
+#define L2CAP_SERV_GUARANTEED	0x02
+
+#define L2CAP_BESTEFFORT_ID	0x01
+
+struct l2cap_disconn_req {
+	__le16     dcid;
+	__le16     scid;
+} __packed;
+
+struct l2cap_disconn_rsp {
+	__le16     dcid;
+	__le16     scid;
+} __packed;
+
+struct l2cap_info_req {
+	__le16      type;
+} __packed;
+
+struct l2cap_info_rsp {
+	__le16      type;
+	__le16      result;
+	__u8        data[0];
+} __packed;
+
+struct l2cap_create_chan_req {
+	__le16      psm;
+	__le16      scid;
+	__u8        amp_id;
+} __packed;
+
+struct l2cap_create_chan_rsp {
+	__le16      dcid;
+	__le16      scid;
+	__le16      result;
+	__le16      status;
+} __packed;
+
+struct l2cap_move_chan_req {
+	__le16      icid;
+	__u8        dest_amp_id;
+} __packed;
+
+struct l2cap_move_chan_rsp {
+	__le16      icid;
+	__le16      result;
+} __packed;
+
+#define L2CAP_MR_SUCCESS	0x0000
+#define L2CAP_MR_PEND		0x0001
+#define L2CAP_MR_BAD_ID		0x0002
+#define L2CAP_MR_SAME_ID	0x0003
+#define L2CAP_MR_NOT_SUPP	0x0004
+#define L2CAP_MR_COLLISION	0x0005
+#define L2CAP_MR_NOT_ALLOWED	0x0006
+
+struct l2cap_move_chan_cfm {
+	__le16      icid;
+	__le16      result;
+} __packed;
+
+#define L2CAP_MC_CONFIRMED	0x0000
+#define L2CAP_MC_UNCONFIRMED	0x0001
+
+struct l2cap_move_chan_cfm_rsp {
+	__le16      icid;
+} __packed;
+
+/* info type */
+#define L2CAP_IT_CL_MTU		0x0001
+#define L2CAP_IT_FEAT_MASK	0x0002
+#define L2CAP_IT_FIXED_CHAN	0x0003
+
+/* info result */
+#define L2CAP_IR_SUCCESS	0x0000
+#define L2CAP_IR_NOTSUPP	0x0001
+
+struct l2cap_conn_param_update_req {
+	__le16      min;
+	__le16      max;
+	__le16      latency;
+	__le16      to_multiplier;
+} __packed;
+
+struct l2cap_conn_param_update_rsp {
+	__le16      result;
+} __packed;
+
+/* Connection Parameters result */
+#define L2CAP_CONN_PARAM_ACCEPTED	0x0000
+#define L2CAP_CONN_PARAM_REJECTED	0x0001
+
+/* ----- L2CAP channels and connections ----- */
+struct srej_list {
+	__u16	tx_seq;
+	struct list_head list;
+};
+
+struct l2cap_chan {
+	struct sock *sk;
+
+	struct l2cap_conn	*conn;
+
+	__u8		state;
+
+	atomic_t	refcnt;
+
+	__le16		psm;
+	__u16		dcid;
+	__u16		scid;
+
+	__u16		imtu;
+	__u16		omtu;
+	__u16		flush_to;
+	__u8		mode;
+	__u8		chan_type;
+	__u8		chan_policy;
+
+	__le16		sport;
+
+	__u8		sec_level;
+
+	__u8		ident;
+
+	__u8		conf_req[64];
+	__u8		conf_len;
+	__u8		num_conf_req;
+	__u8		num_conf_rsp;
+
+	__u8		fcs;
+
+	__u16		tx_win;
+	__u16		tx_win_max;
+	__u8		max_tx;
+	__u16		retrans_timeout;
+	__u16		monitor_timeout;
+	__u16		mps;
+
+	unsigned long	conf_state;
+	unsigned long	conn_state;
+	unsigned long	flags;
+
+	__u16		next_tx_seq;
+	__u16		expected_ack_seq;
+	__u16		expected_tx_seq;
+	__u16		buffer_seq;
+	__u16		buffer_seq_srej;
+	__u16		srej_save_reqseq;
+	__u16		frames_sent;
+	__u16		unacked_frames;
+	__u8		retry_count;
+	__u8		num_acked;
+	__u16		sdu_len;
+	struct sk_buff	*sdu;
+	struct sk_buff	*sdu_last_frag;
+
+	__u16		remote_tx_win;
+	__u8		remote_max_tx;
+	__u16		remote_mps;
+
+	__u8		local_id;
+	__u8		local_stype;
+	__u16		local_msdu;
+	__u32		local_sdu_itime;
+	__u32		local_acc_lat;
+	__u32		local_flush_to;
+
+	__u8		remote_id;
+	__u8		remote_stype;
+	__u16		remote_msdu;
+	__u32		remote_sdu_itime;
+	__u32		remote_acc_lat;
+	__u32		remote_flush_to;
+
+	struct delayed_work	chan_timer;
+	struct delayed_work	retrans_timer;
+	struct delayed_work	monitor_timer;
+	struct delayed_work	ack_timer;
+
+	struct sk_buff		*tx_send_head;
+	struct sk_buff_head	tx_q;
+	struct sk_buff_head	srej_q;
+	struct list_head	srej_l;
+
+	struct list_head	list;
+	struct list_head	global_l;
+
+	void			*data;
+	struct l2cap_ops	*ops;
+	struct mutex		lock;
+};
+
+struct l2cap_ops {
+	char			*name;
+
+	struct l2cap_chan	*(*new_connection) (void *data);
+	int			(*recv) (void *data, struct sk_buff *skb);
+	void			(*close) (void *data);
+	void			(*state_change) (void *data, int state);
+	struct sk_buff		*(*alloc_skb) (struct l2cap_chan *chan,
+					unsigned long len, int nb, int *err);
+
+};
+
+struct l2cap_conn {
+	struct hci_conn		*hcon;
+	struct hci_chan		*hchan;
+
+	bdaddr_t		*dst;
+	bdaddr_t		*src;
+
+	unsigned int		mtu;
+
+	__u32			feat_mask;
+	__u8			fixed_chan_mask;
+
+	__u8			info_state;
+	__u8			info_ident;
+
+	struct delayed_work	info_timer;
+
+	spinlock_t		lock;
+
+	struct sk_buff		*rx_skb;
+	__u32			rx_len;
+	__u8			tx_ident;
+
+	__u8			disc_reason;
+
+	struct delayed_work	security_timer;
+	struct smp_chan		*smp_chan;
+
+	struct list_head	chan_l;
+	struct mutex		chan_lock;
+};
+
+#define L2CAP_INFO_CL_MTU_REQ_SENT	0x01
+#define L2CAP_INFO_FEAT_MASK_REQ_SENT	0x04
+#define L2CAP_INFO_FEAT_MASK_REQ_DONE	0x08
+
+#define L2CAP_CHAN_RAW			1
+#define L2CAP_CHAN_CONN_LESS		2
+#define L2CAP_CHAN_CONN_ORIENTED	3
+
+/* ----- L2CAP socket info ----- */
+#define l2cap_pi(sk) ((struct l2cap_pinfo *) sk)
+
+struct l2cap_pinfo {
+	struct bt_sock		bt;
+	struct l2cap_chan	*chan;
+	struct sk_buff		*rx_busy_skb;
+};
+
+enum {
+	CONF_REQ_SENT,
+	CONF_INPUT_DONE,
+	CONF_OUTPUT_DONE,
+	CONF_MTU_DONE,
+	CONF_MODE_DONE,
+	CONF_CONNECT_PEND,
+	CONF_NO_FCS_RECV,
+	CONF_STATE2_DEVICE,
+	CONF_EWS_RECV,
+	CONF_LOC_CONF_PEND,
+	CONF_REM_CONF_PEND,
+};
+
+#define L2CAP_CONF_MAX_CONF_REQ 2
+#define L2CAP_CONF_MAX_CONF_RSP 2
+
+enum {
+	CONN_SREJ_SENT,
+	CONN_WAIT_F,
+	CONN_SREJ_ACT,
+	CONN_SEND_PBIT,
+	CONN_REMOTE_BUSY,
+	CONN_LOCAL_BUSY,
+	CONN_REJ_ACT,
+	CONN_SEND_FBIT,
+	CONN_RNR_SENT,
+};
+
+/* Definitions for flags in l2cap_chan */
+enum {
+	FLAG_ROLE_SWITCH,
+	FLAG_FORCE_ACTIVE,
+	FLAG_FORCE_RELIABLE,
+	FLAG_FLUSHABLE,
+	FLAG_EXT_CTRL,
+	FLAG_EFS_ENABLE,
+};
+
+static inline void l2cap_chan_hold(struct l2cap_chan *c)
+{
+	atomic_inc(&c->refcnt);
+}
+
+static inline void l2cap_chan_put(struct l2cap_chan *c)
+{
+	if (atomic_dec_and_test(&c->refcnt))
+		kfree(c);
+}
+
+static inline void l2cap_chan_lock(struct l2cap_chan *chan)
+{
+	mutex_lock(&chan->lock);
+}
+
+static inline void l2cap_chan_unlock(struct l2cap_chan *chan)
+{
+	mutex_unlock(&chan->lock);
+}
+
+static inline void l2cap_set_timer(struct l2cap_chan *chan,
+					struct delayed_work *work, long timeout)
+{
+	BT_DBG("chan %p state %s timeout %ld", chan,
+					state_to_string(chan->state), timeout);
+
+	if (!cancel_delayed_work(work))
+		l2cap_chan_hold(chan);
+	schedule_delayed_work(work, timeout);
+}
+
+static inline bool l2cap_clear_timer(struct l2cap_chan *chan,
+					struct delayed_work *work)
+{
+	bool ret;
+
+	ret = cancel_delayed_work(work);
+	if (ret)
+		l2cap_chan_put(chan);
+
+	return ret;
+}
+
+#define __set_chan_timer(c, t) l2cap_set_timer(c, &c->chan_timer, (t))
+#define __clear_chan_timer(c) l2cap_clear_timer(c, &c->chan_timer)
+#define __set_retrans_timer(c) l2cap_set_timer(c, &c->retrans_timer, \
+		msecs_to_jiffies(L2CAP_DEFAULT_RETRANS_TO));
+#define __clear_retrans_timer(c) l2cap_clear_timer(c, &c->retrans_timer)
+#define __set_monitor_timer(c) l2cap_set_timer(c, &c->monitor_timer, \
+		msecs_to_jiffies(L2CAP_DEFAULT_MONITOR_TO));
+#define __clear_monitor_timer(c) l2cap_clear_timer(c, &c->monitor_timer)
+#define __set_ack_timer(c) l2cap_set_timer(c, &chan->ack_timer, \
+		msecs_to_jiffies(L2CAP_DEFAULT_ACK_TO));
+#define __clear_ack_timer(c) l2cap_clear_timer(c, &c->ack_timer)
+
+static inline int __seq_offset(struct l2cap_chan *chan, __u16 seq1, __u16 seq2)
+{
+	int offset;
+
+	offset = (seq1 - seq2) % (chan->tx_win_max + 1);
+	if (offset < 0)
+		offset += (chan->tx_win_max + 1);
+
+	return offset;
+}
+
+static inline __u16 __next_seq(struct l2cap_chan *chan, __u16 seq)
+{
+	return (seq + 1) % (chan->tx_win_max + 1);
+}
+
+static inline int l2cap_tx_window_full(struct l2cap_chan *ch)
+{
+	int sub;
+
+	sub = (ch->next_tx_seq - ch->expected_ack_seq) % 64;
+
+	if (sub < 0)
+		sub += 64;
+
+	return sub == ch->remote_tx_win;
+}
+
+static inline __u16 __get_reqseq(struct l2cap_chan *chan, __u32 ctrl)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return (ctrl & L2CAP_EXT_CTRL_REQSEQ) >>
+						L2CAP_EXT_CTRL_REQSEQ_SHIFT;
+	else
+		return (ctrl & L2CAP_CTRL_REQSEQ) >> L2CAP_CTRL_REQSEQ_SHIFT;
+}
+
+static inline __u32 __set_reqseq(struct l2cap_chan *chan, __u32 reqseq)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return (reqseq << L2CAP_EXT_CTRL_REQSEQ_SHIFT) &
+							L2CAP_EXT_CTRL_REQSEQ;
+	else
+		return (reqseq << L2CAP_CTRL_REQSEQ_SHIFT) & L2CAP_CTRL_REQSEQ;
+}
+
+static inline __u16 __get_txseq(struct l2cap_chan *chan, __u32 ctrl)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return (ctrl & L2CAP_EXT_CTRL_TXSEQ) >>
+						L2CAP_EXT_CTRL_TXSEQ_SHIFT;
+	else
+		return (ctrl & L2CAP_CTRL_TXSEQ) >> L2CAP_CTRL_TXSEQ_SHIFT;
+}
+
+static inline __u32 __set_txseq(struct l2cap_chan *chan, __u32 txseq)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return (txseq << L2CAP_EXT_CTRL_TXSEQ_SHIFT) &
+							L2CAP_EXT_CTRL_TXSEQ;
+	else
+		return (txseq << L2CAP_CTRL_TXSEQ_SHIFT) & L2CAP_CTRL_TXSEQ;
+}
+
+static inline bool __is_sframe(struct l2cap_chan *chan, __u32 ctrl)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return ctrl & L2CAP_EXT_CTRL_FRAME_TYPE;
+	else
+		return ctrl & L2CAP_CTRL_FRAME_TYPE;
+}
+
+static inline __u32 __set_sframe(struct l2cap_chan *chan)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return L2CAP_EXT_CTRL_FRAME_TYPE;
+	else
+		return L2CAP_CTRL_FRAME_TYPE;
+}
+
+static inline __u8 __get_ctrl_sar(struct l2cap_chan *chan, __u32 ctrl)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return (ctrl & L2CAP_EXT_CTRL_SAR) >> L2CAP_EXT_CTRL_SAR_SHIFT;
+	else
+		return (ctrl & L2CAP_CTRL_SAR) >> L2CAP_CTRL_SAR_SHIFT;
+}
+
+static inline __u32 __set_ctrl_sar(struct l2cap_chan *chan, __u32 sar)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return (sar << L2CAP_EXT_CTRL_SAR_SHIFT) & L2CAP_EXT_CTRL_SAR;
+	else
+		return (sar << L2CAP_CTRL_SAR_SHIFT) & L2CAP_CTRL_SAR;
+}
+
+static inline bool __is_sar_start(struct l2cap_chan *chan, __u32 ctrl)
+{
+	return __get_ctrl_sar(chan, ctrl) == L2CAP_SAR_START;
+}
+
+static inline __u32 __get_sar_mask(struct l2cap_chan *chan)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return L2CAP_EXT_CTRL_SAR;
+	else
+		return L2CAP_CTRL_SAR;
+}
+
+static inline __u8 __get_ctrl_super(struct l2cap_chan *chan, __u32 ctrl)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return (ctrl & L2CAP_EXT_CTRL_SUPERVISE) >>
+						L2CAP_EXT_CTRL_SUPER_SHIFT;
+	else
+		return (ctrl & L2CAP_CTRL_SUPERVISE) >> L2CAP_CTRL_SUPER_SHIFT;
+}
+
+static inline __u32 __set_ctrl_super(struct l2cap_chan *chan, __u32 super)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return (super << L2CAP_EXT_CTRL_SUPER_SHIFT) &
+						L2CAP_EXT_CTRL_SUPERVISE;
+	else
+		return (super << L2CAP_CTRL_SUPER_SHIFT) &
+							L2CAP_CTRL_SUPERVISE;
+}
+
+static inline __u32 __set_ctrl_final(struct l2cap_chan *chan)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return L2CAP_EXT_CTRL_FINAL;
+	else
+		return L2CAP_CTRL_FINAL;
+}
+
+static inline bool __is_ctrl_final(struct l2cap_chan *chan, __u32 ctrl)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return ctrl & L2CAP_EXT_CTRL_FINAL;
+	else
+		return ctrl & L2CAP_CTRL_FINAL;
+}
+
+static inline __u32 __set_ctrl_poll(struct l2cap_chan *chan)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return L2CAP_EXT_CTRL_POLL;
+	else
+		return L2CAP_CTRL_POLL;
+}
+
+static inline bool __is_ctrl_poll(struct l2cap_chan *chan, __u32 ctrl)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return ctrl & L2CAP_EXT_CTRL_POLL;
+	else
+		return ctrl & L2CAP_CTRL_POLL;
+}
+
+static inline __u32 __get_control(struct l2cap_chan *chan, void *p)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return get_unaligned_le32(p);
+	else
+		return get_unaligned_le16(p);
+}
+
+static inline void __put_control(struct l2cap_chan *chan, __u32 control,
+								void *p)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return put_unaligned_le32(control, p);
+	else
+		return put_unaligned_le16(control, p);
+}
+
+static inline __u8 __ctrl_size(struct l2cap_chan *chan)
+{
+	if (test_bit(FLAG_EXT_CTRL, &chan->flags))
+		return L2CAP_EXT_HDR_SIZE - L2CAP_HDR_SIZE;
+	else
+		return L2CAP_ENH_HDR_SIZE - L2CAP_HDR_SIZE;
+}
+
+extern bool disable_ertm;
+
+int l2cap_init_sockets(void);
+void l2cap_cleanup_sockets(void);
+
+void __l2cap_connect_rsp_defer(struct l2cap_chan *chan);
+int __l2cap_wait_ack(struct sock *sk);
+
+int l2cap_add_psm(struct l2cap_chan *chan, bdaddr_t *src, __le16 psm);
+int l2cap_add_scid(struct l2cap_chan *chan,  __u16 scid);
+
+struct l2cap_chan *l2cap_chan_create(struct sock *sk);
+void l2cap_chan_close(struct l2cap_chan *chan, int reason);
+void l2cap_chan_destroy(struct l2cap_chan *chan);
+int l2cap_chan_connect(struct l2cap_chan *chan, __le16 psm, u16 cid,
+								bdaddr_t *dst);
+int l2cap_chan_send(struct l2cap_chan *chan, struct msghdr *msg, size_t len,
+								u32 priority);
+void l2cap_chan_busy(struct l2cap_chan *chan, int busy);
+int l2cap_chan_check_security(struct l2cap_chan *chan);
+
+#endif /* __L2CAP_H */
diff --git a/include/net/bluetooth/mgmt.h b/include/net/bluetooth/mgmt.h
new file mode 100644
index 00000000..ebfd91fc
--- /dev/null
+++ b/include/net/bluetooth/mgmt.h
@@ -0,0 +1,462 @@
+/*
+   BlueZ - Bluetooth protocol stack for Linux
+
+   Copyright (C) 2010  Nokia Corporation
+   Copyright (C) 2011-2012  Intel Corporation
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License version 2 as
+   published by the Free Software Foundation;
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
+   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
+   SOFTWARE IS DISCLAIMED.
+*/
+
+#define MGMT_INDEX_NONE			0xFFFF
+
+#define MGMT_STATUS_SUCCESS		0x00
+#define MGMT_STATUS_UNKNOWN_COMMAND	0x01
+#define MGMT_STATUS_NOT_CONNECTED	0x02
+#define MGMT_STATUS_FAILED		0x03
+#define MGMT_STATUS_CONNECT_FAILED	0x04
+#define MGMT_STATUS_AUTH_FAILED		0x05
+#define MGMT_STATUS_NOT_PAIRED		0x06
+#define MGMT_STATUS_NO_RESOURCES	0x07
+#define MGMT_STATUS_TIMEOUT		0x08
+#define MGMT_STATUS_ALREADY_CONNECTED	0x09
+#define MGMT_STATUS_BUSY		0x0a
+#define MGMT_STATUS_REJECTED		0x0b
+#define MGMT_STATUS_NOT_SUPPORTED	0x0c
+#define MGMT_STATUS_INVALID_PARAMS	0x0d
+#define MGMT_STATUS_DISCONNECTED	0x0e
+#define MGMT_STATUS_NOT_POWERED		0x0f
+#define MGMT_STATUS_CANCELLED		0x10
+#define MGMT_STATUS_INVALID_INDEX	0x11
+
+struct mgmt_hdr {
+	__le16	opcode;
+	__le16	index;
+	__le16	len;
+} __packed;
+
+struct mgmt_addr_info {
+	bdaddr_t	bdaddr;
+	__u8		type;
+} __packed;
+#define MGMT_ADDR_INFO_SIZE		7
+
+#define MGMT_OP_READ_VERSION		0x0001
+#define MGMT_READ_VERSION_SIZE		0
+struct mgmt_rp_read_version {
+	__u8	version;
+	__le16	revision;
+} __packed;
+
+#define MGMT_OP_READ_COMMANDS		0x0002
+#define MGMT_READ_COMMANDS_SIZE		0
+struct mgmt_rp_read_commands {
+	__le16	num_commands;
+	__le16	num_events;
+	__le16	opcodes[0];
+} __packed;
+
+#define MGMT_OP_READ_INDEX_LIST		0x0003
+#define MGMT_READ_INDEX_LIST_SIZE	0
+struct mgmt_rp_read_index_list {
+	__le16	num_controllers;
+	__le16	index[0];
+} __packed;
+
+/* Reserve one extra byte for names in management messages so that they
+ * are always guaranteed to be nul-terminated */
+#define MGMT_MAX_NAME_LENGTH		(HCI_MAX_NAME_LENGTH + 1)
+#define MGMT_MAX_SHORT_NAME_LENGTH	(HCI_MAX_SHORT_NAME_LENGTH + 1)
+
+#define MGMT_SETTING_POWERED		0x00000001
+#define MGMT_SETTING_CONNECTABLE	0x00000002
+#define MGMT_SETTING_FAST_CONNECTABLE	0x00000004
+#define MGMT_SETTING_DISCOVERABLE	0x00000008
+#define MGMT_SETTING_PAIRABLE		0x00000010
+#define MGMT_SETTING_LINK_SECURITY	0x00000020
+#define MGMT_SETTING_SSP		0x00000040
+#define MGMT_SETTING_BREDR		0x00000080
+#define MGMT_SETTING_HS			0x00000100
+#define MGMT_SETTING_LE			0x00000200
+
+#define MGMT_OP_READ_INFO		0x0004
+#define MGMT_READ_INFO_SIZE		0
+struct mgmt_rp_read_info {
+	bdaddr_t	bdaddr;
+	__u8		version;
+	__le16		manufacturer;
+	__le32		supported_settings;
+	__le32		current_settings;
+	__u8		dev_class[3];
+	__u8		name[MGMT_MAX_NAME_LENGTH];
+	__u8		short_name[MGMT_MAX_SHORT_NAME_LENGTH];
+} __packed;
+
+struct mgmt_mode {
+	__u8 val;
+} __packed;
+
+#define MGMT_SETTING_SIZE		1
+
+#define MGMT_OP_SET_POWERED		0x0005
+
+#define MGMT_OP_SET_DISCOVERABLE	0x0006
+struct mgmt_cp_set_discoverable {
+	__u8	val;
+	__le16	timeout;
+} __packed;
+#define MGMT_SET_DISCOVERABLE_SIZE	3
+
+#define MGMT_OP_SET_CONNECTABLE		0x0007
+
+#define MGMT_OP_SET_FAST_CONNECTABLE	0x0008
+
+#define MGMT_OP_SET_PAIRABLE		0x0009
+
+#define MGMT_OP_SET_LINK_SECURITY	0x000A
+
+#define MGMT_OP_SET_SSP			0x000B
+
+#define MGMT_OP_SET_HS			0x000C
+
+#define MGMT_OP_SET_LE			0x000D
+#define MGMT_OP_SET_DEV_CLASS		0x000E
+struct mgmt_cp_set_dev_class {
+	__u8	major;
+	__u8	minor;
+} __packed;
+#define MGMT_SET_DEV_CLASS_SIZE		2
+
+#define MGMT_OP_SET_LOCAL_NAME		0x000F
+struct mgmt_cp_set_local_name {
+	__u8	name[MGMT_MAX_NAME_LENGTH];
+	__u8	short_name[MGMT_MAX_SHORT_NAME_LENGTH];
+} __packed;
+#define MGMT_SET_LOCAL_NAME_SIZE	260
+
+#define MGMT_OP_ADD_UUID		0x0010
+struct mgmt_cp_add_uuid {
+	__u8	uuid[16];
+	__u8	svc_hint;
+} __packed;
+#define MGMT_ADD_UUID_SIZE		17
+
+#define MGMT_OP_REMOVE_UUID		0x0011
+struct mgmt_cp_remove_uuid {
+	__u8	uuid[16];
+} __packed;
+#define MGMT_REMOVE_UUID_SIZE		16
+
+struct mgmt_link_key_info {
+	struct mgmt_addr_info addr;
+	__u8	type;
+	__u8	val[16];
+	__u8	pin_len;
+} __packed;
+
+#define MGMT_OP_LOAD_LINK_KEYS		0x0012
+struct mgmt_cp_load_link_keys {
+	__u8	debug_keys;
+	__le16	key_count;
+	struct	mgmt_link_key_info keys[0];
+} __packed;
+#define MGMT_LOAD_LINK_KEYS_SIZE	3
+
+struct mgmt_ltk_info {
+	struct mgmt_addr_info addr;
+	__u8	authenticated;
+	__u8	master;
+	__u8	enc_size;
+	__le16	ediv;
+	__u8	rand[8];
+	__u8	val[16];
+} __packed;
+
+#define MGMT_OP_LOAD_LONG_TERM_KEYS	0x0013
+struct mgmt_cp_load_long_term_keys {
+	__le16	key_count;
+	struct	mgmt_ltk_info keys[0];
+} __packed;
+#define MGMT_LOAD_LONG_TERM_KEYS_SIZE	2
+
+#define MGMT_OP_DISCONNECT		0x0014
+struct mgmt_cp_disconnect {
+	struct mgmt_addr_info addr;
+} __packed;
+#define MGMT_DISCONNECT_SIZE		MGMT_ADDR_INFO_SIZE
+struct mgmt_rp_disconnect {
+	struct mgmt_addr_info addr;
+} __packed;
+
+#define MGMT_OP_GET_CONNECTIONS		0x0015
+#define MGMT_GET_CONNECTIONS_SIZE	0
+struct mgmt_rp_get_connections {
+	__le16 conn_count;
+	struct mgmt_addr_info addr[0];
+} __packed;
+
+#define MGMT_OP_PIN_CODE_REPLY		0x0016
+struct mgmt_cp_pin_code_reply {
+	struct mgmt_addr_info addr;
+	__u8	pin_len;
+	__u8	pin_code[16];
+} __packed;
+#define MGMT_PIN_CODE_REPLY_SIZE	(MGMT_ADDR_INFO_SIZE + 17)
+struct mgmt_rp_pin_code_reply {
+	struct mgmt_addr_info addr;
+} __packed;
+
+#define MGMT_OP_PIN_CODE_NEG_REPLY	0x0017
+struct mgmt_cp_pin_code_neg_reply {
+	struct mgmt_addr_info addr;
+} __packed;
+#define MGMT_PIN_CODE_NEG_REPLY_SIZE	MGMT_ADDR_INFO_SIZE
+
+#define MGMT_OP_SET_IO_CAPABILITY	0x0018
+struct mgmt_cp_set_io_capability {
+	__u8	io_capability;
+} __packed;
+#define MGMT_SET_IO_CAPABILITY_SIZE	1
+
+#define MGMT_OP_PAIR_DEVICE		0x0019
+struct mgmt_cp_pair_device {
+	struct mgmt_addr_info addr;
+	__u8	io_cap;
+} __packed;
+#define MGMT_PAIR_DEVICE_SIZE		(MGMT_ADDR_INFO_SIZE + 1)
+struct mgmt_rp_pair_device {
+	struct mgmt_addr_info addr;
+} __packed;
+
+#define MGMT_OP_CANCEL_PAIR_DEVICE	0x001A
+#define MGMT_CANCEL_PAIR_DEVICE_SIZE	MGMT_ADDR_INFO_SIZE
+
+#define MGMT_OP_UNPAIR_DEVICE		0x001B
+struct mgmt_cp_unpair_device {
+	struct mgmt_addr_info addr;
+	__u8 disconnect;
+} __packed;
+#define MGMT_UNPAIR_DEVICE_SIZE		(MGMT_ADDR_INFO_SIZE + 1)
+struct mgmt_rp_unpair_device {
+	struct mgmt_addr_info addr;
+};
+
+#define MGMT_OP_USER_CONFIRM_REPLY	0x001C
+struct mgmt_cp_user_confirm_reply {
+	struct mgmt_addr_info addr;
+} __packed;
+#define MGMT_USER_CONFIRM_REPLY_SIZE	MGMT_ADDR_INFO_SIZE
+struct mgmt_rp_user_confirm_reply {
+	struct mgmt_addr_info addr;
+} __packed;
+
+#define MGMT_OP_USER_CONFIRM_NEG_REPLY	0x001D
+struct mgmt_cp_user_confirm_neg_reply {
+	struct mgmt_addr_info addr;
+} __packed;
+#define MGMT_USER_CONFIRM_NEG_REPLY_SIZE MGMT_ADDR_INFO_SIZE
+
+#define MGMT_OP_USER_PASSKEY_REPLY	0x001E
+struct mgmt_cp_user_passkey_reply {
+	struct mgmt_addr_info addr;
+	__le32	passkey;
+} __packed;
+#define MGMT_USER_PASSKEY_REPLY_SIZE	(MGMT_ADDR_INFO_SIZE + 4)
+struct mgmt_rp_user_passkey_reply {
+	struct mgmt_addr_info addr;
+} __packed;
+
+#define MGMT_OP_USER_PASSKEY_NEG_REPLY	0x001F
+struct mgmt_cp_user_passkey_neg_reply {
+	struct mgmt_addr_info addr;
+} __packed;
+#define MGMT_USER_PASSKEY_NEG_REPLY_SIZE MGMT_ADDR_INFO_SIZE
+
+#define MGMT_OP_READ_LOCAL_OOB_DATA	0x0020
+#define MGMT_READ_LOCAL_OOB_DATA_SIZE	0
+struct mgmt_rp_read_local_oob_data {
+	__u8	hash[16];
+	__u8	randomizer[16];
+} __packed;
+
+#define MGMT_OP_ADD_REMOTE_OOB_DATA	0x0021
+struct mgmt_cp_add_remote_oob_data {
+	struct mgmt_addr_info addr;
+	__u8	hash[16];
+	__u8	randomizer[16];
+} __packed;
+#define MGMT_ADD_REMOTE_OOB_DATA_SIZE	(MGMT_ADDR_INFO_SIZE + 32)
+
+#define MGMT_OP_REMOVE_REMOTE_OOB_DATA	0x0022
+struct mgmt_cp_remove_remote_oob_data {
+	struct mgmt_addr_info addr;
+} __packed;
+#define MGMT_REMOVE_REMOTE_OOB_DATA_SIZE MGMT_ADDR_INFO_SIZE
+
+#define MGMT_OP_START_DISCOVERY		0x0023
+struct mgmt_cp_start_discovery {
+	__u8 type;
+} __packed;
+#define MGMT_START_DISCOVERY_SIZE	1
+
+#define MGMT_OP_STOP_DISCOVERY		0x0024
+struct mgmt_cp_stop_discovery {
+	__u8 type;
+} __packed;
+#define MGMT_STOP_DISCOVERY_SIZE	1
+
+#define MGMT_OP_CONFIRM_NAME		0x0025
+struct mgmt_cp_confirm_name {
+	struct mgmt_addr_info addr;
+	__u8	name_known;
+} __packed;
+#define MGMT_CONFIRM_NAME_SIZE		(MGMT_ADDR_INFO_SIZE + 1)
+struct mgmt_rp_confirm_name {
+	struct mgmt_addr_info addr;
+} __packed;
+
+#define MGMT_OP_BLOCK_DEVICE		0x0026
+struct mgmt_cp_block_device {
+	struct mgmt_addr_info addr;
+} __packed;
+#define MGMT_BLOCK_DEVICE_SIZE		MGMT_ADDR_INFO_SIZE
+
+#define MGMT_OP_UNBLOCK_DEVICE		0x0027
+struct mgmt_cp_unblock_device {
+	struct mgmt_addr_info addr;
+} __packed;
+#define MGMT_UNBLOCK_DEVICE_SIZE	MGMT_ADDR_INFO_SIZE
+
+#define MGMT_EV_CMD_COMPLETE		0x0001
+struct mgmt_ev_cmd_complete {
+	__le16	opcode;
+	__u8	status;
+	__u8	data[0];
+} __packed;
+
+#define MGMT_EV_CMD_STATUS		0x0002
+struct mgmt_ev_cmd_status {
+	__le16	opcode;
+	__u8	status;
+} __packed;
+
+#define MGMT_EV_CONTROLLER_ERROR	0x0003
+struct mgmt_ev_controller_error {
+	__u8	error_code;
+} __packed;
+
+#define MGMT_EV_INDEX_ADDED		0x0004
+
+#define MGMT_EV_INDEX_REMOVED		0x0005
+
+#define MGMT_EV_NEW_SETTINGS		0x0006
+
+#define MGMT_EV_CLASS_OF_DEV_CHANGED	0x0007
+struct mgmt_ev_class_of_dev_changed {
+	__u8	dev_class[3];
+};
+
+#define MGMT_EV_LOCAL_NAME_CHANGED	0x0008
+struct mgmt_ev_local_name_changed {
+	__u8	name[MGMT_MAX_NAME_LENGTH];
+	__u8	short_name[MGMT_MAX_SHORT_NAME_LENGTH];
+} __packed;
+
+#define MGMT_EV_NEW_LINK_KEY		0x0009
+struct mgmt_ev_new_link_key {
+	__u8	store_hint;
+	struct mgmt_link_key_info key;
+} __packed;
+
+#define MGMT_EV_NEW_LONG_TERM_KEY	0x000A
+struct mgmt_ev_new_long_term_key {
+	__u8	store_hint;
+	struct mgmt_ltk_info key;
+} __packed;
+
+#define MGMT_EV_DEVICE_CONNECTED	0x000B
+struct mgmt_ev_device_connected {
+	struct mgmt_addr_info addr;
+	__le32	flags;
+	__le16	eir_len;
+	__u8	eir[0];
+} __packed;
+
+#define MGMT_EV_DEVICE_DISCONNECTED	0x000C
+
+#define MGMT_EV_CONNECT_FAILED		0x000D
+struct mgmt_ev_connect_failed {
+	struct mgmt_addr_info addr;
+	__u8	status;
+} __packed;
+
+#define MGMT_EV_PIN_CODE_REQUEST	0x000E
+struct mgmt_ev_pin_code_request {
+	struct mgmt_addr_info addr;
+	__u8	secure;
+} __packed;
+
+#define MGMT_EV_USER_CONFIRM_REQUEST	0x000F
+struct mgmt_ev_user_confirm_request {
+	struct mgmt_addr_info addr;
+	__u8	confirm_hint;
+	__le32	value;
+} __packed;
+
+#define MGMT_EV_USER_PASSKEY_REQUEST	0x0010
+struct mgmt_ev_user_passkey_request {
+	struct mgmt_addr_info addr;
+} __packed;
+
+#define MGMT_EV_AUTH_FAILED		0x0011
+struct mgmt_ev_auth_failed {
+	struct mgmt_addr_info addr;
+	__u8	status;
+} __packed;
+
+#define MGMT_DEV_FOUND_CONFIRM_NAME    0x01
+#define MGMT_DEV_FOUND_LEGACY_PAIRING  0x02
+
+#define MGMT_EV_DEVICE_FOUND		0x0012
+struct mgmt_ev_device_found {
+	struct mgmt_addr_info addr;
+	__s8	rssi;
+	__u8	flags[4];
+	__le16	eir_len;
+	__u8	eir[0];
+} __packed;
+
+#define MGMT_EV_DISCOVERING		0x0013
+struct mgmt_ev_discovering {
+	__u8	type;
+	__u8	discovering;
+} __packed;
+
+#define MGMT_EV_DEVICE_BLOCKED		0x0014
+struct mgmt_ev_device_blocked {
+	struct mgmt_addr_info addr;
+} __packed;
+
+#define MGMT_EV_DEVICE_UNBLOCKED	0x0015
+struct mgmt_ev_device_unblocked {
+	struct mgmt_addr_info addr;
+} __packed;
+
+#define MGMT_EV_DEVICE_UNPAIRED		0x0016
+struct mgmt_ev_device_unpaired {
+	struct mgmt_addr_info addr;
+} __packed;
diff --git a/include/net/bluetooth/rfcomm.h b/include/net/bluetooth/rfcomm.h
new file mode 100644
index 00000000..e2e3ecad
--- /dev/null
+++ b/include/net/bluetooth/rfcomm.h
@@ -0,0 +1,372 @@
+/*
+   RFCOMM implementation for Linux Bluetooth stack (BlueZ)
+   Copyright (C) 2002 Maxim Krasnyansky <maxk@qualcomm.com>
+   Copyright (C) 2002 Marcel Holtmann <marcel@holtmann.org>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License version 2 as
+   published by the Free Software Foundation;
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
+   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
+   SOFTWARE IS DISCLAIMED.
+*/
+
+#ifndef __RFCOMM_H
+#define __RFCOMM_H
+
+#define RFCOMM_PSM 3
+
+#define RFCOMM_CONN_TIMEOUT (HZ * 30)
+#define RFCOMM_DISC_TIMEOUT (HZ * 20)
+#define RFCOMM_AUTH_TIMEOUT (HZ * 25)
+#define RFCOMM_IDLE_TIMEOUT (HZ * 2)
+
+#define RFCOMM_DEFAULT_MTU	127
+#define RFCOMM_DEFAULT_CREDITS	7
+
+#define RFCOMM_MAX_L2CAP_MTU	1013
+#define RFCOMM_MAX_CREDITS	40
+
+#define RFCOMM_SKB_HEAD_RESERVE	8
+#define RFCOMM_SKB_TAIL_RESERVE	2
+#define RFCOMM_SKB_RESERVE  (RFCOMM_SKB_HEAD_RESERVE + RFCOMM_SKB_TAIL_RESERVE)
+
+#define RFCOMM_SABM	0x2f
+#define RFCOMM_DISC	0x43
+#define RFCOMM_UA	0x63
+#define RFCOMM_DM	0x0f
+#define RFCOMM_UIH	0xef
+
+#define RFCOMM_TEST	0x08
+#define RFCOMM_FCON	0x28
+#define RFCOMM_FCOFF	0x18
+#define RFCOMM_MSC	0x38
+#define RFCOMM_RPN	0x24
+#define RFCOMM_RLS	0x14
+#define RFCOMM_PN	0x20
+#define RFCOMM_NSC	0x04
+
+#define RFCOMM_V24_FC	0x02
+#define RFCOMM_V24_RTC	0x04
+#define RFCOMM_V24_RTR	0x08
+#define RFCOMM_V24_IC	0x40
+#define RFCOMM_V24_DV	0x80
+
+#define RFCOMM_RPN_BR_2400	0x0
+#define RFCOMM_RPN_BR_4800	0x1
+#define RFCOMM_RPN_BR_7200	0x2
+#define RFCOMM_RPN_BR_9600	0x3
+#define RFCOMM_RPN_BR_19200	0x4
+#define RFCOMM_RPN_BR_38400	0x5
+#define RFCOMM_RPN_BR_57600	0x6
+#define RFCOMM_RPN_BR_115200	0x7
+#define RFCOMM_RPN_BR_230400	0x8
+
+#define RFCOMM_RPN_DATA_5	0x0
+#define RFCOMM_RPN_DATA_6	0x1
+#define RFCOMM_RPN_DATA_7	0x2
+#define RFCOMM_RPN_DATA_8	0x3
+
+#define RFCOMM_RPN_STOP_1	0
+#define RFCOMM_RPN_STOP_15	1
+
+#define RFCOMM_RPN_PARITY_NONE	0x0
+#define RFCOMM_RPN_PARITY_ODD	0x1
+#define RFCOMM_RPN_PARITY_EVEN	0x3
+#define RFCOMM_RPN_PARITY_MARK	0x5
+#define RFCOMM_RPN_PARITY_SPACE	0x7
+
+#define RFCOMM_RPN_FLOW_NONE	0x00
+
+#define RFCOMM_RPN_XON_CHAR	0x11
+#define RFCOMM_RPN_XOFF_CHAR	0x13
+
+#define RFCOMM_RPN_PM_BITRATE		0x0001
+#define RFCOMM_RPN_PM_DATA		0x0002
+#define RFCOMM_RPN_PM_STOP		0x0004
+#define RFCOMM_RPN_PM_PARITY		0x0008
+#define RFCOMM_RPN_PM_PARITY_TYPE	0x0010
+#define RFCOMM_RPN_PM_XON		0x0020
+#define RFCOMM_RPN_PM_XOFF		0x0040
+#define RFCOMM_RPN_PM_FLOW		0x3F00
+
+#define RFCOMM_RPN_PM_ALL		0x3F7F
+
+struct rfcomm_hdr {
+	u8 addr;
+	u8 ctrl;
+	u8 len;    /* Actual size can be 2 bytes */
+} __packed;
+
+struct rfcomm_cmd {
+	u8 addr;
+	u8 ctrl;
+	u8 len;
+	u8 fcs;
+} __packed;
+
+struct rfcomm_mcc {
+	u8 type;
+	u8 len;
+} __packed;
+
+struct rfcomm_pn {
+	u8  dlci;
+	u8  flow_ctrl;
+	u8  priority;
+	u8  ack_timer;
+	__le16 mtu;
+	u8  max_retrans;
+	u8  credits;
+} __packed;
+
+struct rfcomm_rpn {
+	u8  dlci;
+	u8  bit_rate;
+	u8  line_settings;
+	u8  flow_ctrl;
+	u8  xon_char;
+	u8  xoff_char;
+	__le16 param_mask;
+} __packed;
+
+struct rfcomm_rls {
+	u8  dlci;
+	u8  status;
+} __packed;
+
+struct rfcomm_msc {
+	u8  dlci;
+	u8  v24_sig;
+} __packed;
+
+/* ---- Core structures, flags etc ---- */
+
+struct rfcomm_session {
+	struct list_head list;
+	struct socket   *sock;
+	struct timer_list timer;
+	unsigned long    state;
+	unsigned long    flags;
+	atomic_t         refcnt;
+	int              initiator;
+
+	/* Default DLC parameters */
+	int    cfc;
+	uint   mtu;
+
+	struct list_head dlcs;
+};
+
+struct rfcomm_dlc {
+	struct list_head      list;
+	struct rfcomm_session *session;
+	struct sk_buff_head   tx_queue;
+	struct timer_list     timer;
+
+	spinlock_t    lock;
+	unsigned long state;
+	unsigned long flags;
+	atomic_t      refcnt;
+	u8            dlci;
+	u8            addr;
+	u8            priority;
+	u8            v24_sig;
+	u8            remote_v24_sig;
+	u8            mscex;
+	u8            out;
+	u8            sec_level;
+	u8            role_switch;
+	u32           defer_setup;
+
+	uint          mtu;
+	uint          cfc;
+	uint          rx_credits;
+	uint          tx_credits;
+
+	void          *owner;
+
+	void (*data_ready)(struct rfcomm_dlc *d, struct sk_buff *skb);
+	void (*state_change)(struct rfcomm_dlc *d, int err);
+	void (*modem_status)(struct rfcomm_dlc *d, u8 v24_sig);
+};
+
+/* DLC and session flags */
+#define RFCOMM_RX_THROTTLED 0
+#define RFCOMM_TX_THROTTLED 1
+#define RFCOMM_TIMED_OUT    2
+#define RFCOMM_MSC_PENDING  3
+#define RFCOMM_SEC_PENDING  4
+#define RFCOMM_AUTH_PENDING 5
+#define RFCOMM_AUTH_ACCEPT  6
+#define RFCOMM_AUTH_REJECT  7
+#define RFCOMM_DEFER_SETUP  8
+#define RFCOMM_ENC_DROP     9
+
+/* Scheduling flags and events */
+#define RFCOMM_SCHED_WAKEUP 31
+
+/* MSC exchange flags */
+#define RFCOMM_MSCEX_TX     1
+#define RFCOMM_MSCEX_RX     2
+#define RFCOMM_MSCEX_OK     (RFCOMM_MSCEX_TX + RFCOMM_MSCEX_RX)
+
+/* CFC states */
+#define RFCOMM_CFC_UNKNOWN  -1
+#define RFCOMM_CFC_DISABLED 0
+#define RFCOMM_CFC_ENABLED  RFCOMM_MAX_CREDITS
+
+/* ---- RFCOMM SEND RPN ---- */
+int rfcomm_send_rpn(struct rfcomm_session *s, int cr, u8 dlci,
+			u8 bit_rate, u8 data_bits, u8 stop_bits,
+			u8 parity, u8 flow_ctrl_settings,
+			u8 xon_char, u8 xoff_char, u16 param_mask);
+
+/* ---- RFCOMM DLCs (channels) ---- */
+struct rfcomm_dlc *rfcomm_dlc_alloc(gfp_t prio);
+void rfcomm_dlc_free(struct rfcomm_dlc *d);
+int  rfcomm_dlc_open(struct rfcomm_dlc *d, bdaddr_t *src, bdaddr_t *dst,
+								u8 channel);
+int  rfcomm_dlc_close(struct rfcomm_dlc *d, int reason);
+int  rfcomm_dlc_send(struct rfcomm_dlc *d, struct sk_buff *skb);
+int  rfcomm_dlc_set_modem_status(struct rfcomm_dlc *d, u8 v24_sig);
+int  rfcomm_dlc_get_modem_status(struct rfcomm_dlc *d, u8 *v24_sig);
+void rfcomm_dlc_accept(struct rfcomm_dlc *d);
+
+#define rfcomm_dlc_lock(d)     spin_lock(&d->lock)
+#define rfcomm_dlc_unlock(d)   spin_unlock(&d->lock)
+
+static inline void rfcomm_dlc_hold(struct rfcomm_dlc *d)
+{
+	atomic_inc(&d->refcnt);
+}
+
+static inline void rfcomm_dlc_put(struct rfcomm_dlc *d)
+{
+	if (atomic_dec_and_test(&d->refcnt))
+		rfcomm_dlc_free(d);
+}
+
+extern void __rfcomm_dlc_throttle(struct rfcomm_dlc *d);
+extern void __rfcomm_dlc_unthrottle(struct rfcomm_dlc *d);
+
+static inline void rfcomm_dlc_throttle(struct rfcomm_dlc *d)
+{
+	if (!test_and_set_bit(RFCOMM_RX_THROTTLED, &d->flags))
+		__rfcomm_dlc_throttle(d);
+}
+
+static inline void rfcomm_dlc_unthrottle(struct rfcomm_dlc *d)
+{
+	if (test_and_clear_bit(RFCOMM_RX_THROTTLED, &d->flags))
+		__rfcomm_dlc_unthrottle(d);
+}
+
+/* ---- RFCOMM sessions ---- */
+void   rfcomm_session_getaddr(struct rfcomm_session *s, bdaddr_t *src,
+								bdaddr_t *dst);
+
+static inline void rfcomm_session_hold(struct rfcomm_session *s)
+{
+	atomic_inc(&s->refcnt);
+}
+
+/* ---- RFCOMM sockets ---- */
+struct sockaddr_rc {
+	sa_family_t	rc_family;
+	bdaddr_t	rc_bdaddr;
+	u8		rc_channel;
+};
+
+#define RFCOMM_CONNINFO	0x02
+struct rfcomm_conninfo {
+	__u16 hci_handle;
+	__u8  dev_class[3];
+};
+
+#define RFCOMM_LM	0x03
+#define RFCOMM_LM_MASTER	0x0001
+#define RFCOMM_LM_AUTH		0x0002
+#define RFCOMM_LM_ENCRYPT	0x0004
+#define RFCOMM_LM_TRUSTED	0x0008
+#define RFCOMM_LM_RELIABLE	0x0010
+#define RFCOMM_LM_SECURE	0x0020
+
+#define rfcomm_pi(sk) ((struct rfcomm_pinfo *) sk)
+
+struct rfcomm_pinfo {
+	struct bt_sock bt;
+	struct rfcomm_dlc   *dlc;
+	u8     channel;
+	u8     sec_level;
+	u8     role_switch;
+};
+
+int  rfcomm_init_sockets(void);
+void rfcomm_cleanup_sockets(void);
+
+int  rfcomm_connect_ind(struct rfcomm_session *s, u8 channel,
+							struct rfcomm_dlc **d);
+
+/* ---- RFCOMM TTY ---- */
+#define RFCOMM_MAX_DEV  256
+
+#define RFCOMMCREATEDEV		_IOW('R', 200, int)
+#define RFCOMMRELEASEDEV	_IOW('R', 201, int)
+#define RFCOMMGETDEVLIST	_IOR('R', 210, int)
+#define RFCOMMGETDEVINFO	_IOR('R', 211, int)
+#define RFCOMMSTEALDLC		_IOW('R', 220, int)
+
+#define RFCOMM_REUSE_DLC      0
+#define RFCOMM_RELEASE_ONHUP  1
+#define RFCOMM_HANGUP_NOW     2
+#define RFCOMM_TTY_ATTACHED   3
+#define RFCOMM_TTY_RELEASED   4
+
+struct rfcomm_dev_req {
+	s16      dev_id;
+	u32      flags;
+	bdaddr_t src;
+	bdaddr_t dst;
+	u8       channel;
+};
+
+struct rfcomm_dev_info {
+	s16      id;
+	u32      flags;
+	u16      state;
+	bdaddr_t src;
+	bdaddr_t dst;
+	u8       channel;
+};
+
+struct rfcomm_dev_list_req {
+	u16      dev_num;
+	struct   rfcomm_dev_info dev_info[0];
+};
+
+int  rfcomm_dev_ioctl(struct sock *sk, unsigned int cmd, void __user *arg);
+
+#ifdef CONFIG_BT_RFCOMM_TTY
+int  rfcomm_init_ttys(void);
+void rfcomm_cleanup_ttys(void);
+#else
+static inline int rfcomm_init_ttys(void)
+{
+	return 0;
+}
+static inline void rfcomm_cleanup_ttys(void)
+{
+}
+#endif
+#endif /* __RFCOMM_H */
diff --git a/include/net/bluetooth/sco.h b/include/net/bluetooth/sco.h
new file mode 100644
index 00000000..6d1857ab
--- /dev/null
+++ b/include/net/bluetooth/sco.h
@@ -0,0 +1,81 @@
+/*
+   BlueZ - Bluetooth protocol stack for Linux
+   Copyright (C) 2000-2001 Qualcomm Incorporated
+
+   Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License version 2 as
+   published by the Free Software Foundation;
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
+   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
+   SOFTWARE IS DISCLAIMED.
+*/
+
+#ifndef __SCO_H
+#define __SCO_H
+
+/* SCO defaults */
+#define SCO_DEFAULT_MTU		500
+#define SCO_DEFAULT_FLUSH_TO	0xFFFF
+
+#define SCO_CONN_TIMEOUT	(HZ * 40)
+#define SCO_DISCONN_TIMEOUT	(HZ * 2)
+#define SCO_CONN_IDLE_TIMEOUT	(HZ * 60)
+
+/* SCO socket address */
+struct sockaddr_sco {
+	sa_family_t	sco_family;
+	bdaddr_t	sco_bdaddr;
+	__u16		sco_pkt_type;
+};
+
+/* SCO socket options */
+#define SCO_OPTIONS	0x01
+struct sco_options {
+	__u16 mtu;
+};
+
+#define SCO_CONNINFO	0x02
+struct sco_conninfo {
+	__u16 hci_handle;
+	__u8  dev_class[3];
+};
+
+/* ---- SCO connections ---- */
+struct sco_conn {
+	struct hci_conn	*hcon;
+
+	bdaddr_t	*dst;
+	bdaddr_t	*src;
+
+	spinlock_t	lock;
+	struct sock	*sk;
+
+	unsigned int    mtu;
+};
+
+#define sco_conn_lock(c)	spin_lock(&c->lock);
+#define sco_conn_unlock(c)	spin_unlock(&c->lock);
+
+/* ----- SCO socket info ----- */
+#define sco_pi(sk) ((struct sco_pinfo *) sk)
+
+struct sco_pinfo {
+	struct bt_sock	bt;
+	__u16		pkt_type;
+
+	struct sco_conn	*conn;
+};
+
+#endif /* __SCO_H */
diff --git a/include/net/bluetooth/smp.h b/include/net/bluetooth/smp.h
new file mode 100644
index 00000000..7b3acdd2
--- /dev/null
+++ b/include/net/bluetooth/smp.h
@@ -0,0 +1,146 @@
+/*
+   BlueZ - Bluetooth protocol stack for Linux
+   Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License version 2 as
+   published by the Free Software Foundation;
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
+   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
+   SOFTWARE IS DISCLAIMED.
+*/
+
+#ifndef __SMP_H
+#define __SMP_H
+
+struct smp_command_hdr {
+	__u8	code;
+} __packed;
+
+#define SMP_CMD_PAIRING_REQ	0x01
+#define SMP_CMD_PAIRING_RSP	0x02
+struct smp_cmd_pairing {
+	__u8	io_capability;
+	__u8	oob_flag;
+	__u8	auth_req;
+	__u8	max_key_size;
+	__u8	init_key_dist;
+	__u8	resp_key_dist;
+} __packed;
+
+#define SMP_IO_DISPLAY_ONLY	0x00
+#define SMP_IO_DISPLAY_YESNO	0x01
+#define SMP_IO_KEYBOARD_ONLY	0x02
+#define SMP_IO_NO_INPUT_OUTPUT	0x03
+#define SMP_IO_KEYBOARD_DISPLAY	0x04
+
+#define SMP_OOB_NOT_PRESENT	0x00
+#define SMP_OOB_PRESENT		0x01
+
+#define SMP_DIST_ENC_KEY	0x01
+#define SMP_DIST_ID_KEY		0x02
+#define SMP_DIST_SIGN		0x04
+
+#define SMP_AUTH_NONE		0x00
+#define SMP_AUTH_BONDING	0x01
+#define SMP_AUTH_MITM		0x04
+
+#define SMP_CMD_PAIRING_CONFIRM	0x03
+struct smp_cmd_pairing_confirm {
+	__u8	confirm_val[16];
+} __packed;
+
+#define SMP_CMD_PAIRING_RANDOM	0x04
+struct smp_cmd_pairing_random {
+	__u8	rand_val[16];
+} __packed;
+
+#define SMP_CMD_PAIRING_FAIL	0x05
+struct smp_cmd_pairing_fail {
+	__u8	reason;
+} __packed;
+
+#define SMP_CMD_ENCRYPT_INFO	0x06
+struct smp_cmd_encrypt_info {
+	__u8	ltk[16];
+} __packed;
+
+#define SMP_CMD_MASTER_IDENT	0x07
+struct smp_cmd_master_ident {
+	__u16	ediv;
+	__u8	rand[8];
+} __packed;
+
+#define SMP_CMD_IDENT_INFO	0x08
+struct smp_cmd_ident_info {
+	__u8	irk[16];
+} __packed;
+
+#define SMP_CMD_IDENT_ADDR_INFO	0x09
+struct smp_cmd_ident_addr_info {
+	__u8	addr_type;
+	bdaddr_t bdaddr;
+} __packed;
+
+#define SMP_CMD_SIGN_INFO	0x0a
+struct smp_cmd_sign_info {
+	__u8	csrk[16];
+} __packed;
+
+#define SMP_CMD_SECURITY_REQ	0x0b
+struct smp_cmd_security_req {
+	__u8	auth_req;
+} __packed;
+
+#define SMP_PASSKEY_ENTRY_FAILED	0x01
+#define SMP_OOB_NOT_AVAIL		0x02
+#define SMP_AUTH_REQUIREMENTS		0x03
+#define SMP_CONFIRM_FAILED		0x04
+#define SMP_PAIRING_NOTSUPP		0x05
+#define SMP_ENC_KEY_SIZE		0x06
+#define SMP_CMD_NOTSUPP		0x07
+#define SMP_UNSPECIFIED		0x08
+#define SMP_REPEATED_ATTEMPTS		0x09
+
+#define SMP_MIN_ENC_KEY_SIZE		7
+#define SMP_MAX_ENC_KEY_SIZE		16
+
+#define SMP_FLAG_TK_VALID	1
+#define SMP_FLAG_CFM_PENDING	2
+#define SMP_FLAG_MITM_AUTH	3
+
+struct smp_chan {
+	struct l2cap_conn *conn;
+	u8		preq[7]; /* SMP Pairing Request */
+	u8		prsp[7]; /* SMP Pairing Response */
+	u8              prnd[16]; /* SMP Pairing Random (local) */
+	u8              rrnd[16]; /* SMP Pairing Random (remote) */
+	u8		pcnf[16]; /* SMP Pairing Confirm */
+	u8		tk[16]; /* SMP Temporary Key */
+	u8		enc_key_size;
+	unsigned long	smp_flags;
+	struct crypto_blkcipher	*tfm;
+	struct work_struct confirm;
+	struct work_struct random;
+
+};
+
+/* SMP Commands */
+int smp_conn_security(struct l2cap_conn *conn, __u8 sec_level);
+int smp_sig_channel(struct l2cap_conn *conn, struct sk_buff *skb);
+int smp_distribute_keys(struct l2cap_conn *conn, __u8 force);
+int smp_user_confirm_reply(struct hci_conn *conn, u16 mgmt_op, __le32 passkey);
+
+void smp_chan_destroy(struct l2cap_conn *conn);
+
+#endif /* __SMP_H */
diff --git a/include/net/caif/caif_dev.h b/include/net/caif/caif_dev.h
new file mode 100644
index 00000000..ef2dd943
--- /dev/null
+++ b/include/net/caif/caif_dev.h
@@ -0,0 +1,128 @@
+/*
+ * Copyright (C) ST-Ericsson AB 2010
+ * Author:	Sjur Brendeland/ sjur.brandeland@stericsson.com
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef CAIF_DEV_H_
+#define CAIF_DEV_H_
+
+#include <net/caif/caif_layer.h>
+#include <net/caif/cfcnfg.h>
+#include <net/caif/caif_device.h>
+#include <linux/caif/caif_socket.h>
+#include <linux/if.h>
+#include <linux/net.h>
+
+/**
+ * struct caif_param - CAIF parameters.
+ * @size:	Length of data
+ * @data:	Binary Data Blob
+ */
+struct caif_param {
+	u16  size;
+	u8   data[256];
+};
+
+/**
+ * struct caif_connect_request - Request data for CAIF channel setup.
+ * @protocol:		Type of CAIF protocol to use (at, datagram etc)
+ * @sockaddr:		Socket address to connect.
+ * @priority:		Priority of the connection.
+ * @link_selector:	Link selector (high bandwidth or low latency)
+ * @ifindex:		kernel index of the interface.
+ * @param:		Connect Request parameters (CAIF_SO_REQ_PARAM).
+ *
+ * This struct is used when connecting a CAIF channel.
+ * It contains all CAIF channel configuration options.
+ */
+struct caif_connect_request {
+	enum caif_protocol_type protocol;
+	struct sockaddr_caif sockaddr;
+	enum caif_channel_priority priority;
+	enum caif_link_selector link_selector;
+	int ifindex;
+	struct caif_param param;
+};
+
+/**
+ * caif_connect_client - Connect a client to CAIF Core Stack.
+ * @config:		Channel setup parameters, specifying what address
+ *			to connect on the Modem.
+ * @client_layer:	User implementation of client layer. This layer
+ *			MUST have receive and control callback functions
+ *			implemented.
+ * @ifindex:		Link layer interface index used for this connection.
+ * @headroom:		Head room needed by CAIF protocol.
+ * @tailroom:		Tail room needed by CAIF protocol.
+ *
+ * This function connects a CAIF channel. The Client must implement
+ * the struct cflayer. This layer represents the Client layer and holds
+ * receive functions and control callback functions. Control callback
+ * function will receive information about connect/disconnect responses,
+ * flow control etc (see enum caif_control).
+ * E.g. CAIF Socket will call this function for each socket it connects
+ * and have one client_layer instance for each socket.
+ */
+int caif_connect_client(struct net *net,
+			struct caif_connect_request *conn_req,
+			struct cflayer *client_layer, int *ifindex,
+			int *headroom, int *tailroom);
+
+/**
+ * caif_disconnect_client - Disconnects a client from the CAIF stack.
+ *
+ * @client_layer: Client layer to be disconnected.
+ */
+int caif_disconnect_client(struct net *net, struct cflayer *client_layer);
+
+
+/**
+ * caif_client_register_refcnt - register ref-count functions provided by client.
+ *
+ * @adapt_layer: Client layer using CAIF Stack.
+ * @hold:	Function provided by client layer increasing ref-count
+ * @put:	Function provided by client layer decreasing ref-count
+ *
+ * Client of the CAIF Stack must register functions for reference counting.
+ * These functions are called by the CAIF Stack for every upstream packet,
+ * and must therefore be implemented efficiently.
+ *
+ * Client should call caif_free_client when reference count degrease to zero.
+ */
+
+void caif_client_register_refcnt(struct cflayer *adapt_layer,
+					void (*hold)(struct cflayer *lyr),
+					void (*put)(struct cflayer *lyr));
+/**
+ * caif_free_client - Free memory used to manage the client in the CAIF Stack.
+ *
+ * @client_layer: Client layer to be removed.
+ *
+ * This function must be called from client layer in order to free memory.
+ * Caller must guarantee that no packets are in flight upstream when calling
+ * this function.
+ */
+void caif_free_client(struct cflayer *adap_layer);
+
+/**
+ * struct caif_enroll_dev - Enroll a net-device as a CAIF Link layer
+ * @dev:		Network device to enroll.
+ * @caifdev:		Configuration information from CAIF Link Layer
+ * @link_support:	Link layer support layer
+ * @head_room:		Head room needed by link support layer
+ * @layer:		Lowest layer in CAIF stack
+ * @rcv_fun:		Receive function for CAIF stack.
+ *
+ * This function enroll a CAIF link layer into CAIF Stack and
+ * expects the interface to be able to handle CAIF payload.
+ * The link_support layer is used to add any Link Layer specific
+ * framing.
+ */
+void caif_enroll_dev(struct net_device *dev, struct caif_dev_common *caifdev,
+			struct cflayer *link_support, int head_room,
+			struct cflayer **layer, int (**rcv_func)(
+				struct sk_buff *, struct net_device *,
+				struct packet_type *, struct net_device *));
+
+#endif /* CAIF_DEV_H_ */
diff --git a/include/net/caif/caif_device.h b/include/net/caif/caif_device.h
new file mode 100644
index 00000000..d02f044a
--- /dev/null
+++ b/include/net/caif/caif_device.h
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) ST-Ericsson AB 2010
+ * Author:	Sjur Brendeland/ sjur.brandeland@stericsson.com
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef CAIF_DEVICE_H_
+#define CAIF_DEVICE_H_
+#include <linux/kernel.h>
+#include <linux/net.h>
+#include <linux/netdevice.h>
+#include <linux/caif/caif_socket.h>
+#include <net/caif/caif_device.h>
+
+/**
+ * struct caif_dev_common - data shared between CAIF drivers and stack.
+ * @flowctrl:		Flow Control callback function. This function is
+ *                      supplied by CAIF Core Stack and is used by CAIF
+ *                      Link Layer to send flow-stop to CAIF Core.
+ *                      The flow information will be distributed to all
+ *                      clients of CAIF.
+ *
+ * @link_select:	Profile of device, either high-bandwidth or
+ *			low-latency. This member is set by CAIF Link
+ *			Layer Device in	order to indicate if this device
+ *			is a high bandwidth or low latency device.
+ *
+ * @use_frag:		CAIF Frames may be fragmented.
+ *			Is set by CAIF Link Layer in order to indicate if the
+ *			interface receives fragmented frames that must be
+ *			assembled by CAIF Core Layer.
+ *
+ * @use_fcs:		Indicate if Frame CheckSum (fcs) is used.
+ *			Is set if the physical interface is
+ *			using Frame Checksum on the CAIF Frames.
+ *
+ * @use_stx:		Indicate STart of frame eXtension (stx) in use.
+ *			Is set if the CAIF Link Layer expects
+ *			CAIF Frames to start with the STX byte.
+ *
+ * This structure is shared between the CAIF drivers and the CAIF stack.
+ * It is used by the device to register its behavior.
+ * CAIF Core layer must set the member flowctrl in order to supply
+ * CAIF Link Layer with the flow control function.
+ *
+ */
+ struct caif_dev_common {
+	void (*flowctrl)(struct net_device *net, int on);
+	enum caif_link_selector link_select;
+	int use_frag;
+	int use_fcs;
+	int use_stx;
+};
+
+#endif	/* CAIF_DEVICE_H_ */
diff --git a/include/net/caif/caif_hsi.h b/include/net/caif/caif_hsi.h
new file mode 100644
index 00000000..6db8ecf5
--- /dev/null
+++ b/include/net/caif/caif_hsi.h
@@ -0,0 +1,161 @@
+/*
+ * Copyright (C) ST-Ericsson AB 2010
+ * Contact: Sjur Brendeland / sjur.brandeland@stericsson.com
+ * Author:  Daniel Martensson / daniel.martensson@stericsson.com
+ *	    Dmitry.Tarnyagin  / dmitry.tarnyagin@stericsson.com
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef CAIF_HSI_H_
+#define CAIF_HSI_H_
+
+#include <net/caif/caif_layer.h>
+#include <net/caif/caif_device.h>
+#include <linux/atomic.h>
+
+/*
+ * Maximum number of CAIF frames that can reside in the same HSI frame.
+ */
+#define CFHSI_MAX_PKTS 15
+
+/*
+ * Maximum number of bytes used for the frame that can be embedded in the
+ * HSI descriptor.
+ */
+#define CFHSI_MAX_EMB_FRM_SZ 96
+
+/*
+ * Decides if HSI buffers should be prefilled with 0xFF pattern for easier
+ * debugging. Both TX and RX buffers will be filled before the transfer.
+ */
+#define CFHSI_DBG_PREFILL		0
+
+/* Structure describing a HSI packet descriptor. */
+#pragma pack(1) /* Byte alignment. */
+struct cfhsi_desc {
+	u8 header;
+	u8 offset;
+	u16 cffrm_len[CFHSI_MAX_PKTS];
+	u8 emb_frm[CFHSI_MAX_EMB_FRM_SZ];
+};
+#pragma pack() /* Default alignment. */
+
+/* Size of the complete HSI packet descriptor. */
+#define CFHSI_DESC_SZ (sizeof(struct cfhsi_desc))
+
+/*
+ * Size of the complete HSI packet descriptor excluding the optional embedded
+ * CAIF frame.
+ */
+#define CFHSI_DESC_SHORT_SZ (CFHSI_DESC_SZ - CFHSI_MAX_EMB_FRM_SZ)
+
+/*
+ * Maximum bytes transferred in one transfer.
+ */
+#define CFHSI_MAX_CAIF_FRAME_SZ 4096
+
+#define CFHSI_MAX_PAYLOAD_SZ (CFHSI_MAX_PKTS * CFHSI_MAX_CAIF_FRAME_SZ)
+
+/* Size of the complete HSI TX buffer. */
+#define CFHSI_BUF_SZ_TX (CFHSI_DESC_SZ + CFHSI_MAX_PAYLOAD_SZ)
+
+/* Size of the complete HSI RX buffer. */
+#define CFHSI_BUF_SZ_RX ((2 * CFHSI_DESC_SZ) + CFHSI_MAX_PAYLOAD_SZ)
+
+/* Bitmasks for the HSI descriptor. */
+#define CFHSI_PIGGY_DESC		(0x01 << 7)
+
+#define CFHSI_TX_STATE_IDLE			0
+#define CFHSI_TX_STATE_XFER			1
+
+#define CFHSI_RX_STATE_DESC			0
+#define CFHSI_RX_STATE_PAYLOAD			1
+
+/* Bitmasks for power management. */
+#define CFHSI_WAKE_UP				0
+#define CFHSI_WAKE_UP_ACK			1
+#define CFHSI_WAKE_DOWN_ACK			2
+#define CFHSI_AWAKE				3
+#define CFHSI_WAKELOCK_HELD			4
+#define CFHSI_SHUTDOWN				5
+#define CFHSI_FLUSH_FIFO			6
+
+#ifndef CFHSI_INACTIVITY_TOUT
+#define CFHSI_INACTIVITY_TOUT			(1 * HZ)
+#endif /* CFHSI_INACTIVITY_TOUT */
+
+#ifndef CFHSI_WAKE_TOUT
+#define CFHSI_WAKE_TOUT			(3 * HZ)
+#endif /* CFHSI_WAKE_TOUT */
+
+#ifndef CFHSI_MAX_RX_RETRIES
+#define CFHSI_MAX_RX_RETRIES		(10 * HZ)
+#endif
+
+/* Structure implemented by the CAIF HSI driver. */
+struct cfhsi_drv {
+	void (*tx_done_cb) (struct cfhsi_drv *drv);
+	void (*rx_done_cb) (struct cfhsi_drv *drv);
+	void (*wake_up_cb) (struct cfhsi_drv *drv);
+	void (*wake_down_cb) (struct cfhsi_drv *drv);
+};
+
+/* Structure implemented by HSI device. */
+struct cfhsi_dev {
+	int (*cfhsi_up) (struct cfhsi_dev *dev);
+	int (*cfhsi_down) (struct cfhsi_dev *dev);
+	int (*cfhsi_tx) (u8 *ptr, int len, struct cfhsi_dev *dev);
+	int (*cfhsi_rx) (u8 *ptr, int len, struct cfhsi_dev *dev);
+	int (*cfhsi_wake_up) (struct cfhsi_dev *dev);
+	int (*cfhsi_wake_down) (struct cfhsi_dev *dev);
+	int (*cfhsi_get_peer_wake) (struct cfhsi_dev *dev, bool *status);
+	int (*cfhsi_fifo_occupancy)(struct cfhsi_dev *dev, size_t *occupancy);
+	int (*cfhsi_rx_cancel)(struct cfhsi_dev *dev);
+	struct cfhsi_drv *drv;
+};
+
+/* Structure holds status of received CAIF frames processing */
+struct cfhsi_rx_state {
+	int state;
+	int nfrms;
+	int pld_len;
+	int retries;
+	bool piggy_desc;
+};
+
+/* Structure implemented by CAIF HSI drivers. */
+struct cfhsi {
+	struct caif_dev_common cfdev;
+	struct net_device *ndev;
+	struct platform_device *pdev;
+	struct sk_buff_head qhead;
+	struct cfhsi_drv drv;
+	struct cfhsi_dev *dev;
+	int tx_state;
+	struct cfhsi_rx_state rx_state;
+	unsigned long inactivity_timeout;
+	int rx_len;
+	u8 *rx_ptr;
+	u8 *tx_buf;
+	u8 *rx_buf;
+	u8 *rx_flip_buf;
+	spinlock_t lock;
+	int flow_off_sent;
+	u32 q_low_mark;
+	u32 q_high_mark;
+	struct list_head list;
+	struct work_struct wake_up_work;
+	struct work_struct wake_down_work;
+	struct work_struct out_of_sync_work;
+	struct workqueue_struct *wq;
+	wait_queue_head_t wake_up_wait;
+	wait_queue_head_t wake_down_wait;
+	wait_queue_head_t flush_fifo_wait;
+	struct timer_list timer;
+	struct timer_list rx_slowpath_timer;
+	unsigned long bits;
+};
+
+extern struct platform_driver cfhsi_driver;
+
+#endif		/* CAIF_HSI_H_ */
diff --git a/include/net/caif/caif_layer.h b/include/net/caif/caif_layer.h
new file mode 100644
index 00000000..0f3a3912
--- /dev/null
+++ b/include/net/caif/caif_layer.h
@@ -0,0 +1,279 @@
+/*
+ * Copyright (C) ST-Ericsson AB 2010
+ * Author:	Sjur Brendeland / sjur.brandeland@stericsson.com
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef CAIF_LAYER_H_
+#define CAIF_LAYER_H_
+
+#include <linux/list.h>
+
+struct cflayer;
+struct cfpkt;
+struct cfpktq;
+struct caif_payload_info;
+struct caif_packet_funcs;
+
+#define CAIF_LAYER_NAME_SZ 16
+
+/**
+ * caif_assert() - Assert function for CAIF.
+ * @assert: expression to evaluate.
+ *
+ * This function will print a error message and a do WARN_ON if the
+ * assertion failes. Normally this will do a stack up at the current location.
+ */
+#define caif_assert(assert)					\
+do {								\
+	if (!(assert)) {					\
+		pr_err("caif:Assert detected:'%s'\n", #assert); \
+		WARN_ON(!(assert));				\
+	}							\
+} while (0)
+
+/**
+ * enum caif_ctrlcmd - CAIF Stack Control Signaling sent in layer.ctrlcmd().
+ *
+ * @CAIF_CTRLCMD_FLOW_OFF_IND:		Flow Control is OFF, transmit function
+ *					should stop sending data
+ *
+ * @CAIF_CTRLCMD_FLOW_ON_IND:		Flow Control is ON, transmit function
+ *					can start sending data
+ *
+ * @CAIF_CTRLCMD_REMOTE_SHUTDOWN_IND:	Remote end modem has decided to close
+ *					down channel
+ *
+ * @CAIF_CTRLCMD_INIT_RSP:		Called initially when the layer below
+ *					has finished initialization
+ *
+ * @CAIF_CTRLCMD_DEINIT_RSP:		Called when de-initialization is
+ *					complete
+ *
+ * @CAIF_CTRLCMD_INIT_FAIL_RSP:		Called if initialization fails
+ *
+ * @_CAIF_CTRLCMD_PHYIF_FLOW_OFF_IND:	CAIF Link layer temporarily cannot
+ *					send more packets.
+ * @_CAIF_CTRLCMD_PHYIF_FLOW_ON_IND:	Called if CAIF Link layer is able
+ *					to send packets again.
+ * @_CAIF_CTRLCMD_PHYIF_DOWN_IND:	Called if CAIF Link layer is going
+ *					down.
+ *
+ * These commands are sent upwards in the CAIF stack to the CAIF Client.
+ * They are used for signaling originating from the modem or CAIF Link Layer.
+ * These are either responses (*_RSP) or events (*_IND).
+ */
+enum caif_ctrlcmd {
+	CAIF_CTRLCMD_FLOW_OFF_IND,
+	CAIF_CTRLCMD_FLOW_ON_IND,
+	CAIF_CTRLCMD_REMOTE_SHUTDOWN_IND,
+	CAIF_CTRLCMD_INIT_RSP,
+	CAIF_CTRLCMD_DEINIT_RSP,
+	CAIF_CTRLCMD_INIT_FAIL_RSP,
+	_CAIF_CTRLCMD_PHYIF_FLOW_OFF_IND,
+	_CAIF_CTRLCMD_PHYIF_FLOW_ON_IND,
+	_CAIF_CTRLCMD_PHYIF_DOWN_IND,
+};
+
+/**
+ * enum caif_modemcmd -	 Modem Control Signaling, sent from CAIF Client
+ *			 to the CAIF Link Layer or modem.
+ *
+ * @CAIF_MODEMCMD_FLOW_ON_REQ:		Flow Control is ON, transmit function
+ *					can start sending data.
+ *
+ * @CAIF_MODEMCMD_FLOW_OFF_REQ:		Flow Control is OFF, transmit function
+ *					should stop sending data.
+ *
+ * @_CAIF_MODEMCMD_PHYIF_USEFULL:	Notify physical layer that it is in use
+ *
+ * @_CAIF_MODEMCMD_PHYIF_USELESS:	Notify physical layer that it is
+ *					no longer in use.
+ *
+ * These are requests sent 'downwards' in the stack.
+ * Flow ON, OFF can be indicated to the modem.
+ */
+enum caif_modemcmd {
+	CAIF_MODEMCMD_FLOW_ON_REQ = 0,
+	CAIF_MODEMCMD_FLOW_OFF_REQ = 1,
+	_CAIF_MODEMCMD_PHYIF_USEFULL = 3,
+	_CAIF_MODEMCMD_PHYIF_USELESS = 4
+};
+
+/**
+ * enum caif_direction - CAIF Packet Direction.
+ * Indicate if a packet is to be sent out or to be received in.
+ * @CAIF_DIR_IN:		Incoming packet received.
+ * @CAIF_DIR_OUT:		Outgoing packet to be transmitted.
+ */
+enum caif_direction {
+	CAIF_DIR_IN = 0,
+	CAIF_DIR_OUT = 1
+};
+
+/**
+ * struct cflayer - CAIF Stack layer.
+ * Defines the framework for the CAIF Core Stack.
+ * @up:		Pointer up to the layer above.
+ * @dn:		Pointer down to the layer below.
+ * @node:	List node used when layer participate in a list.
+ * @receive:	Packet receive function.
+ * @transmit:	Packet transmit funciton.
+ * @ctrlcmd:	Used for control signalling upwards in the stack.
+ * @modemcmd:	Used for control signaling downwards in the stack.
+ * @id:		The identity of this layer
+ * @name:	Name of the layer.
+ *
+ *  This structure defines the layered structure in CAIF.
+ *
+ *  It defines CAIF layering structure, used by all CAIF Layers and the
+ *  layers interfacing CAIF.
+ *
+ *  In order to integrate with CAIF an adaptation layer on top of the CAIF stack
+ *  and PHY layer below the CAIF stack
+ *  must be implemented. These layer must follow the design principles below.
+ *
+ *  Principles for layering of protocol layers:
+ *    - All layers must use this structure. If embedding it, then place this
+ *	structure first in the layer specific structure.
+ *
+ *    - Each layer should not depend on any others layer's private data.
+ *
+ *    - In order to send data upwards do
+ *	layer->up->receive(layer->up, packet);
+ *
+ *    - In order to send data downwards do
+ *	layer->dn->transmit(layer->dn, info, packet);
+ */
+struct cflayer {
+	struct cflayer *up;
+	struct cflayer *dn;
+	struct list_head node;
+
+	/*
+	 *  receive() - Receive Function (non-blocking).
+	 *  Contract: Each layer must implement a receive function passing the
+	 *  CAIF packets upwards in the stack.
+	 *	Packet handling rules:
+	 *	      - The CAIF packet (cfpkt) ownership is passed to the
+	 *		called receive function. This means that the the
+	 *		packet cannot be accessed after passing it to the
+	 *		above layer using up->receive().
+	 *
+	 *	      - If parsing of the packet fails, the packet must be
+	 *		destroyed and negative error code returned
+	 *		from the function.
+	 *		EXCEPTION: If the framing layer (cffrml) returns
+	 *			-EILSEQ, the packet is not freed.
+	 *
+	 *	      - If parsing succeeds (and above layers return OK) then
+	 *		      the function must return a value >= 0.
+	 *
+	 *  Returns result < 0 indicates an error, 0 or positive value
+	 *	     indicates success.
+	 *
+	 *  @layr: Pointer to the current layer the receive function is
+	 *		implemented for (this pointer).
+	 *  @cfpkt: Pointer to CaifPacket to be handled.
+	 */
+	int (*receive)(struct cflayer *layr, struct cfpkt *cfpkt);
+
+	/*
+	 *  transmit() - Transmit Function (non-blocking).
+	 *  Contract: Each layer must implement a transmit function passing the
+	 *	CAIF packet downwards in the stack.
+	 *	Packet handling rules:
+	 *	      - The CAIF packet (cfpkt) ownership is passed to the
+	 *		transmit function. This means that the the packet
+	 *		cannot be accessed after passing it to the below
+	 *		layer using dn->transmit().
+	 *
+	 *	      - Upon error the packet ownership is still passed on,
+	 *		so the packet shall be freed where error is detected.
+	 *		Callers of the transmit function shall not free packets,
+	 *		but errors shall be returned.
+	 *
+	 *	      - Return value less than zero means error, zero or
+	 *		greater than zero means OK.
+	 *
+	 *  Returns result < 0 indicates an error, 0 or positive value
+	 *		indicates success.
+	 *
+	 *  @layr:	Pointer to the current layer the receive function
+	 *		isimplemented for (this pointer).
+	 *  @cfpkt:	 Pointer to CaifPacket to be handled.
+	 */
+	int (*transmit) (struct cflayer *layr, struct cfpkt *cfpkt);
+
+	/*
+	 *  cttrlcmd() - Control Function upwards in CAIF Stack  (non-blocking).
+	 *  Used for signaling responses (CAIF_CTRLCMD_*_RSP)
+	 *  and asynchronous events from the modem  (CAIF_CTRLCMD_*_IND)
+	 *
+	 *  @layr:	Pointer to the current layer the receive function
+	 *		is implemented for (this pointer).
+	 *  @ctrl:	Control Command.
+	 */
+	void (*ctrlcmd) (struct cflayer *layr, enum caif_ctrlcmd ctrl,
+			 int phyid);
+
+	/*
+	 *  modemctrl() - Control Function used for controlling the modem.
+	 *  Used to signal down-wards in the CAIF stack.
+	 *  Returns 0 on success, < 0 upon failure.
+	 *
+	 *  @layr:	Pointer to the current layer the receive function
+	 *		is implemented for (this pointer).
+	 *  @ctrl:  Control Command.
+	 */
+	int (*modemcmd) (struct cflayer *layr, enum caif_modemcmd ctrl);
+
+	unsigned int id;
+	char name[CAIF_LAYER_NAME_SZ];
+};
+
+/**
+ * layer_set_up() - Set the up pointer for a specified layer.
+ *  @layr: Layer where up pointer shall be set.
+ *  @above: Layer above.
+ */
+#define layer_set_up(layr, above) ((layr)->up = (struct cflayer *)(above))
+
+/**
+ *  layer_set_dn() - Set the down pointer for a specified layer.
+ *  @layr:  Layer where down pointer shall be set.
+ *  @below: Layer below.
+ */
+#define layer_set_dn(layr, below) ((layr)->dn = (struct cflayer *)(below))
+
+/**
+ * struct dev_info - Physical Device info information about physical layer.
+ * @dev:	Pointer to native physical device.
+ * @id:		Physical ID of the physical connection used by the
+ *		logical CAIF connection. Used by service layers to
+ *		identify their physical id to Caif MUX (CFMUXL)so
+ *		that the MUX can add the correct physical ID to the
+ *		packet.
+ */
+struct dev_info {
+	void *dev;
+	unsigned int id;
+};
+
+/**
+ * struct caif_payload_info - Payload information embedded in packet (sk_buff).
+ *
+ * @dev_info:	Information about the receiving device.
+ *
+ * @hdr_len:	Header length, used to align pay load on 32bit boundary.
+ *
+ * @channel_id: Channel ID of the logical CAIF connection.
+ *		Used by mux to insert channel id into the caif packet.
+ */
+struct caif_payload_info {
+	struct dev_info *dev_info;
+	unsigned short hdr_len;
+	unsigned short channel_id;
+};
+
+#endif	/* CAIF_LAYER_H_ */
diff --git a/include/net/caif/caif_shm.h b/include/net/caif/caif_shm.h
new file mode 100644
index 00000000..5bcce554
--- /dev/null
+++ b/include/net/caif/caif_shm.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) ST-Ericsson AB 2010
+ * Contact: Sjur Brendeland / sjur.brandeland@stericsson.com
+ * Author: Amarnath Revanna / amarnath.bangalore.revanna@stericsson.com
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef CAIF_SHM_H_
+#define CAIF_SHM_H_
+
+struct shmdev_layer {
+	u32 shm_base_addr;
+	u32 shm_total_sz;
+	u32 shm_id;
+	u32 shm_loopback;
+	void *hmbx;
+	int (*pshmdev_mbxsend) (u32 shm_id, u32 mbx_msg);
+	int (*pshmdev_mbxsetup) (void *pshmdrv_cb,
+				struct shmdev_layer *pshm_dev, void *pshm_drv);
+	struct net_device *pshm_netdev;
+};
+
+extern int caif_shmcore_probe(struct shmdev_layer *pshm_dev);
+extern void caif_shmcore_remove(struct net_device *pshm_netdev);
+
+#endif
diff --git a/include/net/caif/caif_spi.h b/include/net/caif/caif_spi.h
new file mode 100644
index 00000000..aa6a485b
--- /dev/null
+++ b/include/net/caif/caif_spi.h
@@ -0,0 +1,155 @@
+/*
+ * Copyright (C) ST-Ericsson AB 2010
+ * Author:	Daniel Martensson / Daniel.Martensson@stericsson.com
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef CAIF_SPI_H_
+#define CAIF_SPI_H_
+
+#include <net/caif/caif_device.h>
+
+#define SPI_CMD_WR			0x00
+#define SPI_CMD_RD			0x01
+#define SPI_CMD_EOT			0x02
+#define SPI_CMD_IND			0x04
+
+#define SPI_DMA_BUF_LEN			8192
+
+#define WL_SZ				2	/* 16 bits. */
+#define SPI_CMD_SZ			4	/* 32 bits. */
+#define SPI_IND_SZ			4	/* 32 bits. */
+
+#define SPI_XFER			0
+#define SPI_SS_ON			1
+#define SPI_SS_OFF			2
+#define SPI_TERMINATE			3
+
+/* Minimum time between different levels is 50 microseconds. */
+#define MIN_TRANSITION_TIME_USEC	50
+
+/* Defines for calculating duration of SPI transfers for a particular
+ * number of bytes.
+ */
+#define SPI_MASTER_CLK_MHZ		13
+#define SPI_XFER_TIME_USEC(bytes, clk) (((bytes) * 8) / clk)
+
+/* Normally this should be aligned on the modem in order to benefit from full
+ * duplex transfers. However a size of 8188 provokes errors when running with
+ * the modem. These errors occur when packet sizes approaches 4 kB of data.
+ */
+#define CAIF_MAX_SPI_FRAME 4092
+
+/* Maximum number of uplink CAIF frames that can reside in the same SPI frame.
+ * This number should correspond with the modem setting. The application side
+ * CAIF accepts any number of embedded downlink CAIF frames.
+ */
+#define CAIF_MAX_SPI_PKTS 9
+
+/* Decides if SPI buffers should be prefilled with 0xFF pattern for easier
+ * debugging. Both TX and RX buffers will be filled before the transfer.
+ */
+#define CFSPI_DBG_PREFILL		0
+
+/* Structure describing a SPI transfer. */
+struct cfspi_xfer {
+	u16 tx_dma_len;
+	u16 rx_dma_len;
+	void *va_tx[2];
+	dma_addr_t pa_tx[2];
+	void *va_rx;
+	dma_addr_t pa_rx;
+};
+
+/* Structure implemented by the SPI interface. */
+struct cfspi_ifc {
+	void (*ss_cb) (bool assert, struct cfspi_ifc *ifc);
+	void (*xfer_done_cb) (struct cfspi_ifc *ifc);
+	void *priv;
+};
+
+/* Structure implemented by SPI clients. */
+struct cfspi_dev {
+	int (*init_xfer) (struct cfspi_xfer *xfer, struct cfspi_dev *dev);
+	void (*sig_xfer) (bool xfer, struct cfspi_dev *dev);
+	struct cfspi_ifc *ifc;
+	char *name;
+	u32 clk_mhz;
+	void *priv;
+};
+
+/* Enumeration describing the CAIF SPI state. */
+enum cfspi_state {
+	CFSPI_STATE_WAITING = 0,
+	CFSPI_STATE_AWAKE,
+	CFSPI_STATE_FETCH_PKT,
+	CFSPI_STATE_GET_NEXT,
+	CFSPI_STATE_INIT_XFER,
+	CFSPI_STATE_WAIT_ACTIVE,
+	CFSPI_STATE_SIG_ACTIVE,
+	CFSPI_STATE_WAIT_XFER_DONE,
+	CFSPI_STATE_XFER_DONE,
+	CFSPI_STATE_WAIT_INACTIVE,
+	CFSPI_STATE_SIG_INACTIVE,
+	CFSPI_STATE_DELIVER_PKT,
+	CFSPI_STATE_MAX,
+};
+
+/* Structure implemented by SPI physical interfaces. */
+struct cfspi {
+	struct caif_dev_common cfdev;
+	struct net_device *ndev;
+	struct platform_device *pdev;
+	struct sk_buff_head qhead;
+	struct sk_buff_head chead;
+	u16 cmd;
+	u16 tx_cpck_len;
+	u16 tx_npck_len;
+	u16 rx_cpck_len;
+	u16 rx_npck_len;
+	struct cfspi_ifc ifc;
+	struct cfspi_xfer xfer;
+	struct cfspi_dev *dev;
+	unsigned long state;
+	struct work_struct work;
+	struct workqueue_struct *wq;
+	struct list_head list;
+	int    flow_off_sent;
+	u32 qd_low_mark;
+	u32 qd_high_mark;
+	struct completion comp;
+	wait_queue_head_t wait;
+	spinlock_t lock;
+	bool flow_stop;
+	bool slave;
+	bool slave_talked;
+#ifdef CONFIG_DEBUG_FS
+	enum cfspi_state dbg_state;
+	u16 pcmd;
+	u16 tx_ppck_len;
+	u16 rx_ppck_len;
+	struct dentry *dbgfs_dir;
+	struct dentry *dbgfs_state;
+	struct dentry *dbgfs_frame;
+#endif				/* CONFIG_DEBUG_FS */
+};
+
+extern int spi_frm_align;
+extern int spi_up_head_align;
+extern int spi_up_tail_align;
+extern int spi_down_head_align;
+extern int spi_down_tail_align;
+extern struct platform_driver cfspi_spi_driver;
+
+void cfspi_dbg_state(struct cfspi *cfspi, int state);
+int cfspi_xmitfrm(struct cfspi *cfspi, u8 *buf, size_t len);
+int cfspi_xmitlen(struct cfspi *cfspi);
+int cfspi_rxfrm(struct cfspi *cfspi, u8 *buf, size_t len);
+int cfspi_spi_remove(struct platform_device *pdev);
+int cfspi_spi_probe(struct platform_device *pdev);
+int cfspi_xmitfrm(struct cfspi *cfspi, u8 *buf, size_t len);
+int cfspi_xmitlen(struct cfspi *cfspi);
+int cfspi_rxfrm(struct cfspi *cfspi, u8 *buf, size_t len);
+void cfspi_xfer(struct work_struct *work);
+
+#endif				/* CAIF_SPI_H_ */
diff --git a/include/net/caif/cfcnfg.h b/include/net/caif/cfcnfg.h
new file mode 100644
index 00000000..90b4ff8b
--- /dev/null
+++ b/include/net/caif/cfcnfg.h
@@ -0,0 +1,90 @@
+/*
+ * Copyright (C) ST-Ericsson AB 2010
+ * Author:	Sjur Brendeland/sjur.brandeland@stericsson.com
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef CFCNFG_H_
+#define CFCNFG_H_
+#include <linux/spinlock.h>
+#include <linux/netdevice.h>
+#include <net/caif/caif_layer.h>
+#include <net/caif/cfctrl.h>
+
+struct cfcnfg;
+
+/**
+ * enum cfcnfg_phy_preference - Physical preference HW Abstraction
+ *
+ * @CFPHYPREF_UNSPECIFIED:	Default physical interface
+ *
+ * @CFPHYPREF_LOW_LAT:		Default physical interface for low-latency
+ *				traffic
+ * @CFPHYPREF_HIGH_BW:		Default physical interface for high-bandwidth
+ *				traffic
+ * @CFPHYPREF_LOOP:		TEST only Loopback interface simulating modem
+ *				responses.
+ *
+ */
+enum cfcnfg_phy_preference {
+	CFPHYPREF_UNSPECIFIED,
+	CFPHYPREF_LOW_LAT,
+	CFPHYPREF_HIGH_BW,
+	CFPHYPREF_LOOP
+};
+
+/**
+ * cfcnfg_create() - Get the CAIF configuration object given network.
+ * @net:	Network for the CAIF configuration object.
+ */
+struct cfcnfg *get_cfcnfg(struct net *net);
+
+/**
+ * cfcnfg_create() - Create the CAIF configuration object.
+ */
+struct cfcnfg *cfcnfg_create(void);
+
+/**
+ * cfcnfg_remove() -  Remove the CFCNFG object
+ * @cfg: config object
+ */
+void cfcnfg_remove(struct cfcnfg *cfg);
+
+/**
+ * cfcnfg_add_phy_layer() - Adds a physical layer to the CAIF stack.
+ * @cnfg:	Pointer to a CAIF configuration object, created by
+ *		cfcnfg_create().
+ * @dev:	Pointer to link layer device
+ * @phy_layer:	Specify the physical layer. The transmit function
+ *		MUST be set in the structure.
+ * @pref:	The phy (link layer) preference.
+ * @link_support: Protocol implementation for link layer specific protocol.
+ * @fcs:	Specify if checksum is used in CAIF Framing Layer.
+ * @head_room:	Head space needed by link specific protocol.
+ */
+void
+cfcnfg_add_phy_layer(struct cfcnfg *cnfg,
+		     struct net_device *dev, struct cflayer *phy_layer,
+		     enum cfcnfg_phy_preference pref,
+		     struct cflayer *link_support,
+		     bool fcs, int head_room);
+
+/**
+ * cfcnfg_del_phy_layer - Deletes an phy layer from the CAIF stack.
+ *
+ * @cnfg:	Pointer to a CAIF configuration object, created by
+ *		cfcnfg_create().
+ * @phy_layer:	Adaptation layer to be removed.
+ */
+int cfcnfg_del_phy_layer(struct cfcnfg *cnfg, struct cflayer *phy_layer);
+
+/**
+ * cfcnfg_set_phy_state() - Set the state of the physical interface device.
+ * @cnfg:	Configuration object
+ * @phy_layer:	Physical Layer representation
+ * @up:	State of device
+ */
+int cfcnfg_set_phy_state(struct cfcnfg *cnfg, struct cflayer *phy_layer,
+				bool up);
+
+#endif				/* CFCNFG_H_ */
diff --git a/include/net/caif/cfctrl.h b/include/net/caif/cfctrl.h
new file mode 100644
index 00000000..9e5425b4
--- /dev/null
+++ b/include/net/caif/cfctrl.h
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) ST-Ericsson AB 2010
+ * Author:	Sjur Brendeland/sjur.brandeland@stericsson.com
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef CFCTRL_H_
+#define CFCTRL_H_
+#include <net/caif/caif_layer.h>
+#include <net/caif/cfsrvl.h>
+
+/* CAIF Control packet commands */
+enum cfctrl_cmd {
+	CFCTRL_CMD_LINK_SETUP = 0,
+	CFCTRL_CMD_LINK_DESTROY = 1,
+	CFCTRL_CMD_LINK_ERR = 2,
+	CFCTRL_CMD_ENUM = 3,
+	CFCTRL_CMD_SLEEP = 4,
+	CFCTRL_CMD_WAKE = 5,
+	CFCTRL_CMD_LINK_RECONF = 6,
+	CFCTRL_CMD_START_REASON = 7,
+	CFCTRL_CMD_RADIO_SET = 8,
+	CFCTRL_CMD_MODEM_SET = 9,
+	CFCTRL_CMD_MASK = 0xf
+};
+
+/* Channel types */
+enum cfctrl_srv {
+	CFCTRL_SRV_DECM = 0,
+	CFCTRL_SRV_VEI = 1,
+	CFCTRL_SRV_VIDEO = 2,
+	CFCTRL_SRV_DBG = 3,
+	CFCTRL_SRV_DATAGRAM = 4,
+	CFCTRL_SRV_RFM = 5,
+	CFCTRL_SRV_UTIL = 6,
+	CFCTRL_SRV_MASK = 0xf
+};
+
+#define CFCTRL_RSP_BIT 0x20
+#define CFCTRL_ERR_BIT 0x10
+
+struct cfctrl_rsp {
+	void (*linksetup_rsp)(struct cflayer *layer, u8 linkid,
+			      enum cfctrl_srv serv, u8 phyid,
+			      struct cflayer *adapt_layer);
+	void (*linkdestroy_rsp)(struct cflayer *layer, u8 linkid);
+	void (*linkerror_ind)(void);
+	void (*enum_rsp)(void);
+	void (*sleep_rsp)(void);
+	void (*wake_rsp)(void);
+	void (*restart_rsp)(void);
+	void (*radioset_rsp)(void);
+	void (*reject_rsp)(struct cflayer *layer, u8 linkid,
+				struct cflayer *client_layer);
+};
+
+/* Link Setup Parameters for CAIF-Links. */
+struct cfctrl_link_param {
+	enum cfctrl_srv linktype;/* (T3,T0) Type of Channel */
+	u8 priority;		  /* (P4,P0) Priority of the channel */
+	u8 phyid;		  /* (U2-U0) Physical interface to connect */
+	u8 endpoint;		  /* (E1,E0) Endpoint for data channels */
+	u8 chtype;		  /* (H1,H0) Channel-Type, applies to
+				   *            VEI, DEBUG */
+	union {
+		struct {
+			u8 connid;	/*  (D7,D0) Video LinkId */
+		} video;
+
+		struct {
+			u32 connid;	/* (N31,Ngit0) Connection ID used
+					 *  for Datagram */
+		} datagram;
+
+		struct {
+			u32 connid;	/* Connection ID used for RFM */
+			char volume[20];	/* Volume to mount for RFM */
+		} rfm;		/* Configuration for RFM */
+
+		struct {
+			u16 fifosize_kb;	/* Psock FIFO size in KB */
+			u16 fifosize_bufs;	/* Psock # signal buffers */
+			char name[16];	/* Name of the PSOCK service */
+			u8 params[255];	/* Link setup Parameters> */
+			u16 paramlen;	/* Length of Link Setup
+						 *   Parameters */
+		} utility;	/* Configuration for Utility Links (Psock) */
+	} u;
+};
+
+/* This structure is used internally in CFCTRL */
+struct cfctrl_request_info {
+	int sequence_no;
+	enum cfctrl_cmd cmd;
+	u8 channel_id;
+	struct cfctrl_link_param param;
+	struct cflayer *client_layer;
+	struct list_head list;
+};
+
+struct cfctrl {
+	struct cfsrvl serv;
+	struct cfctrl_rsp res;
+	atomic_t req_seq_no;
+	atomic_t rsp_seq_no;
+	struct list_head list;
+	/* Protects from simultaneous access to first_req list */
+	spinlock_t info_list_lock;
+#ifndef CAIF_NO_LOOP
+	u8 loop_linkid;
+	int loop_linkused[256];
+	/* Protects simultaneous access to loop_linkid and loop_linkused */
+	spinlock_t loop_linkid_lock;
+#endif
+
+};
+
+void cfctrl_enum_req(struct cflayer *cfctrl, u8 physlinkid);
+int cfctrl_linkup_request(struct cflayer *cfctrl,
+			   struct cfctrl_link_param *param,
+			   struct cflayer *user_layer);
+int  cfctrl_linkdown_req(struct cflayer *cfctrl, u8 linkid,
+			 struct cflayer *client);
+
+struct cflayer *cfctrl_create(void);
+struct cfctrl_rsp *cfctrl_get_respfuncs(struct cflayer *layer);
+int cfctrl_cancel_req(struct cflayer *layr, struct cflayer *adap_layer);
+void cfctrl_remove(struct cflayer *layr);
+
+#endif				/* CFCTRL_H_ */
diff --git a/include/net/caif/cffrml.h b/include/net/caif/cffrml.h
new file mode 100644
index 00000000..afac1a48
--- /dev/null
+++ b/include/net/caif/cffrml.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) ST-Ericsson AB 2010
+ * Author:	Sjur Brendeland/sjur.brandeland@stericsson.com
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef CFFRML_H_
+#define CFFRML_H_
+#include <net/caif/caif_layer.h>
+#include <linux/netdevice.h>
+
+struct cffrml;
+struct cflayer *cffrml_create(u16 phyid, bool use_fcs);
+void cffrml_free(struct cflayer *layr);
+void cffrml_set_uplayer(struct cflayer *this, struct cflayer *up);
+void cffrml_set_dnlayer(struct cflayer *this, struct cflayer *dn);
+void cffrml_put(struct cflayer *layr);
+void cffrml_hold(struct cflayer *layr);
+int cffrml_refcnt_read(struct cflayer *layr);
+
+#endif /* CFFRML_H_ */
diff --git a/include/net/caif/cfmuxl.h b/include/net/caif/cfmuxl.h
new file mode 100644
index 00000000..5847a196
--- /dev/null
+++ b/include/net/caif/cfmuxl.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) ST-Ericsson AB 2010
+ * Author:	Sjur Brendeland/sjur.brandeland@stericsson.com
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef CFMUXL_H_
+#define CFMUXL_H_
+#include <net/caif/caif_layer.h>
+
+struct cfsrvl;
+struct cffrml;
+
+struct cflayer *cfmuxl_create(void);
+int cfmuxl_set_uplayer(struct cflayer *layr, struct cflayer *up, u8 linkid);
+struct cflayer *cfmuxl_remove_dnlayer(struct cflayer *layr, u8 phyid);
+int cfmuxl_set_dnlayer(struct cflayer *layr, struct cflayer *up, u8 phyid);
+struct cflayer *cfmuxl_remove_uplayer(struct cflayer *layr, u8 linkid);
+
+#endif				/* CFMUXL_H_ */
diff --git a/include/net/caif/cfpkt.h b/include/net/caif/cfpkt.h
new file mode 100644
index 00000000..6bd200a4
--- /dev/null
+++ b/include/net/caif/cfpkt.h
@@ -0,0 +1,198 @@
+/*
+ * Copyright (C) ST-Ericsson AB 2010
+ * Author:	Sjur Brendeland/sjur.brandeland@stericsson.com
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef CFPKT_H_
+#define CFPKT_H_
+#include <net/caif/caif_layer.h>
+#include <linux/types.h>
+struct cfpkt;
+
+/* Create a CAIF packet.
+ * len: Length of packet to be created
+ * @return New packet.
+ */
+struct cfpkt *cfpkt_create(u16 len);
+
+/*
+ * Destroy a CAIF Packet.
+ * pkt Packet to be destoyed.
+ */
+void cfpkt_destroy(struct cfpkt *pkt);
+
+/*
+ * Extract header from packet.
+ *
+ * pkt Packet to extract header data from.
+ * data Pointer to copy the header data into.
+ * len Length of head data to copy.
+ * @return zero on success and error code upon failure
+ */
+int cfpkt_extr_head(struct cfpkt *pkt, void *data, u16 len);
+
+/*
+ * Peek header from packet.
+ * Reads data from packet without changing packet.
+ *
+ * pkt Packet to extract header data from.
+ * data Pointer to copy the header data into.
+ * len Length of head data to copy.
+ * @return zero on success and error code upon failure
+ */
+int cfpkt_peek_head(struct cfpkt *pkt, void *data, u16 len);
+
+/*
+ * Extract header from trailer (end of packet).
+ *
+ * pkt Packet to extract header data from.
+ * data Pointer to copy the trailer data into.
+ * len Length of header data to copy.
+ * @return zero on success and error code upon failure
+ */
+int cfpkt_extr_trail(struct cfpkt *pkt, void *data, u16 len);
+
+/*
+ * Add header to packet.
+ *
+ *
+ * pkt Packet to add header data to.
+ * data Pointer to data to copy into the header.
+ * len Length of header data to copy.
+ * @return zero on success and error code upon failure
+ */
+int cfpkt_add_head(struct cfpkt *pkt, const void *data, u16 len);
+
+/*
+ * Add trailer to packet.
+ *
+ *
+ * pkt Packet to add trailer data to.
+ * data Pointer to data to copy into the trailer.
+ * len Length of trailer data to copy.
+ * @return zero on success and error code upon failure
+ */
+int cfpkt_add_trail(struct cfpkt *pkt, const void *data, u16 len);
+
+/*
+ * Pad trailer on packet.
+ * Moves data pointer in packet, no content copied.
+ *
+ * pkt Packet in which to pad trailer.
+ * len Length of padding to add.
+ * @return zero on success and error code upon failure
+ */
+int cfpkt_pad_trail(struct cfpkt *pkt, u16 len);
+
+/*
+ * Add a single byte to packet body (tail).
+ *
+ * pkt Packet in which to add byte.
+ * data Byte to add.
+ * @return zero on success and error code upon failure
+ */
+int cfpkt_addbdy(struct cfpkt *pkt, const u8 data);
+
+/*
+ * Add a data to packet body (tail).
+ *
+ * pkt Packet in which to add data.
+ * data Pointer to data to copy into the packet body.
+ * len Length of data to add.
+ * @return zero on success and error code upon failure
+ */
+int cfpkt_add_body(struct cfpkt *pkt, const void *data, u16 len);
+
+/*
+ * Checks whether there are more data to process in packet.
+ * pkt Packet to check.
+ * @return true if more data are available in packet false otherwise
+ */
+bool cfpkt_more(struct cfpkt *pkt);
+
+/*
+ * Checks whether the packet is erroneous,
+ * i.e. if it has been attempted to extract more data than available in packet
+ * or writing more data than has been allocated in cfpkt_create().
+ * pkt Packet to check.
+ * @return true on error false otherwise
+ */
+bool cfpkt_erroneous(struct cfpkt *pkt);
+
+/*
+ * Get the packet length.
+ * pkt Packet to get length from.
+ * @return Number of bytes in packet.
+ */
+u16 cfpkt_getlen(struct cfpkt *pkt);
+
+/*
+ * Set the packet length, by adjusting the trailer pointer according to length.
+ * pkt Packet to set length.
+ * len Packet length.
+ * @return Number of bytes in packet.
+ */
+int cfpkt_setlen(struct cfpkt *pkt, u16 len);
+
+/*
+ * cfpkt_append - Appends a packet's data to another packet.
+ * dstpkt:    Packet to append data into, WILL BE FREED BY THIS FUNCTION
+ * addpkt:    Packet to be appended and automatically released,
+ *            WILL BE FREED BY THIS FUNCTION.
+ * expectlen: Packet's expected total length. This should be considered
+ *            as a hint.
+ * NB: Input packets will be destroyed after appending and cannot be used
+ * after calling this function.
+ * @return    The new appended packet.
+ */
+struct cfpkt *cfpkt_append(struct cfpkt *dstpkt, struct cfpkt *addpkt,
+		      u16 expectlen);
+
+/*
+ * cfpkt_split - Split a packet into two packets at the specified split point.
+ * pkt: Packet to be split (will contain the first part of the data on exit)
+ * pos: Position to split packet in two parts.
+ * @return The new packet, containing the second part of the data.
+ */
+struct cfpkt *cfpkt_split(struct cfpkt *pkt, u16 pos);
+
+/*
+ * Iteration function, iterates the packet buffers from start to end.
+ *
+ * Checksum iteration function used to iterate buffers
+ * (we may have packets consisting of a chain of buffers)
+ * pkt:       Packet to calculate checksum for
+ * iter_func: Function pointer to iteration function
+ * chks:      Checksum calculated so far.
+ * buf:       Pointer to the buffer to checksum
+ * len:       Length of buf.
+ * data:      Initial checksum value.
+ * @return    Checksum of buffer.
+ */
+
+u16 cfpkt_iterate(struct cfpkt *pkt,
+		u16 (*iter_func)(u16 chks, void *buf, u16 len),
+		u16 data);
+
+/* Map from a "native" packet (e.g. Linux Socket Buffer) to a CAIF packet.
+ *  dir - Direction indicating whether this packet is to be sent or received.
+ *  nativepkt  - The native packet to be transformed to a CAIF packet
+ *  @return The mapped CAIF Packet CFPKT.
+ */
+struct cfpkt *cfpkt_fromnative(enum caif_direction dir, void *nativepkt);
+
+/* Map from a CAIF packet to a "native" packet (e.g. Linux Socket Buffer).
+ *  pkt  - The CAIF packet to be transformed into a "native" packet.
+ *  @return The native packet transformed from a CAIF packet.
+ */
+void *cfpkt_tonative(struct cfpkt *pkt);
+
+
+/*
+ * Returns packet information for a packet.
+ * pkt Packet to get info from;
+ * @return Packet information
+ */
+struct caif_payload_info *cfpkt_info(struct cfpkt *pkt);
+#endif				/* CFPKT_H_ */
diff --git a/include/net/caif/cfserl.h b/include/net/caif/cfserl.h
new file mode 100644
index 00000000..f121299a
--- /dev/null
+++ b/include/net/caif/cfserl.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright (C) ST-Ericsson AB 2010
+ * Author:	Sjur Brendeland/sjur.brandeland@stericsson.com
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef CFSERL_H_
+#define CFSERL_H_
+#include <net/caif/caif_layer.h>
+
+struct cflayer *cfserl_create(int instance, bool use_stx);
+#endif
diff --git a/include/net/caif/cfsrvl.h b/include/net/caif/cfsrvl.h
new file mode 100644
index 00000000..0f590524
--- /dev/null
+++ b/include/net/caif/cfsrvl.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) ST-Ericsson AB 2010
+ * Author:	Sjur Brendeland/sjur.brandeland@stericsson.com
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef CFSRVL_H_
+#define CFSRVL_H_
+#include <linux/list.h>
+#include <linux/stddef.h>
+#include <linux/types.h>
+#include <linux/kref.h>
+#include <linux/rculist.h>
+
+struct cfsrvl {
+	struct cflayer layer;
+	bool open;
+	bool phy_flow_on;
+	bool modem_flow_on;
+	bool supports_flowctrl;
+	void (*release)(struct cflayer *layer);
+	struct dev_info dev_info;
+	void (*hold)(struct cflayer *lyr);
+	void (*put)(struct cflayer *lyr);
+	struct rcu_head rcu;
+};
+
+struct cflayer *cfvei_create(u8 linkid, struct dev_info *dev_info);
+struct cflayer *cfdgml_create(u8 linkid, struct dev_info *dev_info);
+struct cflayer *cfutill_create(u8 linkid, struct dev_info *dev_info);
+struct cflayer *cfvidl_create(u8 linkid, struct dev_info *dev_info);
+struct cflayer *cfrfml_create(u8 linkid, struct dev_info *dev_info,
+				int mtu_size);
+struct cflayer *cfdbgl_create(u8 linkid, struct dev_info *dev_info);
+
+void cfsrvl_ctrlcmd(struct cflayer *layr, enum caif_ctrlcmd ctrl,
+		     int phyid);
+
+bool cfsrvl_phyid_match(struct cflayer *layer, int phyid);
+
+void cfsrvl_init(struct cfsrvl *service,
+			u8 channel_id,
+			struct dev_info *dev_info,
+			bool supports_flowctrl);
+bool cfsrvl_ready(struct cfsrvl *service, int *err);
+u8 cfsrvl_getphyid(struct cflayer *layer);
+
+static inline void cfsrvl_get(struct cflayer *layr)
+{
+	struct cfsrvl *s = container_of(layr, struct cfsrvl, layer);
+	if (layr == NULL || layr->up == NULL || s->hold == NULL)
+		return;
+
+	s->hold(layr->up);
+}
+
+static inline void cfsrvl_put(struct cflayer *layr)
+{
+	struct cfsrvl *s = container_of(layr, struct cfsrvl, layer);
+	if (layr == NULL || layr->up == NULL || s->hold == NULL)
+		return;
+
+	s->put(layr->up);
+}
+#endif				/* CFSRVL_H_ */
diff --git a/include/net/cfg80211-wext.h b/include/net/cfg80211-wext.h
new file mode 100644
index 00000000..25baddc4
--- /dev/null
+++ b/include/net/cfg80211-wext.h
@@ -0,0 +1,55 @@
+#ifndef __NET_CFG80211_WEXT_H
+#define __NET_CFG80211_WEXT_H
+/*
+ * 802.11 device and configuration interface -- wext handlers
+ *
+ * Copyright 2006-2010	Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/netdevice.h>
+#include <linux/wireless.h>
+#include <net/iw_handler.h>
+
+/*
+ * Temporary wext handlers & helper functions
+ *
+ * These are used only by drivers that aren't yet fully
+ * converted to cfg80211.
+ */
+int cfg80211_wext_giwname(struct net_device *dev,
+			  struct iw_request_info *info,
+			  char *name, char *extra);
+int cfg80211_wext_siwmode(struct net_device *dev, struct iw_request_info *info,
+			  u32 *mode, char *extra);
+int cfg80211_wext_giwmode(struct net_device *dev, struct iw_request_info *info,
+			  u32 *mode, char *extra);
+int cfg80211_wext_siwscan(struct net_device *dev,
+			  struct iw_request_info *info,
+			  union iwreq_data *wrqu, char *extra);
+int cfg80211_wext_giwscan(struct net_device *dev,
+			  struct iw_request_info *info,
+			  struct iw_point *data, char *extra);
+int cfg80211_wext_giwrange(struct net_device *dev,
+			   struct iw_request_info *info,
+			   struct iw_point *data, char *extra);
+int cfg80211_wext_siwrts(struct net_device *dev,
+			 struct iw_request_info *info,
+			 struct iw_param *rts, char *extra);
+int cfg80211_wext_giwrts(struct net_device *dev,
+			 struct iw_request_info *info,
+			 struct iw_param *rts, char *extra);
+int cfg80211_wext_siwfrag(struct net_device *dev,
+			  struct iw_request_info *info,
+			  struct iw_param *frag, char *extra);
+int cfg80211_wext_giwfrag(struct net_device *dev,
+			  struct iw_request_info *info,
+			  struct iw_param *frag, char *extra);
+int cfg80211_wext_giwretry(struct net_device *dev,
+			   struct iw_request_info *info,
+			   struct iw_param *retry, char *extra);
+
+#endif /* __NET_CFG80211_WEXT_H */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
new file mode 100644
index 00000000..83d800c3
--- /dev/null
+++ b/include/net/cfg80211.h
@@ -0,0 +1,3399 @@
+#ifndef __NET_CFG80211_H
+#define __NET_CFG80211_H
+/*
+ * 802.11 device and configuration interface
+ *
+ * Copyright 2006-2010	Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/netdevice.h>
+#include <linux/debugfs.h>
+#include <linux/list.h>
+#include <linux/bug.h>
+#include <linux/netlink.h>
+#include <linux/skbuff.h>
+#include <linux/nl80211.h>
+#include <linux/if_ether.h>
+#include <linux/ieee80211.h>
+#include <net/regulatory.h>
+
+/**
+ * DOC: Introduction
+ *
+ * cfg80211 is the configuration API for 802.11 devices in Linux. It bridges
+ * userspace and drivers, and offers some utility functionality associated
+ * with 802.11. cfg80211 must, directly or indirectly via mac80211, be used
+ * by all modern wireless drivers in Linux, so that they offer a consistent
+ * API through nl80211. For backward compatibility, cfg80211 also offers
+ * wireless extensions to userspace, but hides them from drivers completely.
+ *
+ * Additionally, cfg80211 contains code to help enforce regulatory spectrum
+ * use restrictions.
+ */
+
+
+/**
+ * DOC: Device registration
+ *
+ * In order for a driver to use cfg80211, it must register the hardware device
+ * with cfg80211. This happens through a number of hardware capability structs
+ * described below.
+ *
+ * The fundamental structure for each device is the 'wiphy', of which each
+ * instance describes a physical wireless device connected to the system. Each
+ * such wiphy can have zero, one, or many virtual interfaces associated with
+ * it, which need to be identified as such by pointing the network interface's
+ * @ieee80211_ptr pointer to a &struct wireless_dev which further describes
+ * the wireless part of the interface, normally this struct is embedded in the
+ * network interface's private data area. Drivers can optionally allow creating
+ * or destroying virtual interfaces on the fly, but without at least one or the
+ * ability to create some the wireless device isn't useful.
+ *
+ * Each wiphy structure contains device capability information, and also has
+ * a pointer to the various operations the driver offers. The definitions and
+ * structures here describe these capabilities in detail.
+ */
+
+/*
+ * wireless hardware capability structures
+ */
+
+/**
+ * enum ieee80211_band - supported frequency bands
+ *
+ * The bands are assigned this way because the supported
+ * bitrates differ in these bands.
+ *
+ * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band
+ * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7)
+ * @IEEE80211_NUM_BANDS: number of defined bands
+ */
+enum ieee80211_band {
+	IEEE80211_BAND_2GHZ = NL80211_BAND_2GHZ,
+	IEEE80211_BAND_5GHZ = NL80211_BAND_5GHZ,
+
+	/* keep last */
+	IEEE80211_NUM_BANDS
+};
+
+/**
+ * enum ieee80211_channel_flags - channel flags
+ *
+ * Channel flags set by the regulatory control code.
+ *
+ * @IEEE80211_CHAN_DISABLED: This channel is disabled.
+ * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted
+ *	on this channel.
+ * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel.
+ * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
+ * @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel
+ * 	is not permitted.
+ * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel
+ * 	is not permitted.
+ */
+enum ieee80211_channel_flags {
+	IEEE80211_CHAN_DISABLED		= 1<<0,
+	IEEE80211_CHAN_PASSIVE_SCAN	= 1<<1,
+	IEEE80211_CHAN_NO_IBSS		= 1<<2,
+	IEEE80211_CHAN_RADAR		= 1<<3,
+	IEEE80211_CHAN_NO_HT40PLUS	= 1<<4,
+	IEEE80211_CHAN_NO_HT40MINUS	= 1<<5,
+};
+
+#define IEEE80211_CHAN_NO_HT40 \
+	(IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
+
+/**
+ * struct ieee80211_channel - channel definition
+ *
+ * This structure describes a single channel for use
+ * with cfg80211.
+ *
+ * @center_freq: center frequency in MHz
+ * @hw_value: hardware-specific value for the channel
+ * @flags: channel flags from &enum ieee80211_channel_flags.
+ * @orig_flags: channel flags at registration time, used by regulatory
+ *	code to support devices with additional restrictions
+ * @band: band this channel belongs to.
+ * @max_antenna_gain: maximum antenna gain in dBi
+ * @max_power: maximum transmission power (in dBm)
+ * @max_reg_power: maximum regulatory transmission power (in dBm)
+ * @beacon_found: helper to regulatory code to indicate when a beacon
+ *	has been found on this channel. Use regulatory_hint_found_beacon()
+ *	to enable this, this is useful only on 5 GHz band.
+ * @orig_mag: internal use
+ * @orig_mpwr: internal use
+ */
+struct ieee80211_channel {
+	enum ieee80211_band band;
+	u16 center_freq;
+	u16 hw_value;
+	u32 flags;
+	int max_antenna_gain;
+	int max_power;
+	int max_reg_power;
+	bool beacon_found;
+	u32 orig_flags;
+	int orig_mag, orig_mpwr;
+};
+
+/**
+ * enum ieee80211_rate_flags - rate flags
+ *
+ * Hardware/specification flags for rates. These are structured
+ * in a way that allows using the same bitrate structure for
+ * different bands/PHY modes.
+ *
+ * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short
+ *	preamble on this bitrate; only relevant in 2.4GHz band and
+ *	with CCK rates.
+ * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate
+ *	when used with 802.11a (on the 5 GHz band); filled by the
+ *	core code when registering the wiphy.
+ * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate
+ *	when used with 802.11b (on the 2.4 GHz band); filled by the
+ *	core code when registering the wiphy.
+ * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate
+ *	when used with 802.11g (on the 2.4 GHz band); filled by the
+ *	core code when registering the wiphy.
+ * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode.
+ */
+enum ieee80211_rate_flags {
+	IEEE80211_RATE_SHORT_PREAMBLE	= 1<<0,
+	IEEE80211_RATE_MANDATORY_A	= 1<<1,
+	IEEE80211_RATE_MANDATORY_B	= 1<<2,
+	IEEE80211_RATE_MANDATORY_G	= 1<<3,
+	IEEE80211_RATE_ERP_G		= 1<<4,
+};
+
+/**
+ * struct ieee80211_rate - bitrate definition
+ *
+ * This structure describes a bitrate that an 802.11 PHY can
+ * operate with. The two values @hw_value and @hw_value_short
+ * are only for driver use when pointers to this structure are
+ * passed around.
+ *
+ * @flags: rate-specific flags
+ * @bitrate: bitrate in units of 100 Kbps
+ * @hw_value: driver/hardware value for this rate
+ * @hw_value_short: driver/hardware value for this rate when
+ *	short preamble is used
+ */
+struct ieee80211_rate {
+	u32 flags;
+	u16 bitrate;
+	u16 hw_value, hw_value_short;
+};
+
+/**
+ * struct ieee80211_sta_ht_cap - STA's HT capabilities
+ *
+ * This structure describes most essential parameters needed
+ * to describe 802.11n HT capabilities for an STA.
+ *
+ * @ht_supported: is HT supported by the STA
+ * @cap: HT capabilities map as described in 802.11n spec
+ * @ampdu_factor: Maximum A-MPDU length factor
+ * @ampdu_density: Minimum A-MPDU spacing
+ * @mcs: Supported MCS rates
+ */
+struct ieee80211_sta_ht_cap {
+	u16 cap; /* use IEEE80211_HT_CAP_ */
+	bool ht_supported;
+	u8 ampdu_factor;
+	u8 ampdu_density;
+	struct ieee80211_mcs_info mcs;
+};
+
+/**
+ * struct ieee80211_supported_band - frequency band definition
+ *
+ * This structure describes a frequency band a wiphy
+ * is able to operate in.
+ *
+ * @channels: Array of channels the hardware can operate in
+ *	in this band.
+ * @band: the band this structure represents
+ * @n_channels: Number of channels in @channels
+ * @bitrates: Array of bitrates the hardware can operate with
+ *	in this band. Must be sorted to give a valid "supported
+ *	rates" IE, i.e. CCK rates first, then OFDM.
+ * @n_bitrates: Number of bitrates in @bitrates
+ * @ht_cap: HT capabilities in this band
+ */
+struct ieee80211_supported_band {
+	struct ieee80211_channel *channels;
+	struct ieee80211_rate *bitrates;
+	enum ieee80211_band band;
+	int n_channels;
+	int n_bitrates;
+	struct ieee80211_sta_ht_cap ht_cap;
+};
+
+/*
+ * Wireless hardware/device configuration structures and methods
+ */
+
+/**
+ * DOC: Actions and configuration
+ *
+ * Each wireless device and each virtual interface offer a set of configuration
+ * operations and other actions that are invoked by userspace. Each of these
+ * actions is described in the operations structure, and the parameters these
+ * operations use are described separately.
+ *
+ * Additionally, some operations are asynchronous and expect to get status
+ * information via some functions that drivers need to call.
+ *
+ * Scanning and BSS list handling with its associated functionality is described
+ * in a separate chapter.
+ */
+
+/**
+ * struct vif_params - describes virtual interface parameters
+ * @use_4addr: use 4-address frames
+ */
+struct vif_params {
+       int use_4addr;
+};
+
+/**
+ * struct key_params - key information
+ *
+ * Information about a key
+ *
+ * @key: key material
+ * @key_len: length of key material
+ * @cipher: cipher suite selector
+ * @seq: sequence counter (IV/PN) for TKIP and CCMP keys, only used
+ *	with the get_key() callback, must be in little endian,
+ *	length given by @seq_len.
+ * @seq_len: length of @seq.
+ */
+struct key_params {
+	u8 *key;
+	u8 *seq;
+	int key_len;
+	int seq_len;
+	u32 cipher;
+};
+
+/**
+ * enum survey_info_flags - survey information flags
+ *
+ * @SURVEY_INFO_NOISE_DBM: noise (in dBm) was filled in
+ * @SURVEY_INFO_IN_USE: channel is currently being used
+ * @SURVEY_INFO_CHANNEL_TIME: channel active time (in ms) was filled in
+ * @SURVEY_INFO_CHANNEL_TIME_BUSY: channel busy time was filled in
+ * @SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: extension channel busy time was filled in
+ * @SURVEY_INFO_CHANNEL_TIME_RX: channel receive time was filled in
+ * @SURVEY_INFO_CHANNEL_TIME_TX: channel transmit time was filled in
+ *
+ * Used by the driver to indicate which info in &struct survey_info
+ * it has filled in during the get_survey().
+ */
+enum survey_info_flags {
+	SURVEY_INFO_NOISE_DBM = 1<<0,
+	SURVEY_INFO_IN_USE = 1<<1,
+	SURVEY_INFO_CHANNEL_TIME = 1<<2,
+	SURVEY_INFO_CHANNEL_TIME_BUSY = 1<<3,
+	SURVEY_INFO_CHANNEL_TIME_EXT_BUSY = 1<<4,
+	SURVEY_INFO_CHANNEL_TIME_RX = 1<<5,
+	SURVEY_INFO_CHANNEL_TIME_TX = 1<<6,
+};
+
+/**
+ * struct survey_info - channel survey response
+ *
+ * @channel: the channel this survey record reports, mandatory
+ * @filled: bitflag of flags from &enum survey_info_flags
+ * @noise: channel noise in dBm. This and all following fields are
+ *     optional
+ * @channel_time: amount of time in ms the radio spent on the channel
+ * @channel_time_busy: amount of time the primary channel was sensed busy
+ * @channel_time_ext_busy: amount of time the extension channel was sensed busy
+ * @channel_time_rx: amount of time the radio spent receiving data
+ * @channel_time_tx: amount of time the radio spent transmitting data
+ *
+ * Used by dump_survey() to report back per-channel survey information.
+ *
+ * This structure can later be expanded with things like
+ * channel duty cycle etc.
+ */
+struct survey_info {
+	struct ieee80211_channel *channel;
+	u64 channel_time;
+	u64 channel_time_busy;
+	u64 channel_time_ext_busy;
+	u64 channel_time_rx;
+	u64 channel_time_tx;
+	u32 filled;
+	s8 noise;
+};
+
+/**
+ * struct cfg80211_crypto_settings - Crypto settings
+ * @wpa_versions: indicates which, if any, WPA versions are enabled
+ *	(from enum nl80211_wpa_versions)
+ * @cipher_group: group key cipher suite (or 0 if unset)
+ * @n_ciphers_pairwise: number of AP supported unicast ciphers
+ * @ciphers_pairwise: unicast key cipher suites
+ * @n_akm_suites: number of AKM suites
+ * @akm_suites: AKM suites
+ * @control_port: Whether user space controls IEEE 802.1X port, i.e.,
+ *	sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is
+ *	required to assume that the port is unauthorized until authorized by
+ *	user space. Otherwise, port is marked authorized by default.
+ * @control_port_ethertype: the control port protocol that should be
+ *	allowed through even on unauthorized ports
+ * @control_port_no_encrypt: TRUE to prevent encryption of control port
+ *	protocol frames.
+ */
+struct cfg80211_crypto_settings {
+	u32 wpa_versions;
+	u32 cipher_group;
+	int n_ciphers_pairwise;
+	u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES];
+	int n_akm_suites;
+	u32 akm_suites[NL80211_MAX_NR_AKM_SUITES];
+	bool control_port;
+	__be16 control_port_ethertype;
+	bool control_port_no_encrypt;
+};
+
+/**
+ * struct cfg80211_beacon_data - beacon data
+ * @head: head portion of beacon (before TIM IE)
+ *     or %NULL if not changed
+ * @tail: tail portion of beacon (after TIM IE)
+ *     or %NULL if not changed
+ * @head_len: length of @head
+ * @tail_len: length of @tail
+ * @beacon_ies: extra information element(s) to add into Beacon frames or %NULL
+ * @beacon_ies_len: length of beacon_ies in octets
+ * @proberesp_ies: extra information element(s) to add into Probe Response
+ *	frames or %NULL
+ * @proberesp_ies_len: length of proberesp_ies in octets
+ * @assocresp_ies: extra information element(s) to add into (Re)Association
+ *	Response frames or %NULL
+ * @assocresp_ies_len: length of assocresp_ies in octets
+ * @probe_resp_len: length of probe response template (@probe_resp)
+ * @probe_resp: probe response template (AP mode only)
+ */
+struct cfg80211_beacon_data {
+	const u8 *head, *tail;
+	const u8 *beacon_ies;
+	const u8 *proberesp_ies;
+	const u8 *assocresp_ies;
+	const u8 *probe_resp;
+
+	size_t head_len, tail_len;
+	size_t beacon_ies_len;
+	size_t proberesp_ies_len;
+	size_t assocresp_ies_len;
+	size_t probe_resp_len;
+};
+
+/**
+ * struct cfg80211_ap_settings - AP configuration
+ *
+ * Used to configure an AP interface.
+ *
+ * @beacon: beacon data
+ * @beacon_interval: beacon interval
+ * @dtim_period: DTIM period
+ * @ssid: SSID to be used in the BSS (note: may be %NULL if not provided from
+ *	user space)
+ * @ssid_len: length of @ssid
+ * @hidden_ssid: whether to hide the SSID in Beacon/Probe Response frames
+ * @crypto: crypto settings
+ * @privacy: the BSS uses privacy
+ * @auth_type: Authentication type (algorithm)
+ * @inactivity_timeout: time in seconds to determine station's inactivity.
+ */
+struct cfg80211_ap_settings {
+	struct cfg80211_beacon_data beacon;
+
+	int beacon_interval, dtim_period;
+	const u8 *ssid;
+	size_t ssid_len;
+	enum nl80211_hidden_ssid hidden_ssid;
+	struct cfg80211_crypto_settings crypto;
+	bool privacy;
+	enum nl80211_auth_type auth_type;
+	int inactivity_timeout;
+};
+
+/**
+ * enum plink_action - actions to perform in mesh peers
+ *
+ * @PLINK_ACTION_INVALID: action 0 is reserved
+ * @PLINK_ACTION_OPEN: start mesh peer link establishment
+ * @PLINK_ACTION_BLOCK: block traffic from this mesh peer
+ */
+enum plink_actions {
+	PLINK_ACTION_INVALID,
+	PLINK_ACTION_OPEN,
+	PLINK_ACTION_BLOCK,
+};
+
+/**
+ * enum station_parameters_apply_mask - station parameter values to apply
+ * @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp)
+ *
+ * Not all station parameters have in-band "no change" signalling,
+ * for those that don't these flags will are used.
+ */
+enum station_parameters_apply_mask {
+	STATION_PARAM_APPLY_UAPSD = BIT(0),
+};
+
+/**
+ * struct station_parameters - station parameters
+ *
+ * Used to change and create a new station.
+ *
+ * @vlan: vlan interface station should belong to
+ * @supported_rates: supported rates in IEEE 802.11 format
+ *	(or NULL for no change)
+ * @supported_rates_len: number of supported rates
+ * @sta_flags_mask: station flags that changed
+ *	(bitmask of BIT(NL80211_STA_FLAG_...))
+ * @sta_flags_set: station flags values
+ *	(bitmask of BIT(NL80211_STA_FLAG_...))
+ * @listen_interval: listen interval or -1 for no change
+ * @aid: AID or zero for no change
+ * @plink_action: plink action to take
+ * @plink_state: set the peer link state for a station
+ * @ht_capa: HT capabilities of station
+ * @uapsd_queues: bitmap of queues configured for uapsd. same format
+ *	as the AC bitmap in the QoS info field
+ * @max_sp: max Service Period. same format as the MAX_SP in the
+ *	QoS info field (but already shifted down)
+ * @sta_modify_mask: bitmap indicating which parameters changed
+ *	(for those that don't have a natural "no change" value),
+ *	see &enum station_parameters_apply_mask
+ */
+struct station_parameters {
+	u8 *supported_rates;
+	struct net_device *vlan;
+	u32 sta_flags_mask, sta_flags_set;
+	u32 sta_modify_mask;
+	int listen_interval;
+	u16 aid;
+	u8 supported_rates_len;
+	u8 plink_action;
+	u8 plink_state;
+	struct ieee80211_ht_cap *ht_capa;
+	u8 uapsd_queues;
+	u8 max_sp;
+};
+
+/**
+ * enum station_info_flags - station information flags
+ *
+ * Used by the driver to indicate which info in &struct station_info
+ * it has filled in during get_station() or dump_station().
+ *
+ * @STATION_INFO_INACTIVE_TIME: @inactive_time filled
+ * @STATION_INFO_RX_BYTES: @rx_bytes filled
+ * @STATION_INFO_TX_BYTES: @tx_bytes filled
+ * @STATION_INFO_LLID: @llid filled
+ * @STATION_INFO_PLID: @plid filled
+ * @STATION_INFO_PLINK_STATE: @plink_state filled
+ * @STATION_INFO_SIGNAL: @signal filled
+ * @STATION_INFO_TX_BITRATE: @txrate fields are filled
+ *  (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs)
+ * @STATION_INFO_RX_PACKETS: @rx_packets filled
+ * @STATION_INFO_TX_PACKETS: @tx_packets filled
+ * @STATION_INFO_TX_RETRIES: @tx_retries filled
+ * @STATION_INFO_TX_FAILED: @tx_failed filled
+ * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled
+ * @STATION_INFO_SIGNAL_AVG: @signal_avg filled
+ * @STATION_INFO_RX_BITRATE: @rxrate fields are filled
+ * @STATION_INFO_BSS_PARAM: @bss_param filled
+ * @STATION_INFO_CONNECTED_TIME: @connected_time filled
+ * @STATION_INFO_ASSOC_REQ_IES: @assoc_req_ies filled
+ * @STATION_INFO_STA_FLAGS: @sta_flags filled
+ * @STATION_INFO_BEACON_LOSS_COUNT: @beacon_loss_count filled
+ */
+enum station_info_flags {
+	STATION_INFO_INACTIVE_TIME	= 1<<0,
+	STATION_INFO_RX_BYTES		= 1<<1,
+	STATION_INFO_TX_BYTES		= 1<<2,
+	STATION_INFO_LLID		= 1<<3,
+	STATION_INFO_PLID		= 1<<4,
+	STATION_INFO_PLINK_STATE	= 1<<5,
+	STATION_INFO_SIGNAL		= 1<<6,
+	STATION_INFO_TX_BITRATE		= 1<<7,
+	STATION_INFO_RX_PACKETS		= 1<<8,
+	STATION_INFO_TX_PACKETS		= 1<<9,
+	STATION_INFO_TX_RETRIES		= 1<<10,
+	STATION_INFO_TX_FAILED		= 1<<11,
+	STATION_INFO_RX_DROP_MISC	= 1<<12,
+	STATION_INFO_SIGNAL_AVG		= 1<<13,
+	STATION_INFO_RX_BITRATE		= 1<<14,
+	STATION_INFO_BSS_PARAM          = 1<<15,
+	STATION_INFO_CONNECTED_TIME	= 1<<16,
+	STATION_INFO_ASSOC_REQ_IES	= 1<<17,
+	STATION_INFO_STA_FLAGS		= 1<<18,
+	STATION_INFO_BEACON_LOSS_COUNT	= 1<<19
+};
+
+/**
+ * enum station_info_rate_flags - bitrate info flags
+ *
+ * Used by the driver to indicate the specific rate transmission
+ * type for 802.11n transmissions.
+ *
+ * @RATE_INFO_FLAGS_MCS: @tx_bitrate_mcs filled
+ * @RATE_INFO_FLAGS_40_MHZ_WIDTH: 40 Mhz width transmission
+ * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval
+ */
+enum rate_info_flags {
+	RATE_INFO_FLAGS_MCS		= 1<<0,
+	RATE_INFO_FLAGS_40_MHZ_WIDTH	= 1<<1,
+	RATE_INFO_FLAGS_SHORT_GI	= 1<<2,
+};
+
+/**
+ * struct rate_info - bitrate information
+ *
+ * Information about a receiving or transmitting bitrate
+ *
+ * @flags: bitflag of flags from &enum rate_info_flags
+ * @mcs: mcs index if struct describes a 802.11n bitrate
+ * @legacy: bitrate in 100kbit/s for 802.11abg
+ */
+struct rate_info {
+	u8 flags;
+	u8 mcs;
+	u16 legacy;
+};
+
+/**
+ * enum station_info_rate_flags - bitrate info flags
+ *
+ * Used by the driver to indicate the specific rate transmission
+ * type for 802.11n transmissions.
+ *
+ * @BSS_PARAM_FLAGS_CTS_PROT: whether CTS protection is enabled
+ * @BSS_PARAM_FLAGS_SHORT_PREAMBLE: whether short preamble is enabled
+ * @BSS_PARAM_FLAGS_SHORT_SLOT_TIME: whether short slot time is enabled
+ */
+enum bss_param_flags {
+	BSS_PARAM_FLAGS_CTS_PROT	= 1<<0,
+	BSS_PARAM_FLAGS_SHORT_PREAMBLE	= 1<<1,
+	BSS_PARAM_FLAGS_SHORT_SLOT_TIME	= 1<<2,
+};
+
+/**
+ * struct sta_bss_parameters - BSS parameters for the attached station
+ *
+ * Information about the currently associated BSS
+ *
+ * @flags: bitflag of flags from &enum bss_param_flags
+ * @dtim_period: DTIM period for the BSS
+ * @beacon_interval: beacon interval
+ */
+struct sta_bss_parameters {
+	u8 flags;
+	u8 dtim_period;
+	u16 beacon_interval;
+};
+
+/**
+ * struct station_info - station information
+ *
+ * Station information filled by driver for get_station() and dump_station.
+ *
+ * @filled: bitflag of flags from &enum station_info_flags
+ * @connected_time: time(in secs) since a station is last connected
+ * @inactive_time: time since last station activity (tx/rx) in milliseconds
+ * @rx_bytes: bytes received from this station
+ * @tx_bytes: bytes transmitted to this station
+ * @llid: mesh local link id
+ * @plid: mesh peer link id
+ * @plink_state: mesh peer link state
+ * @signal: the signal strength, type depends on the wiphy's signal_type
+	NOTE: For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
+ * @signal_avg: avg signal strength, type depends on the wiphy's signal_type
+	NOTE: For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
+ * @txrate: current unicast bitrate from this station
+ * @rxrate: current unicast bitrate to this station
+ * @rx_packets: packets received from this station
+ * @tx_packets: packets transmitted to this station
+ * @tx_retries: cumulative retry counts
+ * @tx_failed: number of failed transmissions (retries exceeded, no ACK)
+ * @rx_dropped_misc:  Dropped for un-specified reason.
+ * @bss_param: current BSS parameters
+ * @generation: generation number for nl80211 dumps.
+ *	This number should increase every time the list of stations
+ *	changes, i.e. when a station is added or removed, so that
+ *	userspace can tell whether it got a consistent snapshot.
+ * @assoc_req_ies: IEs from (Re)Association Request.
+ *	This is used only when in AP mode with drivers that do not use
+ *	user space MLME/SME implementation. The information is provided for
+ *	the cfg80211_new_sta() calls to notify user space of the IEs.
+ * @assoc_req_ies_len: Length of assoc_req_ies buffer in octets.
+ * @sta_flags: station flags mask & values
+ * @beacon_loss_count: Number of times beacon loss event has triggered.
+ */
+struct station_info {
+	u32 filled;
+	u32 connected_time;
+	u32 inactive_time;
+	u32 rx_bytes;
+	u32 tx_bytes;
+	u16 llid;
+	u16 plid;
+	u8 plink_state;
+	s8 signal;
+	s8 signal_avg;
+	struct rate_info txrate;
+	struct rate_info rxrate;
+	u32 rx_packets;
+	u32 tx_packets;
+	u32 tx_retries;
+	u32 tx_failed;
+	u32 rx_dropped_misc;
+	struct sta_bss_parameters bss_param;
+	struct nl80211_sta_flag_update sta_flags;
+
+	int generation;
+
+	const u8 *assoc_req_ies;
+	size_t assoc_req_ies_len;
+
+	u32 beacon_loss_count;
+
+	/*
+	 * Note: Add a new enum station_info_flags value for each new field and
+	 * use it to check which fields are initialized.
+	 */
+};
+
+/**
+ * enum monitor_flags - monitor flags
+ *
+ * Monitor interface configuration flags. Note that these must be the bits
+ * according to the nl80211 flags.
+ *
+ * @MONITOR_FLAG_FCSFAIL: pass frames with bad FCS
+ * @MONITOR_FLAG_PLCPFAIL: pass frames with bad PLCP
+ * @MONITOR_FLAG_CONTROL: pass control frames
+ * @MONITOR_FLAG_OTHER_BSS: disable BSSID filtering
+ * @MONITOR_FLAG_COOK_FRAMES: report frames after processing
+ */
+enum monitor_flags {
+	MONITOR_FLAG_FCSFAIL		= 1<<NL80211_MNTR_FLAG_FCSFAIL,
+	MONITOR_FLAG_PLCPFAIL		= 1<<NL80211_MNTR_FLAG_PLCPFAIL,
+	MONITOR_FLAG_CONTROL		= 1<<NL80211_MNTR_FLAG_CONTROL,
+	MONITOR_FLAG_OTHER_BSS		= 1<<NL80211_MNTR_FLAG_OTHER_BSS,
+	MONITOR_FLAG_COOK_FRAMES	= 1<<NL80211_MNTR_FLAG_COOK_FRAMES,
+};
+
+/**
+ * enum mpath_info_flags -  mesh path information flags
+ *
+ * Used by the driver to indicate which info in &struct mpath_info it has filled
+ * in during get_station() or dump_station().
+ *
+ * @MPATH_INFO_FRAME_QLEN: @frame_qlen filled
+ * @MPATH_INFO_SN: @sn filled
+ * @MPATH_INFO_METRIC: @metric filled
+ * @MPATH_INFO_EXPTIME: @exptime filled
+ * @MPATH_INFO_DISCOVERY_TIMEOUT: @discovery_timeout filled
+ * @MPATH_INFO_DISCOVERY_RETRIES: @discovery_retries filled
+ * @MPATH_INFO_FLAGS: @flags filled
+ */
+enum mpath_info_flags {
+	MPATH_INFO_FRAME_QLEN		= BIT(0),
+	MPATH_INFO_SN			= BIT(1),
+	MPATH_INFO_METRIC		= BIT(2),
+	MPATH_INFO_EXPTIME		= BIT(3),
+	MPATH_INFO_DISCOVERY_TIMEOUT	= BIT(4),
+	MPATH_INFO_DISCOVERY_RETRIES	= BIT(5),
+	MPATH_INFO_FLAGS		= BIT(6),
+};
+
+/**
+ * struct mpath_info - mesh path information
+ *
+ * Mesh path information filled by driver for get_mpath() and dump_mpath().
+ *
+ * @filled: bitfield of flags from &enum mpath_info_flags
+ * @frame_qlen: number of queued frames for this destination
+ * @sn: target sequence number
+ * @metric: metric (cost) of this mesh path
+ * @exptime: expiration time for the mesh path from now, in msecs
+ * @flags: mesh path flags
+ * @discovery_timeout: total mesh path discovery timeout, in msecs
+ * @discovery_retries: mesh path discovery retries
+ * @generation: generation number for nl80211 dumps.
+ *	This number should increase every time the list of mesh paths
+ *	changes, i.e. when a station is added or removed, so that
+ *	userspace can tell whether it got a consistent snapshot.
+ */
+struct mpath_info {
+	u32 filled;
+	u32 frame_qlen;
+	u32 sn;
+	u32 metric;
+	u32 exptime;
+	u32 discovery_timeout;
+	u8 discovery_retries;
+	u8 flags;
+
+	int generation;
+};
+
+/**
+ * struct bss_parameters - BSS parameters
+ *
+ * Used to change BSS parameters (mainly for AP mode).
+ *
+ * @use_cts_prot: Whether to use CTS protection
+ *	(0 = no, 1 = yes, -1 = do not change)
+ * @use_short_preamble: Whether the use of short preambles is allowed
+ *	(0 = no, 1 = yes, -1 = do not change)
+ * @use_short_slot_time: Whether the use of short slot time is allowed
+ *	(0 = no, 1 = yes, -1 = do not change)
+ * @basic_rates: basic rates in IEEE 802.11 format
+ *	(or NULL for no change)
+ * @basic_rates_len: number of basic rates
+ * @ap_isolate: do not forward packets between connected stations
+ * @ht_opmode: HT Operation mode
+ * 	(u16 = opmode, -1 = do not change)
+ */
+struct bss_parameters {
+	int use_cts_prot;
+	int use_short_preamble;
+	int use_short_slot_time;
+	u8 *basic_rates;
+	u8 basic_rates_len;
+	int ap_isolate;
+	int ht_opmode;
+};
+
+/*
+ * struct mesh_config - 802.11s mesh configuration
+ *
+ * These parameters can be changed while the mesh is active.
+ */
+struct mesh_config {
+	/* Timeouts in ms */
+	/* Mesh plink management parameters */
+	u16 dot11MeshRetryTimeout;
+	u16 dot11MeshConfirmTimeout;
+	u16 dot11MeshHoldingTimeout;
+	u16 dot11MeshMaxPeerLinks;
+	u8  dot11MeshMaxRetries;
+	u8  dot11MeshTTL;
+	/* ttl used in path selection information elements */
+	u8  element_ttl;
+	bool auto_open_plinks;
+	/* HWMP parameters */
+	u8  dot11MeshHWMPmaxPREQretries;
+	u32 path_refresh_time;
+	u16 min_discovery_timeout;
+	u32 dot11MeshHWMPactivePathTimeout;
+	u16 dot11MeshHWMPpreqMinInterval;
+	u16 dot11MeshHWMPperrMinInterval;
+	u16 dot11MeshHWMPnetDiameterTraversalTime;
+	u8  dot11MeshHWMPRootMode;
+	u16 dot11MeshHWMPRannInterval;
+	/* This is missnamed in draft 12.0: dot11MeshGateAnnouncementProtocol
+	 * set to true only means that the station will announce others it's a
+	 * mesh gate, but not necessarily using the gate announcement protocol.
+	 * Still keeping the same nomenclature to be in sync with the spec. */
+	bool  dot11MeshGateAnnouncementProtocol;
+	bool dot11MeshForwarding;
+	s32 rssi_threshold;
+};
+
+/**
+ * struct mesh_setup - 802.11s mesh setup configuration
+ * @mesh_id: the mesh ID
+ * @mesh_id_len: length of the mesh ID, at least 1 and at most 32 bytes
+ * @path_sel_proto: which path selection protocol to use
+ * @path_metric: which metric to use
+ * @ie: vendor information elements (optional)
+ * @ie_len: length of vendor information elements
+ * @is_authenticated: this mesh requires authentication
+ * @is_secure: this mesh uses security
+ * @mcast_rate: multicat rate for Mesh Node [6Mbps is the default for 802.11a]
+ *
+ * These parameters are fixed when the mesh is created.
+ */
+struct mesh_setup {
+	const u8 *mesh_id;
+	u8 mesh_id_len;
+	u8  path_sel_proto;
+	u8  path_metric;
+	const u8 *ie;
+	u8 ie_len;
+	bool is_authenticated;
+	bool is_secure;
+	int mcast_rate[IEEE80211_NUM_BANDS];
+};
+
+/**
+ * struct ieee80211_txq_params - TX queue parameters
+ * @queue: TX queue identifier (NL80211_TXQ_Q_*)
+ * @txop: Maximum burst time in units of 32 usecs, 0 meaning disabled
+ * @cwmin: Minimum contention window [a value of the form 2^n-1 in the range
+ *	1..32767]
+ * @cwmax: Maximum contention window [a value of the form 2^n-1 in the range
+ *	1..32767]
+ * @aifs: Arbitration interframe space [0..255]
+ */
+struct ieee80211_txq_params {
+	enum nl80211_txq_q queue;
+	u16 txop;
+	u16 cwmin;
+	u16 cwmax;
+	u8 aifs;
+};
+
+/* from net/wireless.h */
+struct wiphy;
+
+/**
+ * DOC: Scanning and BSS list handling
+ *
+ * The scanning process itself is fairly simple, but cfg80211 offers quite
+ * a bit of helper functionality. To start a scan, the scan operation will
+ * be invoked with a scan definition. This scan definition contains the
+ * channels to scan, and the SSIDs to send probe requests for (including the
+ * wildcard, if desired). A passive scan is indicated by having no SSIDs to
+ * probe. Additionally, a scan request may contain extra information elements
+ * that should be added to the probe request. The IEs are guaranteed to be
+ * well-formed, and will not exceed the maximum length the driver advertised
+ * in the wiphy structure.
+ *
+ * When scanning finds a BSS, cfg80211 needs to be notified of that, because
+ * it is responsible for maintaining the BSS list; the driver should not
+ * maintain a list itself. For this notification, various functions exist.
+ *
+ * Since drivers do not maintain a BSS list, there are also a number of
+ * functions to search for a BSS and obtain information about it from the
+ * BSS structure cfg80211 maintains. The BSS list is also made available
+ * to userspace.
+ */
+
+/**
+ * struct cfg80211_ssid - SSID description
+ * @ssid: the SSID
+ * @ssid_len: length of the ssid
+ */
+struct cfg80211_ssid {
+	u8 ssid[IEEE80211_MAX_SSID_LEN];
+	u8 ssid_len;
+};
+
+/**
+ * struct cfg80211_scan_request - scan request description
+ *
+ * @ssids: SSIDs to scan for (active scan only)
+ * @n_ssids: number of SSIDs
+ * @channels: channels to scan on.
+ * @n_channels: total number of channels to scan
+ * @ie: optional information element(s) to add into Probe Request or %NULL
+ * @ie_len: length of ie in octets
+ * @rates: bitmap of rates to advertise for each band
+ * @wiphy: the wiphy this was for
+ * @dev: the interface
+ * @aborted: (internal) scan request was notified as aborted
+ * @no_cck: used to send probe requests at non CCK rate in 2GHz band
+ */
+struct cfg80211_scan_request {
+	struct cfg80211_ssid *ssids;
+	int n_ssids;
+	u32 n_channels;
+	const u8 *ie;
+	size_t ie_len;
+
+	u32 rates[IEEE80211_NUM_BANDS];
+
+	/* internal */
+	struct wiphy *wiphy;
+	struct net_device *dev;
+	bool aborted;
+	bool no_cck;
+
+	/* keep last */
+	struct ieee80211_channel *channels[0];
+};
+
+/**
+ * struct cfg80211_match_set - sets of attributes to match
+ *
+ * @ssid: SSID to be matched
+ */
+struct cfg80211_match_set {
+	struct cfg80211_ssid ssid;
+};
+
+/**
+ * struct cfg80211_sched_scan_request - scheduled scan request description
+ *
+ * @ssids: SSIDs to scan for (passed in the probe_reqs in active scans)
+ * @n_ssids: number of SSIDs
+ * @n_channels: total number of channels to scan
+ * @interval: interval between each scheduled scan cycle
+ * @ie: optional information element(s) to add into Probe Request or %NULL
+ * @ie_len: length of ie in octets
+ * @match_sets: sets of parameters to be matched for a scan result
+ * 	entry to be considered valid and to be passed to the host
+ * 	(others are filtered out).
+ *	If ommited, all results are passed.
+ * @n_match_sets: number of match sets
+ * @wiphy: the wiphy this was for
+ * @dev: the interface
+ * @channels: channels to scan
+ */
+struct cfg80211_sched_scan_request {
+	struct cfg80211_ssid *ssids;
+	int n_ssids;
+	u32 n_channels;
+	u32 interval;
+	const u8 *ie;
+	size_t ie_len;
+	struct cfg80211_match_set *match_sets;
+	int n_match_sets;
+
+	/* internal */
+	struct wiphy *wiphy;
+	struct net_device *dev;
+
+	/* keep last */
+	struct ieee80211_channel *channels[0];
+};
+
+/**
+ * enum cfg80211_signal_type - signal type
+ *
+ * @CFG80211_SIGNAL_TYPE_NONE: no signal strength information available
+ * @CFG80211_SIGNAL_TYPE_MBM: signal strength in mBm (100*dBm)
+ * @CFG80211_SIGNAL_TYPE_UNSPEC: signal strength, increasing from 0 through 100
+ */
+enum cfg80211_signal_type {
+	CFG80211_SIGNAL_TYPE_NONE,
+	CFG80211_SIGNAL_TYPE_MBM,
+	CFG80211_SIGNAL_TYPE_UNSPEC,
+};
+
+/**
+ * struct cfg80211_bss - BSS description
+ *
+ * This structure describes a BSS (which may also be a mesh network)
+ * for use in scan results and similar.
+ *
+ * @channel: channel this BSS is on
+ * @bssid: BSSID of the BSS
+ * @tsf: timestamp of last received update
+ * @beacon_interval: the beacon interval as from the frame
+ * @capability: the capability field in host byte order
+ * @information_elements: the information elements (Note that there
+ *	is no guarantee that these are well-formed!); this is a pointer to
+ *	either the beacon_ies or proberesp_ies depending on whether Probe
+ *	Response frame has been received
+ * @len_information_elements: total length of the information elements
+ * @beacon_ies: the information elements from the last Beacon frame
+ * @len_beacon_ies: total length of the beacon_ies
+ * @proberesp_ies: the information elements from the last Probe Response frame
+ * @len_proberesp_ies: total length of the proberesp_ies
+ * @signal: signal strength value (type depends on the wiphy's signal_type)
+ * @free_priv: function pointer to free private data
+ * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes
+ */
+struct cfg80211_bss {
+	struct ieee80211_channel *channel;
+
+	u8 bssid[ETH_ALEN];
+	u64 tsf;
+	u16 beacon_interval;
+	u16 capability;
+	u8 *information_elements;
+	size_t len_information_elements;
+	u8 *beacon_ies;
+	size_t len_beacon_ies;
+	u8 *proberesp_ies;
+	size_t len_proberesp_ies;
+
+	s32 signal;
+
+	void (*free_priv)(struct cfg80211_bss *bss);
+	u8 priv[0] __attribute__((__aligned__(sizeof(void *))));
+};
+
+/**
+ * ieee80211_bss_get_ie - find IE with given ID
+ * @bss: the bss to search
+ * @ie: the IE ID
+ * Returns %NULL if not found.
+ */
+const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie);
+
+
+/**
+ * struct cfg80211_auth_request - Authentication request data
+ *
+ * This structure provides information needed to complete IEEE 802.11
+ * authentication.
+ *
+ * @bss: The BSS to authenticate with.
+ * @auth_type: Authentication type (algorithm)
+ * @ie: Extra IEs to add to Authentication frame or %NULL
+ * @ie_len: Length of ie buffer in octets
+ * @key_len: length of WEP key for shared key authentication
+ * @key_idx: index of WEP key for shared key authentication
+ * @key: WEP key for shared key authentication
+ */
+struct cfg80211_auth_request {
+	struct cfg80211_bss *bss;
+	const u8 *ie;
+	size_t ie_len;
+	enum nl80211_auth_type auth_type;
+	const u8 *key;
+	u8 key_len, key_idx;
+};
+
+/**
+ * enum cfg80211_assoc_req_flags - Over-ride default behaviour in association.
+ *
+ * @ASSOC_REQ_DISABLE_HT:  Disable HT (802.11n)
+ */
+enum cfg80211_assoc_req_flags {
+	ASSOC_REQ_DISABLE_HT		= BIT(0),
+};
+
+/**
+ * struct cfg80211_assoc_request - (Re)Association request data
+ *
+ * This structure provides information needed to complete IEEE 802.11
+ * (re)association.
+ * @bss: The BSS to associate with. If the call is successful the driver
+ *	is given a reference that it must release, normally via a call to
+ *	cfg80211_send_rx_assoc(), or, if association timed out, with a
+ *	call to cfg80211_put_bss() (in addition to calling
+ *	cfg80211_send_assoc_timeout())
+ * @ie: Extra IEs to add to (Re)Association Request frame or %NULL
+ * @ie_len: Length of ie buffer in octets
+ * @use_mfp: Use management frame protection (IEEE 802.11w) in this association
+ * @crypto: crypto settings
+ * @prev_bssid: previous BSSID, if not %NULL use reassociate frame
+ * @flags:  See &enum cfg80211_assoc_req_flags
+ * @ht_capa:  HT Capabilities over-rides.  Values set in ht_capa_mask
+ *   will be used in ht_capa.  Un-supported values will be ignored.
+ * @ht_capa_mask:  The bits of ht_capa which are to be used.
+ */
+struct cfg80211_assoc_request {
+	struct cfg80211_bss *bss;
+	const u8 *ie, *prev_bssid;
+	size_t ie_len;
+	struct cfg80211_crypto_settings crypto;
+	bool use_mfp;
+	u32 flags;
+	struct ieee80211_ht_cap ht_capa;
+	struct ieee80211_ht_cap ht_capa_mask;
+};
+
+/**
+ * struct cfg80211_deauth_request - Deauthentication request data
+ *
+ * This structure provides information needed to complete IEEE 802.11
+ * deauthentication.
+ *
+ * @bssid: the BSSID of the BSS to deauthenticate from
+ * @ie: Extra IEs to add to Deauthentication frame or %NULL
+ * @ie_len: Length of ie buffer in octets
+ * @reason_code: The reason code for the deauthentication
+ */
+struct cfg80211_deauth_request {
+	const u8 *bssid;
+	const u8 *ie;
+	size_t ie_len;
+	u16 reason_code;
+};
+
+/**
+ * struct cfg80211_disassoc_request - Disassociation request data
+ *
+ * This structure provides information needed to complete IEEE 802.11
+ * disassocation.
+ *
+ * @bss: the BSS to disassociate from
+ * @ie: Extra IEs to add to Disassociation frame or %NULL
+ * @ie_len: Length of ie buffer in octets
+ * @reason_code: The reason code for the disassociation
+ * @local_state_change: This is a request for a local state only, i.e., no
+ *	Disassociation frame is to be transmitted.
+ */
+struct cfg80211_disassoc_request {
+	struct cfg80211_bss *bss;
+	const u8 *ie;
+	size_t ie_len;
+	u16 reason_code;
+	bool local_state_change;
+};
+
+/**
+ * struct cfg80211_ibss_params - IBSS parameters
+ *
+ * This structure defines the IBSS parameters for the join_ibss()
+ * method.
+ *
+ * @ssid: The SSID, will always be non-null.
+ * @ssid_len: The length of the SSID, will always be non-zero.
+ * @bssid: Fixed BSSID requested, maybe be %NULL, if set do not
+ *	search for IBSSs with a different BSSID.
+ * @channel: The channel to use if no IBSS can be found to join.
+ * @channel_type: channel type (HT mode)
+ * @channel_fixed: The channel should be fixed -- do not search for
+ *	IBSSs to join on other channels.
+ * @ie: information element(s) to include in the beacon
+ * @ie_len: length of that
+ * @beacon_interval: beacon interval to use
+ * @privacy: this is a protected network, keys will be configured
+ *	after joining
+ * @control_port: whether user space controls IEEE 802.1X port, i.e.,
+ *	sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is
+ *	required to assume that the port is unauthorized until authorized by
+ *	user space. Otherwise, port is marked authorized by default.
+ * @basic_rates: bitmap of basic rates to use when creating the IBSS
+ * @mcast_rate: per-band multicast rate index + 1 (0: disabled)
+ */
+struct cfg80211_ibss_params {
+	u8 *ssid;
+	u8 *bssid;
+	struct ieee80211_channel *channel;
+	enum nl80211_channel_type channel_type;
+	u8 *ie;
+	u8 ssid_len, ie_len;
+	u16 beacon_interval;
+	u32 basic_rates;
+	bool channel_fixed;
+	bool privacy;
+	bool control_port;
+	int mcast_rate[IEEE80211_NUM_BANDS];
+};
+
+/**
+ * struct cfg80211_connect_params - Connection parameters
+ *
+ * This structure provides information needed to complete IEEE 802.11
+ * authentication and association.
+ *
+ * @channel: The channel to use or %NULL if not specified (auto-select based
+ *	on scan results)
+ * @bssid: The AP BSSID or %NULL if not specified (auto-select based on scan
+ *	results)
+ * @ssid: SSID
+ * @ssid_len: Length of ssid in octets
+ * @auth_type: Authentication type (algorithm)
+ * @ie: IEs for association request
+ * @ie_len: Length of assoc_ie in octets
+ * @privacy: indicates whether privacy-enabled APs should be used
+ * @crypto: crypto settings
+ * @key_len: length of WEP key for shared key authentication
+ * @key_idx: index of WEP key for shared key authentication
+ * @key: WEP key for shared key authentication
+ * @flags:  See &enum cfg80211_assoc_req_flags
+ * @bg_scan_period:  Background scan period in seconds
+ *   or -1 to indicate that default value is to be used.
+ * @ht_capa:  HT Capabilities over-rides.  Values set in ht_capa_mask
+ *   will be used in ht_capa.  Un-supported values will be ignored.
+ * @ht_capa_mask:  The bits of ht_capa which are to be used.
+ */
+struct cfg80211_connect_params {
+	struct ieee80211_channel *channel;
+	u8 *bssid;
+	u8 *ssid;
+	size_t ssid_len;
+	enum nl80211_auth_type auth_type;
+	u8 *ie;
+	size_t ie_len;
+	bool privacy;
+	struct cfg80211_crypto_settings crypto;
+	const u8 *key;
+	u8 key_len, key_idx;
+	u32 flags;
+	int bg_scan_period;
+	struct ieee80211_ht_cap ht_capa;
+	struct ieee80211_ht_cap ht_capa_mask;
+};
+
+/**
+ * enum wiphy_params_flags - set_wiphy_params bitfield values
+ * @WIPHY_PARAM_RETRY_SHORT: wiphy->retry_short has changed
+ * @WIPHY_PARAM_RETRY_LONG: wiphy->retry_long has changed
+ * @WIPHY_PARAM_FRAG_THRESHOLD: wiphy->frag_threshold has changed
+ * @WIPHY_PARAM_RTS_THRESHOLD: wiphy->rts_threshold has changed
+ * @WIPHY_PARAM_COVERAGE_CLASS: coverage class changed
+ */
+enum wiphy_params_flags {
+	WIPHY_PARAM_RETRY_SHORT		= 1 << 0,
+	WIPHY_PARAM_RETRY_LONG		= 1 << 1,
+	WIPHY_PARAM_FRAG_THRESHOLD	= 1 << 2,
+	WIPHY_PARAM_RTS_THRESHOLD	= 1 << 3,
+	WIPHY_PARAM_COVERAGE_CLASS	= 1 << 4,
+};
+
+/*
+ * cfg80211_bitrate_mask - masks for bitrate control
+ */
+struct cfg80211_bitrate_mask {
+	struct {
+		u32 legacy;
+		u8 mcs[IEEE80211_HT_MCS_MASK_LEN];
+	} control[IEEE80211_NUM_BANDS];
+};
+/**
+ * struct cfg80211_pmksa - PMK Security Association
+ *
+ * This structure is passed to the set/del_pmksa() method for PMKSA
+ * caching.
+ *
+ * @bssid: The AP's BSSID.
+ * @pmkid: The PMK material itself.
+ */
+struct cfg80211_pmksa {
+	u8 *bssid;
+	u8 *pmkid;
+};
+
+/**
+ * struct cfg80211_wowlan_trig_pkt_pattern - packet pattern
+ * @mask: bitmask where to match pattern and where to ignore bytes,
+ *	one bit per byte, in same format as nl80211
+ * @pattern: bytes to match where bitmask is 1
+ * @pattern_len: length of pattern (in bytes)
+ *
+ * Internal note: @mask and @pattern are allocated in one chunk of
+ * memory, free @mask only!
+ */
+struct cfg80211_wowlan_trig_pkt_pattern {
+	u8 *mask, *pattern;
+	int pattern_len;
+};
+
+/**
+ * struct cfg80211_wowlan - Wake on Wireless-LAN support info
+ *
+ * This structure defines the enabled WoWLAN triggers for the device.
+ * @any: wake up on any activity -- special trigger if device continues
+ *	operating as normal during suspend
+ * @disconnect: wake up if getting disconnected
+ * @magic_pkt: wake up on receiving magic packet
+ * @patterns: wake up on receiving packet matching a pattern
+ * @n_patterns: number of patterns
+ * @gtk_rekey_failure: wake up on GTK rekey failure
+ * @eap_identity_req: wake up on EAP identity request packet
+ * @four_way_handshake: wake up on 4-way handshake
+ * @rfkill_release: wake up when rfkill is released
+ */
+struct cfg80211_wowlan {
+	bool any, disconnect, magic_pkt, gtk_rekey_failure,
+	     eap_identity_req, four_way_handshake,
+	     rfkill_release;
+	struct cfg80211_wowlan_trig_pkt_pattern *patterns;
+	int n_patterns;
+};
+
+/**
+ * struct cfg80211_gtk_rekey_data - rekey data
+ * @kek: key encryption key
+ * @kck: key confirmation key
+ * @replay_ctr: replay counter
+ */
+struct cfg80211_gtk_rekey_data {
+	u8 kek[NL80211_KEK_LEN];
+	u8 kck[NL80211_KCK_LEN];
+	u8 replay_ctr[NL80211_REPLAY_CTR_LEN];
+};
+
+/**
+ * struct cfg80211_ops - backend description for wireless configuration
+ *
+ * This struct is registered by fullmac card drivers and/or wireless stacks
+ * in order to handle configuration requests on their interfaces.
+ *
+ * All callbacks except where otherwise noted should return 0
+ * on success or a negative error code.
+ *
+ * All operations are currently invoked under rtnl for consistency with the
+ * wireless extensions but this is subject to reevaluation as soon as this
+ * code is used more widely and we have a first user without wext.
+ *
+ * @suspend: wiphy device needs to be suspended. The variable @wow will
+ *	be %NULL or contain the enabled Wake-on-Wireless triggers that are
+ *	configured for the device.
+ * @resume: wiphy device needs to be resumed
+ *
+ * @add_virtual_intf: create a new virtual interface with the given name,
+ *	must set the struct wireless_dev's iftype. Beware: You must create
+ *	the new netdev in the wiphy's network namespace! Returns the netdev,
+ *	or an ERR_PTR.
+ *
+ * @del_virtual_intf: remove the virtual interface determined by ifindex.
+ *
+ * @change_virtual_intf: change type/configuration of virtual interface,
+ *	keep the struct wireless_dev's iftype updated.
+ *
+ * @add_key: add a key with the given parameters. @mac_addr will be %NULL
+ *	when adding a group key.
+ *
+ * @get_key: get information about the key with the given parameters.
+ *	@mac_addr will be %NULL when requesting information for a group
+ *	key. All pointers given to the @callback function need not be valid
+ *	after it returns. This function should return an error if it is
+ *	not possible to retrieve the key, -ENOENT if it doesn't exist.
+ *
+ * @del_key: remove a key given the @mac_addr (%NULL for a group key)
+ *	and @key_index, return -ENOENT if the key doesn't exist.
+ *
+ * @set_default_key: set the default key on an interface
+ *
+ * @set_default_mgmt_key: set the default management frame key on an interface
+ *
+ * @set_rekey_data: give the data necessary for GTK rekeying to the driver
+ *
+ * @start_ap: Start acting in AP mode defined by the parameters.
+ * @change_beacon: Change the beacon parameters for an access point mode
+ *	interface. This should reject the call when AP mode wasn't started.
+ * @stop_ap: Stop being an AP, including stopping beaconing.
+ *
+ * @add_station: Add a new station.
+ * @del_station: Remove a station; @mac may be NULL to remove all stations.
+ * @change_station: Modify a given station. Note that flags changes are not much
+ *	validated in cfg80211, in particular the auth/assoc/authorized flags
+ *	might come to the driver in invalid combinations -- make sure to check
+ *	them, also against the existing state! Also, supported_rates changes are
+ *	not checked in station mode -- drivers need to reject (or ignore) them
+ *	for anything but TDLS peers.
+ * @get_station: get station information for the station identified by @mac
+ * @dump_station: dump station callback -- resume dump at index @idx
+ *
+ * @add_mpath: add a fixed mesh path
+ * @del_mpath: delete a given mesh path
+ * @change_mpath: change a given mesh path
+ * @get_mpath: get a mesh path for the given parameters
+ * @dump_mpath: dump mesh path callback -- resume dump at index @idx
+ * @join_mesh: join the mesh network with the specified parameters
+ * @leave_mesh: leave the current mesh network
+ *
+ * @get_mesh_config: Get the current mesh configuration
+ *
+ * @update_mesh_config: Update mesh parameters on a running mesh.
+ *	The mask is a bitfield which tells us which parameters to
+ *	set, and which to leave alone.
+ *
+ * @change_bss: Modify parameters for a given BSS.
+ *
+ * @set_txq_params: Set TX queue parameters
+ *
+ * @set_channel: Set channel for a given wireless interface. Some devices
+ *	may support multi-channel operation (by channel hopping) so cfg80211
+ *	doesn't verify much. Note, however, that the passed netdev may be
+ *	%NULL as well if the user requested changing the channel for the
+ *	device itself, or for a monitor interface.
+ * @get_channel: Get the current operating channel, should return %NULL if
+ *	there's no single defined operating channel if for example the
+ *	device implements channel hopping for multi-channel virtual interfaces.
+ *
+ * @scan: Request to do a scan. If returning zero, the scan request is given
+ *	the driver, and will be valid until passed to cfg80211_scan_done().
+ *	For scan results, call cfg80211_inform_bss(); you can call this outside
+ *	the scan/scan_done bracket too.
+ *
+ * @auth: Request to authenticate with the specified peer
+ * @assoc: Request to (re)associate with the specified peer
+ * @deauth: Request to deauthenticate from the specified peer
+ * @disassoc: Request to disassociate from the specified peer
+ *
+ * @connect: Connect to the ESS with the specified parameters. When connected,
+ *	call cfg80211_connect_result() with status code %WLAN_STATUS_SUCCESS.
+ *	If the connection fails for some reason, call cfg80211_connect_result()
+ *	with the status from the AP.
+ * @disconnect: Disconnect from the BSS/ESS.
+ *
+ * @join_ibss: Join the specified IBSS (or create if necessary). Once done, call
+ *	cfg80211_ibss_joined(), also call that function when changing BSSID due
+ *	to a merge.
+ * @leave_ibss: Leave the IBSS.
+ *
+ * @set_wiphy_params: Notify that wiphy parameters have changed;
+ *	@changed bitfield (see &enum wiphy_params_flags) describes which values
+ *	have changed. The actual parameter values are available in
+ *	struct wiphy. If returning an error, no value should be changed.
+ *
+ * @set_tx_power: set the transmit power according to the parameters,
+ *	the power passed is in mBm, to get dBm use MBM_TO_DBM().
+ * @get_tx_power: store the current TX power into the dbm variable;
+ *	return 0 if successful
+ *
+ * @set_wds_peer: set the WDS peer for a WDS interface
+ *
+ * @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting
+ *	functions to adjust rfkill hw state
+ *
+ * @dump_survey: get site survey information.
+ *
+ * @remain_on_channel: Request the driver to remain awake on the specified
+ *	channel for the specified duration to complete an off-channel
+ *	operation (e.g., public action frame exchange). When the driver is
+ *	ready on the requested channel, it must indicate this with an event
+ *	notification by calling cfg80211_ready_on_channel().
+ * @cancel_remain_on_channel: Cancel an on-going remain-on-channel operation.
+ *	This allows the operation to be terminated prior to timeout based on
+ *	the duration value.
+ * @mgmt_tx: Transmit a management frame.
+ * @mgmt_tx_cancel_wait: Cancel the wait time from transmitting a management
+ *	frame on another channel
+ *
+ * @testmode_cmd: run a test mode command
+ * @testmode_dump: Implement a test mode dump. The cb->args[2] and up may be
+ *	used by the function, but 0 and 1 must not be touched. Additionally,
+ *	return error codes other than -ENOBUFS and -ENOENT will terminate the
+ *	dump and return to userspace with an error, so be careful. If any data
+ *	was passed in from userspace then the data/len arguments will be present
+ *	and point to the data contained in %NL80211_ATTR_TESTDATA.
+ *
+ * @set_bitrate_mask: set the bitrate mask configuration
+ *
+ * @set_pmksa: Cache a PMKID for a BSSID. This is mostly useful for fullmac
+ *	devices running firmwares capable of generating the (re) association
+ *	RSN IE. It allows for faster roaming between WPA2 BSSIDs.
+ * @del_pmksa: Delete a cached PMKID.
+ * @flush_pmksa: Flush all cached PMKIDs.
+ * @set_power_mgmt: Configure WLAN power management. A timeout value of -1
+ *	allows the driver to adjust the dynamic ps timeout value.
+ * @set_cqm_rssi_config: Configure connection quality monitor RSSI threshold.
+ * @sched_scan_start: Tell the driver to start a scheduled scan.
+ * @sched_scan_stop: Tell the driver to stop an ongoing scheduled
+ *	scan.  The driver_initiated flag specifies whether the driver
+ *	itself has informed that the scan has stopped.
+ *
+ * @mgmt_frame_register: Notify driver that a management frame type was
+ *	registered. Note that this callback may not sleep, and cannot run
+ *	concurrently with itself.
+ *
+ * @set_antenna: Set antenna configuration (tx_ant, rx_ant) on the device.
+ *	Parameters are bitmaps of allowed antennas to use for TX/RX. Drivers may
+ *	reject TX/RX mask combinations they cannot support by returning -EINVAL
+ *	(also see nl80211.h @NL80211_ATTR_WIPHY_ANTENNA_TX).
+ *
+ * @get_antenna: Get current antenna configuration from device (tx_ant, rx_ant).
+ *
+ * @set_ringparam: Set tx and rx ring sizes.
+ *
+ * @get_ringparam: Get tx and rx ring current and maximum sizes.
+ *
+ * @tdls_mgmt: Transmit a TDLS management frame.
+ * @tdls_oper: Perform a high-level TDLS operation (e.g. TDLS link setup).
+ *
+ * @probe_client: probe an associated client, must return a cookie that it
+ *	later passes to cfg80211_probe_status().
+ *
+ * @set_noack_map: Set the NoAck Map for the TIDs.
+ */
+struct cfg80211_ops {
+	int	(*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
+	int	(*resume)(struct wiphy *wiphy);
+
+	struct net_device * (*add_virtual_intf)(struct wiphy *wiphy,
+						char *name,
+						enum nl80211_iftype type,
+						u32 *flags,
+						struct vif_params *params);
+	int	(*del_virtual_intf)(struct wiphy *wiphy, struct net_device *dev);
+	int	(*change_virtual_intf)(struct wiphy *wiphy,
+				       struct net_device *dev,
+				       enum nl80211_iftype type, u32 *flags,
+				       struct vif_params *params);
+
+	int	(*add_key)(struct wiphy *wiphy, struct net_device *netdev,
+			   u8 key_index, bool pairwise, const u8 *mac_addr,
+			   struct key_params *params);
+	int	(*get_key)(struct wiphy *wiphy, struct net_device *netdev,
+			   u8 key_index, bool pairwise, const u8 *mac_addr,
+			   void *cookie,
+			   void (*callback)(void *cookie, struct key_params*));
+	int	(*del_key)(struct wiphy *wiphy, struct net_device *netdev,
+			   u8 key_index, bool pairwise, const u8 *mac_addr);
+	int	(*set_default_key)(struct wiphy *wiphy,
+				   struct net_device *netdev,
+				   u8 key_index, bool unicast, bool multicast);
+	int	(*set_default_mgmt_key)(struct wiphy *wiphy,
+					struct net_device *netdev,
+					u8 key_index);
+
+	int	(*start_ap)(struct wiphy *wiphy, struct net_device *dev,
+			    struct cfg80211_ap_settings *settings);
+	int	(*change_beacon)(struct wiphy *wiphy, struct net_device *dev,
+				 struct cfg80211_beacon_data *info);
+	int	(*stop_ap)(struct wiphy *wiphy, struct net_device *dev);
+
+
+	int	(*add_station)(struct wiphy *wiphy, struct net_device *dev,
+			       u8 *mac, struct station_parameters *params);
+	int	(*del_station)(struct wiphy *wiphy, struct net_device *dev,
+			       u8 *mac);
+	int	(*change_station)(struct wiphy *wiphy, struct net_device *dev,
+				  u8 *mac, struct station_parameters *params);
+	int	(*get_station)(struct wiphy *wiphy, struct net_device *dev,
+			       u8 *mac, struct station_info *sinfo);
+	int	(*dump_station)(struct wiphy *wiphy, struct net_device *dev,
+			       int idx, u8 *mac, struct station_info *sinfo);
+
+	int	(*add_mpath)(struct wiphy *wiphy, struct net_device *dev,
+			       u8 *dst, u8 *next_hop);
+	int	(*del_mpath)(struct wiphy *wiphy, struct net_device *dev,
+			       u8 *dst);
+	int	(*change_mpath)(struct wiphy *wiphy, struct net_device *dev,
+				  u8 *dst, u8 *next_hop);
+	int	(*get_mpath)(struct wiphy *wiphy, struct net_device *dev,
+			       u8 *dst, u8 *next_hop,
+			       struct mpath_info *pinfo);
+	int	(*dump_mpath)(struct wiphy *wiphy, struct net_device *dev,
+			       int idx, u8 *dst, u8 *next_hop,
+			       struct mpath_info *pinfo);
+	int	(*get_mesh_config)(struct wiphy *wiphy,
+				struct net_device *dev,
+				struct mesh_config *conf);
+	int	(*update_mesh_config)(struct wiphy *wiphy,
+				      struct net_device *dev, u32 mask,
+				      const struct mesh_config *nconf);
+	int	(*join_mesh)(struct wiphy *wiphy, struct net_device *dev,
+			     const struct mesh_config *conf,
+			     const struct mesh_setup *setup);
+	int	(*leave_mesh)(struct wiphy *wiphy, struct net_device *dev);
+
+	int	(*change_bss)(struct wiphy *wiphy, struct net_device *dev,
+			      struct bss_parameters *params);
+
+	int	(*set_txq_params)(struct wiphy *wiphy, struct net_device *dev,
+				  struct ieee80211_txq_params *params);
+
+	int	(*set_channel)(struct wiphy *wiphy, struct net_device *dev,
+			       struct ieee80211_channel *chan,
+			       enum nl80211_channel_type channel_type);
+
+	int	(*scan)(struct wiphy *wiphy, struct net_device *dev,
+			struct cfg80211_scan_request *request);
+
+	int	(*auth)(struct wiphy *wiphy, struct net_device *dev,
+			struct cfg80211_auth_request *req);
+	int	(*assoc)(struct wiphy *wiphy, struct net_device *dev,
+			 struct cfg80211_assoc_request *req);
+	int	(*deauth)(struct wiphy *wiphy, struct net_device *dev,
+			  struct cfg80211_deauth_request *req);
+	int	(*disassoc)(struct wiphy *wiphy, struct net_device *dev,
+			    struct cfg80211_disassoc_request *req);
+
+	int	(*connect)(struct wiphy *wiphy, struct net_device *dev,
+			   struct cfg80211_connect_params *sme);
+	int	(*disconnect)(struct wiphy *wiphy, struct net_device *dev,
+			      u16 reason_code);
+
+	int	(*join_ibss)(struct wiphy *wiphy, struct net_device *dev,
+			     struct cfg80211_ibss_params *params);
+	int	(*leave_ibss)(struct wiphy *wiphy, struct net_device *dev);
+
+	int	(*set_wiphy_params)(struct wiphy *wiphy, u32 changed);
+
+	int	(*set_tx_power)(struct wiphy *wiphy,
+				enum nl80211_tx_power_setting type, int mbm);
+	int	(*get_tx_power)(struct wiphy *wiphy, int *dbm);
+
+	int	(*set_wds_peer)(struct wiphy *wiphy, struct net_device *dev,
+				const u8 *addr);
+
+	void	(*rfkill_poll)(struct wiphy *wiphy);
+
+#ifdef CONFIG_NL80211_TESTMODE
+	int	(*testmode_cmd)(struct wiphy *wiphy, void *data, int len);
+	int	(*testmode_dump)(struct wiphy *wiphy, struct sk_buff *skb,
+				 struct netlink_callback *cb,
+				 void *data, int len);
+#endif
+
+	int	(*set_bitrate_mask)(struct wiphy *wiphy,
+				    struct net_device *dev,
+				    const u8 *peer,
+				    const struct cfg80211_bitrate_mask *mask);
+
+	int	(*dump_survey)(struct wiphy *wiphy, struct net_device *netdev,
+			int idx, struct survey_info *info);
+
+	int	(*set_pmksa)(struct wiphy *wiphy, struct net_device *netdev,
+			     struct cfg80211_pmksa *pmksa);
+	int	(*del_pmksa)(struct wiphy *wiphy, struct net_device *netdev,
+			     struct cfg80211_pmksa *pmksa);
+	int	(*flush_pmksa)(struct wiphy *wiphy, struct net_device *netdev);
+
+	int	(*remain_on_channel)(struct wiphy *wiphy,
+				     struct net_device *dev,
+				     struct ieee80211_channel *chan,
+				     enum nl80211_channel_type channel_type,
+				     unsigned int duration,
+				     u64 *cookie);
+	int	(*cancel_remain_on_channel)(struct wiphy *wiphy,
+					    struct net_device *dev,
+					    u64 cookie);
+
+	int	(*mgmt_tx)(struct wiphy *wiphy, struct net_device *dev,
+			  struct ieee80211_channel *chan, bool offchan,
+			  enum nl80211_channel_type channel_type,
+			  bool channel_type_valid, unsigned int wait,
+			  const u8 *buf, size_t len, bool no_cck,
+			  bool dont_wait_for_ack, u64 *cookie);
+	int	(*mgmt_tx_cancel_wait)(struct wiphy *wiphy,
+				       struct net_device *dev,
+				       u64 cookie);
+
+	int	(*set_power_mgmt)(struct wiphy *wiphy, struct net_device *dev,
+				  bool enabled, int timeout);
+
+	int	(*set_cqm_rssi_config)(struct wiphy *wiphy,
+				       struct net_device *dev,
+				       s32 rssi_thold, u32 rssi_hyst);
+
+	void	(*mgmt_frame_register)(struct wiphy *wiphy,
+				       struct net_device *dev,
+				       u16 frame_type, bool reg);
+
+	int	(*set_antenna)(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant);
+	int	(*get_antenna)(struct wiphy *wiphy, u32 *tx_ant, u32 *rx_ant);
+
+	int	(*set_ringparam)(struct wiphy *wiphy, u32 tx, u32 rx);
+	void	(*get_ringparam)(struct wiphy *wiphy,
+				 u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max);
+
+	int	(*sched_scan_start)(struct wiphy *wiphy,
+				struct net_device *dev,
+				struct cfg80211_sched_scan_request *request);
+	int	(*sched_scan_stop)(struct wiphy *wiphy, struct net_device *dev);
+
+	int	(*set_rekey_data)(struct wiphy *wiphy, struct net_device *dev,
+				  struct cfg80211_gtk_rekey_data *data);
+
+	int	(*tdls_mgmt)(struct wiphy *wiphy, struct net_device *dev,
+			     u8 *peer, u8 action_code,  u8 dialog_token,
+			     u16 status_code, const u8 *buf, size_t len);
+	int	(*tdls_oper)(struct wiphy *wiphy, struct net_device *dev,
+			     u8 *peer, enum nl80211_tdls_operation oper);
+
+	int	(*probe_client)(struct wiphy *wiphy, struct net_device *dev,
+				const u8 *peer, u64 *cookie);
+
+	int	(*set_noack_map)(struct wiphy *wiphy,
+				  struct net_device *dev,
+				  u16 noack_map);
+
+	struct ieee80211_channel *(*get_channel)(struct wiphy *wiphy);
+};
+
+/*
+ * wireless hardware and networking interfaces structures
+ * and registration/helper functions
+ */
+
+/**
+ * enum wiphy_flags - wiphy capability flags
+ *
+ * @WIPHY_FLAG_CUSTOM_REGULATORY:  tells us the driver for this device
+ * 	has its own custom regulatory domain and cannot identify the
+ * 	ISO / IEC 3166 alpha2 it belongs to. When this is enabled
+ * 	we will disregard the first regulatory hint (when the
+ * 	initiator is %REGDOM_SET_BY_CORE).
+ * @WIPHY_FLAG_STRICT_REGULATORY: tells us the driver for this device will
+ *	ignore regulatory domain settings until it gets its own regulatory
+ *	domain via its regulatory_hint() unless the regulatory hint is
+ *	from a country IE. After its gets its own regulatory domain it will
+ *	only allow further regulatory domain settings to further enhance
+ *	compliance. For example if channel 13 and 14 are disabled by this
+ *	regulatory domain no user regulatory domain can enable these channels
+ *	at a later time. This can be used for devices which do not have
+ *	calibration information guaranteed for frequencies or settings
+ *	outside of its regulatory domain. If used in combination with
+ *	WIPHY_FLAG_CUSTOM_REGULATORY the inspected country IE power settings
+ *	will be followed.
+ * @WIPHY_FLAG_DISABLE_BEACON_HINTS: enable this if your driver needs to ensure
+ *	that passive scan flags and beaconing flags may not be lifted by
+ *	cfg80211 due to regulatory beacon hints. For more information on beacon
+ *	hints read the documenation for regulatory_hint_found_beacon()
+ * @WIPHY_FLAG_NETNS_OK: if not set, do not allow changing the netns of this
+ *	wiphy at all
+ * @WIPHY_FLAG_ENFORCE_COMBINATIONS: Set this flag to enforce interface
+ *	combinations for this device. This flag is used for backward
+ *	compatibility only until all drivers advertise combinations and
+ *	they will always be enforced.
+ * @WIPHY_FLAG_PS_ON_BY_DEFAULT: if set to true, powersave will be enabled
+ *	by default -- this flag will be set depending on the kernel's default
+ *	on wiphy_new(), but can be changed by the driver if it has a good
+ *	reason to override the default
+ * @WIPHY_FLAG_4ADDR_AP: supports 4addr mode even on AP (with a single station
+ *	on a VLAN interface)
+ * @WIPHY_FLAG_4ADDR_STATION: supports 4addr mode even as a station
+ * @WIPHY_FLAG_CONTROL_PORT_PROTOCOL: This device supports setting the
+ *	control port protocol ethertype. The device also honours the
+ *	control_port_no_encrypt flag.
+ * @WIPHY_FLAG_IBSS_RSN: The device supports IBSS RSN.
+ * @WIPHY_FLAG_MESH_AUTH: The device supports mesh authentication by routing
+ *	auth frames to userspace. See @NL80211_MESH_SETUP_USERSPACE_AUTH.
+ * @WIPHY_FLAG_SUPPORTS_SCHED_SCAN: The device supports scheduled scans.
+ * @WIPHY_FLAG_SUPPORTS_FW_ROAM: The device supports roaming feature in the
+ *	firmware.
+ * @WIPHY_FLAG_AP_UAPSD: The device supports uapsd on AP.
+ * @WIPHY_FLAG_SUPPORTS_TDLS: The device supports TDLS (802.11z) operation.
+ * @WIPHY_FLAG_TDLS_EXTERNAL_SETUP: The device does not handle TDLS (802.11z)
+ *	link setup/discovery operations internally. Setup, discovery and
+ *	teardown packets should be sent through the @NL80211_CMD_TDLS_MGMT
+ *	command. When this flag is not set, @NL80211_CMD_TDLS_OPER should be
+ *	used for asking the driver/firmware to perform a TDLS operation.
+ * @WIPHY_FLAG_HAVE_AP_SME: device integrates AP SME
+ * @WIPHY_FLAG_REPORTS_OBSS: the device will report beacons from other BSSes
+ *	when there are virtual interfaces in AP mode by calling
+ *	cfg80211_report_obss_beacon().
+ * @WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD: When operating as an AP, the device
+ *	responds to probe-requests in hardware.
+ * @WIPHY_FLAG_OFFCHAN_TX: Device supports direct off-channel TX.
+ * @WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL: Device supports remain-on-channel call.
+ */
+enum wiphy_flags {
+	WIPHY_FLAG_CUSTOM_REGULATORY		= BIT(0),
+	WIPHY_FLAG_STRICT_REGULATORY		= BIT(1),
+	WIPHY_FLAG_DISABLE_BEACON_HINTS		= BIT(2),
+	WIPHY_FLAG_NETNS_OK			= BIT(3),
+	WIPHY_FLAG_PS_ON_BY_DEFAULT		= BIT(4),
+	WIPHY_FLAG_4ADDR_AP			= BIT(5),
+	WIPHY_FLAG_4ADDR_STATION		= BIT(6),
+	WIPHY_FLAG_CONTROL_PORT_PROTOCOL	= BIT(7),
+	WIPHY_FLAG_IBSS_RSN			= BIT(8),
+	WIPHY_FLAG_MESH_AUTH			= BIT(10),
+	WIPHY_FLAG_SUPPORTS_SCHED_SCAN		= BIT(11),
+	WIPHY_FLAG_ENFORCE_COMBINATIONS		= BIT(12),
+	WIPHY_FLAG_SUPPORTS_FW_ROAM		= BIT(13),
+	WIPHY_FLAG_AP_UAPSD			= BIT(14),
+	WIPHY_FLAG_SUPPORTS_TDLS		= BIT(15),
+	WIPHY_FLAG_TDLS_EXTERNAL_SETUP		= BIT(16),
+	WIPHY_FLAG_HAVE_AP_SME			= BIT(17),
+	WIPHY_FLAG_REPORTS_OBSS			= BIT(18),
+	WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD	= BIT(19),
+	WIPHY_FLAG_OFFCHAN_TX			= BIT(20),
+	WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL	= BIT(21),
+};
+
+/**
+ * struct ieee80211_iface_limit - limit on certain interface types
+ * @max: maximum number of interfaces of these types
+ * @types: interface types (bits)
+ */
+struct ieee80211_iface_limit {
+	u16 max;
+	u16 types;
+};
+
+/**
+ * struct ieee80211_iface_combination - possible interface combination
+ * @limits: limits for the given interface types
+ * @n_limits: number of limitations
+ * @num_different_channels: can use up to this many different channels
+ * @max_interfaces: maximum number of interfaces in total allowed in this
+ *	group
+ * @beacon_int_infra_match: In this combination, the beacon intervals
+ *	between infrastructure and AP types must match. This is required
+ *	only in special cases.
+ *
+ * These examples can be expressed as follows:
+ *
+ * Allow #STA <= 1, #AP <= 1, matching BI, channels = 1, 2 total:
+ *
+ *  struct ieee80211_iface_limit limits1[] = {
+ *	{ .max = 1, .types = BIT(NL80211_IFTYPE_STATION), },
+ *	{ .max = 1, .types = BIT(NL80211_IFTYPE_AP}, },
+ *  };
+ *  struct ieee80211_iface_combination combination1 = {
+ *	.limits = limits1,
+ *	.n_limits = ARRAY_SIZE(limits1),
+ *	.max_interfaces = 2,
+ *	.beacon_int_infra_match = true,
+ *  };
+ *
+ *
+ * Allow #{AP, P2P-GO} <= 8, channels = 1, 8 total:
+ *
+ *  struct ieee80211_iface_limit limits2[] = {
+ *	{ .max = 8, .types = BIT(NL80211_IFTYPE_AP) |
+ *			     BIT(NL80211_IFTYPE_P2P_GO), },
+ *  };
+ *  struct ieee80211_iface_combination combination2 = {
+ *	.limits = limits2,
+ *	.n_limits = ARRAY_SIZE(limits2),
+ *	.max_interfaces = 8,
+ *	.num_different_channels = 1,
+ *  };
+ *
+ *
+ * Allow #STA <= 1, #{P2P-client,P2P-GO} <= 3 on two channels, 4 total.
+ * This allows for an infrastructure connection and three P2P connections.
+ *
+ *  struct ieee80211_iface_limit limits3[] = {
+ *	{ .max = 1, .types = BIT(NL80211_IFTYPE_STATION), },
+ *	{ .max = 3, .types = BIT(NL80211_IFTYPE_P2P_GO) |
+ *			     BIT(NL80211_IFTYPE_P2P_CLIENT), },
+ *  };
+ *  struct ieee80211_iface_combination combination3 = {
+ *	.limits = limits3,
+ *	.n_limits = ARRAY_SIZE(limits3),
+ *	.max_interfaces = 4,
+ *	.num_different_channels = 2,
+ *  };
+ */
+struct ieee80211_iface_combination {
+	const struct ieee80211_iface_limit *limits;
+	u32 num_different_channels;
+	u16 max_interfaces;
+	u8 n_limits;
+	bool beacon_int_infra_match;
+};
+
+struct mac_address {
+	u8 addr[ETH_ALEN];
+};
+
+struct ieee80211_txrx_stypes {
+	u16 tx, rx;
+};
+
+/**
+ * enum wiphy_wowlan_support_flags - WoWLAN support flags
+ * @WIPHY_WOWLAN_ANY: supports wakeup for the special "any"
+ *	trigger that keeps the device operating as-is and
+ *	wakes up the host on any activity, for example a
+ *	received packet that passed filtering; note that the
+ *	packet should be preserved in that case
+ * @WIPHY_WOWLAN_MAGIC_PKT: supports wakeup on magic packet
+ *	(see nl80211.h)
+ * @WIPHY_WOWLAN_DISCONNECT: supports wakeup on disconnect
+ * @WIPHY_WOWLAN_SUPPORTS_GTK_REKEY: supports GTK rekeying while asleep
+ * @WIPHY_WOWLAN_GTK_REKEY_FAILURE: supports wakeup on GTK rekey failure
+ * @WIPHY_WOWLAN_EAP_IDENTITY_REQ: supports wakeup on EAP identity request
+ * @WIPHY_WOWLAN_4WAY_HANDSHAKE: supports wakeup on 4-way handshake failure
+ * @WIPHY_WOWLAN_RFKILL_RELEASE: supports wakeup on RF-kill release
+ */
+enum wiphy_wowlan_support_flags {
+	WIPHY_WOWLAN_ANY		= BIT(0),
+	WIPHY_WOWLAN_MAGIC_PKT		= BIT(1),
+	WIPHY_WOWLAN_DISCONNECT		= BIT(2),
+	WIPHY_WOWLAN_SUPPORTS_GTK_REKEY	= BIT(3),
+	WIPHY_WOWLAN_GTK_REKEY_FAILURE	= BIT(4),
+	WIPHY_WOWLAN_EAP_IDENTITY_REQ	= BIT(5),
+	WIPHY_WOWLAN_4WAY_HANDSHAKE	= BIT(6),
+	WIPHY_WOWLAN_RFKILL_RELEASE	= BIT(7),
+};
+
+/**
+ * struct wiphy_wowlan_support - WoWLAN support data
+ * @flags: see &enum wiphy_wowlan_support_flags
+ * @n_patterns: number of supported wakeup patterns
+ *	(see nl80211.h for the pattern definition)
+ * @pattern_max_len: maximum length of each pattern
+ * @pattern_min_len: minimum length of each pattern
+ */
+struct wiphy_wowlan_support {
+	u32 flags;
+	int n_patterns;
+	int pattern_max_len;
+	int pattern_min_len;
+};
+
+/**
+ * struct wiphy - wireless hardware description
+ * @reg_notifier: the driver's regulatory notification callback,
+ *	note that if your driver uses wiphy_apply_custom_regulatory()
+ *	the reg_notifier's request can be passed as NULL
+ * @regd: the driver's regulatory domain, if one was requested via
+ * 	the regulatory_hint() API. This can be used by the driver
+ *	on the reg_notifier() if it chooses to ignore future
+ *	regulatory domain changes caused by other drivers.
+ * @signal_type: signal type reported in &struct cfg80211_bss.
+ * @cipher_suites: supported cipher suites
+ * @n_cipher_suites: number of supported cipher suites
+ * @retry_short: Retry limit for short frames (dot11ShortRetryLimit)
+ * @retry_long: Retry limit for long frames (dot11LongRetryLimit)
+ * @frag_threshold: Fragmentation threshold (dot11FragmentationThreshold);
+ *	-1 = fragmentation disabled, only odd values >= 256 used
+ * @rts_threshold: RTS threshold (dot11RTSThreshold); -1 = RTS/CTS disabled
+ * @_net: the network namespace this wiphy currently lives in
+ * @perm_addr: permanent MAC address of this device
+ * @addr_mask: If the device supports multiple MAC addresses by masking,
+ *	set this to a mask with variable bits set to 1, e.g. if the last
+ *	four bits are variable then set it to 00:...:00:0f. The actual
+ *	variable bits shall be determined by the interfaces added, with
+ *	interfaces not matching the mask being rejected to be brought up.
+ * @n_addresses: number of addresses in @addresses.
+ * @addresses: If the device has more than one address, set this pointer
+ *	to a list of addresses (6 bytes each). The first one will be used
+ *	by default for perm_addr. In this case, the mask should be set to
+ *	all-zeroes. In this case it is assumed that the device can handle
+ *	the same number of arbitrary MAC addresses.
+ * @registered: protects ->resume and ->suspend sysfs callbacks against
+ *	unregister hardware
+ * @debugfsdir: debugfs directory used for this wiphy, will be renamed
+ *	automatically on wiphy renames
+ * @dev: (virtual) struct device for this wiphy
+ * @registered: helps synchronize suspend/resume with wiphy unregister
+ * @wext: wireless extension handlers
+ * @priv: driver private data (sized according to wiphy_new() parameter)
+ * @interface_modes: bitmask of interfaces types valid for this wiphy,
+ *	must be set by driver
+ * @iface_combinations: Valid interface combinations array, should not
+ *	list single interface types.
+ * @n_iface_combinations: number of entries in @iface_combinations array.
+ * @software_iftypes: bitmask of software interface types, these are not
+ *	subject to any restrictions since they are purely managed in SW.
+ * @flags: wiphy flags, see &enum wiphy_flags
+ * @features: features advertised to nl80211, see &enum nl80211_feature_flags.
+ * @bss_priv_size: each BSS struct has private data allocated with it,
+ *	this variable determines its size
+ * @max_scan_ssids: maximum number of SSIDs the device can scan for in
+ *	any given scan
+ * @max_sched_scan_ssids: maximum number of SSIDs the device can scan
+ *	for in any given scheduled scan
+ * @max_match_sets: maximum number of match sets the device can handle
+ *	when performing a scheduled scan, 0 if filtering is not
+ *	supported.
+ * @max_scan_ie_len: maximum length of user-controlled IEs device can
+ *	add to probe request frames transmitted during a scan, must not
+ *	include fixed IEs like supported rates
+ * @max_sched_scan_ie_len: same as max_scan_ie_len, but for scheduled
+ *	scans
+ * @coverage_class: current coverage class
+ * @fw_version: firmware version for ethtool reporting
+ * @hw_version: hardware version for ethtool reporting
+ * @max_num_pmkids: maximum number of PMKIDs supported by device
+ * @privid: a pointer that drivers can use to identify if an arbitrary
+ *	wiphy is theirs, e.g. in global notifiers
+ * @bands: information about bands/channels supported by this device
+ *
+ * @mgmt_stypes: bitmasks of frame subtypes that can be subscribed to or
+ *	transmitted through nl80211, points to an array indexed by interface
+ *	type
+ *
+ * @available_antennas_tx: bitmap of antennas which are available to be
+ *	configured as TX antennas. Antenna configuration commands will be
+ *	rejected unless this or @available_antennas_rx is set.
+ *
+ * @available_antennas_rx: bitmap of antennas which are available to be
+ *	configured as RX antennas. Antenna configuration commands will be
+ *	rejected unless this or @available_antennas_tx is set.
+ *
+ * @probe_resp_offload:
+ *	 Bitmap of supported protocols for probe response offloading.
+ *	 See &enum nl80211_probe_resp_offload_support_attr. Only valid
+ *	 when the wiphy flag @WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD is set.
+ *
+ * @max_remain_on_channel_duration: Maximum time a remain-on-channel operation
+ *	may request, if implemented.
+ *
+ * @wowlan: WoWLAN support information
+ *
+ * @ap_sme_capa: AP SME capabilities, flags from &enum nl80211_ap_sme_features.
+ * @ht_capa_mod_mask:  Specify what ht_cap values can be over-ridden.
+ *	If null, then none can be over-ridden.
+ */
+struct wiphy {
+	/* assign these fields before you register the wiphy */
+
+	/* permanent MAC address(es) */
+	u8 perm_addr[ETH_ALEN];
+	u8 addr_mask[ETH_ALEN];
+
+	struct mac_address *addresses;
+
+	const struct ieee80211_txrx_stypes *mgmt_stypes;
+
+	const struct ieee80211_iface_combination *iface_combinations;
+	int n_iface_combinations;
+	u16 software_iftypes;
+
+	u16 n_addresses;
+
+	/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
+	u16 interface_modes;
+
+	u32 flags, features;
+
+	u32 ap_sme_capa;
+
+	enum cfg80211_signal_type signal_type;
+
+	int bss_priv_size;
+	u8 max_scan_ssids;
+	u8 max_sched_scan_ssids;
+	u8 max_match_sets;
+	u16 max_scan_ie_len;
+	u16 max_sched_scan_ie_len;
+
+	int n_cipher_suites;
+	const u32 *cipher_suites;
+
+	u8 retry_short;
+	u8 retry_long;
+	u32 frag_threshold;
+	u32 rts_threshold;
+	u8 coverage_class;
+
+	char fw_version[ETHTOOL_BUSINFO_LEN];
+	u32 hw_version;
+
+	struct wiphy_wowlan_support wowlan;
+
+	u16 max_remain_on_channel_duration;
+
+	u8 max_num_pmkids;
+
+	u32 available_antennas_tx;
+	u32 available_antennas_rx;
+
+	/*
+	 * Bitmap of supported protocols for probe response offloading
+	 * see &enum nl80211_probe_resp_offload_support_attr. Only valid
+	 * when the wiphy flag @WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD is set.
+	 */
+	u32 probe_resp_offload;
+
+	/* If multiple wiphys are registered and you're handed e.g.
+	 * a regular netdev with assigned ieee80211_ptr, you won't
+	 * know whether it points to a wiphy your driver has registered
+	 * or not. Assign this to something global to your driver to
+	 * help determine whether you own this wiphy or not. */
+	const void *privid;
+
+	struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS];
+
+	/* Lets us get back the wiphy on the callback */
+	int (*reg_notifier)(struct wiphy *wiphy,
+			    struct regulatory_request *request);
+
+	/* fields below are read-only, assigned by cfg80211 */
+
+	const struct ieee80211_regdomain *regd;
+
+	/* the item in /sys/class/ieee80211/ points to this,
+	 * you need use set_wiphy_dev() (see below) */
+	struct device dev;
+
+	/* protects ->resume, ->suspend sysfs callbacks against unregister hw */
+	bool registered;
+
+	/* dir in debugfs: ieee80211/<wiphyname> */
+	struct dentry *debugfsdir;
+
+	const struct ieee80211_ht_cap *ht_capa_mod_mask;
+
+#ifdef CONFIG_NET_NS
+	/* the network namespace this phy lives in currently */
+	struct net *_net;
+#endif
+
+#ifdef CONFIG_CFG80211_WEXT
+	const struct iw_handler_def *wext;
+#endif
+
+	char priv[0] __attribute__((__aligned__(NETDEV_ALIGN)));
+};
+
+static inline struct net *wiphy_net(struct wiphy *wiphy)
+{
+	return read_pnet(&wiphy->_net);
+}
+
+static inline void wiphy_net_set(struct wiphy *wiphy, struct net *net)
+{
+	write_pnet(&wiphy->_net, net);
+}
+
+/**
+ * wiphy_priv - return priv from wiphy
+ *
+ * @wiphy: the wiphy whose priv pointer to return
+ */
+static inline void *wiphy_priv(struct wiphy *wiphy)
+{
+	BUG_ON(!wiphy);
+	return &wiphy->priv;
+}
+
+/**
+ * priv_to_wiphy - return the wiphy containing the priv
+ *
+ * @priv: a pointer previously returned by wiphy_priv
+ */
+static inline struct wiphy *priv_to_wiphy(void *priv)
+{
+	BUG_ON(!priv);
+	return container_of(priv, struct wiphy, priv);
+}
+
+/**
+ * set_wiphy_dev - set device pointer for wiphy
+ *
+ * @wiphy: The wiphy whose device to bind
+ * @dev: The device to parent it to
+ */
+static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev)
+{
+	wiphy->dev.parent = dev;
+}
+
+/**
+ * wiphy_dev - get wiphy dev pointer
+ *
+ * @wiphy: The wiphy whose device struct to look up
+ */
+static inline struct device *wiphy_dev(struct wiphy *wiphy)
+{
+	return wiphy->dev.parent;
+}
+
+/**
+ * wiphy_name - get wiphy name
+ *
+ * @wiphy: The wiphy whose name to return
+ */
+static inline const char *wiphy_name(const struct wiphy *wiphy)
+{
+	return dev_name(&wiphy->dev);
+}
+
+/**
+ * wiphy_new - create a new wiphy for use with cfg80211
+ *
+ * @ops: The configuration operations for this device
+ * @sizeof_priv: The size of the private area to allocate
+ *
+ * Create a new wiphy and associate the given operations with it.
+ * @sizeof_priv bytes are allocated for private use.
+ *
+ * The returned pointer must be assigned to each netdev's
+ * ieee80211_ptr for proper operation.
+ */
+struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv);
+
+/**
+ * wiphy_register - register a wiphy with cfg80211
+ *
+ * @wiphy: The wiphy to register.
+ *
+ * Returns a non-negative wiphy index or a negative error code.
+ */
+extern int wiphy_register(struct wiphy *wiphy);
+
+/**
+ * wiphy_unregister - deregister a wiphy from cfg80211
+ *
+ * @wiphy: The wiphy to unregister.
+ *
+ * After this call, no more requests can be made with this priv
+ * pointer, but the call may sleep to wait for an outstanding
+ * request that is being handled.
+ */
+extern void wiphy_unregister(struct wiphy *wiphy);
+
+/**
+ * wiphy_free - free wiphy
+ *
+ * @wiphy: The wiphy to free
+ */
+extern void wiphy_free(struct wiphy *wiphy);
+
+/* internal structs */
+struct cfg80211_conn;
+struct cfg80211_internal_bss;
+struct cfg80211_cached_keys;
+
+/**
+ * struct wireless_dev - wireless per-netdev state
+ *
+ * This structure must be allocated by the driver/stack
+ * that uses the ieee80211_ptr field in struct net_device
+ * (this is intentional so it can be allocated along with
+ * the netdev.)
+ *
+ * @wiphy: pointer to hardware description
+ * @iftype: interface type
+ * @list: (private) Used to collect the interfaces
+ * @netdev: (private) Used to reference back to the netdev
+ * @current_bss: (private) Used by the internal configuration code
+ * @channel: (private) Used by the internal configuration code to track
+ *	user-set AP, monitor and WDS channels for wireless extensions
+ * @bssid: (private) Used by the internal configuration code
+ * @ssid: (private) Used by the internal configuration code
+ * @ssid_len: (private) Used by the internal configuration code
+ * @mesh_id_len: (private) Used by the internal configuration code
+ * @mesh_id_up_len: (private) Used by the internal configuration code
+ * @wext: (private) Used by the internal wireless extensions compat code
+ * @use_4addr: indicates 4addr mode is used on this interface, must be
+ *	set by driver (if supported) on add_interface BEFORE registering the
+ *	netdev and may otherwise be used by driver read-only, will be update
+ *	by cfg80211 on change_interface
+ * @mgmt_registrations: list of registrations for management frames
+ * @mgmt_registrations_lock: lock for the list
+ * @mtx: mutex used to lock data in this struct
+ * @cleanup_work: work struct used for cleanup that can't be done directly
+ * @beacon_interval: beacon interval used on this device for transmitting
+ *	beacons, 0 when not valid
+ */
+struct wireless_dev {
+	struct wiphy *wiphy;
+	enum nl80211_iftype iftype;
+
+	/* the remainder of this struct should be private to cfg80211 */
+	struct list_head list;
+	struct net_device *netdev;
+
+	struct list_head mgmt_registrations;
+	spinlock_t mgmt_registrations_lock;
+
+	struct mutex mtx;
+
+	struct work_struct cleanup_work;
+
+	bool use_4addr;
+
+	/* currently used for IBSS and SME - might be rearranged later */
+	u8 ssid[IEEE80211_MAX_SSID_LEN];
+	u8 ssid_len, mesh_id_len, mesh_id_up_len;
+	enum {
+		CFG80211_SME_IDLE,
+		CFG80211_SME_CONNECTING,
+		CFG80211_SME_CONNECTED,
+	} sme_state;
+	struct cfg80211_conn *conn;
+	struct cfg80211_cached_keys *connect_keys;
+
+	struct list_head event_list;
+	spinlock_t event_lock;
+
+	struct cfg80211_internal_bss *current_bss; /* associated / joined */
+	struct ieee80211_channel *channel;
+
+	bool ps;
+	int ps_timeout;
+
+	int beacon_interval;
+
+	u32 ap_unexpected_nlpid;
+
+#ifdef CONFIG_CFG80211_WEXT
+	/* wext data */
+	struct {
+		struct cfg80211_ibss_params ibss;
+		struct cfg80211_connect_params connect;
+		struct cfg80211_cached_keys *keys;
+		u8 *ie;
+		size_t ie_len;
+		u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN];
+		u8 ssid[IEEE80211_MAX_SSID_LEN];
+		s8 default_key, default_mgmt_key;
+		bool prev_bssid_valid;
+	} wext;
+#endif
+};
+
+/**
+ * wdev_priv - return wiphy priv from wireless_dev
+ *
+ * @wdev: The wireless device whose wiphy's priv pointer to return
+ */
+static inline void *wdev_priv(struct wireless_dev *wdev)
+{
+	BUG_ON(!wdev);
+	return wiphy_priv(wdev->wiphy);
+}
+
+/**
+ * DOC: Utility functions
+ *
+ * cfg80211 offers a number of utility functions that can be useful.
+ */
+
+/**
+ * ieee80211_channel_to_frequency - convert channel number to frequency
+ * @chan: channel number
+ * @band: band, necessary due to channel number overlap
+ */
+extern int ieee80211_channel_to_frequency(int chan, enum ieee80211_band band);
+
+/**
+ * ieee80211_frequency_to_channel - convert frequency to channel number
+ * @freq: center frequency
+ */
+extern int ieee80211_frequency_to_channel(int freq);
+
+/*
+ * Name indirection necessary because the ieee80211 code also has
+ * a function named "ieee80211_get_channel", so if you include
+ * cfg80211's header file you get cfg80211's version, if you try
+ * to include both header files you'll (rightfully!) get a symbol
+ * clash.
+ */
+extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy,
+							 int freq);
+/**
+ * ieee80211_get_channel - get channel struct from wiphy for specified frequency
+ * @wiphy: the struct wiphy to get the channel for
+ * @freq: the center frequency of the channel
+ */
+static inline struct ieee80211_channel *
+ieee80211_get_channel(struct wiphy *wiphy, int freq)
+{
+	return __ieee80211_get_channel(wiphy, freq);
+}
+
+/**
+ * ieee80211_get_response_rate - get basic rate for a given rate
+ *
+ * @sband: the band to look for rates in
+ * @basic_rates: bitmap of basic rates
+ * @bitrate: the bitrate for which to find the basic rate
+ *
+ * This function returns the basic rate corresponding to a given
+ * bitrate, that is the next lower bitrate contained in the basic
+ * rate map, which is, for this function, given as a bitmap of
+ * indices of rates in the band's bitrate table.
+ */
+struct ieee80211_rate *
+ieee80211_get_response_rate(struct ieee80211_supported_band *sband,
+			    u32 basic_rates, int bitrate);
+
+/*
+ * Radiotap parsing functions -- for controlled injection support
+ *
+ * Implemented in net/wireless/radiotap.c
+ * Documentation in Documentation/networking/radiotap-headers.txt
+ */
+
+struct radiotap_align_size {
+	uint8_t align:4, size:4;
+};
+
+struct ieee80211_radiotap_namespace {
+	const struct radiotap_align_size *align_size;
+	int n_bits;
+	uint32_t oui;
+	uint8_t subns;
+};
+
+struct ieee80211_radiotap_vendor_namespaces {
+	const struct ieee80211_radiotap_namespace *ns;
+	int n_ns;
+};
+
+/**
+ * struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args
+ * @this_arg_index: index of current arg, valid after each successful call
+ *	to ieee80211_radiotap_iterator_next()
+ * @this_arg: pointer to current radiotap arg; it is valid after each
+ *	call to ieee80211_radiotap_iterator_next() but also after
+ *	ieee80211_radiotap_iterator_init() where it will point to
+ *	the beginning of the actual data portion
+ * @this_arg_size: length of the current arg, for convenience
+ * @current_namespace: pointer to the current namespace definition
+ *	(or internally %NULL if the current namespace is unknown)
+ * @is_radiotap_ns: indicates whether the current namespace is the default
+ *	radiotap namespace or not
+ *
+ * @_rtheader: pointer to the radiotap header we are walking through
+ * @_max_length: length of radiotap header in cpu byte ordering
+ * @_arg_index: next argument index
+ * @_arg: next argument pointer
+ * @_next_bitmap: internal pointer to next present u32
+ * @_bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present
+ * @_vns: vendor namespace definitions
+ * @_next_ns_data: beginning of the next namespace's data
+ * @_reset_on_ext: internal; reset the arg index to 0 when going to the
+ *	next bitmap word
+ *
+ * Describes the radiotap parser state. Fields prefixed with an underscore
+ * must not be used by users of the parser, only by the parser internally.
+ */
+
+struct ieee80211_radiotap_iterator {
+	struct ieee80211_radiotap_header *_rtheader;
+	const struct ieee80211_radiotap_vendor_namespaces *_vns;
+	const struct ieee80211_radiotap_namespace *current_namespace;
+
+	unsigned char *_arg, *_next_ns_data;
+	__le32 *_next_bitmap;
+
+	unsigned char *this_arg;
+	int this_arg_index;
+	int this_arg_size;
+
+	int is_radiotap_ns;
+
+	int _max_length;
+	int _arg_index;
+	uint32_t _bitmap_shifter;
+	int _reset_on_ext;
+};
+
+extern int ieee80211_radiotap_iterator_init(
+	struct ieee80211_radiotap_iterator *iterator,
+	struct ieee80211_radiotap_header *radiotap_header,
+	int max_length, const struct ieee80211_radiotap_vendor_namespaces *vns);
+
+extern int ieee80211_radiotap_iterator_next(
+	struct ieee80211_radiotap_iterator *iterator);
+
+
+extern const unsigned char rfc1042_header[6];
+extern const unsigned char bridge_tunnel_header[6];
+
+/**
+ * ieee80211_get_hdrlen_from_skb - get header length from data
+ *
+ * Given an skb with a raw 802.11 header at the data pointer this function
+ * returns the 802.11 header length in bytes (not including encryption
+ * headers). If the data in the sk_buff is too short to contain a valid 802.11
+ * header the function returns 0.
+ *
+ * @skb: the frame
+ */
+unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb);
+
+/**
+ * ieee80211_hdrlen - get header length in bytes from frame control
+ * @fc: frame control field in little-endian format
+ */
+unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc);
+
+/**
+ * DOC: Data path helpers
+ *
+ * In addition to generic utilities, cfg80211 also offers
+ * functions that help implement the data path for devices
+ * that do not do the 802.11/802.3 conversion on the device.
+ */
+
+/**
+ * ieee80211_data_to_8023 - convert an 802.11 data frame to 802.3
+ * @skb: the 802.11 data frame
+ * @addr: the device MAC address
+ * @iftype: the virtual interface type
+ */
+int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr,
+			   enum nl80211_iftype iftype);
+
+/**
+ * ieee80211_data_from_8023 - convert an 802.3 frame to 802.11
+ * @skb: the 802.3 frame
+ * @addr: the device MAC address
+ * @iftype: the virtual interface type
+ * @bssid: the network bssid (used only for iftype STATION and ADHOC)
+ * @qos: build 802.11 QoS data frame
+ */
+int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr,
+			     enum nl80211_iftype iftype, u8 *bssid, bool qos);
+
+/**
+ * ieee80211_amsdu_to_8023s - decode an IEEE 802.11n A-MSDU frame
+ *
+ * Decode an IEEE 802.11n A-MSDU frame and convert it to a list of
+ * 802.3 frames. The @list will be empty if the decode fails. The
+ * @skb is consumed after the function returns.
+ *
+ * @skb: The input IEEE 802.11n A-MSDU frame.
+ * @list: The output list of 802.3 frames. It must be allocated and
+ *	initialized by by the caller.
+ * @addr: The device MAC address.
+ * @iftype: The device interface type.
+ * @extra_headroom: The hardware extra headroom for SKBs in the @list.
+ * @has_80211_header: Set it true if SKB is with IEEE 802.11 header.
+ */
+void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list,
+			      const u8 *addr, enum nl80211_iftype iftype,
+			      const unsigned int extra_headroom,
+			      bool has_80211_header);
+
+/**
+ * cfg80211_classify8021d - determine the 802.1p/1d tag for a data frame
+ * @skb: the data frame
+ */
+unsigned int cfg80211_classify8021d(struct sk_buff *skb);
+
+/**
+ * cfg80211_find_ie - find information element in data
+ *
+ * @eid: element ID
+ * @ies: data consisting of IEs
+ * @len: length of data
+ *
+ * This function will return %NULL if the element ID could
+ * not be found or if the element is invalid (claims to be
+ * longer than the given data), or a pointer to the first byte
+ * of the requested element, that is the byte containing the
+ * element ID. There are no checks on the element length
+ * other than having to fit into the given data.
+ */
+const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len);
+
+/**
+ * cfg80211_find_vendor_ie - find vendor specific information element in data
+ *
+ * @oui: vendor OUI
+ * @oui_type: vendor-specific OUI type
+ * @ies: data consisting of IEs
+ * @len: length of data
+ *
+ * This function will return %NULL if the vendor specific element ID
+ * could not be found or if the element is invalid (claims to be
+ * longer than the given data), or a pointer to the first byte
+ * of the requested element, that is the byte containing the
+ * element ID. There are no checks on the element length
+ * other than having to fit into the given data.
+ */
+const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type,
+				  const u8 *ies, int len);
+
+/**
+ * DOC: Regulatory enforcement infrastructure
+ *
+ * TODO
+ */
+
+/**
+ * regulatory_hint - driver hint to the wireless core a regulatory domain
+ * @wiphy: the wireless device giving the hint (used only for reporting
+ *	conflicts)
+ * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain
+ * 	should be in. If @rd is set this should be NULL. Note that if you
+ * 	set this to NULL you should still set rd->alpha2 to some accepted
+ * 	alpha2.
+ *
+ * Wireless drivers can use this function to hint to the wireless core
+ * what it believes should be the current regulatory domain by
+ * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory
+ * domain should be in or by providing a completely build regulatory domain.
+ * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried
+ * for a regulatory domain structure for the respective country.
+ *
+ * The wiphy must have been registered to cfg80211 prior to this call.
+ * For cfg80211 drivers this means you must first use wiphy_register(),
+ * for mac80211 drivers you must first use ieee80211_register_hw().
+ *
+ * Drivers should check the return value, its possible you can get
+ * an -ENOMEM.
+ */
+extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2);
+
+/**
+ * wiphy_apply_custom_regulatory - apply a custom driver regulatory domain
+ * @wiphy: the wireless device we want to process the regulatory domain on
+ * @regd: the custom regulatory domain to use for this wiphy
+ *
+ * Drivers can sometimes have custom regulatory domains which do not apply
+ * to a specific country. Drivers can use this to apply such custom regulatory
+ * domains. This routine must be called prior to wiphy registration. The
+ * custom regulatory domain will be trusted completely and as such previous
+ * default channel settings will be disregarded. If no rule is found for a
+ * channel on the regulatory domain the channel will be disabled.
+ */
+extern void wiphy_apply_custom_regulatory(
+	struct wiphy *wiphy,
+	const struct ieee80211_regdomain *regd);
+
+/**
+ * freq_reg_info - get regulatory information for the given frequency
+ * @wiphy: the wiphy for which we want to process this rule for
+ * @center_freq: Frequency in KHz for which we want regulatory information for
+ * @desired_bw_khz: the desired max bandwidth you want to use per
+ *	channel. Note that this is still 20 MHz if you want to use HT40
+ *	as HT40 makes use of two channels for its 40 MHz width bandwidth.
+ *	If set to 0 we'll assume you want the standard 20 MHz.
+ * @reg_rule: the regulatory rule which we have for this frequency
+ *
+ * Use this function to get the regulatory rule for a specific frequency on
+ * a given wireless device. If the device has a specific regulatory domain
+ * it wants to follow we respect that unless a country IE has been received
+ * and processed already.
+ *
+ * Returns 0 if it was able to find a valid regulatory rule which does
+ * apply to the given center_freq otherwise it returns non-zero. It will
+ * also return -ERANGE if we determine the given center_freq does not even have
+ * a regulatory rule for a frequency range in the center_freq's band. See
+ * freq_in_rule_band() for our current definition of a band -- this is purely
+ * subjective and right now its 802.11 specific.
+ */
+extern int freq_reg_info(struct wiphy *wiphy,
+			 u32 center_freq,
+			 u32 desired_bw_khz,
+			 const struct ieee80211_reg_rule **reg_rule);
+
+/*
+ * callbacks for asynchronous cfg80211 methods, notification
+ * functions and BSS handling helpers
+ */
+
+/**
+ * cfg80211_scan_done - notify that scan finished
+ *
+ * @request: the corresponding scan request
+ * @aborted: set to true if the scan was aborted for any reason,
+ *	userspace will be notified of that
+ */
+void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted);
+
+/**
+ * cfg80211_sched_scan_results - notify that new scan results are available
+ *
+ * @wiphy: the wiphy which got scheduled scan results
+ */
+void cfg80211_sched_scan_results(struct wiphy *wiphy);
+
+/**
+ * cfg80211_sched_scan_stopped - notify that the scheduled scan has stopped
+ *
+ * @wiphy: the wiphy on which the scheduled scan stopped
+ *
+ * The driver can call this function to inform cfg80211 that the
+ * scheduled scan had to be stopped, for whatever reason.  The driver
+ * is then called back via the sched_scan_stop operation when done.
+ */
+void cfg80211_sched_scan_stopped(struct wiphy *wiphy);
+
+/**
+ * cfg80211_inform_bss_frame - inform cfg80211 of a received BSS frame
+ *
+ * @wiphy: the wiphy reporting the BSS
+ * @channel: The channel the frame was received on
+ * @mgmt: the management frame (probe response or beacon)
+ * @len: length of the management frame
+ * @signal: the signal strength, type depends on the wiphy's signal_type
+ * @gfp: context flags
+ *
+ * This informs cfg80211 that BSS information was found and
+ * the BSS should be updated/added.
+ *
+ * NOTE: Returns a referenced struct, must be released with cfg80211_put_bss()!
+ */
+struct cfg80211_bss * __must_check
+cfg80211_inform_bss_frame(struct wiphy *wiphy,
+			  struct ieee80211_channel *channel,
+			  struct ieee80211_mgmt *mgmt, size_t len,
+			  s32 signal, gfp_t gfp);
+
+/**
+ * cfg80211_inform_bss - inform cfg80211 of a new BSS
+ *
+ * @wiphy: the wiphy reporting the BSS
+ * @channel: The channel the frame was received on
+ * @bssid: the BSSID of the BSS
+ * @tsf: the TSF sent by the peer in the beacon/probe response (or 0)
+ * @capability: the capability field sent by the peer
+ * @beacon_interval: the beacon interval announced by the peer
+ * @ie: additional IEs sent by the peer
+ * @ielen: length of the additional IEs
+ * @signal: the signal strength, type depends on the wiphy's signal_type
+ * @gfp: context flags
+ *
+ * This informs cfg80211 that BSS information was found and
+ * the BSS should be updated/added.
+ *
+ * NOTE: Returns a referenced struct, must be released with cfg80211_put_bss()!
+ */
+struct cfg80211_bss * __must_check
+cfg80211_inform_bss(struct wiphy *wiphy,
+		    struct ieee80211_channel *channel,
+		    const u8 *bssid, u64 tsf, u16 capability,
+		    u16 beacon_interval, const u8 *ie, size_t ielen,
+		    s32 signal, gfp_t gfp);
+
+struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy,
+				      struct ieee80211_channel *channel,
+				      const u8 *bssid,
+				      const u8 *ssid, size_t ssid_len,
+				      u16 capa_mask, u16 capa_val);
+static inline struct cfg80211_bss *
+cfg80211_get_ibss(struct wiphy *wiphy,
+		  struct ieee80211_channel *channel,
+		  const u8 *ssid, size_t ssid_len)
+{
+	return cfg80211_get_bss(wiphy, channel, NULL, ssid, ssid_len,
+				WLAN_CAPABILITY_IBSS, WLAN_CAPABILITY_IBSS);
+}
+
+struct cfg80211_bss *cfg80211_get_mesh(struct wiphy *wiphy,
+				       struct ieee80211_channel *channel,
+				       const u8 *meshid, size_t meshidlen,
+				       const u8 *meshcfg);
+/**
+ * cfg80211_ref_bss - reference BSS struct
+ * @bss: the BSS struct to reference
+ *
+ * Increments the refcount of the given BSS struct.
+ */
+void cfg80211_ref_bss(struct cfg80211_bss *bss);
+
+/**
+ * cfg80211_put_bss - unref BSS struct
+ * @bss: the BSS struct
+ *
+ * Decrements the refcount of the given BSS struct.
+ */
+void cfg80211_put_bss(struct cfg80211_bss *bss);
+
+/**
+ * cfg80211_unlink_bss - unlink BSS from internal data structures
+ * @wiphy: the wiphy
+ * @bss: the bss to remove
+ *
+ * This function removes the given BSS from the internal data structures
+ * thereby making it no longer show up in scan results etc. Use this
+ * function when you detect a BSS is gone. Normally BSSes will also time
+ * out, so it is not necessary to use this function at all.
+ */
+void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *bss);
+
+/**
+ * cfg80211_send_rx_auth - notification of processed authentication
+ * @dev: network device
+ * @buf: authentication frame (header + body)
+ * @len: length of the frame data
+ *
+ * This function is called whenever an authentication has been processed in
+ * station mode. The driver is required to call either this function or
+ * cfg80211_send_auth_timeout() to indicate the result of cfg80211_ops::auth()
+ * call. This function may sleep.
+ */
+void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len);
+
+/**
+ * cfg80211_send_auth_timeout - notification of timed out authentication
+ * @dev: network device
+ * @addr: The MAC address of the device with which the authentication timed out
+ *
+ * This function may sleep.
+ */
+void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr);
+
+/**
+ * cfg80211_send_rx_assoc - notification of processed association
+ * @dev: network device
+ * @bss: the BSS struct association was requested for, the struct reference
+ *	is owned by cfg80211 after this call
+ * @buf: (re)association response frame (header + body)
+ * @len: length of the frame data
+ *
+ * This function is called whenever a (re)association response has been
+ * processed in station mode. The driver is required to call either this
+ * function or cfg80211_send_assoc_timeout() to indicate the result of
+ * cfg80211_ops::assoc() call. This function may sleep.
+ */
+void cfg80211_send_rx_assoc(struct net_device *dev, struct cfg80211_bss *bss,
+			    const u8 *buf, size_t len);
+
+/**
+ * cfg80211_send_assoc_timeout - notification of timed out association
+ * @dev: network device
+ * @addr: The MAC address of the device with which the association timed out
+ *
+ * This function may sleep.
+ */
+void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr);
+
+/**
+ * cfg80211_send_deauth - notification of processed deauthentication
+ * @dev: network device
+ * @buf: deauthentication frame (header + body)
+ * @len: length of the frame data
+ *
+ * This function is called whenever deauthentication has been processed in
+ * station mode. This includes both received deauthentication frames and
+ * locally generated ones. This function may sleep.
+ */
+void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
+
+/**
+ * __cfg80211_send_deauth - notification of processed deauthentication
+ * @dev: network device
+ * @buf: deauthentication frame (header + body)
+ * @len: length of the frame data
+ *
+ * Like cfg80211_send_deauth(), but doesn't take the wdev lock.
+ */
+void __cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
+
+/**
+ * cfg80211_send_disassoc - notification of processed disassociation
+ * @dev: network device
+ * @buf: disassociation response frame (header + body)
+ * @len: length of the frame data
+ *
+ * This function is called whenever disassociation has been processed in
+ * station mode. This includes both received disassociation frames and locally
+ * generated ones. This function may sleep.
+ */
+void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len);
+
+/**
+ * __cfg80211_send_disassoc - notification of processed disassociation
+ * @dev: network device
+ * @buf: disassociation response frame (header + body)
+ * @len: length of the frame data
+ *
+ * Like cfg80211_send_disassoc(), but doesn't take the wdev lock.
+ */
+void __cfg80211_send_disassoc(struct net_device *dev, const u8 *buf,
+	size_t len);
+
+/**
+ * cfg80211_send_unprot_deauth - notification of unprotected deauthentication
+ * @dev: network device
+ * @buf: deauthentication frame (header + body)
+ * @len: length of the frame data
+ *
+ * This function is called whenever a received Deauthentication frame has been
+ * dropped in station mode because of MFP being used but the Deauthentication
+ * frame was not protected. This function may sleep.
+ */
+void cfg80211_send_unprot_deauth(struct net_device *dev, const u8 *buf,
+				 size_t len);
+
+/**
+ * cfg80211_send_unprot_disassoc - notification of unprotected disassociation
+ * @dev: network device
+ * @buf: disassociation frame (header + body)
+ * @len: length of the frame data
+ *
+ * This function is called whenever a received Disassociation frame has been
+ * dropped in station mode because of MFP being used but the Disassociation
+ * frame was not protected. This function may sleep.
+ */
+void cfg80211_send_unprot_disassoc(struct net_device *dev, const u8 *buf,
+				   size_t len);
+
+/**
+ * cfg80211_michael_mic_failure - notification of Michael MIC failure (TKIP)
+ * @dev: network device
+ * @addr: The source MAC address of the frame
+ * @key_type: The key type that the received frame used
+ * @key_id: Key identifier (0..3). Can be -1 if missing.
+ * @tsc: The TSC value of the frame that generated the MIC failure (6 octets)
+ * @gfp: allocation flags
+ *
+ * This function is called whenever the local MAC detects a MIC failure in a
+ * received frame. This matches with MLME-MICHAELMICFAILURE.indication()
+ * primitive.
+ */
+void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr,
+				  enum nl80211_key_type key_type, int key_id,
+				  const u8 *tsc, gfp_t gfp);
+
+/**
+ * cfg80211_ibss_joined - notify cfg80211 that device joined an IBSS
+ *
+ * @dev: network device
+ * @bssid: the BSSID of the IBSS joined
+ * @gfp: allocation flags
+ *
+ * This function notifies cfg80211 that the device joined an IBSS or
+ * switched to a different BSSID. Before this function can be called,
+ * either a beacon has to have been received from the IBSS, or one of
+ * the cfg80211_inform_bss{,_frame} functions must have been called
+ * with the locally generated beacon -- this guarantees that there is
+ * always a scan result for this IBSS. cfg80211 will handle the rest.
+ */
+void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp);
+
+/**
+ * cfg80211_notify_new_candidate - notify cfg80211 of a new mesh peer candidate
+ *
+ * @dev: network device
+ * @macaddr: the MAC address of the new candidate
+ * @ie: information elements advertised by the peer candidate
+ * @ie_len: lenght of the information elements buffer
+ * @gfp: allocation flags
+ *
+ * This function notifies cfg80211 that the mesh peer candidate has been
+ * detected, most likely via a beacon or, less likely, via a probe response.
+ * cfg80211 then sends a notification to userspace.
+ */
+void cfg80211_notify_new_peer_candidate(struct net_device *dev,
+		const u8 *macaddr, const u8 *ie, u8 ie_len, gfp_t gfp);
+
+/**
+ * DOC: RFkill integration
+ *
+ * RFkill integration in cfg80211 is almost invisible to drivers,
+ * as cfg80211 automatically registers an rfkill instance for each
+ * wireless device it knows about. Soft kill is also translated
+ * into disconnecting and turning all interfaces off, drivers are
+ * expected to turn off the device when all interfaces are down.
+ *
+ * However, devices may have a hard RFkill line, in which case they
+ * also need to interact with the rfkill subsystem, via cfg80211.
+ * They can do this with a few helper functions documented here.
+ */
+
+/**
+ * wiphy_rfkill_set_hw_state - notify cfg80211 about hw block state
+ * @wiphy: the wiphy
+ * @blocked: block status
+ */
+void wiphy_rfkill_set_hw_state(struct wiphy *wiphy, bool blocked);
+
+/**
+ * wiphy_rfkill_start_polling - start polling rfkill
+ * @wiphy: the wiphy
+ */
+void wiphy_rfkill_start_polling(struct wiphy *wiphy);
+
+/**
+ * wiphy_rfkill_stop_polling - stop polling rfkill
+ * @wiphy: the wiphy
+ */
+void wiphy_rfkill_stop_polling(struct wiphy *wiphy);
+
+#ifdef CONFIG_NL80211_TESTMODE
+/**
+ * DOC: Test mode
+ *
+ * Test mode is a set of utility functions to allow drivers to
+ * interact with driver-specific tools to aid, for instance,
+ * factory programming.
+ *
+ * This chapter describes how drivers interact with it, for more
+ * information see the nl80211 book's chapter on it.
+ */
+
+/**
+ * cfg80211_testmode_alloc_reply_skb - allocate testmode reply
+ * @wiphy: the wiphy
+ * @approxlen: an upper bound of the length of the data that will
+ *	be put into the skb
+ *
+ * This function allocates and pre-fills an skb for a reply to
+ * the testmode command. Since it is intended for a reply, calling
+ * it outside of the @testmode_cmd operation is invalid.
+ *
+ * The returned skb (or %NULL if any errors happen) is pre-filled
+ * with the wiphy index and set up in a way that any data that is
+ * put into the skb (with skb_put(), nla_put() or similar) will end
+ * up being within the %NL80211_ATTR_TESTDATA attribute, so all that
+ * needs to be done with the skb is adding data for the corresponding
+ * userspace tool which can then read that data out of the testdata
+ * attribute. You must not modify the skb in any other way.
+ *
+ * When done, call cfg80211_testmode_reply() with the skb and return
+ * its error code as the result of the @testmode_cmd operation.
+ */
+struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy,
+						  int approxlen);
+
+/**
+ * cfg80211_testmode_reply - send the reply skb
+ * @skb: The skb, must have been allocated with
+ *	cfg80211_testmode_alloc_reply_skb()
+ *
+ * Returns an error code or 0 on success, since calling this
+ * function will usually be the last thing before returning
+ * from the @testmode_cmd you should return the error code.
+ * Note that this function consumes the skb regardless of the
+ * return value.
+ */
+int cfg80211_testmode_reply(struct sk_buff *skb);
+
+/**
+ * cfg80211_testmode_alloc_event_skb - allocate testmode event
+ * @wiphy: the wiphy
+ * @approxlen: an upper bound of the length of the data that will
+ *	be put into the skb
+ * @gfp: allocation flags
+ *
+ * This function allocates and pre-fills an skb for an event on the
+ * testmode multicast group.
+ *
+ * The returned skb (or %NULL if any errors happen) is set up in the
+ * same way as with cfg80211_testmode_alloc_reply_skb() but prepared
+ * for an event. As there, you should simply add data to it that will
+ * then end up in the %NL80211_ATTR_TESTDATA attribute. Again, you must
+ * not modify the skb in any other way.
+ *
+ * When done filling the skb, call cfg80211_testmode_event() with the
+ * skb to send the event.
+ */
+struct sk_buff *cfg80211_testmode_alloc_event_skb(struct wiphy *wiphy,
+						  int approxlen, gfp_t gfp);
+
+/**
+ * cfg80211_testmode_event - send the event
+ * @skb: The skb, must have been allocated with
+ *	cfg80211_testmode_alloc_event_skb()
+ * @gfp: allocation flags
+ *
+ * This function sends the given @skb, which must have been allocated
+ * by cfg80211_testmode_alloc_event_skb(), as an event. It always
+ * consumes it.
+ */
+void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp);
+
+#define CFG80211_TESTMODE_CMD(cmd)	.testmode_cmd = (cmd),
+#define CFG80211_TESTMODE_DUMP(cmd)	.testmode_dump = (cmd),
+#else
+#define CFG80211_TESTMODE_CMD(cmd)
+#define CFG80211_TESTMODE_DUMP(cmd)
+#endif
+
+/**
+ * cfg80211_connect_result - notify cfg80211 of connection result
+ *
+ * @dev: network device
+ * @bssid: the BSSID of the AP
+ * @req_ie: association request IEs (maybe be %NULL)
+ * @req_ie_len: association request IEs length
+ * @resp_ie: association response IEs (may be %NULL)
+ * @resp_ie_len: assoc response IEs length
+ * @status: status code, 0 for successful connection, use
+ *	%WLAN_STATUS_UNSPECIFIED_FAILURE if your device cannot give you
+ *	the real status code for failures.
+ * @gfp: allocation flags
+ *
+ * It should be called by the underlying driver whenever connect() has
+ * succeeded.
+ */
+void cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
+			     const u8 *req_ie, size_t req_ie_len,
+			     const u8 *resp_ie, size_t resp_ie_len,
+			     u16 status, gfp_t gfp);
+
+/**
+ * cfg80211_roamed - notify cfg80211 of roaming
+ *
+ * @dev: network device
+ * @channel: the channel of the new AP
+ * @bssid: the BSSID of the new AP
+ * @req_ie: association request IEs (maybe be %NULL)
+ * @req_ie_len: association request IEs length
+ * @resp_ie: association response IEs (may be %NULL)
+ * @resp_ie_len: assoc response IEs length
+ * @gfp: allocation flags
+ *
+ * It should be called by the underlying driver whenever it roamed
+ * from one AP to another while connected.
+ */
+void cfg80211_roamed(struct net_device *dev,
+		     struct ieee80211_channel *channel,
+		     const u8 *bssid,
+		     const u8 *req_ie, size_t req_ie_len,
+		     const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp);
+
+/**
+ * cfg80211_roamed_bss - notify cfg80211 of roaming
+ *
+ * @dev: network device
+ * @bss: entry of bss to which STA got roamed
+ * @req_ie: association request IEs (maybe be %NULL)
+ * @req_ie_len: association request IEs length
+ * @resp_ie: association response IEs (may be %NULL)
+ * @resp_ie_len: assoc response IEs length
+ * @gfp: allocation flags
+ *
+ * This is just a wrapper to notify cfg80211 of roaming event with driver
+ * passing bss to avoid a race in timeout of the bss entry. It should be
+ * called by the underlying driver whenever it roamed from one AP to another
+ * while connected. Drivers which have roaming implemented in firmware
+ * may use this function to avoid a race in bss entry timeout where the bss
+ * entry of the new AP is seen in the driver, but gets timed out by the time
+ * it is accessed in __cfg80211_roamed() due to delay in scheduling
+ * rdev->event_work. In case of any failures, the reference is released
+ * either in cfg80211_roamed_bss() or in __cfg80211_romed(), Otherwise,
+ * it will be released while diconneting from the current bss.
+ */
+void cfg80211_roamed_bss(struct net_device *dev, struct cfg80211_bss *bss,
+			 const u8 *req_ie, size_t req_ie_len,
+			 const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp);
+
+/**
+ * cfg80211_disconnected - notify cfg80211 that connection was dropped
+ *
+ * @dev: network device
+ * @ie: information elements of the deauth/disassoc frame (may be %NULL)
+ * @ie_len: length of IEs
+ * @reason: reason code for the disconnection, set it to 0 if unknown
+ * @gfp: allocation flags
+ *
+ * After it calls this function, the driver should enter an idle state
+ * and not try to connect to any AP any more.
+ */
+void cfg80211_disconnected(struct net_device *dev, u16 reason,
+			   u8 *ie, size_t ie_len, gfp_t gfp);
+
+/**
+ * cfg80211_ready_on_channel - notification of remain_on_channel start
+ * @dev: network device
+ * @cookie: the request cookie
+ * @chan: The current channel (from remain_on_channel request)
+ * @channel_type: Channel type
+ * @duration: Duration in milliseconds that the driver intents to remain on the
+ *	channel
+ * @gfp: allocation flags
+ */
+void cfg80211_ready_on_channel(struct net_device *dev, u64 cookie,
+			       struct ieee80211_channel *chan,
+			       enum nl80211_channel_type channel_type,
+			       unsigned int duration, gfp_t gfp);
+
+/**
+ * cfg80211_remain_on_channel_expired - remain_on_channel duration expired
+ * @dev: network device
+ * @cookie: the request cookie
+ * @chan: The current channel (from remain_on_channel request)
+ * @channel_type: Channel type
+ * @gfp: allocation flags
+ */
+void cfg80211_remain_on_channel_expired(struct net_device *dev,
+					u64 cookie,
+					struct ieee80211_channel *chan,
+					enum nl80211_channel_type channel_type,
+					gfp_t gfp);
+
+
+/**
+ * cfg80211_new_sta - notify userspace about station
+ *
+ * @dev: the netdev
+ * @mac_addr: the station's address
+ * @sinfo: the station information
+ * @gfp: allocation flags
+ */
+void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr,
+		      struct station_info *sinfo, gfp_t gfp);
+
+/**
+ * cfg80211_del_sta - notify userspace about deletion of a station
+ *
+ * @dev: the netdev
+ * @mac_addr: the station's address
+ * @gfp: allocation flags
+ */
+void cfg80211_del_sta(struct net_device *dev, const u8 *mac_addr, gfp_t gfp);
+
+/**
+ * cfg80211_rx_mgmt - notification of received, unprocessed management frame
+ * @dev: network device
+ * @freq: Frequency on which the frame was received in MHz
+ * @sig_dbm: signal strength in mBm, or 0 if unknown
+ * @buf: Management frame (header + body)
+ * @len: length of the frame data
+ * @gfp: context flags
+ *
+ * Returns %true if a user space application has registered for this frame.
+ * For action frames, that makes it responsible for rejecting unrecognized
+ * action frames; %false otherwise, in which case for action frames the
+ * driver is responsible for rejecting the frame.
+ *
+ * This function is called whenever an Action frame is received for a station
+ * mode interface, but is not processed in kernel.
+ */
+bool cfg80211_rx_mgmt(struct net_device *dev, int freq, int sig_dbm,
+		      const u8 *buf, size_t len, gfp_t gfp);
+
+/**
+ * cfg80211_mgmt_tx_status - notification of TX status for management frame
+ * @dev: network device
+ * @cookie: Cookie returned by cfg80211_ops::mgmt_tx()
+ * @buf: Management frame (header + body)
+ * @len: length of the frame data
+ * @ack: Whether frame was acknowledged
+ * @gfp: context flags
+ *
+ * This function is called whenever a management frame was requested to be
+ * transmitted with cfg80211_ops::mgmt_tx() to report the TX status of the
+ * transmission attempt.
+ */
+void cfg80211_mgmt_tx_status(struct net_device *dev, u64 cookie,
+			     const u8 *buf, size_t len, bool ack, gfp_t gfp);
+
+
+/**
+ * cfg80211_cqm_rssi_notify - connection quality monitoring rssi event
+ * @dev: network device
+ * @rssi_event: the triggered RSSI event
+ * @gfp: context flags
+ *
+ * This function is called when a configured connection quality monitoring
+ * rssi threshold reached event occurs.
+ */
+void cfg80211_cqm_rssi_notify(struct net_device *dev,
+			      enum nl80211_cqm_rssi_threshold_event rssi_event,
+			      gfp_t gfp);
+
+/**
+ * cfg80211_cqm_pktloss_notify - notify userspace about packetloss to peer
+ * @dev: network device
+ * @peer: peer's MAC address
+ * @num_packets: how many packets were lost -- should be a fixed threshold
+ *	but probably no less than maybe 50, or maybe a throughput dependent
+ *	threshold (to account for temporary interference)
+ * @gfp: context flags
+ */
+void cfg80211_cqm_pktloss_notify(struct net_device *dev,
+				 const u8 *peer, u32 num_packets, gfp_t gfp);
+
+/**
+ * cfg80211_gtk_rekey_notify - notify userspace about driver rekeying
+ * @dev: network device
+ * @bssid: BSSID of AP (to avoid races)
+ * @replay_ctr: new replay counter
+ * @gfp: allocation flags
+ */
+void cfg80211_gtk_rekey_notify(struct net_device *dev, const u8 *bssid,
+			       const u8 *replay_ctr, gfp_t gfp);
+
+/**
+ * cfg80211_pmksa_candidate_notify - notify about PMKSA caching candidate
+ * @dev: network device
+ * @index: candidate index (the smaller the index, the higher the priority)
+ * @bssid: BSSID of AP
+ * @preauth: Whether AP advertises support for RSN pre-authentication
+ * @gfp: allocation flags
+ */
+void cfg80211_pmksa_candidate_notify(struct net_device *dev, int index,
+				     const u8 *bssid, bool preauth, gfp_t gfp);
+
+/**
+ * cfg80211_rx_spurious_frame - inform userspace about a spurious frame
+ * @dev: The device the frame matched to
+ * @addr: the transmitter address
+ * @gfp: context flags
+ *
+ * This function is used in AP mode (only!) to inform userspace that
+ * a spurious class 3 frame was received, to be able to deauth the
+ * sender.
+ * Returns %true if the frame was passed to userspace (or this failed
+ * for a reason other than not having a subscription.)
+ */
+bool cfg80211_rx_spurious_frame(struct net_device *dev,
+				const u8 *addr, gfp_t gfp);
+
+/**
+ * cfg80211_rx_unexpected_4addr_frame - inform about unexpected WDS frame
+ * @dev: The device the frame matched to
+ * @addr: the transmitter address
+ * @gfp: context flags
+ *
+ * This function is used in AP mode (only!) to inform userspace that
+ * an associated station sent a 4addr frame but that wasn't expected.
+ * It is allowed and desirable to send this event only once for each
+ * station to avoid event flooding.
+ * Returns %true if the frame was passed to userspace (or this failed
+ * for a reason other than not having a subscription.)
+ */
+bool cfg80211_rx_unexpected_4addr_frame(struct net_device *dev,
+					const u8 *addr, gfp_t gfp);
+
+/**
+ * cfg80211_probe_status - notify userspace about probe status
+ * @dev: the device the probe was sent on
+ * @addr: the address of the peer
+ * @cookie: the cookie filled in @probe_client previously
+ * @acked: indicates whether probe was acked or not
+ * @gfp: allocation flags
+ */
+void cfg80211_probe_status(struct net_device *dev, const u8 *addr,
+			   u64 cookie, bool acked, gfp_t gfp);
+
+/**
+ * cfg80211_report_obss_beacon - report beacon from other APs
+ * @wiphy: The wiphy that received the beacon
+ * @frame: the frame
+ * @len: length of the frame
+ * @freq: frequency the frame was received on
+ * @sig_dbm: signal strength in mBm, or 0 if unknown
+ * @gfp: allocation flags
+ *
+ * Use this function to report to userspace when a beacon was
+ * received. It is not useful to call this when there is no
+ * netdev that is in AP/GO mode.
+ */
+void cfg80211_report_obss_beacon(struct wiphy *wiphy,
+				 const u8 *frame, size_t len,
+				 int freq, int sig_dbm, gfp_t gfp);
+
+/*
+ * cfg80211_can_beacon_sec_chan - test if ht40 on extension channel can be used
+ * @wiphy: the wiphy
+ * @chan: main channel
+ * @channel_type: HT mode
+ */
+int cfg80211_can_beacon_sec_chan(struct wiphy *wiphy,
+				 struct ieee80211_channel *chan,
+				 enum nl80211_channel_type channel_type);
+
+/*
+ * cfg80211_calculate_bitrate - calculate actual bitrate (in 100Kbps units)
+ * @rate: given rate_info to calculate bitrate from
+ *
+ * return 0 if MCS index >= 32
+ */
+u16 cfg80211_calculate_bitrate(struct rate_info *rate);
+
+/* Logging, debugging and troubleshooting/diagnostic helpers. */
+
+/* wiphy_printk helpers, similar to dev_printk */
+
+#define wiphy_printk(level, wiphy, format, args...)		\
+	dev_printk(level, &(wiphy)->dev, format, ##args)
+#define wiphy_emerg(wiphy, format, args...)			\
+	dev_emerg(&(wiphy)->dev, format, ##args)
+#define wiphy_alert(wiphy, format, args...)			\
+	dev_alert(&(wiphy)->dev, format, ##args)
+#define wiphy_crit(wiphy, format, args...)			\
+	dev_crit(&(wiphy)->dev, format, ##args)
+#define wiphy_err(wiphy, format, args...)			\
+	dev_err(&(wiphy)->dev, format, ##args)
+#define wiphy_warn(wiphy, format, args...)			\
+	dev_warn(&(wiphy)->dev, format, ##args)
+#define wiphy_notice(wiphy, format, args...)			\
+	dev_notice(&(wiphy)->dev, format, ##args)
+#define wiphy_info(wiphy, format, args...)			\
+	dev_info(&(wiphy)->dev, format, ##args)
+
+#define wiphy_debug(wiphy, format, args...)			\
+	wiphy_printk(KERN_DEBUG, wiphy, format, ##args)
+
+#define wiphy_dbg(wiphy, format, args...)			\
+	dev_dbg(&(wiphy)->dev, format, ##args)
+
+#if defined(VERBOSE_DEBUG)
+#define wiphy_vdbg	wiphy_dbg
+#else
+#define wiphy_vdbg(wiphy, format, args...)				\
+({									\
+	if (0)								\
+		wiphy_printk(KERN_DEBUG, wiphy, format, ##args);	\
+	0;								\
+})
+#endif
+
+/*
+ * wiphy_WARN() acts like wiphy_printk(), but with the key difference
+ * of using a WARN/WARN_ON to get the message out, including the
+ * file/line information and a backtrace.
+ */
+#define wiphy_WARN(wiphy, format, args...)			\
+	WARN(1, "wiphy: %s\n" format, wiphy_name(wiphy), ##args);
+
+#endif /* __NET_CFG80211_H */
diff --git a/include/net/checksum.h b/include/net/checksum.h
new file mode 100644
index 00000000..ba55d8b8
--- /dev/null
+++ b/include/net/checksum.h
@@ -0,0 +1,121 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Checksumming functions for IP, TCP, UDP and so on
+ *
+ * Authors:	Jorge Cwik, <jorge@laser.satlink.net>
+ *		Arnt Gulbrandsen, <agulbra@nvg.unit.no>
+ *		Borrows very liberally from tcp.c and ip.c, see those
+ *		files for more names.
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _CHECKSUM_H
+#define _CHECKSUM_H
+
+#include <linux/errno.h>
+#include <asm/types.h>
+#include <asm/byteorder.h>
+#include <asm/uaccess.h>
+#include <asm/checksum.h>
+
+#ifndef _HAVE_ARCH_COPY_AND_CSUM_FROM_USER
+static inline
+__wsum csum_and_copy_from_user (const void __user *src, void *dst,
+				      int len, __wsum sum, int *err_ptr)
+{
+	if (access_ok(VERIFY_READ, src, len))
+		return csum_partial_copy_from_user(src, dst, len, sum, err_ptr);
+
+	if (len)
+		*err_ptr = -EFAULT;
+
+	return sum;
+}
+#endif
+
+#ifndef HAVE_CSUM_COPY_USER
+static __inline__ __wsum csum_and_copy_to_user
+(const void *src, void __user *dst, int len, __wsum sum, int *err_ptr)
+{
+	sum = csum_partial(src, len, sum);
+
+	if (access_ok(VERIFY_WRITE, dst, len)) {
+		if (copy_to_user(dst, src, len) == 0)
+			return sum;
+	}
+	if (len)
+		*err_ptr = -EFAULT;
+
+	return (__force __wsum)-1; /* invalid checksum */
+}
+#endif
+
+static inline __wsum csum_add(__wsum csum, __wsum addend)
+{
+	u32 res = (__force u32)csum;
+	res += (__force u32)addend;
+	return (__force __wsum)(res + (res < (__force u32)addend));
+}
+
+static inline __wsum csum_sub(__wsum csum, __wsum addend)
+{
+	return csum_add(csum, ~addend);
+}
+
+static inline __wsum
+csum_block_add(__wsum csum, __wsum csum2, int offset)
+{
+	u32 sum = (__force u32)csum2;
+	if (offset&1)
+		sum = ((sum&0xFF00FF)<<8)+((sum>>8)&0xFF00FF);
+	return csum_add(csum, (__force __wsum)sum);
+}
+
+static inline __wsum
+csum_block_sub(__wsum csum, __wsum csum2, int offset)
+{
+	u32 sum = (__force u32)csum2;
+	if (offset&1)
+		sum = ((sum&0xFF00FF)<<8)+((sum>>8)&0xFF00FF);
+	return csum_sub(csum, (__force __wsum)sum);
+}
+
+static inline __wsum csum_unfold(__sum16 n)
+{
+	return (__force __wsum)n;
+}
+
+#define CSUM_MANGLED_0 ((__force __sum16)0xffff)
+
+static inline void csum_replace4(__sum16 *sum, __be32 from, __be32 to)
+{
+	__be32 diff[] = { ~from, to };
+
+	*sum = csum_fold(csum_partial(diff, sizeof(diff), ~csum_unfold(*sum)));
+}
+
+static inline void csum_replace2(__sum16 *sum, __be16 from, __be16 to)
+{
+	csum_replace4(sum, (__force __be32)from, (__force __be32)to);
+}
+
+struct sk_buff;
+extern void inet_proto_csum_replace4(__sum16 *sum, struct sk_buff *skb,
+				     __be32 from, __be32 to, int pseudohdr);
+
+static inline void inet_proto_csum_replace2(__sum16 *sum, struct sk_buff *skb,
+					    __be16 from, __be16 to,
+					    int pseudohdr)
+{
+	inet_proto_csum_replace4(sum, skb, (__force __be32)from,
+				 (__force __be32)to, pseudohdr);
+}
+
+#endif
diff --git a/include/net/cipso_ipv4.h b/include/net/cipso_ipv4.h
new file mode 100644
index 00000000..a7a683e3
--- /dev/null
+++ b/include/net/cipso_ipv4.h
@@ -0,0 +1,319 @@
+/*
+ * CIPSO - Commercial IP Security Option
+ *
+ * This is an implementation of the CIPSO 2.2 protocol as specified in
+ * draft-ietf-cipso-ipsecurity-01.txt with additional tag types as found in
+ * FIPS-188, copies of both documents can be found in the Documentation
+ * directory.  While CIPSO never became a full IETF RFC standard many vendors
+ * have chosen to adopt the protocol and over the years it has become a
+ * de-facto standard for labeled networking.
+ *
+ * Author: Paul Moore <paul@paul-moore.com>
+ *
+ */
+
+/*
+ * (c) Copyright Hewlett-Packard Development Company, L.P., 2006
+ *
+ * This program is free software;  you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY;  without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program;  if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef _CIPSO_IPV4_H
+#define _CIPSO_IPV4_H
+
+#include <linux/types.h>
+#include <linux/rcupdate.h>
+#include <linux/list.h>
+#include <linux/net.h>
+#include <linux/skbuff.h>
+#include <net/netlabel.h>
+#include <net/request_sock.h>
+#include <linux/atomic.h>
+#include <asm/unaligned.h>
+
+/* known doi values */
+#define CIPSO_V4_DOI_UNKNOWN          0x00000000
+
+/* standard tag types */
+#define CIPSO_V4_TAG_INVALID          0
+#define CIPSO_V4_TAG_RBITMAP          1
+#define CIPSO_V4_TAG_ENUM             2
+#define CIPSO_V4_TAG_RANGE            5
+#define CIPSO_V4_TAG_PBITMAP          6
+#define CIPSO_V4_TAG_FREEFORM         7
+
+/* non-standard tag types (tags > 127) */
+#define CIPSO_V4_TAG_LOCAL            128
+
+/* doi mapping types */
+#define CIPSO_V4_MAP_UNKNOWN          0
+#define CIPSO_V4_MAP_TRANS            1
+#define CIPSO_V4_MAP_PASS             2
+#define CIPSO_V4_MAP_LOCAL            3
+
+/* limits */
+#define CIPSO_V4_MAX_REM_LVLS         255
+#define CIPSO_V4_INV_LVL              0x80000000
+#define CIPSO_V4_MAX_LOC_LVLS         (CIPSO_V4_INV_LVL - 1)
+#define CIPSO_V4_MAX_REM_CATS         65534
+#define CIPSO_V4_INV_CAT              0x80000000
+#define CIPSO_V4_MAX_LOC_CATS         (CIPSO_V4_INV_CAT - 1)
+
+/*
+ * CIPSO DOI definitions
+ */
+
+/* DOI definition struct */
+#define CIPSO_V4_TAG_MAXCNT           5
+struct cipso_v4_doi {
+	u32 doi;
+	u32 type;
+	union {
+		struct cipso_v4_std_map_tbl *std;
+	} map;
+	u8 tags[CIPSO_V4_TAG_MAXCNT];
+
+	atomic_t refcount;
+	struct list_head list;
+	struct rcu_head rcu;
+};
+
+/* Standard CIPSO mapping table */
+/* NOTE: the highest order bit (i.e. 0x80000000) is an 'invalid' flag, if the
+ *       bit is set then consider that value as unspecified, meaning the
+ *       mapping for that particular level/category is invalid */
+struct cipso_v4_std_map_tbl {
+	struct {
+		u32 *cipso;
+		u32 *local;
+		u32 cipso_size;
+		u32 local_size;
+	} lvl;
+	struct {
+		u32 *cipso;
+		u32 *local;
+		u32 cipso_size;
+		u32 local_size;
+	} cat;
+};
+
+/*
+ * Sysctl Variables
+ */
+
+#ifdef CONFIG_NETLABEL
+extern int cipso_v4_cache_enabled;
+extern int cipso_v4_cache_bucketsize;
+extern int cipso_v4_rbm_optfmt;
+extern int cipso_v4_rbm_strictvalid;
+#endif
+
+/*
+ * Helper Functions
+ */
+
+#define CIPSO_V4_OPTEXIST(x) (IPCB(x)->opt.cipso != 0)
+#define CIPSO_V4_OPTPTR(x) (skb_network_header(x) + IPCB(x)->opt.cipso)
+
+/*
+ * DOI List Functions
+ */
+
+#ifdef CONFIG_NETLABEL
+int cipso_v4_doi_add(struct cipso_v4_doi *doi_def,
+		     struct netlbl_audit *audit_info);
+void cipso_v4_doi_free(struct cipso_v4_doi *doi_def);
+int cipso_v4_doi_remove(u32 doi, struct netlbl_audit *audit_info);
+struct cipso_v4_doi *cipso_v4_doi_getdef(u32 doi);
+void cipso_v4_doi_putdef(struct cipso_v4_doi *doi_def);
+int cipso_v4_doi_walk(u32 *skip_cnt,
+		     int (*callback) (struct cipso_v4_doi *doi_def, void *arg),
+	             void *cb_arg);
+#else
+static inline int cipso_v4_doi_add(struct cipso_v4_doi *doi_def,
+				   struct netlbl_audit *audit_info)
+{
+	return -ENOSYS;
+}
+
+static inline void cipso_v4_doi_free(struct cipso_v4_doi *doi_def)
+{
+	return;
+}
+
+static inline int cipso_v4_doi_remove(u32 doi,
+				      struct netlbl_audit *audit_info)
+{
+	return 0;
+}
+
+static inline struct cipso_v4_doi *cipso_v4_doi_getdef(u32 doi)
+{
+	return NULL;
+}
+
+static inline int cipso_v4_doi_walk(u32 *skip_cnt,
+		     int (*callback) (struct cipso_v4_doi *doi_def, void *arg),
+		     void *cb_arg)
+{
+	return 0;
+}
+
+static inline int cipso_v4_doi_domhsh_add(struct cipso_v4_doi *doi_def,
+					  const char *domain)
+{
+	return -ENOSYS;
+}
+
+static inline int cipso_v4_doi_domhsh_remove(struct cipso_v4_doi *doi_def,
+					     const char *domain)
+{
+	return 0;
+}
+#endif /* CONFIG_NETLABEL */
+
+/*
+ * Label Mapping Cache Functions
+ */
+
+#ifdef CONFIG_NETLABEL
+void cipso_v4_cache_invalidate(void);
+int cipso_v4_cache_add(const struct sk_buff *skb,
+		       const struct netlbl_lsm_secattr *secattr);
+#else
+static inline void cipso_v4_cache_invalidate(void)
+{
+	return;
+}
+
+static inline int cipso_v4_cache_add(const struct sk_buff *skb,
+				     const struct netlbl_lsm_secattr *secattr)
+{
+	return 0;
+}
+#endif /* CONFIG_NETLABEL */
+
+/*
+ * Protocol Handling Functions
+ */
+
+#ifdef CONFIG_NETLABEL
+void cipso_v4_error(struct sk_buff *skb, int error, u32 gateway);
+int cipso_v4_sock_setattr(struct sock *sk,
+			  const struct cipso_v4_doi *doi_def,
+			  const struct netlbl_lsm_secattr *secattr);
+void cipso_v4_sock_delattr(struct sock *sk);
+int cipso_v4_sock_getattr(struct sock *sk, struct netlbl_lsm_secattr *secattr);
+int cipso_v4_req_setattr(struct request_sock *req,
+			 const struct cipso_v4_doi *doi_def,
+			 const struct netlbl_lsm_secattr *secattr);
+void cipso_v4_req_delattr(struct request_sock *req);
+int cipso_v4_skbuff_setattr(struct sk_buff *skb,
+			    const struct cipso_v4_doi *doi_def,
+			    const struct netlbl_lsm_secattr *secattr);
+int cipso_v4_skbuff_delattr(struct sk_buff *skb);
+int cipso_v4_skbuff_getattr(const struct sk_buff *skb,
+			    struct netlbl_lsm_secattr *secattr);
+int cipso_v4_validate(const struct sk_buff *skb, unsigned char **option);
+#else
+static inline void cipso_v4_error(struct sk_buff *skb,
+				  int error,
+				  u32 gateway)
+{
+	return;
+}
+
+static inline int cipso_v4_sock_setattr(struct sock *sk,
+				      const struct cipso_v4_doi *doi_def,
+				      const struct netlbl_lsm_secattr *secattr)
+{
+	return -ENOSYS;
+}
+
+static inline void cipso_v4_sock_delattr(struct sock *sk)
+{
+}
+
+static inline int cipso_v4_sock_getattr(struct sock *sk,
+					struct netlbl_lsm_secattr *secattr)
+{
+	return -ENOSYS;
+}
+
+static inline int cipso_v4_req_setattr(struct request_sock *req,
+				       const struct cipso_v4_doi *doi_def,
+				       const struct netlbl_lsm_secattr *secattr)
+{
+	return -ENOSYS;
+}
+
+static inline void cipso_v4_req_delattr(struct request_sock *req)
+{
+	return;
+}
+
+static inline int cipso_v4_skbuff_setattr(struct sk_buff *skb,
+				      const struct cipso_v4_doi *doi_def,
+				      const struct netlbl_lsm_secattr *secattr)
+{
+	return -ENOSYS;
+}
+
+static inline int cipso_v4_skbuff_delattr(struct sk_buff *skb)
+{
+	return -ENOSYS;
+}
+
+static inline int cipso_v4_skbuff_getattr(const struct sk_buff *skb,
+					  struct netlbl_lsm_secattr *secattr)
+{
+	return -ENOSYS;
+}
+
+static inline int cipso_v4_validate(const struct sk_buff *skb,
+				    unsigned char **option)
+{
+	unsigned char *opt = *option;
+	unsigned char err_offset = 0;
+	u8 opt_len = opt[1];
+	u8 opt_iter;
+
+	if (opt_len < 8) {
+		err_offset = 1;
+		goto out;
+	}
+
+	if (get_unaligned_be32(&opt[2]) == 0) {
+		err_offset = 2;
+		goto out;
+	}
+
+	for (opt_iter = 6; opt_iter < opt_len;) {
+		if (opt[opt_iter + 1] > (opt_len - opt_iter)) {
+			err_offset = opt_iter + 1;
+			goto out;
+		}
+		opt_iter += opt[opt_iter + 1];
+	}
+
+out:
+	*option = opt + err_offset;
+	return err_offset;
+
+}
+#endif /* CONFIG_NETLABEL */
+
+#endif /* _CIPSO_IPV4_H */
diff --git a/include/net/cls_cgroup.h b/include/net/cls_cgroup.h
new file mode 100644
index 00000000..a4dc5b02
--- /dev/null
+++ b/include/net/cls_cgroup.h
@@ -0,0 +1,70 @@
+/*
+ * cls_cgroup.h			Control Group Classifier
+ *
+ * Authors:	Thomas Graf <tgraf@suug.ch>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+
+#ifndef _NET_CLS_CGROUP_H
+#define _NET_CLS_CGROUP_H
+
+#include <linux/cgroup.h>
+#include <linux/hardirq.h>
+#include <linux/rcupdate.h>
+
+#ifdef CONFIG_CGROUPS
+struct cgroup_cls_state
+{
+	struct cgroup_subsys_state css;
+	u32 classid;
+};
+
+#ifdef CONFIG_NET_CLS_CGROUP
+static inline u32 task_cls_classid(struct task_struct *p)
+{
+	int classid;
+
+	if (in_interrupt())
+		return 0;
+
+	rcu_read_lock();
+	classid = container_of(task_subsys_state(p, net_cls_subsys_id),
+			       struct cgroup_cls_state, css)->classid;
+	rcu_read_unlock();
+
+	return classid;
+}
+#else
+extern int net_cls_subsys_id;
+
+static inline u32 task_cls_classid(struct task_struct *p)
+{
+	int id;
+	u32 classid = 0;
+
+	if (in_interrupt())
+		return 0;
+
+	rcu_read_lock();
+	id = rcu_dereference_index_check(net_cls_subsys_id,
+					 rcu_read_lock_held());
+	if (id >= 0)
+		classid = container_of(task_subsys_state(p, id),
+				       struct cgroup_cls_state, css)->classid;
+	rcu_read_unlock();
+
+	return classid;
+}
+#endif
+#else
+static inline u32 task_cls_classid(struct task_struct *p)
+{
+	return 0;
+}
+#endif
+#endif  /* _NET_CLS_CGROUP_H */
diff --git a/include/net/compat.h b/include/net/compat.h
new file mode 100644
index 00000000..a974ae92
--- /dev/null
+++ b/include/net/compat.h
@@ -0,0 +1,63 @@
+#ifndef NET_COMPAT_H
+#define NET_COMPAT_H
+
+
+struct sock;
+
+#if defined(CONFIG_COMPAT)
+
+#include <linux/compat.h>
+
+struct compat_msghdr {
+	compat_uptr_t	msg_name;	/* void * */
+	compat_int_t	msg_namelen;
+	compat_uptr_t	msg_iov;	/* struct compat_iovec * */
+	compat_size_t	msg_iovlen;
+	compat_uptr_t	msg_control;	/* void * */
+	compat_size_t	msg_controllen;
+	compat_uint_t	msg_flags;
+};
+
+struct compat_mmsghdr {
+	struct compat_msghdr msg_hdr;
+	compat_uint_t        msg_len;
+};
+
+struct compat_cmsghdr {
+	compat_size_t	cmsg_len;
+	compat_int_t	cmsg_level;
+	compat_int_t	cmsg_type;
+};
+
+extern int compat_sock_get_timestamp(struct sock *, struct timeval __user *);
+extern int compat_sock_get_timestampns(struct sock *, struct timespec __user *);
+
+#else /* defined(CONFIG_COMPAT) */
+/*
+ * To avoid compiler warnings:
+ */
+#define compat_msghdr	msghdr
+#define compat_mmsghdr	mmsghdr
+#endif /* defined(CONFIG_COMPAT) */
+
+extern int get_compat_msghdr(struct msghdr *, struct compat_msghdr __user *);
+extern int verify_compat_iovec(struct msghdr *, struct iovec *, struct sockaddr_storage *, int);
+extern asmlinkage long compat_sys_sendmsg(int,struct compat_msghdr __user *,unsigned);
+extern asmlinkage long compat_sys_sendmmsg(int, struct compat_mmsghdr __user *,
+					   unsigned, unsigned);
+extern asmlinkage long compat_sys_recvmsg(int,struct compat_msghdr __user *,unsigned);
+extern asmlinkage long compat_sys_recvmmsg(int, struct compat_mmsghdr __user *,
+					   unsigned, unsigned,
+					   struct compat_timespec __user *);
+extern asmlinkage long compat_sys_getsockopt(int, int, int, char __user *, int __user *);
+extern int put_cmsg_compat(struct msghdr*, int, int, int, void *);
+
+extern int cmsghdr_from_user_compat_to_kern(struct msghdr *, struct sock *, unsigned char *, int);
+
+extern int compat_mc_setsockopt(struct sock *, int, int, char __user *, unsigned int,
+	int (*)(struct sock *, int, int, char __user *, unsigned int));
+extern int compat_mc_getsockopt(struct sock *, int, int, char __user *,
+	int __user *, int (*)(struct sock *, int, int, char __user *,
+				int __user *));
+
+#endif /* NET_COMPAT_H */
diff --git a/include/net/datalink.h b/include/net/datalink.h
new file mode 100644
index 00000000..deb7ca75
--- /dev/null
+++ b/include/net/datalink.h
@@ -0,0 +1,18 @@
+#ifndef _NET_INET_DATALINK_H_
+#define _NET_INET_DATALINK_H_
+
+struct datalink_proto {
+        unsigned char   type[8];
+
+	struct llc_sap   *sap;
+
+        unsigned short  header_length;
+
+        int     (*rcvfunc)(struct sk_buff *, struct net_device *,
+                                struct packet_type *, struct net_device *);
+	int     (*request)(struct datalink_proto *, struct sk_buff *,
+                                        unsigned char *);
+	struct list_head node;
+};
+
+#endif
diff --git a/include/net/dcbevent.h b/include/net/dcbevent.h
new file mode 100644
index 00000000..443626ed
--- /dev/null
+++ b/include/net/dcbevent.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (c) 2010, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * Author: John Fastabend <john.r.fastabend@intel.com>
+ */
+
+#ifndef _DCB_EVENT_H
+#define _DCB_EVENT_H
+
+enum dcbevent_notif_type {
+	DCB_APP_EVENT = 1,
+};
+
+#ifdef CONFIG_DCB
+extern int register_dcbevent_notifier(struct notifier_block *nb);
+extern int unregister_dcbevent_notifier(struct notifier_block *nb);
+extern int call_dcbevent_notifiers(unsigned long val, void *v);
+#else
+static inline int
+register_dcbevent_notifier(struct notifier_block *nb)
+{
+	return 0;
+}
+
+static inline int unregister_dcbevent_notifier(struct notifier_block *nb)
+{
+	return 0;
+}
+
+static inline int call_dcbevent_notifiers(unsigned long val, void *v)
+{
+	return 0;
+}
+#endif /* CONFIG_DCB */
+
+#endif
diff --git a/include/net/dcbnl.h b/include/net/dcbnl.h
new file mode 100644
index 00000000..f55c980d
--- /dev/null
+++ b/include/net/dcbnl.h
@@ -0,0 +1,102 @@
+/*
+ * Copyright (c) 2008, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * Author: Lucy Liu <lucy.liu@intel.com>
+ */
+
+#ifndef __NET_DCBNL_H__
+#define __NET_DCBNL_H__
+
+#include <linux/dcbnl.h>
+
+struct dcb_app_type {
+	int	ifindex;
+	struct dcb_app	  app;
+	struct list_head  list;
+	u8	dcbx;
+};
+
+int dcb_setapp(struct net_device *, struct dcb_app *);
+u8 dcb_getapp(struct net_device *, struct dcb_app *);
+int dcb_ieee_setapp(struct net_device *, struct dcb_app *);
+int dcb_ieee_delapp(struct net_device *, struct dcb_app *);
+u8 dcb_ieee_getapp_mask(struct net_device *, struct dcb_app *);
+
+int dcbnl_ieee_notify(struct net_device *dev, int event, int cmd,
+		      u32 seq, u32 pid);
+int dcbnl_cee_notify(struct net_device *dev, int event, int cmd,
+		     u32 seq, u32 pid);
+
+/*
+ * Ops struct for the netlink callbacks.  Used by DCB-enabled drivers through
+ * the netdevice struct.
+ */
+struct dcbnl_rtnl_ops {
+	/* IEEE 802.1Qaz std */
+	int (*ieee_getets) (struct net_device *, struct ieee_ets *);
+	int (*ieee_setets) (struct net_device *, struct ieee_ets *);
+	int (*ieee_getpfc) (struct net_device *, struct ieee_pfc *);
+	int (*ieee_setpfc) (struct net_device *, struct ieee_pfc *);
+	int (*ieee_getapp) (struct net_device *, struct dcb_app *);
+	int (*ieee_setapp) (struct net_device *, struct dcb_app *);
+	int (*ieee_delapp) (struct net_device *, struct dcb_app *);
+	int (*ieee_peer_getets) (struct net_device *, struct ieee_ets *);
+	int (*ieee_peer_getpfc) (struct net_device *, struct ieee_pfc *);
+
+	/* CEE std */
+	u8   (*getstate)(struct net_device *);
+	u8   (*setstate)(struct net_device *, u8);
+	void (*getpermhwaddr)(struct net_device *, u8 *);
+	void (*setpgtccfgtx)(struct net_device *, int, u8, u8, u8, u8);
+	void (*setpgbwgcfgtx)(struct net_device *, int, u8);
+	void (*setpgtccfgrx)(struct net_device *, int, u8, u8, u8, u8);
+	void (*setpgbwgcfgrx)(struct net_device *, int, u8);
+	void (*getpgtccfgtx)(struct net_device *, int, u8 *, u8 *, u8 *, u8 *);
+	void (*getpgbwgcfgtx)(struct net_device *, int, u8 *);
+	void (*getpgtccfgrx)(struct net_device *, int, u8 *, u8 *, u8 *, u8 *);
+	void (*getpgbwgcfgrx)(struct net_device *, int, u8 *);
+	void (*setpfccfg)(struct net_device *, int, u8);
+	void (*getpfccfg)(struct net_device *, int, u8 *);
+	u8   (*setall)(struct net_device *);
+	u8   (*getcap)(struct net_device *, int, u8 *);
+	int  (*getnumtcs)(struct net_device *, int, u8 *);
+	int  (*setnumtcs)(struct net_device *, int, u8);
+	u8   (*getpfcstate)(struct net_device *);
+	void (*setpfcstate)(struct net_device *, u8);
+	void (*getbcncfg)(struct net_device *, int, u32 *);
+	void (*setbcncfg)(struct net_device *, int, u32);
+	void (*getbcnrp)(struct net_device *, int, u8 *);
+	void (*setbcnrp)(struct net_device *, int, u8);
+	u8   (*setapp)(struct net_device *, u8, u16, u8);
+	u8   (*getapp)(struct net_device *, u8, u16);
+	u8   (*getfeatcfg)(struct net_device *, int, u8 *);
+	u8   (*setfeatcfg)(struct net_device *, int, u8);
+
+	/* DCBX configuration */
+	u8   (*getdcbx)(struct net_device *);
+	u8   (*setdcbx)(struct net_device *, u8);
+
+	/* peer apps */
+	int (*peer_getappinfo)(struct net_device *, struct dcb_peer_app_info *,
+			       u16 *);
+	int (*peer_getapptable)(struct net_device *, struct dcb_app *);
+
+	/* CEE peer */
+	int (*cee_peer_getpg) (struct net_device *, struct cee_pg *);
+	int (*cee_peer_getpfc) (struct net_device *, struct cee_pfc *);
+};
+
+#endif /* __NET_DCBNL_H__ */
diff --git a/include/net/dn.h b/include/net/dn.h
new file mode 100644
index 00000000..814af0b9
--- /dev/null
+++ b/include/net/dn.h
@@ -0,0 +1,233 @@
+#ifndef _NET_DN_H
+#define _NET_DN_H
+
+#include <linux/dn.h>
+#include <net/sock.h>
+#include <net/flow.h>
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+
+struct dn_scp                                   /* Session Control Port */
+{
+        unsigned char           state;
+#define DN_O     1                      /* Open                 */
+#define DN_CR    2                      /* Connect Receive      */
+#define DN_DR    3                      /* Disconnect Reject    */
+#define DN_DRC   4                      /* Discon. Rej. Complete*/
+#define DN_CC    5                      /* Connect Confirm      */
+#define DN_CI    6                      /* Connect Initiate     */
+#define DN_NR    7                      /* No resources         */
+#define DN_NC    8                      /* No communication     */
+#define DN_CD    9                      /* Connect Delivery     */
+#define DN_RJ    10                     /* Rejected             */
+#define DN_RUN   11                     /* Running              */
+#define DN_DI    12                     /* Disconnect Initiate  */
+#define DN_DIC   13                     /* Disconnect Complete  */
+#define DN_DN    14                     /* Disconnect Notificat */
+#define DN_CL    15                     /* Closed               */
+#define DN_CN    16                     /* Closed Notification  */
+
+        __le16          addrloc;
+        __le16          addrrem;
+        __u16          numdat;
+        __u16          numoth;
+        __u16          numoth_rcv;
+        __u16          numdat_rcv;
+        __u16          ackxmt_dat;
+        __u16          ackxmt_oth;
+        __u16          ackrcv_dat;
+        __u16          ackrcv_oth;
+        __u8           flowrem_sw;
+	__u8           flowloc_sw;
+#define DN_SEND         2
+#define DN_DONTSEND     1
+#define DN_NOCHANGE     0
+	__u16		flowrem_dat;
+	__u16		flowrem_oth;
+	__u16		flowloc_dat;
+	__u16		flowloc_oth;
+	__u8		services_rem;
+	__u8		services_loc;
+	__u8		info_rem;
+	__u8		info_loc;
+
+	__u16		segsize_rem;
+	__u16		segsize_loc;
+
+	__u8		nonagle;
+	__u8		multi_ireq;
+	__u8		accept_mode;
+	unsigned long		seg_total; /* Running total of current segment */
+
+	struct optdata_dn     conndata_in;
+	struct optdata_dn     conndata_out;
+	struct optdata_dn     discdata_in;
+	struct optdata_dn     discdata_out;
+        struct accessdata_dn  accessdata;
+
+        struct sockaddr_dn addr; /* Local address  */
+	struct sockaddr_dn peer; /* Remote address */
+
+	/*
+	 * In this case the RTT estimation is not specified in the
+	 * docs, nor is any back off algorithm. Here we follow well
+	 * known tcp algorithms with a few small variations.
+	 *
+	 * snd_window: Max number of packets we send before we wait for
+	 *             an ack to come back. This will become part of a
+	 *             more complicated scheme when we support flow
+	 *             control.
+	 *
+	 * nsp_srtt:   Round-Trip-Time (x8) in jiffies. This is a rolling
+	 *             average.
+	 * nsp_rttvar: Round-Trip-Time-Varience (x4) in jiffies. This is the
+	 *             varience of the smoothed average (but calculated in
+	 *             a simpler way than for normal statistical varience
+	 *             calculations).
+	 *
+	 * nsp_rxtshift: Backoff counter. Value is zero normally, each time
+	 *               a packet is lost is increases by one until an ack
+	 *               is received. Its used to index an array of backoff
+	 *               multipliers.
+	 */
+#define NSP_MIN_WINDOW 1
+#define NSP_MAX_WINDOW (0x07fe)
+	unsigned long max_window;
+	unsigned long snd_window;
+#define NSP_INITIAL_SRTT (HZ)
+	unsigned long nsp_srtt;
+#define NSP_INITIAL_RTTVAR (HZ*3)
+	unsigned long nsp_rttvar;
+#define NSP_MAXRXTSHIFT 12
+	unsigned long nsp_rxtshift;
+
+	/*
+	 * Output queues, one for data, one for otherdata/linkservice
+	 */
+	struct sk_buff_head data_xmit_queue;
+	struct sk_buff_head other_xmit_queue;
+
+	/*
+	 * Input queue for other data
+	 */
+	struct sk_buff_head other_receive_queue;
+	int other_report;
+
+	/*
+	 * Stuff to do with the slow timer
+	 */
+	unsigned long stamp;          /* time of last transmit */
+	unsigned long persist;
+	int (*persist_fxn)(struct sock *sk);
+	unsigned long keepalive;
+	void (*keepalive_fxn)(struct sock *sk);
+
+	/*
+	 * This stuff is for the fast timer for delayed acks
+	 */
+	struct timer_list delack_timer;
+	int delack_pending;
+	void (*delack_fxn)(struct sock *sk);
+
+};
+
+static inline struct dn_scp *DN_SK(struct sock *sk)
+{
+	return (struct dn_scp *)(sk + 1);
+}
+
+/*
+ * src,dst : Source and Destination DECnet addresses
+ * hops : Number of hops through the network
+ * dst_port, src_port : NSP port numbers
+ * services, info : Useful data extracted from conninit messages
+ * rt_flags : Routing flags byte
+ * nsp_flags : NSP layer flags byte
+ * segsize : Size of segment
+ * segnum : Number, for data, otherdata and linkservice
+ * xmit_count : Number of times we've transmitted this skb
+ * stamp : Time stamp of most recent transmission, used in RTT calculations
+ * iif: Input interface number
+ *
+ * As a general policy, this structure keeps all addresses in network
+ * byte order, and all else in host byte order. Thus dst, src, dst_port
+ * and src_port are in network order. All else is in host order.
+ * 
+ */
+#define DN_SKB_CB(skb) ((struct dn_skb_cb *)(skb)->cb)
+struct dn_skb_cb {
+	__le16 dst;
+	__le16 src;
+	__u16 hops;
+	__le16 dst_port;
+	__le16 src_port;
+	__u8 services;
+	__u8 info;
+	__u8 rt_flags;
+	__u8 nsp_flags;
+	__u16 segsize;
+	__u16 segnum;
+	__u16 xmit_count;
+	unsigned long stamp;
+	int iif;
+};
+
+static inline __le16 dn_eth2dn(unsigned char *ethaddr)
+{
+	return get_unaligned((__le16 *)(ethaddr + 4));
+}
+
+static inline __le16 dn_saddr2dn(struct sockaddr_dn *saddr)
+{
+	return *(__le16 *)saddr->sdn_nodeaddr;
+}
+
+static inline void dn_dn2eth(unsigned char *ethaddr, __le16 addr)
+{
+	__u16 a = le16_to_cpu(addr);
+	ethaddr[0] = 0xAA;
+	ethaddr[1] = 0x00;
+	ethaddr[2] = 0x04;
+	ethaddr[3] = 0x00;
+	ethaddr[4] = (__u8)(a & 0xff);
+	ethaddr[5] = (__u8)(a >> 8);
+}
+
+static inline void dn_sk_ports_copy(struct flowidn *fld, struct dn_scp *scp)
+{
+	fld->fld_sport = scp->addrloc;
+	fld->fld_dport = scp->addrrem;
+}
+
+extern unsigned dn_mss_from_pmtu(struct net_device *dev, int mtu);
+
+#define DN_MENUVER_ACC 0x01
+#define DN_MENUVER_USR 0x02
+#define DN_MENUVER_PRX 0x04
+#define DN_MENUVER_UIC 0x08
+
+extern struct sock *dn_sklist_find_listener(struct sockaddr_dn *addr);
+extern struct sock *dn_find_by_skb(struct sk_buff *skb);
+#define DN_ASCBUF_LEN 9
+extern char *dn_addr2asc(__u16, char *);
+extern int dn_destroy_timer(struct sock *sk);
+
+extern int dn_sockaddr2username(struct sockaddr_dn *addr, unsigned char *buf, unsigned char type);
+extern int dn_username2sockaddr(unsigned char *data, int len, struct sockaddr_dn *addr, unsigned char *type);
+
+extern void dn_start_slow_timer(struct sock *sk);
+extern void dn_stop_slow_timer(struct sock *sk);
+
+extern __le16 decnet_address;
+extern int decnet_debug_level;
+extern int decnet_time_wait;
+extern int decnet_dn_count;
+extern int decnet_di_count;
+extern int decnet_dr_count;
+extern int decnet_no_fc_max_cwnd;
+
+extern long sysctl_decnet_mem[3];
+extern int sysctl_decnet_wmem[3];
+extern int sysctl_decnet_rmem[3];
+
+#endif /* _NET_DN_H */
diff --git a/include/net/dn_dev.h b/include/net/dn_dev.h
new file mode 100644
index 00000000..b9e32db0
--- /dev/null
+++ b/include/net/dn_dev.h
@@ -0,0 +1,198 @@
+#ifndef _NET_DN_DEV_H
+#define _NET_DN_DEV_H
+
+
+struct dn_dev;
+
+struct dn_ifaddr {
+	struct dn_ifaddr __rcu *ifa_next;
+	struct dn_dev    *ifa_dev;
+	__le16            ifa_local;
+	__le16            ifa_address;
+	__u8              ifa_flags;
+	__u8              ifa_scope;
+	char              ifa_label[IFNAMSIZ];
+	struct rcu_head   rcu;
+};
+
+#define DN_DEV_S_RU  0 /* Run - working normally   */
+#define DN_DEV_S_CR  1 /* Circuit Rejected         */
+#define DN_DEV_S_DS  2 /* Data Link Start          */
+#define DN_DEV_S_RI  3 /* Routing Layer Initialize */
+#define DN_DEV_S_RV  4 /* Routing Layer Verify     */
+#define DN_DEV_S_RC  5 /* Routing Layer Complete   */
+#define DN_DEV_S_OF  6 /* Off                      */
+#define DN_DEV_S_HA  7 /* Halt                     */
+
+
+/*
+ * The dn_dev_parms structure contains the set of parameters
+ * for each device (hence inclusion in the dn_dev structure)
+ * and an array is used to store the default types of supported
+ * device (in dn_dev.c).
+ *
+ * The type field matches the ARPHRD_ constants and is used in
+ * searching the list for supported devices when new devices
+ * come up.
+ *
+ * The mode field is used to find out if a device is broadcast,
+ * multipoint, or pointopoint. Please note that DECnet thinks
+ * different ways about devices to the rest of the kernel
+ * so the normal IFF_xxx flags are invalid here. For devices
+ * which can be any combination of the previously mentioned
+ * attributes, you can set this on a per device basis by
+ * installing an up() routine.
+ *
+ * The device state field, defines the initial state in which the
+ * device will come up. In the dn_dev structure, it is the actual
+ * state.
+ *
+ * Things have changed here. I've killed timer1 since it's a user space
+ * issue for a user space routing deamon to sort out. The kernel does
+ * not need to be bothered with it.
+ *
+ * Timers:
+ * t2 - Rate limit timer, min time between routing and hello messages
+ * t3 - Hello timer, send hello messages when it expires
+ *
+ * Callbacks:
+ * up() - Called to initialize device, return value can veto use of
+ *        device with DECnet.
+ * down() - Called to turn device off when it goes down
+ * timer3() - Called once for each ifaddr when timer 3 goes off
+ * 
+ * sysctl - Hook for sysctl things
+ *
+ */
+struct dn_dev_parms {
+	int type;	          /* ARPHRD_xxx                         */
+	int mode;	          /* Broadcast, Unicast, Mulitpoint     */
+#define DN_DEV_BCAST  1
+#define DN_DEV_UCAST  2
+#define DN_DEV_MPOINT 4
+	int state;                /* Initial state                      */
+	int forwarding;	          /* 0=EndNode, 1=L1Router, 2=L2Router  */
+	unsigned long t2;         /* Default value of t2                */
+	unsigned long t3;         /* Default value of t3                */
+	int priority;             /* Priority to be a router            */
+	char *name;               /* Name for sysctl                    */
+	int  (*up)(struct net_device *);
+	void (*down)(struct net_device *);
+	void (*timer3)(struct net_device *, struct dn_ifaddr *ifa);
+	void *sysctl;
+};
+
+
+struct dn_dev {
+	struct dn_ifaddr __rcu *ifa_list;
+	struct net_device *dev;
+	struct dn_dev_parms parms;
+	char use_long;
+	struct timer_list timer;
+	unsigned long t3;
+	struct neigh_parms *neigh_parms;
+	__u8 addr[ETH_ALEN];
+	struct neighbour *router; /* Default router on circuit */
+	struct neighbour *peer;   /* Peer on pointopoint links */
+	unsigned long uptime;     /* Time device went up in jiffies */
+};
+
+struct dn_short_packet {
+	__u8    msgflg;
+	__le16 dstnode;
+	__le16 srcnode;
+	__u8   forward;
+} __packed;
+
+struct dn_long_packet {
+	__u8   msgflg;
+	__u8   d_area;
+	__u8   d_subarea;
+	__u8   d_id[6];
+	__u8   s_area;
+	__u8   s_subarea;
+	__u8   s_id[6];
+	__u8   nl2;
+	__u8   visit_ct;
+	__u8   s_class;
+	__u8   pt;
+} __packed;
+
+/*------------------------- DRP - Routing messages ---------------------*/
+
+struct endnode_hello_message {
+	__u8   msgflg;
+	__u8   tiver[3];
+	__u8   id[6];
+	__u8   iinfo;
+	__le16 blksize;
+	__u8   area;
+	__u8   seed[8];
+	__u8   neighbor[6];
+	__le16 timer;
+	__u8   mpd;
+	__u8   datalen;
+	__u8   data[2];
+} __packed;
+
+struct rtnode_hello_message {
+	__u8   msgflg;
+	__u8   tiver[3];
+	__u8   id[6];
+	__u8   iinfo;
+	__le16  blksize;
+	__u8   priority;
+	__u8   area;
+	__le16  timer;
+	__u8   mpd;
+} __packed;
+
+
+extern void dn_dev_init(void);
+extern void dn_dev_cleanup(void);
+
+extern int dn_dev_ioctl(unsigned int cmd, void __user *arg);
+
+extern void dn_dev_devices_off(void);
+extern void dn_dev_devices_on(void);
+
+extern void dn_dev_init_pkt(struct sk_buff *skb);
+extern void dn_dev_veri_pkt(struct sk_buff *skb);
+extern void dn_dev_hello(struct sk_buff *skb);
+
+extern void dn_dev_up(struct net_device *);
+extern void dn_dev_down(struct net_device *);
+
+extern int dn_dev_set_default(struct net_device *dev, int force);
+extern struct net_device *dn_dev_get_default(void);
+extern int dn_dev_bind_default(__le16 *addr);
+
+extern int register_dnaddr_notifier(struct notifier_block *nb);
+extern int unregister_dnaddr_notifier(struct notifier_block *nb);
+
+static inline int dn_dev_islocal(struct net_device *dev, __le16 addr)
+{
+	struct dn_dev *dn_db;
+	struct dn_ifaddr *ifa;
+	int res = 0;
+
+	rcu_read_lock();
+	dn_db = rcu_dereference(dev->dn_ptr);
+	if (dn_db == NULL) {
+		printk(KERN_DEBUG "dn_dev_islocal: Called for non DECnet device\n");
+		goto out;
+	}
+
+	for (ifa = rcu_dereference(dn_db->ifa_list);
+	     ifa != NULL;
+	     ifa = rcu_dereference(ifa->ifa_next))
+		if ((addr ^ ifa->ifa_local) == 0) {
+			res = 1;
+			break;
+		}
+out:
+	rcu_read_unlock();
+	return res;
+}
+
+#endif /* _NET_DN_DEV_H */
diff --git a/include/net/dn_fib.h b/include/net/dn_fib.h
new file mode 100644
index 00000000..782ef7cb
--- /dev/null
+++ b/include/net/dn_fib.h
@@ -0,0 +1,184 @@
+#ifndef _NET_DN_FIB_H
+#define _NET_DN_FIB_H
+
+/* WARNING: The ordering of these elements must match ordering
+ *          of RTA_* rtnetlink attribute numbers.
+ */
+struct dn_kern_rta {
+        void            *rta_dst;
+        void            *rta_src;
+        int             *rta_iif;
+        int             *rta_oif;
+        void            *rta_gw;
+        u32             *rta_priority;
+        void            *rta_prefsrc;
+        struct rtattr   *rta_mx;
+        struct rtattr   *rta_mp;
+        unsigned char   *rta_protoinfo;
+        u32             *rta_flow;
+        struct rta_cacheinfo *rta_ci;
+	struct rta_session *rta_sess;
+};
+
+struct dn_fib_res {
+	struct fib_rule *r;
+	struct dn_fib_info *fi;
+	unsigned char prefixlen;
+	unsigned char nh_sel;
+	unsigned char type;
+	unsigned char scope;
+};
+
+struct dn_fib_nh {
+	struct net_device	*nh_dev;
+	unsigned		nh_flags;
+	unsigned char		nh_scope;
+	int			nh_weight;
+	int			nh_power;
+	int			nh_oif;
+	__le16			nh_gw;
+};
+
+struct dn_fib_info {
+	struct dn_fib_info	*fib_next;
+	struct dn_fib_info	*fib_prev;
+	int 			fib_treeref;
+	atomic_t		fib_clntref;
+	int			fib_dead;
+	unsigned		fib_flags;
+	int			fib_protocol;
+	__le16			fib_prefsrc;
+	__u32			fib_priority;
+	__u32			fib_metrics[RTAX_MAX];
+	int			fib_nhs;
+	int			fib_power;
+	struct dn_fib_nh	fib_nh[0];
+#define dn_fib_dev		fib_nh[0].nh_dev
+};
+
+
+#define DN_FIB_RES_RESET(res)	((res).nh_sel = 0)
+#define DN_FIB_RES_NH(res)	((res).fi->fib_nh[(res).nh_sel])
+
+#define DN_FIB_RES_PREFSRC(res)	((res).fi->fib_prefsrc ? : __dn_fib_res_prefsrc(&res))
+#define DN_FIB_RES_GW(res)	(DN_FIB_RES_NH(res).nh_gw)
+#define DN_FIB_RES_DEV(res)	(DN_FIB_RES_NH(res).nh_dev)
+#define DN_FIB_RES_OIF(res)	(DN_FIB_RES_NH(res).nh_oif)
+
+typedef struct {
+	__le16	datum;
+} dn_fib_key_t;
+
+typedef struct {
+	__le16	datum;
+} dn_fib_hash_t;
+
+typedef struct {
+	__u16	datum;
+} dn_fib_idx_t;
+
+struct dn_fib_node {
+	struct dn_fib_node *fn_next;
+	struct dn_fib_info *fn_info;
+#define DN_FIB_INFO(f) ((f)->fn_info)
+	dn_fib_key_t	fn_key;
+	u8		fn_type;
+	u8		fn_scope;
+	u8		fn_state;
+};
+
+
+struct dn_fib_table {
+	struct hlist_node hlist;
+	u32 n;
+
+	int (*insert)(struct dn_fib_table *t, struct rtmsg *r, 
+			struct dn_kern_rta *rta, struct nlmsghdr *n, 
+			struct netlink_skb_parms *req);
+	int (*delete)(struct dn_fib_table *t, struct rtmsg *r,
+			struct dn_kern_rta *rta, struct nlmsghdr *n,
+			struct netlink_skb_parms *req);
+	int (*lookup)(struct dn_fib_table *t, const struct flowidn *fld,
+			struct dn_fib_res *res);
+	int (*flush)(struct dn_fib_table *t);
+	int (*dump)(struct dn_fib_table *t, struct sk_buff *skb, struct netlink_callback *cb);
+
+	unsigned char data[0];
+};
+
+#ifdef CONFIG_DECNET_ROUTER
+/*
+ * dn_fib.c
+ */
+extern void dn_fib_init(void);
+extern void dn_fib_cleanup(void);
+
+extern int dn_fib_ioctl(struct socket *sock, unsigned int cmd, 
+			unsigned long arg);
+extern struct dn_fib_info *dn_fib_create_info(const struct rtmsg *r, 
+				struct dn_kern_rta *rta, 
+				const struct nlmsghdr *nlh, int *errp);
+extern int dn_fib_semantic_match(int type, struct dn_fib_info *fi, 
+			const struct flowidn *fld,
+			struct dn_fib_res *res);
+extern void dn_fib_release_info(struct dn_fib_info *fi);
+extern __le16 dn_fib_get_attr16(struct rtattr *attr, int attrlen, int type);
+extern void dn_fib_flush(void);
+extern void dn_fib_select_multipath(const struct flowidn *fld,
+					struct dn_fib_res *res);
+
+/*
+ * dn_tables.c
+ */
+extern struct dn_fib_table *dn_fib_get_table(u32 n, int creat);
+extern struct dn_fib_table *dn_fib_empty_table(void);
+extern void dn_fib_table_init(void);
+extern void dn_fib_table_cleanup(void);
+
+/*
+ * dn_rules.c
+ */
+extern void dn_fib_rules_init(void);
+extern void dn_fib_rules_cleanup(void);
+extern unsigned dnet_addr_type(__le16 addr);
+extern int dn_fib_lookup(struct flowidn *fld, struct dn_fib_res *res);
+
+extern int dn_fib_dump(struct sk_buff *skb, struct netlink_callback *cb);
+
+extern void dn_fib_free_info(struct dn_fib_info *fi);
+
+static inline void dn_fib_info_put(struct dn_fib_info *fi)
+{
+	if (atomic_dec_and_test(&fi->fib_clntref))
+		dn_fib_free_info(fi);
+}
+
+static inline void dn_fib_res_put(struct dn_fib_res *res)
+{
+	if (res->fi)
+		dn_fib_info_put(res->fi);
+	if (res->r)
+		fib_rule_put(res->r);
+}
+
+#else /* Endnode */
+
+#define dn_fib_init()  do { } while(0)
+#define dn_fib_cleanup() do { } while(0)
+
+#define dn_fib_lookup(fl, res) (-ESRCH)
+#define dn_fib_info_put(fi) do { } while(0)
+#define dn_fib_select_multipath(fl, res) do { } while(0)
+#define dn_fib_rules_policy(saddr,res,flags) (0)
+#define dn_fib_res_put(res) do { } while(0)
+
+#endif /* CONFIG_DECNET_ROUTER */
+
+static inline __le16 dnet_make_mask(int n)
+{
+	if (n)
+		return cpu_to_le16(~((1 << (16 - n)) - 1));
+	return cpu_to_le16(0);
+}
+
+#endif /* _NET_DN_FIB_H */
diff --git a/include/net/dn_neigh.h b/include/net/dn_neigh.h
new file mode 100644
index 00000000..4cb4ae7f
--- /dev/null
+++ b/include/net/dn_neigh.h
@@ -0,0 +1,28 @@
+#ifndef _NET_DN_NEIGH_H
+#define _NET_DN_NEIGH_H
+
+/*
+ * The position of the first two fields of
+ * this structure are critical - SJW
+ */
+struct dn_neigh {
+        struct neighbour n;
+	__le16 addr;
+        unsigned long flags;
+#define DN_NDFLAG_R1    0x0001 /* Router L1      */
+#define DN_NDFLAG_R2    0x0002 /* Router L2      */
+#define DN_NDFLAG_P3    0x0004 /* Phase III Node */
+        unsigned long blksize;
+	__u8 priority;
+};
+
+extern void dn_neigh_init(void);
+extern void dn_neigh_cleanup(void);
+extern int dn_neigh_router_hello(struct sk_buff *skb);
+extern int dn_neigh_endnode_hello(struct sk_buff *skb);
+extern void dn_neigh_pointopoint_hello(struct sk_buff *skb);
+extern int dn_neigh_elist(struct net_device *dev, unsigned char *ptr, int n);
+
+extern struct neigh_table dn_neigh_table;
+
+#endif /* _NET_DN_NEIGH_H */
diff --git a/include/net/dn_nsp.h b/include/net/dn_nsp.h
new file mode 100644
index 00000000..e43a2893
--- /dev/null
+++ b/include/net/dn_nsp.h
@@ -0,0 +1,201 @@
+#ifndef _NET_DN_NSP_H
+#define _NET_DN_NSP_H
+/******************************************************************************
+    (c) 1995-1998 E.M. Serrat		emserrat@geocities.com
+    
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+*******************************************************************************/
+/* dn_nsp.c functions prototyping */
+
+extern void dn_nsp_send_data_ack(struct sock *sk);
+extern void dn_nsp_send_oth_ack(struct sock *sk);
+extern void dn_nsp_delayed_ack(struct sock *sk);
+extern void dn_send_conn_ack(struct sock *sk);
+extern void dn_send_conn_conf(struct sock *sk, gfp_t gfp);
+extern void dn_nsp_send_disc(struct sock *sk, unsigned char type, 
+			unsigned short reason, gfp_t gfp);
+extern void dn_nsp_return_disc(struct sk_buff *skb, unsigned char type,
+				unsigned short reason);
+extern void dn_nsp_send_link(struct sock *sk, unsigned char lsflags, char fcval);
+extern void dn_nsp_send_conninit(struct sock *sk, unsigned char flags);
+
+extern void dn_nsp_output(struct sock *sk);
+extern int dn_nsp_check_xmit_queue(struct sock *sk, struct sk_buff *skb, struct sk_buff_head *q, unsigned short acknum);
+extern void dn_nsp_queue_xmit(struct sock *sk, struct sk_buff *skb, gfp_t gfp, int oob);
+extern unsigned long dn_nsp_persist(struct sock *sk);
+extern int dn_nsp_xmit_timeout(struct sock *sk);
+
+extern int dn_nsp_rx(struct sk_buff *);
+extern int dn_nsp_backlog_rcv(struct sock *sk, struct sk_buff *skb);
+
+extern struct sk_buff *dn_alloc_skb(struct sock *sk, int size, gfp_t pri);
+extern struct sk_buff *dn_alloc_send_skb(struct sock *sk, size_t *size, int noblock, long timeo, int *err);
+
+#define NSP_REASON_OK 0		/* No error */
+#define NSP_REASON_NR 1		/* No resources */
+#define NSP_REASON_UN 2		/* Unrecognised node name */
+#define NSP_REASON_SD 3		/* Node shutting down */
+#define NSP_REASON_ID 4		/* Invalid destination end user */
+#define NSP_REASON_ER 5		/* End user lacks resources */
+#define NSP_REASON_OB 6		/* Object too busy */
+#define NSP_REASON_US 7		/* Unspecified error */
+#define NSP_REASON_TP 8		/* Third-Party abort */
+#define NSP_REASON_EA 9		/* End user has aborted the link */
+#define NSP_REASON_IF 10	/* Invalid node name format */
+#define NSP_REASON_LS 11	/* Local node shutdown */
+#define NSP_REASON_LL 32	/* Node lacks logical-link resources */
+#define NSP_REASON_LE 33	/* End user lacks logical-link resources */
+#define NSP_REASON_UR 34	/* Unacceptable RQSTRID or PASSWORD field */
+#define NSP_REASON_UA 36	/* Unacceptable ACCOUNT field */
+#define NSP_REASON_TM 38	/* End user timed out logical link */
+#define NSP_REASON_NU 39	/* Node unreachable */
+#define NSP_REASON_NL 41	/* No-link message */
+#define NSP_REASON_DC 42	/* Disconnect confirm */
+#define NSP_REASON_IO 43	/* Image data field overflow */
+
+#define NSP_DISCINIT 0x38
+#define NSP_DISCCONF 0x48
+
+/*------------------------- NSP - messages ------------------------------*/
+/* Data Messages */
+/*---------------*/
+
+/* Data Messages    (data segment/interrupt/link service)               */
+
+struct nsp_data_seg_msg {
+	__u8   msgflg;
+	__le16 dstaddr;
+	__le16 srcaddr;
+} __packed;
+
+struct nsp_data_opt_msg {
+	__le16 acknum;
+	__le16 segnum;
+	__le16 lsflgs;
+} __packed;
+
+struct nsp_data_opt_msg1 {
+	__le16 acknum;
+	__le16 segnum;
+} __packed;
+
+
+/* Acknowledgment Message (data/other data)                             */
+struct nsp_data_ack_msg {
+	__u8   msgflg;
+	__le16 dstaddr;
+	__le16 srcaddr;
+	__le16 acknum;
+} __packed;
+
+/* Connect Acknowledgment Message */
+struct  nsp_conn_ack_msg {
+	__u8 msgflg;
+	__le16 dstaddr;
+} __packed;
+
+
+/* Connect Initiate/Retransmit Initiate/Connect Confirm */
+struct  nsp_conn_init_msg {
+	__u8   msgflg;
+#define NSP_CI      0x18            /* Connect Initiate     */
+#define NSP_RCI     0x68            /* Retrans. Conn Init   */
+	__le16 dstaddr;
+	__le16 srcaddr;
+	__u8   services;
+#define NSP_FC_NONE   0x00            /* Flow Control None    */
+#define NSP_FC_SRC    0x04            /* Seg Req. Count       */
+#define NSP_FC_SCMC   0x08            /* Sess. Control Mess   */
+#define NSP_FC_MASK   0x0c            /* FC type mask         */
+	__u8   info;
+	__le16 segsize;
+} __packed;
+
+/* Disconnect Initiate/Disconnect Confirm */
+struct  nsp_disconn_init_msg {
+	__u8   msgflg;
+	__le16 dstaddr;
+	__le16 srcaddr;
+	__le16 reason;
+} __packed;
+
+
+
+struct  srcobj_fmt {
+	__u8   format;
+	__u8   task;
+	__le16 grpcode;
+	__le16 usrcode;
+	__u8   dlen;
+} __packed;
+
+/*
+ * A collection of functions for manipulating the sequence
+ * numbers used in NSP. Similar in operation to the functions
+ * of the same name in TCP.
+ */
+static __inline__ int dn_before(__u16 seq1, __u16 seq2)
+{
+        seq1 &= 0x0fff;
+        seq2 &= 0x0fff;
+
+        return (int)((seq1 - seq2) & 0x0fff) > 2048;
+}
+
+
+static __inline__ int dn_after(__u16 seq1, __u16 seq2)
+{
+        seq1 &= 0x0fff;
+        seq2 &= 0x0fff;
+
+        return (int)((seq2 - seq1) & 0x0fff) > 2048;
+}
+
+static __inline__ int dn_equal(__u16 seq1, __u16 seq2)
+{
+        return ((seq1 ^ seq2) & 0x0fff) == 0;
+}
+
+static __inline__ int dn_before_or_equal(__u16 seq1, __u16 seq2)
+{
+	return (dn_before(seq1, seq2) || dn_equal(seq1, seq2));
+}
+
+static __inline__ void seq_add(__u16 *seq, __u16 off)
+{
+        (*seq) += off;
+        (*seq) &= 0x0fff;
+}
+
+static __inline__ int seq_next(__u16 seq1, __u16 seq2)
+{
+	return dn_equal(seq1 + 1, seq2);
+}
+
+/*
+ * Can we delay the ack ?
+ */
+static __inline__ int sendack(__u16 seq)
+{
+        return (int)((seq & 0x1000) ? 0 : 1);
+}
+
+/*
+ * Is socket congested ?
+ */
+static __inline__ int dn_congested(struct sock *sk)
+{
+        return atomic_read(&sk->sk_rmem_alloc) > (sk->sk_rcvbuf >> 1);
+}
+
+#define DN_MAX_NSP_DATA_HEADER (11)
+
+#endif /* _NET_DN_NSP_H */
diff --git a/include/net/dn_route.h b/include/net/dn_route.h
new file mode 100644
index 00000000..81712cfa
--- /dev/null
+++ b/include/net/dn_route.h
@@ -0,0 +1,117 @@
+#ifndef _NET_DN_ROUTE_H
+#define _NET_DN_ROUTE_H
+
+/******************************************************************************
+    (c) 1995-1998 E.M. Serrat		emserrat@geocities.com
+    
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+*******************************************************************************/
+
+extern struct sk_buff *dn_alloc_skb(struct sock *sk, int size, gfp_t pri);
+extern int dn_route_output_sock(struct dst_entry **pprt, struct flowidn *, struct sock *sk, int flags);
+extern int dn_cache_dump(struct sk_buff *skb, struct netlink_callback *cb);
+extern void dn_rt_cache_flush(int delay);
+
+/* Masks for flags field */
+#define DN_RT_F_PID 0x07 /* Mask for packet type                      */
+#define DN_RT_F_PF  0x80 /* Padding Follows                           */
+#define DN_RT_F_VER 0x40 /* Version =0 discard packet if ==1          */
+#define DN_RT_F_IE  0x20 /* Intra Ethernet, Reserved in short pkt     */
+#define DN_RT_F_RTS 0x10 /* Packet is being returned to sender        */
+#define DN_RT_F_RQR 0x08 /* Return packet to sender upon non-delivery */
+
+/* Mask for types of routing packets */
+#define DN_RT_PKT_MSK   0x06
+/* Types of routing packets */
+#define DN_RT_PKT_SHORT 0x02 /* Short routing packet */
+#define DN_RT_PKT_LONG  0x06 /* Long routing packet  */
+
+/* Mask for control/routing selection */
+#define DN_RT_PKT_CNTL  0x01 /* Set to 1 if a control packet  */
+/* Types of control packets */
+#define DN_RT_CNTL_MSK  0x0f /* Mask for control packets      */
+#define DN_RT_PKT_INIT  0x01 /* Initialisation packet         */
+#define DN_RT_PKT_VERI  0x03 /* Verification Message          */
+#define DN_RT_PKT_HELO  0x05 /* Hello and Test Message        */
+#define DN_RT_PKT_L1RT  0x07 /* Level 1 Routing Message       */
+#define DN_RT_PKT_L2RT  0x09 /* Level 2 Routing Message       */
+#define DN_RT_PKT_ERTH  0x0b /* Ethernet Router Hello         */
+#define DN_RT_PKT_EEDH  0x0d /* Ethernet EndNode Hello        */
+
+/* Values for info field in hello message */
+#define DN_RT_INFO_TYPE 0x03 /* Type mask                     */
+#define DN_RT_INFO_L1RT 0x02 /* L1 Router                     */
+#define DN_RT_INFO_L2RT 0x01 /* L2 Router                     */
+#define DN_RT_INFO_ENDN 0x03 /* EndNode                       */
+#define DN_RT_INFO_VERI 0x04 /* Verification Reqd.            */
+#define DN_RT_INFO_RJCT 0x08 /* Reject Flag, Reserved         */
+#define DN_RT_INFO_VFLD 0x10 /* Verification Failed, Reserved */
+#define DN_RT_INFO_NOML 0x20 /* No Multicast traffic accepted */
+#define DN_RT_INFO_BLKR 0x40 /* Blocking Requested            */
+
+/*
+ * The fl structure is what we used to look up the route.
+ * The rt_saddr & rt_daddr entries are the same as key.saddr & key.daddr
+ * except for local input routes, where the rt_saddr = fl.fld_dst and
+ * rt_daddr = fl.fld_src to allow the route to be used for returning
+ * packets to the originating host.
+ */
+struct dn_route {
+	struct dst_entry dst;
+
+	struct flowidn fld;
+
+	__le16 rt_saddr;
+	__le16 rt_daddr;
+	__le16 rt_gateway;
+	__le16 rt_local_src;	/* Source used for forwarding packets */
+	__le16 rt_src_map;
+	__le16 rt_dst_map;
+
+	unsigned rt_flags;
+	unsigned rt_type;
+};
+
+static inline bool dn_is_input_route(struct dn_route *rt)
+{
+	return rt->fld.flowidn_iif != 0;
+}
+
+static inline bool dn_is_output_route(struct dn_route *rt)
+{
+	return rt->fld.flowidn_iif == 0;
+}
+
+extern void dn_route_init(void);
+extern void dn_route_cleanup(void);
+
+#include <net/sock.h>
+#include <linux/if_arp.h>
+
+static inline void dn_rt_send(struct sk_buff *skb)
+{
+	dev_queue_xmit(skb);
+}
+
+static inline void dn_rt_finish_output(struct sk_buff *skb, char *dst, char *src)
+{
+	struct net_device *dev = skb->dev;
+
+	if ((dev->type != ARPHRD_ETHER) && (dev->type != ARPHRD_LOOPBACK))
+		dst = NULL;
+
+	if (dev_hard_header(skb, dev, ETH_P_DNA_RT, dst, src, skb->len) >= 0)
+		dn_rt_send(skb);
+	else
+		kfree_skb(skb);
+}
+
+#endif /* _NET_DN_ROUTE_H */
diff --git a/include/net/dsa.h b/include/net/dsa.h
new file mode 100644
index 00000000..7828ebf9
--- /dev/null
+++ b/include/net/dsa.h
@@ -0,0 +1,201 @@
+/*
+ * include/net/dsa.h - Driver for Distributed Switch Architecture switch chips
+ * Copyright (c) 2008-2009 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __LINUX_NET_DSA_H
+#define __LINUX_NET_DSA_H
+
+#include <linux/if_ether.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+
+#define DSA_MAX_SWITCHES	4
+#define DSA_MAX_PORTS		12
+
+struct dsa_chip_data {
+	/*
+	 * How to access the switch configuration registers.
+	 */
+	struct device	*mii_bus;
+	int		sw_addr;
+
+	/*
+	 * The names of the switch's ports.  Use "cpu" to
+	 * designate the switch port that the cpu is connected to,
+	 * "dsa" to indicate that this port is a DSA link to
+	 * another switch, NULL to indicate the port is unused,
+	 * or any other string to indicate this is a physical port.
+	 */
+	char		*port_names[DSA_MAX_PORTS];
+
+	/*
+	 * An array (with nr_chips elements) of which element [a]
+	 * indicates which port on this switch should be used to
+	 * send packets to that are destined for switch a.  Can be
+	 * NULL if there is only one switch chip.
+	 */
+	s8		*rtable;
+};
+
+struct dsa_platform_data {
+	/*
+	 * Reference to a Linux network interface that connects
+	 * to the root switch chip of the tree.
+	 */
+	struct device	*netdev;
+
+	/*
+	 * Info structs describing each of the switch chips
+	 * connected via this network interface.
+	 */
+	int		nr_chips;
+	struct dsa_chip_data	*chip;
+};
+
+struct dsa_switch_tree {
+	/*
+	 * Configuration data for the platform device that owns
+	 * this dsa switch tree instance.
+	 */
+	struct dsa_platform_data	*pd;
+
+	/*
+	 * Reference to network device to use, and which tagging
+	 * protocol to use.
+	 */
+	struct net_device	*master_netdev;
+	__be16			tag_protocol;
+
+	/*
+	 * The switch and port to which the CPU is attached.
+	 */
+	s8			cpu_switch;
+	s8			cpu_port;
+
+	/*
+	 * Link state polling.
+	 */
+	int			link_poll_needed;
+	struct work_struct	link_poll_work;
+	struct timer_list	link_poll_timer;
+
+	/*
+	 * Data for the individual switch chips.
+	 */
+	struct dsa_switch	*ds[DSA_MAX_SWITCHES];
+};
+
+struct dsa_switch {
+	/*
+	 * Parent switch tree, and switch index.
+	 */
+	struct dsa_switch_tree	*dst;
+	int			index;
+
+	/*
+	 * Configuration data for this switch.
+	 */
+	struct dsa_chip_data	*pd;
+
+	/*
+	 * The used switch driver.
+	 */
+	struct dsa_switch_driver	*drv;
+
+	/*
+	 * Reference to mii bus to use.
+	 */
+	struct mii_bus		*master_mii_bus;
+
+	/*
+	 * Slave mii_bus and devices for the individual ports.
+	 */
+	u32			dsa_port_mask;
+	u32			phys_port_mask;
+	struct mii_bus		*slave_mii_bus;
+	struct net_device	*ports[DSA_MAX_PORTS];
+};
+
+static inline bool dsa_is_cpu_port(struct dsa_switch *ds, int p)
+{
+	return !!(ds->index == ds->dst->cpu_switch && p == ds->dst->cpu_port);
+}
+
+static inline u8 dsa_upstream_port(struct dsa_switch *ds)
+{
+	struct dsa_switch_tree *dst = ds->dst;
+
+	/*
+	 * If this is the root switch (i.e. the switch that connects
+	 * to the CPU), return the cpu port number on this switch.
+	 * Else return the (DSA) port number that connects to the
+	 * switch that is one hop closer to the cpu.
+	 */
+	if (dst->cpu_switch == ds->index)
+		return dst->cpu_port;
+	else
+		return ds->pd->rtable[dst->cpu_switch];
+}
+
+struct dsa_switch_driver {
+	struct list_head	list;
+
+	__be16			tag_protocol;
+	int			priv_size;
+
+	/*
+	 * Probing and setup.
+	 */
+	char	*(*probe)(struct mii_bus *bus, int sw_addr);
+	int	(*setup)(struct dsa_switch *ds);
+	int	(*set_addr)(struct dsa_switch *ds, u8 *addr);
+
+	/*
+	 * Access to the switch's PHY registers.
+	 */
+	int	(*phy_read)(struct dsa_switch *ds, int port, int regnum);
+	int	(*phy_write)(struct dsa_switch *ds, int port,
+			     int regnum, u16 val);
+
+	/*
+	 * Link state polling and IRQ handling.
+	 */
+	void	(*poll_link)(struct dsa_switch *ds);
+
+	/*
+	 * ethtool hardware statistics.
+	 */
+	void	(*get_strings)(struct dsa_switch *ds, int port, uint8_t *data);
+	void	(*get_ethtool_stats)(struct dsa_switch *ds,
+				     int port, uint64_t *data);
+	int	(*get_sset_count)(struct dsa_switch *ds);
+};
+
+void register_switch_driver(struct dsa_switch_driver *type);
+void unregister_switch_driver(struct dsa_switch_driver *type);
+
+/*
+ * The original DSA tag format and some other tag formats have no
+ * ethertype, which means that we need to add a little hack to the
+ * networking receive path to make sure that received frames get
+ * the right ->protocol assigned to them when one of those tag
+ * formats is in use.
+ */
+static inline bool dsa_uses_dsa_tags(struct dsa_switch_tree *dst)
+{
+	return !!(dst->tag_protocol == htons(ETH_P_DSA));
+}
+
+static inline bool dsa_uses_trailer_tags(struct dsa_switch_tree *dst)
+{
+	return !!(dst->tag_protocol == htons(ETH_P_TRAILER));
+}
+
+#endif
diff --git a/include/net/dsfield.h b/include/net/dsfield.h
new file mode 100644
index 00000000..8a8d4e06
--- /dev/null
+++ b/include/net/dsfield.h
@@ -0,0 +1,54 @@
+/* include/net/dsfield.h - Manipulation of the Differentiated Services field */
+
+/* Written 1998-2000 by Werner Almesberger, EPFL ICA */
+
+
+#ifndef __NET_DSFIELD_H
+#define __NET_DSFIELD_H
+
+#include <linux/types.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <asm/byteorder.h>
+
+
+static inline __u8 ipv4_get_dsfield(const struct iphdr *iph)
+{
+	return iph->tos;
+}
+
+
+static inline __u8 ipv6_get_dsfield(const struct ipv6hdr *ipv6h)
+{
+	return ntohs(*(const __be16 *)ipv6h) >> 4;
+}
+
+
+static inline void ipv4_change_dsfield(struct iphdr *iph,__u8 mask,
+    __u8 value)
+{
+        __u32 check = ntohs((__force __be16)iph->check);
+	__u8 dsfield;
+
+	dsfield = (iph->tos & mask) | value;
+	check += iph->tos;
+	if ((check+1) >> 16) check = (check+1) & 0xffff;
+	check -= dsfield;
+	check += check >> 16; /* adjust carry */
+	iph->check = (__force __sum16)htons(check);
+	iph->tos = dsfield;
+}
+
+
+static inline void ipv6_change_dsfield(struct ipv6hdr *ipv6h,__u8 mask,
+    __u8 value)
+{
+        __u16 tmp;
+
+	tmp = ntohs(*(__be16 *) ipv6h);
+	tmp = (tmp & ((mask << 4) | 0xf00f)) | (value << 4);
+	*(__be16 *) ipv6h = htons(tmp);
+}
+
+
+#endif
diff --git a/include/net/dst.h b/include/net/dst.h
new file mode 100644
index 00000000..8197eadc
--- /dev/null
+++ b/include/net/dst.h
@@ -0,0 +1,473 @@
+/*
+ * net/dst.h	Protocol independent destination cache definitions.
+ *
+ * Authors:	Alexey Kuznetsov, <kuznet@ms2.inr.ac.ru>
+ *
+ */
+
+#ifndef _NET_DST_H
+#define _NET_DST_H
+
+#include <net/dst_ops.h>
+#include <linux/netdevice.h>
+#include <linux/rtnetlink.h>
+#include <linux/rcupdate.h>
+#include <linux/bug.h>
+#include <linux/jiffies.h>
+#include <net/neighbour.h>
+#include <asm/processor.h>
+
+#define DST_GC_MIN	(HZ/10)
+#define DST_GC_INC	(HZ/2)
+#define DST_GC_MAX	(120*HZ)
+
+/* Each dst_entry has reference count and sits in some parent list(s).
+ * When it is removed from parent list, it is "freed" (dst_free).
+ * After this it enters dead state (dst->obsolete > 0) and if its refcnt
+ * is zero, it can be destroyed immediately, otherwise it is added
+ * to gc list and garbage collector periodically checks the refcnt.
+ */
+
+struct sk_buff;
+
+struct dst_entry {
+	struct rcu_head		rcu_head;
+	struct dst_entry	*child;
+	struct net_device       *dev;
+	struct  dst_ops	        *ops;
+	unsigned long		_metrics;
+	union {
+		unsigned long           expires;
+		/* point to where the dst_entry copied from */
+		struct dst_entry        *from;
+	};
+	struct dst_entry	*path;
+	struct neighbour __rcu	*_neighbour;
+#ifdef CONFIG_XFRM
+	struct xfrm_state	*xfrm;
+#else
+	void			*__pad1;
+#endif
+	int			(*input)(struct sk_buff*);
+	int			(*output)(struct sk_buff*);
+
+	int			flags;
+#define DST_HOST		0x0001
+#define DST_NOXFRM		0x0002
+#define DST_NOPOLICY		0x0004
+#define DST_NOHASH		0x0008
+#define DST_NOCACHE		0x0010
+#define DST_NOCOUNT		0x0020
+#define DST_NOPEER		0x0040
+#define DST_FAKE_RTABLE		0x0080
+#define DST_XFRM_TUNNEL		0x0100
+
+	short			error;
+	short			obsolete;
+	unsigned short		header_len;	/* more space at head required */
+	unsigned short		trailer_len;	/* space to reserve at tail */
+#ifdef CONFIG_IP_ROUTE_CLASSID
+	__u32			tclassid;
+#else
+	__u32			__pad2;
+#endif
+
+	/*
+	 * Align __refcnt to a 64 bytes alignment
+	 * (L1_CACHE_SIZE would be too much)
+	 */
+#ifdef CONFIG_64BIT
+	long			__pad_to_align_refcnt[2];
+#endif
+	/*
+	 * __refcnt wants to be on a different cache line from
+	 * input/output/ops or performance tanks badly
+	 */
+	atomic_t		__refcnt;	/* client references	*/
+	int			__use;
+	unsigned long		lastuse;
+	union {
+		struct dst_entry	*next;
+		struct rtable __rcu	*rt_next;
+		struct rt6_info		*rt6_next;
+		struct dn_route __rcu	*dn_next;
+	};
+};
+
+static inline struct neighbour *dst_get_neighbour_noref(struct dst_entry *dst)
+{
+	return rcu_dereference(dst->_neighbour);
+}
+
+static inline struct neighbour *dst_get_neighbour_noref_raw(struct dst_entry *dst)
+{
+	return rcu_dereference_raw(dst->_neighbour);
+}
+
+static inline void dst_set_neighbour(struct dst_entry *dst, struct neighbour *neigh)
+{
+	rcu_assign_pointer(dst->_neighbour, neigh);
+}
+
+extern u32 *dst_cow_metrics_generic(struct dst_entry *dst, unsigned long old);
+extern const u32 dst_default_metrics[RTAX_MAX];
+
+#define DST_METRICS_READ_ONLY	0x1UL
+#define __DST_METRICS_PTR(Y)	\
+	((u32 *)((Y) & ~DST_METRICS_READ_ONLY))
+#define DST_METRICS_PTR(X)	__DST_METRICS_PTR((X)->_metrics)
+
+static inline bool dst_metrics_read_only(const struct dst_entry *dst)
+{
+	return dst->_metrics & DST_METRICS_READ_ONLY;
+}
+
+extern void __dst_destroy_metrics_generic(struct dst_entry *dst, unsigned long old);
+
+static inline void dst_destroy_metrics_generic(struct dst_entry *dst)
+{
+	unsigned long val = dst->_metrics;
+	if (!(val & DST_METRICS_READ_ONLY))
+		__dst_destroy_metrics_generic(dst, val);
+}
+
+static inline u32 *dst_metrics_write_ptr(struct dst_entry *dst)
+{
+	unsigned long p = dst->_metrics;
+
+	BUG_ON(!p);
+
+	if (p & DST_METRICS_READ_ONLY)
+		return dst->ops->cow_metrics(dst, p);
+	return __DST_METRICS_PTR(p);
+}
+
+/* This may only be invoked before the entry has reached global
+ * visibility.
+ */
+static inline void dst_init_metrics(struct dst_entry *dst,
+				    const u32 *src_metrics,
+				    bool read_only)
+{
+	dst->_metrics = ((unsigned long) src_metrics) |
+		(read_only ? DST_METRICS_READ_ONLY : 0);
+}
+
+static inline void dst_copy_metrics(struct dst_entry *dest, const struct dst_entry *src)
+{
+	u32 *dst_metrics = dst_metrics_write_ptr(dest);
+
+	if (dst_metrics) {
+		u32 *src_metrics = DST_METRICS_PTR(src);
+
+		memcpy(dst_metrics, src_metrics, RTAX_MAX * sizeof(u32));
+	}
+}
+
+static inline u32 *dst_metrics_ptr(struct dst_entry *dst)
+{
+	return DST_METRICS_PTR(dst);
+}
+
+static inline u32
+dst_metric_raw(const struct dst_entry *dst, const int metric)
+{
+	u32 *p = DST_METRICS_PTR(dst);
+
+	return p[metric-1];
+}
+
+static inline u32
+dst_metric(const struct dst_entry *dst, const int metric)
+{
+	WARN_ON_ONCE(metric == RTAX_HOPLIMIT ||
+		     metric == RTAX_ADVMSS ||
+		     metric == RTAX_MTU);
+	return dst_metric_raw(dst, metric);
+}
+
+static inline u32
+dst_metric_advmss(const struct dst_entry *dst)
+{
+	u32 advmss = dst_metric_raw(dst, RTAX_ADVMSS);
+
+	if (!advmss)
+		advmss = dst->ops->default_advmss(dst);
+
+	return advmss;
+}
+
+static inline void dst_metric_set(struct dst_entry *dst, int metric, u32 val)
+{
+	u32 *p = dst_metrics_write_ptr(dst);
+
+	if (p)
+		p[metric-1] = val;
+}
+
+static inline u32
+dst_feature(const struct dst_entry *dst, u32 feature)
+{
+	return dst_metric(dst, RTAX_FEATURES) & feature;
+}
+
+static inline u32 dst_mtu(const struct dst_entry *dst)
+{
+	return dst->ops->mtu(dst);
+}
+
+/* RTT metrics are stored in milliseconds for user ABI, but used as jiffies */
+static inline unsigned long dst_metric_rtt(const struct dst_entry *dst, int metric)
+{
+	return msecs_to_jiffies(dst_metric(dst, metric));
+}
+
+static inline void set_dst_metric_rtt(struct dst_entry *dst, int metric,
+				      unsigned long rtt)
+{
+	dst_metric_set(dst, metric, jiffies_to_msecs(rtt));
+}
+
+static inline u32
+dst_allfrag(const struct dst_entry *dst)
+{
+	int ret = dst_feature(dst,  RTAX_FEATURE_ALLFRAG);
+	return ret;
+}
+
+static inline int
+dst_metric_locked(const struct dst_entry *dst, int metric)
+{
+	return dst_metric(dst, RTAX_LOCK) & (1<<metric);
+}
+
+static inline void dst_hold(struct dst_entry * dst)
+{
+	/*
+	 * If your kernel compilation stops here, please check
+	 * __pad_to_align_refcnt declaration in struct dst_entry
+	 */
+	BUILD_BUG_ON(offsetof(struct dst_entry, __refcnt) & 63);
+	atomic_inc(&dst->__refcnt);
+}
+
+static inline void dst_use(struct dst_entry *dst, unsigned long time)
+{
+	dst_hold(dst);
+	dst->__use++;
+	dst->lastuse = time;
+}
+
+static inline void dst_use_noref(struct dst_entry *dst, unsigned long time)
+{
+	dst->__use++;
+	dst->lastuse = time;
+}
+
+static inline
+struct dst_entry * dst_clone(struct dst_entry * dst)
+{
+	if (dst)
+		atomic_inc(&dst->__refcnt);
+	return dst;
+}
+
+extern void dst_release(struct dst_entry *dst);
+
+static inline void refdst_drop(unsigned long refdst)
+{
+	if (!(refdst & SKB_DST_NOREF))
+		dst_release((struct dst_entry *)(refdst & SKB_DST_PTRMASK));
+}
+
+/**
+ * skb_dst_drop - drops skb dst
+ * @skb: buffer
+ *
+ * Drops dst reference count if a reference was taken.
+ */
+static inline void skb_dst_drop(struct sk_buff *skb)
+{
+	if (skb->_skb_refdst) {
+		refdst_drop(skb->_skb_refdst);
+		skb->_skb_refdst = 0UL;
+	}
+}
+
+static inline void skb_dst_copy(struct sk_buff *nskb, const struct sk_buff *oskb)
+{
+	nskb->_skb_refdst = oskb->_skb_refdst;
+	if (!(nskb->_skb_refdst & SKB_DST_NOREF))
+		dst_clone(skb_dst(nskb));
+}
+
+/**
+ * skb_dst_force - makes sure skb dst is refcounted
+ * @skb: buffer
+ *
+ * If dst is not yet refcounted, let's do it
+ */
+static inline void skb_dst_force(struct sk_buff *skb)
+{
+	if (skb_dst_is_noref(skb)) {
+		WARN_ON(!rcu_read_lock_held());
+		skb->_skb_refdst &= ~SKB_DST_NOREF;
+		dst_clone(skb_dst(skb));
+	}
+}
+
+
+/**
+ *	__skb_tunnel_rx - prepare skb for rx reinsert
+ *	@skb: buffer
+ *	@dev: tunnel device
+ *
+ *	After decapsulation, packet is going to re-enter (netif_rx()) our stack,
+ *	so make some cleanups. (no accounting done)
+ */
+static inline void __skb_tunnel_rx(struct sk_buff *skb, struct net_device *dev)
+{
+	skb->dev = dev;
+
+	/*
+	 * Clear rxhash so that we can recalulate the hash for the
+	 * encapsulated packet, unless we have already determine the hash
+	 * over the L4 4-tuple.
+	 */
+	if (!skb->l4_rxhash)
+		skb->rxhash = 0;
+	skb_set_queue_mapping(skb, 0);
+	skb_dst_drop(skb);
+	nf_reset(skb);
+}
+
+/**
+ *	skb_tunnel_rx - prepare skb for rx reinsert
+ *	@skb: buffer
+ *	@dev: tunnel device
+ *
+ *	After decapsulation, packet is going to re-enter (netif_rx()) our stack,
+ *	so make some cleanups, and perform accounting.
+ *	Note: this accounting is not SMP safe.
+ */
+static inline void skb_tunnel_rx(struct sk_buff *skb, struct net_device *dev)
+{
+	/* TODO : stats should be SMP safe */
+	dev->stats.rx_packets++;
+	dev->stats.rx_bytes += skb->len;
+	__skb_tunnel_rx(skb, dev);
+}
+
+/* Children define the path of the packet through the
+ * Linux networking.  Thus, destinations are stackable.
+ */
+
+static inline struct dst_entry *skb_dst_pop(struct sk_buff *skb)
+{
+	struct dst_entry *child = dst_clone(skb_dst(skb)->child);
+
+	skb_dst_drop(skb);
+	return child;
+}
+
+extern int dst_discard(struct sk_buff *skb);
+extern void *dst_alloc(struct dst_ops * ops, struct net_device *dev,
+		       int initial_ref, int initial_obsolete, int flags);
+extern void __dst_free(struct dst_entry * dst);
+extern struct dst_entry *dst_destroy(struct dst_entry * dst);
+
+static inline void dst_free(struct dst_entry * dst)
+{
+	if (dst->obsolete > 1)
+		return;
+	if (!atomic_read(&dst->__refcnt)) {
+		dst = dst_destroy(dst);
+		if (!dst)
+			return;
+	}
+	__dst_free(dst);
+}
+
+static inline void dst_rcu_free(struct rcu_head *head)
+{
+	struct dst_entry *dst = container_of(head, struct dst_entry, rcu_head);
+	dst_free(dst);
+}
+
+static inline void dst_confirm(struct dst_entry *dst)
+{
+	if (dst) {
+		struct neighbour *n;
+
+		rcu_read_lock();
+		n = dst_get_neighbour_noref(dst);
+		neigh_confirm(n);
+		rcu_read_unlock();
+	}
+}
+
+static inline struct neighbour *dst_neigh_lookup(const struct dst_entry *dst, const void *daddr)
+{
+	return dst->ops->neigh_lookup(dst, daddr);
+}
+
+static inline void dst_link_failure(struct sk_buff *skb)
+{
+	struct dst_entry *dst = skb_dst(skb);
+	if (dst && dst->ops && dst->ops->link_failure)
+		dst->ops->link_failure(skb);
+}
+
+static inline void dst_set_expires(struct dst_entry *dst, int timeout)
+{
+	unsigned long expires = jiffies + timeout;
+
+	if (expires == 0)
+		expires = 1;
+
+	if (dst->expires == 0 || time_before(expires, dst->expires))
+		dst->expires = expires;
+}
+
+/* Output packet to network from transport.  */
+static inline int dst_output(struct sk_buff *skb)
+{
+	return skb_dst(skb)->output(skb);
+}
+
+/* Input packet from network to transport.  */
+static inline int dst_input(struct sk_buff *skb)
+{
+	return skb_dst(skb)->input(skb);
+}
+
+static inline struct dst_entry *dst_check(struct dst_entry *dst, u32 cookie)
+{
+	if (dst->obsolete)
+		dst = dst->ops->check(dst, cookie);
+	return dst;
+}
+
+extern void		dst_init(void);
+
+/* Flags for xfrm_lookup flags argument. */
+enum {
+	XFRM_LOOKUP_ICMP = 1 << 0,
+};
+
+struct flowi;
+#ifndef CONFIG_XFRM
+static inline struct dst_entry *xfrm_lookup(struct net *net,
+					    struct dst_entry *dst_orig,
+					    const struct flowi *fl, struct sock *sk,
+					    int flags)
+{
+	return dst_orig;
+} 
+#else
+extern struct dst_entry *xfrm_lookup(struct net *net, struct dst_entry *dst_orig,
+				     const struct flowi *fl, struct sock *sk,
+				     int flags);
+#endif
+
+#endif /* _NET_DST_H */
diff --git a/include/net/dst_ops.h b/include/net/dst_ops.h
new file mode 100644
index 00000000..e1c2ee0e
--- /dev/null
+++ b/include/net/dst_ops.h
@@ -0,0 +1,68 @@
+#ifndef _NET_DST_OPS_H
+#define _NET_DST_OPS_H
+#include <linux/types.h>
+#include <linux/percpu_counter.h>
+#include <linux/cache.h>
+
+struct dst_entry;
+struct kmem_cachep;
+struct net_device;
+struct sk_buff;
+
+struct dst_ops {
+	unsigned short		family;
+	__be16			protocol;
+	unsigned		gc_thresh;
+
+	int			(*gc)(struct dst_ops *ops);
+	struct dst_entry *	(*check)(struct dst_entry *, __u32 cookie);
+	unsigned int		(*default_advmss)(const struct dst_entry *);
+	unsigned int		(*mtu)(const struct dst_entry *);
+	u32 *			(*cow_metrics)(struct dst_entry *, unsigned long);
+	void			(*destroy)(struct dst_entry *);
+	void			(*ifdown)(struct dst_entry *,
+					  struct net_device *dev, int how);
+	struct dst_entry *	(*negative_advice)(struct dst_entry *);
+	void			(*link_failure)(struct sk_buff *);
+	void			(*update_pmtu)(struct dst_entry *dst, u32 mtu);
+	int			(*local_out)(struct sk_buff *skb);
+	struct neighbour *	(*neigh_lookup)(const struct dst_entry *dst, const void *daddr);
+
+	struct kmem_cache	*kmem_cachep;
+
+	struct percpu_counter	pcpuc_entries ____cacheline_aligned_in_smp;
+};
+
+static inline int dst_entries_get_fast(struct dst_ops *dst)
+{
+	return percpu_counter_read_positive(&dst->pcpuc_entries);
+}
+
+static inline int dst_entries_get_slow(struct dst_ops *dst)
+{
+	int res;
+
+	local_bh_disable();
+	res = percpu_counter_sum_positive(&dst->pcpuc_entries);
+	local_bh_enable();
+	return res;
+}
+
+static inline void dst_entries_add(struct dst_ops *dst, int val)
+{
+	local_bh_disable();
+	percpu_counter_add(&dst->pcpuc_entries, val);
+	local_bh_enable();
+}
+
+static inline int dst_entries_init(struct dst_ops *dst)
+{
+	return percpu_counter_init(&dst->pcpuc_entries, 0);
+}
+
+static inline void dst_entries_destroy(struct dst_ops *dst)
+{
+	percpu_counter_destroy(&dst->pcpuc_entries);
+}
+
+#endif
diff --git a/include/net/esp.h b/include/net/esp.h
new file mode 100644
index 00000000..d5845133
--- /dev/null
+++ b/include/net/esp.h
@@ -0,0 +1,25 @@
+#ifndef _NET_ESP_H
+#define _NET_ESP_H
+
+#include <linux/skbuff.h>
+
+struct crypto_aead;
+
+struct esp_data {
+	/* 0..255 */
+	int padlen;
+
+	/* Confidentiality & Integrity */
+	struct crypto_aead *aead;
+};
+
+extern void *pskb_put(struct sk_buff *skb, struct sk_buff *tail, int len);
+
+struct ip_esp_hdr;
+
+static inline struct ip_esp_hdr *ip_esp_hdr(const struct sk_buff *skb)
+{
+	return (struct ip_esp_hdr *)skb_transport_header(skb);
+}
+
+#endif
diff --git a/include/net/ethoc.h b/include/net/ethoc.h
new file mode 100644
index 00000000..96f3789b
--- /dev/null
+++ b/include/net/ethoc.h
@@ -0,0 +1,22 @@
+/*
+ * linux/include/net/ethoc.h
+ *
+ * Copyright (C) 2008-2009 Avionic Design GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Written by Thierry Reding <thierry.reding@avionic-design.de>
+ */
+
+#ifndef LINUX_NET_ETHOC_H
+#define LINUX_NET_ETHOC_H 1
+
+struct ethoc_platform_data {
+	u8 hwaddr[IFHWADDRLEN];
+	s8 phy_id;
+};
+
+#endif /* !LINUX_NET_ETHOC_H */
+
diff --git a/include/net/fib_rules.h b/include/net/fib_rules.h
new file mode 100644
index 00000000..075f1e3a
--- /dev/null
+++ b/include/net/fib_rules.h
@@ -0,0 +1,119 @@
+#ifndef __NET_FIB_RULES_H
+#define __NET_FIB_RULES_H
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/netdevice.h>
+#include <linux/fib_rules.h>
+#include <net/flow.h>
+#include <net/rtnetlink.h>
+
+struct fib_rule {
+	struct list_head	list;
+	atomic_t		refcnt;
+	int			iifindex;
+	int			oifindex;
+	u32			mark;
+	u32			mark_mask;
+	u32			pref;
+	u32			flags;
+	u32			table;
+	u8			action;
+	u32			target;
+	struct fib_rule __rcu	*ctarget;
+	char			iifname[IFNAMSIZ];
+	char			oifname[IFNAMSIZ];
+	struct rcu_head		rcu;
+	struct net *		fr_net;
+};
+
+struct fib_lookup_arg {
+	void			*lookup_ptr;
+	void			*result;
+	struct fib_rule		*rule;
+	int			flags;
+#define FIB_LOOKUP_NOREF	1
+};
+
+struct fib_rules_ops {
+	int			family;
+	struct list_head	list;
+	int			rule_size;
+	int			addr_size;
+	int			unresolved_rules;
+	int			nr_goto_rules;
+
+	int			(*action)(struct fib_rule *,
+					  struct flowi *, int,
+					  struct fib_lookup_arg *);
+	int			(*match)(struct fib_rule *,
+					 struct flowi *, int);
+	int			(*configure)(struct fib_rule *,
+					     struct sk_buff *,
+					     struct fib_rule_hdr *,
+					     struct nlattr **);
+	int			(*compare)(struct fib_rule *,
+					   struct fib_rule_hdr *,
+					   struct nlattr **);
+	int			(*fill)(struct fib_rule *, struct sk_buff *,
+					struct fib_rule_hdr *);
+	u32			(*default_pref)(struct fib_rules_ops *ops);
+	size_t			(*nlmsg_payload)(struct fib_rule *);
+
+	/* Called after modifications to the rules set, must flush
+	 * the route cache if one exists. */
+	void			(*flush_cache)(struct fib_rules_ops *ops);
+
+	int			nlgroup;
+	const struct nla_policy	*policy;
+	struct list_head	rules_list;
+	struct module		*owner;
+	struct net		*fro_net;
+	struct rcu_head		rcu;
+};
+
+#define FRA_GENERIC_POLICY \
+	[FRA_IIFNAME]	= { .type = NLA_STRING, .len = IFNAMSIZ - 1 }, \
+	[FRA_OIFNAME]	= { .type = NLA_STRING, .len = IFNAMSIZ - 1 }, \
+	[FRA_PRIORITY]	= { .type = NLA_U32 }, \
+	[FRA_FWMARK]	= { .type = NLA_U32 }, \
+	[FRA_FWMASK]	= { .type = NLA_U32 }, \
+	[FRA_TABLE]     = { .type = NLA_U32 }, \
+	[FRA_GOTO]	= { .type = NLA_U32 }
+
+static inline void fib_rule_get(struct fib_rule *rule)
+{
+	atomic_inc(&rule->refcnt);
+}
+
+static inline void fib_rule_put_rcu(struct rcu_head *head)
+{
+	struct fib_rule *rule = container_of(head, struct fib_rule, rcu);
+	release_net(rule->fr_net);
+	kfree(rule);
+}
+
+static inline void fib_rule_put(struct fib_rule *rule)
+{
+	if (atomic_dec_and_test(&rule->refcnt))
+		call_rcu(&rule->rcu, fib_rule_put_rcu);
+}
+
+static inline u32 frh_get_table(struct fib_rule_hdr *frh, struct nlattr **nla)
+{
+	if (nla[FRA_TABLE])
+		return nla_get_u32(nla[FRA_TABLE]);
+	return frh->table;
+}
+
+extern struct fib_rules_ops *fib_rules_register(const struct fib_rules_ops *, struct net *);
+extern void fib_rules_unregister(struct fib_rules_ops *);
+
+extern int			fib_rules_lookup(struct fib_rules_ops *,
+						 struct flowi *, int flags,
+						 struct fib_lookup_arg *);
+extern int			fib_default_rule_add(struct fib_rules_ops *,
+						     u32 pref, u32 table,
+						     u32 flags);
+extern u32			fib_default_rule_pref(struct fib_rules_ops *ops);
+#endif
diff --git a/include/net/flow.h b/include/net/flow.h
new file mode 100644
index 00000000..6c469dbd
--- /dev/null
+++ b/include/net/flow.h
@@ -0,0 +1,226 @@
+/*
+ *
+ *	Generic internet FLOW.
+ *
+ */
+
+#ifndef _NET_FLOW_H
+#define _NET_FLOW_H
+
+#include <linux/socket.h>
+#include <linux/in6.h>
+#include <linux/atomic.h>
+
+struct flowi_common {
+	int	flowic_oif;
+	int	flowic_iif;
+	__u32	flowic_mark;
+	__u8	flowic_tos;
+	__u8	flowic_scope;
+	__u8	flowic_proto;
+	__u8	flowic_flags;
+#define FLOWI_FLAG_ANYSRC		0x01
+#define FLOWI_FLAG_PRECOW_METRICS	0x02
+#define FLOWI_FLAG_CAN_SLEEP		0x04
+	__u32	flowic_secid;
+};
+
+union flowi_uli {
+	struct {
+		__be16	dport;
+		__be16	sport;
+	} ports;
+
+	struct {
+		__u8	type;
+		__u8	code;
+	} icmpt;
+
+	struct {
+		__le16	dport;
+		__le16	sport;
+	} dnports;
+
+	__be32		spi;
+	__be32		gre_key;
+
+	struct {
+		__u8	type;
+	} mht;
+};
+
+struct flowi4 {
+	struct flowi_common	__fl_common;
+#define flowi4_oif		__fl_common.flowic_oif
+#define flowi4_iif		__fl_common.flowic_iif
+#define flowi4_mark		__fl_common.flowic_mark
+#define flowi4_tos		__fl_common.flowic_tos
+#define flowi4_scope		__fl_common.flowic_scope
+#define flowi4_proto		__fl_common.flowic_proto
+#define flowi4_flags		__fl_common.flowic_flags
+#define flowi4_secid		__fl_common.flowic_secid
+
+	/* (saddr,daddr) must be grouped, same order as in IP header */
+	__be32			saddr;
+	__be32			daddr;
+
+	union flowi_uli		uli;
+#define fl4_sport		uli.ports.sport
+#define fl4_dport		uli.ports.dport
+#define fl4_icmp_type		uli.icmpt.type
+#define fl4_icmp_code		uli.icmpt.code
+#define fl4_ipsec_spi		uli.spi
+#define fl4_mh_type		uli.mht.type
+#define fl4_gre_key		uli.gre_key
+} __attribute__((__aligned__(BITS_PER_LONG/8)));
+
+static inline void flowi4_init_output(struct flowi4 *fl4, int oif,
+				      __u32 mark, __u8 tos, __u8 scope,
+				      __u8 proto, __u8 flags,
+				      __be32 daddr, __be32 saddr,
+				      __be16 dport, __be16 sport)
+{
+	fl4->flowi4_oif = oif;
+	fl4->flowi4_iif = 0;
+	fl4->flowi4_mark = mark;
+	fl4->flowi4_tos = tos;
+	fl4->flowi4_scope = scope;
+	fl4->flowi4_proto = proto;
+	fl4->flowi4_flags = flags;
+	fl4->flowi4_secid = 0;
+	fl4->daddr = daddr;
+	fl4->saddr = saddr;
+	fl4->fl4_dport = dport;
+	fl4->fl4_sport = sport;
+}
+
+/* Reset some input parameters after previous lookup */
+static inline void flowi4_update_output(struct flowi4 *fl4, int oif, __u8 tos,
+					__be32 daddr, __be32 saddr)
+{
+	fl4->flowi4_oif = oif;
+	fl4->flowi4_tos = tos;
+	fl4->daddr = daddr;
+	fl4->saddr = saddr;
+}
+				      
+
+struct flowi6 {
+	struct flowi_common	__fl_common;
+#define flowi6_oif		__fl_common.flowic_oif
+#define flowi6_iif		__fl_common.flowic_iif
+#define flowi6_mark		__fl_common.flowic_mark
+#define flowi6_tos		__fl_common.flowic_tos
+#define flowi6_scope		__fl_common.flowic_scope
+#define flowi6_proto		__fl_common.flowic_proto
+#define flowi6_flags		__fl_common.flowic_flags
+#define flowi6_secid		__fl_common.flowic_secid
+	struct in6_addr		daddr;
+	struct in6_addr		saddr;
+	__be32			flowlabel;
+	union flowi_uli		uli;
+#define fl6_sport		uli.ports.sport
+#define fl6_dport		uli.ports.dport
+#define fl6_icmp_type		uli.icmpt.type
+#define fl6_icmp_code		uli.icmpt.code
+#define fl6_ipsec_spi		uli.spi
+#define fl6_mh_type		uli.mht.type
+#define fl6_gre_key		uli.gre_key
+} __attribute__((__aligned__(BITS_PER_LONG/8)));
+
+struct flowidn {
+	struct flowi_common	__fl_common;
+#define flowidn_oif		__fl_common.flowic_oif
+#define flowidn_iif		__fl_common.flowic_iif
+#define flowidn_mark		__fl_common.flowic_mark
+#define flowidn_scope		__fl_common.flowic_scope
+#define flowidn_proto		__fl_common.flowic_proto
+#define flowidn_flags		__fl_common.flowic_flags
+	__le16			daddr;
+	__le16			saddr;
+	union flowi_uli		uli;
+#define fld_sport		uli.ports.sport
+#define fld_dport		uli.ports.dport
+} __attribute__((__aligned__(BITS_PER_LONG/8)));
+
+struct flowi {
+	union {
+		struct flowi_common	__fl_common;
+		struct flowi4		ip4;
+		struct flowi6		ip6;
+		struct flowidn		dn;
+	} u;
+#define flowi_oif	u.__fl_common.flowic_oif
+#define flowi_iif	u.__fl_common.flowic_iif
+#define flowi_mark	u.__fl_common.flowic_mark
+#define flowi_tos	u.__fl_common.flowic_tos
+#define flowi_scope	u.__fl_common.flowic_scope
+#define flowi_proto	u.__fl_common.flowic_proto
+#define flowi_flags	u.__fl_common.flowic_flags
+#define flowi_secid	u.__fl_common.flowic_secid
+} __attribute__((__aligned__(BITS_PER_LONG/8)));
+
+static inline struct flowi *flowi4_to_flowi(struct flowi4 *fl4)
+{
+	return container_of(fl4, struct flowi, u.ip4);
+}
+
+static inline struct flowi *flowi6_to_flowi(struct flowi6 *fl6)
+{
+	return container_of(fl6, struct flowi, u.ip6);
+}
+
+static inline struct flowi *flowidn_to_flowi(struct flowidn *fldn)
+{
+	return container_of(fldn, struct flowi, u.dn);
+}
+
+typedef unsigned long flow_compare_t;
+
+static inline size_t flow_key_size(u16 family)
+{
+	switch (family) {
+	case AF_INET:
+		BUILD_BUG_ON(sizeof(struct flowi4) % sizeof(flow_compare_t));
+		return sizeof(struct flowi4) / sizeof(flow_compare_t);
+	case AF_INET6:
+		BUILD_BUG_ON(sizeof(struct flowi6) % sizeof(flow_compare_t));
+		return sizeof(struct flowi6) / sizeof(flow_compare_t);
+	case AF_DECnet:
+		BUILD_BUG_ON(sizeof(struct flowidn) % sizeof(flow_compare_t));
+		return sizeof(struct flowidn) / sizeof(flow_compare_t);
+	}
+	return 0;
+}
+
+#define FLOW_DIR_IN	0
+#define FLOW_DIR_OUT	1
+#define FLOW_DIR_FWD	2
+
+struct net;
+struct sock;
+struct flow_cache_ops;
+
+struct flow_cache_object {
+	const struct flow_cache_ops *ops;
+};
+
+struct flow_cache_ops {
+	struct flow_cache_object *(*get)(struct flow_cache_object *);
+	int (*check)(struct flow_cache_object *);
+	void (*delete)(struct flow_cache_object *);
+};
+
+typedef struct flow_cache_object *(*flow_resolve_t)(
+		struct net *net, const struct flowi *key, u16 family,
+		u8 dir, struct flow_cache_object *oldobj, void *ctx);
+
+extern struct flow_cache_object *flow_cache_lookup(
+		struct net *net, const struct flowi *key, u16 family,
+		u8 dir, flow_resolve_t resolver, void *ctx);
+
+extern void flow_cache_flush(void);
+extern void flow_cache_flush_deferred(void);
+extern atomic_t flow_cache_genid;
+
+#endif
diff --git a/include/net/flow_keys.h b/include/net/flow_keys.h
new file mode 100644
index 00000000..80461c1a
--- /dev/null
+++ b/include/net/flow_keys.h
@@ -0,0 +1,16 @@
+#ifndef _NET_FLOW_KEYS_H
+#define _NET_FLOW_KEYS_H
+
+struct flow_keys {
+	/* (src,dst) must be grouped, in the same way than in IP header */
+	__be32 src;
+	__be32 dst;
+	union {
+		__be32 ports;
+		__be16 port16[2];
+	};
+	u8 ip_proto;
+};
+
+extern bool skb_flow_dissect(const struct sk_buff *skb, struct flow_keys *flow);
+#endif
diff --git a/include/net/garp.h b/include/net/garp.h
new file mode 100644
index 00000000..834d8add
--- /dev/null
+++ b/include/net/garp.h
@@ -0,0 +1,130 @@
+#ifndef _NET_GARP_H
+#define _NET_GARP_H
+
+#include <net/stp.h>
+
+#define GARP_PROTOCOL_ID	0x1
+#define GARP_END_MARK		0x0
+
+struct garp_pdu_hdr {
+	__be16	protocol;
+};
+
+struct garp_msg_hdr {
+	u8	attrtype;
+};
+
+enum garp_attr_event {
+	GARP_LEAVE_ALL,
+	GARP_JOIN_EMPTY,
+	GARP_JOIN_IN,
+	GARP_LEAVE_EMPTY,
+	GARP_LEAVE_IN,
+	GARP_EMPTY,
+};
+
+struct garp_attr_hdr {
+	u8	len;
+	u8	event;
+	u8	data[];
+};
+
+struct garp_skb_cb {
+	u8	cur_type;
+};
+
+static inline struct garp_skb_cb *garp_cb(struct sk_buff *skb)
+{
+	BUILD_BUG_ON(sizeof(struct garp_skb_cb) >
+		     FIELD_SIZEOF(struct sk_buff, cb));
+	return (struct garp_skb_cb *)skb->cb;
+}
+
+enum garp_applicant_state {
+	GARP_APPLICANT_INVALID,
+	GARP_APPLICANT_VA,
+	GARP_APPLICANT_AA,
+	GARP_APPLICANT_QA,
+	GARP_APPLICANT_LA,
+	GARP_APPLICANT_VP,
+	GARP_APPLICANT_AP,
+	GARP_APPLICANT_QP,
+	GARP_APPLICANT_VO,
+	GARP_APPLICANT_AO,
+	GARP_APPLICANT_QO,
+	__GARP_APPLICANT_MAX
+};
+#define GARP_APPLICANT_MAX	(__GARP_APPLICANT_MAX - 1)
+
+enum garp_event {
+	GARP_EVENT_REQ_JOIN,
+	GARP_EVENT_REQ_LEAVE,
+	GARP_EVENT_R_JOIN_IN,
+	GARP_EVENT_R_JOIN_EMPTY,
+	GARP_EVENT_R_EMPTY,
+	GARP_EVENT_R_LEAVE_IN,
+	GARP_EVENT_R_LEAVE_EMPTY,
+	GARP_EVENT_TRANSMIT_PDU,
+	__GARP_EVENT_MAX
+};
+#define GARP_EVENT_MAX		(__GARP_EVENT_MAX - 1)
+
+enum garp_action {
+	GARP_ACTION_NONE,
+	GARP_ACTION_S_JOIN_IN,
+	GARP_ACTION_S_LEAVE_EMPTY,
+};
+
+struct garp_attr {
+	struct rb_node			node;
+	enum garp_applicant_state	state;
+	u8				type;
+	u8				dlen;
+	unsigned char			data[];
+};
+
+enum garp_applications {
+	GARP_APPLICATION_GVRP,
+	__GARP_APPLICATION_MAX
+};
+#define GARP_APPLICATION_MAX	(__GARP_APPLICATION_MAX - 1)
+
+struct garp_application {
+	enum garp_applications	type;
+	unsigned int		maxattr;
+	struct stp_proto	proto;
+};
+
+struct garp_applicant {
+	struct garp_application	*app;
+	struct net_device	*dev;
+	struct timer_list	join_timer;
+
+	spinlock_t		lock;
+	struct sk_buff_head	queue;
+	struct sk_buff		*pdu;
+	struct rb_root		gid;
+	struct rcu_head		rcu;
+};
+
+struct garp_port {
+	struct garp_applicant __rcu	*applicants[GARP_APPLICATION_MAX + 1];
+	struct rcu_head			rcu;
+};
+
+extern int	garp_register_application(struct garp_application *app);
+extern void	garp_unregister_application(struct garp_application *app);
+
+extern int	garp_init_applicant(struct net_device *dev,
+				    struct garp_application *app);
+extern void	garp_uninit_applicant(struct net_device *dev,
+				      struct garp_application *app);
+
+extern int	garp_request_join(const struct net_device *dev,
+				  const struct garp_application *app,
+				  const void *data, u8 len, u8 type);
+extern void	garp_request_leave(const struct net_device *dev,
+				   const struct garp_application *app,
+				   const void *data, u8 len, u8 type);
+
+#endif /* _NET_GARP_H */
diff --git a/include/net/gen_stats.h b/include/net/gen_stats.h
new file mode 100644
index 00000000..a79b6cfb
--- /dev/null
+++ b/include/net/gen_stats.h
@@ -0,0 +1,50 @@
+#ifndef __NET_GEN_STATS_H
+#define __NET_GEN_STATS_H
+
+#include <linux/gen_stats.h>
+#include <linux/socket.h>
+#include <linux/rtnetlink.h>
+#include <linux/pkt_sched.h>
+
+struct gnet_dump {
+	spinlock_t *      lock;
+	struct sk_buff *  skb;
+	struct nlattr *   tail;
+
+	/* Backward compatibility */
+	int               compat_tc_stats;
+	int               compat_xstats;
+	void *            xstats;
+	int               xstats_len;
+	struct tc_stats   tc_stats;
+};
+
+extern int gnet_stats_start_copy(struct sk_buff *skb, int type,
+				 spinlock_t *lock, struct gnet_dump *d);
+
+extern int gnet_stats_start_copy_compat(struct sk_buff *skb, int type,
+					int tc_stats_type,int xstats_type,
+					spinlock_t *lock, struct gnet_dump *d);
+
+extern int gnet_stats_copy_basic(struct gnet_dump *d,
+				 struct gnet_stats_basic_packed *b);
+extern int gnet_stats_copy_rate_est(struct gnet_dump *d,
+				    const struct gnet_stats_basic_packed *b,
+				    struct gnet_stats_rate_est *r);
+extern int gnet_stats_copy_queue(struct gnet_dump *d,
+				 struct gnet_stats_queue *q);
+extern int gnet_stats_copy_app(struct gnet_dump *d, void *st, int len);
+
+extern int gnet_stats_finish_copy(struct gnet_dump *d);
+
+extern int gen_new_estimator(struct gnet_stats_basic_packed *bstats,
+			     struct gnet_stats_rate_est *rate_est,
+			     spinlock_t *stats_lock, struct nlattr *opt);
+extern void gen_kill_estimator(struct gnet_stats_basic_packed *bstats,
+			       struct gnet_stats_rate_est *rate_est);
+extern int gen_replace_estimator(struct gnet_stats_basic_packed *bstats,
+				 struct gnet_stats_rate_est *rate_est,
+				 spinlock_t *stats_lock, struct nlattr *opt);
+extern bool gen_estimator_active(const struct gnet_stats_basic_packed *bstats,
+				 const struct gnet_stats_rate_est *rate_est);
+#endif
diff --git a/include/net/genetlink.h b/include/net/genetlink.h
new file mode 100644
index 00000000..ccb68880
--- /dev/null
+++ b/include/net/genetlink.h
@@ -0,0 +1,317 @@
+#ifndef __NET_GENERIC_NETLINK_H
+#define __NET_GENERIC_NETLINK_H
+
+#include <linux/genetlink.h>
+#include <net/netlink.h>
+#include <net/net_namespace.h>
+
+/**
+ * struct genl_multicast_group - generic netlink multicast group
+ * @name: name of the multicast group, names are per-family
+ * @id: multicast group ID, assigned by the core, to use with
+ *      genlmsg_multicast().
+ * @list: list entry for linking
+ * @family: pointer to family, need not be set before registering
+ */
+struct genl_multicast_group {
+	struct genl_family	*family;	/* private */
+	struct list_head	list;		/* private */
+	char			name[GENL_NAMSIZ];
+	u32			id;
+};
+
+struct genl_ops;
+struct genl_info;
+
+/**
+ * struct genl_family - generic netlink family
+ * @id: protocol family idenfitier
+ * @hdrsize: length of user specific header in bytes
+ * @name: name of family
+ * @version: protocol version
+ * @maxattr: maximum number of attributes supported
+ * @netnsok: set to true if the family can handle network
+ *	namespaces and should be presented in all of them
+ * @pre_doit: called before an operation's doit callback, it may
+ *	do additional, common, filtering and return an error
+ * @post_doit: called after an operation's doit callback, it may
+ *	undo operations done by pre_doit, for example release locks
+ * @attrbuf: buffer to store parsed attributes
+ * @ops_list: list of all assigned operations
+ * @family_list: family list
+ * @mcast_groups: multicast groups list
+ */
+struct genl_family {
+	unsigned int		id;
+	unsigned int		hdrsize;
+	char			name[GENL_NAMSIZ];
+	unsigned int		version;
+	unsigned int		maxattr;
+	bool			netnsok;
+	int			(*pre_doit)(struct genl_ops *ops,
+					    struct sk_buff *skb,
+					    struct genl_info *info);
+	void			(*post_doit)(struct genl_ops *ops,
+					     struct sk_buff *skb,
+					     struct genl_info *info);
+	struct nlattr **	attrbuf;	/* private */
+	struct list_head	ops_list;	/* private */
+	struct list_head	family_list;	/* private */
+	struct list_head	mcast_groups;	/* private */
+};
+
+/**
+ * struct genl_info - receiving information
+ * @snd_seq: sending sequence number
+ * @snd_pid: netlink pid of sender
+ * @nlhdr: netlink message header
+ * @genlhdr: generic netlink message header
+ * @userhdr: user specific header
+ * @attrs: netlink attributes
+ * @_net: network namespace
+ * @user_ptr: user pointers
+ */
+struct genl_info {
+	u32			snd_seq;
+	u32			snd_pid;
+	struct nlmsghdr *	nlhdr;
+	struct genlmsghdr *	genlhdr;
+	void *			userhdr;
+	struct nlattr **	attrs;
+#ifdef CONFIG_NET_NS
+	struct net *		_net;
+#endif
+	void *			user_ptr[2];
+};
+
+static inline struct net *genl_info_net(struct genl_info *info)
+{
+	return read_pnet(&info->_net);
+}
+
+static inline void genl_info_net_set(struct genl_info *info, struct net *net)
+{
+	write_pnet(&info->_net, net);
+}
+
+/**
+ * struct genl_ops - generic netlink operations
+ * @cmd: command identifier
+ * @internal_flags: flags used by the family
+ * @flags: flags
+ * @policy: attribute validation policy
+ * @doit: standard command callback
+ * @dumpit: callback for dumpers
+ * @done: completion callback for dumps
+ * @ops_list: operations list
+ */
+struct genl_ops {
+	u8			cmd;
+	u8			internal_flags;
+	unsigned int		flags;
+	const struct nla_policy	*policy;
+	int		       (*doit)(struct sk_buff *skb,
+				       struct genl_info *info);
+	int		       (*dumpit)(struct sk_buff *skb,
+					 struct netlink_callback *cb);
+	int		       (*done)(struct netlink_callback *cb);
+	struct list_head	ops_list;
+};
+
+extern int genl_register_family(struct genl_family *family);
+extern int genl_register_family_with_ops(struct genl_family *family,
+	struct genl_ops *ops, size_t n_ops);
+extern int genl_unregister_family(struct genl_family *family);
+extern int genl_register_ops(struct genl_family *, struct genl_ops *ops);
+extern int genl_unregister_ops(struct genl_family *, struct genl_ops *ops);
+extern int genl_register_mc_group(struct genl_family *family,
+				  struct genl_multicast_group *grp);
+extern void genl_unregister_mc_group(struct genl_family *family,
+				     struct genl_multicast_group *grp);
+extern void genl_notify(struct sk_buff *skb, struct net *net, u32 pid,
+			u32 group, struct nlmsghdr *nlh, gfp_t flags);
+
+void *genlmsg_put(struct sk_buff *skb, u32 pid, u32 seq,
+				struct genl_family *family, int flags, u8 cmd);
+
+/**
+ * genlmsg_nlhdr - Obtain netlink header from user specified header
+ * @user_hdr: user header as returned from genlmsg_put()
+ * @family: generic netlink family
+ *
+ * Returns pointer to netlink header.
+ */
+static inline struct nlmsghdr *genlmsg_nlhdr(void *user_hdr,
+					     struct genl_family *family)
+{
+	return (struct nlmsghdr *)((char *)user_hdr -
+				   family->hdrsize -
+				   GENL_HDRLEN -
+				   NLMSG_HDRLEN);
+}
+
+/**
+ * genl_dump_check_consistent - check if sequence is consistent and advertise if not
+ * @cb: netlink callback structure that stores the sequence number
+ * @user_hdr: user header as returned from genlmsg_put()
+ * @family: generic netlink family
+ *
+ * Cf. nl_dump_check_consistent(), this just provides a wrapper to make it
+ * simpler to use with generic netlink.
+ */
+static inline void genl_dump_check_consistent(struct netlink_callback *cb,
+					      void *user_hdr,
+					      struct genl_family *family)
+{
+	nl_dump_check_consistent(cb, genlmsg_nlhdr(user_hdr, family));
+}
+
+/**
+ * genlmsg_put_reply - Add generic netlink header to a reply message
+ * @skb: socket buffer holding the message
+ * @info: receiver info
+ * @family: generic netlink family
+ * @flags: netlink message flags
+ * @cmd: generic netlink command
+ *
+ * Returns pointer to user specific header
+ */
+static inline void *genlmsg_put_reply(struct sk_buff *skb,
+				      struct genl_info *info,
+				      struct genl_family *family,
+				      int flags, u8 cmd)
+{
+	return genlmsg_put(skb, info->snd_pid, info->snd_seq, family,
+			   flags, cmd);
+}
+
+/**
+ * genlmsg_end - Finalize a generic netlink message
+ * @skb: socket buffer the message is stored in
+ * @hdr: user specific header
+ */
+static inline int genlmsg_end(struct sk_buff *skb, void *hdr)
+{
+	return nlmsg_end(skb, hdr - GENL_HDRLEN - NLMSG_HDRLEN);
+}
+
+/**
+ * genlmsg_cancel - Cancel construction of a generic netlink message
+ * @skb: socket buffer the message is stored in
+ * @hdr: generic netlink message header
+ */
+static inline void genlmsg_cancel(struct sk_buff *skb, void *hdr)
+{
+	if (hdr)
+		nlmsg_cancel(skb, hdr - GENL_HDRLEN - NLMSG_HDRLEN);
+}
+
+/**
+ * genlmsg_multicast_netns - multicast a netlink message to a specific netns
+ * @net: the net namespace
+ * @skb: netlink message as socket buffer
+ * @pid: own netlink pid to avoid sending to yourself
+ * @group: multicast group id
+ * @flags: allocation flags
+ */
+static inline int genlmsg_multicast_netns(struct net *net, struct sk_buff *skb,
+					  u32 pid, unsigned int group, gfp_t flags)
+{
+	return nlmsg_multicast(net->genl_sock, skb, pid, group, flags);
+}
+
+/**
+ * genlmsg_multicast - multicast a netlink message to the default netns
+ * @skb: netlink message as socket buffer
+ * @pid: own netlink pid to avoid sending to yourself
+ * @group: multicast group id
+ * @flags: allocation flags
+ */
+static inline int genlmsg_multicast(struct sk_buff *skb, u32 pid,
+				    unsigned int group, gfp_t flags)
+{
+	return genlmsg_multicast_netns(&init_net, skb, pid, group, flags);
+}
+
+/**
+ * genlmsg_multicast_allns - multicast a netlink message to all net namespaces
+ * @skb: netlink message as socket buffer
+ * @pid: own netlink pid to avoid sending to yourself
+ * @group: multicast group id
+ * @flags: allocation flags
+ *
+ * This function must hold the RTNL or rcu_read_lock().
+ */
+int genlmsg_multicast_allns(struct sk_buff *skb, u32 pid,
+			    unsigned int group, gfp_t flags);
+
+/**
+ * genlmsg_unicast - unicast a netlink message
+ * @skb: netlink message as socket buffer
+ * @pid: netlink pid of the destination socket
+ */
+static inline int genlmsg_unicast(struct net *net, struct sk_buff *skb, u32 pid)
+{
+	return nlmsg_unicast(net->genl_sock, skb, pid);
+}
+
+/**
+ * genlmsg_reply - reply to a request
+ * @skb: netlink message to be sent back
+ * @info: receiver information
+ */
+static inline int genlmsg_reply(struct sk_buff *skb, struct genl_info *info)
+{
+	return genlmsg_unicast(genl_info_net(info), skb, info->snd_pid);
+}
+
+/**
+ * gennlmsg_data - head of message payload
+ * @gnlh: genetlink message header
+ */
+static inline void *genlmsg_data(const struct genlmsghdr *gnlh)
+{
+	return ((unsigned char *) gnlh + GENL_HDRLEN);
+}
+
+/**
+ * genlmsg_len - length of message payload
+ * @gnlh: genetlink message header
+ */
+static inline int genlmsg_len(const struct genlmsghdr *gnlh)
+{
+	struct nlmsghdr *nlh = (struct nlmsghdr *)((unsigned char *)gnlh -
+							NLMSG_HDRLEN);
+	return (nlh->nlmsg_len - GENL_HDRLEN - NLMSG_HDRLEN);
+}
+
+/**
+ * genlmsg_msg_size - length of genetlink message not including padding
+ * @payload: length of message payload
+ */
+static inline int genlmsg_msg_size(int payload)
+{
+	return GENL_HDRLEN + payload;
+}
+
+/**
+ * genlmsg_total_size - length of genetlink message including padding
+ * @payload: length of message payload
+ */
+static inline int genlmsg_total_size(int payload)
+{
+	return NLMSG_ALIGN(genlmsg_msg_size(payload));
+}
+
+/**
+ * genlmsg_new - Allocate a new generic netlink message
+ * @payload: size of the message payload
+ * @flags: the type of memory to allocate.
+ */
+static inline struct sk_buff *genlmsg_new(size_t payload, gfp_t flags)
+{
+	return nlmsg_new(genlmsg_total_size(payload), flags);
+}
+
+
+#endif	/* __NET_GENERIC_NETLINK_H */
diff --git a/include/net/gre.h b/include/net/gre.h
new file mode 100644
index 00000000..82665474
--- /dev/null
+++ b/include/net/gre.h
@@ -0,0 +1,18 @@
+#ifndef __LINUX_GRE_H
+#define __LINUX_GRE_H
+
+#include <linux/skbuff.h>
+
+#define GREPROTO_CISCO		0
+#define GREPROTO_PPTP		1
+#define GREPROTO_MAX		2
+
+struct gre_protocol {
+	int  (*handler)(struct sk_buff *skb);
+	void (*err_handler)(struct sk_buff *skb, u32 info);
+};
+
+int gre_add_protocol(const struct gre_protocol *proto, u8 version);
+int gre_del_protocol(const struct gre_protocol *proto, u8 version);
+
+#endif
diff --git a/include/net/icmp.h b/include/net/icmp.h
new file mode 100644
index 00000000..75d61564
--- /dev/null
+++ b/include/net/icmp.h
@@ -0,0 +1,48 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the ICMP module.
+ *
+ * Version:	@(#)icmp.h	1.0.4	05/13/93
+ *
+ * Authors:	Ross Biro
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _ICMP_H
+#define	_ICMP_H
+
+#include <linux/icmp.h>
+
+#include <net/inet_sock.h>
+#include <net/snmp.h>
+
+struct icmp_err {
+  int		errno;
+  unsigned	fatal:1;
+};
+
+extern const struct icmp_err icmp_err_convert[];
+#define ICMP_INC_STATS(net, field)	SNMP_INC_STATS((net)->mib.icmp_statistics, field)
+#define ICMP_INC_STATS_BH(net, field)	SNMP_INC_STATS_BH((net)->mib.icmp_statistics, field)
+#define ICMPMSGOUT_INC_STATS(net, field)	SNMP_INC_STATS_ATOMIC_LONG((net)->mib.icmpmsg_statistics, field+256)
+#define ICMPMSGIN_INC_STATS_BH(net, field)	SNMP_INC_STATS_ATOMIC_LONG((net)->mib.icmpmsg_statistics, field)
+
+struct dst_entry;
+struct net_proto_family;
+struct sk_buff;
+struct net;
+
+extern void	icmp_send(struct sk_buff *skb_in,  int type, int code, __be32 info);
+extern int	icmp_rcv(struct sk_buff *skb);
+extern int	icmp_ioctl(struct sock *sk, int cmd, unsigned long arg);
+extern int	icmp_init(void);
+extern void	icmp_out_count(struct net *net, unsigned char type);
+
+#endif	/* _ICMP_H */
diff --git a/include/net/ieee80211_radiotap.h b/include/net/ieee80211_radiotap.h
new file mode 100644
index 00000000..71392545
--- /dev/null
+++ b/include/net/ieee80211_radiotap.h
@@ -0,0 +1,283 @@
+/*
+ * Copyright (c) 2003, 2004 David Young.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The name of David Young may not be used to endorse or promote
+ *    products derived from this software without specific prior
+ *    written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY DAVID YOUNG ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL DAVID
+ * YOUNG BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+ * OF SUCH DAMAGE.
+ */
+
+/*
+ * Modifications to fit into the linux IEEE 802.11 stack,
+ * Mike Kershaw (dragorn@kismetwireless.net)
+ */
+
+#ifndef IEEE80211RADIOTAP_H
+#define IEEE80211RADIOTAP_H
+
+#include <linux/if_ether.h>
+#include <linux/kernel.h>
+#include <asm/unaligned.h>
+
+/* Base version of the radiotap packet header data */
+#define PKTHDR_RADIOTAP_VERSION		0
+
+/* A generic radio capture format is desirable. There is one for
+ * Linux, but it is neither rigidly defined (there were not even
+ * units given for some fields) nor easily extensible.
+ *
+ * I suggest the following extensible radio capture format. It is
+ * based on a bitmap indicating which fields are present.
+ *
+ * I am trying to describe precisely what the application programmer
+ * should expect in the following, and for that reason I tell the
+ * units and origin of each measurement (where it applies), or else I
+ * use sufficiently weaselly language ("is a monotonically nondecreasing
+ * function of...") that I cannot set false expectations for lawyerly
+ * readers.
+ */
+
+/*
+ * The radio capture header precedes the 802.11 header.
+ * All data in the header is little endian on all platforms.
+ */
+struct ieee80211_radiotap_header {
+	u8 it_version;		/* Version 0. Only increases
+				 * for drastic changes,
+				 * introduction of compatible
+				 * new fields does not count.
+				 */
+	u8 it_pad;
+	__le16 it_len;		/* length of the whole
+				 * header in bytes, including
+				 * it_version, it_pad,
+				 * it_len, and data fields.
+				 */
+	__le32 it_present;	/* A bitmap telling which
+				 * fields are present. Set bit 31
+				 * (0x80000000) to extend the
+				 * bitmap by another 32 bits.
+				 * Additional extensions are made
+				 * by setting bit 31.
+				 */
+} __packed;
+
+/* Name                                 Data type    Units
+ * ----                                 ---------    -----
+ *
+ * IEEE80211_RADIOTAP_TSFT              __le64       microseconds
+ *
+ *      Value in microseconds of the MAC's 64-bit 802.11 Time
+ *      Synchronization Function timer when the first bit of the
+ *      MPDU arrived at the MAC. For received frames, only.
+ *
+ * IEEE80211_RADIOTAP_CHANNEL           2 x __le16   MHz, bitmap
+ *
+ *      Tx/Rx frequency in MHz, followed by flags (see below).
+ *
+ * IEEE80211_RADIOTAP_FHSS              __le16       see below
+ *
+ *      For frequency-hopping radios, the hop set (first byte)
+ *      and pattern (second byte).
+ *
+ * IEEE80211_RADIOTAP_RATE              u8           500kb/s
+ *
+ *      Tx/Rx data rate
+ *
+ * IEEE80211_RADIOTAP_DBM_ANTSIGNAL     s8           decibels from
+ *                                                   one milliwatt (dBm)
+ *
+ *      RF signal power at the antenna, decibel difference from
+ *      one milliwatt.
+ *
+ * IEEE80211_RADIOTAP_DBM_ANTNOISE      s8           decibels from
+ *                                                   one milliwatt (dBm)
+ *
+ *      RF noise power at the antenna, decibel difference from one
+ *      milliwatt.
+ *
+ * IEEE80211_RADIOTAP_DB_ANTSIGNAL      u8           decibel (dB)
+ *
+ *      RF signal power at the antenna, decibel difference from an
+ *      arbitrary, fixed reference.
+ *
+ * IEEE80211_RADIOTAP_DB_ANTNOISE       u8           decibel (dB)
+ *
+ *      RF noise power at the antenna, decibel difference from an
+ *      arbitrary, fixed reference point.
+ *
+ * IEEE80211_RADIOTAP_LOCK_QUALITY      __le16       unitless
+ *
+ *      Quality of Barker code lock. Unitless. Monotonically
+ *      nondecreasing with "better" lock strength. Called "Signal
+ *      Quality" in datasheets.  (Is there a standard way to measure
+ *      this?)
+ *
+ * IEEE80211_RADIOTAP_TX_ATTENUATION    __le16       unitless
+ *
+ *      Transmit power expressed as unitless distance from max
+ *      power set at factory calibration.  0 is max power.
+ *      Monotonically nondecreasing with lower power levels.
+ *
+ * IEEE80211_RADIOTAP_DB_TX_ATTENUATION __le16       decibels (dB)
+ *
+ *      Transmit power expressed as decibel distance from max power
+ *      set at factory calibration.  0 is max power.  Monotonically
+ *      nondecreasing with lower power levels.
+ *
+ * IEEE80211_RADIOTAP_DBM_TX_POWER      s8           decibels from
+ *                                                   one milliwatt (dBm)
+ *
+ *      Transmit power expressed as dBm (decibels from a 1 milliwatt
+ *      reference). This is the absolute power level measured at
+ *      the antenna port.
+ *
+ * IEEE80211_RADIOTAP_FLAGS             u8           bitmap
+ *
+ *      Properties of transmitted and received frames. See flags
+ *      defined below.
+ *
+ * IEEE80211_RADIOTAP_ANTENNA           u8           antenna index
+ *
+ *      Unitless indication of the Rx/Tx antenna for this packet.
+ *      The first antenna is antenna 0.
+ *
+ * IEEE80211_RADIOTAP_RX_FLAGS          __le16       bitmap
+ *
+ *     Properties of received frames. See flags defined below.
+ *
+ * IEEE80211_RADIOTAP_TX_FLAGS          __le16       bitmap
+ *
+ *     Properties of transmitted frames. See flags defined below.
+ *
+ * IEEE80211_RADIOTAP_RTS_RETRIES       u8           data
+ *
+ *     Number of rts retries a transmitted frame used.
+ *
+ * IEEE80211_RADIOTAP_DATA_RETRIES      u8           data
+ *
+ *     Number of unicast retries a transmitted frame used.
+ *
+ * IEEE80211_RADIOTAP_MCS	u8, u8, u8		unitless
+ *
+ *     Contains a bitmap of known fields/flags, the flags, and
+ *     the MCS index.
+ *
+ */
+enum ieee80211_radiotap_type {
+	IEEE80211_RADIOTAP_TSFT = 0,
+	IEEE80211_RADIOTAP_FLAGS = 1,
+	IEEE80211_RADIOTAP_RATE = 2,
+	IEEE80211_RADIOTAP_CHANNEL = 3,
+	IEEE80211_RADIOTAP_FHSS = 4,
+	IEEE80211_RADIOTAP_DBM_ANTSIGNAL = 5,
+	IEEE80211_RADIOTAP_DBM_ANTNOISE = 6,
+	IEEE80211_RADIOTAP_LOCK_QUALITY = 7,
+	IEEE80211_RADIOTAP_TX_ATTENUATION = 8,
+	IEEE80211_RADIOTAP_DB_TX_ATTENUATION = 9,
+	IEEE80211_RADIOTAP_DBM_TX_POWER = 10,
+	IEEE80211_RADIOTAP_ANTENNA = 11,
+	IEEE80211_RADIOTAP_DB_ANTSIGNAL = 12,
+	IEEE80211_RADIOTAP_DB_ANTNOISE = 13,
+	IEEE80211_RADIOTAP_RX_FLAGS = 14,
+	IEEE80211_RADIOTAP_TX_FLAGS = 15,
+	IEEE80211_RADIOTAP_RTS_RETRIES = 16,
+	IEEE80211_RADIOTAP_DATA_RETRIES = 17,
+
+	IEEE80211_RADIOTAP_MCS = 19,
+
+	/* valid in every it_present bitmap, even vendor namespaces */
+	IEEE80211_RADIOTAP_RADIOTAP_NAMESPACE = 29,
+	IEEE80211_RADIOTAP_VENDOR_NAMESPACE = 30,
+	IEEE80211_RADIOTAP_EXT = 31
+};
+
+/* Channel flags. */
+#define	IEEE80211_CHAN_TURBO	0x0010	/* Turbo channel */
+#define	IEEE80211_CHAN_CCK	0x0020	/* CCK channel */
+#define	IEEE80211_CHAN_OFDM	0x0040	/* OFDM channel */
+#define	IEEE80211_CHAN_2GHZ	0x0080	/* 2 GHz spectrum channel. */
+#define	IEEE80211_CHAN_5GHZ	0x0100	/* 5 GHz spectrum channel */
+#define	IEEE80211_CHAN_PASSIVE	0x0200	/* Only passive scan allowed */
+#define	IEEE80211_CHAN_DYN	0x0400	/* Dynamic CCK-OFDM channel */
+#define	IEEE80211_CHAN_GFSK	0x0800	/* GFSK channel (FHSS PHY) */
+
+/* For IEEE80211_RADIOTAP_FLAGS */
+#define	IEEE80211_RADIOTAP_F_CFP	0x01	/* sent/received
+						 * during CFP
+						 */
+#define	IEEE80211_RADIOTAP_F_SHORTPRE	0x02	/* sent/received
+						 * with short
+						 * preamble
+						 */
+#define	IEEE80211_RADIOTAP_F_WEP	0x04	/* sent/received
+						 * with WEP encryption
+						 */
+#define	IEEE80211_RADIOTAP_F_FRAG	0x08	/* sent/received
+						 * with fragmentation
+						 */
+#define	IEEE80211_RADIOTAP_F_FCS	0x10	/* frame includes FCS */
+#define	IEEE80211_RADIOTAP_F_DATAPAD	0x20	/* frame has padding between
+						 * 802.11 header and payload
+						 * (to 32-bit boundary)
+						 */
+#define IEEE80211_RADIOTAP_F_BADFCS	0x40	/* bad FCS */
+
+/* For IEEE80211_RADIOTAP_RX_FLAGS */
+#define IEEE80211_RADIOTAP_F_RX_BADPLCP	0x0002	/* frame has bad PLCP */
+
+/* For IEEE80211_RADIOTAP_TX_FLAGS */
+#define IEEE80211_RADIOTAP_F_TX_FAIL	0x0001	/* failed due to excessive
+						 * retries */
+#define IEEE80211_RADIOTAP_F_TX_CTS	0x0002	/* used cts 'protection' */
+#define IEEE80211_RADIOTAP_F_TX_RTS	0x0004	/* used rts/cts handshake */
+#define IEEE80211_RADIOTAP_F_TX_NOACK	0x0008	/* don't expect an ack */
+
+
+/* For IEEE80211_RADIOTAP_MCS */
+#define IEEE80211_RADIOTAP_MCS_HAVE_BW		0x01
+#define IEEE80211_RADIOTAP_MCS_HAVE_MCS		0x02
+#define IEEE80211_RADIOTAP_MCS_HAVE_GI		0x04
+#define IEEE80211_RADIOTAP_MCS_HAVE_FMT		0x08
+#define IEEE80211_RADIOTAP_MCS_HAVE_FEC		0x10
+
+#define IEEE80211_RADIOTAP_MCS_BW_MASK		0x03
+#define		IEEE80211_RADIOTAP_MCS_BW_20	0
+#define		IEEE80211_RADIOTAP_MCS_BW_40	1
+#define		IEEE80211_RADIOTAP_MCS_BW_20L	2
+#define		IEEE80211_RADIOTAP_MCS_BW_20U	3
+#define IEEE80211_RADIOTAP_MCS_SGI		0x04
+#define IEEE80211_RADIOTAP_MCS_FMT_GF		0x08
+#define IEEE80211_RADIOTAP_MCS_FEC_LDPC		0x10
+
+
+/* helpers */
+static inline int ieee80211_get_radiotap_len(unsigned char *data)
+{
+	struct ieee80211_radiotap_header *hdr =
+		(struct ieee80211_radiotap_header *)data;
+
+	return get_unaligned_le16(&hdr->it_len);
+}
+
+#endif				/* IEEE80211_RADIOTAP_H */
diff --git a/include/net/ieee802154.h b/include/net/ieee802154.h
new file mode 100644
index 00000000..ee59f8b1
--- /dev/null
+++ b/include/net/ieee802154.h
@@ -0,0 +1,166 @@
+/*
+ * IEEE802.15.4-2003 specification
+ *
+ * Copyright (C) 2007, 2008 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Pavel Smolenskiy <pavel.smolenskiy@gmail.com>
+ * Maxim Gorbachyov <maxim.gorbachev@siemens.com>
+ * Maxim Osipov <maxim.osipov@siemens.com>
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ * Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
+ */
+
+#ifndef NET_IEEE802154_H
+#define NET_IEEE802154_H
+
+#define IEEE802154_MTU			127
+
+#define IEEE802154_FC_TYPE_BEACON	0x0	/* Frame is beacon */
+#define	IEEE802154_FC_TYPE_DATA		0x1	/* Frame is data */
+#define IEEE802154_FC_TYPE_ACK		0x2	/* Frame is acknowledgment */
+#define IEEE802154_FC_TYPE_MAC_CMD	0x3	/* Frame is MAC command */
+
+#define IEEE802154_FC_TYPE_SHIFT		0
+#define IEEE802154_FC_TYPE_MASK		((1 << 3) - 1)
+#define IEEE802154_FC_TYPE(x)		((x & IEEE802154_FC_TYPE_MASK) >> IEEE802154_FC_TYPE_SHIFT)
+#define IEEE802154_FC_SET_TYPE(v, x)	do {	\
+	v = (((v) & ~IEEE802154_FC_TYPE_MASK) | \
+	    (((x) << IEEE802154_FC_TYPE_SHIFT) & IEEE802154_FC_TYPE_MASK)); \
+	} while (0)
+
+#define IEEE802154_FC_SECEN		(1 << 3)
+#define IEEE802154_FC_FRPEND		(1 << 4)
+#define IEEE802154_FC_ACK_REQ		(1 << 5)
+#define IEEE802154_FC_INTRA_PAN		(1 << 6)
+
+#define IEEE802154_FC_SAMODE_SHIFT	14
+#define IEEE802154_FC_SAMODE_MASK	(3 << IEEE802154_FC_SAMODE_SHIFT)
+#define IEEE802154_FC_DAMODE_SHIFT	10
+#define IEEE802154_FC_DAMODE_MASK	(3 << IEEE802154_FC_DAMODE_SHIFT)
+
+#define IEEE802154_FC_SAMODE(x)		\
+	(((x) & IEEE802154_FC_SAMODE_MASK) >> IEEE802154_FC_SAMODE_SHIFT)
+
+#define IEEE802154_FC_DAMODE(x)		\
+	(((x) & IEEE802154_FC_DAMODE_MASK) >> IEEE802154_FC_DAMODE_SHIFT)
+
+
+/* MAC footer size */
+#define IEEE802154_MFR_SIZE	2 /* 2 octets */
+
+/* MAC's Command Frames Identifiers */
+#define IEEE802154_CMD_ASSOCIATION_REQ		0x01
+#define IEEE802154_CMD_ASSOCIATION_RESP		0x02
+#define IEEE802154_CMD_DISASSOCIATION_NOTIFY	0x03
+#define IEEE802154_CMD_DATA_REQ			0x04
+#define IEEE802154_CMD_PANID_CONFLICT_NOTIFY	0x05
+#define IEEE802154_CMD_ORPHAN_NOTIFY		0x06
+#define IEEE802154_CMD_BEACON_REQ		0x07
+#define IEEE802154_CMD_COORD_REALIGN_NOTIFY	0x08
+#define IEEE802154_CMD_GTS_REQ			0x09
+
+/*
+ * The return values of MAC operations
+ */
+enum {
+	/*
+	 * The requested operation was completed successfully.
+	 * For a transmission request, this value indicates
+	 * a successful transmission.
+	 */
+	IEEE802154_SUCCESS = 0x0,
+
+	/* The beacon was lost following a synchronization request. */
+	IEEE802154_BEACON_LOSS = 0xe0,
+	/*
+	 * A transmission could not take place due to activity on the
+	 * channel, i.e., the CSMA-CA mechanism has failed.
+	 */
+	IEEE802154_CHNL_ACCESS_FAIL = 0xe1,
+	/* The GTS request has been denied by the PAN coordinator. */
+	IEEE802154_DENINED = 0xe2,
+	/* The attempt to disable the transceiver has failed. */
+	IEEE802154_DISABLE_TRX_FAIL = 0xe3,
+	/*
+	 * The received frame induces a failed security check according to
+	 * the security suite.
+	 */
+	IEEE802154_FAILED_SECURITY_CHECK = 0xe4,
+	/*
+	 * The frame resulting from secure processing has a length that is
+	 * greater than aMACMaxFrameSize.
+	 */
+	IEEE802154_FRAME_TOO_LONG = 0xe5,
+	/*
+	 * The requested GTS transmission failed because the specified GTS
+	 * either did not have a transmit GTS direction or was not defined.
+	 */
+	IEEE802154_INVALID_GTS = 0xe6,
+	/*
+	 * A request to purge an MSDU from the transaction queue was made using
+	 * an MSDU handle that was not found in the transaction table.
+	 */
+	IEEE802154_INVALID_HANDLE = 0xe7,
+	/* A parameter in the primitive is out of the valid range.*/
+	IEEE802154_INVALID_PARAMETER = 0xe8,
+	/* No acknowledgment was received after aMaxFrameRetries. */
+	IEEE802154_NO_ACK = 0xe9,
+	/* A scan operation failed to find any network beacons.*/
+	IEEE802154_NO_BEACON = 0xea,
+	/* No response data were available following a request. */
+	IEEE802154_NO_DATA = 0xeb,
+	/* The operation failed because a short address was not allocated. */
+	IEEE802154_NO_SHORT_ADDRESS = 0xec,
+	/*
+	 * A receiver enable request was unsuccessful because it could not be
+	 * completed within the CAP.
+	 */
+	IEEE802154_OUT_OF_CAP = 0xed,
+	/*
+	 * A PAN identifier conflict has been detected and communicated to the
+	 * PAN coordinator.
+	 */
+	IEEE802154_PANID_CONFLICT = 0xee,
+	/* A coordinator realignment command has been received. */
+	IEEE802154_REALIGMENT = 0xef,
+	/* The transaction has expired and its information discarded. */
+	IEEE802154_TRANSACTION_EXPIRED = 0xf0,
+	/* There is no capacity to store the transaction. */
+	IEEE802154_TRANSACTION_OVERFLOW = 0xf1,
+	/*
+	 * The transceiver was in the transmitter enabled state when the
+	 * receiver was requested to be enabled.
+	 */
+	IEEE802154_TX_ACTIVE = 0xf2,
+	/* The appropriate key is not available in the ACL. */
+	IEEE802154_UNAVAILABLE_KEY = 0xf3,
+	/*
+	 * A SET/GET request was issued with the identifier of a PIB attribute
+	 * that is not supported.
+	 */
+	IEEE802154_UNSUPPORTED_ATTR = 0xf4,
+	/*
+	 * A request to perform a scan operation failed because the MLME was
+	 * in the process of performing a previously initiated scan operation.
+	 */
+	IEEE802154_SCAN_IN_PROGRESS = 0xfc,
+};
+
+
+#endif
+
+
diff --git a/include/net/ieee802154_netdev.h b/include/net/ieee802154_netdev.h
new file mode 100644
index 00000000..57430555
--- /dev/null
+++ b/include/net/ieee802154_netdev.h
@@ -0,0 +1,121 @@
+/*
+ * An interface between IEEE802.15.4 device and rest of the kernel.
+ *
+ * Copyright (C) 2007, 2008, 2009 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Pavel Smolenskiy <pavel.smolenskiy@gmail.com>
+ * Maxim Gorbachyov <maxim.gorbachev@siemens.com>
+ * Maxim Osipov <maxim.osipov@siemens.com>
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ */
+
+#ifndef IEEE802154_NETDEVICE_H
+#define IEEE802154_NETDEVICE_H
+
+/*
+ * A control block of skb passed between the ARPHRD_IEEE802154 device
+ * and other stack parts.
+ */
+struct ieee802154_mac_cb {
+	u8 lqi;
+	struct ieee802154_addr sa;
+	struct ieee802154_addr da;
+	u8 flags;
+	u8 seq;
+};
+
+static inline struct ieee802154_mac_cb *mac_cb(struct sk_buff *skb)
+{
+	return (struct ieee802154_mac_cb *)skb->cb;
+}
+
+#define MAC_CB_FLAG_TYPEMASK		((1 << 3) - 1)
+
+#define MAC_CB_FLAG_ACKREQ		(1 << 3)
+#define MAC_CB_FLAG_SECEN		(1 << 4)
+#define MAC_CB_FLAG_INTRAPAN		(1 << 5)
+
+static inline int mac_cb_is_ackreq(struct sk_buff *skb)
+{
+	return mac_cb(skb)->flags & MAC_CB_FLAG_ACKREQ;
+}
+
+static inline int mac_cb_is_secen(struct sk_buff *skb)
+{
+	return mac_cb(skb)->flags & MAC_CB_FLAG_SECEN;
+}
+
+static inline int mac_cb_is_intrapan(struct sk_buff *skb)
+{
+	return mac_cb(skb)->flags & MAC_CB_FLAG_INTRAPAN;
+}
+
+static inline int mac_cb_type(struct sk_buff *skb)
+{
+	return mac_cb(skb)->flags & MAC_CB_FLAG_TYPEMASK;
+}
+
+#define IEEE802154_MAC_SCAN_ED		0
+#define IEEE802154_MAC_SCAN_ACTIVE	1
+#define IEEE802154_MAC_SCAN_PASSIVE	2
+#define IEEE802154_MAC_SCAN_ORPHAN	3
+
+struct wpan_phy;
+/*
+ * This should be located at net_device->ml_priv
+ *
+ * get_phy should increment the reference counting on returned phy.
+ * Use wpan_wpy_put to put that reference.
+ */
+struct ieee802154_mlme_ops {
+	int (*assoc_req)(struct net_device *dev,
+			struct ieee802154_addr *addr,
+			u8 channel, u8 page, u8 cap);
+	int (*assoc_resp)(struct net_device *dev,
+			struct ieee802154_addr *addr,
+			u16 short_addr, u8 status);
+	int (*disassoc_req)(struct net_device *dev,
+			struct ieee802154_addr *addr,
+			u8 reason);
+	int (*start_req)(struct net_device *dev,
+			struct ieee802154_addr *addr,
+			u8 channel, u8 page, u8 bcn_ord, u8 sf_ord,
+			u8 pan_coord, u8 blx, u8 coord_realign);
+	int (*scan_req)(struct net_device *dev,
+			u8 type, u32 channels, u8 page, u8 duration);
+
+	struct wpan_phy *(*get_phy)(const struct net_device *dev);
+
+	/*
+	 * FIXME: these should become the part of PIB/MIB interface.
+	 * However we still don't have IB interface of any kind
+	 */
+	u16 (*get_pan_id)(const struct net_device *dev);
+	u16 (*get_short_addr)(const struct net_device *dev);
+	u8 (*get_dsn)(const struct net_device *dev);
+	u8 (*get_bsn)(const struct net_device *dev);
+};
+
+static inline struct ieee802154_mlme_ops *ieee802154_mlme_ops(
+		const struct net_device *dev)
+{
+	return dev->ml_priv;
+}
+
+#endif
+
+
diff --git a/include/net/if_inet6.h b/include/net/if_inet6.h
new file mode 100644
index 00000000..51a7031b
--- /dev/null
+++ b/include/net/if_inet6.h
@@ -0,0 +1,304 @@
+/*
+ *	inet6 interface/address list definitions
+ *	Linux INET6 implementation 
+ *
+ *	Authors:
+ *	Pedro Roque		<roque@di.fc.ul.pt>	
+ *
+ *
+ *	This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _NET_IF_INET6_H
+#define _NET_IF_INET6_H
+
+#include <net/snmp.h>
+#include <linux/ipv6.h>
+
+/* inet6_dev.if_flags */
+
+#define IF_RA_OTHERCONF	0x80
+#define IF_RA_MANAGED	0x40
+#define IF_RA_RCVD	0x20
+#define IF_RS_SENT	0x10
+#define IF_READY	0x80000000
+
+/* prefix flags */
+#define IF_PREFIX_ONLINK	0x01
+#define IF_PREFIX_AUTOCONF	0x02
+
+enum {
+	INET6_IFADDR_STATE_DAD,
+	INET6_IFADDR_STATE_POSTDAD,
+	INET6_IFADDR_STATE_UP,
+	INET6_IFADDR_STATE_DEAD,
+};
+
+struct inet6_ifaddr {
+	struct in6_addr		addr;
+	__u32			prefix_len;
+	
+	/* In seconds, relative to tstamp. Expiry is at tstamp + HZ * lft. */
+	__u32			valid_lft;
+	__u32			prefered_lft;
+	atomic_t		refcnt;
+	spinlock_t		lock;
+	spinlock_t		state_lock;
+
+	int			state;
+
+	__u8			probes;
+	__u8			flags;
+
+	__u16			scope;
+
+	unsigned long		cstamp;	/* created timestamp */
+	unsigned long		tstamp; /* updated timestamp */
+
+	struct timer_list	timer;
+
+	struct inet6_dev	*idev;
+	struct rt6_info		*rt;
+
+	struct hlist_node	addr_lst;
+	struct list_head	if_list;
+
+#ifdef CONFIG_IPV6_PRIVACY
+	struct list_head	tmp_list;
+	struct inet6_ifaddr	*ifpub;
+	int			regen_count;
+#endif
+	struct rcu_head		rcu;
+};
+
+struct ip6_sf_socklist {
+	unsigned int		sl_max;
+	unsigned int		sl_count;
+	struct in6_addr		sl_addr[0];
+};
+
+#define IP6_SFLSIZE(count)	(sizeof(struct ip6_sf_socklist) + \
+	(count) * sizeof(struct in6_addr))
+
+#define IP6_SFBLOCK	10	/* allocate this many at once */
+
+struct ipv6_mc_socklist {
+	struct in6_addr		addr;
+	int			ifindex;
+	struct ipv6_mc_socklist __rcu *next;
+	rwlock_t		sflock;
+	unsigned int		sfmode;		/* MCAST_{INCLUDE,EXCLUDE} */
+	struct ip6_sf_socklist	*sflist;
+	struct rcu_head		rcu;
+};
+
+struct ip6_sf_list {
+	struct ip6_sf_list	*sf_next;
+	struct in6_addr		sf_addr;
+	unsigned long		sf_count[2];	/* include/exclude counts */
+	unsigned char		sf_gsresp;	/* include in g & s response? */
+	unsigned char		sf_oldin;	/* change state */
+	unsigned char		sf_crcount;	/* retrans. left to send */
+};
+
+#define MAF_TIMER_RUNNING	0x01
+#define MAF_LAST_REPORTER	0x02
+#define MAF_LOADED		0x04
+#define MAF_NOREPORT		0x08
+#define MAF_GSQUERY		0x10
+
+struct ifmcaddr6 {
+	struct in6_addr		mca_addr;
+	struct inet6_dev	*idev;
+	struct ifmcaddr6	*next;
+	struct ip6_sf_list	*mca_sources;
+	struct ip6_sf_list	*mca_tomb;
+	unsigned int		mca_sfmode;
+	unsigned char		mca_crcount;
+	unsigned long		mca_sfcount[2];
+	struct timer_list	mca_timer;
+	unsigned		mca_flags;
+	int			mca_users;
+	atomic_t		mca_refcnt;
+	spinlock_t		mca_lock;
+	unsigned long		mca_cstamp;
+	unsigned long		mca_tstamp;
+};
+
+/* Anycast stuff */
+
+struct ipv6_ac_socklist {
+	struct in6_addr		acl_addr;
+	int			acl_ifindex;
+	struct ipv6_ac_socklist *acl_next;
+};
+
+struct ifacaddr6 {
+	struct in6_addr		aca_addr;
+	struct inet6_dev	*aca_idev;
+	struct rt6_info		*aca_rt;
+	struct ifacaddr6	*aca_next;
+	int			aca_users;
+	atomic_t		aca_refcnt;
+	spinlock_t		aca_lock;
+	unsigned long		aca_cstamp;
+	unsigned long		aca_tstamp;
+};
+
+#define	IFA_HOST	IPV6_ADDR_LOOPBACK
+#define	IFA_LINK	IPV6_ADDR_LINKLOCAL
+#define	IFA_SITE	IPV6_ADDR_SITELOCAL
+
+struct ipv6_devstat {
+	struct proc_dir_entry	*proc_dir_entry;
+	DEFINE_SNMP_STAT(struct ipstats_mib, ipv6);
+	DEFINE_SNMP_STAT_ATOMIC(struct icmpv6_mib_device, icmpv6dev);
+	DEFINE_SNMP_STAT_ATOMIC(struct icmpv6msg_mib_device, icmpv6msgdev);
+};
+
+struct inet6_dev {
+	struct net_device	*dev;
+
+	struct list_head	addr_list;
+
+	struct ifmcaddr6	*mc_list;
+	struct ifmcaddr6	*mc_tomb;
+	spinlock_t		mc_lock;
+	unsigned char		mc_qrv;
+	unsigned char		mc_gq_running;
+	unsigned char		mc_ifc_count;
+	unsigned long		mc_v1_seen;
+	unsigned long		mc_maxdelay;
+	struct timer_list	mc_gq_timer;	/* general query timer */
+	struct timer_list	mc_ifc_timer;	/* interface change timer */
+
+	struct ifacaddr6	*ac_list;
+	rwlock_t		lock;
+	atomic_t		refcnt;
+	__u32			if_flags;
+	int			dead;
+
+#ifdef CONFIG_IPV6_PRIVACY
+	u8			rndid[8];
+	struct timer_list	regen_timer;
+	struct list_head	tempaddr_list;
+#endif
+
+	struct neigh_parms	*nd_parms;
+	struct inet6_dev	*next;
+	struct ipv6_devconf	cnf;
+	struct ipv6_devstat	stats;
+	unsigned long		tstamp; /* ipv6InterfaceTable update timestamp */
+	struct rcu_head		rcu;
+};
+
+static inline void ipv6_eth_mc_map(const struct in6_addr *addr, char *buf)
+{
+	/*
+	 *	+-------+-------+-------+-------+-------+-------+
+	 *      |   33  |   33  | DST13 | DST14 | DST15 | DST16 |
+	 *      +-------+-------+-------+-------+-------+-------+
+	 */
+
+	buf[0]= 0x33;
+	buf[1]= 0x33;
+
+	memcpy(buf + 2, &addr->s6_addr32[3], sizeof(__u32));
+}
+
+static inline void ipv6_tr_mc_map(const struct in6_addr *addr, char *buf)
+{
+	/* All nodes FF01::1, FF02::1, FF02::1:FFxx:xxxx */
+
+	if (((addr->s6_addr[0] == 0xFF) &&
+	    ((addr->s6_addr[1] == 0x01) || (addr->s6_addr[1] == 0x02)) &&
+	     (addr->s6_addr16[1] == 0) &&
+	     (addr->s6_addr32[1] == 0) &&
+	     (addr->s6_addr32[2] == 0) &&
+	     (addr->s6_addr16[6] == 0) &&
+	     (addr->s6_addr[15] == 1)) ||
+	    ((addr->s6_addr[0] == 0xFF) &&
+	     (addr->s6_addr[1] == 0x02) &&
+	     (addr->s6_addr16[1] == 0) &&
+	     (addr->s6_addr32[1] == 0) &&
+	     (addr->s6_addr16[4] == 0) &&
+	     (addr->s6_addr[10] == 0) &&
+	     (addr->s6_addr[11] == 1) &&
+	     (addr->s6_addr[12] == 0xff)))
+	{
+		buf[0]=0xC0;
+		buf[1]=0x00;
+		buf[2]=0x01;
+		buf[3]=0x00;
+		buf[4]=0x00;
+		buf[5]=0x00;
+	/* All routers FF0x::2 */
+	} else if ((addr->s6_addr[0] ==0xff) &&
+		((addr->s6_addr[1] & 0xF0) == 0) &&
+		(addr->s6_addr16[1] == 0) &&
+		(addr->s6_addr32[1] == 0) &&
+		(addr->s6_addr32[2] == 0) &&
+		(addr->s6_addr16[6] == 0) &&
+		(addr->s6_addr[15] == 2))
+	{
+		buf[0]=0xC0;
+		buf[1]=0x00;
+		buf[2]=0x02;
+		buf[3]=0x00;
+		buf[4]=0x00;
+		buf[5]=0x00;
+	} else {
+		unsigned char i ; 
+		
+		i = addr->s6_addr[15] & 7 ; 
+		buf[0]=0xC0;
+		buf[1]=0x00;
+		buf[2]=0x00;
+		buf[3]=0x01 << i ; 
+		buf[4]=0x00;
+		buf[5]=0x00;
+	}
+}
+
+static inline void ipv6_arcnet_mc_map(const struct in6_addr *addr, char *buf)
+{
+	buf[0] = 0x00;
+}
+
+static inline void ipv6_ib_mc_map(const struct in6_addr *addr,
+				  const unsigned char *broadcast, char *buf)
+{
+	unsigned char scope = broadcast[5] & 0xF;
+
+	buf[0]  = 0;		/* Reserved */
+	buf[1]  = 0xff;		/* Multicast QPN */
+	buf[2]  = 0xff;
+	buf[3]  = 0xff;
+	buf[4]  = 0xff;
+	buf[5]  = 0x10 | scope;	/* scope from broadcast address */
+	buf[6]  = 0x60;		/* IPv6 signature */
+	buf[7]  = 0x1b;
+	buf[8]  = broadcast[8];	/* P_Key */
+	buf[9]  = broadcast[9];
+	memcpy(buf + 10, addr->s6_addr + 6, 10);
+}
+
+static inline int ipv6_ipgre_mc_map(const struct in6_addr *addr,
+				    const unsigned char *broadcast, char *buf)
+{
+	if ((broadcast[0] | broadcast[1] | broadcast[2] | broadcast[3]) != 0) {
+		memcpy(buf, broadcast, 4);
+	} else {
+		/* v4mapped? */
+		if ((addr->s6_addr32[0] | addr->s6_addr32[1] |
+		     (addr->s6_addr32[2] ^ htonl(0x0000ffff))) != 0)
+			return -EINVAL;
+		memcpy(buf, &addr->s6_addr32[3], 4);
+	}
+	return 0;
+}
+
+#endif
diff --git a/include/net/inet6_connection_sock.h b/include/net/inet6_connection_sock.h
new file mode 100644
index 00000000..3207e58e
--- /dev/null
+++ b/include/net/inet6_connection_sock.h
@@ -0,0 +1,45 @@
+/*
+ * NET		Generic infrastructure for INET6 connection oriented protocols.
+ *
+ * Authors:	Many people, see the TCPv6 sources
+ *
+ * 		From code originally in TCPv6
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _INET6_CONNECTION_SOCK_H
+#define _INET6_CONNECTION_SOCK_H
+
+#include <linux/types.h>
+
+struct in6_addr;
+struct inet_bind_bucket;
+struct request_sock;
+struct sk_buff;
+struct sock;
+struct sockaddr;
+
+extern int inet6_csk_bind_conflict(const struct sock *sk,
+				   const struct inet_bind_bucket *tb);
+
+extern struct dst_entry* inet6_csk_route_req(struct sock *sk,
+					     const struct request_sock *req);
+
+extern struct request_sock *inet6_csk_search_req(const struct sock *sk,
+						 struct request_sock ***prevp,
+						 const __be16 rport,
+						 const struct in6_addr *raddr,
+						 const struct in6_addr *laddr,
+						 const int iif);
+
+extern void inet6_csk_reqsk_queue_hash_add(struct sock *sk,
+					   struct request_sock *req,
+					   const unsigned long timeout);
+
+extern void inet6_csk_addr2sockaddr(struct sock *sk, struct sockaddr *uaddr);
+
+extern int inet6_csk_xmit(struct sk_buff *skb, struct flowi *fl);
+#endif /* _INET6_CONNECTION_SOCK_H */
diff --git a/include/net/inet6_hashtables.h b/include/net/inet6_hashtables.h
new file mode 100644
index 00000000..00cbb438
--- /dev/null
+++ b/include/net/inet6_hashtables.h
@@ -0,0 +1,114 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ * Authors:	Lotsa people, from code originally in tcp
+ *
+ *	This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _INET6_HASHTABLES_H
+#define _INET6_HASHTABLES_H
+
+
+#if IS_ENABLED(CONFIG_IPV6)
+#include <linux/in6.h>
+#include <linux/ipv6.h>
+#include <linux/types.h>
+#include <linux/jhash.h>
+
+#include <net/inet_sock.h>
+
+#include <net/ipv6.h>
+#include <net/netns/hash.h>
+
+struct inet_hashinfo;
+
+/* I have no idea if this is a good hash for v6 or not. -DaveM */
+static inline unsigned int inet6_ehashfn(struct net *net,
+				const struct in6_addr *laddr, const u16 lport,
+				const struct in6_addr *faddr, const __be16 fport)
+{
+	u32 ports = (lport ^ (__force u16)fport);
+
+	return jhash_3words((__force u32)laddr->s6_addr32[3],
+			    (__force u32)faddr->s6_addr32[3],
+			    ports, inet_ehash_secret + net_hash_mix(net));
+}
+
+static inline int inet6_sk_ehashfn(const struct sock *sk)
+{
+	const struct inet_sock *inet = inet_sk(sk);
+	const struct ipv6_pinfo *np = inet6_sk(sk);
+	const struct in6_addr *laddr = &np->rcv_saddr;
+	const struct in6_addr *faddr = &np->daddr;
+	const __u16 lport = inet->inet_num;
+	const __be16 fport = inet->inet_dport;
+	struct net *net = sock_net(sk);
+
+	return inet6_ehashfn(net, laddr, lport, faddr, fport);
+}
+
+extern int __inet6_hash(struct sock *sk, struct inet_timewait_sock *twp);
+
+/*
+ * Sockets in TCP_CLOSE state are _always_ taken out of the hash, so
+ * we need not check it for TCP lookups anymore, thanks Alexey. -DaveM
+ *
+ * The sockhash lock must be held as a reader here.
+ */
+extern struct sock *__inet6_lookup_established(struct net *net,
+					   struct inet_hashinfo *hashinfo,
+					   const struct in6_addr *saddr,
+					   const __be16 sport,
+					   const struct in6_addr *daddr,
+					   const u16 hnum,
+					   const int dif);
+
+extern struct sock *inet6_lookup_listener(struct net *net,
+					  struct inet_hashinfo *hashinfo,
+					  const struct in6_addr *daddr,
+					  const unsigned short hnum,
+					  const int dif);
+
+static inline struct sock *__inet6_lookup(struct net *net,
+					  struct inet_hashinfo *hashinfo,
+					  const struct in6_addr *saddr,
+					  const __be16 sport,
+					  const struct in6_addr *daddr,
+					  const u16 hnum,
+					  const int dif)
+{
+	struct sock *sk = __inet6_lookup_established(net, hashinfo, saddr,
+						sport, daddr, hnum, dif);
+	if (sk)
+		return sk;
+
+	return inet6_lookup_listener(net, hashinfo, daddr, hnum, dif);
+}
+
+static inline struct sock *__inet6_lookup_skb(struct inet_hashinfo *hashinfo,
+					      struct sk_buff *skb,
+					      const __be16 sport,
+					      const __be16 dport)
+{
+	struct sock *sk;
+
+	if (unlikely(sk = skb_steal_sock(skb)))
+		return sk;
+	else return __inet6_lookup(dev_net(skb_dst(skb)->dev), hashinfo,
+				   &ipv6_hdr(skb)->saddr, sport,
+				   &ipv6_hdr(skb)->daddr, ntohs(dport),
+				   inet6_iif(skb));
+}
+
+extern struct sock *inet6_lookup(struct net *net, struct inet_hashinfo *hashinfo,
+				 const struct in6_addr *saddr, const __be16 sport,
+				 const struct in6_addr *daddr, const __be16 dport,
+				 const int dif);
+#endif /* IS_ENABLED(CONFIG_IPV6) */
+#endif /* _INET6_HASHTABLES_H */
diff --git a/include/net/inet_common.h b/include/net/inet_common.h
new file mode 100644
index 00000000..22fac989
--- /dev/null
+++ b/include/net/inet_common.h
@@ -0,0 +1,44 @@
+#ifndef _INET_COMMON_H
+#define _INET_COMMON_H
+
+extern const struct proto_ops inet_stream_ops;
+extern const struct proto_ops inet_dgram_ops;
+
+/*
+ *	INET4 prototypes used by INET6
+ */
+
+struct msghdr;
+struct sock;
+struct sockaddr;
+struct socket;
+
+extern int inet_release(struct socket *sock);
+extern int inet_stream_connect(struct socket *sock, struct sockaddr * uaddr,
+			       int addr_len, int flags);
+extern int inet_dgram_connect(struct socket *sock, struct sockaddr * uaddr,
+			      int addr_len, int flags);
+extern int inet_accept(struct socket *sock, struct socket *newsock, int flags);
+extern int inet_sendmsg(struct kiocb *iocb, struct socket *sock,
+			struct msghdr *msg, size_t size);
+extern ssize_t inet_sendpage(struct socket *sock, struct page *page, int offset,
+			     size_t size, int flags);
+extern int inet_recvmsg(struct kiocb *iocb, struct socket *sock,
+			struct msghdr *msg, size_t size, int flags);
+extern int inet_shutdown(struct socket *sock, int how);
+extern int inet_listen(struct socket *sock, int backlog);
+extern void inet_sock_destruct(struct sock *sk);
+extern int inet_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len);
+extern int inet_getname(struct socket *sock, struct sockaddr *uaddr,
+			int *uaddr_len, int peer);
+extern int inet_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg);
+extern int inet_ctl_sock_create(struct sock **sk, unsigned short family,
+				unsigned short type, unsigned char protocol,
+				struct net *net);
+
+static inline void inet_ctl_sock_destroy(struct sock *sk)
+{
+	sk_release_kernel(sk);
+}
+
+#endif
diff --git a/include/net/inet_connection_sock.h b/include/net/inet_connection_sock.h
new file mode 100644
index 00000000..dbf9aab3
--- /dev/null
+++ b/include/net/inet_connection_sock.h
@@ -0,0 +1,339 @@
+/*
+ * NET		Generic infrastructure for INET connection oriented protocols.
+ *
+ *		Definitions for inet_connection_sock 
+ *
+ * Authors:	Many people, see the TCP sources
+ *
+ * 		From code originally in TCP
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _INET_CONNECTION_SOCK_H
+#define _INET_CONNECTION_SOCK_H
+
+#include <linux/compiler.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/poll.h>
+
+#include <net/inet_sock.h>
+#include <net/request_sock.h>
+
+#define INET_CSK_DEBUG 1
+
+/* Cancel timers, when they are not required. */
+#undef INET_CSK_CLEAR_TIMERS
+
+struct inet_bind_bucket;
+struct tcp_congestion_ops;
+
+/*
+ * Pointers to address related TCP functions
+ * (i.e. things that depend on the address family)
+ */
+struct inet_connection_sock_af_ops {
+	int	    (*queue_xmit)(struct sk_buff *skb, struct flowi *fl);
+	void	    (*send_check)(struct sock *sk, struct sk_buff *skb);
+	int	    (*rebuild_header)(struct sock *sk);
+	int	    (*conn_request)(struct sock *sk, struct sk_buff *skb);
+	struct sock *(*syn_recv_sock)(struct sock *sk, struct sk_buff *skb,
+				      struct request_sock *req,
+				      struct dst_entry *dst);
+	struct inet_peer *(*get_peer)(struct sock *sk, bool *release_it);
+	u16	    net_header_len;
+	u16	    sockaddr_len;
+	int	    (*setsockopt)(struct sock *sk, int level, int optname, 
+				  char __user *optval, unsigned int optlen);
+	int	    (*getsockopt)(struct sock *sk, int level, int optname, 
+				  char __user *optval, int __user *optlen);
+#ifdef CONFIG_COMPAT
+	int	    (*compat_setsockopt)(struct sock *sk,
+				int level, int optname,
+				char __user *optval, unsigned int optlen);
+	int	    (*compat_getsockopt)(struct sock *sk,
+				int level, int optname,
+				char __user *optval, int __user *optlen);
+#endif
+	void	    (*addr2sockaddr)(struct sock *sk, struct sockaddr *);
+	int	    (*bind_conflict)(const struct sock *sk,
+				     const struct inet_bind_bucket *tb);
+};
+
+/** inet_connection_sock - INET connection oriented sock
+ *
+ * @icsk_accept_queue:	   FIFO of established children 
+ * @icsk_bind_hash:	   Bind node
+ * @icsk_timeout:	   Timeout
+ * @icsk_retransmit_timer: Resend (no ack)
+ * @icsk_rto:		   Retransmit timeout
+ * @icsk_pmtu_cookie	   Last pmtu seen by socket
+ * @icsk_ca_ops		   Pluggable congestion control hook
+ * @icsk_af_ops		   Operations which are AF_INET{4,6} specific
+ * @icsk_ca_state:	   Congestion control state
+ * @icsk_retransmits:	   Number of unrecovered [RTO] timeouts
+ * @icsk_pending:	   Scheduled timer event
+ * @icsk_backoff:	   Backoff
+ * @icsk_syn_retries:      Number of allowed SYN (or equivalent) retries
+ * @icsk_probes_out:	   unanswered 0 window probes
+ * @icsk_ext_hdr_len:	   Network protocol overhead (IP/IPv6 options)
+ * @icsk_ack:		   Delayed ACK control data
+ * @icsk_mtup;		   MTU probing control data
+ */
+struct inet_connection_sock {
+	/* inet_sock has to be the first member! */
+	struct inet_sock	  icsk_inet;
+	struct request_sock_queue icsk_accept_queue;
+	struct inet_bind_bucket	  *icsk_bind_hash;
+	unsigned long		  icsk_timeout;
+ 	struct timer_list	  icsk_retransmit_timer;
+ 	struct timer_list	  icsk_delack_timer;
+	__u32			  icsk_rto;
+	__u32			  icsk_pmtu_cookie;
+	const struct tcp_congestion_ops *icsk_ca_ops;
+	const struct inet_connection_sock_af_ops *icsk_af_ops;
+	unsigned int		  (*icsk_sync_mss)(struct sock *sk, u32 pmtu);
+	__u8			  icsk_ca_state;
+	__u8			  icsk_retransmits;
+	__u8			  icsk_pending;
+	__u8			  icsk_backoff;
+	__u8			  icsk_syn_retries;
+	__u8			  icsk_probes_out;
+	__u16			  icsk_ext_hdr_len;
+	struct {
+		__u8		  pending;	 /* ACK is pending			   */
+		__u8		  quick;	 /* Scheduled number of quick acks	   */
+		__u8		  pingpong;	 /* The session is interactive		   */
+		__u8		  blocked;	 /* Delayed ACK was blocked by socket lock */
+		__u32		  ato;		 /* Predicted tick of soft clock	   */
+		unsigned long	  timeout;	 /* Currently scheduled timeout		   */
+		__u32		  lrcvtime;	 /* timestamp of last received data packet */
+		__u16		  last_seg_size; /* Size of last incoming segment	   */
+		__u16		  rcv_mss;	 /* MSS used for delayed ACK decisions	   */ 
+	} icsk_ack;
+	struct {
+		int		  enabled;
+
+		/* Range of MTUs to search */
+		int		  search_high;
+		int		  search_low;
+
+		/* Information on the current probe. */
+		int		  probe_size;
+	} icsk_mtup;
+	u32			  icsk_ca_priv[16];
+	u32			  icsk_user_timeout;
+#define ICSK_CA_PRIV_SIZE	(16 * sizeof(u32))
+};
+
+#define ICSK_TIME_RETRANS	1	/* Retransmit timer */
+#define ICSK_TIME_DACK		2	/* Delayed ack timer */
+#define ICSK_TIME_PROBE0	3	/* Zero window probe timer */
+
+static inline struct inet_connection_sock *inet_csk(const struct sock *sk)
+{
+	return (struct inet_connection_sock *)sk;
+}
+
+static inline void *inet_csk_ca(const struct sock *sk)
+{
+	return (void *)inet_csk(sk)->icsk_ca_priv;
+}
+
+extern struct sock *inet_csk_clone_lock(const struct sock *sk,
+					const struct request_sock *req,
+					const gfp_t priority);
+
+enum inet_csk_ack_state_t {
+	ICSK_ACK_SCHED	= 1,
+	ICSK_ACK_TIMER  = 2,
+	ICSK_ACK_PUSHED = 4,
+	ICSK_ACK_PUSHED2 = 8
+};
+
+extern void inet_csk_init_xmit_timers(struct sock *sk,
+				      void (*retransmit_handler)(unsigned long),
+				      void (*delack_handler)(unsigned long),
+				      void (*keepalive_handler)(unsigned long));
+extern void inet_csk_clear_xmit_timers(struct sock *sk);
+
+static inline void inet_csk_schedule_ack(struct sock *sk)
+{
+	inet_csk(sk)->icsk_ack.pending |= ICSK_ACK_SCHED;
+}
+
+static inline int inet_csk_ack_scheduled(const struct sock *sk)
+{
+	return inet_csk(sk)->icsk_ack.pending & ICSK_ACK_SCHED;
+}
+
+static inline void inet_csk_delack_init(struct sock *sk)
+{
+	memset(&inet_csk(sk)->icsk_ack, 0, sizeof(inet_csk(sk)->icsk_ack));
+}
+
+extern void inet_csk_delete_keepalive_timer(struct sock *sk);
+extern void inet_csk_reset_keepalive_timer(struct sock *sk, unsigned long timeout);
+
+#ifdef INET_CSK_DEBUG
+extern const char inet_csk_timer_bug_msg[];
+#endif
+
+static inline void inet_csk_clear_xmit_timer(struct sock *sk, const int what)
+{
+	struct inet_connection_sock *icsk = inet_csk(sk);
+	
+	if (what == ICSK_TIME_RETRANS || what == ICSK_TIME_PROBE0) {
+		icsk->icsk_pending = 0;
+#ifdef INET_CSK_CLEAR_TIMERS
+		sk_stop_timer(sk, &icsk->icsk_retransmit_timer);
+#endif
+	} else if (what == ICSK_TIME_DACK) {
+		icsk->icsk_ack.blocked = icsk->icsk_ack.pending = 0;
+#ifdef INET_CSK_CLEAR_TIMERS
+		sk_stop_timer(sk, &icsk->icsk_delack_timer);
+#endif
+	}
+#ifdef INET_CSK_DEBUG
+	else {
+		pr_debug("%s", inet_csk_timer_bug_msg);
+	}
+#endif
+}
+
+/*
+ *	Reset the retransmission timer
+ */
+static inline void inet_csk_reset_xmit_timer(struct sock *sk, const int what,
+					     unsigned long when,
+					     const unsigned long max_when)
+{
+	struct inet_connection_sock *icsk = inet_csk(sk);
+
+	if (when > max_when) {
+#ifdef INET_CSK_DEBUG
+		pr_debug("reset_xmit_timer: sk=%p %d when=0x%lx, caller=%p\n",
+			 sk, what, when, current_text_addr());
+#endif
+		when = max_when;
+	}
+
+	if (what == ICSK_TIME_RETRANS || what == ICSK_TIME_PROBE0) {
+		icsk->icsk_pending = what;
+		icsk->icsk_timeout = jiffies + when;
+		sk_reset_timer(sk, &icsk->icsk_retransmit_timer, icsk->icsk_timeout);
+	} else if (what == ICSK_TIME_DACK) {
+		icsk->icsk_ack.pending |= ICSK_ACK_TIMER;
+		icsk->icsk_ack.timeout = jiffies + when;
+		sk_reset_timer(sk, &icsk->icsk_delack_timer, icsk->icsk_ack.timeout);
+	}
+#ifdef INET_CSK_DEBUG
+	else {
+		pr_debug("%s", inet_csk_timer_bug_msg);
+	}
+#endif
+}
+
+extern struct sock *inet_csk_accept(struct sock *sk, int flags, int *err);
+
+extern struct request_sock *inet_csk_search_req(const struct sock *sk,
+						struct request_sock ***prevp,
+						const __be16 rport,
+						const __be32 raddr,
+						const __be32 laddr);
+extern int inet_csk_bind_conflict(const struct sock *sk,
+				  const struct inet_bind_bucket *tb);
+extern int inet_csk_get_port(struct sock *sk, unsigned short snum);
+
+extern struct dst_entry* inet_csk_route_req(struct sock *sk,
+					    struct flowi4 *fl4,
+					    const struct request_sock *req);
+extern struct dst_entry* inet_csk_route_child_sock(struct sock *sk,
+						   struct sock *newsk,
+						   const struct request_sock *req);
+
+static inline void inet_csk_reqsk_queue_add(struct sock *sk,
+					    struct request_sock *req,
+					    struct sock *child)
+{
+	reqsk_queue_add(&inet_csk(sk)->icsk_accept_queue, req, sk, child);
+}
+
+extern void inet_csk_reqsk_queue_hash_add(struct sock *sk,
+					  struct request_sock *req,
+					  unsigned long timeout);
+
+static inline void inet_csk_reqsk_queue_removed(struct sock *sk,
+						struct request_sock *req)
+{
+	if (reqsk_queue_removed(&inet_csk(sk)->icsk_accept_queue, req) == 0)
+		inet_csk_delete_keepalive_timer(sk);
+}
+
+static inline void inet_csk_reqsk_queue_added(struct sock *sk,
+					      const unsigned long timeout)
+{
+	if (reqsk_queue_added(&inet_csk(sk)->icsk_accept_queue) == 0)
+		inet_csk_reset_keepalive_timer(sk, timeout);
+}
+
+static inline int inet_csk_reqsk_queue_len(const struct sock *sk)
+{
+	return reqsk_queue_len(&inet_csk(sk)->icsk_accept_queue);
+}
+
+static inline int inet_csk_reqsk_queue_young(const struct sock *sk)
+{
+	return reqsk_queue_len_young(&inet_csk(sk)->icsk_accept_queue);
+}
+
+static inline int inet_csk_reqsk_queue_is_full(const struct sock *sk)
+{
+	return reqsk_queue_is_full(&inet_csk(sk)->icsk_accept_queue);
+}
+
+static inline void inet_csk_reqsk_queue_unlink(struct sock *sk,
+					       struct request_sock *req,
+					       struct request_sock **prev)
+{
+	reqsk_queue_unlink(&inet_csk(sk)->icsk_accept_queue, req, prev);
+}
+
+static inline void inet_csk_reqsk_queue_drop(struct sock *sk,
+					     struct request_sock *req,
+					     struct request_sock **prev)
+{
+	inet_csk_reqsk_queue_unlink(sk, req, prev);
+	inet_csk_reqsk_queue_removed(sk, req);
+	reqsk_free(req);
+}
+
+extern void inet_csk_reqsk_queue_prune(struct sock *parent,
+				       const unsigned long interval,
+				       const unsigned long timeout,
+				       const unsigned long max_rto);
+
+extern void inet_csk_destroy_sock(struct sock *sk);
+
+/*
+ * LISTEN is a special case for poll..
+ */
+static inline unsigned int inet_csk_listen_poll(const struct sock *sk)
+{
+	return !reqsk_queue_empty(&inet_csk(sk)->icsk_accept_queue) ?
+			(POLLIN | POLLRDNORM) : 0;
+}
+
+extern int  inet_csk_listen_start(struct sock *sk, const int nr_table_entries);
+extern void inet_csk_listen_stop(struct sock *sk);
+
+extern void inet_csk_addr2sockaddr(struct sock *sk, struct sockaddr *uaddr);
+
+extern int inet_csk_compat_getsockopt(struct sock *sk, int level, int optname,
+				      char __user *optval, int __user *optlen);
+extern int inet_csk_compat_setsockopt(struct sock *sk, int level, int optname,
+				      char __user *optval, unsigned int optlen);
+#endif /* _INET_CONNECTION_SOCK_H */
diff --git a/include/net/inet_ecn.h b/include/net/inet_ecn.h
new file mode 100644
index 00000000..2fa14691
--- /dev/null
+++ b/include/net/inet_ecn.h
@@ -0,0 +1,148 @@
+#ifndef _INET_ECN_H_
+#define _INET_ECN_H_
+
+#include <linux/ip.h>
+#include <linux/skbuff.h>
+
+#include <net/inet_sock.h>
+#include <net/dsfield.h>
+
+enum {
+	INET_ECN_NOT_ECT = 0,
+	INET_ECN_ECT_1 = 1,
+	INET_ECN_ECT_0 = 2,
+	INET_ECN_CE = 3,
+	INET_ECN_MASK = 3,
+};
+
+static inline int INET_ECN_is_ce(__u8 dsfield)
+{
+	return (dsfield & INET_ECN_MASK) == INET_ECN_CE;
+}
+
+static inline int INET_ECN_is_not_ect(__u8 dsfield)
+{
+	return (dsfield & INET_ECN_MASK) == INET_ECN_NOT_ECT;
+}
+
+static inline int INET_ECN_is_capable(__u8 dsfield)
+{
+	return dsfield & INET_ECN_ECT_0;
+}
+
+/*
+ * RFC 3168 9.1.1
+ *  The full-functionality option for ECN encapsulation is to copy the
+ *  ECN codepoint of the inside header to the outside header on
+ *  encapsulation if the inside header is not-ECT or ECT, and to set the
+ *  ECN codepoint of the outside header to ECT(0) if the ECN codepoint of
+ *  the inside header is CE.
+ */
+static inline __u8 INET_ECN_encapsulate(__u8 outer, __u8 inner)
+{
+	outer &= ~INET_ECN_MASK;
+	outer |= !INET_ECN_is_ce(inner) ? (inner & INET_ECN_MASK) :
+					  INET_ECN_ECT_0;
+	return outer;
+}
+
+static inline void INET_ECN_xmit(struct sock *sk)
+{
+	inet_sk(sk)->tos |= INET_ECN_ECT_0;
+	if (inet6_sk(sk) != NULL)
+		inet6_sk(sk)->tclass |= INET_ECN_ECT_0;
+}
+
+static inline void INET_ECN_dontxmit(struct sock *sk)
+{
+	inet_sk(sk)->tos &= ~INET_ECN_MASK;
+	if (inet6_sk(sk) != NULL)
+		inet6_sk(sk)->tclass &= ~INET_ECN_MASK;
+}
+
+#define IP6_ECN_flow_init(label) do {		\
+      (label) &= ~htonl(INET_ECN_MASK << 20);	\
+    } while (0)
+
+#define	IP6_ECN_flow_xmit(sk, label) do {				\
+	if (INET_ECN_is_capable(inet6_sk(sk)->tclass))			\
+		(label) |= htonl(INET_ECN_ECT_0 << 20);			\
+    } while (0)
+
+static inline int IP_ECN_set_ce(struct iphdr *iph)
+{
+	u32 check = (__force u32)iph->check;
+	u32 ecn = (iph->tos + 1) & INET_ECN_MASK;
+
+	/*
+	 * After the last operation we have (in binary):
+	 * INET_ECN_NOT_ECT => 01
+	 * INET_ECN_ECT_1   => 10
+	 * INET_ECN_ECT_0   => 11
+	 * INET_ECN_CE      => 00
+	 */
+	if (!(ecn & 2))
+		return !ecn;
+
+	/*
+	 * The following gives us:
+	 * INET_ECN_ECT_1 => check += htons(0xFFFD)
+	 * INET_ECN_ECT_0 => check += htons(0xFFFE)
+	 */
+	check += (__force u16)htons(0xFFFB) + (__force u16)htons(ecn);
+
+	iph->check = (__force __sum16)(check + (check>=0xFFFF));
+	iph->tos |= INET_ECN_CE;
+	return 1;
+}
+
+static inline void IP_ECN_clear(struct iphdr *iph)
+{
+	iph->tos &= ~INET_ECN_MASK;
+}
+
+static inline void ipv4_copy_dscp(unsigned int dscp, struct iphdr *inner)
+{
+	dscp &= ~INET_ECN_MASK;
+	ipv4_change_dsfield(inner, INET_ECN_MASK, dscp);
+}
+
+struct ipv6hdr;
+
+static inline int IP6_ECN_set_ce(struct ipv6hdr *iph)
+{
+	if (INET_ECN_is_not_ect(ipv6_get_dsfield(iph)))
+		return 0;
+	*(__be32*)iph |= htonl(INET_ECN_CE << 20);
+	return 1;
+}
+
+static inline void IP6_ECN_clear(struct ipv6hdr *iph)
+{
+	*(__be32*)iph &= ~htonl(INET_ECN_MASK << 20);
+}
+
+static inline void ipv6_copy_dscp(unsigned int dscp, struct ipv6hdr *inner)
+{
+	dscp &= ~INET_ECN_MASK;
+	ipv6_change_dsfield(inner, INET_ECN_MASK, dscp);
+}
+
+static inline int INET_ECN_set_ce(struct sk_buff *skb)
+{
+	switch (skb->protocol) {
+	case cpu_to_be16(ETH_P_IP):
+		if (skb->network_header + sizeof(struct iphdr) <= skb->tail)
+			return IP_ECN_set_ce(ip_hdr(skb));
+		break;
+
+	case cpu_to_be16(ETH_P_IPV6):
+		if (skb->network_header + sizeof(struct ipv6hdr) <= skb->tail)
+			return IP6_ECN_set_ce(ipv6_hdr(skb));
+		break;
+	}
+
+	return 0;
+}
+
+#endif
diff --git a/include/net/inet_frag.h b/include/net/inet_frag.h
new file mode 100644
index 00000000..16ff29a7
--- /dev/null
+++ b/include/net/inet_frag.h
@@ -0,0 +1,74 @@
+#ifndef __NET_FRAG_H__
+#define __NET_FRAG_H__
+
+struct netns_frags {
+	int			nqueues;
+	atomic_t		mem;
+	struct list_head	lru_list;
+
+	/* sysctls */
+	int			timeout;
+	int			high_thresh;
+	int			low_thresh;
+};
+
+struct inet_frag_queue {
+	struct hlist_node	list;
+	struct netns_frags	*net;
+	struct list_head	lru_list;   /* lru list member */
+	spinlock_t		lock;
+	atomic_t		refcnt;
+	struct timer_list	timer;      /* when will this queue expire? */
+	struct sk_buff		*fragments; /* list of received fragments */
+	struct sk_buff		*fragments_tail;
+	ktime_t			stamp;
+	int			len;        /* total length of orig datagram */
+	int			meat;
+	__u8			last_in;    /* first/last segment arrived? */
+
+#define INET_FRAG_COMPLETE	4
+#define INET_FRAG_FIRST_IN	2
+#define INET_FRAG_LAST_IN	1
+};
+
+#define INETFRAGS_HASHSZ		64
+
+struct inet_frags {
+	struct hlist_head	hash[INETFRAGS_HASHSZ];
+	rwlock_t		lock;
+	u32			rnd;
+	int			qsize;
+	int			secret_interval;
+	struct timer_list	secret_timer;
+
+	unsigned int		(*hashfn)(struct inet_frag_queue *);
+	void			(*constructor)(struct inet_frag_queue *q,
+						void *arg);
+	void			(*destructor)(struct inet_frag_queue *);
+	void			(*skb_free)(struct sk_buff *);
+	int			(*match)(struct inet_frag_queue *q,
+						void *arg);
+	void			(*frag_expire)(unsigned long data);
+};
+
+void inet_frags_init(struct inet_frags *);
+void inet_frags_fini(struct inet_frags *);
+
+void inet_frags_init_net(struct netns_frags *nf);
+void inet_frags_exit_net(struct netns_frags *nf, struct inet_frags *f);
+
+void inet_frag_kill(struct inet_frag_queue *q, struct inet_frags *f);
+void inet_frag_destroy(struct inet_frag_queue *q,
+				struct inet_frags *f, int *work);
+int inet_frag_evictor(struct netns_frags *nf, struct inet_frags *f);
+struct inet_frag_queue *inet_frag_find(struct netns_frags *nf,
+		struct inet_frags *f, void *key, unsigned int hash)
+	__releases(&f->lock);
+
+static inline void inet_frag_put(struct inet_frag_queue *q, struct inet_frags *f)
+{
+	if (atomic_dec_and_test(&q->refcnt))
+		inet_frag_destroy(q, f, NULL);
+}
+
+#endif
diff --git a/include/net/inet_hashtables.h b/include/net/inet_hashtables.h
new file mode 100644
index 00000000..808fc5f7
--- /dev/null
+++ b/include/net/inet_hashtables.h
@@ -0,0 +1,402 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ * Authors:	Lotsa people, from code originally in tcp
+ *
+ *	This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _INET_HASHTABLES_H
+#define _INET_HASHTABLES_H
+
+
+#include <linux/interrupt.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/socket.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/vmalloc.h>
+
+#include <net/inet_connection_sock.h>
+#include <net/inet_sock.h>
+#include <net/sock.h>
+#include <net/route.h>
+#include <net/tcp_states.h>
+#include <net/netns/hash.h>
+
+#include <linux/atomic.h>
+#include <asm/byteorder.h>
+
+/* This is for all connections with a full identity, no wildcards.
+ * One chain is dedicated to TIME_WAIT sockets.
+ * I'll experiment with dynamic table growth later.
+ */
+struct inet_ehash_bucket {
+	struct hlist_nulls_head chain;
+	struct hlist_nulls_head twchain;
+};
+
+/* There are a few simple rules, which allow for local port reuse by
+ * an application.  In essence:
+ *
+ *	1) Sockets bound to different interfaces may share a local port.
+ *	   Failing that, goto test 2.
+ *	2) If all sockets have sk->sk_reuse set, and none of them are in
+ *	   TCP_LISTEN state, the port may be shared.
+ *	   Failing that, goto test 3.
+ *	3) If all sockets are bound to a specific inet_sk(sk)->rcv_saddr local
+ *	   address, and none of them are the same, the port may be
+ *	   shared.
+ *	   Failing this, the port cannot be shared.
+ *
+ * The interesting point, is test #2.  This is what an FTP server does
+ * all day.  To optimize this case we use a specific flag bit defined
+ * below.  As we add sockets to a bind bucket list, we perform a
+ * check of: (newsk->sk_reuse && (newsk->sk_state != TCP_LISTEN))
+ * As long as all sockets added to a bind bucket pass this test,
+ * the flag bit will be set.
+ * The resulting situation is that tcp_v[46]_verify_bind() can just check
+ * for this flag bit, if it is set and the socket trying to bind has
+ * sk->sk_reuse set, we don't even have to walk the owners list at all,
+ * we return that it is ok to bind this socket to the requested local port.
+ *
+ * Sounds like a lot of work, but it is worth it.  In a more naive
+ * implementation (ie. current FreeBSD etc.) the entire list of ports
+ * must be walked for each data port opened by an ftp server.  Needless
+ * to say, this does not scale at all.  With a couple thousand FTP
+ * users logged onto your box, isn't it nice to know that new data
+ * ports are created in O(1) time?  I thought so. ;-)	-DaveM
+ */
+struct inet_bind_bucket {
+#ifdef CONFIG_NET_NS
+	struct net		*ib_net;
+#endif
+	unsigned short		port;
+	signed short		fastreuse;
+	int			num_owners;
+	struct hlist_node	node;
+	struct hlist_head	owners;
+};
+
+static inline struct net *ib_net(struct inet_bind_bucket *ib)
+{
+	return read_pnet(&ib->ib_net);
+}
+
+#define inet_bind_bucket_for_each(tb, pos, head) \
+	hlist_for_each_entry(tb, pos, head, node)
+
+struct inet_bind_hashbucket {
+	spinlock_t		lock;
+	struct hlist_head	chain;
+};
+
+/*
+ * Sockets can be hashed in established or listening table
+ * We must use different 'nulls' end-of-chain value for listening
+ * hash table, or we might find a socket that was closed and
+ * reallocated/inserted into established hash table
+ */
+#define LISTENING_NULLS_BASE (1U << 29)
+struct inet_listen_hashbucket {
+	spinlock_t		lock;
+	struct hlist_nulls_head	head;
+};
+
+/* This is for listening sockets, thus all sockets which possess wildcards. */
+#define INET_LHTABLE_SIZE	32	/* Yes, really, this is all you need. */
+
+struct inet_hashinfo {
+	/* This is for sockets with full identity only.  Sockets here will
+	 * always be without wildcards and will have the following invariant:
+	 *
+	 *          TCP_ESTABLISHED <= sk->sk_state < TCP_CLOSE
+	 *
+	 * TIME_WAIT sockets use a separate chain (twchain).
+	 */
+	struct inet_ehash_bucket	*ehash;
+	spinlock_t			*ehash_locks;
+	unsigned int			ehash_mask;
+	unsigned int			ehash_locks_mask;
+
+	/* Ok, let's try this, I give up, we do need a local binding
+	 * TCP hash as well as the others for fast bind/connect.
+	 */
+	struct inet_bind_hashbucket	*bhash;
+
+	unsigned int			bhash_size;
+	/* 4 bytes hole on 64 bit */
+
+	struct kmem_cache		*bind_bucket_cachep;
+
+	/* All the above members are written once at bootup and
+	 * never written again _or_ are predominantly read-access.
+	 *
+	 * Now align to a new cache line as all the following members
+	 * might be often dirty.
+	 */
+	/* All sockets in TCP_LISTEN state will be in here.  This is the only
+	 * table where wildcard'd TCP sockets can exist.  Hash function here
+	 * is just local port number.
+	 */
+	struct inet_listen_hashbucket	listening_hash[INET_LHTABLE_SIZE]
+					____cacheline_aligned_in_smp;
+
+	atomic_t			bsockets;
+};
+
+static inline struct inet_ehash_bucket *inet_ehash_bucket(
+	struct inet_hashinfo *hashinfo,
+	unsigned int hash)
+{
+	return &hashinfo->ehash[hash & hashinfo->ehash_mask];
+}
+
+static inline spinlock_t *inet_ehash_lockp(
+	struct inet_hashinfo *hashinfo,
+	unsigned int hash)
+{
+	return &hashinfo->ehash_locks[hash & hashinfo->ehash_locks_mask];
+}
+
+static inline int inet_ehash_locks_alloc(struct inet_hashinfo *hashinfo)
+{
+	unsigned int i, size = 256;
+#if defined(CONFIG_PROVE_LOCKING)
+	unsigned int nr_pcpus = 2;
+#else
+	unsigned int nr_pcpus = num_possible_cpus();
+#endif
+	if (nr_pcpus >= 4)
+		size = 512;
+	if (nr_pcpus >= 8)
+		size = 1024;
+	if (nr_pcpus >= 16)
+		size = 2048;
+	if (nr_pcpus >= 32)
+		size = 4096;
+	if (sizeof(spinlock_t) != 0) {
+#ifdef CONFIG_NUMA
+		if (size * sizeof(spinlock_t) > PAGE_SIZE)
+			hashinfo->ehash_locks = vmalloc(size * sizeof(spinlock_t));
+		else
+#endif
+		hashinfo->ehash_locks =	kmalloc(size * sizeof(spinlock_t),
+						GFP_KERNEL);
+		if (!hashinfo->ehash_locks)
+			return ENOMEM;
+		for (i = 0; i < size; i++)
+			spin_lock_init(&hashinfo->ehash_locks[i]);
+	}
+	hashinfo->ehash_locks_mask = size - 1;
+	return 0;
+}
+
+static inline void inet_ehash_locks_free(struct inet_hashinfo *hashinfo)
+{
+	if (hashinfo->ehash_locks) {
+#ifdef CONFIG_NUMA
+		unsigned int size = (hashinfo->ehash_locks_mask + 1) *
+							sizeof(spinlock_t);
+		if (size > PAGE_SIZE)
+			vfree(hashinfo->ehash_locks);
+		else
+#endif
+		kfree(hashinfo->ehash_locks);
+		hashinfo->ehash_locks = NULL;
+	}
+}
+
+extern struct inet_bind_bucket *
+		    inet_bind_bucket_create(struct kmem_cache *cachep,
+					    struct net *net,
+					    struct inet_bind_hashbucket *head,
+					    const unsigned short snum);
+extern void inet_bind_bucket_destroy(struct kmem_cache *cachep,
+				     struct inet_bind_bucket *tb);
+
+static inline int inet_bhashfn(struct net *net,
+		const __u16 lport, const int bhash_size)
+{
+	return (lport + net_hash_mix(net)) & (bhash_size - 1);
+}
+
+extern void inet_bind_hash(struct sock *sk, struct inet_bind_bucket *tb,
+			   const unsigned short snum);
+
+/* These can have wildcards, don't try too hard. */
+static inline int inet_lhashfn(struct net *net, const unsigned short num)
+{
+	return (num + net_hash_mix(net)) & (INET_LHTABLE_SIZE - 1);
+}
+
+static inline int inet_sk_listen_hashfn(const struct sock *sk)
+{
+	return inet_lhashfn(sock_net(sk), inet_sk(sk)->inet_num);
+}
+
+/* Caller must disable local BH processing. */
+extern int __inet_inherit_port(struct sock *sk, struct sock *child);
+
+extern void inet_put_port(struct sock *sk);
+
+void inet_hashinfo_init(struct inet_hashinfo *h);
+
+extern int __inet_hash_nolisten(struct sock *sk, struct inet_timewait_sock *tw);
+extern void inet_hash(struct sock *sk);
+extern void inet_unhash(struct sock *sk);
+
+extern struct sock *__inet_lookup_listener(struct net *net,
+					   struct inet_hashinfo *hashinfo,
+					   const __be32 daddr,
+					   const unsigned short hnum,
+					   const int dif);
+
+static inline struct sock *inet_lookup_listener(struct net *net,
+		struct inet_hashinfo *hashinfo,
+		__be32 daddr, __be16 dport, int dif)
+{
+	return __inet_lookup_listener(net, hashinfo, daddr, ntohs(dport), dif);
+}
+
+/* Socket demux engine toys. */
+/* What happens here is ugly; there's a pair of adjacent fields in
+   struct inet_sock; __be16 dport followed by __u16 num.  We want to
+   search by pair, so we combine the keys into a single 32bit value
+   and compare with 32bit value read from &...->dport.  Let's at least
+   make sure that it's not mixed with anything else...
+   On 64bit targets we combine comparisons with pair of adjacent __be32
+   fields in the same way.
+*/
+typedef __u32 __bitwise __portpair;
+#ifdef __BIG_ENDIAN
+#define INET_COMBINED_PORTS(__sport, __dport) \
+	((__force __portpair)(((__force __u32)(__be16)(__sport) << 16) | (__u32)(__dport)))
+#else /* __LITTLE_ENDIAN */
+#define INET_COMBINED_PORTS(__sport, __dport) \
+	((__force __portpair)(((__u32)(__dport) << 16) | (__force __u32)(__be16)(__sport)))
+#endif
+
+#if (BITS_PER_LONG == 64)
+typedef __u64 __bitwise __addrpair;
+#ifdef __BIG_ENDIAN
+#define INET_ADDR_COOKIE(__name, __saddr, __daddr) \
+	const __addrpair __name = (__force __addrpair) ( \
+				   (((__force __u64)(__be32)(__saddr)) << 32) | \
+				   ((__force __u64)(__be32)(__daddr)));
+#else /* __LITTLE_ENDIAN */
+#define INET_ADDR_COOKIE(__name, __saddr, __daddr) \
+	const __addrpair __name = (__force __addrpair) ( \
+				   (((__force __u64)(__be32)(__daddr)) << 32) | \
+				   ((__force __u64)(__be32)(__saddr)));
+#endif /* __BIG_ENDIAN */
+#define INET_MATCH(__sk, __net, __hash, __cookie, __saddr, __daddr, __ports, __dif)\
+	(((__sk)->sk_hash == (__hash)) && net_eq(sock_net(__sk), (__net)) &&	\
+	 ((*((__addrpair *)&(inet_sk(__sk)->inet_daddr))) == (__cookie))  &&	\
+	 ((*((__portpair *)&(inet_sk(__sk)->inet_dport))) == (__ports))   &&	\
+	 (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif))))
+#define INET_TW_MATCH(__sk, __net, __hash, __cookie, __saddr, __daddr, __ports, __dif)\
+	(((__sk)->sk_hash == (__hash)) && net_eq(sock_net(__sk), (__net)) &&	\
+	 ((*((__addrpair *)&(inet_twsk(__sk)->tw_daddr))) == (__cookie)) &&	\
+	 ((*((__portpair *)&(inet_twsk(__sk)->tw_dport))) == (__ports)) &&	\
+	 (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif))))
+#else /* 32-bit arch */
+#define INET_ADDR_COOKIE(__name, __saddr, __daddr)
+#define INET_MATCH(__sk, __net, __hash, __cookie, __saddr, __daddr, __ports, __dif)	\
+	(((__sk)->sk_hash == (__hash)) && net_eq(sock_net(__sk), (__net))	&&	\
+	 (inet_sk(__sk)->inet_daddr	== (__saddr))		&&	\
+	 (inet_sk(__sk)->inet_rcv_saddr	== (__daddr))		&&	\
+	 ((*((__portpair *)&(inet_sk(__sk)->inet_dport))) == (__ports))	&&	\
+	 (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif))))
+#define INET_TW_MATCH(__sk, __net, __hash,__cookie, __saddr, __daddr, __ports, __dif)	\
+	(((__sk)->sk_hash == (__hash)) && net_eq(sock_net(__sk), (__net))	&&	\
+	 (inet_twsk(__sk)->tw_daddr	== (__saddr))		&&	\
+	 (inet_twsk(__sk)->tw_rcv_saddr	== (__daddr))		&&	\
+	 ((*((__portpair *)&(inet_twsk(__sk)->tw_dport))) == (__ports)) &&	\
+	 (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif))))
+#endif /* 64-bit arch */
+
+/*
+ * Sockets in TCP_CLOSE state are _always_ taken out of the hash, so we need
+ * not check it for lookups anymore, thanks Alexey. -DaveM
+ *
+ * Local BH must be disabled here.
+ */
+extern struct sock * __inet_lookup_established(struct net *net,
+		struct inet_hashinfo *hashinfo,
+		const __be32 saddr, const __be16 sport,
+		const __be32 daddr, const u16 hnum, const int dif);
+
+static inline struct sock *
+	inet_lookup_established(struct net *net, struct inet_hashinfo *hashinfo,
+				const __be32 saddr, const __be16 sport,
+				const __be32 daddr, const __be16 dport,
+				const int dif)
+{
+	return __inet_lookup_established(net, hashinfo, saddr, sport, daddr,
+					 ntohs(dport), dif);
+}
+
+static inline struct sock *__inet_lookup(struct net *net,
+					 struct inet_hashinfo *hashinfo,
+					 const __be32 saddr, const __be16 sport,
+					 const __be32 daddr, const __be16 dport,
+					 const int dif)
+{
+	u16 hnum = ntohs(dport);
+	struct sock *sk = __inet_lookup_established(net, hashinfo,
+				saddr, sport, daddr, hnum, dif);
+
+	return sk ? : __inet_lookup_listener(net, hashinfo, daddr, hnum, dif);
+}
+
+static inline struct sock *inet_lookup(struct net *net,
+				       struct inet_hashinfo *hashinfo,
+				       const __be32 saddr, const __be16 sport,
+				       const __be32 daddr, const __be16 dport,
+				       const int dif)
+{
+	struct sock *sk;
+
+	local_bh_disable();
+	sk = __inet_lookup(net, hashinfo, saddr, sport, daddr, dport, dif);
+	local_bh_enable();
+
+	return sk;
+}
+
+static inline struct sock *__inet_lookup_skb(struct inet_hashinfo *hashinfo,
+					     struct sk_buff *skb,
+					     const __be16 sport,
+					     const __be16 dport)
+{
+	struct sock *sk;
+	const struct iphdr *iph = ip_hdr(skb);
+
+	if (unlikely(sk = skb_steal_sock(skb)))
+		return sk;
+	else
+		return __inet_lookup(dev_net(skb_dst(skb)->dev), hashinfo,
+				     iph->saddr, sport,
+				     iph->daddr, dport, inet_iif(skb));
+}
+
+extern int __inet_hash_connect(struct inet_timewait_death_row *death_row,
+		struct sock *sk,
+		u32 port_offset,
+		int (*check_established)(struct inet_timewait_death_row *,
+			struct sock *, __u16, struct inet_timewait_sock **),
+		int (*hash)(struct sock *sk, struct inet_timewait_sock *twp));
+
+extern int inet_hash_connect(struct inet_timewait_death_row *death_row,
+			     struct sock *sk);
+#endif /* _INET_HASHTABLES_H */
diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h
new file mode 100644
index 00000000..ae17e135
--- /dev/null
+++ b/include/net/inet_sock.h
@@ -0,0 +1,253 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for inet_sock
+ *
+ * Authors:	Many, reorganised here by
+ * 		Arnaldo Carvalho de Melo <acme@mandriva.com>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _INET_SOCK_H
+#define _INET_SOCK_H
+
+
+#include <linux/kmemcheck.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/jhash.h>
+#include <linux/netdevice.h>
+
+#include <net/flow.h>
+#include <net/sock.h>
+#include <net/request_sock.h>
+#include <net/netns/hash.h>
+
+/** struct ip_options - IP Options
+ *
+ * @faddr - Saved first hop address
+ * @nexthop - Saved nexthop address in LSRR and SSRR
+ * @is_data - Options in __data, rather than skb
+ * @is_strictroute - Strict source route
+ * @srr_is_hit - Packet destination addr was our one
+ * @is_changed - IP checksum more not valid
+ * @rr_needaddr - Need to record addr of outgoing dev
+ * @ts_needtime - Need to record timestamp
+ * @ts_needaddr - Need to record addr of outgoing dev
+ */
+struct ip_options {
+	__be32		faddr;
+	__be32		nexthop;
+	unsigned char	optlen;
+	unsigned char	srr;
+	unsigned char	rr;
+	unsigned char	ts;
+	unsigned char	is_strictroute:1,
+			srr_is_hit:1,
+			is_changed:1,
+			rr_needaddr:1,
+			ts_needtime:1,
+			ts_needaddr:1;
+	unsigned char	router_alert;
+	unsigned char	cipso;
+	unsigned char	__pad2;
+	unsigned char	__data[0];
+};
+
+struct ip_options_rcu {
+	struct rcu_head rcu;
+	struct ip_options opt;
+};
+
+struct ip_options_data {
+	struct ip_options_rcu	opt;
+	char			data[40];
+};
+
+struct inet_request_sock {
+	struct request_sock	req;
+#if IS_ENABLED(CONFIG_IPV6)
+	u16			inet6_rsk_offset;
+#endif
+	__be16			loc_port;
+	__be32			loc_addr;
+	__be32			rmt_addr;
+	__be16			rmt_port;
+	kmemcheck_bitfield_begin(flags);
+	u16			snd_wscale : 4,
+				rcv_wscale : 4,
+				tstamp_ok  : 1,
+				sack_ok	   : 1,
+				wscale_ok  : 1,
+				ecn_ok	   : 1,
+				acked	   : 1,
+				no_srccheck: 1;
+	kmemcheck_bitfield_end(flags);
+	struct ip_options_rcu	*opt;
+};
+
+static inline struct inet_request_sock *inet_rsk(const struct request_sock *sk)
+{
+	return (struct inet_request_sock *)sk;
+}
+
+struct inet_cork {
+	unsigned int		flags;
+	__be32			addr;
+	struct ip_options	*opt;
+	unsigned int		fragsize;
+	struct dst_entry	*dst;
+	int			length; /* Total length of all frames */
+	struct page		*page;
+	u32			off;
+	u8			tx_flags;
+};
+
+struct inet_cork_full {
+	struct inet_cork	base;
+	struct flowi		fl;
+};
+
+struct ip_mc_socklist;
+struct ipv6_pinfo;
+struct rtable;
+
+/** struct inet_sock - representation of INET sockets
+ *
+ * @sk - ancestor class
+ * @pinet6 - pointer to IPv6 control block
+ * @inet_daddr - Foreign IPv4 addr
+ * @inet_rcv_saddr - Bound local IPv4 addr
+ * @inet_dport - Destination port
+ * @inet_num - Local port
+ * @inet_saddr - Sending source
+ * @uc_ttl - Unicast TTL
+ * @inet_sport - Source port
+ * @inet_id - ID counter for DF pkts
+ * @tos - TOS
+ * @mc_ttl - Multicasting TTL
+ * @is_icsk - is this an inet_connection_sock?
+ * @uc_index - Unicast outgoing device index
+ * @mc_index - Multicast device index
+ * @mc_list - Group array
+ * @cork - info to build ip hdr on each ip frag while socket is corked
+ */
+struct inet_sock {
+	/* sk and pinet6 has to be the first two members of inet_sock */
+	struct sock		sk;
+#if IS_ENABLED(CONFIG_IPV6)
+	struct ipv6_pinfo	*pinet6;
+#endif
+	/* Socket demultiplex comparisons on incoming packets. */
+#define inet_daddr		sk.__sk_common.skc_daddr
+#define inet_rcv_saddr		sk.__sk_common.skc_rcv_saddr
+
+	__be16			inet_dport;
+	__u16			inet_num;
+	__be32			inet_saddr;
+	__s16			uc_ttl;
+	__u16			cmsg_flags;
+	__be16			inet_sport;
+	__u16			inet_id;
+
+	struct ip_options_rcu __rcu	*inet_opt;
+	__u8			tos;
+	__u8			min_ttl;
+	__u8			mc_ttl;
+	__u8			pmtudisc;
+	__u8			recverr:1,
+				is_icsk:1,
+				freebind:1,
+				hdrincl:1,
+				mc_loop:1,
+				transparent:1,
+				mc_all:1,
+				nodefrag:1;
+	__u8			rcv_tos;
+	int			uc_index;
+	int			mc_index;
+	__be32			mc_addr;
+	struct ip_mc_socklist __rcu	*mc_list;
+	struct inet_cork_full	cork;
+};
+
+#define IPCORK_OPT	1	/* ip-options has been held in ipcork.opt */
+#define IPCORK_ALLFRAG	2	/* always fragment (for ipv6 for now) */
+
+static inline struct inet_sock *inet_sk(const struct sock *sk)
+{
+	return (struct inet_sock *)sk;
+}
+
+static inline void __inet_sk_copy_descendant(struct sock *sk_to,
+					     const struct sock *sk_from,
+					     const int ancestor_size)
+{
+	memcpy(inet_sk(sk_to) + 1, inet_sk(sk_from) + 1,
+	       sk_from->sk_prot->obj_size - ancestor_size);
+}
+#if !(IS_ENABLED(CONFIG_IPV6))
+static inline void inet_sk_copy_descendant(struct sock *sk_to,
+					   const struct sock *sk_from)
+{
+	__inet_sk_copy_descendant(sk_to, sk_from, sizeof(struct inet_sock));
+}
+#endif
+
+extern int inet_sk_rebuild_header(struct sock *sk);
+
+extern u32 inet_ehash_secret;
+extern void build_ehash_secret(void);
+
+static inline unsigned int inet_ehashfn(struct net *net,
+					const __be32 laddr, const __u16 lport,
+					const __be32 faddr, const __be16 fport)
+{
+	return jhash_3words((__force __u32) laddr,
+			    (__force __u32) faddr,
+			    ((__u32) lport) << 16 | (__force __u32)fport,
+			    inet_ehash_secret + net_hash_mix(net));
+}
+
+static inline int inet_sk_ehashfn(const struct sock *sk)
+{
+	const struct inet_sock *inet = inet_sk(sk);
+	const __be32 laddr = inet->inet_rcv_saddr;
+	const __u16 lport = inet->inet_num;
+	const __be32 faddr = inet->inet_daddr;
+	const __be16 fport = inet->inet_dport;
+	struct net *net = sock_net(sk);
+
+	return inet_ehashfn(net, laddr, lport, faddr, fport);
+}
+
+static inline struct request_sock *inet_reqsk_alloc(struct request_sock_ops *ops)
+{
+	struct request_sock *req = reqsk_alloc(ops);
+	struct inet_request_sock *ireq = inet_rsk(req);
+
+	if (req != NULL) {
+		kmemcheck_annotate_bitfield(ireq, flags);
+		ireq->opt = NULL;
+	}
+
+	return req;
+}
+
+static inline __u8 inet_sk_flowi_flags(const struct sock *sk)
+{
+	__u8 flags = 0;
+
+	if (inet_sk(sk)->transparent || inet_sk(sk)->hdrincl)
+		flags |= FLOWI_FLAG_ANYSRC;
+	if (sk->sk_protocol == IPPROTO_TCP)
+		flags |= FLOWI_FLAG_PRECOW_METRICS;
+	return flags;
+}
+
+#endif	/* _INET_SOCK_H */
diff --git a/include/net/inet_timewait_sock.h b/include/net/inet_timewait_sock.h
new file mode 100644
index 00000000..ba52c830
--- /dev/null
+++ b/include/net/inet_timewait_sock.h
@@ -0,0 +1,229 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for a generic INET TIMEWAIT sock
+ *
+ *		From code originally in net/tcp.h
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _INET_TIMEWAIT_SOCK_
+#define _INET_TIMEWAIT_SOCK_
+
+
+#include <linux/kmemcheck.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include <net/inet_sock.h>
+#include <net/sock.h>
+#include <net/tcp_states.h>
+#include <net/timewait_sock.h>
+
+#include <linux/atomic.h>
+
+struct inet_hashinfo;
+
+#define INET_TWDR_RECYCLE_SLOTS_LOG	5
+#define INET_TWDR_RECYCLE_SLOTS		(1 << INET_TWDR_RECYCLE_SLOTS_LOG)
+
+/*
+ * If time > 4sec, it is "slow" path, no recycling is required,
+ * so that we select tick to get range about 4 seconds.
+ */
+#if HZ <= 16 || HZ > 4096
+# error Unsupported: HZ <= 16 or HZ > 4096
+#elif HZ <= 32
+# define INET_TWDR_RECYCLE_TICK (5 + 2 - INET_TWDR_RECYCLE_SLOTS_LOG)
+#elif HZ <= 64
+# define INET_TWDR_RECYCLE_TICK (6 + 2 - INET_TWDR_RECYCLE_SLOTS_LOG)
+#elif HZ <= 128
+# define INET_TWDR_RECYCLE_TICK (7 + 2 - INET_TWDR_RECYCLE_SLOTS_LOG)
+#elif HZ <= 256
+# define INET_TWDR_RECYCLE_TICK (8 + 2 - INET_TWDR_RECYCLE_SLOTS_LOG)
+#elif HZ <= 512
+# define INET_TWDR_RECYCLE_TICK (9 + 2 - INET_TWDR_RECYCLE_SLOTS_LOG)
+#elif HZ <= 1024
+# define INET_TWDR_RECYCLE_TICK (10 + 2 - INET_TWDR_RECYCLE_SLOTS_LOG)
+#elif HZ <= 2048
+# define INET_TWDR_RECYCLE_TICK (11 + 2 - INET_TWDR_RECYCLE_SLOTS_LOG)
+#else
+# define INET_TWDR_RECYCLE_TICK (12 + 2 - INET_TWDR_RECYCLE_SLOTS_LOG)
+#endif
+
+/* TIME_WAIT reaping mechanism. */
+#define INET_TWDR_TWKILL_SLOTS	8 /* Please keep this a power of 2. */
+
+#define INET_TWDR_TWKILL_QUOTA 100
+
+struct inet_timewait_death_row {
+	/* Short-time timewait calendar */
+	int			twcal_hand;
+	unsigned long		twcal_jiffie;
+	struct timer_list	twcal_timer;
+	struct hlist_head	twcal_row[INET_TWDR_RECYCLE_SLOTS];
+
+	spinlock_t		death_lock;
+	int			tw_count;
+	int			period;
+	u32			thread_slots;
+	struct work_struct	twkill_work;
+	struct timer_list	tw_timer;
+	int			slot;
+	struct hlist_head	cells[INET_TWDR_TWKILL_SLOTS];
+	struct inet_hashinfo 	*hashinfo;
+	int			sysctl_tw_recycle;
+	int			sysctl_max_tw_buckets;
+};
+
+extern void inet_twdr_hangman(unsigned long data);
+extern void inet_twdr_twkill_work(struct work_struct *work);
+extern void inet_twdr_twcal_tick(unsigned long data);
+
+struct inet_bind_bucket;
+
+/*
+ * This is a TIME_WAIT sock. It works around the memory consumption
+ * problems of sockets in such a state on heavily loaded servers, but
+ * without violating the protocol specification.
+ */
+struct inet_timewait_sock {
+	/*
+	 * Now struct sock also uses sock_common, so please just
+	 * don't add nothing before this first member (__tw_common) --acme
+	 */
+	struct sock_common	__tw_common;
+#define tw_family		__tw_common.skc_family
+#define tw_state		__tw_common.skc_state
+#define tw_reuse		__tw_common.skc_reuse
+#define tw_bound_dev_if		__tw_common.skc_bound_dev_if
+#define tw_node			__tw_common.skc_nulls_node
+#define tw_bind_node		__tw_common.skc_bind_node
+#define tw_refcnt		__tw_common.skc_refcnt
+#define tw_hash			__tw_common.skc_hash
+#define tw_prot			__tw_common.skc_prot
+#define tw_net			__tw_common.skc_net
+#define tw_daddr        	__tw_common.skc_daddr
+#define tw_rcv_saddr    	__tw_common.skc_rcv_saddr
+	int			tw_timeout;
+	volatile unsigned char	tw_substate;
+	unsigned char		tw_rcv_wscale;
+
+	/* Socket demultiplex comparisons on incoming packets. */
+	/* these three are in inet_sock */
+	__be16			tw_sport;
+	__be16			tw_dport;
+	__u16			tw_num;
+	kmemcheck_bitfield_begin(flags);
+	/* And these are ours. */
+	unsigned int		tw_ipv6only     : 1,
+				tw_transparent  : 1,
+				tw_pad		: 6,	/* 6 bits hole */
+				tw_tos		: 8,
+				tw_ipv6_offset  : 16;
+	kmemcheck_bitfield_end(flags);
+	unsigned long		tw_ttd;
+	struct inet_bind_bucket	*tw_tb;
+	struct hlist_node	tw_death_node;
+};
+#define tw_tclass tw_tos
+
+static inline void inet_twsk_add_node_rcu(struct inet_timewait_sock *tw,
+				      struct hlist_nulls_head *list)
+{
+	hlist_nulls_add_head_rcu(&tw->tw_node, list);
+}
+
+static inline void inet_twsk_add_bind_node(struct inet_timewait_sock *tw,
+					   struct hlist_head *list)
+{
+	hlist_add_head(&tw->tw_bind_node, list);
+}
+
+static inline int inet_twsk_dead_hashed(const struct inet_timewait_sock *tw)
+{
+	return !hlist_unhashed(&tw->tw_death_node);
+}
+
+static inline void inet_twsk_dead_node_init(struct inet_timewait_sock *tw)
+{
+	tw->tw_death_node.pprev = NULL;
+}
+
+static inline void __inet_twsk_del_dead_node(struct inet_timewait_sock *tw)
+{
+	__hlist_del(&tw->tw_death_node);
+	inet_twsk_dead_node_init(tw);
+}
+
+static inline int inet_twsk_del_dead_node(struct inet_timewait_sock *tw)
+{
+	if (inet_twsk_dead_hashed(tw)) {
+		__inet_twsk_del_dead_node(tw);
+		return 1;
+	}
+	return 0;
+}
+
+#define inet_twsk_for_each(tw, node, head) \
+	hlist_nulls_for_each_entry(tw, node, head, tw_node)
+
+#define inet_twsk_for_each_inmate(tw, node, jail) \
+	hlist_for_each_entry(tw, node, jail, tw_death_node)
+
+#define inet_twsk_for_each_inmate_safe(tw, node, safe, jail) \
+	hlist_for_each_entry_safe(tw, node, safe, jail, tw_death_node)
+
+static inline struct inet_timewait_sock *inet_twsk(const struct sock *sk)
+{
+	return (struct inet_timewait_sock *)sk;
+}
+
+static inline __be32 sk_rcv_saddr(const struct sock *sk)
+{
+/* both inet_sk() and inet_twsk() store rcv_saddr in skc_rcv_saddr */
+	return sk->__sk_common.skc_rcv_saddr;
+}
+
+extern void inet_twsk_put(struct inet_timewait_sock *tw);
+
+extern int inet_twsk_unhash(struct inet_timewait_sock *tw);
+
+extern int inet_twsk_bind_unhash(struct inet_timewait_sock *tw,
+				 struct inet_hashinfo *hashinfo);
+
+extern struct inet_timewait_sock *inet_twsk_alloc(const struct sock *sk,
+						  const int state);
+
+extern void __inet_twsk_hashdance(struct inet_timewait_sock *tw,
+				  struct sock *sk,
+				  struct inet_hashinfo *hashinfo);
+
+extern void inet_twsk_schedule(struct inet_timewait_sock *tw,
+			       struct inet_timewait_death_row *twdr,
+			       const int timeo, const int timewait_len);
+extern void inet_twsk_deschedule(struct inet_timewait_sock *tw,
+				 struct inet_timewait_death_row *twdr);
+
+extern void inet_twsk_purge(struct inet_hashinfo *hashinfo,
+			    struct inet_timewait_death_row *twdr, int family);
+
+static inline
+struct net *twsk_net(const struct inet_timewait_sock *twsk)
+{
+	return read_pnet(&twsk->tw_net);
+}
+
+static inline
+void twsk_net_set(struct inet_timewait_sock *twsk, struct net *net)
+{
+	write_pnet(&twsk->tw_net, net);
+}
+#endif	/* _INET_TIMEWAIT_SOCK_ */
diff --git a/include/net/inetpeer.h b/include/net/inetpeer.h
new file mode 100644
index 00000000..2040bff9
--- /dev/null
+++ b/include/net/inetpeer.h
@@ -0,0 +1,129 @@
+/*
+ *		INETPEER - A storage for permanent information about peers
+ *
+ *  Authors:	Andrey V. Savochkin <saw@msu.ru>
+ */
+
+#ifndef _NET_INETPEER_H
+#define _NET_INETPEER_H
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/spinlock.h>
+#include <linux/rtnetlink.h>
+#include <net/ipv6.h>
+#include <linux/atomic.h>
+
+struct inetpeer_addr_base {
+	union {
+		__be32			a4;
+		__be32			a6[4];
+	};
+};
+
+struct inetpeer_addr {
+	struct inetpeer_addr_base	addr;
+	__u16				family;
+};
+
+struct inet_peer {
+	/* group together avl_left,avl_right,v4daddr to speedup lookups */
+	struct inet_peer __rcu	*avl_left, *avl_right;
+	struct inetpeer_addr	daddr;
+	__u32			avl_height;
+
+	u32			metrics[RTAX_MAX];
+	u32			rate_tokens;	/* rate limiting for ICMP */
+	unsigned long		rate_last;
+	unsigned long		pmtu_expires;
+	u32			pmtu_orig;
+	u32			pmtu_learned;
+	struct inetpeer_addr_base redirect_learned;
+	union {
+		struct list_head	gc_list;
+		struct rcu_head     gc_rcu;
+	};
+	/*
+	 * Once inet_peer is queued for deletion (refcnt == -1), following fields
+	 * are not available: rid, ip_id_count, tcp_ts, tcp_ts_stamp
+	 * We can share memory with rcu_head to help keep inet_peer small.
+	 */
+	union {
+		struct {
+			atomic_t			rid;		/* Frag reception counter */
+			atomic_t			ip_id_count;	/* IP ID for the next packet */
+			__u32				tcp_ts;
+			__u32				tcp_ts_stamp;
+		};
+		struct rcu_head         rcu;
+		struct inet_peer	*gc_next;
+	};
+
+	/* following fields might be frequently dirtied */
+	__u32			dtime;	/* the time of last use of not referenced entries */
+	atomic_t		refcnt;
+};
+
+void			inet_initpeers(void) __init;
+
+#define INETPEER_METRICS_NEW	(~(u32) 0)
+
+static inline bool inet_metrics_new(const struct inet_peer *p)
+{
+	return p->metrics[RTAX_LOCK-1] == INETPEER_METRICS_NEW;
+}
+
+/* can be called with or without local BH being disabled */
+struct inet_peer	*inet_getpeer(const struct inetpeer_addr *daddr, int create);
+
+static inline struct inet_peer *inet_getpeer_v4(__be32 v4daddr, int create)
+{
+	struct inetpeer_addr daddr;
+
+	daddr.addr.a4 = v4daddr;
+	daddr.family = AF_INET;
+	return inet_getpeer(&daddr, create);
+}
+
+static inline struct inet_peer *inet_getpeer_v6(const struct in6_addr *v6daddr, int create)
+{
+	struct inetpeer_addr daddr;
+
+	*(struct in6_addr *)daddr.addr.a6 = *v6daddr;
+	daddr.family = AF_INET6;
+	return inet_getpeer(&daddr, create);
+}
+
+/* can be called from BH context or outside */
+extern void inet_putpeer(struct inet_peer *p);
+extern bool inet_peer_xrlim_allow(struct inet_peer *peer, int timeout);
+
+extern void inetpeer_invalidate_tree(int family);
+
+/*
+ * temporary check to make sure we dont access rid, ip_id_count, tcp_ts,
+ * tcp_ts_stamp if no refcount is taken on inet_peer
+ */
+static inline void inet_peer_refcheck(const struct inet_peer *p)
+{
+	WARN_ON_ONCE(atomic_read(&p->refcnt) <= 0);
+}
+
+
+/* can be called with or without local BH being disabled */
+static inline int inet_getid(struct inet_peer *p, int more)
+{
+	int old, new;
+	more++;
+	inet_peer_refcheck(p);
+	do {
+		old = atomic_read(&p->ip_id_count);
+		new = old + more;
+		if (!new)
+			new = 1;
+	} while (atomic_cmpxchg(&p->ip_id_count, old, new) != old);
+	return new;
+}
+
+#endif /* _NET_INETPEER_H */
diff --git a/include/net/ip.h b/include/net/ip.h
new file mode 100644
index 00000000..b53d65f2
--- /dev/null
+++ b/include/net/ip.h
@@ -0,0 +1,475 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the IP module.
+ *
+ * Version:	@(#)ip.h	1.0.2	05/07/93
+ *
+ * Authors:	Ross Biro
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Alan Cox, <gw4pts@gw4pts.ampr.org>
+ *
+ * Changes:
+ *		Mike McLagan    :       Routing by source
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _IP_H
+#define _IP_H
+
+#include <linux/types.h>
+#include <linux/ip.h>
+#include <linux/in.h>
+#include <linux/skbuff.h>
+
+#include <net/inet_sock.h>
+#include <net/snmp.h>
+#include <net/flow.h>
+
+struct sock;
+
+struct inet_skb_parm {
+	struct ip_options	opt;		/* Compiled IP options		*/
+	unsigned char		flags;
+
+#define IPSKB_FORWARDED		1
+#define IPSKB_XFRM_TUNNEL_SIZE	2
+#define IPSKB_XFRM_TRANSFORMED	4
+#define IPSKB_FRAG_COMPLETE	8
+#define IPSKB_REROUTED		16
+};
+
+static inline unsigned int ip_hdrlen(const struct sk_buff *skb)
+{
+	return ip_hdr(skb)->ihl * 4;
+}
+
+struct ipcm_cookie {
+	__be32			addr;
+	int			oif;
+	struct ip_options_rcu	*opt;
+	__u8			tx_flags;
+};
+
+#define IPCB(skb) ((struct inet_skb_parm*)((skb)->cb))
+
+struct ip_ra_chain {
+	struct ip_ra_chain __rcu *next;
+	struct sock		*sk;
+	union {
+		void			(*destructor)(struct sock *);
+		struct sock		*saved_sk;
+	};
+	struct rcu_head		rcu;
+};
+
+extern struct ip_ra_chain __rcu *ip_ra_chain;
+
+/* IP flags. */
+#define IP_CE		0x8000		/* Flag: "Congestion"		*/
+#define IP_DF		0x4000		/* Flag: "Don't Fragment"	*/
+#define IP_MF		0x2000		/* Flag: "More Fragments"	*/
+#define IP_OFFSET	0x1FFF		/* "Fragment Offset" part	*/
+
+#define IP_FRAG_TIME	(30 * HZ)		/* fragment lifetime	*/
+
+struct msghdr;
+struct net_device;
+struct packet_type;
+struct rtable;
+struct sockaddr;
+
+extern int		igmp_mc_proc_init(void);
+
+/*
+ *	Functions provided by ip.c
+ */
+
+extern int		ip_build_and_send_pkt(struct sk_buff *skb, struct sock *sk,
+					      __be32 saddr, __be32 daddr,
+					      struct ip_options_rcu *opt);
+extern int		ip_rcv(struct sk_buff *skb, struct net_device *dev,
+			       struct packet_type *pt, struct net_device *orig_dev);
+extern int		ip_local_deliver(struct sk_buff *skb);
+extern int		ip_mr_input(struct sk_buff *skb);
+extern int		ip_output(struct sk_buff *skb);
+extern int		ip_mc_output(struct sk_buff *skb);
+extern int		ip_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *));
+extern int		ip_do_nat(struct sk_buff *skb);
+extern void		ip_send_check(struct iphdr *ip);
+extern int		__ip_local_out(struct sk_buff *skb);
+extern int		ip_local_out(struct sk_buff *skb);
+extern int		ip_queue_xmit(struct sk_buff *skb, struct flowi *fl);
+extern void		ip_init(void);
+extern int		ip_append_data(struct sock *sk, struct flowi4 *fl4,
+				       int getfrag(void *from, char *to, int offset, int len,
+						   int odd, struct sk_buff *skb),
+				void *from, int len, int protolen,
+				struct ipcm_cookie *ipc,
+				struct rtable **rt,
+				unsigned int flags);
+extern int		ip_generic_getfrag(void *from, char *to, int offset, int len, int odd, struct sk_buff *skb);
+extern ssize_t		ip_append_page(struct sock *sk, struct flowi4 *fl4, struct page *page,
+				int offset, size_t size, int flags);
+extern struct sk_buff  *__ip_make_skb(struct sock *sk,
+				      struct flowi4 *fl4,
+				      struct sk_buff_head *queue,
+				      struct inet_cork *cork);
+extern int		ip_send_skb(struct sk_buff *skb);
+extern int		ip_push_pending_frames(struct sock *sk, struct flowi4 *fl4);
+extern void		ip_flush_pending_frames(struct sock *sk);
+extern struct sk_buff  *ip_make_skb(struct sock *sk,
+				    struct flowi4 *fl4,
+				    int getfrag(void *from, char *to, int offset, int len,
+						int odd, struct sk_buff *skb),
+				    void *from, int length, int transhdrlen,
+				    struct ipcm_cookie *ipc,
+				    struct rtable **rtp,
+				    unsigned int flags);
+
+static inline struct sk_buff *ip_finish_skb(struct sock *sk, struct flowi4 *fl4)
+{
+	return __ip_make_skb(sk, fl4, &sk->sk_write_queue, &inet_sk(sk)->cork.base);
+}
+
+/* datagram.c */
+extern int		ip4_datagram_connect(struct sock *sk, 
+					     struct sockaddr *uaddr, int addr_len);
+
+/*
+ *	Map a multicast IP onto multicast MAC for type Token Ring.
+ *      This conforms to RFC1469 Option 2 Multicasting i.e.
+ *      using a functional address to transmit / receive 
+ *      multicast packets.
+ */
+
+static inline void ip_tr_mc_map(__be32 addr, char *buf)
+{
+	buf[0]=0xC0;
+	buf[1]=0x00;
+	buf[2]=0x00;
+	buf[3]=0x04;
+	buf[4]=0x00;
+	buf[5]=0x00;
+}
+
+struct ip_reply_arg {
+	struct kvec iov[1];   
+	int	    flags;
+	__wsum 	    csum;
+	int	    csumoffset; /* u16 offset of csum in iov[0].iov_base */
+				/* -1 if not needed */ 
+	int	    bound_dev_if;
+	u8  	    tos;
+}; 
+
+#define IP_REPLY_ARG_NOSRCCHECK 1
+
+static inline __u8 ip_reply_arg_flowi_flags(const struct ip_reply_arg *arg)
+{
+	return (arg->flags & IP_REPLY_ARG_NOSRCCHECK) ? FLOWI_FLAG_ANYSRC : 0;
+}
+
+void ip_send_reply(struct sock *sk, struct sk_buff *skb, __be32 daddr,
+		   const struct ip_reply_arg *arg, unsigned int len);
+
+struct ipv4_config {
+	int	log_martians;
+	int	no_pmtu_disc;
+};
+
+extern struct ipv4_config ipv4_config;
+#define IP_INC_STATS(net, field)	SNMP_INC_STATS64((net)->mib.ip_statistics, field)
+#define IP_INC_STATS_BH(net, field)	SNMP_INC_STATS64_BH((net)->mib.ip_statistics, field)
+#define IP_ADD_STATS(net, field, val)	SNMP_ADD_STATS64((net)->mib.ip_statistics, field, val)
+#define IP_ADD_STATS_BH(net, field, val) SNMP_ADD_STATS64_BH((net)->mib.ip_statistics, field, val)
+#define IP_UPD_PO_STATS(net, field, val) SNMP_UPD_PO_STATS64((net)->mib.ip_statistics, field, val)
+#define IP_UPD_PO_STATS_BH(net, field, val) SNMP_UPD_PO_STATS64_BH((net)->mib.ip_statistics, field, val)
+#define NET_INC_STATS(net, field)	SNMP_INC_STATS((net)->mib.net_statistics, field)
+#define NET_INC_STATS_BH(net, field)	SNMP_INC_STATS_BH((net)->mib.net_statistics, field)
+#define NET_INC_STATS_USER(net, field) 	SNMP_INC_STATS_USER((net)->mib.net_statistics, field)
+#define NET_ADD_STATS_BH(net, field, adnd) SNMP_ADD_STATS_BH((net)->mib.net_statistics, field, adnd)
+#define NET_ADD_STATS_USER(net, field, adnd) SNMP_ADD_STATS_USER((net)->mib.net_statistics, field, adnd)
+
+extern unsigned long snmp_fold_field(void __percpu *mib[], int offt);
+#if BITS_PER_LONG==32
+extern u64 snmp_fold_field64(void __percpu *mib[], int offt, size_t sync_off);
+#else
+static inline u64 snmp_fold_field64(void __percpu *mib[], int offt, size_t syncp_off)
+{
+	return snmp_fold_field(mib, offt);
+}
+#endif
+extern int snmp_mib_init(void __percpu *ptr[2], size_t mibsize, size_t align);
+extern void snmp_mib_free(void __percpu *ptr[2]);
+
+extern struct local_ports {
+	seqlock_t	lock;
+	int		range[2];
+} sysctl_local_ports;
+extern void inet_get_local_port_range(int *low, int *high);
+
+extern unsigned long *sysctl_local_reserved_ports;
+static inline int inet_is_reserved_local_port(int port)
+{
+	return test_bit(port, sysctl_local_reserved_ports);
+}
+
+extern int sysctl_ip_nonlocal_bind;
+
+extern struct ctl_path net_core_path[];
+extern struct ctl_path net_ipv4_ctl_path[];
+
+/* From inetpeer.c */
+extern int inet_peer_threshold;
+extern int inet_peer_minttl;
+extern int inet_peer_maxttl;
+
+/* From ip_output.c */
+extern int sysctl_ip_dynaddr;
+
+extern void ipfrag_init(void);
+
+extern void ip_static_sysctl_init(void);
+
+static inline bool ip_is_fragment(const struct iphdr *iph)
+{
+	return (iph->frag_off & htons(IP_MF | IP_OFFSET)) != 0;
+}
+
+#ifdef CONFIG_INET
+#include <net/dst.h>
+
+/* The function in 2.2 was invalid, producing wrong result for
+ * check=0xFEFF. It was noticed by Arthur Skawina _year_ ago. --ANK(000625) */
+static inline
+int ip_decrease_ttl(struct iphdr *iph)
+{
+	u32 check = (__force u32)iph->check;
+	check += (__force u32)htons(0x0100);
+	iph->check = (__force __sum16)(check + (check>=0xFFFF));
+	return --iph->ttl;
+}
+
+static inline
+int ip_dont_fragment(struct sock *sk, struct dst_entry *dst)
+{
+	return  inet_sk(sk)->pmtudisc == IP_PMTUDISC_DO ||
+		(inet_sk(sk)->pmtudisc == IP_PMTUDISC_WANT &&
+		 !(dst_metric_locked(dst, RTAX_MTU)));
+}
+
+extern void __ip_select_ident(struct iphdr *iph, struct dst_entry *dst, int more);
+
+static inline void ip_select_ident(struct iphdr *iph, struct dst_entry *dst, struct sock *sk)
+{
+	if (iph->frag_off & htons(IP_DF)) {
+		/* This is only to work around buggy Windows95/2000
+		 * VJ compression implementations.  If the ID field
+		 * does not change, they drop every other packet in
+		 * a TCP stream using header compression.
+		 */
+		iph->id = (sk && inet_sk(sk)->inet_daddr) ?
+					htons(inet_sk(sk)->inet_id++) : 0;
+	} else
+		__ip_select_ident(iph, dst, 0);
+}
+
+static inline void ip_select_ident_more(struct iphdr *iph, struct dst_entry *dst, struct sock *sk, int more)
+{
+	if (iph->frag_off & htons(IP_DF)) {
+		if (sk && inet_sk(sk)->inet_daddr) {
+			iph->id = htons(inet_sk(sk)->inet_id);
+			inet_sk(sk)->inet_id += 1 + more;
+		} else
+			iph->id = 0;
+	} else
+		__ip_select_ident(iph, dst, more);
+}
+
+/*
+ *	Map a multicast IP onto multicast MAC for type ethernet.
+ */
+
+static inline void ip_eth_mc_map(__be32 naddr, char *buf)
+{
+	__u32 addr=ntohl(naddr);
+	buf[0]=0x01;
+	buf[1]=0x00;
+	buf[2]=0x5e;
+	buf[5]=addr&0xFF;
+	addr>>=8;
+	buf[4]=addr&0xFF;
+	addr>>=8;
+	buf[3]=addr&0x7F;
+}
+
+/*
+ *	Map a multicast IP onto multicast MAC for type IP-over-InfiniBand.
+ *	Leave P_Key as 0 to be filled in by driver.
+ */
+
+static inline void ip_ib_mc_map(__be32 naddr, const unsigned char *broadcast, char *buf)
+{
+	__u32 addr;
+	unsigned char scope = broadcast[5] & 0xF;
+
+	buf[0]  = 0;		/* Reserved */
+	buf[1]  = 0xff;		/* Multicast QPN */
+	buf[2]  = 0xff;
+	buf[3]  = 0xff;
+	addr    = ntohl(naddr);
+	buf[4]  = 0xff;
+	buf[5]  = 0x10 | scope;	/* scope from broadcast address */
+	buf[6]  = 0x40;		/* IPv4 signature */
+	buf[7]  = 0x1b;
+	buf[8]  = broadcast[8];		/* P_Key */
+	buf[9]  = broadcast[9];
+	buf[10] = 0;
+	buf[11] = 0;
+	buf[12] = 0;
+	buf[13] = 0;
+	buf[14] = 0;
+	buf[15] = 0;
+	buf[19] = addr & 0xff;
+	addr  >>= 8;
+	buf[18] = addr & 0xff;
+	addr  >>= 8;
+	buf[17] = addr & 0xff;
+	addr  >>= 8;
+	buf[16] = addr & 0x0f;
+}
+
+static inline void ip_ipgre_mc_map(__be32 naddr, const unsigned char *broadcast, char *buf)
+{
+	if ((broadcast[0] | broadcast[1] | broadcast[2] | broadcast[3]) != 0)
+		memcpy(buf, broadcast, 4);
+	else
+		memcpy(buf, &naddr, sizeof(naddr));
+}
+
+#if IS_ENABLED(CONFIG_IPV6)
+#include <linux/ipv6.h>
+#endif
+
+static __inline__ void inet_reset_saddr(struct sock *sk)
+{
+	inet_sk(sk)->inet_rcv_saddr = inet_sk(sk)->inet_saddr = 0;
+#if IS_ENABLED(CONFIG_IPV6)
+	if (sk->sk_family == PF_INET6) {
+		struct ipv6_pinfo *np = inet6_sk(sk);
+
+		memset(&np->saddr, 0, sizeof(np->saddr));
+		memset(&np->rcv_saddr, 0, sizeof(np->rcv_saddr));
+	}
+#endif
+}
+
+#endif
+
+static inline int sk_mc_loop(struct sock *sk)
+{
+	if (!sk)
+		return 1;
+	switch (sk->sk_family) {
+	case AF_INET:
+		return inet_sk(sk)->mc_loop;
+#if IS_ENABLED(CONFIG_IPV6)
+	case AF_INET6:
+		return inet6_sk(sk)->mc_loop;
+#endif
+	}
+	WARN_ON(1);
+	return 1;
+}
+
+extern bool ip_call_ra_chain(struct sk_buff *skb);
+
+/*
+ *	Functions provided by ip_fragment.c
+ */
+
+enum ip_defrag_users {
+	IP_DEFRAG_LOCAL_DELIVER,
+	IP_DEFRAG_CALL_RA_CHAIN,
+	IP_DEFRAG_CONNTRACK_IN,
+	__IP_DEFRAG_CONNTRACK_IN_END	= IP_DEFRAG_CONNTRACK_IN + USHRT_MAX,
+	IP_DEFRAG_CONNTRACK_OUT,
+	__IP_DEFRAG_CONNTRACK_OUT_END	= IP_DEFRAG_CONNTRACK_OUT + USHRT_MAX,
+	IP_DEFRAG_CONNTRACK_BRIDGE_IN,
+	__IP_DEFRAG_CONNTRACK_BRIDGE_IN = IP_DEFRAG_CONNTRACK_BRIDGE_IN + USHRT_MAX,
+	IP_DEFRAG_VS_IN,
+	IP_DEFRAG_VS_OUT,
+	IP_DEFRAG_VS_FWD,
+	IP_DEFRAG_AF_PACKET,
+	IP_DEFRAG_MACVLAN,
+};
+
+int ip_defrag(struct sk_buff *skb, u32 user);
+#ifdef CONFIG_INET
+struct sk_buff *ip_check_defrag(struct sk_buff *skb, u32 user);
+#else
+static inline struct sk_buff *ip_check_defrag(struct sk_buff *skb, u32 user)
+{
+	return skb;
+}
+#endif
+int ip_frag_mem(struct net *net);
+int ip_frag_nqueues(struct net *net);
+
+/*
+ *	Functions provided by ip_forward.c
+ */
+ 
+extern int ip_forward(struct sk_buff *skb);
+ 
+/*
+ *	Functions provided by ip_options.c
+ */
+ 
+extern void ip_options_build(struct sk_buff *skb, struct ip_options *opt,
+			     __be32 daddr, struct rtable *rt, int is_frag);
+extern int ip_options_echo(struct ip_options *dopt, struct sk_buff *skb);
+extern void ip_options_fragment(struct sk_buff *skb);
+extern int ip_options_compile(struct net *net,
+			      struct ip_options *opt, struct sk_buff *skb);
+extern int ip_options_get(struct net *net, struct ip_options_rcu **optp,
+			  unsigned char *data, int optlen);
+extern int ip_options_get_from_user(struct net *net, struct ip_options_rcu **optp,
+				    unsigned char __user *data, int optlen);
+extern void ip_options_undo(struct ip_options * opt);
+extern void ip_forward_options(struct sk_buff *skb);
+extern int ip_options_rcv_srr(struct sk_buff *skb);
+
+/*
+ *	Functions provided by ip_sockglue.c
+ */
+
+extern void	ipv4_pktinfo_prepare(struct sk_buff *skb);
+extern void	ip_cmsg_recv(struct msghdr *msg, struct sk_buff *skb);
+extern int	ip_cmsg_send(struct net *net,
+			     struct msghdr *msg, struct ipcm_cookie *ipc);
+extern int	ip_setsockopt(struct sock *sk, int level, int optname, char __user *optval, unsigned int optlen);
+extern int	ip_getsockopt(struct sock *sk, int level, int optname, char __user *optval, int __user *optlen);
+extern int	compat_ip_setsockopt(struct sock *sk, int level,
+			int optname, char __user *optval, unsigned int optlen);
+extern int	compat_ip_getsockopt(struct sock *sk, int level,
+			int optname, char __user *optval, int __user *optlen);
+extern int	ip_ra_control(struct sock *sk, unsigned char on, void (*destructor)(struct sock *));
+
+extern int 	ip_recv_error(struct sock *sk, struct msghdr *msg, int len);
+extern void	ip_icmp_error(struct sock *sk, struct sk_buff *skb, int err, 
+			      __be16 port, u32 info, u8 *payload);
+extern void	ip_local_error(struct sock *sk, int err, __be32 daddr, __be16 dport,
+			       u32 info);
+
+#ifdef CONFIG_PROC_FS
+extern int ip_misc_proc_init(void);
+#endif
+
+#endif	/* _IP_H */
diff --git a/include/net/ip6_checksum.h b/include/net/ip6_checksum.h
new file mode 100644
index 00000000..bc1b0fda
--- /dev/null
+++ b/include/net/ip6_checksum.h
@@ -0,0 +1,94 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Checksumming functions for IPv6
+ *
+ * Authors:	Jorge Cwik, <jorge@laser.satlink.net>
+ *		Arnt Gulbrandsen, <agulbra@nvg.unit.no>
+ *		Borrows very liberally from tcp.c and ip.c, see those
+ *		files for more names.
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+/*
+ *	Fixes:
+ *
+ *	Ralf Baechle			:	generic ipv6 checksum
+ *	<ralf@waldorf-gmbh.de>
+ */
+
+#ifndef _CHECKSUM_IPV6_H
+#define _CHECKSUM_IPV6_H
+
+#include <asm/types.h>
+#include <asm/byteorder.h>
+#include <net/ip.h>
+#include <asm/checksum.h>
+#include <linux/in6.h>
+
+#ifndef _HAVE_ARCH_IPV6_CSUM
+
+static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+					  const struct in6_addr *daddr,
+					  __u32 len, unsigned short proto,
+					  __wsum csum)
+{
+
+	int carry;
+	__u32 ulen;
+	__u32 uproto;
+	__u32 sum = (__force u32)csum;
+
+	sum += (__force u32)saddr->s6_addr32[0];
+	carry = (sum < (__force u32)saddr->s6_addr32[0]);
+	sum += carry;
+
+	sum += (__force u32)saddr->s6_addr32[1];
+	carry = (sum < (__force u32)saddr->s6_addr32[1]);
+	sum += carry;
+
+	sum += (__force u32)saddr->s6_addr32[2];
+	carry = (sum < (__force u32)saddr->s6_addr32[2]);
+	sum += carry;
+
+	sum += (__force u32)saddr->s6_addr32[3];
+	carry = (sum < (__force u32)saddr->s6_addr32[3]);
+	sum += carry;
+
+	sum += (__force u32)daddr->s6_addr32[0];
+	carry = (sum < (__force u32)daddr->s6_addr32[0]);
+	sum += carry;
+
+	sum += (__force u32)daddr->s6_addr32[1];
+	carry = (sum < (__force u32)daddr->s6_addr32[1]);
+	sum += carry;
+
+	sum += (__force u32)daddr->s6_addr32[2];
+	carry = (sum < (__force u32)daddr->s6_addr32[2]);
+	sum += carry;
+
+	sum += (__force u32)daddr->s6_addr32[3];
+	carry = (sum < (__force u32)daddr->s6_addr32[3]);
+	sum += carry;
+
+	ulen = (__force u32)htonl((__u32) len);
+	sum += ulen;
+	carry = (sum < ulen);
+	sum += carry;
+
+	uproto = (__force u32)htonl(proto);
+	sum += uproto;
+	carry = (sum < uproto);
+	sum += carry;
+
+	return csum_fold((__force __wsum)sum);
+}
+
+#endif
+#endif
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
new file mode 100644
index 00000000..0ae759a6
--- /dev/null
+++ b/include/net/ip6_fib.h
@@ -0,0 +1,288 @@
+/*
+ *	Linux INET6 implementation 
+ *
+ *	Authors:
+ *	Pedro Roque		<roque@di.fc.ul.pt>	
+ *
+ *	This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _IP6_FIB_H
+#define _IP6_FIB_H
+
+#include <linux/ipv6_route.h>
+#include <linux/rtnetlink.h>
+#include <linux/spinlock.h>
+#include <net/dst.h>
+#include <net/flow.h>
+#include <net/netlink.h>
+#include <net/inetpeer.h>
+
+#ifdef CONFIG_IPV6_MULTIPLE_TABLES
+#define FIB6_TABLE_HASHSZ 256
+#else
+#define FIB6_TABLE_HASHSZ 1
+#endif
+
+struct rt6_info;
+
+struct fib6_config {
+	u32		fc_table;
+	u32		fc_metric;
+	int		fc_dst_len;
+	int		fc_src_len;
+	int		fc_ifindex;
+	u32		fc_flags;
+	u32		fc_protocol;
+
+	struct in6_addr	fc_dst;
+	struct in6_addr	fc_src;
+	struct in6_addr	fc_prefsrc;
+	struct in6_addr	fc_gateway;
+
+	unsigned long	fc_expires;
+	struct nlattr	*fc_mx;
+	int		fc_mx_len;
+
+	struct nl_info	fc_nlinfo;
+};
+
+struct fib6_node {
+	struct fib6_node	*parent;
+	struct fib6_node	*left;
+	struct fib6_node	*right;
+#ifdef CONFIG_IPV6_SUBTREES
+	struct fib6_node	*subtree;
+#endif
+	struct rt6_info		*leaf;
+
+	__u16			fn_bit;		/* bit key */
+	__u16			fn_flags;
+	__u32			fn_sernum;
+	struct rt6_info		*rr_ptr;
+};
+
+#ifndef CONFIG_IPV6_SUBTREES
+#define FIB6_SUBTREE(fn)	NULL
+#else
+#define FIB6_SUBTREE(fn)	((fn)->subtree)
+#endif
+
+/*
+ *	routing information
+ *
+ */
+
+struct rt6key {
+	struct in6_addr	addr;
+	int		plen;
+};
+
+struct fib6_table;
+
+struct rt6_info {
+	struct dst_entry		dst;
+
+	/*
+	 * Tail elements of dst_entry (__refcnt etc.)
+	 * and these elements (rarely used in hot path) are in
+	 * the same cache line.
+	 */
+	struct fib6_table		*rt6i_table;
+	struct fib6_node		*rt6i_node;
+
+	struct in6_addr			rt6i_gateway;
+
+	atomic_t			rt6i_ref;
+
+	/* These are in a separate cache line. */
+	struct rt6key			rt6i_dst ____cacheline_aligned_in_smp;
+	u32				rt6i_flags;
+	struct rt6key			rt6i_src;
+	struct rt6key			rt6i_prefsrc;
+	u32				rt6i_metric;
+	u32				rt6i_peer_genid;
+
+	struct inet6_dev		*rt6i_idev;
+	struct inet_peer		*rt6i_peer;
+
+#ifdef CONFIG_XFRM
+	u32				rt6i_flow_cache_genid;
+#endif
+	/* more non-fragment space at head required */
+	unsigned short			rt6i_nfheader_len;
+
+	u8				rt6i_protocol;
+};
+
+static inline struct inet6_dev *ip6_dst_idev(struct dst_entry *dst)
+{
+	return ((struct rt6_info *)dst)->rt6i_idev;
+}
+
+static inline void rt6_clean_expires(struct rt6_info *rt)
+{
+	if (!(rt->rt6i_flags & RTF_EXPIRES) && rt->dst.from)
+		dst_release(rt->dst.from);
+
+	rt->rt6i_flags &= ~RTF_EXPIRES;
+	rt->dst.from = NULL;
+}
+
+static inline void rt6_set_expires(struct rt6_info *rt, unsigned long expires)
+{
+	if (!(rt->rt6i_flags & RTF_EXPIRES) && rt->dst.from)
+		dst_release(rt->dst.from);
+
+	rt->rt6i_flags |= RTF_EXPIRES;
+	rt->dst.expires = expires;
+}
+
+static inline void rt6_update_expires(struct rt6_info *rt, int timeout)
+{
+	if (!(rt->rt6i_flags & RTF_EXPIRES)) {
+		if (rt->dst.from)
+			dst_release(rt->dst.from);
+		/* dst_set_expires relies on expires == 0 
+		 * if it has not been set previously.
+		 */
+		rt->dst.expires = 0;
+	}
+
+	dst_set_expires(&rt->dst, timeout);
+	rt->rt6i_flags |= RTF_EXPIRES;
+}
+
+static inline void rt6_set_from(struct rt6_info *rt, struct rt6_info *from)
+{
+	struct dst_entry *new = (struct dst_entry *) from;
+
+	if (!(rt->rt6i_flags & RTF_EXPIRES) && rt->dst.from) {
+		if (new == rt->dst.from)
+			return;
+		dst_release(rt->dst.from);
+	}
+
+	rt->rt6i_flags &= ~RTF_EXPIRES;
+	rt->dst.from = new;
+	dst_hold(new);
+}
+
+struct fib6_walker_t {
+	struct list_head lh;
+	struct fib6_node *root, *node;
+	struct rt6_info *leaf;
+	unsigned char state;
+	unsigned char prune;
+	unsigned int skip;
+	unsigned int count;
+	int (*func)(struct fib6_walker_t *);
+	void *args;
+};
+
+struct rt6_statistics {
+	__u32		fib_nodes;
+	__u32		fib_route_nodes;
+	__u32		fib_rt_alloc;		/* permanent routes	*/
+	__u32		fib_rt_entries;		/* rt entries in table	*/
+	__u32		fib_rt_cache;		/* cache routes		*/
+	__u32		fib_discarded_routes;
+};
+
+#define RTN_TL_ROOT	0x0001
+#define RTN_ROOT	0x0002		/* tree root node		*/
+#define RTN_RTINFO	0x0004		/* node with valid routing info	*/
+
+/*
+ *	priority levels (or metrics)
+ *
+ */
+
+
+struct fib6_table {
+	struct hlist_node	tb6_hlist;
+	u32			tb6_id;
+	rwlock_t		tb6_lock;
+	struct fib6_node	tb6_root;
+};
+
+#define RT6_TABLE_UNSPEC	RT_TABLE_UNSPEC
+#define RT6_TABLE_MAIN		RT_TABLE_MAIN
+#define RT6_TABLE_DFLT		RT6_TABLE_MAIN
+#define RT6_TABLE_INFO		RT6_TABLE_MAIN
+#define RT6_TABLE_PREFIX	RT6_TABLE_MAIN
+
+#ifdef CONFIG_IPV6_MULTIPLE_TABLES
+#define FIB6_TABLE_MIN		1
+#define FIB6_TABLE_MAX		RT_TABLE_MAX
+#define RT6_TABLE_LOCAL		RT_TABLE_LOCAL
+#else
+#define FIB6_TABLE_MIN		RT_TABLE_MAIN
+#define FIB6_TABLE_MAX		FIB6_TABLE_MIN
+#define RT6_TABLE_LOCAL		RT6_TABLE_MAIN
+#endif
+
+typedef struct rt6_info *(*pol_lookup_t)(struct net *,
+					 struct fib6_table *,
+					 struct flowi6 *, int);
+
+/*
+ *	exported functions
+ */
+
+extern struct fib6_table        *fib6_get_table(struct net *net, u32 id);
+extern struct fib6_table        *fib6_new_table(struct net *net, u32 id);
+extern struct dst_entry         *fib6_rule_lookup(struct net *net,
+						  struct flowi6 *fl6, int flags,
+						  pol_lookup_t lookup);
+
+extern struct fib6_node		*fib6_lookup(struct fib6_node *root,
+					     const struct in6_addr *daddr,
+					     const struct in6_addr *saddr);
+
+struct fib6_node		*fib6_locate(struct fib6_node *root,
+					     const struct in6_addr *daddr, int dst_len,
+					     const struct in6_addr *saddr, int src_len);
+
+extern void			fib6_clean_all_ro(struct net *net,
+					       int (*func)(struct rt6_info *, void *arg),
+					       int prune, void *arg);
+
+extern void			fib6_clean_all(struct net *net,
+					       int (*func)(struct rt6_info *, void *arg),
+					       int prune, void *arg);
+
+extern int			fib6_add(struct fib6_node *root,
+					 struct rt6_info *rt,
+					 struct nl_info *info);
+
+extern int			fib6_del(struct rt6_info *rt,
+					 struct nl_info *info);
+
+extern void			inet6_rt_notify(int event, struct rt6_info *rt,
+						struct nl_info *info);
+
+extern void			fib6_run_gc(unsigned long expires,
+					    struct net *net);
+
+extern void			fib6_gc_cleanup(void);
+
+extern int			fib6_init(void);
+
+#ifdef CONFIG_IPV6_MULTIPLE_TABLES
+extern int			fib6_rules_init(void);
+extern void			fib6_rules_cleanup(void);
+#else
+static inline int               fib6_rules_init(void)
+{
+	return 0;
+}
+static inline void              fib6_rules_cleanup(void)
+{
+	return ;
+}
+#endif
+#endif
diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h
new file mode 100644
index 00000000..2ad92ca4
--- /dev/null
+++ b/include/net/ip6_route.h
@@ -0,0 +1,195 @@
+#ifndef _NET_IP6_ROUTE_H
+#define _NET_IP6_ROUTE_H
+
+#define IP6_RT_PRIO_USER	1024
+#define IP6_RT_PRIO_ADDRCONF	256
+
+struct route_info {
+	__u8			type;
+	__u8			length;
+	__u8			prefix_len;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8			reserved_h:3,
+				route_pref:2,
+				reserved_l:3;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8			reserved_l:3,
+				route_pref:2,
+				reserved_h:3;
+#endif
+	__be32			lifetime;
+	__u8			prefix[0];	/* 0,8 or 16 */
+};
+
+#include <net/flow.h>
+#include <net/ip6_fib.h>
+#include <net/sock.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+
+#define RT6_LOOKUP_F_IFACE		0x00000001
+#define RT6_LOOKUP_F_REACHABLE		0x00000002
+#define RT6_LOOKUP_F_HAS_SADDR		0x00000004
+#define RT6_LOOKUP_F_SRCPREF_TMP	0x00000008
+#define RT6_LOOKUP_F_SRCPREF_PUBLIC	0x00000010
+#define RT6_LOOKUP_F_SRCPREF_COA	0x00000020
+
+/*
+ * rt6_srcprefs2flags() and rt6_flags2srcprefs() translate
+ * between IPV6_ADDR_PREFERENCES socket option values
+ *	IPV6_PREFER_SRC_TMP    = 0x1
+ *	IPV6_PREFER_SRC_PUBLIC = 0x2
+ *	IPV6_PREFER_SRC_COA    = 0x4
+ * and above RT6_LOOKUP_F_SRCPREF_xxx flags.
+ */
+static inline int rt6_srcprefs2flags(unsigned int srcprefs)
+{
+	/* No need to bitmask because srcprefs have only 3 bits. */
+	return srcprefs << 3;
+}
+
+static inline unsigned int rt6_flags2srcprefs(int flags)
+{
+	return (flags >> 3) & 7;
+}
+
+extern void			rt6_bind_peer(struct rt6_info *rt,
+					      int create);
+
+static inline struct inet_peer *rt6_get_peer(struct rt6_info *rt)
+{
+	if (rt->rt6i_peer)
+		return rt->rt6i_peer;
+
+	rt6_bind_peer(rt, 0);
+	return rt->rt6i_peer;
+}
+
+extern void			ip6_route_input(struct sk_buff *skb);
+
+extern struct dst_entry *	ip6_route_output(struct net *net,
+						 const struct sock *sk,
+						 struct flowi6 *fl6);
+extern struct dst_entry *	ip6_route_lookup(struct net *net,
+						 struct flowi6 *fl6, int flags);
+
+extern int			ip6_route_init(void);
+extern void			ip6_route_cleanup(void);
+
+extern int			ipv6_route_ioctl(struct net *net,
+						 unsigned int cmd,
+						 void __user *arg);
+
+extern int			ip6_route_add(struct fib6_config *cfg);
+extern int			ip6_ins_rt(struct rt6_info *);
+extern int			ip6_del_rt(struct rt6_info *);
+
+extern int			ip6_route_get_saddr(struct net *net,
+						    struct rt6_info *rt,
+						    const struct in6_addr *daddr,
+						    unsigned int prefs,
+						    struct in6_addr *saddr);
+
+extern struct rt6_info		*rt6_lookup(struct net *net,
+					    const struct in6_addr *daddr,
+					    const struct in6_addr *saddr,
+					    int oif, int flags);
+
+extern struct dst_entry *icmp6_dst_alloc(struct net_device *dev,
+					 struct neighbour *neigh,
+					 struct flowi6 *fl6);
+extern int icmp6_dst_gc(void);
+
+extern void fib6_force_start_gc(struct net *net);
+
+extern struct rt6_info *addrconf_dst_alloc(struct inet6_dev *idev,
+					   const struct in6_addr *addr,
+					   bool anycast);
+
+extern int			ip6_dst_hoplimit(struct dst_entry *dst);
+
+/*
+ *	support functions for ND
+ *
+ */
+extern struct rt6_info *	rt6_get_dflt_router(const struct in6_addr *addr,
+						    struct net_device *dev);
+extern struct rt6_info *	rt6_add_dflt_router(const struct in6_addr *gwaddr,
+						    struct net_device *dev,
+						    unsigned int pref);
+
+extern void			rt6_purge_dflt_routers(struct net *net);
+
+extern int			rt6_route_rcv(struct net_device *dev,
+					      u8 *opt, int len,
+					      const struct in6_addr *gwaddr);
+
+extern void			rt6_redirect(const struct in6_addr *dest,
+					     const struct in6_addr *src,
+					     const struct in6_addr *saddr,
+					     struct neighbour *neigh,
+					     u8 *lladdr,
+					     int on_link);
+
+extern void			rt6_pmtu_discovery(const struct in6_addr *daddr,
+						   const struct in6_addr *saddr,
+						   struct net_device *dev,
+						   u32 pmtu);
+
+struct netlink_callback;
+
+struct rt6_rtnl_dump_arg {
+	struct sk_buff *skb;
+	struct netlink_callback *cb;
+	struct net *net;
+};
+
+extern int rt6_dump_route(struct rt6_info *rt, void *p_arg);
+extern void rt6_ifdown(struct net *net, struct net_device *dev);
+extern void rt6_mtu_change(struct net_device *dev, unsigned mtu);
+extern void rt6_remove_prefsrc(struct inet6_ifaddr *ifp);
+
+
+/*
+ *	Store a destination cache entry in a socket
+ */
+static inline void __ip6_dst_store(struct sock *sk, struct dst_entry *dst,
+				   struct in6_addr *daddr, struct in6_addr *saddr)
+{
+	struct ipv6_pinfo *np = inet6_sk(sk);
+	struct rt6_info *rt = (struct rt6_info *) dst;
+
+	sk_setup_caps(sk, dst);
+	np->daddr_cache = daddr;
+#ifdef CONFIG_IPV6_SUBTREES
+	np->saddr_cache = saddr;
+#endif
+	np->dst_cookie = rt->rt6i_node ? rt->rt6i_node->fn_sernum : 0;
+}
+
+static inline void ip6_dst_store(struct sock *sk, struct dst_entry *dst,
+				 struct in6_addr *daddr, struct in6_addr *saddr)
+{
+	spin_lock(&sk->sk_dst_lock);
+	__ip6_dst_store(sk, dst, daddr, saddr);
+	spin_unlock(&sk->sk_dst_lock);
+}
+
+static inline int ipv6_unicast_destination(struct sk_buff *skb)
+{
+	struct rt6_info *rt = (struct rt6_info *) skb_dst(skb);
+
+	return rt->rt6i_flags & RTF_LOCAL;
+}
+
+int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *));
+
+static inline int ip6_skb_dst_mtu(struct sk_buff *skb)
+{
+	struct ipv6_pinfo *np = skb->sk ? inet6_sk(skb->sk) : NULL;
+
+	return (np && np->pmtudisc == IPV6_PMTUDISC_PROBE) ?
+	       skb_dst(skb)->dev->mtu : dst_mtu(skb_dst(skb));
+}
+
+#endif
diff --git a/include/net/ip6_tunnel.h b/include/net/ip6_tunnel.h
new file mode 100644
index 00000000..fc73e667
--- /dev/null
+++ b/include/net/ip6_tunnel.h
@@ -0,0 +1,32 @@
+#ifndef _NET_IP6_TUNNEL_H
+#define _NET_IP6_TUNNEL_H
+
+#include <linux/ipv6.h>
+#include <linux/netdevice.h>
+#include <linux/ip6_tunnel.h>
+
+/* capable of sending packets */
+#define IP6_TNL_F_CAP_XMIT 0x10000
+/* capable of receiving packets */
+#define IP6_TNL_F_CAP_RCV 0x20000
+
+/* IPv6 tunnel */
+
+struct ip6_tnl {
+	struct ip6_tnl __rcu *next;	/* next tunnel in list */
+	struct net_device *dev;	/* virtual device associated with tunnel */
+	struct ip6_tnl_parm parms;	/* tunnel configuration parameters */
+	struct flowi fl;	/* flowi template for xmit */
+	struct dst_entry *dst_cache;    /* cached dst */
+	u32 dst_cookie;
+};
+
+/* Tunnel encapsulation limit destination sub-option */
+
+struct ipv6_tlv_tnl_enc_lim {
+	__u8 type;		/* type-code for option         */
+	__u8 length;		/* option length                */
+	__u8 encap_limit;	/* tunnel encapsulation limit   */
+} __packed;
+
+#endif
diff --git a/include/net/ip_fib.h b/include/net/ip_fib.h
new file mode 100644
index 00000000..10422ef1
--- /dev/null
+++ b/include/net/ip_fib.h
@@ -0,0 +1,285 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET  is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the Forwarding Information Base.
+ *
+ * Authors:	A.N.Kuznetsov, <kuznet@ms2.inr.ac.ru>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _NET_IP_FIB_H
+#define _NET_IP_FIB_H
+
+#include <net/flow.h>
+#include <linux/seq_file.h>
+#include <net/fib_rules.h>
+
+struct fib_config {
+	u8			fc_dst_len;
+	u8			fc_tos;
+	u8			fc_protocol;
+	u8			fc_scope;
+	u8			fc_type;
+	/* 3 bytes unused */
+	u32			fc_table;
+	__be32			fc_dst;
+	__be32			fc_gw;
+	int			fc_oif;
+	u32			fc_flags;
+	u32			fc_priority;
+	__be32			fc_prefsrc;
+	struct nlattr		*fc_mx;
+	struct rtnexthop	*fc_mp;
+	int			fc_mx_len;
+	int			fc_mp_len;
+	u32			fc_flow;
+	u32			fc_nlflags;
+	struct nl_info		fc_nlinfo;
+ };
+
+struct fib_info;
+
+struct fib_nh {
+	struct net_device	*nh_dev;
+	struct hlist_node	nh_hash;
+	struct fib_info		*nh_parent;
+	unsigned		nh_flags;
+	unsigned char		nh_scope;
+#ifdef CONFIG_IP_ROUTE_MULTIPATH
+	int			nh_weight;
+	int			nh_power;
+#endif
+#ifdef CONFIG_IP_ROUTE_CLASSID
+	__u32			nh_tclassid;
+#endif
+	int			nh_oif;
+	__be32			nh_gw;
+	__be32			nh_saddr;
+	int			nh_saddr_genid;
+};
+
+/*
+ * This structure contains data shared by many of routes.
+ */
+
+struct fib_info {
+	struct hlist_node	fib_hash;
+	struct hlist_node	fib_lhash;
+	struct net		*fib_net;
+	int			fib_treeref;
+	atomic_t		fib_clntref;
+	unsigned		fib_flags;
+	unsigned char		fib_dead;
+	unsigned char		fib_protocol;
+	unsigned char		fib_scope;
+	__be32			fib_prefsrc;
+	u32			fib_priority;
+	u32			*fib_metrics;
+#define fib_mtu fib_metrics[RTAX_MTU-1]
+#define fib_window fib_metrics[RTAX_WINDOW-1]
+#define fib_rtt fib_metrics[RTAX_RTT-1]
+#define fib_advmss fib_metrics[RTAX_ADVMSS-1]
+	int			fib_nhs;
+#ifdef CONFIG_IP_ROUTE_MULTIPATH
+	int			fib_power;
+#endif
+	struct rcu_head		rcu;
+	struct fib_nh		fib_nh[0];
+#define fib_dev		fib_nh[0].nh_dev
+};
+
+
+#ifdef CONFIG_IP_MULTIPLE_TABLES
+struct fib_rule;
+#endif
+
+struct fib_table;
+struct fib_result {
+	unsigned char	prefixlen;
+	unsigned char	nh_sel;
+	unsigned char	type;
+	unsigned char	scope;
+	struct fib_info *fi;
+	struct fib_table *table;
+	struct list_head *fa_head;
+#ifdef CONFIG_IP_MULTIPLE_TABLES
+	struct fib_rule	*r;
+#endif
+};
+
+struct fib_result_nl {
+	__be32		fl_addr;   /* To be looked up*/
+	u32		fl_mark;
+	unsigned char	fl_tos;
+	unsigned char   fl_scope;
+	unsigned char   tb_id_in;
+
+	unsigned char   tb_id;      /* Results */
+	unsigned char	prefixlen;
+	unsigned char	nh_sel;
+	unsigned char	type;
+	unsigned char	scope;
+	int             err;      
+};
+
+#ifdef CONFIG_IP_ROUTE_MULTIPATH
+
+#define FIB_RES_NH(res)		((res).fi->fib_nh[(res).nh_sel])
+
+#define FIB_TABLE_HASHSZ 2
+
+#else /* CONFIG_IP_ROUTE_MULTIPATH */
+
+#define FIB_RES_NH(res)		((res).fi->fib_nh[0])
+
+#define FIB_TABLE_HASHSZ 256
+
+#endif /* CONFIG_IP_ROUTE_MULTIPATH */
+
+extern __be32 fib_info_update_nh_saddr(struct net *net, struct fib_nh *nh);
+
+#define FIB_RES_SADDR(net, res)				\
+	((FIB_RES_NH(res).nh_saddr_genid ==		\
+	  atomic_read(&(net)->ipv4.dev_addr_genid)) ?	\
+	 FIB_RES_NH(res).nh_saddr :			\
+	 fib_info_update_nh_saddr((net), &FIB_RES_NH(res)))
+#define FIB_RES_GW(res)			(FIB_RES_NH(res).nh_gw)
+#define FIB_RES_DEV(res)		(FIB_RES_NH(res).nh_dev)
+#define FIB_RES_OIF(res)		(FIB_RES_NH(res).nh_oif)
+
+#define FIB_RES_PREFSRC(net, res)	((res).fi->fib_prefsrc ? : \
+					 FIB_RES_SADDR(net, res))
+
+struct fib_table {
+	struct hlist_node tb_hlist;
+	u32		tb_id;
+	int		tb_default;
+	int		tb_num_default;
+	unsigned long	tb_data[0];
+};
+
+extern int fib_table_lookup(struct fib_table *tb, const struct flowi4 *flp,
+			    struct fib_result *res, int fib_flags);
+extern int fib_table_insert(struct fib_table *, struct fib_config *);
+extern int fib_table_delete(struct fib_table *, struct fib_config *);
+extern int fib_table_dump(struct fib_table *table, struct sk_buff *skb,
+			  struct netlink_callback *cb);
+extern int fib_table_flush(struct fib_table *table);
+extern void fib_free_table(struct fib_table *tb);
+
+
+
+#ifndef CONFIG_IP_MULTIPLE_TABLES
+
+#define TABLE_LOCAL_INDEX	0
+#define TABLE_MAIN_INDEX	1
+
+static inline struct fib_table *fib_get_table(struct net *net, u32 id)
+{
+	struct hlist_head *ptr;
+
+	ptr = id == RT_TABLE_LOCAL ?
+		&net->ipv4.fib_table_hash[TABLE_LOCAL_INDEX] :
+		&net->ipv4.fib_table_hash[TABLE_MAIN_INDEX];
+	return hlist_entry(ptr->first, struct fib_table, tb_hlist);
+}
+
+static inline struct fib_table *fib_new_table(struct net *net, u32 id)
+{
+	return fib_get_table(net, id);
+}
+
+static inline int fib_lookup(struct net *net, const struct flowi4 *flp,
+			     struct fib_result *res)
+{
+	struct fib_table *table;
+
+	table = fib_get_table(net, RT_TABLE_LOCAL);
+	if (!fib_table_lookup(table, flp, res, FIB_LOOKUP_NOREF))
+		return 0;
+
+	table = fib_get_table(net, RT_TABLE_MAIN);
+	if (!fib_table_lookup(table, flp, res, FIB_LOOKUP_NOREF))
+		return 0;
+	return -ENETUNREACH;
+}
+
+#else /* CONFIG_IP_MULTIPLE_TABLES */
+extern int __net_init fib4_rules_init(struct net *net);
+extern void __net_exit fib4_rules_exit(struct net *net);
+
+#ifdef CONFIG_IP_ROUTE_CLASSID
+extern u32 fib_rules_tclass(const struct fib_result *res);
+#endif
+
+extern int fib_lookup(struct net *n, struct flowi4 *flp, struct fib_result *res);
+
+extern struct fib_table *fib_new_table(struct net *net, u32 id);
+extern struct fib_table *fib_get_table(struct net *net, u32 id);
+
+#endif /* CONFIG_IP_MULTIPLE_TABLES */
+
+/* Exported by fib_frontend.c */
+extern const struct nla_policy rtm_ipv4_policy[];
+extern void		ip_fib_init(void);
+extern int fib_validate_source(struct sk_buff *skb, __be32 src, __be32 dst,
+			       u8 tos, int oif, struct net_device *dev,
+			       __be32 *spec_dst, u32 *itag);
+extern void fib_select_default(struct fib_result *res);
+
+/* Exported by fib_semantics.c */
+extern int ip_fib_check_default(__be32 gw, struct net_device *dev);
+extern int fib_sync_down_dev(struct net_device *dev, int force);
+extern int fib_sync_down_addr(struct net *net, __be32 local);
+extern void fib_update_nh_saddrs(struct net_device *dev);
+extern int fib_sync_up(struct net_device *dev);
+extern void fib_select_multipath(struct fib_result *res);
+
+/* Exported by fib_trie.c */
+extern void fib_trie_init(void);
+extern struct fib_table *fib_trie_table(u32 id);
+
+static inline void fib_combine_itag(u32 *itag, const struct fib_result *res)
+{
+#ifdef CONFIG_IP_ROUTE_CLASSID
+#ifdef CONFIG_IP_MULTIPLE_TABLES
+	u32 rtag;
+#endif
+	*itag = FIB_RES_NH(*res).nh_tclassid<<16;
+#ifdef CONFIG_IP_MULTIPLE_TABLES
+	rtag = fib_rules_tclass(res);
+	if (*itag == 0)
+		*itag = (rtag<<16);
+	*itag |= (rtag>>16);
+#endif
+#endif
+}
+
+extern void free_fib_info(struct fib_info *fi);
+
+static inline void fib_info_put(struct fib_info *fi)
+{
+	if (atomic_dec_and_test(&fi->fib_clntref))
+		free_fib_info(fi);
+}
+
+#ifdef CONFIG_PROC_FS
+extern int __net_init  fib_proc_init(struct net *net);
+extern void __net_exit fib_proc_exit(struct net *net);
+#else
+static inline int fib_proc_init(struct net *net)
+{
+	return 0;
+}
+static inline void fib_proc_exit(struct net *net)
+{
+}
+#endif
+
+#endif  /* _NET_FIB_H */
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
new file mode 100644
index 00000000..72522f08
--- /dev/null
+++ b/include/net/ip_vs.h
@@ -0,0 +1,1426 @@
+/*
+ *      IP Virtual Server
+ *      data structure and functionality definitions
+ */
+
+#ifndef _NET_IP_VS_H
+#define _NET_IP_VS_H
+
+#include <linux/ip_vs.h>                /* definitions shared with userland */
+
+#include <asm/types.h>                  /* for __uXX types */
+
+#include <linux/sysctl.h>               /* for ctl_path */
+#include <linux/list.h>                 /* for struct list_head */
+#include <linux/spinlock.h>             /* for struct rwlock_t */
+#include <linux/atomic.h>                 /* for struct atomic_t */
+#include <linux/compiler.h>
+#include <linux/timer.h>
+#include <linux/bug.h>
+
+#include <net/checksum.h>
+#include <linux/netfilter.h>		/* for union nf_inet_addr */
+#include <linux/ip.h>
+#include <linux/ipv6.h>			/* for struct ipv6hdr */
+#include <net/ipv6.h>
+#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
+#include <net/netfilter/nf_conntrack.h>
+#endif
+#include <net/net_namespace.h>		/* Netw namespace */
+
+/*
+ * Generic access of ipvs struct
+ */
+static inline struct netns_ipvs *net_ipvs(struct net* net)
+{
+	return net->ipvs;
+}
+/*
+ * Get net ptr from skb in traffic cases
+ * use skb_sknet when call is from userland (ioctl or netlink)
+ */
+static inline struct net *skb_net(const struct sk_buff *skb)
+{
+#ifdef CONFIG_NET_NS
+#ifdef CONFIG_IP_VS_DEBUG
+	/*
+	 * This is used for debug only.
+	 * Start with the most likely hit
+	 * End with BUG
+	 */
+	if (likely(skb->dev && skb->dev->nd_net))
+		return dev_net(skb->dev);
+	if (skb_dst(skb) && skb_dst(skb)->dev)
+		return dev_net(skb_dst(skb)->dev);
+	WARN(skb->sk, "Maybe skb_sknet should be used in %s() at line:%d\n",
+		      __func__, __LINE__);
+	if (likely(skb->sk && skb->sk->sk_net))
+		return sock_net(skb->sk);
+	pr_err("There is no net ptr to find in the skb in %s() line:%d\n",
+		__func__, __LINE__);
+	BUG();
+#else
+	return dev_net(skb->dev ? : skb_dst(skb)->dev);
+#endif
+#else
+	return &init_net;
+#endif
+}
+
+static inline struct net *skb_sknet(const struct sk_buff *skb)
+{
+#ifdef CONFIG_NET_NS
+#ifdef CONFIG_IP_VS_DEBUG
+	/* Start with the most likely hit */
+	if (likely(skb->sk && skb->sk->sk_net))
+		return sock_net(skb->sk);
+	WARN(skb->dev, "Maybe skb_net should be used instead in %s() line:%d\n",
+		       __func__, __LINE__);
+	if (likely(skb->dev && skb->dev->nd_net))
+		return dev_net(skb->dev);
+	pr_err("There is no net ptr to find in the skb in %s() line:%d\n",
+		__func__, __LINE__);
+	BUG();
+#else
+	return sock_net(skb->sk);
+#endif
+#else
+	return &init_net;
+#endif
+}
+/*
+ * This one needed for single_open_net since net is stored directly in
+ * private not as a struct i.e. seq_file_net can't be used.
+ */
+static inline struct net *seq_file_single_net(struct seq_file *seq)
+{
+#ifdef CONFIG_NET_NS
+	return (struct net *)seq->private;
+#else
+	return &init_net;
+#endif
+}
+
+/* Connections' size value needed by ip_vs_ctl.c */
+extern int ip_vs_conn_tab_size;
+
+
+struct ip_vs_iphdr {
+	int len;
+	__u8 protocol;
+	union nf_inet_addr saddr;
+	union nf_inet_addr daddr;
+};
+
+static inline void
+ip_vs_fill_iphdr(int af, const void *nh, struct ip_vs_iphdr *iphdr)
+{
+#ifdef CONFIG_IP_VS_IPV6
+	if (af == AF_INET6) {
+		const struct ipv6hdr *iph = nh;
+		iphdr->len = sizeof(struct ipv6hdr);
+		iphdr->protocol = iph->nexthdr;
+		iphdr->saddr.in6 = iph->saddr;
+		iphdr->daddr.in6 = iph->daddr;
+	} else
+#endif
+	{
+		const struct iphdr *iph = nh;
+		iphdr->len = iph->ihl * 4;
+		iphdr->protocol = iph->protocol;
+		iphdr->saddr.ip = iph->saddr;
+		iphdr->daddr.ip = iph->daddr;
+	}
+}
+
+static inline void ip_vs_addr_copy(int af, union nf_inet_addr *dst,
+				   const union nf_inet_addr *src)
+{
+#ifdef CONFIG_IP_VS_IPV6
+	if (af == AF_INET6)
+		dst->in6 = src->in6;
+	else
+#endif
+	dst->ip = src->ip;
+}
+
+static inline int ip_vs_addr_equal(int af, const union nf_inet_addr *a,
+				   const union nf_inet_addr *b)
+{
+#ifdef CONFIG_IP_VS_IPV6
+	if (af == AF_INET6)
+		return ipv6_addr_equal(&a->in6, &b->in6);
+#endif
+	return a->ip == b->ip;
+}
+
+#ifdef CONFIG_IP_VS_DEBUG
+#include <linux/net.h>
+
+extern int ip_vs_get_debug_level(void);
+
+static inline const char *ip_vs_dbg_addr(int af, char *buf, size_t buf_len,
+					 const union nf_inet_addr *addr,
+					 int *idx)
+{
+	int len;
+#ifdef CONFIG_IP_VS_IPV6
+	if (af == AF_INET6)
+		len = snprintf(&buf[*idx], buf_len - *idx, "[%pI6]",
+			       &addr->in6) + 1;
+	else
+#endif
+		len = snprintf(&buf[*idx], buf_len - *idx, "%pI4",
+			       &addr->ip) + 1;
+
+	*idx += len;
+	BUG_ON(*idx > buf_len + 1);
+	return &buf[*idx - len];
+}
+
+#define IP_VS_DBG_BUF(level, msg, ...)					\
+	do {								\
+		char ip_vs_dbg_buf[160];				\
+		int ip_vs_dbg_idx = 0;					\
+		if (level <= ip_vs_get_debug_level())			\
+			printk(KERN_DEBUG pr_fmt(msg), ##__VA_ARGS__);	\
+	} while (0)
+#define IP_VS_ERR_BUF(msg...)						\
+	do {								\
+		char ip_vs_dbg_buf[160];				\
+		int ip_vs_dbg_idx = 0;					\
+		pr_err(msg);						\
+	} while (0)
+
+/* Only use from within IP_VS_DBG_BUF() or IP_VS_ERR_BUF macros */
+#define IP_VS_DBG_ADDR(af, addr)					\
+	ip_vs_dbg_addr(af, ip_vs_dbg_buf,				\
+		       sizeof(ip_vs_dbg_buf), addr,			\
+		       &ip_vs_dbg_idx)
+
+#define IP_VS_DBG(level, msg, ...)					\
+	do {								\
+		if (level <= ip_vs_get_debug_level())			\
+			printk(KERN_DEBUG pr_fmt(msg), ##__VA_ARGS__);	\
+	} while (0)
+#define IP_VS_DBG_RL(msg, ...)						\
+	do {								\
+		if (net_ratelimit())					\
+			printk(KERN_DEBUG pr_fmt(msg), ##__VA_ARGS__);	\
+	} while (0)
+#define IP_VS_DBG_PKT(level, af, pp, skb, ofs, msg)			\
+	do {								\
+		if (level <= ip_vs_get_debug_level())			\
+			pp->debug_packet(af, pp, skb, ofs, msg);	\
+	} while (0)
+#define IP_VS_DBG_RL_PKT(level, af, pp, skb, ofs, msg)			\
+	do {								\
+		if (level <= ip_vs_get_debug_level() &&			\
+		    net_ratelimit())					\
+			pp->debug_packet(af, pp, skb, ofs, msg);	\
+	} while (0)
+#else	/* NO DEBUGGING at ALL */
+#define IP_VS_DBG_BUF(level, msg...)  do {} while (0)
+#define IP_VS_ERR_BUF(msg...)  do {} while (0)
+#define IP_VS_DBG(level, msg...)  do {} while (0)
+#define IP_VS_DBG_RL(msg...)  do {} while (0)
+#define IP_VS_DBG_PKT(level, af, pp, skb, ofs, msg)	do {} while (0)
+#define IP_VS_DBG_RL_PKT(level, af, pp, skb, ofs, msg)	do {} while (0)
+#endif
+
+#define IP_VS_BUG() BUG()
+#define IP_VS_ERR_RL(msg, ...)						\
+	do {								\
+		if (net_ratelimit())					\
+			pr_err(msg, ##__VA_ARGS__);			\
+	} while (0)
+
+#ifdef CONFIG_IP_VS_DEBUG
+#define EnterFunction(level)						\
+	do {								\
+		if (level <= ip_vs_get_debug_level())			\
+			printk(KERN_DEBUG				\
+			       pr_fmt("Enter: %s, %s line %i\n"),	\
+			       __func__, __FILE__, __LINE__);		\
+	} while (0)
+#define LeaveFunction(level)						\
+	do {								\
+		if (level <= ip_vs_get_debug_level())			\
+			printk(KERN_DEBUG				\
+			       pr_fmt("Leave: %s, %s line %i\n"),	\
+			       __func__, __FILE__, __LINE__);		\
+	} while (0)
+#else
+#define EnterFunction(level)   do {} while (0)
+#define LeaveFunction(level)   do {} while (0)
+#endif
+
+#define	IP_VS_WAIT_WHILE(expr)	while (expr) { cpu_relax(); }
+
+
+/*
+ *      The port number of FTP service (in network order).
+ */
+#define FTPPORT  cpu_to_be16(21)
+#define FTPDATA  cpu_to_be16(20)
+
+/*
+ *      TCP State Values
+ */
+enum {
+	IP_VS_TCP_S_NONE = 0,
+	IP_VS_TCP_S_ESTABLISHED,
+	IP_VS_TCP_S_SYN_SENT,
+	IP_VS_TCP_S_SYN_RECV,
+	IP_VS_TCP_S_FIN_WAIT,
+	IP_VS_TCP_S_TIME_WAIT,
+	IP_VS_TCP_S_CLOSE,
+	IP_VS_TCP_S_CLOSE_WAIT,
+	IP_VS_TCP_S_LAST_ACK,
+	IP_VS_TCP_S_LISTEN,
+	IP_VS_TCP_S_SYNACK,
+	IP_VS_TCP_S_LAST
+};
+
+/*
+ *	UDP State Values
+ */
+enum {
+	IP_VS_UDP_S_NORMAL,
+	IP_VS_UDP_S_LAST,
+};
+
+/*
+ *	ICMP State Values
+ */
+enum {
+	IP_VS_ICMP_S_NORMAL,
+	IP_VS_ICMP_S_LAST,
+};
+
+/*
+ *	SCTP State Values
+ */
+enum ip_vs_sctp_states {
+	IP_VS_SCTP_S_NONE,
+	IP_VS_SCTP_S_INIT_CLI,
+	IP_VS_SCTP_S_INIT_SER,
+	IP_VS_SCTP_S_INIT_ACK_CLI,
+	IP_VS_SCTP_S_INIT_ACK_SER,
+	IP_VS_SCTP_S_ECHO_CLI,
+	IP_VS_SCTP_S_ECHO_SER,
+	IP_VS_SCTP_S_ESTABLISHED,
+	IP_VS_SCTP_S_SHUT_CLI,
+	IP_VS_SCTP_S_SHUT_SER,
+	IP_VS_SCTP_S_SHUT_ACK_CLI,
+	IP_VS_SCTP_S_SHUT_ACK_SER,
+	IP_VS_SCTP_S_CLOSED,
+	IP_VS_SCTP_S_LAST
+};
+
+/*
+ *	Delta sequence info structure
+ *	Each ip_vs_conn has 2 (output AND input seq. changes).
+ *      Only used in the VS/NAT.
+ */
+struct ip_vs_seq {
+	__u32			init_seq;	/* Add delta from this seq */
+	__u32			delta;		/* Delta in sequence numbers */
+	__u32			previous_delta;	/* Delta in sequence numbers
+						   before last resized pkt */
+};
+
+/*
+ * counters per cpu
+ */
+struct ip_vs_counters {
+	__u32		conns;		/* connections scheduled */
+	__u32		inpkts;		/* incoming packets */
+	__u32		outpkts;	/* outgoing packets */
+	__u64		inbytes;	/* incoming bytes */
+	__u64		outbytes;	/* outgoing bytes */
+};
+/*
+ * Stats per cpu
+ */
+struct ip_vs_cpu_stats {
+	struct ip_vs_counters   ustats;
+	struct u64_stats_sync   syncp;
+};
+
+/*
+ *	IPVS statistics objects
+ */
+struct ip_vs_estimator {
+	struct list_head	list;
+
+	u64			last_inbytes;
+	u64			last_outbytes;
+	u32			last_conns;
+	u32			last_inpkts;
+	u32			last_outpkts;
+
+	u32			cps;
+	u32			inpps;
+	u32			outpps;
+	u32			inbps;
+	u32			outbps;
+};
+
+struct ip_vs_stats {
+	struct ip_vs_stats_user	ustats;		/* statistics */
+	struct ip_vs_estimator	est;		/* estimator */
+	struct ip_vs_cpu_stats	*cpustats;	/* per cpu counters */
+	spinlock_t		lock;		/* spin lock */
+	struct ip_vs_stats_user	ustats0;	/* reset values */
+};
+
+struct dst_entry;
+struct iphdr;
+struct ip_vs_conn;
+struct ip_vs_app;
+struct sk_buff;
+struct ip_vs_proto_data;
+
+struct ip_vs_protocol {
+	struct ip_vs_protocol	*next;
+	char			*name;
+	u16			protocol;
+	u16			num_states;
+	int			dont_defrag;
+
+	void (*init)(struct ip_vs_protocol *pp);
+
+	void (*exit)(struct ip_vs_protocol *pp);
+
+	int (*init_netns)(struct net *net, struct ip_vs_proto_data *pd);
+
+	void (*exit_netns)(struct net *net, struct ip_vs_proto_data *pd);
+
+	int (*conn_schedule)(int af, struct sk_buff *skb,
+			     struct ip_vs_proto_data *pd,
+			     int *verdict, struct ip_vs_conn **cpp);
+
+	struct ip_vs_conn *
+	(*conn_in_get)(int af,
+		       const struct sk_buff *skb,
+		       const struct ip_vs_iphdr *iph,
+		       unsigned int proto_off,
+		       int inverse);
+
+	struct ip_vs_conn *
+	(*conn_out_get)(int af,
+			const struct sk_buff *skb,
+			const struct ip_vs_iphdr *iph,
+			unsigned int proto_off,
+			int inverse);
+
+	int (*snat_handler)(struct sk_buff *skb,
+			    struct ip_vs_protocol *pp, struct ip_vs_conn *cp);
+
+	int (*dnat_handler)(struct sk_buff *skb,
+			    struct ip_vs_protocol *pp, struct ip_vs_conn *cp);
+
+	int (*csum_check)(int af, struct sk_buff *skb,
+			  struct ip_vs_protocol *pp);
+
+	const char *(*state_name)(int state);
+
+	void (*state_transition)(struct ip_vs_conn *cp, int direction,
+				 const struct sk_buff *skb,
+				 struct ip_vs_proto_data *pd);
+
+	int (*register_app)(struct net *net, struct ip_vs_app *inc);
+
+	void (*unregister_app)(struct net *net, struct ip_vs_app *inc);
+
+	int (*app_conn_bind)(struct ip_vs_conn *cp);
+
+	void (*debug_packet)(int af, struct ip_vs_protocol *pp,
+			     const struct sk_buff *skb,
+			     int offset,
+			     const char *msg);
+
+	void (*timeout_change)(struct ip_vs_proto_data *pd, int flags);
+};
+
+/*
+ * protocol data per netns
+ */
+struct ip_vs_proto_data {
+	struct ip_vs_proto_data	*next;
+	struct ip_vs_protocol	*pp;
+	int			*timeout_table;	/* protocol timeout table */
+	atomic_t		appcnt;		/* counter of proto app incs. */
+	struct tcp_states_t	*tcp_state_table;
+};
+
+extern struct ip_vs_protocol   *ip_vs_proto_get(unsigned short proto);
+extern struct ip_vs_proto_data *ip_vs_proto_data_get(struct net *net,
+						     unsigned short proto);
+
+struct ip_vs_conn_param {
+	struct net			*net;
+	const union nf_inet_addr	*caddr;
+	const union nf_inet_addr	*vaddr;
+	__be16				cport;
+	__be16				vport;
+	__u16				protocol;
+	u16				af;
+
+	const struct ip_vs_pe		*pe;
+	char				*pe_data;
+	__u8				pe_data_len;
+};
+
+/*
+ *	IP_VS structure allocated for each dynamically scheduled connection
+ */
+struct ip_vs_conn {
+	struct hlist_node	c_list;         /* hashed list heads */
+#ifdef CONFIG_NET_NS
+	struct net              *net;           /* Name space */
+#endif
+	/* Protocol, addresses and port numbers */
+	u16                     af;             /* address family */
+	__be16                  cport;
+	__be16                  vport;
+	__be16                  dport;
+	__u32                   fwmark;         /* Fire wall mark from skb */
+	union nf_inet_addr      caddr;          /* client address */
+	union nf_inet_addr      vaddr;          /* virtual address */
+	union nf_inet_addr      daddr;          /* destination address */
+	volatile __u32          flags;          /* status flags */
+	__u16                   protocol;       /* Which protocol (TCP/UDP) */
+
+	/* counter and timer */
+	atomic_t		refcnt;		/* reference count */
+	struct timer_list	timer;		/* Expiration timer */
+	volatile unsigned long	timeout;	/* timeout */
+
+	/* Flags and state transition */
+	spinlock_t              lock;           /* lock for state transition */
+	volatile __u16          state;          /* state info */
+	volatile __u16          old_state;      /* old state, to be used for
+						 * state transition triggerd
+						 * synchronization
+						 */
+
+	/* Control members */
+	struct ip_vs_conn       *control;       /* Master control connection */
+	atomic_t                n_control;      /* Number of controlled ones */
+	struct ip_vs_dest       *dest;          /* real server */
+	atomic_t                in_pkts;        /* incoming packet counter */
+
+	/* packet transmitter for different forwarding methods.  If it
+	   mangles the packet, it must return NF_DROP or better NF_STOLEN,
+	   otherwise this must be changed to a sk_buff **.
+	   NF_ACCEPT can be returned when destination is local.
+	 */
+	int (*packet_xmit)(struct sk_buff *skb, struct ip_vs_conn *cp,
+			   struct ip_vs_protocol *pp);
+
+	/* Note: we can group the following members into a structure,
+	   in order to save more space, and the following members are
+	   only used in VS/NAT anyway */
+	struct ip_vs_app        *app;           /* bound ip_vs_app object */
+	void                    *app_data;      /* Application private data */
+	struct ip_vs_seq        in_seq;         /* incoming seq. struct */
+	struct ip_vs_seq        out_seq;        /* outgoing seq. struct */
+
+	const struct ip_vs_pe	*pe;
+	char			*pe_data;
+	__u8			pe_data_len;
+};
+
+/*
+ *  To save some memory in conn table when name space is disabled.
+ */
+static inline struct net *ip_vs_conn_net(const struct ip_vs_conn *cp)
+{
+#ifdef CONFIG_NET_NS
+	return cp->net;
+#else
+	return &init_net;
+#endif
+}
+static inline void ip_vs_conn_net_set(struct ip_vs_conn *cp, struct net *net)
+{
+#ifdef CONFIG_NET_NS
+	cp->net = net;
+#endif
+}
+
+static inline int ip_vs_conn_net_eq(const struct ip_vs_conn *cp,
+				    struct net *net)
+{
+#ifdef CONFIG_NET_NS
+	return cp->net == net;
+#else
+	return 1;
+#endif
+}
+
+/*
+ *	Extended internal versions of struct ip_vs_service_user and
+ *	ip_vs_dest_user for IPv6 support.
+ *
+ *	We need these to conveniently pass around service and destination
+ *	options, but unfortunately, we also need to keep the old definitions to
+ *	maintain userspace backwards compatibility for the setsockopt interface.
+ */
+struct ip_vs_service_user_kern {
+	/* virtual service addresses */
+	u16			af;
+	u16			protocol;
+	union nf_inet_addr	addr;		/* virtual ip address */
+	u16			port;
+	u32			fwmark;		/* firwall mark of service */
+
+	/* virtual service options */
+	char			*sched_name;
+	char			*pe_name;
+	unsigned		flags;		/* virtual service flags */
+	unsigned		timeout;	/* persistent timeout in sec */
+	u32			netmask;	/* persistent netmask */
+};
+
+
+struct ip_vs_dest_user_kern {
+	/* destination server address */
+	union nf_inet_addr	addr;
+	u16			port;
+
+	/* real server options */
+	unsigned		conn_flags;	/* connection flags */
+	int			weight;		/* destination weight */
+
+	/* thresholds for active connections */
+	u32			u_threshold;	/* upper threshold */
+	u32			l_threshold;	/* lower threshold */
+};
+
+
+/*
+ *	The information about the virtual service offered to the net
+ *	and the forwarding entries
+ */
+struct ip_vs_service {
+	struct list_head	s_list;   /* for normal service table */
+	struct list_head	f_list;   /* for fwmark-based service table */
+	atomic_t		refcnt;   /* reference counter */
+	atomic_t		usecnt;   /* use counter */
+
+	u16			af;       /* address family */
+	__u16			protocol; /* which protocol (TCP/UDP) */
+	union nf_inet_addr	addr;	  /* IP address for virtual service */
+	__be16			port;	  /* port number for the service */
+	__u32                   fwmark;   /* firewall mark of the service */
+	unsigned		flags;	  /* service status flags */
+	unsigned		timeout;  /* persistent timeout in ticks */
+	__be32			netmask;  /* grouping granularity */
+	struct net		*net;
+
+	struct list_head	destinations;  /* real server d-linked list */
+	__u32			num_dests;     /* number of servers */
+	struct ip_vs_stats      stats;         /* statistics for the service */
+	struct ip_vs_app	*inc;	  /* bind conns to this app inc */
+
+	/* for scheduling */
+	struct ip_vs_scheduler	*scheduler;    /* bound scheduler object */
+	rwlock_t		sched_lock;    /* lock sched_data */
+	void			*sched_data;   /* scheduler application data */
+
+	/* alternate persistence engine */
+	struct ip_vs_pe		*pe;
+};
+
+
+/*
+ *	The real server destination forwarding entry
+ *	with ip address, port number, and so on.
+ */
+struct ip_vs_dest {
+	struct list_head	n_list;   /* for the dests in the service */
+	struct list_head	d_list;   /* for table with all the dests */
+
+	u16			af;		/* address family */
+	__be16			port;		/* port number of the server */
+	union nf_inet_addr	addr;		/* IP address of the server */
+	volatile unsigned	flags;		/* dest status flags */
+	atomic_t		conn_flags;	/* flags to copy to conn */
+	atomic_t		weight;		/* server weight */
+
+	atomic_t		refcnt;		/* reference counter */
+	struct ip_vs_stats      stats;          /* statistics */
+
+	/* connection counters and thresholds */
+	atomic_t		activeconns;	/* active connections */
+	atomic_t		inactconns;	/* inactive connections */
+	atomic_t		persistconns;	/* persistent connections */
+	__u32			u_threshold;	/* upper threshold */
+	__u32			l_threshold;	/* lower threshold */
+
+	/* for destination cache */
+	spinlock_t		dst_lock;	/* lock of dst_cache */
+	struct dst_entry	*dst_cache;	/* destination cache entry */
+	u32			dst_rtos;	/* RT_TOS(tos) for dst */
+	u32			dst_cookie;
+	union nf_inet_addr	dst_saddr;
+
+	/* for virtual service */
+	struct ip_vs_service	*svc;		/* service it belongs to */
+	__u16			protocol;	/* which protocol (TCP/UDP) */
+	__be16			vport;		/* virtual port number */
+	union nf_inet_addr	vaddr;		/* virtual IP address */
+	__u32			vfwmark;	/* firewall mark of service */
+};
+
+
+/*
+ *	The scheduler object
+ */
+struct ip_vs_scheduler {
+	struct list_head	n_list;		/* d-linked list head */
+	char			*name;		/* scheduler name */
+	atomic_t		refcnt;		/* reference counter */
+	struct module		*module;	/* THIS_MODULE/NULL */
+
+	/* scheduler initializing service */
+	int (*init_service)(struct ip_vs_service *svc);
+	/* scheduling service finish */
+	int (*done_service)(struct ip_vs_service *svc);
+	/* scheduler updating service */
+	int (*update_service)(struct ip_vs_service *svc);
+
+	/* selecting a server from the given service */
+	struct ip_vs_dest* (*schedule)(struct ip_vs_service *svc,
+				       const struct sk_buff *skb);
+};
+
+/* The persistence engine object */
+struct ip_vs_pe {
+	struct list_head	n_list;		/* d-linked list head */
+	char			*name;		/* scheduler name */
+	atomic_t		refcnt;		/* reference counter */
+	struct module		*module;	/* THIS_MODULE/NULL */
+
+	/* get the connection template, if any */
+	int (*fill_param)(struct ip_vs_conn_param *p, struct sk_buff *skb);
+	bool (*ct_match)(const struct ip_vs_conn_param *p,
+			 struct ip_vs_conn *ct);
+	u32 (*hashkey_raw)(const struct ip_vs_conn_param *p, u32 initval,
+			   bool inverse);
+	int (*show_pe_data)(const struct ip_vs_conn *cp, char *buf);
+};
+
+/*
+ *	The application module object (a.k.a. app incarnation)
+ */
+struct ip_vs_app {
+	struct list_head	a_list;		/* member in app list */
+	int			type;		/* IP_VS_APP_TYPE_xxx */
+	char			*name;		/* application module name */
+	__u16			protocol;
+	struct module		*module;	/* THIS_MODULE/NULL */
+	struct list_head	incs_list;	/* list of incarnations */
+
+	/* members for application incarnations */
+	struct list_head	p_list;		/* member in proto app list */
+	struct ip_vs_app	*app;		/* its real application */
+	__be16			port;		/* port number in net order */
+	atomic_t		usecnt;		/* usage counter */
+
+	/*
+	 * output hook: Process packet in inout direction, diff set for TCP.
+	 * Return: 0=Error, 1=Payload Not Mangled/Mangled but checksum is ok,
+	 *	   2=Mangled but checksum was not updated
+	 */
+	int (*pkt_out)(struct ip_vs_app *, struct ip_vs_conn *,
+		       struct sk_buff *, int *diff);
+
+	/*
+	 * input hook: Process packet in outin direction, diff set for TCP.
+	 * Return: 0=Error, 1=Payload Not Mangled/Mangled but checksum is ok,
+	 *	   2=Mangled but checksum was not updated
+	 */
+	int (*pkt_in)(struct ip_vs_app *, struct ip_vs_conn *,
+		      struct sk_buff *, int *diff);
+
+	/* ip_vs_app initializer */
+	int (*init_conn)(struct ip_vs_app *, struct ip_vs_conn *);
+
+	/* ip_vs_app finish */
+	int (*done_conn)(struct ip_vs_app *, struct ip_vs_conn *);
+
+
+	/* not used now */
+	int (*bind_conn)(struct ip_vs_app *, struct ip_vs_conn *,
+			 struct ip_vs_protocol *);
+
+	void (*unbind_conn)(struct ip_vs_app *, struct ip_vs_conn *);
+
+	int *			timeout_table;
+	int *			timeouts;
+	int			timeouts_size;
+
+	int (*conn_schedule)(struct sk_buff *skb, struct ip_vs_app *app,
+			     int *verdict, struct ip_vs_conn **cpp);
+
+	struct ip_vs_conn *
+	(*conn_in_get)(const struct sk_buff *skb, struct ip_vs_app *app,
+		       const struct iphdr *iph, unsigned int proto_off,
+		       int inverse);
+
+	struct ip_vs_conn *
+	(*conn_out_get)(const struct sk_buff *skb, struct ip_vs_app *app,
+			const struct iphdr *iph, unsigned int proto_off,
+			int inverse);
+
+	int (*state_transition)(struct ip_vs_conn *cp, int direction,
+				const struct sk_buff *skb,
+				struct ip_vs_app *app);
+
+	void (*timeout_change)(struct ip_vs_app *app, int flags);
+};
+
+/* IPVS in network namespace */
+struct netns_ipvs {
+	int			gen;		/* Generation */
+	int			enable;		/* enable like nf_hooks do */
+	/*
+	 *	Hash table: for real service lookups
+	 */
+	#define IP_VS_RTAB_BITS 4
+	#define IP_VS_RTAB_SIZE (1 << IP_VS_RTAB_BITS)
+	#define IP_VS_RTAB_MASK (IP_VS_RTAB_SIZE - 1)
+
+	struct list_head	rs_table[IP_VS_RTAB_SIZE];
+	/* ip_vs_app */
+	struct list_head	app_list;
+	/* ip_vs_ftp */
+	struct ip_vs_app	*ftp_app;
+	/* ip_vs_proto */
+	#define IP_VS_PROTO_TAB_SIZE	32	/* must be power of 2 */
+	struct ip_vs_proto_data *proto_data_table[IP_VS_PROTO_TAB_SIZE];
+	/* ip_vs_proto_tcp */
+#ifdef CONFIG_IP_VS_PROTO_TCP
+	#define	TCP_APP_TAB_BITS	4
+	#define	TCP_APP_TAB_SIZE	(1 << TCP_APP_TAB_BITS)
+	#define	TCP_APP_TAB_MASK	(TCP_APP_TAB_SIZE - 1)
+	struct list_head	tcp_apps[TCP_APP_TAB_SIZE];
+	spinlock_t		tcp_app_lock;
+#endif
+	/* ip_vs_proto_udp */
+#ifdef CONFIG_IP_VS_PROTO_UDP
+	#define	UDP_APP_TAB_BITS	4
+	#define	UDP_APP_TAB_SIZE	(1 << UDP_APP_TAB_BITS)
+	#define	UDP_APP_TAB_MASK	(UDP_APP_TAB_SIZE - 1)
+	struct list_head	udp_apps[UDP_APP_TAB_SIZE];
+	spinlock_t		udp_app_lock;
+#endif
+	/* ip_vs_proto_sctp */
+#ifdef CONFIG_IP_VS_PROTO_SCTP
+	#define SCTP_APP_TAB_BITS	4
+	#define SCTP_APP_TAB_SIZE	(1 << SCTP_APP_TAB_BITS)
+	#define SCTP_APP_TAB_MASK	(SCTP_APP_TAB_SIZE - 1)
+	/* Hash table for SCTP application incarnations	 */
+	struct list_head	sctp_apps[SCTP_APP_TAB_SIZE];
+	spinlock_t		sctp_app_lock;
+#endif
+	/* ip_vs_conn */
+	atomic_t		conn_count;      /*  connection counter */
+
+	/* ip_vs_ctl */
+	struct ip_vs_stats		tot_stats;  /* Statistics & est. */
+
+	int			num_services;    /* no of virtual services */
+
+	rwlock_t		rs_lock;         /* real services table */
+	/* Trash for destinations */
+	struct list_head	dest_trash;
+	/* Service counters */
+	atomic_t		ftpsvc_counter;
+	atomic_t		nullsvc_counter;
+
+#ifdef CONFIG_SYSCTL
+	/* 1/rate drop and drop-entry variables */
+	struct delayed_work	defense_work;   /* Work handler */
+	int			drop_rate;
+	int			drop_counter;
+	atomic_t		dropentry;
+	/* locks in ctl.c */
+	spinlock_t		dropentry_lock;  /* drop entry handling */
+	spinlock_t		droppacket_lock; /* drop packet handling */
+	spinlock_t		securetcp_lock;  /* state and timeout tables */
+
+	/* sys-ctl struct */
+	struct ctl_table_header	*sysctl_hdr;
+	struct ctl_table	*sysctl_tbl;
+#endif
+
+	/* sysctl variables */
+	int			sysctl_amemthresh;
+	int			sysctl_am_droprate;
+	int			sysctl_drop_entry;
+	int			sysctl_drop_packet;
+	int			sysctl_secure_tcp;
+#ifdef CONFIG_IP_VS_NFCT
+	int			sysctl_conntrack;
+#endif
+	int			sysctl_snat_reroute;
+	int			sysctl_sync_ver;
+	int			sysctl_cache_bypass;
+	int			sysctl_expire_nodest_conn;
+	int			sysctl_expire_quiescent_template;
+	int			sysctl_sync_threshold[2];
+	int			sysctl_nat_icmp_send;
+
+	/* ip_vs_lblc */
+	int			sysctl_lblc_expiration;
+	struct ctl_table_header	*lblc_ctl_header;
+	struct ctl_table	*lblc_ctl_table;
+	/* ip_vs_lblcr */
+	int			sysctl_lblcr_expiration;
+	struct ctl_table_header	*lblcr_ctl_header;
+	struct ctl_table	*lblcr_ctl_table;
+	/* ip_vs_est */
+	struct list_head	est_list;	/* estimator list */
+	spinlock_t		est_lock;
+	struct timer_list	est_timer;	/* Estimation timer */
+	/* ip_vs_sync */
+	struct list_head	sync_queue;
+	spinlock_t		sync_lock;
+	struct ip_vs_sync_buff  *sync_buff;
+	spinlock_t		sync_buff_lock;
+	struct sockaddr_in	sync_mcast_addr;
+	struct task_struct	*master_thread;
+	struct task_struct	*backup_thread;
+	int			send_mesg_maxlen;
+	int			recv_mesg_maxlen;
+	volatile int		sync_state;
+	volatile int		master_syncid;
+	volatile int		backup_syncid;
+	struct mutex		sync_mutex;
+	/* multicast interface name */
+	char			master_mcast_ifn[IP_VS_IFNAME_MAXLEN];
+	char			backup_mcast_ifn[IP_VS_IFNAME_MAXLEN];
+	/* net name space ptr */
+	struct net		*net;            /* Needed by timer routines */
+};
+
+#define DEFAULT_SYNC_THRESHOLD	3
+#define DEFAULT_SYNC_PERIOD	50
+#define DEFAULT_SYNC_VER	1
+
+#ifdef CONFIG_SYSCTL
+
+static inline int sysctl_sync_threshold(struct netns_ipvs *ipvs)
+{
+	return ipvs->sysctl_sync_threshold[0];
+}
+
+static inline int sysctl_sync_period(struct netns_ipvs *ipvs)
+{
+	return ipvs->sysctl_sync_threshold[1];
+}
+
+static inline int sysctl_sync_ver(struct netns_ipvs *ipvs)
+{
+	return ipvs->sysctl_sync_ver;
+}
+
+#else
+
+static inline int sysctl_sync_threshold(struct netns_ipvs *ipvs)
+{
+	return DEFAULT_SYNC_THRESHOLD;
+}
+
+static inline int sysctl_sync_period(struct netns_ipvs *ipvs)
+{
+	return DEFAULT_SYNC_PERIOD;
+}
+
+static inline int sysctl_sync_ver(struct netns_ipvs *ipvs)
+{
+	return DEFAULT_SYNC_VER;
+}
+
+#endif
+
+/*
+ *      IPVS core functions
+ *      (from ip_vs_core.c)
+ */
+extern const char *ip_vs_proto_name(unsigned proto);
+extern void ip_vs_init_hash_table(struct list_head *table, int rows);
+#define IP_VS_INIT_HASH_TABLE(t) ip_vs_init_hash_table((t), ARRAY_SIZE((t)))
+
+#define IP_VS_APP_TYPE_FTP	1
+
+/*
+ *     ip_vs_conn handling functions
+ *     (from ip_vs_conn.c)
+ */
+
+enum {
+	IP_VS_DIR_INPUT = 0,
+	IP_VS_DIR_OUTPUT,
+	IP_VS_DIR_INPUT_ONLY,
+	IP_VS_DIR_LAST,
+};
+
+static inline void ip_vs_conn_fill_param(struct net *net, int af, int protocol,
+					 const union nf_inet_addr *caddr,
+					 __be16 cport,
+					 const union nf_inet_addr *vaddr,
+					 __be16 vport,
+					 struct ip_vs_conn_param *p)
+{
+	p->net = net;
+	p->af = af;
+	p->protocol = protocol;
+	p->caddr = caddr;
+	p->cport = cport;
+	p->vaddr = vaddr;
+	p->vport = vport;
+	p->pe = NULL;
+	p->pe_data = NULL;
+}
+
+struct ip_vs_conn *ip_vs_conn_in_get(const struct ip_vs_conn_param *p);
+struct ip_vs_conn *ip_vs_ct_in_get(const struct ip_vs_conn_param *p);
+
+struct ip_vs_conn * ip_vs_conn_in_get_proto(int af, const struct sk_buff *skb,
+					    const struct ip_vs_iphdr *iph,
+					    unsigned int proto_off,
+					    int inverse);
+
+struct ip_vs_conn *ip_vs_conn_out_get(const struct ip_vs_conn_param *p);
+
+struct ip_vs_conn * ip_vs_conn_out_get_proto(int af, const struct sk_buff *skb,
+					     const struct ip_vs_iphdr *iph,
+					     unsigned int proto_off,
+					     int inverse);
+
+/* put back the conn without restarting its timer */
+static inline void __ip_vs_conn_put(struct ip_vs_conn *cp)
+{
+	atomic_dec(&cp->refcnt);
+}
+extern void ip_vs_conn_put(struct ip_vs_conn *cp);
+extern void ip_vs_conn_fill_cport(struct ip_vs_conn *cp, __be16 cport);
+
+struct ip_vs_conn *ip_vs_conn_new(const struct ip_vs_conn_param *p,
+				  const union nf_inet_addr *daddr,
+				  __be16 dport, unsigned flags,
+				  struct ip_vs_dest *dest, __u32 fwmark);
+extern void ip_vs_conn_expire_now(struct ip_vs_conn *cp);
+
+extern const char * ip_vs_state_name(__u16 proto, int state);
+
+extern void ip_vs_tcp_conn_listen(struct net *net, struct ip_vs_conn *cp);
+extern int ip_vs_check_template(struct ip_vs_conn *ct);
+extern void ip_vs_random_dropentry(struct net *net);
+extern int ip_vs_conn_init(void);
+extern void ip_vs_conn_cleanup(void);
+
+static inline void ip_vs_control_del(struct ip_vs_conn *cp)
+{
+	struct ip_vs_conn *ctl_cp = cp->control;
+	if (!ctl_cp) {
+		IP_VS_ERR_BUF("request control DEL for uncontrolled: "
+			      "%s:%d to %s:%d\n",
+			      IP_VS_DBG_ADDR(cp->af, &cp->caddr),
+			      ntohs(cp->cport),
+			      IP_VS_DBG_ADDR(cp->af, &cp->vaddr),
+			      ntohs(cp->vport));
+
+		return;
+	}
+
+	IP_VS_DBG_BUF(7, "DELeting control for: "
+		      "cp.dst=%s:%d ctl_cp.dst=%s:%d\n",
+		      IP_VS_DBG_ADDR(cp->af, &cp->caddr),
+		      ntohs(cp->cport),
+		      IP_VS_DBG_ADDR(cp->af, &ctl_cp->caddr),
+		      ntohs(ctl_cp->cport));
+
+	cp->control = NULL;
+	if (atomic_read(&ctl_cp->n_control) == 0) {
+		IP_VS_ERR_BUF("BUG control DEL with n=0 : "
+			      "%s:%d to %s:%d\n",
+			      IP_VS_DBG_ADDR(cp->af, &cp->caddr),
+			      ntohs(cp->cport),
+			      IP_VS_DBG_ADDR(cp->af, &cp->vaddr),
+			      ntohs(cp->vport));
+
+		return;
+	}
+	atomic_dec(&ctl_cp->n_control);
+}
+
+static inline void
+ip_vs_control_add(struct ip_vs_conn *cp, struct ip_vs_conn *ctl_cp)
+{
+	if (cp->control) {
+		IP_VS_ERR_BUF("request control ADD for already controlled: "
+			      "%s:%d to %s:%d\n",
+			      IP_VS_DBG_ADDR(cp->af, &cp->caddr),
+			      ntohs(cp->cport),
+			      IP_VS_DBG_ADDR(cp->af, &cp->vaddr),
+			      ntohs(cp->vport));
+
+		ip_vs_control_del(cp);
+	}
+
+	IP_VS_DBG_BUF(7, "ADDing control for: "
+		      "cp.dst=%s:%d ctl_cp.dst=%s:%d\n",
+		      IP_VS_DBG_ADDR(cp->af, &cp->caddr),
+		      ntohs(cp->cport),
+		      IP_VS_DBG_ADDR(cp->af, &ctl_cp->caddr),
+		      ntohs(ctl_cp->cport));
+
+	cp->control = ctl_cp;
+	atomic_inc(&ctl_cp->n_control);
+}
+
+/*
+ * IPVS netns init & cleanup functions
+ */
+extern int ip_vs_estimator_net_init(struct net *net);
+extern int ip_vs_control_net_init(struct net *net);
+extern int ip_vs_protocol_net_init(struct net *net);
+extern int ip_vs_app_net_init(struct net *net);
+extern int ip_vs_conn_net_init(struct net *net);
+extern int ip_vs_sync_net_init(struct net *net);
+extern void ip_vs_conn_net_cleanup(struct net *net);
+extern void ip_vs_app_net_cleanup(struct net *net);
+extern void ip_vs_protocol_net_cleanup(struct net *net);
+extern void ip_vs_control_net_cleanup(struct net *net);
+extern void ip_vs_estimator_net_cleanup(struct net *net);
+extern void ip_vs_sync_net_cleanup(struct net *net);
+extern void ip_vs_service_net_cleanup(struct net *net);
+
+/*
+ *      IPVS application functions
+ *      (from ip_vs_app.c)
+ */
+#define IP_VS_APP_MAX_PORTS  8
+extern int register_ip_vs_app(struct net *net, struct ip_vs_app *app);
+extern void unregister_ip_vs_app(struct net *net, struct ip_vs_app *app);
+extern int ip_vs_bind_app(struct ip_vs_conn *cp, struct ip_vs_protocol *pp);
+extern void ip_vs_unbind_app(struct ip_vs_conn *cp);
+extern int register_ip_vs_app_inc(struct net *net, struct ip_vs_app *app,
+				  __u16 proto, __u16 port);
+extern int ip_vs_app_inc_get(struct ip_vs_app *inc);
+extern void ip_vs_app_inc_put(struct ip_vs_app *inc);
+
+extern int ip_vs_app_pkt_out(struct ip_vs_conn *, struct sk_buff *skb);
+extern int ip_vs_app_pkt_in(struct ip_vs_conn *, struct sk_buff *skb);
+
+void ip_vs_bind_pe(struct ip_vs_service *svc, struct ip_vs_pe *pe);
+void ip_vs_unbind_pe(struct ip_vs_service *svc);
+int register_ip_vs_pe(struct ip_vs_pe *pe);
+int unregister_ip_vs_pe(struct ip_vs_pe *pe);
+struct ip_vs_pe *ip_vs_pe_getbyname(const char *name);
+struct ip_vs_pe *__ip_vs_pe_getbyname(const char *pe_name);
+
+/*
+ * Use a #define to avoid all of module.h just for these trivial ops
+ */
+#define ip_vs_pe_get(pe)			\
+	if (pe && pe->module)			\
+		__module_get(pe->module);
+
+#define ip_vs_pe_put(pe)			\
+	if (pe && pe->module)			\
+		module_put(pe->module);
+
+/*
+ *	IPVS protocol functions (from ip_vs_proto.c)
+ */
+extern int ip_vs_protocol_init(void);
+extern void ip_vs_protocol_cleanup(void);
+extern void ip_vs_protocol_timeout_change(struct netns_ipvs *ipvs, int flags);
+extern int *ip_vs_create_timeout_table(int *table, int size);
+extern int
+ip_vs_set_state_timeout(int *table, int num, const char *const *names,
+			const char *name, int to);
+extern void
+ip_vs_tcpudp_debug_packet(int af, struct ip_vs_protocol *pp,
+			  const struct sk_buff *skb,
+			  int offset, const char *msg);
+
+extern struct ip_vs_protocol ip_vs_protocol_tcp;
+extern struct ip_vs_protocol ip_vs_protocol_udp;
+extern struct ip_vs_protocol ip_vs_protocol_icmp;
+extern struct ip_vs_protocol ip_vs_protocol_esp;
+extern struct ip_vs_protocol ip_vs_protocol_ah;
+extern struct ip_vs_protocol ip_vs_protocol_sctp;
+
+/*
+ *      Registering/unregistering scheduler functions
+ *      (from ip_vs_sched.c)
+ */
+extern int register_ip_vs_scheduler(struct ip_vs_scheduler *scheduler);
+extern int unregister_ip_vs_scheduler(struct ip_vs_scheduler *scheduler);
+extern int ip_vs_bind_scheduler(struct ip_vs_service *svc,
+				struct ip_vs_scheduler *scheduler);
+extern int ip_vs_unbind_scheduler(struct ip_vs_service *svc);
+extern struct ip_vs_scheduler *ip_vs_scheduler_get(const char *sched_name);
+extern void ip_vs_scheduler_put(struct ip_vs_scheduler *scheduler);
+extern struct ip_vs_conn *
+ip_vs_schedule(struct ip_vs_service *svc, struct sk_buff *skb,
+	       struct ip_vs_proto_data *pd, int *ignored);
+extern int ip_vs_leave(struct ip_vs_service *svc, struct sk_buff *skb,
+			struct ip_vs_proto_data *pd);
+
+extern void ip_vs_scheduler_err(struct ip_vs_service *svc, const char *msg);
+
+
+/*
+ *      IPVS control data and functions (from ip_vs_ctl.c)
+ */
+extern struct ip_vs_stats ip_vs_stats;
+extern const struct ctl_path net_vs_ctl_path[];
+extern int sysctl_ip_vs_sync_ver;
+
+extern void ip_vs_sync_switch_mode(struct net *net, int mode);
+extern struct ip_vs_service *
+ip_vs_service_get(struct net *net, int af, __u32 fwmark, __u16 protocol,
+		  const union nf_inet_addr *vaddr, __be16 vport);
+
+static inline void ip_vs_service_put(struct ip_vs_service *svc)
+{
+	atomic_dec(&svc->usecnt);
+}
+
+extern struct ip_vs_dest *
+ip_vs_lookup_real_service(struct net *net, int af, __u16 protocol,
+			  const union nf_inet_addr *daddr, __be16 dport);
+
+extern int ip_vs_use_count_inc(void);
+extern void ip_vs_use_count_dec(void);
+extern int ip_vs_register_nl_ioctl(void);
+extern void ip_vs_unregister_nl_ioctl(void);
+extern int ip_vs_control_init(void);
+extern void ip_vs_control_cleanup(void);
+extern struct ip_vs_dest *
+ip_vs_find_dest(struct net *net, int af, const union nf_inet_addr *daddr,
+		__be16 dport, const union nf_inet_addr *vaddr, __be16 vport,
+		__u16 protocol, __u32 fwmark, __u32 flags);
+extern struct ip_vs_dest *ip_vs_try_bind_dest(struct ip_vs_conn *cp);
+
+
+/*
+ *      IPVS sync daemon data and function prototypes
+ *      (from ip_vs_sync.c)
+ */
+extern int start_sync_thread(struct net *net, int state, char *mcast_ifn,
+			     __u8 syncid);
+extern int stop_sync_thread(struct net *net, int state);
+extern void ip_vs_sync_conn(struct net *net, struct ip_vs_conn *cp);
+
+
+/*
+ *      IPVS rate estimator prototypes (from ip_vs_est.c)
+ */
+extern void ip_vs_start_estimator(struct net *net, struct ip_vs_stats *stats);
+extern void ip_vs_stop_estimator(struct net *net, struct ip_vs_stats *stats);
+extern void ip_vs_zero_estimator(struct ip_vs_stats *stats);
+extern void ip_vs_read_estimator(struct ip_vs_stats_user *dst,
+				 struct ip_vs_stats *stats);
+
+/*
+ *	Various IPVS packet transmitters (from ip_vs_xmit.c)
+ */
+extern int ip_vs_null_xmit
+(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp);
+extern int ip_vs_bypass_xmit
+(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp);
+extern int ip_vs_nat_xmit
+(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp);
+extern int ip_vs_tunnel_xmit
+(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp);
+extern int ip_vs_dr_xmit
+(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp);
+extern int ip_vs_icmp_xmit
+(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp,
+ int offset, unsigned int hooknum);
+extern void ip_vs_dst_reset(struct ip_vs_dest *dest);
+
+#ifdef CONFIG_IP_VS_IPV6
+extern int ip_vs_bypass_xmit_v6
+(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp);
+extern int ip_vs_nat_xmit_v6
+(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp);
+extern int ip_vs_tunnel_xmit_v6
+(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp);
+extern int ip_vs_dr_xmit_v6
+(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp);
+extern int ip_vs_icmp_xmit_v6
+(struct sk_buff *skb, struct ip_vs_conn *cp, struct ip_vs_protocol *pp,
+ int offset, unsigned int hooknum);
+#endif
+
+#ifdef CONFIG_SYSCTL
+/*
+ *	This is a simple mechanism to ignore packets when
+ *	we are loaded. Just set ip_vs_drop_rate to 'n' and
+ *	we start to drop 1/rate of the packets
+ */
+
+static inline int ip_vs_todrop(struct netns_ipvs *ipvs)
+{
+	if (!ipvs->drop_rate)
+		return 0;
+	if (--ipvs->drop_counter > 0)
+		return 0;
+	ipvs->drop_counter = ipvs->drop_rate;
+	return 1;
+}
+#else
+static inline int ip_vs_todrop(struct netns_ipvs *ipvs) { return 0; }
+#endif
+
+/*
+ *      ip_vs_fwd_tag returns the forwarding tag of the connection
+ */
+#define IP_VS_FWD_METHOD(cp)  (cp->flags & IP_VS_CONN_F_FWD_MASK)
+
+static inline char ip_vs_fwd_tag(struct ip_vs_conn *cp)
+{
+	char fwd;
+
+	switch (IP_VS_FWD_METHOD(cp)) {
+	case IP_VS_CONN_F_MASQ:
+		fwd = 'M'; break;
+	case IP_VS_CONN_F_LOCALNODE:
+		fwd = 'L'; break;
+	case IP_VS_CONN_F_TUNNEL:
+		fwd = 'T'; break;
+	case IP_VS_CONN_F_DROUTE:
+		fwd = 'R'; break;
+	case IP_VS_CONN_F_BYPASS:
+		fwd = 'B'; break;
+	default:
+		fwd = '?'; break;
+	}
+	return fwd;
+}
+
+extern void ip_vs_nat_icmp(struct sk_buff *skb, struct ip_vs_protocol *pp,
+			   struct ip_vs_conn *cp, int dir);
+
+#ifdef CONFIG_IP_VS_IPV6
+extern void ip_vs_nat_icmp_v6(struct sk_buff *skb, struct ip_vs_protocol *pp,
+			      struct ip_vs_conn *cp, int dir);
+#endif
+
+extern __sum16 ip_vs_checksum_complete(struct sk_buff *skb, int offset);
+
+static inline __wsum ip_vs_check_diff4(__be32 old, __be32 new, __wsum oldsum)
+{
+	__be32 diff[2] = { ~old, new };
+
+	return csum_partial(diff, sizeof(diff), oldsum);
+}
+
+#ifdef CONFIG_IP_VS_IPV6
+static inline __wsum ip_vs_check_diff16(const __be32 *old, const __be32 *new,
+					__wsum oldsum)
+{
+	__be32 diff[8] = { ~old[3], ~old[2], ~old[1], ~old[0],
+			    new[3],  new[2],  new[1],  new[0] };
+
+	return csum_partial(diff, sizeof(diff), oldsum);
+}
+#endif
+
+static inline __wsum ip_vs_check_diff2(__be16 old, __be16 new, __wsum oldsum)
+{
+	__be16 diff[2] = { ~old, new };
+
+	return csum_partial(diff, sizeof(diff), oldsum);
+}
+
+/*
+ * Forget current conntrack (unconfirmed) and attach notrack entry
+ */
+static inline void ip_vs_notrack(struct sk_buff *skb)
+{
+#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
+	enum ip_conntrack_info ctinfo;
+	struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
+
+	if (!ct || !nf_ct_is_untracked(ct)) {
+		nf_reset(skb);
+		skb->nfct = &nf_ct_untracked_get()->ct_general;
+		skb->nfctinfo = IP_CT_NEW;
+		nf_conntrack_get(skb->nfct);
+	}
+#endif
+}
+
+#ifdef CONFIG_IP_VS_NFCT
+/*
+ *      Netfilter connection tracking
+ *      (from ip_vs_nfct.c)
+ */
+static inline int ip_vs_conntrack_enabled(struct netns_ipvs *ipvs)
+{
+#ifdef CONFIG_SYSCTL
+	return ipvs->sysctl_conntrack;
+#else
+	return 0;
+#endif
+}
+
+extern void ip_vs_update_conntrack(struct sk_buff *skb, struct ip_vs_conn *cp,
+				   int outin);
+extern int ip_vs_confirm_conntrack(struct sk_buff *skb);
+extern void ip_vs_nfct_expect_related(struct sk_buff *skb, struct nf_conn *ct,
+				      struct ip_vs_conn *cp, u_int8_t proto,
+				      const __be16 port, int from_rs);
+extern void ip_vs_conn_drop_conntrack(struct ip_vs_conn *cp);
+
+#else
+
+static inline int ip_vs_conntrack_enabled(struct netns_ipvs *ipvs)
+{
+	return 0;
+}
+
+static inline void ip_vs_update_conntrack(struct sk_buff *skb,
+					  struct ip_vs_conn *cp, int outin)
+{
+}
+
+static inline int ip_vs_confirm_conntrack(struct sk_buff *skb)
+{
+	return NF_ACCEPT;
+}
+
+static inline void ip_vs_conn_drop_conntrack(struct ip_vs_conn *cp)
+{
+}
+/* CONFIG_IP_VS_NFCT */
+#endif
+
+static inline unsigned int
+ip_vs_dest_conn_overhead(struct ip_vs_dest *dest)
+{
+	/*
+	 * We think the overhead of processing active connections is 256
+	 * times higher than that of inactive connections in average. (This
+	 * 256 times might not be accurate, we will change it later) We
+	 * use the following formula to estimate the overhead now:
+	 *		  dest->activeconns*256 + dest->inactconns
+	 */
+	return (atomic_read(&dest->activeconns) << 8) +
+		atomic_read(&dest->inactconns);
+}
+
+#endif	/* _NET_IP_VS_H */
diff --git a/include/net/ipcomp.h b/include/net/ipcomp.h
new file mode 100644
index 00000000..cc4f30cd
--- /dev/null
+++ b/include/net/ipcomp.h
@@ -0,0 +1,29 @@
+#ifndef _NET_IPCOMP_H
+#define _NET_IPCOMP_H
+
+#include <linux/types.h>
+
+#define IPCOMP_SCRATCH_SIZE     65400
+
+struct crypto_comp;
+
+struct ipcomp_data {
+	u16 threshold;
+	struct crypto_comp * __percpu *tfms;
+};
+
+struct ip_comp_hdr;
+struct sk_buff;
+struct xfrm_state;
+
+int ipcomp_input(struct xfrm_state *x, struct sk_buff *skb);
+int ipcomp_output(struct xfrm_state *x, struct sk_buff *skb);
+void ipcomp_destroy(struct xfrm_state *x);
+int ipcomp_init_state(struct xfrm_state *x);
+
+static inline struct ip_comp_hdr *ip_comp_hdr(const struct sk_buff *skb)
+{
+	return (struct ip_comp_hdr *)skb_transport_header(skb);
+}
+
+#endif
diff --git a/include/net/ipconfig.h b/include/net/ipconfig.h
new file mode 100644
index 00000000..c74cc1bd
--- /dev/null
+++ b/include/net/ipconfig.h
@@ -0,0 +1,25 @@
+/*
+ *  Copyright (C) 1997 Martin Mares
+ *
+ *  Automatic IP Layer Configuration
+ */
+
+/* The following are initdata: */
+
+extern int ic_proto_enabled;	/* Protocols enabled (see IC_xxx) */
+extern int ic_set_manually;	/* IPconfig parameters set manually */
+
+extern __be32 ic_myaddr;		/* My IP address */
+extern __be32 ic_gateway;		/* Gateway IP address */
+
+extern __be32 ic_servaddr;		/* Boot server IP address */
+
+extern __be32 root_server_addr;	/* Address of NFS server */
+extern u8 root_server_path[];	/* Path to mount as root */
+
+
+/* bits in ic_proto_{enabled,used} */
+#define IC_PROTO	0xFF	/* Protocols mask: */
+#define IC_BOOTP	0x01	/*   BOOTP (or DHCP, see below) */
+#define IC_RARP		0x02	/*   RARP */
+#define IC_USE_DHCP    0x100	/* If on, use DHCP instead of BOOTP */
diff --git a/include/net/ipip.h b/include/net/ipip.h
new file mode 100644
index 00000000..a32654d5
--- /dev/null
+++ b/include/net/ipip.h
@@ -0,0 +1,67 @@
+#ifndef __NET_IPIP_H
+#define __NET_IPIP_H 1
+
+#include <linux/if_tunnel.h>
+#include <net/ip.h>
+
+/* Keep error state on tunnel for 30 sec */
+#define IPTUNNEL_ERR_TIMEO	(30*HZ)
+
+/* 6rd prefix/relay information */
+struct ip_tunnel_6rd_parm {
+	struct in6_addr		prefix;
+	__be32			relay_prefix;
+	u16			prefixlen;
+	u16			relay_prefixlen;
+};
+
+struct ip_tunnel {
+	struct ip_tunnel __rcu	*next;
+	struct net_device	*dev;
+
+	int			err_count;	/* Number of arrived ICMP errors */
+	unsigned long		err_time;	/* Time when the last ICMP error arrived */
+
+	/* These four fields used only by GRE */
+	__u32			i_seqno;	/* The last seen seqno	*/
+	__u32			o_seqno;	/* The last output seqno */
+	int			hlen;		/* Precalculated GRE header length */
+	int			mlink;
+
+	struct ip_tunnel_parm	parms;
+
+	/* for SIT */
+#ifdef CONFIG_IPV6_SIT_6RD
+	struct ip_tunnel_6rd_parm	ip6rd;
+#endif
+	struct ip_tunnel_prl_entry __rcu *prl;		/* potential router list */
+	unsigned int			prl_count;	/* # of entries in PRL */
+};
+
+struct ip_tunnel_prl_entry {
+	struct ip_tunnel_prl_entry __rcu *next;
+	__be32				addr;
+	u16				flags;
+	struct rcu_head			rcu_head;
+};
+
+#define __IPTUNNEL_XMIT(stats1, stats2) do {				\
+	int err;							\
+	int pkt_len = skb->len - skb_transport_offset(skb);		\
+									\
+	skb->ip_summed = CHECKSUM_NONE;					\
+	ip_select_ident(iph, &rt->dst, NULL);				\
+									\
+	err = ip_local_out(skb);					\
+	if (likely(net_xmit_eval(err) == 0)) {				\
+		(stats1)->tx_bytes += pkt_len;				\
+		(stats1)->tx_packets++;					\
+	} else {							\
+		(stats2)->tx_errors++;					\
+		(stats2)->tx_aborted_errors++;				\
+	}								\
+} while (0)
+
+#define IPTUNNEL_XMIT() __IPTUNNEL_XMIT(txq, stats)
+
+#endif
diff --git a/include/net/ipv6.h b/include/net/ipv6.h
new file mode 100644
index 00000000..a5a9e4df
--- /dev/null
+++ b/include/net/ipv6.h
@@ -0,0 +1,688 @@
+/*
+ *	Linux INET6 implementation
+ *
+ *	Authors:
+ *	Pedro Roque		<roque@di.fc.ul.pt>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _NET_IPV6_H
+#define _NET_IPV6_H
+
+#include <linux/ipv6.h>
+#include <linux/hardirq.h>
+#include <net/if_inet6.h>
+#include <net/ndisc.h>
+#include <net/flow.h>
+#include <net/snmp.h>
+
+#define SIN6_LEN_RFC2133	24
+
+#define IPV6_MAXPLEN		65535
+
+/*
+ *	NextHeader field of IPv6 header
+ */
+
+#define NEXTHDR_HOP		0	/* Hop-by-hop option header. */
+#define NEXTHDR_TCP		6	/* TCP segment. */
+#define NEXTHDR_UDP		17	/* UDP message. */
+#define NEXTHDR_IPV6		41	/* IPv6 in IPv6 */
+#define NEXTHDR_ROUTING		43	/* Routing header. */
+#define NEXTHDR_FRAGMENT	44	/* Fragmentation/reassembly header. */
+#define NEXTHDR_ESP		50	/* Encapsulating security payload. */
+#define NEXTHDR_AUTH		51	/* Authentication header. */
+#define NEXTHDR_ICMP		58	/* ICMP for IPv6. */
+#define NEXTHDR_NONE		59	/* No next header */
+#define NEXTHDR_DEST		60	/* Destination options header. */
+#define NEXTHDR_MOBILITY	135	/* Mobility header. */
+
+#define NEXTHDR_MAX		255
+
+
+
+#define IPV6_DEFAULT_HOPLIMIT   64
+#define IPV6_DEFAULT_MCASTHOPS	1
+
+/*
+ *	Addr type
+ *	
+ *	type	-	unicast | multicast
+ *	scope	-	local	| site	    | global
+ *	v4	-	compat
+ *	v4mapped
+ *	any
+ *	loopback
+ */
+
+#define IPV6_ADDR_ANY		0x0000U
+
+#define IPV6_ADDR_UNICAST      	0x0001U	
+#define IPV6_ADDR_MULTICAST    	0x0002U	
+
+#define IPV6_ADDR_LOOPBACK	0x0010U
+#define IPV6_ADDR_LINKLOCAL	0x0020U
+#define IPV6_ADDR_SITELOCAL	0x0040U
+
+#define IPV6_ADDR_COMPATv4	0x0080U
+
+#define IPV6_ADDR_SCOPE_MASK	0x00f0U
+
+#define IPV6_ADDR_MAPPED	0x1000U
+
+/*
+ *	Addr scopes
+ */
+#define IPV6_ADDR_MC_SCOPE(a)	\
+	((a)->s6_addr[1] & 0x0f)	/* nonstandard */
+#define __IPV6_ADDR_SCOPE_INVALID	-1
+#define IPV6_ADDR_SCOPE_NODELOCAL	0x01
+#define IPV6_ADDR_SCOPE_LINKLOCAL	0x02
+#define IPV6_ADDR_SCOPE_SITELOCAL	0x05
+#define IPV6_ADDR_SCOPE_ORGLOCAL	0x08
+#define IPV6_ADDR_SCOPE_GLOBAL		0x0e
+
+/*
+ *	Addr flags
+ */
+#define IPV6_ADDR_MC_FLAG_TRANSIENT(a)	\
+	((a)->s6_addr[1] & 0x10)
+#define IPV6_ADDR_MC_FLAG_PREFIX(a)	\
+	((a)->s6_addr[1] & 0x20)
+#define IPV6_ADDR_MC_FLAG_RENDEZVOUS(a)	\
+	((a)->s6_addr[1] & 0x40)
+
+/*
+ *	fragmentation header
+ */
+
+struct frag_hdr {
+	__u8	nexthdr;
+	__u8	reserved;
+	__be16	frag_off;
+	__be32	identification;
+};
+
+#define	IP6_MF	0x0001
+
+#include <net/sock.h>
+
+/* sysctls */
+extern int sysctl_mld_max_msf;
+extern struct ctl_path net_ipv6_ctl_path[];
+
+#define _DEVINC(net, statname, modifier, idev, field)			\
+({									\
+	struct inet6_dev *_idev = (idev);				\
+	if (likely(_idev != NULL))					\
+		SNMP_INC_STATS##modifier((_idev)->stats.statname, (field)); \
+	SNMP_INC_STATS##modifier((net)->mib.statname##_statistics, (field));\
+})
+
+/* per device counters are atomic_long_t */
+#define _DEVINCATOMIC(net, statname, modifier, idev, field)		\
+({									\
+	struct inet6_dev *_idev = (idev);				\
+	if (likely(_idev != NULL))					\
+		SNMP_INC_STATS_ATOMIC_LONG((_idev)->stats.statname##dev, (field)); \
+	SNMP_INC_STATS##modifier((net)->mib.statname##_statistics, (field));\
+})
+
+/* per device and per net counters are atomic_long_t */
+#define _DEVINC_ATOMIC_ATOMIC(net, statname, idev, field)		\
+({									\
+	struct inet6_dev *_idev = (idev);				\
+	if (likely(_idev != NULL))					\
+		SNMP_INC_STATS_ATOMIC_LONG((_idev)->stats.statname##dev, (field)); \
+	SNMP_INC_STATS_ATOMIC_LONG((net)->mib.statname##_statistics, (field));\
+})
+
+#define _DEVADD(net, statname, modifier, idev, field, val)		\
+({									\
+	struct inet6_dev *_idev = (idev);				\
+	if (likely(_idev != NULL))					\
+		SNMP_ADD_STATS##modifier((_idev)->stats.statname, (field), (val)); \
+	SNMP_ADD_STATS##modifier((net)->mib.statname##_statistics, (field), (val));\
+})
+
+#define _DEVUPD(net, statname, modifier, idev, field, val)		\
+({									\
+	struct inet6_dev *_idev = (idev);				\
+	if (likely(_idev != NULL))					\
+		SNMP_UPD_PO_STATS##modifier((_idev)->stats.statname, field, (val)); \
+	SNMP_UPD_PO_STATS##modifier((net)->mib.statname##_statistics, field, (val));\
+})
+
+/* MIBs */
+
+#define IP6_INC_STATS(net, idev,field)		\
+		_DEVINC(net, ipv6, 64, idev, field)
+#define IP6_INC_STATS_BH(net, idev,field)	\
+		_DEVINC(net, ipv6, 64_BH, idev, field)
+#define IP6_ADD_STATS(net, idev,field,val)	\
+		_DEVADD(net, ipv6, 64, idev, field, val)
+#define IP6_ADD_STATS_BH(net, idev,field,val)	\
+		_DEVADD(net, ipv6, 64_BH, idev, field, val)
+#define IP6_UPD_PO_STATS(net, idev,field,val)   \
+		_DEVUPD(net, ipv6, 64, idev, field, val)
+#define IP6_UPD_PO_STATS_BH(net, idev,field,val)   \
+		_DEVUPD(net, ipv6, 64_BH, idev, field, val)
+#define ICMP6_INC_STATS(net, idev, field)	\
+		_DEVINCATOMIC(net, icmpv6, , idev, field)
+#define ICMP6_INC_STATS_BH(net, idev, field)	\
+		_DEVINCATOMIC(net, icmpv6, _BH, idev, field)
+
+#define ICMP6MSGOUT_INC_STATS(net, idev, field)		\
+	_DEVINC_ATOMIC_ATOMIC(net, icmpv6msg, idev, field +256)
+#define ICMP6MSGOUT_INC_STATS_BH(net, idev, field)	\
+	_DEVINC_ATOMIC_ATOMIC(net, icmpv6msg, idev, field +256)
+#define ICMP6MSGIN_INC_STATS_BH(net, idev, field)	\
+	_DEVINC_ATOMIC_ATOMIC(net, icmpv6msg, idev, field)
+
+struct ip6_ra_chain {
+	struct ip6_ra_chain	*next;
+	struct sock		*sk;
+	int			sel;
+	void			(*destructor)(struct sock *);
+};
+
+extern struct ip6_ra_chain	*ip6_ra_chain;
+extern rwlock_t ip6_ra_lock;
+
+/*
+   This structure is prepared by protocol, when parsing
+   ancillary data and passed to IPv6.
+ */
+
+struct ipv6_txoptions {
+	/* Length of this structure */
+	int			tot_len;
+
+	/* length of extension headers   */
+
+	__u16			opt_flen;	/* after fragment hdr */
+	__u16			opt_nflen;	/* before fragment hdr */
+
+	struct ipv6_opt_hdr	*hopopt;
+	struct ipv6_opt_hdr	*dst0opt;
+	struct ipv6_rt_hdr	*srcrt;	/* Routing Header */
+	struct ipv6_opt_hdr	*dst1opt;
+
+	/* Option buffer, as read by IPV6_PKTOPTIONS, starts here. */
+};
+
+struct ip6_flowlabel {
+	struct ip6_flowlabel	*next;
+	__be32			label;
+	atomic_t		users;
+	struct in6_addr		dst;
+	struct ipv6_txoptions	*opt;
+	unsigned long		linger;
+	u8			share;
+	u32			owner;
+	unsigned long		lastuse;
+	unsigned long		expires;
+	struct net		*fl_net;
+};
+
+#define IPV6_FLOWINFO_MASK	cpu_to_be32(0x0FFFFFFF)
+#define IPV6_FLOWLABEL_MASK	cpu_to_be32(0x000FFFFF)
+
+struct ipv6_fl_socklist {
+	struct ipv6_fl_socklist	*next;
+	struct ip6_flowlabel	*fl;
+};
+
+extern struct ip6_flowlabel	*fl6_sock_lookup(struct sock *sk, __be32 label);
+extern struct ipv6_txoptions	*fl6_merge_options(struct ipv6_txoptions * opt_space,
+						   struct ip6_flowlabel * fl,
+						   struct ipv6_txoptions * fopt);
+extern void			fl6_free_socklist(struct sock *sk);
+extern int			ipv6_flowlabel_opt(struct sock *sk, char __user *optval, int optlen);
+extern int			ip6_flowlabel_init(void);
+extern void			ip6_flowlabel_cleanup(void);
+
+static inline void fl6_sock_release(struct ip6_flowlabel *fl)
+{
+	if (fl)
+		atomic_dec(&fl->users);
+}
+
+extern void icmpv6_notify(struct sk_buff *skb, u8 type, u8 code, __be32 info);
+
+int icmpv6_push_pending_frames(struct sock *sk, struct flowi6 *fl6,
+			       struct icmp6hdr *thdr, int len);
+
+struct dst_entry *icmpv6_route_lookup(struct net *net, struct sk_buff *skb,
+				      struct sock *sk, struct flowi6 *fl6);
+
+extern int 			ip6_ra_control(struct sock *sk, int sel);
+
+extern int			ipv6_parse_hopopts(struct sk_buff *skb);
+
+extern struct ipv6_txoptions *  ipv6_dup_options(struct sock *sk, struct ipv6_txoptions *opt);
+extern struct ipv6_txoptions *	ipv6_renew_options(struct sock *sk, struct ipv6_txoptions *opt,
+						   int newtype,
+						   struct ipv6_opt_hdr __user *newopt,
+						   int newoptlen);
+struct ipv6_txoptions *ipv6_fixup_options(struct ipv6_txoptions *opt_space,
+					  struct ipv6_txoptions *opt);
+
+extern int ipv6_opt_accepted(struct sock *sk, struct sk_buff *skb);
+
+int ip6_frag_nqueues(struct net *net);
+int ip6_frag_mem(struct net *net);
+
+#define IPV6_FRAG_HIGH_THRESH	(256 * 1024)	/* 262144 */
+#define IPV6_FRAG_LOW_THRESH	(192 * 1024)	/* 196608 */
+#define IPV6_FRAG_TIMEOUT	(60 * HZ)	/* 60 seconds */
+
+extern int __ipv6_addr_type(const struct in6_addr *addr);
+static inline int ipv6_addr_type(const struct in6_addr *addr)
+{
+	return __ipv6_addr_type(addr) & 0xffff;
+}
+
+static inline int ipv6_addr_scope(const struct in6_addr *addr)
+{
+	return __ipv6_addr_type(addr) & IPV6_ADDR_SCOPE_MASK;
+}
+
+static inline int __ipv6_addr_src_scope(int type)
+{
+	return (type == IPV6_ADDR_ANY) ? __IPV6_ADDR_SCOPE_INVALID : (type >> 16);
+}
+
+static inline int ipv6_addr_src_scope(const struct in6_addr *addr)
+{
+	return __ipv6_addr_src_scope(__ipv6_addr_type(addr));
+}
+
+static inline bool __ipv6_addr_needs_scope_id(int type)
+{
+	return type & IPV6_ADDR_LINKLOCAL ||
+	       (type & IPV6_ADDR_MULTICAST &&
+		(type & (IPV6_ADDR_LOOPBACK|IPV6_ADDR_LINKLOCAL)));
+}
+
+static inline __u32 ipv6_iface_scope_id(const struct in6_addr *addr, int iface)
+{
+	return __ipv6_addr_needs_scope_id(__ipv6_addr_type(addr)) ? iface : 0;
+}
+
+static inline int ipv6_addr_cmp(const struct in6_addr *a1, const struct in6_addr *a2)
+{
+	return memcmp(a1, a2, sizeof(struct in6_addr));
+}
+
+static inline int
+ipv6_masked_addr_cmp(const struct in6_addr *a1, const struct in6_addr *m,
+		     const struct in6_addr *a2)
+{
+	return !!(((a1->s6_addr32[0] ^ a2->s6_addr32[0]) & m->s6_addr32[0]) |
+		  ((a1->s6_addr32[1] ^ a2->s6_addr32[1]) & m->s6_addr32[1]) |
+		  ((a1->s6_addr32[2] ^ a2->s6_addr32[2]) & m->s6_addr32[2]) |
+		  ((a1->s6_addr32[3] ^ a2->s6_addr32[3]) & m->s6_addr32[3]));
+}
+
+static inline void ipv6_addr_prefix(struct in6_addr *pfx, 
+				    const struct in6_addr *addr,
+				    int plen)
+{
+	/* caller must guarantee 0 <= plen <= 128 */
+	int o = plen >> 3,
+	    b = plen & 0x7;
+
+	memset(pfx->s6_addr, 0, sizeof(pfx->s6_addr));
+	memcpy(pfx->s6_addr, addr, o);
+	if (b != 0)
+		pfx->s6_addr[o] = addr->s6_addr[o] & (0xff00 >> b);
+}
+
+static inline void ipv6_addr_set(struct in6_addr *addr, 
+				     __be32 w1, __be32 w2,
+				     __be32 w3, __be32 w4)
+{
+	addr->s6_addr32[0] = w1;
+	addr->s6_addr32[1] = w2;
+	addr->s6_addr32[2] = w3;
+	addr->s6_addr32[3] = w4;
+}
+
+static inline int ipv6_addr_equal(const struct in6_addr *a1,
+				  const struct in6_addr *a2)
+{
+	return ((a1->s6_addr32[0] ^ a2->s6_addr32[0]) |
+		(a1->s6_addr32[1] ^ a2->s6_addr32[1]) |
+		(a1->s6_addr32[2] ^ a2->s6_addr32[2]) |
+		(a1->s6_addr32[3] ^ a2->s6_addr32[3])) == 0;
+}
+
+static inline int __ipv6_prefix_equal(const __be32 *a1, const __be32 *a2,
+				      unsigned int prefixlen)
+{
+	unsigned pdw, pbi;
+
+	/* check complete u32 in prefix */
+	pdw = prefixlen >> 5;
+	if (pdw && memcmp(a1, a2, pdw << 2))
+		return 0;
+
+	/* check incomplete u32 in prefix */
+	pbi = prefixlen & 0x1f;
+	if (pbi && ((a1[pdw] ^ a2[pdw]) & htonl((0xffffffff) << (32 - pbi))))
+		return 0;
+
+	return 1;
+}
+
+static inline int ipv6_prefix_equal(const struct in6_addr *a1,
+				    const struct in6_addr *a2,
+				    unsigned int prefixlen)
+{
+	return __ipv6_prefix_equal(a1->s6_addr32, a2->s6_addr32,
+				   prefixlen);
+}
+
+struct inet_frag_queue;
+
+enum ip6_defrag_users {
+	IP6_DEFRAG_LOCAL_DELIVER,
+	IP6_DEFRAG_CONNTRACK_IN,
+	__IP6_DEFRAG_CONNTRACK_IN	= IP6_DEFRAG_CONNTRACK_IN + USHRT_MAX,
+	IP6_DEFRAG_CONNTRACK_OUT,
+	__IP6_DEFRAG_CONNTRACK_OUT	= IP6_DEFRAG_CONNTRACK_OUT + USHRT_MAX,
+	IP6_DEFRAG_CONNTRACK_BRIDGE_IN,
+	__IP6_DEFRAG_CONNTRACK_BRIDGE_IN = IP6_DEFRAG_CONNTRACK_BRIDGE_IN + USHRT_MAX,
+};
+
+struct ip6_create_arg {
+	__be32 id;
+	u32 user;
+	const struct in6_addr *src;
+	const struct in6_addr *dst;
+};
+
+void ip6_frag_init(struct inet_frag_queue *q, void *a);
+int ip6_frag_match(struct inet_frag_queue *q, void *a);
+
+static inline int ipv6_addr_any(const struct in6_addr *a)
+{
+	return (a->s6_addr32[0] | a->s6_addr32[1] |
+		a->s6_addr32[2] | a->s6_addr32[3]) == 0;
+}
+
+static inline int ipv6_addr_loopback(const struct in6_addr *a)
+{
+	return (a->s6_addr32[0] | a->s6_addr32[1] |
+		a->s6_addr32[2] | (a->s6_addr32[3] ^ htonl(1))) == 0;
+}
+
+static inline int ipv6_addr_v4mapped(const struct in6_addr *a)
+{
+	return (a->s6_addr32[0] | a->s6_addr32[1] |
+		 (a->s6_addr32[2] ^ htonl(0x0000ffff))) == 0;
+}
+
+/*
+ * Check for a RFC 4843 ORCHID address
+ * (Overlay Routable Cryptographic Hash Identifiers)
+ */
+static inline int ipv6_addr_orchid(const struct in6_addr *a)
+{
+	return (a->s6_addr32[0] & htonl(0xfffffff0)) == htonl(0x20010010);
+}
+
+static inline void ipv6_addr_set_v4mapped(const __be32 addr,
+					  struct in6_addr *v4mapped)
+{
+	ipv6_addr_set(v4mapped,
+			0, 0,
+			htonl(0x0000FFFF),
+			addr);
+}
+
+/*
+ * find the first different bit between two addresses
+ * length of address must be a multiple of 32bits
+ */
+static inline int __ipv6_addr_diff(const void *token1, const void *token2, int addrlen)
+{
+	const __be32 *a1 = token1, *a2 = token2;
+	int i;
+
+	addrlen >>= 2;
+
+	for (i = 0; i < addrlen; i++) {
+		__be32 xb = a1[i] ^ a2[i];
+		if (xb)
+			return i * 32 + 31 - __fls(ntohl(xb));
+	}
+
+	/*
+	 *	we should *never* get to this point since that 
+	 *	would mean the addrs are equal
+	 *
+	 *	However, we do get to it 8) And exacly, when
+	 *	addresses are equal 8)
+	 *
+	 *	ip route add 1111::/128 via ...
+	 *	ip route add 1111::/64 via ...
+	 *	and we are here.
+	 *
+	 *	Ideally, this function should stop comparison
+	 *	at prefix length. It does not, but it is still OK,
+	 *	if returned value is greater than prefix length.
+	 *					--ANK (980803)
+	 */
+	return addrlen << 5;
+}
+
+static inline int ipv6_addr_diff(const struct in6_addr *a1, const struct in6_addr *a2)
+{
+	return __ipv6_addr_diff(a1, a2, sizeof(struct in6_addr));
+}
+
+extern void ipv6_select_ident(struct frag_hdr *fhdr, struct rt6_info *rt);
+
+/*
+ *	Prototypes exported by ipv6
+ */
+
+/*
+ *	rcv function (called from netdevice level)
+ */
+
+extern int			ipv6_rcv(struct sk_buff *skb, 
+					 struct net_device *dev, 
+					 struct packet_type *pt,
+					 struct net_device *orig_dev);
+
+extern int			ip6_rcv_finish(struct sk_buff *skb);
+
+/*
+ *	upper-layer output functions
+ */
+extern int			ip6_xmit(struct sock *sk,
+					 struct sk_buff *skb,
+					 struct flowi6 *fl6,
+					 struct ipv6_txoptions *opt,
+					 int tclass);
+
+extern int			ip6_nd_hdr(struct sock *sk,
+					   struct sk_buff *skb,
+					   struct net_device *dev,
+					   const struct in6_addr *saddr,
+					   const struct in6_addr *daddr,
+					   int proto, int len);
+
+extern int			ip6_find_1stfragopt(struct sk_buff *skb, u8 **nexthdr);
+
+extern int			ip6_append_data(struct sock *sk,
+						int getfrag(void *from, char *to, int offset, int len, int odd, struct sk_buff *skb),
+		    				void *from,
+						int length,
+						int transhdrlen,
+		      				int hlimit,
+		      				int tclass,
+						struct ipv6_txoptions *opt,
+						struct flowi6 *fl6,
+						struct rt6_info *rt,
+						unsigned int flags,
+						int dontfrag);
+
+extern int			ip6_push_pending_frames(struct sock *sk);
+
+extern void			ip6_flush_pending_frames(struct sock *sk);
+
+extern int			ip6_dst_lookup(struct sock *sk,
+					       struct dst_entry **dst,
+					       struct flowi6 *fl6);
+extern struct dst_entry *	ip6_dst_lookup_flow(struct sock *sk,
+						    struct flowi6 *fl6,
+						    const struct in6_addr *final_dst,
+						    bool can_sleep);
+extern struct dst_entry *	ip6_sk_dst_lookup_flow(struct sock *sk,
+						       struct flowi6 *fl6,
+						       const struct in6_addr *final_dst,
+						       bool can_sleep);
+extern struct dst_entry *	ip6_blackhole_route(struct net *net,
+						    struct dst_entry *orig_dst);
+
+/*
+ *	skb processing functions
+ */
+
+extern int			ip6_output(struct sk_buff *skb);
+extern int			ip6_forward(struct sk_buff *skb);
+extern int			ip6_input(struct sk_buff *skb);
+extern int			ip6_mc_input(struct sk_buff *skb);
+
+extern int			__ip6_local_out(struct sk_buff *skb);
+extern int			ip6_local_out(struct sk_buff *skb);
+
+/*
+ *	Extension header (options) processing
+ */
+
+extern void 			ipv6_push_nfrag_opts(struct sk_buff *skb,
+						     struct ipv6_txoptions *opt,
+						     u8 *proto,
+						     struct in6_addr **daddr_p);
+extern void			ipv6_push_frag_opts(struct sk_buff *skb,
+						    struct ipv6_txoptions *opt,
+						    u8 *proto);
+
+extern int			ipv6_skip_exthdr(const struct sk_buff *, int start,
+					         u8 *nexthdrp, __be16 *frag_offp);
+
+extern int 			ipv6_ext_hdr(u8 nexthdr);
+
+extern int ipv6_find_tlv(struct sk_buff *skb, int offset, int type);
+
+extern struct in6_addr *fl6_update_dst(struct flowi6 *fl6,
+				       const struct ipv6_txoptions *opt,
+				       struct in6_addr *orig);
+
+/*
+ *	socket options (ipv6_sockglue.c)
+ */
+
+extern int			ipv6_setsockopt(struct sock *sk, int level, 
+						int optname,
+						char __user *optval, 
+						unsigned int optlen);
+extern int			ipv6_getsockopt(struct sock *sk, int level, 
+						int optname,
+						char __user *optval, 
+						int __user *optlen);
+extern int			compat_ipv6_setsockopt(struct sock *sk,
+						int level,
+						int optname,
+						char __user *optval,
+						unsigned int optlen);
+extern int			compat_ipv6_getsockopt(struct sock *sk,
+						int level,
+						int optname,
+						char __user *optval,
+						int __user *optlen);
+
+extern int			ip6_datagram_connect(struct sock *sk, 
+						     struct sockaddr *addr, int addr_len);
+
+extern int 			ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len);
+extern int 			ipv6_recv_rxpmtu(struct sock *sk, struct msghdr *msg, int len);
+extern void			ipv6_icmp_error(struct sock *sk, struct sk_buff *skb, int err, __be16 port,
+						u32 info, u8 *payload);
+extern void			ipv6_local_error(struct sock *sk, int err, struct flowi6 *fl6, u32 info);
+extern void			ipv6_local_rxpmtu(struct sock *sk, struct flowi6 *fl6, u32 mtu);
+
+extern int inet6_release(struct socket *sock);
+extern int inet6_bind(struct socket *sock, struct sockaddr *uaddr, 
+		      int addr_len);
+extern int inet6_getname(struct socket *sock, struct sockaddr *uaddr,
+			 int *uaddr_len, int peer);
+extern int inet6_ioctl(struct socket *sock, unsigned int cmd, 
+		       unsigned long arg);
+
+extern int inet6_hash_connect(struct inet_timewait_death_row *death_row,
+			      struct sock *sk);
+
+/*
+ * reassembly.c
+ */
+extern const struct proto_ops inet6_stream_ops;
+extern const struct proto_ops inet6_dgram_ops;
+
+struct group_source_req;
+struct group_filter;
+
+extern int ip6_mc_source(int add, int omode, struct sock *sk,
+			 struct group_source_req *pgsr);
+extern int ip6_mc_msfilter(struct sock *sk, struct group_filter *gsf);
+extern int ip6_mc_msfget(struct sock *sk, struct group_filter *gsf,
+			 struct group_filter __user *optval,
+			 int __user *optlen);
+extern unsigned int inet6_hash_frag(__be32 id, const struct in6_addr *saddr,
+				    const struct in6_addr *daddr, u32 rnd);
+
+#ifdef CONFIG_PROC_FS
+extern int  ac6_proc_init(struct net *net);
+extern void ac6_proc_exit(struct net *net);
+extern int  raw6_proc_init(void);
+extern void raw6_proc_exit(void);
+extern int  tcp6_proc_init(struct net *net);
+extern void tcp6_proc_exit(struct net *net);
+extern int  udp6_proc_init(struct net *net);
+extern void udp6_proc_exit(struct net *net);
+extern int  udplite6_proc_init(void);
+extern void udplite6_proc_exit(void);
+extern int  ipv6_misc_proc_init(void);
+extern void ipv6_misc_proc_exit(void);
+extern int snmp6_register_dev(struct inet6_dev *idev);
+extern int snmp6_unregister_dev(struct inet6_dev *idev);
+
+#else
+static inline int ac6_proc_init(struct net *net) { return 0; }
+static inline void ac6_proc_exit(struct net *net) { }
+static inline int snmp6_register_dev(struct inet6_dev *idev) { return 0; }
+static inline int snmp6_unregister_dev(struct inet6_dev *idev) { return 0; }
+#endif
+
+#ifdef CONFIG_SYSCTL
+extern ctl_table ipv6_route_table_template[];
+extern ctl_table ipv6_icmp_table_template[];
+
+extern struct ctl_table *ipv6_icmp_sysctl_init(struct net *net);
+extern struct ctl_table *ipv6_route_sysctl_init(struct net *net);
+extern int ipv6_sysctl_register(void);
+extern void ipv6_sysctl_unregister(void);
+extern int ipv6_static_sysctl_register(void);
+extern void ipv6_static_sysctl_unregister(void);
+#endif
+
+#endif /* _NET_IPV6_H */
diff --git a/include/net/ipx.h b/include/net/ipx.h
new file mode 100644
index 00000000..c1fec6b4
--- /dev/null
+++ b/include/net/ipx.h
@@ -0,0 +1,160 @@
+#ifndef _NET_INET_IPX_H_
+#define _NET_INET_IPX_H_
+/*
+ *	The following information is in its entirety obtained from:
+ *
+ *	Novell 'IPX Router Specification' Version 1.10 
+ *		Part No. 107-000029-001
+ *
+ *	Which is available from ftp.novell.com
+ */
+
+#include <linux/netdevice.h>
+#include <net/datalink.h>
+#include <linux/ipx.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+
+struct ipx_address {
+	__be32  net;
+	__u8    node[IPX_NODE_LEN]; 
+	__be16  sock;
+};
+
+#define ipx_broadcast_node	"\377\377\377\377\377\377"
+#define ipx_this_node           "\0\0\0\0\0\0"
+
+#define IPX_MAX_PPROP_HOPS 8
+
+struct ipxhdr {
+	__be16			ipx_checksum __packed;
+#define IPX_NO_CHECKSUM	cpu_to_be16(0xFFFF)
+	__be16			ipx_pktsize __packed;
+	__u8			ipx_tctrl;
+	__u8			ipx_type;
+#define IPX_TYPE_UNKNOWN	0x00
+#define IPX_TYPE_RIP		0x01	/* may also be 0 */
+#define IPX_TYPE_SAP		0x04	/* may also be 0 */
+#define IPX_TYPE_SPX		0x05	/* SPX protocol */
+#define IPX_TYPE_NCP		0x11	/* $lots for docs on this (SPIT) */
+#define IPX_TYPE_PPROP		0x14	/* complicated flood fill brdcast */
+	struct ipx_address	ipx_dest __packed;
+	struct ipx_address	ipx_source __packed;
+};
+
+static __inline__ struct ipxhdr *ipx_hdr(struct sk_buff *skb)
+{
+	return (struct ipxhdr *)skb_transport_header(skb);
+}
+
+struct ipx_interface {
+	/* IPX address */
+	__be32			if_netnum;
+	unsigned char		if_node[IPX_NODE_LEN];
+	atomic_t		refcnt;
+
+	/* physical device info */
+	struct net_device	*if_dev;
+	struct datalink_proto	*if_dlink;
+	__be16			if_dlink_type;
+
+	/* socket support */
+	unsigned short		if_sknum;
+	struct hlist_head	if_sklist;
+	spinlock_t		if_sklist_lock;
+
+	/* administrative overhead */
+	int			if_ipx_offset;
+	unsigned char		if_internal;
+	unsigned char		if_primary;
+	
+	struct list_head	node; /* node in ipx_interfaces list */
+};
+
+struct ipx_route {
+	__be32			ir_net;
+	struct ipx_interface	*ir_intrfc;
+	unsigned char		ir_routed;
+	unsigned char		ir_router_node[IPX_NODE_LEN];
+	struct list_head	node; /* node in ipx_routes list */
+	atomic_t		refcnt;
+};
+
+struct ipx_cb {
+	u8	ipx_tctrl;
+	__be32	ipx_dest_net;
+	__be32	ipx_source_net;
+	struct {
+		__be32 netnum;
+		int index;
+	} last_hop;
+};
+
+#include <net/sock.h>
+
+struct ipx_sock {
+	/* struct sock has to be the first member of ipx_sock */
+	struct sock		sk;
+	struct ipx_address	dest_addr;
+	struct ipx_interface	*intrfc;
+	__be16			port;
+#ifdef CONFIG_IPX_INTERN
+	unsigned char		node[IPX_NODE_LEN];
+#endif
+	unsigned short		type;
+	/*
+	 * To handle special ncp connection-handling sockets for mars_nwe,
+ 	 * the connection number must be stored in the socket.
+	 */
+	unsigned short		ipx_ncp_conn;
+};
+
+static inline struct ipx_sock *ipx_sk(struct sock *sk)
+{
+	return (struct ipx_sock *)sk;
+}
+
+#define IPX_SKB_CB(__skb) ((struct ipx_cb *)&((__skb)->cb[0]))
+
+#define IPX_MIN_EPHEMERAL_SOCKET	0x4000
+#define IPX_MAX_EPHEMERAL_SOCKET	0x7fff
+
+extern struct list_head ipx_routes;
+extern rwlock_t ipx_routes_lock;
+
+extern struct list_head ipx_interfaces;
+extern struct ipx_interface *ipx_interfaces_head(void);
+extern spinlock_t ipx_interfaces_lock;
+
+extern struct ipx_interface *ipx_primary_net;
+
+extern int ipx_proc_init(void);
+extern void ipx_proc_exit(void);
+
+extern const char *ipx_frame_name(__be16);
+extern const char *ipx_device_name(struct ipx_interface *intrfc);
+
+static __inline__ void ipxitf_hold(struct ipx_interface *intrfc)
+{
+	atomic_inc(&intrfc->refcnt);
+}
+
+extern void ipxitf_down(struct ipx_interface *intrfc);
+
+static __inline__ void ipxitf_put(struct ipx_interface *intrfc)
+{
+	if (atomic_dec_and_test(&intrfc->refcnt))
+		ipxitf_down(intrfc);
+}
+
+static __inline__ void ipxrtr_hold(struct ipx_route *rt)
+{
+	        atomic_inc(&rt->refcnt);
+}
+
+static __inline__ void ipxrtr_put(struct ipx_route *rt)
+{
+	        if (atomic_dec_and_test(&rt->refcnt))
+			                kfree(rt);
+}
+#endif /* _NET_INET_IPX_H_ */
diff --git a/include/net/irda/af_irda.h b/include/net/irda/af_irda.h
new file mode 100644
index 00000000..0df57493
--- /dev/null
+++ b/include/net/irda/af_irda.h
@@ -0,0 +1,87 @@
+/*********************************************************************
+ *                
+ * Filename:      af_irda.h
+ * Version:       1.0
+ * Description:   IrDA sockets declarations
+ * Status:        Stable
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Tue Dec  9 21:13:12 1997
+ * Modified at:   Fri Jan 28 13:16:32 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-2000 Dag Brattli, All Rights Reserved.
+ *     Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com>
+ *      
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *  
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *     
+ ********************************************************************/
+
+#ifndef AF_IRDA_H
+#define AF_IRDA_H
+
+#include <linux/irda.h>
+#include <net/irda/irda.h>
+#include <net/irda/iriap.h>		/* struct iriap_cb */
+#include <net/irda/irias_object.h>	/* struct ias_value */
+#include <net/irda/irlmp.h>		/* struct lsap_cb */
+#include <net/irda/irttp.h>		/* struct tsap_cb */
+#include <net/irda/discovery.h>		/* struct discovery_t */
+#include <net/sock.h>
+
+/* IrDA Socket */
+struct irda_sock {
+	/* struct sock has to be the first member of irda_sock */
+	struct sock sk;
+	__u32 saddr;          /* my local address */
+	__u32 daddr;          /* peer address */
+
+	struct lsap_cb *lsap; /* LSAP used by Ultra */
+	__u8  pid;            /* Protocol IP (PID) used by Ultra */
+
+	struct tsap_cb *tsap; /* TSAP used by this connection */
+	__u8 dtsap_sel;       /* remote TSAP address */
+	__u8 stsap_sel;       /* local TSAP address */
+	
+	__u32 max_sdu_size_rx;
+	__u32 max_sdu_size_tx;
+	__u32 max_data_size;
+	__u8  max_header_size;
+	struct qos_info qos_tx;
+
+	__u16_host_order mask;           /* Hint bits mask */
+	__u16_host_order hints;          /* Hint bits */
+
+	void *ckey;           /* IrLMP client handle */
+	void *skey;           /* IrLMP service handle */
+
+	struct ias_object *ias_obj;   /* Our service name + lsap in IAS */
+	struct iriap_cb *iriap;	      /* Used to query remote IAS */
+	struct ias_value *ias_result; /* Result of remote IAS query */
+
+	hashbin_t *cachelog;		/* Result of discovery query */
+	__u32 cachedaddr;	/* Result of selective discovery query */
+
+	int nslots;           /* Number of slots to use for discovery */
+
+	int errno;            /* status of the IAS query */
+
+	wait_queue_head_t query_wait;	/* Wait for the answer to a query */
+	struct timer_list watchdog;	/* Timeout for discovery */
+
+	LOCAL_FLOW tx_flow;
+	LOCAL_FLOW rx_flow;
+};
+
+static inline struct irda_sock *irda_sk(struct sock *sk)
+{
+	return (struct irda_sock *)sk;
+}
+
+#endif /* AF_IRDA_H */
diff --git a/include/net/irda/crc.h b/include/net/irda/crc.h
new file mode 100644
index 00000000..f202296d
--- /dev/null
+++ b/include/net/irda/crc.h
@@ -0,0 +1,29 @@
+/*********************************************************************
+ *                
+ * Filename:      crc.h
+ * Version:       
+ * Description:   CRC routines
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Mon Aug  4 20:40:53 1997
+ * Modified at:   Sun May  2 20:25:23 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ ********************************************************************/
+
+#ifndef IRDA_CRC_H
+#define IRDA_CRC_H
+
+#include <linux/types.h>
+#include <linux/crc-ccitt.h>
+
+#define INIT_FCS  0xffff   /* Initial FCS value */
+#define GOOD_FCS  0xf0b8   /* Good final FCS value */
+
+/* Recompute the FCS with one more character appended. */
+#define irda_fcs(fcs, c) crc_ccitt_byte(fcs, c)
+
+/* Recompute the FCS with len bytes appended. */
+#define irda_calc_crc16(fcs, buf, len) crc_ccitt(fcs, buf, len)
+
+#endif
diff --git a/include/net/irda/discovery.h b/include/net/irda/discovery.h
new file mode 100644
index 00000000..0ce93398
--- /dev/null
+++ b/include/net/irda/discovery.h
@@ -0,0 +1,97 @@
+/*********************************************************************
+ *                
+ * Filename:      discovery.h
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Tue Apr  6 16:53:53 1999
+ * Modified at:   Tue Oct  5 10:05:10 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *     Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com>
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#ifndef DISCOVERY_H
+#define DISCOVERY_H
+
+#include <asm/param.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irqueue.h>		/* irda_queue_t */
+#include <net/irda/irlap_event.h>	/* LAP_REASON */
+
+#define DISCOVERY_EXPIRE_TIMEOUT (2*sysctl_discovery_timeout*HZ)
+#define DISCOVERY_DEFAULT_SLOTS  0
+
+/*
+ *  This type is used by the protocols that transmit 16 bits words in 
+ *  little endian format. A little endian machine stores MSB of word in
+ *  byte[1] and LSB in byte[0]. A big endian machine stores MSB in byte[0] 
+ *  and LSB in byte[1].
+ *
+ * This structure is used in the code for things that are endian neutral
+ * but that fit in a word so that we can manipulate them efficiently.
+ * By endian neutral, I mean things that are really an array of bytes,
+ * and always used as such, for example the hint bits. Jean II
+ */
+typedef union {
+	__u16 word;
+	__u8  byte[2];
+} __u16_host_order;
+
+/* Types of discovery */
+typedef enum {
+	DISCOVERY_LOG,		/* What's in our discovery log */
+	DISCOVERY_ACTIVE,	/* Doing our own discovery on the medium */
+	DISCOVERY_PASSIVE,	/* Peer doing discovery on the medium */
+	EXPIRY_TIMEOUT,		/* Entry expired due to timeout */
+} DISCOVERY_MODE;
+
+#define NICKNAME_MAX_LEN 21
+
+/* Basic discovery information about a peer */
+typedef struct irda_device_info		discinfo_t;	/* linux/irda.h */
+
+/*
+ * The DISCOVERY structure is used for both discovery requests and responses
+ */
+typedef struct discovery_t {
+	irda_queue_t	q;		/* Must be first! */
+
+	discinfo_t	data;		/* Basic discovery information */
+	int		name_len;	/* Length of nickname */
+
+	LAP_REASON	condition;	/* More info about the discovery */
+	int		gen_addr_bit;	/* Need to generate a new device
+					 * address? */
+	int		nslots;		/* Number of slots to use when
+					 * discovering */
+	unsigned long	timestamp;	/* Last time discovered */
+	unsigned long	firststamp;	/* First time discovered */
+} discovery_t;
+
+void irlmp_add_discovery(hashbin_t *cachelog, discovery_t *discovery);
+void irlmp_add_discovery_log(hashbin_t *cachelog, hashbin_t *log);
+void irlmp_expire_discoveries(hashbin_t *log, __u32 saddr, int force);
+struct irda_device_info *irlmp_copy_discoveries(hashbin_t *log, int *pn,
+						__u16 mask, int old_entries);
+
+#endif
diff --git a/include/net/irda/ircomm_core.h b/include/net/irda/ircomm_core.h
new file mode 100644
index 00000000..69b610ac
--- /dev/null
+++ b/include/net/irda/ircomm_core.h
@@ -0,0 +1,108 @@
+/*********************************************************************
+ *                
+ * Filename:      ircomm_core.h
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Wed Jun  9 08:58:43 1999
+ * Modified at:   Mon Dec 13 11:52:29 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#ifndef IRCOMM_CORE_H
+#define IRCOMM_CORE_H
+
+#include <net/irda/irda.h>
+#include <net/irda/irqueue.h>
+#include <net/irda/ircomm_event.h>
+
+#define IRCOMM_MAGIC 0x98347298
+#define IRCOMM_HEADER_SIZE 1
+
+struct ircomm_cb;   /* Forward decl. */
+
+/*
+ * A small call-table, so we don't have to check the service-type whenever
+ * we want to do something
+ */
+typedef struct {
+	int (*data_request)(struct ircomm_cb *, struct sk_buff *, int clen);
+	int (*connect_request)(struct ircomm_cb *, struct sk_buff *, 
+			       struct ircomm_info *);
+	int (*connect_response)(struct ircomm_cb *, struct sk_buff *);
+	int (*disconnect_request)(struct ircomm_cb *, struct sk_buff *, 
+				  struct ircomm_info *);	
+} call_t;
+
+struct ircomm_cb {
+	irda_queue_t queue;
+	magic_t magic;
+
+	notify_t notify;
+	call_t   issue;
+
+	int state;
+	int line;            /* Which TTY line we are using */
+
+	struct tsap_cb *tsap;
+	struct lsap_cb *lsap;
+	
+	__u8 dlsap_sel;      /* Destination LSAP/TSAP selector */
+	__u8 slsap_sel;      /* Source LSAP/TSAP selector */
+
+	__u32 saddr;         /* Source device address (link we are using) */
+	__u32 daddr;         /* Destination device address */
+
+	int max_header_size; /* Header space we must reserve for each frame */
+	int max_data_size;   /* The amount of data we can fill in each frame */
+
+	LOCAL_FLOW flow_status; /* Used by ircomm_lmp */
+	int pkt_count;          /* Number of frames we have sent to IrLAP */
+
+	__u8 service_type;
+};
+
+extern hashbin_t *ircomm;
+
+struct ircomm_cb *ircomm_open(notify_t *notify, __u8 service_type, int line);
+int ircomm_close(struct ircomm_cb *self);
+
+int ircomm_data_request(struct ircomm_cb *self, struct sk_buff *skb);
+void ircomm_data_indication(struct ircomm_cb *self, struct sk_buff *skb);
+void ircomm_process_data(struct ircomm_cb *self, struct sk_buff *skb);
+int ircomm_control_request(struct ircomm_cb *self, struct sk_buff *skb);
+int ircomm_connect_request(struct ircomm_cb *self, __u8 dlsap_sel, 
+			   __u32 saddr, __u32 daddr, struct sk_buff *skb,
+			   __u8 service_type);
+void ircomm_connect_indication(struct ircomm_cb *self, struct sk_buff *skb,
+			       struct ircomm_info *info);
+void ircomm_connect_confirm(struct ircomm_cb *self, struct sk_buff *skb,
+			    struct ircomm_info *info);
+int ircomm_connect_response(struct ircomm_cb *self, struct sk_buff *userdata);
+int ircomm_disconnect_request(struct ircomm_cb *self, struct sk_buff *userdata);
+void ircomm_disconnect_indication(struct ircomm_cb *self, struct sk_buff *skb,
+				  struct ircomm_info *info);
+void ircomm_flow_request(struct ircomm_cb *self, LOCAL_FLOW flow);
+
+#define ircomm_is_connected(self) (self->state == IRCOMM_CONN)
+
+#endif
diff --git a/include/net/irda/ircomm_event.h b/include/net/irda/ircomm_event.h
new file mode 100644
index 00000000..bc0c6f31
--- /dev/null
+++ b/include/net/irda/ircomm_event.h
@@ -0,0 +1,85 @@
+/*********************************************************************
+ *                
+ * Filename:      ircomm_event.h
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun Jun  6 23:51:13 1999
+ * Modified at:   Thu Jun 10 08:36:25 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#ifndef IRCOMM_EVENT_H
+#define IRCOMM_EVENT_H
+
+#include <net/irda/irmod.h>
+
+typedef enum {
+        IRCOMM_IDLE,
+        IRCOMM_WAITI,
+        IRCOMM_WAITR,
+        IRCOMM_CONN,
+} IRCOMM_STATE;
+
+/* IrCOMM Events */
+typedef enum {
+        IRCOMM_CONNECT_REQUEST,
+        IRCOMM_CONNECT_RESPONSE,
+        IRCOMM_TTP_CONNECT_INDICATION,
+	IRCOMM_LMP_CONNECT_INDICATION,
+        IRCOMM_TTP_CONNECT_CONFIRM,
+	IRCOMM_LMP_CONNECT_CONFIRM,
+
+        IRCOMM_LMP_DISCONNECT_INDICATION,
+	IRCOMM_TTP_DISCONNECT_INDICATION,
+        IRCOMM_DISCONNECT_REQUEST,
+
+        IRCOMM_TTP_DATA_INDICATION,
+	IRCOMM_LMP_DATA_INDICATION,
+        IRCOMM_DATA_REQUEST,
+        IRCOMM_CONTROL_REQUEST,
+        IRCOMM_CONTROL_INDICATION,
+} IRCOMM_EVENT;
+
+/*
+ * Used for passing information through the state-machine
+ */
+struct ircomm_info {
+        __u32     saddr;               /* Source device address */
+        __u32     daddr;               /* Destination device address */
+        __u8      dlsap_sel;
+        LM_REASON reason;              /* Reason for disconnect */
+	__u32     max_data_size;
+	__u32     max_header_size;
+
+	struct qos_info *qos;
+};
+
+extern const char *const ircomm_state[];
+
+struct ircomm_cb;   /* Forward decl. */
+
+int ircomm_do_event(struct ircomm_cb *self, IRCOMM_EVENT event,
+		    struct sk_buff *skb, struct ircomm_info *info);
+void ircomm_next_state(struct ircomm_cb *self, IRCOMM_STATE state);
+
+#endif
diff --git a/include/net/irda/ircomm_lmp.h b/include/net/irda/ircomm_lmp.h
new file mode 100644
index 00000000..ae02106b
--- /dev/null
+++ b/include/net/irda/ircomm_lmp.h
@@ -0,0 +1,38 @@
+/*********************************************************************
+ *                
+ * Filename:      ircomm_lmp.h
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Wed Jun  9 10:06:07 1999
+ * Modified at:   Fri Aug 13 07:32:32 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#ifndef IRCOMM_LMP_H
+#define IRCOMM_LMP_H
+
+#include <net/irda/ircomm_core.h>
+
+int ircomm_open_lsap(struct ircomm_cb *self);
+
+#endif
diff --git a/include/net/irda/ircomm_param.h b/include/net/irda/ircomm_param.h
new file mode 100644
index 00000000..e6678800
--- /dev/null
+++ b/include/net/irda/ircomm_param.h
@@ -0,0 +1,149 @@
+/*********************************************************************
+ *                
+ * Filename:      ircomm_param.h
+ * Version:       1.0
+ * Description:   Parameter handling for the IrCOMM protocol
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Mon Jun  7 08:47:28 1999
+ * Modified at:   Wed Aug 25 13:46:33 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#ifndef IRCOMM_PARAMS_H
+#define IRCOMM_PARAMS_H
+
+#include <net/irda/parameters.h>
+
+/* Parameters common to all service types */
+#define IRCOMM_SERVICE_TYPE     0x00
+#define IRCOMM_PORT_TYPE        0x01 /* Only used in LM-IAS */
+#define IRCOMM_PORT_NAME        0x02 /* Only used in LM-IAS */
+
+/* Parameters for both 3 wire and 9 wire */
+#define IRCOMM_DATA_RATE        0x10
+#define IRCOMM_DATA_FORMAT      0x11
+#define IRCOMM_FLOW_CONTROL     0x12
+#define IRCOMM_XON_XOFF         0x13
+#define IRCOMM_ENQ_ACK          0x14
+#define IRCOMM_LINE_STATUS      0x15
+#define IRCOMM_BREAK            0x16
+
+/* Parameters for 9 wire */
+#define IRCOMM_DTE              0x20
+#define IRCOMM_DCE              0x21
+#define IRCOMM_POLL             0x22
+
+/* Service type (details) */
+#define IRCOMM_3_WIRE_RAW       0x01
+#define IRCOMM_3_WIRE           0x02
+#define IRCOMM_9_WIRE           0x04
+#define IRCOMM_CENTRONICS       0x08
+
+/* Port type (details) */
+#define IRCOMM_SERIAL           0x00
+#define IRCOMM_PARALLEL         0x01
+
+/* Data format (details) */
+#define IRCOMM_WSIZE_5          0x00
+#define IRCOMM_WSIZE_6          0x01
+#define IRCOMM_WSIZE_7          0x02
+#define IRCOMM_WSIZE_8          0x03
+
+#define IRCOMM_1_STOP_BIT       0x00
+#define IRCOMM_2_STOP_BIT       0x04 /* 1.5 if char len 5 */
+
+#define IRCOMM_PARITY_DISABLE   0x00
+#define IRCOMM_PARITY_ENABLE    0x08
+
+#define IRCOMM_PARITY_ODD       0x00
+#define IRCOMM_PARITY_EVEN      0x10
+#define IRCOMM_PARITY_MARK      0x20
+#define IRCOMM_PARITY_SPACE     0x30
+
+/* Flow control */
+#define IRCOMM_XON_XOFF_IN      0x01
+#define IRCOMM_XON_XOFF_OUT     0x02
+#define IRCOMM_RTS_CTS_IN       0x04
+#define IRCOMM_RTS_CTS_OUT      0x08
+#define IRCOMM_DSR_DTR_IN       0x10
+#define IRCOMM_DSR_DTR_OUT      0x20
+#define IRCOMM_ENQ_ACK_IN       0x40
+#define IRCOMM_ENQ_ACK_OUT      0x80
+
+/* Line status */
+#define IRCOMM_OVERRUN_ERROR    0x02
+#define IRCOMM_PARITY_ERROR     0x04
+#define IRCOMM_FRAMING_ERROR    0x08
+
+/* DTE (Data terminal equipment) line settings */
+#define IRCOMM_DELTA_DTR        0x01
+#define IRCOMM_DELTA_RTS        0x02
+#define IRCOMM_DTR              0x04
+#define IRCOMM_RTS              0x08
+
+/* DCE (Data communications equipment) line settings */
+#define IRCOMM_DELTA_CTS        0x01  /* Clear to send has changed */
+#define IRCOMM_DELTA_DSR        0x02  /* Data set ready has changed */
+#define IRCOMM_DELTA_RI         0x04  /* Ring indicator has changed */
+#define IRCOMM_DELTA_CD         0x08  /* Carrier detect has changed */
+#define IRCOMM_CTS              0x10  /* Clear to send is high */
+#define IRCOMM_DSR              0x20  /* Data set ready is high */
+#define IRCOMM_RI               0x40  /* Ring indicator is high */
+#define IRCOMM_CD               0x80  /* Carrier detect is high */
+#define IRCOMM_DCE_DELTA_ANY    0x0f
+
+/*
+ * Parameter state
+ */
+struct ircomm_params {
+	/* General control params */
+	__u8  service_type;
+	__u8  port_type;
+	char  port_name[32];
+
+	/* Control params for 3- and 9-wire service type */
+	__u32 data_rate;         /* Data rate in bps */
+	__u8  data_format;
+	__u8  flow_control;
+	char  xonxoff[2];
+	char  enqack[2];
+	__u8  line_status;
+	__u8  _break;
+
+	__u8  null_modem;
+
+	/* Control params for 9-wire service type */
+	__u8 dte;
+	__u8 dce;
+	__u8 poll;
+
+	/* Control params for Centronics service type */
+};
+
+struct ircomm_tty_cb; /* Forward decl. */
+
+int ircomm_param_request(struct ircomm_tty_cb *self, __u8 pi, int flush);
+
+extern pi_param_info_t ircomm_param_info;
+
+#endif /* IRCOMM_PARAMS_H */
+
diff --git a/include/net/irda/ircomm_ttp.h b/include/net/irda/ircomm_ttp.h
new file mode 100644
index 00000000..403081ed
--- /dev/null
+++ b/include/net/irda/ircomm_ttp.h
@@ -0,0 +1,39 @@
+/*********************************************************************
+ *                
+ * Filename:      ircomm_ttp.h
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Wed Jun  9 10:06:07 1999
+ * Modified at:   Fri Aug 13 07:32:22 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#ifndef IRCOMM_TTP_H
+#define IRCOMM_TTP_H
+
+#include <net/irda/ircomm_core.h>
+
+int  ircomm_open_tsap(struct ircomm_cb *self);
+
+#endif
+
diff --git a/include/net/irda/ircomm_tty.h b/include/net/irda/ircomm_tty.h
new file mode 100644
index 00000000..59ba38bc
--- /dev/null
+++ b/include/net/irda/ircomm_tty.h
@@ -0,0 +1,138 @@
+/*********************************************************************
+ *                
+ * Filename:      ircomm_tty.h
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun Jun  6 23:24:22 1999
+ * Modified at:   Fri Jan 28 13:16:57 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#ifndef IRCOMM_TTY_H
+#define IRCOMM_TTY_H
+
+#include <linux/serial.h>
+#include <linux/termios.h>
+#include <linux/timer.h>
+#include <linux/tty.h>		/* struct tty_struct */
+
+#include <net/irda/irias_object.h>
+#include <net/irda/ircomm_core.h>
+#include <net/irda/ircomm_param.h>
+
+#define IRCOMM_TTY_PORTS 32
+#define IRCOMM_TTY_MAGIC 0x3432
+#define IRCOMM_TTY_MAJOR 161
+#define IRCOMM_TTY_MINOR 0
+
+/* This is used as an initial value to max_header_size before the proper
+ * value is filled in (5 for ttp, 4 for lmp). This allow us to detect
+ * the state of the underlying connection. - Jean II */
+#define IRCOMM_TTY_HDR_UNINITIALISED	16
+/* Same for payload size. See qos.c for the smallest max data size */
+#define IRCOMM_TTY_DATA_UNINITIALISED	(64 - IRCOMM_TTY_HDR_UNINITIALISED)
+
+/* Those are really defined in include/linux/serial.h - Jean II */
+#define ASYNC_B_INITIALIZED	31	/* Serial port was initialized */
+#define ASYNC_B_NORMAL_ACTIVE	29	/* Normal device is active */
+#define ASYNC_B_CLOSING		27	/* Serial port is closing */
+
+/*
+ * IrCOMM TTY driver state
+ */
+struct ircomm_tty_cb {
+	irda_queue_t queue;            /* Must be first */
+	magic_t magic;
+
+	int state;                /* Connect state */
+
+	struct tty_struct *tty;
+	struct ircomm_cb *ircomm; /* IrCOMM layer instance */
+
+	struct sk_buff *tx_skb;   /* Transmit buffer */
+	struct sk_buff *ctrl_skb; /* Control data buffer */
+
+	/* Parameters */
+	struct ircomm_params settings;
+
+	__u8 service_type;        /* The service that we support */
+	int client;               /* True if we are a client */
+	LOCAL_FLOW flow;          /* IrTTP flow status */
+
+	int line;
+	unsigned long flags;
+
+	__u8 dlsap_sel;
+	__u8 slsap_sel;
+
+	__u32 saddr;
+	__u32 daddr;
+
+	__u32 max_data_size;   /* Max data we can transmit in one packet */
+	__u32 max_header_size; /* The amount of header space we must reserve */
+	__u32 tx_data_size;	/* Max data size of current tx_skb */
+
+	struct iriap_cb *iriap; /* Instance used for querying remote IAS */
+	struct ias_object* obj;
+	void *skey;
+	void *ckey;
+
+	wait_queue_head_t open_wait;
+	wait_queue_head_t close_wait;
+	struct timer_list watchdog_timer;
+	struct work_struct  tqueue;
+
+        unsigned short    close_delay;
+        unsigned short    closing_wait; /* time to wait before closing */
+
+	int  open_count;
+	int  blocked_open;	/* # of blocked opens */
+
+	/* Protect concurent access to :
+	 *	o self->open_count
+	 *	o self->ctrl_skb
+	 *	o self->tx_skb
+	 * Maybe other things may gain to be protected as well...
+	 * Jean II */
+	spinlock_t spinlock;
+};
+
+void ircomm_tty_start(struct tty_struct *tty);
+void ircomm_tty_check_modem_status(struct ircomm_tty_cb *self);
+
+extern int ircomm_tty_tiocmget(struct tty_struct *tty);
+extern int ircomm_tty_tiocmset(struct tty_struct *tty,
+			       unsigned int set, unsigned int clear);
+extern int ircomm_tty_ioctl(struct tty_struct *tty, 
+			    unsigned int cmd, unsigned long arg);
+extern void ircomm_tty_set_termios(struct tty_struct *tty, 
+				   struct ktermios *old_termios);
+
+#endif
+
+
+
+
+
+
+
diff --git a/include/net/irda/ircomm_tty_attach.h b/include/net/irda/ircomm_tty_attach.h
new file mode 100644
index 00000000..0a63bbb9
--- /dev/null
+++ b/include/net/irda/ircomm_tty_attach.h
@@ -0,0 +1,94 @@
+/*********************************************************************
+ *                
+ * Filename:      ircomm_tty_attach.h
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Wed Jun  9 15:55:18 1999
+ * Modified at:   Fri Dec 10 21:04:55 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#ifndef IRCOMM_TTY_ATTACH_H
+#define IRCOMM_TTY_ATTACH_H
+
+#include <net/irda/ircomm_tty.h>
+
+typedef enum {
+        IRCOMM_TTY_IDLE,
+	IRCOMM_TTY_SEARCH,
+        IRCOMM_TTY_QUERY_PARAMETERS,
+	IRCOMM_TTY_QUERY_LSAP_SEL,
+	IRCOMM_TTY_SETUP,
+        IRCOMM_TTY_READY,
+} IRCOMM_TTY_STATE;
+
+/* IrCOMM TTY Events */
+typedef enum {
+	IRCOMM_TTY_ATTACH_CABLE,
+	IRCOMM_TTY_DETACH_CABLE,
+	IRCOMM_TTY_DATA_REQUEST,
+	IRCOMM_TTY_DATA_INDICATION,
+	IRCOMM_TTY_DISCOVERY_REQUEST,
+	IRCOMM_TTY_DISCOVERY_INDICATION,
+	IRCOMM_TTY_CONNECT_CONFIRM,
+	IRCOMM_TTY_CONNECT_INDICATION,
+	IRCOMM_TTY_DISCONNECT_REQUEST,
+	IRCOMM_TTY_DISCONNECT_INDICATION,
+	IRCOMM_TTY_WD_TIMER_EXPIRED,
+	IRCOMM_TTY_GOT_PARAMETERS,
+	IRCOMM_TTY_GOT_LSAPSEL,
+} IRCOMM_TTY_EVENT;
+
+/* Used for passing information through the state-machine */
+struct ircomm_tty_info {
+        __u32     saddr;               /* Source device address */
+        __u32     daddr;               /* Destination device address */
+        __u8      dlsap_sel;
+};
+
+extern const char *const ircomm_state[];
+extern const char *const ircomm_tty_state[];
+
+int ircomm_tty_do_event(struct ircomm_tty_cb *self, IRCOMM_TTY_EVENT event,
+			struct sk_buff *skb, struct ircomm_tty_info *info);
+
+
+int  ircomm_tty_attach_cable(struct ircomm_tty_cb *self);
+void ircomm_tty_detach_cable(struct ircomm_tty_cb *self);
+void ircomm_tty_connect_confirm(void *instance, void *sap, 
+				struct qos_info *qos, 
+				__u32 max_sdu_size, 
+				__u8 max_header_size, 
+				struct sk_buff *skb);
+void ircomm_tty_disconnect_indication(void *instance, void *sap, 
+				      LM_REASON reason,
+				      struct sk_buff *skb);
+void ircomm_tty_connect_indication(void *instance, void *sap, 
+				   struct qos_info *qos, 
+				   __u32 max_sdu_size,
+				   __u8 max_header_size, 
+				   struct sk_buff *skb);
+int ircomm_tty_send_initial_parameters(struct ircomm_tty_cb *self);
+void ircomm_tty_link_established(struct ircomm_tty_cb *self);
+
+#endif /* IRCOMM_TTY_ATTACH_H */
diff --git a/include/net/irda/irda.h b/include/net/irda/irda.h
new file mode 100644
index 00000000..3bed61d3
--- /dev/null
+++ b/include/net/irda/irda.h
@@ -0,0 +1,131 @@
+/*********************************************************************
+ *                
+ * Filename:      irda.h
+ * Version:       1.0
+ * Description:   IrDA common include file for kernel internal use
+ * Status:        Stable
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Tue Dec  9 21:13:12 1997
+ * Modified at:   Fri Jan 28 13:16:32 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-2000 Dag Brattli, All Rights Reserved.
+ *     Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com>
+ *      
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *  
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *     
+ ********************************************************************/
+
+#ifndef NET_IRDA_H
+#define NET_IRDA_H
+
+#include <linux/skbuff.h>		/* struct sk_buff */
+#include <linux/kernel.h>
+#include <linux/if.h>			/* sa_family_t in <linux/irda.h> */
+#include <linux/irda.h>
+
+typedef __u32 magic_t;
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+
+#ifndef FALSE 
+#define FALSE 0
+#endif
+
+/* Hack to do small backoff when setting media busy in IrLAP */
+#ifndef SMALL
+#define SMALL 5
+#endif
+
+#ifndef IRDA_MIN /* Lets not mix this MIN with other header files */
+#define IRDA_MIN(a, b) (((a) < (b)) ? (a) : (b))
+#endif
+
+#ifndef IRDA_ALIGN
+#  define IRDA_ALIGN __attribute__((aligned))
+#endif
+
+#ifdef CONFIG_IRDA_DEBUG
+
+extern unsigned int irda_debug;
+
+/* use 0 for production, 1 for verification, >2 for debug */
+#define IRDA_DEBUG_LEVEL 0
+
+#define IRDA_DEBUG(n, args...) \
+do {	if (irda_debug >= (n)) \
+		printk(KERN_DEBUG args); \
+} while (0)
+#define IRDA_ASSERT(expr, func) \
+do { if(!(expr)) { \
+	printk( "Assertion failed! %s:%s:%d %s\n", \
+		__FILE__,__func__,__LINE__,(#expr) ); \
+	func } } while (0)
+#define IRDA_ASSERT_LABEL(label)	label
+#else
+#define IRDA_DEBUG(n, args...) do { } while (0)
+#define IRDA_ASSERT(expr, func) do { (void)(expr); } while (0)
+#define IRDA_ASSERT_LABEL(label)
+#endif /* CONFIG_IRDA_DEBUG */
+
+#define IRDA_WARNING(args...) do { if (net_ratelimit()) printk(KERN_WARNING args); } while (0)
+#define IRDA_MESSAGE(args...) do { if (net_ratelimit()) printk(KERN_INFO args); } while (0)
+#define IRDA_ERROR(args...)   do { if (net_ratelimit()) printk(KERN_ERR args); } while (0)
+
+/*
+ *  Magic numbers used by Linux-IrDA. Random numbers which must be unique to 
+ *  give the best protection
+ */
+
+#define IRTTY_MAGIC        0x2357
+#define LAP_MAGIC          0x1357
+#define LMP_MAGIC          0x4321
+#define LMP_LSAP_MAGIC     0x69333
+#define LMP_LAP_MAGIC      0x3432
+#define IRDA_DEVICE_MAGIC  0x63454
+#define IAS_MAGIC          0x007
+#define TTP_MAGIC          0x241169
+#define TTP_TSAP_MAGIC     0x4345
+#define IROBEX_MAGIC       0x341324
+#define HB_MAGIC           0x64534
+#define IRLAN_MAGIC        0x754
+#define IAS_OBJECT_MAGIC   0x34234
+#define IAS_ATTRIB_MAGIC   0x45232
+#define IRDA_TASK_MAGIC    0x38423
+
+#define IAS_DEVICE_ID 0x0000 /* Defined by IrDA, IrLMP section 4.1 (page 68) */
+#define IAS_PNP_ID    0xd342
+#define IAS_OBEX_ID   0x34323
+#define IAS_IRLAN_ID  0x34234
+#define IAS_IRCOMM_ID 0x2343
+#define IAS_IRLPT_ID  0x9876
+
+struct net_device;
+struct packet_type;
+
+extern void irda_proc_register(void);
+extern void irda_proc_unregister(void);
+
+extern int irda_sysctl_register(void);
+extern void irda_sysctl_unregister(void);
+
+extern int irsock_init(void);
+extern void irsock_cleanup(void);
+
+extern int irda_nl_register(void);
+extern void irda_nl_unregister(void);
+
+extern int irlap_driver_rcv(struct sk_buff *skb, struct net_device *dev,
+			    struct packet_type *ptype,
+			    struct net_device *orig_dev);
+
+#endif /* NET_IRDA_H */
diff --git a/include/net/irda/irda_device.h b/include/net/irda/irda_device.h
new file mode 100644
index 00000000..94c852d4
--- /dev/null
+++ b/include/net/irda/irda_device.h
@@ -0,0 +1,287 @@
+/*********************************************************************
+ *                
+ * Filename:      irda_device.h
+ * Version:       0.9
+ * Description:   Contains various declarations used by the drivers
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Tue Apr 14 12:41:42 1998
+ * Modified at:   Mon Mar 20 09:08:57 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved.
+ *     Copyright (c) 1998 Thomas Davis, <ratbert@radiks.net>,
+ *     Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+/*
+ * This header contains all the IrDA definitions a driver really
+ * needs, and therefore the driver should not need to include
+ * any other IrDA headers - Jean II
+ */
+
+#ifndef IRDA_DEVICE_H
+#define IRDA_DEVICE_H
+
+#include <linux/tty.h>
+#include <linux/netdevice.h>
+#include <linux/spinlock.h>
+#include <linux/skbuff.h>		/* struct sk_buff */
+#include <linux/irda.h>
+#include <linux/types.h>
+
+#include <net/pkt_sched.h>
+#include <net/irda/irda.h>
+#include <net/irda/qos.h>		/* struct qos_info */
+#include <net/irda/irqueue.h>		/* irda_queue_t */
+
+/* A few forward declarations (to make compiler happy) */
+struct irlap_cb;
+
+/* Some non-standard interface flags (should not conflict with any in if.h) */
+#define IFF_SIR 	0x0001 /* Supports SIR speeds */
+#define IFF_MIR 	0x0002 /* Supports MIR speeds */
+#define IFF_FIR 	0x0004 /* Supports FIR speeds */
+#define IFF_VFIR        0x0008 /* Supports VFIR speeds */
+#define IFF_PIO   	0x0010 /* Supports PIO transfer of data */
+#define IFF_DMA		0x0020 /* Supports DMA transfer of data */
+#define IFF_SHM         0x0040 /* Supports shared memory data transfers */
+#define IFF_DONGLE      0x0080 /* Interface has a dongle attached */
+#define IFF_AIR         0x0100 /* Supports Advanced IR (AIR) standards */
+
+#define IO_XMIT 0x01
+#define IO_RECV 0x02
+
+typedef enum {
+	IRDA_IRLAP, /* IrDA mode, and deliver to IrLAP */
+	IRDA_RAW,   /* IrDA mode */
+	SHARP_ASK,
+	TV_REMOTE,  /* Also known as Consumer Electronics IR */
+} INFRARED_MODE;
+
+typedef enum {
+	IRDA_TASK_INIT,        /* All tasks are initialized with this state */
+	IRDA_TASK_DONE,        /* Signals that the task is finished */
+	IRDA_TASK_WAIT,
+	IRDA_TASK_WAIT1,
+	IRDA_TASK_WAIT2,
+	IRDA_TASK_WAIT3,
+	IRDA_TASK_CHILD_INIT,  /* Initializing child task */
+	IRDA_TASK_CHILD_WAIT,  /* Waiting for child task to finish */
+	IRDA_TASK_CHILD_DONE   /* Child task is finished */
+} IRDA_TASK_STATE;
+
+struct irda_task;
+typedef int (*IRDA_TASK_CALLBACK) (struct irda_task *task);
+
+struct irda_task {
+	irda_queue_t q;
+	magic_t magic;
+
+	IRDA_TASK_STATE state;
+	IRDA_TASK_CALLBACK function;
+	IRDA_TASK_CALLBACK finished;
+
+	struct irda_task *parent;
+	struct timer_list timer;
+
+	void *instance; /* Instance being called */
+	void *param;    /* Parameter to be used by instance */
+};
+
+/* Dongle info */
+struct dongle_reg;
+typedef struct {
+	struct dongle_reg *issue;     /* Registration info */
+	struct net_device *dev;           /* Device we are attached to */
+	struct irda_task *speed_task; /* Task handling speed change */
+	struct irda_task *reset_task; /* Task handling reset */
+	__u32 speed;                  /* Current speed */
+
+	/* Callbacks to the IrDA device driver */
+	int (*set_mode)(struct net_device *, int mode);
+	int (*read)(struct net_device *dev, __u8 *buf, int len);
+	int (*write)(struct net_device *dev, __u8 *buf, int len);
+	int (*set_dtr_rts)(struct net_device *dev, int dtr, int rts);
+} dongle_t;
+
+/* Dongle registration info */
+struct dongle_reg {
+	irda_queue_t q;         /* Must be first */
+	IRDA_DONGLE type;
+
+	void (*open)(dongle_t *dongle, struct qos_info *qos);
+	void (*close)(dongle_t *dongle);
+	int  (*reset)(struct irda_task *task);
+	int  (*change_speed)(struct irda_task *task);
+	struct module *owner;
+};
+
+/* 
+ * Per-packet information we need to hide inside sk_buff 
+ * (must not exceed 48 bytes, check with struct sk_buff)
+ * The default_qdisc_pad field is a temporary hack.
+ */
+struct irda_skb_cb {
+	unsigned int default_qdisc_pad;
+	magic_t magic;       /* Be sure that we can trust the information */
+	__u32   next_speed;  /* The Speed to be set *after* this frame */
+	__u16   mtt;         /* Minimum turn around time */
+	__u16   xbofs;       /* Number of xbofs required, used by SIR mode */
+	__u16   next_xbofs;  /* Number of xbofs required *after* this frame */
+	void    *context;    /* May be used by drivers */
+	void    (*destructor)(struct sk_buff *skb); /* Used for flow control */
+	__u16   xbofs_delay; /* Number of xbofs used for generating the mtt */
+	__u8    line;        /* Used by IrCOMM in IrLPT mode */
+};
+
+/* Chip specific info */
+typedef struct {
+	int cfg_base;         /* Config register IO base */
+        int sir_base;         /* SIR IO base */
+	int fir_base;         /* FIR IO base */
+	int mem_base;         /* Shared memory base */
+        int sir_ext;          /* Length of SIR iobase */
+	int fir_ext;          /* Length of FIR iobase */
+        int irq, irq2;        /* Interrupts used */
+        int dma, dma2;        /* DMA channel(s) used */
+        int fifo_size;        /* FIFO size */
+        int irqflags;         /* interrupt flags (ie, IRQF_SHARED|IRQF_DISABLED) */
+	int direction;        /* Link direction, used by some FIR drivers */
+	int enabled;          /* Powered on? */
+	int suspended;        /* Suspended by APM */
+	__u32 speed;          /* Currently used speed */
+	__u32 new_speed;      /* Speed we must change to when Tx is finished */
+	int dongle_id;        /* Dongle or transceiver currently used */
+} chipio_t;
+
+/* IO buffer specific info (inspired by struct sk_buff) */
+typedef struct {
+	int state;            /* Receiving state (transmit state not used) */
+	int in_frame;         /* True if receiving frame */
+
+	__u8 *head;	      /* start of buffer */
+	__u8 *data;	      /* start of data in buffer */
+
+	int len;	      /* current length of data */
+	int truesize;	      /* total allocated size of buffer */
+	__u16 fcs;
+
+	struct sk_buff *skb;	/* ZeroCopy Rx in async_unwrap_char() */
+} iobuff_t;
+
+/* Maximum SIR frame (skb) that we expect to receive *unwrapped*.
+ * Max LAP MTU (I field) is 2048 bytes max (IrLAP 1.1, chapt 6.6.5, p40).
+ * Max LAP header is 2 bytes (for now).
+ * Max CRC is 2 bytes at SIR, 4 bytes at FIR. 
+ * Need 1 byte for skb_reserve() to align IP header for IrLAN.
+ * Add a few extra bytes just to be safe (buffer is power of two anyway)
+ * Jean II */
+#define IRDA_SKB_MAX_MTU	2064
+/* Maximum SIR frame that we expect to send, wrapped (i.e. with XBOFS
+ * and escaped characters on top of above). */
+#define IRDA_SIR_MAX_FRAME	4269
+
+/* The SIR unwrapper async_unwrap_char() will use a Rx-copy-break mechanism
+ * when using the optional ZeroCopy Rx, where only small frames are memcpy
+ * to a smaller skb to save memory. This is the threshold under which copy
+ * will happen (and over which it won't happen).
+ * Some FIR drivers may use this #define as well...
+ * This is the same value as various Ethernet drivers. - Jean II */
+#define IRDA_RX_COPY_THRESHOLD  256
+
+/* Function prototypes */
+int  irda_device_init(void);
+void irda_device_cleanup(void);
+
+/* IrLAP entry points used by the drivers.
+ * We declare them here to avoid the driver pulling a whole bunch stack
+ * headers they don't really need - Jean II */
+struct irlap_cb *irlap_open(struct net_device *dev, struct qos_info *qos,
+			    const char *hw_name);
+void irlap_close(struct irlap_cb *self);
+
+/* Interface to be uses by IrLAP */
+void irda_device_set_media_busy(struct net_device *dev, int status);
+int  irda_device_is_media_busy(struct net_device *dev);
+int  irda_device_is_receiving(struct net_device *dev);
+
+/* Interface for internal use */
+static inline int irda_device_txqueue_empty(const struct net_device *dev)
+{
+	return qdisc_all_tx_empty(dev);
+}
+int  irda_device_set_raw_mode(struct net_device* self, int status);
+struct net_device *alloc_irdadev(int sizeof_priv);
+
+void irda_setup_dma(int channel, dma_addr_t buffer, int count, int mode);
+
+/*
+ * Function irda_get_mtt (skb)
+ *
+ *    Utility function for getting the minimum turnaround time out of 
+ *    the skb, where it has been hidden in the cb field.
+ */
+static inline __u16 irda_get_mtt(const struct sk_buff *skb)
+{
+	const struct irda_skb_cb *cb = (const struct irda_skb_cb *) skb->cb;
+	return (cb->magic == LAP_MAGIC) ? cb->mtt : 10000;
+}
+
+/*
+ * Function irda_get_next_speed (skb)
+ *
+ *    Extract the speed that should be set *after* this frame from the skb
+ *
+ * Note : return -1 for user space frames
+ */
+static inline __u32 irda_get_next_speed(const struct sk_buff *skb)
+{
+	const struct irda_skb_cb *cb = (const struct irda_skb_cb *) skb->cb;
+	return (cb->magic == LAP_MAGIC) ? cb->next_speed : -1;
+}
+
+/*
+ * Function irda_get_next_xbofs (skb)
+ *
+ *    Extract the xbofs that should be set for this frame from the skb
+ *
+ * Note : default to 10 for user space frames
+ */
+static inline __u16 irda_get_xbofs(const struct sk_buff *skb)
+{
+	const struct irda_skb_cb *cb = (const struct irda_skb_cb *) skb->cb;
+	return (cb->magic == LAP_MAGIC) ? cb->xbofs : 10;
+}
+
+/*
+ * Function irda_get_next_xbofs (skb)
+ *
+ *    Extract the xbofs that should be set *after* this frame from the skb
+ *
+ * Note : return -1 for user space frames
+ */
+static inline __u16 irda_get_next_xbofs(const struct sk_buff *skb)
+{
+	const struct irda_skb_cb *cb = (const struct irda_skb_cb *) skb->cb;
+	return (cb->magic == LAP_MAGIC) ? cb->next_xbofs : -1;
+}
+#endif /* IRDA_DEVICE_H */
+
+
diff --git a/include/net/irda/iriap.h b/include/net/irda/iriap.h
new file mode 100644
index 00000000..fcc89649
--- /dev/null
+++ b/include/net/irda/iriap.h
@@ -0,0 +1,108 @@
+/*********************************************************************
+ *                
+ * Filename:      iriap.h
+ * Version:       0.5
+ * Description:   Information Access Protocol (IAP)
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Thu Aug 21 00:02:07 1997
+ * Modified at:   Sat Dec 25 16:42:09 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1997-1999 Dag Brattli <dagb@cs.uit.no>, 
+ *     All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef IRIAP_H
+#define IRIAP_H
+
+#include <linux/types.h>
+#include <linux/skbuff.h>
+
+#include <net/irda/iriap_event.h>
+#include <net/irda/irias_object.h>
+#include <net/irda/irqueue.h>		/* irda_queue_t */
+#include <net/irda/timer.h>		/* struct timer_list */
+
+#define IAP_LST 0x80
+#define IAP_ACK 0x40
+
+#define IAS_SERVER 0
+#define IAS_CLIENT 1
+
+/* IrIAP Op-codes */
+#define GET_INFO_BASE      0x01
+#define GET_OBJECTS        0x02
+#define GET_VALUE          0x03
+#define GET_VALUE_BY_CLASS 0x04
+#define GET_OBJECT_INFO    0x05
+#define GET_ATTRIB_NAMES   0x06
+
+#define IAS_SUCCESS        0
+#define IAS_CLASS_UNKNOWN  1
+#define IAS_ATTRIB_UNKNOWN 2
+#define IAS_DISCONNECT     10
+
+typedef void (*CONFIRM_CALLBACK)(int result, __u16 obj_id, 
+				 struct ias_value *value, void *priv);
+
+struct iriap_cb {
+	irda_queue_t q; /* Must be first */	
+	magic_t magic;  /* Magic cookie */
+
+	int          mode;   /* Client or server */
+
+	__u32        saddr;
+	__u32        daddr;
+	__u8         operation;
+
+	struct sk_buff *request_skb;
+	struct lsap_cb *lsap;
+	__u8 slsap_sel;
+
+	/* Client states */
+	IRIAP_STATE client_state;
+	IRIAP_STATE call_state;
+	
+	/* Server states */
+	IRIAP_STATE server_state;
+	IRIAP_STATE r_connect_state;
+	
+	CONFIRM_CALLBACK confirm;
+	void *priv;                /* Used to identify client */
+
+	__u8 max_header_size;
+	__u32 max_data_size;
+	
+	struct timer_list watchdog_timer;
+};
+
+int  iriap_init(void);
+void iriap_cleanup(void);
+
+struct iriap_cb *iriap_open(__u8 slsap_sel, int mode, void *priv, 
+			    CONFIRM_CALLBACK callback);
+void iriap_close(struct iriap_cb *self);
+
+int iriap_getvaluebyclass_request(struct iriap_cb *self, 
+				  __u32 saddr, __u32 daddr,
+				  char *name, char *attr);
+void iriap_connect_request(struct iriap_cb *self);
+void iriap_send_ack( struct iriap_cb *self);
+void iriap_call_indication(struct iriap_cb *self, struct sk_buff *skb);
+
+void iriap_register_server(void);
+
+#endif
+
+
diff --git a/include/net/irda/iriap_event.h b/include/net/irda/iriap_event.h
new file mode 100644
index 00000000..89747f06
--- /dev/null
+++ b/include/net/irda/iriap_event.h
@@ -0,0 +1,85 @@
+/*********************************************************************
+ *                
+ * Filename:      iriap_event.h
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Mon Aug  4 20:40:53 1997
+ * Modified at:   Sun Oct 31 22:02:54 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef IRIAP_FSM_H
+#define IRIAP_FSM_H
+
+/* Forward because of circular include dependecies */
+struct iriap_cb;
+
+/* IrIAP states */
+typedef enum {
+	/* Client */
+	S_DISCONNECT,
+	S_CONNECTING,
+	S_CALL,
+
+	/* S-Call */
+	S_MAKE_CALL,
+	S_CALLING,
+	S_OUTSTANDING,
+	S_REPLYING,
+	S_WAIT_FOR_CALL,
+	S_WAIT_ACTIVE,
+
+	/* Server */
+	R_DISCONNECT,
+	R_CALL,
+	
+	/* R-Connect */
+	R_WAITING,
+	R_WAIT_ACTIVE,
+	R_RECEIVING,
+	R_EXECUTE,
+	R_RETURNING,
+} IRIAP_STATE;
+
+typedef enum {
+	IAP_CALL_REQUEST,
+	IAP_CALL_REQUEST_GVBC,
+	IAP_CALL_RESPONSE,
+	IAP_RECV_F_LST,
+	IAP_LM_DISCONNECT_INDICATION,
+	IAP_LM_CONNECT_INDICATION,
+	IAP_LM_CONNECT_CONFIRM,
+} IRIAP_EVENT;
+
+void iriap_next_client_state   (struct iriap_cb *self, IRIAP_STATE state);
+void iriap_next_call_state     (struct iriap_cb *self, IRIAP_STATE state);
+void iriap_next_server_state   (struct iriap_cb *self, IRIAP_STATE state);
+void iriap_next_r_connect_state(struct iriap_cb *self, IRIAP_STATE state);
+
+
+void iriap_do_client_event(struct iriap_cb *self, IRIAP_EVENT event, 
+			   struct sk_buff *skb);
+void iriap_do_call_event  (struct iriap_cb *self, IRIAP_EVENT event, 
+			   struct sk_buff *skb);
+
+void iriap_do_server_event   (struct iriap_cb *self, IRIAP_EVENT event, 
+			      struct sk_buff *skb);
+void iriap_do_r_connect_event(struct iriap_cb *self, IRIAP_EVENT event, 
+			      struct sk_buff *skb);
+
+#endif /* IRIAP_FSM_H */
+
diff --git a/include/net/irda/irias_object.h b/include/net/irda/irias_object.h
new file mode 100644
index 00000000..83f78081
--- /dev/null
+++ b/include/net/irda/irias_object.h
@@ -0,0 +1,108 @@
+/*********************************************************************
+ *                
+ * Filename:      irias_object.h
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Thu Oct  1 22:49:50 1998
+ * Modified at:   Wed Dec 15 11:20:57 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved.
+ *      
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *  
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *     
+ ********************************************************************/
+
+#ifndef LM_IAS_OBJECT_H
+#define LM_IAS_OBJECT_H
+
+#include <net/irda/irda.h>
+#include <net/irda/irqueue.h>
+
+/* LM-IAS Attribute types */
+#define IAS_MISSING 0
+#define IAS_INTEGER 1
+#define IAS_OCT_SEQ 2
+#define IAS_STRING  3
+
+/* Object ownership of attributes (user or kernel) */
+#define IAS_KERNEL_ATTR	0
+#define IAS_USER_ATTR	1
+
+/*
+ *  LM-IAS Object
+ */
+struct ias_object {
+	irda_queue_t q;     /* Must be first! */
+	magic_t magic;
+	
+	char  *name;
+	int   id;
+	hashbin_t *attribs;
+};
+
+/*
+ *  Values used by LM-IAS attributes
+ */
+struct ias_value {
+        __u8    type;    /* Value description */
+	__u8	owner;	/* Managed from user/kernel space */
+	int     charset; /* Only used by string type */
+        int     len;
+	
+	/* Value */
+	union {
+		int integer;
+		char *string;
+		__u8 *oct_seq;
+	} t;
+};
+
+/*
+ *  Attributes used by LM-IAS objects
+ */
+struct ias_attrib {
+	irda_queue_t q; /* Must be first! */
+	int magic;
+
+        char *name;   	         /* Attribute name */
+	struct ias_value *value; /* Attribute value */
+};
+
+struct ias_object *irias_new_object(char *name, int id);
+void irias_insert_object(struct ias_object *obj);
+int  irias_delete_object(struct ias_object *obj);
+int  irias_delete_attrib(struct ias_object *obj, struct ias_attrib *attrib,
+			 int cleanobject);
+void __irias_delete_object(struct ias_object *obj);
+
+void irias_add_integer_attrib(struct ias_object *obj, char *name, int value,
+			      int user);
+void irias_add_string_attrib(struct ias_object *obj, char *name, char *value,
+			     int user);
+void irias_add_octseq_attrib(struct ias_object *obj, char *name, __u8 *octets,
+			     int len, int user);
+int irias_object_change_attribute(char *obj_name, char *attrib_name, 
+				  struct ias_value *new_value);
+struct ias_object *irias_find_object(char *name);
+struct ias_attrib *irias_find_attrib(struct ias_object *obj, char *name);
+
+struct ias_value *irias_new_string_value(char *string);
+struct ias_value *irias_new_integer_value(int integer);
+struct ias_value *irias_new_octseq_value(__u8 *octseq , int len);
+struct ias_value *irias_new_missing_value(void);
+void irias_delete_value(struct ias_value *value);
+
+extern struct ias_value irias_missing;
+extern hashbin_t *irias_objects;
+
+#endif
diff --git a/include/net/irda/irlan_client.h b/include/net/irda/irlan_client.h
new file mode 100644
index 00000000..fa8455ed
--- /dev/null
+++ b/include/net/irda/irlan_client.h
@@ -0,0 +1,42 @@
+/*********************************************************************
+ *                
+ * Filename:      irlan_client.h
+ * Version:       0.3
+ * Description:   IrDA LAN access layer
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun Aug 31 20:14:37 1997
+ * Modified at:   Thu Apr 22 14:13:34 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998 Dag Brattli <dagb@cs.uit.no>, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef IRLAN_CLIENT_H
+#define IRLAN_CLIENT_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+
+#include <net/irda/irias_object.h>
+#include <net/irda/irlan_event.h>
+
+void irlan_client_discovery_indication(discinfo_t *, DISCOVERY_MODE, void *);
+void irlan_client_wakeup(struct irlan_cb *self, __u32 saddr, __u32 daddr);
+
+void irlan_client_parse_response(struct irlan_cb *self, struct sk_buff *skb);
+void irlan_client_get_value_confirm(int result, __u16 obj_id, 
+				    struct ias_value *value, void *priv);
+#endif
diff --git a/include/net/irda/irlan_common.h b/include/net/irda/irlan_common.h
new file mode 100644
index 00000000..0af8b8df
--- /dev/null
+++ b/include/net/irda/irlan_common.h
@@ -0,0 +1,229 @@
+/*********************************************************************
+ *                
+ * Filename:      irlan_common.h
+ * Version:       0.8
+ * Description:   IrDA LAN access layer
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun Aug 31 20:14:37 1997
+ * Modified at:   Sun Oct 31 19:41:24 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, 
+ *     All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef IRLAN_H
+#define IRLAN_H
+
+#include <asm/param.h>  /* for HZ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+
+#include <net/irda/irttp.h>
+
+#define IRLAN_MTU        1518
+#define IRLAN_TIMEOUT    10*HZ /* 10 seconds */
+
+/* Command packet types */
+#define CMD_GET_PROVIDER_INFO   0
+#define CMD_GET_MEDIA_CHAR      1
+#define CMD_OPEN_DATA_CHANNEL   2
+#define CMD_CLOSE_DATA_CHAN     3
+#define CMD_RECONNECT_DATA_CHAN 4
+#define CMD_FILTER_OPERATION    5
+
+/* Some responses */
+#define RSP_SUCCESS                 0
+#define RSP_INSUFFICIENT_RESOURCES  1
+#define RSP_INVALID_COMMAND_FORMAT  2
+#define RSP_COMMAND_NOT_SUPPORTED   3
+#define RSP_PARAM_NOT_SUPPORTED     4
+#define RSP_VALUE_NOT_SUPPORTED     5
+#define RSP_NOT_OPEN                6
+#define RSP_AUTHENTICATION_REQUIRED 7
+#define RSP_INVALID_PASSWORD        8
+#define RSP_PROTOCOL_ERROR          9
+#define RSP_ASYNCHRONOUS_ERROR    255
+
+/* Media types */
+#define MEDIA_802_3 1
+#define MEDIA_802_5 2
+
+/* Filter parameters */
+#define DATA_CHAN   1
+#define FILTER_TYPE 2
+#define FILTER_MODE 3
+
+/* Filter types */
+#define IRLAN_DIRECTED   0x01
+#define IRLAN_FUNCTIONAL 0x02
+#define IRLAN_GROUP      0x04
+#define IRLAN_MAC_FRAME  0x08
+#define IRLAN_MULTICAST  0x10
+#define IRLAN_BROADCAST  0x20
+#define IRLAN_IPX_SOCKET 0x40
+
+/* Filter modes */
+#define ALL     1
+#define FILTER  2
+#define NONE    3
+
+/* Filter operations */
+#define GET     1
+#define CLEAR   2
+#define ADD     3
+#define REMOVE  4
+#define DYNAMIC 5
+
+/* Access types */
+#define ACCESS_DIRECT  1
+#define ACCESS_PEER    2
+#define ACCESS_HOSTED  3
+
+#define IRLAN_BYTE   0
+#define IRLAN_SHORT  1
+#define IRLAN_ARRAY  2
+
+/* IrLAN sits on top if IrTTP */
+#define IRLAN_MAX_HEADER (TTP_HEADER+LMP_HEADER)
+/* 1 byte for the command code and 1 byte for the parameter count */
+#define IRLAN_CMD_HEADER 2
+
+#define IRLAN_STRING_PARAMETER_LEN(name, value) (1 + strlen((name)) + 2 \
+						+ strlen ((value)))
+#define IRLAN_BYTE_PARAMETER_LEN(name)          (1 + strlen((name)) + 2 + 1)
+#define IRLAN_SHORT_PARAMETER_LEN(name)         (1 + strlen((name)) + 2 + 2)
+
+/*
+ *  IrLAN client
+ */
+struct irlan_client_cb {
+	int state;
+
+	int open_retries;
+
+	struct tsap_cb *tsap_ctrl;
+	__u32 max_sdu_size;
+	__u8  max_header_size;
+	
+	int access_type;         /* Access type of provider */
+	__u8 reconnect_key[255];
+	__u8 key_len;
+	
+	__u16 recv_arb_val;
+	__u16 max_frame;
+	int filter_type;
+
+	int unicast_open;
+	int broadcast_open;
+
+	int tx_busy;
+	struct sk_buff_head txq; /* Transmit control queue */
+
+	struct iriap_cb *iriap;
+
+	struct timer_list kick_timer;
+};
+
+/*
+ * IrLAN provider
+ */
+struct irlan_provider_cb {
+	int state;
+	
+	struct tsap_cb *tsap_ctrl;
+	__u32 max_sdu_size;
+	__u8  max_header_size;
+
+	/*
+	 *  Store some values here which are used by the provider to parse
+	 *  the filter operations
+	 */
+	int data_chan;
+	int filter_type;
+	int filter_mode;
+	int filter_operation;
+	int filter_entry;
+	int access_type;     /* Access type */
+	__u16 send_arb_val;
+
+	__u8 mac_address[6]; /* Generated MAC address for peer device */
+};
+
+/*
+ *  IrLAN control block
+ */
+struct irlan_cb {
+	int    magic;
+	struct list_head  dev_list;
+	struct net_device *dev;        /* Ethernet device structure*/
+
+	__u32 saddr;               /* Source device address */
+	__u32 daddr;               /* Destination device address */
+	int disconnect_reason;     /* Why we got disconnected */
+	
+	int media;                 /* Media type */
+	__u8 version[2];           /* IrLAN version */
+	
+	struct tsap_cb *tsap_data; /* Data TSAP */
+
+	int  use_udata;            /* Use Unit Data transfers */
+
+	__u8 stsap_sel_data;       /* Source data TSAP selector */
+	__u8 dtsap_sel_data;       /* Destination data TSAP selector */
+	__u8 dtsap_sel_ctrl;       /* Destination ctrl TSAP selector */
+
+	struct irlan_client_cb   client;   /* Client specific fields */
+	struct irlan_provider_cb provider; /* Provider specific fields */
+
+	__u32 max_sdu_size;
+	__u8  max_header_size;
+	
+	wait_queue_head_t open_wait;
+	struct timer_list watchdog_timer;
+};
+
+void irlan_close(struct irlan_cb *self);
+void irlan_close_tsaps(struct irlan_cb *self);
+
+int  irlan_register_netdev(struct irlan_cb *self);
+void irlan_ias_register(struct irlan_cb *self, __u8 tsap_sel);
+void irlan_start_watchdog_timer(struct irlan_cb *self, int timeout);
+
+void irlan_open_data_tsap(struct irlan_cb *self);
+
+int irlan_run_ctrl_tx_queue(struct irlan_cb *self);
+
+struct irlan_cb *irlan_get_any(void);
+void irlan_get_provider_info(struct irlan_cb *self);
+void irlan_get_media_char(struct irlan_cb *self);
+void irlan_open_data_channel(struct irlan_cb *self);
+void irlan_close_data_channel(struct irlan_cb *self);
+void irlan_set_multicast_filter(struct irlan_cb *self, int status);
+void irlan_set_broadcast_filter(struct irlan_cb *self, int status);
+
+int irlan_insert_byte_param(struct sk_buff *skb, char *param, __u8 value);
+int irlan_insert_short_param(struct sk_buff *skb, char *param, __u16 value);
+int irlan_insert_string_param(struct sk_buff *skb, char *param, char *value);
+int irlan_insert_array_param(struct sk_buff *skb, char *name, __u8 *value, 
+			     __u16 value_len);
+
+int irlan_extract_param(__u8 *buf, char *name, char *value, __u16 *len);
+
+#endif
+
+
diff --git a/include/net/irda/irlan_eth.h b/include/net/irda/irlan_eth.h
new file mode 100644
index 00000000..de5c8169
--- /dev/null
+++ b/include/net/irda/irlan_eth.h
@@ -0,0 +1,32 @@
+/*********************************************************************
+ *                
+ * Filename:      irlan_eth.h
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Thu Oct 15 08:36:58 1998
+ * Modified at:   Fri May 14 23:29:00 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved.
+ *      
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *  
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *     
+ ********************************************************************/
+
+#ifndef IRLAN_ETH_H
+#define IRLAN_ETH_H
+
+struct net_device *alloc_irlandev(const char *name);
+int  irlan_eth_receive(void *instance, void *sap, struct sk_buff *skb);
+
+void irlan_eth_flow_indication( void *instance, void *sap, LOCAL_FLOW flow);
+#endif
diff --git a/include/net/irda/irlan_event.h b/include/net/irda/irlan_event.h
new file mode 100644
index 00000000..018b5a77
--- /dev/null
+++ b/include/net/irda/irlan_event.h
@@ -0,0 +1,81 @@
+/*********************************************************************
+ *                
+ * Filename:      irlan_event.h
+ * Version:       
+ * Description:   LAN access
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun Aug 31 20:14:37 1997
+ * Modified at:   Tue Feb  2 09:45:17 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1997 Dag Brattli <dagb@cs.uit.no>, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef IRLAN_EVENT_H
+#define IRLAN_EVENT_H
+
+#include <linux/kernel.h>
+#include <linux/skbuff.h>
+
+#include <net/irda/irlan_common.h>
+
+typedef enum {
+	IRLAN_IDLE,
+	IRLAN_QUERY,
+	IRLAN_CONN, 
+	IRLAN_INFO,
+	IRLAN_MEDIA,
+	IRLAN_OPEN,
+	IRLAN_WAIT,
+	IRLAN_ARB, 
+	IRLAN_DATA,
+	IRLAN_CLOSE,
+	IRLAN_SYNC
+} IRLAN_STATE;
+
+typedef enum {
+	IRLAN_DISCOVERY_INDICATION,
+	IRLAN_IAS_PROVIDER_AVAIL,
+	IRLAN_IAS_PROVIDER_NOT_AVAIL,
+	IRLAN_LAP_DISCONNECT,
+	IRLAN_LMP_DISCONNECT,
+	IRLAN_CONNECT_COMPLETE,
+	IRLAN_DATA_INDICATION,
+	IRLAN_DATA_CONNECT_INDICATION,
+	IRLAN_RETRY_CONNECT,
+
+	IRLAN_CONNECT_INDICATION,
+	IRLAN_GET_INFO_CMD,
+	IRLAN_GET_MEDIA_CMD,
+	IRLAN_OPEN_DATA_CMD,
+	IRLAN_FILTER_CONFIG_CMD,
+
+	IRLAN_CHECK_CON_ARB,
+	IRLAN_PROVIDER_SIGNAL,
+
+	IRLAN_WATCHDOG_TIMEOUT,
+} IRLAN_EVENT;
+
+extern const char * const irlan_state[];
+
+void irlan_do_client_event(struct irlan_cb *self, IRLAN_EVENT event, 
+			   struct sk_buff *skb);
+
+void irlan_do_provider_event(struct irlan_cb *self, IRLAN_EVENT event, 
+			     struct sk_buff *skb);
+
+void irlan_next_client_state(struct irlan_cb *self, IRLAN_STATE state);
+void irlan_next_provider_state(struct irlan_cb *self, IRLAN_STATE state);
+
+#endif
diff --git a/include/net/irda/irlan_filter.h b/include/net/irda/irlan_filter.h
new file mode 100644
index 00000000..a5a25394
--- /dev/null
+++ b/include/net/irda/irlan_filter.h
@@ -0,0 +1,35 @@
+/*********************************************************************
+ *                
+ * Filename:      irlan_filter.h
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Fri Jan 29 15:24:08 1999
+ * Modified at:   Sun Feb  7 23:35:31 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998 Dag Brattli, All Rights Reserved.
+ *      
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *  
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *     
+ ********************************************************************/
+
+#ifndef IRLAN_FILTER_H
+#define IRLAN_FILTER_H
+
+void irlan_check_command_param(struct irlan_cb *self, char *param, 
+			       char *value);
+void irlan_filter_request(struct irlan_cb *self, struct sk_buff *skb);
+#ifdef CONFIG_PROC_FS
+void irlan_print_filter(struct seq_file *seq, int filter_type);
+#endif
+
+#endif /* IRLAN_FILTER_H */
diff --git a/include/net/irda/irlan_provider.h b/include/net/irda/irlan_provider.h
new file mode 100644
index 00000000..92f3b0e1
--- /dev/null
+++ b/include/net/irda/irlan_provider.h
@@ -0,0 +1,52 @@
+/*********************************************************************
+ *                
+ * Filename:      irlan_provider.h
+ * Version:       0.1
+ * Description:   IrDA LAN access layer
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun Aug 31 20:14:37 1997
+ * Modified at:   Sun May  9 12:26:11 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef IRLAN_SERVER_H
+#define IRLAN_SERVER_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+
+#include <net/irda/irlan_common.h>
+
+void irlan_provider_ctrl_disconnect_indication(void *instance, void *sap, 
+					       LM_REASON reason, 
+					       struct sk_buff *skb);
+
+
+void irlan_provider_connect_response(struct irlan_cb *, struct tsap_cb *);
+
+int irlan_parse_open_data_cmd(struct irlan_cb *self, struct sk_buff *skb);
+int irlan_provider_parse_command(struct irlan_cb *self, int cmd,
+				 struct sk_buff *skb);
+
+void irlan_provider_send_reply(struct irlan_cb *self, int command, 
+			       int ret_code);
+int irlan_provider_open_ctrl_tsap(struct irlan_cb *self);
+
+#endif
+
+
diff --git a/include/net/irda/irlap.h b/include/net/irda/irlap.h
new file mode 100644
index 00000000..fb4b76d5
--- /dev/null
+++ b/include/net/irda/irlap.h
@@ -0,0 +1,311 @@
+/*********************************************************************
+ *                
+ * Filename:      irlap.h
+ * Version:       0.8
+ * Description:   An IrDA LAP driver for Linux
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Mon Aug  4 20:40:53 1997
+ * Modified at:   Fri Dec 10 13:21:17 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, 
+ *     All Rights Reserved.
+ *     Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com>
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef IRLAP_H
+#define IRLAP_H
+
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/timer.h>
+
+#include <net/irda/irqueue.h>		/* irda_queue_t */
+#include <net/irda/qos.h>		/* struct qos_info */
+#include <net/irda/discovery.h>		/* discovery_t */
+#include <net/irda/irlap_event.h>	/* IRLAP_STATE, ... */
+#include <net/irda/irmod.h>		/* struct notify_t */
+
+#define CONFIG_IRDA_DYNAMIC_WINDOW 1
+
+#define LAP_RELIABLE   1
+#define LAP_UNRELIABLE 0
+
+#define LAP_ADDR_HEADER 1  /* IrLAP Address Header */
+#define LAP_CTRL_HEADER 1  /* IrLAP Control Header */
+
+/* May be different when we get VFIR */
+#define LAP_MAX_HEADER (LAP_ADDR_HEADER + LAP_CTRL_HEADER)
+
+/* Each IrDA device gets a random 32 bits IRLAP device address */
+#define LAP_ALEN 4
+
+#define BROADCAST  0xffffffff /* Broadcast device address */
+#define CBROADCAST 0xfe       /* Connection broadcast address */
+#define XID_FORMAT 0x01       /* Discovery XID format */
+
+/* Nobody seems to use this constant. */
+#define LAP_WINDOW_SIZE 8
+/* We keep the LAP queue very small to minimise the amount of buffering.
+ * this improve latency and reduce resource consumption.
+ * This work only because we have synchronous refilling of IrLAP through
+ * the flow control mechanism (via scheduler and IrTTP).
+ * 2 buffers is the minimum we can work with, one that we send while polling
+ * IrTTP, and another to know that we should not send the pf bit.
+ * Jean II */
+#define LAP_HIGH_THRESHOLD     2
+/* Some rare non TTP clients don't implement flow control, and
+ * so don't comply with the above limit (and neither with this one).
+ * For IAP and management, it doesn't matter, because they never transmit much.
+ *.For IrLPT, this should be fixed.
+ * - Jean II */
+#define LAP_MAX_QUEUE 10
+/* Please note that all IrDA management frames (LMP/TTP conn req/disc and
+ * IAS queries) fall in the second category and are sent to LAP even if TTP
+ * is stopped. This means that those frames will wait only a maximum of
+ * two (2) data frames before beeing sent on the "wire", which speed up
+ * new socket setup when the link is saturated.
+ * Same story for two sockets competing for the medium : if one saturates
+ * the LAP, when the other want to transmit it only has to wait for
+ * maximum three (3) packets (2 + one scheduling), which improve performance
+ * of delay sensitive applications.
+ * Jean II */
+
+#define NR_EXPECTED     1
+#define NR_UNEXPECTED   0
+#define NR_INVALID     -1
+
+#define NS_EXPECTED     1
+#define NS_UNEXPECTED   0
+#define NS_INVALID     -1
+
+/*
+ *  Meta information passed within the IrLAP state machine
+ */
+struct irlap_info {
+	__u8 caddr;   /* Connection address */
+	__u8 control; /* Frame type */
+        __u8 cmd;
+
+	__u32 saddr;
+	__u32 daddr;
+	
+	int pf;        /* Poll/final bit set */
+
+	__u8  nr;      /* Sequence number of next frame expected */
+	__u8  ns;      /* Sequence number of frame sent */
+
+	int  S;        /* Number of slots */
+	int  slot;     /* Random chosen slot */
+	int  s;        /* Current slot */
+
+	discovery_t *discovery; /* Discovery information */
+};
+
+/* Main structure of IrLAP */
+struct irlap_cb {
+	irda_queue_t q;     /* Must be first */
+	magic_t magic;
+
+	/* Device we are attached to */
+	struct net_device  *netdev;
+	char		hw_name[2*IFNAMSIZ + 1];
+
+	/* Connection state */
+	volatile IRLAP_STATE state;       /* Current state */
+
+	/* Timers used by IrLAP */
+	struct timer_list query_timer;
+	struct timer_list slot_timer;
+	struct timer_list discovery_timer;
+	struct timer_list final_timer;
+	struct timer_list poll_timer;
+	struct timer_list wd_timer;
+	struct timer_list backoff_timer;
+
+	/* Media busy stuff */
+	struct timer_list media_busy_timer;
+	int media_busy;
+
+	/* Timeouts which will be different with different turn time */
+	int slot_timeout;
+	int poll_timeout;
+	int final_timeout;
+	int wd_timeout;
+
+	struct sk_buff_head txq;  /* Frames to be transmitted */
+	struct sk_buff_head txq_ultra;
+
+ 	__u8    caddr;        /* Connection address */
+	__u32   saddr;        /* Source device address */
+	__u32   daddr;        /* Destination device address */
+
+	int     retry_count;  /* Times tried to establish connection */
+	int     add_wait;     /* True if we are waiting for frame */
+
+	__u8    connect_pending;
+	__u8    disconnect_pending;
+
+	/*  To send a faster RR if tx queue empty */
+#ifdef CONFIG_IRDA_FAST_RR
+	int     fast_RR_timeout;
+	int     fast_RR;      
+#endif /* CONFIG_IRDA_FAST_RR */
+	
+	int N1; /* N1 * F-timer = Negitiated link disconnect warning threshold */
+	int N2; /* N2 * F-timer = Negitiated link disconnect time */
+	int N3; /* Connection retry count */
+
+	int     local_busy;
+	int     remote_busy;
+	int     xmitflag;
+
+	__u8    vs;            /* Next frame to be sent */
+	__u8    vr;            /* Next frame to be received */
+	__u8    va;            /* Last frame acked */
+ 	int     window;        /* Nr of I-frames allowed to send */
+	int     window_size;   /* Current negotiated window size */
+
+#ifdef CONFIG_IRDA_DYNAMIC_WINDOW
+	__u32   line_capacity; /* Number of bytes allowed to send */
+	__u32   bytes_left;    /* Number of bytes still allowed to transmit */
+#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */
+
+	struct sk_buff_head wx_list;
+
+	__u8    ack_required;
+	
+	/* XID parameters */
+ 	__u8    S;           /* Number of slots */
+	__u8    slot;        /* Random chosen slot */
+ 	__u8    s;           /* Current slot */
+	int     frame_sent;  /* Have we sent reply? */
+
+	hashbin_t   *discovery_log;
+ 	discovery_t *discovery_cmd;
+
+	__u32 speed;		/* Link speed */
+
+	struct qos_info  qos_tx;   /* QoS requested by peer */
+	struct qos_info  qos_rx;   /* QoS requested by self */
+	struct qos_info *qos_dev;  /* QoS supported by device */
+
+	notify_t notify; /* Callbacks to IrLMP */
+
+	int    mtt_required;  /* Minimum turnaround time required */
+	int    xbofs_delay;   /* Nr of XBOF's used to MTT */
+	int    bofs_count;    /* Negotiated extra BOFs */
+	int    next_bofs;     /* Negotiated extra BOFs after next frame */
+
+	int    mode;     /* IrLAP mode (primary, secondary or monitor) */
+};
+
+/* 
+ *  Function prototypes 
+ */
+int irlap_init(void);
+void irlap_cleanup(void);
+
+struct irlap_cb *irlap_open(struct net_device *dev, struct qos_info *qos,
+			    const char *hw_name);
+void irlap_close(struct irlap_cb *self);
+
+void irlap_connect_request(struct irlap_cb *self, __u32 daddr, 
+			   struct qos_info *qos, int sniff);
+void irlap_connect_response(struct irlap_cb *self, struct sk_buff *skb);
+void irlap_connect_indication(struct irlap_cb *self, struct sk_buff *skb);
+void irlap_connect_confirm(struct irlap_cb *, struct sk_buff *skb);
+
+void irlap_data_indication(struct irlap_cb *, struct sk_buff *, int unreliable);
+void irlap_data_request(struct irlap_cb *, struct sk_buff *, int unreliable);
+
+#ifdef CONFIG_IRDA_ULTRA
+void irlap_unitdata_request(struct irlap_cb *, struct sk_buff *);
+void irlap_unitdata_indication(struct irlap_cb *, struct sk_buff *);
+#endif /* CONFIG_IRDA_ULTRA */
+
+void irlap_disconnect_request(struct irlap_cb *);
+void irlap_disconnect_indication(struct irlap_cb *, LAP_REASON reason);
+
+void irlap_status_indication(struct irlap_cb *, int quality_of_link);
+
+void irlap_test_request(__u8 *info, int len);
+
+void irlap_discovery_request(struct irlap_cb *, discovery_t *discovery);
+void irlap_discovery_confirm(struct irlap_cb *, hashbin_t *discovery_log);
+void irlap_discovery_indication(struct irlap_cb *, discovery_t *discovery);
+
+void irlap_reset_indication(struct irlap_cb *self);
+void irlap_reset_confirm(void);
+
+void irlap_update_nr_received(struct irlap_cb *, int nr);
+int irlap_validate_nr_received(struct irlap_cb *, int nr);
+int irlap_validate_ns_received(struct irlap_cb *, int ns);
+
+int  irlap_generate_rand_time_slot(int S, int s);
+void irlap_initiate_connection_state(struct irlap_cb *);
+void irlap_flush_all_queues(struct irlap_cb *);
+void irlap_wait_min_turn_around(struct irlap_cb *, struct qos_info *);
+
+void irlap_apply_default_connection_parameters(struct irlap_cb *self);
+void irlap_apply_connection_parameters(struct irlap_cb *self, int now);
+
+#define IRLAP_GET_HEADER_SIZE(self) (LAP_MAX_HEADER)
+#define IRLAP_GET_TX_QUEUE_LEN(self) skb_queue_len(&self->txq)
+
+/* Return TRUE if the node is in primary mode (i.e. master)
+ * - Jean II */
+static inline int irlap_is_primary(struct irlap_cb *self)
+{
+	int ret;
+	switch(self->state) {
+	case LAP_XMIT_P:
+	case LAP_NRM_P:
+		ret = 1;
+		break;
+	case LAP_XMIT_S:
+	case LAP_NRM_S:
+		ret = 0;
+		break;
+	default:
+		ret = -1;
+	}
+	return ret;
+}
+
+/* Clear a pending IrLAP disconnect. - Jean II */
+static inline void irlap_clear_disconnect(struct irlap_cb *self)
+{
+	self->disconnect_pending = FALSE;
+}
+
+/*
+ * Function irlap_next_state (self, state)
+ *
+ *    Switches state and provides debug information
+ *
+ */
+static inline void irlap_next_state(struct irlap_cb *self, IRLAP_STATE state)
+{
+	/*
+	if (!self || self->magic != LAP_MAGIC)
+		return;
+
+	IRDA_DEBUG(4, "next LAP state = %s\n", irlap_state[state]);
+	*/
+	self->state = state;
+}
+
+#endif
diff --git a/include/net/irda/irlap_event.h b/include/net/irda/irlap_event.h
new file mode 100644
index 00000000..4c90824c
--- /dev/null
+++ b/include/net/irda/irlap_event.h
@@ -0,0 +1,131 @@
+/*********************************************************************
+ *                
+ *                
+ * Filename:      irlap_event.h
+ * Version:       0.1
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sat Aug 16 00:59:29 1997
+ * Modified at:   Tue Dec 21 11:20:30 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, 
+ *     All Rights Reserved.
+ *     Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com>
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#ifndef IRLAP_EVENT_H
+#define IRLAP_EVENT_H
+
+#include <net/irda/irda.h>
+
+/* A few forward declarations (to make compiler happy) */
+struct irlap_cb;
+struct irlap_info;
+
+/* IrLAP States */
+typedef enum {
+	LAP_NDM,         /* Normal disconnected mode */
+	LAP_QUERY,
+	LAP_REPLY,
+	LAP_CONN,        /* Connect indication */
+	LAP_SETUP,       /* Setting up connection */
+	LAP_OFFLINE,     /* A really boring state */
+	LAP_XMIT_P,
+	LAP_PCLOSE,
+	LAP_NRM_P,       /* Normal response mode as primary */
+	LAP_RESET_WAIT,
+	LAP_RESET,
+	LAP_NRM_S,       /* Normal response mode as secondary */
+	LAP_XMIT_S,
+	LAP_SCLOSE,
+	LAP_RESET_CHECK,
+} IRLAP_STATE;
+
+/* IrLAP Events */
+typedef enum {
+	/* Services events */
+	DISCOVERY_REQUEST,
+	CONNECT_REQUEST,
+	CONNECT_RESPONSE,
+	DISCONNECT_REQUEST,
+	DATA_REQUEST,
+	RESET_REQUEST,
+	RESET_RESPONSE,
+
+	/* Send events */
+	SEND_I_CMD,
+	SEND_UI_FRAME,
+
+	/* Receive events */
+	RECV_DISCOVERY_XID_CMD,
+	RECV_DISCOVERY_XID_RSP,
+	RECV_SNRM_CMD,
+	RECV_TEST_CMD,
+	RECV_TEST_RSP,
+	RECV_UA_RSP,
+	RECV_DM_RSP,
+	RECV_RD_RSP,
+	RECV_I_CMD,
+	RECV_I_RSP,
+	RECV_UI_FRAME,
+	RECV_FRMR_RSP,
+	RECV_RR_CMD,
+	RECV_RR_RSP,
+	RECV_RNR_CMD,
+	RECV_RNR_RSP,
+	RECV_REJ_CMD,
+	RECV_REJ_RSP,
+	RECV_SREJ_CMD,
+	RECV_SREJ_RSP,
+	RECV_DISC_CMD,
+
+	/* Timer events */
+	SLOT_TIMER_EXPIRED,
+	QUERY_TIMER_EXPIRED,
+	FINAL_TIMER_EXPIRED,
+	POLL_TIMER_EXPIRED,
+	DISCOVERY_TIMER_EXPIRED,
+	WD_TIMER_EXPIRED,
+	BACKOFF_TIMER_EXPIRED,
+	MEDIA_BUSY_TIMER_EXPIRED,
+} IRLAP_EVENT;
+
+/*
+ * Disconnect reason code
+ */
+typedef enum { /* FIXME check the two first reason codes */
+	LAP_DISC_INDICATION=1, /* Received a disconnect request from peer */
+	LAP_NO_RESPONSE,       /* To many retransmits without response */
+	LAP_RESET_INDICATION,  /* To many retransmits, or invalid nr/ns */
+	LAP_FOUND_NONE,        /* No devices were discovered */
+	LAP_MEDIA_BUSY,
+	LAP_PRIMARY_CONFLICT,
+} LAP_REASON;
+
+extern const char *const irlap_state[];
+
+void irlap_do_event(struct irlap_cb *self, IRLAP_EVENT event, 
+		    struct sk_buff *skb, struct irlap_info *info);
+void irlap_print_event(IRLAP_EVENT event);
+
+extern int irlap_qos_negotiate(struct irlap_cb *self, struct sk_buff *skb);
+
+#endif
diff --git a/include/net/irda/irlap_frame.h b/include/net/irda/irlap_frame.h
new file mode 100644
index 00000000..6b1dc4f8
--- /dev/null
+++ b/include/net/irda/irlap_frame.h
@@ -0,0 +1,169 @@
+/*********************************************************************
+ *                
+ * Filename:      irlap_frame.h
+ * Version:       0.9
+ * Description:   IrLAP frame declarations
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Tue Aug 19 10:27:26 1997
+ * Modified at:   Sat Dec 25 21:07:26 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1997-1999 Dag Brattli <dagb@cs.uit.no>,
+ *     All Rights Reserved.
+ *     Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com>
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#ifndef IRLAP_FRAME_H
+#define IRLAP_FRAME_H
+
+#include <linux/skbuff.h>
+
+#include <net/irda/irda.h>
+
+/* A few forward declarations (to make compiler happy) */
+struct irlap_cb;
+struct discovery_t;
+
+/* Frame types and templates */
+#define INVALID   0xff
+
+/* Unnumbered (U) commands */
+#define SNRM_CMD  0x83 /* Set Normal Response Mode */
+#define DISC_CMD  0x43 /* Disconnect */
+#define XID_CMD   0x2f /* Exchange Station Identification */
+#define TEST_CMD  0xe3 /* Test */
+
+/* Unnumbered responses */
+#define RNRM_RSP  0x83 /* Request Normal Response Mode */
+#define UA_RSP    0x63 /* Unnumbered Acknowledgement */
+#define FRMR_RSP  0x87 /* Frame Reject */
+#define DM_RSP    0x0f /* Disconnect Mode */
+#define RD_RSP    0x43 /* Request Disconnection */
+#define XID_RSP   0xaf /* Exchange Station Identification */
+#define TEST_RSP  0xe3 /* Test frame */
+
+/* Supervisory (S) */
+#define RR        0x01 /* Receive Ready */
+#define REJ       0x09 /* Reject */
+#define RNR       0x05 /* Receive Not Ready */
+#define SREJ      0x0d /* Selective Reject */
+
+/* Information (I) */
+#define I_FRAME   0x00 /* Information Format */
+#define UI_FRAME  0x03 /* Unnumbered Information */
+
+#define CMD_FRAME 0x01
+#define RSP_FRAME 0x00
+
+#define PF_BIT    0x10 /* Poll/final bit */
+
+/* Some IrLAP field lengths */
+/*
+ * Only baud rate triplet is 4 bytes (PV can be 2 bytes).
+ * All others params (7) are 3 bytes, so that's 7*3 + 1*4 bytes.
+ */
+#define IRLAP_NEGOCIATION_PARAMS_LEN 25
+#define IRLAP_DISCOVERY_INFO_LEN     32
+
+struct disc_frame {
+	__u8 caddr;          /* Connection address */
+	__u8 control;
+} __packed;
+
+struct xid_frame {
+	__u8  caddr; /* Connection address */
+	__u8  control;
+	__u8  ident; /* Should always be XID_FORMAT */ 
+	__le32 saddr; /* Source device address */
+	__le32 daddr; /* Destination device address */
+	__u8  flags; /* Discovery flags */
+	__u8  slotnr;
+	__u8  version;
+} __packed;
+
+struct test_frame {
+	__u8 caddr;          /* Connection address */
+	__u8 control;
+	__le32 saddr;         /* Source device address */
+	__le32 daddr;         /* Destination device address */
+} __packed;
+
+struct ua_frame {
+	__u8 caddr;
+	__u8 control;
+	__le32 saddr; /* Source device address */
+	__le32 daddr; /* Dest device address */
+} __packed;
+
+struct dm_frame {
+	__u8 caddr;          /* Connection address */
+	__u8 control;
+} __packed;
+
+struct rd_frame {
+	__u8 caddr;          /* Connection address */
+	__u8 control;
+} __packed;
+
+struct rr_frame {
+	__u8 caddr;          /* Connection address */
+	__u8 control;
+} __packed;
+
+struct i_frame {
+	__u8 caddr;
+	__u8 control;
+} __packed;
+
+struct snrm_frame {
+	__u8  caddr;
+	__u8  control;
+	__le32 saddr;
+	__le32 daddr;
+	__u8  ncaddr;
+} __packed;
+
+void irlap_queue_xmit(struct irlap_cb *self, struct sk_buff *skb);
+void irlap_send_discovery_xid_frame(struct irlap_cb *, int S, __u8 s, 
+				    __u8 command,
+				    struct discovery_t *discovery);
+void irlap_send_snrm_frame(struct irlap_cb *, struct qos_info *);
+void irlap_send_test_frame(struct irlap_cb *self, __u8 caddr, __u32 daddr, 
+			   struct sk_buff *cmd);
+void irlap_send_ua_response_frame(struct irlap_cb *, struct qos_info *);
+void irlap_send_dm_frame(struct irlap_cb *self);
+void irlap_send_rd_frame(struct irlap_cb *self);
+void irlap_send_disc_frame(struct irlap_cb *self);
+void irlap_send_rr_frame(struct irlap_cb *self, int command);
+
+void irlap_send_data_primary(struct irlap_cb *, struct sk_buff *);
+void irlap_send_data_primary_poll(struct irlap_cb *, struct sk_buff *);
+void irlap_send_data_secondary(struct irlap_cb *, struct sk_buff *);
+void irlap_send_data_secondary_final(struct irlap_cb *, struct sk_buff *);
+void irlap_resend_rejected_frames(struct irlap_cb *, int command);
+void irlap_resend_rejected_frame(struct irlap_cb *self, int command);
+
+void irlap_send_ui_frame(struct irlap_cb *self, struct sk_buff *skb,
+			 __u8 caddr, int command);
+
+extern int irlap_insert_qos_negotiation_params(struct irlap_cb *self, 
+					       struct sk_buff *skb);
+
+#endif
diff --git a/include/net/irda/irlmp.h b/include/net/irda/irlmp.h
new file mode 100644
index 00000000..fff11b7f
--- /dev/null
+++ b/include/net/irda/irlmp.h
@@ -0,0 +1,294 @@
+/*********************************************************************
+ *                
+ * Filename:      irlmp.h
+ * Version:       0.9
+ * Description:   IrDA Link Management Protocol (LMP) layer
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun Aug 17 20:54:32 1997
+ * Modified at:   Fri Dec 10 13:23:01 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, 
+ *     All Rights Reserved.
+ *     Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com>
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef IRLMP_H
+#define IRLMP_H
+
+#include <asm/param.h>  /* for HZ */
+
+#include <linux/types.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/qos.h>
+#include <net/irda/irlap.h>		/* LAP_MAX_HEADER, ... */
+#include <net/irda/irlmp_event.h>
+#include <net/irda/irqueue.h>
+#include <net/irda/discovery.h>
+
+/* LSAP-SEL's */
+#define LSAP_MASK     0x7f
+#define LSAP_IAS      0x00
+#define LSAP_ANY      0xff
+#define LSAP_MAX      0x6f /* 0x70-0x7f are reserved */
+#define LSAP_CONNLESS 0x70 /* Connectionless LSAP, mostly used for Ultra */
+
+#define DEV_ADDR_ANY  0xffffffff
+
+#define LMP_HEADER          2    /* Dest LSAP + Source LSAP */
+#define LMP_CONTROL_HEADER  4    /* LMP_HEADER + opcode + parameter */
+#define LMP_PID_HEADER      1    /* Used by Ultra */
+#define LMP_MAX_HEADER      (LMP_CONTROL_HEADER+LAP_MAX_HEADER)
+
+#define LM_MAX_CONNECTIONS  10
+
+#define LM_IDLE_TIMEOUT     2*HZ /* 2 seconds for now */
+
+typedef enum {
+	S_PNP = 0,
+	S_PDA,
+	S_COMPUTER,
+	S_PRINTER,
+	S_MODEM,
+	S_FAX,
+	S_LAN,
+	S_TELEPHONY,
+	S_COMM,
+	S_OBEX,
+	S_ANY,
+	S_END,
+} SERVICE;
+
+/* For selective discovery */
+typedef void (*DISCOVERY_CALLBACK1) (discinfo_t *, DISCOVERY_MODE, void *);
+/* For expiry (the same) */
+typedef void (*DISCOVERY_CALLBACK2) (discinfo_t *, DISCOVERY_MODE, void *);
+
+typedef struct {
+	irda_queue_t queue; /* Must be first */
+
+	__u16_host_order hints; /* Hint bits */
+} irlmp_service_t;
+
+typedef struct {
+	irda_queue_t queue; /* Must be first */
+
+	__u16_host_order hint_mask;
+
+	DISCOVERY_CALLBACK1 disco_callback;	/* Selective discovery */
+	DISCOVERY_CALLBACK2 expir_callback;	/* Selective expiration */
+	void *priv;                /* Used to identify client */
+} irlmp_client_t;
+
+/*
+ *  Information about each logical LSAP connection
+ */
+struct lsap_cb {
+	irda_queue_t queue;      /* Must be first */
+	magic_t magic;
+
+	unsigned long connected;	/* set_bit used on this */
+	int  persistent;
+
+	__u8 slsap_sel;   /* Source (this) LSAP address */
+	__u8 dlsap_sel;   /* Destination LSAP address (if connected) */
+#ifdef CONFIG_IRDA_ULTRA
+	__u8 pid;         /* Used by connectionless LSAP */
+#endif /* CONFIG_IRDA_ULTRA */
+	struct sk_buff *conn_skb; /* Store skb here while connecting */
+
+	struct timer_list watchdog_timer;
+
+	LSAP_STATE      lsap_state;  /* Connection state */
+	notify_t        notify;      /* Indication/Confirm entry points */
+	struct qos_info qos;         /* QoS for this connection */
+
+	struct lap_cb *lap; /* Pointer to LAP connection structure */
+};
+
+/*
+ *  Used for caching the last slsap->dlsap->handle mapping
+ *
+ * We don't need to keep/match the remote address in the cache because
+ * we are associated with a specific LAP (which implies it).
+ * Jean II
+ */
+typedef struct {
+	int valid;
+
+	__u8 slsap_sel;
+	__u8 dlsap_sel;
+	struct lsap_cb *lsap;
+} CACHE_ENTRY;
+
+/*
+ *  Information about each registred IrLAP layer
+ */
+struct lap_cb {
+	irda_queue_t queue; /* Must be first */
+	magic_t magic;
+
+	int reason;    /* LAP disconnect reason */
+
+	IRLMP_STATE lap_state;
+
+	struct irlap_cb *irlap;   /* Instance of IrLAP layer */
+	hashbin_t *lsaps;         /* LSAP associated with this link */
+	struct lsap_cb *flow_next;	/* Next lsap to be polled for Tx */
+
+	__u8  caddr;  /* Connection address */
+ 	__u32 saddr;  /* Source device address */
+ 	__u32 daddr;  /* Destination device address */
+	
+	struct qos_info *qos;  /* LAP QoS for this session */
+	struct timer_list idle_timer;
+	
+#ifdef CONFIG_IRDA_CACHE_LAST_LSAP
+	/* The lsap cache was moved from struct irlmp_cb to here because
+	 * it must be associated with the specific LAP. Also, this
+	 * improves performance. - Jean II */
+	CACHE_ENTRY cache;  /* Caching last slsap->dlsap->handle mapping */
+#endif
+};
+
+/*
+ *  Main structure for IrLMP
+ */
+struct irlmp_cb {
+	magic_t magic;
+
+	__u8 conflict_flag;
+	
+	discovery_t discovery_cmd; /* Discovery command to use by IrLAP */
+	discovery_t discovery_rsp; /* Discovery response to use by IrLAP */
+
+	/* Last lsap picked automatically by irlmp_find_free_slsap() */
+	int	last_lsap_sel;
+
+	struct timer_list discovery_timer;
+
+ 	hashbin_t *links;         /* IrLAP connection table */
+	hashbin_t *unconnected_lsaps;
+ 	hashbin_t *clients;
+	hashbin_t *services;
+
+	hashbin_t *cachelog;	/* Current discovery log */
+
+	int running;
+
+	__u16_host_order hints; /* Hint bits */
+};
+
+/* Prototype declarations */
+int  irlmp_init(void);
+void irlmp_cleanup(void);
+struct lsap_cb *irlmp_open_lsap(__u8 slsap, notify_t *notify, __u8 pid);
+void irlmp_close_lsap( struct lsap_cb *self);
+
+__u16 irlmp_service_to_hint(int service);
+void *irlmp_register_service(__u16 hints);
+int irlmp_unregister_service(void *handle);
+void *irlmp_register_client(__u16 hint_mask, DISCOVERY_CALLBACK1 disco_clb,
+			    DISCOVERY_CALLBACK2 expir_clb, void *priv);
+int irlmp_unregister_client(void *handle);
+int irlmp_update_client(void *handle, __u16 hint_mask, 
+			DISCOVERY_CALLBACK1 disco_clb,
+			DISCOVERY_CALLBACK2 expir_clb, void *priv);
+
+void irlmp_register_link(struct irlap_cb *, __u32 saddr, notify_t *);
+void irlmp_unregister_link(__u32 saddr);
+
+int  irlmp_connect_request(struct lsap_cb *, __u8 dlsap_sel, 
+			   __u32 saddr, __u32 daddr,
+			   struct qos_info *, struct sk_buff *);
+void irlmp_connect_indication(struct lsap_cb *self, struct sk_buff *skb);
+int  irlmp_connect_response(struct lsap_cb *, struct sk_buff *);
+void irlmp_connect_confirm(struct lsap_cb *, struct sk_buff *);
+struct lsap_cb *irlmp_dup(struct lsap_cb *self, void *instance);
+
+void irlmp_disconnect_indication(struct lsap_cb *self, LM_REASON reason, 
+				 struct sk_buff *userdata);
+int  irlmp_disconnect_request(struct lsap_cb *, struct sk_buff *userdata);
+
+void irlmp_discovery_confirm(hashbin_t *discovery_log, DISCOVERY_MODE mode);
+void irlmp_discovery_request(int nslots);
+discinfo_t *irlmp_get_discoveries(int *pn, __u16 mask, int nslots);
+void irlmp_do_expiry(void);
+void irlmp_do_discovery(int nslots);
+discovery_t *irlmp_get_discovery_response(void);
+void irlmp_discovery_expiry(discinfo_t *expiry, int number);
+
+int  irlmp_data_request(struct lsap_cb *, struct sk_buff *);
+void irlmp_data_indication(struct lsap_cb *, struct sk_buff *);
+
+int  irlmp_udata_request(struct lsap_cb *, struct sk_buff *);
+void irlmp_udata_indication(struct lsap_cb *, struct sk_buff *);
+
+#ifdef CONFIG_IRDA_ULTRA
+int  irlmp_connless_data_request(struct lsap_cb *, struct sk_buff *, __u8);
+void irlmp_connless_data_indication(struct lsap_cb *, struct sk_buff *);
+#endif /* CONFIG_IRDA_ULTRA */
+
+void irlmp_status_indication(struct lap_cb *, LINK_STATUS link, LOCK_STATUS lock);
+void irlmp_flow_indication(struct lap_cb *self, LOCAL_FLOW flow);
+
+LM_REASON irlmp_convert_lap_reason(LAP_REASON);
+
+static inline __u32 irlmp_get_saddr(const struct lsap_cb *self)
+{
+	return (self && self->lap) ? self->lap->saddr : 0;
+}
+
+static inline __u32 irlmp_get_daddr(const struct lsap_cb *self)
+{
+	return (self && self->lap) ? self->lap->daddr : 0;
+}
+
+extern const char *irlmp_reasons[];
+extern int sysctl_discovery_timeout;
+extern int sysctl_discovery_slots;
+extern int sysctl_discovery;
+extern int sysctl_lap_keepalive_time;	/* in ms, default is LM_IDLE_TIMEOUT */
+extern struct irlmp_cb *irlmp;
+
+/* Check if LAP queue is full.
+ * Used by IrTTP for low control, see comments in irlap.h - Jean II */
+static inline int irlmp_lap_tx_queue_full(struct lsap_cb *self)
+{
+	if (self == NULL)
+		return 0;
+	if (self->lap == NULL)
+		return 0;
+	if (self->lap->irlap == NULL)
+		return 0;
+
+	return IRLAP_GET_TX_QUEUE_LEN(self->lap->irlap) >= LAP_HIGH_THRESHOLD;
+}
+
+/* After doing a irlmp_dup(), this get one of the two socket back into
+ * a state where it's waiting incomming connections.
+ * Note : this can be used *only* if the socket is not yet connected
+ * (i.e. NO irlmp_connect_response() done on this socket).
+ * - Jean II */
+static inline void irlmp_listen(struct lsap_cb *self)
+{
+	self->dlsap_sel = LSAP_ANY;
+	self->lap = NULL;
+	self->lsap_state = LSAP_DISCONNECTED;
+	/* Started when we received the LM_CONNECT_INDICATION */
+	del_timer(&self->watchdog_timer);
+}
+
+#endif
diff --git a/include/net/irda/irlmp_event.h b/include/net/irda/irlmp_event.h
new file mode 100644
index 00000000..9e4ec17a
--- /dev/null
+++ b/include/net/irda/irlmp_event.h
@@ -0,0 +1,98 @@
+/*********************************************************************
+ *                
+ * Filename:      irlmp_event.h
+ * Version:       0.1
+ * Description:   IrDA-LMP event handling
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Mon Aug  4 20:40:53 1997
+ * Modified at:   Thu Jul  8 12:18:54 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1997, 1999 Dag Brattli <dagb@cs.uit.no>, 
+ *     All Rights Reserved.
+ *     Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com>
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef IRLMP_EVENT_H
+#define IRLMP_EVENT_H
+
+/* A few forward declarations (to make compiler happy) */
+struct irlmp_cb;
+struct lsap_cb;
+struct lap_cb;
+struct discovery_t;
+
+/* LAP states */
+typedef enum {
+	/* IrLAP connection control states */
+	LAP_STANDBY,             /* No LAP connection */
+	LAP_U_CONNECT,           /* Starting LAP connection */
+	LAP_ACTIVE,              /* LAP connection is active */
+} IRLMP_STATE;
+
+/* LSAP connection control states */
+typedef enum {
+	LSAP_DISCONNECTED,        /* No LSAP connection */
+	LSAP_CONNECT,             /* Connect indication from peer */
+	LSAP_CONNECT_PEND,        /* Connect request from service user */
+	LSAP_DATA_TRANSFER_READY, /* LSAP connection established */          
+	LSAP_SETUP,               /* Trying to set up LSAP connection */
+	LSAP_SETUP_PEND,          /* Request to start LAP connection */
+} LSAP_STATE;
+
+typedef enum {
+	/* LSAP events */
+ 	LM_CONNECT_REQUEST,
+ 	LM_CONNECT_CONFIRM,
+	LM_CONNECT_RESPONSE,
+ 	LM_CONNECT_INDICATION, 	
+	
+	LM_DISCONNECT_INDICATION,
+	LM_DISCONNECT_REQUEST,
+
+ 	LM_DATA_REQUEST,
+	LM_UDATA_REQUEST,
+ 	LM_DATA_INDICATION,
+	LM_UDATA_INDICATION,
+
+	LM_WATCHDOG_TIMEOUT,
+
+	/* IrLAP events */
+	LM_LAP_CONNECT_REQUEST,
+ 	LM_LAP_CONNECT_INDICATION, 
+ 	LM_LAP_CONNECT_CONFIRM,
+ 	LM_LAP_DISCONNECT_INDICATION, 
+	LM_LAP_DISCONNECT_REQUEST,
+	LM_LAP_DISCOVERY_REQUEST,
+ 	LM_LAP_DISCOVERY_CONFIRM,
+	LM_LAP_IDLE_TIMEOUT,
+} IRLMP_EVENT;
+
+extern const char *const irlmp_state[];
+extern const char *const irlsap_state[];
+
+void irlmp_watchdog_timer_expired(void *data);
+void irlmp_discovery_timer_expired(void *data);
+void irlmp_idle_timer_expired(void *data);
+
+void irlmp_do_lap_event(struct lap_cb *self, IRLMP_EVENT event, 
+			struct sk_buff *skb);
+int irlmp_do_lsap_event(struct lsap_cb *self, IRLMP_EVENT event, 
+			struct sk_buff *skb);
+
+#endif /* IRLMP_EVENT_H */
+
+
+
+
diff --git a/include/net/irda/irlmp_frame.h b/include/net/irda/irlmp_frame.h
new file mode 100644
index 00000000..1906eb71
--- /dev/null
+++ b/include/net/irda/irlmp_frame.h
@@ -0,0 +1,62 @@
+/*********************************************************************
+ *                
+ * Filename:      irlmp_frame.h
+ * Version:       0.9
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Tue Aug 19 02:09:59 1997
+ * Modified at:   Fri Dec 10 13:21:53 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1997, 1999 Dag Brattli <dagb@cs.uit.no>, 
+ *     All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef IRMLP_FRAME_H
+#define IRMLP_FRAME_H
+
+#include <linux/skbuff.h>
+
+#include <net/irda/discovery.h>
+
+/* IrLMP frame opcodes */
+#define CONNECT_CMD    0x01
+#define CONNECT_CNF    0x81
+#define DISCONNECT     0x02
+#define ACCESSMODE_CMD 0x03
+#define ACCESSMODE_CNF 0x83
+
+#define CONTROL_BIT    0x80
+
+void irlmp_send_data_pdu(struct lap_cb *self, __u8 dlsap, __u8 slsap,
+				int expedited, struct sk_buff *skb);
+void irlmp_send_lcf_pdu(struct lap_cb *self, __u8 dlsap, __u8 slsap, 
+			__u8 opcode, struct sk_buff *skb);
+void irlmp_link_data_indication(struct lap_cb *, struct sk_buff *, 
+				int unreliable);
+#ifdef CONFIG_IRDA_ULTRA
+void irlmp_link_unitdata_indication(struct lap_cb *, struct sk_buff *);
+#endif /* CONFIG_IRDA_ULTRA */
+
+void irlmp_link_connect_indication(struct lap_cb *, __u32 saddr, __u32 daddr,
+				   struct qos_info *qos, struct sk_buff *skb);
+void irlmp_link_connect_request(__u32 daddr);
+void irlmp_link_connect_confirm(struct lap_cb *self, struct qos_info *qos, 
+				struct sk_buff *skb);
+void irlmp_link_disconnect_indication(struct lap_cb *, struct irlap_cb *, 
+				      LAP_REASON reason, struct sk_buff *); 
+void irlmp_link_discovery_confirm(struct lap_cb *self, hashbin_t *log);
+void irlmp_link_discovery_indication(struct lap_cb *, discovery_t *discovery);
+
+#endif
diff --git a/include/net/irda/irmod.h b/include/net/irda/irmod.h
new file mode 100644
index 00000000..86f0dbb8
--- /dev/null
+++ b/include/net/irda/irmod.h
@@ -0,0 +1,109 @@
+/*********************************************************************
+ *                
+ * Filename:      irmod.h
+ * Version:       0.3
+ * Description:   IrDA module and utilities functions
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Mon Dec 15 13:58:52 1997
+ * Modified at:   Fri Jan 28 13:15:24 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ *
+ *     Copyright (c) 1998-2000 Dag Brattli, All Rights Reserved.
+ *     Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com>
+ *      
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *  
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charg.
+ *     
+ ********************************************************************/
+
+#ifndef IRMOD_H
+#define IRMOD_H
+
+/* Misc status information */
+typedef enum {
+	STATUS_OK,
+	STATUS_ABORTED,
+	STATUS_NO_ACTIVITY,
+	STATUS_NOISY,
+	STATUS_REMOTE,
+} LINK_STATUS;
+
+typedef enum {
+	LOCK_NO_CHANGE,
+	LOCK_LOCKED,
+	LOCK_UNLOCKED,
+} LOCK_STATUS;
+
+typedef enum { FLOW_STOP, FLOW_START } LOCAL_FLOW;
+
+/*  
+ *  IrLMP disconnect reasons. The order is very important, since they 
+ *  correspond to disconnect reasons sent in IrLMP disconnect frames, so
+ *  please do not touch :-)
+ */
+typedef enum {
+	LM_USER_REQUEST = 1,  /* User request */
+	LM_LAP_DISCONNECT,    /* Unexpected IrLAP disconnect */
+	LM_CONNECT_FAILURE,   /* Failed to establish IrLAP connection */
+	LM_LAP_RESET,         /* IrLAP reset */
+	LM_INIT_DISCONNECT,   /* Link Management initiated disconnect */
+	LM_LSAP_NOTCONN,      /* Data delivered on unconnected LSAP */
+	LM_NON_RESP_CLIENT,   /* Non responsive LM-MUX client */
+	LM_NO_AVAIL_CLIENT,   /* No available LM-MUX client */
+	LM_CONN_HALF_OPEN,    /* Connection is half open */
+	LM_BAD_SOURCE_ADDR,   /* Illegal source address (i.e 0x00) */
+} LM_REASON;
+#define LM_UNKNOWN 0xff       /* Unspecified disconnect reason */
+
+/* A few forward declarations (to make compiler happy) */
+struct qos_info;		/* in <net/irda/qos.h> */
+
+/*
+ *  Notify structure used between transport and link management layers
+ */
+typedef struct {
+	int (*data_indication)(void *priv, void *sap, struct sk_buff *skb);
+	int (*udata_indication)(void *priv, void *sap, struct sk_buff *skb);
+	void (*connect_confirm)(void *instance, void *sap, 
+				struct qos_info *qos, __u32 max_sdu_size,
+				__u8 max_header_size, struct sk_buff *skb);
+	void (*connect_indication)(void *instance, void *sap, 
+				   struct qos_info *qos, __u32 max_sdu_size, 
+				   __u8 max_header_size, struct sk_buff *skb);
+	void (*disconnect_indication)(void *instance, void *sap, 
+				      LM_REASON reason, struct sk_buff *);
+	void (*flow_indication)(void *instance, void *sap, LOCAL_FLOW flow);
+	void (*status_indication)(void *instance,
+				  LINK_STATUS link, LOCK_STATUS lock);
+	void *instance; /* Layer instance pointer */
+	char name[16];  /* Name of layer */
+} notify_t;
+
+#define NOTIFY_MAX_NAME 16
+
+/* Zero the notify structure */
+void irda_notify_init(notify_t *notify);
+
+/* Locking wrapper - Note the inverted logic on irda_lock().
+ * Those function basically return false if the lock is already in the
+ * position you want to set it. - Jean II */
+#define irda_lock(lock)		(! test_and_set_bit(0, (void *) (lock)))
+#define irda_unlock(lock)	(test_and_clear_bit(0, (void *) (lock)))
+
+#endif /* IRMOD_H */
+
+
+
+
+
+
+
+
+
diff --git a/include/net/irda/irqueue.h b/include/net/irda/irqueue.h
new file mode 100644
index 00000000..37f512bd
--- /dev/null
+++ b/include/net/irda/irqueue.h
@@ -0,0 +1,96 @@
+/*********************************************************************
+ *                
+ * Filename:      irqueue.h
+ * Version:       0.3
+ * Description:   General queue implementation
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Tue Jun  9 13:26:50 1998
+ * Modified at:   Thu Oct  7 13:25:16 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (C) 1998-1999, Aage Kvalnes <aage@cs.uit.no>
+ *     Copyright (c) 1998, Dag Brattli
+ *     All Rights Reserved.
+ *      
+ *     This code is taken from the Vortex Operating System written by Aage
+ *     Kvalnes and has been ported to Linux and Linux/IR by Dag Brattli
+ *
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *  
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *     
+ ********************************************************************/
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+
+#ifndef IRDA_QUEUE_H
+#define IRDA_QUEUE_H
+
+#define NAME_SIZE      32
+
+/*
+ * Hash types (some flags can be xored)
+ * See comments in irqueue.c for which one to use...
+ */
+#define HB_NOLOCK	0	/* No concurent access prevention */
+#define HB_LOCK		1	/* Prevent concurent write with global lock */
+
+/*
+ * Hash defines
+ */
+#define HASHBIN_SIZE   8
+#define HASHBIN_MASK   0x7
+
+#ifndef IRDA_ALIGN 
+#define IRDA_ALIGN __attribute__((aligned))
+#endif
+
+#define Q_NULL { NULL, NULL, "", 0 }
+
+typedef void (*FREE_FUNC)(void *arg);
+
+struct irda_queue {
+	struct irda_queue *q_next;
+	struct irda_queue *q_prev;
+
+	char   q_name[NAME_SIZE];
+	long   q_hash;			/* Must be able to cast a (void *) */
+};
+typedef struct irda_queue irda_queue_t;
+
+typedef struct hashbin_t {
+	__u32      magic;
+	int        hb_type;
+	int        hb_size;
+	spinlock_t hb_spinlock;		/* HB_LOCK - Can be used by the user */
+
+	irda_queue_t* hb_queue[HASHBIN_SIZE] IRDA_ALIGN;
+
+	irda_queue_t* hb_current;
+} hashbin_t;
+
+hashbin_t *hashbin_new(int type);
+int      hashbin_delete(hashbin_t* hashbin, FREE_FUNC func);
+int      hashbin_clear(hashbin_t* hashbin, FREE_FUNC free_func);
+void     hashbin_insert(hashbin_t* hashbin, irda_queue_t* entry, long hashv, 
+			const char* name);
+void*    hashbin_remove(hashbin_t* hashbin, long hashv, const char* name);
+void*    hashbin_remove_first(hashbin_t *hashbin);
+void*	 hashbin_remove_this( hashbin_t* hashbin, irda_queue_t* entry);
+void*    hashbin_find(hashbin_t* hashbin, long hashv, const char* name);
+void*    hashbin_lock_find(hashbin_t* hashbin, long hashv, const char* name);
+void*    hashbin_find_next(hashbin_t* hashbin, long hashv, const char* name,
+			   void ** pnext);
+irda_queue_t *hashbin_get_first(hashbin_t *hashbin);
+irda_queue_t *hashbin_get_next(hashbin_t *hashbin);
+
+#define HASHBIN_GET_SIZE(hashbin) hashbin->hb_size
+
+#endif
diff --git a/include/net/irda/irttp.h b/include/net/irda/irttp.h
new file mode 100644
index 00000000..af4b8772
--- /dev/null
+++ b/include/net/irda/irttp.h
@@ -0,0 +1,210 @@
+/*********************************************************************
+ *                
+ * Filename:      irttp.h
+ * Version:       1.0
+ * Description:   Tiny Transport Protocol (TTP) definitions
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun Aug 31 20:14:31 1997
+ * Modified at:   Sun Dec 12 13:09:07 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, 
+ *     All Rights Reserved.
+ *     Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com>
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef IRTTP_H
+#define IRTTP_H
+
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irlmp.h>		/* struct lsap_cb */
+#include <net/irda/qos.h>		/* struct qos_info */
+#include <net/irda/irqueue.h>
+
+#define TTP_MAX_CONNECTIONS    LM_MAX_CONNECTIONS
+#define TTP_HEADER             1
+#define TTP_MAX_HEADER         (TTP_HEADER + LMP_MAX_HEADER)
+#define TTP_SAR_HEADER         5
+#define TTP_PARAMETERS         0x80
+#define TTP_MORE               0x80
+
+/* Transmission queue sizes */
+/* Worst case scenario, two window of data - Jean II */
+#define TTP_TX_MAX_QUEUE	14
+/* We need to keep at least 5 frames to make sure that we can refill
+ * appropriately the LAP layer. LAP keeps only two buffers, and we need
+ * to have 7 to make a full window - Jean II */
+#define TTP_TX_LOW_THRESHOLD	5
+/* Most clients are synchronous with respect to flow control, so we can
+ * keep a low number of Tx buffers in TTP - Jean II */
+#define TTP_TX_HIGH_THRESHOLD	7
+
+/* Receive queue sizes */
+/* Minimum of credit that the peer should hold.
+ * If the peer has less credits than 9 frames, we will explicitly send
+ * him some credits (through irttp_give_credit() and a specific frame).
+ * Note that when we give credits it's likely that it won't be sent in
+ * this LAP window, but in the next one. So, we make sure that the peer
+ * has something to send while waiting for credits (one LAP window == 7
+ * + 1 frames while he process the credits). - Jean II */
+#define TTP_RX_MIN_CREDIT	8
+/* This is the default maximum number of credits held by the peer, so the
+ * default maximum number of frames he can send us before needing flow
+ * control answer from us (this may be negociated differently at TSAP setup).
+ * We want to minimise the number of times we have to explicitly send some
+ * credit to the peer, hoping we can piggyback it on the return data. In
+ * particular, it doesn't make sense for us to send credit more than once
+ * per LAP window.
+ * Moreover, giving credits has some latency, so we need strictly more than
+ * a LAP window, otherwise we may already have credits in our Tx queue.
+ * But on the other hand, we don't want to keep too many Rx buffer here
+ * before starting to flow control the other end, so make it exactly one
+ * LAP window + 1 + MIN_CREDITS. - Jean II */
+#define TTP_RX_DEFAULT_CREDIT	16
+/* Maximum number of credits we can allow the peer to have, and therefore
+ * maximum Rx queue size.
+ * Note that we try to deliver packets to the higher layer every time we
+ * receive something, so in normal mode the Rx queue will never contains
+ * more than one or two packets. - Jean II */
+#define TTP_RX_MAX_CREDIT	21
+
+/* What clients should use when calling ttp_open_tsap() */
+#define DEFAULT_INITIAL_CREDIT	TTP_RX_DEFAULT_CREDIT
+
+/* Some priorities for disconnect requests */
+#define P_NORMAL    0
+#define P_HIGH      1
+
+#define TTP_SAR_DISABLE 0
+#define TTP_SAR_UNBOUND 0xffffffff
+
+/* Parameters */
+#define TTP_MAX_SDU_SIZE 0x01
+
+/*
+ *  This structure contains all data associated with one instance of a TTP 
+ *  connection.
+ */
+struct tsap_cb {
+	irda_queue_t q;            /* Must be first */
+	magic_t magic;        /* Just in case */
+
+	__u8 stsap_sel;       /* Source TSAP */
+	__u8 dtsap_sel;       /* Destination TSAP */
+
+	struct lsap_cb *lsap; /* Corresponding LSAP to this TSAP */
+
+	__u8 connected;       /* TSAP connected */
+	 
+	__u8 initial_credit;  /* Initial credit to give peer */
+
+        int avail_credit;    /* Available credit to return to peer */
+	int remote_credit;   /* Credit held by peer TTP entity */
+	int send_credit;     /* Credit held by local TTP entity */
+	
+	struct sk_buff_head tx_queue; /* Frames to be transmitted */
+	struct sk_buff_head rx_queue; /* Received frames */
+	struct sk_buff_head rx_fragments;
+	int tx_queue_lock;
+	int rx_queue_lock;
+	spinlock_t lock;
+
+	notify_t notify;       /* Callbacks to client layer */
+
+	struct net_device_stats stats;
+	struct timer_list todo_timer; 
+
+	__u32 max_seg_size;     /* Max data that fit into an IrLAP frame */
+	__u8  max_header_size;
+
+	int   rx_sdu_busy;     /* RxSdu.busy */
+	__u32 rx_sdu_size;     /* Current size of a partially received frame */
+	__u32 rx_max_sdu_size; /* Max receive user data size */
+
+	int tx_sdu_busy;       /* TxSdu.busy */
+	__u32 tx_max_sdu_size; /* Max transmit user data size */
+
+	int close_pend;        /* Close, but disconnect_pend */
+	unsigned long disconnect_pend; /* Disconnect, but still data to send */
+	struct sk_buff *disconnect_skb;
+};
+
+struct irttp_cb {
+	magic_t    magic;	
+	hashbin_t *tsaps;
+};
+
+int  irttp_init(void);
+void irttp_cleanup(void);
+
+struct tsap_cb *irttp_open_tsap(__u8 stsap_sel, int credit, notify_t *notify);
+int irttp_close_tsap(struct tsap_cb *self);
+
+int irttp_data_request(struct tsap_cb *self, struct sk_buff *skb);
+int irttp_udata_request(struct tsap_cb *self, struct sk_buff *skb);
+
+int irttp_connect_request(struct tsap_cb *self, __u8 dtsap_sel, 
+			  __u32 saddr, __u32 daddr,
+			  struct qos_info *qos, __u32 max_sdu_size, 
+			  struct sk_buff *userdata);
+int irttp_connect_response(struct tsap_cb *self, __u32 max_sdu_size, 
+			    struct sk_buff *userdata);
+int irttp_disconnect_request(struct tsap_cb *self, struct sk_buff *skb,
+			     int priority);
+void irttp_flow_request(struct tsap_cb *self, LOCAL_FLOW flow);
+struct tsap_cb *irttp_dup(struct tsap_cb *self, void *instance);
+
+static inline __u32 irttp_get_saddr(struct tsap_cb *self)
+{
+	return irlmp_get_saddr(self->lsap);
+}
+
+static inline __u32 irttp_get_daddr(struct tsap_cb *self)
+{
+	return irlmp_get_daddr(self->lsap);
+}
+
+static inline __u32 irttp_get_max_seg_size(struct tsap_cb *self)
+{
+	return self->max_seg_size;
+}
+
+/* After doing a irttp_dup(), this get one of the two socket back into
+ * a state where it's waiting incomming connections.
+ * Note : this can be used *only* if the socket is not yet connected
+ * (i.e. NO irttp_connect_response() done on this socket).
+ * - Jean II */
+static inline void irttp_listen(struct tsap_cb *self)
+{
+	irlmp_listen(self->lsap);
+	self->dtsap_sel = LSAP_ANY;
+}
+
+/* Return TRUE if the node is in primary mode (i.e. master)
+ * - Jean II */
+static inline int irttp_is_primary(struct tsap_cb *self)
+{
+	if ((self == NULL) ||
+	    (self->lsap == NULL) ||
+	    (self->lsap->lap == NULL) ||
+	    (self->lsap->lap->irlap == NULL))
+		return -2;
+	return irlap_is_primary(self->lsap->lap->irlap);
+}
+
+#endif /* IRTTP_H */
diff --git a/include/net/irda/parameters.h b/include/net/irda/parameters.h
new file mode 100644
index 00000000..c0d93884
--- /dev/null
+++ b/include/net/irda/parameters.h
@@ -0,0 +1,102 @@
+/*********************************************************************
+ *                
+ * Filename:      parameters.h
+ * Version:       1.0
+ * Description:   A more general way to handle (pi,pl,pv) parameters
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Mon Jun  7 08:47:28 1999
+ * Modified at:   Sun Jan 30 14:05:14 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *
+ *     Michel Dänzer <daenzer@debian.org>, 10/2001
+ *     - simplify irda_pv_t to avoid endianness issues
+ *     
+ ********************************************************************/
+
+#ifndef IRDA_PARAMS_H
+#define IRDA_PARAMS_H
+
+/*
+ *  The currently supported types. Beware not to change the sequence since
+ *  it a good reason why the sized integers has a value equal to their size
+ */
+typedef enum {
+	PV_INTEGER,      /* Integer of any (pl) length */
+	PV_INT_8_BITS,   /* Integer of 8 bits in length */
+	PV_INT_16_BITS,  /* Integer of 16 bits in length */
+	PV_STRING,       /* \0 terminated string */
+	PV_INT_32_BITS,  /* Integer of 32 bits in length */
+	PV_OCT_SEQ,      /* Octet sequence */
+	PV_NO_VALUE      /* Does not contain any value (pl=0) */
+} PV_TYPE;
+
+/* Bit 7 of type field */
+#define PV_BIG_ENDIAN    0x80 
+#define PV_LITTLE_ENDIAN 0x00
+#define PV_MASK          0x7f   /* To mask away endian bit */
+
+#define PV_PUT 0
+#define PV_GET 1
+
+typedef union {
+	char   *c;
+	__u32   i;
+	__u32 *ip;
+} irda_pv_t;
+
+typedef struct {
+	__u8 pi;
+	__u8 pl;
+	irda_pv_t pv;
+} irda_param_t;
+
+typedef int (*PI_HANDLER)(void *self, irda_param_t *param, int get);
+typedef int (*PV_HANDLER)(void *self, __u8 *buf, int len, __u8 pi,
+			  PV_TYPE type, PI_HANDLER func);
+
+typedef struct {
+	PI_HANDLER func;  /* Handler for this parameter identifier */
+	PV_TYPE    type;  /* Data type for this parameter */
+} pi_minor_info_t;
+
+typedef struct {
+	pi_minor_info_t *pi_minor_call_table;
+	int len;
+} pi_major_info_t;
+
+typedef struct {
+	pi_major_info_t *tables;
+	int              len;
+	__u8             pi_mask;
+	int              pi_major_offset;
+} pi_param_info_t;
+
+int irda_param_pack(__u8 *buf, char *fmt, ...);
+
+int irda_param_insert(void *self, __u8 pi, __u8 *buf, int len, 
+		      pi_param_info_t *info);
+int irda_param_extract_all(void *self, __u8 *buf, int len, 
+			   pi_param_info_t *info);
+
+#define irda_param_insert_byte(buf,pi,pv) irda_param_pack(buf,"bbb",pi,1,pv)
+
+#endif /* IRDA_PARAMS_H */
+
diff --git a/include/net/irda/qos.h b/include/net/irda/qos.h
new file mode 100644
index 00000000..cc577dc0
--- /dev/null
+++ b/include/net/irda/qos.h
@@ -0,0 +1,103 @@
+/*********************************************************************
+ *                
+ * Filename:      qos.h
+ * Version:       1.0
+ * Description:   Quality of Service definitions
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Fri Sep 19 23:21:09 1997
+ * Modified at:   Thu Dec  2 13:51:54 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#ifndef IRDA_QOS_H
+#define IRDA_QOS_H
+
+#include <linux/skbuff.h>
+
+#include <net/irda/parameters.h>
+
+#define PI_BAUD_RATE     0x01
+#define PI_MAX_TURN_TIME 0x82
+#define PI_DATA_SIZE     0x83
+#define PI_WINDOW_SIZE   0x84
+#define PI_ADD_BOFS      0x85
+#define PI_MIN_TURN_TIME 0x86
+#define PI_LINK_DISC     0x08
+
+#define IR_115200_MAX 0x3f
+
+/* Baud rates (first byte) */
+#define IR_2400     0x01
+#define IR_9600     0x02
+#define IR_19200    0x04
+#define IR_38400    0x08
+#define IR_57600    0x10
+#define IR_115200   0x20
+#define IR_576000   0x40
+#define IR_1152000  0x80
+
+/* Baud rates (second byte) */
+#define IR_4000000  0x01
+#define IR_16000000 0x02
+
+/* Quality of Service information */
+typedef struct {
+	__u32 value;
+	__u16 bits; /* LSB is first byte, MSB is second byte */
+} qos_value_t;
+
+struct qos_info {
+	magic_t magic;
+
+	qos_value_t baud_rate;       /* IR_11520O | ... */
+	qos_value_t max_turn_time;
+	qos_value_t data_size;
+	qos_value_t window_size;
+	qos_value_t additional_bofs;
+	qos_value_t min_turn_time;
+	qos_value_t link_disc_time;
+	
+	qos_value_t power;
+};
+
+extern int sysctl_max_baud_rate;
+extern int sysctl_max_inactive_time;
+
+void irda_init_max_qos_capabilies(struct qos_info *qos);
+void irda_qos_compute_intersection(struct qos_info *, struct qos_info *);
+
+__u32 irlap_max_line_capacity(__u32 speed, __u32 max_turn_time);
+
+void irda_qos_bits_to_value(struct qos_info *qos);
+
+/* So simple, how could we not inline those two ?
+ * Note : one byte is 10 bits if you include start and stop bits
+ * Jean II */
+#define irlap_min_turn_time_in_bytes(speed, min_turn_time) (	\
+	speed * min_turn_time / 10000000			\
+)
+#define irlap_xbofs_in_usec(speed, xbofs) (			\
+	xbofs * 10000000 / speed				\
+)
+
+#endif
+
diff --git a/include/net/irda/timer.h b/include/net/irda/timer.h
new file mode 100644
index 00000000..cb2615cc
--- /dev/null
+++ b/include/net/irda/timer.h
@@ -0,0 +1,105 @@
+/*********************************************************************
+ *                
+ * Filename:      timer.h
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sat Aug 16 00:59:29 1997
+ * Modified at:   Thu Oct  7 12:25:24 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1997, 1998-1999 Dag Brattli <dagb@cs.uit.no>, 
+ *     All Rights Reserved.
+ *     Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com>
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef TIMER_H
+#define TIMER_H
+
+#include <linux/timer.h>
+#include <linux/jiffies.h>
+
+#include <asm/param.h>  /* for HZ */
+
+#include <net/irda/irda.h>
+
+/* A few forward declarations (to make compiler happy) */
+struct irlmp_cb;
+struct irlap_cb;
+struct lsap_cb;
+struct lap_cb;
+
+/* 
+ *  Timeout definitions, some defined in IrLAP 6.13.5 - p. 92
+ */
+#define POLL_TIMEOUT        (450*HZ/1000)    /* Must never exceed 500 ms */
+#define FINAL_TIMEOUT       (500*HZ/1000)    /* Must never exceed 500 ms */
+
+/* 
+ *  Normally twice of p-timer. Note 3, IrLAP 6.3.11.2 - p. 60 suggests
+ *  at least twice duration of the P-timer.
+ */
+#define WD_TIMEOUT          (POLL_TIMEOUT*2)
+
+#define MEDIABUSY_TIMEOUT   (500*HZ/1000)    /* 500 msec */
+#define SMALLBUSY_TIMEOUT   (100*HZ/1000)    /* 100 msec - IrLAP 6.13.4 */
+
+/*
+ *  Slot timer must never exceed 85 ms, and must always be at least 25 ms, 
+ *  suggested to  75-85 msec by IrDA lite. This doesn't work with a lot of
+ *  devices, and other stackes uses a lot more, so it's best we do it as well
+ *  (Note : this is the default value and sysctl overides it - Jean II)
+ */
+#define SLOT_TIMEOUT            (90*HZ/1000)
+
+/* 
+ *  The latest discovery frame (XID) is longer due to the extra discovery
+ *  information (hints, device name...). This is its extra length.
+ *  We use that when setting the query timeout. Jean II
+ */
+#define XIDEXTRA_TIMEOUT        (34*HZ/1000)  /* 34 msec */
+
+#define WATCHDOG_TIMEOUT        (20*HZ)       /* 20 sec */
+
+typedef void (*TIMER_CALLBACK)(void *);
+
+static inline void irda_start_timer(struct timer_list *ptimer, int timeout, 
+				    void* data, TIMER_CALLBACK callback)
+{
+	ptimer->function = (void (*)(unsigned long)) callback;
+	ptimer->data = (unsigned long) data;
+	
+	/* Set new value for timer (update or add timer).
+	 * We use mod_timer() because it's more efficient and also
+	 * safer with respect to race conditions - Jean II */
+	mod_timer(ptimer, jiffies + timeout);
+}
+
+
+void irlap_start_slot_timer(struct irlap_cb *self, int timeout);
+void irlap_start_query_timer(struct irlap_cb *self, int S, int s);
+void irlap_start_final_timer(struct irlap_cb *self, int timeout);
+void irlap_start_wd_timer(struct irlap_cb *self, int timeout);
+void irlap_start_backoff_timer(struct irlap_cb *self, int timeout);
+
+void irlap_start_mbusy_timer(struct irlap_cb *self, int timeout);
+void irlap_stop_mbusy_timer(struct irlap_cb *);
+
+void irlmp_start_watchdog_timer(struct lsap_cb *, int timeout);
+void irlmp_start_discovery_timer(struct irlmp_cb *, int timeout);
+void irlmp_start_idle_timer(struct lap_cb *, int timeout);
+void irlmp_stop_idle_timer(struct lap_cb *self);
+
+#endif
+
diff --git a/include/net/irda/wrapper.h b/include/net/irda/wrapper.h
new file mode 100644
index 00000000..eef53ebe
--- /dev/null
+++ b/include/net/irda/wrapper.h
@@ -0,0 +1,58 @@
+/*********************************************************************
+ *                
+ * Filename:      wrapper.h
+ * Version:       1.2
+ * Description:   IrDA SIR async wrapper layer
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Mon Aug  4 20:40:53 1997
+ * Modified at:   Tue Jan 11 12:37:29 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>, 
+ *     All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsø admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef WRAPPER_H
+#define WRAPPER_H
+
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+
+#include <net/irda/irda_device.h>	/* iobuff_t */
+
+#define BOF  0xc0 /* Beginning of frame */
+#define XBOF 0xff
+#define EOF  0xc1 /* End of frame */
+#define CE   0x7d /* Control escape */
+
+#define STA BOF  /* Start flag */
+#define STO EOF  /* End flag */
+
+#define IRDA_TRANS 0x20    /* Asynchronous transparency modifier */       
+
+/* States for receiving a frame in async mode */
+enum {
+	OUTSIDE_FRAME, 
+	BEGIN_FRAME, 
+	LINK_ESCAPE, 
+	INSIDE_FRAME
+};
+
+/* Proto definitions */
+int async_wrap_skb(struct sk_buff *skb, __u8 *tx_buff, int buffsize);
+void async_unwrap_char(struct net_device *dev, struct net_device_stats *stats,
+		       iobuff_t *buf, __u8 byte);
+
+#endif
diff --git a/include/net/iucv/af_iucv.h b/include/net/iucv/af_iucv.h
new file mode 100644
index 00000000..cc7c1973
--- /dev/null
+++ b/include/net/iucv/af_iucv.h
@@ -0,0 +1,155 @@
+/*
+ * Copyright 2006 IBM Corporation
+ * IUCV protocol stack for Linux on zSeries
+ * Version 1.0
+ * Author(s): Jennifer Hunt <jenhunt@us.ibm.com>
+ *
+ */
+
+#ifndef __AFIUCV_H
+#define __AFIUCV_H
+
+#include <asm/types.h>
+#include <asm/byteorder.h>
+#include <linux/list.h>
+#include <linux/poll.h>
+#include <linux/socket.h>
+#include <net/iucv/iucv.h>
+
+#ifndef AF_IUCV
+#define AF_IUCV		32
+#define PF_IUCV		AF_IUCV
+#endif
+
+/* Connection and socket states */
+enum {
+	IUCV_CONNECTED = 1,
+	IUCV_OPEN,
+	IUCV_BOUND,
+	IUCV_LISTEN,
+	IUCV_DISCONN,
+	IUCV_CLOSING,
+	IUCV_CLOSED
+};
+
+#define IUCV_QUEUELEN_DEFAULT	65535
+#define IUCV_HIPER_MSGLIM_DEFAULT	128
+#define IUCV_CONN_TIMEOUT	(HZ * 40)
+#define IUCV_DISCONN_TIMEOUT	(HZ * 2)
+#define IUCV_CONN_IDLE_TIMEOUT	(HZ * 60)
+#define IUCV_BUFSIZE_DEFAULT	32768
+
+/* IUCV socket address */
+struct sockaddr_iucv {
+	sa_family_t	siucv_family;
+	unsigned short	siucv_port;		/* Reserved */
+	unsigned int	siucv_addr;		/* Reserved */
+	char		siucv_nodeid[8];	/* Reserved */
+	char		siucv_user_id[8];	/* Guest User Id */
+	char		siucv_name[8];		/* Application Name */
+};
+
+
+/* Common socket structures and functions */
+struct sock_msg_q {
+	struct iucv_path	*path;
+	struct iucv_message	msg;
+	struct list_head	list;
+	spinlock_t		lock;
+};
+
+#define AF_IUCV_FLAG_ACK 0x1
+#define AF_IUCV_FLAG_SYN 0x2
+#define AF_IUCV_FLAG_FIN 0x4
+#define AF_IUCV_FLAG_WIN 0x8
+#define AF_IUCV_FLAG_SHT 0x10
+
+struct af_iucv_trans_hdr {
+	u16 magic;
+	u8 version;
+	u8 flags;
+	u16 window;
+	char destNodeID[8];
+	char destUserID[8];
+	char destAppName[16];
+	char srcNodeID[8];
+	char srcUserID[8];
+	char srcAppName[16];             /* => 70 bytes */
+	struct iucv_message iucv_hdr;    /* => 33 bytes */
+	u8 pad;                          /* total 104 bytes */
+} __packed;
+
+enum iucv_tx_notify {
+	/* transmission of skb is completed and was successful */
+	TX_NOTIFY_OK = 0,
+	/* target is unreachable */
+	TX_NOTIFY_UNREACHABLE = 1,
+	/* transfer pending queue full */
+	TX_NOTIFY_TPQFULL = 2,
+	/* general error */
+	TX_NOTIFY_GENERALERROR = 3,
+	/* transmission of skb is pending - may interleave
+	 * with TX_NOTIFY_DELAYED_* */
+	TX_NOTIFY_PENDING = 4,
+	/* transmission of skb was done successfully (delayed) */
+	TX_NOTIFY_DELAYED_OK = 5,
+	/* target unreachable (detected delayed) */
+	TX_NOTIFY_DELAYED_UNREACHABLE = 6,
+	/* general error (detected delayed) */
+	TX_NOTIFY_DELAYED_GENERALERROR = 7,
+};
+
+#define iucv_sk(__sk) ((struct iucv_sock *) __sk)
+
+#define AF_IUCV_TRANS_IUCV 0
+#define AF_IUCV_TRANS_HIPER 1
+
+struct iucv_sock {
+	struct sock		sk;
+	char			src_user_id[8];
+	char			src_name[8];
+	char			dst_user_id[8];
+	char			dst_name[8];
+	struct list_head	accept_q;
+	spinlock_t		accept_q_lock;
+	struct sock		*parent;
+	struct iucv_path	*path;
+	struct net_device	*hs_dev;
+	struct sk_buff_head	send_skb_q;
+	struct sk_buff_head	backlog_skb_q;
+	struct sock_msg_q	message_q;
+	unsigned int		send_tag;
+	u8			flags;
+	u16			msglimit;
+	u16			msglimit_peer;
+	atomic_t		msg_sent;
+	atomic_t		msg_recv;
+	atomic_t		pendings;
+	int			transport;
+	void                    (*sk_txnotify)(struct sk_buff *skb,
+					       enum iucv_tx_notify n);
+};
+
+/* iucv socket options (SOL_IUCV) */
+#define SO_IPRMDATA_MSG	0x0080		/* send/recv IPRM_DATA msgs */
+#define SO_MSGLIMIT	0x1000		/* get/set IUCV MSGLIMIT */
+#define SO_MSGSIZE	0x0800		/* get maximum msgsize */
+
+/* iucv related control messages (scm) */
+#define SCM_IUCV_TRGCLS	0x0001		/* target class control message */
+
+struct iucv_sock_list {
+	struct hlist_head head;
+	rwlock_t	  lock;
+	atomic_t	  autobind_name;
+};
+
+unsigned int iucv_sock_poll(struct file *file, struct socket *sock,
+			    poll_table *wait);
+void iucv_sock_link(struct iucv_sock_list *l, struct sock *s);
+void iucv_sock_unlink(struct iucv_sock_list *l, struct sock *s);
+void iucv_accept_enqueue(struct sock *parent, struct sock *sk);
+void iucv_accept_unlink(struct sock *sk);
+struct sock *iucv_accept_dequeue(struct sock *parent, struct socket *newsock);
+
+#endif /* __IUCV_H */
diff --git a/include/net/iucv/iucv.h b/include/net/iucv/iucv.h
new file mode 100644
index 00000000..0894ced3
--- /dev/null
+++ b/include/net/iucv/iucv.h
@@ -0,0 +1,495 @@
+/*
+ *  drivers/s390/net/iucv.h
+ *    IUCV base support.
+ *
+ *  S390 version
+ *    Copyright 2000, 2006 IBM Corporation
+ *    Author(s):Alan Altmark (Alan_Altmark@us.ibm.com)
+ *		Xenia Tkatschow (xenia@us.ibm.com)
+ *    Rewritten for af_iucv:
+ *	Martin Schwidefsky <schwidefsky@de.ibm.com>
+ *
+ *
+ * Functionality:
+ * To explore any of the IUCV functions, one must first register their
+ * program using iucv_register(). Once your program has successfully
+ * completed a register, it can exploit the other functions.
+ * For furthur reference on all IUCV functionality, refer to the
+ * CP Programming Services book, also available on the web thru
+ * www.vm.ibm.com/pubs, manual # SC24-6084
+ *
+ * Definition of Return Codes
+ * - All positive return codes including zero are reflected back
+ *   from CP. The definition of each return code can be found in
+ *   CP Programming Services book.
+ * - Return Code of:
+ *   -EINVAL: Invalid value
+ *   -ENOMEM: storage allocation failed
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <asm/debug.h>
+
+/*
+ * IUCV option flags usable by device drivers:
+ *
+ * IUCV_IPRMDATA  Indicates that your program can handle a message in the
+ *		  parameter list / a message is sent in the parameter list.
+ *		  Used for iucv_path_accept, iucv_path_connect,
+ *		  iucv_message_reply, iucv_message_send, iucv_message_send2way.
+ * IUCV_IPQUSCE	  Indicates that you do not want to receive messages on this
+ *		  path until an iucv_path_resume is issued.
+ *		  Used for iucv_path_accept, iucv_path_connect.
+ * IUCV_IPBUFLST  Indicates that an address list is used for the message data.
+ *		  Used for iucv_message_receive, iucv_message_send,
+ *		  iucv_message_send2way.
+ * IUCV_IPPRTY	  Specifies that you want to send priority messages.
+ *		  Used for iucv_path_accept, iucv_path_connect,
+ *		  iucv_message_reply, iucv_message_send, iucv_message_send2way.
+ * IUCV_IPSYNC	  Indicates a synchronous send request.
+ *		  Used for iucv_message_send, iucv_message_send2way.
+ * IUCV_IPANSLST  Indicates that an address list is used for the reply data.
+ *		  Used for iucv_message_reply, iucv_message_send2way.
+ * IUCV_IPLOCAL	  Specifies that the communication partner has to be on the
+ *		  local system. If local is specified no target class can be
+ *		  specified.
+ *		  Used for iucv_path_connect.
+ *
+ * All flags are defined in the input field IPFLAGS1 of each function
+ * and can be found in CP Programming Services.
+ */
+#define IUCV_IPRMDATA	0x80
+#define IUCV_IPQUSCE	0x40
+#define IUCV_IPBUFLST	0x40
+#define IUCV_IPPRTY	0x20
+#define IUCV_IPANSLST	0x08
+#define IUCV_IPSYNC	0x04
+#define IUCV_IPLOCAL	0x01
+
+/*
+ * iucv_array : Defines buffer array.
+ * Inside the array may be 31- bit addresses and 31-bit lengths.
+ * Use a pointer to an iucv_array as the buffer, reply or answer
+ * parameter on iucv_message_send, iucv_message_send2way, iucv_message_receive
+ * and iucv_message_reply if IUCV_IPBUFLST or IUCV_IPANSLST are used.
+ */
+struct iucv_array {
+	u32 address;
+	u32 length;
+} __attribute__ ((aligned (8)));
+
+extern struct bus_type iucv_bus;
+extern struct device *iucv_root;
+
+/*
+ * struct iucv_path
+ * pathid: 16 bit path identification
+ * msglim: 16 bit message limit
+ * flags: properties of the path: IPRMDATA, IPQUSCE, IPPRTY
+ * handler:  address of iucv handler structure
+ * private: private information of the handler associated with the path
+ * list: list_head for the iucv_handler path list.
+ */
+struct iucv_path {
+	u16 pathid;
+	u16 msglim;
+	u8  flags;
+	void *private;
+	struct iucv_handler *handler;
+	struct list_head list;
+};
+
+/*
+ * struct iucv_message
+ * id: 32 bit message id
+ * audit: 32 bit error information of purged or replied messages
+ * class: 32 bit target class of a message (source class for replies)
+ * tag: 32 bit tag to be associated with the message
+ * length: 32 bit length of the message / reply
+ * reply_size: 32 bit maximum allowed length of the reply
+ * rmmsg: 8 byte inline message
+ * flags: message properties (IUCV_IPPRTY)
+ */
+struct iucv_message {
+	u32 id;
+	u32 audit;
+	u32 class;
+	u32 tag;
+	u32 length;
+	u32 reply_size;
+	u8  rmmsg[8];
+	u8  flags;
+} __packed;
+
+/*
+ * struct iucv_handler
+ *
+ * A vector of functions that handle IUCV interrupts. Each functions gets
+ * a parameter area as defined by the CP Programming Services and private
+ * pointer that is provided by the user of the interface.
+ */
+struct iucv_handler {
+	 /*
+	  * The path_pending function is called after an iucv interrupt
+	  * type 0x01 has been received. The base code allocates a path
+	  * structure and "asks" the handler if this path belongs to the
+	  * handler. To accept the path the path_pending function needs
+	  * to call iucv_path_accept and return 0. If the callback returns
+	  * a value != 0 the iucv base code will continue with the next
+	  * handler. The order in which the path_pending functions are
+	  * called is the order of the registration of the iucv handlers
+	  * to the base code.
+	  */
+	int  (*path_pending)(struct iucv_path *, u8 ipvmid[8], u8 ipuser[16]);
+	/*
+	 * The path_complete function is called after an iucv interrupt
+	 * type 0x02 has been received for a path that has been established
+	 * for this handler with iucv_path_connect and got accepted by the
+	 * peer with iucv_path_accept.
+	 */
+	void (*path_complete)(struct iucv_path *, u8 ipuser[16]);
+	 /*
+	  * The path_severed function is called after an iucv interrupt
+	  * type 0x03 has been received. The communication peer shutdown
+	  * his end of the communication path. The path still exists and
+	  * remaining messages can be received until a iucv_path_sever
+	  * shuts down the other end of the path as well.
+	  */
+	void (*path_severed)(struct iucv_path *, u8 ipuser[16]);
+	/*
+	 * The path_quiesced function is called after an icuv interrupt
+	 * type 0x04 has been received. The communication peer has quiesced
+	 * the path. Delivery of messages is stopped until iucv_path_resume
+	 * has been called.
+	 */
+	void (*path_quiesced)(struct iucv_path *, u8 ipuser[16]);
+	/*
+	 * The path_resumed function is called after an icuv interrupt
+	 * type 0x05 has been received. The communication peer has resumed
+	 * the path.
+	 */
+	void (*path_resumed)(struct iucv_path *, u8 ipuser[16]);
+	/*
+	 * The message_pending function is called after an icuv interrupt
+	 * type 0x06 or type 0x07 has been received. A new message is
+	 * available and can be received with iucv_message_receive.
+	 */
+	void (*message_pending)(struct iucv_path *, struct iucv_message *);
+	/*
+	 * The message_complete function is called after an icuv interrupt
+	 * type 0x08 or type 0x09 has been received. A message send with
+	 * iucv_message_send2way has been replied to. The reply can be
+	 * received with iucv_message_receive.
+	 */
+	void (*message_complete)(struct iucv_path *, struct iucv_message *);
+
+	struct list_head list;
+	struct list_head paths;
+};
+
+/**
+ * iucv_register:
+ * @handler: address of iucv handler structure
+ * @smp: != 0 indicates that the handler can deal with out of order messages
+ *
+ * Registers a driver with IUCV.
+ *
+ * Returns 0 on success, -ENOMEM if the memory allocation for the pathid
+ * table failed, or -EIO if IUCV_DECLARE_BUFFER failed on all cpus.
+ */
+int iucv_register(struct iucv_handler *handler, int smp);
+
+/**
+ * iucv_unregister
+ * @handler:  address of iucv handler structure
+ * @smp: != 0 indicates that the handler can deal with out of order messages
+ *
+ * Unregister driver from IUCV.
+ */
+void iucv_unregister(struct iucv_handler *handle, int smp);
+
+/**
+ * iucv_path_alloc
+ * @msglim: initial message limit
+ * @flags: initial flags
+ * @gfp: kmalloc allocation flag
+ *
+ * Allocate a new path structure for use with iucv_connect.
+ *
+ * Returns NULL if the memory allocation failed or a pointer to the
+ * path structure.
+ */
+static inline struct iucv_path *iucv_path_alloc(u16 msglim, u8 flags, gfp_t gfp)
+{
+	struct iucv_path *path;
+
+	path = kzalloc(sizeof(struct iucv_path), gfp);
+	if (path) {
+		path->msglim = msglim;
+		path->flags = flags;
+	}
+	return path;
+}
+
+/**
+ * iucv_path_free
+ * @path: address of iucv path structure
+ *
+ * Frees a path structure.
+ */
+static inline void iucv_path_free(struct iucv_path *path)
+{
+	kfree(path);
+}
+
+/**
+ * iucv_path_accept
+ * @path: address of iucv path structure
+ * @handler: address of iucv handler structure
+ * @userdata: 16 bytes of data reflected to the communication partner
+ * @private: private data passed to interrupt handlers for this path
+ *
+ * This function is issued after the user received a connection pending
+ * external interrupt and now wishes to complete the IUCV communication path.
+ *
+ * Returns the result of the CP IUCV call.
+ */
+int iucv_path_accept(struct iucv_path *path, struct iucv_handler *handler,
+		     u8 userdata[16], void *private);
+
+/**
+ * iucv_path_connect
+ * @path: address of iucv path structure
+ * @handler: address of iucv handler structure
+ * @userid: 8-byte user identification
+ * @system: 8-byte target system identification
+ * @userdata: 16 bytes of data reflected to the communication partner
+ * @private: private data passed to interrupt handlers for this path
+ *
+ * This function establishes an IUCV path. Although the connect may complete
+ * successfully, you are not able to use the path until you receive an IUCV
+ * Connection Complete external interrupt.
+ *
+ * Returns the result of the CP IUCV call.
+ */
+int iucv_path_connect(struct iucv_path *path, struct iucv_handler *handler,
+		      u8 userid[8], u8 system[8], u8 userdata[16],
+		      void *private);
+
+/**
+ * iucv_path_quiesce:
+ * @path: address of iucv path structure
+ * @userdata: 16 bytes of data reflected to the communication partner
+ *
+ * This function temporarily suspends incoming messages on an IUCV path.
+ * You can later reactivate the path by invoking the iucv_resume function.
+ *
+ * Returns the result from the CP IUCV call.
+ */
+int iucv_path_quiesce(struct iucv_path *path, u8 userdata[16]);
+
+/**
+ * iucv_path_resume:
+ * @path: address of iucv path structure
+ * @userdata: 16 bytes of data reflected to the communication partner
+ *
+ * This function resumes incoming messages on an IUCV path that has
+ * been stopped with iucv_path_quiesce.
+ *
+ * Returns the result from the CP IUCV call.
+ */
+int iucv_path_resume(struct iucv_path *path, u8 userdata[16]);
+
+/**
+ * iucv_path_sever
+ * @path: address of iucv path structure
+ * @userdata: 16 bytes of data reflected to the communication partner
+ *
+ * This function terminates an IUCV path.
+ *
+ * Returns the result from the CP IUCV call.
+ */
+int iucv_path_sever(struct iucv_path *path, u8 userdata[16]);
+
+/**
+ * iucv_message_purge
+ * @path: address of iucv path structure
+ * @msg: address of iucv msg structure
+ * @srccls: source class of message
+ *
+ * Cancels a message you have sent.
+ *
+ * Returns the result from the CP IUCV call.
+ */
+int iucv_message_purge(struct iucv_path *path, struct iucv_message *msg,
+		       u32 srccls);
+
+/**
+ * iucv_message_receive
+ * @path: address of iucv path structure
+ * @msg: address of iucv msg structure
+ * @flags: flags that affect how the message is received (IUCV_IPBUFLST)
+ * @buffer: address of data buffer or address of struct iucv_array
+ * @size: length of data buffer
+ * @residual:
+ *
+ * This function receives messages that are being sent to you over
+ * established paths. This function will deal with RMDATA messages
+ * embedded in struct iucv_message as well.
+ *
+ * Locking:	local_bh_enable/local_bh_disable
+ *
+ * Returns the result from the CP IUCV call.
+ */
+int iucv_message_receive(struct iucv_path *path, struct iucv_message *msg,
+			 u8 flags, void *buffer, size_t size, size_t *residual);
+
+/**
+ * __iucv_message_receive
+ * @path: address of iucv path structure
+ * @msg: address of iucv msg structure
+ * @flags: flags that affect how the message is received (IUCV_IPBUFLST)
+ * @buffer: address of data buffer or address of struct iucv_array
+ * @size: length of data buffer
+ * @residual:
+ *
+ * This function receives messages that are being sent to you over
+ * established paths. This function will deal with RMDATA messages
+ * embedded in struct iucv_message as well.
+ *
+ * Locking:	no locking.
+ *
+ * Returns the result from the CP IUCV call.
+ */
+int __iucv_message_receive(struct iucv_path *path, struct iucv_message *msg,
+			   u8 flags, void *buffer, size_t size,
+			   size_t *residual);
+
+/**
+ * iucv_message_reject
+ * @path: address of iucv path structure
+ * @msg: address of iucv msg structure
+ *
+ * The reject function refuses a specified message. Between the time you
+ * are notified of a message and the time that you complete the message,
+ * the message may be rejected.
+ *
+ * Returns the result from the CP IUCV call.
+ */
+int iucv_message_reject(struct iucv_path *path, struct iucv_message *msg);
+
+/**
+ * iucv_message_reply
+ * @path: address of iucv path structure
+ * @msg: address of iucv msg structure
+ * @flags: how the reply is sent (IUCV_IPRMDATA, IUCV_IPPRTY, IUCV_IPBUFLST)
+ * @reply: address of data buffer or address of struct iucv_array
+ * @size: length of reply data buffer
+ *
+ * This function responds to the two-way messages that you receive. You
+ * must identify completely the message to which you wish to reply. ie,
+ * pathid, msgid, and trgcls. Prmmsg signifies the data is moved into
+ * the parameter list.
+ *
+ * Returns the result from the CP IUCV call.
+ */
+int iucv_message_reply(struct iucv_path *path, struct iucv_message *msg,
+		       u8 flags, void *reply, size_t size);
+
+/**
+ * iucv_message_send
+ * @path: address of iucv path structure
+ * @msg: address of iucv msg structure
+ * @flags: how the message is sent (IUCV_IPRMDATA, IUCV_IPPRTY, IUCV_IPBUFLST)
+ * @srccls: source class of message
+ * @buffer: address of data buffer or address of struct iucv_array
+ * @size: length of send buffer
+ *
+ * This function transmits data to another application. Data to be
+ * transmitted is in a buffer and this is a one-way message and the
+ * receiver will not reply to the message.
+ *
+ * Locking:	local_bh_enable/local_bh_disable
+ *
+ * Returns the result from the CP IUCV call.
+ */
+int iucv_message_send(struct iucv_path *path, struct iucv_message *msg,
+		      u8 flags, u32 srccls, void *buffer, size_t size);
+
+/**
+ * __iucv_message_send
+ * @path: address of iucv path structure
+ * @msg: address of iucv msg structure
+ * @flags: how the message is sent (IUCV_IPRMDATA, IUCV_IPPRTY, IUCV_IPBUFLST)
+ * @srccls: source class of message
+ * @buffer: address of data buffer or address of struct iucv_array
+ * @size: length of send buffer
+ *
+ * This function transmits data to another application. Data to be
+ * transmitted is in a buffer and this is a one-way message and the
+ * receiver will not reply to the message.
+ *
+ * Locking:	no locking.
+ *
+ * Returns the result from the CP IUCV call.
+ */
+int __iucv_message_send(struct iucv_path *path, struct iucv_message *msg,
+			u8 flags, u32 srccls, void *buffer, size_t size);
+
+/**
+ * iucv_message_send2way
+ * @path: address of iucv path structure
+ * @msg: address of iucv msg structure
+ * @flags: how the message is sent and the reply is received
+ *	   (IUCV_IPRMDATA, IUCV_IPBUFLST, IUCV_IPPRTY, IUCV_ANSLST)
+ * @srccls: source class of message
+ * @buffer: address of data buffer or address of struct iucv_array
+ * @size: length of send buffer
+ * @ansbuf: address of answer buffer or address of struct iucv_array
+ * @asize: size of reply buffer
+ *
+ * This function transmits data to another application. Data to be
+ * transmitted is in a buffer. The receiver of the send is expected to
+ * reply to the message and a buffer is provided into which IUCV moves
+ * the reply to this message.
+ *
+ * Returns the result from the CP IUCV call.
+ */
+int iucv_message_send2way(struct iucv_path *path, struct iucv_message *msg,
+			  u8 flags, u32 srccls, void *buffer, size_t size,
+			  void *answer, size_t asize, size_t *residual);
+
+struct iucv_interface {
+	int (*message_receive)(struct iucv_path *path, struct iucv_message *msg,
+		u8 flags, void *buffer, size_t size, size_t *residual);
+	int (*__message_receive)(struct iucv_path *path,
+		struct iucv_message *msg, u8 flags, void *buffer, size_t size,
+		size_t *residual);
+	int (*message_reply)(struct iucv_path *path, struct iucv_message *msg,
+		u8 flags, void *reply, size_t size);
+	int (*message_reject)(struct iucv_path *path, struct iucv_message *msg);
+	int (*message_send)(struct iucv_path *path, struct iucv_message *msg,
+		u8 flags, u32 srccls, void *buffer, size_t size);
+	int (*__message_send)(struct iucv_path *path, struct iucv_message *msg,
+		u8 flags, u32 srccls, void *buffer, size_t size);
+	int (*message_send2way)(struct iucv_path *path,
+		struct iucv_message *msg, u8 flags, u32 srccls, void *buffer,
+		size_t size, void *answer, size_t asize, size_t *residual);
+	int (*message_purge)(struct iucv_path *path, struct iucv_message *msg,
+		u32 srccls);
+	int (*path_accept)(struct iucv_path *path, struct iucv_handler *handler,
+		u8 userdata[16], void *private);
+	int (*path_connect)(struct iucv_path *path,
+		struct iucv_handler *handler,
+		u8 userid[8], u8 system[8], u8 userdata[16], void *private);
+	int (*path_quiesce)(struct iucv_path *path, u8 userdata[16]);
+	int (*path_resume)(struct iucv_path *path, u8 userdata[16]);
+	int (*path_sever)(struct iucv_path *path, u8 userdata[16]);
+	int (*iucv_register)(struct iucv_handler *handler, int smp);
+	void (*iucv_unregister)(struct iucv_handler *handler, int smp);
+	struct bus_type *bus;
+	struct device *root;
+};
+
+extern struct iucv_interface iucv_if;
diff --git a/include/net/iw_handler.h b/include/net/iw_handler.h
new file mode 100644
index 00000000..5d5a6a47
--- /dev/null
+++ b/include/net/iw_handler.h
@@ -0,0 +1,587 @@
+/*
+ * This file define the new driver API for Wireless Extensions
+ *
+ * Version :	8	16.3.07
+ *
+ * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
+ * Copyright (c) 2001-2007 Jean Tourrilhes, All Rights Reserved.
+ */
+
+#ifndef _IW_HANDLER_H
+#define _IW_HANDLER_H
+
+/************************** DOCUMENTATION **************************/
+/*
+ * Initial driver API (1996 -> onward) :
+ * -----------------------------------
+ * The initial API just sends the IOCTL request received from user space
+ * to the driver (via the driver ioctl handler). The driver has to
+ * handle all the rest...
+ *
+ * The initial API also defines a specific handler in struct net_device
+ * to handle wireless statistics.
+ *
+ * The initial APIs served us well and has proven a reasonably good design.
+ * However, there is a few shortcommings :
+ *	o No events, everything is a request to the driver.
+ *	o Large ioctl function in driver with gigantic switch statement
+ *	  (i.e. spaghetti code).
+ *	o Driver has to mess up with copy_to/from_user, and in many cases
+ *	  does it unproperly. Common mistakes are :
+ *		* buffer overflows (no checks or off by one checks)
+ *		* call copy_to/from_user with irq disabled
+ *	o The user space interface is tied to ioctl because of the use
+ *	  copy_to/from_user.
+ *
+ * New driver API (2002 -> onward) :
+ * -------------------------------
+ * The new driver API is just a bunch of standard functions (handlers),
+ * each handling a specific Wireless Extension. The driver just export
+ * the list of handler it supports, and those will be called apropriately.
+ *
+ * I tried to keep the main advantage of the previous API (simplicity,
+ * efficiency and light weight), and also I provide a good dose of backward
+ * compatibility (most structures are the same, driver can use both API
+ * simultaneously, ...).
+ * Hopefully, I've also addressed the shortcomming of the initial API.
+ *
+ * The advantage of the new API are :
+ *	o Handling of Extensions in driver broken in small contained functions
+ *	o Tighter checks of ioctl before calling the driver
+ *	o Flexible commit strategy (at least, the start of it)
+ *	o Backward compatibility (can be mixed with old API)
+ *	o Driver doesn't have to worry about memory and user-space issues
+ * The last point is important for the following reasons :
+ *	o You are now able to call the new driver API from any API you
+ *		want (including from within other parts of the kernel).
+ *	o Common mistakes are avoided (buffer overflow, user space copy
+ *		with irq disabled and so on).
+ *
+ * The Drawback of the new API are :
+ *	o bloat (especially kernel)
+ *	o need to migrate existing drivers to new API
+ * My initial testing shows that the new API adds around 3kB to the kernel
+ * and save between 0 and 5kB from a typical driver.
+ * Also, as all structures and data types are unchanged, the migration is
+ * quite straightforward (but tedious).
+ *
+ * ---
+ *
+ * The new driver API is defined below in this file. User space should
+ * not be aware of what's happening down there...
+ *
+ * A new kernel wrapper is in charge of validating the IOCTLs and calling
+ * the appropriate driver handler. This is implemented in :
+ *	# net/core/wireless.c
+ *
+ * The driver export the list of handlers in :
+ *	# include/linux/netdevice.h (one place)
+ *
+ * The new driver API is available for WIRELESS_EXT >= 13.
+ * Good luck with migration to the new API ;-)
+ */
+
+/* ---------------------- THE IMPLEMENTATION ---------------------- */
+/*
+ * Some of the choice I've made are pretty controversials. Defining an
+ * API is very much weighting compromises. This goes into some of the
+ * details and the thinking behind the implementation.
+ *
+ * Implementation goals :
+ * --------------------
+ * The implementation goals were as follow :
+ *	o Obvious : you should not need a PhD to understand what's happening,
+ *		the benefit is easier maintenance.
+ *	o Flexible : it should accommodate a wide variety of driver
+ *		implementations and be as flexible as the old API.
+ *	o Lean : it should be efficient memory wise to minimise the impact
+ *		on kernel footprint.
+ *	o Transparent to user space : the large number of user space
+ *		applications that use Wireless Extensions should not need
+ *		any modifications.
+ *
+ * Array of functions versus Struct of functions
+ * ---------------------------------------------
+ * 1) Having an array of functions allow the kernel code to access the
+ * handler in a single lookup, which is much more efficient (think hash
+ * table here).
+ * 2) The only drawback is that driver writer may put their handler in
+ * the wrong slot. This is trivial to test (I set the frequency, the
+ * bitrate changes). Once the handler is in the proper slot, it will be
+ * there forever, because the array is only extended at the end.
+ * 3) Backward/forward compatibility : adding new handler just require
+ * extending the array, so you can put newer driver in older kernel
+ * without having to patch the kernel code (and vice versa).
+ *
+ * All handler are of the same generic type
+ * ----------------------------------------
+ * That's a feature !!!
+ * 1) Having a generic handler allow to have generic code, which is more
+ * efficient. If each of the handler was individually typed I would need
+ * to add a big switch in the kernel (== more bloat). This solution is
+ * more scalable, adding new Wireless Extensions doesn't add new code.
+ * 2) You can use the same handler in different slots of the array. For
+ * hardware, it may be more efficient or logical to handle multiple
+ * Wireless Extensions with a single function, and the API allow you to
+ * do that. (An example would be a single record on the card to control
+ * both bitrate and frequency, the handler would read the old record,
+ * modify it according to info->cmd and rewrite it).
+ *
+ * Functions prototype uses union iwreq_data
+ * -----------------------------------------
+ * Some would have preferred functions defined this way :
+ *	static int mydriver_ioctl_setrate(struct net_device *dev, 
+ *					  long rate, int auto)
+ * 1) The kernel code doesn't "validate" the content of iwreq_data, and
+ * can't do it (different hardware may have different notion of what a
+ * valid frequency is), so we don't pretend that we do it.
+ * 2) The above form is not extendable. If I want to add a flag (for
+ * example to distinguish setting max rate and basic rate), I would
+ * break the prototype. Using iwreq_data is more flexible.
+ * 3) Also, the above form is not generic (see above).
+ * 4) I don't expect driver developper using the wrong field of the
+ * union (Doh !), so static typechecking doesn't add much value.
+ * 5) Lastly, you can skip the union by doing :
+ *	static int mydriver_ioctl_setrate(struct net_device *dev,
+ *					  struct iw_request_info *info,
+ *					  struct iw_param *rrq,
+ *					  char *extra)
+ * And then adding the handler in the array like this :
+ *        (iw_handler) mydriver_ioctl_setrate,             // SIOCSIWRATE
+ *
+ * Using functions and not a registry
+ * ----------------------------------
+ * Another implementation option would have been for every instance to
+ * define a registry (a struct containing all the Wireless Extensions)
+ * and only have a function to commit the registry to the hardware.
+ * 1) This approach can be emulated by the current code, but not
+ * vice versa.
+ * 2) Some drivers don't keep any configuration in the driver, for them
+ * adding such a registry would be a significant bloat.
+ * 3) The code to translate from Wireless Extension to native format is
+ * needed anyway, so it would not reduce significantely the amount of code.
+ * 4) The current approach only selectively translate Wireless Extensions
+ * to native format and only selectively set, whereas the registry approach
+ * would require to translate all WE and set all parameters for any single
+ * change.
+ * 5) For many Wireless Extensions, the GET operation return the current
+ * dynamic value, not the value that was set.
+ *
+ * This header is <net/iw_handler.h>
+ * ---------------------------------
+ * 1) This header is kernel space only and should not be exported to
+ * user space. Headers in "include/linux/" are exported, headers in
+ * "include/net/" are not.
+ *
+ * Mixed 32/64 bit issues
+ * ----------------------
+ * The Wireless Extensions are designed to be 64 bit clean, by using only
+ * datatypes with explicit storage size.
+ * There are some issues related to kernel and user space using different
+ * memory model, and in particular 64bit kernel with 32bit user space.
+ * The problem is related to struct iw_point, that contains a pointer
+ * that *may* need to be translated.
+ * This is quite messy. The new API doesn't solve this problem (it can't),
+ * but is a step in the right direction :
+ * 1) Meta data about each ioctl is easily available, so we know what type
+ * of translation is needed.
+ * 2) The move of data between kernel and user space is only done in a single
+ * place in the kernel, so adding specific hooks in there is possible.
+ * 3) In the long term, it allows to move away from using ioctl as the
+ * user space API.
+ *
+ * So many comments and so few code
+ * --------------------------------
+ * That's a feature. Comments won't bloat the resulting kernel binary.
+ */
+
+/***************************** INCLUDES *****************************/
+
+#include <linux/wireless.h>		/* IOCTL user space API */
+#include <linux/if_ether.h>
+
+/***************************** VERSION *****************************/
+/*
+ * This constant is used to know which version of the driver API is
+ * available. Hopefully, this will be pretty stable and no changes
+ * will be needed...
+ * I just plan to increment with each new version.
+ */
+#define IW_HANDLER_VERSION	8
+
+/*
+ * Changes :
+ *
+ * V2 to V3
+ * --------
+ *	- Move event definition in <linux/wireless.h>
+ *	- Add Wireless Event support :
+ *		o wireless_send_event() prototype
+ *		o iwe_stream_add_event/point() inline functions
+ * V3 to V4
+ * --------
+ *	- Reshuffle IW_HEADER_TYPE_XXX to map IW_PRIV_TYPE_XXX changes
+ *
+ * V4 to V5
+ * --------
+ *	- Add new spy support : struct iw_spy_data & prototypes
+ *
+ * V5 to V6
+ * --------
+ *	- Change the way we get to spy_data method for added safety
+ *	- Remove spy #ifdef, they are always on -> cleaner code
+ *	- Add IW_DESCR_FLAG_NOMAX flag for very large requests
+ *	- Start migrating get_wireless_stats to struct iw_handler_def
+ *
+ * V6 to V7
+ * --------
+ *	- Add struct ieee80211_device pointer in struct iw_public_data
+ *	- Remove (struct iw_point *)->pointer from events and streams
+ *	- Remove spy_offset from struct iw_handler_def
+ *	- Add "check" version of event macros for ieee802.11 stack
+ *
+ * V7 to V8
+ * ----------
+ *	- Prevent leaking of kernel space in stream on 64 bits.
+ */
+
+/**************************** CONSTANTS ****************************/
+
+/* Enhanced spy support available */
+#define IW_WIRELESS_SPY
+#define IW_WIRELESS_THRSPY
+
+/* Special error message for the driver to indicate that we
+ * should do a commit after return from the iw_handler */
+#define EIWCOMMIT	EINPROGRESS
+
+/* Flags available in struct iw_request_info */
+#define IW_REQUEST_FLAG_COMPAT	0x0001	/* Compat ioctl call */
+
+/* Type of headers we know about (basically union iwreq_data) */
+#define IW_HEADER_TYPE_NULL	0	/* Not available */
+#define IW_HEADER_TYPE_CHAR	2	/* char [IFNAMSIZ] */
+#define IW_HEADER_TYPE_UINT	4	/* __u32 */
+#define IW_HEADER_TYPE_FREQ	5	/* struct iw_freq */
+#define IW_HEADER_TYPE_ADDR	6	/* struct sockaddr */
+#define IW_HEADER_TYPE_POINT	8	/* struct iw_point */
+#define IW_HEADER_TYPE_PARAM	9	/* struct iw_param */
+#define IW_HEADER_TYPE_QUAL	10	/* struct iw_quality */
+
+/* Handling flags */
+/* Most are not implemented. I just use them as a reminder of some
+ * cool features we might need one day ;-) */
+#define IW_DESCR_FLAG_NONE	0x0000	/* Obvious */
+/* Wrapper level flags */
+#define IW_DESCR_FLAG_DUMP	0x0001	/* Not part of the dump command */
+#define IW_DESCR_FLAG_EVENT	0x0002	/* Generate an event on SET */
+#define IW_DESCR_FLAG_RESTRICT	0x0004	/* GET : request is ROOT only */
+				/* SET : Omit payload from generated iwevent */
+#define IW_DESCR_FLAG_NOMAX	0x0008	/* GET : no limit on request size */
+/* Driver level flags */
+#define IW_DESCR_FLAG_WAIT	0x0100	/* Wait for driver event */
+
+/****************************** TYPES ******************************/
+
+/* ----------------------- WIRELESS HANDLER ----------------------- */
+/*
+ * A wireless handler is just a standard function, that looks like the
+ * ioctl handler.
+ * We also define there how a handler list look like... As the Wireless
+ * Extension space is quite dense, we use a simple array, which is faster
+ * (that's the perfect hash table ;-).
+ */
+
+/*
+ * Meta data about the request passed to the iw_handler.
+ * Most handlers can safely ignore what's in there.
+ * The 'cmd' field might come handy if you want to use the same handler
+ * for multiple command...
+ * This struct is also my long term insurance. I can add new fields here
+ * without breaking the prototype of iw_handler...
+ */
+struct iw_request_info {
+	__u16		cmd;		/* Wireless Extension command */
+	__u16		flags;		/* More to come ;-) */
+};
+
+struct net_device;
+
+/*
+ * This is how a function handling a Wireless Extension should look
+ * like (both get and set, standard and private).
+ */
+typedef int (*iw_handler)(struct net_device *dev, struct iw_request_info *info,
+			  union iwreq_data *wrqu, char *extra);
+
+/*
+ * This define all the handler that the driver export.
+ * As you need only one per driver type, please use a static const
+ * shared by all driver instances... Same for the members...
+ * This will be linked from net_device in <linux/netdevice.h>
+ */
+struct iw_handler_def {
+
+	/* Array of handlers for standard ioctls
+	 * We will call dev->wireless_handlers->standard[ioctl - SIOCIWFIRST]
+	 */
+	const iw_handler *	standard;
+	/* Number of handlers defined (more precisely, index of the
+	 * last defined handler + 1) */
+	__u16			num_standard;
+
+#ifdef CONFIG_WEXT_PRIV
+	__u16			num_private;
+	/* Number of private arg description */
+	__u16			num_private_args;
+	/* Array of handlers for private ioctls
+	 * Will call dev->wireless_handlers->private[ioctl - SIOCIWFIRSTPRIV]
+	 */
+	const iw_handler *	private;
+
+	/* Arguments of private handler. This one is just a list, so you
+	 * can put it in any order you want and should not leave holes...
+	 * We will automatically export that to user space... */
+	const struct iw_priv_args *	private_args;
+#endif
+
+	/* New location of get_wireless_stats, to de-bloat struct net_device.
+	 * The old pointer in struct net_device will be gradually phased
+	 * out, and drivers are encouraged to use this one... */
+	struct iw_statistics*	(*get_wireless_stats)(struct net_device *dev);
+};
+
+/* ---------------------- IOCTL DESCRIPTION ---------------------- */
+/*
+ * One of the main goal of the new interface is to deal entirely with
+ * user space/kernel space memory move.
+ * For that, we need to know :
+ *	o if iwreq is a pointer or contain the full data
+ *	o what is the size of the data to copy
+ *
+ * For private IOCTLs, we use the same rules as used by iwpriv and
+ * defined in struct iw_priv_args.
+ *
+ * For standard IOCTLs, things are quite different and we need to
+ * use the stuctures below. Actually, this struct is also more
+ * efficient, but that's another story...
+ */
+
+/*
+ * Describe how a standard IOCTL looks like.
+ */
+struct iw_ioctl_description {
+	__u8	header_type;		/* NULL, iw_point or other */
+	__u8	token_type;		/* Future */
+	__u16	token_size;		/* Granularity of payload */
+	__u16	min_tokens;		/* Min acceptable token number */
+	__u16	max_tokens;		/* Max acceptable token number */
+	__u32	flags;			/* Special handling of the request */
+};
+
+/* Need to think of short header translation table. Later. */
+
+/* --------------------- ENHANCED SPY SUPPORT --------------------- */
+/*
+ * In the old days, the driver was handling spy support all by itself.
+ * Now, the driver can delegate this task to Wireless Extensions.
+ * It needs to include this struct in its private part and use the
+ * standard spy iw_handler.
+ */
+
+/*
+ * Instance specific spy data, i.e. addresses spied and quality for them.
+ */
+struct iw_spy_data {
+	/* --- Standard spy support --- */
+	int			spy_number;
+	u_char			spy_address[IW_MAX_SPY][ETH_ALEN];
+	struct iw_quality	spy_stat[IW_MAX_SPY];
+	/* --- Enhanced spy support (event) */
+	struct iw_quality	spy_thr_low;	/* Low threshold */
+	struct iw_quality	spy_thr_high;	/* High threshold */
+	u_char			spy_thr_under[IW_MAX_SPY];
+};
+
+/* --------------------- DEVICE WIRELESS DATA --------------------- */
+/*
+ * This is all the wireless data specific to a device instance that
+ * is managed by the core of Wireless Extensions or the 802.11 layer.
+ * We only keep pointer to those structures, so that a driver is free
+ * to share them between instances.
+ * This structure should be initialised before registering the device.
+ * Access to this data follow the same rules as any other struct net_device
+ * data (i.e. valid as long as struct net_device exist, same locking rules).
+ */
+/* Forward declaration */
+struct libipw_device;
+/* The struct */
+struct iw_public_data {
+	/* Driver enhanced spy support */
+	struct iw_spy_data *		spy_data;
+	/* Legacy structure managed by the ipw2x00-specific IEEE 802.11 layer */
+	struct libipw_device *		libipw;
+};
+
+/**************************** PROTOTYPES ****************************/
+/*
+ * Functions part of the Wireless Extensions (defined in net/core/wireless.c).
+ * Those may be called only within the kernel.
+ */
+
+/* First : function strictly used inside the kernel */
+
+/* Handle /proc/net/wireless, called in net/code/dev.c */
+extern int dev_get_wireless_info(char * buffer, char **start, off_t offset,
+				 int length);
+
+/* Second : functions that may be called by driver modules */
+
+/* Send a single event to user space */
+extern void wireless_send_event(struct net_device *	dev,
+				unsigned int		cmd,
+				union iwreq_data *	wrqu,
+				const char *		extra);
+
+/* We may need a function to send a stream of events to user space.
+ * More on that later... */
+
+/* Standard handler for SIOCSIWSPY */
+extern int iw_handler_set_spy(struct net_device *	dev,
+			      struct iw_request_info *	info,
+			      union iwreq_data *	wrqu,
+			      char *			extra);
+/* Standard handler for SIOCGIWSPY */
+extern int iw_handler_get_spy(struct net_device *	dev,
+			      struct iw_request_info *	info,
+			      union iwreq_data *	wrqu,
+			      char *			extra);
+/* Standard handler for SIOCSIWTHRSPY */
+extern int iw_handler_set_thrspy(struct net_device *	dev,
+				 struct iw_request_info *info,
+				 union iwreq_data *	wrqu,
+				 char *			extra);
+/* Standard handler for SIOCGIWTHRSPY */
+extern int iw_handler_get_thrspy(struct net_device *	dev,
+				 struct iw_request_info *info,
+				 union iwreq_data *	wrqu,
+				 char *			extra);
+/* Driver call to update spy records */
+extern void wireless_spy_update(struct net_device *	dev,
+				unsigned char *		address,
+				struct iw_quality *	wstats);
+
+/************************* INLINE FUNTIONS *************************/
+/*
+ * Function that are so simple that it's more efficient inlining them
+ */
+
+static inline int iwe_stream_lcp_len(struct iw_request_info *info)
+{
+#ifdef CONFIG_COMPAT
+	if (info->flags & IW_REQUEST_FLAG_COMPAT)
+		return IW_EV_COMPAT_LCP_LEN;
+#endif
+	return IW_EV_LCP_LEN;
+}
+
+static inline int iwe_stream_point_len(struct iw_request_info *info)
+{
+#ifdef CONFIG_COMPAT
+	if (info->flags & IW_REQUEST_FLAG_COMPAT)
+		return IW_EV_COMPAT_POINT_LEN;
+#endif
+	return IW_EV_POINT_LEN;
+}
+
+static inline int iwe_stream_event_len_adjust(struct iw_request_info *info,
+					      int event_len)
+{
+#ifdef CONFIG_COMPAT
+	if (info->flags & IW_REQUEST_FLAG_COMPAT) {
+		event_len -= IW_EV_LCP_LEN;
+		event_len += IW_EV_COMPAT_LCP_LEN;
+	}
+#endif
+
+	return event_len;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wrapper to add an Wireless Event to a stream of events.
+ */
+static inline char *
+iwe_stream_add_event(struct iw_request_info *info, char *stream, char *ends,
+		     struct iw_event *iwe, int event_len)
+{
+	int lcp_len = iwe_stream_lcp_len(info);
+
+	event_len = iwe_stream_event_len_adjust(info, event_len);
+
+	/* Check if it's possible */
+	if(likely((stream + event_len) < ends)) {
+		iwe->len = event_len;
+		/* Beware of alignement issues on 64 bits */
+		memcpy(stream, (char *) iwe, IW_EV_LCP_PK_LEN);
+		memcpy(stream + lcp_len, &iwe->u,
+		       event_len - lcp_len);
+		stream += event_len;
+	}
+	return stream;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wrapper to add an short Wireless Event containing a pointer to a
+ * stream of events.
+ */
+static inline char *
+iwe_stream_add_point(struct iw_request_info *info, char *stream, char *ends,
+		     struct iw_event *iwe, char *extra)
+{
+	int event_len = iwe_stream_point_len(info) + iwe->u.data.length;
+	int point_len = iwe_stream_point_len(info);
+	int lcp_len   = iwe_stream_lcp_len(info);
+
+	/* Check if it's possible */
+	if(likely((stream + event_len) < ends)) {
+		iwe->len = event_len;
+		memcpy(stream, (char *) iwe, IW_EV_LCP_PK_LEN);
+		memcpy(stream + lcp_len,
+		       ((char *) &iwe->u) + IW_EV_POINT_OFF,
+		       IW_EV_POINT_PK_LEN - IW_EV_LCP_PK_LEN);
+		memcpy(stream + point_len, extra, iwe->u.data.length);
+		stream += event_len;
+	}
+	return stream;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wrapper to add a value to a Wireless Event in a stream of events.
+ * Be careful, this one is tricky to use properly :
+ * At the first run, you need to have (value = event + IW_EV_LCP_LEN).
+ */
+static inline char *
+iwe_stream_add_value(struct iw_request_info *info, char *event, char *value,
+		     char *ends, struct iw_event *iwe, int event_len)
+{
+	int lcp_len = iwe_stream_lcp_len(info);
+
+	/* Don't duplicate LCP */
+	event_len -= IW_EV_LCP_LEN;
+
+	/* Check if it's possible */
+	if(likely((value + event_len) < ends)) {
+		/* Add new value */
+		memcpy(value, &iwe->u, event_len);
+		value += event_len;
+		/* Patch LCP */
+		iwe->len = value - event;
+		memcpy(event, (char *) iwe, lcp_len);
+	}
+	return value;
+}
+
+#endif	/* _IW_HANDLER_H */
diff --git a/include/net/lapb.h b/include/net/lapb.h
new file mode 100644
index 00000000..fd2bf572
--- /dev/null
+++ b/include/net/lapb.h
@@ -0,0 +1,152 @@
+#ifndef _LAPB_H
+#define _LAPB_H 
+#include <linux/lapb.h>
+
+#define	LAPB_HEADER_LEN	20		/* LAPB over Ethernet + a bit more */
+
+#define	LAPB_ACK_PENDING_CONDITION	0x01
+#define	LAPB_REJECT_CONDITION		0x02
+#define	LAPB_PEER_RX_BUSY_CONDITION	0x04
+
+/* Control field templates */
+#define	LAPB_I		0x00	/* Information frames */
+#define	LAPB_S		0x01	/* Supervisory frames */
+#define	LAPB_U		0x03	/* Unnumbered frames */
+
+#define	LAPB_RR		0x01	/* Receiver ready */
+#define	LAPB_RNR	0x05	/* Receiver not ready */
+#define	LAPB_REJ	0x09	/* Reject */
+
+#define	LAPB_SABM	0x2F	/* Set Asynchronous Balanced Mode */
+#define	LAPB_SABME	0x6F	/* Set Asynchronous Balanced Mode Extended */
+#define	LAPB_DISC	0x43	/* Disconnect */
+#define	LAPB_DM		0x0F	/* Disconnected mode */
+#define	LAPB_UA		0x63	/* Unnumbered acknowledge */
+#define	LAPB_FRMR	0x87	/* Frame reject */
+
+#define LAPB_ILLEGAL	0x100	/* Impossible to be a real frame type */
+
+#define	LAPB_SPF	0x10	/* Poll/final bit for standard LAPB */
+#define	LAPB_EPF	0x01	/* Poll/final bit for extended LAPB */
+
+#define	LAPB_FRMR_W	0x01	/* Control field invalid	*/
+#define	LAPB_FRMR_X	0x02	/* I field invalid		*/
+#define	LAPB_FRMR_Y	0x04	/* I field too long		*/
+#define	LAPB_FRMR_Z	0x08	/* Invalid N(R)			*/
+
+#define	LAPB_POLLOFF	0
+#define	LAPB_POLLON	1
+
+/* LAPB C-bit */
+#define LAPB_COMMAND	1
+#define LAPB_RESPONSE	2
+
+#define	LAPB_ADDR_A	0x03
+#define	LAPB_ADDR_B	0x01
+#define	LAPB_ADDR_C	0x0F
+#define	LAPB_ADDR_D	0x07
+
+/* Define Link State constants. */
+enum {
+	LAPB_STATE_0,	/* Disconnected State		*/
+	LAPB_STATE_1,	/* Awaiting Connection State	*/
+	LAPB_STATE_2,	/* Awaiting Disconnection State	*/
+	LAPB_STATE_3,	/* Data Transfer State		*/
+	LAPB_STATE_4	/* Frame Reject State		*/
+};
+
+#define	LAPB_DEFAULT_MODE		(LAPB_STANDARD | LAPB_SLP | LAPB_DTE)
+#define	LAPB_DEFAULT_WINDOW		7		/* Window=7 */
+#define	LAPB_DEFAULT_T1			(5 * HZ)	/* T1=5s    */
+#define	LAPB_DEFAULT_T2			(1 * HZ)	/* T2=1s    */
+#define	LAPB_DEFAULT_N2			20		/* N2=20    */
+
+#define	LAPB_SMODULUS	8
+#define	LAPB_EMODULUS	128
+
+/*
+ *	Information about the current frame.
+ */
+struct lapb_frame {
+	unsigned short		type;		/* Parsed type		*/
+	unsigned short		nr, ns;		/* N(R), N(S)		*/
+	unsigned char		cr;		/* Command/Response	*/
+	unsigned char		pf;		/* Poll/Final		*/
+	unsigned char		control[2];	/* Original control data*/
+};
+
+/*
+ *	The per LAPB connection control structure.
+ */
+struct lapb_cb {
+	struct list_head	node;
+	struct net_device	*dev;
+
+	/* Link status fields */
+	unsigned int		mode;
+	unsigned char		state;
+	unsigned short		vs, vr, va;
+	unsigned char		condition;
+	unsigned short		n2, n2count;
+	unsigned short		t1, t2;
+	struct timer_list	t1timer, t2timer;
+
+	/* Internal control information */
+	struct sk_buff_head	write_queue;
+	struct sk_buff_head	ack_queue;
+	unsigned char		window;
+	const struct lapb_register_struct *callbacks;
+
+	/* FRMR control information */
+	struct lapb_frame	frmr_data;
+	unsigned char		frmr_type;
+
+	atomic_t		refcnt;
+};
+
+/* lapb_iface.c */
+extern void lapb_connect_confirmation(struct lapb_cb *lapb, int);
+extern void lapb_connect_indication(struct lapb_cb *lapb, int);
+extern void lapb_disconnect_confirmation(struct lapb_cb *lapb, int);
+extern void lapb_disconnect_indication(struct lapb_cb *lapb, int);
+extern int  lapb_data_indication(struct lapb_cb *lapb, struct sk_buff *);
+extern int  lapb_data_transmit(struct lapb_cb *lapb, struct sk_buff *);
+
+/* lapb_in.c */
+extern void lapb_data_input(struct lapb_cb *lapb, struct sk_buff *);
+
+/* lapb_out.c */
+extern void lapb_kick(struct lapb_cb *lapb);
+extern void lapb_transmit_buffer(struct lapb_cb *lapb, struct sk_buff *, int);
+extern void lapb_establish_data_link(struct lapb_cb *lapb);
+extern void lapb_enquiry_response(struct lapb_cb *lapb);
+extern void lapb_timeout_response(struct lapb_cb *lapb);
+extern void lapb_check_iframes_acked(struct lapb_cb *lapb, unsigned short);
+extern void lapb_check_need_response(struct lapb_cb *lapb, int, int);
+
+/* lapb_subr.c */
+extern void lapb_clear_queues(struct lapb_cb *lapb);
+extern void lapb_frames_acked(struct lapb_cb *lapb, unsigned short);
+extern void lapb_requeue_frames(struct lapb_cb *lapb);
+extern int  lapb_validate_nr(struct lapb_cb *lapb, unsigned short);
+extern int lapb_decode(struct lapb_cb *lapb, struct sk_buff *, struct lapb_frame *);
+extern void lapb_send_control(struct lapb_cb *lapb, int, int, int);
+extern void lapb_transmit_frmr(struct lapb_cb *lapb);
+
+/* lapb_timer.c */
+extern void lapb_start_t1timer(struct lapb_cb *lapb);
+extern void lapb_start_t2timer(struct lapb_cb *lapb);
+extern void lapb_stop_t1timer(struct lapb_cb *lapb);
+extern void lapb_stop_t2timer(struct lapb_cb *lapb);
+extern int  lapb_t1timer_running(struct lapb_cb *lapb);
+
+/*
+ * Debug levels.
+ *	0 = Off
+ *	1 = State Changes
+ *	2 = Packets I/O and State Changes
+ *	3 = Hex dumps, Packets I/O and State Changes.
+ */
+#define	LAPB_DEBUG	0
+
+#endif
diff --git a/include/net/lib80211.h b/include/net/lib80211.h
new file mode 100644
index 00000000..d178c26a
--- /dev/null
+++ b/include/net/lib80211.h
@@ -0,0 +1,124 @@
+/*
+ * lib80211.h -- common bits for IEEE802.11 wireless drivers
+ *
+ * Copyright (c) 2008, John W. Linville <linville@tuxdriver.com>
+ *
+ * Some bits copied from old ieee80211 component, w/ original copyright
+ * notices below:
+ *
+ * Original code based on Host AP (software wireless LAN access point) driver
+ * for Intersil Prism2/2.5/3.
+ *
+ * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+ * <j@w1.fi>
+ * Copyright (c) 2002-2003, Jouni Malinen <j@w1.fi>
+ *
+ * Adaption to a generic IEEE 802.11 stack by James Ketrenos
+ * <jketreno@linux.intel.com>
+ *
+ * Copyright (c) 2004, Intel Corporation
+ *
+ */
+
+#ifndef LIB80211_H
+#define LIB80211_H
+
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/atomic.h>
+#include <linux/if.h>
+#include <linux/skbuff.h>
+#include <linux/ieee80211.h>
+#include <linux/timer.h>
+/* print_ssid() is intended to be used in debug (and possibly error)
+ * messages. It should never be used for passing ssid to user space. */
+const char *print_ssid(char *buf, const char *ssid, u8 ssid_len);
+#define DECLARE_SSID_BUF(var) char var[IEEE80211_MAX_SSID_LEN * 4 + 1] __maybe_unused
+
+#define NUM_WEP_KEYS	4
+
+enum {
+	IEEE80211_CRYPTO_TKIP_COUNTERMEASURES = (1 << 0),
+};
+
+struct module;
+
+struct lib80211_crypto_ops {
+	const char *name;
+	struct list_head list;
+
+	/* init new crypto context (e.g., allocate private data space,
+	 * select IV, etc.); returns NULL on failure or pointer to allocated
+	 * private data on success */
+	void *(*init) (int keyidx);
+
+	/* deinitialize crypto context and free allocated private data */
+	void (*deinit) (void *priv);
+
+	/* encrypt/decrypt return < 0 on error or >= 0 on success. The return
+	 * value from decrypt_mpdu is passed as the keyidx value for
+	 * decrypt_msdu. skb must have enough head and tail room for the
+	 * encryption; if not, error will be returned; these functions are
+	 * called for all MPDUs (i.e., fragments).
+	 */
+	int (*encrypt_mpdu) (struct sk_buff * skb, int hdr_len, void *priv);
+	int (*decrypt_mpdu) (struct sk_buff * skb, int hdr_len, void *priv);
+
+	/* These functions are called for full MSDUs, i.e. full frames.
+	 * These can be NULL if full MSDU operations are not needed. */
+	int (*encrypt_msdu) (struct sk_buff * skb, int hdr_len, void *priv);
+	int (*decrypt_msdu) (struct sk_buff * skb, int keyidx, int hdr_len,
+			     void *priv);
+
+	int (*set_key) (void *key, int len, u8 * seq, void *priv);
+	int (*get_key) (void *key, int len, u8 * seq, void *priv);
+
+	/* procfs handler for printing out key information and possible
+	 * statistics */
+	char *(*print_stats) (char *p, void *priv);
+
+	/* Crypto specific flag get/set for configuration settings */
+	unsigned long (*get_flags) (void *priv);
+	unsigned long (*set_flags) (unsigned long flags, void *priv);
+
+	/* maximum number of bytes added by encryption; encrypt buf is
+	 * allocated with extra_prefix_len bytes, copy of in_buf, and
+	 * extra_postfix_len; encrypt need not use all this space, but
+	 * the result must start at the beginning of the buffer and correct
+	 * length must be returned */
+	int extra_mpdu_prefix_len, extra_mpdu_postfix_len;
+	int extra_msdu_prefix_len, extra_msdu_postfix_len;
+
+	struct module *owner;
+};
+
+struct lib80211_crypt_data {
+	struct list_head list;	/* delayed deletion list */
+	struct lib80211_crypto_ops *ops;
+	void *priv;
+	atomic_t refcnt;
+};
+
+struct lib80211_crypt_info {
+	char *name;
+	/* Most clients will already have a lock,
+	   so just point to that. */
+	spinlock_t *lock;
+
+	struct lib80211_crypt_data *crypt[NUM_WEP_KEYS];
+	int tx_keyidx;		/* default TX key index (crypt[tx_keyidx]) */
+	struct list_head crypt_deinit_list;
+	struct timer_list crypt_deinit_timer;
+	int crypt_quiesced;
+};
+
+int lib80211_crypt_info_init(struct lib80211_crypt_info *info, char *name,
+                                spinlock_t *lock);
+void lib80211_crypt_info_free(struct lib80211_crypt_info *info);
+int lib80211_register_crypto_ops(struct lib80211_crypto_ops *ops);
+int lib80211_unregister_crypto_ops(struct lib80211_crypto_ops *ops);
+struct lib80211_crypto_ops *lib80211_get_crypto_ops(const char *name);
+void lib80211_crypt_delayed_deinit(struct lib80211_crypt_info *info,
+				    struct lib80211_crypt_data **crypt);
+
+#endif /* LIB80211_H */
diff --git a/include/net/llc.h b/include/net/llc.h
new file mode 100644
index 00000000..226c846c
--- /dev/null
+++ b/include/net/llc.h
@@ -0,0 +1,159 @@
+#ifndef LLC_H
+#define LLC_H
+/*
+ * Copyright (c) 1997 by Procom Technology, Inc.
+ * 		 2001-2003 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ *
+ * This program can be redistributed or modified under the terms of the
+ * GNU General Public License as published by the Free Software Foundation.
+ * This program is distributed without any warranty or implied warranty
+ * of merchantability or fitness for a particular purpose.
+ *
+ * See the GNU General Public License for more details.
+ */
+
+#include <linux/if.h>
+#include <linux/if_ether.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/rculist_nulls.h>
+#include <linux/hash.h>
+#include <linux/jhash.h>
+
+#include <linux/atomic.h>
+
+struct net_device;
+struct packet_type;
+struct sk_buff;
+
+struct llc_addr {
+	unsigned char lsap;
+	unsigned char mac[IFHWADDRLEN];
+};
+
+#define LLC_SAP_STATE_INACTIVE	1
+#define LLC_SAP_STATE_ACTIVE	2
+
+#define LLC_SK_DEV_HASH_BITS 6
+#define LLC_SK_DEV_HASH_ENTRIES (1<<LLC_SK_DEV_HASH_BITS)
+
+#define LLC_SK_LADDR_HASH_BITS 6
+#define LLC_SK_LADDR_HASH_ENTRIES (1<<LLC_SK_LADDR_HASH_BITS)
+
+/**
+ * struct llc_sap - Defines the SAP component
+ *
+ * @station - station this sap belongs to
+ * @state - sap state
+ * @p_bit - only lowest-order bit used
+ * @f_bit - only lowest-order bit used
+ * @laddr - SAP value in this 'lsap'
+ * @node - entry in station sap_list
+ * @sk_list - LLC sockets this one manages
+ */
+struct llc_sap {
+	unsigned char	 state;
+	unsigned char	 p_bit;
+	unsigned char	 f_bit;
+	atomic_t         refcnt;
+	int		 (*rcv_func)(struct sk_buff *skb,
+				     struct net_device *dev,
+				     struct packet_type *pt,
+				     struct net_device *orig_dev);
+	struct llc_addr	 laddr;
+	struct list_head node;
+	spinlock_t sk_lock;
+	int sk_count;
+	struct hlist_nulls_head sk_laddr_hash[LLC_SK_LADDR_HASH_ENTRIES];
+	struct hlist_head sk_dev_hash[LLC_SK_DEV_HASH_ENTRIES];
+};
+
+static inline
+struct hlist_head *llc_sk_dev_hash(struct llc_sap *sap, int ifindex)
+{
+	return &sap->sk_dev_hash[ifindex % LLC_SK_DEV_HASH_ENTRIES];
+}
+
+static inline
+u32 llc_sk_laddr_hashfn(struct llc_sap *sap, const struct llc_addr *laddr)
+{
+	return hash_32(jhash(laddr->mac, sizeof(laddr->mac), 0),
+		       LLC_SK_LADDR_HASH_BITS);
+}
+
+static inline
+struct hlist_nulls_head *llc_sk_laddr_hash(struct llc_sap *sap,
+					   const struct llc_addr *laddr)
+{
+	return &sap->sk_laddr_hash[llc_sk_laddr_hashfn(sap, laddr)];
+}
+
+#define LLC_DEST_INVALID         0      /* Invalid LLC PDU type */
+#define LLC_DEST_SAP             1      /* Type 1 goes here */
+#define LLC_DEST_CONN            2      /* Type 2 goes here */
+
+extern struct list_head llc_sap_list;
+extern spinlock_t llc_sap_list_lock;
+
+extern int llc_rcv(struct sk_buff *skb, struct net_device *dev,
+		   struct packet_type *pt, struct net_device *orig_dev);
+
+extern int llc_mac_hdr_init(struct sk_buff *skb,
+			    const unsigned char *sa, const unsigned char *da);
+
+extern void llc_add_pack(int type, void (*handler)(struct llc_sap *sap,
+						   struct sk_buff *skb));
+extern void llc_remove_pack(int type);
+
+extern void llc_set_station_handler(void (*handler)(struct sk_buff *skb));
+
+extern struct llc_sap *llc_sap_open(unsigned char lsap,
+				    int (*rcv)(struct sk_buff *skb,
+					       struct net_device *dev,
+					       struct packet_type *pt,
+					       struct net_device *orig_dev));
+static inline void llc_sap_hold(struct llc_sap *sap)
+{
+	atomic_inc(&sap->refcnt);
+}
+
+extern void llc_sap_close(struct llc_sap *sap);
+
+static inline void llc_sap_put(struct llc_sap *sap)
+{
+	if (atomic_dec_and_test(&sap->refcnt))
+		llc_sap_close(sap);
+}
+
+extern struct llc_sap *llc_sap_find(unsigned char sap_value);
+
+extern int llc_build_and_send_ui_pkt(struct llc_sap *sap, struct sk_buff *skb,
+				     unsigned char *dmac, unsigned char dsap);
+
+extern void llc_sap_handler(struct llc_sap *sap, struct sk_buff *skb);
+extern void llc_conn_handler(struct llc_sap *sap, struct sk_buff *skb);
+
+extern int llc_station_init(void);
+extern void llc_station_exit(void);
+
+#ifdef CONFIG_PROC_FS
+extern int llc_proc_init(void);
+extern void llc_proc_exit(void);
+#else
+#define llc_proc_init()	(0)
+#define llc_proc_exit()	do { } while(0)
+#endif /* CONFIG_PROC_FS */
+#ifdef CONFIG_SYSCTL
+extern int llc_sysctl_init(void);
+extern void llc_sysctl_exit(void);
+
+extern int sysctl_llc2_ack_timeout;
+extern int sysctl_llc2_busy_timeout;
+extern int sysctl_llc2_p_timeout;
+extern int sysctl_llc2_rej_timeout;
+extern int sysctl_llc_station_ack_timeout;
+#else
+#define llc_sysctl_init() (0)
+#define llc_sysctl_exit() do { } while(0)
+#endif /* CONFIG_SYSCTL */
+#endif /* LLC_H */
diff --git a/include/net/llc_c_ac.h b/include/net/llc_c_ac.h
new file mode 100644
index 00000000..df83f69d
--- /dev/null
+++ b/include/net/llc_c_ac.h
@@ -0,0 +1,202 @@
+#ifndef LLC_C_AC_H
+#define LLC_C_AC_H
+/*
+ * Copyright (c) 1997 by Procom Technology,Inc.
+ * 		 2001 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ *
+ * This program can be redistributed or modified under the terms of the
+ * GNU General Public License as published by the Free Software Foundation.
+ * This program is distributed without any warranty or implied warranty
+ * of merchantability or fitness for a particular purpose.
+ *
+ * See the GNU General Public License for more details.
+ */
+/* Connection component state transition actions */
+/*
+ * Connection state transition actions
+ * (Fb = F bit; Pb = P bit; Xb = X bit)
+ */
+#define LLC_CONN_AC_CLR_REMOTE_BUSY			 1
+#define LLC_CONN_AC_CONN_IND				 2
+#define LLC_CONN_AC_CONN_CONFIRM			 3
+#define LLC_CONN_AC_DATA_IND				 4
+#define LLC_CONN_AC_DISC_IND				 5
+#define LLC_CONN_AC_RESET_IND				 6
+#define LLC_CONN_AC_RESET_CONFIRM			 7
+#define LLC_CONN_AC_REPORT_STATUS			 8
+#define LLC_CONN_AC_CLR_REMOTE_BUSY_IF_Fb_EQ_1		 9
+#define LLC_CONN_AC_STOP_REJ_TMR_IF_DATA_FLAG_EQ_2	10
+#define LLC_CONN_AC_SEND_DISC_CMD_Pb_SET_X		11
+#define LLC_CONN_AC_SEND_DM_RSP_Fb_SET_Pb		12
+#define LLC_CONN_AC_SEND_DM_RSP_Fb_SET_1		13
+#define LLC_CONN_AC_SEND_DM_RSP_Fb_SET_F_FLAG		14
+#define LLC_CONN_AC_SEND_FRMR_RSP_Fb_SET_X		15
+#define LLC_CONN_AC_RESEND_FRMR_RSP_Fb_SET_0		16
+#define LLC_CONN_AC_RESEND_FRMR_RSP_Fb_SET_Pb		17
+#define LLC_CONN_AC_SEND_I_CMD_Pb_SET_1			18
+#define LLC_CONN_AC_RESEND_I_CMD_Pb_SET_1		19
+#define LLC_CONN_AC_RESEND_I_CMD_Pb_SET_1_OR_SEND_RR	20
+#define LLC_CONN_AC_SEND_I_XXX_Xb_SET_0			21
+#define LLC_CONN_AC_RESEND_I_XXX_Xb_SET_0		22
+#define LLC_CONN_AC_RESEND_I_XXX_Xb_SET_0_OR_SEND_RR	23
+#define LLC_CONN_AC_RESEND_I_RSP_Fb_SET_1		24
+#define LLC_CONN_AC_SEND_REJ_CMD_Pb_SET_1		25
+#define LLC_CONN_AC_SEND_REJ_RSP_Fb_SET_1		26
+#define LLC_CONN_AC_SEND_REJ_XXX_Xb_SET_0		27
+#define LLC_CONN_AC_SEND_RNR_CMD_Pb_SET_1		28
+#define LLC_CONN_AC_SEND_RNR_RSP_Fb_SET_1		29
+#define LLC_CONN_AC_SEND_RNR_XXX_Xb_SET_0		30
+#define LLC_CONN_AC_SET_REMOTE_BUSY			31
+#define LLC_CONN_AC_OPTIONAL_SEND_RNR_XXX_Xb_SET_0	32
+#define LLC_CONN_AC_SEND_RR_CMD_Pb_SET_1		33
+#define LLC_CONN_AC_SEND_ACK_CMD_Pb_SET_1		34
+#define LLC_CONN_AC_SEND_RR_RSP_Fb_SET_1		35
+#define LLC_CONN_AC_SEND_ACK_RSP_Fb_SET_1		36
+#define LLC_CONN_AC_SEND_RR_XXX_Xb_SET_0		37
+#define LLC_CONN_AC_SEND_ACK_XXX_Xb_SET_0		38
+#define LLC_CONN_AC_SEND_SABME_CMD_Pb_SET_X		39
+#define LLC_CONN_AC_SEND_UA_RSP_Fb_SET_Pb		40
+#define LLC_CONN_AC_SEND_UA_RSP_Fb_SET_F_FLAG		41
+#define LLC_CONN_AC_S_FLAG_SET_0			42
+#define LLC_CONN_AC_S_FLAG_SET_1			43
+#define LLC_CONN_AC_START_P_TMR				44
+#define LLC_CONN_AC_START_ACK_TMR			45
+#define LLC_CONN_AC_START_REJ_TMR			46
+#define LLC_CONN_AC_START_ACK_TMR_IF_NOT_RUNNING	47
+#define LLC_CONN_AC_STOP_ACK_TMR			48
+#define LLC_CONN_AC_STOP_P_TMR				49
+#define LLC_CONN_AC_STOP_REJ_TMR			50
+#define LLC_CONN_AC_STOP_ALL_TMRS			51
+#define LLC_CONN_AC_STOP_OTHER_TMRS			52
+#define LLC_CONN_AC_UPDATE_Nr_RECEIVED			53
+#define LLC_CONN_AC_UPDATE_P_FLAG			54
+#define LLC_CONN_AC_DATA_FLAG_SET_2			55
+#define LLC_CONN_AC_DATA_FLAG_SET_0			56
+#define LLC_CONN_AC_DATA_FLAG_SET_1			57
+#define LLC_CONN_AC_DATA_FLAG_SET_1_IF_DATA_FLAG_EQ_0	58
+#define LLC_CONN_AC_P_FLAG_SET_0			59
+#define LLC_CONN_AC_P_FLAG_SET_P			60
+#define LLC_CONN_AC_REMOTE_BUSY_SET_0			61
+#define LLC_CONN_AC_RETRY_CNT_SET_0			62
+#define LLC_CONN_AC_RETRY_CNT_INC_BY_1			63
+#define LLC_CONN_AC_Vr_SET_0				64
+#define LLC_CONN_AC_Vr_INC_BY_1				65
+#define LLC_CONN_AC_Vs_SET_0				66
+#define LLC_CONN_AC_Vs_SET_Nr				67
+#define LLC_CONN_AC_F_FLAG_SET_P			68
+#define LLC_CONN_AC_STOP_SENDACK_TMR			70
+#define LLC_CONN_AC_START_SENDACK_TMR_IF_NOT_RUNNING	71
+
+typedef int (*llc_conn_action_t)(struct sock *sk, struct sk_buff *skb);
+
+extern int llc_conn_ac_clear_remote_busy(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ac_conn_ind(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ac_conn_confirm(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_data_ind(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_disc_ind(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_rst_ind(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_rst_confirm(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_clear_remote_busy_if_f_eq_1(struct sock* sk,
+						   struct sk_buff *skb);
+extern int llc_conn_ac_stop_rej_tmr_if_data_flag_eq_2(struct sock* sk,
+						      struct sk_buff *skb);
+extern int llc_conn_ac_send_disc_cmd_p_set_x(struct sock* sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ac_send_dm_rsp_f_set_p(struct sock* sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ac_send_dm_rsp_f_set_1(struct sock* sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ac_send_frmr_rsp_f_set_x(struct sock* sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ac_resend_frmr_rsp_f_set_0(struct sock* sk,
+					       struct sk_buff *skb);
+extern int llc_conn_ac_resend_frmr_rsp_f_set_p(struct sock* sk,
+					       struct sk_buff *skb);
+extern int llc_conn_ac_send_i_cmd_p_set_1(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_send_i_xxx_x_set_0(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_resend_i_xxx_x_set_0(struct sock* sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ac_resend_i_xxx_x_set_0_or_send_rr(struct sock* sk,
+						       struct sk_buff *skb);
+extern int llc_conn_ac_resend_i_rsp_f_set_1(struct sock* sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ac_send_rej_cmd_p_set_1(struct sock* sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ac_send_rej_rsp_f_set_1(struct sock* sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ac_send_rej_xxx_x_set_0(struct sock* sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ac_send_rnr_cmd_p_set_1(struct sock* sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ac_send_rnr_rsp_f_set_1(struct sock* sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ac_send_rnr_xxx_x_set_0(struct sock* sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ac_set_remote_busy(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_opt_send_rnr_xxx_x_set_0(struct sock* sk,
+						struct sk_buff *skb);
+extern int llc_conn_ac_send_rr_cmd_p_set_1(struct sock* sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ac_send_rr_rsp_f_set_1(struct sock* sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ac_send_ack_rsp_f_set_1(struct sock* sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ac_send_rr_xxx_x_set_0(struct sock* sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ac_send_ack_xxx_x_set_0(struct sock* sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ac_send_sabme_cmd_p_set_x(struct sock* sk,
+					      struct sk_buff *skb);
+extern int llc_conn_ac_send_ua_rsp_f_set_p(struct sock* sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ac_set_s_flag_0(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_set_s_flag_1(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_start_p_timer(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_start_ack_timer(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_start_rej_timer(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_start_ack_tmr_if_not_running(struct sock* sk,
+						    struct sk_buff *skb);
+extern int llc_conn_ac_stop_ack_timer(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_stop_p_timer(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_stop_rej_timer(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_stop_all_timers(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_stop_other_timers(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_upd_nr_received(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_inc_tx_win_size(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_dec_tx_win_size(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_upd_p_flag(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_set_data_flag_2(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_set_data_flag_0(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_set_data_flag_1(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_set_data_flag_1_if_data_flag_eq_0(struct sock* sk,
+							 struct sk_buff *skb);
+extern int llc_conn_ac_set_p_flag_0(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_set_remote_busy_0(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_set_retry_cnt_0(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_set_cause_flag_0(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_set_cause_flag_1(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_inc_retry_cnt_by_1(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_set_vr_0(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_inc_vr_by_1(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_set_vs_0(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_set_vs_nr(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_rst_vs(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_upd_vs(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_disc(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_reset(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_disc_confirm(struct sock* sk, struct sk_buff *skb);
+extern u8 llc_circular_between(u8 a, u8 b, u8 c);
+extern int llc_conn_ac_send_ack_if_needed(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_adjust_npta_by_rr(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_adjust_npta_by_rnr(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_rst_sendack_flag(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_send_i_rsp_as_ack(struct sock* sk, struct sk_buff *skb);
+extern int llc_conn_ac_send_i_as_ack(struct sock* sk, struct sk_buff *skb);
+
+extern void llc_conn_busy_tmr_cb(unsigned long timeout_data);
+extern void llc_conn_pf_cycle_tmr_cb(unsigned long timeout_data);
+extern void llc_conn_ack_tmr_cb(unsigned long timeout_data);
+extern void llc_conn_rej_tmr_cb(unsigned long timeout_data);
+
+extern void llc_conn_set_p_flag(struct sock *sk, u8 value);
+#endif /* LLC_C_AC_H */
diff --git a/include/net/llc_c_ev.h b/include/net/llc_c_ev.h
new file mode 100644
index 00000000..23a40938
--- /dev/null
+++ b/include/net/llc_c_ev.h
@@ -0,0 +1,269 @@
+#ifndef LLC_C_EV_H
+#define LLC_C_EV_H
+/*
+ * Copyright (c) 1997 by Procom Technology,Inc.
+ *		 2001 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ *
+ * This program can be redistributed or modified under the terms of the
+ * GNU General Public License as published by the Free Software Foundation.
+ * This program is distributed without any warranty or implied warranty
+ * of merchantability or fitness for a particular purpose.
+ *
+ * See the GNU General Public License for more details.
+ */
+
+#include <net/sock.h>
+
+/* Connection component state transition event qualifiers */
+/* Types of events (possible values in 'ev->type') */
+#define LLC_CONN_EV_TYPE_SIMPLE		 1
+#define LLC_CONN_EV_TYPE_CONDITION	 2
+#define LLC_CONN_EV_TYPE_PRIM		 3
+#define LLC_CONN_EV_TYPE_PDU		 4	/* command/response PDU */
+#define LLC_CONN_EV_TYPE_ACK_TMR	 5
+#define LLC_CONN_EV_TYPE_P_TMR		 6
+#define LLC_CONN_EV_TYPE_REJ_TMR	 7
+#define LLC_CONN_EV_TYPE_BUSY_TMR	 8
+#define LLC_CONN_EV_TYPE_RPT_STATUS	 9
+#define LLC_CONN_EV_TYPE_SENDACK_TMR	10
+
+#define NBR_CONN_EV		   5
+/* Connection events which cause state transitions when fully qualified */
+
+#define LLC_CONN_EV_CONN_REQ				 1
+#define LLC_CONN_EV_CONN_RESP				 2
+#define LLC_CONN_EV_DATA_REQ				 3
+#define LLC_CONN_EV_DISC_REQ				 4
+#define LLC_CONN_EV_RESET_REQ				 5
+#define LLC_CONN_EV_RESET_RESP				 6
+#define LLC_CONN_EV_LOCAL_BUSY_DETECTED			 7
+#define LLC_CONN_EV_LOCAL_BUSY_CLEARED			 8
+#define LLC_CONN_EV_RX_BAD_PDU				 9
+#define LLC_CONN_EV_RX_DISC_CMD_Pbit_SET_X		10
+#define LLC_CONN_EV_RX_DM_RSP_Fbit_SET_X		11
+#define LLC_CONN_EV_RX_FRMR_RSP_Fbit_SET_X		12
+#define LLC_CONN_EV_RX_I_CMD_Pbit_SET_X			13
+#define LLC_CONN_EV_RX_I_CMD_Pbit_SET_X_UNEXPD_Ns	14
+#define LLC_CONN_EV_RX_I_CMD_Pbit_SET_X_INVAL_Ns	15
+#define LLC_CONN_EV_RX_I_RSP_Fbit_SET_X			16
+#define LLC_CONN_EV_RX_I_RSP_Fbit_SET_X_UNEXPD_Ns	17
+#define LLC_CONN_EV_RX_I_RSP_Fbit_SET_X_INVAL_Ns	18
+#define LLC_CONN_EV_RX_REJ_CMD_Pbit_SET_X		19
+#define LLC_CONN_EV_RX_REJ_RSP_Fbit_SET_X		20
+#define LLC_CONN_EV_RX_RNR_CMD_Pbit_SET_X		21
+#define LLC_CONN_EV_RX_RNR_RSP_Fbit_SET_X		22
+#define LLC_CONN_EV_RX_RR_CMD_Pbit_SET_X		23
+#define LLC_CONN_EV_RX_RR_RSP_Fbit_SET_X		24
+#define LLC_CONN_EV_RX_SABME_CMD_Pbit_SET_X		25
+#define LLC_CONN_EV_RX_UA_RSP_Fbit_SET_X		26
+#define LLC_CONN_EV_RX_XXX_CMD_Pbit_SET_X		27
+#define LLC_CONN_EV_RX_XXX_RSP_Fbit_SET_X		28
+#define LLC_CONN_EV_RX_XXX_YYY				29
+#define LLC_CONN_EV_RX_ZZZ_CMD_Pbit_SET_X_INVAL_Nr	30
+#define LLC_CONN_EV_RX_ZZZ_RSP_Fbit_SET_X_INVAL_Nr	31
+#define LLC_CONN_EV_P_TMR_EXP				32
+#define LLC_CONN_EV_ACK_TMR_EXP				33
+#define LLC_CONN_EV_REJ_TMR_EXP				34
+#define LLC_CONN_EV_BUSY_TMR_EXP			35
+#define LLC_CONN_EV_RX_XXX_CMD_Pbit_SET_1		36
+#define LLC_CONN_EV_RX_XXX_CMD_Pbit_SET_0		37
+#define LLC_CONN_EV_RX_I_CMD_Pbit_SET_0_UNEXPD_Ns	38
+#define LLC_CONN_EV_RX_I_RSP_Fbit_SET_0_UNEXPD_Ns	39
+#define LLC_CONN_EV_RX_I_RSP_Fbit_SET_1_UNEXPD_Ns	40
+#define LLC_CONN_EV_RX_I_CMD_Pbit_SET_1_UNEXPD_Ns	41
+#define LLC_CONN_EV_RX_I_CMD_Pbit_SET_0			42
+#define LLC_CONN_EV_RX_I_RSP_Fbit_SET_0			43
+#define LLC_CONN_EV_RX_I_CMD_Pbit_SET_1			44
+#define LLC_CONN_EV_RX_RR_CMD_Pbit_SET_0		45
+#define LLC_CONN_EV_RX_RR_RSP_Fbit_SET_0		46
+#define LLC_CONN_EV_RX_RR_RSP_Fbit_SET_1		47
+#define LLC_CONN_EV_RX_RR_CMD_Pbit_SET_1		48
+#define LLC_CONN_EV_RX_RNR_CMD_Pbit_SET_0		49
+#define LLC_CONN_EV_RX_RNR_RSP_Fbit_SET_0		50
+#define LLC_CONN_EV_RX_RNR_RSP_Fbit_SET_1		51
+#define LLC_CONN_EV_RX_RNR_CMD_Pbit_SET_1		52
+#define LLC_CONN_EV_RX_REJ_CMD_Pbit_SET_0		53
+#define LLC_CONN_EV_RX_REJ_RSP_Fbit_SET_0		54
+#define LLC_CONN_EV_RX_REJ_CMD_Pbit_SET_1		55
+#define LLC_CONN_EV_RX_I_RSP_Fbit_SET_1			56
+#define LLC_CONN_EV_RX_REJ_RSP_Fbit_SET_1		57
+#define LLC_CONN_EV_RX_XXX_RSP_Fbit_SET_1		58
+#define LLC_CONN_EV_TX_BUFF_FULL			59
+
+#define LLC_CONN_EV_INIT_P_F_CYCLE			100
+/*
+ * Connection event qualifiers; for some events a certain combination of
+ * these qualifiers must be TRUE before event recognized valid for state;
+ * these constants act as indexes into the Event Qualifier function
+ * table
+ */
+#define LLC_CONN_EV_QFY_DATA_FLAG_EQ_1		 1
+#define LLC_CONN_EV_QFY_DATA_FLAG_EQ_0		 2
+#define LLC_CONN_EV_QFY_DATA_FLAG_EQ_2		 3
+#define LLC_CONN_EV_QFY_P_FLAG_EQ_1		 4
+#define LLC_CONN_EV_QFY_P_FLAG_EQ_0		 5
+#define LLC_CONN_EV_QFY_P_FLAG_EQ_Fbit		 6
+#define LLC_CONN_EV_QFY_REMOTE_BUSY_EQ_0	 7
+#define LLC_CONN_EV_QFY_RETRY_CNT_LT_N2		 8
+#define LLC_CONN_EV_QFY_RETRY_CNT_GTE_N2	 9
+#define LLC_CONN_EV_QFY_S_FLAG_EQ_1		10
+#define LLC_CONN_EV_QFY_S_FLAG_EQ_0		11
+#define LLC_CONN_EV_QFY_INIT_P_F_CYCLE		12
+
+struct llc_conn_state_ev {
+	u8 type;
+	u8 prim;
+	u8 prim_type;
+	u8 reason;
+	u8 status;
+	u8 ind_prim;
+	u8 cfm_prim;
+};
+
+static __inline__ struct llc_conn_state_ev *llc_conn_ev(struct sk_buff *skb)
+{
+	return (struct llc_conn_state_ev *)skb->cb;
+}
+
+typedef int (*llc_conn_ev_t)(struct sock *sk, struct sk_buff *skb);
+typedef int (*llc_conn_ev_qfyr_t)(struct sock *sk, struct sk_buff *skb);
+
+extern int llc_conn_ev_conn_req(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_data_req(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_disc_req(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_rst_req(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_local_busy_detected(struct sock *sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ev_local_busy_cleared(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_rx_bad_pdu(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_rx_disc_cmd_pbit_set_x(struct sock *sk,
+					      struct sk_buff *skb);
+extern int llc_conn_ev_rx_dm_rsp_fbit_set_x(struct sock *sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ev_rx_frmr_rsp_fbit_set_x(struct sock *sk,
+					      struct sk_buff *skb);
+extern int llc_conn_ev_rx_i_cmd_pbit_set_x_inval_ns(struct sock *sk,
+						    struct sk_buff *skb);
+extern int llc_conn_ev_rx_i_rsp_fbit_set_x(struct sock *sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ev_rx_i_rsp_fbit_set_x_unexpd_ns(struct sock *sk,
+						  struct sk_buff *skb);
+extern int llc_conn_ev_rx_i_rsp_fbit_set_x_inval_ns(struct sock *sk,
+						  struct sk_buff *skb);
+extern int llc_conn_ev_rx_rej_rsp_fbit_set_x(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_rx_sabme_cmd_pbit_set_x(struct sock *sk,
+					       struct sk_buff *skb);
+extern int llc_conn_ev_rx_ua_rsp_fbit_set_x(struct sock *sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ev_rx_xxx_cmd_pbit_set_x(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_rx_xxx_rsp_fbit_set_x(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_rx_zzz_cmd_pbit_set_x_inval_nr(struct sock *sk,
+						      struct sk_buff *skb);
+extern int llc_conn_ev_rx_zzz_rsp_fbit_set_x_inval_nr(struct sock *sk,
+						      struct sk_buff *skb);
+extern int llc_conn_ev_p_tmr_exp(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_ack_tmr_exp(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_rej_tmr_exp(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_busy_tmr_exp(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_sendack_tmr_exp(struct sock *sk, struct sk_buff *skb);
+/* NOT_USED functions and their variations */
+extern int llc_conn_ev_rx_xxx_cmd_pbit_set_1(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_rx_xxx_rsp_fbit_set_1(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_rx_i_cmd_pbit_set_0_unexpd_ns(struct sock *sk,
+						  struct sk_buff *skb);
+extern int llc_conn_ev_rx_i_cmd_pbit_set_1_unexpd_ns(struct sock *sk,
+						  struct sk_buff *skb);
+extern int llc_conn_ev_rx_i_cmd_pbit_set_0(struct sock *sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ev_rx_i_cmd_pbit_set_1(struct sock *sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ev_rx_i_rsp_fbit_set_0_unexpd_ns(struct sock *sk,
+						  struct sk_buff *skb);
+extern int llc_conn_ev_rx_i_rsp_fbit_set_1_unexpd_ns(struct sock *sk,
+						  struct sk_buff *skb);
+extern int llc_conn_ev_rx_i_rsp_fbit_set_0(struct sock *sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ev_rx_i_rsp_fbit_set_1(struct sock *sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ev_rx_rr_cmd_pbit_set_0(struct sock *sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ev_rx_rr_cmd_pbit_set_1(struct sock *sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ev_rx_rr_rsp_fbit_set_0(struct sock *sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ev_rx_rr_rsp_fbit_set_1(struct sock *sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ev_rx_rnr_cmd_pbit_set_0(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_rx_rnr_cmd_pbit_set_1(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_rx_rnr_rsp_fbit_set_0(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_rx_rnr_rsp_fbit_set_1(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_rx_rej_cmd_pbit_set_0(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_rx_rej_cmd_pbit_set_1(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_rx_rej_rsp_fbit_set_0(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_rx_rej_rsp_fbit_set_1(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_rx_any_frame(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_tx_buffer_full(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_init_p_f_cycle(struct sock *sk, struct sk_buff *skb);
+
+/* Available connection action qualifiers */
+extern int llc_conn_ev_qlfy_data_flag_eq_1(struct sock *sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_data_flag_eq_0(struct sock *sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_data_flag_eq_2(struct sock *sk,
+					   struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_p_flag_eq_1(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_last_frame_eq_1(struct sock *sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_last_frame_eq_0(struct sock *sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_p_flag_eq_0(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_p_flag_eq_f(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_remote_busy_eq_0(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_remote_busy_eq_1(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_retry_cnt_lt_n2(struct sock *sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_retry_cnt_gte_n2(struct sock *sk,
+					     struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_s_flag_eq_1(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_s_flag_eq_0(struct sock *sk, struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_cause_flag_eq_1(struct sock *sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_cause_flag_eq_0(struct sock *sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_set_status_conn(struct sock *sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_set_status_disc(struct sock *sk,
+					    struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_set_status_failed(struct sock *sk,
+					      struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_set_status_remote_busy(struct sock *sk,
+						  struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_set_status_refuse(struct sock *sk,
+					      struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_set_status_conflict(struct sock *sk,
+						struct sk_buff *skb);
+extern int llc_conn_ev_qlfy_set_status_rst_done(struct sock *sk,
+						struct sk_buff *skb);
+
+static __inline__ int llc_conn_space(struct sock *sk, struct sk_buff *skb)
+{
+	return atomic_read(&sk->sk_rmem_alloc) + skb->truesize <
+	       (unsigned)sk->sk_rcvbuf;
+}
+#endif /* LLC_C_EV_H */
diff --git a/include/net/llc_c_st.h b/include/net/llc_c_st.h
new file mode 100644
index 00000000..0e79cfba
--- /dev/null
+++ b/include/net/llc_c_st.h
@@ -0,0 +1,48 @@
+#ifndef LLC_C_ST_H
+#define LLC_C_ST_H
+/*
+ * Copyright (c) 1997 by Procom Technology,Inc.
+ *		2001 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ *
+ * This program can be redistributed or modified under the terms of the
+ * GNU General Public License as published by the Free Software Foundation.
+ * This program is distributed without any warranty or implied warranty
+ * of merchantability or fitness for a particular purpose.
+ *
+ * See the GNU General Public License for more details.
+ */
+/* Connection component state management */
+/* connection states */
+#define LLC_CONN_OUT_OF_SVC		 0	/* prior to allocation */
+ 
+#define LLC_CONN_STATE_ADM		 1	/* disc, initial state */
+#define LLC_CONN_STATE_SETUP		 2	/* disconnected state */
+#define LLC_CONN_STATE_NORMAL		 3	/* connected state */
+#define LLC_CONN_STATE_BUSY		 4	/* connected state */
+#define LLC_CONN_STATE_REJ		 5	/* connected state */
+#define LLC_CONN_STATE_AWAIT		 6	/* connected state */
+#define LLC_CONN_STATE_AWAIT_BUSY	 7	/* connected state */
+#define LLC_CONN_STATE_AWAIT_REJ	 8	/* connected state */
+#define LLC_CONN_STATE_D_CONN		 9	/* disconnected state */
+#define LLC_CONN_STATE_RESET		10	/* disconnected state */
+#define LLC_CONN_STATE_ERROR		11	/* disconnected state */
+#define LLC_CONN_STATE_TEMP		12	/* disconnected state */
+
+#define NBR_CONN_STATES			12	/* size of state table */
+#define NO_STATE_CHANGE			100
+
+/* Connection state table structure */
+struct llc_conn_state_trans {
+	llc_conn_ev_t	   ev;
+	u8		   next_state;
+	llc_conn_ev_qfyr_t *ev_qualifiers;
+	llc_conn_action_t  *ev_actions;
+};
+
+struct llc_conn_state {
+	u8			    current_state;
+	struct llc_conn_state_trans **transitions;
+};
+
+extern struct llc_conn_state llc_conn_state_table[];
+#endif /* LLC_C_ST_H */
diff --git a/include/net/llc_conn.h b/include/net/llc_conn.h
new file mode 100644
index 00000000..2f97d8dd
--- /dev/null
+++ b/include/net/llc_conn.h
@@ -0,0 +1,122 @@
+#ifndef LLC_CONN_H
+#define LLC_CONN_H
+/*
+ * Copyright (c) 1997 by Procom Technology, Inc.
+ * 		 2001, 2002 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ *
+ * This program can be redistributed or modified under the terms of the
+ * GNU General Public License as published by the Free Software Foundation.
+ * This program is distributed without any warranty or implied warranty
+ * of merchantability or fitness for a particular purpose.
+ *
+ * See the GNU General Public License for more details.
+ */
+#include <linux/timer.h>
+#include <net/llc_if.h>
+#include <net/sock.h>
+#include <linux/llc.h>
+
+#define LLC_EVENT                1
+#define LLC_PACKET               2
+
+#define LLC2_P_TIME               2
+#define LLC2_ACK_TIME             1
+#define LLC2_REJ_TIME             3
+#define LLC2_BUSY_TIME            3
+
+struct llc_timer {
+	struct timer_list timer;
+	unsigned long	  expire;	/* timer expire time */
+};
+
+struct llc_sock {
+	/* struct sock must be the first member of llc_sock */
+	struct sock	    sk;
+	struct sockaddr_llc addr;		/* address sock is bound to */
+	u8		    state;		/* state of connection */
+	struct llc_sap	    *sap;		/* pointer to parent SAP */
+	struct llc_addr	    laddr;		/* lsap/mac pair */
+	struct llc_addr	    daddr;		/* dsap/mac pair */
+	struct net_device   *dev;		/* device to send to remote */
+	u32		    copied_seq;		/* head of yet unread data */
+	u8		    retry_count;	/* number of retries */
+	u8		    ack_must_be_send;
+	u8		    first_pdu_Ns;
+	u8		    npta;
+	struct llc_timer    ack_timer;
+	struct llc_timer    pf_cycle_timer;
+	struct llc_timer    rej_sent_timer;
+	struct llc_timer    busy_state_timer;	/* ind busy clr at remote LLC */
+	u8		    vS;			/* seq# next in-seq I-PDU tx'd*/
+	u8		    vR;			/* seq# next in-seq I-PDU rx'd*/
+	u32		    n2;			/* max nbr re-tx's for timeout*/
+	u32		    n1;			/* max nbr octets in I PDU */
+	u8		    k;			/* tx window size; max = 127 */
+	u8		    rw;			/* rx window size; max = 127 */
+	u8		    p_flag;		/* state flags */
+	u8		    f_flag;
+	u8		    s_flag;
+	u8		    data_flag;
+	u8		    remote_busy_flag;
+	u8		    cause_flag;
+	struct sk_buff_head pdu_unack_q;	/* PUDs sent/waiting ack */
+	u16		    link;		/* network layer link number */
+	u8		    X;			/* a temporary variable */
+	u8		    ack_pf;		/* this flag indicates what is
+						   the P-bit of acknowledge */
+	u8		    failed_data_req; /* recognize that already exist a
+						failed llc_data_req_handler
+						(tx_buffer_full or unacceptable
+						state */
+	u8		    dec_step;
+	u8		    inc_cntr;
+	u8		    dec_cntr;
+	u8		    connect_step;
+	u8		    last_nr;	   /* NR of last pdu received */
+	u32		    rx_pdu_hdr;	   /* used for saving header of last pdu
+					      received and caused sending FRMR.
+					      Used for resending FRMR */
+	u32		    cmsg_flags;
+	struct hlist_node   dev_hash_node;
+};
+
+static inline struct llc_sock *llc_sk(const struct sock *sk)
+{
+	return (struct llc_sock *)sk;
+}
+
+static __inline__ void llc_set_backlog_type(struct sk_buff *skb, char type)
+{
+	skb->cb[sizeof(skb->cb) - 1] = type;
+}
+
+static __inline__ char llc_backlog_type(struct sk_buff *skb)
+{
+	return skb->cb[sizeof(skb->cb) - 1];
+}
+
+extern struct sock *llc_sk_alloc(struct net *net, int family, gfp_t priority,
+				 struct proto *prot);
+extern void llc_sk_free(struct sock *sk);
+
+extern void llc_sk_reset(struct sock *sk);
+
+/* Access to a connection */
+extern int llc_conn_state_process(struct sock *sk, struct sk_buff *skb);
+extern void llc_conn_send_pdu(struct sock *sk, struct sk_buff *skb);
+extern void llc_conn_rtn_pdu(struct sock *sk, struct sk_buff *skb);
+extern void llc_conn_resend_i_pdu_as_cmd(struct sock *sk, u8 nr,
+					 u8 first_p_bit);
+extern void llc_conn_resend_i_pdu_as_rsp(struct sock *sk, u8 nr,
+					 u8 first_f_bit);
+extern int llc_conn_remove_acked_pdus(struct sock *conn, u8 nr,
+				      u16 *how_many_unacked);
+extern struct sock *llc_lookup_established(struct llc_sap *sap,
+					   struct llc_addr *daddr,
+					   struct llc_addr *laddr);
+extern void llc_sap_add_socket(struct llc_sap *sap, struct sock *sk);
+extern void llc_sap_remove_socket(struct llc_sap *sap, struct sock *sk);
+
+extern u8 llc_data_accept_state(u8 state);
+extern void llc_build_offset_table(void);
+#endif /* LLC_CONN_H */
diff --git a/include/net/llc_if.h b/include/net/llc_if.h
new file mode 100644
index 00000000..b595a004
--- /dev/null
+++ b/include/net/llc_if.h
@@ -0,0 +1,99 @@
+#ifndef LLC_IF_H
+#define LLC_IF_H
+/*
+ * Copyright (c) 1997 by Procom Technology,Inc.
+ * 		 2001 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ *
+ * This program can be redistributed or modified under the terms of the
+ * GNU General Public License as published by the Free Software Foundation.
+ * This program is distributed without any warranty or implied warranty
+ * of merchantability or fitness for a particular purpose.
+ *
+ * See the GNU General Public License for more details.
+ */
+/* Defines LLC interface to network layer */
+/* Available primitives */
+#include <linux/if.h>
+#include <linux/if_arp.h>
+#include <linux/llc.h>
+#include <linux/etherdevice.h>
+#include <net/llc.h>
+
+#define LLC_DATAUNIT_PRIM	1
+#define LLC_CONN_PRIM		2
+#define LLC_DATA_PRIM		3
+#define LLC_DISC_PRIM		4
+#define LLC_RESET_PRIM		5
+#define LLC_FLOWCONTROL_PRIM	6 /* Not supported at this time */
+#define LLC_DISABLE_PRIM	7
+#define LLC_XID_PRIM		8
+#define LLC_TEST_PRIM		9
+#define LLC_SAP_ACTIVATION     10
+#define LLC_SAP_DEACTIVATION   11
+
+#define LLC_NBR_PRIMITIVES     11
+
+#define LLC_IND			1
+#define LLC_CONFIRM		2
+
+/* Primitive type */
+#define LLC_PRIM_TYPE_REQ	1
+#define LLC_PRIM_TYPE_IND	2
+#define LLC_PRIM_TYPE_RESP	3
+#define LLC_PRIM_TYPE_CONFIRM	4
+
+/* Reset reasons, remote entity or local LLC */
+#define LLC_RESET_REASON_REMOTE	1
+#define LLC_RESET_REASON_LOCAL	2
+
+/* Disconnect reasons */
+#define LLC_DISC_REASON_RX_DM_RSP_PDU	0
+#define LLC_DISC_REASON_RX_DISC_CMD_PDU	1
+#define LLC_DISC_REASON_ACK_TMR_EXP	2
+
+/* Confirm reasons */
+#define LLC_STATUS_CONN		0 /* connect confirm & reset confirm */
+#define LLC_STATUS_DISC		1 /* connect confirm & reset confirm */
+#define LLC_STATUS_FAILED	2 /* connect confirm & reset confirm */
+#define LLC_STATUS_IMPOSSIBLE	3 /* connect confirm */
+#define LLC_STATUS_RECEIVED	4 /* data conn */
+#define LLC_STATUS_REMOTE_BUSY	5 /* data conn */
+#define LLC_STATUS_REFUSE	6 /* data conn */
+#define LLC_STATUS_CONFLICT	7 /* disconnect conn */
+#define LLC_STATUS_RESET_DONE	8 /*  */
+
+/**
+ *      llc_mac_null - determines if a address is a null mac address
+ *      @mac: Mac address to test if null.
+ *
+ *      Determines if a given address is a null mac address.  Returns 0 if the
+ *      address is not a null mac, 1 if the address is a null mac.
+ */
+static inline int llc_mac_null(const u8 *mac)
+{
+	return is_zero_ether_addr(mac);
+}
+
+static inline int llc_mac_multicast(const u8 *mac)
+{
+	return is_multicast_ether_addr(mac);
+}
+/**
+ *	llc_mac_match - determines if two mac addresses are the same
+ *	@mac1: First mac address to compare.
+ *	@mac2: Second mac address to compare.
+ *
+ *	Determines if two given mac address are the same.  Returns 0 if there
+ *	is not a complete match up to len, 1 if a complete match up to len is
+ *	found.
+ */
+static inline int llc_mac_match(const u8 *mac1, const u8 *mac2)
+{
+	return !compare_ether_addr(mac1, mac2);
+}
+
+extern int llc_establish_connection(struct sock *sk, u8 *lmac,
+				    u8 *dmac, u8 dsap);
+extern int llc_build_and_send_pkt(struct sock *sk, struct sk_buff *skb);
+extern int llc_send_disc(struct sock *sk);
+#endif /* LLC_IF_H */
diff --git a/include/net/llc_pdu.h b/include/net/llc_pdu.h
new file mode 100644
index 00000000..f57e7d46
--- /dev/null
+++ b/include/net/llc_pdu.h
@@ -0,0 +1,437 @@
+#ifndef LLC_PDU_H
+#define LLC_PDU_H
+/*
+ * Copyright (c) 1997 by Procom Technology,Inc.
+ * 		 2001-2003 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ *
+ * This program can be redistributed or modified under the terms of the
+ * GNU General Public License as published by the Free Software Foundation.
+ * This program is distributed without any warranty or implied warranty
+ * of merchantability or fitness for a particular purpose.
+ *
+ * See the GNU General Public License for more details.
+ */
+
+#include <linux/if_ether.h>
+#include <linux/if_tr.h>
+
+/* Lengths of frame formats */
+#define LLC_PDU_LEN_I	4       /* header and 2 control bytes */
+#define LLC_PDU_LEN_S	4
+#define LLC_PDU_LEN_U	3       /* header and 1 control byte */
+/* Known SAP addresses */
+#define LLC_GLOBAL_SAP	0xFF
+#define LLC_NULL_SAP	0x00	/* not network-layer visible */
+#define LLC_MGMT_INDIV	0x02	/* station LLC mgmt indiv addr */
+#define LLC_MGMT_GRP	0x03	/* station LLC mgmt group addr */
+#define LLC_RDE_SAP	0xA6	/* route ... */
+
+/* SAP field bit masks */
+#define LLC_ISO_RESERVED_SAP	0x02
+#define LLC_SAP_GROUP_DSAP	0x01
+#define LLC_SAP_RESP_SSAP	0x01
+
+/* Group/individual DSAP indicator is DSAP field */
+#define LLC_PDU_GROUP_DSAP_MASK    0x01
+#define LLC_PDU_IS_GROUP_DSAP(pdu)      \
+	((pdu->dsap & LLC_PDU_GROUP_DSAP_MASK) ? 0 : 1)
+#define LLC_PDU_IS_INDIV_DSAP(pdu)      \
+	(!(pdu->dsap & LLC_PDU_GROUP_DSAP_MASK) ? 0 : 1)
+
+/* Command/response PDU indicator in SSAP field */
+#define LLC_PDU_CMD_RSP_MASK	0x01
+#define LLC_PDU_CMD		0
+#define LLC_PDU_RSP		1
+#define LLC_PDU_IS_CMD(pdu)    ((pdu->ssap & LLC_PDU_RSP) ? 0 : 1)
+#define LLC_PDU_IS_RSP(pdu)    ((pdu->ssap & LLC_PDU_RSP) ? 1 : 0)
+
+/* Get PDU type from 2 lowest-order bits of control field first byte */
+#define LLC_PDU_TYPE_I_MASK    0x01	/* 16-bit control field */
+#define LLC_PDU_TYPE_S_MASK    0x03
+#define LLC_PDU_TYPE_U_MASK    0x03	/* 8-bit control field */
+#define LLC_PDU_TYPE_MASK      0x03
+
+#define LLC_PDU_TYPE_I	0	/* first bit */
+#define LLC_PDU_TYPE_S	1	/* first two bits */
+#define LLC_PDU_TYPE_U	3	/* first two bits */
+
+#define LLC_PDU_TYPE_IS_I(pdu) \
+	((!(pdu->ctrl_1 & LLC_PDU_TYPE_I_MASK)) ? 1 : 0)
+
+#define LLC_PDU_TYPE_IS_U(pdu) \
+	(((pdu->ctrl_1 & LLC_PDU_TYPE_U_MASK) == LLC_PDU_TYPE_U) ? 1 : 0)
+
+#define LLC_PDU_TYPE_IS_S(pdu) \
+	(((pdu->ctrl_1 & LLC_PDU_TYPE_S_MASK) == LLC_PDU_TYPE_S) ? 1 : 0)
+
+/* U-format PDU control field masks */
+#define LLC_U_PF_BIT_MASK      0x10	/* P/F bit mask */
+#define LLC_U_PF_IS_1(pdu)     ((pdu->ctrl_1 & LLC_U_PF_BIT_MASK) ? 1 : 0)
+#define LLC_U_PF_IS_0(pdu)     ((!(pdu->ctrl_1 & LLC_U_PF_BIT_MASK)) ? 1 : 0)
+
+#define LLC_U_PDU_CMD_MASK     0xEC	/* cmd/rsp mask */
+#define LLC_U_PDU_CMD(pdu)     (pdu->ctrl_1 & LLC_U_PDU_CMD_MASK)
+#define LLC_U_PDU_RSP(pdu)     (pdu->ctrl_1 & LLC_U_PDU_CMD_MASK)
+
+#define LLC_1_PDU_CMD_UI       0x00	/* Type 1 cmds/rsps */
+#define LLC_1_PDU_CMD_XID      0xAC
+#define LLC_1_PDU_CMD_TEST     0xE0
+
+#define LLC_2_PDU_CMD_SABME    0x6C	/* Type 2 cmds/rsps */
+#define LLC_2_PDU_CMD_DISC     0x40
+#define LLC_2_PDU_RSP_UA       0x60
+#define LLC_2_PDU_RSP_DM       0x0C
+#define LLC_2_PDU_RSP_FRMR     0x84
+
+/* Type 1 operations */
+
+/* XID information field bit masks */
+
+/* LLC format identifier (byte 1) */
+#define LLC_XID_FMT_ID		0x81	/* first byte must be this */
+
+/* LLC types/classes identifier (byte 2) */
+#define LLC_XID_CLASS_ZEROS_MASK	0xE0	/* these must be zeros */
+#define LLC_XID_CLASS_MASK		0x1F	/* AND with byte to get below */
+
+#define LLC_XID_NULL_CLASS_1	0x01	/* if NULL LSAP...use these */
+#define LLC_XID_NULL_CLASS_2	0x03
+#define LLC_XID_NULL_CLASS_3	0x05
+#define LLC_XID_NULL_CLASS_4	0x07
+
+#define LLC_XID_NNULL_TYPE_1	0x01	/* if non-NULL LSAP...use these */
+#define LLC_XID_NNULL_TYPE_2	0x02
+#define LLC_XID_NNULL_TYPE_3	0x04
+#define LLC_XID_NNULL_TYPE_1_2	0x03
+#define LLC_XID_NNULL_TYPE_1_3	0x05
+#define LLC_XID_NNULL_TYPE_2_3	0x06
+#define LLC_XID_NNULL_ALL		0x07
+
+/* Sender Receive Window (byte 3) */
+#define LLC_XID_RW_MASK	0xFE	/* AND with value to get below */
+
+#define LLC_XID_MIN_RW	0x02	/* lowest-order bit always zero */
+
+/* Type 2 operations */
+
+#define LLC_2_SEQ_NBR_MODULO   ((u8) 128)
+
+/* I-PDU masks ('ctrl' is I-PDU control word) */
+#define LLC_I_GET_NS(pdu)     (u8)((pdu->ctrl_1 & 0xFE) >> 1)
+#define LLC_I_GET_NR(pdu)     (u8)((pdu->ctrl_2 & 0xFE) >> 1)
+
+#define LLC_I_PF_BIT_MASK      0x01
+
+#define LLC_I_PF_IS_0(pdu)     ((!(pdu->ctrl_2 & LLC_I_PF_BIT_MASK)) ? 1 : 0)
+#define LLC_I_PF_IS_1(pdu)     ((pdu->ctrl_2 & LLC_I_PF_BIT_MASK) ? 1 : 0)
+
+/* S-PDU supervisory commands and responses */
+
+#define LLC_S_PDU_CMD_MASK     0x0C
+#define LLC_S_PDU_CMD(pdu)     (pdu->ctrl_1 & LLC_S_PDU_CMD_MASK)
+#define LLC_S_PDU_RSP(pdu)     (pdu->ctrl_1 & LLC_S_PDU_CMD_MASK)
+
+#define LLC_2_PDU_CMD_RR       0x00	/* rx ready cmd */
+#define LLC_2_PDU_RSP_RR       0x00	/* rx ready rsp */
+#define LLC_2_PDU_CMD_REJ      0x08	/* reject PDU cmd */
+#define LLC_2_PDU_RSP_REJ      0x08	/* reject PDU rsp */
+#define LLC_2_PDU_CMD_RNR      0x04	/* rx not ready cmd */
+#define LLC_2_PDU_RSP_RNR      0x04	/* rx not ready rsp */
+
+#define LLC_S_PF_BIT_MASK      0x01
+#define LLC_S_PF_IS_0(pdu)     ((!(pdu->ctrl_2 & LLC_S_PF_BIT_MASK)) ? 1 : 0)
+#define LLC_S_PF_IS_1(pdu)     ((pdu->ctrl_2 & LLC_S_PF_BIT_MASK) ? 1 : 0)
+
+#define PDU_SUPV_GET_Nr(pdu)   ((pdu->ctrl_2 & 0xFE) >> 1)
+#define PDU_GET_NEXT_Vr(sn)    (++sn & ~LLC_2_SEQ_NBR_MODULO)
+
+/* FRMR information field macros */
+
+#define FRMR_INFO_LENGTH       5	/* 5 bytes of information */
+
+/*
+ * info is pointer to FRMR info field structure; 'rej_ctrl' is byte pointer
+ * (if U-PDU) or word pointer to rejected PDU control field
+ */
+#define FRMR_INFO_SET_REJ_CNTRL(info,rej_ctrl) \
+	info->rej_pdu_ctrl = ((*((u8 *) rej_ctrl) & \
+				LLC_PDU_TYPE_U) != LLC_PDU_TYPE_U ? \
+				(u16)*((u16 *) rej_ctrl) : \
+				(((u16) *((u8 *) rej_ctrl)) & 0x00FF))
+
+/*
+ * Info is pointer to FRMR info field structure; 'vs' is a byte containing
+ * send state variable value in low-order 7 bits (insure the lowest-order
+ * bit remains zero (0))
+ */
+#define FRMR_INFO_SET_Vs(info,vs) (info->curr_ssv = (((u8) vs) << 1))
+#define FRMR_INFO_SET_Vr(info,vr) (info->curr_rsv = (((u8) vr) << 1))
+
+/*
+ * Info is pointer to FRMR info field structure; 'cr' is a byte containing
+ * the C/R bit value in the low-order bit
+ */
+#define FRMR_INFO_SET_C_R_BIT(info, cr)  (info->curr_rsv |= (((u8) cr) & 0x01))
+
+/*
+ * In the remaining five macros, 'info' is pointer to FRMR info field
+ * structure; 'ind' is a byte containing the bit value to set in the
+ * lowest-order bit)
+ */
+#define FRMR_INFO_SET_INVALID_PDU_CTRL_IND(info, ind) \
+       (info->ind_bits = ((info->ind_bits & 0xFE) | (((u8) ind) & 0x01)))
+
+#define FRMR_INFO_SET_INVALID_PDU_INFO_IND(info, ind) \
+       (info->ind_bits = ( (info->ind_bits & 0xFD) | (((u8) ind) & 0x02)))
+
+#define FRMR_INFO_SET_PDU_INFO_2LONG_IND(info, ind) \
+       (info->ind_bits = ( (info->ind_bits & 0xFB) | (((u8) ind) & 0x04)))
+
+#define FRMR_INFO_SET_PDU_INVALID_Nr_IND(info, ind) \
+       (info->ind_bits = ( (info->ind_bits & 0xF7) | (((u8) ind) & 0x08)))
+
+#define FRMR_INFO_SET_PDU_INVALID_Ns_IND(info, ind) \
+       (info->ind_bits = ( (info->ind_bits & 0xEF) | (((u8) ind) & 0x10)))
+
+/* Sequence-numbered PDU format (4 bytes in length) */
+struct llc_pdu_sn {
+	u8 dsap;
+	u8 ssap;
+	u8 ctrl_1;
+	u8 ctrl_2;
+} __packed;
+
+static inline struct llc_pdu_sn *llc_pdu_sn_hdr(struct sk_buff *skb)
+{
+	return (struct llc_pdu_sn *)skb_network_header(skb);
+}
+
+/* Un-numbered PDU format (3 bytes in length) */
+struct llc_pdu_un {
+	u8 dsap;
+	u8 ssap;
+	u8 ctrl_1;
+} __packed;
+
+static inline struct llc_pdu_un *llc_pdu_un_hdr(struct sk_buff *skb)
+{
+	return (struct llc_pdu_un *)skb_network_header(skb);
+}
+
+/**
+ *	llc_pdu_header_init - initializes pdu header
+ *	@skb: input skb that header must be set into it.
+ *	@type: type of PDU (U, I or S).
+ *	@ssap: source sap.
+ *	@dsap: destination sap.
+ *	@cr: command/response bit (0 or 1).
+ *
+ *	This function sets DSAP, SSAP and command/Response bit in LLC header.
+ */
+static inline void llc_pdu_header_init(struct sk_buff *skb, u8 type,
+				       u8 ssap, u8 dsap, u8 cr)
+{
+	const int hlen = type == LLC_PDU_TYPE_U ? 3 : 4;
+	struct llc_pdu_un *pdu;
+
+	skb_push(skb, hlen);
+	skb_reset_network_header(skb);
+	pdu = llc_pdu_un_hdr(skb);
+	pdu->dsap = dsap;
+	pdu->ssap = ssap;
+	pdu->ssap |= cr;
+}
+
+/**
+ *	llc_pdu_decode_sa - extracs source address (MAC) of input frame
+ *	@skb: input skb that source address must be extracted from it.
+ *	@sa: pointer to source address (6 byte array).
+ *
+ *	This function extracts source address(MAC) of input frame.
+ */
+static inline void llc_pdu_decode_sa(struct sk_buff *skb, u8 *sa)
+{
+	if (skb->protocol == htons(ETH_P_802_2))
+		memcpy(sa, eth_hdr(skb)->h_source, ETH_ALEN);
+	else if (skb->protocol == htons(ETH_P_TR_802_2)) {
+		memcpy(sa, tr_hdr(skb)->saddr, ETH_ALEN);
+		*sa &= 0x7F;
+	}
+}
+
+/**
+ *	llc_pdu_decode_da - extracts dest address of input frame
+ *	@skb: input skb that destination address must be extracted from it
+ *	@sa: pointer to destination address (6 byte array).
+ *
+ *	This function extracts destination address(MAC) of input frame.
+ */
+static inline void llc_pdu_decode_da(struct sk_buff *skb, u8 *da)
+{
+	if (skb->protocol == htons(ETH_P_802_2))
+		memcpy(da, eth_hdr(skb)->h_dest, ETH_ALEN);
+	else if (skb->protocol == htons(ETH_P_TR_802_2))
+		memcpy(da, tr_hdr(skb)->daddr, ETH_ALEN);
+}
+
+/**
+ *	llc_pdu_decode_ssap - extracts source SAP of input frame
+ *	@skb: input skb that source SAP must be extracted from it.
+ *	@ssap: source SAP (output argument).
+ *
+ *	This function extracts source SAP of input frame. Right bit of SSAP is
+ *	command/response bit.
+ */
+static inline void llc_pdu_decode_ssap(struct sk_buff *skb, u8 *ssap)
+{
+	*ssap = llc_pdu_un_hdr(skb)->ssap & 0xFE;
+}
+
+/**
+ *	llc_pdu_decode_dsap - extracts dest SAP of input frame
+ *	@skb: input skb that destination SAP must be extracted from it.
+ *	@dsap: destination SAP (output argument).
+ *
+ *	This function extracts destination SAP of input frame. right bit of
+ *	DSAP designates individual/group SAP.
+ */
+static inline void llc_pdu_decode_dsap(struct sk_buff *skb, u8 *dsap)
+{
+	*dsap = llc_pdu_un_hdr(skb)->dsap & 0xFE;
+}
+
+/**
+ *	llc_pdu_init_as_ui_cmd - sets LLC header as UI PDU
+ *	@skb: input skb that header must be set into it.
+ *
+ *	This function sets third byte of LLC header as a UI PDU.
+ */
+static inline void llc_pdu_init_as_ui_cmd(struct sk_buff *skb)
+{
+	struct llc_pdu_un *pdu = llc_pdu_un_hdr(skb);
+
+	pdu->ctrl_1  = LLC_PDU_TYPE_U;
+	pdu->ctrl_1 |= LLC_1_PDU_CMD_UI;
+}
+
+/**
+ *	llc_pdu_init_as_test_cmd - sets PDU as TEST
+ *	@skb - Address of the skb to build
+ *
+ * 	Sets a PDU as TEST
+ */
+static inline void llc_pdu_init_as_test_cmd(struct sk_buff *skb)
+{
+	struct llc_pdu_un *pdu = llc_pdu_un_hdr(skb);
+
+	pdu->ctrl_1  = LLC_PDU_TYPE_U;
+	pdu->ctrl_1 |= LLC_1_PDU_CMD_TEST;
+	pdu->ctrl_1 |= LLC_U_PF_BIT_MASK;
+}
+
+/**
+ *	llc_pdu_init_as_test_rsp - build TEST response PDU
+ *	@skb: Address of the skb to build
+ *	@ev_skb: The received TEST command PDU frame
+ *
+ *	Builds a pdu frame as a TEST response.
+ */
+static inline void llc_pdu_init_as_test_rsp(struct sk_buff *skb,
+					    struct sk_buff *ev_skb)
+{
+	struct llc_pdu_un *pdu = llc_pdu_un_hdr(skb);
+
+	pdu->ctrl_1  = LLC_PDU_TYPE_U;
+	pdu->ctrl_1 |= LLC_1_PDU_CMD_TEST;
+	pdu->ctrl_1 |= LLC_U_PF_BIT_MASK;
+	if (ev_skb->protocol == htons(ETH_P_802_2)) {
+		struct llc_pdu_un *ev_pdu = llc_pdu_un_hdr(ev_skb);
+		int dsize;
+
+		dsize = ntohs(eth_hdr(ev_skb)->h_proto) - 3;
+		memcpy(((u8 *)pdu) + 3, ((u8 *)ev_pdu) + 3, dsize);
+		skb_put(skb, dsize);
+	}
+}
+
+/* LLC Type 1 XID command/response information fields format */
+struct llc_xid_info {
+	u8 fmt_id;	/* always 0x81 for LLC */
+	u8 type;	/* different if NULL/non-NULL LSAP */
+	u8 rw;		/* sender receive window */
+} __packed;
+
+/**
+ *	llc_pdu_init_as_xid_cmd - sets bytes 3, 4 & 5 of LLC header as XID
+ *	@skb: input skb that header must be set into it.
+ *
+ *	This function sets third,fourth,fifth and sixth bytes of LLC header as
+ *	a XID PDU.
+ */
+static inline void llc_pdu_init_as_xid_cmd(struct sk_buff *skb,
+					   u8 svcs_supported, u8 rx_window)
+{
+	struct llc_xid_info *xid_info;
+	struct llc_pdu_un *pdu = llc_pdu_un_hdr(skb);
+
+	pdu->ctrl_1	 = LLC_PDU_TYPE_U;
+	pdu->ctrl_1	|= LLC_1_PDU_CMD_XID;
+	pdu->ctrl_1	|= LLC_U_PF_BIT_MASK;
+	xid_info	 = (struct llc_xid_info *)(((u8 *)&pdu->ctrl_1) + 1);
+	xid_info->fmt_id = LLC_XID_FMT_ID;	/* 0x81 */
+	xid_info->type	 = svcs_supported;
+	xid_info->rw	 = rx_window << 1;	/* size of receive window */
+	skb_put(skb, sizeof(struct llc_xid_info));
+}
+
+/**
+ *	llc_pdu_init_as_xid_rsp - builds XID response PDU
+ *	@skb: Address of the skb to build
+ *	@svcs_supported: The class of the LLC (I or II)
+ *	@rx_window: The size of the receive window of the LLC
+ *
+ *	Builds a pdu frame as an XID response.
+ */
+static inline void llc_pdu_init_as_xid_rsp(struct sk_buff *skb,
+					   u8 svcs_supported, u8 rx_window)
+{
+	struct llc_xid_info *xid_info;
+	struct llc_pdu_un *pdu = llc_pdu_un_hdr(skb);
+
+	pdu->ctrl_1	 = LLC_PDU_TYPE_U;
+	pdu->ctrl_1	|= LLC_1_PDU_CMD_XID;
+	pdu->ctrl_1	|= LLC_U_PF_BIT_MASK;
+
+	xid_info	 = (struct llc_xid_info *)(((u8 *)&pdu->ctrl_1) + 1);
+	xid_info->fmt_id = LLC_XID_FMT_ID;
+	xid_info->type	 = svcs_supported;
+	xid_info->rw	 = rx_window << 1;
+	skb_put(skb, sizeof(struct llc_xid_info));
+}
+
+/* LLC Type 2 FRMR response information field format */
+struct llc_frmr_info {
+	u16 rej_pdu_ctrl;	/* bits 1-8 if U-PDU */
+	u8  curr_ssv;		/* current send state variable val */
+	u8  curr_rsv;		/* current receive state variable */
+	u8  ind_bits;		/* indicator bits set with macro */
+} __packed;
+
+extern void llc_pdu_set_cmd_rsp(struct sk_buff *skb, u8 type);
+extern void llc_pdu_set_pf_bit(struct sk_buff *skb, u8 bit_value);
+extern void llc_pdu_decode_pf_bit(struct sk_buff *skb, u8 *pf_bit);
+extern void llc_pdu_init_as_disc_cmd(struct sk_buff *skb, u8 p_bit);
+extern void llc_pdu_init_as_i_cmd(struct sk_buff *skb, u8 p_bit, u8 ns, u8 nr);
+extern void llc_pdu_init_as_rej_cmd(struct sk_buff *skb, u8 p_bit, u8 nr);
+extern void llc_pdu_init_as_rnr_cmd(struct sk_buff *skb, u8 p_bit, u8 nr);
+extern void llc_pdu_init_as_rr_cmd(struct sk_buff *skb, u8 p_bit, u8 nr);
+extern void llc_pdu_init_as_sabme_cmd(struct sk_buff *skb, u8 p_bit);
+extern void llc_pdu_init_as_dm_rsp(struct sk_buff *skb, u8 f_bit);
+extern void llc_pdu_init_as_frmr_rsp(struct sk_buff *skb,
+				     struct llc_pdu_sn *prev_pdu,
+				     u8 f_bit, u8 vs, u8 vr, u8 vzyxw);
+extern void llc_pdu_init_as_rr_rsp(struct sk_buff *skb, u8 f_bit, u8 nr);
+extern void llc_pdu_init_as_rej_rsp(struct sk_buff *skb, u8 f_bit, u8 nr);
+extern void llc_pdu_init_as_rnr_rsp(struct sk_buff *skb, u8 f_bit, u8 nr);
+extern void llc_pdu_init_as_ua_rsp(struct sk_buff *skb, u8 f_bit);
+#endif /* LLC_PDU_H */
diff --git a/include/net/llc_s_ac.h b/include/net/llc_s_ac.h
new file mode 100644
index 00000000..37a3bbd0
--- /dev/null
+++ b/include/net/llc_s_ac.h
@@ -0,0 +1,39 @@
+#ifndef LLC_S_AC_H
+#define LLC_S_AC_H
+/*
+ * Copyright (c) 1997 by Procom Technology,Inc.
+ * 		 2001 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ *
+ * This program can be redistributed or modified under the terms of the
+ * GNU General Public License as published by the Free Software Foundation.
+ * This program is distributed without any warranty or implied warranty
+ * of merchantability or fitness for a particular purpose.
+ *
+ * See the GNU General Public License for more details.
+ */
+/* SAP component actions */
+#define SAP_ACT_UNITDATA_IND	1
+#define SAP_ACT_SEND_UI		2
+#define SAP_ACT_SEND_XID_C	3
+#define SAP_ACT_SEND_XID_R	4
+#define SAP_ACT_SEND_TEST_C	5
+#define SAP_ACT_SEND_TEST_R	6
+#define SAP_ACT_REPORT_STATUS	7
+#define SAP_ACT_XID_IND		8
+#define SAP_ACT_TEST_IND	9
+
+/* All action functions must look like this */
+typedef int (*llc_sap_action_t)(struct llc_sap *sap, struct sk_buff *skb);
+
+extern int llc_sap_action_unitdata_ind(struct llc_sap *sap,
+				       struct sk_buff *skb);
+extern int llc_sap_action_send_ui(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_action_send_xid_c(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_action_send_xid_r(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_action_send_test_c(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_action_send_test_r(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_action_report_status(struct llc_sap *sap,
+					struct sk_buff *skb);
+extern int llc_sap_action_xid_ind(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_action_test_ind(struct llc_sap *sap, struct sk_buff *skb);
+#endif /* LLC_S_AC_H */
diff --git a/include/net/llc_s_ev.h b/include/net/llc_s_ev.h
new file mode 100644
index 00000000..e3acb932
--- /dev/null
+++ b/include/net/llc_s_ev.h
@@ -0,0 +1,67 @@
+#ifndef LLC_S_EV_H
+#define LLC_S_EV_H
+/*
+ * Copyright (c) 1997 by Procom Technology,Inc.
+ * 		 2001 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ *
+ * This program can be redistributed or modified under the terms of the
+ * GNU General Public License as published by the Free Software Foundation.
+ * This program is distributed without any warranty or implied warranty
+ * of merchantability or fitness for a particular purpose.
+ *
+ * See the GNU General Public License for more details.
+ */
+
+#include <linux/skbuff.h>
+
+/* Defines SAP component events */
+/* Types of events (possible values in 'ev->type') */
+#define LLC_SAP_EV_TYPE_SIMPLE		1
+#define LLC_SAP_EV_TYPE_CONDITION	2
+#define LLC_SAP_EV_TYPE_PRIM		3
+#define LLC_SAP_EV_TYPE_PDU		4   /* command/response PDU */
+#define LLC_SAP_EV_TYPE_ACK_TMR		5
+#define LLC_SAP_EV_TYPE_RPT_STATUS	6
+
+#define LLC_SAP_EV_ACTIVATION_REQ	 1
+#define LLC_SAP_EV_RX_UI		 2
+#define LLC_SAP_EV_UNITDATA_REQ		 3
+#define LLC_SAP_EV_XID_REQ		 4
+#define LLC_SAP_EV_RX_XID_C		 5
+#define LLC_SAP_EV_RX_XID_R		 6
+#define LLC_SAP_EV_TEST_REQ		 7
+#define LLC_SAP_EV_RX_TEST_C		 8
+#define LLC_SAP_EV_RX_TEST_R		 9
+#define LLC_SAP_EV_DEACTIVATION_REQ	10
+
+struct llc_sap_state_ev {
+	u8		prim;
+	u8		prim_type;
+	u8		type;
+	u8		reason;
+	u8		ind_cfm_flag;
+	struct llc_addr saddr;
+	struct llc_addr daddr;
+};
+
+static __inline__ struct llc_sap_state_ev *llc_sap_ev(struct sk_buff *skb)
+{
+	return (struct llc_sap_state_ev *)skb->cb;
+}
+
+struct llc_sap;
+
+typedef int (*llc_sap_ev_t)(struct llc_sap *sap, struct sk_buff *skb);
+
+extern int llc_sap_ev_activation_req(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_ev_rx_ui(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_ev_unitdata_req(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_ev_xid_req(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_ev_rx_xid_c(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_ev_rx_xid_r(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_ev_test_req(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_ev_rx_test_c(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_ev_rx_test_r(struct llc_sap *sap, struct sk_buff *skb);
+extern int llc_sap_ev_deactivation_req(struct llc_sap *sap,
+				       struct sk_buff *skb);
+#endif /* LLC_S_EV_H */
diff --git a/include/net/llc_s_st.h b/include/net/llc_s_st.h
new file mode 100644
index 00000000..567c681f
--- /dev/null
+++ b/include/net/llc_s_st.h
@@ -0,0 +1,32 @@
+#ifndef LLC_S_ST_H
+#define LLC_S_ST_H
+/*
+ * Copyright (c) 1997 by Procom Technology,Inc.
+ * 		 2001 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ *
+ * This program can be redistributed or modified under the terms of the
+ * GNU General Public License as published by the Free Software Foundation.
+ * This program is distributed without any warranty or implied warranty
+ * of merchantability or fitness for a particular purpose.
+ *
+ * See the GNU General Public License for more details.
+ */
+
+#define LLC_NR_SAP_STATES	2       /* size of state table */
+
+/* structures and types */
+/* SAP state table structure */
+struct llc_sap_state_trans {
+	llc_sap_ev_t	  ev;
+	u8		  next_state;
+	llc_sap_action_t *ev_actions;
+};
+
+struct llc_sap_state {
+	u8			   curr_state;
+	struct llc_sap_state_trans **transitions;
+};
+
+/* only access to SAP state table */
+extern struct llc_sap_state llc_sap_state_table[LLC_NR_SAP_STATES];
+#endif /* LLC_S_ST_H */
diff --git a/include/net/llc_sap.h b/include/net/llc_sap.h
new file mode 100644
index 00000000..ed25bec2
--- /dev/null
+++ b/include/net/llc_sap.h
@@ -0,0 +1,36 @@
+#ifndef LLC_SAP_H
+#define LLC_SAP_H
+
+#include <asm/types.h>
+
+/*
+ * Copyright (c) 1997 by Procom Technology,Inc.
+ * 		 2001-2003 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ *
+ * This program can be redistributed or modified under the terms of the
+ * GNU General Public License as published by the Free Software Foundation.
+ * This program is distributed without any warranty or implied warranty
+ * of merchantability or fitness for a particular purpose.
+ *
+ * See the GNU General Public License for more details.
+ */
+struct llc_sap;
+struct net_device;
+struct sk_buff;
+struct sock;
+
+extern void llc_sap_rtn_pdu(struct llc_sap *sap, struct sk_buff *skb);
+extern void llc_save_primitive(struct sock *sk, struct sk_buff* skb,
+			       unsigned char prim);
+extern struct sk_buff *llc_alloc_frame(struct sock *sk, struct net_device *dev,
+				       u8 type, u32 data_size);
+
+extern void llc_build_and_send_test_pkt(struct llc_sap *sap,
+				        struct sk_buff *skb,
+					unsigned char *dmac,
+					unsigned char dsap);
+extern void llc_build_and_send_xid_pkt(struct llc_sap *sap,
+				       struct sk_buff *skb,
+				       unsigned char *dmac,
+				       unsigned char dsap);
+#endif /* LLC_SAP_H */
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
new file mode 100644
index 00000000..9210bdc7
--- /dev/null
+++ b/include/net/mac80211.h
@@ -0,0 +1,3713 @@
+/*
+ * mac80211 <-> driver interface
+ *
+ * Copyright 2002-2005, Devicescape Software, Inc.
+ * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz>
+ * Copyright 2007-2010	Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MAC80211_H
+#define MAC80211_H
+
+#include <linux/bug.h>
+#include <linux/kernel.h>
+#include <linux/if_ether.h>
+#include <linux/skbuff.h>
+#include <linux/ieee80211.h>
+#include <net/cfg80211.h>
+#include <asm/unaligned.h>
+
+/**
+ * DOC: Introduction
+ *
+ * mac80211 is the Linux stack for 802.11 hardware that implements
+ * only partial functionality in hard- or firmware. This document
+ * defines the interface between mac80211 and low-level hardware
+ * drivers.
+ */
+
+/**
+ * DOC: Calling mac80211 from interrupts
+ *
+ * Only ieee80211_tx_status_irqsafe() and ieee80211_rx_irqsafe() can be
+ * called in hardware interrupt context. The low-level driver must not call any
+ * other functions in hardware interrupt context. If there is a need for such
+ * call, the low-level driver should first ACK the interrupt and perform the
+ * IEEE 802.11 code call after this, e.g. from a scheduled workqueue or even
+ * tasklet function.
+ *
+ * NOTE: If the driver opts to use the _irqsafe() functions, it may not also
+ *	 use the non-IRQ-safe functions!
+ */
+
+/**
+ * DOC: Warning
+ *
+ * If you're reading this document and not the header file itself, it will
+ * be incomplete because not all documentation has been converted yet.
+ */
+
+/**
+ * DOC: Frame format
+ *
+ * As a general rule, when frames are passed between mac80211 and the driver,
+ * they start with the IEEE 802.11 header and include the same octets that are
+ * sent over the air except for the FCS which should be calculated by the
+ * hardware.
+ *
+ * There are, however, various exceptions to this rule for advanced features:
+ *
+ * The first exception is for hardware encryption and decryption offload
+ * where the IV/ICV may or may not be generated in hardware.
+ *
+ * Secondly, when the hardware handles fragmentation, the frame handed to
+ * the driver from mac80211 is the MSDU, not the MPDU.
+ *
+ * Finally, for received frames, the driver is able to indicate that it has
+ * filled a radiotap header and put that in front of the frame; if it does
+ * not do so then mac80211 may add this under certain circumstances.
+ */
+
+/**
+ * DOC: mac80211 workqueue
+ *
+ * mac80211 provides its own workqueue for drivers and internal mac80211 use.
+ * The workqueue is a single threaded workqueue and can only be accessed by
+ * helpers for sanity checking. Drivers must ensure all work added onto the
+ * mac80211 workqueue should be cancelled on the driver stop() callback.
+ *
+ * mac80211 will flushed the workqueue upon interface removal and during
+ * suspend.
+ *
+ * All work performed on the mac80211 workqueue must not acquire the RTNL lock.
+ *
+ */
+
+struct device;
+
+/**
+ * enum ieee80211_max_queues - maximum number of queues
+ *
+ * @IEEE80211_MAX_QUEUES: Maximum number of regular device queues.
+ */
+enum ieee80211_max_queues {
+	IEEE80211_MAX_QUEUES =		4,
+};
+
+/**
+ * enum ieee80211_ac_numbers - AC numbers as used in mac80211
+ * @IEEE80211_AC_VO: voice
+ * @IEEE80211_AC_VI: video
+ * @IEEE80211_AC_BE: best effort
+ * @IEEE80211_AC_BK: background
+ */
+enum ieee80211_ac_numbers {
+	IEEE80211_AC_VO		= 0,
+	IEEE80211_AC_VI		= 1,
+	IEEE80211_AC_BE		= 2,
+	IEEE80211_AC_BK		= 3,
+};
+#define IEEE80211_NUM_ACS	4
+
+/**
+ * struct ieee80211_tx_queue_params - transmit queue configuration
+ *
+ * The information provided in this structure is required for QoS
+ * transmit queue configuration. Cf. IEEE 802.11 7.3.2.29.
+ *
+ * @aifs: arbitration interframe space [0..255]
+ * @cw_min: minimum contention window [a value of the form
+ *	2^n-1 in the range 1..32767]
+ * @cw_max: maximum contention window [like @cw_min]
+ * @txop: maximum burst time in units of 32 usecs, 0 meaning disabled
+ * @uapsd: is U-APSD mode enabled for the queue
+ */
+struct ieee80211_tx_queue_params {
+	u16 txop;
+	u16 cw_min;
+	u16 cw_max;
+	u8 aifs;
+	bool uapsd;
+};
+
+struct ieee80211_low_level_stats {
+	unsigned int dot11ACKFailureCount;
+	unsigned int dot11RTSFailureCount;
+	unsigned int dot11FCSErrorCount;
+	unsigned int dot11RTSSuccessCount;
+};
+
+/**
+ * enum ieee80211_bss_change - BSS change notification flags
+ *
+ * These flags are used with the bss_info_changed() callback
+ * to indicate which BSS parameter changed.
+ *
+ * @BSS_CHANGED_ASSOC: association status changed (associated/disassociated),
+ *	also implies a change in the AID.
+ * @BSS_CHANGED_ERP_CTS_PROT: CTS protection changed
+ * @BSS_CHANGED_ERP_PREAMBLE: preamble changed
+ * @BSS_CHANGED_ERP_SLOT: slot timing changed
+ * @BSS_CHANGED_HT: 802.11n parameters changed
+ * @BSS_CHANGED_BASIC_RATES: Basic rateset changed
+ * @BSS_CHANGED_BEACON_INT: Beacon interval changed
+ * @BSS_CHANGED_BSSID: BSSID changed, for whatever
+ *	reason (IBSS and managed mode)
+ * @BSS_CHANGED_BEACON: Beacon data changed, retrieve
+ *	new beacon (beaconing modes)
+ * @BSS_CHANGED_BEACON_ENABLED: Beaconing should be
+ *	enabled/disabled (beaconing modes)
+ * @BSS_CHANGED_CQM: Connection quality monitor config changed
+ * @BSS_CHANGED_IBSS: IBSS join status changed
+ * @BSS_CHANGED_ARP_FILTER: Hardware ARP filter address list or state changed.
+ * @BSS_CHANGED_QOS: QoS for this association was enabled/disabled. Note
+ *	that it is only ever disabled for station mode.
+ * @BSS_CHANGED_IDLE: Idle changed for this BSS/interface.
+ * @BSS_CHANGED_SSID: SSID changed for this BSS (AP mode)
+ * @BSS_CHANGED_AP_PROBE_RESP: Probe Response changed for this BSS (AP mode)
+ */
+enum ieee80211_bss_change {
+	BSS_CHANGED_ASSOC		= 1<<0,
+	BSS_CHANGED_ERP_CTS_PROT	= 1<<1,
+	BSS_CHANGED_ERP_PREAMBLE	= 1<<2,
+	BSS_CHANGED_ERP_SLOT		= 1<<3,
+	BSS_CHANGED_HT			= 1<<4,
+	BSS_CHANGED_BASIC_RATES		= 1<<5,
+	BSS_CHANGED_BEACON_INT		= 1<<6,
+	BSS_CHANGED_BSSID		= 1<<7,
+	BSS_CHANGED_BEACON		= 1<<8,
+	BSS_CHANGED_BEACON_ENABLED	= 1<<9,
+	BSS_CHANGED_CQM			= 1<<10,
+	BSS_CHANGED_IBSS		= 1<<11,
+	BSS_CHANGED_ARP_FILTER		= 1<<12,
+	BSS_CHANGED_QOS			= 1<<13,
+	BSS_CHANGED_IDLE		= 1<<14,
+	BSS_CHANGED_SSID		= 1<<15,
+	BSS_CHANGED_AP_PROBE_RESP	= 1<<16,
+
+	/* when adding here, make sure to change ieee80211_reconfig */
+};
+
+/*
+ * The maximum number of IPv4 addresses listed for ARP filtering. If the number
+ * of addresses for an interface increase beyond this value, hardware ARP
+ * filtering will be disabled.
+ */
+#define IEEE80211_BSS_ARP_ADDR_LIST_LEN 4
+
+/**
+ * enum ieee80211_rssi_event - RSSI threshold event
+ * An indicator for when RSSI goes below/above a certain threshold.
+ * @RSSI_EVENT_HIGH: AP's rssi crossed the high threshold set by the driver.
+ * @RSSI_EVENT_LOW: AP's rssi crossed the low threshold set by the driver.
+ */
+enum ieee80211_rssi_event {
+	RSSI_EVENT_HIGH,
+	RSSI_EVENT_LOW,
+};
+
+/**
+ * struct ieee80211_bss_conf - holds the BSS's changing parameters
+ *
+ * This structure keeps information about a BSS (and an association
+ * to that BSS) that can change during the lifetime of the BSS.
+ *
+ * @assoc: association status
+ * @ibss_joined: indicates whether this station is part of an IBSS
+ *	or not
+ * @aid: association ID number, valid only when @assoc is true
+ * @use_cts_prot: use CTS protection
+ * @use_short_preamble: use 802.11b short preamble;
+ *	if the hardware cannot handle this it must set the
+ *	IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE hardware flag
+ * @use_short_slot: use short slot time (only relevant for ERP);
+ *	if the hardware cannot handle this it must set the
+ *	IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE hardware flag
+ * @dtim_period: num of beacons before the next DTIM, for beaconing,
+ *	valid in station mode only while @assoc is true and if also
+ *	requested by %IEEE80211_HW_NEED_DTIM_PERIOD (cf. also hw conf
+ *	@ps_dtim_period)
+ * @last_tsf: last beacon's/probe response's TSF timestamp (could be old
+ *	as it may have been received during scanning long ago)
+ * @beacon_int: beacon interval
+ * @assoc_capability: capabilities taken from assoc resp
+ * @basic_rates: bitmap of basic rates, each bit stands for an
+ *	index into the rate table configured by the driver in
+ *	the current band.
+ * @mcast_rate: per-band multicast rate index + 1 (0: disabled)
+ * @bssid: The BSSID for this BSS
+ * @enable_beacon: whether beaconing should be enabled or not
+ * @channel_type: Channel type for this BSS -- the hardware might be
+ *	configured for HT40+ while this BSS only uses no-HT, for
+ *	example.
+ * @ht_operation_mode: HT operation mode (like in &struct ieee80211_ht_info).
+ *	This field is only valid when the channel type is one of the HT types.
+ * @cqm_rssi_thold: Connection quality monitor RSSI threshold, a zero value
+ *	implies disabled
+ * @cqm_rssi_hyst: Connection quality monitor RSSI hysteresis
+ * @arp_addr_list: List of IPv4 addresses for hardware ARP filtering. The
+ *	may filter ARP queries targeted for other addresses than listed here.
+ *	The driver must allow ARP queries targeted for all address listed here
+ *	to pass through. An empty list implies no ARP queries need to pass.
+ * @arp_addr_cnt: Number of addresses currently on the list.
+ * @arp_filter_enabled: Enable ARP filtering - if enabled, the hardware may
+ *	filter ARP queries based on the @arp_addr_list, if disabled, the
+ *	hardware must not perform any ARP filtering. Note, that the filter will
+ *	be enabled also in promiscuous mode.
+ * @qos: This is a QoS-enabled BSS.
+ * @idle: This interface is idle. There's also a global idle flag in the
+ *	hardware config which may be more appropriate depending on what
+ *	your driver/device needs to do.
+ * @ssid: The SSID of the current vif. Only valid in AP-mode.
+ * @ssid_len: Length of SSID given in @ssid.
+ * @hidden_ssid: The SSID of the current vif is hidden. Only valid in AP-mode.
+ */
+struct ieee80211_bss_conf {
+	const u8 *bssid;
+	/* association related data */
+	bool assoc, ibss_joined;
+	u16 aid;
+	/* erp related data */
+	bool use_cts_prot;
+	bool use_short_preamble;
+	bool use_short_slot;
+	bool enable_beacon;
+	u8 dtim_period;
+	u16 beacon_int;
+	u16 assoc_capability;
+	u64 last_tsf;
+	u32 basic_rates;
+	int mcast_rate[IEEE80211_NUM_BANDS];
+	u16 ht_operation_mode;
+	s32 cqm_rssi_thold;
+	u32 cqm_rssi_hyst;
+	enum nl80211_channel_type channel_type;
+	__be32 arp_addr_list[IEEE80211_BSS_ARP_ADDR_LIST_LEN];
+	u8 arp_addr_cnt;
+	bool arp_filter_enabled;
+	bool qos;
+	bool idle;
+	u8 ssid[IEEE80211_MAX_SSID_LEN];
+	size_t ssid_len;
+	bool hidden_ssid;
+};
+
+/**
+ * enum mac80211_tx_control_flags - flags to describe transmission information/status
+ *
+ * These flags are used with the @flags member of &ieee80211_tx_info.
+ *
+ * @IEEE80211_TX_CTL_REQ_TX_STATUS: require TX status callback for this frame.
+ * @IEEE80211_TX_CTL_ASSIGN_SEQ: The driver has to assign a sequence
+ *	number to this frame, taking care of not overwriting the fragment
+ *	number and increasing the sequence number only when the
+ *	IEEE80211_TX_CTL_FIRST_FRAGMENT flag is set. mac80211 will properly
+ *	assign sequence numbers to QoS-data frames but cannot do so correctly
+ *	for non-QoS-data and management frames because beacons need them from
+ *	that counter as well and mac80211 cannot guarantee proper sequencing.
+ *	If this flag is set, the driver should instruct the hardware to
+ *	assign a sequence number to the frame or assign one itself. Cf. IEEE
+ *	802.11-2007 7.1.3.4.1 paragraph 3. This flag will always be set for
+ *	beacons and always be clear for frames without a sequence number field.
+ * @IEEE80211_TX_CTL_NO_ACK: tell the low level not to wait for an ack
+ * @IEEE80211_TX_CTL_CLEAR_PS_FILT: clear powersave filter for destination
+ *	station
+ * @IEEE80211_TX_CTL_FIRST_FRAGMENT: this is a first fragment of the frame
+ * @IEEE80211_TX_CTL_SEND_AFTER_DTIM: send this frame after DTIM beacon
+ * @IEEE80211_TX_CTL_AMPDU: this frame should be sent as part of an A-MPDU
+ * @IEEE80211_TX_CTL_INJECTED: Frame was injected, internal to mac80211.
+ * @IEEE80211_TX_STAT_TX_FILTERED: The frame was not transmitted
+ *	because the destination STA was in powersave mode. Note that to
+ *	avoid race conditions, the filter must be set by the hardware or
+ *	firmware upon receiving a frame that indicates that the station
+ *	went to sleep (must be done on device to filter frames already on
+ *	the queue) and may only be unset after mac80211 gives the OK for
+ *	that by setting the IEEE80211_TX_CTL_CLEAR_PS_FILT (see above),
+ *	since only then is it guaranteed that no more frames are in the
+ *	hardware queue.
+ * @IEEE80211_TX_STAT_ACK: Frame was acknowledged
+ * @IEEE80211_TX_STAT_AMPDU: The frame was aggregated, so status
+ * 	is for the whole aggregation.
+ * @IEEE80211_TX_STAT_AMPDU_NO_BACK: no block ack was returned,
+ * 	so consider using block ack request (BAR).
+ * @IEEE80211_TX_CTL_RATE_CTRL_PROBE: internal to mac80211, can be
+ *	set by rate control algorithms to indicate probe rate, will
+ *	be cleared for fragmented frames (except on the last fragment)
+ * @IEEE80211_TX_INTFL_NEED_TXPROCESSING: completely internal to mac80211,
+ *	used to indicate that a pending frame requires TX processing before
+ *	it can be sent out.
+ * @IEEE80211_TX_INTFL_RETRIED: completely internal to mac80211,
+ *	used to indicate that a frame was already retried due to PS
+ * @IEEE80211_TX_INTFL_DONT_ENCRYPT: completely internal to mac80211,
+ *	used to indicate frame should not be encrypted
+ * @IEEE80211_TX_CTL_NO_PS_BUFFER: This frame is a response to a poll
+ *	frame (PS-Poll or uAPSD) or a non-bufferable MMPDU and must
+ *	be sent although the station is in powersave mode.
+ * @IEEE80211_TX_CTL_MORE_FRAMES: More frames will be passed to the
+ *	transmit function after the current frame, this can be used
+ *	by drivers to kick the DMA queue only if unset or when the
+ *	queue gets full.
+ * @IEEE80211_TX_INTFL_RETRANSMISSION: This frame is being retransmitted
+ *	after TX status because the destination was asleep, it must not
+ *	be modified again (no seqno assignment, crypto, etc.)
+ * @IEEE80211_TX_INTFL_NL80211_FRAME_TX: Frame was requested through nl80211
+ *	MLME command (internal to mac80211 to figure out whether to send TX
+ *	status to user space)
+ * @IEEE80211_TX_CTL_LDPC: tells the driver to use LDPC for this frame
+ * @IEEE80211_TX_CTL_STBC: Enables Space-Time Block Coding (STBC) for this
+ *	frame and selects the maximum number of streams that it can use.
+ * @IEEE80211_TX_CTL_TX_OFFCHAN: Marks this packet to be transmitted on
+ *	the off-channel channel when a remain-on-channel offload is done
+ *	in hardware -- normal packets still flow and are expected to be
+ *	handled properly by the device.
+ * @IEEE80211_TX_INTFL_TKIP_MIC_FAILURE: Marks this packet to be used for TKIP
+ *	testing. It will be sent out with incorrect Michael MIC key to allow
+ *	TKIP countermeasures to be tested.
+ * @IEEE80211_TX_CTL_NO_CCK_RATE: This frame will be sent at non CCK rate.
+ *	This flag is actually used for management frame especially for P2P
+ *	frames not being sent at CCK rate in 2GHz band.
+ * @IEEE80211_TX_STATUS_EOSP: This packet marks the end of service period,
+ *	when its status is reported the service period ends. For frames in
+ *	an SP that mac80211 transmits, it is already set; for driver frames
+ *	the driver may set this flag. It is also used to do the same for
+ *	PS-Poll responses.
+ * @IEEE80211_TX_CTL_USE_MINRATE: This frame will be sent at lowest rate.
+ *	This flag is used to send nullfunc frame at minimum rate when
+ *	the nullfunc is used for connection monitoring purpose.
+ * @IEEE80211_TX_CTL_DONTFRAG: Don't fragment this packet even if it
+ *	would be fragmented by size (this is optional, only used for
+ *	monitor injection).
+ *
+ * Note: If you have to add new flags to the enumeration, then don't
+ *	 forget to update %IEEE80211_TX_TEMPORARY_FLAGS when necessary.
+ */
+enum mac80211_tx_control_flags {
+	IEEE80211_TX_CTL_REQ_TX_STATUS		= BIT(0),
+	IEEE80211_TX_CTL_ASSIGN_SEQ		= BIT(1),
+	IEEE80211_TX_CTL_NO_ACK			= BIT(2),
+	IEEE80211_TX_CTL_CLEAR_PS_FILT		= BIT(3),
+	IEEE80211_TX_CTL_FIRST_FRAGMENT		= BIT(4),
+	IEEE80211_TX_CTL_SEND_AFTER_DTIM	= BIT(5),
+	IEEE80211_TX_CTL_AMPDU			= BIT(6),
+	IEEE80211_TX_CTL_INJECTED		= BIT(7),
+	IEEE80211_TX_STAT_TX_FILTERED		= BIT(8),
+	IEEE80211_TX_STAT_ACK			= BIT(9),
+	IEEE80211_TX_STAT_AMPDU			= BIT(10),
+	IEEE80211_TX_STAT_AMPDU_NO_BACK		= BIT(11),
+	IEEE80211_TX_CTL_RATE_CTRL_PROBE	= BIT(12),
+	IEEE80211_TX_INTFL_NEED_TXPROCESSING	= BIT(14),
+	IEEE80211_TX_INTFL_RETRIED		= BIT(15),
+	IEEE80211_TX_INTFL_DONT_ENCRYPT		= BIT(16),
+	IEEE80211_TX_CTL_NO_PS_BUFFER		= BIT(17),
+	IEEE80211_TX_CTL_MORE_FRAMES		= BIT(18),
+	IEEE80211_TX_INTFL_RETRANSMISSION	= BIT(19),
+	/* hole at 20, use later */
+	IEEE80211_TX_INTFL_NL80211_FRAME_TX	= BIT(21),
+	IEEE80211_TX_CTL_LDPC			= BIT(22),
+	IEEE80211_TX_CTL_STBC			= BIT(23) | BIT(24),
+	IEEE80211_TX_CTL_TX_OFFCHAN		= BIT(25),
+	IEEE80211_TX_INTFL_TKIP_MIC_FAILURE	= BIT(26),
+	IEEE80211_TX_CTL_NO_CCK_RATE		= BIT(27),
+	IEEE80211_TX_STATUS_EOSP		= BIT(28),
+	IEEE80211_TX_CTL_USE_MINRATE		= BIT(29),
+	IEEE80211_TX_CTL_DONTFRAG		= BIT(30),
+};
+
+#define IEEE80211_TX_CTL_STBC_SHIFT		23
+
+/*
+ * This definition is used as a mask to clear all temporary flags, which are
+ * set by the tx handlers for each transmission attempt by the mac80211 stack.
+ */
+#define IEEE80211_TX_TEMPORARY_FLAGS (IEEE80211_TX_CTL_NO_ACK |		      \
+	IEEE80211_TX_CTL_CLEAR_PS_FILT | IEEE80211_TX_CTL_FIRST_FRAGMENT |    \
+	IEEE80211_TX_CTL_SEND_AFTER_DTIM | IEEE80211_TX_CTL_AMPDU |	      \
+	IEEE80211_TX_STAT_TX_FILTERED |	IEEE80211_TX_STAT_ACK |		      \
+	IEEE80211_TX_STAT_AMPDU | IEEE80211_TX_STAT_AMPDU_NO_BACK |	      \
+	IEEE80211_TX_CTL_RATE_CTRL_PROBE | IEEE80211_TX_CTL_NO_PS_BUFFER |    \
+	IEEE80211_TX_CTL_MORE_FRAMES | IEEE80211_TX_CTL_LDPC |		      \
+	IEEE80211_TX_CTL_STBC | IEEE80211_TX_STATUS_EOSP)
+
+/**
+ * enum mac80211_rate_control_flags - per-rate flags set by the
+ *	Rate Control algorithm.
+ *
+ * These flags are set by the Rate control algorithm for each rate during tx,
+ * in the @flags member of struct ieee80211_tx_rate.
+ *
+ * @IEEE80211_TX_RC_USE_RTS_CTS: Use RTS/CTS exchange for this rate.
+ * @IEEE80211_TX_RC_USE_CTS_PROTECT: CTS-to-self protection is required.
+ *	This is set if the current BSS requires ERP protection.
+ * @IEEE80211_TX_RC_USE_SHORT_PREAMBLE: Use short preamble.
+ * @IEEE80211_TX_RC_MCS: HT rate.
+ * @IEEE80211_TX_RC_GREEN_FIELD: Indicates whether this rate should be used in
+ *	Greenfield mode.
+ * @IEEE80211_TX_RC_40_MHZ_WIDTH: Indicates if the Channel Width should be 40 MHz.
+ * @IEEE80211_TX_RC_DUP_DATA: The frame should be transmitted on both of the
+ *	adjacent 20 MHz channels, if the current channel type is
+ *	NL80211_CHAN_HT40MINUS or NL80211_CHAN_HT40PLUS.
+ * @IEEE80211_TX_RC_SHORT_GI: Short Guard interval should be used for this rate.
+ */
+enum mac80211_rate_control_flags {
+	IEEE80211_TX_RC_USE_RTS_CTS		= BIT(0),
+	IEEE80211_TX_RC_USE_CTS_PROTECT		= BIT(1),
+	IEEE80211_TX_RC_USE_SHORT_PREAMBLE	= BIT(2),
+
+	/* rate index is an MCS rate number instead of an index */
+	IEEE80211_TX_RC_MCS			= BIT(3),
+	IEEE80211_TX_RC_GREEN_FIELD		= BIT(4),
+	IEEE80211_TX_RC_40_MHZ_WIDTH		= BIT(5),
+	IEEE80211_TX_RC_DUP_DATA		= BIT(6),
+	IEEE80211_TX_RC_SHORT_GI		= BIT(7),
+};
+
+
+/* there are 40 bytes if you don't need the rateset to be kept */
+#define IEEE80211_TX_INFO_DRIVER_DATA_SIZE 40
+
+/* if you do need the rateset, then you have less space */
+#define IEEE80211_TX_INFO_RATE_DRIVER_DATA_SIZE 24
+
+/* maximum number of rate stages */
+#define IEEE80211_TX_MAX_RATES	5
+
+/**
+ * struct ieee80211_tx_rate - rate selection/status
+ *
+ * @idx: rate index to attempt to send with
+ * @flags: rate control flags (&enum mac80211_rate_control_flags)
+ * @count: number of tries in this rate before going to the next rate
+ *
+ * A value of -1 for @idx indicates an invalid rate and, if used
+ * in an array of retry rates, that no more rates should be tried.
+ *
+ * When used for transmit status reporting, the driver should
+ * always report the rate along with the flags it used.
+ *
+ * &struct ieee80211_tx_info contains an array of these structs
+ * in the control information, and it will be filled by the rate
+ * control algorithm according to what should be sent. For example,
+ * if this array contains, in the format { <idx>, <count> } the
+ * information
+ *    { 3, 2 }, { 2, 2 }, { 1, 4 }, { -1, 0 }, { -1, 0 }
+ * then this means that the frame should be transmitted
+ * up to twice at rate 3, up to twice at rate 2, and up to four
+ * times at rate 1 if it doesn't get acknowledged. Say it gets
+ * acknowledged by the peer after the fifth attempt, the status
+ * information should then contain
+ *   { 3, 2 }, { 2, 2 }, { 1, 1 }, { -1, 0 } ...
+ * since it was transmitted twice at rate 3, twice at rate 2
+ * and once at rate 1 after which we received an acknowledgement.
+ */
+struct ieee80211_tx_rate {
+	s8 idx;
+	u8 count;
+	u8 flags;
+} __packed;
+
+/**
+ * struct ieee80211_tx_info - skb transmit information
+ *
+ * This structure is placed in skb->cb for three uses:
+ *  (1) mac80211 TX control - mac80211 tells the driver what to do
+ *  (2) driver internal use (if applicable)
+ *  (3) TX status information - driver tells mac80211 what happened
+ *
+ * The TX control's sta pointer is only valid during the ->tx call,
+ * it may be NULL.
+ *
+ * @flags: transmit info flags, defined above
+ * @band: the band to transmit on (use for checking for races)
+ * @antenna_sel_tx: antenna to use, 0 for automatic diversity
+ * @ack_frame_id: internal frame ID for TX status, used internally
+ * @control: union for control data
+ * @status: union for status data
+ * @driver_data: array of driver_data pointers
+ * @ampdu_ack_len: number of acked aggregated frames.
+ * 	relevant only if IEEE80211_TX_STAT_AMPDU was set.
+ * @ampdu_len: number of aggregated frames.
+ * 	relevant only if IEEE80211_TX_STAT_AMPDU was set.
+ * @ack_signal: signal strength of the ACK frame
+ */
+struct ieee80211_tx_info {
+	/* common information */
+	u32 flags;
+	u8 band;
+
+	u8 antenna_sel_tx;
+
+	u16 ack_frame_id;
+
+	union {
+		struct {
+			union {
+				/* rate control */
+				struct {
+					struct ieee80211_tx_rate rates[
+						IEEE80211_TX_MAX_RATES];
+					s8 rts_cts_rate_idx;
+				};
+				/* only needed before rate control */
+				unsigned long jiffies;
+			};
+			/* NB: vif can be NULL for injected frames */
+			struct ieee80211_vif *vif;
+			struct ieee80211_key_conf *hw_key;
+			struct ieee80211_sta *sta;
+		} control;
+		struct {
+			struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES];
+			u8 ampdu_ack_len;
+			int ack_signal;
+			u8 ampdu_len;
+			/* 15 bytes free */
+		} status;
+		struct {
+			struct ieee80211_tx_rate driver_rates[
+				IEEE80211_TX_MAX_RATES];
+			void *rate_driver_data[
+				IEEE80211_TX_INFO_RATE_DRIVER_DATA_SIZE / sizeof(void *)];
+		};
+		void *driver_data[
+			IEEE80211_TX_INFO_DRIVER_DATA_SIZE / sizeof(void *)];
+	};
+};
+
+/**
+ * struct ieee80211_sched_scan_ies - scheduled scan IEs
+ *
+ * This structure is used to pass the appropriate IEs to be used in scheduled
+ * scans for all bands.  It contains both the IEs passed from the userspace
+ * and the ones generated by mac80211.
+ *
+ * @ie: array with the IEs for each supported band
+ * @len: array with the total length of the IEs for each band
+ */
+struct ieee80211_sched_scan_ies {
+	u8 *ie[IEEE80211_NUM_BANDS];
+	size_t len[IEEE80211_NUM_BANDS];
+};
+
+static inline struct ieee80211_tx_info *IEEE80211_SKB_CB(struct sk_buff *skb)
+{
+	return (struct ieee80211_tx_info *)skb->cb;
+}
+
+static inline struct ieee80211_rx_status *IEEE80211_SKB_RXCB(struct sk_buff *skb)
+{
+	return (struct ieee80211_rx_status *)skb->cb;
+}
+
+/**
+ * ieee80211_tx_info_clear_status - clear TX status
+ *
+ * @info: The &struct ieee80211_tx_info to be cleared.
+ *
+ * When the driver passes an skb back to mac80211, it must report
+ * a number of things in TX status. This function clears everything
+ * in the TX status but the rate control information (it does clear
+ * the count since you need to fill that in anyway).
+ *
+ * NOTE: You can only use this function if you do NOT use
+ *	 info->driver_data! Use info->rate_driver_data
+ *	 instead if you need only the less space that allows.
+ */
+static inline void
+ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
+{
+	int i;
+
+	BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) !=
+		     offsetof(struct ieee80211_tx_info, control.rates));
+	BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) !=
+		     offsetof(struct ieee80211_tx_info, driver_rates));
+	BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) != 8);
+	/* clear the rate counts */
+	for (i = 0; i < IEEE80211_TX_MAX_RATES; i++)
+		info->status.rates[i].count = 0;
+
+	BUILD_BUG_ON(
+	    offsetof(struct ieee80211_tx_info, status.ampdu_ack_len) != 23);
+	memset(&info->status.ampdu_ack_len, 0,
+	       sizeof(struct ieee80211_tx_info) -
+	       offsetof(struct ieee80211_tx_info, status.ampdu_ack_len));
+}
+
+
+/**
+ * enum mac80211_rx_flags - receive flags
+ *
+ * These flags are used with the @flag member of &struct ieee80211_rx_status.
+ * @RX_FLAG_MMIC_ERROR: Michael MIC error was reported on this frame.
+ *	Use together with %RX_FLAG_MMIC_STRIPPED.
+ * @RX_FLAG_DECRYPTED: This frame was decrypted in hardware.
+ * @RX_FLAG_MMIC_STRIPPED: the Michael MIC is stripped off this frame,
+ *	verification has been done by the hardware.
+ * @RX_FLAG_IV_STRIPPED: The IV/ICV are stripped from this frame.
+ *	If this flag is set, the stack cannot do any replay detection
+ *	hence the driver or hardware will have to do that.
+ * @RX_FLAG_FAILED_FCS_CRC: Set this flag if the FCS check failed on
+ *	the frame.
+ * @RX_FLAG_FAILED_PLCP_CRC: Set this flag if the PCLP check failed on
+ *	the frame.
+ * @RX_FLAG_MACTIME_MPDU: The timestamp passed in the RX status (@mactime
+ *	field) is valid and contains the time the first symbol of the MPDU
+ *	was received. This is useful in monitor mode and for proper IBSS
+ *	merging.
+ * @RX_FLAG_SHORTPRE: Short preamble was used for this frame
+ * @RX_FLAG_HT: HT MCS was used and rate_idx is MCS index
+ * @RX_FLAG_40MHZ: HT40 (40 MHz) was used
+ * @RX_FLAG_SHORT_GI: Short guard interval was used
+ * @RX_FLAG_NO_SIGNAL_VAL: The signal strength value is not present.
+ *	Valid only for data frames (mainly A-MPDU)
+ */
+enum mac80211_rx_flags {
+	RX_FLAG_MMIC_ERROR	= 1<<0,
+	RX_FLAG_DECRYPTED	= 1<<1,
+	RX_FLAG_MMIC_STRIPPED	= 1<<3,
+	RX_FLAG_IV_STRIPPED	= 1<<4,
+	RX_FLAG_FAILED_FCS_CRC	= 1<<5,
+	RX_FLAG_FAILED_PLCP_CRC = 1<<6,
+	RX_FLAG_MACTIME_MPDU	= 1<<7,
+	RX_FLAG_SHORTPRE	= 1<<8,
+	RX_FLAG_HT		= 1<<9,
+	RX_FLAG_40MHZ		= 1<<10,
+	RX_FLAG_SHORT_GI	= 1<<11,
+	RX_FLAG_NO_SIGNAL_VAL	= 1<<12,
+};
+
+/**
+ * struct ieee80211_rx_status - receive status
+ *
+ * The low-level driver should provide this information (the subset
+ * supported by hardware) to the 802.11 code with each received
+ * frame, in the skb's control buffer (cb).
+ *
+ * @mactime: value in microseconds of the 64-bit Time Synchronization Function
+ * 	(TSF) timer when the first data symbol (MPDU) arrived at the hardware.
+ * @band: the active band when this frame was received
+ * @freq: frequency the radio was tuned to when receiving this frame, in MHz
+ * @signal: signal strength when receiving this frame, either in dBm, in dB or
+ *	unspecified depending on the hardware capabilities flags
+ *	@IEEE80211_HW_SIGNAL_*
+ * @antenna: antenna used
+ * @rate_idx: index of data rate into band's supported rates or MCS index if
+ *	HT rates are use (RX_FLAG_HT)
+ * @flag: %RX_FLAG_*
+ * @rx_flags: internal RX flags for mac80211
+ */
+struct ieee80211_rx_status {
+	u64 mactime;
+	enum ieee80211_band band;
+	int freq;
+	int signal;
+	int antenna;
+	int rate_idx;
+	int flag;
+	unsigned int rx_flags;
+};
+
+/**
+ * enum ieee80211_conf_flags - configuration flags
+ *
+ * Flags to define PHY configuration options
+ *
+ * @IEEE80211_CONF_MONITOR: there's a monitor interface present -- use this
+ *	to determine for example whether to calculate timestamps for packets
+ *	or not, do not use instead of filter flags!
+ * @IEEE80211_CONF_PS: Enable 802.11 power save mode (managed mode only).
+ *	This is the power save mode defined by IEEE 802.11-2007 section 11.2,
+ *	meaning that the hardware still wakes up for beacons, is able to
+ *	transmit frames and receive the possible acknowledgment frames.
+ *	Not to be confused with hardware specific wakeup/sleep states,
+ *	driver is responsible for that. See the section "Powersave support"
+ *	for more.
+ * @IEEE80211_CONF_IDLE: The device is running, but idle; if the flag is set
+ *	the driver should be prepared to handle configuration requests but
+ *	may turn the device off as much as possible. Typically, this flag will
+ *	be set when an interface is set UP but not associated or scanning, but
+ *	it can also be unset in that case when monitor interfaces are active.
+ * @IEEE80211_CONF_OFFCHANNEL: The device is currently not on its main
+ *	operating channel.
+ */
+enum ieee80211_conf_flags {
+	IEEE80211_CONF_MONITOR		= (1<<0),
+	IEEE80211_CONF_PS		= (1<<1),
+	IEEE80211_CONF_IDLE		= (1<<2),
+	IEEE80211_CONF_OFFCHANNEL	= (1<<3),
+};
+
+
+/**
+ * enum ieee80211_conf_changed - denotes which configuration changed
+ *
+ * @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed
+ * @IEEE80211_CONF_CHANGE_MONITOR: the monitor flag changed
+ * @IEEE80211_CONF_CHANGE_PS: the PS flag or dynamic PS timeout changed
+ * @IEEE80211_CONF_CHANGE_POWER: the TX power changed
+ * @IEEE80211_CONF_CHANGE_CHANNEL: the channel/channel_type changed
+ * @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed
+ * @IEEE80211_CONF_CHANGE_IDLE: Idle flag changed
+ * @IEEE80211_CONF_CHANGE_SMPS: Spatial multiplexing powersave mode changed
+ */
+enum ieee80211_conf_changed {
+	IEEE80211_CONF_CHANGE_SMPS		= BIT(1),
+	IEEE80211_CONF_CHANGE_LISTEN_INTERVAL	= BIT(2),
+	IEEE80211_CONF_CHANGE_MONITOR		= BIT(3),
+	IEEE80211_CONF_CHANGE_PS		= BIT(4),
+	IEEE80211_CONF_CHANGE_POWER		= BIT(5),
+	IEEE80211_CONF_CHANGE_CHANNEL		= BIT(6),
+	IEEE80211_CONF_CHANGE_RETRY_LIMITS	= BIT(7),
+	IEEE80211_CONF_CHANGE_IDLE		= BIT(8),
+};
+
+/**
+ * enum ieee80211_smps_mode - spatial multiplexing power save mode
+ *
+ * @IEEE80211_SMPS_AUTOMATIC: automatic
+ * @IEEE80211_SMPS_OFF: off
+ * @IEEE80211_SMPS_STATIC: static
+ * @IEEE80211_SMPS_DYNAMIC: dynamic
+ * @IEEE80211_SMPS_NUM_MODES: internal, don't use
+ */
+enum ieee80211_smps_mode {
+	IEEE80211_SMPS_AUTOMATIC,
+	IEEE80211_SMPS_OFF,
+	IEEE80211_SMPS_STATIC,
+	IEEE80211_SMPS_DYNAMIC,
+
+	/* keep last */
+	IEEE80211_SMPS_NUM_MODES,
+};
+
+/**
+ * struct ieee80211_conf - configuration of the device
+ *
+ * This struct indicates how the driver shall configure the hardware.
+ *
+ * @flags: configuration flags defined above
+ *
+ * @listen_interval: listen interval in units of beacon interval
+ * @max_sleep_period: the maximum number of beacon intervals to sleep for
+ *	before checking the beacon for a TIM bit (managed mode only); this
+ *	value will be only achievable between DTIM frames, the hardware
+ *	needs to check for the multicast traffic bit in DTIM beacons.
+ *	This variable is valid only when the CONF_PS flag is set.
+ * @ps_dtim_period: The DTIM period of the AP we're connected to, for use
+ *	in power saving. Power saving will not be enabled until a beacon
+ *	has been received and the DTIM period is known.
+ * @dynamic_ps_timeout: The dynamic powersave timeout (in ms), see the
+ *	powersave documentation below. This variable is valid only when
+ *	the CONF_PS flag is set.
+ *
+ * @power_level: requested transmit power (in dBm)
+ *
+ * @channel: the channel to tune to
+ * @channel_type: the channel (HT) type
+ *
+ * @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame
+ *    (a frame not RTS protected), called "dot11LongRetryLimit" in 802.11,
+ *    but actually means the number of transmissions not the number of retries
+ * @short_frame_max_tx_count: Maximum number of transmissions for a "short"
+ *    frame, called "dot11ShortRetryLimit" in 802.11, but actually means the
+ *    number of transmissions not the number of retries
+ *
+ * @smps_mode: spatial multiplexing powersave mode; note that
+ *	%IEEE80211_SMPS_STATIC is used when the device is not
+ *	configured for an HT channel
+ */
+struct ieee80211_conf {
+	u32 flags;
+	int power_level, dynamic_ps_timeout;
+	int max_sleep_period;
+
+	u16 listen_interval;
+	u8 ps_dtim_period;
+
+	u8 long_frame_max_tx_count, short_frame_max_tx_count;
+
+	struct ieee80211_channel *channel;
+	enum nl80211_channel_type channel_type;
+	enum ieee80211_smps_mode smps_mode;
+};
+
+/**
+ * struct ieee80211_channel_switch - holds the channel switch data
+ *
+ * The information provided in this structure is required for channel switch
+ * operation.
+ *
+ * @timestamp: value in microseconds of the 64-bit Time Synchronization
+ *	Function (TSF) timer when the frame containing the channel switch
+ *	announcement was received. This is simply the rx.mactime parameter
+ *	the driver passed into mac80211.
+ * @block_tx: Indicates whether transmission must be blocked before the
+ *	scheduled channel switch, as indicated by the AP.
+ * @channel: the new channel to switch to
+ * @count: the number of TBTT's until the channel switch event
+ */
+struct ieee80211_channel_switch {
+	u64 timestamp;
+	bool block_tx;
+	struct ieee80211_channel *channel;
+	u8 count;
+};
+
+/**
+ * enum ieee80211_vif_flags - virtual interface flags
+ *
+ * @IEEE80211_VIF_BEACON_FILTER: the device performs beacon filtering
+ *	on this virtual interface to avoid unnecessary CPU wakeups
+ * @IEEE80211_VIF_SUPPORTS_CQM_RSSI: the device can do connection quality
+ *	monitoring on this virtual interface -- i.e. it can monitor
+ *	connection quality related parameters, such as the RSSI level and
+ *	provide notifications if configured trigger levels are reached.
+ */
+enum ieee80211_vif_flags {
+	IEEE80211_VIF_BEACON_FILTER		= BIT(0),
+	IEEE80211_VIF_SUPPORTS_CQM_RSSI		= BIT(1),
+};
+
+/**
+ * struct ieee80211_vif - per-interface data
+ *
+ * Data in this structure is continually present for driver
+ * use during the life of a virtual interface.
+ *
+ * @type: type of this virtual interface
+ * @bss_conf: BSS configuration for this interface, either our own
+ *	or the BSS we're associated to
+ * @addr: address of this interface
+ * @p2p: indicates whether this AP or STA interface is a p2p
+ *	interface, i.e. a GO or p2p-sta respectively
+ * @driver_flags: flags/capabilities the driver has for this interface,
+ *	these need to be set (or cleared) when the interface is added
+ *	or, if supported by the driver, the interface type is changed
+ *	at runtime, mac80211 will never touch this field
+ * @drv_priv: data area for driver use, will always be aligned to
+ *	sizeof(void *).
+ */
+struct ieee80211_vif {
+	enum nl80211_iftype type;
+	struct ieee80211_bss_conf bss_conf;
+	u8 addr[ETH_ALEN];
+	bool p2p;
+	u32 driver_flags;
+	/* must be last */
+	u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *))));
+};
+
+static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif)
+{
+#ifdef CONFIG_MAC80211_MESH
+	return vif->type == NL80211_IFTYPE_MESH_POINT;
+#endif
+	return false;
+}
+
+/**
+ * enum ieee80211_key_flags - key flags
+ *
+ * These flags are used for communication about keys between the driver
+ * and mac80211, with the @flags parameter of &struct ieee80211_key_conf.
+ *
+ * @IEEE80211_KEY_FLAG_WMM_STA: Set by mac80211, this flag indicates
+ *	that the STA this key will be used with could be using QoS.
+ * @IEEE80211_KEY_FLAG_GENERATE_IV: This flag should be set by the
+ *	driver to indicate that it requires IV generation for this
+ *	particular key.
+ * @IEEE80211_KEY_FLAG_GENERATE_MMIC: This flag should be set by
+ *	the driver for a TKIP key if it requires Michael MIC
+ *	generation in software.
+ * @IEEE80211_KEY_FLAG_PAIRWISE: Set by mac80211, this flag indicates
+ *	that the key is pairwise rather then a shared key.
+ * @IEEE80211_KEY_FLAG_SW_MGMT: This flag should be set by the driver for a
+ *	CCMP key if it requires CCMP encryption of management frames (MFP) to
+ *	be done in software.
+ * @IEEE80211_KEY_FLAG_PUT_IV_SPACE: This flag should be set by the driver
+ *	for a CCMP key if space should be prepared for the IV, but the IV
+ *	itself should not be generated. Do not set together with
+ *	@IEEE80211_KEY_FLAG_GENERATE_IV on the same key.
+ */
+enum ieee80211_key_flags {
+	IEEE80211_KEY_FLAG_WMM_STA	= 1<<0,
+	IEEE80211_KEY_FLAG_GENERATE_IV	= 1<<1,
+	IEEE80211_KEY_FLAG_GENERATE_MMIC= 1<<2,
+	IEEE80211_KEY_FLAG_PAIRWISE	= 1<<3,
+	IEEE80211_KEY_FLAG_SW_MGMT	= 1<<4,
+	IEEE80211_KEY_FLAG_PUT_IV_SPACE = 1<<5,
+};
+
+/**
+ * struct ieee80211_key_conf - key information
+ *
+ * This key information is given by mac80211 to the driver by
+ * the set_key() callback in &struct ieee80211_ops.
+ *
+ * @hw_key_idx: To be set by the driver, this is the key index the driver
+ *	wants to be given when a frame is transmitted and needs to be
+ *	encrypted in hardware.
+ * @cipher: The key's cipher suite selector.
+ * @flags: key flags, see &enum ieee80211_key_flags.
+ * @keyidx: the key index (0-3)
+ * @keylen: key material length
+ * @key: key material. For ALG_TKIP the key is encoded as a 256-bit (32 byte)
+ * 	data block:
+ * 	- Temporal Encryption Key (128 bits)
+ * 	- Temporal Authenticator Tx MIC Key (64 bits)
+ * 	- Temporal Authenticator Rx MIC Key (64 bits)
+ * @icv_len: The ICV length for this key type
+ * @iv_len: The IV length for this key type
+ */
+struct ieee80211_key_conf {
+	u32 cipher;
+	u8 icv_len;
+	u8 iv_len;
+	u8 hw_key_idx;
+	u8 flags;
+	s8 keyidx;
+	u8 keylen;
+	u8 key[0];
+};
+
+/**
+ * enum set_key_cmd - key command
+ *
+ * Used with the set_key() callback in &struct ieee80211_ops, this
+ * indicates whether a key is being removed or added.
+ *
+ * @SET_KEY: a key is set
+ * @DISABLE_KEY: a key must be disabled
+ */
+enum set_key_cmd {
+	SET_KEY, DISABLE_KEY,
+};
+
+/**
+ * enum ieee80211_sta_state - station state
+ *
+ * @IEEE80211_STA_NOTEXIST: station doesn't exist at all,
+ *	this is a special state for add/remove transitions
+ * @IEEE80211_STA_NONE: station exists without special state
+ * @IEEE80211_STA_AUTH: station is authenticated
+ * @IEEE80211_STA_ASSOC: station is associated
+ * @IEEE80211_STA_AUTHORIZED: station is authorized (802.1X)
+ */
+enum ieee80211_sta_state {
+	/* NOTE: These need to be ordered correctly! */
+	IEEE80211_STA_NOTEXIST,
+	IEEE80211_STA_NONE,
+	IEEE80211_STA_AUTH,
+	IEEE80211_STA_ASSOC,
+	IEEE80211_STA_AUTHORIZED,
+};
+
+/**
+ * struct ieee80211_sta - station table entry
+ *
+ * A station table entry represents a station we are possibly
+ * communicating with. Since stations are RCU-managed in
+ * mac80211, any ieee80211_sta pointer you get access to must
+ * either be protected by rcu_read_lock() explicitly or implicitly,
+ * or you must take good care to not use such a pointer after a
+ * call to your sta_remove callback that removed it.
+ *
+ * @addr: MAC address
+ * @aid: AID we assigned to the station if we're an AP
+ * @supp_rates: Bitmap of supported rates (per band)
+ * @ht_cap: HT capabilities of this STA; restricted to our own TX capabilities
+ * @wme: indicates whether the STA supports WME. Only valid during AP-mode.
+ * @drv_priv: data area for driver use, will always be aligned to
+ *	sizeof(void *), size is determined in hw information.
+ * @uapsd_queues: bitmap of queues configured for uapsd. Only valid
+ *	if wme is supported.
+ * @max_sp: max Service Period. Only valid if wme is supported.
+ */
+struct ieee80211_sta {
+	u32 supp_rates[IEEE80211_NUM_BANDS];
+	u8 addr[ETH_ALEN];
+	u16 aid;
+	struct ieee80211_sta_ht_cap ht_cap;
+	bool wme;
+	u8 uapsd_queues;
+	u8 max_sp;
+
+	/* must be last */
+	u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *))));
+};
+
+/**
+ * enum sta_notify_cmd - sta notify command
+ *
+ * Used with the sta_notify() callback in &struct ieee80211_ops, this
+ * indicates if an associated station made a power state transition.
+ *
+ * @STA_NOTIFY_SLEEP: a station is now sleeping
+ * @STA_NOTIFY_AWAKE: a sleeping station woke up
+ */
+enum sta_notify_cmd {
+	STA_NOTIFY_SLEEP, STA_NOTIFY_AWAKE,
+};
+
+/**
+ * enum ieee80211_hw_flags - hardware flags
+ *
+ * These flags are used to indicate hardware capabilities to
+ * the stack. Generally, flags here should have their meaning
+ * done in a way that the simplest hardware doesn't need setting
+ * any particular flags. There are some exceptions to this rule,
+ * however, so you are advised to review these flags carefully.
+ *
+ * @IEEE80211_HW_HAS_RATE_CONTROL:
+ *	The hardware or firmware includes rate control, and cannot be
+ *	controlled by the stack. As such, no rate control algorithm
+ *	should be instantiated, and the TX rate reported to userspace
+ *	will be taken from the TX status instead of the rate control
+ *	algorithm.
+ *	Note that this requires that the driver implement a number of
+ *	callbacks so it has the correct information, it needs to have
+ *	the @set_rts_threshold callback and must look at the BSS config
+ *	@use_cts_prot for G/N protection, @use_short_slot for slot
+ *	timing in 2.4 GHz and @use_short_preamble for preambles for
+ *	CCK frames.
+ *
+ * @IEEE80211_HW_RX_INCLUDES_FCS:
+ *	Indicates that received frames passed to the stack include
+ *	the FCS at the end.
+ *
+ * @IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING:
+ *	Some wireless LAN chipsets buffer broadcast/multicast frames
+ *	for power saving stations in the hardware/firmware and others
+ *	rely on the host system for such buffering. This option is used
+ *	to configure the IEEE 802.11 upper layer to buffer broadcast and
+ *	multicast frames when there are power saving stations so that
+ *	the driver can fetch them with ieee80211_get_buffered_bc().
+ *
+ * @IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE:
+ *	Hardware is not capable of short slot operation on the 2.4 GHz band.
+ *
+ * @IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE:
+ *	Hardware is not capable of receiving frames with short preamble on
+ *	the 2.4 GHz band.
+ *
+ * @IEEE80211_HW_SIGNAL_UNSPEC:
+ *	Hardware can provide signal values but we don't know its units. We
+ *	expect values between 0 and @max_signal.
+ *	If possible please provide dB or dBm instead.
+ *
+ * @IEEE80211_HW_SIGNAL_DBM:
+ *	Hardware gives signal values in dBm, decibel difference from
+ *	one milliwatt. This is the preferred method since it is standardized
+ *	between different devices. @max_signal does not need to be set.
+ *
+ * @IEEE80211_HW_SPECTRUM_MGMT:
+ * 	Hardware supports spectrum management defined in 802.11h
+ * 	Measurement, Channel Switch, Quieting, TPC
+ *
+ * @IEEE80211_HW_AMPDU_AGGREGATION:
+ *	Hardware supports 11n A-MPDU aggregation.
+ *
+ * @IEEE80211_HW_SUPPORTS_PS:
+ *	Hardware has power save support (i.e. can go to sleep).
+ *
+ * @IEEE80211_HW_PS_NULLFUNC_STACK:
+ *	Hardware requires nullfunc frame handling in stack, implies
+ *	stack support for dynamic PS.
+ *
+ * @IEEE80211_HW_SUPPORTS_DYNAMIC_PS:
+ *	Hardware has support for dynamic PS.
+ *
+ * @IEEE80211_HW_MFP_CAPABLE:
+ *	Hardware supports management frame protection (MFP, IEEE 802.11w).
+ *
+ * @IEEE80211_HW_SUPPORTS_STATIC_SMPS:
+ *	Hardware supports static spatial multiplexing powersave,
+ *	ie. can turn off all but one chain even on HT connections
+ *	that should be using more chains.
+ *
+ * @IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS:
+ *	Hardware supports dynamic spatial multiplexing powersave,
+ *	ie. can turn off all but one chain and then wake the rest
+ *	up as required after, for example, rts/cts handshake.
+ *
+ * @IEEE80211_HW_SUPPORTS_UAPSD:
+ *	Hardware supports Unscheduled Automatic Power Save Delivery
+ *	(U-APSD) in managed mode. The mode is configured with
+ *	conf_tx() operation.
+ *
+ * @IEEE80211_HW_REPORTS_TX_ACK_STATUS:
+ *	Hardware can provide ack status reports of Tx frames to
+ *	the stack.
+ *
+ * @IEEE80211_HW_CONNECTION_MONITOR:
+ *      The hardware performs its own connection monitoring, including
+ *      periodic keep-alives to the AP and probing the AP on beacon loss.
+ *      When this flag is set, signaling beacon-loss will cause an immediate
+ *      change to disassociated state.
+ *
+ * @IEEE80211_HW_NEED_DTIM_PERIOD:
+ *	This device needs to know the DTIM period for the BSS before
+ *	associating.
+ *
+ * @IEEE80211_HW_SUPPORTS_PER_STA_GTK: The device's crypto engine supports
+ *	per-station GTKs as used by IBSS RSN or during fast transition. If
+ *	the device doesn't support per-station GTKs, but can be asked not
+ *	to decrypt group addressed frames, then IBSS RSN support is still
+ *	possible but software crypto will be used. Advertise the wiphy flag
+ *	only in that case.
+ *
+ * @IEEE80211_HW_AP_LINK_PS: When operating in AP mode the device
+ *	autonomously manages the PS status of connected stations. When
+ *	this flag is set mac80211 will not trigger PS mode for connected
+ *	stations based on the PM bit of incoming frames.
+ *	Use ieee80211_start_ps()/ieee8021_end_ps() to manually configure
+ *	the PS mode of connected stations.
+ *
+ * @IEEE80211_HW_TX_AMPDU_SETUP_IN_HW: The device handles TX A-MPDU session
+ *	setup strictly in HW. mac80211 should not attempt to do this in
+ *	software.
+ *
+ * @IEEE80211_HW_SCAN_WHILE_IDLE: The device can do hw scan while
+ *	being idle (i.e. mac80211 doesn't have to go idle-off during the
+ *	the scan).
+ */
+enum ieee80211_hw_flags {
+	IEEE80211_HW_HAS_RATE_CONTROL			= 1<<0,
+	IEEE80211_HW_RX_INCLUDES_FCS			= 1<<1,
+	IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING	= 1<<2,
+	IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE		= 1<<3,
+	IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE	= 1<<4,
+	IEEE80211_HW_SIGNAL_UNSPEC			= 1<<5,
+	IEEE80211_HW_SIGNAL_DBM				= 1<<6,
+	IEEE80211_HW_NEED_DTIM_PERIOD			= 1<<7,
+	IEEE80211_HW_SPECTRUM_MGMT			= 1<<8,
+	IEEE80211_HW_AMPDU_AGGREGATION			= 1<<9,
+	IEEE80211_HW_SUPPORTS_PS			= 1<<10,
+	IEEE80211_HW_PS_NULLFUNC_STACK			= 1<<11,
+	IEEE80211_HW_SUPPORTS_DYNAMIC_PS		= 1<<12,
+	IEEE80211_HW_MFP_CAPABLE			= 1<<13,
+	/* reuse bit 14 */
+	IEEE80211_HW_SUPPORTS_STATIC_SMPS		= 1<<15,
+	IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS		= 1<<16,
+	IEEE80211_HW_SUPPORTS_UAPSD			= 1<<17,
+	IEEE80211_HW_REPORTS_TX_ACK_STATUS		= 1<<18,
+	IEEE80211_HW_CONNECTION_MONITOR			= 1<<19,
+	/* reuse bit 20 */
+	IEEE80211_HW_SUPPORTS_PER_STA_GTK		= 1<<21,
+	IEEE80211_HW_AP_LINK_PS				= 1<<22,
+	IEEE80211_HW_TX_AMPDU_SETUP_IN_HW		= 1<<23,
+	IEEE80211_HW_SCAN_WHILE_IDLE			= 1<<24,
+};
+
+/**
+ * struct ieee80211_hw - hardware information and state
+ *
+ * This structure contains the configuration and hardware
+ * information for an 802.11 PHY.
+ *
+ * @wiphy: This points to the &struct wiphy allocated for this
+ *	802.11 PHY. You must fill in the @perm_addr and @dev
+ *	members of this structure using SET_IEEE80211_DEV()
+ *	and SET_IEEE80211_PERM_ADDR(). Additionally, all supported
+ *	bands (with channels, bitrates) are registered here.
+ *
+ * @conf: &struct ieee80211_conf, device configuration, don't use.
+ *
+ * @priv: pointer to private area that was allocated for driver use
+ *	along with this structure.
+ *
+ * @flags: hardware flags, see &enum ieee80211_hw_flags.
+ *
+ * @extra_tx_headroom: headroom to reserve in each transmit skb
+ *	for use by the driver (e.g. for transmit headers.)
+ *
+ * @channel_change_time: time (in microseconds) it takes to change channels.
+ *
+ * @max_signal: Maximum value for signal (rssi) in RX information, used
+ *     only when @IEEE80211_HW_SIGNAL_UNSPEC or @IEEE80211_HW_SIGNAL_DB
+ *
+ * @max_listen_interval: max listen interval in units of beacon interval
+ *     that HW supports
+ *
+ * @queues: number of available hardware transmit queues for
+ *	data packets. WMM/QoS requires at least four, these
+ *	queues need to have configurable access parameters.
+ *
+ * @rate_control_algorithm: rate control algorithm for this hardware.
+ *	If unset (NULL), the default algorithm will be used. Must be
+ *	set before calling ieee80211_register_hw().
+ *
+ * @vif_data_size: size (in bytes) of the drv_priv data area
+ *	within &struct ieee80211_vif.
+ * @sta_data_size: size (in bytes) of the drv_priv data area
+ *	within &struct ieee80211_sta.
+ *
+ * @max_rates: maximum number of alternate rate retry stages the hw
+ *	can handle.
+ * @max_report_rates: maximum number of alternate rate retry stages
+ *	the hw can report back.
+ * @max_rate_tries: maximum number of tries for each stage
+ *
+ * @napi_weight: weight used for NAPI polling.  You must specify an
+ *	appropriate value here if a napi_poll operation is provided
+ *	by your driver.
+ *
+ * @max_rx_aggregation_subframes: maximum buffer size (number of
+ *	sub-frames) to be used for A-MPDU block ack receiver
+ *	aggregation.
+ *	This is only relevant if the device has restrictions on the
+ *	number of subframes, if it relies on mac80211 to do reordering
+ *	it shouldn't be set.
+ *
+ * @max_tx_aggregation_subframes: maximum number of subframes in an
+ *	aggregate an HT driver will transmit, used by the peer as a
+ *	hint to size its reorder buffer.
+ */
+struct ieee80211_hw {
+	struct ieee80211_conf conf;
+	struct wiphy *wiphy;
+	const char *rate_control_algorithm;
+	void *priv;
+	u32 flags;
+	unsigned int extra_tx_headroom;
+	int channel_change_time;
+	int vif_data_size;
+	int sta_data_size;
+	int napi_weight;
+	u16 queues;
+	u16 max_listen_interval;
+	s8 max_signal;
+	u8 max_rates;
+	u8 max_report_rates;
+	u8 max_rate_tries;
+	u8 max_rx_aggregation_subframes;
+	u8 max_tx_aggregation_subframes;
+};
+
+/**
+ * wiphy_to_ieee80211_hw - return a mac80211 driver hw struct from a wiphy
+ *
+ * @wiphy: the &struct wiphy which we want to query
+ *
+ * mac80211 drivers can use this to get to their respective
+ * &struct ieee80211_hw. Drivers wishing to get to their own private
+ * structure can then access it via hw->priv. Note that mac802111 drivers should
+ * not use wiphy_priv() to try to get their private driver structure as this
+ * is already used internally by mac80211.
+ */
+struct ieee80211_hw *wiphy_to_ieee80211_hw(struct wiphy *wiphy);
+
+/**
+ * SET_IEEE80211_DEV - set device for 802.11 hardware
+ *
+ * @hw: the &struct ieee80211_hw to set the device for
+ * @dev: the &struct device of this 802.11 device
+ */
+static inline void SET_IEEE80211_DEV(struct ieee80211_hw *hw, struct device *dev)
+{
+	set_wiphy_dev(hw->wiphy, dev);
+}
+
+/**
+ * SET_IEEE80211_PERM_ADDR - set the permanent MAC address for 802.11 hardware
+ *
+ * @hw: the &struct ieee80211_hw to set the MAC address for
+ * @addr: the address to set
+ */
+static inline void SET_IEEE80211_PERM_ADDR(struct ieee80211_hw *hw, u8 *addr)
+{
+	memcpy(hw->wiphy->perm_addr, addr, ETH_ALEN);
+}
+
+static inline struct ieee80211_rate *
+ieee80211_get_tx_rate(const struct ieee80211_hw *hw,
+		      const struct ieee80211_tx_info *c)
+{
+	if (WARN_ON_ONCE(c->control.rates[0].idx < 0))
+		return NULL;
+	return &hw->wiphy->bands[c->band]->bitrates[c->control.rates[0].idx];
+}
+
+static inline struct ieee80211_rate *
+ieee80211_get_rts_cts_rate(const struct ieee80211_hw *hw,
+			   const struct ieee80211_tx_info *c)
+{
+	if (c->control.rts_cts_rate_idx < 0)
+		return NULL;
+	return &hw->wiphy->bands[c->band]->bitrates[c->control.rts_cts_rate_idx];
+}
+
+static inline struct ieee80211_rate *
+ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
+			     const struct ieee80211_tx_info *c, int idx)
+{
+	if (c->control.rates[idx + 1].idx < 0)
+		return NULL;
+	return &hw->wiphy->bands[c->band]->bitrates[c->control.rates[idx + 1].idx];
+}
+
+/**
+ * ieee80211_free_txskb - free TX skb
+ * @hw: the hardware
+ * @skb: the skb
+ *
+ * Free a transmit skb. Use this funtion when some failure
+ * to transmit happened and thus status cannot be reported.
+ */
+void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
+
+/**
+ * DOC: Hardware crypto acceleration
+ *
+ * mac80211 is capable of taking advantage of many hardware
+ * acceleration designs for encryption and decryption operations.
+ *
+ * The set_key() callback in the &struct ieee80211_ops for a given
+ * device is called to enable hardware acceleration of encryption and
+ * decryption. The callback takes a @sta parameter that will be NULL
+ * for default keys or keys used for transmission only, or point to
+ * the station information for the peer for individual keys.
+ * Multiple transmission keys with the same key index may be used when
+ * VLANs are configured for an access point.
+ *
+ * When transmitting, the TX control data will use the @hw_key_idx
+ * selected by the driver by modifying the &struct ieee80211_key_conf
+ * pointed to by the @key parameter to the set_key() function.
+ *
+ * The set_key() call for the %SET_KEY command should return 0 if
+ * the key is now in use, -%EOPNOTSUPP or -%ENOSPC if it couldn't be
+ * added; if you return 0 then hw_key_idx must be assigned to the
+ * hardware key index, you are free to use the full u8 range.
+ *
+ * When the cmd is %DISABLE_KEY then it must succeed.
+ *
+ * Note that it is permissible to not decrypt a frame even if a key
+ * for it has been uploaded to hardware, the stack will not make any
+ * decision based on whether a key has been uploaded or not but rather
+ * based on the receive flags.
+ *
+ * The &struct ieee80211_key_conf structure pointed to by the @key
+ * parameter is guaranteed to be valid until another call to set_key()
+ * removes it, but it can only be used as a cookie to differentiate
+ * keys.
+ *
+ * In TKIP some HW need to be provided a phase 1 key, for RX decryption
+ * acceleration (i.e. iwlwifi). Those drivers should provide update_tkip_key
+ * handler.
+ * The update_tkip_key() call updates the driver with the new phase 1 key.
+ * This happens every time the iv16 wraps around (every 65536 packets). The
+ * set_key() call will happen only once for each key (unless the AP did
+ * rekeying), it will not include a valid phase 1 key. The valid phase 1 key is
+ * provided by update_tkip_key only. The trigger that makes mac80211 call this
+ * handler is software decryption with wrap around of iv16.
+ */
+
+/**
+ * DOC: Powersave support
+ *
+ * mac80211 has support for various powersave implementations.
+ *
+ * First, it can support hardware that handles all powersaving by itself,
+ * such hardware should simply set the %IEEE80211_HW_SUPPORTS_PS hardware
+ * flag. In that case, it will be told about the desired powersave mode
+ * with the %IEEE80211_CONF_PS flag depending on the association status.
+ * The hardware must take care of sending nullfunc frames when necessary,
+ * i.e. when entering and leaving powersave mode. The hardware is required
+ * to look at the AID in beacons and signal to the AP that it woke up when
+ * it finds traffic directed to it.
+ *
+ * %IEEE80211_CONF_PS flag enabled means that the powersave mode defined in
+ * IEEE 802.11-2007 section 11.2 is enabled. This is not to be confused
+ * with hardware wakeup and sleep states. Driver is responsible for waking
+ * up the hardware before issuing commands to the hardware and putting it
+ * back to sleep at appropriate times.
+ *
+ * When PS is enabled, hardware needs to wakeup for beacons and receive the
+ * buffered multicast/broadcast frames after the beacon. Also it must be
+ * possible to send frames and receive the acknowledment frame.
+ *
+ * Other hardware designs cannot send nullfunc frames by themselves and also
+ * need software support for parsing the TIM bitmap. This is also supported
+ * by mac80211 by combining the %IEEE80211_HW_SUPPORTS_PS and
+ * %IEEE80211_HW_PS_NULLFUNC_STACK flags. The hardware is of course still
+ * required to pass up beacons. The hardware is still required to handle
+ * waking up for multicast traffic; if it cannot the driver must handle that
+ * as best as it can, mac80211 is too slow to do that.
+ *
+ * Dynamic powersave is an extension to normal powersave in which the
+ * hardware stays awake for a user-specified period of time after sending a
+ * frame so that reply frames need not be buffered and therefore delayed to
+ * the next wakeup. It's compromise of getting good enough latency when
+ * there's data traffic and still saving significantly power in idle
+ * periods.
+ *
+ * Dynamic powersave is simply supported by mac80211 enabling and disabling
+ * PS based on traffic. Driver needs to only set %IEEE80211_HW_SUPPORTS_PS
+ * flag and mac80211 will handle everything automatically. Additionally,
+ * hardware having support for the dynamic PS feature may set the
+ * %IEEE80211_HW_SUPPORTS_DYNAMIC_PS flag to indicate that it can support
+ * dynamic PS mode itself. The driver needs to look at the
+ * @dynamic_ps_timeout hardware configuration value and use it that value
+ * whenever %IEEE80211_CONF_PS is set. In this case mac80211 will disable
+ * dynamic PS feature in stack and will just keep %IEEE80211_CONF_PS
+ * enabled whenever user has enabled powersave.
+ *
+ * Some hardware need to toggle a single shared antenna between WLAN and
+ * Bluetooth to facilitate co-existence. These types of hardware set
+ * limitations on the use of host controlled dynamic powersave whenever there
+ * is simultaneous WLAN and Bluetooth traffic. For these types of hardware, the
+ * driver may request temporarily going into full power save, in order to
+ * enable toggling the antenna between BT and WLAN. If the driver requests
+ * disabling dynamic powersave, the @dynamic_ps_timeout value will be
+ * temporarily set to zero until the driver re-enables dynamic powersave.
+ *
+ * Driver informs U-APSD client support by enabling
+ * %IEEE80211_HW_SUPPORTS_UAPSD flag. The mode is configured through the
+ * uapsd paramater in conf_tx() operation. Hardware needs to send the QoS
+ * Nullfunc frames and stay awake until the service period has ended. To
+ * utilize U-APSD, dynamic powersave is disabled for voip AC and all frames
+ * from that AC are transmitted with powersave enabled.
+ *
+ * Note: U-APSD client mode is not yet supported with
+ * %IEEE80211_HW_PS_NULLFUNC_STACK.
+ */
+
+/**
+ * DOC: Beacon filter support
+ *
+ * Some hardware have beacon filter support to reduce host cpu wakeups
+ * which will reduce system power consumption. It usually works so that
+ * the firmware creates a checksum of the beacon but omits all constantly
+ * changing elements (TSF, TIM etc). Whenever the checksum changes the
+ * beacon is forwarded to the host, otherwise it will be just dropped. That
+ * way the host will only receive beacons where some relevant information
+ * (for example ERP protection or WMM settings) have changed.
+ *
+ * Beacon filter support is advertised with the %IEEE80211_VIF_BEACON_FILTER
+ * interface capability. The driver needs to enable beacon filter support
+ * whenever power save is enabled, that is %IEEE80211_CONF_PS is set. When
+ * power save is enabled, the stack will not check for beacon loss and the
+ * driver needs to notify about loss of beacons with ieee80211_beacon_loss().
+ *
+ * The time (or number of beacons missed) until the firmware notifies the
+ * driver of a beacon loss event (which in turn causes the driver to call
+ * ieee80211_beacon_loss()) should be configurable and will be controlled
+ * by mac80211 and the roaming algorithm in the future.
+ *
+ * Since there may be constantly changing information elements that nothing
+ * in the software stack cares about, we will, in the future, have mac80211
+ * tell the driver which information elements are interesting in the sense
+ * that we want to see changes in them. This will include
+ *  - a list of information element IDs
+ *  - a list of OUIs for the vendor information element
+ *
+ * Ideally, the hardware would filter out any beacons without changes in the
+ * requested elements, but if it cannot support that it may, at the expense
+ * of some efficiency, filter out only a subset. For example, if the device
+ * doesn't support checking for OUIs it should pass up all changes in all
+ * vendor information elements.
+ *
+ * Note that change, for the sake of simplification, also includes information
+ * elements appearing or disappearing from the beacon.
+ *
+ * Some hardware supports an "ignore list" instead, just make sure nothing
+ * that was requested is on the ignore list, and include commonly changing
+ * information element IDs in the ignore list, for example 11 (BSS load) and
+ * the various vendor-assigned IEs with unknown contents (128, 129, 133-136,
+ * 149, 150, 155, 156, 173, 176, 178, 179, 219); for forward compatibility
+ * it could also include some currently unused IDs.
+ *
+ *
+ * In addition to these capabilities, hardware should support notifying the
+ * host of changes in the beacon RSSI. This is relevant to implement roaming
+ * when no traffic is flowing (when traffic is flowing we see the RSSI of
+ * the received data packets). This can consist in notifying the host when
+ * the RSSI changes significantly or when it drops below or rises above
+ * configurable thresholds. In the future these thresholds will also be
+ * configured by mac80211 (which gets them from userspace) to implement
+ * them as the roaming algorithm requires.
+ *
+ * If the hardware cannot implement this, the driver should ask it to
+ * periodically pass beacon frames to the host so that software can do the
+ * signal strength threshold checking.
+ */
+
+/**
+ * DOC: Spatial multiplexing power save
+ *
+ * SMPS (Spatial multiplexing power save) is a mechanism to conserve
+ * power in an 802.11n implementation. For details on the mechanism
+ * and rationale, please refer to 802.11 (as amended by 802.11n-2009)
+ * "11.2.3 SM power save".
+ *
+ * The mac80211 implementation is capable of sending action frames
+ * to update the AP about the station's SMPS mode, and will instruct
+ * the driver to enter the specific mode. It will also announce the
+ * requested SMPS mode during the association handshake. Hardware
+ * support for this feature is required, and can be indicated by
+ * hardware flags.
+ *
+ * The default mode will be "automatic", which nl80211/cfg80211
+ * defines to be dynamic SMPS in (regular) powersave, and SMPS
+ * turned off otherwise.
+ *
+ * To support this feature, the driver must set the appropriate
+ * hardware support flags, and handle the SMPS flag to the config()
+ * operation. It will then with this mechanism be instructed to
+ * enter the requested SMPS mode while associated to an HT AP.
+ */
+
+/**
+ * DOC: Frame filtering
+ *
+ * mac80211 requires to see many management frames for proper
+ * operation, and users may want to see many more frames when
+ * in monitor mode. However, for best CPU usage and power consumption,
+ * having as few frames as possible percolate through the stack is
+ * desirable. Hence, the hardware should filter as much as possible.
+ *
+ * To achieve this, mac80211 uses filter flags (see below) to tell
+ * the driver's configure_filter() function which frames should be
+ * passed to mac80211 and which should be filtered out.
+ *
+ * Before configure_filter() is invoked, the prepare_multicast()
+ * callback is invoked with the parameters @mc_count and @mc_list
+ * for the combined multicast address list of all virtual interfaces.
+ * It's use is optional, and it returns a u64 that is passed to
+ * configure_filter(). Additionally, configure_filter() has the
+ * arguments @changed_flags telling which flags were changed and
+ * @total_flags with the new flag states.
+ *
+ * If your device has no multicast address filters your driver will
+ * need to check both the %FIF_ALLMULTI flag and the @mc_count
+ * parameter to see whether multicast frames should be accepted
+ * or dropped.
+ *
+ * All unsupported flags in @total_flags must be cleared.
+ * Hardware does not support a flag if it is incapable of _passing_
+ * the frame to the stack. Otherwise the driver must ignore
+ * the flag, but not clear it.
+ * You must _only_ clear the flag (announce no support for the
+ * flag to mac80211) if you are not able to pass the packet type
+ * to the stack (so the hardware always filters it).
+ * So for example, you should clear @FIF_CONTROL, if your hardware
+ * always filters control frames. If your hardware always passes
+ * control frames to the kernel and is incapable of filtering them,
+ * you do _not_ clear the @FIF_CONTROL flag.
+ * This rule applies to all other FIF flags as well.
+ */
+
+/**
+ * DOC: AP support for powersaving clients
+ *
+ * In order to implement AP and P2P GO modes, mac80211 has support for
+ * client powersaving, both "legacy" PS (PS-Poll/null data) and uAPSD.
+ * There currently is no support for sAPSD.
+ *
+ * There is one assumption that mac80211 makes, namely that a client
+ * will not poll with PS-Poll and trigger with uAPSD at the same time.
+ * Both are supported, and both can be used by the same client, but
+ * they can't be used concurrently by the same client. This simplifies
+ * the driver code.
+ *
+ * The first thing to keep in mind is that there is a flag for complete
+ * driver implementation: %IEEE80211_HW_AP_LINK_PS. If this flag is set,
+ * mac80211 expects the driver to handle most of the state machine for
+ * powersaving clients and will ignore the PM bit in incoming frames.
+ * Drivers then use ieee80211_sta_ps_transition() to inform mac80211 of
+ * stations' powersave transitions. In this mode, mac80211 also doesn't
+ * handle PS-Poll/uAPSD.
+ *
+ * In the mode without %IEEE80211_HW_AP_LINK_PS, mac80211 will check the
+ * PM bit in incoming frames for client powersave transitions. When a
+ * station goes to sleep, we will stop transmitting to it. There is,
+ * however, a race condition: a station might go to sleep while there is
+ * data buffered on hardware queues. If the device has support for this
+ * it will reject frames, and the driver should give the frames back to
+ * mac80211 with the %IEEE80211_TX_STAT_TX_FILTERED flag set which will
+ * cause mac80211 to retry the frame when the station wakes up. The
+ * driver is also notified of powersave transitions by calling its
+ * @sta_notify callback.
+ *
+ * When the station is asleep, it has three choices: it can wake up,
+ * it can PS-Poll, or it can possibly start a uAPSD service period.
+ * Waking up is implemented by simply transmitting all buffered (and
+ * filtered) frames to the station. This is the easiest case. When
+ * the station sends a PS-Poll or a uAPSD trigger frame, mac80211
+ * will inform the driver of this with the @allow_buffered_frames
+ * callback; this callback is optional. mac80211 will then transmit
+ * the frames as usual and set the %IEEE80211_TX_CTL_NO_PS_BUFFER
+ * on each frame. The last frame in the service period (or the only
+ * response to a PS-Poll) also has %IEEE80211_TX_STATUS_EOSP set to
+ * indicate that it ends the service period; as this frame must have
+ * TX status report it also sets %IEEE80211_TX_CTL_REQ_TX_STATUS.
+ * When TX status is reported for this frame, the service period is
+ * marked has having ended and a new one can be started by the peer.
+ *
+ * Additionally, non-bufferable MMPDUs can also be transmitted by
+ * mac80211 with the %IEEE80211_TX_CTL_NO_PS_BUFFER set in them.
+ *
+ * Another race condition can happen on some devices like iwlwifi
+ * when there are frames queued for the station and it wakes up
+ * or polls; the frames that are already queued could end up being
+ * transmitted first instead, causing reordering and/or wrong
+ * processing of the EOSP. The cause is that allowing frames to be
+ * transmitted to a certain station is out-of-band communication to
+ * the device. To allow this problem to be solved, the driver can
+ * call ieee80211_sta_block_awake() if frames are buffered when it
+ * is notified that the station went to sleep. When all these frames
+ * have been filtered (see above), it must call the function again
+ * to indicate that the station is no longer blocked.
+ *
+ * If the driver buffers frames in the driver for aggregation in any
+ * way, it must use the ieee80211_sta_set_buffered() call when it is
+ * notified of the station going to sleep to inform mac80211 of any
+ * TIDs that have frames buffered. Note that when a station wakes up
+ * this information is reset (hence the requirement to call it when
+ * informed of the station going to sleep). Then, when a service
+ * period starts for any reason, @release_buffered_frames is called
+ * with the number of frames to be released and which TIDs they are
+ * to come from. In this case, the driver is responsible for setting
+ * the EOSP (for uAPSD) and MORE_DATA bits in the released frames,
+ * to help the @more_data paramter is passed to tell the driver if
+ * there is more data on other TIDs -- the TIDs to release frames
+ * from are ignored since mac80211 doesn't know how many frames the
+ * buffers for those TIDs contain.
+ *
+ * If the driver also implement GO mode, where absence periods may
+ * shorten service periods (or abort PS-Poll responses), it must
+ * filter those response frames except in the case of frames that
+ * are buffered in the driver -- those must remain buffered to avoid
+ * reordering. Because it is possible that no frames are released
+ * in this case, the driver must call ieee80211_sta_eosp_irqsafe()
+ * to indicate to mac80211 that the service period ended anyway.
+ *
+ * Finally, if frames from multiple TIDs are released from mac80211
+ * but the driver might reorder them, it must clear & set the flags
+ * appropriately (only the last frame may have %IEEE80211_TX_STATUS_EOSP)
+ * and also take care of the EOSP and MORE_DATA bits in the frame.
+ * The driver may also use ieee80211_sta_eosp_irqsafe() in this case.
+ */
+
+/**
+ * enum ieee80211_filter_flags - hardware filter flags
+ *
+ * These flags determine what the filter in hardware should be
+ * programmed to let through and what should not be passed to the
+ * stack. It is always safe to pass more frames than requested,
+ * but this has negative impact on power consumption.
+ *
+ * @FIF_PROMISC_IN_BSS: promiscuous mode within your BSS,
+ *	think of the BSS as your network segment and then this corresponds
+ *	to the regular ethernet device promiscuous mode.
+ *
+ * @FIF_ALLMULTI: pass all multicast frames, this is used if requested
+ *	by the user or if the hardware is not capable of filtering by
+ *	multicast address.
+ *
+ * @FIF_FCSFAIL: pass frames with failed FCS (but you need to set the
+ *	%RX_FLAG_FAILED_FCS_CRC for them)
+ *
+ * @FIF_PLCPFAIL: pass frames with failed PLCP CRC (but you need to set
+ *	the %RX_FLAG_FAILED_PLCP_CRC for them
+ *
+ * @FIF_BCN_PRBRESP_PROMISC: This flag is set during scanning to indicate
+ *	to the hardware that it should not filter beacons or probe responses
+ *	by BSSID. Filtering them can greatly reduce the amount of processing
+ *	mac80211 needs to do and the amount of CPU wakeups, so you should
+ *	honour this flag if possible.
+ *
+ * @FIF_CONTROL: pass control frames (except for PS Poll), if PROMISC_IN_BSS
+ * 	is not set then only those addressed to this station.
+ *
+ * @FIF_OTHER_BSS: pass frames destined to other BSSes
+ *
+ * @FIF_PSPOLL: pass PS Poll frames, if PROMISC_IN_BSS is not set then only
+ * 	those addressed to this station.
+ *
+ * @FIF_PROBE_REQ: pass probe request frames
+ */
+enum ieee80211_filter_flags {
+	FIF_PROMISC_IN_BSS	= 1<<0,
+	FIF_ALLMULTI		= 1<<1,
+	FIF_FCSFAIL		= 1<<2,
+	FIF_PLCPFAIL		= 1<<3,
+	FIF_BCN_PRBRESP_PROMISC	= 1<<4,
+	FIF_CONTROL		= 1<<5,
+	FIF_OTHER_BSS		= 1<<6,
+	FIF_PSPOLL		= 1<<7,
+	FIF_PROBE_REQ		= 1<<8,
+};
+
+/**
+ * enum ieee80211_ampdu_mlme_action - A-MPDU actions
+ *
+ * These flags are used with the ampdu_action() callback in
+ * &struct ieee80211_ops to indicate which action is needed.
+ *
+ * Note that drivers MUST be able to deal with a TX aggregation
+ * session being stopped even before they OK'ed starting it by
+ * calling ieee80211_start_tx_ba_cb_irqsafe, because the peer
+ * might receive the addBA frame and send a delBA right away!
+ *
+ * @IEEE80211_AMPDU_RX_START: start Rx aggregation
+ * @IEEE80211_AMPDU_RX_STOP: stop Rx aggregation
+ * @IEEE80211_AMPDU_TX_START: start Tx aggregation
+ * @IEEE80211_AMPDU_TX_STOP: stop Tx aggregation
+ * @IEEE80211_AMPDU_TX_OPERATIONAL: TX aggregation has become operational
+ */
+enum ieee80211_ampdu_mlme_action {
+	IEEE80211_AMPDU_RX_START,
+	IEEE80211_AMPDU_RX_STOP,
+	IEEE80211_AMPDU_TX_START,
+	IEEE80211_AMPDU_TX_STOP,
+	IEEE80211_AMPDU_TX_OPERATIONAL,
+};
+
+/**
+ * enum ieee80211_frame_release_type - frame release reason
+ * @IEEE80211_FRAME_RELEASE_PSPOLL: frame released for PS-Poll
+ * @IEEE80211_FRAME_RELEASE_UAPSD: frame(s) released due to
+ *	frame received on trigger-enabled AC
+ */
+enum ieee80211_frame_release_type {
+	IEEE80211_FRAME_RELEASE_PSPOLL,
+	IEEE80211_FRAME_RELEASE_UAPSD,
+};
+
+/**
+ * struct ieee80211_ops - callbacks from mac80211 to the driver
+ *
+ * This structure contains various callbacks that the driver may
+ * handle or, in some cases, must handle, for example to configure
+ * the hardware to a new channel or to transmit a frame.
+ *
+ * @tx: Handler that 802.11 module calls for each transmitted frame.
+ *	skb contains the buffer starting from the IEEE 802.11 header.
+ *	The low-level driver should send the frame out based on
+ *	configuration in the TX control data. This handler should,
+ *	preferably, never fail and stop queues appropriately.
+ *	This must be implemented if @tx_frags is not.
+ *	Must be atomic.
+ *
+ * @tx_frags: Called to transmit multiple fragments of a single MSDU.
+ *	This handler must consume all fragments, sending out some of
+ *	them only is useless and it can't ask for some of them to be
+ *	queued again. If the frame is not fragmented the queue has a
+ *	single SKB only. To avoid issues with the networking stack
+ *	when TX status is reported the frames should be removed from
+ *	the skb queue.
+ *	If this is used, the tx_info @vif and @sta pointers will be
+ *	invalid -- you must not use them in that case.
+ *	This must be implemented if @tx isn't.
+ *	Must be atomic.
+ *
+ * @start: Called before the first netdevice attached to the hardware
+ *	is enabled. This should turn on the hardware and must turn on
+ *	frame reception (for possibly enabled monitor interfaces.)
+ *	Returns negative error codes, these may be seen in userspace,
+ *	or zero.
+ *	When the device is started it should not have a MAC address
+ *	to avoid acknowledging frames before a non-monitor device
+ *	is added.
+ *	Must be implemented and can sleep.
+ *
+ * @stop: Called after last netdevice attached to the hardware
+ *	is disabled. This should turn off the hardware (at least
+ *	it must turn off frame reception.)
+ *	May be called right after add_interface if that rejects
+ *	an interface. If you added any work onto the mac80211 workqueue
+ *	you should ensure to cancel it on this callback.
+ *	Must be implemented and can sleep.
+ *
+ * @suspend: Suspend the device; mac80211 itself will quiesce before and
+ *	stop transmitting and doing any other configuration, and then
+ *	ask the device to suspend. This is only invoked when WoWLAN is
+ *	configured, otherwise the device is deconfigured completely and
+ *	reconfigured at resume time.
+ *	The driver may also impose special conditions under which it
+ *	wants to use the "normal" suspend (deconfigure), say if it only
+ *	supports WoWLAN when the device is associated. In this case, it
+ *	must return 1 from this function.
+ *
+ * @resume: If WoWLAN was configured, this indicates that mac80211 is
+ *	now resuming its operation, after this the device must be fully
+ *	functional again. If this returns an error, the only way out is
+ *	to also unregister the device. If it returns 1, then mac80211
+ *	will also go through the regular complete restart on resume.
+ *
+ * @add_interface: Called when a netdevice attached to the hardware is
+ *	enabled. Because it is not called for monitor mode devices, @start
+ *	and @stop must be implemented.
+ *	The driver should perform any initialization it needs before
+ *	the device can be enabled. The initial configuration for the
+ *	interface is given in the conf parameter.
+ *	The callback may refuse to add an interface by returning a
+ *	negative error code (which will be seen in userspace.)
+ *	Must be implemented and can sleep.
+ *
+ * @change_interface: Called when a netdevice changes type. This callback
+ *	is optional, but only if it is supported can interface types be
+ *	switched while the interface is UP. The callback may sleep.
+ *	Note that while an interface is being switched, it will not be
+ *	found by the interface iteration callbacks.
+ *
+ * @remove_interface: Notifies a driver that an interface is going down.
+ *	The @stop callback is called after this if it is the last interface
+ *	and no monitor interfaces are present.
+ *	When all interfaces are removed, the MAC address in the hardware
+ *	must be cleared so the device no longer acknowledges packets,
+ *	the mac_addr member of the conf structure is, however, set to the
+ *	MAC address of the device going away.
+ *	Hence, this callback must be implemented. It can sleep.
+ *
+ * @config: Handler for configuration requests. IEEE 802.11 code calls this
+ *	function to change hardware configuration, e.g., channel.
+ *	This function should never fail but returns a negative error code
+ *	if it does. The callback can sleep.
+ *
+ * @bss_info_changed: Handler for configuration requests related to BSS
+ *	parameters that may vary during BSS's lifespan, and may affect low
+ *	level driver (e.g. assoc/disassoc status, erp parameters).
+ *	This function should not be used if no BSS has been set, unless
+ *	for association indication. The @changed parameter indicates which
+ *	of the bss parameters has changed when a call is made. The callback
+ *	can sleep.
+ *
+ * @prepare_multicast: Prepare for multicast filter configuration.
+ *	This callback is optional, and its return value is passed
+ *	to configure_filter(). This callback must be atomic.
+ *
+ * @configure_filter: Configure the device's RX filter.
+ *	See the section "Frame filtering" for more information.
+ *	This callback must be implemented and can sleep.
+ *
+ * @set_tim: Set TIM bit. mac80211 calls this function when a TIM bit
+ * 	must be set or cleared for a given STA. Must be atomic.
+ *
+ * @set_key: See the section "Hardware crypto acceleration"
+ *	This callback is only called between add_interface and
+ *	remove_interface calls, i.e. while the given virtual interface
+ *	is enabled.
+ *	Returns a negative error code if the key can't be added.
+ *	The callback can sleep.
+ *
+ * @update_tkip_key: See the section "Hardware crypto acceleration"
+ * 	This callback will be called in the context of Rx. Called for drivers
+ * 	which set IEEE80211_KEY_FLAG_TKIP_REQ_RX_P1_KEY.
+ *	The callback must be atomic.
+ *
+ * @set_rekey_data: If the device supports GTK rekeying, for example while the
+ *	host is suspended, it can assign this callback to retrieve the data
+ *	necessary to do GTK rekeying, this is the KEK, KCK and replay counter.
+ *	After rekeying was done it should (for example during resume) notify
+ *	userspace of the new replay counter using ieee80211_gtk_rekey_notify().
+ *
+ * @hw_scan: Ask the hardware to service the scan request, no need to start
+ *	the scan state machine in stack. The scan must honour the channel
+ *	configuration done by the regulatory agent in the wiphy's
+ *	registered bands. The hardware (or the driver) needs to make sure
+ *	that power save is disabled.
+ *	The @req ie/ie_len members are rewritten by mac80211 to contain the
+ *	entire IEs after the SSID, so that drivers need not look at these
+ *	at all but just send them after the SSID -- mac80211 includes the
+ *	(extended) supported rates and HT information (where applicable).
+ *	When the scan finishes, ieee80211_scan_completed() must be called;
+ *	note that it also must be called when the scan cannot finish due to
+ *	any error unless this callback returned a negative error code.
+ *	The callback can sleep.
+ *
+ * @cancel_hw_scan: Ask the low-level tp cancel the active hw scan.
+ *	The driver should ask the hardware to cancel the scan (if possible),
+ *	but the scan will be completed only after the driver will call
+ *	ieee80211_scan_completed().
+ *	This callback is needed for wowlan, to prevent enqueueing a new
+ *	scan_work after the low-level driver was already suspended.
+ *	The callback can sleep.
+ *
+ * @sched_scan_start: Ask the hardware to start scanning repeatedly at
+ *	specific intervals.  The driver must call the
+ *	ieee80211_sched_scan_results() function whenever it finds results.
+ *	This process will continue until sched_scan_stop is called.
+ *
+ * @sched_scan_stop: Tell the hardware to stop an ongoing scheduled scan.
+ *
+ * @sw_scan_start: Notifier function that is called just before a software scan
+ *	is started. Can be NULL, if the driver doesn't need this notification.
+ *	The callback can sleep.
+ *
+ * @sw_scan_complete: Notifier function that is called just after a
+ *	software scan finished. Can be NULL, if the driver doesn't need
+ *	this notification.
+ *	The callback can sleep.
+ *
+ * @get_stats: Return low-level statistics.
+ * 	Returns zero if statistics are available.
+ *	The callback can sleep.
+ *
+ * @get_tkip_seq: If your device implements TKIP encryption in hardware this
+ *	callback should be provided to read the TKIP transmit IVs (both IV32
+ *	and IV16) for the given key from hardware.
+ *	The callback must be atomic.
+ *
+ * @set_frag_threshold: Configuration of fragmentation threshold. Assign this
+ *	if the device does fragmentation by itself; if this callback is
+ *	implemented then the stack will not do fragmentation.
+ *	The callback can sleep.
+ *
+ * @set_rts_threshold: Configuration of RTS threshold (if device needs it)
+ *	The callback can sleep.
+ *
+ * @sta_add: Notifies low level driver about addition of an associated station,
+ *	AP, IBSS/WDS/mesh peer etc. This callback can sleep.
+ *
+ * @sta_remove: Notifies low level driver about removal of an associated
+ *	station, AP, IBSS/WDS/mesh peer etc. This callback can sleep.
+ *
+ * @sta_notify: Notifies low level driver about power state transition of an
+ *	associated station, AP,  IBSS/WDS/mesh peer etc. For a VIF operating
+ *	in AP mode, this callback will not be called when the flag
+ *	%IEEE80211_HW_AP_LINK_PS is set. Must be atomic.
+ *
+ * @sta_state: Notifies low level driver about state transition of a
+ *	station (which can be the AP, a client, IBSS/WDS/mesh peer etc.)
+ *	This callback is mutually exclusive with @sta_add/@sta_remove.
+ *	It must not fail for down transitions but may fail for transitions
+ *	up the list of states.
+ *	The callback can sleep.
+ *
+ * @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max),
+ *	bursting) for a hardware TX queue.
+ *	Returns a negative error code on failure.
+ *	The callback can sleep.
+ *
+ * @get_tsf: Get the current TSF timer value from firmware/hardware. Currently,
+ *	this is only used for IBSS mode BSSID merging and debugging. Is not a
+ *	required function.
+ *	The callback can sleep.
+ *
+ * @set_tsf: Set the TSF timer to the specified value in the firmware/hardware.
+ *      Currently, this is only used for IBSS mode debugging. Is not a
+ *	required function.
+ *	The callback can sleep.
+ *
+ * @reset_tsf: Reset the TSF timer and allow firmware/hardware to synchronize
+ *	with other STAs in the IBSS. This is only used in IBSS mode. This
+ *	function is optional if the firmware/hardware takes full care of
+ *	TSF synchronization.
+ *	The callback can sleep.
+ *
+ * @tx_last_beacon: Determine whether the last IBSS beacon was sent by us.
+ *	This is needed only for IBSS mode and the result of this function is
+ *	used to determine whether to reply to Probe Requests.
+ *	Returns non-zero if this device sent the last beacon.
+ *	The callback can sleep.
+ *
+ * @ampdu_action: Perform a certain A-MPDU action
+ * 	The RA/TID combination determines the destination and TID we want
+ * 	the ampdu action to be performed for. The action is defined through
+ * 	ieee80211_ampdu_mlme_action. Starting sequence number (@ssn)
+ * 	is the first frame we expect to perform the action on. Notice
+ * 	that TX/RX_STOP can pass NULL for this parameter.
+ *	The @buf_size parameter is only valid when the action is set to
+ *	%IEEE80211_AMPDU_TX_OPERATIONAL and indicates the peer's reorder
+ *	buffer size (number of subframes) for this session -- the driver
+ *	may neither send aggregates containing more subframes than this
+ *	nor send aggregates in a way that lost frames would exceed the
+ *	buffer size. If just limiting the aggregate size, this would be
+ *	possible with a buf_size of 8:
+ *	 - TX: 1.....7
+ *	 - RX:  2....7 (lost frame #1)
+ *	 - TX:        8..1...
+ *	which is invalid since #1 was now re-transmitted well past the
+ *	buffer size of 8. Correct ways to retransmit #1 would be:
+ *	 - TX:       1 or 18 or 81
+ *	Even "189" would be wrong since 1 could be lost again.
+ *
+ *	Returns a negative error code on failure.
+ *	The callback can sleep.
+ *
+ * @get_survey: Return per-channel survey information
+ *
+ * @rfkill_poll: Poll rfkill hardware state. If you need this, you also
+ *	need to set wiphy->rfkill_poll to %true before registration,
+ *	and need to call wiphy_rfkill_set_hw_state() in the callback.
+ *	The callback can sleep.
+ *
+ * @set_coverage_class: Set slot time for given coverage class as specified
+ *	in IEEE 802.11-2007 section 17.3.8.6 and modify ACK timeout
+ *	accordingly. This callback is not required and may sleep.
+ *
+ * @testmode_cmd: Implement a cfg80211 test mode command.
+ *	The callback can sleep.
+ * @testmode_dump: Implement a cfg80211 test mode dump. The callback can sleep.
+ *
+ * @flush: Flush all pending frames from the hardware queue, making sure
+ *	that the hardware queues are empty. If the parameter @drop is set
+ *	to %true, pending frames may be dropped. The callback can sleep.
+ *
+ * @channel_switch: Drivers that need (or want) to offload the channel
+ *	switch operation for CSAs received from the AP may implement this
+ *	callback. They must then call ieee80211_chswitch_done() to indicate
+ *	completion of the channel switch.
+ *
+ * @napi_poll: Poll Rx queue for incoming data frames.
+ *
+ * @set_antenna: Set antenna configuration (tx_ant, rx_ant) on the device.
+ *	Parameters are bitmaps of allowed antennas to use for TX/RX. Drivers may
+ *	reject TX/RX mask combinations they cannot support by returning -EINVAL
+ *	(also see nl80211.h @NL80211_ATTR_WIPHY_ANTENNA_TX).
+ *
+ * @get_antenna: Get current antenna configuration from device (tx_ant, rx_ant).
+ *
+ * @remain_on_channel: Starts an off-channel period on the given channel, must
+ *	call back to ieee80211_ready_on_channel() when on that channel. Note
+ *	that normal channel traffic is not stopped as this is intended for hw
+ *	offload. Frames to transmit on the off-channel channel are transmitted
+ *	normally except for the %IEEE80211_TX_CTL_TX_OFFCHAN flag. When the
+ *	duration (which will always be non-zero) expires, the driver must call
+ *	ieee80211_remain_on_channel_expired(). This callback may sleep.
+ * @cancel_remain_on_channel: Requests that an ongoing off-channel period is
+ *	aborted before it expires. This callback may sleep.
+ *
+ * @set_ringparam: Set tx and rx ring sizes.
+ *
+ * @get_ringparam: Get tx and rx ring current and maximum sizes.
+ *
+ * @tx_frames_pending: Check if there is any pending frame in the hardware
+ *	queues before entering power save.
+ *
+ * @set_bitrate_mask: Set a mask of rates to be used for rate control selection
+ *	when transmitting a frame. Currently only legacy rates are handled.
+ *	The callback can sleep.
+ * @rssi_callback: Notify driver when the average RSSI goes above/below
+ *	thresholds that were registered previously. The callback can sleep.
+ *
+ * @release_buffered_frames: Release buffered frames according to the given
+ *	parameters. In the case where the driver buffers some frames for
+ *	sleeping stations mac80211 will use this callback to tell the driver
+ *	to release some frames, either for PS-poll or uAPSD.
+ *	Note that if the @more_data paramter is %false the driver must check
+ *	if there are more frames on the given TIDs, and if there are more than
+ *	the frames being released then it must still set the more-data bit in
+ *	the frame. If the @more_data parameter is %true, then of course the
+ *	more-data bit must always be set.
+ *	The @tids parameter tells the driver which TIDs to release frames
+ *	from, for PS-poll it will always have only a single bit set.
+ *	In the case this is used for a PS-poll initiated release, the
+ *	@num_frames parameter will always be 1 so code can be shared. In
+ *	this case the driver must also set %IEEE80211_TX_STATUS_EOSP flag
+ *	on the TX status (and must report TX status) so that the PS-poll
+ *	period is properly ended. This is used to avoid sending multiple
+ *	responses for a retried PS-poll frame.
+ *	In the case this is used for uAPSD, the @num_frames parameter may be
+ *	bigger than one, but the driver may send fewer frames (it must send
+ *	at least one, however). In this case it is also responsible for
+ *	setting the EOSP flag in the QoS header of the frames. Also, when the
+ *	service period ends, the driver must set %IEEE80211_TX_STATUS_EOSP
+ *	on the last frame in the SP. Alternatively, it may call the function
+ *	ieee80211_sta_eosp_irqsafe() to inform mac80211 of the end of the SP.
+ *	This callback must be atomic.
+ * @allow_buffered_frames: Prepare device to allow the given number of frames
+ *	to go out to the given station. The frames will be sent by mac80211
+ *	via the usual TX path after this call. The TX information for frames
+ *	released will also have the %IEEE80211_TX_CTL_NO_PS_BUFFER flag set
+ *	and the last one will also have %IEEE80211_TX_STATUS_EOSP set. In case
+ *	frames from multiple TIDs are released and the driver might reorder
+ *	them between the TIDs, it must set the %IEEE80211_TX_STATUS_EOSP flag
+ *	on the last frame and clear it on all others and also handle the EOSP
+ *	bit in the QoS header correctly. Alternatively, it can also call the
+ *	ieee80211_sta_eosp_irqsafe() function.
+ *	The @tids parameter is a bitmap and tells the driver which TIDs the
+ *	frames will be on; it will at most have two bits set.
+ *	This callback must be atomic.
+ */
+struct ieee80211_ops {
+	void (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
+	void (*tx_frags)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			 struct ieee80211_sta *sta, struct sk_buff_head *skbs);
+	int (*start)(struct ieee80211_hw *hw);
+	void (*stop)(struct ieee80211_hw *hw);
+#ifdef CONFIG_PM
+	int (*suspend)(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan);
+	int (*resume)(struct ieee80211_hw *hw);
+#endif
+	int (*add_interface)(struct ieee80211_hw *hw,
+			     struct ieee80211_vif *vif);
+	int (*change_interface)(struct ieee80211_hw *hw,
+				struct ieee80211_vif *vif,
+				enum nl80211_iftype new_type, bool p2p);
+	void (*remove_interface)(struct ieee80211_hw *hw,
+				 struct ieee80211_vif *vif);
+	int (*config)(struct ieee80211_hw *hw, u32 changed);
+	void (*bss_info_changed)(struct ieee80211_hw *hw,
+				 struct ieee80211_vif *vif,
+				 struct ieee80211_bss_conf *info,
+				 u32 changed);
+
+	u64 (*prepare_multicast)(struct ieee80211_hw *hw,
+				 struct netdev_hw_addr_list *mc_list);
+	void (*configure_filter)(struct ieee80211_hw *hw,
+				 unsigned int changed_flags,
+				 unsigned int *total_flags,
+				 u64 multicast);
+	int (*set_tim)(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
+		       bool set);
+	int (*set_key)(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+		       struct ieee80211_vif *vif, struct ieee80211_sta *sta,
+		       struct ieee80211_key_conf *key);
+	void (*update_tkip_key)(struct ieee80211_hw *hw,
+				struct ieee80211_vif *vif,
+				struct ieee80211_key_conf *conf,
+				struct ieee80211_sta *sta,
+				u32 iv32, u16 *phase1key);
+	void (*set_rekey_data)(struct ieee80211_hw *hw,
+			       struct ieee80211_vif *vif,
+			       struct cfg80211_gtk_rekey_data *data);
+	int (*hw_scan)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+		       struct cfg80211_scan_request *req);
+	void (*cancel_hw_scan)(struct ieee80211_hw *hw,
+			       struct ieee80211_vif *vif);
+	int (*sched_scan_start)(struct ieee80211_hw *hw,
+				struct ieee80211_vif *vif,
+				struct cfg80211_sched_scan_request *req,
+				struct ieee80211_sched_scan_ies *ies);
+	void (*sched_scan_stop)(struct ieee80211_hw *hw,
+			       struct ieee80211_vif *vif);
+	void (*sw_scan_start)(struct ieee80211_hw *hw);
+	void (*sw_scan_complete)(struct ieee80211_hw *hw);
+	int (*get_stats)(struct ieee80211_hw *hw,
+			 struct ieee80211_low_level_stats *stats);
+	void (*get_tkip_seq)(struct ieee80211_hw *hw, u8 hw_key_idx,
+			     u32 *iv32, u16 *iv16);
+	int (*set_frag_threshold)(struct ieee80211_hw *hw, u32 value);
+	int (*set_rts_threshold)(struct ieee80211_hw *hw, u32 value);
+	int (*sta_add)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+		       struct ieee80211_sta *sta);
+	int (*sta_remove)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			  struct ieee80211_sta *sta);
+	void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			enum sta_notify_cmd, struct ieee80211_sta *sta);
+	int (*sta_state)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			 struct ieee80211_sta *sta,
+			 enum ieee80211_sta_state old_state,
+			 enum ieee80211_sta_state new_state);
+	int (*conf_tx)(struct ieee80211_hw *hw,
+		       struct ieee80211_vif *vif, u16 queue,
+		       const struct ieee80211_tx_queue_params *params);
+	u64 (*get_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
+	void (*set_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			u64 tsf);
+	void (*reset_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
+	int (*tx_last_beacon)(struct ieee80211_hw *hw);
+	int (*ampdu_action)(struct ieee80211_hw *hw,
+			    struct ieee80211_vif *vif,
+			    enum ieee80211_ampdu_mlme_action action,
+			    struct ieee80211_sta *sta, u16 tid, u16 *ssn,
+			    u8 buf_size);
+	int (*get_survey)(struct ieee80211_hw *hw, int idx,
+		struct survey_info *survey);
+	void (*rfkill_poll)(struct ieee80211_hw *hw);
+	void (*set_coverage_class)(struct ieee80211_hw *hw, u8 coverage_class);
+#ifdef CONFIG_NL80211_TESTMODE
+	int (*testmode_cmd)(struct ieee80211_hw *hw, void *data, int len);
+	int (*testmode_dump)(struct ieee80211_hw *hw, struct sk_buff *skb,
+			     struct netlink_callback *cb,
+			     void *data, int len);
+#endif
+	void (*flush)(struct ieee80211_hw *hw, bool drop);
+	void (*channel_switch)(struct ieee80211_hw *hw,
+			       struct ieee80211_channel_switch *ch_switch);
+	int (*napi_poll)(struct ieee80211_hw *hw, int budget);
+	int (*set_antenna)(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant);
+	int (*get_antenna)(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant);
+
+	int (*remain_on_channel)(struct ieee80211_hw *hw,
+				 struct ieee80211_channel *chan,
+				 enum nl80211_channel_type channel_type,
+				 int duration);
+	int (*cancel_remain_on_channel)(struct ieee80211_hw *hw);
+	int (*set_ringparam)(struct ieee80211_hw *hw, u32 tx, u32 rx);
+	void (*get_ringparam)(struct ieee80211_hw *hw,
+			      u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max);
+	bool (*tx_frames_pending)(struct ieee80211_hw *hw);
+	int (*set_bitrate_mask)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+				const struct cfg80211_bitrate_mask *mask);
+	void (*rssi_callback)(struct ieee80211_hw *hw,
+			      enum ieee80211_rssi_event rssi_event);
+
+	void (*allow_buffered_frames)(struct ieee80211_hw *hw,
+				      struct ieee80211_sta *sta,
+				      u16 tids, int num_frames,
+				      enum ieee80211_frame_release_type reason,
+				      bool more_data);
+	void (*release_buffered_frames)(struct ieee80211_hw *hw,
+					struct ieee80211_sta *sta,
+					u16 tids, int num_frames,
+					enum ieee80211_frame_release_type reason,
+					bool more_data);
+};
+
+/**
+ * ieee80211_alloc_hw -  Allocate a new hardware device
+ *
+ * This must be called once for each hardware device. The returned pointer
+ * must be used to refer to this device when calling other functions.
+ * mac80211 allocates a private data area for the driver pointed to by
+ * @priv in &struct ieee80211_hw, the size of this area is given as
+ * @priv_data_len.
+ *
+ * @priv_data_len: length of private data
+ * @ops: callbacks for this device
+ */
+struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
+					const struct ieee80211_ops *ops);
+
+/**
+ * ieee80211_register_hw - Register hardware device
+ *
+ * You must call this function before any other functions in
+ * mac80211. Note that before a hardware can be registered, you
+ * need to fill the contained wiphy's information.
+ *
+ * @hw: the device to register as returned by ieee80211_alloc_hw()
+ */
+int ieee80211_register_hw(struct ieee80211_hw *hw);
+
+/**
+ * struct ieee80211_tpt_blink - throughput blink description
+ * @throughput: throughput in Kbit/sec
+ * @blink_time: blink time in milliseconds
+ *	(full cycle, ie. one off + one on period)
+ */
+struct ieee80211_tpt_blink {
+	int throughput;
+	int blink_time;
+};
+
+/**
+ * enum ieee80211_tpt_led_trigger_flags - throughput trigger flags
+ * @IEEE80211_TPT_LEDTRIG_FL_RADIO: enable blinking with radio
+ * @IEEE80211_TPT_LEDTRIG_FL_WORK: enable blinking when working
+ * @IEEE80211_TPT_LEDTRIG_FL_CONNECTED: enable blinking when at least one
+ *	interface is connected in some way, including being an AP
+ */
+enum ieee80211_tpt_led_trigger_flags {
+	IEEE80211_TPT_LEDTRIG_FL_RADIO		= BIT(0),
+	IEEE80211_TPT_LEDTRIG_FL_WORK		= BIT(1),
+	IEEE80211_TPT_LEDTRIG_FL_CONNECTED	= BIT(2),
+};
+
+#ifdef CONFIG_MAC80211_LEDS
+extern char *__ieee80211_get_tx_led_name(struct ieee80211_hw *hw);
+extern char *__ieee80211_get_rx_led_name(struct ieee80211_hw *hw);
+extern char *__ieee80211_get_assoc_led_name(struct ieee80211_hw *hw);
+extern char *__ieee80211_get_radio_led_name(struct ieee80211_hw *hw);
+extern char *__ieee80211_create_tpt_led_trigger(
+				struct ieee80211_hw *hw, unsigned int flags,
+				const struct ieee80211_tpt_blink *blink_table,
+				unsigned int blink_table_len);
+#endif
+/**
+ * ieee80211_get_tx_led_name - get name of TX LED
+ *
+ * mac80211 creates a transmit LED trigger for each wireless hardware
+ * that can be used to drive LEDs if your driver registers a LED device.
+ * This function returns the name (or %NULL if not configured for LEDs)
+ * of the trigger so you can automatically link the LED device.
+ *
+ * @hw: the hardware to get the LED trigger name for
+ */
+static inline char *ieee80211_get_tx_led_name(struct ieee80211_hw *hw)
+{
+#ifdef CONFIG_MAC80211_LEDS
+	return __ieee80211_get_tx_led_name(hw);
+#else
+	return NULL;
+#endif
+}
+
+/**
+ * ieee80211_get_rx_led_name - get name of RX LED
+ *
+ * mac80211 creates a receive LED trigger for each wireless hardware
+ * that can be used to drive LEDs if your driver registers a LED device.
+ * This function returns the name (or %NULL if not configured for LEDs)
+ * of the trigger so you can automatically link the LED device.
+ *
+ * @hw: the hardware to get the LED trigger name for
+ */
+static inline char *ieee80211_get_rx_led_name(struct ieee80211_hw *hw)
+{
+#ifdef CONFIG_MAC80211_LEDS
+	return __ieee80211_get_rx_led_name(hw);
+#else
+	return NULL;
+#endif
+}
+
+/**
+ * ieee80211_get_assoc_led_name - get name of association LED
+ *
+ * mac80211 creates a association LED trigger for each wireless hardware
+ * that can be used to drive LEDs if your driver registers a LED device.
+ * This function returns the name (or %NULL if not configured for LEDs)
+ * of the trigger so you can automatically link the LED device.
+ *
+ * @hw: the hardware to get the LED trigger name for
+ */
+static inline char *ieee80211_get_assoc_led_name(struct ieee80211_hw *hw)
+{
+#ifdef CONFIG_MAC80211_LEDS
+	return __ieee80211_get_assoc_led_name(hw);
+#else
+	return NULL;
+#endif
+}
+
+/**
+ * ieee80211_get_radio_led_name - get name of radio LED
+ *
+ * mac80211 creates a radio change LED trigger for each wireless hardware
+ * that can be used to drive LEDs if your driver registers a LED device.
+ * This function returns the name (or %NULL if not configured for LEDs)
+ * of the trigger so you can automatically link the LED device.
+ *
+ * @hw: the hardware to get the LED trigger name for
+ */
+static inline char *ieee80211_get_radio_led_name(struct ieee80211_hw *hw)
+{
+#ifdef CONFIG_MAC80211_LEDS
+	return __ieee80211_get_radio_led_name(hw);
+#else
+	return NULL;
+#endif
+}
+
+/**
+ * ieee80211_create_tpt_led_trigger - create throughput LED trigger
+ * @hw: the hardware to create the trigger for
+ * @flags: trigger flags, see &enum ieee80211_tpt_led_trigger_flags
+ * @blink_table: the blink table -- needs to be ordered by throughput
+ * @blink_table_len: size of the blink table
+ *
+ * This function returns %NULL (in case of error, or if no LED
+ * triggers are configured) or the name of the new trigger.
+ * This function must be called before ieee80211_register_hw().
+ */
+static inline char *
+ieee80211_create_tpt_led_trigger(struct ieee80211_hw *hw, unsigned int flags,
+				 const struct ieee80211_tpt_blink *blink_table,
+				 unsigned int blink_table_len)
+{
+#ifdef CONFIG_MAC80211_LEDS
+	return __ieee80211_create_tpt_led_trigger(hw, flags, blink_table,
+						  blink_table_len);
+#else
+	return NULL;
+#endif
+}
+
+/**
+ * ieee80211_unregister_hw - Unregister a hardware device
+ *
+ * This function instructs mac80211 to free allocated resources
+ * and unregister netdevices from the networking subsystem.
+ *
+ * @hw: the hardware to unregister
+ */
+void ieee80211_unregister_hw(struct ieee80211_hw *hw);
+
+/**
+ * ieee80211_free_hw - free hardware descriptor
+ *
+ * This function frees everything that was allocated, including the
+ * private data for the driver. You must call ieee80211_unregister_hw()
+ * before calling this function.
+ *
+ * @hw: the hardware to free
+ */
+void ieee80211_free_hw(struct ieee80211_hw *hw);
+
+/**
+ * ieee80211_restart_hw - restart hardware completely
+ *
+ * Call this function when the hardware was restarted for some reason
+ * (hardware error, ...) and the driver is unable to restore its state
+ * by itself. mac80211 assumes that at this point the driver/hardware
+ * is completely uninitialised and stopped, it starts the process by
+ * calling the ->start() operation. The driver will need to reset all
+ * internal state that it has prior to calling this function.
+ *
+ * @hw: the hardware to restart
+ */
+void ieee80211_restart_hw(struct ieee80211_hw *hw);
+
+/** ieee80211_napi_schedule - schedule NAPI poll
+ *
+ * Use this function to schedule NAPI polling on a device.
+ *
+ * @hw: the hardware to start polling
+ */
+void ieee80211_napi_schedule(struct ieee80211_hw *hw);
+
+/** ieee80211_napi_complete - complete NAPI polling
+ *
+ * Use this function to finish NAPI polling on a device.
+ *
+ * @hw: the hardware to stop polling
+ */
+void ieee80211_napi_complete(struct ieee80211_hw *hw);
+
+/**
+ * ieee80211_rx - receive frame
+ *
+ * Use this function to hand received frames to mac80211. The receive
+ * buffer in @skb must start with an IEEE 802.11 header. In case of a
+ * paged @skb is used, the driver is recommended to put the ieee80211
+ * header of the frame on the linear part of the @skb to avoid memory
+ * allocation and/or memcpy by the stack.
+ *
+ * This function may not be called in IRQ context. Calls to this function
+ * for a single hardware must be synchronized against each other. Calls to
+ * this function, ieee80211_rx_ni() and ieee80211_rx_irqsafe() may not be
+ * mixed for a single hardware.
+ *
+ * In process context use instead ieee80211_rx_ni().
+ *
+ * @hw: the hardware this frame came in on
+ * @skb: the buffer to receive, owned by mac80211 after this call
+ */
+void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb);
+
+/**
+ * ieee80211_rx_irqsafe - receive frame
+ *
+ * Like ieee80211_rx() but can be called in IRQ context
+ * (internally defers to a tasklet.)
+ *
+ * Calls to this function, ieee80211_rx() or ieee80211_rx_ni() may not
+ * be mixed for a single hardware.
+ *
+ * @hw: the hardware this frame came in on
+ * @skb: the buffer to receive, owned by mac80211 after this call
+ */
+void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, struct sk_buff *skb);
+
+/**
+ * ieee80211_rx_ni - receive frame (in process context)
+ *
+ * Like ieee80211_rx() but can be called in process context
+ * (internally disables bottom halves).
+ *
+ * Calls to this function, ieee80211_rx() and ieee80211_rx_irqsafe() may
+ * not be mixed for a single hardware.
+ *
+ * @hw: the hardware this frame came in on
+ * @skb: the buffer to receive, owned by mac80211 after this call
+ */
+static inline void ieee80211_rx_ni(struct ieee80211_hw *hw,
+				   struct sk_buff *skb)
+{
+	local_bh_disable();
+	ieee80211_rx(hw, skb);
+	local_bh_enable();
+}
+
+/**
+ * ieee80211_sta_ps_transition - PS transition for connected sta
+ *
+ * When operating in AP mode with the %IEEE80211_HW_AP_LINK_PS
+ * flag set, use this function to inform mac80211 about a connected station
+ * entering/leaving PS mode.
+ *
+ * This function may not be called in IRQ context or with softirqs enabled.
+ *
+ * Calls to this function for a single hardware must be synchronized against
+ * each other.
+ *
+ * The function returns -EINVAL when the requested PS mode is already set.
+ *
+ * @sta: currently connected sta
+ * @start: start or stop PS
+ */
+int ieee80211_sta_ps_transition(struct ieee80211_sta *sta, bool start);
+
+/**
+ * ieee80211_sta_ps_transition_ni - PS transition for connected sta
+ *                                  (in process context)
+ *
+ * Like ieee80211_sta_ps_transition() but can be called in process context
+ * (internally disables bottom halves). Concurrent call restriction still
+ * applies.
+ *
+ * @sta: currently connected sta
+ * @start: start or stop PS
+ */
+static inline int ieee80211_sta_ps_transition_ni(struct ieee80211_sta *sta,
+						  bool start)
+{
+	int ret;
+
+	local_bh_disable();
+	ret = ieee80211_sta_ps_transition(sta, start);
+	local_bh_enable();
+
+	return ret;
+}
+
+/*
+ * The TX headroom reserved by mac80211 for its own tx_status functions.
+ * This is enough for the radiotap header.
+ */
+#define IEEE80211_TX_STATUS_HEADROOM	14
+
+/**
+ * ieee80211_sta_set_buffered - inform mac80211 about driver-buffered frames
+ * @sta: &struct ieee80211_sta pointer for the sleeping station
+ * @tid: the TID that has buffered frames
+ * @buffered: indicates whether or not frames are buffered for this TID
+ *
+ * If a driver buffers frames for a powersave station instead of passing
+ * them back to mac80211 for retransmission, the station may still need
+ * to be told that there are buffered frames via the TIM bit.
+ *
+ * This function informs mac80211 whether or not there are frames that are
+ * buffered in the driver for a given TID; mac80211 can then use this data
+ * to set the TIM bit (NOTE: This may call back into the driver's set_tim
+ * call! Beware of the locking!)
+ *
+ * If all frames are released to the station (due to PS-poll or uAPSD)
+ * then the driver needs to inform mac80211 that there no longer are
+ * frames buffered. However, when the station wakes up mac80211 assumes
+ * that all buffered frames will be transmitted and clears this data,
+ * drivers need to make sure they inform mac80211 about all buffered
+ * frames on the sleep transition (sta_notify() with %STA_NOTIFY_SLEEP).
+ *
+ * Note that technically mac80211 only needs to know this per AC, not per
+ * TID, but since driver buffering will inevitably happen per TID (since
+ * it is related to aggregation) it is easier to make mac80211 map the
+ * TID to the AC as required instead of keeping track in all drivers that
+ * use this API.
+ */
+void ieee80211_sta_set_buffered(struct ieee80211_sta *sta,
+				u8 tid, bool buffered);
+
+/**
+ * ieee80211_tx_status - transmit status callback
+ *
+ * Call this function for all transmitted frames after they have been
+ * transmitted. It is permissible to not call this function for
+ * multicast frames but this can affect statistics.
+ *
+ * This function may not be called in IRQ context. Calls to this function
+ * for a single hardware must be synchronized against each other. Calls
+ * to this function, ieee80211_tx_status_ni() and ieee80211_tx_status_irqsafe()
+ * may not be mixed for a single hardware.
+ *
+ * @hw: the hardware the frame was transmitted by
+ * @skb: the frame that was transmitted, owned by mac80211 after this call
+ */
+void ieee80211_tx_status(struct ieee80211_hw *hw,
+			 struct sk_buff *skb);
+
+/**
+ * ieee80211_tx_status_ni - transmit status callback (in process context)
+ *
+ * Like ieee80211_tx_status() but can be called in process context.
+ *
+ * Calls to this function, ieee80211_tx_status() and
+ * ieee80211_tx_status_irqsafe() may not be mixed
+ * for a single hardware.
+ *
+ * @hw: the hardware the frame was transmitted by
+ * @skb: the frame that was transmitted, owned by mac80211 after this call
+ */
+static inline void ieee80211_tx_status_ni(struct ieee80211_hw *hw,
+					  struct sk_buff *skb)
+{
+	local_bh_disable();
+	ieee80211_tx_status(hw, skb);
+	local_bh_enable();
+}
+
+/**
+ * ieee80211_tx_status_irqsafe - IRQ-safe transmit status callback
+ *
+ * Like ieee80211_tx_status() but can be called in IRQ context
+ * (internally defers to a tasklet.)
+ *
+ * Calls to this function, ieee80211_tx_status() and
+ * ieee80211_tx_status_ni() may not be mixed for a single hardware.
+ *
+ * @hw: the hardware the frame was transmitted by
+ * @skb: the frame that was transmitted, owned by mac80211 after this call
+ */
+void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
+				 struct sk_buff *skb);
+
+/**
+ * ieee80211_report_low_ack - report non-responding station
+ *
+ * When operating in AP-mode, call this function to report a non-responding
+ * connected STA.
+ *
+ * @sta: the non-responding connected sta
+ * @num_packets: number of packets sent to @sta without a response
+ */
+void ieee80211_report_low_ack(struct ieee80211_sta *sta, u32 num_packets);
+
+/**
+ * ieee80211_beacon_get_tim - beacon generation function
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @tim_offset: pointer to variable that will receive the TIM IE offset.
+ *	Set to 0 if invalid (in non-AP modes).
+ * @tim_length: pointer to variable that will receive the TIM IE length,
+ *	(including the ID and length bytes!).
+ *	Set to 0 if invalid (in non-AP modes).
+ *
+ * If the driver implements beaconing modes, it must use this function to
+ * obtain the beacon frame/template.
+ *
+ * If the beacon frames are generated by the host system (i.e., not in
+ * hardware/firmware), the driver uses this function to get each beacon
+ * frame from mac80211 -- it is responsible for calling this function
+ * before the beacon is needed (e.g. based on hardware interrupt).
+ *
+ * If the beacon frames are generated by the device, then the driver
+ * must use the returned beacon as the template and change the TIM IE
+ * according to the current DTIM parameters/TIM bitmap.
+ *
+ * The driver is responsible for freeing the returned skb.
+ */
+struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
+					 struct ieee80211_vif *vif,
+					 u16 *tim_offset, u16 *tim_length);
+
+/**
+ * ieee80211_beacon_get - beacon generation function
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * See ieee80211_beacon_get_tim().
+ */
+static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
+						   struct ieee80211_vif *vif)
+{
+	return ieee80211_beacon_get_tim(hw, vif, NULL, NULL);
+}
+
+/**
+ * ieee80211_proberesp_get - retrieve a Probe Response template
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * Creates a Probe Response template which can, for example, be uploaded to
+ * hardware. The destination address should be set by the caller.
+ *
+ * Can only be called in AP mode.
+ */
+struct sk_buff *ieee80211_proberesp_get(struct ieee80211_hw *hw,
+					struct ieee80211_vif *vif);
+
+/**
+ * ieee80211_pspoll_get - retrieve a PS Poll template
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * Creates a PS Poll a template which can, for example, uploaded to
+ * hardware. The template must be updated after association so that correct
+ * AID, BSSID and MAC address is used.
+ *
+ * Note: Caller (or hardware) is responsible for setting the
+ * &IEEE80211_FCTL_PM bit.
+ */
+struct sk_buff *ieee80211_pspoll_get(struct ieee80211_hw *hw,
+				     struct ieee80211_vif *vif);
+
+/**
+ * ieee80211_nullfunc_get - retrieve a nullfunc template
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * Creates a Nullfunc template which can, for example, uploaded to
+ * hardware. The template must be updated after association so that correct
+ * BSSID and address is used.
+ *
+ * Note: Caller (or hardware) is responsible for setting the
+ * &IEEE80211_FCTL_PM bit as well as Duration and Sequence Control fields.
+ */
+struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw,
+				       struct ieee80211_vif *vif);
+
+/**
+ * ieee80211_probereq_get - retrieve a Probe Request template
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @ssid: SSID buffer
+ * @ssid_len: length of SSID
+ * @ie: buffer containing all IEs except SSID for the template
+ * @ie_len: length of the IE buffer
+ *
+ * Creates a Probe Request template which can, for example, be uploaded to
+ * hardware.
+ */
+struct sk_buff *ieee80211_probereq_get(struct ieee80211_hw *hw,
+				       struct ieee80211_vif *vif,
+				       const u8 *ssid, size_t ssid_len,
+				       const u8 *ie, size_t ie_len);
+
+/**
+ * ieee80211_rts_get - RTS frame generation function
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @frame: pointer to the frame that is going to be protected by the RTS.
+ * @frame_len: the frame length (in octets).
+ * @frame_txctl: &struct ieee80211_tx_info of the frame.
+ * @rts: The buffer where to store the RTS frame.
+ *
+ * If the RTS frames are generated by the host system (i.e., not in
+ * hardware/firmware), the low-level driver uses this function to receive
+ * the next RTS frame from the 802.11 code. The low-level is responsible
+ * for calling this function before and RTS frame is needed.
+ */
+void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+		       const void *frame, size_t frame_len,
+		       const struct ieee80211_tx_info *frame_txctl,
+		       struct ieee80211_rts *rts);
+
+/**
+ * ieee80211_rts_duration - Get the duration field for an RTS frame
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @frame_len: the length of the frame that is going to be protected by the RTS.
+ * @frame_txctl: &struct ieee80211_tx_info of the frame.
+ *
+ * If the RTS is generated in firmware, but the host system must provide
+ * the duration field, the low-level driver uses this function to receive
+ * the duration field value in little-endian byteorder.
+ */
+__le16 ieee80211_rts_duration(struct ieee80211_hw *hw,
+			      struct ieee80211_vif *vif, size_t frame_len,
+			      const struct ieee80211_tx_info *frame_txctl);
+
+/**
+ * ieee80211_ctstoself_get - CTS-to-self frame generation function
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @frame: pointer to the frame that is going to be protected by the CTS-to-self.
+ * @frame_len: the frame length (in octets).
+ * @frame_txctl: &struct ieee80211_tx_info of the frame.
+ * @cts: The buffer where to store the CTS-to-self frame.
+ *
+ * If the CTS-to-self frames are generated by the host system (i.e., not in
+ * hardware/firmware), the low-level driver uses this function to receive
+ * the next CTS-to-self frame from the 802.11 code. The low-level is responsible
+ * for calling this function before and CTS-to-self frame is needed.
+ */
+void ieee80211_ctstoself_get(struct ieee80211_hw *hw,
+			     struct ieee80211_vif *vif,
+			     const void *frame, size_t frame_len,
+			     const struct ieee80211_tx_info *frame_txctl,
+			     struct ieee80211_cts *cts);
+
+/**
+ * ieee80211_ctstoself_duration - Get the duration field for a CTS-to-self frame
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @frame_len: the length of the frame that is going to be protected by the CTS-to-self.
+ * @frame_txctl: &struct ieee80211_tx_info of the frame.
+ *
+ * If the CTS-to-self is generated in firmware, but the host system must provide
+ * the duration field, the low-level driver uses this function to receive
+ * the duration field value in little-endian byteorder.
+ */
+__le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw,
+				    struct ieee80211_vif *vif,
+				    size_t frame_len,
+				    const struct ieee80211_tx_info *frame_txctl);
+
+/**
+ * ieee80211_generic_frame_duration - Calculate the duration field for a frame
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @frame_len: the length of the frame.
+ * @rate: the rate at which the frame is going to be transmitted.
+ *
+ * Calculate the duration field of some generic frame, given its
+ * length and transmission rate (in 100kbps).
+ */
+__le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw,
+					struct ieee80211_vif *vif,
+					size_t frame_len,
+					struct ieee80211_rate *rate);
+
+/**
+ * ieee80211_get_buffered_bc - accessing buffered broadcast and multicast frames
+ * @hw: pointer as obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * Function for accessing buffered broadcast and multicast frames. If
+ * hardware/firmware does not implement buffering of broadcast/multicast
+ * frames when power saving is used, 802.11 code buffers them in the host
+ * memory. The low-level driver uses this function to fetch next buffered
+ * frame. In most cases, this is used when generating beacon frame. This
+ * function returns a pointer to the next buffered skb or NULL if no more
+ * buffered frames are available.
+ *
+ * Note: buffered frames are returned only after DTIM beacon frame was
+ * generated with ieee80211_beacon_get() and the low-level driver must thus
+ * call ieee80211_beacon_get() first. ieee80211_get_buffered_bc() returns
+ * NULL if the previous generated beacon was not DTIM, so the low-level driver
+ * does not need to check for DTIM beacons separately and should be able to
+ * use common code for all beacons.
+ */
+struct sk_buff *
+ieee80211_get_buffered_bc(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
+
+/**
+ * ieee80211_get_tkip_p1k_iv - get a TKIP phase 1 key for IV32
+ *
+ * This function returns the TKIP phase 1 key for the given IV32.
+ *
+ * @keyconf: the parameter passed with the set key
+ * @iv32: IV32 to get the P1K for
+ * @p1k: a buffer to which the key will be written, as 5 u16 values
+ */
+void ieee80211_get_tkip_p1k_iv(struct ieee80211_key_conf *keyconf,
+			       u32 iv32, u16 *p1k);
+
+/**
+ * ieee80211_get_tkip_p1k - get a TKIP phase 1 key
+ *
+ * This function returns the TKIP phase 1 key for the IV32 taken
+ * from the given packet.
+ *
+ * @keyconf: the parameter passed with the set key
+ * @skb: the packet to take the IV32 value from that will be encrypted
+ *	with this P1K
+ * @p1k: a buffer to which the key will be written, as 5 u16 values
+ */
+static inline void ieee80211_get_tkip_p1k(struct ieee80211_key_conf *keyconf,
+					  struct sk_buff *skb, u16 *p1k)
+{
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	const u8 *data = (u8 *)hdr + ieee80211_hdrlen(hdr->frame_control);
+	u32 iv32 = get_unaligned_le32(&data[4]);
+
+	ieee80211_get_tkip_p1k_iv(keyconf, iv32, p1k);
+}
+
+/**
+ * ieee80211_get_tkip_rx_p1k - get a TKIP phase 1 key for RX
+ *
+ * This function returns the TKIP phase 1 key for the given IV32
+ * and transmitter address.
+ *
+ * @keyconf: the parameter passed with the set key
+ * @ta: TA that will be used with the key
+ * @iv32: IV32 to get the P1K for
+ * @p1k: a buffer to which the key will be written, as 5 u16 values
+ */
+void ieee80211_get_tkip_rx_p1k(struct ieee80211_key_conf *keyconf,
+			       const u8 *ta, u32 iv32, u16 *p1k);
+
+/**
+ * ieee80211_get_tkip_p2k - get a TKIP phase 2 key
+ *
+ * This function computes the TKIP RC4 key for the IV values
+ * in the packet.
+ *
+ * @keyconf: the parameter passed with the set key
+ * @skb: the packet to take the IV32/IV16 values from that will be
+ *	encrypted with this key
+ * @p2k: a buffer to which the key will be written, 16 bytes
+ */
+void ieee80211_get_tkip_p2k(struct ieee80211_key_conf *keyconf,
+			    struct sk_buff *skb, u8 *p2k);
+
+/**
+ * struct ieee80211_key_seq - key sequence counter
+ *
+ * @tkip: TKIP data, containing IV32 and IV16 in host byte order
+ * @ccmp: PN data, most significant byte first (big endian,
+ *	reverse order than in packet)
+ * @aes_cmac: PN data, most significant byte first (big endian,
+ *	reverse order than in packet)
+ */
+struct ieee80211_key_seq {
+	union {
+		struct {
+			u32 iv32;
+			u16 iv16;
+		} tkip;
+		struct {
+			u8 pn[6];
+		} ccmp;
+		struct {
+			u8 pn[6];
+		} aes_cmac;
+	};
+};
+
+/**
+ * ieee80211_get_key_tx_seq - get key TX sequence counter
+ *
+ * @keyconf: the parameter passed with the set key
+ * @seq: buffer to receive the sequence data
+ *
+ * This function allows a driver to retrieve the current TX IV/PN
+ * for the given key. It must not be called if IV generation is
+ * offloaded to the device.
+ *
+ * Note that this function may only be called when no TX processing
+ * can be done concurrently, for example when queues are stopped
+ * and the stop has been synchronized.
+ */
+void ieee80211_get_key_tx_seq(struct ieee80211_key_conf *keyconf,
+			      struct ieee80211_key_seq *seq);
+
+/**
+ * ieee80211_get_key_rx_seq - get key RX sequence counter
+ *
+ * @keyconf: the parameter passed with the set key
+ * @tid: The TID, or -1 for the management frame value (CCMP only);
+ *	the value on TID 0 is also used for non-QoS frames. For
+ *	CMAC, only TID 0 is valid.
+ * @seq: buffer to receive the sequence data
+ *
+ * This function allows a driver to retrieve the current RX IV/PNs
+ * for the given key. It must not be called if IV checking is done
+ * by the device and not by mac80211.
+ *
+ * Note that this function may only be called when no RX processing
+ * can be done concurrently.
+ */
+void ieee80211_get_key_rx_seq(struct ieee80211_key_conf *keyconf,
+			      int tid, struct ieee80211_key_seq *seq);
+
+/**
+ * ieee80211_gtk_rekey_notify - notify userspace supplicant of rekeying
+ * @vif: virtual interface the rekeying was done on
+ * @bssid: The BSSID of the AP, for checking association
+ * @replay_ctr: the new replay counter after GTK rekeying
+ * @gfp: allocation flags
+ */
+void ieee80211_gtk_rekey_notify(struct ieee80211_vif *vif, const u8 *bssid,
+				const u8 *replay_ctr, gfp_t gfp);
+
+/**
+ * ieee80211_wake_queue - wake specific queue
+ * @hw: pointer as obtained from ieee80211_alloc_hw().
+ * @queue: queue number (counted from zero).
+ *
+ * Drivers should use this function instead of netif_wake_queue.
+ */
+void ieee80211_wake_queue(struct ieee80211_hw *hw, int queue);
+
+/**
+ * ieee80211_stop_queue - stop specific queue
+ * @hw: pointer as obtained from ieee80211_alloc_hw().
+ * @queue: queue number (counted from zero).
+ *
+ * Drivers should use this function instead of netif_stop_queue.
+ */
+void ieee80211_stop_queue(struct ieee80211_hw *hw, int queue);
+
+/**
+ * ieee80211_queue_stopped - test status of the queue
+ * @hw: pointer as obtained from ieee80211_alloc_hw().
+ * @queue: queue number (counted from zero).
+ *
+ * Drivers should use this function instead of netif_stop_queue.
+ */
+
+int ieee80211_queue_stopped(struct ieee80211_hw *hw, int queue);
+
+/**
+ * ieee80211_stop_queues - stop all queues
+ * @hw: pointer as obtained from ieee80211_alloc_hw().
+ *
+ * Drivers should use this function instead of netif_stop_queue.
+ */
+void ieee80211_stop_queues(struct ieee80211_hw *hw);
+
+/**
+ * ieee80211_wake_queues - wake all queues
+ * @hw: pointer as obtained from ieee80211_alloc_hw().
+ *
+ * Drivers should use this function instead of netif_wake_queue.
+ */
+void ieee80211_wake_queues(struct ieee80211_hw *hw);
+
+/**
+ * ieee80211_scan_completed - completed hardware scan
+ *
+ * When hardware scan offload is used (i.e. the hw_scan() callback is
+ * assigned) this function needs to be called by the driver to notify
+ * mac80211 that the scan finished. This function can be called from
+ * any context, including hardirq context.
+ *
+ * @hw: the hardware that finished the scan
+ * @aborted: set to true if scan was aborted
+ */
+void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted);
+
+/**
+ * ieee80211_sched_scan_results - got results from scheduled scan
+ *
+ * When a scheduled scan is running, this function needs to be called by the
+ * driver whenever there are new scan results available.
+ *
+ * @hw: the hardware that is performing scheduled scans
+ */
+void ieee80211_sched_scan_results(struct ieee80211_hw *hw);
+
+/**
+ * ieee80211_sched_scan_stopped - inform that the scheduled scan has stopped
+ *
+ * When a scheduled scan is running, this function can be called by
+ * the driver if it needs to stop the scan to perform another task.
+ * Usual scenarios are drivers that cannot continue the scheduled scan
+ * while associating, for instance.
+ *
+ * @hw: the hardware that is performing scheduled scans
+ */
+void ieee80211_sched_scan_stopped(struct ieee80211_hw *hw);
+
+/**
+ * ieee80211_iterate_active_interfaces - iterate active interfaces
+ *
+ * This function iterates over the interfaces associated with a given
+ * hardware that are currently active and calls the callback for them.
+ * This function allows the iterator function to sleep, when the iterator
+ * function is atomic @ieee80211_iterate_active_interfaces_atomic can
+ * be used.
+ * Does not iterate over a new interface during add_interface()
+ *
+ * @hw: the hardware struct of which the interfaces should be iterated over
+ * @iterator: the iterator function to call
+ * @data: first argument of the iterator function
+ */
+void ieee80211_iterate_active_interfaces(struct ieee80211_hw *hw,
+					 void (*iterator)(void *data, u8 *mac,
+						struct ieee80211_vif *vif),
+					 void *data);
+
+/**
+ * ieee80211_iterate_active_interfaces_atomic - iterate active interfaces
+ *
+ * This function iterates over the interfaces associated with a given
+ * hardware that are currently active and calls the callback for them.
+ * This function requires the iterator callback function to be atomic,
+ * if that is not desired, use @ieee80211_iterate_active_interfaces instead.
+ * Does not iterate over a new interface during add_interface()
+ *
+ * @hw: the hardware struct of which the interfaces should be iterated over
+ * @iterator: the iterator function to call, cannot sleep
+ * @data: first argument of the iterator function
+ */
+void ieee80211_iterate_active_interfaces_atomic(struct ieee80211_hw *hw,
+						void (*iterator)(void *data,
+						    u8 *mac,
+						    struct ieee80211_vif *vif),
+						void *data);
+
+/**
+ * ieee80211_queue_work - add work onto the mac80211 workqueue
+ *
+ * Drivers and mac80211 use this to add work onto the mac80211 workqueue.
+ * This helper ensures drivers are not queueing work when they should not be.
+ *
+ * @hw: the hardware struct for the interface we are adding work for
+ * @work: the work we want to add onto the mac80211 workqueue
+ */
+void ieee80211_queue_work(struct ieee80211_hw *hw, struct work_struct *work);
+
+/**
+ * ieee80211_queue_delayed_work - add work onto the mac80211 workqueue
+ *
+ * Drivers and mac80211 use this to queue delayed work onto the mac80211
+ * workqueue.
+ *
+ * @hw: the hardware struct for the interface we are adding work for
+ * @dwork: delayable work to queue onto the mac80211 workqueue
+ * @delay: number of jiffies to wait before queueing
+ */
+void ieee80211_queue_delayed_work(struct ieee80211_hw *hw,
+				  struct delayed_work *dwork,
+				  unsigned long delay);
+
+/**
+ * ieee80211_start_tx_ba_session - Start a tx Block Ack session.
+ * @sta: the station for which to start a BA session
+ * @tid: the TID to BA on.
+ * @timeout: session timeout value (in TUs)
+ *
+ * Return: success if addBA request was sent, failure otherwise
+ *
+ * Although mac80211/low level driver/user space application can estimate
+ * the need to start aggregation on a certain RA/TID, the session level
+ * will be managed by the mac80211.
+ */
+int ieee80211_start_tx_ba_session(struct ieee80211_sta *sta, u16 tid,
+				  u16 timeout);
+
+/**
+ * ieee80211_start_tx_ba_cb_irqsafe - low level driver ready to aggregate.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback
+ * @ra: receiver address of the BA session recipient.
+ * @tid: the TID to BA on.
+ *
+ * This function must be called by low level driver once it has
+ * finished with preparations for the BA session. It can be called
+ * from any context.
+ */
+void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, const u8 *ra,
+				      u16 tid);
+
+/**
+ * ieee80211_stop_tx_ba_session - Stop a Block Ack session.
+ * @sta: the station whose BA session to stop
+ * @tid: the TID to stop BA.
+ *
+ * Return: negative error if the TID is invalid, or no aggregation active
+ *
+ * Although mac80211/low level driver/user space application can estimate
+ * the need to stop aggregation on a certain RA/TID, the session level
+ * will be managed by the mac80211.
+ */
+int ieee80211_stop_tx_ba_session(struct ieee80211_sta *sta, u16 tid);
+
+/**
+ * ieee80211_stop_tx_ba_cb_irqsafe - low level driver ready to stop aggregate.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback
+ * @ra: receiver address of the BA session recipient.
+ * @tid: the desired TID to BA on.
+ *
+ * This function must be called by low level driver once it has
+ * finished with preparations for the BA session tear down. It
+ * can be called from any context.
+ */
+void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, const u8 *ra,
+				     u16 tid);
+
+/**
+ * ieee80211_find_sta - find a station
+ *
+ * @vif: virtual interface to look for station on
+ * @addr: station's address
+ *
+ * This function must be called under RCU lock and the
+ * resulting pointer is only valid under RCU lock as well.
+ */
+struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif,
+					 const u8 *addr);
+
+/**
+ * ieee80211_find_sta_by_ifaddr - find a station on hardware
+ *
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ * @addr: remote station's address
+ * @localaddr: local address (vif->sdata->vif.addr). Use NULL for 'any'.
+ *
+ * This function must be called under RCU lock and the
+ * resulting pointer is only valid under RCU lock as well.
+ *
+ * NOTE: You may pass NULL for localaddr, but then you will just get
+ *      the first STA that matches the remote address 'addr'.
+ *      We can have multiple STA associated with multiple
+ *      logical stations (e.g. consider a station connecting to another
+ *      BSSID on the same AP hardware without disconnecting first).
+ *      In this case, the result of this method with localaddr NULL
+ *      is not reliable.
+ *
+ * DO NOT USE THIS FUNCTION with localaddr NULL if at all possible.
+ */
+struct ieee80211_sta *ieee80211_find_sta_by_ifaddr(struct ieee80211_hw *hw,
+					       const u8 *addr,
+					       const u8 *localaddr);
+
+/**
+ * ieee80211_sta_block_awake - block station from waking up
+ * @hw: the hardware
+ * @pubsta: the station
+ * @block: whether to block or unblock
+ *
+ * Some devices require that all frames that are on the queues
+ * for a specific station that went to sleep are flushed before
+ * a poll response or frames after the station woke up can be
+ * delivered to that it. Note that such frames must be rejected
+ * by the driver as filtered, with the appropriate status flag.
+ *
+ * This function allows implementing this mode in a race-free
+ * manner.
+ *
+ * To do this, a driver must keep track of the number of frames
+ * still enqueued for a specific station. If this number is not
+ * zero when the station goes to sleep, the driver must call
+ * this function to force mac80211 to consider the station to
+ * be asleep regardless of the station's actual state. Once the
+ * number of outstanding frames reaches zero, the driver must
+ * call this function again to unblock the station. That will
+ * cause mac80211 to be able to send ps-poll responses, and if
+ * the station queried in the meantime then frames will also
+ * be sent out as a result of this. Additionally, the driver
+ * will be notified that the station woke up some time after
+ * it is unblocked, regardless of whether the station actually
+ * woke up while blocked or not.
+ */
+void ieee80211_sta_block_awake(struct ieee80211_hw *hw,
+			       struct ieee80211_sta *pubsta, bool block);
+
+/**
+ * ieee80211_sta_eosp - notify mac80211 about end of SP
+ * @pubsta: the station
+ *
+ * When a device transmits frames in a way that it can't tell
+ * mac80211 in the TX status about the EOSP, it must clear the
+ * %IEEE80211_TX_STATUS_EOSP bit and call this function instead.
+ * This applies for PS-Poll as well as uAPSD.
+ *
+ * Note that there is no non-_irqsafe version right now as
+ * it wasn't needed, but just like _tx_status() and _rx()
+ * must not be mixed in irqsafe/non-irqsafe versions, this
+ * function must not be mixed with those either. Use the
+ * all irqsafe, or all non-irqsafe, don't mix! If you need
+ * the non-irqsafe version of this, you need to add it.
+ */
+void ieee80211_sta_eosp_irqsafe(struct ieee80211_sta *pubsta);
+
+/**
+ * ieee80211_iter_keys - iterate keys programmed into the device
+ * @hw: pointer obtained from ieee80211_alloc_hw()
+ * @vif: virtual interface to iterate, may be %NULL for all
+ * @iter: iterator function that will be called for each key
+ * @iter_data: custom data to pass to the iterator function
+ *
+ * This function can be used to iterate all the keys known to
+ * mac80211, even those that weren't previously programmed into
+ * the device. This is intended for use in WoWLAN if the device
+ * needs reprogramming of the keys during suspend. Note that due
+ * to locking reasons, it is also only safe to call this at few
+ * spots since it must hold the RTNL and be able to sleep.
+ *
+ * The order in which the keys are iterated matches the order
+ * in which they were originally installed and handed to the
+ * set_key callback.
+ */
+void ieee80211_iter_keys(struct ieee80211_hw *hw,
+			 struct ieee80211_vif *vif,
+			 void (*iter)(struct ieee80211_hw *hw,
+				      struct ieee80211_vif *vif,
+				      struct ieee80211_sta *sta,
+				      struct ieee80211_key_conf *key,
+				      void *data),
+			 void *iter_data);
+
+/**
+ * ieee80211_ap_probereq_get - retrieve a Probe Request template
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * Creates a Probe Request template which can, for example, be uploaded to
+ * hardware. The template is filled with bssid, ssid and supported rate
+ * information. This function must only be called from within the
+ * .bss_info_changed callback function and only in managed mode. The function
+ * is only useful when the interface is associated, otherwise it will return
+ * NULL.
+ */
+struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw,
+					  struct ieee80211_vif *vif);
+
+/**
+ * ieee80211_beacon_loss - inform hardware does not receive beacons
+ *
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * When beacon filtering is enabled with %IEEE80211_VIF_BEACON_FILTER and
+ * %IEEE80211_CONF_PS is set, the driver needs to inform whenever the
+ * hardware is not receiving beacons with this function.
+ */
+void ieee80211_beacon_loss(struct ieee80211_vif *vif);
+
+/**
+ * ieee80211_connection_loss - inform hardware has lost connection to the AP
+ *
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * When beacon filtering is enabled with %IEEE80211_VIF_BEACON_FILTER, and
+ * %IEEE80211_CONF_PS and %IEEE80211_HW_CONNECTION_MONITOR are set, the driver
+ * needs to inform if the connection to the AP has been lost.
+ *
+ * This function will cause immediate change to disassociated state,
+ * without connection recovery attempts.
+ */
+void ieee80211_connection_loss(struct ieee80211_vif *vif);
+
+/**
+ * ieee80211_resume_disconnect - disconnect from AP after resume
+ *
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * Instructs mac80211 to disconnect from the AP after resume.
+ * Drivers can use this after WoWLAN if they know that the
+ * connection cannot be kept up, for example because keys were
+ * used while the device was asleep but the replay counters or
+ * similar cannot be retrieved from the device during resume.
+ *
+ * Note that due to implementation issues, if the driver uses
+ * the reconfiguration functionality during resume the interface
+ * will still be added as associated first during resume and then
+ * disconnect normally later.
+ *
+ * This function can only be called from the resume callback and
+ * the driver must not be holding any of its own locks while it
+ * calls this function, or at least not any locks it needs in the
+ * key configuration paths (if it supports HW crypto).
+ */
+void ieee80211_resume_disconnect(struct ieee80211_vif *vif);
+
+/**
+ * ieee80211_disable_dyn_ps - force mac80211 to temporarily disable dynamic psm
+ *
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * Some hardware require full power save to manage simultaneous BT traffic
+ * on the WLAN frequency. Full PSM is required periodically, whenever there are
+ * burst of BT traffic. The hardware gets information of BT traffic via
+ * hardware co-existence lines, and consequentially requests mac80211 to
+ * (temporarily) enter full psm.
+ * This function will only temporarily disable dynamic PS, not enable PSM if
+ * it was not already enabled.
+ * The driver must make sure to re-enable dynamic PS using
+ * ieee80211_enable_dyn_ps() if the driver has disabled it.
+ *
+ */
+void ieee80211_disable_dyn_ps(struct ieee80211_vif *vif);
+
+/**
+ * ieee80211_enable_dyn_ps - restore dynamic psm after being disabled
+ *
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * This function restores dynamic PS after being temporarily disabled via
+ * ieee80211_disable_dyn_ps(). Each ieee80211_disable_dyn_ps() call must
+ * be coupled with an eventual call to this function.
+ *
+ */
+void ieee80211_enable_dyn_ps(struct ieee80211_vif *vif);
+
+/**
+ * ieee80211_cqm_rssi_notify - inform a configured connection quality monitoring
+ *	rssi threshold triggered
+ *
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @rssi_event: the RSSI trigger event type
+ * @gfp: context flags
+ *
+ * When the %IEEE80211_VIF_SUPPORTS_CQM_RSSI is set, and a connection quality
+ * monitoring is configured with an rssi threshold, the driver will inform
+ * whenever the rssi level reaches the threshold.
+ */
+void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif,
+			       enum nl80211_cqm_rssi_threshold_event rssi_event,
+			       gfp_t gfp);
+
+/**
+ * ieee80211_get_operstate - get the operstate of the vif
+ *
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * The driver might need to know the operstate of the net_device
+ * (specifically, whether the link is IF_OPER_UP after resume)
+ */
+unsigned char ieee80211_get_operstate(struct ieee80211_vif *vif);
+
+/**
+ * ieee80211_chswitch_done - Complete channel switch process
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @success: make the channel switch successful or not
+ *
+ * Complete the channel switch post-process: set the new operational channel
+ * and wake up the suspended queues.
+ */
+void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success);
+
+/**
+ * ieee80211_request_smps - request SM PS transition
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @smps_mode: new SM PS mode
+ *
+ * This allows the driver to request an SM PS transition in managed
+ * mode. This is useful when the driver has more information than
+ * the stack about possible interference, for example by bluetooth.
+ */
+void ieee80211_request_smps(struct ieee80211_vif *vif,
+			    enum ieee80211_smps_mode smps_mode);
+
+/**
+ * ieee80211_key_removed - disable hw acceleration for key
+ * @key_conf: The key hw acceleration should be disabled for
+ *
+ * This allows drivers to indicate that the given key has been
+ * removed from hardware acceleration, due to a new key that
+ * was added. Don't use this if the key can continue to be used
+ * for TX, if the key restriction is on RX only it is permitted
+ * to keep the key for TX only and not call this function.
+ *
+ * Due to locking constraints, it may only be called during
+ * @set_key. This function must be allowed to sleep, and the
+ * key it tries to disable may still be used until it returns.
+ */
+void ieee80211_key_removed(struct ieee80211_key_conf *key_conf);
+
+/**
+ * ieee80211_ready_on_channel - notification of remain-on-channel start
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ */
+void ieee80211_ready_on_channel(struct ieee80211_hw *hw);
+
+/**
+ * ieee80211_remain_on_channel_expired - remain_on_channel duration expired
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ */
+void ieee80211_remain_on_channel_expired(struct ieee80211_hw *hw);
+
+/**
+ * ieee80211_stop_rx_ba_session - callback to stop existing BA sessions
+ *
+ * in order not to harm the system performance and user experience, the device
+ * may request not to allow any rx ba session and tear down existing rx ba
+ * sessions based on system constraints such as periodic BT activity that needs
+ * to limit wlan activity (eg.sco or a2dp)."
+ * in such cases, the intention is to limit the duration of the rx ppdu and
+ * therefore prevent the peer device to use a-mpdu aggregation.
+ *
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @ba_rx_bitmap: Bit map of open rx ba per tid
+ * @addr: & to bssid mac address
+ */
+void ieee80211_stop_rx_ba_session(struct ieee80211_vif *vif, u16 ba_rx_bitmap,
+				  const u8 *addr);
+
+/**
+ * ieee80211_send_bar - send a BlockAckReq frame
+ *
+ * can be used to flush pending frames from the peer's aggregation reorder
+ * buffer.
+ *
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @ra: the peer's destination address
+ * @tid: the TID of the aggregation session
+ * @ssn: the new starting sequence number for the receiver
+ */
+void ieee80211_send_bar(struct ieee80211_vif *vif, u8 *ra, u16 tid, u16 ssn);
+
+/* Rate control API */
+
+/**
+ * enum rate_control_changed - flags to indicate which parameter changed
+ *
+ * @IEEE80211_RC_HT_CHANGED: The HT parameters of the operating channel have
+ *	changed, rate control algorithm can update its internal state if needed.
+ * @IEEE80211_RC_SMPS_CHANGED: The SMPS state of the station changed, the rate
+ *	control algorithm needs to adjust accordingly.
+ */
+enum rate_control_changed {
+	IEEE80211_RC_HT_CHANGED		= BIT(0),
+	IEEE80211_RC_SMPS_CHANGED	= BIT(1),
+};
+
+/**
+ * struct ieee80211_tx_rate_control - rate control information for/from RC algo
+ *
+ * @hw: The hardware the algorithm is invoked for.
+ * @sband: The band this frame is being transmitted on.
+ * @bss_conf: the current BSS configuration
+ * @skb: the skb that will be transmitted, the control information in it needs
+ *	to be filled in
+ * @reported_rate: The rate control algorithm can fill this in to indicate
+ *	which rate should be reported to userspace as the current rate and
+ *	used for rate calculations in the mesh network.
+ * @rts: whether RTS will be used for this frame because it is longer than the
+ *	RTS threshold
+ * @short_preamble: whether mac80211 will request short-preamble transmission
+ *	if the selected rate supports it
+ * @max_rate_idx: user-requested maximum (legacy) rate
+ *	(deprecated; this will be removed once drivers get updated to use
+ *	rate_idx_mask)
+ * @rate_idx_mask: user-requested (legacy) rate mask
+ * @rate_idx_mcs_mask: user-requested MCS rate mask
+ * @bss: whether this frame is sent out in AP or IBSS mode
+ */
+struct ieee80211_tx_rate_control {
+	struct ieee80211_hw *hw;
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_bss_conf *bss_conf;
+	struct sk_buff *skb;
+	struct ieee80211_tx_rate reported_rate;
+	bool rts, short_preamble;
+	u8 max_rate_idx;
+	u32 rate_idx_mask;
+	u8 rate_idx_mcs_mask[IEEE80211_HT_MCS_MASK_LEN];
+	bool bss;
+};
+
+struct rate_control_ops {
+	struct module *module;
+	const char *name;
+	void *(*alloc)(struct ieee80211_hw *hw, struct dentry *debugfsdir);
+	void (*free)(void *priv);
+
+	void *(*alloc_sta)(void *priv, struct ieee80211_sta *sta, gfp_t gfp);
+	void (*rate_init)(void *priv, struct ieee80211_supported_band *sband,
+			  struct ieee80211_sta *sta, void *priv_sta);
+	void (*rate_update)(void *priv, struct ieee80211_supported_band *sband,
+			    struct ieee80211_sta *sta,
+			    void *priv_sta, u32 changed,
+			    enum nl80211_channel_type oper_chan_type);
+	void (*free_sta)(void *priv, struct ieee80211_sta *sta,
+			 void *priv_sta);
+
+	void (*tx_status)(void *priv, struct ieee80211_supported_band *sband,
+			  struct ieee80211_sta *sta, void *priv_sta,
+			  struct sk_buff *skb);
+	void (*get_rate)(void *priv, struct ieee80211_sta *sta, void *priv_sta,
+			 struct ieee80211_tx_rate_control *txrc);
+
+	void (*add_sta_debugfs)(void *priv, void *priv_sta,
+				struct dentry *dir);
+	void (*remove_sta_debugfs)(void *priv, void *priv_sta);
+};
+
+static inline int rate_supported(struct ieee80211_sta *sta,
+				 enum ieee80211_band band,
+				 int index)
+{
+	return (sta == NULL || sta->supp_rates[band] & BIT(index));
+}
+
+/**
+ * rate_control_send_low - helper for drivers for management/no-ack frames
+ *
+ * Rate control algorithms that agree to use the lowest rate to
+ * send management frames and NO_ACK data with the respective hw
+ * retries should use this in the beginning of their mac80211 get_rate
+ * callback. If true is returned the rate control can simply return.
+ * If false is returned we guarantee that sta and sta and priv_sta is
+ * not null.
+ *
+ * Rate control algorithms wishing to do more intelligent selection of
+ * rate for multicast/broadcast frames may choose to not use this.
+ *
+ * @sta: &struct ieee80211_sta pointer to the target destination. Note
+ * 	that this may be null.
+ * @priv_sta: private rate control structure. This may be null.
+ * @txrc: rate control information we sholud populate for mac80211.
+ */
+bool rate_control_send_low(struct ieee80211_sta *sta,
+			   void *priv_sta,
+			   struct ieee80211_tx_rate_control *txrc);
+
+
+static inline s8
+rate_lowest_index(struct ieee80211_supported_band *sband,
+		  struct ieee80211_sta *sta)
+{
+	int i;
+
+	for (i = 0; i < sband->n_bitrates; i++)
+		if (rate_supported(sta, sband->band, i))
+			return i;
+
+	/* warn when we cannot find a rate. */
+	WARN_ON_ONCE(1);
+
+	/* and return 0 (the lowest index) */
+	return 0;
+}
+
+static inline
+bool rate_usable_index_exists(struct ieee80211_supported_band *sband,
+			      struct ieee80211_sta *sta)
+{
+	unsigned int i;
+
+	for (i = 0; i < sband->n_bitrates; i++)
+		if (rate_supported(sta, sband->band, i))
+			return true;
+	return false;
+}
+
+int ieee80211_rate_control_register(struct rate_control_ops *ops);
+void ieee80211_rate_control_unregister(struct rate_control_ops *ops);
+
+static inline bool
+conf_is_ht20(struct ieee80211_conf *conf)
+{
+	return conf->channel_type == NL80211_CHAN_HT20;
+}
+
+static inline bool
+conf_is_ht40_minus(struct ieee80211_conf *conf)
+{
+	return conf->channel_type == NL80211_CHAN_HT40MINUS;
+}
+
+static inline bool
+conf_is_ht40_plus(struct ieee80211_conf *conf)
+{
+	return conf->channel_type == NL80211_CHAN_HT40PLUS;
+}
+
+static inline bool
+conf_is_ht40(struct ieee80211_conf *conf)
+{
+	return conf_is_ht40_minus(conf) || conf_is_ht40_plus(conf);
+}
+
+static inline bool
+conf_is_ht(struct ieee80211_conf *conf)
+{
+	return conf->channel_type != NL80211_CHAN_NO_HT;
+}
+
+static inline enum nl80211_iftype
+ieee80211_iftype_p2p(enum nl80211_iftype type, bool p2p)
+{
+	if (p2p) {
+		switch (type) {
+		case NL80211_IFTYPE_STATION:
+			return NL80211_IFTYPE_P2P_CLIENT;
+		case NL80211_IFTYPE_AP:
+			return NL80211_IFTYPE_P2P_GO;
+		default:
+			break;
+		}
+	}
+	return type;
+}
+
+static inline enum nl80211_iftype
+ieee80211_vif_type_p2p(struct ieee80211_vif *vif)
+{
+	return ieee80211_iftype_p2p(vif->type, vif->p2p);
+}
+
+void ieee80211_enable_rssi_reports(struct ieee80211_vif *vif,
+				   int rssi_min_thold,
+				   int rssi_max_thold);
+
+void ieee80211_disable_rssi_reports(struct ieee80211_vif *vif);
+
+int ieee80211_add_srates_ie(struct ieee80211_vif *vif, struct sk_buff *skb);
+
+int ieee80211_add_ext_srates_ie(struct ieee80211_vif *vif,
+				struct sk_buff *skb);
+#endif /* MAC80211_H */
diff --git a/include/net/mip6.h b/include/net/mip6.h
new file mode 100644
index 00000000..26ba99b5
--- /dev/null
+++ b/include/net/mip6.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C)2003-2006 Helsinki University of Technology
+ * Copyright (C)2003-2006 USAGI/WIDE Project
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+/*
+ * Authors:
+ *	Noriaki TAKAMIYA @USAGI
+ *	Masahide NAKAMURA @USAGI
+ *	YOSHIFUJI Hideaki @USAGI
+ */
+#ifndef _NET_MIP6_H
+#define _NET_MIP6_H
+
+#include <linux/skbuff.h>
+#include <net/sock.h>
+
+/*
+ * Mobility Header
+ */
+struct ip6_mh {
+	__u8	ip6mh_proto;
+	__u8	ip6mh_hdrlen;
+	__u8	ip6mh_type;
+	__u8	ip6mh_reserved;
+	__u16	ip6mh_cksum;
+	/* Followed by type specific messages */
+	__u8	data[0];
+} __packed;
+
+#define IP6_MH_TYPE_BRR		0   /* Binding Refresh Request */
+#define IP6_MH_TYPE_HOTI	1   /* HOTI Message   */
+#define IP6_MH_TYPE_COTI	2   /* COTI Message  */
+#define IP6_MH_TYPE_HOT		3   /* HOT Message   */
+#define IP6_MH_TYPE_COT		4   /* COT Message  */
+#define IP6_MH_TYPE_BU		5   /* Binding Update */
+#define IP6_MH_TYPE_BACK	6   /* Binding ACK */
+#define IP6_MH_TYPE_BERROR	7   /* Binding Error */
+#define IP6_MH_TYPE_MAX		IP6_MH_TYPE_BERROR
+
+#endif
diff --git a/include/net/mld.h b/include/net/mld.h
new file mode 100644
index 00000000..467143cd
--- /dev/null
+++ b/include/net/mld.h
@@ -0,0 +1,75 @@
+#ifndef LINUX_MLD_H
+#define LINUX_MLD_H
+
+#include <linux/in6.h>
+#include <linux/icmpv6.h>
+
+/* MLDv1 Query/Report/Done */
+struct mld_msg {
+	struct icmp6hdr		mld_hdr;
+	struct in6_addr		mld_mca;
+};
+
+#define mld_type		mld_hdr.icmp6_type
+#define mld_code		mld_hdr.icmp6_code
+#define mld_cksum		mld_hdr.icmp6_cksum
+#define mld_maxdelay		mld_hdr.icmp6_maxdelay
+#define mld_reserved		mld_hdr.icmp6_dataun.un_data16[1]
+
+/* Multicast Listener Discovery version 2 headers */
+/* MLDv2 Report */
+struct mld2_grec {
+	__u8		grec_type;
+	__u8		grec_auxwords;
+	__be16		grec_nsrcs;
+	struct in6_addr	grec_mca;
+	struct in6_addr	grec_src[0];
+};
+
+struct mld2_report {
+	struct icmp6hdr		mld2r_hdr;
+	struct mld2_grec	mld2r_grec[0];
+};
+
+#define mld2r_type		mld2r_hdr.icmp6_type
+#define mld2r_resv1		mld2r_hdr.icmp6_code
+#define mld2r_cksum		mld2r_hdr.icmp6_cksum
+#define mld2r_resv2		mld2r_hdr.icmp6_dataun.un_data16[0]
+#define mld2r_ngrec		mld2r_hdr.icmp6_dataun.un_data16[1]
+
+/* MLDv2 Query */
+struct mld2_query {
+	struct icmp6hdr		mld2q_hdr;
+	struct in6_addr		mld2q_mca;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8			mld2q_qrv:3,
+				mld2q_suppress:1,
+				mld2q_resv2:4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u8			mld2q_resv2:4,
+				mld2q_suppress:1,
+				mld2q_qrv:3;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+	__u8			mld2q_qqic;
+	__be16			mld2q_nsrcs;
+	struct in6_addr		mld2q_srcs[0];
+};
+
+#define mld2q_type		mld2q_hdr.icmp6_type
+#define mld2q_code		mld2q_hdr.icmp6_code
+#define mld2q_cksum		mld2q_hdr.icmp6_cksum
+#define mld2q_mrc		mld2q_hdr.icmp6_maxdelay
+#define mld2q_resv1		mld2q_hdr.icmp6_dataun.un_data16[1]
+
+/* Max Response Code */
+#define MLDV2_MASK(value, nb) ((nb)>=32 ? (value) : ((1<<(nb))-1) & (value))
+#define MLDV2_EXP(thresh, nbmant, nbexp, value) \
+	((value) < (thresh) ? (value) : \
+	((MLDV2_MASK(value, nbmant) | (1<<(nbmant))) << \
+	(MLDV2_MASK((value) >> (nbmant), nbexp) + (nbexp))))
+
+#define MLDV2_MRC(value) MLDV2_EXP(0x8000, 12, 3, value)
+
+#endif
diff --git a/include/net/ndisc.h b/include/net/ndisc.h
new file mode 100644
index 00000000..6f9c25a7
--- /dev/null
+++ b/include/net/ndisc.h
@@ -0,0 +1,183 @@
+#ifndef _NDISC_H
+#define _NDISC_H
+
+/*
+ *	ICMP codes for neighbour discovery messages
+ */
+
+#define NDISC_ROUTER_SOLICITATION	133
+#define NDISC_ROUTER_ADVERTISEMENT	134
+#define NDISC_NEIGHBOUR_SOLICITATION	135
+#define NDISC_NEIGHBOUR_ADVERTISEMENT	136
+#define NDISC_REDIRECT			137
+
+/*
+ * Router type: cross-layer information from link-layer to
+ * IPv6 layer reported by certain link types (e.g., RFC4214).
+ */
+#define NDISC_NODETYPE_UNSPEC		0	/* unspecified (default) */
+#define NDISC_NODETYPE_HOST		1	/* host or unauthorized router */
+#define NDISC_NODETYPE_NODEFAULT	2	/* non-default router */
+#define NDISC_NODETYPE_DEFAULT		3	/* default router */
+
+/*
+ *	ndisc options
+ */
+
+enum {
+	__ND_OPT_PREFIX_INFO_END = 0,
+	ND_OPT_SOURCE_LL_ADDR = 1,	/* RFC2461 */
+	ND_OPT_TARGET_LL_ADDR = 2,	/* RFC2461 */
+	ND_OPT_PREFIX_INFO = 3,		/* RFC2461 */
+	ND_OPT_REDIRECT_HDR = 4,	/* RFC2461 */
+	ND_OPT_MTU = 5,			/* RFC2461 */
+	__ND_OPT_ARRAY_MAX,
+	ND_OPT_ROUTE_INFO = 24,		/* RFC4191 */
+	ND_OPT_RDNSS = 25,		/* RFC5006 */
+	__ND_OPT_MAX
+};
+
+#define MAX_RTR_SOLICITATION_DELAY	HZ
+
+#define ND_REACHABLE_TIME		(30*HZ)
+#define ND_RETRANS_TIMER		HZ
+
+#include <linux/compiler.h>
+#include <linux/icmpv6.h>
+#include <linux/in6.h>
+#include <linux/types.h>
+
+#include <net/neighbour.h>
+
+struct ctl_table;
+struct inet6_dev;
+struct net_device;
+struct net_proto_family;
+struct sk_buff;
+
+extern struct neigh_table nd_tbl;
+
+struct nd_msg {
+        struct icmp6hdr	icmph;
+        struct in6_addr	target;
+	__u8		opt[0];
+};
+
+struct rs_msg {
+	struct icmp6hdr	icmph;
+	__u8		opt[0];
+};
+
+struct ra_msg {
+        struct icmp6hdr		icmph;
+	__be32			reachable_time;
+	__be32			retrans_timer;
+};
+
+struct nd_opt_hdr {
+	__u8		nd_opt_type;
+	__u8		nd_opt_len;
+} __packed;
+
+static inline u32 ndisc_hashfn(const void *pkey, const struct net_device *dev, __u32 *hash_rnd)
+{
+	const u32 *p32 = pkey;
+
+	return (((p32[0] ^ dev->ifindex) * hash_rnd[0]) +
+		(p32[1] * hash_rnd[1]) +
+		(p32[2] * hash_rnd[2]) +
+		(p32[3] * hash_rnd[3]));
+}
+
+static inline struct neighbour *__ipv6_neigh_lookup(struct neigh_table *tbl, struct net_device *dev, const void *pkey)
+{
+	struct neigh_hash_table *nht;
+	const u32 *p32 = pkey;
+	struct neighbour *n;
+	u32 hash_val;
+
+	rcu_read_lock_bh();
+	nht = rcu_dereference_bh(tbl->nht);
+	hash_val = ndisc_hashfn(pkey, dev, nht->hash_rnd) >> (32 - nht->hash_shift);
+	for (n = rcu_dereference_bh(nht->hash_buckets[hash_val]);
+	     n != NULL;
+	     n = rcu_dereference_bh(n->next)) {
+		u32 *n32 = (u32 *) n->primary_key;
+		if (n->dev == dev &&
+		    ((n32[0] ^ p32[0]) | (n32[1] ^ p32[1]) |
+		     (n32[2] ^ p32[2]) | (n32[3] ^ p32[3])) == 0) {
+			if (!atomic_inc_not_zero(&n->refcnt))
+				n = NULL;
+			break;
+		}
+	}
+	rcu_read_unlock_bh();
+
+	return n;
+}
+
+extern int			ndisc_init(void);
+
+extern void			ndisc_cleanup(void);
+
+extern int			ndisc_rcv(struct sk_buff *skb);
+
+extern void			ndisc_send_ns(struct net_device *dev,
+					      struct neighbour *neigh,
+					      const struct in6_addr *solicit,
+					      const struct in6_addr *daddr,
+					      const struct in6_addr *saddr);
+
+extern void			ndisc_send_rs(struct net_device *dev,
+					      const struct in6_addr *saddr,
+					      const struct in6_addr *daddr);
+
+extern void			ndisc_send_redirect(struct sk_buff *skb,
+						    const struct in6_addr *target);
+
+extern int			ndisc_mc_map(const struct in6_addr *addr, char *buf,
+					     struct net_device *dev, int dir);
+
+extern struct sk_buff		*ndisc_build_skb(struct net_device *dev,
+						 const struct in6_addr *daddr,
+						 const struct in6_addr *saddr,
+						 struct icmp6hdr *icmp6h,
+						 const struct in6_addr *target,
+						 int llinfo);
+
+extern void			ndisc_send_skb(struct sk_buff *skb,
+					       struct net_device *dev,
+					       struct neighbour *neigh,
+					       const struct in6_addr *daddr,
+					       const struct in6_addr *saddr,
+					       struct icmp6hdr *icmp6h);
+
+
+
+/*
+ *	IGMP
+ */
+extern int			igmp6_init(void);
+
+extern void			igmp6_cleanup(void);
+
+extern int			igmp6_event_query(struct sk_buff *skb);
+
+extern int			igmp6_event_report(struct sk_buff *skb);
+
+
+#ifdef CONFIG_SYSCTL
+extern int 			ndisc_ifinfo_sysctl_change(struct ctl_table *ctl,
+							   int write,
+							   void __user *buffer,
+							   size_t *lenp,
+							   loff_t *ppos);
+int ndisc_ifinfo_sysctl_strategy(ctl_table *ctl,
+				 void __user *oldval, size_t __user *oldlenp,
+				 void __user *newval, size_t newlen);
+#endif
+
+extern void 			inet6_ifinfo_notify(int event,
+						    struct inet6_dev *idev);
+
+#endif
diff --git a/include/net/neighbour.h b/include/net/neighbour.h
new file mode 100644
index 00000000..34c996f4
--- /dev/null
+++ b/include/net/neighbour.h
@@ -0,0 +1,407 @@
+#ifndef _NET_NEIGHBOUR_H
+#define _NET_NEIGHBOUR_H
+
+#include <linux/neighbour.h>
+
+/*
+ *	Generic neighbour manipulation
+ *
+ *	Authors:
+ *	Pedro Roque		<roque@di.fc.ul.pt>
+ *	Alexey Kuznetsov	<kuznet@ms2.inr.ac.ru>
+ *
+ * 	Changes:
+ *
+ *	Harald Welte:		<laforge@gnumonks.org>
+ *		- Add neighbour cache statistics like rtstat
+ */
+
+#include <linux/atomic.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/rcupdate.h>
+#include <linux/seq_file.h>
+
+#include <linux/err.h>
+#include <linux/sysctl.h>
+#include <linux/workqueue.h>
+#include <net/rtnetlink.h>
+
+/*
+ * NUD stands for "neighbor unreachability detection"
+ */
+
+#define NUD_IN_TIMER	(NUD_INCOMPLETE|NUD_REACHABLE|NUD_DELAY|NUD_PROBE)
+#define NUD_VALID	(NUD_PERMANENT|NUD_NOARP|NUD_REACHABLE|NUD_PROBE|NUD_STALE|NUD_DELAY)
+#define NUD_CONNECTED	(NUD_PERMANENT|NUD_NOARP|NUD_REACHABLE)
+
+struct neighbour;
+
+struct neigh_parms {
+#ifdef CONFIG_NET_NS
+	struct net *net;
+#endif
+	struct net_device *dev;
+	struct neigh_parms *next;
+	int	(*neigh_setup)(struct neighbour *);
+	void	(*neigh_cleanup)(struct neighbour *);
+	struct neigh_table *tbl;
+
+	void	*sysctl_table;
+
+	int dead;
+	atomic_t refcnt;
+	struct rcu_head rcu_head;
+
+	int	base_reachable_time;
+	int	retrans_time;
+	int	gc_staletime;
+	int	reachable_time;
+	int	delay_probe_time;
+
+	int	queue_len_bytes;
+	int	ucast_probes;
+	int	app_probes;
+	int	mcast_probes;
+	int	anycast_delay;
+	int	proxy_delay;
+	int	proxy_qlen;
+	int	locktime;
+};
+
+struct neigh_statistics {
+	unsigned long allocs;		/* number of allocated neighs */
+	unsigned long destroys;		/* number of destroyed neighs */
+	unsigned long hash_grows;	/* number of hash resizes */
+
+	unsigned long res_failed;	/* number of failed resolutions */
+
+	unsigned long lookups;		/* number of lookups */
+	unsigned long hits;		/* number of hits (among lookups) */
+
+	unsigned long rcv_probes_mcast;	/* number of received mcast ipv6 */
+	unsigned long rcv_probes_ucast; /* number of received ucast ipv6 */
+
+	unsigned long periodic_gc_runs;	/* number of periodic GC runs */
+	unsigned long forced_gc_runs;	/* number of forced GC runs */
+
+	unsigned long unres_discards;	/* number of unresolved drops */
+};
+
+#define NEIGH_CACHE_STAT_INC(tbl, field) this_cpu_inc((tbl)->stats->field)
+
+struct neighbour {
+	struct neighbour __rcu	*next;
+	struct neigh_table	*tbl;
+	struct neigh_parms	*parms;
+	unsigned long		confirmed;
+	unsigned long		updated;
+	rwlock_t		lock;
+	atomic_t		refcnt;
+	struct sk_buff_head	arp_queue;
+	unsigned int		arp_queue_len_bytes;
+	struct timer_list	timer;
+	unsigned long		used;
+	atomic_t		probes;
+	__u8			flags;
+	__u8			nud_state;
+	__u8			type;
+	__u8			dead;
+	seqlock_t		ha_lock;
+	unsigned char		ha[ALIGN(MAX_ADDR_LEN, sizeof(unsigned long))];
+	struct hh_cache		hh;
+	int			(*output)(struct neighbour *, struct sk_buff *);
+	const struct neigh_ops	*ops;
+	struct rcu_head		rcu;
+	struct net_device	*dev;
+	u8			primary_key[0];
+};
+
+struct neigh_ops {
+	int			family;
+	void			(*solicit)(struct neighbour *, struct sk_buff *);
+	void			(*error_report)(struct neighbour *, struct sk_buff *);
+	int			(*output)(struct neighbour *, struct sk_buff *);
+	int			(*connected_output)(struct neighbour *, struct sk_buff *);
+};
+
+struct pneigh_entry {
+	struct pneigh_entry	*next;
+#ifdef CONFIG_NET_NS
+	struct net		*net;
+#endif
+	struct net_device	*dev;
+	u8			flags;
+	u8			key[0];
+};
+
+/*
+ *	neighbour table manipulation
+ */
+
+#define NEIGH_NUM_HASH_RND	4
+
+struct neigh_hash_table {
+	struct neighbour __rcu	**hash_buckets;
+	unsigned int		hash_shift;
+	__u32			hash_rnd[NEIGH_NUM_HASH_RND];
+	struct rcu_head		rcu;
+};
+
+
+struct neigh_table {
+	struct neigh_table	*next;
+	int			family;
+	int			entry_size;
+	int			key_len;
+	__u32			(*hash)(const void *pkey,
+					const struct net_device *dev,
+					__u32 *hash_rnd);
+	int			(*constructor)(struct neighbour *);
+	int			(*pconstructor)(struct pneigh_entry *);
+	void			(*pdestructor)(struct pneigh_entry *);
+	void			(*proxy_redo)(struct sk_buff *skb);
+	char			*id;
+	struct neigh_parms	parms;
+	/* HACK. gc_* should follow parms without a gap! */
+	int			gc_interval;
+	int			gc_thresh1;
+	int			gc_thresh2;
+	int			gc_thresh3;
+	unsigned long		last_flush;
+	struct delayed_work	gc_work;
+	struct timer_list 	proxy_timer;
+	struct sk_buff_head	proxy_queue;
+	atomic_t		entries;
+	rwlock_t		lock;
+	unsigned long		last_rand;
+	struct neigh_statistics	__percpu *stats;
+	struct neigh_hash_table __rcu *nht;
+	struct pneigh_entry	**phash_buckets;
+};
+
+#define NEIGH_PRIV_ALIGN	sizeof(long long)
+
+static inline void *neighbour_priv(const struct neighbour *n)
+{
+	return (char *)n + ALIGN(sizeof(*n) + n->tbl->key_len, NEIGH_PRIV_ALIGN);
+}
+
+/* flags for neigh_update() */
+#define NEIGH_UPDATE_F_OVERRIDE			0x00000001
+#define NEIGH_UPDATE_F_WEAK_OVERRIDE		0x00000002
+#define NEIGH_UPDATE_F_OVERRIDE_ISROUTER	0x00000004
+#define NEIGH_UPDATE_F_ISROUTER			0x40000000
+#define NEIGH_UPDATE_F_ADMIN			0x80000000
+
+extern void			neigh_table_init(struct neigh_table *tbl);
+extern void			neigh_table_init_no_netlink(struct neigh_table *tbl);
+extern int			neigh_table_clear(struct neigh_table *tbl);
+extern struct neighbour *	neigh_lookup(struct neigh_table *tbl,
+					     const void *pkey,
+					     struct net_device *dev);
+extern struct neighbour *	neigh_lookup_nodev(struct neigh_table *tbl,
+						   struct net *net,
+						   const void *pkey);
+extern struct neighbour *	neigh_create(struct neigh_table *tbl,
+					     const void *pkey,
+					     struct net_device *dev);
+extern void			neigh_destroy(struct neighbour *neigh);
+extern int			__neigh_event_send(struct neighbour *neigh, struct sk_buff *skb);
+extern int			neigh_update(struct neighbour *neigh, const u8 *lladdr, u8 new, 
+					     u32 flags);
+extern void			neigh_changeaddr(struct neigh_table *tbl, struct net_device *dev);
+extern int			neigh_ifdown(struct neigh_table *tbl, struct net_device *dev);
+extern int			neigh_resolve_output(struct neighbour *neigh, struct sk_buff *skb);
+extern int			neigh_connected_output(struct neighbour *neigh, struct sk_buff *skb);
+extern int			neigh_compat_output(struct neighbour *neigh, struct sk_buff *skb);
+extern int			neigh_direct_output(struct neighbour *neigh, struct sk_buff *skb);
+extern struct neighbour 	*neigh_event_ns(struct neigh_table *tbl,
+						u8 *lladdr, void *saddr,
+						struct net_device *dev);
+
+extern struct neigh_parms	*neigh_parms_alloc(struct net_device *dev, struct neigh_table *tbl);
+extern void			neigh_parms_release(struct neigh_table *tbl, struct neigh_parms *parms);
+
+static inline
+struct net			*neigh_parms_net(const struct neigh_parms *parms)
+{
+	return read_pnet(&parms->net);
+}
+
+extern unsigned long		neigh_rand_reach_time(unsigned long base);
+
+extern void			pneigh_enqueue(struct neigh_table *tbl, struct neigh_parms *p,
+					       struct sk_buff *skb);
+extern struct pneigh_entry	*pneigh_lookup(struct neigh_table *tbl, struct net *net, const void *key, struct net_device *dev, int creat);
+extern struct pneigh_entry	*__pneigh_lookup(struct neigh_table *tbl,
+						 struct net *net,
+						 const void *key,
+						 struct net_device *dev);
+extern int			pneigh_delete(struct neigh_table *tbl, struct net *net, const void *key, struct net_device *dev);
+
+static inline
+struct net			*pneigh_net(const struct pneigh_entry *pneigh)
+{
+	return read_pnet(&pneigh->net);
+}
+
+extern void neigh_app_ns(struct neighbour *n);
+extern void neigh_for_each(struct neigh_table *tbl, void (*cb)(struct neighbour *, void *), void *cookie);
+extern void __neigh_for_each_release(struct neigh_table *tbl, int (*cb)(struct neighbour *));
+extern void pneigh_for_each(struct neigh_table *tbl, void (*cb)(struct pneigh_entry *));
+
+struct neigh_seq_state {
+	struct seq_net_private p;
+	struct neigh_table *tbl;
+	struct neigh_hash_table *nht;
+	void *(*neigh_sub_iter)(struct neigh_seq_state *state,
+				struct neighbour *n, loff_t *pos);
+	unsigned int bucket;
+	unsigned int flags;
+#define NEIGH_SEQ_NEIGH_ONLY	0x00000001
+#define NEIGH_SEQ_IS_PNEIGH	0x00000002
+#define NEIGH_SEQ_SKIP_NOARP	0x00000004
+};
+extern void *neigh_seq_start(struct seq_file *, loff_t *, struct neigh_table *, unsigned int);
+extern void *neigh_seq_next(struct seq_file *, void *, loff_t *);
+extern void neigh_seq_stop(struct seq_file *, void *);
+
+extern int			neigh_sysctl_register(struct net_device *dev, 
+						      struct neigh_parms *p,
+						      char *p_name,
+						      proc_handler *proc_handler);
+extern void			neigh_sysctl_unregister(struct neigh_parms *p);
+
+static inline void __neigh_parms_put(struct neigh_parms *parms)
+{
+	atomic_dec(&parms->refcnt);
+}
+
+static inline struct neigh_parms *neigh_parms_clone(struct neigh_parms *parms)
+{
+	atomic_inc(&parms->refcnt);
+	return parms;
+}
+
+/*
+ *	Neighbour references
+ */
+
+static inline void neigh_release(struct neighbour *neigh)
+{
+	if (atomic_dec_and_test(&neigh->refcnt))
+		neigh_destroy(neigh);
+}
+
+static inline struct neighbour * neigh_clone(struct neighbour *neigh)
+{
+	if (neigh)
+		atomic_inc(&neigh->refcnt);
+	return neigh;
+}
+
+#define neigh_hold(n)	atomic_inc(&(n)->refcnt)
+
+static inline void neigh_confirm(struct neighbour *neigh)
+{
+	if (neigh)
+		neigh->confirmed = jiffies;
+}
+
+static inline int neigh_event_send(struct neighbour *neigh, struct sk_buff *skb)
+{
+	unsigned long now = jiffies;
+	
+	if (neigh->used != now)
+		neigh->used = now;
+	if (!(neigh->nud_state&(NUD_CONNECTED|NUD_DELAY|NUD_PROBE)))
+		return __neigh_event_send(neigh, skb);
+	return 0;
+}
+
+#ifdef CONFIG_BRIDGE_NETFILTER
+static inline int neigh_hh_bridge(struct hh_cache *hh, struct sk_buff *skb)
+{
+	unsigned seq, hh_alen;
+
+	do {
+		seq = read_seqbegin(&hh->hh_lock);
+		hh_alen = HH_DATA_ALIGN(ETH_HLEN);
+		memcpy(skb->data - hh_alen, hh->hh_data, ETH_ALEN + hh_alen - ETH_HLEN);
+	} while (read_seqretry(&hh->hh_lock, seq));
+	return 0;
+}
+#endif
+
+static inline int neigh_hh_output(struct hh_cache *hh, struct sk_buff *skb)
+{
+	unsigned seq;
+	int hh_len;
+
+	do {
+		int hh_alen;
+
+		seq = read_seqbegin(&hh->hh_lock);
+		hh_len = hh->hh_len;
+		hh_alen = HH_DATA_ALIGN(hh_len);
+		memcpy(skb->data - hh_alen, hh->hh_data, hh_alen);
+	} while (read_seqretry(&hh->hh_lock, seq));
+
+	skb_push(skb, hh_len);
+	return dev_queue_xmit(skb);
+}
+
+static inline int neigh_output(struct neighbour *n, struct sk_buff *skb)
+{
+	struct hh_cache *hh = &n->hh;
+	if ((n->nud_state & NUD_CONNECTED) && hh->hh_len)
+		return neigh_hh_output(hh, skb);
+	else
+		return n->output(n, skb);
+}
+
+static inline struct neighbour *
+__neigh_lookup(struct neigh_table *tbl, const void *pkey, struct net_device *dev, int creat)
+{
+	struct neighbour *n = neigh_lookup(tbl, pkey, dev);
+
+	if (n || !creat)
+		return n;
+
+	n = neigh_create(tbl, pkey, dev);
+	return IS_ERR(n) ? NULL : n;
+}
+
+static inline struct neighbour *
+__neigh_lookup_errno(struct neigh_table *tbl, const void *pkey,
+  struct net_device *dev)
+{
+	struct neighbour *n = neigh_lookup(tbl, pkey, dev);
+
+	if (n)
+		return n;
+
+	return neigh_create(tbl, pkey, dev);
+}
+
+struct neighbour_cb {
+	unsigned long sched_next;
+	unsigned int flags;
+};
+
+#define LOCALLY_ENQUEUED 0x1
+
+#define NEIGH_CB(skb)	((struct neighbour_cb *)(skb)->cb)
+
+static inline void neigh_ha_snapshot(char *dst, const struct neighbour *n,
+				     const struct net_device *dev)
+{
+	unsigned int seq;
+
+	do {
+		seq = read_seqbegin(&n->ha_lock);
+		memcpy(dst, n->ha, dev->addr_len);
+	} while (read_seqretry(&n->ha_lock, seq));
+}
+#endif
diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h
new file mode 100644
index 00000000..ee547c14
--- /dev/null
+++ b/include/net/net_namespace.h
@@ -0,0 +1,292 @@
+/*
+ * Operations on the network namespace
+ */
+#ifndef __NET_NET_NAMESPACE_H
+#define __NET_NET_NAMESPACE_H
+
+#include <linux/atomic.h>
+#include <linux/workqueue.h>
+#include <linux/list.h>
+#include <linux/sysctl.h>
+
+#include <net/netns/core.h>
+#include <net/netns/mib.h>
+#include <net/netns/unix.h>
+#include <net/netns/packet.h>
+#include <net/netns/ipv4.h>
+#include <net/netns/ipv6.h>
+#include <net/netns/dccp.h>
+#include <net/netns/x_tables.h>
+#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
+#include <net/netns/conntrack.h>
+#endif
+#include <net/netns/xfrm.h>
+
+struct proc_dir_entry;
+struct net_device;
+struct sock;
+struct ctl_table_header;
+struct net_generic;
+struct sock;
+struct netns_ipvs;
+
+
+#define NETDEV_HASHBITS    8
+#define NETDEV_HASHENTRIES (1 << NETDEV_HASHBITS)
+
+struct net {
+	atomic_t		passive;	/* To decided when the network
+						 * namespace should be freed.
+						 */
+	atomic_t		count;		/* To decided when the network
+						 *  namespace should be shut down.
+						 */
+#ifdef NETNS_REFCNT_DEBUG
+	atomic_t		use_count;	/* To track references we
+						 * destroy on demand
+						 */
+#endif
+	spinlock_t		rules_mod_lock;
+
+	struct list_head	list;		/* list of network namespaces */
+	struct list_head	cleanup_list;	/* namespaces on death row */
+	struct list_head	exit_list;	/* Use only net_mutex */
+
+	struct proc_dir_entry 	*proc_net;
+	struct proc_dir_entry 	*proc_net_stat;
+
+#ifdef CONFIG_SYSCTL
+	struct ctl_table_set	sysctls;
+#endif
+
+	struct sock 		*rtnl;			/* rtnetlink socket */
+	struct sock		*genl_sock;
+
+	struct list_head 	dev_base_head;
+	struct hlist_head 	*dev_name_head;
+	struct hlist_head	*dev_index_head;
+	unsigned int		dev_base_seq;	/* protected by rtnl_mutex */
+
+	/* core fib_rules */
+	struct list_head	rules_ops;
+
+
+	struct net_device       *loopback_dev;          /* The loopback */
+	struct netns_core	core;
+	struct netns_mib	mib;
+	struct netns_packet	packet;
+	struct netns_unix	unx;
+	struct netns_ipv4	ipv4;
+#if IS_ENABLED(CONFIG_IPV6)
+	struct netns_ipv6	ipv6;
+#endif
+#if defined(CONFIG_IP_DCCP) || defined(CONFIG_IP_DCCP_MODULE)
+	struct netns_dccp	dccp;
+#endif
+#ifdef CONFIG_NETFILTER
+	struct netns_xt		xt;
+#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
+	struct netns_ct		ct;
+#endif
+	struct sock		*nfnl;
+	struct sock		*nfnl_stash;
+#endif
+#ifdef CONFIG_WEXT_CORE
+	struct sk_buff_head	wext_nlevents;
+#endif
+	struct net_generic __rcu	*gen;
+
+	/* Note : following structs are cache line aligned */
+#ifdef CONFIG_XFRM
+	struct netns_xfrm	xfrm;
+#endif
+	struct netns_ipvs	*ipvs;
+};
+
+
+#include <linux/seq_file_net.h>
+
+/* Init's network namespace */
+extern struct net init_net;
+
+#ifdef CONFIG_NET
+extern struct net *copy_net_ns(unsigned long flags, struct net *net_ns);
+
+#else /* CONFIG_NET */
+static inline struct net *copy_net_ns(unsigned long flags, struct net *net_ns)
+{
+	/* There is nothing to copy so this is a noop */
+	return net_ns;
+}
+#endif /* CONFIG_NET */
+
+
+extern struct list_head net_namespace_list;
+
+extern struct net *get_net_ns_by_pid(pid_t pid);
+extern struct net *get_net_ns_by_fd(int pid);
+
+#ifdef CONFIG_NET_NS
+extern void __put_net(struct net *net);
+
+static inline struct net *get_net(struct net *net)
+{
+	atomic_inc(&net->count);
+	return net;
+}
+
+static inline struct net *maybe_get_net(struct net *net)
+{
+	/* Used when we know struct net exists but we
+	 * aren't guaranteed a previous reference count
+	 * exists.  If the reference count is zero this
+	 * function fails and returns NULL.
+	 */
+	if (!atomic_inc_not_zero(&net->count))
+		net = NULL;
+	return net;
+}
+
+static inline void put_net(struct net *net)
+{
+	if (atomic_dec_and_test(&net->count))
+		__put_net(net);
+}
+
+static inline
+int net_eq(const struct net *net1, const struct net *net2)
+{
+	return net1 == net2;
+}
+
+extern void net_drop_ns(void *);
+
+#else
+
+static inline struct net *get_net(struct net *net)
+{
+	return net;
+}
+
+static inline void put_net(struct net *net)
+{
+}
+
+static inline struct net *maybe_get_net(struct net *net)
+{
+	return net;
+}
+
+static inline
+int net_eq(const struct net *net1, const struct net *net2)
+{
+	return 1;
+}
+
+#define net_drop_ns NULL
+#endif
+
+
+#ifdef NETNS_REFCNT_DEBUG
+static inline struct net *hold_net(struct net *net)
+{
+	if (net)
+		atomic_inc(&net->use_count);
+	return net;
+}
+
+static inline void release_net(struct net *net)
+{
+	if (net)
+		atomic_dec(&net->use_count);
+}
+#else
+static inline struct net *hold_net(struct net *net)
+{
+	return net;
+}
+
+static inline void release_net(struct net *net)
+{
+}
+#endif
+
+#ifdef CONFIG_NET_NS
+
+static inline void write_pnet(struct net **pnet, struct net *net)
+{
+	*pnet = net;
+}
+
+static inline struct net *read_pnet(struct net * const *pnet)
+{
+	return *pnet;
+}
+
+#else
+
+#define write_pnet(pnet, net)	do { (void)(net);} while (0)
+#define read_pnet(pnet)		(&init_net)
+
+#endif
+
+#define for_each_net(VAR)				\
+	list_for_each_entry(VAR, &net_namespace_list, list)
+
+#define for_each_net_rcu(VAR)				\
+	list_for_each_entry_rcu(VAR, &net_namespace_list, list)
+
+#ifdef CONFIG_NET_NS
+#define __net_init
+#define __net_exit
+#define __net_initdata
+#else
+#define __net_init	__init
+#define __net_exit	__exit_refok
+#define __net_initdata	__initdata
+#endif
+
+struct pernet_operations {
+	struct list_head list;
+	int (*init)(struct net *net);
+	void (*exit)(struct net *net);
+	void (*exit_batch)(struct list_head *net_exit_list);
+	int *id;
+	size_t size;
+};
+
+/*
+ * Use these carefully.  If you implement a network device and it
+ * needs per network namespace operations use device pernet operations,
+ * otherwise use pernet subsys operations.
+ *
+ * Network interfaces need to be removed from a dying netns _before_
+ * subsys notifiers can be called, as most of the network code cleanup
+ * (which is done from subsys notifiers) runs with the assumption that
+ * dev_remove_pack has been called so no new packets will arrive during
+ * and after the cleanup functions have been called.  dev_remove_pack
+ * is not per namespace so instead the guarantee of no more packets
+ * arriving in a network namespace is provided by ensuring that all
+ * network devices and all sockets have left the network namespace
+ * before the cleanup methods are called.
+ *
+ * For the longest time the ipv4 icmp code was registered as a pernet
+ * device which caused kernel oops, and panics during network
+ * namespace cleanup.   So please don't get this wrong.
+ */
+extern int register_pernet_subsys(struct pernet_operations *);
+extern void unregister_pernet_subsys(struct pernet_operations *);
+extern int register_pernet_device(struct pernet_operations *);
+extern void unregister_pernet_device(struct pernet_operations *);
+
+struct ctl_path;
+struct ctl_table;
+struct ctl_table_header;
+
+extern struct ctl_table_header *register_net_sysctl_table(struct net *net,
+	const struct ctl_path *path, struct ctl_table *table);
+extern struct ctl_table_header *register_net_sysctl_rotable(
+	const struct ctl_path *path, struct ctl_table *table);
+extern void unregister_net_sysctl_table(struct ctl_table_header *header);
+
+#endif /* __NET_NET_NAMESPACE_H */
diff --git a/include/net/net_ratelimit.h b/include/net/net_ratelimit.h
new file mode 100644
index 00000000..7727b424
--- /dev/null
+++ b/include/net/net_ratelimit.h
@@ -0,0 +1,8 @@
+#ifndef _LINUX_NET_RATELIMIT_H
+#define _LINUX_NET_RATELIMIT_H
+
+#include <linux/ratelimit.h>
+
+extern struct ratelimit_state net_ratelimit_state;
+
+#endif	/* _LINUX_NET_RATELIMIT_H */
diff --git a/include/net/netdma.h b/include/net/netdma.h
new file mode 100644
index 00000000..8ba8ce28
--- /dev/null
+++ b/include/net/netdma.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright(c) 2004 - 2006 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called COPYING.
+ */
+#ifndef NETDMA_H
+#define NETDMA_H
+#ifdef CONFIG_NET_DMA
+#include <linux/dmaengine.h>
+#include <linux/skbuff.h>
+
+int dma_skb_copy_datagram_iovec(struct dma_chan* chan,
+		struct sk_buff *skb, int offset, struct iovec *to,
+		size_t len, struct dma_pinned_list *pinned_list);
+
+#endif /* CONFIG_NET_DMA */
+#endif /* NETDMA_H */
diff --git a/include/net/netevent.h b/include/net/netevent.h
new file mode 100644
index 00000000..086f8a5b
--- /dev/null
+++ b/include/net/netevent.h
@@ -0,0 +1,30 @@
+#ifndef _NET_EVENT_H
+#define _NET_EVENT_H
+
+/*
+ *	Generic netevent notifiers
+ *
+ *	Authors:
+ *      Tom Tucker              <tom@opengridcomputing.com>
+ *      Steve Wise              <swise@opengridcomputing.com>
+ *
+ * 	Changes:
+ */
+
+struct dst_entry;
+
+struct netevent_redirect {
+	struct dst_entry *old;
+	struct dst_entry *new;
+};
+
+enum netevent_notif_type {
+	NETEVENT_NEIGH_UPDATE = 1, /* arg is struct neighbour ptr */
+	NETEVENT_REDIRECT,	   /* arg is struct netevent_redirect ptr */
+};
+
+extern int register_netevent_notifier(struct notifier_block *nb);
+extern int unregister_netevent_notifier(struct notifier_block *nb);
+extern int call_netevent_notifiers(unsigned long val, void *v);
+
+#endif
diff --git a/include/net/netfilter/ipv4/nf_conntrack_ipv4.h b/include/net/netfilter/ipv4/nf_conntrack_ipv4.h
new file mode 100644
index 00000000..7573d52a
--- /dev/null
+++ b/include/net/netfilter/ipv4/nf_conntrack_ipv4.h
@@ -0,0 +1,24 @@
+/*
+ * IPv4 support for nf_conntrack.
+ *
+ * 23 Mar 2004: Yasuyuki Kozakai @ USAGI <yasuyuki.kozakai@toshiba.co.jp>
+ *	- move L3 protocol dependent part from include/linux/netfilter_ipv4/
+ *	  ip_conntarck.h
+ */
+
+#ifndef _NF_CONNTRACK_IPV4_H
+#define _NF_CONNTRACK_IPV4_H
+
+
+extern struct nf_conntrack_l3proto nf_conntrack_l3proto_ipv4;
+
+extern struct nf_conntrack_l4proto nf_conntrack_l4proto_tcp4;
+extern struct nf_conntrack_l4proto nf_conntrack_l4proto_udp4;
+extern struct nf_conntrack_l4proto nf_conntrack_l4proto_icmp;
+
+extern int nf_conntrack_ipv4_compat_init(void);
+extern void nf_conntrack_ipv4_compat_fini(void);
+
+extern void need_ipv4_conntrack(void);
+
+#endif /*_NF_CONNTRACK_IPV4_H*/
diff --git a/include/net/netfilter/ipv4/nf_defrag_ipv4.h b/include/net/netfilter/ipv4/nf_defrag_ipv4.h
new file mode 100644
index 00000000..6b00ea38
--- /dev/null
+++ b/include/net/netfilter/ipv4/nf_defrag_ipv4.h
@@ -0,0 +1,6 @@
+#ifndef _NF_DEFRAG_IPV4_H
+#define _NF_DEFRAG_IPV4_H
+
+extern void nf_defrag_ipv4_enable(void);
+
+#endif /* _NF_DEFRAG_IPV4_H */
diff --git a/include/net/netfilter/ipv6/nf_conntrack_icmpv6.h b/include/net/netfilter/ipv6/nf_conntrack_icmpv6.h
new file mode 100644
index 00000000..67edd50a
--- /dev/null
+++ b/include/net/netfilter/ipv6/nf_conntrack_icmpv6.h
@@ -0,0 +1,20 @@
+/*
+ * ICMPv6 tracking.
+ *
+ * 21 Apl 2004: Yasuyuki Kozakai @USAGI <yasuyuki.kozakai@toshiba.co.jp>
+ *	- separated from nf_conntrack_icmp.h
+ *
+ * Derived from include/linux/netfiter_ipv4/ip_conntrack_icmp.h
+ */
+
+#ifndef _NF_CONNTRACK_ICMPV6_H
+#define _NF_CONNTRACK_ICMPV6_H
+
+#ifndef ICMPV6_NI_QUERY
+#define ICMPV6_NI_QUERY 139
+#endif
+#ifndef ICMPV6_NI_REPLY
+#define ICMPV6_NI_REPLY 140
+#endif
+
+#endif /* _NF_CONNTRACK_ICMPV6_H */
diff --git a/include/net/netfilter/ipv6/nf_conntrack_ipv6.h b/include/net/netfilter/ipv6/nf_conntrack_ipv6.h
new file mode 100644
index 00000000..a4c99368
--- /dev/null
+++ b/include/net/netfilter/ipv6/nf_conntrack_ipv6.h
@@ -0,0 +1,13 @@
+#ifndef _NF_CONNTRACK_IPV6_H
+#define _NF_CONNTRACK_IPV6_H
+
+extern struct nf_conntrack_l3proto nf_conntrack_l3proto_ipv6;
+
+extern struct nf_conntrack_l4proto nf_conntrack_l4proto_tcp6;
+extern struct nf_conntrack_l4proto nf_conntrack_l4proto_udp6;
+extern struct nf_conntrack_l4proto nf_conntrack_l4proto_icmpv6;
+
+#include <linux/sysctl.h>
+extern struct ctl_table nf_ct_ipv6_sysctl_table[];
+
+#endif /* _NF_CONNTRACK_IPV6_H*/
diff --git a/include/net/netfilter/ipv6/nf_defrag_ipv6.h b/include/net/netfilter/ipv6/nf_defrag_ipv6.h
new file mode 100644
index 00000000..fd79c9a1
--- /dev/null
+++ b/include/net/netfilter/ipv6/nf_defrag_ipv6.h
@@ -0,0 +1,16 @@
+#ifndef _NF_DEFRAG_IPV6_H
+#define _NF_DEFRAG_IPV6_H
+
+extern void nf_defrag_ipv6_enable(void);
+
+extern int nf_ct_frag6_init(void);
+extern void nf_ct_frag6_cleanup(void);
+extern struct sk_buff *nf_ct_frag6_gather(struct sk_buff *skb, u32 user);
+extern void nf_ct_frag6_output(unsigned int hooknum, struct sk_buff *skb,
+			       struct net_device *in,
+			       struct net_device *out,
+			       int (*okfn)(struct sk_buff *));
+
+struct inet_frags_ctl;
+
+#endif /* _NF_DEFRAG_IPV6_H */
diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h
new file mode 100644
index 00000000..ab86036b
--- /dev/null
+++ b/include/net/netfilter/nf_conntrack.h
@@ -0,0 +1,336 @@
+/*
+ * Connection state tracking for netfilter.  This is separated from,
+ * but required by, the (future) NAT layer; it can also be used by an iptables
+ * extension.
+ *
+ * 16 Dec 2003: Yasuyuki Kozakai @USAGI <yasuyuki.kozakai@toshiba.co.jp>
+ *	- generalize L3 protocol dependent part.
+ *
+ * Derived from include/linux/netfiter_ipv4/ip_conntrack.h
+ */
+
+#ifndef _NF_CONNTRACK_H
+#define _NF_CONNTRACK_H
+
+#include <linux/netfilter/nf_conntrack_common.h>
+
+#include <linux/bitops.h>
+#include <linux/compiler.h>
+#include <linux/atomic.h>
+
+#include <linux/netfilter/nf_conntrack_tcp.h>
+#include <linux/netfilter/nf_conntrack_dccp.h>
+#include <linux/netfilter/nf_conntrack_sctp.h>
+#include <linux/netfilter/nf_conntrack_proto_gre.h>
+#include <net/netfilter/ipv6/nf_conntrack_icmpv6.h>
+
+#include <net/netfilter/nf_conntrack_tuple.h>
+
+/* per conntrack: protocol private data */
+union nf_conntrack_proto {
+	/* insert conntrack proto private data here */
+	struct nf_ct_dccp dccp;
+	struct ip_ct_sctp sctp;
+	struct ip_ct_tcp tcp;
+	struct nf_ct_gre gre;
+};
+
+union nf_conntrack_expect_proto {
+	/* insert expect proto private data here */
+};
+
+/* Add protocol helper include file here */
+#include <linux/netfilter/nf_conntrack_ftp.h>
+#include <linux/netfilter/nf_conntrack_pptp.h>
+#include <linux/netfilter/nf_conntrack_h323.h>
+#include <linux/netfilter/nf_conntrack_sane.h>
+#include <linux/netfilter/nf_conntrack_sip.h>
+
+/* per conntrack: application helper private data */
+union nf_conntrack_help {
+	/* insert conntrack helper private data (master) here */
+#if defined(CONFIG_NF_CONNTRACK_FTP) || defined(CONFIG_NF_CONNTRACK_FTP_MODULE)
+	struct nf_ct_ftp_master ct_ftp_info;
+#endif
+#if defined(CONFIG_NF_CONNTRACK_PPTP) || \
+    defined(CONFIG_NF_CONNTRACK_PPTP_MODULE)
+	struct nf_ct_pptp_master ct_pptp_info;
+#endif
+#if defined(CONFIG_NF_CONNTRACK_H323) || \
+    defined(CONFIG_NF_CONNTRACK_H323_MODULE)
+	struct nf_ct_h323_master ct_h323_info;
+#endif
+#if defined(CONFIG_NF_CONNTRACK_SANE) || \
+    defined(CONFIG_NF_CONNTRACK_SANE_MODULE)
+	struct nf_ct_sane_master ct_sane_info;
+#endif
+#if defined(CONFIG_NF_CONNTRACK_SIP) || defined(CONFIG_NF_CONNTRACK_SIP_MODULE)
+	struct nf_ct_sip_master ct_sip_info;
+#endif
+};
+
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/timer.h>
+
+#ifdef CONFIG_NETFILTER_DEBUG
+#define NF_CT_ASSERT(x)		WARN_ON(!(x))
+#else
+#define NF_CT_ASSERT(x)
+#endif
+
+struct nf_conntrack_helper;
+
+/* Must be kept in sync with the classes defined by helpers */
+#define NF_CT_MAX_EXPECT_CLASSES	4
+
+/* nf_conn feature for connections that have a helper */
+struct nf_conn_help {
+	/* Helper. if any */
+	struct nf_conntrack_helper __rcu *helper;
+
+	union nf_conntrack_help help;
+
+	struct hlist_head expectations;
+
+	/* Current number of expected connections */
+	u8 expecting[NF_CT_MAX_EXPECT_CLASSES];
+};
+
+#include <net/netfilter/ipv4/nf_conntrack_ipv4.h>
+#include <net/netfilter/ipv6/nf_conntrack_ipv6.h>
+
+struct nf_conn {
+	/* Usage count in here is 1 for hash table/destruct timer, 1 per skb,
+           plus 1 for any connection(s) we are `master' for */
+	struct nf_conntrack ct_general;
+
+	spinlock_t lock;
+
+	/* XXX should I move this to the tail ? - Y.K */
+	/* These are my tuples; original and reply */
+	struct nf_conntrack_tuple_hash tuplehash[IP_CT_DIR_MAX];
+
+	/* Have we seen traffic both ways yet? (bitset) */
+	unsigned long status;
+
+	/* If we were expected by an expectation, this will be it */
+	struct nf_conn *master;
+
+	/* Timer function; drops refcnt when it goes off. */
+	struct timer_list timeout;
+
+#if defined(CONFIG_NF_CONNTRACK_MARK)
+	u_int32_t mark;
+#endif
+
+#ifdef CONFIG_NF_CONNTRACK_SECMARK
+	u_int32_t secmark;
+#endif
+
+	/* Extensions */
+	struct nf_ct_ext *ext;
+#ifdef CONFIG_NET_NS
+	struct net *ct_net;
+#endif
+
+	/* Storage reserved for other modules, must be the last member */
+	union nf_conntrack_proto proto;
+};
+
+static inline struct nf_conn *
+nf_ct_tuplehash_to_ctrack(const struct nf_conntrack_tuple_hash *hash)
+{
+	return container_of(hash, struct nf_conn,
+			    tuplehash[hash->tuple.dst.dir]);
+}
+
+static inline u_int16_t nf_ct_l3num(const struct nf_conn *ct)
+{
+	return ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.l3num;
+}
+
+static inline u_int8_t nf_ct_protonum(const struct nf_conn *ct)
+{
+	return ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.protonum;
+}
+
+#define nf_ct_tuple(ct, dir) (&(ct)->tuplehash[dir].tuple)
+
+/* get master conntrack via master expectation */
+#define master_ct(conntr) (conntr->master)
+
+extern struct net init_net;
+
+static inline struct net *nf_ct_net(const struct nf_conn *ct)
+{
+	return read_pnet(&ct->ct_net);
+}
+
+/* Alter reply tuple (maybe alter helper). */
+extern void
+nf_conntrack_alter_reply(struct nf_conn *ct,
+			 const struct nf_conntrack_tuple *newreply);
+
+/* Is this tuple taken? (ignoring any belonging to the given
+   conntrack). */
+extern int
+nf_conntrack_tuple_taken(const struct nf_conntrack_tuple *tuple,
+			 const struct nf_conn *ignored_conntrack);
+
+/* Return conntrack_info and tuple hash for given skb. */
+static inline struct nf_conn *
+nf_ct_get(const struct sk_buff *skb, enum ip_conntrack_info *ctinfo)
+{
+	*ctinfo = skb->nfctinfo;
+	return (struct nf_conn *)skb->nfct;
+}
+
+/* decrement reference count on a conntrack */
+static inline void nf_ct_put(struct nf_conn *ct)
+{
+	NF_CT_ASSERT(ct);
+	nf_conntrack_put(&ct->ct_general);
+}
+
+/* Protocol module loading */
+extern int nf_ct_l3proto_try_module_get(unsigned short l3proto);
+extern void nf_ct_l3proto_module_put(unsigned short l3proto);
+
+/*
+ * Allocate a hashtable of hlist_head (if nulls == 0),
+ * or hlist_nulls_head (if nulls == 1)
+ */
+extern void *nf_ct_alloc_hashtable(unsigned int *sizep, int nulls);
+
+extern void nf_ct_free_hashtable(void *hash, unsigned int size);
+
+extern struct nf_conntrack_tuple_hash *
+__nf_conntrack_find(struct net *net, u16 zone,
+		    const struct nf_conntrack_tuple *tuple);
+
+extern int nf_conntrack_hash_check_insert(struct nf_conn *ct);
+extern void nf_ct_delete_from_lists(struct nf_conn *ct);
+extern void nf_ct_insert_dying_list(struct nf_conn *ct);
+
+extern void nf_conntrack_flush_report(struct net *net, u32 pid, int report);
+
+extern bool nf_ct_get_tuplepr(const struct sk_buff *skb,
+			      unsigned int nhoff, u_int16_t l3num,
+			      struct nf_conntrack_tuple *tuple);
+extern bool nf_ct_invert_tuplepr(struct nf_conntrack_tuple *inverse,
+				 const struct nf_conntrack_tuple *orig);
+
+extern void __nf_ct_refresh_acct(struct nf_conn *ct,
+				 enum ip_conntrack_info ctinfo,
+				 const struct sk_buff *skb,
+				 unsigned long extra_jiffies,
+				 int do_acct);
+
+/* Refresh conntrack for this many jiffies and do accounting */
+static inline void nf_ct_refresh_acct(struct nf_conn *ct,
+				      enum ip_conntrack_info ctinfo,
+				      const struct sk_buff *skb,
+				      unsigned long extra_jiffies)
+{
+	__nf_ct_refresh_acct(ct, ctinfo, skb, extra_jiffies, 1);
+}
+
+/* Refresh conntrack for this many jiffies */
+static inline void nf_ct_refresh(struct nf_conn *ct,
+				 const struct sk_buff *skb,
+				 unsigned long extra_jiffies)
+{
+	__nf_ct_refresh_acct(ct, 0, skb, extra_jiffies, 0);
+}
+
+extern bool __nf_ct_kill_acct(struct nf_conn *ct,
+			      enum ip_conntrack_info ctinfo,
+			      const struct sk_buff *skb,
+			      int do_acct);
+
+/* kill conntrack and do accounting */
+static inline bool nf_ct_kill_acct(struct nf_conn *ct,
+				   enum ip_conntrack_info ctinfo,
+				   const struct sk_buff *skb)
+{
+	return __nf_ct_kill_acct(ct, ctinfo, skb, 1);
+}
+
+/* kill conntrack without accounting */
+static inline bool nf_ct_kill(struct nf_conn *ct)
+{
+	return __nf_ct_kill_acct(ct, 0, NULL, 0);
+}
+
+/* These are for NAT.  Icky. */
+extern s16 (*nf_ct_nat_offset)(const struct nf_conn *ct,
+			       enum ip_conntrack_dir dir,
+			       u32 seq);
+
+/* Fake conntrack entry for untracked connections */
+DECLARE_PER_CPU(struct nf_conn, nf_conntrack_untracked);
+static inline struct nf_conn *nf_ct_untracked_get(void)
+{
+	return &__raw_get_cpu_var(nf_conntrack_untracked);
+}
+extern void nf_ct_untracked_status_or(unsigned long bits);
+
+/* Iterate over all conntracks: if iter returns true, it's deleted. */
+extern void
+nf_ct_iterate_cleanup(struct net *net, int (*iter)(struct nf_conn *i, void *data), void *data);
+extern void nf_conntrack_free(struct nf_conn *ct);
+extern struct nf_conn *
+nf_conntrack_alloc(struct net *net, u16 zone,
+		   const struct nf_conntrack_tuple *orig,
+		   const struct nf_conntrack_tuple *repl,
+		   gfp_t gfp);
+
+static inline int nf_ct_is_template(const struct nf_conn *ct)
+{
+	return test_bit(IPS_TEMPLATE_BIT, &ct->status);
+}
+
+/* It's confirmed if it is, or has been in the hash table. */
+static inline int nf_ct_is_confirmed(struct nf_conn *ct)
+{
+	return test_bit(IPS_CONFIRMED_BIT, &ct->status);
+}
+
+static inline int nf_ct_is_dying(struct nf_conn *ct)
+{
+	return test_bit(IPS_DYING_BIT, &ct->status);
+}
+
+static inline int nf_ct_is_untracked(const struct nf_conn *ct)
+{
+	return test_bit(IPS_UNTRACKED_BIT, &ct->status);
+}
+
+/* Packet is received from loopback */
+static inline bool nf_is_loopback_packet(const struct sk_buff *skb)
+{
+	return skb->dev && skb->skb_iif && skb->dev->flags & IFF_LOOPBACK;
+}
+
+struct kernel_param;
+
+extern int nf_conntrack_set_hashsize(const char *val, struct kernel_param *kp);
+extern unsigned int nf_conntrack_htable_size;
+extern unsigned int nf_conntrack_max;
+extern unsigned int nf_conntrack_hash_rnd;
+void init_nf_conntrack_hash_rnd(void);
+
+#define NF_CT_STAT_INC(net, count)	\
+	__this_cpu_inc((net)->ct.stat->count)
+#define NF_CT_STAT_INC_ATOMIC(net, count)		\
+do {							\
+	local_bh_disable();				\
+	__this_cpu_inc((net)->ct.stat->count);		\
+	local_bh_enable();				\
+} while (0)
+
+#define MODULE_ALIAS_NFCT_HELPER(helper) \
+        MODULE_ALIAS("nfct-helper-" helper)
+
+#endif /* _NF_CONNTRACK_H */
diff --git a/include/net/netfilter/nf_conntrack_acct.h b/include/net/netfilter/nf_conntrack_acct.h
new file mode 100644
index 00000000..463ae8e1
--- /dev/null
+++ b/include/net/netfilter/nf_conntrack_acct.h
@@ -0,0 +1,63 @@
+/*
+ * (C) 2008 Krzysztof Piotr Oledzki <ole@ans.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _NF_CONNTRACK_ACCT_H
+#define _NF_CONNTRACK_ACCT_H
+#include <net/net_namespace.h>
+#include <linux/netfilter/nf_conntrack_common.h>
+#include <linux/netfilter/nf_conntrack_tuple_common.h>
+#include <net/netfilter/nf_conntrack.h>
+#include <net/netfilter/nf_conntrack_extend.h>
+
+struct nf_conn_counter {
+	atomic64_t packets;
+	atomic64_t bytes;
+};
+
+static inline
+struct nf_conn_counter *nf_conn_acct_find(const struct nf_conn *ct)
+{
+	return nf_ct_ext_find(ct, NF_CT_EXT_ACCT);
+}
+
+static inline
+struct nf_conn_counter *nf_ct_acct_ext_add(struct nf_conn *ct, gfp_t gfp)
+{
+	struct net *net = nf_ct_net(ct);
+	struct nf_conn_counter *acct;
+
+	if (!net->ct.sysctl_acct)
+		return NULL;
+
+	acct = nf_ct_ext_add(ct, NF_CT_EXT_ACCT, gfp);
+	if (!acct)
+		pr_debug("failed to add accounting extension area");
+
+
+	return acct;
+};
+
+extern unsigned int
+seq_print_acct(struct seq_file *s, const struct nf_conn *ct, int dir);
+
+/* Check if connection tracking accounting is enabled */
+static inline bool nf_ct_acct_enabled(struct net *net)
+{
+	return net->ct.sysctl_acct != 0;
+}
+
+/* Enable/disable connection tracking accounting */
+static inline void nf_ct_set_acct(struct net *net, bool enable)
+{
+	net->ct.sysctl_acct = enable;
+}
+
+extern int nf_conntrack_acct_init(struct net *net);
+extern void nf_conntrack_acct_fini(struct net *net);
+
+#endif /* _NF_CONNTRACK_ACCT_H */
diff --git a/include/net/netfilter/nf_conntrack_core.h b/include/net/netfilter/nf_conntrack_core.h
new file mode 100644
index 00000000..aced0851
--- /dev/null
+++ b/include/net/netfilter/nf_conntrack_core.h
@@ -0,0 +1,79 @@
+/*
+ * This header is used to share core functionality between the
+ * standalone connection tracking module, and the compatibility layer's use
+ * of connection tracking.
+ *
+ * 16 Dec 2003: Yasuyuki Kozakai @USAGI <yasuyuki.kozakai@toshiba.co.jp>
+ *	- generalize L3 protocol dependent part.
+ *
+ * Derived from include/linux/netfiter_ipv4/ip_conntrack_core.h
+ */
+
+#ifndef _NF_CONNTRACK_CORE_H
+#define _NF_CONNTRACK_CORE_H
+
+#include <linux/netfilter.h>
+#include <net/netfilter/nf_conntrack_l3proto.h>
+#include <net/netfilter/nf_conntrack_l4proto.h>
+#include <net/netfilter/nf_conntrack_ecache.h>
+
+/* This header is used to share core functionality between the
+   standalone connection tracking module, and the compatibility layer's use
+   of connection tracking. */
+extern unsigned int nf_conntrack_in(struct net *net,
+				    u_int8_t pf,
+				    unsigned int hooknum,
+				    struct sk_buff *skb);
+
+extern int nf_conntrack_init(struct net *net);
+extern void nf_conntrack_cleanup(struct net *net);
+
+extern int nf_conntrack_proto_init(void);
+extern void nf_conntrack_proto_fini(void);
+
+extern bool
+nf_ct_get_tuple(const struct sk_buff *skb,
+		unsigned int nhoff,
+		unsigned int dataoff,
+		u_int16_t l3num,
+		u_int8_t protonum,
+		struct nf_conntrack_tuple *tuple,
+		const struct nf_conntrack_l3proto *l3proto,
+		const struct nf_conntrack_l4proto *l4proto);
+
+extern bool
+nf_ct_invert_tuple(struct nf_conntrack_tuple *inverse,
+		   const struct nf_conntrack_tuple *orig,
+		   const struct nf_conntrack_l3proto *l3proto,
+		   const struct nf_conntrack_l4proto *l4proto);
+
+/* Find a connection corresponding to a tuple. */
+extern struct nf_conntrack_tuple_hash *
+nf_conntrack_find_get(struct net *net, u16 zone,
+		      const struct nf_conntrack_tuple *tuple);
+
+extern int __nf_conntrack_confirm(struct sk_buff *skb);
+
+/* Confirm a connection: returns NF_DROP if packet must be dropped. */
+static inline int nf_conntrack_confirm(struct sk_buff *skb)
+{
+	struct nf_conn *ct = (struct nf_conn *)skb->nfct;
+	int ret = NF_ACCEPT;
+
+	if (ct && !nf_ct_is_untracked(ct)) {
+		if (!nf_ct_is_confirmed(ct))
+			ret = __nf_conntrack_confirm(skb);
+		if (likely(ret == NF_ACCEPT))
+			nf_ct_deliver_cached_events(ct);
+	}
+	return ret;
+}
+
+int
+print_tuple(struct seq_file *s, const struct nf_conntrack_tuple *tuple,
+            const struct nf_conntrack_l3proto *l3proto,
+            const struct nf_conntrack_l4proto *proto);
+
+extern spinlock_t nf_conntrack_lock ;
+
+#endif /* _NF_CONNTRACK_CORE_H */
diff --git a/include/net/netfilter/nf_conntrack_ecache.h b/include/net/netfilter/nf_conntrack_ecache.h
new file mode 100644
index 00000000..a88fb693
--- /dev/null
+++ b/include/net/netfilter/nf_conntrack_ecache.h
@@ -0,0 +1,245 @@
+/*
+ * connection tracking event cache.
+ */
+
+#ifndef _NF_CONNTRACK_ECACHE_H
+#define _NF_CONNTRACK_ECACHE_H
+#include <net/netfilter/nf_conntrack.h>
+
+#include <net/net_namespace.h>
+#include <net/netfilter/nf_conntrack_expect.h>
+#include <linux/netfilter/nf_conntrack_common.h>
+#include <linux/netfilter/nf_conntrack_tuple_common.h>
+#include <net/netfilter/nf_conntrack_extend.h>
+
+struct nf_conntrack_ecache {
+	unsigned long cache;	/* bitops want long */
+	unsigned long missed;	/* missed events */
+	u16 ctmask;		/* bitmask of ct events to be delivered */
+	u16 expmask;		/* bitmask of expect events to be delivered */
+	u32 pid;		/* netlink pid of destroyer */
+};
+
+static inline struct nf_conntrack_ecache *
+nf_ct_ecache_find(const struct nf_conn *ct)
+{
+#ifdef CONFIG_NF_CONNTRACK_EVENTS
+	return nf_ct_ext_find(ct, NF_CT_EXT_ECACHE);
+#else
+	return NULL;
+#endif
+}
+
+static inline struct nf_conntrack_ecache *
+nf_ct_ecache_ext_add(struct nf_conn *ct, u16 ctmask, u16 expmask, gfp_t gfp)
+{
+#ifdef CONFIG_NF_CONNTRACK_EVENTS
+	struct net *net = nf_ct_net(ct);
+	struct nf_conntrack_ecache *e;
+
+	if (!ctmask && !expmask && net->ct.sysctl_events) {
+		ctmask = ~0;
+		expmask = ~0;
+	}
+	if (!ctmask && !expmask)
+		return NULL;
+
+	e = nf_ct_ext_add(ct, NF_CT_EXT_ECACHE, gfp);
+	if (e) {
+		e->ctmask  = ctmask;
+		e->expmask = expmask;
+	}
+	return e;
+#else
+	return NULL;
+#endif
+};
+
+#ifdef CONFIG_NF_CONNTRACK_EVENTS
+/* This structure is passed to event handler */
+struct nf_ct_event {
+	struct nf_conn *ct;
+	u32 pid;
+	int report;
+};
+
+struct nf_ct_event_notifier {
+	int (*fcn)(unsigned int events, struct nf_ct_event *item);
+};
+
+extern int nf_conntrack_register_notifier(struct net *net, struct nf_ct_event_notifier *nb);
+extern void nf_conntrack_unregister_notifier(struct net *net, struct nf_ct_event_notifier *nb);
+
+extern void nf_ct_deliver_cached_events(struct nf_conn *ct);
+
+static inline void
+nf_conntrack_event_cache(enum ip_conntrack_events event, struct nf_conn *ct)
+{
+	struct net *net = nf_ct_net(ct);
+	struct nf_conntrack_ecache *e;
+
+	if (net->ct.nf_conntrack_event_cb == NULL)
+		return;
+
+	e = nf_ct_ecache_find(ct);
+	if (e == NULL)
+		return;
+
+	set_bit(event, &e->cache);
+}
+
+static inline int
+nf_conntrack_eventmask_report(unsigned int eventmask,
+			      struct nf_conn *ct,
+			      u32 pid,
+			      int report)
+{
+	int ret = 0;
+	struct net *net = nf_ct_net(ct);
+	struct nf_ct_event_notifier *notify;
+	struct nf_conntrack_ecache *e;
+
+	rcu_read_lock();
+	notify = rcu_dereference(net->ct.nf_conntrack_event_cb);
+	if (notify == NULL)
+		goto out_unlock;
+
+	e = nf_ct_ecache_find(ct);
+	if (e == NULL)
+		goto out_unlock;
+
+	if (nf_ct_is_confirmed(ct) && !nf_ct_is_dying(ct)) {
+		struct nf_ct_event item = {
+			.ct 	= ct,
+			.pid	= e->pid ? e->pid : pid,
+			.report = report
+		};
+		/* This is a resent of a destroy event? If so, skip missed */
+		unsigned long missed = e->pid ? 0 : e->missed;
+
+		if (!((eventmask | missed) & e->ctmask))
+			goto out_unlock;
+
+		ret = notify->fcn(eventmask | missed, &item);
+		if (unlikely(ret < 0 || missed)) {
+			spin_lock_bh(&ct->lock);
+			if (ret < 0) {
+				/* This is a destroy event that has been
+				 * triggered by a process, we store the PID
+				 * to include it in the retransmission. */
+				if (eventmask & (1 << IPCT_DESTROY) &&
+				    e->pid == 0 && pid != 0)
+					e->pid = pid;
+				else
+					e->missed |= eventmask;
+			} else
+				e->missed &= ~missed;
+			spin_unlock_bh(&ct->lock);
+		}
+	}
+out_unlock:
+	rcu_read_unlock();
+	return ret;
+}
+
+static inline int
+nf_conntrack_event_report(enum ip_conntrack_events event, struct nf_conn *ct,
+			  u32 pid, int report)
+{
+	return nf_conntrack_eventmask_report(1 << event, ct, pid, report);
+}
+
+static inline int
+nf_conntrack_event(enum ip_conntrack_events event, struct nf_conn *ct)
+{
+	return nf_conntrack_eventmask_report(1 << event, ct, 0, 0);
+}
+
+struct nf_exp_event {
+	struct nf_conntrack_expect *exp;
+	u32 pid;
+	int report;
+};
+
+struct nf_exp_event_notifier {
+	int (*fcn)(unsigned int events, struct nf_exp_event *item);
+};
+
+extern int nf_ct_expect_register_notifier(struct net *net, struct nf_exp_event_notifier *nb);
+extern void nf_ct_expect_unregister_notifier(struct net *net, struct nf_exp_event_notifier *nb);
+
+static inline void
+nf_ct_expect_event_report(enum ip_conntrack_expect_events event,
+			  struct nf_conntrack_expect *exp,
+			  u32 pid,
+			  int report)
+{
+	struct net *net = nf_ct_exp_net(exp);
+	struct nf_exp_event_notifier *notify;
+	struct nf_conntrack_ecache *e;
+
+	rcu_read_lock();
+	notify = rcu_dereference(net->ct.nf_expect_event_cb);
+	if (notify == NULL)
+		goto out_unlock;
+
+	e = nf_ct_ecache_find(exp->master);
+	if (e == NULL)
+		goto out_unlock;
+
+	if (e->expmask & (1 << event)) {
+		struct nf_exp_event item = {
+			.exp	= exp,
+			.pid	= pid,
+			.report = report
+		};
+		notify->fcn(1 << event, &item);
+	}
+out_unlock:
+	rcu_read_unlock();
+}
+
+static inline void
+nf_ct_expect_event(enum ip_conntrack_expect_events event,
+		   struct nf_conntrack_expect *exp)
+{
+	nf_ct_expect_event_report(event, exp, 0, 0);
+}
+
+extern int nf_conntrack_ecache_init(struct net *net);
+extern void nf_conntrack_ecache_fini(struct net *net);
+
+#else /* CONFIG_NF_CONNTRACK_EVENTS */
+
+static inline void nf_conntrack_event_cache(enum ip_conntrack_events event,
+					    struct nf_conn *ct) {}
+static inline int nf_conntrack_eventmask_report(unsigned int eventmask,
+						struct nf_conn *ct,
+						u32 pid,
+						int report) { return 0; }
+static inline int nf_conntrack_event(enum ip_conntrack_events event,
+				     struct nf_conn *ct) { return 0; }
+static inline int nf_conntrack_event_report(enum ip_conntrack_events event,
+					    struct nf_conn *ct,
+					    u32 pid,
+					    int report) { return 0; }
+static inline void nf_ct_deliver_cached_events(const struct nf_conn *ct) {}
+static inline void nf_ct_expect_event(enum ip_conntrack_expect_events event,
+				      struct nf_conntrack_expect *exp) {}
+static inline void nf_ct_expect_event_report(enum ip_conntrack_expect_events e,
+					     struct nf_conntrack_expect *exp,
+ 					     u32 pid,
+ 					     int report) {}
+
+static inline int nf_conntrack_ecache_init(struct net *net)
+{
+	return 0;
+}
+
+static inline void nf_conntrack_ecache_fini(struct net *net)
+{
+}
+#endif /* CONFIG_NF_CONNTRACK_EVENTS */
+
+#endif /*_NF_CONNTRACK_ECACHE_H*/
+
diff --git a/include/net/netfilter/nf_conntrack_expect.h b/include/net/netfilter/nf_conntrack_expect.h
new file mode 100644
index 00000000..4619caad
--- /dev/null
+++ b/include/net/netfilter/nf_conntrack_expect.h
@@ -0,0 +1,111 @@
+/*
+ * connection tracking expectations.
+ */
+
+#ifndef _NF_CONNTRACK_EXPECT_H
+#define _NF_CONNTRACK_EXPECT_H
+#include <net/netfilter/nf_conntrack.h>
+
+extern unsigned int nf_ct_expect_hsize;
+extern unsigned int nf_ct_expect_max;
+
+struct nf_conntrack_expect {
+	/* Conntrack expectation list member */
+	struct hlist_node lnode;
+
+	/* Hash member */
+	struct hlist_node hnode;
+
+	/* We expect this tuple, with the following mask */
+	struct nf_conntrack_tuple tuple;
+	struct nf_conntrack_tuple_mask mask;
+
+	/* Function to call after setup and insertion */
+	void (*expectfn)(struct nf_conn *new,
+			 struct nf_conntrack_expect *this);
+
+	/* Helper to assign to new connection */
+	struct nf_conntrack_helper *helper;
+
+	/* The conntrack of the master connection */
+	struct nf_conn *master;
+
+	/* Timer function; deletes the expectation. */
+	struct timer_list timeout;
+
+	/* Usage count. */
+	atomic_t use;
+
+	/* Flags */
+	unsigned int flags;
+
+	/* Expectation class */
+	unsigned int class;
+
+#ifdef CONFIG_NF_NAT_NEEDED
+	__be32 saved_ip;
+	/* This is the original per-proto part, used to map the
+	 * expected connection the way the recipient expects. */
+	union nf_conntrack_man_proto saved_proto;
+	/* Direction relative to the master connection. */
+	enum ip_conntrack_dir dir;
+#endif
+
+	struct rcu_head rcu;
+};
+
+static inline struct net *nf_ct_exp_net(struct nf_conntrack_expect *exp)
+{
+	return nf_ct_net(exp->master);
+}
+
+struct nf_conntrack_expect_policy {
+	unsigned int	max_expected;
+	unsigned int	timeout;
+	const char	*name;
+};
+
+#define NF_CT_EXPECT_CLASS_DEFAULT	0
+
+int nf_conntrack_expect_init(struct net *net);
+void nf_conntrack_expect_fini(struct net *net);
+
+struct nf_conntrack_expect *
+__nf_ct_expect_find(struct net *net, u16 zone,
+		    const struct nf_conntrack_tuple *tuple);
+
+struct nf_conntrack_expect *
+nf_ct_expect_find_get(struct net *net, u16 zone,
+		      const struct nf_conntrack_tuple *tuple);
+
+struct nf_conntrack_expect *
+nf_ct_find_expectation(struct net *net, u16 zone,
+		       const struct nf_conntrack_tuple *tuple);
+
+void nf_ct_unlink_expect_report(struct nf_conntrack_expect *exp,
+				u32 pid, int report);
+static inline void nf_ct_unlink_expect(struct nf_conntrack_expect *exp)
+{
+	nf_ct_unlink_expect_report(exp, 0, 0);
+}
+
+void nf_ct_remove_expectations(struct nf_conn *ct);
+void nf_ct_unexpect_related(struct nf_conntrack_expect *exp);
+
+/* Allocate space for an expectation: this is mandatory before calling
+   nf_ct_expect_related.  You will have to call put afterwards. */
+struct nf_conntrack_expect *nf_ct_expect_alloc(struct nf_conn *me);
+void nf_ct_expect_init(struct nf_conntrack_expect *, unsigned int, u_int8_t,
+		       const union nf_inet_addr *,
+		       const union nf_inet_addr *,
+		       u_int8_t, const __be16 *, const __be16 *);
+void nf_ct_expect_put(struct nf_conntrack_expect *exp);
+int nf_ct_expect_related_report(struct nf_conntrack_expect *expect, 
+				u32 pid, int report);
+static inline int nf_ct_expect_related(struct nf_conntrack_expect *expect)
+{
+	return nf_ct_expect_related_report(expect, 0, 0);
+}
+
+#endif /*_NF_CONNTRACK_EXPECT_H*/
+
diff --git a/include/net/netfilter/nf_conntrack_extend.h b/include/net/netfilter/nf_conntrack_extend.h
new file mode 100644
index 00000000..96755c37
--- /dev/null
+++ b/include/net/netfilter/nf_conntrack_extend.h
@@ -0,0 +1,110 @@
+#ifndef _NF_CONNTRACK_EXTEND_H
+#define _NF_CONNTRACK_EXTEND_H
+
+#include <linux/slab.h>
+
+#include <net/netfilter/nf_conntrack.h>
+
+enum nf_ct_ext_id {
+	NF_CT_EXT_HELPER,
+#if defined(CONFIG_NF_NAT) || defined(CONFIG_NF_NAT_MODULE)
+	NF_CT_EXT_NAT,
+#endif
+	NF_CT_EXT_ACCT,
+#ifdef CONFIG_NF_CONNTRACK_EVENTS
+	NF_CT_EXT_ECACHE,
+#endif
+#ifdef CONFIG_NF_CONNTRACK_ZONES
+	NF_CT_EXT_ZONE,
+#endif
+#ifdef CONFIG_NF_CONNTRACK_TIMESTAMP
+	NF_CT_EXT_TSTAMP,
+#endif
+#ifdef CONFIG_NF_CONNTRACK_TIMEOUT
+	NF_CT_EXT_TIMEOUT,
+#endif
+	NF_CT_EXT_NUM,
+};
+
+#define NF_CT_EXT_HELPER_TYPE struct nf_conn_help
+#define NF_CT_EXT_NAT_TYPE struct nf_conn_nat
+#define NF_CT_EXT_ACCT_TYPE struct nf_conn_counter
+#define NF_CT_EXT_ECACHE_TYPE struct nf_conntrack_ecache
+#define NF_CT_EXT_ZONE_TYPE struct nf_conntrack_zone
+#define NF_CT_EXT_TSTAMP_TYPE struct nf_conn_tstamp
+#define NF_CT_EXT_TIMEOUT_TYPE struct nf_conn_timeout
+
+/* Extensions: optional stuff which isn't permanently in struct. */
+struct nf_ct_ext {
+	struct rcu_head rcu;
+	u8 offset[NF_CT_EXT_NUM];
+	u8 len;
+	char data[0];
+};
+
+static inline bool __nf_ct_ext_exist(const struct nf_ct_ext *ext, u8 id)
+{
+	return !!ext->offset[id];
+}
+
+static inline bool nf_ct_ext_exist(const struct nf_conn *ct, u8 id)
+{
+	return (ct->ext && __nf_ct_ext_exist(ct->ext, id));
+}
+
+static inline void *__nf_ct_ext_find(const struct nf_conn *ct, u8 id)
+{
+	if (!nf_ct_ext_exist(ct, id))
+		return NULL;
+
+	return (void *)ct->ext + ct->ext->offset[id];
+}
+#define nf_ct_ext_find(ext, id)	\
+	((id##_TYPE *)__nf_ct_ext_find((ext), (id)))
+
+/* Destroy all relationships */
+extern void __nf_ct_ext_destroy(struct nf_conn *ct);
+static inline void nf_ct_ext_destroy(struct nf_conn *ct)
+{
+	if (ct->ext)
+		__nf_ct_ext_destroy(ct);
+}
+
+/* Free operation. If you want to free a object referred from private area,
+ * please implement __nf_ct_ext_free() and call it.
+ */
+static inline void nf_ct_ext_free(struct nf_conn *ct)
+{
+	if (ct->ext)
+		kfree(ct->ext);
+}
+
+/* Add this type, returns pointer to data or NULL. */
+void *
+__nf_ct_ext_add(struct nf_conn *ct, enum nf_ct_ext_id id, gfp_t gfp);
+#define nf_ct_ext_add(ct, id, gfp) \
+	((id##_TYPE *)__nf_ct_ext_add((ct), (id), (gfp)))
+
+#define NF_CT_EXT_F_PREALLOC	0x0001
+
+struct nf_ct_ext_type {
+	/* Destroys relationships (can be NULL). */
+	void (*destroy)(struct nf_conn *ct);
+	/* Called when realloacted (can be NULL).
+	   Contents has already been moved. */
+	void (*move)(void *new, void *old);
+
+	enum nf_ct_ext_id id;
+
+	unsigned int flags;
+
+	/* Length and min alignment. */
+	u8 len;
+	u8 align;
+	/* initial size of nf_ct_ext. */
+	u8 alloc_size;
+};
+
+int nf_ct_extend_register(struct nf_ct_ext_type *type);
+void nf_ct_extend_unregister(struct nf_ct_ext_type *type);
+#endif /* _NF_CONNTRACK_EXTEND_H */
diff --git a/include/net/netfilter/nf_conntrack_helper.h b/include/net/netfilter/nf_conntrack_helper.h
new file mode 100644
index 00000000..5767dc24
--- /dev/null
+++ b/include/net/netfilter/nf_conntrack_helper.h
@@ -0,0 +1,85 @@
+/*
+ * connection tracking helpers.
+ *
+ * 16 Dec 2003: Yasuyuki Kozakai @USAGI <yasuyuki.kozakai@toshiba.co.jp>
+ *	- generalize L3 protocol dependent part.
+ *
+ * Derived from include/linux/netfiter_ipv4/ip_conntrack_helper.h
+ */
+
+#ifndef _NF_CONNTRACK_HELPER_H
+#define _NF_CONNTRACK_HELPER_H
+#include <net/netfilter/nf_conntrack.h>
+#include <net/netfilter/nf_conntrack_extend.h>
+
+struct module;
+
+#define NF_CT_HELPER_NAME_LEN	16
+
+struct nf_conntrack_helper {
+	struct hlist_node hnode;	/* Internal use. */
+
+	const char *name;		/* name of the module */
+	struct module *me;		/* pointer to self */
+	const struct nf_conntrack_expect_policy *expect_policy;
+
+	/* Tuple of things we will help (compared against server response) */
+	struct nf_conntrack_tuple tuple;
+
+	/* Function to call when data passes; return verdict, or -1 to
+           invalidate. */
+	int (*help)(struct sk_buff *skb,
+		    unsigned int protoff,
+		    struct nf_conn *ct,
+		    enum ip_conntrack_info conntrackinfo);
+
+	void (*destroy)(struct nf_conn *ct);
+
+	int (*to_nlattr)(struct sk_buff *skb, const struct nf_conn *ct);
+	unsigned int expect_class_max;
+};
+
+extern struct nf_conntrack_helper *
+__nf_conntrack_helper_find(const char *name, u16 l3num, u8 protonum);
+
+extern struct nf_conntrack_helper *
+nf_conntrack_helper_try_module_get(const char *name, u16 l3num, u8 protonum);
+
+extern int nf_conntrack_helper_register(struct nf_conntrack_helper *);
+extern void nf_conntrack_helper_unregister(struct nf_conntrack_helper *);
+
+extern struct nf_conn_help *nf_ct_helper_ext_add(struct nf_conn *ct, gfp_t gfp);
+
+extern int __nf_ct_try_assign_helper(struct nf_conn *ct, struct nf_conn *tmpl,
+				     gfp_t flags);
+
+extern void nf_ct_helper_destroy(struct nf_conn *ct);
+
+static inline struct nf_conn_help *nfct_help(const struct nf_conn *ct)
+{
+	return nf_ct_ext_find(ct, NF_CT_EXT_HELPER);
+}
+
+extern int nf_conntrack_helper_init(void);
+extern void nf_conntrack_helper_fini(void);
+
+extern int nf_conntrack_broadcast_help(struct sk_buff *skb,
+				       unsigned int protoff,
+				       struct nf_conn *ct,
+				       enum ip_conntrack_info ctinfo,
+				       unsigned int timeout);
+
+struct nf_ct_helper_expectfn {
+	struct list_head head;
+	const char *name;
+	void (*expectfn)(struct nf_conn *ct, struct nf_conntrack_expect *exp);
+};
+
+void nf_ct_helper_expectfn_register(struct nf_ct_helper_expectfn *n);
+void nf_ct_helper_expectfn_unregister(struct nf_ct_helper_expectfn *n);
+struct nf_ct_helper_expectfn *
+nf_ct_helper_expectfn_find_by_name(const char *name);
+struct nf_ct_helper_expectfn *
+nf_ct_helper_expectfn_find_by_symbol(const void *symbol);
+
+#endif /*_NF_CONNTRACK_HELPER_H*/
diff --git a/include/net/netfilter/nf_conntrack_l3proto.h b/include/net/netfilter/nf_conntrack_l3proto.h
new file mode 100644
index 00000000..e8010f44
--- /dev/null
+++ b/include/net/netfilter/nf_conntrack_l3proto.h
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C)2003,2004 USAGI/WIDE Project
+ *
+ * Header for use in defining a given L3 protocol for connection tracking.
+ *
+ * Author:
+ *	Yasuyuki Kozakai @USAGI	<yasuyuki.kozakai@toshiba.co.jp>
+ *
+ * Derived from include/netfilter_ipv4/ip_conntrack_protocol.h
+ */
+
+#ifndef _NF_CONNTRACK_L3PROTO_H
+#define _NF_CONNTRACK_L3PROTO_H
+#include <linux/netlink.h>
+#include <net/netlink.h>
+#include <linux/seq_file.h>
+#include <net/netfilter/nf_conntrack.h>
+
+struct nf_conntrack_l3proto {
+	/* L3 Protocol Family number. ex) PF_INET */
+	u_int16_t l3proto;
+
+	/* Protocol name */
+	const char *name;
+
+	/*
+	 * Try to fill in the third arg: nhoff is offset of l3 proto
+         * hdr.  Return true if possible.
+	 */
+	bool (*pkt_to_tuple)(const struct sk_buff *skb, unsigned int nhoff,
+			     struct nf_conntrack_tuple *tuple);
+
+	/*
+	 * Invert the per-proto part of the tuple: ie. turn xmit into reply.
+	 * Some packets can't be inverted: return 0 in that case.
+	 */
+	bool (*invert_tuple)(struct nf_conntrack_tuple *inverse,
+			     const struct nf_conntrack_tuple *orig);
+
+	/* Print out the per-protocol part of the tuple. */
+	int (*print_tuple)(struct seq_file *s,
+			   const struct nf_conntrack_tuple *);
+
+	/*
+	 * Called before tracking. 
+	 *	*dataoff: offset of protocol header (TCP, UDP,...) in skb
+	 *	*protonum: protocol number
+	 */
+	int (*get_l4proto)(const struct sk_buff *skb, unsigned int nhoff,
+			   unsigned int *dataoff, u_int8_t *protonum);
+
+	int (*tuple_to_nlattr)(struct sk_buff *skb,
+			       const struct nf_conntrack_tuple *t);
+
+	/*
+	 * Calculate size of tuple nlattr
+	 */
+	int (*nlattr_tuple_size)(void);
+
+	int (*nlattr_to_tuple)(struct nlattr *tb[],
+			       struct nf_conntrack_tuple *t);
+	const struct nla_policy *nla_policy;
+
+	size_t nla_size;
+
+#ifdef CONFIG_SYSCTL
+	struct ctl_table_header	*ctl_table_header;
+	struct ctl_path		*ctl_table_path;
+	struct ctl_table	*ctl_table;
+#endif /* CONFIG_SYSCTL */
+
+	/* Module (if any) which this is connected to. */
+	struct module *me;
+};
+
+extern struct nf_conntrack_l3proto __rcu *nf_ct_l3protos[AF_MAX];
+
+/* Protocol registration. */
+extern int nf_conntrack_l3proto_register(struct nf_conntrack_l3proto *proto);
+extern void nf_conntrack_l3proto_unregister(struct nf_conntrack_l3proto *proto);
+extern struct nf_conntrack_l3proto *nf_ct_l3proto_find_get(u_int16_t l3proto);
+extern void nf_ct_l3proto_put(struct nf_conntrack_l3proto *p);
+
+/* Existing built-in protocols */
+extern struct nf_conntrack_l3proto nf_conntrack_l3proto_generic;
+
+static inline struct nf_conntrack_l3proto *
+__nf_ct_l3proto_find(u_int16_t l3proto)
+{
+	if (unlikely(l3proto >= AF_MAX))
+		return &nf_conntrack_l3proto_generic;
+	return rcu_dereference(nf_ct_l3protos[l3proto]);
+}
+
+#endif /*_NF_CONNTRACK_L3PROTO_H*/
diff --git a/include/net/netfilter/nf_conntrack_l4proto.h b/include/net/netfilter/nf_conntrack_l4proto.h
new file mode 100644
index 00000000..3b572bb2
--- /dev/null
+++ b/include/net/netfilter/nf_conntrack_l4proto.h
@@ -0,0 +1,152 @@
+/*
+ * Header for use in defining a given L4 protocol for connection tracking.
+ *
+ * 16 Dec 2003: Yasuyuki Kozakai @USAGI <yasuyuki.kozakai@toshiba.co.jp>
+ *	- generalized L3 protocol dependent part.
+ *
+ * Derived from include/linux/netfiter_ipv4/ip_conntrack_protcol.h
+ */
+
+#ifndef _NF_CONNTRACK_L4PROTO_H
+#define _NF_CONNTRACK_L4PROTO_H
+#include <linux/netlink.h>
+#include <net/netlink.h>
+#include <net/netfilter/nf_conntrack.h>
+
+struct seq_file;
+
+struct nf_conntrack_l4proto {
+	/* L3 Protocol number. */
+	u_int16_t l3proto;
+
+	/* L4 Protocol number. */
+	u_int8_t l4proto;
+
+	/* Try to fill in the third arg: dataoff is offset past network protocol
+           hdr.  Return true if possible. */
+	bool (*pkt_to_tuple)(const struct sk_buff *skb, unsigned int dataoff,
+			     struct nf_conntrack_tuple *tuple);
+
+	/* Invert the per-proto part of the tuple: ie. turn xmit into reply.
+	 * Some packets can't be inverted: return 0 in that case.
+	 */
+	bool (*invert_tuple)(struct nf_conntrack_tuple *inverse,
+			     const struct nf_conntrack_tuple *orig);
+
+	/* Returns verdict for packet, or -1 for invalid. */
+	int (*packet)(struct nf_conn *ct,
+		      const struct sk_buff *skb,
+		      unsigned int dataoff,
+		      enum ip_conntrack_info ctinfo,
+		      u_int8_t pf,
+		      unsigned int hooknum,
+		      unsigned int *timeouts);
+
+	/* Called when a new connection for this protocol found;
+	 * returns TRUE if it's OK.  If so, packet() called next. */
+	bool (*new)(struct nf_conn *ct, const struct sk_buff *skb,
+		    unsigned int dataoff, unsigned int *timeouts);
+
+	/* Called when a conntrack entry is destroyed */
+	void (*destroy)(struct nf_conn *ct);
+
+	int (*error)(struct net *net, struct nf_conn *tmpl, struct sk_buff *skb,
+		     unsigned int dataoff, enum ip_conntrack_info *ctinfo,
+		     u_int8_t pf, unsigned int hooknum);
+
+	/* Print out the per-protocol part of the tuple. Return like seq_* */
+	int (*print_tuple)(struct seq_file *s,
+			   const struct nf_conntrack_tuple *);
+
+	/* Print out the private part of the conntrack. */
+	int (*print_conntrack)(struct seq_file *s, struct nf_conn *);
+
+	/* Return the array of timeouts for this protocol. */
+	unsigned int *(*get_timeouts)(struct net *net);
+
+	/* convert protoinfo to nfnetink attributes */
+	int (*to_nlattr)(struct sk_buff *skb, struct nlattr *nla,
+			 struct nf_conn *ct);
+	/* Calculate protoinfo nlattr size */
+	int (*nlattr_size)(void);
+
+	/* convert nfnetlink attributes to protoinfo */
+	int (*from_nlattr)(struct nlattr *tb[], struct nf_conn *ct);
+
+	int (*tuple_to_nlattr)(struct sk_buff *skb,
+			       const struct nf_conntrack_tuple *t);
+	/* Calculate tuple nlattr size */
+	int (*nlattr_tuple_size)(void);
+	int (*nlattr_to_tuple)(struct nlattr *tb[],
+			       struct nf_conntrack_tuple *t);
+	const struct nla_policy *nla_policy;
+
+	size_t nla_size;
+
+#if IS_ENABLED(CONFIG_NF_CT_NETLINK_TIMEOUT)
+	struct {
+		size_t obj_size;
+		int (*nlattr_to_obj)(struct nlattr *tb[], void *data);
+		int (*obj_to_nlattr)(struct sk_buff *skb, const void *data);
+
+		unsigned int nlattr_max;
+		const struct nla_policy *nla_policy;
+	} ctnl_timeout;
+#endif
+
+#ifdef CONFIG_SYSCTL
+	struct ctl_table_header	**ctl_table_header;
+	struct ctl_table	*ctl_table;
+	unsigned int		*ctl_table_users;
+#ifdef CONFIG_NF_CONNTRACK_PROC_COMPAT
+	struct ctl_table_header	*ctl_compat_table_header;
+	struct ctl_table	*ctl_compat_table;
+#endif
+#endif
+	/* Protocol name */
+	const char *name;
+
+	/* Module (if any) which this is connected to. */
+	struct module *me;
+};
+
+/* Existing built-in generic protocol */
+extern struct nf_conntrack_l4proto nf_conntrack_l4proto_generic;
+
+#define MAX_NF_CT_PROTO 256
+
+extern struct nf_conntrack_l4proto *
+__nf_ct_l4proto_find(u_int16_t l3proto, u_int8_t l4proto);
+
+extern struct nf_conntrack_l4proto *
+nf_ct_l4proto_find_get(u_int16_t l3proto, u_int8_t l4proto);
+extern void nf_ct_l4proto_put(struct nf_conntrack_l4proto *p);
+
+/* Protocol registration. */
+extern int nf_conntrack_l4proto_register(struct nf_conntrack_l4proto *proto);
+extern void nf_conntrack_l4proto_unregister(struct nf_conntrack_l4proto *proto);
+
+/* Generic netlink helpers */
+extern int nf_ct_port_tuple_to_nlattr(struct sk_buff *skb,
+				      const struct nf_conntrack_tuple *tuple);
+extern int nf_ct_port_nlattr_to_tuple(struct nlattr *tb[],
+				      struct nf_conntrack_tuple *t);
+extern int nf_ct_port_nlattr_tuple_size(void);
+extern const struct nla_policy nf_ct_port_nla_policy[];
+
+#ifdef CONFIG_SYSCTL
+#ifdef DEBUG_INVALID_PACKETS
+#define LOG_INVALID(net, proto)				\
+	((net)->ct.sysctl_log_invalid == (proto) ||	\
+	 (net)->ct.sysctl_log_invalid == IPPROTO_RAW)
+#else
+#define LOG_INVALID(net, proto)				\
+	(((net)->ct.sysctl_log_invalid == (proto) ||	\
+	  (net)->ct.sysctl_log_invalid == IPPROTO_RAW)	\
+	 && net_ratelimit())
+#endif
+#else
+static inline int LOG_INVALID(struct net *net, int proto) { return 0; }
+#endif /* CONFIG_SYSCTL */
+
+#endif /*_NF_CONNTRACK_PROTOCOL_H*/
diff --git a/include/net/netfilter/nf_conntrack_timeout.h b/include/net/netfilter/nf_conntrack_timeout.h
new file mode 100644
index 00000000..34ec89f8
--- /dev/null
+++ b/include/net/netfilter/nf_conntrack_timeout.h
@@ -0,0 +1,78 @@
+#ifndef _NF_CONNTRACK_TIMEOUT_H
+#define _NF_CONNTRACK_TIMEOUT_H
+
+#include <net/net_namespace.h>
+#include <linux/netfilter/nf_conntrack_common.h>
+#include <linux/netfilter/nf_conntrack_tuple_common.h>
+#include <net/netfilter/nf_conntrack.h>
+#include <net/netfilter/nf_conntrack_extend.h>
+
+#define CTNL_TIMEOUT_NAME_MAX	32
+
+struct ctnl_timeout {
+	struct list_head	head;
+	struct rcu_head		rcu_head;
+	atomic_t		refcnt;
+	char			name[CTNL_TIMEOUT_NAME_MAX];
+	__u16			l3num;
+	struct nf_conntrack_l4proto *l4proto;
+	char			data[0];
+};
+
+struct nf_conn_timeout {
+	struct ctnl_timeout	*timeout;
+};
+
+#define NF_CT_TIMEOUT_EXT_DATA(__t) (unsigned int *) &((__t)->timeout->data)
+
+static inline
+struct nf_conn_timeout *nf_ct_timeout_find(const struct nf_conn *ct)
+{
+#ifdef CONFIG_NF_CONNTRACK_TIMEOUT
+	return nf_ct_ext_find(ct, NF_CT_EXT_TIMEOUT);
+#else
+	return NULL;
+#endif
+}
+
+static inline
+struct nf_conn_timeout *nf_ct_timeout_ext_add(struct nf_conn *ct,
+					      struct ctnl_timeout *timeout,
+					      gfp_t gfp)
+{
+#ifdef CONFIG_NF_CONNTRACK_TIMEOUT
+	struct nf_conn_timeout *timeout_ext;
+
+	timeout_ext = nf_ct_ext_add(ct, NF_CT_EXT_TIMEOUT, gfp);
+	if (timeout_ext == NULL)
+		return NULL;
+
+	timeout_ext->timeout = timeout;
+
+	return timeout_ext;
+#else
+	return NULL;
+#endif
+};
+
+#ifdef CONFIG_NF_CONNTRACK_TIMEOUT
+extern int nf_conntrack_timeout_init(struct net *net);
+extern void nf_conntrack_timeout_fini(struct net *net);
+#else
+static inline int nf_conntrack_timeout_init(struct net *net)
+{
+        return 0;
+}
+
+static inline void nf_conntrack_timeout_fini(struct net *net)
+{
+        return;
+}
+#endif /* CONFIG_NF_CONNTRACK_TIMEOUT */
+
+#ifdef CONFIG_NF_CONNTRACK_TIMEOUT
+extern struct ctnl_timeout *(*nf_ct_timeout_find_get_hook)(const char *name);
+extern void (*nf_ct_timeout_put_hook)(struct ctnl_timeout *timeout);
+#endif
+
+#endif /* _NF_CONNTRACK_TIMEOUT_H */
diff --git a/include/net/netfilter/nf_conntrack_timestamp.h b/include/net/netfilter/nf_conntrack_timestamp.h
new file mode 100644
index 00000000..fc9c82b1
--- /dev/null
+++ b/include/net/netfilter/nf_conntrack_timestamp.h
@@ -0,0 +1,65 @@
+#ifndef _NF_CONNTRACK_TSTAMP_H
+#define _NF_CONNTRACK_TSTAMP_H
+
+#include <net/net_namespace.h>
+#include <linux/netfilter/nf_conntrack_common.h>
+#include <linux/netfilter/nf_conntrack_tuple_common.h>
+#include <net/netfilter/nf_conntrack.h>
+#include <net/netfilter/nf_conntrack_extend.h>
+
+struct nf_conn_tstamp {
+	u_int64_t start;
+	u_int64_t stop;
+};
+
+static inline
+struct nf_conn_tstamp *nf_conn_tstamp_find(const struct nf_conn *ct)
+{
+#ifdef CONFIG_NF_CONNTRACK_TIMESTAMP
+	return nf_ct_ext_find(ct, NF_CT_EXT_TSTAMP);
+#else
+	return NULL;
+#endif
+}
+
+static inline
+struct nf_conn_tstamp *nf_ct_tstamp_ext_add(struct nf_conn *ct, gfp_t gfp)
+{
+#ifdef CONFIG_NF_CONNTRACK_TIMESTAMP
+	struct net *net = nf_ct_net(ct);
+
+	if (!net->ct.sysctl_tstamp)
+		return NULL;
+
+	return nf_ct_ext_add(ct, NF_CT_EXT_TSTAMP, gfp);
+#else
+	return NULL;
+#endif
+};
+
+static inline bool nf_ct_tstamp_enabled(struct net *net)
+{
+	return net->ct.sysctl_tstamp != 0;
+}
+
+static inline void nf_ct_set_tstamp(struct net *net, bool enable)
+{
+	net->ct.sysctl_tstamp = enable;
+}
+
+#ifdef CONFIG_NF_CONNTRACK_TIMESTAMP
+extern int nf_conntrack_tstamp_init(struct net *net);
+extern void nf_conntrack_tstamp_fini(struct net *net);
+#else
+static inline int nf_conntrack_tstamp_init(struct net *net)
+{
+	return 0;
+}
+
+static inline void nf_conntrack_tstamp_fini(struct net *net)
+{
+	return;
+}
+#endif /* CONFIG_NF_CONNTRACK_TIMESTAMP */
+
+#endif /* _NF_CONNTRACK_TSTAMP_H */
diff --git a/include/net/netfilter/nf_conntrack_tuple.h b/include/net/netfilter/nf_conntrack_tuple.h
new file mode 100644
index 00000000..aea3f822
--- /dev/null
+++ b/include/net/netfilter/nf_conntrack_tuple.h
@@ -0,0 +1,186 @@
+/*
+ * Definitions and Declarations for tuple.
+ *
+ * 16 Dec 2003: Yasuyuki Kozakai @USAGI <yasuyuki.kozakai@toshiba.co.jp>
+ *	- generalize L3 protocol dependent part.
+ *
+ * Derived from include/linux/netfiter_ipv4/ip_conntrack_tuple.h
+ */
+
+#ifndef _NF_CONNTRACK_TUPLE_H
+#define _NF_CONNTRACK_TUPLE_H
+
+#include <linux/netfilter/x_tables.h>
+#include <linux/netfilter/nf_conntrack_tuple_common.h>
+#include <linux/list_nulls.h>
+
+/* A `tuple' is a structure containing the information to uniquely
+  identify a connection.  ie. if two packets have the same tuple, they
+  are in the same connection; if not, they are not.
+
+  We divide the structure along "manipulatable" and
+  "non-manipulatable" lines, for the benefit of the NAT code.
+*/
+
+#define NF_CT_TUPLE_L3SIZE	ARRAY_SIZE(((union nf_inet_addr *)NULL)->all)
+
+/* The manipulable part of the tuple. */
+struct nf_conntrack_man {
+	union nf_inet_addr u3;
+	union nf_conntrack_man_proto u;
+	/* Layer 3 protocol */
+	u_int16_t l3num;
+};
+
+/* This contains the information to distinguish a connection. */
+struct nf_conntrack_tuple {
+	struct nf_conntrack_man src;
+
+	/* These are the parts of the tuple which are fixed. */
+	struct {
+		union nf_inet_addr u3;
+		union {
+			/* Add other protocols here. */
+			__be16 all;
+
+			struct {
+				__be16 port;
+			} tcp;
+			struct {
+				__be16 port;
+			} udp;
+			struct {
+				u_int8_t type, code;
+			} icmp;
+			struct {
+				__be16 port;
+			} dccp;
+			struct {
+				__be16 port;
+			} sctp;
+			struct {
+				__be16 key;
+			} gre;
+		} u;
+
+		/* The protocol. */
+		u_int8_t protonum;
+
+		/* The direction (for tuplehash) */
+		u_int8_t dir;
+	} dst;
+};
+
+struct nf_conntrack_tuple_mask {
+	struct {
+		union nf_inet_addr u3;
+		union nf_conntrack_man_proto u;
+	} src;
+};
+
+static inline void nf_ct_dump_tuple_ip(const struct nf_conntrack_tuple *t)
+{
+#ifdef DEBUG
+	printk("tuple %p: %u %pI4:%hu -> %pI4:%hu\n",
+	       t, t->dst.protonum,
+	       &t->src.u3.ip, ntohs(t->src.u.all),
+	       &t->dst.u3.ip, ntohs(t->dst.u.all));
+#endif
+}
+
+static inline void nf_ct_dump_tuple_ipv6(const struct nf_conntrack_tuple *t)
+{
+#ifdef DEBUG
+	printk("tuple %p: %u %pI6 %hu -> %pI6 %hu\n",
+	       t, t->dst.protonum,
+	       t->src.u3.all, ntohs(t->src.u.all),
+	       t->dst.u3.all, ntohs(t->dst.u.all));
+#endif
+}
+
+static inline void nf_ct_dump_tuple(const struct nf_conntrack_tuple *t)
+{
+	switch (t->src.l3num) {
+	case AF_INET:
+		nf_ct_dump_tuple_ip(t);
+		break;
+	case AF_INET6:
+		nf_ct_dump_tuple_ipv6(t);
+		break;
+	}
+}
+
+/* If we're the first tuple, it's the original dir. */
+#define NF_CT_DIRECTION(h)						\
+	((enum ip_conntrack_dir)(h)->tuple.dst.dir)
+
+/* Connections have two entries in the hash table: one for each way */
+struct nf_conntrack_tuple_hash {
+	struct hlist_nulls_node hnnode;
+	struct nf_conntrack_tuple tuple;
+};
+
+static inline bool __nf_ct_tuple_src_equal(const struct nf_conntrack_tuple *t1,
+					   const struct nf_conntrack_tuple *t2)
+{ 
+	return (nf_inet_addr_cmp(&t1->src.u3, &t2->src.u3) &&
+		t1->src.u.all == t2->src.u.all &&
+		t1->src.l3num == t2->src.l3num);
+}
+
+static inline bool __nf_ct_tuple_dst_equal(const struct nf_conntrack_tuple *t1,
+					   const struct nf_conntrack_tuple *t2)
+{
+	return (nf_inet_addr_cmp(&t1->dst.u3, &t2->dst.u3) &&
+		t1->dst.u.all == t2->dst.u.all &&
+		t1->dst.protonum == t2->dst.protonum);
+}
+
+static inline bool nf_ct_tuple_equal(const struct nf_conntrack_tuple *t1,
+				     const struct nf_conntrack_tuple *t2)
+{
+	return __nf_ct_tuple_src_equal(t1, t2) &&
+	       __nf_ct_tuple_dst_equal(t1, t2);
+}
+
+static inline bool
+nf_ct_tuple_mask_equal(const struct nf_conntrack_tuple_mask *m1,
+		       const struct nf_conntrack_tuple_mask *m2)
+{
+	return (nf_inet_addr_cmp(&m1->src.u3, &m2->src.u3) &&
+		m1->src.u.all == m2->src.u.all);
+}
+
+static inline bool
+nf_ct_tuple_src_mask_cmp(const struct nf_conntrack_tuple *t1,
+			 const struct nf_conntrack_tuple *t2,
+			 const struct nf_conntrack_tuple_mask *mask)
+{
+	int count;
+
+	for (count = 0; count < NF_CT_TUPLE_L3SIZE; count++) {
+		if ((t1->src.u3.all[count] ^ t2->src.u3.all[count]) &
+		    mask->src.u3.all[count])
+			return false;
+	}
+
+	if ((t1->src.u.all ^ t2->src.u.all) & mask->src.u.all)
+		return false;
+
+	if (t1->src.l3num != t2->src.l3num ||
+	    t1->dst.protonum != t2->dst.protonum)
+		return false;
+
+	return true;
+}
+
+static inline bool
+nf_ct_tuple_mask_cmp(const struct nf_conntrack_tuple *t,
+		     const struct nf_conntrack_tuple *tuple,
+		     const struct nf_conntrack_tuple_mask *mask)
+{
+	return nf_ct_tuple_src_mask_cmp(t, tuple, mask) &&
+	       __nf_ct_tuple_dst_equal(t, tuple);
+}
+
+#endif /* _NF_CONNTRACK_TUPLE_H */
diff --git a/include/net/netfilter/nf_conntrack_zones.h b/include/net/netfilter/nf_conntrack_zones.h
new file mode 100644
index 00000000..034efe8d
--- /dev/null
+++ b/include/net/netfilter/nf_conntrack_zones.h
@@ -0,0 +1,25 @@
+#ifndef _NF_CONNTRACK_ZONES_H
+#define _NF_CONNTRACK_ZONES_H
+
+#define NF_CT_DEFAULT_ZONE	0
+
+#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
+#include <net/netfilter/nf_conntrack_extend.h>
+
+struct nf_conntrack_zone {
+	u16	id;
+};
+
+static inline u16 nf_ct_zone(const struct nf_conn *ct)
+{
+#ifdef CONFIG_NF_CONNTRACK_ZONES
+	struct nf_conntrack_zone *nf_ct_zone;
+	nf_ct_zone = nf_ct_ext_find(ct, NF_CT_EXT_ZONE);
+	if (nf_ct_zone)
+		return nf_ct_zone->id;
+#endif
+	return NF_CT_DEFAULT_ZONE;
+}
+
+#endif /* CONFIG_NF_CONNTRACK || CONFIG_NF_CONNTRACK_MODULE */
+#endif /* _NF_CONNTRACK_ZONES_H */
diff --git a/include/net/netfilter/nf_log.h b/include/net/netfilter/nf_log.h
new file mode 100644
index 00000000..e991bd0a
--- /dev/null
+++ b/include/net/netfilter/nf_log.h
@@ -0,0 +1,65 @@
+#ifndef _NF_LOG_H
+#define _NF_LOG_H
+
+#include <linux/netfilter.h>
+
+/* those NF_LOG_* defines and struct nf_loginfo are legacy definitios that will
+ * disappear once iptables is replaced with pkttables.  Please DO NOT use them
+ * for any new code! */
+#define NF_LOG_TCPSEQ		0x01	/* Log TCP sequence numbers */
+#define NF_LOG_TCPOPT		0x02	/* Log TCP options */
+#define NF_LOG_IPOPT		0x04	/* Log IP options */
+#define NF_LOG_UID		0x08	/* Log UID owning local socket */
+#define NF_LOG_MASK		0x0f
+
+#define NF_LOG_TYPE_LOG		0x01
+#define NF_LOG_TYPE_ULOG	0x02
+
+struct nf_loginfo {
+	u_int8_t type;
+	union {
+		struct {
+			u_int32_t copy_len;
+			u_int16_t group;
+			u_int16_t qthreshold;
+		} ulog;
+		struct {
+			u_int8_t level;
+			u_int8_t logflags;
+		} log;
+	} u;
+};
+
+typedef void nf_logfn(u_int8_t pf,
+		      unsigned int hooknum,
+		      const struct sk_buff *skb,
+		      const struct net_device *in,
+		      const struct net_device *out,
+		      const struct nf_loginfo *li,
+		      const char *prefix);
+
+struct nf_logger {
+	struct module	*me;
+	nf_logfn 	*logfn;
+	char		*name;
+	struct list_head	list[NFPROTO_NUMPROTO];
+};
+
+/* Function to register/unregister log function. */
+int nf_log_register(u_int8_t pf, struct nf_logger *logger);
+void nf_log_unregister(struct nf_logger *logger);
+
+int nf_log_bind_pf(u_int8_t pf, const struct nf_logger *logger);
+void nf_log_unbind_pf(u_int8_t pf);
+
+/* Calls the registered backend logging function */
+__printf(7, 8)
+void nf_log_packet(u_int8_t pf,
+		   unsigned int hooknum,
+		   const struct sk_buff *skb,
+		   const struct net_device *in,
+		   const struct net_device *out,
+		   const struct nf_loginfo *li,
+		   const char *fmt, ...);
+
+#endif /* _NF_LOG_H */
diff --git a/include/net/netfilter/nf_nat.h b/include/net/netfilter/nf_nat.h
new file mode 100644
index 00000000..b4de990b
--- /dev/null
+++ b/include/net/netfilter/nf_nat.h
@@ -0,0 +1,69 @@
+#ifndef _NF_NAT_H
+#define _NF_NAT_H
+#include <linux/netfilter_ipv4.h>
+#include <linux/netfilter/nf_nat.h>
+#include <net/netfilter/nf_conntrack_tuple.h>
+
+enum nf_nat_manip_type {
+	NF_NAT_MANIP_SRC,
+	NF_NAT_MANIP_DST
+};
+
+/* SRC manip occurs POST_ROUTING or LOCAL_IN */
+#define HOOK2MANIP(hooknum) ((hooknum) != NF_INET_POST_ROUTING && \
+			     (hooknum) != NF_INET_LOCAL_IN)
+
+/* NAT sequence number modifications */
+struct nf_nat_seq {
+	/* position of the last TCP sequence number modification (if any) */
+	u_int32_t correction_pos;
+
+	/* sequence number offset before and after last modification */
+	int16_t offset_before, offset_after;
+};
+
+#include <linux/list.h>
+#include <linux/netfilter/nf_conntrack_pptp.h>
+#include <net/netfilter/nf_conntrack_extend.h>
+
+/* per conntrack: nat application helper private data */
+union nf_conntrack_nat_help {
+	/* insert nat helper private data here */
+#if defined(CONFIG_NF_NAT_PPTP) || defined(CONFIG_NF_NAT_PPTP_MODULE)
+	struct nf_nat_pptp nat_pptp_info;
+#endif
+};
+
+struct nf_conn;
+
+/* The structure embedded in the conntrack structure. */
+struct nf_conn_nat {
+	struct hlist_node bysource;
+	struct nf_nat_seq seq[IP_CT_DIR_MAX];
+	struct nf_conn *ct;
+	union nf_conntrack_nat_help help;
+#if defined(CONFIG_IP_NF_TARGET_MASQUERADE) || \
+    defined(CONFIG_IP_NF_TARGET_MASQUERADE_MODULE)
+	int masq_index;
+#endif
+};
+
+/* Set up the info structure to map into this range. */
+extern unsigned int nf_nat_setup_info(struct nf_conn *ct,
+				      const struct nf_nat_ipv4_range *range,
+				      enum nf_nat_manip_type maniptype);
+
+/* Is this tuple already taken? (not by us)*/
+extern int nf_nat_used_tuple(const struct nf_conntrack_tuple *tuple,
+			     const struct nf_conn *ignored_conntrack);
+
+static inline struct nf_conn_nat *nfct_nat(const struct nf_conn *ct)
+{
+#if defined(CONFIG_NF_NAT) || defined(CONFIG_NF_NAT_MODULE)
+	return nf_ct_ext_find(ct, NF_CT_EXT_NAT);
+#else
+	return NULL;
+#endif
+}
+
+#endif
diff --git a/include/net/netfilter/nf_nat_core.h b/include/net/netfilter/nf_nat_core.h
new file mode 100644
index 00000000..b13d8d18
--- /dev/null
+++ b/include/net/netfilter/nf_nat_core.h
@@ -0,0 +1,36 @@
+#ifndef _NF_NAT_CORE_H
+#define _NF_NAT_CORE_H
+#include <linux/list.h>
+#include <net/netfilter/nf_conntrack.h>
+#include <net/netfilter/nf_nat.h>
+
+/* This header used to share core functionality between the standalone
+   NAT module, and the compatibility layer's use of NAT for masquerading. */
+
+extern unsigned int nf_nat_packet(struct nf_conn *ct,
+				  enum ip_conntrack_info ctinfo,
+				  unsigned int hooknum,
+				  struct sk_buff *skb);
+
+extern int nf_nat_icmp_reply_translation(struct nf_conn *ct,
+					 enum ip_conntrack_info ctinfo,
+					 unsigned int hooknum,
+					 struct sk_buff *skb);
+
+static inline int nf_nat_initialized(struct nf_conn *ct,
+				     enum nf_nat_manip_type manip)
+{
+	if (manip == NF_NAT_MANIP_SRC)
+		return ct->status & IPS_SRC_NAT_DONE;
+	else
+		return ct->status & IPS_DST_NAT_DONE;
+}
+
+struct nlattr;
+
+extern int
+(*nfnetlink_parse_nat_setup_hook)(struct nf_conn *ct,
+				  enum nf_nat_manip_type manip,
+				  const struct nlattr *attr);
+
+#endif /* _NF_NAT_CORE_H */
diff --git a/include/net/netfilter/nf_nat_helper.h b/include/net/netfilter/nf_nat_helper.h
new file mode 100644
index 00000000..02bb6c29
--- /dev/null
+++ b/include/net/netfilter/nf_nat_helper.h
@@ -0,0 +1,57 @@
+#ifndef _NF_NAT_HELPER_H
+#define _NF_NAT_HELPER_H
+/* NAT protocol helper routines. */
+
+#include <net/netfilter/nf_conntrack.h>
+
+struct sk_buff;
+
+/* These return true or false. */
+extern int __nf_nat_mangle_tcp_packet(struct sk_buff *skb,
+				      struct nf_conn *ct,
+				      enum ip_conntrack_info ctinfo,
+				      unsigned int match_offset,
+				      unsigned int match_len,
+				      const char *rep_buffer,
+				      unsigned int rep_len, bool adjust);
+
+static inline int nf_nat_mangle_tcp_packet(struct sk_buff *skb,
+					   struct nf_conn *ct,
+					   enum ip_conntrack_info ctinfo,
+					   unsigned int match_offset,
+					   unsigned int match_len,
+					   const char *rep_buffer,
+					   unsigned int rep_len)
+{
+	return __nf_nat_mangle_tcp_packet(skb, ct, ctinfo,
+					  match_offset, match_len,
+					  rep_buffer, rep_len, true);
+}
+
+extern int nf_nat_mangle_udp_packet(struct sk_buff *skb,
+				    struct nf_conn *ct,
+				    enum ip_conntrack_info ctinfo,
+				    unsigned int match_offset,
+				    unsigned int match_len,
+				    const char *rep_buffer,
+				    unsigned int rep_len);
+
+extern void nf_nat_set_seq_adjust(struct nf_conn *ct,
+				  enum ip_conntrack_info ctinfo,
+				  __be32 seq, s16 off);
+extern int nf_nat_seq_adjust(struct sk_buff *skb,
+			     struct nf_conn *ct,
+			     enum ip_conntrack_info ctinfo);
+extern int (*nf_nat_seq_adjust_hook)(struct sk_buff *skb,
+				     struct nf_conn *ct,
+				     enum ip_conntrack_info ctinfo);
+
+/* Setup NAT on this expected conntrack so it follows master, but goes
+ * to port ct->master->saved_proto. */
+extern void nf_nat_follow_master(struct nf_conn *ct,
+				 struct nf_conntrack_expect *this);
+
+extern s16 nf_nat_get_offset(const struct nf_conn *ct,
+			     enum ip_conntrack_dir dir,
+			     u32 seq);
+#endif
diff --git a/include/net/netfilter/nf_nat_protocol.h b/include/net/netfilter/nf_nat_protocol.h
new file mode 100644
index 00000000..7b0b5116
--- /dev/null
+++ b/include/net/netfilter/nf_nat_protocol.h
@@ -0,0 +1,67 @@
+/* Header for use in defining a given protocol. */
+#ifndef _NF_NAT_PROTOCOL_H
+#define _NF_NAT_PROTOCOL_H
+#include <net/netfilter/nf_nat.h>
+#include <linux/netfilter/nfnetlink_conntrack.h>
+
+struct nf_nat_ipv4_range;
+
+struct nf_nat_protocol {
+	/* Protocol number. */
+	unsigned int protonum;
+
+	/* Translate a packet to the target according to manip type.
+	   Return true if succeeded. */
+	bool (*manip_pkt)(struct sk_buff *skb,
+			  unsigned int iphdroff,
+			  const struct nf_conntrack_tuple *tuple,
+			  enum nf_nat_manip_type maniptype);
+
+	/* Is the manipable part of the tuple between min and max incl? */
+	bool (*in_range)(const struct nf_conntrack_tuple *tuple,
+			 enum nf_nat_manip_type maniptype,
+			 const union nf_conntrack_man_proto *min,
+			 const union nf_conntrack_man_proto *max);
+
+	/* Alter the per-proto part of the tuple (depending on
+	   maniptype), to give a unique tuple in the given range if
+	   possible.  Per-protocol part of tuple is initialized to the
+	   incoming packet. */
+	void (*unique_tuple)(struct nf_conntrack_tuple *tuple,
+			     const struct nf_nat_ipv4_range *range,
+			     enum nf_nat_manip_type maniptype,
+			     const struct nf_conn *ct);
+
+	int (*nlattr_to_range)(struct nlattr *tb[],
+			       struct nf_nat_ipv4_range *range);
+};
+
+/* Protocol registration. */
+extern int nf_nat_protocol_register(const struct nf_nat_protocol *proto);
+extern void nf_nat_protocol_unregister(const struct nf_nat_protocol *proto);
+
+/* Built-in protocols. */
+extern const struct nf_nat_protocol nf_nat_protocol_tcp;
+extern const struct nf_nat_protocol nf_nat_protocol_udp;
+extern const struct nf_nat_protocol nf_nat_protocol_icmp;
+extern const struct nf_nat_protocol nf_nat_unknown_protocol;
+
+extern int init_protocols(void) __init;
+extern void cleanup_protocols(void);
+extern const struct nf_nat_protocol *find_nat_proto(u_int16_t protonum);
+
+extern bool nf_nat_proto_in_range(const struct nf_conntrack_tuple *tuple,
+				  enum nf_nat_manip_type maniptype,
+				  const union nf_conntrack_man_proto *min,
+				  const union nf_conntrack_man_proto *max);
+
+extern void nf_nat_proto_unique_tuple(struct nf_conntrack_tuple *tuple,
+				      const struct nf_nat_ipv4_range *range,
+				      enum nf_nat_manip_type maniptype,
+				      const struct nf_conn *ct,
+				      u_int16_t *rover);
+
+extern int nf_nat_proto_nlattr_to_range(struct nlattr *tb[],
+					struct nf_nat_ipv4_range *range);
+
+#endif /*_NF_NAT_PROTO_H*/
diff --git a/include/net/netfilter/nf_nat_rule.h b/include/net/netfilter/nf_nat_rule.h
new file mode 100644
index 00000000..2890bdc4
--- /dev/null
+++ b/include/net/netfilter/nf_nat_rule.h
@@ -0,0 +1,15 @@
+#ifndef _NF_NAT_RULE_H
+#define _NF_NAT_RULE_H
+#include <net/netfilter/nf_conntrack.h>
+#include <net/netfilter/nf_nat.h>
+#include <linux/netfilter_ipv4/ip_tables.h>
+
+extern int nf_nat_rule_init(void) __init;
+extern void nf_nat_rule_cleanup(void);
+extern int nf_nat_rule_find(struct sk_buff *skb,
+			    unsigned int hooknum,
+			    const struct net_device *in,
+			    const struct net_device *out,
+			    struct nf_conn *ct);
+
+#endif /* _NF_NAT_RULE_H */
diff --git a/include/net/netfilter/nf_queue.h b/include/net/netfilter/nf_queue.h
new file mode 100644
index 00000000..252fd101
--- /dev/null
+++ b/include/net/netfilter/nf_queue.h
@@ -0,0 +1,34 @@
+#ifndef _NF_QUEUE_H
+#define _NF_QUEUE_H
+
+/* Each queued (to userspace) skbuff has one of these. */
+struct nf_queue_entry {
+	struct list_head	list;
+	struct sk_buff		*skb;
+	unsigned int		id;
+
+	struct nf_hook_ops	*elem;
+	u_int8_t		pf;
+	unsigned int		hook;
+	struct net_device	*indev;
+	struct net_device	*outdev;
+	int			(*okfn)(struct sk_buff *);
+};
+
+#define nf_queue_entry_reroute(x) ((void *)x + sizeof(struct nf_queue_entry))
+
+/* Packet queuing */
+struct nf_queue_handler {
+	int			(*outfn)(struct nf_queue_entry *entry,
+					 unsigned int queuenum);
+	char			*name;
+};
+
+extern int nf_register_queue_handler(u_int8_t pf,
+				     const struct nf_queue_handler *qh);
+extern int nf_unregister_queue_handler(u_int8_t pf,
+				       const struct nf_queue_handler *qh);
+extern void nf_unregister_queue_handlers(const struct nf_queue_handler *qh);
+extern void nf_reinject(struct nf_queue_entry *entry, unsigned int verdict);
+
+#endif /* _NF_QUEUE_H */
diff --git a/include/net/netfilter/nf_tproxy_core.h b/include/net/netfilter/nf_tproxy_core.h
new file mode 100644
index 00000000..75ca9291
--- /dev/null
+++ b/include/net/netfilter/nf_tproxy_core.h
@@ -0,0 +1,208 @@
+#ifndef _NF_TPROXY_CORE_H
+#define _NF_TPROXY_CORE_H
+
+#include <linux/types.h>
+#include <linux/in.h>
+#include <linux/skbuff.h>
+#include <net/sock.h>
+#include <net/inet_hashtables.h>
+#include <net/inet6_hashtables.h>
+#include <net/tcp.h>
+
+#define NFT_LOOKUP_ANY         0
+#define NFT_LOOKUP_LISTENER    1
+#define NFT_LOOKUP_ESTABLISHED 2
+
+/* look up and get a reference to a matching socket */
+
+
+/* This function is used by the 'TPROXY' target and the 'socket'
+ * match. The following lookups are supported:
+ *
+ * Explicit TProxy target rule
+ * ===========================
+ *
+ * This is used when the user wants to intercept a connection matching
+ * an explicit iptables rule. In this case the sockets are assumed
+ * matching in preference order:
+ *
+ *   - match: if there's a fully established connection matching the
+ *     _packet_ tuple, it is returned, assuming the redirection
+ *     already took place and we process a packet belonging to an
+ *     established connection
+ *
+ *   - match: if there's a listening socket matching the redirection
+ *     (e.g. on-port & on-ip of the connection), it is returned,
+ *     regardless if it was bound to 0.0.0.0 or an explicit
+ *     address. The reasoning is that if there's an explicit rule, it
+ *     does not really matter if the listener is bound to an interface
+ *     or to 0. The user already stated that he wants redirection
+ *     (since he added the rule).
+ *
+ * "socket" match based redirection (no specific rule)
+ * ===================================================
+ *
+ * There are connections with dynamic endpoints (e.g. FTP data
+ * connection) that the user is unable to add explicit rules
+ * for. These are taken care of by a generic "socket" rule. It is
+ * assumed that the proxy application is trusted to open such
+ * connections without explicit iptables rule (except of course the
+ * generic 'socket' rule). In this case the following sockets are
+ * matched in preference order:
+ *
+ *   - match: if there's a fully established connection matching the
+ *     _packet_ tuple
+ *
+ *   - match: if there's a non-zero bound listener (possibly with a
+ *     non-local address) We don't accept zero-bound listeners, since
+ *     then local services could intercept traffic going through the
+ *     box.
+ *
+ * Please note that there's an overlap between what a TPROXY target
+ * and a socket match will match. Normally if you have both rules the
+ * "socket" match will be the first one, effectively all packets
+ * belonging to established connections going through that one.
+ */
+static inline struct sock *
+nf_tproxy_get_sock_v4(struct net *net, const u8 protocol,
+		      const __be32 saddr, const __be32 daddr,
+		      const __be16 sport, const __be16 dport,
+		      const struct net_device *in, int lookup_type)
+{
+	struct sock *sk;
+
+	/* look up socket */
+	switch (protocol) {
+	case IPPROTO_TCP:
+		switch (lookup_type) {
+		case NFT_LOOKUP_ANY:
+			sk = __inet_lookup(net, &tcp_hashinfo,
+					   saddr, sport, daddr, dport,
+					   in->ifindex);
+			break;
+		case NFT_LOOKUP_LISTENER:
+			sk = inet_lookup_listener(net, &tcp_hashinfo,
+						    daddr, dport,
+						    in->ifindex);
+
+			/* NOTE: we return listeners even if bound to
+			 * 0.0.0.0, those are filtered out in
+			 * xt_socket, since xt_TPROXY needs 0 bound
+			 * listeners too */
+
+			break;
+		case NFT_LOOKUP_ESTABLISHED:
+			sk = inet_lookup_established(net, &tcp_hashinfo,
+						    saddr, sport, daddr, dport,
+						    in->ifindex);
+			break;
+		default:
+			WARN_ON(1);
+			sk = NULL;
+			break;
+		}
+		break;
+	case IPPROTO_UDP:
+		sk = udp4_lib_lookup(net, saddr, sport, daddr, dport,
+				     in->ifindex);
+		if (sk && lookup_type != NFT_LOOKUP_ANY) {
+			int connected = (sk->sk_state == TCP_ESTABLISHED);
+			int wildcard = (inet_sk(sk)->inet_rcv_saddr == 0);
+
+			/* NOTE: we return listeners even if bound to
+			 * 0.0.0.0, those are filtered out in
+			 * xt_socket, since xt_TPROXY needs 0 bound
+			 * listeners too */
+			if ((lookup_type == NFT_LOOKUP_ESTABLISHED && (!connected || wildcard)) ||
+			    (lookup_type == NFT_LOOKUP_LISTENER && connected)) {
+				sock_put(sk);
+				sk = NULL;
+			}
+		}
+		break;
+	default:
+		WARN_ON(1);
+		sk = NULL;
+	}
+
+	pr_debug("tproxy socket lookup: proto %u %08x:%u -> %08x:%u, lookup type: %d, sock %p\n",
+		 protocol, ntohl(saddr), ntohs(sport), ntohl(daddr), ntohs(dport), lookup_type, sk);
+
+	return sk;
+}
+
+#if IS_ENABLED(CONFIG_IPV6)
+static inline struct sock *
+nf_tproxy_get_sock_v6(struct net *net, const u8 protocol,
+		      const struct in6_addr *saddr, const struct in6_addr *daddr,
+		      const __be16 sport, const __be16 dport,
+		      const struct net_device *in, int lookup_type)
+{
+	struct sock *sk;
+
+	/* look up socket */
+	switch (protocol) {
+	case IPPROTO_TCP:
+		switch (lookup_type) {
+		case NFT_LOOKUP_ANY:
+			sk = inet6_lookup(net, &tcp_hashinfo,
+					  saddr, sport, daddr, dport,
+					  in->ifindex);
+			break;
+		case NFT_LOOKUP_LISTENER:
+			sk = inet6_lookup_listener(net, &tcp_hashinfo,
+						   daddr, ntohs(dport),
+						   in->ifindex);
+
+			/* NOTE: we return listeners even if bound to
+			 * 0.0.0.0, those are filtered out in
+			 * xt_socket, since xt_TPROXY needs 0 bound
+			 * listeners too */
+
+			break;
+		case NFT_LOOKUP_ESTABLISHED:
+			sk = __inet6_lookup_established(net, &tcp_hashinfo,
+							saddr, sport, daddr, ntohs(dport),
+							in->ifindex);
+			break;
+		default:
+			WARN_ON(1);
+			sk = NULL;
+			break;
+		}
+		break;
+	case IPPROTO_UDP:
+		sk = udp6_lib_lookup(net, saddr, sport, daddr, dport,
+				     in->ifindex);
+		if (sk && lookup_type != NFT_LOOKUP_ANY) {
+			int connected = (sk->sk_state == TCP_ESTABLISHED);
+			int wildcard = ipv6_addr_any(&inet6_sk(sk)->rcv_saddr);
+
+			/* NOTE: we return listeners even if bound to
+			 * 0.0.0.0, those are filtered out in
+			 * xt_socket, since xt_TPROXY needs 0 bound
+			 * listeners too */
+			if ((lookup_type == NFT_LOOKUP_ESTABLISHED && (!connected || wildcard)) ||
+			    (lookup_type == NFT_LOOKUP_LISTENER && connected)) {
+				sock_put(sk);
+				sk = NULL;
+			}
+		}
+		break;
+	default:
+		WARN_ON(1);
+		sk = NULL;
+	}
+
+	pr_debug("tproxy socket lookup: proto %u %pI6:%u -> %pI6:%u, lookup type: %d, sock %p\n",
+		 protocol, saddr, ntohs(sport), daddr, ntohs(dport), lookup_type, sk);
+
+	return sk;
+}
+#endif
+
+/* assign a socket to the skb -- consumes sk */
+void
+nf_tproxy_assign_sock(struct sk_buff *skb, struct sock *sk);
+
+#endif
diff --git a/include/net/netfilter/nfnetlink_log.h b/include/net/netfilter/nfnetlink_log.h
new file mode 100644
index 00000000..e2dec42c
--- /dev/null
+++ b/include/net/netfilter/nfnetlink_log.h
@@ -0,0 +1,16 @@
+#ifndef _KER_NFNETLINK_LOG_H
+#define _KER_NFNETLINK_LOG_H
+
+void
+nfulnl_log_packet(u_int8_t pf,
+		  unsigned int hooknum,
+		  const struct sk_buff *skb,
+		  const struct net_device *in,
+		  const struct net_device *out,
+		  const struct nf_loginfo *li_user,
+		  const char *prefix);
+
+#define NFULNL_COPY_DISABLED    0xff
+
+#endif /* _KER_NFNETLINK_LOG_H */
+
diff --git a/include/net/netfilter/xt_log.h b/include/net/netfilter/xt_log.h
new file mode 100644
index 00000000..9d9756cc
--- /dev/null
+++ b/include/net/netfilter/xt_log.h
@@ -0,0 +1,54 @@
+#define S_SIZE (1024 - (sizeof(unsigned int) + 1))
+
+struct sbuff {
+	unsigned int	count;
+	char		buf[S_SIZE + 1];
+};
+static struct sbuff emergency, *emergency_ptr = &emergency;
+
+static __printf(2, 3) int sb_add(struct sbuff *m, const char *f, ...)
+{
+	va_list args;
+	int len;
+
+	if (likely(m->count < S_SIZE)) {
+		va_start(args, f);
+		len = vsnprintf(m->buf + m->count, S_SIZE - m->count, f, args);
+		va_end(args);
+		if (likely(m->count + len < S_SIZE)) {
+			m->count += len;
+			return 0;
+		}
+	}
+	m->count = S_SIZE;
+	printk_once(KERN_ERR KBUILD_MODNAME " please increase S_SIZE\n");
+	return -1;
+}
+
+static struct sbuff *sb_open(void)
+{
+	struct sbuff *m = kmalloc(sizeof(*m), GFP_ATOMIC);
+
+	if (unlikely(!m)) {
+		local_bh_disable();
+		do {
+			m = xchg(&emergency_ptr, NULL);
+		} while (!m);
+	}
+	m->count = 0;
+	return m;
+}
+
+static void sb_close(struct sbuff *m)
+{
+	m->buf[m->count] = 0;
+	printk("%s\n", m->buf);
+
+	if (likely(m != &emergency))
+		kfree(m);
+	else {
+		emergency_ptr = m;
+		local_bh_enable();
+	}
+}
+
diff --git a/include/net/netfilter/xt_rateest.h b/include/net/netfilter/xt_rateest.h
new file mode 100644
index 00000000..5a2978d1
--- /dev/null
+++ b/include/net/netfilter/xt_rateest.h
@@ -0,0 +1,22 @@
+#ifndef _XT_RATEEST_H
+#define _XT_RATEEST_H
+
+struct xt_rateest {
+	/* keep lock and bstats on same cache line to speedup xt_rateest_tg() */
+	struct gnet_stats_basic_packed	bstats;
+	spinlock_t			lock;
+	/* keep rstats and lock on same cache line to speedup xt_rateest_mt() */
+	struct gnet_stats_rate_est	rstats;
+
+	/* following fields not accessed in hot path */
+	struct hlist_node		list;
+	char				name[IFNAMSIZ];
+	unsigned int			refcnt;
+	struct gnet_estimator		params;
+	struct rcu_head			rcu;
+};
+
+extern struct xt_rateest *xt_rateest_lookup(const char *name);
+extern void xt_rateest_put(struct xt_rateest *est);
+
+#endif /* _XT_RATEEST_H */
diff --git a/include/net/netlabel.h b/include/net/netlabel.h
new file mode 100644
index 00000000..f6744097
--- /dev/null
+++ b/include/net/netlabel.h
@@ -0,0 +1,590 @@
+/*
+ * NetLabel System
+ *
+ * The NetLabel system manages static and dynamic label mappings for network
+ * protocols such as CIPSO and RIPSO.
+ *
+ * Author: Paul Moore <paul@paul-moore.com>
+ *
+ */
+
+/*
+ * (c) Copyright Hewlett-Packard Development Company, L.P., 2006, 2008
+ *
+ * This program is free software;  you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY;  without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program;  if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef _NETLABEL_H
+#define _NETLABEL_H
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/net.h>
+#include <linux/skbuff.h>
+#include <linux/in.h>
+#include <linux/in6.h>
+#include <net/netlink.h>
+#include <net/request_sock.h>
+#include <linux/atomic.h>
+
+struct cipso_v4_doi;
+
+/*
+ * NetLabel - A management interface for maintaining network packet label
+ *            mapping tables for explicit packet labling protocols.
+ *
+ * Network protocols such as CIPSO and RIPSO require a label translation layer
+ * to convert the label on the packet into something meaningful on the host
+ * machine.  In the current Linux implementation these mapping tables live
+ * inside the kernel; NetLabel provides a mechanism for user space applications
+ * to manage these mapping tables.
+ *
+ * NetLabel makes use of the Generic NETLINK mechanism as a transport layer to
+ * send messages between kernel and user space.  The general format of a
+ * NetLabel message is shown below:
+ *
+ *  +-----------------+-------------------+--------- --- -- -
+ *  | struct nlmsghdr | struct genlmsghdr | payload
+ *  +-----------------+-------------------+--------- --- -- -
+ *
+ * The 'nlmsghdr' and 'genlmsghdr' structs should be dealt with like normal.
+ * The payload is dependent on the subsystem specified in the
+ * 'nlmsghdr->nlmsg_type' and should be defined below, supporting functions
+ * should be defined in the corresponding net/netlabel/netlabel_<subsys>.h|c
+ * file.  All of the fields in the NetLabel payload are NETLINK attributes, see
+ * the include/net/netlink.h file for more information on NETLINK attributes.
+ *
+ */
+
+/*
+ * NetLabel NETLINK protocol
+ */
+
+/* NetLabel NETLINK protocol version
+ *  1: initial version
+ *  2: added static labels for unlabeled connections
+ *  3: network selectors added to the NetLabel/LSM domain mapping and the
+ *     CIPSO_V4_MAP_LOCAL CIPSO mapping was added
+ */
+#define NETLBL_PROTO_VERSION            3
+
+/* NetLabel NETLINK types/families */
+#define NETLBL_NLTYPE_NONE              0
+#define NETLBL_NLTYPE_MGMT              1
+#define NETLBL_NLTYPE_MGMT_NAME         "NLBL_MGMT"
+#define NETLBL_NLTYPE_RIPSO             2
+#define NETLBL_NLTYPE_RIPSO_NAME        "NLBL_RIPSO"
+#define NETLBL_NLTYPE_CIPSOV4           3
+#define NETLBL_NLTYPE_CIPSOV4_NAME      "NLBL_CIPSOv4"
+#define NETLBL_NLTYPE_CIPSOV6           4
+#define NETLBL_NLTYPE_CIPSOV6_NAME      "NLBL_CIPSOv6"
+#define NETLBL_NLTYPE_UNLABELED         5
+#define NETLBL_NLTYPE_UNLABELED_NAME    "NLBL_UNLBL"
+#define NETLBL_NLTYPE_ADDRSELECT        6
+#define NETLBL_NLTYPE_ADDRSELECT_NAME   "NLBL_ADRSEL"
+
+/*
+ * NetLabel - Kernel API for accessing the network packet label mappings.
+ *
+ * The following functions are provided for use by other kernel modules,
+ * specifically kernel LSM modules, to provide a consistent, transparent API
+ * for dealing with explicit packet labeling protocols such as CIPSO and
+ * RIPSO.  The functions defined here are implemented in the
+ * net/netlabel/netlabel_kapi.c file.
+ *
+ */
+
+/* NetLabel audit information */
+struct netlbl_audit {
+	u32 secid;
+	uid_t loginuid;
+	u32 sessionid;
+};
+
+/*
+ * LSM security attributes
+ */
+
+/**
+ * struct netlbl_lsm_cache - NetLabel LSM security attribute cache
+ * @refcount: atomic reference counter
+ * @free: LSM supplied function to free the cache data
+ * @data: LSM supplied cache data
+ *
+ * Description:
+ * This structure is provided for LSMs which wish to make use of the NetLabel
+ * caching mechanism to store LSM specific data/attributes in the NetLabel
+ * cache.  If the LSM has to perform a lot of translation from the NetLabel
+ * security attributes into it's own internal representation then the cache
+ * mechanism can provide a way to eliminate some or all of that translation
+ * overhead on a cache hit.
+ *
+ */
+struct netlbl_lsm_cache {
+	atomic_t refcount;
+	void (*free) (const void *data);
+	void *data;
+};
+
+/**
+ * struct netlbl_lsm_secattr_catmap - NetLabel LSM secattr category bitmap
+ * @startbit: the value of the lowest order bit in the bitmap
+ * @bitmap: the category bitmap
+ * @next: pointer to the next bitmap "node" or NULL
+ *
+ * Description:
+ * This structure is used to represent category bitmaps.  Due to the large
+ * number of categories supported by most labeling protocols it is not
+ * practical to transfer a full bitmap internally so NetLabel adopts a sparse
+ * bitmap structure modeled after SELinux's ebitmap structure.
+ * The catmap bitmap field MUST be a power of two in length and large
+ * enough to hold at least 240 bits.  Special care (i.e. check the code!)
+ * should be used when changing these values as the LSM implementation
+ * probably has functions which rely on the sizes of these types to speed
+ * processing.
+ *
+ */
+#define NETLBL_CATMAP_MAPTYPE           u64
+#define NETLBL_CATMAP_MAPCNT            4
+#define NETLBL_CATMAP_MAPSIZE           (sizeof(NETLBL_CATMAP_MAPTYPE) * 8)
+#define NETLBL_CATMAP_SIZE              (NETLBL_CATMAP_MAPSIZE * \
+					 NETLBL_CATMAP_MAPCNT)
+#define NETLBL_CATMAP_BIT               (NETLBL_CATMAP_MAPTYPE)0x01
+struct netlbl_lsm_secattr_catmap {
+	u32 startbit;
+	NETLBL_CATMAP_MAPTYPE bitmap[NETLBL_CATMAP_MAPCNT];
+	struct netlbl_lsm_secattr_catmap *next;
+};
+
+/**
+ * struct netlbl_lsm_secattr - NetLabel LSM security attributes
+ * @flags: indicate structure attributes, see NETLBL_SECATTR_*
+ * @type: indicate the NLTYPE of the attributes
+ * @domain: the NetLabel LSM domain
+ * @cache: NetLabel LSM specific cache
+ * @attr.mls: MLS sensitivity label
+ * @attr.mls.cat: MLS category bitmap
+ * @attr.mls.lvl: MLS sensitivity level
+ * @attr.secid: LSM specific secid token
+ *
+ * Description:
+ * This structure is used to pass security attributes between NetLabel and the
+ * LSM modules.  The flags field is used to specify which fields within the
+ * struct are valid and valid values can be created by bitwise OR'ing the
+ * NETLBL_SECATTR_* defines.  The domain field is typically set by the LSM to
+ * specify domain specific configuration settings and is not usually used by
+ * NetLabel itself when returning security attributes to the LSM.
+ *
+ */
+struct netlbl_lsm_secattr {
+	u32 flags;
+	/* bitmap values for 'flags' */
+#define NETLBL_SECATTR_NONE             0x00000000
+#define NETLBL_SECATTR_DOMAIN           0x00000001
+#define NETLBL_SECATTR_DOMAIN_CPY       (NETLBL_SECATTR_DOMAIN | \
+					 NETLBL_SECATTR_FREE_DOMAIN)
+#define NETLBL_SECATTR_CACHE            0x00000002
+#define NETLBL_SECATTR_MLS_LVL          0x00000004
+#define NETLBL_SECATTR_MLS_CAT          0x00000008
+#define NETLBL_SECATTR_SECID            0x00000010
+	/* bitmap meta-values for 'flags' */
+#define NETLBL_SECATTR_FREE_DOMAIN      0x01000000
+#define NETLBL_SECATTR_CACHEABLE        (NETLBL_SECATTR_MLS_LVL | \
+					 NETLBL_SECATTR_MLS_CAT | \
+					 NETLBL_SECATTR_SECID)
+	u32 type;
+	char *domain;
+	struct netlbl_lsm_cache *cache;
+	struct {
+		struct {
+			struct netlbl_lsm_secattr_catmap *cat;
+			u32 lvl;
+		} mls;
+		u32 secid;
+	} attr;
+};
+
+/*
+ * LSM security attribute operations (inline)
+ */
+
+/**
+ * netlbl_secattr_cache_alloc - Allocate and initialize a secattr cache
+ * @flags: the memory allocation flags
+ *
+ * Description:
+ * Allocate and initialize a netlbl_lsm_cache structure.  Returns a pointer
+ * on success, NULL on failure.
+ *
+ */
+static inline struct netlbl_lsm_cache *netlbl_secattr_cache_alloc(gfp_t flags)
+{
+	struct netlbl_lsm_cache *cache;
+
+	cache = kzalloc(sizeof(*cache), flags);
+	if (cache)
+		atomic_set(&cache->refcount, 1);
+	return cache;
+}
+
+/**
+ * netlbl_secattr_cache_free - Frees a netlbl_lsm_cache struct
+ * @cache: the struct to free
+ *
+ * Description:
+ * Frees @secattr including all of the internal buffers.
+ *
+ */
+static inline void netlbl_secattr_cache_free(struct netlbl_lsm_cache *cache)
+{
+	if (!atomic_dec_and_test(&cache->refcount))
+		return;
+
+	if (cache->free)
+		cache->free(cache->data);
+	kfree(cache);
+}
+
+/**
+ * netlbl_secattr_catmap_alloc - Allocate a LSM secattr catmap
+ * @flags: memory allocation flags
+ *
+ * Description:
+ * Allocate memory for a LSM secattr catmap, returns a pointer on success, NULL
+ * on failure.
+ *
+ */
+static inline struct netlbl_lsm_secattr_catmap *netlbl_secattr_catmap_alloc(
+	                                                           gfp_t flags)
+{
+	return kzalloc(sizeof(struct netlbl_lsm_secattr_catmap), flags);
+}
+
+/**
+ * netlbl_secattr_catmap_free - Free a LSM secattr catmap
+ * @catmap: the category bitmap
+ *
+ * Description:
+ * Free a LSM secattr catmap.
+ *
+ */
+static inline void netlbl_secattr_catmap_free(
+	                              struct netlbl_lsm_secattr_catmap *catmap)
+{
+	struct netlbl_lsm_secattr_catmap *iter;
+
+	do {
+		iter = catmap;
+		catmap = catmap->next;
+		kfree(iter);
+	} while (catmap);
+}
+
+/**
+ * netlbl_secattr_init - Initialize a netlbl_lsm_secattr struct
+ * @secattr: the struct to initialize
+ *
+ * Description:
+ * Initialize an already allocated netlbl_lsm_secattr struct.
+ *
+ */
+static inline void netlbl_secattr_init(struct netlbl_lsm_secattr *secattr)
+{
+	memset(secattr, 0, sizeof(*secattr));
+}
+
+/**
+ * netlbl_secattr_destroy - Clears a netlbl_lsm_secattr struct
+ * @secattr: the struct to clear
+ *
+ * Description:
+ * Destroys the @secattr struct, including freeing all of the internal buffers.
+ * The struct must be reset with a call to netlbl_secattr_init() before reuse.
+ *
+ */
+static inline void netlbl_secattr_destroy(struct netlbl_lsm_secattr *secattr)
+{
+	if (secattr->flags & NETLBL_SECATTR_FREE_DOMAIN)
+		kfree(secattr->domain);
+	if (secattr->flags & NETLBL_SECATTR_CACHE)
+		netlbl_secattr_cache_free(secattr->cache);
+	if (secattr->flags & NETLBL_SECATTR_MLS_CAT)
+		netlbl_secattr_catmap_free(secattr->attr.mls.cat);
+}
+
+/**
+ * netlbl_secattr_alloc - Allocate and initialize a netlbl_lsm_secattr struct
+ * @flags: the memory allocation flags
+ *
+ * Description:
+ * Allocate and initialize a netlbl_lsm_secattr struct.  Returns a valid
+ * pointer on success, or NULL on failure.
+ *
+ */
+static inline struct netlbl_lsm_secattr *netlbl_secattr_alloc(gfp_t flags)
+{
+	return kzalloc(sizeof(struct netlbl_lsm_secattr), flags);
+}
+
+/**
+ * netlbl_secattr_free - Frees a netlbl_lsm_secattr struct
+ * @secattr: the struct to free
+ *
+ * Description:
+ * Frees @secattr including all of the internal buffers.
+ *
+ */
+static inline void netlbl_secattr_free(struct netlbl_lsm_secattr *secattr)
+{
+	netlbl_secattr_destroy(secattr);
+	kfree(secattr);
+}
+
+#ifdef CONFIG_NETLABEL
+/*
+ * LSM configuration operations
+ */
+int netlbl_cfg_map_del(const char *domain,
+		       u16 family,
+		       const void *addr,
+		       const void *mask,
+		       struct netlbl_audit *audit_info);
+int netlbl_cfg_unlbl_map_add(const char *domain,
+			     u16 family,
+			     const void *addr,
+			     const void *mask,
+			     struct netlbl_audit *audit_info);
+int netlbl_cfg_unlbl_static_add(struct net *net,
+				const char *dev_name,
+				const void *addr,
+				const void *mask,
+				u16 family,
+				u32 secid,
+				struct netlbl_audit *audit_info);
+int netlbl_cfg_unlbl_static_del(struct net *net,
+				const char *dev_name,
+				const void *addr,
+				const void *mask,
+				u16 family,
+				struct netlbl_audit *audit_info);
+int netlbl_cfg_cipsov4_add(struct cipso_v4_doi *doi_def,
+			   struct netlbl_audit *audit_info);
+void netlbl_cfg_cipsov4_del(u32 doi, struct netlbl_audit *audit_info);
+int netlbl_cfg_cipsov4_map_add(u32 doi,
+			       const char *domain,
+			       const struct in_addr *addr,
+			       const struct in_addr *mask,
+			       struct netlbl_audit *audit_info);
+/*
+ * LSM security attribute operations
+ */
+int netlbl_secattr_catmap_walk(struct netlbl_lsm_secattr_catmap *catmap,
+			       u32 offset);
+int netlbl_secattr_catmap_walk_rng(struct netlbl_lsm_secattr_catmap *catmap,
+				   u32 offset);
+int netlbl_secattr_catmap_setbit(struct netlbl_lsm_secattr_catmap *catmap,
+				 u32 bit,
+				 gfp_t flags);
+int netlbl_secattr_catmap_setrng(struct netlbl_lsm_secattr_catmap *catmap,
+				 u32 start,
+				 u32 end,
+				 gfp_t flags);
+
+/*
+ * LSM protocol operations (NetLabel LSM/kernel API)
+ */
+int netlbl_enabled(void);
+int netlbl_sock_setattr(struct sock *sk,
+			u16 family,
+			const struct netlbl_lsm_secattr *secattr);
+void netlbl_sock_delattr(struct sock *sk);
+int netlbl_sock_getattr(struct sock *sk,
+			struct netlbl_lsm_secattr *secattr);
+int netlbl_conn_setattr(struct sock *sk,
+			struct sockaddr *addr,
+			const struct netlbl_lsm_secattr *secattr);
+int netlbl_req_setattr(struct request_sock *req,
+		       const struct netlbl_lsm_secattr *secattr);
+void netlbl_req_delattr(struct request_sock *req);
+int netlbl_skbuff_setattr(struct sk_buff *skb,
+			  u16 family,
+			  const struct netlbl_lsm_secattr *secattr);
+int netlbl_skbuff_getattr(const struct sk_buff *skb,
+			  u16 family,
+			  struct netlbl_lsm_secattr *secattr);
+void netlbl_skbuff_err(struct sk_buff *skb, int error, int gateway);
+
+/*
+ * LSM label mapping cache operations
+ */
+void netlbl_cache_invalidate(void);
+int netlbl_cache_add(const struct sk_buff *skb,
+		     const struct netlbl_lsm_secattr *secattr);
+
+/*
+ * Protocol engine operations
+ */
+struct audit_buffer *netlbl_audit_start(int type,
+					struct netlbl_audit *audit_info);
+#else
+static inline int netlbl_cfg_map_del(const char *domain,
+				     u16 family,
+				     const void *addr,
+				     const void *mask,
+				     struct netlbl_audit *audit_info)
+{
+	return -ENOSYS;
+}
+static inline int netlbl_cfg_unlbl_map_add(const char *domain,
+					   u16 family,
+					   void *addr,
+					   void *mask,
+					   struct netlbl_audit *audit_info)
+{
+	return -ENOSYS;
+}
+static inline int netlbl_cfg_unlbl_static_add(struct net *net,
+					      const char *dev_name,
+					      const void *addr,
+					      const void *mask,
+					      u16 family,
+					      u32 secid,
+					      struct netlbl_audit *audit_info)
+{
+	return -ENOSYS;
+}
+static inline int netlbl_cfg_unlbl_static_del(struct net *net,
+					      const char *dev_name,
+					      const void *addr,
+					      const void *mask,
+					      u16 family,
+					      struct netlbl_audit *audit_info)
+{
+	return -ENOSYS;
+}
+static inline int netlbl_cfg_cipsov4_add(struct cipso_v4_doi *doi_def,
+					 struct netlbl_audit *audit_info)
+{
+	return -ENOSYS;
+}
+static inline void netlbl_cfg_cipsov4_del(u32 doi,
+					  struct netlbl_audit *audit_info)
+{
+	return;
+}
+static inline int netlbl_cfg_cipsov4_map_add(u32 doi,
+					     const char *domain,
+					     const struct in_addr *addr,
+					     const struct in_addr *mask,
+					     struct netlbl_audit *audit_info)
+{
+	return -ENOSYS;
+}
+static inline int netlbl_secattr_catmap_walk(
+	                              struct netlbl_lsm_secattr_catmap *catmap,
+				      u32 offset)
+{
+	return -ENOENT;
+}
+static inline int netlbl_secattr_catmap_walk_rng(
+				      struct netlbl_lsm_secattr_catmap *catmap,
+				      u32 offset)
+{
+	return -ENOENT;
+}
+static inline int netlbl_secattr_catmap_setbit(
+	                              struct netlbl_lsm_secattr_catmap *catmap,
+				      u32 bit,
+				      gfp_t flags)
+{
+	return 0;
+}
+static inline int netlbl_secattr_catmap_setrng(
+	                              struct netlbl_lsm_secattr_catmap *catmap,
+				      u32 start,
+				      u32 end,
+				      gfp_t flags)
+{
+	return 0;
+}
+static inline int netlbl_enabled(void)
+{
+	return 0;
+}
+static inline int netlbl_sock_setattr(struct sock *sk,
+				      u16 family,
+				      const struct netlbl_lsm_secattr *secattr)
+{
+	return -ENOSYS;
+}
+static inline void netlbl_sock_delattr(struct sock *sk)
+{
+}
+static inline int netlbl_sock_getattr(struct sock *sk,
+				      struct netlbl_lsm_secattr *secattr)
+{
+	return -ENOSYS;
+}
+static inline int netlbl_conn_setattr(struct sock *sk,
+				      struct sockaddr *addr,
+				      const struct netlbl_lsm_secattr *secattr)
+{
+	return -ENOSYS;
+}
+static inline int netlbl_req_setattr(struct request_sock *req,
+				     const struct netlbl_lsm_secattr *secattr)
+{
+	return -ENOSYS;
+}
+static inline void netlbl_req_delattr(struct request_sock *req)
+{
+	return;
+}
+static inline int netlbl_skbuff_setattr(struct sk_buff *skb,
+				      u16 family,
+				      const struct netlbl_lsm_secattr *secattr)
+{
+	return -ENOSYS;
+}
+static inline int netlbl_skbuff_getattr(const struct sk_buff *skb,
+					u16 family,
+					struct netlbl_lsm_secattr *secattr)
+{
+	return -ENOSYS;
+}
+static inline void netlbl_skbuff_err(struct sk_buff *skb,
+				     int error,
+				     int gateway)
+{
+	return;
+}
+static inline void netlbl_cache_invalidate(void)
+{
+	return;
+}
+static inline int netlbl_cache_add(const struct sk_buff *skb,
+				   const struct netlbl_lsm_secattr *secattr)
+{
+	return 0;
+}
+static inline struct audit_buffer *netlbl_audit_start(int type,
+						struct netlbl_audit *audit_info)
+{
+	return NULL;
+}
+#endif /* CONFIG_NETLABEL */
+
+#endif /* _NETLABEL_H */
diff --git a/include/net/netlink.h b/include/net/netlink.h
new file mode 100644
index 00000000..f394fe5d
--- /dev/null
+++ b/include/net/netlink.h
@@ -0,0 +1,1072 @@
+#ifndef __NET_NETLINK_H
+#define __NET_NETLINK_H
+
+#include <linux/types.h>
+#include <linux/netlink.h>
+#include <linux/jiffies.h>
+
+/* ========================================================================
+ *         Netlink Messages and Attributes Interface (As Seen On TV)
+ * ------------------------------------------------------------------------
+ *                          Messages Interface
+ * ------------------------------------------------------------------------
+ *
+ * Message Format:
+ *    <--- nlmsg_total_size(payload)  --->
+ *    <-- nlmsg_msg_size(payload) ->
+ *   +----------+- - -+-------------+- - -+-------- - -
+ *   | nlmsghdr | Pad |   Payload   | Pad | nlmsghdr
+ *   +----------+- - -+-------------+- - -+-------- - -
+ *   nlmsg_data(nlh)---^                   ^
+ *   nlmsg_next(nlh)-----------------------+
+ *
+ * Payload Format:
+ *    <---------------------- nlmsg_len(nlh) --------------------->
+ *    <------ hdrlen ------>       <- nlmsg_attrlen(nlh, hdrlen) ->
+ *   +----------------------+- - -+--------------------------------+
+ *   |     Family Header    | Pad |           Attributes           |
+ *   +----------------------+- - -+--------------------------------+
+ *   nlmsg_attrdata(nlh, hdrlen)---^
+ *
+ * Data Structures:
+ *   struct nlmsghdr			netlink message header
+ *
+ * Message Construction:
+ *   nlmsg_new()			create a new netlink message
+ *   nlmsg_put()			add a netlink message to an skb
+ *   nlmsg_put_answer()			callback based nlmsg_put()
+ *   nlmsg_end()			finalize netlink message
+ *   nlmsg_get_pos()			return current position in message
+ *   nlmsg_trim()			trim part of message
+ *   nlmsg_cancel()			cancel message construction
+ *   nlmsg_free()			free a netlink message
+ *
+ * Message Sending:
+ *   nlmsg_multicast()			multicast message to several groups
+ *   nlmsg_unicast()			unicast a message to a single socket
+ *   nlmsg_notify()			send notification message
+ *
+ * Message Length Calculations:
+ *   nlmsg_msg_size(payload)		length of message w/o padding
+ *   nlmsg_total_size(payload)		length of message w/ padding
+ *   nlmsg_padlen(payload)		length of padding at tail
+ *
+ * Message Payload Access:
+ *   nlmsg_data(nlh)			head of message payload
+ *   nlmsg_len(nlh)			length of message payload
+ *   nlmsg_attrdata(nlh, hdrlen)	head of attributes data
+ *   nlmsg_attrlen(nlh, hdrlen)		length of attributes data
+ *
+ * Message Parsing:
+ *   nlmsg_ok(nlh, remaining)		does nlh fit into remaining bytes?
+ *   nlmsg_next(nlh, remaining)		get next netlink message
+ *   nlmsg_parse()			parse attributes of a message
+ *   nlmsg_find_attr()			find an attribute in a message
+ *   nlmsg_for_each_msg()		loop over all messages
+ *   nlmsg_validate()			validate netlink message incl. attrs
+ *   nlmsg_for_each_attr()		loop over all attributes
+ *
+ * Misc:
+ *   nlmsg_report()			report back to application?
+ *
+ * ------------------------------------------------------------------------
+ *                          Attributes Interface
+ * ------------------------------------------------------------------------
+ *
+ * Attribute Format:
+ *    <------- nla_total_size(payload) ------->
+ *    <---- nla_attr_size(payload) ----->
+ *   +----------+- - -+- - - - - - - - - +- - -+-------- - -
+ *   |  Header  | Pad |     Payload      | Pad |  Header
+ *   +----------+- - -+- - - - - - - - - +- - -+-------- - -
+ *                     <- nla_len(nla) ->      ^
+ *   nla_data(nla)----^                        |
+ *   nla_next(nla)-----------------------------'
+ *
+ * Data Structures:
+ *   struct nlattr			netlink attribute header
+ *
+ * Attribute Construction:
+ *   nla_reserve(skb, type, len)	reserve room for an attribute
+ *   nla_reserve_nohdr(skb, len)	reserve room for an attribute w/o hdr
+ *   nla_put(skb, type, len, data)	add attribute to skb
+ *   nla_put_nohdr(skb, len, data)	add attribute w/o hdr
+ *   nla_append(skb, len, data)		append data to skb
+ *
+ * Attribute Construction for Basic Types:
+ *   nla_put_u8(skb, type, value)	add u8 attribute to skb
+ *   nla_put_u16(skb, type, value)	add u16 attribute to skb
+ *   nla_put_u32(skb, type, value)	add u32 attribute to skb
+ *   nla_put_u64(skb, type, value)	add u64 attribute to skb
+ *   nla_put_string(skb, type, str)	add string attribute to skb
+ *   nla_put_flag(skb, type)		add flag attribute to skb
+ *   nla_put_msecs(skb, type, jiffies)	add msecs attribute to skb
+ *
+ * Exceptions Based Attribute Construction:
+ *   NLA_PUT(skb, type, len, data)	add attribute to skb
+ *   NLA_PUT_U8(skb, type, value)	add u8 attribute to skb
+ *   NLA_PUT_U16(skb, type, value)	add u16 attribute to skb
+ *   NLA_PUT_U32(skb, type, value)	add u32 attribute to skb
+ *   NLA_PUT_U64(skb, type, value)	add u64 attribute to skb
+ *   NLA_PUT_STRING(skb, type, str)	add string attribute to skb
+ *   NLA_PUT_FLAG(skb, type)		add flag attribute to skb
+ *   NLA_PUT_MSECS(skb, type, jiffies)	add msecs attribute to skb
+ *
+ *   The meaning of these functions is equal to their lower case
+ *   variants but they jump to the label nla_put_failure in case
+ *   of a failure.
+ *
+ * Nested Attributes Construction:
+ *   nla_nest_start(skb, type)		start a nested attribute
+ *   nla_nest_end(skb, nla)		finalize a nested attribute
+ *   nla_nest_cancel(skb, nla)		cancel nested attribute construction
+ *
+ * Attribute Length Calculations:
+ *   nla_attr_size(payload)		length of attribute w/o padding
+ *   nla_total_size(payload)		length of attribute w/ padding
+ *   nla_padlen(payload)		length of padding
+ *
+ * Attribute Payload Access:
+ *   nla_data(nla)			head of attribute payload
+ *   nla_len(nla)			length of attribute payload
+ *
+ * Attribute Payload Access for Basic Types:
+ *   nla_get_u8(nla)			get payload for a u8 attribute
+ *   nla_get_u16(nla)			get payload for a u16 attribute
+ *   nla_get_u32(nla)			get payload for a u32 attribute
+ *   nla_get_u64(nla)			get payload for a u64 attribute
+ *   nla_get_flag(nla)			return 1 if flag is true
+ *   nla_get_msecs(nla)			get payload for a msecs attribute
+ *
+ * Attribute Misc:
+ *   nla_memcpy(dest, nla, count)	copy attribute into memory
+ *   nla_memcmp(nla, data, size)	compare attribute with memory area
+ *   nla_strlcpy(dst, nla, size)	copy attribute to a sized string
+ *   nla_strcmp(nla, str)		compare attribute with string
+ *
+ * Attribute Parsing:
+ *   nla_ok(nla, remaining)		does nla fit into remaining bytes?
+ *   nla_next(nla, remaining)		get next netlink attribute
+ *   nla_validate()			validate a stream of attributes
+ *   nla_validate_nested()		validate a stream of nested attributes
+ *   nla_find()				find attribute in stream of attributes
+ *   nla_find_nested()			find attribute in nested attributes
+ *   nla_parse()			parse and validate stream of attrs
+ *   nla_parse_nested()			parse nested attribuets
+ *   nla_for_each_attr()		loop over all attributes
+ *   nla_for_each_nested()		loop over the nested attributes
+ *=========================================================================
+ */
+
+ /**
+  * Standard attribute types to specify validation policy
+  */
+enum {
+	NLA_UNSPEC,
+	NLA_U8,
+	NLA_U16,
+	NLA_U32,
+	NLA_U64,
+	NLA_STRING,
+	NLA_FLAG,
+	NLA_MSECS,
+	NLA_NESTED,
+	NLA_NESTED_COMPAT,
+	NLA_NUL_STRING,
+	NLA_BINARY,
+	__NLA_TYPE_MAX,
+};
+
+#define NLA_TYPE_MAX (__NLA_TYPE_MAX - 1)
+
+/**
+ * struct nla_policy - attribute validation policy
+ * @type: Type of attribute or NLA_UNSPEC
+ * @len: Type specific length of payload
+ *
+ * Policies are defined as arrays of this struct, the array must be
+ * accessible by attribute type up to the highest identifier to be expected.
+ *
+ * Meaning of `len' field:
+ *    NLA_STRING           Maximum length of string
+ *    NLA_NUL_STRING       Maximum length of string (excluding NUL)
+ *    NLA_FLAG             Unused
+ *    NLA_BINARY           Maximum length of attribute payload
+ *    NLA_NESTED           Don't use `len' field -- length verification is
+ *                         done by checking len of nested header (or empty)
+ *    NLA_NESTED_COMPAT    Minimum length of structure payload
+ *    NLA_U8, NLA_U16,
+ *    NLA_U32, NLA_U64,
+ *    NLA_MSECS            Leaving the length field zero will verify the
+ *                         given type fits, using it verifies minimum length
+ *                         just like "All other"
+ *    All other            Minimum length of attribute payload
+ *
+ * Example:
+ * static const struct nla_policy my_policy[ATTR_MAX+1] = {
+ * 	[ATTR_FOO] = { .type = NLA_U16 },
+ *	[ATTR_BAR] = { .type = NLA_STRING, .len = BARSIZ },
+ *	[ATTR_BAZ] = { .len = sizeof(struct mystruct) },
+ * };
+ */
+struct nla_policy {
+	u16		type;
+	u16		len;
+};
+
+/**
+ * struct nl_info - netlink source information
+ * @nlh: Netlink message header of original request
+ * @pid: Netlink PID of requesting application
+ */
+struct nl_info {
+	struct nlmsghdr		*nlh;
+	struct net		*nl_net;
+	u32			pid;
+};
+
+extern int		netlink_rcv_skb(struct sk_buff *skb,
+					int (*cb)(struct sk_buff *,
+						  struct nlmsghdr *));
+extern int		nlmsg_notify(struct sock *sk, struct sk_buff *skb,
+				     u32 pid, unsigned int group, int report,
+				     gfp_t flags);
+
+extern int		nla_validate(const struct nlattr *head,
+				     int len, int maxtype,
+				     const struct nla_policy *policy);
+extern int		nla_parse(struct nlattr **tb, int maxtype,
+				  const struct nlattr *head, int len,
+				  const struct nla_policy *policy);
+extern int		nla_policy_len(const struct nla_policy *, int);
+extern struct nlattr *	nla_find(const struct nlattr *head,
+				 int len, int attrtype);
+extern size_t		nla_strlcpy(char *dst, const struct nlattr *nla,
+				    size_t dstsize);
+extern int		nla_memcpy(void *dest, const struct nlattr *src, int count);
+extern int		nla_memcmp(const struct nlattr *nla, const void *data,
+				   size_t size);
+extern int		nla_strcmp(const struct nlattr *nla, const char *str);
+extern struct nlattr *	__nla_reserve(struct sk_buff *skb, int attrtype,
+				      int attrlen);
+extern void *		__nla_reserve_nohdr(struct sk_buff *skb, int attrlen);
+extern struct nlattr *	nla_reserve(struct sk_buff *skb, int attrtype,
+				    int attrlen);
+extern void *		nla_reserve_nohdr(struct sk_buff *skb, int attrlen);
+extern void		__nla_put(struct sk_buff *skb, int attrtype,
+				  int attrlen, const void *data);
+extern void		__nla_put_nohdr(struct sk_buff *skb, int attrlen,
+					const void *data);
+extern int		nla_put(struct sk_buff *skb, int attrtype,
+				int attrlen, const void *data);
+extern int		nla_put_nohdr(struct sk_buff *skb, int attrlen,
+				      const void *data);
+extern int		nla_append(struct sk_buff *skb, int attrlen,
+				   const void *data);
+
+/**************************************************************************
+ * Netlink Messages
+ **************************************************************************/
+
+/**
+ * nlmsg_msg_size - length of netlink message not including padding
+ * @payload: length of message payload
+ */
+static inline int nlmsg_msg_size(int payload)
+{
+	return NLMSG_HDRLEN + payload;
+}
+
+/**
+ * nlmsg_total_size - length of netlink message including padding
+ * @payload: length of message payload
+ */
+static inline int nlmsg_total_size(int payload)
+{
+	return NLMSG_ALIGN(nlmsg_msg_size(payload));
+}
+
+/**
+ * nlmsg_padlen - length of padding at the message's tail
+ * @payload: length of message payload
+ */
+static inline int nlmsg_padlen(int payload)
+{
+	return nlmsg_total_size(payload) - nlmsg_msg_size(payload);
+}
+
+/**
+ * nlmsg_data - head of message payload
+ * @nlh: netlink message header
+ */
+static inline void *nlmsg_data(const struct nlmsghdr *nlh)
+{
+	return (unsigned char *) nlh + NLMSG_HDRLEN;
+}
+
+/**
+ * nlmsg_len - length of message payload
+ * @nlh: netlink message header
+ */
+static inline int nlmsg_len(const struct nlmsghdr *nlh)
+{
+	return nlh->nlmsg_len - NLMSG_HDRLEN;
+}
+
+/**
+ * nlmsg_attrdata - head of attributes data
+ * @nlh: netlink message header
+ * @hdrlen: length of family specific header
+ */
+static inline struct nlattr *nlmsg_attrdata(const struct nlmsghdr *nlh,
+					    int hdrlen)
+{
+	unsigned char *data = nlmsg_data(nlh);
+	return (struct nlattr *) (data + NLMSG_ALIGN(hdrlen));
+}
+
+/**
+ * nlmsg_attrlen - length of attributes data
+ * @nlh: netlink message header
+ * @hdrlen: length of family specific header
+ */
+static inline int nlmsg_attrlen(const struct nlmsghdr *nlh, int hdrlen)
+{
+	return nlmsg_len(nlh) - NLMSG_ALIGN(hdrlen);
+}
+
+/**
+ * nlmsg_ok - check if the netlink message fits into the remaining bytes
+ * @nlh: netlink message header
+ * @remaining: number of bytes remaining in message stream
+ */
+static inline int nlmsg_ok(const struct nlmsghdr *nlh, int remaining)
+{
+	return (remaining >= (int) sizeof(struct nlmsghdr) &&
+		nlh->nlmsg_len >= sizeof(struct nlmsghdr) &&
+		nlh->nlmsg_len <= remaining);
+}
+
+/**
+ * nlmsg_next - next netlink message in message stream
+ * @nlh: netlink message header
+ * @remaining: number of bytes remaining in message stream
+ *
+ * Returns the next netlink message in the message stream and
+ * decrements remaining by the size of the current message.
+ */
+static inline struct nlmsghdr *
+nlmsg_next(const struct nlmsghdr *nlh, int *remaining)
+{
+	int totlen = NLMSG_ALIGN(nlh->nlmsg_len);
+
+	*remaining -= totlen;
+
+	return (struct nlmsghdr *) ((unsigned char *) nlh + totlen);
+}
+
+/**
+ * nlmsg_parse - parse attributes of a netlink message
+ * @nlh: netlink message header
+ * @hdrlen: length of family specific header
+ * @tb: destination array with maxtype+1 elements
+ * @maxtype: maximum attribute type to be expected
+ * @policy: validation policy
+ *
+ * See nla_parse()
+ */
+static inline int nlmsg_parse(const struct nlmsghdr *nlh, int hdrlen,
+			      struct nlattr *tb[], int maxtype,
+			      const struct nla_policy *policy)
+{
+	if (nlh->nlmsg_len < nlmsg_msg_size(hdrlen))
+		return -EINVAL;
+
+	return nla_parse(tb, maxtype, nlmsg_attrdata(nlh, hdrlen),
+			 nlmsg_attrlen(nlh, hdrlen), policy);
+}
+
+/**
+ * nlmsg_find_attr - find a specific attribute in a netlink message
+ * @nlh: netlink message header
+ * @hdrlen: length of familiy specific header
+ * @attrtype: type of attribute to look for
+ *
+ * Returns the first attribute which matches the specified type.
+ */
+static inline struct nlattr *nlmsg_find_attr(const struct nlmsghdr *nlh,
+					     int hdrlen, int attrtype)
+{
+	return nla_find(nlmsg_attrdata(nlh, hdrlen),
+			nlmsg_attrlen(nlh, hdrlen), attrtype);
+}
+
+/**
+ * nlmsg_validate - validate a netlink message including attributes
+ * @nlh: netlinket message header
+ * @hdrlen: length of familiy specific header
+ * @maxtype: maximum attribute type to be expected
+ * @policy: validation policy
+ */
+static inline int nlmsg_validate(const struct nlmsghdr *nlh,
+				 int hdrlen, int maxtype,
+				 const struct nla_policy *policy)
+{
+	if (nlh->nlmsg_len < nlmsg_msg_size(hdrlen))
+		return -EINVAL;
+
+	return nla_validate(nlmsg_attrdata(nlh, hdrlen),
+			    nlmsg_attrlen(nlh, hdrlen), maxtype, policy);
+}
+
+/**
+ * nlmsg_report - need to report back to application?
+ * @nlh: netlink message header
+ *
+ * Returns 1 if a report back to the application is requested.
+ */
+static inline int nlmsg_report(const struct nlmsghdr *nlh)
+{
+	return !!(nlh->nlmsg_flags & NLM_F_ECHO);
+}
+
+/**
+ * nlmsg_for_each_attr - iterate over a stream of attributes
+ * @pos: loop counter, set to current attribute
+ * @nlh: netlink message header
+ * @hdrlen: length of familiy specific header
+ * @rem: initialized to len, holds bytes currently remaining in stream
+ */
+#define nlmsg_for_each_attr(pos, nlh, hdrlen, rem) \
+	nla_for_each_attr(pos, nlmsg_attrdata(nlh, hdrlen), \
+			  nlmsg_attrlen(nlh, hdrlen), rem)
+
+/**
+ * nlmsg_put - Add a new netlink message to an skb
+ * @skb: socket buffer to store message in
+ * @pid: netlink process id
+ * @seq: sequence number of message
+ * @type: message type
+ * @payload: length of message payload
+ * @flags: message flags
+ *
+ * Returns NULL if the tailroom of the skb is insufficient to store
+ * the message header and payload.
+ */
+static inline struct nlmsghdr *nlmsg_put(struct sk_buff *skb, u32 pid, u32 seq,
+					 int type, int payload, int flags)
+{
+	if (unlikely(skb_tailroom(skb) < nlmsg_total_size(payload)))
+		return NULL;
+
+	return __nlmsg_put(skb, pid, seq, type, payload, flags);
+}
+
+/**
+ * nlmsg_put_answer - Add a new callback based netlink message to an skb
+ * @skb: socket buffer to store message in
+ * @cb: netlink callback
+ * @type: message type
+ * @payload: length of message payload
+ * @flags: message flags
+ *
+ * Returns NULL if the tailroom of the skb is insufficient to store
+ * the message header and payload.
+ */
+static inline struct nlmsghdr *nlmsg_put_answer(struct sk_buff *skb,
+						struct netlink_callback *cb,
+						int type, int payload,
+						int flags)
+{
+	return nlmsg_put(skb, NETLINK_CB(cb->skb).pid, cb->nlh->nlmsg_seq,
+			 type, payload, flags);
+}
+
+/**
+ * nlmsg_new - Allocate a new netlink message
+ * @payload: size of the message payload
+ * @flags: the type of memory to allocate.
+ *
+ * Use NLMSG_DEFAULT_SIZE if the size of the payload isn't known
+ * and a good default is needed.
+ */
+static inline struct sk_buff *nlmsg_new(size_t payload, gfp_t flags)
+{
+	return alloc_skb(nlmsg_total_size(payload), flags);
+}
+
+/**
+ * nlmsg_end - Finalize a netlink message
+ * @skb: socket buffer the message is stored in
+ * @nlh: netlink message header
+ *
+ * Corrects the netlink message header to include the appeneded
+ * attributes. Only necessary if attributes have been added to
+ * the message.
+ *
+ * Returns the total data length of the skb.
+ */
+static inline int nlmsg_end(struct sk_buff *skb, struct nlmsghdr *nlh)
+{
+	nlh->nlmsg_len = skb_tail_pointer(skb) - (unsigned char *)nlh;
+
+	return skb->len;
+}
+
+/**
+ * nlmsg_get_pos - return current position in netlink message
+ * @skb: socket buffer the message is stored in
+ *
+ * Returns a pointer to the current tail of the message.
+ */
+static inline void *nlmsg_get_pos(struct sk_buff *skb)
+{
+	return skb_tail_pointer(skb);
+}
+
+/**
+ * nlmsg_trim - Trim message to a mark
+ * @skb: socket buffer the message is stored in
+ * @mark: mark to trim to
+ *
+ * Trims the message to the provided mark.
+ */
+static inline void nlmsg_trim(struct sk_buff *skb, const void *mark)
+{
+	if (mark)
+		skb_trim(skb, (unsigned char *) mark - skb->data);
+}
+
+/**
+ * nlmsg_cancel - Cancel construction of a netlink message
+ * @skb: socket buffer the message is stored in
+ * @nlh: netlink message header
+ *
+ * Removes the complete netlink message including all
+ * attributes from the socket buffer again.
+ */
+static inline void nlmsg_cancel(struct sk_buff *skb, struct nlmsghdr *nlh)
+{
+	nlmsg_trim(skb, nlh);
+}
+
+/**
+ * nlmsg_free - free a netlink message
+ * @skb: socket buffer of netlink message
+ */
+static inline void nlmsg_free(struct sk_buff *skb)
+{
+	kfree_skb(skb);
+}
+
+/**
+ * nlmsg_multicast - multicast a netlink message
+ * @sk: netlink socket to spread messages to
+ * @skb: netlink message as socket buffer
+ * @pid: own netlink pid to avoid sending to yourself
+ * @group: multicast group id
+ * @flags: allocation flags
+ */
+static inline int nlmsg_multicast(struct sock *sk, struct sk_buff *skb,
+				  u32 pid, unsigned int group, gfp_t flags)
+{
+	int err;
+
+	NETLINK_CB(skb).dst_group = group;
+
+	err = netlink_broadcast(sk, skb, pid, group, flags);
+	if (err > 0)
+		err = 0;
+
+	return err;
+}
+
+/**
+ * nlmsg_unicast - unicast a netlink message
+ * @sk: netlink socket to spread message to
+ * @skb: netlink message as socket buffer
+ * @pid: netlink pid of the destination socket
+ */
+static inline int nlmsg_unicast(struct sock *sk, struct sk_buff *skb, u32 pid)
+{
+	int err;
+
+	err = netlink_unicast(sk, skb, pid, MSG_DONTWAIT);
+	if (err > 0)
+		err = 0;
+
+	return err;
+}
+
+/**
+ * nlmsg_for_each_msg - iterate over a stream of messages
+ * @pos: loop counter, set to current message
+ * @head: head of message stream
+ * @len: length of message stream
+ * @rem: initialized to len, holds bytes currently remaining in stream
+ */
+#define nlmsg_for_each_msg(pos, head, len, rem) \
+	for (pos = head, rem = len; \
+	     nlmsg_ok(pos, rem); \
+	     pos = nlmsg_next(pos, &(rem)))
+
+/**
+ * nl_dump_check_consistent - check if sequence is consistent and advertise if not
+ * @cb: netlink callback structure that stores the sequence number
+ * @nlh: netlink message header to write the flag to
+ *
+ * This function checks if the sequence (generation) number changed during dump
+ * and if it did, advertises it in the netlink message header.
+ *
+ * The correct way to use it is to set cb->seq to the generation counter when
+ * all locks for dumping have been acquired, and then call this function for
+ * each message that is generated.
+ *
+ * Note that due to initialisation concerns, 0 is an invalid sequence number
+ * and must not be used by code that uses this functionality.
+ */
+static inline void
+nl_dump_check_consistent(struct netlink_callback *cb,
+			 struct nlmsghdr *nlh)
+{
+	if (cb->prev_seq && cb->seq != cb->prev_seq)
+		nlh->nlmsg_flags |= NLM_F_DUMP_INTR;
+	cb->prev_seq = cb->seq;
+}
+
+/**************************************************************************
+ * Netlink Attributes
+ **************************************************************************/
+
+/**
+ * nla_attr_size - length of attribute not including padding
+ * @payload: length of payload
+ */
+static inline int nla_attr_size(int payload)
+{
+	return NLA_HDRLEN + payload;
+}
+
+/**
+ * nla_total_size - total length of attribute including padding
+ * @payload: length of payload
+ */
+static inline int nla_total_size(int payload)
+{
+	return NLA_ALIGN(nla_attr_size(payload));
+}
+
+/**
+ * nla_padlen - length of padding at the tail of attribute
+ * @payload: length of payload
+ */
+static inline int nla_padlen(int payload)
+{
+	return nla_total_size(payload) - nla_attr_size(payload);
+}
+
+/**
+ * nla_type - attribute type
+ * @nla: netlink attribute
+ */
+static inline int nla_type(const struct nlattr *nla)
+{
+	return nla->nla_type & NLA_TYPE_MASK;
+}
+
+/**
+ * nla_data - head of payload
+ * @nla: netlink attribute
+ */
+static inline void *nla_data(const struct nlattr *nla)
+{
+	return (char *) nla + NLA_HDRLEN;
+}
+
+/**
+ * nla_len - length of payload
+ * @nla: netlink attribute
+ */
+static inline int nla_len(const struct nlattr *nla)
+{
+	return nla->nla_len - NLA_HDRLEN;
+}
+
+/**
+ * nla_ok - check if the netlink attribute fits into the remaining bytes
+ * @nla: netlink attribute
+ * @remaining: number of bytes remaining in attribute stream
+ */
+static inline int nla_ok(const struct nlattr *nla, int remaining)
+{
+	return remaining >= (int) sizeof(*nla) &&
+	       nla->nla_len >= sizeof(*nla) &&
+	       nla->nla_len <= remaining;
+}
+
+/**
+ * nla_next - next netlink attribute in attribute stream
+ * @nla: netlink attribute
+ * @remaining: number of bytes remaining in attribute stream
+ *
+ * Returns the next netlink attribute in the attribute stream and
+ * decrements remaining by the size of the current attribute.
+ */
+static inline struct nlattr *nla_next(const struct nlattr *nla, int *remaining)
+{
+	int totlen = NLA_ALIGN(nla->nla_len);
+
+	*remaining -= totlen;
+	return (struct nlattr *) ((char *) nla + totlen);
+}
+
+/**
+ * nla_find_nested - find attribute in a set of nested attributes
+ * @nla: attribute containing the nested attributes
+ * @attrtype: type of attribute to look for
+ *
+ * Returns the first attribute which matches the specified type.
+ */
+static inline struct nlattr *
+nla_find_nested(const struct nlattr *nla, int attrtype)
+{
+	return nla_find(nla_data(nla), nla_len(nla), attrtype);
+}
+
+/**
+ * nla_parse_nested - parse nested attributes
+ * @tb: destination array with maxtype+1 elements
+ * @maxtype: maximum attribute type to be expected
+ * @nla: attribute containing the nested attributes
+ * @policy: validation policy
+ *
+ * See nla_parse()
+ */
+static inline int nla_parse_nested(struct nlattr *tb[], int maxtype,
+				   const struct nlattr *nla,
+				   const struct nla_policy *policy)
+{
+	return nla_parse(tb, maxtype, nla_data(nla), nla_len(nla), policy);
+}
+
+/**
+ * nla_put_u8 - Add a u8 netlink attribute to a socket buffer
+ * @skb: socket buffer to add attribute to
+ * @attrtype: attribute type
+ * @value: numeric value
+ */
+static inline int nla_put_u8(struct sk_buff *skb, int attrtype, u8 value)
+{
+	return nla_put(skb, attrtype, sizeof(u8), &value);
+}
+
+/**
+ * nla_put_u16 - Add a u16 netlink attribute to a socket buffer
+ * @skb: socket buffer to add attribute to
+ * @attrtype: attribute type
+ * @value: numeric value
+ */
+static inline int nla_put_u16(struct sk_buff *skb, int attrtype, u16 value)
+{
+	return nla_put(skb, attrtype, sizeof(u16), &value);
+}
+
+/**
+ * nla_put_u32 - Add a u32 netlink attribute to a socket buffer
+ * @skb: socket buffer to add attribute to
+ * @attrtype: attribute type
+ * @value: numeric value
+ */
+static inline int nla_put_u32(struct sk_buff *skb, int attrtype, u32 value)
+{
+	return nla_put(skb, attrtype, sizeof(u32), &value);
+}
+
+/**
+ * nla_put_64 - Add a u64 netlink attribute to a socket buffer
+ * @skb: socket buffer to add attribute to
+ * @attrtype: attribute type
+ * @value: numeric value
+ */
+static inline int nla_put_u64(struct sk_buff *skb, int attrtype, u64 value)
+{
+	return nla_put(skb, attrtype, sizeof(u64), &value);
+}
+
+/**
+ * nla_put_string - Add a string netlink attribute to a socket buffer
+ * @skb: socket buffer to add attribute to
+ * @attrtype: attribute type
+ * @str: NUL terminated string
+ */
+static inline int nla_put_string(struct sk_buff *skb, int attrtype,
+				 const char *str)
+{
+	return nla_put(skb, attrtype, strlen(str) + 1, str);
+}
+
+/**
+ * nla_put_flag - Add a flag netlink attribute to a socket buffer
+ * @skb: socket buffer to add attribute to
+ * @attrtype: attribute type
+ */
+static inline int nla_put_flag(struct sk_buff *skb, int attrtype)
+{
+	return nla_put(skb, attrtype, 0, NULL);
+}
+
+/**
+ * nla_put_msecs - Add a msecs netlink attribute to a socket buffer
+ * @skb: socket buffer to add attribute to
+ * @attrtype: attribute type
+ * @jiffies: number of msecs in jiffies
+ */
+static inline int nla_put_msecs(struct sk_buff *skb, int attrtype,
+				unsigned long jiffies)
+{
+	u64 tmp = jiffies_to_msecs(jiffies);
+	return nla_put(skb, attrtype, sizeof(u64), &tmp);
+}
+
+#define NLA_PUT(skb, attrtype, attrlen, data) \
+	do { \
+		if (unlikely(nla_put(skb, attrtype, attrlen, data) < 0)) \
+			goto nla_put_failure; \
+	} while(0)
+
+#define NLA_PUT_TYPE(skb, type, attrtype, value) \
+	do { \
+		type __tmp = value; \
+		NLA_PUT(skb, attrtype, sizeof(type), &__tmp); \
+	} while(0)
+
+#define NLA_PUT_U8(skb, attrtype, value) \
+	NLA_PUT_TYPE(skb, u8, attrtype, value)
+
+#define NLA_PUT_U16(skb, attrtype, value) \
+	NLA_PUT_TYPE(skb, u16, attrtype, value)
+
+#define NLA_PUT_LE16(skb, attrtype, value) \
+	NLA_PUT_TYPE(skb, __le16, attrtype, value)
+
+#define NLA_PUT_BE16(skb, attrtype, value) \
+	NLA_PUT_TYPE(skb, __be16, attrtype, value)
+
+#define NLA_PUT_NET16(skb, attrtype, value) \
+	NLA_PUT_BE16(skb, attrtype | NLA_F_NET_BYTEORDER, value)
+
+#define NLA_PUT_U32(skb, attrtype, value) \
+	NLA_PUT_TYPE(skb, u32, attrtype, value)
+
+#define NLA_PUT_BE32(skb, attrtype, value) \
+	NLA_PUT_TYPE(skb, __be32, attrtype, value)
+
+#define NLA_PUT_NET32(skb, attrtype, value) \
+	NLA_PUT_BE32(skb, attrtype | NLA_F_NET_BYTEORDER, value)
+
+#define NLA_PUT_U64(skb, attrtype, value) \
+	NLA_PUT_TYPE(skb, u64, attrtype, value)
+
+#define NLA_PUT_BE64(skb, attrtype, value) \
+	NLA_PUT_TYPE(skb, __be64, attrtype, value)
+
+#define NLA_PUT_NET64(skb, attrtype, value) \
+	NLA_PUT_BE64(skb, attrtype | NLA_F_NET_BYTEORDER, value)
+
+#define NLA_PUT_STRING(skb, attrtype, value) \
+	NLA_PUT(skb, attrtype, strlen(value) + 1, value)
+
+#define NLA_PUT_FLAG(skb, attrtype) \
+	NLA_PUT(skb, attrtype, 0, NULL)
+
+#define NLA_PUT_MSECS(skb, attrtype, jiffies) \
+	NLA_PUT_U64(skb, attrtype, jiffies_to_msecs(jiffies))
+
+/**
+ * nla_get_u32 - return payload of u32 attribute
+ * @nla: u32 netlink attribute
+ */
+static inline u32 nla_get_u32(const struct nlattr *nla)
+{
+	return *(u32 *) nla_data(nla);
+}
+
+/**
+ * nla_get_be32 - return payload of __be32 attribute
+ * @nla: __be32 netlink attribute
+ */
+static inline __be32 nla_get_be32(const struct nlattr *nla)
+{
+	return *(__be32 *) nla_data(nla);
+}
+
+/**
+ * nla_get_u16 - return payload of u16 attribute
+ * @nla: u16 netlink attribute
+ */
+static inline u16 nla_get_u16(const struct nlattr *nla)
+{
+	return *(u16 *) nla_data(nla);
+}
+
+/**
+ * nla_get_be16 - return payload of __be16 attribute
+ * @nla: __be16 netlink attribute
+ */
+static inline __be16 nla_get_be16(const struct nlattr *nla)
+{
+	return *(__be16 *) nla_data(nla);
+}
+
+/**
+ * nla_get_le16 - return payload of __le16 attribute
+ * @nla: __le16 netlink attribute
+ */
+static inline __le16 nla_get_le16(const struct nlattr *nla)
+{
+	return *(__le16 *) nla_data(nla);
+}
+
+/**
+ * nla_get_u8 - return payload of u8 attribute
+ * @nla: u8 netlink attribute
+ */
+static inline u8 nla_get_u8(const struct nlattr *nla)
+{
+	return *(u8 *) nla_data(nla);
+}
+
+/**
+ * nla_get_u64 - return payload of u64 attribute
+ * @nla: u64 netlink attribute
+ */
+static inline u64 nla_get_u64(const struct nlattr *nla)
+{
+	u64 tmp;
+
+	nla_memcpy(&tmp, nla, sizeof(tmp));
+
+	return tmp;
+}
+
+/**
+ * nla_get_be64 - return payload of __be64 attribute
+ * @nla: __be64 netlink attribute
+ */
+static inline __be64 nla_get_be64(const struct nlattr *nla)
+{
+	__be64 tmp;
+
+	nla_memcpy(&tmp, nla, sizeof(tmp));
+
+	return tmp;
+}
+
+/**
+ * nla_get_flag - return payload of flag attribute
+ * @nla: flag netlink attribute
+ */
+static inline int nla_get_flag(const struct nlattr *nla)
+{
+	return !!nla;
+}
+
+/**
+ * nla_get_msecs - return payload of msecs attribute
+ * @nla: msecs netlink attribute
+ *
+ * Returns the number of milliseconds in jiffies.
+ */
+static inline unsigned long nla_get_msecs(const struct nlattr *nla)
+{
+	u64 msecs = nla_get_u64(nla);
+
+	return msecs_to_jiffies((unsigned long) msecs);
+}
+
+/**
+ * nla_nest_start - Start a new level of nested attributes
+ * @skb: socket buffer to add attributes to
+ * @attrtype: attribute type of container
+ *
+ * Returns the container attribute
+ */
+static inline struct nlattr *nla_nest_start(struct sk_buff *skb, int attrtype)
+{
+	struct nlattr *start = (struct nlattr *)skb_tail_pointer(skb);
+
+	if (nla_put(skb, attrtype, 0, NULL) < 0)
+		return NULL;
+
+	return start;
+}
+
+/**
+ * nla_nest_end - Finalize nesting of attributes
+ * @skb: socket buffer the attributes are stored in
+ * @start: container attribute
+ *
+ * Corrects the container attribute header to include the all
+ * appeneded attributes.
+ *
+ * Returns the total data length of the skb.
+ */
+static inline int nla_nest_end(struct sk_buff *skb, struct nlattr *start)
+{
+	start->nla_len = skb_tail_pointer(skb) - (unsigned char *)start;
+	return skb->len;
+}
+
+/**
+ * nla_nest_cancel - Cancel nesting of attributes
+ * @skb: socket buffer the message is stored in
+ * @start: container attribute
+ *
+ * Removes the container attribute and including all nested
+ * attributes. Returns -EMSGSIZE
+ */
+static inline void nla_nest_cancel(struct sk_buff *skb, struct nlattr *start)
+{
+	nlmsg_trim(skb, start);
+}
+
+/**
+ * nla_validate_nested - Validate a stream of nested attributes
+ * @start: container attribute
+ * @maxtype: maximum attribute type to be expected
+ * @policy: validation policy
+ *
+ * Validates all attributes in the nested attribute stream against the
+ * specified policy. Attributes with a type exceeding maxtype will be
+ * ignored. See documenation of struct nla_policy for more details.
+ *
+ * Returns 0 on success or a negative error code.
+ */
+static inline int nla_validate_nested(const struct nlattr *start, int maxtype,
+				      const struct nla_policy *policy)
+{
+	return nla_validate(nla_data(start), nla_len(start), maxtype, policy);
+}
+
+/**
+ * nla_for_each_attr - iterate over a stream of attributes
+ * @pos: loop counter, set to current attribute
+ * @head: head of attribute stream
+ * @len: length of attribute stream
+ * @rem: initialized to len, holds bytes currently remaining in stream
+ */
+#define nla_for_each_attr(pos, head, len, rem) \
+	for (pos = head, rem = len; \
+	     nla_ok(pos, rem); \
+	     pos = nla_next(pos, &(rem)))
+
+/**
+ * nla_for_each_nested - iterate over nested attributes
+ * @pos: loop counter, set to current attribute
+ * @nla: attribute containing the nested attributes
+ * @rem: initialized to len, holds bytes currently remaining in stream
+ */
+#define nla_for_each_nested(pos, nla, rem) \
+	nla_for_each_attr(pos, nla_data(nla), nla_len(nla), rem)
+
+#endif
diff --git a/include/net/netns/conntrack.h b/include/net/netns/conntrack.h
new file mode 100644
index 00000000..7a911eca
--- /dev/null
+++ b/include/net/netns/conntrack.h
@@ -0,0 +1,37 @@
+#ifndef __NETNS_CONNTRACK_H
+#define __NETNS_CONNTRACK_H
+
+#include <linux/list.h>
+#include <linux/list_nulls.h>
+#include <linux/atomic.h>
+
+struct ctl_table_header;
+struct nf_conntrack_ecache;
+
+struct netns_ct {
+	atomic_t		count;
+	unsigned int		expect_count;
+	unsigned int		htable_size;
+	struct kmem_cache	*nf_conntrack_cachep;
+	struct hlist_nulls_head	*hash;
+	struct hlist_head	*expect_hash;
+	struct hlist_nulls_head	unconfirmed;
+	struct hlist_nulls_head	dying;
+	struct ip_conntrack_stat __percpu *stat;
+	struct nf_ct_event_notifier __rcu *nf_conntrack_event_cb;
+	struct nf_exp_event_notifier __rcu *nf_expect_event_cb;
+	int			sysctl_events;
+	unsigned int		sysctl_events_retry_timeout;
+	int			sysctl_acct;
+	int			sysctl_tstamp;
+	int			sysctl_checksum;
+	unsigned int		sysctl_log_invalid; /* Log invalid packets */
+#ifdef CONFIG_SYSCTL
+	struct ctl_table_header	*sysctl_header;
+	struct ctl_table_header	*acct_sysctl_header;
+	struct ctl_table_header	*tstamp_sysctl_header;
+	struct ctl_table_header	*event_sysctl_header;
+#endif
+	char			*slabname;
+};
+#endif
diff --git a/include/net/netns/core.h b/include/net/netns/core.h
new file mode 100644
index 00000000..78eb1ff7
--- /dev/null
+++ b/include/net/netns/core.h
@@ -0,0 +1,16 @@
+#ifndef __NETNS_CORE_H__
+#define __NETNS_CORE_H__
+
+struct ctl_table_header;
+struct prot_inuse;
+
+struct netns_core {
+	/* core sysctls */
+	struct ctl_table_header	*sysctl_hdr;
+
+	int	sysctl_somaxconn;
+
+	struct prot_inuse __percpu *inuse;
+};
+
+#endif
diff --git a/include/net/netns/dccp.h b/include/net/netns/dccp.h
new file mode 100644
index 00000000..98d2a7ce
--- /dev/null
+++ b/include/net/netns/dccp.h
@@ -0,0 +1,11 @@
+#ifndef __NETNS_DCCP_H__
+#define __NETNS_DCCP_H__
+
+struct sock;
+
+struct netns_dccp {
+	struct sock *v4_ctl_sk;
+	struct sock *v6_ctl_sk;
+};
+
+#endif
diff --git a/include/net/netns/generic.h b/include/net/netns/generic.h
new file mode 100644
index 00000000..0931618c
--- /dev/null
+++ b/include/net/netns/generic.h
@@ -0,0 +1,48 @@
+/*
+ * generic net pointers
+ */
+
+#ifndef __NET_GENERIC_H__
+#define __NET_GENERIC_H__
+
+#include <linux/bug.h>
+#include <linux/rcupdate.h>
+
+/*
+ * Generic net pointers are to be used by modules to put some private
+ * stuff on the struct net without explicit struct net modification
+ *
+ * The rules are simple:
+ * 1. set pernet_operations->id.  After register_pernet_device you
+ *    will have the id of your private pointer.
+ * 2. set pernet_operations->size to have the code allocate and free
+ *    a private structure pointed to from struct net.
+ * 3. do not change this pointer while the net is alive;
+ * 4. do not try to have any private reference on the net_generic object.
+ *
+ * After accomplishing all of the above, the private pointer can be
+ * accessed with the net_generic() call.
+ */
+
+struct net_generic {
+	unsigned int len;
+	struct rcu_head rcu;
+
+	void *ptr[0];
+};
+
+static inline void *net_generic(const struct net *net, int id)
+{
+	struct net_generic *ng;
+	void *ptr;
+
+	rcu_read_lock();
+	ng = rcu_dereference(net->gen);
+	BUG_ON(id == 0 || id > ng->len);
+	ptr = ng->ptr[id - 1];
+	rcu_read_unlock();
+
+	BUG_ON(!ptr);
+	return ptr;
+}
+#endif
diff --git a/include/net/netns/hash.h b/include/net/netns/hash.h
new file mode 100644
index 00000000..548d78f2
--- /dev/null
+++ b/include/net/netns/hash.h
@@ -0,0 +1,21 @@
+#ifndef __NET_NS_HASH_H__
+#define __NET_NS_HASH_H__
+
+#include <asm/cache.h>
+
+struct net;
+
+static inline unsigned net_hash_mix(struct net *net)
+{
+#ifdef CONFIG_NET_NS
+	/*
+	 * shift this right to eliminate bits, that are
+	 * always zeroed
+	 */
+
+	return (unsigned)(((unsigned long)net) >> L1_CACHE_SHIFT);
+#else
+	return 0;
+#endif
+}
+#endif
diff --git a/include/net/netns/ipv4.h b/include/net/netns/ipv4.h
new file mode 100644
index 00000000..bbd023a1
--- /dev/null
+++ b/include/net/netns/ipv4.h
@@ -0,0 +1,72 @@
+/*
+ * ipv4 in net namespaces
+ */
+
+#ifndef __NETNS_IPV4_H__
+#define __NETNS_IPV4_H__
+
+#include <net/inet_frag.h>
+
+struct ctl_table_header;
+struct ipv4_devconf;
+struct fib_rules_ops;
+struct hlist_head;
+struct sock;
+
+struct netns_ipv4 {
+#ifdef CONFIG_SYSCTL
+	struct ctl_table_header	*forw_hdr;
+	struct ctl_table_header	*frags_hdr;
+	struct ctl_table_header	*ipv4_hdr;
+	struct ctl_table_header *route_hdr;
+#endif
+	struct ipv4_devconf	*devconf_all;
+	struct ipv4_devconf	*devconf_dflt;
+#ifdef CONFIG_IP_MULTIPLE_TABLES
+	struct fib_rules_ops	*rules_ops;
+#endif
+	struct hlist_head	*fib_table_hash;
+	struct sock		*fibnl;
+
+	struct sock		**icmp_sk;
+	struct sock		*tcp_sock;
+
+	struct netns_frags	frags;
+#ifdef CONFIG_NETFILTER
+	struct xt_table		*iptable_filter;
+	struct xt_table		*iptable_mangle;
+	struct xt_table		*iptable_raw;
+	struct xt_table		*arptable_filter;
+#ifdef CONFIG_SECURITY
+	struct xt_table		*iptable_security;
+#endif
+	struct xt_table		*nat_table;
+	struct hlist_head	*nat_bysource;
+	unsigned int		nat_htable_size;
+#endif
+
+	int sysctl_icmp_echo_ignore_all;
+	int sysctl_icmp_echo_ignore_broadcasts;
+	int sysctl_icmp_ignore_bogus_error_responses;
+	int sysctl_icmp_ratelimit;
+	int sysctl_icmp_ratemask;
+	int sysctl_icmp_errors_use_inbound_ifaddr;
+	int sysctl_rt_cache_rebuild_count;
+	int current_rt_cache_rebuild_count;
+
+	unsigned int sysctl_ping_group_range[2];
+	long sysctl_tcp_mem[3];
+
+	atomic_t rt_genid;
+	atomic_t dev_addr_genid;
+
+#ifdef CONFIG_IP_MROUTE
+#ifndef CONFIG_IP_MROUTE_MULTIPLE_TABLES
+	struct mr_table		*mrt;
+#else
+	struct list_head	mr_tables;
+	struct fib_rules_ops	*mr_rules_ops;
+#endif
+#endif
+};
+#endif
diff --git a/include/net/netns/ipv6.h b/include/net/netns/ipv6.h
new file mode 100644
index 00000000..81abfcb2
--- /dev/null
+++ b/include/net/netns/ipv6.h
@@ -0,0 +1,70 @@
+/*
+ * ipv6 in net namespaces
+ */
+
+#include <net/inet_frag.h>
+
+#ifndef __NETNS_IPV6_H__
+#define __NETNS_IPV6_H__
+#include <net/dst_ops.h>
+
+struct ctl_table_header;
+
+struct netns_sysctl_ipv6 {
+#ifdef CONFIG_SYSCTL
+	struct ctl_table_header *table;
+	struct ctl_table_header *frags_hdr;
+#endif
+	int bindv6only;
+	int flush_delay;
+	int ip6_rt_max_size;
+	int ip6_rt_gc_min_interval;
+	int ip6_rt_gc_timeout;
+	int ip6_rt_gc_interval;
+	int ip6_rt_gc_elasticity;
+	int ip6_rt_mtu_expires;
+	int ip6_rt_min_advmss;
+	int icmpv6_time;
+};
+
+struct netns_ipv6 {
+	struct netns_sysctl_ipv6 sysctl;
+	struct ipv6_devconf	*devconf_all;
+	struct ipv6_devconf	*devconf_dflt;
+	struct netns_frags	frags;
+#ifdef CONFIG_NETFILTER
+	struct xt_table		*ip6table_filter;
+	struct xt_table		*ip6table_mangle;
+	struct xt_table		*ip6table_raw;
+#ifdef CONFIG_SECURITY
+	struct xt_table		*ip6table_security;
+#endif
+#endif
+	struct rt6_info         *ip6_null_entry;
+	struct rt6_statistics   *rt6_stats;
+	struct timer_list       ip6_fib_timer;
+	struct hlist_head       *fib_table_hash;
+	struct fib6_table       *fib6_main_tbl;
+	struct dst_ops		ip6_dst_ops;
+	unsigned int		 ip6_rt_gc_expire;
+	unsigned long		 ip6_rt_last_gc;
+#ifdef CONFIG_IPV6_MULTIPLE_TABLES
+	struct rt6_info         *ip6_prohibit_entry;
+	struct rt6_info         *ip6_blk_hole_entry;
+	struct fib6_table       *fib6_local_tbl;
+	struct fib_rules_ops    *fib6_rules_ops;
+#endif
+	struct sock		**icmp_sk;
+	struct sock             *ndisc_sk;
+	struct sock             *tcp_sk;
+	struct sock             *igmp_sk;
+#ifdef CONFIG_IPV6_MROUTE
+#ifndef CONFIG_IPV6_MROUTE_MULTIPLE_TABLES
+	struct mr6_table	*mrt6;
+#else
+	struct list_head	mr6_tables;
+	struct fib_rules_ops	*mr6_rules_ops;
+#endif
+#endif
+};
+#endif
diff --git a/include/net/netns/mib.h b/include/net/netns/mib.h
new file mode 100644
index 00000000..d542a4b2
--- /dev/null
+++ b/include/net/netns/mib.h
@@ -0,0 +1,28 @@
+#ifndef __NETNS_MIB_H__
+#define __NETNS_MIB_H__
+
+#include <net/snmp.h>
+
+struct netns_mib {
+	DEFINE_SNMP_STAT(struct tcp_mib, tcp_statistics);
+	DEFINE_SNMP_STAT(struct ipstats_mib, ip_statistics);
+	DEFINE_SNMP_STAT(struct linux_mib, net_statistics);
+	DEFINE_SNMP_STAT(struct udp_mib, udp_statistics);
+	DEFINE_SNMP_STAT(struct udp_mib, udplite_statistics);
+	DEFINE_SNMP_STAT(struct icmp_mib, icmp_statistics);
+	DEFINE_SNMP_STAT_ATOMIC(struct icmpmsg_mib, icmpmsg_statistics);
+
+#if IS_ENABLED(CONFIG_IPV6)
+	struct proc_dir_entry *proc_net_devsnmp6;
+	DEFINE_SNMP_STAT(struct udp_mib, udp_stats_in6);
+	DEFINE_SNMP_STAT(struct udp_mib, udplite_stats_in6);
+	DEFINE_SNMP_STAT(struct ipstats_mib, ipv6_statistics);
+	DEFINE_SNMP_STAT(struct icmpv6_mib, icmpv6_statistics);
+	DEFINE_SNMP_STAT_ATOMIC(struct icmpv6msg_mib, icmpv6msg_statistics);
+#endif
+#ifdef CONFIG_XFRM_STATISTICS
+	DEFINE_SNMP_STAT(struct linux_xfrm_mib, xfrm_statistics);
+#endif
+};
+
+#endif
diff --git a/include/net/netns/packet.h b/include/net/netns/packet.h
new file mode 100644
index 00000000..cb4e894c
--- /dev/null
+++ b/include/net/netns/packet.h
@@ -0,0 +1,15 @@
+/*
+ * Packet network namespace
+ */
+#ifndef __NETNS_PACKET_H__
+#define __NETNS_PACKET_H__
+
+#include <linux/rculist.h>
+#include <linux/spinlock.h>
+
+struct netns_packet {
+	spinlock_t		sklist_lock;
+	struct hlist_head	sklist;
+};
+
+#endif /* __NETNS_PACKET_H__ */
diff --git a/include/net/netns/unix.h b/include/net/netns/unix.h
new file mode 100644
index 00000000..284649d4
--- /dev/null
+++ b/include/net/netns/unix.h
@@ -0,0 +1,13 @@
+/*
+ * Unix network namespace
+ */
+#ifndef __NETNS_UNIX_H__
+#define __NETNS_UNIX_H__
+
+struct ctl_table_header;
+struct netns_unix {
+	int			sysctl_max_dgram_qlen;
+	struct ctl_table_header	*ctl;
+};
+
+#endif /* __NETNS_UNIX_H__ */
diff --git a/include/net/netns/x_tables.h b/include/net/netns/x_tables.h
new file mode 100644
index 00000000..591db7d6
--- /dev/null
+++ b/include/net/netns/x_tables.h
@@ -0,0 +1,18 @@
+#ifndef __NETNS_X_TABLES_H
+#define __NETNS_X_TABLES_H
+
+#include <linux/list.h>
+#include <linux/netfilter.h>
+
+struct ebt_table;
+
+struct netns_xt {
+	struct list_head tables[NFPROTO_NUMPROTO];
+#if defined(CONFIG_BRIDGE_NF_EBTABLES) || \
+    defined(CONFIG_BRIDGE_NF_EBTABLES_MODULE)
+	struct ebt_table *broute_table;
+	struct ebt_table *frame_filter;
+	struct ebt_table *frame_nat;
+#endif
+};
+#endif
diff --git a/include/net/netns/xfrm.h b/include/net/netns/xfrm.h
new file mode 100644
index 00000000..5299e69a
--- /dev/null
+++ b/include/net/netns/xfrm.h
@@ -0,0 +1,64 @@
+#ifndef __NETNS_XFRM_H
+#define __NETNS_XFRM_H
+
+#include <linux/list.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+#include <linux/xfrm.h>
+#include <net/dst_ops.h>
+
+struct ctl_table_header;
+
+struct xfrm_policy_hash {
+	struct hlist_head	*table;
+	unsigned int		hmask;
+};
+
+struct netns_xfrm {
+	struct list_head	state_all;
+	/*
+	 * Hash table to find appropriate SA towards given target (endpoint of
+	 * tunnel or destination of transport mode) allowed by selector.
+	 *
+	 * Main use is finding SA after policy selected tunnel or transport
+	 * mode. Also, it can be used by ah/esp icmp error handler to find
+	 * offending SA.
+	 */
+	struct hlist_head	*state_bydst;
+	struct hlist_head	*state_bysrc;
+	struct hlist_head	*state_byspi;
+	unsigned int		state_hmask;
+	unsigned int		state_num;
+	struct work_struct	state_hash_work;
+	struct hlist_head	state_gc_list;
+	struct work_struct	state_gc_work;
+
+	wait_queue_head_t	km_waitq;
+
+	struct list_head	policy_all;
+	struct hlist_head	*policy_byidx;
+	unsigned int		policy_idx_hmask;
+	struct hlist_head	policy_inexact[XFRM_POLICY_MAX * 2];
+	struct xfrm_policy_hash	policy_bydst[XFRM_POLICY_MAX * 2];
+	unsigned int		policy_count[XFRM_POLICY_MAX * 2];
+	struct work_struct	policy_hash_work;
+
+
+	struct sock		*nlsk;
+	struct sock		*nlsk_stash;
+
+	u32			sysctl_aevent_etime;
+	u32			sysctl_aevent_rseqth;
+	int			sysctl_larval_drop;
+	u32			sysctl_acq_expires;
+#ifdef CONFIG_SYSCTL
+	struct ctl_table_header	*sysctl_hdr;
+#endif
+
+	struct dst_ops		xfrm4_dst_ops;
+#if IS_ENABLED(CONFIG_IPV6)
+	struct dst_ops		xfrm6_dst_ops;
+#endif
+};
+
+#endif
diff --git a/include/net/netprio_cgroup.h b/include/net/netprio_cgroup.h
new file mode 100644
index 00000000..d58fdec4
--- /dev/null
+++ b/include/net/netprio_cgroup.h
@@ -0,0 +1,88 @@
+/*
+ * netprio_cgroup.h			Control Group Priority set
+ *
+ *
+ * Authors:	Neil Horman <nhorman@tuxdriver.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+
+#ifndef _NETPRIO_CGROUP_H
+#define _NETPRIO_CGROUP_H
+#include <linux/cgroup.h>
+#include <linux/hardirq.h>
+#include <linux/rcupdate.h>
+
+
+struct netprio_map {
+	struct rcu_head rcu;
+	u32 priomap_len;
+	u32 priomap[];
+};
+
+#ifdef CONFIG_CGROUPS
+
+struct cgroup_netprio_state {
+	struct cgroup_subsys_state css;
+	u32 prioidx;
+};
+
+#ifndef CONFIG_NETPRIO_CGROUP
+extern int net_prio_subsys_id;
+#endif
+
+extern void sock_update_netprioidx(struct sock *sk);
+
+#if IS_BUILTIN(CONFIG_NETPRIO_CGROUP)
+
+static inline u32 task_netprioidx(struct task_struct *p)
+{
+	struct cgroup_netprio_state *state;
+	u32 idx;
+
+	rcu_read_lock();
+	state = container_of(task_subsys_state(p, net_prio_subsys_id),
+			     struct cgroup_netprio_state, css);
+	idx = state->prioidx;
+	rcu_read_unlock();
+	return idx;
+}
+
+#elif IS_MODULE(CONFIG_NETPRIO_CGROUP)
+
+static inline u32 task_netprioidx(struct task_struct *p)
+{
+	struct cgroup_netprio_state *state;
+	int subsys_id;
+	u32 idx = 0;
+
+	rcu_read_lock();
+	subsys_id = rcu_dereference_index_check(net_prio_subsys_id,
+						rcu_read_lock_held());
+	if (subsys_id >= 0) {
+		state = container_of(task_subsys_state(p, subsys_id),
+				     struct cgroup_netprio_state, css);
+		idx = state->prioidx;
+	}
+	rcu_read_unlock();
+	return idx;
+}
+
+#else
+
+static inline u32 task_netprioidx(struct task_struct *p)
+{
+	return 0;
+}
+
+#endif /* CONFIG_NETPRIO_CGROUP */
+
+#else
+#define sock_update_netprioidx(sk)
+#endif
+
+#endif  /* _NET_CLS_CGROUP_H */
diff --git a/include/net/netrom.h b/include/net/netrom.h
new file mode 100644
index 00000000..f0793c1c
--- /dev/null
+++ b/include/net/netrom.h
@@ -0,0 +1,270 @@
+/*
+ *	Declarations of NET/ROM type objects.
+ *
+ *	Jonathan Naylor G4KLX	9/4/95
+ */
+
+#ifndef _NETROM_H
+#define _NETROM_H 
+
+#include <linux/netrom.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <net/sock.h>
+
+#define	NR_NETWORK_LEN			15
+#define	NR_TRANSPORT_LEN		5
+
+#define	NR_PROTO_IP			0x0C
+
+#define	NR_PROTOEXT			0x00
+#define	NR_CONNREQ			0x01
+#define	NR_CONNACK			0x02
+#define	NR_DISCREQ			0x03
+#define	NR_DISCACK			0x04
+#define	NR_INFO				0x05
+#define	NR_INFOACK			0x06
+#define	NR_RESET			0x07
+
+#define	NR_CHOKE_FLAG			0x80
+#define	NR_NAK_FLAG			0x40
+#define	NR_MORE_FLAG			0x20
+
+/* Define Link State constants. */
+enum {
+	NR_STATE_0,
+	NR_STATE_1,
+	NR_STATE_2,
+	NR_STATE_3
+};
+
+#define	NR_COND_ACK_PENDING		0x01
+#define	NR_COND_REJECT			0x02
+#define	NR_COND_PEER_RX_BUSY		0x04
+#define	NR_COND_OWN_RX_BUSY		0x08
+
+#define NR_DEFAULT_T1			120000		/* Outstanding frames - 120 seconds */
+#define NR_DEFAULT_T2			5000		/* Response delay     - 5 seconds */
+#define NR_DEFAULT_N2			3		/* Number of Retries - 3 */
+#define	NR_DEFAULT_T4			180000		/* Busy Delay - 180 seconds */
+#define	NR_DEFAULT_IDLE			0		/* No Activity Timeout - none */
+#define	NR_DEFAULT_WINDOW		4		/* Default Window Size - 4 */
+#define	NR_DEFAULT_OBS			6		/* Default Obsolescence Count - 6 */
+#define	NR_DEFAULT_QUAL			10		/* Default Neighbour Quality - 10 */
+#define	NR_DEFAULT_TTL			16		/* Default Time To Live - 16 */
+#define	NR_DEFAULT_ROUTING		1		/* Is routing enabled ? */
+#define	NR_DEFAULT_FAILS		2		/* Link fails until route fails */
+#define	NR_DEFAULT_RESET		0		/* Sent / accept reset cmds? */
+
+#define NR_MODULUS 			256
+#define NR_MAX_WINDOW_SIZE		127			/* Maximum Window Allowable - 127 */
+#define	NR_MAX_PACKET_SIZE		236			/* Maximum Packet Length - 236 */
+
+struct nr_sock {
+	struct sock		sock;
+	ax25_address		user_addr, source_addr, dest_addr;
+	struct net_device		*device;
+	unsigned char		my_index,   my_id;
+	unsigned char		your_index, your_id;
+	unsigned char		state, condition, bpqext, window;
+	unsigned short		vs, vr, va, vl;
+	unsigned char		n2, n2count;
+	unsigned long		t1, t2, t4, idle;
+	unsigned short		fraglen;
+	struct timer_list	t1timer;
+	struct timer_list	t2timer;
+	struct timer_list	t4timer;
+	struct timer_list	idletimer;
+	struct sk_buff_head	ack_queue;
+	struct sk_buff_head	reseq_queue;
+	struct sk_buff_head	frag_queue;
+};
+
+#define nr_sk(sk) ((struct nr_sock *)(sk))
+
+struct nr_neigh {
+	struct hlist_node	neigh_node;
+	ax25_address		callsign;
+	ax25_digi		*digipeat;
+	ax25_cb			*ax25;
+	struct net_device	*dev;
+	unsigned char		quality;
+	unsigned char		locked;
+	unsigned short		count;
+	unsigned int		number;
+	unsigned char		failed;
+	atomic_t		refcount;
+};
+
+struct nr_route {
+	unsigned char   quality;
+	unsigned char   obs_count;
+	struct nr_neigh *neighbour;
+};
+
+struct nr_node {
+	struct hlist_node	node_node;
+	ax25_address		callsign;
+	char			mnemonic[7];
+	unsigned char		which;
+	unsigned char		count;
+	struct nr_route		routes[3];
+	atomic_t		refcount;
+	spinlock_t		node_lock;
+};
+
+/*********************************************************************
+ *	nr_node & nr_neigh lists, refcounting and locking
+ *********************************************************************/
+
+#define nr_node_hold(__nr_node) \
+	atomic_inc(&((__nr_node)->refcount))
+
+static __inline__ void nr_node_put(struct nr_node *nr_node)
+{
+	if (atomic_dec_and_test(&nr_node->refcount)) {
+		kfree(nr_node);
+	}
+}
+
+#define nr_neigh_hold(__nr_neigh) \
+	atomic_inc(&((__nr_neigh)->refcount))
+
+static __inline__ void nr_neigh_put(struct nr_neigh *nr_neigh)
+{
+	if (atomic_dec_and_test(&nr_neigh->refcount)) {
+		if (nr_neigh->ax25)
+			ax25_cb_put(nr_neigh->ax25);
+		kfree(nr_neigh->digipeat);
+		kfree(nr_neigh);
+	}
+}
+
+/* nr_node_lock and nr_node_unlock also hold/put the node's refcounter.
+ */
+static __inline__ void nr_node_lock(struct nr_node *nr_node)
+{
+	nr_node_hold(nr_node);
+	spin_lock_bh(&nr_node->node_lock);
+}
+
+static __inline__ void nr_node_unlock(struct nr_node *nr_node)
+{
+	spin_unlock_bh(&nr_node->node_lock);
+	nr_node_put(nr_node);
+}
+
+#define nr_neigh_for_each(__nr_neigh, node, list) \
+	hlist_for_each_entry(__nr_neigh, node, list, neigh_node)
+
+#define nr_neigh_for_each_safe(__nr_neigh, node, node2, list) \
+	hlist_for_each_entry_safe(__nr_neigh, node, node2, list, neigh_node)
+
+#define nr_node_for_each(__nr_node, node, list) \
+	hlist_for_each_entry(__nr_node, node, list, node_node)
+
+#define nr_node_for_each_safe(__nr_node, node, node2, list) \
+	hlist_for_each_entry_safe(__nr_node, node, node2, list, node_node)
+
+
+/*********************************************************************/
+
+/* af_netrom.c */
+extern int  sysctl_netrom_default_path_quality;
+extern int  sysctl_netrom_obsolescence_count_initialiser;
+extern int  sysctl_netrom_network_ttl_initialiser;
+extern int  sysctl_netrom_transport_timeout;
+extern int  sysctl_netrom_transport_maximum_tries;
+extern int  sysctl_netrom_transport_acknowledge_delay;
+extern int  sysctl_netrom_transport_busy_delay;
+extern int  sysctl_netrom_transport_requested_window_size;
+extern int  sysctl_netrom_transport_no_activity_timeout;
+extern int  sysctl_netrom_routing_control;
+extern int  sysctl_netrom_link_fails_count;
+extern int  sysctl_netrom_reset_circuit;
+
+extern int  nr_rx_frame(struct sk_buff *, struct net_device *);
+extern void nr_destroy_socket(struct sock *);
+
+/* nr_dev.c */
+extern int  nr_rx_ip(struct sk_buff *, struct net_device *);
+extern void nr_setup(struct net_device *);
+
+/* nr_in.c */
+extern int  nr_process_rx_frame(struct sock *, struct sk_buff *);
+
+/* nr_loopback.c */
+extern void nr_loopback_init(void);
+extern void nr_loopback_clear(void);
+extern int  nr_loopback_queue(struct sk_buff *);
+
+/* nr_out.c */
+extern void nr_output(struct sock *, struct sk_buff *);
+extern void nr_send_nak_frame(struct sock *);
+extern void nr_kick(struct sock *);
+extern void nr_transmit_buffer(struct sock *, struct sk_buff *);
+extern void nr_establish_data_link(struct sock *);
+extern void nr_enquiry_response(struct sock *);
+extern void nr_check_iframes_acked(struct sock *, unsigned short);
+
+/* nr_route.c */
+extern void nr_rt_device_down(struct net_device *);
+extern struct net_device *nr_dev_first(void);
+extern struct net_device *nr_dev_get(ax25_address *);
+extern int  nr_rt_ioctl(unsigned int, void __user *);
+extern void nr_link_failed(ax25_cb *, int);
+extern int  nr_route_frame(struct sk_buff *, ax25_cb *);
+extern const struct file_operations nr_nodes_fops;
+extern const struct file_operations nr_neigh_fops;
+extern void nr_rt_free(void);
+
+/* nr_subr.c */
+extern void nr_clear_queues(struct sock *);
+extern void nr_frames_acked(struct sock *, unsigned short);
+extern void nr_requeue_frames(struct sock *);
+extern int  nr_validate_nr(struct sock *, unsigned short);
+extern int  nr_in_rx_window(struct sock *, unsigned short);
+extern void nr_write_internal(struct sock *, int);
+
+extern void __nr_transmit_reply(struct sk_buff *skb, int mine,
+	unsigned char cmdflags);
+
+/*
+ * This routine is called when a Connect Acknowledge with the Choke Flag
+ * set is needed to refuse a connection.
+ */
+#define nr_transmit_refusal(skb, mine)					\
+do {									\
+	__nr_transmit_reply((skb), (mine), NR_CONNACK | NR_CHOKE_FLAG);	\
+} while (0)
+
+/*
+ * This routine is called when we don't have a circuit matching an incoming
+ * NET/ROM packet.  This is an G8PZT Xrouter extension.
+ */
+#define nr_transmit_reset(skb, mine)					\
+do {									\
+	__nr_transmit_reply((skb), (mine), NR_RESET);			\
+} while (0)
+
+extern void nr_disconnect(struct sock *, int);
+
+/* nr_timer.c */
+extern void nr_init_timers(struct sock *sk);
+extern void nr_start_heartbeat(struct sock *);
+extern void nr_start_t1timer(struct sock *);
+extern void nr_start_t2timer(struct sock *);
+extern void nr_start_t4timer(struct sock *);
+extern void nr_start_idletimer(struct sock *);
+extern void nr_stop_heartbeat(struct sock *);
+extern void nr_stop_t1timer(struct sock *);
+extern void nr_stop_t2timer(struct sock *);
+extern void nr_stop_t4timer(struct sock *);
+extern void nr_stop_idletimer(struct sock *);
+extern int  nr_t1timer_running(struct sock *);
+
+/* sysctl_net_netrom.c */
+extern void nr_register_sysctl(void);
+extern void nr_unregister_sysctl(void);
+
+#endif
diff --git a/include/net/nexthop.h b/include/net/nexthop.h
new file mode 100644
index 00000000..3334dbfa
--- /dev/null
+++ b/include/net/nexthop.h
@@ -0,0 +1,33 @@
+#ifndef __NET_NEXTHOP_H
+#define __NET_NEXTHOP_H
+
+#include <linux/rtnetlink.h>
+#include <net/netlink.h>
+
+static inline int rtnh_ok(const struct rtnexthop *rtnh, int remaining)
+{
+	return remaining >= sizeof(*rtnh) &&
+	       rtnh->rtnh_len >= sizeof(*rtnh) &&
+	       rtnh->rtnh_len <= remaining;
+}
+
+static inline struct rtnexthop *rtnh_next(const struct rtnexthop *rtnh,
+                                         int *remaining)
+{
+	int totlen = NLA_ALIGN(rtnh->rtnh_len);
+
+	*remaining -= totlen;
+	return (struct rtnexthop *) ((char *) rtnh + totlen);
+}
+
+static inline struct nlattr *rtnh_attrs(const struct rtnexthop *rtnh)
+{
+	return (struct nlattr *) ((char *) rtnh + NLA_ALIGN(sizeof(*rtnh)));
+}
+
+static inline int rtnh_attrlen(const struct rtnexthop *rtnh)
+{
+	return rtnh->rtnh_len - NLA_ALIGN(sizeof(*rtnh));
+}
+
+#endif
diff --git a/include/net/nfc/nci.h b/include/net/nfc/nci.h
new file mode 100644
index 00000000..276094b9
--- /dev/null
+++ b/include/net/nfc/nci.h
@@ -0,0 +1,364 @@
+/*
+ *  The NFC Controller Interface is the communication protocol between an
+ *  NFC Controller (NFCC) and a Device Host (DH).
+ *
+ *  Copyright (C) 2011 Texas Instruments, Inc.
+ *
+ *  Written by Ilan Elias <ilane@ti.com>
+ *
+ *  Acknowledgements:
+ *  This file is based on hci.h, which was written
+ *  by Maxim Krasnyansky.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2
+ *  as published by the Free Software Foundation
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef __NCI_H
+#define __NCI_H
+
+/* NCI constants */
+#define NCI_MAX_NUM_MAPPING_CONFIGS				10
+#define NCI_MAX_NUM_RF_CONFIGS					10
+#define NCI_MAX_NUM_CONN					10
+
+/* NCI Status Codes */
+#define NCI_STATUS_OK						0x00
+#define NCI_STATUS_REJECTED					0x01
+#define NCI_STATUS_RF_FRAME_CORRUPTED				0x02
+#define NCI_STATUS_FAILED					0x03
+#define NCI_STATUS_NOT_INITIALIZED				0x04
+#define NCI_STATUS_SYNTAX_ERROR					0x05
+#define NCI_STATUS_SEMANTIC_ERROR				0x06
+#define NCI_STATUS_UNKNOWN_GID					0x07
+#define NCI_STATUS_UNKNOWN_OID					0x08
+#define NCI_STATUS_INVALID_PARAM				0x09
+#define NCI_STATUS_MESSAGE_SIZE_EXCEEDED			0x0a
+/* Discovery Specific Status Codes */
+#define NCI_STATUS_DISCOVERY_ALREADY_STARTED			0xa0
+#define NCI_STATUS_DISCOVERY_TARGET_ACTIVATION_FAILED		0xa1
+#define NCI_STATUS_DISCOVERY_TEAR_DOWN				0xa2
+/* RF Interface Specific Status Codes */
+#define NCI_STATUS_RF_TRANSMISSION_ERROR			0xb0
+#define NCI_STATUS_RF_PROTOCOL_ERROR				0xb1
+#define NCI_STATUS_RF_TIMEOUT_ERROR				0xb2
+/* NFCEE Interface Specific Status Codes */
+#define NCI_STATUS_NFCEE_INTERFACE_ACTIVATION_FAILED		0xc0
+#define NCI_STATUS_NFCEE_TRANSMISSION_ERROR			0xc1
+#define NCI_STATUS_NFCEE_PROTOCOL_ERROR				0xc2
+#define NCI_STATUS_NFCEE_TIMEOUT_ERROR				0xc3
+
+/* NCI RF Technology and Mode */
+#define NCI_NFC_A_PASSIVE_POLL_MODE				0x00
+#define NCI_NFC_B_PASSIVE_POLL_MODE				0x01
+#define NCI_NFC_F_PASSIVE_POLL_MODE				0x02
+#define NCI_NFC_A_ACTIVE_POLL_MODE				0x03
+#define NCI_NFC_F_ACTIVE_POLL_MODE				0x05
+#define NCI_NFC_15693_PASSIVE_POLL_MODE				0x06
+#define NCI_NFC_A_PASSIVE_LISTEN_MODE				0x80
+#define NCI_NFC_B_PASSIVE_LISTEN_MODE				0x81
+#define NCI_NFC_F_PASSIVE_LISTEN_MODE				0x82
+#define NCI_NFC_A_ACTIVE_LISTEN_MODE				0x83
+#define NCI_NFC_F_ACTIVE_LISTEN_MODE				0x85
+#define NCI_NFC_15693_PASSIVE_LISTEN_MODE			0x86
+
+/* NCI RF Technologies */
+#define NCI_NFC_RF_TECHNOLOGY_A					0x00
+#define NCI_NFC_RF_TECHNOLOGY_B					0x01
+#define NCI_NFC_RF_TECHNOLOGY_F					0x02
+#define NCI_NFC_RF_TECHNOLOGY_15693				0x03
+
+/* NCI Bit Rates */
+#define NCI_NFC_BIT_RATE_106					0x00
+#define NCI_NFC_BIT_RATE_212					0x01
+#define NCI_NFC_BIT_RATE_424					0x02
+#define NCI_NFC_BIT_RATE_848					0x03
+#define NCI_NFC_BIT_RATE_1695					0x04
+#define NCI_NFC_BIT_RATE_3390					0x05
+#define NCI_NFC_BIT_RATE_6780					0x06
+
+/* NCI RF Protocols */
+#define NCI_RF_PROTOCOL_UNKNOWN					0x00
+#define NCI_RF_PROTOCOL_T1T					0x01
+#define NCI_RF_PROTOCOL_T2T					0x02
+#define NCI_RF_PROTOCOL_T3T					0x03
+#define NCI_RF_PROTOCOL_ISO_DEP					0x04
+#define NCI_RF_PROTOCOL_NFC_DEP					0x05
+
+/* NCI RF Interfaces */
+#define NCI_RF_INTERFACE_NFCEE_DIRECT				0x00
+#define NCI_RF_INTERFACE_FRAME					0x01
+#define NCI_RF_INTERFACE_ISO_DEP				0x02
+#define NCI_RF_INTERFACE_NFC_DEP				0x03
+
+/* NCI Reset types */
+#define NCI_RESET_TYPE_KEEP_CONFIG				0x00
+#define NCI_RESET_TYPE_RESET_CONFIG				0x01
+
+/* NCI Static RF connection ID */
+#define NCI_STATIC_RF_CONN_ID					0x00
+
+/* NCI Data Flow Control */
+#define NCI_DATA_FLOW_CONTROL_NOT_USED				0xff
+
+/* NCI RF_DISCOVER_MAP_CMD modes */
+#define NCI_DISC_MAP_MODE_POLL					0x01
+#define NCI_DISC_MAP_MODE_LISTEN				0x02
+
+/* NCI Discover Notification Type */
+#define NCI_DISCOVER_NTF_TYPE_LAST				0x00
+#define NCI_DISCOVER_NTF_TYPE_LAST_NFCC				0x01
+#define NCI_DISCOVER_NTF_TYPE_MORE				0x02
+
+/* NCI Deactivation Type */
+#define NCI_DEACTIVATE_TYPE_IDLE_MODE				0x00
+#define NCI_DEACTIVATE_TYPE_SLEEP_MODE				0x01
+#define NCI_DEACTIVATE_TYPE_SLEEP_AF_MODE			0x02
+#define NCI_DEACTIVATE_TYPE_DISCOVERY				0x03
+
+/* Message Type (MT) */
+#define NCI_MT_DATA_PKT						0x00
+#define NCI_MT_CMD_PKT						0x01
+#define NCI_MT_RSP_PKT						0x02
+#define NCI_MT_NTF_PKT						0x03
+
+#define nci_mt(hdr)			(((hdr)[0]>>5)&0x07)
+#define nci_mt_set(hdr, mt)		((hdr)[0] |= (__u8)(((mt)&0x07)<<5))
+
+/* Packet Boundary Flag (PBF) */
+#define NCI_PBF_LAST						0x00
+#define NCI_PBF_CONT						0x01
+
+#define nci_pbf(hdr)			(__u8)(((hdr)[0]>>4)&0x01)
+#define nci_pbf_set(hdr, pbf)		((hdr)[0] |= (__u8)(((pbf)&0x01)<<4))
+
+/* Control Opcode manipulation */
+#define nci_opcode_pack(gid, oid)	(__u16)((((__u16)((gid)&0x0f))<<8)|\
+					((__u16)((oid)&0x3f)))
+#define nci_opcode(hdr)			nci_opcode_pack(hdr[0], hdr[1])
+#define nci_opcode_gid(op)		(__u8)(((op)&0x0f00)>>8)
+#define nci_opcode_oid(op)		(__u8)((op)&0x003f)
+
+/* Payload Length */
+#define nci_plen(hdr)			(__u8)((hdr)[2])
+
+/* Connection ID */
+#define nci_conn_id(hdr)		(__u8)(((hdr)[0])&0x0f)
+
+/* GID values */
+#define NCI_GID_CORE						0x0
+#define NCI_GID_RF_MGMT						0x1
+#define NCI_GID_NFCEE_MGMT					0x2
+#define NCI_GID_PROPRIETARY					0xf
+
+/* ---- NCI Packet structures ---- */
+#define NCI_CTRL_HDR_SIZE					3
+#define NCI_DATA_HDR_SIZE					3
+
+struct nci_ctrl_hdr {
+	__u8	gid;		/* MT & PBF & GID */
+	__u8	oid;
+	__u8	plen;
+} __packed;
+
+struct nci_data_hdr {
+	__u8	conn_id;	/* MT & PBF & ConnID */
+	__u8	rfu;
+	__u8	plen;
+} __packed;
+
+/* ------------------------ */
+/* -----  NCI Commands ---- */
+/* ------------------------ */
+#define NCI_OP_CORE_RESET_CMD		nci_opcode_pack(NCI_GID_CORE, 0x00)
+struct nci_core_reset_cmd {
+	__u8	reset_type;
+} __packed;
+
+#define NCI_OP_CORE_INIT_CMD		nci_opcode_pack(NCI_GID_CORE, 0x01)
+
+#define NCI_OP_RF_DISCOVER_MAP_CMD	nci_opcode_pack(NCI_GID_RF_MGMT, 0x00)
+struct disc_map_config {
+	__u8	rf_protocol;
+	__u8	mode;
+	__u8	rf_interface;
+} __packed;
+
+struct nci_rf_disc_map_cmd {
+	__u8				num_mapping_configs;
+	struct disc_map_config		mapping_configs
+					[NCI_MAX_NUM_MAPPING_CONFIGS];
+} __packed;
+
+#define NCI_OP_RF_DISCOVER_CMD		nci_opcode_pack(NCI_GID_RF_MGMT, 0x03)
+struct disc_config {
+	__u8	rf_tech_and_mode;
+	__u8	frequency;
+} __packed;
+
+struct nci_rf_disc_cmd {
+	__u8				num_disc_configs;
+	struct disc_config		disc_configs[NCI_MAX_NUM_RF_CONFIGS];
+} __packed;
+
+#define NCI_OP_RF_DISCOVER_SELECT_CMD	nci_opcode_pack(NCI_GID_RF_MGMT, 0x04)
+struct nci_rf_discover_select_cmd {
+	__u8	rf_discovery_id;
+	__u8	rf_protocol;
+	__u8	rf_interface;
+} __packed;
+
+#define NCI_OP_RF_DEACTIVATE_CMD	nci_opcode_pack(NCI_GID_RF_MGMT, 0x06)
+struct nci_rf_deactivate_cmd {
+	__u8	type;
+} __packed;
+
+/* ----------------------- */
+/* ---- NCI Responses ---- */
+/* ----------------------- */
+#define NCI_OP_CORE_RESET_RSP		nci_opcode_pack(NCI_GID_CORE, 0x00)
+struct nci_core_reset_rsp {
+	__u8	status;
+	__u8	nci_ver;
+	__u8	config_status;
+} __packed;
+
+#define NCI_OP_CORE_INIT_RSP		nci_opcode_pack(NCI_GID_CORE, 0x01)
+struct nci_core_init_rsp_1 {
+	__u8	status;
+	__le32	nfcc_features;
+	__u8	num_supported_rf_interfaces;
+	__u8	supported_rf_interfaces[0];	/* variable size array */
+	/* continuted in nci_core_init_rsp_2 */
+} __packed;
+
+struct nci_core_init_rsp_2 {
+	__u8	max_logical_connections;
+	__le16	max_routing_table_size;
+	__u8	max_ctrl_pkt_payload_len;
+	__le16	max_size_for_large_params;
+	__u8	manufact_id;
+	__le32	manufact_specific_info;
+} __packed;
+
+#define NCI_OP_RF_DISCOVER_MAP_RSP	nci_opcode_pack(NCI_GID_RF_MGMT, 0x00)
+
+#define NCI_OP_RF_DISCOVER_RSP		nci_opcode_pack(NCI_GID_RF_MGMT, 0x03)
+
+#define NCI_OP_RF_DISCOVER_SELECT_RSP	nci_opcode_pack(NCI_GID_RF_MGMT, 0x04)
+
+#define NCI_OP_RF_DEACTIVATE_RSP	nci_opcode_pack(NCI_GID_RF_MGMT, 0x06)
+
+/* --------------------------- */
+/* ---- NCI Notifications ---- */
+/* --------------------------- */
+#define NCI_OP_CORE_CONN_CREDITS_NTF	nci_opcode_pack(NCI_GID_CORE, 0x06)
+struct conn_credit_entry {
+	__u8	conn_id;
+	__u8	credits;
+} __packed;
+
+struct nci_core_conn_credit_ntf {
+	__u8				num_entries;
+	struct conn_credit_entry	conn_entries[NCI_MAX_NUM_CONN];
+} __packed;
+
+#define NCI_OP_CORE_GENERIC_ERROR_NTF	nci_opcode_pack(NCI_GID_CORE, 0x07)
+
+#define NCI_OP_CORE_INTF_ERROR_NTF	nci_opcode_pack(NCI_GID_CORE, 0x08)
+struct nci_core_intf_error_ntf {
+	__u8	status;
+	__u8	conn_id;
+} __packed;
+
+#define NCI_OP_RF_DISCOVER_NTF		nci_opcode_pack(NCI_GID_RF_MGMT, 0x03)
+struct rf_tech_specific_params_nfca_poll {
+	__u16	sens_res;
+	__u8	nfcid1_len;	/* 0, 4, 7, or 10 Bytes */
+	__u8	nfcid1[10];
+	__u8	sel_res_len;	/* 0 or 1 Bytes */
+	__u8	sel_res;
+} __packed;
+
+struct rf_tech_specific_params_nfcb_poll {
+	__u8	sensb_res_len;
+	__u8	sensb_res[12];	/* 11 or 12 Bytes */
+} __packed;
+
+struct rf_tech_specific_params_nfcf_poll {
+	__u8	bit_rate;
+	__u8	sensf_res_len;
+	__u8	sensf_res[18];	/* 16 or 18 Bytes */
+} __packed;
+
+struct nci_rf_discover_ntf {
+	__u8	rf_discovery_id;
+	__u8	rf_protocol;
+	__u8	rf_tech_and_mode;
+	__u8	rf_tech_specific_params_len;
+
+	union {
+		struct rf_tech_specific_params_nfca_poll nfca_poll;
+		struct rf_tech_specific_params_nfcb_poll nfcb_poll;
+		struct rf_tech_specific_params_nfcf_poll nfcf_poll;
+	} rf_tech_specific_params;
+
+	__u8	ntf_type;
+} __packed;
+
+#define NCI_OP_RF_INTF_ACTIVATED_NTF	nci_opcode_pack(NCI_GID_RF_MGMT, 0x05)
+struct activation_params_nfca_poll_iso_dep {
+	__u8	rats_res_len;
+	__u8	rats_res[20];
+};
+
+struct activation_params_nfcb_poll_iso_dep {
+	__u8	attrib_res_len;
+	__u8	attrib_res[50];
+};
+
+struct nci_rf_intf_activated_ntf {
+	__u8	rf_discovery_id;
+	__u8	rf_interface;
+	__u8	rf_protocol;
+	__u8	activation_rf_tech_and_mode;
+	__u8	max_data_pkt_payload_size;
+	__u8	initial_num_credits;
+	__u8	rf_tech_specific_params_len;
+
+	union {
+		struct rf_tech_specific_params_nfca_poll nfca_poll;
+		struct rf_tech_specific_params_nfcb_poll nfcb_poll;
+		struct rf_tech_specific_params_nfcf_poll nfcf_poll;
+	} rf_tech_specific_params;
+
+	__u8	data_exch_rf_tech_and_mode;
+	__u8	data_exch_tx_bit_rate;
+	__u8	data_exch_rx_bit_rate;
+	__u8	activation_params_len;
+
+	union {
+		struct activation_params_nfca_poll_iso_dep nfca_poll_iso_dep;
+		struct activation_params_nfcb_poll_iso_dep nfcb_poll_iso_dep;
+	} activation_params;
+
+} __packed;
+
+#define NCI_OP_RF_DEACTIVATE_NTF	nci_opcode_pack(NCI_GID_RF_MGMT, 0x06)
+struct nci_rf_deactivate_ntf {
+	__u8	type;
+	__u8	reason;
+} __packed;
+
+#endif /* __NCI_H */
diff --git a/include/net/nfc/nci_core.h b/include/net/nfc/nci_core.h
new file mode 100644
index 00000000..feba7402
--- /dev/null
+++ b/include/net/nfc/nci_core.h
@@ -0,0 +1,199 @@
+/*
+ *  The NFC Controller Interface is the communication protocol between an
+ *  NFC Controller (NFCC) and a Device Host (DH).
+ *
+ *  Copyright (C) 2011 Texas Instruments, Inc.
+ *
+ *  Written by Ilan Elias <ilane@ti.com>
+ *
+ *  Acknowledgements:
+ *  This file is based on hci_core.h, which was written
+ *  by Maxim Krasnyansky.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2
+ *  as published by the Free Software Foundation
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef __NCI_CORE_H
+#define __NCI_CORE_H
+
+#include <linux/interrupt.h>
+#include <linux/skbuff.h>
+
+#include <net/nfc/nfc.h>
+#include <net/nfc/nci.h>
+
+/* NCI device flags */
+enum nci_flag {
+	NCI_INIT,
+	NCI_UP,
+	NCI_DATA_EXCHANGE,
+	NCI_DATA_EXCHANGE_TO,
+};
+
+/* NCI device states */
+enum nci_state {
+	NCI_IDLE,
+	NCI_DISCOVERY,
+	NCI_W4_ALL_DISCOVERIES,
+	NCI_W4_HOST_SELECT,
+	NCI_POLL_ACTIVE,
+};
+
+/* NCI timeouts */
+#define NCI_RESET_TIMEOUT			5000
+#define NCI_INIT_TIMEOUT			5000
+#define NCI_RF_DISC_TIMEOUT			5000
+#define NCI_RF_DISC_SELECT_TIMEOUT		5000
+#define NCI_RF_DEACTIVATE_TIMEOUT		30000
+#define NCI_CMD_TIMEOUT				5000
+#define NCI_DATA_TIMEOUT			700
+
+struct nci_dev;
+
+struct nci_ops {
+	int (*open)(struct nci_dev *ndev);
+	int (*close)(struct nci_dev *ndev);
+	int (*send)(struct sk_buff *skb);
+};
+
+#define NCI_MAX_SUPPORTED_RF_INTERFACES		4
+#define NCI_MAX_DISCOVERED_TARGETS		10
+
+/* NCI Core structures */
+struct nci_dev {
+	struct nfc_dev		*nfc_dev;
+	struct nci_ops		*ops;
+
+	int			tx_headroom;
+	int			tx_tailroom;
+
+	atomic_t		state;
+	unsigned long		flags;
+
+	atomic_t		cmd_cnt;
+	atomic_t		credits_cnt;
+
+	struct timer_list	cmd_timer;
+	struct timer_list	data_timer;
+
+	struct workqueue_struct	*cmd_wq;
+	struct work_struct	cmd_work;
+
+	struct workqueue_struct	*rx_wq;
+	struct work_struct	rx_work;
+
+	struct workqueue_struct	*tx_wq;
+	struct work_struct	tx_work;
+
+	struct sk_buff_head	cmd_q;
+	struct sk_buff_head	rx_q;
+	struct sk_buff_head	tx_q;
+
+	struct mutex		req_lock;
+	struct completion	req_completion;
+	__u32			req_status;
+	__u32			req_result;
+
+	void			*driver_data;
+
+	__u32			poll_prots;
+	__u32			target_active_prot;
+
+	struct nfc_target	targets[NCI_MAX_DISCOVERED_TARGETS];
+	int			n_targets;
+
+	/* received during NCI_OP_CORE_RESET_RSP */
+	__u8			nci_ver;
+
+	/* received during NCI_OP_CORE_INIT_RSP */
+	__u32			nfcc_features;
+	__u8			num_supported_rf_interfaces;
+	__u8			supported_rf_interfaces
+				[NCI_MAX_SUPPORTED_RF_INTERFACES];
+	__u8			max_logical_connections;
+	__u16			max_routing_table_size;
+	__u8			max_ctrl_pkt_payload_len;
+	__u16			max_size_for_large_params;
+	__u8			manufact_id;
+	__u32			manufact_specific_info;
+
+	/* received during NCI_OP_RF_INTF_ACTIVATED_NTF */
+	__u8			max_data_pkt_payload_size;
+	__u8			initial_num_credits;
+
+	/* stored during nci_data_exchange */
+	data_exchange_cb_t	data_exchange_cb;
+	void			*data_exchange_cb_context;
+	struct sk_buff		*rx_data_reassembly;
+};
+
+/* ----- NCI Devices ----- */
+struct nci_dev *nci_allocate_device(struct nci_ops *ops,
+				    __u32 supported_protocols,
+				    int tx_headroom,
+				    int tx_tailroom);
+void nci_free_device(struct nci_dev *ndev);
+int nci_register_device(struct nci_dev *ndev);
+void nci_unregister_device(struct nci_dev *ndev);
+int nci_recv_frame(struct sk_buff *skb);
+
+static inline struct sk_buff *nci_skb_alloc(struct nci_dev *ndev,
+					    unsigned int len,
+					    gfp_t how)
+{
+	struct sk_buff *skb;
+
+	skb = alloc_skb(len + ndev->tx_headroom + ndev->tx_tailroom, how);
+	if (skb)
+		skb_reserve(skb, ndev->tx_headroom);
+
+	return skb;
+}
+
+static inline void nci_set_parent_dev(struct nci_dev *ndev, struct device *dev)
+{
+	nfc_set_parent_dev(ndev->nfc_dev, dev);
+}
+
+static inline void nci_set_drvdata(struct nci_dev *ndev, void *data)
+{
+	ndev->driver_data = data;
+}
+
+static inline void *nci_get_drvdata(struct nci_dev *ndev)
+{
+	return ndev->driver_data;
+}
+
+void nci_rsp_packet(struct nci_dev *ndev, struct sk_buff *skb);
+void nci_ntf_packet(struct nci_dev *ndev, struct sk_buff *skb);
+void nci_rx_data_packet(struct nci_dev *ndev, struct sk_buff *skb);
+int nci_send_cmd(struct nci_dev *ndev, __u16 opcode, __u8 plen, void *payload);
+int nci_send_data(struct nci_dev *ndev, __u8 conn_id, struct sk_buff *skb);
+void nci_data_exchange_complete(struct nci_dev *ndev, struct sk_buff *skb,
+				int err);
+void nci_clear_target_list(struct nci_dev *ndev);
+
+/* ----- NCI requests ----- */
+#define NCI_REQ_DONE		0
+#define NCI_REQ_PEND		1
+#define NCI_REQ_CANCELED	2
+
+void nci_req_complete(struct nci_dev *ndev, int result);
+
+/* ----- NCI status code ----- */
+int nci_to_errno(__u8 code);
+
+#endif /* __NCI_CORE_H */
diff --git a/include/net/nfc/nfc.h b/include/net/nfc/nfc.h
new file mode 100644
index 00000000..bac070bf
--- /dev/null
+++ b/include/net/nfc/nfc.h
@@ -0,0 +1,188 @@
+/*
+ * Copyright (C) 2011 Instituto Nokia de Tecnologia
+ *
+ * Authors:
+ *    Lauro Ramos Venancio <lauro.venancio@openbossa.org>
+ *    Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __NET_NFC_H
+#define __NET_NFC_H
+
+#include <linux/nfc.h>
+#include <linux/device.h>
+#include <linux/skbuff.h>
+
+#define nfc_dev_info(dev, fmt, arg...) dev_info((dev), "NFC: " fmt "\n", ## arg)
+#define nfc_dev_err(dev, fmt, arg...) dev_err((dev), "NFC: " fmt "\n", ## arg)
+#define nfc_dev_dbg(dev, fmt, arg...) dev_dbg((dev), fmt "\n", ## arg)
+
+struct nfc_dev;
+
+/**
+ * data_exchange_cb_t - Definition of nfc_data_exchange callback
+ *
+ * @context: nfc_data_exchange cb_context parameter
+ * @skb: response data
+ * @err: If an error has occurred during data exchange, it is the
+ *	error number. Zero means no error.
+ *
+ * When a rx or tx package is lost or corrupted or the target gets out
+ * of the operating field, err is -EIO.
+ */
+typedef void (*data_exchange_cb_t)(void *context, struct sk_buff *skb,
+								int err);
+
+struct nfc_ops {
+	int (*dev_up)(struct nfc_dev *dev);
+	int (*dev_down)(struct nfc_dev *dev);
+	int (*start_poll)(struct nfc_dev *dev, u32 protocols);
+	void (*stop_poll)(struct nfc_dev *dev);
+	int (*dep_link_up)(struct nfc_dev *dev, int target_idx, u8 comm_mode,
+			   u8 *gb, size_t gb_len);
+	int (*dep_link_down)(struct nfc_dev *dev);
+	int (*activate_target)(struct nfc_dev *dev, u32 target_idx,
+			       u32 protocol);
+	void (*deactivate_target)(struct nfc_dev *dev, u32 target_idx);
+	int (*data_exchange)(struct nfc_dev *dev, u32 target_idx,
+			     struct sk_buff *skb, data_exchange_cb_t cb,
+			     void *cb_context);
+};
+
+#define NFC_TARGET_IDX_ANY -1
+#define NFC_MAX_GT_LEN 48
+
+struct nfc_target {
+	u32 idx;
+	u32 supported_protocols;
+	u16 sens_res;
+	u8 sel_res;
+	u8 nfcid1_len;
+	u8 nfcid1[NFC_NFCID1_MAXSIZE];
+	u8 sensb_res_len;
+	u8 sensb_res[NFC_SENSB_RES_MAXSIZE];
+	u8 sensf_res_len;
+	u8 sensf_res[NFC_SENSF_RES_MAXSIZE];
+};
+
+struct nfc_genl_data {
+	u32 poll_req_pid;
+	struct mutex genl_data_mutex;
+};
+
+struct nfc_dev {
+	unsigned idx;
+	struct nfc_target *targets;
+	int n_targets;
+	int targets_generation;
+	spinlock_t targets_lock;
+	struct device dev;
+	bool dev_up;
+	bool polling;
+	bool remote_activated;
+	bool dep_link_up;
+	u32 dep_rf_mode;
+	struct nfc_genl_data genl_data;
+	u32 supported_protocols;
+
+	int tx_headroom;
+	int tx_tailroom;
+
+	struct nfc_ops *ops;
+};
+#define to_nfc_dev(_dev) container_of(_dev, struct nfc_dev, dev)
+
+extern struct class nfc_class;
+
+struct nfc_dev *nfc_allocate_device(struct nfc_ops *ops,
+				    u32 supported_protocols,
+				    int tx_headroom,
+				    int tx_tailroom);
+
+/**
+ * nfc_free_device - free nfc device
+ *
+ * @dev: The nfc device to free
+ */
+static inline void nfc_free_device(struct nfc_dev *dev)
+{
+	put_device(&dev->dev);
+}
+
+int nfc_register_device(struct nfc_dev *dev);
+
+void nfc_unregister_device(struct nfc_dev *dev);
+
+/**
+ * nfc_set_parent_dev - set the parent device
+ *
+ * @nfc_dev: The nfc device whose parent is being set
+ * @dev: The parent device
+ */
+static inline void nfc_set_parent_dev(struct nfc_dev *nfc_dev,
+				      struct device *dev)
+{
+	nfc_dev->dev.parent = dev;
+}
+
+/**
+ * nfc_set_drvdata - set driver specifc data
+ *
+ * @dev: The nfc device
+ * @data: Pointer to driver specifc data
+ */
+static inline void nfc_set_drvdata(struct nfc_dev *dev, void *data)
+{
+	dev_set_drvdata(&dev->dev, data);
+}
+
+/**
+ * nfc_get_drvdata - get driver specifc data
+ *
+ * @dev: The nfc device
+ */
+static inline void *nfc_get_drvdata(struct nfc_dev *dev)
+{
+	return dev_get_drvdata(&dev->dev);
+}
+
+/**
+ * nfc_device_name - get the nfc device name
+ *
+ * @dev: The nfc device whose name to return
+ */
+static inline const char *nfc_device_name(struct nfc_dev *dev)
+{
+	return dev_name(&dev->dev);
+}
+
+struct sk_buff *nfc_alloc_send_skb(struct nfc_dev *dev, struct sock *sk,
+				   unsigned int flags, unsigned int size,
+				   unsigned int *err);
+struct sk_buff *nfc_alloc_recv_skb(unsigned int size, gfp_t gfp);
+
+int nfc_set_remote_general_bytes(struct nfc_dev *dev,
+				 u8 *gt, u8 gt_len);
+
+int nfc_targets_found(struct nfc_dev *dev,
+		      struct nfc_target *targets, int ntargets);
+
+int nfc_dep_link_is_up(struct nfc_dev *dev, u32 target_idx,
+		       u8 comm_mode, u8 rf_mode);
+
+#endif /* __NET_NFC_H */
diff --git a/include/net/nl802154.h b/include/net/nl802154.h
new file mode 100644
index 00000000..99d2ba1c
--- /dev/null
+++ b/include/net/nl802154.h
@@ -0,0 +1,126 @@
+/*
+ * nl802154.h
+ *
+ * Copyright (C) 2007, 2008, 2009 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef IEEE802154_NL_H
+#define IEEE802154_NL_H
+
+struct net_device;
+struct ieee802154_addr;
+
+/**
+ * ieee802154_nl_assoc_indic - Notify userland of an association request.
+ * @dev: The network device on which this association request was
+ *       received.
+ * @addr: The address of the device requesting association.
+ * @cap: The capability information field from the device.
+ *
+ * This informs a userland coordinator of a device requesting to
+ * associate with the PAN controlled by the coordinator.
+ *
+ * Note: This is in section 7.3.1 of the IEEE 802.15.4-2006 document.
+ */
+int ieee802154_nl_assoc_indic(struct net_device *dev,
+		struct ieee802154_addr *addr, u8 cap);
+
+/**
+ * ieee802154_nl_assoc_confirm - Notify userland of association.
+ * @dev: The device which has completed association.
+ * @short_addr: The short address assigned to the device.
+ * @status: The status of the association.
+ *
+ * Inform userland of the result of an association request. If the
+ * association request included asking the coordinator to allocate
+ * a short address then it is returned in @short_addr.
+ *
+ * Note: This is in section 7.3.2 of the IEEE 802.15.4 document.
+ */
+int ieee802154_nl_assoc_confirm(struct net_device *dev,
+		u16 short_addr, u8 status);
+
+/**
+ * ieee802154_nl_disassoc_indic - Notify userland of disassociation.
+ * @dev: The device on which disassociation was indicated.
+ * @addr: The device which is disassociating.
+ * @reason: The reason for the disassociation.
+ *
+ * Inform userland that a device has disassociated from the network.
+ *
+ * Note: This is in section 7.3.3 of the IEEE 802.15.4 document.
+ */
+int ieee802154_nl_disassoc_indic(struct net_device *dev,
+		struct ieee802154_addr *addr, u8 reason);
+
+/**
+ * ieee802154_nl_disassoc_confirm - Notify userland of disassociation
+ * completion.
+ * @dev: The device on which disassociation was ordered.
+ * @status: The result of the disassociation.
+ *
+ * Inform userland of the result of requesting that a device
+ * disassociate, or the result of requesting that we disassociate from
+ * a PAN managed by another coordinator.
+ *
+ * Note: This is in section 7.1.4.3 of the IEEE 802.15.4 document.
+ */
+int ieee802154_nl_disassoc_confirm(struct net_device *dev,
+		u8 status);
+
+/**
+ * ieee802154_nl_scan_confirm - Notify userland of completion of scan.
+ * @dev: The device which was instructed to scan.
+ * @status: The status of the scan operation.
+ * @scan_type: What type of scan was performed.
+ * @unscanned: Any channels that the device was unable to scan.
+ * @edl: The energy levels (if a passive scan).
+ *
+ *
+ * Note: This is in section 7.1.11 of the IEEE 802.15.4 document.
+ * Note: This API does not permit the return of an active scan result.
+ */
+int ieee802154_nl_scan_confirm(struct net_device *dev,
+		u8 status, u8 scan_type, u32 unscanned, u8 page,
+		u8 *edl/*, struct list_head *pan_desc_list */);
+
+/**
+ * ieee802154_nl_beacon_indic - Notify userland of a received beacon.
+ * @dev: The device on which a beacon was received.
+ * @panid: The PAN of the coordinator.
+ * @coord_addr: The short address of the coordinator on that PAN.
+ *
+ * Note: This is in section 7.1.5 of the IEEE 802.15.4 document.
+ * Note: This API does not provide extended information such as what
+ * channel the PAN is on or what the LQI of the beacon frame was on
+ * receipt.
+ * Note: This API cannot indicate a beacon frame for a coordinator
+ *       operating in long addressing mode.
+ */
+int ieee802154_nl_beacon_indic(struct net_device *dev, u16 panid,
+		u16 coord_addr);
+
+/**
+ * ieee802154_nl_start_confirm - Notify userland of completion of start.
+ * @dev: The device which was instructed to scan.
+ * @status: The status of the scan operation.
+ *
+ * Note: This is in section 7.1.14 of the IEEE 802.15.4 document.
+ */
+int ieee802154_nl_start_confirm(struct net_device *dev, u8 status);
+
+#endif
diff --git a/include/net/p8022.h b/include/net/p8022.h
new file mode 100644
index 00000000..42e9fac5
--- /dev/null
+++ b/include/net/p8022.h
@@ -0,0 +1,13 @@
+#ifndef _NET_P8022_H
+#define _NET_P8022_H
+extern struct datalink_proto *
+	register_8022_client(unsigned char type,
+			     int (*func)(struct sk_buff *skb,
+					 struct net_device *dev,
+					 struct packet_type *pt,
+					 struct net_device *orig_dev));
+extern void unregister_8022_client(struct datalink_proto *proto);
+
+extern struct datalink_proto *make_8023_client(void);
+extern void destroy_8023_client(struct datalink_proto *dl);
+#endif
diff --git a/include/net/phonet/gprs.h b/include/net/phonet/gprs.h
new file mode 100644
index 00000000..928daf59
--- /dev/null
+++ b/include/net/phonet/gprs.h
@@ -0,0 +1,38 @@
+/*
+ * File: pep_gprs.h
+ *
+ * GPRS over Phonet pipe end point socket
+ *
+ * Copyright (C) 2008 Nokia Corporation.
+ *
+ * Author: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef NET_PHONET_GPRS_H
+#define NET_PHONET_GPRS_H
+
+struct sock;
+struct sk_buff;
+
+int pep_writeable(struct sock *sk);
+int pep_write(struct sock *sk, struct sk_buff *skb);
+struct sk_buff *pep_read(struct sock *sk);
+
+int gprs_attach(struct sock *sk);
+void gprs_detach(struct sock *sk);
+
+#endif
diff --git a/include/net/phonet/pep.h b/include/net/phonet/pep.h
new file mode 100644
index 00000000..b669fe6d
--- /dev/null
+++ b/include/net/phonet/pep.h
@@ -0,0 +1,168 @@
+/*
+ * File: pep.h
+ *
+ * Phonet Pipe End Point sockets definitions
+ *
+ * Copyright (C) 2008 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef NET_PHONET_PEP_H
+#define NET_PHONET_PEP_H
+
+struct pep_sock {
+	struct pn_sock		pn_sk;
+
+	/* XXX: union-ify listening vs connected stuff ? */
+	/* Listening socket stuff: */
+	struct hlist_head	hlist;
+
+	/* Connected socket stuff: */
+	struct sock		*listener;
+	struct sk_buff_head	ctrlreq_queue;
+#define PNPIPE_CTRLREQ_MAX	10
+	atomic_t		tx_credits;
+	int			ifindex;
+	u16			peer_type;	/* peer type/subtype */
+	u8			pipe_handle;
+
+	u8			rx_credits;
+	u8			rx_fc;	/* RX flow control */
+	u8			tx_fc;	/* TX flow control */
+	u8			init_enable;	/* auto-enable at creation */
+	u8			aligned;
+};
+
+static inline struct pep_sock *pep_sk(struct sock *sk)
+{
+	return (struct pep_sock *)sk;
+}
+
+extern const struct proto_ops phonet_stream_ops;
+
+/* Pipe protocol definitions */
+struct pnpipehdr {
+	u8			utid; /* transaction ID */
+	u8			message_id;
+	u8			pipe_handle;
+	union {
+		u8		state_after_connect;	/* connect request */
+		u8		state_after_reset;	/* reset request */
+		u8		error_code;		/* any response */
+		u8		pep_type;		/* status indication */
+		u8		data[1];
+	};
+};
+#define other_pep_type		data[1]
+
+static inline struct pnpipehdr *pnp_hdr(struct sk_buff *skb)
+{
+	return (struct pnpipehdr *)skb_transport_header(skb);
+}
+
+#define MAX_PNPIPE_HEADER (MAX_PHONET_HEADER + 4)
+
+enum {
+	PNS_PIPE_CREATE_REQ = 0x00,
+	PNS_PIPE_CREATE_RESP,
+	PNS_PIPE_REMOVE_REQ,
+	PNS_PIPE_REMOVE_RESP,
+
+	PNS_PIPE_DATA = 0x20,
+	PNS_PIPE_ALIGNED_DATA,
+
+	PNS_PEP_CONNECT_REQ = 0x40,
+	PNS_PEP_CONNECT_RESP,
+	PNS_PEP_DISCONNECT_REQ,
+	PNS_PEP_DISCONNECT_RESP,
+	PNS_PEP_RESET_REQ,
+	PNS_PEP_RESET_RESP,
+	PNS_PEP_ENABLE_REQ,
+	PNS_PEP_ENABLE_RESP,
+	PNS_PEP_CTRL_REQ,
+	PNS_PEP_CTRL_RESP,
+	PNS_PEP_DISABLE_REQ = 0x4C,
+	PNS_PEP_DISABLE_RESP,
+
+	PNS_PEP_STATUS_IND = 0x60,
+	PNS_PIPE_CREATED_IND,
+	PNS_PIPE_RESET_IND = 0x63,
+	PNS_PIPE_ENABLED_IND,
+	PNS_PIPE_REDIRECTED_IND,
+	PNS_PIPE_DISABLED_IND = 0x66,
+};
+
+#define PN_PIPE_INVALID_HANDLE	0xff
+#define PN_PEP_TYPE_COMMON	0x00
+
+/* Phonet pipe status indication */
+enum {
+	PN_PEP_IND_FLOW_CONTROL,
+	PN_PEP_IND_ID_MCFC_GRANT_CREDITS,
+};
+
+/* Phonet pipe error codes */
+enum {
+	PN_PIPE_NO_ERROR,
+	PN_PIPE_ERR_INVALID_PARAM,
+	PN_PIPE_ERR_INVALID_HANDLE,
+	PN_PIPE_ERR_INVALID_CTRL_ID,
+	PN_PIPE_ERR_NOT_ALLOWED,
+	PN_PIPE_ERR_PEP_IN_USE,
+	PN_PIPE_ERR_OVERLOAD,
+	PN_PIPE_ERR_DEV_DISCONNECTED,
+	PN_PIPE_ERR_TIMEOUT,
+	PN_PIPE_ERR_ALL_PIPES_IN_USE,
+	PN_PIPE_ERR_GENERAL,
+	PN_PIPE_ERR_NOT_SUPPORTED,
+};
+
+/* Phonet pipe states */
+enum {
+	PN_PIPE_DISABLE,
+	PN_PIPE_ENABLE,
+};
+
+/* Phonet pipe sub-block types */
+enum {
+	PN_PIPE_SB_CREATE_REQ_PEP_SUB_TYPE,
+	PN_PIPE_SB_CONNECT_REQ_PEP_SUB_TYPE,
+	PN_PIPE_SB_REDIRECT_REQ_PEP_SUB_TYPE,
+	PN_PIPE_SB_NEGOTIATED_FC,
+	PN_PIPE_SB_REQUIRED_FC_TX,
+	PN_PIPE_SB_PREFERRED_FC_RX,
+	PN_PIPE_SB_ALIGNED_DATA,
+};
+
+/* Phonet pipe flow control models */
+enum {
+	PN_NO_FLOW_CONTROL,
+	PN_LEGACY_FLOW_CONTROL,
+	PN_ONE_CREDIT_FLOW_CONTROL,
+	PN_MULTI_CREDIT_FLOW_CONTROL,
+	PN_MAX_FLOW_CONTROL,
+};
+
+#define pn_flow_safe(fc) ((fc) >> 1)
+
+/* Phonet pipe flow control states */
+enum {
+	PEP_IND_EMPTY,
+	PEP_IND_BUSY,
+	PEP_IND_READY,
+};
+
+#endif
diff --git a/include/net/phonet/phonet.h b/include/net/phonet/phonet.h
new file mode 100644
index 00000000..68e50975
--- /dev/null
+++ b/include/net/phonet/phonet.h
@@ -0,0 +1,119 @@
+/*
+ * File: af_phonet.h
+ *
+ * Phonet sockets kernel definitions
+ *
+ * Copyright (C) 2008 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef AF_PHONET_H
+#define AF_PHONET_H
+
+/*
+ * The lower layers may not require more space, ever. Make sure it's
+ * enough.
+ */
+#define MAX_PHONET_HEADER	(8 + MAX_HEADER)
+
+/*
+ * Every Phonet* socket has this structure first in its
+ * protocol-specific structure under name c.
+ */
+struct pn_sock {
+	struct sock	sk;
+	u16		sobject;
+	u16		dobject;
+	u8		resource;
+};
+
+static inline struct pn_sock *pn_sk(struct sock *sk)
+{
+	return (struct pn_sock *)sk;
+}
+
+extern const struct proto_ops phonet_dgram_ops;
+
+void pn_sock_init(void);
+struct sock *pn_find_sock_by_sa(struct net *net, const struct sockaddr_pn *sa);
+void pn_deliver_sock_broadcast(struct net *net, struct sk_buff *skb);
+void phonet_get_local_port_range(int *min, int *max);
+void pn_sock_hash(struct sock *sk);
+void pn_sock_unhash(struct sock *sk);
+int pn_sock_get_port(struct sock *sk, unsigned short sport);
+
+struct sock *pn_find_sock_by_res(struct net *net, u8 res);
+int pn_sock_bind_res(struct sock *sock, u8 res);
+int pn_sock_unbind_res(struct sock *sk, u8 res);
+void pn_sock_unbind_all_res(struct sock *sk);
+
+int pn_skb_send(struct sock *sk, struct sk_buff *skb,
+		const struct sockaddr_pn *target);
+
+static inline struct phonethdr *pn_hdr(struct sk_buff *skb)
+{
+	return (struct phonethdr *)skb_network_header(skb);
+}
+
+static inline struct phonetmsg *pn_msg(struct sk_buff *skb)
+{
+	return (struct phonetmsg *)skb_transport_header(skb);
+}
+
+/*
+ * Get the other party's sockaddr from received skb. The skb begins
+ * with a Phonet header.
+ */
+static inline
+void pn_skb_get_src_sockaddr(struct sk_buff *skb, struct sockaddr_pn *sa)
+{
+	struct phonethdr *ph = pn_hdr(skb);
+	u16 obj = pn_object(ph->pn_sdev, ph->pn_sobj);
+
+	sa->spn_family = AF_PHONET;
+	pn_sockaddr_set_object(sa, obj);
+	pn_sockaddr_set_resource(sa, ph->pn_res);
+	memset(sa->spn_zero, 0, sizeof(sa->spn_zero));
+}
+
+static inline
+void pn_skb_get_dst_sockaddr(struct sk_buff *skb, struct sockaddr_pn *sa)
+{
+	struct phonethdr *ph = pn_hdr(skb);
+	u16 obj = pn_object(ph->pn_rdev, ph->pn_robj);
+
+	sa->spn_family = AF_PHONET;
+	pn_sockaddr_set_object(sa, obj);
+	pn_sockaddr_set_resource(sa, ph->pn_res);
+	memset(sa->spn_zero, 0, sizeof(sa->spn_zero));
+}
+
+/* Protocols in Phonet protocol family. */
+struct phonet_protocol {
+	const struct proto_ops	*ops;
+	struct proto		*prot;
+	int			sock_type;
+};
+
+int phonet_proto_register(unsigned int protocol, struct phonet_protocol *pp);
+void phonet_proto_unregister(unsigned int protocol, struct phonet_protocol *pp);
+
+int phonet_sysctl_init(void);
+void phonet_sysctl_exit(void);
+int isi_register(void);
+void isi_unregister(void);
+
+#endif
diff --git a/include/net/phonet/pn_dev.h b/include/net/phonet/pn_dev.h
new file mode 100644
index 00000000..8639de57
--- /dev/null
+++ b/include/net/phonet/pn_dev.h
@@ -0,0 +1,62 @@
+/*
+ * File: pn_dev.h
+ *
+ * Phonet network device
+ *
+ * Copyright (C) 2008 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef PN_DEV_H
+#define PN_DEV_H
+
+struct phonet_device_list {
+	struct list_head list;
+	struct mutex lock;
+};
+
+struct phonet_device_list *phonet_device_list(struct net *net);
+
+struct phonet_device {
+	struct list_head list;
+	struct net_device *netdev;
+	DECLARE_BITMAP(addrs, 64);
+	struct rcu_head	rcu;
+};
+
+int phonet_device_init(void);
+void phonet_device_exit(void);
+int phonet_netlink_register(void);
+struct net_device *phonet_device_get(struct net *net);
+
+int phonet_address_add(struct net_device *dev, u8 addr);
+int phonet_address_del(struct net_device *dev, u8 addr);
+u8 phonet_address_get(struct net_device *dev, u8 addr);
+int phonet_address_lookup(struct net *net, u8 addr);
+void phonet_address_notify(int event, struct net_device *dev, u8 addr);
+
+int phonet_route_add(struct net_device *dev, u8 daddr);
+int phonet_route_del(struct net_device *dev, u8 daddr);
+void rtm_phonet_notify(int event, struct net_device *dev, u8 dst);
+struct net_device *phonet_route_get_rcu(struct net *net, u8 daddr);
+struct net_device *phonet_route_output(struct net *net, u8 daddr);
+
+#define PN_NO_ADDR	0xff
+
+extern const struct file_operations pn_sock_seq_fops;
+extern const struct file_operations pn_res_seq_fops;
+
+#endif
diff --git a/include/net/ping.h b/include/net/ping.h
new file mode 100644
index 00000000..b1717ae9
--- /dev/null
+++ b/include/net/ping.h
@@ -0,0 +1,99 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the "ping" module.
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _PING_H
+#define _PING_H
+
+#include <net/icmp.h>
+#include <net/netns/hash.h>
+
+/* PING_HTABLE_SIZE must be power of 2 */
+#define PING_HTABLE_SIZE 	64
+#define PING_HTABLE_MASK 	(PING_HTABLE_SIZE-1)
+
+#define ping_portaddr_for_each_entry(__sk, node, list) \
+	hlist_nulls_for_each_entry(__sk, node, list, sk_nulls_node)
+
+/*
+ * gid_t is either uint or ushort.  We want to pass it to
+ * proc_dointvec_minmax(), so it must not be larger than MAX_INT
+ */
+#define GID_T_MAX (((gid_t)~0U) >> 1)
+
+/* Compatibility glue so we can support IPv6 when it's compiled as a module */
+struct pingv6_ops {
+	int (*ipv6_recv_error)(struct sock *sk, struct msghdr *msg, int len);
+	int (*datagram_recv_ctl)(struct sock *sk, struct msghdr *msg,
+				 struct sk_buff *skb);
+	int (*icmpv6_err_convert)(u8 type, u8 code, int *err);
+	void (*ipv6_icmp_error)(struct sock *sk, struct sk_buff *skb, int err,
+				__be16 port, u32 info, u8 *payload);
+	int (*ipv6_chk_addr)(struct net *net, const struct in6_addr *addr,
+			     struct net_device *dev, int strict);
+};
+
+struct ping_table {
+	struct hlist_nulls_head	hash[PING_HTABLE_SIZE];
+	rwlock_t		lock;
+};
+
+struct ping_iter_state {
+	struct seq_net_private  p;
+	int			bucket;
+};
+
+extern struct proto ping_prot;
+extern struct ping_table ping_table;
+#if IS_ENABLED(CONFIG_IPV6)
+extern struct pingv6_ops pingv6_ops;
+#endif
+
+struct pingfakehdr {
+	struct icmphdr icmph;
+	struct iovec *iov;
+	sa_family_t family;
+	__wsum wcheck;
+};
+
+int  ping_get_port(struct sock *sk, unsigned short ident);
+void ping_hash(struct sock *sk);
+void ping_unhash(struct sock *sk);
+
+int  ping_init_sock(struct sock *sk);
+void ping_close(struct sock *sk, long timeout);
+int  ping_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len);
+void ping_err(struct sk_buff *skb, int offset, u32 info);
+void ping_v4_err(struct sk_buff *skb, u32 info);
+int  ping_getfrag(void *from, char *to, int offset, int fraglen, int odd,
+		  struct sk_buff *);
+
+int  ping_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
+		  size_t len, int noblock, int flags, int *addr_len);
+int  ping_common_sendmsg(int family, struct msghdr *msg, size_t len,
+			 void *user_icmph, size_t icmph_len);
+int  ping_v4_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
+		     size_t len);
+int  ping_v6_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
+		     size_t len);
+int  ping_queue_rcv_skb(struct sock *sk, struct sk_buff *skb);
+void ping_rcv(struct sk_buff *skb);
+
+#ifdef CONFIG_PROC_FS
+extern int __init ping_proc_init(void);
+extern void ping_proc_exit(void);
+#endif
+
+void __init ping_init(void);
+int  __init pingv6_init(void);
+void pingv6_exit(void);
+
+#endif /* _PING_H */
diff --git a/include/net/pkt_cls.h b/include/net/pkt_cls.h
new file mode 100644
index 00000000..9fcc680a
--- /dev/null
+++ b/include/net/pkt_cls.h
@@ -0,0 +1,359 @@
+#ifndef __NET_PKT_CLS_H
+#define __NET_PKT_CLS_H
+
+#include <linux/pkt_cls.h>
+#include <net/sch_generic.h>
+#include <net/act_api.h>
+
+/* Basic packet classifier frontend definitions. */
+
+struct tcf_walker {
+	int	stop;
+	int	skip;
+	int	count;
+	int	(*fn)(struct tcf_proto *, unsigned long node, struct tcf_walker *);
+};
+
+extern int register_tcf_proto_ops(struct tcf_proto_ops *ops);
+extern int unregister_tcf_proto_ops(struct tcf_proto_ops *ops);
+
+static inline unsigned long
+__cls_set_class(unsigned long *clp, unsigned long cl)
+{
+	unsigned long old_cl;
+ 
+	old_cl = *clp;
+	*clp = cl;
+	return old_cl;
+}
+
+static inline unsigned long
+cls_set_class(struct tcf_proto *tp, unsigned long *clp, 
+	unsigned long cl)
+{
+	unsigned long old_cl;
+	
+	tcf_tree_lock(tp);
+	old_cl = __cls_set_class(clp, cl);
+	tcf_tree_unlock(tp);
+ 
+	return old_cl;
+}
+
+static inline void
+tcf_bind_filter(struct tcf_proto *tp, struct tcf_result *r, unsigned long base)
+{
+	unsigned long cl;
+
+	cl = tp->q->ops->cl_ops->bind_tcf(tp->q, base, r->classid);
+	cl = cls_set_class(tp, &r->class, cl);
+	if (cl)
+		tp->q->ops->cl_ops->unbind_tcf(tp->q, cl);
+}
+
+static inline void
+tcf_unbind_filter(struct tcf_proto *tp, struct tcf_result *r)
+{
+	unsigned long cl;
+
+	if ((cl = __cls_set_class(&r->class, 0)) != 0)
+		tp->q->ops->cl_ops->unbind_tcf(tp->q, cl);
+}
+
+struct tcf_exts {
+#ifdef CONFIG_NET_CLS_ACT
+	struct tc_action *action;
+#endif
+};
+
+/* Map to export classifier specific extension TLV types to the
+ * generic extensions API. Unsupported extensions must be set to 0.
+ */
+struct tcf_ext_map {
+	int action;
+	int police;
+};
+
+/**
+ * tcf_exts_is_predicative - check if a predicative extension is present
+ * @exts: tc filter extensions handle
+ *
+ * Returns 1 if a predicative extension is present, i.e. an extension which
+ * might cause further actions and thus overrule the regular tcf_result.
+ */
+static inline int
+tcf_exts_is_predicative(struct tcf_exts *exts)
+{
+#ifdef CONFIG_NET_CLS_ACT
+	return !!exts->action;
+#else
+	return 0;
+#endif
+}
+
+/**
+ * tcf_exts_is_available - check if at least one extension is present
+ * @exts: tc filter extensions handle
+ *
+ * Returns 1 if at least one extension is present.
+ */
+static inline int
+tcf_exts_is_available(struct tcf_exts *exts)
+{
+	/* All non-predicative extensions must be added here. */
+	return tcf_exts_is_predicative(exts);
+}
+
+/**
+ * tcf_exts_exec - execute tc filter extensions
+ * @skb: socket buffer
+ * @exts: tc filter extensions handle
+ * @res: desired result
+ *
+ * Executes all configured extensions. Returns 0 on a normal execution,
+ * a negative number if the filter must be considered unmatched or
+ * a positive action code (TC_ACT_*) which must be returned to the
+ * underlying layer.
+ */
+static inline int
+tcf_exts_exec(struct sk_buff *skb, struct tcf_exts *exts,
+	       struct tcf_result *res)
+{
+#ifdef CONFIG_NET_CLS_ACT
+	if (exts->action)
+		return tcf_action_exec(skb, exts->action, res);
+#endif
+	return 0;
+}
+
+extern int tcf_exts_validate(struct tcf_proto *tp, struct nlattr **tb,
+	                     struct nlattr *rate_tlv, struct tcf_exts *exts,
+	                     const struct tcf_ext_map *map);
+extern void tcf_exts_destroy(struct tcf_proto *tp, struct tcf_exts *exts);
+extern void tcf_exts_change(struct tcf_proto *tp, struct tcf_exts *dst,
+	                     struct tcf_exts *src);
+extern int tcf_exts_dump(struct sk_buff *skb, struct tcf_exts *exts,
+	                 const struct tcf_ext_map *map);
+extern int tcf_exts_dump_stats(struct sk_buff *skb, struct tcf_exts *exts,
+	                       const struct tcf_ext_map *map);
+
+/**
+ * struct tcf_pkt_info - packet information
+ */
+struct tcf_pkt_info {
+	unsigned char *		ptr;
+	int			nexthdr;
+};
+
+#ifdef CONFIG_NET_EMATCH
+
+struct tcf_ematch_ops;
+
+/**
+ * struct tcf_ematch - extended match (ematch)
+ * 
+ * @matchid: identifier to allow userspace to reidentify a match
+ * @flags: flags specifying attributes and the relation to other matches
+ * @ops: the operations lookup table of the corresponding ematch module
+ * @datalen: length of the ematch specific configuration data
+ * @data: ematch specific data
+ */
+struct tcf_ematch {
+	struct tcf_ematch_ops * ops;
+	unsigned long		data;
+	unsigned int		datalen;
+	u16			matchid;
+	u16			flags;
+};
+
+static inline int tcf_em_is_container(struct tcf_ematch *em)
+{
+	return !em->ops;
+}
+
+static inline int tcf_em_is_simple(struct tcf_ematch *em)
+{
+	return em->flags & TCF_EM_SIMPLE;
+}
+
+static inline int tcf_em_is_inverted(struct tcf_ematch *em)
+{
+	return em->flags & TCF_EM_INVERT;
+}
+
+static inline int tcf_em_last_match(struct tcf_ematch *em)
+{
+	return (em->flags & TCF_EM_REL_MASK) == TCF_EM_REL_END;
+}
+
+static inline int tcf_em_early_end(struct tcf_ematch *em, int result)
+{
+	if (tcf_em_last_match(em))
+		return 1;
+
+	if (result == 0 && em->flags & TCF_EM_REL_AND)
+		return 1;
+
+	if (result != 0 && em->flags & TCF_EM_REL_OR)
+		return 1;
+
+	return 0;
+}
+	
+/**
+ * struct tcf_ematch_tree - ematch tree handle
+ *
+ * @hdr: ematch tree header supplied by userspace
+ * @matches: array of ematches
+ */
+struct tcf_ematch_tree {
+	struct tcf_ematch_tree_hdr hdr;
+	struct tcf_ematch *	matches;
+	
+};
+
+/**
+ * struct tcf_ematch_ops - ematch module operations
+ * 
+ * @kind: identifier (kind) of this ematch module
+ * @datalen: length of expected configuration data (optional)
+ * @change: called during validation (optional)
+ * @match: called during ematch tree evaluation, must return 1/0
+ * @destroy: called during destroyage (optional)
+ * @dump: called during dumping process (optional)
+ * @owner: owner, must be set to THIS_MODULE
+ * @link: link to previous/next ematch module (internal use)
+ */
+struct tcf_ematch_ops {
+	int			kind;
+	int			datalen;
+	int			(*change)(struct tcf_proto *, void *,
+					  int, struct tcf_ematch *);
+	int			(*match)(struct sk_buff *, struct tcf_ematch *,
+					 struct tcf_pkt_info *);
+	void			(*destroy)(struct tcf_proto *,
+					   struct tcf_ematch *);
+	int			(*dump)(struct sk_buff *, struct tcf_ematch *);
+	struct module		*owner;
+	struct list_head	link;
+};
+
+extern int tcf_em_register(struct tcf_ematch_ops *);
+extern void tcf_em_unregister(struct tcf_ematch_ops *);
+extern int tcf_em_tree_validate(struct tcf_proto *, struct nlattr *,
+				struct tcf_ematch_tree *);
+extern void tcf_em_tree_destroy(struct tcf_proto *, struct tcf_ematch_tree *);
+extern int tcf_em_tree_dump(struct sk_buff *, struct tcf_ematch_tree *, int);
+extern int __tcf_em_tree_match(struct sk_buff *, struct tcf_ematch_tree *,
+			       struct tcf_pkt_info *);
+
+/**
+ * tcf_em_tree_change - replace ematch tree of a running classifier
+ *
+ * @tp: classifier kind handle
+ * @dst: destination ematch tree variable
+ * @src: source ematch tree (temporary tree from tcf_em_tree_validate)
+ *
+ * This functions replaces the ematch tree in @dst with the ematch
+ * tree in @src. The classifier in charge of the ematch tree may be
+ * running.
+ */
+static inline void tcf_em_tree_change(struct tcf_proto *tp,
+				      struct tcf_ematch_tree *dst,
+				      struct tcf_ematch_tree *src)
+{
+	tcf_tree_lock(tp);
+	memcpy(dst, src, sizeof(*dst));
+	tcf_tree_unlock(tp);
+}
+
+/**
+ * tcf_em_tree_match - evaulate an ematch tree
+ *
+ * @skb: socket buffer of the packet in question
+ * @tree: ematch tree to be used for evaluation
+ * @info: packet information examined by classifier
+ *
+ * This function matches @skb against the ematch tree in @tree by going
+ * through all ematches respecting their logic relations returning
+ * as soon as the result is obvious.
+ *
+ * Returns 1 if the ematch tree as-one matches, no ematches are configured
+ * or ematch is not enabled in the kernel, otherwise 0 is returned.
+ */
+static inline int tcf_em_tree_match(struct sk_buff *skb,
+				    struct tcf_ematch_tree *tree,
+				    struct tcf_pkt_info *info)
+{
+	if (tree->hdr.nmatches)
+		return __tcf_em_tree_match(skb, tree, info);
+	else
+		return 1;
+}
+
+#define MODULE_ALIAS_TCF_EMATCH(kind)	MODULE_ALIAS("ematch-kind-" __stringify(kind))
+
+#else /* CONFIG_NET_EMATCH */
+
+struct tcf_ematch_tree {
+};
+
+#define tcf_em_tree_validate(tp, tb, t) ((void)(t), 0)
+#define tcf_em_tree_destroy(tp, t) do { (void)(t); } while(0)
+#define tcf_em_tree_dump(skb, t, tlv) (0)
+#define tcf_em_tree_change(tp, dst, src) do { } while(0)
+#define tcf_em_tree_match(skb, t, info) ((void)(info), 1)
+
+#endif /* CONFIG_NET_EMATCH */
+
+static inline unsigned char * tcf_get_base_ptr(struct sk_buff *skb, int layer)
+{
+	switch (layer) {
+		case TCF_LAYER_LINK:
+			return skb->data;
+		case TCF_LAYER_NETWORK:
+			return skb_network_header(skb);
+		case TCF_LAYER_TRANSPORT:
+			return skb_transport_header(skb);
+	}
+
+	return NULL;
+}
+
+static inline int tcf_valid_offset(const struct sk_buff *skb,
+				   const unsigned char *ptr, const int len)
+{
+	return likely((ptr + len) <= skb_tail_pointer(skb) &&
+		      ptr >= skb->head &&
+		      (ptr <= (ptr + len)));
+}
+
+#ifdef CONFIG_NET_CLS_IND
+#include <net/net_namespace.h>
+
+static inline int
+tcf_change_indev(struct tcf_proto *tp, char *indev, struct nlattr *indev_tlv)
+{
+	if (nla_strlcpy(indev, indev_tlv, IFNAMSIZ) >= IFNAMSIZ)
+		return -EINVAL;
+	return 0;
+}
+
+static inline int
+tcf_match_indev(struct sk_buff *skb, char *indev)
+{
+	struct net_device *dev;
+
+	if (indev[0]) {
+		if  (!skb->skb_iif)
+			return 0;
+		dev = __dev_get_by_index(dev_net(skb->dev), skb->skb_iif);
+		if (!dev || strcmp(indev, dev->name))
+			return 0;
+	}
+
+	return 1;
+}
+#endif /* CONFIG_NET_CLS_IND */
+
+#endif
diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h
new file mode 100644
index 00000000..fffdc603
--- /dev/null
+++ b/include/net/pkt_sched.h
@@ -0,0 +1,115 @@
+#ifndef __NET_PKT_SCHED_H
+#define __NET_PKT_SCHED_H
+
+#include <linux/jiffies.h>
+#include <linux/ktime.h>
+#include <net/sch_generic.h>
+
+struct qdisc_walker {
+	int	stop;
+	int	skip;
+	int	count;
+	int	(*fn)(struct Qdisc *, unsigned long cl, struct qdisc_walker *);
+};
+
+#define QDISC_ALIGNTO		64
+#define QDISC_ALIGN(len)	(((len) + QDISC_ALIGNTO-1) & ~(QDISC_ALIGNTO-1))
+
+static inline void *qdisc_priv(struct Qdisc *q)
+{
+	return (char *) q + QDISC_ALIGN(sizeof(struct Qdisc));
+}
+
+/* 
+   Timer resolution MUST BE < 10% of min_schedulable_packet_size/bandwidth
+   
+   Normal IP packet size ~ 512byte, hence:
+
+   0.5Kbyte/1Mbyte/sec = 0.5msec, so that we need 50usec timer for
+   10Mbit ethernet.
+
+   10msec resolution -> <50Kbit/sec.
+   
+   The result: [34]86 is not good choice for QoS router :-(
+
+   The things are not so bad, because we may use artificial
+   clock evaluated by integration of network data flow
+   in the most critical places.
+ */
+
+typedef u64	psched_time_t;
+typedef long	psched_tdiff_t;
+
+/* Avoid doing 64 bit divide */
+#define PSCHED_SHIFT			6
+#define PSCHED_TICKS2NS(x)		((s64)(x) << PSCHED_SHIFT)
+#define PSCHED_NS2TICKS(x)		((x) >> PSCHED_SHIFT)
+
+#define PSCHED_TICKS_PER_SEC		PSCHED_NS2TICKS(NSEC_PER_SEC)
+#define PSCHED_PASTPERFECT		0
+
+static inline psched_time_t psched_get_time(void)
+{
+	return PSCHED_NS2TICKS(ktime_to_ns(ktime_get()));
+}
+
+static inline psched_tdiff_t
+psched_tdiff_bounded(psched_time_t tv1, psched_time_t tv2, psched_time_t bound)
+{
+	return min(tv1 - tv2, bound);
+}
+
+struct qdisc_watchdog {
+	struct hrtimer	timer;
+	struct Qdisc	*qdisc;
+};
+
+extern void qdisc_watchdog_init(struct qdisc_watchdog *wd, struct Qdisc *qdisc);
+extern void qdisc_watchdog_schedule(struct qdisc_watchdog *wd,
+				    psched_time_t expires);
+extern void qdisc_watchdog_cancel(struct qdisc_watchdog *wd);
+
+extern struct Qdisc_ops pfifo_qdisc_ops;
+extern struct Qdisc_ops bfifo_qdisc_ops;
+extern struct Qdisc_ops pfifo_head_drop_qdisc_ops;
+
+extern int fifo_set_limit(struct Qdisc *q, unsigned int limit);
+extern struct Qdisc *fifo_create_dflt(struct Qdisc *sch, struct Qdisc_ops *ops,
+				      unsigned int limit);
+
+extern int register_qdisc(struct Qdisc_ops *qops);
+extern int unregister_qdisc(struct Qdisc_ops *qops);
+extern void qdisc_list_del(struct Qdisc *q);
+extern struct Qdisc *qdisc_lookup(struct net_device *dev, u32 handle);
+extern struct Qdisc *qdisc_lookup_class(struct net_device *dev, u32 handle);
+extern struct qdisc_rate_table *qdisc_get_rtab(struct tc_ratespec *r,
+		struct nlattr *tab);
+extern void qdisc_put_rtab(struct qdisc_rate_table *tab);
+extern void qdisc_put_stab(struct qdisc_size_table *tab);
+extern void qdisc_warn_nonwc(char *txt, struct Qdisc *qdisc);
+extern int sch_direct_xmit(struct sk_buff *skb, struct Qdisc *q,
+			   struct net_device *dev, struct netdev_queue *txq,
+			   spinlock_t *root_lock);
+
+extern void __qdisc_run(struct Qdisc *q);
+
+static inline void qdisc_run(struct Qdisc *q)
+{
+	if (qdisc_run_begin(q))
+		__qdisc_run(q);
+}
+
+extern int tc_classify_compat(struct sk_buff *skb, const struct tcf_proto *tp,
+			      struct tcf_result *res);
+extern int tc_classify(struct sk_buff *skb, const struct tcf_proto *tp,
+		       struct tcf_result *res);
+
+/* Calculate maximal size of packet seen by hard_start_xmit
+   routine of this device.
+ */
+static inline unsigned psched_mtu(const struct net_device *dev)
+{
+	return dev->mtu + dev->hard_header_len;
+}
+
+#endif
diff --git a/include/net/protocol.h b/include/net/protocol.h
new file mode 100644
index 00000000..875f4895
--- /dev/null
+++ b/include/net/protocol.h
@@ -0,0 +1,110 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the protocol dispatcher.
+ *
+ * Version:	@(#)protocol.h	1.0.2	05/07/93
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ *	Changes:
+ *		Alan Cox	:	Added a name field and a frag handler
+ *					field for later.
+ *		Alan Cox	:	Cleaned up, and sorted types.
+ *		Pedro Roque	:	inet6 protocols
+ */
+ 
+#ifndef _PROTOCOL_H
+#define _PROTOCOL_H
+
+#include <linux/in6.h>
+#if IS_ENABLED(CONFIG_IPV6)
+#include <linux/ipv6.h>
+#endif
+
+#define MAX_INET_PROTOS	256		/* Must be a power of 2		*/
+
+
+/* This is used to register protocols. */
+struct net_protocol {
+	int			(*handler)(struct sk_buff *skb);
+	void			(*err_handler)(struct sk_buff *skb, u32 info);
+	int			(*gso_send_check)(struct sk_buff *skb);
+	struct sk_buff	       *(*gso_segment)(struct sk_buff *skb,
+					       netdev_features_t features);
+	struct sk_buff	      **(*gro_receive)(struct sk_buff **head,
+					       struct sk_buff *skb);
+	int			(*gro_complete)(struct sk_buff *skb);
+	unsigned int		no_policy:1,
+				netns_ok:1;
+};
+
+#if IS_ENABLED(CONFIG_IPV6)
+struct inet6_protocol {
+	int	(*handler)(struct sk_buff *skb);
+
+	void	(*err_handler)(struct sk_buff *skb,
+			       struct inet6_skb_parm *opt,
+			       u8 type, u8 code, int offset,
+			       __be32 info);
+
+	int	(*gso_send_check)(struct sk_buff *skb);
+	struct sk_buff *(*gso_segment)(struct sk_buff *skb,
+				       netdev_features_t features);
+	struct sk_buff **(*gro_receive)(struct sk_buff **head,
+					struct sk_buff *skb);
+	int	(*gro_complete)(struct sk_buff *skb);
+
+	unsigned int	flags;	/* INET6_PROTO_xxx */
+};
+
+#define INET6_PROTO_NOPOLICY	0x1
+#define INET6_PROTO_FINAL	0x2
+/* This should be set for any extension header which is compatible with GSO. */
+#define INET6_PROTO_GSO_EXTHDR	0x4
+#endif
+
+/* This is used to register socket interfaces for IP protocols.  */
+struct inet_protosw {
+	struct list_head list;
+
+        /* These two fields form the lookup key.  */
+	unsigned short	 type;	   /* This is the 2nd argument to socket(2). */
+	unsigned short	 protocol; /* This is the L4 protocol number.  */
+
+	struct proto	 *prot;
+	const struct proto_ops *ops;
+  
+	char             no_check;   /* checksum on rcv/xmit/none? */
+	unsigned char	 flags;      /* See INET_PROTOSW_* below.  */
+};
+#define INET_PROTOSW_REUSE 0x01	     /* Are ports automatically reusable? */
+#define INET_PROTOSW_PERMANENT 0x02  /* Permanent protocols are unremovable. */
+#define INET_PROTOSW_ICSK      0x04  /* Is this an inet_connection_sock? */
+
+extern const struct net_protocol __rcu *inet_protos[MAX_INET_PROTOS];
+
+#if IS_ENABLED(CONFIG_IPV6)
+extern const struct inet6_protocol __rcu *inet6_protos[MAX_INET_PROTOS];
+#endif
+
+extern int	inet_add_protocol(const struct net_protocol *prot, unsigned char num);
+extern int	inet_del_protocol(const struct net_protocol *prot, unsigned char num);
+extern void	inet_register_protosw(struct inet_protosw *p);
+extern void	inet_unregister_protosw(struct inet_protosw *p);
+
+#if IS_ENABLED(CONFIG_IPV6)
+extern int	inet6_add_protocol(const struct inet6_protocol *prot, unsigned char num);
+extern int	inet6_del_protocol(const struct inet6_protocol *prot, unsigned char num);
+extern int	inet6_register_protosw(struct inet_protosw *p);
+extern void	inet6_unregister_protosw(struct inet_protosw *p);
+#endif
+
+#endif	/* _PROTOCOL_H */
diff --git a/include/net/psnap.h b/include/net/psnap.h
new file mode 100644
index 00000000..fe456c29
--- /dev/null
+++ b/include/net/psnap.h
@@ -0,0 +1,11 @@
+#ifndef _NET_PSNAP_H
+#define _NET_PSNAP_H
+
+extern struct datalink_proto *
+register_snap_client(const unsigned char *desc,
+		     int (*rcvfunc)(struct sk_buff *, struct net_device *,
+				    struct packet_type *,
+				    struct net_device *orig_dev));
+extern void unregister_snap_client(struct datalink_proto *proto);
+
+#endif
diff --git a/include/net/raw.h b/include/net/raw.h
new file mode 100644
index 00000000..42ce6fe7
--- /dev/null
+++ b/include/net/raw.h
@@ -0,0 +1,75 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the RAW-IP module.
+ *
+ * Version:	@(#)raw.h	1.0.2	05/07/93
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _RAW_H
+#define _RAW_H
+
+
+#include <net/protocol.h>
+#include <linux/icmp.h>
+
+extern struct proto raw_prot;
+
+void raw_icmp_error(struct sk_buff *, int, u32);
+int raw_local_deliver(struct sk_buff *, int);
+
+extern int 	raw_rcv(struct sock *, struct sk_buff *);
+
+#define RAW_HTABLE_SIZE	MAX_INET_PROTOS
+
+struct raw_hashinfo {
+	rwlock_t lock;
+	struct hlist_head ht[RAW_HTABLE_SIZE];
+};
+
+#ifdef CONFIG_PROC_FS
+extern int  raw_proc_init(void);
+extern void raw_proc_exit(void);
+
+struct raw_iter_state {
+	struct seq_net_private p;
+	int bucket;
+	struct raw_hashinfo *h;
+};
+
+static inline struct raw_iter_state *raw_seq_private(struct seq_file *seq)
+{
+	return seq->private;
+}
+void *raw_seq_start(struct seq_file *seq, loff_t *pos);
+void *raw_seq_next(struct seq_file *seq, void *v, loff_t *pos);
+void raw_seq_stop(struct seq_file *seq, void *v);
+int raw_seq_open(struct inode *ino, struct file *file,
+		 struct raw_hashinfo *h, const struct seq_operations *ops);
+
+#endif
+
+void raw_hash_sk(struct sock *sk);
+void raw_unhash_sk(struct sock *sk);
+
+struct raw_sock {
+	/* inet_sock has to be the first member */
+	struct inet_sock   inet;
+	struct icmp_filter filter;
+	u32		   ipmr_table;
+};
+
+static inline struct raw_sock *raw_sk(const struct sock *sk)
+{
+	return (struct raw_sock *)sk;
+}
+
+#endif	/* _RAW_H */
diff --git a/include/net/rawv6.h b/include/net/rawv6.h
new file mode 100644
index 00000000..cf757723
--- /dev/null
+++ b/include/net/rawv6.h
@@ -0,0 +1,20 @@
+#ifndef _NET_RAWV6_H
+#define _NET_RAWV6_H
+
+#include <net/protocol.h>
+
+void raw6_icmp_error(struct sk_buff *, int nexthdr,
+		u8 type, u8 code, int inner_offset, __be32);
+int raw6_local_deliver(struct sk_buff *, int);
+
+extern int			rawv6_rcv(struct sock *sk,
+					  struct sk_buff *skb);
+
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
+int rawv6_mh_filter_register(int (*filter)(struct sock *sock,
+					   struct sk_buff *skb));
+int rawv6_mh_filter_unregister(int (*filter)(struct sock *sock,
+					     struct sk_buff *skb));
+#endif
+
+#endif
diff --git a/include/net/red.h b/include/net/red.h
new file mode 100644
index 00000000..ef46058d
--- /dev/null
+++ b/include/net/red.h
@@ -0,0 +1,405 @@
+#ifndef __NET_SCHED_RED_H
+#define __NET_SCHED_RED_H
+
+#include <linux/types.h>
+#include <linux/bug.h>
+#include <net/pkt_sched.h>
+#include <net/inet_ecn.h>
+#include <net/dsfield.h>
+#include <linux/reciprocal_div.h>
+
+/*	Random Early Detection (RED) algorithm.
+	=======================================
+
+	Source: Sally Floyd and Van Jacobson, "Random Early Detection Gateways
+	for Congestion Avoidance", 1993, IEEE/ACM Transactions on Networking.
+
+	This file codes a "divisionless" version of RED algorithm
+	as written down in Fig.17 of the paper.
+
+	Short description.
+	------------------
+
+	When a new packet arrives we calculate the average queue length:
+
+	avg = (1-W)*avg + W*current_queue_len,
+
+	W is the filter time constant (chosen as 2^(-Wlog)), it controls
+	the inertia of the algorithm. To allow larger bursts, W should be
+	decreased.
+
+	if (avg > th_max) -> packet marked (dropped).
+	if (avg < th_min) -> packet passes.
+	if (th_min < avg < th_max) we calculate probability:
+
+	Pb = max_P * (avg - th_min)/(th_max-th_min)
+
+	and mark (drop) packet with this probability.
+	Pb changes from 0 (at avg==th_min) to max_P (avg==th_max).
+	max_P should be small (not 1), usually 0.01..0.02 is good value.
+
+	max_P is chosen as a number, so that max_P/(th_max-th_min)
+	is a negative power of two in order arithmetics to contain
+	only shifts.
+
+
+	Parameters, settable by user:
+	-----------------------------
+
+	qth_min		- bytes (should be < qth_max/2)
+	qth_max		- bytes (should be at least 2*qth_min and less limit)
+	Wlog	       	- bits (<32) log(1/W).
+	Plog	       	- bits (<32)
+
+	Plog is related to max_P by formula:
+
+	max_P = (qth_max-qth_min)/2^Plog;
+
+	F.e. if qth_max=128K and qth_min=32K, then Plog=22
+	corresponds to max_P=0.02
+
+	Scell_log
+	Stab
+
+	Lookup table for log((1-W)^(t/t_ave).
+
+
+	NOTES:
+
+	Upper bound on W.
+	-----------------
+
+	If you want to allow bursts of L packets of size S,
+	you should choose W:
+
+	L + 1 - th_min/S < (1-(1-W)^L)/W
+
+	th_min/S = 32         th_min/S = 4
+
+	log(W)	L
+	-1	33
+	-2	35
+	-3	39
+	-4	46
+	-5	57
+	-6	75
+	-7	101
+	-8	135
+	-9	190
+	etc.
+ */
+
+/*
+ * Adaptative RED : An Algorithm for Increasing the Robustness of RED's AQM
+ * (Sally FLoyd, Ramakrishna Gummadi, and Scott Shenker) August 2001
+ *
+ * Every 500 ms:
+ *  if (avg > target and max_p <= 0.5)
+ *   increase max_p : max_p += alpha;
+ *  else if (avg < target and max_p >= 0.01)
+ *   decrease max_p : max_p *= beta;
+ *
+ * target :[qth_min + 0.4*(qth_min - qth_max),
+ *          qth_min + 0.6*(qth_min - qth_max)].
+ * alpha : min(0.01, max_p / 4)
+ * beta : 0.9
+ * max_P is a Q0.32 fixed point number (with 32 bits mantissa)
+ * max_P between 0.01 and 0.5 (1% - 50%) [ Its no longer a negative power of two ]
+ */
+#define RED_ONE_PERCENT ((u32)DIV_ROUND_CLOSEST(1ULL<<32, 100))
+
+#define MAX_P_MIN (1 * RED_ONE_PERCENT)
+#define MAX_P_MAX (50 * RED_ONE_PERCENT)
+#define MAX_P_ALPHA(val) min(MAX_P_MIN, val / 4)
+
+#define RED_STAB_SIZE	256
+#define RED_STAB_MASK	(RED_STAB_SIZE - 1)
+
+struct red_stats {
+	u32		prob_drop;	/* Early probability drops */
+	u32		prob_mark;	/* Early probability marks */
+	u32		forced_drop;	/* Forced drops, qavg > max_thresh */
+	u32		forced_mark;	/* Forced marks, qavg > max_thresh */
+	u32		pdrop;          /* Drops due to queue limits */
+	u32		other;          /* Drops due to drop() calls */
+};
+
+struct red_parms {
+	/* Parameters */
+	u32		qth_min;	/* Min avg length threshold: Wlog scaled */
+	u32		qth_max;	/* Max avg length threshold: Wlog scaled */
+	u32		Scell_max;
+	u32		max_P;		/* probability, [0 .. 1.0] 32 scaled */
+	u32		max_P_reciprocal; /* reciprocal_value(max_P / qth_delta) */
+	u32		qth_delta;	/* max_th - min_th */
+	u32		target_min;	/* min_th + 0.4*(max_th - min_th) */
+	u32		target_max;	/* min_th + 0.6*(max_th - min_th) */
+	u8		Scell_log;
+	u8		Wlog;		/* log(W)		*/
+	u8		Plog;		/* random number bits	*/
+	u8		Stab[RED_STAB_SIZE];
+};
+
+struct red_vars {
+	/* Variables */
+	int		qcount;		/* Number of packets since last random
+					   number generation */
+	u32		qR;		/* Cached random number */
+
+	unsigned long	qavg;		/* Average queue length: Wlog scaled */
+	ktime_t		qidlestart;	/* Start of current idle period */
+};
+
+static inline u32 red_maxp(u8 Plog)
+{
+	return Plog < 32 ? (~0U >> Plog) : ~0U;
+}
+
+static inline void red_set_vars(struct red_vars *v)
+{
+	/* Reset average queue length, the value is strictly bound
+	 * to the parameters below, reseting hurts a bit but leaving
+	 * it might result in an unreasonable qavg for a while. --TGR
+	 */
+	v->qavg		= 0;
+
+	v->qcount	= -1;
+}
+
+static inline void red_set_parms(struct red_parms *p,
+				 u32 qth_min, u32 qth_max, u8 Wlog, u8 Plog,
+				 u8 Scell_log, u8 *stab, u32 max_P)
+{
+	int delta = qth_max - qth_min;
+	u32 max_p_delta;
+
+	p->qth_min	= qth_min << Wlog;
+	p->qth_max	= qth_max << Wlog;
+	p->Wlog		= Wlog;
+	p->Plog		= Plog;
+	if (delta < 0)
+		delta = 1;
+	p->qth_delta	= delta;
+	if (!max_P) {
+		max_P = red_maxp(Plog);
+		max_P *= delta; /* max_P = (qth_max - qth_min)/2^Plog */
+	}
+	p->max_P = max_P;
+	max_p_delta = max_P / delta;
+	max_p_delta = max(max_p_delta, 1U);
+	p->max_P_reciprocal  = reciprocal_value(max_p_delta);
+
+	/* RED Adaptative target :
+	 * [min_th + 0.4*(min_th - max_th),
+	 *  min_th + 0.6*(min_th - max_th)].
+	 */
+	delta /= 5;
+	p->target_min = qth_min + 2*delta;
+	p->target_max = qth_min + 3*delta;
+
+	p->Scell_log	= Scell_log;
+	p->Scell_max	= (255 << Scell_log);
+
+	if (stab)
+		memcpy(p->Stab, stab, sizeof(p->Stab));
+}
+
+static inline int red_is_idling(const struct red_vars *v)
+{
+	return v->qidlestart.tv64 != 0;
+}
+
+static inline void red_start_of_idle_period(struct red_vars *v)
+{
+	v->qidlestart = ktime_get();
+}
+
+static inline void red_end_of_idle_period(struct red_vars *v)
+{
+	v->qidlestart.tv64 = 0;
+}
+
+static inline void red_restart(struct red_vars *v)
+{
+	red_end_of_idle_period(v);
+	v->qavg = 0;
+	v->qcount = -1;
+}
+
+static inline unsigned long red_calc_qavg_from_idle_time(const struct red_parms *p,
+							 const struct red_vars *v)
+{
+	s64 delta = ktime_us_delta(ktime_get(), v->qidlestart);
+	long us_idle = min_t(s64, delta, p->Scell_max);
+	int  shift;
+
+	/*
+	 * The problem: ideally, average length queue recalcultion should
+	 * be done over constant clock intervals. This is too expensive, so
+	 * that the calculation is driven by outgoing packets.
+	 * When the queue is idle we have to model this clock by hand.
+	 *
+	 * SF+VJ proposed to "generate":
+	 *
+	 *	m = idletime / (average_pkt_size / bandwidth)
+	 *
+	 * dummy packets as a burst after idle time, i.e.
+	 *
+	 * 	v->qavg *= (1-W)^m
+	 *
+	 * This is an apparently overcomplicated solution (f.e. we have to
+	 * precompute a table to make this calculation in reasonable time)
+	 * I believe that a simpler model may be used here,
+	 * but it is field for experiments.
+	 */
+
+	shift = p->Stab[(us_idle >> p->Scell_log) & RED_STAB_MASK];
+
+	if (shift)
+		return v->qavg >> shift;
+	else {
+		/* Approximate initial part of exponent with linear function:
+		 *
+		 * 	(1-W)^m ~= 1-mW + ...
+		 *
+		 * Seems, it is the best solution to
+		 * problem of too coarse exponent tabulation.
+		 */
+		us_idle = (v->qavg * (u64)us_idle) >> p->Scell_log;
+
+		if (us_idle < (v->qavg >> 1))
+			return v->qavg - us_idle;
+		else
+			return v->qavg >> 1;
+	}
+}
+
+static inline unsigned long red_calc_qavg_no_idle_time(const struct red_parms *p,
+						       const struct red_vars *v,
+						       unsigned int backlog)
+{
+	/*
+	 * NOTE: v->qavg is fixed point number with point at Wlog.
+	 * The formula below is equvalent to floating point
+	 * version:
+	 *
+	 * 	qavg = qavg*(1-W) + backlog*W;
+	 *
+	 * --ANK (980924)
+	 */
+	return v->qavg + (backlog - (v->qavg >> p->Wlog));
+}
+
+static inline unsigned long red_calc_qavg(const struct red_parms *p,
+					  const struct red_vars *v,
+					  unsigned int backlog)
+{
+	if (!red_is_idling(v))
+		return red_calc_qavg_no_idle_time(p, v, backlog);
+	else
+		return red_calc_qavg_from_idle_time(p, v);
+}
+
+
+static inline u32 red_random(const struct red_parms *p)
+{
+	return reciprocal_divide(net_random(), p->max_P_reciprocal);
+}
+
+static inline int red_mark_probability(const struct red_parms *p,
+				       const struct red_vars *v,
+				       unsigned long qavg)
+{
+	/* The formula used below causes questions.
+
+	   OK. qR is random number in the interval
+		(0..1/max_P)*(qth_max-qth_min)
+	   i.e. 0..(2^Plog). If we used floating point
+	   arithmetics, it would be: (2^Plog)*rnd_num,
+	   where rnd_num is less 1.
+
+	   Taking into account, that qavg have fixed
+	   point at Wlog, two lines
+	   below have the following floating point equivalent:
+
+	   max_P*(qavg - qth_min)/(qth_max-qth_min) < rnd/qcount
+
+	   Any questions? --ANK (980924)
+	 */
+	return !(((qavg - p->qth_min) >> p->Wlog) * v->qcount < v->qR);
+}
+
+enum {
+	RED_BELOW_MIN_THRESH,
+	RED_BETWEEN_TRESH,
+	RED_ABOVE_MAX_TRESH,
+};
+
+static inline int red_cmp_thresh(const struct red_parms *p, unsigned long qavg)
+{
+	if (qavg < p->qth_min)
+		return RED_BELOW_MIN_THRESH;
+	else if (qavg >= p->qth_max)
+		return RED_ABOVE_MAX_TRESH;
+	else
+		return RED_BETWEEN_TRESH;
+}
+
+enum {
+	RED_DONT_MARK,
+	RED_PROB_MARK,
+	RED_HARD_MARK,
+};
+
+static inline int red_action(const struct red_parms *p,
+			     struct red_vars *v,
+			     unsigned long qavg)
+{
+	switch (red_cmp_thresh(p, qavg)) {
+		case RED_BELOW_MIN_THRESH:
+			v->qcount = -1;
+			return RED_DONT_MARK;
+
+		case RED_BETWEEN_TRESH:
+			if (++v->qcount) {
+				if (red_mark_probability(p, v, qavg)) {
+					v->qcount = 0;
+					v->qR = red_random(p);
+					return RED_PROB_MARK;
+				}
+			} else
+				v->qR = red_random(p);
+
+			return RED_DONT_MARK;
+
+		case RED_ABOVE_MAX_TRESH:
+			v->qcount = -1;
+			return RED_HARD_MARK;
+	}
+
+	BUG();
+	return RED_DONT_MARK;
+}
+
+static inline void red_adaptative_algo(struct red_parms *p, struct red_vars *v)
+{
+	unsigned long qavg;
+	u32 max_p_delta;
+
+	qavg = v->qavg;
+	if (red_is_idling(v))
+		qavg = red_calc_qavg_from_idle_time(p, v);
+
+	/* v->qavg is fixed point number with point at Wlog */
+	qavg >>= p->Wlog;
+
+	if (qavg > p->target_max && p->max_P <= MAX_P_MAX)
+		p->max_P += MAX_P_ALPHA(p->max_P); /* maxp = maxp + alpha */
+	else if (qavg < p->target_min && p->max_P >= MAX_P_MIN)
+		p->max_P = (p->max_P/10)*9; /* maxp = maxp * Beta */
+
+	max_p_delta = DIV_ROUND_CLOSEST(p->max_P, p->qth_delta);
+	max_p_delta = max(max_p_delta, 1U);
+	p->max_P_reciprocal = reciprocal_value(max_p_delta);
+}
+#endif
diff --git a/include/net/regulatory.h b/include/net/regulatory.h
new file mode 100644
index 00000000..a5f79933
--- /dev/null
+++ b/include/net/regulatory.h
@@ -0,0 +1,122 @@
+#ifndef __NET_REGULATORY_H
+#define __NET_REGULATORY_H
+/*
+ * regulatory support structures
+ *
+ * Copyright 2008-2009	Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+
+/**
+ * enum environment_cap - Environment parsed from country IE
+ * @ENVIRON_ANY: indicates country IE applies to both indoor and
+ *	outdoor operation.
+ * @ENVIRON_INDOOR: indicates country IE applies only to indoor operation
+ * @ENVIRON_OUTDOOR: indicates country IE applies only to outdoor operation
+ */
+enum environment_cap {
+	ENVIRON_ANY,
+	ENVIRON_INDOOR,
+	ENVIRON_OUTDOOR,
+};
+
+/**
+ * struct regulatory_request - used to keep track of regulatory requests
+ *
+ * @wiphy_idx: this is set if this request's initiator is
+ * 	%REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This
+ * 	can be used by the wireless core to deal with conflicts
+ * 	and potentially inform users of which devices specifically
+ * 	cased the conflicts.
+ * @initiator: indicates who sent this request, could be any of
+ * 	of those set in nl80211_reg_initiator (%NL80211_REGDOM_SET_BY_*)
+ * @alpha2: the ISO / IEC 3166 alpha2 country code of the requested
+ * 	regulatory domain. We have a few special codes:
+ * 	00 - World regulatory domain
+ * 	99 - built by driver but a specific alpha2 cannot be determined
+ * 	98 - result of an intersection between two regulatory domains
+ *	97 - regulatory domain has not yet been configured
+ * @dfs_region: If CRDA responded with a regulatory domain that requires
+ *	DFS master operation on a known DFS region (NL80211_DFS_*),
+ *	dfs_region represents that region. Drivers can use this and the
+ *	@alpha2 to adjust their device's DFS parameters as required.
+ * @intersect: indicates whether the wireless core should intersect
+ * 	the requested regulatory domain with the presently set regulatory
+ * 	domain.
+ * @processed: indicates whether or not this requests has already been
+ *	processed. When the last request is processed it means that the
+ *	currently regulatory domain set on cfg80211 is updated from
+ *	CRDA and can be used by other regulatory requests. When a
+ *	the last request is not yet processed we must yield until it
+ *	is processed before processing any new requests.
+ * @country_ie_checksum: checksum of the last processed and accepted
+ * 	country IE
+ * @country_ie_env: lets us know if the AP is telling us we are outdoor,
+ * 	indoor, or if it doesn't matter
+ * @list: used to insert into the reg_requests_list linked list
+ */
+struct regulatory_request {
+	int wiphy_idx;
+	enum nl80211_reg_initiator initiator;
+	char alpha2[2];
+	u8 dfs_region;
+	bool intersect;
+	bool processed;
+	enum environment_cap country_ie_env;
+	struct list_head list;
+};
+
+struct ieee80211_freq_range {
+	u32 start_freq_khz;
+	u32 end_freq_khz;
+	u32 max_bandwidth_khz;
+};
+
+struct ieee80211_power_rule {
+	u32 max_antenna_gain;
+	u32 max_eirp;
+};
+
+struct ieee80211_reg_rule {
+	struct ieee80211_freq_range freq_range;
+	struct ieee80211_power_rule power_rule;
+	u32 flags;
+};
+
+struct ieee80211_regdomain {
+	u32 n_reg_rules;
+	char alpha2[2];
+	u8 dfs_region;
+	struct ieee80211_reg_rule reg_rules[];
+};
+
+#define MHZ_TO_KHZ(freq) ((freq) * 1000)
+#define KHZ_TO_MHZ(freq) ((freq) / 1000)
+#define DBI_TO_MBI(gain) ((gain) * 100)
+#define MBI_TO_DBI(gain) ((gain) / 100)
+#define DBM_TO_MBM(gain) ((gain) * 100)
+#define MBM_TO_DBM(gain) ((gain) / 100)
+
+#define REG_RULE(start, end, bw, gain, eirp, reg_flags) \
+{							\
+	.freq_range.start_freq_khz = MHZ_TO_KHZ(start),	\
+	.freq_range.end_freq_khz = MHZ_TO_KHZ(end),	\
+	.freq_range.max_bandwidth_khz = MHZ_TO_KHZ(bw),	\
+	.power_rule.max_antenna_gain = DBI_TO_MBI(gain),\
+	.power_rule.max_eirp = DBM_TO_MBM(eirp),	\
+	.flags = reg_flags,				\
+}
+
+#endif
diff --git a/include/net/request_sock.h b/include/net/request_sock.h
new file mode 100644
index 00000000..4c0766e2
--- /dev/null
+++ b/include/net/request_sock.h
@@ -0,0 +1,258 @@
+/*
+ * NET		Generic infrastructure for Network protocols.
+ *
+ *		Definitions for request_sock 
+ *
+ * Authors:	Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ *
+ * 		From code originally in include/net/tcp.h
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _REQUEST_SOCK_H
+#define _REQUEST_SOCK_H
+
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/bug.h>
+
+#include <net/sock.h>
+
+struct request_sock;
+struct sk_buff;
+struct dst_entry;
+struct proto;
+
+/* empty to "strongly type" an otherwise void parameter.
+ */
+struct request_values {
+};
+
+struct request_sock_ops {
+	int		family;
+	int		obj_size;
+	struct kmem_cache	*slab;
+	char		*slab_name;
+	int		(*rtx_syn_ack)(struct sock *sk,
+				       struct request_sock *req,
+				       struct request_values *rvp);
+	void		(*send_ack)(struct sock *sk, struct sk_buff *skb,
+				    struct request_sock *req);
+	void		(*send_reset)(struct sock *sk,
+				      struct sk_buff *skb);
+	void		(*destructor)(struct request_sock *req);
+	void		(*syn_ack_timeout)(struct sock *sk,
+					   struct request_sock *req);
+};
+
+/* struct request_sock - mini sock to represent a connection request
+ */
+struct request_sock {
+	struct request_sock		*dl_next; /* Must be first member! */
+	u16				mss;
+	u8				retrans;
+	u8				cookie_ts; /* syncookie: encode tcpopts in timestamp */
+	/* The following two fields can be easily recomputed I think -AK */
+	u32				window_clamp; /* window clamp at creation time */
+	u32				rcv_wnd;	  /* rcv_wnd offered first time */
+	u32				ts_recent;
+	unsigned long			expires;
+	const struct request_sock_ops	*rsk_ops;
+	struct sock			*sk;
+	u32				secid;
+	u32				peer_secid;
+};
+
+static inline struct request_sock *reqsk_alloc(const struct request_sock_ops *ops)
+{
+	struct request_sock *req = kmem_cache_alloc(ops->slab, GFP_ATOMIC);
+
+	if (req != NULL)
+		req->rsk_ops = ops;
+
+	return req;
+}
+
+static inline void __reqsk_free(struct request_sock *req)
+{
+	kmem_cache_free(req->rsk_ops->slab, req);
+}
+
+static inline void reqsk_free(struct request_sock *req)
+{
+	req->rsk_ops->destructor(req);
+	__reqsk_free(req);
+}
+
+extern int sysctl_max_syn_backlog;
+
+/** struct listen_sock - listen state
+ *
+ * @max_qlen_log - log_2 of maximal queued SYNs/REQUESTs
+ */
+struct listen_sock {
+	u8			max_qlen_log;
+	u8			synflood_warned;
+	/* 2 bytes hole, try to use */
+	int			qlen;
+	int			qlen_young;
+	int			clock_hand;
+	u32			hash_rnd;
+	u32			nr_table_entries;
+	struct request_sock	*syn_table[0];
+};
+
+/** struct request_sock_queue - queue of request_socks
+ *
+ * @rskq_accept_head - FIFO head of established children
+ * @rskq_accept_tail - FIFO tail of established children
+ * @rskq_defer_accept - User waits for some data after accept()
+ * @syn_wait_lock - serializer
+ *
+ * %syn_wait_lock is necessary only to avoid proc interface having to grab the main
+ * lock sock while browsing the listening hash (otherwise it's deadlock prone).
+ *
+ * This lock is acquired in read mode only from listening_get_next() seq_file
+ * op and it's acquired in write mode _only_ from code that is actively
+ * changing rskq_accept_head. All readers that are holding the master sock lock
+ * don't need to grab this lock in read mode too as rskq_accept_head. writes
+ * are always protected from the main sock lock.
+ */
+struct request_sock_queue {
+	struct request_sock	*rskq_accept_head;
+	struct request_sock	*rskq_accept_tail;
+	rwlock_t		syn_wait_lock;
+	u8			rskq_defer_accept;
+	/* 3 bytes hole, try to pack */
+	struct listen_sock	*listen_opt;
+};
+
+extern int reqsk_queue_alloc(struct request_sock_queue *queue,
+			     unsigned int nr_table_entries);
+
+extern void __reqsk_queue_destroy(struct request_sock_queue *queue);
+extern void reqsk_queue_destroy(struct request_sock_queue *queue);
+
+static inline struct request_sock *
+	reqsk_queue_yank_acceptq(struct request_sock_queue *queue)
+{
+	struct request_sock *req = queue->rskq_accept_head;
+
+	queue->rskq_accept_head = NULL;
+	return req;
+}
+
+static inline int reqsk_queue_empty(struct request_sock_queue *queue)
+{
+	return queue->rskq_accept_head == NULL;
+}
+
+static inline void reqsk_queue_unlink(struct request_sock_queue *queue,
+				      struct request_sock *req,
+				      struct request_sock **prev_req)
+{
+	write_lock(&queue->syn_wait_lock);
+	*prev_req = req->dl_next;
+	write_unlock(&queue->syn_wait_lock);
+}
+
+static inline void reqsk_queue_add(struct request_sock_queue *queue,
+				   struct request_sock *req,
+				   struct sock *parent,
+				   struct sock *child)
+{
+	req->sk = child;
+	sk_acceptq_added(parent);
+
+	if (queue->rskq_accept_head == NULL)
+		queue->rskq_accept_head = req;
+	else
+		queue->rskq_accept_tail->dl_next = req;
+
+	queue->rskq_accept_tail = req;
+	req->dl_next = NULL;
+}
+
+static inline struct request_sock *reqsk_queue_remove(struct request_sock_queue *queue)
+{
+	struct request_sock *req = queue->rskq_accept_head;
+
+	WARN_ON(req == NULL);
+
+	queue->rskq_accept_head = req->dl_next;
+	if (queue->rskq_accept_head == NULL)
+		queue->rskq_accept_tail = NULL;
+
+	return req;
+}
+
+static inline struct sock *reqsk_queue_get_child(struct request_sock_queue *queue,
+						 struct sock *parent)
+{
+	struct request_sock *req = reqsk_queue_remove(queue);
+	struct sock *child = req->sk;
+
+	WARN_ON(child == NULL);
+
+	sk_acceptq_removed(parent);
+	__reqsk_free(req);
+	return child;
+}
+
+static inline int reqsk_queue_removed(struct request_sock_queue *queue,
+				      struct request_sock *req)
+{
+	struct listen_sock *lopt = queue->listen_opt;
+
+	if (req->retrans == 0)
+		--lopt->qlen_young;
+
+	return --lopt->qlen;
+}
+
+static inline int reqsk_queue_added(struct request_sock_queue *queue)
+{
+	struct listen_sock *lopt = queue->listen_opt;
+	const int prev_qlen = lopt->qlen;
+
+	lopt->qlen_young++;
+	lopt->qlen++;
+	return prev_qlen;
+}
+
+static inline int reqsk_queue_len(const struct request_sock_queue *queue)
+{
+	return queue->listen_opt != NULL ? queue->listen_opt->qlen : 0;
+}
+
+static inline int reqsk_queue_len_young(const struct request_sock_queue *queue)
+{
+	return queue->listen_opt->qlen_young;
+}
+
+static inline int reqsk_queue_is_full(const struct request_sock_queue *queue)
+{
+	return queue->listen_opt->qlen >> queue->listen_opt->max_qlen_log;
+}
+
+static inline void reqsk_queue_hash_req(struct request_sock_queue *queue,
+					u32 hash, struct request_sock *req,
+					unsigned long timeout)
+{
+	struct listen_sock *lopt = queue->listen_opt;
+
+	req->expires = jiffies + timeout;
+	req->retrans = 0;
+	req->sk = NULL;
+	req->dl_next = lopt->syn_table[hash];
+
+	write_lock(&queue->syn_wait_lock);
+	lopt->syn_table[hash] = req;
+	write_unlock(&queue->syn_wait_lock);
+}
+
+#endif /* _REQUEST_SOCK_H */
diff --git a/include/net/rose.h b/include/net/rose.h
new file mode 100644
index 00000000..555dd198
--- /dev/null
+++ b/include/net/rose.h
@@ -0,0 +1,241 @@
+/*
+ *	Declarations of Rose type objects.
+ *
+ *	Jonathan Naylor G4KLX	25/8/96
+ */
+
+#ifndef _ROSE_H
+#define _ROSE_H 
+
+#include <linux/rose.h>
+#include <net/sock.h>
+
+#define	ROSE_ADDR_LEN			5
+
+#define	ROSE_MIN_LEN			3
+
+#define	ROSE_CALL_REQ_ADDR_LEN_OFF	3
+#define	ROSE_CALL_REQ_ADDR_LEN_VAL	0xAA	/* each address is 10 digits */
+#define	ROSE_CALL_REQ_DEST_ADDR_OFF	4
+#define	ROSE_CALL_REQ_SRC_ADDR_OFF	9
+#define	ROSE_CALL_REQ_FACILITIES_OFF	14
+
+#define	ROSE_GFI			0x10
+#define	ROSE_Q_BIT			0x80
+#define	ROSE_D_BIT			0x40
+#define	ROSE_M_BIT			0x10
+
+#define	ROSE_CALL_REQUEST		0x0B
+#define	ROSE_CALL_ACCEPTED		0x0F
+#define	ROSE_CLEAR_REQUEST		0x13
+#define	ROSE_CLEAR_CONFIRMATION		0x17
+#define	ROSE_DATA			0x00
+#define	ROSE_INTERRUPT			0x23
+#define	ROSE_INTERRUPT_CONFIRMATION	0x27
+#define	ROSE_RR				0x01
+#define	ROSE_RNR			0x05
+#define	ROSE_REJ			0x09
+#define	ROSE_RESET_REQUEST		0x1B
+#define	ROSE_RESET_CONFIRMATION		0x1F
+#define	ROSE_REGISTRATION_REQUEST	0xF3
+#define	ROSE_REGISTRATION_CONFIRMATION	0xF7
+#define	ROSE_RESTART_REQUEST		0xFB
+#define	ROSE_RESTART_CONFIRMATION	0xFF
+#define	ROSE_DIAGNOSTIC			0xF1
+#define	ROSE_ILLEGAL			0xFD
+
+/* Define Link State constants. */
+
+enum {
+	ROSE_STATE_0,			/* Ready */
+	ROSE_STATE_1,			/* Awaiting Call Accepted */
+	ROSE_STATE_2,			/* Awaiting Clear Confirmation */
+	ROSE_STATE_3,			/* Data Transfer */
+	ROSE_STATE_4,			/* Awaiting Reset Confirmation */
+	ROSE_STATE_5			/* Deferred Call Acceptance */
+};
+
+#define ROSE_DEFAULT_T0			180000		/* Default T10 T20 value */
+#define ROSE_DEFAULT_T1			200000		/* Default T11 T21 value */
+#define ROSE_DEFAULT_T2			180000		/* Default T12 T22 value */
+#define	ROSE_DEFAULT_T3			180000		/* Default T13 T23 value */
+#define	ROSE_DEFAULT_HB			5000		/* Default Holdback value */
+#define	ROSE_DEFAULT_IDLE		0		/* No Activity Timeout - none */
+#define	ROSE_DEFAULT_ROUTING		1		/* Default routing flag */
+#define	ROSE_DEFAULT_FAIL_TIMEOUT	120000		/* Time until link considered usable */
+#define	ROSE_DEFAULT_MAXVC		50		/* Maximum number of VCs per neighbour */
+#define	ROSE_DEFAULT_WINDOW_SIZE	7		/* Default window size */
+
+#define ROSE_MODULUS 			8
+#define	ROSE_MAX_PACKET_SIZE		251		/* Maximum packet size */
+
+#define	ROSE_COND_ACK_PENDING		0x01
+#define	ROSE_COND_PEER_RX_BUSY		0x02
+#define	ROSE_COND_OWN_RX_BUSY		0x04
+
+#define	FAC_NATIONAL			0x00
+#define	FAC_CCITT			0x0F
+
+#define	FAC_NATIONAL_RAND		0x7F
+#define	FAC_NATIONAL_FLAGS		0x3F
+#define	FAC_NATIONAL_DEST_DIGI		0xE9
+#define	FAC_NATIONAL_SRC_DIGI		0xEB
+#define	FAC_NATIONAL_FAIL_CALL		0xED
+#define	FAC_NATIONAL_FAIL_ADD		0xEE
+#define	FAC_NATIONAL_DIGIS			0xEF
+
+#define	FAC_CCITT_DEST_NSAP		0xC9
+#define	FAC_CCITT_SRC_NSAP		0xCB
+
+struct rose_neigh {
+	struct rose_neigh	*next;
+	ax25_address		callsign;
+	ax25_digi		*digipeat;
+	ax25_cb			*ax25;
+	struct net_device		*dev;
+	unsigned short		count;
+	unsigned short		use;
+	unsigned int		number;
+	char			restarted;
+	char			dce_mode;
+	char			loopback;
+	struct sk_buff_head	queue;
+	struct timer_list	t0timer;
+	struct timer_list	ftimer;
+};
+
+struct rose_node {
+	struct rose_node	*next;
+	rose_address		address;
+	unsigned short		mask;
+	unsigned char		count;
+	char			loopback;
+	struct rose_neigh	*neighbour[3];
+};
+
+struct rose_route {
+	struct rose_route	*next;
+	unsigned int		lci1, lci2;
+	rose_address		src_addr, dest_addr;
+	ax25_address		src_call, dest_call;
+	struct rose_neigh 	*neigh1, *neigh2;
+	unsigned int		rand;
+};
+
+struct rose_sock {
+	struct sock		sock;
+	rose_address		source_addr,   dest_addr;
+	ax25_address		source_call,   dest_call;
+	unsigned char		source_ndigis, dest_ndigis;
+	ax25_address		source_digis[ROSE_MAX_DIGIS];
+	ax25_address		dest_digis[ROSE_MAX_DIGIS];
+	struct rose_neigh	*neighbour;
+	struct net_device		*device;
+	unsigned int		lci, rand;
+	unsigned char		state, condition, qbitincl, defer;
+	unsigned char		cause, diagnostic;
+	unsigned short		vs, vr, va, vl;
+	unsigned long		t1, t2, t3, hb, idle;
+#ifdef M_BIT
+	unsigned short		fraglen;
+	struct sk_buff_head	frag_queue;
+#endif
+	struct sk_buff_head	ack_queue;
+	struct rose_facilities_struct facilities;
+	struct timer_list	timer;
+	struct timer_list	idletimer;
+};
+
+#define rose_sk(sk) ((struct rose_sock *)(sk))
+
+/* af_rose.c */
+extern ax25_address rose_callsign;
+extern int  sysctl_rose_restart_request_timeout;
+extern int  sysctl_rose_call_request_timeout;
+extern int  sysctl_rose_reset_request_timeout;
+extern int  sysctl_rose_clear_request_timeout;
+extern int  sysctl_rose_no_activity_timeout;
+extern int  sysctl_rose_ack_hold_back_timeout;
+extern int  sysctl_rose_routing_control;
+extern int  sysctl_rose_link_fail_timeout;
+extern int  sysctl_rose_maximum_vcs;
+extern int  sysctl_rose_window_size;
+extern int  rosecmp(rose_address *, rose_address *);
+extern int  rosecmpm(rose_address *, rose_address *, unsigned short);
+extern char *rose2asc(char *buf, const rose_address *);
+extern struct sock *rose_find_socket(unsigned int, struct rose_neigh *);
+extern void rose_kill_by_neigh(struct rose_neigh *);
+extern unsigned int rose_new_lci(struct rose_neigh *);
+extern int  rose_rx_call_request(struct sk_buff *, struct net_device *, struct rose_neigh *, unsigned int);
+extern void rose_destroy_socket(struct sock *);
+
+/* rose_dev.c */
+extern void  rose_setup(struct net_device *);
+
+/* rose_in.c */
+extern int  rose_process_rx_frame(struct sock *, struct sk_buff *);
+
+/* rose_link.c */
+extern void rose_start_ftimer(struct rose_neigh *);
+extern void rose_stop_ftimer(struct rose_neigh *);
+extern void rose_stop_t0timer(struct rose_neigh *);
+extern int  rose_ftimer_running(struct rose_neigh *);
+extern void rose_link_rx_restart(struct sk_buff *, struct rose_neigh *, unsigned short);
+extern void rose_transmit_clear_request(struct rose_neigh *, unsigned int, unsigned char, unsigned char);
+extern void rose_transmit_link(struct sk_buff *, struct rose_neigh *);
+
+/* rose_loopback.c */
+extern void rose_loopback_init(void);
+extern void rose_loopback_clear(void);
+extern int  rose_loopback_queue(struct sk_buff *, struct rose_neigh *);
+
+/* rose_out.c */
+extern void rose_kick(struct sock *);
+extern void rose_enquiry_response(struct sock *);
+
+/* rose_route.c */
+extern struct rose_neigh *rose_loopback_neigh;
+extern const struct file_operations rose_neigh_fops;
+extern const struct file_operations rose_nodes_fops;
+extern const struct file_operations rose_routes_fops;
+
+extern void rose_add_loopback_neigh(void);
+extern int __must_check rose_add_loopback_node(rose_address *);
+extern void rose_del_loopback_node(rose_address *);
+extern void rose_rt_device_down(struct net_device *);
+extern void rose_link_device_down(struct net_device *);
+extern struct net_device *rose_dev_first(void);
+extern struct net_device *rose_dev_get(rose_address *);
+extern struct rose_route *rose_route_free_lci(unsigned int, struct rose_neigh *);
+extern struct rose_neigh *rose_get_neigh(rose_address *, unsigned char *, unsigned char *, int);
+extern int  rose_rt_ioctl(unsigned int, void __user *);
+extern void rose_link_failed(ax25_cb *, int);
+extern int  rose_route_frame(struct sk_buff *, ax25_cb *);
+extern void rose_rt_free(void);
+
+/* rose_subr.c */
+extern void rose_clear_queues(struct sock *);
+extern void rose_frames_acked(struct sock *, unsigned short);
+extern void rose_requeue_frames(struct sock *);
+extern int  rose_validate_nr(struct sock *, unsigned short);
+extern void rose_write_internal(struct sock *, int);
+extern int  rose_decode(struct sk_buff *, int *, int *, int *, int *, int *);
+extern int  rose_parse_facilities(unsigned char *, unsigned int, struct rose_facilities_struct *);
+extern void rose_disconnect(struct sock *, int, int, int);
+
+/* rose_timer.c */
+extern void rose_start_heartbeat(struct sock *);
+extern void rose_start_t1timer(struct sock *);
+extern void rose_start_t2timer(struct sock *);
+extern void rose_start_t3timer(struct sock *);
+extern void rose_start_hbtimer(struct sock *);
+extern void rose_start_idletimer(struct sock *);
+extern void rose_stop_heartbeat(struct sock *);
+extern void rose_stop_timer(struct sock *);
+extern void rose_stop_idletimer(struct sock *);
+
+/* sysctl_net_rose.c */
+extern void rose_register_sysctl(void);
+extern void rose_unregister_sysctl(void);
+
+#endif
diff --git a/include/net/route.h b/include/net/route.h
new file mode 100644
index 00000000..b1c0d5b5
--- /dev/null
+++ b/include/net/route.h
@@ -0,0 +1,324 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET  is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the IP router.
+ *
+ * Version:	@(#)route.h	1.0.4	05/27/93
+ *
+ * Authors:	Ross Biro
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ * Fixes:
+ *		Alan Cox	:	Reformatted. Added ip_rt_local()
+ *		Alan Cox	:	Support for TCP parameters.
+ *		Alexey Kuznetsov:	Major changes for new routing code.
+ *		Mike McLagan    :	Routing by source
+ *		Robert Olsson   :	Added rt_cache statistics
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _ROUTE_H
+#define _ROUTE_H
+
+#include <net/dst.h>
+#include <net/inetpeer.h>
+#include <net/flow.h>
+#include <net/inet_sock.h>
+#include <linux/in_route.h>
+#include <linux/rtnetlink.h>
+#include <linux/route.h>
+#include <linux/ip.h>
+#include <linux/cache.h>
+#include <linux/security.h>
+
+#define RTO_ONLINK	0x01
+
+#define RT_CONN_FLAGS(sk)   (RT_TOS(inet_sk(sk)->tos) | sock_flag(sk, SOCK_LOCALROUTE))
+
+struct fib_nh;
+struct inet_peer;
+struct fib_info;
+struct rtable {
+	struct dst_entry	dst;
+
+	/* Lookup key. */
+	__be32			rt_key_dst;
+	__be32			rt_key_src;
+
+	int			rt_genid;
+	unsigned		rt_flags;
+	__u16			rt_type;
+	__u8			rt_key_tos;
+
+	__be32			rt_dst;	/* Path destination	*/
+	__be32			rt_src;	/* Path source		*/
+	int			rt_route_iif;
+	int			rt_iif;
+	int			rt_oif;
+	__u32			rt_mark;
+
+	/* Info on neighbour */
+	__be32			rt_gateway;
+
+	/* Miscellaneous cached information */
+	__be32			rt_spec_dst; /* RFC1122 specific destination */
+	u32			rt_peer_genid;
+	struct inet_peer	*peer; /* long-living peer info */
+	struct fib_info		*fi; /* for client ref to shared metrics */
+};
+
+static inline bool rt_is_input_route(const struct rtable *rt)
+{
+	return rt->rt_route_iif != 0;
+}
+
+static inline bool rt_is_output_route(const struct rtable *rt)
+{
+	return rt->rt_route_iif == 0;
+}
+
+struct ip_rt_acct {
+	__u32 	o_bytes;
+	__u32 	o_packets;
+	__u32 	i_bytes;
+	__u32 	i_packets;
+};
+
+struct rt_cache_stat {
+        unsigned int in_hit;
+        unsigned int in_slow_tot;
+        unsigned int in_slow_mc;
+        unsigned int in_no_route;
+        unsigned int in_brd;
+        unsigned int in_martian_dst;
+        unsigned int in_martian_src;
+        unsigned int out_hit;
+        unsigned int out_slow_tot;
+        unsigned int out_slow_mc;
+        unsigned int gc_total;
+        unsigned int gc_ignored;
+        unsigned int gc_goal_miss;
+        unsigned int gc_dst_overflow;
+        unsigned int in_hlist_search;
+        unsigned int out_hlist_search;
+};
+
+extern struct ip_rt_acct __percpu *ip_rt_acct;
+
+struct in_device;
+extern int		ip_rt_init(void);
+extern void		ip_rt_redirect(__be32 old_gw, __be32 dst, __be32 new_gw,
+				       __be32 src, struct net_device *dev);
+extern void		rt_cache_flush(struct net *net, int how);
+extern void		rt_cache_flush_batch(struct net *net);
+extern struct rtable *__ip_route_output_key(struct net *, struct flowi4 *flp);
+extern struct rtable *ip_route_output_flow(struct net *, struct flowi4 *flp,
+					   struct sock *sk);
+extern struct dst_entry *ipv4_blackhole_route(struct net *net, struct dst_entry *dst_orig);
+
+static inline struct rtable *ip_route_output_key(struct net *net, struct flowi4 *flp)
+{
+	return ip_route_output_flow(net, flp, NULL);
+}
+
+static inline struct rtable *ip_route_output(struct net *net, __be32 daddr,
+					     __be32 saddr, u8 tos, int oif)
+{
+	struct flowi4 fl4 = {
+		.flowi4_oif = oif,
+		.daddr = daddr,
+		.saddr = saddr,
+		.flowi4_tos = tos,
+	};
+	return ip_route_output_key(net, &fl4);
+}
+
+static inline struct rtable *ip_route_output_ports(struct net *net, struct flowi4 *fl4,
+						   struct sock *sk,
+						   __be32 daddr, __be32 saddr,
+						   __be16 dport, __be16 sport,
+						   __u8 proto, __u8 tos, int oif)
+{
+	flowi4_init_output(fl4, oif, sk ? sk->sk_mark : 0, tos,
+			   RT_SCOPE_UNIVERSE, proto,
+			   sk ? inet_sk_flowi_flags(sk) : 0,
+			   daddr, saddr, dport, sport);
+	if (sk)
+		security_sk_classify_flow(sk, flowi4_to_flowi(fl4));
+	return ip_route_output_flow(net, fl4, sk);
+}
+
+static inline struct rtable *ip_route_output_gre(struct net *net, struct flowi4 *fl4,
+						 __be32 daddr, __be32 saddr,
+						 __be32 gre_key, __u8 tos, int oif)
+{
+	memset(fl4, 0, sizeof(*fl4));
+	fl4->flowi4_oif = oif;
+	fl4->daddr = daddr;
+	fl4->saddr = saddr;
+	fl4->flowi4_tos = tos;
+	fl4->flowi4_proto = IPPROTO_GRE;
+	fl4->fl4_gre_key = gre_key;
+	return ip_route_output_key(net, fl4);
+}
+
+extern int ip_route_input_common(struct sk_buff *skb, __be32 dst, __be32 src,
+				 u8 tos, struct net_device *devin, bool noref);
+
+static inline int ip_route_input(struct sk_buff *skb, __be32 dst, __be32 src,
+				 u8 tos, struct net_device *devin)
+{
+	return ip_route_input_common(skb, dst, src, tos, devin, false);
+}
+
+static inline int ip_route_input_noref(struct sk_buff *skb, __be32 dst, __be32 src,
+				       u8 tos, struct net_device *devin)
+{
+	return ip_route_input_common(skb, dst, src, tos, devin, true);
+}
+
+extern unsigned short	ip_rt_frag_needed(struct net *net, const struct iphdr *iph,
+					  unsigned short new_mtu, struct net_device *dev);
+extern void		ip_rt_send_redirect(struct sk_buff *skb);
+
+extern unsigned		inet_addr_type(struct net *net, __be32 addr);
+extern unsigned		inet_dev_addr_type(struct net *net, const struct net_device *dev, __be32 addr);
+extern void		ip_rt_multicast_event(struct in_device *);
+extern int		ip_rt_ioctl(struct net *, unsigned int cmd, void __user *arg);
+extern void		ip_rt_get_source(u8 *src, struct sk_buff *skb, struct rtable *rt);
+extern int		ip_rt_dump(struct sk_buff *skb,  struct netlink_callback *cb);
+
+struct in_ifaddr;
+extern void fib_add_ifaddr(struct in_ifaddr *);
+extern void fib_del_ifaddr(struct in_ifaddr *, struct in_ifaddr *);
+
+static inline void ip_rt_put(struct rtable * rt)
+{
+	if (rt)
+		dst_release(&rt->dst);
+}
+
+#define IPTOS_RT_MASK	(IPTOS_TOS_MASK & ~3)
+
+extern const __u8 ip_tos2prio[16];
+
+static inline char rt_tos2priority(u8 tos)
+{
+	return ip_tos2prio[IPTOS_TOS(tos)>>1];
+}
+
+/* ip_route_connect() and ip_route_newports() work in tandem whilst
+ * binding a socket for a new outgoing connection.
+ *
+ * In order to use IPSEC properly, we must, in the end, have a
+ * route that was looked up using all available keys including source
+ * and destination ports.
+ *
+ * However, if a source port needs to be allocated (the user specified
+ * a wildcard source port) we need to obtain addressing information
+ * in order to perform that allocation.
+ *
+ * So ip_route_connect() looks up a route using wildcarded source and
+ * destination ports in the key, simply so that we can get a pair of
+ * addresses to use for port allocation.
+ *
+ * Later, once the ports are allocated, ip_route_newports() will make
+ * another route lookup if needed to make sure we catch any IPSEC
+ * rules keyed on the port information.
+ *
+ * The callers allocate the flow key on their stack, and must pass in
+ * the same flowi4 object to both the ip_route_connect() and the
+ * ip_route_newports() calls.
+ */
+
+static inline void ip_route_connect_init(struct flowi4 *fl4, __be32 dst, __be32 src,
+					 u32 tos, int oif, u8 protocol,
+					 __be16 sport, __be16 dport,
+					 struct sock *sk, bool can_sleep)
+{
+	__u8 flow_flags = 0;
+
+	if (inet_sk(sk)->transparent)
+		flow_flags |= FLOWI_FLAG_ANYSRC;
+	if (protocol == IPPROTO_TCP)
+		flow_flags |= FLOWI_FLAG_PRECOW_METRICS;
+	if (can_sleep)
+		flow_flags |= FLOWI_FLAG_CAN_SLEEP;
+
+	flowi4_init_output(fl4, oif, sk->sk_mark, tos, RT_SCOPE_UNIVERSE,
+			   protocol, flow_flags, dst, src, dport, sport);
+}
+
+static inline struct rtable *ip_route_connect(struct flowi4 *fl4,
+					      __be32 dst, __be32 src, u32 tos,
+					      int oif, u8 protocol,
+					      __be16 sport, __be16 dport,
+					      struct sock *sk, bool can_sleep)
+{
+	struct net *net = sock_net(sk);
+	struct rtable *rt;
+
+	ip_route_connect_init(fl4, dst, src, tos, oif, protocol,
+			      sport, dport, sk, can_sleep);
+
+	if (!dst || !src) {
+		rt = __ip_route_output_key(net, fl4);
+		if (IS_ERR(rt))
+			return rt;
+		ip_rt_put(rt);
+		flowi4_update_output(fl4, oif, tos, fl4->daddr, fl4->saddr);
+	}
+	security_sk_classify_flow(sk, flowi4_to_flowi(fl4));
+	return ip_route_output_flow(net, fl4, sk);
+}
+
+static inline struct rtable *ip_route_newports(struct flowi4 *fl4, struct rtable *rt,
+					       __be16 orig_sport, __be16 orig_dport,
+					       __be16 sport, __be16 dport,
+					       struct sock *sk)
+{
+	if (sport != orig_sport || dport != orig_dport) {
+		fl4->fl4_dport = dport;
+		fl4->fl4_sport = sport;
+		ip_rt_put(rt);
+		flowi4_update_output(fl4, sk->sk_bound_dev_if,
+				     RT_CONN_FLAGS(sk), fl4->daddr,
+				     fl4->saddr);
+		security_sk_classify_flow(sk, flowi4_to_flowi(fl4));
+		return ip_route_output_flow(sock_net(sk), fl4, sk);
+	}
+	return rt;
+}
+
+extern void rt_bind_peer(struct rtable *rt, __be32 daddr, int create);
+
+static inline struct inet_peer *rt_get_peer(struct rtable *rt, __be32 daddr)
+{
+	if (rt->peer)
+		return rt->peer;
+
+	rt_bind_peer(rt, daddr, 0);
+	return rt->peer;
+}
+
+static inline int inet_iif(const struct sk_buff *skb)
+{
+	return skb_rtable(skb)->rt_iif;
+}
+
+extern int sysctl_ip_default_ttl;
+
+static inline int ip4_dst_hoplimit(const struct dst_entry *dst)
+{
+	int hoplimit = dst_metric_raw(dst, RTAX_HOPLIMIT);
+
+	if (hoplimit == 0)
+		hoplimit = sysctl_ip_default_ttl;
+	return hoplimit;
+}
+
+#endif	/* _ROUTE_H */
diff --git a/include/net/rtnetlink.h b/include/net/rtnetlink.h
new file mode 100644
index 00000000..37029390
--- /dev/null
+++ b/include/net/rtnetlink.h
@@ -0,0 +1,133 @@
+#ifndef __NET_RTNETLINK_H
+#define __NET_RTNETLINK_H
+
+#include <linux/rtnetlink.h>
+#include <net/netlink.h>
+
+typedef int (*rtnl_doit_func)(struct sk_buff *, struct nlmsghdr *, void *);
+typedef int (*rtnl_dumpit_func)(struct sk_buff *, struct netlink_callback *);
+typedef u16 (*rtnl_calcit_func)(struct sk_buff *, struct nlmsghdr *);
+
+extern int	__rtnl_register(int protocol, int msgtype,
+				rtnl_doit_func, rtnl_dumpit_func,
+				rtnl_calcit_func);
+extern void	rtnl_register(int protocol, int msgtype,
+			      rtnl_doit_func, rtnl_dumpit_func,
+			      rtnl_calcit_func);
+extern int	rtnl_unregister(int protocol, int msgtype);
+extern void	rtnl_unregister_all(int protocol);
+
+static inline int rtnl_msg_family(const struct nlmsghdr *nlh)
+{
+	if (nlmsg_len(nlh) >= sizeof(struct rtgenmsg))
+		return ((struct rtgenmsg *) nlmsg_data(nlh))->rtgen_family;
+	else
+		return AF_UNSPEC;
+}
+
+/**
+ *	struct rtnl_link_ops - rtnetlink link operations
+ *
+ *	@list: Used internally
+ *	@kind: Identifier
+ *	@maxtype: Highest device specific netlink attribute number
+ *	@policy: Netlink policy for device specific attribute validation
+ *	@validate: Optional validation function for netlink/changelink parameters
+ *	@priv_size: sizeof net_device private space
+ *	@setup: net_device setup function
+ *	@newlink: Function for configuring and registering a new device
+ *	@changelink: Function for changing parameters of an existing device
+ *	@dellink: Function to remove a device
+ *	@get_size: Function to calculate required room for dumping device
+ *		   specific netlink attributes
+ *	@fill_info: Function to dump device specific netlink attributes
+ *	@get_xstats_size: Function to calculate required room for dumping devic
+ *			  specific statistics
+ *	@fill_xstats: Function to dump device specific statistics
+ */
+struct rtnl_link_ops {
+	struct list_head	list;
+
+	const char		*kind;
+
+	size_t			priv_size;
+	void			(*setup)(struct net_device *dev);
+
+	int			maxtype;
+	const struct nla_policy	*policy;
+	int			(*validate)(struct nlattr *tb[],
+					    struct nlattr *data[]);
+
+	int			(*newlink)(struct net *src_net,
+					   struct net_device *dev,
+					   struct nlattr *tb[],
+					   struct nlattr *data[]);
+	int			(*changelink)(struct net_device *dev,
+					      struct nlattr *tb[],
+					      struct nlattr *data[]);
+	void			(*dellink)(struct net_device *dev,
+					   struct list_head *head);
+
+	size_t			(*get_size)(const struct net_device *dev);
+	int			(*fill_info)(struct sk_buff *skb,
+					     const struct net_device *dev);
+
+	size_t			(*get_xstats_size)(const struct net_device *dev);
+	int			(*fill_xstats)(struct sk_buff *skb,
+					       const struct net_device *dev);
+	int			(*get_tx_queues)(struct net *net, struct nlattr *tb[],
+						 unsigned int *tx_queues,
+						 unsigned int *real_tx_queues);
+};
+
+extern int	__rtnl_link_register(struct rtnl_link_ops *ops);
+extern void	__rtnl_link_unregister(struct rtnl_link_ops *ops);
+
+extern int	rtnl_link_register(struct rtnl_link_ops *ops);
+extern void	rtnl_link_unregister(struct rtnl_link_ops *ops);
+
+/**
+ * 	struct rtnl_af_ops - rtnetlink address family operations
+ *
+ *	@list: Used internally
+ * 	@family: Address family
+ * 	@fill_link_af: Function to fill IFLA_AF_SPEC with address family
+ * 		       specific netlink attributes.
+ * 	@get_link_af_size: Function to calculate size of address family specific
+ * 			   netlink attributes exlusive the container attribute.
+ *	@validate_link_af: Validate a IFLA_AF_SPEC attribute, must check attr
+ *			   for invalid configuration settings.
+ * 	@set_link_af: Function to parse a IFLA_AF_SPEC attribute and modify
+ *		      net_device accordingly.
+ */
+struct rtnl_af_ops {
+	struct list_head	list;
+	int			family;
+
+	int			(*fill_link_af)(struct sk_buff *skb,
+						const struct net_device *dev);
+	size_t			(*get_link_af_size)(const struct net_device *dev);
+
+	int			(*validate_link_af)(const struct net_device *dev,
+						    const struct nlattr *attr);
+	int			(*set_link_af)(struct net_device *dev,
+					       const struct nlattr *attr);
+};
+
+extern int	__rtnl_af_register(struct rtnl_af_ops *ops);
+extern void	__rtnl_af_unregister(struct rtnl_af_ops *ops);
+
+extern int	rtnl_af_register(struct rtnl_af_ops *ops);
+extern void	rtnl_af_unregister(struct rtnl_af_ops *ops);
+
+
+extern struct net *rtnl_link_get_net(struct net *src_net, struct nlattr *tb[]);
+extern struct net_device *rtnl_create_link(struct net *src_net, struct net *net,
+	char *ifname, const struct rtnl_link_ops *ops, struct nlattr *tb[]);
+extern int rtnl_configure_link(struct net_device *dev,
+			       const struct ifinfomsg *ifm);
+extern const struct nla_policy ifla_policy[IFLA_MAX+1];
+
+#define MODULE_ALIAS_RTNL_LINK(kind) MODULE_ALIAS("rtnl-link-" kind)
+
+#endif
diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
new file mode 100644
index 00000000..9d7d54a0
--- /dev/null
+++ b/include/net/sch_generic.h
@@ -0,0 +1,674 @@
+#ifndef __NET_SCHED_GENERIC_H
+#define __NET_SCHED_GENERIC_H
+
+#include <linux/netdevice.h>
+#include <linux/types.h>
+#include <linux/rcupdate.h>
+#include <linux/pkt_sched.h>
+#include <linux/pkt_cls.h>
+#include <net/gen_stats.h>
+#include <net/rtnetlink.h>
+
+struct Qdisc_ops;
+struct qdisc_walker;
+struct tcf_walker;
+struct module;
+
+struct qdisc_rate_table {
+	struct tc_ratespec rate;
+	u32		data[256];
+	struct qdisc_rate_table *next;
+	int		refcnt;
+};
+
+enum qdisc_state_t {
+	__QDISC_STATE_SCHED,
+	__QDISC_STATE_DEACTIVATED,
+	__QDISC_STATE_THROTTLED,
+};
+
+/*
+ * following bits are only changed while qdisc lock is held
+ */
+enum qdisc___state_t {
+	__QDISC___STATE_RUNNING = 1,
+};
+
+struct qdisc_size_table {
+	struct rcu_head		rcu;
+	struct list_head	list;
+	struct tc_sizespec	szopts;
+	int			refcnt;
+	u16			data[];
+};
+
+struct Qdisc {
+	int 			(*enqueue)(struct sk_buff *skb, struct Qdisc *dev);
+	struct sk_buff *	(*dequeue)(struct Qdisc *dev);
+	unsigned int		flags;
+#define TCQ_F_BUILTIN		1
+#define TCQ_F_INGRESS		2
+#define TCQ_F_CAN_BYPASS	4
+#define TCQ_F_MQROOT		8
+#define TCQ_F_WARN_NONWC	(1 << 16)
+	int			padded;
+	const struct Qdisc_ops	*ops;
+	struct qdisc_size_table	__rcu *stab;
+	struct list_head	list;
+	u32			handle;
+	u32			parent;
+	atomic_t		refcnt;
+	struct gnet_stats_rate_est	rate_est;
+	int			(*reshape_fail)(struct sk_buff *skb,
+					struct Qdisc *q);
+
+	void			*u32_node;
+
+	/* This field is deprecated, but it is still used by CBQ
+	 * and it will live until better solution will be invented.
+	 */
+	struct Qdisc		*__parent;
+	struct netdev_queue	*dev_queue;
+	struct Qdisc		*next_sched;
+
+	struct sk_buff		*gso_skb;
+	/*
+	 * For performance sake on SMP, we put highly modified fields at the end
+	 */
+	unsigned long		state;
+	struct sk_buff_head	q;
+	struct gnet_stats_basic_packed bstats;
+	unsigned int		__state;
+	struct gnet_stats_queue	qstats;
+	struct rcu_head		rcu_head;
+	spinlock_t		busylock;
+	u32			limit;
+};
+
+static inline bool qdisc_is_running(const struct Qdisc *qdisc)
+{
+	return (qdisc->__state & __QDISC___STATE_RUNNING) ? true : false;
+}
+
+static inline bool qdisc_run_begin(struct Qdisc *qdisc)
+{
+	if (qdisc_is_running(qdisc))
+		return false;
+	qdisc->__state |= __QDISC___STATE_RUNNING;
+	return true;
+}
+
+static inline void qdisc_run_end(struct Qdisc *qdisc)
+{
+	qdisc->__state &= ~__QDISC___STATE_RUNNING;
+}
+
+static inline bool qdisc_is_throttled(const struct Qdisc *qdisc)
+{
+	return test_bit(__QDISC_STATE_THROTTLED, &qdisc->state) ? true : false;
+}
+
+static inline void qdisc_throttled(struct Qdisc *qdisc)
+{
+	set_bit(__QDISC_STATE_THROTTLED, &qdisc->state);
+}
+
+static inline void qdisc_unthrottled(struct Qdisc *qdisc)
+{
+	clear_bit(__QDISC_STATE_THROTTLED, &qdisc->state);
+}
+
+struct Qdisc_class_ops {
+	/* Child qdisc manipulation */
+	struct netdev_queue *	(*select_queue)(struct Qdisc *, struct tcmsg *);
+	int			(*graft)(struct Qdisc *, unsigned long cl,
+					struct Qdisc *, struct Qdisc **);
+	struct Qdisc *		(*leaf)(struct Qdisc *, unsigned long cl);
+	void			(*qlen_notify)(struct Qdisc *, unsigned long);
+
+	/* Class manipulation routines */
+	unsigned long		(*get)(struct Qdisc *, u32 classid);
+	void			(*put)(struct Qdisc *, unsigned long);
+	int			(*change)(struct Qdisc *, u32, u32,
+					struct nlattr **, unsigned long *);
+	int			(*delete)(struct Qdisc *, unsigned long);
+	void			(*walk)(struct Qdisc *, struct qdisc_walker * arg);
+
+	/* Filter manipulation */
+	struct tcf_proto **	(*tcf_chain)(struct Qdisc *, unsigned long);
+	unsigned long		(*bind_tcf)(struct Qdisc *, unsigned long,
+					u32 classid);
+	void			(*unbind_tcf)(struct Qdisc *, unsigned long);
+
+	/* rtnetlink specific */
+	int			(*dump)(struct Qdisc *, unsigned long,
+					struct sk_buff *skb, struct tcmsg*);
+	int			(*dump_stats)(struct Qdisc *, unsigned long,
+					struct gnet_dump *);
+};
+
+struct Qdisc_ops {
+	struct Qdisc_ops	*next;
+	const struct Qdisc_class_ops	*cl_ops;
+	char			id[IFNAMSIZ];
+	int			priv_size;
+
+	int 			(*enqueue)(struct sk_buff *, struct Qdisc *);
+	struct sk_buff *	(*dequeue)(struct Qdisc *);
+	struct sk_buff *	(*peek)(struct Qdisc *);
+	unsigned int		(*drop)(struct Qdisc *);
+
+	int			(*init)(struct Qdisc *, struct nlattr *arg);
+	void			(*reset)(struct Qdisc *);
+	void			(*destroy)(struct Qdisc *);
+	int			(*change)(struct Qdisc *, struct nlattr *arg);
+	void			(*attach)(struct Qdisc *);
+
+	int			(*dump)(struct Qdisc *, struct sk_buff *);
+	int			(*dump_stats)(struct Qdisc *, struct gnet_dump *);
+
+	struct module		*owner;
+};
+
+
+struct tcf_result {
+	unsigned long	class;
+	u32		classid;
+};
+
+struct tcf_proto_ops {
+	struct tcf_proto_ops	*next;
+	char			kind[IFNAMSIZ];
+
+	int			(*classify)(struct sk_buff *,
+					    const struct tcf_proto *,
+					    struct tcf_result *);
+	int			(*init)(struct tcf_proto*);
+	void			(*destroy)(struct tcf_proto*);
+
+	unsigned long		(*get)(struct tcf_proto*, u32 handle);
+	void			(*put)(struct tcf_proto*, unsigned long);
+	int			(*change)(struct tcf_proto*, unsigned long,
+					u32 handle, struct nlattr **,
+					unsigned long *);
+	int			(*delete)(struct tcf_proto*, unsigned long);
+	void			(*walk)(struct tcf_proto*, struct tcf_walker *arg);
+
+	/* rtnetlink specific */
+	int			(*dump)(struct tcf_proto*, unsigned long,
+					struct sk_buff *skb, struct tcmsg*);
+
+	struct module		*owner;
+};
+
+struct tcf_proto {
+	/* Fast access part */
+	struct tcf_proto	*next;
+	void			*root;
+	int			(*classify)(struct sk_buff *,
+					    const struct tcf_proto *,
+					    struct tcf_result *);
+	__be16			protocol;
+
+	/* All the rest */
+	u32			prio;
+	u32			classid;
+	struct Qdisc		*q;
+	void			*data;
+	const struct tcf_proto_ops	*ops;
+};
+
+struct qdisc_skb_cb {
+	unsigned int		pkt_len;
+	u16			bond_queue_mapping;
+	u16			_pad;
+	unsigned char		data[20];
+};
+
+static inline void qdisc_cb_private_validate(const struct sk_buff *skb, int sz)
+{
+	struct qdisc_skb_cb *qcb;
+
+	BUILD_BUG_ON(sizeof(skb->cb) < offsetof(struct qdisc_skb_cb, data) + sz);
+	BUILD_BUG_ON(sizeof(qcb->data) < sz);
+}
+
+static inline int qdisc_qlen(const struct Qdisc *q)
+{
+	return q->q.qlen;
+}
+
+static inline struct qdisc_skb_cb *qdisc_skb_cb(const struct sk_buff *skb)
+{
+	return (struct qdisc_skb_cb *)skb->cb;
+}
+
+static inline spinlock_t *qdisc_lock(struct Qdisc *qdisc)
+{
+	return &qdisc->q.lock;
+}
+
+static inline struct Qdisc *qdisc_root(const struct Qdisc *qdisc)
+{
+	return qdisc->dev_queue->qdisc;
+}
+
+static inline struct Qdisc *qdisc_root_sleeping(const struct Qdisc *qdisc)
+{
+	return qdisc->dev_queue->qdisc_sleeping;
+}
+
+/* The qdisc root lock is a mechanism by which to top level
+ * of a qdisc tree can be locked from any qdisc node in the
+ * forest.  This allows changing the configuration of some
+ * aspect of the qdisc tree while blocking out asynchronous
+ * qdisc access in the packet processing paths.
+ *
+ * It is only legal to do this when the root will not change
+ * on us.  Otherwise we'll potentially lock the wrong qdisc
+ * root.  This is enforced by holding the RTNL semaphore, which
+ * all users of this lock accessor must do.
+ */
+static inline spinlock_t *qdisc_root_lock(const struct Qdisc *qdisc)
+{
+	struct Qdisc *root = qdisc_root(qdisc);
+
+	ASSERT_RTNL();
+	return qdisc_lock(root);
+}
+
+static inline spinlock_t *qdisc_root_sleeping_lock(const struct Qdisc *qdisc)
+{
+	struct Qdisc *root = qdisc_root_sleeping(qdisc);
+
+	ASSERT_RTNL();
+	return qdisc_lock(root);
+}
+
+static inline struct net_device *qdisc_dev(const struct Qdisc *qdisc)
+{
+	return qdisc->dev_queue->dev;
+}
+
+static inline void sch_tree_lock(const struct Qdisc *q)
+{
+	spin_lock_bh(qdisc_root_sleeping_lock(q));
+}
+
+static inline void sch_tree_unlock(const struct Qdisc *q)
+{
+	spin_unlock_bh(qdisc_root_sleeping_lock(q));
+}
+
+#define tcf_tree_lock(tp)	sch_tree_lock((tp)->q)
+#define tcf_tree_unlock(tp)	sch_tree_unlock((tp)->q)
+
+extern struct Qdisc noop_qdisc;
+extern struct Qdisc_ops noop_qdisc_ops;
+extern struct Qdisc_ops pfifo_fast_ops;
+extern struct Qdisc_ops mq_qdisc_ops;
+
+struct Qdisc_class_common {
+	u32			classid;
+	struct hlist_node	hnode;
+};
+
+struct Qdisc_class_hash {
+	struct hlist_head	*hash;
+	unsigned int		hashsize;
+	unsigned int		hashmask;
+	unsigned int		hashelems;
+};
+
+static inline unsigned int qdisc_class_hash(u32 id, u32 mask)
+{
+	id ^= id >> 8;
+	id ^= id >> 4;
+	return id & mask;
+}
+
+static inline struct Qdisc_class_common *
+qdisc_class_find(const struct Qdisc_class_hash *hash, u32 id)
+{
+	struct Qdisc_class_common *cl;
+	struct hlist_node *n;
+	unsigned int h;
+
+	h = qdisc_class_hash(id, hash->hashmask);
+	hlist_for_each_entry(cl, n, &hash->hash[h], hnode) {
+		if (cl->classid == id)
+			return cl;
+	}
+	return NULL;
+}
+
+extern int qdisc_class_hash_init(struct Qdisc_class_hash *);
+extern void qdisc_class_hash_insert(struct Qdisc_class_hash *, struct Qdisc_class_common *);
+extern void qdisc_class_hash_remove(struct Qdisc_class_hash *, struct Qdisc_class_common *);
+extern void qdisc_class_hash_grow(struct Qdisc *, struct Qdisc_class_hash *);
+extern void qdisc_class_hash_destroy(struct Qdisc_class_hash *);
+
+extern void dev_init_scheduler(struct net_device *dev);
+extern void dev_shutdown(struct net_device *dev);
+extern void dev_activate(struct net_device *dev);
+extern void dev_deactivate(struct net_device *dev);
+extern void dev_deactivate_many(struct list_head *head);
+extern struct Qdisc *dev_graft_qdisc(struct netdev_queue *dev_queue,
+				     struct Qdisc *qdisc);
+extern void qdisc_reset(struct Qdisc *qdisc);
+extern void qdisc_destroy(struct Qdisc *qdisc);
+extern void qdisc_tree_decrease_qlen(struct Qdisc *qdisc, unsigned int n);
+extern struct Qdisc *qdisc_alloc(struct netdev_queue *dev_queue,
+				 struct Qdisc_ops *ops);
+extern struct Qdisc *qdisc_create_dflt(struct netdev_queue *dev_queue,
+				       struct Qdisc_ops *ops, u32 parentid);
+extern void __qdisc_calculate_pkt_len(struct sk_buff *skb,
+				      const struct qdisc_size_table *stab);
+extern void tcf_destroy(struct tcf_proto *tp);
+extern void tcf_destroy_chain(struct tcf_proto **fl);
+
+/* Reset all TX qdiscs greater then index of a device.  */
+static inline void qdisc_reset_all_tx_gt(struct net_device *dev, unsigned int i)
+{
+	struct Qdisc *qdisc;
+
+	for (; i < dev->num_tx_queues; i++) {
+		qdisc = netdev_get_tx_queue(dev, i)->qdisc;
+		if (qdisc) {
+			spin_lock_bh(qdisc_lock(qdisc));
+			qdisc_reset(qdisc);
+			spin_unlock_bh(qdisc_lock(qdisc));
+		}
+	}
+}
+
+static inline void qdisc_reset_all_tx(struct net_device *dev)
+{
+	qdisc_reset_all_tx_gt(dev, 0);
+}
+
+/* Are all TX queues of the device empty?  */
+static inline bool qdisc_all_tx_empty(const struct net_device *dev)
+{
+	unsigned int i;
+	for (i = 0; i < dev->num_tx_queues; i++) {
+		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+		const struct Qdisc *q = txq->qdisc;
+
+		if (q->q.qlen)
+			return false;
+	}
+	return true;
+}
+
+/* Are any of the TX qdiscs changing?  */
+static inline bool qdisc_tx_changing(const struct net_device *dev)
+{
+	unsigned int i;
+	for (i = 0; i < dev->num_tx_queues; i++) {
+		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+		if (txq->qdisc != txq->qdisc_sleeping)
+			return true;
+	}
+	return false;
+}
+
+/* Is the device using the noop qdisc on all queues?  */
+static inline bool qdisc_tx_is_noop(const struct net_device *dev)
+{
+	unsigned int i;
+	for (i = 0; i < dev->num_tx_queues; i++) {
+		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+		if (txq->qdisc != &noop_qdisc)
+			return false;
+	}
+	return true;
+}
+
+static inline unsigned int qdisc_pkt_len(const struct sk_buff *skb)
+{
+	return qdisc_skb_cb(skb)->pkt_len;
+}
+
+/* additional qdisc xmit flags (NET_XMIT_MASK in linux/netdevice.h) */
+enum net_xmit_qdisc_t {
+	__NET_XMIT_STOLEN = 0x00010000,
+	__NET_XMIT_BYPASS = 0x00020000,
+};
+
+#ifdef CONFIG_NET_CLS_ACT
+#define net_xmit_drop_count(e)	((e) & __NET_XMIT_STOLEN ? 0 : 1)
+#else
+#define net_xmit_drop_count(e)	(1)
+#endif
+
+static inline void qdisc_calculate_pkt_len(struct sk_buff *skb,
+					   const struct Qdisc *sch)
+{
+#ifdef CONFIG_NET_SCHED
+	struct qdisc_size_table *stab = rcu_dereference_bh(sch->stab);
+
+	if (stab)
+		__qdisc_calculate_pkt_len(skb, stab);
+#endif
+}
+
+static inline int qdisc_enqueue(struct sk_buff *skb, struct Qdisc *sch)
+{
+	qdisc_calculate_pkt_len(skb, sch);
+	return sch->enqueue(skb, sch);
+}
+
+static inline int qdisc_enqueue_root(struct sk_buff *skb, struct Qdisc *sch)
+{
+	qdisc_skb_cb(skb)->pkt_len = skb->len;
+	return qdisc_enqueue(skb, sch) & NET_XMIT_MASK;
+}
+
+
+static inline void bstats_update(struct gnet_stats_basic_packed *bstats,
+				 const struct sk_buff *skb)
+{
+	bstats->bytes += qdisc_pkt_len(skb);
+	bstats->packets += skb_is_gso(skb) ? skb_shinfo(skb)->gso_segs : 1;
+}
+
+static inline void qdisc_bstats_update(struct Qdisc *sch,
+				       const struct sk_buff *skb)
+{
+	bstats_update(&sch->bstats, skb);
+}
+
+static inline int __qdisc_enqueue_tail(struct sk_buff *skb, struct Qdisc *sch,
+				       struct sk_buff_head *list)
+{
+	__skb_queue_tail(list, skb);
+	sch->qstats.backlog += qdisc_pkt_len(skb);
+
+	return NET_XMIT_SUCCESS;
+}
+
+static inline int qdisc_enqueue_tail(struct sk_buff *skb, struct Qdisc *sch)
+{
+	return __qdisc_enqueue_tail(skb, sch, &sch->q);
+}
+
+static inline struct sk_buff *__qdisc_dequeue_head(struct Qdisc *sch,
+						   struct sk_buff_head *list)
+{
+	struct sk_buff *skb = __skb_dequeue(list);
+
+	if (likely(skb != NULL)) {
+		sch->qstats.backlog -= qdisc_pkt_len(skb);
+		qdisc_bstats_update(sch, skb);
+	}
+
+	return skb;
+}
+
+static inline struct sk_buff *qdisc_dequeue_head(struct Qdisc *sch)
+{
+	return __qdisc_dequeue_head(sch, &sch->q);
+}
+
+static inline unsigned int __qdisc_queue_drop_head(struct Qdisc *sch,
+					      struct sk_buff_head *list)
+{
+	struct sk_buff *skb = __skb_dequeue(list);
+
+	if (likely(skb != NULL)) {
+		unsigned int len = qdisc_pkt_len(skb);
+		sch->qstats.backlog -= len;
+		kfree_skb(skb);
+		return len;
+	}
+
+	return 0;
+}
+
+static inline unsigned int qdisc_queue_drop_head(struct Qdisc *sch)
+{
+	return __qdisc_queue_drop_head(sch, &sch->q);
+}
+
+static inline struct sk_buff *__qdisc_dequeue_tail(struct Qdisc *sch,
+						   struct sk_buff_head *list)
+{
+	struct sk_buff *skb = __skb_dequeue_tail(list);
+
+	if (likely(skb != NULL))
+		sch->qstats.backlog -= qdisc_pkt_len(skb);
+
+	return skb;
+}
+
+static inline struct sk_buff *qdisc_dequeue_tail(struct Qdisc *sch)
+{
+	return __qdisc_dequeue_tail(sch, &sch->q);
+}
+
+static inline struct sk_buff *qdisc_peek_head(struct Qdisc *sch)
+{
+	return skb_peek(&sch->q);
+}
+
+/* generic pseudo peek method for non-work-conserving qdisc */
+static inline struct sk_buff *qdisc_peek_dequeued(struct Qdisc *sch)
+{
+	/* we can reuse ->gso_skb because peek isn't called for root qdiscs */
+	if (!sch->gso_skb) {
+		sch->gso_skb = sch->dequeue(sch);
+		if (sch->gso_skb)
+			/* it's still part of the queue */
+			sch->q.qlen++;
+	}
+
+	return sch->gso_skb;
+}
+
+/* use instead of qdisc->dequeue() for all qdiscs queried with ->peek() */
+static inline struct sk_buff *qdisc_dequeue_peeked(struct Qdisc *sch)
+{
+	struct sk_buff *skb = sch->gso_skb;
+
+	if (skb) {
+		sch->gso_skb = NULL;
+		sch->q.qlen--;
+	} else {
+		skb = sch->dequeue(sch);
+	}
+
+	return skb;
+}
+
+static inline void __qdisc_reset_queue(struct Qdisc *sch,
+				       struct sk_buff_head *list)
+{
+	/*
+	 * We do not know the backlog in bytes of this list, it
+	 * is up to the caller to correct it
+	 */
+	__skb_queue_purge(list);
+}
+
+static inline void qdisc_reset_queue(struct Qdisc *sch)
+{
+	__qdisc_reset_queue(sch, &sch->q);
+	sch->qstats.backlog = 0;
+}
+
+static inline unsigned int __qdisc_queue_drop(struct Qdisc *sch,
+					      struct sk_buff_head *list)
+{
+	struct sk_buff *skb = __qdisc_dequeue_tail(sch, list);
+
+	if (likely(skb != NULL)) {
+		unsigned int len = qdisc_pkt_len(skb);
+		kfree_skb(skb);
+		return len;
+	}
+
+	return 0;
+}
+
+static inline unsigned int qdisc_queue_drop(struct Qdisc *sch)
+{
+	return __qdisc_queue_drop(sch, &sch->q);
+}
+
+static inline int qdisc_drop(struct sk_buff *skb, struct Qdisc *sch)
+{
+	kfree_skb(skb);
+	sch->qstats.drops++;
+
+	return NET_XMIT_DROP;
+}
+
+static inline int qdisc_reshape_fail(struct sk_buff *skb, struct Qdisc *sch)
+{
+	sch->qstats.drops++;
+
+#ifdef CONFIG_NET_CLS_ACT
+	if (sch->reshape_fail == NULL || sch->reshape_fail(skb, sch))
+		goto drop;
+
+	return NET_XMIT_SUCCESS;
+
+drop:
+#endif
+	kfree_skb(skb);
+	return NET_XMIT_DROP;
+}
+
+/* Length to Time (L2T) lookup in a qdisc_rate_table, to determine how
+   long it will take to send a packet given its size.
+ */
+static inline u32 qdisc_l2t(struct qdisc_rate_table* rtab, unsigned int pktlen)
+{
+	int slot = pktlen + rtab->rate.cell_align + rtab->rate.overhead;
+	if (slot < 0)
+		slot = 0;
+	slot >>= rtab->rate.cell_log;
+	if (slot > 255)
+		return rtab->data[255]*(slot >> 8) + rtab->data[slot & 0xFF];
+	return rtab->data[slot];
+}
+
+#ifdef CONFIG_NET_CLS_ACT
+static inline struct sk_buff *skb_act_clone(struct sk_buff *skb, gfp_t gfp_mask,
+					    int action)
+{
+	struct sk_buff *n;
+
+	n = skb_clone(skb, gfp_mask);
+
+	if (n) {
+		n->tc_verd = SET_TC_VERD(n->tc_verd, 0);
+		n->tc_verd = CLR_TC_OK2MUNGE(n->tc_verd);
+		n->tc_verd = CLR_TC_MUNGED(n->tc_verd);
+	}
+	return n;
+}
+#endif
+
+#endif
diff --git a/include/net/scm.h b/include/net/scm.h
new file mode 100644
index 00000000..0c0017ce
--- /dev/null
+++ b/include/net/scm.h
@@ -0,0 +1,131 @@
+#ifndef __LINUX_NET_SCM_H
+#define __LINUX_NET_SCM_H
+
+#include <linux/limits.h>
+#include <linux/net.h>
+#include <linux/security.h>
+#include <linux/pid.h>
+#include <linux/nsproxy.h>
+
+/* Well, we should have at least one descriptor open
+ * to accept passed FDs 8)
+ */
+#define SCM_MAX_FD	253
+
+struct scm_fp_list {
+	struct list_head	list;
+	short			count;
+	short			max;
+	struct file		*fp[SCM_MAX_FD];
+};
+
+struct scm_cookie {
+	struct pid		*pid;		/* Skb credentials */
+	const struct cred	*cred;
+	struct scm_fp_list	*fp;		/* Passed files		*/
+	struct ucred		creds;		/* Skb credentials	*/
+#ifdef CONFIG_SECURITY_NETWORK
+	u32			secid;		/* Passed security ID 	*/
+#endif
+};
+
+extern void scm_detach_fds(struct msghdr *msg, struct scm_cookie *scm);
+extern void scm_detach_fds_compat(struct msghdr *msg, struct scm_cookie *scm);
+extern int __scm_send(struct socket *sock, struct msghdr *msg, struct scm_cookie *scm);
+extern void __scm_destroy(struct scm_cookie *scm);
+extern struct scm_fp_list * scm_fp_dup(struct scm_fp_list *fpl);
+
+#ifdef CONFIG_SECURITY_NETWORK
+static __inline__ void unix_get_peersec_dgram(struct socket *sock, struct scm_cookie *scm)
+{
+	security_socket_getpeersec_dgram(sock, NULL, &scm->secid);
+}
+#else
+static __inline__ void unix_get_peersec_dgram(struct socket *sock, struct scm_cookie *scm)
+{ }
+#endif /* CONFIG_SECURITY_NETWORK */
+
+static __inline__ void scm_set_cred(struct scm_cookie *scm,
+				    struct pid *pid, const struct cred *cred)
+{
+	scm->pid  = get_pid(pid);
+	scm->cred = cred ? get_cred(cred) : NULL;
+	cred_to_ucred(pid, cred, &scm->creds);
+}
+
+static __inline__ void scm_destroy_cred(struct scm_cookie *scm)
+{
+	put_pid(scm->pid);
+	scm->pid  = NULL;
+
+	if (scm->cred)
+		put_cred(scm->cred);
+	scm->cred = NULL;
+}
+
+static __inline__ void scm_destroy(struct scm_cookie *scm)
+{
+	scm_destroy_cred(scm);
+	if (scm && scm->fp)
+		__scm_destroy(scm);
+}
+
+static __inline__ int scm_send(struct socket *sock, struct msghdr *msg,
+			       struct scm_cookie *scm, bool forcecreds)
+{
+	memset(scm, 0, sizeof(*scm));
+	if (forcecreds)
+		scm_set_cred(scm, task_tgid(current), current_cred());
+	unix_get_peersec_dgram(sock, scm);
+	if (msg->msg_controllen <= 0)
+		return 0;
+	return __scm_send(sock, msg, scm);
+}
+
+#ifdef CONFIG_SECURITY_NETWORK
+static inline void scm_passec(struct socket *sock, struct msghdr *msg, struct scm_cookie *scm)
+{
+	char *secdata;
+	u32 seclen;
+	int err;
+
+	if (test_bit(SOCK_PASSSEC, &sock->flags)) {
+		err = security_secid_to_secctx(scm->secid, &secdata, &seclen);
+
+		if (!err) {
+			put_cmsg(msg, SOL_SOCKET, SCM_SECURITY, seclen, secdata);
+			security_release_secctx(secdata, seclen);
+		}
+	}
+}
+#else
+static inline void scm_passec(struct socket *sock, struct msghdr *msg, struct scm_cookie *scm)
+{ }
+#endif /* CONFIG_SECURITY_NETWORK */
+
+static __inline__ void scm_recv(struct socket *sock, struct msghdr *msg,
+				struct scm_cookie *scm, int flags)
+{
+	if (!msg->msg_control) {
+		if (test_bit(SOCK_PASSCRED, &sock->flags) || scm->fp)
+			msg->msg_flags |= MSG_CTRUNC;
+		scm_destroy(scm);
+		return;
+	}
+
+	if (test_bit(SOCK_PASSCRED, &sock->flags))
+		put_cmsg(msg, SOL_SOCKET, SCM_CREDENTIALS, sizeof(scm->creds), &scm->creds);
+
+	scm_destroy_cred(scm);
+
+	scm_passec(sock, msg, scm);
+
+	if (!scm->fp)
+		return;
+	
+	scm_detach_fds(msg, scm);
+}
+
+
+#endif /* __LINUX_NET_SCM_H */
+
diff --git a/include/net/sctp/auth.h b/include/net/sctp/auth.h
new file mode 100644
index 00000000..49bc9577
--- /dev/null
+++ b/include/net/sctp/auth.h
@@ -0,0 +1,127 @@
+/* SCTP kernel implementation
+ * (C) Copyright 2007 Hewlett-Packard Development Company, L.P.
+ *
+ * This file is part of the SCTP kernel implementation
+ *
+ * This SCTP implementation is free software;
+ * you can redistribute it and/or modify it under the terms of
+ * the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This SCTP implementation is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ *                 ************************
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with GNU CC; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ * Please send any bug reports or fixes you make to the
+ * email address(es):
+ *    lksctp developers <lksctp-developers@lists.sourceforge.net>
+ *
+ * Or submit a bug report through the following website:
+ *    http://www.sf.net/projects/lksctp
+ *
+ * Written or modified by:
+ *   Vlad Yasevich     <vladislav.yasevich@hp.com>
+ *
+ * Any bugs reported given to us we will try to fix... any fixes shared will
+ * be incorporated into the next SCTP release.
+ */
+
+#ifndef __sctp_auth_h__
+#define __sctp_auth_h__
+
+#include <linux/list.h>
+#include <linux/crypto.h>
+
+struct sctp_endpoint;
+struct sctp_association;
+struct sctp_authkey;
+struct sctp_hmacalgo;
+
+/*
+ * Define a generic struct that will hold all the info
+ * necessary for an HMAC transform
+ */
+struct sctp_hmac {
+	__u16 hmac_id;		/* one of the above ids */
+	char *hmac_name;	/* name for loading */
+	__u16 hmac_len;		/* length of the signature */
+};
+
+/* This is generic structure that containst authentication bytes used
+ * as keying material.  It's a what is referred to as byte-vector all
+ * over SCTP-AUTH
+ */
+struct sctp_auth_bytes {
+	atomic_t refcnt;
+	__u32 len;
+	__u8  data[];
+};
+
+/* Definition for a shared key, weather endpoint or association */
+struct sctp_shared_key {
+	struct list_head key_list;
+	__u16 key_id;
+	struct sctp_auth_bytes *key;
+};
+
+#define key_for_each(__key, __list_head) \
+	list_for_each_entry(__key, __list_head, key_list)
+
+#define key_for_each_safe(__key, __tmp, __list_head) \
+	list_for_each_entry_safe(__key, __tmp, __list_head, key_list)
+
+static inline void sctp_auth_key_hold(struct sctp_auth_bytes *key)
+{
+	if (!key)
+		return;
+
+	atomic_inc(&key->refcnt);
+}
+
+void sctp_auth_key_put(struct sctp_auth_bytes *key);
+struct sctp_shared_key *sctp_auth_shkey_create(__u16 key_id, gfp_t gfp);
+void sctp_auth_destroy_keys(struct list_head *keys);
+int sctp_auth_asoc_init_active_key(struct sctp_association *asoc, gfp_t gfp);
+struct sctp_shared_key *sctp_auth_get_shkey(
+				const struct sctp_association *asoc,
+				__u16 key_id);
+int sctp_auth_asoc_copy_shkeys(const struct sctp_endpoint *ep,
+				struct sctp_association *asoc,
+				gfp_t gfp);
+int sctp_auth_init_hmacs(struct sctp_endpoint *ep, gfp_t gfp);
+void sctp_auth_destroy_hmacs(struct crypto_hash *auth_hmacs[]);
+struct sctp_hmac *sctp_auth_get_hmac(__u16 hmac_id);
+struct sctp_hmac *sctp_auth_asoc_get_hmac(const struct sctp_association *asoc);
+void sctp_auth_asoc_set_default_hmac(struct sctp_association *asoc,
+				     struct sctp_hmac_algo_param *hmacs);
+int sctp_auth_asoc_verify_hmac_id(const struct sctp_association *asoc,
+				    __be16 hmac_id);
+int sctp_auth_send_cid(sctp_cid_t chunk, const struct sctp_association *asoc);
+int sctp_auth_recv_cid(sctp_cid_t chunk, const struct sctp_association *asoc);
+void sctp_auth_calculate_hmac(const struct sctp_association *asoc,
+			    struct sk_buff *skb,
+			    struct sctp_auth_chunk *auth, gfp_t gfp);
+
+/* API Helpers */
+int sctp_auth_ep_add_chunkid(struct sctp_endpoint *ep, __u8 chunk_id);
+int sctp_auth_ep_set_hmacs(struct sctp_endpoint *ep,
+			    struct sctp_hmacalgo *hmacs);
+int sctp_auth_set_key(struct sctp_endpoint *ep,
+		      struct sctp_association *asoc,
+		      struct sctp_authkey *auth_key);
+int sctp_auth_set_active_key(struct sctp_endpoint *ep,
+		      struct sctp_association *asoc,
+		      __u16 key_id);
+int sctp_auth_del_key_id(struct sctp_endpoint *ep,
+		      struct sctp_association *asoc,
+		      __u16 key_id);
+
+#endif
diff --git a/include/net/sctp/checksum.h b/include/net/sctp/checksum.h
new file mode 100644
index 00000000..befc8d2a
--- /dev/null
+++ b/include/net/sctp/checksum.h
@@ -0,0 +1,83 @@
+/* SCTP kernel reference Implementation
+ * Copyright (c) 1999-2001 Motorola, Inc.
+ * Copyright (c) 2001-2003 International Business Machines, Corp.
+ *
+ * This file is part of the SCTP kernel reference Implementation
+ *
+ * SCTP Checksum functions
+ *
+ * The SCTP reference implementation is free software;
+ * you can redistribute it and/or modify it under the terms of
+ * the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * The SCTP reference implementation is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ *                 ************************
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with GNU CC; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ * Please send any bug reports or fixes you make to the
+ * email address(es):
+ *    lksctp developers <lksctp-developers@lists.sourceforge.net>
+ *
+ * Or submit a bug report through the following website:
+ *    http://www.sf.net/projects/lksctp
+ *
+ * Written or modified by:
+ *    Dinakaran Joseph
+ *    Jon Grimm <jgrimm@us.ibm.com>
+ *    Sridhar Samudrala <sri@us.ibm.com>
+ *
+ * Rewritten to use libcrc32c by:
+ *    Vlad Yasevich <vladislav.yasevich@hp.com>
+ *
+ * Any bugs reported given to us we will try to fix... any fixes shared will
+ * be incorporated into the next SCTP release.
+ */
+
+#include <linux/types.h>
+#include <net/sctp/sctp.h>
+#include <linux/crc32c.h>
+
+static inline __u32 sctp_crc32c(__u32 crc, u8 *buffer, u16 length)
+{
+	return crc32c(crc, buffer, length);
+}
+
+static inline __u32 sctp_start_cksum(__u8 *buffer, __u16 length)
+{
+	__u32 crc = ~(__u32)0;
+	__u8  zero[sizeof(__u32)] = {0};
+
+	/* Optimize this routine to be SCTP specific, knowing how
+	 * to skip the checksum field of the SCTP header.
+	 */
+
+	/* Calculate CRC up to the checksum. */
+	crc = sctp_crc32c(crc, buffer, sizeof(struct sctphdr) - sizeof(__u32));
+
+	/* Skip checksum field of the header. */
+	crc = sctp_crc32c(crc, zero, sizeof(__u32));
+
+	/* Calculate the rest of the CRC. */
+	crc = sctp_crc32c(crc, &buffer[sizeof(struct sctphdr)],
+			    length - sizeof(struct sctphdr));
+	return crc;
+}
+
+static inline __u32 sctp_update_cksum(__u8 *buffer, __u16 length, __u32 crc32)
+{
+	return sctp_crc32c(crc32, buffer, length);
+}
+
+static inline __le32 sctp_end_cksum(__be32 crc32)
+{
+	return cpu_to_le32(~crc32);
+}
diff --git a/include/net/sctp/command.h b/include/net/sctp/command.h
new file mode 100644
index 00000000..712b3beb
--- /dev/null
+++ b/include/net/sctp/command.h
@@ -0,0 +1,225 @@
+/* SCTP kernel Implementation
+ * (C) Copyright IBM Corp. 2001, 2004
+ * Copyright (C) 1999-2001 Cisco, Motorola
+ *
+ * This file is part of the SCTP kernel implementation
+ *
+ * These are the definitions needed for the command object.
+ *
+ * This SCTP implementation  is free software;
+ * you can redistribute it and/or modify it under the terms of
+ * the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This SCTP implementation  is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ *                 ************************
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with GNU CC; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ * Please send any bug reports or fixes you make to one of the
+ * following email addresses:
+ *
+ * La Monte H.P. Yarroll <piggy@acm.org>
+ * Karl Knutson <karl@athena.chicago.il.us>
+ * Ardelle Fan <ardelle.fan@intel.com>
+ * Sridhar Samudrala <sri@us.ibm.com>
+ *
+ * Any bugs reported given to us we will try to fix... any fixes shared will
+ * be incorporated into the next SCTP release.
+ */
+
+
+#ifndef __net_sctp_command_h__
+#define __net_sctp_command_h__
+
+#include <net/sctp/constants.h>
+#include <net/sctp/structs.h>
+
+
+typedef enum {
+	SCTP_CMD_NOP = 0,	/* Do nothing. */
+	SCTP_CMD_NEW_ASOC,	/* Register a new association.  */
+	SCTP_CMD_DELETE_TCB,	/* Delete the current association. */
+	SCTP_CMD_NEW_STATE,	/* Enter a new state.  */
+	SCTP_CMD_REPORT_TSN,	/* Record the arrival of a TSN.  */
+	SCTP_CMD_GEN_SACK,	/* Send a Selective ACK (maybe).  */
+	SCTP_CMD_PROCESS_SACK,	/* Process an inbound SACK.  */
+	SCTP_CMD_GEN_INIT_ACK,	/* Generate an INIT ACK chunk.  */
+	SCTP_CMD_PEER_INIT,	/* Process a INIT from the peer.  */
+	SCTP_CMD_GEN_COOKIE_ECHO, /* Generate a COOKIE ECHO chunk. */
+	SCTP_CMD_CHUNK_ULP,	/* Send a chunk to the sockets layer.  */
+	SCTP_CMD_EVENT_ULP,	/* Send a notification to the sockets layer. */
+	SCTP_CMD_REPLY,		/* Send a chunk to our peer.  */
+	SCTP_CMD_SEND_PKT,	/* Send a full packet to our peer.  */
+	SCTP_CMD_RETRAN,	/* Mark a transport for retransmission.  */
+	SCTP_CMD_ECN_CE,        /* Do delayed CE processing.   */
+	SCTP_CMD_ECN_ECNE,	/* Do delayed ECNE processing. */
+	SCTP_CMD_ECN_CWR,	/* Do delayed CWR processing.  */
+	SCTP_CMD_TIMER_START,	/* Start a timer.  */
+	SCTP_CMD_TIMER_START_ONCE, /* Start a timer once */
+	SCTP_CMD_TIMER_RESTART,	/* Restart a timer. */
+	SCTP_CMD_TIMER_STOP,	/* Stop a timer. */
+	SCTP_CMD_INIT_CHOOSE_TRANSPORT, /* Choose transport for an INIT. */
+	SCTP_CMD_INIT_COUNTER_RESET, /* Reset init counter. */
+	SCTP_CMD_INIT_COUNTER_INC,   /* Increment init counter. */
+	SCTP_CMD_INIT_RESTART,  /* High level, do init timer work. */
+	SCTP_CMD_COOKIEECHO_RESTART,  /* High level, do cookie-echo timer work. */
+	SCTP_CMD_INIT_FAILED,   /* High level, do init failure work. */
+	SCTP_CMD_REPORT_DUP,	/* Report a duplicate TSN.  */
+	SCTP_CMD_STRIKE,	/* Mark a strike against a transport.  */
+	SCTP_CMD_HB_TIMERS_START,    /* Start the heartbeat timers. */
+	SCTP_CMD_HB_TIMER_UPDATE,    /* Update a heartbeat timers.  */
+	SCTP_CMD_HB_TIMERS_STOP,     /* Stop the heartbeat timers.  */
+	SCTP_CMD_TRANSPORT_HB_SENT,  /* Reset the status of a transport. */
+	SCTP_CMD_TRANSPORT_IDLE,     /* Do manipulations on idle transport */
+	SCTP_CMD_TRANSPORT_ON,       /* Mark the transport as active. */
+	SCTP_CMD_REPORT_ERROR,   /* Pass this error back out of the sm. */
+	SCTP_CMD_REPORT_BAD_TAG, /* Verification tags didn't match. */
+	SCTP_CMD_PROCESS_CTSN,   /* Sideeffect from shutdown. */
+	SCTP_CMD_ASSOC_FAILED,	 /* Handle association failure. */
+	SCTP_CMD_DISCARD_PACKET, /* Discard the whole packet. */
+	SCTP_CMD_GEN_SHUTDOWN,   /* Generate a SHUTDOWN chunk. */
+	SCTP_CMD_UPDATE_ASSOC,   /* Update association information. */
+	SCTP_CMD_PURGE_OUTQUEUE, /* Purge all data waiting to be sent. */
+	SCTP_CMD_SETUP_T2,       /* Hi-level, setup T2-shutdown parms.  */
+	SCTP_CMD_RTO_PENDING,	 /* Set transport's rto_pending. */
+	SCTP_CMD_PART_DELIVER,	 /* Partial data delivery considerations. */
+	SCTP_CMD_RENEGE,         /* Renege data on an association. */
+	SCTP_CMD_SETUP_T4,	 /* ADDIP, setup T4 RTO timer parms. */
+	SCTP_CMD_PROCESS_OPERR,  /* Process an ERROR chunk. */
+	SCTP_CMD_REPORT_FWDTSN,	 /* Report new cumulative TSN Ack. */
+	SCTP_CMD_PROCESS_FWDTSN, /* Skips were reported, so process further. */
+	SCTP_CMD_CLEAR_INIT_TAG, /* Clears association peer's inittag. */
+	SCTP_CMD_DEL_NON_PRIMARY, /* Removes non-primary peer transports. */
+	SCTP_CMD_T3_RTX_TIMERS_STOP, /* Stops T3-rtx pending timers */
+	SCTP_CMD_FORCE_PRIM_RETRAN,  /* Forces retrans. over primary path. */
+	SCTP_CMD_SET_SK_ERR,	 /* Set sk_err */
+	SCTP_CMD_ASSOC_CHANGE,	 /* generate and send assoc_change event */
+	SCTP_CMD_ADAPTATION_IND, /* generate and send adaptation event */
+	SCTP_CMD_ASSOC_SHKEY,    /* generate the association shared keys */
+	SCTP_CMD_T1_RETRAN,	 /* Mark for retransmission after T1 timeout  */
+	SCTP_CMD_UPDATE_INITTAG, /* Update peer inittag */
+	SCTP_CMD_SEND_MSG,	 /* Send the whole use message */
+	SCTP_CMD_SEND_NEXT_ASCONF, /* Send the next ASCONF after ACK */
+	SCTP_CMD_PURGE_ASCONF_QUEUE, /* Purge all asconf queues.*/
+	SCTP_CMD_SET_ASOC,	 /* Restore association context */
+	SCTP_CMD_LAST
+} sctp_verb_t;
+
+/* How many commands can you put in an sctp_cmd_seq_t?
+ * This is a rather arbitrary number, ideally derived from a careful
+ * analysis of the state functions, but in reality just taken from
+ * thin air in the hopes othat we don't trigger a kernel panic.
+ */
+#define SCTP_MAX_NUM_COMMANDS 14
+
+typedef union {
+	__s32 i32;
+	__u32 u32;
+	__be32 be32;
+	__u16 u16;
+	__u8 u8;
+	int error;
+	__be16 err;
+	sctp_state_t state;
+	sctp_event_timeout_t to;
+	unsigned long zero;
+	void *ptr;
+	struct sctp_chunk *chunk;
+	struct sctp_association *asoc;
+	struct sctp_transport *transport;
+	struct sctp_bind_addr *bp;
+	sctp_init_chunk_t *init;
+	struct sctp_ulpevent *ulpevent;
+	struct sctp_packet *packet;
+	sctp_sackhdr_t *sackh;
+	struct sctp_datamsg *msg;
+} sctp_arg_t;
+
+/* We are simulating ML type constructors here.
+ *
+ * SCTP_ARG_CONSTRUCTOR(NAME, TYPE, ELT) builds a function called
+ * SCTP_NAME() which takes an argument of type TYPE and returns an
+ * sctp_arg_t.  It does this by inserting the sole argument into the
+ * ELT union element of a local sctp_arg_t.
+ *
+ * E.g., SCTP_ARG_CONSTRUCTOR(I32, __s32, i32) builds SCTP_I32(arg),
+ * which takes an __s32 and returns a sctp_arg_t containing the
+ * __s32.  So, after foo = SCTP_I32(arg), foo.i32 == arg.
+ */
+static inline sctp_arg_t SCTP_NULL(void)
+{
+	sctp_arg_t retval; retval.ptr = NULL; return retval;
+}
+static inline sctp_arg_t SCTP_NOFORCE(void)
+{
+	sctp_arg_t retval = {.zero = 0UL}; retval.i32 = 0; return retval;
+}
+static inline sctp_arg_t SCTP_FORCE(void)
+{
+	sctp_arg_t retval = {.zero = 0UL}; retval.i32 = 1; return retval;
+}
+
+#define SCTP_ARG_CONSTRUCTOR(name, type, elt) \
+static inline sctp_arg_t	\
+SCTP_## name (type arg)		\
+{ sctp_arg_t retval = {.zero = 0UL}; retval.elt = arg; return retval; }
+
+SCTP_ARG_CONSTRUCTOR(I32,	__s32, i32)
+SCTP_ARG_CONSTRUCTOR(U32,	__u32, u32)
+SCTP_ARG_CONSTRUCTOR(BE32,	__be32, be32)
+SCTP_ARG_CONSTRUCTOR(U16,	__u16, u16)
+SCTP_ARG_CONSTRUCTOR(U8,	__u8, u8)
+SCTP_ARG_CONSTRUCTOR(ERROR,     int, error)
+SCTP_ARG_CONSTRUCTOR(PERR,      __be16, err)	/* protocol error */
+SCTP_ARG_CONSTRUCTOR(STATE,	sctp_state_t, state)
+SCTP_ARG_CONSTRUCTOR(TO,	sctp_event_timeout_t, to)
+SCTP_ARG_CONSTRUCTOR(PTR,	void *, ptr)
+SCTP_ARG_CONSTRUCTOR(CHUNK,	struct sctp_chunk *, chunk)
+SCTP_ARG_CONSTRUCTOR(ASOC,	struct sctp_association *, asoc)
+SCTP_ARG_CONSTRUCTOR(TRANSPORT,	struct sctp_transport *, transport)
+SCTP_ARG_CONSTRUCTOR(BA,	struct sctp_bind_addr *, bp)
+SCTP_ARG_CONSTRUCTOR(PEER_INIT,	sctp_init_chunk_t *, init)
+SCTP_ARG_CONSTRUCTOR(ULPEVENT,  struct sctp_ulpevent *, ulpevent)
+SCTP_ARG_CONSTRUCTOR(PACKET,	struct sctp_packet *, packet)
+SCTP_ARG_CONSTRUCTOR(SACKH,	sctp_sackhdr_t *, sackh)
+SCTP_ARG_CONSTRUCTOR(DATAMSG,	struct sctp_datamsg *, msg)
+
+typedef struct {
+	sctp_arg_t obj;
+	sctp_verb_t verb;
+} sctp_cmd_t;
+
+typedef struct {
+	sctp_cmd_t cmds[SCTP_MAX_NUM_COMMANDS];
+	__u8 next_free_slot;
+	__u8 next_cmd;
+} sctp_cmd_seq_t;
+
+
+/* Initialize a block of memory as a command sequence.
+ * Return 0 if the initialization fails.
+ */
+int sctp_init_cmd_seq(sctp_cmd_seq_t *seq);
+
+/* Add a command to an sctp_cmd_seq_t.
+ *
+ * Use the SCTP_* constructors defined by SCTP_ARG_CONSTRUCTOR() above
+ * to wrap data which goes in the obj argument.
+ */
+void sctp_add_cmd_sf(sctp_cmd_seq_t *seq, sctp_verb_t verb, sctp_arg_t obj);
+
+/* Return the next command structure in an sctp_cmd_seq.
+ * Return NULL at the end of the sequence.
+ */
+sctp_cmd_t *sctp_next_cmd(sctp_cmd_seq_t *seq);
+
+#endif /* __net_sctp_command_h__ */
+
diff --git a/include/net/sctp/constants.h b/include/net/sctp/constants.h
new file mode 100644
index 00000000..942b864f
--- /dev/null
+++ b/include/net/sctp/constants.h
@@ -0,0 +1,442 @@
+/* SCTP kernel implementation
+ * (C) Copyright IBM Corp. 2001, 2004
+ * Copyright (c) 1999-2000 Cisco, Inc.
+ * Copyright (c) 1999-2001 Motorola, Inc.
+ * Copyright (c) 2001 Intel Corp.
+ *
+ * This file is part of the SCTP kernel implementation
+ *
+ * This SCTP implementation is free software;
+ * you can redistribute it and/or modify it under the terms of
+ * the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This SCTP implementation is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ *                 ************************
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with GNU CC; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ * Please send any bug reports or fixes you make to the
+ * email address(es):
+ *    lksctp developers <lksctp-developers@lists.sourceforge.net>
+ *
+ * Or submit a bug report through the following website:
+ *    http://www.sf.net/projects/lksctp
+ *
+ * Written or modified by:
+ *   La Monte H.P. Yarroll <piggy@acm.org>
+ *   Karl Knutson          <karl@athena.chicago.il.us>
+ *   Randall Stewart       <randall@stewart.chicago.il.us>
+ *   Ken Morneau           <kmorneau@cisco.com>
+ *   Qiaobing Xie          <qxie1@motorola.com>
+ *   Xingang Guo           <xingang.guo@intel.com>
+ *   Sridhar Samudrala     <samudrala@us.ibm.com>
+ *   Daisy Chang           <daisyc@us.ibm.com>
+ *
+ * Any bugs reported given to us we will try to fix... any fixes shared will
+ * be incorporated into the next SCTP release.
+ */
+
+#ifndef __sctp_constants_h__
+#define __sctp_constants_h__
+
+#include <linux/sctp.h>
+#include <linux/ipv6.h> /* For ipv6hdr. */
+#include <net/sctp/user.h>
+#include <net/tcp_states.h>  /* For TCP states used in sctp_sock_state_t */
+
+/* Value used for stream negotiation. */
+enum { SCTP_MAX_STREAM = 0xffff };
+enum { SCTP_DEFAULT_OUTSTREAMS = 10 };
+enum { SCTP_DEFAULT_INSTREAMS = SCTP_MAX_STREAM };
+
+/* Since CIDs are sparse, we need all four of the following
+ * symbols.  CIDs are dense through SCTP_CID_BASE_MAX.
+ */
+#define SCTP_CID_BASE_MAX		SCTP_CID_SHUTDOWN_COMPLETE
+
+#define SCTP_NUM_BASE_CHUNK_TYPES	(SCTP_CID_BASE_MAX + 1)
+
+#define SCTP_NUM_ADDIP_CHUNK_TYPES	2
+
+#define SCTP_NUM_PRSCTP_CHUNK_TYPES	1
+
+#define SCTP_NUM_AUTH_CHUNK_TYPES	1
+
+#define SCTP_NUM_CHUNK_TYPES		(SCTP_NUM_BASE_CHUNK_TYPES + \
+					 SCTP_NUM_ADDIP_CHUNK_TYPES +\
+					 SCTP_NUM_PRSCTP_CHUNK_TYPES +\
+					 SCTP_NUM_AUTH_CHUNK_TYPES)
+
+/* These are the different flavours of event.  */
+typedef enum {
+
+	SCTP_EVENT_T_CHUNK = 1,
+	SCTP_EVENT_T_TIMEOUT,
+	SCTP_EVENT_T_OTHER,
+	SCTP_EVENT_T_PRIMITIVE
+
+} sctp_event_t;
+
+/* As a convenience for the state machine, we append SCTP_EVENT_* and
+ * SCTP_ULP_* to the list of possible chunks.
+ */
+
+typedef enum {
+	SCTP_EVENT_TIMEOUT_NONE = 0,
+	SCTP_EVENT_TIMEOUT_T1_COOKIE,
+	SCTP_EVENT_TIMEOUT_T1_INIT,
+	SCTP_EVENT_TIMEOUT_T2_SHUTDOWN,
+	SCTP_EVENT_TIMEOUT_T3_RTX,
+	SCTP_EVENT_TIMEOUT_T4_RTO,
+	SCTP_EVENT_TIMEOUT_T5_SHUTDOWN_GUARD,
+	SCTP_EVENT_TIMEOUT_HEARTBEAT,
+	SCTP_EVENT_TIMEOUT_SACK,
+	SCTP_EVENT_TIMEOUT_AUTOCLOSE,
+} sctp_event_timeout_t;
+
+#define SCTP_EVENT_TIMEOUT_MAX		SCTP_EVENT_TIMEOUT_AUTOCLOSE
+#define SCTP_NUM_TIMEOUT_TYPES		(SCTP_EVENT_TIMEOUT_MAX + 1)
+
+typedef enum {
+	SCTP_EVENT_NO_PENDING_TSN = 0,
+	SCTP_EVENT_ICMP_PROTO_UNREACH,
+} sctp_event_other_t;
+
+#define SCTP_EVENT_OTHER_MAX		SCTP_EVENT_ICMP_PROTO_UNREACH
+#define SCTP_NUM_OTHER_TYPES		(SCTP_EVENT_OTHER_MAX + 1)
+
+/* These are primitive requests from the ULP.  */
+typedef enum {
+	SCTP_PRIMITIVE_ASSOCIATE = 0,
+	SCTP_PRIMITIVE_SHUTDOWN,
+	SCTP_PRIMITIVE_ABORT,
+	SCTP_PRIMITIVE_SEND,
+	SCTP_PRIMITIVE_REQUESTHEARTBEAT,
+	SCTP_PRIMITIVE_ASCONF,
+} sctp_event_primitive_t;
+
+#define SCTP_EVENT_PRIMITIVE_MAX	SCTP_PRIMITIVE_ASCONF
+#define SCTP_NUM_PRIMITIVE_TYPES	(SCTP_EVENT_PRIMITIVE_MAX + 1)
+
+/* We define here a utility type for manipulating subtypes.
+ * The subtype constructors all work like this:
+ *
+ * 	sctp_subtype_t foo = SCTP_ST_CHUNK(SCTP_CID_INIT);
+ */
+
+typedef union {
+	sctp_cid_t chunk;
+	sctp_event_timeout_t timeout;
+	sctp_event_other_t other;
+	sctp_event_primitive_t primitive;
+} sctp_subtype_t;
+
+#define SCTP_SUBTYPE_CONSTRUCTOR(_name, _type, _elt) \
+static inline sctp_subtype_t	\
+SCTP_ST_## _name (_type _arg)		\
+{ sctp_subtype_t _retval; _retval._elt = _arg; return _retval; }
+
+SCTP_SUBTYPE_CONSTRUCTOR(CHUNK,		sctp_cid_t,		chunk)
+SCTP_SUBTYPE_CONSTRUCTOR(TIMEOUT,	sctp_event_timeout_t,	timeout)
+SCTP_SUBTYPE_CONSTRUCTOR(OTHER,		sctp_event_other_t,	other)
+SCTP_SUBTYPE_CONSTRUCTOR(PRIMITIVE,	sctp_event_primitive_t,	primitive)
+
+
+#define sctp_chunk_is_data(a) (a->chunk_hdr->type == SCTP_CID_DATA)
+
+/* Calculate the actual data size in a data chunk */
+#define SCTP_DATA_SNDSIZE(c) ((int)((unsigned long)(c->chunk_end)\
+		       		- (unsigned long)(c->chunk_hdr)\
+				- sizeof(sctp_data_chunk_t)))
+
+/* Internal error codes */
+typedef enum {
+
+	SCTP_IERROR_NO_ERROR	        = 0,
+	SCTP_IERROR_BASE		= 1000,
+	SCTP_IERROR_NO_COOKIE,
+	SCTP_IERROR_BAD_SIG,
+	SCTP_IERROR_STALE_COOKIE,
+	SCTP_IERROR_NOMEM,
+	SCTP_IERROR_MALFORMED,
+	SCTP_IERROR_BAD_TAG,
+	SCTP_IERROR_BIG_GAP,
+	SCTP_IERROR_DUP_TSN,
+	SCTP_IERROR_HIGH_TSN,
+	SCTP_IERROR_IGNORE_TSN,
+	SCTP_IERROR_NO_DATA,
+	SCTP_IERROR_BAD_STREAM,
+	SCTP_IERROR_BAD_PORTS,
+	SCTP_IERROR_AUTH_BAD_HMAC,
+	SCTP_IERROR_AUTH_BAD_KEYID,
+	SCTP_IERROR_PROTO_VIOLATION,
+	SCTP_IERROR_ERROR,
+	SCTP_IERROR_ABORT,
+} sctp_ierror_t;
+
+
+
+/* SCTP state defines for internal state machine */
+typedef enum {
+
+	SCTP_STATE_CLOSED		= 0,
+	SCTP_STATE_COOKIE_WAIT		= 1,
+	SCTP_STATE_COOKIE_ECHOED	= 2,
+	SCTP_STATE_ESTABLISHED		= 3,
+	SCTP_STATE_SHUTDOWN_PENDING	= 4,
+	SCTP_STATE_SHUTDOWN_SENT	= 5,
+	SCTP_STATE_SHUTDOWN_RECEIVED	= 6,
+	SCTP_STATE_SHUTDOWN_ACK_SENT	= 7,
+
+} sctp_state_t;
+
+#define SCTP_STATE_MAX			SCTP_STATE_SHUTDOWN_ACK_SENT
+#define SCTP_STATE_NUM_STATES		(SCTP_STATE_MAX + 1)
+
+/* These are values for sk->state.
+ * For a UDP-style SCTP socket, the states are defined as follows
+ * - A socket in SCTP_SS_CLOSED state indicates that it is not willing to
+ *   accept new associations, but it can initiate the creation of new ones.
+ * - A socket in SCTP_SS_LISTENING state indicates that it is willing to
+ *   accept new  associations and can initiate the creation of new ones.
+ * - A socket in SCTP_SS_ESTABLISHED state indicates that it is a peeled off
+ *   socket with one association.
+ * For a TCP-style SCTP socket, the states are defined as follows
+ * - A socket in SCTP_SS_CLOSED state indicates that it is not willing to
+ *   accept new associations, but it can initiate the creation of new ones.
+ * - A socket in SCTP_SS_LISTENING state indicates that it is willing to
+ *   accept new associations, but cannot initiate the creation of new ones.
+ * - A socket in SCTP_SS_ESTABLISHED state indicates that it has a single 
+ *   association.
+ */
+typedef enum {
+	SCTP_SS_CLOSED         = TCP_CLOSE,
+	SCTP_SS_LISTENING      = TCP_LISTEN,
+	SCTP_SS_ESTABLISHING   = TCP_SYN_SENT,
+	SCTP_SS_ESTABLISHED    = TCP_ESTABLISHED,
+	SCTP_SS_CLOSING        = TCP_CLOSING,
+} sctp_sock_state_t;
+
+/* These functions map various type to printable names.  */
+const char *sctp_cname(const sctp_subtype_t);	/* chunk types */
+const char *sctp_oname(const sctp_subtype_t);	/* other events */
+const char *sctp_tname(const sctp_subtype_t);	/* timeouts */
+const char *sctp_pname(const sctp_subtype_t);	/* primitives */
+
+/* This is a table of printable names of sctp_state_t's.  */
+extern const char *const sctp_state_tbl[];
+extern const char *const sctp_evttype_tbl[];
+extern const char *const sctp_status_tbl[];
+
+/* Maximum chunk length considering padding requirements. */
+enum { SCTP_MAX_CHUNK_LEN = ((1<<16) - sizeof(__u32)) };
+
+/* Encourage Cookie-Echo bundling by pre-fragmenting chunks a little
+ * harder (until reaching ESTABLISHED state).
+ */
+enum { SCTP_ARBITRARY_COOKIE_ECHO_LEN = 200 };
+
+/* Guess at how big to make the TSN mapping array.
+ * We guarantee that we can handle at least this big a gap between the
+ * cumulative ACK and the highest TSN.  In practice, we can often
+ * handle up to twice this value.
+ *
+ * NEVER make this more than 32767 (2^15-1).  The Gap Ack Blocks in a
+ * SACK (see  section 3.3.4) are only 16 bits, so 2*SCTP_TSN_MAP_SIZE
+ * must be less than 65535 (2^16 - 1), or we will have overflow
+ * problems creating SACK's.
+ */
+#define SCTP_TSN_MAP_INITIAL BITS_PER_LONG
+#define SCTP_TSN_MAP_INCREMENT SCTP_TSN_MAP_INITIAL
+#define SCTP_TSN_MAP_SIZE 4096
+
+/* We will not record more than this many duplicate TSNs between two
+ * SACKs.  The minimum PMTU is 576.  Remove all the headers and there
+ * is enough room for 131 duplicate reports.  Round down to the
+ * nearest power of 2.
+ */
+enum { SCTP_MIN_PMTU = 576 };
+enum { SCTP_MAX_DUP_TSNS = 16 };
+enum { SCTP_MAX_GABS = 16 };
+
+/* Heartbeat interval - 30 secs */
+#define SCTP_DEFAULT_TIMEOUT_HEARTBEAT	(30*1000)
+
+/* Delayed sack timer - 200ms */
+#define SCTP_DEFAULT_TIMEOUT_SACK	(200)
+
+/* RTO.Initial              - 3  seconds
+ * RTO.Min                  - 1  second
+ * RTO.Max                  - 60 seconds
+ * RTO.Alpha                - 1/8
+ * RTO.Beta                 - 1/4
+ */
+#define SCTP_RTO_INITIAL	(3 * 1000)
+#define SCTP_RTO_MIN		(1 * 1000)
+#define SCTP_RTO_MAX		(60 * 1000)
+
+#define SCTP_RTO_ALPHA          3   /* 1/8 when converted to right shifts. */
+#define SCTP_RTO_BETA           2   /* 1/4 when converted to right shifts. */
+
+/* Maximum number of new data packets that can be sent in a burst.  */
+#define SCTP_DEFAULT_MAX_BURST		4
+
+#define SCTP_CLOCK_GRANULARITY	1	/* 1 jiffy */
+
+#define SCTP_DEFAULT_COOKIE_LIFE	(60 * 1000) /* 60 seconds */
+
+#define SCTP_DEFAULT_MINWINDOW	1500	/* default minimum rwnd size */
+#define SCTP_DEFAULT_MAXWINDOW	65535	/* default rwnd size */
+#define SCTP_DEFAULT_RWND_SHIFT  4	/* by default, update on 1/16 of
+					 * rcvbuf, which is 1/8 of initial
+					 * window
+					 */
+#define SCTP_DEFAULT_MAXSEGMENT 1500	/* MTU size, this is the limit
+                                         * to which we will raise the P-MTU.
+					 */
+#define SCTP_DEFAULT_MINSEGMENT 512	/* MTU size ... if no mtu disc */
+#define SCTP_HOW_MANY_SECRETS 2		/* How many secrets I keep */
+#define SCTP_SECRET_SIZE 32		/* Number of octets in a 256 bits. */
+
+#define SCTP_SIGNATURE_SIZE 20	        /* size of a SLA-1 signature */
+
+#define SCTP_COOKIE_MULTIPLE 32 /* Pad out our cookie to make our hash
+				 * functions simpler to write.
+				 */
+
+#if defined (CONFIG_SCTP_HMAC_MD5)
+#define SCTP_COOKIE_HMAC_ALG "hmac(md5)"
+#elif defined (CONFIG_SCTP_HMAC_SHA1)
+#define SCTP_COOKIE_HMAC_ALG "hmac(sha1)"
+#else
+#define SCTP_COOKIE_HMAC_ALG NULL
+#endif
+
+/* These return values describe the success or failure of a number of
+ * routines which form the lower interface to SCTP_outqueue.
+ */
+typedef enum {
+	SCTP_XMIT_OK,
+	SCTP_XMIT_PMTU_FULL,
+	SCTP_XMIT_RWND_FULL,
+	SCTP_XMIT_NAGLE_DELAY,
+} sctp_xmit_t;
+
+/* These are the commands for manipulating transports.  */
+typedef enum {
+	SCTP_TRANSPORT_UP,
+	SCTP_TRANSPORT_DOWN,
+} sctp_transport_cmd_t;
+
+/* These are the address scopes defined mainly for IPv4 addresses
+ * based on draft of SCTP IPv4 scoping <draft-stewart-tsvwg-sctp-ipv4-00.txt>.
+ * These scopes are hopefully generic enough to be used on scoping both
+ * IPv4 and IPv6 addresses in SCTP.
+ * At this point, the IPv6 scopes will be mapped to these internal scopes
+ * as much as possible.
+ */
+typedef enum {
+	SCTP_SCOPE_GLOBAL,		/* IPv4 global addresses */
+	SCTP_SCOPE_PRIVATE,		/* IPv4 private addresses */
+	SCTP_SCOPE_LINK,		/* IPv4 link local address */
+	SCTP_SCOPE_LOOPBACK,		/* IPv4 loopback address */
+	SCTP_SCOPE_UNUSABLE,		/* IPv4 unusable addresses */
+} sctp_scope_t;
+
+typedef enum {
+	SCTP_SCOPE_POLICY_DISABLE,	/* Disable IPv4 address scoping */
+	SCTP_SCOPE_POLICY_ENABLE,	/* Enable IPv4 address scoping */
+	SCTP_SCOPE_POLICY_PRIVATE,	/* Follow draft but allow IPv4 private addresses */
+	SCTP_SCOPE_POLICY_LINK,		/* Follow draft but allow IPv4 link local addresses */
+} sctp_scope_policy_t;
+
+/* Based on IPv4 scoping <draft-stewart-tsvwg-sctp-ipv4-00.txt>,
+ * SCTP IPv4 unusable addresses: 0.0.0.0/8, 224.0.0.0/4, 198.18.0.0/24,
+ * 192.88.99.0/24.
+ * Also, RFC 8.4, non-unicast addresses are not considered valid SCTP
+ * addresses.
+ */
+#define IS_IPV4_UNUSABLE_ADDRESS(a)	    \
+	((htonl(INADDR_BROADCAST) == a) ||  \
+	 ipv4_is_multicast(a) ||	    \
+	 ipv4_is_zeronet(a) ||		    \
+	 ipv4_is_test_198(a) ||		    \
+	 ipv4_is_anycast_6to4(a))
+
+/* Flags used for the bind address copy functions.  */
+#define SCTP_ADDR6_ALLOWED	0x00000001	/* IPv6 address is allowed by
+						   local sock family */
+#define SCTP_ADDR4_PEERSUPP	0x00000002	/* IPv4 address is supported by
+						   peer */
+#define SCTP_ADDR6_PEERSUPP	0x00000004	/* IPv6 address is supported by
+						   peer */
+
+/* Reasons to retransmit. */
+typedef enum {
+	SCTP_RTXR_T3_RTX,
+	SCTP_RTXR_FAST_RTX,
+	SCTP_RTXR_PMTUD,
+	SCTP_RTXR_T1_RTX,
+} sctp_retransmit_reason_t;
+
+/* Reasons to lower cwnd. */
+typedef enum {
+	SCTP_LOWER_CWND_T3_RTX,
+	SCTP_LOWER_CWND_FAST_RTX,
+	SCTP_LOWER_CWND_ECNE,
+	SCTP_LOWER_CWND_INACTIVE,
+} sctp_lower_cwnd_t;
+
+
+/* SCTP-AUTH Necessary constants */
+
+/* SCTP-AUTH, Section 3.3
+ *
+ *  The following Table 2 shows the currently defined values for HMAC
+ *  identifiers.
+ *
+ *  +-----------------+--------------------------+
+ *  | HMAC Identifier | Message Digest Algorithm |
+ *  +-----------------+--------------------------+
+ *  | 0               | Reserved                 |
+ *  | 1               | SHA-1 defined in [8]     |
+ *  | 2               | Reserved                 |
+ *  | 3               | SHA-256 defined in [8]   |
+ *  +-----------------+--------------------------+
+ */
+enum {
+	SCTP_AUTH_HMAC_ID_RESERVED_0,
+	SCTP_AUTH_HMAC_ID_SHA1,
+	SCTP_AUTH_HMAC_ID_RESERVED_2,
+#if defined (CONFIG_CRYPTO_SHA256) || defined (CONFIG_CRYPTO_SHA256_MODULE)
+	SCTP_AUTH_HMAC_ID_SHA256,
+#endif
+	__SCTP_AUTH_HMAC_MAX
+};
+
+#define SCTP_AUTH_HMAC_ID_MAX	__SCTP_AUTH_HMAC_MAX - 1
+#define SCTP_AUTH_NUM_HMACS 	__SCTP_AUTH_HMAC_MAX
+#define SCTP_SHA1_SIG_SIZE 20
+#define SCTP_SHA256_SIG_SIZE 32
+
+/*  SCTP-AUTH, Section 3.2
+ *     The chunk types for INIT, INIT-ACK, SHUTDOWN-COMPLETE and AUTH chunks
+ *     MUST NOT be listed in the CHUNKS parameter
+ */
+#define SCTP_NUM_NOAUTH_CHUNKS	4
+#define SCTP_AUTH_MAX_CHUNKS	(SCTP_NUM_CHUNK_TYPES - SCTP_NUM_NOAUTH_CHUNKS)
+
+/* SCTP-AUTH Section 6.1
+ * The RANDOM parameter MUST contain a 32 byte random number.
+ */
+#define SCTP_AUTH_RANDOM_LENGTH 32
+
+#endif /* __sctp_constants_h__ */
diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h
new file mode 100644
index 00000000..a2ef8146
--- /dev/null
+++ b/include/net/sctp/sctp.h
@@ -0,0 +1,720 @@
+/* SCTP kernel implementation
+ * (C) Copyright IBM Corp. 2001, 2004
+ * Copyright (c) 1999-2000 Cisco, Inc.
+ * Copyright (c) 1999-2001 Motorola, Inc.
+ * Copyright (c) 2001-2003 Intel Corp.
+ *
+ * This file is part of the SCTP kernel implementation
+ *
+ * The base lksctp header.
+ *
+ * This SCTP implementation is free software;
+ * you can redistribute it and/or modify it under the terms of
+ * the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This SCTP implementation is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ *                 ************************
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with GNU CC; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ * Please send any bug reports or fixes you make to the
+ * email address(es):
+ *    lksctp developers <lksctp-developers@lists.sourceforge.net>
+ *
+ * Or submit a bug report through the following website:
+ *    http://www.sf.net/projects/lksctp
+ *
+ * Written or modified by:
+ *    La Monte H.P. Yarroll <piggy@acm.org>
+ *    Xingang Guo           <xingang.guo@intel.com>
+ *    Jon Grimm             <jgrimm@us.ibm.com>
+ *    Daisy Chang           <daisyc@us.ibm.com>
+ *    Sridhar Samudrala     <sri@us.ibm.com>
+ *    Ardelle Fan           <ardelle.fan@intel.com>
+ *    Ryan Layer            <rmlayer@us.ibm.com>
+ *    Kevin Gao             <kevin.gao@intel.com> 
+ *
+ * Any bugs reported given to us we will try to fix... any fixes shared will
+ * be incorporated into the next SCTP release.
+ */
+
+#ifndef __net_sctp_h__
+#define __net_sctp_h__
+
+/* Header Strategy.
+ *    Start getting some control over the header file depencies:
+ *       includes
+ *       constants
+ *       structs
+ *       prototypes
+ *       macros, externs, and inlines
+ *
+ *   Move test_frame specific items out of the kernel headers
+ *   and into the test frame headers.   This is not perfect in any sense
+ *   and will continue to evolve.
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/in.h>
+#include <linux/tty.h>
+#include <linux/proc_fs.h>
+#include <linux/spinlock.h>
+#include <linux/jiffies.h>
+#include <linux/idr.h>
+
+#if IS_ENABLED(CONFIG_IPV6)
+#include <net/ipv6.h>
+#include <net/ip6_route.h>
+#endif
+
+#include <asm/uaccess.h>
+#include <asm/page.h>
+#include <net/sock.h>
+#include <net/snmp.h>
+#include <net/sctp/structs.h>
+#include <net/sctp/constants.h>
+
+
+/* Set SCTP_DEBUG flag via config if not already set. */
+#ifndef SCTP_DEBUG
+#ifdef CONFIG_SCTP_DBG_MSG
+#define SCTP_DEBUG	1
+#else
+#define SCTP_DEBUG      0
+#endif /* CONFIG_SCTP_DBG */
+#endif /* SCTP_DEBUG */
+
+#ifdef CONFIG_IP_SCTP_MODULE
+#define SCTP_PROTOSW_FLAG 0
+#else /* static! */
+#define SCTP_PROTOSW_FLAG INET_PROTOSW_PERMANENT
+#endif
+
+
+/* Certain internal static functions need to be exported when
+ * compiled into the test frame.
+ */
+#ifndef SCTP_STATIC
+#define SCTP_STATIC static
+#endif
+
+/*
+ * Function declarations.
+ */
+
+/*
+ * sctp/protocol.c
+ */
+extern struct sock *sctp_get_ctl_sock(void);
+extern int sctp_copy_local_addr_list(struct sctp_bind_addr *,
+				     sctp_scope_t, gfp_t gfp,
+				     int flags);
+extern struct sctp_pf *sctp_get_pf_specific(sa_family_t family);
+extern int sctp_register_pf(struct sctp_pf *, sa_family_t);
+extern void sctp_addr_wq_mgmt(struct sctp_sockaddr_entry *, int);
+
+/*
+ * sctp/socket.c
+ */
+int sctp_backlog_rcv(struct sock *sk, struct sk_buff *skb);
+int sctp_inet_listen(struct socket *sock, int backlog);
+void sctp_write_space(struct sock *sk);
+void sctp_data_ready(struct sock *sk, int len);
+unsigned int sctp_poll(struct file *file, struct socket *sock,
+		poll_table *wait);
+void sctp_sock_rfree(struct sk_buff *skb);
+void sctp_copy_sock(struct sock *newsk, struct sock *sk,
+		    struct sctp_association *asoc);
+extern struct percpu_counter sctp_sockets_allocated;
+extern int sctp_asconf_mgmt(struct sctp_sock *, struct sctp_sockaddr_entry *);
+
+/*
+ * sctp/primitive.c
+ */
+int sctp_primitive_ASSOCIATE(struct sctp_association *, void *arg);
+int sctp_primitive_SHUTDOWN(struct sctp_association *, void *arg);
+int sctp_primitive_ABORT(struct sctp_association *, void *arg);
+int sctp_primitive_SEND(struct sctp_association *, void *arg);
+int sctp_primitive_REQUESTHEARTBEAT(struct sctp_association *, void *arg);
+int sctp_primitive_ASCONF(struct sctp_association *, void *arg);
+
+/*
+ * sctp/input.c
+ */
+int sctp_rcv(struct sk_buff *skb);
+void sctp_v4_err(struct sk_buff *skb, u32 info);
+void sctp_hash_established(struct sctp_association *);
+void sctp_unhash_established(struct sctp_association *);
+void sctp_hash_endpoint(struct sctp_endpoint *);
+void sctp_unhash_endpoint(struct sctp_endpoint *);
+struct sock *sctp_err_lookup(int family, struct sk_buff *,
+			     struct sctphdr *, struct sctp_association **,
+			     struct sctp_transport **);
+void sctp_err_finish(struct sock *, struct sctp_association *);
+void sctp_icmp_frag_needed(struct sock *, struct sctp_association *,
+			   struct sctp_transport *t, __u32 pmtu);
+void sctp_icmp_proto_unreachable(struct sock *sk,
+				 struct sctp_association *asoc,
+				 struct sctp_transport *t);
+void sctp_backlog_migrate(struct sctp_association *assoc,
+			  struct sock *oldsk, struct sock *newsk);
+
+/*
+ * sctp/proc.c
+ */
+int sctp_snmp_proc_init(void);
+void sctp_snmp_proc_exit(void);
+int sctp_eps_proc_init(void);
+void sctp_eps_proc_exit(void);
+int sctp_assocs_proc_init(void);
+void sctp_assocs_proc_exit(void);
+int sctp_remaddr_proc_init(void);
+void sctp_remaddr_proc_exit(void);
+
+
+/*
+ * Module global variables
+ */
+
+ /*
+  * sctp/protocol.c
+  */
+extern struct kmem_cache *sctp_chunk_cachep __read_mostly;
+extern struct kmem_cache *sctp_bucket_cachep __read_mostly;
+
+/*
+ *  Section:  Macros, externs, and inlines
+ */
+
+
+#ifdef TEST_FRAME
+#include <test_frame.h>
+#else
+
+/* spin lock wrappers. */
+#define sctp_spin_lock_irqsave(lock, flags) spin_lock_irqsave(lock, flags)
+#define sctp_spin_unlock_irqrestore(lock, flags)  \
+       spin_unlock_irqrestore(lock, flags)
+#define sctp_local_bh_disable() local_bh_disable()
+#define sctp_local_bh_enable()  local_bh_enable()
+#define sctp_spin_lock(lock)    spin_lock(lock)
+#define sctp_spin_unlock(lock)  spin_unlock(lock)
+#define sctp_write_lock(lock)   write_lock(lock)
+#define sctp_write_unlock(lock) write_unlock(lock)
+#define sctp_read_lock(lock)    read_lock(lock)
+#define sctp_read_unlock(lock)  read_unlock(lock)
+
+/* sock lock wrappers. */
+#define sctp_lock_sock(sk)       lock_sock(sk)
+#define sctp_release_sock(sk)    release_sock(sk)
+#define sctp_bh_lock_sock(sk)    bh_lock_sock(sk)
+#define sctp_bh_unlock_sock(sk)  bh_unlock_sock(sk)
+
+/* SCTP SNMP MIB stats handlers */
+DECLARE_SNMP_STAT(struct sctp_mib, sctp_statistics);
+#define SCTP_INC_STATS(field)      SNMP_INC_STATS(sctp_statistics, field)
+#define SCTP_INC_STATS_BH(field)   SNMP_INC_STATS_BH(sctp_statistics, field)
+#define SCTP_INC_STATS_USER(field) SNMP_INC_STATS_USER(sctp_statistics, field)
+#define SCTP_DEC_STATS(field)      SNMP_DEC_STATS(sctp_statistics, field)
+
+#endif /* !TEST_FRAME */
+
+/* sctp mib definitions */
+enum {
+	SCTP_MIB_NUM = 0,
+	SCTP_MIB_CURRESTAB,			/* CurrEstab */
+	SCTP_MIB_ACTIVEESTABS,			/* ActiveEstabs */
+	SCTP_MIB_PASSIVEESTABS,			/* PassiveEstabs */
+	SCTP_MIB_ABORTEDS,			/* Aborteds */
+	SCTP_MIB_SHUTDOWNS,			/* Shutdowns */
+	SCTP_MIB_OUTOFBLUES,			/* OutOfBlues */
+	SCTP_MIB_CHECKSUMERRORS,		/* ChecksumErrors */
+	SCTP_MIB_OUTCTRLCHUNKS,			/* OutCtrlChunks */
+	SCTP_MIB_OUTORDERCHUNKS,		/* OutOrderChunks */
+	SCTP_MIB_OUTUNORDERCHUNKS,		/* OutUnorderChunks */
+	SCTP_MIB_INCTRLCHUNKS,			/* InCtrlChunks */
+	SCTP_MIB_INORDERCHUNKS,			/* InOrderChunks */
+	SCTP_MIB_INUNORDERCHUNKS,		/* InUnorderChunks */
+	SCTP_MIB_FRAGUSRMSGS,			/* FragUsrMsgs */
+	SCTP_MIB_REASMUSRMSGS,			/* ReasmUsrMsgs */
+	SCTP_MIB_OUTSCTPPACKS,			/* OutSCTPPacks */
+	SCTP_MIB_INSCTPPACKS,			/* InSCTPPacks */
+	SCTP_MIB_T1_INIT_EXPIREDS,
+	SCTP_MIB_T1_COOKIE_EXPIREDS,
+	SCTP_MIB_T2_SHUTDOWN_EXPIREDS,
+	SCTP_MIB_T3_RTX_EXPIREDS,
+	SCTP_MIB_T4_RTO_EXPIREDS,
+	SCTP_MIB_T5_SHUTDOWN_GUARD_EXPIREDS,
+	SCTP_MIB_DELAY_SACK_EXPIREDS,
+	SCTP_MIB_AUTOCLOSE_EXPIREDS,
+	SCTP_MIB_T1_RETRANSMITS,
+	SCTP_MIB_T3_RETRANSMITS,
+	SCTP_MIB_PMTUD_RETRANSMITS,
+	SCTP_MIB_FAST_RETRANSMITS,
+	SCTP_MIB_IN_PKT_SOFTIRQ,
+	SCTP_MIB_IN_PKT_BACKLOG,
+	SCTP_MIB_IN_PKT_DISCARDS,
+	SCTP_MIB_IN_DATA_CHUNK_DISCARDS,
+	__SCTP_MIB_MAX
+};
+
+#define SCTP_MIB_MAX    __SCTP_MIB_MAX
+struct sctp_mib {
+        unsigned long   mibs[SCTP_MIB_MAX];
+};
+
+
+/* Print debugging messages.  */
+#if SCTP_DEBUG
+extern int sctp_debug_flag;
+#define SCTP_DEBUG_PRINTK(fmt, args...)			\
+do {							\
+	if (sctp_debug_flag)				\
+		printk(KERN_DEBUG pr_fmt(fmt), ##args);	\
+} while (0)
+#define SCTP_DEBUG_PRINTK_CONT(fmt, args...)		\
+do {							\
+	if (sctp_debug_flag)				\
+		pr_cont(fmt, ##args);			\
+} while (0)
+#define SCTP_DEBUG_PRINTK_IPADDR(fmt_lead, fmt_trail,			\
+				 args_lead, addr, args_trail...)	\
+do {									\
+	const union sctp_addr *_addr = (addr);				\
+	if (sctp_debug_flag) {						\
+		if (_addr->sa.sa_family == AF_INET6) {			\
+			printk(KERN_DEBUG				\
+			       pr_fmt(fmt_lead "%pI6" fmt_trail),	\
+			       args_lead,				\
+			       &_addr->v6.sin6_addr,			\
+			       args_trail);				\
+		} else {						\
+			printk(KERN_DEBUG				\
+			       pr_fmt(fmt_lead "%pI4" fmt_trail),	\
+			       args_lead,				\
+			       &_addr->v4.sin_addr.s_addr,		\
+			       args_trail);				\
+		}							\
+	}								\
+} while (0)
+#define SCTP_ENABLE_DEBUG { sctp_debug_flag = 1; }
+#define SCTP_DISABLE_DEBUG { sctp_debug_flag = 0; }
+
+#define SCTP_ASSERT(expr, str, func) \
+	if (!(expr)) { \
+		SCTP_DEBUG_PRINTK("Assertion Failed: %s(%s) at %s:%s:%d\n", \
+			str, (#expr), __FILE__, __func__, __LINE__); \
+		func; \
+	}
+
+#else	/* SCTP_DEBUG */
+
+#define SCTP_DEBUG_PRINTK(whatever...)
+#define SCTP_DEBUG_PRINTK_CONT(fmt, args...)
+#define SCTP_DEBUG_PRINTK_IPADDR(whatever...)
+#define SCTP_ENABLE_DEBUG
+#define SCTP_DISABLE_DEBUG
+#define SCTP_ASSERT(expr, str, func)
+
+#endif /* SCTP_DEBUG */
+
+
+/*
+ * Macros for keeping a global reference of object allocations.
+ */
+#ifdef CONFIG_SCTP_DBG_OBJCNT
+
+extern atomic_t sctp_dbg_objcnt_sock;
+extern atomic_t sctp_dbg_objcnt_ep;
+extern atomic_t sctp_dbg_objcnt_assoc;
+extern atomic_t sctp_dbg_objcnt_transport;
+extern atomic_t sctp_dbg_objcnt_chunk;
+extern atomic_t sctp_dbg_objcnt_bind_addr;
+extern atomic_t sctp_dbg_objcnt_bind_bucket;
+extern atomic_t sctp_dbg_objcnt_addr;
+extern atomic_t sctp_dbg_objcnt_ssnmap;
+extern atomic_t sctp_dbg_objcnt_datamsg;
+extern atomic_t sctp_dbg_objcnt_keys;
+
+/* Macros to atomically increment/decrement objcnt counters.  */
+#define SCTP_DBG_OBJCNT_INC(name) \
+atomic_inc(&sctp_dbg_objcnt_## name)
+#define SCTP_DBG_OBJCNT_DEC(name) \
+atomic_dec(&sctp_dbg_objcnt_## name)
+#define SCTP_DBG_OBJCNT(name) \
+atomic_t sctp_dbg_objcnt_## name = ATOMIC_INIT(0)
+
+/* Macro to help create new entries in in the global array of
+ * objcnt counters.
+ */
+#define SCTP_DBG_OBJCNT_ENTRY(name) \
+{.label= #name, .counter= &sctp_dbg_objcnt_## name}
+
+void sctp_dbg_objcnt_init(void);
+void sctp_dbg_objcnt_exit(void);
+
+#else
+
+#define SCTP_DBG_OBJCNT_INC(name)
+#define SCTP_DBG_OBJCNT_DEC(name)
+
+static inline void sctp_dbg_objcnt_init(void) { return; }
+static inline void sctp_dbg_objcnt_exit(void) { return; }
+
+#endif /* CONFIG_SCTP_DBG_OBJCOUNT */
+
+#if defined CONFIG_SYSCTL
+void sctp_sysctl_register(void);
+void sctp_sysctl_unregister(void);
+#else
+static inline void sctp_sysctl_register(void) { return; }
+static inline void sctp_sysctl_unregister(void) { return; }
+#endif
+
+/* Size of Supported Address Parameter for 'x' address types. */
+#define SCTP_SAT_LEN(x) (sizeof(struct sctp_paramhdr) + (x) * sizeof(__u16))
+
+#if IS_ENABLED(CONFIG_IPV6)
+
+void sctp_v6_pf_init(void);
+void sctp_v6_pf_exit(void);
+int sctp_v6_protosw_init(void);
+void sctp_v6_protosw_exit(void);
+int sctp_v6_add_protocol(void);
+void sctp_v6_del_protocol(void);
+
+#else /* #ifdef defined(CONFIG_IPV6) */
+
+static inline void sctp_v6_pf_init(void) { return; }
+static inline void sctp_v6_pf_exit(void) { return; }
+static inline int sctp_v6_protosw_init(void) { return 0; }
+static inline void sctp_v6_protosw_exit(void) { return; }
+static inline int sctp_v6_add_protocol(void) { return 0; }
+static inline void sctp_v6_del_protocol(void) { return; }
+
+#endif /* #if defined(CONFIG_IPV6) */
+
+
+/* Map an association to an assoc_id. */
+static inline sctp_assoc_t sctp_assoc2id(const struct sctp_association *asoc)
+{
+	return asoc ? asoc->assoc_id : 0;
+}
+
+/* Look up the association by its id.  */
+struct sctp_association *sctp_id2assoc(struct sock *sk, sctp_assoc_t id);
+
+int sctp_do_peeloff(struct sock *sk, sctp_assoc_t id, struct socket **sockp);
+
+/* A macro to walk a list of skbs.  */
+#define sctp_skb_for_each(pos, head, tmp) \
+	skb_queue_walk_safe(head, pos, tmp)
+
+/* A helper to append an entire skb list (list) to another (head). */
+static inline void sctp_skb_list_tail(struct sk_buff_head *list,
+				      struct sk_buff_head *head)
+{
+	unsigned long flags;
+
+	sctp_spin_lock_irqsave(&head->lock, flags);
+	sctp_spin_lock(&list->lock);
+
+	skb_queue_splice_tail_init(list, head);
+
+	sctp_spin_unlock(&list->lock);
+	sctp_spin_unlock_irqrestore(&head->lock, flags);
+}
+
+/**
+ *	sctp_list_dequeue - remove from the head of the queue
+ *	@list: list to dequeue from
+ *
+ *	Remove the head of the list. The head item is
+ *	returned or %NULL if the list is empty.
+ */
+
+static inline struct list_head *sctp_list_dequeue(struct list_head *list)
+{
+	struct list_head *result = NULL;
+
+	if (list->next != list) {
+		result = list->next;
+		list->next = result->next;
+		list->next->prev = list;
+		INIT_LIST_HEAD(result);
+	}
+	return result;
+}
+
+/* SCTP version of skb_set_owner_r.  We need this one because
+ * of the way we have to do receive buffer accounting on bundled
+ * chunks.
+ */
+static inline void sctp_skb_set_owner_r(struct sk_buff *skb, struct sock *sk)
+{
+	struct sctp_ulpevent *event = sctp_skb2event(skb);
+
+	skb_orphan(skb);
+	skb->sk = sk;
+	skb->destructor = sctp_sock_rfree;
+	atomic_add(event->rmem_len, &sk->sk_rmem_alloc);
+	/*
+	 * This mimics the behavior of skb_set_owner_r
+	 */
+	sk->sk_forward_alloc -= event->rmem_len;
+}
+
+/* Tests if the list has one and only one entry. */
+static inline int sctp_list_single_entry(struct list_head *head)
+{
+	return (head->next != head) && (head->next == head->prev);
+}
+
+/* Generate a random jitter in the range of -50% ~ +50% of input RTO. */
+static inline __s32 sctp_jitter(__u32 rto)
+{
+	static __u32 sctp_rand;
+	__s32 ret;
+
+	/* Avoid divide by zero. */
+	if (!rto)
+		rto = 1;
+
+	sctp_rand += jiffies;
+	sctp_rand ^= (sctp_rand << 12);
+	sctp_rand ^= (sctp_rand >> 20);
+
+	/* Choose random number from 0 to rto, then move to -50% ~ +50%
+	 * of rto.
+	 */
+	ret = sctp_rand % rto - (rto >> 1);
+	return ret;
+}
+
+/* Break down data chunks at this point.  */
+static inline int sctp_frag_point(const struct sctp_association *asoc, int pmtu)
+{
+	struct sctp_sock *sp = sctp_sk(asoc->base.sk);
+	int frag = pmtu;
+
+	frag -= sp->pf->af->net_header_len;
+	frag -= sizeof(struct sctphdr) + sizeof(struct sctp_data_chunk);
+
+	if (asoc->user_frag)
+		frag = min_t(int, frag, asoc->user_frag);
+
+	frag = min_t(int, frag, SCTP_MAX_CHUNK_LEN);
+
+	return frag;
+}
+
+static inline void sctp_assoc_pending_pmtu(struct sctp_association *asoc)
+{
+
+	sctp_assoc_sync_pmtu(asoc);
+	asoc->pmtu_pending = 0;
+}
+
+/* Walk through a list of TLV parameters.  Don't trust the
+ * individual parameter lengths and instead depend on
+ * the chunk length to indicate when to stop.  Make sure
+ * there is room for a param header too.
+ */
+#define sctp_walk_params(pos, chunk, member)\
+_sctp_walk_params((pos), (chunk), ntohs((chunk)->chunk_hdr.length), member)
+
+#define _sctp_walk_params(pos, chunk, end, member)\
+for (pos.v = chunk->member;\
+     pos.v <= (void *)chunk + end - ntohs(pos.p->length) &&\
+     ntohs(pos.p->length) >= sizeof(sctp_paramhdr_t);\
+     pos.v += WORD_ROUND(ntohs(pos.p->length)))
+
+#define sctp_walk_errors(err, chunk_hdr)\
+_sctp_walk_errors((err), (chunk_hdr), ntohs((chunk_hdr)->length))
+
+#define _sctp_walk_errors(err, chunk_hdr, end)\
+for (err = (sctp_errhdr_t *)((void *)chunk_hdr + \
+	    sizeof(sctp_chunkhdr_t));\
+     (void *)err <= (void *)chunk_hdr + end - ntohs(err->length) &&\
+     ntohs(err->length) >= sizeof(sctp_errhdr_t); \
+     err = (sctp_errhdr_t *)((void *)err + WORD_ROUND(ntohs(err->length))))
+
+#define sctp_walk_fwdtsn(pos, chunk)\
+_sctp_walk_fwdtsn((pos), (chunk), ntohs((chunk)->chunk_hdr->length) - sizeof(struct sctp_fwdtsn_chunk))
+
+#define _sctp_walk_fwdtsn(pos, chunk, end)\
+for (pos = chunk->subh.fwdtsn_hdr->skip;\
+     (void *)pos <= (void *)chunk->subh.fwdtsn_hdr->skip + end - sizeof(struct sctp_fwdtsn_skip);\
+     pos++)
+
+/* Round an int up to the next multiple of 4.  */
+#define WORD_ROUND(s) (((s)+3)&~3)
+
+/* Make a new instance of type.  */
+#define t_new(type, flags)	(type *)kzalloc(sizeof(type), flags)
+
+/* Compare two timevals.  */
+#define tv_lt(s, t) \
+   (s.tv_sec < t.tv_sec || (s.tv_sec == t.tv_sec && s.tv_usec < t.tv_usec))
+
+/* Add tv1 to tv2. */
+#define TIMEVAL_ADD(tv1, tv2) \
+({ \
+        suseconds_t usecs = (tv2).tv_usec + (tv1).tv_usec; \
+        time_t secs = (tv2).tv_sec + (tv1).tv_sec; \
+\
+        if (usecs >= 1000000) { \
+                usecs -= 1000000; \
+                secs++; \
+        } \
+        (tv2).tv_sec = secs; \
+        (tv2).tv_usec = usecs; \
+})
+
+/* External references. */
+
+extern struct proto sctp_prot;
+extern struct proto sctpv6_prot;
+extern struct proc_dir_entry *proc_net_sctp;
+void sctp_put_port(struct sock *sk);
+
+extern struct idr sctp_assocs_id;
+extern spinlock_t sctp_assocs_id_lock;
+
+/* Static inline functions. */
+
+/* Convert from an IP version number to an Address Family symbol.  */
+static inline int ipver2af(__u8 ipver)
+{
+	switch (ipver) {
+	case 4:
+	        return  AF_INET;
+	case 6:
+		return AF_INET6;
+	default:
+		return 0;
+	}
+}
+
+/* Convert from an address parameter type to an address family.  */
+static inline int param_type2af(__be16 type)
+{
+	switch (type) {
+	case SCTP_PARAM_IPV4_ADDRESS:
+	        return  AF_INET;
+	case SCTP_PARAM_IPV6_ADDRESS:
+		return AF_INET6;
+	default:
+		return 0;
+	}
+}
+
+/* Perform some sanity checks. */
+static inline int sctp_sanity_check(void)
+{
+	SCTP_ASSERT(sizeof(struct sctp_ulpevent) <=
+		    sizeof(((struct sk_buff *)0)->cb),
+		    "SCTP: ulpevent does not fit in skb!\n", return 0);
+
+	return 1;
+}
+
+/* Warning: The following hash functions assume a power of two 'size'. */
+/* This is the hash function for the SCTP port hash table. */
+static inline int sctp_phashfn(__u16 lport)
+{
+	return lport & (sctp_port_hashsize - 1);
+}
+
+/* This is the hash function for the endpoint hash table. */
+static inline int sctp_ep_hashfn(__u16 lport)
+{
+	return lport & (sctp_ep_hashsize - 1);
+}
+
+/* This is the hash function for the association hash table. */
+static inline int sctp_assoc_hashfn(__u16 lport, __u16 rport)
+{
+	int h = (lport << 16) + rport;
+	h ^= h>>8;
+	return h & (sctp_assoc_hashsize - 1);
+}
+
+/* This is the hash function for the association hash table.  This is
+ * not used yet, but could be used as a better hash function when
+ * we have a vtag.
+ */
+static inline int sctp_vtag_hashfn(__u16 lport, __u16 rport, __u32 vtag)
+{
+	int h = (lport << 16) + rport;
+	h ^= vtag;
+	return h & (sctp_assoc_hashsize - 1);
+}
+
+#define sctp_for_each_hentry(epb, node, head) \
+	hlist_for_each_entry(epb, node, head, node)
+
+/* Is a socket of this style? */
+#define sctp_style(sk, style) __sctp_style((sk), (SCTP_SOCKET_##style))
+static inline int __sctp_style(const struct sock *sk, sctp_socket_type_t style)
+{
+	return sctp_sk(sk)->type == style;
+}
+
+/* Is the association in this state? */
+#define sctp_state(asoc, state) __sctp_state((asoc), (SCTP_STATE_##state))
+static inline int __sctp_state(const struct sctp_association *asoc,
+			       sctp_state_t state)
+{
+	return asoc->state == state;
+}
+
+/* Is the socket in this state? */
+#define sctp_sstate(sk, state) __sctp_sstate((sk), (SCTP_SS_##state))
+static inline int __sctp_sstate(const struct sock *sk, sctp_sock_state_t state)
+{
+	return sk->sk_state == state;
+}
+
+/* Map v4-mapped v6 address back to v4 address */
+static inline void sctp_v6_map_v4(union sctp_addr *addr)
+{
+	addr->v4.sin_family = AF_INET;
+	addr->v4.sin_port = addr->v6.sin6_port;
+	addr->v4.sin_addr.s_addr = addr->v6.sin6_addr.s6_addr32[3];
+}
+
+/* Map v4 address to v4-mapped v6 address */
+static inline void sctp_v4_map_v6(union sctp_addr *addr)
+{
+	addr->v6.sin6_family = AF_INET6;
+	addr->v6.sin6_port = addr->v4.sin_port;
+	addr->v6.sin6_addr.s6_addr32[3] = addr->v4.sin_addr.s_addr;
+	addr->v6.sin6_addr.s6_addr32[0] = 0;
+	addr->v6.sin6_addr.s6_addr32[1] = 0;
+	addr->v6.sin6_addr.s6_addr32[2] = htonl(0x0000ffff);
+}
+
+/* The cookie is always 0 since this is how it's used in the
+ * pmtu code.
+ */
+static inline struct dst_entry *sctp_transport_dst_check(struct sctp_transport *t)
+{
+	if (t->dst && !dst_check(t->dst, 0)) {
+		dst_release(t->dst);
+		t->dst = NULL;
+	}
+
+	return t->dst;
+}
+
+#endif /* __net_sctp_h__ */
diff --git a/include/net/sctp/sm.h b/include/net/sctp/sm.h
new file mode 100644
index 00000000..9148632b
--- /dev/null
+++ b/include/net/sctp/sm.h
@@ -0,0 +1,448 @@
+/* SCTP kernel implementation
+ * (C) Copyright IBM Corp. 2001, 2004
+ * Copyright (c) 1999-2000 Cisco, Inc.
+ * Copyright (c) 1999-2001 Motorola, Inc.
+ * Copyright (c) 2001 Intel Corp.
+ *
+ * This file is part of the SCTP kernel implementation
+ *
+ * These are definitions needed by the state machine.
+ *
+ * This SCTP implementation is free software;
+ * you can redistribute it and/or modify it under the terms of
+ * the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This SCTP implementation is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ *                 ************************
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with GNU CC; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ * Please send any bug reports or fixes you make to the
+ * email addresses:
+ *    lksctp developers <lksctp-developers@lists.sourceforge.net>
+ *
+ * Or submit a bug report through the following website:
+ *    http://www.sf.net/projects/lksctp
+ *
+ * Written or modified by:
+ *    La Monte H.P. Yarroll <piggy@acm.org>
+ *    Karl Knutson <karl@athena.chicago.il.us>
+ *    Xingang Guo <xingang.guo@intel.com>
+ *    Jon Grimm <jgrimm@us.ibm.com>
+ *    Dajiang Zhang <dajiang.zhang@nokia.com>
+ *    Sridhar Samudrala <sri@us.ibm.com>
+ *    Daisy Chang <daisyc@us.ibm.com>
+ *    Ardelle Fan <ardelle.fan@intel.com>
+ *    Kevin Gao <kevin.gao@intel.com>
+ *
+ * Any bugs reported given to us we will try to fix... any fixes shared will
+ * be incorporated into the next SCTP release.
+ */
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/slab.h>
+#include <linux/in.h>
+#include <net/sctp/command.h>
+#include <net/sctp/sctp.h>
+
+#ifndef __sctp_sm_h__
+#define __sctp_sm_h__
+
+/*
+ * Possible values for the disposition are:
+ */
+typedef enum {
+	SCTP_DISPOSITION_DISCARD,	 /* No further processing.  */
+	SCTP_DISPOSITION_CONSUME,	 /* Process return values normally.  */
+	SCTP_DISPOSITION_NOMEM,		 /* We ran out of memory--recover.  */
+	SCTP_DISPOSITION_DELETE_TCB,	 /* Close the association.  */
+	SCTP_DISPOSITION_ABORT,		 /* Close the association NOW.  */
+	SCTP_DISPOSITION_VIOLATION,	 /* The peer is misbehaving.  */
+	SCTP_DISPOSITION_NOT_IMPL,	 /* This entry is not implemented.  */
+	SCTP_DISPOSITION_ERROR,		 /* This is plain old user error.  */
+	SCTP_DISPOSITION_BUG,		 /* This is a bug.  */
+} sctp_disposition_t;
+
+typedef struct {
+	int name;
+	int action;
+} sctp_sm_command_t;
+
+typedef sctp_disposition_t (sctp_state_fn_t) (const struct sctp_endpoint *,
+					      const struct sctp_association *,
+					      const sctp_subtype_t type,
+					      void *arg,
+					      sctp_cmd_seq_t *);
+typedef void (sctp_timer_event_t) (unsigned long);
+typedef struct {
+	sctp_state_fn_t *fn;
+	const char *name;
+} sctp_sm_table_entry_t;
+
+/* A naming convention of "sctp_sf_xxx" applies to all the state functions
+ * currently in use.
+ */
+
+/* Prototypes for generic state functions. */
+sctp_state_fn_t sctp_sf_not_impl;
+sctp_state_fn_t sctp_sf_bug;
+
+/* Prototypes for gener timer state functions. */
+sctp_state_fn_t sctp_sf_timer_ignore;
+
+/* Prototypes for chunk state functions. */
+sctp_state_fn_t sctp_sf_do_9_1_abort;
+sctp_state_fn_t sctp_sf_cookie_wait_abort;
+sctp_state_fn_t sctp_sf_cookie_echoed_abort;
+sctp_state_fn_t sctp_sf_shutdown_pending_abort;
+sctp_state_fn_t sctp_sf_shutdown_sent_abort;
+sctp_state_fn_t sctp_sf_shutdown_ack_sent_abort;
+sctp_state_fn_t sctp_sf_do_5_1B_init;
+sctp_state_fn_t sctp_sf_do_5_1C_ack;
+sctp_state_fn_t sctp_sf_do_5_1D_ce;
+sctp_state_fn_t sctp_sf_do_5_1E_ca;
+sctp_state_fn_t sctp_sf_do_4_C;
+sctp_state_fn_t sctp_sf_eat_data_6_2;
+sctp_state_fn_t sctp_sf_eat_data_fast_4_4;
+sctp_state_fn_t sctp_sf_eat_sack_6_2;
+sctp_state_fn_t sctp_sf_operr_notify;
+sctp_state_fn_t sctp_sf_t1_init_timer_expire;
+sctp_state_fn_t sctp_sf_t1_cookie_timer_expire;
+sctp_state_fn_t sctp_sf_t2_timer_expire;
+sctp_state_fn_t sctp_sf_t4_timer_expire;
+sctp_state_fn_t sctp_sf_t5_timer_expire;
+sctp_state_fn_t sctp_sf_sendbeat_8_3;
+sctp_state_fn_t sctp_sf_beat_8_3;
+sctp_state_fn_t sctp_sf_backbeat_8_3;
+sctp_state_fn_t sctp_sf_do_9_2_final;
+sctp_state_fn_t sctp_sf_do_9_2_shutdown;
+sctp_state_fn_t sctp_sf_do_9_2_shut_ctsn;
+sctp_state_fn_t sctp_sf_do_ecn_cwr;
+sctp_state_fn_t sctp_sf_do_ecne;
+sctp_state_fn_t sctp_sf_ootb;
+sctp_state_fn_t sctp_sf_pdiscard;
+sctp_state_fn_t sctp_sf_violation;
+sctp_state_fn_t sctp_sf_discard_chunk;
+sctp_state_fn_t sctp_sf_do_5_2_1_siminit;
+sctp_state_fn_t sctp_sf_do_5_2_2_dupinit;
+sctp_state_fn_t sctp_sf_do_5_2_3_initack;
+sctp_state_fn_t sctp_sf_do_5_2_4_dupcook;
+sctp_state_fn_t sctp_sf_unk_chunk;
+sctp_state_fn_t sctp_sf_do_8_5_1_E_sa;
+sctp_state_fn_t sctp_sf_cookie_echoed_err;
+sctp_state_fn_t sctp_sf_do_asconf;
+sctp_state_fn_t sctp_sf_do_asconf_ack;
+sctp_state_fn_t sctp_sf_do_9_2_reshutack;
+sctp_state_fn_t sctp_sf_eat_fwd_tsn;
+sctp_state_fn_t sctp_sf_eat_fwd_tsn_fast;
+sctp_state_fn_t sctp_sf_eat_auth;
+
+/* Prototypes for primitive event state functions.  */
+sctp_state_fn_t sctp_sf_do_prm_asoc;
+sctp_state_fn_t sctp_sf_do_prm_send;
+sctp_state_fn_t sctp_sf_do_9_2_prm_shutdown;
+sctp_state_fn_t sctp_sf_cookie_wait_prm_shutdown;
+sctp_state_fn_t sctp_sf_cookie_echoed_prm_shutdown;
+sctp_state_fn_t sctp_sf_do_9_1_prm_abort;
+sctp_state_fn_t sctp_sf_cookie_wait_prm_abort;
+sctp_state_fn_t sctp_sf_cookie_echoed_prm_abort;
+sctp_state_fn_t sctp_sf_shutdown_pending_prm_abort;
+sctp_state_fn_t sctp_sf_shutdown_sent_prm_abort;
+sctp_state_fn_t sctp_sf_shutdown_ack_sent_prm_abort;
+sctp_state_fn_t sctp_sf_error_closed;
+sctp_state_fn_t sctp_sf_error_shutdown;
+sctp_state_fn_t sctp_sf_ignore_primitive;
+sctp_state_fn_t sctp_sf_do_prm_requestheartbeat;
+sctp_state_fn_t sctp_sf_do_prm_asconf;
+
+/* Prototypes for other event state functions.  */
+sctp_state_fn_t sctp_sf_do_no_pending_tsn;
+sctp_state_fn_t sctp_sf_do_9_2_start_shutdown;
+sctp_state_fn_t sctp_sf_do_9_2_shutdown_ack;
+sctp_state_fn_t sctp_sf_ignore_other;
+sctp_state_fn_t sctp_sf_cookie_wait_icmp_abort;
+
+/* Prototypes for timeout event state functions.  */
+sctp_state_fn_t sctp_sf_do_6_3_3_rtx;
+sctp_state_fn_t sctp_sf_do_6_2_sack;
+sctp_state_fn_t sctp_sf_autoclose_timer_expire;
+
+/* Prototypes for utility support functions.  */
+__u8 sctp_get_chunk_type(struct sctp_chunk *chunk);
+const sctp_sm_table_entry_t *sctp_sm_lookup_event(sctp_event_t,
+					    sctp_state_t,
+					    sctp_subtype_t);
+int sctp_chunk_iif(const struct sctp_chunk *);
+struct sctp_association *sctp_make_temp_asoc(const struct sctp_endpoint *,
+					     struct sctp_chunk *,
+					     gfp_t gfp);
+__u32 sctp_generate_verification_tag(void);
+void sctp_populate_tie_tags(__u8 *cookie, __u32 curTag, __u32 hisTag);
+
+/* Prototypes for chunk-building functions.  */
+struct sctp_chunk *sctp_make_init(const struct sctp_association *,
+			     const struct sctp_bind_addr *,
+			     gfp_t gfp, int vparam_len);
+struct sctp_chunk *sctp_make_init_ack(const struct sctp_association *,
+				 const struct sctp_chunk *,
+				 const gfp_t gfp,
+				 const int unkparam_len);
+struct sctp_chunk *sctp_make_cookie_echo(const struct sctp_association *,
+				    const struct sctp_chunk *);
+struct sctp_chunk *sctp_make_cookie_ack(const struct sctp_association *,
+				   const struct sctp_chunk *);
+struct sctp_chunk *sctp_make_cwr(const struct sctp_association *,
+				 const __u32 lowest_tsn,
+				 const struct sctp_chunk *);
+struct sctp_chunk * sctp_make_datafrag_empty(struct sctp_association *,
+					const struct sctp_sndrcvinfo *sinfo,
+					int len, const __u8 flags,
+					__u16 ssn);
+struct sctp_chunk *sctp_make_ecne(const struct sctp_association *,
+				  const __u32);
+struct sctp_chunk *sctp_make_sack(const struct sctp_association *);
+struct sctp_chunk *sctp_make_shutdown(const struct sctp_association *asoc,
+				      const struct sctp_chunk *chunk);
+struct sctp_chunk *sctp_make_shutdown_ack(const struct sctp_association *asoc,
+					  const struct sctp_chunk *);
+struct sctp_chunk *sctp_make_shutdown_complete(const struct sctp_association *,
+					  const struct sctp_chunk *);
+void sctp_init_cause(struct sctp_chunk *, __be16 cause, size_t);
+struct sctp_chunk *sctp_make_abort(const struct sctp_association *,
+			      const struct sctp_chunk *,
+			      const size_t hint);
+struct sctp_chunk *sctp_make_abort_no_data(const struct sctp_association *,
+				      const struct sctp_chunk *,
+				      __u32 tsn);
+struct sctp_chunk *sctp_make_abort_user(const struct sctp_association *,
+					const struct msghdr *, size_t msg_len);
+struct sctp_chunk *sctp_make_abort_violation(const struct sctp_association *,
+				   const struct sctp_chunk *,
+				   const __u8 *,
+				   const size_t );
+struct sctp_chunk *sctp_make_violation_paramlen(const struct sctp_association *,
+				   const struct sctp_chunk *,
+				   struct sctp_paramhdr *);
+struct sctp_chunk *sctp_make_heartbeat(const struct sctp_association *,
+				  const struct sctp_transport *);
+struct sctp_chunk *sctp_make_heartbeat_ack(const struct sctp_association *,
+				      const struct sctp_chunk *,
+				      const void *payload,
+				      const size_t paylen);
+struct sctp_chunk *sctp_make_op_error(const struct sctp_association *,
+				 const struct sctp_chunk *chunk,
+				 __be16 cause_code,
+				 const void *payload,
+				 size_t paylen,
+				 size_t reserve_tail);
+
+struct sctp_chunk *sctp_make_asconf_update_ip(struct sctp_association *,
+					      union sctp_addr *,
+					      struct sockaddr *,
+					      int, __be16);
+struct sctp_chunk *sctp_make_asconf_set_prim(struct sctp_association *asoc,
+					     union sctp_addr *addr);
+int sctp_verify_asconf(const struct sctp_association *asoc,
+		       struct sctp_paramhdr *param_hdr, void *chunk_end,
+		       struct sctp_paramhdr **errp);
+struct sctp_chunk *sctp_process_asconf(struct sctp_association *asoc,
+				       struct sctp_chunk *asconf);
+int sctp_process_asconf_ack(struct sctp_association *asoc,
+			    struct sctp_chunk *asconf_ack);
+struct sctp_chunk *sctp_make_fwdtsn(const struct sctp_association *asoc,
+				    __u32 new_cum_tsn, size_t nstreams,
+				    struct sctp_fwdtsn_skip *skiplist);
+struct sctp_chunk *sctp_make_auth(const struct sctp_association *asoc);
+
+void sctp_chunk_assign_tsn(struct sctp_chunk *);
+void sctp_chunk_assign_ssn(struct sctp_chunk *);
+
+/* Prototypes for statetable processing. */
+
+int sctp_do_sm(sctp_event_t event_type, sctp_subtype_t subtype,
+	       sctp_state_t state,
+               struct sctp_endpoint *,
+               struct sctp_association *asoc,
+               void *event_arg,
+	       gfp_t gfp);
+
+/* 2nd level prototypes */
+void sctp_generate_t3_rtx_event(unsigned long peer);
+void sctp_generate_heartbeat_event(unsigned long peer);
+void sctp_generate_proto_unreach_event(unsigned long peer);
+
+void sctp_ootb_pkt_free(struct sctp_packet *);
+
+struct sctp_association *sctp_unpack_cookie(const struct sctp_endpoint *,
+				       const struct sctp_association *,
+				       struct sctp_chunk *,
+				       gfp_t gfp, int *err,
+				       struct sctp_chunk **err_chk_p);
+int sctp_addip_addr_config(struct sctp_association *, sctp_param_t,
+			   struct sockaddr_storage*, int);
+
+/* 3rd level prototypes */
+__u32 sctp_generate_tag(const struct sctp_endpoint *);
+__u32 sctp_generate_tsn(const struct sctp_endpoint *);
+
+/* Extern declarations for major data structures.  */
+extern sctp_timer_event_t *sctp_timer_events[SCTP_NUM_TIMEOUT_TYPES];
+
+
+/* Get the size of a DATA chunk payload. */
+static inline __u16 sctp_data_size(struct sctp_chunk *chunk)
+{
+	__u16 size;
+
+	size = ntohs(chunk->chunk_hdr->length);
+	size -= sizeof(sctp_data_chunk_t);
+
+	return size;
+}
+
+/* Compare two TSNs */
+
+/* RFC 1982 - Serial Number Arithmetic
+ *
+ * 2. Comparison
+ *  Then, s1 is said to be equal to s2 if and only if i1 is equal to i2,
+ *  in all other cases, s1 is not equal to s2.
+ *
+ * s1 is said to be less than s2 if, and only if, s1 is not equal to s2,
+ * and
+ *
+ *      (i1 < i2 and i2 - i1 < 2^(SERIAL_BITS - 1)) or
+ *      (i1 > i2 and i1 - i2 > 2^(SERIAL_BITS - 1))
+ *
+ * s1 is said to be greater than s2 if, and only if, s1 is not equal to
+ * s2, and
+ *
+ *      (i1 < i2 and i2 - i1 > 2^(SERIAL_BITS - 1)) or
+ *      (i1 > i2 and i1 - i2 < 2^(SERIAL_BITS - 1))
+ */
+
+/*
+ * RFC 2960
+ *  1.6 Serial Number Arithmetic
+ *
+ * Comparisons and arithmetic on TSNs in this document SHOULD use Serial
+ * Number Arithmetic as defined in [RFC1982] where SERIAL_BITS = 32.
+ */
+
+enum {
+	TSN_SIGN_BIT = (1<<31)
+};
+
+static inline int TSN_lt(__u32 s, __u32 t)
+{
+	return ((s) - (t)) & TSN_SIGN_BIT;
+}
+
+static inline int TSN_lte(__u32 s, __u32 t)
+{
+	return ((s) == (t)) || (((s) - (t)) & TSN_SIGN_BIT);
+}
+
+/* Compare two SSNs */
+
+/*
+ * RFC 2960
+ *  1.6 Serial Number Arithmetic
+ *
+ * Comparisons and arithmetic on Stream Sequence Numbers in this document
+ * SHOULD use Serial Number Arithmetic as defined in [RFC1982] where
+ * SERIAL_BITS = 16.
+ */
+enum {
+	SSN_SIGN_BIT = (1<<15)
+};
+
+static inline int SSN_lt(__u16 s, __u16 t)
+{
+	return ((s) - (t)) & SSN_SIGN_BIT;
+}
+
+static inline int SSN_lte(__u16 s, __u16 t)
+{
+	return ((s) == (t)) || (((s) - (t)) & SSN_SIGN_BIT);
+}
+
+/*
+ * ADDIP 3.1.1
+ * The valid range of Serial Number is from 0 to 4294967295 (2**32 - 1). Serial
+ * Numbers wrap back to 0 after reaching 4294967295.
+ */
+enum {
+	ADDIP_SERIAL_SIGN_BIT = (1<<31)
+};
+
+static inline int ADDIP_SERIAL_gte(__u16 s, __u16 t)
+{
+	return ((s) == (t)) || (((t) - (s)) & ADDIP_SERIAL_SIGN_BIT);
+}
+
+/* Check VTAG of the packet matches the sender's own tag. */
+static inline int
+sctp_vtag_verify(const struct sctp_chunk *chunk,
+		 const struct sctp_association *asoc)
+{
+	/* RFC 2960 Sec 8.5 When receiving an SCTP packet, the endpoint
+	 * MUST ensure that the value in the Verification Tag field of
+	 * the received SCTP packet matches its own Tag. If the received
+	 * Verification Tag value does not match the receiver's own
+	 * tag value, the receiver shall silently discard the packet...
+	 */
+        if (ntohl(chunk->sctp_hdr->vtag) == asoc->c.my_vtag)
+                return 1;
+
+	return 0;
+}
+
+/* Check VTAG of the packet matches the sender's own tag and the T bit is
+ * not set, OR its peer's tag and the T bit is set in the Chunk Flags.
+ */
+static inline int
+sctp_vtag_verify_either(const struct sctp_chunk *chunk,
+			const struct sctp_association *asoc)
+{
+        /* RFC 2960 Section 8.5.1, sctpimpguide Section 2.41
+	 *
+	 * B) The receiver of a ABORT MUST accept the packet
+	 *    if the Verification Tag field of the packet matches its own tag
+	 *    and the T bit is not set
+	 *    OR
+	 *    it is set to its peer's tag and the T bit is set in the Chunk
+	 *    Flags.
+	 *    Otherwise, the receiver MUST silently discard the packet
+	 *    and take no further action.
+	 *
+	 * C) The receiver of a SHUTDOWN COMPLETE shall accept the packet
+	 *    if the Verification Tag field of the packet matches its own tag
+	 *    and the T bit is not set
+	 *    OR
+	 *    it is set to its peer's tag and the T bit is set in the Chunk
+	 *    Flags.
+	 *    Otherwise, the receiver MUST silently discard the packet
+	 *    and take no further action.  An endpoint MUST ignore the
+	 *    SHUTDOWN COMPLETE if it is not in the SHUTDOWN-ACK-SENT state.
+	 */
+        if ((!sctp_test_T_bit(chunk) &&
+             (ntohl(chunk->sctp_hdr->vtag) == asoc->c.my_vtag)) ||
+	    (sctp_test_T_bit(chunk) && asoc->c.peer_vtag &&
+	     (ntohl(chunk->sctp_hdr->vtag) == asoc->c.peer_vtag))) {
+                return 1;
+	}
+
+	return 0;
+}
+
+#endif /* __sctp_sm_h__ */
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
new file mode 100644
index 00000000..88949a99
--- /dev/null
+++ b/include/net/sctp/structs.h
@@ -0,0 +1,2037 @@
+/* SCTP kernel implementation
+ * (C) Copyright IBM Corp. 2001, 2004
+ * Copyright (c) 1999-2000 Cisco, Inc.
+ * Copyright (c) 1999-2001 Motorola, Inc.
+ * Copyright (c) 2001 Intel Corp.
+ *
+ * This file is part of the SCTP kernel implementation
+ *
+ * This SCTP implementation is free software;
+ * you can redistribute it and/or modify it under the terms of
+ * the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This SCTP implementation is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ *		   ************************
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with GNU CC; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ * Please send any bug reports or fixes you make to the
+ * email addresses:
+ *    lksctp developers <lksctp-developers@lists.sourceforge.net>
+ *
+ * Or submit a bug report through the following website:
+ *    http://www.sf.net/projects/lksctp
+ *
+ * Written or modified by:
+ *    Randall Stewart	    <randall@sctp.chicago.il.us>
+ *    Ken Morneau	    <kmorneau@cisco.com>
+ *    Qiaobing Xie	    <qxie1@email.mot.com>
+ *    La Monte H.P. Yarroll <piggy@acm.org>
+ *    Karl Knutson	    <karl@athena.chicago.il.us>
+ *    Jon Grimm		    <jgrimm@us.ibm.com>
+ *    Xingang Guo	    <xingang.guo@intel.com>
+ *    Hui Huang		    <hui.huang@nokia.com>
+ *    Sridhar Samudrala	    <sri@us.ibm.com>
+ *    Daisy Chang	    <daisyc@us.ibm.com>
+ *    Dajiang Zhang	    <dajiang.zhang@nokia.com>
+ *    Ardelle Fan	    <ardelle.fan@intel.com>
+ *    Ryan Layer	    <rmlayer@us.ibm.com>
+ *    Anup Pemmaiah	    <pemmaiah@cc.usu.edu>
+ *    Kevin Gao             <kevin.gao@intel.com>
+ *
+ * Any bugs reported given to us we will try to fix... any fixes shared will
+ * be incorporated into the next SCTP release.
+ */
+
+#ifndef __sctp_structs_h__
+#define __sctp_structs_h__
+
+#include <linux/time.h>		/* We get struct timespec.    */
+#include <linux/socket.h>	/* linux/in.h needs this!!    */
+#include <linux/in.h>		/* We get struct sockaddr_in. */
+#include <linux/in6.h>		/* We get struct in6_addr     */
+#include <linux/ipv6.h>
+#include <asm/param.h>		/* We get MAXHOSTNAMELEN.     */
+#include <linux/atomic.h>		/* This gets us atomic counters.  */
+#include <linux/skbuff.h>	/* We need sk_buff_head. */
+#include <linux/workqueue.h>	/* We need tq_struct.	 */
+#include <linux/sctp.h>		/* We need sctp* header structs.  */
+#include <net/sctp/auth.h>	/* We need auth specific structs */
+
+/* A convenience structure for handling sockaddr structures.
+ * We should wean ourselves off this.
+ */
+union sctp_addr {
+	struct sockaddr_in v4;
+	struct sockaddr_in6 v6;
+	struct sockaddr sa;
+};
+
+/* Forward declarations for data structures. */
+struct sctp_globals;
+struct sctp_endpoint;
+struct sctp_association;
+struct sctp_transport;
+struct sctp_packet;
+struct sctp_chunk;
+struct sctp_inq;
+struct sctp_outq;
+struct sctp_bind_addr;
+struct sctp_ulpq;
+struct sctp_ep_common;
+struct sctp_ssnmap;
+struct crypto_hash;
+
+
+#include <net/sctp/tsnmap.h>
+#include <net/sctp/ulpevent.h>
+#include <net/sctp/ulpqueue.h>
+
+/* Structures useful for managing bind/connect. */
+
+struct sctp_bind_bucket {
+	unsigned short	port;
+	unsigned short	fastreuse;
+	struct hlist_node	node;
+	struct hlist_head	owner;
+};
+
+struct sctp_bind_hashbucket {
+	spinlock_t	lock;
+	struct hlist_head	chain;
+};
+
+/* Used for hashing all associations.  */
+struct sctp_hashbucket {
+	rwlock_t	lock;
+	struct hlist_head	chain;
+} __attribute__((__aligned__(8)));
+
+
+/* The SCTP globals structure. */
+extern struct sctp_globals {
+	/* RFC2960 Section 14. Suggested SCTP Protocol Parameter Values
+	 *
+	 * The following protocol parameters are RECOMMENDED:
+	 *
+	 * RTO.Initial		    - 3	 seconds
+	 * RTO.Min		    - 1	 second
+	 * RTO.Max		   -  60 seconds
+	 * RTO.Alpha		    - 1/8  (3 when converted to right shifts.)
+	 * RTO.Beta		    - 1/4  (2 when converted to right shifts.)
+	 */
+	unsigned int rto_initial;
+	unsigned int rto_min;
+	unsigned int rto_max;
+
+	/* Note: rto_alpha and rto_beta are really defined as inverse
+	 * powers of two to facilitate integer operations.
+	 */
+	int rto_alpha;
+	int rto_beta;
+
+	/* Max.Burst		    - 4 */
+	int max_burst;
+
+	/* Whether Cookie Preservative is enabled(1) or not(0) */
+	int cookie_preserve_enable;
+
+	/* Valid.Cookie.Life	    - 60  seconds  */
+	unsigned int valid_cookie_life;
+
+	/* Delayed SACK timeout  200ms default*/
+	unsigned int sack_timeout;
+
+	/* HB.interval		    - 30 seconds  */
+	unsigned int hb_interval;
+
+	/* Association.Max.Retrans  - 10 attempts
+	 * Path.Max.Retrans	    - 5	 attempts (per destination address)
+	 * Max.Init.Retransmits	    - 8	 attempts
+	 */
+	int max_retrans_association;
+	int max_retrans_path;
+	int max_retrans_init;
+
+	/*
+	 * Policy for preforming sctp/socket accounting
+	 * 0   - do socket level accounting, all assocs share sk_sndbuf
+	 * 1   - do sctp accounting, each asoc may use sk_sndbuf bytes
+	 */
+	int sndbuf_policy;
+
+	/*
+	 * Policy for preforming sctp/socket accounting
+	 * 0   - do socket level accounting, all assocs share sk_rcvbuf
+	 * 1   - do sctp accounting, each asoc may use sk_rcvbuf bytes
+	 */
+	int rcvbuf_policy;
+
+	/* The following variables are implementation specific.	 */
+
+	/* Default initialization values to be applied to new associations. */
+	__u16 max_instreams;
+	__u16 max_outstreams;
+
+	/* This is a list of groups of functions for each address
+	 * family that we support.
+	 */
+	struct list_head address_families;
+
+	/* This is the hash of all endpoints. */
+	int ep_hashsize;
+	struct sctp_hashbucket *ep_hashtable;
+
+	/* This is the hash of all associations. */
+	int assoc_hashsize;
+	struct sctp_hashbucket *assoc_hashtable;
+
+	/* This is the sctp port control hash.	*/
+	int port_hashsize;
+	struct sctp_bind_hashbucket *port_hashtable;
+
+	/* This is the global local address list.
+	 * We actively maintain this complete list of addresses on
+	 * the system by catching address add/delete events.
+	 *
+	 * It is a list of sctp_sockaddr_entry.
+	 */
+	struct list_head local_addr_list;
+	int default_auto_asconf;
+	struct list_head addr_waitq;
+	struct timer_list addr_wq_timer;
+	struct list_head auto_asconf_splist;
+	spinlock_t addr_wq_lock;
+
+	/* Lock that protects the local_addr_list writers */
+	spinlock_t addr_list_lock;
+	
+	/* Flag to indicate if addip is enabled. */
+	int addip_enable;
+	int addip_noauth_enable;
+
+	/* Flag to indicate if PR-SCTP is enabled. */
+	int prsctp_enable;
+
+	/* Flag to idicate if SCTP-AUTH is enabled */
+	int auth_enable;
+
+	/*
+	 * Policy to control SCTP IPv4 address scoping
+	 * 0   - Disable IPv4 address scoping
+	 * 1   - Enable IPv4 address scoping
+	 * 2   - Selectively allow only IPv4 private addresses
+	 * 3   - Selectively allow only IPv4 link local address
+	 */
+	int ipv4_scope_policy;
+
+	/* Flag to indicate whether computing and verifying checksum
+	 * is disabled. */
+        bool checksum_disable;
+
+	/* Threshold for rwnd update SACKS.  Receive buffer shifted this many
+	 * bits is an indicator of when to send and window update SACK.
+	 */
+	int rwnd_update_shift;
+
+	/* Threshold for autoclose timeout, in seconds. */
+	unsigned long max_autoclose;
+} sctp_globals;
+
+#define sctp_rto_initial		(sctp_globals.rto_initial)
+#define sctp_rto_min			(sctp_globals.rto_min)
+#define sctp_rto_max			(sctp_globals.rto_max)
+#define sctp_rto_alpha			(sctp_globals.rto_alpha)
+#define sctp_rto_beta			(sctp_globals.rto_beta)
+#define sctp_max_burst			(sctp_globals.max_burst)
+#define sctp_valid_cookie_life		(sctp_globals.valid_cookie_life)
+#define sctp_cookie_preserve_enable	(sctp_globals.cookie_preserve_enable)
+#define sctp_max_retrans_association	(sctp_globals.max_retrans_association)
+#define sctp_sndbuf_policy	 	(sctp_globals.sndbuf_policy)
+#define sctp_rcvbuf_policy	 	(sctp_globals.rcvbuf_policy)
+#define sctp_max_retrans_path		(sctp_globals.max_retrans_path)
+#define sctp_max_retrans_init		(sctp_globals.max_retrans_init)
+#define sctp_sack_timeout		(sctp_globals.sack_timeout)
+#define sctp_hb_interval		(sctp_globals.hb_interval)
+#define sctp_max_instreams		(sctp_globals.max_instreams)
+#define sctp_max_outstreams		(sctp_globals.max_outstreams)
+#define sctp_address_families		(sctp_globals.address_families)
+#define sctp_ep_hashsize		(sctp_globals.ep_hashsize)
+#define sctp_ep_hashtable		(sctp_globals.ep_hashtable)
+#define sctp_assoc_hashsize		(sctp_globals.assoc_hashsize)
+#define sctp_assoc_hashtable		(sctp_globals.assoc_hashtable)
+#define sctp_port_hashsize		(sctp_globals.port_hashsize)
+#define sctp_port_hashtable		(sctp_globals.port_hashtable)
+#define sctp_local_addr_list		(sctp_globals.local_addr_list)
+#define sctp_local_addr_lock		(sctp_globals.addr_list_lock)
+#define sctp_auto_asconf_splist		(sctp_globals.auto_asconf_splist)
+#define sctp_addr_waitq			(sctp_globals.addr_waitq)
+#define sctp_addr_wq_timer		(sctp_globals.addr_wq_timer)
+#define sctp_addr_wq_lock		(sctp_globals.addr_wq_lock)
+#define sctp_default_auto_asconf	(sctp_globals.default_auto_asconf)
+#define sctp_scope_policy		(sctp_globals.ipv4_scope_policy)
+#define sctp_addip_enable		(sctp_globals.addip_enable)
+#define sctp_addip_noauth		(sctp_globals.addip_noauth_enable)
+#define sctp_prsctp_enable		(sctp_globals.prsctp_enable)
+#define sctp_auth_enable		(sctp_globals.auth_enable)
+#define sctp_checksum_disable		(sctp_globals.checksum_disable)
+#define sctp_rwnd_upd_shift		(sctp_globals.rwnd_update_shift)
+#define sctp_max_autoclose		(sctp_globals.max_autoclose)
+
+/* SCTP Socket type: UDP or TCP style. */
+typedef enum {
+	SCTP_SOCKET_UDP = 0,
+	SCTP_SOCKET_UDP_HIGH_BANDWIDTH,
+	SCTP_SOCKET_TCP
+} sctp_socket_type_t;
+
+/* Per socket SCTP information. */
+struct sctp_sock {
+	/* inet_sock has to be the first member of sctp_sock */
+	struct inet_sock inet;
+	/* What kind of a socket is this? */
+	sctp_socket_type_t type;
+
+	/* PF_ family specific functions.  */
+	struct sctp_pf *pf;
+
+	/* Access to HMAC transform. */
+	struct crypto_hash *hmac;
+
+	/* What is our base endpointer? */
+	struct sctp_endpoint *ep;
+
+	struct sctp_bind_bucket *bind_hash;
+	/* Various Socket Options.  */
+	__u16 default_stream;
+	__u32 default_ppid;
+	__u16 default_flags;
+	__u32 default_context;
+	__u32 default_timetolive;
+	__u32 default_rcv_context;
+	int max_burst;
+
+	/* Heartbeat interval: The endpoint sends out a Heartbeat chunk to
+	 * the destination address every heartbeat interval. This value
+	 * will be inherited by all new associations.
+	 */
+	__u32 hbinterval;
+
+	/* This is the max_retrans value for new associations. */
+	__u16 pathmaxrxt;
+
+	/* The initial Path MTU to use for new associations. */
+	__u32 pathmtu;
+
+	/* The default SACK delay timeout for new associations. */
+	__u32 sackdelay;
+	__u32 sackfreq;
+
+	/* Flags controlling Heartbeat, SACK delay, and Path MTU Discovery. */
+	__u32 param_flags;
+
+	struct sctp_initmsg initmsg;
+	struct sctp_rtoinfo rtoinfo;
+	struct sctp_paddrparams paddrparam;
+	struct sctp_event_subscribe subscribe;
+	struct sctp_assocparams assocparams;
+	int user_frag;
+	__u32 autoclose;
+	__u8 nodelay;
+	__u8 disable_fragments;
+	__u8 v4mapped;
+	__u8 frag_interleave;
+	__u32 adaptation_ind;
+	__u32 pd_point;
+
+	atomic_t pd_mode;
+	/* Receive to here while partial delivery is in effect. */
+	struct sk_buff_head pd_lobby;
+	struct list_head auto_asconf_list;
+	int do_auto_asconf;
+};
+
+static inline struct sctp_sock *sctp_sk(const struct sock *sk)
+{
+       return (struct sctp_sock *)sk;
+}
+
+static inline struct sock *sctp_opt2sk(const struct sctp_sock *sp)
+{
+       return (struct sock *)sp;
+}
+
+#if IS_ENABLED(CONFIG_IPV6)
+struct sctp6_sock {
+       struct sctp_sock  sctp;
+       struct ipv6_pinfo inet6;
+};
+#endif /* CONFIG_IPV6 */
+
+
+/* This is our APPLICATION-SPECIFIC state cookie.
+ * THIS IS NOT DICTATED BY THE SPECIFICATION.
+ */
+/* These are the parts of an association which we send in the cookie.
+ * Most of these are straight out of:
+ * RFC2960 12.2 Parameters necessary per association (i.e. the TCB)
+ *
+ */
+
+struct sctp_cookie {
+
+	/* My	       : Tag expected in every inbound packet and sent
+	 * Verification: in the INIT or INIT ACK chunk.
+	 * Tag	       :
+	 */
+	__u32 my_vtag;
+
+	/* Peer's      : Tag expected in every outbound packet except
+	 * Verification: in the INIT chunk.
+	 * Tag	       :
+	 */
+	__u32 peer_vtag;
+
+	/* The rest of these are not from the spec, but really need to
+	 * be in the cookie.
+	 */
+
+	/* My Tie Tag  : Assist in discovering a restarting association. */
+	__u32 my_ttag;
+
+	/* Peer's Tie Tag: Assist in discovering a restarting association. */
+	__u32 peer_ttag;
+
+	/* When does this cookie expire? */
+	struct timeval expiration;
+
+	/* Number of inbound/outbound streams which are set
+	 * and negotiated during the INIT process.
+	 */
+	__u16 sinit_num_ostreams;
+	__u16 sinit_max_instreams;
+
+	/* This is the first sequence number I used.  */
+	__u32 initial_tsn;
+
+	/* This holds the originating address of the INIT packet.  */
+	union sctp_addr peer_addr;
+
+	/* IG Section 2.35.3 
+	 * Include the source port of the INIT-ACK
+	 */
+	__u16		my_port;
+
+	__u8 prsctp_capable;
+
+	/* Padding for future use */
+	__u8 padding;  		
+
+	__u32 adaptation_ind;
+
+	__u8 auth_random[sizeof(sctp_paramhdr_t) + SCTP_AUTH_RANDOM_LENGTH];
+	__u8 auth_hmacs[SCTP_AUTH_NUM_HMACS * sizeof(__u16) + 2];
+	__u8 auth_chunks[sizeof(sctp_paramhdr_t) + SCTP_AUTH_MAX_CHUNKS];
+
+	/* This is a shim for my peer's INIT packet, followed by
+	 * a copy of the raw address list of the association.
+	 * The length of the raw address list is saved in the
+	 * raw_addr_list_len field, which will be used at the time when
+	 * the association TCB is re-constructed from the cookie.
+	 */
+	__u32 raw_addr_list_len;
+	struct sctp_init_chunk peer_init[0];
+};
+
+
+/* The format of our cookie that we send to our peer. */
+struct sctp_signed_cookie {
+	__u8 signature[SCTP_SECRET_SIZE];
+	__u32 __pad;		/* force sctp_cookie alignment to 64 bits */
+	struct sctp_cookie c;
+} __packed;
+
+/* This is another convenience type to allocate memory for address
+ * params for the maximum size and pass such structures around
+ * internally.
+ */
+union sctp_addr_param {
+	struct sctp_paramhdr p;
+	struct sctp_ipv4addr_param v4;
+	struct sctp_ipv6addr_param v6;
+};
+
+/* A convenience type to allow walking through the various
+ * parameters and avoid casting all over the place.
+ */
+union sctp_params {
+	void *v;
+	struct sctp_paramhdr *p;
+	struct sctp_cookie_preserve_param *life;
+	struct sctp_hostname_param *dns;
+	struct sctp_cookie_param *cookie;
+	struct sctp_supported_addrs_param *sat;
+	struct sctp_ipv4addr_param *v4;
+	struct sctp_ipv6addr_param *v6;
+	union sctp_addr_param *addr;
+	struct sctp_adaptation_ind_param *aind;
+	struct sctp_supported_ext_param *ext;
+	struct sctp_random_param *random;
+	struct sctp_chunks_param *chunks;
+	struct sctp_hmac_algo_param *hmac_algo;
+	struct sctp_addip_param *addip;
+};
+
+/* RFC 2960.  Section 3.3.5 Heartbeat.
+ *    Heartbeat Information: variable length
+ *    The Sender-specific Heartbeat Info field should normally include
+ *    information about the sender's current time when this HEARTBEAT
+ *    chunk is sent and the destination transport address to which this
+ *    HEARTBEAT is sent (see Section 8.3).
+ */
+typedef struct sctp_sender_hb_info {
+	struct sctp_paramhdr param_hdr;
+	union sctp_addr daddr;
+	unsigned long sent_at;
+	__u64 hb_nonce;
+} __packed sctp_sender_hb_info_t;
+
+/*
+ *  RFC 2960 1.3.2 Sequenced Delivery within Streams
+ *
+ *  The term "stream" is used in SCTP to refer to a sequence of user
+ *  messages that are to be delivered to the upper-layer protocol in
+ *  order with respect to other messages within the same stream.  This is
+ *  in contrast to its usage in TCP, where it refers to a sequence of
+ *  bytes (in this document a byte is assumed to be eight bits).
+ *  ...
+ *
+ *  This is the structure we use to track both our outbound and inbound
+ *  SSN, or Stream Sequence Numbers.
+ */
+
+struct sctp_stream {
+	__u16 *ssn;
+	unsigned int len;
+};
+
+struct sctp_ssnmap {
+	struct sctp_stream in;
+	struct sctp_stream out;
+	int malloced;
+};
+
+struct sctp_ssnmap *sctp_ssnmap_new(__u16 in, __u16 out,
+				    gfp_t gfp);
+void sctp_ssnmap_free(struct sctp_ssnmap *map);
+void sctp_ssnmap_clear(struct sctp_ssnmap *map);
+
+/* What is the current SSN number for this stream? */
+static inline __u16 sctp_ssn_peek(struct sctp_stream *stream, __u16 id)
+{
+	return stream->ssn[id];
+}
+
+/* Return the next SSN number for this stream.	*/
+static inline __u16 sctp_ssn_next(struct sctp_stream *stream, __u16 id)
+{
+	return stream->ssn[id]++;
+}
+
+/* Skip over this ssn and all below. */
+static inline void sctp_ssn_skip(struct sctp_stream *stream, __u16 id, 
+				 __u16 ssn)
+{
+	stream->ssn[id] = ssn+1;
+}
+              
+/*
+ * Pointers to address related SCTP functions.
+ * (i.e. things that depend on the address family.)
+ */
+struct sctp_af {
+	int		(*sctp_xmit)	(struct sk_buff *skb,
+					 struct sctp_transport *);
+	int		(*setsockopt)	(struct sock *sk,
+					 int level,
+					 int optname,
+					 char __user *optval,
+					 unsigned int optlen);
+	int		(*getsockopt)	(struct sock *sk,
+					 int level,
+					 int optname,
+					 char __user *optval,
+					 int __user *optlen);
+	int		(*compat_setsockopt)	(struct sock *sk,
+					 int level,
+					 int optname,
+					 char __user *optval,
+					 unsigned int optlen);
+	int		(*compat_getsockopt)	(struct sock *sk,
+					 int level,
+					 int optname,
+					 char __user *optval,
+					 int __user *optlen);
+	void		(*get_dst)	(struct sctp_transport *t,
+					 union sctp_addr *saddr,
+					 struct flowi *fl,
+					 struct sock *sk);
+	void		(*get_saddr)	(struct sctp_sock *sk,
+					 struct sctp_transport *t,
+					 struct flowi *fl);
+	void		(*copy_addrlist) (struct list_head *,
+					  struct net_device *);
+	int		(*cmp_addr)	(const union sctp_addr *addr1,
+					 const union sctp_addr *addr2);
+	void		(*addr_copy)	(union sctp_addr *dst,
+					 union sctp_addr *src);
+	void		(*from_skb)	(union sctp_addr *,
+					 struct sk_buff *skb,
+					 int saddr);
+	void		(*from_sk)	(union sctp_addr *,
+					 struct sock *sk);
+	void		(*to_sk_saddr)	(union sctp_addr *,
+					 struct sock *sk);
+	void		(*to_sk_daddr)	(union sctp_addr *,
+					 struct sock *sk);
+	void		(*from_addr_param) (union sctp_addr *,
+					    union sctp_addr_param *,
+					    __be16 port, int iif);
+	int		(*to_addr_param) (const union sctp_addr *,
+					  union sctp_addr_param *); 
+	int		(*addr_valid)	(union sctp_addr *,
+					 struct sctp_sock *,
+					 const struct sk_buff *);
+	sctp_scope_t	(*scope) (union sctp_addr *);
+	void		(*inaddr_any)	(union sctp_addr *, __be16);
+	int		(*is_any)	(const union sctp_addr *);
+	int		(*available)	(union sctp_addr *,
+					 struct sctp_sock *);
+	int		(*skb_iif)	(const struct sk_buff *sk);
+	int		(*is_ce)	(const struct sk_buff *sk);
+	void		(*seq_dump_addr)(struct seq_file *seq,
+					 union sctp_addr *addr);
+	void		(*ecn_capable)(struct sock *sk);
+	__u16		net_header_len;
+	int		sockaddr_len;
+	sa_family_t	sa_family;
+	struct list_head list;
+};
+
+struct sctp_af *sctp_get_af_specific(sa_family_t);
+int sctp_register_af(struct sctp_af *);
+
+/* Protocol family functions. */
+struct sctp_pf {
+	void (*event_msgname)(struct sctp_ulpevent *, char *, int *);
+	void (*skb_msgname)  (struct sk_buff *, char *, int *);
+	int  (*af_supported) (sa_family_t, struct sctp_sock *);
+	int  (*cmp_addr) (const union sctp_addr *,
+			  const union sctp_addr *,
+			  struct sctp_sock *);
+	int  (*bind_verify) (struct sctp_sock *, union sctp_addr *);
+	int  (*send_verify) (struct sctp_sock *, union sctp_addr *);
+	int  (*supported_addrs)(const struct sctp_sock *, __be16 *);
+	struct sock *(*create_accept_sk) (struct sock *sk,
+					  struct sctp_association *asoc);
+	void (*addr_v4map) (struct sctp_sock *, union sctp_addr *);
+	struct sctp_af *af;
+};
+
+
+/* Structure to track chunk fragments that have been acked, but peer
+ * fragments of the same message have not.
+ */
+struct sctp_datamsg {
+	/* Chunks waiting to be submitted to lower layer. */
+	struct list_head chunks;
+	/* Reference counting. */
+	atomic_t refcnt;
+	/* When is this message no longer interesting to the peer? */
+	unsigned long expires_at;
+	/* Did the messenge fail to send? */
+	int send_error;
+	u8 send_failed:1,
+	   can_abandon:1,   /* can chunks from this message can be abandoned. */
+	   can_delay;	    /* should this message be Nagle delayed */
+};
+
+struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *,
+					    struct sctp_sndrcvinfo *,
+					    struct msghdr *, int len);
+void sctp_datamsg_free(struct sctp_datamsg *);
+void sctp_datamsg_put(struct sctp_datamsg *);
+void sctp_chunk_fail(struct sctp_chunk *, int error);
+int sctp_chunk_abandoned(struct sctp_chunk *);
+
+/* RFC2960 1.4 Key Terms
+ *
+ * o Chunk: A unit of information within an SCTP packet, consisting of
+ * a chunk header and chunk-specific content.
+ *
+ * As a matter of convenience, we remember the SCTP common header for
+ * each chunk as well as a few other header pointers...
+ */
+struct sctp_chunk {
+	struct list_head list;
+
+	atomic_t refcnt;
+
+	/* This is our link to the per-transport transmitted list.  */
+	struct list_head transmitted_list;
+
+	/* This field is used by chunks that hold fragmented data.
+	 * For the first fragment this is the list that holds the rest of
+	 * fragments. For the remaining fragments, this is the link to the
+	 * frag_list maintained in the first fragment.
+	 */
+	struct list_head frag_list;
+
+	/* This points to the sk_buff containing the actual data.  */
+	struct sk_buff *skb;
+
+	/* These are the SCTP headers by reverse order in a packet.
+	 * Note that some of these may happen more than once.  In that
+	 * case, we point at the "current" one, whatever that means
+	 * for that level of header.
+	 */
+
+	/* We point this at the FIRST TLV parameter to chunk_hdr.  */
+	union sctp_params param_hdr;
+	union {
+		__u8 *v;
+		struct sctp_datahdr *data_hdr;
+		struct sctp_inithdr *init_hdr;
+		struct sctp_sackhdr *sack_hdr;
+		struct sctp_heartbeathdr *hb_hdr;
+		struct sctp_sender_hb_info *hbs_hdr;
+		struct sctp_shutdownhdr *shutdown_hdr;
+		struct sctp_signed_cookie *cookie_hdr;
+		struct sctp_ecnehdr *ecne_hdr;
+		struct sctp_cwrhdr *ecn_cwr_hdr;
+		struct sctp_errhdr *err_hdr;
+		struct sctp_addiphdr *addip_hdr;
+		struct sctp_fwdtsn_hdr *fwdtsn_hdr;
+		struct sctp_authhdr *auth_hdr;
+	} subh;
+
+	__u8 *chunk_end;
+
+	struct sctp_chunkhdr *chunk_hdr;
+	struct sctphdr *sctp_hdr;
+
+	/* This needs to be recoverable for SCTP_SEND_FAILED events. */
+	struct sctp_sndrcvinfo sinfo;
+
+	/* Which association does this belong to?  */
+	struct sctp_association *asoc;
+
+	/* What endpoint received this chunk? */
+	struct sctp_ep_common *rcvr;
+
+	/* We fill this in if we are calculating RTT. */
+	unsigned long sent_at;
+
+	/* What is the origin IP address for this chunk?  */
+	union sctp_addr source;
+	/* Destination address for this chunk. */
+	union sctp_addr dest;
+
+	/* For outbound message, track all fragments for SEND_FAILED. */
+	struct sctp_datamsg *msg;
+
+	/* For an inbound chunk, this tells us where it came from.
+	 * For an outbound chunk, it tells us where we'd like it to
+	 * go.	It is NULL if we have no preference.
+	 */
+	struct sctp_transport *transport;
+
+	/* SCTP-AUTH:  For the special case inbound processing of COOKIE-ECHO
+	 * we need save a pointer to the AUTH chunk, since the SCTP-AUTH
+	 * spec violates the principle premis that all chunks are processed
+	 * in order.
+	 */
+	struct sk_buff *auth_chunk;
+
+#define SCTP_CAN_FRTX 0x0
+#define SCTP_NEED_FRTX 0x1
+#define SCTP_DONT_FRTX 0x2
+	__u16	rtt_in_progress:1,	/* This chunk used for RTT calc? */
+		has_tsn:1,		/* Does this chunk have a TSN yet? */
+		has_ssn:1,		/* Does this chunk have a SSN yet? */
+		singleton:1,		/* Only chunk in the packet? */
+		end_of_packet:1,	/* Last chunk in the packet? */
+		ecn_ce_done:1,		/* Have we processed the ECN CE bit? */
+		pdiscard:1,		/* Discard the whole packet now? */
+		tsn_gap_acked:1,	/* Is this chunk acked by a GAP ACK? */
+		data_accepted:1,	/* At least 1 chunk accepted */
+		auth:1,			/* IN: was auth'ed | OUT: needs auth */
+		has_asconf:1,		/* IN: have seen an asconf before */
+		tsn_missing_report:2,	/* Data chunk missing counter. */
+		fast_retransmit:2;	/* Is this chunk fast retransmitted? */
+};
+
+void sctp_chunk_hold(struct sctp_chunk *);
+void sctp_chunk_put(struct sctp_chunk *);
+int sctp_user_addto_chunk(struct sctp_chunk *chunk, int off, int len,
+			  struct iovec *data);
+void sctp_chunk_free(struct sctp_chunk *);
+void  *sctp_addto_chunk(struct sctp_chunk *, int len, const void *data);
+void  *sctp_addto_chunk_fixed(struct sctp_chunk *, int len, const void *data);
+struct sctp_chunk *sctp_chunkify(struct sk_buff *,
+				 const struct sctp_association *,
+				 struct sock *);
+void sctp_init_addrs(struct sctp_chunk *, union sctp_addr *,
+		     union sctp_addr *);
+const union sctp_addr *sctp_source(const struct sctp_chunk *chunk);
+
+enum {
+	SCTP_ADDR_NEW,		/* new address added to assoc/ep */
+	SCTP_ADDR_SRC,		/* address can be used as source */
+	SCTP_ADDR_DEL,		/* address about to be deleted */
+};
+
+/* This is a structure for holding either an IPv6 or an IPv4 address.  */
+struct sctp_sockaddr_entry {
+	struct list_head list;
+	struct rcu_head	rcu;
+	union sctp_addr a;
+	__u8 state;
+	__u8 valid;
+};
+
+#define SCTP_ADDRESS_TICK_DELAY	500
+
+typedef struct sctp_chunk *(sctp_packet_phandler_t)(struct sctp_association *);
+
+/* This structure holds lists of chunks as we are assembling for
+ * transmission.
+ */
+struct sctp_packet {
+	/* These are the SCTP header values (host order) for the packet. */
+	__u16 source_port;
+	__u16 destination_port;
+	__u32 vtag;
+
+	/* This contains the payload chunks.  */
+	struct list_head chunk_list;
+
+	/* This is the overhead of the sctp and ip headers. */
+	size_t overhead;
+	/* This is the total size of all chunks INCLUDING padding.  */
+	size_t size;
+
+	/* The packet is destined for this transport address.
+	 * The function we finally use to pass down to the next lower
+	 * layer lives in the transport structure.
+	 */
+	struct sctp_transport *transport;
+
+	/* pointer to the auth chunk for this packet */
+	struct sctp_chunk *auth;
+
+	u8  has_cookie_echo:1,	/* This packet contains a COOKIE-ECHO chunk. */
+	    has_sack:1,		/* This packet contains a SACK chunk. */
+	    has_auth:1,		/* This packet contains an AUTH chunk */
+	    has_data:1,		/* This packet contains at least 1 DATA chunk */
+	    ipfragok:1,		/* So let ip fragment this packet */
+	    malloced:1;		/* Is it malloced? */
+};
+
+struct sctp_packet *sctp_packet_init(struct sctp_packet *,
+				     struct sctp_transport *,
+				     __u16 sport, __u16 dport);
+struct sctp_packet *sctp_packet_config(struct sctp_packet *, __u32 vtag, int);
+sctp_xmit_t sctp_packet_transmit_chunk(struct sctp_packet *,
+                                       struct sctp_chunk *, int);
+sctp_xmit_t sctp_packet_append_chunk(struct sctp_packet *,
+                                     struct sctp_chunk *);
+int sctp_packet_transmit(struct sctp_packet *);
+void sctp_packet_free(struct sctp_packet *);
+
+static inline int sctp_packet_empty(struct sctp_packet *packet)
+{
+	return packet->size == packet->overhead;
+}
+
+/* This represents a remote transport address.
+ * For local transport addresses, we just use union sctp_addr.
+ *
+ * RFC2960 Section 1.4 Key Terms
+ *
+ *   o	Transport address:  A Transport Address is traditionally defined
+ *	by Network Layer address, Transport Layer protocol and Transport
+ *	Layer port number.  In the case of SCTP running over IP, a
+ *	transport address is defined by the combination of an IP address
+ *	and an SCTP port number (where SCTP is the Transport protocol).
+ *
+ * RFC2960 Section 7.1 SCTP Differences from TCP Congestion control
+ *
+ *   o	The sender keeps a separate congestion control parameter set for
+ *	each of the destination addresses it can send to (not each
+ *	source-destination pair but for each destination).  The parameters
+ *	should decay if the address is not used for a long enough time
+ *	period.
+ *
+ */
+struct sctp_transport {
+	/* A list of transports. */
+	struct list_head transports;
+
+	/* Reference counting. */
+	atomic_t refcnt;
+	__u32	 dead:1,
+		/* RTO-Pending : A flag used to track if one of the DATA
+		 *		chunks sent to this address is currently being
+		 *		used to compute a RTT. If this flag is 0,
+		 *		the next DATA chunk sent to this destination
+		 *		should be used to compute a RTT and this flag
+		 *		should be set. Every time the RTT
+		 *		calculation completes (i.e. the DATA chunk
+		 *		is SACK'd) clear this flag.
+		 */
+		 rto_pending:1,
+
+		/*
+		 * hb_sent : a flag that signals that we have a pending
+		 * heartbeat.
+		 */
+		hb_sent:1,
+
+		/* Is the Path MTU update pending on this tranport */
+		pmtu_pending:1,
+
+		/* Is this structure kfree()able? */
+		malloced:1;
+
+	struct flowi fl;
+
+	/* This is the peer's IP address and port. */
+	union sctp_addr ipaddr;
+
+	/* These are the functions we call to handle LLP stuff.	 */
+	struct sctp_af *af_specific;
+
+	/* Which association do we belong to?  */
+	struct sctp_association *asoc;
+
+	/* RFC2960
+	 *
+	 * 12.3 Per Transport Address Data
+	 *
+	 * For each destination transport address in the peer's
+	 * address list derived from the INIT or INIT ACK chunk, a
+	 * number of data elements needs to be maintained including:
+	 */
+	/* RTO	       : The current retransmission timeout value.  */
+	unsigned long rto;
+
+	__u32 rtt;		/* This is the most recent RTT.	 */
+
+	/* RTTVAR      : The current RTT variation.  */
+	__u32 rttvar;
+
+	/* SRTT	       : The current smoothed round trip time.	*/
+	__u32 srtt;
+
+	/*
+	 * These are the congestion stats.
+	 */
+	/* cwnd	       : The current congestion window.	 */
+	__u32 cwnd;		  /* This is the actual cwnd.  */
+
+	/* ssthresh    : The current slow start threshold value.  */
+	__u32 ssthresh;
+
+	/* partial     : The tracking method for increase of cwnd when in
+	 * bytes acked : congestion avoidance mode (see Section 6.2.2)
+	 */
+	__u32 partial_bytes_acked;
+
+	/* Data that has been sent, but not acknowledged. */
+	__u32 flight_size;
+
+	__u32 burst_limited;	/* Holds old cwnd when max.burst is applied */
+
+	/* Destination */
+	struct dst_entry *dst;
+	/* Source address. */
+	union sctp_addr saddr;
+
+	/* Heartbeat interval: The endpoint sends out a Heartbeat chunk to
+	 * the destination address every heartbeat interval.
+	 */
+	unsigned long hbinterval;
+
+	/* SACK delay timeout */
+	unsigned long sackdelay;
+	__u32 sackfreq;
+
+	/* When was the last time (in jiffies) that we heard from this
+	 * transport?  We use this to pick new active and retran paths.
+	 */
+	unsigned long last_time_heard;
+
+	/* Last time(in jiffies) when cwnd is reduced due to the congestion
+	 * indication based on ECNE chunk.
+	 */
+	unsigned long last_time_ecne_reduced;
+
+	/* This is the max_retrans value for the transport and will
+	 * be initialized from the assocs value.  This can be changed
+	 * using SCTP_SET_PEER_ADDR_PARAMS socket option.
+	 */
+	__u16 pathmaxrxt;
+
+	/* PMTU	      : The current known path MTU.  */
+	__u32 pathmtu;
+
+	/* Flags controlling Heartbeat, SACK delay, and Path MTU Discovery. */
+	__u32 param_flags;
+
+	/* The number of times INIT has been sent on this transport. */
+	int init_sent_count;
+
+	/* state       : The current state of this destination,
+	 *             : i.e. SCTP_ACTIVE, SCTP_INACTIVE, SCTP_UNKNOWN.
+	 */
+	int state;
+
+	/* These are the error stats for this destination.  */
+
+	/* Error count : The current error count for this destination.	*/
+	unsigned short error_count;
+
+	/* Per	       : A timer used by each destination.
+	 * Destination :
+	 * Timer       :
+	 *
+	 * [Everywhere else in the text this is called T3-rtx. -ed]
+	 */
+	struct timer_list T3_rtx_timer;
+
+	/* Heartbeat timer is per destination. */
+	struct timer_list hb_timer;
+
+	/* Timer to handle ICMP proto unreachable envets */
+	struct timer_list proto_unreach_timer;
+
+	/* Since we're using per-destination retransmission timers
+	 * (see above), we're also using per-destination "transmitted"
+	 * queues.  This probably ought to be a private struct
+	 * accessible only within the outqueue, but it's not, yet.
+	 */
+	struct list_head transmitted;
+
+	/* We build bundle-able packets for this transport here.  */
+	struct sctp_packet packet;
+
+	/* This is the list of transports that have chunks to send.  */
+	struct list_head send_ready;
+
+	/* State information saved for SFR_CACC algorithm. The key
+	 * idea in SFR_CACC is to maintain state at the sender on a
+	 * per-destination basis when a changeover happens.
+	 *	char changeover_active;
+	 *	char cycling_changeover;
+	 *	__u32 next_tsn_at_change;
+	 *	char cacc_saw_newack;
+	 */
+	struct {
+		/* An unsigned integer, which stores the next TSN to be
+		 * used by the sender, at the moment of changeover.
+		 */
+		__u32 next_tsn_at_change;
+
+		/* A flag which indicates the occurrence of a changeover */
+		char changeover_active;
+
+		/* A flag which indicates whether the change of primary is
+		 * the first switch to this destination address during an
+		 * active switch.
+		 */
+		char cycling_changeover;
+
+		/* A temporary flag, which is used during the processing of
+		 * a SACK to estimate the causative TSN(s)'s group.
+		 */
+		char cacc_saw_newack;
+	} cacc;
+
+	/* 64-bit random number sent with heartbeat. */
+	__u64 hb_nonce;
+};
+
+struct sctp_transport *sctp_transport_new(const union sctp_addr *,
+					  gfp_t);
+void sctp_transport_set_owner(struct sctp_transport *,
+			      struct sctp_association *);
+void sctp_transport_route(struct sctp_transport *, union sctp_addr *,
+			  struct sctp_sock *);
+void sctp_transport_pmtu(struct sctp_transport *, struct sock *sk);
+void sctp_transport_free(struct sctp_transport *);
+void sctp_transport_reset_timers(struct sctp_transport *);
+void sctp_transport_hold(struct sctp_transport *);
+void sctp_transport_put(struct sctp_transport *);
+void sctp_transport_update_rto(struct sctp_transport *, __u32);
+void sctp_transport_raise_cwnd(struct sctp_transport *, __u32, __u32);
+void sctp_transport_lower_cwnd(struct sctp_transport *, sctp_lower_cwnd_t);
+void sctp_transport_burst_limited(struct sctp_transport *);
+void sctp_transport_burst_reset(struct sctp_transport *);
+unsigned long sctp_transport_timeout(struct sctp_transport *);
+void sctp_transport_reset(struct sctp_transport *);
+void sctp_transport_update_pmtu(struct sctp_transport *, u32);
+void sctp_transport_immediate_rtx(struct sctp_transport *);
+
+
+/* This is the structure we use to queue packets as they come into
+ * SCTP.  We write packets to it and read chunks from it.
+ */
+struct sctp_inq {
+	/* This is actually a queue of sctp_chunk each
+	 * containing a partially decoded packet.
+	 */
+	struct list_head in_chunk_list;
+	/* This is the packet which is currently off the in queue and is
+	 * being worked on through the inbound chunk processing.
+	 */
+	struct sctp_chunk *in_progress;
+
+	/* This is the delayed task to finish delivering inbound
+	 * messages.
+	 */
+	struct work_struct immediate;
+
+	int malloced;	     /* Is this structure kfree()able?	*/
+};
+
+void sctp_inq_init(struct sctp_inq *);
+void sctp_inq_free(struct sctp_inq *);
+void sctp_inq_push(struct sctp_inq *, struct sctp_chunk *packet);
+struct sctp_chunk *sctp_inq_pop(struct sctp_inq *);
+struct sctp_chunkhdr *sctp_inq_peek(struct sctp_inq *);
+void sctp_inq_set_th_handler(struct sctp_inq *, work_func_t);
+
+/* This is the structure we use to hold outbound chunks.  You push
+ * chunks in and they automatically pop out the other end as bundled
+ * packets (it calls (*output_handler)()).
+ *
+ * This structure covers sections 6.3, 6.4, 6.7, 6.8, 6.10, 7., 8.1,
+ * and 8.2 of the v13 draft.
+ *
+ * It handles retransmissions.	The connection to the timeout portion
+ * of the state machine is through sctp_..._timeout() and timeout_handler.
+ *
+ * If you feed it SACKs, it will eat them.
+ *
+ * If you give it big chunks, it will fragment them.
+ *
+ * It assigns TSN's to data chunks.  This happens at the last possible
+ * instant before transmission.
+ *
+ * When free()'d, it empties itself out via output_handler().
+ */
+struct sctp_outq {
+	struct sctp_association *asoc;
+
+	/* Data pending that has never been transmitted.  */
+	struct list_head out_chunk_list;
+
+	unsigned out_qlen;	/* Total length of queued data chunks. */
+
+	/* Error of send failed, may used in SCTP_SEND_FAILED event. */
+	unsigned error;
+
+	/* These are control chunks we want to send.  */
+	struct list_head control_chunk_list;
+
+	/* These are chunks that have been sacked but are above the
+	 * CTSN, or cumulative tsn ack point.
+	 */
+	struct list_head sacked;
+
+	/* Put chunks on this list to schedule them for
+	 * retransmission.
+	 */
+	struct list_head retransmit;
+
+	/* Put chunks on this list to save them for FWD TSN processing as
+	 * they were abandoned.
+	 */
+	struct list_head abandoned;
+
+	/* How many unackd bytes do we have in-flight?	*/
+	__u32 outstanding_bytes;
+
+	/* Are we doing fast-rtx on this queue */
+	char fast_rtx;
+
+	/* Corked? */
+	char cork;
+
+	/* Is this structure empty?  */
+	char empty;
+
+	/* Are we kfree()able? */
+	char malloced;
+};
+
+void sctp_outq_init(struct sctp_association *, struct sctp_outq *);
+void sctp_outq_teardown(struct sctp_outq *);
+void sctp_outq_free(struct sctp_outq*);
+int sctp_outq_tail(struct sctp_outq *, struct sctp_chunk *chunk);
+int sctp_outq_sack(struct sctp_outq *, struct sctp_sackhdr *);
+int sctp_outq_is_empty(const struct sctp_outq *);
+void sctp_outq_restart(struct sctp_outq *);
+
+void sctp_retransmit(struct sctp_outq *, struct sctp_transport *,
+		     sctp_retransmit_reason_t);
+void sctp_retransmit_mark(struct sctp_outq *, struct sctp_transport *, __u8);
+int sctp_outq_uncork(struct sctp_outq *);
+/* Uncork and flush an outqueue.  */
+static inline void sctp_outq_cork(struct sctp_outq *q)
+{
+	q->cork = 1;
+}
+
+/* These bind address data fields common between endpoints and associations */
+struct sctp_bind_addr {
+
+	/* RFC 2960 12.1 Parameters necessary for the SCTP instance
+	 *
+	 * SCTP Port:	The local SCTP port number the endpoint is
+	 *		bound to.
+	 */
+	__u16 port;
+
+	/* RFC 2960 12.1 Parameters necessary for the SCTP instance
+	 *
+	 * Address List: The list of IP addresses that this instance
+	 *	has bound.  This information is passed to one's
+	 *	peer(s) in INIT and INIT ACK chunks.
+	 */
+	struct list_head address_list;
+
+	int malloced;	     /* Are we kfree()able?  */
+};
+
+void sctp_bind_addr_init(struct sctp_bind_addr *, __u16 port);
+void sctp_bind_addr_free(struct sctp_bind_addr *);
+int sctp_bind_addr_copy(struct sctp_bind_addr *dest,
+			const struct sctp_bind_addr *src,
+			sctp_scope_t scope, gfp_t gfp,
+			int flags);
+int sctp_bind_addr_dup(struct sctp_bind_addr *dest,
+			const struct sctp_bind_addr *src,
+			gfp_t gfp);
+int sctp_add_bind_addr(struct sctp_bind_addr *, union sctp_addr *,
+		       __u8 addr_state, gfp_t gfp);
+int sctp_del_bind_addr(struct sctp_bind_addr *, union sctp_addr *);
+int sctp_bind_addr_match(struct sctp_bind_addr *, const union sctp_addr *,
+			 struct sctp_sock *);
+int sctp_bind_addr_conflict(struct sctp_bind_addr *, const union sctp_addr *,
+			 struct sctp_sock *, struct sctp_sock *);
+int sctp_bind_addr_state(const struct sctp_bind_addr *bp,
+			 const union sctp_addr *addr);
+union sctp_addr *sctp_find_unmatch_addr(struct sctp_bind_addr	*bp,
+					const union sctp_addr	*addrs,
+					int			addrcnt,
+					struct sctp_sock	*opt);
+union sctp_params sctp_bind_addrs_to_raw(const struct sctp_bind_addr *bp,
+					 int *addrs_len,
+					 gfp_t gfp);
+int sctp_raw_to_bind_addrs(struct sctp_bind_addr *bp, __u8 *raw, int len,
+			   __u16 port, gfp_t gfp);
+
+sctp_scope_t sctp_scope(const union sctp_addr *);
+int sctp_in_scope(const union sctp_addr *addr, const sctp_scope_t scope);
+int sctp_is_any(struct sock *sk, const union sctp_addr *addr);
+int sctp_addr_is_valid(const union sctp_addr *addr);
+int sctp_is_ep_boundall(struct sock *sk);
+
+
+/* What type of endpoint?  */
+typedef enum {
+	SCTP_EP_TYPE_SOCKET,
+	SCTP_EP_TYPE_ASSOCIATION,
+} sctp_endpoint_type_t;
+
+/*
+ * A common base class to bridge the implmentation view of a
+ * socket (usually listening) endpoint versus an association's
+ * local endpoint.
+ * This common structure is useful for several purposes:
+ *   1) Common interface for lookup routines.
+ *	a) Subfunctions work for either endpoint or association
+ *	b) Single interface to lookup allows hiding the lookup lock rather
+ *	   than acquiring it externally.
+ *   2) Common interface for the inbound chunk handling/state machine.
+ *   3) Common object handling routines for reference counting, etc.
+ *   4) Disentangle association lookup from endpoint lookup, where we
+ *	do not have to find our endpoint to find our association.
+ *
+ */
+
+struct sctp_ep_common {
+	/* Fields to help us manage our entries in the hash tables. */
+	struct hlist_node node;
+	int hashent;
+
+	/* Runtime type information.  What kind of endpoint is this? */
+	sctp_endpoint_type_t type;
+
+	/* Some fields to help us manage this object.
+	 *   refcnt   - Reference count access to this object.
+	 *   dead     - Do not attempt to use this object.
+	 *   malloced - Do we need to kfree this object?
+	 */
+	atomic_t    refcnt;
+	char	    dead;
+	char	    malloced;
+
+	/* What socket does this endpoint belong to?  */
+	struct sock *sk;
+
+	/* This is where we receive inbound chunks.  */
+	struct sctp_inq	  inqueue;
+
+	/* This substructure includes the defining parameters of the
+	 * endpoint:
+	 * bind_addr.port is our shared port number.
+	 * bind_addr.address_list is our set of local IP addresses.
+	 */
+	struct sctp_bind_addr bind_addr;
+};
+
+
+/* RFC Section 1.4 Key Terms
+ *
+ * o SCTP endpoint: The logical sender/receiver of SCTP packets. On a
+ *   multi-homed host, an SCTP endpoint is represented to its peers as a
+ *   combination of a set of eligible destination transport addresses to
+ *   which SCTP packets can be sent and a set of eligible source
+ *   transport addresses from which SCTP packets can be received.
+ *   All transport addresses used by an SCTP endpoint must use the
+ *   same port number, but can use multiple IP addresses. A transport
+ *   address used by an SCTP endpoint must not be used by another
+ *   SCTP endpoint. In other words, a transport address is unique
+ *   to an SCTP endpoint.
+ *
+ * From an implementation perspective, each socket has one of these.
+ * A TCP-style socket will have exactly one association on one of
+ * these.  An UDP-style socket will have multiple associations hanging
+ * off one of these.
+ */
+
+struct sctp_endpoint {
+	/* Common substructure for endpoint and association. */
+	struct sctp_ep_common base;
+
+	/* Associations: A list of current associations and mappings
+	 *	      to the data consumers for each association. This
+	 *	      may be in the form of a hash table or other
+	 *	      implementation dependent structure. The data
+	 *	      consumers may be process identification
+	 *	      information such as file descriptors, named pipe
+	 *	      pointer, or table pointers dependent on how SCTP
+	 *	      is implemented.
+	 */
+	/* This is really a list of struct sctp_association entries. */
+	struct list_head asocs;
+
+	/* Secret Key: A secret key used by this endpoint to compute
+	 *	      the MAC.	This SHOULD be a cryptographic quality
+	 *	      random number with a sufficient length.
+	 *	      Discussion in [RFC1750] can be helpful in
+	 *	      selection of the key.
+	 */
+	__u8 secret_key[SCTP_HOW_MANY_SECRETS][SCTP_SECRET_SIZE];
+	int current_key;
+	int last_key;
+	int key_changed_at;
+
+ 	/* digest:  This is a digest of the sctp cookie.  This field is
+ 	 * 	    only used on the receive path when we try to validate
+ 	 * 	    that the cookie has not been tampered with.  We put
+ 	 * 	    this here so we pre-allocate this once and can re-use
+ 	 * 	    on every receive.
+ 	 */
+ 	__u8 *digest;
+ 
+	/* sendbuf acct. policy.	*/
+	__u32 sndbuf_policy;
+
+	/* rcvbuf acct. policy.	*/
+	__u32 rcvbuf_policy;
+
+	/* SCTP AUTH: array of the HMACs that will be allocated
+	 * we need this per association so that we don't serialize
+	 */
+	struct crypto_hash **auth_hmacs;
+
+	/* SCTP-AUTH: hmacs for the endpoint encoded into parameter */
+	 struct sctp_hmac_algo_param *auth_hmacs_list;
+
+	/* SCTP-AUTH: chunks to authenticate encoded into parameter */
+	struct sctp_chunks_param *auth_chunk_list;
+
+	/* SCTP-AUTH: endpoint shared keys */
+	struct list_head endpoint_shared_keys;
+	__u16 active_key_id;
+};
+
+/* Recover the outter endpoint structure. */
+static inline struct sctp_endpoint *sctp_ep(struct sctp_ep_common *base)
+{
+	struct sctp_endpoint *ep;
+
+	ep = container_of(base, struct sctp_endpoint, base);
+	return ep;
+}
+
+/* These are function signatures for manipulating endpoints.  */
+struct sctp_endpoint *sctp_endpoint_new(struct sock *, gfp_t);
+void sctp_endpoint_free(struct sctp_endpoint *);
+void sctp_endpoint_put(struct sctp_endpoint *);
+void sctp_endpoint_hold(struct sctp_endpoint *);
+void sctp_endpoint_add_asoc(struct sctp_endpoint *, struct sctp_association *);
+struct sctp_association *sctp_endpoint_lookup_assoc(
+	const struct sctp_endpoint *ep,
+	const union sctp_addr *paddr,
+	struct sctp_transport **);
+int sctp_endpoint_is_peeled_off(struct sctp_endpoint *,
+				const union sctp_addr *);
+struct sctp_endpoint *sctp_endpoint_is_match(struct sctp_endpoint *,
+					const union sctp_addr *);
+int sctp_has_association(const union sctp_addr *laddr,
+			 const union sctp_addr *paddr);
+
+int sctp_verify_init(const struct sctp_association *asoc, sctp_cid_t,
+		     sctp_init_chunk_t *peer_init, struct sctp_chunk *chunk,
+		     struct sctp_chunk **err_chunk);
+int sctp_process_init(struct sctp_association *, struct sctp_chunk *chunk,
+		      const union sctp_addr *peer,
+		      sctp_init_chunk_t *init, gfp_t gfp);
+__u32 sctp_generate_tag(const struct sctp_endpoint *);
+__u32 sctp_generate_tsn(const struct sctp_endpoint *);
+
+struct sctp_inithdr_host {
+	__u32 init_tag;
+	__u32 a_rwnd;
+	__u16 num_outbound_streams;
+	__u16 num_inbound_streams;
+	__u32 initial_tsn;
+};
+
+/* RFC2960
+ *
+ * 12. Recommended Transmission Control Block (TCB) Parameters
+ *
+ * This section details a recommended set of parameters that should
+ * be contained within the TCB for an implementation. This section is
+ * for illustrative purposes and should not be deemed as requirements
+ * on an implementation or as an exhaustive list of all parameters
+ * inside an SCTP TCB. Each implementation may need its own additional
+ * parameters for optimization.
+ */
+
+
+/* Here we have information about each individual association. */
+struct sctp_association {
+
+	/* A base structure common to endpoint and association.
+	 * In this context, it represents the associations's view
+	 * of the local endpoint of the association.
+	 */
+	struct sctp_ep_common base;
+
+	/* Associations on the same socket. */
+	struct list_head asocs;
+
+	/* association id. */
+	sctp_assoc_t assoc_id;
+
+	/* This is our parent endpoint.	 */
+	struct sctp_endpoint *ep;
+
+	/* These are those association elements needed in the cookie.  */
+	struct sctp_cookie c;
+
+	/* This is all information about our peer.  */
+	struct {
+		/* rwnd
+		 *
+		 * Peer Rwnd   : Current calculated value of the peer's rwnd.
+		 */
+		__u32 rwnd;
+
+		/* transport_addr_list
+		 *
+		 * Peer	       : A list of SCTP transport addresses that the
+		 * Transport   : peer is bound to. This information is derived
+		 * Address     : from the INIT or INIT ACK and is used to
+		 * List	       : associate an inbound packet with a given
+		 *	       : association. Normally this information is
+		 *	       : hashed or keyed for quick lookup and access
+		 *	       : of the TCB.
+		 *	       : The list is also initialized with the list
+		 *	       : of addresses passed with the sctp_connectx()
+		 *	       : call.
+		 *
+		 * It is a list of SCTP_transport's.
+		 */
+		struct list_head transport_addr_list;
+
+		/* transport_count
+		 *
+		 * Peer        : A count of the number of peer addresses
+		 * Transport   : in the Peer Transport Address List.
+		 * Address     :
+		 * Count       :
+		 */
+		__u16 transport_count;
+
+		/* port
+		 *   The transport layer port number.
+		 */
+		__u16 port;
+
+		/* primary_path
+		 *
+		 * Primary     : This is the current primary destination
+		 * Path	       : transport address of the peer endpoint.  It
+		 *	       : may also specify a source transport address
+		 *	       : on this endpoint.
+		 *
+		 * All of these paths live on transport_addr_list.
+		 *
+		 * At the bakeoffs, we discovered that the intent of
+		 * primaryPath is that it only changes when the ULP
+		 * asks to have it changed.  We add the activePath to
+		 * designate the connection we are currently using to
+		 * transmit new data and most control chunks.
+		 */
+		struct sctp_transport *primary_path;
+
+		/* Cache the primary path address here, when we
+		 * need a an address for msg_name.
+		 */
+		union sctp_addr primary_addr;
+
+		/* active_path
+		 *   The path that we are currently using to
+		 *   transmit new data and most control chunks.
+		 */
+		struct sctp_transport *active_path;
+
+		/* retran_path
+		 *
+		 * RFC2960 6.4 Multi-homed SCTP Endpoints
+		 * ...
+		 * Furthermore, when its peer is multi-homed, an
+		 * endpoint SHOULD try to retransmit a chunk to an
+		 * active destination transport address that is
+		 * different from the last destination address to
+		 * which the DATA chunk was sent.
+		 */
+		struct sctp_transport *retran_path;
+
+		/* Pointer to last transport I have sent on.  */
+		struct sctp_transport *last_sent_to;
+
+		/* This is the last transport I have received DATA on.	*/
+		struct sctp_transport *last_data_from;
+
+		/*
+		 * Mapping  An array of bits or bytes indicating which out of
+		 * Array    order TSN's have been received (relative to the
+		 *	    Last Rcvd TSN). If no gaps exist, i.e. no out of
+		 *	    order packets have been received, this array
+		 *	    will be set to all zero. This structure may be
+		 *	    in the form of a circular buffer or bit array.
+		 *
+		 * Last Rcvd   : This is the last TSN received in
+		 * TSN	       : sequence. This value is set initially by
+		 *	       : taking the peer's Initial TSN, received in
+		 *	       : the INIT or INIT ACK chunk, and subtracting
+		 *	       : one from it.
+		 *
+		 * Throughout most of the specification this is called the
+		 * "Cumulative TSN ACK Point".	In this case, we
+		 * ignore the advice in 12.2 in favour of the term
+		 * used in the bulk of the text.  This value is hidden
+		 * in tsn_map--we get it by calling sctp_tsnmap_get_ctsn().
+		 */
+		struct sctp_tsnmap tsn_map;
+
+		/* Ack State   : This flag indicates if the next received
+		 *             : packet is to be responded to with a
+		 *             : SACK. This is initializedto 0.  When a packet
+		 *             : is received it is incremented. If this value
+		 *             : reaches 2 or more, a SACK is sent and the
+		 *             : value is reset to 0. Note: This is used only
+		 *             : when no DATA chunks are received out of
+		 *             : order.  When DATA chunks are out of order,
+		 *             : SACK's are not delayed (see Section 6).
+		 */
+		__u8    sack_needed;     /* Do we need to sack the peer? */
+		__u32	sack_cnt;
+
+		/* These are capabilities which our peer advertised.  */
+		__u8	ecn_capable:1,	    /* Can peer do ECN? */
+			ipv4_address:1,	    /* Peer understands IPv4 addresses? */
+			ipv6_address:1,	    /* Peer understands IPv6 addresses? */
+			hostname_address:1, /* Peer understands DNS addresses? */
+			asconf_capable:1,   /* Does peer support ADDIP? */
+			prsctp_capable:1,   /* Can peer do PR-SCTP? */
+			auth_capable:1;	    /* Is peer doing SCTP-AUTH? */
+
+		__u32   adaptation_ind;	 /* Adaptation Code point. */
+
+		/* This mask is used to disable sending the ASCONF chunk
+		 * with specified parameter to peer.
+		 */
+		__be16 addip_disabled_mask;
+
+		struct sctp_inithdr_host i;
+		int cookie_len;
+		void *cookie;
+
+		/* ADDIP Section 4.2 Upon reception of an ASCONF Chunk.
+		 * C1) ... "Peer-Serial-Number'. This value MUST be initialized to the
+		 * Initial TSN Value minus 1
+		 */
+		__u32 addip_serial;
+
+		/* SCTP-AUTH: We need to know pears random number, hmac list
+		 * and authenticated chunk list.  All that is part of the
+		 * cookie and these are just pointers to those locations
+		 */
+		sctp_random_param_t *peer_random;
+		sctp_chunks_param_t *peer_chunks;
+		sctp_hmac_algo_param_t *peer_hmacs;
+	} peer;
+
+	/* State       : A state variable indicating what state the
+	 *	       : association is in, i.e. COOKIE-WAIT,
+	 *	       : COOKIE-ECHOED, ESTABLISHED, SHUTDOWN-PENDING,
+	 *	       : SHUTDOWN-SENT, SHUTDOWN-RECEIVED, SHUTDOWN-ACK-SENT.
+	 *
+	 *		Note: No "CLOSED" state is illustrated since if a
+	 *		association is "CLOSED" its TCB SHOULD be removed.
+	 *
+	 *		In this implementation we DO have a CLOSED
+	 *		state which is used during initiation and shutdown.
+	 *
+	 *		State takes values from SCTP_STATE_*.
+	 */
+	sctp_state_t state;
+
+	/* The cookie life I award for any cookie.  */
+	struct timeval cookie_life;
+
+	/* Overall     : The overall association error count.
+	 * Error Count : [Clear this any time I get something.]
+	 */
+	int overall_error_count;
+
+	/* These are the association's initial, max, and min RTO values.
+	 * These values will be initialized by system defaults, but can
+	 * be modified via the SCTP_RTOINFO socket option.
+	 */
+	unsigned long rto_initial;
+	unsigned long rto_max;
+	unsigned long rto_min;
+
+	/* Maximum number of new data packets that can be sent in a burst.  */
+	int max_burst;
+
+	/* This is the max_retrans value for the association.  This value will
+	 * be initialized initialized from system defaults, but can be
+	 * modified by the SCTP_ASSOCINFO socket option.
+	 */
+	int max_retrans;
+
+	/* Maximum number of times the endpoint will retransmit INIT  */
+	__u16 max_init_attempts;
+
+	/* How many times have we resent an INIT? */
+	__u16 init_retries;
+
+	/* The largest timeout or RTO value to use in attempting an INIT */
+	unsigned long max_init_timeo;
+
+	/* Heartbeat interval: The endpoint sends out a Heartbeat chunk to
+	 * the destination address every heartbeat interval. This value
+	 * will be inherited by all new transports.
+	 */
+	unsigned long hbinterval;
+
+	/* This is the max_retrans value for new transports in the
+	 * association.
+	 */
+	__u16 pathmaxrxt;
+
+	/* Flag that path mtu update is pending */
+	__u8   pmtu_pending;
+
+	/* Association : The smallest PMTU discovered for all of the
+	 * PMTU	       : peer's transport addresses.
+	 */
+	__u32 pathmtu;
+
+	/* Flags controlling Heartbeat, SACK delay, and Path MTU Discovery. */
+	__u32 param_flags;
+
+	/* SACK delay timeout */
+	unsigned long sackdelay;
+	__u32 sackfreq;
+
+
+	unsigned long timeouts[SCTP_NUM_TIMEOUT_TYPES];
+	struct timer_list timers[SCTP_NUM_TIMEOUT_TYPES];
+
+	/* Transport to which SHUTDOWN chunk was last sent.  */
+	struct sctp_transport *shutdown_last_sent_to;
+
+	/* How many times have we resent a SHUTDOWN */
+	int shutdown_retries;
+
+	/* Transport to which INIT chunk was last sent.  */
+	struct sctp_transport *init_last_sent_to;
+
+	/* Next TSN    : The next TSN number to be assigned to a new
+	 *	       : DATA chunk.  This is sent in the INIT or INIT
+	 *	       : ACK chunk to the peer and incremented each
+	 *	       : time a DATA chunk is assigned a TSN
+	 *	       : (normally just prior to transmit or during
+	 *	       : fragmentation).
+	 */
+	__u32 next_tsn;
+
+	/*
+	 * Last Rcvd   : This is the last TSN received in sequence.  This value
+	 * TSN	       : is set initially by taking the peer's Initial TSN,
+	 *	       : received in the INIT or INIT ACK chunk, and
+	 *	       : subtracting one from it.
+	 *
+	 * Most of RFC 2960 refers to this as the Cumulative TSN Ack Point.
+	 */
+
+	__u32 ctsn_ack_point;
+
+	/* PR-SCTP Advanced.Peer.Ack.Point */
+	__u32 adv_peer_ack_point;
+
+	/* Highest TSN that is acknowledged by incoming SACKs. */
+	__u32 highest_sacked;
+
+	/* TSN marking the fast recovery exit point */
+	__u32 fast_recovery_exit;
+
+	/* Flag to track the current fast recovery state */
+	__u8 fast_recovery;
+
+	/* The number of unacknowledged data chunks.  Reported through
+	 * the SCTP_STATUS sockopt.
+	 */
+	__u16 unack_data;
+
+	/* The total number of data chunks that we've had to retransmit
+	 * as the result of a T3 timer expiration
+	 */
+	__u32 rtx_data_chunks;
+
+	/* This is the association's receive buffer space.  This value is used
+	 * to set a_rwnd field in an INIT or a SACK chunk.
+	 */
+	__u32 rwnd;
+
+	/* This is the last advertised value of rwnd over a SACK chunk. */
+	__u32 a_rwnd;
+
+	/* Number of bytes by which the rwnd has slopped.  The rwnd is allowed
+	 * to slop over a maximum of the association's frag_point.
+	 */
+	__u32 rwnd_over;
+
+	/* Keeps treack of rwnd pressure.  This happens when we have
+	 * a window, but not recevie buffer (i.e small packets).  This one
+	 * is releases slowly (1 PMTU at a time ).
+	 */
+	__u32 rwnd_press;
+
+	/* This is the sndbuf size in use for the association.
+	 * This corresponds to the sndbuf size for the association,
+	 * as specified in the sk->sndbuf.
+	 */
+	int sndbuf_used;
+
+	/* This is the amount of memory that this association has allocated
+	 * in the receive path at any given time.
+	 */
+	atomic_t rmem_alloc;
+
+	/* This is the wait queue head for send requests waiting on
+	 * the association sndbuf space.
+	 */
+	wait_queue_head_t	wait;
+
+	/* The message size at which SCTP fragmentation will occur. */
+	__u32 frag_point;
+	__u32 user_frag;
+
+	/* Counter used to count INIT errors. */
+	int init_err_counter;
+
+	/* Count the number of INIT cycles (for doubling timeout). */
+	int init_cycle;
+
+	/* Default send parameters. */
+	__u16 default_stream;
+	__u16 default_flags;
+	__u32 default_ppid;
+	__u32 default_context;
+	__u32 default_timetolive;
+
+	/* Default receive parameters */
+	__u32 default_rcv_context;
+
+	/* This tracks outbound ssn for a given stream.	 */
+	struct sctp_ssnmap *ssnmap;
+
+	/* All outbound chunks go through this structure.  */
+	struct sctp_outq outqueue;
+
+	/* A smart pipe that will handle reordering and fragmentation,
+	 * as well as handle passing events up to the ULP.
+	 */
+	struct sctp_ulpq ulpq;
+
+	/* Last TSN that caused an ECNE Chunk to be sent.  */
+	__u32 last_ecne_tsn;
+
+	/* Last TSN that caused a CWR Chunk to be sent.	 */
+	__u32 last_cwr_tsn;
+
+	/* How many duplicated TSNs have we seen?  */
+	int numduptsns;
+
+	/* Number of seconds of idle time before an association is closed.
+	 * In the association context, this is really used as a boolean
+	 * since the real timeout is stored in the timeouts array
+	 */
+	__u32 autoclose;
+
+	/* These are to support
+	 * "SCTP Extensions for Dynamic Reconfiguration of IP Addresses
+	 *  and Enforcement of Flow and Message Limits"
+	 * <draft-ietf-tsvwg-addip-sctp-02.txt>
+	 * or "ADDIP" for short.
+	 */
+
+
+
+	/* ADDIP Section 4.1.1 Congestion Control of ASCONF Chunks
+	 *
+	 * R1) One and only one ASCONF Chunk MAY be in transit and
+	 * unacknowledged at any one time.  If a sender, after sending
+	 * an ASCONF chunk, decides it needs to transfer another
+	 * ASCONF Chunk, it MUST wait until the ASCONF-ACK Chunk
+	 * returns from the previous ASCONF Chunk before sending a
+	 * subsequent ASCONF. Note this restriction binds each side,
+	 * so at any time two ASCONF may be in-transit on any given
+	 * association (one sent from each endpoint).
+	 *
+	 * [This is our one-and-only-one ASCONF in flight.  If we do
+	 * not have an ASCONF in flight, this is NULL.]
+	 */
+	struct sctp_chunk *addip_last_asconf;
+
+	/* ADDIP Section 5.2 Upon reception of an ASCONF Chunk.
+	 *
+	 * This is needed to implement itmes E1 - E4 of the updated
+	 * spec.  Here is the justification:
+	 *
+	 * Since the peer may bundle multiple ASCONF chunks toward us,
+	 * we now need the ability to cache multiple ACKs.  The section
+	 * describes in detail how they are cached and cleaned up.
+	 */
+	struct list_head asconf_ack_list;
+
+	/* These ASCONF chunks are waiting to be sent.
+	 *
+	 * These chunaks can't be pushed to outqueue until receiving
+	 * ASCONF_ACK for the previous ASCONF indicated by
+	 * addip_last_asconf, so as to guarantee that only one ASCONF
+	 * is in flight at any time.
+	 *
+	 * ADDIP Section 4.1.1 Congestion Control of ASCONF Chunks
+	 *
+	 * In defining the ASCONF Chunk transfer procedures, it is
+	 * essential that these transfers MUST NOT cause congestion
+	 * within the network.	To achieve this, we place these
+	 * restrictions on the transfer of ASCONF Chunks:
+	 *
+	 * R1) One and only one ASCONF Chunk MAY be in transit and
+	 * unacknowledged at any one time.  If a sender, after sending
+	 * an ASCONF chunk, decides it needs to transfer another
+	 * ASCONF Chunk, it MUST wait until the ASCONF-ACK Chunk
+	 * returns from the previous ASCONF Chunk before sending a
+	 * subsequent ASCONF. Note this restriction binds each side,
+	 * so at any time two ASCONF may be in-transit on any given
+	 * association (one sent from each endpoint).
+	 *
+	 *
+	 * [I really think this is EXACTLY the sort of intelligence
+	 *  which already resides in sctp_outq.	 Please move this
+	 *  queue and its supporting logic down there.	--piggy]
+	 */
+	struct list_head addip_chunk_list;
+
+	/* ADDIP Section 4.1 ASCONF Chunk Procedures
+	 *
+	 * A2) A serial number should be assigned to the Chunk. The
+	 * serial number SHOULD be a monotonically increasing
+	 * number. The serial number SHOULD be initialized at
+	 * the start of the association to the same value as the
+	 * Initial TSN and every time a new ASCONF chunk is created
+	 * it is incremented by one after assigning the serial number
+	 * to the newly created chunk.
+	 *
+	 * ADDIP
+	 * 3.1.1  Address/Stream Configuration Change Chunk (ASCONF)
+	 *
+	 * Serial Number : 32 bits (unsigned integer)
+	 *
+	 * This value represents a Serial Number for the ASCONF
+	 * Chunk. The valid range of Serial Number is from 0 to
+	 * 4294967295 (2^32 - 1).  Serial Numbers wrap back to 0
+	 * after reaching 4294967295.
+	 */
+	__u32 addip_serial;
+	union sctp_addr *asconf_addr_del_pending;
+	int src_out_of_asoc_ok;
+	struct sctp_transport *new_transport;
+
+	/* SCTP AUTH: list of the endpoint shared keys.  These
+	 * keys are provided out of band by the user applicaton
+	 * and can't change during the lifetime of the association
+	 */
+	struct list_head endpoint_shared_keys;
+
+	/* SCTP AUTH:
+	 * The current generated assocaition shared key (secret)
+	 */
+	struct sctp_auth_bytes *asoc_shared_key;
+
+	/* SCTP AUTH: hmac id of the first peer requested algorithm
+	 * that we support.
+	 */
+	__u16 default_hmac_id;
+
+	__u16 active_key_id;
+
+	__u8 need_ecne:1,	/* Need to send an ECNE Chunk? */
+	     temp:1;		/* Is it a temporary association? */
+};
+
+
+/* An eyecatcher for determining if we are really looking at an
+ * association data structure.
+ */
+enum {
+	SCTP_ASSOC_EYECATCHER = 0xa550c123,
+};
+
+/* Recover the outter association structure. */
+static inline struct sctp_association *sctp_assoc(struct sctp_ep_common *base)
+{
+	struct sctp_association *asoc;
+
+	asoc = container_of(base, struct sctp_association, base);
+	return asoc;
+}
+
+/* These are function signatures for manipulating associations.	 */
+
+
+struct sctp_association *
+sctp_association_new(const struct sctp_endpoint *, const struct sock *,
+		     sctp_scope_t scope, gfp_t gfp);
+void sctp_association_free(struct sctp_association *);
+void sctp_association_put(struct sctp_association *);
+void sctp_association_hold(struct sctp_association *);
+
+struct sctp_transport *sctp_assoc_choose_alter_transport(
+	struct sctp_association *, struct sctp_transport *);
+void sctp_assoc_update_retran_path(struct sctp_association *);
+struct sctp_transport *sctp_assoc_lookup_paddr(const struct sctp_association *,
+					  const union sctp_addr *);
+int sctp_assoc_lookup_laddr(struct sctp_association *asoc,
+			    const union sctp_addr *laddr);
+struct sctp_transport *sctp_assoc_add_peer(struct sctp_association *,
+				     const union sctp_addr *address,
+				     const gfp_t gfp,
+				     const int peer_state);
+void sctp_assoc_del_peer(struct sctp_association *asoc,
+			 const union sctp_addr *addr);
+void sctp_assoc_rm_peer(struct sctp_association *asoc,
+			 struct sctp_transport *peer);
+void sctp_assoc_control_transport(struct sctp_association *,
+				  struct sctp_transport *,
+				  sctp_transport_cmd_t, sctp_sn_error_t);
+struct sctp_transport *sctp_assoc_lookup_tsn(struct sctp_association *, __u32);
+struct sctp_transport *sctp_assoc_is_match(struct sctp_association *,
+					   const union sctp_addr *,
+					   const union sctp_addr *);
+void sctp_assoc_migrate(struct sctp_association *, struct sock *);
+void sctp_assoc_update(struct sctp_association *old,
+		       struct sctp_association *new);
+
+__u32 sctp_association_get_next_tsn(struct sctp_association *);
+
+void sctp_assoc_sync_pmtu(struct sctp_association *);
+void sctp_assoc_rwnd_increase(struct sctp_association *, unsigned);
+void sctp_assoc_rwnd_decrease(struct sctp_association *, unsigned);
+void sctp_assoc_set_primary(struct sctp_association *,
+			    struct sctp_transport *);
+void sctp_assoc_del_nonprimary_peers(struct sctp_association *,
+				    struct sctp_transport *);
+int sctp_assoc_set_bind_addr_from_ep(struct sctp_association *,
+				     sctp_scope_t, gfp_t);
+int sctp_assoc_set_bind_addr_from_cookie(struct sctp_association *,
+					 struct sctp_cookie*,
+					 gfp_t gfp);
+int sctp_assoc_set_id(struct sctp_association *, gfp_t);
+void sctp_assoc_clean_asconf_ack_cache(const struct sctp_association *asoc);
+struct sctp_chunk *sctp_assoc_lookup_asconf_ack(
+					const struct sctp_association *asoc,
+					__be32 serial);
+void sctp_asconf_queue_teardown(struct sctp_association *asoc);
+
+int sctp_cmp_addr_exact(const union sctp_addr *ss1,
+			const union sctp_addr *ss2);
+struct sctp_chunk *sctp_get_ecne_prepend(struct sctp_association *asoc);
+
+/* A convenience structure to parse out SCTP specific CMSGs. */
+typedef struct sctp_cmsgs {
+	struct sctp_initmsg *init;
+	struct sctp_sndrcvinfo *info;
+} sctp_cmsgs_t;
+
+/* Structure for tracking memory objects */
+typedef struct {
+	char *label;
+	atomic_t *counter;
+} sctp_dbg_objcnt_entry_t;
+
+#endif /* __sctp_structs_h__ */
diff --git a/include/net/sctp/tsnmap.h b/include/net/sctp/tsnmap.h
new file mode 100644
index 00000000..e7728bc1
--- /dev/null
+++ b/include/net/sctp/tsnmap.h
@@ -0,0 +1,178 @@
+/* SCTP kernel implementation
+ * (C) Copyright IBM Corp. 2001, 2004
+ * Copyright (c) 1999-2000 Cisco, Inc.
+ * Copyright (c) 1999-2001 Motorola, Inc.
+ * Copyright (c) 2001 Intel Corp.
+ *
+ * This file is part of the SCTP kernel implementation
+ *
+ * These are the definitions needed for the tsnmap type.  The tsnmap is used
+ * to track out of order TSNs received.
+ *
+ * This SCTP implementation is free software;
+ * you can redistribute it and/or modify it under the terms of
+ * the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This SCTP implementation is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ *                 ************************
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with GNU CC; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ * Please send any bug reports or fixes you make to the
+ * email address(es):
+ *    lksctp developers <lksctp-developers@lists.sourceforge.net>
+ *
+ * Or submit a bug report through the following website:
+ *    http://www.sf.net/projects/lksctp
+ *
+ * Written or modified by:
+ *   Jon Grimm             <jgrimm@us.ibm.com>
+ *   La Monte H.P. Yarroll <piggy@acm.org>
+ *   Karl Knutson          <karl@athena.chicago.il.us>
+ *   Sridhar Samudrala     <sri@us.ibm.com>
+ *
+ * Any bugs reported given to us we will try to fix... any fixes shared will
+ * be incorporated into the next SCTP release.
+ */
+#include <net/sctp/constants.h>
+
+#ifndef __sctp_tsnmap_h__
+#define __sctp_tsnmap_h__
+
+/* RFC 2960 12.2 Parameters necessary per association (i.e. the TCB)
+ * Mapping  An array of bits or bytes indicating which out of
+ * Array    order TSN's have been received (relative to the
+ *          Last Rcvd TSN). If no gaps exist, i.e. no out of
+ *          order packets have been received, this array
+ *          will be set to all zero. This structure may be
+ *          in the form of a circular buffer or bit array.
+ */
+struct sctp_tsnmap {
+	/* This array counts the number of chunks with each TSN.
+	 * It points at one of the two buffers with which we will
+	 * ping-pong between.
+	 */
+	unsigned long *tsn_map;
+
+	/* This is the TSN at tsn_map[0].  */
+	__u32 base_tsn;
+
+	/* Last Rcvd   : This is the last TSN received in
+	 * TSN	       : sequence. This value is set initially by
+	 *             : taking the peer's Initial TSN, received in
+	 *             : the INIT or INIT ACK chunk, and subtracting
+	 *             : one from it.
+	 *
+	 * Throughout most of the specification this is called the
+	 * "Cumulative TSN ACK Point".  In this case, we
+	 * ignore the advice in 12.2 in favour of the term
+	 * used in the bulk of the text.
+	 */
+	__u32 cumulative_tsn_ack_point;
+
+	/* This is the highest TSN we've marked.  */
+	__u32 max_tsn_seen;
+
+	/* This is the minimum number of TSNs we can track.  This corresponds
+	 * to the size of tsn_map.   Note: the overflow_map allows us to
+	 * potentially track more than this quantity.
+	 */
+	__u16 len;
+
+	/* Data chunks pending receipt. used by SCTP_STATUS sockopt */
+	__u16 pending_data;
+
+	/* Record duplicate TSNs here.  We clear this after
+	 * every SACK.  Store up to SCTP_MAX_DUP_TSNS worth of
+	 * information.
+	 */
+	__u16 num_dup_tsns;
+	__be32 dup_tsns[SCTP_MAX_DUP_TSNS];
+};
+
+struct sctp_tsnmap_iter {
+	__u32 start;
+};
+
+/* Initialize a block of memory as a tsnmap.  */
+struct sctp_tsnmap *sctp_tsnmap_init(struct sctp_tsnmap *, __u16 len,
+				     __u32 initial_tsn, gfp_t gfp);
+
+void sctp_tsnmap_free(struct sctp_tsnmap *map);
+
+/* Test the tracking state of this TSN.
+ * Returns:
+ *   0 if the TSN has not yet been seen
+ *  >0 if the TSN has been seen (duplicate)
+ *  <0 if the TSN is invalid (too large to track)
+ */
+int sctp_tsnmap_check(const struct sctp_tsnmap *, __u32 tsn);
+
+/* Mark this TSN as seen.  */
+int sctp_tsnmap_mark(struct sctp_tsnmap *, __u32 tsn);
+
+/* Mark this TSN and all lower as seen. */
+void sctp_tsnmap_skip(struct sctp_tsnmap *map, __u32 tsn);
+
+/* Retrieve the Cumulative TSN ACK Point.  */
+static inline __u32 sctp_tsnmap_get_ctsn(const struct sctp_tsnmap *map)
+{
+	return map->cumulative_tsn_ack_point;
+}
+
+/* Retrieve the highest TSN we've seen.  */
+static inline __u32 sctp_tsnmap_get_max_tsn_seen(const struct sctp_tsnmap *map)
+{
+	return map->max_tsn_seen;
+}
+
+/* How many duplicate TSNs are stored? */
+static inline __u16 sctp_tsnmap_num_dups(struct sctp_tsnmap *map)
+{
+	return map->num_dup_tsns;
+}
+
+/* Return pointer to duplicate tsn array as needed by SACK. */
+static inline __be32 *sctp_tsnmap_get_dups(struct sctp_tsnmap *map)
+{
+	map->num_dup_tsns = 0;
+	return map->dup_tsns;
+}
+
+/* How many gap ack blocks do we have recorded? */
+__u16 sctp_tsnmap_num_gabs(struct sctp_tsnmap *map,
+			   struct sctp_gap_ack_block *gabs);
+
+/* Refresh the count on pending data. */
+__u16 sctp_tsnmap_pending(struct sctp_tsnmap *map);
+
+/* Is there a gap in the TSN map?  */
+static inline int sctp_tsnmap_has_gap(const struct sctp_tsnmap *map)
+{
+	return map->cumulative_tsn_ack_point != map->max_tsn_seen;
+}
+
+/* Mark a duplicate TSN.  Note:  limit the storage of duplicate TSN
+ * information.
+ */
+static inline void sctp_tsnmap_mark_dup(struct sctp_tsnmap *map, __u32 tsn)
+{
+	if (map->num_dup_tsns < SCTP_MAX_DUP_TSNS)
+		map->dup_tsns[map->num_dup_tsns++] = htonl(tsn);
+}
+
+/* Renege a TSN that was seen.  */
+void sctp_tsnmap_renege(struct sctp_tsnmap *, __u32 tsn);
+
+/* Is there a gap in the TSN map? */
+int sctp_tsnmap_has_gap(const struct sctp_tsnmap *);
+
+#endif /* __sctp_tsnmap_h__ */
diff --git a/include/net/sctp/ulpevent.h b/include/net/sctp/ulpevent.h
new file mode 100644
index 00000000..ca4693b4
--- /dev/null
+++ b/include/net/sctp/ulpevent.h
@@ -0,0 +1,171 @@
+/* SCTP kernel implementation
+ * (C) Copyright IBM Corp. 2001, 2004
+ * Copyright (c) 1999-2000 Cisco, Inc.
+ * Copyright (c) 1999-2001 Motorola, Inc.
+ * Copyright (c) 2001 Intel Corp.
+ * Copyright (c) 2001 Nokia, Inc.
+ * Copyright (c) 2001 La Monte H.P. Yarroll
+ *
+ * These are the definitions needed for the sctp_ulpevent type.  The
+ * sctp_ulpevent type is used to carry information from the state machine
+ * upwards to the ULP.
+ *
+ * This file is part of the SCTP kernel implementation
+ *
+ * This SCTP implementation is free software;
+ * you can redistribute it and/or modify it under the terms of
+ * the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This SCTP implementation is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ *                 ************************
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with GNU CC; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ * Please send any bug reports or fixes you make to the
+ * email address(es):
+ *    lksctp developers <lksctp-developers@lists.sourceforge.net>
+ *
+ * Or submit a bug report through the following website:
+ *    http://www.sf.net/projects/lksctp
+ *
+ * Written or modified by:
+ *   Jon Grimm             <jgrimm@us.ibm.com>
+ *   La Monte H.P. Yarroll <piggy@acm.org>
+ *   Karl Knutson          <karl@athena.chicago.il.us>
+ *   Sridhar Samudrala     <sri@us.ibm.com>
+ *
+ * Any bugs reported given to us we will try to fix... any fixes shared will
+ * be incorporated into the next SCTP release.
+ */
+
+#ifndef __sctp_ulpevent_h__
+#define __sctp_ulpevent_h__
+
+/* A structure to carry information to the ULP (e.g. Sockets API) */
+/* Warning: This sits inside an skb.cb[] area.  Be very careful of
+ * growing this structure as it is at the maximum limit now.
+ */
+struct sctp_ulpevent {
+	struct sctp_association *asoc;
+	__u16 stream;
+	__u16 ssn;
+	__u16 flags;
+	__u32 ppid;
+	__u32 tsn;
+	__u32 cumtsn;
+	int msg_flags;
+	int iif;
+	unsigned int rmem_len;
+};
+
+/* Retrieve the skb this event sits inside of. */
+static inline struct sk_buff *sctp_event2skb(const struct sctp_ulpevent *ev)
+{
+	return container_of((void *)ev, struct sk_buff, cb);
+}
+
+/* Retrieve & cast the event sitting inside the skb. */
+static inline struct sctp_ulpevent *sctp_skb2event(struct sk_buff *skb)
+{
+	return (struct sctp_ulpevent *)skb->cb;
+}
+
+void sctp_ulpevent_free(struct sctp_ulpevent *);
+int sctp_ulpevent_is_notification(const struct sctp_ulpevent *);
+unsigned int sctp_queue_purge_ulpevents(struct sk_buff_head *list);
+
+struct sctp_ulpevent *sctp_ulpevent_make_assoc_change(
+	const struct sctp_association *asoc,
+	__u16 flags,
+	__u16 state,
+	__u16 error,
+	__u16 outbound,
+	__u16 inbound,
+	struct sctp_chunk *chunk,
+	gfp_t gfp);
+
+struct sctp_ulpevent *sctp_ulpevent_make_peer_addr_change(
+	const struct sctp_association *asoc,
+	const struct sockaddr_storage *aaddr,
+	int flags,
+	int state,
+	int error,
+	gfp_t gfp);
+
+struct sctp_ulpevent *sctp_ulpevent_make_remote_error(
+	const struct sctp_association *asoc,
+	struct sctp_chunk *chunk,
+	__u16 flags,
+	gfp_t gfp);
+struct sctp_ulpevent *sctp_ulpevent_make_send_failed(
+	const struct sctp_association *asoc,
+	struct sctp_chunk *chunk,
+	__u16 flags,
+	__u32 error,
+	gfp_t gfp);
+
+struct sctp_ulpevent *sctp_ulpevent_make_shutdown_event(
+	const struct sctp_association *asoc,
+	__u16 flags,
+	gfp_t gfp);
+
+struct sctp_ulpevent *sctp_ulpevent_make_pdapi(
+	const struct sctp_association *asoc,
+	__u32 indication, gfp_t gfp);
+
+struct sctp_ulpevent *sctp_ulpevent_make_adaptation_indication(
+	const struct sctp_association *asoc, gfp_t gfp);
+
+struct sctp_ulpevent *sctp_ulpevent_make_rcvmsg(struct sctp_association *asoc,
+	struct sctp_chunk *chunk,
+	gfp_t gfp);
+
+struct sctp_ulpevent *sctp_ulpevent_make_authkey(
+	const struct sctp_association *asoc, __u16 key_id,
+	__u32 indication, gfp_t gfp);
+
+struct sctp_ulpevent *sctp_ulpevent_make_sender_dry_event(
+	const struct sctp_association *asoc, gfp_t gfp);
+
+void sctp_ulpevent_read_sndrcvinfo(const struct sctp_ulpevent *event,
+	struct msghdr *);
+__u16 sctp_ulpevent_get_notification_type(const struct sctp_ulpevent *event);
+
+/* Is this event type enabled? */
+static inline int sctp_ulpevent_type_enabled(__u16 sn_type,
+					     struct sctp_event_subscribe *mask)
+{
+	char *amask = (char *) mask;
+	return amask[sn_type - SCTP_SN_TYPE_BASE];
+}
+
+/* Given an event subscription, is this event enabled? */
+static inline int sctp_ulpevent_is_enabled(const struct sctp_ulpevent *event,
+					   struct sctp_event_subscribe *mask)
+{
+	__u16 sn_type;
+	int enabled = 1;
+
+	if (sctp_ulpevent_is_notification(event)) {
+		sn_type = sctp_ulpevent_get_notification_type(event);
+		enabled = sctp_ulpevent_type_enabled(sn_type, mask);
+	}
+	return enabled;
+}
+
+#endif /* __sctp_ulpevent_h__ */
+
+
+
+
+
+
+
diff --git a/include/net/sctp/ulpqueue.h b/include/net/sctp/ulpqueue.h
new file mode 100644
index 00000000..2e5ee0d8
--- /dev/null
+++ b/include/net/sctp/ulpqueue.h
@@ -0,0 +1,94 @@
+/* SCTP kernel implementation
+ * (C) Copyright IBM Corp. 2001, 2004
+ * Copyright (c) 1999-2000 Cisco, Inc.
+ * Copyright (c) 1999-2001 Motorola, Inc.
+ * Copyright (c) 2001 Intel Corp.
+ * Copyright (c) 2001 Nokia, Inc.
+ * Copyright (c) 2001 La Monte H.P. Yarroll
+ *
+ * These are the definitions needed for the sctp_ulpq type.  The
+ * sctp_ulpq is the interface between the Upper Layer Protocol, or ULP,
+ * and the core SCTP state machine.  This is the component which handles
+ * reassembly and ordering.
+ *
+ * This SCTP implementation is free software;
+ * you can redistribute it and/or modify it under the terms of
+ * the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This SCTP implementation  is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ *                 ************************
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with GNU CC; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ * Please send any bug reports or fixes you make to the
+ * email addresses:
+ *    lksctp developers <lksctp-developers@lists.sourceforge.net>
+ *
+ * Or submit a bug report through the following website:
+ *    http://www.sf.net/projects/lksctp
+ *
+ * Written or modified by:
+ *   Jon Grimm             <jgrimm@us.ibm.com>
+ *   La Monte H.P. Yarroll <piggy@acm.org>
+ *   Sridhar Samudrala     <sri@us.ibm.com>
+ *
+ * Any bugs reported given to us we will try to fix... any fixes shared will
+ * be incorporated into the next SCTP release.
+ */
+
+#ifndef __sctp_ulpqueue_h__
+#define __sctp_ulpqueue_h__
+
+/* A structure to carry information to the ULP (e.g. Sockets API) */
+struct sctp_ulpq {
+	char malloced;
+	char pd_mode;
+	struct sctp_association *asoc;
+	struct sk_buff_head reasm;
+	struct sk_buff_head lobby;
+};
+
+/* Prototypes. */
+struct sctp_ulpq *sctp_ulpq_init(struct sctp_ulpq *,
+				 struct sctp_association *);
+void sctp_ulpq_flush(struct sctp_ulpq *ulpq);
+void sctp_ulpq_free(struct sctp_ulpq *);
+
+/* Add a new DATA chunk for processing. */
+int sctp_ulpq_tail_data(struct sctp_ulpq *, struct sctp_chunk *, gfp_t);
+
+/* Add a new event for propagation to the ULP. */
+int sctp_ulpq_tail_event(struct sctp_ulpq *, struct sctp_ulpevent *ev);
+
+/* Renege previously received chunks.  */
+void sctp_ulpq_renege(struct sctp_ulpq *, struct sctp_chunk *, gfp_t);
+
+/* Perform partial delivery. */
+void sctp_ulpq_partial_delivery(struct sctp_ulpq *, struct sctp_chunk *, gfp_t);
+
+/* Abort the partial delivery. */
+void sctp_ulpq_abort_pd(struct sctp_ulpq *, gfp_t);
+
+/* Clear the partial data delivery condition on this socket. */
+int sctp_clear_pd(struct sock *sk, struct sctp_association *asoc);
+
+/* Skip over an SSN. */
+void sctp_ulpq_skip(struct sctp_ulpq *ulpq, __u16 sid, __u16 ssn);
+
+void sctp_ulpq_reasm_flushtsn(struct sctp_ulpq *, __u32);
+#endif /* __sctp_ulpqueue_h__ */
+
+
+
+
+
+
+
diff --git a/include/net/sctp/user.h b/include/net/sctp/user.h
new file mode 100644
index 00000000..0842ef00
--- /dev/null
+++ b/include/net/sctp/user.h
@@ -0,0 +1,744 @@
+/* SCTP kernel implementation
+ * (C) Copyright IBM Corp. 2001, 2004
+ * Copyright (c) 1999-2000 Cisco, Inc.
+ * Copyright (c) 1999-2001 Motorola, Inc.
+ * Copyright (c) 2002 Intel Corp.
+ *
+ * This file is part of the SCTP kernel implementation
+ *
+ * This header represents the structures and constants needed to support
+ * the SCTP Extension to the Sockets API.
+ *
+ * This SCTP implementation is free software;
+ * you can redistribute it and/or modify it under the terms of
+ * the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This SCTP implementation is distributed in the hope that it
+ * will be useful, but WITHOUT ANY WARRANTY; without even the implied
+ *                 ************************
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with GNU CC; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ *
+ * Please send any bug reports or fixes you make to the
+ * email address(es):
+ *    lksctp developers <lksctp-developers@lists.sourceforge.net>
+ *
+ * Or submit a bug report through the following website:
+ *    http://www.sf.net/projects/lksctp
+ *
+ * Written or modified by:
+ *    La Monte H.P. Yarroll    <piggy@acm.org>
+ *    R. Stewart               <randall@sctp.chicago.il.us>
+ *    K. Morneau               <kmorneau@cisco.com>
+ *    Q. Xie                   <qxie1@email.mot.com>
+ *    Karl Knutson             <karl@athena.chicago.il.us>
+ *    Jon Grimm                <jgrimm@us.ibm.com>
+ *    Daisy Chang              <daisyc@us.ibm.com>
+ *    Ryan Layer               <rmlayer@us.ibm.com>
+ *    Ardelle Fan	       <ardelle.fan@intel.com>
+ *    Sridhar Samudrala        <sri@us.ibm.com>
+ *
+ * Any bugs reported given to us we will try to fix... any fixes shared will
+ * be incorporated into the next SCTP release.
+ */
+
+#ifndef __net_sctp_user_h__
+#define __net_sctp_user_h__
+
+#include <linux/types.h>
+#include <linux/socket.h>
+
+typedef __s32 sctp_assoc_t;
+
+/* The following symbols come from the Sockets API Extensions for
+ * SCTP <draft-ietf-tsvwg-sctpsocket-07.txt>.
+ */
+#define SCTP_RTOINFO	0
+#define SCTP_ASSOCINFO  1
+#define SCTP_INITMSG	2
+#define SCTP_NODELAY	3		/* Get/set nodelay option. */
+#define SCTP_AUTOCLOSE	4
+#define SCTP_SET_PEER_PRIMARY_ADDR 5
+#define SCTP_PRIMARY_ADDR	6
+#define SCTP_ADAPTATION_LAYER	7
+#define SCTP_DISABLE_FRAGMENTS	8
+#define SCTP_PEER_ADDR_PARAMS	9
+#define SCTP_DEFAULT_SEND_PARAM	10
+#define SCTP_EVENTS	11
+#define SCTP_I_WANT_MAPPED_V4_ADDR 12	/* Turn on/off mapped v4 addresses  */
+#define SCTP_MAXSEG	13		/* Get/set maximum fragment. */
+#define SCTP_STATUS	14
+#define SCTP_GET_PEER_ADDR_INFO	15
+#define SCTP_DELAYED_ACK_TIME	16
+#define SCTP_DELAYED_ACK SCTP_DELAYED_ACK_TIME
+#define SCTP_DELAYED_SACK SCTP_DELAYED_ACK_TIME
+#define SCTP_CONTEXT	17
+#define SCTP_FRAGMENT_INTERLEAVE	18
+#define SCTP_PARTIAL_DELIVERY_POINT	19 /* Set/Get partial delivery point */
+#define SCTP_MAX_BURST	20		/* Set/Get max burst */
+#define SCTP_AUTH_CHUNK	21	/* Set only: add a chunk type to authenticate */
+#define SCTP_HMAC_IDENT	22
+#define SCTP_AUTH_KEY	23
+#define SCTP_AUTH_ACTIVE_KEY	24
+#define SCTP_AUTH_DELETE_KEY	25
+#define SCTP_PEER_AUTH_CHUNKS	26	/* Read only */
+#define SCTP_LOCAL_AUTH_CHUNKS	27	/* Read only */
+#define SCTP_GET_ASSOC_NUMBER	28	/* Read only */
+#define SCTP_GET_ASSOC_ID_LIST	29	/* Read only */
+#define SCTP_AUTO_ASCONF       30
+
+/* Internal Socket Options. Some of the sctp library functions are
+ * implemented using these socket options.
+ */
+#define SCTP_SOCKOPT_BINDX_ADD	100	/* BINDX requests for adding addrs */
+#define SCTP_SOCKOPT_BINDX_REM	101	/* BINDX requests for removing addrs. */
+#define SCTP_SOCKOPT_PEELOFF	102	/* peel off association. */
+/* Options 104-106 are deprecated and removed. Do not use this space */
+#define SCTP_SOCKOPT_CONNECTX_OLD	107	/* CONNECTX old requests. */
+#define SCTP_GET_PEER_ADDRS	108		/* Get all peer address. */
+#define SCTP_GET_LOCAL_ADDRS	109		/* Get all local address. */
+#define SCTP_SOCKOPT_CONNECTX	110		/* CONNECTX requests. */
+#define SCTP_SOCKOPT_CONNECTX3	111	/* CONNECTX requests (updated) */
+
+/*
+ * 5.2.1 SCTP Initiation Structure (SCTP_INIT)
+ *
+ *   This cmsghdr structure provides information for initializing new
+ *   SCTP associations with sendmsg().  The SCTP_INITMSG socket option
+ *   uses this same data structure.  This structure is not used for
+ *   recvmsg().
+ *
+ *   cmsg_level    cmsg_type      cmsg_data[]
+ *   ------------  ------------   ----------------------
+ *   IPPROTO_SCTP  SCTP_INIT      struct sctp_initmsg
+ *
+ */
+struct sctp_initmsg {
+	__u16 sinit_num_ostreams;
+	__u16 sinit_max_instreams;
+	__u16 sinit_max_attempts;
+	__u16 sinit_max_init_timeo;
+};
+
+/*
+ * 5.2.2 SCTP Header Information Structure (SCTP_SNDRCV)
+ *
+ *   This cmsghdr structure specifies SCTP options for sendmsg() and
+ *   describes SCTP header information about a received message through
+ *   recvmsg().
+ *
+ *   cmsg_level    cmsg_type      cmsg_data[]
+ *   ------------  ------------   ----------------------
+ *   IPPROTO_SCTP  SCTP_SNDRCV    struct sctp_sndrcvinfo
+ *
+ */
+struct sctp_sndrcvinfo {
+	__u16 sinfo_stream;
+	__u16 sinfo_ssn;
+	__u16 sinfo_flags;
+	__u32 sinfo_ppid;
+	__u32 sinfo_context;
+	__u32 sinfo_timetolive;
+	__u32 sinfo_tsn;
+	__u32 sinfo_cumtsn;
+	sctp_assoc_t sinfo_assoc_id;
+};
+
+/*
+ *  sinfo_flags: 16 bits (unsigned integer)
+ *
+ *   This field may contain any of the following flags and is composed of
+ *   a bitwise OR of these values.
+ */
+
+enum sctp_sinfo_flags {
+	SCTP_UNORDERED = 1,  /* Send/receive message unordered. */
+	SCTP_ADDR_OVER = 2,  /* Override the primary destination. */
+	SCTP_ABORT=4,        /* Send an ABORT message to the peer. */
+	SCTP_SACK_IMMEDIATELY = 8,	/* SACK should be sent without delay */
+	SCTP_EOF=MSG_FIN,    /* Initiate graceful shutdown process. */	
+};
+
+
+/* These are cmsg_types.  */
+typedef enum sctp_cmsg_type {
+	SCTP_INIT,              /* 5.2.1 SCTP Initiation Structure */
+	SCTP_SNDRCV,            /* 5.2.2 SCTP Header Information Structure */
+} sctp_cmsg_t;
+
+
+/*
+ * 5.3.1.1 SCTP_ASSOC_CHANGE
+ *
+ *   Communication notifications inform the ULP that an SCTP association
+ *   has either begun or ended. The identifier for a new association is
+ *   provided by this notificaion. The notification information has the
+ *   following format:
+ *
+ */
+struct sctp_assoc_change {
+	__u16 sac_type;
+	__u16 sac_flags;
+	__u32 sac_length;
+	__u16 sac_state;
+	__u16 sac_error;
+	__u16 sac_outbound_streams;
+	__u16 sac_inbound_streams;
+	sctp_assoc_t sac_assoc_id;
+	__u8 sac_info[0];
+};
+
+/*
+ *   sac_state: 32 bits (signed integer)
+ *
+ *   This field holds one of a number of values that communicate the
+ *   event that happened to the association.  They include:
+ *
+ *   Note:  The following state names deviate from the API draft as
+ *   the names clash too easily with other kernel symbols.
+ */
+enum sctp_sac_state {
+	SCTP_COMM_UP,
+	SCTP_COMM_LOST,
+	SCTP_RESTART,
+	SCTP_SHUTDOWN_COMP,
+	SCTP_CANT_STR_ASSOC,
+};
+
+/*
+ * 5.3.1.2 SCTP_PEER_ADDR_CHANGE
+ *
+ *   When a destination address on a multi-homed peer encounters a change
+ *   an interface details event is sent.  The information has the
+ *   following structure:
+ */
+struct sctp_paddr_change {
+	__u16 spc_type;
+	__u16 spc_flags;
+	__u32 spc_length;
+	struct sockaddr_storage spc_aaddr;
+	int spc_state;
+	int spc_error;
+	sctp_assoc_t spc_assoc_id;
+} __attribute__((packed, aligned(4)));
+
+/*
+ *    spc_state:  32 bits (signed integer)
+ *
+ *   This field holds one of a number of values that communicate the
+ *   event that happened to the address.  They include:
+ */
+enum sctp_spc_state {
+	SCTP_ADDR_AVAILABLE,
+	SCTP_ADDR_UNREACHABLE,
+	SCTP_ADDR_REMOVED,
+	SCTP_ADDR_ADDED,
+	SCTP_ADDR_MADE_PRIM,
+	SCTP_ADDR_CONFIRMED,
+};
+
+
+/*
+ * 5.3.1.3 SCTP_REMOTE_ERROR
+ *
+ *   A remote peer may send an Operational Error message to its peer.
+ *   This message indicates a variety of error conditions on an
+ *   association. The entire error TLV as it appears on the wire is
+ *   included in a SCTP_REMOTE_ERROR event.  Please refer to the SCTP
+ *   specification [SCTP] and any extensions for a list of possible
+ *   error formats. SCTP error TLVs have the format:
+ */
+struct sctp_remote_error {
+	__u16 sre_type;
+	__u16 sre_flags;
+	__u32 sre_length;
+	__u16 sre_error;
+	sctp_assoc_t sre_assoc_id;
+	__u8 sre_data[0];
+};
+
+
+/*
+ * 5.3.1.4 SCTP_SEND_FAILED
+ *
+ *   If SCTP cannot deliver a message it may return the message as a
+ *   notification.
+ */
+struct sctp_send_failed {
+	__u16 ssf_type;
+	__u16 ssf_flags;
+	__u32 ssf_length;
+	__u32 ssf_error;
+	struct sctp_sndrcvinfo ssf_info;
+	sctp_assoc_t ssf_assoc_id;
+	__u8 ssf_data[0];
+};
+
+/*
+ *   ssf_flags: 16 bits (unsigned integer)
+ *
+ *   The flag value will take one of the following values
+ *
+ *   SCTP_DATA_UNSENT  - Indicates that the data was never put on
+ *                       the wire.
+ *
+ *   SCTP_DATA_SENT    - Indicates that the data was put on the wire.
+ *                       Note that this does not necessarily mean that the
+ *                       data was (or was not) successfully delivered.
+ */
+enum sctp_ssf_flags {
+	SCTP_DATA_UNSENT,
+	SCTP_DATA_SENT,
+};
+
+/*
+ * 5.3.1.5 SCTP_SHUTDOWN_EVENT
+ *
+ *   When a peer sends a SHUTDOWN, SCTP delivers this notification to
+ *   inform the application that it should cease sending data.
+ */
+struct sctp_shutdown_event {
+	__u16 sse_type;
+	__u16 sse_flags;
+	__u32 sse_length;
+	sctp_assoc_t sse_assoc_id;
+};
+
+/*
+ * 5.3.1.6 SCTP_ADAPTATION_INDICATION
+ *
+ *   When a peer sends a Adaptation Layer Indication parameter , SCTP
+ *   delivers this notification to inform the application
+ *   that of the peers requested adaptation layer.
+ */
+struct sctp_adaptation_event {
+	__u16 sai_type;
+	__u16 sai_flags;
+	__u32 sai_length;
+	__u32 sai_adaptation_ind;
+	sctp_assoc_t sai_assoc_id;
+};
+
+/*
+ * 5.3.1.7 SCTP_PARTIAL_DELIVERY_EVENT
+ *
+ *   When a receiver is engaged in a partial delivery of a
+ *   message this notification will be used to indicate
+ *   various events.
+ */
+struct sctp_pdapi_event {
+	__u16 pdapi_type;
+	__u16 pdapi_flags;
+	__u32 pdapi_length;
+	__u32 pdapi_indication;
+	sctp_assoc_t pdapi_assoc_id;
+};
+
+enum { SCTP_PARTIAL_DELIVERY_ABORTED=0, };
+
+struct sctp_authkey_event {
+	__u16 auth_type;
+	__u16 auth_flags;
+	__u32 auth_length;
+	__u16 auth_keynumber;
+	__u16 auth_altkeynumber;
+	__u32 auth_indication;
+	sctp_assoc_t auth_assoc_id;
+};
+
+enum { SCTP_AUTH_NEWKEY = 0, };
+
+/*
+ * 6.1.9. SCTP_SENDER_DRY_EVENT
+ *
+ * When the SCTP stack has no more user data to send or retransmit, this
+ * notification is given to the user. Also, at the time when a user app
+ * subscribes to this event, if there is no data to be sent or
+ * retransmit, the stack will immediately send up this notification.
+ */
+struct sctp_sender_dry_event {
+	__u16 sender_dry_type;
+	__u16 sender_dry_flags;
+	__u32 sender_dry_length;
+	sctp_assoc_t sender_dry_assoc_id;
+};
+
+/*
+ * Described in Section 7.3
+ *   Ancillary Data and Notification Interest Options
+ */
+struct sctp_event_subscribe {
+	__u8 sctp_data_io_event;
+	__u8 sctp_association_event;
+	__u8 sctp_address_event;
+	__u8 sctp_send_failure_event;
+	__u8 sctp_peer_error_event;
+	__u8 sctp_shutdown_event;
+	__u8 sctp_partial_delivery_event;
+	__u8 sctp_adaptation_layer_event;
+	__u8 sctp_authentication_event;
+	__u8 sctp_sender_dry_event;
+};
+
+/*
+ * 5.3.1 SCTP Notification Structure
+ *
+ *   The notification structure is defined as the union of all
+ *   notification types.
+ *
+ */
+union sctp_notification {
+	struct {
+		__u16 sn_type;             /* Notification type. */
+		__u16 sn_flags;
+		__u32 sn_length;
+	} sn_header;
+	struct sctp_assoc_change sn_assoc_change;
+	struct sctp_paddr_change sn_paddr_change;
+	struct sctp_remote_error sn_remote_error;
+	struct sctp_send_failed sn_send_failed;
+	struct sctp_shutdown_event sn_shutdown_event;
+	struct sctp_adaptation_event sn_adaptation_event;
+	struct sctp_pdapi_event sn_pdapi_event;
+	struct sctp_authkey_event sn_authkey_event;
+	struct sctp_sender_dry_event sn_sender_dry_event;
+};
+
+/* Section 5.3.1
+ * All standard values for sn_type flags are greater than 2^15.
+ * Values from 2^15 and down are reserved.
+ */
+
+enum sctp_sn_type {
+	SCTP_SN_TYPE_BASE     = (1<<15),
+	SCTP_ASSOC_CHANGE,
+	SCTP_PEER_ADDR_CHANGE,
+	SCTP_SEND_FAILED,
+	SCTP_REMOTE_ERROR,
+	SCTP_SHUTDOWN_EVENT,
+	SCTP_PARTIAL_DELIVERY_EVENT,
+	SCTP_ADAPTATION_INDICATION,
+	SCTP_AUTHENTICATION_EVENT,
+#define SCTP_AUTHENTICATION_INDICATION	SCTP_AUTHENTICATION_EVENT
+	SCTP_SENDER_DRY_EVENT,
+};
+
+/* Notification error codes used to fill up the error fields in some
+ * notifications.
+ * SCTP_PEER_ADDRESS_CHAGE 	: spc_error
+ * SCTP_ASSOC_CHANGE		: sac_error
+ * These names should be potentially included in the draft 04 of the SCTP
+ * sockets API specification.
+ */
+typedef enum sctp_sn_error {
+	SCTP_FAILED_THRESHOLD,
+	SCTP_RECEIVED_SACK,
+	SCTP_HEARTBEAT_SUCCESS,
+	SCTP_RESPONSE_TO_USER_REQ,
+	SCTP_INTERNAL_ERROR,
+	SCTP_SHUTDOWN_GUARD_EXPIRES,
+	SCTP_PEER_FAULTY,
+} sctp_sn_error_t;
+
+/*
+ * 7.1.1 Retransmission Timeout Parameters (SCTP_RTOINFO)
+ *
+ *   The protocol parameters used to initialize and bound retransmission
+ *   timeout (RTO) are tunable.  See [SCTP] for more information on how
+ *   these parameters are used in RTO calculation. 
+ */
+struct sctp_rtoinfo {
+	sctp_assoc_t	srto_assoc_id;
+	__u32		srto_initial;
+	__u32		srto_max;
+	__u32		srto_min;
+};
+
+/*
+ * 7.1.2 Association Parameters (SCTP_ASSOCINFO)
+ *
+ *   This option is used to both examine and set various association and
+ *   endpoint parameters.
+ */
+struct sctp_assocparams {
+	sctp_assoc_t	sasoc_assoc_id;
+	__u16		sasoc_asocmaxrxt;
+	__u16		sasoc_number_peer_destinations;
+	__u32		sasoc_peer_rwnd;
+	__u32		sasoc_local_rwnd;
+	__u32		sasoc_cookie_life;
+};
+
+/*
+ * 7.1.9 Set Peer Primary Address (SCTP_SET_PEER_PRIMARY_ADDR)
+ *
+ *  Requests that the peer mark the enclosed address as the association
+ *  primary. The enclosed address must be one of the association's
+ *  locally bound addresses. The following structure is used to make a
+ *   set primary request:
+ */
+struct sctp_setpeerprim {
+	sctp_assoc_t            sspp_assoc_id;
+	struct sockaddr_storage sspp_addr;
+} __attribute__((packed, aligned(4)));
+
+/*
+ * 7.1.10 Set Primary Address (SCTP_PRIMARY_ADDR)
+ *
+ *  Requests that the local SCTP stack use the enclosed peer address as
+ *  the association primary. The enclosed address must be one of the
+ *  association peer's addresses. The following structure is used to
+ *  make a set peer primary request:
+ */
+struct sctp_prim {
+	sctp_assoc_t            ssp_assoc_id;
+	struct sockaddr_storage ssp_addr;
+} __attribute__((packed, aligned(4)));
+
+/*
+ * 7.1.11 Set Adaptation Layer Indicator (SCTP_ADAPTATION_LAYER)
+ *
+ * Requests that the local endpoint set the specified Adaptation Layer
+ * Indication parameter for all future INIT and INIT-ACK exchanges.
+ */
+struct sctp_setadaptation {
+	__u32	ssb_adaptation_ind;
+};
+
+/*
+ * 7.1.13 Peer Address Parameters  (SCTP_PEER_ADDR_PARAMS)
+ *
+ *   Applications can enable or disable heartbeats for any peer address
+ *   of an association, modify an address's heartbeat interval, force a
+ *   heartbeat to be sent immediately, and adjust the address's maximum
+ *   number of retransmissions sent before an address is considered
+ *   unreachable. The following structure is used to access and modify an
+ *   address's parameters:
+ */
+enum  sctp_spp_flags {
+	SPP_HB_ENABLE = 1<<0,		/*Enable heartbeats*/
+	SPP_HB_DISABLE = 1<<1,		/*Disable heartbeats*/
+	SPP_HB = SPP_HB_ENABLE | SPP_HB_DISABLE,
+	SPP_HB_DEMAND = 1<<2,		/*Send heartbeat immediately*/
+	SPP_PMTUD_ENABLE = 1<<3,	/*Enable PMTU discovery*/
+	SPP_PMTUD_DISABLE = 1<<4,	/*Disable PMTU discovery*/
+	SPP_PMTUD = SPP_PMTUD_ENABLE | SPP_PMTUD_DISABLE,
+	SPP_SACKDELAY_ENABLE = 1<<5,	/*Enable SACK*/
+	SPP_SACKDELAY_DISABLE = 1<<6,	/*Disable SACK*/
+	SPP_SACKDELAY = SPP_SACKDELAY_ENABLE | SPP_SACKDELAY_DISABLE,
+	SPP_HB_TIME_IS_ZERO = 1<<7,	/* Set HB delay to 0 */
+};
+
+struct sctp_paddrparams {
+	sctp_assoc_t		spp_assoc_id;
+	struct sockaddr_storage	spp_address;
+	__u32			spp_hbinterval;
+	__u16			spp_pathmaxrxt;
+	__u32			spp_pathmtu;
+	__u32			spp_sackdelay;
+	__u32			spp_flags;
+} __attribute__((packed, aligned(4)));
+
+/*
+ * 7.1.18.  Add a chunk that must be authenticated (SCTP_AUTH_CHUNK)
+ *
+ * This set option adds a chunk type that the user is requesting to be
+ * received only in an authenticated way.  Changes to the list of chunks
+ * will only effect future associations on the socket.
+ */
+struct sctp_authchunk {
+	__u8		sauth_chunk;
+};
+
+/*
+ * 7.1.19.  Get or set the list of supported HMAC Identifiers (SCTP_HMAC_IDENT)
+ *
+ * This option gets or sets the list of HMAC algorithms that the local
+ * endpoint requires the peer to use.
+*/
+struct sctp_hmacalgo {
+	__u32		shmac_num_idents;
+	__u16		shmac_idents[];
+};
+
+/*
+ * 7.1.20.  Set a shared key (SCTP_AUTH_KEY)
+ *
+ * This option will set a shared secret key which is used to build an
+ * association shared key.
+ */
+struct sctp_authkey {
+	sctp_assoc_t	sca_assoc_id;
+	__u16		sca_keynumber;
+	__u16		sca_keylength;
+	__u8		sca_key[];
+};
+
+/*
+ * 7.1.21.  Get or set the active shared key (SCTP_AUTH_ACTIVE_KEY)
+ *
+ * This option will get or set the active shared key to be used to build
+ * the association shared key.
+ */
+
+struct sctp_authkeyid {
+	sctp_assoc_t	scact_assoc_id;
+	__u16		scact_keynumber;
+};
+
+
+/*
+ * 7.1.23.  Get or set delayed ack timer (SCTP_DELAYED_SACK)
+ *
+ * This option will effect the way delayed acks are performed.  This
+ * option allows you to get or set the delayed ack time, in
+ * milliseconds.  It also allows changing the delayed ack frequency.
+ * Changing the frequency to 1 disables the delayed sack algorithm.  If
+ * the assoc_id is 0, then this sets or gets the endpoints default
+ * values.  If the assoc_id field is non-zero, then the set or get
+ * effects the specified association for the one to many model (the
+ * assoc_id field is ignored by the one to one model).  Note that if
+ * sack_delay or sack_freq are 0 when setting this option, then the
+ * current values will remain unchanged.
+ */
+struct sctp_sack_info {
+	sctp_assoc_t	sack_assoc_id;
+	uint32_t	sack_delay;
+	uint32_t	sack_freq;
+};
+
+struct sctp_assoc_value {
+    sctp_assoc_t            assoc_id;
+    uint32_t                assoc_value;
+};
+
+/*
+ * 7.2.2 Peer Address Information
+ *
+ *   Applications can retrieve information about a specific peer address
+ *   of an association, including its reachability state, congestion
+ *   window, and retransmission timer values.  This information is
+ *   read-only. The following structure is used to access this
+ *   information:
+ */
+struct sctp_paddrinfo {
+	sctp_assoc_t		spinfo_assoc_id;
+	struct sockaddr_storage	spinfo_address;
+	__s32			spinfo_state;
+	__u32			spinfo_cwnd;
+	__u32			spinfo_srtt;
+	__u32			spinfo_rto;
+	__u32			spinfo_mtu;
+} __attribute__((packed, aligned(4)));
+
+/* Peer addresses's state. */
+/* UNKNOWN: Peer address passed by the upper layer in sendmsg or connect[x]
+ * calls.
+ * UNCONFIRMED: Peer address received in INIT/INIT-ACK address parameters.
+ *              Not yet confirmed by a heartbeat and not available for data
+ *		transfers.
+ * ACTIVE : Peer address confirmed, active and available for data transfers.
+ * INACTIVE: Peer address inactive and not available for data transfers.
+ */
+enum sctp_spinfo_state {
+	SCTP_INACTIVE,
+	SCTP_ACTIVE,
+	SCTP_UNCONFIRMED,
+	SCTP_UNKNOWN = 0xffff  /* Value used for transport state unknown */
+};
+
+/*
+ * 7.2.1 Association Status (SCTP_STATUS)
+ *
+ *   Applications can retrieve current status information about an
+ *   association, including association state, peer receiver window size,
+ *   number of unacked data chunks, and number of data chunks pending
+ *   receipt.  This information is read-only.  The following structure is
+ *   used to access this information:
+ */
+struct sctp_status {
+	sctp_assoc_t		sstat_assoc_id;
+	__s32			sstat_state;
+	__u32			sstat_rwnd;
+	__u16			sstat_unackdata;
+	__u16			sstat_penddata;
+	__u16			sstat_instrms;
+	__u16			sstat_outstrms;
+	__u32			sstat_fragmentation_point;
+	struct sctp_paddrinfo	sstat_primary;
+};
+
+/*
+ * 7.2.3.  Get the list of chunks the peer requires to be authenticated
+ *         (SCTP_PEER_AUTH_CHUNKS)
+ *
+ * This option gets a list of chunks for a specified association that
+ * the peer requires to be received authenticated only.
+ */
+struct sctp_authchunks {
+	sctp_assoc_t	gauth_assoc_id;
+	__u32		gauth_number_of_chunks;
+	uint8_t		gauth_chunks[];
+};
+
+/*
+ * 8.2.6. Get the Current Identifiers of Associations
+ *        (SCTP_GET_ASSOC_ID_LIST)
+ *
+ * This option gets the current list of SCTP association identifiers of
+ * the SCTP associations handled by a one-to-many style socket.
+ */
+struct sctp_assoc_ids {
+	__u32		gaids_number_of_ids;
+	sctp_assoc_t	gaids_assoc_id[];
+};
+
+/*
+ * 8.3, 8.5 get all peer/local addresses in an association.
+ * This parameter struct is used by SCTP_GET_PEER_ADDRS and 
+ * SCTP_GET_LOCAL_ADDRS socket options used internally to implement
+ * sctp_getpaddrs() and sctp_getladdrs() API. 
+ */
+struct sctp_getaddrs_old {
+	sctp_assoc_t            assoc_id;
+	int			addr_num;
+	struct sockaddr		__user *addrs;
+};
+struct sctp_getaddrs {
+	sctp_assoc_t		assoc_id; /*input*/
+	__u32			addr_num; /*output*/
+	__u8			addrs[0]; /*output, variable size*/
+};
+
+/* These are bit fields for msghdr->msg_flags.  See section 5.1.  */
+/* On user space Linux, these live in <bits/socket.h> as an enum.  */
+enum sctp_msg_flags {
+	MSG_NOTIFICATION = 0x8000,
+#define MSG_NOTIFICATION MSG_NOTIFICATION
+};
+
+/*
+ * 8.1 sctp_bindx()
+ *
+ * The flags parameter is formed from the bitwise OR of zero or more of the
+ * following currently defined flags:
+ */
+#define SCTP_BINDX_ADD_ADDR 0x01
+#define SCTP_BINDX_REM_ADDR 0x02
+
+/* This is the structure that is passed as an argument(optval) to
+ * getsockopt(SCTP_SOCKOPT_PEELOFF).
+ */
+typedef struct {
+	sctp_assoc_t associd;
+	int sd;
+} sctp_peeloff_arg_t;
+
+#endif /* __net_sctp_user_h__ */
diff --git a/include/net/secure_seq.h b/include/net/secure_seq.h
new file mode 100644
index 00000000..c2e542b2
--- /dev/null
+++ b/include/net/secure_seq.h
@@ -0,0 +1,20 @@
+#ifndef _NET_SECURE_SEQ
+#define _NET_SECURE_SEQ
+
+#include <linux/types.h>
+
+extern __u32 secure_ip_id(__be32 daddr);
+extern __u32 secure_ipv6_id(const __be32 daddr[4]);
+extern u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport);
+extern u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
+				      __be16 dport);
+extern __u32 secure_tcp_sequence_number(__be32 saddr, __be32 daddr,
+					__be16 sport, __be16 dport);
+extern __u32 secure_tcpv6_sequence_number(const __be32 *saddr, const __be32 *daddr,
+					  __be16 sport, __be16 dport);
+extern u64 secure_dccp_sequence_number(__be32 saddr, __be32 daddr,
+				       __be16 sport, __be16 dport);
+extern u64 secure_dccpv6_sequence_number(__be32 *saddr, __be32 *daddr,
+					 __be16 sport, __be16 dport);
+
+#endif /* _NET_SECURE_SEQ */
diff --git a/include/net/slhc_vj.h b/include/net/slhc_vj.h
new file mode 100644
index 00000000..8716d594
--- /dev/null
+++ b/include/net/slhc_vj.h
@@ -0,0 +1,183 @@
+#ifndef _SLHC_H
+#define _SLHC_H
+/*
+ * Definitions for tcp compression routines.
+ *
+ * $Header: slcompress.h,v 1.10 89/12/31 08:53:02 van Exp $
+ *
+ * Copyright (c) 1989 Regents of the University of California.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms are permitted
+ * provided that the above copyright notice and this paragraph are
+ * duplicated in all such forms and that any documentation,
+ * advertising materials, and other materials related to such
+ * distribution and use acknowledge that the software was developed
+ * by the University of California, Berkeley.  The name of the
+ * University may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ *	Van Jacobson (van@helios.ee.lbl.gov), Dec 31, 1989:
+ *	- Initial distribution.
+ *
+ *
+ * modified for KA9Q Internet Software Package by
+ * Katie Stevens (dkstevens@ucdavis.edu)
+ * University of California, Davis
+ * Computing Services
+ *	- 01-31-90	initial adaptation
+ *
+ *	- Feb 1991	Bill_Simpson@um.cc.umich.edu
+ *			variable number of conversation slots
+ *			allow zero or one slots
+ *			separate routines
+ *			status display
+ */
+
+/*
+ * Compressed packet format:
+ *
+ * The first octet contains the packet type (top 3 bits), TCP
+ * 'push' bit, and flags that indicate which of the 4 TCP sequence
+ * numbers have changed (bottom 5 bits).  The next octet is a
+ * conversation number that associates a saved IP/TCP header with
+ * the compressed packet.  The next two octets are the TCP checksum
+ * from the original datagram.  The next 0 to 15 octets are
+ * sequence number changes, one change per bit set in the header
+ * (there may be no changes and there are two special cases where
+ * the receiver implicitly knows what changed -- see below).
+ *
+ * There are 5 numbers which can change (they are always inserted
+ * in the following order): TCP urgent pointer, window,
+ * acknowledgment, sequence number and IP ID.  (The urgent pointer
+ * is different from the others in that its value is sent, not the
+ * change in value.)  Since typical use of SLIP links is biased
+ * toward small packets (see comments on MTU/MSS below), changes
+ * use a variable length coding with one octet for numbers in the
+ * range 1 - 255 and 3 octets (0, MSB, LSB) for numbers in the
+ * range 256 - 65535 or 0.  (If the change in sequence number or
+ * ack is more than 65535, an uncompressed packet is sent.)
+ */
+
+/*
+ * Packet types (must not conflict with IP protocol version)
+ *
+ * The top nibble of the first octet is the packet type.  There are
+ * three possible types: IP (not proto TCP or tcp with one of the
+ * control flags set); uncompressed TCP (a normal IP/TCP packet but
+ * with the 8-bit protocol field replaced by an 8-bit connection id --
+ * this type of packet syncs the sender & receiver); and compressed
+ * TCP (described above).
+ *
+ * LSB of 4-bit field is TCP "PUSH" bit (a worthless anachronism) and
+ * is logically part of the 4-bit "changes" field that follows.  Top
+ * three bits are actual packet type.  For backward compatibility
+ * and in the interest of conserving bits, numbers are chosen so the
+ * IP protocol version number (4) which normally appears in this nibble
+ * means "IP packet".
+ */
+
+
+#include <linux/ip.h>
+#include <linux/tcp.h>
+
+/* SLIP compression masks for len/vers byte */
+#define SL_TYPE_IP 0x40
+#define SL_TYPE_UNCOMPRESSED_TCP 0x70
+#define SL_TYPE_COMPRESSED_TCP 0x80
+#define SL_TYPE_ERROR 0x00
+
+/* Bits in first octet of compressed packet */
+#define NEW_C	0x40	/* flag bits for what changed in a packet */
+#define NEW_I	0x20
+#define NEW_S	0x08
+#define NEW_A	0x04
+#define NEW_W	0x02
+#define NEW_U	0x01
+
+/* reserved, special-case values of above */
+#define SPECIAL_I (NEW_S|NEW_W|NEW_U)		/* echoed interactive traffic */
+#define SPECIAL_D (NEW_S|NEW_A|NEW_W|NEW_U)	/* unidirectional data */
+#define SPECIALS_MASK (NEW_S|NEW_A|NEW_W|NEW_U)
+
+#define TCP_PUSH_BIT 0x10
+
+/*
+ * data type and sizes conversion assumptions:
+ *
+ *	VJ code		KA9Q style	generic
+ *	u_char		byte_t		unsigned char	 8 bits
+ *	u_short		int16		unsigned short	16 bits
+ *	u_int		int16		unsigned short	16 bits
+ *	u_long		unsigned long	unsigned long	32 bits
+ *	int		int32		long		32 bits
+ */
+
+typedef __u8 byte_t;
+typedef __u32 int32;
+
+/*
+ * "state" data for each active tcp conversation on the wire.  This is
+ * basically a copy of the entire IP/TCP header from the last packet
+ * we saw from the conversation together with a small identifier
+ * the transmit & receive ends of the line use to locate saved header.
+ */
+struct cstate {
+	byte_t	cs_this;	/* connection id number (xmit) */
+	struct cstate *next;	/* next in ring (xmit) */
+	struct iphdr cs_ip;	/* ip/tcp hdr from most recent packet */
+	struct tcphdr cs_tcp;
+	unsigned char cs_ipopt[64];
+	unsigned char cs_tcpopt[64];
+	int cs_hsize;
+};
+#define NULLSLSTATE	(struct cstate *)0
+
+/*
+ * all the state data for one serial line (we need one of these per line).
+ */
+struct slcompress {
+	struct cstate *tstate;	/* transmit connection states (array)*/
+	struct cstate *rstate;	/* receive connection states (array)*/
+
+	byte_t tslot_limit;	/* highest transmit slot id (0-l)*/
+	byte_t rslot_limit;	/* highest receive slot id (0-l)*/
+
+	byte_t xmit_oldest;	/* oldest xmit in ring */
+	byte_t xmit_current;	/* most recent xmit id */
+	byte_t recv_current;	/* most recent rcvd id */
+
+	byte_t flags;
+#define SLF_TOSS	0x01	/* tossing rcvd frames until id received */
+
+	int32 sls_o_nontcp;	/* outbound non-TCP packets */
+	int32 sls_o_tcp;	/* outbound TCP packets */
+	int32 sls_o_uncompressed;	/* outbound uncompressed packets */
+	int32 sls_o_compressed;	/* outbound compressed packets */
+	int32 sls_o_searches;	/* searches for connection state */
+	int32 sls_o_misses;	/* times couldn't find conn. state */
+
+	int32 sls_i_uncompressed;	/* inbound uncompressed packets */
+	int32 sls_i_compressed;	/* inbound compressed packets */
+	int32 sls_i_error;	/* inbound error packets */
+	int32 sls_i_tossed;	/* inbound packets tossed because of error */
+
+	int32 sls_i_runt;
+	int32 sls_i_badcheck;
+};
+#define NULLSLCOMPR	(struct slcompress *)0
+
+/* In slhc.c: */
+struct slcompress *slhc_init(int rslots, int tslots);
+void slhc_free(struct slcompress *comp);
+
+int slhc_compress(struct slcompress *comp, unsigned char *icp, int isize,
+		  unsigned char *ocp, unsigned char **cpp, int compress_cid);
+int slhc_uncompress(struct slcompress *comp, unsigned char *icp, int isize);
+int slhc_remember(struct slcompress *comp, unsigned char *icp, int isize);
+int slhc_toss(struct slcompress *comp);
+
+#endif	/* _SLHC_H */
diff --git a/include/net/snmp.h b/include/net/snmp.h
new file mode 100644
index 00000000..0147b901
--- /dev/null
+++ b/include/net/snmp.h
@@ -0,0 +1,217 @@
+/*
+ *
+ *		SNMP MIB entries for the IP subsystem.
+ *		
+ *		Alan Cox <gw4pts@gw4pts.ampr.org>
+ *
+ *		We don't chose to implement SNMP in the kernel (this would
+ *		be silly as SNMP is a pain in the backside in places). We do
+ *		however need to collect the MIB statistics and export them
+ *		out of /proc (eventually)
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ */
+ 
+#ifndef _SNMP_H
+#define _SNMP_H
+
+#include <linux/cache.h>
+#include <linux/snmp.h>
+#include <linux/smp.h>
+
+/*
+ * Mibs are stored in array of unsigned long.
+ */
+/*
+ * struct snmp_mib{}
+ *  - list of entries for particular API (such as /proc/net/snmp)
+ *  - name of entries.
+ */
+struct snmp_mib {
+	const char *name;
+	int entry;
+};
+
+#define SNMP_MIB_ITEM(_name,_entry)	{	\
+	.name = _name,				\
+	.entry = _entry,			\
+}
+
+#define SNMP_MIB_SENTINEL {	\
+	.name = NULL,		\
+	.entry = 0,		\
+}
+
+/*
+ * We use unsigned longs for most mibs but u64 for ipstats.
+ */
+#include <linux/u64_stats_sync.h>
+
+/* IPstats */
+#define IPSTATS_MIB_MAX	__IPSTATS_MIB_MAX
+struct ipstats_mib {
+	/* mibs[] must be first field of struct ipstats_mib */
+	u64		mibs[IPSTATS_MIB_MAX];
+	struct u64_stats_sync syncp;
+};
+
+/* ICMP */
+#define ICMP_MIB_MAX	__ICMP_MIB_MAX
+struct icmp_mib {
+	unsigned long	mibs[ICMP_MIB_MAX];
+};
+
+#define ICMPMSG_MIB_MAX	__ICMPMSG_MIB_MAX
+struct icmpmsg_mib {
+	atomic_long_t	mibs[ICMPMSG_MIB_MAX];
+};
+
+/* ICMP6 (IPv6-ICMP) */
+#define ICMP6_MIB_MAX	__ICMP6_MIB_MAX
+/* per network ns counters */
+struct icmpv6_mib {
+	unsigned long	mibs[ICMP6_MIB_MAX];
+};
+/* per device counters, (shared on all cpus) */
+struct icmpv6_mib_device {
+	atomic_long_t	mibs[ICMP6_MIB_MAX];
+};
+
+#define ICMP6MSG_MIB_MAX  __ICMP6MSG_MIB_MAX
+/* per network ns counters */
+struct icmpv6msg_mib {
+	atomic_long_t	mibs[ICMP6MSG_MIB_MAX];
+};
+/* per device counters, (shared on all cpus) */
+struct icmpv6msg_mib_device {
+	atomic_long_t	mibs[ICMP6MSG_MIB_MAX];
+};
+
+
+/* TCP */
+#define TCP_MIB_MAX	__TCP_MIB_MAX
+struct tcp_mib {
+	unsigned long	mibs[TCP_MIB_MAX];
+};
+
+/* UDP */
+#define UDP_MIB_MAX	__UDP_MIB_MAX
+struct udp_mib {
+	unsigned long	mibs[UDP_MIB_MAX];
+};
+
+/* Linux */
+#define LINUX_MIB_MAX	__LINUX_MIB_MAX
+struct linux_mib {
+	unsigned long	mibs[LINUX_MIB_MAX];
+};
+
+/* Linux Xfrm */
+#define LINUX_MIB_XFRMMAX	__LINUX_MIB_XFRMMAX
+struct linux_xfrm_mib {
+	unsigned long	mibs[LINUX_MIB_XFRMMAX];
+};
+
+#define SNMP_ARRAY_SZ 1
+
+#define DEFINE_SNMP_STAT(type, name)	\
+	__typeof__(type) __percpu *name[SNMP_ARRAY_SZ]
+#define DEFINE_SNMP_STAT_ATOMIC(type, name)	\
+	__typeof__(type) *name
+#define DECLARE_SNMP_STAT(type, name)	\
+	extern __typeof__(type) __percpu *name[SNMP_ARRAY_SZ]
+
+#define SNMP_INC_STATS_BH(mib, field)	\
+			__this_cpu_inc(mib[0]->mibs[field])
+
+#define SNMP_INC_STATS_USER(mib, field)	\
+			this_cpu_inc(mib[0]->mibs[field])
+
+#define SNMP_INC_STATS_ATOMIC_LONG(mib, field)	\
+			atomic_long_inc(&mib->mibs[field])
+
+#define SNMP_INC_STATS(mib, field)	\
+			this_cpu_inc(mib[0]->mibs[field])
+
+#define SNMP_DEC_STATS(mib, field)	\
+			this_cpu_dec(mib[0]->mibs[field])
+
+#define SNMP_ADD_STATS_BH(mib, field, addend)	\
+			__this_cpu_add(mib[0]->mibs[field], addend)
+
+#define SNMP_ADD_STATS_USER(mib, field, addend)	\
+			this_cpu_add(mib[0]->mibs[field], addend)
+
+#define SNMP_ADD_STATS(mib, field, addend)	\
+			this_cpu_add(mib[0]->mibs[field], addend)
+/*
+ * Use "__typeof__(*mib[0]) *ptr" instead of "__typeof__(mib[0]) ptr"
+ * to make @ptr a non-percpu pointer.
+ */
+#define SNMP_UPD_PO_STATS(mib, basefield, addend)	\
+	do { \
+		this_cpu_inc(mib[0]->mibs[basefield##PKTS]);		\
+		this_cpu_add(mib[0]->mibs[basefield##OCTETS], addend);	\
+	} while (0)
+#define SNMP_UPD_PO_STATS_BH(mib, basefield, addend)	\
+	do { \
+		__this_cpu_inc(mib[0]->mibs[basefield##PKTS]);		\
+		__this_cpu_add(mib[0]->mibs[basefield##OCTETS], addend);	\
+	} while (0)
+
+
+#if BITS_PER_LONG==32
+
+#define SNMP_ADD_STATS64_BH(mib, field, addend) 			\
+	do {								\
+		__typeof__(*mib[0]) *ptr = __this_cpu_ptr((mib)[0]);	\
+		u64_stats_update_begin(&ptr->syncp);			\
+		ptr->mibs[field] += addend;				\
+		u64_stats_update_end(&ptr->syncp);			\
+	} while (0)
+
+#define SNMP_ADD_STATS64_USER(mib, field, addend) 			\
+	do {								\
+		local_bh_disable();					\
+		SNMP_ADD_STATS64_BH(mib, field, addend);		\
+		local_bh_enable();					\
+	} while (0)
+
+#define SNMP_ADD_STATS64(mib, field, addend)				\
+		SNMP_ADD_STATS64_USER(mib, field, addend)
+
+#define SNMP_INC_STATS64_BH(mib, field) SNMP_ADD_STATS64_BH(mib, field, 1)
+#define SNMP_INC_STATS64_USER(mib, field) SNMP_ADD_STATS64_USER(mib, field, 1)
+#define SNMP_INC_STATS64(mib, field) SNMP_ADD_STATS64(mib, field, 1)
+#define SNMP_UPD_PO_STATS64_BH(mib, basefield, addend)			\
+	do {								\
+		__typeof__(*mib[0]) *ptr;				\
+		ptr = __this_cpu_ptr((mib)[0]);				\
+		u64_stats_update_begin(&ptr->syncp);			\
+		ptr->mibs[basefield##PKTS]++;				\
+		ptr->mibs[basefield##OCTETS] += addend;			\
+		u64_stats_update_end(&ptr->syncp);			\
+	} while (0)
+#define SNMP_UPD_PO_STATS64(mib, basefield, addend)			\
+	do {								\
+		local_bh_disable();					\
+		SNMP_UPD_PO_STATS64_BH(mib, basefield, addend);		\
+		local_bh_enable();					\
+	} while (0)
+#else
+#define SNMP_INC_STATS64_BH(mib, field)		SNMP_INC_STATS_BH(mib, field)
+#define SNMP_INC_STATS64_USER(mib, field)	SNMP_INC_STATS_USER(mib, field)
+#define SNMP_INC_STATS64(mib, field)		SNMP_INC_STATS(mib, field)
+#define SNMP_DEC_STATS64(mib, field)		SNMP_DEC_STATS(mib, field)
+#define SNMP_ADD_STATS64_BH(mib, field, addend) SNMP_ADD_STATS_BH(mib, field, addend)
+#define SNMP_ADD_STATS64_USER(mib, field, addend) SNMP_ADD_STATS_USER(mib, field, addend)
+#define SNMP_ADD_STATS64(mib, field, addend)	SNMP_ADD_STATS(mib, field, addend)
+#define SNMP_UPD_PO_STATS64(mib, basefield, addend) SNMP_UPD_PO_STATS(mib, basefield, addend)
+#define SNMP_UPD_PO_STATS64_BH(mib, basefield, addend) SNMP_UPD_PO_STATS_BH(mib, basefield, addend)
+#endif
+
+#endif
diff --git a/include/net/sock.h b/include/net/sock.h
new file mode 100644
index 00000000..5a0a58ac
--- /dev/null
+++ b/include/net/sock.h
@@ -0,0 +1,2157 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the AF_INET socket handler.
+ *
+ * Version:	@(#)sock.h	1.0.4	05/13/93
+ *
+ * Authors:	Ross Biro
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Corey Minyard <wf-rch!minyard@relay.EU.net>
+ *		Florian La Roche <flla@stud.uni-sb.de>
+ *
+ * Fixes:
+ *		Alan Cox	:	Volatiles in skbuff pointers. See
+ *					skbuff comments. May be overdone,
+ *					better to prove they can be removed
+ *					than the reverse.
+ *		Alan Cox	:	Added a zapped field for tcp to note
+ *					a socket is reset and must stay shut up
+ *		Alan Cox	:	New fields for options
+ *	Pauline Middelink	:	identd support
+ *		Alan Cox	:	Eliminate low level recv/recvfrom
+ *		David S. Miller	:	New socket lookup architecture.
+ *              Steve Whitehouse:       Default routines for sock_ops
+ *              Arnaldo C. Melo :	removed net_pinfo, tp_pinfo and made
+ *              			protinfo be just a void pointer, as the
+ *              			protocol specific parts were moved to
+ *              			respective headers and ipv4/v6, etc now
+ *              			use private slabcaches for its socks
+ *              Pedro Hortas	:	New flags field for socket options
+ *
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _SOCK_H
+#define _SOCK_H
+
+#include <linux/hardirq.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/list_nulls.h>
+#include <linux/timer.h>
+#include <linux/cache.h>
+#include <linux/lockdep.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>	/* struct sk_buff */
+#include <linux/mm.h>
+#include <linux/security.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/memcontrol.h>
+#include <linux/res_counter.h>
+#include <linux/static_key.h>
+#include <linux/aio.h>
+#include <linux/sched.h>
+
+#include <linux/filter.h>
+#include <linux/rculist_nulls.h>
+#include <linux/poll.h>
+
+#include <linux/atomic.h>
+#include <net/dst.h>
+#include <net/checksum.h>
+
+struct cgroup;
+struct cgroup_subsys;
+#ifdef CONFIG_NET
+int mem_cgroup_sockets_init(struct cgroup *cgrp, struct cgroup_subsys *ss);
+void mem_cgroup_sockets_destroy(struct cgroup *cgrp);
+#else
+static inline
+int mem_cgroup_sockets_init(struct cgroup *cgrp, struct cgroup_subsys *ss)
+{
+	return 0;
+}
+static inline
+void mem_cgroup_sockets_destroy(struct cgroup *cgrp)
+{
+}
+#endif
+/*
+ * This structure really needs to be cleaned up.
+ * Most of it is for TCP, and not used by any of
+ * the other protocols.
+ */
+
+/* Define this to get the SOCK_DBG debugging facility. */
+#define SOCK_DEBUGGING
+#ifdef SOCK_DEBUGGING
+#define SOCK_DEBUG(sk, msg...) do { if ((sk) && sock_flag((sk), SOCK_DBG)) \
+					printk(KERN_DEBUG msg); } while (0)
+#else
+/* Validate arguments and do nothing */
+static inline __printf(2, 3)
+void SOCK_DEBUG(struct sock *sk, const char *msg, ...)
+{
+}
+#endif
+
+/* This is the per-socket lock.  The spinlock provides a synchronization
+ * between user contexts and software interrupt processing, whereas the
+ * mini-semaphore synchronizes multiple users amongst themselves.
+ */
+typedef struct {
+	spinlock_t		slock;
+	int			owned;
+	wait_queue_head_t	wq;
+	/*
+	 * We express the mutex-alike socket_lock semantics
+	 * to the lock validator by explicitly managing
+	 * the slock as a lock variant (in addition to
+	 * the slock itself):
+	 */
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	struct lockdep_map dep_map;
+#endif
+} socket_lock_t;
+
+struct sock;
+struct proto;
+struct net;
+
+/**
+ *	struct sock_common - minimal network layer representation of sockets
+ *	@skc_daddr: Foreign IPv4 addr
+ *	@skc_rcv_saddr: Bound local IPv4 addr
+ *	@skc_hash: hash value used with various protocol lookup tables
+ *	@skc_u16hashes: two u16 hash values used by UDP lookup tables
+ *	@skc_family: network address family
+ *	@skc_state: Connection state
+ *	@skc_reuse: %SO_REUSEADDR setting
+ *	@skc_bound_dev_if: bound device index if != 0
+ *	@skc_bind_node: bind hash linkage for various protocol lookup tables
+ *	@skc_portaddr_node: second hash linkage for UDP/UDP-Lite protocol
+ *	@skc_prot: protocol handlers inside a network family
+ *	@skc_net: reference to the network namespace of this socket
+ *	@skc_node: main hash linkage for various protocol lookup tables
+ *	@skc_nulls_node: main hash linkage for TCP/UDP/UDP-Lite protocol
+ *	@skc_tx_queue_mapping: tx queue number for this connection
+ *	@skc_refcnt: reference count
+ *
+ *	This is the minimal network layer representation of sockets, the header
+ *	for struct sock and struct inet_timewait_sock.
+ */
+struct sock_common {
+	/* skc_daddr and skc_rcv_saddr must be grouped :
+	 * cf INET_MATCH() and INET_TW_MATCH()
+	 */
+	__be32			skc_daddr;
+	__be32			skc_rcv_saddr;
+
+	union  {
+		unsigned int	skc_hash;
+		__u16		skc_u16hashes[2];
+	};
+	unsigned short		skc_family;
+	volatile unsigned char	skc_state;
+	unsigned char		skc_reuse;
+	int			skc_bound_dev_if;
+	union {
+		struct hlist_node	skc_bind_node;
+		struct hlist_nulls_node skc_portaddr_node;
+	};
+	struct proto		*skc_prot;
+#ifdef CONFIG_NET_NS
+	struct net	 	*skc_net;
+#endif
+	/*
+	 * fields between dontcopy_begin/dontcopy_end
+	 * are not copied in sock_copy()
+	 */
+	/* private: */
+	int			skc_dontcopy_begin[0];
+	/* public: */
+	union {
+		struct hlist_node	skc_node;
+		struct hlist_nulls_node skc_nulls_node;
+	};
+	int			skc_tx_queue_mapping;
+	atomic_t		skc_refcnt;
+	/* private: */
+	int                     skc_dontcopy_end[0];
+	/* public: */
+};
+
+struct cg_proto;
+/**
+  *	struct sock - network layer representation of sockets
+  *	@__sk_common: shared layout with inet_timewait_sock
+  *	@sk_shutdown: mask of %SEND_SHUTDOWN and/or %RCV_SHUTDOWN
+  *	@sk_userlocks: %SO_SNDBUF and %SO_RCVBUF settings
+  *	@sk_lock:	synchronizer
+  *	@sk_rcvbuf: size of receive buffer in bytes
+  *	@sk_wq: sock wait queue and async head
+  *	@sk_dst_cache: destination cache
+  *	@sk_dst_lock: destination cache lock
+  *	@sk_policy: flow policy
+  *	@sk_receive_queue: incoming packets
+  *	@sk_wmem_alloc: transmit queue bytes committed
+  *	@sk_write_queue: Packet sending queue
+  *	@sk_async_wait_queue: DMA copied packets
+  *	@sk_omem_alloc: "o" is "option" or "other"
+  *	@sk_wmem_queued: persistent queue size
+  *	@sk_forward_alloc: space allocated forward
+  *	@sk_allocation: allocation mode
+  *	@sk_sndbuf: size of send buffer in bytes
+  *	@sk_flags: %SO_LINGER (l_onoff), %SO_BROADCAST, %SO_KEEPALIVE,
+  *		   %SO_OOBINLINE settings, %SO_TIMESTAMPING settings
+  *	@sk_no_check: %SO_NO_CHECK setting, wether or not checkup packets
+  *	@sk_route_caps: route capabilities (e.g. %NETIF_F_TSO)
+  *	@sk_route_nocaps: forbidden route capabilities (e.g NETIF_F_GSO_MASK)
+  *	@sk_gso_type: GSO type (e.g. %SKB_GSO_TCPV4)
+  *	@sk_gso_max_size: Maximum GSO segment size to build
+  *	@sk_lingertime: %SO_LINGER l_linger setting
+  *	@sk_backlog: always used with the per-socket spinlock held
+  *	@sk_callback_lock: used with the callbacks in the end of this struct
+  *	@sk_error_queue: rarely used
+  *	@sk_prot_creator: sk_prot of original sock creator (see ipv6_setsockopt,
+  *			  IPV6_ADDRFORM for instance)
+  *	@sk_err: last error
+  *	@sk_err_soft: errors that don't cause failure but are the cause of a
+  *		      persistent failure not just 'timed out'
+  *	@sk_drops: raw/udp drops counter
+  *	@sk_ack_backlog: current listen backlog
+  *	@sk_max_ack_backlog: listen backlog set in listen()
+  *	@sk_priority: %SO_PRIORITY setting
+  *	@sk_cgrp_prioidx: socket group's priority map index
+  *	@sk_type: socket type (%SOCK_STREAM, etc)
+  *	@sk_protocol: which protocol this socket belongs in this network family
+  *	@sk_peer_pid: &struct pid for this socket's peer
+  *	@sk_peer_cred: %SO_PEERCRED setting
+  *	@sk_rcvlowat: %SO_RCVLOWAT setting
+  *	@sk_rcvtimeo: %SO_RCVTIMEO setting
+  *	@sk_sndtimeo: %SO_SNDTIMEO setting
+  *	@sk_rxhash: flow hash received from netif layer
+  *	@sk_filter: socket filtering instructions
+  *	@sk_protinfo: private area, net family specific, when not using slab
+  *	@sk_timer: sock cleanup timer
+  *	@sk_stamp: time stamp of last packet received
+  *	@sk_socket: Identd and reporting IO signals
+  *	@sk_user_data: RPC layer private data
+  *	@sk_sndmsg_page: cached page for sendmsg
+  *	@sk_sndmsg_off: cached offset for sendmsg
+  *	@sk_peek_off: current peek_offset value
+  *	@sk_send_head: front of stuff to transmit
+  *	@sk_security: used by security modules
+  *	@sk_mark: generic packet mark
+  *	@sk_classid: this socket's cgroup classid
+  *	@sk_cgrp: this socket's cgroup-specific proto data
+  *	@sk_write_pending: a write to stream socket waits to start
+  *	@sk_state_change: callback to indicate change in the state of the sock
+  *	@sk_data_ready: callback to indicate there is data to be processed
+  *	@sk_write_space: callback to indicate there is bf sending space available
+  *	@sk_error_report: callback to indicate errors (e.g. %MSG_ERRQUEUE)
+  *	@sk_backlog_rcv: callback to process the backlog
+  *	@sk_destruct: called at sock freeing time, i.e. when all refcnt == 0
+ */
+struct sock {
+	/*
+	 * Now struct inet_timewait_sock also uses sock_common, so please just
+	 * don't add nothing before this first member (__sk_common) --acme
+	 */
+	struct sock_common	__sk_common;
+#define sk_node			__sk_common.skc_node
+#define sk_nulls_node		__sk_common.skc_nulls_node
+#define sk_refcnt		__sk_common.skc_refcnt
+#define sk_tx_queue_mapping	__sk_common.skc_tx_queue_mapping
+
+#define sk_dontcopy_begin	__sk_common.skc_dontcopy_begin
+#define sk_dontcopy_end		__sk_common.skc_dontcopy_end
+#define sk_hash			__sk_common.skc_hash
+#define sk_family		__sk_common.skc_family
+#define sk_state		__sk_common.skc_state
+#define sk_reuse		__sk_common.skc_reuse
+#define sk_bound_dev_if		__sk_common.skc_bound_dev_if
+#define sk_bind_node		__sk_common.skc_bind_node
+#define sk_prot			__sk_common.skc_prot
+#define sk_net			__sk_common.skc_net
+	socket_lock_t		sk_lock;
+	struct sk_buff_head	sk_receive_queue;
+	/*
+	 * The backlog queue is special, it is always used with
+	 * the per-socket spinlock held and requires low latency
+	 * access. Therefore we special case it's implementation.
+	 * Note : rmem_alloc is in this structure to fill a hole
+	 * on 64bit arches, not because its logically part of
+	 * backlog.
+	 */
+	struct {
+		atomic_t	rmem_alloc;
+		int		len;
+		struct sk_buff	*head;
+		struct sk_buff	*tail;
+	} sk_backlog;
+#define sk_rmem_alloc sk_backlog.rmem_alloc
+	int			sk_forward_alloc;
+#ifdef CONFIG_RPS
+	__u32			sk_rxhash;
+#endif
+	atomic_t		sk_drops;
+	int			sk_rcvbuf;
+
+	struct sk_filter __rcu	*sk_filter;
+	struct socket_wq __rcu	*sk_wq;
+
+#ifdef CONFIG_NET_DMA
+	struct sk_buff_head	sk_async_wait_queue;
+#endif
+
+#ifdef CONFIG_XFRM
+	struct xfrm_policy	*sk_policy[2];
+#endif
+	unsigned long 		sk_flags;
+	struct dst_entry	*sk_dst_cache;
+	spinlock_t		sk_dst_lock;
+	atomic_t		sk_wmem_alloc;
+	atomic_t		sk_omem_alloc;
+	int			sk_sndbuf;
+	struct sk_buff_head	sk_write_queue;
+	kmemcheck_bitfield_begin(flags);
+	unsigned int		sk_shutdown  : 2,
+				sk_no_check  : 2,
+				sk_userlocks : 4,
+				sk_protocol  : 8,
+				sk_type      : 16;
+	kmemcheck_bitfield_end(flags);
+	int			sk_wmem_queued;
+	gfp_t			sk_allocation;
+	netdev_features_t	sk_route_caps;
+	netdev_features_t	sk_route_nocaps;
+	int			sk_gso_type;
+	unsigned int		sk_gso_max_size;
+	int			sk_rcvlowat;
+	unsigned long	        sk_lingertime;
+	struct sk_buff_head	sk_error_queue;
+	struct proto		*sk_prot_creator;
+	rwlock_t		sk_callback_lock;
+	int			sk_err,
+				sk_err_soft;
+	unsigned short		sk_ack_backlog;
+	unsigned short		sk_max_ack_backlog;
+	__u32			sk_priority;
+#ifdef CONFIG_CGROUPS
+	__u32			sk_cgrp_prioidx;
+#endif
+	struct pid		*sk_peer_pid;
+	const struct cred	*sk_peer_cred;
+	long			sk_rcvtimeo;
+	long			sk_sndtimeo;
+	void			*sk_protinfo;
+	struct timer_list	sk_timer;
+	ktime_t			sk_stamp;
+	struct socket		*sk_socket;
+	void			*sk_user_data;
+	struct page		*sk_sndmsg_page;
+	struct sk_buff		*sk_send_head;
+	__u32			sk_sndmsg_off;
+	__s32			sk_peek_off;
+	int			sk_write_pending;
+#ifdef CONFIG_SECURITY
+	void			*sk_security;
+#endif
+	__u32			sk_mark;
+	u32			sk_classid;
+	struct cg_proto		*sk_cgrp;
+	void			(*sk_state_change)(struct sock *sk);
+	void			(*sk_data_ready)(struct sock *sk, int bytes);
+	void			(*sk_write_space)(struct sock *sk);
+	void			(*sk_error_report)(struct sock *sk);
+  	int			(*sk_backlog_rcv)(struct sock *sk,
+						  struct sk_buff *skb);  
+	void                    (*sk_destruct)(struct sock *sk);
+};
+
+static inline int sk_peek_offset(struct sock *sk, int flags)
+{
+	if ((flags & MSG_PEEK) && (sk->sk_peek_off >= 0))
+		return sk->sk_peek_off;
+	else
+		return 0;
+}
+
+static inline void sk_peek_offset_bwd(struct sock *sk, int val)
+{
+	if (sk->sk_peek_off >= 0) {
+		if (sk->sk_peek_off >= val)
+			sk->sk_peek_off -= val;
+		else
+			sk->sk_peek_off = 0;
+	}
+}
+
+static inline void sk_peek_offset_fwd(struct sock *sk, int val)
+{
+	if (sk->sk_peek_off >= 0)
+		sk->sk_peek_off += val;
+}
+
+/*
+ * Hashed lists helper routines
+ */
+static inline struct sock *sk_entry(const struct hlist_node *node)
+{
+	return hlist_entry(node, struct sock, sk_node);
+}
+
+static inline struct sock *__sk_head(const struct hlist_head *head)
+{
+	return hlist_entry(head->first, struct sock, sk_node);
+}
+
+static inline struct sock *sk_head(const struct hlist_head *head)
+{
+	return hlist_empty(head) ? NULL : __sk_head(head);
+}
+
+static inline struct sock *__sk_nulls_head(const struct hlist_nulls_head *head)
+{
+	return hlist_nulls_entry(head->first, struct sock, sk_nulls_node);
+}
+
+static inline struct sock *sk_nulls_head(const struct hlist_nulls_head *head)
+{
+	return hlist_nulls_empty(head) ? NULL : __sk_nulls_head(head);
+}
+
+static inline struct sock *sk_next(const struct sock *sk)
+{
+	return sk->sk_node.next ?
+		hlist_entry(sk->sk_node.next, struct sock, sk_node) : NULL;
+}
+
+static inline struct sock *sk_nulls_next(const struct sock *sk)
+{
+	return (!is_a_nulls(sk->sk_nulls_node.next)) ?
+		hlist_nulls_entry(sk->sk_nulls_node.next,
+				  struct sock, sk_nulls_node) :
+		NULL;
+}
+
+static inline int sk_unhashed(const struct sock *sk)
+{
+	return hlist_unhashed(&sk->sk_node);
+}
+
+static inline int sk_hashed(const struct sock *sk)
+{
+	return !sk_unhashed(sk);
+}
+
+static __inline__ void sk_node_init(struct hlist_node *node)
+{
+	node->pprev = NULL;
+}
+
+static __inline__ void sk_nulls_node_init(struct hlist_nulls_node *node)
+{
+	node->pprev = NULL;
+}
+
+static __inline__ void __sk_del_node(struct sock *sk)
+{
+	__hlist_del(&sk->sk_node);
+}
+
+/* NB: equivalent to hlist_del_init_rcu */
+static __inline__ int __sk_del_node_init(struct sock *sk)
+{
+	if (sk_hashed(sk)) {
+		__sk_del_node(sk);
+		sk_node_init(&sk->sk_node);
+		return 1;
+	}
+	return 0;
+}
+
+/* Grab socket reference count. This operation is valid only
+   when sk is ALREADY grabbed f.e. it is found in hash table
+   or a list and the lookup is made under lock preventing hash table
+   modifications.
+ */
+
+static inline void sock_hold(struct sock *sk)
+{
+	atomic_inc(&sk->sk_refcnt);
+}
+
+/* Ungrab socket in the context, which assumes that socket refcnt
+   cannot hit zero, f.e. it is true in context of any socketcall.
+ */
+static inline void __sock_put(struct sock *sk)
+{
+	atomic_dec(&sk->sk_refcnt);
+}
+
+static __inline__ int sk_del_node_init(struct sock *sk)
+{
+	int rc = __sk_del_node_init(sk);
+
+	if (rc) {
+		/* paranoid for a while -acme */
+		WARN_ON(atomic_read(&sk->sk_refcnt) == 1);
+		__sock_put(sk);
+	}
+	return rc;
+}
+#define sk_del_node_init_rcu(sk)	sk_del_node_init(sk)
+
+static __inline__ int __sk_nulls_del_node_init_rcu(struct sock *sk)
+{
+	if (sk_hashed(sk)) {
+		hlist_nulls_del_init_rcu(&sk->sk_nulls_node);
+		return 1;
+	}
+	return 0;
+}
+
+static __inline__ int sk_nulls_del_node_init_rcu(struct sock *sk)
+{
+	int rc = __sk_nulls_del_node_init_rcu(sk);
+
+	if (rc) {
+		/* paranoid for a while -acme */
+		WARN_ON(atomic_read(&sk->sk_refcnt) == 1);
+		__sock_put(sk);
+	}
+	return rc;
+}
+
+static __inline__ void __sk_add_node(struct sock *sk, struct hlist_head *list)
+{
+	hlist_add_head(&sk->sk_node, list);
+}
+
+static __inline__ void sk_add_node(struct sock *sk, struct hlist_head *list)
+{
+	sock_hold(sk);
+	__sk_add_node(sk, list);
+}
+
+static __inline__ void sk_add_node_rcu(struct sock *sk, struct hlist_head *list)
+{
+	sock_hold(sk);
+	hlist_add_head_rcu(&sk->sk_node, list);
+}
+
+static __inline__ void __sk_nulls_add_node_rcu(struct sock *sk, struct hlist_nulls_head *list)
+{
+	hlist_nulls_add_head_rcu(&sk->sk_nulls_node, list);
+}
+
+static __inline__ void sk_nulls_add_node_rcu(struct sock *sk, struct hlist_nulls_head *list)
+{
+	sock_hold(sk);
+	__sk_nulls_add_node_rcu(sk, list);
+}
+
+static __inline__ void __sk_del_bind_node(struct sock *sk)
+{
+	__hlist_del(&sk->sk_bind_node);
+}
+
+static __inline__ void sk_add_bind_node(struct sock *sk,
+					struct hlist_head *list)
+{
+	hlist_add_head(&sk->sk_bind_node, list);
+}
+
+#define sk_for_each(__sk, node, list) \
+	hlist_for_each_entry(__sk, node, list, sk_node)
+#define sk_for_each_rcu(__sk, node, list) \
+	hlist_for_each_entry_rcu(__sk, node, list, sk_node)
+#define sk_nulls_for_each(__sk, node, list) \
+	hlist_nulls_for_each_entry(__sk, node, list, sk_nulls_node)
+#define sk_nulls_for_each_rcu(__sk, node, list) \
+	hlist_nulls_for_each_entry_rcu(__sk, node, list, sk_nulls_node)
+#define sk_for_each_from(__sk, node) \
+	if (__sk && ({ node = &(__sk)->sk_node; 1; })) \
+		hlist_for_each_entry_from(__sk, node, sk_node)
+#define sk_nulls_for_each_from(__sk, node) \
+	if (__sk && ({ node = &(__sk)->sk_nulls_node; 1; })) \
+		hlist_nulls_for_each_entry_from(__sk, node, sk_nulls_node)
+#define sk_for_each_safe(__sk, node, tmp, list) \
+	hlist_for_each_entry_safe(__sk, node, tmp, list, sk_node)
+#define sk_for_each_bound(__sk, node, list) \
+	hlist_for_each_entry(__sk, node, list, sk_bind_node)
+
+/* Sock flags */
+enum sock_flags {
+	SOCK_DEAD,
+	SOCK_DONE,
+	SOCK_URGINLINE,
+	SOCK_KEEPOPEN,
+	SOCK_LINGER,
+	SOCK_DESTROY,
+	SOCK_BROADCAST,
+	SOCK_TIMESTAMP,
+	SOCK_ZAPPED,
+	SOCK_USE_WRITE_QUEUE, /* whether to call sk->sk_write_space in sock_wfree */
+	SOCK_DBG, /* %SO_DEBUG setting */
+	SOCK_RCVTSTAMP, /* %SO_TIMESTAMP setting */
+	SOCK_RCVTSTAMPNS, /* %SO_TIMESTAMPNS setting */
+	SOCK_LOCALROUTE, /* route locally only, %SO_DONTROUTE setting */
+	SOCK_QUEUE_SHRUNK, /* write queue has been shrunk recently */
+	SOCK_TIMESTAMPING_TX_HARDWARE,  /* %SOF_TIMESTAMPING_TX_HARDWARE */
+	SOCK_TIMESTAMPING_TX_SOFTWARE,  /* %SOF_TIMESTAMPING_TX_SOFTWARE */
+	SOCK_TIMESTAMPING_RX_HARDWARE,  /* %SOF_TIMESTAMPING_RX_HARDWARE */
+	SOCK_TIMESTAMPING_RX_SOFTWARE,  /* %SOF_TIMESTAMPING_RX_SOFTWARE */
+	SOCK_TIMESTAMPING_SOFTWARE,     /* %SOF_TIMESTAMPING_SOFTWARE */
+	SOCK_TIMESTAMPING_RAW_HARDWARE, /* %SOF_TIMESTAMPING_RAW_HARDWARE */
+	SOCK_TIMESTAMPING_SYS_HARDWARE, /* %SOF_TIMESTAMPING_SYS_HARDWARE */
+	SOCK_FASYNC, /* fasync() active */
+	SOCK_RXQ_OVFL,
+	SOCK_ZEROCOPY, /* buffers from userspace */
+	SOCK_WIFI_STATUS, /* push wifi status to userspace */
+	SOCK_NOFCS, /* Tell NIC not to do the Ethernet FCS.
+		     * Will use last 4 bytes of packet sent from
+		     * user-space instead.
+		     */
+};
+
+static inline void sock_copy_flags(struct sock *nsk, struct sock *osk)
+{
+	nsk->sk_flags = osk->sk_flags;
+}
+
+static inline void sock_set_flag(struct sock *sk, enum sock_flags flag)
+{
+	__set_bit(flag, &sk->sk_flags);
+}
+
+static inline void sock_reset_flag(struct sock *sk, enum sock_flags flag)
+{
+	__clear_bit(flag, &sk->sk_flags);
+}
+
+static inline int sock_flag(struct sock *sk, enum sock_flags flag)
+{
+	return test_bit(flag, &sk->sk_flags);
+}
+
+static inline void sk_acceptq_removed(struct sock *sk)
+{
+	sk->sk_ack_backlog--;
+}
+
+static inline void sk_acceptq_added(struct sock *sk)
+{
+	sk->sk_ack_backlog++;
+}
+
+static inline int sk_acceptq_is_full(struct sock *sk)
+{
+	return sk->sk_ack_backlog > sk->sk_max_ack_backlog;
+}
+
+/*
+ * Compute minimal free write space needed to queue new packets.
+ */
+static inline int sk_stream_min_wspace(struct sock *sk)
+{
+	return sk->sk_wmem_queued >> 1;
+}
+
+static inline int sk_stream_wspace(struct sock *sk)
+{
+	return sk->sk_sndbuf - sk->sk_wmem_queued;
+}
+
+extern void sk_stream_write_space(struct sock *sk);
+
+static inline int sk_stream_memory_free(struct sock *sk)
+{
+	return sk->sk_wmem_queued < sk->sk_sndbuf;
+}
+
+/* OOB backlog add */
+static inline void __sk_add_backlog(struct sock *sk, struct sk_buff *skb)
+{
+	/* dont let skb dst not refcounted, we are going to leave rcu lock */
+	skb_dst_force(skb);
+
+	if (!sk->sk_backlog.tail)
+		sk->sk_backlog.head = skb;
+	else
+		sk->sk_backlog.tail->next = skb;
+
+	sk->sk_backlog.tail = skb;
+	skb->next = NULL;
+}
+
+/*
+ * Take into account size of receive queue and backlog queue
+ * Do not take into account this skb truesize,
+ * to allow even a single big packet to come.
+ */
+static inline bool sk_rcvqueues_full(const struct sock *sk, const struct sk_buff *skb)
+{
+	unsigned int qsize = sk->sk_backlog.len + atomic_read(&sk->sk_rmem_alloc);
+
+	return qsize > sk->sk_rcvbuf;
+}
+
+/* The per-socket spinlock must be held here. */
+static inline __must_check int sk_add_backlog(struct sock *sk, struct sk_buff *skb)
+{
+	if (sk_rcvqueues_full(sk, skb))
+		return -ENOBUFS;
+
+	__sk_add_backlog(sk, skb);
+	sk->sk_backlog.len += skb->truesize;
+	return 0;
+}
+
+static inline int sk_backlog_rcv(struct sock *sk, struct sk_buff *skb)
+{
+	return sk->sk_backlog_rcv(sk, skb);
+}
+
+static inline void sock_rps_record_flow(const struct sock *sk)
+{
+#ifdef CONFIG_RPS
+	struct rps_sock_flow_table *sock_flow_table;
+
+	rcu_read_lock();
+	sock_flow_table = rcu_dereference(rps_sock_flow_table);
+	rps_record_sock_flow(sock_flow_table, sk->sk_rxhash);
+	rcu_read_unlock();
+#endif
+}
+
+static inline void sock_rps_reset_flow(const struct sock *sk)
+{
+#ifdef CONFIG_RPS
+	struct rps_sock_flow_table *sock_flow_table;
+
+	rcu_read_lock();
+	sock_flow_table = rcu_dereference(rps_sock_flow_table);
+	rps_reset_sock_flow(sock_flow_table, sk->sk_rxhash);
+	rcu_read_unlock();
+#endif
+}
+
+static inline void sock_rps_save_rxhash(struct sock *sk,
+					const struct sk_buff *skb)
+{
+#ifdef CONFIG_RPS
+	if (unlikely(sk->sk_rxhash != skb->rxhash)) {
+		sock_rps_reset_flow(sk);
+		sk->sk_rxhash = skb->rxhash;
+	}
+#endif
+}
+
+static inline void sock_rps_reset_rxhash(struct sock *sk)
+{
+#ifdef CONFIG_RPS
+	sock_rps_reset_flow(sk);
+	sk->sk_rxhash = 0;
+#endif
+}
+
+#define sk_wait_event(__sk, __timeo, __condition)			\
+	({	int __rc;						\
+		release_sock(__sk);					\
+		__rc = __condition;					\
+		if (!__rc) {						\
+			*(__timeo) = schedule_timeout(*(__timeo));	\
+		}							\
+		lock_sock(__sk);					\
+		__rc = __condition;					\
+		__rc;							\
+	})
+
+extern int sk_stream_wait_connect(struct sock *sk, long *timeo_p);
+extern int sk_stream_wait_memory(struct sock *sk, long *timeo_p);
+extern void sk_stream_wait_close(struct sock *sk, long timeo_p);
+extern int sk_stream_error(struct sock *sk, int flags, int err);
+extern void sk_stream_kill_queues(struct sock *sk);
+
+extern int sk_wait_data(struct sock *sk, long *timeo);
+
+struct request_sock_ops;
+struct timewait_sock_ops;
+struct inet_hashinfo;
+struct raw_hashinfo;
+struct module;
+
+/* Networking protocol blocks we attach to sockets.
+ * socket layer -> transport layer interface
+ * transport -> network interface is defined by struct inet_proto
+ */
+struct proto {
+	void			(*close)(struct sock *sk, 
+					long timeout);
+	int			(*connect)(struct sock *sk,
+				        struct sockaddr *uaddr, 
+					int addr_len);
+	int			(*disconnect)(struct sock *sk, int flags);
+
+	struct sock *		(*accept) (struct sock *sk, int flags, int *err);
+
+	int			(*ioctl)(struct sock *sk, int cmd,
+					 unsigned long arg);
+	int			(*init)(struct sock *sk);
+	void			(*destroy)(struct sock *sk);
+	void			(*shutdown)(struct sock *sk, int how);
+	int			(*setsockopt)(struct sock *sk, int level, 
+					int optname, char __user *optval,
+					unsigned int optlen);
+	int			(*getsockopt)(struct sock *sk, int level, 
+					int optname, char __user *optval, 
+					int __user *option);  	 
+#ifdef CONFIG_COMPAT
+	int			(*compat_setsockopt)(struct sock *sk,
+					int level,
+					int optname, char __user *optval,
+					unsigned int optlen);
+	int			(*compat_getsockopt)(struct sock *sk,
+					int level,
+					int optname, char __user *optval,
+					int __user *option);
+	int			(*compat_ioctl)(struct sock *sk,
+					unsigned int cmd, unsigned long arg);
+#endif
+	int			(*sendmsg)(struct kiocb *iocb, struct sock *sk,
+					   struct msghdr *msg, size_t len);
+	int			(*recvmsg)(struct kiocb *iocb, struct sock *sk,
+					   struct msghdr *msg,
+					size_t len, int noblock, int flags, 
+					int *addr_len);
+	int			(*sendpage)(struct sock *sk, struct page *page,
+					int offset, size_t size, int flags);
+	int			(*bind)(struct sock *sk, 
+					struct sockaddr *uaddr, int addr_len);
+
+	int			(*backlog_rcv) (struct sock *sk, 
+						struct sk_buff *skb);
+
+	/* Keeping track of sk's, looking them up, and port selection methods. */
+	void			(*hash)(struct sock *sk);
+	void			(*unhash)(struct sock *sk);
+	void			(*rehash)(struct sock *sk);
+	int			(*get_port)(struct sock *sk, unsigned short snum);
+	void			(*clear_sk)(struct sock *sk, int size);
+
+	/* Keeping track of sockets in use */
+#ifdef CONFIG_PROC_FS
+	unsigned int		inuse_idx;
+#endif
+
+	/* Memory pressure */
+	void			(*enter_memory_pressure)(struct sock *sk);
+	atomic_long_t		*memory_allocated;	/* Current allocated memory. */
+	struct percpu_counter	*sockets_allocated;	/* Current number of sockets. */
+	/*
+	 * Pressure flag: try to collapse.
+	 * Technical note: it is used by multiple contexts non atomically.
+	 * All the __sk_mem_schedule() is of this nature: accounting
+	 * is strict, actions are advisory and have some latency.
+	 */
+	int			*memory_pressure;
+	long			*sysctl_mem;
+	int			*sysctl_wmem;
+	int			*sysctl_rmem;
+	int			max_header;
+	bool			no_autobind;
+
+	struct kmem_cache	*slab;
+	unsigned int		obj_size;
+	int			slab_flags;
+
+	struct percpu_counter	*orphan_count;
+
+	struct request_sock_ops	*rsk_prot;
+	struct timewait_sock_ops *twsk_prot;
+
+	union {
+		struct inet_hashinfo	*hashinfo;
+		struct udp_table	*udp_table;
+		struct raw_hashinfo	*raw_hash;
+	} h;
+
+	struct module		*owner;
+
+	char			name[32];
+
+	struct list_head	node;
+#ifdef SOCK_REFCNT_DEBUG
+	atomic_t		socks;
+#endif
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR_KMEM
+	/*
+	 * cgroup specific init/deinit functions. Called once for all
+	 * protocols that implement it, from cgroups populate function.
+	 * This function has to setup any files the protocol want to
+	 * appear in the kmem cgroup filesystem.
+	 */
+	int			(*init_cgroup)(struct cgroup *cgrp,
+					       struct cgroup_subsys *ss);
+	void			(*destroy_cgroup)(struct cgroup *cgrp);
+	struct cg_proto		*(*proto_cgroup)(struct mem_cgroup *memcg);
+#endif
+};
+
+struct cg_proto {
+	void			(*enter_memory_pressure)(struct sock *sk);
+	struct res_counter	*memory_allocated;	/* Current allocated memory. */
+	struct percpu_counter	*sockets_allocated;	/* Current number of sockets. */
+	int			*memory_pressure;
+	long			*sysctl_mem;
+	/*
+	 * memcg field is used to find which memcg we belong directly
+	 * Each memcg struct can hold more than one cg_proto, so container_of
+	 * won't really cut.
+	 *
+	 * The elegant solution would be having an inverse function to
+	 * proto_cgroup in struct proto, but that means polluting the structure
+	 * for everybody, instead of just for memcg users.
+	 */
+	struct mem_cgroup	*memcg;
+};
+
+extern int proto_register(struct proto *prot, int alloc_slab);
+extern void proto_unregister(struct proto *prot);
+
+#ifdef SOCK_REFCNT_DEBUG
+static inline void sk_refcnt_debug_inc(struct sock *sk)
+{
+	atomic_inc(&sk->sk_prot->socks);
+}
+
+static inline void sk_refcnt_debug_dec(struct sock *sk)
+{
+	atomic_dec(&sk->sk_prot->socks);
+	printk(KERN_DEBUG "%s socket %p released, %d are still alive\n",
+	       sk->sk_prot->name, sk, atomic_read(&sk->sk_prot->socks));
+}
+
+inline void sk_refcnt_debug_release(const struct sock *sk)
+{
+	if (atomic_read(&sk->sk_refcnt) != 1)
+		printk(KERN_DEBUG "Destruction of the %s socket %p delayed, refcnt=%d\n",
+		       sk->sk_prot->name, sk, atomic_read(&sk->sk_refcnt));
+}
+#else /* SOCK_REFCNT_DEBUG */
+#define sk_refcnt_debug_inc(sk) do { } while (0)
+#define sk_refcnt_debug_dec(sk) do { } while (0)
+#define sk_refcnt_debug_release(sk) do { } while (0)
+#endif /* SOCK_REFCNT_DEBUG */
+
+#if defined(CONFIG_CGROUP_MEM_RES_CTLR_KMEM) && defined(CONFIG_NET)
+extern struct static_key memcg_socket_limit_enabled;
+static inline struct cg_proto *parent_cg_proto(struct proto *proto,
+					       struct cg_proto *cg_proto)
+{
+	return proto->proto_cgroup(parent_mem_cgroup(cg_proto->memcg));
+}
+#define mem_cgroup_sockets_enabled static_key_false(&memcg_socket_limit_enabled)
+#else
+#define mem_cgroup_sockets_enabled 0
+static inline struct cg_proto *parent_cg_proto(struct proto *proto,
+					       struct cg_proto *cg_proto)
+{
+	return NULL;
+}
+#endif
+
+
+static inline bool sk_has_memory_pressure(const struct sock *sk)
+{
+	return sk->sk_prot->memory_pressure != NULL;
+}
+
+static inline bool sk_under_memory_pressure(const struct sock *sk)
+{
+	if (!sk->sk_prot->memory_pressure)
+		return false;
+
+	if (mem_cgroup_sockets_enabled && sk->sk_cgrp)
+		return !!*sk->sk_cgrp->memory_pressure;
+
+	return !!*sk->sk_prot->memory_pressure;
+}
+
+static inline void sk_leave_memory_pressure(struct sock *sk)
+{
+	int *memory_pressure = sk->sk_prot->memory_pressure;
+
+	if (!memory_pressure)
+		return;
+
+	if (*memory_pressure)
+		*memory_pressure = 0;
+
+	if (mem_cgroup_sockets_enabled && sk->sk_cgrp) {
+		struct cg_proto *cg_proto = sk->sk_cgrp;
+		struct proto *prot = sk->sk_prot;
+
+		for (; cg_proto; cg_proto = parent_cg_proto(prot, cg_proto))
+			if (*cg_proto->memory_pressure)
+				*cg_proto->memory_pressure = 0;
+	}
+
+}
+
+static inline void sk_enter_memory_pressure(struct sock *sk)
+{
+	if (!sk->sk_prot->enter_memory_pressure)
+		return;
+
+	if (mem_cgroup_sockets_enabled && sk->sk_cgrp) {
+		struct cg_proto *cg_proto = sk->sk_cgrp;
+		struct proto *prot = sk->sk_prot;
+
+		for (; cg_proto; cg_proto = parent_cg_proto(prot, cg_proto))
+			cg_proto->enter_memory_pressure(sk);
+	}
+
+	sk->sk_prot->enter_memory_pressure(sk);
+}
+
+static inline long sk_prot_mem_limits(const struct sock *sk, int index)
+{
+	long *prot = sk->sk_prot->sysctl_mem;
+	if (mem_cgroup_sockets_enabled && sk->sk_cgrp)
+		prot = sk->sk_cgrp->sysctl_mem;
+	return prot[index];
+}
+
+static inline void memcg_memory_allocated_add(struct cg_proto *prot,
+					      unsigned long amt,
+					      int *parent_status)
+{
+	struct res_counter *fail;
+	int ret;
+
+	ret = res_counter_charge_nofail(prot->memory_allocated,
+					amt << PAGE_SHIFT, &fail);
+	if (ret < 0)
+		*parent_status = OVER_LIMIT;
+}
+
+static inline void memcg_memory_allocated_sub(struct cg_proto *prot,
+					      unsigned long amt)
+{
+	res_counter_uncharge(prot->memory_allocated, amt << PAGE_SHIFT);
+}
+
+static inline u64 memcg_memory_allocated_read(struct cg_proto *prot)
+{
+	u64 ret;
+	ret = res_counter_read_u64(prot->memory_allocated, RES_USAGE);
+	return ret >> PAGE_SHIFT;
+}
+
+static inline long
+sk_memory_allocated(const struct sock *sk)
+{
+	struct proto *prot = sk->sk_prot;
+	if (mem_cgroup_sockets_enabled && sk->sk_cgrp)
+		return memcg_memory_allocated_read(sk->sk_cgrp);
+
+	return atomic_long_read(prot->memory_allocated);
+}
+
+static inline long
+sk_memory_allocated_add(struct sock *sk, int amt, int *parent_status)
+{
+	struct proto *prot = sk->sk_prot;
+
+	if (mem_cgroup_sockets_enabled && sk->sk_cgrp) {
+		memcg_memory_allocated_add(sk->sk_cgrp, amt, parent_status);
+		/* update the root cgroup regardless */
+		atomic_long_add_return(amt, prot->memory_allocated);
+		return memcg_memory_allocated_read(sk->sk_cgrp);
+	}
+
+	return atomic_long_add_return(amt, prot->memory_allocated);
+}
+
+static inline void
+sk_memory_allocated_sub(struct sock *sk, int amt)
+{
+	struct proto *prot = sk->sk_prot;
+
+	if (mem_cgroup_sockets_enabled && sk->sk_cgrp)
+		memcg_memory_allocated_sub(sk->sk_cgrp, amt);
+
+	atomic_long_sub(amt, prot->memory_allocated);
+}
+
+static inline void sk_sockets_allocated_dec(struct sock *sk)
+{
+	struct proto *prot = sk->sk_prot;
+
+	if (mem_cgroup_sockets_enabled && sk->sk_cgrp) {
+		struct cg_proto *cg_proto = sk->sk_cgrp;
+
+		for (; cg_proto; cg_proto = parent_cg_proto(prot, cg_proto))
+			percpu_counter_dec(cg_proto->sockets_allocated);
+	}
+
+	percpu_counter_dec(prot->sockets_allocated);
+}
+
+static inline void sk_sockets_allocated_inc(struct sock *sk)
+{
+	struct proto *prot = sk->sk_prot;
+
+	if (mem_cgroup_sockets_enabled && sk->sk_cgrp) {
+		struct cg_proto *cg_proto = sk->sk_cgrp;
+
+		for (; cg_proto; cg_proto = parent_cg_proto(prot, cg_proto))
+			percpu_counter_inc(cg_proto->sockets_allocated);
+	}
+
+	percpu_counter_inc(prot->sockets_allocated);
+}
+
+static inline int
+sk_sockets_allocated_read_positive(struct sock *sk)
+{
+	struct proto *prot = sk->sk_prot;
+
+	if (mem_cgroup_sockets_enabled && sk->sk_cgrp)
+		return percpu_counter_read_positive(sk->sk_cgrp->sockets_allocated);
+
+	return percpu_counter_read_positive(prot->sockets_allocated);
+}
+
+static inline int
+proto_sockets_allocated_sum_positive(struct proto *prot)
+{
+	return percpu_counter_sum_positive(prot->sockets_allocated);
+}
+
+static inline long
+proto_memory_allocated(struct proto *prot)
+{
+	return atomic_long_read(prot->memory_allocated);
+}
+
+static inline bool
+proto_memory_pressure(struct proto *prot)
+{
+	if (!prot->memory_pressure)
+		return false;
+	return !!*prot->memory_pressure;
+}
+
+
+#ifdef CONFIG_PROC_FS
+/* Called with local bh disabled */
+extern void sock_prot_inuse_add(struct net *net, struct proto *prot, int inc);
+extern int sock_prot_inuse_get(struct net *net, struct proto *proto);
+#else
+static void inline sock_prot_inuse_add(struct net *net, struct proto *prot,
+		int inc)
+{
+}
+#endif
+
+
+/* With per-bucket locks this operation is not-atomic, so that
+ * this version is not worse.
+ */
+static inline void __sk_prot_rehash(struct sock *sk)
+{
+	sk->sk_prot->unhash(sk);
+	sk->sk_prot->hash(sk);
+}
+
+void sk_prot_clear_portaddr_nulls(struct sock *sk, int size);
+
+/* About 10 seconds */
+#define SOCK_DESTROY_TIME (10*HZ)
+
+/* Sockets 0-1023 can't be bound to unless you are superuser */
+#define PROT_SOCK	1024
+
+#define SHUTDOWN_MASK	3
+#define RCV_SHUTDOWN	1
+#define SEND_SHUTDOWN	2
+
+#define SOCK_SNDBUF_LOCK	1
+#define SOCK_RCVBUF_LOCK	2
+#define SOCK_BINDADDR_LOCK	4
+#define SOCK_BINDPORT_LOCK	8
+
+/* sock_iocb: used to kick off async processing of socket ios */
+struct sock_iocb {
+	struct list_head	list;
+
+	int			flags;
+	int			size;
+	struct socket		*sock;
+	struct sock		*sk;
+	struct scm_cookie	*scm;
+	struct msghdr		*msg, async_msg;
+	struct kiocb		*kiocb;
+};
+
+static inline struct sock_iocb *kiocb_to_siocb(struct kiocb *iocb)
+{
+	return (struct sock_iocb *)iocb->private;
+}
+
+static inline struct kiocb *siocb_to_kiocb(struct sock_iocb *si)
+{
+	return si->kiocb;
+}
+
+struct socket_alloc {
+	struct socket socket;
+	struct inode vfs_inode;
+};
+
+static inline struct socket *SOCKET_I(struct inode *inode)
+{
+	return &container_of(inode, struct socket_alloc, vfs_inode)->socket;
+}
+
+static inline struct inode *SOCK_INODE(struct socket *socket)
+{
+	return &container_of(socket, struct socket_alloc, socket)->vfs_inode;
+}
+
+/*
+ * Functions for memory accounting
+ */
+extern int __sk_mem_schedule(struct sock *sk, int size, int kind);
+extern void __sk_mem_reclaim(struct sock *sk);
+
+#define SK_MEM_QUANTUM ((int)PAGE_SIZE)
+#define SK_MEM_QUANTUM_SHIFT ilog2(SK_MEM_QUANTUM)
+#define SK_MEM_SEND	0
+#define SK_MEM_RECV	1
+
+static inline int sk_mem_pages(int amt)
+{
+	return (amt + SK_MEM_QUANTUM - 1) >> SK_MEM_QUANTUM_SHIFT;
+}
+
+static inline int sk_has_account(struct sock *sk)
+{
+	/* return true if protocol supports memory accounting */
+	return !!sk->sk_prot->memory_allocated;
+}
+
+static inline int sk_wmem_schedule(struct sock *sk, int size)
+{
+	if (!sk_has_account(sk))
+		return 1;
+	return size <= sk->sk_forward_alloc ||
+		__sk_mem_schedule(sk, size, SK_MEM_SEND);
+}
+
+static inline int sk_rmem_schedule(struct sock *sk, int size)
+{
+	if (!sk_has_account(sk))
+		return 1;
+	return size <= sk->sk_forward_alloc ||
+		__sk_mem_schedule(sk, size, SK_MEM_RECV);
+}
+
+static inline void sk_mem_reclaim(struct sock *sk)
+{
+	if (!sk_has_account(sk))
+		return;
+	if (sk->sk_forward_alloc >= SK_MEM_QUANTUM)
+		__sk_mem_reclaim(sk);
+}
+
+static inline void sk_mem_reclaim_partial(struct sock *sk)
+{
+	if (!sk_has_account(sk))
+		return;
+	if (sk->sk_forward_alloc > SK_MEM_QUANTUM)
+		__sk_mem_reclaim(sk);
+}
+
+static inline void sk_mem_charge(struct sock *sk, int size)
+{
+	if (!sk_has_account(sk))
+		return;
+	sk->sk_forward_alloc -= size;
+}
+
+static inline void sk_mem_uncharge(struct sock *sk, int size)
+{
+	if (!sk_has_account(sk))
+		return;
+	sk->sk_forward_alloc += size;
+}
+
+static inline void sk_wmem_free_skb(struct sock *sk, struct sk_buff *skb)
+{
+	sock_set_flag(sk, SOCK_QUEUE_SHRUNK);
+	sk->sk_wmem_queued -= skb->truesize;
+	sk_mem_uncharge(sk, skb->truesize);
+	__kfree_skb(skb);
+}
+
+/* Used by processes to "lock" a socket state, so that
+ * interrupts and bottom half handlers won't change it
+ * from under us. It essentially blocks any incoming
+ * packets, so that we won't get any new data or any
+ * packets that change the state of the socket.
+ *
+ * While locked, BH processing will add new packets to
+ * the backlog queue.  This queue is processed by the
+ * owner of the socket lock right before it is released.
+ *
+ * Since ~2.3.5 it is also exclusive sleep lock serializing
+ * accesses from user process context.
+ */
+#define sock_owned_by_user(sk)	((sk)->sk_lock.owned)
+
+/*
+ * Macro so as to not evaluate some arguments when
+ * lockdep is not enabled.
+ *
+ * Mark both the sk_lock and the sk_lock.slock as a
+ * per-address-family lock class.
+ */
+#define sock_lock_init_class_and_name(sk, sname, skey, name, key) 	\
+do {									\
+	sk->sk_lock.owned = 0;						\
+	init_waitqueue_head(&sk->sk_lock.wq);				\
+	spin_lock_init(&(sk)->sk_lock.slock);				\
+	debug_check_no_locks_freed((void *)&(sk)->sk_lock,		\
+			sizeof((sk)->sk_lock));				\
+	lockdep_set_class_and_name(&(sk)->sk_lock.slock,		\
+		       	(skey), (sname));				\
+	lockdep_init_map(&(sk)->sk_lock.dep_map, (name), (key), 0);	\
+} while (0)
+
+extern void lock_sock_nested(struct sock *sk, int subclass);
+
+static inline void lock_sock(struct sock *sk)
+{
+	lock_sock_nested(sk, 0);
+}
+
+extern void release_sock(struct sock *sk);
+
+/* BH context may only use the following locking interface. */
+#define bh_lock_sock(__sk)	spin_lock(&((__sk)->sk_lock.slock))
+#define bh_lock_sock_nested(__sk) \
+				spin_lock_nested(&((__sk)->sk_lock.slock), \
+				SINGLE_DEPTH_NESTING)
+#define bh_unlock_sock(__sk)	spin_unlock(&((__sk)->sk_lock.slock))
+
+extern bool lock_sock_fast(struct sock *sk);
+/**
+ * unlock_sock_fast - complement of lock_sock_fast
+ * @sk: socket
+ * @slow: slow mode
+ *
+ * fast unlock socket for user context.
+ * If slow mode is on, we call regular release_sock()
+ */
+static inline void unlock_sock_fast(struct sock *sk, bool slow)
+{
+	if (slow)
+		release_sock(sk);
+	else
+		spin_unlock_bh(&sk->sk_lock.slock);
+}
+
+
+extern struct sock		*sk_alloc(struct net *net, int family,
+					  gfp_t priority,
+					  struct proto *prot);
+extern void			sk_free(struct sock *sk);
+extern void			sk_release_kernel(struct sock *sk);
+extern struct sock		*sk_clone_lock(const struct sock *sk,
+					       const gfp_t priority);
+
+extern struct sk_buff		*sock_wmalloc(struct sock *sk,
+					      unsigned long size, int force,
+					      gfp_t priority);
+extern struct sk_buff		*sock_rmalloc(struct sock *sk,
+					      unsigned long size, int force,
+					      gfp_t priority);
+extern void			sock_wfree(struct sk_buff *skb);
+extern void			sock_rfree(struct sk_buff *skb);
+
+extern int			sock_setsockopt(struct socket *sock, int level,
+						int op, char __user *optval,
+						unsigned int optlen);
+
+extern int			sock_getsockopt(struct socket *sock, int level,
+						int op, char __user *optval, 
+						int __user *optlen);
+extern struct sk_buff 		*sock_alloc_send_skb(struct sock *sk,
+						     unsigned long size,
+						     int noblock,
+						     int *errcode);
+extern struct sk_buff 		*sock_alloc_send_pskb(struct sock *sk,
+						      unsigned long header_len,
+						      unsigned long data_len,
+						      int noblock,
+						      int *errcode);
+extern void *sock_kmalloc(struct sock *sk, int size,
+			  gfp_t priority);
+extern void sock_kfree_s(struct sock *sk, void *mem, int size);
+extern void sk_send_sigurg(struct sock *sk);
+
+#ifdef CONFIG_CGROUPS
+extern void sock_update_classid(struct sock *sk);
+#else
+static inline void sock_update_classid(struct sock *sk)
+{
+}
+#endif
+
+/*
+ * Functions to fill in entries in struct proto_ops when a protocol
+ * does not implement a particular function.
+ */
+extern int                      sock_no_bind(struct socket *, 
+					     struct sockaddr *, int);
+extern int                      sock_no_connect(struct socket *,
+						struct sockaddr *, int, int);
+extern int                      sock_no_socketpair(struct socket *,
+						   struct socket *);
+extern int                      sock_no_accept(struct socket *,
+					       struct socket *, int);
+extern int                      sock_no_getname(struct socket *,
+						struct sockaddr *, int *, int);
+extern unsigned int             sock_no_poll(struct file *, struct socket *,
+					     struct poll_table_struct *);
+extern int                      sock_no_ioctl(struct socket *, unsigned int,
+					      unsigned long);
+extern int			sock_no_listen(struct socket *, int);
+extern int                      sock_no_shutdown(struct socket *, int);
+extern int			sock_no_getsockopt(struct socket *, int , int,
+						   char __user *, int __user *);
+extern int			sock_no_setsockopt(struct socket *, int, int,
+						   char __user *, unsigned int);
+extern int                      sock_no_sendmsg(struct kiocb *, struct socket *,
+						struct msghdr *, size_t);
+extern int                      sock_no_recvmsg(struct kiocb *, struct socket *,
+						struct msghdr *, size_t, int);
+extern int			sock_no_mmap(struct file *file,
+					     struct socket *sock,
+					     struct vm_area_struct *vma);
+extern ssize_t			sock_no_sendpage(struct socket *sock,
+						struct page *page,
+						int offset, size_t size, 
+						int flags);
+
+/*
+ * Functions to fill in entries in struct proto_ops when a protocol
+ * uses the inet style.
+ */
+extern int sock_common_getsockopt(struct socket *sock, int level, int optname,
+				  char __user *optval, int __user *optlen);
+extern int sock_common_recvmsg(struct kiocb *iocb, struct socket *sock,
+			       struct msghdr *msg, size_t size, int flags);
+extern int sock_common_setsockopt(struct socket *sock, int level, int optname,
+				  char __user *optval, unsigned int optlen);
+extern int compat_sock_common_getsockopt(struct socket *sock, int level,
+		int optname, char __user *optval, int __user *optlen);
+extern int compat_sock_common_setsockopt(struct socket *sock, int level,
+		int optname, char __user *optval, unsigned int optlen);
+
+extern void sk_common_release(struct sock *sk);
+
+/*
+ *	Default socket callbacks and setup code
+ */
+ 
+/* Initialise core socket variables */
+extern void sock_init_data(struct socket *sock, struct sock *sk);
+
+extern void sk_filter_release_rcu(struct rcu_head *rcu);
+
+/**
+ *	sk_filter_release - release a socket filter
+ *	@fp: filter to remove
+ *
+ *	Remove a filter from a socket and release its resources.
+ */
+
+static inline void sk_filter_release(struct sk_filter *fp)
+{
+	if (atomic_dec_and_test(&fp->refcnt))
+		call_rcu(&fp->rcu, sk_filter_release_rcu);
+}
+
+static inline void sk_filter_uncharge(struct sock *sk, struct sk_filter *fp)
+{
+	unsigned int size = sk_filter_len(fp);
+
+	atomic_sub(size, &sk->sk_omem_alloc);
+	sk_filter_release(fp);
+}
+
+static inline void sk_filter_charge(struct sock *sk, struct sk_filter *fp)
+{
+	atomic_inc(&fp->refcnt);
+	atomic_add(sk_filter_len(fp), &sk->sk_omem_alloc);
+}
+
+/*
+ * Socket reference counting postulates.
+ *
+ * * Each user of socket SHOULD hold a reference count.
+ * * Each access point to socket (an hash table bucket, reference from a list,
+ *   running timer, skb in flight MUST hold a reference count.
+ * * When reference count hits 0, it means it will never increase back.
+ * * When reference count hits 0, it means that no references from
+ *   outside exist to this socket and current process on current CPU
+ *   is last user and may/should destroy this socket.
+ * * sk_free is called from any context: process, BH, IRQ. When
+ *   it is called, socket has no references from outside -> sk_free
+ *   may release descendant resources allocated by the socket, but
+ *   to the time when it is called, socket is NOT referenced by any
+ *   hash tables, lists etc.
+ * * Packets, delivered from outside (from network or from another process)
+ *   and enqueued on receive/error queues SHOULD NOT grab reference count,
+ *   when they sit in queue. Otherwise, packets will leak to hole, when
+ *   socket is looked up by one cpu and unhasing is made by another CPU.
+ *   It is true for udp/raw, netlink (leak to receive and error queues), tcp
+ *   (leak to backlog). Packet socket does all the processing inside
+ *   BR_NETPROTO_LOCK, so that it has not this race condition. UNIX sockets
+ *   use separate SMP lock, so that they are prone too.
+ */
+
+/* Ungrab socket and destroy it, if it was the last reference. */
+static inline void sock_put(struct sock *sk)
+{
+	if (atomic_dec_and_test(&sk->sk_refcnt))
+		sk_free(sk);
+}
+
+extern int sk_receive_skb(struct sock *sk, struct sk_buff *skb,
+			  const int nested);
+
+static inline void sk_tx_queue_set(struct sock *sk, int tx_queue)
+{
+	sk->sk_tx_queue_mapping = tx_queue;
+}
+
+static inline void sk_tx_queue_clear(struct sock *sk)
+{
+	sk->sk_tx_queue_mapping = -1;
+}
+
+static inline int sk_tx_queue_get(const struct sock *sk)
+{
+	return sk ? sk->sk_tx_queue_mapping : -1;
+}
+
+static inline void sk_set_socket(struct sock *sk, struct socket *sock)
+{
+	sk_tx_queue_clear(sk);
+	sk->sk_socket = sock;
+}
+
+static inline wait_queue_head_t *sk_sleep(struct sock *sk)
+{
+	BUILD_BUG_ON(offsetof(struct socket_wq, wait) != 0);
+	return &rcu_dereference_raw(sk->sk_wq)->wait;
+}
+/* Detach socket from process context.
+ * Announce socket dead, detach it from wait queue and inode.
+ * Note that parent inode held reference count on this struct sock,
+ * we do not release it in this function, because protocol
+ * probably wants some additional cleanups or even continuing
+ * to work with this socket (TCP).
+ */
+static inline void sock_orphan(struct sock *sk)
+{
+	write_lock_bh(&sk->sk_callback_lock);
+	sock_set_flag(sk, SOCK_DEAD);
+	sk_set_socket(sk, NULL);
+	sk->sk_wq  = NULL;
+	write_unlock_bh(&sk->sk_callback_lock);
+}
+
+static inline void sock_graft(struct sock *sk, struct socket *parent)
+{
+	write_lock_bh(&sk->sk_callback_lock);
+	sk->sk_wq = parent->wq;
+	parent->sk = sk;
+	sk_set_socket(sk, parent);
+	security_sock_graft(sk, parent);
+	write_unlock_bh(&sk->sk_callback_lock);
+}
+
+extern int sock_i_uid(struct sock *sk);
+extern unsigned long sock_i_ino(struct sock *sk);
+
+static inline struct dst_entry *
+__sk_dst_get(struct sock *sk)
+{
+	return rcu_dereference_check(sk->sk_dst_cache, sock_owned_by_user(sk) ||
+						       lockdep_is_held(&sk->sk_lock.slock));
+}
+
+static inline struct dst_entry *
+sk_dst_get(struct sock *sk)
+{
+	struct dst_entry *dst;
+
+	rcu_read_lock();
+	dst = rcu_dereference(sk->sk_dst_cache);
+	if (dst)
+		dst_hold(dst);
+	rcu_read_unlock();
+	return dst;
+}
+
+extern void sk_reset_txq(struct sock *sk);
+
+static inline void dst_negative_advice(struct sock *sk)
+{
+	struct dst_entry *ndst, *dst = __sk_dst_get(sk);
+
+	if (dst && dst->ops->negative_advice) {
+		ndst = dst->ops->negative_advice(dst);
+
+		if (ndst != dst) {
+			rcu_assign_pointer(sk->sk_dst_cache, ndst);
+			sk_reset_txq(sk);
+		}
+	}
+}
+
+static inline void
+__sk_dst_set(struct sock *sk, struct dst_entry *dst)
+{
+	struct dst_entry *old_dst;
+
+	sk_tx_queue_clear(sk);
+	/*
+	 * This can be called while sk is owned by the caller only,
+	 * with no state that can be checked in a rcu_dereference_check() cond
+	 */
+	old_dst = rcu_dereference_raw(sk->sk_dst_cache);
+	rcu_assign_pointer(sk->sk_dst_cache, dst);
+	dst_release(old_dst);
+}
+
+static inline void
+sk_dst_set(struct sock *sk, struct dst_entry *dst)
+{
+	spin_lock(&sk->sk_dst_lock);
+	__sk_dst_set(sk, dst);
+	spin_unlock(&sk->sk_dst_lock);
+}
+
+static inline void
+__sk_dst_reset(struct sock *sk)
+{
+	__sk_dst_set(sk, NULL);
+}
+
+static inline void
+sk_dst_reset(struct sock *sk)
+{
+	spin_lock(&sk->sk_dst_lock);
+	__sk_dst_reset(sk);
+	spin_unlock(&sk->sk_dst_lock);
+}
+
+extern struct dst_entry *__sk_dst_check(struct sock *sk, u32 cookie);
+
+extern struct dst_entry *sk_dst_check(struct sock *sk, u32 cookie);
+
+static inline int sk_can_gso(const struct sock *sk)
+{
+	return net_gso_ok(sk->sk_route_caps, sk->sk_gso_type);
+}
+
+extern void sk_setup_caps(struct sock *sk, struct dst_entry *dst);
+
+static inline void sk_nocaps_add(struct sock *sk, netdev_features_t flags)
+{
+	sk->sk_route_nocaps |= flags;
+	sk->sk_route_caps &= ~flags;
+}
+
+static inline int skb_do_copy_data_nocache(struct sock *sk, struct sk_buff *skb,
+					   char __user *from, char *to,
+					   int copy, int offset)
+{
+	if (skb->ip_summed == CHECKSUM_NONE) {
+		int err = 0;
+		__wsum csum = csum_and_copy_from_user(from, to, copy, 0, &err);
+		if (err)
+			return err;
+		skb->csum = csum_block_add(skb->csum, csum, offset);
+	} else if (sk->sk_route_caps & NETIF_F_NOCACHE_COPY) {
+		if (!access_ok(VERIFY_READ, from, copy) ||
+		    __copy_from_user_nocache(to, from, copy))
+			return -EFAULT;
+	} else if (copy_from_user(to, from, copy))
+		return -EFAULT;
+
+	return 0;
+}
+
+static inline int skb_add_data_nocache(struct sock *sk, struct sk_buff *skb,
+				       char __user *from, int copy)
+{
+	int err, offset = skb->len;
+
+	err = skb_do_copy_data_nocache(sk, skb, from, skb_put(skb, copy),
+				       copy, offset);
+	if (err)
+		__skb_trim(skb, offset);
+
+	return err;
+}
+
+static inline int skb_copy_to_page_nocache(struct sock *sk, char __user *from,
+					   struct sk_buff *skb,
+					   struct page *page,
+					   int off, int copy)
+{
+	int err;
+
+	err = skb_do_copy_data_nocache(sk, skb, from, page_address(page) + off,
+				       copy, skb->len);
+	if (err)
+		return err;
+
+	skb->len	     += copy;
+	skb->data_len	     += copy;
+	skb->truesize	     += copy;
+	sk->sk_wmem_queued   += copy;
+	sk_mem_charge(sk, copy);
+	return 0;
+}
+
+static inline int skb_copy_to_page(struct sock *sk, char __user *from,
+				   struct sk_buff *skb, struct page *page,
+				   int off, int copy)
+{
+	if (skb->ip_summed == CHECKSUM_NONE) {
+		int err = 0;
+		__wsum csum = csum_and_copy_from_user(from,
+						     page_address(page) + off,
+							    copy, 0, &err);
+		if (err)
+			return err;
+		skb->csum = csum_block_add(skb->csum, csum, skb->len);
+	} else if (copy_from_user(page_address(page) + off, from, copy))
+		return -EFAULT;
+
+	skb->len	     += copy;
+	skb->data_len	     += copy;
+	skb->truesize	     += copy;
+	sk->sk_wmem_queued   += copy;
+	sk_mem_charge(sk, copy);
+	return 0;
+}
+
+/**
+ * sk_wmem_alloc_get - returns write allocations
+ * @sk: socket
+ *
+ * Returns sk_wmem_alloc minus initial offset of one
+ */
+static inline int sk_wmem_alloc_get(const struct sock *sk)
+{
+	return atomic_read(&sk->sk_wmem_alloc) - 1;
+}
+
+/**
+ * sk_rmem_alloc_get - returns read allocations
+ * @sk: socket
+ *
+ * Returns sk_rmem_alloc
+ */
+static inline int sk_rmem_alloc_get(const struct sock *sk)
+{
+	return atomic_read(&sk->sk_rmem_alloc);
+}
+
+/**
+ * sk_has_allocations - check if allocations are outstanding
+ * @sk: socket
+ *
+ * Returns true if socket has write or read allocations
+ */
+static inline int sk_has_allocations(const struct sock *sk)
+{
+	return sk_wmem_alloc_get(sk) || sk_rmem_alloc_get(sk);
+}
+
+/**
+ * wq_has_sleeper - check if there are any waiting processes
+ * @wq: struct socket_wq
+ *
+ * Returns true if socket_wq has waiting processes
+ *
+ * The purpose of the wq_has_sleeper and sock_poll_wait is to wrap the memory
+ * barrier call. They were added due to the race found within the tcp code.
+ *
+ * Consider following tcp code paths:
+ *
+ * CPU1                  CPU2
+ *
+ * sys_select            receive packet
+ *   ...                 ...
+ *   __add_wait_queue    update tp->rcv_nxt
+ *   ...                 ...
+ *   tp->rcv_nxt check   sock_def_readable
+ *   ...                 {
+ *   schedule               rcu_read_lock();
+ *                          wq = rcu_dereference(sk->sk_wq);
+ *                          if (wq && waitqueue_active(&wq->wait))
+ *                              wake_up_interruptible(&wq->wait)
+ *                          ...
+ *                       }
+ *
+ * The race for tcp fires when the __add_wait_queue changes done by CPU1 stay
+ * in its cache, and so does the tp->rcv_nxt update on CPU2 side.  The CPU1
+ * could then endup calling schedule and sleep forever if there are no more
+ * data on the socket.
+ *
+ */
+static inline bool wq_has_sleeper(struct socket_wq *wq)
+{
+
+	/*
+	 * We need to be sure we are in sync with the
+	 * add_wait_queue modifications to the wait queue.
+	 *
+	 * This memory barrier is paired in the sock_poll_wait.
+	 */
+	smp_mb();
+	return wq && waitqueue_active(&wq->wait);
+}
+
+/**
+ * sock_poll_wait - place memory barrier behind the poll_wait call.
+ * @filp:           file
+ * @wait_address:   socket wait queue
+ * @p:              poll_table
+ *
+ * See the comments in the wq_has_sleeper function.
+ */
+static inline void sock_poll_wait(struct file *filp,
+		wait_queue_head_t *wait_address, poll_table *p)
+{
+	if (!poll_does_not_wait(p) && wait_address) {
+		poll_wait(filp, wait_address, p);
+		/*
+		 * We need to be sure we are in sync with the
+		 * socket flags modification.
+		 *
+		 * This memory barrier is paired in the wq_has_sleeper.
+		*/
+		smp_mb();
+	}
+}
+
+/*
+ * 	Queue a received datagram if it will fit. Stream and sequenced
+ *	protocols can't normally use this as they need to fit buffers in
+ *	and play with them.
+ *
+ * 	Inlined as it's very short and called for pretty much every
+ *	packet ever received.
+ */
+
+static inline void skb_set_owner_w(struct sk_buff *skb, struct sock *sk)
+{
+	skb_orphan(skb);
+	skb->sk = sk;
+	skb->destructor = sock_wfree;
+	/*
+	 * We used to take a refcount on sk, but following operation
+	 * is enough to guarantee sk_free() wont free this sock until
+	 * all in-flight packets are completed
+	 */
+	atomic_add(skb->truesize, &sk->sk_wmem_alloc);
+}
+
+static inline void skb_set_owner_r(struct sk_buff *skb, struct sock *sk)
+{
+	skb_orphan(skb);
+	skb->sk = sk;
+	skb->destructor = sock_rfree;
+	atomic_add(skb->truesize, &sk->sk_rmem_alloc);
+	sk_mem_charge(sk, skb->truesize);
+}
+
+extern void sk_reset_timer(struct sock *sk, struct timer_list* timer,
+			   unsigned long expires);
+
+extern void sk_stop_timer(struct sock *sk, struct timer_list* timer);
+
+extern int sock_queue_rcv_skb(struct sock *sk, struct sk_buff *skb);
+
+extern int sock_queue_err_skb(struct sock *sk, struct sk_buff *skb);
+
+/*
+ *	Recover an error report and clear atomically
+ */
+ 
+static inline int sock_error(struct sock *sk)
+{
+	int err;
+	if (likely(!sk->sk_err))
+		return 0;
+	err = xchg(&sk->sk_err, 0);
+	return -err;
+}
+
+static inline unsigned long sock_wspace(struct sock *sk)
+{
+	int amt = 0;
+
+	if (!(sk->sk_shutdown & SEND_SHUTDOWN)) {
+		amt = sk->sk_sndbuf - atomic_read(&sk->sk_wmem_alloc);
+		if (amt < 0) 
+			amt = 0;
+	}
+	return amt;
+}
+
+static inline void sk_wake_async(struct sock *sk, int how, int band)
+{
+	if (sock_flag(sk, SOCK_FASYNC))
+		sock_wake_async(sk->sk_socket, how, band);
+}
+
+#define SOCK_MIN_SNDBUF 2048
+/*
+ * Since sk_rmem_alloc sums skb->truesize, even a small frame might need
+ * sizeof(sk_buff) + MTU + padding, unless net driver perform copybreak
+ */
+#define SOCK_MIN_RCVBUF (2048 + sizeof(struct sk_buff))
+
+static inline void sk_stream_moderate_sndbuf(struct sock *sk)
+{
+	if (!(sk->sk_userlocks & SOCK_SNDBUF_LOCK)) {
+		sk->sk_sndbuf = min(sk->sk_sndbuf, sk->sk_wmem_queued >> 1);
+		sk->sk_sndbuf = max(sk->sk_sndbuf, SOCK_MIN_SNDBUF);
+	}
+}
+
+struct sk_buff *sk_stream_alloc_skb(struct sock *sk, int size, gfp_t gfp);
+
+static inline struct page *sk_stream_alloc_page(struct sock *sk)
+{
+	struct page *page = NULL;
+
+	page = alloc_pages(sk->sk_allocation, 0);
+	if (!page) {
+		sk_enter_memory_pressure(sk);
+		sk_stream_moderate_sndbuf(sk);
+	}
+	return page;
+}
+
+/*
+ *	Default write policy as shown to user space via poll/select/SIGIO
+ */
+static inline int sock_writeable(const struct sock *sk) 
+{
+	return atomic_read(&sk->sk_wmem_alloc) < (sk->sk_sndbuf >> 1);
+}
+
+static inline gfp_t gfp_any(void)
+{
+	return in_softirq() ? GFP_ATOMIC : GFP_KERNEL;
+}
+
+static inline long sock_rcvtimeo(const struct sock *sk, int noblock)
+{
+	return noblock ? 0 : sk->sk_rcvtimeo;
+}
+
+static inline long sock_sndtimeo(const struct sock *sk, int noblock)
+{
+	return noblock ? 0 : sk->sk_sndtimeo;
+}
+
+static inline int sock_rcvlowat(const struct sock *sk, int waitall, int len)
+{
+	return (waitall ? len : min_t(int, sk->sk_rcvlowat, len)) ? : 1;
+}
+
+/* Alas, with timeout socket operations are not restartable.
+ * Compare this to poll().
+ */
+static inline int sock_intr_errno(long timeo)
+{
+	return timeo == MAX_SCHEDULE_TIMEOUT ? -ERESTARTSYS : -EINTR;
+}
+
+extern void __sock_recv_timestamp(struct msghdr *msg, struct sock *sk,
+	struct sk_buff *skb);
+extern void __sock_recv_wifi_status(struct msghdr *msg, struct sock *sk,
+	struct sk_buff *skb);
+
+static __inline__ void
+sock_recv_timestamp(struct msghdr *msg, struct sock *sk, struct sk_buff *skb)
+{
+	ktime_t kt = skb->tstamp;
+	struct skb_shared_hwtstamps *hwtstamps = skb_hwtstamps(skb);
+
+	/*
+	 * generate control messages if
+	 * - receive time stamping in software requested (SOCK_RCVTSTAMP
+	 *   or SOCK_TIMESTAMPING_RX_SOFTWARE)
+	 * - software time stamp available and wanted
+	 *   (SOCK_TIMESTAMPING_SOFTWARE)
+	 * - hardware time stamps available and wanted
+	 *   (SOCK_TIMESTAMPING_SYS_HARDWARE or
+	 *   SOCK_TIMESTAMPING_RAW_HARDWARE)
+	 */
+	if (sock_flag(sk, SOCK_RCVTSTAMP) ||
+	    sock_flag(sk, SOCK_TIMESTAMPING_RX_SOFTWARE) ||
+	    (kt.tv64 && sock_flag(sk, SOCK_TIMESTAMPING_SOFTWARE)) ||
+	    (hwtstamps->hwtstamp.tv64 &&
+	     sock_flag(sk, SOCK_TIMESTAMPING_RAW_HARDWARE)) ||
+	    (hwtstamps->syststamp.tv64 &&
+	     sock_flag(sk, SOCK_TIMESTAMPING_SYS_HARDWARE)))
+		__sock_recv_timestamp(msg, sk, skb);
+	else
+		sk->sk_stamp = kt;
+
+	if (sock_flag(sk, SOCK_WIFI_STATUS) && skb->wifi_acked_valid)
+		__sock_recv_wifi_status(msg, sk, skb);
+}
+
+extern void __sock_recv_ts_and_drops(struct msghdr *msg, struct sock *sk,
+				     struct sk_buff *skb);
+
+static inline void sock_recv_ts_and_drops(struct msghdr *msg, struct sock *sk,
+					  struct sk_buff *skb)
+{
+#define FLAGS_TS_OR_DROPS ((1UL << SOCK_RXQ_OVFL)			| \
+			   (1UL << SOCK_RCVTSTAMP)			| \
+			   (1UL << SOCK_TIMESTAMPING_RX_SOFTWARE)	| \
+			   (1UL << SOCK_TIMESTAMPING_SOFTWARE)		| \
+			   (1UL << SOCK_TIMESTAMPING_RAW_HARDWARE) 	| \
+			   (1UL << SOCK_TIMESTAMPING_SYS_HARDWARE))
+
+	if (sk->sk_flags & FLAGS_TS_OR_DROPS)
+		__sock_recv_ts_and_drops(msg, sk, skb);
+	else
+		sk->sk_stamp = skb->tstamp;
+}
+
+/**
+ * sock_tx_timestamp - checks whether the outgoing packet is to be time stamped
+ * @sk:		socket sending this packet
+ * @tx_flags:	filled with instructions for time stamping
+ *
+ * Currently only depends on SOCK_TIMESTAMPING* flags. Returns error code if
+ * parameters are invalid.
+ */
+extern int sock_tx_timestamp(struct sock *sk, __u8 *tx_flags);
+
+/**
+ * sk_eat_skb - Release a skb if it is no longer needed
+ * @sk: socket to eat this skb from
+ * @skb: socket buffer to eat
+ * @copied_early: flag indicating whether DMA operations copied this data early
+ *
+ * This routine must be called with interrupts disabled or with the socket
+ * locked so that the sk_buff queue operation is ok.
+*/
+#ifdef CONFIG_NET_DMA
+static inline void sk_eat_skb(struct sock *sk, struct sk_buff *skb, int copied_early)
+{
+	__skb_unlink(skb, &sk->sk_receive_queue);
+	if (!copied_early)
+		__kfree_skb(skb);
+	else
+		__skb_queue_tail(&sk->sk_async_wait_queue, skb);
+}
+#else
+static inline void sk_eat_skb(struct sock *sk, struct sk_buff *skb, int copied_early)
+{
+	__skb_unlink(skb, &sk->sk_receive_queue);
+	__kfree_skb(skb);
+}
+#endif
+
+static inline
+struct net *sock_net(const struct sock *sk)
+{
+	return read_pnet(&sk->sk_net);
+}
+
+static inline
+void sock_net_set(struct sock *sk, struct net *net)
+{
+	write_pnet(&sk->sk_net, net);
+}
+
+/*
+ * Kernel sockets, f.e. rtnl or icmp_socket, are a part of a namespace.
+ * They should not hold a reference to a namespace in order to allow
+ * to stop it.
+ * Sockets after sk_change_net should be released using sk_release_kernel
+ */
+static inline void sk_change_net(struct sock *sk, struct net *net)
+{
+	put_net(sock_net(sk));
+	sock_net_set(sk, hold_net(net));
+}
+
+static inline struct sock *skb_steal_sock(struct sk_buff *skb)
+{
+	if (unlikely(skb->sk)) {
+		struct sock *sk = skb->sk;
+
+		skb->destructor = NULL;
+		skb->sk = NULL;
+		return sk;
+	}
+	return NULL;
+}
+
+extern void sock_enable_timestamp(struct sock *sk, int flag);
+extern int sock_get_timestamp(struct sock *, struct timeval __user *);
+extern int sock_get_timestampns(struct sock *, struct timespec __user *);
+
+/* 
+ *	Enable debug/info messages 
+ */
+extern int net_msg_warn;
+#define NETDEBUG(fmt, args...) \
+	do { if (net_msg_warn) printk(fmt,##args); } while (0)
+
+#define LIMIT_NETDEBUG(fmt, args...) \
+	do { if (net_msg_warn && net_ratelimit()) printk(fmt,##args); } while(0)
+
+extern __u32 sysctl_wmem_max;
+extern __u32 sysctl_rmem_max;
+
+extern void sk_init(void);
+
+extern int sysctl_optmem_max;
+
+extern __u32 sysctl_wmem_default;
+extern __u32 sysctl_rmem_default;
+
+#endif	/* _SOCK_H */
diff --git a/include/net/stp.h b/include/net/stp.h
new file mode 100644
index 00000000..ad447f10
--- /dev/null
+++ b/include/net/stp.h
@@ -0,0 +1,14 @@
+#ifndef _NET_STP_H
+#define _NET_STP_H
+
+struct stp_proto {
+	unsigned char	group_address[ETH_ALEN];
+	void		(*rcv)(const struct stp_proto *, struct sk_buff *,
+			       struct net_device *);
+	void		*data;
+};
+
+extern int stp_proto_register(const struct stp_proto *proto);
+extern void stp_proto_unregister(const struct stp_proto *proto);
+
+#endif /* _NET_STP_H */
diff --git a/include/net/tc_act/tc_csum.h b/include/net/tc_act/tc_csum.h
new file mode 100644
index 00000000..9e8710be
--- /dev/null
+++ b/include/net/tc_act/tc_csum.h
@@ -0,0 +1,15 @@
+#ifndef __NET_TC_CSUM_H
+#define __NET_TC_CSUM_H
+
+#include <linux/types.h>
+#include <net/act_api.h>
+
+struct tcf_csum {
+	struct tcf_common common;
+
+	u32 update_flags;
+};
+#define to_tcf_csum(pc) \
+	container_of(pc,struct tcf_csum,common)
+
+#endif /* __NET_TC_CSUM_H */
diff --git a/include/net/tc_act/tc_defact.h b/include/net/tc_act/tc_defact.h
new file mode 100644
index 00000000..65f024b8
--- /dev/null
+++ b/include/net/tc_act/tc_defact.h
@@ -0,0 +1,14 @@
+#ifndef __NET_TC_DEF_H
+#define __NET_TC_DEF_H
+
+#include <net/act_api.h>
+
+struct tcf_defact {
+	struct tcf_common	common;
+	u32     		tcfd_datalen;
+	void    		*tcfd_defdata;
+};
+#define to_defact(pc) \
+	container_of(pc, struct tcf_defact, common)
+
+#endif /* __NET_TC_DEF_H */
diff --git a/include/net/tc_act/tc_gact.h b/include/net/tc_act/tc_gact.h
new file mode 100644
index 00000000..9e3f6767
--- /dev/null
+++ b/include/net/tc_act/tc_gact.h
@@ -0,0 +1,17 @@
+#ifndef __NET_TC_GACT_H
+#define __NET_TC_GACT_H
+
+#include <net/act_api.h>
+
+struct tcf_gact {
+	struct tcf_common	common;
+#ifdef CONFIG_GACT_PROB
+        u16			tcfg_ptype;
+        u16			tcfg_pval;
+        int			tcfg_paction;
+#endif
+};
+#define to_gact(pc) \
+	container_of(pc, struct tcf_gact, common)
+
+#endif /* __NET_TC_GACT_H */
diff --git a/include/net/tc_act/tc_ipt.h b/include/net/tc_act/tc_ipt.h
new file mode 100644
index 00000000..f7d25dfc
--- /dev/null
+++ b/include/net/tc_act/tc_ipt.h
@@ -0,0 +1,17 @@
+#ifndef __NET_TC_IPT_H
+#define __NET_TC_IPT_H
+
+#include <net/act_api.h>
+
+struct xt_entry_target;
+
+struct tcf_ipt {
+	struct tcf_common	common;
+	u32			tcfi_hook;
+	char			*tcfi_tname;
+	struct xt_entry_target	*tcfi_t;
+};
+#define to_ipt(pc) \
+	container_of(pc, struct tcf_ipt, common)
+
+#endif /* __NET_TC_IPT_H */
diff --git a/include/net/tc_act/tc_mirred.h b/include/net/tc_act/tc_mirred.h
new file mode 100644
index 00000000..cfe29436
--- /dev/null
+++ b/include/net/tc_act/tc_mirred.h
@@ -0,0 +1,17 @@
+#ifndef __NET_TC_MIR_H
+#define __NET_TC_MIR_H
+
+#include <net/act_api.h>
+
+struct tcf_mirred {
+	struct tcf_common	common;
+	int			tcfm_eaction;
+	int			tcfm_ifindex;
+	int			tcfm_ok_push;
+	struct net_device	*tcfm_dev;
+	struct list_head	tcfm_list;
+};
+#define to_mirred(pc) \
+	container_of(pc, struct tcf_mirred, common)
+
+#endif /* __NET_TC_MIR_H */
diff --git a/include/net/tc_act/tc_nat.h b/include/net/tc_act/tc_nat.h
new file mode 100644
index 00000000..4a691f34
--- /dev/null
+++ b/include/net/tc_act/tc_nat.h
@@ -0,0 +1,21 @@
+#ifndef __NET_TC_NAT_H
+#define __NET_TC_NAT_H
+
+#include <linux/types.h>
+#include <net/act_api.h>
+
+struct tcf_nat {
+	struct tcf_common common;
+
+	__be32 old_addr;
+	__be32 new_addr;
+	__be32 mask;
+	u32 flags;
+};
+
+static inline struct tcf_nat *to_tcf_nat(struct tcf_common *pc)
+{
+	return container_of(pc, struct tcf_nat, common);
+}
+
+#endif /* __NET_TC_NAT_H */
diff --git a/include/net/tc_act/tc_pedit.h b/include/net/tc_act/tc_pedit.h
new file mode 100644
index 00000000..e6f6e159
--- /dev/null
+++ b/include/net/tc_act/tc_pedit.h
@@ -0,0 +1,15 @@
+#ifndef __NET_TC_PED_H
+#define __NET_TC_PED_H
+
+#include <net/act_api.h>
+
+struct tcf_pedit {
+	struct tcf_common	common;
+	unsigned char		tcfp_nkeys;
+	unsigned char		tcfp_flags;
+	struct tc_pedit_key	*tcfp_keys;
+};
+#define to_pedit(pc) \
+	container_of(pc, struct tcf_pedit, common)
+
+#endif /* __NET_TC_PED_H */
diff --git a/include/net/tc_act/tc_skbedit.h b/include/net/tc_act/tc_skbedit.h
new file mode 100644
index 00000000..e103fe02
--- /dev/null
+++ b/include/net/tc_act/tc_skbedit.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (c) 2008, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * Author: Alexander Duyck <alexander.h.duyck@intel.com>
+ */
+
+#ifndef __NET_TC_SKBEDIT_H
+#define __NET_TC_SKBEDIT_H
+
+#include <net/act_api.h>
+
+struct tcf_skbedit {
+	struct tcf_common	common;
+	u32			flags;
+	u32     		priority;
+	u32     		mark;
+	u16			queue_mapping;
+	/* XXX: 16-bit pad here? */
+};
+#define to_skbedit(pc) \
+	container_of(pc, struct tcf_skbedit, common)
+
+#endif /* __NET_TC_SKBEDIT_H */
diff --git a/include/net/tcp.h b/include/net/tcp.h
new file mode 100644
index 00000000..50660b3e
--- /dev/null
+++ b/include/net/tcp.h
@@ -0,0 +1,1581 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the TCP module.
+ *
+ * Version:	@(#)tcp.h	1.0.5	05/23/93
+ *
+ * Authors:	Ross Biro
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _TCP_H
+#define _TCP_H
+
+#define FASTRETRANS_DEBUG 1
+
+#include <linux/list.h>
+#include <linux/tcp.h>
+#include <linux/bug.h>
+#include <linux/slab.h>
+#include <linux/cache.h>
+#include <linux/percpu.h>
+#include <linux/skbuff.h>
+#include <linux/dmaengine.h>
+#include <linux/crypto.h>
+#include <linux/cryptohash.h>
+#include <linux/kref.h>
+
+#include <net/inet_connection_sock.h>
+#include <net/inet_timewait_sock.h>
+#include <net/inet_hashtables.h>
+#include <net/checksum.h>
+#include <net/request_sock.h>
+#include <net/sock.h>
+#include <net/snmp.h>
+#include <net/ip.h>
+#include <net/tcp_states.h>
+#include <net/inet_ecn.h>
+#include <net/dst.h>
+
+#include <linux/seq_file.h>
+#include <linux/memcontrol.h>
+
+extern struct inet_hashinfo tcp_hashinfo;
+
+extern struct percpu_counter tcp_orphan_count;
+extern void tcp_time_wait(struct sock *sk, int state, int timeo);
+
+#define MAX_TCP_HEADER	(128 + MAX_HEADER)
+#define MAX_TCP_OPTION_SPACE 40
+
+/* 
+ * Never offer a window over 32767 without using window scaling. Some
+ * poor stacks do signed 16bit maths! 
+ */
+#define MAX_TCP_WINDOW		32767U
+
+/* Offer an initial receive window of 10 mss. */
+#define TCP_DEFAULT_INIT_RCVWND	10
+
+/* Minimal accepted MSS. It is (60+60+8) - (20+20). */
+#define TCP_MIN_MSS		88U
+
+/* The least MTU to use for probing */
+#define TCP_BASE_MSS		512
+
+/* After receiving this amount of duplicate ACKs fast retransmit starts. */
+#define TCP_FASTRETRANS_THRESH 3
+
+/* Maximal reordering. */
+#define TCP_MAX_REORDERING	127
+
+/* Maximal number of ACKs sent quickly to accelerate slow-start. */
+#define TCP_MAX_QUICKACKS	16U
+
+/* urg_data states */
+#define TCP_URG_VALID	0x0100
+#define TCP_URG_NOTYET	0x0200
+#define TCP_URG_READ	0x0400
+
+#define TCP_RETR1	3	/*
+				 * This is how many retries it does before it
+				 * tries to figure out if the gateway is
+				 * down. Minimal RFC value is 3; it corresponds
+				 * to ~3sec-8min depending on RTO.
+				 */
+
+#define TCP_RETR2	15	/*
+				 * This should take at least
+				 * 90 minutes to time out.
+				 * RFC1122 says that the limit is 100 sec.
+				 * 15 is ~13-30min depending on RTO.
+				 */
+
+#define TCP_SYN_RETRIES	 5	/* number of times to retry active opening a
+				 * connection: ~180sec is RFC minimum	*/
+
+#define TCP_SYNACK_RETRIES 5	/* number of times to retry passive opening a
+				 * connection: ~180sec is RFC minimum	*/
+
+#define TCP_TIMEWAIT_LEN (60*HZ) /* how long to wait to destroy TIME-WAIT
+				  * state, about 60 seconds	*/
+#define TCP_FIN_TIMEOUT	TCP_TIMEWAIT_LEN
+                                 /* BSD style FIN_WAIT2 deadlock breaker.
+				  * It used to be 3min, new value is 60sec,
+				  * to combine FIN-WAIT-2 timeout with
+				  * TIME-WAIT timer.
+				  */
+
+#define TCP_DELACK_MAX	((unsigned)(HZ/5))	/* maximal time to delay before sending an ACK */
+#if HZ >= 100
+#define TCP_DELACK_MIN	((unsigned)(HZ/25))	/* minimal time to delay before sending an ACK */
+#define TCP_ATO_MIN	((unsigned)(HZ/25))
+#else
+#define TCP_DELACK_MIN	4U
+#define TCP_ATO_MIN	4U
+#endif
+#define TCP_RTO_MAX	((unsigned)(120*HZ))
+#define TCP_RTO_MIN	((unsigned)(HZ/5))
+#define TCP_TIMEOUT_INIT ((unsigned)(1*HZ))	/* RFC2988bis initial RTO value	*/
+#define TCP_TIMEOUT_FALLBACK ((unsigned)(3*HZ))	/* RFC 1122 initial RTO value, now
+						 * used as a fallback RTO for the
+						 * initial data transmission if no
+						 * valid RTT sample has been acquired,
+						 * most likely due to retrans in 3WHS.
+						 */
+
+#define TCP_RESOURCE_PROBE_INTERVAL ((unsigned)(HZ/2U)) /* Maximal interval between probes
+					                 * for local resources.
+					                 */
+
+#define TCP_KEEPALIVE_TIME	(120*60*HZ)	/* two hours */
+#define TCP_KEEPALIVE_PROBES	9		/* Max of 9 keepalive probes	*/
+#define TCP_KEEPALIVE_INTVL	(75*HZ)
+
+#define MAX_TCP_KEEPIDLE	32767
+#define MAX_TCP_KEEPINTVL	32767
+#define MAX_TCP_KEEPCNT		127
+#define MAX_TCP_SYNCNT		127
+
+#define TCP_SYNQ_INTERVAL	(HZ/5)	/* Period of SYNACK timer */
+
+#define TCP_PAWS_24DAYS	(60 * 60 * 24 * 24)
+#define TCP_PAWS_MSL	60		/* Per-host timestamps are invalidated
+					 * after this time. It should be equal
+					 * (or greater than) TCP_TIMEWAIT_LEN
+					 * to provide reliability equal to one
+					 * provided by timewait state.
+					 */
+#define TCP_PAWS_WINDOW	1		/* Replay window for per-host
+					 * timestamps. It must be less than
+					 * minimal timewait lifetime.
+					 */
+/*
+ *	TCP option
+ */
+ 
+#define TCPOPT_NOP		1	/* Padding */
+#define TCPOPT_EOL		0	/* End of options */
+#define TCPOPT_MSS		2	/* Segment size negotiating */
+#define TCPOPT_WINDOW		3	/* Window scaling */
+#define TCPOPT_SACK_PERM        4       /* SACK Permitted */
+#define TCPOPT_SACK             5       /* SACK Block */
+#define TCPOPT_TIMESTAMP	8	/* Better RTT estimations/PAWS */
+#define TCPOPT_MD5SIG		19	/* MD5 Signature (RFC2385) */
+#define TCPOPT_COOKIE		253	/* Cookie extension (experimental) */
+
+/*
+ *     TCP option lengths
+ */
+
+#define TCPOLEN_MSS            4
+#define TCPOLEN_WINDOW         3
+#define TCPOLEN_SACK_PERM      2
+#define TCPOLEN_TIMESTAMP      10
+#define TCPOLEN_MD5SIG         18
+#define TCPOLEN_COOKIE_BASE    2	/* Cookie-less header extension */
+#define TCPOLEN_COOKIE_PAIR    3	/* Cookie pair header extension */
+#define TCPOLEN_COOKIE_MIN     (TCPOLEN_COOKIE_BASE+TCP_COOKIE_MIN)
+#define TCPOLEN_COOKIE_MAX     (TCPOLEN_COOKIE_BASE+TCP_COOKIE_MAX)
+
+/* But this is what stacks really send out. */
+#define TCPOLEN_TSTAMP_ALIGNED		12
+#define TCPOLEN_WSCALE_ALIGNED		4
+#define TCPOLEN_SACKPERM_ALIGNED	4
+#define TCPOLEN_SACK_BASE		2
+#define TCPOLEN_SACK_BASE_ALIGNED	4
+#define TCPOLEN_SACK_PERBLOCK		8
+#define TCPOLEN_MD5SIG_ALIGNED		20
+#define TCPOLEN_MSS_ALIGNED		4
+
+/* Flags in tp->nonagle */
+#define TCP_NAGLE_OFF		1	/* Nagle's algo is disabled */
+#define TCP_NAGLE_CORK		2	/* Socket is corked	    */
+#define TCP_NAGLE_PUSH		4	/* Cork is overridden for already queued data */
+
+/* TCP thin-stream limits */
+#define TCP_THIN_LINEAR_RETRIES 6       /* After 6 linear retries, do exp. backoff */
+
+/* TCP initial congestion window as per draft-hkchu-tcpm-initcwnd-01 */
+#define TCP_INIT_CWND		10
+
+extern struct inet_timewait_death_row tcp_death_row;
+
+/* sysctl variables for tcp */
+extern int sysctl_tcp_timestamps;
+extern int sysctl_tcp_window_scaling;
+extern int sysctl_tcp_sack;
+extern int sysctl_tcp_fin_timeout;
+extern int sysctl_tcp_keepalive_time;
+extern int sysctl_tcp_keepalive_probes;
+extern int sysctl_tcp_keepalive_intvl;
+extern int sysctl_tcp_syn_retries;
+extern int sysctl_tcp_synack_retries;
+extern int sysctl_tcp_retries1;
+extern int sysctl_tcp_retries2;
+extern int sysctl_tcp_orphan_retries;
+extern int sysctl_tcp_syncookies;
+extern int sysctl_tcp_retrans_collapse;
+extern int sysctl_tcp_stdurg;
+extern int sysctl_tcp_rfc1337;
+extern int sysctl_tcp_abort_on_overflow;
+extern int sysctl_tcp_max_orphans;
+extern int sysctl_tcp_fack;
+extern int sysctl_tcp_reordering;
+extern int sysctl_tcp_ecn;
+extern int sysctl_tcp_dsack;
+extern int sysctl_tcp_wmem[3];
+extern int sysctl_tcp_rmem[3];
+extern int sysctl_tcp_app_win;
+extern int sysctl_tcp_adv_win_scale;
+extern int sysctl_tcp_tw_reuse;
+extern int sysctl_tcp_frto;
+extern int sysctl_tcp_frto_response;
+extern int sysctl_tcp_low_latency;
+extern int sysctl_tcp_dma_copybreak;
+extern int sysctl_tcp_nometrics_save;
+extern int sysctl_tcp_moderate_rcvbuf;
+extern int sysctl_tcp_tso_win_divisor;
+extern int sysctl_tcp_abc;
+extern int sysctl_tcp_mtu_probing;
+extern int sysctl_tcp_base_mss;
+extern int sysctl_tcp_workaround_signed_windows;
+extern int sysctl_tcp_slow_start_after_idle;
+extern int sysctl_tcp_max_ssthresh;
+extern int sysctl_tcp_cookie_size;
+extern int sysctl_tcp_thin_linear_timeouts;
+extern int sysctl_tcp_thin_dupack;
+
+extern atomic_long_t tcp_memory_allocated;
+extern struct percpu_counter tcp_sockets_allocated;
+extern int tcp_memory_pressure;
+
+/*
+ * The next routines deal with comparing 32 bit unsigned ints
+ * and worry about wraparound (automatic with unsigned arithmetic).
+ */
+
+static inline int before(__u32 seq1, __u32 seq2)
+{
+        return (__s32)(seq1-seq2) < 0;
+}
+#define after(seq2, seq1) 	before(seq1, seq2)
+
+/* is s2<=s1<=s3 ? */
+static inline int between(__u32 seq1, __u32 seq2, __u32 seq3)
+{
+	return seq3 - seq2 >= seq1 - seq2;
+}
+
+static inline bool tcp_out_of_memory(struct sock *sk)
+{
+	if (sk->sk_wmem_queued > SOCK_MIN_SNDBUF &&
+	    sk_memory_allocated(sk) > sk_prot_mem_limits(sk, 2))
+		return true;
+	return false;
+}
+
+static inline bool tcp_too_many_orphans(struct sock *sk, int shift)
+{
+	struct percpu_counter *ocp = sk->sk_prot->orphan_count;
+	int orphans = percpu_counter_read_positive(ocp);
+
+	if (orphans << shift > sysctl_tcp_max_orphans) {
+		orphans = percpu_counter_sum_positive(ocp);
+		if (orphans << shift > sysctl_tcp_max_orphans)
+			return true;
+	}
+	return false;
+}
+
+extern bool tcp_check_oom(struct sock *sk, int shift);
+
+/* syncookies: remember time of last synqueue overflow */
+static inline void tcp_synq_overflow(struct sock *sk)
+{
+	tcp_sk(sk)->rx_opt.ts_recent_stamp = jiffies;
+}
+
+/* syncookies: no recent synqueue overflow on this listening socket? */
+static inline int tcp_synq_no_recent_overflow(const struct sock *sk)
+{
+	unsigned long last_overflow = tcp_sk(sk)->rx_opt.ts_recent_stamp;
+	return time_after(jiffies, last_overflow + TCP_TIMEOUT_FALLBACK);
+}
+
+extern struct proto tcp_prot;
+
+#define TCP_INC_STATS(net, field)	SNMP_INC_STATS((net)->mib.tcp_statistics, field)
+#define TCP_INC_STATS_BH(net, field)	SNMP_INC_STATS_BH((net)->mib.tcp_statistics, field)
+#define TCP_DEC_STATS(net, field)	SNMP_DEC_STATS((net)->mib.tcp_statistics, field)
+#define TCP_ADD_STATS_USER(net, field, val) SNMP_ADD_STATS_USER((net)->mib.tcp_statistics, field, val)
+#define TCP_ADD_STATS(net, field, val)	SNMP_ADD_STATS((net)->mib.tcp_statistics, field, val)
+
+extern void tcp_init_mem(struct net *net);
+
+extern void tcp_v4_err(struct sk_buff *skb, u32);
+
+extern void tcp_shutdown (struct sock *sk, int how);
+
+extern int tcp_v4_rcv(struct sk_buff *skb);
+
+extern struct inet_peer *tcp_v4_get_peer(struct sock *sk, bool *release_it);
+extern void *tcp_v4_tw_get_peer(struct sock *sk);
+extern int tcp_v4_tw_remember_stamp(struct inet_timewait_sock *tw);
+extern int tcp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
+		       size_t size);
+extern int tcp_sendpage(struct sock *sk, struct page *page, int offset,
+			size_t size, int flags);
+extern int tcp_ioctl(struct sock *sk, int cmd, unsigned long arg);
+extern int tcp_rcv_state_process(struct sock *sk, struct sk_buff *skb,
+				 const struct tcphdr *th, unsigned int len);
+extern int tcp_rcv_established(struct sock *sk, struct sk_buff *skb,
+			       const struct tcphdr *th, unsigned int len);
+extern void tcp_rcv_space_adjust(struct sock *sk);
+extern void tcp_cleanup_rbuf(struct sock *sk, int copied);
+extern int tcp_twsk_unique(struct sock *sk, struct sock *sktw, void *twp);
+extern void tcp_twsk_destructor(struct sock *sk);
+extern ssize_t tcp_splice_read(struct socket *sk, loff_t *ppos,
+			       struct pipe_inode_info *pipe, size_t len,
+			       unsigned int flags);
+
+static inline void tcp_dec_quickack_mode(struct sock *sk,
+					 const unsigned int pkts)
+{
+	struct inet_connection_sock *icsk = inet_csk(sk);
+
+	if (icsk->icsk_ack.quick) {
+		if (pkts >= icsk->icsk_ack.quick) {
+			icsk->icsk_ack.quick = 0;
+			/* Leaving quickack mode we deflate ATO. */
+			icsk->icsk_ack.ato   = TCP_ATO_MIN;
+		} else
+			icsk->icsk_ack.quick -= pkts;
+	}
+}
+
+#define	TCP_ECN_OK		1
+#define	TCP_ECN_QUEUE_CWR	2
+#define	TCP_ECN_DEMAND_CWR	4
+#define	TCP_ECN_SEEN		8
+
+static __inline__ void
+TCP_ECN_create_request(struct request_sock *req, struct tcphdr *th)
+{
+	if (sysctl_tcp_ecn && th->ece && th->cwr)
+		inet_rsk(req)->ecn_ok = 1;
+}
+
+enum tcp_tw_status {
+	TCP_TW_SUCCESS = 0,
+	TCP_TW_RST = 1,
+	TCP_TW_ACK = 2,
+	TCP_TW_SYN = 3
+};
+
+
+extern enum tcp_tw_status tcp_timewait_state_process(struct inet_timewait_sock *tw,
+						     struct sk_buff *skb,
+						     const struct tcphdr *th);
+extern struct sock * tcp_check_req(struct sock *sk,struct sk_buff *skb,
+				   struct request_sock *req,
+				   struct request_sock **prev);
+extern int tcp_child_process(struct sock *parent, struct sock *child,
+			     struct sk_buff *skb);
+extern int tcp_use_frto(struct sock *sk);
+extern void tcp_enter_frto(struct sock *sk);
+extern void tcp_enter_loss(struct sock *sk, int how);
+extern void tcp_clear_retrans(struct tcp_sock *tp);
+extern void tcp_update_metrics(struct sock *sk);
+extern void tcp_close(struct sock *sk, long timeout);
+extern unsigned int tcp_poll(struct file * file, struct socket *sock,
+			     struct poll_table_struct *wait);
+extern int tcp_getsockopt(struct sock *sk, int level, int optname,
+			  char __user *optval, int __user *optlen);
+extern int tcp_setsockopt(struct sock *sk, int level, int optname,
+			  char __user *optval, unsigned int optlen);
+extern int compat_tcp_getsockopt(struct sock *sk, int level, int optname,
+				 char __user *optval, int __user *optlen);
+extern int compat_tcp_setsockopt(struct sock *sk, int level, int optname,
+				 char __user *optval, unsigned int optlen);
+extern void tcp_set_keepalive(struct sock *sk, int val);
+extern void tcp_syn_ack_timeout(struct sock *sk, struct request_sock *req);
+extern int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
+		       size_t len, int nonblock, int flags, int *addr_len);
+extern void tcp_parse_options(const struct sk_buff *skb,
+			      struct tcp_options_received *opt_rx, const u8 **hvpp,
+			      int estab);
+extern const u8 *tcp_parse_md5sig_option(const struct tcphdr *th);
+
+/*
+ *	TCP v4 functions exported for the inet6 API
+ */
+
+extern void tcp_v4_send_check(struct sock *sk, struct sk_buff *skb);
+extern int tcp_v4_conn_request(struct sock *sk, struct sk_buff *skb);
+extern struct sock * tcp_create_openreq_child(struct sock *sk,
+					      struct request_sock *req,
+					      struct sk_buff *skb);
+extern struct sock * tcp_v4_syn_recv_sock(struct sock *sk, struct sk_buff *skb,
+					  struct request_sock *req,
+					  struct dst_entry *dst);
+extern int tcp_v4_do_rcv(struct sock *sk, struct sk_buff *skb);
+extern int tcp_v4_connect(struct sock *sk, struct sockaddr *uaddr,
+			  int addr_len);
+extern int tcp_connect(struct sock *sk);
+extern struct sk_buff * tcp_make_synack(struct sock *sk, struct dst_entry *dst,
+					struct request_sock *req,
+					struct request_values *rvp);
+extern int tcp_disconnect(struct sock *sk, int flags);
+
+
+/* From syncookies.c */
+extern __u32 syncookie_secret[2][16-4+SHA_DIGEST_WORDS];
+extern struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb, 
+				    struct ip_options *opt);
+#ifdef CONFIG_SYN_COOKIES
+extern __u32 cookie_v4_init_sequence(struct sock *sk, struct sk_buff *skb, 
+				     __u16 *mss);
+#else
+static inline __u32 cookie_v4_init_sequence(struct sock *sk,
+					    struct sk_buff *skb,
+					    __u16 *mss)
+{
+	return 0;
+}
+#endif
+
+extern __u32 cookie_init_timestamp(struct request_sock *req);
+extern bool cookie_check_timestamp(struct tcp_options_received *opt, bool *);
+
+/* From net/ipv6/syncookies.c */
+extern struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb);
+#ifdef CONFIG_SYN_COOKIES
+extern __u32 cookie_v6_init_sequence(struct sock *sk, const struct sk_buff *skb,
+				     __u16 *mss);
+#else
+static inline __u32 cookie_v6_init_sequence(struct sock *sk,
+					    struct sk_buff *skb,
+					    __u16 *mss)
+{
+	return 0;
+}
+#endif
+/* tcp_output.c */
+
+extern void __tcp_push_pending_frames(struct sock *sk, unsigned int cur_mss,
+				      int nonagle);
+extern int tcp_may_send_now(struct sock *sk);
+extern int tcp_retransmit_skb(struct sock *, struct sk_buff *);
+extern void tcp_retransmit_timer(struct sock *sk);
+extern void tcp_xmit_retransmit_queue(struct sock *);
+extern void tcp_simple_retransmit(struct sock *);
+extern int tcp_trim_head(struct sock *, struct sk_buff *, u32);
+extern int tcp_fragment(struct sock *, struct sk_buff *, u32, unsigned int);
+
+extern void tcp_send_probe0(struct sock *);
+extern void tcp_send_partial(struct sock *);
+extern int tcp_write_wakeup(struct sock *);
+extern void tcp_send_fin(struct sock *sk);
+extern void tcp_send_active_reset(struct sock *sk, gfp_t priority);
+extern int tcp_send_synack(struct sock *);
+extern int tcp_syn_flood_action(struct sock *sk,
+				const struct sk_buff *skb,
+				const char *proto);
+extern void tcp_push_one(struct sock *, unsigned int mss_now);
+extern void tcp_send_ack(struct sock *sk);
+extern void tcp_send_delayed_ack(struct sock *sk);
+
+/* tcp_input.c */
+extern void tcp_cwnd_application_limited(struct sock *sk);
+
+/* tcp_timer.c */
+extern void tcp_init_xmit_timers(struct sock *);
+static inline void tcp_clear_xmit_timers(struct sock *sk)
+{
+	inet_csk_clear_xmit_timers(sk);
+}
+
+extern unsigned int tcp_sync_mss(struct sock *sk, u32 pmtu);
+extern unsigned int tcp_current_mss(struct sock *sk);
+
+/* Bound MSS / TSO packet size with the half of the window */
+static inline int tcp_bound_to_half_wnd(struct tcp_sock *tp, int pktsize)
+{
+	int cutoff;
+
+	/* When peer uses tiny windows, there is no use in packetizing
+	 * to sub-MSS pieces for the sake of SWS or making sure there
+	 * are enough packets in the pipe for fast recovery.
+	 *
+	 * On the other hand, for extremely large MSS devices, handling
+	 * smaller than MSS windows in this way does make sense.
+	 */
+	if (tp->max_window >= 512)
+		cutoff = (tp->max_window >> 1);
+	else
+		cutoff = tp->max_window;
+
+	if (cutoff && pktsize > cutoff)
+		return max_t(int, cutoff, 68U - tp->tcp_header_len);
+	else
+		return pktsize;
+}
+
+/* tcp.c */
+extern void tcp_get_info(const struct sock *, struct tcp_info *);
+
+/* Read 'sendfile()'-style from a TCP socket */
+typedef int (*sk_read_actor_t)(read_descriptor_t *, struct sk_buff *,
+				unsigned int, size_t);
+extern int tcp_read_sock(struct sock *sk, read_descriptor_t *desc,
+			 sk_read_actor_t recv_actor);
+
+extern void tcp_initialize_rcv_mss(struct sock *sk);
+
+extern int tcp_mtu_to_mss(const struct sock *sk, int pmtu);
+extern int tcp_mss_to_mtu(const struct sock *sk, int mss);
+extern void tcp_mtup_init(struct sock *sk);
+extern void tcp_valid_rtt_meas(struct sock *sk, u32 seq_rtt);
+
+static inline void tcp_bound_rto(const struct sock *sk)
+{
+	if (inet_csk(sk)->icsk_rto > TCP_RTO_MAX)
+		inet_csk(sk)->icsk_rto = TCP_RTO_MAX;
+}
+
+static inline u32 __tcp_set_rto(const struct tcp_sock *tp)
+{
+	return (tp->srtt >> 3) + tp->rttvar;
+}
+
+static inline void __tcp_fast_path_on(struct tcp_sock *tp, u32 snd_wnd)
+{
+	tp->pred_flags = htonl((tp->tcp_header_len << 26) |
+			       ntohl(TCP_FLAG_ACK) |
+			       snd_wnd);
+}
+
+static inline void tcp_fast_path_on(struct tcp_sock *tp)
+{
+	__tcp_fast_path_on(tp, tp->snd_wnd >> tp->rx_opt.snd_wscale);
+}
+
+static inline void tcp_fast_path_check(struct sock *sk)
+{
+	struct tcp_sock *tp = tcp_sk(sk);
+
+	if (skb_queue_empty(&tp->out_of_order_queue) &&
+	    tp->rcv_wnd &&
+	    atomic_read(&sk->sk_rmem_alloc) < sk->sk_rcvbuf &&
+	    !tp->urg_data)
+		tcp_fast_path_on(tp);
+}
+
+/* Compute the actual rto_min value */
+static inline u32 tcp_rto_min(struct sock *sk)
+{
+	const struct dst_entry *dst = __sk_dst_get(sk);
+	u32 rto_min = TCP_RTO_MIN;
+
+	if (dst && dst_metric_locked(dst, RTAX_RTO_MIN))
+		rto_min = dst_metric_rtt(dst, RTAX_RTO_MIN);
+	return rto_min;
+}
+
+/* Compute the actual receive window we are currently advertising.
+ * Rcv_nxt can be after the window if our peer push more data
+ * than the offered window.
+ */
+static inline u32 tcp_receive_window(const struct tcp_sock *tp)
+{
+	s32 win = tp->rcv_wup + tp->rcv_wnd - tp->rcv_nxt;
+
+	if (win < 0)
+		win = 0;
+	return (u32) win;
+}
+
+/* Choose a new window, without checks for shrinking, and without
+ * scaling applied to the result.  The caller does these things
+ * if necessary.  This is a "raw" window selection.
+ */
+extern u32 __tcp_select_window(struct sock *sk);
+
+/* TCP timestamps are only 32-bits, this causes a slight
+ * complication on 64-bit systems since we store a snapshot
+ * of jiffies in the buffer control blocks below.  We decided
+ * to use only the low 32-bits of jiffies and hide the ugly
+ * casts with the following macro.
+ */
+#define tcp_time_stamp		((__u32)(jiffies))
+
+#define tcp_flag_byte(th) (((u_int8_t *)th)[13])
+
+#define TCPHDR_FIN 0x01
+#define TCPHDR_SYN 0x02
+#define TCPHDR_RST 0x04
+#define TCPHDR_PSH 0x08
+#define TCPHDR_ACK 0x10
+#define TCPHDR_URG 0x20
+#define TCPHDR_ECE 0x40
+#define TCPHDR_CWR 0x80
+
+/* This is what the send packet queuing engine uses to pass
+ * TCP per-packet control information to the transmission code.
+ * We also store the host-order sequence numbers in here too.
+ * This is 44 bytes if IPV6 is enabled.
+ * If this grows please adjust skbuff.h:skbuff->cb[xxx] size appropriately.
+ */
+struct tcp_skb_cb {
+	union {
+		struct inet_skb_parm	h4;
+#if IS_ENABLED(CONFIG_IPV6)
+		struct inet6_skb_parm	h6;
+#endif
+	} header;	/* For incoming frames		*/
+	__u32		seq;		/* Starting sequence number	*/
+	__u32		end_seq;	/* SEQ + FIN + SYN + datalen	*/
+	__u32		when;		/* used to compute rtt's	*/
+	__u8		tcp_flags;	/* TCP header flags. (tcp[13])	*/
+	__u8		sacked;		/* State flags for SACK/FACK.	*/
+#define TCPCB_SACKED_ACKED	0x01	/* SKB ACK'd by a SACK block	*/
+#define TCPCB_SACKED_RETRANS	0x02	/* SKB retransmitted		*/
+#define TCPCB_LOST		0x04	/* SKB is lost			*/
+#define TCPCB_TAGBITS		0x07	/* All tag bits			*/
+	__u8		ip_dsfield;	/* IPv4 tos or IPv6 dsfield	*/
+	/* 1 byte hole */
+#define TCPCB_EVER_RETRANS	0x80	/* Ever retransmitted frame	*/
+#define TCPCB_RETRANS		(TCPCB_SACKED_RETRANS|TCPCB_EVER_RETRANS)
+
+	__u32		ack_seq;	/* Sequence number ACK'd	*/
+};
+
+#define TCP_SKB_CB(__skb)	((struct tcp_skb_cb *)&((__skb)->cb[0]))
+
+/* Due to TSO, an SKB can be composed of multiple actual
+ * packets.  To keep these tracked properly, we use this.
+ */
+static inline int tcp_skb_pcount(const struct sk_buff *skb)
+{
+	return skb_shinfo(skb)->gso_segs;
+}
+
+/* This is valid iff tcp_skb_pcount() > 1. */
+static inline int tcp_skb_mss(const struct sk_buff *skb)
+{
+	return skb_shinfo(skb)->gso_size;
+}
+
+/* Events passed to congestion control interface */
+enum tcp_ca_event {
+	CA_EVENT_TX_START,	/* first transmit when no packets in flight */
+	CA_EVENT_CWND_RESTART,	/* congestion window restart */
+	CA_EVENT_COMPLETE_CWR,	/* end of congestion recovery */
+	CA_EVENT_FRTO,		/* fast recovery timeout */
+	CA_EVENT_LOSS,		/* loss timeout */
+	CA_EVENT_FAST_ACK,	/* in sequence ack */
+	CA_EVENT_SLOW_ACK,	/* other ack */
+};
+
+/*
+ * Interface for adding new TCP congestion control handlers
+ */
+#define TCP_CA_NAME_MAX	16
+#define TCP_CA_MAX	128
+#define TCP_CA_BUF_MAX	(TCP_CA_NAME_MAX*TCP_CA_MAX)
+
+#define TCP_CONG_NON_RESTRICTED 0x1
+#define TCP_CONG_RTT_STAMP	0x2
+
+struct tcp_congestion_ops {
+	struct list_head	list;
+	unsigned long flags;
+
+	/* initialize private data (optional) */
+	void (*init)(struct sock *sk);
+	/* cleanup private data  (optional) */
+	void (*release)(struct sock *sk);
+
+	/* return slow start threshold (required) */
+	u32 (*ssthresh)(struct sock *sk);
+	/* lower bound for congestion window (optional) */
+	u32 (*min_cwnd)(const struct sock *sk);
+	/* do new cwnd calculation (required) */
+	void (*cong_avoid)(struct sock *sk, u32 ack, u32 in_flight);
+	/* call before changing ca_state (optional) */
+	void (*set_state)(struct sock *sk, u8 new_state);
+	/* call when cwnd event occurs (optional) */
+	void (*cwnd_event)(struct sock *sk, enum tcp_ca_event ev);
+	/* new value of cwnd after loss (optional) */
+	u32  (*undo_cwnd)(struct sock *sk);
+	/* hook for packet ack accounting (optional) */
+	void (*pkts_acked)(struct sock *sk, u32 num_acked, s32 rtt_us);
+	/* get info for inet_diag (optional) */
+	void (*get_info)(struct sock *sk, u32 ext, struct sk_buff *skb);
+
+	char 		name[TCP_CA_NAME_MAX];
+	struct module 	*owner;
+};
+
+extern int tcp_register_congestion_control(struct tcp_congestion_ops *type);
+extern void tcp_unregister_congestion_control(struct tcp_congestion_ops *type);
+
+extern void tcp_init_congestion_control(struct sock *sk);
+extern void tcp_cleanup_congestion_control(struct sock *sk);
+extern int tcp_set_default_congestion_control(const char *name);
+extern void tcp_get_default_congestion_control(char *name);
+extern void tcp_get_available_congestion_control(char *buf, size_t len);
+extern void tcp_get_allowed_congestion_control(char *buf, size_t len);
+extern int tcp_set_allowed_congestion_control(char *allowed);
+extern int tcp_set_congestion_control(struct sock *sk, const char *name);
+extern void tcp_slow_start(struct tcp_sock *tp);
+extern void tcp_cong_avoid_ai(struct tcp_sock *tp, u32 w);
+
+extern struct tcp_congestion_ops tcp_init_congestion_ops;
+extern u32 tcp_reno_ssthresh(struct sock *sk);
+extern void tcp_reno_cong_avoid(struct sock *sk, u32 ack, u32 in_flight);
+extern u32 tcp_reno_min_cwnd(const struct sock *sk);
+extern struct tcp_congestion_ops tcp_reno;
+
+static inline void tcp_set_ca_state(struct sock *sk, const u8 ca_state)
+{
+	struct inet_connection_sock *icsk = inet_csk(sk);
+
+	if (icsk->icsk_ca_ops->set_state)
+		icsk->icsk_ca_ops->set_state(sk, ca_state);
+	icsk->icsk_ca_state = ca_state;
+}
+
+static inline void tcp_ca_event(struct sock *sk, const enum tcp_ca_event event)
+{
+	const struct inet_connection_sock *icsk = inet_csk(sk);
+
+	if (icsk->icsk_ca_ops->cwnd_event)
+		icsk->icsk_ca_ops->cwnd_event(sk, event);
+}
+
+/* These functions determine how the current flow behaves in respect of SACK
+ * handling. SACK is negotiated with the peer, and therefore it can vary
+ * between different flows.
+ *
+ * tcp_is_sack - SACK enabled
+ * tcp_is_reno - No SACK
+ * tcp_is_fack - FACK enabled, implies SACK enabled
+ */
+static inline int tcp_is_sack(const struct tcp_sock *tp)
+{
+	return tp->rx_opt.sack_ok;
+}
+
+static inline int tcp_is_reno(const struct tcp_sock *tp)
+{
+	return !tcp_is_sack(tp);
+}
+
+static inline int tcp_is_fack(const struct tcp_sock *tp)
+{
+	return tp->rx_opt.sack_ok & TCP_FACK_ENABLED;
+}
+
+static inline void tcp_enable_fack(struct tcp_sock *tp)
+{
+	tp->rx_opt.sack_ok |= TCP_FACK_ENABLED;
+}
+
+static inline unsigned int tcp_left_out(const struct tcp_sock *tp)
+{
+	return tp->sacked_out + tp->lost_out;
+}
+
+/* This determines how many packets are "in the network" to the best
+ * of our knowledge.  In many cases it is conservative, but where
+ * detailed information is available from the receiver (via SACK
+ * blocks etc.) we can make more aggressive calculations.
+ *
+ * Use this for decisions involving congestion control, use just
+ * tp->packets_out to determine if the send queue is empty or not.
+ *
+ * Read this equation as:
+ *
+ *	"Packets sent once on transmission queue" MINUS
+ *	"Packets left network, but not honestly ACKed yet" PLUS
+ *	"Packets fast retransmitted"
+ */
+static inline unsigned int tcp_packets_in_flight(const struct tcp_sock *tp)
+{
+	return tp->packets_out - tcp_left_out(tp) + tp->retrans_out;
+}
+
+#define TCP_INFINITE_SSTHRESH	0x7fffffff
+
+static inline bool tcp_in_initial_slowstart(const struct tcp_sock *tp)
+{
+	return tp->snd_ssthresh >= TCP_INFINITE_SSTHRESH;
+}
+
+/* If cwnd > ssthresh, we may raise ssthresh to be half-way to cwnd.
+ * The exception is rate halving phase, when cwnd is decreasing towards
+ * ssthresh.
+ */
+static inline __u32 tcp_current_ssthresh(const struct sock *sk)
+{
+	const struct tcp_sock *tp = tcp_sk(sk);
+
+	if ((1 << inet_csk(sk)->icsk_ca_state) & (TCPF_CA_CWR | TCPF_CA_Recovery))
+		return tp->snd_ssthresh;
+	else
+		return max(tp->snd_ssthresh,
+			   ((tp->snd_cwnd >> 1) +
+			    (tp->snd_cwnd >> 2)));
+}
+
+/* Use define here intentionally to get WARN_ON location shown at the caller */
+#define tcp_verify_left_out(tp)	WARN_ON(tcp_left_out(tp) > tp->packets_out)
+
+extern void tcp_enter_cwr(struct sock *sk, const int set_ssthresh);
+extern __u32 tcp_init_cwnd(const struct tcp_sock *tp, const struct dst_entry *dst);
+
+/* The maximum number of MSS of available cwnd for which TSO defers
+ * sending if not using sysctl_tcp_tso_win_divisor.
+ */
+static inline __u32 tcp_max_tso_deferred_mss(const struct tcp_sock *tp)
+{
+	return 3;
+}
+
+/* Slow start with delack produces 3 packets of burst, so that
+ * it is safe "de facto".  This will be the default - same as
+ * the default reordering threshold - but if reordering increases,
+ * we must be able to allow cwnd to burst at least this much in order
+ * to not pull it back when holes are filled.
+ */
+static __inline__ __u32 tcp_max_burst(const struct tcp_sock *tp)
+{
+	return tp->reordering;
+}
+
+/* Returns end sequence number of the receiver's advertised window */
+static inline u32 tcp_wnd_end(const struct tcp_sock *tp)
+{
+	return tp->snd_una + tp->snd_wnd;
+}
+extern int tcp_is_cwnd_limited(const struct sock *sk, u32 in_flight);
+
+static inline void tcp_minshall_update(struct tcp_sock *tp, unsigned int mss,
+				       const struct sk_buff *skb)
+{
+	if (skb->len < mss)
+		tp->snd_sml = TCP_SKB_CB(skb)->end_seq;
+}
+
+static inline void tcp_check_probe_timer(struct sock *sk)
+{
+	const struct tcp_sock *tp = tcp_sk(sk);
+	const struct inet_connection_sock *icsk = inet_csk(sk);
+
+	if (!tp->packets_out && !icsk->icsk_pending)
+		inet_csk_reset_xmit_timer(sk, ICSK_TIME_PROBE0,
+					  icsk->icsk_rto, TCP_RTO_MAX);
+}
+
+static inline void tcp_init_wl(struct tcp_sock *tp, u32 seq)
+{
+	tp->snd_wl1 = seq;
+}
+
+static inline void tcp_update_wl(struct tcp_sock *tp, u32 seq)
+{
+	tp->snd_wl1 = seq;
+}
+
+/*
+ * Calculate(/check) TCP checksum
+ */
+static inline __sum16 tcp_v4_check(int len, __be32 saddr,
+				   __be32 daddr, __wsum base)
+{
+	return csum_tcpudp_magic(saddr,daddr,len,IPPROTO_TCP,base);
+}
+
+static inline __sum16 __tcp_checksum_complete(struct sk_buff *skb)
+{
+	return __skb_checksum_complete(skb);
+}
+
+static inline int tcp_checksum_complete(struct sk_buff *skb)
+{
+	return !skb_csum_unnecessary(skb) &&
+		__tcp_checksum_complete(skb);
+}
+
+/* Prequeue for VJ style copy to user, combined with checksumming. */
+
+static inline void tcp_prequeue_init(struct tcp_sock *tp)
+{
+	tp->ucopy.task = NULL;
+	tp->ucopy.len = 0;
+	tp->ucopy.memory = 0;
+	skb_queue_head_init(&tp->ucopy.prequeue);
+#ifdef CONFIG_NET_DMA
+	tp->ucopy.dma_chan = NULL;
+	tp->ucopy.wakeup = 0;
+	tp->ucopy.pinned_list = NULL;
+	tp->ucopy.dma_cookie = 0;
+#endif
+}
+
+/* Packet is added to VJ-style prequeue for processing in process
+ * context, if a reader task is waiting. Apparently, this exciting
+ * idea (VJ's mail "Re: query about TCP header on tcp-ip" of 07 Sep 93)
+ * failed somewhere. Latency? Burstiness? Well, at least now we will
+ * see, why it failed. 8)8)				  --ANK
+ *
+ * NOTE: is this not too big to inline?
+ */
+static inline int tcp_prequeue(struct sock *sk, struct sk_buff *skb)
+{
+	struct tcp_sock *tp = tcp_sk(sk);
+
+	if (sysctl_tcp_low_latency || !tp->ucopy.task)
+		return 0;
+
+	__skb_queue_tail(&tp->ucopy.prequeue, skb);
+	tp->ucopy.memory += skb->truesize;
+	if (tp->ucopy.memory > sk->sk_rcvbuf) {
+		struct sk_buff *skb1;
+
+		BUG_ON(sock_owned_by_user(sk));
+
+		while ((skb1 = __skb_dequeue(&tp->ucopy.prequeue)) != NULL) {
+			sk_backlog_rcv(sk, skb1);
+			NET_INC_STATS_BH(sock_net(sk),
+					 LINUX_MIB_TCPPREQUEUEDROPPED);
+		}
+
+		tp->ucopy.memory = 0;
+	} else if (skb_queue_len(&tp->ucopy.prequeue) == 1) {
+		wake_up_interruptible_sync_poll(sk_sleep(sk),
+					   POLLIN | POLLRDNORM | POLLRDBAND);
+		if (!inet_csk_ack_scheduled(sk))
+			inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK,
+						  (3 * tcp_rto_min(sk)) / 4,
+						  TCP_RTO_MAX);
+	}
+	return 1;
+}
+
+
+#undef STATE_TRACE
+
+#ifdef STATE_TRACE
+static const char *statename[]={
+	"Unused","Established","Syn Sent","Syn Recv",
+	"Fin Wait 1","Fin Wait 2","Time Wait", "Close",
+	"Close Wait","Last ACK","Listen","Closing"
+};
+#endif
+extern void tcp_set_state(struct sock *sk, int state);
+
+extern void tcp_done(struct sock *sk);
+
+static inline void tcp_sack_reset(struct tcp_options_received *rx_opt)
+{
+	rx_opt->dsack = 0;
+	rx_opt->num_sacks = 0;
+}
+
+/* Determine a window scaling and initial window to offer. */
+extern void tcp_select_initial_window(int __space, __u32 mss,
+				      __u32 *rcv_wnd, __u32 *window_clamp,
+				      int wscale_ok, __u8 *rcv_wscale,
+				      __u32 init_rcv_wnd);
+
+static inline int tcp_win_from_space(int space)
+{
+	return sysctl_tcp_adv_win_scale<=0 ?
+		(space>>(-sysctl_tcp_adv_win_scale)) :
+		space - (space>>sysctl_tcp_adv_win_scale);
+}
+
+/* Note: caller must be prepared to deal with negative returns */ 
+static inline int tcp_space(const struct sock *sk)
+{
+	return tcp_win_from_space(sk->sk_rcvbuf -
+				  atomic_read(&sk->sk_rmem_alloc));
+} 
+
+static inline int tcp_full_space(const struct sock *sk)
+{
+	return tcp_win_from_space(sk->sk_rcvbuf); 
+}
+
+static inline void tcp_openreq_init(struct request_sock *req,
+				    struct tcp_options_received *rx_opt,
+				    struct sk_buff *skb)
+{
+	struct inet_request_sock *ireq = inet_rsk(req);
+
+	req->rcv_wnd = 0;		/* So that tcp_send_synack() knows! */
+	req->cookie_ts = 0;
+	tcp_rsk(req)->rcv_isn = TCP_SKB_CB(skb)->seq;
+	req->mss = rx_opt->mss_clamp;
+	req->ts_recent = rx_opt->saw_tstamp ? rx_opt->rcv_tsval : 0;
+	ireq->tstamp_ok = rx_opt->tstamp_ok;
+	ireq->sack_ok = rx_opt->sack_ok;
+	ireq->snd_wscale = rx_opt->snd_wscale;
+	ireq->wscale_ok = rx_opt->wscale_ok;
+	ireq->acked = 0;
+	ireq->ecn_ok = 0;
+	ireq->rmt_port = tcp_hdr(skb)->source;
+	ireq->loc_port = tcp_hdr(skb)->dest;
+}
+
+extern void tcp_enter_memory_pressure(struct sock *sk);
+
+static inline int keepalive_intvl_when(const struct tcp_sock *tp)
+{
+	return tp->keepalive_intvl ? : sysctl_tcp_keepalive_intvl;
+}
+
+static inline int keepalive_time_when(const struct tcp_sock *tp)
+{
+	return tp->keepalive_time ? : sysctl_tcp_keepalive_time;
+}
+
+static inline int keepalive_probes(const struct tcp_sock *tp)
+{
+	return tp->keepalive_probes ? : sysctl_tcp_keepalive_probes;
+}
+
+static inline u32 keepalive_time_elapsed(const struct tcp_sock *tp)
+{
+	const struct inet_connection_sock *icsk = &tp->inet_conn;
+
+	return min_t(u32, tcp_time_stamp - icsk->icsk_ack.lrcvtime,
+			  tcp_time_stamp - tp->rcv_tstamp);
+}
+
+static inline int tcp_fin_time(const struct sock *sk)
+{
+	int fin_timeout = tcp_sk(sk)->linger2 ? : sysctl_tcp_fin_timeout;
+	const int rto = inet_csk(sk)->icsk_rto;
+
+	if (fin_timeout < (rto << 2) - (rto >> 1))
+		fin_timeout = (rto << 2) - (rto >> 1);
+
+	return fin_timeout;
+}
+
+static inline int tcp_paws_check(const struct tcp_options_received *rx_opt,
+				 int paws_win)
+{
+	if ((s32)(rx_opt->ts_recent - rx_opt->rcv_tsval) <= paws_win)
+		return 1;
+	if (unlikely(get_seconds() >= rx_opt->ts_recent_stamp + TCP_PAWS_24DAYS))
+		return 1;
+	/*
+	 * Some OSes send SYN and SYNACK messages with tsval=0 tsecr=0,
+	 * then following tcp messages have valid values. Ignore 0 value,
+	 * or else 'negative' tsval might forbid us to accept their packets.
+	 */
+	if (!rx_opt->ts_recent)
+		return 1;
+	return 0;
+}
+
+static inline int tcp_paws_reject(const struct tcp_options_received *rx_opt,
+				  int rst)
+{
+	if (tcp_paws_check(rx_opt, 0))
+		return 0;
+
+	/* RST segments are not recommended to carry timestamp,
+	   and, if they do, it is recommended to ignore PAWS because
+	   "their cleanup function should take precedence over timestamps."
+	   Certainly, it is mistake. It is necessary to understand the reasons
+	   of this constraint to relax it: if peer reboots, clock may go
+	   out-of-sync and half-open connections will not be reset.
+	   Actually, the problem would be not existing if all
+	   the implementations followed draft about maintaining clock
+	   via reboots. Linux-2.2 DOES NOT!
+
+	   However, we can relax time bounds for RST segments to MSL.
+	 */
+	if (rst && get_seconds() >= rx_opt->ts_recent_stamp + TCP_PAWS_MSL)
+		return 0;
+	return 1;
+}
+
+static inline void tcp_mib_init(struct net *net)
+{
+	/* See RFC 2012 */
+	TCP_ADD_STATS_USER(net, TCP_MIB_RTOALGORITHM, 1);
+	TCP_ADD_STATS_USER(net, TCP_MIB_RTOMIN, TCP_RTO_MIN*1000/HZ);
+	TCP_ADD_STATS_USER(net, TCP_MIB_RTOMAX, TCP_RTO_MAX*1000/HZ);
+	TCP_ADD_STATS_USER(net, TCP_MIB_MAXCONN, -1);
+}
+
+/* from STCP */
+static inline void tcp_clear_retrans_hints_partial(struct tcp_sock *tp)
+{
+	tp->lost_skb_hint = NULL;
+	tp->scoreboard_skb_hint = NULL;
+}
+
+static inline void tcp_clear_all_retrans_hints(struct tcp_sock *tp)
+{
+	tcp_clear_retrans_hints_partial(tp);
+	tp->retransmit_skb_hint = NULL;
+}
+
+/* MD5 Signature */
+struct crypto_hash;
+
+union tcp_md5_addr {
+	struct in_addr  a4;
+#if IS_ENABLED(CONFIG_IPV6)
+	struct in6_addr	a6;
+#endif
+};
+
+/* - key database */
+struct tcp_md5sig_key {
+	struct hlist_node	node;
+	u8			keylen;
+	u8			family; /* AF_INET or AF_INET6 */
+	union tcp_md5_addr	addr;
+	u8			key[TCP_MD5SIG_MAXKEYLEN];
+	struct rcu_head		rcu;
+};
+
+/* - sock block */
+struct tcp_md5sig_info {
+	struct hlist_head	head;
+	struct rcu_head		rcu;
+};
+
+/* - pseudo header */
+struct tcp4_pseudohdr {
+	__be32		saddr;
+	__be32		daddr;
+	__u8		pad;
+	__u8		protocol;
+	__be16		len;
+};
+
+struct tcp6_pseudohdr {
+	struct in6_addr	saddr;
+	struct in6_addr daddr;
+	__be32		len;
+	__be32		protocol;	/* including padding */
+};
+
+union tcp_md5sum_block {
+	struct tcp4_pseudohdr ip4;
+#if IS_ENABLED(CONFIG_IPV6)
+	struct tcp6_pseudohdr ip6;
+#endif
+};
+
+/* - pool: digest algorithm, hash description and scratch buffer */
+struct tcp_md5sig_pool {
+	struct hash_desc	md5_desc;
+	union tcp_md5sum_block	md5_blk;
+};
+
+/* - functions */
+extern int tcp_v4_md5_hash_skb(char *md5_hash, struct tcp_md5sig_key *key,
+			       const struct sock *sk,
+			       const struct request_sock *req,
+			       const struct sk_buff *skb);
+extern int tcp_md5_do_add(struct sock *sk, const union tcp_md5_addr *addr,
+			  int family, const u8 *newkey,
+			  u8 newkeylen, gfp_t gfp);
+extern int tcp_md5_do_del(struct sock *sk, const union tcp_md5_addr *addr,
+			  int family);
+extern struct tcp_md5sig_key *tcp_v4_md5_lookup(struct sock *sk,
+					 struct sock *addr_sk);
+
+#ifdef CONFIG_TCP_MD5SIG
+extern struct tcp_md5sig_key *tcp_md5_do_lookup(struct sock *sk,
+			const union tcp_md5_addr *addr, int family);
+#define tcp_twsk_md5_key(twsk)	((twsk)->tw_md5_key)
+#else
+static inline struct tcp_md5sig_key *tcp_md5_do_lookup(struct sock *sk,
+					 const union tcp_md5_addr *addr,
+					 int family)
+{
+	return NULL;
+}
+#define tcp_twsk_md5_key(twsk)	NULL
+#endif
+
+extern struct tcp_md5sig_pool __percpu *tcp_alloc_md5sig_pool(struct sock *);
+extern void tcp_free_md5sig_pool(void);
+
+extern struct tcp_md5sig_pool	*tcp_get_md5sig_pool(void);
+extern void tcp_put_md5sig_pool(void);
+
+extern int tcp_md5_hash_header(struct tcp_md5sig_pool *, const struct tcphdr *);
+extern int tcp_md5_hash_skb_data(struct tcp_md5sig_pool *, const struct sk_buff *,
+				 unsigned header_len);
+extern int tcp_md5_hash_key(struct tcp_md5sig_pool *hp,
+			    const struct tcp_md5sig_key *key);
+
+/* write queue abstraction */
+static inline void tcp_write_queue_purge(struct sock *sk)
+{
+	struct sk_buff *skb;
+
+	while ((skb = __skb_dequeue(&sk->sk_write_queue)) != NULL)
+		sk_wmem_free_skb(sk, skb);
+	sk_mem_reclaim(sk);
+	tcp_clear_all_retrans_hints(tcp_sk(sk));
+}
+
+static inline struct sk_buff *tcp_write_queue_head(const struct sock *sk)
+{
+	return skb_peek(&sk->sk_write_queue);
+}
+
+static inline struct sk_buff *tcp_write_queue_tail(const struct sock *sk)
+{
+	return skb_peek_tail(&sk->sk_write_queue);
+}
+
+static inline struct sk_buff *tcp_write_queue_next(const struct sock *sk,
+						   const struct sk_buff *skb)
+{
+	return skb_queue_next(&sk->sk_write_queue, skb);
+}
+
+static inline struct sk_buff *tcp_write_queue_prev(const struct sock *sk,
+						   const struct sk_buff *skb)
+{
+	return skb_queue_prev(&sk->sk_write_queue, skb);
+}
+
+#define tcp_for_write_queue(skb, sk)					\
+	skb_queue_walk(&(sk)->sk_write_queue, skb)
+
+#define tcp_for_write_queue_from(skb, sk)				\
+	skb_queue_walk_from(&(sk)->sk_write_queue, skb)
+
+#define tcp_for_write_queue_from_safe(skb, tmp, sk)			\
+	skb_queue_walk_from_safe(&(sk)->sk_write_queue, skb, tmp)
+
+static inline struct sk_buff *tcp_send_head(const struct sock *sk)
+{
+	return sk->sk_send_head;
+}
+
+static inline bool tcp_skb_is_last(const struct sock *sk,
+				   const struct sk_buff *skb)
+{
+	return skb_queue_is_last(&sk->sk_write_queue, skb);
+}
+
+static inline void tcp_advance_send_head(struct sock *sk, const struct sk_buff *skb)
+{
+	if (tcp_skb_is_last(sk, skb))
+		sk->sk_send_head = NULL;
+	else
+		sk->sk_send_head = tcp_write_queue_next(sk, skb);
+}
+
+static inline void tcp_check_send_head(struct sock *sk, struct sk_buff *skb_unlinked)
+{
+	if (sk->sk_send_head == skb_unlinked)
+		sk->sk_send_head = NULL;
+}
+
+static inline void tcp_init_send_head(struct sock *sk)
+{
+	sk->sk_send_head = NULL;
+}
+
+static inline void __tcp_add_write_queue_tail(struct sock *sk, struct sk_buff *skb)
+{
+	__skb_queue_tail(&sk->sk_write_queue, skb);
+}
+
+static inline void tcp_add_write_queue_tail(struct sock *sk, struct sk_buff *skb)
+{
+	__tcp_add_write_queue_tail(sk, skb);
+
+	/* Queue it, remembering where we must start sending. */
+	if (sk->sk_send_head == NULL) {
+		sk->sk_send_head = skb;
+
+		if (tcp_sk(sk)->highest_sack == NULL)
+			tcp_sk(sk)->highest_sack = skb;
+	}
+}
+
+static inline void __tcp_add_write_queue_head(struct sock *sk, struct sk_buff *skb)
+{
+	__skb_queue_head(&sk->sk_write_queue, skb);
+}
+
+/* Insert buff after skb on the write queue of sk.  */
+static inline void tcp_insert_write_queue_after(struct sk_buff *skb,
+						struct sk_buff *buff,
+						struct sock *sk)
+{
+	__skb_queue_after(&sk->sk_write_queue, skb, buff);
+}
+
+/* Insert new before skb on the write queue of sk.  */
+static inline void tcp_insert_write_queue_before(struct sk_buff *new,
+						  struct sk_buff *skb,
+						  struct sock *sk)
+{
+	__skb_queue_before(&sk->sk_write_queue, skb, new);
+
+	if (sk->sk_send_head == skb)
+		sk->sk_send_head = new;
+}
+
+static inline void tcp_unlink_write_queue(struct sk_buff *skb, struct sock *sk)
+{
+	__skb_unlink(skb, &sk->sk_write_queue);
+}
+
+static inline int tcp_write_queue_empty(struct sock *sk)
+{
+	return skb_queue_empty(&sk->sk_write_queue);
+}
+
+static inline void tcp_push_pending_frames(struct sock *sk)
+{
+	if (tcp_send_head(sk)) {
+		struct tcp_sock *tp = tcp_sk(sk);
+
+		__tcp_push_pending_frames(sk, tcp_current_mss(sk), tp->nonagle);
+	}
+}
+
+/* Start sequence of the skb just after the highest skb with SACKed
+ * bit, valid only if sacked_out > 0 or when the caller has ensured
+ * validity by itself.
+ */
+static inline u32 tcp_highest_sack_seq(struct tcp_sock *tp)
+{
+	if (!tp->sacked_out)
+		return tp->snd_una;
+
+	if (tp->highest_sack == NULL)
+		return tp->snd_nxt;
+
+	return TCP_SKB_CB(tp->highest_sack)->seq;
+}
+
+static inline void tcp_advance_highest_sack(struct sock *sk, struct sk_buff *skb)
+{
+	tcp_sk(sk)->highest_sack = tcp_skb_is_last(sk, skb) ? NULL :
+						tcp_write_queue_next(sk, skb);
+}
+
+static inline struct sk_buff *tcp_highest_sack(struct sock *sk)
+{
+	return tcp_sk(sk)->highest_sack;
+}
+
+static inline void tcp_highest_sack_reset(struct sock *sk)
+{
+	tcp_sk(sk)->highest_sack = tcp_write_queue_head(sk);
+}
+
+/* Called when old skb is about to be deleted (to be combined with new skb) */
+static inline void tcp_highest_sack_combine(struct sock *sk,
+					    struct sk_buff *old,
+					    struct sk_buff *new)
+{
+	if (tcp_sk(sk)->sacked_out && (old == tcp_sk(sk)->highest_sack))
+		tcp_sk(sk)->highest_sack = new;
+}
+
+/* Determines whether this is a thin stream (which may suffer from
+ * increased latency). Used to trigger latency-reducing mechanisms.
+ */
+static inline unsigned int tcp_stream_is_thin(struct tcp_sock *tp)
+{
+	return tp->packets_out < 4 && !tcp_in_initial_slowstart(tp);
+}
+
+/* /proc */
+enum tcp_seq_states {
+	TCP_SEQ_STATE_LISTENING,
+	TCP_SEQ_STATE_OPENREQ,
+	TCP_SEQ_STATE_ESTABLISHED,
+	TCP_SEQ_STATE_TIME_WAIT,
+};
+
+int tcp_seq_open(struct inode *inode, struct file *file);
+
+struct tcp_seq_afinfo {
+	char				*name;
+	sa_family_t			family;
+	const struct file_operations	*seq_fops;
+	struct seq_operations		seq_ops;
+};
+
+struct tcp_iter_state {
+	struct seq_net_private	p;
+	sa_family_t		family;
+	enum tcp_seq_states	state;
+	struct sock		*syn_wait_sk;
+	int			bucket, offset, sbucket, num, uid;
+	loff_t			last_pos;
+};
+
+extern int tcp_proc_register(struct net *net, struct tcp_seq_afinfo *afinfo);
+extern void tcp_proc_unregister(struct net *net, struct tcp_seq_afinfo *afinfo);
+
+extern struct request_sock_ops tcp_request_sock_ops;
+extern struct request_sock_ops tcp6_request_sock_ops;
+
+extern void tcp_v4_destroy_sock(struct sock *sk);
+
+extern int tcp_v4_gso_send_check(struct sk_buff *skb);
+extern struct sk_buff *tcp_tso_segment(struct sk_buff *skb,
+				       netdev_features_t features);
+extern struct sk_buff **tcp_gro_receive(struct sk_buff **head,
+					struct sk_buff *skb);
+extern struct sk_buff **tcp4_gro_receive(struct sk_buff **head,
+					 struct sk_buff *skb);
+extern int tcp_gro_complete(struct sk_buff *skb);
+extern int tcp4_gro_complete(struct sk_buff *skb);
+
+extern int tcp_nuke_addr(struct net *net, struct sockaddr *addr);
+
+#ifdef CONFIG_PROC_FS
+extern int tcp4_proc_init(void);
+extern void tcp4_proc_exit(void);
+#endif
+
+/* TCP af-specific functions */
+struct tcp_sock_af_ops {
+#ifdef CONFIG_TCP_MD5SIG
+	struct tcp_md5sig_key	*(*md5_lookup) (struct sock *sk,
+						struct sock *addr_sk);
+	int			(*calc_md5_hash) (char *location,
+						  struct tcp_md5sig_key *md5,
+						  const struct sock *sk,
+						  const struct request_sock *req,
+						  const struct sk_buff *skb);
+	int			(*md5_parse) (struct sock *sk,
+					      char __user *optval,
+					      int optlen);
+#endif
+};
+
+struct tcp_request_sock_ops {
+#ifdef CONFIG_TCP_MD5SIG
+	struct tcp_md5sig_key	*(*md5_lookup) (struct sock *sk,
+						struct request_sock *req);
+	int			(*calc_md5_hash) (char *location,
+						  struct tcp_md5sig_key *md5,
+						  const struct sock *sk,
+						  const struct request_sock *req,
+						  const struct sk_buff *skb);
+#endif
+};
+
+/* Using SHA1 for now, define some constants.
+ */
+#define COOKIE_DIGEST_WORDS (SHA_DIGEST_WORDS)
+#define COOKIE_MESSAGE_WORDS (SHA_MESSAGE_BYTES / 4)
+#define COOKIE_WORKSPACE_WORDS (COOKIE_DIGEST_WORDS + COOKIE_MESSAGE_WORDS)
+
+extern int tcp_cookie_generator(u32 *bakery);
+
+/**
+ *	struct tcp_cookie_values - each socket needs extra space for the
+ *	cookies, together with (optional) space for any SYN data.
+ *
+ *	A tcp_sock contains a pointer to the current value, and this is
+ *	cloned to the tcp_timewait_sock.
+ *
+ * @cookie_pair:	variable data from the option exchange.
+ *
+ * @cookie_desired:	user specified tcpct_cookie_desired.  Zero
+ *			indicates default (sysctl_tcp_cookie_size).
+ *			After cookie sent, remembers size of cookie.
+ *			Range 0, TCP_COOKIE_MIN to TCP_COOKIE_MAX.
+ *
+ * @s_data_desired:	user specified tcpct_s_data_desired.  When the
+ *			constant payload is specified (@s_data_constant),
+ *			holds its length instead.
+ *			Range 0 to TCP_MSS_DESIRED.
+ *
+ * @s_data_payload:	constant data that is to be included in the
+ *			payload of SYN or SYNACK segments when the
+ *			cookie option is present.
+ */
+struct tcp_cookie_values {
+	struct kref	kref;
+	u8		cookie_pair[TCP_COOKIE_PAIR_SIZE];
+	u8		cookie_pair_size;
+	u8		cookie_desired;
+	u16		s_data_desired:11,
+			s_data_constant:1,
+			s_data_in:1,
+			s_data_out:1,
+			s_data_unused:2;
+	u8		s_data_payload[0];
+};
+
+static inline void tcp_cookie_values_release(struct kref *kref)
+{
+	kfree(container_of(kref, struct tcp_cookie_values, kref));
+}
+
+/* The length of constant payload data.  Note that s_data_desired is
+ * overloaded, depending on s_data_constant: either the length of constant
+ * data (returned here) or the limit on variable data.
+ */
+static inline int tcp_s_data_size(const struct tcp_sock *tp)
+{
+	return (tp->cookie_values != NULL && tp->cookie_values->s_data_constant)
+		? tp->cookie_values->s_data_desired
+		: 0;
+}
+
+/**
+ *	struct tcp_extend_values - tcp_ipv?.c to tcp_output.c workspace.
+ *
+ *	As tcp_request_sock has already been extended in other places, the
+ *	only remaining method is to pass stack values along as function
+ *	parameters.  These parameters are not needed after sending SYNACK.
+ *
+ * @cookie_bakery:	cryptographic secret and message workspace.
+ *
+ * @cookie_plus:	bytes in authenticator/cookie option, copied from
+ *			struct tcp_options_received (above).
+ */
+struct tcp_extend_values {
+	struct request_values		rv;
+	u32				cookie_bakery[COOKIE_WORKSPACE_WORDS];
+	u8				cookie_plus:6,
+					cookie_out_never:1,
+					cookie_in_always:1;
+};
+
+static inline struct tcp_extend_values *tcp_xv(struct request_values *rvp)
+{
+	return (struct tcp_extend_values *)rvp;
+}
+
+extern void tcp_v4_init(void);
+extern void tcp_init(void);
+
+#endif	/* _TCP_H */
diff --git a/include/net/tcp_memcontrol.h b/include/net/tcp_memcontrol.h
new file mode 100644
index 00000000..48410ff2
--- /dev/null
+++ b/include/net/tcp_memcontrol.h
@@ -0,0 +1,19 @@
+#ifndef _TCP_MEMCG_H
+#define _TCP_MEMCG_H
+
+struct tcp_memcontrol {
+	struct cg_proto cg_proto;
+	/* per-cgroup tcp memory pressure knobs */
+	struct res_counter tcp_memory_allocated;
+	struct percpu_counter tcp_sockets_allocated;
+	/* those two are read-mostly, leave them at the end */
+	long tcp_prot_mem[3];
+	int tcp_memory_pressure;
+};
+
+struct cg_proto *tcp_proto_cgroup(struct mem_cgroup *memcg);
+int tcp_init_cgroup(struct cgroup *cgrp, struct cgroup_subsys *ss);
+void tcp_destroy_cgroup(struct cgroup *cgrp);
+unsigned long long tcp_max_memory(const struct mem_cgroup *memcg);
+void tcp_prot_mem(struct mem_cgroup *memcg, long val, int idx);
+#endif /* _TCP_MEMCG_H */
diff --git a/include/net/tcp_states.h b/include/net/tcp_states.h
new file mode 100644
index 00000000..b0b64598
--- /dev/null
+++ b/include/net/tcp_states.h
@@ -0,0 +1,50 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the TCP protocol sk_state field.
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _LINUX_TCP_STATES_H
+#define _LINUX_TCP_STATES_H
+
+enum {
+	TCP_ESTABLISHED = 1,
+	TCP_SYN_SENT,
+	TCP_SYN_RECV,
+	TCP_FIN_WAIT1,
+	TCP_FIN_WAIT2,
+	TCP_TIME_WAIT,
+	TCP_CLOSE,
+	TCP_CLOSE_WAIT,
+	TCP_LAST_ACK,
+	TCP_LISTEN,
+	TCP_CLOSING,	/* Now a valid state */
+
+	TCP_MAX_STATES	/* Leave at the end! */
+};
+
+#define TCP_STATE_MASK	0xF
+
+#define TCP_ACTION_FIN	(1 << 7)
+
+enum {
+	TCPF_ESTABLISHED = (1 << 1),
+	TCPF_SYN_SENT	 = (1 << 2),
+	TCPF_SYN_RECV	 = (1 << 3),
+	TCPF_FIN_WAIT1	 = (1 << 4),
+	TCPF_FIN_WAIT2	 = (1 << 5),
+	TCPF_TIME_WAIT	 = (1 << 6),
+	TCPF_CLOSE	 = (1 << 7),
+	TCPF_CLOSE_WAIT	 = (1 << 8),
+	TCPF_LAST_ACK	 = (1 << 9),
+	TCPF_LISTEN	 = (1 << 10),
+	TCPF_CLOSING	 = (1 << 11) 
+};
+
+#endif	/* _LINUX_TCP_STATES_H */
diff --git a/include/net/timewait_sock.h b/include/net/timewait_sock.h
new file mode 100644
index 00000000..8d6689cb
--- /dev/null
+++ b/include/net/timewait_sock.h
@@ -0,0 +1,51 @@
+/*
+ * NET		Generic infrastructure for Network protocols.
+ *
+ * Authors:	Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _TIMEWAIT_SOCK_H
+#define _TIMEWAIT_SOCK_H
+
+#include <linux/slab.h>
+#include <linux/bug.h>
+#include <net/sock.h>
+
+struct timewait_sock_ops {
+	struct kmem_cache	*twsk_slab;
+	char		*twsk_slab_name;
+	unsigned int	twsk_obj_size;
+	int		(*twsk_unique)(struct sock *sk,
+				       struct sock *sktw, void *twp);
+	void		(*twsk_destructor)(struct sock *sk);
+	void		*(*twsk_getpeer)(struct sock *sk);
+};
+
+static inline int twsk_unique(struct sock *sk, struct sock *sktw, void *twp)
+{
+	if (sk->sk_prot->twsk_prot->twsk_unique != NULL)
+		return sk->sk_prot->twsk_prot->twsk_unique(sk, sktw, twp);
+	return 0;
+}
+
+static inline void twsk_destructor(struct sock *sk)
+{
+	BUG_ON(sk == NULL);
+	BUG_ON(sk->sk_prot == NULL);
+	BUG_ON(sk->sk_prot->twsk_prot == NULL);
+	if (sk->sk_prot->twsk_prot->twsk_destructor != NULL)
+		sk->sk_prot->twsk_prot->twsk_destructor(sk);
+}
+
+static inline void *twsk_getpeer(struct sock *sk)
+{
+	if (sk->sk_prot->twsk_prot->twsk_getpeer)
+		return sk->sk_prot->twsk_prot->twsk_getpeer(sk);
+	return NULL;
+}
+
+#endif /* _TIMEWAIT_SOCK_H */
diff --git a/include/net/transp_v6.h b/include/net/transp_v6.h
new file mode 100644
index 00000000..48b42ea9
--- /dev/null
+++ b/include/net/transp_v6.h
@@ -0,0 +1,61 @@
+#ifndef _TRANSP_V6_H
+#define _TRANSP_V6_H
+
+#include <net/checksum.h>
+
+/*
+ *	IPv6 transport protocols
+ */
+
+extern struct proto rawv6_prot;
+extern struct proto udpv6_prot;
+extern struct proto udplitev6_prot;
+extern struct proto tcpv6_prot;
+extern struct proto pingv6_prot;
+
+struct flowi6;
+
+/* extension headers */
+extern int				ipv6_exthdrs_init(void);
+extern void				ipv6_exthdrs_exit(void);
+extern int				ipv6_frag_init(void);
+extern void				ipv6_frag_exit(void);
+
+/* transport protocols */
+extern int				pingv6_init(void);
+extern void				pingv6_exit(void);
+extern int				rawv6_init(void);
+extern void				rawv6_exit(void);
+extern int				udpv6_init(void);
+extern void				udpv6_exit(void);
+extern int 				udplitev6_init(void);
+extern void 				udplitev6_exit(void);
+extern int				tcpv6_init(void);
+extern void				tcpv6_exit(void);
+
+extern int				udpv6_connect(struct sock *sk,
+						      struct sockaddr *uaddr,
+						      int addr_len);
+
+extern int			datagram_recv_ctl(struct sock *sk,
+						  struct msghdr *msg,
+						  struct sk_buff *skb);
+
+extern int			datagram_send_ctl(struct net *net,
+						  struct sock *sk,
+						  struct msghdr *msg,
+						  struct flowi6 *fl6,
+						  struct ipv6_txoptions *opt,
+						  int *hlimit, int *tclass,
+						  int *dontfrag);
+
+#define		LOOPBACK4_IPV6		cpu_to_be32(0x7f000006)
+
+/*
+ *	address family specific functions
+ */
+extern const struct inet_connection_sock_af_ops ipv4_specific;
+
+extern void inet6_destroy_sock(struct sock *sk);
+
+#endif
diff --git a/include/net/udp.h b/include/net/udp.h
new file mode 100644
index 00000000..5d606d9d
--- /dev/null
+++ b/include/net/udp.h
@@ -0,0 +1,270 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the UDP module.
+ *
+ * Version:	@(#)udp.h	1.0.2	05/07/93
+ *
+ * Authors:	Ross Biro
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ * Fixes:
+ *		Alan Cox	: Turned on udp checksums. I don't want to
+ *				  chase 'memory corruption' bugs that aren't!
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UDP_H
+#define _UDP_H
+
+#include <linux/list.h>
+#include <linux/bug.h>
+#include <net/inet_sock.h>
+#include <net/sock.h>
+#include <net/snmp.h>
+#include <net/ip.h>
+#include <linux/ipv6.h>
+#include <linux/seq_file.h>
+#include <linux/poll.h>
+
+/**
+ *	struct udp_skb_cb  -  UDP(-Lite) private variables
+ *
+ *	@header:      private variables used by IPv4/IPv6
+ *	@cscov:       checksum coverage length (UDP-Lite only)
+ *	@partial_cov: if set indicates partial csum coverage
+ */
+struct udp_skb_cb {
+	union {
+		struct inet_skb_parm	h4;
+#if IS_ENABLED(CONFIG_IPV6)
+		struct inet6_skb_parm	h6;
+#endif
+	} header;
+	__u16		cscov;
+	__u8		partial_cov;
+};
+#define UDP_SKB_CB(__skb)	((struct udp_skb_cb *)((__skb)->cb))
+
+/**
+ *	struct udp_hslot - UDP hash slot
+ *
+ *	@head:	head of list of sockets
+ *	@count:	number of sockets in 'head' list
+ *	@lock:	spinlock protecting changes to head/count
+ */
+struct udp_hslot {
+	struct hlist_nulls_head	head;
+	int			count;
+	spinlock_t		lock;
+} __attribute__((aligned(2 * sizeof(long))));
+
+/**
+ *	struct udp_table - UDP table
+ *
+ *	@hash:	hash table, sockets are hashed on (local port)
+ *	@hash2:	hash table, sockets are hashed on (local port, local address)
+ *	@mask:	number of slots in hash tables, minus 1
+ *	@log:	log2(number of slots in hash table)
+ */
+struct udp_table {
+	struct udp_hslot	*hash;
+	struct udp_hslot	*hash2;
+	unsigned int		mask;
+	unsigned int		log;
+};
+extern struct udp_table udp_table;
+extern void udp_table_init(struct udp_table *, const char *);
+static inline struct udp_hslot *udp_hashslot(struct udp_table *table,
+					     struct net *net, unsigned num)
+{
+	return &table->hash[udp_hashfn(net, num, table->mask)];
+}
+/*
+ * For secondary hash, net_hash_mix() is performed before calling
+ * udp_hashslot2(), this explains difference with udp_hashslot()
+ */
+static inline struct udp_hslot *udp_hashslot2(struct udp_table *table,
+					      unsigned int hash)
+{
+	return &table->hash2[hash & table->mask];
+}
+
+/* Note: this must match 'valbool' in sock_setsockopt */
+#define UDP_CSUM_NOXMIT		1
+
+/* Used by SunRPC/xprt layer. */
+#define UDP_CSUM_NORCV		2
+
+/* Default, as per the RFC, is to always do csums. */
+#define UDP_CSUM_DEFAULT	0
+
+extern struct proto udp_prot;
+
+extern atomic_long_t udp_memory_allocated;
+
+/* sysctl variables for udp */
+extern long sysctl_udp_mem[3];
+extern int sysctl_udp_rmem_min;
+extern int sysctl_udp_wmem_min;
+
+struct sk_buff;
+
+/*
+ *	Generic checksumming routines for UDP(-Lite) v4 and v6
+ */
+static inline __sum16 __udp_lib_checksum_complete(struct sk_buff *skb)
+{
+	return __skb_checksum_complete_head(skb, UDP_SKB_CB(skb)->cscov);
+}
+
+static inline int udp_lib_checksum_complete(struct sk_buff *skb)
+{
+	return !skb_csum_unnecessary(skb) &&
+		__udp_lib_checksum_complete(skb);
+}
+
+/**
+ * 	udp_csum_outgoing  -  compute UDPv4/v6 checksum over fragments
+ * 	@sk: 	socket we are writing to
+ * 	@skb: 	sk_buff containing the filled-in UDP header
+ * 	        (checksum field must be zeroed out)
+ */
+static inline __wsum udp_csum_outgoing(struct sock *sk, struct sk_buff *skb)
+{
+	__wsum csum = csum_partial(skb_transport_header(skb),
+				   sizeof(struct udphdr), 0);
+	skb_queue_walk(&sk->sk_write_queue, skb) {
+		csum = csum_add(csum, skb->csum);
+	}
+	return csum;
+}
+
+static inline __wsum udp_csum(struct sk_buff *skb)
+{
+	__wsum csum = csum_partial(skb_transport_header(skb),
+				   sizeof(struct udphdr), skb->csum);
+
+	for (skb = skb_shinfo(skb)->frag_list; skb; skb = skb->next) {
+		csum = csum_add(csum, skb->csum);
+	}
+	return csum;
+}
+
+/* hash routines shared between UDPv4/6 and UDP-Litev4/6 */
+static inline void udp_lib_hash(struct sock *sk)
+{
+	BUG();
+}
+
+extern void udp_lib_unhash(struct sock *sk);
+extern void udp_lib_rehash(struct sock *sk, u16 new_hash);
+
+static inline void udp_lib_close(struct sock *sk, long timeout)
+{
+	sk_common_release(sk);
+}
+
+extern int udp_lib_get_port(struct sock *sk, unsigned short snum,
+			    int (*)(const struct sock *,const struct sock *),
+			    unsigned int hash2_nulladdr);
+
+/* net/ipv4/udp.c */
+extern int udp_get_port(struct sock *sk, unsigned short snum,
+			int (*saddr_cmp)(const struct sock *,
+					 const struct sock *));
+extern void udp_err(struct sk_buff *, u32);
+extern int udp_sendmsg(struct kiocb *iocb, struct sock *sk,
+			    struct msghdr *msg, size_t len);
+extern void udp_flush_pending_frames(struct sock *sk);
+extern int udp_rcv(struct sk_buff *skb);
+extern int udp_ioctl(struct sock *sk, int cmd, unsigned long arg);
+extern int udp_disconnect(struct sock *sk, int flags);
+extern unsigned int udp_poll(struct file *file, struct socket *sock,
+			     poll_table *wait);
+extern int udp_lib_getsockopt(struct sock *sk, int level, int optname,
+			      char __user *optval, int __user *optlen);
+extern int udp_lib_setsockopt(struct sock *sk, int level, int optname,
+			      char __user *optval, unsigned int optlen,
+			      int (*push_pending_frames)(struct sock *));
+extern struct sock *udp4_lib_lookup(struct net *net, __be32 saddr, __be16 sport,
+				    __be32 daddr, __be16 dport,
+				    int dif);
+extern struct sock *__udp4_lib_lookup(struct net *net, __be32 saddr, __be16 sport,
+				    __be32 daddr, __be16 dport,
+				    int dif, struct udp_table *tbl);
+extern struct sock *udp6_lib_lookup(struct net *net, const struct in6_addr *saddr, __be16 sport,
+				    const struct in6_addr *daddr, __be16 dport,
+				    int dif);
+extern struct sock *__udp6_lib_lookup(struct net *net, const struct in6_addr *saddr, __be16 sport,
+				    const struct in6_addr *daddr, __be16 dport,
+				    int dif, struct udp_table *tbl);
+
+/*
+ * 	SNMP statistics for UDP and UDP-Lite
+ */
+#define UDP_INC_STATS_USER(net, field, is_udplite)	      do { \
+	if (is_udplite) SNMP_INC_STATS_USER((net)->mib.udplite_statistics, field);       \
+	else		SNMP_INC_STATS_USER((net)->mib.udp_statistics, field);  }  while(0)
+#define UDP_INC_STATS_BH(net, field, is_udplite) 	      do { \
+	if (is_udplite) SNMP_INC_STATS_BH((net)->mib.udplite_statistics, field);         \
+	else		SNMP_INC_STATS_BH((net)->mib.udp_statistics, field);    }  while(0)
+
+#define UDP6_INC_STATS_BH(net, field, is_udplite) 	    do { \
+	if (is_udplite) SNMP_INC_STATS_BH((net)->mib.udplite_stats_in6, field);\
+	else		SNMP_INC_STATS_BH((net)->mib.udp_stats_in6, field);  \
+} while(0)
+#define UDP6_INC_STATS_USER(net, field, __lite)		    do { \
+	if (__lite) SNMP_INC_STATS_USER((net)->mib.udplite_stats_in6, field);  \
+	else	    SNMP_INC_STATS_USER((net)->mib.udp_stats_in6, field);      \
+} while(0)
+
+#if IS_ENABLED(CONFIG_IPV6)
+#define UDPX_INC_STATS_BH(sk, field) \
+	do { \
+		if ((sk)->sk_family == AF_INET) \
+			UDP_INC_STATS_BH(sock_net(sk), field, 0); \
+		else \
+			UDP6_INC_STATS_BH(sock_net(sk), field, 0); \
+	} while (0);
+#else
+#define UDPX_INC_STATS_BH(sk, field) UDP_INC_STATS_BH(sock_net(sk), field, 0)
+#endif
+
+/* /proc */
+int udp_seq_open(struct inode *inode, struct file *file);
+
+struct udp_seq_afinfo {
+	char				*name;
+	sa_family_t			family;
+	struct udp_table		*udp_table;
+	const struct file_operations	*seq_fops;
+	struct seq_operations		seq_ops;
+};
+
+struct udp_iter_state {
+	struct seq_net_private  p;
+	sa_family_t		family;
+	int			bucket;
+	struct udp_table	*udp_table;
+};
+
+#ifdef CONFIG_PROC_FS
+extern int udp_proc_register(struct net *net, struct udp_seq_afinfo *afinfo);
+extern void udp_proc_unregister(struct net *net, struct udp_seq_afinfo *afinfo);
+
+extern int udp4_proc_init(void);
+extern void udp4_proc_exit(void);
+#endif
+
+extern void udp_init(void);
+
+extern int udp4_ufo_send_check(struct sk_buff *skb);
+extern struct sk_buff *udp4_ufo_fragment(struct sk_buff *skb,
+	netdev_features_t features);
+#endif	/* _UDP_H */
diff --git a/include/net/udplite.h b/include/net/udplite.h
new file mode 100644
index 00000000..71375459
--- /dev/null
+++ b/include/net/udplite.h
@@ -0,0 +1,132 @@
+/*
+ *	Definitions for the UDP-Lite (RFC 3828) code.
+ */
+#ifndef _UDPLITE_H
+#define _UDPLITE_H
+
+#include <net/ip6_checksum.h>
+
+/* UDP-Lite socket options */
+#define UDPLITE_SEND_CSCOV   10 /* sender partial coverage (as sent)      */
+#define UDPLITE_RECV_CSCOV   11 /* receiver partial coverage (threshold ) */
+
+extern struct proto 		udplite_prot;
+extern struct udp_table		udplite_table;
+
+/*
+ *	Checksum computation is all in software, hence simpler getfrag.
+ */
+static __inline__ int udplite_getfrag(void *from, char *to, int  offset,
+				      int len, int odd, struct sk_buff *skb)
+{
+	return memcpy_fromiovecend(to, (struct iovec *) from, offset, len);
+}
+
+/* Designate sk as UDP-Lite socket */
+static inline int udplite_sk_init(struct sock *sk)
+{
+	udp_sk(sk)->pcflag = UDPLITE_BIT;
+	return 0;
+}
+
+/*
+ * 	Checksumming routines
+ */
+static inline int udplite_checksum_init(struct sk_buff *skb, struct udphdr *uh)
+{
+	u16 cscov;
+
+        /* In UDPv4 a zero checksum means that the transmitter generated no
+         * checksum. UDP-Lite (like IPv6) mandates checksums, hence packets
+         * with a zero checksum field are illegal.                            */
+	if (uh->check == 0) {
+		LIMIT_NETDEBUG(KERN_DEBUG "UDPLite: zeroed checksum field\n");
+		return 1;
+	}
+
+	cscov = ntohs(uh->len);
+
+	if (cscov == 0)		 /* Indicates that full coverage is required. */
+		;
+	else if (cscov < 8  || cscov > skb->len) {
+		/*
+		 * Coverage length violates RFC 3828: log and discard silently.
+		 */
+		LIMIT_NETDEBUG(KERN_DEBUG "UDPLite: bad csum coverage %d/%d\n",
+			       cscov, skb->len);
+		return 1;
+
+	} else if (cscov < skb->len) {
+        	UDP_SKB_CB(skb)->partial_cov = 1;
+		UDP_SKB_CB(skb)->cscov = cscov;
+		if (skb->ip_summed == CHECKSUM_COMPLETE)
+			skb->ip_summed = CHECKSUM_NONE;
+        }
+
+	return 0;
+}
+
+/* Slow-path computation of checksum. Socket is locked. */
+static inline __wsum udplite_csum_outgoing(struct sock *sk, struct sk_buff *skb)
+{
+	const struct udp_sock *up = udp_sk(skb->sk);
+	int cscov = up->len;
+	__wsum csum = 0;
+
+	if (up->pcflag & UDPLITE_SEND_CC) {
+		/*
+		 * Sender has set `partial coverage' option on UDP-Lite socket.
+		 * The special case "up->pcslen == 0" signifies full coverage.
+		 */
+		if (up->pcslen < up->len) {
+			if (0 < up->pcslen)
+				cscov = up->pcslen;
+			udp_hdr(skb)->len = htons(up->pcslen);
+		}
+		/*
+		 * NOTE: Causes for the error case  `up->pcslen > up->len':
+		 *        (i)  Application error (will not be penalized).
+		 *       (ii)  Payload too big for send buffer: data is split
+		 *             into several packets, each with its own header.
+		 *             In this case (e.g. last segment), coverage may
+		 *             exceed packet length.
+		 *       Since packets with coverage length > packet length are
+		 *       illegal, we fall back to the defaults here.
+		 */
+	}
+
+	skb->ip_summed = CHECKSUM_NONE;     /* no HW support for checksumming */
+
+	skb_queue_walk(&sk->sk_write_queue, skb) {
+		const int off = skb_transport_offset(skb);
+		const int len = skb->len - off;
+
+		csum = skb_checksum(skb, off, (cscov > len)? len : cscov, csum);
+
+		if ((cscov -= len) <= 0)
+			break;
+	}
+	return csum;
+}
+
+/* Fast-path computation of checksum. Socket may not be locked. */
+static inline __wsum udplite_csum(struct sk_buff *skb)
+{
+	const struct udp_sock *up = udp_sk(skb->sk);
+	const int off = skb_transport_offset(skb);
+	int len = skb->len - off;
+
+	if ((up->pcflag & UDPLITE_SEND_CC) && up->pcslen < len) {
+		if (0 < up->pcslen)
+			len = up->pcslen;
+		udp_hdr(skb)->len = htons(up->pcslen);
+	}
+	skb->ip_summed = CHECKSUM_NONE;     /* no HW support for checksumming */
+
+	return skb_checksum(skb, off, len, 0);
+}
+
+extern void	udplite4_register(void);
+extern int 	udplite_get_port(struct sock *sk, unsigned short snum,
+			int (*scmp)(const struct sock *, const struct sock *));
+#endif	/* _UDPLITE_H */
diff --git a/include/net/wext.h b/include/net/wext.h
new file mode 100644
index 00000000..4f6e7423
--- /dev/null
+++ b/include/net/wext.h
@@ -0,0 +1,60 @@
+#ifndef __NET_WEXT_H
+#define __NET_WEXT_H
+
+#include <net/iw_handler.h>
+
+struct net;
+
+#ifdef CONFIG_WEXT_CORE
+extern int wext_handle_ioctl(struct net *net, struct ifreq *ifr, unsigned int cmd,
+			     void __user *arg);
+extern int compat_wext_handle_ioctl(struct net *net, unsigned int cmd,
+				    unsigned long arg);
+
+extern struct iw_statistics *get_wireless_stats(struct net_device *dev);
+extern int call_commit_handler(struct net_device *dev);
+#else
+static inline int wext_handle_ioctl(struct net *net, struct ifreq *ifr, unsigned int cmd,
+				    void __user *arg)
+{
+	return -EINVAL;
+}
+static inline int compat_wext_handle_ioctl(struct net *net, unsigned int cmd,
+					   unsigned long arg)
+{
+	return -EINVAL;
+}
+#endif
+
+#ifdef CONFIG_WEXT_PROC
+extern int wext_proc_init(struct net *net);
+extern void wext_proc_exit(struct net *net);
+#else
+static inline int wext_proc_init(struct net *net)
+{
+	return 0;
+}
+static inline void wext_proc_exit(struct net *net)
+{
+	return;
+}
+#endif
+
+#ifdef CONFIG_WEXT_PRIV
+int ioctl_private_call(struct net_device *dev, struct iwreq *iwr,
+		       unsigned int cmd, struct iw_request_info *info,
+		       iw_handler handler);
+int compat_private_call(struct net_device *dev, struct iwreq *iwr,
+			unsigned int cmd, struct iw_request_info *info,
+			iw_handler handler);
+int iw_handler_get_private(struct net_device *		dev,
+			   struct iw_request_info *	info,
+			   union iwreq_data *		wrqu,
+			   char *			extra);
+#else
+#define ioctl_private_call NULL
+#define compat_private_call NULL
+#endif
+
+
+#endif /* __NET_WEXT_H */
diff --git a/include/net/wimax.h b/include/net/wimax.h
new file mode 100644
index 00000000..322ff4fb
--- /dev/null
+++ b/include/net/wimax.h
@@ -0,0 +1,519 @@
+/*
+ * Linux WiMAX
+ * Kernel space API for accessing WiMAX devices
+ *
+ *
+ * Copyright (C) 2007-2008 Intel Corporation <linux-wimax@intel.com>
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * The WiMAX stack provides an API for controlling and managing the
+ * system's WiMAX devices. This API affects the control plane; the
+ * data plane is accessed via the network stack (netdev).
+ *
+ * Parts of the WiMAX stack API and notifications are exported to
+ * user space via Generic Netlink. In user space, libwimax (part of
+ * the wimax-tools package) provides a shim layer for accessing those
+ * calls.
+ *
+ * The API is standarized for all WiMAX devices and different drivers
+ * implement the backend support for it. However, device-specific
+ * messaging pipes are provided that can be used to issue commands and
+ * receive notifications in free form.
+ *
+ * Currently the messaging pipes are the only means of control as it
+ * is not known (due to the lack of more devices in the market) what
+ * will be a good abstraction layer. Expect this to change as more
+ * devices show in the market. This API is designed to be growable in
+ * order to address this problem.
+ *
+ * USAGE
+ *
+ * Embed a `struct wimax_dev` at the beginning of the the device's
+ * private structure, initialize and register it. For details, see
+ * `struct wimax_dev`s documentation.
+ *
+ * Once this is done, wimax-tools's libwimaxll can be used to
+ * communicate with the driver from user space. You user space
+ * application does not have to forcibily use libwimaxll and can talk
+ * the generic netlink protocol directly if desired.
+ *
+ * Remember this is a very low level API that will to provide all of
+ * WiMAX features. Other daemons and services running in user space
+ * are the expected clients of it. They offer a higher level API that
+ * applications should use (an example of this is the Intel's WiMAX
+ * Network Service for the i2400m).
+ *
+ * DESIGN
+ *
+ * Although not set on final stone, this very basic interface is
+ * mostly completed. Remember this is meant to grow as new common
+ * operations are decided upon. New operations will be added to the
+ * interface, intent being on keeping backwards compatibility as much
+ * as possible.
+ *
+ * This layer implements a set of calls to control a WiMAX device,
+ * exposing a frontend to the rest of the kernel and user space (via
+ * generic netlink) and a backend implementation in the driver through
+ * function pointers.
+ *
+ * WiMAX devices have a state, and a kernel-only API allows the
+ * drivers to manipulate that state. State transitions are atomic, and
+ * only some of them are allowed (see `enum wimax_st`).
+ *
+ * Most API calls will set the state automatically; in most cases
+ * drivers have to only report state changes due to external
+ * conditions.
+ *
+ * All API operations are 'atomic', serialized through a mutex in the
+ * `struct wimax_dev`.
+ *
+ * EXPORTING TO USER SPACE THROUGH GENERIC NETLINK
+ *
+ * The API is exported to user space using generic netlink (other
+ * methods can be added as needed).
+ *
+ * There is a Generic Netlink Family named "WiMAX", where interfaces
+ * supporting the WiMAX interface receive commands and broadcast their
+ * signals over a multicast group named "msg".
+ *
+ * Mapping to the source/destination interface is done by an interface
+ * index attribute.
+ *
+ * For user-to-kernel traffic (commands) we use a function call
+ * marshalling mechanism, where a message X with attributes A, B, C
+ * sent from user space to kernel space means executing the WiMAX API
+ * call wimax_X(A, B, C), sending the results back as a message.
+ *
+ * Kernel-to-user (notifications or signals) communication is sent
+ * over multicast groups. This allows to have multiple applications
+ * monitoring them.
+ *
+ * Each command/signal gets assigned it's own attribute policy. This
+ * way the validator will verify that all the attributes in there are
+ * only the ones that should be for each command/signal. Thing of an
+ * attribute mapping to a type+argumentname for each command/signal.
+ *
+ * If we had a single policy for *all* commands/signals, after running
+ * the validator we'd have to check "does this attribute belong in
+ * here"?  for each one. It can be done manually, but it's just easier
+ * to have the validator do that job with multiple policies. As well,
+ * it makes it easier to later expand each command/signal signature
+ * without affecting others and keeping the namespace more or less
+ * sane. Not that it is too complicated, but it makes it even easier.
+ *
+ * No state information is maintained in the kernel for each user
+ * space connection (the connection is stateless).
+ *
+ * TESTING FOR THE INTERFACE AND VERSIONING
+ *
+ * If network interface X is a WiMAX device, there will be a Generic
+ * Netlink family named "WiMAX X" and the device will present a
+ * "wimax" directory in it's network sysfs directory
+ * (/sys/class/net/DEVICE/wimax) [used by HAL].
+ *
+ * The inexistence of any of these means the device does not support
+ * this WiMAX API.
+ *
+ * By querying the generic netlink controller, versioning information
+ * and the multicast groups available can be found. Applications using
+ * the interface can either rely on that or use the generic netlink
+ * controller to figure out which generic netlink commands/signals are
+ * supported.
+ *
+ * NOTE: this versioning is a last resort to avoid hard
+ *    incompatibilities. It is the intention of the design of this
+ *    stack not to introduce backward incompatible changes.
+ *
+ * The version code has to fit in one byte (restrictions imposed by
+ * generic netlink); we use `version / 10` for the major version and
+ * `version % 10` for the minor. This gives 9 minors for each major
+ * and 25 majors.
+ *
+ * The version change protocol is as follow:
+ *
+ * - Major versions: needs to be increased if an existing message/API
+ *   call is changed or removed. Doesn't need to be changed if a new
+ *   message is added.
+ *
+ * - Minor version: needs to be increased if new messages/API calls are
+ *   being added or some other consideration that doesn't impact the
+ *   user-kernel interface too much (like some kind of bug fix) and
+ *   that is kind of left up in the air to common sense.
+ *
+ * User space code should not try to work if the major version it was
+ * compiled for differs from what the kernel offers. As well, if the
+ * minor version of the kernel interface is lower than the one user
+ * space is expecting (the one it was compiled for), the kernel
+ * might be missing API calls; user space shall be ready to handle
+ * said condition. Use the generic netlink controller operations to
+ * find which ones are supported and which not.
+ *
+ * libwimaxll:wimaxll_open() takes care of checking versions.
+ *
+ * THE OPERATIONS:
+ *
+ * Each operation is defined in its on file (drivers/net/wimax/op-*.c)
+ * for clarity. The parts needed for an operation are:
+ *
+ *  - a function pointer in `struct wimax_dev`: optional, as the
+ *    operation might be implemented by the stack and not by the
+ *    driver.
+ *
+ *    All function pointers are named wimax_dev->op_*(), and drivers
+ *    must implement them except where noted otherwise.
+ *
+ *  - When exported to user space, a `struct nla_policy` to define the
+ *    attributes of the generic netlink command and a `struct genl_ops`
+ *    to define the operation.
+ *
+ * All the declarations for the operation codes (WIMAX_GNL_OP_<NAME>)
+ * and generic netlink attributes (WIMAX_GNL_<NAME>_*) are declared in
+ * include/linux/wimax.h; this file is intended to be cloned by user
+ * space to gain access to those declarations.
+ *
+ * A few caveats to remember:
+ *
+ *  - Need to define attribute numbers starting in 1; otherwise it
+ *    fails.
+ *
+ *  - the `struct genl_family` requires a maximum attribute id; when
+ *    defining the `struct nla_policy` for each message, it has to have
+ *    an array size of WIMAX_GNL_ATTR_MAX+1.
+ *
+ * The op_*() function pointers will not be called if the wimax_dev is
+ * in a state <= %WIMAX_ST_UNINITIALIZED. The exception is:
+ *
+ * - op_reset: can be called at any time after wimax_dev_add() has
+ *   been called.
+ *
+ * THE PIPE INTERFACE:
+ *
+ * This interface is kept intentionally simple. The driver can send
+ * and receive free-form messages to/from user space through a
+ * pipe. See drivers/net/wimax/op-msg.c for details.
+ *
+ * The kernel-to-user messages are sent with
+ * wimax_msg(). user-to-kernel messages are delivered via
+ * wimax_dev->op_msg_from_user().
+ *
+ * RFKILL:
+ *
+ * RFKILL support is built into the wimax_dev layer; the driver just
+ * needs to call wimax_report_rfkill_{hw,sw}() to inform of changes in
+ * the hardware or software RF kill switches. When the stack wants to
+ * turn the radio off, it will call wimax_dev->op_rfkill_sw_toggle(),
+ * which the driver implements.
+ *
+ * User space can set the software RF Kill switch by calling
+ * wimax_rfkill().
+ *
+ * The code for now only supports devices that don't require polling;
+ * If the device needs to be polled, create a self-rearming delayed
+ * work struct for polling or look into adding polled support to the
+ * WiMAX stack.
+ *
+ * When initializing the hardware (_probe), after calling
+ * wimax_dev_add(), query the device for it's RF Kill switches status
+ * and feed it back to the WiMAX stack using
+ * wimax_report_rfkill_{hw,sw}(). If any switch is missing, always
+ * report it as ON.
+ *
+ * NOTE: the wimax stack uses an inverted terminology to that of the
+ * RFKILL subsystem:
+ *
+ *  - ON: radio is ON, RFKILL is DISABLED or OFF.
+ *  - OFF: radio is OFF, RFKILL is ENABLED or ON.
+ *
+ * MISCELLANEOUS OPS:
+ *
+ * wimax_reset() can be used to reset the device to power on state; by
+ * default it issues a warm reset that maintains the same device
+ * node. If that is not possible, it falls back to a cold reset
+ * (device reconnect). The driver implements the backend to this
+ * through wimax_dev->op_reset().
+ */
+
+#ifndef __NET__WIMAX_H__
+#define __NET__WIMAX_H__
+
+#include <linux/wimax.h>
+#include <net/genetlink.h>
+#include <linux/netdevice.h>
+
+struct net_device;
+struct genl_info;
+struct wimax_dev;
+
+/**
+ * struct wimax_dev - Generic WiMAX device
+ *
+ * @net_dev: [fill] Pointer to the &struct net_device this WiMAX
+ *     device implements.
+ *
+ * @op_msg_from_user: [fill] Driver-specific operation to
+ *     handle a raw message from user space to the driver. The
+ *     driver can send messages to user space using with
+ *     wimax_msg_to_user().
+ *
+ * @op_rfkill_sw_toggle: [fill] Driver-specific operation to act on
+ *     userspace (or any other agent) requesting the WiMAX device to
+ *     change the RF Kill software switch (WIMAX_RF_ON or
+ *     WIMAX_RF_OFF).
+ *     If such hardware support is not present, it is assumed the
+ *     radio cannot be switched off and it is always on (and the stack
+ *     will error out when trying to switch it off). In such case,
+ *     this function pointer can be left as NULL.
+ *
+ * @op_reset: [fill] Driver specific operation to reset the
+ *     device.
+ *     This operation should always attempt first a warm reset that
+ *     does not disconnect the device from the bus and return 0.
+ *     If that fails, it should resort to some sort of cold or bus
+ *     reset (even if it implies a bus disconnection and device
+ *     disappearance). In that case, -ENODEV should be returned to
+ *     indicate the device is gone.
+ *     This operation has to be synchronous, and return only when the
+ *     reset is complete. In case of having had to resort to bus/cold
+ *     reset implying a device disconnection, the call is allowed to
+ *     return inmediately.
+ *     NOTE: wimax_dev->mutex is NOT locked when this op is being
+ *     called; however, wimax_dev->mutex_reset IS locked to ensure
+ *     serialization of calls to wimax_reset().
+ *     See wimax_reset()'s documentation.
+ *
+ * @name: [fill] A way to identify this device. We need to register a
+ *     name with many subsystems (rfkill, workqueue creation, etc).
+ *     We can't use the network device name as that
+ *     might change and in some instances we don't know it yet (until
+ *     we don't call register_netdev()). So we generate an unique one
+ *     using the driver name and device bus id, place it here and use
+ *     it across the board. Recommended naming:
+ *     DRIVERNAME-BUSNAME:BUSID (dev->bus->name, dev->bus_id).
+ *
+ * @id_table_node: [private] link to the list of wimax devices kept by
+ *     id-table.c. Protected by it's own spinlock.
+ *
+ * @mutex: [private] Serializes all concurrent access and execution of
+ *     operations.
+ *
+ * @mutex_reset: [private] Serializes reset operations. Needs to be a
+ *     different mutex because as part of the reset operation, the
+ *     driver has to call back into the stack to do things such as
+ *     state change, that require wimax_dev->mutex.
+ *
+ * @state: [private] Current state of the WiMAX device.
+ *
+ * @rfkill: [private] integration into the RF-Kill infrastructure.
+ *
+ * @rf_sw: [private] State of the software radio switch (OFF/ON)
+ *
+ * @rf_hw: [private] State of the hardware radio switch (OFF/ON)
+ *
+ * @debugfs_dentry: [private] Used to hook up a debugfs entry. This
+ *     shows up in the debugfs root as wimax\:DEVICENAME.
+ *
+ * Description:
+ * This structure defines a common interface to access all WiMAX
+ * devices from different vendors and provides a common API as well as
+ * a free-form device-specific messaging channel.
+ *
+ * Usage:
+ *  1. Embed a &struct wimax_dev at *the beginning* the network
+ *     device structure so that netdev_priv() points to it.
+ *
+ *  2. memset() it to zero
+ *
+ *  3. Initialize with wimax_dev_init(). This will leave the WiMAX
+ *     device in the %__WIMAX_ST_NULL state.
+ *
+ *  4. Fill all the fields marked with [fill]; once called
+ *     wimax_dev_add(), those fields CANNOT be modified.
+ *
+ *  5. Call wimax_dev_add() *after* registering the network
+ *     device. This will leave the WiMAX device in the %WIMAX_ST_DOWN
+ *     state.
+ *     Protect the driver's net_device->open() against succeeding if
+ *     the wimax device state is lower than %WIMAX_ST_DOWN.
+ *
+ *  6. Select when the device is going to be turned on/initialized;
+ *     for example, it could be initialized on 'ifconfig up' (when the
+ *     netdev op 'open()' is called on the driver).
+ *
+ * When the device is initialized (at `ifconfig up` time, or right
+ * after calling wimax_dev_add() from _probe(), make sure the
+ * following steps are taken
+ *
+ *  a. Move the device to %WIMAX_ST_UNINITIALIZED. This is needed so
+ *     some API calls that shouldn't work until the device is ready
+ *     can be blocked.
+ *
+ *  b. Initialize the device. Make sure to turn the SW radio switch
+ *     off and move the device to state %WIMAX_ST_RADIO_OFF when
+ *     done. When just initialized, a device should be left in RADIO
+ *     OFF state until user space devices to turn it on.
+ *
+ *  c. Query the device for the state of the hardware rfkill switch
+ *     and call wimax_rfkill_report_hw() and wimax_rfkill_report_sw()
+ *     as needed. See below.
+ *
+ * wimax_dev_rm() undoes before unregistering the network device. Once
+ * wimax_dev_add() is called, the driver can get called on the
+ * wimax_dev->op_* function pointers
+ *
+ * CONCURRENCY:
+ *
+ * The stack provides a mutex for each device that will disallow API
+ * calls happening concurrently; thus, op calls into the driver
+ * through the wimax_dev->op*() function pointers will always be
+ * serialized and *never* concurrent.
+ *
+ * For locking, take wimax_dev->mutex is taken; (most) operations in
+ * the API have to check for wimax_dev_is_ready() to return 0 before
+ * continuing (this is done internally).
+ *
+ * REFERENCE COUNTING:
+ *
+ * The WiMAX device is reference counted by the associated network
+ * device. The only operation that can be used to reference the device
+ * is wimax_dev_get_by_genl_info(), and the reference it acquires has
+ * to be released with dev_put(wimax_dev->net_dev).
+ *
+ * RFKILL:
+ *
+ * At startup, both HW and SW radio switchess are assumed to be off.
+ *
+ * At initialization time [after calling wimax_dev_add()], have the
+ * driver query the device for the status of the software and hardware
+ * RF kill switches and call wimax_report_rfkill_hw() and
+ * wimax_rfkill_report_sw() to indicate their state. If any is
+ * missing, just call it to indicate it is ON (radio always on).
+ *
+ * Whenever the driver detects a change in the state of the RF kill
+ * switches, it should call wimax_report_rfkill_hw() or
+ * wimax_report_rfkill_sw() to report it to the stack.
+ */
+struct wimax_dev {
+	struct net_device *net_dev;
+	struct list_head id_table_node;
+	struct mutex mutex;		/* Protects all members and API calls */
+	struct mutex mutex_reset;
+	enum wimax_st state;
+
+	int (*op_msg_from_user)(struct wimax_dev *wimax_dev,
+				const char *,
+				const void *, size_t,
+				const struct genl_info *info);
+	int (*op_rfkill_sw_toggle)(struct wimax_dev *wimax_dev,
+				   enum wimax_rf_state);
+	int (*op_reset)(struct wimax_dev *wimax_dev);
+
+	struct rfkill *rfkill;
+	unsigned rf_hw;
+	unsigned rf_sw;
+	char name[32];
+
+	struct dentry *debugfs_dentry;
+};
+
+
+
+/*
+ * WiMAX stack public API for device drivers
+ * -----------------------------------------
+ *
+ * These functions are not exported to user space.
+ */
+extern void wimax_dev_init(struct wimax_dev *);
+extern int wimax_dev_add(struct wimax_dev *, struct net_device *);
+extern void wimax_dev_rm(struct wimax_dev *);
+
+static inline
+struct wimax_dev *net_dev_to_wimax(struct net_device *net_dev)
+{
+	return netdev_priv(net_dev);
+}
+
+static inline
+struct device *wimax_dev_to_dev(struct wimax_dev *wimax_dev)
+{
+	return wimax_dev->net_dev->dev.parent;
+}
+
+extern void wimax_state_change(struct wimax_dev *, enum wimax_st);
+extern enum wimax_st wimax_state_get(struct wimax_dev *);
+
+/*
+ * Radio Switch state reporting.
+ *
+ * enum wimax_rf_state is declared in linux/wimax.h so the exports
+ * to user space can use it.
+ */
+extern void wimax_report_rfkill_hw(struct wimax_dev *, enum wimax_rf_state);
+extern void wimax_report_rfkill_sw(struct wimax_dev *, enum wimax_rf_state);
+
+
+/*
+ * Free-form messaging to/from user space
+ *
+ * Sending a message:
+ *
+ *   wimax_msg(wimax_dev, pipe_name, buf, buf_size, GFP_KERNEL);
+ *
+ * Broken up:
+ *
+ *   skb = wimax_msg_alloc(wimax_dev, pipe_name, buf_size, GFP_KERNEL);
+ *   ...fill up skb...
+ *   wimax_msg_send(wimax_dev, pipe_name, skb);
+ *
+ * Be sure not to modify skb->data in the middle (ie: don't use
+ * skb_push()/skb_pull()/skb_reserve() on the skb).
+ *
+ * "pipe_name" is any string, than can be interpreted as the name of
+ * the pipe or destinatary; the interpretation of it is driver
+ * specific, so the recipient can multiplex it as wished. It can be
+ * NULL, it won't be used - an example is using a "diagnostics" tag to
+ * send diagnostics information that a device-specific diagnostics
+ * tool would be interested in.
+ */
+extern struct sk_buff *wimax_msg_alloc(struct wimax_dev *, const char *,
+				       const void *, size_t, gfp_t);
+extern int wimax_msg_send(struct wimax_dev *, struct sk_buff *);
+extern int wimax_msg(struct wimax_dev *, const char *,
+		     const void *, size_t, gfp_t);
+
+extern const void *wimax_msg_data_len(struct sk_buff *, size_t *);
+extern const void *wimax_msg_data(struct sk_buff *);
+extern ssize_t wimax_msg_len(struct sk_buff *);
+
+
+/*
+ * WiMAX stack user space API
+ * --------------------------
+ *
+ * This API is what gets exported to user space for general
+ * operations. As well, they can be called from within the kernel,
+ * (with a properly referenced `struct wimax_dev`).
+ *
+ * Properly referenced means: the 'struct net_device' that embeds the
+ * device's control structure and (as such) the 'struct wimax_dev' is
+ * referenced by the caller.
+ */
+extern int wimax_rfkill(struct wimax_dev *, enum wimax_rf_state);
+extern int wimax_reset(struct wimax_dev *);
+
+#endif /* #ifndef __NET__WIMAX_H__ */
diff --git a/include/net/wpan-phy.h b/include/net/wpan-phy.h
new file mode 100644
index 00000000..ff27f1b0
--- /dev/null
+++ b/include/net/wpan-phy.h
@@ -0,0 +1,82 @@
+/*
+ * Copyright (C) 2007, 2008, 2009 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ */
+
+#ifndef WPAN_PHY_H
+#define WPAN_PHY_H
+
+#include <linux/netdevice.h>
+#include <linux/mutex.h>
+#include <linux/bug.h>
+
+struct wpan_phy {
+	struct mutex pib_lock;
+
+	/*
+	 * This is a PIB according to 802.15.4-2006.
+	 * We do not provide timing-related variables, as they
+	 * aren't used outside of driver
+	 */
+	u8 current_channel;
+	u8 current_page;
+	u32 channels_supported[32];
+	u8 transmit_power;
+	u8 cca_mode;
+
+	struct device dev;
+	int idx;
+
+	struct net_device *(*add_iface)(struct wpan_phy *phy,
+			const char *name);
+	void (*del_iface)(struct wpan_phy *phy, struct net_device *dev);
+
+	char priv[0] __attribute__((__aligned__(NETDEV_ALIGN)));
+};
+
+#define to_phy(_dev)	container_of(_dev, struct wpan_phy, dev)
+
+struct wpan_phy *wpan_phy_alloc(size_t priv_size);
+static inline void wpan_phy_set_dev(struct wpan_phy *phy, struct device *dev)
+{
+	phy->dev.parent = dev;
+}
+int wpan_phy_register(struct wpan_phy *phy);
+void wpan_phy_unregister(struct wpan_phy *phy);
+void wpan_phy_free(struct wpan_phy *phy);
+/* Same semantics as for class_for_each_device */
+int wpan_phy_for_each(int (*fn)(struct wpan_phy *phy, void *data), void *data);
+
+static inline void *wpan_phy_priv(struct wpan_phy *phy)
+{
+	BUG_ON(!phy);
+	return &phy->priv;
+}
+
+struct wpan_phy *wpan_phy_find(const char *str);
+
+static inline void wpan_phy_put(struct wpan_phy *phy)
+{
+	put_device(&phy->dev);
+}
+
+static inline const char *wpan_phy_name(struct wpan_phy *phy)
+{
+	return dev_name(&phy->dev);
+}
+#endif
diff --git a/include/net/x25.h b/include/net/x25.h
new file mode 100644
index 00000000..a06119a0
--- /dev/null
+++ b/include/net/x25.h
@@ -0,0 +1,323 @@
+/*
+ *	Declarations of X.25 Packet Layer type objects.
+ *
+ * 	History
+ *	nov/17/96	Jonathan Naylor	  Initial version.		
+ *	mar/20/00	Daniela Squassoni Disabling/enabling of facilities 
+ *					  negotiation.
+ */
+
+#ifndef _X25_H
+#define _X25_H 
+#include <linux/x25.h>
+#include <linux/slab.h>
+#include <net/sock.h>
+
+#define	X25_ADDR_LEN			16
+
+#define	X25_MAX_L2_LEN			18	/* 802.2 LLC */
+
+#define	X25_STD_MIN_LEN			3
+#define	X25_EXT_MIN_LEN			4
+
+#define	X25_GFI_SEQ_MASK		0x30
+#define	X25_GFI_STDSEQ			0x10
+#define	X25_GFI_EXTSEQ			0x20
+
+#define	X25_Q_BIT			0x80
+#define	X25_D_BIT			0x40
+#define	X25_STD_M_BIT			0x10
+#define	X25_EXT_M_BIT			0x01
+
+#define	X25_CALL_REQUEST		0x0B
+#define	X25_CALL_ACCEPTED		0x0F
+#define	X25_CLEAR_REQUEST		0x13
+#define	X25_CLEAR_CONFIRMATION		0x17
+#define	X25_DATA			0x00
+#define	X25_INTERRUPT			0x23
+#define	X25_INTERRUPT_CONFIRMATION	0x27
+#define	X25_RR				0x01
+#define	X25_RNR				0x05
+#define	X25_REJ				0x09
+#define	X25_RESET_REQUEST		0x1B
+#define	X25_RESET_CONFIRMATION		0x1F
+#define	X25_REGISTRATION_REQUEST	0xF3
+#define	X25_REGISTRATION_CONFIRMATION	0xF7
+#define	X25_RESTART_REQUEST		0xFB
+#define	X25_RESTART_CONFIRMATION	0xFF
+#define	X25_DIAGNOSTIC			0xF1
+#define	X25_ILLEGAL			0xFD
+
+/* Define the various conditions that may exist */
+
+#define	X25_COND_ACK_PENDING	0x01
+#define	X25_COND_OWN_RX_BUSY	0x02
+#define	X25_COND_PEER_RX_BUSY	0x04
+
+/* Define Link State constants. */
+enum {
+	X25_STATE_0,		/* Ready */
+	X25_STATE_1,		/* Awaiting Call Accepted */
+	X25_STATE_2,		/* Awaiting Clear Confirmation */
+	X25_STATE_3,		/* Data Transfer */
+	X25_STATE_4		/* Awaiting Reset Confirmation */
+};
+
+enum {
+	X25_LINK_STATE_0,
+	X25_LINK_STATE_1,
+	X25_LINK_STATE_2,
+	X25_LINK_STATE_3
+};
+
+#define X25_DEFAULT_T20		(180 * HZ)		/* Default T20 value */
+#define X25_DEFAULT_T21		(200 * HZ)		/* Default T21 value */
+#define X25_DEFAULT_T22		(180 * HZ)		/* Default T22 value */
+#define	X25_DEFAULT_T23		(180 * HZ)		/* Default T23 value */
+#define	X25_DEFAULT_T2		(3   * HZ)		/* Default ack holdback value */
+
+#define	X25_DEFAULT_WINDOW_SIZE	2			/* Default Window Size	*/
+#define	X25_DEFAULT_PACKET_SIZE	X25_PS128		/* Default Packet Size */
+#define	X25_DEFAULT_THROUGHPUT	0x0A			/* Deafult Throughput */
+#define	X25_DEFAULT_REVERSE	0x00			/* Default Reverse Charging */
+
+#define X25_SMODULUS 		8
+#define	X25_EMODULUS		128
+
+/*
+ *	X.25 Facilities constants.
+ */
+
+#define	X25_FAC_CLASS_MASK	0xC0
+
+#define	X25_FAC_CLASS_A		0x00
+#define	X25_FAC_CLASS_B		0x40
+#define	X25_FAC_CLASS_C		0x80
+#define	X25_FAC_CLASS_D		0xC0
+
+#define	X25_FAC_REVERSE		0x01			/* also fast select */
+#define	X25_FAC_THROUGHPUT	0x02
+#define	X25_FAC_PACKET_SIZE	0x42
+#define	X25_FAC_WINDOW_SIZE	0x43
+
+#define X25_MAX_FAC_LEN 	60
+#define	X25_MAX_CUD_LEN		128
+
+#define X25_FAC_CALLING_AE 	0xCB
+#define X25_FAC_CALLED_AE 	0xC9
+
+#define X25_MARKER 		0x00
+#define X25_DTE_SERVICES 	0x0F
+#define X25_MAX_AE_LEN 		40			/* Max num of semi-octets in AE - OSI Nw */
+#define X25_MAX_DTE_FACIL_LEN	21			/* Max length of DTE facility params */
+
+/* Bitset in x25_sock->flags for misc flags */
+#define X25_Q_BIT_FLAG		0
+#define X25_INTERRUPT_FLAG	1
+#define X25_ACCPT_APPRV_FLAG	2
+
+/**
+ *	struct x25_route - x25 routing entry
+ *	@node - entry in x25_list_lock
+ *	@address - Start of address range
+ *	@sigdigits - Number of sig digits
+ *	@dev - More than one for MLP
+ *	@refcnt - reference counter
+ */
+struct x25_route {
+	struct list_head	node;		
+	struct x25_address	address;
+	unsigned int		sigdigits;
+	struct net_device	*dev;
+	atomic_t		refcnt;
+};
+
+struct x25_neigh {
+	struct list_head	node;
+	struct net_device	*dev;
+	unsigned int		state;
+	unsigned int		extended;
+	struct sk_buff_head	queue;
+	unsigned long		t20;
+	struct timer_list	t20timer;
+	unsigned long		global_facil_mask;
+	atomic_t		refcnt;
+};
+
+struct x25_sock {
+	struct sock		sk;
+	struct x25_address	source_addr, dest_addr;
+	struct x25_neigh	*neighbour;
+	unsigned int		lci, cudmatchlength;
+	unsigned char		state, condition;
+	unsigned short		vs, vr, va, vl;
+	unsigned long		t2, t21, t22, t23;
+	unsigned short		fraglen;
+	unsigned long		flags;
+	struct sk_buff_head	ack_queue;
+	struct sk_buff_head	fragment_queue;
+	struct sk_buff_head	interrupt_in_queue;
+	struct sk_buff_head	interrupt_out_queue;
+	struct timer_list	timer;
+	struct x25_causediag	causediag;
+	struct x25_facilities	facilities;
+	struct x25_dte_facilities dte_facilities;
+	struct x25_calluserdata	calluserdata;
+	unsigned long 		vc_facil_mask;	/* inc_call facilities mask */
+};
+
+struct x25_forward {
+	struct list_head	node;
+	unsigned int		lci;
+	struct net_device	*dev1;
+	struct net_device	*dev2;
+	atomic_t		refcnt;
+};
+
+static inline struct x25_sock *x25_sk(const struct sock *sk)
+{
+	return (struct x25_sock *)sk;
+}
+
+/* af_x25.c */
+extern int  sysctl_x25_restart_request_timeout;
+extern int  sysctl_x25_call_request_timeout;
+extern int  sysctl_x25_reset_request_timeout;
+extern int  sysctl_x25_clear_request_timeout;
+extern int  sysctl_x25_ack_holdback_timeout;
+extern int  sysctl_x25_forward;
+
+extern int x25_parse_address_block(struct sk_buff *skb,
+		struct x25_address *called_addr,
+		struct x25_address *calling_addr);
+
+extern int  x25_addr_ntoa(unsigned char *, struct x25_address *,
+			  struct x25_address *);
+extern int  x25_addr_aton(unsigned char *, struct x25_address *,
+			  struct x25_address *);
+extern struct sock *x25_find_socket(unsigned int, struct x25_neigh *);
+extern void x25_destroy_socket_from_timer(struct sock *);
+extern int  x25_rx_call_request(struct sk_buff *, struct x25_neigh *, unsigned int);
+extern void x25_kill_by_neigh(struct x25_neigh *);
+
+/* x25_dev.c */
+extern void x25_send_frame(struct sk_buff *, struct x25_neigh *);
+extern int  x25_lapb_receive_frame(struct sk_buff *, struct net_device *, struct packet_type *, struct net_device *);
+extern void x25_establish_link(struct x25_neigh *);
+extern void x25_terminate_link(struct x25_neigh *);
+
+/* x25_facilities.c */
+extern int x25_parse_facilities(struct sk_buff *, struct x25_facilities *,
+				struct x25_dte_facilities *, unsigned long *);
+extern int x25_create_facilities(unsigned char *, struct x25_facilities *,
+				struct x25_dte_facilities *, unsigned long);
+extern int x25_negotiate_facilities(struct sk_buff *, struct sock *,
+				struct x25_facilities *,
+				struct x25_dte_facilities *);
+extern void x25_limit_facilities(struct x25_facilities *, struct x25_neigh *);
+
+/* x25_forward.c */
+extern void x25_clear_forward_by_lci(unsigned int lci);
+extern void x25_clear_forward_by_dev(struct net_device *);
+extern int x25_forward_data(int, struct x25_neigh *, struct sk_buff *);
+extern int x25_forward_call(struct x25_address *, struct x25_neigh *,
+				struct sk_buff *, int);
+
+/* x25_in.c */
+extern int  x25_process_rx_frame(struct sock *, struct sk_buff *);
+extern int  x25_backlog_rcv(struct sock *, struct sk_buff *);
+
+/* x25_link.c */
+extern void x25_link_control(struct sk_buff *, struct x25_neigh *, unsigned short);
+extern void x25_link_device_up(struct net_device *);
+extern void x25_link_device_down(struct net_device *);
+extern void x25_link_established(struct x25_neigh *);
+extern void x25_link_terminated(struct x25_neigh *);
+extern void x25_transmit_clear_request(struct x25_neigh *, unsigned int, unsigned char);
+extern void x25_transmit_link(struct sk_buff *, struct x25_neigh *);
+extern int  x25_subscr_ioctl(unsigned int, void __user *);
+extern struct x25_neigh *x25_get_neigh(struct net_device *);
+extern void x25_link_free(void);
+
+/* x25_neigh.c */
+static __inline__ void x25_neigh_hold(struct x25_neigh *nb)
+{
+	atomic_inc(&nb->refcnt);
+}
+
+static __inline__ void x25_neigh_put(struct x25_neigh *nb)
+{
+	if (atomic_dec_and_test(&nb->refcnt))
+		kfree(nb);
+}
+
+/* x25_out.c */
+extern  int x25_output(struct sock *, struct sk_buff *);
+extern void x25_kick(struct sock *);
+extern void x25_enquiry_response(struct sock *);
+
+/* x25_route.c */
+extern struct x25_route *x25_get_route(struct x25_address *addr);
+extern struct net_device *x25_dev_get(char *);
+extern void x25_route_device_down(struct net_device *dev);
+extern int  x25_route_ioctl(unsigned int, void __user *);
+extern void x25_route_free(void);
+
+static __inline__ void x25_route_hold(struct x25_route *rt)
+{
+	atomic_inc(&rt->refcnt);
+}
+
+static __inline__ void x25_route_put(struct x25_route *rt)
+{
+	if (atomic_dec_and_test(&rt->refcnt))
+		kfree(rt);
+}
+
+/* x25_subr.c */
+extern void x25_clear_queues(struct sock *);
+extern void x25_frames_acked(struct sock *, unsigned short);
+extern void x25_requeue_frames(struct sock *);
+extern int  x25_validate_nr(struct sock *, unsigned short);
+extern void x25_write_internal(struct sock *, int);
+extern int  x25_decode(struct sock *, struct sk_buff *, int *, int *, int *, int *, int *);
+extern void x25_disconnect(struct sock *, int, unsigned char, unsigned char);
+
+/* x25_timer.c */
+extern void x25_init_timers(struct sock *sk);
+extern void x25_start_heartbeat(struct sock *);
+extern void x25_start_t2timer(struct sock *);
+extern void x25_start_t21timer(struct sock *);
+extern void x25_start_t22timer(struct sock *);
+extern void x25_start_t23timer(struct sock *);
+extern void x25_stop_heartbeat(struct sock *);
+extern void x25_stop_timer(struct sock *);
+extern unsigned long x25_display_timer(struct sock *);
+extern void x25_check_rbuf(struct sock *);
+
+/* sysctl_net_x25.c */
+#ifdef CONFIG_SYSCTL
+extern void x25_register_sysctl(void);
+extern void x25_unregister_sysctl(void);
+#else
+static inline void x25_register_sysctl(void) {};
+static inline void x25_unregister_sysctl(void) {};
+#endif /* CONFIG_SYSCTL */
+
+struct x25_skb_cb {
+	unsigned flags;
+};
+#define X25_SKB_CB(s) ((struct x25_skb_cb *) ((s)->cb))
+
+extern struct hlist_head x25_list;
+extern rwlock_t x25_list_lock;
+extern struct list_head x25_route_list;
+extern rwlock_t x25_route_list_lock;
+extern struct list_head x25_forward_list;
+extern rwlock_t x25_forward_list_lock;
+extern struct list_head x25_neigh_list;
+extern rwlock_t x25_neigh_list_lock;
+
+extern int x25_proc_init(void);
+extern void x25_proc_exit(void);
+#endif
diff --git a/include/net/x25device.h b/include/net/x25device.h
new file mode 100644
index 00000000..1fa08b49
--- /dev/null
+++ b/include/net/x25device.h
@@ -0,0 +1,17 @@
+#ifndef _X25DEVICE_H
+#define _X25DEVICE_H
+
+#include <linux/if_ether.h>
+#include <linux/if_packet.h>
+#include <linux/if_x25.h>
+#include <linux/skbuff.h>
+
+static inline __be16 x25_type_trans(struct sk_buff *skb, struct net_device *dev)
+{
+	skb->dev = dev;
+	skb_reset_mac_header(skb);
+	skb->pkt_type = PACKET_HOST;
+	
+	return htons(ETH_P_X25);
+}
+#endif
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
new file mode 100644
index 00000000..96239e78
--- /dev/null
+++ b/include/net/xfrm.h
@@ -0,0 +1,1693 @@
+#ifndef _NET_XFRM_H
+#define _NET_XFRM_H
+
+#include <linux/compiler.h>
+#include <linux/xfrm.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/skbuff.h>
+#include <linux/socket.h>
+#include <linux/pfkeyv2.h>
+#include <linux/ipsec.h>
+#include <linux/in6.h>
+#include <linux/mutex.h>
+#include <linux/audit.h>
+#include <linux/slab.h>
+
+#include <net/sock.h>
+#include <net/dst.h>
+#include <net/ip.h>
+#include <net/route.h>
+#include <net/ipv6.h>
+#include <net/ip6_fib.h>
+#include <net/flow.h>
+
+#include <linux/interrupt.h>
+
+#ifdef CONFIG_XFRM_STATISTICS
+#include <net/snmp.h>
+#endif
+
+#define XFRM_PROTO_ESP		50
+#define XFRM_PROTO_AH		51
+#define XFRM_PROTO_COMP		108
+#define XFRM_PROTO_IPIP		4
+#define XFRM_PROTO_IPV6		41
+#define XFRM_PROTO_ROUTING	IPPROTO_ROUTING
+#define XFRM_PROTO_DSTOPTS	IPPROTO_DSTOPTS
+
+#define XFRM_ALIGN4(len)	(((len) + 3) & ~3)
+#define XFRM_ALIGN8(len)	(((len) + 7) & ~7)
+#define MODULE_ALIAS_XFRM_MODE(family, encap) \
+	MODULE_ALIAS("xfrm-mode-" __stringify(family) "-" __stringify(encap))
+#define MODULE_ALIAS_XFRM_TYPE(family, proto) \
+	MODULE_ALIAS("xfrm-type-" __stringify(family) "-" __stringify(proto))
+
+#ifdef CONFIG_XFRM_STATISTICS
+#define XFRM_INC_STATS(net, field)	SNMP_INC_STATS((net)->mib.xfrm_statistics, field)
+#define XFRM_INC_STATS_BH(net, field)	SNMP_INC_STATS_BH((net)->mib.xfrm_statistics, field)
+#define XFRM_INC_STATS_USER(net, field)	SNMP_INC_STATS_USER((net)-mib.xfrm_statistics, field)
+#else
+#define XFRM_INC_STATS(net, field)	((void)(net))
+#define XFRM_INC_STATS_BH(net, field)	((void)(net))
+#define XFRM_INC_STATS_USER(net, field)	((void)(net))
+#endif
+
+extern struct mutex xfrm_cfg_mutex;
+
+/* Organization of SPD aka "XFRM rules"
+   ------------------------------------
+
+   Basic objects:
+   - policy rule, struct xfrm_policy (=SPD entry)
+   - bundle of transformations, struct dst_entry == struct xfrm_dst (=SA bundle)
+   - instance of a transformer, struct xfrm_state (=SA)
+   - template to clone xfrm_state, struct xfrm_tmpl
+
+   SPD is plain linear list of xfrm_policy rules, ordered by priority.
+   (To be compatible with existing pfkeyv2 implementations,
+   many rules with priority of 0x7fffffff are allowed to exist and
+   such rules are ordered in an unpredictable way, thanks to bsd folks.)
+
+   Lookup is plain linear search until the first match with selector.
+
+   If "action" is "block", then we prohibit the flow, otherwise:
+   if "xfrms_nr" is zero, the flow passes untransformed. Otherwise,
+   policy entry has list of up to XFRM_MAX_DEPTH transformations,
+   described by templates xfrm_tmpl. Each template is resolved
+   to a complete xfrm_state (see below) and we pack bundle of transformations
+   to a dst_entry returned to requestor.
+
+   dst -. xfrm  .-> xfrm_state #1
+    |---. child .-> dst -. xfrm .-> xfrm_state #2
+                     |---. child .-> dst -. xfrm .-> xfrm_state #3
+                                      |---. child .-> NULL
+
+   Bundles are cached at xrfm_policy struct (field ->bundles).
+
+
+   Resolution of xrfm_tmpl
+   -----------------------
+   Template contains:
+   1. ->mode		Mode: transport or tunnel
+   2. ->id.proto	Protocol: AH/ESP/IPCOMP
+   3. ->id.daddr	Remote tunnel endpoint, ignored for transport mode.
+      Q: allow to resolve security gateway?
+   4. ->id.spi          If not zero, static SPI.
+   5. ->saddr		Local tunnel endpoint, ignored for transport mode.
+   6. ->algos		List of allowed algos. Plain bitmask now.
+      Q: ealgos, aalgos, calgos. What a mess...
+   7. ->share		Sharing mode.
+      Q: how to implement private sharing mode? To add struct sock* to
+      flow id?
+
+   Having this template we search through SAD searching for entries
+   with appropriate mode/proto/algo, permitted by selector.
+   If no appropriate entry found, it is requested from key manager.
+
+   PROBLEMS:
+   Q: How to find all the bundles referring to a physical path for
+      PMTU discovery? Seems, dst should contain list of all parents...
+      and enter to infinite locking hierarchy disaster.
+      No! It is easier, we will not search for them, let them find us.
+      We add genid to each dst plus pointer to genid of raw IP route,
+      pmtu disc will update pmtu on raw IP route and increase its genid.
+      dst_check() will see this for top level and trigger resyncing
+      metrics. Plus, it will be made via sk->sk_dst_cache. Solved.
+ */
+
+struct xfrm_state_walk {
+	struct list_head	all;
+	u8			state;
+	union {
+		u8		dying;
+		u8		proto;
+	};
+	u32			seq;
+};
+
+/* Full description of state of transformer. */
+struct xfrm_state {
+#ifdef CONFIG_NET_NS
+	struct net		*xs_net;
+#endif
+	union {
+		struct hlist_node	gclist;
+		struct hlist_node	bydst;
+	};
+	struct hlist_node	bysrc;
+	struct hlist_node	byspi;
+
+	atomic_t		refcnt;
+	spinlock_t		lock;
+
+	struct xfrm_id		id;
+	struct xfrm_selector	sel;
+	struct xfrm_mark	mark;
+	u32			tfcpad;
+
+	u32			genid;
+
+	/* Key manager bits */
+	struct xfrm_state_walk	km;
+
+	/* Parameters of this state. */
+	struct {
+		u32		reqid;
+		u8		mode;
+		u8		replay_window;
+		u8		aalgo, ealgo, calgo;
+		u8		flags;
+		u16		family;
+		xfrm_address_t	saddr;
+		int		header_len;
+		int		trailer_len;
+	} props;
+
+	struct xfrm_lifetime_cfg lft;
+
+	/* Data for transformer */
+	struct xfrm_algo_auth	*aalg;
+	struct xfrm_algo	*ealg;
+	struct xfrm_algo	*calg;
+	struct xfrm_algo_aead	*aead;
+
+	/* Data for encapsulator */
+	struct xfrm_encap_tmpl	*encap;
+
+	/* Data for care-of address */
+	xfrm_address_t	*coaddr;
+
+	/* IPComp needs an IPIP tunnel for handling uncompressed packets */
+	struct xfrm_state	*tunnel;
+
+	/* If a tunnel, number of users + 1 */
+	atomic_t		tunnel_users;
+
+	/* State for replay detection */
+	struct xfrm_replay_state replay;
+	struct xfrm_replay_state_esn *replay_esn;
+
+	/* Replay detection state at the time we sent the last notification */
+	struct xfrm_replay_state preplay;
+	struct xfrm_replay_state_esn *preplay_esn;
+
+	/* The functions for replay detection. */
+	struct xfrm_replay	*repl;
+
+	/* internal flag that only holds state for delayed aevent at the
+	 * moment
+	*/
+	u32			xflags;
+
+	/* Replay detection notification settings */
+	u32			replay_maxage;
+	u32			replay_maxdiff;
+
+	/* Replay detection notification timer */
+	struct timer_list	rtimer;
+
+	/* Statistics */
+	struct xfrm_stats	stats;
+
+	struct xfrm_lifetime_cur curlft;
+	struct tasklet_hrtimer	mtimer;
+
+	/* Last used time */
+	unsigned long		lastused;
+
+	/* Reference to data common to all the instances of this
+	 * transformer. */
+	const struct xfrm_type	*type;
+	struct xfrm_mode	*inner_mode;
+	struct xfrm_mode	*inner_mode_iaf;
+	struct xfrm_mode	*outer_mode;
+
+	/* Security context */
+	struct xfrm_sec_ctx	*security;
+
+	/* Private data of this transformer, format is opaque,
+	 * interpreted by xfrm_type methods. */
+	void			*data;
+};
+
+static inline struct net *xs_net(struct xfrm_state *x)
+{
+	return read_pnet(&x->xs_net);
+}
+
+/* xflags - make enum if more show up */
+#define XFRM_TIME_DEFER	1
+
+enum {
+	XFRM_STATE_VOID,
+	XFRM_STATE_ACQ,
+	XFRM_STATE_VALID,
+	XFRM_STATE_ERROR,
+	XFRM_STATE_EXPIRED,
+	XFRM_STATE_DEAD
+};
+
+/* callback structure passed from either netlink or pfkey */
+struct km_event {
+	union {
+		u32 hard;
+		u32 proto;
+		u32 byid;
+		u32 aevent;
+		u32 type;
+	} data;
+
+	u32	seq;
+	u32	pid;
+	u32	event;
+	struct net *net;
+};
+
+struct xfrm_replay {
+	void	(*advance)(struct xfrm_state *x, __be32 net_seq);
+	int	(*check)(struct xfrm_state *x,
+			 struct sk_buff *skb,
+			 __be32 net_seq);
+	void	(*notify)(struct xfrm_state *x, int event);
+	int	(*overflow)(struct xfrm_state *x, struct sk_buff *skb);
+};
+
+struct net_device;
+struct xfrm_type;
+struct xfrm_dst;
+struct xfrm_policy_afinfo {
+	unsigned short		family;
+	struct dst_ops		*dst_ops;
+	void			(*garbage_collect)(struct net *net);
+	struct dst_entry	*(*dst_lookup)(struct net *net, int tos,
+					       const xfrm_address_t *saddr,
+					       const xfrm_address_t *daddr);
+	int			(*get_saddr)(struct net *net, xfrm_address_t *saddr, xfrm_address_t *daddr);
+	void			(*decode_session)(struct sk_buff *skb,
+						  struct flowi *fl,
+						  int reverse);
+	int			(*get_tos)(const struct flowi *fl);
+	int			(*init_path)(struct xfrm_dst *path,
+					     struct dst_entry *dst,
+					     int nfheader_len);
+	int			(*fill_dst)(struct xfrm_dst *xdst,
+					    struct net_device *dev,
+					    const struct flowi *fl);
+	struct dst_entry	*(*blackhole_route)(struct net *net, struct dst_entry *orig);
+};
+
+extern int xfrm_policy_register_afinfo(struct xfrm_policy_afinfo *afinfo);
+extern int xfrm_policy_unregister_afinfo(struct xfrm_policy_afinfo *afinfo);
+extern void km_policy_notify(struct xfrm_policy *xp, int dir, const struct km_event *c);
+extern void km_state_notify(struct xfrm_state *x, const struct km_event *c);
+
+struct xfrm_tmpl;
+extern int km_query(struct xfrm_state *x, struct xfrm_tmpl *t, struct xfrm_policy *pol);
+extern void km_state_expired(struct xfrm_state *x, int hard, u32 pid);
+extern int __xfrm_state_delete(struct xfrm_state *x);
+
+struct xfrm_state_afinfo {
+	unsigned int		family;
+	unsigned int		proto;
+	__be16			eth_proto;
+	struct module		*owner;
+	const struct xfrm_type	*type_map[IPPROTO_MAX];
+	struct xfrm_mode	*mode_map[XFRM_MODE_MAX];
+	int			(*init_flags)(struct xfrm_state *x);
+	void			(*init_tempsel)(struct xfrm_selector *sel,
+						const struct flowi *fl);
+	void			(*init_temprop)(struct xfrm_state *x,
+						const struct xfrm_tmpl *tmpl,
+						const xfrm_address_t *daddr,
+						const xfrm_address_t *saddr);
+	int			(*tmpl_sort)(struct xfrm_tmpl **dst, struct xfrm_tmpl **src, int n);
+	int			(*state_sort)(struct xfrm_state **dst, struct xfrm_state **src, int n);
+	int			(*output)(struct sk_buff *skb);
+	int			(*output_finish)(struct sk_buff *skb);
+	int			(*extract_input)(struct xfrm_state *x,
+						 struct sk_buff *skb);
+	int			(*extract_output)(struct xfrm_state *x,
+						  struct sk_buff *skb);
+	int			(*transport_finish)(struct sk_buff *skb,
+						    int async);
+};
+
+extern int xfrm_state_register_afinfo(struct xfrm_state_afinfo *afinfo);
+extern int xfrm_state_unregister_afinfo(struct xfrm_state_afinfo *afinfo);
+
+extern void xfrm_state_delete_tunnel(struct xfrm_state *x);
+
+struct xfrm_type {
+	char			*description;
+	struct module		*owner;
+	u8			proto;
+	u8			flags;
+#define XFRM_TYPE_NON_FRAGMENT	1
+#define XFRM_TYPE_REPLAY_PROT	2
+#define XFRM_TYPE_LOCAL_COADDR	4
+#define XFRM_TYPE_REMOTE_COADDR	8
+
+	int			(*init_state)(struct xfrm_state *x);
+	void			(*destructor)(struct xfrm_state *);
+	int			(*input)(struct xfrm_state *, struct sk_buff *skb);
+	int			(*output)(struct xfrm_state *, struct sk_buff *pskb);
+	int			(*reject)(struct xfrm_state *, struct sk_buff *,
+					  const struct flowi *);
+	int			(*hdr_offset)(struct xfrm_state *, struct sk_buff *, u8 **);
+	/* Estimate maximal size of result of transformation of a dgram */
+	u32			(*get_mtu)(struct xfrm_state *, int size);
+};
+
+extern int xfrm_register_type(const struct xfrm_type *type, unsigned short family);
+extern int xfrm_unregister_type(const struct xfrm_type *type, unsigned short family);
+
+struct xfrm_mode {
+	/*
+	 * Remove encapsulation header.
+	 *
+	 * The IP header will be moved over the top of the encapsulation
+	 * header.
+	 *
+	 * On entry, the transport header shall point to where the IP header
+	 * should be and the network header shall be set to where the IP
+	 * header currently is.  skb->data shall point to the start of the
+	 * payload.
+	 */
+	int (*input2)(struct xfrm_state *x, struct sk_buff *skb);
+
+	/*
+	 * This is the actual input entry point.
+	 *
+	 * For transport mode and equivalent this would be identical to
+	 * input2 (which does not need to be set).  While tunnel mode
+	 * and equivalent would set this to the tunnel encapsulation function
+	 * xfrm4_prepare_input that would in turn call input2.
+	 */
+	int (*input)(struct xfrm_state *x, struct sk_buff *skb);
+
+	/*
+	 * Add encapsulation header.
+	 *
+	 * On exit, the transport header will be set to the start of the
+	 * encapsulation header to be filled in by x->type->output and
+	 * the mac header will be set to the nextheader (protocol for
+	 * IPv4) field of the extension header directly preceding the
+	 * encapsulation header, or in its absence, that of the top IP
+	 * header.  The value of the network header will always point
+	 * to the top IP header while skb->data will point to the payload.
+	 */
+	int (*output2)(struct xfrm_state *x,struct sk_buff *skb);
+
+	/*
+	 * This is the actual output entry point.
+	 *
+	 * For transport mode and equivalent this would be identical to
+	 * output2 (which does not need to be set).  While tunnel mode
+	 * and equivalent would set this to a tunnel encapsulation function
+	 * (xfrm4_prepare_output or xfrm6_prepare_output) that would in turn
+	 * call output2.
+	 */
+	int (*output)(struct xfrm_state *x, struct sk_buff *skb);
+
+	struct xfrm_state_afinfo *afinfo;
+	struct module *owner;
+	unsigned int encap;
+	int flags;
+};
+
+/* Flags for xfrm_mode. */
+enum {
+	XFRM_MODE_FLAG_TUNNEL = 1,
+};
+
+extern int xfrm_register_mode(struct xfrm_mode *mode, int family);
+extern int xfrm_unregister_mode(struct xfrm_mode *mode, int family);
+
+static inline int xfrm_af2proto(unsigned int family)
+{
+	switch(family) {
+	case AF_INET:
+		return IPPROTO_IPIP;
+	case AF_INET6:
+		return IPPROTO_IPV6;
+	default:
+		return 0;
+	}
+}
+
+static inline struct xfrm_mode *xfrm_ip2inner_mode(struct xfrm_state *x, int ipproto)
+{
+	if ((ipproto == IPPROTO_IPIP && x->props.family == AF_INET) ||
+	    (ipproto == IPPROTO_IPV6 && x->props.family == AF_INET6))
+		return x->inner_mode;
+	else
+		return x->inner_mode_iaf;
+}
+
+struct xfrm_tmpl {
+/* id in template is interpreted as:
+ * daddr - destination of tunnel, may be zero for transport mode.
+ * spi   - zero to acquire spi. Not zero if spi is static, then
+ *	   daddr must be fixed too.
+ * proto - AH/ESP/IPCOMP
+ */
+	struct xfrm_id		id;
+
+/* Source address of tunnel. Ignored, if it is not a tunnel. */
+	xfrm_address_t		saddr;
+
+	unsigned short		encap_family;
+
+	u32			reqid;
+
+/* Mode: transport, tunnel etc. */
+	u8			mode;
+
+/* Sharing mode: unique, this session only, this user only etc. */
+	u8			share;
+
+/* May skip this transfomration if no SA is found */
+	u8			optional;
+
+/* Skip aalgos/ealgos/calgos checks. */
+	u8			allalgs;
+
+/* Bit mask of algos allowed for acquisition */
+	u32			aalgos;
+	u32			ealgos;
+	u32			calgos;
+};
+
+#define XFRM_MAX_DEPTH		6
+
+struct xfrm_policy_walk_entry {
+	struct list_head	all;
+	u8			dead;
+};
+
+struct xfrm_policy_walk {
+	struct xfrm_policy_walk_entry walk;
+	u8 type;
+	u32 seq;
+};
+
+struct xfrm_policy {
+#ifdef CONFIG_NET_NS
+	struct net		*xp_net;
+#endif
+	struct hlist_node	bydst;
+	struct hlist_node	byidx;
+
+	/* This lock only affects elements except for entry. */
+	rwlock_t		lock;
+	atomic_t		refcnt;
+	struct timer_list	timer;
+
+	struct flow_cache_object flo;
+	atomic_t		genid;
+	u32			priority;
+	u32			index;
+	struct xfrm_mark	mark;
+	struct xfrm_selector	selector;
+	struct xfrm_lifetime_cfg lft;
+	struct xfrm_lifetime_cur curlft;
+	struct xfrm_policy_walk_entry walk;
+	u8			type;
+	u8			action;
+	u8			flags;
+	u8			xfrm_nr;
+	u16			family;
+	struct xfrm_sec_ctx	*security;
+	struct xfrm_tmpl       	xfrm_vec[XFRM_MAX_DEPTH];
+};
+
+static inline struct net *xp_net(const struct xfrm_policy *xp)
+{
+	return read_pnet(&xp->xp_net);
+}
+
+struct xfrm_kmaddress {
+	xfrm_address_t          local;
+	xfrm_address_t          remote;
+	u32			reserved;
+	u16			family;
+};
+
+struct xfrm_migrate {
+	xfrm_address_t		old_daddr;
+	xfrm_address_t		old_saddr;
+	xfrm_address_t		new_daddr;
+	xfrm_address_t		new_saddr;
+	u8			proto;
+	u8			mode;
+	u16			reserved;
+	u32			reqid;
+	u16			old_family;
+	u16			new_family;
+};
+
+#define XFRM_KM_TIMEOUT                30
+/* which seqno */
+#define XFRM_REPLAY_SEQ		1
+#define XFRM_REPLAY_OSEQ	2
+#define XFRM_REPLAY_SEQ_MASK	3
+/* what happened */
+#define XFRM_REPLAY_UPDATE	XFRM_AE_CR
+#define XFRM_REPLAY_TIMEOUT	XFRM_AE_CE
+
+/* default aevent timeout in units of 100ms */
+#define XFRM_AE_ETIME			10
+/* Async Event timer multiplier */
+#define XFRM_AE_ETH_M			10
+/* default seq threshold size */
+#define XFRM_AE_SEQT_SIZE		2
+
+struct xfrm_mgr {
+	struct list_head	list;
+	char			*id;
+	int			(*notify)(struct xfrm_state *x, const struct km_event *c);
+	int			(*acquire)(struct xfrm_state *x, struct xfrm_tmpl *, struct xfrm_policy *xp, int dir);
+	struct xfrm_policy	*(*compile_policy)(struct sock *sk, int opt, u8 *data, int len, int *dir);
+	int			(*new_mapping)(struct xfrm_state *x, xfrm_address_t *ipaddr, __be16 sport);
+	int			(*notify_policy)(struct xfrm_policy *x, int dir, const struct km_event *c);
+	int			(*report)(struct net *net, u8 proto, struct xfrm_selector *sel, xfrm_address_t *addr);
+	int			(*migrate)(const struct xfrm_selector *sel,
+					   u8 dir, u8 type,
+					   const struct xfrm_migrate *m,
+					   int num_bundles,
+					   const struct xfrm_kmaddress *k);
+};
+
+extern int xfrm_register_km(struct xfrm_mgr *km);
+extern int xfrm_unregister_km(struct xfrm_mgr *km);
+
+/*
+ * This structure is used for the duration where packets are being
+ * transformed by IPsec.  As soon as the packet leaves IPsec the
+ * area beyond the generic IP part may be overwritten.
+ */
+struct xfrm_skb_cb {
+	union {
+		struct inet_skb_parm h4;
+		struct inet6_skb_parm h6;
+        } header;
+
+        /* Sequence number for replay protection. */
+	union {
+		struct {
+			__u32 low;
+			__u32 hi;
+		} output;
+		struct {
+			__be32 low;
+			__be32 hi;
+		} input;
+	} seq;
+};
+
+#define XFRM_SKB_CB(__skb) ((struct xfrm_skb_cb *)&((__skb)->cb[0]))
+
+/*
+ * This structure is used by the afinfo prepare_input/prepare_output functions
+ * to transmit header information to the mode input/output functions.
+ */
+struct xfrm_mode_skb_cb {
+	union {
+		struct inet_skb_parm h4;
+		struct inet6_skb_parm h6;
+	} header;
+
+	/* Copied from header for IPv4, always set to zero and DF for IPv6. */
+	__be16 id;
+	__be16 frag_off;
+
+	/* IP header length (excluding options or extension headers). */
+	u8 ihl;
+
+	/* TOS for IPv4, class for IPv6. */
+	u8 tos;
+
+	/* TTL for IPv4, hop limitfor IPv6. */
+	u8 ttl;
+
+	/* Protocol for IPv4, NH for IPv6. */
+	u8 protocol;
+
+	/* Option length for IPv4, zero for IPv6. */
+	u8 optlen;
+
+	/* Used by IPv6 only, zero for IPv4. */
+	u8 flow_lbl[3];
+};
+
+#define XFRM_MODE_SKB_CB(__skb) ((struct xfrm_mode_skb_cb *)&((__skb)->cb[0]))
+
+/*
+ * This structure is used by the input processing to locate the SPI and
+ * related information.
+ */
+struct xfrm_spi_skb_cb {
+	union {
+		struct inet_skb_parm h4;
+		struct inet6_skb_parm h6;
+	} header;
+
+	unsigned int daddroff;
+	unsigned int family;
+};
+
+#define XFRM_SPI_SKB_CB(__skb) ((struct xfrm_spi_skb_cb *)&((__skb)->cb[0]))
+
+/* Audit Information */
+struct xfrm_audit {
+	u32	secid;
+	uid_t	loginuid;
+	u32	sessionid;
+};
+
+#ifdef CONFIG_AUDITSYSCALL
+static inline struct audit_buffer *xfrm_audit_start(const char *op)
+{
+	struct audit_buffer *audit_buf = NULL;
+
+	if (audit_enabled == 0)
+		return NULL;
+	audit_buf = audit_log_start(current->audit_context, GFP_ATOMIC,
+				    AUDIT_MAC_IPSEC_EVENT);
+	if (audit_buf == NULL)
+		return NULL;
+	audit_log_format(audit_buf, "op=%s", op);
+	return audit_buf;
+}
+
+static inline void xfrm_audit_helper_usrinfo(uid_t auid, u32 ses, u32 secid,
+					     struct audit_buffer *audit_buf)
+{
+	char *secctx;
+	u32 secctx_len;
+
+	audit_log_format(audit_buf, " auid=%u ses=%u", auid, ses);
+	if (secid != 0 &&
+	    security_secid_to_secctx(secid, &secctx, &secctx_len) == 0) {
+		audit_log_format(audit_buf, " subj=%s", secctx);
+		security_release_secctx(secctx, secctx_len);
+	} else
+		audit_log_task_context(audit_buf);
+}
+
+extern void xfrm_audit_policy_add(struct xfrm_policy *xp, int result,
+				  u32 auid, u32 ses, u32 secid);
+extern void xfrm_audit_policy_delete(struct xfrm_policy *xp, int result,
+				  u32 auid, u32 ses, u32 secid);
+extern void xfrm_audit_state_add(struct xfrm_state *x, int result,
+				 u32 auid, u32 ses, u32 secid);
+extern void xfrm_audit_state_delete(struct xfrm_state *x, int result,
+				    u32 auid, u32 ses, u32 secid);
+extern void xfrm_audit_state_replay_overflow(struct xfrm_state *x,
+					     struct sk_buff *skb);
+extern void xfrm_audit_state_replay(struct xfrm_state *x,
+				    struct sk_buff *skb, __be32 net_seq);
+extern void xfrm_audit_state_notfound_simple(struct sk_buff *skb, u16 family);
+extern void xfrm_audit_state_notfound(struct sk_buff *skb, u16 family,
+				      __be32 net_spi, __be32 net_seq);
+extern void xfrm_audit_state_icvfail(struct xfrm_state *x,
+				     struct sk_buff *skb, u8 proto);
+#else
+
+static inline void xfrm_audit_policy_add(struct xfrm_policy *xp, int result,
+				  u32 auid, u32 ses, u32 secid)
+{
+}
+
+static inline void xfrm_audit_policy_delete(struct xfrm_policy *xp, int result,
+				  u32 auid, u32 ses, u32 secid)
+{
+}
+
+static inline void xfrm_audit_state_add(struct xfrm_state *x, int result,
+				 u32 auid, u32 ses, u32 secid)
+{
+}
+
+static inline void xfrm_audit_state_delete(struct xfrm_state *x, int result,
+				    u32 auid, u32 ses, u32 secid)
+{
+}
+
+static inline void xfrm_audit_state_replay_overflow(struct xfrm_state *x,
+					     struct sk_buff *skb)
+{
+}
+
+static inline void xfrm_audit_state_replay(struct xfrm_state *x,
+					   struct sk_buff *skb, __be32 net_seq)
+{
+}
+
+static inline void xfrm_audit_state_notfound_simple(struct sk_buff *skb,
+				      u16 family)
+{
+}
+
+static inline void xfrm_audit_state_notfound(struct sk_buff *skb, u16 family,
+				      __be32 net_spi, __be32 net_seq)
+{
+}
+
+static inline void xfrm_audit_state_icvfail(struct xfrm_state *x,
+				     struct sk_buff *skb, u8 proto)
+{
+}
+#endif /* CONFIG_AUDITSYSCALL */
+
+static inline void xfrm_pol_hold(struct xfrm_policy *policy)
+{
+	if (likely(policy != NULL))
+		atomic_inc(&policy->refcnt);
+}
+
+extern void xfrm_policy_destroy(struct xfrm_policy *policy);
+
+static inline void xfrm_pol_put(struct xfrm_policy *policy)
+{
+	if (atomic_dec_and_test(&policy->refcnt))
+		xfrm_policy_destroy(policy);
+}
+
+static inline void xfrm_pols_put(struct xfrm_policy **pols, int npols)
+{
+	int i;
+	for (i = npols - 1; i >= 0; --i)
+		xfrm_pol_put(pols[i]);
+}
+
+extern void __xfrm_state_destroy(struct xfrm_state *);
+
+static inline void __xfrm_state_put(struct xfrm_state *x)
+{
+	atomic_dec(&x->refcnt);
+}
+
+static inline void xfrm_state_put(struct xfrm_state *x)
+{
+	if (atomic_dec_and_test(&x->refcnt))
+		__xfrm_state_destroy(x);
+}
+
+static inline void xfrm_state_hold(struct xfrm_state *x)
+{
+	atomic_inc(&x->refcnt);
+}
+
+static inline bool addr_match(const void *token1, const void *token2,
+			      int prefixlen)
+{
+	const __be32 *a1 = token1;
+	const __be32 *a2 = token2;
+	int pdw;
+	int pbi;
+
+	pdw = prefixlen >> 5;	  /* num of whole u32 in prefix */
+	pbi = prefixlen &  0x1f;  /* num of bits in incomplete u32 in prefix */
+
+	if (pdw)
+		if (memcmp(a1, a2, pdw << 2))
+			return false;
+
+	if (pbi) {
+		__be32 mask;
+
+		mask = htonl((0xffffffff) << (32 - pbi));
+
+		if ((a1[pdw] ^ a2[pdw]) & mask)
+			return false;
+	}
+
+	return true;
+}
+
+static inline bool addr4_match(__be32 a1, __be32 a2, u8 prefixlen)
+{
+	/* C99 6.5.7 (3): u32 << 32 is undefined behaviour */
+	if (prefixlen == 0)
+		return true;
+	return !((a1 ^ a2) & htonl(0xFFFFFFFFu << (32 - prefixlen)));
+}
+
+static __inline__
+__be16 xfrm_flowi_sport(const struct flowi *fl, const union flowi_uli *uli)
+{
+	__be16 port;
+	switch(fl->flowi_proto) {
+	case IPPROTO_TCP:
+	case IPPROTO_UDP:
+	case IPPROTO_UDPLITE:
+	case IPPROTO_SCTP:
+		port = uli->ports.sport;
+		break;
+	case IPPROTO_ICMP:
+	case IPPROTO_ICMPV6:
+		port = htons(uli->icmpt.type);
+		break;
+	case IPPROTO_MH:
+		port = htons(uli->mht.type);
+		break;
+	case IPPROTO_GRE:
+		port = htons(ntohl(uli->gre_key) >> 16);
+		break;
+	default:
+		port = 0;	/*XXX*/
+	}
+	return port;
+}
+
+static __inline__
+__be16 xfrm_flowi_dport(const struct flowi *fl, const union flowi_uli *uli)
+{
+	__be16 port;
+	switch(fl->flowi_proto) {
+	case IPPROTO_TCP:
+	case IPPROTO_UDP:
+	case IPPROTO_UDPLITE:
+	case IPPROTO_SCTP:
+		port = uli->ports.dport;
+		break;
+	case IPPROTO_ICMP:
+	case IPPROTO_ICMPV6:
+		port = htons(uli->icmpt.code);
+		break;
+	case IPPROTO_GRE:
+		port = htons(ntohl(uli->gre_key) & 0xffff);
+		break;
+	default:
+		port = 0;	/*XXX*/
+	}
+	return port;
+}
+
+extern int xfrm_selector_match(const struct xfrm_selector *sel,
+			       const struct flowi *fl,
+			       unsigned short family);
+
+#ifdef CONFIG_SECURITY_NETWORK_XFRM
+/*	If neither has a context --> match
+ * 	Otherwise, both must have a context and the sids, doi, alg must match
+ */
+static inline int xfrm_sec_ctx_match(struct xfrm_sec_ctx *s1, struct xfrm_sec_ctx *s2)
+{
+	return ((!s1 && !s2) ||
+		(s1 && s2 &&
+		 (s1->ctx_sid == s2->ctx_sid) &&
+		 (s1->ctx_doi == s2->ctx_doi) &&
+		 (s1->ctx_alg == s2->ctx_alg)));
+}
+#else
+static inline int xfrm_sec_ctx_match(struct xfrm_sec_ctx *s1, struct xfrm_sec_ctx *s2)
+{
+	return 1;
+}
+#endif
+
+/* A struct encoding bundle of transformations to apply to some set of flow.
+ *
+ * dst->child points to the next element of bundle.
+ * dst->xfrm  points to an instanse of transformer.
+ *
+ * Due to unfortunate limitations of current routing cache, which we
+ * have no time to fix, it mirrors struct rtable and bound to the same
+ * routing key, including saddr,daddr. However, we can have many of
+ * bundles differing by session id. All the bundles grow from a parent
+ * policy rule.
+ */
+struct xfrm_dst {
+	union {
+		struct dst_entry	dst;
+		struct rtable		rt;
+		struct rt6_info		rt6;
+	} u;
+	struct dst_entry *route;
+	struct flow_cache_object flo;
+	struct xfrm_policy *pols[XFRM_POLICY_TYPE_MAX];
+	int num_pols, num_xfrms;
+#ifdef CONFIG_XFRM_SUB_POLICY
+	struct flowi *origin;
+	struct xfrm_selector *partner;
+#endif
+	u32 xfrm_genid;
+	u32 policy_genid;
+	u32 route_mtu_cached;
+	u32 child_mtu_cached;
+	u32 route_cookie;
+	u32 path_cookie;
+};
+
+#ifdef CONFIG_XFRM
+static inline void xfrm_dst_destroy(struct xfrm_dst *xdst)
+{
+	xfrm_pols_put(xdst->pols, xdst->num_pols);
+	dst_release(xdst->route);
+	if (likely(xdst->u.dst.xfrm))
+		xfrm_state_put(xdst->u.dst.xfrm);
+#ifdef CONFIG_XFRM_SUB_POLICY
+	kfree(xdst->origin);
+	xdst->origin = NULL;
+	kfree(xdst->partner);
+	xdst->partner = NULL;
+#endif
+}
+#endif
+
+extern void xfrm_dst_ifdown(struct dst_entry *dst, struct net_device *dev);
+
+struct sec_path {
+	atomic_t		refcnt;
+	int			len;
+	struct xfrm_state	*xvec[XFRM_MAX_DEPTH];
+};
+
+static inline int secpath_exists(struct sk_buff *skb)
+{
+#ifdef CONFIG_XFRM
+	return skb->sp != NULL;
+#else
+	return 0;
+#endif
+}
+
+static inline struct sec_path *
+secpath_get(struct sec_path *sp)
+{
+	if (sp)
+		atomic_inc(&sp->refcnt);
+	return sp;
+}
+
+extern void __secpath_destroy(struct sec_path *sp);
+
+static inline void
+secpath_put(struct sec_path *sp)
+{
+	if (sp && atomic_dec_and_test(&sp->refcnt))
+		__secpath_destroy(sp);
+}
+
+extern struct sec_path *secpath_dup(struct sec_path *src);
+
+static inline void
+secpath_reset(struct sk_buff *skb)
+{
+#ifdef CONFIG_XFRM
+	secpath_put(skb->sp);
+	skb->sp = NULL;
+#endif
+}
+
+static inline int
+xfrm_addr_any(const xfrm_address_t *addr, unsigned short family)
+{
+	switch (family) {
+	case AF_INET:
+		return addr->a4 == 0;
+	case AF_INET6:
+		return ipv6_addr_any((struct in6_addr *)&addr->a6);
+	}
+	return 0;
+}
+
+static inline int
+__xfrm4_state_addr_cmp(const struct xfrm_tmpl *tmpl, const struct xfrm_state *x)
+{
+	return	(tmpl->saddr.a4 &&
+		 tmpl->saddr.a4 != x->props.saddr.a4);
+}
+
+static inline int
+__xfrm6_state_addr_cmp(const struct xfrm_tmpl *tmpl, const struct xfrm_state *x)
+{
+	return	(!ipv6_addr_any((struct in6_addr*)&tmpl->saddr) &&
+		 ipv6_addr_cmp((struct in6_addr *)&tmpl->saddr, (struct in6_addr*)&x->props.saddr));
+}
+
+static inline int
+xfrm_state_addr_cmp(const struct xfrm_tmpl *tmpl, const struct xfrm_state *x, unsigned short family)
+{
+	switch (family) {
+	case AF_INET:
+		return __xfrm4_state_addr_cmp(tmpl, x);
+	case AF_INET6:
+		return __xfrm6_state_addr_cmp(tmpl, x);
+	}
+	return !0;
+}
+
+#ifdef CONFIG_XFRM
+extern int __xfrm_policy_check(struct sock *, int dir, struct sk_buff *skb, unsigned short family);
+
+static inline int __xfrm_policy_check2(struct sock *sk, int dir,
+				       struct sk_buff *skb,
+				       unsigned int family, int reverse)
+{
+	struct net *net = dev_net(skb->dev);
+	int ndir = dir | (reverse ? XFRM_POLICY_MASK + 1 : 0);
+
+	if (sk && sk->sk_policy[XFRM_POLICY_IN])
+		return __xfrm_policy_check(sk, ndir, skb, family);
+
+	return	(!net->xfrm.policy_count[dir] && !skb->sp) ||
+		(skb_dst(skb)->flags & DST_NOPOLICY) ||
+		__xfrm_policy_check(sk, ndir, skb, family);
+}
+
+static inline int xfrm_policy_check(struct sock *sk, int dir, struct sk_buff *skb, unsigned short family)
+{
+	return __xfrm_policy_check2(sk, dir, skb, family, 0);
+}
+
+static inline int xfrm4_policy_check(struct sock *sk, int dir, struct sk_buff *skb)
+{
+	return xfrm_policy_check(sk, dir, skb, AF_INET);
+}
+
+static inline int xfrm6_policy_check(struct sock *sk, int dir, struct sk_buff *skb)
+{
+	return xfrm_policy_check(sk, dir, skb, AF_INET6);
+}
+
+static inline int xfrm4_policy_check_reverse(struct sock *sk, int dir,
+					     struct sk_buff *skb)
+{
+	return __xfrm_policy_check2(sk, dir, skb, AF_INET, 1);
+}
+
+static inline int xfrm6_policy_check_reverse(struct sock *sk, int dir,
+					     struct sk_buff *skb)
+{
+	return __xfrm_policy_check2(sk, dir, skb, AF_INET6, 1);
+}
+
+extern int __xfrm_decode_session(struct sk_buff *skb, struct flowi *fl,
+				 unsigned int family, int reverse);
+
+static inline int xfrm_decode_session(struct sk_buff *skb, struct flowi *fl,
+				      unsigned int family)
+{
+	return __xfrm_decode_session(skb, fl, family, 0);
+}
+
+static inline int xfrm_decode_session_reverse(struct sk_buff *skb,
+					      struct flowi *fl,
+					      unsigned int family)
+{
+	return __xfrm_decode_session(skb, fl, family, 1);
+}
+
+extern int __xfrm_route_forward(struct sk_buff *skb, unsigned short family);
+
+static inline int xfrm_route_forward(struct sk_buff *skb, unsigned short family)
+{
+	struct net *net = dev_net(skb->dev);
+
+	return	!net->xfrm.policy_count[XFRM_POLICY_OUT] ||
+		(skb_dst(skb)->flags & DST_NOXFRM) ||
+		__xfrm_route_forward(skb, family);
+}
+
+static inline int xfrm4_route_forward(struct sk_buff *skb)
+{
+	return xfrm_route_forward(skb, AF_INET);
+}
+
+static inline int xfrm6_route_forward(struct sk_buff *skb)
+{
+	return xfrm_route_forward(skb, AF_INET6);
+}
+
+extern int __xfrm_sk_clone_policy(struct sock *sk);
+
+static inline int xfrm_sk_clone_policy(struct sock *sk)
+{
+	if (unlikely(sk->sk_policy[0] || sk->sk_policy[1]))
+		return __xfrm_sk_clone_policy(sk);
+	return 0;
+}
+
+extern int xfrm_policy_delete(struct xfrm_policy *pol, int dir);
+
+static inline void xfrm_sk_free_policy(struct sock *sk)
+{
+	if (unlikely(sk->sk_policy[0] != NULL)) {
+		xfrm_policy_delete(sk->sk_policy[0], XFRM_POLICY_MAX);
+		sk->sk_policy[0] = NULL;
+	}
+	if (unlikely(sk->sk_policy[1] != NULL)) {
+		xfrm_policy_delete(sk->sk_policy[1], XFRM_POLICY_MAX+1);
+		sk->sk_policy[1] = NULL;
+	}
+}
+
+#else
+
+static inline void xfrm_sk_free_policy(struct sock *sk) {}
+static inline int xfrm_sk_clone_policy(struct sock *sk) { return 0; }
+static inline int xfrm6_route_forward(struct sk_buff *skb) { return 1; }  
+static inline int xfrm4_route_forward(struct sk_buff *skb) { return 1; } 
+static inline int xfrm6_policy_check(struct sock *sk, int dir, struct sk_buff *skb)
+{ 
+	return 1; 
+} 
+static inline int xfrm4_policy_check(struct sock *sk, int dir, struct sk_buff *skb)
+{
+	return 1;
+}
+static inline int xfrm_policy_check(struct sock *sk, int dir, struct sk_buff *skb, unsigned short family)
+{
+	return 1;
+}
+static inline int xfrm_decode_session_reverse(struct sk_buff *skb,
+					      struct flowi *fl,
+					      unsigned int family)
+{
+	return -ENOSYS;
+}
+static inline int xfrm4_policy_check_reverse(struct sock *sk, int dir,
+					     struct sk_buff *skb)
+{
+	return 1;
+}
+static inline int xfrm6_policy_check_reverse(struct sock *sk, int dir,
+					     struct sk_buff *skb)
+{
+	return 1;
+}
+#endif
+
+static __inline__
+xfrm_address_t *xfrm_flowi_daddr(const struct flowi *fl, unsigned short family)
+{
+	switch (family){
+	case AF_INET:
+		return (xfrm_address_t *)&fl->u.ip4.daddr;
+	case AF_INET6:
+		return (xfrm_address_t *)&fl->u.ip6.daddr;
+	}
+	return NULL;
+}
+
+static __inline__
+xfrm_address_t *xfrm_flowi_saddr(const struct flowi *fl, unsigned short family)
+{
+	switch (family){
+	case AF_INET:
+		return (xfrm_address_t *)&fl->u.ip4.saddr;
+	case AF_INET6:
+		return (xfrm_address_t *)&fl->u.ip6.saddr;
+	}
+	return NULL;
+}
+
+static __inline__
+void xfrm_flowi_addr_get(const struct flowi *fl,
+			 xfrm_address_t *saddr, xfrm_address_t *daddr,
+			 unsigned short family)
+{
+	switch(family) {
+	case AF_INET:
+		memcpy(&saddr->a4, &fl->u.ip4.saddr, sizeof(saddr->a4));
+		memcpy(&daddr->a4, &fl->u.ip4.daddr, sizeof(daddr->a4));
+		break;
+	case AF_INET6:
+		*(struct in6_addr *)saddr->a6 = fl->u.ip6.saddr;
+		*(struct in6_addr *)daddr->a6 = fl->u.ip6.daddr;
+		break;
+	}
+}
+
+static __inline__ int
+__xfrm4_state_addr_check(const struct xfrm_state *x,
+			 const xfrm_address_t *daddr, const xfrm_address_t *saddr)
+{
+	if (daddr->a4 == x->id.daddr.a4 &&
+	    (saddr->a4 == x->props.saddr.a4 || !saddr->a4 || !x->props.saddr.a4))
+		return 1;
+	return 0;
+}
+
+static __inline__ int
+__xfrm6_state_addr_check(const struct xfrm_state *x,
+			 const xfrm_address_t *daddr, const xfrm_address_t *saddr)
+{
+	if (!ipv6_addr_cmp((struct in6_addr *)daddr, (struct in6_addr *)&x->id.daddr) &&
+	    (!ipv6_addr_cmp((struct in6_addr *)saddr, (struct in6_addr *)&x->props.saddr)|| 
+	     ipv6_addr_any((struct in6_addr *)saddr) || 
+	     ipv6_addr_any((struct in6_addr *)&x->props.saddr)))
+		return 1;
+	return 0;
+}
+
+static __inline__ int
+xfrm_state_addr_check(const struct xfrm_state *x,
+		      const xfrm_address_t *daddr, const xfrm_address_t *saddr,
+		      unsigned short family)
+{
+	switch (family) {
+	case AF_INET:
+		return __xfrm4_state_addr_check(x, daddr, saddr);
+	case AF_INET6:
+		return __xfrm6_state_addr_check(x, daddr, saddr);
+	}
+	return 0;
+}
+
+static __inline__ int
+xfrm_state_addr_flow_check(const struct xfrm_state *x, const struct flowi *fl,
+			   unsigned short family)
+{
+	switch (family) {
+	case AF_INET:
+		return __xfrm4_state_addr_check(x,
+						(const xfrm_address_t *)&fl->u.ip4.daddr,
+						(const xfrm_address_t *)&fl->u.ip4.saddr);
+	case AF_INET6:
+		return __xfrm6_state_addr_check(x,
+						(const xfrm_address_t *)&fl->u.ip6.daddr,
+						(const xfrm_address_t *)&fl->u.ip6.saddr);
+	}
+	return 0;
+}
+
+static inline int xfrm_state_kern(const struct xfrm_state *x)
+{
+	return atomic_read(&x->tunnel_users);
+}
+
+static inline int xfrm_id_proto_match(u8 proto, u8 userproto)
+{
+	return (!userproto || proto == userproto ||
+		(userproto == IPSEC_PROTO_ANY && (proto == IPPROTO_AH ||
+						  proto == IPPROTO_ESP ||
+						  proto == IPPROTO_COMP)));
+}
+
+/*
+ * xfrm algorithm information
+ */
+struct xfrm_algo_aead_info {
+	u16 icv_truncbits;
+};
+
+struct xfrm_algo_auth_info {
+	u16 icv_truncbits;
+	u16 icv_fullbits;
+};
+
+struct xfrm_algo_encr_info {
+	u16 blockbits;
+	u16 defkeybits;
+};
+
+struct xfrm_algo_comp_info {
+	u16 threshold;
+};
+
+struct xfrm_algo_desc {
+	char *name;
+	char *compat;
+	u8 available:1;
+	union {
+		struct xfrm_algo_aead_info aead;
+		struct xfrm_algo_auth_info auth;
+		struct xfrm_algo_encr_info encr;
+		struct xfrm_algo_comp_info comp;
+	} uinfo;
+	struct sadb_alg desc;
+};
+
+/* XFRM tunnel handlers.  */
+struct xfrm_tunnel {
+	int (*handler)(struct sk_buff *skb);
+	int (*err_handler)(struct sk_buff *skb, u32 info);
+
+	struct xfrm_tunnel __rcu *next;
+	int priority;
+};
+
+struct xfrm6_tunnel {
+	int (*handler)(struct sk_buff *skb);
+	int (*err_handler)(struct sk_buff *skb, struct inet6_skb_parm *opt,
+			   u8 type, u8 code, int offset, __be32 info);
+	struct xfrm6_tunnel __rcu *next;
+	int priority;
+};
+
+extern void xfrm_init(void);
+extern void xfrm4_init(int rt_hash_size);
+extern int xfrm_state_init(struct net *net);
+extern void xfrm_state_fini(struct net *net);
+extern void xfrm4_state_init(void);
+#ifdef CONFIG_XFRM
+extern int xfrm6_init(void);
+extern void xfrm6_fini(void);
+extern int xfrm6_state_init(void);
+extern void xfrm6_state_fini(void);
+#else
+static inline int xfrm6_init(void)
+{
+	return 0;
+}
+static inline void xfrm6_fini(void)
+{
+	;
+}
+#endif
+
+#ifdef CONFIG_XFRM_STATISTICS
+extern int xfrm_proc_init(struct net *net);
+extern void xfrm_proc_fini(struct net *net);
+#endif
+
+extern int xfrm_sysctl_init(struct net *net);
+#ifdef CONFIG_SYSCTL
+extern void xfrm_sysctl_fini(struct net *net);
+#else
+static inline void xfrm_sysctl_fini(struct net *net)
+{
+}
+#endif
+
+extern void xfrm_state_walk_init(struct xfrm_state_walk *walk, u8 proto);
+extern int xfrm_state_walk(struct net *net, struct xfrm_state_walk *walk,
+			   int (*func)(struct xfrm_state *, int, void*), void *);
+extern void xfrm_state_walk_done(struct xfrm_state_walk *walk);
+extern struct xfrm_state *xfrm_state_alloc(struct net *net);
+extern struct xfrm_state *xfrm_state_find(const xfrm_address_t *daddr,
+					  const xfrm_address_t *saddr,
+					  const struct flowi *fl,
+					  struct xfrm_tmpl *tmpl,
+					  struct xfrm_policy *pol, int *err,
+					  unsigned short family);
+extern struct xfrm_state *xfrm_stateonly_find(struct net *net, u32 mark,
+					       xfrm_address_t *daddr,
+					       xfrm_address_t *saddr,
+					       unsigned short family,
+					       u8 mode, u8 proto, u32 reqid);
+extern int xfrm_state_check_expire(struct xfrm_state *x);
+extern void xfrm_state_insert(struct xfrm_state *x);
+extern int xfrm_state_add(struct xfrm_state *x);
+extern int xfrm_state_update(struct xfrm_state *x);
+extern struct xfrm_state *xfrm_state_lookup(struct net *net, u32 mark,
+					    const xfrm_address_t *daddr, __be32 spi,
+					    u8 proto, unsigned short family);
+extern struct xfrm_state *xfrm_state_lookup_byaddr(struct net *net, u32 mark,
+						   const xfrm_address_t *daddr,
+						   const xfrm_address_t *saddr,
+						   u8 proto,
+						   unsigned short family);
+#ifdef CONFIG_XFRM_SUB_POLICY
+extern int xfrm_tmpl_sort(struct xfrm_tmpl **dst, struct xfrm_tmpl **src,
+			  int n, unsigned short family);
+extern int xfrm_state_sort(struct xfrm_state **dst, struct xfrm_state **src,
+			   int n, unsigned short family);
+#else
+static inline int xfrm_tmpl_sort(struct xfrm_tmpl **dst, struct xfrm_tmpl **src,
+				 int n, unsigned short family)
+{
+	return -ENOSYS;
+}
+
+static inline int xfrm_state_sort(struct xfrm_state **dst, struct xfrm_state **src,
+				  int n, unsigned short family)
+{
+	return -ENOSYS;
+}
+#endif
+
+struct xfrmk_sadinfo {
+	u32 sadhcnt; /* current hash bkts */
+	u32 sadhmcnt; /* max allowed hash bkts */
+	u32 sadcnt; /* current running count */
+};
+
+struct xfrmk_spdinfo {
+	u32 incnt;
+	u32 outcnt;
+	u32 fwdcnt;
+	u32 inscnt;
+	u32 outscnt;
+	u32 fwdscnt;
+	u32 spdhcnt;
+	u32 spdhmcnt;
+};
+
+extern struct xfrm_state *xfrm_find_acq_byseq(struct net *net, u32 mark,
+					      u32 seq);
+extern int xfrm_state_delete(struct xfrm_state *x);
+extern int xfrm_state_flush(struct net *net, u8 proto, struct xfrm_audit *audit_info);
+extern void xfrm_sad_getinfo(struct net *net, struct xfrmk_sadinfo *si);
+extern void xfrm_spd_getinfo(struct net *net, struct xfrmk_spdinfo *si);
+extern u32 xfrm_replay_seqhi(struct xfrm_state *x, __be32 net_seq);
+extern int xfrm_init_replay(struct xfrm_state *x);
+extern int xfrm_state_mtu(struct xfrm_state *x, int mtu);
+extern int __xfrm_init_state(struct xfrm_state *x, bool init_replay);
+extern int xfrm_init_state(struct xfrm_state *x);
+extern int xfrm_prepare_input(struct xfrm_state *x, struct sk_buff *skb);
+extern int xfrm_input(struct sk_buff *skb, int nexthdr, __be32 spi,
+		      int encap_type);
+extern int xfrm_input_resume(struct sk_buff *skb, int nexthdr);
+extern int xfrm_output_resume(struct sk_buff *skb, int err);
+extern int xfrm_output(struct sk_buff *skb);
+extern int xfrm_inner_extract_output(struct xfrm_state *x, struct sk_buff *skb);
+extern int xfrm4_extract_header(struct sk_buff *skb);
+extern int xfrm4_extract_input(struct xfrm_state *x, struct sk_buff *skb);
+extern int xfrm4_rcv_encap(struct sk_buff *skb, int nexthdr, __be32 spi,
+			   int encap_type);
+extern int xfrm4_transport_finish(struct sk_buff *skb, int async);
+extern int xfrm4_rcv(struct sk_buff *skb);
+
+static inline int xfrm4_rcv_spi(struct sk_buff *skb, int nexthdr, __be32 spi)
+{
+	return xfrm4_rcv_encap(skb, nexthdr, spi, 0);
+}
+
+extern int xfrm4_extract_output(struct xfrm_state *x, struct sk_buff *skb);
+extern int xfrm4_prepare_output(struct xfrm_state *x, struct sk_buff *skb);
+extern int xfrm4_output(struct sk_buff *skb);
+extern int xfrm4_output_finish(struct sk_buff *skb);
+extern int xfrm4_tunnel_register(struct xfrm_tunnel *handler, unsigned short family);
+extern int xfrm4_tunnel_deregister(struct xfrm_tunnel *handler, unsigned short family);
+extern int xfrm6_extract_header(struct sk_buff *skb);
+extern int xfrm6_extract_input(struct xfrm_state *x, struct sk_buff *skb);
+extern int xfrm6_rcv_spi(struct sk_buff *skb, int nexthdr, __be32 spi);
+extern int xfrm6_transport_finish(struct sk_buff *skb, int async);
+extern int xfrm6_rcv(struct sk_buff *skb);
+extern int xfrm6_input_addr(struct sk_buff *skb, xfrm_address_t *daddr,
+			    xfrm_address_t *saddr, u8 proto);
+extern int xfrm6_tunnel_register(struct xfrm6_tunnel *handler, unsigned short family);
+extern int xfrm6_tunnel_deregister(struct xfrm6_tunnel *handler, unsigned short family);
+extern __be32 xfrm6_tunnel_alloc_spi(struct net *net, xfrm_address_t *saddr);
+extern __be32 xfrm6_tunnel_spi_lookup(struct net *net, const xfrm_address_t *saddr);
+extern int xfrm6_extract_output(struct xfrm_state *x, struct sk_buff *skb);
+extern int xfrm6_prepare_output(struct xfrm_state *x, struct sk_buff *skb);
+extern int xfrm6_output(struct sk_buff *skb);
+extern int xfrm6_output_finish(struct sk_buff *skb);
+extern int xfrm6_find_1stfragopt(struct xfrm_state *x, struct sk_buff *skb,
+				 u8 **prevhdr);
+
+#ifdef CONFIG_XFRM
+extern int xfrm4_udp_encap_rcv(struct sock *sk, struct sk_buff *skb);
+extern int xfrm_user_policy(struct sock *sk, int optname, u8 __user *optval, int optlen);
+#else
+static inline int xfrm_user_policy(struct sock *sk, int optname, u8 __user *optval, int optlen)
+{
+ 	return -ENOPROTOOPT;
+} 
+
+static inline int xfrm4_udp_encap_rcv(struct sock *sk, struct sk_buff *skb)
+{
+ 	/* should not happen */
+ 	kfree_skb(skb);
+	return 0;
+}
+#endif
+
+struct xfrm_policy *xfrm_policy_alloc(struct net *net, gfp_t gfp);
+
+extern void xfrm_policy_walk_init(struct xfrm_policy_walk *walk, u8 type);
+extern int xfrm_policy_walk(struct net *net, struct xfrm_policy_walk *walk,
+	int (*func)(struct xfrm_policy *, int, int, void*), void *);
+extern void xfrm_policy_walk_done(struct xfrm_policy_walk *walk);
+int xfrm_policy_insert(int dir, struct xfrm_policy *policy, int excl);
+struct xfrm_policy *xfrm_policy_bysel_ctx(struct net *net, u32 mark,
+					  u8 type, int dir,
+					  struct xfrm_selector *sel,
+					  struct xfrm_sec_ctx *ctx, int delete,
+					  int *err);
+struct xfrm_policy *xfrm_policy_byid(struct net *net, u32 mark, u8, int dir, u32 id, int delete, int *err);
+int xfrm_policy_flush(struct net *net, u8 type, struct xfrm_audit *audit_info);
+u32 xfrm_get_acqseq(void);
+extern int xfrm_alloc_spi(struct xfrm_state *x, u32 minspi, u32 maxspi);
+struct xfrm_state *xfrm_find_acq(struct net *net, struct xfrm_mark *mark,
+				 u8 mode, u32 reqid, u8 proto,
+				 const xfrm_address_t *daddr,
+				 const xfrm_address_t *saddr, int create,
+				 unsigned short family);
+extern int xfrm_sk_policy_insert(struct sock *sk, int dir, struct xfrm_policy *pol);
+
+#ifdef CONFIG_XFRM_MIGRATE
+extern int km_migrate(const struct xfrm_selector *sel, u8 dir, u8 type,
+		      const struct xfrm_migrate *m, int num_bundles,
+		      const struct xfrm_kmaddress *k);
+extern struct xfrm_state * xfrm_migrate_state_find(struct xfrm_migrate *m);
+extern struct xfrm_state * xfrm_state_migrate(struct xfrm_state *x,
+					      struct xfrm_migrate *m);
+extern int xfrm_migrate(const struct xfrm_selector *sel, u8 dir, u8 type,
+			struct xfrm_migrate *m, int num_bundles,
+			struct xfrm_kmaddress *k);
+#endif
+
+extern int km_new_mapping(struct xfrm_state *x, xfrm_address_t *ipaddr, __be16 sport);
+extern void km_policy_expired(struct xfrm_policy *pol, int dir, int hard, u32 pid);
+extern int km_report(struct net *net, u8 proto, struct xfrm_selector *sel, xfrm_address_t *addr);
+
+extern void xfrm_input_init(void);
+extern int xfrm_parse_spi(struct sk_buff *skb, u8 nexthdr, __be32 *spi, __be32 *seq);
+
+extern void xfrm_probe_algs(void);
+extern int xfrm_count_auth_supported(void);
+extern int xfrm_count_enc_supported(void);
+extern struct xfrm_algo_desc *xfrm_aalg_get_byidx(unsigned int idx);
+extern struct xfrm_algo_desc *xfrm_ealg_get_byidx(unsigned int idx);
+extern struct xfrm_algo_desc *xfrm_aalg_get_byid(int alg_id);
+extern struct xfrm_algo_desc *xfrm_ealg_get_byid(int alg_id);
+extern struct xfrm_algo_desc *xfrm_calg_get_byid(int alg_id);
+extern struct xfrm_algo_desc *xfrm_aalg_get_byname(const char *name, int probe);
+extern struct xfrm_algo_desc *xfrm_ealg_get_byname(const char *name, int probe);
+extern struct xfrm_algo_desc *xfrm_calg_get_byname(const char *name, int probe);
+extern struct xfrm_algo_desc *xfrm_aead_get_byname(const char *name, int icv_len,
+						   int probe);
+
+static inline int xfrm_addr_cmp(const xfrm_address_t *a,
+				const xfrm_address_t *b,
+				int family)
+{
+	switch (family) {
+	default:
+	case AF_INET:
+		return (__force u32)a->a4 - (__force u32)b->a4;
+	case AF_INET6:
+		return ipv6_addr_cmp((const struct in6_addr *)a,
+				     (const struct in6_addr *)b);
+	}
+}
+
+static inline int xfrm_policy_id2dir(u32 index)
+{
+	return index & 7;
+}
+
+#ifdef CONFIG_XFRM
+static inline int xfrm_aevent_is_on(struct net *net)
+{
+	struct sock *nlsk;
+	int ret = 0;
+
+	rcu_read_lock();
+	nlsk = rcu_dereference(net->xfrm.nlsk);
+	if (nlsk)
+		ret = netlink_has_listeners(nlsk, XFRMNLGRP_AEVENTS);
+	rcu_read_unlock();
+	return ret;
+}
+#endif
+
+static inline int xfrm_alg_len(const struct xfrm_algo *alg)
+{
+	return sizeof(*alg) + ((alg->alg_key_len + 7) / 8);
+}
+
+static inline int xfrm_alg_auth_len(const struct xfrm_algo_auth *alg)
+{
+	return sizeof(*alg) + ((alg->alg_key_len + 7) / 8);
+}
+
+static inline int xfrm_replay_state_esn_len(struct xfrm_replay_state_esn *replay_esn)
+{
+	return sizeof(*replay_esn) + replay_esn->bmp_len * sizeof(__u32);
+}
+
+#ifdef CONFIG_XFRM_MIGRATE
+static inline int xfrm_replay_clone(struct xfrm_state *x,
+				     struct xfrm_state *orig)
+{
+	x->replay_esn = kzalloc(xfrm_replay_state_esn_len(orig->replay_esn),
+				GFP_KERNEL);
+	if (!x->replay_esn)
+		return -ENOMEM;
+
+	x->replay_esn->bmp_len = orig->replay_esn->bmp_len;
+	x->replay_esn->replay_window = orig->replay_esn->replay_window;
+
+	x->preplay_esn = kmemdup(x->replay_esn,
+				 xfrm_replay_state_esn_len(x->replay_esn),
+				 GFP_KERNEL);
+	if (!x->preplay_esn) {
+		kfree(x->replay_esn);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static inline struct xfrm_algo *xfrm_algo_clone(struct xfrm_algo *orig)
+{
+	return kmemdup(orig, xfrm_alg_len(orig), GFP_KERNEL);
+}
+
+static inline struct xfrm_algo_auth *xfrm_algo_auth_clone(struct xfrm_algo_auth *orig)
+{
+	return kmemdup(orig, xfrm_alg_auth_len(orig), GFP_KERNEL);
+}
+
+static inline void xfrm_states_put(struct xfrm_state **states, int n)
+{
+	int i;
+	for (i = 0; i < n; i++)
+		xfrm_state_put(*(states + i));
+}
+
+static inline void xfrm_states_delete(struct xfrm_state **states, int n)
+{
+	int i;
+	for (i = 0; i < n; i++)
+		xfrm_state_delete(*(states + i));
+}
+#endif
+
+#ifdef CONFIG_XFRM
+static inline struct xfrm_state *xfrm_input_state(struct sk_buff *skb)
+{
+	return skb->sp->xvec[skb->sp->len - 1];
+}
+#endif
+
+static inline int xfrm_mark_get(struct nlattr **attrs, struct xfrm_mark *m)
+{
+	if (attrs[XFRMA_MARK])
+		memcpy(m, nla_data(attrs[XFRMA_MARK]), sizeof(struct xfrm_mark));
+	else
+		m->v = m->m = 0;
+
+	return m->v & m->m;
+}
+
+static inline int xfrm_mark_put(struct sk_buff *skb, const struct xfrm_mark *m)
+{
+	if (m->m | m->v)
+		NLA_PUT(skb, XFRMA_MARK, sizeof(struct xfrm_mark), m);
+	return 0;
+
+nla_put_failure:
+	return -1;
+}
+
+#endif	/* _NET_XFRM_H */
diff --git a/include/pcmcia/ciscode.h b/include/pcmcia/ciscode.h
new file mode 100644
index 00000000..b4179857
--- /dev/null
+++ b/include/pcmcia/ciscode.h
@@ -0,0 +1,131 @@
+/*
+ * ciscode.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The initial developer of the original code is David A. Hinds
+ * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
+ * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
+ *
+ * (C) 1999		David A. Hinds
+ */
+
+#ifndef _LINUX_CISCODE_H
+#define _LINUX_CISCODE_H
+
+/* Manufacturer and Product ID codes */
+
+#define MANFID_3COM			0x0101
+#define PRODID_3COM_3CXEM556		0x0035
+#define PRODID_3COM_3CCFEM556		0x0556
+#define PRODID_3COM_3C562		0x0562
+
+#define MANFID_ACCTON			0x01bf
+#define PRODID_ACCTON_EN2226		0x010a
+
+#define MANFID_ADAPTEC			0x012f
+#define PRODID_ADAPTEC_SCSI		0x0001
+
+#define MANFID_ATT			0xffff
+#define PRODID_ATT_KIT			0x0100
+
+#define MANFID_CONTEC			0xc001
+
+#define MANFID_FUJITSU			0x0004
+#define PRODID_FUJITSU_MBH10302		0x0004
+#define PRODID_FUJITSU_MBH10304		0x1003
+#define PRODID_FUJITSU_LA501		0x2000
+
+#define MANFID_IBM			0x00a4
+#define PRODID_IBM_HOME_AND_AWAY	0x002e
+
+#define MANFID_INTEL			0x0089
+#define PRODID_INTEL_DUAL_RS232		0x0301
+#define PRODID_INTEL_2PLUS		0x8422
+
+#define MANFID_KME			0x0032
+#define PRODID_KME_KXLC005_A		0x0704
+#define PRODID_KME_KXLC005_B		0x2904
+
+#define MANFID_LINKSYS			0x0143
+#define PRODID_LINKSYS_PCMLM28		0xc0ab
+#define PRODID_LINKSYS_3400		0x3341
+
+#define MANFID_MEGAHERTZ		0x0102
+#define PRODID_MEGAHERTZ_VARIOUS	0x0000
+#define PRODID_MEGAHERTZ_EM3288		0x0006
+
+#define MANFID_MACNICA			0xc00b
+
+#define MANFID_MOTOROLA			0x0109
+#define PRODID_MOTOROLA_MARINER		0x0501
+
+#define MANFID_NATINST			0x010b
+#define PRODID_NATINST_QUAD_RS232	0xd180
+
+#define MANFID_NEW_MEDIA		0x0057
+
+#define MANFID_NOKIA			0x0124
+#define PRODID_NOKIA_CARDPHONE		0x0900
+
+#define MANFID_OLICOM			0x0121
+#define PRODID_OLICOM_OC2231		0x3122
+#define PRODID_OLICOM_OC2232		0x3222
+
+#define MANFID_OMEGA			0x0137
+#define PRODID_OMEGA_QSP_100		0x0025
+
+#define MANFID_OSITECH			0x0140
+#define PRODID_OSITECH_JACK_144		0x0001
+#define PRODID_OSITECH_JACK_288		0x0002
+#define PRODID_OSITECH_JACK_336		0x0007
+#define PRODID_OSITECH_SEVEN		0x0008
+
+#define MANFID_OXSEMI			0x0279
+
+#define MANFID_PIONEER			0x000b
+
+#define MANFID_PSION			0x016c
+#define PRODID_PSION_NET100		0x0023
+
+#define MANFID_QUATECH			0x0137
+#define PRODID_QUATECH_SPP100		0x0003
+#define PRODID_QUATECH_DUAL_RS232	0x0012
+#define PRODID_QUATECH_DUAL_RS232_D1	0x0007
+#define PRODID_QUATECH_DUAL_RS232_D2	0x0052
+#define PRODID_QUATECH_DUAL_RS232_G	0x004d
+#define PRODID_QUATECH_QUAD_RS232	0x001b
+#define PRODID_QUATECH_DUAL_RS422	0x000e
+#define PRODID_QUATECH_QUAD_RS422	0x0045
+
+#define MANFID_SMC			0x0108
+#define PRODID_SMC_ETHER		0x0105
+
+#define MANFID_SOCKET			0x0104
+#define PRODID_SOCKET_DUAL_RS232	0x0006
+#define PRODID_SOCKET_EIO		0x000a
+#define PRODID_SOCKET_LPE		0x000d
+#define PRODID_SOCKET_LPE_CF		0x0075
+
+#define MANFID_SUNDISK			0x0045
+
+#define MANFID_TDK			0x0105
+#define PRODID_TDK_CF010		0x0900
+#define PRODID_TDK_NP9610		0x0d0a
+#define PRODID_TDK_MN3200		0x0e0a
+#define PRODID_TDK_GN3410		0x4815
+
+#define MANFID_TOSHIBA			0x0098
+
+#define MANFID_UNGERMANN		0x02c0
+
+#define MANFID_XIRCOM			0x0105
+
+#define MANFID_POSSIO			0x030c
+#define PRODID_POSSIO_GCC		0x0003
+
+#define MANFID_NEC			0x0010
+
+#endif /* _LINUX_CISCODE_H */
diff --git a/include/pcmcia/cisreg.h b/include/pcmcia/cisreg.h
new file mode 100644
index 00000000..ddaad465
--- /dev/null
+++ b/include/pcmcia/cisreg.h
@@ -0,0 +1,120 @@
+/*
+ * cisreg.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The initial developer of the original code is David A. Hinds
+ * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
+ * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
+ *
+ * (C) 1999             David A. Hinds
+ */
+
+#ifndef _LINUX_CISREG_H
+#define _LINUX_CISREG_H
+
+/*
+ * Offsets from ConfigBase for CIS registers
+ */
+#define CISREG_COR		0x00
+#define CISREG_CCSR		0x02
+#define CISREG_PRR		0x04
+#define CISREG_SCR		0x06
+#define CISREG_ESR		0x08
+#define CISREG_IOBASE_0		0x0a
+#define CISREG_IOBASE_1		0x0c
+#define CISREG_IOBASE_2		0x0e
+#define CISREG_IOBASE_3		0x10
+#define CISREG_IOSIZE		0x12
+
+/*
+ * Configuration Option Register
+ */
+#define COR_CONFIG_MASK		0x3f
+#define COR_MFC_CONFIG_MASK	0x38
+#define COR_FUNC_ENA		0x01
+#define COR_ADDR_DECODE		0x02
+#define COR_IREQ_ENA		0x04
+#define COR_LEVEL_REQ		0x40
+#define COR_SOFT_RESET		0x80
+
+/*
+ * Card Configuration and Status Register
+ */
+#define CCSR_INTR_ACK		0x01
+#define CCSR_INTR_PENDING	0x02
+#define CCSR_POWER_DOWN		0x04
+#define CCSR_AUDIO_ENA		0x08
+#define CCSR_IOIS8		0x20
+#define CCSR_SIGCHG_ENA		0x40
+#define CCSR_CHANGED		0x80
+
+/*
+ * Pin Replacement Register
+ */
+#define PRR_WP_STATUS		0x01
+#define PRR_READY_STATUS	0x02
+#define PRR_BVD2_STATUS		0x04
+#define PRR_BVD1_STATUS		0x08
+#define PRR_WP_EVENT		0x10
+#define PRR_READY_EVENT		0x20
+#define PRR_BVD2_EVENT		0x40
+#define PRR_BVD1_EVENT		0x80
+
+/*
+ * Socket and Copy Register
+ */
+#define SCR_SOCKET_NUM		0x0f
+#define SCR_COPY_NUM		0x70
+
+/*
+ * Extended Status Register
+ */
+#define ESR_REQ_ATTN_ENA	0x01
+#define ESR_REQ_ATTN		0x10
+
+/*
+ * CardBus Function Status Registers
+ */
+#define CBFN_EVENT		0x00
+#define CBFN_MASK		0x04
+#define CBFN_STATE		0x08
+#define CBFN_FORCE		0x0c
+
+/*
+ * These apply to all the CardBus function registers
+ */
+#define CBFN_WP			0x0001
+#define CBFN_READY		0x0002
+#define CBFN_BVD2		0x0004
+#define CBFN_BVD1		0x0008
+#define CBFN_GWAKE		0x0010
+#define CBFN_INTR		0x8000
+
+/*
+ * Extra bits in the Function Event Mask Register
+ */
+#define FEMR_BAM_ENA		0x0020
+#define FEMR_PWM_ENA		0x0040
+#define FEMR_WKUP_MASK		0x4000
+
+/*
+ * Indirect Addressing Registers for Zoomed Video: these are addresses
+ * in common memory space
+ */
+#define CISREG_ICTRL0		0x02	/* control registers */
+#define CISREG_ICTRL1		0x03
+#define CISREG_IADDR0		0x04	/* address registers */
+#define CISREG_IADDR1		0x05
+#define CISREG_IADDR2		0x06
+#define CISREG_IADDR3		0x07
+#define CISREG_IDATA0		0x08	/* data registers */
+#define CISREG_IDATA1		0x09
+
+#define ICTRL0_COMMON		0x01
+#define ICTRL0_AUTOINC		0x02
+#define ICTRL0_BYTEGRAN		0x04
+
+#endif /* _LINUX_CISREG_H */
diff --git a/include/pcmcia/cistpl.h b/include/pcmcia/cistpl.h
new file mode 100644
index 00000000..1c5088c9
--- /dev/null
+++ b/include/pcmcia/cistpl.h
@@ -0,0 +1,580 @@
+/*
+ * cistpl.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The initial developer of the original code is David A. Hinds
+ * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
+ * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
+ *
+ * (C) 1999             David A. Hinds
+ */
+
+#ifndef _LINUX_CISTPL_H
+#define _LINUX_CISTPL_H
+
+typedef unsigned char cisdata_t;
+
+#define CISTPL_NULL		0x00
+#define CISTPL_DEVICE		0x01
+#define CISTPL_LONGLINK_CB	0x02
+#define CISTPL_INDIRECT		0x03
+#define CISTPL_CONFIG_CB	0x04
+#define CISTPL_CFTABLE_ENTRY_CB	0x05
+#define CISTPL_LONGLINK_MFC	0x06
+#define CISTPL_BAR		0x07
+#define CISTPL_PWR_MGMNT	0x08
+#define CISTPL_EXTDEVICE	0x09
+#define CISTPL_CHECKSUM		0x10
+#define CISTPL_LONGLINK_A	0x11
+#define CISTPL_LONGLINK_C	0x12
+#define CISTPL_LINKTARGET	0x13
+#define CISTPL_NO_LINK		0x14
+#define CISTPL_VERS_1		0x15
+#define CISTPL_ALTSTR		0x16
+#define CISTPL_DEVICE_A		0x17
+#define CISTPL_JEDEC_C		0x18
+#define CISTPL_JEDEC_A		0x19
+#define CISTPL_CONFIG		0x1a
+#define CISTPL_CFTABLE_ENTRY	0x1b
+#define CISTPL_DEVICE_OC	0x1c
+#define CISTPL_DEVICE_OA	0x1d
+#define CISTPL_DEVICE_GEO	0x1e
+#define CISTPL_DEVICE_GEO_A	0x1f
+#define CISTPL_MANFID		0x20
+#define CISTPL_FUNCID		0x21
+#define CISTPL_FUNCE		0x22
+#define CISTPL_SWIL		0x23
+#define CISTPL_END		0xff
+/* Layer 2 tuples */
+#define CISTPL_VERS_2		0x40
+#define CISTPL_FORMAT		0x41
+#define CISTPL_GEOMETRY		0x42
+#define CISTPL_BYTEORDER	0x43
+#define CISTPL_DATE		0x44
+#define CISTPL_BATTERY		0x45
+#define CISTPL_FORMAT_A		0x47
+/* Layer 3 tuples */
+#define CISTPL_ORG		0x46
+#define CISTPL_SPCL		0x90
+
+typedef struct cistpl_longlink_t {
+    u_int	addr;
+} cistpl_longlink_t;
+
+typedef struct cistpl_checksum_t {
+    u_short	addr;
+    u_short	len;
+    u_char	sum;
+} cistpl_checksum_t;
+
+#define CISTPL_MAX_FUNCTIONS	8
+#define CISTPL_MFC_ATTR		0x00
+#define CISTPL_MFC_COMMON	0x01
+
+typedef struct cistpl_longlink_mfc_t {
+    u_char	nfn;
+    struct {
+	u_char	space;
+	u_int	addr;
+    } fn[CISTPL_MAX_FUNCTIONS];
+} cistpl_longlink_mfc_t;
+
+#define CISTPL_MAX_ALTSTR_STRINGS	4
+
+typedef struct cistpl_altstr_t {
+    u_char	ns;
+    u_char	ofs[CISTPL_MAX_ALTSTR_STRINGS];
+    char	str[254];
+} cistpl_altstr_t;
+
+#define CISTPL_DTYPE_NULL	0x00
+#define CISTPL_DTYPE_ROM	0x01
+#define CISTPL_DTYPE_OTPROM	0x02
+#define CISTPL_DTYPE_EPROM	0x03
+#define CISTPL_DTYPE_EEPROM	0x04
+#define CISTPL_DTYPE_FLASH	0x05
+#define CISTPL_DTYPE_SRAM	0x06
+#define CISTPL_DTYPE_DRAM	0x07
+#define CISTPL_DTYPE_FUNCSPEC	0x0d
+#define CISTPL_DTYPE_EXTEND	0x0e
+
+#define CISTPL_MAX_DEVICES	4
+
+typedef struct cistpl_device_t {
+    u_char	ndev;
+    struct {
+	u_char 	type;
+	u_char	wp;
+	u_int	speed;
+	u_int	size;
+    } dev[CISTPL_MAX_DEVICES];
+} cistpl_device_t;
+
+#define CISTPL_DEVICE_MWAIT	0x01
+#define CISTPL_DEVICE_3VCC	0x02
+
+typedef struct cistpl_device_o_t {
+    u_char		flags;
+    cistpl_device_t	device;
+} cistpl_device_o_t;
+
+#define CISTPL_VERS_1_MAX_PROD_STRINGS	4
+
+typedef struct cistpl_vers_1_t {
+    u_char	major;
+    u_char	minor;
+    u_char	ns;
+    u_char	ofs[CISTPL_VERS_1_MAX_PROD_STRINGS];
+    char	str[254];
+} cistpl_vers_1_t;
+
+typedef struct cistpl_jedec_t {
+    u_char	nid;
+    struct {
+	u_char	mfr;
+	u_char	info;
+    } id[CISTPL_MAX_DEVICES];
+} cistpl_jedec_t;
+
+typedef struct cistpl_manfid_t {
+    u_short	manf;
+    u_short	card;
+} cistpl_manfid_t;
+
+#define CISTPL_FUNCID_MULTI	0x00
+#define CISTPL_FUNCID_MEMORY	0x01
+#define CISTPL_FUNCID_SERIAL	0x02
+#define CISTPL_FUNCID_PARALLEL	0x03
+#define CISTPL_FUNCID_FIXED	0x04
+#define CISTPL_FUNCID_VIDEO	0x05
+#define CISTPL_FUNCID_NETWORK	0x06
+#define CISTPL_FUNCID_AIMS	0x07
+#define CISTPL_FUNCID_SCSI	0x08
+
+#define CISTPL_SYSINIT_POST	0x01
+#define CISTPL_SYSINIT_ROM	0x02
+
+typedef struct cistpl_funcid_t {
+    u_char	func;
+    u_char	sysinit;
+} cistpl_funcid_t;
+
+typedef struct cistpl_funce_t {
+    u_char	type;
+    u_char	data[0];
+} cistpl_funce_t;
+
+/*======================================================================
+
+    Modem Function Extension Tuples
+
+======================================================================*/
+
+#define CISTPL_FUNCE_SERIAL_IF		0x00
+#define CISTPL_FUNCE_SERIAL_CAP		0x01
+#define CISTPL_FUNCE_SERIAL_SERV_DATA	0x02
+#define CISTPL_FUNCE_SERIAL_SERV_FAX	0x03
+#define CISTPL_FUNCE_SERIAL_SERV_VOICE	0x04
+#define CISTPL_FUNCE_SERIAL_CAP_DATA	0x05
+#define CISTPL_FUNCE_SERIAL_CAP_FAX	0x06
+#define CISTPL_FUNCE_SERIAL_CAP_VOICE	0x07
+#define CISTPL_FUNCE_SERIAL_IF_DATA	0x08
+#define CISTPL_FUNCE_SERIAL_IF_FAX	0x09
+#define CISTPL_FUNCE_SERIAL_IF_VOICE	0x0a
+
+/* UART identification */
+#define CISTPL_SERIAL_UART_8250		0x00
+#define CISTPL_SERIAL_UART_16450	0x01
+#define CISTPL_SERIAL_UART_16550	0x02
+#define CISTPL_SERIAL_UART_8251		0x03
+#define CISTPL_SERIAL_UART_8530		0x04
+#define CISTPL_SERIAL_UART_85230	0x05
+
+/* UART capabilities */
+#define CISTPL_SERIAL_UART_SPACE	0x01
+#define CISTPL_SERIAL_UART_MARK		0x02
+#define CISTPL_SERIAL_UART_ODD		0x04
+#define CISTPL_SERIAL_UART_EVEN		0x08
+#define CISTPL_SERIAL_UART_5BIT		0x01
+#define CISTPL_SERIAL_UART_6BIT		0x02
+#define CISTPL_SERIAL_UART_7BIT		0x04
+#define CISTPL_SERIAL_UART_8BIT		0x08
+#define CISTPL_SERIAL_UART_1STOP	0x10
+#define CISTPL_SERIAL_UART_MSTOP	0x20
+#define CISTPL_SERIAL_UART_2STOP	0x40
+
+typedef struct cistpl_serial_t {
+    u_char	uart_type;
+    u_char	uart_cap_0;
+    u_char	uart_cap_1;
+} cistpl_serial_t;
+
+typedef struct cistpl_modem_cap_t {
+    u_char	flow;
+    u_char	cmd_buf;
+    u_char	rcv_buf_0, rcv_buf_1, rcv_buf_2;
+    u_char	xmit_buf_0, xmit_buf_1, xmit_buf_2;
+} cistpl_modem_cap_t;
+
+#define CISTPL_SERIAL_MOD_103		0x01
+#define CISTPL_SERIAL_MOD_V21		0x02
+#define CISTPL_SERIAL_MOD_V23		0x04
+#define CISTPL_SERIAL_MOD_V22		0x08
+#define CISTPL_SERIAL_MOD_212A		0x10
+#define CISTPL_SERIAL_MOD_V22BIS	0x20
+#define CISTPL_SERIAL_MOD_V26		0x40
+#define CISTPL_SERIAL_MOD_V26BIS	0x80
+#define CISTPL_SERIAL_MOD_V27BIS	0x01
+#define CISTPL_SERIAL_MOD_V29		0x02
+#define CISTPL_SERIAL_MOD_V32		0x04
+#define CISTPL_SERIAL_MOD_V32BIS	0x08
+#define CISTPL_SERIAL_MOD_V34		0x10
+
+#define CISTPL_SERIAL_ERR_MNP2_4	0x01
+#define CISTPL_SERIAL_ERR_V42_LAPM	0x02
+
+#define CISTPL_SERIAL_CMPR_V42BIS	0x01
+#define CISTPL_SERIAL_CMPR_MNP5		0x02
+
+#define CISTPL_SERIAL_CMD_AT1		0x01
+#define CISTPL_SERIAL_CMD_AT2		0x02
+#define CISTPL_SERIAL_CMD_AT3		0x04
+#define CISTPL_SERIAL_CMD_MNP_AT	0x08
+#define CISTPL_SERIAL_CMD_V25BIS	0x10
+#define CISTPL_SERIAL_CMD_V25A		0x20
+#define CISTPL_SERIAL_CMD_DMCL		0x40
+
+typedef struct cistpl_data_serv_t {
+    u_char	max_data_0;
+    u_char	max_data_1;
+    u_char	modulation_0;
+    u_char	modulation_1;
+    u_char	error_control;
+    u_char	compression;
+    u_char	cmd_protocol;
+    u_char	escape;
+    u_char	encrypt;
+    u_char	misc_features;
+    u_char	ccitt_code[0];
+} cistpl_data_serv_t;
+
+typedef struct cistpl_fax_serv_t {
+    u_char	max_data_0;
+    u_char	max_data_1;
+    u_char	modulation;
+    u_char	encrypt;
+    u_char	features_0;
+    u_char	features_1;
+    u_char	ccitt_code[0];
+} cistpl_fax_serv_t;
+
+typedef struct cistpl_voice_serv_t {
+    u_char	max_data_0;
+    u_char	max_data_1;
+} cistpl_voice_serv_t;
+
+/*======================================================================
+
+    LAN Function Extension Tuples
+
+======================================================================*/
+
+#define CISTPL_FUNCE_LAN_TECH		0x01
+#define CISTPL_FUNCE_LAN_SPEED		0x02
+#define CISTPL_FUNCE_LAN_MEDIA		0x03
+#define CISTPL_FUNCE_LAN_NODE_ID	0x04
+#define CISTPL_FUNCE_LAN_CONNECTOR	0x05
+
+/* LAN technologies */
+#define CISTPL_LAN_TECH_ARCNET		0x01
+#define CISTPL_LAN_TECH_ETHERNET	0x02
+#define CISTPL_LAN_TECH_TOKENRING	0x03
+#define CISTPL_LAN_TECH_LOCALTALK	0x04
+#define CISTPL_LAN_TECH_FDDI		0x05
+#define CISTPL_LAN_TECH_ATM		0x06
+#define CISTPL_LAN_TECH_WIRELESS	0x07
+
+typedef struct cistpl_lan_tech_t {
+    u_char	tech;
+} cistpl_lan_tech_t;
+
+typedef struct cistpl_lan_speed_t {
+    u_int	speed;
+} cistpl_lan_speed_t;
+
+/* LAN media definitions */
+#define CISTPL_LAN_MEDIA_UTP		0x01
+#define CISTPL_LAN_MEDIA_STP		0x02
+#define CISTPL_LAN_MEDIA_THIN_COAX	0x03
+#define CISTPL_LAN_MEDIA_THICK_COAX	0x04
+#define CISTPL_LAN_MEDIA_FIBER		0x05
+#define CISTPL_LAN_MEDIA_900MHZ		0x06
+#define CISTPL_LAN_MEDIA_2GHZ		0x07
+#define CISTPL_LAN_MEDIA_5GHZ		0x08
+#define CISTPL_LAN_MEDIA_DIFF_IR	0x09
+#define CISTPL_LAN_MEDIA_PTP_IR		0x0a
+
+typedef struct cistpl_lan_media_t {
+    u_char	media;
+} cistpl_lan_media_t;
+
+typedef struct cistpl_lan_node_id_t {
+    u_char	nb;
+    u_char	id[16];
+} cistpl_lan_node_id_t;
+
+typedef struct cistpl_lan_connector_t {
+    u_char	code;
+} cistpl_lan_connector_t;
+
+/*======================================================================
+
+    IDE Function Extension Tuples
+
+======================================================================*/
+
+#define CISTPL_IDE_INTERFACE		0x01
+
+typedef struct cistpl_ide_interface_t {
+    u_char	interface;
+} cistpl_ide_interface_t;
+
+/* First feature byte */
+#define CISTPL_IDE_SILICON		0x04
+#define CISTPL_IDE_UNIQUE		0x08
+#define CISTPL_IDE_DUAL			0x10
+
+/* Second feature byte */
+#define CISTPL_IDE_HAS_SLEEP		0x01
+#define CISTPL_IDE_HAS_STANDBY		0x02
+#define CISTPL_IDE_HAS_IDLE		0x04
+#define CISTPL_IDE_LOW_POWER		0x08
+#define CISTPL_IDE_REG_INHIBIT		0x10
+#define CISTPL_IDE_HAS_INDEX		0x20
+#define CISTPL_IDE_IOIS16		0x40
+
+typedef struct cistpl_ide_feature_t {
+    u_char	feature1;
+    u_char	feature2;
+} cistpl_ide_feature_t;
+
+#define CISTPL_FUNCE_IDE_IFACE		0x01
+#define CISTPL_FUNCE_IDE_MASTER		0x02
+#define CISTPL_FUNCE_IDE_SLAVE		0x03
+
+/*======================================================================
+
+    Configuration Table Entries
+
+======================================================================*/
+
+#define CISTPL_BAR_SPACE	0x07
+#define CISTPL_BAR_SPACE_IO	0x10
+#define CISTPL_BAR_PREFETCH	0x20
+#define CISTPL_BAR_CACHEABLE	0x40
+#define CISTPL_BAR_1MEG_MAP	0x80
+
+typedef struct cistpl_bar_t {
+    u_char	attr;
+    u_int	size;
+} cistpl_bar_t;
+
+typedef struct cistpl_config_t {
+    u_char	last_idx;
+    u_int	base;
+    u_int	rmask[4];
+    u_char	subtuples;
+} cistpl_config_t;
+
+/* These are bits in the 'present' field, and indices in 'param' */
+#define CISTPL_POWER_VNOM	0
+#define CISTPL_POWER_VMIN	1
+#define CISTPL_POWER_VMAX	2
+#define CISTPL_POWER_ISTATIC	3
+#define CISTPL_POWER_IAVG	4
+#define CISTPL_POWER_IPEAK	5
+#define CISTPL_POWER_IDOWN	6
+
+#define CISTPL_POWER_HIGHZ_OK	0x01
+#define CISTPL_POWER_HIGHZ_REQ	0x02
+
+typedef struct cistpl_power_t {
+    u_char	present;
+    u_char	flags;
+    u_int	param[7];
+} cistpl_power_t;
+
+typedef struct cistpl_timing_t {
+    u_int	wait, waitscale;
+    u_int	ready, rdyscale;
+    u_int	reserved, rsvscale;
+} cistpl_timing_t;
+
+#define CISTPL_IO_LINES_MASK	0x1f
+#define CISTPL_IO_8BIT		0x20
+#define CISTPL_IO_16BIT		0x40
+#define CISTPL_IO_RANGE		0x80
+
+#define CISTPL_IO_MAX_WIN	16
+
+typedef struct cistpl_io_t {
+    u_char	flags;
+    u_char	nwin;
+    struct {
+	u_int	base;
+	u_int	len;
+    } win[CISTPL_IO_MAX_WIN];
+} cistpl_io_t;
+
+typedef struct cistpl_irq_t {
+    u_int	IRQInfo1;
+    u_int	IRQInfo2;
+} cistpl_irq_t;
+
+#define CISTPL_MEM_MAX_WIN	8
+
+typedef struct cistpl_mem_t {
+    u_char	flags;
+    u_char	nwin;
+    struct {
+	u_int	len;
+	u_int	card_addr;
+	u_int	host_addr;
+    } win[CISTPL_MEM_MAX_WIN];
+} cistpl_mem_t;
+
+#define CISTPL_CFTABLE_DEFAULT		0x0001
+#define CISTPL_CFTABLE_BVDS		0x0002
+#define CISTPL_CFTABLE_WP		0x0004
+#define CISTPL_CFTABLE_RDYBSY		0x0008
+#define CISTPL_CFTABLE_MWAIT		0x0010
+#define CISTPL_CFTABLE_AUDIO		0x0800
+#define CISTPL_CFTABLE_READONLY		0x1000
+#define CISTPL_CFTABLE_PWRDOWN		0x2000
+
+typedef struct cistpl_cftable_entry_t {
+    u_char		index;
+    u_short		flags;
+    u_char		interface;
+    cistpl_power_t	vcc, vpp1, vpp2;
+    cistpl_timing_t	timing;
+    cistpl_io_t		io;
+    cistpl_irq_t	irq;
+    cistpl_mem_t	mem;
+    u_char		subtuples;
+} cistpl_cftable_entry_t;
+
+#define CISTPL_CFTABLE_MASTER		0x000100
+#define CISTPL_CFTABLE_INVALIDATE	0x000200
+#define CISTPL_CFTABLE_VGA_PALETTE	0x000400
+#define CISTPL_CFTABLE_PARITY		0x000800
+#define CISTPL_CFTABLE_WAIT		0x001000
+#define CISTPL_CFTABLE_SERR		0x002000
+#define CISTPL_CFTABLE_FAST_BACK	0x004000
+#define CISTPL_CFTABLE_BINARY_AUDIO	0x010000
+#define CISTPL_CFTABLE_PWM_AUDIO	0x020000
+
+typedef struct cistpl_cftable_entry_cb_t {
+    u_char		index;
+    u_int		flags;
+    cistpl_power_t	vcc, vpp1, vpp2;
+    u_char		io;
+    cistpl_irq_t	irq;
+    u_char		mem;
+    u_char		subtuples;
+} cistpl_cftable_entry_cb_t;
+
+typedef struct cistpl_device_geo_t {
+    u_char		ngeo;
+    struct {
+	u_char		buswidth;
+	u_int		erase_block;
+	u_int		read_block;
+	u_int		write_block;
+	u_int		partition;
+	u_int		interleave;
+    } geo[CISTPL_MAX_DEVICES];
+} cistpl_device_geo_t;
+
+typedef struct cistpl_vers_2_t {
+    u_char	vers;
+    u_char	comply;
+    u_short	dindex;
+    u_char	vspec8, vspec9;
+    u_char	nhdr;
+    u_char	vendor, info;
+    char	str[244];
+} cistpl_vers_2_t;
+
+typedef struct cistpl_org_t {
+    u_char	data_org;
+    char	desc[30];
+} cistpl_org_t;
+
+#define CISTPL_ORG_FS		0x00
+#define CISTPL_ORG_APPSPEC	0x01
+#define CISTPL_ORG_XIP		0x02
+
+typedef struct cistpl_format_t {
+    u_char	type;
+    u_char	edc;
+    u_int	offset;
+    u_int	length;
+} cistpl_format_t;
+
+#define CISTPL_FORMAT_DISK	0x00
+#define CISTPL_FORMAT_MEM	0x01
+
+#define CISTPL_EDC_NONE		0x00
+#define CISTPL_EDC_CKSUM	0x01
+#define CISTPL_EDC_CRC		0x02
+#define CISTPL_EDC_PCC		0x03
+
+typedef union cisparse_t {
+    cistpl_device_t		device;
+    cistpl_checksum_t		checksum;
+    cistpl_longlink_t		longlink;
+    cistpl_longlink_mfc_t	longlink_mfc;
+    cistpl_vers_1_t		version_1;
+    cistpl_altstr_t		altstr;
+    cistpl_jedec_t		jedec;
+    cistpl_manfid_t		manfid;
+    cistpl_funcid_t		funcid;
+    cistpl_funce_t		funce;
+    cistpl_bar_t		bar;
+    cistpl_config_t		config;
+    cistpl_cftable_entry_t	cftable_entry;
+    cistpl_cftable_entry_cb_t	cftable_entry_cb;
+    cistpl_device_geo_t		device_geo;
+    cistpl_vers_2_t		vers_2;
+    cistpl_org_t		org;
+    cistpl_format_t		format;
+} cisparse_t;
+
+typedef struct tuple_t {
+    u_int	Attributes;
+    cisdata_t 	DesiredTuple;
+    u_int	Flags;		/* internal use */
+    u_int	LinkOffset;	/* internal use */
+    u_int	CISOffset;	/* internal use */
+    cisdata_t	TupleCode;
+    cisdata_t	TupleLink;
+    cisdata_t	TupleOffset;
+    cisdata_t	TupleDataMax;
+    cisdata_t	TupleDataLen;
+    cisdata_t	*TupleData;
+} tuple_t;
+
+/* Special cisdata_t value */
+#define RETURN_FIRST_TUPLE	0xff
+
+/* Attributes for tuple calls */
+#define TUPLE_RETURN_LINK	0x01
+#define TUPLE_RETURN_COMMON	0x02
+
+#define CISTPL_MAX_CIS_SIZE	0x200
+
+#endif /* LINUX_CISTPL_H */
diff --git a/include/pcmcia/device_id.h b/include/pcmcia/device_id.h
new file mode 100644
index 00000000..00dbfac9
--- /dev/null
+++ b/include/pcmcia/device_id.h
@@ -0,0 +1,284 @@
+/*
+ * device_id.h -- PCMCIA driver matching helpers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (C) 2003 - 2004	David Woodhouse
+ * (C) 2003 - 2004	Dominik Brodowski
+ */
+
+#ifndef _LINUX_PCMCIA_DEVICE_ID_H
+#define _LINUX_PCMCIA_DEVICE_ID_H
+
+#ifdef __KERNEL__
+
+#define PCMCIA_DEVICE_MANF_CARD(manf, card) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_MANF_ID| \
+			PCMCIA_DEV_ID_MATCH_CARD_ID, \
+	.manf_id = (manf), \
+	.card_id = (card), }
+
+#define PCMCIA_DEVICE_FUNC_ID(func) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_FUNC_ID, \
+	.func_id = (func), }
+
+#define PCMCIA_DEVICE_PROD_ID1(v1, vh1) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1, \
+	.prod_id = { (v1), NULL, NULL, NULL }, \
+	.prod_id_hash = { (vh1), 0, 0, 0 }, }
+
+#define PCMCIA_DEVICE_PROD_ID2(v2, vh2) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID2, \
+	.prod_id = { NULL, (v2), NULL, NULL },  \
+	.prod_id_hash = { 0, (vh2), 0, 0 }, }
+
+#define PCMCIA_DEVICE_PROD_ID3(v3, vh3) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID3, \
+	.prod_id = { NULL, NULL, (v3), NULL },  \
+	.prod_id_hash = { 0, 0, (vh3), 0 }, }
+
+#define PCMCIA_DEVICE_PROD_ID12(v1, v2, vh1, vh2) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID2, \
+	.prod_id = { (v1), (v2), NULL, NULL }, \
+	.prod_id_hash = { (vh1), (vh2), 0, 0 }, }
+
+#define PCMCIA_DEVICE_PROD_ID13(v1, v3, vh1, vh3) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID3, \
+	.prod_id = { (v1), NULL, (v3), NULL }, \
+	.prod_id_hash = { (vh1), 0, (vh3), 0 }, }
+
+#define PCMCIA_DEVICE_PROD_ID14(v1, v4, vh1, vh4) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID4, \
+	.prod_id = { (v1), NULL, NULL, (v4) }, \
+	.prod_id_hash = { (vh1), 0, 0, (vh4) }, }
+
+#define PCMCIA_DEVICE_PROD_ID123(v1, v2, v3, vh1, vh2, vh3) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID2| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID3, \
+	.prod_id = { (v1), (v2), (v3), NULL },\
+	.prod_id_hash = { (vh1), (vh2), (vh3), 0 }, }
+
+#define PCMCIA_DEVICE_PROD_ID124(v1, v2, v4, vh1, vh2, vh4) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID2| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID4, \
+	.prod_id = { (v1), (v2), NULL, (v4) }, \
+	.prod_id_hash = { (vh1), (vh2), 0, (vh4) }, }
+
+#define PCMCIA_DEVICE_PROD_ID134(v1, v3, v4, vh1, vh3, vh4) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID3| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID4, \
+	.prod_id = { (v1), NULL, (v3), (v4) }, \
+	.prod_id_hash = { (vh1), 0, (vh3), (vh4) }, }
+
+#define PCMCIA_DEVICE_PROD_ID1234(v1, v2, v3, v4, vh1, vh2, vh3, vh4) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID2| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID3| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID4, \
+	.prod_id = { (v1), (v2), (v3), (v4) }, \
+	.prod_id_hash = { (vh1), (vh2), (vh3), (vh4) }, }
+
+#define PCMCIA_DEVICE_MANF_CARD_PROD_ID1(manf, card, v1, vh1) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_MANF_ID| \
+			PCMCIA_DEV_ID_MATCH_CARD_ID| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID1, \
+	.manf_id = (manf), \
+	.card_id = (card), \
+	.prod_id = { (v1), NULL, NULL, NULL }, \
+	.prod_id_hash = { (vh1), 0, 0, 0 }, }
+
+#define PCMCIA_DEVICE_MANF_CARD_PROD_ID3(manf, card, v3, vh3) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_MANF_ID| \
+			PCMCIA_DEV_ID_MATCH_CARD_ID| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID3, \
+	.manf_id = (manf), \
+	.card_id = (card), \
+	.prod_id = { NULL, NULL, (v3), NULL }, \
+	.prod_id_hash = { 0, 0, (vh3), 0 }, }
+
+
+/* multi-function devices */
+
+#define PCMCIA_MFC_DEVICE_MANF_CARD(mfc, manf, card) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_MANF_ID| \
+			PCMCIA_DEV_ID_MATCH_CARD_ID| \
+			PCMCIA_DEV_ID_MATCH_FUNCTION, \
+	.manf_id = (manf), \
+	.card_id = (card), \
+	.function = (mfc), }
+
+#define PCMCIA_MFC_DEVICE_PROD_ID1(mfc, v1, vh1) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_FUNCTION, \
+	.prod_id = { (v1), NULL, NULL, NULL }, \
+	.prod_id_hash = { (vh1), 0, 0, 0 }, \
+	.function = (mfc), }
+
+#define PCMCIA_MFC_DEVICE_PROD_ID2(mfc, v2, vh2) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID2| \
+			PCMCIA_DEV_ID_MATCH_FUNCTION, \
+	.prod_id = { NULL, (v2), NULL, NULL },  \
+	.prod_id_hash = { 0, (vh2), 0, 0 }, \
+	.function = (mfc), }
+
+#define PCMCIA_MFC_DEVICE_PROD_ID12(mfc, v1, v2, vh1, vh2) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID2| \
+			PCMCIA_DEV_ID_MATCH_FUNCTION, \
+	.prod_id = { (v1), (v2), NULL, NULL }, \
+	.prod_id_hash = { (vh1), (vh2), 0, 0 }, \
+	.function = (mfc), }
+
+#define PCMCIA_MFC_DEVICE_PROD_ID13(mfc, v1, v3, vh1, vh3) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID3| \
+			PCMCIA_DEV_ID_MATCH_FUNCTION, \
+	.prod_id = { (v1), NULL, (v3), NULL }, \
+	.prod_id_hash = { (vh1), 0, (vh3), 0 }, \
+	.function = (mfc), }
+
+#define PCMCIA_MFC_DEVICE_PROD_ID123(mfc, v1, v2, v3, vh1, vh2, vh3) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID2| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID3| \
+			PCMCIA_DEV_ID_MATCH_FUNCTION, \
+	.prod_id = { (v1), (v2), (v3), NULL },\
+	.prod_id_hash = { (vh1), (vh2), (vh3), 0 }, \
+	.function = (mfc), }
+
+/* pseudo multi-function devices */
+
+#define PCMCIA_PFC_DEVICE_MANF_CARD(mfc, manf, card) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_MANF_ID| \
+			PCMCIA_DEV_ID_MATCH_CARD_ID| \
+			PCMCIA_DEV_ID_MATCH_DEVICE_NO, \
+	.manf_id = (manf), \
+	.card_id = (card), \
+	.device_no = (mfc), }
+
+#define PCMCIA_PFC_DEVICE_PROD_ID1(mfc, v1, vh1) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_DEVICE_NO, \
+	.prod_id = { (v1), NULL, NULL, NULL }, \
+	.prod_id_hash = { (vh1), 0, 0, 0 }, \
+	.device_no = (mfc), }
+
+#define PCMCIA_PFC_DEVICE_PROD_ID2(mfc, v2, vh2) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID2| \
+			PCMCIA_DEV_ID_MATCH_DEVICE_NO, \
+	.prod_id = { NULL, (v2), NULL, NULL },  \
+	.prod_id_hash = { 0, (vh2), 0, 0 }, \
+	.device_no = (mfc), }
+
+#define PCMCIA_PFC_DEVICE_PROD_ID12(mfc, v1, v2, vh1, vh2) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID2| \
+			PCMCIA_DEV_ID_MATCH_DEVICE_NO, \
+	.prod_id = { (v1), (v2), NULL, NULL }, \
+	.prod_id_hash = { (vh1), (vh2), 0, 0 }, \
+	.device_no = (mfc), }
+
+#define PCMCIA_PFC_DEVICE_PROD_ID13(mfc, v1, v3, vh1, vh3) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID3| \
+			PCMCIA_DEV_ID_MATCH_DEVICE_NO, \
+	.prod_id = { (v1), NULL, (v3), NULL }, \
+	.prod_id_hash = { (vh1), 0, (vh3), 0 }, \
+	.device_no = (mfc), }
+
+#define PCMCIA_PFC_DEVICE_PROD_ID123(mfc, v1, v2, v3, vh1, vh2, vh3) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID2| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID3| \
+			PCMCIA_DEV_ID_MATCH_DEVICE_NO, \
+	.prod_id = { (v1), (v2), (v3), NULL },\
+	.prod_id_hash = { (vh1), (vh2), (vh3), 0 }, \
+	.device_no = (mfc), }
+
+/* cards needing a CIS override */
+
+#define PCMCIA_DEVICE_CIS_MANF_CARD(manf, card, _cisfile) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_FAKE_CIS | \
+			PCMCIA_DEV_ID_MATCH_MANF_ID| \
+			PCMCIA_DEV_ID_MATCH_CARD_ID, \
+	.manf_id = (manf), \
+	.card_id = (card), \
+	.cisfile = (_cisfile)}
+
+#define PCMCIA_DEVICE_CIS_PROD_ID12(v1, v2, vh1, vh2, _cisfile) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_FAKE_CIS | \
+			PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID2, \
+	.prod_id = { (v1), (v2), NULL, NULL }, \
+	.prod_id_hash = { (vh1), (vh2), 0, 0 }, \
+	.cisfile = (_cisfile)}
+
+#define PCMCIA_DEVICE_CIS_PROD_ID123(v1, v2, v3, vh1, vh2, vh3, _cisfile) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_FAKE_CIS | \
+			PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID2| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID3, \
+	.prod_id = { (v1), (v2), (v3), NULL },\
+	.prod_id_hash = { (vh1), (vh2), (vh3), 0 }, \
+	.cisfile = (_cisfile)}
+
+
+#define PCMCIA_DEVICE_CIS_PROD_ID2(v2, vh2, _cisfile) { \
+	.match_flags =  PCMCIA_DEV_ID_MATCH_FAKE_CIS | \
+			PCMCIA_DEV_ID_MATCH_PROD_ID2, \
+	.prod_id = { NULL, (v2), NULL, NULL },  \
+	.prod_id_hash = { 0, (vh2), 0, 0 }, \
+	.cisfile = (_cisfile)}
+
+#define PCMCIA_PFC_DEVICE_CIS_PROD_ID12(mfc, v1, v2, vh1, vh2, _cisfile) { \
+	.match_flags =  PCMCIA_DEV_ID_MATCH_FAKE_CIS | \
+			PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID2| \
+			PCMCIA_DEV_ID_MATCH_DEVICE_NO, \
+	.prod_id = { (v1), (v2), NULL, NULL }, \
+	.prod_id_hash = { (vh1), (vh2), 0, 0 },\
+	.device_no = (mfc), \
+	.cisfile = (_cisfile)}
+
+#define PCMCIA_MFC_DEVICE_CIS_MANF_CARD(mfc, manf, card, _cisfile) { \
+	.match_flags =  PCMCIA_DEV_ID_MATCH_FAKE_CIS | \
+			PCMCIA_DEV_ID_MATCH_MANF_ID| \
+			PCMCIA_DEV_ID_MATCH_CARD_ID| \
+			PCMCIA_DEV_ID_MATCH_FUNCTION, \
+	.manf_id = (manf), \
+	.card_id = (card), \
+	.function = (mfc), \
+	.cisfile = (_cisfile)}
+
+#define PCMCIA_MFC_DEVICE_CIS_PROD_ID12(mfc, v1, v2, vh1, vh2, _cisfile) { \
+	.match_flags =  PCMCIA_DEV_ID_MATCH_FAKE_CIS | \
+			PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID2| \
+			PCMCIA_DEV_ID_MATCH_FUNCTION, \
+	.prod_id = { (v1), (v2), NULL, NULL }, \
+	.prod_id_hash = { (vh1), (vh2), 0, 0 }, \
+	.function = (mfc), \
+	.cisfile = (_cisfile)}
+
+#define PCMCIA_MFC_DEVICE_CIS_PROD_ID4(mfc, v4, vh4, _cisfile) { \
+	.match_flags =  PCMCIA_DEV_ID_MATCH_FAKE_CIS | \
+			PCMCIA_DEV_ID_MATCH_PROD_ID4| \
+			PCMCIA_DEV_ID_MATCH_FUNCTION, \
+	.prod_id = { NULL, NULL, NULL, (v4) }, \
+	.prod_id_hash = { 0, 0, 0, (vh4) }, \
+	.function = (mfc), \
+	.cisfile = (_cisfile)}
+
+
+#define PCMCIA_DEVICE_NULL { .match_flags = 0, }
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_PCMCIA_DEVICE_ID_H */
diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h
new file mode 100644
index 00000000..3bbbd78e
--- /dev/null
+++ b/include/pcmcia/ds.h
@@ -0,0 +1,275 @@
+/*
+ * ds.h -- 16-bit PCMCIA core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The initial developer of the original code is David A. Hinds
+ * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
+ * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
+ *
+ * (C) 1999		David A. Hinds
+ * (C) 2003 - 2008	Dominik Brodowski
+ */
+
+#ifndef _LINUX_DS_H
+#define _LINUX_DS_H
+
+#ifdef __KERNEL__
+#include <linux/mod_devicetable.h>
+#endif
+
+#include <pcmcia/device_id.h>
+
+#ifdef __KERNEL__
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <pcmcia/ss.h>
+#include <linux/atomic.h>
+
+
+/*
+ * PCMCIA device drivers (16-bit cards only; 32-bit cards require CardBus
+ * a.k.a. PCI drivers
+ */
+struct pcmcia_socket;
+struct pcmcia_device;
+struct config_t;
+struct net_device;
+
+/* dynamic device IDs for PCMCIA device drivers. See
+ * Documentation/pcmcia/driver.txt for details.
+*/
+struct pcmcia_dynids {
+	struct mutex		lock;
+	struct list_head	list;
+};
+
+struct pcmcia_driver {
+	const char		*name;
+
+	int (*probe)		(struct pcmcia_device *dev);
+	void (*remove)		(struct pcmcia_device *dev);
+
+	int (*suspend)		(struct pcmcia_device *dev);
+	int (*resume)		(struct pcmcia_device *dev);
+
+	struct module		*owner;
+	const struct pcmcia_device_id	*id_table;
+	struct device_driver	drv;
+	struct pcmcia_dynids	dynids;
+};
+
+/* driver registration */
+int pcmcia_register_driver(struct pcmcia_driver *driver);
+void pcmcia_unregister_driver(struct pcmcia_driver *driver);
+
+/* for struct resource * array embedded in struct pcmcia_device */
+enum {
+	PCMCIA_IOPORT_0,
+	PCMCIA_IOPORT_1,
+	PCMCIA_IOMEM_0,
+	PCMCIA_IOMEM_1,
+	PCMCIA_IOMEM_2,
+	PCMCIA_IOMEM_3,
+	PCMCIA_NUM_RESOURCES,
+};
+
+struct pcmcia_device {
+	/* the socket and the device_no [for multifunction devices]
+	   uniquely define a pcmcia_device */
+	struct pcmcia_socket	*socket;
+
+	char			*devname;
+
+	u8			device_no;
+
+	/* the hardware "function" device; certain subdevices can
+	 * share one hardware "function" device. */
+	u8			func;
+	struct config_t		*function_config;
+
+	struct list_head	socket_device_list;
+
+	/* device setup */
+	unsigned int		irq;
+	struct resource		*resource[PCMCIA_NUM_RESOURCES];
+	resource_size_t		card_addr;	/* for the 1st IOMEM resource */
+	unsigned int		vpp;
+
+	unsigned int		config_flags;	/* CONF_ENABLE_ flags below */
+	unsigned int		config_base;
+	unsigned int		config_index;
+	unsigned int		config_regs;	/* PRESENT_ flags below */
+	unsigned int		io_lines;	/* number of I/O lines */
+
+	/* Is the device suspended? */
+	u16			suspended:1;
+
+	/* Flags whether io, irq, win configurations were
+	 * requested, and whether the configuration is "locked" */
+	u16			_irq:1;
+	u16			_io:1;
+	u16			_win:4;
+	u16			_locked:1;
+
+	/* Flag whether a "fuzzy" func_id based match is
+	 * allowed. */
+	u16			allow_func_id_match:1;
+
+	/* information about this device */
+	u16			has_manf_id:1;
+	u16			has_card_id:1;
+	u16			has_func_id:1;
+
+	u16			reserved:4;
+
+	u8			func_id;
+	u16			manf_id;
+	u16			card_id;
+
+	char			*prod_id[4];
+
+	u64			dma_mask;
+	struct device		dev;
+
+	/* data private to drivers */
+	void			*priv;
+	unsigned int		open;
+};
+
+#define to_pcmcia_dev(n) container_of(n, struct pcmcia_device, dev)
+#define to_pcmcia_drv(n) container_of(n, struct pcmcia_driver, drv)
+
+
+/*
+ * CIS access.
+ *
+ * Please use the following functions to access CIS tuples:
+ * - pcmcia_get_tuple()
+ * - pcmcia_loop_tuple()
+ * - pcmcia_get_mac_from_cis()
+ *
+ * To parse a tuple_t, pcmcia_parse_tuple() exists. Its interface
+ * might change in future.
+ */
+
+/* get the very first CIS entry of type @code. Note that buf is pointer
+ * to u8 *buf; and that you need to kfree(buf) afterwards. */
+size_t pcmcia_get_tuple(struct pcmcia_device *p_dev, cisdata_t code,
+			u8 **buf);
+
+/* loop over CIS entries */
+int pcmcia_loop_tuple(struct pcmcia_device *p_dev, cisdata_t code,
+		      int (*loop_tuple) (struct pcmcia_device *p_dev,
+					 tuple_t *tuple,
+					 void *priv_data),
+		      void *priv_data);
+
+/* get the MAC address from CISTPL_FUNCE */
+int pcmcia_get_mac_from_cis(struct pcmcia_device *p_dev,
+			    struct net_device *dev);
+
+
+/* parse a tuple_t */
+int pcmcia_parse_tuple(tuple_t *tuple, cisparse_t *parse);
+
+/* loop CIS entries for valid configuration */
+int pcmcia_loop_config(struct pcmcia_device *p_dev,
+		       int	(*conf_check)	(struct pcmcia_device *p_dev,
+						 void *priv_data),
+		       void *priv_data);
+
+/* is the device still there? */
+struct pcmcia_device *pcmcia_dev_present(struct pcmcia_device *p_dev);
+
+/* low-level interface reset */
+int pcmcia_reset_card(struct pcmcia_socket *skt);
+
+/* CIS config */
+int pcmcia_read_config_byte(struct pcmcia_device *p_dev, off_t where, u8 *val);
+int pcmcia_write_config_byte(struct pcmcia_device *p_dev, off_t where, u8 val);
+
+/* device configuration */
+int pcmcia_request_io(struct pcmcia_device *p_dev);
+
+int __must_check
+__pcmcia_request_exclusive_irq(struct pcmcia_device *p_dev,
+				irq_handler_t handler);
+static inline __must_check __deprecated int
+pcmcia_request_exclusive_irq(struct pcmcia_device *p_dev,
+				irq_handler_t handler)
+{
+	return __pcmcia_request_exclusive_irq(p_dev, handler);
+}
+
+int __must_check pcmcia_request_irq(struct pcmcia_device *p_dev,
+				irq_handler_t handler);
+
+int pcmcia_enable_device(struct pcmcia_device *p_dev);
+
+int pcmcia_request_window(struct pcmcia_device *p_dev, struct resource *res,
+			unsigned int speed);
+int pcmcia_release_window(struct pcmcia_device *p_dev, struct resource *res);
+int pcmcia_map_mem_page(struct pcmcia_device *p_dev, struct resource *res,
+			unsigned int offset);
+
+int pcmcia_fixup_vpp(struct pcmcia_device *p_dev, unsigned char new_vpp);
+int pcmcia_fixup_iowidth(struct pcmcia_device *p_dev);
+
+void pcmcia_disable_device(struct pcmcia_device *p_dev);
+
+/* IO ports */
+#define IO_DATA_PATH_WIDTH	0x18
+#define IO_DATA_PATH_WIDTH_8	0x00
+#define IO_DATA_PATH_WIDTH_16	0x08
+#define IO_DATA_PATH_WIDTH_AUTO	0x10
+
+/* IO memory */
+#define WIN_MEMORY_TYPE_CM	0x00 /* default */
+#define WIN_MEMORY_TYPE_AM	0x20 /* MAP_ATTRIB */
+#define WIN_DATA_WIDTH_8	0x00 /* default */
+#define WIN_DATA_WIDTH_16	0x02 /* MAP_16BIT */
+#define WIN_ENABLE		0x01 /* MAP_ACTIVE */
+#define WIN_USE_WAIT		0x40 /* MAP_USE_WAIT */
+
+#define WIN_FLAGS_MAP		0x63 /* MAP_ATTRIB | MAP_16BIT | MAP_ACTIVE |
+					MAP_USE_WAIT */
+#define WIN_FLAGS_REQ		0x1c /* mapping to socket->win[i]:
+					0x04 -> 0
+					0x08 -> 1
+					0x0c -> 2
+					0x10 -> 3 */
+
+/* config_reg{ister}s present for this PCMCIA device */
+#define PRESENT_OPTION		0x001
+#define PRESENT_STATUS		0x002
+#define PRESENT_PIN_REPLACE	0x004
+#define PRESENT_COPY		0x008
+#define PRESENT_EXT_STATUS	0x010
+#define PRESENT_IOBASE_0	0x020
+#define PRESENT_IOBASE_1	0x040
+#define PRESENT_IOBASE_2	0x080
+#define PRESENT_IOBASE_3	0x100
+#define PRESENT_IOSIZE		0x200
+
+/* flags to be passed to pcmcia_enable_device() */
+#define CONF_ENABLE_IRQ         0x0001
+#define CONF_ENABLE_SPKR        0x0002
+#define CONF_ENABLE_PULSE_IRQ   0x0004
+#define CONF_ENABLE_ESR         0x0008
+#define CONF_ENABLE_IOCARD	0x0010 /* auto-enabled if IO resources or IRQ
+					* (CONF_ENABLE_IRQ) in use */
+#define CONF_ENABLE_ZVCARD	0x0020
+
+/* flags used by pcmcia_loop_config() autoconfiguration */
+#define CONF_AUTO_CHECK_VCC	0x0100 /* check for matching Vcc? */
+#define CONF_AUTO_SET_VPP	0x0200 /* set Vpp? */
+#define CONF_AUTO_AUDIO		0x0400 /* enable audio line? */
+#define CONF_AUTO_SET_IO	0x0800 /* set ->resource[0,1] */
+#define CONF_AUTO_SET_IOMEM	0x1000 /* set ->resource[2] */
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_DS_H */
diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h
new file mode 100644
index 00000000..731cde01
--- /dev/null
+++ b/include/pcmcia/ss.h
@@ -0,0 +1,266 @@
+/*
+ * ss.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The initial developer of the original code is David A. Hinds
+ * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
+ * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
+ *
+ * (C) 1999             David A. Hinds
+ */
+
+#ifndef _LINUX_SS_H
+#define _LINUX_SS_H
+
+#include <linux/device.h>
+#include <linux/sched.h>	/* task_struct, completion */
+#include <linux/mutex.h>
+
+#ifdef CONFIG_CARDBUS
+#include <linux/pci.h>
+#endif
+
+/* Definitions for card status flags for GetStatus */
+#define SS_WRPROT	0x0001
+#define SS_CARDLOCK	0x0002
+#define SS_EJECTION	0x0004
+#define SS_INSERTION	0x0008
+#define SS_BATDEAD	0x0010
+#define SS_BATWARN	0x0020
+#define SS_READY	0x0040
+#define SS_DETECT	0x0080
+#define SS_POWERON	0x0100
+#define SS_GPI		0x0200
+#define SS_STSCHG	0x0400
+#define SS_CARDBUS	0x0800
+#define SS_3VCARD	0x1000
+#define SS_XVCARD	0x2000
+#define SS_PENDING	0x4000
+#define SS_ZVCARD	0x8000
+
+/* InquireSocket capabilities */
+#define SS_CAP_PAGE_REGS	0x0001
+#define SS_CAP_VIRTUAL_BUS	0x0002
+#define SS_CAP_MEM_ALIGN	0x0004
+#define SS_CAP_STATIC_MAP	0x0008
+#define SS_CAP_PCCARD		0x4000
+#define SS_CAP_CARDBUS		0x8000
+
+/* for GetSocket, SetSocket */
+typedef struct socket_state_t {
+	u_int	flags;
+	u_int	csc_mask;
+	u_char	Vcc, Vpp;
+	u_char	io_irq;
+} socket_state_t;
+
+extern socket_state_t dead_socket;
+
+/* Socket configuration flags */
+#define SS_PWR_AUTO	0x0010
+#define SS_IOCARD	0x0020
+#define SS_RESET	0x0040
+#define SS_DMA_MODE	0x0080
+#define SS_SPKR_ENA	0x0100
+#define SS_OUTPUT_ENA	0x0200
+
+/* Flags for I/O port and memory windows */
+#define MAP_ACTIVE	0x01
+#define MAP_16BIT	0x02
+#define MAP_AUTOSZ	0x04
+#define MAP_0WS		0x08
+#define MAP_WRPROT	0x10
+#define MAP_ATTRIB	0x20
+#define MAP_USE_WAIT	0x40
+#define MAP_PREFETCH	0x80
+
+/* Use this just for bridge windows */
+#define MAP_IOSPACE	0x20
+
+/* power hook operations */
+#define HOOK_POWER_PRE	0x01
+#define HOOK_POWER_POST	0x02
+
+typedef struct pccard_io_map {
+	u_char	map;
+	u_char	flags;
+	u_short	speed;
+	phys_addr_t start, stop;
+} pccard_io_map;
+
+typedef struct pccard_mem_map {
+	u_char		map;
+	u_char		flags;
+	u_short		speed;
+	phys_addr_t	static_start;
+	u_int		card_start;
+	struct resource	*res;
+} pccard_mem_map;
+
+typedef struct io_window_t {
+	u_int			InUse, Config;
+	struct resource		*res;
+} io_window_t;
+
+/* Maximum number of IO windows per socket */
+#define MAX_IO_WIN 2
+
+/* Maximum number of memory windows per socket */
+#define MAX_WIN 4
+
+
+/*
+ * Socket operations.
+ */
+struct pcmcia_socket;
+struct pccard_resource_ops;
+struct config_t;
+struct pcmcia_callback;
+struct user_info_t;
+
+struct pccard_operations {
+	int (*init)(struct pcmcia_socket *s);
+	int (*suspend)(struct pcmcia_socket *s);
+	int (*get_status)(struct pcmcia_socket *s, u_int *value);
+	int (*set_socket)(struct pcmcia_socket *s, socket_state_t *state);
+	int (*set_io_map)(struct pcmcia_socket *s, struct pccard_io_map *io);
+	int (*set_mem_map)(struct pcmcia_socket *s, struct pccard_mem_map *mem);
+};
+
+struct pcmcia_socket {
+	struct module			*owner;
+	socket_state_t			socket;
+	u_int				state;
+	u_int				suspended_state;	/* state before suspend */
+	u_short				functions;
+	u_short				lock_count;
+	pccard_mem_map			cis_mem;
+	void __iomem 			*cis_virt;
+	io_window_t			io[MAX_IO_WIN];
+	pccard_mem_map			win[MAX_WIN];
+	struct list_head		cis_cache;
+	size_t				fake_cis_len;
+	u8				*fake_cis;
+
+	struct list_head		socket_list;
+	struct completion		socket_released;
+
+	/* deprecated */
+	unsigned int			sock;		/* socket number */
+
+
+	/* socket capabilities */
+	u_int				features;
+	u_int				irq_mask;
+	u_int				map_size;
+	u_int				io_offset;
+	u_int				pci_irq;
+	struct pci_dev			*cb_dev;
+
+	/* socket setup is done so resources should be able to be allocated.
+	 * Only if set to 1, calls to find_{io,mem}_region are handled, and
+	 * insertio events are actually managed by the PCMCIA layer.*/
+	u8				resource_setup_done;
+
+	/* socket operations */
+	struct pccard_operations	*ops;
+	struct pccard_resource_ops	*resource_ops;
+	void				*resource_data;
+
+	/* Zoom video behaviour is so chip specific its not worth adding
+	   this to _ops */
+	void 				(*zoom_video)(struct pcmcia_socket *,
+						      int);
+
+	/* so is power hook */
+	int (*power_hook)(struct pcmcia_socket *sock, int operation);
+
+	/* allows tuning the CB bridge before loading driver for the CB card */
+#ifdef CONFIG_CARDBUS
+	void (*tune_bridge)(struct pcmcia_socket *sock, struct pci_bus *bus);
+#endif
+
+	/* state thread */
+	struct task_struct		*thread;
+	struct completion		thread_done;
+	unsigned int			thread_events;
+	unsigned int			sysfs_events;
+
+	/* For the non-trivial interaction between these locks,
+	 * see Documentation/pcmcia/locking.txt */
+	struct mutex			skt_mutex;
+	struct mutex			ops_mutex;
+
+	/* protects thread_events and sysfs_events */
+	spinlock_t			thread_lock;
+
+	/* pcmcia (16-bit) */
+	struct pcmcia_callback		*callback;
+
+#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
+	/* The following elements refer to 16-bit PCMCIA devices inserted
+	 * into the socket */
+	struct list_head		devices_list;
+
+	/* the number of devices, used only internally and subject to
+	 * incorrectness and change */
+	u8				device_count;
+
+	/* does the PCMCIA card consist of two pseudo devices? */
+	u8				pcmcia_pfc;
+
+	/* non-zero if PCMCIA card is present */
+	atomic_t			present;
+
+	/* IRQ to be used by PCMCIA devices. May not be IRQ 0. */
+	unsigned int			pcmcia_irq;
+
+#endif /* CONFIG_PCMCIA */
+
+	/* socket device */
+	struct device			dev;
+	/* data internal to the socket driver */
+	void				*driver_data;
+	/* status of the card during resume from a system sleep state */
+	int				resume_status;
+};
+
+
+/* socket drivers must define the resource operations type they use. There
+ * are three options:
+ * - pccard_static_ops		iomem and ioport areas are assigned statically
+ * - pccard_iodyn_ops		iomem areas is assigned statically, ioport
+ *				areas dynamically
+ *				If this option is selected, use
+ *				"select PCCARD_IODYN" in Kconfig.
+ * - pccard_nonstatic_ops	iomem and ioport areas are assigned dynamically.
+ *				If this option is selected, use
+ *				"select PCCARD_NONSTATIC" in Kconfig.
+ *
+ */
+extern struct pccard_resource_ops pccard_static_ops;
+#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
+extern struct pccard_resource_ops pccard_iodyn_ops;
+extern struct pccard_resource_ops pccard_nonstatic_ops;
+#else
+/* If PCMCIA is not used, but only CARDBUS, these functions are not used
+ * at all. Therefore, do not use the large (240K!) rsrc_nonstatic module
+ */
+#define pccard_iodyn_ops pccard_static_ops
+#define pccard_nonstatic_ops pccard_static_ops
+#endif
+
+
+/* socket drivers use this callback in their IRQ handler */
+extern void pcmcia_parse_events(struct pcmcia_socket *socket,
+				unsigned int events);
+
+/* to register and unregister a socket */
+extern int pcmcia_register_socket(struct pcmcia_socket *socket);
+extern void pcmcia_unregister_socket(struct pcmcia_socket *socket);
+
+
+#endif /* _LINUX_SS_H */
diff --git a/include/rdma/Kbuild b/include/rdma/Kbuild
new file mode 100644
index 00000000..ea56f76c
--- /dev/null
+++ b/include/rdma/Kbuild
@@ -0,0 +1,6 @@
+header-y += ib_user_cm.h
+header-y += ib_user_mad.h
+header-y += ib_user_sa.h
+header-y += ib_user_verbs.h
+header-y += rdma_netlink.h
+header-y += rdma_user_cm.h
diff --git a/include/rdma/ib_addr.h b/include/rdma/ib_addr.h
new file mode 100644
index 00000000..99965395
--- /dev/null
+++ b/include/rdma/ib_addr.h
@@ -0,0 +1,287 @@
+/*
+ * Copyright (c) 2005 Voltaire Inc.  All rights reserved.
+ * Copyright (c) 2005 Intel Corporation.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#if !defined(IB_ADDR_H)
+#define IB_ADDR_H
+
+#include <linux/in.h>
+#include <linux/in6.h>
+#include <linux/if_arp.h>
+#include <linux/netdevice.h>
+#include <linux/socket.h>
+#include <linux/if_vlan.h>
+#include <rdma/ib_verbs.h>
+#include <rdma/ib_pack.h>
+
+struct rdma_addr_client {
+	atomic_t refcount;
+	struct completion comp;
+};
+
+/**
+ * rdma_addr_register_client - Register an address client.
+ */
+void rdma_addr_register_client(struct rdma_addr_client *client);
+
+/**
+ * rdma_addr_unregister_client - Deregister an address client.
+ * @client: Client object to deregister.
+ */
+void rdma_addr_unregister_client(struct rdma_addr_client *client);
+
+struct rdma_dev_addr {
+	unsigned char src_dev_addr[MAX_ADDR_LEN];
+	unsigned char dst_dev_addr[MAX_ADDR_LEN];
+	unsigned char broadcast[MAX_ADDR_LEN];
+	unsigned short dev_type;
+	int bound_dev_if;
+	enum rdma_transport_type transport;
+};
+
+/**
+ * rdma_translate_ip - Translate a local IP address to an RDMA hardware
+ *   address.
+ */
+int rdma_translate_ip(struct sockaddr *addr, struct rdma_dev_addr *dev_addr);
+
+/**
+ * rdma_resolve_ip - Resolve source and destination IP addresses to
+ *   RDMA hardware addresses.
+ * @client: Address client associated with request.
+ * @src_addr: An optional source address to use in the resolution.  If a
+ *   source address is not provided, a usable address will be returned via
+ *   the callback.
+ * @dst_addr: The destination address to resolve.
+ * @addr: A reference to a data location that will receive the resolved
+ *   addresses.  The data location must remain valid until the callback has
+ *   been invoked.
+ * @timeout_ms: Amount of time to wait for the address resolution to complete.
+ * @callback: Call invoked once address resolution has completed, timed out,
+ *   or been canceled.  A status of 0 indicates success.
+ * @context: User-specified context associated with the call.
+ */
+int rdma_resolve_ip(struct rdma_addr_client *client,
+		    struct sockaddr *src_addr, struct sockaddr *dst_addr,
+		    struct rdma_dev_addr *addr, int timeout_ms,
+		    void (*callback)(int status, struct sockaddr *src_addr,
+				     struct rdma_dev_addr *addr, void *context),
+		    void *context);
+
+void rdma_addr_cancel(struct rdma_dev_addr *addr);
+
+int rdma_copy_addr(struct rdma_dev_addr *dev_addr, struct net_device *dev,
+	      const unsigned char *dst_dev_addr);
+
+static inline int ip_addr_size(struct sockaddr *addr)
+{
+	return addr->sa_family == AF_INET6 ?
+	       sizeof(struct sockaddr_in6) : sizeof(struct sockaddr_in);
+}
+
+static inline u16 ib_addr_get_pkey(struct rdma_dev_addr *dev_addr)
+{
+	return ((u16)dev_addr->broadcast[8] << 8) | (u16)dev_addr->broadcast[9];
+}
+
+static inline void ib_addr_set_pkey(struct rdma_dev_addr *dev_addr, u16 pkey)
+{
+	dev_addr->broadcast[8] = pkey >> 8;
+	dev_addr->broadcast[9] = (unsigned char) pkey;
+}
+
+static inline void ib_addr_get_mgid(struct rdma_dev_addr *dev_addr,
+				    union ib_gid *gid)
+{
+	memcpy(gid, dev_addr->broadcast + 4, sizeof *gid);
+}
+
+static inline int rdma_addr_gid_offset(struct rdma_dev_addr *dev_addr)
+{
+	return dev_addr->dev_type == ARPHRD_INFINIBAND ? 4 : 0;
+}
+
+static inline void iboe_mac_vlan_to_ll(union ib_gid *gid, u8 *mac, u16 vid)
+{
+	memset(gid->raw, 0, 16);
+	*((__be32 *) gid->raw) = cpu_to_be32(0xfe800000);
+	if (vid < 0x1000) {
+		gid->raw[12] = vid & 0xff;
+		gid->raw[11] = vid >> 8;
+	} else {
+		gid->raw[12] = 0xfe;
+		gid->raw[11] = 0xff;
+	}
+	memcpy(gid->raw + 13, mac + 3, 3);
+	memcpy(gid->raw + 8, mac, 3);
+	gid->raw[8] ^= 2;
+}
+
+static inline u16 rdma_vlan_dev_vlan_id(const struct net_device *dev)
+{
+	return dev->priv_flags & IFF_802_1Q_VLAN ?
+		vlan_dev_vlan_id(dev) : 0xffff;
+}
+
+static inline void iboe_addr_get_sgid(struct rdma_dev_addr *dev_addr,
+				      union ib_gid *gid)
+{
+	struct net_device *dev;
+	u16 vid = 0xffff;
+
+	dev = dev_get_by_index(&init_net, dev_addr->bound_dev_if);
+	if (dev) {
+		vid = rdma_vlan_dev_vlan_id(dev);
+		dev_put(dev);
+	}
+
+	iboe_mac_vlan_to_ll(gid, dev_addr->src_dev_addr, vid);
+}
+
+static inline void rdma_addr_get_sgid(struct rdma_dev_addr *dev_addr, union ib_gid *gid)
+{
+	if (dev_addr->transport == RDMA_TRANSPORT_IB &&
+	    dev_addr->dev_type != ARPHRD_INFINIBAND)
+		iboe_addr_get_sgid(dev_addr, gid);
+	else
+		memcpy(gid, dev_addr->src_dev_addr +
+		       rdma_addr_gid_offset(dev_addr), sizeof *gid);
+}
+
+static inline void rdma_addr_set_sgid(struct rdma_dev_addr *dev_addr, union ib_gid *gid)
+{
+	memcpy(dev_addr->src_dev_addr + rdma_addr_gid_offset(dev_addr), gid, sizeof *gid);
+}
+
+static inline void rdma_addr_get_dgid(struct rdma_dev_addr *dev_addr, union ib_gid *gid)
+{
+	memcpy(gid, dev_addr->dst_dev_addr + rdma_addr_gid_offset(dev_addr), sizeof *gid);
+}
+
+static inline void rdma_addr_set_dgid(struct rdma_dev_addr *dev_addr, union ib_gid *gid)
+{
+	memcpy(dev_addr->dst_dev_addr + rdma_addr_gid_offset(dev_addr), gid, sizeof *gid);
+}
+
+static inline enum ib_mtu iboe_get_mtu(int mtu)
+{
+	/*
+	 * reduce IB headers from effective IBoE MTU. 28 stands for
+	 * atomic header which is the biggest possible header after BTH
+	 */
+	mtu = mtu - IB_GRH_BYTES - IB_BTH_BYTES - 28;
+
+	if (mtu >= ib_mtu_enum_to_int(IB_MTU_4096))
+		return IB_MTU_4096;
+	else if (mtu >= ib_mtu_enum_to_int(IB_MTU_2048))
+		return IB_MTU_2048;
+	else if (mtu >= ib_mtu_enum_to_int(IB_MTU_1024))
+		return IB_MTU_1024;
+	else if (mtu >= ib_mtu_enum_to_int(IB_MTU_512))
+		return IB_MTU_512;
+	else if (mtu >= ib_mtu_enum_to_int(IB_MTU_256))
+		return IB_MTU_256;
+	else
+		return 0;
+}
+
+static inline int iboe_get_rate(struct net_device *dev)
+{
+	struct ethtool_cmd cmd;
+	u32 speed;
+	int err;
+
+	rtnl_lock();
+	err = __ethtool_get_settings(dev, &cmd);
+	rtnl_unlock();
+	if (err)
+		return IB_RATE_PORT_CURRENT;
+
+	speed = ethtool_cmd_speed(&cmd);
+	if (speed >= 40000)
+		return IB_RATE_40_GBPS;
+	else if (speed >= 30000)
+		return IB_RATE_30_GBPS;
+	else if (speed >= 20000)
+		return IB_RATE_20_GBPS;
+	else if (speed >= 10000)
+		return IB_RATE_10_GBPS;
+	else
+		return IB_RATE_PORT_CURRENT;
+}
+
+static inline int rdma_link_local_addr(struct in6_addr *addr)
+{
+	if (addr->s6_addr32[0] == htonl(0xfe800000) &&
+	    addr->s6_addr32[1] == 0)
+		return 1;
+
+	return 0;
+}
+
+static inline void rdma_get_ll_mac(struct in6_addr *addr, u8 *mac)
+{
+	memcpy(mac, &addr->s6_addr[8], 3);
+	memcpy(mac + 3, &addr->s6_addr[13], 3);
+	mac[0] ^= 2;
+}
+
+static inline int rdma_is_multicast_addr(struct in6_addr *addr)
+{
+	return addr->s6_addr[0] == 0xff;
+}
+
+static inline void rdma_get_mcast_mac(struct in6_addr *addr, u8 *mac)
+{
+	int i;
+
+	mac[0] = 0x33;
+	mac[1] = 0x33;
+	for (i = 2; i < 6; ++i)
+		mac[i] = addr->s6_addr[i + 10];
+}
+
+static inline u16 rdma_get_vlan_id(union ib_gid *dgid)
+{
+	u16 vid;
+
+	vid = dgid->raw[11] << 8 | dgid->raw[12];
+	return vid < 0x1000 ? vid : 0xffff;
+}
+
+static inline struct net_device *rdma_vlan_dev_real_dev(const struct net_device *dev)
+{
+	return dev->priv_flags & IFF_802_1Q_VLAN ?
+		vlan_dev_real_dev(dev) : NULL;
+}
+
+#endif /* IB_ADDR_H */
diff --git a/include/rdma/ib_cache.h b/include/rdma/ib_cache.h
new file mode 100644
index 00000000..00a2b8ec
--- /dev/null
+++ b/include/rdma/ib_cache.h
@@ -0,0 +1,116 @@
+/*
+ * Copyright (c) 2004 Topspin Communications.  All rights reserved.
+ * Copyright (c) 2005 Intel Corporation. All rights reserved.
+ * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef _IB_CACHE_H
+#define _IB_CACHE_H
+
+#include <rdma/ib_verbs.h>
+
+/**
+ * ib_get_cached_gid - Returns a cached GID table entry
+ * @device: The device to query.
+ * @port_num: The port number of the device to query.
+ * @index: The index into the cached GID table to query.
+ * @gid: The GID value found at the specified index.
+ *
+ * ib_get_cached_gid() fetches the specified GID table entry stored in
+ * the local software cache.
+ */
+int ib_get_cached_gid(struct ib_device    *device,
+		      u8                   port_num,
+		      int                  index,
+		      union ib_gid        *gid);
+
+/**
+ * ib_find_cached_gid - Returns the port number and GID table index where
+ *   a specified GID value occurs.
+ * @device: The device to query.
+ * @gid: The GID value to search for.
+ * @port_num: The port number of the device where the GID value was found.
+ * @index: The index into the cached GID table where the GID was found.  This
+ *   parameter may be NULL.
+ *
+ * ib_find_cached_gid() searches for the specified GID value in
+ * the local software cache.
+ */
+int ib_find_cached_gid(struct ib_device *device,
+		       union ib_gid	*gid,
+		       u8               *port_num,
+		       u16              *index);
+
+/**
+ * ib_get_cached_pkey - Returns a cached PKey table entry
+ * @device: The device to query.
+ * @port_num: The port number of the device to query.
+ * @index: The index into the cached PKey table to query.
+ * @pkey: The PKey value found at the specified index.
+ *
+ * ib_get_cached_pkey() fetches the specified PKey table entry stored in
+ * the local software cache.
+ */
+int ib_get_cached_pkey(struct ib_device    *device_handle,
+		       u8                   port_num,
+		       int                  index,
+		       u16                 *pkey);
+
+/**
+ * ib_find_cached_pkey - Returns the PKey table index where a specified
+ *   PKey value occurs.
+ * @device: The device to query.
+ * @port_num: The port number of the device to search for the PKey.
+ * @pkey: The PKey value to search for.
+ * @index: The index into the cached PKey table where the PKey was found.
+ *
+ * ib_find_cached_pkey() searches the specified PKey table in
+ * the local software cache.
+ */
+int ib_find_cached_pkey(struct ib_device    *device,
+			u8                   port_num,
+			u16                  pkey,
+			u16                 *index);
+
+/**
+ * ib_get_cached_lmc - Returns a cached lmc table entry
+ * @device: The device to query.
+ * @port_num: The port number of the device to query.
+ * @lmc: The lmc value for the specified port for that device.
+ *
+ * ib_get_cached_lmc() fetches the specified lmc table entry stored in
+ * the local software cache.
+ */
+int ib_get_cached_lmc(struct ib_device *device,
+		      u8                port_num,
+		      u8                *lmc);
+
+#endif /* _IB_CACHE_H */
diff --git a/include/rdma/ib_cm.h b/include/rdma/ib_cm.h
new file mode 100644
index 00000000..83f77ac3
--- /dev/null
+++ b/include/rdma/ib_cm.h
@@ -0,0 +1,592 @@
+/*
+ * Copyright (c) 2004, 2005 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2004 Topspin Corporation.  All rights reserved.
+ * Copyright (c) 2004 Voltaire Corporation.  All rights reserved.
+ * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#if !defined(IB_CM_H)
+#define IB_CM_H
+
+#include <rdma/ib_mad.h>
+#include <rdma/ib_sa.h>
+
+/* ib_cm and ib_user_cm modules share /sys/class/infiniband_cm */
+extern struct class cm_class;
+
+enum ib_cm_state {
+	IB_CM_IDLE,
+	IB_CM_LISTEN,
+	IB_CM_REQ_SENT,
+	IB_CM_REQ_RCVD,
+	IB_CM_MRA_REQ_SENT,
+	IB_CM_MRA_REQ_RCVD,
+	IB_CM_REP_SENT,
+	IB_CM_REP_RCVD,
+	IB_CM_MRA_REP_SENT,
+	IB_CM_MRA_REP_RCVD,
+	IB_CM_ESTABLISHED,
+	IB_CM_DREQ_SENT,
+	IB_CM_DREQ_RCVD,
+	IB_CM_TIMEWAIT,
+	IB_CM_SIDR_REQ_SENT,
+	IB_CM_SIDR_REQ_RCVD
+};
+
+enum ib_cm_lap_state {
+	IB_CM_LAP_UNINIT,
+	IB_CM_LAP_IDLE,
+	IB_CM_LAP_SENT,
+	IB_CM_LAP_RCVD,
+	IB_CM_MRA_LAP_SENT,
+	IB_CM_MRA_LAP_RCVD,
+};
+
+enum ib_cm_event_type {
+	IB_CM_REQ_ERROR,
+	IB_CM_REQ_RECEIVED,
+	IB_CM_REP_ERROR,
+	IB_CM_REP_RECEIVED,
+	IB_CM_RTU_RECEIVED,
+	IB_CM_USER_ESTABLISHED,
+	IB_CM_DREQ_ERROR,
+	IB_CM_DREQ_RECEIVED,
+	IB_CM_DREP_RECEIVED,
+	IB_CM_TIMEWAIT_EXIT,
+	IB_CM_MRA_RECEIVED,
+	IB_CM_REJ_RECEIVED,
+	IB_CM_LAP_ERROR,
+	IB_CM_LAP_RECEIVED,
+	IB_CM_APR_RECEIVED,
+	IB_CM_SIDR_REQ_ERROR,
+	IB_CM_SIDR_REQ_RECEIVED,
+	IB_CM_SIDR_REP_RECEIVED
+};
+
+enum ib_cm_data_size {
+	IB_CM_REQ_PRIVATE_DATA_SIZE	 = 92,
+	IB_CM_MRA_PRIVATE_DATA_SIZE	 = 222,
+	IB_CM_REJ_PRIVATE_DATA_SIZE	 = 148,
+	IB_CM_REP_PRIVATE_DATA_SIZE	 = 196,
+	IB_CM_RTU_PRIVATE_DATA_SIZE	 = 224,
+	IB_CM_DREQ_PRIVATE_DATA_SIZE	 = 220,
+	IB_CM_DREP_PRIVATE_DATA_SIZE	 = 224,
+	IB_CM_REJ_ARI_LENGTH		 = 72,
+	IB_CM_LAP_PRIVATE_DATA_SIZE	 = 168,
+	IB_CM_APR_PRIVATE_DATA_SIZE	 = 148,
+	IB_CM_APR_INFO_LENGTH		 = 72,
+	IB_CM_SIDR_REQ_PRIVATE_DATA_SIZE = 216,
+	IB_CM_SIDR_REP_PRIVATE_DATA_SIZE = 136,
+	IB_CM_SIDR_REP_INFO_LENGTH	 = 72,
+	IB_CM_COMPARE_SIZE		 = 64
+};
+
+struct ib_cm_id;
+
+struct ib_cm_req_event_param {
+	struct ib_cm_id		*listen_id;
+	u8			port;
+
+	struct ib_sa_path_rec	*primary_path;
+	struct ib_sa_path_rec	*alternate_path;
+
+	__be64			remote_ca_guid;
+	u32			remote_qkey;
+	u32			remote_qpn;
+	enum ib_qp_type		qp_type;
+
+	u32			starting_psn;
+	u8			responder_resources;
+	u8			initiator_depth;
+	unsigned int		local_cm_response_timeout:5;
+	unsigned int		flow_control:1;
+	unsigned int		remote_cm_response_timeout:5;
+	unsigned int		retry_count:3;
+	unsigned int		rnr_retry_count:3;
+	unsigned int		srq:1;
+};
+
+struct ib_cm_rep_event_param {
+	__be64			remote_ca_guid;
+	u32			remote_qkey;
+	u32			remote_qpn;
+	u32			starting_psn;
+	u8			responder_resources;
+	u8			initiator_depth;
+	unsigned int		target_ack_delay:5;
+	unsigned int		failover_accepted:2;
+	unsigned int		flow_control:1;
+	unsigned int		rnr_retry_count:3;
+	unsigned int		srq:1;
+};
+
+enum ib_cm_rej_reason {
+	IB_CM_REJ_NO_QP				= 1,
+	IB_CM_REJ_NO_EEC			= 2,
+	IB_CM_REJ_NO_RESOURCES			= 3,
+	IB_CM_REJ_TIMEOUT			= 4,
+	IB_CM_REJ_UNSUPPORTED			= 5,
+	IB_CM_REJ_INVALID_COMM_ID		= 6,
+	IB_CM_REJ_INVALID_COMM_INSTANCE		= 7,
+	IB_CM_REJ_INVALID_SERVICE_ID		= 8,
+	IB_CM_REJ_INVALID_TRANSPORT_TYPE	= 9,
+	IB_CM_REJ_STALE_CONN			= 10,
+	IB_CM_REJ_RDC_NOT_EXIST			= 11,
+	IB_CM_REJ_INVALID_GID			= 12,
+	IB_CM_REJ_INVALID_LID			= 13,
+	IB_CM_REJ_INVALID_SL			= 14,
+	IB_CM_REJ_INVALID_TRAFFIC_CLASS		= 15,
+	IB_CM_REJ_INVALID_HOP_LIMIT		= 16,
+	IB_CM_REJ_INVALID_PACKET_RATE		= 17,
+	IB_CM_REJ_INVALID_ALT_GID		= 18,
+	IB_CM_REJ_INVALID_ALT_LID		= 19,
+	IB_CM_REJ_INVALID_ALT_SL		= 20,
+	IB_CM_REJ_INVALID_ALT_TRAFFIC_CLASS	= 21,
+	IB_CM_REJ_INVALID_ALT_HOP_LIMIT		= 22,
+	IB_CM_REJ_INVALID_ALT_PACKET_RATE	= 23,
+	IB_CM_REJ_PORT_CM_REDIRECT		= 24,
+	IB_CM_REJ_PORT_REDIRECT			= 25,
+	IB_CM_REJ_INVALID_MTU			= 26,
+	IB_CM_REJ_INSUFFICIENT_RESP_RESOURCES	= 27,
+	IB_CM_REJ_CONSUMER_DEFINED		= 28,
+	IB_CM_REJ_INVALID_RNR_RETRY		= 29,
+	IB_CM_REJ_DUPLICATE_LOCAL_COMM_ID	= 30,
+	IB_CM_REJ_INVALID_CLASS_VERSION		= 31,
+	IB_CM_REJ_INVALID_FLOW_LABEL		= 32,
+	IB_CM_REJ_INVALID_ALT_FLOW_LABEL	= 33
+};
+
+struct ib_cm_rej_event_param {
+	enum ib_cm_rej_reason	reason;
+	void			*ari;
+	u8			ari_length;
+};
+
+struct ib_cm_mra_event_param {
+	u8	service_timeout;
+};
+
+struct ib_cm_lap_event_param {
+	struct ib_sa_path_rec	*alternate_path;
+};
+
+enum ib_cm_apr_status {
+	IB_CM_APR_SUCCESS,
+	IB_CM_APR_INVALID_COMM_ID,
+	IB_CM_APR_UNSUPPORTED,
+	IB_CM_APR_REJECT,
+	IB_CM_APR_REDIRECT,
+	IB_CM_APR_IS_CURRENT,
+	IB_CM_APR_INVALID_QPN_EECN,
+	IB_CM_APR_INVALID_LID,
+	IB_CM_APR_INVALID_GID,
+	IB_CM_APR_INVALID_FLOW_LABEL,
+	IB_CM_APR_INVALID_TCLASS,
+	IB_CM_APR_INVALID_HOP_LIMIT,
+	IB_CM_APR_INVALID_PACKET_RATE,
+	IB_CM_APR_INVALID_SL
+};
+
+struct ib_cm_apr_event_param {
+	enum ib_cm_apr_status	ap_status;
+	void			*apr_info;
+	u8			info_len;
+};
+
+struct ib_cm_sidr_req_event_param {
+	struct ib_cm_id		*listen_id;
+	u8			port;
+	u16			pkey;
+};
+
+enum ib_cm_sidr_status {
+	IB_SIDR_SUCCESS,
+	IB_SIDR_UNSUPPORTED,
+	IB_SIDR_REJECT,
+	IB_SIDR_NO_QP,
+	IB_SIDR_REDIRECT,
+	IB_SIDR_UNSUPPORTED_VERSION
+};
+
+struct ib_cm_sidr_rep_event_param {
+	enum ib_cm_sidr_status	status;
+	u32			qkey;
+	u32			qpn;
+	void			*info;
+	u8			info_len;
+};
+
+struct ib_cm_event {
+	enum ib_cm_event_type	event;
+	union {
+		struct ib_cm_req_event_param	req_rcvd;
+		struct ib_cm_rep_event_param	rep_rcvd;
+		/* No data for RTU received events. */
+		struct ib_cm_rej_event_param	rej_rcvd;
+		struct ib_cm_mra_event_param	mra_rcvd;
+		struct ib_cm_lap_event_param	lap_rcvd;
+		struct ib_cm_apr_event_param	apr_rcvd;
+		/* No data for DREQ/DREP received events. */
+		struct ib_cm_sidr_req_event_param sidr_req_rcvd;
+		struct ib_cm_sidr_rep_event_param sidr_rep_rcvd;
+		enum ib_wc_status		send_status;
+	} param;
+
+	void			*private_data;
+};
+
+/**
+ * ib_cm_handler - User-defined callback to process communication events.
+ * @cm_id: Communication identifier associated with the reported event.
+ * @event: Information about the communication event.
+ *
+ * IB_CM_REQ_RECEIVED and IB_CM_SIDR_REQ_RECEIVED communication events
+ * generated as a result of listen requests result in the allocation of a
+ * new @cm_id.  The new @cm_id is returned to the user through this callback.
+ * Clients are responsible for destroying the new @cm_id.  For peer-to-peer
+ * IB_CM_REQ_RECEIVED and all other events, the returned @cm_id corresponds
+ * to a user's existing communication identifier.
+ *
+ * Users may not call ib_destroy_cm_id while in the context of this callback;
+ * however, returning a non-zero value instructs the communication manager to
+ * destroy the @cm_id after the callback completes.
+ */
+typedef int (*ib_cm_handler)(struct ib_cm_id *cm_id,
+			     struct ib_cm_event *event);
+
+struct ib_cm_id {
+	ib_cm_handler		cm_handler;
+	void			*context;
+	struct ib_device	*device;
+	__be64			service_id;
+	__be64			service_mask;
+	enum ib_cm_state	state;		/* internal CM/debug use */
+	enum ib_cm_lap_state	lap_state;	/* internal CM/debug use */
+	__be32			local_id;
+	__be32			remote_id;
+	u32			remote_cm_qpn;  /* 1 unless redirected */
+};
+
+/**
+ * ib_create_cm_id - Allocate a communication identifier.
+ * @device: Device associated with the cm_id.  All related communication will
+ * be associated with the specified device.
+ * @cm_handler: Callback invoked to notify the user of CM events.
+ * @context: User specified context associated with the communication
+ *   identifier.
+ *
+ * Communication identifiers are used to track connection states, service
+ * ID resolution requests, and listen requests.
+ */
+struct ib_cm_id *ib_create_cm_id(struct ib_device *device,
+				 ib_cm_handler cm_handler,
+				 void *context);
+
+/**
+ * ib_destroy_cm_id - Destroy a connection identifier.
+ * @cm_id: Connection identifier to destroy.
+ *
+ * This call blocks until the connection identifier is destroyed.
+ */
+void ib_destroy_cm_id(struct ib_cm_id *cm_id);
+
+#define IB_SERVICE_ID_AGN_MASK	cpu_to_be64(0xFF00000000000000ULL)
+#define IB_CM_ASSIGN_SERVICE_ID	cpu_to_be64(0x0200000000000000ULL)
+#define IB_CMA_SERVICE_ID	cpu_to_be64(0x0000000001000000ULL)
+#define IB_CMA_SERVICE_ID_MASK	cpu_to_be64(0xFFFFFFFFFF000000ULL)
+#define IB_SDP_SERVICE_ID	cpu_to_be64(0x0000000000010000ULL)
+#define IB_SDP_SERVICE_ID_MASK	cpu_to_be64(0xFFFFFFFFFFFF0000ULL)
+
+struct ib_cm_compare_data {
+	u8  data[IB_CM_COMPARE_SIZE];
+	u8  mask[IB_CM_COMPARE_SIZE];
+};
+
+/**
+ * ib_cm_listen - Initiates listening on the specified service ID for
+ *   connection and service ID resolution requests.
+ * @cm_id: Connection identifier associated with the listen request.
+ * @service_id: Service identifier matched against incoming connection
+ *   and service ID resolution requests.  The service ID should be specified
+ *   network-byte order.  If set to IB_CM_ASSIGN_SERVICE_ID, the CM will
+ *   assign a service ID to the caller.
+ * @service_mask: Mask applied to service ID used to listen across a
+ *   range of service IDs.  If set to 0, the service ID is matched
+ *   exactly.  This parameter is ignored if %service_id is set to
+ *   IB_CM_ASSIGN_SERVICE_ID.
+ * @compare_data: This parameter is optional.  It specifies data that must
+ *   appear in the private data of a connection request for the specified
+ *   listen request.
+ */
+int ib_cm_listen(struct ib_cm_id *cm_id, __be64 service_id, __be64 service_mask,
+		 struct ib_cm_compare_data *compare_data);
+
+struct ib_cm_req_param {
+	struct ib_sa_path_rec	*primary_path;
+	struct ib_sa_path_rec	*alternate_path;
+	__be64			service_id;
+	u32			qp_num;
+	enum ib_qp_type		qp_type;
+	u32			starting_psn;
+	const void		*private_data;
+	u8			private_data_len;
+	u8			peer_to_peer;
+	u8			responder_resources;
+	u8			initiator_depth;
+	u8			remote_cm_response_timeout;
+	u8			flow_control;
+	u8			local_cm_response_timeout;
+	u8			retry_count;
+	u8			rnr_retry_count;
+	u8			max_cm_retries;
+	u8			srq;
+};
+
+/**
+ * ib_send_cm_req - Sends a connection request to the remote node.
+ * @cm_id: Connection identifier that will be associated with the
+ *   connection request.
+ * @param: Connection request information needed to establish the
+ *   connection.
+ */
+int ib_send_cm_req(struct ib_cm_id *cm_id,
+		   struct ib_cm_req_param *param);
+
+struct ib_cm_rep_param {
+	u32		qp_num;
+	u32		starting_psn;
+	const void	*private_data;
+	u8		private_data_len;
+	u8		responder_resources;
+	u8		initiator_depth;
+	u8		failover_accepted;
+	u8		flow_control;
+	u8		rnr_retry_count;
+	u8		srq;
+};
+
+/**
+ * ib_send_cm_rep - Sends a connection reply in response to a connection
+ *   request.
+ * @cm_id: Connection identifier that will be associated with the
+ *   connection request.
+ * @param: Connection reply information needed to establish the
+ *   connection.
+ */
+int ib_send_cm_rep(struct ib_cm_id *cm_id,
+		   struct ib_cm_rep_param *param);
+
+/**
+ * ib_send_cm_rtu - Sends a connection ready to use message in response
+ *   to a connection reply message.
+ * @cm_id: Connection identifier associated with the connection request.
+ * @private_data: Optional user-defined private data sent with the
+ *   ready to use message.
+ * @private_data_len: Size of the private data buffer, in bytes.
+ */
+int ib_send_cm_rtu(struct ib_cm_id *cm_id,
+		   const void *private_data,
+		   u8 private_data_len);
+
+/**
+ * ib_send_cm_dreq - Sends a disconnection request for an existing
+ *   connection.
+ * @cm_id: Connection identifier associated with the connection being
+ *   released.
+ * @private_data: Optional user-defined private data sent with the
+ *   disconnection request message.
+ * @private_data_len: Size of the private data buffer, in bytes.
+ */
+int ib_send_cm_dreq(struct ib_cm_id *cm_id,
+		    const void *private_data,
+		    u8 private_data_len);
+
+/**
+ * ib_send_cm_drep - Sends a disconnection reply to a disconnection request.
+ * @cm_id: Connection identifier associated with the connection being
+ *   released.
+ * @private_data: Optional user-defined private data sent with the
+ *   disconnection reply message.
+ * @private_data_len: Size of the private data buffer, in bytes.
+ *
+ * If the cm_id is in the correct state, the CM will transition the connection
+ * to the timewait state, even if an error occurs sending the DREP message.
+ */
+int ib_send_cm_drep(struct ib_cm_id *cm_id,
+		    const void *private_data,
+		    u8 private_data_len);
+
+/**
+ * ib_cm_notify - Notifies the CM of an event reported to the consumer.
+ * @cm_id: Connection identifier to transition to established.
+ * @event: Type of event.
+ *
+ * This routine should be invoked by users to notify the CM of relevant
+ * communication events.  Events that should be reported to the CM and
+ * when to report them are:
+ *
+ * IB_EVENT_COMM_EST - Used when a message is received on a connected
+ *    QP before an RTU has been received.
+ * IB_EVENT_PATH_MIG - Notifies the CM that the connection has failed over
+ *   to the alternate path.
+ */
+int ib_cm_notify(struct ib_cm_id *cm_id, enum ib_event_type event);
+
+/**
+ * ib_send_cm_rej - Sends a connection rejection message to the
+ *   remote node.
+ * @cm_id: Connection identifier associated with the connection being
+ *   rejected.
+ * @reason: Reason for the connection request rejection.
+ * @ari: Optional additional rejection information.
+ * @ari_length: Size of the additional rejection information, in bytes.
+ * @private_data: Optional user-defined private data sent with the
+ *   rejection message.
+ * @private_data_len: Size of the private data buffer, in bytes.
+ */
+int ib_send_cm_rej(struct ib_cm_id *cm_id,
+		   enum ib_cm_rej_reason reason,
+		   void *ari,
+		   u8 ari_length,
+		   const void *private_data,
+		   u8 private_data_len);
+
+#define IB_CM_MRA_FLAG_DELAY 0x80  /* Send MRA only after a duplicate msg */
+
+/**
+ * ib_send_cm_mra - Sends a message receipt acknowledgement to a connection
+ *   message.
+ * @cm_id: Connection identifier associated with the connection message.
+ * @service_timeout: The lower 5-bits specify the maximum time required for
+ *   the sender to reply to the connection message.  The upper 3-bits
+ *   specify additional control flags.
+ * @private_data: Optional user-defined private data sent with the
+ *   message receipt acknowledgement.
+ * @private_data_len: Size of the private data buffer, in bytes.
+ */
+int ib_send_cm_mra(struct ib_cm_id *cm_id,
+		   u8 service_timeout,
+		   const void *private_data,
+		   u8 private_data_len);
+
+/**
+ * ib_send_cm_lap - Sends a load alternate path request.
+ * @cm_id: Connection identifier associated with the load alternate path
+ *   message.
+ * @alternate_path: A path record that identifies the alternate path to
+ *   load.
+ * @private_data: Optional user-defined private data sent with the
+ *   load alternate path message.
+ * @private_data_len: Size of the private data buffer, in bytes.
+ */
+int ib_send_cm_lap(struct ib_cm_id *cm_id,
+		   struct ib_sa_path_rec *alternate_path,
+		   const void *private_data,
+		   u8 private_data_len);
+
+/**
+ * ib_cm_init_qp_attr - Initializes the QP attributes for use in transitioning
+ *   to a specified QP state.
+ * @cm_id: Communication identifier associated with the QP attributes to
+ *   initialize.
+ * @qp_attr: On input, specifies the desired QP state.  On output, the
+ *   mandatory and desired optional attributes will be set in order to
+ *   modify the QP to the specified state.
+ * @qp_attr_mask: The QP attribute mask that may be used to transition the
+ *   QP to the specified state.
+ *
+ * Users must set the @qp_attr->qp_state to the desired QP state.  This call
+ * will set all required attributes for the given transition, along with
+ * known optional attributes.  Users may override the attributes returned from
+ * this call before calling ib_modify_qp.
+ */
+int ib_cm_init_qp_attr(struct ib_cm_id *cm_id,
+		       struct ib_qp_attr *qp_attr,
+		       int *qp_attr_mask);
+
+/**
+ * ib_send_cm_apr - Sends an alternate path response message in response to
+ *   a load alternate path request.
+ * @cm_id: Connection identifier associated with the alternate path response.
+ * @status: Reply status sent with the alternate path response.
+ * @info: Optional additional information sent with the alternate path
+ *   response.
+ * @info_length: Size of the additional information, in bytes.
+ * @private_data: Optional user-defined private data sent with the
+ *   alternate path response message.
+ * @private_data_len: Size of the private data buffer, in bytes.
+ */
+int ib_send_cm_apr(struct ib_cm_id *cm_id,
+		   enum ib_cm_apr_status status,
+		   void *info,
+		   u8 info_length,
+		   const void *private_data,
+		   u8 private_data_len);
+
+struct ib_cm_sidr_req_param {
+	struct ib_sa_path_rec	*path;
+	__be64			service_id;
+	int			timeout_ms;
+	const void		*private_data;
+	u8			private_data_len;
+	u8			max_cm_retries;
+};
+
+/**
+ * ib_send_cm_sidr_req - Sends a service ID resolution request to the
+ *   remote node.
+ * @cm_id: Communication identifier that will be associated with the
+ *   service ID resolution request.
+ * @param: Service ID resolution request information.
+ */
+int ib_send_cm_sidr_req(struct ib_cm_id *cm_id,
+			struct ib_cm_sidr_req_param *param);
+
+struct ib_cm_sidr_rep_param {
+	u32			qp_num;
+	u32			qkey;
+	enum ib_cm_sidr_status	status;
+	const void		*info;
+	u8			info_length;
+	const void		*private_data;
+	u8			private_data_len;
+};
+
+/**
+ * ib_send_cm_sidr_rep - Sends a service ID resolution reply to the
+ *   remote node.
+ * @cm_id: Communication identifier associated with the received service ID
+ *   resolution request.
+ * @param: Service ID resolution reply information.
+ */
+int ib_send_cm_sidr_rep(struct ib_cm_id *cm_id,
+			struct ib_cm_sidr_rep_param *param);
+
+#endif /* IB_CM_H */
diff --git a/include/rdma/ib_fmr_pool.h b/include/rdma/ib_fmr_pool.h
new file mode 100644
index 00000000..f62b842e
--- /dev/null
+++ b/include/rdma/ib_fmr_pool.h
@@ -0,0 +1,93 @@
+/*
+ * Copyright (c) 2004 Topspin Corporation.  All rights reserved.
+ * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#if !defined(IB_FMR_POOL_H)
+#define IB_FMR_POOL_H
+
+#include <rdma/ib_verbs.h>
+
+struct ib_fmr_pool;
+
+/**
+ * struct ib_fmr_pool_param - Parameters for creating FMR pool
+ * @max_pages_per_fmr:Maximum number of pages per map request.
+ * @page_shift: Log2 of sizeof "pages" mapped by this fmr
+ * @access:Access flags for FMRs in pool.
+ * @pool_size:Number of FMRs to allocate for pool.
+ * @dirty_watermark:Flush is triggered when @dirty_watermark dirty
+ *     FMRs are present.
+ * @flush_function:Callback called when unmapped FMRs are flushed and
+ *     more FMRs are possibly available for mapping
+ * @flush_arg:Context passed to user's flush function.
+ * @cache:If set, FMRs may be reused after unmapping for identical map
+ *     requests.
+ */
+struct ib_fmr_pool_param {
+	int                     max_pages_per_fmr;
+	int                     page_shift;
+	enum ib_access_flags    access;
+	int                     pool_size;
+	int                     dirty_watermark;
+	void                  (*flush_function)(struct ib_fmr_pool *pool,
+						void               *arg);
+	void                   *flush_arg;
+	unsigned                cache:1;
+};
+
+struct ib_pool_fmr {
+	struct ib_fmr      *fmr;
+	struct ib_fmr_pool *pool;
+	struct list_head    list;
+	struct hlist_node   cache_node;
+	int                 ref_count;
+	int                 remap_count;
+	u64                 io_virtual_address;
+	int                 page_list_len;
+	u64                 page_list[0];
+};
+
+struct ib_fmr_pool *ib_create_fmr_pool(struct ib_pd             *pd,
+				       struct ib_fmr_pool_param *params);
+
+void ib_destroy_fmr_pool(struct ib_fmr_pool *pool);
+
+int ib_flush_fmr_pool(struct ib_fmr_pool *pool);
+
+struct ib_pool_fmr *ib_fmr_pool_map_phys(struct ib_fmr_pool *pool_handle,
+					 u64                *page_list,
+					 int                 list_len,
+					 u64                 io_virtual_address);
+
+int ib_fmr_pool_unmap(struct ib_pool_fmr *fmr);
+
+#endif /* IB_FMR_POOL_H */
diff --git a/include/rdma/ib_mad.h b/include/rdma/ib_mad.h
new file mode 100644
index 00000000..b513f57e
--- /dev/null
+++ b/include/rdma/ib_mad.h
@@ -0,0 +1,664 @@
+/*
+ * Copyright (c) 2004 Mellanox Technologies Ltd.  All rights reserved.
+ * Copyright (c) 2004 Infinicon Corporation.  All rights reserved.
+ * Copyright (c) 2004 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2004 Topspin Corporation.  All rights reserved.
+ * Copyright (c) 2004-2006 Voltaire Corporation.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#if !defined(IB_MAD_H)
+#define IB_MAD_H
+
+#include <linux/list.h>
+
+#include <rdma/ib_verbs.h>
+
+/* Management base version */
+#define IB_MGMT_BASE_VERSION			1
+
+/* Management classes */
+#define IB_MGMT_CLASS_SUBN_LID_ROUTED		0x01
+#define IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE	0x81
+#define IB_MGMT_CLASS_SUBN_ADM			0x03
+#define IB_MGMT_CLASS_PERF_MGMT			0x04
+#define IB_MGMT_CLASS_BM			0x05
+#define IB_MGMT_CLASS_DEVICE_MGMT		0x06
+#define IB_MGMT_CLASS_CM			0x07
+#define IB_MGMT_CLASS_SNMP			0x08
+#define IB_MGMT_CLASS_DEVICE_ADM		0x10
+#define IB_MGMT_CLASS_BOOT_MGMT			0x11
+#define IB_MGMT_CLASS_BIS			0x12
+#define IB_MGMT_CLASS_CONG_MGMT			0x21
+#define IB_MGMT_CLASS_VENDOR_RANGE2_START	0x30
+#define IB_MGMT_CLASS_VENDOR_RANGE2_END		0x4F
+
+#define	IB_OPENIB_OUI				(0x001405)
+
+/* Management methods */
+#define IB_MGMT_METHOD_GET			0x01
+#define IB_MGMT_METHOD_SET			0x02
+#define IB_MGMT_METHOD_GET_RESP			0x81
+#define IB_MGMT_METHOD_SEND			0x03
+#define IB_MGMT_METHOD_TRAP			0x05
+#define IB_MGMT_METHOD_REPORT			0x06
+#define IB_MGMT_METHOD_REPORT_RESP		0x86
+#define IB_MGMT_METHOD_TRAP_REPRESS		0x07
+
+#define IB_MGMT_METHOD_RESP			0x80
+#define IB_BM_ATTR_MOD_RESP			cpu_to_be32(1)
+
+#define IB_MGMT_MAX_METHODS			128
+
+/* MAD Status field bit masks */
+#define IB_MGMT_MAD_STATUS_SUCCESS			0x0000
+#define IB_MGMT_MAD_STATUS_BUSY				0x0001
+#define IB_MGMT_MAD_STATUS_REDIRECT_REQD		0x0002
+#define IB_MGMT_MAD_STATUS_BAD_VERSION			0x0004
+#define IB_MGMT_MAD_STATUS_UNSUPPORTED_METHOD		0x0008
+#define IB_MGMT_MAD_STATUS_UNSUPPORTED_METHOD_ATTRIB	0x000c
+#define IB_MGMT_MAD_STATUS_INVALID_ATTRIB_VALUE		0x001c
+
+/* RMPP information */
+#define IB_MGMT_RMPP_VERSION			1
+
+#define IB_MGMT_RMPP_TYPE_DATA			1
+#define IB_MGMT_RMPP_TYPE_ACK			2
+#define IB_MGMT_RMPP_TYPE_STOP			3
+#define IB_MGMT_RMPP_TYPE_ABORT			4
+
+#define IB_MGMT_RMPP_FLAG_ACTIVE		1
+#define IB_MGMT_RMPP_FLAG_FIRST			(1<<1)
+#define IB_MGMT_RMPP_FLAG_LAST			(1<<2)
+
+#define IB_MGMT_RMPP_NO_RESPTIME		0x1F
+
+#define	IB_MGMT_RMPP_STATUS_SUCCESS		0
+#define	IB_MGMT_RMPP_STATUS_RESX		1
+#define	IB_MGMT_RMPP_STATUS_ABORT_MIN		118
+#define	IB_MGMT_RMPP_STATUS_T2L			118
+#define	IB_MGMT_RMPP_STATUS_BAD_LEN		119
+#define	IB_MGMT_RMPP_STATUS_BAD_SEG		120
+#define	IB_MGMT_RMPP_STATUS_BADT		121
+#define	IB_MGMT_RMPP_STATUS_W2S			122
+#define	IB_MGMT_RMPP_STATUS_S2B			123
+#define	IB_MGMT_RMPP_STATUS_BAD_STATUS		124
+#define	IB_MGMT_RMPP_STATUS_UNV			125
+#define	IB_MGMT_RMPP_STATUS_TMR			126
+#define	IB_MGMT_RMPP_STATUS_UNSPEC		127
+#define	IB_MGMT_RMPP_STATUS_ABORT_MAX		127
+
+#define IB_QP0		0
+#define IB_QP1		cpu_to_be32(1)
+#define IB_QP1_QKEY	0x80010000
+#define IB_QP_SET_QKEY	0x80000000
+
+#define IB_DEFAULT_PKEY_PARTIAL 0x7FFF
+#define IB_DEFAULT_PKEY_FULL	0xFFFF
+
+enum {
+	IB_MGMT_MAD_HDR = 24,
+	IB_MGMT_MAD_DATA = 232,
+	IB_MGMT_RMPP_HDR = 36,
+	IB_MGMT_RMPP_DATA = 220,
+	IB_MGMT_VENDOR_HDR = 40,
+	IB_MGMT_VENDOR_DATA = 216,
+	IB_MGMT_SA_HDR = 56,
+	IB_MGMT_SA_DATA = 200,
+	IB_MGMT_DEVICE_HDR = 64,
+	IB_MGMT_DEVICE_DATA = 192,
+};
+
+struct ib_mad_hdr {
+	u8	base_version;
+	u8	mgmt_class;
+	u8	class_version;
+	u8	method;
+	__be16	status;
+	__be16	class_specific;
+	__be64	tid;
+	__be16	attr_id;
+	__be16	resv;
+	__be32	attr_mod;
+};
+
+struct ib_rmpp_hdr {
+	u8	rmpp_version;
+	u8	rmpp_type;
+	u8	rmpp_rtime_flags;
+	u8	rmpp_status;
+	__be32	seg_num;
+	__be32	paylen_newwin;
+};
+
+typedef u64 __bitwise ib_sa_comp_mask;
+
+#define IB_SA_COMP_MASK(n) ((__force ib_sa_comp_mask) cpu_to_be64(1ull << n))
+
+/*
+ * ib_sa_hdr and ib_sa_mad structures must be packed because they have
+ * 64-bit fields that are only 32-bit aligned. 64-bit architectures will
+ * lay them out wrong otherwise.  (And unfortunately they are sent on
+ * the wire so we can't change the layout)
+ */
+struct ib_sa_hdr {
+	__be64			sm_key;
+	__be16			attr_offset;
+	__be16			reserved;
+	ib_sa_comp_mask		comp_mask;
+} __attribute__ ((packed));
+
+struct ib_mad {
+	struct ib_mad_hdr	mad_hdr;
+	u8			data[IB_MGMT_MAD_DATA];
+};
+
+struct ib_rmpp_mad {
+	struct ib_mad_hdr	mad_hdr;
+	struct ib_rmpp_hdr	rmpp_hdr;
+	u8			data[IB_MGMT_RMPP_DATA];
+};
+
+struct ib_sa_mad {
+	struct ib_mad_hdr	mad_hdr;
+	struct ib_rmpp_hdr	rmpp_hdr;
+	struct ib_sa_hdr	sa_hdr;
+	u8			data[IB_MGMT_SA_DATA];
+} __attribute__ ((packed));
+
+struct ib_vendor_mad {
+	struct ib_mad_hdr	mad_hdr;
+	struct ib_rmpp_hdr	rmpp_hdr;
+	u8			reserved;
+	u8			oui[3];
+	u8			data[IB_MGMT_VENDOR_DATA];
+};
+
+struct ib_class_port_info {
+	u8			base_version;
+	u8			class_version;
+	__be16			capability_mask;
+	u8			reserved[3];
+	u8			resp_time_value;
+	u8			redirect_gid[16];
+	__be32			redirect_tcslfl;
+	__be16			redirect_lid;
+	__be16			redirect_pkey;
+	__be32			redirect_qp;
+	__be32			redirect_qkey;
+	u8			trap_gid[16];
+	__be32			trap_tcslfl;
+	__be16			trap_lid;
+	__be16			trap_pkey;
+	__be32			trap_hlqp;
+	__be32			trap_qkey;
+};
+
+/**
+ * ib_mad_send_buf - MAD data buffer and work request for sends.
+ * @next: A pointer used to chain together MADs for posting.
+ * @mad: References an allocated MAD data buffer for MADs that do not have
+ *   RMPP active.  For MADs using RMPP, references the common and management
+ *   class specific headers.
+ * @mad_agent: MAD agent that allocated the buffer.
+ * @ah: The address handle to use when sending the MAD.
+ * @context: User-controlled context fields.
+ * @hdr_len: Indicates the size of the data header of the MAD.  This length
+ *   includes the common MAD, RMPP, and class specific headers.
+ * @data_len: Indicates the total size of user-transferred data.
+ * @seg_count: The number of RMPP segments allocated for this send.
+ * @seg_size: Size of each RMPP segment.
+ * @timeout_ms: Time to wait for a response.
+ * @retries: Number of times to retry a request for a response.  For MADs
+ *   using RMPP, this applies per window.  On completion, returns the number
+ *   of retries needed to complete the transfer.
+ *
+ * Users are responsible for initializing the MAD buffer itself, with the
+ * exception of any RMPP header.  Additional segment buffer space allocated
+ * beyond data_len is padding.
+ */
+struct ib_mad_send_buf {
+	struct ib_mad_send_buf	*next;
+	void			*mad;
+	struct ib_mad_agent	*mad_agent;
+	struct ib_ah		*ah;
+	void			*context[2];
+	int			hdr_len;
+	int			data_len;
+	int			seg_count;
+	int			seg_size;
+	int			timeout_ms;
+	int			retries;
+};
+
+/**
+ * ib_response_mad - Returns if the specified MAD has been generated in
+ *   response to a sent request or trap.
+ */
+int ib_response_mad(struct ib_mad *mad);
+
+/**
+ * ib_get_rmpp_resptime - Returns the RMPP response time.
+ * @rmpp_hdr: An RMPP header.
+ */
+static inline u8 ib_get_rmpp_resptime(struct ib_rmpp_hdr *rmpp_hdr)
+{
+	return rmpp_hdr->rmpp_rtime_flags >> 3;
+}
+
+/**
+ * ib_get_rmpp_flags - Returns the RMPP flags.
+ * @rmpp_hdr: An RMPP header.
+ */
+static inline u8 ib_get_rmpp_flags(struct ib_rmpp_hdr *rmpp_hdr)
+{
+	return rmpp_hdr->rmpp_rtime_flags & 0x7;
+}
+
+/**
+ * ib_set_rmpp_resptime - Sets the response time in an RMPP header.
+ * @rmpp_hdr: An RMPP header.
+ * @rtime: The response time to set.
+ */
+static inline void ib_set_rmpp_resptime(struct ib_rmpp_hdr *rmpp_hdr, u8 rtime)
+{
+	rmpp_hdr->rmpp_rtime_flags = ib_get_rmpp_flags(rmpp_hdr) | (rtime << 3);
+}
+
+/**
+ * ib_set_rmpp_flags - Sets the flags in an RMPP header.
+ * @rmpp_hdr: An RMPP header.
+ * @flags: The flags to set.
+ */
+static inline void ib_set_rmpp_flags(struct ib_rmpp_hdr *rmpp_hdr, u8 flags)
+{
+	rmpp_hdr->rmpp_rtime_flags = (rmpp_hdr->rmpp_rtime_flags & 0xF8) |
+				     (flags & 0x7);
+}
+
+struct ib_mad_agent;
+struct ib_mad_send_wc;
+struct ib_mad_recv_wc;
+
+/**
+ * ib_mad_send_handler - callback handler for a sent MAD.
+ * @mad_agent: MAD agent that sent the MAD.
+ * @mad_send_wc: Send work completion information on the sent MAD.
+ */
+typedef void (*ib_mad_send_handler)(struct ib_mad_agent *mad_agent,
+				    struct ib_mad_send_wc *mad_send_wc);
+
+/**
+ * ib_mad_snoop_handler - Callback handler for snooping sent MADs.
+ * @mad_agent: MAD agent that snooped the MAD.
+ * @send_wr: Work request information on the sent MAD.
+ * @mad_send_wc: Work completion information on the sent MAD.  Valid
+ *   only for snooping that occurs on a send completion.
+ *
+ * Clients snooping MADs should not modify data referenced by the @send_wr
+ * or @mad_send_wc.
+ */
+typedef void (*ib_mad_snoop_handler)(struct ib_mad_agent *mad_agent,
+				     struct ib_mad_send_buf *send_buf,
+				     struct ib_mad_send_wc *mad_send_wc);
+
+/**
+ * ib_mad_recv_handler - callback handler for a received MAD.
+ * @mad_agent: MAD agent requesting the received MAD.
+ * @mad_recv_wc: Received work completion information on the received MAD.
+ *
+ * MADs received in response to a send request operation will be handed to
+ * the user before the send operation completes.  All data buffers given
+ * to registered agents through this routine are owned by the receiving
+ * client, except for snooping agents.  Clients snooping MADs should not
+ * modify the data referenced by @mad_recv_wc.
+ */
+typedef void (*ib_mad_recv_handler)(struct ib_mad_agent *mad_agent,
+				    struct ib_mad_recv_wc *mad_recv_wc);
+
+/**
+ * ib_mad_agent - Used to track MAD registration with the access layer.
+ * @device: Reference to device registration is on.
+ * @qp: Reference to QP used for sending and receiving MADs.
+ * @mr: Memory region for system memory usable for DMA.
+ * @recv_handler: Callback handler for a received MAD.
+ * @send_handler: Callback handler for a sent MAD.
+ * @snoop_handler: Callback handler for snooped sent MADs.
+ * @context: User-specified context associated with this registration.
+ * @hi_tid: Access layer assigned transaction ID for this client.
+ *   Unsolicited MADs sent by this client will have the upper 32-bits
+ *   of their TID set to this value.
+ * @port_num: Port number on which QP is registered
+ * @rmpp_version: If set, indicates the RMPP version used by this agent.
+ */
+struct ib_mad_agent {
+	struct ib_device	*device;
+	struct ib_qp		*qp;
+	struct ib_mr		*mr;
+	ib_mad_recv_handler	recv_handler;
+	ib_mad_send_handler	send_handler;
+	ib_mad_snoop_handler	snoop_handler;
+	void			*context;
+	u32			hi_tid;
+	u8			port_num;
+	u8			rmpp_version;
+};
+
+/**
+ * ib_mad_send_wc - MAD send completion information.
+ * @send_buf: Send MAD data buffer associated with the send MAD request.
+ * @status: Completion status.
+ * @vendor_err: Optional vendor error information returned with a failed
+ *   request.
+ */
+struct ib_mad_send_wc {
+	struct ib_mad_send_buf	*send_buf;
+	enum ib_wc_status	status;
+	u32			vendor_err;
+};
+
+/**
+ * ib_mad_recv_buf - received MAD buffer information.
+ * @list: Reference to next data buffer for a received RMPP MAD.
+ * @grh: References a data buffer containing the global route header.
+ *   The data refereced by this buffer is only valid if the GRH is
+ *   valid.
+ * @mad: References the start of the received MAD.
+ */
+struct ib_mad_recv_buf {
+	struct list_head	list;
+	struct ib_grh		*grh;
+	struct ib_mad		*mad;
+};
+
+/**
+ * ib_mad_recv_wc - received MAD information.
+ * @wc: Completion information for the received data.
+ * @recv_buf: Specifies the location of the received data buffer(s).
+ * @rmpp_list: Specifies a list of RMPP reassembled received MAD buffers.
+ * @mad_len: The length of the received MAD, without duplicated headers.
+ *
+ * For received response, the wr_id contains a pointer to the ib_mad_send_buf
+ *   for the corresponding send request.
+ */
+struct ib_mad_recv_wc {
+	struct ib_wc		*wc;
+	struct ib_mad_recv_buf	recv_buf;
+	struct list_head	rmpp_list;
+	int			mad_len;
+};
+
+/**
+ * ib_mad_reg_req - MAD registration request
+ * @mgmt_class: Indicates which management class of MADs should be receive
+ *   by the caller.  This field is only required if the user wishes to
+ *   receive unsolicited MADs, otherwise it should be 0.
+ * @mgmt_class_version: Indicates which version of MADs for the given
+ *   management class to receive.
+ * @oui: Indicates IEEE OUI when mgmt_class is a vendor class
+ *   in the range from 0x30 to 0x4f. Otherwise not used.
+ * @method_mask: The caller will receive unsolicited MADs for any method
+ *   where @method_mask = 1.
+ */
+struct ib_mad_reg_req {
+	u8	mgmt_class;
+	u8	mgmt_class_version;
+	u8	oui[3];
+	DECLARE_BITMAP(method_mask, IB_MGMT_MAX_METHODS);
+};
+
+/**
+ * ib_register_mad_agent - Register to send/receive MADs.
+ * @device: The device to register with.
+ * @port_num: The port on the specified device to use.
+ * @qp_type: Specifies which QP to access.  Must be either
+ *   IB_QPT_SMI or IB_QPT_GSI.
+ * @mad_reg_req: Specifies which unsolicited MADs should be received
+ *   by the caller.  This parameter may be NULL if the caller only
+ *   wishes to receive solicited responses.
+ * @rmpp_version: If set, indicates that the client will send
+ *   and receive MADs that contain the RMPP header for the given version.
+ *   If set to 0, indicates that RMPP is not used by this client.
+ * @send_handler: The completion callback routine invoked after a send
+ *   request has completed.
+ * @recv_handler: The completion callback routine invoked for a received
+ *   MAD.
+ * @context: User specified context associated with the registration.
+ */
+struct ib_mad_agent *ib_register_mad_agent(struct ib_device *device,
+					   u8 port_num,
+					   enum ib_qp_type qp_type,
+					   struct ib_mad_reg_req *mad_reg_req,
+					   u8 rmpp_version,
+					   ib_mad_send_handler send_handler,
+					   ib_mad_recv_handler recv_handler,
+					   void *context);
+
+enum ib_mad_snoop_flags {
+	/*IB_MAD_SNOOP_POSTED_SENDS	   = 1,*/
+	/*IB_MAD_SNOOP_RMPP_SENDS	   = (1<<1),*/
+	IB_MAD_SNOOP_SEND_COMPLETIONS	   = (1<<2),
+	/*IB_MAD_SNOOP_RMPP_SEND_COMPLETIONS = (1<<3),*/
+	IB_MAD_SNOOP_RECVS		   = (1<<4)
+	/*IB_MAD_SNOOP_RMPP_RECVS	   = (1<<5),*/
+	/*IB_MAD_SNOOP_REDIRECTED_QPS	   = (1<<6)*/
+};
+
+/**
+ * ib_register_mad_snoop - Register to snoop sent and received MADs.
+ * @device: The device to register with.
+ * @port_num: The port on the specified device to use.
+ * @qp_type: Specifies which QP traffic to snoop.  Must be either
+ *   IB_QPT_SMI or IB_QPT_GSI.
+ * @mad_snoop_flags: Specifies information where snooping occurs.
+ * @send_handler: The callback routine invoked for a snooped send.
+ * @recv_handler: The callback routine invoked for a snooped receive.
+ * @context: User specified context associated with the registration.
+ */
+struct ib_mad_agent *ib_register_mad_snoop(struct ib_device *device,
+					   u8 port_num,
+					   enum ib_qp_type qp_type,
+					   int mad_snoop_flags,
+					   ib_mad_snoop_handler snoop_handler,
+					   ib_mad_recv_handler recv_handler,
+					   void *context);
+
+/**
+ * ib_unregister_mad_agent - Unregisters a client from using MAD services.
+ * @mad_agent: Corresponding MAD registration request to deregister.
+ *
+ * After invoking this routine, MAD services are no longer usable by the
+ * client on the associated QP.
+ */
+int ib_unregister_mad_agent(struct ib_mad_agent *mad_agent);
+
+/**
+ * ib_post_send_mad - Posts MAD(s) to the send queue of the QP associated
+ *   with the registered client.
+ * @send_buf: Specifies the information needed to send the MAD(s).
+ * @bad_send_buf: Specifies the MAD on which an error was encountered.  This
+ *   parameter is optional if only a single MAD is posted.
+ *
+ * Sent MADs are not guaranteed to complete in the order that they were posted.
+ *
+ * If the MAD requires RMPP, the data buffer should contain a single copy
+ * of the common MAD, RMPP, and class specific headers, followed by the class
+ * defined data.  If the class defined data would not divide evenly into
+ * RMPP segments, then space must be allocated at the end of the referenced
+ * buffer for any required padding.  To indicate the amount of class defined
+ * data being transferred, the paylen_newwin field in the RMPP header should
+ * be set to the size of the class specific header plus the amount of class
+ * defined data being transferred.  The paylen_newwin field should be
+ * specified in network-byte order.
+ */
+int ib_post_send_mad(struct ib_mad_send_buf *send_buf,
+		     struct ib_mad_send_buf **bad_send_buf);
+
+
+/**
+ * ib_free_recv_mad - Returns data buffers used to receive a MAD.
+ * @mad_recv_wc: Work completion information for a received MAD.
+ *
+ * Clients receiving MADs through their ib_mad_recv_handler must call this
+ * routine to return the work completion buffers to the access layer.
+ */
+void ib_free_recv_mad(struct ib_mad_recv_wc *mad_recv_wc);
+
+/**
+ * ib_cancel_mad - Cancels an outstanding send MAD operation.
+ * @mad_agent: Specifies the registration associated with sent MAD.
+ * @send_buf: Indicates the MAD to cancel.
+ *
+ * MADs will be returned to the user through the corresponding
+ * ib_mad_send_handler.
+ */
+void ib_cancel_mad(struct ib_mad_agent *mad_agent,
+		   struct ib_mad_send_buf *send_buf);
+
+/**
+ * ib_modify_mad - Modifies an outstanding send MAD operation.
+ * @mad_agent: Specifies the registration associated with sent MAD.
+ * @send_buf: Indicates the MAD to modify.
+ * @timeout_ms: New timeout value for sent MAD.
+ *
+ * This call will reset the timeout value for a sent MAD to the specified
+ * value.
+ */
+int ib_modify_mad(struct ib_mad_agent *mad_agent,
+		  struct ib_mad_send_buf *send_buf, u32 timeout_ms);
+
+/**
+ * ib_redirect_mad_qp - Registers a QP for MAD services.
+ * @qp: Reference to a QP that requires MAD services.
+ * @rmpp_version: If set, indicates that the client will send
+ *   and receive MADs that contain the RMPP header for the given version.
+ *   If set to 0, indicates that RMPP is not used by this client.
+ * @send_handler: The completion callback routine invoked after a send
+ *   request has completed.
+ * @recv_handler: The completion callback routine invoked for a received
+ *   MAD.
+ * @context: User specified context associated with the registration.
+ *
+ * Use of this call allows clients to use MAD services, such as RMPP,
+ * on user-owned QPs.  After calling this routine, users may send
+ * MADs on the specified QP by calling ib_mad_post_send.
+ */
+struct ib_mad_agent *ib_redirect_mad_qp(struct ib_qp *qp,
+					u8 rmpp_version,
+					ib_mad_send_handler send_handler,
+					ib_mad_recv_handler recv_handler,
+					void *context);
+
+/**
+ * ib_process_mad_wc - Processes a work completion associated with a
+ *   MAD sent or received on a redirected QP.
+ * @mad_agent: Specifies the registered MAD service using the redirected QP.
+ * @wc: References a work completion associated with a sent or received
+ *   MAD segment.
+ *
+ * This routine is used to complete or continue processing on a MAD request.
+ * If the work completion is associated with a send operation, calling
+ * this routine is required to continue an RMPP transfer or to wait for a
+ * corresponding response, if it is a request.  If the work completion is
+ * associated with a receive operation, calling this routine is required to
+ * process an inbound or outbound RMPP transfer, or to match a response MAD
+ * with its corresponding request.
+ */
+int ib_process_mad_wc(struct ib_mad_agent *mad_agent,
+		      struct ib_wc *wc);
+
+/**
+ * ib_create_send_mad - Allocate and initialize a data buffer and work request
+ *   for sending a MAD.
+ * @mad_agent: Specifies the registered MAD service to associate with the MAD.
+ * @remote_qpn: Specifies the QPN of the receiving node.
+ * @pkey_index: Specifies which PKey the MAD will be sent using.  This field
+ *   is valid only if the remote_qpn is QP 1.
+ * @rmpp_active: Indicates if the send will enable RMPP.
+ * @hdr_len: Indicates the size of the data header of the MAD.  This length
+ *   should include the common MAD header, RMPP header, plus any class
+ *   specific header.
+ * @data_len: Indicates the size of any user-transferred data.  The call will
+ *   automatically adjust the allocated buffer size to account for any
+ *   additional padding that may be necessary.
+ * @gfp_mask: GFP mask used for the memory allocation.
+ *
+ * This routine allocates a MAD for sending.  The returned MAD send buffer
+ * will reference a data buffer usable for sending a MAD, along
+ * with an initialized work request structure.  Users may modify the returned
+ * MAD data buffer before posting the send.
+ *
+ * The returned MAD header, class specific headers, and any padding will be
+ * cleared.  Users are responsible for initializing the common MAD header,
+ * any class specific header, and MAD data area.
+ * If @rmpp_active is set, the RMPP header will be initialized for sending.
+ */
+struct ib_mad_send_buf *ib_create_send_mad(struct ib_mad_agent *mad_agent,
+					   u32 remote_qpn, u16 pkey_index,
+					   int rmpp_active,
+					   int hdr_len, int data_len,
+					   gfp_t gfp_mask);
+
+/**
+ * ib_is_mad_class_rmpp - returns whether given management class
+ * supports RMPP.
+ * @mgmt_class: management class
+ *
+ * This routine returns whether the management class supports RMPP.
+ */
+int ib_is_mad_class_rmpp(u8 mgmt_class);
+
+/**
+ * ib_get_mad_data_offset - returns the data offset for a given
+ * management class.
+ * @mgmt_class: management class
+ *
+ * This routine returns the data offset in the MAD for the management
+ * class requested.
+ */
+int ib_get_mad_data_offset(u8 mgmt_class);
+
+/**
+ * ib_get_rmpp_segment - returns the data buffer for a given RMPP segment.
+ * @send_buf: Previously allocated send data buffer.
+ * @seg_num: number of segment to return
+ *
+ * This routine returns a pointer to the data buffer of an RMPP MAD.
+ * Users must provide synchronization to @send_buf around this call.
+ */
+void *ib_get_rmpp_segment(struct ib_mad_send_buf *send_buf, int seg_num);
+
+/**
+ * ib_free_send_mad - Returns data buffers used to send a MAD.
+ * @send_buf: Previously allocated send data buffer.
+ */
+void ib_free_send_mad(struct ib_mad_send_buf *send_buf);
+
+#endif /* IB_MAD_H */
diff --git a/include/rdma/ib_marshall.h b/include/rdma/ib_marshall.h
new file mode 100644
index 00000000..db037205
--- /dev/null
+++ b/include/rdma/ib_marshall.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (c) 2005-2006 Intel Corporation.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#if !defined(IB_USER_MARSHALL_H)
+#define IB_USER_MARSHALL_H
+
+#include <rdma/ib_verbs.h>
+#include <rdma/ib_sa.h>
+#include <rdma/ib_user_verbs.h>
+#include <rdma/ib_user_sa.h>
+
+void ib_copy_qp_attr_to_user(struct ib_uverbs_qp_attr *dst,
+			     struct ib_qp_attr *src);
+
+void ib_copy_ah_attr_to_user(struct ib_uverbs_ah_attr *dst,
+			     struct ib_ah_attr *src);
+
+void ib_copy_path_rec_to_user(struct ib_user_path_rec *dst,
+			      struct ib_sa_path_rec *src);
+
+void ib_copy_path_rec_from_user(struct ib_sa_path_rec *dst,
+				struct ib_user_path_rec *src);
+
+#endif /* IB_USER_MARSHALL_H */
diff --git a/include/rdma/ib_pack.h b/include/rdma/ib_pack.h
new file mode 100644
index 00000000..b37fe3b1
--- /dev/null
+++ b/include/rdma/ib_pack.h
@@ -0,0 +1,267 @@
+/*
+ * Copyright (c) 2004 Topspin Corporation.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef IB_PACK_H
+#define IB_PACK_H
+
+#include <rdma/ib_verbs.h>
+
+enum {
+	IB_LRH_BYTES  = 8,
+	IB_ETH_BYTES  = 14,
+	IB_VLAN_BYTES = 4,
+	IB_GRH_BYTES  = 40,
+	IB_BTH_BYTES  = 12,
+	IB_DETH_BYTES = 8
+};
+
+struct ib_field {
+	size_t struct_offset_bytes;
+	size_t struct_size_bytes;
+	int    offset_words;
+	int    offset_bits;
+	int    size_bits;
+	char  *field_name;
+};
+
+#define RESERVED \
+	.field_name          = "reserved"
+
+/*
+ * This macro cleans up the definitions of constants for BTH opcodes.
+ * It is used to define constants such as IB_OPCODE_UD_SEND_ONLY,
+ * which becomes IB_OPCODE_UD + IB_OPCODE_SEND_ONLY, and this gives
+ * the correct value.
+ *
+ * In short, user code should use the constants defined using the
+ * macro rather than worrying about adding together other constants.
+*/
+#define IB_OPCODE(transport, op) \
+	IB_OPCODE_ ## transport ## _ ## op = \
+		IB_OPCODE_ ## transport + IB_OPCODE_ ## op
+
+enum {
+	/* transport types -- just used to define real constants */
+	IB_OPCODE_RC                                = 0x00,
+	IB_OPCODE_UC                                = 0x20,
+	IB_OPCODE_RD                                = 0x40,
+	IB_OPCODE_UD                                = 0x60,
+
+	/* operations -- just used to define real constants */
+	IB_OPCODE_SEND_FIRST                        = 0x00,
+	IB_OPCODE_SEND_MIDDLE                       = 0x01,
+	IB_OPCODE_SEND_LAST                         = 0x02,
+	IB_OPCODE_SEND_LAST_WITH_IMMEDIATE          = 0x03,
+	IB_OPCODE_SEND_ONLY                         = 0x04,
+	IB_OPCODE_SEND_ONLY_WITH_IMMEDIATE          = 0x05,
+	IB_OPCODE_RDMA_WRITE_FIRST                  = 0x06,
+	IB_OPCODE_RDMA_WRITE_MIDDLE                 = 0x07,
+	IB_OPCODE_RDMA_WRITE_LAST                   = 0x08,
+	IB_OPCODE_RDMA_WRITE_LAST_WITH_IMMEDIATE    = 0x09,
+	IB_OPCODE_RDMA_WRITE_ONLY                   = 0x0a,
+	IB_OPCODE_RDMA_WRITE_ONLY_WITH_IMMEDIATE    = 0x0b,
+	IB_OPCODE_RDMA_READ_REQUEST                 = 0x0c,
+	IB_OPCODE_RDMA_READ_RESPONSE_FIRST          = 0x0d,
+	IB_OPCODE_RDMA_READ_RESPONSE_MIDDLE         = 0x0e,
+	IB_OPCODE_RDMA_READ_RESPONSE_LAST           = 0x0f,
+	IB_OPCODE_RDMA_READ_RESPONSE_ONLY           = 0x10,
+	IB_OPCODE_ACKNOWLEDGE                       = 0x11,
+	IB_OPCODE_ATOMIC_ACKNOWLEDGE                = 0x12,
+	IB_OPCODE_COMPARE_SWAP                      = 0x13,
+	IB_OPCODE_FETCH_ADD                         = 0x14,
+
+	/* real constants follow -- see comment about above IB_OPCODE()
+	   macro for more details */
+
+	/* RC */
+	IB_OPCODE(RC, SEND_FIRST),
+	IB_OPCODE(RC, SEND_MIDDLE),
+	IB_OPCODE(RC, SEND_LAST),
+	IB_OPCODE(RC, SEND_LAST_WITH_IMMEDIATE),
+	IB_OPCODE(RC, SEND_ONLY),
+	IB_OPCODE(RC, SEND_ONLY_WITH_IMMEDIATE),
+	IB_OPCODE(RC, RDMA_WRITE_FIRST),
+	IB_OPCODE(RC, RDMA_WRITE_MIDDLE),
+	IB_OPCODE(RC, RDMA_WRITE_LAST),
+	IB_OPCODE(RC, RDMA_WRITE_LAST_WITH_IMMEDIATE),
+	IB_OPCODE(RC, RDMA_WRITE_ONLY),
+	IB_OPCODE(RC, RDMA_WRITE_ONLY_WITH_IMMEDIATE),
+	IB_OPCODE(RC, RDMA_READ_REQUEST),
+	IB_OPCODE(RC, RDMA_READ_RESPONSE_FIRST),
+	IB_OPCODE(RC, RDMA_READ_RESPONSE_MIDDLE),
+	IB_OPCODE(RC, RDMA_READ_RESPONSE_LAST),
+	IB_OPCODE(RC, RDMA_READ_RESPONSE_ONLY),
+	IB_OPCODE(RC, ACKNOWLEDGE),
+	IB_OPCODE(RC, ATOMIC_ACKNOWLEDGE),
+	IB_OPCODE(RC, COMPARE_SWAP),
+	IB_OPCODE(RC, FETCH_ADD),
+
+	/* UC */
+	IB_OPCODE(UC, SEND_FIRST),
+	IB_OPCODE(UC, SEND_MIDDLE),
+	IB_OPCODE(UC, SEND_LAST),
+	IB_OPCODE(UC, SEND_LAST_WITH_IMMEDIATE),
+	IB_OPCODE(UC, SEND_ONLY),
+	IB_OPCODE(UC, SEND_ONLY_WITH_IMMEDIATE),
+	IB_OPCODE(UC, RDMA_WRITE_FIRST),
+	IB_OPCODE(UC, RDMA_WRITE_MIDDLE),
+	IB_OPCODE(UC, RDMA_WRITE_LAST),
+	IB_OPCODE(UC, RDMA_WRITE_LAST_WITH_IMMEDIATE),
+	IB_OPCODE(UC, RDMA_WRITE_ONLY),
+	IB_OPCODE(UC, RDMA_WRITE_ONLY_WITH_IMMEDIATE),
+
+	/* RD */
+	IB_OPCODE(RD, SEND_FIRST),
+	IB_OPCODE(RD, SEND_MIDDLE),
+	IB_OPCODE(RD, SEND_LAST),
+	IB_OPCODE(RD, SEND_LAST_WITH_IMMEDIATE),
+	IB_OPCODE(RD, SEND_ONLY),
+	IB_OPCODE(RD, SEND_ONLY_WITH_IMMEDIATE),
+	IB_OPCODE(RD, RDMA_WRITE_FIRST),
+	IB_OPCODE(RD, RDMA_WRITE_MIDDLE),
+	IB_OPCODE(RD, RDMA_WRITE_LAST),
+	IB_OPCODE(RD, RDMA_WRITE_LAST_WITH_IMMEDIATE),
+	IB_OPCODE(RD, RDMA_WRITE_ONLY),
+	IB_OPCODE(RD, RDMA_WRITE_ONLY_WITH_IMMEDIATE),
+	IB_OPCODE(RD, RDMA_READ_REQUEST),
+	IB_OPCODE(RD, RDMA_READ_RESPONSE_FIRST),
+	IB_OPCODE(RD, RDMA_READ_RESPONSE_MIDDLE),
+	IB_OPCODE(RD, RDMA_READ_RESPONSE_LAST),
+	IB_OPCODE(RD, RDMA_READ_RESPONSE_ONLY),
+	IB_OPCODE(RD, ACKNOWLEDGE),
+	IB_OPCODE(RD, ATOMIC_ACKNOWLEDGE),
+	IB_OPCODE(RD, COMPARE_SWAP),
+	IB_OPCODE(RD, FETCH_ADD),
+
+	/* UD */
+	IB_OPCODE(UD, SEND_ONLY),
+	IB_OPCODE(UD, SEND_ONLY_WITH_IMMEDIATE)
+};
+
+enum {
+	IB_LNH_RAW        = 0,
+	IB_LNH_IP         = 1,
+	IB_LNH_IBA_LOCAL  = 2,
+	IB_LNH_IBA_GLOBAL = 3
+};
+
+struct ib_unpacked_lrh {
+	u8        virtual_lane;
+	u8        link_version;
+	u8        service_level;
+	u8        link_next_header;
+	__be16    destination_lid;
+	__be16    packet_length;
+	__be16    source_lid;
+};
+
+struct ib_unpacked_grh {
+	u8    	     ip_version;
+	u8    	     traffic_class;
+	__be32 	     flow_label;
+	__be16       payload_length;
+	u8    	     next_header;
+	u8    	     hop_limit;
+	union ib_gid source_gid;
+	union ib_gid destination_gid;
+};
+
+struct ib_unpacked_bth {
+	u8           opcode;
+	u8           solicited_event;
+	u8           mig_req;
+	u8           pad_count;
+	u8           transport_header_version;
+	__be16       pkey;
+	__be32       destination_qpn;
+	u8           ack_req;
+	__be32       psn;
+};
+
+struct ib_unpacked_deth {
+	__be32       qkey;
+	__be32       source_qpn;
+};
+
+struct ib_unpacked_eth {
+	u8	dmac_h[4];
+	u8	dmac_l[2];
+	u8	smac_h[2];
+	u8	smac_l[4];
+	__be16	type;
+};
+
+struct ib_unpacked_vlan {
+	__be16  tag;
+	__be16  type;
+};
+
+struct ib_ud_header {
+	int                     lrh_present;
+	struct ib_unpacked_lrh  lrh;
+	int			eth_present;
+	struct ib_unpacked_eth	eth;
+	int                     vlan_present;
+	struct ib_unpacked_vlan vlan;
+	int			grh_present;
+	struct ib_unpacked_grh	grh;
+	struct ib_unpacked_bth	bth;
+	struct ib_unpacked_deth deth;
+	int			immediate_present;
+	__be32			immediate_data;
+};
+
+void ib_pack(const struct ib_field        *desc,
+	     int                           desc_len,
+	     void                         *structure,
+	     void                         *buf);
+
+void ib_unpack(const struct ib_field        *desc,
+	       int                           desc_len,
+	       void                         *buf,
+	       void                         *structure);
+
+void ib_ud_header_init(int		    payload_bytes,
+		       int		    lrh_present,
+		       int		    eth_present,
+		       int		    vlan_present,
+		       int		    grh_present,
+		       int		    immediate_present,
+		       struct ib_ud_header *header);
+
+int ib_ud_header_pack(struct ib_ud_header *header,
+		      void                *buf);
+
+int ib_ud_header_unpack(void                *buf,
+			struct ib_ud_header *header);
+
+#endif /* IB_PACK_H */
diff --git a/include/rdma/ib_pma.h b/include/rdma/ib_pma.h
new file mode 100644
index 00000000..a5889f18
--- /dev/null
+++ b/include/rdma/ib_pma.h
@@ -0,0 +1,156 @@
+/*
+ * Copyright (c) 2006, 2007, 2008, 2009, 2010 QLogic Corporation.
+ * All rights reserved.
+ * Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#if !defined(IB_PMA_H)
+#define IB_PMA_H
+
+#include <rdma/ib_mad.h>
+
+/*
+ * PMA class portinfo capability mask bits
+ */
+#define IB_PMA_CLASS_CAP_ALLPORTSELECT  cpu_to_be16(1 << 8)
+#define IB_PMA_CLASS_CAP_EXT_WIDTH      cpu_to_be16(1 << 9)
+#define IB_PMA_CLASS_CAP_XMIT_WAIT      cpu_to_be16(1 << 12)
+
+#define IB_PMA_CLASS_PORT_INFO          cpu_to_be16(0x0001)
+#define IB_PMA_PORT_SAMPLES_CONTROL     cpu_to_be16(0x0010)
+#define IB_PMA_PORT_SAMPLES_RESULT      cpu_to_be16(0x0011)
+#define IB_PMA_PORT_COUNTERS            cpu_to_be16(0x0012)
+#define IB_PMA_PORT_COUNTERS_EXT        cpu_to_be16(0x001D)
+#define IB_PMA_PORT_SAMPLES_RESULT_EXT  cpu_to_be16(0x001E)
+
+struct ib_pma_mad {
+	struct ib_mad_hdr mad_hdr;
+	u8 reserved[40];
+	u8 data[192];
+} __packed;
+
+struct ib_pma_portsamplescontrol {
+	u8 opcode;
+	u8 port_select;
+	u8 tick;
+	u8 counter_width;		/* resv: 7:3, counter width: 2:0 */
+	__be32 counter_mask0_9;		/* 2, 10 3-bit fields */
+	__be16 counter_mask10_14;	/* 1, 5 3-bit fields */
+	u8 sample_mechanisms;
+	u8 sample_status;		/* only lower 2 bits */
+	__be64 option_mask;
+	__be64 vendor_mask;
+	__be32 sample_start;
+	__be32 sample_interval;
+	__be16 tag;
+	__be16 counter_select[15];
+	__be32 reserved1;
+	__be64 samples_only_option_mask;
+	__be32 reserved2[28];
+};
+
+struct ib_pma_portsamplesresult {
+	__be16 tag;
+	__be16 sample_status;   /* only lower 2 bits */
+	__be32 counter[15];
+};
+
+struct ib_pma_portsamplesresult_ext {
+	__be16 tag;
+	__be16 sample_status;   /* only lower 2 bits */
+	__be32 extended_width;  /* only upper 2 bits */
+	__be64 counter[15];
+};
+
+struct ib_pma_portcounters {
+	u8 reserved;
+	u8 port_select;
+	__be16 counter_select;
+	__be16 symbol_error_counter;
+	u8 link_error_recovery_counter;
+	u8 link_downed_counter;
+	__be16 port_rcv_errors;
+	__be16 port_rcv_remphys_errors;
+	__be16 port_rcv_switch_relay_errors;
+	__be16 port_xmit_discards;
+	u8 port_xmit_constraint_errors;
+	u8 port_rcv_constraint_errors;
+	u8 reserved1;
+	u8 link_overrun_errors; /* LocalLink: 7:4, BufferOverrun: 3:0 */
+	__be16 reserved2;
+	__be16 vl15_dropped;
+	__be32 port_xmit_data;
+	__be32 port_rcv_data;
+	__be32 port_xmit_packets;
+	__be32 port_rcv_packets;
+	__be32 port_xmit_wait;
+} __packed;
+
+
+#define IB_PMA_SEL_SYMBOL_ERROR                 cpu_to_be16(0x0001)
+#define IB_PMA_SEL_LINK_ERROR_RECOVERY          cpu_to_be16(0x0002)
+#define IB_PMA_SEL_LINK_DOWNED                  cpu_to_be16(0x0004)
+#define IB_PMA_SEL_PORT_RCV_ERRORS              cpu_to_be16(0x0008)
+#define IB_PMA_SEL_PORT_RCV_REMPHYS_ERRORS      cpu_to_be16(0x0010)
+#define IB_PMA_SEL_PORT_XMIT_DISCARDS           cpu_to_be16(0x0040)
+#define IB_PMA_SEL_LOCAL_LINK_INTEGRITY_ERRORS  cpu_to_be16(0x0200)
+#define IB_PMA_SEL_EXCESSIVE_BUFFER_OVERRUNS    cpu_to_be16(0x0400)
+#define IB_PMA_SEL_PORT_VL15_DROPPED            cpu_to_be16(0x0800)
+#define IB_PMA_SEL_PORT_XMIT_DATA               cpu_to_be16(0x1000)
+#define IB_PMA_SEL_PORT_RCV_DATA                cpu_to_be16(0x2000)
+#define IB_PMA_SEL_PORT_XMIT_PACKETS            cpu_to_be16(0x4000)
+#define IB_PMA_SEL_PORT_RCV_PACKETS             cpu_to_be16(0x8000)
+
+struct ib_pma_portcounters_ext {
+	u8 reserved;
+	u8 port_select;
+	__be16 counter_select;
+	__be32 reserved1;
+	__be64 port_xmit_data;
+	__be64 port_rcv_data;
+	__be64 port_xmit_packets;
+	__be64 port_rcv_packets;
+	__be64 port_unicast_xmit_packets;
+	__be64 port_unicast_rcv_packets;
+	__be64 port_multicast_xmit_packets;
+	__be64 port_multicast_rcv_packets;
+} __packed;
+
+#define IB_PMA_SELX_PORT_XMIT_DATA              cpu_to_be16(0x0001)
+#define IB_PMA_SELX_PORT_RCV_DATA               cpu_to_be16(0x0002)
+#define IB_PMA_SELX_PORT_XMIT_PACKETS           cpu_to_be16(0x0004)
+#define IB_PMA_SELX_PORT_RCV_PACKETS            cpu_to_be16(0x0008)
+#define IB_PMA_SELX_PORT_UNI_XMIT_PACKETS       cpu_to_be16(0x0010)
+#define IB_PMA_SELX_PORT_UNI_RCV_PACKETS        cpu_to_be16(0x0020)
+#define IB_PMA_SELX_PORT_MULTI_XMIT_PACKETS     cpu_to_be16(0x0040)
+#define IB_PMA_SELX_PORT_MULTI_RCV_PACKETS      cpu_to_be16(0x0080)
+
+#endif /* IB_PMA_H */
diff --git a/include/rdma/ib_sa.h b/include/rdma/ib_sa.h
new file mode 100644
index 00000000..d44a5638
--- /dev/null
+++ b/include/rdma/ib_sa.h
@@ -0,0 +1,388 @@
+/*
+ * Copyright (c) 2004 Topspin Communications.  All rights reserved.
+ * Copyright (c) 2005 Voltaire, Inc.  All rights reserved.
+ * Copyright (c) 2006 Intel Corporation.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef IB_SA_H
+#define IB_SA_H
+
+#include <linux/completion.h>
+#include <linux/compiler.h>
+
+#include <linux/atomic.h>
+
+#include <rdma/ib_verbs.h>
+#include <rdma/ib_mad.h>
+
+enum {
+	IB_SA_CLASS_VERSION		= 2,	/* IB spec version 1.1/1.2 */
+
+	IB_SA_METHOD_GET_TABLE		= 0x12,
+	IB_SA_METHOD_GET_TABLE_RESP	= 0x92,
+	IB_SA_METHOD_DELETE		= 0x15,
+	IB_SA_METHOD_DELETE_RESP	= 0x95,
+	IB_SA_METHOD_GET_MULTI		= 0x14,
+	IB_SA_METHOD_GET_MULTI_RESP	= 0x94,
+	IB_SA_METHOD_GET_TRACE_TBL	= 0x13
+};
+
+enum {
+	IB_SA_ATTR_CLASS_PORTINFO    = 0x01,
+	IB_SA_ATTR_NOTICE	     = 0x02,
+	IB_SA_ATTR_INFORM_INFO	     = 0x03,
+	IB_SA_ATTR_NODE_REC	     = 0x11,
+	IB_SA_ATTR_PORT_INFO_REC     = 0x12,
+	IB_SA_ATTR_SL2VL_REC	     = 0x13,
+	IB_SA_ATTR_SWITCH_REC	     = 0x14,
+	IB_SA_ATTR_LINEAR_FDB_REC    = 0x15,
+	IB_SA_ATTR_RANDOM_FDB_REC    = 0x16,
+	IB_SA_ATTR_MCAST_FDB_REC     = 0x17,
+	IB_SA_ATTR_SM_INFO_REC	     = 0x18,
+	IB_SA_ATTR_LINK_REC	     = 0x20,
+	IB_SA_ATTR_GUID_INFO_REC     = 0x30,
+	IB_SA_ATTR_SERVICE_REC	     = 0x31,
+	IB_SA_ATTR_PARTITION_REC     = 0x33,
+	IB_SA_ATTR_PATH_REC	     = 0x35,
+	IB_SA_ATTR_VL_ARB_REC	     = 0x36,
+	IB_SA_ATTR_MC_MEMBER_REC     = 0x38,
+	IB_SA_ATTR_TRACE_REC	     = 0x39,
+	IB_SA_ATTR_MULTI_PATH_REC    = 0x3a,
+	IB_SA_ATTR_SERVICE_ASSOC_REC = 0x3b,
+	IB_SA_ATTR_INFORM_INFO_REC   = 0xf3
+};
+
+enum ib_sa_selector {
+	IB_SA_GT   = 0,
+	IB_SA_LT   = 1,
+	IB_SA_EQ   = 2,
+	/*
+	 * The meaning of "best" depends on the attribute: for
+	 * example, for MTU best will return the largest available
+	 * MTU, while for packet life time, best will return the
+	 * smallest available life time.
+	 */
+	IB_SA_BEST = 3
+};
+
+/*
+ * Structures for SA records are named "struct ib_sa_xxx_rec."  No
+ * attempt is made to pack structures to match the physical layout of
+ * SA records in SA MADs; all packing and unpacking is handled by the
+ * SA query code.
+ *
+ * For a record with structure ib_sa_xxx_rec, the naming convention
+ * for the component mask value for field yyy is IB_SA_XXX_REC_YYY (we
+ * never use different abbreviations or otherwise change the spelling
+ * of xxx/yyy between ib_sa_xxx_rec.yyy and IB_SA_XXX_REC_YYY).
+ *
+ * Reserved rows are indicated with comments to help maintainability.
+ */
+
+#define IB_SA_PATH_REC_SERVICE_ID		       (IB_SA_COMP_MASK( 0) |\
+							IB_SA_COMP_MASK( 1))
+#define IB_SA_PATH_REC_DGID				IB_SA_COMP_MASK( 2)
+#define IB_SA_PATH_REC_SGID				IB_SA_COMP_MASK( 3)
+#define IB_SA_PATH_REC_DLID				IB_SA_COMP_MASK( 4)
+#define IB_SA_PATH_REC_SLID				IB_SA_COMP_MASK( 5)
+#define IB_SA_PATH_REC_RAW_TRAFFIC			IB_SA_COMP_MASK( 6)
+/* reserved:								 7 */
+#define IB_SA_PATH_REC_FLOW_LABEL       		IB_SA_COMP_MASK( 8)
+#define IB_SA_PATH_REC_HOP_LIMIT			IB_SA_COMP_MASK( 9)
+#define IB_SA_PATH_REC_TRAFFIC_CLASS			IB_SA_COMP_MASK(10)
+#define IB_SA_PATH_REC_REVERSIBLE			IB_SA_COMP_MASK(11)
+#define IB_SA_PATH_REC_NUMB_PATH			IB_SA_COMP_MASK(12)
+#define IB_SA_PATH_REC_PKEY				IB_SA_COMP_MASK(13)
+#define IB_SA_PATH_REC_QOS_CLASS			IB_SA_COMP_MASK(14)
+#define IB_SA_PATH_REC_SL				IB_SA_COMP_MASK(15)
+#define IB_SA_PATH_REC_MTU_SELECTOR			IB_SA_COMP_MASK(16)
+#define IB_SA_PATH_REC_MTU				IB_SA_COMP_MASK(17)
+#define IB_SA_PATH_REC_RATE_SELECTOR			IB_SA_COMP_MASK(18)
+#define IB_SA_PATH_REC_RATE				IB_SA_COMP_MASK(19)
+#define IB_SA_PATH_REC_PACKET_LIFE_TIME_SELECTOR	IB_SA_COMP_MASK(20)
+#define IB_SA_PATH_REC_PACKET_LIFE_TIME			IB_SA_COMP_MASK(21)
+#define IB_SA_PATH_REC_PREFERENCE			IB_SA_COMP_MASK(22)
+
+struct ib_sa_path_rec {
+	__be64       service_id;
+	union ib_gid dgid;
+	union ib_gid sgid;
+	__be16       dlid;
+	__be16       slid;
+	int          raw_traffic;
+	/* reserved */
+	__be32       flow_label;
+	u8           hop_limit;
+	u8           traffic_class;
+	int          reversible;
+	u8           numb_path;
+	__be16       pkey;
+	__be16       qos_class;
+	u8           sl;
+	u8           mtu_selector;
+	u8           mtu;
+	u8           rate_selector;
+	u8           rate;
+	u8           packet_life_time_selector;
+	u8           packet_life_time;
+	u8           preference;
+};
+
+#define IB_SA_MCMEMBER_REC_MGID				IB_SA_COMP_MASK( 0)
+#define IB_SA_MCMEMBER_REC_PORT_GID			IB_SA_COMP_MASK( 1)
+#define IB_SA_MCMEMBER_REC_QKEY				IB_SA_COMP_MASK( 2)
+#define IB_SA_MCMEMBER_REC_MLID				IB_SA_COMP_MASK( 3)
+#define IB_SA_MCMEMBER_REC_MTU_SELECTOR			IB_SA_COMP_MASK( 4)
+#define IB_SA_MCMEMBER_REC_MTU				IB_SA_COMP_MASK( 5)
+#define IB_SA_MCMEMBER_REC_TRAFFIC_CLASS		IB_SA_COMP_MASK( 6)
+#define IB_SA_MCMEMBER_REC_PKEY				IB_SA_COMP_MASK( 7)
+#define IB_SA_MCMEMBER_REC_RATE_SELECTOR		IB_SA_COMP_MASK( 8)
+#define IB_SA_MCMEMBER_REC_RATE				IB_SA_COMP_MASK( 9)
+#define IB_SA_MCMEMBER_REC_PACKET_LIFE_TIME_SELECTOR	IB_SA_COMP_MASK(10)
+#define IB_SA_MCMEMBER_REC_PACKET_LIFE_TIME		IB_SA_COMP_MASK(11)
+#define IB_SA_MCMEMBER_REC_SL				IB_SA_COMP_MASK(12)
+#define IB_SA_MCMEMBER_REC_FLOW_LABEL			IB_SA_COMP_MASK(13)
+#define IB_SA_MCMEMBER_REC_HOP_LIMIT			IB_SA_COMP_MASK(14)
+#define IB_SA_MCMEMBER_REC_SCOPE			IB_SA_COMP_MASK(15)
+#define IB_SA_MCMEMBER_REC_JOIN_STATE			IB_SA_COMP_MASK(16)
+#define IB_SA_MCMEMBER_REC_PROXY_JOIN			IB_SA_COMP_MASK(17)
+
+struct ib_sa_mcmember_rec {
+	union ib_gid mgid;
+	union ib_gid port_gid;
+	__be32       qkey;
+	__be16       mlid;
+	u8           mtu_selector;
+	u8           mtu;
+	u8           traffic_class;
+	__be16       pkey;
+	u8 	     rate_selector;
+	u8 	     rate;
+	u8 	     packet_life_time_selector;
+	u8 	     packet_life_time;
+	u8           sl;
+	__be32       flow_label;
+	u8           hop_limit;
+	u8           scope;
+	u8           join_state;
+	int          proxy_join;
+};
+
+/* Service Record Component Mask Sec 15.2.5.14 Ver 1.1	*/
+#define IB_SA_SERVICE_REC_SERVICE_ID			IB_SA_COMP_MASK( 0)
+#define IB_SA_SERVICE_REC_SERVICE_GID			IB_SA_COMP_MASK( 1)
+#define IB_SA_SERVICE_REC_SERVICE_PKEY			IB_SA_COMP_MASK( 2)
+/* reserved:								 3 */
+#define IB_SA_SERVICE_REC_SERVICE_LEASE			IB_SA_COMP_MASK( 4)
+#define IB_SA_SERVICE_REC_SERVICE_KEY			IB_SA_COMP_MASK( 5)
+#define IB_SA_SERVICE_REC_SERVICE_NAME			IB_SA_COMP_MASK( 6)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_0		IB_SA_COMP_MASK( 7)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_1		IB_SA_COMP_MASK( 8)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_2		IB_SA_COMP_MASK( 9)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_3		IB_SA_COMP_MASK(10)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_4		IB_SA_COMP_MASK(11)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_5		IB_SA_COMP_MASK(12)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_6		IB_SA_COMP_MASK(13)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_7		IB_SA_COMP_MASK(14)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_8		IB_SA_COMP_MASK(15)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_9		IB_SA_COMP_MASK(16)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_10		IB_SA_COMP_MASK(17)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_11		IB_SA_COMP_MASK(18)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_12		IB_SA_COMP_MASK(19)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_13		IB_SA_COMP_MASK(20)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_14		IB_SA_COMP_MASK(21)
+#define IB_SA_SERVICE_REC_SERVICE_DATA8_15		IB_SA_COMP_MASK(22)
+#define IB_SA_SERVICE_REC_SERVICE_DATA16_0		IB_SA_COMP_MASK(23)
+#define IB_SA_SERVICE_REC_SERVICE_DATA16_1		IB_SA_COMP_MASK(24)
+#define IB_SA_SERVICE_REC_SERVICE_DATA16_2		IB_SA_COMP_MASK(25)
+#define IB_SA_SERVICE_REC_SERVICE_DATA16_3		IB_SA_COMP_MASK(26)
+#define IB_SA_SERVICE_REC_SERVICE_DATA16_4		IB_SA_COMP_MASK(27)
+#define IB_SA_SERVICE_REC_SERVICE_DATA16_5		IB_SA_COMP_MASK(28)
+#define IB_SA_SERVICE_REC_SERVICE_DATA16_6		IB_SA_COMP_MASK(29)
+#define IB_SA_SERVICE_REC_SERVICE_DATA16_7		IB_SA_COMP_MASK(30)
+#define IB_SA_SERVICE_REC_SERVICE_DATA32_0		IB_SA_COMP_MASK(31)
+#define IB_SA_SERVICE_REC_SERVICE_DATA32_1		IB_SA_COMP_MASK(32)
+#define IB_SA_SERVICE_REC_SERVICE_DATA32_2		IB_SA_COMP_MASK(33)
+#define IB_SA_SERVICE_REC_SERVICE_DATA32_3		IB_SA_COMP_MASK(34)
+#define IB_SA_SERVICE_REC_SERVICE_DATA64_0		IB_SA_COMP_MASK(35)
+#define IB_SA_SERVICE_REC_SERVICE_DATA64_1		IB_SA_COMP_MASK(36)
+
+#define IB_DEFAULT_SERVICE_LEASE 	0xFFFFFFFF
+
+struct ib_sa_service_rec {
+	u64		id;
+	union ib_gid	gid;
+	__be16 		pkey;
+	/* reserved */
+	u32		lease;
+	u8		key[16];
+	u8		name[64];
+	u8		data8[16];
+	u16		data16[8];
+	u32		data32[4];
+	u64		data64[2];
+};
+
+struct ib_sa_client {
+	atomic_t users;
+	struct completion comp;
+};
+
+/**
+ * ib_sa_register_client - Register an SA client.
+ */
+void ib_sa_register_client(struct ib_sa_client *client);
+
+/**
+ * ib_sa_unregister_client - Deregister an SA client.
+ * @client: Client object to deregister.
+ */
+void ib_sa_unregister_client(struct ib_sa_client *client);
+
+struct ib_sa_query;
+
+void ib_sa_cancel_query(int id, struct ib_sa_query *query);
+
+int ib_sa_path_rec_get(struct ib_sa_client *client,
+		       struct ib_device *device, u8 port_num,
+		       struct ib_sa_path_rec *rec,
+		       ib_sa_comp_mask comp_mask,
+		       int timeout_ms, gfp_t gfp_mask,
+		       void (*callback)(int status,
+					struct ib_sa_path_rec *resp,
+					void *context),
+		       void *context,
+		       struct ib_sa_query **query);
+
+int ib_sa_service_rec_query(struct ib_sa_client *client,
+			 struct ib_device *device, u8 port_num,
+			 u8 method,
+			 struct ib_sa_service_rec *rec,
+			 ib_sa_comp_mask comp_mask,
+			 int timeout_ms, gfp_t gfp_mask,
+			 void (*callback)(int status,
+					  struct ib_sa_service_rec *resp,
+					  void *context),
+			 void *context,
+			 struct ib_sa_query **sa_query);
+
+struct ib_sa_multicast {
+	struct ib_sa_mcmember_rec rec;
+	ib_sa_comp_mask		comp_mask;
+	int			(*callback)(int status,
+					    struct ib_sa_multicast *multicast);
+	void			*context;
+};
+
+/**
+ * ib_sa_join_multicast - Initiates a join request to the specified multicast
+ *   group.
+ * @client: SA client
+ * @device: Device associated with the multicast group.
+ * @port_num: Port on the specified device to associate with the multicast
+ *   group.
+ * @rec: SA multicast member record specifying group attributes.
+ * @comp_mask: Component mask indicating which group attributes of %rec are
+ *   valid.
+ * @gfp_mask: GFP mask for memory allocations.
+ * @callback: User callback invoked once the join operation completes.
+ * @context: User specified context stored with the ib_sa_multicast structure.
+ *
+ * This call initiates a multicast join request with the SA for the specified
+ * multicast group.  If the join operation is started successfully, it returns
+ * an ib_sa_multicast structure that is used to track the multicast operation.
+ * Users must free this structure by calling ib_free_multicast, even if the
+ * join operation later fails.  (The callback status is non-zero.)
+ *
+ * If the join operation fails; status will be non-zero, with the following
+ * failures possible:
+ * -ETIMEDOUT: The request timed out.
+ * -EIO: An error occurred sending the query.
+ * -EINVAL: The MCMemberRecord values differed from the existing group's.
+ * -ENETRESET: Indicates that an fatal error has occurred on the multicast
+ *   group, and the user must rejoin the group to continue using it.
+ */
+struct ib_sa_multicast *ib_sa_join_multicast(struct ib_sa_client *client,
+					     struct ib_device *device, u8 port_num,
+					     struct ib_sa_mcmember_rec *rec,
+					     ib_sa_comp_mask comp_mask, gfp_t gfp_mask,
+					     int (*callback)(int status,
+							     struct ib_sa_multicast
+								    *multicast),
+					     void *context);
+
+/**
+ * ib_free_multicast - Frees the multicast tracking structure, and releases
+ *    any reference on the multicast group.
+ * @multicast: Multicast tracking structure allocated by ib_join_multicast.
+ *
+ * This call blocks until the multicast identifier is destroyed.  It may
+ * not be called from within the multicast callback; however, returning a non-
+ * zero value from the callback will result in destroying the multicast
+ * tracking structure.
+ */
+void ib_sa_free_multicast(struct ib_sa_multicast *multicast);
+
+/**
+ * ib_get_mcmember_rec - Looks up a multicast member record by its MGID and
+ *   returns it if found.
+ * @device: Device associated with the multicast group.
+ * @port_num: Port on the specified device to associate with the multicast
+ *   group.
+ * @mgid: MGID of multicast group.
+ * @rec: Location to copy SA multicast member record.
+ */
+int ib_sa_get_mcmember_rec(struct ib_device *device, u8 port_num,
+			   union ib_gid *mgid, struct ib_sa_mcmember_rec *rec);
+
+/**
+ * ib_init_ah_from_mcmember - Initialize address handle attributes based on
+ * an SA multicast member record.
+ */
+int ib_init_ah_from_mcmember(struct ib_device *device, u8 port_num,
+			     struct ib_sa_mcmember_rec *rec,
+			     struct ib_ah_attr *ah_attr);
+
+/**
+ * ib_init_ah_from_path - Initialize address handle attributes based on an SA
+ *   path record.
+ */
+int ib_init_ah_from_path(struct ib_device *device, u8 port_num,
+			 struct ib_sa_path_rec *rec,
+			 struct ib_ah_attr *ah_attr);
+
+/**
+ * ib_sa_unpack_path - Convert a path record from MAD format to struct
+ * ib_sa_path_rec.
+ */
+void ib_sa_unpack_path(void *attribute, struct ib_sa_path_rec *rec);
+
+#endif /* IB_SA_H */
diff --git a/include/rdma/ib_smi.h b/include/rdma/ib_smi.h
new file mode 100644
index 00000000..98b9086d
--- /dev/null
+++ b/include/rdma/ib_smi.h
@@ -0,0 +1,128 @@
+/*
+ * Copyright (c) 2004 Mellanox Technologies Ltd.  All rights reserved.
+ * Copyright (c) 2004 Infinicon Corporation.  All rights reserved.
+ * Copyright (c) 2004 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2004 Topspin Corporation.  All rights reserved.
+ * Copyright (c) 2004 Voltaire Corporation.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#if !defined(IB_SMI_H)
+#define IB_SMI_H
+
+#include <rdma/ib_mad.h>
+
+#define IB_SMP_DATA_SIZE			64
+#define IB_SMP_MAX_PATH_HOPS			64
+
+struct ib_smp {
+	u8	base_version;
+	u8	mgmt_class;
+	u8	class_version;
+	u8	method;
+	__be16	status;
+	u8	hop_ptr;
+	u8	hop_cnt;
+	__be64	tid;
+	__be16	attr_id;
+	__be16	resv;
+	__be32	attr_mod;
+	__be64	mkey;
+	__be16	dr_slid;
+	__be16	dr_dlid;
+	u8	reserved[28];
+	u8	data[IB_SMP_DATA_SIZE];
+	u8	initial_path[IB_SMP_MAX_PATH_HOPS];
+	u8	return_path[IB_SMP_MAX_PATH_HOPS];
+} __attribute__ ((packed));
+
+#define IB_SMP_DIRECTION			cpu_to_be16(0x8000)
+
+/* Subnet management attributes */
+#define IB_SMP_ATTR_NOTICE			cpu_to_be16(0x0002)
+#define IB_SMP_ATTR_NODE_DESC			cpu_to_be16(0x0010)
+#define IB_SMP_ATTR_NODE_INFO			cpu_to_be16(0x0011)
+#define IB_SMP_ATTR_SWITCH_INFO			cpu_to_be16(0x0012)
+#define IB_SMP_ATTR_GUID_INFO			cpu_to_be16(0x0014)
+#define IB_SMP_ATTR_PORT_INFO			cpu_to_be16(0x0015)
+#define IB_SMP_ATTR_PKEY_TABLE			cpu_to_be16(0x0016)
+#define IB_SMP_ATTR_SL_TO_VL_TABLE		cpu_to_be16(0x0017)
+#define IB_SMP_ATTR_VL_ARB_TABLE		cpu_to_be16(0x0018)
+#define IB_SMP_ATTR_LINEAR_FORWARD_TABLE	cpu_to_be16(0x0019)
+#define IB_SMP_ATTR_RANDOM_FORWARD_TABLE	cpu_to_be16(0x001A)
+#define IB_SMP_ATTR_MCAST_FORWARD_TABLE		cpu_to_be16(0x001B)
+#define IB_SMP_ATTR_SM_INFO			cpu_to_be16(0x0020)
+#define IB_SMP_ATTR_VENDOR_DIAG			cpu_to_be16(0x0030)
+#define IB_SMP_ATTR_LED_INFO			cpu_to_be16(0x0031)
+#define IB_SMP_ATTR_VENDOR_MASK			cpu_to_be16(0xFF00)
+
+struct ib_port_info {
+	__be64 mkey;
+	__be64 gid_prefix;
+	__be16 lid;
+	__be16 sm_lid;
+	__be32 cap_mask;
+	__be16 diag_code;
+	__be16 mkey_lease_period;
+	u8 local_port_num;
+	u8 link_width_enabled;
+	u8 link_width_supported;
+	u8 link_width_active;
+	u8 linkspeed_portstate;			/* 4 bits, 4 bits */
+	u8 portphysstate_linkdown;		/* 4 bits, 4 bits */
+	u8 mkeyprot_resv_lmc;			/* 2 bits, 3, 3 */
+	u8 linkspeedactive_enabled;		/* 4 bits, 4 bits */
+	u8 neighbormtu_mastersmsl;		/* 4 bits, 4 bits */
+	u8 vlcap_inittype;			/* 4 bits, 4 bits */
+	u8 vl_high_limit;
+	u8 vl_arb_high_cap;
+	u8 vl_arb_low_cap;
+	u8 inittypereply_mtucap;		/* 4 bits, 4 bits */
+	u8 vlstallcnt_hoqlife;			/* 3 bits, 5 bits */
+	u8 operationalvl_pei_peo_fpi_fpo;	/* 4 bits, 1, 1, 1, 1 */
+	__be16 mkey_violations;
+	__be16 pkey_violations;
+	__be16 qkey_violations;
+	u8 guid_cap;
+	u8 clientrereg_resv_subnetto;		/* 1 bit, 2 bits, 5 */
+	u8 resv_resptimevalue;			/* 3 bits, 5 bits */
+	u8 localphyerrors_overrunerrors;	/* 4 bits, 4 bits */
+	__be16 max_credit_hint;
+	u8 resv;
+	u8 link_roundtrip_latency[3];
+};
+
+static inline u8
+ib_get_smp_direction(struct ib_smp *smp)
+{
+	return ((smp->status & IB_SMP_DIRECTION) == IB_SMP_DIRECTION);
+}
+
+#endif /* IB_SMI_H */
diff --git a/include/rdma/ib_umem.h b/include/rdma/ib_umem.h
new file mode 100644
index 00000000..9ee0d2e5
--- /dev/null
+++ b/include/rdma/ib_umem.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (c) 2007 Cisco Systems.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef IB_UMEM_H
+#define IB_UMEM_H
+
+#include <linux/list.h>
+#include <linux/scatterlist.h>
+#include <linux/workqueue.h>
+
+struct ib_ucontext;
+
+struct ib_umem {
+	struct ib_ucontext     *context;
+	size_t			length;
+	int			offset;
+	int			page_size;
+	int                     writable;
+	int                     hugetlb;
+	struct list_head	chunk_list;
+	struct work_struct	work;
+	struct mm_struct       *mm;
+	unsigned long		diff;
+};
+
+struct ib_umem_chunk {
+	struct list_head	list;
+	int                     nents;
+	int                     nmap;
+	struct scatterlist      page_list[0];
+};
+
+#ifdef CONFIG_INFINIBAND_USER_MEM
+
+struct ib_umem *ib_umem_get(struct ib_ucontext *context, unsigned long addr,
+			    size_t size, int access, int dmasync);
+void ib_umem_release(struct ib_umem *umem);
+int ib_umem_page_count(struct ib_umem *umem);
+
+#else /* CONFIG_INFINIBAND_USER_MEM */
+
+#include <linux/err.h>
+
+static inline struct ib_umem *ib_umem_get(struct ib_ucontext *context,
+					  unsigned long addr, size_t size,
+					  int access, int dmasync) {
+	return ERR_PTR(-EINVAL);
+}
+static inline void ib_umem_release(struct ib_umem *umem) { }
+static inline int ib_umem_page_count(struct ib_umem *umem) { return 0; }
+
+#endif /* CONFIG_INFINIBAND_USER_MEM */
+
+#endif /* IB_UMEM_H */
diff --git a/include/rdma/ib_user_cm.h b/include/rdma/ib_user_cm.h
new file mode 100644
index 00000000..f79014aa
--- /dev/null
+++ b/include/rdma/ib_user_cm.h
@@ -0,0 +1,325 @@
+/*
+ * Copyright (c) 2005 Topspin Communications.  All rights reserved.
+ * Copyright (c) 2005 Intel Corporation.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef IB_USER_CM_H
+#define IB_USER_CM_H
+
+#include <linux/types.h>
+#include <rdma/ib_user_sa.h>
+
+#define IB_USER_CM_ABI_VERSION 5
+
+enum {
+	IB_USER_CM_CMD_CREATE_ID,
+	IB_USER_CM_CMD_DESTROY_ID,
+	IB_USER_CM_CMD_ATTR_ID,
+
+	IB_USER_CM_CMD_LISTEN,
+	IB_USER_CM_CMD_NOTIFY,
+
+	IB_USER_CM_CMD_SEND_REQ,
+	IB_USER_CM_CMD_SEND_REP,
+	IB_USER_CM_CMD_SEND_RTU,
+	IB_USER_CM_CMD_SEND_DREQ,
+	IB_USER_CM_CMD_SEND_DREP,
+	IB_USER_CM_CMD_SEND_REJ,
+	IB_USER_CM_CMD_SEND_MRA,
+	IB_USER_CM_CMD_SEND_LAP,
+	IB_USER_CM_CMD_SEND_APR,
+	IB_USER_CM_CMD_SEND_SIDR_REQ,
+	IB_USER_CM_CMD_SEND_SIDR_REP,
+
+	IB_USER_CM_CMD_EVENT,
+	IB_USER_CM_CMD_INIT_QP_ATTR,
+};
+/*
+ * command ABI structures.
+ */
+struct ib_ucm_cmd_hdr {
+	__u32 cmd;
+	__u16 in;
+	__u16 out;
+};
+
+struct ib_ucm_create_id {
+	__u64 uid;
+	__u64 response;
+};
+
+struct ib_ucm_create_id_resp {
+	__u32 id;
+};
+
+struct ib_ucm_destroy_id {
+	__u64 response;
+	__u32 id;
+	__u32 reserved;
+};
+
+struct ib_ucm_destroy_id_resp {
+	__u32 events_reported;
+};
+
+struct ib_ucm_attr_id {
+	__u64 response;
+	__u32 id;
+	__u32 reserved;
+};
+
+struct ib_ucm_attr_id_resp {
+	__be64 service_id;
+	__be64 service_mask;
+	__be32 local_id;
+	__be32 remote_id;
+};
+
+struct ib_ucm_init_qp_attr {
+	__u64 response;
+	__u32 id;
+	__u32 qp_state;
+};
+
+struct ib_ucm_listen {
+	__be64 service_id;
+	__be64 service_mask;
+	__u32 id;
+	__u32 reserved;
+};
+
+struct ib_ucm_notify {
+	__u32 id;
+	__u32 event;
+};
+
+struct ib_ucm_private_data {
+	__u64 data;
+	__u32 id;
+	__u8  len;
+	__u8  reserved[3];
+};
+
+struct ib_ucm_req {
+	__u32 id;
+	__u32 qpn;
+	__u32 qp_type;
+	__u32 psn;
+	__be64 sid;
+	__u64 data;
+	__u64 primary_path;
+	__u64 alternate_path;
+	__u8  len;
+	__u8  peer_to_peer;
+	__u8  responder_resources;
+	__u8  initiator_depth;
+	__u8  remote_cm_response_timeout;
+	__u8  flow_control;
+	__u8  local_cm_response_timeout;
+	__u8  retry_count;
+	__u8  rnr_retry_count;
+	__u8  max_cm_retries;
+	__u8  srq;
+	__u8  reserved[5];
+};
+
+struct ib_ucm_rep {
+	__u64 uid;
+	__u64 data;
+	__u32 id;
+	__u32 qpn;
+	__u32 psn;
+	__u8  len;
+	__u8  responder_resources;
+	__u8  initiator_depth;
+	__u8  target_ack_delay;
+	__u8  failover_accepted;
+	__u8  flow_control;
+	__u8  rnr_retry_count;
+	__u8  srq;
+	__u8  reserved[4];
+};
+
+struct ib_ucm_info {
+	__u32 id;
+	__u32 status;
+	__u64 info;
+	__u64 data;
+	__u8  info_len;
+	__u8  data_len;
+	__u8  reserved[6];
+};
+
+struct ib_ucm_mra {
+	__u64 data;
+	__u32 id;
+	__u8  len;
+	__u8  timeout;
+	__u8  reserved[2];
+};
+
+struct ib_ucm_lap {
+	__u64 path;
+	__u64 data;
+	__u32 id;
+	__u8  len;
+	__u8  reserved[3];
+};
+
+struct ib_ucm_sidr_req {
+	__u32 id;
+	__u32 timeout;
+	__be64 sid;
+	__u64 data;
+	__u64 path;
+	__u16 reserved_pkey;
+	__u8  len;
+	__u8  max_cm_retries;
+	__u8  reserved[4];
+};
+
+struct ib_ucm_sidr_rep {
+	__u32 id;
+	__u32 qpn;
+	__u32 qkey;
+	__u32 status;
+	__u64 info;
+	__u64 data;
+	__u8  info_len;
+	__u8  data_len;
+	__u8  reserved[6];
+};
+/*
+ * event notification ABI structures.
+ */
+struct ib_ucm_event_get {
+	__u64 response;
+	__u64 data;
+	__u64 info;
+	__u8  data_len;
+	__u8  info_len;
+	__u8  reserved[6];
+};
+
+struct ib_ucm_req_event_resp {
+	struct ib_user_path_rec primary_path;
+	struct ib_user_path_rec alternate_path;
+	__be64                 remote_ca_guid;
+	__u32                  remote_qkey;
+	__u32                  remote_qpn;
+	__u32                  qp_type;
+	__u32                  starting_psn;
+	__u8  responder_resources;
+	__u8  initiator_depth;
+	__u8  local_cm_response_timeout;
+	__u8  flow_control;
+	__u8  remote_cm_response_timeout;
+	__u8  retry_count;
+	__u8  rnr_retry_count;
+	__u8  srq;
+	__u8  port;
+	__u8  reserved[7];
+};
+
+struct ib_ucm_rep_event_resp {
+	__be64 remote_ca_guid;
+	__u32 remote_qkey;
+	__u32 remote_qpn;
+	__u32 starting_psn;
+	__u8  responder_resources;
+	__u8  initiator_depth;
+	__u8  target_ack_delay;
+	__u8  failover_accepted;
+	__u8  flow_control;
+	__u8  rnr_retry_count;
+	__u8  srq;
+	__u8  reserved[5];
+};
+
+struct ib_ucm_rej_event_resp {
+	__u32 reason;
+	/* ari in ib_ucm_event_get info field. */
+};
+
+struct ib_ucm_mra_event_resp {
+	__u8  timeout;
+	__u8  reserved[3];
+};
+
+struct ib_ucm_lap_event_resp {
+	struct ib_user_path_rec path;
+};
+
+struct ib_ucm_apr_event_resp {
+	__u32 status;
+	/* apr info in ib_ucm_event_get info field. */
+};
+
+struct ib_ucm_sidr_req_event_resp {
+	__u16 pkey;
+	__u8  port;
+	__u8  reserved;
+};
+
+struct ib_ucm_sidr_rep_event_resp {
+	__u32 status;
+	__u32 qkey;
+	__u32 qpn;
+	/* info in ib_ucm_event_get info field. */
+};
+
+#define IB_UCM_PRES_DATA      0x01
+#define IB_UCM_PRES_INFO      0x02
+#define IB_UCM_PRES_PRIMARY   0x04
+#define IB_UCM_PRES_ALTERNATE 0x08
+
+struct ib_ucm_event_resp {
+	__u64 uid;
+	__u32 id;
+	__u32 event;
+	__u32 present;
+	__u32 reserved;
+	union {
+		struct ib_ucm_req_event_resp req_resp;
+		struct ib_ucm_rep_event_resp rep_resp;
+		struct ib_ucm_rej_event_resp rej_resp;
+		struct ib_ucm_mra_event_resp mra_resp;
+		struct ib_ucm_lap_event_resp lap_resp;
+		struct ib_ucm_apr_event_resp apr_resp;
+
+		struct ib_ucm_sidr_req_event_resp sidr_req_resp;
+		struct ib_ucm_sidr_rep_event_resp sidr_rep_resp;
+
+		__u32                             send_status;
+	} u;
+};
+
+#endif /* IB_USER_CM_H */
diff --git a/include/rdma/ib_user_mad.h b/include/rdma/ib_user_mad.h
new file mode 100644
index 00000000..d6fce1cb
--- /dev/null
+++ b/include/rdma/ib_user_mad.h
@@ -0,0 +1,203 @@
+/*
+ * Copyright (c) 2004 Topspin Communications.  All rights reserved.
+ * Copyright (c) 2005 Voltaire, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef IB_USER_MAD_H
+#define IB_USER_MAD_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+/*
+ * Increment this value if any changes that break userspace ABI
+ * compatibility are made.
+ */
+#define IB_USER_MAD_ABI_VERSION	5
+
+/*
+ * Make sure that all structs defined in this file remain laid out so
+ * that they pack the same way on 32-bit and 64-bit architectures (to
+ * avoid incompatibility between 32-bit userspace and 64-bit kernels).
+ */
+
+/**
+ * ib_user_mad_hdr_old - Old version of MAD packet header without pkey_index
+ * @id - ID of agent MAD received with/to be sent with
+ * @status - 0 on successful receive, ETIMEDOUT if no response
+ *   received (transaction ID in data[] will be set to TID of original
+ *   request) (ignored on send)
+ * @timeout_ms - Milliseconds to wait for response (unset on receive)
+ * @retries - Number of automatic retries to attempt
+ * @qpn - Remote QP number received from/to be sent to
+ * @qkey - Remote Q_Key to be sent with (unset on receive)
+ * @lid - Remote lid received from/to be sent to
+ * @sl - Service level received with/to be sent with
+ * @path_bits - Local path bits received with/to be sent with
+ * @grh_present - If set, GRH was received/should be sent
+ * @gid_index - Local GID index to send with (unset on receive)
+ * @hop_limit - Hop limit in GRH
+ * @traffic_class - Traffic class in GRH
+ * @gid - Remote GID in GRH
+ * @flow_label - Flow label in GRH
+ */
+struct ib_user_mad_hdr_old {
+	__u32	id;
+	__u32	status;
+	__u32	timeout_ms;
+	__u32	retries;
+	__u32	length;
+	__be32	qpn;
+	__be32  qkey;
+	__be16	lid;
+	__u8	sl;
+	__u8	path_bits;
+	__u8	grh_present;
+	__u8	gid_index;
+	__u8	hop_limit;
+	__u8	traffic_class;
+	__u8	gid[16];
+	__be32	flow_label;
+};
+
+/**
+ * ib_user_mad_hdr - MAD packet header
+ *   This layout allows specifying/receiving the P_Key index.  To use
+ *   this capability, an application must call the
+ *   IB_USER_MAD_ENABLE_PKEY ioctl on the user MAD file handle before
+ *   any other actions with the file handle.
+ * @id - ID of agent MAD received with/to be sent with
+ * @status - 0 on successful receive, ETIMEDOUT if no response
+ *   received (transaction ID in data[] will be set to TID of original
+ *   request) (ignored on send)
+ * @timeout_ms - Milliseconds to wait for response (unset on receive)
+ * @retries - Number of automatic retries to attempt
+ * @qpn - Remote QP number received from/to be sent to
+ * @qkey - Remote Q_Key to be sent with (unset on receive)
+ * @lid - Remote lid received from/to be sent to
+ * @sl - Service level received with/to be sent with
+ * @path_bits - Local path bits received with/to be sent with
+ * @grh_present - If set, GRH was received/should be sent
+ * @gid_index - Local GID index to send with (unset on receive)
+ * @hop_limit - Hop limit in GRH
+ * @traffic_class - Traffic class in GRH
+ * @gid - Remote GID in GRH
+ * @flow_label - Flow label in GRH
+ * @pkey_index - P_Key index
+ */
+struct ib_user_mad_hdr {
+	__u32	id;
+	__u32	status;
+	__u32	timeout_ms;
+	__u32	retries;
+	__u32	length;
+	__be32	qpn;
+	__be32  qkey;
+	__be16	lid;
+	__u8	sl;
+	__u8	path_bits;
+	__u8	grh_present;
+	__u8	gid_index;
+	__u8	hop_limit;
+	__u8	traffic_class;
+	__u8	gid[16];
+	__be32	flow_label;
+	__u16	pkey_index;
+	__u8	reserved[6];
+};
+
+/**
+ * ib_user_mad - MAD packet
+ * @hdr - MAD packet header
+ * @data - Contents of MAD
+ *
+ */
+struct ib_user_mad {
+	struct ib_user_mad_hdr hdr;
+	__u64	data[0];
+};
+
+/*
+ * Earlier versions of this interface definition declared the
+ * method_mask[] member as an array of __u32 but treated it as a
+ * bitmap made up of longs in the kernel.  This ambiguity meant that
+ * 32-bit big-endian applications that can run on both 32-bit and
+ * 64-bit kernels had no consistent ABI to rely on, and 64-bit
+ * big-endian applications that treated method_mask as being made up
+ * of 32-bit words would have their bitmap misinterpreted.
+ *
+ * To clear up this confusion, we change the declaration of
+ * method_mask[] to use unsigned long and handle the conversion from
+ * 32-bit userspace to 64-bit kernel for big-endian systems in the
+ * compat_ioctl method.  Unfortunately, to keep the structure layout
+ * the same, we need the method_mask[] array to be aligned only to 4
+ * bytes even when long is 64 bits, which forces us into this ugly
+ * typedef.
+ */
+typedef unsigned long __attribute__((aligned(4))) packed_ulong;
+#define IB_USER_MAD_LONGS_PER_METHOD_MASK (128 / (8 * sizeof (long)))
+
+/**
+ * ib_user_mad_reg_req - MAD registration request
+ * @id - Set by the kernel; used to identify agent in future requests.
+ * @qpn - Queue pair number; must be 0 or 1.
+ * @method_mask - The caller will receive unsolicited MADs for any method
+ *   where @method_mask = 1.
+ * @mgmt_class - Indicates which management class of MADs should be receive
+ *   by the caller.  This field is only required if the user wishes to
+ *   receive unsolicited MADs, otherwise it should be 0.
+ * @mgmt_class_version - Indicates which version of MADs for the given
+ *   management class to receive.
+ * @oui: Indicates IEEE OUI when mgmt_class is a vendor class
+ *   in the range from 0x30 to 0x4f. Otherwise not used.
+ * @rmpp_version: If set, indicates the RMPP version used.
+ *
+ */
+struct ib_user_mad_reg_req {
+	__u32	id;
+	packed_ulong method_mask[IB_USER_MAD_LONGS_PER_METHOD_MASK];
+	__u8	qpn;
+	__u8	mgmt_class;
+	__u8	mgmt_class_version;
+	__u8    oui[3];
+	__u8	rmpp_version;
+};
+
+#define IB_IOCTL_MAGIC		0x1b
+
+#define IB_USER_MAD_REGISTER_AGENT	_IOWR(IB_IOCTL_MAGIC, 1, \
+					      struct ib_user_mad_reg_req)
+
+#define IB_USER_MAD_UNREGISTER_AGENT	_IOW(IB_IOCTL_MAGIC, 2, __u32)
+
+#define IB_USER_MAD_ENABLE_PKEY		_IO(IB_IOCTL_MAGIC, 3)
+
+#endif /* IB_USER_MAD_H */
diff --git a/include/rdma/ib_user_sa.h b/include/rdma/ib_user_sa.h
new file mode 100644
index 00000000..cfc7c9ba
--- /dev/null
+++ b/include/rdma/ib_user_sa.h
@@ -0,0 +1,76 @@
+/*
+ * Copyright (c) 2005 Intel Corporation.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef IB_USER_SA_H
+#define IB_USER_SA_H
+
+#include <linux/types.h>
+
+enum {
+	IB_PATH_GMP		= 1,
+	IB_PATH_PRIMARY		= (1<<1),
+	IB_PATH_ALTERNATE	= (1<<2),
+	IB_PATH_OUTBOUND	= (1<<3),
+	IB_PATH_INBOUND		= (1<<4),
+	IB_PATH_INBOUND_REVERSE = (1<<5),
+	IB_PATH_BIDIRECTIONAL	= IB_PATH_OUTBOUND | IB_PATH_INBOUND_REVERSE
+};
+
+struct ib_path_rec_data {
+	__u32	flags;
+	__u32	reserved;
+	__u32	path_rec[16];
+};
+
+struct ib_user_path_rec {
+	__u8	dgid[16];
+	__u8	sgid[16];
+	__be16	dlid;
+	__be16	slid;
+	__u32	raw_traffic;
+	__be32	flow_label;
+	__u32	reversible;
+	__u32	mtu;
+	__be16	pkey;
+	__u8	hop_limit;
+	__u8	traffic_class;
+	__u8	numb_path;
+	__u8	sl;
+	__u8	mtu_selector;
+	__u8	rate_selector;
+	__u8	rate;
+	__u8	packet_life_time_selector;
+	__u8	packet_life_time;
+	__u8	preference;
+};
+
+#endif /* IB_USER_SA_H */
diff --git a/include/rdma/ib_user_verbs.h b/include/rdma/ib_user_verbs.h
new file mode 100644
index 00000000..81aba3a7
--- /dev/null
+++ b/include/rdma/ib_user_verbs.h
@@ -0,0 +1,734 @@
+/*
+ * Copyright (c) 2005 Topspin Communications.  All rights reserved.
+ * Copyright (c) 2005, 2006 Cisco Systems.  All rights reserved.
+ * Copyright (c) 2005 PathScale, Inc.  All rights reserved.
+ * Copyright (c) 2006 Mellanox Technologies.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef IB_USER_VERBS_H
+#define IB_USER_VERBS_H
+
+#include <linux/types.h>
+
+/*
+ * Increment this value if any changes that break userspace ABI
+ * compatibility are made.
+ */
+#define IB_USER_VERBS_ABI_VERSION	6
+
+enum {
+	IB_USER_VERBS_CMD_GET_CONTEXT,
+	IB_USER_VERBS_CMD_QUERY_DEVICE,
+	IB_USER_VERBS_CMD_QUERY_PORT,
+	IB_USER_VERBS_CMD_ALLOC_PD,
+	IB_USER_VERBS_CMD_DEALLOC_PD,
+	IB_USER_VERBS_CMD_CREATE_AH,
+	IB_USER_VERBS_CMD_MODIFY_AH,
+	IB_USER_VERBS_CMD_QUERY_AH,
+	IB_USER_VERBS_CMD_DESTROY_AH,
+	IB_USER_VERBS_CMD_REG_MR,
+	IB_USER_VERBS_CMD_REG_SMR,
+	IB_USER_VERBS_CMD_REREG_MR,
+	IB_USER_VERBS_CMD_QUERY_MR,
+	IB_USER_VERBS_CMD_DEREG_MR,
+	IB_USER_VERBS_CMD_ALLOC_MW,
+	IB_USER_VERBS_CMD_BIND_MW,
+	IB_USER_VERBS_CMD_DEALLOC_MW,
+	IB_USER_VERBS_CMD_CREATE_COMP_CHANNEL,
+	IB_USER_VERBS_CMD_CREATE_CQ,
+	IB_USER_VERBS_CMD_RESIZE_CQ,
+	IB_USER_VERBS_CMD_DESTROY_CQ,
+	IB_USER_VERBS_CMD_POLL_CQ,
+	IB_USER_VERBS_CMD_PEEK_CQ,
+	IB_USER_VERBS_CMD_REQ_NOTIFY_CQ,
+	IB_USER_VERBS_CMD_CREATE_QP,
+	IB_USER_VERBS_CMD_QUERY_QP,
+	IB_USER_VERBS_CMD_MODIFY_QP,
+	IB_USER_VERBS_CMD_DESTROY_QP,
+	IB_USER_VERBS_CMD_POST_SEND,
+	IB_USER_VERBS_CMD_POST_RECV,
+	IB_USER_VERBS_CMD_ATTACH_MCAST,
+	IB_USER_VERBS_CMD_DETACH_MCAST,
+	IB_USER_VERBS_CMD_CREATE_SRQ,
+	IB_USER_VERBS_CMD_MODIFY_SRQ,
+	IB_USER_VERBS_CMD_QUERY_SRQ,
+	IB_USER_VERBS_CMD_DESTROY_SRQ,
+	IB_USER_VERBS_CMD_POST_SRQ_RECV,
+	IB_USER_VERBS_CMD_OPEN_XRCD,
+	IB_USER_VERBS_CMD_CLOSE_XRCD,
+	IB_USER_VERBS_CMD_CREATE_XSRQ,
+	IB_USER_VERBS_CMD_OPEN_QP
+};
+
+/*
+ * Make sure that all structs defined in this file remain laid out so
+ * that they pack the same way on 32-bit and 64-bit architectures (to
+ * avoid incompatibility between 32-bit userspace and 64-bit kernels).
+ * Specifically:
+ *  - Do not use pointer types -- pass pointers in __u64 instead.
+ *  - Make sure that any structure larger than 4 bytes is padded to a
+ *    multiple of 8 bytes.  Otherwise the structure size will be
+ *    different between 32-bit and 64-bit architectures.
+ */
+
+struct ib_uverbs_async_event_desc {
+	__u64 element;
+	__u32 event_type;	/* enum ib_event_type */
+	__u32 reserved;
+};
+
+struct ib_uverbs_comp_event_desc {
+	__u64 cq_handle;
+};
+
+/*
+ * All commands from userspace should start with a __u32 command field
+ * followed by __u16 in_words and out_words fields (which give the
+ * length of the command block and response buffer if any in 32-bit
+ * words).  The kernel driver will read these fields first and read
+ * the rest of the command struct based on these value.
+ */
+
+struct ib_uverbs_cmd_hdr {
+	__u32 command;
+	__u16 in_words;
+	__u16 out_words;
+};
+
+struct ib_uverbs_get_context {
+	__u64 response;
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_get_context_resp {
+	__u32 async_fd;
+	__u32 num_comp_vectors;
+};
+
+struct ib_uverbs_query_device {
+	__u64 response;
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_query_device_resp {
+	__u64 fw_ver;
+	__be64 node_guid;
+	__be64 sys_image_guid;
+	__u64 max_mr_size;
+	__u64 page_size_cap;
+	__u32 vendor_id;
+	__u32 vendor_part_id;
+	__u32 hw_ver;
+	__u32 max_qp;
+	__u32 max_qp_wr;
+	__u32 device_cap_flags;
+	__u32 max_sge;
+	__u32 max_sge_rd;
+	__u32 max_cq;
+	__u32 max_cqe;
+	__u32 max_mr;
+	__u32 max_pd;
+	__u32 max_qp_rd_atom;
+	__u32 max_ee_rd_atom;
+	__u32 max_res_rd_atom;
+	__u32 max_qp_init_rd_atom;
+	__u32 max_ee_init_rd_atom;
+	__u32 atomic_cap;
+	__u32 max_ee;
+	__u32 max_rdd;
+	__u32 max_mw;
+	__u32 max_raw_ipv6_qp;
+	__u32 max_raw_ethy_qp;
+	__u32 max_mcast_grp;
+	__u32 max_mcast_qp_attach;
+	__u32 max_total_mcast_qp_attach;
+	__u32 max_ah;
+	__u32 max_fmr;
+	__u32 max_map_per_fmr;
+	__u32 max_srq;
+	__u32 max_srq_wr;
+	__u32 max_srq_sge;
+	__u16 max_pkeys;
+	__u8  local_ca_ack_delay;
+	__u8  phys_port_cnt;
+	__u8  reserved[4];
+};
+
+struct ib_uverbs_query_port {
+	__u64 response;
+	__u8  port_num;
+	__u8  reserved[7];
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_query_port_resp {
+	__u32 port_cap_flags;
+	__u32 max_msg_sz;
+	__u32 bad_pkey_cntr;
+	__u32 qkey_viol_cntr;
+	__u32 gid_tbl_len;
+	__u16 pkey_tbl_len;
+	__u16 lid;
+	__u16 sm_lid;
+	__u8  state;
+	__u8  max_mtu;
+	__u8  active_mtu;
+	__u8  lmc;
+	__u8  max_vl_num;
+	__u8  sm_sl;
+	__u8  subnet_timeout;
+	__u8  init_type_reply;
+	__u8  active_width;
+	__u8  active_speed;
+	__u8  phys_state;
+	__u8  link_layer;
+	__u8  reserved[2];
+};
+
+struct ib_uverbs_alloc_pd {
+	__u64 response;
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_alloc_pd_resp {
+	__u32 pd_handle;
+};
+
+struct ib_uverbs_dealloc_pd {
+	__u32 pd_handle;
+};
+
+struct ib_uverbs_open_xrcd {
+	__u64 response;
+	__u32 fd;
+	__u32 oflags;
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_open_xrcd_resp {
+	__u32 xrcd_handle;
+};
+
+struct ib_uverbs_close_xrcd {
+	__u32 xrcd_handle;
+};
+
+struct ib_uverbs_reg_mr {
+	__u64 response;
+	__u64 start;
+	__u64 length;
+	__u64 hca_va;
+	__u32 pd_handle;
+	__u32 access_flags;
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_reg_mr_resp {
+	__u32 mr_handle;
+	__u32 lkey;
+	__u32 rkey;
+};
+
+struct ib_uverbs_dereg_mr {
+	__u32 mr_handle;
+};
+
+struct ib_uverbs_create_comp_channel {
+	__u64 response;
+};
+
+struct ib_uverbs_create_comp_channel_resp {
+	__u32 fd;
+};
+
+struct ib_uverbs_create_cq {
+	__u64 response;
+	__u64 user_handle;
+	__u32 cqe;
+	__u32 comp_vector;
+	__s32 comp_channel;
+	__u32 reserved;
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_create_cq_resp {
+	__u32 cq_handle;
+	__u32 cqe;
+};
+
+struct ib_uverbs_resize_cq {
+	__u64 response;
+	__u32 cq_handle;
+	__u32 cqe;
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_resize_cq_resp {
+	__u32 cqe;
+	__u32 reserved;
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_poll_cq {
+	__u64 response;
+	__u32 cq_handle;
+	__u32 ne;
+};
+
+struct ib_uverbs_wc {
+	__u64 wr_id;
+	__u32 status;
+	__u32 opcode;
+	__u32 vendor_err;
+	__u32 byte_len;
+	union {
+		__u32 imm_data;
+		__u32 invalidate_rkey;
+	} ex;
+	__u32 qp_num;
+	__u32 src_qp;
+	__u32 wc_flags;
+	__u16 pkey_index;
+	__u16 slid;
+	__u8 sl;
+	__u8 dlid_path_bits;
+	__u8 port_num;
+	__u8 reserved;
+};
+
+struct ib_uverbs_poll_cq_resp {
+	__u32 count;
+	__u32 reserved;
+	struct ib_uverbs_wc wc[0];
+};
+
+struct ib_uverbs_req_notify_cq {
+	__u32 cq_handle;
+	__u32 solicited_only;
+};
+
+struct ib_uverbs_destroy_cq {
+	__u64 response;
+	__u32 cq_handle;
+	__u32 reserved;
+};
+
+struct ib_uverbs_destroy_cq_resp {
+	__u32 comp_events_reported;
+	__u32 async_events_reported;
+};
+
+struct ib_uverbs_global_route {
+	__u8  dgid[16];
+	__u32 flow_label;
+	__u8  sgid_index;
+	__u8  hop_limit;
+	__u8  traffic_class;
+	__u8  reserved;
+};
+
+struct ib_uverbs_ah_attr {
+	struct ib_uverbs_global_route grh;
+	__u16 dlid;
+	__u8  sl;
+	__u8  src_path_bits;
+	__u8  static_rate;
+	__u8  is_global;
+	__u8  port_num;
+	__u8  reserved;
+};
+
+struct ib_uverbs_qp_attr {
+	__u32	qp_attr_mask;
+	__u32	qp_state;
+	__u32	cur_qp_state;
+	__u32	path_mtu;
+	__u32	path_mig_state;
+	__u32	qkey;
+	__u32	rq_psn;
+	__u32	sq_psn;
+	__u32	dest_qp_num;
+	__u32	qp_access_flags;
+
+	struct ib_uverbs_ah_attr ah_attr;
+	struct ib_uverbs_ah_attr alt_ah_attr;
+
+	/* ib_qp_cap */
+	__u32	max_send_wr;
+	__u32	max_recv_wr;
+	__u32	max_send_sge;
+	__u32	max_recv_sge;
+	__u32	max_inline_data;
+
+	__u16	pkey_index;
+	__u16	alt_pkey_index;
+	__u8	en_sqd_async_notify;
+	__u8	sq_draining;
+	__u8	max_rd_atomic;
+	__u8	max_dest_rd_atomic;
+	__u8	min_rnr_timer;
+	__u8	port_num;
+	__u8	timeout;
+	__u8	retry_cnt;
+	__u8	rnr_retry;
+	__u8	alt_port_num;
+	__u8	alt_timeout;
+	__u8	reserved[5];
+};
+
+struct ib_uverbs_create_qp {
+	__u64 response;
+	__u64 user_handle;
+	__u32 pd_handle;
+	__u32 send_cq_handle;
+	__u32 recv_cq_handle;
+	__u32 srq_handle;
+	__u32 max_send_wr;
+	__u32 max_recv_wr;
+	__u32 max_send_sge;
+	__u32 max_recv_sge;
+	__u32 max_inline_data;
+	__u8  sq_sig_all;
+	__u8  qp_type;
+	__u8  is_srq;
+	__u8  reserved;
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_open_qp {
+	__u64 response;
+	__u64 user_handle;
+	__u32 pd_handle;
+	__u32 qpn;
+	__u8  qp_type;
+	__u8  reserved[7];
+	__u64 driver_data[0];
+};
+
+/* also used for open response */
+struct ib_uverbs_create_qp_resp {
+	__u32 qp_handle;
+	__u32 qpn;
+	__u32 max_send_wr;
+	__u32 max_recv_wr;
+	__u32 max_send_sge;
+	__u32 max_recv_sge;
+	__u32 max_inline_data;
+	__u32 reserved;
+};
+
+/*
+ * This struct needs to remain a multiple of 8 bytes to keep the
+ * alignment of the modify QP parameters.
+ */
+struct ib_uverbs_qp_dest {
+	__u8  dgid[16];
+	__u32 flow_label;
+	__u16 dlid;
+	__u16 reserved;
+	__u8  sgid_index;
+	__u8  hop_limit;
+	__u8  traffic_class;
+	__u8  sl;
+	__u8  src_path_bits;
+	__u8  static_rate;
+	__u8  is_global;
+	__u8  port_num;
+};
+
+struct ib_uverbs_query_qp {
+	__u64 response;
+	__u32 qp_handle;
+	__u32 attr_mask;
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_query_qp_resp {
+	struct ib_uverbs_qp_dest dest;
+	struct ib_uverbs_qp_dest alt_dest;
+	__u32 max_send_wr;
+	__u32 max_recv_wr;
+	__u32 max_send_sge;
+	__u32 max_recv_sge;
+	__u32 max_inline_data;
+	__u32 qkey;
+	__u32 rq_psn;
+	__u32 sq_psn;
+	__u32 dest_qp_num;
+	__u32 qp_access_flags;
+	__u16 pkey_index;
+	__u16 alt_pkey_index;
+	__u8  qp_state;
+	__u8  cur_qp_state;
+	__u8  path_mtu;
+	__u8  path_mig_state;
+	__u8  sq_draining;
+	__u8  max_rd_atomic;
+	__u8  max_dest_rd_atomic;
+	__u8  min_rnr_timer;
+	__u8  port_num;
+	__u8  timeout;
+	__u8  retry_cnt;
+	__u8  rnr_retry;
+	__u8  alt_port_num;
+	__u8  alt_timeout;
+	__u8  sq_sig_all;
+	__u8  reserved[5];
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_modify_qp {
+	struct ib_uverbs_qp_dest dest;
+	struct ib_uverbs_qp_dest alt_dest;
+	__u32 qp_handle;
+	__u32 attr_mask;
+	__u32 qkey;
+	__u32 rq_psn;
+	__u32 sq_psn;
+	__u32 dest_qp_num;
+	__u32 qp_access_flags;
+	__u16 pkey_index;
+	__u16 alt_pkey_index;
+	__u8  qp_state;
+	__u8  cur_qp_state;
+	__u8  path_mtu;
+	__u8  path_mig_state;
+	__u8  en_sqd_async_notify;
+	__u8  max_rd_atomic;
+	__u8  max_dest_rd_atomic;
+	__u8  min_rnr_timer;
+	__u8  port_num;
+	__u8  timeout;
+	__u8  retry_cnt;
+	__u8  rnr_retry;
+	__u8  alt_port_num;
+	__u8  alt_timeout;
+	__u8  reserved[2];
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_modify_qp_resp {
+};
+
+struct ib_uverbs_destroy_qp {
+	__u64 response;
+	__u32 qp_handle;
+	__u32 reserved;
+};
+
+struct ib_uverbs_destroy_qp_resp {
+	__u32 events_reported;
+};
+
+/*
+ * The ib_uverbs_sge structure isn't used anywhere, since we assume
+ * the ib_sge structure is packed the same way on 32-bit and 64-bit
+ * architectures in both kernel and user space.  It's just here to
+ * document the ABI.
+ */
+struct ib_uverbs_sge {
+	__u64 addr;
+	__u32 length;
+	__u32 lkey;
+};
+
+struct ib_uverbs_send_wr {
+	__u64 wr_id;
+	__u32 num_sge;
+	__u32 opcode;
+	__u32 send_flags;
+	union {
+		__u32 imm_data;
+		__u32 invalidate_rkey;
+	} ex;
+	union {
+		struct {
+			__u64 remote_addr;
+			__u32 rkey;
+			__u32 reserved;
+		} rdma;
+		struct {
+			__u64 remote_addr;
+			__u64 compare_add;
+			__u64 swap;
+			__u32 rkey;
+			__u32 reserved;
+		} atomic;
+		struct {
+			__u32 ah;
+			__u32 remote_qpn;
+			__u32 remote_qkey;
+			__u32 reserved;
+		} ud;
+	} wr;
+};
+
+struct ib_uverbs_post_send {
+	__u64 response;
+	__u32 qp_handle;
+	__u32 wr_count;
+	__u32 sge_count;
+	__u32 wqe_size;
+	struct ib_uverbs_send_wr send_wr[0];
+};
+
+struct ib_uverbs_post_send_resp {
+	__u32 bad_wr;
+};
+
+struct ib_uverbs_recv_wr {
+	__u64 wr_id;
+	__u32 num_sge;
+	__u32 reserved;
+};
+
+struct ib_uverbs_post_recv {
+	__u64 response;
+	__u32 qp_handle;
+	__u32 wr_count;
+	__u32 sge_count;
+	__u32 wqe_size;
+	struct ib_uverbs_recv_wr recv_wr[0];
+};
+
+struct ib_uverbs_post_recv_resp {
+	__u32 bad_wr;
+};
+
+struct ib_uverbs_post_srq_recv {
+	__u64 response;
+	__u32 srq_handle;
+	__u32 wr_count;
+	__u32 sge_count;
+	__u32 wqe_size;
+	struct ib_uverbs_recv_wr recv[0];
+};
+
+struct ib_uverbs_post_srq_recv_resp {
+	__u32 bad_wr;
+};
+
+struct ib_uverbs_create_ah {
+	__u64 response;
+	__u64 user_handle;
+	__u32 pd_handle;
+	__u32 reserved;
+	struct ib_uverbs_ah_attr attr;
+};
+
+struct ib_uverbs_create_ah_resp {
+	__u32 ah_handle;
+};
+
+struct ib_uverbs_destroy_ah {
+	__u32 ah_handle;
+};
+
+struct ib_uverbs_attach_mcast {
+	__u8  gid[16];
+	__u32 qp_handle;
+	__u16 mlid;
+	__u16 reserved;
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_detach_mcast {
+	__u8  gid[16];
+	__u32 qp_handle;
+	__u16 mlid;
+	__u16 reserved;
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_create_srq {
+	__u64 response;
+	__u64 user_handle;
+	__u32 pd_handle;
+	__u32 max_wr;
+	__u32 max_sge;
+	__u32 srq_limit;
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_create_xsrq {
+	__u64 response;
+	__u64 user_handle;
+	__u32 srq_type;
+	__u32 pd_handle;
+	__u32 max_wr;
+	__u32 max_sge;
+	__u32 srq_limit;
+	__u32 reserved;
+	__u32 xrcd_handle;
+	__u32 cq_handle;
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_create_srq_resp {
+	__u32 srq_handle;
+	__u32 max_wr;
+	__u32 max_sge;
+	__u32 srqn;
+};
+
+struct ib_uverbs_modify_srq {
+	__u32 srq_handle;
+	__u32 attr_mask;
+	__u32 max_wr;
+	__u32 srq_limit;
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_query_srq {
+	__u64 response;
+	__u32 srq_handle;
+	__u32 reserved;
+	__u64 driver_data[0];
+};
+
+struct ib_uverbs_query_srq_resp {
+	__u32 max_wr;
+	__u32 max_sge;
+	__u32 srq_limit;
+	__u32 reserved;
+};
+
+struct ib_uverbs_destroy_srq {
+	__u64 response;
+	__u32 srq_handle;
+	__u32 reserved;
+};
+
+struct ib_uverbs_destroy_srq_resp {
+	__u32 events_reported;
+};
+
+#endif /* IB_USER_VERBS_H */
diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
new file mode 100644
index 00000000..c3cca5a4
--- /dev/null
+++ b/include/rdma/ib_verbs.h
@@ -0,0 +1,2174 @@
+/*
+ * Copyright (c) 2004 Mellanox Technologies Ltd.  All rights reserved.
+ * Copyright (c) 2004 Infinicon Corporation.  All rights reserved.
+ * Copyright (c) 2004 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2004 Topspin Corporation.  All rights reserved.
+ * Copyright (c) 2004 Voltaire Corporation.  All rights reserved.
+ * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
+ * Copyright (c) 2005, 2006, 2007 Cisco Systems.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#if !defined(IB_VERBS_H)
+#define IB_VERBS_H
+
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/dma-mapping.h>
+#include <linux/kref.h>
+#include <linux/list.h>
+#include <linux/rwsem.h>
+#include <linux/scatterlist.h>
+#include <linux/workqueue.h>
+
+#include <linux/atomic.h>
+#include <asm/uaccess.h>
+
+extern struct workqueue_struct *ib_wq;
+
+union ib_gid {
+	u8	raw[16];
+	struct {
+		__be64	subnet_prefix;
+		__be64	interface_id;
+	} global;
+};
+
+enum rdma_node_type {
+	/* IB values map to NodeInfo:NodeType. */
+	RDMA_NODE_IB_CA 	= 1,
+	RDMA_NODE_IB_SWITCH,
+	RDMA_NODE_IB_ROUTER,
+	RDMA_NODE_RNIC
+};
+
+enum rdma_transport_type {
+	RDMA_TRANSPORT_IB,
+	RDMA_TRANSPORT_IWARP
+};
+
+enum rdma_transport_type
+rdma_node_get_transport(enum rdma_node_type node_type) __attribute_const__;
+
+enum rdma_link_layer {
+	IB_LINK_LAYER_UNSPECIFIED,
+	IB_LINK_LAYER_INFINIBAND,
+	IB_LINK_LAYER_ETHERNET,
+};
+
+enum ib_device_cap_flags {
+	IB_DEVICE_RESIZE_MAX_WR		= 1,
+	IB_DEVICE_BAD_PKEY_CNTR		= (1<<1),
+	IB_DEVICE_BAD_QKEY_CNTR		= (1<<2),
+	IB_DEVICE_RAW_MULTI		= (1<<3),
+	IB_DEVICE_AUTO_PATH_MIG		= (1<<4),
+	IB_DEVICE_CHANGE_PHY_PORT	= (1<<5),
+	IB_DEVICE_UD_AV_PORT_ENFORCE	= (1<<6),
+	IB_DEVICE_CURR_QP_STATE_MOD	= (1<<7),
+	IB_DEVICE_SHUTDOWN_PORT		= (1<<8),
+	IB_DEVICE_INIT_TYPE		= (1<<9),
+	IB_DEVICE_PORT_ACTIVE_EVENT	= (1<<10),
+	IB_DEVICE_SYS_IMAGE_GUID	= (1<<11),
+	IB_DEVICE_RC_RNR_NAK_GEN	= (1<<12),
+	IB_DEVICE_SRQ_RESIZE		= (1<<13),
+	IB_DEVICE_N_NOTIFY_CQ		= (1<<14),
+	IB_DEVICE_LOCAL_DMA_LKEY	= (1<<15),
+	IB_DEVICE_RESERVED		= (1<<16), /* old SEND_W_INV */
+	IB_DEVICE_MEM_WINDOW		= (1<<17),
+	/*
+	 * Devices should set IB_DEVICE_UD_IP_SUM if they support
+	 * insertion of UDP and TCP checksum on outgoing UD IPoIB
+	 * messages and can verify the validity of checksum for
+	 * incoming messages.  Setting this flag implies that the
+	 * IPoIB driver may set NETIF_F_IP_CSUM for datagram mode.
+	 */
+	IB_DEVICE_UD_IP_CSUM		= (1<<18),
+	IB_DEVICE_UD_TSO		= (1<<19),
+	IB_DEVICE_XRC			= (1<<20),
+	IB_DEVICE_MEM_MGT_EXTENSIONS	= (1<<21),
+	IB_DEVICE_BLOCK_MULTICAST_LOOPBACK = (1<<22),
+};
+
+enum ib_atomic_cap {
+	IB_ATOMIC_NONE,
+	IB_ATOMIC_HCA,
+	IB_ATOMIC_GLOB
+};
+
+struct ib_device_attr {
+	u64			fw_ver;
+	__be64			sys_image_guid;
+	u64			max_mr_size;
+	u64			page_size_cap;
+	u32			vendor_id;
+	u32			vendor_part_id;
+	u32			hw_ver;
+	int			max_qp;
+	int			max_qp_wr;
+	int			device_cap_flags;
+	int			max_sge;
+	int			max_sge_rd;
+	int			max_cq;
+	int			max_cqe;
+	int			max_mr;
+	int			max_pd;
+	int			max_qp_rd_atom;
+	int			max_ee_rd_atom;
+	int			max_res_rd_atom;
+	int			max_qp_init_rd_atom;
+	int			max_ee_init_rd_atom;
+	enum ib_atomic_cap	atomic_cap;
+	enum ib_atomic_cap	masked_atomic_cap;
+	int			max_ee;
+	int			max_rdd;
+	int			max_mw;
+	int			max_raw_ipv6_qp;
+	int			max_raw_ethy_qp;
+	int			max_mcast_grp;
+	int			max_mcast_qp_attach;
+	int			max_total_mcast_qp_attach;
+	int			max_ah;
+	int			max_fmr;
+	int			max_map_per_fmr;
+	int			max_srq;
+	int			max_srq_wr;
+	int			max_srq_sge;
+	unsigned int		max_fast_reg_page_list_len;
+	u16			max_pkeys;
+	u8			local_ca_ack_delay;
+};
+
+enum ib_mtu {
+	IB_MTU_256  = 1,
+	IB_MTU_512  = 2,
+	IB_MTU_1024 = 3,
+	IB_MTU_2048 = 4,
+	IB_MTU_4096 = 5
+};
+
+static inline int ib_mtu_enum_to_int(enum ib_mtu mtu)
+{
+	switch (mtu) {
+	case IB_MTU_256:  return  256;
+	case IB_MTU_512:  return  512;
+	case IB_MTU_1024: return 1024;
+	case IB_MTU_2048: return 2048;
+	case IB_MTU_4096: return 4096;
+	default: 	  return -1;
+	}
+}
+
+enum ib_port_state {
+	IB_PORT_NOP		= 0,
+	IB_PORT_DOWN		= 1,
+	IB_PORT_INIT		= 2,
+	IB_PORT_ARMED		= 3,
+	IB_PORT_ACTIVE		= 4,
+	IB_PORT_ACTIVE_DEFER	= 5
+};
+
+enum ib_port_cap_flags {
+	IB_PORT_SM				= 1 <<  1,
+	IB_PORT_NOTICE_SUP			= 1 <<  2,
+	IB_PORT_TRAP_SUP			= 1 <<  3,
+	IB_PORT_OPT_IPD_SUP                     = 1 <<  4,
+	IB_PORT_AUTO_MIGR_SUP			= 1 <<  5,
+	IB_PORT_SL_MAP_SUP			= 1 <<  6,
+	IB_PORT_MKEY_NVRAM			= 1 <<  7,
+	IB_PORT_PKEY_NVRAM			= 1 <<  8,
+	IB_PORT_LED_INFO_SUP			= 1 <<  9,
+	IB_PORT_SM_DISABLED			= 1 << 10,
+	IB_PORT_SYS_IMAGE_GUID_SUP		= 1 << 11,
+	IB_PORT_PKEY_SW_EXT_PORT_TRAP_SUP	= 1 << 12,
+	IB_PORT_EXTENDED_SPEEDS_SUP             = 1 << 14,
+	IB_PORT_CM_SUP				= 1 << 16,
+	IB_PORT_SNMP_TUNNEL_SUP			= 1 << 17,
+	IB_PORT_REINIT_SUP			= 1 << 18,
+	IB_PORT_DEVICE_MGMT_SUP			= 1 << 19,
+	IB_PORT_VENDOR_CLASS_SUP		= 1 << 20,
+	IB_PORT_DR_NOTICE_SUP			= 1 << 21,
+	IB_PORT_CAP_MASK_NOTICE_SUP		= 1 << 22,
+	IB_PORT_BOOT_MGMT_SUP			= 1 << 23,
+	IB_PORT_LINK_LATENCY_SUP		= 1 << 24,
+	IB_PORT_CLIENT_REG_SUP			= 1 << 25
+};
+
+enum ib_port_width {
+	IB_WIDTH_1X	= 1,
+	IB_WIDTH_4X	= 2,
+	IB_WIDTH_8X	= 4,
+	IB_WIDTH_12X	= 8
+};
+
+static inline int ib_width_enum_to_int(enum ib_port_width width)
+{
+	switch (width) {
+	case IB_WIDTH_1X:  return  1;
+	case IB_WIDTH_4X:  return  4;
+	case IB_WIDTH_8X:  return  8;
+	case IB_WIDTH_12X: return 12;
+	default: 	  return -1;
+	}
+}
+
+enum ib_port_speed {
+	IB_SPEED_SDR	= 1,
+	IB_SPEED_DDR	= 2,
+	IB_SPEED_QDR	= 4,
+	IB_SPEED_FDR10	= 8,
+	IB_SPEED_FDR	= 16,
+	IB_SPEED_EDR	= 32
+};
+
+struct ib_protocol_stats {
+	/* TBD... */
+};
+
+struct iw_protocol_stats {
+	u64	ipInReceives;
+	u64	ipInHdrErrors;
+	u64	ipInTooBigErrors;
+	u64	ipInNoRoutes;
+	u64	ipInAddrErrors;
+	u64	ipInUnknownProtos;
+	u64	ipInTruncatedPkts;
+	u64	ipInDiscards;
+	u64	ipInDelivers;
+	u64	ipOutForwDatagrams;
+	u64	ipOutRequests;
+	u64	ipOutDiscards;
+	u64	ipOutNoRoutes;
+	u64	ipReasmTimeout;
+	u64	ipReasmReqds;
+	u64	ipReasmOKs;
+	u64	ipReasmFails;
+	u64	ipFragOKs;
+	u64	ipFragFails;
+	u64	ipFragCreates;
+	u64	ipInMcastPkts;
+	u64	ipOutMcastPkts;
+	u64	ipInBcastPkts;
+	u64	ipOutBcastPkts;
+
+	u64	tcpRtoAlgorithm;
+	u64	tcpRtoMin;
+	u64	tcpRtoMax;
+	u64	tcpMaxConn;
+	u64	tcpActiveOpens;
+	u64	tcpPassiveOpens;
+	u64	tcpAttemptFails;
+	u64	tcpEstabResets;
+	u64	tcpCurrEstab;
+	u64	tcpInSegs;
+	u64	tcpOutSegs;
+	u64	tcpRetransSegs;
+	u64	tcpInErrs;
+	u64	tcpOutRsts;
+};
+
+union rdma_protocol_stats {
+	struct ib_protocol_stats	ib;
+	struct iw_protocol_stats	iw;
+};
+
+struct ib_port_attr {
+	enum ib_port_state	state;
+	enum ib_mtu		max_mtu;
+	enum ib_mtu		active_mtu;
+	int			gid_tbl_len;
+	u32			port_cap_flags;
+	u32			max_msg_sz;
+	u32			bad_pkey_cntr;
+	u32			qkey_viol_cntr;
+	u16			pkey_tbl_len;
+	u16			lid;
+	u16			sm_lid;
+	u8			lmc;
+	u8			max_vl_num;
+	u8			sm_sl;
+	u8			subnet_timeout;
+	u8			init_type_reply;
+	u8			active_width;
+	u8			active_speed;
+	u8                      phys_state;
+};
+
+enum ib_device_modify_flags {
+	IB_DEVICE_MODIFY_SYS_IMAGE_GUID	= 1 << 0,
+	IB_DEVICE_MODIFY_NODE_DESC	= 1 << 1
+};
+
+struct ib_device_modify {
+	u64	sys_image_guid;
+	char	node_desc[64];
+};
+
+enum ib_port_modify_flags {
+	IB_PORT_SHUTDOWN		= 1,
+	IB_PORT_INIT_TYPE		= (1<<2),
+	IB_PORT_RESET_QKEY_CNTR		= (1<<3)
+};
+
+struct ib_port_modify {
+	u32	set_port_cap_mask;
+	u32	clr_port_cap_mask;
+	u8	init_type;
+};
+
+enum ib_event_type {
+	IB_EVENT_CQ_ERR,
+	IB_EVENT_QP_FATAL,
+	IB_EVENT_QP_REQ_ERR,
+	IB_EVENT_QP_ACCESS_ERR,
+	IB_EVENT_COMM_EST,
+	IB_EVENT_SQ_DRAINED,
+	IB_EVENT_PATH_MIG,
+	IB_EVENT_PATH_MIG_ERR,
+	IB_EVENT_DEVICE_FATAL,
+	IB_EVENT_PORT_ACTIVE,
+	IB_EVENT_PORT_ERR,
+	IB_EVENT_LID_CHANGE,
+	IB_EVENT_PKEY_CHANGE,
+	IB_EVENT_SM_CHANGE,
+	IB_EVENT_SRQ_ERR,
+	IB_EVENT_SRQ_LIMIT_REACHED,
+	IB_EVENT_QP_LAST_WQE_REACHED,
+	IB_EVENT_CLIENT_REREGISTER,
+	IB_EVENT_GID_CHANGE,
+};
+
+struct ib_event {
+	struct ib_device	*device;
+	union {
+		struct ib_cq	*cq;
+		struct ib_qp	*qp;
+		struct ib_srq	*srq;
+		u8		port_num;
+	} element;
+	enum ib_event_type	event;
+};
+
+struct ib_event_handler {
+	struct ib_device *device;
+	void            (*handler)(struct ib_event_handler *, struct ib_event *);
+	struct list_head  list;
+};
+
+#define INIT_IB_EVENT_HANDLER(_ptr, _device, _handler)		\
+	do {							\
+		(_ptr)->device  = _device;			\
+		(_ptr)->handler = _handler;			\
+		INIT_LIST_HEAD(&(_ptr)->list);			\
+	} while (0)
+
+struct ib_global_route {
+	union ib_gid	dgid;
+	u32		flow_label;
+	u8		sgid_index;
+	u8		hop_limit;
+	u8		traffic_class;
+};
+
+struct ib_grh {
+	__be32		version_tclass_flow;
+	__be16		paylen;
+	u8		next_hdr;
+	u8		hop_limit;
+	union ib_gid	sgid;
+	union ib_gid	dgid;
+};
+
+enum {
+	IB_MULTICAST_QPN = 0xffffff
+};
+
+#define IB_LID_PERMISSIVE	cpu_to_be16(0xFFFF)
+
+enum ib_ah_flags {
+	IB_AH_GRH	= 1
+};
+
+enum ib_rate {
+	IB_RATE_PORT_CURRENT = 0,
+	IB_RATE_2_5_GBPS = 2,
+	IB_RATE_5_GBPS   = 5,
+	IB_RATE_10_GBPS  = 3,
+	IB_RATE_20_GBPS  = 6,
+	IB_RATE_30_GBPS  = 4,
+	IB_RATE_40_GBPS  = 7,
+	IB_RATE_60_GBPS  = 8,
+	IB_RATE_80_GBPS  = 9,
+	IB_RATE_120_GBPS = 10,
+	IB_RATE_14_GBPS  = 11,
+	IB_RATE_56_GBPS  = 12,
+	IB_RATE_112_GBPS = 13,
+	IB_RATE_168_GBPS = 14,
+	IB_RATE_25_GBPS  = 15,
+	IB_RATE_100_GBPS = 16,
+	IB_RATE_200_GBPS = 17,
+	IB_RATE_300_GBPS = 18
+};
+
+/**
+ * ib_rate_to_mult - Convert the IB rate enum to a multiple of the
+ * base rate of 2.5 Gbit/sec.  For example, IB_RATE_5_GBPS will be
+ * converted to 2, since 5 Gbit/sec is 2 * 2.5 Gbit/sec.
+ * @rate: rate to convert.
+ */
+int ib_rate_to_mult(enum ib_rate rate) __attribute_const__;
+
+/**
+ * ib_rate_to_mbps - Convert the IB rate enum to Mbps.
+ * For example, IB_RATE_2_5_GBPS will be converted to 2500.
+ * @rate: rate to convert.
+ */
+int ib_rate_to_mbps(enum ib_rate rate) __attribute_const__;
+
+/**
+ * mult_to_ib_rate - Convert a multiple of 2.5 Gbit/sec to an IB rate
+ * enum.
+ * @mult: multiple to convert.
+ */
+enum ib_rate mult_to_ib_rate(int mult) __attribute_const__;
+
+struct ib_ah_attr {
+	struct ib_global_route	grh;
+	u16			dlid;
+	u8			sl;
+	u8			src_path_bits;
+	u8			static_rate;
+	u8			ah_flags;
+	u8			port_num;
+};
+
+enum ib_wc_status {
+	IB_WC_SUCCESS,
+	IB_WC_LOC_LEN_ERR,
+	IB_WC_LOC_QP_OP_ERR,
+	IB_WC_LOC_EEC_OP_ERR,
+	IB_WC_LOC_PROT_ERR,
+	IB_WC_WR_FLUSH_ERR,
+	IB_WC_MW_BIND_ERR,
+	IB_WC_BAD_RESP_ERR,
+	IB_WC_LOC_ACCESS_ERR,
+	IB_WC_REM_INV_REQ_ERR,
+	IB_WC_REM_ACCESS_ERR,
+	IB_WC_REM_OP_ERR,
+	IB_WC_RETRY_EXC_ERR,
+	IB_WC_RNR_RETRY_EXC_ERR,
+	IB_WC_LOC_RDD_VIOL_ERR,
+	IB_WC_REM_INV_RD_REQ_ERR,
+	IB_WC_REM_ABORT_ERR,
+	IB_WC_INV_EECN_ERR,
+	IB_WC_INV_EEC_STATE_ERR,
+	IB_WC_FATAL_ERR,
+	IB_WC_RESP_TIMEOUT_ERR,
+	IB_WC_GENERAL_ERR
+};
+
+enum ib_wc_opcode {
+	IB_WC_SEND,
+	IB_WC_RDMA_WRITE,
+	IB_WC_RDMA_READ,
+	IB_WC_COMP_SWAP,
+	IB_WC_FETCH_ADD,
+	IB_WC_BIND_MW,
+	IB_WC_LSO,
+	IB_WC_LOCAL_INV,
+	IB_WC_FAST_REG_MR,
+	IB_WC_MASKED_COMP_SWAP,
+	IB_WC_MASKED_FETCH_ADD,
+/*
+ * Set value of IB_WC_RECV so consumers can test if a completion is a
+ * receive by testing (opcode & IB_WC_RECV).
+ */
+	IB_WC_RECV			= 1 << 7,
+	IB_WC_RECV_RDMA_WITH_IMM
+};
+
+enum ib_wc_flags {
+	IB_WC_GRH		= 1,
+	IB_WC_WITH_IMM		= (1<<1),
+	IB_WC_WITH_INVALIDATE	= (1<<2),
+	IB_WC_IP_CSUM_OK	= (1<<3),
+};
+
+struct ib_wc {
+	u64			wr_id;
+	enum ib_wc_status	status;
+	enum ib_wc_opcode	opcode;
+	u32			vendor_err;
+	u32			byte_len;
+	struct ib_qp	       *qp;
+	union {
+		__be32		imm_data;
+		u32		invalidate_rkey;
+	} ex;
+	u32			src_qp;
+	int			wc_flags;
+	u16			pkey_index;
+	u16			slid;
+	u8			sl;
+	u8			dlid_path_bits;
+	u8			port_num;	/* valid only for DR SMPs on switches */
+};
+
+enum ib_cq_notify_flags {
+	IB_CQ_SOLICITED			= 1 << 0,
+	IB_CQ_NEXT_COMP			= 1 << 1,
+	IB_CQ_SOLICITED_MASK		= IB_CQ_SOLICITED | IB_CQ_NEXT_COMP,
+	IB_CQ_REPORT_MISSED_EVENTS	= 1 << 2,
+};
+
+enum ib_srq_type {
+	IB_SRQT_BASIC,
+	IB_SRQT_XRC
+};
+
+enum ib_srq_attr_mask {
+	IB_SRQ_MAX_WR	= 1 << 0,
+	IB_SRQ_LIMIT	= 1 << 1,
+};
+
+struct ib_srq_attr {
+	u32	max_wr;
+	u32	max_sge;
+	u32	srq_limit;
+};
+
+struct ib_srq_init_attr {
+	void		      (*event_handler)(struct ib_event *, void *);
+	void		       *srq_context;
+	struct ib_srq_attr	attr;
+	enum ib_srq_type	srq_type;
+
+	union {
+		struct {
+			struct ib_xrcd *xrcd;
+			struct ib_cq   *cq;
+		} xrc;
+	} ext;
+};
+
+struct ib_qp_cap {
+	u32	max_send_wr;
+	u32	max_recv_wr;
+	u32	max_send_sge;
+	u32	max_recv_sge;
+	u32	max_inline_data;
+};
+
+enum ib_sig_type {
+	IB_SIGNAL_ALL_WR,
+	IB_SIGNAL_REQ_WR
+};
+
+enum ib_qp_type {
+	/*
+	 * IB_QPT_SMI and IB_QPT_GSI have to be the first two entries
+	 * here (and in that order) since the MAD layer uses them as
+	 * indices into a 2-entry table.
+	 */
+	IB_QPT_SMI,
+	IB_QPT_GSI,
+
+	IB_QPT_RC,
+	IB_QPT_UC,
+	IB_QPT_UD,
+	IB_QPT_RAW_IPV6,
+	IB_QPT_RAW_ETHERTYPE,
+	/* Save 8 for RAW_PACKET */
+	IB_QPT_XRC_INI = 9,
+	IB_QPT_XRC_TGT,
+	IB_QPT_MAX
+};
+
+enum ib_qp_create_flags {
+	IB_QP_CREATE_IPOIB_UD_LSO		= 1 << 0,
+	IB_QP_CREATE_BLOCK_MULTICAST_LOOPBACK	= 1 << 1,
+};
+
+struct ib_qp_init_attr {
+	void                  (*event_handler)(struct ib_event *, void *);
+	void		       *qp_context;
+	struct ib_cq	       *send_cq;
+	struct ib_cq	       *recv_cq;
+	struct ib_srq	       *srq;
+	struct ib_xrcd	       *xrcd;     /* XRC TGT QPs only */
+	struct ib_qp_cap	cap;
+	enum ib_sig_type	sq_sig_type;
+	enum ib_qp_type		qp_type;
+	enum ib_qp_create_flags	create_flags;
+	u8			port_num; /* special QP types only */
+};
+
+struct ib_qp_open_attr {
+	void                  (*event_handler)(struct ib_event *, void *);
+	void		       *qp_context;
+	u32			qp_num;
+	enum ib_qp_type		qp_type;
+};
+
+enum ib_rnr_timeout {
+	IB_RNR_TIMER_655_36 =  0,
+	IB_RNR_TIMER_000_01 =  1,
+	IB_RNR_TIMER_000_02 =  2,
+	IB_RNR_TIMER_000_03 =  3,
+	IB_RNR_TIMER_000_04 =  4,
+	IB_RNR_TIMER_000_06 =  5,
+	IB_RNR_TIMER_000_08 =  6,
+	IB_RNR_TIMER_000_12 =  7,
+	IB_RNR_TIMER_000_16 =  8,
+	IB_RNR_TIMER_000_24 =  9,
+	IB_RNR_TIMER_000_32 = 10,
+	IB_RNR_TIMER_000_48 = 11,
+	IB_RNR_TIMER_000_64 = 12,
+	IB_RNR_TIMER_000_96 = 13,
+	IB_RNR_TIMER_001_28 = 14,
+	IB_RNR_TIMER_001_92 = 15,
+	IB_RNR_TIMER_002_56 = 16,
+	IB_RNR_TIMER_003_84 = 17,
+	IB_RNR_TIMER_005_12 = 18,
+	IB_RNR_TIMER_007_68 = 19,
+	IB_RNR_TIMER_010_24 = 20,
+	IB_RNR_TIMER_015_36 = 21,
+	IB_RNR_TIMER_020_48 = 22,
+	IB_RNR_TIMER_030_72 = 23,
+	IB_RNR_TIMER_040_96 = 24,
+	IB_RNR_TIMER_061_44 = 25,
+	IB_RNR_TIMER_081_92 = 26,
+	IB_RNR_TIMER_122_88 = 27,
+	IB_RNR_TIMER_163_84 = 28,
+	IB_RNR_TIMER_245_76 = 29,
+	IB_RNR_TIMER_327_68 = 30,
+	IB_RNR_TIMER_491_52 = 31
+};
+
+enum ib_qp_attr_mask {
+	IB_QP_STATE			= 1,
+	IB_QP_CUR_STATE			= (1<<1),
+	IB_QP_EN_SQD_ASYNC_NOTIFY	= (1<<2),
+	IB_QP_ACCESS_FLAGS		= (1<<3),
+	IB_QP_PKEY_INDEX		= (1<<4),
+	IB_QP_PORT			= (1<<5),
+	IB_QP_QKEY			= (1<<6),
+	IB_QP_AV			= (1<<7),
+	IB_QP_PATH_MTU			= (1<<8),
+	IB_QP_TIMEOUT			= (1<<9),
+	IB_QP_RETRY_CNT			= (1<<10),
+	IB_QP_RNR_RETRY			= (1<<11),
+	IB_QP_RQ_PSN			= (1<<12),
+	IB_QP_MAX_QP_RD_ATOMIC		= (1<<13),
+	IB_QP_ALT_PATH			= (1<<14),
+	IB_QP_MIN_RNR_TIMER		= (1<<15),
+	IB_QP_SQ_PSN			= (1<<16),
+	IB_QP_MAX_DEST_RD_ATOMIC	= (1<<17),
+	IB_QP_PATH_MIG_STATE		= (1<<18),
+	IB_QP_CAP			= (1<<19),
+	IB_QP_DEST_QPN			= (1<<20)
+};
+
+enum ib_qp_state {
+	IB_QPS_RESET,
+	IB_QPS_INIT,
+	IB_QPS_RTR,
+	IB_QPS_RTS,
+	IB_QPS_SQD,
+	IB_QPS_SQE,
+	IB_QPS_ERR
+};
+
+enum ib_mig_state {
+	IB_MIG_MIGRATED,
+	IB_MIG_REARM,
+	IB_MIG_ARMED
+};
+
+struct ib_qp_attr {
+	enum ib_qp_state	qp_state;
+	enum ib_qp_state	cur_qp_state;
+	enum ib_mtu		path_mtu;
+	enum ib_mig_state	path_mig_state;
+	u32			qkey;
+	u32			rq_psn;
+	u32			sq_psn;
+	u32			dest_qp_num;
+	int			qp_access_flags;
+	struct ib_qp_cap	cap;
+	struct ib_ah_attr	ah_attr;
+	struct ib_ah_attr	alt_ah_attr;
+	u16			pkey_index;
+	u16			alt_pkey_index;
+	u8			en_sqd_async_notify;
+	u8			sq_draining;
+	u8			max_rd_atomic;
+	u8			max_dest_rd_atomic;
+	u8			min_rnr_timer;
+	u8			port_num;
+	u8			timeout;
+	u8			retry_cnt;
+	u8			rnr_retry;
+	u8			alt_port_num;
+	u8			alt_timeout;
+};
+
+enum ib_wr_opcode {
+	IB_WR_RDMA_WRITE,
+	IB_WR_RDMA_WRITE_WITH_IMM,
+	IB_WR_SEND,
+	IB_WR_SEND_WITH_IMM,
+	IB_WR_RDMA_READ,
+	IB_WR_ATOMIC_CMP_AND_SWP,
+	IB_WR_ATOMIC_FETCH_AND_ADD,
+	IB_WR_LSO,
+	IB_WR_SEND_WITH_INV,
+	IB_WR_RDMA_READ_WITH_INV,
+	IB_WR_LOCAL_INV,
+	IB_WR_FAST_REG_MR,
+	IB_WR_MASKED_ATOMIC_CMP_AND_SWP,
+	IB_WR_MASKED_ATOMIC_FETCH_AND_ADD,
+};
+
+enum ib_send_flags {
+	IB_SEND_FENCE		= 1,
+	IB_SEND_SIGNALED	= (1<<1),
+	IB_SEND_SOLICITED	= (1<<2),
+	IB_SEND_INLINE		= (1<<3),
+	IB_SEND_IP_CSUM		= (1<<4)
+};
+
+struct ib_sge {
+	u64	addr;
+	u32	length;
+	u32	lkey;
+};
+
+struct ib_fast_reg_page_list {
+	struct ib_device       *device;
+	u64		       *page_list;
+	unsigned int		max_page_list_len;
+};
+
+struct ib_send_wr {
+	struct ib_send_wr      *next;
+	u64			wr_id;
+	struct ib_sge	       *sg_list;
+	int			num_sge;
+	enum ib_wr_opcode	opcode;
+	int			send_flags;
+	union {
+		__be32		imm_data;
+		u32		invalidate_rkey;
+	} ex;
+	union {
+		struct {
+			u64	remote_addr;
+			u32	rkey;
+		} rdma;
+		struct {
+			u64	remote_addr;
+			u64	compare_add;
+			u64	swap;
+			u64	compare_add_mask;
+			u64	swap_mask;
+			u32	rkey;
+		} atomic;
+		struct {
+			struct ib_ah *ah;
+			void   *header;
+			int     hlen;
+			int     mss;
+			u32	remote_qpn;
+			u32	remote_qkey;
+			u16	pkey_index; /* valid for GSI only */
+			u8	port_num;   /* valid for DR SMPs on switch only */
+		} ud;
+		struct {
+			u64				iova_start;
+			struct ib_fast_reg_page_list   *page_list;
+			unsigned int			page_shift;
+			unsigned int			page_list_len;
+			u32				length;
+			int				access_flags;
+			u32				rkey;
+		} fast_reg;
+	} wr;
+	u32			xrc_remote_srq_num;	/* XRC TGT QPs only */
+};
+
+struct ib_recv_wr {
+	struct ib_recv_wr      *next;
+	u64			wr_id;
+	struct ib_sge	       *sg_list;
+	int			num_sge;
+};
+
+enum ib_access_flags {
+	IB_ACCESS_LOCAL_WRITE	= 1,
+	IB_ACCESS_REMOTE_WRITE	= (1<<1),
+	IB_ACCESS_REMOTE_READ	= (1<<2),
+	IB_ACCESS_REMOTE_ATOMIC	= (1<<3),
+	IB_ACCESS_MW_BIND	= (1<<4)
+};
+
+struct ib_phys_buf {
+	u64      addr;
+	u64      size;
+};
+
+struct ib_mr_attr {
+	struct ib_pd	*pd;
+	u64		device_virt_addr;
+	u64		size;
+	int		mr_access_flags;
+	u32		lkey;
+	u32		rkey;
+};
+
+enum ib_mr_rereg_flags {
+	IB_MR_REREG_TRANS	= 1,
+	IB_MR_REREG_PD		= (1<<1),
+	IB_MR_REREG_ACCESS	= (1<<2)
+};
+
+struct ib_mw_bind {
+	struct ib_mr   *mr;
+	u64		wr_id;
+	u64		addr;
+	u32		length;
+	int		send_flags;
+	int		mw_access_flags;
+};
+
+struct ib_fmr_attr {
+	int	max_pages;
+	int	max_maps;
+	u8	page_shift;
+};
+
+struct ib_ucontext {
+	struct ib_device       *device;
+	struct list_head	pd_list;
+	struct list_head	mr_list;
+	struct list_head	mw_list;
+	struct list_head	cq_list;
+	struct list_head	qp_list;
+	struct list_head	srq_list;
+	struct list_head	ah_list;
+	struct list_head	xrcd_list;
+	int			closing;
+};
+
+struct ib_uobject {
+	u64			user_handle;	/* handle given to us by userspace */
+	struct ib_ucontext     *context;	/* associated user context */
+	void		       *object;		/* containing object */
+	struct list_head	list;		/* link to context's list */
+	int			id;		/* index into kernel idr */
+	struct kref		ref;
+	struct rw_semaphore	mutex;		/* protects .live */
+	int			live;
+};
+
+struct ib_udata {
+	void __user *inbuf;
+	void __user *outbuf;
+	size_t       inlen;
+	size_t       outlen;
+};
+
+struct ib_pd {
+	struct ib_device       *device;
+	struct ib_uobject      *uobject;
+	atomic_t          	usecnt; /* count all resources */
+};
+
+struct ib_xrcd {
+	struct ib_device       *device;
+	atomic_t		usecnt; /* count all exposed resources */
+	struct inode	       *inode;
+
+	struct mutex		tgt_qp_mutex;
+	struct list_head	tgt_qp_list;
+};
+
+struct ib_ah {
+	struct ib_device	*device;
+	struct ib_pd		*pd;
+	struct ib_uobject	*uobject;
+};
+
+typedef void (*ib_comp_handler)(struct ib_cq *cq, void *cq_context);
+
+struct ib_cq {
+	struct ib_device       *device;
+	struct ib_uobject      *uobject;
+	ib_comp_handler   	comp_handler;
+	void                  (*event_handler)(struct ib_event *, void *);
+	void                   *cq_context;
+	int               	cqe;
+	atomic_t          	usecnt; /* count number of work queues */
+};
+
+struct ib_srq {
+	struct ib_device       *device;
+	struct ib_pd	       *pd;
+	struct ib_uobject      *uobject;
+	void		      (*event_handler)(struct ib_event *, void *);
+	void		       *srq_context;
+	enum ib_srq_type	srq_type;
+	atomic_t		usecnt;
+
+	union {
+		struct {
+			struct ib_xrcd *xrcd;
+			struct ib_cq   *cq;
+			u32		srq_num;
+		} xrc;
+	} ext;
+};
+
+struct ib_qp {
+	struct ib_device       *device;
+	struct ib_pd	       *pd;
+	struct ib_cq	       *send_cq;
+	struct ib_cq	       *recv_cq;
+	struct ib_srq	       *srq;
+	struct ib_xrcd	       *xrcd; /* XRC TGT QPs only */
+	struct list_head	xrcd_list;
+	atomic_t		usecnt; /* count times opened */
+	struct list_head	open_list;
+	struct ib_qp           *real_qp;
+	struct ib_uobject      *uobject;
+	void                  (*event_handler)(struct ib_event *, void *);
+	void		       *qp_context;
+	u32			qp_num;
+	enum ib_qp_type		qp_type;
+};
+
+struct ib_mr {
+	struct ib_device  *device;
+	struct ib_pd	  *pd;
+	struct ib_uobject *uobject;
+	u32		   lkey;
+	u32		   rkey;
+	atomic_t	   usecnt; /* count number of MWs */
+};
+
+struct ib_mw {
+	struct ib_device	*device;
+	struct ib_pd		*pd;
+	struct ib_uobject	*uobject;
+	u32			rkey;
+};
+
+struct ib_fmr {
+	struct ib_device	*device;
+	struct ib_pd		*pd;
+	struct list_head	list;
+	u32			lkey;
+	u32			rkey;
+};
+
+struct ib_mad;
+struct ib_grh;
+
+enum ib_process_mad_flags {
+	IB_MAD_IGNORE_MKEY	= 1,
+	IB_MAD_IGNORE_BKEY	= 2,
+	IB_MAD_IGNORE_ALL	= IB_MAD_IGNORE_MKEY | IB_MAD_IGNORE_BKEY
+};
+
+enum ib_mad_result {
+	IB_MAD_RESULT_FAILURE  = 0,      /* (!SUCCESS is the important flag) */
+	IB_MAD_RESULT_SUCCESS  = 1 << 0, /* MAD was successfully processed   */
+	IB_MAD_RESULT_REPLY    = 1 << 1, /* Reply packet needs to be sent    */
+	IB_MAD_RESULT_CONSUMED = 1 << 2  /* Packet consumed: stop processing */
+};
+
+#define IB_DEVICE_NAME_MAX 64
+
+struct ib_cache {
+	rwlock_t                lock;
+	struct ib_event_handler event_handler;
+	struct ib_pkey_cache  **pkey_cache;
+	struct ib_gid_cache   **gid_cache;
+	u8                     *lmc_cache;
+};
+
+struct ib_dma_mapping_ops {
+	int		(*mapping_error)(struct ib_device *dev,
+					 u64 dma_addr);
+	u64		(*map_single)(struct ib_device *dev,
+				      void *ptr, size_t size,
+				      enum dma_data_direction direction);
+	void		(*unmap_single)(struct ib_device *dev,
+					u64 addr, size_t size,
+					enum dma_data_direction direction);
+	u64		(*map_page)(struct ib_device *dev,
+				    struct page *page, unsigned long offset,
+				    size_t size,
+				    enum dma_data_direction direction);
+	void		(*unmap_page)(struct ib_device *dev,
+				      u64 addr, size_t size,
+				      enum dma_data_direction direction);
+	int		(*map_sg)(struct ib_device *dev,
+				  struct scatterlist *sg, int nents,
+				  enum dma_data_direction direction);
+	void		(*unmap_sg)(struct ib_device *dev,
+				    struct scatterlist *sg, int nents,
+				    enum dma_data_direction direction);
+	u64		(*dma_address)(struct ib_device *dev,
+				       struct scatterlist *sg);
+	unsigned int	(*dma_len)(struct ib_device *dev,
+				   struct scatterlist *sg);
+	void		(*sync_single_for_cpu)(struct ib_device *dev,
+					       u64 dma_handle,
+					       size_t size,
+					       enum dma_data_direction dir);
+	void		(*sync_single_for_device)(struct ib_device *dev,
+						  u64 dma_handle,
+						  size_t size,
+						  enum dma_data_direction dir);
+	void		*(*alloc_coherent)(struct ib_device *dev,
+					   size_t size,
+					   u64 *dma_handle,
+					   gfp_t flag);
+	void		(*free_coherent)(struct ib_device *dev,
+					 size_t size, void *cpu_addr,
+					 u64 dma_handle);
+};
+
+struct iw_cm_verbs;
+
+struct ib_device {
+	struct device                *dma_device;
+
+	char                          name[IB_DEVICE_NAME_MAX];
+
+	struct list_head              event_handler_list;
+	spinlock_t                    event_handler_lock;
+
+	spinlock_t                    client_data_lock;
+	struct list_head              core_list;
+	struct list_head              client_data_list;
+
+	struct ib_cache               cache;
+	int                          *pkey_tbl_len;
+	int                          *gid_tbl_len;
+
+	int			      num_comp_vectors;
+
+	struct iw_cm_verbs	     *iwcm;
+
+	int		           (*get_protocol_stats)(struct ib_device *device,
+							 union rdma_protocol_stats *stats);
+	int		           (*query_device)(struct ib_device *device,
+						   struct ib_device_attr *device_attr);
+	int		           (*query_port)(struct ib_device *device,
+						 u8 port_num,
+						 struct ib_port_attr *port_attr);
+	enum rdma_link_layer	   (*get_link_layer)(struct ib_device *device,
+						     u8 port_num);
+	int		           (*query_gid)(struct ib_device *device,
+						u8 port_num, int index,
+						union ib_gid *gid);
+	int		           (*query_pkey)(struct ib_device *device,
+						 u8 port_num, u16 index, u16 *pkey);
+	int		           (*modify_device)(struct ib_device *device,
+						    int device_modify_mask,
+						    struct ib_device_modify *device_modify);
+	int		           (*modify_port)(struct ib_device *device,
+						  u8 port_num, int port_modify_mask,
+						  struct ib_port_modify *port_modify);
+	struct ib_ucontext *       (*alloc_ucontext)(struct ib_device *device,
+						     struct ib_udata *udata);
+	int                        (*dealloc_ucontext)(struct ib_ucontext *context);
+	int                        (*mmap)(struct ib_ucontext *context,
+					   struct vm_area_struct *vma);
+	struct ib_pd *             (*alloc_pd)(struct ib_device *device,
+					       struct ib_ucontext *context,
+					       struct ib_udata *udata);
+	int                        (*dealloc_pd)(struct ib_pd *pd);
+	struct ib_ah *             (*create_ah)(struct ib_pd *pd,
+						struct ib_ah_attr *ah_attr);
+	int                        (*modify_ah)(struct ib_ah *ah,
+						struct ib_ah_attr *ah_attr);
+	int                        (*query_ah)(struct ib_ah *ah,
+					       struct ib_ah_attr *ah_attr);
+	int                        (*destroy_ah)(struct ib_ah *ah);
+	struct ib_srq *            (*create_srq)(struct ib_pd *pd,
+						 struct ib_srq_init_attr *srq_init_attr,
+						 struct ib_udata *udata);
+	int                        (*modify_srq)(struct ib_srq *srq,
+						 struct ib_srq_attr *srq_attr,
+						 enum ib_srq_attr_mask srq_attr_mask,
+						 struct ib_udata *udata);
+	int                        (*query_srq)(struct ib_srq *srq,
+						struct ib_srq_attr *srq_attr);
+	int                        (*destroy_srq)(struct ib_srq *srq);
+	int                        (*post_srq_recv)(struct ib_srq *srq,
+						    struct ib_recv_wr *recv_wr,
+						    struct ib_recv_wr **bad_recv_wr);
+	struct ib_qp *             (*create_qp)(struct ib_pd *pd,
+						struct ib_qp_init_attr *qp_init_attr,
+						struct ib_udata *udata);
+	int                        (*modify_qp)(struct ib_qp *qp,
+						struct ib_qp_attr *qp_attr,
+						int qp_attr_mask,
+						struct ib_udata *udata);
+	int                        (*query_qp)(struct ib_qp *qp,
+					       struct ib_qp_attr *qp_attr,
+					       int qp_attr_mask,
+					       struct ib_qp_init_attr *qp_init_attr);
+	int                        (*destroy_qp)(struct ib_qp *qp);
+	int                        (*post_send)(struct ib_qp *qp,
+						struct ib_send_wr *send_wr,
+						struct ib_send_wr **bad_send_wr);
+	int                        (*post_recv)(struct ib_qp *qp,
+						struct ib_recv_wr *recv_wr,
+						struct ib_recv_wr **bad_recv_wr);
+	struct ib_cq *             (*create_cq)(struct ib_device *device, int cqe,
+						int comp_vector,
+						struct ib_ucontext *context,
+						struct ib_udata *udata);
+	int                        (*modify_cq)(struct ib_cq *cq, u16 cq_count,
+						u16 cq_period);
+	int                        (*destroy_cq)(struct ib_cq *cq);
+	int                        (*resize_cq)(struct ib_cq *cq, int cqe,
+						struct ib_udata *udata);
+	int                        (*poll_cq)(struct ib_cq *cq, int num_entries,
+					      struct ib_wc *wc);
+	int                        (*peek_cq)(struct ib_cq *cq, int wc_cnt);
+	int                        (*req_notify_cq)(struct ib_cq *cq,
+						    enum ib_cq_notify_flags flags);
+	int                        (*req_ncomp_notif)(struct ib_cq *cq,
+						      int wc_cnt);
+	struct ib_mr *             (*get_dma_mr)(struct ib_pd *pd,
+						 int mr_access_flags);
+	struct ib_mr *             (*reg_phys_mr)(struct ib_pd *pd,
+						  struct ib_phys_buf *phys_buf_array,
+						  int num_phys_buf,
+						  int mr_access_flags,
+						  u64 *iova_start);
+	struct ib_mr *             (*reg_user_mr)(struct ib_pd *pd,
+						  u64 start, u64 length,
+						  u64 virt_addr,
+						  int mr_access_flags,
+						  struct ib_udata *udata);
+	int                        (*query_mr)(struct ib_mr *mr,
+					       struct ib_mr_attr *mr_attr);
+	int                        (*dereg_mr)(struct ib_mr *mr);
+	struct ib_mr *		   (*alloc_fast_reg_mr)(struct ib_pd *pd,
+					       int max_page_list_len);
+	struct ib_fast_reg_page_list * (*alloc_fast_reg_page_list)(struct ib_device *device,
+								   int page_list_len);
+	void			   (*free_fast_reg_page_list)(struct ib_fast_reg_page_list *page_list);
+	int                        (*rereg_phys_mr)(struct ib_mr *mr,
+						    int mr_rereg_mask,
+						    struct ib_pd *pd,
+						    struct ib_phys_buf *phys_buf_array,
+						    int num_phys_buf,
+						    int mr_access_flags,
+						    u64 *iova_start);
+	struct ib_mw *             (*alloc_mw)(struct ib_pd *pd);
+	int                        (*bind_mw)(struct ib_qp *qp,
+					      struct ib_mw *mw,
+					      struct ib_mw_bind *mw_bind);
+	int                        (*dealloc_mw)(struct ib_mw *mw);
+	struct ib_fmr *	           (*alloc_fmr)(struct ib_pd *pd,
+						int mr_access_flags,
+						struct ib_fmr_attr *fmr_attr);
+	int		           (*map_phys_fmr)(struct ib_fmr *fmr,
+						   u64 *page_list, int list_len,
+						   u64 iova);
+	int		           (*unmap_fmr)(struct list_head *fmr_list);
+	int		           (*dealloc_fmr)(struct ib_fmr *fmr);
+	int                        (*attach_mcast)(struct ib_qp *qp,
+						   union ib_gid *gid,
+						   u16 lid);
+	int                        (*detach_mcast)(struct ib_qp *qp,
+						   union ib_gid *gid,
+						   u16 lid);
+	int                        (*process_mad)(struct ib_device *device,
+						  int process_mad_flags,
+						  u8 port_num,
+						  struct ib_wc *in_wc,
+						  struct ib_grh *in_grh,
+						  struct ib_mad *in_mad,
+						  struct ib_mad *out_mad);
+	struct ib_xrcd *	   (*alloc_xrcd)(struct ib_device *device,
+						 struct ib_ucontext *ucontext,
+						 struct ib_udata *udata);
+	int			   (*dealloc_xrcd)(struct ib_xrcd *xrcd);
+
+	struct ib_dma_mapping_ops   *dma_ops;
+
+	struct module               *owner;
+	struct device                dev;
+	struct kobject               *ports_parent;
+	struct list_head             port_list;
+
+	enum {
+		IB_DEV_UNINITIALIZED,
+		IB_DEV_REGISTERED,
+		IB_DEV_UNREGISTERED
+	}                            reg_state;
+
+	int			     uverbs_abi_ver;
+	u64			     uverbs_cmd_mask;
+
+	char			     node_desc[64];
+	__be64			     node_guid;
+	u32			     local_dma_lkey;
+	u8                           node_type;
+	u8                           phys_port_cnt;
+};
+
+struct ib_client {
+	char  *name;
+	void (*add)   (struct ib_device *);
+	void (*remove)(struct ib_device *);
+
+	struct list_head list;
+};
+
+struct ib_device *ib_alloc_device(size_t size);
+void ib_dealloc_device(struct ib_device *device);
+
+int ib_register_device(struct ib_device *device,
+		       int (*port_callback)(struct ib_device *,
+					    u8, struct kobject *));
+void ib_unregister_device(struct ib_device *device);
+
+int ib_register_client   (struct ib_client *client);
+void ib_unregister_client(struct ib_client *client);
+
+void *ib_get_client_data(struct ib_device *device, struct ib_client *client);
+void  ib_set_client_data(struct ib_device *device, struct ib_client *client,
+			 void *data);
+
+static inline int ib_copy_from_udata(void *dest, struct ib_udata *udata, size_t len)
+{
+	return copy_from_user(dest, udata->inbuf, len) ? -EFAULT : 0;
+}
+
+static inline int ib_copy_to_udata(struct ib_udata *udata, void *src, size_t len)
+{
+	return copy_to_user(udata->outbuf, src, len) ? -EFAULT : 0;
+}
+
+/**
+ * ib_modify_qp_is_ok - Check that the supplied attribute mask
+ * contains all required attributes and no attributes not allowed for
+ * the given QP state transition.
+ * @cur_state: Current QP state
+ * @next_state: Next QP state
+ * @type: QP type
+ * @mask: Mask of supplied QP attributes
+ *
+ * This function is a helper function that a low-level driver's
+ * modify_qp method can use to validate the consumer's input.  It
+ * checks that cur_state and next_state are valid QP states, that a
+ * transition from cur_state to next_state is allowed by the IB spec,
+ * and that the attribute mask supplied is allowed for the transition.
+ */
+int ib_modify_qp_is_ok(enum ib_qp_state cur_state, enum ib_qp_state next_state,
+		       enum ib_qp_type type, enum ib_qp_attr_mask mask);
+
+int ib_register_event_handler  (struct ib_event_handler *event_handler);
+int ib_unregister_event_handler(struct ib_event_handler *event_handler);
+void ib_dispatch_event(struct ib_event *event);
+
+int ib_query_device(struct ib_device *device,
+		    struct ib_device_attr *device_attr);
+
+int ib_query_port(struct ib_device *device,
+		  u8 port_num, struct ib_port_attr *port_attr);
+
+enum rdma_link_layer rdma_port_get_link_layer(struct ib_device *device,
+					       u8 port_num);
+
+int ib_query_gid(struct ib_device *device,
+		 u8 port_num, int index, union ib_gid *gid);
+
+int ib_query_pkey(struct ib_device *device,
+		  u8 port_num, u16 index, u16 *pkey);
+
+int ib_modify_device(struct ib_device *device,
+		     int device_modify_mask,
+		     struct ib_device_modify *device_modify);
+
+int ib_modify_port(struct ib_device *device,
+		   u8 port_num, int port_modify_mask,
+		   struct ib_port_modify *port_modify);
+
+int ib_find_gid(struct ib_device *device, union ib_gid *gid,
+		u8 *port_num, u16 *index);
+
+int ib_find_pkey(struct ib_device *device,
+		 u8 port_num, u16 pkey, u16 *index);
+
+/**
+ * ib_alloc_pd - Allocates an unused protection domain.
+ * @device: The device on which to allocate the protection domain.
+ *
+ * A protection domain object provides an association between QPs, shared
+ * receive queues, address handles, memory regions, and memory windows.
+ */
+struct ib_pd *ib_alloc_pd(struct ib_device *device);
+
+/**
+ * ib_dealloc_pd - Deallocates a protection domain.
+ * @pd: The protection domain to deallocate.
+ */
+int ib_dealloc_pd(struct ib_pd *pd);
+
+/**
+ * ib_create_ah - Creates an address handle for the given address vector.
+ * @pd: The protection domain associated with the address handle.
+ * @ah_attr: The attributes of the address vector.
+ *
+ * The address handle is used to reference a local or global destination
+ * in all UD QP post sends.
+ */
+struct ib_ah *ib_create_ah(struct ib_pd *pd, struct ib_ah_attr *ah_attr);
+
+/**
+ * ib_init_ah_from_wc - Initializes address handle attributes from a
+ *   work completion.
+ * @device: Device on which the received message arrived.
+ * @port_num: Port on which the received message arrived.
+ * @wc: Work completion associated with the received message.
+ * @grh: References the received global route header.  This parameter is
+ *   ignored unless the work completion indicates that the GRH is valid.
+ * @ah_attr: Returned attributes that can be used when creating an address
+ *   handle for replying to the message.
+ */
+int ib_init_ah_from_wc(struct ib_device *device, u8 port_num, struct ib_wc *wc,
+		       struct ib_grh *grh, struct ib_ah_attr *ah_attr);
+
+/**
+ * ib_create_ah_from_wc - Creates an address handle associated with the
+ *   sender of the specified work completion.
+ * @pd: The protection domain associated with the address handle.
+ * @wc: Work completion information associated with a received message.
+ * @grh: References the received global route header.  This parameter is
+ *   ignored unless the work completion indicates that the GRH is valid.
+ * @port_num: The outbound port number to associate with the address.
+ *
+ * The address handle is used to reference a local or global destination
+ * in all UD QP post sends.
+ */
+struct ib_ah *ib_create_ah_from_wc(struct ib_pd *pd, struct ib_wc *wc,
+				   struct ib_grh *grh, u8 port_num);
+
+/**
+ * ib_modify_ah - Modifies the address vector associated with an address
+ *   handle.
+ * @ah: The address handle to modify.
+ * @ah_attr: The new address vector attributes to associate with the
+ *   address handle.
+ */
+int ib_modify_ah(struct ib_ah *ah, struct ib_ah_attr *ah_attr);
+
+/**
+ * ib_query_ah - Queries the address vector associated with an address
+ *   handle.
+ * @ah: The address handle to query.
+ * @ah_attr: The address vector attributes associated with the address
+ *   handle.
+ */
+int ib_query_ah(struct ib_ah *ah, struct ib_ah_attr *ah_attr);
+
+/**
+ * ib_destroy_ah - Destroys an address handle.
+ * @ah: The address handle to destroy.
+ */
+int ib_destroy_ah(struct ib_ah *ah);
+
+/**
+ * ib_create_srq - Creates a SRQ associated with the specified protection
+ *   domain.
+ * @pd: The protection domain associated with the SRQ.
+ * @srq_init_attr: A list of initial attributes required to create the
+ *   SRQ.  If SRQ creation succeeds, then the attributes are updated to
+ *   the actual capabilities of the created SRQ.
+ *
+ * srq_attr->max_wr and srq_attr->max_sge are read the determine the
+ * requested size of the SRQ, and set to the actual values allocated
+ * on return.  If ib_create_srq() succeeds, then max_wr and max_sge
+ * will always be at least as large as the requested values.
+ */
+struct ib_srq *ib_create_srq(struct ib_pd *pd,
+			     struct ib_srq_init_attr *srq_init_attr);
+
+/**
+ * ib_modify_srq - Modifies the attributes for the specified SRQ.
+ * @srq: The SRQ to modify.
+ * @srq_attr: On input, specifies the SRQ attributes to modify.  On output,
+ *   the current values of selected SRQ attributes are returned.
+ * @srq_attr_mask: A bit-mask used to specify which attributes of the SRQ
+ *   are being modified.
+ *
+ * The mask may contain IB_SRQ_MAX_WR to resize the SRQ and/or
+ * IB_SRQ_LIMIT to set the SRQ's limit and request notification when
+ * the number of receives queued drops below the limit.
+ */
+int ib_modify_srq(struct ib_srq *srq,
+		  struct ib_srq_attr *srq_attr,
+		  enum ib_srq_attr_mask srq_attr_mask);
+
+/**
+ * ib_query_srq - Returns the attribute list and current values for the
+ *   specified SRQ.
+ * @srq: The SRQ to query.
+ * @srq_attr: The attributes of the specified SRQ.
+ */
+int ib_query_srq(struct ib_srq *srq,
+		 struct ib_srq_attr *srq_attr);
+
+/**
+ * ib_destroy_srq - Destroys the specified SRQ.
+ * @srq: The SRQ to destroy.
+ */
+int ib_destroy_srq(struct ib_srq *srq);
+
+/**
+ * ib_post_srq_recv - Posts a list of work requests to the specified SRQ.
+ * @srq: The SRQ to post the work request on.
+ * @recv_wr: A list of work requests to post on the receive queue.
+ * @bad_recv_wr: On an immediate failure, this parameter will reference
+ *   the work request that failed to be posted on the QP.
+ */
+static inline int ib_post_srq_recv(struct ib_srq *srq,
+				   struct ib_recv_wr *recv_wr,
+				   struct ib_recv_wr **bad_recv_wr)
+{
+	return srq->device->post_srq_recv(srq, recv_wr, bad_recv_wr);
+}
+
+/**
+ * ib_create_qp - Creates a QP associated with the specified protection
+ *   domain.
+ * @pd: The protection domain associated with the QP.
+ * @qp_init_attr: A list of initial attributes required to create the
+ *   QP.  If QP creation succeeds, then the attributes are updated to
+ *   the actual capabilities of the created QP.
+ */
+struct ib_qp *ib_create_qp(struct ib_pd *pd,
+			   struct ib_qp_init_attr *qp_init_attr);
+
+/**
+ * ib_modify_qp - Modifies the attributes for the specified QP and then
+ *   transitions the QP to the given state.
+ * @qp: The QP to modify.
+ * @qp_attr: On input, specifies the QP attributes to modify.  On output,
+ *   the current values of selected QP attributes are returned.
+ * @qp_attr_mask: A bit-mask used to specify which attributes of the QP
+ *   are being modified.
+ */
+int ib_modify_qp(struct ib_qp *qp,
+		 struct ib_qp_attr *qp_attr,
+		 int qp_attr_mask);
+
+/**
+ * ib_query_qp - Returns the attribute list and current values for the
+ *   specified QP.
+ * @qp: The QP to query.
+ * @qp_attr: The attributes of the specified QP.
+ * @qp_attr_mask: A bit-mask used to select specific attributes to query.
+ * @qp_init_attr: Additional attributes of the selected QP.
+ *
+ * The qp_attr_mask may be used to limit the query to gathering only the
+ * selected attributes.
+ */
+int ib_query_qp(struct ib_qp *qp,
+		struct ib_qp_attr *qp_attr,
+		int qp_attr_mask,
+		struct ib_qp_init_attr *qp_init_attr);
+
+/**
+ * ib_destroy_qp - Destroys the specified QP.
+ * @qp: The QP to destroy.
+ */
+int ib_destroy_qp(struct ib_qp *qp);
+
+/**
+ * ib_open_qp - Obtain a reference to an existing sharable QP.
+ * @xrcd - XRC domain
+ * @qp_open_attr: Attributes identifying the QP to open.
+ *
+ * Returns a reference to a sharable QP.
+ */
+struct ib_qp *ib_open_qp(struct ib_xrcd *xrcd,
+			 struct ib_qp_open_attr *qp_open_attr);
+
+/**
+ * ib_close_qp - Release an external reference to a QP.
+ * @qp: The QP handle to release
+ *
+ * The opened QP handle is released by the caller.  The underlying
+ * shared QP is not destroyed until all internal references are released.
+ */
+int ib_close_qp(struct ib_qp *qp);
+
+/**
+ * ib_post_send - Posts a list of work requests to the send queue of
+ *   the specified QP.
+ * @qp: The QP to post the work request on.
+ * @send_wr: A list of work requests to post on the send queue.
+ * @bad_send_wr: On an immediate failure, this parameter will reference
+ *   the work request that failed to be posted on the QP.
+ *
+ * While IBA Vol. 1 section 11.4.1.1 specifies that if an immediate
+ * error is returned, the QP state shall not be affected,
+ * ib_post_send() will return an immediate error after queueing any
+ * earlier work requests in the list.
+ */
+static inline int ib_post_send(struct ib_qp *qp,
+			       struct ib_send_wr *send_wr,
+			       struct ib_send_wr **bad_send_wr)
+{
+	return qp->device->post_send(qp, send_wr, bad_send_wr);
+}
+
+/**
+ * ib_post_recv - Posts a list of work requests to the receive queue of
+ *   the specified QP.
+ * @qp: The QP to post the work request on.
+ * @recv_wr: A list of work requests to post on the receive queue.
+ * @bad_recv_wr: On an immediate failure, this parameter will reference
+ *   the work request that failed to be posted on the QP.
+ */
+static inline int ib_post_recv(struct ib_qp *qp,
+			       struct ib_recv_wr *recv_wr,
+			       struct ib_recv_wr **bad_recv_wr)
+{
+	return qp->device->post_recv(qp, recv_wr, bad_recv_wr);
+}
+
+/**
+ * ib_create_cq - Creates a CQ on the specified device.
+ * @device: The device on which to create the CQ.
+ * @comp_handler: A user-specified callback that is invoked when a
+ *   completion event occurs on the CQ.
+ * @event_handler: A user-specified callback that is invoked when an
+ *   asynchronous event not associated with a completion occurs on the CQ.
+ * @cq_context: Context associated with the CQ returned to the user via
+ *   the associated completion and event handlers.
+ * @cqe: The minimum size of the CQ.
+ * @comp_vector - Completion vector used to signal completion events.
+ *     Must be >= 0 and < context->num_comp_vectors.
+ *
+ * Users can examine the cq structure to determine the actual CQ size.
+ */
+struct ib_cq *ib_create_cq(struct ib_device *device,
+			   ib_comp_handler comp_handler,
+			   void (*event_handler)(struct ib_event *, void *),
+			   void *cq_context, int cqe, int comp_vector);
+
+/**
+ * ib_resize_cq - Modifies the capacity of the CQ.
+ * @cq: The CQ to resize.
+ * @cqe: The minimum size of the CQ.
+ *
+ * Users can examine the cq structure to determine the actual CQ size.
+ */
+int ib_resize_cq(struct ib_cq *cq, int cqe);
+
+/**
+ * ib_modify_cq - Modifies moderation params of the CQ
+ * @cq: The CQ to modify.
+ * @cq_count: number of CQEs that will trigger an event
+ * @cq_period: max period of time in usec before triggering an event
+ *
+ */
+int ib_modify_cq(struct ib_cq *cq, u16 cq_count, u16 cq_period);
+
+/**
+ * ib_destroy_cq - Destroys the specified CQ.
+ * @cq: The CQ to destroy.
+ */
+int ib_destroy_cq(struct ib_cq *cq);
+
+/**
+ * ib_poll_cq - poll a CQ for completion(s)
+ * @cq:the CQ being polled
+ * @num_entries:maximum number of completions to return
+ * @wc:array of at least @num_entries &struct ib_wc where completions
+ *   will be returned
+ *
+ * Poll a CQ for (possibly multiple) completions.  If the return value
+ * is < 0, an error occurred.  If the return value is >= 0, it is the
+ * number of completions returned.  If the return value is
+ * non-negative and < num_entries, then the CQ was emptied.
+ */
+static inline int ib_poll_cq(struct ib_cq *cq, int num_entries,
+			     struct ib_wc *wc)
+{
+	return cq->device->poll_cq(cq, num_entries, wc);
+}
+
+/**
+ * ib_peek_cq - Returns the number of unreaped completions currently
+ *   on the specified CQ.
+ * @cq: The CQ to peek.
+ * @wc_cnt: A minimum number of unreaped completions to check for.
+ *
+ * If the number of unreaped completions is greater than or equal to wc_cnt,
+ * this function returns wc_cnt, otherwise, it returns the actual number of
+ * unreaped completions.
+ */
+int ib_peek_cq(struct ib_cq *cq, int wc_cnt);
+
+/**
+ * ib_req_notify_cq - Request completion notification on a CQ.
+ * @cq: The CQ to generate an event for.
+ * @flags:
+ *   Must contain exactly one of %IB_CQ_SOLICITED or %IB_CQ_NEXT_COMP
+ *   to request an event on the next solicited event or next work
+ *   completion at any type, respectively. %IB_CQ_REPORT_MISSED_EVENTS
+ *   may also be |ed in to request a hint about missed events, as
+ *   described below.
+ *
+ * Return Value:
+ *    < 0 means an error occurred while requesting notification
+ *   == 0 means notification was requested successfully, and if
+ *        IB_CQ_REPORT_MISSED_EVENTS was passed in, then no events
+ *        were missed and it is safe to wait for another event.  In
+ *        this case is it guaranteed that any work completions added
+ *        to the CQ since the last CQ poll will trigger a completion
+ *        notification event.
+ *    > 0 is only returned if IB_CQ_REPORT_MISSED_EVENTS was passed
+ *        in.  It means that the consumer must poll the CQ again to
+ *        make sure it is empty to avoid missing an event because of a
+ *        race between requesting notification and an entry being
+ *        added to the CQ.  This return value means it is possible
+ *        (but not guaranteed) that a work completion has been added
+ *        to the CQ since the last poll without triggering a
+ *        completion notification event.
+ */
+static inline int ib_req_notify_cq(struct ib_cq *cq,
+				   enum ib_cq_notify_flags flags)
+{
+	return cq->device->req_notify_cq(cq, flags);
+}
+
+/**
+ * ib_req_ncomp_notif - Request completion notification when there are
+ *   at least the specified number of unreaped completions on the CQ.
+ * @cq: The CQ to generate an event for.
+ * @wc_cnt: The number of unreaped completions that should be on the
+ *   CQ before an event is generated.
+ */
+static inline int ib_req_ncomp_notif(struct ib_cq *cq, int wc_cnt)
+{
+	return cq->device->req_ncomp_notif ?
+		cq->device->req_ncomp_notif(cq, wc_cnt) :
+		-ENOSYS;
+}
+
+/**
+ * ib_get_dma_mr - Returns a memory region for system memory that is
+ *   usable for DMA.
+ * @pd: The protection domain associated with the memory region.
+ * @mr_access_flags: Specifies the memory access rights.
+ *
+ * Note that the ib_dma_*() functions defined below must be used
+ * to create/destroy addresses used with the Lkey or Rkey returned
+ * by ib_get_dma_mr().
+ */
+struct ib_mr *ib_get_dma_mr(struct ib_pd *pd, int mr_access_flags);
+
+/**
+ * ib_dma_mapping_error - check a DMA addr for error
+ * @dev: The device for which the dma_addr was created
+ * @dma_addr: The DMA address to check
+ */
+static inline int ib_dma_mapping_error(struct ib_device *dev, u64 dma_addr)
+{
+	if (dev->dma_ops)
+		return dev->dma_ops->mapping_error(dev, dma_addr);
+	return dma_mapping_error(dev->dma_device, dma_addr);
+}
+
+/**
+ * ib_dma_map_single - Map a kernel virtual address to DMA address
+ * @dev: The device for which the dma_addr is to be created
+ * @cpu_addr: The kernel virtual address
+ * @size: The size of the region in bytes
+ * @direction: The direction of the DMA
+ */
+static inline u64 ib_dma_map_single(struct ib_device *dev,
+				    void *cpu_addr, size_t size,
+				    enum dma_data_direction direction)
+{
+	if (dev->dma_ops)
+		return dev->dma_ops->map_single(dev, cpu_addr, size, direction);
+	return dma_map_single(dev->dma_device, cpu_addr, size, direction);
+}
+
+/**
+ * ib_dma_unmap_single - Destroy a mapping created by ib_dma_map_single()
+ * @dev: The device for which the DMA address was created
+ * @addr: The DMA address
+ * @size: The size of the region in bytes
+ * @direction: The direction of the DMA
+ */
+static inline void ib_dma_unmap_single(struct ib_device *dev,
+				       u64 addr, size_t size,
+				       enum dma_data_direction direction)
+{
+	if (dev->dma_ops)
+		dev->dma_ops->unmap_single(dev, addr, size, direction);
+	else
+		dma_unmap_single(dev->dma_device, addr, size, direction);
+}
+
+static inline u64 ib_dma_map_single_attrs(struct ib_device *dev,
+					  void *cpu_addr, size_t size,
+					  enum dma_data_direction direction,
+					  struct dma_attrs *attrs)
+{
+	return dma_map_single_attrs(dev->dma_device, cpu_addr, size,
+				    direction, attrs);
+}
+
+static inline void ib_dma_unmap_single_attrs(struct ib_device *dev,
+					     u64 addr, size_t size,
+					     enum dma_data_direction direction,
+					     struct dma_attrs *attrs)
+{
+	return dma_unmap_single_attrs(dev->dma_device, addr, size,
+				      direction, attrs);
+}
+
+/**
+ * ib_dma_map_page - Map a physical page to DMA address
+ * @dev: The device for which the dma_addr is to be created
+ * @page: The page to be mapped
+ * @offset: The offset within the page
+ * @size: The size of the region in bytes
+ * @direction: The direction of the DMA
+ */
+static inline u64 ib_dma_map_page(struct ib_device *dev,
+				  struct page *page,
+				  unsigned long offset,
+				  size_t size,
+					 enum dma_data_direction direction)
+{
+	if (dev->dma_ops)
+		return dev->dma_ops->map_page(dev, page, offset, size, direction);
+	return dma_map_page(dev->dma_device, page, offset, size, direction);
+}
+
+/**
+ * ib_dma_unmap_page - Destroy a mapping created by ib_dma_map_page()
+ * @dev: The device for which the DMA address was created
+ * @addr: The DMA address
+ * @size: The size of the region in bytes
+ * @direction: The direction of the DMA
+ */
+static inline void ib_dma_unmap_page(struct ib_device *dev,
+				     u64 addr, size_t size,
+				     enum dma_data_direction direction)
+{
+	if (dev->dma_ops)
+		dev->dma_ops->unmap_page(dev, addr, size, direction);
+	else
+		dma_unmap_page(dev->dma_device, addr, size, direction);
+}
+
+/**
+ * ib_dma_map_sg - Map a scatter/gather list to DMA addresses
+ * @dev: The device for which the DMA addresses are to be created
+ * @sg: The array of scatter/gather entries
+ * @nents: The number of scatter/gather entries
+ * @direction: The direction of the DMA
+ */
+static inline int ib_dma_map_sg(struct ib_device *dev,
+				struct scatterlist *sg, int nents,
+				enum dma_data_direction direction)
+{
+	if (dev->dma_ops)
+		return dev->dma_ops->map_sg(dev, sg, nents, direction);
+	return dma_map_sg(dev->dma_device, sg, nents, direction);
+}
+
+/**
+ * ib_dma_unmap_sg - Unmap a scatter/gather list of DMA addresses
+ * @dev: The device for which the DMA addresses were created
+ * @sg: The array of scatter/gather entries
+ * @nents: The number of scatter/gather entries
+ * @direction: The direction of the DMA
+ */
+static inline void ib_dma_unmap_sg(struct ib_device *dev,
+				   struct scatterlist *sg, int nents,
+				   enum dma_data_direction direction)
+{
+	if (dev->dma_ops)
+		dev->dma_ops->unmap_sg(dev, sg, nents, direction);
+	else
+		dma_unmap_sg(dev->dma_device, sg, nents, direction);
+}
+
+static inline int ib_dma_map_sg_attrs(struct ib_device *dev,
+				      struct scatterlist *sg, int nents,
+				      enum dma_data_direction direction,
+				      struct dma_attrs *attrs)
+{
+	return dma_map_sg_attrs(dev->dma_device, sg, nents, direction, attrs);
+}
+
+static inline void ib_dma_unmap_sg_attrs(struct ib_device *dev,
+					 struct scatterlist *sg, int nents,
+					 enum dma_data_direction direction,
+					 struct dma_attrs *attrs)
+{
+	dma_unmap_sg_attrs(dev->dma_device, sg, nents, direction, attrs);
+}
+/**
+ * ib_sg_dma_address - Return the DMA address from a scatter/gather entry
+ * @dev: The device for which the DMA addresses were created
+ * @sg: The scatter/gather entry
+ */
+static inline u64 ib_sg_dma_address(struct ib_device *dev,
+				    struct scatterlist *sg)
+{
+	if (dev->dma_ops)
+		return dev->dma_ops->dma_address(dev, sg);
+	return sg_dma_address(sg);
+}
+
+/**
+ * ib_sg_dma_len - Return the DMA length from a scatter/gather entry
+ * @dev: The device for which the DMA addresses were created
+ * @sg: The scatter/gather entry
+ */
+static inline unsigned int ib_sg_dma_len(struct ib_device *dev,
+					 struct scatterlist *sg)
+{
+	if (dev->dma_ops)
+		return dev->dma_ops->dma_len(dev, sg);
+	return sg_dma_len(sg);
+}
+
+/**
+ * ib_dma_sync_single_for_cpu - Prepare DMA region to be accessed by CPU
+ * @dev: The device for which the DMA address was created
+ * @addr: The DMA address
+ * @size: The size of the region in bytes
+ * @dir: The direction of the DMA
+ */
+static inline void ib_dma_sync_single_for_cpu(struct ib_device *dev,
+					      u64 addr,
+					      size_t size,
+					      enum dma_data_direction dir)
+{
+	if (dev->dma_ops)
+		dev->dma_ops->sync_single_for_cpu(dev, addr, size, dir);
+	else
+		dma_sync_single_for_cpu(dev->dma_device, addr, size, dir);
+}
+
+/**
+ * ib_dma_sync_single_for_device - Prepare DMA region to be accessed by device
+ * @dev: The device for which the DMA address was created
+ * @addr: The DMA address
+ * @size: The size of the region in bytes
+ * @dir: The direction of the DMA
+ */
+static inline void ib_dma_sync_single_for_device(struct ib_device *dev,
+						 u64 addr,
+						 size_t size,
+						 enum dma_data_direction dir)
+{
+	if (dev->dma_ops)
+		dev->dma_ops->sync_single_for_device(dev, addr, size, dir);
+	else
+		dma_sync_single_for_device(dev->dma_device, addr, size, dir);
+}
+
+/**
+ * ib_dma_alloc_coherent - Allocate memory and map it for DMA
+ * @dev: The device for which the DMA address is requested
+ * @size: The size of the region to allocate in bytes
+ * @dma_handle: A pointer for returning the DMA address of the region
+ * @flag: memory allocator flags
+ */
+static inline void *ib_dma_alloc_coherent(struct ib_device *dev,
+					   size_t size,
+					   u64 *dma_handle,
+					   gfp_t flag)
+{
+	if (dev->dma_ops)
+		return dev->dma_ops->alloc_coherent(dev, size, dma_handle, flag);
+	else {
+		dma_addr_t handle;
+		void *ret;
+
+		ret = dma_alloc_coherent(dev->dma_device, size, &handle, flag);
+		*dma_handle = handle;
+		return ret;
+	}
+}
+
+/**
+ * ib_dma_free_coherent - Free memory allocated by ib_dma_alloc_coherent()
+ * @dev: The device for which the DMA addresses were allocated
+ * @size: The size of the region
+ * @cpu_addr: the address returned by ib_dma_alloc_coherent()
+ * @dma_handle: the DMA address returned by ib_dma_alloc_coherent()
+ */
+static inline void ib_dma_free_coherent(struct ib_device *dev,
+					size_t size, void *cpu_addr,
+					u64 dma_handle)
+{
+	if (dev->dma_ops)
+		dev->dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
+	else
+		dma_free_coherent(dev->dma_device, size, cpu_addr, dma_handle);
+}
+
+/**
+ * ib_reg_phys_mr - Prepares a virtually addressed memory region for use
+ *   by an HCA.
+ * @pd: The protection domain associated assigned to the registered region.
+ * @phys_buf_array: Specifies a list of physical buffers to use in the
+ *   memory region.
+ * @num_phys_buf: Specifies the size of the phys_buf_array.
+ * @mr_access_flags: Specifies the memory access rights.
+ * @iova_start: The offset of the region's starting I/O virtual address.
+ */
+struct ib_mr *ib_reg_phys_mr(struct ib_pd *pd,
+			     struct ib_phys_buf *phys_buf_array,
+			     int num_phys_buf,
+			     int mr_access_flags,
+			     u64 *iova_start);
+
+/**
+ * ib_rereg_phys_mr - Modifies the attributes of an existing memory region.
+ *   Conceptually, this call performs the functions deregister memory region
+ *   followed by register physical memory region.  Where possible,
+ *   resources are reused instead of deallocated and reallocated.
+ * @mr: The memory region to modify.
+ * @mr_rereg_mask: A bit-mask used to indicate which of the following
+ *   properties of the memory region are being modified.
+ * @pd: If %IB_MR_REREG_PD is set in mr_rereg_mask, this field specifies
+ *   the new protection domain to associated with the memory region,
+ *   otherwise, this parameter is ignored.
+ * @phys_buf_array: If %IB_MR_REREG_TRANS is set in mr_rereg_mask, this
+ *   field specifies a list of physical buffers to use in the new
+ *   translation, otherwise, this parameter is ignored.
+ * @num_phys_buf: If %IB_MR_REREG_TRANS is set in mr_rereg_mask, this
+ *   field specifies the size of the phys_buf_array, otherwise, this
+ *   parameter is ignored.
+ * @mr_access_flags: If %IB_MR_REREG_ACCESS is set in mr_rereg_mask, this
+ *   field specifies the new memory access rights, otherwise, this
+ *   parameter is ignored.
+ * @iova_start: The offset of the region's starting I/O virtual address.
+ */
+int ib_rereg_phys_mr(struct ib_mr *mr,
+		     int mr_rereg_mask,
+		     struct ib_pd *pd,
+		     struct ib_phys_buf *phys_buf_array,
+		     int num_phys_buf,
+		     int mr_access_flags,
+		     u64 *iova_start);
+
+/**
+ * ib_query_mr - Retrieves information about a specific memory region.
+ * @mr: The memory region to retrieve information about.
+ * @mr_attr: The attributes of the specified memory region.
+ */
+int ib_query_mr(struct ib_mr *mr, struct ib_mr_attr *mr_attr);
+
+/**
+ * ib_dereg_mr - Deregisters a memory region and removes it from the
+ *   HCA translation table.
+ * @mr: The memory region to deregister.
+ */
+int ib_dereg_mr(struct ib_mr *mr);
+
+/**
+ * ib_alloc_fast_reg_mr - Allocates memory region usable with the
+ *   IB_WR_FAST_REG_MR send work request.
+ * @pd: The protection domain associated with the region.
+ * @max_page_list_len: requested max physical buffer list length to be
+ *   used with fast register work requests for this MR.
+ */
+struct ib_mr *ib_alloc_fast_reg_mr(struct ib_pd *pd, int max_page_list_len);
+
+/**
+ * ib_alloc_fast_reg_page_list - Allocates a page list array
+ * @device - ib device pointer.
+ * @page_list_len - size of the page list array to be allocated.
+ *
+ * This allocates and returns a struct ib_fast_reg_page_list * and a
+ * page_list array that is at least page_list_len in size.  The actual
+ * size is returned in max_page_list_len.  The caller is responsible
+ * for initializing the contents of the page_list array before posting
+ * a send work request with the IB_WC_FAST_REG_MR opcode.
+ *
+ * The page_list array entries must be translated using one of the
+ * ib_dma_*() functions just like the addresses passed to
+ * ib_map_phys_fmr().  Once the ib_post_send() is issued, the struct
+ * ib_fast_reg_page_list must not be modified by the caller until the
+ * IB_WC_FAST_REG_MR work request completes.
+ */
+struct ib_fast_reg_page_list *ib_alloc_fast_reg_page_list(
+				struct ib_device *device, int page_list_len);
+
+/**
+ * ib_free_fast_reg_page_list - Deallocates a previously allocated
+ *   page list array.
+ * @page_list - struct ib_fast_reg_page_list pointer to be deallocated.
+ */
+void ib_free_fast_reg_page_list(struct ib_fast_reg_page_list *page_list);
+
+/**
+ * ib_update_fast_reg_key - updates the key portion of the fast_reg MR
+ *   R_Key and L_Key.
+ * @mr - struct ib_mr pointer to be updated.
+ * @newkey - new key to be used.
+ */
+static inline void ib_update_fast_reg_key(struct ib_mr *mr, u8 newkey)
+{
+	mr->lkey = (mr->lkey & 0xffffff00) | newkey;
+	mr->rkey = (mr->rkey & 0xffffff00) | newkey;
+}
+
+/**
+ * ib_alloc_mw - Allocates a memory window.
+ * @pd: The protection domain associated with the memory window.
+ */
+struct ib_mw *ib_alloc_mw(struct ib_pd *pd);
+
+/**
+ * ib_bind_mw - Posts a work request to the send queue of the specified
+ *   QP, which binds the memory window to the given address range and
+ *   remote access attributes.
+ * @qp: QP to post the bind work request on.
+ * @mw: The memory window to bind.
+ * @mw_bind: Specifies information about the memory window, including
+ *   its address range, remote access rights, and associated memory region.
+ */
+static inline int ib_bind_mw(struct ib_qp *qp,
+			     struct ib_mw *mw,
+			     struct ib_mw_bind *mw_bind)
+{
+	/* XXX reference counting in corresponding MR? */
+	return mw->device->bind_mw ?
+		mw->device->bind_mw(qp, mw, mw_bind) :
+		-ENOSYS;
+}
+
+/**
+ * ib_dealloc_mw - Deallocates a memory window.
+ * @mw: The memory window to deallocate.
+ */
+int ib_dealloc_mw(struct ib_mw *mw);
+
+/**
+ * ib_alloc_fmr - Allocates a unmapped fast memory region.
+ * @pd: The protection domain associated with the unmapped region.
+ * @mr_access_flags: Specifies the memory access rights.
+ * @fmr_attr: Attributes of the unmapped region.
+ *
+ * A fast memory region must be mapped before it can be used as part of
+ * a work request.
+ */
+struct ib_fmr *ib_alloc_fmr(struct ib_pd *pd,
+			    int mr_access_flags,
+			    struct ib_fmr_attr *fmr_attr);
+
+/**
+ * ib_map_phys_fmr - Maps a list of physical pages to a fast memory region.
+ * @fmr: The fast memory region to associate with the pages.
+ * @page_list: An array of physical pages to map to the fast memory region.
+ * @list_len: The number of pages in page_list.
+ * @iova: The I/O virtual address to use with the mapped region.
+ */
+static inline int ib_map_phys_fmr(struct ib_fmr *fmr,
+				  u64 *page_list, int list_len,
+				  u64 iova)
+{
+	return fmr->device->map_phys_fmr(fmr, page_list, list_len, iova);
+}
+
+/**
+ * ib_unmap_fmr - Removes the mapping from a list of fast memory regions.
+ * @fmr_list: A linked list of fast memory regions to unmap.
+ */
+int ib_unmap_fmr(struct list_head *fmr_list);
+
+/**
+ * ib_dealloc_fmr - Deallocates a fast memory region.
+ * @fmr: The fast memory region to deallocate.
+ */
+int ib_dealloc_fmr(struct ib_fmr *fmr);
+
+/**
+ * ib_attach_mcast - Attaches the specified QP to a multicast group.
+ * @qp: QP to attach to the multicast group.  The QP must be type
+ *   IB_QPT_UD.
+ * @gid: Multicast group GID.
+ * @lid: Multicast group LID in host byte order.
+ *
+ * In order to send and receive multicast packets, subnet
+ * administration must have created the multicast group and configured
+ * the fabric appropriately.  The port associated with the specified
+ * QP must also be a member of the multicast group.
+ */
+int ib_attach_mcast(struct ib_qp *qp, union ib_gid *gid, u16 lid);
+
+/**
+ * ib_detach_mcast - Detaches the specified QP from a multicast group.
+ * @qp: QP to detach from the multicast group.
+ * @gid: Multicast group GID.
+ * @lid: Multicast group LID in host byte order.
+ */
+int ib_detach_mcast(struct ib_qp *qp, union ib_gid *gid, u16 lid);
+
+/**
+ * ib_alloc_xrcd - Allocates an XRC domain.
+ * @device: The device on which to allocate the XRC domain.
+ */
+struct ib_xrcd *ib_alloc_xrcd(struct ib_device *device);
+
+/**
+ * ib_dealloc_xrcd - Deallocates an XRC domain.
+ * @xrcd: The XRC domain to deallocate.
+ */
+int ib_dealloc_xrcd(struct ib_xrcd *xrcd);
+
+#endif /* IB_VERBS_H */
diff --git a/include/rdma/iw_cm.h b/include/rdma/iw_cm.h
new file mode 100644
index 00000000..1a046b15
--- /dev/null
+++ b/include/rdma/iw_cm.h
@@ -0,0 +1,251 @@
+/*
+ * Copyright (c) 2005 Network Appliance, Inc. All rights reserved.
+ * Copyright (c) 2005 Open Grid Computing, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef IW_CM_H
+#define IW_CM_H
+
+#include <linux/in.h>
+#include <rdma/ib_cm.h>
+
+struct iw_cm_id;
+
+enum iw_cm_event_type {
+	IW_CM_EVENT_CONNECT_REQUEST = 1, /* connect request received */
+	IW_CM_EVENT_CONNECT_REPLY,	 /* reply from active connect request */
+	IW_CM_EVENT_ESTABLISHED,	 /* passive side accept successful */
+	IW_CM_EVENT_DISCONNECT,		 /* orderly shutdown */
+	IW_CM_EVENT_CLOSE		 /* close complete */
+};
+
+struct iw_cm_event {
+	enum iw_cm_event_type event;
+	int			 status;
+	struct sockaddr_in local_addr;
+	struct sockaddr_in remote_addr;
+	void *private_data;
+	void *provider_data;
+	u8 private_data_len;
+	u8 ord;
+	u8 ird;
+};
+
+/**
+ * iw_cm_handler - Function to be called by the IW CM when delivering events
+ * to the client.
+ *
+ * @cm_id: The IW CM identifier associated with the event.
+ * @event: Pointer to the event structure.
+ */
+typedef int (*iw_cm_handler)(struct iw_cm_id *cm_id,
+			     struct iw_cm_event *event);
+
+/**
+ * iw_event_handler - Function called by the provider when delivering provider
+ * events to the IW CM.  Returns either 0 indicating the event was processed
+ * or -errno if the event could not be processed.
+ *
+ * @cm_id: The IW CM identifier associated with the event.
+ * @event: Pointer to the event structure.
+ */
+typedef int (*iw_event_handler)(struct iw_cm_id *cm_id,
+				 struct iw_cm_event *event);
+
+struct iw_cm_id {
+	iw_cm_handler		cm_handler;      /* client callback function */
+	void		        *context;	 /* client cb context */
+	struct ib_device	*device;
+	struct sockaddr_in      local_addr;
+	struct sockaddr_in	remote_addr;
+	void			*provider_data;	 /* provider private data */
+	iw_event_handler        event_handler;   /* cb for provider
+						    events */
+	/* Used by provider to add and remove refs on IW cm_id */
+	void (*add_ref)(struct iw_cm_id *);
+	void (*rem_ref)(struct iw_cm_id *);
+};
+
+struct iw_cm_conn_param {
+	const void *private_data;
+	u16 private_data_len;
+	u32 ord;
+	u32 ird;
+	u32 qpn;
+};
+
+struct iw_cm_verbs {
+	void		(*add_ref)(struct ib_qp *qp);
+
+	void		(*rem_ref)(struct ib_qp *qp);
+
+	struct ib_qp *	(*get_qp)(struct ib_device *device,
+				  int qpn);
+
+	int		(*connect)(struct iw_cm_id *cm_id,
+				   struct iw_cm_conn_param *conn_param);
+
+	int		(*accept)(struct iw_cm_id *cm_id,
+				  struct iw_cm_conn_param *conn_param);
+
+	int		(*reject)(struct iw_cm_id *cm_id,
+				  const void *pdata, u8 pdata_len);
+
+	int		(*create_listen)(struct iw_cm_id *cm_id,
+					 int backlog);
+
+	int		(*destroy_listen)(struct iw_cm_id *cm_id);
+};
+
+/**
+ * iw_create_cm_id - Create an IW CM identifier.
+ *
+ * @device: The IB device on which to create the IW CM identier.
+ * @event_handler: User callback invoked to report events associated with the
+ *   returned IW CM identifier.
+ * @context: User specified context associated with the id.
+ */
+struct iw_cm_id *iw_create_cm_id(struct ib_device *device,
+				 iw_cm_handler cm_handler, void *context);
+
+/**
+ * iw_destroy_cm_id - Destroy an IW CM identifier.
+ *
+ * @cm_id: The previously created IW CM identifier to destroy.
+ *
+ * The client can assume that no events will be delivered for the CM ID after
+ * this function returns.
+ */
+void iw_destroy_cm_id(struct iw_cm_id *cm_id);
+
+/**
+ * iw_cm_bind_qp - Unbind the specified IW CM identifier and QP
+ *
+ * @cm_id: The IW CM idenfier to unbind from the QP.
+ * @qp: The QP
+ *
+ * This is called by the provider when destroying the QP to ensure
+ * that any references held by the IWCM are released. It may also
+ * be called by the IWCM when destroying a CM_ID to that any
+ * references held by the provider are released.
+ */
+void iw_cm_unbind_qp(struct iw_cm_id *cm_id, struct ib_qp *qp);
+
+/**
+ * iw_cm_get_qp - Return the ib_qp associated with a QPN
+ *
+ * @ib_device: The IB device
+ * @qpn: The queue pair number
+ */
+struct ib_qp *iw_cm_get_qp(struct ib_device *device, int qpn);
+
+/**
+ * iw_cm_listen - Listen for incoming connection requests on the
+ * specified IW CM id.
+ *
+ * @cm_id: The IW CM identifier.
+ * @backlog: The maximum number of outstanding un-accepted inbound listen
+ *   requests to queue.
+ *
+ * The source address and port number are specified in the IW CM identifier
+ * structure.
+ */
+int iw_cm_listen(struct iw_cm_id *cm_id, int backlog);
+
+/**
+ * iw_cm_accept - Called to accept an incoming connect request.
+ *
+ * @cm_id: The IW CM identifier associated with the connection request.
+ * @iw_param: Pointer to a structure containing connection establishment
+ *   parameters.
+ *
+ * The specified cm_id will have been provided in the event data for a
+ * CONNECT_REQUEST event. Subsequent events related to this connection will be
+ * delivered to the specified IW CM identifier prior and may occur prior to
+ * the return of this function. If this function returns a non-zero value, the
+ * client can assume that no events will be delivered to the specified IW CM
+ * identifier.
+ */
+int iw_cm_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *iw_param);
+
+/**
+ * iw_cm_reject - Reject an incoming connection request.
+ *
+ * @cm_id: Connection identifier associated with the request.
+ * @private_daa: Pointer to data to deliver to the remote peer as part of the
+ *   reject message.
+ * @private_data_len: The number of bytes in the private_data parameter.
+ *
+ * The client can assume that no events will be delivered to the specified IW
+ * CM identifier following the return of this function. The private_data
+ * buffer is available for reuse when this function returns.
+ */
+int iw_cm_reject(struct iw_cm_id *cm_id, const void *private_data,
+		 u8 private_data_len);
+
+/**
+ * iw_cm_connect - Called to request a connection to a remote peer.
+ *
+ * @cm_id: The IW CM identifier for the connection.
+ * @iw_param: Pointer to a structure containing connection  establishment
+ *   parameters.
+ *
+ * Events may be delivered to the specified IW CM identifier prior to the
+ * return of this function. If this function returns a non-zero value, the
+ * client can assume that no events will be delivered to the specified IW CM
+ * identifier.
+ */
+int iw_cm_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *iw_param);
+
+/**
+ * iw_cm_disconnect - Close the specified connection.
+ *
+ * @cm_id: The IW CM identifier to close.
+ * @abrupt: If 0, the connection will be closed gracefully, otherwise, the
+ *   connection will be reset.
+ *
+ * The IW CM identifier is still active until the IW_CM_EVENT_CLOSE event is
+ * delivered.
+ */
+int iw_cm_disconnect(struct iw_cm_id *cm_id, int abrupt);
+
+/**
+ * iw_cm_init_qp_attr - Called to initialize the attributes of the QP
+ * associated with a IW CM identifier.
+ *
+ * @cm_id: The IW CM identifier associated with the QP
+ * @qp_attr: Pointer to the QP attributes structure.
+ * @qp_attr_mask: Pointer to a bit vector specifying which QP attributes are
+ *   valid.
+ */
+int iw_cm_init_qp_attr(struct iw_cm_id *cm_id, struct ib_qp_attr *qp_attr,
+		       int *qp_attr_mask);
+
+#endif /* IW_CM_H */
diff --git a/include/rdma/rdma_cm.h b/include/rdma/rdma_cm.h
new file mode 100644
index 00000000..51988f80
--- /dev/null
+++ b/include/rdma/rdma_cm.h
@@ -0,0 +1,360 @@
+/*
+ * Copyright (c) 2005 Voltaire Inc.  All rights reserved.
+ * Copyright (c) 2005 Intel Corporation.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#if !defined(RDMA_CM_H)
+#define RDMA_CM_H
+
+#include <linux/socket.h>
+#include <linux/in6.h>
+#include <rdma/ib_addr.h>
+#include <rdma/ib_sa.h>
+
+/*
+ * Upon receiving a device removal event, users must destroy the associated
+ * RDMA identifier and release all resources allocated with the device.
+ */
+enum rdma_cm_event_type {
+	RDMA_CM_EVENT_ADDR_RESOLVED,
+	RDMA_CM_EVENT_ADDR_ERROR,
+	RDMA_CM_EVENT_ROUTE_RESOLVED,
+	RDMA_CM_EVENT_ROUTE_ERROR,
+	RDMA_CM_EVENT_CONNECT_REQUEST,
+	RDMA_CM_EVENT_CONNECT_RESPONSE,
+	RDMA_CM_EVENT_CONNECT_ERROR,
+	RDMA_CM_EVENT_UNREACHABLE,
+	RDMA_CM_EVENT_REJECTED,
+	RDMA_CM_EVENT_ESTABLISHED,
+	RDMA_CM_EVENT_DISCONNECTED,
+	RDMA_CM_EVENT_DEVICE_REMOVAL,
+	RDMA_CM_EVENT_MULTICAST_JOIN,
+	RDMA_CM_EVENT_MULTICAST_ERROR,
+	RDMA_CM_EVENT_ADDR_CHANGE,
+	RDMA_CM_EVENT_TIMEWAIT_EXIT
+};
+
+enum rdma_port_space {
+	RDMA_PS_SDP   = 0x0001,
+	RDMA_PS_IPOIB = 0x0002,
+	RDMA_PS_IB    = 0x013F,
+	RDMA_PS_TCP   = 0x0106,
+	RDMA_PS_UDP   = 0x0111,
+};
+
+struct rdma_addr {
+	struct sockaddr_storage src_addr;
+	struct sockaddr_storage dst_addr;
+	struct rdma_dev_addr dev_addr;
+};
+
+struct rdma_route {
+	struct rdma_addr addr;
+	struct ib_sa_path_rec *path_rec;
+	int num_paths;
+};
+
+struct rdma_conn_param {
+	const void *private_data;
+	u8 private_data_len;
+	u8 responder_resources;
+	u8 initiator_depth;
+	u8 flow_control;
+	u8 retry_count;		/* ignored when accepting */
+	u8 rnr_retry_count;
+	/* Fields below ignored if a QP is created on the rdma_cm_id. */
+	u8 srq;
+	u32 qp_num;
+};
+
+struct rdma_ud_param {
+	const void *private_data;
+	u8 private_data_len;
+	struct ib_ah_attr ah_attr;
+	u32 qp_num;
+	u32 qkey;
+};
+
+struct rdma_cm_event {
+	enum rdma_cm_event_type	 event;
+	int			 status;
+	union {
+		struct rdma_conn_param	conn;
+		struct rdma_ud_param	ud;
+	} param;
+};
+
+enum rdma_cm_state {
+	RDMA_CM_IDLE,
+	RDMA_CM_ADDR_QUERY,
+	RDMA_CM_ADDR_RESOLVED,
+	RDMA_CM_ROUTE_QUERY,
+	RDMA_CM_ROUTE_RESOLVED,
+	RDMA_CM_CONNECT,
+	RDMA_CM_DISCONNECT,
+	RDMA_CM_ADDR_BOUND,
+	RDMA_CM_LISTEN,
+	RDMA_CM_DEVICE_REMOVAL,
+	RDMA_CM_DESTROYING
+};
+
+struct rdma_cm_id;
+
+/**
+ * rdma_cm_event_handler - Callback used to report user events.
+ *
+ * Notes: Users may not call rdma_destroy_id from this callback to destroy
+ *   the passed in id, or a corresponding listen id.  Returning a
+ *   non-zero value from the callback will destroy the passed in id.
+ */
+typedef int (*rdma_cm_event_handler)(struct rdma_cm_id *id,
+				     struct rdma_cm_event *event);
+
+struct rdma_cm_id {
+	struct ib_device	*device;
+	void			*context;
+	struct ib_qp		*qp;
+	rdma_cm_event_handler	 event_handler;
+	struct rdma_route	 route;
+	enum rdma_port_space	 ps;
+	enum ib_qp_type		 qp_type;
+	u8			 port_num;
+};
+
+/**
+ * rdma_create_id - Create an RDMA identifier.
+ *
+ * @event_handler: User callback invoked to report events associated with the
+ *   returned rdma_id.
+ * @context: User specified context associated with the id.
+ * @ps: RDMA port space.
+ * @qp_type: type of queue pair associated with the id.
+ */
+struct rdma_cm_id *rdma_create_id(rdma_cm_event_handler event_handler,
+				  void *context, enum rdma_port_space ps,
+				  enum ib_qp_type qp_type);
+
+/**
+  * rdma_destroy_id - Destroys an RDMA identifier.
+  *
+  * @id: RDMA identifier.
+  *
+  * Note: calling this function has the effect of canceling in-flight
+  * asynchronous operations associated with the id.
+  */
+void rdma_destroy_id(struct rdma_cm_id *id);
+
+/**
+ * rdma_bind_addr - Bind an RDMA identifier to a source address and
+ *   associated RDMA device, if needed.
+ *
+ * @id: RDMA identifier.
+ * @addr: Local address information.  Wildcard values are permitted.
+ *
+ * This associates a source address with the RDMA identifier before calling
+ * rdma_listen.  If a specific local address is given, the RDMA identifier will
+ * be bound to a local RDMA device.
+ */
+int rdma_bind_addr(struct rdma_cm_id *id, struct sockaddr *addr);
+
+/**
+ * rdma_resolve_addr - Resolve destination and optional source addresses
+ *   from IP addresses to an RDMA address.  If successful, the specified
+ *   rdma_cm_id will be bound to a local device.
+ *
+ * @id: RDMA identifier.
+ * @src_addr: Source address information.  This parameter may be NULL.
+ * @dst_addr: Destination address information.
+ * @timeout_ms: Time to wait for resolution to complete.
+ */
+int rdma_resolve_addr(struct rdma_cm_id *id, struct sockaddr *src_addr,
+		      struct sockaddr *dst_addr, int timeout_ms);
+
+/**
+ * rdma_resolve_route - Resolve the RDMA address bound to the RDMA identifier
+ *   into route information needed to establish a connection.
+ *
+ * This is called on the client side of a connection.
+ * Users must have first called rdma_resolve_addr to resolve a dst_addr
+ * into an RDMA address before calling this routine.
+ */
+int rdma_resolve_route(struct rdma_cm_id *id, int timeout_ms);
+
+/**
+ * rdma_create_qp - Allocate a QP and associate it with the specified RDMA
+ * identifier.
+ *
+ * QPs allocated to an rdma_cm_id will automatically be transitioned by the CMA
+ * through their states.
+ */
+int rdma_create_qp(struct rdma_cm_id *id, struct ib_pd *pd,
+		   struct ib_qp_init_attr *qp_init_attr);
+
+/**
+ * rdma_destroy_qp - Deallocate the QP associated with the specified RDMA
+ * identifier.
+ *
+ * Users must destroy any QP associated with an RDMA identifier before
+ * destroying the RDMA ID.
+ */
+void rdma_destroy_qp(struct rdma_cm_id *id);
+
+/**
+ * rdma_init_qp_attr - Initializes the QP attributes for use in transitioning
+ *   to a specified QP state.
+ * @id: Communication identifier associated with the QP attributes to
+ *   initialize.
+ * @qp_attr: On input, specifies the desired QP state.  On output, the
+ *   mandatory and desired optional attributes will be set in order to
+ *   modify the QP to the specified state.
+ * @qp_attr_mask: The QP attribute mask that may be used to transition the
+ *   QP to the specified state.
+ *
+ * Users must set the @qp_attr->qp_state to the desired QP state.  This call
+ * will set all required attributes for the given transition, along with
+ * known optional attributes.  Users may override the attributes returned from
+ * this call before calling ib_modify_qp.
+ *
+ * Users that wish to have their QP automatically transitioned through its
+ * states can associate a QP with the rdma_cm_id by calling rdma_create_qp().
+ */
+int rdma_init_qp_attr(struct rdma_cm_id *id, struct ib_qp_attr *qp_attr,
+		       int *qp_attr_mask);
+
+/**
+ * rdma_connect - Initiate an active connection request.
+ * @id: Connection identifier to connect.
+ * @conn_param: Connection information used for connected QPs.
+ *
+ * Users must have resolved a route for the rdma_cm_id to connect with
+ * by having called rdma_resolve_route before calling this routine.
+ *
+ * This call will either connect to a remote QP or obtain remote QP
+ * information for unconnected rdma_cm_id's.  The actual operation is
+ * based on the rdma_cm_id's port space.
+ */
+int rdma_connect(struct rdma_cm_id *id, struct rdma_conn_param *conn_param);
+
+/**
+ * rdma_listen - This function is called by the passive side to
+ *   listen for incoming connection requests.
+ *
+ * Users must have bound the rdma_cm_id to a local address by calling
+ * rdma_bind_addr before calling this routine.
+ */
+int rdma_listen(struct rdma_cm_id *id, int backlog);
+
+/**
+ * rdma_accept - Called to accept a connection request or response.
+ * @id: Connection identifier associated with the request.
+ * @conn_param: Information needed to establish the connection.  This must be
+ *   provided if accepting a connection request.  If accepting a connection
+ *   response, this parameter must be NULL.
+ *
+ * Typically, this routine is only called by the listener to accept a connection
+ * request.  It must also be called on the active side of a connection if the
+ * user is performing their own QP transitions.
+ *
+ * In the case of error, a reject message is sent to the remote side and the
+ * state of the qp associated with the id is modified to error, such that any
+ * previously posted receive buffers would be flushed.
+ */
+int rdma_accept(struct rdma_cm_id *id, struct rdma_conn_param *conn_param);
+
+/**
+ * rdma_notify - Notifies the RDMA CM of an asynchronous event that has
+ * occurred on the connection.
+ * @id: Connection identifier to transition to established.
+ * @event: Asynchronous event.
+ *
+ * This routine should be invoked by users to notify the CM of relevant
+ * communication events.  Events that should be reported to the CM and
+ * when to report them are:
+ *
+ * IB_EVENT_COMM_EST - Used when a message is received on a connected
+ *    QP before an RTU has been received.
+ */
+int rdma_notify(struct rdma_cm_id *id, enum ib_event_type event);
+
+/**
+ * rdma_reject - Called to reject a connection request or response.
+ */
+int rdma_reject(struct rdma_cm_id *id, const void *private_data,
+		u8 private_data_len);
+
+/**
+ * rdma_disconnect - This function disconnects the associated QP and
+ *   transitions it into the error state.
+ */
+int rdma_disconnect(struct rdma_cm_id *id);
+
+/**
+ * rdma_join_multicast - Join the multicast group specified by the given
+ *   address.
+ * @id: Communication identifier associated with the request.
+ * @addr: Multicast address identifying the group to join.
+ * @context: User-defined context associated with the join request, returned
+ * to the user through the private_data pointer in multicast events.
+ */
+int rdma_join_multicast(struct rdma_cm_id *id, struct sockaddr *addr,
+			void *context);
+
+/**
+ * rdma_leave_multicast - Leave the multicast group specified by the given
+ *   address.
+ */
+void rdma_leave_multicast(struct rdma_cm_id *id, struct sockaddr *addr);
+
+/**
+ * rdma_set_service_type - Set the type of service associated with a
+ *   connection identifier.
+ * @id: Communication identifier to associated with service type.
+ * @tos: Type of service.
+ *
+ * The type of service is interpretted as a differentiated service
+ * field (RFC 2474).  The service type should be specified before
+ * performing route resolution, as existing communication on the
+ * connection identifier may be unaffected.  The type of service
+ * requested may not be supported by the network to all destinations.
+ */
+void rdma_set_service_type(struct rdma_cm_id *id, int tos);
+
+/**
+ * rdma_set_reuseaddr - Allow the reuse of local addresses when binding
+ *    the rdma_cm_id.
+ * @id: Communication identifier to configure.
+ * @reuse: Value indicating if the bound address is reusable.
+ *
+ * Reuse must be set before an address is bound to the id.
+ */
+int rdma_set_reuseaddr(struct rdma_cm_id *id, int reuse);
+
+#endif /* RDMA_CM_H */
diff --git a/include/rdma/rdma_cm_ib.h b/include/rdma/rdma_cm_ib.h
new file mode 100644
index 00000000..2389c3b4
--- /dev/null
+++ b/include/rdma/rdma_cm_ib.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright (c) 2006 Intel Corporation.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#if !defined(RDMA_CM_IB_H)
+#define RDMA_CM_IB_H
+
+#include <rdma/rdma_cm.h>
+
+/**
+ * rdma_set_ib_paths - Manually sets the path records used to establish a
+ *   connection.
+ * @id: Connection identifier associated with the request.
+ * @path_rec: Reference to the path record
+ *
+ * This call permits a user to specify routing information for rdma_cm_id's
+ * bound to Infiniband devices.  It is called on the client side of a
+ * connection and replaces the call to rdma_resolve_route.
+ */
+int rdma_set_ib_paths(struct rdma_cm_id *id,
+		      struct ib_sa_path_rec *path_rec, int num_paths);
+
+/* Global qkey for UDP QPs and multicast groups. */
+#define RDMA_UDP_QKEY 0x01234567
+
+#endif /* RDMA_CM_IB_H */
diff --git a/include/rdma/rdma_netlink.h b/include/rdma/rdma_netlink.h
new file mode 100644
index 00000000..3c5363ab
--- /dev/null
+++ b/include/rdma/rdma_netlink.h
@@ -0,0 +1,92 @@
+#ifndef _RDMA_NETLINK_H
+#define _RDMA_NETLINK_H
+
+#include <linux/types.h>
+
+enum {
+	RDMA_NL_RDMA_CM = 1
+};
+
+#define RDMA_NL_GET_CLIENT(type) ((type & (((1 << 6) - 1) << 10)) >> 10)
+#define RDMA_NL_GET_OP(type) (type & ((1 << 10) - 1))
+#define RDMA_NL_GET_TYPE(client, op) ((client << 10) + op)
+
+enum {
+	RDMA_NL_RDMA_CM_ID_STATS = 0,
+	RDMA_NL_RDMA_CM_NUM_OPS
+};
+
+enum {
+	RDMA_NL_RDMA_CM_ATTR_SRC_ADDR = 1,
+	RDMA_NL_RDMA_CM_ATTR_DST_ADDR,
+	RDMA_NL_RDMA_CM_NUM_ATTR,
+};
+
+struct rdma_cm_id_stats {
+	__u32	qp_num;
+	__u32	bound_dev_if;
+	__u32	port_space;
+	__s32	pid;
+	__u8	cm_state;
+	__u8	node_type;
+	__u8	port_num;
+	__u8	qp_type;
+};
+
+#ifdef __KERNEL__
+
+#include <linux/netlink.h>
+
+struct ibnl_client_cbs {
+	int (*dump)(struct sk_buff *skb, struct netlink_callback *nlcb);
+};
+
+int ibnl_init(void);
+void ibnl_cleanup(void);
+
+/**
+ * Add a a client to the list of IB netlink exporters.
+ * @index: Index of the added client
+ * @nops: Number of supported ops by the added client.
+ * @cb_table: A table for op->callback
+ *
+ * Returns 0 on success or a negative error code.
+ */
+int ibnl_add_client(int index, int nops,
+		    const struct ibnl_client_cbs cb_table[]);
+
+/**
+ * Remove a client from IB netlink.
+ * @index: Index of the removed IB client.
+ *
+ * Returns 0 on success or a negative error code.
+ */
+int ibnl_remove_client(int index);
+
+/**
+ * Put a new message in a supplied skb.
+ * @skb: The netlink skb.
+ * @nlh: Pointer to put the header of the new netlink message.
+ * @seq: The message sequence number.
+ * @len: The requested message length to allocate.
+ * @client: Calling IB netlink client.
+ * @op: message content op.
+ * Returns the allocated buffer on success and NULL on failure.
+ */
+void *ibnl_put_msg(struct sk_buff *skb, struct nlmsghdr **nlh, int seq,
+		   int len, int client, int op);
+/**
+ * Put a new attribute in a supplied skb.
+ * @skb: The netlink skb.
+ * @nlh: Header of the netlink message to append the attribute to.
+ * @len: The length of the attribute data.
+ * @data: The attribute data to put.
+ * @type: The attribute type.
+ * Returns the 0 and a negative error code on failure.
+ */
+int ibnl_put_attr(struct sk_buff *skb, struct nlmsghdr *nlh,
+		  int len, void *data, int type);
+
+#endif /* __KERNEL__ */
+
+#endif /* _RDMA_NETLINK_H */
diff --git a/include/rdma/rdma_user_cm.h b/include/rdma/rdma_user_cm.h
new file mode 100644
index 00000000..5348a000
--- /dev/null
+++ b/include/rdma/rdma_user_cm.h
@@ -0,0 +1,248 @@
+/*
+ * Copyright (c) 2005-2006 Intel Corporation.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef RDMA_USER_CM_H
+#define RDMA_USER_CM_H
+
+#include <linux/types.h>
+#include <linux/in6.h>
+#include <rdma/ib_user_verbs.h>
+#include <rdma/ib_user_sa.h>
+
+#define RDMA_USER_CM_ABI_VERSION	4
+
+#define RDMA_MAX_PRIVATE_DATA		256
+
+enum {
+	RDMA_USER_CM_CMD_CREATE_ID,
+	RDMA_USER_CM_CMD_DESTROY_ID,
+	RDMA_USER_CM_CMD_BIND_ADDR,
+	RDMA_USER_CM_CMD_RESOLVE_ADDR,
+	RDMA_USER_CM_CMD_RESOLVE_ROUTE,
+	RDMA_USER_CM_CMD_QUERY_ROUTE,
+	RDMA_USER_CM_CMD_CONNECT,
+	RDMA_USER_CM_CMD_LISTEN,
+	RDMA_USER_CM_CMD_ACCEPT,
+	RDMA_USER_CM_CMD_REJECT,
+	RDMA_USER_CM_CMD_DISCONNECT,
+	RDMA_USER_CM_CMD_INIT_QP_ATTR,
+	RDMA_USER_CM_CMD_GET_EVENT,
+	RDMA_USER_CM_CMD_GET_OPTION,
+	RDMA_USER_CM_CMD_SET_OPTION,
+	RDMA_USER_CM_CMD_NOTIFY,
+	RDMA_USER_CM_CMD_JOIN_MCAST,
+	RDMA_USER_CM_CMD_LEAVE_MCAST,
+	RDMA_USER_CM_CMD_MIGRATE_ID
+};
+
+/*
+ * command ABI structures.
+ */
+struct rdma_ucm_cmd_hdr {
+	__u32 cmd;
+	__u16 in;
+	__u16 out;
+};
+
+struct rdma_ucm_create_id {
+	__u64 uid;
+	__u64 response;
+	__u16 ps;
+	__u8  qp_type;
+	__u8  reserved[5];
+};
+
+struct rdma_ucm_create_id_resp {
+	__u32 id;
+};
+
+struct rdma_ucm_destroy_id {
+	__u64 response;
+	__u32 id;
+	__u32 reserved;
+};
+
+struct rdma_ucm_destroy_id_resp {
+	__u32 events_reported;
+};
+
+struct rdma_ucm_bind_addr {
+	__u64 response;
+	struct sockaddr_in6 addr;
+	__u32 id;
+};
+
+struct rdma_ucm_resolve_addr {
+	struct sockaddr_in6 src_addr;
+	struct sockaddr_in6 dst_addr;
+	__u32 id;
+	__u32 timeout_ms;
+};
+
+struct rdma_ucm_resolve_route {
+	__u32 id;
+	__u32 timeout_ms;
+};
+
+struct rdma_ucm_query_route {
+	__u64 response;
+	__u32 id;
+	__u32 reserved;
+};
+
+struct rdma_ucm_query_route_resp {
+	__u64 node_guid;
+	struct ib_user_path_rec ib_route[2];
+	struct sockaddr_in6 src_addr;
+	struct sockaddr_in6 dst_addr;
+	__u32 num_paths;
+	__u8 port_num;
+	__u8 reserved[3];
+};
+
+struct rdma_ucm_conn_param {
+	__u32 qp_num;
+	__u32 reserved;
+	__u8  private_data[RDMA_MAX_PRIVATE_DATA];
+	__u8  private_data_len;
+	__u8  srq;
+	__u8  responder_resources;
+	__u8  initiator_depth;
+	__u8  flow_control;
+	__u8  retry_count;
+	__u8  rnr_retry_count;
+	__u8  valid;
+};
+
+struct rdma_ucm_ud_param {
+	__u32 qp_num;
+	__u32 qkey;
+	struct ib_uverbs_ah_attr ah_attr;
+	__u8  private_data[RDMA_MAX_PRIVATE_DATA];
+	__u8  private_data_len;
+	__u8  reserved[7];
+};
+
+struct rdma_ucm_connect {
+	struct rdma_ucm_conn_param conn_param;
+	__u32 id;
+	__u32 reserved;
+};
+
+struct rdma_ucm_listen {
+	__u32 id;
+	__u32 backlog;
+};
+
+struct rdma_ucm_accept {
+	__u64 uid;
+	struct rdma_ucm_conn_param conn_param;
+	__u32 id;
+	__u32 reserved;
+};
+
+struct rdma_ucm_reject {
+	__u32 id;
+	__u8  private_data_len;
+	__u8  reserved[3];
+	__u8  private_data[RDMA_MAX_PRIVATE_DATA];
+};
+
+struct rdma_ucm_disconnect {
+	__u32 id;
+};
+
+struct rdma_ucm_init_qp_attr {
+	__u64 response;
+	__u32 id;
+	__u32 qp_state;
+};
+
+struct rdma_ucm_notify {
+	__u32 id;
+	__u32 event;
+};
+
+struct rdma_ucm_join_mcast {
+	__u64 response;		/* rdma_ucm_create_id_resp */
+	__u64 uid;
+	struct sockaddr_in6 addr;
+	__u32 id;
+};
+
+struct rdma_ucm_get_event {
+	__u64 response;
+};
+
+struct rdma_ucm_event_resp {
+	__u64 uid;
+	__u32 id;
+	__u32 event;
+	__u32 status;
+	union {
+		struct rdma_ucm_conn_param conn;
+		struct rdma_ucm_ud_param   ud;
+	} param;
+};
+
+/* Option levels */
+enum {
+	RDMA_OPTION_ID		= 0,
+	RDMA_OPTION_IB		= 1
+};
+
+/* Option details */
+enum {
+	RDMA_OPTION_ID_TOS	 = 0,
+	RDMA_OPTION_ID_REUSEADDR = 1,
+	RDMA_OPTION_IB_PATH	 = 1
+};
+
+struct rdma_ucm_set_option {
+	__u64 optval;
+	__u32 id;
+	__u32 level;
+	__u32 optname;
+	__u32 optlen;
+};
+
+struct rdma_ucm_migrate_id {
+	__u64 response;
+	__u32 id;
+	__u32 fd;
+};
+
+struct rdma_ucm_migrate_resp {
+	__u32 events_reported;
+};
+
+#endif /* RDMA_USER_CM_H */
diff --git a/include/rxrpc/packet.h b/include/rxrpc/packet.h
new file mode 100644
index 00000000..f2902ef7
--- /dev/null
+++ b/include/rxrpc/packet.h
@@ -0,0 +1,214 @@
+/* packet.h: Rx packet layout and definitions
+ *
+ * Copyright (C) 2002, 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_RXRPC_PACKET_H
+#define _LINUX_RXRPC_PACKET_H
+
+typedef u32	rxrpc_seq_t;	/* Rx message sequence number */
+typedef u32	rxrpc_serial_t;	/* Rx message serial number */
+typedef __be32	rxrpc_seq_net_t; /* on-the-wire Rx message sequence number */
+typedef __be32	rxrpc_serial_net_t; /* on-the-wire Rx message serial number */
+
+/*****************************************************************************/
+/*
+ * on-the-wire Rx packet header
+ * - all multibyte fields should be in network byte order
+ */
+struct rxrpc_header {
+	__be32		epoch;		/* client boot timestamp */
+
+	__be32		cid;		/* connection and channel ID */
+#define RXRPC_MAXCALLS		4			/* max active calls per conn */
+#define RXRPC_CHANNELMASK	(RXRPC_MAXCALLS-1)	/* mask for channel ID */
+#define RXRPC_CIDMASK		(~RXRPC_CHANNELMASK)	/* mask for connection ID */
+#define RXRPC_CIDSHIFT		ilog2(RXRPC_MAXCALLS)	/* shift for connection ID */
+#define RXRPC_CID_INC		(1 << RXRPC_CIDSHIFT)	/* connection ID increment */
+
+	__be32		callNumber;	/* call ID (0 for connection-level packets) */
+#define RXRPC_PROCESS_MAXCALLS	(1<<2)	/* maximum number of active calls per conn (power of 2) */
+
+	__be32		seq;		/* sequence number of pkt in call stream */
+	__be32		serial;		/* serial number of pkt sent to network */
+
+	uint8_t		type;		/* packet type */
+#define RXRPC_PACKET_TYPE_DATA		1	/* data */
+#define RXRPC_PACKET_TYPE_ACK		2	/* ACK */
+#define RXRPC_PACKET_TYPE_BUSY		3	/* call reject */
+#define RXRPC_PACKET_TYPE_ABORT		4	/* call/connection abort */
+#define RXRPC_PACKET_TYPE_ACKALL	5	/* ACK all outstanding packets on call */
+#define RXRPC_PACKET_TYPE_CHALLENGE	6	/* connection security challenge (SRVR->CLNT) */
+#define RXRPC_PACKET_TYPE_RESPONSE	7	/* connection secutity response (CLNT->SRVR) */
+#define RXRPC_PACKET_TYPE_DEBUG		8	/* debug info request */
+#define RXRPC_N_PACKET_TYPES		9	/* number of packet types (incl type 0) */
+
+	uint8_t		flags;		/* packet flags */
+#define RXRPC_CLIENT_INITIATED	0x01		/* signifies a packet generated by a client */
+#define RXRPC_REQUEST_ACK	0x02		/* request an unconditional ACK of this packet */
+#define RXRPC_LAST_PACKET	0x04		/* the last packet from this side for this call */
+#define RXRPC_MORE_PACKETS	0x08		/* more packets to come */
+#define RXRPC_JUMBO_PACKET	0x20		/* [DATA] this is a jumbo packet */
+#define RXRPC_SLOW_START_OK	0x20		/* [ACK] slow start supported */
+
+	uint8_t		userStatus;	/* app-layer defined status */
+	uint8_t		securityIndex;	/* security protocol ID */
+	union {
+		__be16	_rsvd;		/* reserved */
+		__be16	cksum;		/* kerberos security checksum */
+	};
+	__be16		serviceId;	/* service ID */
+
+} __packed;
+
+#define __rxrpc_header_off(X) offsetof(struct rxrpc_header,X)
+
+extern const char *rxrpc_pkts[];
+
+/*****************************************************************************/
+/*
+ * jumbo packet secondary header
+ * - can be mapped to read header by:
+ *   - new_serial = serial + 1
+ *   - new_seq = seq + 1
+ *   - new_flags = j_flags
+ *   - new__rsvd = j__rsvd
+ *   - duplicating all other fields
+ */
+struct rxrpc_jumbo_header {
+	uint8_t		flags;		/* packet flags (as per rxrpc_header) */
+	uint8_t		pad;
+	__be16		_rsvd;		/* reserved (used by kerberos security as cksum) */
+};
+
+#define RXRPC_JUMBO_DATALEN	1412	/* non-terminal jumbo packet data length */
+
+/*****************************************************************************/
+/*
+ * on-the-wire Rx ACK packet data payload
+ * - all multibyte fields should be in network byte order
+ */
+struct rxrpc_ackpacket {
+	__be16		bufferSpace;	/* number of packet buffers available */
+	__be16		maxSkew;	/* diff between serno being ACK'd and highest serial no
+					 * received */
+	__be32		firstPacket;	/* sequence no of first ACK'd packet in attached list */
+	__be32		previousPacket;	/* sequence no of previous packet received */
+	__be32		serial;		/* serial no of packet that prompted this ACK */
+
+	uint8_t		reason;		/* reason for ACK */
+#define RXRPC_ACK_REQUESTED		1	/* ACK was requested on packet */
+#define RXRPC_ACK_DUPLICATE		2	/* duplicate packet received */
+#define RXRPC_ACK_OUT_OF_SEQUENCE	3	/* out of sequence packet received */
+#define RXRPC_ACK_EXCEEDS_WINDOW	4	/* packet received beyond end of ACK window */
+#define RXRPC_ACK_NOSPACE		5	/* packet discarded due to lack of buffer space */
+#define RXRPC_ACK_PING			6	/* keep alive ACK */
+#define RXRPC_ACK_PING_RESPONSE		7	/* response to RXRPC_ACK_PING */
+#define RXRPC_ACK_DELAY			8	/* nothing happened since received packet */
+#define RXRPC_ACK_IDLE			9	/* ACK due to fully received ACK window */
+
+	uint8_t		nAcks;		/* number of ACKs */
+#define RXRPC_MAXACKS	255
+
+	uint8_t		acks[0];	/* list of ACK/NAKs */
+#define RXRPC_ACK_TYPE_NACK		0
+#define RXRPC_ACK_TYPE_ACK		1
+
+} __packed;
+
+/*
+ * ACK packets can have a further piece of information tagged on the end
+ */
+struct rxrpc_ackinfo {
+	__be32		rxMTU;		/* maximum Rx MTU size (bytes) [AFS 3.3] */
+	__be32		maxMTU;		/* maximum interface MTU size (bytes) [AFS 3.3] */
+	__be32		rwind;		/* Rx window size (packets) [AFS 3.4] */
+	__be32		jumbo_max;	/* max packets to stick into a jumbo packet [AFS 3.5] */
+};
+
+/*****************************************************************************/
+/*
+ * Kerberos security type-2 challenge packet
+ */
+struct rxkad_challenge {
+	__be32		version;	/* version of this challenge type */
+	__be32		nonce;		/* encrypted random number */
+	__be32		min_level;	/* minimum security level */
+	__be32		__padding;	/* padding to 8-byte boundary */
+} __packed;
+
+/*****************************************************************************/
+/*
+ * Kerberos security type-2 response packet
+ */
+struct rxkad_response {
+	__be32		version;	/* version of this response type */
+	__be32		__pad;
+
+	/* encrypted bit of the response */
+	struct {
+		__be32		epoch;		/* current epoch */
+		__be32		cid;		/* parent connection ID */
+		__be32		checksum;	/* checksum */
+		__be32		securityIndex;	/* security type */
+		__be32		call_id[4];	/* encrypted call IDs */
+		__be32		inc_nonce;	/* challenge nonce + 1 */
+		__be32		level;		/* desired level */
+	} encrypted;
+
+	__be32		kvno;		/* Kerberos key version number */
+	__be32		ticket_len;	/* Kerberos ticket length  */
+} __packed;
+
+/*****************************************************************************/
+/*
+ * RxRPC-level abort codes
+ */
+#define RX_CALL_DEAD		-1	/* call/conn has been inactive and is shut down */
+#define RX_INVALID_OPERATION	-2	/* invalid operation requested / attempted */
+#define RX_CALL_TIMEOUT		-3	/* call timeout exceeded */
+#define RX_EOF			-4	/* unexpected end of data on read op */
+#define RX_PROTOCOL_ERROR	-5	/* low-level protocol error */
+#define RX_USER_ABORT		-6	/* generic user abort */
+#define RX_ADDRINUSE		-7	/* UDP port in use */
+#define RX_DEBUGI_BADTYPE	-8	/* bad debugging packet type */
+
+/*
+ * (un)marshalling abort codes (rxgen)
+ */
+#define	RXGEN_CC_MARSHAL    -450
+#define	RXGEN_CC_UNMARSHAL  -451
+#define	RXGEN_SS_MARSHAL    -452
+#define	RXGEN_SS_UNMARSHAL  -453
+#define	RXGEN_DECODE	    -454
+#define	RXGEN_OPCODE	    -455
+#define	RXGEN_SS_XDRFREE    -456
+#define	RXGEN_CC_XDRFREE    -457
+
+/*
+ * Rx kerberos security abort codes
+ * - unfortunately we have no generalised security abort codes to say things
+ *   like "unsupported security", so we have to use these instead and hope the
+ *   other side understands
+ */
+#define RXKADINCONSISTENCY	19270400	/* security module structure inconsistent */
+#define RXKADPACKETSHORT	19270401	/* packet too short for security challenge */
+#define RXKADLEVELFAIL		19270402	/* security level negotiation failed */
+#define RXKADTICKETLEN		19270403	/* ticket length too short or too long */
+#define RXKADOUTOFSEQUENCE	19270404	/* packet had bad sequence number */
+#define RXKADNOAUTH		19270405	/* caller not authorised */
+#define RXKADBADKEY		19270406	/* illegal key: bad parity or weak */
+#define RXKADBADTICKET		19270407	/* security object was passed a bad ticket */
+#define RXKADUNKNOWNKEY		19270408	/* ticket contained unknown key version number */
+#define RXKADEXPIRED		19270409	/* authentication expired */
+#define RXKADSEALEDINCON	19270410	/* sealed data inconsistent */
+#define RXKADDATALEN		19270411	/* user data too long */
+#define RXKADILLEGALLEVEL	19270412	/* caller not authorised to use encrypted conns */
+
+#endif /* _LINUX_RXRPC_PACKET_H */
diff --git a/include/rxrpc/types.h b/include/rxrpc/types.h
new file mode 100644
index 00000000..30d48f6d
--- /dev/null
+++ b/include/rxrpc/types.h
@@ -0,0 +1,41 @@
+/* types.h: Rx types
+ *
+ * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_RXRPC_TYPES_H
+#define _LINUX_RXRPC_TYPES_H
+
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/socket.h>
+#include <linux/in.h>
+#include <linux/spinlock.h>
+#include <linux/atomic.h>
+
+typedef uint32_t	rxrpc_seq_t;	/* Rx message sequence number */
+typedef uint32_t	rxrpc_serial_t;	/* Rx message serial number */
+typedef __be32	rxrpc_seq_net_t; /* on-the-wire Rx message sequence number */
+typedef __be32	rxrpc_serial_net_t; /* on-the-wire Rx message serial number */
+
+struct rxrpc_call;
+struct rxrpc_connection;
+struct rxrpc_header;
+struct rxrpc_message;
+struct rxrpc_operation;
+struct rxrpc_peer;
+struct rxrpc_service;
+typedef struct rxrpc_timer rxrpc_timer_t;
+struct rxrpc_transport;
+
+typedef void (*rxrpc_call_attn_func_t)(struct rxrpc_call *call);
+typedef void (*rxrpc_call_error_func_t)(struct rxrpc_call *call);
+typedef void (*rxrpc_call_aemap_func_t)(struct rxrpc_call *call);
+
+#endif /* _LINUX_RXRPC_TYPES_H */
diff --git a/include/scsi/Kbuild b/include/scsi/Kbuild
new file mode 100644
index 00000000..f2b94918
--- /dev/null
+++ b/include/scsi/Kbuild
@@ -0,0 +1,4 @@
+header-y += scsi_netlink.h
+header-y += scsi_netlink_fc.h
+header-y += scsi_bsg_fc.h
+header-y += fc/
diff --git a/include/scsi/fc/Kbuild b/include/scsi/fc/Kbuild
new file mode 100644
index 00000000..56603813
--- /dev/null
+++ b/include/scsi/fc/Kbuild
@@ -0,0 +1,4 @@
+header-y += fc_els.h
+header-y += fc_fs.h
+header-y += fc_gs.h
+header-y += fc_ns.h
diff --git a/include/scsi/fc/fc_els.h b/include/scsi/fc/fc_els.h
new file mode 100644
index 00000000..481abbd4
--- /dev/null
+++ b/include/scsi/fc/fc_els.h
@@ -0,0 +1,831 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_ELS_H_
+#define	_FC_ELS_H_
+
+#include <linux/types.h>
+
+/*
+ * Fibre Channel Switch - Enhanced Link Services definitions.
+ * From T11 FC-LS Rev 1.2 June 7, 2005.
+ */
+
+/*
+ * ELS Command codes - byte 0 of the frame payload
+ */
+enum fc_els_cmd {
+	ELS_LS_RJT =	0x01,	/* ESL reject */
+	ELS_LS_ACC =	0x02,	/* ESL Accept */
+	ELS_PLOGI =	0x03,	/* N_Port login */
+	ELS_FLOGI =	0x04,	/* F_Port login */
+	ELS_LOGO =	0x05,	/* Logout */
+	ELS_ABTX =	0x06,	/* Abort exchange - obsolete */
+	ELS_RCS =	0x07,	/* read connection status */
+	ELS_RES =	0x08,	/* read exchange status block */
+	ELS_RSS =	0x09,	/* read sequence status block */
+	ELS_RSI =	0x0a,	/* read sequence initiative */
+	ELS_ESTS =	0x0b,	/* establish streaming */
+	ELS_ESTC =	0x0c,	/* estimate credit */
+	ELS_ADVC =	0x0d,	/* advise credit */
+	ELS_RTV =	0x0e,	/* read timeout value */
+	ELS_RLS =	0x0f,	/* read link error status block */
+	ELS_ECHO =	0x10,	/* echo */
+	ELS_TEST =	0x11,	/* test */
+	ELS_RRQ =	0x12,	/* reinstate recovery qualifier */
+	ELS_REC =	0x13,	/* read exchange concise */
+	ELS_SRR =	0x14,	/* sequence retransmission request */
+	ELS_PRLI =	0x20,	/* process login */
+	ELS_PRLO =	0x21,	/* process logout */
+	ELS_SCN =	0x22,	/* state change notification */
+	ELS_TPLS =	0x23,	/* test process login state */
+	ELS_TPRLO =	0x24,	/* third party process logout */
+	ELS_LCLM =	0x25,	/* login control list mgmt (obs) */
+	ELS_GAID =	0x30,	/* get alias_ID */
+	ELS_FACT =	0x31,	/* fabric activate alias_id */
+	ELS_FDACDT =	0x32,	/* fabric deactivate alias_id */
+	ELS_NACT =	0x33,	/* N-port activate alias_id */
+	ELS_NDACT =	0x34,	/* N-port deactivate alias_id */
+	ELS_QOSR =	0x40,	/* quality of service request */
+	ELS_RVCS =	0x41,	/* read virtual circuit status */
+	ELS_PDISC =	0x50,	/* discover N_port service params */
+	ELS_FDISC =	0x51,	/* discover F_port service params */
+	ELS_ADISC =	0x52,	/* discover address */
+	ELS_RNC =	0x53,	/* report node cap (obs) */
+	ELS_FARP_REQ =	0x54,	/* FC ARP request */
+	ELS_FARP_REPL =	0x55,	/* FC ARP reply */
+	ELS_RPS =	0x56,	/* read port status block */
+	ELS_RPL =	0x57,	/* read port list */
+	ELS_RPBC =	0x58,	/* read port buffer condition */
+	ELS_FAN =	0x60,	/* fabric address notification */
+	ELS_RSCN =	0x61,	/* registered state change notification */
+	ELS_SCR =	0x62,	/* state change registration */
+	ELS_RNFT =	0x63,	/* report node FC-4 types */
+	ELS_CSR =	0x68,	/* clock synch. request */
+	ELS_CSU =	0x69,	/* clock synch. update */
+	ELS_LINIT =	0x70,	/* loop initialize */
+	ELS_LSTS =	0x72,	/* loop status */
+	ELS_RNID =	0x78,	/* request node ID data */
+	ELS_RLIR =	0x79,	/* registered link incident report */
+	ELS_LIRR =	0x7a,	/* link incident record registration */
+	ELS_SRL =	0x7b,	/* scan remote loop */
+	ELS_SBRP =	0x7c,	/* set bit-error reporting params */
+	ELS_RPSC =	0x7d,	/* report speed capabilities */
+	ELS_QSA =	0x7e,	/* query security attributes */
+	ELS_EVFP =	0x7f,	/* exchange virt. fabrics params */
+	ELS_LKA =	0x80,	/* link keep-alive */
+	ELS_AUTH_ELS =	0x90,	/* authentication ELS */
+};
+
+/*
+ * Initializer useful for decoding table.
+ * Please keep this in sync with the above definitions.
+ */
+#define	FC_ELS_CMDS_INIT {			\
+	[ELS_LS_RJT] =	"LS_RJT",		\
+	[ELS_LS_ACC] =	"LS_ACC",		\
+	[ELS_PLOGI] =	"PLOGI",		\
+	[ELS_FLOGI] =	"FLOGI",		\
+	[ELS_LOGO] =	"LOGO",			\
+	[ELS_ABTX] =	"ABTX",			\
+	[ELS_RCS] =	"RCS",			\
+	[ELS_RES] =	"RES",			\
+	[ELS_RSS] =	"RSS",			\
+	[ELS_RSI] =	"RSI",			\
+	[ELS_ESTS] =	"ESTS",			\
+	[ELS_ESTC] =	"ESTC",			\
+	[ELS_ADVC] =	"ADVC",			\
+	[ELS_RTV] =	"RTV",			\
+	[ELS_RLS] =	"RLS",			\
+	[ELS_ECHO] =	"ECHO",			\
+	[ELS_TEST] =	"TEST",			\
+	[ELS_RRQ] =	"RRQ",			\
+	[ELS_REC] =	"REC",			\
+	[ELS_SRR] =	"SRR",			\
+	[ELS_PRLI] =	"PRLI",			\
+	[ELS_PRLO] =	"PRLO",			\
+	[ELS_SCN] =	"SCN",			\
+	[ELS_TPLS] =	"TPLS",			\
+	[ELS_TPRLO] =	"TPRLO",		\
+	[ELS_LCLM] =	"LCLM",			\
+	[ELS_GAID] =	"GAID",			\
+	[ELS_FACT] =	"FACT",			\
+	[ELS_FDACDT] =	"FDACDT",		\
+	[ELS_NACT] =	"NACT",			\
+	[ELS_NDACT] =	"NDACT",		\
+	[ELS_QOSR] =	"QOSR",			\
+	[ELS_RVCS] =	"RVCS",			\
+	[ELS_PDISC] =	"PDISC",		\
+	[ELS_FDISC] =	"FDISC",		\
+	[ELS_ADISC] =	"ADISC",		\
+	[ELS_RNC] =	"RNC",			\
+	[ELS_FARP_REQ] = "FARP_REQ",		\
+	[ELS_FARP_REPL] =  "FARP_REPL",		\
+	[ELS_RPS] =	"RPS",			\
+	[ELS_RPL] =	"RPL",			\
+	[ELS_RPBC] =	"RPBC",			\
+	[ELS_FAN] =	"FAN",			\
+	[ELS_RSCN] =	"RSCN",			\
+	[ELS_SCR] =	"SCR",			\
+	[ELS_RNFT] =	"RNFT",			\
+	[ELS_CSR] =	"CSR",			\
+	[ELS_CSU] =	"CSU",			\
+	[ELS_LINIT] =	"LINIT",		\
+	[ELS_LSTS] =	"LSTS",			\
+	[ELS_RNID] =	"RNID",			\
+	[ELS_RLIR] =	"RLIR",			\
+	[ELS_LIRR] =	"LIRR",			\
+	[ELS_SRL] =	"SRL",			\
+	[ELS_SBRP] =	"SBRP",			\
+	[ELS_RPSC] =	"RPSC",			\
+	[ELS_QSA] =	"QSA",			\
+	[ELS_EVFP] =	"EVFP",			\
+	[ELS_LKA] =	"LKA",			\
+	[ELS_AUTH_ELS] = "AUTH_ELS",		\
+}
+
+/*
+ * LS_ACC payload.
+ */
+struct fc_els_ls_acc {
+	__u8          la_cmd;		/* command code ELS_LS_ACC */
+	__u8          la_resv[3];	/* reserved */
+};
+
+/*
+ * ELS reject payload.
+ */
+struct fc_els_ls_rjt {
+	__u8	er_cmd;		/* command code ELS_LS_RJT */
+	__u8	er_resv[4];	/* reserved must be zero */
+	__u8	er_reason;	/* reason (enum fc_els_rjt_reason below) */
+	__u8	er_explan;	/* explanation (enum fc_els_rjt_explan below) */
+	__u8	er_vendor;	/* vendor specific code */
+};
+
+/*
+ * ELS reject reason codes (er_reason).
+ */
+enum fc_els_rjt_reason {
+	ELS_RJT_NONE =		0,	/* no reject - not to be sent */
+	ELS_RJT_INVAL =		0x01,	/* invalid ELS command code */
+	ELS_RJT_LOGIC =		0x03,	/* logical error */
+	ELS_RJT_BUSY =		0x05,	/* logical busy */
+	ELS_RJT_PROT =		0x07,	/* protocol error */
+	ELS_RJT_UNAB =		0x09,	/* unable to perform command request */
+	ELS_RJT_UNSUP =		0x0b,	/* command not supported */
+	ELS_RJT_INPROG =	0x0e,	/* command already in progress */
+	ELS_RJT_FIP =		0x20,	/* FIP error */
+	ELS_RJT_VENDOR =	0xff,	/* vendor specific error */
+};
+
+
+/*
+ * reason code explanation (er_explan).
+ */
+enum fc_els_rjt_explan {
+	ELS_EXPL_NONE =		0x00,	/* No additional explanation */
+	ELS_EXPL_SPP_OPT_ERR =	0x01,	/* service parameter error - options */
+	ELS_EXPL_SPP_ICTL_ERR =	0x03,	/* service parm error - initiator ctl */
+	ELS_EXPL_AH =		0x11,	/* invalid association header */
+	ELS_EXPL_AH_REQ =	0x13,	/* association_header required */
+	ELS_EXPL_SID =		0x15,	/* invalid originator S_ID */
+	ELS_EXPL_OXID_RXID =	0x17,	/* invalid OX_ID-RX_ID combination */
+	ELS_EXPL_INPROG =	0x19,	/* Request already in progress */
+	ELS_EXPL_PLOGI_REQD =	0x1e,	/* N_Port login required */
+	ELS_EXPL_INSUF_RES =	0x29,	/* insufficient resources */
+	ELS_EXPL_UNAB_DATA =	0x2a,	/* unable to supply requested data */
+	ELS_EXPL_UNSUPR =	0x2c,	/* Request not supported */
+	ELS_EXPL_INV_LEN =	0x2d,	/* Invalid payload length */
+	ELS_EXPL_NOT_NEIGHBOR = 0x62,	/* VN2VN_Port not in neighbor set */
+	/* TBD - above definitions incomplete */
+};
+
+/*
+ * Common service parameters (N ports).
+ */
+struct fc_els_csp {
+	__u8		sp_hi_ver;	/* highest version supported (obs.) */
+	__u8		sp_lo_ver;	/* highest version supported (obs.) */
+	__be16		sp_bb_cred;	/* buffer-to-buffer credits */
+	__be16		sp_features;	/* common feature flags */
+	__be16		sp_bb_data;	/* b-b state number and data field sz */
+	union {
+		struct {
+			__be16	_sp_tot_seq; /* total concurrent sequences */
+			__be16	_sp_rel_off; /* rel. offset by info cat */
+		} sp_plogi;
+		struct {
+			__be32	_sp_r_a_tov; /* resource alloc. timeout msec */
+		} sp_flogi_acc;
+	} sp_u;
+	__be32		sp_e_d_tov;	/* error detect timeout value */
+};
+#define	sp_tot_seq	sp_u.sp_plogi._sp_tot_seq
+#define	sp_rel_off	sp_u.sp_plogi._sp_rel_off
+#define	sp_r_a_tov	sp_u.sp_flogi_acc._sp_r_a_tov
+
+#define	FC_SP_BB_DATA_MASK 0xfff /* mask for data field size in sp_bb_data */
+
+/*
+ * Minimum and maximum values for max data field size in service parameters.
+ */
+#define	FC_SP_MIN_MAX_PAYLOAD	FC_MIN_MAX_PAYLOAD
+#define	FC_SP_MAX_MAX_PAYLOAD	FC_MAX_PAYLOAD
+
+/*
+ * sp_features
+ */
+#define	FC_SP_FT_NPIV	0x8000	/* multiple N_Port_ID support (FLOGI) */
+#define	FC_SP_FT_CIRO	0x8000	/* continuously increasing rel off (PLOGI) */
+#define	FC_SP_FT_CLAD	0x8000	/* clean address (in FLOGI LS_ACC) */
+#define	FC_SP_FT_RAND	0x4000	/* random relative offset */
+#define	FC_SP_FT_VAL	0x2000	/* valid vendor version level */
+#define	FC_SP_FT_NPIV_ACC	0x2000	/* NPIV assignment (FLOGI LS_ACC) */
+#define	FC_SP_FT_FPORT	0x1000	/* F port (1) vs. N port (0) */
+#define	FC_SP_FT_ABB	0x0800	/* alternate BB_credit management */
+#define	FC_SP_FT_EDTR	0x0400	/* E_D_TOV Resolution is nanoseconds */
+#define	FC_SP_FT_MCAST	0x0200	/* multicast */
+#define	FC_SP_FT_BCAST	0x0100	/* broadcast */
+#define	FC_SP_FT_HUNT	0x0080	/* hunt group */
+#define	FC_SP_FT_SIMP	0x0040	/* dedicated simplex */
+#define	FC_SP_FT_SEC	0x0020	/* reserved for security */
+#define	FC_SP_FT_CSYN	0x0010	/* clock synch. supported */
+#define	FC_SP_FT_RTTOV	0x0008	/* R_T_TOV value 100 uS, else 100 mS */
+#define	FC_SP_FT_HALF	0x0004	/* dynamic half duplex */
+#define	FC_SP_FT_SEQC	0x0002	/* SEQ_CNT */
+#define	FC_SP_FT_PAYL	0x0001	/* FLOGI payload length 256, else 116 */
+
+/*
+ * Class-specific service parameters.
+ */
+struct fc_els_cssp {
+	__be16		cp_class;	/* class flags */
+	__be16		cp_init;	/* initiator flags */
+	__be16		cp_recip;	/* recipient flags */
+	__be16		cp_rdfs;	/* receive data field size */
+	__be16		cp_con_seq;	/* concurrent sequences */
+	__be16		cp_ee_cred;	/* N-port end-to-end credit */
+	__u8		cp_resv1;	/* reserved */
+	__u8		cp_open_seq;	/* open sequences per exchange */
+	__u8		_cp_resv2[2];	/* reserved */
+};
+
+/*
+ * cp_class flags.
+ */
+#define	FC_CPC_VALID	0x8000		/* class valid */
+#define	FC_CPC_IMIX	0x4000		/* intermix mode */
+#define	FC_CPC_SEQ	0x0800		/* sequential delivery */
+#define	FC_CPC_CAMP	0x0200		/* camp-on */
+#define	FC_CPC_PRI	0x0080		/* priority */
+
+/*
+ * cp_init flags.
+ * (TBD: not all flags defined here).
+ */
+#define	FC_CPI_CSYN	0x0010		/* clock synch. capable */
+
+/*
+ * cp_recip flags.
+ */
+#define	FC_CPR_CSYN	0x0008		/* clock synch. capable */
+
+/*
+ * NFC_ELS_FLOGI: Fabric login request.
+ * NFC_ELS_PLOGI: Port login request (same format).
+ */
+struct fc_els_flogi {
+	__u8		fl_cmd;		/* command */
+	__u8		_fl_resvd[3];	/* must be zero */
+	struct fc_els_csp fl_csp;	/* common service parameters */
+	__be64		fl_wwpn;	/* port name */
+	__be64		fl_wwnn;	/* node name */
+	struct fc_els_cssp fl_cssp[4];	/* class 1-4 service parameters */
+	__u8		fl_vend[16];	/* vendor version level */
+} __attribute__((__packed__));
+
+/*
+ * Process login service parameter page.
+ */
+struct fc_els_spp {
+	__u8		spp_type;	/* type code or common service params */
+	__u8		spp_type_ext;	/* type code extension */
+	__u8		spp_flags;
+	__u8		_spp_resvd;
+	__be32		spp_orig_pa;	/* originator process associator */
+	__be32		spp_resp_pa;	/* responder process associator */
+	__be32		spp_params;	/* service parameters */
+};
+
+/*
+ * spp_flags.
+ */
+#define	FC_SPP_OPA_VAL	    0x80	/* originator proc. assoc. valid */
+#define	FC_SPP_RPA_VAL	    0x40	/* responder proc. assoc. valid */
+#define	FC_SPP_EST_IMG_PAIR 0x20	/* establish image pair */
+#define	FC_SPP_RESP_MASK    0x0f	/* mask for response code (below) */
+
+/*
+ * SPP response code in spp_flags - lower 4 bits.
+ */
+enum fc_els_spp_resp {
+	FC_SPP_RESP_ACK	=	1,	/* request executed */
+	FC_SPP_RESP_RES =	2,	/* unable due to lack of resources */
+	FC_SPP_RESP_INIT =	3,	/* initialization not complete */
+	FC_SPP_RESP_NO_PA = 	4,	/* unknown process associator */
+	FC_SPP_RESP_CONF = 	5,	/* configuration precludes image pair */
+	FC_SPP_RESP_COND = 	6,	/* request completed conditionally */
+	FC_SPP_RESP_MULT = 	7,	/* unable to handle multiple SPPs */
+	FC_SPP_RESP_INVL = 	8,	/* SPP is invalid */
+};
+
+/*
+ * ELS_RRQ - Reinstate Recovery Qualifier
+ */
+struct fc_els_rrq {
+	__u8		rrq_cmd;	/* command (0x12) */
+	__u8		rrq_zero[3];	/* specified as zero - part of cmd */
+	__u8		rrq_resvd;	/* reserved */
+	__u8		rrq_s_id[3];	/* originator FID */
+	__be16		rrq_ox_id;	/* originator exchange ID */
+	__be16		rrq_rx_id;	/* responders exchange ID */
+};
+
+/*
+ * ELS_REC - Read exchange concise.
+ */
+struct fc_els_rec {
+	__u8		rec_cmd;	/* command (0x13) */
+	__u8		rec_zero[3];	/* specified as zero - part of cmd */
+	__u8		rec_resvd;	/* reserved */
+	__u8		rec_s_id[3];	/* originator FID */
+	__be16		rec_ox_id;	/* originator exchange ID */
+	__be16		rec_rx_id;	/* responders exchange ID */
+};
+
+/*
+ * ELS_REC LS_ACC payload.
+ */
+struct fc_els_rec_acc {
+	__u8		reca_cmd;	/* accept (0x02) */
+	__u8		reca_zero[3];	/* specified as zero - part of cmd */
+	__be16		reca_ox_id;	/* originator exchange ID */
+	__be16		reca_rx_id;	/* responders exchange ID */
+	__u8		reca_resvd1;	/* reserved */
+	__u8		reca_ofid[3];	/* originator FID */
+	__u8		reca_resvd2;	/* reserved */
+	__u8		reca_rfid[3];	/* responder FID */
+	__be32		reca_fc4value;	/* FC4 value */
+	__be32		reca_e_stat;	/* ESB (exchange status block) status */
+};
+
+/*
+ * ELS_PRLI - Process login request and response.
+ */
+struct fc_els_prli {
+	__u8		prli_cmd;	/* command */
+	__u8		prli_spp_len;	/* length of each serv. parm. page */
+	__be16		prli_len;	/* length of entire payload */
+	/* service parameter pages follow */
+};
+
+/*
+ * ELS_PRLO - Process logout request and response.
+ */
+struct fc_els_prlo {
+	__u8            prlo_cmd;       /* command */
+	__u8            prlo_obs;       /* obsolete, but shall be set to 10h */
+	__be16          prlo_len;       /* payload length */
+};
+
+/*
+ * ELS_ADISC payload
+ */
+struct fc_els_adisc {
+	__u8		adisc_cmd;
+	__u8		adisc_resv[3];
+	__u8            adisc_resv1;
+	__u8            adisc_hard_addr[3];
+	__be64          adisc_wwpn;
+	__be64          adisc_wwnn;
+	__u8            adisc_resv2;
+	__u8            adisc_port_id[3];
+} __attribute__((__packed__));
+
+/*
+ * ELS_LOGO - process or fabric logout.
+ */
+struct fc_els_logo {
+	__u8		fl_cmd;		/* command code */
+	__u8		fl_zero[3];	/* specified as zero - part of cmd */
+	__u8		fl_resvd;	/* reserved */
+	__u8		fl_n_port_id[3];/* N port ID */
+	__be64		fl_n_port_wwn;	/* port name */
+};
+
+/*
+ * ELS_RTV - read timeout value.
+ */
+struct fc_els_rtv {
+	__u8		rtv_cmd;	/* command code 0x0e */
+	__u8		rtv_zero[3];	/* specified as zero - part of cmd */
+};
+
+/*
+ * LS_ACC for ELS_RTV - read timeout value.
+ */
+struct fc_els_rtv_acc {
+	__u8		rtv_cmd;	/* command code 0x02 */
+	__u8		rtv_zero[3];	/* specified as zero - part of cmd */
+	__be32		rtv_r_a_tov;	/* resource allocation timeout value */
+	__be32		rtv_e_d_tov;	/* error detection timeout value */
+	__be32		rtv_toq;	/* timeout qualifier (see below) */
+};
+
+/*
+ * rtv_toq bits.
+ */
+#define	FC_ELS_RTV_EDRES (1 << 26)	/* E_D_TOV resolution is nS else mS */
+#define	FC_ELS_RTV_RTTOV (1 << 19)	/* R_T_TOV is 100 uS else 100 mS */
+
+/*
+ * ELS_SCR - state change registration payload.
+ */
+struct fc_els_scr {
+	__u8		scr_cmd;	/* command code */
+	__u8		scr_resv[6];	/* reserved */
+	__u8		scr_reg_func;	/* registration function (see below) */
+};
+
+enum fc_els_scr_func {
+	ELS_SCRF_FAB =	1,	/* fabric-detected registration */
+	ELS_SCRF_NPORT = 2,	/* Nx_Port-detected registration */
+	ELS_SCRF_FULL =	3,	/* full registration */
+	ELS_SCRF_CLEAR = 255,	/* remove any current registrations */
+};
+
+/*
+ * ELS_RSCN - registered state change notification payload.
+ */
+struct fc_els_rscn {
+	__u8		rscn_cmd;	/* RSCN opcode (0x61) */
+	__u8		rscn_page_len;	/* page length (4) */
+	__be16		rscn_plen;	/* payload length including this word */
+
+	/* followed by 4-byte generic affected Port_ID pages */
+};
+
+struct fc_els_rscn_page {
+	__u8		rscn_page_flags; /* event and address format */
+	__u8		rscn_fid[3];	/* fabric ID */
+};
+
+#define	ELS_RSCN_EV_QUAL_BIT	2	/* shift count for event qualifier */
+#define	ELS_RSCN_EV_QUAL_MASK	0xf	/* mask for event qualifier */
+#define	ELS_RSCN_ADDR_FMT_BIT	0	/* shift count for address format */
+#define	ELS_RSCN_ADDR_FMT_MASK	0x3	/* mask for address format */
+
+enum fc_els_rscn_ev_qual {
+	ELS_EV_QUAL_NONE = 0,		/* unspecified */
+	ELS_EV_QUAL_NS_OBJ = 1,		/* changed name server object */
+	ELS_EV_QUAL_PORT_ATTR = 2,	/* changed port attribute */
+	ELS_EV_QUAL_SERV_OBJ = 3,	/* changed service object */
+	ELS_EV_QUAL_SW_CONFIG = 4,	/* changed switch configuration */
+	ELS_EV_QUAL_REM_OBJ = 5,	/* removed object */
+};
+
+enum fc_els_rscn_addr_fmt {
+	ELS_ADDR_FMT_PORT = 0,	/* rscn_fid is a port address */
+	ELS_ADDR_FMT_AREA = 1,	/* rscn_fid is a area address */
+	ELS_ADDR_FMT_DOM = 2,	/* rscn_fid is a domain address */
+	ELS_ADDR_FMT_FAB = 3,	/* anything on fabric may have changed */
+};
+
+/*
+ * ELS_RNID - request Node ID.
+ */
+struct fc_els_rnid {
+	__u8		rnid_cmd;	/* RNID opcode (0x78) */
+	__u8		rnid_resv[3];	/* reserved */
+	__u8		rnid_fmt;	/* data format */
+	__u8		rnid_resv2[3];	/* reserved */
+};
+
+/*
+ * Node Identification Data formats (rnid_fmt)
+ */
+enum fc_els_rnid_fmt {
+	ELS_RNIDF_NONE = 0,		/* no specific identification data */
+	ELS_RNIDF_GEN = 0xdf,		/* general topology discovery format */
+};
+
+/*
+ * ELS_RNID response.
+ */
+struct fc_els_rnid_resp {
+	__u8		rnid_cmd;	/* response code (LS_ACC) */
+	__u8		rnid_resv[3];	/* reserved */
+	__u8		rnid_fmt;	/* data format */
+	__u8		rnid_cid_len;	/* common ID data length */
+	__u8		rnid_resv2;	/* reserved */
+	__u8		rnid_sid_len;	/* specific ID data length */
+};
+
+struct fc_els_rnid_cid {
+	__be64		rnid_wwpn;	/* N port name */
+	__be64		rnid_wwnn;	/* node name */
+};
+
+struct fc_els_rnid_gen {
+	__u8		rnid_vend_id[16]; /* vendor-unique ID */
+	__be32		rnid_atype;	/* associated type (see below) */
+	__be32		rnid_phys_port;	/* physical port number */
+	__be32		rnid_att_nodes;	/* number of attached nodes */
+	__u8		rnid_node_mgmt;	/* node management (see below) */
+	__u8		rnid_ip_ver;	/* IP version (see below) */
+	__be16		rnid_prot_port;	/* UDP / TCP port number */
+	__be32		rnid_ip_addr[4]; /* IP address */
+	__u8		rnid_resvd[2];	/* reserved */
+	__be16		rnid_vend_spec;	/* vendor-specific field */
+};
+
+enum fc_els_rnid_atype {
+	ELS_RNIDA_UNK =		0x01,	/* unknown */
+	ELS_RNIDA_OTHER =	0x02,	/* none of the following */
+	ELS_RNIDA_HUB =		0x03,
+	ELS_RNIDA_SWITCH =	0x04,
+	ELS_RNIDA_GATEWAY =	0x05,
+	ELS_RNIDA_CONV =	0x06,   /* Obsolete, do not use this value */
+	ELS_RNIDA_HBA =	        0x07,   /* Obsolete, do not use this value */
+	ELS_RNIDA_PROXY =       0x08,   /* Obsolete, do not use this value */
+	ELS_RNIDA_STORAGE =	0x09,
+	ELS_RNIDA_HOST =	0x0a,
+	ELS_RNIDA_SUBSYS =	0x0b,	/* storage subsystem (e.g., RAID) */
+	ELS_RNIDA_ACCESS =	0x0e,	/* access device (e.g. media changer) */
+	ELS_RNIDA_NAS =		0x11,	/* NAS server */
+	ELS_RNIDA_BRIDGE =	0x12,	/* bridge */
+	ELS_RNIDA_VIRT =	0x13,	/* virtualization device */
+	ELS_RNIDA_MF =		0xff,	/* multifunction device (bits below) */
+	ELS_RNIDA_MF_HUB =	1UL << 31, 	/* hub */
+	ELS_RNIDA_MF_SW =	1UL << 30, 	/* switch */
+	ELS_RNIDA_MF_GW =	1UL << 29,	/* gateway */
+	ELS_RNIDA_MF_ST =	1UL << 28,	/* storage */
+	ELS_RNIDA_MF_HOST =	1UL << 27,	/* host */
+	ELS_RNIDA_MF_SUB =	1UL << 26,	/* storage subsystem */
+	ELS_RNIDA_MF_ACC =	1UL << 25,	/* storage access dev */
+	ELS_RNIDA_MF_WDM =	1UL << 24,	/* wavelength division mux */
+	ELS_RNIDA_MF_NAS =	1UL << 23,	/* NAS server */
+	ELS_RNIDA_MF_BR =	1UL << 22,	/* bridge */
+	ELS_RNIDA_MF_VIRT =	1UL << 21,	/* virtualization device */
+};
+
+enum fc_els_rnid_mgmt {
+	ELS_RNIDM_SNMP =	0,
+	ELS_RNIDM_TELNET =	1,
+	ELS_RNIDM_HTTP =	2,
+	ELS_RNIDM_HTTPS =	3,
+	ELS_RNIDM_XML =		4,	/* HTTP + XML */
+};
+
+enum fc_els_rnid_ipver {
+	ELS_RNIDIP_NONE =	0,	/* no IP support or node mgmt. */
+	ELS_RNIDIP_V4 =		1,	/* IPv4 */
+	ELS_RNIDIP_V6 =		2,	/* IPv6 */
+};
+
+/*
+ * ELS RPL - Read Port List.
+ */
+struct fc_els_rpl {
+	__u8		rpl_cmd;	/* command */
+	__u8		rpl_resv[5];	/* reserved - must be zero */
+	__be16		rpl_max_size;	/* maximum response size or zero */
+	__u8		rpl_resv1;	/* reserved - must be zero */
+	__u8		rpl_index[3];	/* starting index */
+};
+
+/*
+ * Port number block in RPL response.
+ */
+struct fc_els_pnb {
+	__be32		pnb_phys_pn;	/* physical port number */
+	__u8		pnb_resv;	/* reserved */
+	__u8		pnb_port_id[3];	/* port ID */
+	__be64		pnb_wwpn;	/* port name */
+};
+
+/*
+ * RPL LS_ACC response.
+ */
+struct fc_els_rpl_resp {
+	__u8		rpl_cmd;	/* ELS_LS_ACC */
+	__u8		rpl_resv1;	/* reserved - must be zero */
+	__be16		rpl_plen;	/* payload length */
+	__u8		rpl_resv2;	/* reserved - must be zero */
+	__u8		rpl_llen[3];	/* list length */
+	__u8		rpl_resv3;	/* reserved - must be zero */
+	__u8		rpl_index[3];	/* starting index */
+	struct fc_els_pnb rpl_pnb[1];	/* variable number of PNBs */
+};
+
+/*
+ * Link Error Status Block.
+ */
+struct fc_els_lesb {
+	__be32		lesb_link_fail;	/* link failure count */
+	__be32		lesb_sync_loss;	/* loss of synchronization count */
+	__be32		lesb_sig_loss;	/* loss of signal count */
+	__be32		lesb_prim_err;	/* primitive sequence error count */
+	__be32		lesb_inv_word;	/* invalid transmission word count */
+	__be32		lesb_inv_crc;	/* invalid CRC count */
+};
+
+/*
+ * ELS RPS - Read Port Status Block request.
+ */
+struct fc_els_rps {
+	__u8		rps_cmd;	/* command */
+	__u8		rps_resv[2];	/* reserved - must be zero */
+	__u8		rps_flag;	/* flag - see below */
+	__be64		rps_port_spec;	/* port selection */
+};
+
+enum fc_els_rps_flag {
+	FC_ELS_RPS_DID =	0x00,	/* port identified by D_ID of req. */
+	FC_ELS_RPS_PPN =	0x01,	/* port_spec is physical port number */
+	FC_ELS_RPS_WWPN =	0x02,	/* port_spec is port WWN */
+};
+
+/*
+ * ELS RPS LS_ACC response.
+ */
+struct fc_els_rps_resp {
+	__u8		rps_cmd;	/* command - LS_ACC */
+	__u8		rps_resv[2];	/* reserved - must be zero */
+	__u8		rps_flag;	/* flag - see below */
+	__u8		rps_resv2[2];	/* reserved */
+	__be16		rps_status;	/* port status - see below */
+	struct fc_els_lesb rps_lesb;	/* link error status block */
+};
+
+enum fc_els_rps_resp_flag {
+	FC_ELS_RPS_LPEV =	0x01,	/* L_port extension valid */
+};
+
+enum fc_els_rps_resp_status {
+	FC_ELS_RPS_PTP =	1 << 5,	/* point-to-point connection */
+	FC_ELS_RPS_LOOP =	1 << 4,	/* loop mode */
+	FC_ELS_RPS_FAB =	1 << 3,	/* fabric present */
+	FC_ELS_RPS_NO_SIG =	1 << 2,	/* loss of signal */
+	FC_ELS_RPS_NO_SYNC =	1 << 1,	/* loss of synchronization */
+	FC_ELS_RPS_RESET =	1 << 0,	/* in link reset protocol */
+};
+
+/*
+ * ELS LIRR - Link Incident Record Registration request.
+ */
+struct fc_els_lirr {
+	__u8		lirr_cmd;	/* command */
+	__u8		lirr_resv[3];	/* reserved - must be zero */
+	__u8		lirr_func;	/* registration function */
+	__u8		lirr_fmt;	/* FC-4 type of RLIR requested */
+	__u8		lirr_resv2[2];	/* reserved - must be zero */
+};
+
+enum fc_els_lirr_func {
+	ELS_LIRR_SET_COND = 	0x01,	/* set - conditionally receive */
+	ELS_LIRR_SET_UNCOND = 	0x02,	/* set - unconditionally receive */
+	ELS_LIRR_CLEAR = 	0xff	/* clear registration */
+};
+
+/*
+ * ELS SRL - Scan Remote Loop request.
+ */
+struct fc_els_srl {
+	__u8		srl_cmd;	/* command */
+	__u8		srl_resv[3];	/* reserved - must be zero */
+	__u8		srl_flag;	/* flag - see below */
+	__u8		srl_flag_param[3];	/* flag parameter */
+};
+
+enum fc_els_srl_flag {
+	FC_ELS_SRL_ALL =	0x00,	/* scan all FL ports */
+	FC_ELS_SRL_ONE =	0x01,	/* scan specified loop */
+	FC_ELS_SRL_EN_PER =	0x02,	/* enable periodic scanning (param) */
+	FC_ELS_SRL_DIS_PER =	0x03,	/* disable periodic scanning */
+};
+
+/*
+ * ELS RLS - Read Link Error Status Block request.
+ */
+struct fc_els_rls {
+	__u8		rls_cmd;	/* command */
+	__u8		rls_resv[4];	/* reserved - must be zero */
+	__u8		rls_port_id[3];	/* port ID */
+};
+
+/*
+ * ELS RLS LS_ACC Response.
+ */
+struct fc_els_rls_resp {
+	__u8		rls_cmd;	/* ELS_LS_ACC */
+	__u8		rls_resv[3];	/* reserved - must be zero */
+	struct fc_els_lesb rls_lesb;	/* link error status block */
+};
+
+/*
+ * ELS RLIR - Registered Link Incident Report.
+ * This is followed by the CLIR and the CLID, described below.
+ */
+struct fc_els_rlir {
+	__u8		rlir_cmd;	/* command */
+	__u8		rlir_resv[3];	/* reserved - must be zero */
+	__u8		rlir_fmt;	/* format (FC4-type if type specific) */
+	__u8		rlir_clr_len;	/* common link incident record length */
+	__u8		rlir_cld_len;	/* common link incident desc. length */
+	__u8		rlir_slr_len;	/* spec. link incident record length */
+};
+
+/*
+ * CLIR - Common Link Incident Record Data. - Sent via RLIR.
+ */
+struct fc_els_clir {
+	__be64		clir_wwpn;	/* incident port name */
+	__be64		clir_wwnn;	/* incident port node name */
+	__u8		clir_port_type;	/* incident port type */
+	__u8		clir_port_id[3];	/* incident port ID */
+
+	__be64		clir_conn_wwpn;	/* connected port name */
+	__be64		clir_conn_wwnn;	/* connected node name */
+	__be64		clir_fab_name;	/* fabric name */
+	__be32		clir_phys_port;	/* physical port number */
+	__be32		clir_trans_id;	/* transaction ID */
+	__u8		clir_resv[3];	/* reserved */
+	__u8		clir_ts_fmt;	/* time stamp format */
+	__be64		clir_timestamp;	/* time stamp */
+};
+
+/*
+ * CLIR clir_ts_fmt - time stamp format values.
+ */
+enum fc_els_clir_ts_fmt {
+	ELS_CLIR_TS_UNKNOWN = 	0,	/* time stamp field unknown */
+	ELS_CLIR_TS_SEC_FRAC = 	1,	/* time in seconds and fractions */
+	ELS_CLIR_TS_CSU =	2,	/* time in clock synch update format */
+};
+
+/*
+ * Common Link Incident Descriptor - sent via RLIR.
+ */
+struct fc_els_clid {
+	__u8		clid_iq;	/* incident qualifier flags */
+	__u8		clid_ic;	/* incident code */
+	__be16		clid_epai;	/* domain/area of ISL */
+};
+
+/*
+ * CLID incident qualifier flags.
+ */
+enum fc_els_clid_iq {
+	ELS_CLID_SWITCH =	0x20,	/* incident port is a switch node */
+	ELS_CLID_E_PORT =	0x10,	/* incident is an ISL (E) port */
+	ELS_CLID_SEV_MASK =	0x0c,	/* severity 2-bit field mask */
+	ELS_CLID_SEV_INFO =	0x00,	/* report is informational */
+	ELS_CLID_SEV_INOP =	0x08,	/* link not operational */
+	ELS_CLID_SEV_DEG =	0x04,	/* link degraded but operational */
+	ELS_CLID_LASER =	0x02,	/* subassembly is a laser */
+	ELS_CLID_FRU =		0x01,	/* format can identify a FRU */
+};
+
+/*
+ * CLID incident code.
+ */
+enum fc_els_clid_ic {
+	ELS_CLID_IC_IMPL =	1,	/* implicit incident */
+	ELS_CLID_IC_BER =	2,	/* bit-error-rate threshold exceeded */
+	ELS_CLID_IC_LOS =	3,	/* loss of synch or signal */
+	ELS_CLID_IC_NOS =	4,	/* non-operational primitive sequence */
+	ELS_CLID_IC_PST =	5,	/* primitive sequence timeout */
+	ELS_CLID_IC_INVAL =	6,	/* invalid primitive sequence */
+	ELS_CLID_IC_LOOP_TO =	7,	/* loop initialization time out */
+	ELS_CLID_IC_LIP =	8,	/* receiving LIP */
+};
+
+#endif /* _FC_ELS_H_ */
diff --git a/include/scsi/fc/fc_encaps.h b/include/scsi/fc/fc_encaps.h
new file mode 100644
index 00000000..f180c3e1
--- /dev/null
+++ b/include/scsi/fc/fc_encaps.h
@@ -0,0 +1,138 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+#ifndef _FC_ENCAPS_H_
+#define _FC_ENCAPS_H_
+
+/*
+ * Protocol definitions from RFC 3643 - Fibre Channel Frame Encapsulation.
+ *
+ * Note:  The frame length field is the number of 32-bit words in
+ * the encapsulation including the fcip_encaps_header, CRC and EOF words.
+ * The minimum frame length value in bytes is (32 + 24 + 4 + 4) * 4 = 64.
+ * The maximum frame length value in bytes is (32 + 24 + 2112 + 4 + 4) = 2172.
+ */
+#define FC_ENCAPS_MIN_FRAME_LEN 64	/* min frame len (bytes) (see above) */
+#define FC_ENCAPS_MAX_FRAME_LEN (FC_ENCAPS_MIN_FRAME_LEN + FC_MAX_PAYLOAD)
+
+#define FC_ENCAPS_VER       1           /* current version number */
+
+struct fc_encaps_hdr {
+	__u8	fc_proto;	/* protocol number */
+	__u8	fc_ver;		/* version of encapsulation */
+	__u8	fc_proto_n;	/* ones complement of protocol */
+	__u8	fc_ver_n;	/* ones complement of version */
+
+	unsigned char fc_proto_data[8]; /* protocol specific data */
+
+	__be16	fc_len_flags;	/* 10-bit length/4 w/ 6 flag bits */
+	__be16	fc_len_flags_n;	/* ones complement of length / flags */
+
+	/*
+	 * Offset 0x10
+	 */
+	__be32	fc_time[2];	/* time stamp: seconds and fraction */
+	__be32	fc_crc;		/* CRC */
+	__be32	fc_sof;		/* start of frame (see FC_SOF below) */
+
+	/* 0x20 - FC frame content followed by EOF word */
+};
+
+#define FCIP_ENCAPS_HDR_LEN 0x20	/* expected length for asserts */
+
+/*
+ * Macro's for making redundant copies of EOF and SOF.
+ */
+#define FC_XY(x, y)		((((x) & 0xff) << 8) | ((y) & 0xff))
+#define FC_XYXY(x, y)		((FCIP_XY(x, y) << 16) | FCIP_XY(x, y))
+#define FC_XYNN(x, y)		(FCIP_XYXY(x, y) ^ 0xffff)
+
+#define FC_SOF_ENCODE(n)	FC_XYNN(n, n)
+#define FC_EOF_ENCODE(n)	FC_XYNN(n, n)
+
+/*
+ * SOF / EOF bytes.
+ */
+enum fc_sof {
+	FC_SOF_F =	0x28,	/* fabric */
+	FC_SOF_I4 =	0x29,	/* initiate class 4 */
+	FC_SOF_I2 =	0x2d,	/* initiate class 2 */
+	FC_SOF_I3 =	0x2e,	/* initiate class 3 */
+	FC_SOF_N4 =	0x31,	/* normal class 4 */
+	FC_SOF_N2 =	0x35,	/* normal class 2 */
+	FC_SOF_N3 =	0x36,	/* normal class 3 */
+	FC_SOF_C4 =	0x39,	/* activate class 4 */
+} __attribute__((packed));
+
+enum fc_eof {
+	FC_EOF_N =	0x41,	/* normal (not last frame of seq) */
+	FC_EOF_T =	0x42,	/* terminate (last frame of sequence) */
+	FC_EOF_RT =	0x44,
+	FC_EOF_DT =	0x46,	/* disconnect-terminate class-1 */
+	FC_EOF_NI =	0x49,	/* normal-invalid */
+	FC_EOF_DTI =	0x4e,	/* disconnect-terminate-invalid */
+	FC_EOF_RTI =	0x4f,
+	FC_EOF_A =	0x50,	/* abort */
+} __attribute__((packed));
+
+#define FC_SOF_CLASS_MASK 0x06	/* mask for class of service in SOF */
+
+/*
+ * Define classes in terms of the SOF code (initial).
+ */
+enum fc_class {
+	FC_CLASS_NONE = 0,	/* software value indicating no class */
+	FC_CLASS_2 =	FC_SOF_I2,
+	FC_CLASS_3 =	FC_SOF_I3,
+	FC_CLASS_4 =	FC_SOF_I4,
+	FC_CLASS_F =	FC_SOF_F,
+};
+
+/*
+ * Determine whether SOF code indicates the need for a BLS ACK.
+ */
+static inline int fc_sof_needs_ack(enum fc_sof sof)
+{
+	return (~sof) & 0x02;	/* true for class 1, 2, 4, 6, or F */
+}
+
+/*
+ * Given an fc_class, return the normal (non-initial) SOF value.
+ */
+static inline enum fc_sof fc_sof_normal(enum fc_class class)
+{
+	return class + FC_SOF_N3 - FC_SOF_I3;	/* diff is always 8 */
+}
+
+/*
+ * Compute class from SOF value.
+ */
+static inline enum fc_class fc_sof_class(enum fc_sof sof)
+{
+	return (sof & 0x7) | FC_SOF_F;
+}
+
+/*
+ * Determine whether SOF is for the initial frame of a sequence.
+ */
+static inline int fc_sof_is_init(enum fc_sof sof)
+{
+	return sof < 0x30;
+}
+
+#endif /* _FC_ENCAPS_H_ */
diff --git a/include/scsi/fc/fc_fc2.h b/include/scsi/fc/fc_fc2.h
new file mode 100644
index 00000000..f87777d0
--- /dev/null
+++ b/include/scsi/fc/fc_fc2.h
@@ -0,0 +1,123 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_FC2_H_
+#define _FC_FC2_H_
+
+/*
+ * Fibre Channel Exchanges and Sequences.
+ */
+#ifndef PACKED
+#define PACKED  __attribute__ ((__packed__))
+#endif /* PACKED */
+
+
+/*
+ * Sequence Status Block.
+ * This format is set by the FC-FS standard and is sent over the wire.
+ * Note that the fields aren't all naturally aligned.
+ */
+struct fc_ssb {
+	__u8	ssb_seq_id;		/* sequence ID */
+	__u8	_ssb_resvd;
+	__be16	ssb_low_seq_cnt;	/* lowest SEQ_CNT */
+
+	__be16	ssb_high_seq_cnt;	/* highest SEQ_CNT */
+	__be16	ssb_s_stat;		/* sequence status flags */
+
+	__be16	ssb_err_seq_cnt;	/* error SEQ_CNT */
+	__u8	ssb_fh_cs_ctl;		/* frame header CS_CTL */
+	__be16	ssb_fh_ox_id;		/* frame header OX_ID */
+	__be16	ssb_rx_id;		/* responder's exchange ID */
+	__u8	_ssb_resvd2[2];
+} PACKED;
+
+/*
+ * The SSB should be 17 bytes.  Since it's layout is somewhat strange,
+ * we define the size here so that code can ASSERT that the size comes out
+ * correct.
+ */
+#define FC_SSB_SIZE         17          /* length of fc_ssb for assert */
+
+/*
+ * ssb_s_stat - flags from FC-FS-2 T11/1619-D Rev 0.90.
+ */
+#define SSB_ST_RESP         (1 << 15)   /* sequence responder */
+#define SSB_ST_ACTIVE       (1 << 14)   /* sequence is active */
+#define SSB_ST_ABNORMAL     (1 << 12)   /* abnormal ending condition */
+
+#define SSB_ST_REQ_MASK     (3 << 10)   /* ACK, abort sequence condition */
+#define SSB_ST_REQ_CONT     (0 << 10)
+#define SSB_ST_REQ_ABORT    (1 << 10)
+#define SSB_ST_REQ_STOP     (2 << 10)
+#define SSB_ST_REQ_RETRANS  (3 << 10)
+
+#define SSB_ST_ABTS         (1 << 9)    /* ABTS protocol completed */
+#define SSB_ST_RETRANS      (1 << 8)    /* retransmission completed */
+#define SSB_ST_TIMEOUT      (1 << 7)    /* sequence timed out by recipient */
+#define SSB_ST_P_RJT        (1 << 6)    /* P_RJT transmitted */
+
+#define SSB_ST_CLASS_BIT    4           /* class of service field LSB */
+#define SSB_ST_CLASS_MASK   3           /* class of service mask */
+#define SSB_ST_ACK          (1 << 3)    /* ACK (EOFt or EOFdt) transmitted */
+
+/*
+ * Exchange Status Block.
+ * This format is set by the FC-FS standard and is sent over the wire.
+ * Note that the fields aren't all naturally aligned.
+ */
+struct fc_esb {
+	__u8	esb_cs_ctl;		/* CS_CTL for frame header */
+	__be16	esb_ox_id;		/* originator exchange ID */
+	__be16	esb_rx_id;		/* responder exchange ID */
+	__be32	esb_orig_fid;		/* fabric ID of originator */
+	__be32	esb_resp_fid;		/* fabric ID of responder */
+	__be32	esb_e_stat;		/* status */
+	__u8	_esb_resvd[4];
+	__u8	esb_service_params[112]; /* TBD */
+	__u8	esb_seq_status[8];	/* sequence statuses, 8 bytes each */
+} __attribute__((packed));
+
+/*
+ * Define expected size for ASSERTs.
+ * See comments on FC_SSB_SIZE.
+ */
+#define FC_ESB_SIZE         (1 + 5*4 + 112 + 8)     /* expected size */
+
+/*
+ * esb_e_stat - flags from FC-FS-2 T11/1619-D Rev 0.90.
+ */
+#define ESB_ST_RESP         (1 << 31)   /* responder to exchange */
+#define ESB_ST_SEQ_INIT     (1 << 30)   /* port holds sequence initiaive */
+#define ESB_ST_COMPLETE     (1 << 29)   /* exchange is complete */
+#define ESB_ST_ABNORMAL     (1 << 28)   /* abnormal ending condition */
+#define ESB_ST_REC_QUAL     (1 << 26)   /* recovery qualifier active */
+
+#define ESB_ST_ERRP_BIT     24          /* LSB for error policy */
+#define ESB_ST_ERRP_MASK    (3 << 24)   /* mask for error policy */
+#define ESB_ST_ERRP_MULT    (0 << 24)   /* abort, discard multiple sequences */
+#define ESB_ST_ERRP_SING    (1 << 24)   /* abort, discard single sequence */
+#define ESB_ST_ERRP_INF     (2 << 24)   /* process with infinite buffers */
+#define ESB_ST_ERRP_IMM     (3 << 24)   /* discard mult. with immed. retran. */
+
+#define ESB_ST_OX_ID_INVL   (1 << 23)   /* originator XID invalid */
+#define ESB_ST_RX_ID_INVL   (1 << 22)   /* responder XID invalid */
+#define ESB_ST_PRI_INUSE    (1 << 21)   /* priority / preemption in use */
+
+#endif /* _FC_FC2_H_ */
diff --git a/include/scsi/fc/fc_fcoe.h b/include/scsi/fc/fc_fcoe.h
new file mode 100644
index 00000000..d5dcd606
--- /dev/null
+++ b/include/scsi/fc/fc_fcoe.h
@@ -0,0 +1,108 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_FCOE_H_
+#define	_FC_FCOE_H_
+
+/*
+ * FCoE - Fibre Channel over Ethernet.
+ * See T11 FC-BB-5 Rev 2.00 (09-056v5.pdf)
+ */
+
+/*
+ * Default FC_FCOE_OUI / FC-MAP value.
+ */
+#define	FC_FCOE_OUI	0x0efc00	/* upper 24 bits of FCOE MAC */
+
+/*
+ * Fabric Login (FLOGI) MAC for non-FIP use.  Non-FIP use is deprecated.
+ */
+#define	FC_FCOE_FLOGI_MAC { 0x0e, 0xfc, 0x00, 0xff, 0xff, 0xfe }
+
+#define	FC_FCOE_VER	0			/* version */
+
+/*
+ * Ethernet Addresses based on FC S_ID and D_ID.
+ * Generated by FC_FCOE_OUI | S_ID/D_ID
+ */
+#define	FC_FCOE_ENCAPS_ID(n)	(((u64) FC_FCOE_OUI << 24) | (n))
+#define	FC_FCOE_DECAPS_ID(n)	((n) >> 24)
+
+/*
+ * FCoE frame header - 14 bytes
+ * This follows the VLAN header, which includes the ethertype.
+ */
+struct fcoe_hdr {
+	__u8		fcoe_ver;	/* version field - upper 4 bits */
+	__u8		fcoe_resvd[12];	/* reserved - send zero and ignore */
+	__u8		fcoe_sof;	/* start of frame per RFC 3643 */
+};
+
+#define FC_FCOE_DECAPS_VER(hp)	    ((hp)->fcoe_ver >> 4)
+#define FC_FCOE_ENCAPS_VER(hp, ver) ((hp)->fcoe_ver = (ver) << 4)
+
+/*
+ * FCoE CRC & EOF - 8 bytes.
+ */
+struct fcoe_crc_eof {
+	__le32		fcoe_crc32;	/* CRC for FC packet */
+	__u8		fcoe_eof;	/* EOF from RFC 3643 */
+	__u8		fcoe_resvd[3];	/* reserved - send zero and ignore */
+} __attribute__((packed));
+
+/*
+ * Minimum FCoE + FC header length
+ * 14 bytes FCoE header + 24 byte FC header = 38 bytes
+ */
+#define FCOE_HEADER_LEN 38
+
+/*
+ * Minimum FCoE frame size
+ * 14 bytes FCoE header + 24 byte FC header + 8 byte FCoE trailer = 46 bytes
+ */
+#define FCOE_MIN_FRAME 46
+
+/*
+ * FCoE Link Error Status Block: T11 FC-BB-5 Rev2.0, Clause 7.10.
+ */
+struct fcoe_fc_els_lesb {
+	__be32		lesb_link_fail;	/* link failure count */
+	__be32		lesb_vlink_fail; /* virtual link failure count */
+	__be32		lesb_miss_fka;	/* missing FIP keep-alive count */
+	__be32		lesb_symb_err;	/* symbol error during carrier count */
+	__be32		lesb_err_block;	/* errored block count */
+	__be32		lesb_fcs_error; /* frame check sequence error count */
+};
+
+/*
+ * fc_fcoe_set_mac - Store OUI + DID into MAC address field.
+ * @mac: mac address to be set
+ * @did: fc dest id to use
+ */
+static inline void fc_fcoe_set_mac(u8 *mac, u8 *did)
+{
+	mac[0] = (u8) (FC_FCOE_OUI >> 16);
+	mac[1] = (u8) (FC_FCOE_OUI >> 8);
+	mac[2] = (u8) FC_FCOE_OUI;
+	mac[3] = did[0];
+	mac[4] = did[1];
+	mac[5] = did[2];
+}
+
+#endif /* _FC_FCOE_H_ */
diff --git a/include/scsi/fc/fc_fcp.h b/include/scsi/fc/fc_fcp.h
new file mode 100644
index 00000000..0d7d67e9
--- /dev/null
+++ b/include/scsi/fc/fc_fcp.h
@@ -0,0 +1,210 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_FCP_H_
+#define	_FC_FCP_H_
+
+#include <scsi/scsi.h>
+
+/*
+ * Fibre Channel Protocol for SCSI.
+ * From T10 FCP-3, T10 project 1560-D Rev 4, Sept. 13, 2005.
+ */
+
+/*
+ * fc/fs.h defines FC_TYPE_FCP.
+ */
+
+/*
+ * Service parameter page parameters (word 3 bits) for Process Login.
+ */
+#define	FCP_SPPF_TASK_RETRY_ID	0x0200	/* task retry ID requested */
+#define	FCP_SPPF_RETRY		0x0100	/* retry supported */
+#define	FCP_SPPF_CONF_COMPL	0x0080	/* confirmed completion allowed */
+#define	FCP_SPPF_OVLY_ALLOW	0x0040	/* data overlay allowed */
+#define	FCP_SPPF_INIT_FCN	0x0020	/* initiator function */
+#define	FCP_SPPF_TARG_FCN	0x0010	/* target function */
+#define	FCP_SPPF_RD_XRDY_DIS	0x0002	/* disable XFER_RDY for reads */
+#define	FCP_SPPF_WR_XRDY_DIS	0x0001	/* disable XFER_RDY for writes */
+
+/*
+ * FCP_CMND IU Payload.
+ */
+struct fcp_cmnd {
+	struct scsi_lun	fc_lun;		/* logical unit number */
+	__u8		fc_cmdref;	/* command reference number */
+	__u8		fc_pri_ta;	/* priority and task attribute */
+	__u8		fc_tm_flags;	/* task management flags */
+	__u8		fc_flags;	/* additional len & flags */
+	__u8		fc_cdb[16];	/* base CDB */
+	__be32		fc_dl;		/* data length (must follow fc_cdb) */
+};
+
+#define	FCP_CMND_LEN	32	/* expected length of structure */
+
+struct fcp_cmnd32 {
+	struct scsi_lun	fc_lun;		/* logical unit number */
+	__u8		fc_cmdref;	/* command reference number */
+	__u8		fc_pri_ta;	/* priority and task attribute */
+	__u8		fc_tm_flags;	/* task management flags */
+	__u8		fc_flags;	/* additional len & flags */
+	__u8		fc_cdb[32];	/* base CDB */
+	__be32		fc_dl;		/* data length (must follow fc_cdb) */
+};
+
+#define	FCP_CMND32_LEN	    48	/* expected length of structure */
+#define	FCP_CMND32_ADD_LEN  (16 / 4)	/* Additional cdb length */
+
+/*
+ * fc_pri_ta.
+ */
+#define	FCP_PTA_SIMPLE	    0	/* simple task attribute */
+#define	FCP_PTA_HEADQ	    1	/* head of queue task attribute */
+#define	FCP_PTA_ORDERED     2	/* ordered task attribute */
+#define	FCP_PTA_ACA	    4	/* auto. contingent allegiance */
+#define	FCP_PTA_MASK	    7	/* mask for task attribute field */
+#define	FCP_PRI_SHIFT	    3	/* priority field starts in bit 3 */
+#define	FCP_PRI_RESVD_MASK  0x80	/* reserved bits in priority field */
+
+/*
+ * fc_tm_flags - task management flags field.
+ */
+#define	FCP_TMF_CLR_ACA		0x40	/* clear ACA condition */
+#define	FCP_TMF_TGT_RESET	0x20	/* target reset task management,
+					   deprecated as of FCP-3 */
+#define	FCP_TMF_LUN_RESET	0x10	/* logical unit reset task management */
+#define	FCP_TMF_CLR_TASK_SET	0x04	/* clear task set */
+#define	FCP_TMF_ABT_TASK_SET	0x02	/* abort task set */
+
+/*
+ * fc_flags.
+ *  Bits 7:2 are the additional FCP_CDB length / 4.
+ */
+#define	FCP_CFL_LEN_MASK	0xfc	/* mask for additional length */
+#define	FCP_CFL_LEN_SHIFT	2	/* shift bits for additional length */
+#define	FCP_CFL_RDDATA		0x02	/* read data */
+#define	FCP_CFL_WRDATA		0x01	/* write data */
+
+/*
+ * FCP_TXRDY IU - transfer ready payload.
+ */
+struct fcp_txrdy {
+	__be32		ft_data_ro;	/* data relative offset */
+	__be32		ft_burst_len;	/* burst length */
+	__u8		_ft_resvd[4];	/* reserved */
+};
+
+#define	FCP_TXRDY_LEN	12	/* expected length of structure */
+
+/*
+ * FCP_RESP IU - response payload.
+ *
+ * The response payload comes in three parts: the flags/status, the
+ * sense/response lengths and the sense data/response info section.
+ *
+ * From FCP3r04, note 6 of section 9.5.13:
+ *
+ * Some early implementations presented the FCP_RSP IU without the FCP_RESID,
+ * FCP_SNS_LEN, and FCP_RSP_LEN fields if the FCP_RESID_UNDER, FCP_RESID_OVER,
+ * FCP_SNS_LEN_VALID, and FCP_RSP_LEN_VALID bits were all set to zero. This
+ * non-standard behavior should be tolerated.
+ *
+ * All response frames will always contain the fcp_resp template.  Some
+ * will also include the fcp_resp_len template.
+ */
+struct fcp_resp {
+	__u8		_fr_resvd[8];	/* reserved */
+	__be16		fr_retry_delay;	/* retry delay timer */
+	__u8		fr_flags;	/* flags */
+	__u8		fr_status;	/* SCSI status code */
+};
+
+#define	FCP_RESP_LEN	12	/* expected length of structure */
+
+struct fcp_resp_ext {
+	__be32		fr_resid;	/* Residual value */
+	__be32		fr_sns_len;	/* SCSI Sense length */
+	__be32		fr_rsp_len;	/* Response Info length */
+
+	/*
+	 * Optionally followed by RSP info and/or SNS info and/or
+	 * bidirectional read residual length, if any.
+	 */
+};
+
+#define FCP_RESP_EXT_LEN    12  /* expected length of the structure */
+
+struct fcp_resp_rsp_info {
+    __u8      _fr_resvd[3];       /* reserved */
+    __u8      rsp_code;           /* Response Info Code */
+    __u8      _fr_resvd2[4];      /* reserved */
+};
+
+struct fcp_resp_with_ext {
+	struct fcp_resp resp;
+	struct fcp_resp_ext ext;
+};
+
+#define	FCP_RESP_WITH_EXT   (FCP_RESP_LEN + FCP_RESP_EXT_LEN)
+
+/*
+ * fr_flags.
+ */
+#define	FCP_BIDI_RSP	    0x80	/* bidirectional read response */
+#define	FCP_BIDI_READ_UNDER 0x40	/* bidir. read less than requested */
+#define	FCP_BIDI_READ_OVER  0x20	/* DL insufficient for full transfer */
+#define	FCP_CONF_REQ	    0x10	/* confirmation requested */
+#define	FCP_RESID_UNDER     0x08	/* transfer shorter than expected */
+#define	FCP_RESID_OVER	    0x04	/* DL insufficient for full transfer */
+#define	FCP_SNS_LEN_VAL     0x02	/* SNS_LEN field is valid */
+#define	FCP_RSP_LEN_VAL     0x01	/* RSP_LEN field is valid */
+
+/*
+ * rsp_codes
+ */
+enum fcp_resp_rsp_codes {
+	FCP_TMF_CMPL = 0,
+	FCP_DATA_LEN_INVALID = 1,
+	FCP_CMND_FIELDS_INVALID = 2,
+	FCP_DATA_PARAM_MISMATCH = 3,
+	FCP_TMF_REJECTED = 4,
+	FCP_TMF_FAILED = 5,
+	FCP_TMF_INVALID_LUN = 9,
+};
+
+/*
+ * FCP SRR Link Service request - Sequence Retransmission Request.
+ */
+struct fcp_srr {
+	__u8		srr_op;		/* opcode ELS_SRR */
+	__u8		srr_resvd[3];	/* opcode / reserved - must be zero */
+	__be16		srr_ox_id;	/* OX_ID of failed command */
+	__be16		srr_rx_id;	/* RX_ID of failed command */
+	__be32		srr_rel_off;	/* relative offset */
+	__u8		srr_r_ctl;	/* r_ctl for the information unit */
+	__u8		srr_resvd2[3];	/* reserved */
+};
+
+/*
+ * Feature bits in name server FC-4 Features object.
+ */
+#define	FCP_FEAT_TARG	(1 << 0)	/* target function supported */
+#define	FCP_FEAT_INIT	(1 << 1)	/* initiator function supported */
+
+#endif /* _FC_FCP_H_ */
diff --git a/include/scsi/fc/fc_fip.h b/include/scsi/fc/fc_fip.h
new file mode 100644
index 00000000..ae25d4ab
--- /dev/null
+++ b/include/scsi/fc/fc_fip.h
@@ -0,0 +1,280 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _FC_FIP_H_
+#define _FC_FIP_H_
+
+#include <scsi/fc/fc_ns.h>
+
+/*
+ * This version is based on:
+ * http://www.t11.org/ftp/t11/pub/fc/bb-5/08-543v1.pdf
+ * and T11 FC-BB-6 10-019v4.pdf (June 2010 VN2VN proposal)
+ */
+
+#define FIP_DEF_PRI	128	/* default selection priority */
+#define FIP_DEF_FC_MAP	0x0efc00 /* default FCoE MAP (MAC OUI) value */
+#define FIP_DEF_FKA	8000	/* default FCF keep-alive/advert period (mS) */
+#define FIP_VN_KA_PERIOD 90000	/* required VN_port keep-alive period (mS) */
+#define FIP_FCF_FUZZ	100	/* random time added by FCF (mS) */
+
+/*
+ * VN2VN proposed-standard values.
+ */
+#define FIP_VN_FC_MAP	0x0efd00 /* MAC OUI for VN2VN use */
+#define FIP_VN_PROBE_WAIT 100	/* interval between VN2VN probes (ms) */
+#define FIP_VN_ANN_WAIT 400	/* interval between VN2VN announcements (ms) */
+#define FIP_VN_RLIM_INT 10000	/* interval between probes when rate limited */
+#define FIP_VN_RLIM_COUNT 10	/* number of probes before rate limiting */
+#define FIP_VN_BEACON_INT 8000	/* interval between VN2VN beacons */
+#define FIP_VN_BEACON_FUZZ 100	/* random time to add to beacon period (ms) */
+
+/*
+ * Multicast MAC addresses.  T11-adopted.
+ */
+#define FIP_ALL_FCOE_MACS	((__u8[6]) { 1, 0x10, 0x18, 1, 0, 0 })
+#define FIP_ALL_ENODE_MACS	((__u8[6]) { 1, 0x10, 0x18, 1, 0, 1 })
+#define FIP_ALL_FCF_MACS	((__u8[6]) { 1, 0x10, 0x18, 1, 0, 2 })
+#define FIP_ALL_VN2VN_MACS	((__u8[6]) { 1, 0x10, 0x18, 1, 0, 4 })
+#define FIP_ALL_P2P_MACS	((__u8[6]) { 1, 0x10, 0x18, 1, 0, 5 })
+
+#define FIP_VER		1		/* version for fip_header */
+
+struct fip_header {
+	__u8	fip_ver;		/* upper 4 bits are the version */
+	__u8	fip_resv1;		/* reserved */
+	__be16	fip_op;			/* operation code */
+	__u8	fip_resv2;		/* reserved */
+	__u8	fip_subcode;		/* lower 4 bits are sub-code */
+	__be16	fip_dl_len;		/* length of descriptors in words */
+	__be16	fip_flags;		/* header flags */
+} __attribute__((packed));
+
+#define FIP_VER_SHIFT	4
+#define FIP_VER_ENCAPS(v) ((v) << FIP_VER_SHIFT)
+#define FIP_VER_DECAPS(v) ((v) >> FIP_VER_SHIFT)
+#define FIP_BPW		4		/* bytes per word for lengths */
+
+/*
+ * fip_op.
+ */
+enum fip_opcode {
+	FIP_OP_DISC =	1,		/* discovery, advertisement, etc. */
+	FIP_OP_LS =	2,		/* Link Service request or reply */
+	FIP_OP_CTRL =	3,		/* Keep Alive / Link Reset */
+	FIP_OP_VLAN =	4,		/* VLAN discovery */
+	FIP_OP_VN2VN =	5,		/* VN2VN operation */
+	FIP_OP_VENDOR_MIN = 0xfff8,	/* min vendor-specific opcode */
+	FIP_OP_VENDOR_MAX = 0xfffe,	/* max vendor-specific opcode */
+};
+
+/*
+ * Subcodes for FIP_OP_DISC.
+ */
+enum fip_disc_subcode {
+	FIP_SC_SOL =	1,		/* solicitation */
+	FIP_SC_ADV =	2,		/* advertisement */
+};
+
+/*
+ * Subcodes for FIP_OP_LS.
+ */
+enum fip_trans_subcode {
+	FIP_SC_REQ =	1,		/* request */
+	FIP_SC_REP =	2,		/* reply */
+};
+
+/*
+ * Subcodes for FIP_OP_RESET.
+ */
+enum fip_reset_subcode {
+	FIP_SC_KEEP_ALIVE = 1,		/* keep-alive from VN_Port */
+	FIP_SC_CLR_VLINK = 2,		/* clear virtual link from VF_Port */
+};
+
+/*
+ * Subcodes for FIP_OP_VLAN.
+ */
+enum fip_vlan_subcode {
+	FIP_SC_VL_REQ =	1,		/* request */
+	FIP_SC_VL_REP =	2,		/* reply */
+};
+
+/*
+ * Subcodes for FIP_OP_VN2VN.
+ */
+enum fip_vn2vn_subcode {
+	FIP_SC_VN_PROBE_REQ = 1,	/* probe request */
+	FIP_SC_VN_PROBE_REP = 2,	/* probe reply */
+	FIP_SC_VN_CLAIM_NOTIFY = 3,	/* claim notification */
+	FIP_SC_VN_CLAIM_REP = 4,	/* claim response */
+	FIP_SC_VN_BEACON = 5,		/* beacon */
+};
+
+/*
+ * flags in header fip_flags.
+ */
+enum fip_flag {
+	FIP_FL_FPMA =	0x8000,		/* supports FPMA fabric-provided MACs */
+	FIP_FL_SPMA =	0x4000,		/* supports SPMA server-provided MACs */
+	FIP_FL_REC_OR_P2P = 0x0008,	/* configured addr or point-to-point */
+	FIP_FL_AVAIL =	0x0004,		/* available for FLOGI/ELP */
+	FIP_FL_SOL =	0x0002,		/* this is a solicited message */
+	FIP_FL_FPORT =	0x0001,		/* sent from an F port */
+};
+
+/*
+ * Common descriptor header format.
+ */
+struct fip_desc {
+	__u8	fip_dtype;		/* type - see below */
+	__u8	fip_dlen;		/* length - in 32-bit words */
+};
+
+enum fip_desc_type {
+	FIP_DT_PRI =	1,		/* priority for forwarder selection */
+	FIP_DT_MAC =	2,		/* MAC address */
+	FIP_DT_MAP_OUI = 3,		/* FC-MAP OUI */
+	FIP_DT_NAME =	4,		/* switch name or node name */
+	FIP_DT_FAB =	5,		/* fabric descriptor */
+	FIP_DT_FCOE_SIZE = 6,		/* max FCoE frame size */
+	FIP_DT_FLOGI =	7,		/* FLOGI request or response */
+	FIP_DT_FDISC =	8,		/* FDISC request or response */
+	FIP_DT_LOGO =	9,		/* LOGO request or response */
+	FIP_DT_ELP =	10,		/* ELP request or response */
+	FIP_DT_VN_ID =	11,		/* VN_Node Identifier */
+	FIP_DT_FKA =	12,		/* advertisement keep-alive period */
+	FIP_DT_VENDOR =	13,		/* vendor ID */
+	FIP_DT_VLAN =	14,		/* vlan number */
+	FIP_DT_FC4F =	15,		/* FC-4 features */
+	FIP_DT_LIMIT,			/* max defined desc_type + 1 */
+	FIP_DT_VENDOR_BASE = 128,	/* first vendor-specific desc_type */
+};
+
+/*
+ * FIP_DT_PRI - priority descriptor.
+ */
+struct fip_pri_desc {
+	struct fip_desc fd_desc;
+	__u8		fd_resvd;
+	__u8		fd_pri;		/* FCF priority:  higher is better */
+} __attribute__((packed));
+
+/*
+ * FIP_DT_MAC - MAC address descriptor.
+ */
+struct fip_mac_desc {
+	struct fip_desc fd_desc;
+	__u8		fd_mac[ETH_ALEN];
+} __attribute__((packed));
+
+/*
+ * FIP_DT_MAP - descriptor.
+ */
+struct fip_map_desc {
+	struct fip_desc fd_desc;
+	__u8		fd_resvd[3];
+	__u8		fd_map[3];
+} __attribute__((packed));
+
+/*
+ * FIP_DT_NAME descriptor.
+ */
+struct fip_wwn_desc {
+	struct fip_desc fd_desc;
+	__u8		fd_resvd[2];
+	__be64		fd_wwn;		/* 64-bit WWN, unaligned */
+} __attribute__((packed));
+
+/*
+ * FIP_DT_FAB descriptor.
+ */
+struct fip_fab_desc {
+	struct fip_desc fd_desc;
+	__be16		fd_vfid;	/* virtual fabric ID */
+	__u8		fd_resvd;
+	__u8		fd_map[3];	/* FC-MAP value */
+	__be64		fd_wwn;		/* fabric name, unaligned */
+} __attribute__((packed));
+
+/*
+ * FIP_DT_FCOE_SIZE descriptor.
+ */
+struct fip_size_desc {
+	struct fip_desc fd_desc;
+	__be16		fd_size;
+} __attribute__((packed));
+
+/*
+ * Descriptor that encapsulates an ELS or ILS frame.
+ * The encapsulated frame immediately follows this header, without
+ * SOF, EOF, or CRC.
+ */
+struct fip_encaps {
+	struct fip_desc fd_desc;
+	__u8		fd_resvd[2];
+} __attribute__((packed));
+
+/*
+ * FIP_DT_VN_ID - VN_Node Identifier descriptor.
+ */
+struct fip_vn_desc {
+	struct fip_desc fd_desc;
+	__u8		fd_mac[ETH_ALEN];
+	__u8		fd_resvd;
+	__u8		fd_fc_id[3];
+	__be64		fd_wwpn;	/* port name, unaligned */
+} __attribute__((packed));
+
+/*
+ * FIP_DT_FKA - Advertisement keep-alive period.
+ */
+struct fip_fka_desc {
+	struct fip_desc fd_desc;
+	__u8		fd_resvd;
+	__u8		fd_flags;	/* bit0 is fka disable flag */
+	__be32		fd_fka_period;	/* adv./keep-alive period in mS */
+} __attribute__((packed));
+
+/*
+ * flags for fip_fka_desc.fd_flags
+ */
+enum fip_fka_flags {
+	FIP_FKA_ADV_D =	0x01,		/* no need for FKA from ENode */
+};
+
+/* FIP_DT_FKA flags */
+
+/*
+ * FIP_DT_FC4F - FC-4 features.
+ */
+struct fip_fc4_feat {
+	struct fip_desc fd_desc;
+	__u8		fd_resvd[2];
+	struct fc_ns_fts fd_fts;
+	struct fc_ns_ff	fd_ff;
+} __attribute__((packed));
+
+/*
+ * FIP_DT_VENDOR descriptor.
+ */
+struct fip_vendor_desc {
+	struct fip_desc fd_desc;
+	__u8		fd_resvd[2];
+	__u8		fd_vendor_id[8];
+} __attribute__((packed));
+
+#endif /* _FC_FIP_H_ */
diff --git a/include/scsi/fc/fc_fs.h b/include/scsi/fc/fc_fs.h
new file mode 100644
index 00000000..50f28b14
--- /dev/null
+++ b/include/scsi/fc/fc_fs.h
@@ -0,0 +1,348 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_FS_H_
+#define _FC_FS_H_
+
+#include <linux/types.h>
+
+/*
+ * Fibre Channel Framing and Signalling definitions.
+ * From T11 FC-FS-2 Rev 0.90 - 9 August 2005.
+ */
+
+/*
+ * Frame header
+ */
+struct fc_frame_header {
+	__u8          fh_r_ctl;	/* routing control */
+	__u8          fh_d_id[3];	/* Destination ID */
+
+	__u8          fh_cs_ctl;	/* class of service control / pri */
+	__u8          fh_s_id[3];	/* Source ID */
+
+	__u8          fh_type;		/* see enum fc_fh_type below */
+	__u8          fh_f_ctl[3];	/* frame control */
+
+	__u8          fh_seq_id;	/* sequence ID */
+	__u8          fh_df_ctl;	/* data field control */
+	__be16        fh_seq_cnt;	/* sequence count */
+
+	__be16        fh_ox_id;		/* originator exchange ID */
+	__be16        fh_rx_id;		/* responder exchange ID */
+	__be32        fh_parm_offset;	/* parameter or relative offset */
+};
+
+#define FC_FRAME_HEADER_LEN 24	/* expected length of structure */
+
+#define FC_MAX_PAYLOAD  2112U		/* max payload length in bytes */
+#define FC_MIN_MAX_PAYLOAD  256U 	/* lower limit on max payload */
+
+#define FC_MAX_FRAME	(FC_MAX_PAYLOAD + FC_FRAME_HEADER_LEN)
+#define FC_MIN_MAX_FRAME (FC_MIN_MAX_PAYLOAD + FC_FRAME_HEADER_LEN)
+
+/*
+ * fh_r_ctl - Routing control definitions.
+ */
+    /*
+     * FC-4 device_data.
+     */
+enum fc_rctl {
+	FC_RCTL_DD_UNCAT = 0x00,	/* uncategorized information */
+	FC_RCTL_DD_SOL_DATA = 0x01,	/* solicited data */
+	FC_RCTL_DD_UNSOL_CTL = 0x02,	/* unsolicited control */
+	FC_RCTL_DD_SOL_CTL = 0x03,	/* solicited control or reply */
+	FC_RCTL_DD_UNSOL_DATA = 0x04,	/* unsolicited data */
+	FC_RCTL_DD_DATA_DESC = 0x05,	/* data descriptor */
+	FC_RCTL_DD_UNSOL_CMD = 0x06,	/* unsolicited command */
+	FC_RCTL_DD_CMD_STATUS = 0x07,	/* command status */
+
+#define FC_RCTL_ILS_REQ FC_RCTL_DD_UNSOL_CTL	/* ILS request */
+#define FC_RCTL_ILS_REP FC_RCTL_DD_SOL_CTL	/* ILS reply */
+
+	/*
+	 * Extended Link_Data
+	 */
+	FC_RCTL_ELS_REQ = 0x22,	/* extended link services request */
+	FC_RCTL_ELS_REP = 0x23,	/* extended link services reply */
+	FC_RCTL_ELS4_REQ = 0x32, /* FC-4 ELS request */
+	FC_RCTL_ELS4_REP = 0x33, /* FC-4 ELS reply */
+	/*
+	 * Optional Extended Headers
+	 */
+	FC_RCTL_VFTH = 0x50,	/* virtual fabric tagging header */
+	FC_RCTL_IFRH = 0x51,	/* inter-fabric routing header */
+	FC_RCTL_ENCH = 0x52,	/* encapsulation header */
+	/*
+	 * Basic Link Services fh_r_ctl values.
+	 */
+	FC_RCTL_BA_NOP = 0x80,	/* basic link service NOP */
+	FC_RCTL_BA_ABTS = 0x81,	/* basic link service abort */
+	FC_RCTL_BA_RMC = 0x82,	/* remove connection */
+	FC_RCTL_BA_ACC = 0x84,	/* basic accept */
+	FC_RCTL_BA_RJT = 0x85,	/* basic reject */
+	FC_RCTL_BA_PRMT = 0x86,	/* dedicated connection preempted */
+	/*
+	 * Link Control Information.
+	 */
+	FC_RCTL_ACK_1 = 0xc0,	/* acknowledge_1 */
+	FC_RCTL_ACK_0 = 0xc1,	/* acknowledge_0 */
+	FC_RCTL_P_RJT = 0xc2,	/* port reject */
+	FC_RCTL_F_RJT = 0xc3,	/* fabric reject */
+	FC_RCTL_P_BSY = 0xc4,	/* port busy */
+	FC_RCTL_F_BSY = 0xc5,	/* fabric busy to data frame */
+	FC_RCTL_F_BSYL = 0xc6,	/* fabric busy to link control frame */
+	FC_RCTL_LCR = 0xc7,	/* link credit reset */
+	FC_RCTL_END = 0xc9,	/* end */
+};
+				    /* incomplete list of definitions */
+
+/*
+ * R_CTL names initializer.
+ * Please keep this matching the above definitions.
+ */
+#define FC_RCTL_NAMES_INIT { \
+	[FC_RCTL_DD_UNCAT] =		"uncat",			\
+	[FC_RCTL_DD_SOL_DATA] =		"sol data",			\
+	[FC_RCTL_DD_UNSOL_CTL] =	"unsol ctl",			\
+	[FC_RCTL_DD_SOL_CTL] =		"sol ctl/reply",		\
+	[FC_RCTL_DD_UNSOL_DATA] =	"unsol data",			\
+	[FC_RCTL_DD_DATA_DESC] =	"data desc",			\
+	[FC_RCTL_DD_UNSOL_CMD] =	"unsol cmd",			\
+	[FC_RCTL_DD_CMD_STATUS] =	"cmd status",			\
+	[FC_RCTL_ELS_REQ] =		"ELS req",			\
+	[FC_RCTL_ELS_REP] =		"ELS rep",			\
+	[FC_RCTL_ELS4_REQ] =		"FC-4 ELS req",			\
+	[FC_RCTL_ELS4_REP] =		"FC-4 ELS rep",			\
+	[FC_RCTL_BA_NOP] =		"BLS NOP",			\
+	[FC_RCTL_BA_ABTS] =		"BLS abort",			\
+	[FC_RCTL_BA_RMC] =		"BLS remove connection",	\
+	[FC_RCTL_BA_ACC] =		"BLS accept",			\
+	[FC_RCTL_BA_RJT] =		"BLS reject",			\
+	[FC_RCTL_BA_PRMT] =		"BLS dedicated connection preempted", \
+	[FC_RCTL_ACK_1] =		"LC ACK_1",			\
+	[FC_RCTL_ACK_0] =		"LC ACK_0",			\
+	[FC_RCTL_P_RJT] =		"LC port reject",		\
+	[FC_RCTL_F_RJT] =		"LC fabric reject",		\
+	[FC_RCTL_P_BSY] =		"LC port busy",			\
+	[FC_RCTL_F_BSY] =		"LC fabric busy to data frame",	\
+	[FC_RCTL_F_BSYL] =		"LC fabric busy to link control frame",\
+	[FC_RCTL_LCR] =			"LC link credit reset",		\
+	[FC_RCTL_END] =			"LC end",			\
+}
+
+/*
+ * Well-known fabric addresses.
+ */
+enum fc_well_known_fid {
+	FC_FID_NONE =           0x000000,       /* No destination */
+	FC_FID_BCAST =		0xffffff,	/* broadcast */
+	FC_FID_FLOGI =		0xfffffe,	/* fabric login */
+	FC_FID_FCTRL =		0xfffffd,	/* fabric controller */
+	FC_FID_DIR_SERV =	0xfffffc,	/* directory server */
+	FC_FID_TIME_SERV =	0xfffffb,	/* time server */
+	FC_FID_MGMT_SERV =	0xfffffa,	/* management server */
+	FC_FID_QOS =		0xfffff9,	/* QoS Facilitator */
+	FC_FID_ALIASES =	0xfffff8,	/* alias server (FC-PH2) */
+	FC_FID_SEC_KEY =	0xfffff7,	/* Security key dist. server */
+	FC_FID_CLOCK =		0xfffff6,	/* clock synch server */
+	FC_FID_MCAST_SERV =	0xfffff5,	/* multicast server */
+};
+
+#define	FC_FID_WELL_KNOWN_MAX	0xffffff /* highest well-known fabric ID */
+#define	FC_FID_WELL_KNOWN_BASE	0xfffff5 /* start of well-known fabric ID */
+
+/*
+ * Other well-known addresses, outside the above contiguous range.
+ */
+#define	FC_FID_DOM_MGR		0xfffc00	/* domain manager base */
+
+/*
+ * Fabric ID bytes.
+ */
+#define	FC_FID_DOMAIN		0
+#define	FC_FID_PORT		1
+#define	FC_FID_LINK		2
+
+/*
+ * fh_type codes
+ */
+enum fc_fh_type {
+	FC_TYPE_BLS =	0x00,	/* basic link service */
+	FC_TYPE_ELS =	0x01,	/* extended link service */
+	FC_TYPE_IP =	0x05,	/* IP over FC, RFC 4338 */
+	FC_TYPE_FCP =	0x08,	/* SCSI FCP */
+	FC_TYPE_CT =	0x20,	/* Fibre Channel Services (FC-CT) */
+	FC_TYPE_ILS =	0x22,	/* internal link service */
+};
+
+/*
+ * FC_TYPE names initializer.
+ * Please keep this matching the above definitions.
+ */
+#define FC_TYPE_NAMES_INIT {				\
+	[FC_TYPE_BLS] =		"BLS",			\
+	[FC_TYPE_ELS] =		"ELS",			\
+	[FC_TYPE_IP] =		"IP",			\
+	[FC_TYPE_FCP] =		"FCP",			\
+	[FC_TYPE_CT] =		"CT",			\
+	[FC_TYPE_ILS] =		"ILS",			\
+}
+
+/*
+ * Exchange IDs.
+ */
+#define FC_XID_UNKNOWN  0xffff	/* unknown exchange ID */
+#define FC_XID_MIN	0x0	/* supported min exchange ID */
+#define FC_XID_MAX	0xfffe	/* supported max exchange ID */
+
+/*
+ * fh_f_ctl - Frame control flags.
+ */
+#define	FC_FC_EX_CTX	(1 << 23)	/* sent by responder to exchange */
+#define	FC_FC_SEQ_CTX	(1 << 22)	/* sent by responder to sequence */
+#define	FC_FC_FIRST_SEQ (1 << 21)	/* first sequence of this exchange */
+#define	FC_FC_LAST_SEQ	(1 << 20)	/* last sequence of this exchange */
+#define	FC_FC_END_SEQ	(1 << 19)	/* last frame of sequence */
+#define	FC_FC_END_CONN	(1 << 18)	/* end of class 1 connection pending */
+#define	FC_FC_RES_B17	(1 << 17)	/* reserved */
+#define	FC_FC_SEQ_INIT	(1 << 16)	/* transfer of sequence initiative */
+#define	FC_FC_X_ID_REASS (1 << 15)	/* exchange ID has been changed */
+#define	FC_FC_X_ID_INVAL (1 << 14)	/* exchange ID invalidated */
+
+#define	FC_FC_ACK_1	(1 << 12)	/* 13:12 = 1: ACK_1 expected */
+#define	FC_FC_ACK_N	(2 << 12)	/* 13:12 = 2: ACK_N expected */
+#define	FC_FC_ACK_0	(3 << 12)	/* 13:12 = 3: ACK_0 expected */
+
+#define	FC_FC_RES_B11	(1 << 11)	/* reserved */
+#define	FC_FC_RES_B10	(1 << 10)	/* reserved */
+#define	FC_FC_RETX_SEQ	(1 << 9)	/* retransmitted sequence */
+#define	FC_FC_UNI_TX	(1 << 8)	/* unidirectional transmit (class 1) */
+#define	FC_FC_CONT_SEQ(i) ((i) << 6)
+#define	FC_FC_ABT_SEQ(i) ((i) << 4)
+#define	FC_FC_REL_OFF	(1 << 3)	/* parameter is relative offset */
+#define	FC_FC_RES2	(1 << 2)	/* reserved */
+#define	FC_FC_FILL(i)	((i) & 3)	/* 1:0: bytes of trailing fill */
+
+/*
+ * BA_ACC payload.
+ */
+struct fc_ba_acc {
+	__u8		ba_seq_id_val;	/* SEQ_ID validity */
+#define FC_BA_SEQ_ID_VAL 0x80
+	__u8		ba_seq_id;	/* SEQ_ID of seq last deliverable */
+	__u8		ba_resvd[2];	/* reserved */
+	__be16		ba_ox_id;	/* OX_ID for aborted seq or exch */
+	__be16		ba_rx_id;	/* RX_ID for aborted seq or exch */
+	__be16		ba_low_seq_cnt;	/* low SEQ_CNT of aborted seq */
+	__be16		ba_high_seq_cnt; /* high SEQ_CNT of aborted seq */
+};
+
+/*
+ * BA_RJT: Basic Reject payload.
+ */
+struct fc_ba_rjt {
+	__u8		br_resvd;	/* reserved */
+	__u8		br_reason;	/* reason code */
+	__u8		br_explan;	/* reason explanation */
+	__u8		br_vendor;	/* vendor unique code */
+};
+
+/*
+ * BA_RJT reason codes.
+ * From FS-2.
+ */
+enum fc_ba_rjt_reason {
+	FC_BA_RJT_NONE =	0,	/* in software this means no reject */
+	FC_BA_RJT_INVL_CMD =	0x01,	/* invalid command code */
+	FC_BA_RJT_LOG_ERR =	0x03,	/* logical error */
+	FC_BA_RJT_LOG_BUSY =	0x05,	/* logical busy */
+	FC_BA_RJT_PROTO_ERR =	0x07,	/* protocol error */
+	FC_BA_RJT_UNABLE =	0x09,	/* unable to perform request */
+	FC_BA_RJT_VENDOR =	0xff,	/* vendor-specific (see br_vendor) */
+};
+
+/*
+ * BA_RJT reason code explanations.
+ */
+enum fc_ba_rjt_explan {
+	FC_BA_RJT_EXP_NONE =	0x00,	/* no additional expanation */
+	FC_BA_RJT_INV_XID =	0x03,	/* invalid OX_ID-RX_ID combination */
+	FC_BA_RJT_ABT =		0x05,	/* sequence aborted, no seq info */
+};
+
+/*
+ * P_RJT or F_RJT: Port Reject or Fabric Reject parameter field.
+ */
+struct fc_pf_rjt {
+	__u8		rj_action;	/* reserved */
+	__u8		rj_reason;	/* reason code */
+	__u8		rj_resvd;	/* reserved */
+	__u8		rj_vendor;	/* vendor unique code */
+};
+
+/*
+ * P_RJT and F_RJT reject reason codes.
+ */
+enum fc_pf_rjt_reason {
+	FC_RJT_NONE =		0,	/* non-reject (reserved by standard) */
+	FC_RJT_INVL_DID =	0x01,	/* invalid destination ID */
+	FC_RJT_INVL_SID =	0x02,	/* invalid source ID */
+	FC_RJT_P_UNAV_T =	0x03,	/* port unavailable, temporary */
+	FC_RJT_P_UNAV =		0x04,	/* port unavailable, permanent */
+	FC_RJT_CLS_UNSUP =	0x05,	/* class not supported */
+	FC_RJT_DEL_USAGE =	0x06,	/* delimiter usage error */
+	FC_RJT_TYPE_UNSUP =	0x07,	/* type not supported */
+	FC_RJT_LINK_CTL =	0x08,	/* invalid link control */
+	FC_RJT_R_CTL =		0x09,	/* invalid R_CTL field */
+	FC_RJT_F_CTL =		0x0a,	/* invalid F_CTL field */
+	FC_RJT_OX_ID =		0x0b,	/* invalid originator exchange ID */
+	FC_RJT_RX_ID =		0x0c,	/* invalid responder exchange ID */
+	FC_RJT_SEQ_ID =		0x0d,	/* invalid sequence ID */
+	FC_RJT_DF_CTL =		0x0e,	/* invalid DF_CTL field */
+	FC_RJT_SEQ_CNT =	0x0f,	/* invalid SEQ_CNT field */
+	FC_RJT_PARAM =		0x10,	/* invalid parameter field */
+	FC_RJT_EXCH_ERR =	0x11,	/* exchange error */
+	FC_RJT_PROTO =		0x12,	/* protocol error */
+	FC_RJT_LEN =		0x13,	/* incorrect length */
+	FC_RJT_UNEXP_ACK =	0x14,	/* unexpected ACK */
+	FC_RJT_FAB_CLASS =	0x15,	/* class unsupported by fabric entity */
+	FC_RJT_LOGI_REQ =	0x16,	/* login required */
+	FC_RJT_SEQ_XS =		0x17,	/* excessive sequences attempted */
+	FC_RJT_EXCH_EST =	0x18,	/* unable to establish exchange */
+	FC_RJT_FAB_UNAV =	0x1a,	/* fabric unavailable */
+	FC_RJT_VC_ID =		0x1b,	/* invalid VC_ID (class 4) */
+	FC_RJT_CS_CTL =		0x1c,	/* invalid CS_CTL field */
+	FC_RJT_INSUF_RES =	0x1d,	/* insuff. resources for VC (Class 4) */
+	FC_RJT_INVL_CLS =	0x1f,	/* invalid class of service */
+	FC_RJT_PREEMT_RJT =	0x20,	/* preemption request rejected */
+	FC_RJT_PREEMT_DIS =	0x21,	/* preemption not enabled */
+	FC_RJT_MCAST_ERR =	0x22,	/* multicast error */
+	FC_RJT_MCAST_ET =	0x23,	/* multicast error terminate */
+	FC_RJT_PRLI_REQ =	0x24,	/* process login required */
+	FC_RJT_INVL_ATT =	0x25,	/* invalid attachment */
+	FC_RJT_VENDOR =		0xff,	/* vendor specific reject */
+};
+
+/* default timeout values */
+
+#define FC_DEF_E_D_TOV	2000UL
+#define FC_DEF_R_A_TOV	10000UL
+
+#endif /* _FC_FS_H_ */
diff --git a/include/scsi/fc/fc_gs.h b/include/scsi/fc/fc_gs.h
new file mode 100644
index 00000000..a37346d4
--- /dev/null
+++ b/include/scsi/fc/fc_gs.h
@@ -0,0 +1,96 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_GS_H_
+#define	_FC_GS_H_
+
+#include <linux/types.h>
+
+/*
+ * Fibre Channel Services - Common Transport.
+ * From T11.org FC-GS-2 Rev 5.3 November 1998.
+ */
+
+struct fc_ct_hdr {
+	__u8		ct_rev;		/* revision */
+	__u8		ct_in_id[3];	/* N_Port ID of original requestor */
+	__u8		ct_fs_type;	/* type of fibre channel service */
+	__u8		ct_fs_subtype;	/* subtype */
+	__u8		ct_options;
+	__u8		_ct_resvd1;
+	__be16		ct_cmd;		/* command / response code */
+	__be16		ct_mr_size;	/* maximum / residual size */
+	__u8		_ct_resvd2;
+	__u8		ct_reason;	/* reject reason */
+	__u8		ct_explan;	/* reason code explanation */
+	__u8		ct_vendor;	/* vendor unique data */
+};
+
+#define	FC_CT_HDR_LEN	16	/* expected sizeof (struct fc_ct_hdr) */
+
+enum fc_ct_rev {
+	FC_CT_REV = 1		/* common transport revision */
+};
+
+/*
+ * ct_fs_type values.
+ */
+enum fc_ct_fs_type {
+	FC_FST_ALIAS =	0xf8,	/* alias service */
+	FC_FST_MGMT =	0xfa,	/* management service */
+	FC_FST_TIME =	0xfb,	/* time service */
+	FC_FST_DIR =	0xfc,	/* directory service */
+};
+
+/*
+ * ct_cmd: Command / response codes
+ */
+enum fc_ct_cmd {
+	FC_FS_RJT =	0x8001,	/* reject */
+	FC_FS_ACC =	0x8002,	/* accept */
+};
+
+/*
+ * FS_RJT reason codes.
+ */
+enum fc_ct_reason {
+	FC_FS_RJT_CMD =		0x01,	/* invalid command code */
+	FC_FS_RJT_VER =		0x02,	/* invalid version level */
+	FC_FS_RJT_LOG =		0x03,	/* logical error */
+	FC_FS_RJT_IUSIZ =	0x04,	/* invalid IU size */
+	FC_FS_RJT_BSY =		0x05,	/* logical busy */
+	FC_FS_RJT_PROTO =	0x07,	/* protocol error */
+	FC_FS_RJT_UNABL =	0x09,	/* unable to perform command request */
+	FC_FS_RJT_UNSUP =	0x0b,	/* command not supported */
+};
+
+/*
+ * FS_RJT reason code explanations.
+ */
+enum fc_ct_explan {
+	FC_FS_EXP_NONE =	0x00,	/* no additional explanation */
+	FC_FS_EXP_PID =		0x01,	/* port ID not registered */
+	FC_FS_EXP_PNAM =	0x02,	/* port name not registered */
+	FC_FS_EXP_NNAM =	0x03,	/* node name not registered */
+	FC_FS_EXP_COS =		0x04,	/* class of service not registered */
+	FC_FS_EXP_FTNR =	0x07,	/* FC-4 types not registered */
+	/* definitions not complete */
+};
+
+#endif /* _FC_GS_H_ */
diff --git a/include/scsi/fc/fc_ms.h b/include/scsi/fc/fc_ms.h
new file mode 100644
index 00000000..f52b921b
--- /dev/null
+++ b/include/scsi/fc/fc_ms.h
@@ -0,0 +1,213 @@
+/* * Copyright(c) 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_MS_H_
+#define	_FC_MS_H_
+
+#include <linux/types.h>
+
+/*
+ * Fibre Channel Services - Management Service (MS)
+ * From T11.org FC-GS-4 Rev 7.91 February 4, 2004
+ */
+
+/*
+ * Fabric Device Management Interface
+ */
+
+/*
+ * Common-transport sub-type for FDMI
+ */
+#define	FC_FDMI_SUBTYPE	    0x10 /* fs_ct_hdr.ct_fs_subtype */
+
+/*
+ * Management server FDMI Requests.
+ */
+enum fc_fdmi_req {
+	FC_FDMI_GRHL = 0x0100,	/* Get Registered HBA List */
+	FC_FDMI_GHAT = 0x0101,	/* Get HBA Attributes */
+	FC_FDMI_GRPL = 0x0102,	/* Get Registered Port List */
+	FC_FDMI_GPAT = 0x0110,	/* Get Port Attributes */
+	FC_FDMI_RHBA = 0x0200,	/* Register HBA */
+	FC_FDMI_RHAT = 0x0201,	/* Register HBA Attributes */
+	FC_FDMI_RPRT = 0x0210,	/* Register Port */
+	FC_FDMI_RPA = 0x0211,	/* Register Port Attributes */
+	FC_FDMI_DHBA = 0x0300,	/* Deregister HBA */
+	FC_FDMI_DHAT = 0x0301,	/* Deregister HBA Attributes */
+	FC_FDMI_DPRT = 0x0310,	/* Deregister Port */
+	FC_FDMI_DPA = 0x0311,	/* Deregister Port Attributes */
+};
+
+/*
+ * HBA Attribute Entry Type
+ */
+enum fc_fdmi_hba_attr_type {
+	FC_FDMI_HBA_ATTR_NODENAME = 0x0001,
+	FC_FDMI_HBA_ATTR_MANUFACTURER = 0x0002,
+	FC_FDMI_HBA_ATTR_SERIALNUMBER = 0x0003,
+	FC_FDMI_HBA_ATTR_MODEL = 0x0004,
+	FC_FDMI_HBA_ATTR_MODELDESCRIPTION = 0x0005,
+	FC_FDMI_HBA_ATTR_HARDWAREVERSION = 0x0006,
+	FC_FDMI_HBA_ATTR_DRIVERVERSION = 0x0007,
+	FC_FDMI_HBA_ATTR_OPTIONROMVERSION = 0x0008,
+	FC_FDMI_HBA_ATTR_FIRMWAREVERSION = 0x0009,
+	FC_FDMI_HBA_ATTR_OSNAMEVERSION = 0x000A,
+	FC_FDMI_HBA_ATTR_MAXCTPAYLOAD = 0x000B,
+};
+
+/*
+ * HBA Attribute Length
+ */
+#define FC_FDMI_HBA_ATTR_NODENAME_LEN		8
+#define FC_FDMI_HBA_ATTR_MANUFACTURER_LEN	64
+#define FC_FDMI_HBA_ATTR_SERIALNUMBER_LEN	64
+#define FC_FDMI_HBA_ATTR_MODEL_LEN		256
+#define FC_FDMI_HBA_ATTR_MODELDESCR_LEN		256
+#define FC_FDMI_HBA_ATTR_HARDWAREVERSION_LEN	256
+#define FC_FDMI_HBA_ATTR_DRIVERVERSION_LEN	256
+#define FC_FDMI_HBA_ATTR_OPTIONROMVERSION_LEN	256
+#define FC_FDMI_HBA_ATTR_FIRMWAREVERSION_LEN	256
+#define FC_FDMI_HBA_ATTR_OSNAMEVERSION_LEN	256
+#define FC_FDMI_HBA_ATTR_MAXCTPAYLOAD_LEN	4
+
+/*
+ * Port Attribute Type
+ */
+enum fc_fdmi_port_attr_type {
+	FC_FDMI_PORT_ATTR_FC4TYPES = 0x0001,
+	FC_FDMI_PORT_ATTR_SUPPORTEDSPEED = 0x0002,
+	FC_FDMI_PORT_ATTR_CURRENTPORTSPEED = 0x0003,
+	FC_FDMI_PORT_ATTR_MAXFRAMESIZE = 0x0004,
+	FC_FDMI_PORT_ATTR_OSDEVICENAME = 0x0005,
+	FC_FDMI_PORT_ATTR_HOSTNAME = 0x0006,
+};
+
+/*
+ * Port Attribute Length
+ */
+#define FC_FDMI_PORT_ATTR_FC4TYPES_LEN		32
+#define FC_FDMI_PORT_ATTR_SUPPORTEDSPEED_LEN	4
+#define FC_FDMI_PORT_ATTR_CURRENTPORTSPEED_LEN	4
+#define FC_FDMI_PORT_ATTR_MAXFRAMESIZE_LEN	4
+#define FC_FDMI_PORT_ATTR_OSDEVICENAME_LEN	256
+#define FC_FDMI_PORT_ATTR_HOSTNAME_LEN		256
+
+/*
+ * HBA Attribute ID
+ */
+struct fc_fdmi_hba_identifier {
+	__be64		id;
+};
+
+/*
+ * Port Name
+ */
+struct fc_fdmi_port_name {
+	__be64		portname;
+};
+
+/*
+ * Attribute Entry Block for HBA/Port Attributes
+ */
+#define FC_FDMI_ATTR_ENTRY_HEADER_LEN	4
+struct fc_fdmi_attr_entry {
+	__be16		type;
+	__be16		len;
+	__u8		value[1];
+} __attribute__((__packed__));
+
+/*
+ * Common for HBA/Port Attributes
+ */
+struct fs_fdmi_attrs {
+	__be32				numattrs;
+	struct fc_fdmi_attr_entry	attr[1];
+} __attribute__((__packed__));
+
+/*
+ * Registered Port List
+ */
+struct fc_fdmi_rpl {
+	__be32				numport;
+	struct fc_fdmi_port_name	port[1];
+} __attribute__((__packed__));
+
+/*
+ * Register HBA (RHBA)
+ */
+struct fc_fdmi_rhba {
+	struct fc_fdmi_hba_identifier hbaid;
+	struct fc_fdmi_rpl		 port;
+	struct fs_fdmi_attrs		 hba_attrs;
+} __attribute__((__packed__));
+
+/*
+ * Register HBA Attributes (RHAT)
+ */
+struct fc_fdmi_rhat {
+	struct fc_fdmi_hba_identifier hbaid;
+	struct fs_fdmi_attrs		 hba_attrs;
+} __attribute__((__packed__));
+
+/*
+ * Register Port (RPRT)
+ */
+struct fc_fdmi_rprt {
+	struct fc_fdmi_hba_identifier hbaid;
+	struct fc_fdmi_port_name	 port;
+	struct fs_fdmi_attrs		 hba_attrs;
+} __attribute__((__packed__));
+
+/*
+ * Register Port Attributes (RPA)
+ */
+struct fc_fdmi_rpa {
+	struct fc_fdmi_port_name	 port;
+	struct fs_fdmi_attrs		 hba_attrs;
+} __attribute__((__packed__));
+
+/*
+ * Deregister Port (DPRT)
+ */
+struct fc_fdmi_dprt {
+	struct fc_fdmi_port_name	 port;
+} __attribute__((__packed__));
+
+/*
+ * Deregister Port Attributes (DPA)
+ */
+struct fc_fdmi_dpa {
+	struct fc_fdmi_port_name	 port;
+	struct fs_fdmi_attrs		 hba_attrs;
+} __attribute__((__packed__));
+
+/*
+ * Deregister HBA Attributes (DHAT)
+ */
+struct fc_fdmi_dhat {
+	struct fc_fdmi_hba_identifier hbaid;
+} __attribute__((__packed__));
+
+/*
+ * Deregister HBA (DHBA)
+ */
+struct fc_fdmi_dhba {
+	struct fc_fdmi_hba_identifier hbaid;
+} __attribute__((__packed__));
+
+#endif /* _FC_MS_H_ */
diff --git a/include/scsi/fc/fc_ns.h b/include/scsi/fc/fc_ns.h
new file mode 100644
index 00000000..f7751d53
--- /dev/null
+++ b/include/scsi/fc/fc_ns.h
@@ -0,0 +1,208 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_NS_H_
+#define	_FC_NS_H_
+
+#include <linux/types.h>
+
+/*
+ * Fibre Channel Services - Name Service (dNS)
+ * From T11.org FC-GS-2 Rev 5.3 November 1998.
+ */
+
+/*
+ * Common-transport sub-type for Name Server.
+ */
+#define	FC_NS_SUBTYPE	    2	/* fs_ct_hdr.ct_fs_subtype */
+
+/*
+ * Name server Requests.
+ * Note:  this is an incomplete list, some unused requests are omitted.
+ */
+enum fc_ns_req {
+	FC_NS_GA_NXT =	0x0100,		/* get all next */
+	FC_NS_GI_A =	0x0101,		/* get identifiers - scope */
+	FC_NS_GPN_ID =	0x0112,		/* get port name by ID */
+	FC_NS_GNN_ID =	0x0113,		/* get node name by ID */
+	FC_NS_GSPN_ID = 0x0118,		/* get symbolic port name */
+	FC_NS_GID_PN =	0x0121,		/* get ID for port name */
+	FC_NS_GID_NN =	0x0131,		/* get IDs for node name */
+	FC_NS_GID_FT =	0x0171,		/* get IDs by FC4 type */
+	FC_NS_GPN_FT =	0x0172,		/* get port names by FC4 type */
+	FC_NS_GID_PT =	0x01a1,		/* get IDs by port type */
+	FC_NS_RPN_ID =	0x0212,		/* reg port name for ID */
+	FC_NS_RNN_ID =	0x0213,		/* reg node name for ID */
+	FC_NS_RFT_ID =	0x0217,		/* reg FC4 type for ID */
+	FC_NS_RSPN_ID =	0x0218,		/* reg symbolic port name */
+	FC_NS_RFF_ID =	0x021f,		/* reg FC4 Features for ID */
+	FC_NS_RSNN_NN =	0x0239,		/* reg symbolic node name */
+};
+
+/*
+ * Port type values.
+ */
+enum fc_ns_pt {
+	FC_NS_UNID_PORT = 0x00,	/* unidentified */
+	FC_NS_N_PORT =	0x01,	/* N port */
+	FC_NS_NL_PORT =	0x02,	/* NL port */
+	FC_NS_FNL_PORT = 0x03,	/* F/NL port */
+	FC_NS_NX_PORT =	0x7f,	/* Nx port */
+	FC_NS_F_PORT =	0x81,	/* F port */
+	FC_NS_FL_PORT =	0x82,	/* FL port */
+	FC_NS_E_PORT =	0x84,	/* E port */
+	FC_NS_B_PORT =	0x85,	/* B port */
+};
+
+/*
+ * Port type object.
+ */
+struct fc_ns_pt_obj {
+	__u8		pt_type;
+};
+
+/*
+ * Port ID object
+ */
+struct fc_ns_fid {
+	__u8		fp_flags;	/* flags for responses only */
+	__u8		fp_fid[3];
+};
+
+/*
+ * fp_flags in port ID object, for responses only.
+ */
+#define	FC_NS_FID_LAST	0x80		/* last object */
+
+/*
+ * FC4-types object.
+ */
+#define	FC_NS_TYPES	256	/* number of possible FC-4 types */
+#define	FC_NS_BPW	32	/* bits per word in bitmap */
+
+struct fc_ns_fts {
+	__be32	ff_type_map[FC_NS_TYPES / FC_NS_BPW]; /* bitmap of FC-4 types */
+};
+
+/*
+ * FC4-features object.
+ */
+struct fc_ns_ff	{
+	__be32	fd_feat[FC_NS_TYPES * 4 / FC_NS_BPW]; /* 4-bits per FC-type */
+};
+
+/*
+ * GID_PT request.
+ */
+struct fc_ns_gid_pt {
+	__u8		fn_pt_type;
+	__u8		fn_domain_id_scope;
+	__u8		fn_area_id_scope;
+	__u8		fn_resvd;
+};
+
+/*
+ * GID_FT or GPN_FT request.
+ */
+struct fc_ns_gid_ft {
+	__u8		fn_resvd;
+	__u8		fn_domain_id_scope;
+	__u8		fn_area_id_scope;
+	__u8		fn_fc4_type;
+};
+
+/*
+ * GPN_FT response.
+ */
+struct fc_gpn_ft_resp {
+	__u8		fp_flags;	/* see fp_flags definitions above */
+	__u8		fp_fid[3];	/* port ID */
+	__be32		fp_resvd;
+	__be64		fp_wwpn;	/* port name */
+};
+
+/*
+ * GID_PN request
+ */
+struct fc_ns_gid_pn {
+	__be64     fn_wwpn;    /* port name */
+};
+
+/*
+ * GID_PN response or GSPN_ID request
+ */
+struct fc_gid_pn_resp {
+	__u8      fp_resvd;
+	__u8      fp_fid[3];     /* port ID */
+};
+
+/*
+ * GSPN_ID response
+ */
+struct fc_gspn_resp {
+	__u8	fp_name_len;
+	char	fp_name[];
+};
+
+/*
+ * RFT_ID request - register FC-4 types for ID.
+ */
+struct fc_ns_rft_id {
+	struct fc_ns_fid fr_fid;	/* port ID object */
+	struct fc_ns_fts fr_fts;	/* FC-4 types object */
+};
+
+/*
+ * RPN_ID request - register port name for ID.
+ * RNN_ID request - register node name for ID.
+ */
+struct fc_ns_rn_id {
+	struct fc_ns_fid fr_fid;	/* port ID object */
+	__be64		fr_wwn;		/* node name or port name */
+} __attribute__((__packed__));
+
+/*
+ * RSNN_NN request - register symbolic node name
+ */
+struct fc_ns_rsnn {
+	__be64		fr_wwn;		/* node name */
+	__u8		fr_name_len;
+	char		fr_name[];
+} __attribute__((__packed__));
+
+/*
+ * RSPN_ID request - register symbolic port name
+ */
+struct fc_ns_rspn {
+	struct fc_ns_fid fr_fid;	/* port ID object */
+	__u8		fr_name_len;
+	char		fr_name[];
+} __attribute__((__packed__));
+
+/*
+ * RFF_ID request - register FC-4 Features for ID.
+ */
+struct fc_ns_rff_id {
+	struct fc_ns_fid fr_fid;	/* port ID object */
+	__u8		fr_resvd[2];
+	__u8		fr_feat;	/* FC-4 Feature bits */
+	__u8		fr_type;	/* FC-4 type */
+} __attribute__((__packed__));
+
+#endif /* _FC_NS_H_ */
diff --git a/include/scsi/fc_encode.h b/include/scsi/fc_encode.h
new file mode 100644
index 00000000..35fd4744
--- /dev/null
+++ b/include/scsi/fc_encode.h
@@ -0,0 +1,739 @@
+/*
+ * Copyright(c) 2008 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_ENCODE_H_
+#define _FC_ENCODE_H_
+#include <asm/unaligned.h>
+#include <linux/utsname.h>
+
+/*
+ * F_CTL values for simple requests and responses.
+ */
+#define FC_FCTL_REQ	(FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT)
+#define FC_FCTL_RESP	(FC_FC_EX_CTX | FC_FC_LAST_SEQ | \
+			FC_FC_END_SEQ | FC_FC_SEQ_INIT)
+
+struct fc_ns_rft {
+	struct fc_ns_fid fid;	/* port ID object */
+	struct fc_ns_fts fts;	/* FC4-types object */
+};
+
+struct fc_ct_req {
+	struct fc_ct_hdr hdr;
+	union {
+		struct fc_ns_gid_ft gid;
+		struct fc_ns_rn_id  rn;
+		struct fc_ns_rft rft;
+		struct fc_ns_rff_id rff;
+		struct fc_ns_fid fid;
+		struct fc_ns_rsnn snn;
+		struct fc_ns_rspn spn;
+		struct fc_fdmi_rhba rhba;
+		struct fc_fdmi_rpa  rpa;
+		struct fc_fdmi_dprt dprt;
+		struct fc_fdmi_dhba dhba;
+	} payload;
+};
+
+static inline void __fc_fill_fc_hdr(struct fc_frame_header *fh,
+				    enum fc_rctl r_ctl,
+				    u32 did, u32 sid, enum fc_fh_type type,
+				    u32 f_ctl, u32 parm_offset)
+{
+	WARN_ON(r_ctl == 0);
+	fh->fh_r_ctl = r_ctl;
+	hton24(fh->fh_d_id, did);
+	hton24(fh->fh_s_id, sid);
+	fh->fh_type = type;
+	hton24(fh->fh_f_ctl, f_ctl);
+	fh->fh_cs_ctl = 0;
+	fh->fh_df_ctl = 0;
+	fh->fh_parm_offset = htonl(parm_offset);
+}
+
+/**
+ * fill FC header fields in specified fc_frame
+ */
+static inline void fc_fill_fc_hdr(struct fc_frame *fp, enum fc_rctl r_ctl,
+				  u32 did, u32 sid, enum fc_fh_type type,
+				  u32 f_ctl, u32 parm_offset)
+{
+	struct fc_frame_header *fh;
+
+	fh = fc_frame_header_get(fp);
+	__fc_fill_fc_hdr(fh, r_ctl, did, sid, type, f_ctl, parm_offset);
+}
+
+/**
+ * fc_adisc_fill() - Fill in adisc request frame
+ * @lport: local port.
+ * @fp: fc frame where payload will be placed.
+ */
+static inline void fc_adisc_fill(struct fc_lport *lport, struct fc_frame *fp)
+{
+	struct fc_els_adisc *adisc;
+
+	adisc = fc_frame_payload_get(fp, sizeof(*adisc));
+	memset(adisc, 0, sizeof(*adisc));
+	adisc->adisc_cmd = ELS_ADISC;
+	put_unaligned_be64(lport->wwpn, &adisc->adisc_wwpn);
+	put_unaligned_be64(lport->wwnn, &adisc->adisc_wwnn);
+	hton24(adisc->adisc_port_id, lport->port_id);
+}
+
+/**
+ * fc_ct_hdr_fill- fills ct header and reset ct payload
+ * returns pointer to ct request.
+ */
+static inline struct fc_ct_req *fc_ct_hdr_fill(const struct fc_frame *fp,
+					       unsigned int op, size_t req_size,
+					       enum fc_ct_fs_type fs_type,
+					       u8 subtype)
+{
+	struct fc_ct_req *ct;
+	size_t ct_plen;
+
+	ct_plen  = sizeof(struct fc_ct_hdr) + req_size;
+	ct = fc_frame_payload_get(fp, ct_plen);
+	memset(ct, 0, ct_plen);
+	ct->hdr.ct_rev = FC_CT_REV;
+	ct->hdr.ct_fs_type = fs_type;
+	ct->hdr.ct_fs_subtype = subtype;
+	ct->hdr.ct_cmd = htons((u16) op);
+	return ct;
+}
+
+/**
+ * fc_ct_ns_fill() - Fill in a name service request frame
+ * @lport: local port.
+ * @fc_id: FC_ID of non-destination rport for GPN_ID and similar inquiries.
+ * @fp: frame to contain payload.
+ * @op: CT opcode.
+ * @r_ctl: pointer to FC header R_CTL.
+ * @fh_type: pointer to FC-4 type.
+ */
+static inline int fc_ct_ns_fill(struct fc_lport *lport,
+		      u32 fc_id, struct fc_frame *fp,
+		      unsigned int op, enum fc_rctl *r_ctl,
+		      enum fc_fh_type *fh_type)
+{
+	struct fc_ct_req *ct;
+	size_t len;
+
+	switch (op) {
+	case FC_NS_GPN_FT:
+		ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_gid_ft),
+				    FC_FST_DIR, FC_NS_SUBTYPE);
+		ct->payload.gid.fn_fc4_type = FC_TYPE_FCP;
+		break;
+
+	case FC_NS_GPN_ID:
+		ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_fid),
+				    FC_FST_DIR, FC_NS_SUBTYPE);
+		ct->payload.gid.fn_fc4_type = FC_TYPE_FCP;
+		hton24(ct->payload.fid.fp_fid, fc_id);
+		break;
+
+	case FC_NS_RFT_ID:
+		ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rft),
+				    FC_FST_DIR, FC_NS_SUBTYPE);
+		hton24(ct->payload.rft.fid.fp_fid, lport->port_id);
+		ct->payload.rft.fts = lport->fcts;
+		break;
+
+	case FC_NS_RFF_ID:
+		ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rff_id),
+				    FC_FST_DIR, FC_NS_SUBTYPE);
+		hton24(ct->payload.rff.fr_fid.fp_fid, lport->port_id);
+		ct->payload.rff.fr_type = FC_TYPE_FCP;
+		if (lport->service_params & FCP_SPPF_INIT_FCN)
+			ct->payload.rff.fr_feat = FCP_FEAT_INIT;
+		if (lport->service_params & FCP_SPPF_TARG_FCN)
+			ct->payload.rff.fr_feat |= FCP_FEAT_TARG;
+		break;
+
+	case FC_NS_RNN_ID:
+		ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rn_id),
+				    FC_FST_DIR, FC_NS_SUBTYPE);
+		hton24(ct->payload.rn.fr_fid.fp_fid, lport->port_id);
+		put_unaligned_be64(lport->wwnn, &ct->payload.rn.fr_wwn);
+		break;
+
+	case FC_NS_RSPN_ID:
+		len = strnlen(fc_host_symbolic_name(lport->host), 255);
+		ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rspn) + len,
+				    FC_FST_DIR, FC_NS_SUBTYPE);
+		hton24(ct->payload.spn.fr_fid.fp_fid, lport->port_id);
+		strncpy(ct->payload.spn.fr_name,
+			fc_host_symbolic_name(lport->host), len);
+		ct->payload.spn.fr_name_len = len;
+		break;
+
+	case FC_NS_RSNN_NN:
+		len = strnlen(fc_host_symbolic_name(lport->host), 255);
+		ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rsnn) + len,
+				    FC_FST_DIR, FC_NS_SUBTYPE);
+		put_unaligned_be64(lport->wwnn, &ct->payload.snn.fr_wwn);
+		strncpy(ct->payload.snn.fr_name,
+			fc_host_symbolic_name(lport->host), len);
+		ct->payload.snn.fr_name_len = len;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+	*r_ctl = FC_RCTL_DD_UNSOL_CTL;
+	*fh_type = FC_TYPE_CT;
+	return 0;
+}
+
+/**
+ * fc_ct_ms_fill() - Fill in a mgmt service request frame
+ * @lport: local port.
+ * @fc_id: FC_ID of non-destination rport for GPN_ID and similar inquiries.
+ * @fp: frame to contain payload.
+ * @op: CT opcode.
+ * @r_ctl: pointer to FC header R_CTL.
+ * @fh_type: pointer to FC-4 type.
+ */
+static inline int fc_ct_ms_fill(struct fc_lport *lport,
+		      u32 fc_id, struct fc_frame *fp,
+		      unsigned int op, enum fc_rctl *r_ctl,
+		      enum fc_fh_type *fh_type)
+{
+	struct fc_ct_req *ct;
+	size_t len;
+	struct fc_fdmi_attr_entry *entry;
+	struct fs_fdmi_attrs *hba_attrs;
+	int numattrs = 0;
+
+	switch (op) {
+	case FC_FDMI_RHBA:
+		numattrs = 10;
+		len = sizeof(struct fc_fdmi_rhba);
+		len -= sizeof(struct fc_fdmi_attr_entry);
+		len += (numattrs * FC_FDMI_ATTR_ENTRY_HEADER_LEN);
+		len += FC_FDMI_HBA_ATTR_NODENAME_LEN;
+		len += FC_FDMI_HBA_ATTR_MANUFACTURER_LEN;
+		len += FC_FDMI_HBA_ATTR_SERIALNUMBER_LEN;
+		len += FC_FDMI_HBA_ATTR_MODEL_LEN;
+		len += FC_FDMI_HBA_ATTR_MODELDESCR_LEN;
+		len += FC_FDMI_HBA_ATTR_HARDWAREVERSION_LEN;
+		len += FC_FDMI_HBA_ATTR_DRIVERVERSION_LEN;
+		len += FC_FDMI_HBA_ATTR_OPTIONROMVERSION_LEN;
+		len += FC_FDMI_HBA_ATTR_FIRMWAREVERSION_LEN;
+		len += FC_FDMI_HBA_ATTR_OSNAMEVERSION_LEN;
+		ct = fc_ct_hdr_fill(fp, op, len, FC_FST_MGMT,
+				    FC_FDMI_SUBTYPE);
+
+		/* HBA Identifier */
+		put_unaligned_be64(lport->wwpn, &ct->payload.rhba.hbaid.id);
+		/* Number of Ports - always 1 */
+		put_unaligned_be32(1, &ct->payload.rhba.port.numport);
+		/* Port Name */
+		put_unaligned_be64(lport->wwpn,
+				   &ct->payload.rhba.port.port[0].portname);
+
+		/* HBA Attributes */
+		put_unaligned_be32(numattrs,
+				   &ct->payload.rhba.hba_attrs.numattrs);
+		hba_attrs = &ct->payload.rhba.hba_attrs;
+		entry = (struct fc_fdmi_attr_entry *)hba_attrs->attr;
+		/* NodeName*/
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_HBA_ATTR_NODENAME_LEN;
+		put_unaligned_be16(FC_FDMI_HBA_ATTR_NODENAME,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		put_unaligned_be64(lport->wwnn,
+				   (__be64 *)&entry->value[0]);
+
+		/* Manufacturer */
+		entry = (struct fc_fdmi_attr_entry *)((char *)entry->value +
+					FC_FDMI_HBA_ATTR_NODENAME_LEN);
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_HBA_ATTR_MANUFACTURER_LEN;
+		put_unaligned_be16(FC_FDMI_HBA_ATTR_MANUFACTURER,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		strncpy((char *)&entry->value,
+			fc_host_manufacturer(lport->host),
+			FC_FDMI_HBA_ATTR_MANUFACTURER_LEN);
+
+		/* SerialNumber */
+		entry = (struct fc_fdmi_attr_entry *)((char *)entry->value +
+					FC_FDMI_HBA_ATTR_MANUFACTURER_LEN);
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_HBA_ATTR_SERIALNUMBER_LEN;
+		put_unaligned_be16(FC_FDMI_HBA_ATTR_SERIALNUMBER,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		strncpy((char *)&entry->value,
+			fc_host_serial_number(lport->host),
+			FC_FDMI_HBA_ATTR_SERIALNUMBER_LEN);
+
+		/* Model */
+		entry = (struct fc_fdmi_attr_entry *)((char *)entry->value +
+					FC_FDMI_HBA_ATTR_SERIALNUMBER_LEN);
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_HBA_ATTR_MODEL_LEN;
+		put_unaligned_be16(FC_FDMI_HBA_ATTR_MODEL,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		strncpy((char *)&entry->value,
+			fc_host_model(lport->host),
+			FC_FDMI_HBA_ATTR_MODEL_LEN);
+
+		/* Model Description */
+		entry = (struct fc_fdmi_attr_entry *)((char *)entry->value +
+					FC_FDMI_HBA_ATTR_MODEL_LEN);
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_HBA_ATTR_MODELDESCR_LEN;
+		put_unaligned_be16(FC_FDMI_HBA_ATTR_MODELDESCRIPTION,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		strncpy((char *)&entry->value,
+			fc_host_model_description(lport->host),
+			FC_FDMI_HBA_ATTR_MODELDESCR_LEN);
+
+		/* Hardware Version */
+		entry = (struct fc_fdmi_attr_entry *)((char *)entry->value +
+					FC_FDMI_HBA_ATTR_MODELDESCR_LEN);
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_HBA_ATTR_HARDWAREVERSION_LEN;
+		put_unaligned_be16(FC_FDMI_HBA_ATTR_HARDWAREVERSION,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		strncpy((char *)&entry->value,
+			fc_host_hardware_version(lport->host),
+			FC_FDMI_HBA_ATTR_HARDWAREVERSION_LEN);
+
+		/* Driver Version */
+		entry = (struct fc_fdmi_attr_entry *)((char *)entry->value +
+					FC_FDMI_HBA_ATTR_HARDWAREVERSION_LEN);
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_HBA_ATTR_DRIVERVERSION_LEN;
+		put_unaligned_be16(FC_FDMI_HBA_ATTR_DRIVERVERSION,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		strncpy((char *)&entry->value,
+			fc_host_driver_version(lport->host),
+			FC_FDMI_HBA_ATTR_DRIVERVERSION_LEN);
+
+		/* OptionROM Version */
+		entry = (struct fc_fdmi_attr_entry *)((char *)entry->value +
+					FC_FDMI_HBA_ATTR_DRIVERVERSION_LEN);
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_HBA_ATTR_OPTIONROMVERSION_LEN;
+		put_unaligned_be16(FC_FDMI_HBA_ATTR_OPTIONROMVERSION,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		strncpy((char *)&entry->value,
+			fc_host_optionrom_version(lport->host),
+			FC_FDMI_HBA_ATTR_OPTIONROMVERSION_LEN);
+
+		/* Firmware Version */
+		entry = (struct fc_fdmi_attr_entry *)((char *)entry->value +
+					FC_FDMI_HBA_ATTR_OPTIONROMVERSION_LEN);
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_HBA_ATTR_FIRMWAREVERSION_LEN;
+		put_unaligned_be16(FC_FDMI_HBA_ATTR_FIRMWAREVERSION,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		strncpy((char *)&entry->value,
+			fc_host_firmware_version(lport->host),
+			FC_FDMI_HBA_ATTR_FIRMWAREVERSION_LEN);
+
+		/* OS Name and Version */
+		entry = (struct fc_fdmi_attr_entry *)((char *)entry->value +
+					FC_FDMI_HBA_ATTR_FIRMWAREVERSION_LEN);
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_HBA_ATTR_OSNAMEVERSION_LEN;
+		put_unaligned_be16(FC_FDMI_HBA_ATTR_OSNAMEVERSION,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		snprintf((char *)&entry->value,
+			FC_FDMI_HBA_ATTR_OSNAMEVERSION_LEN,
+			"%s v%s",
+			init_utsname()->sysname,
+			init_utsname()->release);
+		break;
+	case FC_FDMI_RPA:
+		numattrs = 6;
+		len = sizeof(struct fc_fdmi_rpa);
+		len -= sizeof(struct fc_fdmi_attr_entry);
+		len += (numattrs * FC_FDMI_ATTR_ENTRY_HEADER_LEN);
+		len += FC_FDMI_PORT_ATTR_FC4TYPES_LEN;
+		len += FC_FDMI_PORT_ATTR_SUPPORTEDSPEED_LEN;
+		len += FC_FDMI_PORT_ATTR_CURRENTPORTSPEED_LEN;
+		len += FC_FDMI_PORT_ATTR_MAXFRAMESIZE_LEN;
+		len += FC_FDMI_PORT_ATTR_OSDEVICENAME_LEN;
+		len += FC_FDMI_PORT_ATTR_HOSTNAME_LEN;
+		ct = fc_ct_hdr_fill(fp, op, len, FC_FST_MGMT,
+				    FC_FDMI_SUBTYPE);
+
+		/* Port Name */
+		put_unaligned_be64(lport->wwpn,
+				   &ct->payload.rpa.port.portname);
+
+		/* Port Attributes */
+		put_unaligned_be32(numattrs,
+				   &ct->payload.rpa.hba_attrs.numattrs);
+
+		hba_attrs = &ct->payload.rpa.hba_attrs;
+		entry = (struct fc_fdmi_attr_entry *)hba_attrs->attr;
+
+		/* FC4 types */
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_PORT_ATTR_FC4TYPES_LEN;
+		put_unaligned_be16(FC_FDMI_PORT_ATTR_FC4TYPES,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		memcpy(&entry->value, fc_host_supported_fc4s(lport->host),
+		       FC_FDMI_PORT_ATTR_FC4TYPES_LEN);
+
+		/* Supported Speed */
+		entry = (struct fc_fdmi_attr_entry *)((char *)entry->value +
+					FC_FDMI_PORT_ATTR_FC4TYPES_LEN);
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_PORT_ATTR_SUPPORTEDSPEED_LEN;
+		put_unaligned_be16(FC_FDMI_PORT_ATTR_SUPPORTEDSPEED,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+
+		put_unaligned_be32(fc_host_supported_speeds(lport->host),
+				   &entry->value);
+
+		/* Current Port Speed */
+		entry = (struct fc_fdmi_attr_entry *)((char *)entry->value +
+					FC_FDMI_PORT_ATTR_SUPPORTEDSPEED_LEN);
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_PORT_ATTR_CURRENTPORTSPEED_LEN;
+		put_unaligned_be16(FC_FDMI_PORT_ATTR_CURRENTPORTSPEED,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		put_unaligned_be32(lport->link_speed,
+				   &entry->value);
+
+		/* Max Frame Size */
+		entry = (struct fc_fdmi_attr_entry *)((char *)entry->value +
+					FC_FDMI_PORT_ATTR_CURRENTPORTSPEED_LEN);
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_PORT_ATTR_MAXFRAMESIZE_LEN;
+		put_unaligned_be16(FC_FDMI_PORT_ATTR_MAXFRAMESIZE,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		put_unaligned_be32(fc_host_maxframe_size(lport->host),
+				   &entry->value);
+
+		/* OS Device Name */
+		entry = (struct fc_fdmi_attr_entry *)((char *)entry->value +
+					FC_FDMI_PORT_ATTR_MAXFRAMESIZE_LEN);
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_PORT_ATTR_OSDEVICENAME_LEN;
+		put_unaligned_be16(FC_FDMI_PORT_ATTR_OSDEVICENAME,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		/* Use the sysfs device name */
+		strncpy((char *)&entry->value,
+			dev_name(&lport->host->shost_gendev),
+			strnlen(dev_name(&lport->host->shost_gendev),
+				FC_FDMI_PORT_ATTR_HOSTNAME_LEN));
+
+		/* Host Name */
+		entry = (struct fc_fdmi_attr_entry *)((char *)entry->value +
+					FC_FDMI_PORT_ATTR_OSDEVICENAME_LEN);
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_PORT_ATTR_HOSTNAME_LEN;
+		put_unaligned_be16(FC_FDMI_PORT_ATTR_HOSTNAME,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		if (strlen(fc_host_system_hostname(lport->host)))
+			strncpy((char *)&entry->value,
+				fc_host_system_hostname(lport->host),
+				strnlen(fc_host_system_hostname(lport->host),
+					FC_FDMI_PORT_ATTR_HOSTNAME_LEN));
+		else
+			strncpy((char *)&entry->value,
+				init_utsname()->nodename,
+				FC_FDMI_PORT_ATTR_HOSTNAME_LEN);
+		break;
+	case FC_FDMI_DPRT:
+		len = sizeof(struct fc_fdmi_dprt);
+		ct = fc_ct_hdr_fill(fp, op, len, FC_FST_MGMT,
+				    FC_FDMI_SUBTYPE);
+		/* Port Name */
+		put_unaligned_be64(lport->wwpn,
+				   &ct->payload.dprt.port.portname);
+		break;
+	case FC_FDMI_DHBA:
+		len = sizeof(struct fc_fdmi_dhba);
+		ct = fc_ct_hdr_fill(fp, op, len, FC_FST_MGMT,
+				    FC_FDMI_SUBTYPE);
+		/* HBA Identifier */
+		put_unaligned_be64(lport->wwpn, &ct->payload.dhba.hbaid.id);
+		break;
+	default:
+		return -EINVAL;
+	}
+	*r_ctl = FC_RCTL_DD_UNSOL_CTL;
+	*fh_type = FC_TYPE_CT;
+	return 0;
+}
+
+/**
+ * fc_ct_fill() - Fill in a common transport service request frame
+ * @lport: local port.
+ * @fc_id: FC_ID of non-destination rport for GPN_ID and similar inquiries.
+ * @fp: frame to contain payload.
+ * @op: CT opcode.
+ * @r_ctl: pointer to FC header R_CTL.
+ * @fh_type: pointer to FC-4 type.
+ */
+static inline int fc_ct_fill(struct fc_lport *lport,
+		      u32 fc_id, struct fc_frame *fp,
+		      unsigned int op, enum fc_rctl *r_ctl,
+		      enum fc_fh_type *fh_type, u32 *did)
+{
+	int rc = -EINVAL;
+
+	switch (fc_id) {
+	case FC_FID_MGMT_SERV:
+		rc = fc_ct_ms_fill(lport, fc_id, fp, op, r_ctl, fh_type);
+		*did = FC_FID_MGMT_SERV;
+		break;
+	case FC_FID_DIR_SERV:
+	default:
+		rc = fc_ct_ns_fill(lport, fc_id, fp, op, r_ctl, fh_type);
+		*did = FC_FID_DIR_SERV;
+		break;
+	}
+
+	return rc;
+}
+/**
+ * fc_plogi_fill - Fill in plogi request frame
+ */
+static inline void fc_plogi_fill(struct fc_lport *lport, struct fc_frame *fp,
+				 unsigned int op)
+{
+	struct fc_els_flogi *plogi;
+	struct fc_els_csp *csp;
+	struct fc_els_cssp *cp;
+
+	plogi = fc_frame_payload_get(fp, sizeof(*plogi));
+	memset(plogi, 0, sizeof(*plogi));
+	plogi->fl_cmd = (u8) op;
+	put_unaligned_be64(lport->wwpn, &plogi->fl_wwpn);
+	put_unaligned_be64(lport->wwnn, &plogi->fl_wwnn);
+
+	csp = &plogi->fl_csp;
+	csp->sp_hi_ver = 0x20;
+	csp->sp_lo_ver = 0x20;
+	csp->sp_bb_cred = htons(10);	/* this gets set by gateway */
+	csp->sp_bb_data = htons((u16) lport->mfs);
+	cp = &plogi->fl_cssp[3 - 1];	/* class 3 parameters */
+	cp->cp_class = htons(FC_CPC_VALID | FC_CPC_SEQ);
+	csp->sp_features = htons(FC_SP_FT_CIRO);
+	csp->sp_tot_seq = htons(255);	/* seq. we accept */
+	csp->sp_rel_off = htons(0x1f);
+	csp->sp_e_d_tov = htonl(lport->e_d_tov);
+
+	cp->cp_rdfs = htons((u16) lport->mfs);
+	cp->cp_con_seq = htons(255);
+	cp->cp_open_seq = 1;
+}
+
+/**
+ * fc_flogi_fill - Fill in a flogi request frame.
+ */
+static inline void fc_flogi_fill(struct fc_lport *lport, struct fc_frame *fp)
+{
+	struct fc_els_csp *sp;
+	struct fc_els_cssp *cp;
+	struct fc_els_flogi *flogi;
+
+	flogi = fc_frame_payload_get(fp, sizeof(*flogi));
+	memset(flogi, 0, sizeof(*flogi));
+	flogi->fl_cmd = (u8) ELS_FLOGI;
+	put_unaligned_be64(lport->wwpn, &flogi->fl_wwpn);
+	put_unaligned_be64(lport->wwnn, &flogi->fl_wwnn);
+	sp = &flogi->fl_csp;
+	sp->sp_hi_ver = 0x20;
+	sp->sp_lo_ver = 0x20;
+	sp->sp_bb_cred = htons(10);	/* this gets set by gateway */
+	sp->sp_bb_data = htons((u16) lport->mfs);
+	cp = &flogi->fl_cssp[3 - 1];	/* class 3 parameters */
+	cp->cp_class = htons(FC_CPC_VALID | FC_CPC_SEQ);
+	if (lport->does_npiv)
+		sp->sp_features = htons(FC_SP_FT_NPIV);
+}
+
+/**
+ * fc_fdisc_fill - Fill in a fdisc request frame.
+ */
+static inline void fc_fdisc_fill(struct fc_lport *lport, struct fc_frame *fp)
+{
+	struct fc_els_csp *sp;
+	struct fc_els_cssp *cp;
+	struct fc_els_flogi *fdisc;
+
+	fdisc = fc_frame_payload_get(fp, sizeof(*fdisc));
+	memset(fdisc, 0, sizeof(*fdisc));
+	fdisc->fl_cmd = (u8) ELS_FDISC;
+	put_unaligned_be64(lport->wwpn, &fdisc->fl_wwpn);
+	put_unaligned_be64(lport->wwnn, &fdisc->fl_wwnn);
+	sp = &fdisc->fl_csp;
+	sp->sp_hi_ver = 0x20;
+	sp->sp_lo_ver = 0x20;
+	sp->sp_bb_cred = htons(10);	/* this gets set by gateway */
+	sp->sp_bb_data = htons((u16) lport->mfs);
+	cp = &fdisc->fl_cssp[3 - 1];	/* class 3 parameters */
+	cp->cp_class = htons(FC_CPC_VALID | FC_CPC_SEQ);
+}
+
+/**
+ * fc_logo_fill - Fill in a logo request frame.
+ */
+static inline void fc_logo_fill(struct fc_lport *lport, struct fc_frame *fp)
+{
+	struct fc_els_logo *logo;
+
+	logo = fc_frame_payload_get(fp, sizeof(*logo));
+	memset(logo, 0, sizeof(*logo));
+	logo->fl_cmd = ELS_LOGO;
+	hton24(logo->fl_n_port_id, lport->port_id);
+	logo->fl_n_port_wwn = htonll(lport->wwpn);
+}
+
+/**
+ * fc_rtv_fill - Fill in RTV (read timeout value) request frame.
+ */
+static inline void fc_rtv_fill(struct fc_lport *lport, struct fc_frame *fp)
+{
+	struct fc_els_rtv *rtv;
+
+	rtv = fc_frame_payload_get(fp, sizeof(*rtv));
+	memset(rtv, 0, sizeof(*rtv));
+	rtv->rtv_cmd = ELS_RTV;
+}
+
+/**
+ * fc_rec_fill - Fill in rec request frame
+ */
+static inline void fc_rec_fill(struct fc_lport *lport, struct fc_frame *fp)
+{
+	struct fc_els_rec *rec;
+	struct fc_exch *ep = fc_seq_exch(fr_seq(fp));
+
+	rec = fc_frame_payload_get(fp, sizeof(*rec));
+	memset(rec, 0, sizeof(*rec));
+	rec->rec_cmd = ELS_REC;
+	hton24(rec->rec_s_id, lport->port_id);
+	rec->rec_ox_id = htons(ep->oxid);
+	rec->rec_rx_id = htons(ep->rxid);
+}
+
+/**
+ * fc_prli_fill - Fill in prli request frame
+ */
+static inline void fc_prli_fill(struct fc_lport *lport, struct fc_frame *fp)
+{
+	struct {
+		struct fc_els_prli prli;
+		struct fc_els_spp spp;
+	} *pp;
+
+	pp = fc_frame_payload_get(fp, sizeof(*pp));
+	memset(pp, 0, sizeof(*pp));
+	pp->prli.prli_cmd = ELS_PRLI;
+	pp->prli.prli_spp_len = sizeof(struct fc_els_spp);
+	pp->prli.prli_len = htons(sizeof(*pp));
+	pp->spp.spp_type = FC_TYPE_FCP;
+	pp->spp.spp_flags = FC_SPP_EST_IMG_PAIR;
+	pp->spp.spp_params = htonl(lport->service_params);
+}
+
+/**
+ * fc_scr_fill - Fill in a scr request frame.
+ */
+static inline void fc_scr_fill(struct fc_lport *lport, struct fc_frame *fp)
+{
+	struct fc_els_scr *scr;
+
+	scr = fc_frame_payload_get(fp, sizeof(*scr));
+	memset(scr, 0, sizeof(*scr));
+	scr->scr_cmd = ELS_SCR;
+	scr->scr_reg_func = ELS_SCRF_FULL;
+}
+
+/**
+ * fc_els_fill - Fill in an ELS  request frame
+ */
+static inline int fc_els_fill(struct fc_lport *lport,
+		       u32 did,
+		       struct fc_frame *fp, unsigned int op,
+		       enum fc_rctl *r_ctl, enum fc_fh_type *fh_type)
+{
+	switch (op) {
+	case ELS_ADISC:
+		fc_adisc_fill(lport, fp);
+		break;
+
+	case ELS_PLOGI:
+		fc_plogi_fill(lport, fp, ELS_PLOGI);
+		break;
+
+	case ELS_FLOGI:
+		fc_flogi_fill(lport, fp);
+		break;
+
+	case ELS_FDISC:
+		fc_fdisc_fill(lport, fp);
+		break;
+
+	case ELS_LOGO:
+		fc_logo_fill(lport, fp);
+		break;
+
+	case ELS_RTV:
+		fc_rtv_fill(lport, fp);
+		break;
+
+	case ELS_REC:
+		fc_rec_fill(lport, fp);
+		break;
+
+	case ELS_PRLI:
+		fc_prli_fill(lport, fp);
+		break;
+
+	case ELS_SCR:
+		fc_scr_fill(lport, fp);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	*r_ctl = FC_RCTL_ELS_REQ;
+	*fh_type = FC_TYPE_ELS;
+	return 0;
+}
+#endif /* _FC_ENCODE_H_ */
diff --git a/include/scsi/fc_frame.h b/include/scsi/fc_frame.h
new file mode 100644
index 00000000..8225d806
--- /dev/null
+++ b/include/scsi/fc_frame.h
@@ -0,0 +1,261 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_FRAME_H_
+#define _FC_FRAME_H_
+
+#include <linux/scatterlist.h>
+#include <linux/skbuff.h>
+#include <scsi/scsi_cmnd.h>
+
+#include <scsi/fc/fc_fs.h>
+#include <scsi/fc/fc_fcp.h>
+#include <scsi/fc/fc_encaps.h>
+
+#include <linux/if_ether.h>
+
+/* some helpful macros */
+
+#define ntohll(x) be64_to_cpu(x)
+#define htonll(x) cpu_to_be64(x)
+
+static inline u32 ntoh24(const u8 *p)
+{
+	return (p[0] << 16) | (p[1] << 8) | p[2];
+}
+
+static inline void hton24(u8 *p, u32 v)
+{
+	p[0] = (v >> 16) & 0xff;
+	p[1] = (v >> 8) & 0xff;
+	p[2] = v & 0xff;
+}
+
+/*
+ * The fc_frame interface is used to pass frame data between functions.
+ * The frame includes the data buffer, length, and SOF / EOF delimiter types.
+ * A pointer to the port structure of the receiving port is also includeded.
+ */
+
+#define	FC_FRAME_HEADROOM	32	/* headroom for VLAN + FCoE headers */
+#define	FC_FRAME_TAILROOM	8	/* trailer space for FCoE */
+
+/* Max number of skb frags allowed, reserving one for fcoe_crc_eof page */
+#define FC_FRAME_SG_LEN		(MAX_SKB_FRAGS - 1)
+
+#define fp_skb(fp)	(&((fp)->skb))
+#define fr_hdr(fp)	((fp)->skb.data)
+#define fr_len(fp)	((fp)->skb.len)
+#define fr_cb(fp)	((struct fcoe_rcv_info *)&((fp)->skb.cb[0]))
+#define fr_dev(fp)	(fr_cb(fp)->fr_dev)
+#define fr_seq(fp)	(fr_cb(fp)->fr_seq)
+#define fr_sof(fp)	(fr_cb(fp)->fr_sof)
+#define fr_eof(fp)	(fr_cb(fp)->fr_eof)
+#define fr_flags(fp)	(fr_cb(fp)->fr_flags)
+#define fr_encaps(fp)	(fr_cb(fp)->fr_encaps)
+#define fr_max_payload(fp)	(fr_cb(fp)->fr_max_payload)
+#define fr_fsp(fp)	(fr_cb(fp)->fr_fsp)
+#define fr_crc(fp)	(fr_cb(fp)->fr_crc)
+
+struct fc_frame {
+	struct sk_buff skb;
+};
+
+struct fcoe_rcv_info {
+	struct fc_lport	*fr_dev;	/* transport layer private pointer */
+	struct fc_seq	*fr_seq;	/* for use with exchange manager */
+	struct fc_fcp_pkt *fr_fsp;	/* for the corresponding fcp I/O */
+	u32		fr_crc;
+	u16		fr_max_payload;	/* max FC payload */
+	u8		fr_sof;		/* start of frame delimiter */
+	u8		fr_eof;		/* end of frame delimiter */
+	u8		fr_flags;	/* flags - see below */
+	u8		fr_encaps;	/* LLD encapsulation info (e.g. FIP) */
+	u8		granted_mac[ETH_ALEN]; /* FCoE MAC address */
+};
+
+
+/*
+ * Get fc_frame pointer for an skb that's already been imported.
+ */
+static inline struct fcoe_rcv_info *fcoe_dev_from_skb(const struct sk_buff *skb)
+{
+	BUILD_BUG_ON(sizeof(struct fcoe_rcv_info) > sizeof(skb->cb));
+	return (struct fcoe_rcv_info *) skb->cb;
+}
+
+/*
+ * fr_flags.
+ */
+#define	FCPHF_CRC_UNCHECKED	0x01	/* CRC not computed, still appended */
+
+/*
+ * Initialize a frame.
+ * We don't do a complete memset here for performance reasons.
+ * The caller must set fr_free, fr_hdr, fr_len, fr_sof, and fr_eof eventually.
+ */
+static inline void fc_frame_init(struct fc_frame *fp)
+{
+	fr_dev(fp) = NULL;
+	fr_seq(fp) = NULL;
+	fr_flags(fp) = 0;
+	fr_encaps(fp) = 0;
+}
+
+struct fc_frame *fc_frame_alloc_fill(struct fc_lport *, size_t payload_len);
+struct fc_frame *_fc_frame_alloc(size_t payload_len);
+
+/*
+ * Allocate fc_frame structure and buffer.  Set the initial length to
+ * payload_size + sizeof (struct fc_frame_header).
+ */
+static inline struct fc_frame *fc_frame_alloc(struct fc_lport *dev, size_t len)
+{
+	struct fc_frame *fp;
+
+	/*
+	 * Note: Since len will often be a constant multiple of 4,
+	 * this check will usually be evaluated and eliminated at compile time.
+	 */
+	if (len && len % 4)
+		fp = fc_frame_alloc_fill(dev, len);
+	else
+		fp = _fc_frame_alloc(len);
+	return fp;
+}
+
+/*
+ * Free the fc_frame structure and buffer.
+ */
+static inline void fc_frame_free(struct fc_frame *fp)
+{
+	kfree_skb(fp_skb(fp));
+}
+
+static inline int fc_frame_is_linear(struct fc_frame *fp)
+{
+	return !skb_is_nonlinear(fp_skb(fp));
+}
+
+/*
+ * Get frame header from message in fc_frame structure.
+ * This version doesn't do a length check.
+ */
+static inline
+struct fc_frame_header *__fc_frame_header_get(const struct fc_frame *fp)
+{
+	return (struct fc_frame_header *)fr_hdr(fp);
+}
+
+/*
+ * Get frame header from message in fc_frame structure.
+ * This hides a cast and provides a place to add some checking.
+ */
+static inline
+struct fc_frame_header *fc_frame_header_get(const struct fc_frame *fp)
+{
+	WARN_ON(fr_len(fp) < sizeof(struct fc_frame_header));
+	return __fc_frame_header_get(fp);
+}
+
+/*
+ * Get source FC_ID (S_ID) from frame header in message.
+ */
+static inline u32 fc_frame_sid(const struct fc_frame *fp)
+{
+	return ntoh24(__fc_frame_header_get(fp)->fh_s_id);
+}
+
+/*
+ * Get destination FC_ID (D_ID) from frame header in message.
+ */
+static inline u32 fc_frame_did(const struct fc_frame *fp)
+{
+	return ntoh24(__fc_frame_header_get(fp)->fh_d_id);
+}
+
+/*
+ * Get frame payload from message in fc_frame structure.
+ * This hides a cast and provides a place to add some checking.
+ * The len parameter is the minimum length for the payload portion.
+ * Returns NULL if the frame is too short.
+ *
+ * This assumes the interesting part of the payload is in the first part
+ * of the buffer for received data.  This may not be appropriate to use for
+ * buffers being transmitted.
+ */
+static inline void *fc_frame_payload_get(const struct fc_frame *fp,
+					 size_t len)
+{
+	void *pp = NULL;
+
+	if (fr_len(fp) >= sizeof(struct fc_frame_header) + len)
+		pp = fc_frame_header_get(fp) + 1;
+	return pp;
+}
+
+/*
+ * Get frame payload opcode (first byte) from message in fc_frame structure.
+ * This hides a cast and provides a place to add some checking. Return 0
+ * if the frame has no payload.
+ */
+static inline u8 fc_frame_payload_op(const struct fc_frame *fp)
+{
+	u8 *cp;
+
+	cp = fc_frame_payload_get(fp, sizeof(u8));
+	if (!cp)
+		return 0;
+	return *cp;
+
+}
+
+/*
+ * Get FC class from frame.
+ */
+static inline enum fc_class fc_frame_class(const struct fc_frame *fp)
+{
+	return fc_sof_class(fr_sof(fp));
+}
+
+/*
+ * Check the CRC in a frame.
+ * The CRC immediately follows the last data item *AFTER* the length.
+ * The return value is zero if the CRC matches.
+ */
+u32 fc_frame_crc_check(struct fc_frame *);
+
+static inline u8 fc_frame_rctl(const struct fc_frame *fp)
+{
+	return fc_frame_header_get(fp)->fh_r_ctl;
+}
+
+static inline bool fc_frame_is_cmd(const struct fc_frame *fp)
+{
+	return fc_frame_rctl(fp) == FC_RCTL_DD_UNSOL_CMD;
+}
+
+/*
+ * Check for leaks.
+ * Print the frame header of any currently allocated frame, assuming there
+ * should be none at this point.
+ */
+void fc_frame_leak_check(void);
+
+#endif /* _FC_FRAME_H_ */
diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h
new file mode 100644
index 00000000..917741bb
--- /dev/null
+++ b/include/scsi/iscsi_if.h
@@ -0,0 +1,598 @@
+/*
+ * iSCSI User/Kernel Shares (Defines, Constants, Protocol definitions, etc)
+ *
+ * Copyright (C) 2005 Dmitry Yusupov
+ * Copyright (C) 2005 Alex Aizman
+ * maintained by open-iscsi@googlegroups.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * See the file COPYING included with this distribution for more details.
+ */
+
+#ifndef ISCSI_IF_H
+#define ISCSI_IF_H
+
+#include <scsi/iscsi_proto.h>
+#include <linux/in.h>
+#include <linux/in6.h>
+
+#define ISCSI_NL_GRP_ISCSID	1
+#define ISCSI_NL_GRP_UIP	2
+
+#define UEVENT_BASE			10
+#define KEVENT_BASE			100
+#define ISCSI_ERR_BASE			1000
+
+enum iscsi_uevent_e {
+	ISCSI_UEVENT_UNKNOWN		= 0,
+
+	/* down events */
+	ISCSI_UEVENT_CREATE_SESSION	= UEVENT_BASE + 1,
+	ISCSI_UEVENT_DESTROY_SESSION	= UEVENT_BASE + 2,
+	ISCSI_UEVENT_CREATE_CONN	= UEVENT_BASE + 3,
+	ISCSI_UEVENT_DESTROY_CONN	= UEVENT_BASE + 4,
+	ISCSI_UEVENT_BIND_CONN		= UEVENT_BASE + 5,
+	ISCSI_UEVENT_SET_PARAM		= UEVENT_BASE + 6,
+	ISCSI_UEVENT_START_CONN		= UEVENT_BASE + 7,
+	ISCSI_UEVENT_STOP_CONN		= UEVENT_BASE + 8,
+	ISCSI_UEVENT_SEND_PDU		= UEVENT_BASE + 9,
+	ISCSI_UEVENT_GET_STATS		= UEVENT_BASE + 10,
+	ISCSI_UEVENT_GET_PARAM		= UEVENT_BASE + 11,
+
+	ISCSI_UEVENT_TRANSPORT_EP_CONNECT	= UEVENT_BASE + 12,
+	ISCSI_UEVENT_TRANSPORT_EP_POLL		= UEVENT_BASE + 13,
+	ISCSI_UEVENT_TRANSPORT_EP_DISCONNECT	= UEVENT_BASE + 14,
+
+	ISCSI_UEVENT_TGT_DSCVR		= UEVENT_BASE + 15,
+	ISCSI_UEVENT_SET_HOST_PARAM	= UEVENT_BASE + 16,
+	ISCSI_UEVENT_UNBIND_SESSION	= UEVENT_BASE + 17,
+	ISCSI_UEVENT_CREATE_BOUND_SESSION		= UEVENT_BASE + 18,
+	ISCSI_UEVENT_TRANSPORT_EP_CONNECT_THROUGH_HOST	= UEVENT_BASE + 19,
+
+	ISCSI_UEVENT_PATH_UPDATE	= UEVENT_BASE + 20,
+	ISCSI_UEVENT_SET_IFACE_PARAMS	= UEVENT_BASE + 21,
+	ISCSI_UEVENT_PING		= UEVENT_BASE + 22,
+	ISCSI_UEVENT_GET_CHAP		= UEVENT_BASE + 23,
+	ISCSI_UEVENT_DELETE_CHAP	= UEVENT_BASE + 24,
+
+	/* up events */
+	ISCSI_KEVENT_RECV_PDU		= KEVENT_BASE + 1,
+	ISCSI_KEVENT_CONN_ERROR		= KEVENT_BASE + 2,
+	ISCSI_KEVENT_IF_ERROR		= KEVENT_BASE + 3,
+	ISCSI_KEVENT_DESTROY_SESSION	= KEVENT_BASE + 4,
+	ISCSI_KEVENT_UNBIND_SESSION	= KEVENT_BASE + 5,
+	ISCSI_KEVENT_CREATE_SESSION	= KEVENT_BASE + 6,
+
+	ISCSI_KEVENT_PATH_REQ		= KEVENT_BASE + 7,
+	ISCSI_KEVENT_IF_DOWN		= KEVENT_BASE + 8,
+	ISCSI_KEVENT_CONN_LOGIN_STATE   = KEVENT_BASE + 9,
+	ISCSI_KEVENT_HOST_EVENT		= KEVENT_BASE + 10,
+	ISCSI_KEVENT_PING_COMP		= KEVENT_BASE + 11,
+};
+
+enum iscsi_tgt_dscvr {
+	ISCSI_TGT_DSCVR_SEND_TARGETS	= 1,
+	ISCSI_TGT_DSCVR_ISNS		= 2,
+	ISCSI_TGT_DSCVR_SLP		= 3,
+};
+
+enum iscsi_host_event_code {
+	ISCSI_EVENT_LINKUP		= 1,
+	ISCSI_EVENT_LINKDOWN,
+	/* must always be last */
+	ISCSI_EVENT_MAX,
+};
+
+struct iscsi_uevent {
+	uint32_t type; /* k/u events type */
+	uint32_t iferror; /* carries interface or resource errors */
+	uint64_t transport_handle;
+
+	union {
+		/* messages u -> k */
+		struct msg_create_session {
+			uint32_t	initial_cmdsn;
+			uint16_t	cmds_max;
+			uint16_t	queue_depth;
+		} c_session;
+		struct msg_create_bound_session {
+			uint64_t	ep_handle;
+			uint32_t	initial_cmdsn;
+			uint16_t	cmds_max;
+			uint16_t	queue_depth;
+		} c_bound_session;
+		struct msg_destroy_session {
+			uint32_t	sid;
+		} d_session;
+		struct msg_create_conn {
+			uint32_t	sid;
+			uint32_t	cid;
+		} c_conn;
+		struct msg_bind_conn {
+			uint32_t	sid;
+			uint32_t	cid;
+			uint64_t	transport_eph;
+			uint32_t	is_leading;
+		} b_conn;
+		struct msg_destroy_conn {
+			uint32_t	sid;
+			uint32_t	cid;
+		} d_conn;
+		struct msg_send_pdu {
+			uint32_t	sid;
+			uint32_t	cid;
+			uint32_t	hdr_size;
+			uint32_t	data_size;
+		} send_pdu;
+		struct msg_set_param {
+			uint32_t	sid;
+			uint32_t	cid;
+			uint32_t	param; /* enum iscsi_param */
+			uint32_t	len;
+		} set_param;
+		struct msg_start_conn {
+			uint32_t	sid;
+			uint32_t	cid;
+		} start_conn;
+		struct msg_stop_conn {
+			uint32_t	sid;
+			uint32_t	cid;
+			uint64_t	conn_handle;
+			uint32_t	flag;
+		} stop_conn;
+		struct msg_get_stats {
+			uint32_t	sid;
+			uint32_t	cid;
+		} get_stats;
+		struct msg_transport_connect {
+			uint32_t	non_blocking;
+		} ep_connect;
+		struct msg_transport_connect_through_host {
+			uint32_t	host_no;
+			uint32_t	non_blocking;
+		} ep_connect_through_host;
+		struct msg_transport_poll {
+			uint64_t	ep_handle;
+			uint32_t	timeout_ms;
+		} ep_poll;
+		struct msg_transport_disconnect {
+			uint64_t	ep_handle;
+		} ep_disconnect;
+		struct msg_tgt_dscvr {
+			enum iscsi_tgt_dscvr	type;
+			uint32_t	host_no;
+			/*
+ 			 * enable = 1 to establish a new connection
+			 * with the server. enable = 0 to disconnect
+			 * from the server. Used primarily to switch
+			 * from one iSNS server to another.
+			 */
+			uint32_t	enable;
+		} tgt_dscvr;
+		struct msg_set_host_param {
+			uint32_t	host_no;
+			uint32_t	param; /* enum iscsi_host_param */
+			uint32_t	len;
+		} set_host_param;
+		struct msg_set_path {
+			uint32_t	host_no;
+		} set_path;
+		struct msg_set_iface_params {
+			uint32_t	host_no;
+			uint32_t	count;
+		} set_iface_params;
+		struct msg_iscsi_ping {
+			uint32_t        host_no;
+			uint32_t        iface_num;
+			uint32_t        iface_type;
+			uint32_t        payload_size;
+			uint32_t	pid;	/* unique ping id associated
+						   with each ping request */
+		} iscsi_ping;
+		struct msg_get_chap {
+			uint32_t	host_no;
+			uint32_t	num_entries; /* number of CHAP entries
+						      * on request, number of
+						      * valid CHAP entries on
+						      * response */
+			uint16_t	chap_tbl_idx;
+		} get_chap;
+		struct msg_delete_chap {
+		       uint32_t        host_no;
+		       uint16_t        chap_tbl_idx;
+		} delete_chap;
+	} u;
+	union {
+		/* messages k -> u */
+		int			retcode;
+		struct msg_create_session_ret {
+			uint32_t	sid;
+			uint32_t	host_no;
+		} c_session_ret;
+		struct msg_create_conn_ret {
+			uint32_t	sid;
+			uint32_t	cid;
+		} c_conn_ret;
+		struct msg_unbind_session {
+			uint32_t	sid;
+			uint32_t	host_no;
+		} unbind_session;
+		struct msg_recv_req {
+			uint32_t	sid;
+			uint32_t	cid;
+			uint64_t	recv_handle;
+		} recv_req;
+		struct msg_conn_login {
+			uint32_t        sid;
+			uint32_t        cid;
+			uint32_t        state; /* enum iscsi_conn_state */
+		} conn_login;
+		struct msg_conn_error {
+			uint32_t	sid;
+			uint32_t	cid;
+			uint32_t	error; /* enum iscsi_err */
+		} connerror;
+		struct msg_session_destroyed {
+			uint32_t	host_no;
+			uint32_t	sid;
+		} d_session;
+		struct msg_transport_connect_ret {
+			uint64_t	handle;
+		} ep_connect_ret;
+		struct msg_req_path {
+			uint32_t	host_no;
+		} req_path;
+		struct msg_notify_if_down {
+			uint32_t	host_no;
+		} notify_if_down;
+		struct msg_host_event {
+			uint32_t	host_no;
+			uint32_t	data_size;
+			enum iscsi_host_event_code code;
+		} host_event;
+		struct msg_ping_comp {
+			uint32_t        host_no;
+			uint32_t        status; /* enum
+						 * iscsi_ping_status_code */
+			uint32_t	pid;	/* unique ping id associated
+						   with each ping request */
+			uint32_t        data_size;
+		} ping_comp;
+	} r;
+} __attribute__ ((aligned (sizeof(uint64_t))));
+
+enum iscsi_param_type {
+	ISCSI_PARAM,		/* iscsi_param (session, conn, target, LU) */
+	ISCSI_HOST_PARAM,	/* iscsi_host_param */
+	ISCSI_NET_PARAM,	/* iscsi_net_param */
+};
+
+struct iscsi_iface_param_info {
+	uint32_t iface_num;	/* iface number, 0 - n */
+	uint32_t len;		/* Actual length of the param */
+	uint16_t param;		/* iscsi param value */
+	uint8_t iface_type;	/* IPv4 or IPv6 */
+	uint8_t param_type;	/* iscsi_param_type */
+	uint8_t value[0];	/* length sized value follows */
+} __packed;
+
+/*
+ * To keep the struct iscsi_uevent size the same for userspace code
+ * compatibility, the main structure for ISCSI_UEVENT_PATH_UPDATE and
+ * ISCSI_KEVENT_PATH_REQ is defined separately and comes after the
+ * struct iscsi_uevent in the NETLINK_ISCSI message.
+ */
+struct iscsi_path {
+	uint64_t	handle;
+	uint8_t		mac_addr[6];
+	uint8_t		mac_addr_old[6];
+	uint32_t	ip_addr_len;	/* 4 or 16 */
+	union {
+		struct in_addr	v4_addr;
+		struct in6_addr	v6_addr;
+	} src;
+	union {
+		struct in_addr	v4_addr;
+		struct in6_addr	v6_addr;
+	} dst;
+	uint16_t	vlan_id;
+	uint16_t	pmtu;
+} __attribute__ ((aligned (sizeof(uint64_t))));
+
+/* iscsi iface enabled/disabled setting */
+#define ISCSI_IFACE_DISABLE	0x01
+#define ISCSI_IFACE_ENABLE	0x02
+
+/* ipv4 bootproto */
+#define ISCSI_BOOTPROTO_STATIC		0x01
+#define ISCSI_BOOTPROTO_DHCP		0x02
+
+/* ipv6 addr autoconfig type */
+#define ISCSI_IPV6_AUTOCFG_DISABLE		0x01
+#define ISCSI_IPV6_AUTOCFG_ND_ENABLE		0x02
+#define ISCSI_IPV6_AUTOCFG_DHCPV6_ENABLE	0x03
+
+/* ipv6 link local addr type */
+#define ISCSI_IPV6_LINKLOCAL_AUTOCFG_ENABLE	0x01
+#define ISCSI_IPV6_LINKLOCAL_AUTOCFG_DISABLE	0x02
+
+/* ipv6 router addr type */
+#define ISCSI_IPV6_ROUTER_AUTOCFG_ENABLE	0x01
+#define ISCSI_IPV6_ROUTER_AUTOCFG_DISABLE	0x02
+
+#define ISCSI_IFACE_TYPE_IPV4		0x01
+#define ISCSI_IFACE_TYPE_IPV6		0x02
+
+#define ISCSI_MAX_VLAN_ID		4095
+#define ISCSI_MAX_VLAN_PRIORITY		7
+
+/* iscsi vlan enable/disabled setting */
+#define ISCSI_VLAN_DISABLE	0x01
+#define ISCSI_VLAN_ENABLE	0x02
+
+/* iSCSI network params */
+enum iscsi_net_param {
+	ISCSI_NET_PARAM_IPV4_ADDR		= 1,
+	ISCSI_NET_PARAM_IPV4_SUBNET		= 2,
+	ISCSI_NET_PARAM_IPV4_GW			= 3,
+	ISCSI_NET_PARAM_IPV4_BOOTPROTO		= 4,
+	ISCSI_NET_PARAM_MAC			= 5,
+	ISCSI_NET_PARAM_IPV6_LINKLOCAL		= 6,
+	ISCSI_NET_PARAM_IPV6_ADDR		= 7,
+	ISCSI_NET_PARAM_IPV6_ROUTER		= 8,
+	ISCSI_NET_PARAM_IPV6_ADDR_AUTOCFG	= 9,
+	ISCSI_NET_PARAM_IPV6_LINKLOCAL_AUTOCFG	= 10,
+	ISCSI_NET_PARAM_IPV6_ROUTER_AUTOCFG	= 11,
+	ISCSI_NET_PARAM_IFACE_ENABLE		= 12,
+	ISCSI_NET_PARAM_VLAN_ID			= 13,
+	ISCSI_NET_PARAM_VLAN_PRIORITY		= 14,
+	ISCSI_NET_PARAM_VLAN_ENABLED		= 15,
+	ISCSI_NET_PARAM_VLAN_TAG		= 16,
+	ISCSI_NET_PARAM_IFACE_TYPE		= 17,
+	ISCSI_NET_PARAM_IFACE_NAME		= 18,
+	ISCSI_NET_PARAM_MTU			= 19,
+	ISCSI_NET_PARAM_PORT			= 20,
+};
+
+enum iscsi_conn_state {
+	ISCSI_CONN_STATE_FREE,
+	ISCSI_CONN_STATE_XPT_WAIT,
+	ISCSI_CONN_STATE_IN_LOGIN,
+	ISCSI_CONN_STATE_LOGGED_IN,
+	ISCSI_CONN_STATE_IN_LOGOUT,
+	ISCSI_CONN_STATE_LOGOUT_REQUESTED,
+	ISCSI_CONN_STATE_CLEANUP_WAIT,
+};
+
+/*
+ * Common error codes
+ */
+enum iscsi_err {
+	ISCSI_OK			= 0,
+
+	ISCSI_ERR_DATASN		= ISCSI_ERR_BASE + 1,
+	ISCSI_ERR_DATA_OFFSET		= ISCSI_ERR_BASE + 2,
+	ISCSI_ERR_MAX_CMDSN		= ISCSI_ERR_BASE + 3,
+	ISCSI_ERR_EXP_CMDSN		= ISCSI_ERR_BASE + 4,
+	ISCSI_ERR_BAD_OPCODE		= ISCSI_ERR_BASE + 5,
+	ISCSI_ERR_DATALEN		= ISCSI_ERR_BASE + 6,
+	ISCSI_ERR_AHSLEN		= ISCSI_ERR_BASE + 7,
+	ISCSI_ERR_PROTO			= ISCSI_ERR_BASE + 8,
+	ISCSI_ERR_LUN			= ISCSI_ERR_BASE + 9,
+	ISCSI_ERR_BAD_ITT		= ISCSI_ERR_BASE + 10,
+	ISCSI_ERR_CONN_FAILED		= ISCSI_ERR_BASE + 11,
+	ISCSI_ERR_R2TSN			= ISCSI_ERR_BASE + 12,
+	ISCSI_ERR_SESSION_FAILED	= ISCSI_ERR_BASE + 13,
+	ISCSI_ERR_HDR_DGST		= ISCSI_ERR_BASE + 14,
+	ISCSI_ERR_DATA_DGST		= ISCSI_ERR_BASE + 15,
+	ISCSI_ERR_PARAM_NOT_FOUND	= ISCSI_ERR_BASE + 16,
+	ISCSI_ERR_NO_SCSI_CMD		= ISCSI_ERR_BASE + 17,
+	ISCSI_ERR_INVALID_HOST		= ISCSI_ERR_BASE + 18,
+	ISCSI_ERR_XMIT_FAILED		= ISCSI_ERR_BASE + 19,
+	ISCSI_ERR_TCP_CONN_CLOSE	= ISCSI_ERR_BASE + 20,
+	ISCSI_ERR_SCSI_EH_SESSION_RST	= ISCSI_ERR_BASE + 21,
+};
+
+/*
+ * iSCSI Parameters (RFC3720)
+ */
+enum iscsi_param {
+	/* passed in using netlink set param */
+	ISCSI_PARAM_MAX_RECV_DLENGTH,
+	ISCSI_PARAM_MAX_XMIT_DLENGTH,
+	ISCSI_PARAM_HDRDGST_EN,
+	ISCSI_PARAM_DATADGST_EN,
+	ISCSI_PARAM_INITIAL_R2T_EN,
+	ISCSI_PARAM_MAX_R2T,
+	ISCSI_PARAM_IMM_DATA_EN,
+	ISCSI_PARAM_FIRST_BURST,
+	ISCSI_PARAM_MAX_BURST,
+	ISCSI_PARAM_PDU_INORDER_EN,
+	ISCSI_PARAM_DATASEQ_INORDER_EN,
+	ISCSI_PARAM_ERL,
+	ISCSI_PARAM_IFMARKER_EN,
+	ISCSI_PARAM_OFMARKER_EN,
+	ISCSI_PARAM_EXP_STATSN,
+	ISCSI_PARAM_TARGET_NAME,
+	ISCSI_PARAM_TPGT,
+	ISCSI_PARAM_PERSISTENT_ADDRESS,
+	ISCSI_PARAM_PERSISTENT_PORT,
+	ISCSI_PARAM_SESS_RECOVERY_TMO,
+
+	/* passed in through bind conn using transport_fd */
+	ISCSI_PARAM_CONN_PORT,
+	ISCSI_PARAM_CONN_ADDRESS,
+
+	ISCSI_PARAM_USERNAME,
+	ISCSI_PARAM_USERNAME_IN,
+	ISCSI_PARAM_PASSWORD,
+	ISCSI_PARAM_PASSWORD_IN,
+
+	ISCSI_PARAM_FAST_ABORT,
+	ISCSI_PARAM_ABORT_TMO,
+	ISCSI_PARAM_LU_RESET_TMO,
+	ISCSI_PARAM_HOST_RESET_TMO,
+
+	ISCSI_PARAM_PING_TMO,
+	ISCSI_PARAM_RECV_TMO,
+
+	ISCSI_PARAM_IFACE_NAME,
+	ISCSI_PARAM_ISID,
+	ISCSI_PARAM_INITIATOR_NAME,
+
+	ISCSI_PARAM_TGT_RESET_TMO,
+	ISCSI_PARAM_TARGET_ALIAS,
+
+	ISCSI_PARAM_CHAP_IN_IDX,
+	ISCSI_PARAM_CHAP_OUT_IDX,
+	/* must always be last */
+	ISCSI_PARAM_MAX,
+};
+
+/* iSCSI HBA params */
+enum iscsi_host_param {
+	ISCSI_HOST_PARAM_HWADDRESS,
+	ISCSI_HOST_PARAM_INITIATOR_NAME,
+	ISCSI_HOST_PARAM_NETDEV_NAME,
+	ISCSI_HOST_PARAM_IPADDRESS,
+	ISCSI_HOST_PARAM_PORT_STATE,
+	ISCSI_HOST_PARAM_PORT_SPEED,
+	ISCSI_HOST_PARAM_MAX,
+};
+
+/* iSCSI port Speed */
+enum iscsi_port_speed {
+	ISCSI_PORT_SPEED_UNKNOWN	= 0x1,
+	ISCSI_PORT_SPEED_10MBPS		= 0x2,
+	ISCSI_PORT_SPEED_100MBPS	= 0x4,
+	ISCSI_PORT_SPEED_1GBPS		= 0x8,
+	ISCSI_PORT_SPEED_10GBPS		= 0x10,
+};
+
+/* iSCSI port state */
+enum iscsi_port_state {
+	ISCSI_PORT_STATE_DOWN		= 0x1,
+	ISCSI_PORT_STATE_UP		= 0x2,
+};
+
+/* iSCSI PING status/error code */
+enum iscsi_ping_status_code {
+	ISCSI_PING_SUCCESS			= 0,
+	ISCSI_PING_FW_DISABLED			= 0x1,
+	ISCSI_PING_IPADDR_INVALID		= 0x2,
+	ISCSI_PING_LINKLOCAL_IPV6_ADDR_INVALID	= 0x3,
+	ISCSI_PING_TIMEOUT			= 0x4,
+	ISCSI_PING_INVALID_DEST_ADDR		= 0x5,
+	ISCSI_PING_OVERSIZE_PACKET		= 0x6,
+	ISCSI_PING_ICMP_ERROR			= 0x7,
+	ISCSI_PING_MAX_REQ_EXCEEDED		= 0x8,
+	ISCSI_PING_NO_ARP_RECEIVED		= 0x9,
+};
+
+#define iscsi_ptr(_handle) ((void*)(unsigned long)_handle)
+#define iscsi_handle(_ptr) ((uint64_t)(unsigned long)_ptr)
+
+/*
+ * These flags presents iSCSI Data-Path capabilities.
+ */
+#define CAP_RECOVERY_L0		0x1
+#define CAP_RECOVERY_L1		0x2
+#define CAP_RECOVERY_L2		0x4
+#define CAP_MULTI_R2T		0x8
+#define CAP_HDRDGST		0x10
+#define CAP_DATADGST		0x20
+#define CAP_MULTI_CONN		0x40
+#define CAP_TEXT_NEGO		0x80
+#define CAP_MARKERS		0x100
+#define CAP_FW_DB		0x200
+#define CAP_SENDTARGETS_OFFLOAD	0x400	/* offload discovery process */
+#define CAP_DATA_PATH_OFFLOAD	0x800	/* offload entire IO path */
+#define CAP_DIGEST_OFFLOAD	0x1000	/* offload hdr and data digests */
+#define CAP_PADDING_OFFLOAD	0x2000	/* offload padding insertion, removal,
+					 and verification */
+#define CAP_LOGIN_OFFLOAD	0x4000  /* offload session login */
+
+/*
+ * These flags describes reason of stop_conn() call
+ */
+#define STOP_CONN_TERM		0x1
+#define STOP_CONN_SUSPEND	0x2
+#define STOP_CONN_RECOVER	0x3
+
+#define ISCSI_STATS_CUSTOM_MAX		32
+#define ISCSI_STATS_CUSTOM_DESC_MAX	64
+struct iscsi_stats_custom {
+	char desc[ISCSI_STATS_CUSTOM_DESC_MAX];
+	uint64_t value;
+};
+
+/*
+ * struct iscsi_stats - iSCSI Statistics (iSCSI MIB)
+ *
+ * Note: this structure contains counters collected on per-connection basis.
+ */
+struct iscsi_stats {
+	/* octets */
+	uint64_t txdata_octets;
+	uint64_t rxdata_octets;
+
+	/* xmit pdus */
+	uint32_t noptx_pdus;
+	uint32_t scsicmd_pdus;
+	uint32_t tmfcmd_pdus;
+	uint32_t login_pdus;
+	uint32_t text_pdus;
+	uint32_t dataout_pdus;
+	uint32_t logout_pdus;
+	uint32_t snack_pdus;
+
+	/* recv pdus */
+	uint32_t noprx_pdus;
+	uint32_t scsirsp_pdus;
+	uint32_t tmfrsp_pdus;
+	uint32_t textrsp_pdus;
+	uint32_t datain_pdus;
+	uint32_t logoutrsp_pdus;
+	uint32_t r2t_pdus;
+	uint32_t async_pdus;
+	uint32_t rjt_pdus;
+
+	/* errors */
+	uint32_t digest_err;
+	uint32_t timeout_err;
+
+	/*
+	 * iSCSI Custom Statistics support, i.e. Transport could
+	 * extend existing MIB statistics with its own specific statistics
+	 * up to ISCSI_STATS_CUSTOM_MAX
+	 */
+	uint32_t custom_length;
+	struct iscsi_stats_custom custom[0]
+		__attribute__ ((aligned (sizeof(uint64_t))));
+};
+
+enum chap_type_e {
+	CHAP_TYPE_OUT,
+	CHAP_TYPE_IN,
+};
+
+#define ISCSI_CHAP_AUTH_NAME_MAX_LEN	256
+#define ISCSI_CHAP_AUTH_SECRET_MAX_LEN	256
+struct iscsi_chap_rec {
+	uint16_t chap_tbl_idx;
+	enum chap_type_e chap_type;
+	char username[ISCSI_CHAP_AUTH_NAME_MAX_LEN];
+	uint8_t password[ISCSI_CHAP_AUTH_SECRET_MAX_LEN];
+	uint8_t password_length;
+};
+
+#endif
diff --git a/include/scsi/iscsi_proto.h b/include/scsi/iscsi_proto.h
new file mode 100644
index 00000000..988ba06b
--- /dev/null
+++ b/include/scsi/iscsi_proto.h
@@ -0,0 +1,666 @@
+/*
+ * RFC 3720 (iSCSI) protocol data types
+ *
+ * Copyright (C) 2005 Dmitry Yusupov
+ * Copyright (C) 2005 Alex Aizman
+ * maintained by open-iscsi@googlegroups.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * See the file COPYING included with this distribution for more details.
+ */
+
+#ifndef ISCSI_PROTO_H
+#define ISCSI_PROTO_H
+
+#include <linux/types.h>
+#include <scsi/scsi.h>
+
+#define ISCSI_DRAFT20_VERSION	0x00
+
+/* default iSCSI listen port for incoming connections */
+#define ISCSI_LISTEN_PORT	3260
+
+/* iSCSI header length */
+#define ISCSI_HDR_LEN		48
+
+/* iSCSI CRC32C length */
+#define ISCSI_CRC_LEN		4
+
+/* Padding word length */
+#define ISCSI_PAD_LEN		4
+
+/*
+ * Serial Number Arithmetic, 32 bits, RFC1982
+ */
+
+static inline int iscsi_sna_lt(u32 n1, u32 n2)
+{
+	return (s32)(n1 - n2) < 0;
+}
+
+static inline int iscsi_sna_lte(u32 n1, u32 n2)
+{
+	return (s32)(n1 - n2) <= 0;
+}
+
+static inline int iscsi_sna_gt(u32 n1, u32 n2)
+{
+	return (s32)(n1 - n2) > 0;
+}
+
+static inline int iscsi_sna_gte(u32 n1, u32 n2)
+{
+	return (s32)(n1 - n2) >= 0;
+}
+
+/*
+ * useful common(control and data pathes) macro
+ */
+#define ntoh24(p) (((p)[0] << 16) | ((p)[1] << 8) | ((p)[2]))
+#define hton24(p, v) { \
+        p[0] = (((v) >> 16) & 0xFF); \
+        p[1] = (((v) >> 8) & 0xFF); \
+        p[2] = ((v) & 0xFF); \
+}
+#define zero_data(p) {p[0]=0;p[1]=0;p[2]=0;}
+
+/* initiator tags; opaque for target */
+typedef uint32_t __bitwise__ itt_t;
+/* below makes sense only for initiator that created this tag */
+#define build_itt(itt, age) ((__force itt_t)\
+	((itt) | ((age) << ISCSI_AGE_SHIFT)))
+#define get_itt(itt) ((__force uint32_t)(itt_t)(itt) & ISCSI_ITT_MASK)
+#define RESERVED_ITT ((__force itt_t)0xffffffff)
+
+/*
+ * iSCSI Template Message Header
+ */
+struct iscsi_hdr {
+	uint8_t		opcode;
+	uint8_t		flags;		/* Final bit */
+	uint8_t		rsvd2[2];
+	uint8_t		hlength;	/* AHSs total length */
+	uint8_t		dlength[3];	/* Data length */
+	struct scsi_lun	lun;
+	itt_t		itt;		/* Initiator Task Tag, opaque for target */
+	__be32		ttt;		/* Target Task Tag */
+	__be32		statsn;
+	__be32		exp_statsn;
+	__be32		max_statsn;
+	uint8_t		other[12];
+};
+
+/************************* RFC 3720 Begin *****************************/
+
+#define ISCSI_RESERVED_TAG		0xffffffff
+
+/* Opcode encoding bits */
+#define ISCSI_OP_RETRY			0x80
+#define ISCSI_OP_IMMEDIATE		0x40
+#define ISCSI_OPCODE_MASK		0x3F
+
+/* Initiator Opcode values */
+#define ISCSI_OP_NOOP_OUT		0x00
+#define ISCSI_OP_SCSI_CMD		0x01
+#define ISCSI_OP_SCSI_TMFUNC		0x02
+#define ISCSI_OP_LOGIN			0x03
+#define ISCSI_OP_TEXT			0x04
+#define ISCSI_OP_SCSI_DATA_OUT		0x05
+#define ISCSI_OP_LOGOUT			0x06
+#define ISCSI_OP_SNACK			0x10
+
+#define ISCSI_OP_VENDOR1_CMD		0x1c
+#define ISCSI_OP_VENDOR2_CMD		0x1d
+#define ISCSI_OP_VENDOR3_CMD		0x1e
+#define ISCSI_OP_VENDOR4_CMD		0x1f
+
+/* Target Opcode values */
+#define ISCSI_OP_NOOP_IN		0x20
+#define ISCSI_OP_SCSI_CMD_RSP		0x21
+#define ISCSI_OP_SCSI_TMFUNC_RSP	0x22
+#define ISCSI_OP_LOGIN_RSP		0x23
+#define ISCSI_OP_TEXT_RSP		0x24
+#define ISCSI_OP_SCSI_DATA_IN		0x25
+#define ISCSI_OP_LOGOUT_RSP		0x26
+#define ISCSI_OP_R2T			0x31
+#define ISCSI_OP_ASYNC_EVENT		0x32
+#define ISCSI_OP_REJECT			0x3f
+
+struct iscsi_ahs_hdr {
+	__be16 ahslength;
+	uint8_t ahstype;
+	uint8_t ahspec[5];
+};
+
+#define ISCSI_AHSTYPE_CDB		1
+#define ISCSI_AHSTYPE_RLENGTH		2
+#define ISCSI_CDB_SIZE			16
+
+/* iSCSI PDU Header */
+struct iscsi_scsi_req {
+	uint8_t opcode;
+	uint8_t flags;
+	__be16 rsvd2;
+	uint8_t hlength;
+	uint8_t dlength[3];
+	struct scsi_lun lun;
+	itt_t	 itt;	/* Initiator Task Tag */
+	__be32 data_length;
+	__be32 cmdsn;
+	__be32 exp_statsn;
+	uint8_t cdb[ISCSI_CDB_SIZE];	/* SCSI Command Block */
+	/* Additional Data (Command Dependent) */
+};
+
+/* Command PDU flags */
+#define ISCSI_FLAG_CMD_FINAL		0x80
+#define ISCSI_FLAG_CMD_READ		0x40
+#define ISCSI_FLAG_CMD_WRITE		0x20
+#define ISCSI_FLAG_CMD_ATTR_MASK	0x07	/* 3 bits */
+
+/* SCSI Command Attribute values */
+#define ISCSI_ATTR_UNTAGGED		0
+#define ISCSI_ATTR_SIMPLE		1
+#define ISCSI_ATTR_ORDERED		2
+#define ISCSI_ATTR_HEAD_OF_QUEUE	3
+#define ISCSI_ATTR_ACA			4
+
+struct iscsi_rlength_ahdr {
+	__be16 ahslength;
+	uint8_t ahstype;
+	uint8_t reserved;
+	__be32 read_length;
+};
+
+/* Extended CDB AHS */
+struct iscsi_ecdb_ahdr {
+	__be16 ahslength;	/* CDB length - 15, including reserved byte */
+	uint8_t ahstype;
+	uint8_t reserved;
+	/* 4-byte aligned extended CDB spillover */
+	uint8_t ecdb[SCSI_MAX_VARLEN_CDB_SIZE - ISCSI_CDB_SIZE];
+};
+
+/* SCSI Response Header */
+struct iscsi_scsi_rsp {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t response;
+	uint8_t cmd_status;
+	uint8_t hlength;
+	uint8_t dlength[3];
+	uint8_t rsvd[8];
+	itt_t	 itt;	/* Initiator Task Tag */
+	__be32	rsvd1;
+	__be32	statsn;
+	__be32	exp_cmdsn;
+	__be32	max_cmdsn;
+	__be32	exp_datasn;
+	__be32	bi_residual_count;
+	__be32	residual_count;
+	/* Response or Sense Data (optional) */
+};
+
+/* Command Response PDU flags */
+#define ISCSI_FLAG_CMD_BIDI_OVERFLOW	0x10
+#define ISCSI_FLAG_CMD_BIDI_UNDERFLOW	0x08
+#define ISCSI_FLAG_CMD_OVERFLOW		0x04
+#define ISCSI_FLAG_CMD_UNDERFLOW	0x02
+
+/* iSCSI Status values. Valid if Rsp Selector bit is not set */
+#define ISCSI_STATUS_CMD_COMPLETED	0
+#define ISCSI_STATUS_TARGET_FAILURE	1
+#define ISCSI_STATUS_SUBSYS_FAILURE	2
+
+/* Asynchronous Event Header */
+struct iscsi_async {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t rsvd2[2];
+	uint8_t rsvd3;
+	uint8_t dlength[3];
+	struct scsi_lun	lun;
+	uint8_t rsvd4[8];
+	__be32	statsn;
+	__be32	exp_cmdsn;
+	__be32	max_cmdsn;
+	uint8_t async_event;
+	uint8_t async_vcode;
+	__be16	param1;
+	__be16	param2;
+	__be16	param3;
+	uint8_t rsvd5[4];
+};
+
+/* iSCSI Event Codes */
+#define ISCSI_ASYNC_MSG_SCSI_EVENT			0
+#define ISCSI_ASYNC_MSG_REQUEST_LOGOUT			1
+#define ISCSI_ASYNC_MSG_DROPPING_CONNECTION		2
+#define ISCSI_ASYNC_MSG_DROPPING_ALL_CONNECTIONS	3
+#define ISCSI_ASYNC_MSG_PARAM_NEGOTIATION		4
+#define ISCSI_ASYNC_MSG_VENDOR_SPECIFIC			255
+
+/* NOP-Out Message */
+struct iscsi_nopout {
+	uint8_t opcode;
+	uint8_t flags;
+	__be16	rsvd2;
+	uint8_t rsvd3;
+	uint8_t dlength[3];
+	struct scsi_lun	lun;
+	itt_t	 itt;	/* Initiator Task Tag */
+	__be32	ttt;	/* Target Transfer Tag */
+	__be32	cmdsn;
+	__be32	exp_statsn;
+	uint8_t rsvd4[16];
+};
+
+/* NOP-In Message */
+struct iscsi_nopin {
+	uint8_t opcode;
+	uint8_t flags;
+	__be16	rsvd2;
+	uint8_t rsvd3;
+	uint8_t dlength[3];
+	struct scsi_lun	lun;
+	itt_t	 itt;	/* Initiator Task Tag */
+	__be32	ttt;	/* Target Transfer Tag */
+	__be32	statsn;
+	__be32	exp_cmdsn;
+	__be32	max_cmdsn;
+	uint8_t rsvd4[12];
+};
+
+/* SCSI Task Management Message Header */
+struct iscsi_tm {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t rsvd1[2];
+	uint8_t hlength;
+	uint8_t dlength[3];
+	struct scsi_lun lun;
+	itt_t	 itt;	/* Initiator Task Tag */
+	itt_t	 rtt;	/* Reference Task Tag */
+	__be32	cmdsn;
+	__be32	exp_statsn;
+	__be32	refcmdsn;
+	__be32	exp_datasn;
+	uint8_t rsvd2[8];
+};
+
+#define ISCSI_FLAG_TM_FUNC_MASK			0x7F
+
+/* Function values */
+#define ISCSI_TM_FUNC_ABORT_TASK		1
+#define ISCSI_TM_FUNC_ABORT_TASK_SET		2
+#define ISCSI_TM_FUNC_CLEAR_ACA			3
+#define ISCSI_TM_FUNC_CLEAR_TASK_SET		4
+#define ISCSI_TM_FUNC_LOGICAL_UNIT_RESET	5
+#define ISCSI_TM_FUNC_TARGET_WARM_RESET		6
+#define ISCSI_TM_FUNC_TARGET_COLD_RESET		7
+#define ISCSI_TM_FUNC_TASK_REASSIGN		8
+
+#define ISCSI_TM_FUNC_VALUE(hdr) ((hdr)->flags & ISCSI_FLAG_TM_FUNC_MASK)
+
+/* SCSI Task Management Response Header */
+struct iscsi_tm_rsp {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t response;	/* see Response values below */
+	uint8_t qualifier;
+	uint8_t hlength;
+	uint8_t dlength[3];
+	uint8_t rsvd2[8];
+	itt_t	 itt;	/* Initiator Task Tag */
+	itt_t	 rtt;	/* Reference Task Tag */
+	__be32	statsn;
+	__be32	exp_cmdsn;
+	__be32	max_cmdsn;
+	uint8_t rsvd3[12];
+};
+
+/* Response values */
+#define ISCSI_TMF_RSP_COMPLETE		0x00
+#define ISCSI_TMF_RSP_NO_TASK		0x01
+#define ISCSI_TMF_RSP_NO_LUN		0x02
+#define ISCSI_TMF_RSP_TASK_ALLEGIANT	0x03
+#define ISCSI_TMF_RSP_NO_FAILOVER	0x04
+#define ISCSI_TMF_RSP_NOT_SUPPORTED	0x05
+#define ISCSI_TMF_RSP_AUTH_FAILED	0x06
+#define ISCSI_TMF_RSP_REJECTED		0xff
+
+/* Ready To Transfer Header */
+struct iscsi_r2t_rsp {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t rsvd2[2];
+	uint8_t	hlength;
+	uint8_t	dlength[3];
+	struct scsi_lun	lun;
+	itt_t	 itt;	/* Initiator Task Tag */
+	__be32	ttt;	/* Target Transfer Tag */
+	__be32	statsn;
+	__be32	exp_cmdsn;
+	__be32	max_cmdsn;
+	__be32	r2tsn;
+	__be32	data_offset;
+	__be32	data_length;
+};
+
+/* SCSI Data Hdr */
+struct iscsi_data {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t rsvd2[2];
+	uint8_t rsvd3;
+	uint8_t dlength[3];
+	struct scsi_lun lun;
+	itt_t	 itt;
+	__be32	ttt;
+	__be32	rsvd4;
+	__be32	exp_statsn;
+	__be32	rsvd5;
+	__be32	datasn;
+	__be32	offset;
+	__be32	rsvd6;
+	/* Payload */
+};
+
+/* SCSI Data Response Hdr */
+struct iscsi_data_rsp {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t rsvd2;
+	uint8_t cmd_status;
+	uint8_t hlength;
+	uint8_t dlength[3];
+	struct scsi_lun	lun;
+	itt_t	 itt;
+	__be32	ttt;
+	__be32	statsn;
+	__be32	exp_cmdsn;
+	__be32	max_cmdsn;
+	__be32	datasn;
+	__be32	offset;
+	__be32	residual_count;
+};
+
+/* Data Response PDU flags */
+#define ISCSI_FLAG_DATA_ACK		0x40
+#define ISCSI_FLAG_DATA_OVERFLOW	0x04
+#define ISCSI_FLAG_DATA_UNDERFLOW	0x02
+#define ISCSI_FLAG_DATA_STATUS		0x01
+
+/* Text Header */
+struct iscsi_text {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t rsvd2[2];
+	uint8_t hlength;
+	uint8_t dlength[3];
+	uint8_t rsvd4[8];
+	itt_t	 itt;
+	__be32	ttt;
+	__be32	cmdsn;
+	__be32	exp_statsn;
+	uint8_t rsvd5[16];
+	/* Text - key=value pairs */
+};
+
+#define ISCSI_FLAG_TEXT_CONTINUE	0x40
+
+/* Text Response Header */
+struct iscsi_text_rsp {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t rsvd2[2];
+	uint8_t hlength;
+	uint8_t dlength[3];
+	uint8_t rsvd4[8];
+	itt_t	 itt;
+	__be32	ttt;
+	__be32	statsn;
+	__be32	exp_cmdsn;
+	__be32	max_cmdsn;
+	uint8_t rsvd5[12];
+	/* Text Response - key:value pairs */
+};
+
+/* Login Header */
+struct iscsi_login_req {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t max_version;	/* Max. version supported */
+	uint8_t min_version;	/* Min. version supported */
+	uint8_t hlength;
+	uint8_t dlength[3];
+	uint8_t isid[6];	/* Initiator Session ID */
+	__be16	tsih;	/* Target Session Handle */
+	itt_t	 itt;	/* Initiator Task Tag */
+	__be16	cid;
+	__be16	rsvd3;
+	__be32	cmdsn;
+	__be32	exp_statsn;
+	uint8_t rsvd5[16];
+};
+
+/* Login PDU flags */
+#define ISCSI_FLAG_LOGIN_TRANSIT		0x80
+#define ISCSI_FLAG_LOGIN_CONTINUE		0x40
+#define ISCSI_FLAG_LOGIN_CURRENT_STAGE_MASK	0x0C	/* 2 bits */
+#define ISCSI_FLAG_LOGIN_CURRENT_STAGE1		0x04
+#define ISCSI_FLAG_LOGIN_CURRENT_STAGE2		0x08
+#define ISCSI_FLAG_LOGIN_CURRENT_STAGE3		0x0C
+#define ISCSI_FLAG_LOGIN_NEXT_STAGE_MASK	0x03	/* 2 bits */
+#define ISCSI_FLAG_LOGIN_NEXT_STAGE1		0x01
+#define ISCSI_FLAG_LOGIN_NEXT_STAGE2		0x02
+#define ISCSI_FLAG_LOGIN_NEXT_STAGE3		0x03
+
+#define ISCSI_LOGIN_CURRENT_STAGE(flags) \
+	((flags & ISCSI_FLAG_LOGIN_CURRENT_STAGE_MASK) >> 2)
+#define ISCSI_LOGIN_NEXT_STAGE(flags) \
+	(flags & ISCSI_FLAG_LOGIN_NEXT_STAGE_MASK)
+
+/* Login Response Header */
+struct iscsi_login_rsp {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t max_version;	/* Max. version supported */
+	uint8_t active_version;	/* Active version */
+	uint8_t hlength;
+	uint8_t dlength[3];
+	uint8_t isid[6];	/* Initiator Session ID */
+	__be16	tsih;	/* Target Session Handle */
+	itt_t	 itt;	/* Initiator Task Tag */
+	__be32	rsvd3;
+	__be32	statsn;
+	__be32	exp_cmdsn;
+	__be32	max_cmdsn;
+	uint8_t status_class;	/* see Login RSP ststus classes below */
+	uint8_t status_detail;	/* see Login RSP Status details below */
+	uint8_t rsvd4[10];
+};
+
+/* Login stage (phase) codes for CSG, NSG */
+#define ISCSI_INITIAL_LOGIN_STAGE		-1
+#define ISCSI_SECURITY_NEGOTIATION_STAGE	0
+#define ISCSI_OP_PARMS_NEGOTIATION_STAGE	1
+#define ISCSI_FULL_FEATURE_PHASE		3
+
+/* Login Status response classes */
+#define ISCSI_STATUS_CLS_SUCCESS		0x00
+#define ISCSI_STATUS_CLS_REDIRECT		0x01
+#define ISCSI_STATUS_CLS_INITIATOR_ERR		0x02
+#define ISCSI_STATUS_CLS_TARGET_ERR		0x03
+
+/* Login Status response detail codes */
+/* Class-0 (Success) */
+#define ISCSI_LOGIN_STATUS_ACCEPT		0x00
+
+/* Class-1 (Redirection) */
+#define ISCSI_LOGIN_STATUS_TGT_MOVED_TEMP	0x01
+#define ISCSI_LOGIN_STATUS_TGT_MOVED_PERM	0x02
+
+/* Class-2 (Initiator Error) */
+#define ISCSI_LOGIN_STATUS_INIT_ERR		0x00
+#define ISCSI_LOGIN_STATUS_AUTH_FAILED		0x01
+#define ISCSI_LOGIN_STATUS_TGT_FORBIDDEN	0x02
+#define ISCSI_LOGIN_STATUS_TGT_NOT_FOUND	0x03
+#define ISCSI_LOGIN_STATUS_TGT_REMOVED		0x04
+#define ISCSI_LOGIN_STATUS_NO_VERSION		0x05
+#define ISCSI_LOGIN_STATUS_ISID_ERROR		0x06
+#define ISCSI_LOGIN_STATUS_MISSING_FIELDS	0x07
+#define ISCSI_LOGIN_STATUS_CONN_ADD_FAILED	0x08
+#define ISCSI_LOGIN_STATUS_NO_SESSION_TYPE	0x09
+#define ISCSI_LOGIN_STATUS_NO_SESSION		0x0a
+#define ISCSI_LOGIN_STATUS_INVALID_REQUEST	0x0b
+
+/* Class-3 (Target Error) */
+#define ISCSI_LOGIN_STATUS_TARGET_ERROR		0x00
+#define ISCSI_LOGIN_STATUS_SVC_UNAVAILABLE	0x01
+#define ISCSI_LOGIN_STATUS_NO_RESOURCES		0x02
+
+/* Logout Header */
+struct iscsi_logout {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t rsvd1[2];
+	uint8_t hlength;
+	uint8_t dlength[3];
+	uint8_t rsvd2[8];
+	itt_t	 itt;	/* Initiator Task Tag */
+	__be16	cid;
+	uint8_t rsvd3[2];
+	__be32	cmdsn;
+	__be32	exp_statsn;
+	uint8_t rsvd4[16];
+};
+
+/* Logout PDU flags */
+#define ISCSI_FLAG_LOGOUT_REASON_MASK	0x7F
+
+/* logout reason_code values */
+
+#define ISCSI_LOGOUT_REASON_CLOSE_SESSION	0
+#define ISCSI_LOGOUT_REASON_CLOSE_CONNECTION	1
+#define ISCSI_LOGOUT_REASON_RECOVERY		2
+#define ISCSI_LOGOUT_REASON_AEN_REQUEST		3
+
+/* Logout Response Header */
+struct iscsi_logout_rsp {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t response;	/* see Logout response values below */
+	uint8_t rsvd2;
+	uint8_t hlength;
+	uint8_t dlength[3];
+	uint8_t rsvd3[8];
+	itt_t	 itt;	/* Initiator Task Tag */
+	__be32	rsvd4;
+	__be32	statsn;
+	__be32	exp_cmdsn;
+	__be32	max_cmdsn;
+	__be32	rsvd5;
+	__be16	t2wait;
+	__be16	t2retain;
+	__be32	rsvd6;
+};
+
+/* logout response status values */
+
+#define ISCSI_LOGOUT_SUCCESS			0
+#define ISCSI_LOGOUT_CID_NOT_FOUND		1
+#define ISCSI_LOGOUT_RECOVERY_UNSUPPORTED	2
+#define ISCSI_LOGOUT_CLEANUP_FAILED		3
+
+/* SNACK Header */
+struct iscsi_snack {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t rsvd2[2];
+	uint8_t hlength;
+	uint8_t dlength[3];
+	uint8_t lun[8];
+	itt_t	 itt;
+	__be32  ttt;
+	uint8_t rsvd3[4];
+	__be32  exp_statsn;
+	uint8_t rsvd4[8];
+	__be32	begrun;
+	__be32	runlength;
+};
+
+/* SNACK PDU flags */
+#define ISCSI_FLAG_SNACK_TYPE_DATA		0
+#define ISCSI_FLAG_SNACK_TYPE_R2T		0
+#define ISCSI_FLAG_SNACK_TYPE_STATUS		1
+#define ISCSI_FLAG_SNACK_TYPE_DATA_ACK		2
+#define ISCSI_FLAG_SNACK_TYPE_RDATA		3
+#define ISCSI_FLAG_SNACK_TYPE_MASK	0x0F	/* 4 bits */
+
+/* Reject Message Header */
+struct iscsi_reject {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t reason;
+	uint8_t rsvd2;
+	uint8_t hlength;
+	uint8_t dlength[3];
+	uint8_t rsvd3[8];
+	__be32  ffffffff;
+	uint8_t rsvd4[4];
+	__be32	statsn;
+	__be32	exp_cmdsn;
+	__be32	max_cmdsn;
+	__be32	datasn;
+	uint8_t rsvd5[8];
+	/* Text - Rejected hdr */
+};
+
+/* Reason for Reject */
+#define ISCSI_REASON_CMD_BEFORE_LOGIN	1
+#define ISCSI_REASON_DATA_DIGEST_ERROR	2
+#define ISCSI_REASON_DATA_SNACK_REJECT	3
+#define ISCSI_REASON_PROTOCOL_ERROR	4
+#define ISCSI_REASON_CMD_NOT_SUPPORTED	5
+#define ISCSI_REASON_IMM_CMD_REJECT		6
+#define ISCSI_REASON_TASK_IN_PROGRESS	7
+#define ISCSI_REASON_INVALID_SNACK		8
+#define ISCSI_REASON_BOOKMARK_INVALID	9
+#define ISCSI_REASON_BOOKMARK_NO_RESOURCES	10
+#define ISCSI_REASON_NEGOTIATION_RESET	11
+
+/* Max. number of Key=Value pairs in a text message */
+#define MAX_KEY_VALUE_PAIRS	8192
+
+/* maximum length for text keys/values */
+#define KEY_MAXLEN		64
+#define VALUE_MAXLEN		255
+#define TARGET_NAME_MAXLEN	VALUE_MAXLEN
+
+#define ISCSI_DEF_MAX_RECV_SEG_LEN		8192
+#define ISCSI_MIN_MAX_RECV_SEG_LEN		512
+#define ISCSI_MAX_MAX_RECV_SEG_LEN		16777215
+
+#define ISCSI_DEF_FIRST_BURST_LEN		65536
+#define ISCSI_MIN_FIRST_BURST_LEN		512
+#define ISCSI_MAX_FIRST_BURST_LEN		16777215
+
+#define ISCSI_DEF_MAX_BURST_LEN			262144
+#define ISCSI_MIN_MAX_BURST_LEN			512
+#define ISCSI_MAX_MAX_BURST_LEN			16777215
+
+#define ISCSI_DEF_TIME2WAIT			2
+
+/************************* RFC 3720 End *****************************/
+
+#endif /* ISCSI_PROTO_H */
diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h
new file mode 100644
index 00000000..8f9dfba3
--- /dev/null
+++ b/include/scsi/libfc.h
@@ -0,0 +1,1139 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _LIBFC_H_
+#define _LIBFC_H_
+
+#include <linux/timer.h>
+#include <linux/if.h>
+#include <linux/percpu.h>
+
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_fc.h>
+#include <scsi/scsi_bsg_fc.h>
+
+#include <scsi/fc/fc_fcp.h>
+#include <scsi/fc/fc_ns.h>
+#include <scsi/fc/fc_ms.h>
+#include <scsi/fc/fc_els.h>
+#include <scsi/fc/fc_gs.h>
+
+#include <scsi/fc_frame.h>
+
+#define	FC_FC4_PROV_SIZE	(FC_TYPE_FCP + 1)	/* size of tables */
+
+/*
+ * libfc error codes
+ */
+#define	FC_NO_ERR	0	/* no error */
+#define	FC_EX_TIMEOUT	1	/* Exchange timeout */
+#define	FC_EX_CLOSED	2	/* Exchange closed */
+
+/**
+ * enum fc_lport_state - Local port states
+ * @LPORT_ST_DISABLED: Disabled
+ * @LPORT_ST_FLOGI:    Fabric login (FLOGI) sent
+ * @LPORT_ST_DNS:      Waiting for name server remote port to become ready
+ * @LPORT_ST_RPN_ID:   Register port name by ID (RPN_ID) sent
+ * @LPORT_ST_RFT_ID:   Register Fibre Channel types by ID (RFT_ID) sent
+ * @LPORT_ST_RFF_ID:   Register FC-4 Features by ID (RFF_ID) sent
+ * @LPORT_ST_FDMI:     Waiting for mgmt server rport to become ready
+ * @LPORT_ST_RHBA:
+ * @LPORT_ST_SCR:      State Change Register (SCR) sent
+ * @LPORT_ST_READY:    Ready for use
+ * @LPORT_ST_LOGO:     Local port logout (LOGO) sent
+ * @LPORT_ST_RESET:    Local port reset
+ */
+enum fc_lport_state {
+	LPORT_ST_DISABLED = 0,
+	LPORT_ST_FLOGI,
+	LPORT_ST_DNS,
+	LPORT_ST_RNN_ID,
+	LPORT_ST_RSNN_NN,
+	LPORT_ST_RSPN_ID,
+	LPORT_ST_RFT_ID,
+	LPORT_ST_RFF_ID,
+	LPORT_ST_FDMI,
+	LPORT_ST_RHBA,
+	LPORT_ST_RPA,
+	LPORT_ST_DHBA,
+	LPORT_ST_DPRT,
+	LPORT_ST_SCR,
+	LPORT_ST_READY,
+	LPORT_ST_LOGO,
+	LPORT_ST_RESET
+};
+
+enum fc_disc_event {
+	DISC_EV_NONE = 0,
+	DISC_EV_SUCCESS,
+	DISC_EV_FAILED
+};
+
+/**
+ * enum fc_rport_state - Remote port states
+ * @RPORT_ST_INIT:    Initialized
+ * @RPORT_ST_FLOGI:   Waiting for FLOGI completion for point-to-multipoint
+ * @RPORT_ST_PLOGI_WAIT:   Waiting for peer to login for point-to-multipoint
+ * @RPORT_ST_PLOGI:   Waiting for PLOGI completion
+ * @RPORT_ST_PRLI:    Waiting for PRLI completion
+ * @RPORT_ST_RTV:     Waiting for RTV completion
+ * @RPORT_ST_READY:   Ready for use
+ * @RPORT_ST_ADISC:   Discover Address sent
+ * @RPORT_ST_DELETE:  Remote port being deleted
+*/
+enum fc_rport_state {
+	RPORT_ST_INIT,
+	RPORT_ST_FLOGI,
+	RPORT_ST_PLOGI_WAIT,
+	RPORT_ST_PLOGI,
+	RPORT_ST_PRLI,
+	RPORT_ST_RTV,
+	RPORT_ST_READY,
+	RPORT_ST_ADISC,
+	RPORT_ST_DELETE,
+};
+
+/**
+ * struct fc_disc_port - temporary discovery port to hold rport identifiers
+ * @lp:         Fibre Channel host port instance
+ * @peers:      Node for list management during discovery and RSCN processing
+ * @rport_work: Work struct for starting the rport state machine
+ * @port_id:    Port ID of the discovered port
+ */
+struct fc_disc_port {
+	struct fc_lport    *lp;
+	struct list_head   peers;
+	struct work_struct rport_work;
+	u32                port_id;
+};
+
+/**
+ * enum fc_rport_event - Remote port events
+ * @RPORT_EV_NONE:   No event
+ * @RPORT_EV_READY:  Remote port is ready for use
+ * @RPORT_EV_FAILED: State machine failed, remote port is not ready
+ * @RPORT_EV_STOP:   Remote port has been stopped
+ * @RPORT_EV_LOGO:   Remote port logout (LOGO) sent
+ */
+enum fc_rport_event {
+	RPORT_EV_NONE = 0,
+	RPORT_EV_READY,
+	RPORT_EV_FAILED,
+	RPORT_EV_STOP,
+	RPORT_EV_LOGO
+};
+
+struct fc_rport_priv;
+
+/**
+ * struct fc_rport_operations - Operations for a remote port
+ * @event_callback: Function to be called for remote port events
+ */
+struct fc_rport_operations {
+	void (*event_callback)(struct fc_lport *, struct fc_rport_priv *,
+			       enum fc_rport_event);
+};
+
+/**
+ * struct fc_rport_libfc_priv - libfc internal information about a remote port
+ * @local_port: The associated local port
+ * @rp_state:   Indicates READY for I/O or DELETE when blocked
+ * @flags:      REC and RETRY supported flags
+ * @e_d_tov:    Error detect timeout value (in msec)
+ * @r_a_tov:    Resource allocation timeout value (in msec)
+ */
+struct fc_rport_libfc_priv {
+	struct fc_lport		   *local_port;
+	enum fc_rport_state        rp_state;
+	u16			   flags;
+	#define FC_RP_FLAGS_REC_SUPPORTED	(1 << 0)
+	#define FC_RP_FLAGS_RETRY		(1 << 1)
+	#define FC_RP_STARTED			(1 << 2)
+	#define FC_RP_FLAGS_CONF_REQ		(1 << 3)
+	unsigned int	           e_d_tov;
+	unsigned int	           r_a_tov;
+};
+
+/**
+ * struct fc_rport_priv - libfc remote port and discovery info
+ * @local_port:     The associated local port
+ * @rport:          The FC transport remote port
+ * @kref:           Reference counter
+ * @rp_state:       Enumeration that tracks progress of PLOGI, PRLI,
+ *                  and RTV exchanges
+ * @ids:            The remote port identifiers and roles
+ * @flags:          STARTED, REC and RETRY_SUPPORTED flags
+ * @max_seq:        Maximum number of concurrent sequences
+ * @disc_id:        The discovery identifier
+ * @maxframe_size:  The maximum frame size
+ * @retries:        The retry count for the current state
+ * @major_retries:  The retry count for the entire PLOGI/PRLI state machine
+ * @e_d_tov:        Error detect timeout value (in msec)
+ * @r_a_tov:        Resource allocation timeout value (in msec)
+ * @rp_mutex:       The mutex that protects the remote port
+ * @retry_work:     Handle for retries
+ * @event_callback: Callback when READY, FAILED or LOGO states complete
+ * @prli_count:     Count of open PRLI sessions in providers
+ * @rcu:	    Structure used for freeing in an RCU-safe manner
+ */
+struct fc_rport_priv {
+	struct fc_lport		    *local_port;
+	struct fc_rport		    *rport;
+	struct kref		    kref;
+	enum fc_rport_state         rp_state;
+	struct fc_rport_identifiers ids;
+	u16			    flags;
+	u16		            max_seq;
+	u16			    disc_id;
+	u16			    maxframe_size;
+	unsigned int	            retries;
+	unsigned int	            major_retries;
+	unsigned int	            e_d_tov;
+	unsigned int	            r_a_tov;
+	struct mutex                rp_mutex;
+	struct delayed_work	    retry_work;
+	enum fc_rport_event         event;
+	struct fc_rport_operations  *ops;
+	struct list_head            peers;
+	struct work_struct          event_work;
+	u32			    supported_classes;
+	u16                         prli_count;
+	struct rcu_head		    rcu;
+	u16			    sp_features;
+	u8			    spp_type;
+	void			    (*lld_event_callback)(struct fc_lport *,
+						      struct fc_rport_priv *,
+						      enum fc_rport_event);
+};
+
+/**
+ * struct fcoe_dev_stats - fcoe stats structure
+ * @SecondsSinceLastReset: Seconds since the last reset
+ * @TxFrames:              Number of transmitted frames
+ * @TxWords:               Number of transmitted words
+ * @RxFrames:              Number of received frames
+ * @RxWords:               Number of received words
+ * @ErrorFrames:           Number of received error frames
+ * @DumpedFrames:          Number of dumped frames
+ * @LinkFailureCount:      Number of link failures
+ * @LossOfSignalCount:     Number for signal losses
+ * @InvalidTxWordCount:    Number of invalid transmitted words
+ * @InvalidCRCCount:       Number of invalid CRCs
+ * @InputRequests:         Number of input requests
+ * @OutputRequests:        Number of output requests
+ * @ControlRequests:       Number of control requests
+ * @InputBytes:            Number of received bytes
+ * @OutputBytes:           Number of transmitted bytes
+ * @VLinkFailureCount:     Number of virtual link failures
+ * @MissDiscAdvCount:      Number of missing FIP discovery advertisement
+ */
+struct fcoe_dev_stats {
+	u64		SecondsSinceLastReset;
+	u64		TxFrames;
+	u64		TxWords;
+	u64		RxFrames;
+	u64		RxWords;
+	u64		ErrorFrames;
+	u64		DumpedFrames;
+	u64		LinkFailureCount;
+	u64		LossOfSignalCount;
+	u64		InvalidTxWordCount;
+	u64		InvalidCRCCount;
+	u64		InputRequests;
+	u64		OutputRequests;
+	u64		ControlRequests;
+	u64		InputBytes;
+	u64		OutputBytes;
+	u64		VLinkFailureCount;
+	u64		MissDiscAdvCount;
+};
+
+/**
+ * struct fc_seq_els_data - ELS data used for passing ELS specific responses
+ * @reason: The reason for rejection
+ * @explan: The explanation of the rejection
+ *
+ * Mainly used by the exchange manager layer.
+ */
+struct fc_seq_els_data {
+	enum fc_els_rjt_reason reason;
+	enum fc_els_rjt_explan explan;
+};
+
+/**
+ * struct fc_fcp_pkt - FCP request structure (one for each scsi_cmnd request)
+ * @lp:              The associated local port
+ * @state:           The state of the I/O
+ * @ref_cnt:         Reference count
+ * @scsi_pkt_lock:   Lock to protect the SCSI packet (must be taken before the
+ *                   host_lock if both are to be held at the same time)
+ * @cmd:             The SCSI command (set and clear with the host_lock held)
+ * @list:            Tracks queued commands (accessed with the host_lock held)
+ * @timer:           The command timer
+ * @tm_done:         Completion indicator
+ * @wait_for_comp:   Indicator to wait for completion of the I/O (in jiffies)
+ * @data_len:        The length of the data
+ * @cdb_cmd:         The CDB command
+ * @xfer_len:        The transfer length
+ * @xfer_ddp:        Indicates if this transfer used DDP (XID of the exchange
+ *                   will be set here if DDP was setup)
+ * @xfer_contig_end: The offset into the buffer if the buffer is contiguous
+ *                   (Tx and Rx)
+ * @max_payload:     The maximum payload size (in bytes)
+ * @io_status:       SCSI result (upper 24 bits)
+ * @cdb_status:      CDB status
+ * @status_code:     FCP I/O status
+ * @scsi_comp_flags: Completion flags (bit 3 Underrun bit 2: overrun)
+ * @req_flags:       Request flags (bit 0: read bit:1 write)
+ * @scsi_resid:      SCSI residule length
+ * @rport:           The remote port that the SCSI command is targeted at
+ * @seq_ptr:         The sequence that will carry the SCSI command
+ * @recov_retry:     Number of recovery retries
+ * @recov_seq:       The sequence for REC or SRR
+ */
+struct fc_fcp_pkt {
+	spinlock_t	  scsi_pkt_lock;
+	atomic_t	  ref_cnt;
+
+	/* SCSI command and data transfer information */
+	u32		  data_len;
+
+	/* SCSI I/O related information */
+	struct scsi_cmnd  *cmd;
+	struct list_head  list;
+
+	/* Housekeeping information */
+	struct fc_lport   *lp;
+	u8		  state;
+
+	/* SCSI/FCP return status */
+	u8		  cdb_status;
+	u8		  status_code;
+	u8		  scsi_comp_flags;
+	u32		  io_status;
+	u32		  req_flags;
+	u32		  scsi_resid;
+
+	/* Transport related veriables */
+	size_t		  xfer_len;
+	struct fcp_cmnd   cdb_cmd;
+	u32		  xfer_contig_end;
+	u16		  max_payload;
+	u16		  xfer_ddp;
+
+	/* Associated structures */
+	struct fc_rport	  *rport;
+	struct fc_seq	  *seq_ptr;
+
+	/* Timeout/error related information */
+	struct timer_list timer;
+	int	          wait_for_comp;
+	u32		  recov_retry;
+	struct fc_seq	  *recov_seq;
+	struct completion tm_done;
+} ____cacheline_aligned_in_smp;
+
+/*
+ * Structure and function definitions for managing Fibre Channel Exchanges
+ * and Sequences
+ *
+ * fc_exch holds state for one exchange and links to its active sequence.
+ *
+ * fc_seq holds the state for an individual sequence.
+ */
+
+struct fc_exch_mgr;
+struct fc_exch_mgr_anchor;
+extern u16 fc_cpu_mask;	/* cpu mask for possible cpus */
+
+/**
+ * struct fc_seq - FC sequence
+ * @id:       The sequence ID
+ * @ssb_stat: Status flags for the sequence status block (SSB)
+ * @cnt:      Number of frames sent so far
+ * @rec_data: FC-4 value for REC
+ */
+struct fc_seq {
+	u8  id;
+	u16 ssb_stat;
+	u16 cnt;
+	u32 rec_data;
+};
+
+#define FC_EX_DONE		(1 << 0) /* ep is completed */
+#define FC_EX_RST_CLEANUP	(1 << 1) /* reset is forcing completion */
+
+/**
+ * struct fc_exch - Fibre Channel Exchange
+ * @em:           Exchange manager
+ * @pool:         Exchange pool
+ * @state:        The exchange's state
+ * @xid:          The exchange ID
+ * @ex_list:      Handle used by the EM to track free exchanges
+ * @ex_lock:      Lock that protects the exchange
+ * @ex_refcnt:    Reference count
+ * @timeout_work: Handle for timeout handler
+ * @lp:           The local port that this exchange is on
+ * @oxid:         Originator's exchange ID
+ * @rxid:         Responder's exchange ID
+ * @oid:          Originator's FCID
+ * @sid:          Source FCID
+ * @did:          Destination FCID
+ * @esb_stat:     ESB exchange status
+ * @r_a_tov:      Resouce allocation time out value (in msecs)
+ * @seq_id:       The next sequence ID to use
+ * @encaps:       encapsulation information for lower-level driver
+ * @f_ctl:        F_CTL flags for the sequence
+ * @fh_type:      The frame type
+ * @class:        The class of service
+ * @seq:          The sequence in use on this exchange
+ * @resp:         Callback for responses on this exchange
+ * @destructor:   Called when destroying the exchange
+ * @arg:          Passed as a void pointer to the resp() callback
+ *
+ * Locking notes: The ex_lock protects following items:
+ *	state, esb_stat, f_ctl, seq.ssb_stat
+ *	seq_id
+ *	sequence allocation
+ */
+struct fc_exch {
+	spinlock_t	    ex_lock;
+	atomic_t	    ex_refcnt;
+	enum fc_class	    class;
+	struct fc_exch_mgr  *em;
+	struct fc_exch_pool *pool;
+	struct list_head    ex_list;
+	struct fc_lport	    *lp;
+	u32		    esb_stat;
+	u8		    state;
+	u8		    fh_type;
+	u8		    seq_id;
+	u8		    encaps;
+	u16		    xid;
+	u16		    oxid;
+	u16		    rxid;
+	u32		    oid;
+	u32		    sid;
+	u32		    did;
+	u32		    r_a_tov;
+	u32		    f_ctl;
+	struct fc_seq       seq;
+	void		    (*resp)(struct fc_seq *, struct fc_frame *, void *);
+	void		    *arg;
+	void		    (*destructor)(struct fc_seq *, void *);
+	struct delayed_work timeout_work;
+} ____cacheline_aligned_in_smp;
+#define	fc_seq_exch(sp) container_of(sp, struct fc_exch, seq)
+
+
+struct libfc_function_template {
+	/*
+	 * Interface to send a FC frame
+	 *
+	 * STATUS: REQUIRED
+	 */
+	int (*frame_send)(struct fc_lport *, struct fc_frame *);
+
+	/*
+	 * Interface to send ELS/CT frames
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	struct fc_seq *(*elsct_send)(struct fc_lport *, u32 did,
+				     struct fc_frame *, unsigned int op,
+				     void (*resp)(struct fc_seq *,
+					     struct fc_frame *, void *arg),
+				     void *arg, u32 timer_msec);
+
+	/*
+	 * Send the FC frame payload using a new exchange and sequence.
+	 *
+	 * The exchange response handler is set in this routine to resp()
+	 * function pointer. It can be called in two scenarios: if a timeout
+	 * occurs or if a response frame is received for the exchange. The
+	 * fc_frame pointer in response handler will also indicate timeout
+	 * as error using IS_ERR related macros.
+	 *
+	 * The exchange destructor handler is also set in this routine.
+	 * The destructor handler is invoked by EM layer when exchange
+	 * is about to free, this can be used by caller to free its
+	 * resources along with exchange free.
+	 *
+	 * The arg is passed back to resp and destructor handler.
+	 *
+	 * The timeout value (in msec) for an exchange is set if non zero
+	 * timer_msec argument is specified. The timer is canceled when
+	 * it fires or when the exchange is done. The exchange timeout handler
+	 * is registered by EM layer.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	struct fc_seq *(*exch_seq_send)(struct fc_lport *, struct fc_frame *,
+					void (*resp)(struct fc_seq *,
+						     struct fc_frame *,
+						     void *),
+					void (*destructor)(struct fc_seq *,
+							   void *),
+					void *, unsigned int timer_msec);
+
+	/*
+	 * Sets up the DDP context for a given exchange id on the given
+	 * scatterlist if LLD supports DDP for large receive.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	int (*ddp_setup)(struct fc_lport *, u16, struct scatterlist *,
+			 unsigned int);
+	/*
+	 * Completes the DDP transfer and returns the length of data DDPed
+	 * for the given exchange id.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	int (*ddp_done)(struct fc_lport *, u16);
+	/*
+	 * Sets up the DDP context for a given exchange id on the given
+	 * scatterlist if LLD supports DDP for FCoE target.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	int (*ddp_target)(struct fc_lport *, u16, struct scatterlist *,
+			  unsigned int);
+	/*
+	 * Allow LLD to fill its own Link Error Status Block
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	void (*get_lesb)(struct fc_lport *, struct fc_els_lesb *lesb);
+	/*
+	 * Send a frame using an existing sequence and exchange.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	int (*seq_send)(struct fc_lport *, struct fc_seq *,
+			struct fc_frame *);
+
+	/*
+	 * Send an ELS response using information from the received frame.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	void (*seq_els_rsp_send)(struct fc_frame *, enum fc_els_cmd,
+				 struct fc_seq_els_data *);
+
+	/*
+	 * Abort an exchange and sequence. Generally called because of a
+	 * exchange timeout or an abort from the upper layer.
+	 *
+	 * A timer_msec can be specified for abort timeout, if non-zero
+	 * timer_msec value is specified then exchange resp handler
+	 * will be called with timeout error if no response to abort.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	int (*seq_exch_abort)(const struct fc_seq *,
+			      unsigned int timer_msec);
+
+	/*
+	 * Indicate that an exchange/sequence tuple is complete and the memory
+	 * allocated for the related objects may be freed.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	void (*exch_done)(struct fc_seq *);
+
+	/*
+	 * Start a new sequence on the same exchange/sequence tuple.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	struct fc_seq *(*seq_start_next)(struct fc_seq *);
+
+	/*
+	 * Set a response handler for the exchange of the sequence.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	void (*seq_set_resp)(struct fc_seq *sp,
+			     void (*resp)(struct fc_seq *, struct fc_frame *,
+					  void *),
+			     void *arg);
+
+	/*
+	 * Assign a sequence for an incoming request frame.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	struct fc_seq *(*seq_assign)(struct fc_lport *, struct fc_frame *);
+
+	/*
+	 * Release the reference on the sequence returned by seq_assign().
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	void (*seq_release)(struct fc_seq *);
+
+	/*
+	 * Reset an exchange manager, completing all sequences and exchanges.
+	 * If s_id is non-zero, reset only exchanges originating from that FID.
+	 * If d_id is non-zero, reset only exchanges sending to that FID.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	void (*exch_mgr_reset)(struct fc_lport *, u32 s_id, u32 d_id);
+
+	/*
+	 * Flush the rport work queue. Generally used before shutdown.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	void (*rport_flush_queue)(void);
+
+	/*
+	 * Receive a frame for a local port.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	void (*lport_recv)(struct fc_lport *, struct fc_frame *);
+
+	/*
+	 * Reset the local port.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	int (*lport_reset)(struct fc_lport *);
+
+	/*
+	 * Set the local port FC_ID.
+	 *
+	 * This may be provided by the LLD to allow it to be
+	 * notified when the local port is assigned a FC-ID.
+	 *
+	 * The frame, if non-NULL, is the incoming frame with the
+	 * FLOGI LS_ACC or FLOGI, and may contain the granted MAC
+	 * address for the LLD.  The frame pointer may be NULL if
+	 * no MAC is associated with this assignment (LOGO or PLOGI).
+	 *
+	 * If FC_ID is non-zero, r_a_tov and e_d_tov must be valid.
+	 *
+	 * Note: this is called with the local port mutex held.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	void (*lport_set_port_id)(struct fc_lport *, u32 port_id,
+				  struct fc_frame *);
+
+	/*
+	 * Create a remote port with a given port ID
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	struct fc_rport_priv *(*rport_create)(struct fc_lport *, u32);
+
+	/*
+	 * Initiates the RP state machine. It is called from the LP module.
+	 * This function will issue the following commands to the N_Port
+	 * identified by the FC ID provided.
+	 *
+	 * - PLOGI
+	 * - PRLI
+	 * - RTV
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	int (*rport_login)(struct fc_rport_priv *);
+
+	/*
+	 * Logoff, and remove the rport from the transport if
+	 * it had been added. This will send a LOGO to the target.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	int (*rport_logoff)(struct fc_rport_priv *);
+
+	/*
+	 * Receive a request from a remote port.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	void (*rport_recv_req)(struct fc_lport *, struct fc_frame *);
+
+	/*
+	 * lookup an rport by it's port ID.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	struct fc_rport_priv *(*rport_lookup)(const struct fc_lport *, u32);
+
+	/*
+	 * Destroy an rport after final kref_put().
+	 * The argument is a pointer to the kref inside the fc_rport_priv.
+	 */
+	void (*rport_destroy)(struct kref *);
+
+	/*
+	 * Callback routine after the remote port is logged in
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	void (*rport_event_callback)(struct fc_lport *,
+				     struct fc_rport_priv *,
+				     enum fc_rport_event);
+
+	/*
+	 * Send a fcp cmd from fsp pkt.
+	 * Called with the SCSI host lock unlocked and irqs disabled.
+	 *
+	 * The resp handler is called when FCP_RSP received.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	int (*fcp_cmd_send)(struct fc_lport *, struct fc_fcp_pkt *,
+			    void (*resp)(struct fc_seq *, struct fc_frame *,
+					 void *));
+
+	/*
+	 * Cleanup the FCP layer, used during link down and reset
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	void (*fcp_cleanup)(struct fc_lport *);
+
+	/*
+	 * Abort all I/O on a local port
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	void (*fcp_abort_io)(struct fc_lport *);
+
+	/*
+	 * Receive a request for the discovery layer.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	void (*disc_recv_req)(struct fc_lport *, struct fc_frame *);
+
+	/*
+	 * Start discovery for a local port.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	void (*disc_start)(void (*disc_callback)(struct fc_lport *,
+						 enum fc_disc_event),
+			   struct fc_lport *);
+
+	/*
+	 * Stop discovery for a given lport. This will remove
+	 * all discovered rports
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	void (*disc_stop) (struct fc_lport *);
+
+	/*
+	 * Stop discovery for a given lport. This will block
+	 * until all discovered rports are deleted from the
+	 * FC transport class
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	void (*disc_stop_final) (struct fc_lport *);
+};
+
+/**
+ * struct fc_disc - Discovery context
+ * @retry_count:   Number of retries
+ * @pending:       1 if discovery is pending, 0 if not
+ * @requested:     1 if discovery has been requested, 0 if not
+ * @seq_count:     Number of sequences used for discovery
+ * @buf_len:       Length of the discovery buffer
+ * @disc_id:       Discovery ID
+ * @rports:        List of discovered remote ports
+ * @priv:          Private pointer for use by discovery code
+ * @disc_mutex:    Mutex that protects the discovery context
+ * @partial_buf:   Partial name buffer (if names are returned
+ *                 in multiple frames)
+ * @disc_work:     handle for delayed work context
+ * @disc_callback: Callback routine called when discovery completes
+ */
+struct fc_disc {
+	unsigned char         retry_count;
+	unsigned char         pending;
+	unsigned char         requested;
+	unsigned short        seq_count;
+	unsigned char         buf_len;
+	u16                   disc_id;
+
+	struct list_head      rports;
+	void		      *priv;
+	struct mutex	      disc_mutex;
+	struct fc_gpn_ft_resp partial_buf;
+	struct delayed_work   disc_work;
+
+	void (*disc_callback)(struct fc_lport *,
+			      enum fc_disc_event);
+};
+
+/*
+ * Local port notifier and events.
+ */
+extern struct blocking_notifier_head fc_lport_notifier_head;
+enum fc_lport_event {
+	FC_LPORT_EV_ADD,
+	FC_LPORT_EV_DEL,
+};
+
+/**
+ * struct fc_lport - Local port
+ * @host:                  The SCSI host associated with a local port
+ * @ema_list:              Exchange manager anchor list
+ * @dns_rdata:             The directory server remote port
+ * @ms_rdata:		   The management server remote port
+ * @ptp_rdata:             Point to point remote port
+ * @scsi_priv:             FCP layer internal data
+ * @disc:                  Discovery context
+ * @vports:                Child vports if N_Port
+ * @vport:                 Parent vport if VN_Port
+ * @tt:                    Libfc function template
+ * @link_up:               Link state (1 = link up, 0 = link down)
+ * @qfull:                 Queue state (1 queue is full, 0 queue is not full)
+ * @state:                 Identifies the state
+ * @boot_time:             Timestamp indicating when the local port came online
+ * @host_stats:            SCSI host statistics
+ * @dev_stats:             FCoE device stats (TODO: libfc should not be
+ *                         FCoE aware)
+ * @retry_count:           Number of retries in the current state
+ * @port_id:               FC Port ID
+ * @wwpn:                  World Wide Port Name
+ * @wwnn:                  World Wide Node Name
+ * @service_params:        Common service parameters
+ * @e_d_tov:               Error detection timeout value
+ * @r_a_tov:               Resouce allocation timeout value
+ * @rnid_gen:              RNID information
+ * @sg_supp:               Indicates if scatter gather is supported
+ * @seq_offload:           Indicates if sequence offload is supported
+ * @crc_offload:           Indicates if CRC offload is supported
+ * @lro_enabled:           Indicates if large receive offload is supported
+ * @does_npiv:             Supports multiple vports
+ * @npiv_enabled:          Switch/fabric allows NPIV
+ * @mfs:                   The maximum Fibre Channel payload size
+ * @max_retry_count:       The maximum retry attempts
+ * @max_rport_retry_count: The maximum remote port retry attempts
+ * @rport_priv_size:       Size needed by driver after struct fc_rport_priv
+ * @lro_xid:               The maximum XID for LRO
+ * @lso_max:               The maximum large offload send size
+ * @fcts:                  FC-4 type mask
+ * @lp_mutex:              Mutex to protect the local port
+ * @list:                  Linkage on list of vport peers
+ * @retry_work:            Handle to local port for delayed retry context
+ * @prov:		   Pointers available for use by passive FC-4 providers
+ * @lport_list:            Linkage on module-wide list of local ports
+ */
+struct fc_lport {
+	/* Associations */
+	struct Scsi_Host	       *host;
+	struct list_head	       ema_list;
+	struct fc_rport_priv	       *dns_rdata;
+	struct fc_rport_priv	       *ms_rdata;
+	struct fc_rport_priv	       *ptp_rdata;
+	void			       *scsi_priv;
+	struct fc_disc                 disc;
+
+	/* Virtual port information */
+	struct list_head	       vports;
+	struct fc_vport		       *vport;
+
+	/* Operational Information */
+	struct libfc_function_template tt;
+	u8			       link_up;
+	u8			       qfull;
+	enum fc_lport_state	       state;
+	unsigned long		       boot_time;
+	struct fc_host_statistics      host_stats;
+	struct fcoe_dev_stats __percpu *dev_stats;
+	u8			       retry_count;
+
+	/* Fabric information */
+	u32                            port_id;
+	u64			       wwpn;
+	u64			       wwnn;
+	unsigned int		       service_params;
+	unsigned int		       e_d_tov;
+	unsigned int		       r_a_tov;
+	struct fc_els_rnid_gen	       rnid_gen;
+
+	/* Capabilities */
+	u32			       sg_supp:1;
+	u32			       seq_offload:1;
+	u32			       crc_offload:1;
+	u32			       lro_enabled:1;
+	u32			       does_npiv:1;
+	u32			       npiv_enabled:1;
+	u32			       point_to_multipoint:1;
+	u32			       fdmi_enabled:1;
+	u32			       mfs;
+	u8			       max_retry_count;
+	u8			       max_rport_retry_count;
+	u16			       rport_priv_size;
+	u16			       link_speed;
+	u16			       link_supported_speeds;
+	u16			       lro_xid;
+	unsigned int		       lso_max;
+	struct fc_ns_fts	       fcts;
+
+	/* Miscellaneous */
+	struct mutex                   lp_mutex;
+	struct list_head               list;
+	struct delayed_work	       retry_work;
+	void			       *prov[FC_FC4_PROV_SIZE];
+	struct list_head               lport_list;
+};
+
+/**
+ * struct fc4_prov - FC-4 provider registration
+ * @prli:               Handler for incoming PRLI
+ * @prlo:               Handler for session reset
+ * @recv:		Handler for incoming request
+ * @module:		Pointer to module.  May be NULL.
+ */
+struct fc4_prov {
+	int (*prli)(struct fc_rport_priv *, u32 spp_len,
+		    const struct fc_els_spp *spp_in,
+		    struct fc_els_spp *spp_out);
+	void (*prlo)(struct fc_rport_priv *);
+	void (*recv)(struct fc_lport *, struct fc_frame *);
+	struct module *module;
+};
+
+/*
+ * Register FC-4 provider with libfc.
+ */
+int fc_fc4_register_provider(enum fc_fh_type type, struct fc4_prov *);
+void fc_fc4_deregister_provider(enum fc_fh_type type, struct fc4_prov *);
+
+/*
+ * FC_LPORT HELPER FUNCTIONS
+ *****************************/
+
+/**
+ * fc_lport_test_ready() - Determine if a local port is in the READY state
+ * @lport: The local port to test
+ */
+static inline int fc_lport_test_ready(struct fc_lport *lport)
+{
+	return lport->state == LPORT_ST_READY;
+}
+
+/**
+ * fc_set_wwnn() - Set the World Wide Node Name of a local port
+ * @lport: The local port whose WWNN is to be set
+ * @wwnn:  The new WWNN
+ */
+static inline void fc_set_wwnn(struct fc_lport *lport, u64 wwnn)
+{
+	lport->wwnn = wwnn;
+}
+
+/**
+ * fc_set_wwpn() - Set the World Wide Port Name of a local port
+ * @lport: The local port whose WWPN is to be set
+ * @wwnn:  The new WWPN
+ */
+static inline void fc_set_wwpn(struct fc_lport *lport, u64 wwnn)
+{
+	lport->wwpn = wwnn;
+}
+
+/**
+ * fc_lport_state_enter() - Change a local port's state
+ * @lport: The local port whose state is to change
+ * @state: The new state
+ */
+static inline void fc_lport_state_enter(struct fc_lport *lport,
+					enum fc_lport_state state)
+{
+	if (state != lport->state)
+		lport->retry_count = 0;
+	lport->state = state;
+}
+
+/**
+ * fc_lport_init_stats() - Allocate per-CPU statistics for a local port
+ * @lport: The local port whose statistics are to be initialized
+ */
+static inline int fc_lport_init_stats(struct fc_lport *lport)
+{
+	lport->dev_stats = alloc_percpu(struct fcoe_dev_stats);
+	if (!lport->dev_stats)
+		return -ENOMEM;
+	return 0;
+}
+
+/**
+ * fc_lport_free_stats() - Free memory for a local port's statistics
+ * @lport: The local port whose statistics are to be freed
+ */
+static inline void fc_lport_free_stats(struct fc_lport *lport)
+{
+	free_percpu(lport->dev_stats);
+}
+
+/**
+ * lport_priv() - Return the private data from a local port
+ * @lport: The local port whose private data is to be retreived
+ */
+static inline void *lport_priv(const struct fc_lport *lport)
+{
+	return (void *)(lport + 1);
+}
+
+/**
+ * libfc_host_alloc() - Allocate a Scsi_Host with room for a local port and
+ *                      LLD private data
+ * @sht:       The SCSI host template
+ * @priv_size: Size of private data
+ *
+ * Returns: libfc lport
+ */
+static inline struct fc_lport *
+libfc_host_alloc(struct scsi_host_template *sht, int priv_size)
+{
+	struct fc_lport *lport;
+	struct Scsi_Host *shost;
+
+	shost = scsi_host_alloc(sht, sizeof(*lport) + priv_size);
+	if (!shost)
+		return NULL;
+	lport = shost_priv(shost);
+	lport->host = shost;
+	INIT_LIST_HEAD(&lport->ema_list);
+	INIT_LIST_HEAD(&lport->vports);
+	return lport;
+}
+
+/*
+ * FC_FCP HELPER FUNCTIONS
+ *****************************/
+static inline bool fc_fcp_is_read(const struct fc_fcp_pkt *fsp)
+{
+	if (fsp && fsp->cmd)
+		return fsp->cmd->sc_data_direction == DMA_FROM_DEVICE;
+	return false;
+}
+
+/*
+ * LOCAL PORT LAYER
+ *****************************/
+int fc_lport_init(struct fc_lport *);
+int fc_lport_destroy(struct fc_lport *);
+int fc_fabric_logoff(struct fc_lport *);
+int fc_fabric_login(struct fc_lport *);
+void __fc_linkup(struct fc_lport *);
+void fc_linkup(struct fc_lport *);
+void __fc_linkdown(struct fc_lport *);
+void fc_linkdown(struct fc_lport *);
+void fc_vport_setlink(struct fc_lport *);
+void fc_vports_linkchange(struct fc_lport *);
+int fc_lport_config(struct fc_lport *);
+int fc_lport_reset(struct fc_lport *);
+int fc_set_mfs(struct fc_lport *, u32 mfs);
+struct fc_lport *libfc_vport_create(struct fc_vport *, int privsize);
+struct fc_lport *fc_vport_id_lookup(struct fc_lport *, u32 port_id);
+int fc_lport_bsg_request(struct fc_bsg_job *);
+void fc_lport_set_local_id(struct fc_lport *, u32 port_id);
+void fc_lport_iterate(void (*func)(struct fc_lport *, void *), void *);
+
+/*
+ * REMOTE PORT LAYER
+ *****************************/
+int fc_rport_init(struct fc_lport *);
+void fc_rport_terminate_io(struct fc_rport *);
+
+/*
+ * DISCOVERY LAYER
+ *****************************/
+int fc_disc_init(struct fc_lport *);
+
+static inline struct fc_lport *fc_disc_lport(struct fc_disc *disc)
+{
+	return container_of(disc, struct fc_lport, disc);
+}
+
+/*
+ * FCP LAYER
+ *****************************/
+int fc_fcp_init(struct fc_lport *);
+void fc_fcp_destroy(struct fc_lport *);
+
+/*
+ * SCSI INTERACTION LAYER
+ *****************************/
+int fc_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
+int fc_eh_abort(struct scsi_cmnd *);
+int fc_eh_device_reset(struct scsi_cmnd *);
+int fc_eh_host_reset(struct scsi_cmnd *);
+int fc_slave_alloc(struct scsi_device *);
+int fc_change_queue_depth(struct scsi_device *, int qdepth, int reason);
+int fc_change_queue_type(struct scsi_device *, int tag_type);
+
+/*
+ * ELS/CT interface
+ *****************************/
+int fc_elsct_init(struct fc_lport *);
+struct fc_seq *fc_elsct_send(struct fc_lport *, u32 did,
+				    struct fc_frame *,
+				    unsigned int op,
+				    void (*resp)(struct fc_seq *,
+						 struct fc_frame *,
+						 void *arg),
+				    void *arg, u32 timer_msec);
+void fc_lport_flogi_resp(struct fc_seq *, struct fc_frame *, void *);
+void fc_lport_logo_resp(struct fc_seq *, struct fc_frame *, void *);
+void fc_fill_reply_hdr(struct fc_frame *, const struct fc_frame *,
+		       enum fc_rctl, u32 parm_offset);
+void fc_fill_hdr(struct fc_frame *, const struct fc_frame *,
+		 enum fc_rctl, u32 f_ctl, u16 seq_cnt, u32 parm_offset);
+
+
+/*
+ * EXCHANGE MANAGER LAYER
+ *****************************/
+int fc_exch_init(struct fc_lport *);
+struct fc_exch_mgr_anchor *fc_exch_mgr_add(struct fc_lport *,
+					   struct fc_exch_mgr *,
+					   bool (*match)(struct fc_frame *));
+void fc_exch_mgr_del(struct fc_exch_mgr_anchor *);
+int fc_exch_mgr_list_clone(struct fc_lport *src, struct fc_lport *dst);
+struct fc_exch_mgr *fc_exch_mgr_alloc(struct fc_lport *, enum fc_class class,
+				      u16 min_xid, u16 max_xid,
+				      bool (*match)(struct fc_frame *));
+void fc_exch_mgr_free(struct fc_lport *);
+void fc_exch_recv(struct fc_lport *, struct fc_frame *);
+void fc_exch_mgr_reset(struct fc_lport *, u32 s_id, u32 d_id);
+
+/*
+ * Functions for fc_functions_template
+ */
+void fc_get_host_speed(struct Scsi_Host *);
+void fc_get_host_port_state(struct Scsi_Host *);
+void fc_set_rport_loss_tmo(struct fc_rport *, u32 timeout);
+struct fc_host_statistics *fc_get_host_stats(struct Scsi_Host *);
+
+#endif /* _LIBFC_H_ */
diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h
new file mode 100644
index 00000000..cfdb55f0
--- /dev/null
+++ b/include/scsi/libfcoe.h
@@ -0,0 +1,350 @@
+/*
+ * Copyright (c) 2008-2009 Cisco Systems, Inc.  All rights reserved.
+ * Copyright (c) 2007-2008 Intel Corporation.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _LIBFCOE_H
+#define _LIBFCOE_H
+
+#include <linux/etherdevice.h>
+#include <linux/if_ether.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/workqueue.h>
+#include <linux/random.h>
+#include <scsi/fc/fc_fcoe.h>
+#include <scsi/libfc.h>
+
+#define FCOE_MAX_CMD_LEN	16	/* Supported CDB length */
+
+/*
+ * Max MTU for FCoE: 14 (FCoE header) + 24 (FC header) + 2112 (max FC payload)
+ * + 4 (FC CRC) + 4 (FCoE trailer) =  2158 bytes
+ */
+#define FCOE_MTU	2158
+
+/*
+ * FIP tunable parameters.
+ */
+#define FCOE_CTLR_START_DELAY	2000	/* mS after first adv. to choose FCF */
+#define FCOE_CTRL_SOL_TOV	2000	/* min. solicitation interval (mS) */
+#define FCOE_CTLR_FCF_LIMIT	20	/* max. number of FCF entries */
+#define FCOE_CTLR_VN2VN_LOGIN_LIMIT 3	/* max. VN2VN rport login retries */
+
+/**
+ * enum fip_state - internal state of FCoE controller.
+ * @FIP_ST_DISABLED: 	controller has been disabled or not yet enabled.
+ * @FIP_ST_LINK_WAIT:	the physical link is down or unusable.
+ * @FIP_ST_AUTO:	determining whether to use FIP or non-FIP mode.
+ * @FIP_ST_NON_FIP:	non-FIP mode selected.
+ * @FIP_ST_ENABLED:	FIP mode selected.
+ * @FIP_ST_VNMP_START:	VN2VN multipath mode start, wait
+ * @FIP_ST_VNMP_PROBE1:	VN2VN sent first probe, listening
+ * @FIP_ST_VNMP_PROBE2:	VN2VN sent second probe, listening
+ * @FIP_ST_VNMP_CLAIM:	VN2VN sent claim, waiting for responses
+ * @FIP_ST_VNMP_UP:	VN2VN multipath mode operation
+ */
+enum fip_state {
+	FIP_ST_DISABLED,
+	FIP_ST_LINK_WAIT,
+	FIP_ST_AUTO,
+	FIP_ST_NON_FIP,
+	FIP_ST_ENABLED,
+	FIP_ST_VNMP_START,
+	FIP_ST_VNMP_PROBE1,
+	FIP_ST_VNMP_PROBE2,
+	FIP_ST_VNMP_CLAIM,
+	FIP_ST_VNMP_UP,
+};
+
+/*
+ * Modes:
+ * The mode is the state that is to be entered after link up.
+ * It must not change after fcoe_ctlr_init() sets it.
+ */
+#define FIP_MODE_AUTO		FIP_ST_AUTO
+#define FIP_MODE_NON_FIP	FIP_ST_NON_FIP
+#define FIP_MODE_FABRIC		FIP_ST_ENABLED
+#define FIP_MODE_VN2VN		FIP_ST_VNMP_START
+
+/**
+ * struct fcoe_ctlr - FCoE Controller and FIP state
+ * @state:	   internal FIP state for network link and FIP or non-FIP mode.
+ * @mode:	   LLD-selected mode.
+ * @lp:		   &fc_lport: libfc local port.
+ * @sel_fcf:	   currently selected FCF, or NULL.
+ * @fcfs:	   list of discovered FCFs.
+ * @fcf_count:	   number of discovered FCF entries.
+ * @sol_time:	   time when a multicast solicitation was last sent.
+ * @sel_time:	   time after which to select an FCF.
+ * @port_ka_time:  time of next port keep-alive.
+ * @ctlr_ka_time:  time of next controller keep-alive.
+ * @timer:	   timer struct used for all delayed events.
+ * @timer_work:	   &work_struct for doing keep-alives and resets.
+ * @recv_work:	   &work_struct for receiving FIP frames.
+ * @fip_recv_list: list of received FIP frames.
+ * @flogi_req:	   clone of FLOGI request sent
+ * @rnd_state:	   state for pseudo-random number generator.
+ * @port_id:	   proposed or selected local-port ID.
+ * @user_mfs:	   configured maximum FC frame size, including FC header.
+ * @flogi_oxid:    exchange ID of most recent fabric login.
+ * @flogi_req_send: send of FLOGI requested
+ * @flogi_count:   number of FLOGI attempts in AUTO mode.
+ * @map_dest:	   use the FC_MAP mode for destination MAC addresses.
+ * @spma:	   supports SPMA server-provided MACs mode
+ * @probe_tries:   number of FC_IDs probed
+ * @dest_addr:	   MAC address of the selected FC forwarder.
+ * @ctl_src_addr:  the native MAC address of our local port.
+ * @send:	   LLD-supplied function to handle sending FIP Ethernet frames
+ * @update_mac:    LLD-supplied function to handle changes to MAC addresses.
+ * @get_src_addr:  LLD-supplied function to supply a source MAC address.
+ * @ctlr_mutex:	   lock protecting this structure.
+ * @ctlr_lock:     spinlock covering flogi_req
+ *
+ * This structure is used by all FCoE drivers.  It contains information
+ * needed by all FCoE low-level drivers (LLDs) as well as internal state
+ * for FIP, and fields shared with the LLDS.
+ */
+struct fcoe_ctlr {
+	enum fip_state state;
+	enum fip_state mode;
+	struct fc_lport *lp;
+	struct fcoe_fcf *sel_fcf;
+	struct list_head fcfs;
+	u16 fcf_count;
+	unsigned long sol_time;
+	unsigned long sel_time;
+	unsigned long port_ka_time;
+	unsigned long ctlr_ka_time;
+	struct timer_list timer;
+	struct work_struct timer_work;
+	struct work_struct recv_work;
+	struct sk_buff_head fip_recv_list;
+	struct sk_buff *flogi_req;
+
+	struct rnd_state rnd_state;
+	u32 port_id;
+
+	u16 user_mfs;
+	u16 flogi_oxid;
+	u8 flogi_req_send;
+	u8 flogi_count;
+	u8 map_dest;
+	u8 spma;
+	u8 probe_tries;
+	u8 priority;
+	u8 dest_addr[ETH_ALEN];
+	u8 ctl_src_addr[ETH_ALEN];
+
+	void (*send)(struct fcoe_ctlr *, struct sk_buff *);
+	void (*update_mac)(struct fc_lport *, u8 *addr);
+	u8 * (*get_src_addr)(struct fc_lport *);
+	struct mutex ctlr_mutex;
+	spinlock_t ctlr_lock;
+};
+
+/**
+ * struct fcoe_fcf - Fibre-Channel Forwarder
+ * @list:	 list linkage
+ * @time:	 system time (jiffies) when an advertisement was last received
+ * @switch_name: WWN of switch from advertisement
+ * @fabric_name: WWN of fabric from advertisement
+ * @fc_map:	 FC_MAP value from advertisement
+ * @fcf_mac:	 Ethernet address of the FCF for FIP traffic
+ * @fcoe_mac:	 Ethernet address of the FCF for FCoE traffic
+ * @vfid:	 virtual fabric ID
+ * @pri:	 selection priority, smaller values are better
+ * @flogi_sent:	 current FLOGI sent to this FCF
+ * @flags:	 flags received from advertisement
+ * @fka_period:	 keep-alive period, in jiffies
+ *
+ * A Fibre-Channel Forwarder (FCF) is the entity on the Ethernet that
+ * passes FCoE frames on to an FC fabric.  This structure represents
+ * one FCF from which advertisements have been received.
+ *
+ * When looking up an FCF, @switch_name, @fabric_name, @fc_map, @vfid, and
+ * @fcf_mac together form the lookup key.
+ */
+struct fcoe_fcf {
+	struct list_head list;
+	unsigned long time;
+
+	u64 switch_name;
+	u64 fabric_name;
+	u32 fc_map;
+	u16 vfid;
+	u8 fcf_mac[ETH_ALEN];
+	u8 fcoe_mac[ETH_ALEN];
+
+	u8 pri;
+	u8 flogi_sent;
+	u16 flags;
+	u32 fka_period;
+	u8 fd_flags:1;
+};
+
+/**
+ * struct fcoe_rport - VN2VN remote port
+ * @time:	time of create or last beacon packet received from node
+ * @fcoe_len:	max FCoE frame size, not including VLAN or Ethernet headers
+ * @flags:	flags from probe or claim
+ * @login_count: number of unsuccessful rport logins to this port
+ * @enode_mac:	E_Node control MAC address
+ * @vn_mac:	VN_Node assigned MAC address for data
+ */
+struct fcoe_rport {
+	unsigned long time;
+	u16 fcoe_len;
+	u16 flags;
+	u8 login_count;
+	u8 enode_mac[ETH_ALEN];
+	u8 vn_mac[ETH_ALEN];
+};
+
+/* FIP API functions */
+void fcoe_ctlr_init(struct fcoe_ctlr *, enum fip_state);
+void fcoe_ctlr_destroy(struct fcoe_ctlr *);
+void fcoe_ctlr_link_up(struct fcoe_ctlr *);
+int fcoe_ctlr_link_down(struct fcoe_ctlr *);
+int fcoe_ctlr_els_send(struct fcoe_ctlr *, struct fc_lport *, struct sk_buff *);
+void fcoe_ctlr_recv(struct fcoe_ctlr *, struct sk_buff *);
+int fcoe_ctlr_recv_flogi(struct fcoe_ctlr *, struct fc_lport *,
+			 struct fc_frame *);
+
+/* libfcoe funcs */
+u64 fcoe_wwn_from_mac(unsigned char mac[], unsigned int, unsigned int);
+int fcoe_libfc_config(struct fc_lport *, struct fcoe_ctlr *,
+		      const struct libfc_function_template *, int init_fcp);
+u32 fcoe_fc_crc(struct fc_frame *fp);
+int fcoe_start_io(struct sk_buff *skb);
+int fcoe_get_wwn(struct net_device *netdev, u64 *wwn, int type);
+void __fcoe_get_lesb(struct fc_lport *lport, struct fc_els_lesb *fc_lesb,
+		     struct net_device *netdev);
+void fcoe_wwn_to_str(u64 wwn, char *buf, int len);
+int fcoe_validate_vport_create(struct fc_vport *vport);
+
+/**
+ * is_fip_mode() - returns true if FIP mode selected.
+ * @fip:	FCoE controller.
+ */
+static inline bool is_fip_mode(struct fcoe_ctlr *fip)
+{
+	return fip->state == FIP_ST_ENABLED;
+}
+
+/* helper for FCoE SW HBA drivers, can include subven and subdev if needed. The
+ * modpost would use pci_device_id table to auto-generate formatted module alias
+ * into the corresponding .mod.c file, but there may or may not be a pci device
+ * id table for FCoE drivers so we use the following helper for build the fcoe
+ * driver module alias.
+ */
+#define MODULE_ALIAS_FCOE_PCI(ven, dev) \
+	MODULE_ALIAS("fcoe-pci:"	\
+		"v" __stringify(ven)	\
+		"d" __stringify(dev) "sv*sd*bc*sc*i*")
+
+/* the name of the default FCoE transport driver fcoe.ko */
+#define FCOE_TRANSPORT_DEFAULT	"fcoe"
+
+/* struct fcoe_transport - The FCoE transport interface
+ * @name:	a vendor specific name for their FCoE transport driver
+ * @attached:	whether this transport is already attached
+ * @list:	list linkage to all attached transports
+ * @match:	handler to allow the transport driver to match up a given netdev
+ * @create:	handler to sysfs entry of create for FCoE instances
+ * @destroy:	handler to sysfs entry of destroy for FCoE instances
+ * @enable:	handler to sysfs entry of enable for FCoE instances
+ * @disable:	handler to sysfs entry of disable for FCoE instances
+ */
+struct fcoe_transport {
+	char name[IFNAMSIZ];
+	bool attached;
+	struct list_head list;
+	bool (*match) (struct net_device *device);
+	int (*create) (struct net_device *device, enum fip_state fip_mode);
+	int (*destroy) (struct net_device *device);
+	int (*enable) (struct net_device *device);
+	int (*disable) (struct net_device *device);
+};
+
+/**
+ * struct fcoe_percpu_s - The context for FCoE receive thread(s)
+ * @thread:	    The thread context
+ * @fcoe_rx_list:   The queue of pending packets to process
+ * @page:	    The memory page for calculating frame trailer CRCs
+ * @crc_eof_offset: The offset into the CRC page pointing to available
+ *		    memory for a new trailer
+ */
+struct fcoe_percpu_s {
+	struct task_struct *thread;
+	struct sk_buff_head fcoe_rx_list;
+	struct page *crc_eof_page;
+	int crc_eof_offset;
+};
+
+/**
+ * struct fcoe_port - The FCoE private structure
+ * @priv:		       The associated fcoe interface. The structure is
+ *			       defined by the low level driver
+ * @lport:		       The associated local port
+ * @fcoe_pending_queue:	       The pending Rx queue of skbs
+ * @fcoe_pending_queue_active: Indicates if the pending queue is active
+ * @priority:		       Packet priority (DCB)
+ * @max_queue_depth:	       Max queue depth of pending queue
+ * @min_queue_depth:	       Min queue depth of pending queue
+ * @timer:		       The queue timer
+ * @destroy_work:	       Handle for work context
+ *			       (to prevent RTNL deadlocks)
+ * @data_srt_addr:	       Source address for data
+ *
+ * An instance of this structure is to be allocated along with the
+ * Scsi_Host and libfc fc_lport structures.
+ */
+struct fcoe_port {
+	void		      *priv;
+	struct fc_lport	      *lport;
+	struct sk_buff_head   fcoe_pending_queue;
+	u8		      fcoe_pending_queue_active;
+	u8		      priority;
+	u32		      max_queue_depth;
+	u32		      min_queue_depth;
+	struct timer_list     timer;
+	struct work_struct    destroy_work;
+	u8		      data_src_addr[ETH_ALEN];
+};
+void fcoe_clean_pending_queue(struct fc_lport *);
+void fcoe_check_wait_queue(struct fc_lport *lport, struct sk_buff *skb);
+void fcoe_queue_timer(ulong lport);
+int fcoe_get_paged_crc_eof(struct sk_buff *skb, int tlen,
+			   struct fcoe_percpu_s *fps);
+
+/**
+ * struct netdev_list
+ * A mapping from netdevice to fcoe_transport
+ */
+struct fcoe_netdev_mapping {
+	struct list_head list;
+	struct net_device *netdev;
+	struct fcoe_transport *ft;
+};
+
+/* fcoe transports registration and deregistration */
+int fcoe_transport_attach(struct fcoe_transport *ft);
+int fcoe_transport_detach(struct fcoe_transport *ft);
+
+#endif /* _LIBFCOE_H */
diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h
new file mode 100644
index 00000000..6e33386a
--- /dev/null
+++ b/include/scsi/libiscsi.h
@@ -0,0 +1,449 @@
+/*
+ * iSCSI lib definitions
+ *
+ * Copyright (C) 2006 Red Hat, Inc.  All rights reserved.
+ * Copyright (C) 2004 - 2006 Mike Christie
+ * Copyright (C) 2004 - 2005 Dmitry Yusupov
+ * Copyright (C) 2004 - 2005 Alex Aizman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#ifndef LIBISCSI_H
+#define LIBISCSI_H
+
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/mutex.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <linux/kfifo.h>
+#include <scsi/iscsi_proto.h>
+#include <scsi/iscsi_if.h>
+#include <scsi/scsi_transport_iscsi.h>
+
+struct scsi_transport_template;
+struct scsi_host_template;
+struct scsi_device;
+struct Scsi_Host;
+struct scsi_target;
+struct scsi_cmnd;
+struct socket;
+struct iscsi_transport;
+struct iscsi_cls_session;
+struct iscsi_cls_conn;
+struct iscsi_session;
+struct iscsi_nopin;
+struct device;
+
+#define ISCSI_DEF_XMIT_CMDS_MAX	128	/* must be power of 2 */
+#define ISCSI_MGMT_CMDS_MAX	15
+
+#define ISCSI_DEF_CMD_PER_LUN	32
+
+/* Task Mgmt states */
+enum {
+	TMF_INITIAL,
+	TMF_QUEUED,
+	TMF_SUCCESS,
+	TMF_FAILED,
+	TMF_TIMEDOUT,
+	TMF_NOT_FOUND,
+};
+
+/* Connection suspend "bit" */
+#define ISCSI_SUSPEND_BIT		1
+
+#define ISCSI_ITT_MASK			0x1fff
+#define ISCSI_TOTAL_CMDS_MAX		4096
+/* this must be a power of two greater than ISCSI_MGMT_CMDS_MAX */
+#define ISCSI_TOTAL_CMDS_MIN		16
+#define ISCSI_AGE_SHIFT			28
+#define ISCSI_AGE_MASK			0xf
+
+#define ISCSI_ADDRESS_BUF_LEN		64
+
+enum {
+	/* this is the maximum possible storage for AHSs */
+	ISCSI_MAX_AHS_SIZE = sizeof(struct iscsi_ecdb_ahdr) +
+				sizeof(struct iscsi_rlength_ahdr),
+	ISCSI_DIGEST_SIZE = sizeof(__u32),
+};
+
+
+enum {
+	ISCSI_TASK_FREE,
+	ISCSI_TASK_COMPLETED,
+	ISCSI_TASK_PENDING,
+	ISCSI_TASK_RUNNING,
+	ISCSI_TASK_ABRT_TMF,		/* aborted due to TMF */
+	ISCSI_TASK_ABRT_SESS_RECOV,	/* aborted due to session recovery */
+	ISCSI_TASK_REQUEUE_SCSIQ,	/* qcmd requeueing to scsi-ml */
+};
+
+struct iscsi_r2t_info {
+	__be32			ttt;		/* copied from R2T */
+	__be32			exp_statsn;	/* copied from R2T */
+	uint32_t		data_length;	/* copied from R2T */
+	uint32_t		data_offset;	/* copied from R2T */
+	int			data_count;	/* DATA-Out payload progress */
+	int			datasn;
+	/* LLDs should set/update these values */
+	int			sent;		/* R2T sequence progress */
+};
+
+struct iscsi_task {
+	/*
+	 * Because LLDs allocate their hdr differently, this is a pointer
+	 * and length to that storage. It must be setup at session
+	 * creation time.
+	 */
+	struct iscsi_hdr	*hdr;
+	unsigned short		hdr_max;
+	unsigned short		hdr_len;	/* accumulated size of hdr used */
+	/* copied values in case we need to send tmfs */
+	itt_t			hdr_itt;
+	__be32			cmdsn;
+	struct scsi_lun		lun;
+
+	int			itt;		/* this ITT */
+
+	unsigned		imm_count;	/* imm-data (bytes)   */
+	/* offset in unsolicited stream (bytes); */
+	struct iscsi_r2t_info	unsol_r2t;
+	char			*data;		/* mgmt payload */
+	unsigned		data_count;
+	struct scsi_cmnd	*sc;		/* associated SCSI cmd*/
+	struct iscsi_conn	*conn;		/* used connection    */
+
+	/* data processing tracking */
+	unsigned long		last_xfer;
+	unsigned long		last_timeout;
+	bool			have_checked_conn;
+	/* state set/tested under session->lock */
+	int			state;
+	atomic_t		refcount;
+	struct list_head	running;	/* running cmd list */
+	void			*dd_data;	/* driver/transport data */
+};
+
+static inline int iscsi_task_has_unsol_data(struct iscsi_task *task)
+{
+	return task->unsol_r2t.data_length > task->unsol_r2t.sent;
+}
+
+static inline void* iscsi_next_hdr(struct iscsi_task *task)
+{
+	return (void*)task->hdr + task->hdr_len;
+}
+
+/* Connection's states */
+enum {
+	ISCSI_CONN_INITIAL_STAGE,
+	ISCSI_CONN_STARTED,
+	ISCSI_CONN_STOPPED,
+	ISCSI_CONN_CLEANUP_WAIT,
+};
+
+struct iscsi_conn {
+	struct iscsi_cls_conn	*cls_conn;	/* ptr to class connection */
+	void			*dd_data;	/* iscsi_transport data */
+	struct iscsi_session	*session;	/* parent session */
+	/*
+	 * conn_stop() flag: stop to recover, stop to terminate
+	 */
+        int			stop_stage;
+	struct timer_list	transport_timer;
+	unsigned long		last_recv;
+	unsigned long		last_ping;
+	int			ping_timeout;
+	int			recv_timeout;
+	struct iscsi_task 	*ping_task;
+
+	/* iSCSI connection-wide sequencing */
+	uint32_t		exp_statsn;
+
+	/* control data */
+	int			id;		/* CID */
+	int			c_stage;	/* connection state */
+	/*
+	 * Preallocated buffer for pdus that have data but do not
+	 * originate from scsi-ml. We never have two pdus using the
+	 * buffer at the same time. It is only allocated to
+	 * the default max recv size because the pdus we support
+	 * should always fit in this buffer
+	 */
+	char			*data;
+	struct iscsi_task 	*login_task;	/* mtask used for login/text */
+	struct iscsi_task	*task;		/* xmit task in progress */
+
+	/* xmit */
+	struct list_head	mgmtqueue;	/* mgmt (control) xmit queue */
+	struct list_head	cmdqueue;	/* data-path cmd queue */
+	struct list_head	requeue;	/* tasks needing another run */
+	struct work_struct	xmitwork;	/* per-conn. xmit workqueue */
+	unsigned long		suspend_tx;	/* suspend Tx */
+	unsigned long		suspend_rx;	/* suspend Rx */
+
+	/* abort */
+	wait_queue_head_t	ehwait;		/* used in eh_abort() */
+	struct iscsi_tm		tmhdr;
+	struct timer_list	tmf_timer;
+	int			tmf_state;	/* see TMF_INITIAL, etc.*/
+
+	/* negotiated params */
+	unsigned		max_recv_dlength; /* initiator_max_recv_dsl*/
+	unsigned		max_xmit_dlength; /* target_max_recv_dsl */
+	int			hdrdgst_en;
+	int			datadgst_en;
+	int			ifmarker_en;
+	int			ofmarker_en;
+	/* values userspace uses to id a conn */
+	int			persistent_port;
+	char			*persistent_address;
+
+	/* MIB-statistics */
+	uint64_t		txdata_octets;
+	uint64_t		rxdata_octets;
+	uint32_t		scsicmd_pdus_cnt;
+	uint32_t		dataout_pdus_cnt;
+	uint32_t		scsirsp_pdus_cnt;
+	uint32_t		datain_pdus_cnt;
+	uint32_t		r2t_pdus_cnt;
+	uint32_t		tmfcmd_pdus_cnt;
+	int32_t			tmfrsp_pdus_cnt;
+
+	/* custom statistics */
+	uint32_t		eh_abort_cnt;
+	uint32_t		fmr_unalign_cnt;
+};
+
+struct iscsi_pool {
+	struct kfifo		queue;		/* FIFO Queue */
+	void			**pool;		/* Pool of elements */
+	int			max;		/* Max number of elements */
+};
+
+/* Session's states */
+enum {
+	ISCSI_STATE_FREE = 1,
+	ISCSI_STATE_LOGGED_IN,
+	ISCSI_STATE_FAILED,
+	ISCSI_STATE_TERMINATE,
+	ISCSI_STATE_IN_RECOVERY,
+	ISCSI_STATE_RECOVERY_FAILED,
+	ISCSI_STATE_LOGGING_OUT,
+};
+
+struct iscsi_session {
+	struct iscsi_cls_session *cls_session;
+	/*
+	 * Syncs up the scsi eh thread with the iscsi eh thread when sending
+	 * task management functions. This must be taken before the session
+	 * and recv lock.
+	 */
+	struct mutex		eh_mutex;
+
+	/* iSCSI session-wide sequencing */
+	uint32_t		cmdsn;
+	uint32_t		exp_cmdsn;
+	uint32_t		max_cmdsn;
+
+	/* This tracks the reqs queued into the initiator */
+	uint32_t		queued_cmdsn;
+
+	/* configuration */
+	int			abort_timeout;
+	int			lu_reset_timeout;
+	int			tgt_reset_timeout;
+	int			initial_r2t_en;
+	unsigned short		max_r2t;
+	int			imm_data_en;
+	unsigned		first_burst;
+	unsigned		max_burst;
+	int			time2wait;
+	int			time2retain;
+	int			pdu_inorder_en;
+	int			dataseq_inorder_en;
+	int			erl;
+	int			fast_abort;
+	int			tpgt;
+	char			*username;
+	char			*username_in;
+	char			*password;
+	char			*password_in;
+	char			*targetname;
+	char			*targetalias;
+	char			*ifacename;
+	char			*initiatorname;
+	/* control data */
+	struct iscsi_transport	*tt;
+	struct Scsi_Host	*host;
+	struct iscsi_conn	*leadconn;	/* leading connection */
+	spinlock_t		lock;		/* protects session state, *
+						 * sequence numbers,       *
+						 * session resources:      *
+						 * - cmdpool,		   *
+						 * - mgmtpool,		   *
+						 * - r2tpool		   */
+	int			state;		/* session state           */
+	int			age;		/* counts session re-opens */
+
+	int			scsi_cmds_max; 	/* max scsi commands */
+	int			cmds_max;	/* size of cmds array */
+	struct iscsi_task	**cmds;		/* Original Cmds arr */
+	struct iscsi_pool	cmdpool;	/* PDU's pool */
+	void			*dd_data;	/* LLD private data */
+};
+
+enum {
+	ISCSI_HOST_SETUP,
+	ISCSI_HOST_REMOVED,
+};
+
+struct iscsi_host {
+	char			*initiatorname;
+	/* hw address or netdev iscsi connection is bound to */
+	char			*hwaddress;
+	char			*netdev;
+
+	wait_queue_head_t	session_removal_wq;
+	/* protects sessions and state */
+	spinlock_t		lock;
+	int			num_sessions;
+	int			state;
+
+	struct workqueue_struct	*workq;
+	char			workq_name[20];
+};
+
+/*
+ * scsi host template
+ */
+extern int iscsi_change_queue_depth(struct scsi_device *sdev, int depth,
+				    int reason);
+extern int iscsi_eh_abort(struct scsi_cmnd *sc);
+extern int iscsi_eh_recover_target(struct scsi_cmnd *sc);
+extern int iscsi_eh_session_reset(struct scsi_cmnd *sc);
+extern int iscsi_eh_device_reset(struct scsi_cmnd *sc);
+extern int iscsi_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *sc);
+
+/*
+ * iSCSI host helpers.
+ */
+#define iscsi_host_priv(_shost) \
+	(shost_priv(_shost) + sizeof(struct iscsi_host))
+
+extern int iscsi_host_set_param(struct Scsi_Host *shost,
+				enum iscsi_host_param param, char *buf,
+				int buflen);
+extern int iscsi_host_get_param(struct Scsi_Host *shost,
+				enum iscsi_host_param param, char *buf);
+extern int iscsi_host_add(struct Scsi_Host *shost, struct device *pdev);
+extern struct Scsi_Host *iscsi_host_alloc(struct scsi_host_template *sht,
+					  int dd_data_size,
+					  bool xmit_can_sleep);
+extern void iscsi_host_remove(struct Scsi_Host *shost);
+extern void iscsi_host_free(struct Scsi_Host *shost);
+extern int iscsi_target_alloc(struct scsi_target *starget);
+
+/*
+ * session management
+ */
+extern struct iscsi_cls_session *
+iscsi_session_setup(struct iscsi_transport *, struct Scsi_Host *shost,
+		    uint16_t, int, int, uint32_t, unsigned int);
+extern void iscsi_session_teardown(struct iscsi_cls_session *);
+extern void iscsi_session_recovery_timedout(struct iscsi_cls_session *);
+extern int iscsi_set_param(struct iscsi_cls_conn *cls_conn,
+			   enum iscsi_param param, char *buf, int buflen);
+extern int iscsi_session_get_param(struct iscsi_cls_session *cls_session,
+				   enum iscsi_param param, char *buf);
+
+#define iscsi_session_printk(prefix, _sess, fmt, a...)	\
+	iscsi_cls_session_printk(prefix, _sess->cls_session, fmt, ##a)
+
+/*
+ * connection management
+ */
+extern struct iscsi_cls_conn *iscsi_conn_setup(struct iscsi_cls_session *,
+					       int, uint32_t);
+extern void iscsi_conn_teardown(struct iscsi_cls_conn *);
+extern int iscsi_conn_start(struct iscsi_cls_conn *);
+extern void iscsi_conn_stop(struct iscsi_cls_conn *, int);
+extern int iscsi_conn_bind(struct iscsi_cls_session *, struct iscsi_cls_conn *,
+			   int);
+extern void iscsi_conn_failure(struct iscsi_conn *conn, enum iscsi_err err);
+extern void iscsi_session_failure(struct iscsi_session *session,
+				  enum iscsi_err err);
+extern int iscsi_conn_get_param(struct iscsi_cls_conn *cls_conn,
+				enum iscsi_param param, char *buf);
+extern int iscsi_conn_get_addr_param(struct sockaddr_storage *addr,
+				     enum iscsi_param param, char *buf);
+extern void iscsi_suspend_tx(struct iscsi_conn *conn);
+extern void iscsi_suspend_queue(struct iscsi_conn *conn);
+extern void iscsi_conn_queue_work(struct iscsi_conn *conn);
+
+#define iscsi_conn_printk(prefix, _c, fmt, a...) \
+	iscsi_cls_conn_printk(prefix, ((struct iscsi_conn *)_c)->cls_conn, \
+			      fmt, ##a)
+
+/*
+ * pdu and task processing
+ */
+extern void iscsi_update_cmdsn(struct iscsi_session *, struct iscsi_nopin *);
+extern void iscsi_prep_data_out_pdu(struct iscsi_task *task,
+				    struct iscsi_r2t_info *r2t,
+				    struct iscsi_data *hdr);
+extern int iscsi_conn_send_pdu(struct iscsi_cls_conn *, struct iscsi_hdr *,
+				char *, uint32_t);
+extern int iscsi_complete_pdu(struct iscsi_conn *, struct iscsi_hdr *,
+			      char *, int);
+extern int __iscsi_complete_pdu(struct iscsi_conn *, struct iscsi_hdr *,
+				char *, int);
+extern int iscsi_verify_itt(struct iscsi_conn *, itt_t);
+extern struct iscsi_task *iscsi_itt_to_ctask(struct iscsi_conn *, itt_t);
+extern struct iscsi_task *iscsi_itt_to_task(struct iscsi_conn *, itt_t);
+extern void iscsi_requeue_task(struct iscsi_task *task);
+extern void iscsi_put_task(struct iscsi_task *task);
+extern void __iscsi_put_task(struct iscsi_task *task);
+extern void __iscsi_get_task(struct iscsi_task *task);
+extern void iscsi_complete_scsi_task(struct iscsi_task *task,
+				     uint32_t exp_cmdsn, uint32_t max_cmdsn);
+
+/*
+ * generic helpers
+ */
+extern void iscsi_pool_free(struct iscsi_pool *);
+extern int iscsi_pool_init(struct iscsi_pool *, int, void ***, int);
+
+/*
+ * inline functions to deal with padding.
+ */
+static inline unsigned int
+iscsi_padded(unsigned int len)
+{
+	return (len + ISCSI_PAD_LEN - 1) & ~(ISCSI_PAD_LEN - 1);
+}
+
+static inline unsigned int
+iscsi_padding(unsigned int len)
+{
+	len &= (ISCSI_PAD_LEN - 1);
+	if (len)
+		len = ISCSI_PAD_LEN - len;
+	return len;
+}
+
+#endif
diff --git a/include/scsi/libiscsi_tcp.h b/include/scsi/libiscsi_tcp.h
new file mode 100644
index 00000000..215469a9
--- /dev/null
+++ b/include/scsi/libiscsi_tcp.h
@@ -0,0 +1,134 @@
+/*
+ * iSCSI over TCP/IP Data-Path lib
+ *
+ * Copyright (C) 2008 Mike Christie
+ * Copyright (C) 2008 Red Hat, Inc.  All rights reserved.
+ * maintained by open-iscsi@googlegroups.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * See the file COPYING included with this distribution for more details.
+ */
+
+#ifndef LIBISCSI_TCP_H
+#define LIBISCSI_TCP_H
+
+#include <scsi/libiscsi.h>
+
+struct iscsi_tcp_conn;
+struct iscsi_segment;
+struct sk_buff;
+struct hash_desc;
+
+typedef int iscsi_segment_done_fn_t(struct iscsi_tcp_conn *,
+				    struct iscsi_segment *);
+
+struct iscsi_segment {
+	unsigned char		*data;
+	unsigned int		size;
+	unsigned int		copied;
+	unsigned int		total_size;
+	unsigned int		total_copied;
+
+	struct hash_desc	*hash;
+	unsigned char		padbuf[ISCSI_PAD_LEN];
+	unsigned char		recv_digest[ISCSI_DIGEST_SIZE];
+	unsigned char		digest[ISCSI_DIGEST_SIZE];
+	unsigned int		digest_len;
+
+	struct scatterlist	*sg;
+	void			*sg_mapped;
+	unsigned int		sg_offset;
+	bool			atomic_mapped;
+
+	iscsi_segment_done_fn_t	*done;
+};
+
+/* Socket connection receive helper */
+struct iscsi_tcp_recv {
+	struct iscsi_hdr	*hdr;
+	struct iscsi_segment	segment;
+
+	/* Allocate buffer for BHS + AHS */
+	uint32_t		hdr_buf[64];
+
+	/* copied and flipped values */
+	int			datalen;
+};
+
+struct iscsi_tcp_conn {
+	struct iscsi_conn	*iscsi_conn;
+	void			*dd_data;
+	int			stop_stage;	/* conn_stop() flag: *
+						 * stop to recover,  *
+						 * stop to terminate */
+	/* control data */
+	struct iscsi_tcp_recv	in;		/* TCP receive context */
+	/* CRC32C (Rx) LLD should set this is they do not offload */
+	struct hash_desc	*rx_hash;
+};
+
+struct iscsi_tcp_task {
+	uint32_t		exp_datasn;	/* expected target's R2TSN/DataSN */
+	int			data_offset;
+	struct iscsi_r2t_info	*r2t;		/* in progress solict R2T */
+	struct iscsi_pool	r2tpool;
+	struct kfifo		r2tqueue;
+	void			*dd_data;
+};
+
+enum {
+	ISCSI_TCP_SEGMENT_DONE,		/* curr seg has been processed */
+	ISCSI_TCP_SKB_DONE,		/* skb is out of data */
+	ISCSI_TCP_CONN_ERR,		/* iscsi layer has fired a conn err */
+	ISCSI_TCP_SUSPENDED,		/* conn is suspended */
+};
+
+extern void iscsi_tcp_hdr_recv_prep(struct iscsi_tcp_conn *tcp_conn);
+extern int iscsi_tcp_recv_skb(struct iscsi_conn *conn, struct sk_buff *skb,
+			      unsigned int offset, bool offloaded, int *status);
+extern void iscsi_tcp_cleanup_task(struct iscsi_task *task);
+extern int iscsi_tcp_task_init(struct iscsi_task *task);
+extern int iscsi_tcp_task_xmit(struct iscsi_task *task);
+
+/* segment helpers */
+extern int iscsi_tcp_recv_segment_is_hdr(struct iscsi_tcp_conn *tcp_conn);
+extern int iscsi_tcp_segment_done(struct iscsi_tcp_conn *tcp_conn,
+				  struct iscsi_segment *segment, int recv,
+				  unsigned copied);
+extern void iscsi_tcp_segment_unmap(struct iscsi_segment *segment);
+
+extern void iscsi_segment_init_linear(struct iscsi_segment *segment,
+				      void *data, size_t size,
+				      iscsi_segment_done_fn_t *done,
+				      struct hash_desc *hash);
+extern int
+iscsi_segment_seek_sg(struct iscsi_segment *segment,
+		      struct scatterlist *sg_list, unsigned int sg_count,
+		      unsigned int offset, size_t size,
+		      iscsi_segment_done_fn_t *done, struct hash_desc *hash);
+
+/* digest helpers */
+extern void iscsi_tcp_dgst_header(struct hash_desc *hash, const void *hdr,
+				  size_t hdrlen,
+				  unsigned char digest[ISCSI_DIGEST_SIZE]);
+extern struct iscsi_cls_conn *
+iscsi_tcp_conn_setup(struct iscsi_cls_session *cls_session, int dd_data_size,
+		     uint32_t conn_idx);
+extern void iscsi_tcp_conn_teardown(struct iscsi_cls_conn *cls_conn);
+
+/* misc helpers */
+extern int iscsi_tcp_r2tpool_alloc(struct iscsi_session *session);
+extern void iscsi_tcp_r2tpool_free(struct iscsi_session *session);
+extern int iscsi_tcp_set_max_r2t(struct iscsi_conn *conn, char *buf);
+extern void iscsi_tcp_conn_get_stats(struct iscsi_cls_conn *cls_conn,
+				     struct iscsi_stats *stats);
+#endif /* LIBISCSI_TCP_H */
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
new file mode 100644
index 00000000..10ce74f5
--- /dev/null
+++ b/include/scsi/libsas.h
@@ -0,0 +1,728 @@
+/*
+ * SAS host prototypes and structures header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#ifndef _LIBSAS_H_
+#define _LIBSAS_H_
+
+
+#include <linux/timer.h>
+#include <linux/pci.h>
+#include <scsi/sas.h>
+#include <linux/libata.h>
+#include <linux/list.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_transport_sas.h>
+#include <linux/scatterlist.h>
+#include <linux/slab.h>
+
+struct block_device;
+
+enum sas_class {
+	SAS,
+	EXPANDER
+};
+
+enum sas_phy_role {
+	PHY_ROLE_NONE = 0,
+	PHY_ROLE_TARGET = 0x40,
+	PHY_ROLE_INITIATOR = 0x80,
+};
+
+enum sas_phy_type {
+        PHY_TYPE_PHYSICAL,
+        PHY_TYPE_VIRTUAL
+};
+
+/* The events are mnemonically described in sas_dump.c
+ * so when updating/adding events here, please also
+ * update the other file too.
+ */
+enum ha_event {
+	HAE_RESET             = 0U,
+	HA_NUM_EVENTS         = 1,
+};
+
+enum port_event {
+	PORTE_BYTES_DMAED     = 0U,
+	PORTE_BROADCAST_RCVD  = 1,
+	PORTE_LINK_RESET_ERR  = 2,
+	PORTE_TIMER_EVENT     = 3,
+	PORTE_HARD_RESET      = 4,
+	PORT_NUM_EVENTS       = 5,
+};
+
+enum phy_event {
+	PHYE_LOSS_OF_SIGNAL   = 0U,
+	PHYE_OOB_DONE         = 1,
+	PHYE_OOB_ERROR        = 2,
+	PHYE_SPINUP_HOLD      = 3, /* hot plug SATA, no COMWAKE sent */
+	PHY_NUM_EVENTS        = 4,
+};
+
+enum discover_event {
+	DISCE_DISCOVER_DOMAIN   = 0U,
+	DISCE_REVALIDATE_DOMAIN = 1,
+	DISCE_PORT_GONE         = 2,
+	DISCE_PROBE		= 3,
+	DISCE_DESTRUCT		= 4,
+	DISC_NUM_EVENTS		= 5,
+};
+
+/* ---------- Expander Devices ---------- */
+
+#define to_dom_device(_obj) container_of(_obj, struct domain_device, dev_obj)
+#define to_dev_attr(_attr)  container_of(_attr, struct domain_dev_attribute,\
+                                         attr)
+
+enum routing_attribute {
+	DIRECT_ROUTING,
+	SUBTRACTIVE_ROUTING,
+	TABLE_ROUTING,
+};
+
+enum ex_phy_state {
+	PHY_EMPTY,
+	PHY_VACANT,
+	PHY_NOT_PRESENT,
+	PHY_DEVICE_DISCOVERED
+};
+
+struct ex_phy {
+	int    phy_id;
+
+	enum ex_phy_state phy_state;
+
+	enum sas_dev_type attached_dev_type;
+	enum sas_linkrate linkrate;
+
+	u8   attached_sata_host:1;
+	u8   attached_sata_dev:1;
+	u8   attached_sata_ps:1;
+
+	enum sas_protocol attached_tproto;
+	enum sas_protocol attached_iproto;
+
+	u8   attached_sas_addr[SAS_ADDR_SIZE];
+	u8   attached_phy_id;
+
+	u8   phy_change_count;
+	enum routing_attribute routing_attr;
+	u8   virtual:1;
+
+	int  last_da_index;
+
+	struct sas_phy *phy;
+	struct sas_port *port;
+};
+
+struct expander_device {
+	struct list_head children;
+
+	u16    ex_change_count;
+	u16    max_route_indexes;
+	u8     num_phys;
+
+	u8     t2t_supp:1;
+	u8     configuring:1;
+	u8     conf_route_table:1;
+
+	u8     enclosure_logical_id[8];
+
+	struct ex_phy *ex_phy;
+	struct sas_port *parent_port;
+
+	struct mutex cmd_mutex;
+};
+
+/* ---------- SATA device ---------- */
+enum ata_command_set {
+        ATA_COMMAND_SET   = 0,
+        ATAPI_COMMAND_SET = 1,
+};
+
+#define ATA_RESP_FIS_SIZE 24
+
+struct sata_device {
+        enum   ata_command_set command_set;
+        struct smp_resp        rps_resp; /* report_phy_sata_resp */
+        u8     port_no;        /* port number, if this is a PM (Port) */
+        struct list_head children; /* PM Ports if this is a PM */
+
+	struct ata_port *ap;
+	struct ata_host ata_host;
+	u8     fis[ATA_RESP_FIS_SIZE];
+};
+
+enum {
+	SAS_DEV_GONE,
+	SAS_DEV_DESTROY,
+};
+
+struct domain_device {
+	spinlock_t done_lock;
+        enum sas_dev_type dev_type;
+
+        enum sas_linkrate linkrate;
+        enum sas_linkrate min_linkrate;
+        enum sas_linkrate max_linkrate;
+
+        int  pathways;
+
+        struct domain_device *parent;
+        struct list_head siblings; /* devices on the same level */
+        struct asd_sas_port *port;        /* shortcut to root of the tree */
+	struct sas_phy *phy;
+
+        struct list_head dev_list_node;
+	struct list_head disco_list_node; /* awaiting probe or destruct */
+
+        enum sas_protocol    iproto;
+        enum sas_protocol    tproto;
+
+        struct sas_rphy *rphy;
+
+        u8  sas_addr[SAS_ADDR_SIZE];
+        u8  hashed_sas_addr[HASHED_SAS_ADDR_SIZE];
+
+        u8  frame_rcvd[32];
+
+        union {
+                struct expander_device ex_dev;
+                struct sata_device     sata_dev; /* STP & directly attached */
+        };
+
+        void *lldd_dev;
+	unsigned long state;
+	struct kref kref;
+};
+
+struct sas_work {
+	struct list_head drain_node;
+	struct work_struct work;
+};
+
+static inline void INIT_SAS_WORK(struct sas_work *sw, void (*fn)(struct work_struct *))
+{
+	INIT_WORK(&sw->work, fn);
+	INIT_LIST_HEAD(&sw->drain_node);
+}
+
+struct sas_discovery_event {
+	struct sas_work work;
+	struct asd_sas_port *port;
+};
+
+static inline struct sas_discovery_event *to_sas_discovery_event(struct work_struct *work)
+{
+	struct sas_discovery_event *ev = container_of(work, typeof(*ev), work.work);
+
+	return ev;
+}
+
+struct sas_discovery {
+	struct sas_discovery_event disc_work[DISC_NUM_EVENTS];
+	unsigned long    pending;
+	u8     fanout_sas_addr[8];
+	u8     eeds_a[8];
+	u8     eeds_b[8];
+	int    max_level;
+};
+
+/* The port struct is Class:RW, driver:RO */
+struct asd_sas_port {
+/* private: */
+	struct completion port_gone_completion;
+
+	struct sas_discovery disc;
+	struct domain_device *port_dev;
+	spinlock_t dev_list_lock;
+	struct list_head dev_list;
+	struct list_head disco_list;
+	struct list_head destroy_list;
+	enum   sas_linkrate linkrate;
+
+	struct sas_work work;
+
+/* public: */
+	int id;
+
+	enum sas_class   class;
+	u8               sas_addr[SAS_ADDR_SIZE];
+	u8               attached_sas_addr[SAS_ADDR_SIZE];
+	enum sas_protocol   iproto;
+	enum sas_protocol   tproto;
+
+	enum sas_oob_mode oob_mode;
+
+	spinlock_t       phy_list_lock;
+	struct list_head phy_list;
+	int              num_phys;
+	u32              phy_mask;
+
+	struct sas_ha_struct *ha;
+
+	struct sas_port	*port;
+
+	void *lldd_port;	  /* not touched by the sas class code */
+};
+
+struct asd_sas_event {
+	struct sas_work work;
+	struct asd_sas_phy *phy;
+};
+
+static inline struct asd_sas_event *to_asd_sas_event(struct work_struct *work)
+{
+	struct asd_sas_event *ev = container_of(work, typeof(*ev), work.work);
+
+	return ev;
+}
+
+/* The phy pretty much is controlled by the LLDD.
+ * The class only reads those fields.
+ */
+struct asd_sas_phy {
+/* private: */
+	struct asd_sas_event   port_events[PORT_NUM_EVENTS];
+	struct asd_sas_event   phy_events[PHY_NUM_EVENTS];
+
+	unsigned long port_events_pending;
+	unsigned long phy_events_pending;
+
+	int error;
+
+	struct sas_phy *phy;
+
+/* public: */
+	/* The following are class:RO, driver:R/W */
+	int            enabled;	  /* must be set */
+
+	int            id;	  /* must be set */
+	enum sas_class class;
+	enum sas_protocol iproto;
+	enum sas_protocol tproto;
+
+	enum sas_phy_type  type;
+	enum sas_phy_role  role;
+	enum sas_oob_mode  oob_mode;
+	enum sas_linkrate linkrate;
+
+	u8   *sas_addr;		  /* must be set */
+	u8   attached_sas_addr[SAS_ADDR_SIZE]; /* class:RO, driver: R/W */
+
+	spinlock_t     frame_rcvd_lock;
+	u8             *frame_rcvd; /* must be set */
+	int            frame_rcvd_size;
+
+	spinlock_t     sas_prim_lock;
+	u32            sas_prim;
+
+	struct list_head port_phy_el; /* driver:RO */
+	struct asd_sas_port      *port; /* Class:RW, driver: RO */
+
+	struct sas_ha_struct *ha; /* may be set; the class sets it anyway */
+
+	void *lldd_phy;		  /* not touched by the sas_class_code */
+};
+
+struct scsi_core {
+	struct Scsi_Host *shost;
+
+	struct mutex	  task_queue_flush;
+	spinlock_t        task_queue_lock;
+	struct list_head  task_queue;
+	int               task_queue_size;
+
+	struct task_struct *queue_thread;
+};
+
+struct sas_ha_event {
+	struct sas_work work;
+	struct sas_ha_struct *ha;
+};
+
+static inline struct sas_ha_event *to_sas_ha_event(struct work_struct *work)
+{
+	struct sas_ha_event *ev = container_of(work, typeof(*ev), work.work);
+
+	return ev;
+}
+
+enum sas_ha_state {
+	SAS_HA_REGISTERED,
+	SAS_HA_DRAINING,
+	SAS_HA_ATA_EH_ACTIVE,
+	SAS_HA_FROZEN,
+};
+
+struct sas_ha_struct {
+/* private: */
+	struct sas_ha_event ha_events[HA_NUM_EVENTS];
+	unsigned long	 pending;
+
+	struct list_head  defer_q; /* work queued while draining */
+	struct mutex	  drain_mutex;
+	unsigned long	  state;
+	spinlock_t 	  state_lock;
+
+	struct mutex disco_mutex;
+
+	struct scsi_core core;
+
+/* public: */
+	char *sas_ha_name;
+	struct device *dev;	  /* should be set */
+	struct module *lldd_module; /* should be set */
+
+	u8 *sas_addr;		  /* must be set */
+	u8 hashed_sas_addr[HASHED_SAS_ADDR_SIZE];
+
+	spinlock_t      phy_port_lock;
+	struct asd_sas_phy  **sas_phy; /* array of valid pointers, must be set */
+	struct asd_sas_port **sas_port; /* array of valid pointers, must be set */
+	int             num_phys; /* must be set, gt 0, static */
+
+	/* The class calls this to send a task for execution. */
+	int lldd_max_execute_num;
+	int lldd_queue_size;
+	int strict_wide_ports; /* both sas_addr and attached_sas_addr must match
+				* their siblings when forming wide ports */
+
+	/* LLDD calls these to notify the class of an event. */
+	void (*notify_ha_event)(struct sas_ha_struct *, enum ha_event);
+	void (*notify_port_event)(struct asd_sas_phy *, enum port_event);
+	void (*notify_phy_event)(struct asd_sas_phy *, enum phy_event);
+
+	void *lldd_ha;		  /* not touched by sas class code */
+
+	struct list_head eh_done_q;  /* complete via scsi_eh_flush_done_q */
+	struct list_head eh_ata_q; /* scmds to promote from sas to ata eh */
+};
+
+#define SHOST_TO_SAS_HA(_shost) (*(struct sas_ha_struct **)(_shost)->hostdata)
+
+static inline struct domain_device *
+starget_to_domain_dev(struct scsi_target *starget) {
+	return starget->hostdata;
+}
+
+static inline struct domain_device *
+sdev_to_domain_dev(struct scsi_device *sdev) {
+	return starget_to_domain_dev(sdev->sdev_target);
+}
+
+static inline struct ata_device *sas_to_ata_dev(struct domain_device *dev)
+{
+	return &dev->sata_dev.ap->link.device[0];
+}
+
+static inline struct domain_device *
+cmd_to_domain_dev(struct scsi_cmnd *cmd)
+{
+	return sdev_to_domain_dev(cmd->device);
+}
+
+void sas_hash_addr(u8 *hashed, const u8 *sas_addr);
+
+/* Before calling a notify event, LLDD should use this function
+ * when the link is severed (possibly from its tasklet).
+ * The idea is that the Class only reads those, while the LLDD,
+ * can R/W these (thus avoiding a race).
+ */
+static inline void sas_phy_disconnected(struct asd_sas_phy *phy)
+{
+	phy->oob_mode = OOB_NOT_CONNECTED;
+	phy->linkrate = SAS_LINK_RATE_UNKNOWN;
+}
+
+static inline unsigned int to_sas_gpio_od(int device, int bit)
+{
+	return 3 * device + bit;
+}
+
+static inline void sas_put_local_phy(struct sas_phy *phy)
+{
+	put_device(&phy->dev);
+}
+
+#ifdef CONFIG_SCSI_SAS_HOST_SMP
+int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count);
+#else
+static inline int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count)
+{
+	return -1;
+}
+#endif
+
+/* ---------- Tasks ---------- */
+/*
+      service_response |  SAS_TASK_COMPLETE  |  SAS_TASK_UNDELIVERED |
+  exec_status          |                     |                       |
+  ---------------------+---------------------+-----------------------+
+       SAM_...         |         X           |                       |
+       DEV_NO_RESPONSE |         X           |           X           |
+       INTERRUPTED     |         X           |                       |
+       QUEUE_FULL      |                     |           X           |
+       DEVICE_UNKNOWN  |                     |           X           |
+       SG_ERR          |                     |           X           |
+  ---------------------+---------------------+-----------------------+
+ */
+
+enum service_response {
+	SAS_TASK_COMPLETE,
+	SAS_TASK_UNDELIVERED = -1,
+};
+
+enum exec_status {
+	/* The SAM_STAT_.. codes fit in the lower 6 bits, alias some of
+	 * them here to silence 'case value not in enumerated type' warnings
+	 */
+	__SAM_STAT_CHECK_CONDITION = SAM_STAT_CHECK_CONDITION,
+
+	SAS_DEV_NO_RESPONSE = 0x80,
+	SAS_DATA_UNDERRUN,
+	SAS_DATA_OVERRUN,
+	SAS_INTERRUPTED,
+	SAS_QUEUE_FULL,
+	SAS_DEVICE_UNKNOWN,
+	SAS_SG_ERR,
+	SAS_OPEN_REJECT,
+	SAS_OPEN_TO,
+	SAS_PROTO_RESPONSE,
+	SAS_PHY_DOWN,
+	SAS_NAK_R_ERR,
+	SAS_PENDING,
+	SAS_ABORTED_TASK,
+};
+
+/* When a task finishes with a response, the LLDD examines the
+ * response:
+ * 	- For an ATA task task_status_struct::stat is set to
+ * SAS_PROTO_RESPONSE, and the task_status_struct::buf is set to the
+ * contents of struct ata_task_resp.
+ * 	- For SSP tasks, if no data is present or status/TMF response
+ * is valid, task_status_struct::stat is set.  If data is present
+ * (SENSE data), the LLDD copies up to SAS_STATUS_BUF_SIZE, sets
+ * task_status_struct::buf_valid_size, and task_status_struct::stat is
+ * set to SAM_CHECK_COND.
+ *
+ * "buf" has format SCSI Sense for SSP task, or struct ata_task_resp
+ * for ATA task.
+ *
+ * "frame_len" is the total frame length, which could be more or less
+ * than actually copied.
+ *
+ * Tasks ending with response, always set the residual field.
+ */
+struct ata_task_resp {
+	u16  frame_len;
+	u8   ending_fis[ATA_RESP_FIS_SIZE];	  /* dev to host or data-in */
+};
+
+#define SAS_STATUS_BUF_SIZE 96
+
+struct task_status_struct {
+	enum service_response resp;
+	enum exec_status      stat;
+	int  buf_valid_size;
+
+	u8   buf[SAS_STATUS_BUF_SIZE];
+
+	u32  residual;
+	enum sas_open_rej_reason open_rej_reason;
+};
+
+/* ATA and ATAPI task queuable to a SAS LLDD.
+ */
+struct sas_ata_task {
+	struct host_to_dev_fis fis;
+	u8     atapi_packet[16];  /* 0 if not ATAPI task */
+
+	u8     retry_count;	  /* hardware retry, should be > 0 */
+
+	u8     dma_xfer:1;	  /* PIO:0 or DMA:1 */
+	u8     use_ncq:1;
+	u8     set_affil_pol:1;
+	u8     stp_affil_pol:1;
+
+	u8     device_control_reg_update:1;
+};
+
+struct sas_smp_task {
+	struct scatterlist smp_req;
+	struct scatterlist smp_resp;
+};
+
+enum task_attribute {
+	TASK_ATTR_SIMPLE = 0,
+	TASK_ATTR_HOQ    = 1,
+	TASK_ATTR_ORDERED= 2,
+	TASK_ATTR_ACA    = 4,
+};
+
+struct sas_ssp_task {
+	u8     retry_count;	  /* hardware retry, should be > 0 */
+
+	u8     LUN[8];
+	u8     enable_first_burst:1;
+	enum   task_attribute task_attr;
+	u8     task_prio;
+	u8     cdb[16];
+};
+
+struct sas_task {
+	struct domain_device *dev;
+	struct list_head      list;
+
+	spinlock_t   task_state_lock;
+	unsigned     task_state_flags;
+
+	enum   sas_protocol      task_proto;
+
+	/* Used by the discovery code. */
+	struct timer_list     timer;
+	struct completion     completion;
+
+	union {
+		struct sas_ata_task ata_task;
+		struct sas_smp_task smp_task;
+		struct sas_ssp_task ssp_task;
+	};
+
+	struct scatterlist *scatter;
+	int    num_scatter;
+	u32    total_xfer_len;
+	u8     data_dir:2;	  /* Use PCI_DMA_... */
+
+	struct task_status_struct task_status;
+	void   (*task_done)(struct sas_task *);
+
+	void   *lldd_task;	  /* for use by LLDDs */
+	void   *uldd_task;
+
+	struct work_struct abort_work;
+};
+
+#define SAS_TASK_STATE_PENDING      1
+#define SAS_TASK_STATE_DONE         2
+#define SAS_TASK_STATE_ABORTED      4
+#define SAS_TASK_NEED_DEV_RESET     8
+#define SAS_TASK_AT_INITIATOR       16
+
+extern struct sas_task *sas_alloc_task(gfp_t flags);
+extern void sas_free_task(struct sas_task *task);
+
+struct sas_domain_function_template {
+	/* The class calls these to notify the LLDD of an event. */
+	void (*lldd_port_formed)(struct asd_sas_phy *);
+	void (*lldd_port_deformed)(struct asd_sas_phy *);
+
+	/* The class calls these when a device is found or gone. */
+	int  (*lldd_dev_found)(struct domain_device *);
+	void (*lldd_dev_gone)(struct domain_device *);
+
+	int (*lldd_execute_task)(struct sas_task *, int num,
+				 gfp_t gfp_flags);
+
+	/* Task Management Functions. Must be called from process context. */
+	int (*lldd_abort_task)(struct sas_task *);
+	int (*lldd_abort_task_set)(struct domain_device *, u8 *lun);
+	int (*lldd_clear_aca)(struct domain_device *, u8 *lun);
+	int (*lldd_clear_task_set)(struct domain_device *, u8 *lun);
+	int (*lldd_I_T_nexus_reset)(struct domain_device *);
+	int (*lldd_ata_check_ready)(struct domain_device *);
+	void (*lldd_ata_set_dmamode)(struct domain_device *);
+	int (*lldd_lu_reset)(struct domain_device *, u8 *lun);
+	int (*lldd_query_task)(struct sas_task *);
+
+	/* Port and Adapter management */
+	int (*lldd_clear_nexus_port)(struct asd_sas_port *);
+	int (*lldd_clear_nexus_ha)(struct sas_ha_struct *);
+
+	/* Phy management */
+	int (*lldd_control_phy)(struct asd_sas_phy *, enum phy_func, void *);
+
+	/* GPIO support */
+	int (*lldd_write_gpio)(struct sas_ha_struct *, u8 reg_type,
+			       u8 reg_index, u8 reg_count, u8 *write_data);
+};
+
+extern int sas_register_ha(struct sas_ha_struct *);
+extern int sas_unregister_ha(struct sas_ha_struct *);
+
+int sas_set_phy_speed(struct sas_phy *phy,
+		      struct sas_phy_linkrates *rates);
+int sas_phy_reset(struct sas_phy *phy, int hard_reset);
+int sas_queue_up(struct sas_task *task);
+extern int sas_queuecommand(struct Scsi_Host * ,struct scsi_cmnd *);
+extern int sas_target_alloc(struct scsi_target *);
+extern int sas_slave_configure(struct scsi_device *);
+extern int sas_change_queue_depth(struct scsi_device *, int new_depth,
+				  int reason);
+extern int sas_change_queue_type(struct scsi_device *, int qt);
+extern int sas_bios_param(struct scsi_device *,
+			  struct block_device *,
+			  sector_t capacity, int *hsc);
+extern struct scsi_transport_template *
+sas_domain_attach_transport(struct sas_domain_function_template *);
+extern void sas_domain_release_transport(struct scsi_transport_template *);
+
+int  sas_discover_root_expander(struct domain_device *);
+
+void sas_init_ex_attr(void);
+
+int  sas_ex_revalidate_domain(struct domain_device *);
+
+void sas_unregister_domain_devices(struct asd_sas_port *port, int gone);
+void sas_init_disc(struct sas_discovery *disc, struct asd_sas_port *);
+int  sas_discover_event(struct asd_sas_port *, enum discover_event ev);
+
+int  sas_discover_sata(struct domain_device *);
+int  sas_discover_end_dev(struct domain_device *);
+
+void sas_unregister_dev(struct asd_sas_port *port, struct domain_device *);
+
+void sas_init_dev(struct domain_device *);
+
+void sas_task_abort(struct sas_task *);
+int sas_eh_device_reset_handler(struct scsi_cmnd *cmd);
+int sas_eh_bus_reset_handler(struct scsi_cmnd *cmd);
+
+extern void sas_target_destroy(struct scsi_target *);
+extern int sas_slave_alloc(struct scsi_device *);
+extern int sas_ioctl(struct scsi_device *sdev, int cmd, void __user *arg);
+extern int sas_drain_work(struct sas_ha_struct *ha);
+
+extern int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
+			   struct request *req);
+
+extern void sas_ssp_task_response(struct device *dev, struct sas_task *task,
+				  struct ssp_response_iu *iu);
+struct sas_phy *sas_get_local_phy(struct domain_device *dev);
+
+int sas_request_addr(struct Scsi_Host *shost, u8 *addr);
+
+#endif /* _SASLIB_H_ */
diff --git a/include/scsi/libsrp.h b/include/scsi/libsrp.h
new file mode 100644
index 00000000..f4105c91
--- /dev/null
+++ b/include/scsi/libsrp.h
@@ -0,0 +1,78 @@
+#ifndef __LIBSRP_H__
+#define __LIBSRP_H__
+
+#include <linux/list.h>
+#include <linux/kfifo.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_host.h>
+#include <scsi/srp.h>
+
+enum iue_flags {
+	V_DIOVER,
+	V_WRITE,
+	V_LINKED,
+	V_FLYING,
+};
+
+struct srp_buf {
+	dma_addr_t dma;
+	void *buf;
+};
+
+struct srp_queue {
+	void *pool;
+	void *items;
+	struct kfifo queue;
+	spinlock_t lock;
+};
+
+struct srp_target {
+	struct Scsi_Host *shost;
+	struct device *dev;
+
+	spinlock_t lock;
+	struct list_head cmd_queue;
+
+	size_t srp_iu_size;
+	struct srp_queue iu_queue;
+	size_t rx_ring_size;
+	struct srp_buf **rx_ring;
+
+	void *ldata;
+};
+
+struct iu_entry {
+	struct srp_target *target;
+
+	struct list_head ilist;
+	dma_addr_t remote_token;
+	unsigned long flags;
+
+	struct srp_buf *sbuf;
+};
+
+typedef int (srp_rdma_t)(struct scsi_cmnd *, struct scatterlist *, int,
+			 struct srp_direct_buf *, int,
+			 enum dma_data_direction, unsigned int);
+extern int srp_target_alloc(struct srp_target *, struct device *, size_t, size_t);
+extern void srp_target_free(struct srp_target *);
+
+extern struct iu_entry *srp_iu_get(struct srp_target *);
+extern void srp_iu_put(struct iu_entry *);
+
+extern int srp_cmd_queue(struct Scsi_Host *, struct srp_cmd *, void *, u64, u64);
+extern int srp_transfer_data(struct scsi_cmnd *, struct srp_cmd *,
+			     srp_rdma_t, int, int);
+
+
+static inline struct srp_target *host_to_srp_target(struct Scsi_Host *host)
+{
+	return (struct srp_target *) host->hostdata;
+}
+
+static inline int srp_cmd_direction(struct srp_cmd *cmd)
+{
+	return (cmd->buf_fmt >> 4) ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
+}
+
+#endif
diff --git a/include/scsi/osd_attributes.h b/include/scsi/osd_attributes.h
new file mode 100644
index 00000000..56e920ad
--- /dev/null
+++ b/include/scsi/osd_attributes.h
@@ -0,0 +1,397 @@
+#ifndef __OSD_ATTRIBUTES_H__
+#define __OSD_ATTRIBUTES_H__
+
+#include "osd_protocol.h"
+
+/*
+ * Contains types and constants that define attribute pages and attribute
+ * numbers and their data types.
+ */
+
+#define ATTR_SET(pg, id, l, ptr) \
+	{ .attr_page = pg, .attr_id = id, .len = l, .val_ptr = ptr }
+
+#define ATTR_DEF(pg, id, l) ATTR_SET(pg, id, l, NULL)
+
+/* osd-r10 4.7.3 Attributes pages */
+enum {
+	OSD_APAGE_OBJECT_FIRST		= 0x0,
+	OSD_APAGE_OBJECT_DIRECTORY	= 0,
+	OSD_APAGE_OBJECT_INFORMATION	= 1,
+	OSD_APAGE_OBJECT_QUOTAS		= 2,
+	OSD_APAGE_OBJECT_TIMESTAMP	= 3,
+	OSD_APAGE_OBJECT_COLLECTIONS	= 4,
+	OSD_APAGE_OBJECT_SECURITY	= 5,
+	OSD_APAGE_OBJECT_LAST		= 0x2fffffff,
+
+	OSD_APAGE_PARTITION_FIRST	= 0x30000000,
+	OSD_APAGE_PARTITION_DIRECTORY	= OSD_APAGE_PARTITION_FIRST + 0,
+	OSD_APAGE_PARTITION_INFORMATION = OSD_APAGE_PARTITION_FIRST + 1,
+	OSD_APAGE_PARTITION_QUOTAS	= OSD_APAGE_PARTITION_FIRST + 2,
+	OSD_APAGE_PARTITION_TIMESTAMP	= OSD_APAGE_PARTITION_FIRST + 3,
+	OSD_APAGE_PARTITION_ATTR_ACCESS = OSD_APAGE_PARTITION_FIRST + 4,
+	OSD_APAGE_PARTITION_SECURITY	= OSD_APAGE_PARTITION_FIRST + 5,
+	OSD_APAGE_PARTITION_LAST	= 0x5FFFFFFF,
+
+	OSD_APAGE_COLLECTION_FIRST	= 0x60000000,
+	OSD_APAGE_COLLECTION_DIRECTORY	= OSD_APAGE_COLLECTION_FIRST + 0,
+	OSD_APAGE_COLLECTION_INFORMATION = OSD_APAGE_COLLECTION_FIRST + 1,
+	OSD_APAGE_COLLECTION_TIMESTAMP	= OSD_APAGE_COLLECTION_FIRST + 3,
+	OSD_APAGE_COLLECTION_SECURITY	= OSD_APAGE_COLLECTION_FIRST + 5,
+	OSD_APAGE_COLLECTION_LAST	= 0x8FFFFFFF,
+
+	OSD_APAGE_ROOT_FIRST		= 0x90000000,
+	OSD_APAGE_ROOT_DIRECTORY	= OSD_APAGE_ROOT_FIRST + 0,
+	OSD_APAGE_ROOT_INFORMATION	= OSD_APAGE_ROOT_FIRST + 1,
+	OSD_APAGE_ROOT_QUOTAS		= OSD_APAGE_ROOT_FIRST + 2,
+	OSD_APAGE_ROOT_TIMESTAMP	= OSD_APAGE_ROOT_FIRST + 3,
+	OSD_APAGE_ROOT_SECURITY		= OSD_APAGE_ROOT_FIRST + 5,
+	OSD_APAGE_ROOT_LAST		= 0xBFFFFFFF,
+
+	OSD_APAGE_RESERVED_TYPE_FIRST	= 0xC0000000,
+	OSD_APAGE_RESERVED_TYPE_LAST	= 0xEFFFFFFF,
+
+	OSD_APAGE_COMMON_FIRST		= 0xF0000000,
+	OSD_APAGE_COMMON_LAST		= 0xFFFFFFFD,
+
+	OSD_APAGE_CURRENT_COMMAND	= 0xFFFFFFFE,
+
+	OSD_APAGE_REQUEST_ALL		= 0xFFFFFFFF,
+};
+
+/* subcategories of attr pages within each range above */
+enum {
+	OSD_APAGE_STD_FIRST		= 0x0,
+	OSD_APAGE_STD_DIRECTORY		= 0,
+	OSD_APAGE_STD_INFORMATION	= 1,
+	OSD_APAGE_STD_QUOTAS		= 2,
+	OSD_APAGE_STD_TIMESTAMP		= 3,
+	OSD_APAGE_STD_COLLECTIONS	= 4,
+	OSD_APAGE_STD_POLICY_SECURITY	= 5,
+	OSD_APAGE_STD_LAST		= 0x0000007F,
+
+	OSD_APAGE_RESERVED_FIRST	= 0x00000080,
+	OSD_APAGE_RESERVED_LAST		= 0x00007FFF,
+
+	OSD_APAGE_OTHER_STD_FIRST	= 0x00008000,
+	OSD_APAGE_OTHER_STD_LAST	= 0x0000EFFF,
+
+	OSD_APAGE_PUBLIC_FIRST		= 0x0000F000,
+	OSD_APAGE_PUBLIC_LAST		= 0x0000FFFF,
+
+	OSD_APAGE_APP_DEFINED_FIRST	= 0x00010000,
+	OSD_APAGE_APP_DEFINED_LAST	= 0x1FFFFFFF,
+
+	OSD_APAGE_VENDOR_SPECIFIC_FIRST	= 0x20000000,
+	OSD_APAGE_VENDOR_SPECIFIC_LAST	= 0x2FFFFFFF,
+};
+
+enum {
+	OSD_ATTR_PAGE_IDENTIFICATION = 0, /* in all pages 40 bytes */
+};
+
+struct page_identification {
+	u8 vendor_identification[8];
+	u8 page_identification[32];
+}  __packed;
+
+struct osd_attr_page_header {
+	__be32 page_number;
+	__be32 page_length;
+} __packed;
+
+/* 7.1.2.8 Root Information attributes page (OSD_APAGE_ROOT_INFORMATION) */
+enum {
+	OSD_ATTR_RI_OSD_SYSTEM_ID            = 0x3,   /* 20       */
+	OSD_ATTR_RI_VENDOR_IDENTIFICATION    = 0x4,   /* 8        */
+	OSD_ATTR_RI_PRODUCT_IDENTIFICATION   = 0x5,   /* 16       */
+	OSD_ATTR_RI_PRODUCT_MODEL            = 0x6,   /* 32       */
+	OSD_ATTR_RI_PRODUCT_REVISION_LEVEL   = 0x7,   /* 4        */
+	OSD_ATTR_RI_PRODUCT_SERIAL_NUMBER    = 0x8,   /* variable */
+	OSD_ATTR_RI_OSD_NAME                 = 0x9,   /* variable */
+	OSD_ATTR_RI_MAX_CDB_CONTINUATION_LEN = 0xA,   /* 4        */
+	OSD_ATTR_RI_TOTAL_CAPACITY           = 0x80,  /* 8        */
+	OSD_ATTR_RI_USED_CAPACITY            = 0x81,  /* 8        */
+	OSD_ATTR_RI_NUMBER_OF_PARTITIONS     = 0xC0,  /* 8        */
+	OSD_ATTR_RI_CLOCK                    = 0x100, /* 6        */
+	OARI_DEFAULT_ISOLATION_METHOD        = 0X110, /* 1        */
+	OARI_SUPPORTED_ISOLATION_METHODS     = 0X111, /* 32       */
+
+	OARI_DATA_ATOMICITY_GUARANTEE                   = 0X120,   /* 8       */
+	OARI_DATA_ATOMICITY_ALIGNMENT                   = 0X121,   /* 8       */
+	OARI_ATTRIBUTES_ATOMICITY_GUARANTEE             = 0X122,   /* 8       */
+	OARI_DATA_ATTRIBUTES_ATOMICITY_MULTIPLIER       = 0X123,   /* 1       */
+
+	OARI_MAXIMUM_SNAPSHOTS_COUNT                    = 0X1C1,    /* 0 or 4 */
+	OARI_MAXIMUM_CLONES_COUNT                       = 0X1C2,    /* 0 or 4 */
+	OARI_MAXIMUM_BRANCH_DEPTH                       = 0X1CC,    /* 0 or 4 */
+	OARI_SUPPORTED_OBJECT_DUPLICATION_METHOD_FIRST  = 0X200,    /* 0 or 4 */
+	OARI_SUPPORTED_OBJECT_DUPLICATION_METHOD_LAST   = 0X2ff,    /* 0 or 4 */
+	OARI_SUPPORTED_TIME_OF_DUPLICATION_METHOD_FIRST = 0X300,    /* 0 or 4 */
+	OARI_SUPPORTED_TIME_OF_DUPLICATION_METHOD_LAST  = 0X30F,    /* 0 or 4 */
+	OARI_SUPPORT_FOR_DUPLICATED_OBJECT_FREEZING     = 0X310,    /* 0 or 4 */
+	OARI_SUPPORT_FOR_SNAPSHOT_REFRESHING            = 0X311,    /* 0 or 1 */
+	OARI_SUPPORTED_CDB_CONTINUATION_DESC_TYPE_FIRST = 0X7000001,/* 0 or 4 */
+	OARI_SUPPORTED_CDB_CONTINUATION_DESC_TYPE_LAST  = 0X700FFFF,/* 0 or 4 */
+};
+/* Root_Information_attributes_page does not have a get_page structure */
+
+/* 7.1.2.9 Partition Information attributes page
+ * (OSD_APAGE_PARTITION_INFORMATION)
+ */
+enum {
+	OSD_ATTR_PI_PARTITION_ID            = 0x1,     /* 8        */
+	OSD_ATTR_PI_USERNAME                = 0x9,     /* variable */
+	OSD_ATTR_PI_USED_CAPACITY           = 0x81,    /* 8        */
+	OSD_ATTR_PI_USED_CAPACITY_INCREMENT = 0x84,    /* 0 or 8   */
+	OSD_ATTR_PI_NUMBER_OF_OBJECTS       = 0xC1,    /* 8        */
+
+	OSD_ATTR_PI_ACTUAL_DATA_SPACE                      = 0xD1, /* 0 or 8 */
+	OSD_ATTR_PI_RESERVED_DATA_SPACE                    = 0xD2, /* 0 or 8 */
+	OSD_ATTR_PI_DEFAULT_SNAPSHOT_DUPLICATION_METHOD    = 0x200,/* 0 or 4 */
+	OSD_ATTR_PI_DEFAULT_CLONE_DUPLICATION_METHOD       = 0x201,/* 0 or 4 */
+	OSD_ATTR_PI_DEFAULT_SP_TIME_OF_DUPLICATION         = 0x300,/* 0 or 4 */
+	OSD_ATTR_PI_DEFAULT_CLONE_TIME_OF_DUPLICATION      = 0x301,/* 0 or 4 */
+};
+/* Partition Information attributes page does not have a get_page structure */
+
+/* 7.1.2.10 Collection Information attributes page
+ * (OSD_APAGE_COLLECTION_INFORMATION)
+ */
+enum {
+	OSD_ATTR_CI_PARTITION_ID           = 0x1,       /* 8        */
+	OSD_ATTR_CI_COLLECTION_OBJECT_ID   = 0x2,       /* 8        */
+	OSD_ATTR_CI_USERNAME               = 0x9,       /* variable */
+	OSD_ATTR_CI_COLLECTION_TYPE        = 0xA,       /* 1        */
+	OSD_ATTR_CI_USED_CAPACITY          = 0x81,      /* 8        */
+};
+/* Collection Information attributes page does not have a get_page structure */
+
+/* 7.1.2.11 User Object Information attributes page
+ * (OSD_APAGE_OBJECT_INFORMATION)
+ */
+enum {
+	OSD_ATTR_OI_PARTITION_ID         = 0x1,       /* 8        */
+	OSD_ATTR_OI_OBJECT_ID            = 0x2,       /* 8        */
+	OSD_ATTR_OI_USERNAME             = 0x9,       /* variable */
+	OSD_ATTR_OI_USED_CAPACITY        = 0x81,      /* 8        */
+	OSD_ATTR_OI_LOGICAL_LENGTH       = 0x82,      /* 8        */
+	SD_ATTR_OI_ACTUAL_DATA_SPACE     = 0XD1,      /* 0 OR 8   */
+	SD_ATTR_OI_RESERVED_DATA_SPACE   = 0XD2,      /* 0 OR 8   */
+};
+/* Object Information attributes page does not have a get_page structure */
+
+/* 7.1.2.12 Root Quotas attributes page (OSD_APAGE_ROOT_QUOTAS) */
+enum {
+	OSD_ATTR_RQ_DEFAULT_MAXIMUM_USER_OBJECT_LENGTH     = 0x1,      /* 8  */
+	OSD_ATTR_RQ_PARTITION_CAPACITY_QUOTA               = 0x10001,  /* 8  */
+	OSD_ATTR_RQ_PARTITION_OBJECT_COUNT                 = 0x10002,  /* 8  */
+	OSD_ATTR_RQ_PARTITION_COLLECTIONS_PER_USER_OBJECT  = 0x10081,  /* 4  */
+	OSD_ATTR_RQ_PARTITION_COUNT                        = 0x20002,  /* 8  */
+};
+
+struct Root_Quotas_attributes_page {
+	struct osd_attr_page_header hdr; /* id=R+2, size=0x24 */
+	__be64 default_maximum_user_object_length;
+	__be64 partition_capacity_quota;
+	__be64 partition_object_count;
+	__be64 partition_collections_per_user_object;
+	__be64 partition_count;
+}  __packed;
+
+/* 7.1.2.13 Partition Quotas attributes page (OSD_APAGE_PARTITION_QUOTAS)*/
+enum {
+	OSD_ATTR_PQ_DEFAULT_MAXIMUM_USER_OBJECT_LENGTH  = 0x1,        /* 8 */
+	OSD_ATTR_PQ_CAPACITY_QUOTA                      = 0x10001,    /* 8 */
+	OSD_ATTR_PQ_OBJECT_COUNT                        = 0x10002,    /* 8 */
+	OSD_ATTR_PQ_COLLECTIONS_PER_USER_OBJECT         = 0x10081,    /* 4 */
+};
+
+struct Partition_Quotas_attributes_page {
+	struct osd_attr_page_header hdr; /* id=P+2, size=0x1C */
+	__be64 default_maximum_user_object_length;
+	__be64 capacity_quota;
+	__be64 object_count;
+	__be64 collections_per_user_object;
+}  __packed;
+
+/* 7.1.2.14 User Object Quotas attributes page (OSD_APAGE_OBJECT_QUOTAS) */
+enum {
+	OSD_ATTR_OQ_MAXIMUM_LENGTH  = 0x1,        /* 8 */
+};
+
+struct Object_Quotas_attributes_page {
+	struct osd_attr_page_header hdr; /* id=U+2, size=0x8 */
+	__be64 maximum_length;
+}  __packed;
+
+/* 7.1.2.15 Root Timestamps attributes page (OSD_APAGE_ROOT_TIMESTAMP) */
+enum {
+	OSD_ATTR_RT_ATTRIBUTES_ACCESSED_TIME  = 0x2,        /* 6 */
+	OSD_ATTR_RT_ATTRIBUTES_MODIFIED_TIME  = 0x3,        /* 6 */
+	OSD_ATTR_RT_TIMESTAMP_BYPASS          = 0xFFFFFFFE, /* 1 */
+};
+
+struct root_timestamps_attributes_page {
+	struct osd_attr_page_header hdr; /* id=R+3, size=0xD */
+	struct osd_timestamp attributes_accessed_time;
+	struct osd_timestamp attributes_modified_time;
+	u8 timestamp_bypass;
+}  __packed;
+
+/* 7.1.2.16 Partition Timestamps attributes page
+ * (OSD_APAGE_PARTITION_TIMESTAMP)
+ */
+enum {
+	OSD_ATTR_PT_CREATED_TIME              = 0x1,        /* 6 */
+	OSD_ATTR_PT_ATTRIBUTES_ACCESSED_TIME  = 0x2,        /* 6 */
+	OSD_ATTR_PT_ATTRIBUTES_MODIFIED_TIME  = 0x3,        /* 6 */
+	OSD_ATTR_PT_DATA_ACCESSED_TIME        = 0x4,        /* 6 */
+	OSD_ATTR_PT_DATA_MODIFIED_TIME        = 0x5,        /* 6 */
+	OSD_ATTR_PT_TIMESTAMP_BYPASS          = 0xFFFFFFFE, /* 1 */
+};
+
+struct partition_timestamps_attributes_page {
+	struct osd_attr_page_header hdr; /* id=P+3, size=0x1F */
+	struct osd_timestamp created_time;
+	struct osd_timestamp attributes_accessed_time;
+	struct osd_timestamp attributes_modified_time;
+	struct osd_timestamp data_accessed_time;
+	struct osd_timestamp data_modified_time;
+	u8 timestamp_bypass;
+}  __packed;
+
+/* 7.1.2.17/18 Collection/Object Timestamps attributes page
+ * (OSD_APAGE_COLLECTION_TIMESTAMP/OSD_APAGE_OBJECT_TIMESTAMP)
+ */
+enum {
+	OSD_ATTR_OT_CREATED_TIME              = 0x1,        /* 6 */
+	OSD_ATTR_OT_ATTRIBUTES_ACCESSED_TIME  = 0x2,        /* 6 */
+	OSD_ATTR_OT_ATTRIBUTES_MODIFIED_TIME  = 0x3,        /* 6 */
+	OSD_ATTR_OT_DATA_ACCESSED_TIME        = 0x4,        /* 6 */
+	OSD_ATTR_OT_DATA_MODIFIED_TIME        = 0x5,        /* 6 */
+};
+
+/* same for collection */
+struct object_timestamps_attributes_page {
+	struct osd_attr_page_header hdr; /* id=C+3/3, size=0x1E */
+	struct osd_timestamp created_time;
+	struct osd_timestamp attributes_accessed_time;
+	struct osd_timestamp attributes_modified_time;
+	struct osd_timestamp data_accessed_time;
+	struct osd_timestamp data_modified_time;
+}  __packed;
+
+/* OSD2r05: 7.1.3.19 Attributes Access attributes page
+ * (OSD_APAGE_PARTITION_ATTR_ACCESS)
+ *
+ * each attribute is of the form below. Total array length is deduced
+ * from the attribute's length
+ * (See allowed_attributes_access of the struct osd_cap_object_descriptor)
+ */
+struct attributes_access_attr {
+	struct osd_attributes_list_attrid attr_list[0];
+} __packed;
+
+/* OSD2r05: 7.1.2.21 Collections attributes page */
+/* TBD */
+
+/* 7.1.2.20 Root Policy/Security attributes page (OSD_APAGE_ROOT_SECURITY) */
+enum {
+	OSD_ATTR_RS_DEFAULT_SECURITY_METHOD           = 0x1,       /* 1      */
+	OSD_ATTR_RS_OLDEST_VALID_NONCE_LIMIT          = 0x2,       /* 6      */
+	OSD_ATTR_RS_NEWEST_VALID_NONCE_LIMIT          = 0x3,       /* 6      */
+	OSD_ATTR_RS_PARTITION_DEFAULT_SECURITY_METHOD = 0x6,       /* 1      */
+	OSD_ATTR_RS_SUPPORTED_SECURITY_METHODS        = 0x7,       /* 2      */
+	OSD_ATTR_RS_ADJUSTABLE_CLOCK                  = 0x9,       /* 6      */
+	OSD_ATTR_RS_MASTER_KEY_IDENTIFIER             = 0x7FFD,    /* 0 or 7 */
+	OSD_ATTR_RS_ROOT_KEY_IDENTIFIER               = 0x7FFE,    /* 0 or 7 */
+	OSD_ATTR_RS_SUPPORTED_INTEGRITY_ALGORITHM_0   = 0x80000000,/* 1,(x16)*/
+	OSD_ATTR_RS_SUPPORTED_DH_GROUP_0              = 0x80000010,/* 1,(x16)*/
+};
+
+struct root_security_attributes_page {
+	struct osd_attr_page_header hdr; /* id=R+5, size=0x3F */
+	u8 default_security_method;
+	u8 partition_default_security_method;
+	__be16 supported_security_methods;
+	u8 mki_valid_rki_valid;
+	struct osd_timestamp oldest_valid_nonce_limit;
+	struct osd_timestamp newest_valid_nonce_limit;
+	struct osd_timestamp adjustable_clock;
+	u8 master_key_identifier[32-25];
+	u8 root_key_identifier[39-32];
+	u8 supported_integrity_algorithm[16];
+	u8 supported_dh_group[16];
+}  __packed;
+
+/* 7.1.2.21 Partition Policy/Security attributes page
+ * (OSD_APAGE_PARTITION_SECURITY)
+ */
+enum {
+	OSD_ATTR_PS_DEFAULT_SECURITY_METHOD        = 0x1,        /* 1      */
+	OSD_ATTR_PS_OLDEST_VALID_NONCE             = 0x2,        /* 6      */
+	OSD_ATTR_PS_NEWEST_VALID_NONCE             = 0x3,        /* 6      */
+	OSD_ATTR_PS_REQUEST_NONCE_LIST_DEPTH       = 0x4,        /* 2      */
+	OSD_ATTR_PS_FROZEN_WORKING_KEY_BIT_MASK    = 0x5,        /* 2      */
+	OSD_ATTR_PS_PARTITION_KEY_IDENTIFIER       = 0x7FFF,     /* 0 or 7 */
+	OSD_ATTR_PS_WORKING_KEY_IDENTIFIER_FIRST   = 0x8000,     /* 0 or 7 */
+	OSD_ATTR_PS_WORKING_KEY_IDENTIFIER_LAST    = 0x800F,     /* 0 or 7 */
+	OSD_ATTR_PS_POLICY_ACCESS_TAG              = 0x40000001, /* 4      */
+	OSD_ATTR_PS_USER_OBJECT_POLICY_ACCESS_TAG  = 0x40000002, /* 4      */
+};
+
+struct partition_security_attributes_page {
+	struct osd_attr_page_header hdr; /* id=p+5, size=0x8f */
+	u8 reserved[3];
+	u8 default_security_method;
+	struct osd_timestamp oldest_valid_nonce;
+	struct osd_timestamp newest_valid_nonce;
+	__be16 request_nonce_list_depth;
+	__be16 frozen_working_key_bit_mask;
+	__be32 policy_access_tag;
+	__be32 user_object_policy_access_tag;
+	u8 pki_valid;
+	__be16 wki_00_0f_vld;
+	struct osd_key_identifier partition_key_identifier;
+	struct osd_key_identifier working_key_identifiers[16];
+}  __packed;
+
+/* 7.1.2.22/23 Collection/Object Policy-Security attributes page
+ * (OSD_APAGE_COLLECTION_SECURITY/OSD_APAGE_OBJECT_SECURITY)
+ */
+enum {
+	OSD_ATTR_OS_POLICY_ACCESS_TAG              = 0x40000001, /* 4      */
+};
+
+struct object_security_attributes_page {
+	struct osd_attr_page_header hdr; /* id=C+5/5, size=4 */
+	__be32 policy_access_tag;
+}  __packed;
+
+/* OSD2r05: 7.1.3.31 Current Command attributes page
+ * (OSD_APAGE_CURRENT_COMMAND)
+ */
+enum {
+	OSD_ATTR_CC_RESPONSE_INTEGRITY_CHECK_VALUE     = 0x1, /* 32  */
+	OSD_ATTR_CC_OBJECT_TYPE                        = 0x2, /* 1   */
+	OSD_ATTR_CC_PARTITION_ID                       = 0x3, /* 8   */
+	OSD_ATTR_CC_OBJECT_ID                          = 0x4, /* 8   */
+	OSD_ATTR_CC_STARTING_BYTE_ADDRESS_OF_APPEND    = 0x5, /* 8   */
+	OSD_ATTR_CC_CHANGE_IN_USED_CAPACITY            = 0x6, /* 8   */
+};
+
+/*TBD: osdv1_current_command_attributes_page */
+
+struct osdv2_current_command_attributes_page {
+	struct osd_attr_page_header hdr;  /* id=0xFFFFFFFE, size=0x44 */
+	u8 response_integrity_check_value[OSD_CRYPTO_KEYID_SIZE];
+	u8 object_type;
+	u8 reserved[3];
+	__be64 partition_id;
+	__be64 object_id;
+	__be64 starting_byte_address_of_append;
+	__be64 change_in_used_capacity;
+};
+
+#endif /*ndef __OSD_ATTRIBUTES_H__*/
diff --git a/include/scsi/osd_initiator.h b/include/scsi/osd_initiator.h
new file mode 100644
index 00000000..572fb549
--- /dev/null
+++ b/include/scsi/osd_initiator.h
@@ -0,0 +1,515 @@
+/*
+ * osd_initiator.h - OSD initiator API definition
+ *
+ * Copyright (C) 2008 Panasas Inc.  All rights reserved.
+ *
+ * Authors:
+ *   Boaz Harrosh <bharrosh@panasas.com>
+ *   Benny Halevy <bhalevy@panasas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ *
+ */
+#ifndef __OSD_INITIATOR_H__
+#define __OSD_INITIATOR_H__
+
+#include "osd_protocol.h"
+#include "osd_types.h"
+
+#include <linux/blkdev.h>
+#include <scsi/scsi_device.h>
+
+/* Note: "NI" in comments below means "Not Implemented yet" */
+
+/* Configure of code:
+ * #undef if you *don't* want OSD v1 support in runtime.
+ * If #defined the initiator will dynamically configure to encode OSD v1
+ * CDB's if the target is detected to be OSD v1 only.
+ * OSD v2 only commands, options, and attributes will be ignored if target
+ * is v1 only.
+ * If #defined will result in bigger/slower code (OK Slower maybe not)
+ * Q: Should this be CONFIG_SCSI_OSD_VER1_SUPPORT and set from Kconfig?
+ */
+#define OSD_VER1_SUPPORT y
+
+enum osd_std_version {
+	OSD_VER_NONE = 0,
+	OSD_VER1 = 1,
+	OSD_VER2 = 2,
+};
+
+/*
+ * Object-based Storage Device.
+ * This object represents an OSD device.
+ * It is not a full linux device in any way. It is only
+ * a place to hang resources associated with a Linux
+ * request Q and some default properties.
+ */
+struct osd_dev {
+	struct scsi_device *scsi_device;
+	unsigned def_timeout;
+
+#ifdef OSD_VER1_SUPPORT
+	enum osd_std_version version;
+#endif
+};
+
+/* Unique Identification of an OSD device */
+struct osd_dev_info {
+	unsigned systemid_len;
+	u8 systemid[OSD_SYSTEMID_LEN];
+	unsigned osdname_len;
+	u8 *osdname;
+};
+
+/* Retrieve/return osd_dev(s) for use by Kernel clients
+ * Use IS_ERR/ERR_PTR on returned "osd_dev *".
+ */
+struct osd_dev *osduld_path_lookup(const char *dev_name);
+struct osd_dev *osduld_info_lookup(const struct osd_dev_info *odi);
+void osduld_put_device(struct osd_dev *od);
+
+const struct osd_dev_info *osduld_device_info(struct osd_dev *od);
+bool osduld_device_same(struct osd_dev *od, const struct osd_dev_info *odi);
+
+/* Add/remove test ioctls from external modules */
+typedef int (do_test_fn)(struct osd_dev *od, unsigned cmd, unsigned long arg);
+int osduld_register_test(unsigned ioctl, do_test_fn *do_test);
+void osduld_unregister_test(unsigned ioctl);
+
+/* These are called by uld at probe time */
+void osd_dev_init(struct osd_dev *od, struct scsi_device *scsi_device);
+void osd_dev_fini(struct osd_dev *od);
+
+/**
+ * osd_auto_detect_ver - Detect the OSD version, return Unique Identification
+ *
+ * @od:     OSD target lun handle
+ * @caps:   Capabilities authorizing OSD root read attributes access
+ * @odi:    Retrieved information uniquely identifying the osd target lun
+ *          Note: odi->osdname must be kfreed by caller.
+ *
+ * Auto detects the OSD version of the OSD target and sets the @od
+ * accordingly. Meanwhile also returns the "system id" and "osd name" root
+ * attributes which uniquely identify the OSD target. This member is usually
+ * called by the ULD. ULD users should call osduld_device_info().
+ * This rutine allocates osd requests and memory at GFP_KERNEL level and might
+ * sleep.
+ */
+int osd_auto_detect_ver(struct osd_dev *od,
+	void *caps, struct osd_dev_info *odi);
+
+static inline struct request_queue *osd_request_queue(struct osd_dev *od)
+{
+	return od->scsi_device->request_queue;
+}
+
+/* we might want to use function vector in the future */
+static inline void osd_dev_set_ver(struct osd_dev *od, enum osd_std_version v)
+{
+#ifdef OSD_VER1_SUPPORT
+	od->version = v;
+#endif
+}
+
+static inline bool osd_dev_is_ver1(struct osd_dev *od)
+{
+#ifdef OSD_VER1_SUPPORT
+	return od->version == OSD_VER1;
+#else
+	return false;
+#endif
+}
+
+struct osd_request;
+typedef void (osd_req_done_fn)(struct osd_request *or, void *private);
+
+struct osd_request {
+	struct osd_cdb cdb;
+	struct osd_data_out_integrity_info out_data_integ;
+	struct osd_data_in_integrity_info in_data_integ;
+
+	struct osd_dev *osd_dev;
+	struct request *request;
+
+	struct _osd_req_data_segment {
+		void *buff;
+		unsigned alloc_size; /* 0 here means: don't call kfree */
+		unsigned total_bytes;
+	} cdb_cont, set_attr, enc_get_attr, get_attr;
+
+	struct _osd_io_info {
+		struct bio *bio;
+		u64 total_bytes;
+		u64 residual;
+		struct request *req;
+		struct _osd_req_data_segment *last_seg;
+		u8 *pad_buff;
+	} out, in;
+
+	gfp_t alloc_flags;
+	unsigned timeout;
+	unsigned retries;
+	unsigned sense_len;
+	u8 sense[OSD_MAX_SENSE_LEN];
+	enum osd_attributes_mode attributes_mode;
+
+	osd_req_done_fn *async_done;
+	void *async_private;
+	int async_error;
+	int req_errors;
+};
+
+static inline bool osd_req_is_ver1(struct osd_request *or)
+{
+	return osd_dev_is_ver1(or->osd_dev);
+}
+
+/*
+ * How to use the osd library:
+ *
+ * osd_start_request
+ *	Allocates a request.
+ *
+ * osd_req_*
+ *	Call one of, to encode the desired operation.
+ *
+ * osd_add_{get,set}_attr
+ *	Optionally add attributes to the CDB, list or page mode.
+ *
+ * osd_finalize_request
+ *	Computes final data out/in offsets and signs the request,
+ *	making it ready for execution.
+ *
+ * osd_execute_request
+ *	May be called to execute it through the block layer. Other wise submit
+ *	the associated block request in some other way.
+ *
+ * After execution:
+ * osd_req_decode_sense
+ *	Decodes sense information to verify execution results.
+ *
+ * osd_req_decode_get_attr
+ *	Retrieve osd_add_get_attr_list() values if used.
+ *
+ * osd_end_request
+ *	Must be called to deallocate the request.
+ */
+
+/**
+ * osd_start_request - Allocate and initialize an osd_request
+ *
+ * @osd_dev:    OSD device that holds the scsi-device and default values
+ *              that the request is associated with.
+ * @gfp:        The allocation flags to use for request allocation, and all
+ *              subsequent allocations. This will be stored at
+ *              osd_request->alloc_flags, can be changed by user later
+ *
+ * Allocate osd_request and initialize all members to the
+ * default/initial state.
+ */
+struct osd_request *osd_start_request(struct osd_dev *od, gfp_t gfp);
+
+enum osd_req_options {
+	OSD_REQ_FUA = 0x08,	/* Force Unit Access */
+	OSD_REQ_DPO = 0x10,	/* Disable Page Out */
+
+	OSD_REQ_BYPASS_TIMESTAMPS = 0x80,
+};
+
+/**
+ * osd_finalize_request - Sign request and prepare request for execution
+ *
+ * @or:		osd_request to prepare
+ * @options:	combination of osd_req_options bit flags or 0.
+ * @cap:	A Pointer to an OSD_CAP_LEN bytes buffer that is received from
+ *              The security manager as capabilities for this cdb.
+ * @cap_key:	The cryptographic key used to sign the cdb/data. Can be null
+ *              if NOSEC is used.
+ *
+ * The actual request and bios are only allocated here, so are the get_attr
+ * buffers that will receive the returned attributes. Copy's @cap to cdb.
+ * Sign the cdb/data with @cap_key.
+ */
+int osd_finalize_request(struct osd_request *or,
+	u8 options, const void *cap, const u8 *cap_key);
+
+/**
+ * osd_execute_request - Execute the request synchronously through block-layer
+ *
+ * @or:		osd_request to Executed
+ *
+ * Calls blk_execute_rq to q the command and waits for completion.
+ */
+int osd_execute_request(struct osd_request *or);
+
+/**
+ * osd_execute_request_async - Execute the request without waitting.
+ *
+ * @or:                      - osd_request to Executed
+ * @done: (Optional)         - Called at end of execution
+ * @private:                 - Will be passed to @done function
+ *
+ * Calls blk_execute_rq_nowait to queue the command. When execution is done
+ * optionally calls @done with @private as parameter. @or->async_error will
+ * have the return code
+ */
+int osd_execute_request_async(struct osd_request *or,
+	osd_req_done_fn *done, void *private);
+
+/**
+ * osd_req_decode_sense_full - Decode sense information after execution.
+ *
+ * @or:           - osd_request to examine
+ * @osi           - Receives a more detailed error report information (optional).
+ * @silent        - Do not print to dmsg (Even if enabled)
+ * @bad_obj_list  - Some commands act on multiple objects. Failed objects will
+ *                  be received here (optional)
+ * @max_obj       - Size of @bad_obj_list.
+ * @bad_attr_list - List of failing attributes (optional)
+ * @max_attr      - Size of @bad_attr_list.
+ *
+ * After execution, osd_request results are analyzed using this function. The
+ * return code is the final disposition on the error. So it is possible that a
+ * CHECK_CONDITION was returned from target but this will return NO_ERROR, for
+ * example on recovered errors. All parameters are optional if caller does
+ * not need any returned information.
+ * Note: This function will also dump the error to dmsg according to settings
+ * of the SCSI_OSD_DPRINT_SENSE Kconfig value. Set @silent if you know the
+ * command would routinely fail, to not spam the dmsg file.
+ */
+
+/**
+ * osd_err_priority - osd categorized return codes in ascending severity.
+ *
+ * The categories are borrowed from the pnfs_osd_errno enum.
+ * See comments for translated Linux codes returned by osd_req_decode_sense.
+ */
+enum osd_err_priority {
+	OSD_ERR_PRI_NO_ERROR	= 0,
+	/* Recoverable, caller should clear_highpage() all pages */
+	OSD_ERR_PRI_CLEAR_PAGES = 1, /* -EFAULT */
+	OSD_ERR_PRI_RESOURCE	= 2, /* -ENOMEM */
+	OSD_ERR_PRI_BAD_CRED	= 3, /* -EINVAL */
+	OSD_ERR_PRI_NO_ACCESS	= 4, /* -EACCES */
+	OSD_ERR_PRI_UNREACHABLE	= 5, /* any other */
+	OSD_ERR_PRI_NOT_FOUND	= 6, /* -ENOENT */
+	OSD_ERR_PRI_NO_SPACE	= 7, /* -ENOSPC */
+	OSD_ERR_PRI_EIO		= 8, /* -EIO    */
+};
+
+struct osd_sense_info {
+	enum osd_err_priority osd_err_pri;
+
+	int key;		/* one of enum scsi_sense_keys */
+	int additional_code ;	/* enum osd_additional_sense_codes */
+	union { /* Sense specific information */
+		u16 sense_info;
+		u16 cdb_field_offset; 	/* scsi_invalid_field_in_cdb */
+	};
+	union { /* Command specific information */
+		u64 command_info;
+	};
+
+	u32 not_initiated_command_functions; /* osd_command_functions_bits */
+	u32 completed_command_functions; /* osd_command_functions_bits */
+	struct osd_obj_id obj;
+	struct osd_attr attr;
+};
+
+int osd_req_decode_sense_full(struct osd_request *or,
+	struct osd_sense_info *osi, bool silent,
+	struct osd_obj_id *bad_obj_list, int max_obj,
+	struct osd_attr *bad_attr_list, int max_attr);
+
+static inline int osd_req_decode_sense(struct osd_request *or,
+	struct osd_sense_info *osi)
+{
+	return osd_req_decode_sense_full(or, osi, false, NULL, 0, NULL, 0);
+}
+
+/**
+ * osd_end_request - return osd_request to free store
+ *
+ * @or:		osd_request to free
+ *
+ * Deallocate all osd_request resources (struct req's, BIOs, buffers, etc.)
+ */
+void osd_end_request(struct osd_request *or);
+
+/*
+ * CDB Encoding
+ *
+ * Note: call only one of the following methods.
+ */
+
+/*
+ * Device commands
+ */
+void osd_req_set_master_seed_xchg(struct osd_request *or, ...);/* NI */
+void osd_req_set_master_key(struct osd_request *or, ...);/* NI */
+
+void osd_req_format(struct osd_request *or, u64 tot_capacity);
+
+/* list all partitions
+ * @list header must be initialized to zero on first run.
+ *
+ * Call osd_is_obj_list_done() to find if we got the complete list.
+ */
+int osd_req_list_dev_partitions(struct osd_request *or,
+	osd_id initial_id, struct osd_obj_id_list *list, unsigned nelem);
+
+void osd_req_flush_obsd(struct osd_request *or,
+	enum osd_options_flush_scope_values);
+
+void osd_req_perform_scsi_command(struct osd_request *or,
+	const u8 *cdb, ...);/* NI */
+void osd_req_task_management(struct osd_request *or, ...);/* NI */
+
+/*
+ * Partition commands
+ */
+void osd_req_create_partition(struct osd_request *or, osd_id partition);
+void osd_req_remove_partition(struct osd_request *or, osd_id partition);
+
+void osd_req_set_partition_key(struct osd_request *or,
+	osd_id partition, u8 new_key_id[OSD_CRYPTO_KEYID_SIZE],
+	u8 seed[OSD_CRYPTO_SEED_SIZE]);/* NI */
+
+/* list all collections in the partition
+ * @list header must be init to zero on first run.
+ *
+ * Call osd_is_obj_list_done() to find if we got the complete list.
+ */
+int osd_req_list_partition_collections(struct osd_request *or,
+	osd_id partition, osd_id initial_id, struct osd_obj_id_list *list,
+	unsigned nelem);
+
+/* list all objects in the partition
+ * @list header must be init to zero on first run.
+ *
+ * Call osd_is_obj_list_done() to find if we got the complete list.
+ */
+int osd_req_list_partition_objects(struct osd_request *or,
+	osd_id partition, osd_id initial_id, struct osd_obj_id_list *list,
+	unsigned nelem);
+
+void osd_req_flush_partition(struct osd_request *or,
+	osd_id partition, enum osd_options_flush_scope_values);
+
+/*
+ * Collection commands
+ */
+void osd_req_create_collection(struct osd_request *or,
+	const struct osd_obj_id *);/* NI */
+void osd_req_remove_collection(struct osd_request *or,
+	const struct osd_obj_id *);/* NI */
+
+/* list all objects in the collection */
+int osd_req_list_collection_objects(struct osd_request *or,
+	const struct osd_obj_id *, osd_id initial_id,
+	struct osd_obj_id_list *list, unsigned nelem);
+
+/* V2 only filtered list of objects in the collection */
+void osd_req_query(struct osd_request *or, ...);/* NI */
+
+void osd_req_flush_collection(struct osd_request *or,
+	const struct osd_obj_id *, enum osd_options_flush_scope_values);
+
+void osd_req_get_member_attrs(struct osd_request *or, ...);/* V2-only NI */
+void osd_req_set_member_attrs(struct osd_request *or, ...);/* V2-only NI */
+
+/*
+ * Object commands
+ */
+void osd_req_create_object(struct osd_request *or, struct osd_obj_id *);
+void osd_req_remove_object(struct osd_request *or, struct osd_obj_id *);
+
+void osd_req_write(struct osd_request *or,
+	const struct osd_obj_id *obj, u64 offset, struct bio *bio, u64 len);
+int osd_req_write_kern(struct osd_request *or,
+	const struct osd_obj_id *obj, u64 offset, void *buff, u64 len);
+void osd_req_append(struct osd_request *or,
+	const struct osd_obj_id *, struct bio *data_out);/* NI */
+void osd_req_create_write(struct osd_request *or,
+	const struct osd_obj_id *, struct bio *data_out, u64 offset);/* NI */
+void osd_req_clear(struct osd_request *or,
+	const struct osd_obj_id *, u64 offset, u64 len);/* NI */
+void osd_req_punch(struct osd_request *or,
+	const struct osd_obj_id *, u64 offset, u64 len);/* V2-only NI */
+
+void osd_req_flush_object(struct osd_request *or,
+	const struct osd_obj_id *, enum osd_options_flush_scope_values,
+	/*V2*/ u64 offset, /*V2*/ u64 len);
+
+void osd_req_read(struct osd_request *or,
+	const struct osd_obj_id *obj, u64 offset, struct bio *bio, u64 len);
+int osd_req_read_kern(struct osd_request *or,
+	const struct osd_obj_id *obj, u64 offset, void *buff, u64 len);
+
+/* Scatter/Gather write/read commands */
+int osd_req_write_sg(struct osd_request *or,
+	const struct osd_obj_id *obj, struct bio *bio,
+	const struct osd_sg_entry *sglist, unsigned numentries);
+int osd_req_read_sg(struct osd_request *or,
+	const struct osd_obj_id *obj, struct bio *bio,
+	const struct osd_sg_entry *sglist, unsigned numentries);
+int osd_req_write_sg_kern(struct osd_request *or,
+	const struct osd_obj_id *obj, void **buff,
+	const struct osd_sg_entry *sglist, unsigned numentries);
+int osd_req_read_sg_kern(struct osd_request *or,
+	const struct osd_obj_id *obj, void **buff,
+	const struct osd_sg_entry *sglist, unsigned numentries);
+
+/*
+ * Root/Partition/Collection/Object Attributes commands
+ */
+
+/* get before set */
+void osd_req_get_attributes(struct osd_request *or, const struct osd_obj_id *);
+
+/* set before get */
+void osd_req_set_attributes(struct osd_request *or, const struct osd_obj_id *);
+
+/*
+ * Attributes appended to most commands
+ */
+
+/* Attributes List mode (or V2 CDB) */
+  /*
+   * TODO: In ver2 if at finalize time only one attr was set and no gets,
+   * then the Attributes CDB mode is used automatically to save IO.
+   */
+
+/* set a list of attributes. */
+int osd_req_add_set_attr_list(struct osd_request *or,
+	const struct osd_attr *, unsigned nelem);
+
+/* get a list of attributes */
+int osd_req_add_get_attr_list(struct osd_request *or,
+	const struct osd_attr *, unsigned nelem);
+
+/*
+ * Attributes list decoding
+ * Must be called after osd_request.request was executed
+ * It is called in a loop to decode the returned get_attr
+ * (see osd_add_get_attr)
+ */
+int osd_req_decode_get_attr_list(struct osd_request *or,
+	struct osd_attr *, int *nelem, void **iterator);
+
+/* Attributes Page mode */
+
+/*
+ * Read an attribute page and optionally set one attribute
+ *
+ * Retrieves the attribute page directly to a user buffer.
+ * @attr_page_data shall stay valid until end of execution.
+ * See osd_attributes.h for common page structures
+ */
+int osd_req_add_get_attr_page(struct osd_request *or,
+	u32 page_id, void *attr_page_data, unsigned max_page_len,
+	const struct osd_attr *set_one);
+
+#endif /* __OSD_LIB_H__ */
diff --git a/include/scsi/osd_ore.h b/include/scsi/osd_ore.h
new file mode 100644
index 00000000..a5f9b960
--- /dev/null
+++ b/include/scsi/osd_ore.h
@@ -0,0 +1,200 @@
+/*
+ * Copyright (C) 2011
+ * Boaz Harrosh <bharrosh@panasas.com>
+ *
+ * Public Declarations of the ORE API
+ *
+ * This file is part of the ORE (Object Raid Engine) library.
+ *
+ * ORE is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation. (GPL v2)
+ *
+ * ORE is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the ORE; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#ifndef __ORE_H__
+#define __ORE_H__
+
+#include <scsi/osd_initiator.h>
+#include <scsi/osd_attributes.h>
+#include <scsi/osd_sec.h>
+#include <linux/pnfs_osd_xdr.h>
+#include <linux/bug.h>
+
+struct ore_comp {
+	struct osd_obj_id	obj;
+	u8			cred[OSD_CAP_LEN];
+};
+
+struct ore_layout {
+	/* Our way of looking at the data_map */
+	enum pnfs_osd_raid_algorithm4
+		 raid_algorithm;
+	unsigned stripe_unit;
+	unsigned mirrors_p1;
+
+	unsigned group_width;
+	unsigned parity;
+	u64	 group_depth;
+	unsigned group_count;
+
+	/* Cached often needed calculations filled in by
+	 * ore_verify_layout
+	 */
+	unsigned long max_io_length;	/* Max length that should be passed to
+					 * ore_get_rw_state
+					 */
+};
+
+struct ore_dev {
+	struct osd_dev *od;
+};
+
+struct ore_components {
+	unsigned	first_dev;		/* First logical device no    */
+	unsigned	numdevs;		/* Num of devices in array    */
+	/* If @single_comp == EC_SINGLE_COMP, @comps points to a single
+	 * component. else there are @numdevs components
+	 */
+	enum EC_COMP_USAGE {
+		EC_SINGLE_COMP = 0, EC_MULTPLE_COMPS = 0xffffffff
+	}		single_comp;
+	struct ore_comp	*comps;
+
+	/* Array of pointers to ore_dev-* . User will usually have these pointed
+	 * too a bigger struct which contain an "ore_dev ored" member and use
+	 * container_of(oc->ods[i], struct foo_dev, ored) to access the bigger
+	 * structure.
+	 */
+	struct ore_dev	**ods;
+};
+
+/* ore_comp_dev Recievies a logical device index */
+static inline struct osd_dev *ore_comp_dev(
+	const struct ore_components *oc, unsigned i)
+{
+	BUG_ON((i < oc->first_dev) || (oc->first_dev + oc->numdevs <= i));
+	return oc->ods[i - oc->first_dev]->od;
+}
+
+static inline void ore_comp_set_dev(
+	struct ore_components *oc, unsigned i, struct osd_dev *od)
+{
+	oc->ods[i - oc->first_dev]->od = od;
+}
+
+struct ore_striping_info {
+	u64 offset;
+	u64 obj_offset;
+	u64 length;
+	u64 first_stripe_start; /* only used in raid writes */
+	u64 M; /* for truncate */
+	unsigned bytes_in_stripe;
+	unsigned dev;
+	unsigned par_dev;
+	unsigned unit_off;
+	unsigned cur_pg;
+	unsigned cur_comp;
+};
+
+struct ore_io_state;
+typedef void (*ore_io_done_fn)(struct ore_io_state *ios, void *private);
+struct _ore_r4w_op {
+	/* @Priv given here is passed ios->private */
+	struct page * (*get_page)(void *priv, u64 page_index, bool *uptodate);
+	void (*put_page)(void *priv, struct page *page);
+};
+
+struct ore_io_state {
+	struct kref		kref;
+	struct ore_striping_info si;
+
+	void			*private;
+	ore_io_done_fn	done;
+
+	struct ore_layout	*layout;
+	struct ore_components	*oc;
+
+	/* Global read/write IO*/
+	loff_t			offset;
+	unsigned long		length;
+	void			*kern_buff;
+
+	struct page		**pages;
+	unsigned		nr_pages;
+	unsigned		pgbase;
+	unsigned		pages_consumed;
+
+	/* Attributes */
+	unsigned		in_attr_len;
+	struct osd_attr		*in_attr;
+	unsigned		out_attr_len;
+	struct osd_attr		*out_attr;
+
+	bool			reading;
+
+	/* House keeping of Parity pages */
+	bool			extra_part_alloc;
+	struct page		**parity_pages;
+	unsigned		max_par_pages;
+	unsigned		cur_par_page;
+	unsigned		sgs_per_dev;
+	struct __stripe_pages_2d *sp2d;
+	struct ore_io_state	 *ios_read_4_write;
+	const struct _ore_r4w_op *r4w;
+
+	/* Variable array of size numdevs */
+	unsigned numdevs;
+	struct ore_per_dev_state {
+		struct osd_request *or;
+		struct bio *bio;
+		loff_t offset;
+		unsigned length;
+		unsigned last_sgs_total;
+		unsigned dev;
+		struct osd_sg_entry *sglist;
+		unsigned cur_sg;
+	} per_dev[];
+};
+
+static inline unsigned ore_io_state_size(unsigned numdevs)
+{
+	return sizeof(struct ore_io_state) +
+		sizeof(struct ore_per_dev_state) * numdevs;
+}
+
+/* ore.c */
+int ore_verify_layout(unsigned total_comps, struct ore_layout *layout);
+void ore_calc_stripe_info(struct ore_layout *layout, u64 file_offset,
+			  u64 length, struct ore_striping_info *si);
+int ore_get_rw_state(struct ore_layout *layout, struct ore_components *comps,
+		     bool is_reading, u64 offset, u64 length,
+		     struct ore_io_state **ios);
+int ore_get_io_state(struct ore_layout *layout, struct ore_components *comps,
+		     struct ore_io_state **ios);
+void ore_put_io_state(struct ore_io_state *ios);
+
+typedef void (*ore_on_dev_error)(struct ore_io_state *ios, struct ore_dev *od,
+	unsigned dev_index, enum osd_err_priority oep,
+	u64 dev_offset, u64  dev_len);
+int ore_check_io(struct ore_io_state *ios, ore_on_dev_error rep);
+
+int ore_create(struct ore_io_state *ios);
+int ore_remove(struct ore_io_state *ios);
+int ore_write(struct ore_io_state *ios);
+int ore_read(struct ore_io_state *ios);
+int ore_truncate(struct ore_layout *layout, struct ore_components *comps,
+		 u64 size);
+
+int extract_attr_from_ios(struct ore_io_state *ios, struct osd_attr *attr);
+
+extern const struct osd_attr g_attr_logical_length;
+
+#endif
diff --git a/include/scsi/osd_protocol.h b/include/scsi/osd_protocol.h
new file mode 100644
index 00000000..a6026da2
--- /dev/null
+++ b/include/scsi/osd_protocol.h
@@ -0,0 +1,676 @@
+/*
+ * osd_protocol.h - OSD T10 standard C definitions.
+ *
+ * Copyright (C) 2008 Panasas Inc.  All rights reserved.
+ *
+ * Authors:
+ *   Boaz Harrosh <bharrosh@panasas.com>
+ *   Benny Halevy <bhalevy@panasas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ *
+ * This file contains types and constants that are defined by the protocol
+ * Note: All names and symbols are taken from the OSD standard's text.
+ */
+#ifndef __OSD_PROTOCOL_H__
+#define __OSD_PROTOCOL_H__
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <asm/unaligned.h>
+#include <scsi/scsi.h>
+
+enum {
+	OSDv1_ADDITIONAL_CDB_LENGTH = 192,
+	OSDv1_TOTAL_CDB_LEN = OSDv1_ADDITIONAL_CDB_LENGTH + 8,
+	OSDv1_CAP_LEN = 80,
+
+	/* Latest supported version */
+	OSDv2_ADDITIONAL_CDB_LENGTH = 228,
+	OSD_ADDITIONAL_CDB_LENGTH =
+		OSDv2_ADDITIONAL_CDB_LENGTH,
+	OSD_TOTAL_CDB_LEN = OSD_ADDITIONAL_CDB_LENGTH + 8,
+	OSD_CAP_LEN = 104,
+
+	OSD_SYSTEMID_LEN = 20,
+	OSDv1_CRYPTO_KEYID_SIZE = 20,
+	OSDv2_CRYPTO_KEYID_SIZE = 32,
+	OSD_CRYPTO_KEYID_SIZE = OSDv2_CRYPTO_KEYID_SIZE,
+	OSD_CRYPTO_SEED_SIZE = 4,
+	OSD_CRYPTO_NONCE_SIZE = 12,
+	OSD_MAX_SENSE_LEN = 252, /* from SPC-3 */
+
+	OSD_PARTITION_FIRST_ID = 0x10000,
+	OSD_OBJECT_FIRST_ID = 0x10000,
+};
+
+/* (osd-r10 5.2.4)
+ * osd2r03: 5.2.3 Caching control bits
+ */
+enum osd_options_byte {
+	OSD_CDB_FUA = 0x08,	/* Force Unit Access */
+	OSD_CDB_DPO = 0x10,	/* Disable Page Out */
+};
+
+/*
+ * osd2r03: 5.2.5 Isolation.
+ * First 3 bits, V2-only.
+ * Also for attr 110h "default isolation method" at Root Information page
+ */
+enum osd_options_byte_isolation {
+	OSD_ISOLATION_DEFAULT = 0,
+	OSD_ISOLATION_NONE = 1,
+	OSD_ISOLATION_STRICT = 2,
+	OSD_ISOLATION_RANGE = 4,
+	OSD_ISOLATION_FUNCTIONAL = 5,
+	OSD_ISOLATION_VENDOR = 7,
+};
+
+/* (osd-r10: 6.7)
+ * osd2r03: 6.8 FLUSH, FLUSH COLLECTION, FLUSH OSD, FLUSH PARTITION
+ */
+enum osd_options_flush_scope_values {
+	OSD_CDB_FLUSH_ALL = 0,
+	OSD_CDB_FLUSH_ATTR_ONLY = 1,
+
+	OSD_CDB_FLUSH_ALL_RECURSIVE = 2,
+	/* V2-only */
+	OSD_CDB_FLUSH_ALL_RANGE = 2,
+};
+
+/* osd2r03: 5.2.10 Timestamps control */
+enum {
+	OSD_CDB_NORMAL_TIMESTAMPS = 0,
+	OSD_CDB_BYPASS_TIMESTAMPS = 0x7f,
+};
+
+/* (osd-r10: 5.2.2.1)
+ * osd2r03: 5.2.4.1 Get and set attributes CDB format selection
+ *	2 bits at second nibble of command_specific_options byte
+ */
+enum osd_attributes_mode {
+	/* V2-only */
+	OSD_CDB_SET_ONE_ATTR = 0x10,
+
+	OSD_CDB_GET_ATTR_PAGE_SET_ONE = 0x20,
+	OSD_CDB_GET_SET_ATTR_LISTS = 0x30,
+
+	OSD_CDB_GET_SET_ATTR_MASK = 0x30,
+};
+
+/* (osd-r10: 4.12.5)
+ * osd2r03: 4.14.5 Data-In and Data-Out buffer offsets
+ *	byte offset = mantissa * (2^(exponent+8))
+ *	struct {
+ *		unsigned mantissa: 28;
+ *		int exponent: 04;
+ *	}
+ */
+typedef __be32 __bitwise osd_cdb_offset;
+
+enum {
+	OSD_OFFSET_UNUSED = 0xFFFFFFFF,
+	OSD_OFFSET_MAX_BITS = 28,
+
+	OSDv1_OFFSET_MIN_SHIFT = 8,
+	OSD_OFFSET_MIN_SHIFT = 3,
+	OSD_OFFSET_MAX_SHIFT = 16,
+};
+
+/* Return the smallest allowed encoded offset that contains @offset.
+ *
+ * The actual encoded offset returned is @offset + *padding.
+ * (up to max_shift, non-inclusive)
+ */
+osd_cdb_offset __osd_encode_offset(u64 offset, unsigned *padding,
+	int min_shift, int max_shift);
+
+/* Minimum alignment is 256 bytes
+ * Note: Seems from std v1 that exponent can be from 0+8 to 0xE+8 (inclusive)
+ * which is 8 to 23 but IBM code restricts it to 16, so be it.
+ */
+static inline osd_cdb_offset osd_encode_offset_v1(u64 offset, unsigned *padding)
+{
+	return __osd_encode_offset(offset, padding,
+				OSDv1_OFFSET_MIN_SHIFT, OSD_OFFSET_MAX_SHIFT);
+}
+
+/* Minimum 8 bytes alignment
+ * Same as v1 but since exponent can be signed than a less than
+ * 256 alignment can be reached with small offsets (<2GB)
+ */
+static inline osd_cdb_offset osd_encode_offset_v2(u64 offset, unsigned *padding)
+{
+	return __osd_encode_offset(offset, padding,
+				   OSD_OFFSET_MIN_SHIFT, OSD_OFFSET_MAX_SHIFT);
+}
+
+/* osd2r03: 5.2.1 Overview */
+struct osd_cdb_head {
+	struct scsi_varlen_cdb_hdr varlen_cdb;
+/*10*/	u8		options;
+	u8		command_specific_options;
+	u8		timestamp_control;
+/*13*/	u8		reserved1[3];
+/*16*/	__be64		partition;
+/*24*/	__be64		object;
+/*32*/	union { /* V1 vs V2 alignment differences */
+		struct __osdv1_cdb_addr_len {
+/*32*/			__be32 		list_identifier;/* Rarely used */
+/*36*/			__be64		length;
+/*44*/			__be64		start_address;
+		} __packed v1;
+
+		struct __osdv2_cdb_addr_len {
+			/* called allocation_length in some commands */
+/*32*/			__be64	length;
+/*40*/			__be64	start_address;
+			union {
+/*48*/				__be32 list_identifier;/* Rarely used */
+				/* OSD2r05 5.2.5 CDB continuation length */
+/*48*/				__be32 cdb_continuation_length;
+			};
+		} __packed v2;
+	};
+/*52*/	union { /* selected attributes mode Page/List/Single */
+		struct osd_attributes_page_mode {
+/*52*/			__be32		get_attr_page;
+/*56*/			__be32		get_attr_alloc_length;
+/*60*/			osd_cdb_offset	get_attr_offset;
+
+/*64*/			__be32		set_attr_page;
+/*68*/			__be32		set_attr_id;
+/*72*/			__be32		set_attr_length;
+/*76*/			osd_cdb_offset	set_attr_offset;
+/*80*/		} __packed attrs_page;
+
+		struct osd_attributes_list_mode {
+/*52*/			__be32		get_attr_desc_bytes;
+/*56*/			osd_cdb_offset	get_attr_desc_offset;
+
+/*60*/			__be32		get_attr_alloc_length;
+/*64*/			osd_cdb_offset	get_attr_offset;
+
+/*68*/			__be32		set_attr_bytes;
+/*72*/			osd_cdb_offset	set_attr_offset;
+			__be32 not_used;
+/*80*/		} __packed attrs_list;
+
+		/* osd2r03:5.2.4.2 Set one attribute value using CDB fields */
+		struct osd_attributes_cdb_mode {
+/*52*/			__be32		set_attr_page;
+/*56*/			__be32		set_attr_id;
+/*60*/			__be16		set_attr_len;
+/*62*/			u8		set_attr_val[18];
+/*80*/		} __packed attrs_cdb;
+/*52*/		u8 get_set_attributes_parameters[28];
+	};
+} __packed;
+/*80*/
+
+/*160 v1*/
+struct osdv1_security_parameters {
+/*160*/u8	integrity_check_value[OSDv1_CRYPTO_KEYID_SIZE];
+/*180*/u8	request_nonce[OSD_CRYPTO_NONCE_SIZE];
+/*192*/osd_cdb_offset	data_in_integrity_check_offset;
+/*196*/osd_cdb_offset	data_out_integrity_check_offset;
+} __packed;
+/*200 v1*/
+
+/*184 v2*/
+struct osdv2_security_parameters {
+/*184*/u8	integrity_check_value[OSDv2_CRYPTO_KEYID_SIZE];
+/*216*/u8	request_nonce[OSD_CRYPTO_NONCE_SIZE];
+/*228*/osd_cdb_offset	data_in_integrity_check_offset;
+/*232*/osd_cdb_offset	data_out_integrity_check_offset;
+} __packed;
+/*236 v2*/
+
+struct osd_security_parameters {
+	union {
+		struct osdv1_security_parameters v1;
+		struct osdv2_security_parameters v2;
+	};
+};
+
+struct osdv1_cdb {
+	struct osd_cdb_head h;
+	u8 caps[OSDv1_CAP_LEN];
+	struct osdv1_security_parameters sec_params;
+} __packed;
+
+struct osdv2_cdb {
+	struct osd_cdb_head h;
+	u8 caps[OSD_CAP_LEN];
+	struct osdv2_security_parameters sec_params;
+} __packed;
+
+struct osd_cdb {
+	union {
+		struct osdv1_cdb v1;
+		struct osdv2_cdb v2;
+		u8 buff[OSD_TOTAL_CDB_LEN];
+	};
+} __packed;
+
+static inline struct osd_cdb_head *osd_cdb_head(struct osd_cdb *ocdb)
+{
+	return (struct osd_cdb_head *)ocdb->buff;
+}
+
+/* define both version actions
+ * Ex name = FORMAT_OSD we have OSD_ACT_FORMAT_OSD && OSDv1_ACT_FORMAT_OSD
+ */
+#define OSD_ACT___(Name, Num) \
+	OSD_ACT_##Name = __constant_cpu_to_be16(0x8880 + Num), \
+	OSDv1_ACT_##Name = __constant_cpu_to_be16(0x8800 + Num),
+
+/* V2 only actions */
+#define OSD_ACT_V2(Name, Num) \
+	OSD_ACT_##Name = __constant_cpu_to_be16(0x8880 + Num),
+
+#define OSD_ACT_V1_V2(Name, Num1, Num2) \
+	OSD_ACT_##Name = __constant_cpu_to_be16(Num2), \
+	OSDv1_ACT_##Name = __constant_cpu_to_be16(Num1),
+
+enum osd_service_actions {
+	OSD_ACT_V2(OBJECT_STRUCTURE_CHECK,	0x00)
+	OSD_ACT___(FORMAT_OSD,			0x01)
+	OSD_ACT___(CREATE,			0x02)
+	OSD_ACT___(LIST,			0x03)
+	OSD_ACT_V2(PUNCH,			0x04)
+	OSD_ACT___(READ,			0x05)
+	OSD_ACT___(WRITE,			0x06)
+	OSD_ACT___(APPEND,			0x07)
+	OSD_ACT___(FLUSH,			0x08)
+	OSD_ACT_V2(CLEAR,			0x09)
+	OSD_ACT___(REMOVE,			0x0A)
+	OSD_ACT___(CREATE_PARTITION,		0x0B)
+	OSD_ACT___(REMOVE_PARTITION,		0x0C)
+	OSD_ACT___(GET_ATTRIBUTES,		0x0E)
+	OSD_ACT___(SET_ATTRIBUTES,		0x0F)
+	OSD_ACT___(CREATE_AND_WRITE,		0x12)
+	OSD_ACT___(CREATE_COLLECTION,		0x15)
+	OSD_ACT___(REMOVE_COLLECTION,		0x16)
+	OSD_ACT___(LIST_COLLECTION,		0x17)
+	OSD_ACT___(SET_KEY,			0x18)
+	OSD_ACT___(SET_MASTER_KEY,		0x19)
+	OSD_ACT___(FLUSH_COLLECTION,		0x1A)
+	OSD_ACT___(FLUSH_PARTITION,		0x1B)
+	OSD_ACT___(FLUSH_OSD,			0x1C)
+
+	OSD_ACT_V2(QUERY,			0x20)
+	OSD_ACT_V2(REMOVE_MEMBER_OBJECTS,	0x21)
+	OSD_ACT_V2(GET_MEMBER_ATTRIBUTES,	0x22)
+	OSD_ACT_V2(SET_MEMBER_ATTRIBUTES,	0x23)
+
+	OSD_ACT_V2(CREATE_CLONE,		0x28)
+	OSD_ACT_V2(CREATE_SNAPSHOT,		0x29)
+	OSD_ACT_V2(DETACH_CLONE,		0x2A)
+	OSD_ACT_V2(REFRESH_SNAPSHOT_CLONE,	0x2B)
+	OSD_ACT_V2(RESTORE_PARTITION_FROM_SNAPSHOT, 0x2C)
+
+	OSD_ACT_V2(READ_MAP,			0x31)
+	OSD_ACT_V2(READ_MAPS_COMPARE,		0x32)
+
+	OSD_ACT_V1_V2(PERFORM_SCSI_COMMAND,	0x8F7E, 0x8F7C)
+	OSD_ACT_V1_V2(SCSI_TASK_MANAGEMENT,	0x8F7F, 0x8F7D)
+	/* 0x8F80 to 0x8FFF are Vendor specific */
+};
+
+/* osd2r03: 7.1.3.2 List entry format for retrieving attributes */
+struct osd_attributes_list_attrid {
+	__be32 attr_page;
+	__be32 attr_id;
+} __packed;
+
+/*
+ * NOTE: v1: is not aligned.
+ */
+struct osdv1_attributes_list_element {
+	__be32 attr_page;
+	__be32 attr_id;
+	__be16 attr_bytes; /* valid bytes at attr_val without padding */
+	u8 attr_val[0];
+} __packed;
+
+/*
+ * osd2r03: 7.1.3.3 List entry format for retrieved attributes and
+ *                  for setting attributes
+ * NOTE: v2 is 8-bytes aligned
+ */
+struct osdv2_attributes_list_element {
+	__be32 attr_page;
+	__be32 attr_id;
+	u8 reserved[6];
+	__be16 attr_bytes; /* valid bytes at attr_val without padding */
+	u8 attr_val[0];
+} __packed;
+
+enum {
+	OSDv1_ATTRIBUTES_ELEM_ALIGN = 1,
+	OSD_ATTRIBUTES_ELEM_ALIGN = 8,
+};
+
+enum {
+	OSD_ATTR_LIST_ALL_PAGES = 0xFFFFFFFF,
+	OSD_ATTR_LIST_ALL_IN_PAGE = 0xFFFFFFFF,
+};
+
+static inline unsigned osdv1_attr_list_elem_size(unsigned len)
+{
+	return ALIGN(len + sizeof(struct osdv1_attributes_list_element),
+		     OSDv1_ATTRIBUTES_ELEM_ALIGN);
+}
+
+static inline unsigned osdv2_attr_list_elem_size(unsigned len)
+{
+	return ALIGN(len + sizeof(struct osdv2_attributes_list_element),
+		     OSD_ATTRIBUTES_ELEM_ALIGN);
+}
+
+/*
+ * osd2r03: 7.1.3 OSD attributes lists (Table 184) — List type values
+ */
+enum osd_attr_list_types {
+	OSD_ATTR_LIST_GET = 0x1, 	/* descriptors only */
+	OSD_ATTR_LIST_SET_RETRIEVE = 0x9, /*descriptors/values variable-length*/
+	OSD_V2_ATTR_LIST_MULTIPLE = 0xE,  /* ver2, Multiple Objects lists*/
+	OSD_V1_ATTR_LIST_CREATE_MULTIPLE = 0xF,/*ver1, used by create_multple*/
+};
+
+/* osd2r03: 7.1.3.4 Multi-object retrieved attributes format */
+struct osd_attributes_list_multi_header {
+	__be64 object_id;
+	u8 object_type; /* object_type enum below */
+	u8 reserved[5];
+	__be16 list_bytes;
+	/* followed by struct osd_attributes_list_element's */
+};
+
+struct osdv1_attributes_list_header {
+	u8 type;	/* low 4-bit only */
+	u8 pad;
+	__be16 list_bytes; /* Initiator shall set to Zero. Only set by target */
+	/*
+	 * type=9 followed by struct osd_attributes_list_element's
+	 * type=E followed by struct osd_attributes_list_multi_header's
+	 */
+} __packed;
+
+static inline unsigned osdv1_list_size(struct osdv1_attributes_list_header *h)
+{
+	return be16_to_cpu(h->list_bytes);
+}
+
+struct osdv2_attributes_list_header {
+	u8 type;	/* lower 4-bits only */
+	u8 pad[3];
+/*4*/	__be32 list_bytes; /* Initiator shall set to zero. Only set by target */
+	/*
+	 * type=9 followed by struct osd_attributes_list_element's
+	 * type=E followed by struct osd_attributes_list_multi_header's
+	 */
+} __packed;
+
+static inline unsigned osdv2_list_size(struct osdv2_attributes_list_header *h)
+{
+	return be32_to_cpu(h->list_bytes);
+}
+
+/* (osd-r10 6.13)
+ * osd2r03: 6.15 LIST (Table 79) LIST command parameter data.
+ *	for root_lstchg below
+ */
+enum {
+	OSD_OBJ_ID_LIST_PAR = 0x1, /* V1-only. Not used in V2 */
+	OSD_OBJ_ID_LIST_LSTCHG = 0x2,
+};
+
+/*
+ * osd2r03: 6.15.2 LIST command parameter data
+ * (Also for LIST COLLECTION)
+ */
+struct osd_obj_id_list {
+	__be64 list_bytes; /* bytes in list excluding list_bytes (-8) */
+	__be64 continuation_id;
+	__be32 list_identifier;
+	u8 pad[3];
+	u8 root_lstchg;
+	__be64 object_ids[0];
+} __packed;
+
+static inline bool osd_is_obj_list_done(struct osd_obj_id_list *list,
+	bool *is_changed)
+{
+	*is_changed = (0 != (list->root_lstchg & OSD_OBJ_ID_LIST_LSTCHG));
+	return 0 != list->continuation_id;
+}
+
+/*
+ * osd2r03: 4.12.4.5 The ALLDATA security method
+ */
+struct osd_data_out_integrity_info {
+	__be64 data_bytes;
+	__be64 set_attributes_bytes;
+	__be64 get_attributes_bytes;
+	__u8 integrity_check_value[OSD_CRYPTO_KEYID_SIZE];
+} __packed;
+
+/* Same osd_data_out_integrity_info is used for OSD2/OSD1. The only difference
+ * Is the sizeof the structure since in OSD1 the last array is smaller. Use
+ * below for version independent handling of this structure
+ */
+static inline int osd_data_out_integrity_info_sizeof(bool is_ver1)
+{
+	return sizeof(struct osd_data_out_integrity_info) -
+		(is_ver1 * (OSDv2_CRYPTO_KEYID_SIZE - OSDv1_CRYPTO_KEYID_SIZE));
+}
+
+struct osd_data_in_integrity_info {
+	__be64 data_bytes;
+	__be64 retrieved_attributes_bytes;
+	__u8 integrity_check_value[OSD_CRYPTO_KEYID_SIZE];
+} __packed;
+
+/* Same osd_data_in_integrity_info is used for OSD2/OSD1. The only difference
+ * Is the sizeof the structure since in OSD1 the last array is smaller. Use
+ * below for version independent handling of this structure
+ */
+static inline int osd_data_in_integrity_info_sizeof(bool is_ver1)
+{
+	return sizeof(struct osd_data_in_integrity_info) -
+		(is_ver1 * (OSDv2_CRYPTO_KEYID_SIZE - OSDv1_CRYPTO_KEYID_SIZE));
+}
+
+struct osd_timestamp {
+	u8 time[6]; /* number of milliseconds since 1/1/1970 UT (big endian) */
+} __packed;
+/* FIXME: define helper functions to convert to/from osd time format */
+
+/*
+ * Capability & Security definitions
+ * osd2r03: 4.11.2.2 Capability format
+ * osd2r03: 5.2.8 Security parameters
+ */
+
+struct osd_key_identifier {
+	u8 id[7]; /* if you know why 7 please email bharrosh@panasas.com */
+} __packed;
+
+/* for osd_capability.format */
+enum {
+	OSD_SEC_CAP_FORMAT_NO_CAPS = 0,
+	OSD_SEC_CAP_FORMAT_VER1 = 1,
+	OSD_SEC_CAP_FORMAT_VER2 = 2,
+};
+
+/* security_method */
+enum {
+	OSD_SEC_NOSEC = 0,
+	OSD_SEC_CAPKEY = 1,
+	OSD_SEC_CMDRSP = 2,
+	OSD_SEC_ALLDATA = 3,
+};
+
+enum object_type {
+	OSD_SEC_OBJ_ROOT = 0x1,
+	OSD_SEC_OBJ_PARTITION = 0x2,
+	OSD_SEC_OBJ_COLLECTION = 0x40,
+	OSD_SEC_OBJ_USER = 0x80,
+};
+
+enum osd_capability_bit_masks {
+	OSD_SEC_CAP_APPEND	= BIT(0),
+	OSD_SEC_CAP_OBJ_MGMT	= BIT(1),
+	OSD_SEC_CAP_REMOVE	= BIT(2),
+	OSD_SEC_CAP_CREATE	= BIT(3),
+	OSD_SEC_CAP_SET_ATTR	= BIT(4),
+	OSD_SEC_CAP_GET_ATTR	= BIT(5),
+	OSD_SEC_CAP_WRITE	= BIT(6),
+	OSD_SEC_CAP_READ	= BIT(7),
+
+	OSD_SEC_CAP_NONE1	= BIT(8),
+	OSD_SEC_CAP_NONE2	= BIT(9),
+	OSD_SEC_GBL_REM 	= BIT(10), /*v2 only*/
+	OSD_SEC_CAP_QUERY	= BIT(11), /*v2 only*/
+	OSD_SEC_CAP_M_OBJECT	= BIT(12), /*v2 only*/
+	OSD_SEC_CAP_POL_SEC	= BIT(13),
+	OSD_SEC_CAP_GLOBAL	= BIT(14),
+	OSD_SEC_CAP_DEV_MGMT	= BIT(15),
+};
+
+/* for object_descriptor_type (hi nibble used) */
+enum {
+	OSD_SEC_OBJ_DESC_NONE = 0,     /* Not allowed */
+	OSD_SEC_OBJ_DESC_OBJ = 1 << 4, /* v1: also collection */
+	OSD_SEC_OBJ_DESC_PAR = 2 << 4, /* also root */
+	OSD_SEC_OBJ_DESC_COL = 3 << 4, /* v2 only */
+};
+
+/* (osd-r10:4.9.2.2)
+ * osd2r03:4.11.2.2 Capability format
+ */
+struct osd_capability_head {
+	u8 format; /* low nibble */
+	u8 integrity_algorithm__key_version; /* MAKE_BYTE(integ_alg, key_ver) */
+	u8 security_method;
+	u8 reserved1;
+/*04*/	struct osd_timestamp expiration_time;
+/*10*/	u8 audit[20];
+/*30*/	u8 discriminator[12];
+/*42*/	struct osd_timestamp object_created_time;
+/*48*/	u8 object_type;
+/*49*/	u8 permissions_bit_mask[5];
+/*54*/	u8 reserved2;
+/*55*/	u8 object_descriptor_type; /* high nibble */
+} __packed;
+
+/*56 v1*/
+struct osdv1_cap_object_descriptor {
+	union {
+		struct {
+/*56*/			__be32 policy_access_tag;
+/*60*/			__be64 allowed_partition_id;
+/*68*/			__be64 allowed_object_id;
+/*76*/			__be32 reserved;
+		} __packed obj_desc;
+
+/*56*/		u8 object_descriptor[24];
+	};
+} __packed;
+/*80 v1*/
+
+/*56 v2*/
+struct osd_cap_object_descriptor {
+	union {
+		struct {
+/*56*/			__be32 allowed_attributes_access;
+/*60*/			__be32 policy_access_tag;
+/*64*/			__be16 boot_epoch;
+/*66*/			u8 reserved[6];
+/*72*/			__be64 allowed_partition_id;
+/*80*/			__be64 allowed_object_id;
+/*88*/			__be64 allowed_range_length;
+/*96*/			__be64 allowed_range_start;
+		} __packed obj_desc;
+
+/*56*/		u8 object_descriptor[48];
+	};
+} __packed;
+/*104 v2*/
+
+struct osdv1_capability {
+	struct osd_capability_head h;
+	struct osdv1_cap_object_descriptor od;
+} __packed;
+
+struct osd_capability {
+	struct osd_capability_head h;
+	struct osd_cap_object_descriptor od;
+} __packed;
+
+/**
+ * osd_sec_set_caps - set cap-bits into the capabilities header
+ *
+ * @cap:	The osd_capability_head to set cap bits to.
+ * @bit_mask: 	Use an ORed list of enum osd_capability_bit_masks values
+ *
+ * permissions_bit_mask is unaligned use below to set into caps
+ * in a version independent way
+ */
+static inline void osd_sec_set_caps(struct osd_capability_head *cap,
+	u16 bit_mask)
+{
+	/*
+	 *Note: The bits above are defined LE order this is because this way
+	 *      they can grow in the future to more then 16, and still retain
+	 *      there constant values.
+	 */
+	put_unaligned_le16(bit_mask, &cap->permissions_bit_mask);
+}
+
+/* osd2r05a sec 5.3: CDB continuation segment formats */
+enum osd_continuation_segment_format {
+	CDB_CONTINUATION_FORMAT_V2 = 0x01,
+};
+
+struct osd_continuation_segment_header {
+	u8	format;
+	u8	reserved1;
+	__be16	service_action;
+	__be32	reserved2;
+	u8	integrity_check[OSDv2_CRYPTO_KEYID_SIZE];
+} __packed;
+
+/* osd2r05a sec 5.4.1: CDB continuation descriptors */
+enum osd_continuation_descriptor_type {
+	NO_MORE_DESCRIPTORS = 0x0000,
+	SCATTER_GATHER_LIST = 0x0001,
+	QUERY_LIST = 0x0002,
+	USER_OBJECT = 0x0003,
+	COPY_USER_OBJECT_SOURCE = 0x0101,
+	EXTENSION_CAPABILITIES = 0xFFEE
+};
+
+struct osd_continuation_descriptor_header {
+	__be16	type;
+	u8	reserved;
+	u8	pad_length;
+	__be32	length;
+} __packed;
+
+
+/* osd2r05a sec 5.4.2: Scatter/gather list */
+struct osd_sg_list_entry {
+	__be64 offset;
+	__be64 len;
+};
+
+struct osd_sg_continuation_descriptor {
+	struct osd_continuation_descriptor_header hdr;
+	struct osd_sg_list_entry entries[];
+};
+
+#endif /* ndef __OSD_PROTOCOL_H__ */
diff --git a/include/scsi/osd_sec.h b/include/scsi/osd_sec.h
new file mode 100644
index 00000000..4c09fee8
--- /dev/null
+++ b/include/scsi/osd_sec.h
@@ -0,0 +1,45 @@
+/*
+ * osd_sec.h - OSD security manager API
+ *
+ * Copyright (C) 2008 Panasas Inc.  All rights reserved.
+ *
+ * Authors:
+ *   Boaz Harrosh <bharrosh@panasas.com>
+ *   Benny Halevy <bhalevy@panasas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ *
+ */
+#ifndef __OSD_SEC_H__
+#define __OSD_SEC_H__
+
+#include "osd_protocol.h"
+#include "osd_types.h"
+
+/*
+ * Contains types and constants of osd capabilities and security
+ * encoding/decoding.
+ * API is trying to keep security abstract so initiator of an object
+ * based pNFS client knows as little as possible about security and
+ * capabilities. It is the Server's osd-initiator place to know more.
+ * Also can be used by osd-target.
+ */
+void osd_sec_encode_caps(void *caps, ...);/* NI */
+void osd_sec_init_nosec_doall_caps(void *caps,
+	const struct osd_obj_id *obj, bool is_collection, const bool is_v1);
+
+bool osd_is_sec_alldata(struct osd_security_parameters *sec_params);
+
+/* Conditionally sign the CDB according to security setting in ocdb
+ * with cap_key */
+void osd_sec_sign_cdb(struct osd_cdb *ocdb, const u8 *cap_key);
+
+/* Unconditionally sign the BIO data with cap_key.
+ * Check for osd_is_sec_alldata() was done prior to calling this. */
+void osd_sec_sign_data(void *data_integ, struct bio *bio, const u8 *cap_key);
+
+/* Version independent copy of caps into the cdb */
+void osd_set_caps(struct osd_cdb *cdb, const void *caps);
+
+#endif /* ndef __OSD_SEC_H__ */
diff --git a/include/scsi/osd_sense.h b/include/scsi/osd_sense.h
new file mode 100644
index 00000000..91db543a
--- /dev/null
+++ b/include/scsi/osd_sense.h
@@ -0,0 +1,263 @@
+/*
+ * osd_sense.h - OSD Related sense handling definitions.
+ *
+ * Copyright (C) 2008 Panasas Inc.  All rights reserved.
+ *
+ * Authors:
+ *   Boaz Harrosh <bharrosh@panasas.com>
+ *   Benny Halevy <bhalevy@panasas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ *
+ * This file contains types and constants that are defined by the protocol
+ * Note: All names and symbols are taken from the OSD standard's text.
+ */
+#ifndef __OSD_SENSE_H__
+#define __OSD_SENSE_H__
+
+#include <scsi/osd_protocol.h>
+
+/* SPC3r23 4.5.6 Sense key and sense code definitions table 27 */
+enum scsi_sense_keys {
+	scsi_sk_no_sense        = 0x0,
+	scsi_sk_recovered_error = 0x1,
+	scsi_sk_not_ready       = 0x2,
+	scsi_sk_medium_error    = 0x3,
+	scsi_sk_hardware_error  = 0x4,
+	scsi_sk_illegal_request = 0x5,
+	scsi_sk_unit_attention  = 0x6,
+	scsi_sk_data_protect    = 0x7,
+	scsi_sk_blank_check     = 0x8,
+	scsi_sk_vendor_specific = 0x9,
+	scsi_sk_copy_aborted    = 0xa,
+	scsi_sk_aborted_command = 0xb,
+	scsi_sk_volume_overflow = 0xd,
+	scsi_sk_miscompare      = 0xe,
+	scsi_sk_reserved        = 0xf,
+};
+
+/* SPC3r23 4.5.6 Sense key and sense code definitions table 28 */
+/* Note: only those which can be returned by an OSD target. Most of
+ *       these errors are taken care of by the generic scsi layer.
+ */
+enum osd_additional_sense_codes {
+	scsi_no_additional_sense_information			= 0x0000,
+	scsi_operation_in_progress				= 0x0016,
+	scsi_cleaning_requested					= 0x0017,
+	scsi_lunr_cause_not_reportable				= 0x0400,
+	scsi_logical_unit_is_in_process_of_becoming_ready	= 0x0401,
+	scsi_lunr_initializing_command_required			= 0x0402,
+	scsi_lunr_manual_intervention_required			= 0x0403,
+	scsi_lunr_operation_in_progress				= 0x0407,
+	scsi_lunr_selftest_in_progress				= 0x0409,
+	scsi_luna_asymmetric_access_state_transition		= 0x040a,
+	scsi_luna_target_port_in_standby_state			= 0x040b,
+	scsi_luna_target_port_in_unavailable_state		= 0x040c,
+	scsi_lunr_notify_enable_spinup_required			= 0x0411,
+	scsi_logical_unit_does_not_respond_to_selection		= 0x0500,
+	scsi_logical_unit_communication_failure			= 0x0800,
+	scsi_logical_unit_communication_timeout			= 0x0801,
+	scsi_logical_unit_communication_parity_error		= 0x0802,
+	scsi_error_log_overflow					= 0x0a00,
+	scsi_warning						= 0x0b00,
+	scsi_warning_specified_temperature_exceeded		= 0x0b01,
+	scsi_warning_enclosure_degraded				= 0x0b02,
+	scsi_write_error_unexpected_unsolicited_data		= 0x0c0c,
+	scsi_write_error_not_enough_unsolicited_data		= 0x0c0d,
+	scsi_invalid_information_unit				= 0x0e00,
+	scsi_invalid_field_in_command_information_unit		= 0x0e03,
+	scsi_read_error_failed_retransmission_request		= 0x1113,
+	scsi_parameter_list_length_error			= 0x1a00,
+	scsi_invalid_command_operation_code			= 0x2000,
+	scsi_invalid_field_in_cdb				= 0x2400,
+	osd_security_audit_value_frozen				= 0x2404,
+	osd_security_working_key_frozen				= 0x2405,
+	osd_nonce_not_unique					= 0x2406,
+	osd_nonce_timestamp_out_of_range			= 0x2407,
+	scsi_logical_unit_not_supported				= 0x2500,
+	scsi_invalid_field_in_parameter_list			= 0x2600,
+	scsi_parameter_not_supported				= 0x2601,
+	scsi_parameter_value_invalid				= 0x2602,
+	scsi_invalid_release_of_persistent_reservation		= 0x2604,
+	osd_invalid_dataout_buffer_integrity_check_value	= 0x260f,
+	scsi_not_ready_to_ready_change_medium_may_have_changed	= 0x2800,
+	scsi_power_on_reset_or_bus_device_reset_occurred	= 0x2900,
+	scsi_power_on_occurred					= 0x2901,
+	scsi_scsi_bus_reset_occurred				= 0x2902,
+	scsi_bus_device_reset_function_occurred			= 0x2903,
+	scsi_device_internal_reset				= 0x2904,
+	scsi_transceiver_mode_changed_to_single_ended		= 0x2905,
+	scsi_transceiver_mode_changed_to_lvd			= 0x2906,
+	scsi_i_t_nexus_loss_occurred				= 0x2907,
+	scsi_parameters_changed					= 0x2a00,
+	scsi_mode_parameters_changed				= 0x2a01,
+	scsi_asymmetric_access_state_changed			= 0x2a06,
+	scsi_priority_changed					= 0x2a08,
+	scsi_command_sequence_error				= 0x2c00,
+	scsi_previous_busy_status				= 0x2c07,
+	scsi_previous_task_set_full_status			= 0x2c08,
+	scsi_previous_reservation_conflict_status		= 0x2c09,
+	osd_partition_or_collection_contains_user_objects	= 0x2c0a,
+	scsi_commands_cleared_by_another_initiator		= 0x2f00,
+	scsi_cleaning_failure					= 0x3007,
+	scsi_enclosure_failure					= 0x3400,
+	scsi_enclosure_services_failure				= 0x3500,
+	scsi_unsupported_enclosure_function			= 0x3501,
+	scsi_enclosure_services_unavailable			= 0x3502,
+	scsi_enclosure_services_transfer_failure		= 0x3503,
+	scsi_enclosure_services_transfer_refused		= 0x3504,
+	scsi_enclosure_services_checksum_error			= 0x3505,
+	scsi_rounded_parameter					= 0x3700,
+	osd_read_past_end_of_user_object			= 0x3b17,
+	scsi_logical_unit_has_not_self_configured_yet		= 0x3e00,
+	scsi_logical_unit_failure				= 0x3e01,
+	scsi_timeout_on_logical_unit				= 0x3e02,
+	scsi_logical_unit_failed_selftest			= 0x3e03,
+	scsi_logical_unit_unable_to_update_selftest_log		= 0x3e04,
+	scsi_target_operating_conditions_have_changed		= 0x3f00,
+	scsi_microcode_has_been_changed				= 0x3f01,
+	scsi_inquiry_data_has_changed				= 0x3f03,
+	scsi_echo_buffer_overwritten				= 0x3f0f,
+	scsi_diagnostic_failure_on_component_nn_first		= 0x4080,
+	scsi_diagnostic_failure_on_component_nn_last		= 0x40ff,
+	scsi_message_error					= 0x4300,
+	scsi_internal_target_failure				= 0x4400,
+	scsi_select_or_reselect_failure				= 0x4500,
+	scsi_scsi_parity_error					= 0x4700,
+	scsi_data_phase_crc_error_detected			= 0x4701,
+	scsi_scsi_parity_error_detected_during_st_data_phase	= 0x4702,
+	scsi_asynchronous_information_protection_error_detected	= 0x4704,
+	scsi_protocol_service_crc_error				= 0x4705,
+	scsi_phy_test_function_in_progress			= 0x4706,
+	scsi_invalid_message_error				= 0x4900,
+	scsi_command_phase_error				= 0x4a00,
+	scsi_data_phase_error					= 0x4b00,
+	scsi_logical_unit_failed_self_configuration		= 0x4c00,
+	scsi_overlapped_commands_attempted			= 0x4e00,
+	osd_quota_error						= 0x5507,
+	scsi_failure_prediction_threshold_exceeded		= 0x5d00,
+	scsi_failure_prediction_threshold_exceeded_false	= 0x5dff,
+	scsi_voltage_fault					= 0x6500,
+};
+
+enum scsi_descriptor_types {
+	scsi_sense_information			= 0x0,
+	scsi_sense_command_specific_information	= 0x1,
+	scsi_sense_key_specific			= 0x2,
+	scsi_sense_field_replaceable_unit	= 0x3,
+	scsi_sense_stream_commands		= 0x4,
+	scsi_sense_block_commands		= 0x5,
+	osd_sense_object_identification		= 0x6,
+	osd_sense_response_integrity_check	= 0x7,
+	osd_sense_attribute_identification	= 0x8,
+	scsi_sense_ata_return			= 0x9,
+
+	scsi_sense_Reserved_first		= 0x0A,
+	scsi_sense_Reserved_last		= 0x7F,
+	scsi_sense_Vendor_specific_first	= 0x80,
+	scsi_sense_Vendor_specific_last		= 0xFF,
+};
+
+struct scsi_sense_descriptor { /* for picking into desc type */
+	u8	descriptor_type; /* one of enum scsi_descriptor_types */
+	u8	additional_length; /* n - 1 */
+	u8	data[];
+} __packed;
+
+/* OSD deploys only scsi descriptor_based sense buffers */
+struct scsi_sense_descriptor_based {
+/*0*/	u8 	response_code; /* 0x72 or 0x73 */
+/*1*/	u8 	sense_key; /* one of enum scsi_sense_keys (4 lower bits) */
+/*2*/	__be16	additional_sense_code; /* enum osd_additional_sense_codes */
+/*4*/	u8	Reserved[3];
+/*7*/	u8	additional_sense_length; /* n - 7 */
+/*8*/	struct	scsi_sense_descriptor ssd[0]; /* variable length, 1 or more */
+} __packed;
+
+/* some descriptors deployed by OSD */
+
+/* SPC3r23 4.5.2.3 Command-specific information sense data descriptor */
+/* Note: this is the same for descriptor_type=00 but with type=00 the
+ *        Reserved[0] == 0x80 (ie. bit-7 set)
+ */
+struct scsi_sense_command_specific_data_descriptor {
+/*0*/	u8	descriptor_type; /* (00h/01h) */
+/*1*/	u8	additional_length; /* (0Ah) */
+/*2*/	u8	Reserved[2];
+/*4*/	__be64  information;
+} __packed;
+/*12*/
+
+struct scsi_sense_key_specific_data_descriptor {
+/*0*/	u8	descriptor_type; /* (02h) */
+/*1*/	u8	additional_length; /* (06h) */
+/*2*/	u8	Reserved[2];
+/* SKSV, C/D, Reserved (2), BPV, BIT POINTER (3) */
+/*4*/	u8	sksv_cd_bpv_bp;
+/*5*/	__be16	value; /* field-pointer/progress-value/retry-count/... */
+/*7*/	u8	Reserved2;
+} __packed;
+/*8*/
+
+/* 4.16.2.1 OSD error identification sense data descriptor - table 52 */
+/* Note: these bits are defined LE order for easy definition, this way the BIT()
+ * number is the same as in the documentation. Below members at
+ * osd_sense_identification_data_descriptor are therefore defined __le32.
+ */
+enum osd_command_functions_bits {
+	OSD_CFB_COMMAND		 = BIT(4),
+	OSD_CFB_CMD_CAP_VERIFIED = BIT(5),
+	OSD_CFB_VALIDATION	 = BIT(7),
+	OSD_CFB_IMP_ST_ATT	 = BIT(12),
+	OSD_CFB_SET_ATT		 = BIT(20),
+	OSD_CFB_SA_CAP_VERIFIED	 = BIT(21),
+	OSD_CFB_GET_ATT		 = BIT(28),
+	OSD_CFB_GA_CAP_VERIFIED	 = BIT(29),
+};
+
+struct osd_sense_identification_data_descriptor {
+/*0*/	u8	descriptor_type; /* (06h) */
+/*1*/	u8	additional_length; /* (1Eh) */
+/*2*/	u8	Reserved[6];
+/*8*/	__le32	not_initiated_functions; /*osd_command_functions_bits*/
+/*12*/	__le32	completed_functions; /*osd_command_functions_bits*/
+/*16*/ 	__be64	partition_id;
+/*24*/	__be64	object_id;
+} __packed;
+/*32*/
+
+struct osd_sense_response_integrity_check_descriptor {
+/*0*/	u8	descriptor_type; /* (07h) */
+/*1*/	u8	additional_length; /* (20h) */
+/*2*/	u8	integrity_check_value[32]; /*FIXME: OSDv2_CRYPTO_KEYID_SIZE*/
+} __packed;
+/*34*/
+
+struct osd_sense_attributes_data_descriptor {
+/*0*/	u8	descriptor_type; /* (08h) */
+/*1*/	u8	additional_length; /* (n-2) */
+/*2*/	u8	Reserved[6];
+	struct osd_sense_attr {
+/*8*/		__be32	attr_page;
+/*12*/		__be32	attr_id;
+/*16*/	} sense_attrs[0]; /* 1 or more */
+} __packed;
+/*variable*/
+
+/* Dig into scsi_sk_illegal_request/scsi_invalid_field_in_cdb errors */
+
+/*FIXME: Support also field in CAPS*/
+#define OSD_CDB_OFFSET(F) offsetof(struct osd_cdb_head, F)
+
+enum osdv2_cdb_field_offset {
+	OSDv1_CFO_STARTING_BYTE	= OSD_CDB_OFFSET(v1.start_address),
+	OSD_CFO_STARTING_BYTE	= OSD_CDB_OFFSET(v2.start_address),
+	OSD_CFO_PARTITION_ID	= OSD_CDB_OFFSET(partition),
+	OSD_CFO_OBJECT_ID	= OSD_CDB_OFFSET(object),
+	OSD_CFO_PERMISSIONS	= sizeof(struct osd_cdb_head) +
+					offsetof(struct osd_capability_head,
+						 permissions_bit_mask),
+};
+
+#endif /* ndef __OSD_SENSE_H__ */
diff --git a/include/scsi/osd_types.h b/include/scsi/osd_types.h
new file mode 100644
index 00000000..bd0be7ed
--- /dev/null
+++ b/include/scsi/osd_types.h
@@ -0,0 +1,45 @@
+/*
+ * osd_types.h - Types and constants which are not part of the protocol.
+ *
+ * Copyright (C) 2008 Panasas Inc.  All rights reserved.
+ *
+ * Authors:
+ *   Boaz Harrosh <bharrosh@panasas.com>
+ *   Benny Halevy <bhalevy@panasas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ *
+ * Contains types and constants that are implementation specific and are
+ * used by more than one part of the osd library.
+ *     (Eg initiator/target/security_manager/...)
+ */
+#ifndef __OSD_TYPES_H__
+#define __OSD_TYPES_H__
+
+struct osd_systemid {
+	u8 data[OSD_SYSTEMID_LEN];
+};
+
+typedef u64 __bitwise osd_id;
+
+struct osd_obj_id {
+	osd_id partition;
+	osd_id id;
+};
+
+static const struct __weak osd_obj_id osd_root_object = {0, 0};
+
+struct osd_attr {
+	u32 attr_page;
+	u32 attr_id;
+	u16 len;		/* byte count of operand */
+	void *val_ptr;		/* in network order */
+};
+
+struct osd_sg_entry {
+	u64 offset;
+	u64 len;
+};
+
+#endif /* ndef __OSD_TYPES_H__ */
diff --git a/include/scsi/sas.h b/include/scsi/sas.h
new file mode 100644
index 00000000..a577a833
--- /dev/null
+++ b/include/scsi/sas.h
@@ -0,0 +1,650 @@
+/*
+ * SAS structures and definitions header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#ifndef _SAS_H_
+#define _SAS_H_
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#define SAS_ADDR_SIZE        8
+#define HASHED_SAS_ADDR_SIZE 3
+#define SAS_ADDR(_sa) ((unsigned long long) be64_to_cpu(*(__be64 *)(_sa)))
+
+#define SMP_REQUEST             0x40
+#define SMP_RESPONSE            0x41
+
+#define SSP_DATA                0x01
+#define SSP_XFER_RDY            0x05
+#define SSP_COMMAND             0x06
+#define SSP_RESPONSE            0x07
+#define SSP_TASK                0x16
+
+#define SMP_REPORT_GENERAL       0x00
+#define SMP_REPORT_MANUF_INFO    0x01
+#define SMP_READ_GPIO_REG        0x02
+#define SMP_DISCOVER             0x10
+#define SMP_REPORT_PHY_ERR_LOG   0x11
+#define SMP_REPORT_PHY_SATA      0x12
+#define SMP_REPORT_ROUTE_INFO    0x13
+#define SMP_WRITE_GPIO_REG       0x82
+#define SMP_CONF_ROUTE_INFO      0x90
+#define SMP_PHY_CONTROL          0x91
+#define SMP_PHY_TEST_FUNCTION    0x92
+
+#define SMP_RESP_FUNC_ACC        0x00
+#define SMP_RESP_FUNC_UNK        0x01
+#define SMP_RESP_FUNC_FAILED     0x02
+#define SMP_RESP_INV_FRM_LEN     0x03
+#define SMP_RESP_NO_PHY          0x10
+#define SMP_RESP_NO_INDEX        0x11
+#define SMP_RESP_PHY_NO_SATA     0x12
+#define SMP_RESP_PHY_UNK_OP      0x13
+#define SMP_RESP_PHY_UNK_TESTF   0x14
+#define SMP_RESP_PHY_TEST_INPROG 0x15
+#define SMP_RESP_PHY_VACANT      0x16
+
+/* SAM TMFs */
+#define TMF_ABORT_TASK      0x01
+#define TMF_ABORT_TASK_SET  0x02
+#define TMF_CLEAR_TASK_SET  0x04
+#define TMF_LU_RESET        0x08
+#define TMF_CLEAR_ACA       0x40
+#define TMF_QUERY_TASK      0x80
+
+/* SAS TMF responses */
+#define TMF_RESP_FUNC_COMPLETE   0x00
+#define TMF_RESP_INVALID_FRAME   0x02
+#define TMF_RESP_FUNC_ESUPP      0x04
+#define TMF_RESP_FUNC_FAILED     0x05
+#define TMF_RESP_FUNC_SUCC       0x08
+#define TMF_RESP_NO_LUN          0x09
+#define TMF_RESP_OVERLAPPED_TAG  0x0A
+
+enum sas_oob_mode {
+	OOB_NOT_CONNECTED,
+	SATA_OOB_MODE,
+	SAS_OOB_MODE
+};
+
+/* See sas_discover.c if you plan on changing these */
+enum sas_dev_type {
+	NO_DEVICE   = 0,	  /* protocol */
+	SAS_END_DEV = 1,	  /* protocol */
+	EDGE_DEV    = 2,	  /* protocol */
+	FANOUT_DEV  = 3,	  /* protocol */
+	SAS_HA      = 4,
+	SATA_DEV    = 5,
+	SATA_PM     = 7,
+	SATA_PM_PORT= 8,
+	SATA_PENDING  = 9,
+};
+
+enum sas_protocol {
+	SAS_PROTOCOL_SATA		= 0x01,
+	SAS_PROTOCOL_SMP		= 0x02,
+	SAS_PROTOCOL_STP		= 0x04,
+	SAS_PROTOCOL_SSP		= 0x08,
+	SAS_PROTOCOL_ALL		= 0x0E,
+	SAS_PROTOCOL_STP_ALL		= SAS_PROTOCOL_STP|SAS_PROTOCOL_SATA,
+};
+
+/* From the spec; local phys only */
+enum phy_func {
+	PHY_FUNC_NOP,
+	PHY_FUNC_LINK_RESET,		  /* Enables the phy */
+	PHY_FUNC_HARD_RESET,
+	PHY_FUNC_DISABLE,
+	PHY_FUNC_CLEAR_ERROR_LOG = 5,
+	PHY_FUNC_CLEAR_AFFIL,
+	PHY_FUNC_TX_SATA_PS_SIGNAL,
+	PHY_FUNC_RELEASE_SPINUP_HOLD = 0x10, /* LOCAL PORT ONLY! */
+	PHY_FUNC_SET_LINK_RATE,
+	PHY_FUNC_GET_EVENTS,
+};
+
+/* SAS LLDD would need to report only _very_few_ of those, like BROADCAST.
+ * Most of those are here for completeness.
+ */
+enum sas_prim {
+	SAS_PRIM_AIP_NORMAL = 1,
+	SAS_PRIM_AIP_R0     = 2,
+	SAS_PRIM_AIP_R1     = 3,
+	SAS_PRIM_AIP_R2     = 4,
+	SAS_PRIM_AIP_WC     = 5,
+	SAS_PRIM_AIP_WD     = 6,
+	SAS_PRIM_AIP_WP     = 7,
+	SAS_PRIM_AIP_RWP    = 8,
+
+	SAS_PRIM_BC_CH      = 9,
+	SAS_PRIM_BC_RCH0    = 10,
+	SAS_PRIM_BC_RCH1    = 11,
+	SAS_PRIM_BC_R0      = 12,
+	SAS_PRIM_BC_R1      = 13,
+	SAS_PRIM_BC_R2      = 14,
+	SAS_PRIM_BC_R3      = 15,
+	SAS_PRIM_BC_R4      = 16,
+
+	SAS_PRIM_NOTIFY_ENSP= 17,
+	SAS_PRIM_NOTIFY_R0  = 18,
+	SAS_PRIM_NOTIFY_R1  = 19,
+	SAS_PRIM_NOTIFY_R2  = 20,
+
+	SAS_PRIM_CLOSE_CLAF = 21,
+	SAS_PRIM_CLOSE_NORM = 22,
+	SAS_PRIM_CLOSE_R0   = 23,
+	SAS_PRIM_CLOSE_R1   = 24,
+
+	SAS_PRIM_OPEN_RTRY  = 25,
+	SAS_PRIM_OPEN_RJCT  = 26,
+	SAS_PRIM_OPEN_ACPT  = 27,
+
+	SAS_PRIM_DONE       = 28,
+	SAS_PRIM_BREAK      = 29,
+
+	SATA_PRIM_DMAT      = 33,
+	SATA_PRIM_PMNAK     = 34,
+	SATA_PRIM_PMACK     = 35,
+	SATA_PRIM_PMREQ_S   = 36,
+	SATA_PRIM_PMREQ_P   = 37,
+	SATA_SATA_R_ERR     = 38,
+};
+
+enum sas_open_rej_reason {
+	/* Abandon open */
+	SAS_OREJ_UNKNOWN   = 0,
+	SAS_OREJ_BAD_DEST  = 1,
+	SAS_OREJ_CONN_RATE = 2,
+	SAS_OREJ_EPROTO    = 3,
+	SAS_OREJ_RESV_AB0  = 4,
+	SAS_OREJ_RESV_AB1  = 5,
+	SAS_OREJ_RESV_AB2  = 6,
+	SAS_OREJ_RESV_AB3  = 7,
+	SAS_OREJ_WRONG_DEST= 8,
+	SAS_OREJ_STP_NORES = 9,
+
+	/* Retry open */
+	SAS_OREJ_NO_DEST   = 10,
+	SAS_OREJ_PATH_BLOCKED = 11,
+	SAS_OREJ_RSVD_CONT0 = 12,
+	SAS_OREJ_RSVD_CONT1 = 13,
+	SAS_OREJ_RSVD_INIT0 = 14,
+	SAS_OREJ_RSVD_INIT1 = 15,
+	SAS_OREJ_RSVD_STOP0 = 16,
+	SAS_OREJ_RSVD_STOP1 = 17,
+	SAS_OREJ_RSVD_RETRY = 18,
+};
+
+enum sas_gpio_reg_type {
+	SAS_GPIO_REG_CFG   = 0,
+	SAS_GPIO_REG_RX    = 1,
+	SAS_GPIO_REG_RX_GP = 2,
+	SAS_GPIO_REG_TX    = 3,
+	SAS_GPIO_REG_TX_GP = 4,
+};
+
+struct  dev_to_host_fis {
+	u8     fis_type;	  /* 0x34 */
+	u8     flags;
+	u8     status;
+	u8     error;
+
+	u8     lbal;
+	union { u8 lbam; u8 byte_count_low; };
+	union { u8 lbah; u8 byte_count_high; };
+	u8     device;
+
+	u8     lbal_exp;
+	u8     lbam_exp;
+	u8     lbah_exp;
+	u8     _r_a;
+
+	union { u8  sector_count; u8 interrupt_reason; };
+	u8     sector_count_exp;
+	u8     _r_b;
+	u8     _r_c;
+
+	u32    _r_d;
+} __attribute__ ((packed));
+
+struct host_to_dev_fis {
+	u8     fis_type;	  /* 0x27 */
+	u8     flags;
+	u8     command;
+	u8     features;
+
+	u8     lbal;
+	union { u8 lbam; u8 byte_count_low; };
+	union { u8 lbah; u8 byte_count_high; };
+	u8     device;
+
+	u8     lbal_exp;
+	u8     lbam_exp;
+	u8     lbah_exp;
+	u8     features_exp;
+
+	union { u8  sector_count; u8 interrupt_reason; };
+	u8     sector_count_exp;
+	u8     _r_a;
+	u8     control;
+
+	u32    _r_b;
+} __attribute__ ((packed));
+
+/* Prefer to have code clarity over header file clarity.
+ */
+#ifdef __LITTLE_ENDIAN_BITFIELD
+struct sas_identify_frame {
+	/* Byte 0 */
+	u8  frame_type:4;
+	u8  dev_type:3;
+	u8  _un0:1;
+
+	/* Byte 1 */
+	u8  _un1;
+
+	/* Byte 2 */
+	union {
+		struct {
+			u8  _un20:1;
+			u8  smp_iport:1;
+			u8  stp_iport:1;
+			u8  ssp_iport:1;
+			u8  _un247:4;
+		};
+		u8 initiator_bits;
+	};
+
+	/* Byte 3 */
+	union {
+		struct {
+			u8  _un30:1;
+			u8 smp_tport:1;
+			u8 stp_tport:1;
+			u8 ssp_tport:1;
+			u8 _un347:4;
+		};
+		u8 target_bits;
+	};
+
+	/* Byte 4 - 11 */
+	u8 _un4_11[8];
+
+	/* Byte 12 - 19 */
+	u8 sas_addr[SAS_ADDR_SIZE];
+
+	/* Byte 20 */
+	u8 phy_id;
+
+	u8 _un21_27[7];
+
+	__be32 crc;
+} __attribute__ ((packed));
+
+struct ssp_frame_hdr {
+	u8     frame_type;
+	u8     hashed_dest_addr[HASHED_SAS_ADDR_SIZE];
+	u8     _r_a;
+	u8     hashed_src_addr[HASHED_SAS_ADDR_SIZE];
+	__be16 _r_b;
+
+	u8     changing_data_ptr:1;
+	u8     retransmit:1;
+	u8     retry_data_frames:1;
+	u8     _r_c:5;
+
+	u8     num_fill_bytes:2;
+	u8     _r_d:6;
+
+	u32    _r_e;
+	__be16 tag;
+	__be16 tptt;
+	__be32 data_offs;
+} __attribute__ ((packed));
+
+struct ssp_response_iu {
+	u8     _r_a[10];
+
+	u8     datapres:2;
+	u8     _r_b:6;
+
+	u8     status;
+
+	u32    _r_c;
+
+	__be32 sense_data_len;
+	__be32 response_data_len;
+
+	u8     resp_data[0];
+	u8     sense_data[0];
+} __attribute__ ((packed));
+
+/* ---------- SMP ---------- */
+
+struct report_general_resp {
+	__be16  change_count;
+	__be16  route_indexes;
+	u8      _r_a;
+	u8      num_phys;
+
+	u8      conf_route_table:1;
+	u8      configuring:1;
+	u8	config_others:1;
+	u8	orej_retry_supp:1;
+	u8	stp_cont_awt:1;
+	u8	self_config:1;
+	u8	zone_config:1;
+	u8	t2t_supp:1;
+
+	u8      _r_c;
+
+	u8      enclosure_logical_id[8];
+
+	u8      _r_d[12];
+} __attribute__ ((packed));
+
+struct discover_resp {
+	u8    _r_a[5];
+
+	u8    phy_id;
+	__be16 _r_b;
+
+	u8    _r_c:4;
+	u8    attached_dev_type:3;
+	u8    _r_d:1;
+
+	u8    linkrate:4;
+	u8    _r_e:4;
+
+	u8    attached_sata_host:1;
+	u8    iproto:3;
+	u8    _r_f:4;
+
+	u8    attached_sata_dev:1;
+	u8    tproto:3;
+	u8    _r_g:3;
+	u8    attached_sata_ps:1;
+
+	u8    sas_addr[8];
+	u8    attached_sas_addr[8];
+	u8    attached_phy_id;
+
+	u8    _r_h[7];
+
+	u8    hmin_linkrate:4;
+	u8    pmin_linkrate:4;
+	u8    hmax_linkrate:4;
+	u8    pmax_linkrate:4;
+
+	u8    change_count;
+
+	u8    pptv:4;
+	u8    _r_i:3;
+	u8    virtual:1;
+
+	u8    routing_attr:4;
+	u8    _r_j:4;
+
+	u8    conn_type;
+	u8    conn_el_index;
+	u8    conn_phy_link;
+
+	u8    _r_k[8];
+} __attribute__ ((packed));
+
+struct report_phy_sata_resp {
+	u8    _r_a[5];
+
+	u8    phy_id;
+	u8    _r_b;
+
+	u8    affil_valid:1;
+	u8    affil_supp:1;
+	u8    _r_c:6;
+
+	u32    _r_d;
+
+	u8    stp_sas_addr[8];
+
+	struct dev_to_host_fis fis;
+
+	u32   _r_e;
+
+	u8    affil_stp_ini_addr[8];
+
+	__be32 crc;
+} __attribute__ ((packed));
+
+struct smp_resp {
+	u8    frame_type;
+	u8    function;
+	u8    result;
+	u8    reserved;
+	union {
+		struct report_general_resp  rg;
+		struct discover_resp        disc;
+		struct report_phy_sata_resp rps;
+	};
+} __attribute__ ((packed));
+
+#elif defined(__BIG_ENDIAN_BITFIELD)
+struct sas_identify_frame {
+	/* Byte 0 */
+	u8  _un0:1;
+	u8  dev_type:3;
+	u8  frame_type:4;
+
+	/* Byte 1 */
+	u8  _un1;
+
+	/* Byte 2 */
+	union {
+		struct {
+			u8  _un247:4;
+			u8  ssp_iport:1;
+			u8  stp_iport:1;
+			u8  smp_iport:1;
+			u8  _un20:1;
+		};
+		u8 initiator_bits;
+	};
+
+	/* Byte 3 */
+	union {
+		struct {
+			u8 _un347:4;
+			u8 ssp_tport:1;
+			u8 stp_tport:1;
+			u8 smp_tport:1;
+			u8 _un30:1;
+		};
+		u8 target_bits;
+	};
+
+	/* Byte 4 - 11 */
+	u8 _un4_11[8];
+
+	/* Byte 12 - 19 */
+	u8 sas_addr[SAS_ADDR_SIZE];
+
+	/* Byte 20 */
+	u8 phy_id;
+
+	u8 _un21_27[7];
+
+	__be32 crc;
+} __attribute__ ((packed));
+
+struct ssp_frame_hdr {
+	u8     frame_type;
+	u8     hashed_dest_addr[HASHED_SAS_ADDR_SIZE];
+	u8     _r_a;
+	u8     hashed_src_addr[HASHED_SAS_ADDR_SIZE];
+	__be16 _r_b;
+
+	u8     _r_c:5;
+	u8     retry_data_frames:1;
+	u8     retransmit:1;
+	u8     changing_data_ptr:1;
+
+	u8     _r_d:6;
+	u8     num_fill_bytes:2;
+
+	u32    _r_e;
+	__be16 tag;
+	__be16 tptt;
+	__be32 data_offs;
+} __attribute__ ((packed));
+
+struct ssp_response_iu {
+	u8     _r_a[10];
+
+	u8     _r_b:6;
+	u8     datapres:2;
+
+	u8     status;
+
+	u32    _r_c;
+
+	__be32 sense_data_len;
+	__be32 response_data_len;
+
+	u8     resp_data[0];
+	u8     sense_data[0];
+} __attribute__ ((packed));
+
+/* ---------- SMP ---------- */
+
+struct report_general_resp {
+	__be16  change_count;
+	__be16  route_indexes;
+	u8      _r_a;
+	u8      num_phys;
+
+	u8	t2t_supp:1;
+	u8	zone_config:1;
+	u8	self_config:1;
+	u8	stp_cont_awt:1;
+	u8	orej_retry_supp:1;
+	u8	config_others:1;
+	u8      configuring:1;
+	u8      conf_route_table:1;
+
+	u8      _r_c;
+
+	u8      enclosure_logical_id[8];
+
+	u8      _r_d[12];
+} __attribute__ ((packed));
+
+struct discover_resp {
+	u8    _r_a[5];
+
+	u8    phy_id;
+	__be16 _r_b;
+
+	u8    _r_d:1;
+	u8    attached_dev_type:3;
+	u8    _r_c:4;
+
+	u8    _r_e:4;
+	u8    linkrate:4;
+
+	u8    _r_f:4;
+	u8    iproto:3;
+	u8    attached_sata_host:1;
+
+	u8    attached_sata_ps:1;
+	u8    _r_g:3;
+	u8    tproto:3;
+	u8    attached_sata_dev:1;
+
+	u8    sas_addr[8];
+	u8    attached_sas_addr[8];
+	u8    attached_phy_id;
+
+	u8    _r_h[7];
+
+	u8    pmin_linkrate:4;
+	u8    hmin_linkrate:4;
+	u8    pmax_linkrate:4;
+	u8    hmax_linkrate:4;
+
+	u8    change_count;
+
+	u8    virtual:1;
+	u8    _r_i:3;
+	u8    pptv:4;
+
+	u8    _r_j:4;
+	u8    routing_attr:4;
+
+	u8    conn_type;
+	u8    conn_el_index;
+	u8    conn_phy_link;
+
+	u8    _r_k[8];
+} __attribute__ ((packed));
+
+struct report_phy_sata_resp {
+	u8    _r_a[5];
+
+	u8    phy_id;
+	u8    _r_b;
+
+	u8    _r_c:6;
+	u8    affil_supp:1;
+	u8    affil_valid:1;
+
+	u32   _r_d;
+
+	u8    stp_sas_addr[8];
+
+	struct dev_to_host_fis fis;
+
+	u32   _r_e;
+
+	u8    affil_stp_ini_addr[8];
+
+	__be32 crc;
+} __attribute__ ((packed));
+
+struct smp_resp {
+	u8    frame_type;
+	u8    function;
+	u8    result;
+	u8    reserved;
+	union {
+		struct report_general_resp  rg;
+		struct discover_resp        disc;
+		struct report_phy_sata_resp rps;
+	};
+} __attribute__ ((packed));
+
+#else
+#error "Bitfield order not defined!"
+#endif
+
+#endif /* _SAS_H_ */
diff --git a/include/scsi/sas_ata.h b/include/scsi/sas_ata.h
new file mode 100644
index 00000000..77670e82
--- /dev/null
+++ b/include/scsi/sas_ata.h
@@ -0,0 +1,90 @@
+/*
+ * Support for SATA devices on Serial Attached SCSI (SAS) controllers
+ *
+ * Copyright (C) 2006 IBM Corporation
+ *
+ * Written by: Darrick J. Wong <djwong@us.ibm.com>, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#ifndef _SAS_ATA_H_
+#define _SAS_ATA_H_
+
+#include <linux/libata.h>
+#include <scsi/libsas.h>
+
+#ifdef CONFIG_SCSI_SAS_ATA
+
+static inline int dev_is_sata(struct domain_device *dev)
+{
+	return dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM ||
+	       dev->dev_type == SATA_PM_PORT || dev->dev_type == SATA_PENDING;
+}
+
+int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy);
+int sas_ata_init(struct domain_device *dev);
+void sas_ata_task_abort(struct sas_task *task);
+void sas_ata_strategy_handler(struct Scsi_Host *shost);
+void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q,
+		struct list_head *done_q);
+void sas_ata_schedule_reset(struct domain_device *dev);
+void sas_ata_wait_eh(struct domain_device *dev);
+void sas_probe_sata(struct asd_sas_port *port);
+#else
+
+
+static inline int dev_is_sata(struct domain_device *dev)
+{
+	return 0;
+}
+static inline int sas_ata_init(struct domain_device *dev)
+{
+	return 0;
+}
+static inline void sas_ata_task_abort(struct sas_task *task)
+{
+}
+
+static inline void sas_ata_strategy_handler(struct Scsi_Host *shost)
+{
+}
+
+static inline void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q,
+			      struct list_head *done_q)
+{
+}
+
+static inline void sas_ata_schedule_reset(struct domain_device *dev)
+{
+}
+
+static inline void sas_ata_wait_eh(struct domain_device *dev)
+{
+}
+
+static inline void sas_probe_sata(struct asd_sas_port *port)
+{
+}
+
+static inline int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy)
+{
+	return 0;
+}
+#endif
+
+#endif /* _SAS_ATA_H_ */
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
new file mode 100644
index 00000000..f34a5a87
--- /dev/null
+++ b/include/scsi/scsi.h
@@ -0,0 +1,565 @@
+/*
+ * This header file contains public constants and structures used by
+ * the scsi code for linux.
+ *
+ * For documentation on the OPCODES, MESSAGES, and SENSE values,
+ * please consult the SCSI standard.
+ */
+#ifndef _SCSI_SCSI_H
+#define _SCSI_SCSI_H
+
+#include <linux/types.h>
+#include <linux/scatterlist.h>
+
+struct scsi_cmnd;
+
+/*
+ * The maximum number of SG segments that we will put inside a
+ * scatterlist (unless chaining is used). Should ideally fit inside a
+ * single page, to avoid a higher order allocation.  We could define this
+ * to SG_MAX_SINGLE_ALLOC to pack correctly at the highest order.  The
+ * minimum value is 32
+ */
+#define SCSI_MAX_SG_SEGMENTS	128
+
+/*
+ * Like SCSI_MAX_SG_SEGMENTS, but for archs that have sg chaining. This limit
+ * is totally arbitrary, a setting of 2048 will get you at least 8mb ios.
+ */
+#ifdef ARCH_HAS_SG_CHAIN
+#define SCSI_MAX_SG_CHAIN_SEGMENTS	2048
+#else
+#define SCSI_MAX_SG_CHAIN_SEGMENTS	SCSI_MAX_SG_SEGMENTS
+#endif
+
+/*
+ * DIX-capable adapters effectively support infinite chaining for the
+ * protection information scatterlist
+ */
+#define SCSI_MAX_PROT_SG_SEGMENTS	0xFFFF
+
+/*
+ * Special value for scanning to specify scanning or rescanning of all
+ * possible channels, (target) ids, or luns on a given shost.
+ */
+#define SCAN_WILD_CARD	~0
+
+/*
+ *      SCSI opcodes
+ */
+
+#define TEST_UNIT_READY       0x00
+#define REZERO_UNIT           0x01
+#define REQUEST_SENSE         0x03
+#define FORMAT_UNIT           0x04
+#define READ_BLOCK_LIMITS     0x05
+#define REASSIGN_BLOCKS       0x07
+#define INITIALIZE_ELEMENT_STATUS 0x07
+#define READ_6                0x08
+#define WRITE_6               0x0a
+#define SEEK_6                0x0b
+#define READ_REVERSE          0x0f
+#define WRITE_FILEMARKS       0x10
+#define SPACE                 0x11
+#define INQUIRY               0x12
+#define RECOVER_BUFFERED_DATA 0x14
+#define MODE_SELECT           0x15
+#define RESERVE               0x16
+#define RELEASE               0x17
+#define COPY                  0x18
+#define ERASE                 0x19
+#define MODE_SENSE            0x1a
+#define START_STOP            0x1b
+#define RECEIVE_DIAGNOSTIC    0x1c
+#define SEND_DIAGNOSTIC       0x1d
+#define ALLOW_MEDIUM_REMOVAL  0x1e
+
+#define READ_FORMAT_CAPACITIES 0x23
+#define SET_WINDOW            0x24
+#define READ_CAPACITY         0x25
+#define READ_10               0x28
+#define WRITE_10              0x2a
+#define SEEK_10               0x2b
+#define POSITION_TO_ELEMENT   0x2b
+#define WRITE_VERIFY          0x2e
+#define VERIFY                0x2f
+#define SEARCH_HIGH           0x30
+#define SEARCH_EQUAL          0x31
+#define SEARCH_LOW            0x32
+#define SET_LIMITS            0x33
+#define PRE_FETCH             0x34
+#define READ_POSITION         0x34
+#define SYNCHRONIZE_CACHE     0x35
+#define LOCK_UNLOCK_CACHE     0x36
+#define READ_DEFECT_DATA      0x37
+#define MEDIUM_SCAN           0x38
+#define COMPARE               0x39
+#define COPY_VERIFY           0x3a
+#define WRITE_BUFFER          0x3b
+#define READ_BUFFER           0x3c
+#define UPDATE_BLOCK          0x3d
+#define READ_LONG             0x3e
+#define WRITE_LONG            0x3f
+#define CHANGE_DEFINITION     0x40
+#define WRITE_SAME            0x41
+#define UNMAP		      0x42
+#define READ_TOC              0x43
+#define READ_HEADER           0x44
+#define GET_EVENT_STATUS_NOTIFICATION 0x4a
+#define LOG_SELECT            0x4c
+#define LOG_SENSE             0x4d
+#define XDWRITEREAD_10        0x53
+#define MODE_SELECT_10        0x55
+#define RESERVE_10            0x56
+#define RELEASE_10            0x57
+#define MODE_SENSE_10         0x5a
+#define PERSISTENT_RESERVE_IN 0x5e
+#define PERSISTENT_RESERVE_OUT 0x5f
+#define VARIABLE_LENGTH_CMD   0x7f
+#define REPORT_LUNS           0xa0
+#define SECURITY_PROTOCOL_IN  0xa2
+#define MAINTENANCE_IN        0xa3
+#define MAINTENANCE_OUT       0xa4
+#define MOVE_MEDIUM           0xa5
+#define EXCHANGE_MEDIUM       0xa6
+#define READ_12               0xa8
+#define WRITE_12              0xaa
+#define READ_MEDIA_SERIAL_NUMBER 0xab
+#define WRITE_VERIFY_12       0xae
+#define VERIFY_12	      0xaf
+#define SEARCH_HIGH_12        0xb0
+#define SEARCH_EQUAL_12       0xb1
+#define SEARCH_LOW_12         0xb2
+#define SECURITY_PROTOCOL_OUT 0xb5
+#define READ_ELEMENT_STATUS   0xb8
+#define SEND_VOLUME_TAG       0xb6
+#define WRITE_LONG_2          0xea
+#define EXTENDED_COPY         0x83
+#define RECEIVE_COPY_RESULTS  0x84
+#define ACCESS_CONTROL_IN     0x86
+#define ACCESS_CONTROL_OUT    0x87
+#define READ_16               0x88
+#define WRITE_16              0x8a
+#define READ_ATTRIBUTE        0x8c
+#define WRITE_ATTRIBUTE	      0x8d
+#define VERIFY_16	      0x8f
+#define SYNCHRONIZE_CACHE_16  0x91
+#define WRITE_SAME_16	      0x93
+#define SERVICE_ACTION_IN     0x9e
+/* values for service action in */
+#define	SAI_READ_CAPACITY_16  0x10
+#define SAI_GET_LBA_STATUS    0x12
+/* values for VARIABLE_LENGTH_CMD service action codes
+ * see spc4r17 Section D.3.5, table D.7 and D.8 */
+#define VLC_SA_RECEIVE_CREDENTIAL 0x1800
+/* values for maintenance in */
+#define MI_REPORT_IDENTIFYING_INFORMATION 0x05
+#define MI_REPORT_TARGET_PGS  0x0a
+#define MI_REPORT_ALIASES     0x0b
+#define MI_REPORT_SUPPORTED_OPERATION_CODES 0x0c
+#define MI_REPORT_SUPPORTED_TASK_MANAGEMENT_FUNCTIONS 0x0d
+#define MI_REPORT_PRIORITY   0x0e
+#define MI_REPORT_TIMESTAMP  0x0f
+#define MI_MANAGEMENT_PROTOCOL_IN 0x10
+/* values for maintenance out */
+#define MO_SET_IDENTIFYING_INFORMATION 0x06
+#define MO_SET_TARGET_PGS     0x0a
+#define MO_CHANGE_ALIASES     0x0b
+#define MO_SET_PRIORITY       0x0e
+#define MO_SET_TIMESTAMP      0x0f
+#define MO_MANAGEMENT_PROTOCOL_OUT 0x10
+/* values for variable length command */
+#define XDREAD_32	      0x03
+#define XDWRITE_32	      0x04
+#define XPWRITE_32	      0x06
+#define XDWRITEREAD_32	      0x07
+#define READ_32		      0x09
+#define VERIFY_32	      0x0a
+#define WRITE_32	      0x0b
+#define WRITE_SAME_32	      0x0d
+
+/* Values for T10/04-262r7 */
+#define	ATA_16		      0x85	/* 16-byte pass-thru */
+#define	ATA_12		      0xa1	/* 12-byte pass-thru */
+
+/*
+ *	SCSI command lengths
+ */
+
+#define SCSI_MAX_VARLEN_CDB_SIZE 260
+
+/* defined in T10 SCSI Primary Commands-2 (SPC2) */
+struct scsi_varlen_cdb_hdr {
+	__u8 opcode;        /* opcode always == VARIABLE_LENGTH_CMD */
+	__u8 control;
+	__u8 misc[5];
+	__u8 additional_cdb_length;         /* total cdb length - 8 */
+	__be16 service_action;
+	/* service specific data follows */
+};
+
+static inline unsigned
+scsi_varlen_cdb_length(const void *hdr)
+{
+	return ((struct scsi_varlen_cdb_hdr *)hdr)->additional_cdb_length + 8;
+}
+
+extern const unsigned char scsi_command_size_tbl[8];
+#define COMMAND_SIZE(opcode) scsi_command_size_tbl[((opcode) >> 5) & 7]
+
+static inline unsigned
+scsi_command_size(const unsigned char *cmnd)
+{
+	return (cmnd[0] == VARIABLE_LENGTH_CMD) ?
+		scsi_varlen_cdb_length(cmnd) : COMMAND_SIZE(cmnd[0]);
+}
+
+/*
+ *  SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft
+ *  T10/1561-D Revision 4 Draft dated 7th November 2002.
+ */
+#define SAM_STAT_GOOD            0x00
+#define SAM_STAT_CHECK_CONDITION 0x02
+#define SAM_STAT_CONDITION_MET   0x04
+#define SAM_STAT_BUSY            0x08
+#define SAM_STAT_INTERMEDIATE    0x10
+#define SAM_STAT_INTERMEDIATE_CONDITION_MET 0x14
+#define SAM_STAT_RESERVATION_CONFLICT 0x18
+#define SAM_STAT_COMMAND_TERMINATED 0x22	/* obsolete in SAM-3 */
+#define SAM_STAT_TASK_SET_FULL   0x28
+#define SAM_STAT_ACA_ACTIVE      0x30
+#define SAM_STAT_TASK_ABORTED    0x40
+
+/** scsi_status_is_good - check the status return.
+ *
+ * @status: the status passed up from the driver (including host and
+ *          driver components)
+ *
+ * This returns true for known good conditions that may be treated as
+ * command completed normally
+ */
+static inline int scsi_status_is_good(int status)
+{
+	/*
+	 * FIXME: bit0 is listed as reserved in SCSI-2, but is
+	 * significant in SCSI-3.  For now, we follow the SCSI-2
+	 * behaviour and ignore reserved bits.
+	 */
+	status &= 0xfe;
+	return ((status == SAM_STAT_GOOD) ||
+		(status == SAM_STAT_INTERMEDIATE) ||
+		(status == SAM_STAT_INTERMEDIATE_CONDITION_MET) ||
+		/* FIXME: this is obsolete in SAM-3 */
+		(status == SAM_STAT_COMMAND_TERMINATED));
+}
+
+/*
+ *  Status codes. These are deprecated as they are shifted 1 bit right
+ *  from those found in the SCSI standards. This causes confusion for
+ *  applications that are ported to several OSes. Prefer SAM Status codes
+ *  above.
+ */
+
+#define GOOD                 0x00
+#define CHECK_CONDITION      0x01
+#define CONDITION_GOOD       0x02
+#define BUSY                 0x04
+#define INTERMEDIATE_GOOD    0x08
+#define INTERMEDIATE_C_GOOD  0x0a
+#define RESERVATION_CONFLICT 0x0c
+#define COMMAND_TERMINATED   0x11
+#define QUEUE_FULL           0x14
+#define ACA_ACTIVE           0x18
+#define TASK_ABORTED         0x20
+
+#define STATUS_MASK          0xfe
+
+/*
+ *  SENSE KEYS
+ */
+
+#define NO_SENSE            0x00
+#define RECOVERED_ERROR     0x01
+#define NOT_READY           0x02
+#define MEDIUM_ERROR        0x03
+#define HARDWARE_ERROR      0x04
+#define ILLEGAL_REQUEST     0x05
+#define UNIT_ATTENTION      0x06
+#define DATA_PROTECT        0x07
+#define BLANK_CHECK         0x08
+#define COPY_ABORTED        0x0a
+#define ABORTED_COMMAND     0x0b
+#define VOLUME_OVERFLOW     0x0d
+#define MISCOMPARE          0x0e
+
+
+/*
+ *  DEVICE TYPES
+ *  Please keep them in 0x%02x format for $MODALIAS to work
+ */
+
+#define TYPE_DISK           0x00
+#define TYPE_TAPE           0x01
+#define TYPE_PRINTER        0x02
+#define TYPE_PROCESSOR      0x03    /* HP scanners use this */
+#define TYPE_WORM           0x04    /* Treated as ROM by our system */
+#define TYPE_ROM            0x05
+#define TYPE_SCANNER        0x06
+#define TYPE_MOD            0x07    /* Magneto-optical disk - 
+				     * - treated as TYPE_DISK */
+#define TYPE_MEDIUM_CHANGER 0x08
+#define TYPE_COMM           0x09    /* Communications device */
+#define TYPE_RAID           0x0c
+#define TYPE_ENCLOSURE      0x0d    /* Enclosure Services Device */
+#define TYPE_RBC	    0x0e
+#define TYPE_OSD            0x11
+#define TYPE_NO_LUN         0x7f
+
+/* SCSI protocols; these are taken from SPC-3 section 7.5 */
+enum scsi_protocol {
+	SCSI_PROTOCOL_FCP = 0,	/* Fibre Channel */
+	SCSI_PROTOCOL_SPI = 1,	/* parallel SCSI */
+	SCSI_PROTOCOL_SSA = 2,	/* Serial Storage Architecture - Obsolete */
+	SCSI_PROTOCOL_SBP = 3,	/* firewire */
+	SCSI_PROTOCOL_SRP = 4,	/* Infiniband RDMA */
+	SCSI_PROTOCOL_ISCSI = 5,
+	SCSI_PROTOCOL_SAS = 6,
+	SCSI_PROTOCOL_ADT = 7,	/* Media Changers */
+	SCSI_PROTOCOL_ATA = 8,
+	SCSI_PROTOCOL_UNSPEC = 0xf, /* No specific protocol */
+};
+
+/* Returns a human-readable name for the device */
+extern const char * scsi_device_type(unsigned type);
+
+/*
+ * standard mode-select header prepended to all mode-select commands
+ */
+
+struct ccs_modesel_head {
+	__u8 _r1;			/* reserved */
+	__u8 medium;		/* device-specific medium type */
+	__u8 _r2;			/* reserved */
+	__u8 block_desc_length;	/* block descriptor length */
+	__u8 density;		/* device-specific density code */
+	__u8 number_blocks_hi;	/* number of blocks in this block desc */
+	__u8 number_blocks_med;
+	__u8 number_blocks_lo;
+	__u8 _r3;
+	__u8 block_length_hi;	/* block length for blocks in this desc */
+	__u8 block_length_med;
+	__u8 block_length_lo;
+};
+
+/*
+ * ScsiLun: 8 byte LUN.
+ */
+struct scsi_lun {
+	__u8 scsi_lun[8];
+};
+
+/*
+ * The Well Known LUNS (SAM-3) in our int representation of a LUN
+ */
+#define SCSI_W_LUN_BASE 0xc100
+#define SCSI_W_LUN_REPORT_LUNS (SCSI_W_LUN_BASE + 1)
+#define SCSI_W_LUN_ACCESS_CONTROL (SCSI_W_LUN_BASE + 2)
+#define SCSI_W_LUN_TARGET_LOG_PAGE (SCSI_W_LUN_BASE + 3)
+
+static inline int scsi_is_wlun(unsigned int lun)
+{
+	return (lun & 0xff00) == SCSI_W_LUN_BASE;
+}
+
+
+/*
+ *  MESSAGE CODES
+ */
+
+#define COMMAND_COMPLETE    0x00
+#define EXTENDED_MESSAGE    0x01
+#define     EXTENDED_MODIFY_DATA_POINTER    0x00
+#define     EXTENDED_SDTR                   0x01
+#define     EXTENDED_EXTENDED_IDENTIFY      0x02    /* SCSI-I only */
+#define     EXTENDED_WDTR                   0x03
+#define     EXTENDED_PPR                    0x04
+#define     EXTENDED_MODIFY_BIDI_DATA_PTR   0x05
+#define SAVE_POINTERS       0x02
+#define RESTORE_POINTERS    0x03
+#define DISCONNECT          0x04
+#define INITIATOR_ERROR     0x05
+#define ABORT_TASK_SET      0x06
+#define MESSAGE_REJECT      0x07
+#define NOP                 0x08
+#define MSG_PARITY_ERROR    0x09
+#define LINKED_CMD_COMPLETE 0x0a
+#define LINKED_FLG_CMD_COMPLETE 0x0b
+#define TARGET_RESET        0x0c
+#define ABORT_TASK          0x0d
+#define CLEAR_TASK_SET      0x0e
+#define INITIATE_RECOVERY   0x0f            /* SCSI-II only */
+#define RELEASE_RECOVERY    0x10            /* SCSI-II only */
+#define CLEAR_ACA           0x16
+#define LOGICAL_UNIT_RESET  0x17
+#define SIMPLE_QUEUE_TAG    0x20
+#define HEAD_OF_QUEUE_TAG   0x21
+#define ORDERED_QUEUE_TAG   0x22
+#define IGNORE_WIDE_RESIDUE 0x23
+#define ACA                 0x24
+#define QAS_REQUEST         0x55
+
+/* Old SCSI2 names, don't use in new code */
+#define BUS_DEVICE_RESET    TARGET_RESET
+#define ABORT               ABORT_TASK_SET
+
+/*
+ * Host byte codes
+ */
+
+#define DID_OK          0x00	/* NO error                                */
+#define DID_NO_CONNECT  0x01	/* Couldn't connect before timeout period  */
+#define DID_BUS_BUSY    0x02	/* BUS stayed busy through time out period */
+#define DID_TIME_OUT    0x03	/* TIMED OUT for other reason              */
+#define DID_BAD_TARGET  0x04	/* BAD target.                             */
+#define DID_ABORT       0x05	/* Told to abort for some other reason     */
+#define DID_PARITY      0x06	/* Parity error                            */
+#define DID_ERROR       0x07	/* Internal error                          */
+#define DID_RESET       0x08	/* Reset by somebody.                      */
+#define DID_BAD_INTR    0x09	/* Got an interrupt we weren't expecting.  */
+#define DID_PASSTHROUGH 0x0a	/* Force command past mid-layer            */
+#define DID_SOFT_ERROR  0x0b	/* The low level driver just wish a retry  */
+#define DID_IMM_RETRY   0x0c	/* Retry without decrementing retry count  */
+#define DID_REQUEUE	0x0d	/* Requeue command (no immediate retry) also
+				 * without decrementing the retry count	   */
+#define DID_TRANSPORT_DISRUPTED 0x0e /* Transport error disrupted execution
+				      * and the driver blocked the port to
+				      * recover the link. Transport class will
+				      * retry or fail IO */
+#define DID_TRANSPORT_FAILFAST	0x0f /* Transport class fastfailed the io */
+#define DID_TARGET_FAILURE 0x10 /* Permanent target failure, do not retry on
+				 * other paths */
+#define DID_NEXUS_FAILURE 0x11  /* Permanent nexus failure, retry on other
+				 * paths might yield different results */
+#define DRIVER_OK       0x00	/* Driver status                           */
+
+/*
+ *  These indicate the error that occurred, and what is available.
+ */
+
+#define DRIVER_BUSY         0x01
+#define DRIVER_SOFT         0x02
+#define DRIVER_MEDIA        0x03
+#define DRIVER_ERROR        0x04
+
+#define DRIVER_INVALID      0x05
+#define DRIVER_TIMEOUT      0x06
+#define DRIVER_HARD         0x07
+#define DRIVER_SENSE	    0x08
+
+/*
+ * Internal return values.
+ */
+
+#define NEEDS_RETRY     0x2001
+#define SUCCESS         0x2002
+#define FAILED          0x2003
+#define QUEUED          0x2004
+#define SOFT_ERROR      0x2005
+#define ADD_TO_MLQUEUE  0x2006
+#define TIMEOUT_ERROR   0x2007
+#define SCSI_RETURN_NOT_HANDLED   0x2008
+#define FAST_IO_FAIL	0x2009
+#define TARGET_ERROR    0x200A
+
+/*
+ * Midlevel queue return values.
+ */
+#define SCSI_MLQUEUE_HOST_BUSY   0x1055
+#define SCSI_MLQUEUE_DEVICE_BUSY 0x1056
+#define SCSI_MLQUEUE_EH_RETRY    0x1057
+#define SCSI_MLQUEUE_TARGET_BUSY 0x1058
+
+/*
+ *  Use these to separate status msg and our bytes
+ *
+ *  These are set by:
+ *
+ *      status byte = set from target device
+ *      msg_byte    = return status from host adapter itself.
+ *      host_byte   = set by low-level driver to indicate status.
+ *      driver_byte = set by mid-level.
+ */
+#define status_byte(result) (((result) >> 1) & 0x7f)
+#define msg_byte(result)    (((result) >> 8) & 0xff)
+#define host_byte(result)   (((result) >> 16) & 0xff)
+#define driver_byte(result) (((result) >> 24) & 0xff)
+
+#define sense_class(sense)  (((sense) >> 4) & 0x7)
+#define sense_error(sense)  ((sense) & 0xf)
+#define sense_valid(sense)  ((sense) & 0x80)
+
+/*
+ * default timeouts
+*/
+#define FORMAT_UNIT_TIMEOUT		(2 * 60 * 60 * HZ)
+#define START_STOP_TIMEOUT		(60 * HZ)
+#define MOVE_MEDIUM_TIMEOUT		(5 * 60 * HZ)
+#define READ_ELEMENT_STATUS_TIMEOUT	(5 * 60 * HZ)
+#define READ_DEFECT_DATA_TIMEOUT	(60 * HZ )
+
+
+#define IDENTIFY_BASE       0x80
+#define IDENTIFY(can_disconnect, lun)   (IDENTIFY_BASE |\
+		     ((can_disconnect) ?  0x40 : 0) |\
+		     ((lun) & 0x07))
+
+/*
+ *  struct scsi_device::scsi_level values. For SCSI devices other than those
+ *  prior to SCSI-2 (i.e. over 12 years old) this value is (resp[2] + 1)
+ *  where "resp" is a byte array of the response to an INQUIRY. The scsi_level
+ *  variable is visible to the user via sysfs.
+ */
+
+#define SCSI_UNKNOWN    0
+#define SCSI_1          1
+#define SCSI_1_CCS      2
+#define SCSI_2          3
+#define SCSI_3          4        /* SPC */
+#define SCSI_SPC_2      5
+#define SCSI_SPC_3      6
+
+/*
+ * INQ PERIPHERAL QUALIFIERS
+ */
+#define SCSI_INQ_PQ_CON         0x00
+#define SCSI_INQ_PQ_NOT_CON     0x01
+#define SCSI_INQ_PQ_NOT_CAP     0x03
+
+
+/*
+ * Here are some scsi specific ioctl commands which are sometimes useful.
+ *
+ * Note that include/linux/cdrom.h also defines IOCTL 0x5300 - 0x5395
+ */
+
+/* Used to obtain PUN and LUN info.  Conflicts with CDROMAUDIOBUFSIZ */
+#define SCSI_IOCTL_GET_IDLUN		0x5382
+
+/* 0x5383 and 0x5384 were used for SCSI_IOCTL_TAGGED_{ENABLE,DISABLE} */
+
+/* Used to obtain the host number of a device. */
+#define SCSI_IOCTL_PROBE_HOST		0x5385
+
+/* Used to obtain the bus number for a device */
+#define SCSI_IOCTL_GET_BUS_NUMBER	0x5386
+
+/* Used to obtain the PCI location of a device */
+#define SCSI_IOCTL_GET_PCI		0x5387
+
+/* Pull a u32 out of a SCSI message (using BE SCSI conventions) */
+static inline __u32 scsi_to_u32(__u8 *ptr)
+{
+	return (ptr[0]<<24) + (ptr[1]<<16) + (ptr[2]<<8) + ptr[3];
+}
+
+#endif /* _SCSI_SCSI_H */
diff --git a/include/scsi/scsi_bsg_fc.h b/include/scsi/scsi_bsg_fc.h
new file mode 100644
index 00000000..91a4e4ff
--- /dev/null
+++ b/include/scsi/scsi_bsg_fc.h
@@ -0,0 +1,322 @@
+/*
+ *  FC Transport BSG Interface
+ *
+ *  Copyright (C) 2008   James Smart, Emulex Corporation
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef SCSI_BSG_FC_H
+#define SCSI_BSG_FC_H
+
+/*
+ * This file intended to be included by both kernel and user space
+ */
+
+#include <scsi/scsi.h>
+
+/*
+ * FC Transport SGIO v4 BSG Message Support
+ */
+
+/* Default BSG request timeout (in seconds) */
+#define FC_DEFAULT_BSG_TIMEOUT		(10 * HZ)
+
+
+/*
+ * Request Message Codes supported by the FC Transport
+ */
+
+/* define the class masks for the message codes */
+#define FC_BSG_CLS_MASK		0xF0000000	/* find object class */
+#define FC_BSG_HST_MASK		0x80000000	/* fc host class */
+#define FC_BSG_RPT_MASK		0x40000000	/* fc rport class */
+
+	/* fc_host Message Codes */
+#define FC_BSG_HST_ADD_RPORT		(FC_BSG_HST_MASK | 0x00000001)
+#define FC_BSG_HST_DEL_RPORT		(FC_BSG_HST_MASK | 0x00000002)
+#define FC_BSG_HST_ELS_NOLOGIN		(FC_BSG_HST_MASK | 0x00000003)
+#define FC_BSG_HST_CT			(FC_BSG_HST_MASK | 0x00000004)
+#define FC_BSG_HST_VENDOR		(FC_BSG_HST_MASK | 0x000000FF)
+
+	/* fc_rport Message Codes */
+#define FC_BSG_RPT_ELS			(FC_BSG_RPT_MASK | 0x00000001)
+#define FC_BSG_RPT_CT			(FC_BSG_RPT_MASK | 0x00000002)
+
+
+
+/*
+ * FC Address Identifiers in Message Structures :
+ *
+ *   Whenever a command payload contains a FC Address Identifier
+ *   (aka port_id), the value is effectively in big-endian
+ *   order, thus the array elements are decoded as follows:
+ *     element [0] is bits 23:16 of the FC Address Identifier
+ *     element [1] is bits 15:8 of the FC Address Identifier
+ *     element [2] is bits 7:0 of the FC Address Identifier
+ */
+
+
+/*
+ * FC Host Messages
+ */
+
+/* FC_BSG_HST_ADDR_PORT : */
+
+/* Request:
+ * This message requests the FC host to login to the remote port
+ * at the specified N_Port_Id.  The remote port is to be enumerated
+ * with the transport upon completion of the login.
+ */
+struct fc_bsg_host_add_rport {
+	uint8_t		reserved;
+
+	/* FC Address Identier of the remote port to login to */
+	uint8_t		port_id[3];
+};
+
+/* Response:
+ * There is no additional response data - fc_bsg_reply->result is sufficient
+ */
+
+
+/* FC_BSG_HST_DEL_RPORT : */
+
+/* Request:
+ * This message requests the FC host to remove an enumerated
+ * remote port and to terminate the login to it.
+ *
+ * Note: The driver is free to reject this request if it desires to
+ * remain logged in with the remote port.
+ */
+struct fc_bsg_host_del_rport {
+	uint8_t		reserved;
+
+	/* FC Address Identier of the remote port to logout of */
+	uint8_t		port_id[3];
+};
+
+/* Response:
+ * There is no additional response data - fc_bsg_reply->result is sufficient
+ */
+
+
+/* FC_BSG_HST_ELS_NOLOGIN : */
+
+/* Request:
+ * This message requests the FC_Host to send an ELS to a specific
+ * N_Port_ID. The host does not need to log into the remote port,
+ * nor does it need to enumerate the rport for further traffic
+ * (although, the FC host is free to do so if it desires).
+ */
+struct fc_bsg_host_els {
+	/*
+	 * ELS Command Code being sent (must be the same as byte 0
+	 * of the payload)
+	 */
+	uint8_t 	command_code;
+
+	/* FC Address Identier of the remote port to send the ELS to */
+	uint8_t		port_id[3];
+};
+
+/* Response:
+ */
+/* fc_bsg_ctels_reply->status values */
+#define FC_CTELS_STATUS_OK	0x00000000
+#define FC_CTELS_STATUS_REJECT	0x00000001
+#define FC_CTELS_STATUS_P_RJT	0x00000002
+#define FC_CTELS_STATUS_F_RJT	0x00000003
+#define FC_CTELS_STATUS_P_BSY	0x00000004
+#define FC_CTELS_STATUS_F_BSY	0x00000006
+struct fc_bsg_ctels_reply {
+	/*
+	 * Note: An ELS LS_RJT may be reported in 2 ways:
+	 *  a) A status of FC_CTELS_STATUS_OK is returned. The caller
+	 *     is to look into the ELS receive payload to determine
+	 *     LS_ACC or LS_RJT (by contents of word 0). The reject
+	 *     data will be in word 1.
+	 *  b) A status of FC_CTELS_STATUS_REJECT is returned, The
+	 *     rjt_data field will contain valid data.
+	 *
+	 * Note: ELS LS_ACC is determined by an FC_CTELS_STATUS_OK, and
+	 *   the receive payload word 0 indicates LS_ACC
+	 *   (e.g. value is 0x02xxxxxx).
+	 *
+	 * Note: Similarly, a CT Reject may be reported in 2 ways:
+	 *  a) A status of FC_CTELS_STATUS_OK is returned. The caller
+	 *     is to look into the CT receive payload to determine
+	 *     Accept or Reject (by contents of word 2). The reject
+	 *     data will be in word 3.
+	 *  b) A status of FC_CTELS_STATUS_REJECT is returned, The
+	 *     rjt_data field will contain valid data.
+	 *
+	 * Note: x_RJT/BSY status will indicae that the rjt_data field
+	 *   is valid and contains the reason/explanation values.
+	 */
+	uint32_t	status;		/* See FC_CTELS_STATUS_xxx */
+
+	/* valid if status is not FC_CTELS_STATUS_OK */
+	struct	{
+		uint8_t	action;		/* fragment_id for CT REJECT */
+		uint8_t	reason_code;
+		uint8_t	reason_explanation;
+		uint8_t	vendor_unique;
+	} rjt_data;
+};
+
+
+/* FC_BSG_HST_CT : */
+
+/* Request:
+ * This message requests that a CT Request be performed with the
+ * indicated N_Port_ID. The driver is responsible for logging in with
+ * the fabric and/or N_Port_ID, etc as per FC rules. This request does
+ * not mandate that the driver must enumerate the destination in the
+ * transport. The driver is allowed to decide whether to enumerate it,
+ * and whether to tear it down after the request.
+ */
+struct fc_bsg_host_ct {
+	uint8_t		reserved;
+
+	/* FC Address Identier of the remote port to send the ELS to */
+	uint8_t		port_id[3];
+
+	/*
+	 * We need words 0-2 of the generic preamble for the LLD's
+	 */
+	uint32_t	preamble_word0;	/* revision & IN_ID */
+	uint32_t	preamble_word1;	/* GS_Type, GS_SubType, Options, Rsvd */
+	uint32_t	preamble_word2;	/* Cmd Code, Max Size */
+
+};
+/* Response:
+ *
+ * The reply structure is an fc_bsg_ctels_reply structure
+ */
+
+
+/* FC_BSG_HST_VENDOR : */
+
+/* Request:
+ * Note: When specifying vendor_id, be sure to read the Vendor Type and ID
+ *   formatting requirements specified in scsi_netlink.h
+ */
+struct fc_bsg_host_vendor {
+	/*
+	 * Identifies the vendor that the message is formatted for. This
+	 * should be the recipient of the message.
+	 */
+	uint64_t vendor_id;
+
+	/* start of vendor command area */
+	uint32_t vendor_cmd[0];
+};
+
+/* Response:
+ */
+struct fc_bsg_host_vendor_reply {
+	/* start of vendor response area */
+	uint32_t vendor_rsp[0];
+};
+
+
+
+/*
+ * FC Remote Port Messages
+ */
+
+/* FC_BSG_RPT_ELS : */
+
+/* Request:
+ * This message requests that an ELS be performed with the rport.
+ */
+struct fc_bsg_rport_els {
+	/*
+	 * ELS Command Code being sent (must be the same as
+	 * byte 0 of the payload)
+	 */
+	uint8_t els_code;
+};
+
+/* Response:
+ *
+ * The reply structure is an fc_bsg_ctels_reply structure
+ */
+
+
+/* FC_BSG_RPT_CT : */
+
+/* Request:
+ * This message requests that a CT Request be performed with the rport.
+ */
+struct fc_bsg_rport_ct {
+	/*
+	 * We need words 0-2 of the generic preamble for the LLD's
+	 */
+	uint32_t	preamble_word0;	/* revision & IN_ID */
+	uint32_t	preamble_word1;	/* GS_Type, GS_SubType, Options, Rsvd */
+	uint32_t	preamble_word2;	/* Cmd Code, Max Size */
+};
+/* Response:
+ *
+ * The reply structure is an fc_bsg_ctels_reply structure
+ */
+
+
+
+
+/* request (CDB) structure of the sg_io_v4 */
+struct fc_bsg_request {
+	uint32_t msgcode;
+	union {
+		struct fc_bsg_host_add_rport	h_addrport;
+		struct fc_bsg_host_del_rport	h_delrport;
+		struct fc_bsg_host_els		h_els;
+		struct fc_bsg_host_ct		h_ct;
+		struct fc_bsg_host_vendor	h_vendor;
+
+		struct fc_bsg_rport_els		r_els;
+		struct fc_bsg_rport_ct		r_ct;
+	} rqst_data;
+} __attribute__((packed));
+
+
+/* response (request sense data) structure of the sg_io_v4 */
+struct fc_bsg_reply {
+	/*
+	 * The completion result. Result exists in two forms:
+	 *  if negative, it is an -Exxx system errno value. There will
+	 *    be no further reply information supplied.
+	 *  else, it's the 4-byte scsi error result, with driver, host,
+	 *    msg and status fields. The per-msgcode reply structure
+	 *    will contain valid data.
+	 */
+	uint32_t result;
+
+	/* If there was reply_payload, how much was recevied ? */
+	uint32_t reply_payload_rcv_len;
+
+	union {
+		struct fc_bsg_host_vendor_reply		vendor_reply;
+
+		struct fc_bsg_ctels_reply		ctels_reply;
+	} reply_data;
+};
+
+
+#endif /* SCSI_BSG_FC_H */
+
diff --git a/include/scsi/scsi_bsg_iscsi.h b/include/scsi/scsi_bsg_iscsi.h
new file mode 100644
index 00000000..fd5689d4
--- /dev/null
+++ b/include/scsi/scsi_bsg_iscsi.h
@@ -0,0 +1,110 @@
+/*
+ *  iSCSI Transport BSG Interface
+ *
+ *  Copyright (C) 2009   James Smart, Emulex Corporation
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef SCSI_BSG_ISCSI_H
+#define SCSI_BSG_ISCSI_H
+
+/*
+ * This file intended to be included by both kernel and user space
+ */
+
+#include <scsi/scsi.h>
+
+/*
+ * iSCSI Transport SGIO v4 BSG Message Support
+ */
+
+/* Default BSG request timeout (in seconds) */
+#define ISCSI_DEFAULT_BSG_TIMEOUT      (10 * HZ)
+
+
+/*
+ * Request Message Codes supported by the iSCSI Transport
+ */
+
+/* define the class masks for the message codes */
+#define ISCSI_BSG_CLS_MASK     0xF0000000      /* find object class */
+#define ISCSI_BSG_HST_MASK     0x80000000      /* iscsi host class */
+
+/* iscsi host Message Codes */
+#define ISCSI_BSG_HST_VENDOR           (ISCSI_BSG_HST_MASK | 0x000000FF)
+
+
+/*
+ * iSCSI Host Messages
+ */
+
+/* ISCSI_BSG_HST_VENDOR : */
+
+/* Request:
+ * Note: When specifying vendor_id, be sure to read the Vendor Type and ID
+ *   formatting requirements specified in scsi_netlink.h
+ */
+struct iscsi_bsg_host_vendor {
+	/*
+	 * Identifies the vendor that the message is formatted for. This
+	 * should be the recipient of the message.
+	 */
+	uint64_t vendor_id;
+
+	/* start of vendor command area */
+	uint32_t vendor_cmd[0];
+};
+
+/* Response:
+ */
+struct iscsi_bsg_host_vendor_reply {
+	/* start of vendor response area */
+	uint32_t vendor_rsp[0];
+};
+
+
+/* request (CDB) structure of the sg_io_v4 */
+struct iscsi_bsg_request {
+	uint32_t msgcode;
+	union {
+		struct iscsi_bsg_host_vendor    h_vendor;
+	} rqst_data;
+} __attribute__((packed));
+
+
+/* response (request sense data) structure of the sg_io_v4 */
+struct iscsi_bsg_reply {
+	/*
+	 * The completion result. Result exists in two forms:
+	 * if negative, it is an -Exxx system errno value. There will
+	 * be no further reply information supplied.
+	 * else, it's the 4-byte scsi error result, with driver, host,
+	 * msg and status fields. The per-msgcode reply structure
+	 * will contain valid data.
+	 */
+	uint32_t result;
+
+	/* If there was reply_payload, how much was recevied ? */
+	uint32_t reply_payload_rcv_len;
+
+	union {
+		struct iscsi_bsg_host_vendor_reply      vendor_reply;
+	} reply_data;
+};
+
+
+#endif /* SCSI_BSG_ISCSI_H */
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
new file mode 100644
index 00000000..ac06cc59
--- /dev/null
+++ b/include/scsi/scsi_cmnd.h
@@ -0,0 +1,320 @@
+#ifndef _SCSI_SCSI_CMND_H
+#define _SCSI_SCSI_CMND_H
+
+#include <linux/dma-mapping.h>
+#include <linux/blkdev.h>
+#include <linux/list.h>
+#include <linux/types.h>
+#include <linux/timer.h>
+#include <linux/scatterlist.h>
+
+struct Scsi_Host;
+struct scsi_device;
+struct scsi_driver;
+
+/*
+ * MAX_COMMAND_SIZE is:
+ * The longest fixed-length SCSI CDB as per the SCSI standard.
+ * fixed-length means: commands that their size can be determined
+ * by their opcode and the CDB does not carry a length specifier, (unlike
+ * the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly
+ * true and the SCSI standard also defines extended commands and
+ * vendor specific commands that can be bigger than 16 bytes. The kernel
+ * will support these using the same infrastructure used for VARLEN CDB's.
+ * So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml
+ * supports without specifying a cmd_len by ULD's
+ */
+#define MAX_COMMAND_SIZE 16
+#if (MAX_COMMAND_SIZE > BLK_MAX_CDB)
+# error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB
+#endif
+
+struct scsi_data_buffer {
+	struct sg_table table;
+	unsigned length;
+	int resid;
+};
+
+/* embedded in scsi_cmnd */
+struct scsi_pointer {
+	char *ptr;		/* data pointer */
+	int this_residual;	/* left in this buffer */
+	struct scatterlist *buffer;	/* which buffer */
+	int buffers_residual;	/* how many buffers left */
+
+        dma_addr_t dma_handle;
+
+	volatile int Status;
+	volatile int Message;
+	volatile int have_data_in;
+	volatile int sent_command;
+	volatile int phase;
+};
+
+struct scsi_cmnd {
+	struct scsi_device *device;
+	struct list_head list;  /* scsi_cmnd participates in queue lists */
+	struct list_head eh_entry; /* entry for the host eh_cmd_q */
+	int eh_eflags;		/* Used by error handlr */
+
+	/*
+	 * A SCSI Command is assigned a nonzero serial_number before passed
+	 * to the driver's queue command function.  The serial_number is
+	 * cleared when scsi_done is entered indicating that the command
+	 * has been completed.  It is a bug for LLDDs to use this number
+	 * for purposes other than printk (and even that is only useful
+	 * for debugging).
+	 */
+	unsigned long serial_number;
+
+	/*
+	 * This is set to jiffies as it was when the command was first
+	 * allocated.  It is used to time how long the command has
+	 * been outstanding
+	 */
+	unsigned long jiffies_at_alloc;
+
+	int retries;
+	int allowed;
+
+	unsigned char prot_op;
+	unsigned char prot_type;
+
+	unsigned short cmd_len;
+	enum dma_data_direction sc_data_direction;
+
+	/* These elements define the operation we are about to perform */
+	unsigned char *cmnd;
+
+
+	/* These elements define the operation we ultimately want to perform */
+	struct scsi_data_buffer sdb;
+	struct scsi_data_buffer *prot_sdb;
+
+	unsigned underflow;	/* Return error if less than
+				   this amount is transferred */
+
+	unsigned transfersize;	/* How much we are guaranteed to
+				   transfer with each SCSI transfer
+				   (ie, between disconnect / 
+				   reconnects.   Probably == sector
+				   size */
+
+	struct request *request;	/* The command we are
+				   	   working on */
+
+#define SCSI_SENSE_BUFFERSIZE 	96
+	unsigned char *sense_buffer;
+				/* obtained by REQUEST SENSE when
+				 * CHECK CONDITION is received on original
+				 * command (auto-sense) */
+
+	/* Low-level done function - can be used by low-level driver to point
+	 *        to completion function.  Not used by mid/upper level code. */
+	void (*scsi_done) (struct scsi_cmnd *);
+
+	/*
+	 * The following fields can be written to by the host specific code. 
+	 * Everything else should be left alone. 
+	 */
+	struct scsi_pointer SCp;	/* Scratchpad used by some host adapters */
+
+	unsigned char *host_scribble;	/* The host adapter is allowed to
+					 * call scsi_malloc and get some memory
+					 * and hang it here.  The host adapter
+					 * is also expected to call scsi_free
+					 * to release this memory.  (The memory
+					 * obtained by scsi_malloc is guaranteed
+					 * to be at an address < 16Mb). */
+
+	int result;		/* Status code from lower level driver */
+
+	unsigned char tag;	/* SCSI-II queued command tag */
+};
+
+static inline struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd)
+{
+	struct scsi_driver **sdp;
+
+	if (!cmd->request->rq_disk)
+		return NULL;
+
+	sdp = (struct scsi_driver **)cmd->request->rq_disk->private_data;
+	if (!sdp)
+		return NULL;
+
+	return *sdp;
+}
+
+extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, gfp_t);
+extern struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *, gfp_t);
+extern void scsi_put_command(struct scsi_cmnd *);
+extern void __scsi_put_command(struct Scsi_Host *, struct scsi_cmnd *,
+			       struct device *);
+extern void scsi_finish_command(struct scsi_cmnd *cmd);
+
+extern void *scsi_kmap_atomic_sg(struct scatterlist *sg, int sg_count,
+				 size_t *offset, size_t *len);
+extern void scsi_kunmap_atomic_sg(void *virt);
+
+extern int scsi_init_io(struct scsi_cmnd *cmd, gfp_t gfp_mask);
+extern void scsi_release_buffers(struct scsi_cmnd *cmd);
+
+extern int scsi_dma_map(struct scsi_cmnd *cmd);
+extern void scsi_dma_unmap(struct scsi_cmnd *cmd);
+
+struct scsi_cmnd *scsi_allocate_command(gfp_t gfp_mask);
+void scsi_free_command(gfp_t gfp_mask, struct scsi_cmnd *cmd);
+
+static inline unsigned scsi_sg_count(struct scsi_cmnd *cmd)
+{
+	return cmd->sdb.table.nents;
+}
+
+static inline struct scatterlist *scsi_sglist(struct scsi_cmnd *cmd)
+{
+	return cmd->sdb.table.sgl;
+}
+
+static inline unsigned scsi_bufflen(struct scsi_cmnd *cmd)
+{
+	return cmd->sdb.length;
+}
+
+static inline void scsi_set_resid(struct scsi_cmnd *cmd, int resid)
+{
+	cmd->sdb.resid = resid;
+}
+
+static inline int scsi_get_resid(struct scsi_cmnd *cmd)
+{
+	return cmd->sdb.resid;
+}
+
+#define scsi_for_each_sg(cmd, sg, nseg, __i)			\
+	for_each_sg(scsi_sglist(cmd), sg, nseg, __i)
+
+static inline int scsi_bidi_cmnd(struct scsi_cmnd *cmd)
+{
+	return blk_bidi_rq(cmd->request) &&
+		(cmd->request->next_rq->special != NULL);
+}
+
+static inline struct scsi_data_buffer *scsi_in(struct scsi_cmnd *cmd)
+{
+	return scsi_bidi_cmnd(cmd) ?
+		cmd->request->next_rq->special : &cmd->sdb;
+}
+
+static inline struct scsi_data_buffer *scsi_out(struct scsi_cmnd *cmd)
+{
+	return &cmd->sdb;
+}
+
+static inline int scsi_sg_copy_from_buffer(struct scsi_cmnd *cmd,
+					   void *buf, int buflen)
+{
+	return sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd),
+				   buf, buflen);
+}
+
+static inline int scsi_sg_copy_to_buffer(struct scsi_cmnd *cmd,
+					 void *buf, int buflen)
+{
+	return sg_copy_to_buffer(scsi_sglist(cmd), scsi_sg_count(cmd),
+				 buf, buflen);
+}
+
+/*
+ * The operations below are hints that tell the controller driver how
+ * to handle I/Os with DIF or similar types of protection information.
+ */
+enum scsi_prot_operations {
+	/* Normal I/O */
+	SCSI_PROT_NORMAL = 0,
+
+	/* OS-HBA: Protected, HBA-Target: Unprotected */
+	SCSI_PROT_READ_INSERT,
+	SCSI_PROT_WRITE_STRIP,
+
+	/* OS-HBA: Unprotected, HBA-Target: Protected */
+	SCSI_PROT_READ_STRIP,
+	SCSI_PROT_WRITE_INSERT,
+
+	/* OS-HBA: Protected, HBA-Target: Protected */
+	SCSI_PROT_READ_PASS,
+	SCSI_PROT_WRITE_PASS,
+};
+
+static inline void scsi_set_prot_op(struct scsi_cmnd *scmd, unsigned char op)
+{
+	scmd->prot_op = op;
+}
+
+static inline unsigned char scsi_get_prot_op(struct scsi_cmnd *scmd)
+{
+	return scmd->prot_op;
+}
+
+/*
+ * The controller usually does not know anything about the target it
+ * is communicating with.  However, when DIX is enabled the controller
+ * must be know target type so it can verify the protection
+ * information passed along with the I/O.
+ */
+enum scsi_prot_target_type {
+	SCSI_PROT_DIF_TYPE0 = 0,
+	SCSI_PROT_DIF_TYPE1,
+	SCSI_PROT_DIF_TYPE2,
+	SCSI_PROT_DIF_TYPE3,
+};
+
+static inline void scsi_set_prot_type(struct scsi_cmnd *scmd, unsigned char type)
+{
+	scmd->prot_type = type;
+}
+
+static inline unsigned char scsi_get_prot_type(struct scsi_cmnd *scmd)
+{
+	return scmd->prot_type;
+}
+
+static inline sector_t scsi_get_lba(struct scsi_cmnd *scmd)
+{
+	return blk_rq_pos(scmd->request);
+}
+
+static inline unsigned scsi_prot_sg_count(struct scsi_cmnd *cmd)
+{
+	return cmd->prot_sdb ? cmd->prot_sdb->table.nents : 0;
+}
+
+static inline struct scatterlist *scsi_prot_sglist(struct scsi_cmnd *cmd)
+{
+	return cmd->prot_sdb ? cmd->prot_sdb->table.sgl : NULL;
+}
+
+static inline struct scsi_data_buffer *scsi_prot(struct scsi_cmnd *cmd)
+{
+	return cmd->prot_sdb;
+}
+
+#define scsi_for_each_prot_sg(cmd, sg, nseg, __i)		\
+	for_each_sg(scsi_prot_sglist(cmd), sg, nseg, __i)
+
+static inline void set_msg_byte(struct scsi_cmnd *cmd, char status)
+{
+	cmd->result = (cmd->result & 0xffff00ff) | (status << 8);
+}
+
+static inline void set_host_byte(struct scsi_cmnd *cmd, char status)
+{
+	cmd->result = (cmd->result & 0xff00ffff) | (status << 16);
+}
+
+static inline void set_driver_byte(struct scsi_cmnd *cmd, char status)
+{
+	cmd->result = (cmd->result & 0x00ffffff) | (status << 24);
+}
+
+#endif /* _SCSI_SCSI_CMND_H */
diff --git a/include/scsi/scsi_dbg.h b/include/scsi/scsi_dbg.h
new file mode 100644
index 00000000..e89844cc
--- /dev/null
+++ b/include/scsi/scsi_dbg.h
@@ -0,0 +1,24 @@
+#ifndef _SCSI_SCSI_DBG_H
+#define _SCSI_SCSI_DBG_H
+
+struct scsi_cmnd;
+struct scsi_sense_hdr;
+
+extern void scsi_print_command(struct scsi_cmnd *);
+extern void __scsi_print_command(unsigned char *);
+extern void scsi_show_extd_sense(unsigned char, unsigned char);
+extern void scsi_show_sense_hdr(struct scsi_sense_hdr *);
+extern void scsi_print_sense_hdr(const char *, struct scsi_sense_hdr *);
+extern void scsi_cmd_print_sense_hdr(struct scsi_cmnd *, const char *,
+				     struct scsi_sense_hdr *);
+extern void scsi_print_sense(char *, struct scsi_cmnd *);
+extern void __scsi_print_sense(const char *name,
+			       const unsigned char *sense_buffer,
+			       int sense_len);
+extern void scsi_show_result(int);
+extern void scsi_print_result(struct scsi_cmnd *);
+extern void scsi_print_status(unsigned char);
+extern const char *scsi_sense_key_string(unsigned char);
+extern const char *scsi_extd_sense_format(unsigned char, unsigned char);
+
+#endif /* _SCSI_SCSI_DBG_H */
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
new file mode 100644
index 00000000..ba969885
--- /dev/null
+++ b/include/scsi/scsi_device.h
@@ -0,0 +1,487 @@
+#ifndef _SCSI_SCSI_DEVICE_H
+#define _SCSI_SCSI_DEVICE_H
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/blkdev.h>
+#include <scsi/scsi.h>
+#include <linux/atomic.h>
+
+struct device;
+struct request_queue;
+struct scsi_cmnd;
+struct scsi_lun;
+struct scsi_sense_hdr;
+
+struct scsi_mode_data {
+	__u32	length;
+	__u16	block_descriptor_length;
+	__u8	medium_type;
+	__u8	device_specific;
+	__u8	header_length;
+	__u8	longlba:1;
+};
+
+/*
+ * sdev state: If you alter this, you also need to alter scsi_sysfs.c
+ * (for the ascii descriptions) and the state model enforcer:
+ * scsi_lib:scsi_device_set_state().
+ */
+enum scsi_device_state {
+	SDEV_CREATED = 1,	/* device created but not added to sysfs
+				 * Only internal commands allowed (for inq) */
+	SDEV_RUNNING,		/* device properly configured
+				 * All commands allowed */
+	SDEV_CANCEL,		/* beginning to delete device
+				 * Only error handler commands allowed */
+	SDEV_DEL,		/* device deleted 
+				 * no commands allowed */
+	SDEV_QUIESCE,		/* Device quiescent.  No block commands
+				 * will be accepted, only specials (which
+				 * originate in the mid-layer) */
+	SDEV_OFFLINE,		/* Device offlined (by error handling or
+				 * user request */
+	SDEV_BLOCK,		/* Device blocked by scsi lld.  No
+				 * scsi commands from user or midlayer
+				 * should be issued to the scsi
+				 * lld. */
+	SDEV_CREATED_BLOCK,	/* same as above but for created devices */
+};
+
+enum scsi_device_event {
+	SDEV_EVT_MEDIA_CHANGE	= 1,	/* media has changed */
+
+	SDEV_EVT_LAST		= SDEV_EVT_MEDIA_CHANGE,
+	SDEV_EVT_MAXBITS	= SDEV_EVT_LAST + 1
+};
+
+struct scsi_event {
+	enum scsi_device_event	evt_type;
+	struct list_head	node;
+
+	/* put union of data structures, for non-simple event types,
+	 * here
+	 */
+};
+
+struct scsi_device {
+	struct Scsi_Host *host;
+	struct request_queue *request_queue;
+
+	/* the next two are protected by the host->host_lock */
+	struct list_head    siblings;   /* list of all devices on this host */
+	struct list_head    same_target_siblings; /* just the devices sharing same target id */
+
+	/* this is now protected by the request_queue->queue_lock */
+	unsigned int device_busy;	/* commands actually active on
+					 * low-level. protected by queue_lock. */
+	spinlock_t list_lock;
+	struct list_head cmd_list;	/* queue of in use SCSI Command structures */
+	struct list_head starved_entry;
+	struct scsi_cmnd *current_cmnd;	/* currently active command */
+	unsigned short queue_depth;	/* How deep of a queue we want */
+	unsigned short max_queue_depth;	/* max queue depth */
+	unsigned short last_queue_full_depth; /* These two are used by */
+	unsigned short last_queue_full_count; /* scsi_track_queue_full() */
+	unsigned long last_queue_full_time;	/* last queue full time */
+	unsigned long queue_ramp_up_period;	/* ramp up period in jiffies */
+#define SCSI_DEFAULT_RAMP_UP_PERIOD	(120 * HZ)
+
+	unsigned long last_queue_ramp_up;	/* last queue ramp up time */
+
+	unsigned int id, lun, channel;
+
+	unsigned int manufacturer;	/* Manufacturer of device, for using 
+					 * vendor-specific cmd's */
+	unsigned sector_size;	/* size in bytes */
+
+	void *hostdata;		/* available to low-level driver */
+	char type;
+	char scsi_level;
+	char inq_periph_qual;	/* PQ from INQUIRY data */	
+	unsigned char inquiry_len;	/* valid bytes in 'inquiry' */
+	unsigned char * inquiry;	/* INQUIRY response data */
+	const char * vendor;		/* [back_compat] point into 'inquiry' ... */
+	const char * model;		/* ... after scan; point to static string */
+	const char * rev;		/* ... "nullnullnullnull" before scan */
+	unsigned char current_tag;	/* current tag */
+	struct scsi_target      *sdev_target;   /* used only for single_lun */
+
+	unsigned int	sdev_bflags; /* black/white flags as also found in
+				 * scsi_devinfo.[hc]. For now used only to
+				 * pass settings from slave_alloc to scsi
+				 * core. */
+	unsigned writeable:1;
+	unsigned removable:1;
+	unsigned changed:1;	/* Data invalid due to media change */
+	unsigned busy:1;	/* Used to prevent races */
+	unsigned lockable:1;	/* Able to prevent media removal */
+	unsigned locked:1;      /* Media removal disabled */
+	unsigned borken:1;	/* Tell the Seagate driver to be 
+				 * painfully slow on this device */
+	unsigned disconnect:1;	/* can disconnect */
+	unsigned soft_reset:1;	/* Uses soft reset option */
+	unsigned sdtr:1;	/* Device supports SDTR messages */
+	unsigned wdtr:1;	/* Device supports WDTR messages */
+	unsigned ppr:1;		/* Device supports PPR messages */
+	unsigned tagged_supported:1;	/* Supports SCSI-II tagged queuing */
+	unsigned simple_tags:1;	/* simple queue tag messages are enabled */
+	unsigned ordered_tags:1;/* ordered queue tag messages are enabled */
+	unsigned was_reset:1;	/* There was a bus reset on the bus for 
+				 * this device */
+	unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN
+				     * because we did a bus reset. */
+	unsigned use_10_for_rw:1; /* first try 10-byte read / write */
+	unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
+	unsigned skip_ms_page_8:1;	/* do not use MODE SENSE page 0x08 */
+	unsigned skip_ms_page_3f:1;	/* do not use MODE SENSE page 0x3f */
+	unsigned skip_vpd_pages:1;	/* do not read VPD pages */
+	unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
+	unsigned no_start_on_add:1;	/* do not issue start on add */
+	unsigned allow_restart:1; /* issue START_UNIT in error handler */
+	unsigned manage_start_stop:1;	/* Let HLD (sd) manage start/stop */
+	unsigned start_stop_pwr_cond:1;	/* Set power cond. in START_STOP_UNIT */
+	unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
+	unsigned select_no_atn:1;
+	unsigned fix_capacity:1;	/* READ_CAPACITY is too high by 1 */
+	unsigned guess_capacity:1;	/* READ_CAPACITY might be too high by 1 */
+	unsigned retry_hwerror:1;	/* Retry HARDWARE_ERROR */
+	unsigned last_sector_bug:1;	/* do not use multisector accesses on
+					   SD_LAST_BUGGY_SECTORS */
+	unsigned no_read_disc_info:1;	/* Avoid READ_DISC_INFO cmds */
+	unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */
+	unsigned try_rc_10_first:1;	/* Try READ_CAPACACITY_10 first */
+	unsigned is_visible:1;	/* is the device visible in sysfs */
+
+	DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
+	struct list_head event_list;	/* asserted events */
+	struct work_struct event_work;
+
+	unsigned int device_blocked;	/* Device returned QUEUE_FULL. */
+
+	unsigned int max_device_blocked; /* what device_blocked counts down from  */
+#define SCSI_DEFAULT_DEVICE_BLOCKED	3
+
+	atomic_t iorequest_cnt;
+	atomic_t iodone_cnt;
+	atomic_t ioerr_cnt;
+
+	struct device		sdev_gendev,
+				sdev_dev;
+
+	struct execute_work	ew; /* used to get process context on put */
+	struct work_struct	requeue_work;
+
+	struct scsi_dh_data	*scsi_dh_data;
+	enum scsi_device_state sdev_state;
+	unsigned long		sdev_data[0];
+} __attribute__((aligned(sizeof(unsigned long))));
+
+struct scsi_dh_devlist {
+	char *vendor;
+	char *model;
+};
+
+typedef void (*activate_complete)(void *, int);
+struct scsi_device_handler {
+	/* Used by the infrastructure */
+	struct list_head list; /* list of scsi_device_handlers */
+
+	/* Filled by the hardware handler */
+	struct module *module;
+	const char *name;
+	const struct scsi_dh_devlist *devlist;
+	int (*check_sense)(struct scsi_device *, struct scsi_sense_hdr *);
+	int (*attach)(struct scsi_device *);
+	void (*detach)(struct scsi_device *);
+	int (*activate)(struct scsi_device *, activate_complete, void *);
+	int (*prep_fn)(struct scsi_device *, struct request *);
+	int (*set_params)(struct scsi_device *, const char *);
+	bool (*match)(struct scsi_device *);
+};
+
+struct scsi_dh_data {
+	struct scsi_device_handler *scsi_dh;
+	struct scsi_device *sdev;
+	struct kref kref;
+	char buf[0];
+};
+
+#define	to_scsi_device(d)	\
+	container_of(d, struct scsi_device, sdev_gendev)
+#define	class_to_sdev(d)	\
+	container_of(d, struct scsi_device, sdev_dev)
+#define transport_class_to_sdev(class_dev) \
+	to_scsi_device(class_dev->parent)
+
+#define sdev_printk(prefix, sdev, fmt, a...)	\
+	dev_printk(prefix, &(sdev)->sdev_gendev, fmt, ##a)
+
+#define scmd_printk(prefix, scmd, fmt, a...)				\
+        (scmd)->request->rq_disk ?					\
+	sdev_printk(prefix, (scmd)->device, "[%s] " fmt,		\
+		    (scmd)->request->rq_disk->disk_name, ##a) :		\
+	sdev_printk(prefix, (scmd)->device, fmt, ##a)
+
+enum scsi_target_state {
+	STARGET_CREATED = 1,
+	STARGET_RUNNING,
+	STARGET_DEL,
+};
+
+/*
+ * scsi_target: representation of a scsi target, for now, this is only
+ * used for single_lun devices. If no one has active IO to the target,
+ * starget_sdev_user is NULL, else it points to the active sdev.
+ */
+struct scsi_target {
+	struct scsi_device	*starget_sdev_user;
+	struct list_head	siblings;
+	struct list_head	devices;
+	struct device		dev;
+	unsigned int		reap_ref; /* protected by the host lock */
+	unsigned int		channel;
+	unsigned int		id; /* target id ... replace
+				     * scsi_device.id eventually */
+	unsigned int		create:1; /* signal that it needs to be added */
+	unsigned int		single_lun:1;	/* Indicates we should only
+						 * allow I/O to one of the luns
+						 * for the device at a time. */
+	unsigned int		pdt_1f_for_no_lun:1;	/* PDT = 0x1f
+						 * means no lun present. */
+	unsigned int		no_report_luns:1;	/* Don't use
+						 * REPORT LUNS for scanning. */
+	/* commands actually active on LLD. protected by host lock. */
+	unsigned int		target_busy;
+	/*
+	 * LLDs should set this in the slave_alloc host template callout.
+	 * If set to zero then there is not limit.
+	 */
+	unsigned int		can_queue;
+	unsigned int		target_blocked;
+	unsigned int		max_target_blocked;
+#define SCSI_DEFAULT_TARGET_BLOCKED	3
+
+	char			scsi_level;
+	struct execute_work	ew;
+	enum scsi_target_state	state;
+	void 			*hostdata; /* available to low-level driver */
+	unsigned long		starget_data[0]; /* for the transport */
+	/* starget_data must be the last element!!!! */
+} __attribute__((aligned(sizeof(unsigned long))));
+
+#define to_scsi_target(d)	container_of(d, struct scsi_target, dev)
+static inline struct scsi_target *scsi_target(struct scsi_device *sdev)
+{
+	return to_scsi_target(sdev->sdev_gendev.parent);
+}
+#define transport_class_to_starget(class_dev) \
+	to_scsi_target(class_dev->parent)
+
+#define starget_printk(prefix, starget, fmt, a...)	\
+	dev_printk(prefix, &(starget)->dev, fmt, ##a)
+
+extern struct scsi_device *__scsi_add_device(struct Scsi_Host *,
+		uint, uint, uint, void *hostdata);
+extern int scsi_add_device(struct Scsi_Host *host, uint channel,
+			   uint target, uint lun);
+extern int scsi_register_device_handler(struct scsi_device_handler *scsi_dh);
+extern void scsi_remove_device(struct scsi_device *);
+extern int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh);
+
+extern int scsi_device_get(struct scsi_device *);
+extern void scsi_device_put(struct scsi_device *);
+extern struct scsi_device *scsi_device_lookup(struct Scsi_Host *,
+					      uint, uint, uint);
+extern struct scsi_device *__scsi_device_lookup(struct Scsi_Host *,
+						uint, uint, uint);
+extern struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *,
+							uint);
+extern struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *,
+							  uint);
+extern void starget_for_each_device(struct scsi_target *, void *,
+		     void (*fn)(struct scsi_device *, void *));
+extern void __starget_for_each_device(struct scsi_target *, void *,
+				      void (*fn)(struct scsi_device *,
+						 void *));
+
+/* only exposed to implement shost_for_each_device */
+extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *,
+						  struct scsi_device *);
+
+/**
+ * shost_for_each_device - iterate over all devices of a host
+ * @sdev: the &struct scsi_device to use as a cursor
+ * @shost: the &struct scsi_host to iterate over
+ *
+ * Iterator that returns each device attached to @shost.  This loop
+ * takes a reference on each device and releases it at the end.  If
+ * you break out of the loop, you must call scsi_device_put(sdev).
+ */
+#define shost_for_each_device(sdev, shost) \
+	for ((sdev) = __scsi_iterate_devices((shost), NULL); \
+	     (sdev); \
+	     (sdev) = __scsi_iterate_devices((shost), (sdev)))
+
+/**
+ * __shost_for_each_device - iterate over all devices of a host (UNLOCKED)
+ * @sdev: the &struct scsi_device to use as a cursor
+ * @shost: the &struct scsi_host to iterate over
+ *
+ * Iterator that returns each device attached to @shost.  It does _not_
+ * take a reference on the scsi_device, so the whole loop must be
+ * protected by shost->host_lock.
+ *
+ * Note: The only reason to use this is because you need to access the
+ * device list in interrupt context.  Otherwise you really want to use
+ * shost_for_each_device instead.
+ */
+#define __shost_for_each_device(sdev, shost) \
+	list_for_each_entry((sdev), &((shost)->__devices), siblings)
+
+extern void scsi_adjust_queue_depth(struct scsi_device *, int, int);
+extern int scsi_track_queue_full(struct scsi_device *, int);
+
+extern int scsi_set_medium_removal(struct scsi_device *, char);
+
+extern int scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
+			   unsigned char *buffer, int len, int timeout,
+			   int retries, struct scsi_mode_data *data,
+			   struct scsi_sense_hdr *);
+extern int scsi_mode_select(struct scsi_device *sdev, int pf, int sp,
+			    int modepage, unsigned char *buffer, int len,
+			    int timeout, int retries,
+			    struct scsi_mode_data *data,
+			    struct scsi_sense_hdr *);
+extern int scsi_test_unit_ready(struct scsi_device *sdev, int timeout,
+				int retries, struct scsi_sense_hdr *sshdr);
+extern int scsi_get_vpd_page(struct scsi_device *, u8 page, unsigned char *buf,
+			     int buf_len);
+extern int scsi_device_set_state(struct scsi_device *sdev,
+				 enum scsi_device_state state);
+extern struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type,
+					  gfp_t gfpflags);
+extern void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt);
+extern void sdev_evt_send_simple(struct scsi_device *sdev,
+			  enum scsi_device_event evt_type, gfp_t gfpflags);
+extern int scsi_device_quiesce(struct scsi_device *sdev);
+extern void scsi_device_resume(struct scsi_device *sdev);
+extern void scsi_target_quiesce(struct scsi_target *);
+extern void scsi_target_resume(struct scsi_target *);
+extern void scsi_scan_target(struct device *parent, unsigned int channel,
+			     unsigned int id, unsigned int lun, int rescan);
+extern void scsi_target_reap(struct scsi_target *);
+extern void scsi_target_block(struct device *);
+extern void scsi_target_unblock(struct device *);
+extern void scsi_remove_target(struct device *);
+extern void int_to_scsilun(unsigned int, struct scsi_lun *);
+extern int scsilun_to_int(struct scsi_lun *);
+extern const char *scsi_device_state_name(enum scsi_device_state);
+extern int scsi_is_sdev_device(const struct device *);
+extern int scsi_is_target_device(const struct device *);
+extern int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
+			int data_direction, void *buffer, unsigned bufflen,
+			unsigned char *sense, int timeout, int retries,
+			int flag, int *resid);
+extern int scsi_execute_req(struct scsi_device *sdev, const unsigned char *cmd,
+			    int data_direction, void *buffer, unsigned bufflen,
+			    struct scsi_sense_hdr *, int timeout, int retries,
+			    int *resid);
+
+#ifdef CONFIG_PM_RUNTIME
+extern int scsi_autopm_get_device(struct scsi_device *);
+extern void scsi_autopm_put_device(struct scsi_device *);
+#else
+static inline int scsi_autopm_get_device(struct scsi_device *d) { return 0; }
+static inline void scsi_autopm_put_device(struct scsi_device *d) {}
+#endif /* CONFIG_PM_RUNTIME */
+
+static inline int __must_check scsi_device_reprobe(struct scsi_device *sdev)
+{
+	return device_reprobe(&sdev->sdev_gendev);
+}
+
+static inline unsigned int sdev_channel(struct scsi_device *sdev)
+{
+	return sdev->channel;
+}
+
+static inline unsigned int sdev_id(struct scsi_device *sdev)
+{
+	return sdev->id;
+}
+
+#define scmd_id(scmd) sdev_id((scmd)->device)
+#define scmd_channel(scmd) sdev_channel((scmd)->device)
+
+/*
+ * checks for positions of the SCSI state machine
+ */
+static inline int scsi_device_online(struct scsi_device *sdev)
+{
+	return (sdev->sdev_state != SDEV_OFFLINE &&
+		sdev->sdev_state != SDEV_DEL);
+}
+static inline int scsi_device_blocked(struct scsi_device *sdev)
+{
+	return sdev->sdev_state == SDEV_BLOCK ||
+		sdev->sdev_state == SDEV_CREATED_BLOCK;
+}
+static inline int scsi_device_created(struct scsi_device *sdev)
+{
+	return sdev->sdev_state == SDEV_CREATED ||
+		sdev->sdev_state == SDEV_CREATED_BLOCK;
+}
+
+/* accessor functions for the SCSI parameters */
+static inline int scsi_device_sync(struct scsi_device *sdev)
+{
+	return sdev->sdtr;
+}
+static inline int scsi_device_wide(struct scsi_device *sdev)
+{
+	return sdev->wdtr;
+}
+static inline int scsi_device_dt(struct scsi_device *sdev)
+{
+	return sdev->ppr;
+}
+static inline int scsi_device_dt_only(struct scsi_device *sdev)
+{
+	if (sdev->inquiry_len < 57)
+		return 0;
+	return (sdev->inquiry[56] & 0x0c) == 0x04;
+}
+static inline int scsi_device_ius(struct scsi_device *sdev)
+{
+	if (sdev->inquiry_len < 57)
+		return 0;
+	return sdev->inquiry[56] & 0x01;
+}
+static inline int scsi_device_qas(struct scsi_device *sdev)
+{
+	if (sdev->inquiry_len < 57)
+		return 0;
+	return sdev->inquiry[56] & 0x02;
+}
+static inline int scsi_device_enclosure(struct scsi_device *sdev)
+{
+	return sdev->inquiry ? (sdev->inquiry[6] & (1<<6)) : 1;
+}
+
+static inline int scsi_device_protection(struct scsi_device *sdev)
+{
+	return sdev->scsi_level > SCSI_2 && sdev->inquiry[5] & (1<<0);
+}
+
+static inline int scsi_device_tpgs(struct scsi_device *sdev)
+{
+	return sdev->inquiry ? (sdev->inquiry[5] >> 4) & 0x3 : 0;
+}
+
+#define MODULE_ALIAS_SCSI_DEVICE(type) \
+	MODULE_ALIAS("scsi:t-" __stringify(type) "*")
+#define SCSI_DEVICE_MODALIAS_FMT "scsi:t-0x%02x"
+
+#endif /* _SCSI_SCSI_DEVICE_H */
diff --git a/include/scsi/scsi_devinfo.h b/include/scsi/scsi_devinfo.h
new file mode 100644
index 00000000..b4ddd3b1
--- /dev/null
+++ b/include/scsi/scsi_devinfo.h
@@ -0,0 +1,33 @@
+#ifndef _SCSI_SCSI_DEVINFO_H
+#define _SCSI_SCSI_DEVINFO_H
+/*
+ * Flags for SCSI devices that need special treatment
+ */
+#define BLIST_NOLUN     	0x001	/* Only scan LUN 0 */
+#define BLIST_FORCELUN  	0x002	/* Known to have LUNs, force scanning,
+					   deprecated: Use max_luns=N */
+#define BLIST_BORKEN    	0x004	/* Flag for broken handshaking */
+#define BLIST_KEY       	0x008	/* unlock by special command */
+#define BLIST_SINGLELUN 	0x010	/* Do not use LUNs in parallel */
+#define BLIST_NOTQ		0x020	/* Buggy Tagged Command Queuing */
+#define BLIST_SPARSELUN 	0x040	/* Non consecutive LUN numbering */
+#define BLIST_MAX5LUN		0x080	/* Avoid LUNS >= 5 */
+#define BLIST_ISROM     	0x100	/* Treat as (removable) CD-ROM */
+#define BLIST_LARGELUN		0x200	/* LUNs past 7 on a SCSI-2 device */
+#define BLIST_INQUIRY_36	0x400	/* override additional length field */
+#define BLIST_INQUIRY_58	0x800	/* ... for broken inquiry responses */
+#define BLIST_NOSTARTONADD	0x1000	/* do not do automatic start on add */
+#define BLIST_MS_SKIP_PAGE_08	0x2000	/* do not send ms page 0x08 */
+#define BLIST_MS_SKIP_PAGE_3F	0x4000	/* do not send ms page 0x3f */
+#define BLIST_USE_10_BYTE_MS	0x8000	/* use 10 byte ms before 6 byte ms */
+#define BLIST_MS_192_BYTES_FOR_3F	0x10000	/*  192 byte ms page 0x3f request */
+#define BLIST_REPORTLUN2	0x20000	/* try REPORT_LUNS even for SCSI-2 devs
+ 					   (if HBA supports more than 8 LUNs) */
+#define BLIST_NOREPORTLUN	0x40000	/* don't try REPORT_LUNS scan (SCSI-3 devs) */
+#define BLIST_NOT_LOCKABLE	0x80000	/* don't use PREVENT-ALLOW commands */
+#define BLIST_NO_ULD_ATTACH	0x100000 /* device is actually for RAID config */
+#define BLIST_SELECT_NO_ATN	0x200000 /* select without ATN */
+#define BLIST_RETRY_HWERROR	0x400000 /* retry HARDWARE_ERROR */
+#define BLIST_MAX_512		0x800000 /* maximum 512 sector cdb length */
+#define BLIST_ATTACH_PQ3	0x1000000 /* Scan: Attach to PQ3 devices */
+#endif
diff --git a/include/scsi/scsi_dh.h b/include/scsi/scsi_dh.h
new file mode 100644
index 00000000..e3f2db21
--- /dev/null
+++ b/include/scsi/scsi_dh.h
@@ -0,0 +1,87 @@
+/*
+ * Header file for SCSI device handler infrastruture.
+ *
+ * Modified version of patches posted by Mike Christie <michaelc@cs.wisc.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright IBM Corporation, 2007
+ *      Authors:
+ *               Chandra Seetharaman <sekharan@us.ibm.com>
+ *               Mike Anderson <andmike@linux.vnet.ibm.com>
+ */
+
+#include <scsi/scsi_device.h>
+
+enum {
+	SCSI_DH_OK = 0,
+	/*
+	 * device errors
+	 */
+	SCSI_DH_DEV_FAILED,	/* generic device error */
+	SCSI_DH_DEV_TEMP_BUSY,
+	SCSI_DH_DEV_UNSUPP,	/* device handler not supported */
+	SCSI_DH_DEVICE_MAX,	/* max device blkerr definition */
+
+	/*
+	 * transport errors
+	 */
+	SCSI_DH_NOTCONN = SCSI_DH_DEVICE_MAX + 1,
+	SCSI_DH_CONN_FAILURE,
+	SCSI_DH_TRANSPORT_MAX,	/* max transport blkerr definition */
+
+	/*
+	 * driver and generic errors
+	 */
+	SCSI_DH_IO = SCSI_DH_TRANSPORT_MAX + 1,	/* generic error */
+	SCSI_DH_INVALID_IO,
+	SCSI_DH_RETRY,		/* retry the req, but not immediately */
+	SCSI_DH_IMM_RETRY,	/* immediately retry the req */
+	SCSI_DH_TIMED_OUT,
+	SCSI_DH_RES_TEMP_UNAVAIL,
+	SCSI_DH_DEV_OFFLINED,
+	SCSI_DH_NOSYS,
+	SCSI_DH_DRIVER_MAX,
+};
+#if defined(CONFIG_SCSI_DH) || defined(CONFIG_SCSI_DH_MODULE)
+extern int scsi_dh_activate(struct request_queue *, activate_complete, void *);
+extern int scsi_dh_handler_exist(const char *);
+extern int scsi_dh_attach(struct request_queue *, const char *);
+extern void scsi_dh_detach(struct request_queue *);
+extern int scsi_dh_set_params(struct request_queue *, const char *);
+#else
+static inline int scsi_dh_activate(struct request_queue *req,
+					activate_complete fn, void *data)
+{
+	fn(data, 0);
+	return 0;
+}
+static inline int scsi_dh_handler_exist(const char *name)
+{
+	return 0;
+}
+static inline int scsi_dh_attach(struct request_queue *req, const char *name)
+{
+	return SCSI_DH_NOSYS;
+}
+static inline void scsi_dh_detach(struct request_queue *q)
+{
+	return;
+}
+static inline int scsi_dh_set_params(struct request_queue *req, const char *params)
+{
+	return -SCSI_DH_NOSYS;
+}
+#endif
diff --git a/include/scsi/scsi_driver.h b/include/scsi/scsi_driver.h
new file mode 100644
index 00000000..d443aa06
--- /dev/null
+++ b/include/scsi/scsi_driver.h
@@ -0,0 +1,38 @@
+#ifndef _SCSI_SCSI_DRIVER_H
+#define _SCSI_SCSI_DRIVER_H
+
+#include <linux/device.h>
+
+struct module;
+struct scsi_cmnd;
+struct scsi_device;
+struct request;
+struct request_queue;
+
+
+struct scsi_driver {
+	struct module		*owner;
+	struct device_driver	gendrv;
+
+	void (*rescan)(struct device *);
+	int (*done)(struct scsi_cmnd *);
+	int (*eh_action)(struct scsi_cmnd *, unsigned char *, int, int);
+};
+#define to_scsi_driver(drv) \
+	container_of((drv), struct scsi_driver, gendrv)
+
+extern int scsi_register_driver(struct device_driver *);
+#define scsi_unregister_driver(drv) \
+	driver_unregister(drv);
+
+extern int scsi_register_interface(struct class_interface *);
+#define scsi_unregister_interface(intf) \
+	class_interface_unregister(intf)
+
+int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req);
+int scsi_setup_fs_cmnd(struct scsi_device *sdev, struct request *req);
+int scsi_prep_state_check(struct scsi_device *sdev, struct request *req);
+int scsi_prep_return(struct request_queue *q, struct request *req, int ret);
+int scsi_prep_fn(struct request_queue *, struct request *);
+
+#endif /* _SCSI_SCSI_DRIVER_H */
diff --git a/include/scsi/scsi_eh.h b/include/scsi/scsi_eh.h
new file mode 100644
index 00000000..06a87908
--- /dev/null
+++ b/include/scsi/scsi_eh.h
@@ -0,0 +1,95 @@
+#ifndef _SCSI_SCSI_EH_H
+#define _SCSI_SCSI_EH_H
+
+#include <linux/scatterlist.h>
+
+#include <scsi/scsi_cmnd.h>
+struct scsi_device;
+struct Scsi_Host;
+
+/*
+ * This is a slightly modified SCSI sense "descriptor" format header.
+ * The addition is to allow the 0x70 and 0x71 response codes. The idea
+ * is to place the salient data from either "fixed" or "descriptor" sense
+ * format into one structure to ease application processing.
+ *
+ * The original sense buffer should be kept around for those cases
+ * in which more information is required (e.g. the LBA of a MEDIUM ERROR).
+ */
+struct scsi_sense_hdr {		/* See SPC-3 section 4.5 */
+	u8 response_code;	/* permit: 0x0, 0x70, 0x71, 0x72, 0x73 */
+	u8 sense_key;
+	u8 asc;
+	u8 ascq;
+	u8 byte4;
+	u8 byte5;
+	u8 byte6;
+	u8 additional_length;	/* always 0 for fixed sense format */
+};
+
+static inline int scsi_sense_valid(struct scsi_sense_hdr *sshdr)
+{
+	if (!sshdr)
+		return 0;
+
+	return (sshdr->response_code & 0x70) == 0x70;
+}
+
+
+extern void scsi_eh_finish_cmd(struct scsi_cmnd *scmd,
+			       struct list_head *done_q);
+extern void scsi_eh_flush_done_q(struct list_head *done_q);
+extern void scsi_report_bus_reset(struct Scsi_Host *, int);
+extern void scsi_report_device_reset(struct Scsi_Host *, int, int);
+extern int scsi_block_when_processing_errors(struct scsi_device *);
+extern int scsi_normalize_sense(const u8 *sense_buffer, int sb_len,
+		struct scsi_sense_hdr *sshdr);
+extern int scsi_command_normalize_sense(struct scsi_cmnd *cmd,
+		struct scsi_sense_hdr *sshdr);
+
+static inline int scsi_sense_is_deferred(struct scsi_sense_hdr *sshdr)
+{
+	return ((sshdr->response_code >= 0x70) && (sshdr->response_code & 1));
+}
+
+extern const u8 * scsi_sense_desc_find(const u8 * sense_buffer, int sb_len,
+				       int desc_type);
+
+extern int scsi_get_sense_info_fld(const u8 * sense_buffer, int sb_len,
+				   u64 * info_out);
+
+extern void scsi_build_sense_buffer(int desc, u8 *buf, u8 key, u8 asc, u8 ascq);
+
+/*
+ * Reset request from external source
+ */
+#define SCSI_TRY_RESET_DEVICE	1
+#define SCSI_TRY_RESET_BUS	2
+#define SCSI_TRY_RESET_HOST	3
+#define SCSI_TRY_RESET_TARGET	4
+
+extern int scsi_reset_provider(struct scsi_device *, int);
+
+struct scsi_eh_save {
+	/* saved state */
+	int result;
+	enum dma_data_direction data_direction;
+	unsigned underflow;
+	unsigned char cmd_len;
+	unsigned char prot_op;
+	unsigned char *cmnd;
+	struct scsi_data_buffer sdb;
+	struct request *next_rq;
+	/* new command support */
+	unsigned char eh_cmnd[BLK_MAX_CDB];
+	struct scatterlist sense_sgl;
+};
+
+extern void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd,
+		struct scsi_eh_save *ses, unsigned char *cmnd,
+		int cmnd_size, unsigned sense_bytes);
+
+extern void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd,
+		struct scsi_eh_save *ses);
+
+#endif /* _SCSI_SCSI_EH_H */
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
new file mode 100644
index 00000000..5f7d5b3b
--- /dev/null
+++ b/include/scsi/scsi_host.h
@@ -0,0 +1,921 @@
+#ifndef _SCSI_SCSI_HOST_H
+#define _SCSI_SCSI_HOST_H
+
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+#include <linux/mutex.h>
+#include <scsi/scsi.h>
+
+struct request_queue;
+struct block_device;
+struct completion;
+struct module;
+struct scsi_cmnd;
+struct scsi_device;
+struct scsi_target;
+struct Scsi_Host;
+struct scsi_host_cmd_pool;
+struct scsi_transport_template;
+struct blk_queue_tags;
+
+
+/*
+ * The various choices mean:
+ * NONE: Self evident.	Host adapter is not capable of scatter-gather.
+ * ALL:	 Means that the host adapter module can do scatter-gather,
+ *	 and that there is no limit to the size of the table to which
+ *	 we scatter/gather data.  The value we set here is the maximum
+ *	 single element sglist.  To use chained sglists, the adapter
+ *	 has to set a value beyond ALL (and correctly use the chain
+ *	 handling API.
+ * Anything else:  Indicates the maximum number of chains that can be
+ *	 used in one scatter-gather request.
+ */
+#define SG_NONE 0
+#define SG_ALL	SCSI_MAX_SG_SEGMENTS
+
+#define MODE_UNKNOWN 0x00
+#define MODE_INITIATOR 0x01
+#define MODE_TARGET 0x02
+
+#define DISABLE_CLUSTERING 0
+#define ENABLE_CLUSTERING 1
+
+enum {
+	SCSI_QDEPTH_DEFAULT,	/* default requested change, e.g. from sysfs */
+	SCSI_QDEPTH_QFULL,	/* scsi-ml requested due to queue full */
+	SCSI_QDEPTH_RAMP_UP,	/* scsi-ml requested due to threshold event */
+};
+
+struct scsi_host_template {
+	struct module *module;
+	const char *name;
+
+	/*
+	 * Used to initialize old-style drivers.  For new-style drivers
+	 * just perform all work in your module initialization function.
+	 *
+	 * Status:  OBSOLETE
+	 */
+	int (* detect)(struct scsi_host_template *);
+
+	/*
+	 * Used as unload callback for hosts with old-style drivers.
+	 *
+	 * Status: OBSOLETE
+	 */
+	int (* release)(struct Scsi_Host *);
+
+	/*
+	 * The info function will return whatever useful information the
+	 * developer sees fit.  If not provided, then the name field will
+	 * be used instead.
+	 *
+	 * Status: OPTIONAL
+	 */
+	const char *(* info)(struct Scsi_Host *);
+
+	/*
+	 * Ioctl interface
+	 *
+	 * Status: OPTIONAL
+	 */
+	int (* ioctl)(struct scsi_device *dev, int cmd, void __user *arg);
+
+
+#ifdef CONFIG_COMPAT
+	/* 
+	 * Compat handler. Handle 32bit ABI.
+	 * When unknown ioctl is passed return -ENOIOCTLCMD.
+	 *
+	 * Status: OPTIONAL
+	 */
+	int (* compat_ioctl)(struct scsi_device *dev, int cmd, void __user *arg);
+#endif
+
+	/*
+	 * The queuecommand function is used to queue up a scsi
+	 * command block to the LLDD.  When the driver finished
+	 * processing the command the done callback is invoked.
+	 *
+	 * If queuecommand returns 0, then the HBA has accepted the
+	 * command.  The done() function must be called on the command
+	 * when the driver has finished with it. (you may call done on the
+	 * command before queuecommand returns, but in this case you
+	 * *must* return 0 from queuecommand).
+	 *
+	 * Queuecommand may also reject the command, in which case it may
+	 * not touch the command and must not call done() for it.
+	 *
+	 * There are two possible rejection returns:
+	 *
+	 *   SCSI_MLQUEUE_DEVICE_BUSY: Block this device temporarily, but
+	 *   allow commands to other devices serviced by this host.
+	 *
+	 *   SCSI_MLQUEUE_HOST_BUSY: Block all devices served by this
+	 *   host temporarily.
+	 *
+         * For compatibility, any other non-zero return is treated the
+         * same as SCSI_MLQUEUE_HOST_BUSY.
+	 *
+	 * NOTE: "temporarily" means either until the next command for#
+	 * this device/host completes, or a period of time determined by
+	 * I/O pressure in the system if there are no other outstanding
+	 * commands.
+	 *
+	 * STATUS: REQUIRED
+	 */
+	int (* queuecommand)(struct Scsi_Host *, struct scsi_cmnd *);
+
+	/*
+	 * The transfer functions are used to queue a scsi command to
+	 * the LLD. When the driver is finished processing the command
+	 * the done callback is invoked.
+	 *
+	 * This is called to inform the LLD to transfer
+	 * scsi_bufflen(cmd) bytes. scsi_sg_count(cmd) speciefies the
+	 * number of scatterlist entried in the command and
+	 * scsi_sglist(cmd) returns the scatterlist.
+	 *
+	 * return values: see queuecommand
+	 *
+	 * If the LLD accepts the cmd, it should set the result to an
+	 * appropriate value when completed before calling the done function.
+	 *
+	 * STATUS: REQUIRED FOR TARGET DRIVERS
+	 */
+	/* TODO: rename */
+	int (* transfer_response)(struct scsi_cmnd *,
+				  void (*done)(struct scsi_cmnd *));
+
+	/*
+	 * This is an error handling strategy routine.  You don't need to
+	 * define one of these if you don't want to - there is a default
+	 * routine that is present that should work in most cases.  For those
+	 * driver authors that have the inclination and ability to write their
+	 * own strategy routine, this is where it is specified.  Note - the
+	 * strategy routine is *ALWAYS* run in the context of the kernel eh
+	 * thread.  Thus you are guaranteed to *NOT* be in an interrupt
+	 * handler when you execute this, and you are also guaranteed to
+	 * *NOT* have any other commands being queued while you are in the
+	 * strategy routine. When you return from this function, operations
+	 * return to normal.
+	 *
+	 * See scsi_error.c scsi_unjam_host for additional comments about
+	 * what this function should and should not be attempting to do.
+	 *
+	 * Status: REQUIRED	(at least one of them)
+	 */
+	int (* eh_abort_handler)(struct scsi_cmnd *);
+	int (* eh_device_reset_handler)(struct scsi_cmnd *);
+	int (* eh_target_reset_handler)(struct scsi_cmnd *);
+	int (* eh_bus_reset_handler)(struct scsi_cmnd *);
+	int (* eh_host_reset_handler)(struct scsi_cmnd *);
+
+	/*
+	 * Before the mid layer attempts to scan for a new device where none
+	 * currently exists, it will call this entry in your driver.  Should
+	 * your driver need to allocate any structs or perform any other init
+	 * items in order to send commands to a currently unused target/lun
+	 * combo, then this is where you can perform those allocations.  This
+	 * is specifically so that drivers won't have to perform any kind of
+	 * "is this a new device" checks in their queuecommand routine,
+	 * thereby making the hot path a bit quicker.
+	 *
+	 * Return values: 0 on success, non-0 on failure
+	 *
+	 * Deallocation:  If we didn't find any devices at this ID, you will
+	 * get an immediate call to slave_destroy().  If we find something
+	 * here then you will get a call to slave_configure(), then the
+	 * device will be used for however long it is kept around, then when
+	 * the device is removed from the system (or * possibly at reboot
+	 * time), you will then get a call to slave_destroy().  This is
+	 * assuming you implement slave_configure and slave_destroy.
+	 * However, if you allocate memory and hang it off the device struct,
+	 * then you must implement the slave_destroy() routine at a minimum
+	 * in order to avoid leaking memory
+	 * each time a device is tore down.
+	 *
+	 * Status: OPTIONAL
+	 */
+	int (* slave_alloc)(struct scsi_device *);
+
+	/*
+	 * Once the device has responded to an INQUIRY and we know the
+	 * device is online, we call into the low level driver with the
+	 * struct scsi_device *.  If the low level device driver implements
+	 * this function, it *must* perform the task of setting the queue
+	 * depth on the device.  All other tasks are optional and depend
+	 * on what the driver supports and various implementation details.
+	 * 
+	 * Things currently recommended to be handled at this time include:
+	 *
+	 * 1.  Setting the device queue depth.  Proper setting of this is
+	 *     described in the comments for scsi_adjust_queue_depth.
+	 * 2.  Determining if the device supports the various synchronous
+	 *     negotiation protocols.  The device struct will already have
+	 *     responded to INQUIRY and the results of the standard items
+	 *     will have been shoved into the various device flag bits, eg.
+	 *     device->sdtr will be true if the device supports SDTR messages.
+	 * 3.  Allocating command structs that the device will need.
+	 * 4.  Setting the default timeout on this device (if needed).
+	 * 5.  Anything else the low level driver might want to do on a device
+	 *     specific setup basis...
+	 * 6.  Return 0 on success, non-0 on error.  The device will be marked
+	 *     as offline on error so that no access will occur.  If you return
+	 *     non-0, your slave_destroy routine will never get called for this
+	 *     device, so don't leave any loose memory hanging around, clean
+	 *     up after yourself before returning non-0
+	 *
+	 * Status: OPTIONAL
+	 */
+	int (* slave_configure)(struct scsi_device *);
+
+	/*
+	 * Immediately prior to deallocating the device and after all activity
+	 * has ceased the mid layer calls this point so that the low level
+	 * driver may completely detach itself from the scsi device and vice
+	 * versa.  The low level driver is responsible for freeing any memory
+	 * it allocated in the slave_alloc or slave_configure calls. 
+	 *
+	 * Status: OPTIONAL
+	 */
+	void (* slave_destroy)(struct scsi_device *);
+
+	/*
+	 * Before the mid layer attempts to scan for a new device attached
+	 * to a target where no target currently exists, it will call this
+	 * entry in your driver.  Should your driver need to allocate any
+	 * structs or perform any other init items in order to send commands
+	 * to a currently unused target, then this is where you can perform
+	 * those allocations.
+	 *
+	 * Return values: 0 on success, non-0 on failure
+	 *
+	 * Status: OPTIONAL
+	 */
+	int (* target_alloc)(struct scsi_target *);
+
+	/*
+	 * Immediately prior to deallocating the target structure, and
+	 * after all activity to attached scsi devices has ceased, the
+	 * midlayer calls this point so that the driver may deallocate
+	 * and terminate any references to the target.
+	 *
+	 * Status: OPTIONAL
+	 */
+	void (* target_destroy)(struct scsi_target *);
+
+	/*
+	 * If a host has the ability to discover targets on its own instead
+	 * of scanning the entire bus, it can fill in this function and
+	 * call scsi_scan_host().  This function will be called periodically
+	 * until it returns 1 with the scsi_host and the elapsed time of
+	 * the scan in jiffies.
+	 *
+	 * Status: OPTIONAL
+	 */
+	int (* scan_finished)(struct Scsi_Host *, unsigned long);
+
+	/*
+	 * If the host wants to be called before the scan starts, but
+	 * after the midlayer has set up ready for the scan, it can fill
+	 * in this function.
+	 *
+	 * Status: OPTIONAL
+	 */
+	void (* scan_start)(struct Scsi_Host *);
+
+	/*
+	 * Fill in this function to allow the queue depth of this host
+	 * to be changeable (on a per device basis).  Returns either
+	 * the current queue depth setting (may be different from what
+	 * was passed in) or an error.  An error should only be
+	 * returned if the requested depth is legal but the driver was
+	 * unable to set it.  If the requested depth is illegal, the
+	 * driver should set and return the closest legal queue depth.
+	 *
+	 * Status: OPTIONAL
+	 */
+	int (* change_queue_depth)(struct scsi_device *, int, int);
+
+	/*
+	 * Fill in this function to allow the changing of tag types
+	 * (this also allows the enabling/disabling of tag command
+	 * queueing).  An error should only be returned if something
+	 * went wrong in the driver while trying to set the tag type.
+	 * If the driver doesn't support the requested tag type, then
+	 * it should set the closest type it does support without
+	 * returning an error.  Returns the actual tag type set.
+	 *
+	 * Status: OPTIONAL
+	 */
+	int (* change_queue_type)(struct scsi_device *, int);
+
+	/*
+	 * This function determines the BIOS parameters for a given
+	 * harddisk.  These tend to be numbers that are made up by
+	 * the host adapter.  Parameters:
+	 * size, device, list (heads, sectors, cylinders)
+	 *
+	 * Status: OPTIONAL
+	 */
+	int (* bios_param)(struct scsi_device *, struct block_device *,
+			sector_t, int []);
+
+	/*
+	 * This function is called when one or more partitions on the
+	 * device reach beyond the end of the device.
+	 *
+	 * Status: OPTIONAL
+	 */
+	void (*unlock_native_capacity)(struct scsi_device *);
+
+	/*
+	 * Can be used to export driver statistics and other infos to the
+	 * world outside the kernel ie. userspace and it also provides an
+	 * interface to feed the driver with information.
+	 *
+	 * Status: OBSOLETE
+	 */
+	int (*proc_info)(struct Scsi_Host *, char *, char **, off_t, int, int);
+
+	/*
+	 * This is an optional routine that allows the transport to become
+	 * involved when a scsi io timer fires. The return value tells the
+	 * timer routine how to finish the io timeout handling:
+	 * EH_HANDLED:		I fixed the error, please complete the command
+	 * EH_RESET_TIMER:	I need more time, reset the timer and
+	 *			begin counting again
+	 * EH_NOT_HANDLED	Begin normal error recovery
+	 *
+	 * Status: OPTIONAL
+	 */
+	enum blk_eh_timer_return (*eh_timed_out)(struct scsi_cmnd *);
+
+	/* This is an optional routine that allows transport to initiate
+	 * LLD adapter or firmware reset using sysfs attribute.
+	 *
+	 * Return values: 0 on success, -ve value on failure.
+	 *
+	 * Status: OPTIONAL
+	 */
+
+	int (*host_reset)(struct Scsi_Host *shost, int reset_type);
+#define SCSI_ADAPTER_RESET	1
+#define SCSI_FIRMWARE_RESET	2
+
+
+	/*
+	 * Name of proc directory
+	 */
+	const char *proc_name;
+
+	/*
+	 * Used to store the procfs directory if a driver implements the
+	 * proc_info method.
+	 */
+	struct proc_dir_entry *proc_dir;
+
+	/*
+	 * This determines if we will use a non-interrupt driven
+	 * or an interrupt driven scheme.  It is set to the maximum number
+	 * of simultaneous commands a given host adapter will accept.
+	 */
+	int can_queue;
+
+	/*
+	 * In many instances, especially where disconnect / reconnect are
+	 * supported, our host also has an ID on the SCSI bus.  If this is
+	 * the case, then it must be reserved.  Please set this_id to -1 if
+	 * your setup is in single initiator mode, and the host lacks an
+	 * ID.
+	 */
+	int this_id;
+
+	/*
+	 * This determines the degree to which the host adapter is capable
+	 * of scatter-gather.
+	 */
+	unsigned short sg_tablesize;
+	unsigned short sg_prot_tablesize;
+
+	/*
+	 * Set this if the host adapter has limitations beside segment count.
+	 */
+	unsigned short max_sectors;
+
+	/*
+	 * DMA scatter gather segment boundary limit. A segment crossing this
+	 * boundary will be split in two.
+	 */
+	unsigned long dma_boundary;
+
+	/*
+	 * This specifies "machine infinity" for host templates which don't
+	 * limit the transfer size.  Note this limit represents an absolute
+	 * maximum, and may be over the transfer limits allowed for
+	 * individual devices (e.g. 256 for SCSI-1).
+	 */
+#define SCSI_DEFAULT_MAX_SECTORS	1024
+
+	/*
+	 * True if this host adapter can make good use of linked commands.
+	 * This will allow more than one command to be queued to a given
+	 * unit on a given host.  Set this to the maximum number of command
+	 * blocks to be provided for each device.  Set this to 1 for one
+	 * command block per lun, 2 for two, etc.  Do not set this to 0.
+	 * You should make sure that the host adapter will do the right thing
+	 * before you try setting this above 1.
+	 */
+	short cmd_per_lun;
+
+	/*
+	 * present contains counter indicating how many boards of this
+	 * type were found when we did the scan.
+	 */
+	unsigned char present;
+
+	/*
+	 * This specifies the mode that a LLD supports.
+	 */
+	unsigned supported_mode:2;
+
+	/*
+	 * True if this host adapter uses unchecked DMA onto an ISA bus.
+	 */
+	unsigned unchecked_isa_dma:1;
+
+	/*
+	 * True if this host adapter can make good use of clustering.
+	 * I originally thought that if the tablesize was large that it
+	 * was a waste of CPU cycles to prepare a cluster list, but
+	 * it works out that the Buslogic is faster if you use a smaller
+	 * number of segments (i.e. use clustering).  I guess it is
+	 * inefficient.
+	 */
+	unsigned use_clustering:1;
+
+	/*
+	 * True for emulated SCSI host adapters (e.g. ATAPI).
+	 */
+	unsigned emulated:1;
+
+	/*
+	 * True if the low-level driver performs its own reset-settle delays.
+	 */
+	unsigned skip_settle_delay:1;
+
+	/*
+	 * True if we are using ordered write support.
+	 */
+	unsigned ordered_tag:1;
+
+	/*
+	 * Countdown for host blocking with no commands outstanding.
+	 */
+	unsigned int max_host_blocked;
+
+	/*
+	 * Default value for the blocking.  If the queue is empty,
+	 * host_blocked counts down in the request_fn until it restarts
+	 * host operations as zero is reached.  
+	 *
+	 * FIXME: This should probably be a value in the template
+	 */
+#define SCSI_DEFAULT_HOST_BLOCKED	7
+
+	/*
+	 * Pointer to the sysfs class properties for this host, NULL terminated.
+	 */
+	struct device_attribute **shost_attrs;
+
+	/*
+	 * Pointer to the SCSI device properties for this host, NULL terminated.
+	 */
+	struct device_attribute **sdev_attrs;
+
+	/*
+	 * List of hosts per template.
+	 *
+	 * This is only for use by scsi_module.c for legacy templates.
+	 * For these access to it is synchronized implicitly by
+	 * module_init/module_exit.
+	 */
+	struct list_head legacy_hosts;
+
+	/*
+	 * Vendor Identifier associated with the host
+	 *
+	 * Note: When specifying vendor_id, be sure to read the
+	 *   Vendor Type and ID formatting requirements specified in
+	 *   scsi_netlink.h
+	 */
+	u64 vendor_id;
+};
+
+/*
+ * Temporary #define for host lock push down. Can be removed when all
+ * drivers have been updated to take advantage of unlocked
+ * queuecommand.
+ *
+ */
+#define DEF_SCSI_QCMD(func_name) \
+	int func_name(struct Scsi_Host *shost, struct scsi_cmnd *cmd)	\
+	{								\
+		unsigned long irq_flags;				\
+		int rc;							\
+		spin_lock_irqsave(shost->host_lock, irq_flags);		\
+		scsi_cmd_get_serial(shost, cmd);			\
+		rc = func_name##_lck (cmd, cmd->scsi_done);			\
+		spin_unlock_irqrestore(shost->host_lock, irq_flags);	\
+		return rc;						\
+	}
+
+
+/*
+ * shost state: If you alter this, you also need to alter scsi_sysfs.c
+ * (for the ascii descriptions) and the state model enforcer:
+ * scsi_host_set_state()
+ */
+enum scsi_host_state {
+	SHOST_CREATED = 1,
+	SHOST_RUNNING,
+	SHOST_CANCEL,
+	SHOST_DEL,
+	SHOST_RECOVERY,
+	SHOST_CANCEL_RECOVERY,
+	SHOST_DEL_RECOVERY,
+};
+
+struct Scsi_Host {
+	/*
+	 * __devices is protected by the host_lock, but you should
+	 * usually use scsi_device_lookup / shost_for_each_device
+	 * to access it and don't care about locking yourself.
+	 * In the rare case of beeing in irq context you can use
+	 * their __ prefixed variants with the lock held. NEVER
+	 * access this list directly from a driver.
+	 */
+	struct list_head	__devices;
+	struct list_head	__targets;
+	
+	struct scsi_host_cmd_pool *cmd_pool;
+	spinlock_t		free_list_lock;
+	struct list_head	free_list; /* backup store of cmd structs */
+	struct list_head	starved_list;
+
+	spinlock_t		default_lock;
+	spinlock_t		*host_lock;
+
+	struct mutex		scan_mutex;/* serialize scanning activity */
+
+	struct list_head	eh_cmd_q;
+	struct task_struct    * ehandler;  /* Error recovery thread. */
+	struct completion     * eh_action; /* Wait for specific actions on the
+					      host. */
+	wait_queue_head_t       host_wait;
+	struct scsi_host_template *hostt;
+	struct scsi_transport_template *transportt;
+
+	/*
+	 * Area to keep a shared tag map (if needed, will be
+	 * NULL if not).
+	 */
+	struct blk_queue_tag	*bqt;
+
+	/*
+	 * The following two fields are protected with host_lock;
+	 * however, eh routines can safely access during eh processing
+	 * without acquiring the lock.
+	 */
+	unsigned int host_busy;		   /* commands actually active on low-level */
+	unsigned int host_failed;	   /* commands that failed. */
+	unsigned int host_eh_scheduled;    /* EH scheduled without command */
+    
+	unsigned int host_no;  /* Used for IOCTL_GET_IDLUN, /proc/scsi et al. */
+	int resetting; /* if set, it means that last_reset is a valid value */
+	unsigned long last_reset;
+
+	/*
+	 * These three parameters can be used to allow for wide scsi,
+	 * and for host adapters that support multiple busses
+	 * The first two should be set to 1 more than the actual max id
+	 * or lun (i.e. 8 for normal systems).
+	 */
+	unsigned int max_id;
+	unsigned int max_lun;
+	unsigned int max_channel;
+
+	/*
+	 * This is a unique identifier that must be assigned so that we
+	 * have some way of identifying each detected host adapter properly
+	 * and uniquely.  For hosts that do not support more than one card
+	 * in the system at one time, this does not need to be set.  It is
+	 * initialized to 0 in scsi_register.
+	 */
+	unsigned int unique_id;
+
+	/*
+	 * The maximum length of SCSI commands that this host can accept.
+	 * Probably 12 for most host adapters, but could be 16 for others.
+	 * or 260 if the driver supports variable length cdbs.
+	 * For drivers that don't set this field, a value of 12 is
+	 * assumed.
+	 */
+	unsigned short max_cmd_len;
+
+	int this_id;
+	int can_queue;
+	short cmd_per_lun;
+	short unsigned int sg_tablesize;
+	short unsigned int sg_prot_tablesize;
+	short unsigned int max_sectors;
+	unsigned long dma_boundary;
+	/* 
+	 * Used to assign serial numbers to the cmds.
+	 * Protected by the host lock.
+	 */
+	unsigned long cmd_serial_number;
+	
+	unsigned active_mode:2;
+	unsigned unchecked_isa_dma:1;
+	unsigned use_clustering:1;
+	unsigned use_blk_tcq:1;
+
+	/*
+	 * Host has requested that no further requests come through for the
+	 * time being.
+	 */
+	unsigned host_self_blocked:1;
+    
+	/*
+	 * Host uses correct SCSI ordering not PC ordering. The bit is
+	 * set for the minority of drivers whose authors actually read
+	 * the spec ;).
+	 */
+	unsigned reverse_ordering:1;
+
+	/*
+	 * Ordered write support
+	 */
+	unsigned ordered_tag:1;
+
+	/* Task mgmt function in progress */
+	unsigned tmf_in_progress:1;
+
+	/* Asynchronous scan in progress */
+	unsigned async_scan:1;
+
+	/* Don't resume host in EH */
+	unsigned eh_noresume:1;
+
+	/*
+	 * Optional work queue to be utilized by the transport
+	 */
+	char work_q_name[20];
+	struct workqueue_struct *work_q;
+
+	/*
+	 * Host has rejected a command because it was busy.
+	 */
+	unsigned int host_blocked;
+
+	/*
+	 * Value host_blocked counts down from
+	 */
+	unsigned int max_host_blocked;
+
+	/* Protection Information */
+	unsigned int prot_capabilities;
+	unsigned char prot_guard_type;
+
+	/*
+	 * q used for scsi_tgt msgs, async events or any other requests that
+	 * need to be processed in userspace
+	 */
+	struct request_queue *uspace_req_q;
+
+	/* legacy crap */
+	unsigned long base;
+	unsigned long io_port;
+	unsigned char n_io_port;
+	unsigned char dma_channel;
+	unsigned int  irq;
+	
+
+	enum scsi_host_state shost_state;
+
+	/* ldm bits */
+	struct device		shost_gendev, shost_dev;
+
+	/*
+	 * List of hosts per template.
+	 *
+	 * This is only for use by scsi_module.c for legacy templates.
+	 * For these access to it is synchronized implicitly by
+	 * module_init/module_exit.
+	 */
+	struct list_head sht_legacy_list;
+
+	/*
+	 * Points to the transport data (if any) which is allocated
+	 * separately
+	 */
+	void *shost_data;
+
+	/*
+	 * Points to the physical bus device we'd use to do DMA
+	 * Needed just in case we have virtual hosts.
+	 */
+	struct device *dma_dev;
+
+	/*
+	 * We should ensure that this is aligned, both for better performance
+	 * and also because some compilers (m68k) don't automatically force
+	 * alignment to a long boundary.
+	 */
+	unsigned long hostdata[0]  /* Used for storage of host specific stuff */
+		__attribute__ ((aligned (sizeof(unsigned long))));
+};
+
+#define		class_to_shost(d)	\
+	container_of(d, struct Scsi_Host, shost_dev)
+
+#define shost_printk(prefix, shost, fmt, a...)	\
+	dev_printk(prefix, &(shost)->shost_gendev, fmt, ##a)
+
+static inline void *shost_priv(struct Scsi_Host *shost)
+{
+	return (void *)shost->hostdata;
+}
+
+int scsi_is_host_device(const struct device *);
+
+static inline struct Scsi_Host *dev_to_shost(struct device *dev)
+{
+	while (!scsi_is_host_device(dev)) {
+		if (!dev->parent)
+			return NULL;
+		dev = dev->parent;
+	}
+	return container_of(dev, struct Scsi_Host, shost_gendev);
+}
+
+static inline int scsi_host_in_recovery(struct Scsi_Host *shost)
+{
+	return shost->shost_state == SHOST_RECOVERY ||
+		shost->shost_state == SHOST_CANCEL_RECOVERY ||
+		shost->shost_state == SHOST_DEL_RECOVERY ||
+		shost->tmf_in_progress;
+}
+
+extern int scsi_queue_work(struct Scsi_Host *, struct work_struct *);
+extern void scsi_flush_work(struct Scsi_Host *);
+
+extern struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *, int);
+extern int __must_check scsi_add_host_with_dma(struct Scsi_Host *,
+					       struct device *,
+					       struct device *);
+extern void scsi_scan_host(struct Scsi_Host *);
+extern void scsi_rescan_device(struct device *);
+extern void scsi_remove_host(struct Scsi_Host *);
+extern struct Scsi_Host *scsi_host_get(struct Scsi_Host *);
+extern void scsi_host_put(struct Scsi_Host *t);
+extern struct Scsi_Host *scsi_host_lookup(unsigned short);
+extern const char *scsi_host_state_name(enum scsi_host_state);
+extern void scsi_cmd_get_serial(struct Scsi_Host *, struct scsi_cmnd *);
+
+extern u64 scsi_calculate_bounce_limit(struct Scsi_Host *);
+
+static inline int __must_check scsi_add_host(struct Scsi_Host *host,
+					     struct device *dev)
+{
+	return scsi_add_host_with_dma(host, dev, dev);
+}
+
+static inline struct device *scsi_get_device(struct Scsi_Host *shost)
+{
+        return shost->shost_gendev.parent;
+}
+
+/**
+ * scsi_host_scan_allowed - Is scanning of this host allowed
+ * @shost:	Pointer to Scsi_Host.
+ **/
+static inline int scsi_host_scan_allowed(struct Scsi_Host *shost)
+{
+	return shost->shost_state == SHOST_RUNNING ||
+	       shost->shost_state == SHOST_RECOVERY;
+}
+
+extern void scsi_unblock_requests(struct Scsi_Host *);
+extern void scsi_block_requests(struct Scsi_Host *);
+
+struct class_container;
+
+extern struct request_queue *__scsi_alloc_queue(struct Scsi_Host *shost,
+						void (*) (struct request_queue *));
+/*
+ * These two functions are used to allocate and free a pseudo device
+ * which will connect to the host adapter itself rather than any
+ * physical device.  You must deallocate when you are done with the
+ * thing.  This physical pseudo-device isn't real and won't be available
+ * from any high-level drivers.
+ */
+extern void scsi_free_host_dev(struct scsi_device *);
+extern struct scsi_device *scsi_get_host_dev(struct Scsi_Host *);
+
+/*
+ * DIF defines the exchange of protection information between
+ * initiator and SBC block device.
+ *
+ * DIX defines the exchange of protection information between OS and
+ * initiator.
+ */
+enum scsi_host_prot_capabilities {
+	SHOST_DIF_TYPE1_PROTECTION = 1 << 0, /* T10 DIF Type 1 */
+	SHOST_DIF_TYPE2_PROTECTION = 1 << 1, /* T10 DIF Type 2 */
+	SHOST_DIF_TYPE3_PROTECTION = 1 << 2, /* T10 DIF Type 3 */
+
+	SHOST_DIX_TYPE0_PROTECTION = 1 << 3, /* DIX between OS and HBA only */
+	SHOST_DIX_TYPE1_PROTECTION = 1 << 4, /* DIX with DIF Type 1 */
+	SHOST_DIX_TYPE2_PROTECTION = 1 << 5, /* DIX with DIF Type 2 */
+	SHOST_DIX_TYPE3_PROTECTION = 1 << 6, /* DIX with DIF Type 3 */
+};
+
+/*
+ * SCSI hosts which support the Data Integrity Extensions must
+ * indicate their capabilities by setting the prot_capabilities using
+ * this call.
+ */
+static inline void scsi_host_set_prot(struct Scsi_Host *shost, unsigned int mask)
+{
+	shost->prot_capabilities = mask;
+}
+
+static inline unsigned int scsi_host_get_prot(struct Scsi_Host *shost)
+{
+	return shost->prot_capabilities;
+}
+
+static inline int scsi_host_prot_dma(struct Scsi_Host *shost)
+{
+	return shost->prot_capabilities >= SHOST_DIX_TYPE0_PROTECTION;
+}
+
+static inline unsigned int scsi_host_dif_capable(struct Scsi_Host *shost, unsigned int target_type)
+{
+	static unsigned char cap[] = { 0,
+				       SHOST_DIF_TYPE1_PROTECTION,
+				       SHOST_DIF_TYPE2_PROTECTION,
+				       SHOST_DIF_TYPE3_PROTECTION };
+
+	return shost->prot_capabilities & cap[target_type] ? target_type : 0;
+}
+
+static inline unsigned int scsi_host_dix_capable(struct Scsi_Host *shost, unsigned int target_type)
+{
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+	static unsigned char cap[] = { SHOST_DIX_TYPE0_PROTECTION,
+				       SHOST_DIX_TYPE1_PROTECTION,
+				       SHOST_DIX_TYPE2_PROTECTION,
+				       SHOST_DIX_TYPE3_PROTECTION };
+
+	return shost->prot_capabilities & cap[target_type];
+#endif
+	return 0;
+}
+
+/*
+ * All DIX-capable initiators must support the T10-mandated CRC
+ * checksum.  Controllers can optionally implement the IP checksum
+ * scheme which has much lower impact on system performance.  Note
+ * that the main rationale for the checksum is to match integrity
+ * metadata with data.  Detecting bit errors are a job for ECC memory
+ * and buses.
+ */
+
+enum scsi_host_guard_type {
+	SHOST_DIX_GUARD_CRC = 1 << 0,
+	SHOST_DIX_GUARD_IP  = 1 << 1,
+};
+
+static inline void scsi_host_set_guard(struct Scsi_Host *shost, unsigned char type)
+{
+	shost->prot_guard_type = type;
+}
+
+static inline unsigned char scsi_host_get_guard(struct Scsi_Host *shost)
+{
+	return shost->prot_guard_type;
+}
+
+/* legacy interfaces */
+extern struct Scsi_Host *scsi_register(struct scsi_host_template *, int);
+extern void scsi_unregister(struct Scsi_Host *);
+extern int scsi_host_set_state(struct Scsi_Host *, enum scsi_host_state);
+
+#endif /* _SCSI_SCSI_HOST_H */
diff --git a/include/scsi/scsi_ioctl.h b/include/scsi/scsi_ioctl.h
new file mode 100644
index 00000000..b9006848
--- /dev/null
+++ b/include/scsi/scsi_ioctl.h
@@ -0,0 +1,48 @@
+#ifndef _SCSI_IOCTL_H
+#define _SCSI_IOCTL_H 
+
+#define SCSI_IOCTL_SEND_COMMAND 1
+#define SCSI_IOCTL_TEST_UNIT_READY 2
+#define SCSI_IOCTL_BENCHMARK_COMMAND 3
+#define SCSI_IOCTL_SYNC 4			/* Request synchronous parameters */
+#define SCSI_IOCTL_START_UNIT 5
+#define SCSI_IOCTL_STOP_UNIT 6
+/* The door lock/unlock constants are compatible with Sun constants for
+   the cdrom */
+#define SCSI_IOCTL_DOORLOCK 0x5380		/* lock the eject mechanism */
+#define SCSI_IOCTL_DOORUNLOCK 0x5381		/* unlock the mechanism	  */
+
+#define	SCSI_REMOVAL_PREVENT	1
+#define	SCSI_REMOVAL_ALLOW	0
+
+#ifdef __KERNEL__
+
+struct scsi_device;
+
+/*
+ * Structures used for scsi_ioctl et al.
+ */
+
+typedef struct scsi_ioctl_command {
+	unsigned int inlen;
+	unsigned int outlen;
+	unsigned char data[0];
+} Scsi_Ioctl_Command;
+
+typedef struct scsi_idlun {
+	__u32 dev_id;
+	__u32 host_unique_id;
+} Scsi_Idlun;
+
+/* Fibre Channel WWN, port_id struct */
+typedef struct scsi_fctargaddress {
+	__u32 host_port_id;
+	unsigned char host_wwn[8]; // include NULL term.
+} Scsi_FCTargAddress;
+
+extern int scsi_ioctl(struct scsi_device *, int, void __user *);
+extern int scsi_nonblockable_ioctl(struct scsi_device *sdev, int cmd,
+				   void __user *arg, int ndelay);
+
+#endif /* __KERNEL__ */
+#endif /* _SCSI_IOCTL_H */
diff --git a/include/scsi/scsi_netlink.h b/include/scsi/scsi_netlink.h
new file mode 100644
index 00000000..5cb20ccb
--- /dev/null
+++ b/include/scsi/scsi_netlink.h
@@ -0,0 +1,147 @@
+/*
+ *  SCSI Transport Netlink Interface
+ *    Used for the posting of outbound SCSI transport events
+ *
+ *  Copyright (C) 2006   James Smart, Emulex Corporation
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#ifndef SCSI_NETLINK_H
+#define SCSI_NETLINK_H
+
+#include <linux/netlink.h>
+#include <linux/types.h>
+
+/*
+ * This file intended to be included by both kernel and user space
+ */
+
+/* Single Netlink Message type to send all SCSI Transport messages */
+#define SCSI_TRANSPORT_MSG		NLMSG_MIN_TYPE + 1
+
+/* SCSI Transport Broadcast Groups */
+	/* leaving groups 0 and 1 unassigned */
+#define SCSI_NL_GRP_FC_EVENTS		(1<<2)		/* Group 2 */
+#define SCSI_NL_GRP_CNT			3
+
+
+/* SCSI_TRANSPORT_MSG event message header */
+struct scsi_nl_hdr {
+	uint8_t version;
+	uint8_t transport;
+	uint16_t magic;
+	uint16_t msgtype;
+	uint16_t msglen;
+} __attribute__((aligned(sizeof(uint64_t))));
+
+/* scsi_nl_hdr->version value */
+#define SCSI_NL_VERSION				1
+
+/* scsi_nl_hdr->magic value */
+#define SCSI_NL_MAGIC				0xA1B2
+
+/* scsi_nl_hdr->transport value */
+#define SCSI_NL_TRANSPORT			0
+#define SCSI_NL_TRANSPORT_FC			1
+#define SCSI_NL_MAX_TRANSPORTS			2
+
+/* Transport-based scsi_nl_hdr->msgtype values are defined in each transport */
+
+/*
+ * GENERIC SCSI scsi_nl_hdr->msgtype Values
+ */
+	/* kernel -> user */
+#define SCSI_NL_SHOST_VENDOR			0x0001
+	/* user -> kernel */
+/* SCSI_NL_SHOST_VENDOR msgtype is kernel->user and user->kernel */
+
+
+/*
+ * Message Structures :
+ */
+
+/* macro to round up message lengths to 8byte boundary */
+#define SCSI_NL_MSGALIGN(len)		(((len) + 7) & ~7)
+
+
+/*
+ * SCSI HOST Vendor Unique messages :
+ *   SCSI_NL_SHOST_VENDOR
+ *
+ * Note: The Vendor Unique message payload will begin directly after
+ * 	 this structure, with the length of the payload per vmsg_datalen.
+ *
+ * Note: When specifying vendor_id, be sure to read the Vendor Type and ID
+ *   formatting requirements specified below
+ */
+struct scsi_nl_host_vendor_msg {
+	struct scsi_nl_hdr snlh;		/* must be 1st element ! */
+	uint64_t vendor_id;
+	uint16_t host_no;
+	uint16_t vmsg_datalen;
+} __attribute__((aligned(sizeof(uint64_t))));
+
+
+/*
+ * Vendor ID:
+ *   If transports post vendor-unique events, they must pass a well-known
+ *   32-bit vendor identifier. This identifier consists of 8 bits indicating
+ *   the "type" of identifier contained, and 24 bits of id data.
+ *
+ *   Identifiers for each type:
+ *    PCI :  ID data is the 16 bit PCI Registered Vendor ID
+ */
+#define SCSI_NL_VID_TYPE_SHIFT		56
+#define SCSI_NL_VID_TYPE_MASK		((__u64)0xFF << SCSI_NL_VID_TYPE_SHIFT)
+#define SCSI_NL_VID_TYPE_PCI		((__u64)0x01 << SCSI_NL_VID_TYPE_SHIFT)
+#define SCSI_NL_VID_ID_MASK		(~ SCSI_NL_VID_TYPE_MASK)
+
+
+#define INIT_SCSI_NL_HDR(hdr, t, mtype, mlen)			\
+	{							\
+	(hdr)->version = SCSI_NL_VERSION;			\
+	(hdr)->transport = t;					\
+	(hdr)->magic = SCSI_NL_MAGIC;				\
+	(hdr)->msgtype = mtype;					\
+	(hdr)->msglen = mlen;					\
+	}
+
+
+#ifdef __KERNEL__
+
+#include <scsi/scsi_host.h>
+
+/* Exported Kernel Interfaces */
+int scsi_nl_add_transport(u8 tport,
+	 int (*msg_handler)(struct sk_buff *),
+	void (*event_handler)(struct notifier_block *, unsigned long, void *));
+void scsi_nl_remove_transport(u8 tport);
+
+int scsi_nl_add_driver(u64 vendor_id, struct scsi_host_template *hostt,
+	int (*nlmsg_handler)(struct Scsi_Host *shost, void *payload,
+				 u32 len, u32 pid),
+	void (*nlevt_handler)(struct notifier_block *nb,
+				 unsigned long event, void *notify_ptr));
+void scsi_nl_remove_driver(u64 vendor_id);
+
+void scsi_nl_send_transport_msg(u32 pid, struct scsi_nl_hdr *hdr);
+int scsi_nl_send_vendor_msg(u32 pid, unsigned short host_no, u64 vendor_id,
+			 char *data_buf, u32 data_len);
+
+#endif /* __KERNEL__ */
+
+#endif /* SCSI_NETLINK_H */
+
diff --git a/include/scsi/scsi_netlink_fc.h b/include/scsi/scsi_netlink_fc.h
new file mode 100644
index 00000000..cbf76e47
--- /dev/null
+++ b/include/scsi/scsi_netlink_fc.h
@@ -0,0 +1,71 @@
+/*
+ *  FC Transport Netlink Interface
+ *
+ *  Copyright (C) 2006   James Smart, Emulex Corporation
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#ifndef SCSI_NETLINK_FC_H
+#define SCSI_NETLINK_FC_H
+
+#include <scsi/scsi_netlink.h>
+
+/*
+ * This file intended to be included by both kernel and user space
+ */
+
+/*
+ * FC Transport Message Types
+ */
+	/* kernel -> user */
+#define FC_NL_ASYNC_EVENT			0x0100
+	/* user -> kernel */
+/* none */
+
+
+/*
+ * Message Structures :
+ */
+
+/* macro to round up message lengths to 8byte boundary */
+#define FC_NL_MSGALIGN(len)		(((len) + 7) & ~7)
+
+
+/*
+ * FC Transport Broadcast Event Message :
+ *   FC_NL_ASYNC_EVENT
+ *
+ * Note: if Vendor Unique message, &event_data will be  start of
+ * 	 vendor unique payload, and the length of the payload is
+ *       per event_datalen
+ *
+ * Note: When specifying vendor_id, be sure to read the Vendor Type and ID
+ *   formatting requirements specified in scsi_netlink.h
+ */
+struct fc_nl_event {
+	struct scsi_nl_hdr snlh;		/* must be 1st element ! */
+	uint64_t seconds;
+	uint64_t vendor_id;
+	uint16_t host_no;
+	uint16_t event_datalen;
+	uint32_t event_num;
+	uint32_t event_code;
+	uint32_t event_data;
+} __attribute__((aligned(sizeof(uint64_t))));
+
+
+#endif /* SCSI_NETLINK_FC_H */
+
diff --git a/include/scsi/scsi_scan.h b/include/scsi/scsi_scan.h
new file mode 100644
index 00000000..78898889
--- /dev/null
+++ b/include/scsi/scsi_scan.h
@@ -0,0 +1,11 @@
+#ifndef _SCSI_SCSI_SCAN_H
+#define _SCSI_SCSI_SCAN_H
+
+#ifdef CONFIG_SCSI
+/* drivers/scsi/scsi_scan.c */
+extern int scsi_complete_async_scans(void);
+#else
+static inline int scsi_complete_async_scans(void) { return 0; }
+#endif
+
+#endif /* _SCSI_SCSI_SCAN_H */
diff --git a/include/scsi/scsi_tcq.h b/include/scsi/scsi_tcq.h
new file mode 100644
index 00000000..81dd12ed
--- /dev/null
+++ b/include/scsi/scsi_tcq.h
@@ -0,0 +1,175 @@
+#ifndef _SCSI_SCSI_TCQ_H
+#define _SCSI_SCSI_TCQ_H
+
+#include <linux/blkdev.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+
+#define MSG_SIMPLE_TAG	0x20
+#define MSG_HEAD_TAG	0x21
+#define MSG_ORDERED_TAG	0x22
+#define MSG_ACA_TAG	0x24	/* unsupported */
+
+#define SCSI_NO_TAG	(-1)    /* identify no tag in use */
+
+
+#ifdef CONFIG_BLOCK
+
+/**
+ * scsi_get_tag_type - get the type of tag the device supports
+ * @sdev:	the scsi device
+ *
+ * Notes:
+ *	If the drive only supports simple tags, returns MSG_SIMPLE_TAG
+ *	if it supports all tag types, returns MSG_ORDERED_TAG.
+ */
+static inline int scsi_get_tag_type(struct scsi_device *sdev)
+{
+	if (!sdev->tagged_supported)
+		return 0;
+	if (sdev->ordered_tags)
+		return MSG_ORDERED_TAG;
+	if (sdev->simple_tags)
+		return MSG_SIMPLE_TAG;
+	return 0;
+}
+
+static inline void scsi_set_tag_type(struct scsi_device *sdev, int tag)
+{
+	switch (tag) {
+	case MSG_ORDERED_TAG:
+		sdev->ordered_tags = 1;
+		/* fall through */
+	case MSG_SIMPLE_TAG:
+		sdev->simple_tags = 1;
+		break;
+	case 0:
+		/* fall through */
+	default:
+		sdev->ordered_tags = 0;
+		sdev->simple_tags = 0;
+		break;
+	}
+}
+/**
+ * scsi_activate_tcq - turn on tag command queueing
+ * @SDpnt:	device to turn on TCQ for
+ * @depth:	queue depth
+ *
+ * Notes:
+ *	Eventually, I hope depth would be the maximum depth
+ *	the device could cope with and the real queue depth
+ *	would be adjustable from 0 to depth.
+ **/
+static inline void scsi_activate_tcq(struct scsi_device *sdev, int depth)
+{
+	if (!sdev->tagged_supported)
+		return;
+
+	if (!blk_queue_tagged(sdev->request_queue))
+		blk_queue_init_tags(sdev->request_queue, depth,
+				    sdev->host->bqt);
+
+	scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth);
+}
+
+/**
+ * scsi_deactivate_tcq - turn off tag command queueing
+ * @SDpnt:	device to turn off TCQ for
+ **/
+static inline void scsi_deactivate_tcq(struct scsi_device *sdev, int depth)
+{
+	if (blk_queue_tagged(sdev->request_queue))
+		blk_queue_free_tags(sdev->request_queue);
+	scsi_adjust_queue_depth(sdev, 0, depth);
+}
+
+/**
+ * scsi_populate_tag_msg - place a tag message in a buffer
+ * @SCpnt:	pointer to the Scsi_Cmnd for the tag
+ * @msg:	pointer to the area to place the tag
+ *
+ * Notes:
+ *	designed to create the correct type of tag message for the 
+ *	particular request.  Returns the size of the tag message.
+ *	May return 0 if TCQ is disabled for this device.
+ **/
+static inline int scsi_populate_tag_msg(struct scsi_cmnd *cmd, char *msg)
+{
+        struct request *req = cmd->request;
+
+        if (blk_rq_tagged(req)) {
+		*msg++ = MSG_SIMPLE_TAG;
+        	*msg++ = req->tag;
+        	return 2;
+	}
+
+	return 0;
+}
+
+/**
+ * scsi_find_tag - find a tagged command by device
+ * @SDpnt:	pointer to the ScSI device
+ * @tag:	the tag number
+ *
+ * Notes:
+ *	Only works with tags allocated by the generic blk layer.
+ **/
+static inline struct scsi_cmnd *scsi_find_tag(struct scsi_device *sdev, int tag)
+{
+
+        struct request *req;
+
+        if (tag != SCSI_NO_TAG) {
+        	req = blk_queue_find_tag(sdev->request_queue, tag);
+	        return req ? (struct scsi_cmnd *)req->special : NULL;
+	}
+
+	/* single command, look in space */
+	return sdev->current_cmnd;
+}
+
+/**
+ * scsi_init_shared_tag_map - create a shared tag map
+ * @shost:	the host to share the tag map among all devices
+ * @depth:	the total depth of the map
+ */
+static inline int scsi_init_shared_tag_map(struct Scsi_Host *shost, int depth)
+{
+	/*
+	 * If the shared tag map isn't already initialized, do it now.
+	 * This saves callers from having to check ->bqt when setting up
+	 * devices on the shared host (for libata)
+	 */
+	if (!shost->bqt) {
+		shost->bqt = blk_init_tags(depth);
+		if (!shost->bqt)
+			return -ENOMEM;
+	}
+
+	return 0;
+}
+
+/**
+ * scsi_host_find_tag - find the tagged command by host
+ * @shost:	pointer to scsi_host
+ * @tag:	tag of the scsi_cmnd
+ *
+ * Notes:
+ *	Only works with tags allocated by the generic blk layer.
+ **/
+static inline struct scsi_cmnd *scsi_host_find_tag(struct Scsi_Host *shost,
+						int tag)
+{
+	struct request *req;
+
+	if (tag != SCSI_NO_TAG) {
+		req = blk_map_queue_find_tag(shost->bqt, tag);
+		return req ? (struct scsi_cmnd *)req->special : NULL;
+	}
+	return NULL;
+}
+
+#endif /* CONFIG_BLOCK */
+#endif /* _SCSI_SCSI_TCQ_H */
diff --git a/include/scsi/scsi_tgt.h b/include/scsi/scsi_tgt.h
new file mode 100644
index 00000000..d0fefb96
--- /dev/null
+++ b/include/scsi/scsi_tgt.h
@@ -0,0 +1,21 @@
+/*
+ * SCSI target definitions
+ */
+
+#include <linux/dma-mapping.h>
+
+struct Scsi_Host;
+struct scsi_cmnd;
+struct scsi_lun;
+
+extern struct Scsi_Host *scsi_tgt_cmd_to_host(struct scsi_cmnd *);
+extern int scsi_tgt_alloc_queue(struct Scsi_Host *);
+extern void scsi_tgt_free_queue(struct Scsi_Host *);
+extern int scsi_tgt_queue_command(struct scsi_cmnd *, u64, struct scsi_lun *, u64);
+extern int scsi_tgt_tsk_mgmt_request(struct Scsi_Host *, u64, int, u64,
+				     struct scsi_lun *, void *);
+extern struct scsi_cmnd *scsi_host_get_command(struct Scsi_Host *,
+					       enum dma_data_direction,	gfp_t);
+extern void scsi_host_put_command(struct Scsi_Host *, struct scsi_cmnd *);
+extern int scsi_tgt_it_nexus_create(struct Scsi_Host *, u64, char *);
+extern int scsi_tgt_it_nexus_destroy(struct Scsi_Host *, u64);
diff --git a/include/scsi/scsi_tgt_if.h b/include/scsi/scsi_tgt_if.h
new file mode 100644
index 00000000..f2ee7c23
--- /dev/null
+++ b/include/scsi/scsi_tgt_if.h
@@ -0,0 +1,108 @@
+/*
+ * SCSI target kernel/user interface
+ *
+ * Copyright (C) 2005 FUJITA Tomonori <tomof@acm.org>
+ * Copyright (C) 2005 Mike Christie <michaelc@cs.wisc.edu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+#ifndef __SCSI_TARGET_IF_H
+#define __SCSI_TARGET_IF_H
+
+/* user -> kernel */
+#define	TGT_UEVENT_CMD_RSP		0x0001
+#define	TGT_UEVENT_IT_NEXUS_RSP		0x0002
+#define	TGT_UEVENT_TSK_MGMT_RSP		0x0003
+
+/* kernel -> user */
+#define	TGT_KEVENT_CMD_REQ		0x1001
+#define	TGT_KEVENT_CMD_DONE		0x1002
+#define	TGT_KEVENT_IT_NEXUS_REQ		0x1003
+#define	TGT_KEVENT_TSK_MGMT_REQ		0x1004
+
+struct tgt_event_hdr {
+	uint16_t version;
+	uint16_t status;
+	uint16_t type;
+	uint16_t len;
+} __attribute__ ((aligned (sizeof(uint64_t))));
+
+struct tgt_event {
+	struct tgt_event_hdr hdr;
+
+	union {
+		/* user-> kernel */
+		struct {
+			int host_no;
+			int result;
+			aligned_u64 itn_id;
+			aligned_u64 tag;
+			aligned_u64 uaddr;
+			aligned_u64 sense_uaddr;
+			uint32_t len;
+			uint32_t sense_len;
+			uint8_t rw;
+		} cmd_rsp;
+		struct {
+			int host_no;
+			int result;
+			aligned_u64 itn_id;
+			aligned_u64 mid;
+		} tsk_mgmt_rsp;
+		struct {
+			__s32 host_no;
+			__s32 result;
+			aligned_u64 itn_id;
+			__u32 function;
+		} it_nexus_rsp;
+
+		/* kernel -> user */
+		struct {
+			int host_no;
+			uint32_t data_len;
+			aligned_u64 itn_id;
+			uint8_t scb[16];
+			uint8_t lun[8];
+			int attribute;
+			aligned_u64 tag;
+		} cmd_req;
+		struct {
+			int host_no;
+			int result;
+			aligned_u64 itn_id;
+			aligned_u64 tag;
+		} cmd_done;
+		struct {
+			int host_no;
+			int function;
+			aligned_u64 itn_id;
+			aligned_u64 tag;
+			uint8_t lun[8];
+			aligned_u64 mid;
+		} tsk_mgmt_req;
+		struct {
+			__s32 host_no;
+			__u32 function;
+			aligned_u64 itn_id;
+			__u32 max_cmds;
+			__u8 initiator_id[16];
+		} it_nexus_req;
+	} p;
+} __attribute__ ((aligned (sizeof(uint64_t))));
+
+#define TGT_RING_SIZE (1UL << 16)
+
+#endif
diff --git a/include/scsi/scsi_transport.h b/include/scsi/scsi_transport.h
new file mode 100644
index 00000000..af244f4b
--- /dev/null
+++ b/include/scsi/scsi_transport.h
@@ -0,0 +1,122 @@
+/* 
+ *  Transport specific attributes.
+ *
+ *  Copyright (c) 2003 Silicon Graphics, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef SCSI_TRANSPORT_H
+#define SCSI_TRANSPORT_H
+
+#include <linux/transport_class.h>
+#include <linux/blkdev.h>
+#include <linux/bug.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+
+struct scsi_transport_template {
+	/* the attribute containers */
+	struct transport_container host_attrs;
+	struct transport_container target_attrs;
+	struct transport_container device_attrs;
+
+	/*
+	 * If set, called from sysfs and legacy procfs rescanning code.
+	 */
+	int (*user_scan)(struct Scsi_Host *, uint, uint, uint);
+
+	/* The size of the specific transport attribute structure (a
+	 * space of this size will be left at the end of the
+	 * scsi_* structure */
+	int	device_size;
+	int	device_private_offset;
+	int	target_size;
+	int	target_private_offset;
+	int	host_size;
+	/* no private offset for the host; there's an alternative mechanism */
+
+	/*
+	 * True if the transport wants to use a host-based work-queue
+	 */
+	unsigned int create_work_queue : 1;
+
+	/*
+	 * Allows a transport to override the default error handler.
+	 */
+	void (* eh_strategy_handler)(struct Scsi_Host *);
+
+	/*
+	 * This is an optional routine that allows the transport to become
+	 * involved when a scsi io timer fires. The return value tells the
+	 * timer routine how to finish the io timeout handling:
+	 * EH_HANDLED:		I fixed the error, please complete the command
+	 * EH_RESET_TIMER:	I need more time, reset the timer and
+	 *			begin counting again
+	 * EH_NOT_HANDLED	Begin normal error recovery
+	 */
+	enum blk_eh_timer_return (*eh_timed_out)(struct scsi_cmnd *);
+
+	/*
+	 * Used as callback for the completion of i_t_nexus request
+	 * for target drivers.
+	 */
+	int (* it_nexus_response)(struct Scsi_Host *, u64, int);
+
+	/*
+	 * Used as callback for the completion of task management
+	 * request for target drivers.
+	 */
+	int (* tsk_mgmt_response)(struct Scsi_Host *, u64, u64, int);
+};
+
+#define transport_class_to_shost(tc) \
+	dev_to_shost((tc)->parent)
+
+
+/* Private area maintenance. The driver requested allocations come
+ * directly after the transport class allocations (if any).  The idea
+ * is that you *must* call these only once.  The code assumes that the
+ * initial values are the ones the transport specific code requires */
+static inline void
+scsi_transport_reserve_target(struct scsi_transport_template * t, int space)
+{
+	BUG_ON(t->target_private_offset != 0);
+	t->target_private_offset = ALIGN(t->target_size, sizeof(void *));
+	t->target_size = t->target_private_offset + space;
+}
+static inline void
+scsi_transport_reserve_device(struct scsi_transport_template * t, int space)
+{
+	BUG_ON(t->device_private_offset != 0);
+	t->device_private_offset = ALIGN(t->device_size, sizeof(void *));
+	t->device_size = t->device_private_offset + space;
+}
+static inline void *
+scsi_transport_target_data(struct scsi_target *starget)
+{
+	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
+	return (u8 *)starget->starget_data
+		+ shost->transportt->target_private_offset;
+
+}
+static inline void *
+scsi_transport_device_data(struct scsi_device *sdev)
+{
+	struct Scsi_Host *shost = sdev->host;
+	return (u8 *)sdev->sdev_data
+		+ shost->transportt->device_private_offset;
+}
+
+#endif /* SCSI_TRANSPORT_H */
diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h
new file mode 100644
index 00000000..719faf18
--- /dev/null
+++ b/include/scsi/scsi_transport_fc.h
@@ -0,0 +1,843 @@
+/*
+ *  FiberChannel transport specific attributes exported to sysfs.
+ *
+ *  Copyright (c) 2003 Silicon Graphics, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ *  ========
+ *
+ *  Copyright (C) 2004-2007   James Smart, Emulex Corporation
+ *    Rewrite for host, target, device, and remote port attributes,
+ *    statistics, and service functions...
+ *
+ */
+#ifndef SCSI_TRANSPORT_FC_H
+#define SCSI_TRANSPORT_FC_H
+
+#include <linux/sched.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_netlink.h>
+
+struct scsi_transport_template;
+
+/*
+ * FC Port definitions - Following FC HBAAPI guidelines
+ *
+ * Note: Not all binary values for the different fields match HBAAPI.
+ *  Instead, we use densely packed ordinal values or enums.
+ *  We get away with this as we never present the actual binary values
+ *  externally. For sysfs, we always present the string that describes
+ *  the value. Thus, an admin doesn't need a magic HBAAPI decoder ring
+ *  to understand the values. The HBAAPI user-space library is free to
+ *  convert the strings into the HBAAPI-specified binary values.
+ *
+ * Note: Not all HBAAPI-defined values are contained in the definitions
+ *  below. Those not appropriate to an fc_host (e.g. FCP initiator) have
+ *  been removed.
+ */
+
+/*
+ * fc_port_type: If you alter this, you also need to alter scsi_transport_fc.c
+ * (for the ascii descriptions).
+ */
+enum fc_port_type {
+	FC_PORTTYPE_UNKNOWN,
+	FC_PORTTYPE_OTHER,
+	FC_PORTTYPE_NOTPRESENT,
+	FC_PORTTYPE_NPORT,		/* Attached to FPort */
+	FC_PORTTYPE_NLPORT,		/* (Public) Loop w/ FLPort */
+	FC_PORTTYPE_LPORT,		/* (Private) Loop w/o FLPort */
+	FC_PORTTYPE_PTP,		/* Point to Point w/ another NPort */
+	FC_PORTTYPE_NPIV,		/* VPORT based on NPIV */
+};
+
+
+/*
+ * fc_port_state: If you alter this, you also need to alter scsi_transport_fc.c
+ * (for the ascii descriptions).
+ */
+enum fc_port_state {
+	FC_PORTSTATE_UNKNOWN,
+	FC_PORTSTATE_NOTPRESENT,
+	FC_PORTSTATE_ONLINE,
+	FC_PORTSTATE_OFFLINE,		/* User has taken Port Offline */
+	FC_PORTSTATE_BLOCKED,
+	FC_PORTSTATE_BYPASSED,
+	FC_PORTSTATE_DIAGNOSTICS,
+	FC_PORTSTATE_LINKDOWN,
+	FC_PORTSTATE_ERROR,
+	FC_PORTSTATE_LOOPBACK,
+	FC_PORTSTATE_DELETED,
+};
+
+
+/*
+ * fc_vport_state: If you alter this, you also need to alter
+ * scsi_transport_fc.c (for the ascii descriptions).
+ */
+enum fc_vport_state {
+	FC_VPORT_UNKNOWN,
+	FC_VPORT_ACTIVE,
+	FC_VPORT_DISABLED,
+	FC_VPORT_LINKDOWN,
+	FC_VPORT_INITIALIZING,
+	FC_VPORT_NO_FABRIC_SUPP,
+	FC_VPORT_NO_FABRIC_RSCS,
+	FC_VPORT_FABRIC_LOGOUT,
+	FC_VPORT_FABRIC_REJ_WWN,
+	FC_VPORT_FAILED,
+};
+
+
+
+/*
+ * FC Classes of Service
+ * Note: values are not enumerated, as they can be "or'd" together
+ * for reporting (e.g. report supported_classes). If you alter this list,
+ * you also need to alter scsi_transport_fc.c (for the ascii descriptions).
+ */
+#define FC_COS_UNSPECIFIED		0
+#define FC_COS_CLASS1			2
+#define FC_COS_CLASS2			4
+#define FC_COS_CLASS3			8
+#define FC_COS_CLASS4			0x10
+#define FC_COS_CLASS6			0x40
+
+/*
+ * FC Port Speeds
+ * Note: values are not enumerated, as they can be "or'd" together
+ * for reporting (e.g. report supported_speeds). If you alter this list,
+ * you also need to alter scsi_transport_fc.c (for the ascii descriptions).
+ */
+#define FC_PORTSPEED_UNKNOWN		0 /* Unknown - transceiver
+					     incapable of reporting */
+#define FC_PORTSPEED_1GBIT		1
+#define FC_PORTSPEED_2GBIT		2
+#define FC_PORTSPEED_10GBIT		4
+#define FC_PORTSPEED_4GBIT		8
+#define FC_PORTSPEED_8GBIT		0x10
+#define FC_PORTSPEED_16GBIT		0x20
+#define FC_PORTSPEED_NOT_NEGOTIATED	(1 << 15) /* Speed not established */
+
+/*
+ * fc_tgtid_binding_type: If you alter this, you also need to alter
+ * scsi_transport_fc.c (for the ascii descriptions).
+ */
+enum fc_tgtid_binding_type  {
+	FC_TGTID_BIND_NONE,
+	FC_TGTID_BIND_BY_WWPN,
+	FC_TGTID_BIND_BY_WWNN,
+	FC_TGTID_BIND_BY_ID,
+};
+
+/*
+ * FC Port Roles
+ * Note: values are not enumerated, as they can be "or'd" together
+ * for reporting (e.g. report roles). If you alter this list,
+ * you also need to alter scsi_transport_fc.c (for the ascii descriptions).
+ */
+#define FC_PORT_ROLE_UNKNOWN			0x00
+#define FC_PORT_ROLE_FCP_TARGET			0x01
+#define FC_PORT_ROLE_FCP_INITIATOR		0x02
+#define FC_PORT_ROLE_IP_PORT			0x04
+
+/* The following are for compatibility */
+#define FC_RPORT_ROLE_UNKNOWN			FC_PORT_ROLE_UNKNOWN
+#define FC_RPORT_ROLE_FCP_TARGET		FC_PORT_ROLE_FCP_TARGET
+#define FC_RPORT_ROLE_FCP_INITIATOR		FC_PORT_ROLE_FCP_INITIATOR
+#define FC_RPORT_ROLE_IP_PORT			FC_PORT_ROLE_IP_PORT
+
+
+/* Macro for use in defining Virtual Port attributes */
+#define FC_VPORT_ATTR(_name,_mode,_show,_store)		\
+struct device_attribute dev_attr_vport_##_name = 	\
+	__ATTR(_name,_mode,_show,_store)
+
+/*
+ * fc_vport_identifiers: This set of data contains all elements
+ * to uniquely identify and instantiate a FC virtual port.
+ *
+ * Notes:
+ *   symbolic_name: The driver is to append the symbolic_name string data
+ *      to the symbolic_node_name data that it generates by default.
+ *      the resulting combination should then be registered with the switch.
+ *      It is expected that things like Xen may stuff a VM title into
+ *      this field.
+ */
+#define FC_VPORT_SYMBOLIC_NAMELEN		64
+struct fc_vport_identifiers {
+	u64 node_name;
+	u64 port_name;
+	u32 roles;
+	bool disable;
+	enum fc_port_type vport_type;	/* only FC_PORTTYPE_NPIV allowed */
+	char symbolic_name[FC_VPORT_SYMBOLIC_NAMELEN];
+};
+
+/*
+ * FC Virtual Port Attributes
+ *
+ * This structure exists for each FC port is a virtual FC port. Virtual
+ * ports share the physical link with the Physical port. Each virtual
+ * ports has a unique presence on the SAN, and may be instantiated via
+ * NPIV, Virtual Fabrics, or via additional ALPAs. As the vport is a
+ * unique presence, each vport has it's own view of the fabric,
+ * authentication privilege, and priorities.
+ *
+ * A virtual port may support 1 or more FC4 roles. Typically it is a
+ * FCP Initiator. It could be a FCP Target, or exist sole for an IP over FC
+ * roles. FC port attributes for the vport will be reported on any
+ * fc_host class object allocated for an FCP Initiator.
+ *
+ * --
+ *
+ * Fixed attributes are not expected to change. The driver is
+ * expected to set these values after receiving the fc_vport structure
+ * via the vport_create() call from the transport.
+ * The transport fully manages all get functions w/o driver interaction.
+ *
+ * Dynamic attributes are expected to change. The driver participates
+ * in all get/set operations via functions provided by the driver.
+ *
+ * Private attributes are transport-managed values. They are fully
+ * managed by the transport w/o driver interaction.
+ */
+
+struct fc_vport {
+	/* Fixed Attributes */
+
+	/* Dynamic Attributes */
+
+	/* Private (Transport-managed) Attributes */
+	enum fc_vport_state vport_state;
+	enum fc_vport_state vport_last_state;
+	u64 node_name;
+	u64 port_name;
+	u32 roles;
+	u32 vport_id;		/* Admin Identifier for the vport */
+	enum fc_port_type vport_type;
+	char symbolic_name[FC_VPORT_SYMBOLIC_NAMELEN];
+
+	/* exported data */
+	void *dd_data;			/* Used for driver-specific storage */
+
+	/* internal data */
+	struct Scsi_Host *shost;	/* Physical Port Parent */
+	unsigned int channel;
+	u32 number;
+	u8 flags;
+	struct list_head peers;
+	struct device dev;
+	struct work_struct vport_delete_work;
+} __attribute__((aligned(sizeof(unsigned long))));
+
+/* bit field values for struct fc_vport "flags" field: */
+#define FC_VPORT_CREATING		0x01
+#define FC_VPORT_DELETING		0x02
+#define FC_VPORT_DELETED		0x04
+#define FC_VPORT_DEL			0x06	/* Any DELETE state */
+
+#define	dev_to_vport(d)				\
+	container_of(d, struct fc_vport, dev)
+#define transport_class_to_vport(dev)		\
+	dev_to_vport(dev->parent)
+#define vport_to_shost(v)			\
+	(v->shost)
+#define vport_to_shost_channel(v)		\
+	(v->channel)
+#define vport_to_parent(v)			\
+	(v->dev.parent)
+
+
+/* Error return codes for vport_create() callback */
+#define VPCERR_UNSUPPORTED		-ENOSYS		/* no driver/adapter
+							   support */
+#define VPCERR_BAD_WWN			-ENOTUNIQ	/* driver validation
+							   of WWNs failed */
+#define VPCERR_NO_FABRIC_SUPP		-EOPNOTSUPP	/* Fabric connection
+							   is loop or the
+							   Fabric Port does
+							   not support NPIV */
+
+/*
+ * fc_rport_identifiers: This set of data contains all elements
+ * to uniquely identify a remote FC port. The driver uses this data
+ * to report the existence of a remote FC port in the topology. Internally,
+ * the transport uses this data for attributes and to manage consistent
+ * target id bindings.
+ */
+struct fc_rport_identifiers {
+	u64 node_name;
+	u64 port_name;
+	u32 port_id;
+	u32 roles;
+};
+
+
+/* Macro for use in defining Remote Port attributes */
+#define FC_RPORT_ATTR(_name,_mode,_show,_store)				\
+struct device_attribute dev_attr_rport_##_name = 	\
+	__ATTR(_name,_mode,_show,_store)
+
+
+/*
+ * FC Remote Port Attributes
+ *
+ * This structure exists for each remote FC port that a LLDD notifies
+ * the subsystem of.  A remote FC port may or may not be a SCSI Target,
+ * also be a SCSI initiator, IP endpoint, etc. As such, the remote
+ * port is considered a separate entity, independent of "role" (such
+ * as scsi target).
+ *
+ * --
+ *
+ * Attributes are based on HBAAPI V2.0 definitions. Only those
+ * attributes that are determinable by the local port (aka Host)
+ * are contained.
+ *
+ * Fixed attributes are not expected to change. The driver is
+ * expected to set these values after successfully calling
+ * fc_remote_port_add(). The transport fully manages all get functions
+ * w/o driver interaction.
+ *
+ * Dynamic attributes are expected to change. The driver participates
+ * in all get/set operations via functions provided by the driver.
+ *
+ * Private attributes are transport-managed values. They are fully
+ * managed by the transport w/o driver interaction.
+ */
+
+struct fc_rport {	/* aka fc_starget_attrs */
+	/* Fixed Attributes */
+	u32 maxframe_size;
+	u32 supported_classes;
+
+	/* Dynamic Attributes */
+	u32 dev_loss_tmo;	/* Remote Port loss timeout in seconds. */
+
+	/* Private (Transport-managed) Attributes */
+	u64 node_name;
+	u64 port_name;
+	u32 port_id;
+	u32 roles;
+	enum fc_port_state port_state;	/* Will only be ONLINE or UNKNOWN */
+	u32 scsi_target_id;
+	u32 fast_io_fail_tmo;
+
+	/* exported data */
+	void *dd_data;			/* Used for driver-specific storage */
+
+	/* internal data */
+	unsigned int channel;
+	u32 number;
+	u8 flags;
+	struct list_head peers;
+	struct device dev;
+ 	struct delayed_work dev_loss_work;
+ 	struct work_struct scan_work;
+ 	struct delayed_work fail_io_work;
+ 	struct work_struct stgt_delete_work;
+	struct work_struct rport_delete_work;
+	struct request_queue *rqst_q;	/* bsg support */
+} __attribute__((aligned(sizeof(unsigned long))));
+
+/* bit field values for struct fc_rport "flags" field: */
+#define FC_RPORT_DEVLOSS_PENDING	0x01
+#define FC_RPORT_SCAN_PENDING		0x02
+#define FC_RPORT_FAST_FAIL_TIMEDOUT	0x04
+#define FC_RPORT_DEVLOSS_CALLBK_DONE	0x08
+
+#define	dev_to_rport(d)				\
+	container_of(d, struct fc_rport, dev)
+#define transport_class_to_rport(dev)	\
+	dev_to_rport(dev->parent)
+#define rport_to_shost(r)			\
+	dev_to_shost(r->dev.parent)
+
+/*
+ * FC SCSI Target Attributes
+ *
+ * The SCSI Target is considered an extension of a remote port (as
+ * a remote port can be more than a SCSI Target). Within the scsi
+ * subsystem, we leave the Target as a separate entity. Doing so
+ * provides backward compatibility with prior FC transport api's,
+ * and lets remote ports be handled entirely within the FC transport
+ * and independently from the scsi subsystem. The drawback is that
+ * some data will be duplicated.
+ */
+
+struct fc_starget_attrs {	/* aka fc_target_attrs */
+	/* Dynamic Attributes */
+	u64 node_name;
+	u64 port_name;
+	u32 port_id;
+};
+
+#define fc_starget_node_name(x) \
+	(((struct fc_starget_attrs *)&(x)->starget_data)->node_name)
+#define fc_starget_port_name(x)	\
+	(((struct fc_starget_attrs *)&(x)->starget_data)->port_name)
+#define fc_starget_port_id(x) \
+	(((struct fc_starget_attrs *)&(x)->starget_data)->port_id)
+
+#define starget_to_rport(s)			\
+	scsi_is_fc_rport(s->dev.parent) ? dev_to_rport(s->dev.parent) : NULL
+
+
+/*
+ * FC Local Port (Host) Statistics
+ */
+
+/* FC Statistics - Following FC HBAAPI v2.0 guidelines */
+struct fc_host_statistics {
+	/* port statistics */
+	u64 seconds_since_last_reset;
+	u64 tx_frames;
+	u64 tx_words;
+	u64 rx_frames;
+	u64 rx_words;
+	u64 lip_count;
+	u64 nos_count;
+	u64 error_frames;
+	u64 dumped_frames;
+	u64 link_failure_count;
+	u64 loss_of_sync_count;
+	u64 loss_of_signal_count;
+	u64 prim_seq_protocol_err_count;
+	u64 invalid_tx_word_count;
+	u64 invalid_crc_count;
+
+	/* fc4 statistics  (only FCP supported currently) */
+	u64 fcp_input_requests;
+	u64 fcp_output_requests;
+	u64 fcp_control_requests;
+	u64 fcp_input_megabytes;
+	u64 fcp_output_megabytes;
+};
+
+
+/*
+ * FC Event Codes - Polled and Async, following FC HBAAPI v2.0 guidelines
+ */
+
+/*
+ * fc_host_event_code: If you alter this, you also need to alter
+ * scsi_transport_fc.c (for the ascii descriptions).
+ */
+enum fc_host_event_code  {
+	FCH_EVT_LIP			= 0x1,
+	FCH_EVT_LINKUP			= 0x2,
+	FCH_EVT_LINKDOWN		= 0x3,
+	FCH_EVT_LIPRESET		= 0x4,
+	FCH_EVT_RSCN			= 0x5,
+	FCH_EVT_ADAPTER_CHANGE		= 0x103,
+	FCH_EVT_PORT_UNKNOWN		= 0x200,
+	FCH_EVT_PORT_OFFLINE		= 0x201,
+	FCH_EVT_PORT_ONLINE		= 0x202,
+	FCH_EVT_PORT_FABRIC		= 0x204,
+	FCH_EVT_LINK_UNKNOWN		= 0x500,
+	FCH_EVT_VENDOR_UNIQUE		= 0xffff,
+};
+
+
+/*
+ * FC Local Port (Host) Attributes
+ *
+ * Attributes are based on HBAAPI V2.0 definitions.
+ * Note: OSDeviceName is determined by user-space library
+ *
+ * Fixed attributes are not expected to change. The driver is
+ * expected to set these values after successfully calling scsi_add_host().
+ * The transport fully manages all get functions w/o driver interaction.
+ *
+ * Dynamic attributes are expected to change. The driver participates
+ * in all get/set operations via functions provided by the driver.
+ *
+ * Private attributes are transport-managed values. They are fully
+ * managed by the transport w/o driver interaction.
+ */
+
+#define FC_FC4_LIST_SIZE		32
+#define FC_SYMBOLIC_NAME_SIZE		256
+#define FC_VERSION_STRING_SIZE		64
+#define FC_SERIAL_NUMBER_SIZE		80
+
+struct fc_host_attrs {
+	/* Fixed Attributes */
+	u64 node_name;
+	u64 port_name;
+	u64 permanent_port_name;
+	u32 supported_classes;
+	u8  supported_fc4s[FC_FC4_LIST_SIZE];
+	u32 supported_speeds;
+	u32 maxframe_size;
+	u16 max_npiv_vports;
+	char serial_number[FC_SERIAL_NUMBER_SIZE];
+	char manufacturer[FC_SERIAL_NUMBER_SIZE];
+	char model[FC_SYMBOLIC_NAME_SIZE];
+	char model_description[FC_SYMBOLIC_NAME_SIZE];
+	char hardware_version[FC_VERSION_STRING_SIZE];
+	char driver_version[FC_VERSION_STRING_SIZE];
+	char firmware_version[FC_VERSION_STRING_SIZE];
+	char optionrom_version[FC_VERSION_STRING_SIZE];
+
+	/* Dynamic Attributes */
+	u32 port_id;
+	enum fc_port_type port_type;
+	enum fc_port_state port_state;
+	u8  active_fc4s[FC_FC4_LIST_SIZE];
+	u32 speed;
+	u64 fabric_name;
+	char symbolic_name[FC_SYMBOLIC_NAME_SIZE];
+	char system_hostname[FC_SYMBOLIC_NAME_SIZE];
+	u32 dev_loss_tmo;
+
+	/* Private (Transport-managed) Attributes */
+	enum fc_tgtid_binding_type  tgtid_bind_type;
+
+	/* internal data */
+	struct list_head rports;
+	struct list_head rport_bindings;
+	struct list_head vports;
+	u32 next_rport_number;
+	u32 next_target_id;
+	u32 next_vport_number;
+	u16 npiv_vports_inuse;
+
+	/* work queues for rport state manipulation */
+	char work_q_name[20];
+	struct workqueue_struct *work_q;
+	char devloss_work_q_name[20];
+	struct workqueue_struct *devloss_work_q;
+
+	/* bsg support */
+	struct request_queue *rqst_q;
+};
+
+#define shost_to_fc_host(x) \
+	((struct fc_host_attrs *)(x)->shost_data)
+
+#define fc_host_node_name(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->node_name)
+#define fc_host_port_name(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->port_name)
+#define fc_host_permanent_port_name(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->permanent_port_name)
+#define fc_host_supported_classes(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->supported_classes)
+#define fc_host_supported_fc4s(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->supported_fc4s)
+#define fc_host_supported_speeds(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->supported_speeds)
+#define fc_host_maxframe_size(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->maxframe_size)
+#define fc_host_max_npiv_vports(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->max_npiv_vports)
+#define fc_host_serial_number(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->serial_number)
+#define fc_host_manufacturer(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->manufacturer)
+#define fc_host_model(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->model)
+#define fc_host_model_description(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->model_description)
+#define fc_host_hardware_version(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->hardware_version)
+#define fc_host_driver_version(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->driver_version)
+#define fc_host_firmware_version(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->firmware_version)
+#define fc_host_optionrom_version(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->optionrom_version)
+#define fc_host_port_id(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->port_id)
+#define fc_host_port_type(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->port_type)
+#define fc_host_port_state(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->port_state)
+#define fc_host_active_fc4s(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->active_fc4s)
+#define fc_host_speed(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->speed)
+#define fc_host_fabric_name(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->fabric_name)
+#define fc_host_symbolic_name(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->symbolic_name)
+#define fc_host_system_hostname(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->system_hostname)
+#define fc_host_tgtid_bind_type(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->tgtid_bind_type)
+#define fc_host_rports(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->rports)
+#define fc_host_rport_bindings(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->rport_bindings)
+#define fc_host_vports(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->vports)
+#define fc_host_next_rport_number(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->next_rport_number)
+#define fc_host_next_target_id(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->next_target_id)
+#define fc_host_next_vport_number(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->next_vport_number)
+#define fc_host_npiv_vports_inuse(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->npiv_vports_inuse)
+#define fc_host_work_q_name(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->work_q_name)
+#define fc_host_work_q(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->work_q)
+#define fc_host_devloss_work_q_name(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->devloss_work_q_name)
+#define fc_host_devloss_work_q(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->devloss_work_q)
+#define fc_host_dev_loss_tmo(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->dev_loss_tmo)
+
+
+struct fc_bsg_buffer {
+	unsigned int payload_len;
+	int sg_cnt;
+	struct scatterlist *sg_list;
+};
+
+/* Values for fc_bsg_job->state_flags (bitflags) */
+#define FC_RQST_STATE_INPROGRESS	0
+#define FC_RQST_STATE_DONE		1
+
+struct fc_bsg_job {
+	struct Scsi_Host *shost;
+	struct fc_rport *rport;
+	struct device *dev;
+	struct request *req;
+	spinlock_t job_lock;
+	unsigned int state_flags;
+	unsigned int ref_cnt;
+	void (*job_done)(struct fc_bsg_job *);
+
+	struct fc_bsg_request *request;
+	struct fc_bsg_reply *reply;
+	unsigned int request_len;
+	unsigned int reply_len;
+	/*
+	 * On entry : reply_len indicates the buffer size allocated for
+	 * the reply.
+	 *
+	 * Upon completion : the message handler must set reply_len
+	 *  to indicates the size of the reply to be returned to the
+	 *  caller.
+	 */
+
+	/* DMA payloads for the request/response */
+	struct fc_bsg_buffer request_payload;
+	struct fc_bsg_buffer reply_payload;
+
+	void *dd_data;			/* Used for driver-specific storage */
+};
+
+
+/* The functions by which the transport class and the driver communicate */
+struct fc_function_template {
+	void    (*get_rport_dev_loss_tmo)(struct fc_rport *);
+	void	(*set_rport_dev_loss_tmo)(struct fc_rport *, u32);
+
+	void	(*get_starget_node_name)(struct scsi_target *);
+	void	(*get_starget_port_name)(struct scsi_target *);
+	void 	(*get_starget_port_id)(struct scsi_target *);
+
+	void 	(*get_host_port_id)(struct Scsi_Host *);
+	void	(*get_host_port_type)(struct Scsi_Host *);
+	void	(*get_host_port_state)(struct Scsi_Host *);
+	void	(*get_host_active_fc4s)(struct Scsi_Host *);
+	void	(*get_host_speed)(struct Scsi_Host *);
+	void	(*get_host_fabric_name)(struct Scsi_Host *);
+	void	(*get_host_symbolic_name)(struct Scsi_Host *);
+	void	(*set_host_system_hostname)(struct Scsi_Host *);
+
+	struct fc_host_statistics * (*get_fc_host_stats)(struct Scsi_Host *);
+	void	(*reset_fc_host_stats)(struct Scsi_Host *);
+
+	int	(*issue_fc_host_lip)(struct Scsi_Host *);
+
+	void    (*dev_loss_tmo_callbk)(struct fc_rport *);
+	void	(*terminate_rport_io)(struct fc_rport *);
+
+	void	(*set_vport_symbolic_name)(struct fc_vport *);
+	int  	(*vport_create)(struct fc_vport *, bool);
+	int	(*vport_disable)(struct fc_vport *, bool);
+	int  	(*vport_delete)(struct fc_vport *);
+
+	/* target-mode drivers' functions */
+	int     (* tsk_mgmt_response)(struct Scsi_Host *, u64, u64, int);
+	int     (* it_nexus_response)(struct Scsi_Host *, u64, int);
+
+	/* bsg support */
+	int	(*bsg_request)(struct fc_bsg_job *);
+	int	(*bsg_timeout)(struct fc_bsg_job *);
+
+	/* allocation lengths for host-specific data */
+	u32	 			dd_fcrport_size;
+	u32	 			dd_fcvport_size;
+	u32				dd_bsg_size;
+
+	/*
+	 * The driver sets these to tell the transport class it
+	 * wants the attributes displayed in sysfs.  If the show_ flag
+	 * is not set, the attribute will be private to the transport
+	 * class
+	 */
+
+	/* remote port fixed attributes */
+	unsigned long	show_rport_maxframe_size:1;
+	unsigned long	show_rport_supported_classes:1;
+	unsigned long   show_rport_dev_loss_tmo:1;
+
+	/*
+	 * target dynamic attributes
+	 * These should all be "1" if the driver uses the remote port
+	 * add/delete functions (so attributes reflect rport values).
+	 */
+	unsigned long	show_starget_node_name:1;
+	unsigned long	show_starget_port_name:1;
+	unsigned long	show_starget_port_id:1;
+
+	/* host fixed attributes */
+	unsigned long	show_host_node_name:1;
+	unsigned long	show_host_port_name:1;
+	unsigned long	show_host_permanent_port_name:1;
+	unsigned long	show_host_supported_classes:1;
+	unsigned long	show_host_supported_fc4s:1;
+	unsigned long	show_host_supported_speeds:1;
+	unsigned long	show_host_maxframe_size:1;
+	unsigned long	show_host_serial_number:1;
+	unsigned long	show_host_manufacturer:1;
+	unsigned long	show_host_model:1;
+	unsigned long	show_host_model_description:1;
+	unsigned long	show_host_hardware_version:1;
+	unsigned long	show_host_driver_version:1;
+	unsigned long	show_host_firmware_version:1;
+	unsigned long	show_host_optionrom_version:1;
+	/* host dynamic attributes */
+	unsigned long	show_host_port_id:1;
+	unsigned long	show_host_port_type:1;
+	unsigned long	show_host_port_state:1;
+	unsigned long	show_host_active_fc4s:1;
+	unsigned long	show_host_speed:1;
+	unsigned long	show_host_fabric_name:1;
+	unsigned long	show_host_symbolic_name:1;
+	unsigned long	show_host_system_hostname:1;
+
+	unsigned long	disable_target_scan:1;
+};
+
+
+/**
+ * fc_remote_port_chkready - called to validate the remote port state
+ *   prior to initiating io to the port.
+ *
+ * Returns a scsi result code that can be returned by the LLDD.
+ *
+ * @rport:	remote port to be checked
+ **/
+static inline int
+fc_remote_port_chkready(struct fc_rport *rport)
+{
+	int result;
+
+	switch (rport->port_state) {
+	case FC_PORTSTATE_ONLINE:
+		if (rport->roles & FC_PORT_ROLE_FCP_TARGET)
+			result = 0;
+		else if (rport->flags & FC_RPORT_DEVLOSS_PENDING)
+			result = DID_IMM_RETRY << 16;
+		else
+			result = DID_NO_CONNECT << 16;
+		break;
+	case FC_PORTSTATE_BLOCKED:
+		if (rport->flags & FC_RPORT_FAST_FAIL_TIMEDOUT)
+			result = DID_TRANSPORT_FAILFAST << 16;
+		else
+			result = DID_IMM_RETRY << 16;
+		break;
+	default:
+		result = DID_NO_CONNECT << 16;
+		break;
+	}
+	return result;
+}
+
+static inline u64 wwn_to_u64(u8 *wwn)
+{
+	return (u64)wwn[0] << 56 | (u64)wwn[1] << 48 |
+	    (u64)wwn[2] << 40 | (u64)wwn[3] << 32 |
+	    (u64)wwn[4] << 24 | (u64)wwn[5] << 16 |
+	    (u64)wwn[6] <<  8 | (u64)wwn[7];
+}
+
+static inline void u64_to_wwn(u64 inm, u8 *wwn)
+{
+	wwn[0] = (inm >> 56) & 0xff;
+	wwn[1] = (inm >> 48) & 0xff;
+	wwn[2] = (inm >> 40) & 0xff;
+	wwn[3] = (inm >> 32) & 0xff;
+	wwn[4] = (inm >> 24) & 0xff;
+	wwn[5] = (inm >> 16) & 0xff;
+	wwn[6] = (inm >> 8) & 0xff;
+	wwn[7] = inm & 0xff;
+}
+
+/**
+ * fc_vport_set_state() - called to set a vport's state. Saves the old state,
+ *   excepting the transitory states of initializing and sending the ELS
+ *   traffic to instantiate the vport on the link.
+ *
+ * Assumes the driver has surrounded this with the proper locking to ensure
+ * a coherent state change.
+ *
+ * @vport:	virtual port whose state is changing
+ * @new_state:  new state
+ **/
+static inline void
+fc_vport_set_state(struct fc_vport *vport, enum fc_vport_state new_state)
+{
+	if ((new_state != FC_VPORT_UNKNOWN) &&
+	    (new_state != FC_VPORT_INITIALIZING))
+		vport->vport_last_state = vport->vport_state;
+	vport->vport_state = new_state;
+}
+
+struct scsi_transport_template *fc_attach_transport(
+			struct fc_function_template *);
+void fc_release_transport(struct scsi_transport_template *);
+void fc_remove_host(struct Scsi_Host *);
+struct fc_rport *fc_remote_port_add(struct Scsi_Host *shost,
+			int channel, struct fc_rport_identifiers  *ids);
+void fc_remote_port_delete(struct fc_rport  *rport);
+void fc_remote_port_rolechg(struct fc_rport  *rport, u32 roles);
+int scsi_is_fc_rport(const struct device *);
+u32 fc_get_event_number(void);
+void fc_host_post_event(struct Scsi_Host *shost, u32 event_number,
+		enum fc_host_event_code event_code, u32 event_data);
+void fc_host_post_vendor_event(struct Scsi_Host *shost, u32 event_number,
+		u32 data_len, char * data_buf, u64 vendor_id);
+	/* Note: when specifying vendor_id to fc_host_post_vendor_event()
+	 *   be sure to read the Vendor Type and ID formatting requirements
+	 *   specified in scsi_netlink.h
+	 */
+struct fc_vport *fc_vport_create(struct Scsi_Host *shost, int channel,
+		struct fc_vport_identifiers *);
+int fc_vport_terminate(struct fc_vport *vport);
+int fc_block_scsi_eh(struct scsi_cmnd *cmnd);
+
+#endif /* SCSI_TRANSPORT_FC_H */
diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h
new file mode 100644
index 00000000..53f0b361
--- /dev/null
+++ b/include/scsi/scsi_transport_iscsi.h
@@ -0,0 +1,333 @@
+/*
+ * iSCSI transport class definitions
+ *
+ * Copyright (C) IBM Corporation, 2004
+ * Copyright (C) Mike Christie, 2004 - 2006
+ * Copyright (C) Dmitry Yusupov, 2004 - 2005
+ * Copyright (C) Alex Aizman, 2004 - 2005
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#ifndef SCSI_TRANSPORT_ISCSI_H
+#define SCSI_TRANSPORT_ISCSI_H
+
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <scsi/iscsi_if.h>
+
+struct scsi_transport_template;
+struct iscsi_transport;
+struct iscsi_endpoint;
+struct Scsi_Host;
+struct scsi_cmnd;
+struct iscsi_cls_conn;
+struct iscsi_conn;
+struct iscsi_task;
+struct sockaddr;
+struct iscsi_iface;
+struct bsg_job;
+
+/**
+ * struct iscsi_transport - iSCSI Transport template
+ *
+ * @name:		transport name
+ * @caps:		iSCSI Data-Path capabilities
+ * @create_session:	create new iSCSI session object
+ * @destroy_session:	destroy existing iSCSI session object
+ * @create_conn:	create new iSCSI connection
+ * @bind_conn:		associate this connection with existing iSCSI session
+ *			and specified transport descriptor
+ * @destroy_conn:	destroy inactive iSCSI connection
+ * @set_param:		set iSCSI parameter. Return 0 on success, -ENODATA
+ *			when param is not supported, and a -Exx value on other
+ *			error.
+ * @get_param		get iSCSI parameter. Must return number of bytes
+ *			copied to buffer on success, -ENODATA when param
+ *			is not supported, and a -Exx value on other error
+ * @start_conn:		set connection to be operational
+ * @stop_conn:		suspend/recover/terminate connection
+ * @send_pdu:		send iSCSI PDU, Login, Logout, NOP-Out, Reject, Text.
+ * @session_recovery_timedout: notify LLD a block during recovery timed out
+ * @init_task:		Initialize a iscsi_task and any internal structs.
+ *			When offloading the data path, this is called from
+ *			queuecommand with the session lock, or from the
+ *			iscsi_conn_send_pdu context with the session lock.
+ *			When not offloading the data path, this is called
+ *			from the scsi work queue without the session lock.
+ * @xmit_task		Requests LLD to transfer cmd task. Returns 0 or the
+ *			the number of bytes transferred on success, and -Exyz
+ *			value on error. When offloading the data path, this
+ *			is called from queuecommand with the session lock, or
+ *			from the iscsi_conn_send_pdu context with the session
+ *			lock. When not offloading the data path, this is called
+ *			from the scsi work queue without the session lock.
+ * @cleanup_task:	requests LLD to fail task. Called with session lock
+ *			and after the connection has been suspended and
+ *			terminated during recovery. If called
+ *			from abort task then connection is not suspended
+ *			or terminated but sk_callback_lock is held
+ *
+ * Template API provided by iSCSI Transport
+ */
+struct iscsi_transport {
+	struct module *owner;
+	char *name;
+	unsigned int caps;
+
+	struct iscsi_cls_session *(*create_session) (struct iscsi_endpoint *ep,
+					uint16_t cmds_max, uint16_t qdepth,
+					uint32_t sn);
+	void (*destroy_session) (struct iscsi_cls_session *session);
+	struct iscsi_cls_conn *(*create_conn) (struct iscsi_cls_session *sess,
+				uint32_t cid);
+	int (*bind_conn) (struct iscsi_cls_session *session,
+			  struct iscsi_cls_conn *cls_conn,
+			  uint64_t transport_eph, int is_leading);
+	int (*start_conn) (struct iscsi_cls_conn *conn);
+	void (*stop_conn) (struct iscsi_cls_conn *conn, int flag);
+	void (*destroy_conn) (struct iscsi_cls_conn *conn);
+	int (*set_param) (struct iscsi_cls_conn *conn, enum iscsi_param param,
+			  char *buf, int buflen);
+	int (*get_ep_param) (struct iscsi_endpoint *ep, enum iscsi_param param,
+			     char *buf);
+	int (*get_conn_param) (struct iscsi_cls_conn *conn,
+			       enum iscsi_param param, char *buf);
+	int (*get_session_param) (struct iscsi_cls_session *session,
+				  enum iscsi_param param, char *buf);
+	int (*get_host_param) (struct Scsi_Host *shost,
+				enum iscsi_host_param param, char *buf);
+	int (*set_host_param) (struct Scsi_Host *shost,
+			       enum iscsi_host_param param, char *buf,
+			       int buflen);
+	int (*send_pdu) (struct iscsi_cls_conn *conn, struct iscsi_hdr *hdr,
+			 char *data, uint32_t data_size);
+	void (*get_stats) (struct iscsi_cls_conn *conn,
+			   struct iscsi_stats *stats);
+
+	int (*init_task) (struct iscsi_task *task);
+	int (*xmit_task) (struct iscsi_task *task);
+	void (*cleanup_task) (struct iscsi_task *task);
+
+	int (*alloc_pdu) (struct iscsi_task *task, uint8_t opcode);
+	int (*xmit_pdu) (struct iscsi_task *task);
+	int (*init_pdu) (struct iscsi_task *task, unsigned int offset,
+			 unsigned int count);
+	void (*parse_pdu_itt) (struct iscsi_conn *conn, itt_t itt,
+			       int *index, int *age);
+
+	void (*session_recovery_timedout) (struct iscsi_cls_session *session);
+	struct iscsi_endpoint *(*ep_connect) (struct Scsi_Host *shost,
+					      struct sockaddr *dst_addr,
+					      int non_blocking);
+	int (*ep_poll) (struct iscsi_endpoint *ep, int timeout_ms);
+	void (*ep_disconnect) (struct iscsi_endpoint *ep);
+	int (*tgt_dscvr) (struct Scsi_Host *shost, enum iscsi_tgt_dscvr type,
+			  uint32_t enable, struct sockaddr *dst_addr);
+	int (*set_path) (struct Scsi_Host *shost, struct iscsi_path *params);
+	int (*set_iface_param) (struct Scsi_Host *shost, void *data,
+				uint32_t len);
+	int (*get_iface_param) (struct iscsi_iface *iface,
+				enum iscsi_param_type param_type,
+				int param, char *buf);
+	umode_t (*attr_is_visible)(int param_type, int param);
+	int (*bsg_request)(struct bsg_job *job);
+	int (*send_ping) (struct Scsi_Host *shost, uint32_t iface_num,
+			  uint32_t iface_type, uint32_t payload_size,
+			  uint32_t pid, struct sockaddr *dst_addr);
+	int (*get_chap) (struct Scsi_Host *shost, uint16_t chap_tbl_idx,
+			 uint32_t *num_entries, char *buf);
+	int (*delete_chap) (struct Scsi_Host *shost, uint16_t chap_tbl_idx);
+};
+
+/*
+ * transport registration upcalls
+ */
+extern struct scsi_transport_template *iscsi_register_transport(struct iscsi_transport *tt);
+extern int iscsi_unregister_transport(struct iscsi_transport *tt);
+
+/*
+ * control plane upcalls
+ */
+extern void iscsi_conn_error_event(struct iscsi_cls_conn *conn,
+				   enum iscsi_err error);
+extern void iscsi_conn_login_event(struct iscsi_cls_conn *conn,
+				   enum iscsi_conn_state state);
+extern int iscsi_recv_pdu(struct iscsi_cls_conn *conn, struct iscsi_hdr *hdr,
+			  char *data, uint32_t data_size);
+
+extern int iscsi_offload_mesg(struct Scsi_Host *shost,
+			      struct iscsi_transport *transport, uint32_t type,
+			      char *data, uint16_t data_size);
+
+extern void iscsi_post_host_event(uint32_t host_no,
+				  struct iscsi_transport *transport,
+				  enum iscsi_host_event_code code,
+				  uint32_t data_size,
+				  uint8_t *data);
+
+extern void iscsi_ping_comp_event(uint32_t host_no,
+				  struct iscsi_transport *transport,
+				  uint32_t status, uint32_t pid,
+				  uint32_t data_size, uint8_t *data);
+
+struct iscsi_cls_conn {
+	struct list_head conn_list;	/* item in connlist */
+	void *dd_data;			/* LLD private data */
+	struct iscsi_transport *transport;
+	uint32_t cid;			/* connection id */
+	struct mutex ep_mutex;
+	struct iscsi_endpoint *ep;
+
+	struct device dev;		/* sysfs transport/container device */
+};
+
+#define iscsi_dev_to_conn(_dev) \
+	container_of(_dev, struct iscsi_cls_conn, dev)
+
+#define transport_class_to_conn(_cdev) \
+	iscsi_dev_to_conn(_cdev->parent)
+
+#define iscsi_conn_to_session(_conn) \
+	iscsi_dev_to_session(_conn->dev.parent)
+
+/* iscsi class session state */
+enum {
+	ISCSI_SESSION_LOGGED_IN,
+	ISCSI_SESSION_FAILED,
+	ISCSI_SESSION_FREE,
+};
+
+#define ISCSI_MAX_TARGET -1
+
+struct iscsi_cls_session {
+	struct list_head sess_list;		/* item in session_list */
+	struct iscsi_transport *transport;
+	spinlock_t lock;
+	struct work_struct block_work;
+	struct work_struct unblock_work;
+	struct work_struct scan_work;
+	struct work_struct unbind_work;
+
+	/* recovery fields */
+	int recovery_tmo;
+	struct delayed_work recovery_work;
+
+	unsigned int target_id;
+	bool ida_used;
+
+	/*
+	 * pid of userspace process that created session or -1 if
+	 * created by the kernel.
+	 */
+	pid_t creator;
+	int state;
+	int sid;				/* session id */
+	void *dd_data;				/* LLD private data */
+	struct device dev;	/* sysfs transport/container device */
+};
+
+#define iscsi_dev_to_session(_dev) \
+	container_of(_dev, struct iscsi_cls_session, dev)
+
+#define transport_class_to_session(_cdev) \
+	iscsi_dev_to_session(_cdev->parent)
+
+#define iscsi_session_to_shost(_session) \
+	dev_to_shost(_session->dev.parent)
+
+#define starget_to_session(_stgt) \
+	iscsi_dev_to_session(_stgt->dev.parent)
+
+struct iscsi_cls_host {
+	atomic_t nr_scans;
+	struct mutex mutex;
+	struct request_queue *bsg_q;
+	uint32_t port_speed;
+	uint32_t port_state;
+};
+
+#define iscsi_job_to_shost(_job) \
+        dev_to_shost(_job->dev)
+
+extern void iscsi_host_for_each_session(struct Scsi_Host *shost,
+				void (*fn)(struct iscsi_cls_session *));
+
+struct iscsi_endpoint {
+	void *dd_data;			/* LLD private data */
+	struct device dev;
+	uint64_t id;
+	struct iscsi_cls_conn *conn;
+};
+
+struct iscsi_iface {
+	struct device dev;
+	struct iscsi_transport *transport;
+	uint32_t iface_type;	/* IPv4 or IPv6 */
+	uint32_t iface_num;	/* iface number, 0 - n */
+	void *dd_data;		/* LLD private data */
+};
+
+#define iscsi_dev_to_iface(_dev) \
+	container_of(_dev, struct iscsi_iface, dev)
+
+#define iscsi_iface_to_shost(_iface) \
+	dev_to_shost(_iface->dev.parent)
+
+/*
+ * session and connection functions that can be used by HW iSCSI LLDs
+ */
+#define iscsi_cls_session_printk(prefix, _cls_session, fmt, a...) \
+	dev_printk(prefix, &(_cls_session)->dev, fmt, ##a)
+
+#define iscsi_cls_conn_printk(prefix, _cls_conn, fmt, a...) \
+	dev_printk(prefix, &(_cls_conn)->dev, fmt, ##a)
+
+extern int iscsi_session_chkready(struct iscsi_cls_session *session);
+extern int iscsi_is_session_online(struct iscsi_cls_session *session);
+extern struct iscsi_cls_session *iscsi_alloc_session(struct Scsi_Host *shost,
+				struct iscsi_transport *transport, int dd_size);
+extern int iscsi_add_session(struct iscsi_cls_session *session,
+			     unsigned int target_id);
+extern int iscsi_session_event(struct iscsi_cls_session *session,
+			       enum iscsi_uevent_e event);
+extern struct iscsi_cls_session *iscsi_create_session(struct Scsi_Host *shost,
+						struct iscsi_transport *t,
+						int dd_size,
+						unsigned int target_id);
+extern void iscsi_remove_session(struct iscsi_cls_session *session);
+extern void iscsi_free_session(struct iscsi_cls_session *session);
+extern int iscsi_destroy_session(struct iscsi_cls_session *session);
+extern struct iscsi_cls_conn *iscsi_create_conn(struct iscsi_cls_session *sess,
+						int dd_size, uint32_t cid);
+extern int iscsi_destroy_conn(struct iscsi_cls_conn *conn);
+extern void iscsi_unblock_session(struct iscsi_cls_session *session);
+extern void iscsi_block_session(struct iscsi_cls_session *session);
+extern int iscsi_scan_finished(struct Scsi_Host *shost, unsigned long time);
+extern struct iscsi_endpoint *iscsi_create_endpoint(int dd_size);
+extern void iscsi_destroy_endpoint(struct iscsi_endpoint *ep);
+extern struct iscsi_endpoint *iscsi_lookup_endpoint(u64 handle);
+extern int iscsi_block_scsi_eh(struct scsi_cmnd *cmd);
+extern struct iscsi_iface *iscsi_create_iface(struct Scsi_Host *shost,
+					      struct iscsi_transport *t,
+					      uint32_t iface_type,
+					      uint32_t iface_num, int dd_size);
+extern void iscsi_destroy_iface(struct iscsi_iface *iface);
+extern struct iscsi_iface *iscsi_lookup_iface(int handle);
+extern char *iscsi_get_port_speed_name(struct Scsi_Host *shost);
+extern char *iscsi_get_port_state_name(struct Scsi_Host *shost);
+extern int iscsi_is_session_dev(const struct device *dev);
+
+#endif
diff --git a/include/scsi/scsi_transport_sas.h b/include/scsi/scsi_transport_sas.h
new file mode 100644
index 00000000..98b3a20a
--- /dev/null
+++ b/include/scsi/scsi_transport_sas.h
@@ -0,0 +1,237 @@
+#ifndef SCSI_TRANSPORT_SAS_H
+#define SCSI_TRANSPORT_SAS_H
+
+#include <linux/transport_class.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <scsi/sas.h>
+
+struct scsi_transport_template;
+struct sas_rphy;
+struct request;
+
+enum sas_device_type {
+	SAS_PHY_UNUSED = 0,
+	SAS_END_DEVICE = 1,
+	SAS_EDGE_EXPANDER_DEVICE = 2,
+	SAS_FANOUT_EXPANDER_DEVICE = 3,
+};
+
+static inline int sas_protocol_ata(enum sas_protocol proto)
+{
+	return ((proto & SAS_PROTOCOL_SATA) ||
+		(proto & SAS_PROTOCOL_STP))? 1 : 0;
+}
+
+enum sas_linkrate {
+	/* These Values are defined in the SAS standard */
+	SAS_LINK_RATE_UNKNOWN = 0,
+	SAS_PHY_DISABLED = 1,
+	SAS_PHY_RESET_PROBLEM = 2,
+	SAS_SATA_SPINUP_HOLD = 3,
+	SAS_SATA_PORT_SELECTOR = 4,
+	SAS_PHY_RESET_IN_PROGRESS = 5,
+	SAS_LINK_RATE_1_5_GBPS = 8,
+	SAS_LINK_RATE_G1 = SAS_LINK_RATE_1_5_GBPS,
+	SAS_LINK_RATE_3_0_GBPS = 9,
+	SAS_LINK_RATE_G2 = SAS_LINK_RATE_3_0_GBPS,
+	SAS_LINK_RATE_6_0_GBPS = 10,
+	/* These are virtual to the transport class and may never
+	 * be signalled normally since the standard defined field
+	 * is only 4 bits */
+	SAS_LINK_RATE_FAILED = 0x10,
+	SAS_PHY_VIRTUAL = 0x11,
+};
+
+struct sas_identify {
+	enum sas_device_type	device_type;
+	enum sas_protocol	initiator_port_protocols;
+	enum sas_protocol	target_port_protocols;
+	u64			sas_address;
+	u8			phy_identifier;
+};
+
+struct sas_phy {
+	struct device		dev;
+	int			number;
+	int			enabled;
+
+	/* phy identification */
+	struct sas_identify	identify;
+
+	/* phy attributes */
+	enum sas_linkrate	negotiated_linkrate;
+	enum sas_linkrate	minimum_linkrate_hw;
+	enum sas_linkrate	minimum_linkrate;
+	enum sas_linkrate	maximum_linkrate_hw;
+	enum sas_linkrate	maximum_linkrate;
+
+	/* link error statistics */
+	u32			invalid_dword_count;
+	u32			running_disparity_error_count;
+	u32			loss_of_dword_sync_count;
+	u32			phy_reset_problem_count;
+
+	/* for the list of phys belonging to a port */
+	struct list_head	port_siblings;
+
+	/* available to the lldd */
+	void			*hostdata;
+};
+
+#define dev_to_phy(d) \
+	container_of((d), struct sas_phy, dev)
+#define transport_class_to_phy(dev) \
+	dev_to_phy((dev)->parent)
+#define phy_to_shost(phy) \
+	dev_to_shost((phy)->dev.parent)
+
+struct request_queue;
+struct sas_rphy {
+	struct device		dev;
+	struct sas_identify	identify;
+	struct list_head	list;
+	struct request_queue	*q;
+	u32			scsi_target_id;
+};
+
+#define dev_to_rphy(d) \
+	container_of((d), struct sas_rphy, dev)
+#define transport_class_to_rphy(dev) \
+	dev_to_rphy((dev)->parent)
+#define rphy_to_shost(rphy) \
+	dev_to_shost((rphy)->dev.parent)
+#define target_to_rphy(targ) \
+	dev_to_rphy((targ)->dev.parent)
+
+struct sas_end_device {
+	struct sas_rphy		rphy;
+	/* flags */
+	unsigned		ready_led_meaning:1;
+	unsigned		tlr_supported:1;
+	unsigned		tlr_enabled:1;
+	/* parameters */
+	u16			I_T_nexus_loss_timeout;
+	u16			initiator_response_timeout;
+};
+#define rphy_to_end_device(r) \
+	container_of((r), struct sas_end_device, rphy)
+
+struct sas_expander_device {
+	int    level;
+	int    next_port_id;
+
+	#define SAS_EXPANDER_VENDOR_ID_LEN	8
+	char   vendor_id[SAS_EXPANDER_VENDOR_ID_LEN+1];
+	#define SAS_EXPANDER_PRODUCT_ID_LEN	16
+	char   product_id[SAS_EXPANDER_PRODUCT_ID_LEN+1];
+	#define SAS_EXPANDER_PRODUCT_REV_LEN	4
+	char   product_rev[SAS_EXPANDER_PRODUCT_REV_LEN+1];
+	#define SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN	8
+	char   component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN+1];
+	u16    component_id;
+	u8     component_revision_id;
+
+	struct sas_rphy		rphy;
+
+};
+#define rphy_to_expander_device(r) \
+	container_of((r), struct sas_expander_device, rphy)
+
+struct sas_port {
+	struct device		dev;
+
+	int			port_identifier;
+	int			num_phys;
+	/* port flags */
+	unsigned int		is_backlink:1;
+
+	/* the other end of the link */
+	struct sas_rphy		*rphy;
+
+	struct mutex		phy_list_mutex;
+	struct list_head	phy_list;
+};
+
+#define dev_to_sas_port(d) \
+	container_of((d), struct sas_port, dev)
+#define transport_class_to_sas_port(dev) \
+	dev_to_sas_port((dev)->parent)
+
+struct sas_phy_linkrates {
+	enum sas_linkrate maximum_linkrate;
+	enum sas_linkrate minimum_linkrate;
+};
+
+/* The functions by which the transport class and the driver communicate */
+struct sas_function_template {
+	int (*get_linkerrors)(struct sas_phy *);
+	int (*get_enclosure_identifier)(struct sas_rphy *, u64 *);
+	int (*get_bay_identifier)(struct sas_rphy *);
+	int (*phy_reset)(struct sas_phy *, int);
+	int (*phy_enable)(struct sas_phy *, int);
+	int (*phy_setup)(struct sas_phy *);
+	void (*phy_release)(struct sas_phy *);
+	int (*set_phy_speed)(struct sas_phy *, struct sas_phy_linkrates *);
+	int (*smp_handler)(struct Scsi_Host *, struct sas_rphy *, struct request *);
+};
+
+
+void sas_remove_children(struct device *);
+extern void sas_remove_host(struct Scsi_Host *);
+
+extern struct sas_phy *sas_phy_alloc(struct device *, int);
+extern void sas_phy_free(struct sas_phy *);
+extern int sas_phy_add(struct sas_phy *);
+extern void sas_phy_delete(struct sas_phy *);
+extern int scsi_is_sas_phy(const struct device *);
+
+unsigned int sas_tlr_supported(struct scsi_device *);
+unsigned int sas_is_tlr_enabled(struct scsi_device *);
+void sas_disable_tlr(struct scsi_device *);
+void sas_enable_tlr(struct scsi_device *);
+
+extern struct sas_rphy *sas_end_device_alloc(struct sas_port *);
+extern struct sas_rphy *sas_expander_alloc(struct sas_port *, enum sas_device_type);
+void sas_rphy_free(struct sas_rphy *);
+extern int sas_rphy_add(struct sas_rphy *);
+extern void sas_rphy_remove(struct sas_rphy *);
+extern void sas_rphy_delete(struct sas_rphy *);
+extern void sas_rphy_unlink(struct sas_rphy *);
+extern int scsi_is_sas_rphy(const struct device *);
+
+struct sas_port *sas_port_alloc(struct device *, int);
+struct sas_port *sas_port_alloc_num(struct device *);
+int sas_port_add(struct sas_port *);
+void sas_port_free(struct sas_port *);
+void sas_port_delete(struct sas_port *);
+void sas_port_add_phy(struct sas_port *, struct sas_phy *);
+void sas_port_delete_phy(struct sas_port *, struct sas_phy *);
+void sas_port_mark_backlink(struct sas_port *);
+int scsi_is_sas_port(const struct device *);
+struct sas_phy *sas_port_get_phy(struct sas_port *port);
+static inline void sas_port_put_phy(struct sas_phy *phy)
+{
+	if (phy)
+		put_device(&phy->dev);
+}
+
+extern struct scsi_transport_template *
+sas_attach_transport(struct sas_function_template *);
+extern void sas_release_transport(struct scsi_transport_template *);
+int sas_read_port_mode_page(struct scsi_device *);
+
+static inline int
+scsi_is_sas_expander_device(struct device *dev)
+{
+	struct sas_rphy *rphy;
+	if (!scsi_is_sas_rphy(dev))
+		return 0;
+	rphy = dev_to_rphy(dev);
+	return rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE ||
+		rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE;
+}
+
+#define scsi_is_sas_phy_local(phy)	scsi_is_host_device((phy)->dev.parent)
+
+#endif /* SCSI_TRANSPORT_SAS_H */
diff --git a/include/scsi/scsi_transport_spi.h b/include/scsi/scsi_transport_spi.h
new file mode 100644
index 00000000..7497a383
--- /dev/null
+++ b/include/scsi/scsi_transport_spi.h
@@ -0,0 +1,161 @@
+/* 
+ *  Parallel SCSI (SPI) transport specific attributes exported to sysfs.
+ *
+ *  Copyright (c) 2003 Silicon Graphics, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef SCSI_TRANSPORT_SPI_H
+#define SCSI_TRANSPORT_SPI_H
+
+#include <linux/transport_class.h>
+#include <linux/mutex.h>
+
+struct scsi_transport_template;
+struct scsi_target;
+struct scsi_device;
+struct Scsi_Host;
+
+struct spi_transport_attrs {
+	int period;		/* value in the PPR/SDTR command */
+	int min_period;
+	int offset;
+	int max_offset;
+	unsigned int width:1;	/* 0 - narrow, 1 - wide */
+	unsigned int max_width:1;
+	unsigned int iu:1;	/* Information Units enabled */
+	unsigned int max_iu:1;
+	unsigned int dt:1;	/* DT clocking enabled */
+	unsigned int qas:1;	/* Quick Arbitration and Selection enabled */
+	unsigned int max_qas:1;
+	unsigned int wr_flow:1;	/* Write Flow control enabled */
+	unsigned int rd_strm:1;	/* Read streaming enabled */
+	unsigned int rti:1;	/* Retain Training Information */
+	unsigned int pcomp_en:1;/* Precompensation enabled */
+	unsigned int hold_mcs:1;/* Hold Margin Control Settings */
+	unsigned int initial_dv:1; /* DV done to this target yet  */
+	unsigned long flags;	/* flags field for drivers to use */
+	/* Device Properties fields */
+	unsigned int support_sync:1; /* synchronous support */
+	unsigned int support_wide:1; /* wide support */
+	unsigned int support_dt:1; /* allows DT phases */
+	unsigned int support_dt_only; /* disallows ST phases */
+	unsigned int support_ius; /* support Information Units */
+	unsigned int support_qas; /* supports quick arbitration and selection */
+	/* Private Fields */
+	unsigned int dv_pending:1; /* Internal flag: DV Requested */
+	unsigned int dv_in_progress:1;	/* Internal: DV started */
+	struct mutex dv_mutex; /* semaphore to serialise dv */
+};
+
+enum spi_signal_type {
+	SPI_SIGNAL_UNKNOWN = 1,
+	SPI_SIGNAL_SE,
+	SPI_SIGNAL_LVD,
+	SPI_SIGNAL_HVD,
+};
+
+struct spi_host_attrs {
+	enum spi_signal_type signalling;
+};
+
+/* accessor functions */
+#define spi_period(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->period)
+#define spi_min_period(x) (((struct spi_transport_attrs *)&(x)->starget_data)->min_period)
+#define spi_offset(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->offset)
+#define spi_max_offset(x) (((struct spi_transport_attrs *)&(x)->starget_data)->max_offset)
+#define spi_width(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->width)
+#define spi_max_width(x) (((struct spi_transport_attrs *)&(x)->starget_data)->max_width)
+#define spi_iu(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->iu)
+#define spi_max_iu(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->max_iu)
+#define spi_dt(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->dt)
+#define spi_qas(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->qas)
+#define spi_max_qas(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->max_qas)
+#define spi_wr_flow(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->wr_flow)
+#define spi_rd_strm(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->rd_strm)
+#define spi_rti(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->rti)
+#define spi_pcomp_en(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->pcomp_en)
+#define spi_hold_mcs(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->hold_mcs)
+#define spi_initial_dv(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->initial_dv)
+#define spi_dv_pending(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_pending)
+
+#define spi_support_sync(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->support_sync)
+#define spi_support_wide(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->support_wide)
+#define spi_support_dt(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->support_dt)
+#define spi_support_dt_only(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->support_dt_only)
+#define spi_support_ius(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->support_ius)
+#define spi_support_qas(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->support_qas)
+
+#define spi_flags(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->flags)
+#define spi_signalling(h)	(((struct spi_host_attrs *)(h)->shost_data)->signalling)
+
+
+
+/* The functions by which the transport class and the driver communicate */
+struct spi_function_template {
+	void	(*get_period)(struct scsi_target *);
+	void	(*set_period)(struct scsi_target *, int);
+	void	(*get_offset)(struct scsi_target *);
+	void	(*set_offset)(struct scsi_target *, int);
+	void	(*get_width)(struct scsi_target *);
+	void	(*set_width)(struct scsi_target *, int);
+	void	(*get_iu)(struct scsi_target *);
+	void	(*set_iu)(struct scsi_target *, int);
+	void	(*get_dt)(struct scsi_target *);
+	void	(*set_dt)(struct scsi_target *, int);
+	void	(*get_qas)(struct scsi_target *);
+	void	(*set_qas)(struct scsi_target *, int);
+	void	(*get_wr_flow)(struct scsi_target *);
+	void	(*set_wr_flow)(struct scsi_target *, int);
+	void	(*get_rd_strm)(struct scsi_target *);
+	void	(*set_rd_strm)(struct scsi_target *, int);
+	void	(*get_rti)(struct scsi_target *);
+	void	(*set_rti)(struct scsi_target *, int);
+	void	(*get_pcomp_en)(struct scsi_target *);
+	void	(*set_pcomp_en)(struct scsi_target *, int);
+	void	(*get_hold_mcs)(struct scsi_target *);
+	void	(*set_hold_mcs)(struct scsi_target *, int);
+	void	(*get_signalling)(struct Scsi_Host *);
+	void	(*set_signalling)(struct Scsi_Host *, enum spi_signal_type);
+	int	(*deny_binding)(struct scsi_target *);
+	/* The driver sets these to tell the transport class it
+	 * wants the attributes displayed in sysfs.  If the show_ flag
+	 * is not set, the attribute will be private to the transport
+	 * class */
+	unsigned long	show_period:1;
+	unsigned long	show_offset:1;
+	unsigned long	show_width:1;
+	unsigned long	show_iu:1;
+	unsigned long	show_dt:1;
+	unsigned long	show_qas:1;
+	unsigned long	show_wr_flow:1;
+	unsigned long	show_rd_strm:1;
+	unsigned long	show_rti:1;
+	unsigned long	show_pcomp_en:1;
+	unsigned long	show_hold_mcs:1;
+};
+
+struct scsi_transport_template *spi_attach_transport(struct spi_function_template *);
+void spi_release_transport(struct scsi_transport_template *);
+void spi_schedule_dv_device(struct scsi_device *);
+void spi_dv_device(struct scsi_device *);
+void spi_display_xfer_agreement(struct scsi_target *);
+int spi_print_msg(const unsigned char *);
+int spi_populate_width_msg(unsigned char *msg, int width);
+int spi_populate_sync_msg(unsigned char *msg, int period, int offset);
+int spi_populate_ppr_msg(unsigned char *msg, int period, int offset, int width,
+		int options);
+
+#endif /* SCSI_TRANSPORT_SPI_H */
diff --git a/include/scsi/scsi_transport_srp.h b/include/scsi/scsi_transport_srp.h
new file mode 100644
index 00000000..9c60ca1c
--- /dev/null
+++ b/include/scsi/scsi_transport_srp.h
@@ -0,0 +1,39 @@
+#ifndef SCSI_TRANSPORT_SRP_H
+#define SCSI_TRANSPORT_SRP_H
+
+#include <linux/transport_class.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+
+#define SRP_RPORT_ROLE_INITIATOR 0
+#define SRP_RPORT_ROLE_TARGET 1
+
+struct srp_rport_identifiers {
+	u8 port_id[16];
+	u8 roles;
+};
+
+struct srp_rport {
+	struct device dev;
+
+	u8 port_id[16];
+	u8 roles;
+};
+
+struct srp_function_template {
+	/* for target drivers */
+	int (* tsk_mgmt_response)(struct Scsi_Host *, u64, u64, int);
+	int (* it_nexus_response)(struct Scsi_Host *, u64, int);
+};
+
+extern struct scsi_transport_template *
+srp_attach_transport(struct srp_function_template *);
+extern void srp_release_transport(struct scsi_transport_template *);
+
+extern struct srp_rport *srp_rport_add(struct Scsi_Host *,
+				       struct srp_rport_identifiers *);
+extern void srp_rport_del(struct srp_rport *);
+
+extern void srp_remove_host(struct Scsi_Host *);
+
+#endif
diff --git a/include/scsi/scsicam.h b/include/scsi/scsicam.h
new file mode 100644
index 00000000..24ede474
--- /dev/null
+++ b/include/scsi/scsicam.h
@@ -0,0 +1,19 @@
+/*
+ * scsicam.h - SCSI CAM support functions, use for HDIO_GETGEO, etc.
+ *
+ * Copyright 1993, 1994 Drew Eckhardt
+ *      Visionary Computing 
+ *      (Unix and Linux consulting and custom programming)
+ *      drew@Colorado.EDU
+ *	+1 (303) 786-7975
+ *
+ * For more information, please consult the SCSI-CAM draft.
+ */
+
+#ifndef SCSICAM_H
+#define SCSICAM_H
+extern int scsicam_bios_param (struct block_device *bdev, sector_t capacity, int *ip);
+extern int scsi_partsize(unsigned char *buf, unsigned long capacity,
+           unsigned int  *cyls, unsigned int *hds, unsigned int *secs);
+extern unsigned char *scsi_bios_ptable(struct block_device *bdev);
+#endif /* def SCSICAM_H */
diff --git a/include/scsi/sg.h b/include/scsi/sg.h
new file mode 100644
index 00000000..a9f3c6fc
--- /dev/null
+++ b/include/scsi/sg.h
@@ -0,0 +1,311 @@
+#ifndef _SCSI_GENERIC_H
+#define _SCSI_GENERIC_H
+
+#include <linux/compiler.h>
+
+/*
+   History:
+    Started: Aug 9 by Lawrence Foard (entropy@world.std.com), to allow user
+     process control of SCSI devices.
+    Development Sponsored by Killy Corp. NY NY
+Original driver (sg.h):
+*       Copyright (C) 1992 Lawrence Foard
+Version 2 and 3 extensions to driver:
+*       Copyright (C) 1998 - 2006 Douglas Gilbert
+
+    Version: 3.5.34 (20060920)
+    This version is for 2.6 series kernels.
+
+    For a full changelog see http://www.torque.net/sg
+
+Map of SG verions to the Linux kernels in which they appear:
+       ----------        ----------------------------------
+       original          all kernels < 2.2.6
+       2.1.40            2.2.20
+       3.0.x             optional version 3 sg driver for 2.2 series
+       3.1.17++          2.4.0++
+       3.5.30++          2.6.0++
+
+Major new features in SG 3.x driver (cf SG 2.x drivers)
+	- SG_IO ioctl() combines function if write() and read()
+	- new interface (sg_io_hdr_t) but still supports old interface
+	- scatter/gather in user space, direct IO, and mmap supported
+
+ The normal action of this driver is to use the adapter (HBA) driver to DMA
+ data into kernel buffers and then use the CPU to copy the data into the 
+ user space (vice versa for writes). That is called "indirect" IO due to 
+ the double handling of data. There are two methods offered to remove the
+ redundant copy: 1) direct IO and 2) using the mmap() system call to map
+ the reserve buffer (this driver has one reserve buffer per fd) into the
+ user space. Both have their advantages.
+ In terms of absolute speed mmap() is faster. If speed is not a concern, 
+ indirect IO should be fine. Read the documentation for more information.
+
+ ** N.B. To use direct IO 'echo 1 > /proc/scsi/sg/allow_dio' or
+         'echo 1 > /sys/module/sg/parameters/allow_dio' is needed.
+         That attribute is 0 by default. **
+ 
+ Historical note: this SCSI pass-through driver has been known as "sg" for 
+ a decade. In broader kernel discussions "sg" is used to refer to scatter
+ gather techniques. The context should clarify which "sg" is referred to.
+
+ Documentation
+ =============
+ A web site for the SG device driver can be found at:
+	http://www.torque.net/sg  [alternatively check the MAINTAINERS file]
+ The documentation for the sg version 3 driver can be found at:
+ 	http://www.torque.net/sg/p/sg_v3_ho.html
+ This is a rendering from DocBook source [change the extension to "sgml"
+ or "xml"]. There are renderings in "ps", "pdf", "rtf" and "txt" (soon).
+ The SG_IO ioctl is now found in other parts kernel (e.g. the block layer).
+ For more information see http://www.torque.net/sg/sg_io.html
+
+ The older, version 2 documents discuss the original sg interface in detail:
+	http://www.torque.net/sg/p/scsi-generic.txt
+	http://www.torque.net/sg/p/scsi-generic_long.txt
+ Also available: <kernel_source>/Documentation/scsi/scsi-generic.txt
+
+ Utility and test programs are available at the sg web site. They are 
+ packaged as sg3_utils (for the lk 2.4 and 2.6 series) and sg_utils
+ (for the lk 2.2 series).
+*/
+
+#ifdef __KERNEL__
+extern int sg_big_buff; /* for sysctl */
+#endif
+
+/* New interface introduced in the 3.x SG drivers follows */
+
+typedef struct sg_iovec /* same structure as used by readv() Linux system */
+{                       /* call. It defines one scatter-gather element. */
+    void __user *iov_base;      /* Starting address  */
+    size_t iov_len;             /* Length in bytes  */
+} sg_iovec_t;
+
+
+typedef struct sg_io_hdr
+{
+    int interface_id;           /* [i] 'S' for SCSI generic (required) */
+    int dxfer_direction;        /* [i] data transfer direction  */
+    unsigned char cmd_len;      /* [i] SCSI command length ( <= 16 bytes) */
+    unsigned char mx_sb_len;    /* [i] max length to write to sbp */
+    unsigned short iovec_count; /* [i] 0 implies no scatter gather */
+    unsigned int dxfer_len;     /* [i] byte count of data transfer */
+    void __user *dxferp;	/* [i], [*io] points to data transfer memory
+					      or scatter gather list */
+    unsigned char __user *cmdp; /* [i], [*i] points to command to perform */
+    void __user *sbp;		/* [i], [*o] points to sense_buffer memory */
+    unsigned int timeout;       /* [i] MAX_UINT->no timeout (unit: millisec) */
+    unsigned int flags;         /* [i] 0 -> default, see SG_FLAG... */
+    int pack_id;                /* [i->o] unused internally (normally) */
+    void __user * usr_ptr;      /* [i->o] unused internally */
+    unsigned char status;       /* [o] scsi status */
+    unsigned char masked_status;/* [o] shifted, masked scsi status */
+    unsigned char msg_status;   /* [o] messaging level data (optional) */
+    unsigned char sb_len_wr;    /* [o] byte count actually written to sbp */
+    unsigned short host_status; /* [o] errors from host adapter */
+    unsigned short driver_status;/* [o] errors from software driver */
+    int resid;                  /* [o] dxfer_len - actual_transferred */
+    unsigned int duration;      /* [o] time taken by cmd (unit: millisec) */
+    unsigned int info;          /* [o] auxiliary information */
+} sg_io_hdr_t;  /* 64 bytes long (on i386) */
+
+#define SG_INTERFACE_ID_ORIG 'S'
+
+/* Use negative values to flag difference from original sg_header structure */
+#define SG_DXFER_NONE (-1)      /* e.g. a SCSI Test Unit Ready command */
+#define SG_DXFER_TO_DEV (-2)    /* e.g. a SCSI WRITE command */
+#define SG_DXFER_FROM_DEV (-3)  /* e.g. a SCSI READ command */
+#define SG_DXFER_TO_FROM_DEV (-4) /* treated like SG_DXFER_FROM_DEV with the
+				   additional property than during indirect
+				   IO the user buffer is copied into the
+				   kernel buffers before the transfer */
+#define SG_DXFER_UNKNOWN (-5)   /* Unknown data direction */
+
+/* following flag values can be "or"-ed together */
+#define SG_FLAG_DIRECT_IO 1     /* default is indirect IO */
+#define SG_FLAG_UNUSED_LUN_INHIBIT 2   /* default is overwrite lun in SCSI */
+				/* command block (when <= SCSI_2) */
+#define SG_FLAG_MMAP_IO 4       /* request memory mapped IO */
+#define SG_FLAG_NO_DXFER 0x10000 /* no transfer of kernel buffers to/from */
+				/* user space (debug indirect IO) */
+
+/* following 'info' values are "or"-ed together */
+#define SG_INFO_OK_MASK 0x1
+#define SG_INFO_OK 0x0          /* no sense, host nor driver "noise" */
+#define SG_INFO_CHECK 0x1       /* something abnormal happened */
+
+#define SG_INFO_DIRECT_IO_MASK 0x6
+#define SG_INFO_INDIRECT_IO 0x0 /* data xfer via kernel buffers (or no xfer) */
+#define SG_INFO_DIRECT_IO 0x2   /* direct IO requested and performed */
+#define SG_INFO_MIXED_IO 0x4    /* part direct, part indirect IO */
+
+
+typedef struct sg_scsi_id { /* used by SG_GET_SCSI_ID ioctl() */
+    int host_no;        /* as in "scsi<n>" where 'n' is one of 0, 1, 2 etc */
+    int channel;
+    int scsi_id;        /* scsi id of target device */
+    int lun;
+    int scsi_type;      /* TYPE_... defined in scsi/scsi.h */
+    short h_cmd_per_lun;/* host (adapter) maximum commands per lun */
+    short d_queue_depth;/* device (or adapter) maximum queue length */
+    int unused[2];      /* probably find a good use, set 0 for now */
+} sg_scsi_id_t; /* 32 bytes long on i386 */
+
+typedef struct sg_req_info { /* used by SG_GET_REQUEST_TABLE ioctl() */
+    char req_state;     /* 0 -> not used, 1 -> written, 2 -> ready to read */
+    char orphan;        /* 0 -> normal request, 1 -> from interruped SG_IO */
+    char sg_io_owned;   /* 0 -> complete with read(), 1 -> owned by SG_IO */
+    char problem;       /* 0 -> no problem detected, 1 -> error to report */
+    int pack_id;        /* pack_id associated with request */
+    void __user *usr_ptr;     /* user provided pointer (in new interface) */
+    unsigned int duration; /* millisecs elapsed since written (req_state==1)
+			      or request duration (req_state==2) */
+    int unused;
+} sg_req_info_t; /* 20 bytes long on i386 */
+
+
+/* IOCTLs: Those ioctls that are relevant to the SG 3.x drivers follow.
+ [Those that only apply to the SG 2.x drivers are at the end of the file.]
+ (_GET_s yield result via 'int *' 3rd argument unless otherwise indicated) */
+
+#define SG_EMULATED_HOST 0x2203 /* true for emulated host adapter (ATAPI) */
+
+/* Used to configure SCSI command transformation layer for ATAPI devices */
+/* Only supported by the ide-scsi driver */
+#define SG_SET_TRANSFORM 0x2204 /* N.B. 3rd arg is not pointer but value: */
+		      /* 3rd arg = 0 to disable transform, 1 to enable it */
+#define SG_GET_TRANSFORM 0x2205
+
+#define SG_SET_RESERVED_SIZE 0x2275  /* request a new reserved buffer size */
+#define SG_GET_RESERVED_SIZE 0x2272  /* actual size of reserved buffer */
+
+/* The following ioctl has a 'sg_scsi_id_t *' object as its 3rd argument. */
+#define SG_GET_SCSI_ID 0x2276   /* Yields fd's bus, chan, dev, lun + type */
+/* SCSI id information can also be obtained from SCSI_IOCTL_GET_IDLUN */
+
+/* Override host setting and always DMA using low memory ( <16MB on i386) */
+#define SG_SET_FORCE_LOW_DMA 0x2279  /* 0-> use adapter setting, 1-> force */
+#define SG_GET_LOW_DMA 0x227a   /* 0-> use all ram for dma; 1-> low dma ram */
+
+/* When SG_SET_FORCE_PACK_ID set to 1, pack_id is input to read() which
+   tries to fetch a packet with a matching pack_id, waits, or returns EAGAIN.
+   If pack_id is -1 then read oldest waiting. When ...FORCE_PACK_ID set to 0
+   then pack_id ignored by read() and oldest readable fetched. */
+#define SG_SET_FORCE_PACK_ID 0x227b
+#define SG_GET_PACK_ID 0x227c /* Yields oldest readable pack_id (or -1) */
+
+#define SG_GET_NUM_WAITING 0x227d /* Number of commands awaiting read() */
+
+/* Yields max scatter gather tablesize allowed by current host adapter */
+#define SG_GET_SG_TABLESIZE 0x227F  /* 0 implies can't do scatter gather */
+
+#define SG_GET_VERSION_NUM 0x2282 /* Example: version 2.1.34 yields 20134 */
+
+/* Returns -EBUSY if occupied. 3rd argument pointer to int (see next) */
+#define SG_SCSI_RESET 0x2284
+/* Associated values that can be given to SG_SCSI_RESET follow */
+#define		SG_SCSI_RESET_NOTHING	0
+#define		SG_SCSI_RESET_DEVICE	1
+#define		SG_SCSI_RESET_BUS	2
+#define		SG_SCSI_RESET_HOST	3
+#define		SG_SCSI_RESET_TARGET	4
+
+/* synchronous SCSI command ioctl, (only in version 3 interface) */
+#define SG_IO 0x2285   /* similar effect as write() followed by read() */
+
+#define SG_GET_REQUEST_TABLE 0x2286   /* yields table of active requests */
+
+/* How to treat EINTR during SG_IO ioctl(), only in SG 3.x series */
+#define SG_SET_KEEP_ORPHAN 0x2287 /* 1 -> hold for read(), 0 -> drop (def) */
+#define SG_GET_KEEP_ORPHAN 0x2288
+
+/* yields scsi midlevel's access_count for this SCSI device */
+#define SG_GET_ACCESS_COUNT 0x2289  
+
+
+#define SG_SCATTER_SZ (8 * 4096)
+/* Largest size (in bytes) a single scatter-gather list element can have.
+   The value used by the driver is 'max(SG_SCATTER_SZ, PAGE_SIZE)'.
+   This value should be a power of 2 (and may be rounded up internally).
+   If scatter-gather is not supported by adapter then this value is the
+   largest data block that can be read/written by a single scsi command. */
+
+#define SG_DEFAULT_RETRIES 0
+
+/* Defaults, commented if they differ from original sg driver */
+#define SG_DEF_FORCE_LOW_DMA 0  /* was 1 -> memory below 16MB on i386 */
+#define SG_DEF_FORCE_PACK_ID 0
+#define SG_DEF_KEEP_ORPHAN 0
+#define SG_DEF_RESERVED_SIZE SG_SCATTER_SZ /* load time option */
+
+/* maximum outstanding requests, write() yields EDOM if exceeded */
+#define SG_MAX_QUEUE 16
+
+#define SG_BIG_BUFF SG_DEF_RESERVED_SIZE    /* for backward compatibility */
+
+/* Alternate style type names, "..._t" variants preferred */
+typedef struct sg_io_hdr Sg_io_hdr;
+typedef struct sg_io_vec Sg_io_vec;
+typedef struct sg_scsi_id Sg_scsi_id;
+typedef struct sg_req_info Sg_req_info;
+
+
+/* vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv */
+/*   The older SG interface based on the 'sg_header' structure follows.   */
+/* ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ */
+
+#define SG_MAX_SENSE 16   /* this only applies to the sg_header interface */
+
+struct sg_header
+{
+    int pack_len;    /* [o] reply_len (ie useless), ignored as input */
+    int reply_len;   /* [i] max length of expected reply (inc. sg_header) */
+    int pack_id;     /* [io] id number of packet (use ints >= 0) */
+    int result;      /* [o] 0==ok, else (+ve) Unix errno (best ignored) */
+    unsigned int twelve_byte:1;
+	/* [i] Force 12 byte command length for group 6 & 7 commands  */
+    unsigned int target_status:5;   /* [o] scsi status from target */
+    unsigned int host_status:8;     /* [o] host status (see "DID" codes) */
+    unsigned int driver_status:8;   /* [o] driver status+suggestion */
+    unsigned int other_flags:10;    /* unused */
+    unsigned char sense_buffer[SG_MAX_SENSE]; /* [o] Output in 3 cases:
+	   when target_status is CHECK_CONDITION or
+	   when target_status is COMMAND_TERMINATED or
+	   when (driver_status & DRIVER_SENSE) is true. */
+};      /* This structure is 36 bytes long on i386 */
+
+
+/* IOCTLs: The following are not required (or ignored) when the sg_io_hdr_t
+	   interface is used. They are kept for backward compatibility with
+	   the original and version 2 drivers. */
+
+#define SG_SET_TIMEOUT 0x2201  /* unit: jiffies (10ms on i386) */
+#define SG_GET_TIMEOUT 0x2202  /* yield timeout as _return_ value */
+
+/* Get/set command queuing state per fd (default is SG_DEF_COMMAND_Q.
+   Each time a sg_io_hdr_t object is seen on this file descriptor, this
+   command queuing flag is set on (overriding the previous setting). */
+#define SG_GET_COMMAND_Q 0x2270   /* Yields 0 (queuing off) or 1 (on) */
+#define SG_SET_COMMAND_Q 0x2271   /* Change queuing state with 0 or 1 */
+
+/* Turn on/off error sense trace (1 and 0 respectively, default is off).
+   Try using: "# cat /proc/scsi/sg/debug" instead in the v3 driver */
+#define SG_SET_DEBUG 0x227e    /* 0 -> turn off debug */
+
+#define SG_NEXT_CMD_LEN 0x2283  /* override SCSI command length with given
+		   number on the next write() on this file descriptor */
+
+
+/* Defaults, commented if they differ from original sg driver */
+#ifdef __KERNEL__
+#define SG_DEFAULT_TIMEOUT_USER	(60*USER_HZ) /* HZ == 'jiffies in 1 second' */
+#else
+#define SG_DEFAULT_TIMEOUT	(60*HZ)	     /* HZ == 'jiffies in 1 second' */
+#endif
+
+#define SG_DEF_COMMAND_Q 0     /* command queuing is always on when
+				  the new interface is used */
+#define SG_DEF_UNDERRUN_FLAG 0
+
+#endif
diff --git a/include/scsi/srp.h b/include/scsi/srp.h
new file mode 100644
index 00000000..1ae84db4
--- /dev/null
+++ b/include/scsi/srp.h
@@ -0,0 +1,280 @@
+/*
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * $Id$
+ */
+
+#ifndef SCSI_SRP_H
+#define SCSI_SRP_H
+
+/*
+ * Structures and constants for the SCSI RDMA Protocol (SRP) as
+ * defined by the INCITS T10 committee.  This file was written using
+ * draft Revision 16a of the SRP standard.
+ */
+
+#include <linux/types.h>
+
+enum {
+	SRP_LOGIN_REQ	= 0x00,
+	SRP_TSK_MGMT	= 0x01,
+	SRP_CMD		= 0x02,
+	SRP_I_LOGOUT	= 0x03,
+	SRP_LOGIN_RSP	= 0xc0,
+	SRP_RSP		= 0xc1,
+	SRP_LOGIN_REJ	= 0xc2,
+	SRP_T_LOGOUT	= 0x80,
+	SRP_CRED_REQ	= 0x81,
+	SRP_AER_REQ	= 0x82,
+	SRP_CRED_RSP	= 0x41,
+	SRP_AER_RSP	= 0x42
+};
+
+enum {
+	SRP_BUF_FORMAT_DIRECT	= 1 << 1,
+	SRP_BUF_FORMAT_INDIRECT	= 1 << 2
+};
+
+enum {
+	SRP_NO_DATA_DESC	= 0,
+	SRP_DATA_DESC_DIRECT	= 1,
+	SRP_DATA_DESC_INDIRECT	= 2
+};
+
+enum {
+	SRP_TSK_ABORT_TASK	= 0x01,
+	SRP_TSK_ABORT_TASK_SET	= 0x02,
+	SRP_TSK_CLEAR_TASK_SET	= 0x04,
+	SRP_TSK_LUN_RESET	= 0x08,
+	SRP_TSK_CLEAR_ACA	= 0x40
+};
+
+enum srp_login_rej_reason {
+	SRP_LOGIN_REJ_UNABLE_ESTABLISH_CHANNEL		= 0x00010000,
+	SRP_LOGIN_REJ_INSUFFICIENT_RESOURCES		= 0x00010001,
+	SRP_LOGIN_REJ_REQ_IT_IU_LENGTH_TOO_LARGE	= 0x00010002,
+	SRP_LOGIN_REJ_UNABLE_ASSOCIATE_CHANNEL		= 0x00010003,
+	SRP_LOGIN_REJ_UNSUPPORTED_DESCRIPTOR_FMT	= 0x00010004,
+	SRP_LOGIN_REJ_MULTI_CHANNEL_UNSUPPORTED		= 0x00010005,
+	SRP_LOGIN_REJ_CHANNEL_LIMIT_REACHED		= 0x00010006
+};
+
+enum {
+	SRP_REV10_IB_IO_CLASS	= 0xff00,
+	SRP_REV16A_IB_IO_CLASS	= 0x0100
+};
+
+struct srp_direct_buf {
+	__be64	va;
+	__be32	key;
+	__be32  len;
+};
+
+/*
+ * We need the packed attribute because the SRP spec puts the list of
+ * descriptors at an offset of 20, which is not aligned to the size of
+ * struct srp_direct_buf.  The whole structure must be packed to avoid
+ * having the 20-byte structure padded to 24 bytes on 64-bit architectures.
+ */
+struct srp_indirect_buf {
+	struct srp_direct_buf	table_desc;
+	__be32			len;
+	struct srp_direct_buf	desc_list[0];
+} __attribute__((packed));
+
+enum {
+	SRP_MULTICHAN_SINGLE = 0,
+	SRP_MULTICHAN_MULTI  = 1
+};
+
+struct srp_login_req {
+	u8	opcode;
+	u8	reserved1[7];
+	u64	tag;
+	__be32	req_it_iu_len;
+	u8	reserved2[4];
+	__be16	req_buf_fmt;
+	u8	req_flags;
+	u8	reserved3[5];
+	u8	initiator_port_id[16];
+	u8	target_port_id[16];
+};
+
+/*
+ * The SRP spec defines the size of the LOGIN_RSP structure to be 52
+ * bytes, so it needs to be packed to avoid having it padded to 56
+ * bytes on 64-bit architectures.
+ */
+struct srp_login_rsp {
+	u8	opcode;
+	u8	reserved1[3];
+	__be32	req_lim_delta;
+	u64	tag;
+	__be32	max_it_iu_len;
+	__be32	max_ti_iu_len;
+	__be16	buf_fmt;
+	u8	rsp_flags;
+	u8	reserved2[25];
+} __attribute__((packed));
+
+struct srp_login_rej {
+	u8	opcode;
+	u8	reserved1[3];
+	__be32	reason;
+	u64	tag;
+	u8	reserved2[8];
+	__be16	buf_fmt;
+	u8	reserved3[6];
+};
+
+struct srp_i_logout {
+	u8	opcode;
+	u8	reserved[7];
+	u64	tag;
+};
+
+struct srp_t_logout {
+	u8	opcode;
+	u8	sol_not;
+	u8	reserved[2];
+	__be32	reason;
+	u64	tag;
+};
+
+/*
+ * We need the packed attribute because the SRP spec only aligns the
+ * 8-byte LUN field to 4 bytes.
+ */
+struct srp_tsk_mgmt {
+	u8	opcode;
+	u8	sol_not;
+	u8	reserved1[6];
+	u64	tag;
+	u8	reserved2[4];
+	__be64	lun __attribute__((packed));
+	u8	reserved3[2];
+	u8	tsk_mgmt_func;
+	u8	reserved4;
+	u64	task_tag;
+	u8	reserved5[8];
+};
+
+/*
+ * We need the packed attribute because the SRP spec only aligns the
+ * 8-byte LUN field to 4 bytes.
+ */
+struct srp_cmd {
+	u8	opcode;
+	u8	sol_not;
+	u8	reserved1[3];
+	u8	buf_fmt;
+	u8	data_out_desc_cnt;
+	u8	data_in_desc_cnt;
+	u64	tag;
+	u8	reserved2[4];
+	__be64	lun __attribute__((packed));
+	u8	reserved3;
+	u8	task_attr;
+	u8	reserved4;
+	u8	add_cdb_len;
+	u8	cdb[16];
+	u8	add_data[0];
+};
+
+enum {
+	SRP_RSP_FLAG_RSPVALID = 1 << 0,
+	SRP_RSP_FLAG_SNSVALID = 1 << 1,
+	SRP_RSP_FLAG_DOOVER   = 1 << 2,
+	SRP_RSP_FLAG_DOUNDER  = 1 << 3,
+	SRP_RSP_FLAG_DIOVER   = 1 << 4,
+	SRP_RSP_FLAG_DIUNDER  = 1 << 5
+};
+
+/*
+ * The SRP spec defines the size of the RSP structure to be 36 bytes,
+ * so it needs to be packed to avoid having it padded to 40 bytes on
+ * 64-bit architectures.
+ */
+struct srp_rsp {
+	u8	opcode;
+	u8	sol_not;
+	u8	reserved1[2];
+	__be32	req_lim_delta;
+	u64	tag;
+	u8	reserved2[2];
+	u8	flags;
+	u8	status;
+	__be32	data_out_res_cnt;
+	__be32	data_in_res_cnt;
+	__be32	sense_data_len;
+	__be32	resp_data_len;
+	u8	data[0];
+} __attribute__((packed));
+
+struct srp_cred_req {
+	u8	opcode;
+	u8	sol_not;
+	u8	reserved[2];
+	__be32	req_lim_delta;
+	u64	tag;
+};
+
+struct srp_cred_rsp {
+	u8	opcode;
+	u8	reserved[7];
+	u64	tag;
+};
+
+/*
+ * The SRP spec defines the fixed portion of the AER_REQ structure to be
+ * 36 bytes, so it needs to be packed to avoid having it padded to 40 bytes
+ * on 64-bit architectures.
+ */
+struct srp_aer_req {
+	u8	opcode;
+	u8	sol_not;
+	u8	reserved[2];
+	__be32	req_lim_delta;
+	u64	tag;
+	u32	reserved2;
+	__be64	lun;
+	__be32	sense_data_len;
+	u32	reserved3;
+	u8	sense_data[0];
+} __attribute__((packed));
+
+struct srp_aer_rsp {
+	u8	opcode;
+	u8	reserved[7];
+	u64	tag;
+};
+
+#endif /* SCSI_SRP_H */
diff --git a/include/sound/Kbuild b/include/sound/Kbuild
new file mode 100644
index 00000000..6df30ed1
--- /dev/null
+++ b/include/sound/Kbuild
@@ -0,0 +1,10 @@
+header-y += asequencer.h
+header-y += asound.h
+header-y += asound_fm.h
+header-y += emu10k1.h
+header-y += hdsp.h
+header-y += hdspm.h
+header-y += sb16_csp.h
+header-y += sfnt_info.h
+header-y += compress_params.h
+header-y += compress_offload.h
diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h
new file mode 100644
index 00000000..02cbb502
--- /dev/null
+++ b/include/sound/ac97_codec.h
@@ -0,0 +1,659 @@
+#ifndef __SOUND_AC97_CODEC_H
+#define __SOUND_AC97_CODEC_H
+
+/*
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ *  Universal interface for Audio Codec '97
+ *
+ *  For more details look to AC '97 component specification revision 2.1
+ *  by Intel Corporation (http://developer.intel.com).
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/workqueue.h>
+#include "pcm.h"
+#include "control.h"
+#include "info.h"
+
+/* maximum number of devices on the AC97 bus */
+#define	AC97_BUS_MAX_DEVICES	4
+
+/*
+ *  AC'97 codec registers
+ */
+
+#define AC97_RESET		0x00	/* Reset */
+#define AC97_MASTER		0x02	/* Master Volume */
+#define AC97_HEADPHONE		0x04	/* Headphone Volume (optional) */
+#define AC97_MASTER_MONO	0x06	/* Master Volume Mono (optional) */
+#define AC97_MASTER_TONE	0x08	/* Master Tone (Bass & Treble) (optional) */
+#define AC97_PC_BEEP		0x0a	/* PC Beep Volume (optinal) */
+#define AC97_PHONE		0x0c	/* Phone Volume (optional) */
+#define AC97_MIC		0x0e	/* MIC Volume */
+#define AC97_LINE		0x10	/* Line In Volume */
+#define AC97_CD			0x12	/* CD Volume */
+#define AC97_VIDEO		0x14	/* Video Volume (optional) */
+#define AC97_AUX		0x16	/* AUX Volume (optional) */
+#define AC97_PCM		0x18	/* PCM Volume */
+#define AC97_REC_SEL		0x1a	/* Record Select */
+#define AC97_REC_GAIN		0x1c	/* Record Gain */
+#define AC97_REC_GAIN_MIC	0x1e	/* Record Gain MIC (optional) */
+#define AC97_GENERAL_PURPOSE	0x20	/* General Purpose (optional) */
+#define AC97_3D_CONTROL		0x22	/* 3D Control (optional) */
+#define AC97_INT_PAGING		0x24	/* Audio Interrupt & Paging (AC'97 2.3) */
+#define AC97_POWERDOWN		0x26	/* Powerdown control / status */
+/* range 0x28-0x3a - AUDIO AC'97 2.0 extensions */
+#define AC97_EXTENDED_ID	0x28	/* Extended Audio ID */
+#define AC97_EXTENDED_STATUS	0x2a	/* Extended Audio Status and Control */
+#define AC97_PCM_FRONT_DAC_RATE 0x2c	/* PCM Front DAC Rate */
+#define AC97_PCM_SURR_DAC_RATE	0x2e	/* PCM Surround DAC Rate */
+#define AC97_PCM_LFE_DAC_RATE	0x30	/* PCM LFE DAC Rate */
+#define AC97_PCM_LR_ADC_RATE	0x32	/* PCM LR ADC Rate */
+#define AC97_PCM_MIC_ADC_RATE	0x34	/* PCM MIC ADC Rate */
+#define AC97_CENTER_LFE_MASTER	0x36	/* Center + LFE Master Volume */
+#define AC97_SURROUND_MASTER	0x38	/* Surround (Rear) Master Volume */
+#define AC97_SPDIF		0x3a	/* S/PDIF control */
+/* range 0x3c-0x58 - MODEM */
+#define AC97_EXTENDED_MID	0x3c	/* Extended Modem ID */
+#define AC97_EXTENDED_MSTATUS	0x3e	/* Extended Modem Status and Control */
+#define AC97_LINE1_RATE		0x40	/* Line1 DAC/ADC Rate */
+#define AC97_LINE2_RATE		0x42	/* Line2 DAC/ADC Rate */
+#define AC97_HANDSET_RATE	0x44	/* Handset DAC/ADC Rate */
+#define AC97_LINE1_LEVEL	0x46	/* Line1 DAC/ADC Level */
+#define AC97_LINE2_LEVEL	0x48	/* Line2 DAC/ADC Level */
+#define AC97_HANDSET_LEVEL	0x4a	/* Handset DAC/ADC Level */
+#define AC97_GPIO_CFG		0x4c	/* GPIO Configuration */
+#define AC97_GPIO_POLARITY	0x4e	/* GPIO Pin Polarity/Type, 0=low, 1=high active */
+#define AC97_GPIO_STICKY	0x50	/* GPIO Pin Sticky, 0=not, 1=sticky */
+#define AC97_GPIO_WAKEUP	0x52	/* GPIO Pin Wakeup, 0=no int, 1=yes int */
+#define AC97_GPIO_STATUS	0x54	/* GPIO Pin Status, slot 12 */
+#define AC97_MISC_AFE		0x56	/* Miscellaneous Modem AFE Status and Control */
+/* range 0x5a-0x7b - Vendor Specific */
+#define AC97_VENDOR_ID1		0x7c	/* Vendor ID1 */
+#define AC97_VENDOR_ID2		0x7e	/* Vendor ID2 / revision */
+/* range 0x60-0x6f (page 1) - extended codec registers */
+#define AC97_CODEC_CLASS_REV	0x60	/* Codec Class/Revision */
+#define AC97_PCI_SVID		0x62	/* PCI Subsystem Vendor ID */
+#define AC97_PCI_SID		0x64	/* PCI Subsystem ID */
+#define AC97_FUNC_SELECT	0x66	/* Function Select */
+#define AC97_FUNC_INFO		0x68	/* Function Information */
+#define AC97_SENSE_INFO		0x6a	/* Sense Details */
+
+/* volume controls */
+#define AC97_MUTE_MASK_MONO	0x8000
+#define AC97_MUTE_MASK_STEREO	0x8080
+
+/* slot allocation */
+#define AC97_SLOT_TAG		0
+#define AC97_SLOT_CMD_ADDR	1
+#define AC97_SLOT_CMD_DATA	2
+#define AC97_SLOT_PCM_LEFT	3
+#define AC97_SLOT_PCM_RIGHT	4
+#define AC97_SLOT_MODEM_LINE1	5
+#define AC97_SLOT_PCM_CENTER	6
+#define AC97_SLOT_MIC		6	/* input */
+#define AC97_SLOT_SPDIF_LEFT1	6
+#define AC97_SLOT_PCM_SLEFT	7	/* surround left */
+#define AC97_SLOT_PCM_LEFT_0	7	/* double rate operation */
+#define AC97_SLOT_SPDIF_LEFT	7
+#define AC97_SLOT_PCM_SRIGHT	8	/* surround right */
+#define AC97_SLOT_PCM_RIGHT_0	8	/* double rate operation */
+#define AC97_SLOT_SPDIF_RIGHT	8
+#define AC97_SLOT_LFE		9
+#define AC97_SLOT_SPDIF_RIGHT1	9
+#define AC97_SLOT_MODEM_LINE2	10
+#define AC97_SLOT_PCM_LEFT_1	10	/* double rate operation */
+#define AC97_SLOT_SPDIF_LEFT2	10
+#define AC97_SLOT_HANDSET	11	/* output */
+#define AC97_SLOT_PCM_RIGHT_1	11	/* double rate operation */
+#define AC97_SLOT_SPDIF_RIGHT2	11
+#define AC97_SLOT_MODEM_GPIO	12	/* modem GPIO */
+#define AC97_SLOT_PCM_CENTER_1	12	/* double rate operation */
+
+/* basic capabilities (reset register) */
+#define AC97_BC_DEDICATED_MIC	0x0001	/* Dedicated Mic PCM In Channel */
+#define AC97_BC_RESERVED1	0x0002	/* Reserved (was Modem Line Codec support) */
+#define AC97_BC_BASS_TREBLE	0x0004	/* Bass & Treble Control */
+#define AC97_BC_SIM_STEREO	0x0008	/* Simulated stereo */
+#define AC97_BC_HEADPHONE	0x0010	/* Headphone Out Support */
+#define AC97_BC_LOUDNESS	0x0020	/* Loudness (bass boost) Support */
+#define AC97_BC_16BIT_DAC	0x0000	/* 16-bit DAC resolution */
+#define AC97_BC_18BIT_DAC	0x0040	/* 18-bit DAC resolution */
+#define AC97_BC_20BIT_DAC	0x0080	/* 20-bit DAC resolution */
+#define AC97_BC_DAC_MASK	0x00c0
+#define AC97_BC_16BIT_ADC	0x0000	/* 16-bit ADC resolution */
+#define AC97_BC_18BIT_ADC	0x0100	/* 18-bit ADC resolution */
+#define AC97_BC_20BIT_ADC	0x0200	/* 20-bit ADC resolution */
+#define AC97_BC_ADC_MASK	0x0300
+#define AC97_BC_3D_TECH_ID_MASK	0x7c00	/* Per-vendor ID of 3D enhancement */
+
+/* general purpose */
+#define AC97_GP_DRSS_MASK	0x0c00	/* double rate slot select */
+#define AC97_GP_DRSS_1011	0x0000	/* LR(C) 10+11(+12) */
+#define AC97_GP_DRSS_78		0x0400	/* LR 7+8 */
+
+/* powerdown bits */
+#define AC97_PD_ADC_STATUS	0x0001	/* ADC status (RO) */
+#define AC97_PD_DAC_STATUS	0x0002	/* DAC status (RO) */
+#define AC97_PD_MIXER_STATUS	0x0004	/* Analog mixer status (RO) */
+#define AC97_PD_VREF_STATUS	0x0008	/* Vref status (RO) */
+#define AC97_PD_PR0		0x0100	/* Power down PCM ADCs and input MUX */
+#define AC97_PD_PR1		0x0200	/* Power down PCM front DAC */
+#define AC97_PD_PR2		0x0400	/* Power down Mixer (Vref still on) */
+#define AC97_PD_PR3		0x0800	/* Power down Mixer (Vref off) */
+#define AC97_PD_PR4		0x1000	/* Power down AC-Link */
+#define AC97_PD_PR5		0x2000	/* Disable internal clock usage */
+#define AC97_PD_PR6		0x4000	/* Headphone amplifier */
+#define AC97_PD_EAPD		0x8000	/* External Amplifer Power Down (EAPD) */
+
+/* extended audio ID bit defines */
+#define AC97_EI_VRA		0x0001	/* Variable bit rate supported */
+#define AC97_EI_DRA		0x0002	/* Double rate supported */
+#define AC97_EI_SPDIF		0x0004	/* S/PDIF out supported */
+#define AC97_EI_VRM		0x0008	/* Variable bit rate supported for MIC */
+#define AC97_EI_DACS_SLOT_MASK	0x0030	/* DACs slot assignment */
+#define AC97_EI_DACS_SLOT_SHIFT	4
+#define AC97_EI_CDAC		0x0040	/* PCM Center DAC available */
+#define AC97_EI_SDAC		0x0080	/* PCM Surround DACs available */
+#define AC97_EI_LDAC		0x0100	/* PCM LFE DAC available */
+#define AC97_EI_AMAP		0x0200	/* indicates optional slot/DAC mapping based on codec ID */
+#define AC97_EI_REV_MASK	0x0c00	/* AC'97 revision mask */
+#define AC97_EI_REV_22		0x0400	/* AC'97 revision 2.2 */
+#define AC97_EI_REV_23		0x0800	/* AC'97 revision 2.3 */
+#define AC97_EI_REV_SHIFT	10
+#define AC97_EI_ADDR_MASK	0xc000	/* physical codec ID (address) */
+#define AC97_EI_ADDR_SHIFT	14
+
+/* extended audio status and control bit defines */
+#define AC97_EA_VRA		0x0001	/* Variable bit rate enable bit */
+#define AC97_EA_DRA		0x0002	/* Double-rate audio enable bit */
+#define AC97_EA_SPDIF		0x0004	/* S/PDIF out enable bit */
+#define AC97_EA_VRM		0x0008	/* Variable bit rate for MIC enable bit */
+#define AC97_EA_SPSA_SLOT_MASK	0x0030	/* Mask for slot assignment bits */
+#define AC97_EA_SPSA_SLOT_SHIFT 4
+#define AC97_EA_SPSA_3_4	0x0000	/* Slot assigned to 3 & 4 */
+#define AC97_EA_SPSA_7_8	0x0010	/* Slot assigned to 7 & 8 */
+#define AC97_EA_SPSA_6_9	0x0020	/* Slot assigned to 6 & 9 */
+#define AC97_EA_SPSA_10_11	0x0030	/* Slot assigned to 10 & 11 */
+#define AC97_EA_CDAC		0x0040	/* PCM Center DAC is ready (Read only) */
+#define AC97_EA_SDAC		0x0080	/* PCM Surround DACs are ready (Read only) */
+#define AC97_EA_LDAC		0x0100	/* PCM LFE DAC is ready (Read only) */
+#define AC97_EA_MDAC		0x0200	/* MIC ADC is ready (Read only) */
+#define AC97_EA_SPCV		0x0400	/* S/PDIF configuration valid (Read only) */
+#define AC97_EA_PRI		0x0800	/* Turns the PCM Center DAC off */
+#define AC97_EA_PRJ		0x1000	/* Turns the PCM Surround DACs off */
+#define AC97_EA_PRK		0x2000	/* Turns the PCM LFE DAC off */
+#define AC97_EA_PRL		0x4000	/* Turns the MIC ADC off */
+
+/* S/PDIF control bit defines */
+#define AC97_SC_PRO		0x0001	/* Professional status */
+#define AC97_SC_NAUDIO		0x0002	/* Non audio stream */
+#define AC97_SC_COPY		0x0004	/* Copyright status */
+#define AC97_SC_PRE		0x0008	/* Preemphasis status */
+#define AC97_SC_CC_MASK		0x07f0	/* Category Code mask */
+#define AC97_SC_CC_SHIFT	4
+#define AC97_SC_L		0x0800	/* Generation Level status */
+#define AC97_SC_SPSR_MASK	0x3000	/* S/PDIF Sample Rate bits */
+#define AC97_SC_SPSR_SHIFT	12
+#define AC97_SC_SPSR_44K	0x0000	/* Use 44.1kHz Sample rate */
+#define AC97_SC_SPSR_48K	0x2000	/* Use 48kHz Sample rate */
+#define AC97_SC_SPSR_32K	0x3000	/* Use 32kHz Sample rate */
+#define AC97_SC_DRS		0x4000	/* Double Rate S/PDIF */
+#define AC97_SC_V		0x8000	/* Validity status */
+
+/* Interrupt and Paging bit defines (AC'97 2.3) */
+#define AC97_PAGE_MASK		0x000f	/* Page Selector */
+#define AC97_PAGE_VENDOR	0	/* Vendor-specific registers */
+#define AC97_PAGE_1		1	/* Extended Codec Registers page 1 */
+#define AC97_INT_ENABLE		0x0800	/* Interrupt Enable */
+#define AC97_INT_SENSE		0x1000	/* Sense Cycle */
+#define AC97_INT_CAUSE_SENSE	0x2000	/* Sense Cycle Completed (RO) */
+#define AC97_INT_CAUSE_GPIO	0x4000	/* GPIO bits changed (RO) */
+#define AC97_INT_STATUS		0x8000	/* Interrupt Status */
+
+/* extended modem ID bit defines */
+#define AC97_MEI_LINE1		0x0001	/* Line1 present */
+#define AC97_MEI_LINE2		0x0002	/* Line2 present */
+#define AC97_MEI_HANDSET	0x0004	/* Handset present */
+#define AC97_MEI_CID1		0x0008	/* caller ID decode for Line1 is supported */
+#define AC97_MEI_CID2		0x0010	/* caller ID decode for Line2 is supported */
+#define AC97_MEI_ADDR_MASK	0xc000	/* physical codec ID (address) */
+#define AC97_MEI_ADDR_SHIFT	14
+
+/* extended modem status and control bit defines */
+#define AC97_MEA_GPIO		0x0001	/* GPIO is ready (ro) */
+#define AC97_MEA_MREF		0x0002	/* Vref is up to nominal level (ro) */
+#define AC97_MEA_ADC1		0x0004	/* ADC1 operational (ro) */
+#define AC97_MEA_DAC1		0x0008	/* DAC1 operational (ro) */
+#define AC97_MEA_ADC2		0x0010	/* ADC2 operational (ro) */
+#define AC97_MEA_DAC2		0x0020	/* DAC2 operational (ro) */
+#define AC97_MEA_HADC		0x0040	/* HADC operational (ro) */
+#define AC97_MEA_HDAC		0x0080	/* HDAC operational (ro) */
+#define AC97_MEA_PRA		0x0100	/* GPIO power down (high) */
+#define AC97_MEA_PRB		0x0200	/* reserved */
+#define AC97_MEA_PRC		0x0400	/* ADC1 power down (high) */
+#define AC97_MEA_PRD		0x0800	/* DAC1 power down (high) */
+#define AC97_MEA_PRE		0x1000	/* ADC2 power down (high) */
+#define AC97_MEA_PRF		0x2000	/* DAC2 power down (high) */
+#define AC97_MEA_PRG		0x4000	/* HADC power down (high) */
+#define AC97_MEA_PRH		0x8000	/* HDAC power down (high) */
+
+/* modem gpio status defines */
+#define AC97_GPIO_LINE1_OH      0x0001  /* Off Hook Line1 */
+#define AC97_GPIO_LINE1_RI      0x0002  /* Ring Detect Line1 */
+#define AC97_GPIO_LINE1_CID     0x0004  /* Caller ID path enable Line1 */
+#define AC97_GPIO_LINE1_LCS     0x0008  /* Loop Current Sense Line1 */
+#define AC97_GPIO_LINE1_PULSE   0x0010  /* Opt./ Pulse Dial Line1 (out) */
+#define AC97_GPIO_LINE1_HL1R    0x0020  /* Opt./ Handset to Line1 relay control (out) */
+#define AC97_GPIO_LINE1_HOHD    0x0040  /* Opt./ Handset off hook detect Line1 (in) */
+#define AC97_GPIO_LINE12_AC     0x0080  /* Opt./ Int.bit 1 / Line1/2 AC (out) */
+#define AC97_GPIO_LINE12_DC     0x0100  /* Opt./ Int.bit 2 / Line1/2 DC (out) */
+#define AC97_GPIO_LINE12_RS     0x0200  /* Opt./ Int.bit 3 / Line1/2 RS (out) */
+#define AC97_GPIO_LINE2_OH      0x0400  /* Off Hook Line2 */
+#define AC97_GPIO_LINE2_RI      0x0800  /* Ring Detect Line2 */
+#define AC97_GPIO_LINE2_CID     0x1000  /* Caller ID path enable Line2 */
+#define AC97_GPIO_LINE2_LCS     0x2000  /* Loop Current Sense Line2 */
+#define AC97_GPIO_LINE2_PULSE   0x4000  /* Opt./ Pulse Dial Line2 (out) */
+#define AC97_GPIO_LINE2_HL1R    0x8000  /* Opt./ Handset to Line2 relay control (out) */
+
+/* specific - SigmaTel */
+#define AC97_SIGMATEL_OUTSEL	0x64	/* Output Select, STAC9758 */
+#define AC97_SIGMATEL_INSEL	0x66	/* Input Select, STAC9758 */
+#define AC97_SIGMATEL_IOMISC	0x68	/* STAC9758 */
+#define AC97_SIGMATEL_ANALOG	0x6c	/* Analog Special */
+#define AC97_SIGMATEL_DAC2INVERT 0x6e
+#define AC97_SIGMATEL_BIAS1	0x70
+#define AC97_SIGMATEL_BIAS2	0x72
+#define AC97_SIGMATEL_VARIOUS	0x72	/* STAC9758 */
+#define AC97_SIGMATEL_MULTICHN	0x74	/* Multi-Channel programming */
+#define AC97_SIGMATEL_CIC1	0x76
+#define AC97_SIGMATEL_CIC2	0x78
+
+/* specific - Analog Devices */
+#define AC97_AD_TEST		0x5a	/* test register */
+#define AC97_AD_TEST2		0x5c	/* undocumented test register 2 */
+#define AC97_AD_HPFD_SHIFT	12	/* High Pass Filter Disable */
+#define AC97_AD_CODEC_CFG	0x70	/* codec configuration */
+#define AC97_AD_JACK_SPDIF	0x72	/* Jack Sense & S/PDIF */
+#define AC97_AD_SERIAL_CFG	0x74	/* Serial Configuration */
+#define AC97_AD_MISC		0x76	/* Misc Control Bits */
+#define AC97_AD_VREFD_SHIFT	2	/* V_REFOUT Disable (AD1888) */
+
+/* specific - Cirrus Logic */
+#define AC97_CSR_ACMODE		0x5e	/* AC Mode Register */
+#define AC97_CSR_MISC_CRYSTAL	0x60	/* Misc Crystal Control */
+#define AC97_CSR_SPDIF		0x68	/* S/PDIF Register */
+#define AC97_CSR_SERIAL		0x6a	/* Serial Port Control */
+#define AC97_CSR_SPECF_ADDR	0x6c	/* Special Feature Address */
+#define AC97_CSR_SPECF_DATA	0x6e	/* Special Feature Data */
+#define AC97_CSR_BDI_STATUS	0x7a	/* BDI Status */
+
+/* specific - Conexant */
+#define AC97_CXR_AUDIO_MISC	0x5c
+#define AC97_CXR_SPDIFEN	(1<<3)
+#define AC97_CXR_COPYRGT	(1<<2)
+#define AC97_CXR_SPDIF_MASK	(3<<0)
+#define AC97_CXR_SPDIF_PCM	0x0
+#define AC97_CXR_SPDIF_AC3	0x2
+
+/* specific - ALC */
+#define AC97_ALC650_SPDIF_INPUT_STATUS1	0x60
+/* S/PDIF input status 1 bit defines */
+#define AC97_ALC650_PRO             0x0001  /* Professional status */
+#define AC97_ALC650_NAUDIO          0x0002  /* Non audio stream */
+#define AC97_ALC650_COPY            0x0004  /* Copyright status */
+#define AC97_ALC650_PRE             0x0038  /* Preemphasis status */
+#define AC97_ALC650_PRE_SHIFT       3
+#define AC97_ALC650_MODE            0x00C0  /* Preemphasis status */
+#define AC97_ALC650_MODE_SHIFT      6
+#define AC97_ALC650_CC_MASK         0x7f00  /* Category Code mask */
+#define AC97_ALC650_CC_SHIFT        8
+#define AC97_ALC650_L               0x8000  /* Generation Level status */
+
+#define AC97_ALC650_SPDIF_INPUT_STATUS2	0x62
+/* S/PDIF input status 2 bit defines */
+#define AC97_ALC650_SOUCE_MASK      0x000f  /* Source number */
+#define AC97_ALC650_CHANNEL_MASK    0x00f0  /* Channel number */
+#define AC97_ALC650_CHANNEL_SHIFT   4 
+#define AC97_ALC650_SPSR_MASK       0x0f00  /* S/PDIF Sample Rate bits */
+#define AC97_ALC650_SPSR_SHIFT      8
+#define AC97_ALC650_SPSR_44K        0x0000  /* Use 44.1kHz Sample rate */
+#define AC97_ALC650_SPSR_48K        0x0200  /* Use 48kHz Sample rate */
+#define AC97_ALC650_SPSR_32K        0x0300  /* Use 32kHz Sample rate */
+#define AC97_ALC650_CLOCK_ACCURACY  0x3000  /* Clock accuracy */
+#define AC97_ALC650_CLOCK_SHIFT     12
+#define AC97_ALC650_CLOCK_LOCK      0x4000  /* Clock locked status */
+#define AC97_ALC650_V               0x8000  /* Validity status */
+
+#define AC97_ALC650_SURR_DAC_VOL	0x64
+#define AC97_ALC650_LFE_DAC_VOL		0x66
+#define AC97_ALC650_UNKNOWN1		0x68
+#define AC97_ALC650_MULTICH		0x6a
+#define AC97_ALC650_UNKNOWN2		0x6c
+#define AC97_ALC650_REVISION		0x6e
+#define AC97_ALC650_UNKNOWN3		0x70
+#define AC97_ALC650_UNKNOWN4		0x72
+#define AC97_ALC650_MISC		0x74
+#define AC97_ALC650_GPIO_SETUP		0x76
+#define AC97_ALC650_GPIO_STATUS		0x78
+#define AC97_ALC650_CLOCK		0x7a
+
+/* specific - Yamaha YMF7x3 */
+#define AC97_YMF7X3_DIT_CTRL	0x66	/* DIT Control (YMF743) / 2 (YMF753) */
+#define AC97_YMF7X3_3D_MODE_SEL	0x68	/* 3D Mode Select */
+
+/* specific - C-Media */
+#define AC97_CM9738_VENDOR_CTRL	0x5a
+#define AC97_CM9739_MULTI_CHAN	0x64
+#define AC97_CM9739_SPDIF_IN_STATUS	0x68 /* 32bit */
+#define AC97_CM9739_SPDIF_CTRL	0x6c
+
+/* specific - wolfson */
+#define AC97_WM97XX_FMIXER_VOL  0x72
+#define AC97_WM9704_RMIXER_VOL  0x74
+#define AC97_WM9704_TEST        0x5a
+#define AC97_WM9704_RPCM_VOL    0x70
+#define AC97_WM9711_OUT3VOL     0x16
+
+
+/* ac97->scaps */
+#define AC97_SCAP_AUDIO		(1<<0)	/* audio codec 97 */
+#define AC97_SCAP_MODEM		(1<<1)	/* modem codec 97 */
+#define AC97_SCAP_SURROUND_DAC	(1<<2)	/* surround L&R DACs are present */
+#define AC97_SCAP_CENTER_LFE_DAC (1<<3)	/* center and LFE DACs are present */
+#define AC97_SCAP_SKIP_AUDIO	(1<<4)	/* skip audio part of codec */
+#define AC97_SCAP_SKIP_MODEM	(1<<5)	/* skip modem part of codec */
+#define AC97_SCAP_INDEP_SDIN	(1<<6)	/* independent SDIN */
+#define AC97_SCAP_INV_EAPD	(1<<7)	/* inverted EAPD */
+#define AC97_SCAP_DETECT_BY_VENDOR (1<<8) /* use vendor registers for read tests */
+#define AC97_SCAP_NO_SPDIF	(1<<9)	/* don't build SPDIF controls */
+#define AC97_SCAP_EAPD_LED	(1<<10)	/* EAPD as mute LED */
+#define AC97_SCAP_POWER_SAVE	(1<<11)	/* capable for aggressive power-saving */
+
+/* ac97->flags */
+#define AC97_HAS_PC_BEEP	(1<<0)	/* force PC Speaker usage */
+#define AC97_AD_MULTI		(1<<1)	/* Analog Devices - multi codecs */
+#define AC97_CS_SPDIF		(1<<2)	/* Cirrus Logic uses funky SPDIF */
+#define AC97_CX_SPDIF		(1<<3)	/* Conexant's spdif interface */
+#define AC97_STEREO_MUTES	(1<<4)	/* has stereo mute bits */
+#define AC97_DOUBLE_RATE	(1<<5)	/* supports double rate playback */
+#define AC97_HAS_NO_MASTER_VOL	(1<<6)	/* no Master volume */
+#define AC97_HAS_NO_PCM_VOL	(1<<7)	/* no PCM volume */
+#define AC97_DEFAULT_POWER_OFF	(1<<8)	/* no RESET write */
+#define AC97_MODEM_PATCH	(1<<9)	/* modem patch */
+#define AC97_HAS_NO_REC_GAIN	(1<<10) /* no Record gain */
+#define AC97_HAS_NO_PHONE	(1<<11) /* no PHONE volume */
+#define AC97_HAS_NO_PC_BEEP	(1<<12) /* no PC Beep volume */
+#define AC97_HAS_NO_VIDEO	(1<<13) /* no Video volume */
+#define AC97_HAS_NO_CD		(1<<14) /* no CD volume */
+#define AC97_HAS_NO_MIC	(1<<15) /* no MIC volume */
+#define AC97_HAS_NO_TONE	(1<<16) /* no Tone volume */
+#define AC97_HAS_NO_STD_PCM	(1<<17)	/* no standard AC97 PCM volume and mute */
+#define AC97_HAS_NO_AUX		(1<<18) /* no standard AC97 AUX volume and mute */
+#define AC97_HAS_8CH		(1<<19) /* supports 8-channel output */
+
+/* rates indexes */
+#define AC97_RATES_FRONT_DAC	0
+#define AC97_RATES_SURR_DAC	1
+#define AC97_RATES_LFE_DAC	2
+#define AC97_RATES_ADC		3
+#define AC97_RATES_MIC_ADC	4
+#define AC97_RATES_SPDIF	5
+
+/*
+ *
+ */
+
+struct snd_ac97;
+
+struct snd_ac97_build_ops {
+	int (*build_3d) (struct snd_ac97 *ac97);
+	int (*build_specific) (struct snd_ac97 *ac97);
+	int (*build_spdif) (struct snd_ac97 *ac97);
+	int (*build_post_spdif) (struct snd_ac97 *ac97);
+#ifdef CONFIG_PM
+	void (*suspend) (struct snd_ac97 *ac97);
+	void (*resume) (struct snd_ac97 *ac97);
+#endif
+	void (*update_jacks) (struct snd_ac97 *ac97);	/* for jack-sharing */
+};
+
+struct snd_ac97_bus_ops {
+	void (*reset) (struct snd_ac97 *ac97);
+	void (*warm_reset)(struct snd_ac97 *ac97);
+	void (*write) (struct snd_ac97 *ac97, unsigned short reg, unsigned short val);
+	unsigned short (*read) (struct snd_ac97 *ac97, unsigned short reg);
+	void (*wait) (struct snd_ac97 *ac97);
+	void (*init) (struct snd_ac97 *ac97);
+};
+
+struct snd_ac97_bus {
+	/* -- lowlevel (hardware) driver specific -- */
+	struct snd_ac97_bus_ops *ops;
+	void *private_data;
+	void (*private_free) (struct snd_ac97_bus *bus);
+	/* --- */
+	struct snd_card *card;
+	unsigned short num;	/* bus number */
+	unsigned short no_vra: 1, /* bridge doesn't support VRA */
+		       dra: 1,	/* bridge supports double rate */
+		       isdin: 1;/* independent SDIN */
+	unsigned int clock;	/* AC'97 base clock (usually 48000Hz) */
+	spinlock_t bus_lock;	/* used mainly for slot allocation */
+	unsigned short used_slots[2][4]; /* actually used PCM slots */
+	unsigned short pcms_count; /* count of PCMs */
+	struct ac97_pcm *pcms;
+	struct snd_ac97 *codec[4];
+	struct snd_info_entry *proc;
+};
+
+/* static resolution table */
+struct snd_ac97_res_table {
+	unsigned short reg;	/* register */
+	unsigned short bits;	/* resolution bitmask */
+};
+
+struct snd_ac97_template {
+	void *private_data;
+	void (*private_free) (struct snd_ac97 *ac97);
+	struct pci_dev *pci;	/* assigned PCI device - used for quirks */
+	unsigned short num;	/* number of codec: 0 = primary, 1 = secondary */
+	unsigned short addr;	/* physical address of codec [0-3] */
+	unsigned int scaps;	/* driver capabilities */
+	const struct snd_ac97_res_table *res_table;	/* static resolution */
+};
+
+struct snd_ac97 {
+	/* -- lowlevel (hardware) driver specific -- */
+	const struct snd_ac97_build_ops *build_ops;
+	void *private_data;
+	void (*private_free) (struct snd_ac97 *ac97);
+	/* --- */
+	struct snd_ac97_bus *bus;
+	struct pci_dev *pci;	/* assigned PCI device - used for quirks */
+	struct snd_info_entry *proc;
+	struct snd_info_entry *proc_regs;
+	unsigned short subsystem_vendor;
+	unsigned short subsystem_device;
+	struct mutex reg_mutex;
+	struct mutex page_mutex;	/* mutex for AD18xx multi-codecs and paging (2.3) */
+	unsigned short num;	/* number of codec: 0 = primary, 1 = secondary */
+	unsigned short addr;	/* physical address of codec [0-3] */
+	unsigned int id;	/* identification of codec */
+	unsigned short caps;	/* capabilities (register 0) */
+	unsigned short ext_id;	/* extended feature identification (register 28) */
+	unsigned short ext_mid;	/* extended modem ID (register 3C) */
+	const struct snd_ac97_res_table *res_table;	/* static resolution */
+	unsigned int scaps;	/* driver capabilities */
+	unsigned int flags;	/* specific code */
+	unsigned int rates[6];	/* see AC97_RATES_* defines */
+	unsigned int spdif_status;
+	unsigned short regs[0x80]; /* register cache */
+	DECLARE_BITMAP(reg_accessed, 0x80); /* bit flags */
+	union {			/* vendor specific code */
+		struct {
+			unsigned short unchained[3];	// 0 = C34, 1 = C79, 2 = C69
+			unsigned short chained[3];	// 0 = C34, 1 = C79, 2 = C69
+			unsigned short id[3];		// codec IDs (lower 16-bit word)
+			unsigned short pcmreg[3];	// PCM registers
+			unsigned short codec_cfg[3];	// CODEC_CFG bits
+			unsigned char swap_mic_linein;	// AD1986/AD1986A only
+			unsigned char lo_as_master;	/* LO as master */
+		} ad18xx;
+		unsigned int dev_flags;		/* device specific */
+	} spec;
+	/* jack-sharing info */
+	unsigned char indep_surround;
+	unsigned char channel_mode;
+
+#ifdef CONFIG_SND_AC97_POWER_SAVE
+	unsigned int power_up;	/* power states */
+	struct delayed_work power_work;
+#endif
+	struct device dev;
+};
+
+#define to_ac97_t(d) container_of(d, struct snd_ac97, dev)
+
+/* conditions */
+static inline int ac97_is_audio(struct snd_ac97 * ac97)
+{
+	return (ac97->scaps & AC97_SCAP_AUDIO);
+}
+static inline int ac97_is_modem(struct snd_ac97 * ac97)
+{
+	return (ac97->scaps & AC97_SCAP_MODEM);
+}
+static inline int ac97_is_rev22(struct snd_ac97 * ac97)
+{
+	return (ac97->ext_id & AC97_EI_REV_MASK) >= AC97_EI_REV_22;
+}
+static inline int ac97_can_amap(struct snd_ac97 * ac97)
+{
+	return (ac97->ext_id & AC97_EI_AMAP) != 0;
+}
+static inline int ac97_can_spdif(struct snd_ac97 * ac97)
+{
+	return (ac97->ext_id & AC97_EI_SPDIF) != 0;
+}
+
+/* functions */
+/* create new AC97 bus */
+int snd_ac97_bus(struct snd_card *card, int num, struct snd_ac97_bus_ops *ops,
+		 void *private_data, struct snd_ac97_bus **rbus);
+/* create mixer controls */
+int snd_ac97_mixer(struct snd_ac97_bus *bus, struct snd_ac97_template *template,
+		   struct snd_ac97 **rac97);
+const char *snd_ac97_get_short_name(struct snd_ac97 *ac97);
+
+void snd_ac97_write(struct snd_ac97 *ac97, unsigned short reg, unsigned short value);
+unsigned short snd_ac97_read(struct snd_ac97 *ac97, unsigned short reg);
+void snd_ac97_write_cache(struct snd_ac97 *ac97, unsigned short reg, unsigned short value);
+int snd_ac97_update(struct snd_ac97 *ac97, unsigned short reg, unsigned short value);
+int snd_ac97_update_bits(struct snd_ac97 *ac97, unsigned short reg, unsigned short mask, unsigned short value);
+#ifdef CONFIG_SND_AC97_POWER_SAVE
+int snd_ac97_update_power(struct snd_ac97 *ac97, int reg, int powerup);
+#else
+static inline int snd_ac97_update_power(struct snd_ac97 *ac97, int reg,
+					int powerup)
+{
+	return 0;
+}
+#endif
+#ifdef CONFIG_PM
+void snd_ac97_suspend(struct snd_ac97 *ac97);
+void snd_ac97_resume(struct snd_ac97 *ac97);
+#endif
+
+/* quirk types */
+enum {
+	AC97_TUNE_DEFAULT = -1,	/* use default from quirk list (not valid in list) */
+	AC97_TUNE_NONE = 0,	/* nothing extra to do */
+	AC97_TUNE_HP_ONLY,	/* headphone (true line-out) control as master only */
+	AC97_TUNE_SWAP_HP,	/* swap headphone and master controls */
+	AC97_TUNE_SWAP_SURROUND, /* swap master and surround controls */
+	AC97_TUNE_AD_SHARING,	/* for AD1985, turn on OMS bit and use headphone */
+	AC97_TUNE_ALC_JACK,	/* for Realtek, enable JACK detection */
+	AC97_TUNE_INV_EAPD,	/* inverted EAPD implementation */
+	AC97_TUNE_MUTE_LED,	/* EAPD bit works as mute LED */
+	AC97_TUNE_HP_MUTE_LED,  /* EAPD bit works as mute LED, use headphone control as master */
+};
+
+struct ac97_quirk {
+	unsigned short subvendor; /* PCI subsystem vendor id */
+	unsigned short subdevice; /* PCI subsystem device id */
+	unsigned short mask;	/* device id bit mask, 0 = accept all */
+	unsigned int codec_id;	/* codec id (if any), 0 = accept all */
+	const char *name;	/* name shown as info */
+	int type;		/* quirk type above */
+};
+
+int snd_ac97_tune_hardware(struct snd_ac97 *ac97, struct ac97_quirk *quirk, const char *override);
+int snd_ac97_set_rate(struct snd_ac97 *ac97, int reg, unsigned int rate);
+
+/*
+ * PCM allocation
+ */
+
+enum ac97_pcm_cfg {
+	AC97_PCM_CFG_FRONT = 2,
+	AC97_PCM_CFG_REAR = 10,		/* alias surround */
+	AC97_PCM_CFG_LFE = 11,		/* center + lfe */
+	AC97_PCM_CFG_40 = 4,		/* front + rear */
+	AC97_PCM_CFG_51 = 6,		/* front + rear + center/lfe */
+	AC97_PCM_CFG_SPDIF = 20
+};
+
+struct ac97_pcm {
+	struct snd_ac97_bus *bus;
+	unsigned int stream: 1,	   	   /* stream type: 1 = capture */
+		     exclusive: 1,	   /* exclusive mode, don't override with other pcms */
+		     copy_flag: 1,	   /* lowlevel driver must fill all entries */
+		     spdif: 1;		   /* spdif pcm */
+	unsigned short aslots;		   /* active slots */
+	unsigned short cur_dbl;		   /* current double-rate state */
+	unsigned int rates;		   /* available rates */
+	struct {
+		unsigned short slots;	   /* driver input: requested AC97 slot numbers */
+		unsigned short rslots[4];  /* allocated slots per codecs */
+		unsigned char rate_table[4];
+		struct snd_ac97 *codec[4];	   /* allocated codecs */
+	} r[2];				   /* 0 = standard rates, 1 = double rates */
+	unsigned long private_value;	   /* used by the hardware driver */
+};
+
+int snd_ac97_pcm_assign(struct snd_ac97_bus *ac97,
+			unsigned short pcms_count,
+			const struct ac97_pcm *pcms);
+int snd_ac97_pcm_open(struct ac97_pcm *pcm, unsigned int rate,
+		      enum ac97_pcm_cfg cfg, unsigned short slots);
+int snd_ac97_pcm_close(struct ac97_pcm *pcm);
+int snd_ac97_pcm_double_rate_rules(struct snd_pcm_runtime *runtime);
+
+/* ad hoc AC97 device driver access */
+extern struct bus_type ac97_bus_type;
+
+/* AC97 platform_data adding function */
+static inline void snd_ac97_dev_add_pdata(struct snd_ac97 *ac97, void *data)
+{
+	ac97->dev.platform_data = data;
+}
+
+#endif /* __SOUND_AC97_CODEC_H */
diff --git a/include/sound/aci.h b/include/sound/aci.h
new file mode 100644
index 00000000..ee639d35
--- /dev/null
+++ b/include/sound/aci.h
@@ -0,0 +1,90 @@
+#ifndef _ACI_H_
+#define _ACI_H_
+
+#define ACI_REG_COMMAND		0	/* write register offset */
+#define ACI_REG_STATUS		1	/* read register offset */
+#define ACI_REG_BUSY		2	/* busy register offset */
+#define ACI_REG_RDS		2	/* PCM20: RDS register offset */
+#define ACI_MINTIME		500	/* ACI time out limit */
+
+#define ACI_SET_MUTE		0x0d
+#define ACI_SET_POWERAMP	0x0f
+#define ACI_SET_TUNERMUTE	0xa3
+#define ACI_SET_TUNERMONO	0xa4
+#define ACI_SET_IDE		0xd0
+#define ACI_SET_WSS		0xd1
+#define ACI_SET_SOLOMODE	0xd2
+#define ACI_SET_PREAMP		0x03
+#define ACI_GET_PREAMP		0x21
+#define ACI_WRITE_TUNE		0xa7
+#define ACI_READ_TUNERSTEREO	0xa8
+#define ACI_READ_TUNERSTATION	0xa9
+#define ACI_READ_VERSION	0xf1
+#define ACI_READ_IDCODE		0xf2
+#define ACI_INIT		0xff
+#define ACI_STATUS		0xf0
+#define ACI_S_GENERAL		0x00
+#define ACI_ERROR_OP		0xdf
+
+/* ACI Mixer */
+
+/* These are the values for the right channel GET registers.
+   Add an offset of 0x01 for the left channel register.
+   (left=right+0x01) */
+
+#define ACI_GET_MASTER		0x03
+#define ACI_GET_MIC		0x05
+#define ACI_GET_LINE		0x07
+#define ACI_GET_CD		0x09
+#define ACI_GET_SYNTH		0x0b
+#define ACI_GET_PCM		0x0d
+#define ACI_GET_LINE1		0x10	/* Radio on PCM20 */
+#define ACI_GET_LINE2		0x12
+
+#define ACI_GET_EQ1		0x22	/* from Bass ... */
+#define ACI_GET_EQ2		0x24
+#define ACI_GET_EQ3		0x26
+#define ACI_GET_EQ4		0x28
+#define ACI_GET_EQ5		0x2a
+#define ACI_GET_EQ6		0x2c
+#define ACI_GET_EQ7		0x2e	/* ... to Treble */
+
+/* And these are the values for the right channel SET registers.
+   For left channel access you have to add an offset of 0x08.
+   MASTER is an exception, which needs an offset of 0x01 */
+
+#define ACI_SET_MASTER		0x00
+#define ACI_SET_MIC		0x30
+#define ACI_SET_LINE		0x31
+#define ACI_SET_CD		0x34
+#define ACI_SET_SYNTH		0x33
+#define ACI_SET_PCM		0x32
+#define ACI_SET_LINE1		0x35	/* Radio on PCM20 */
+#define ACI_SET_LINE2		0x36
+
+#define ACI_SET_EQ1		0x40	/* from Bass ... */
+#define ACI_SET_EQ2		0x41
+#define ACI_SET_EQ3		0x42
+#define ACI_SET_EQ4		0x43
+#define ACI_SET_EQ5		0x44
+#define ACI_SET_EQ6		0x45
+#define ACI_SET_EQ7		0x46	/* ... to Treble */
+
+struct snd_miro_aci {
+	unsigned long aci_port;
+	int aci_vendor;
+	int aci_product;
+	int aci_version;
+	int aci_amp;
+	int aci_preamp;
+	int aci_solomode;
+
+	struct mutex aci_mutex;
+};
+
+int snd_aci_cmd(struct snd_miro_aci *aci, int write1, int write2, int write3);
+
+struct snd_miro_aci *snd_aci_get_aci(void);
+
+#endif  /* _ACI_H_ */
+
diff --git a/include/sound/ad1816a.h b/include/sound/ad1816a.h
new file mode 100644
index 00000000..d010858c
--- /dev/null
+++ b/include/sound/ad1816a.h
@@ -0,0 +1,175 @@
+#ifndef __SOUND_AD1816A_H
+#define __SOUND_AD1816A_H
+
+/*
+    ad1816a.h - definitions for ADI SoundPort AD1816A chip.
+    Copyright (C) 1999-2000 by Massimo Piccioni <dafastidio@libero.it>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+*/
+
+#include "control.h"
+#include "pcm.h"
+#include "timer.h"
+
+#define AD1816A_REG(r)			(chip->port + r)
+
+#define AD1816A_CHIP_STATUS		0x00
+#define AD1816A_INDIR_ADDR		0x00
+#define AD1816A_INTERRUPT_STATUS	0x01
+#define AD1816A_INDIR_DATA_LOW		0x02
+#define AD1816A_INDIR_DATA_HIGH		0x03
+#define AD1816A_PIO_DEBUG		0x04
+#define AD1816A_PIO_STATUS		0x05
+#define AD1816A_PIO_DATA		0x06
+#define AD1816A_RESERVED_7		0x07
+#define AD1816A_PLAYBACK_CONFIG		0x08
+#define AD1816A_CAPTURE_CONFIG		0x09
+#define AD1816A_RESERVED_10		0x0a
+#define AD1816A_RESERVED_11		0x0b
+#define AD1816A_JOYSTICK_RAW_DATA	0x0c
+#define AD1816A_JOYSTICK_CTRL		0x0d
+#define AD1816A_JOY_POS_DATA_LOW	0x0e
+#define AD1816A_JOY_POS_DATA_HIGH	0x0f
+
+#define AD1816A_LOW_BYTE_TMP		0x00
+#define AD1816A_INTERRUPT_ENABLE	0x01
+#define AD1816A_EXTERNAL_CTRL		0x01
+#define AD1816A_PLAYBACK_SAMPLE_RATE	0x02
+#define AD1816A_CAPTURE_SAMPLE_RATE	0x03
+#define AD1816A_VOICE_ATT		0x04
+#define AD1816A_FM_ATT			0x05
+#define AD1816A_I2S_1_ATT		0x06
+#define AD1816A_I2S_0_ATT		0x07
+#define AD1816A_PLAYBACK_BASE_COUNT	0x08
+#define AD1816A_PLAYBACK_CURR_COUNT	0x09
+#define AD1816A_CAPTURE_BASE_COUNT	0x0a
+#define AD1816A_CAPTURE_CURR_COUNT	0x0b
+#define AD1816A_TIMER_BASE_COUNT	0x0c
+#define AD1816A_TIMER_CURR_COUNT	0x0d
+#define AD1816A_MASTER_ATT		0x0e
+#define AD1816A_CD_GAIN_ATT		0x0f
+#define AD1816A_SYNTH_GAIN_ATT		0x10
+#define AD1816A_VID_GAIN_ATT		0x11
+#define AD1816A_LINE_GAIN_ATT		0x12
+#define AD1816A_MIC_GAIN_ATT		0x13
+#define AD1816A_PHONE_IN_GAIN_ATT	0x13
+#define AD1816A_ADC_SOURCE_SEL		0x14
+#define AD1816A_ADC_PGA			0x14
+#define AD1816A_CHIP_CONFIG		0x20
+#define AD1816A_DSP_CONFIG		0x21
+#define AD1816A_FM_SAMPLE_RATE		0x22
+#define AD1816A_I2S_1_SAMPLE_RATE	0x23
+#define AD1816A_I2S_0_SAMPLE_RATE	0x24
+#define AD1816A_RESERVED_37		0x25
+#define AD1816A_PROGRAM_CLOCK_RATE	0x26
+#define AD1816A_3D_PHAT_CTRL		0x27
+#define AD1816A_PHONE_OUT_ATT		0x27
+#define AD1816A_RESERVED_40		0x28
+#define AD1816A_HW_VOL_BUT		0x29
+#define AD1816A_DSP_MAILBOX_0		0x2a
+#define AD1816A_DSP_MAILBOX_1		0x2b
+#define AD1816A_POWERDOWN_CTRL		0x2c
+#define AD1816A_TIMER_CTRL		0x2c
+#define AD1816A_VERSION_ID		0x2d
+#define AD1816A_RESERVED_46		0x2e
+
+#define AD1816A_READY			0x80
+
+#define AD1816A_PLAYBACK_IRQ_PENDING	0x80
+#define AD1816A_CAPTURE_IRQ_PENDING	0x40
+#define AD1816A_TIMER_IRQ_PENDING	0x20
+
+#define AD1816A_PLAYBACK_ENABLE		0x01
+#define AD1816A_PLAYBACK_PIO		0x02
+#define AD1816A_CAPTURE_ENABLE		0x01
+#define AD1816A_CAPTURE_PIO		0x02
+
+#define AD1816A_FMT_LINEAR_8		0x00
+#define AD1816A_FMT_ULAW_8		0x08
+#define AD1816A_FMT_LINEAR_16_LIT	0x10
+#define AD1816A_FMT_ALAW_8		0x18
+#define AD1816A_FMT_LINEAR_16_BIG	0x30
+#define AD1816A_FMT_ALL			0x38
+#define AD1816A_FMT_STEREO		0x04
+
+#define AD1816A_PLAYBACK_IRQ_ENABLE	0x8000
+#define AD1816A_CAPTURE_IRQ_ENABLE	0x4000
+#define AD1816A_TIMER_IRQ_ENABLE	0x2000
+#define AD1816A_TIMER_ENABLE		0x0080
+
+#define AD1816A_SRC_LINE		0x00
+#define AD1816A_SRC_OUT			0x10
+#define AD1816A_SRC_CD			0x20
+#define AD1816A_SRC_SYNTH		0x30
+#define AD1816A_SRC_VIDEO		0x40
+#define AD1816A_SRC_MIC			0x50
+#define AD1816A_SRC_MONO		0x50
+#define AD1816A_SRC_PHONE_IN		0x60
+#define AD1816A_SRC_MASK		0x70
+
+#define AD1816A_CAPTURE_NOT_EQUAL	0x1000
+#define AD1816A_WSS_ENABLE		0x8000
+
+struct snd_ad1816a {
+	unsigned long port;
+	struct resource *res_port;
+	int irq;
+	int dma1;
+	int dma2;
+
+	unsigned short hardware;
+	unsigned short version;
+
+	spinlock_t lock;
+
+	unsigned short mode;
+	unsigned int clock_freq;
+
+	struct snd_card *card;
+	struct snd_pcm *pcm;
+
+	struct snd_pcm_substream *playback_substream;
+	struct snd_pcm_substream *capture_substream;
+	unsigned int p_dma_size;
+	unsigned int c_dma_size;
+
+	struct snd_timer *timer;
+};
+
+
+#define AD1816A_HW_AUTO		0
+#define AD1816A_HW_AD1816A	1
+#define AD1816A_HW_AD1815	2
+#define AD1816A_HW_AD18MAX10	3
+
+#define AD1816A_MODE_PLAYBACK	0x01
+#define AD1816A_MODE_CAPTURE	0x02
+#define AD1816A_MODE_TIMER	0x04
+#define AD1816A_MODE_OPEN	(AD1816A_MODE_PLAYBACK |	\
+				AD1816A_MODE_CAPTURE |		\
+				AD1816A_MODE_TIMER)
+
+
+extern int snd_ad1816a_create(struct snd_card *card, unsigned long port,
+			      int irq, int dma1, int dma2,
+			      struct snd_ad1816a **chip);
+
+extern int snd_ad1816a_pcm(struct snd_ad1816a *chip, int device, struct snd_pcm **rpcm);
+extern int snd_ad1816a_mixer(struct snd_ad1816a *chip);
+extern int snd_ad1816a_timer(struct snd_ad1816a *chip, int device,
+			     struct snd_timer **rtimer);
+
+#endif	/* __SOUND_AD1816A_H */
diff --git a/include/sound/ad1843.h b/include/sound/ad1843.h
new file mode 100644
index 00000000..b236a9d1
--- /dev/null
+++ b/include/sound/ad1843.h
@@ -0,0 +1,46 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 2003 Vivien Chappelier <vivien.chappelier@linux-mips.org>
+ * Copyright 2008 Thomas Bogendoerfer <tsbogend@franken.de>
+ */
+
+#ifndef __SOUND_AD1843_H
+#define __SOUND_AD1843_H
+
+struct snd_ad1843 {
+	void *chip;
+	int (*read)(void *chip, int reg);
+	int (*write)(void *chip, int reg, int val);
+};
+
+#define AD1843_GAIN_RECLEV 0
+#define AD1843_GAIN_LINE   1
+#define AD1843_GAIN_LINE_2 2
+#define AD1843_GAIN_MIC    3
+#define AD1843_GAIN_PCM_0  4
+#define AD1843_GAIN_PCM_1  5
+#define AD1843_GAIN_SIZE   (AD1843_GAIN_PCM_1+1)
+
+int ad1843_get_gain_max(struct snd_ad1843 *ad1843, int id);
+int ad1843_get_gain(struct snd_ad1843 *ad1843, int id);
+int ad1843_set_gain(struct snd_ad1843 *ad1843, int id, int newval);
+int ad1843_get_recsrc(struct snd_ad1843 *ad1843);
+int ad1843_set_recsrc(struct snd_ad1843 *ad1843, int newsrc);
+void ad1843_setup_dac(struct snd_ad1843 *ad1843,
+		      unsigned int id,
+		      unsigned int framerate,
+		      snd_pcm_format_t fmt,
+		      unsigned int channels);
+void ad1843_shutdown_dac(struct snd_ad1843 *ad1843,
+			 unsigned int id);
+void ad1843_setup_adc(struct snd_ad1843 *ad1843,
+		      unsigned int framerate,
+		      snd_pcm_format_t fmt,
+		      unsigned int channels);
+void ad1843_shutdown_adc(struct snd_ad1843 *ad1843);
+int ad1843_init(struct snd_ad1843 *ad1843);
+
+#endif /* __SOUND_AD1843_H */
diff --git a/include/sound/adau1373.h b/include/sound/adau1373.h
new file mode 100644
index 00000000..1b19c766
--- /dev/null
+++ b/include/sound/adau1373.h
@@ -0,0 +1,34 @@
+/*
+ * Analog Devices ADAU1373 Audio Codec drive
+ *
+ * Copyright 2011 Analog Devices Inc.
+ * Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __SOUND_ADAU1373_H__
+#define __SOUND_ADAU1373_H__
+
+enum adau1373_micbias_voltage {
+	ADAU1373_MICBIAS_2_9V = 0,
+	ADAU1373_MICBIAS_2_2V = 1,
+	ADAU1373_MICBIAS_2_6V = 2,
+	ADAU1373_MICBIAS_1_8V = 3,
+};
+
+#define ADAU1373_DRC_SIZE 13
+
+struct adau1373_platform_data {
+	bool input_differential[4];
+	bool lineout_differential;
+	bool lineout_ground_sense;
+
+	unsigned int num_drc;
+	uint8_t drc_setting[3][ADAU1373_DRC_SIZE];
+
+	enum adau1373_micbias_voltage micbias1;
+	enum adau1373_micbias_voltage micbias2;
+};
+
+#endif
diff --git a/include/sound/ak4113.h b/include/sound/ak4113.h
new file mode 100644
index 00000000..2609048c
--- /dev/null
+++ b/include/sound/ak4113.h
@@ -0,0 +1,321 @@
+#ifndef __SOUND_AK4113_H
+#define __SOUND_AK4113_H
+
+/*
+ *  Routines for Asahi Kasei AK4113
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>,
+ *  Copyright (c) by Pavel Hofman <pavel.hofman@ivitera.com>,
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+/* AK4113 registers */
+/* power down */
+#define AK4113_REG_PWRDN	0x00
+/* format control */
+#define AK4113_REG_FORMAT	0x01
+/* input/output control */
+#define AK4113_REG_IO0		0x02
+/* input/output control */
+#define AK4113_REG_IO1		0x03
+/* interrupt0 mask */
+#define AK4113_REG_INT0_MASK	0x04
+/* interrupt1 mask */
+#define AK4113_REG_INT1_MASK	0x05
+/* DAT mask & DTS select */
+#define AK4113_REG_DATDTS	0x06
+/* receiver status 0 */
+#define AK4113_REG_RCS0		0x07
+/* receiver status 1 */
+#define AK4113_REG_RCS1		0x08
+/* receiver status 2 */
+#define AK4113_REG_RCS2		0x09
+/* RX channel status byte 0 */
+#define AK4113_REG_RXCSB0	0x0a
+/* RX channel status byte 1 */
+#define AK4113_REG_RXCSB1	0x0b
+/* RX channel status byte 2 */
+#define AK4113_REG_RXCSB2	0x0c
+/* RX channel status byte 3 */
+#define AK4113_REG_RXCSB3	0x0d
+/* RX channel status byte 4 */
+#define AK4113_REG_RXCSB4	0x0e
+/* burst preamble Pc byte 0 */
+#define AK4113_REG_Pc0		0x0f
+/* burst preamble Pc byte 1 */
+#define AK4113_REG_Pc1		0x10
+/* burst preamble Pd byte 0 */
+#define AK4113_REG_Pd0		0x11
+/* burst preamble Pd byte 1 */
+#define AK4113_REG_Pd1		0x12
+/* Q-subcode address + control */
+#define AK4113_REG_QSUB_ADDR	0x13
+/* Q-subcode track */
+#define AK4113_REG_QSUB_TRACK	0x14
+/* Q-subcode index */
+#define AK4113_REG_QSUB_INDEX	0x15
+/* Q-subcode minute */
+#define AK4113_REG_QSUB_MINUTE	0x16
+/* Q-subcode second */
+#define AK4113_REG_QSUB_SECOND	0x17
+/* Q-subcode frame */
+#define AK4113_REG_QSUB_FRAME	0x18
+/* Q-subcode zero */
+#define AK4113_REG_QSUB_ZERO	0x19
+/* Q-subcode absolute minute */
+#define AK4113_REG_QSUB_ABSMIN	0x1a
+/* Q-subcode absolute second */
+#define AK4113_REG_QSUB_ABSSEC	0x1b
+/* Q-subcode absolute frame */
+#define AK4113_REG_QSUB_ABSFRM	0x1c
+
+/* sizes */
+#define AK4113_REG_RXCSB_SIZE	((AK4113_REG_RXCSB4-AK4113_REG_RXCSB0)+1)
+#define AK4113_REG_QSUB_SIZE	((AK4113_REG_QSUB_ABSFRM-AK4113_REG_QSUB_ADDR)\
+		+1)
+
+#define AK4113_WRITABLE_REGS	(AK4113_REG_DATDTS + 1)
+
+/* AK4113_REG_PWRDN bits */
+/* Channel Status Select */
+#define AK4113_CS12		(1<<7)
+/* Block Start & C/U Output Mode */
+#define AK4113_BCU		(1<<6)
+/* Master Clock Operation Select */
+#define AK4113_CM1		(1<<5)
+/* Master Clock Operation Select */
+#define AK4113_CM0		(1<<4)
+/* Master Clock Frequency Select */
+#define AK4113_OCKS1		(1<<3)
+/* Master Clock Frequency Select */
+#define AK4113_OCKS0		(1<<2)
+/* 0 = power down, 1 = normal operation */
+#define AK4113_PWN		(1<<1)
+/* 0 = reset & initialize (except thisregister), 1 = normal operation */
+#define AK4113_RST		(1<<0)
+
+/* AK4113_REQ_FORMAT bits */
+/* V/TX Output select: 0 = Validity Flag Output, 1 = TX */
+#define AK4113_VTX		(1<<7)
+/* Audio Data Control */
+#define AK4113_DIF2		(1<<6)
+/* Audio Data Control */
+#define AK4113_DIF1		(1<<5)
+/* Audio Data Control */
+#define AK4113_DIF0		(1<<4)
+/* Deemphasis Autodetect Enable (1 = enable) */
+#define AK4113_DEAU		(1<<3)
+/* 32kHz-48kHz Deemphasis Control */
+#define AK4113_DEM1		(1<<2)
+/* 32kHz-48kHz Deemphasis Control */
+#define AK4113_DEM0		(1<<1)
+#define AK4113_DEM_OFF		(AK4113_DEM0)
+#define AK4113_DEM_44KHZ	(0)
+#define AK4113_DEM_48KHZ	(AK4113_DEM1)
+#define AK4113_DEM_32KHZ	(AK4113_DEM0|AK4113_DEM1)
+/* STDO: 16-bit, right justified */
+#define AK4113_DIF_16R		(0)
+/* STDO: 18-bit, right justified */
+#define AK4113_DIF_18R		(AK4113_DIF0)
+/* STDO: 20-bit, right justified */
+#define AK4113_DIF_20R		(AK4113_DIF1)
+/* STDO: 24-bit, right justified */
+#define AK4113_DIF_24R		(AK4113_DIF1|AK4113_DIF0)
+/* STDO: 24-bit, left justified */
+#define AK4113_DIF_24L		(AK4113_DIF2)
+/* STDO: I2S */
+#define AK4113_DIF_24I2S	(AK4113_DIF2|AK4113_DIF0)
+/* STDO: 24-bit, left justified; LRCLK, BICK = Input */
+#define AK4113_DIF_I24L		(AK4113_DIF2|AK4113_DIF1)
+/* STDO: I2S;  LRCLK, BICK = Input */
+#define AK4113_DIF_I24I2S	(AK4113_DIF2|AK4113_DIF1|AK4113_DIF0)
+
+/* AK4113_REG_IO0 */
+/* XTL1=0,XTL0=0 -> 11.2896Mhz; XTL1=0,XTL0=1 -> 12.288Mhz */
+#define AK4113_XTL1		(1<<6)
+/* XTL1=1,XTL0=0 -> 24.576Mhz; XTL1=1,XTL0=1 -> use channel status */
+#define AK4113_XTL0		(1<<5)
+/* Block Start Signal Output: 0 = U-bit, 1 = C-bit (req. BCU = 1) */
+#define AK4113_UCE		(1<<4)
+/* TX Output Enable (1 = enable) */
+#define AK4113_TXE		(1<<3)
+/* Output Through Data Selector for TX pin */
+#define AK4113_OPS2		(1<<2)
+/* Output Through Data Selector for TX pin */
+#define AK4113_OPS1		(1<<1)
+/* Output Through Data Selector for TX pin */
+#define AK4113_OPS0		(1<<0)
+/* 11.2896 MHz ref. Xtal freq. */
+#define AK4113_XTL_11_2896M	(0)
+/* 12.288 MHz ref. Xtal freq. */
+#define AK4113_XTL_12_288M	(AK4113_XTL0)
+/* 24.576 MHz ref. Xtal freq. */
+#define AK4113_XTL_24_576M	(AK4113_XTL1)
+
+/* AK4113_REG_IO1 */
+/* Interrupt 0 pin Hold */
+#define AK4113_EFH1		(1<<7)
+/* Interrupt 0 pin Hold */
+#define AK4113_EFH0		(1<<6)
+#define AK4113_EFH_512LRCLK	(0)
+#define AK4113_EFH_1024LRCLK	(AK4113_EFH0)
+#define AK4113_EFH_2048LRCLK	(AK4113_EFH1)
+#define AK4113_EFH_4096LRCLK	(AK4113_EFH1|AK4113_EFH0)
+/* PLL Lock Time: 0 = 384/fs, 1 = 1/fs */
+#define AK4113_FAST		(1<<5)
+/* MCKO2 Output Select: 0 = CMx/OCKSx, 1 = Xtal */
+#define AK4113_XMCK		(1<<4)
+/* MCKO2 Output Freq. Select: 0 = x1, 1 = x0.5  (req. XMCK = 1) */
+#define AK4113_DIV		(1<<3)
+/* Input Recovery Data Select */
+#define AK4113_IPS2		(1<<2)
+/* Input Recovery Data Select */
+#define AK4113_IPS1		(1<<1)
+/* Input Recovery Data Select */
+#define AK4113_IPS0		(1<<0)
+#define AK4113_IPS(x)		((x)&7)
+
+/* AK4113_REG_INT0_MASK && AK4113_REG_INT1_MASK*/
+/* mask enable for QINT bit */
+#define AK4113_MQI		(1<<7)
+/* mask enable for AUTO bit */
+#define AK4113_MAUT		(1<<6)
+/* mask enable for CINT bit */
+#define AK4113_MCIT		(1<<5)
+/* mask enable for UNLOCK bit */
+#define AK4113_MULK		(1<<4)
+/* mask enable for V bit */
+#define AK4113_V		(1<<3)
+/* mask enable for STC bit */
+#define AK4113_STC		(1<<2)
+/* mask enable for AUDN bit */
+#define AK4113_MAN		(1<<1)
+/* mask enable for PAR bit */
+#define AK4113_MPR		(1<<0)
+
+/* AK4113_REG_DATDTS */
+/* DAT Start ID Counter */
+#define AK4113_DCNT		(1<<4)
+/* DTS-CD 16-bit Sync Word Detect */
+#define AK4113_DTS16		(1<<3)
+/* DTS-CD 14-bit Sync Word Detect */
+#define AK4113_DTS14		(1<<2)
+/* mask enable for DAT bit (if 1, no INT1 effect */
+#define AK4113_MDAT1		(1<<1)
+/* mask enable for DAT bit (if 1, no INT0 effect */
+#define AK4113_MDAT0		(1<<0)
+
+/* AK4113_REG_RCS0 */
+/* Q-subcode buffer interrupt, 0 = no change, 1 = changed */
+#define AK4113_QINT		(1<<7)
+/* Non-PCM or DTS stream auto detection, 0 = no detect, 1 = detect */
+#define AK4113_AUTO		(1<<6)
+/* channel status buffer interrupt, 0 = no change, 1 = change */
+#define AK4113_CINT		(1<<5)
+/* PLL lock status, 0 = lock, 1 = unlock */
+#define AK4113_UNLCK		(1<<4)
+/* Validity bit, 0 = valid, 1 = invalid */
+#define AK4113_V		(1<<3)
+/* sampling frequency or Pre-emphasis change, 0 = no detect, 1 = detect */
+#define AK4113_STC		(1<<2)
+/* audio bit output, 0 = audio, 1 = non-audio */
+#define AK4113_AUDION		(1<<1)
+/* parity error or biphase error status, 0 = no error, 1 = error */
+#define AK4113_PAR		(1<<0)
+
+/* AK4113_REG_RCS1 */
+/* sampling frequency detection */
+#define AK4113_FS3		(1<<7)
+#define AK4113_FS2		(1<<6)
+#define AK4113_FS1		(1<<5)
+#define AK4113_FS0		(1<<4)
+/* Pre-emphasis detect, 0 = OFF, 1 = ON */
+#define AK4113_PEM		(1<<3)
+/* DAT Start ID Detect, 0 = no detect, 1 = detect */
+#define AK4113_DAT		(1<<2)
+/* DTS-CD bit audio stream detect, 0 = no detect, 1 = detect */
+#define AK4113_DTSCD		(1<<1)
+/* Non-PCM bit stream detection, 0 = no detect, 1 = detect */
+#define AK4113_NPCM		(1<<0)
+#define AK4113_FS_8000HZ	(AK4113_FS3|AK4113_FS0)
+#define AK4113_FS_11025HZ	(AK4113_FS2|AK4113_FS0)
+#define AK4113_FS_16000HZ	(AK4113_FS2|AK4113_FS1|AK4113_FS0)
+#define AK4113_FS_22050HZ	(AK4113_FS2)
+#define AK4113_FS_24000HZ	(AK4113_FS2|AK4113_FS1)
+#define AK4113_FS_32000HZ	(AK4113_FS1|AK4113_FS0)
+#define AK4113_FS_44100HZ	(0)
+#define AK4113_FS_48000HZ	(AK4113_FS1)
+#define AK4113_FS_64000HZ	(AK4113_FS3|AK4113_FS1|AK4113_FS0)
+#define AK4113_FS_88200HZ	(AK4113_FS3)
+#define AK4113_FS_96000HZ	(AK4113_FS3|AK4113_FS1)
+#define AK4113_FS_176400HZ	(AK4113_FS3|AK4113_FS2)
+#define AK4113_FS_192000HZ	(AK4113_FS3|AK4113_FS2|AK4113_FS1)
+
+/* AK4113_REG_RCS2 */
+/* CRC for Q-subcode, 0 = no error, 1 = error */
+#define AK4113_QCRC		(1<<1)
+/* CRC for channel status, 0 = no error, 1 = error */
+#define AK4113_CCRC		(1<<0)
+
+/* flags for snd_ak4113_check_rate_and_errors() */
+#define AK4113_CHECK_NO_STAT	(1<<0)	/* no statistics */
+#define AK4113_CHECK_NO_RATE	(1<<1)	/* no rate check */
+
+#define AK4113_CONTROLS		13
+
+typedef void (ak4113_write_t)(void *private_data, unsigned char addr,
+		unsigned char data);
+typedef unsigned char (ak4113_read_t)(void *private_data, unsigned char addr);
+
+struct ak4113 {
+	struct snd_card *card;
+	ak4113_write_t *write;
+	ak4113_read_t *read;
+	void *private_data;
+	unsigned int init:1;
+	spinlock_t lock;
+	unsigned char regmap[AK4113_WRITABLE_REGS];
+	struct snd_kcontrol *kctls[AK4113_CONTROLS];
+	struct snd_pcm_substream *substream;
+	unsigned long parity_errors;
+	unsigned long v_bit_errors;
+	unsigned long qcrc_errors;
+	unsigned long ccrc_errors;
+	unsigned char rcs0;
+	unsigned char rcs1;
+	unsigned char rcs2;
+	struct delayed_work work;
+	unsigned int check_flags;
+	void *change_callback_private;
+	void (*change_callback)(struct ak4113 *ak4113, unsigned char c0,
+			unsigned char c1);
+};
+
+int snd_ak4113_create(struct snd_card *card, ak4113_read_t *read,
+		ak4113_write_t *write,
+		const unsigned char *pgm,
+		void *private_data, struct ak4113 **r_ak4113);
+void snd_ak4113_reg_write(struct ak4113 *ak4113, unsigned char reg,
+		unsigned char mask, unsigned char val);
+void snd_ak4113_reinit(struct ak4113 *ak4113);
+int snd_ak4113_build(struct ak4113 *ak4113,
+		struct snd_pcm_substream *capture_substream);
+int snd_ak4113_external_rate(struct ak4113 *ak4113);
+int snd_ak4113_check_rate_and_errors(struct ak4113 *ak4113, unsigned int flags);
+
+#endif /* __SOUND_AK4113_H */
+
diff --git a/include/sound/ak4114.h b/include/sound/ak4114.h
new file mode 100644
index 00000000..3ce69fd9
--- /dev/null
+++ b/include/sound/ak4114.h
@@ -0,0 +1,203 @@
+#ifndef __SOUND_AK4114_H
+#define __SOUND_AK4114_H
+
+/*
+ *  Routines for Asahi Kasei AK4114
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>,
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+/* AK4114 registers */
+#define AK4114_REG_PWRDN	0x00	/* power down */
+#define AK4114_REG_FORMAT	0x01	/* format control */
+#define AK4114_REG_IO0		0x02	/* input/output control */
+#define AK4114_REG_IO1		0x03	/* input/output control */
+#define AK4114_REG_INT0_MASK	0x04	/* interrupt0 mask */
+#define AK4114_REG_INT1_MASK	0x05	/* interrupt1 mask */
+#define AK4114_REG_RCS0		0x06	/* receiver status 0 */
+#define AK4114_REG_RCS1		0x07	/* receiver status 1 */
+#define AK4114_REG_RXCSB0	0x08	/* RX channel status byte 0 */
+#define AK4114_REG_RXCSB1	0x09	/* RX channel status byte 1 */
+#define AK4114_REG_RXCSB2	0x0a	/* RX channel status byte 2 */
+#define AK4114_REG_RXCSB3	0x0b	/* RX channel status byte 3 */
+#define AK4114_REG_RXCSB4	0x0c	/* RX channel status byte 4 */
+#define AK4114_REG_TXCSB0	0x0d	/* TX channel status byte 0 */
+#define AK4114_REG_TXCSB1	0x0e	/* TX channel status byte 1 */
+#define AK4114_REG_TXCSB2	0x0f	/* TX channel status byte 2 */
+#define AK4114_REG_TXCSB3	0x10	/* TX channel status byte 3 */
+#define AK4114_REG_TXCSB4	0x11	/* TX channel status byte 4 */
+#define AK4114_REG_Pc0		0x12	/* burst preamble Pc byte 0 */
+#define AK4114_REG_Pc1		0x13	/* burst preamble Pc byte 1 */
+#define AK4114_REG_Pd0		0x14	/* burst preamble Pd byte 0 */
+#define AK4114_REG_Pd1		0x15	/* burst preamble Pd byte 1 */
+#define AK4114_REG_QSUB_ADDR	0x16	/* Q-subcode address + control */
+#define AK4114_REG_QSUB_TRACK	0x17	/* Q-subcode track */
+#define AK4114_REG_QSUB_INDEX	0x18	/* Q-subcode index */
+#define AK4114_REG_QSUB_MINUTE	0x19	/* Q-subcode minute */
+#define AK4114_REG_QSUB_SECOND	0x1a	/* Q-subcode second */
+#define AK4114_REG_QSUB_FRAME	0x1b	/* Q-subcode frame */
+#define AK4114_REG_QSUB_ZERO	0x1c	/* Q-subcode zero */
+#define AK4114_REG_QSUB_ABSMIN	0x1d	/* Q-subcode absolute minute */
+#define AK4114_REG_QSUB_ABSSEC	0x1e	/* Q-subcode absolute second */
+#define AK4114_REG_QSUB_ABSFRM	0x1f	/* Q-subcode absolute frame */
+
+/* sizes */
+#define AK4114_REG_RXCSB_SIZE	((AK4114_REG_RXCSB4-AK4114_REG_RXCSB0)+1)
+#define AK4114_REG_TXCSB_SIZE	((AK4114_REG_TXCSB4-AK4114_REG_TXCSB0)+1)
+#define AK4114_REG_QSUB_SIZE	((AK4114_REG_QSUB_ABSFRM-AK4114_REG_QSUB_ADDR)+1)
+
+/* AK4117_REG_PWRDN bits */
+#define AK4114_CS12		(1<<7)	/* Channel Status Select */
+#define AK4114_BCU		(1<<6)	/* Block Start & C/U Output Mode */
+#define AK4114_CM1		(1<<5)	/* Master Clock Operation Select */
+#define AK4114_CM0		(1<<4)	/* Master Clock Operation Select */
+#define AK4114_OCKS1		(1<<3)	/* Master Clock Frequency Select */
+#define AK4114_OCKS0		(1<<2)	/* Master Clock Frequency Select */
+#define AK4114_PWN		(1<<1)	/* 0 = power down, 1 = normal operation */
+#define AK4114_RST		(1<<0)	/* 0 = reset & initialize (except this register), 1 = normal operation */
+
+/* AK4114_REQ_FORMAT bits */
+#define AK4114_MONO		(1<<7)	/* Double Sampling Frequency Mode: 0 = stereo, 1 = mono */
+#define AK4114_DIF2		(1<<6)	/* Audio Data Control */
+#define AK4114_DIF1		(1<<5)	/* Audio Data Control */
+#define AK4114_DIF0		(1<<4)	/* Audio Data Control */
+#define AK4114_DIF_16R		(0)				/* STDO: 16-bit, right justified */
+#define AK4114_DIF_18R		(AK4114_DIF0)			/* STDO: 18-bit, right justified */
+#define AK4114_DIF_20R		(AK4114_DIF1)			/* STDO: 20-bit, right justified */
+#define AK4114_DIF_24R		(AK4114_DIF1|AK4114_DIF0)	/* STDO: 24-bit, right justified */
+#define AK4114_DIF_24L		(AK4114_DIF2)			/* STDO: 24-bit, left justified */
+#define AK4114_DIF_24I2S	(AK4114_DIF2|AK4114_DIF0)	/* STDO: I2S */
+#define AK4114_DIF_I24L		(AK4114_DIF2|AK4114_DIF1)	/* STDO: 24-bit, left justified; LRCLK, BICK = Input */
+#define AK4114_DIF_I24I2S	(AK4114_DIF2|AK4114_DIF1|AK4114_DIF0) /* STDO: I2S;  LRCLK, BICK = Input */
+#define AK4114_DEAU		(1<<3)	/* Deemphasis Autodetect Enable (1 = enable) */
+#define AK4114_DEM1		(1<<2)	/* 32kHz-48kHz Deemphasis Control */
+#define AK4114_DEM0		(1<<1)	/* 32kHz-48kHz Deemphasis Control */
+#define AK4114_DEM_44KHZ	(0)
+#define AK4114_DEM_48KHZ	(AK4114_DEM1)
+#define AK4114_DEM_32KHZ	(AK4114_DEM0|AK4114_DEM1)
+#define AK4114_DEM_96KHZ	(AK4114_DEM1)	/* DFS must be set */
+#define AK4114_DFS		(1<<0)	/* 96kHz Deemphasis Control */
+
+/* AK4114_REG_IO0 */
+#define AK4114_TX1E		(1<<7)	/* TX1 Output Enable (1 = enable) */
+#define AK4114_OPS12		(1<<6)	/* Output Data Selector for TX1 pin */
+#define AK4114_OPS11		(1<<5)	/* Output Data Selector for TX1 pin */
+#define AK4114_OPS10		(1<<4)	/* Output Data Selector for TX1 pin */
+#define AK4114_TX0E		(1<<3)	/* TX0 Output Enable (1 = enable) */
+#define AK4114_OPS02		(1<<2)	/* Output Data Selector for TX0 pin */
+#define AK4114_OPS01		(1<<1)	/* Output Data Selector for TX0 pin */
+#define AK4114_OPS00		(1<<0)	/* Output Data Selector for TX0 pin */
+
+/* AK4114_REG_IO1 */
+#define AK4114_EFH1		(1<<7)	/* Interrupt 0 pin Hold */
+#define AK4114_EFH0		(1<<6)	/* Interrupt 0 pin Hold */
+#define AK4114_EFH_512		(0)
+#define AK4114_EFH_1024		(AK4114_EFH0)
+#define AK4114_EFH_2048		(AK4114_EFH1)
+#define AK4114_EFH_4096		(AK4114_EFH1|AK4114_EFH0)
+#define AK4114_UDIT		(1<<5)	/* U-bit Control for DIT (0 = fixed '0', 1 = recovered) */
+#define AK4114_TLR		(1<<4)	/* Double Sampling Frequency Select for DIT (0 = L channel, 1 = R channel) */
+#define AK4114_DIT		(1<<3)	/* TX1 out: 0 = Through Data (RX data), 1 = Transmit Data (DAUX data) */
+#define AK4114_IPS2		(1<<2)	/* Input Recovery Data Select */
+#define AK4114_IPS1		(1<<1)	/* Input Recovery Data Select */
+#define AK4114_IPS0		(1<<0)	/* Input Recovery Data Select */
+#define AK4114_IPS(x)		((x)&7)
+
+/* AK4114_REG_INT0_MASK && AK4114_REG_INT1_MASK*/
+#define AK4117_MQI              (1<<7)  /* mask enable for QINT bit */
+#define AK4117_MAT              (1<<6)  /* mask enable for AUTO bit */
+#define AK4117_MCI              (1<<5)  /* mask enable for CINT bit */
+#define AK4117_MUL              (1<<4)  /* mask enable for UNLOCK bit */
+#define AK4117_MDTS             (1<<3)  /* mask enable for DTSCD bit */
+#define AK4117_MPE              (1<<2)  /* mask enable for PEM bit */
+#define AK4117_MAN              (1<<1)  /* mask enable for AUDN bit */
+#define AK4117_MPR              (1<<0)  /* mask enable for PAR bit */
+
+/* AK4114_REG_RCS0 */
+#define AK4114_QINT		(1<<7)	/* Q-subcode buffer interrupt, 0 = no change, 1 = changed */
+#define AK4114_AUTO		(1<<6)	/* Non-PCM or DTS stream auto detection, 0 = no detect, 1 = detect */
+#define AK4114_CINT		(1<<5)	/* channel status buffer interrupt, 0 = no change, 1 = change */
+#define AK4114_UNLCK		(1<<4)	/* PLL lock status, 0 = lock, 1 = unlock */
+#define AK4114_DTSCD		(1<<3)	/* DTS-CD Detect, 0 = No detect, 1 = Detect */
+#define AK4114_PEM		(1<<2)	/* Pre-emphasis Detect, 0 = OFF, 1 = ON */
+#define AK4114_AUDION		(1<<1)	/* audio bit output, 0 = audio, 1 = non-audio */
+#define AK4114_PAR		(1<<0)	/* parity error or biphase error status, 0 = no error, 1 = error */
+
+/* AK4114_REG_RCS1 */
+#define AK4114_FS3		(1<<7)	/* sampling frequency detection */
+#define AK4114_FS2		(1<<6)
+#define AK4114_FS1		(1<<5)
+#define AK4114_FS0		(1<<4)
+#define AK4114_FS_44100HZ	(0)
+#define AK4114_FS_48000HZ	(AK4114_FS1)
+#define AK4114_FS_32000HZ	(AK4114_FS1|AK4114_FS0)
+#define AK4114_FS_88200HZ	(AK4114_FS3)
+#define AK4114_FS_96000HZ	(AK4114_FS3|AK4114_FS1)
+#define AK4114_FS_176400HZ	(AK4114_FS3|AK4114_FS2)
+#define AK4114_FS_192000HZ	(AK4114_FS3|AK4114_FS2|AK4114_FS1)
+#define AK4114_V		(1<<3)	/* Validity of Channel Status, 0 = Valid, 1 = Invalid */
+#define AK4114_QCRC		(1<<1)	/* CRC for Q-subcode, 0 = no error, 1 = error */
+#define AK4114_CCRC		(1<<0)	/* CRC for channel status, 0 = no error, 1 = error */
+
+/* flags for snd_ak4114_check_rate_and_errors() */
+#define AK4114_CHECK_NO_STAT	(1<<0)	/* no statistics */
+#define AK4114_CHECK_NO_RATE	(1<<1)	/* no rate check */
+
+#define AK4114_CONTROLS		15
+
+typedef void (ak4114_write_t)(void *private_data, unsigned char addr, unsigned char data);
+typedef unsigned char (ak4114_read_t)(void *private_data, unsigned char addr);
+
+struct ak4114 {
+	struct snd_card *card;
+	ak4114_write_t * write;
+	ak4114_read_t * read;
+	void * private_data;
+	unsigned int init: 1;
+	spinlock_t lock;
+	unsigned char regmap[7];
+	unsigned char txcsb[5];
+	struct snd_kcontrol *kctls[AK4114_CONTROLS];
+	struct snd_pcm_substream *playback_substream;
+	struct snd_pcm_substream *capture_substream;
+	unsigned long parity_errors;
+	unsigned long v_bit_errors;
+	unsigned long qcrc_errors;
+	unsigned long ccrc_errors;
+	unsigned char rcs0;
+	unsigned char rcs1;
+	struct delayed_work work;
+	unsigned int check_flags;
+	void *change_callback_private;
+	void (*change_callback)(struct ak4114 *ak4114, unsigned char c0, unsigned char c1);
+};
+
+int snd_ak4114_create(struct snd_card *card,
+		      ak4114_read_t *read, ak4114_write_t *write,
+		      const unsigned char pgm[7], const unsigned char txcsb[5],
+		      void *private_data, struct ak4114 **r_ak4114);
+void snd_ak4114_reg_write(struct ak4114 *ak4114, unsigned char reg, unsigned char mask, unsigned char val);
+void snd_ak4114_reinit(struct ak4114 *ak4114);
+int snd_ak4114_build(struct ak4114 *ak4114,
+		     struct snd_pcm_substream *playback_substream,
+                     struct snd_pcm_substream *capture_substream);
+int snd_ak4114_external_rate(struct ak4114 *ak4114);
+int snd_ak4114_check_rate_and_errors(struct ak4114 *ak4114, unsigned int flags);
+
+#endif /* __SOUND_AK4114_H */
+
diff --git a/include/sound/ak4117.h b/include/sound/ak4117.h
new file mode 100644
index 00000000..1e817817
--- /dev/null
+++ b/include/sound/ak4117.h
@@ -0,0 +1,189 @@
+#ifndef __SOUND_AK4117_H
+#define __SOUND_AK4117_H
+
+/*
+ *  Routines for Asahi Kasei AK4117
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>,
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#define AK4117_REG_PWRDN	0x00	/* power down */
+#define AK4117_REG_CLOCK	0x01	/* clock control */
+#define AK4117_REG_IO		0x02	/* input/output control */
+#define AK4117_REG_INT0_MASK	0x03	/* interrupt0 mask */
+#define AK4117_REG_INT1_MASK	0x04	/* interrupt1 mask */
+#define AK4117_REG_RCS0		0x05	/* receiver status 0 */
+#define AK4117_REG_RCS1		0x06	/* receiver status 1 */
+#define AK4117_REG_RCS2		0x07	/* receiver status 2 */
+#define AK4117_REG_RXCSB0	0x08	/* RX channel status byte 0 */
+#define AK4117_REG_RXCSB1	0x09	/* RX channel status byte 1 */
+#define AK4117_REG_RXCSB2	0x0a	/* RX channel status byte 2 */
+#define AK4117_REG_RXCSB3	0x0b	/* RX channel status byte 3 */
+#define AK4117_REG_RXCSB4	0x0c	/* RX channel status byte 4 */
+#define AK4117_REG_Pc0		0x0d	/* burst preamble Pc byte 0 */
+#define AK4117_REG_Pc1		0x0e	/* burst preamble Pc byte 1 */
+#define AK4117_REG_Pd0		0x0f	/* burst preamble Pd byte 0 */
+#define AK4117_REG_Pd1		0x10	/* burst preamble Pd byte 1 */
+#define AK4117_REG_QSUB_ADDR	0x11	/* Q-subcode address + control */
+#define AK4117_REG_QSUB_TRACK	0x12	/* Q-subcode track */
+#define AK4117_REG_QSUB_INDEX	0x13	/* Q-subcode index */
+#define AK4117_REG_QSUB_MINUTE	0x14	/* Q-subcode minute */
+#define AK4117_REG_QSUB_SECOND	0x15	/* Q-subcode second */
+#define AK4117_REG_QSUB_FRAME	0x16	/* Q-subcode frame */
+#define AK4117_REG_QSUB_ZERO	0x17	/* Q-subcode zero */
+#define AK4117_REG_QSUB_ABSMIN	0x18	/* Q-subcode absolute minute */
+#define AK4117_REG_QSUB_ABSSEC	0x19	/* Q-subcode absolute second */
+#define AK4117_REG_QSUB_ABSFRM	0x1a	/* Q-subcode absolute frame */
+
+/* sizes */
+#define AK4117_REG_RXCSB_SIZE	((AK4117_REG_RXCSB4-AK4117_REG_RXCSB0)+1)
+#define AK4117_REG_QSUB_SIZE	((AK4117_REG_QSUB_ABSFRM-AK4117_REG_QSUB_ADDR)+1)
+
+/* AK4117_REG_PWRDN bits */
+#define AK4117_EXCT		(1<<4)	/* 0 = X'tal mode, 1 = external clock mode */
+#define AK4117_XTL1		(1<<3)	/* XTL1=0,XTL0=0 -> 11.2896Mhz; XTL1=0,XTL0=1 -> 12.288Mhz */
+#define AK4117_XTL0		(1<<2)	/* XTL1=1,XTL0=0 -> 24.576Mhz; XTL1=1,XTL0=1 -> use channel status */
+#define AK4117_XTL_11_2896M	(0)
+#define AK4117_XTL_12_288M	AK4117_XTL0
+#define AK4117_XTL_24_576M	AK4117_XTL1
+#define AK4117_XTL_EXT		(AK4117_XTL1|AK4117_XTL0)
+#define AK4117_PWN		(1<<1)	/* 0 = power down, 1 = normal operation */
+#define AK4117_RST		(1<<0)	/* 0 = reset & initialize (except this register), 1 = normal operation */
+
+/* AK4117_REQ_CLOCK bits */
+#define AK4117_LP		(1<<7)	/* 0 = normal mode, 1 = low power mode (Fs up to 48kHz only) */
+#define AK4117_PKCS1		(1<<6)	/* master clock frequency at PLL mode (when LP == 0) */
+#define AK4117_PKCS0		(1<<5)
+#define AK4117_PKCS_512fs	(0)
+#define AK4117_PKCS_256fs	AK4117_PKCS0
+#define AK4117_PKCS_128fs	AK4117_PKCS1
+#define AK4117_DIV		(1<<4)	/* 0 = MCKO == Fs, 1 = MCKO == Fs / 2; X'tal mode only */
+#define AK4117_XCKS1		(1<<3)	/* master clock frequency at X'tal mode */
+#define AK4117_XCKS0		(1<<2)
+#define AK4117_XCKS_128fs	(0)
+#define AK4117_XCKS_256fs	AK4117_XCKS0
+#define AK4117_XCKS_512fs	AK4117_XCKS1
+#define AK4117_XCKS_1024fs	(AK4117_XCKS1|AK4117_XCKS0)
+#define AK4117_CM1		(1<<1)	/* MCKO operation mode select */
+#define AK4117_CM0		(1<<0)
+#define AK4117_CM_PLL		(0)		/* use RX input as master clock */
+#define AK4117_CM_XTAL		(AK4117_CM0)	/* use X'tal as master clock */
+#define AK4117_CM_PLL_XTAL	(AK4117_CM1)	/* use Rx input but X'tal when PLL loses lock */
+#define AK4117_CM_MONITOR	(AK4117_CM0|AK4117_CM1) /* use X'tal as master clock, but use PLL for monitoring */
+
+/* AK4117_REG_IO */
+#define AK4117_IPS		(1<<7)	/* Input Recovery Data Select, 0 = RX0, 1 = RX1 */
+#define AK4117_UOUTE		(1<<6)	/* U-bit output enable to UOUT, 0 = disable, 1 = enable */
+#define AK4117_CS12		(1<<5)	/* channel status select, 0 = channel1, 1 = channel2 */
+#define AK4117_EFH2		(1<<4)	/* INT0 pin hold count select */
+#define AK4117_EFH1		(1<<3)
+#define AK4117_EFH_512LRCLK	(0)
+#define AK4117_EFH_1024LRCLK	(AK4117_EFH1)
+#define AK4117_EFH_2048LRCLK	(AK4117_EFH2)
+#define AK4117_EFH_4096LRCLK	(AK4117_EFH1|AK4117_EFH2)
+#define AK4117_DIF2		(1<<2)	/* audio data format control */
+#define AK4117_DIF1		(1<<1)
+#define AK4117_DIF0		(1<<0)
+#define AK4117_DIF_16R		(0)				/* STDO: 16-bit, right justified */
+#define AK4117_DIF_18R		(AK4117_DIF0)			/* STDO: 18-bit, right justified */
+#define AK4117_DIF_20R		(AK4117_DIF1)			/* STDO: 20-bit, right justified */
+#define AK4117_DIF_24R		(AK4117_DIF1|AK4117_DIF0)	/* STDO: 24-bit, right justified */
+#define AK4117_DIF_24L		(AK4117_DIF2)			/* STDO: 24-bit, left justified */
+#define AK4117_DIF_24I2S	(AK4117_DIF2|AK4117_DIF0)	/* STDO: I2S */
+
+/* AK4117_REG_INT0_MASK & AK4117_REG_INT1_MASK */
+#define AK4117_MULK		(1<<7)	/* mask enable for UNLOCK bit */
+#define AK4117_MPAR		(1<<6)	/* mask enable for PAR bit */
+#define AK4117_MAUTO		(1<<5)	/* mask enable for AUTO bit */
+#define AK4117_MV		(1<<4)	/* mask enable for V bit */
+#define AK4117_MAUD		(1<<3)	/* mask enable for AUDION bit */
+#define AK4117_MSTC		(1<<2)	/* mask enable for STC bit */
+#define AK4117_MCIT		(1<<1)	/* mask enable for CINT bit */
+#define AK4117_MQIT		(1<<0)	/* mask enable for QINT bit */
+
+/* AK4117_REG_RCS0 */
+#define AK4117_UNLCK		(1<<7)	/* PLL lock status, 0 = lock, 1 = unlock */
+#define AK4117_PAR		(1<<6)	/* parity error or biphase error status, 0 = no error, 1 = error */
+#define AK4117_AUTO		(1<<5)	/* Non-PCM or DTS stream auto detection, 0 = no detect, 1 = detect */
+#define AK4117_V		(1<<4)	/* Validity bit, 0 = valid, 1 = invalid */
+#define AK4117_AUDION		(1<<3)	/* audio bit output, 0 = audio, 1 = non-audio */
+#define AK4117_STC		(1<<2)	/* sampling frequency or Pre-emphasis change, 0 = no detect, 1 = detect */
+#define AK4117_CINT		(1<<1)	/* channel status buffer interrupt, 0 = no change, 1 = change */
+#define AK4117_QINT		(1<<0)	/* Q-subcode buffer interrupt, 0 = no change, 1 = changed */
+
+/* AK4117_REG_RCS1 */
+#define AK4117_DTSCD		(1<<6)	/* DTS-CD bit audio stream detect, 0 = no detect, 1 = detect */
+#define AK4117_NPCM		(1<<5)	/* Non-PCM bit stream detection, 0 = no detect, 1 = detect */
+#define AK4117_PEM		(1<<4)	/* Pre-emphasis detect, 0 = OFF, 1 = ON */
+#define AK4117_FS3		(1<<3)	/* sampling frequency detection */
+#define AK4117_FS2		(1<<2)
+#define AK4117_FS1		(1<<1)
+#define AK4117_FS0		(1<<0)
+#define AK4117_FS_44100HZ	(0)
+#define AK4117_FS_48000HZ	(AK4117_FS1)
+#define AK4117_FS_32000HZ	(AK4117_FS1|AK4117_FS0)
+#define AK4117_FS_88200HZ	(AK4117_FS3)
+#define AK4117_FS_96000HZ	(AK4117_FS3|AK4117_FS1)
+#define AK4117_FS_176400HZ	(AK4117_FS3|AK4117_FS2)
+#define AK4117_FS_192000HZ	(AK4117_FS3|AK4117_FS2|AK4117_FS1)
+
+/* AK4117_REG_RCS2 */
+#define AK4117_CCRC		(1<<1)	/* CRC for channel status, 0 = no error, 1 = error */
+#define AK4117_QCRC		(1<<0)	/* CRC for Q-subcode, 0 = no error, 1 = error */
+
+/* flags for snd_ak4117_check_rate_and_errors() */
+#define AK4117_CHECK_NO_STAT	(1<<0)	/* no statistics */
+#define AK4117_CHECK_NO_RATE	(1<<1)	/* no rate check */
+
+#define AK4117_CONTROLS		13
+
+typedef void (ak4117_write_t)(void *private_data, unsigned char addr, unsigned char data);
+typedef unsigned char (ak4117_read_t)(void *private_data, unsigned char addr);
+
+struct ak4117 {
+	struct snd_card *card;
+	ak4117_write_t * write;
+	ak4117_read_t * read;
+	void * private_data;
+	unsigned int init: 1;
+	spinlock_t lock;
+	unsigned char regmap[5];
+	struct snd_kcontrol *kctls[AK4117_CONTROLS];
+	struct snd_pcm_substream *substream;
+	unsigned long parity_errors;
+	unsigned long v_bit_errors;
+	unsigned long qcrc_errors;
+	unsigned long ccrc_errors;
+	unsigned char rcs0;
+	unsigned char rcs1;
+	unsigned char rcs2;
+	struct timer_list timer;	/* statistic timer */
+	void *change_callback_private;
+	void (*change_callback)(struct ak4117 *ak4117, unsigned char c0, unsigned char c1);
+};
+
+int snd_ak4117_create(struct snd_card *card, ak4117_read_t *read, ak4117_write_t *write,
+		      const unsigned char pgm[5], void *private_data, struct ak4117 **r_ak4117);
+void snd_ak4117_reg_write(struct ak4117 *ak4117, unsigned char reg, unsigned char mask, unsigned char val);
+void snd_ak4117_reinit(struct ak4117 *ak4117);
+int snd_ak4117_build(struct ak4117 *ak4117, struct snd_pcm_substream *capture_substream);
+int snd_ak4117_external_rate(struct ak4117 *ak4117);
+int snd_ak4117_check_rate_and_errors(struct ak4117 *ak4117, unsigned int flags);
+
+#endif /* __SOUND_AK4117_H */
+
diff --git a/include/sound/ak4531_codec.h b/include/sound/ak4531_codec.h
new file mode 100644
index 00000000..575296cf
--- /dev/null
+++ b/include/sound/ak4531_codec.h
@@ -0,0 +1,85 @@
+#ifndef __SOUND_AK4531_CODEC_H
+#define __SOUND_AK4531_CODEC_H
+
+/*
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ *  Universal interface for Audio Codec '97
+ *
+ *  For more details look to AC '97 component specification revision 2.1
+ *  by Intel Corporation (http://developer.intel.com).
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include "info.h"
+#include "control.h"
+
+/*
+ *  ASAHI KASEI - AK4531 codec
+ *  - not really AC'97 codec, but it uses very similar interface as AC'97
+ */
+
+/*
+ *  AK4531 codec registers
+ */
+
+#define AK4531_LMASTER  0x00	/* master volume left */
+#define AK4531_RMASTER  0x01	/* master volume right */
+#define AK4531_LVOICE   0x02	/* channel volume left */
+#define AK4531_RVOICE   0x03	/* channel volume right */
+#define AK4531_LFM      0x04	/* FM volume left */
+#define AK4531_RFM      0x05	/* FM volume right */
+#define AK4531_LCD      0x06	/* CD volume left */
+#define AK4531_RCD      0x07	/* CD volume right */
+#define AK4531_LLINE    0x08	/* LINE volume left */
+#define AK4531_RLINE    0x09	/* LINE volume right */
+#define AK4531_LAUXA    0x0a	/* AUXA volume left */
+#define AK4531_RAUXA    0x0b	/* AUXA volume right */
+#define AK4531_MONO1    0x0c	/* MONO1 volume left */
+#define AK4531_MONO2    0x0d	/* MONO1 volume right */
+#define AK4531_MIC      0x0e	/* MIC volume */
+#define AK4531_MONO_OUT 0x0f	/* Mono-out volume */
+#define AK4531_OUT_SW1  0x10	/* Output mixer switch 1 */
+#define AK4531_OUT_SW2  0x11	/* Output mixer switch 2 */
+#define AK4531_LIN_SW1  0x12	/* Input left mixer switch 1 */
+#define AK4531_RIN_SW1  0x13	/* Input right mixer switch 1 */
+#define AK4531_LIN_SW2  0x14	/* Input left mixer switch 2 */
+#define AK4531_RIN_SW2  0x15	/* Input right mixer switch 2 */
+#define AK4531_RESET    0x16	/* Reset & power down */
+#define AK4531_CLOCK    0x17	/* Clock select */
+#define AK4531_AD_IN    0x18	/* AD input select */
+#define AK4531_MIC_GAIN 0x19	/* MIC amplified gain */
+
+struct snd_ak4531 {
+	void (*write) (struct snd_ak4531 *ak4531, unsigned short reg,
+		       unsigned short val);
+	void *private_data;
+	void (*private_free) (struct snd_ak4531 *ak4531);
+	/* --- */
+	unsigned char regs[0x20];
+	struct mutex reg_mutex;
+};
+
+int snd_ak4531_mixer(struct snd_card *card, struct snd_ak4531 *_ak4531,
+		     struct snd_ak4531 **rak4531);
+
+#ifdef CONFIG_PM
+void snd_ak4531_suspend(struct snd_ak4531 *ak4531);
+void snd_ak4531_resume(struct snd_ak4531 *ak4531);
+#endif
+
+#endif /* __SOUND_AK4531_CODEC_H */
diff --git a/include/sound/ak4641.h b/include/sound/ak4641.h
new file mode 100644
index 00000000..96d1991c
--- /dev/null
+++ b/include/sound/ak4641.h
@@ -0,0 +1,26 @@
+/*
+ * AK4641 ALSA SoC Codec driver
+ *
+ * Copyright 2009 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __AK4641_H
+#define __AK4641_H
+
+/**
+ * struct ak4641_platform_data - platform specific AK4641 configuration
+ * @gpio_power:	GPIO to control external power to AK4641
+ * @gpio_npdn:	GPIO connected to AK4641 nPDN pin
+ *
+ * Both GPIO parameters are optional.
+ */
+struct ak4641_platform_data {
+	int gpio_power;
+	int gpio_npdn;
+};
+
+#endif /* __AK4641_H */
diff --git a/include/sound/ak4xxx-adda.h b/include/sound/ak4xxx-adda.h
new file mode 100644
index 00000000..030b87c2
--- /dev/null
+++ b/include/sound/ak4xxx-adda.h
@@ -0,0 +1,99 @@
+#ifndef __SOUND_AK4XXX_ADDA_H
+#define __SOUND_AK4XXX_ADDA_H
+
+/*
+ *   ALSA driver for AK4524 / AK4528 / AK4529 / AK4355 / AK4381
+ *   AD and DA converters
+ *
+ *	Copyright (c) 2000 Jaroslav Kysela <perex@perex.cz>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */      
+
+#ifndef AK4XXX_MAX_CHIPS
+#define AK4XXX_MAX_CHIPS	4
+#endif
+
+struct snd_akm4xxx;
+
+struct snd_ak4xxx_ops {
+	void (*lock)(struct snd_akm4xxx *ak, int chip);
+	void (*unlock)(struct snd_akm4xxx *ak, int chip);
+	void (*write)(struct snd_akm4xxx *ak, int chip, unsigned char reg,
+		      unsigned char val);
+	void (*set_rate_val)(struct snd_akm4xxx *ak, unsigned int rate);
+};
+
+#define AK4XXX_IMAGE_SIZE	(AK4XXX_MAX_CHIPS * 16)	/* 64 bytes */
+
+/* DAC label and channels */
+struct snd_akm4xxx_dac_channel {
+	char *name;		/* mixer volume name */
+	unsigned int num_channels;
+	char *switch_name;		/* mixer switch*/
+};
+
+/* ADC labels and channels */
+struct snd_akm4xxx_adc_channel {
+	char *name;		/* capture gain volume label */
+	char *switch_name;	/* capture switch */
+	unsigned int num_channels;
+	char *selector_name;	/* capture source select label */
+	const char **input_names; /* capture source names (NULL terminated) */
+};
+
+struct snd_akm4xxx {
+	struct snd_card *card;
+	unsigned int num_adcs;			/* AK4524 or AK4528 ADCs */
+	unsigned int num_dacs;			/* AK4524 or AK4528 DACs */
+	unsigned char images[AK4XXX_IMAGE_SIZE]; /* saved register image */
+	unsigned char volumes[AK4XXX_IMAGE_SIZE]; /* saved volume values */
+	unsigned long private_value[AK4XXX_MAX_CHIPS];	/* helper for driver */
+	void *private_data[AK4XXX_MAX_CHIPS];		/* helper for driver */
+	/* template should fill the following fields */
+	unsigned int idx_offset;		/* control index offset */
+	enum {
+		SND_AK4524, SND_AK4528, SND_AK4529,
+		SND_AK4355, SND_AK4358, SND_AK4381,
+		SND_AK5365, SND_AK4620,
+	} type;
+
+	/* (array) information of combined codecs */
+	const struct snd_akm4xxx_dac_channel *dac_info;
+	const struct snd_akm4xxx_adc_channel *adc_info;
+
+	struct snd_ak4xxx_ops ops;
+	unsigned int num_chips;
+	unsigned int total_regs;
+	const char *name;
+};
+
+void snd_akm4xxx_write(struct snd_akm4xxx *ak, int chip, unsigned char reg,
+		       unsigned char val);
+void snd_akm4xxx_reset(struct snd_akm4xxx *ak, int state);
+void snd_akm4xxx_init(struct snd_akm4xxx *ak);
+int snd_akm4xxx_build_controls(struct snd_akm4xxx *ak);
+
+#define snd_akm4xxx_get(ak,chip,reg) \
+	(ak)->images[(chip) * 16 + (reg)]
+#define snd_akm4xxx_set(ak,chip,reg,val) \
+	((ak)->images[(chip) * 16 + (reg)] = (val))
+#define snd_akm4xxx_get_vol(ak,chip,reg) \
+	(ak)->volumes[(chip) * 16 + (reg)]
+#define snd_akm4xxx_set_vol(ak,chip,reg,val) \
+	((ak)->volumes[(chip) * 16 + (reg)] = (val))
+
+#endif /* __SOUND_AK4XXX_ADDA_H */
diff --git a/include/sound/alc5623.h b/include/sound/alc5623.h
new file mode 100644
index 00000000..422c97d4
--- /dev/null
+++ b/include/sound/alc5623.h
@@ -0,0 +1,15 @@
+#ifndef _INCLUDE_SOUND_ALC5623_H
+#define _INCLUDE_SOUND_ALC5623_H
+struct alc5623_platform_data {
+	/* configure :                              */
+	/* Lineout/Speaker Amps Vmid ratio control  */
+	/* enable/disable adc/dac high pass filters */
+	unsigned int add_ctrl;
+	/* configure :                              */
+	/* output to enable when jack is low        */
+	/* output to enable when jack is high       */
+	/* jack detect (gpio/nc/jack detect [12]    */
+	unsigned int jack_det_ctrl;
+};
+#endif
+
diff --git a/include/sound/asequencer.h b/include/sound/asequencer.h
new file mode 100644
index 00000000..1505e6d5
--- /dev/null
+++ b/include/sound/asequencer.h
@@ -0,0 +1,678 @@
+/*
+ *  Main header file for the ALSA sequencer
+ *  Copyright (c) 1998-1999 by Frank van de Pol <fvdpol@coil.demon.nl>
+ *            (c) 1998-1999 by Jaroslav Kysela <perex@perex.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+#ifndef __SOUND_ASEQUENCER_H
+#define __SOUND_ASEQUENCER_H
+
+#ifdef __KERNEL__
+#include <linux/ioctl.h>
+#include <sound/asound.h>
+#endif
+
+/** version of the sequencer */
+#define SNDRV_SEQ_VERSION SNDRV_PROTOCOL_VERSION (1, 0, 1)
+
+/**
+ * definition of sequencer event types
+ */
+
+/** system messages
+ * event data type = #snd_seq_result
+ */
+#define SNDRV_SEQ_EVENT_SYSTEM		0
+#define SNDRV_SEQ_EVENT_RESULT		1
+
+/** note messages (channel specific)
+ * event data type = #snd_seq_ev_note
+ */
+#define SNDRV_SEQ_EVENT_NOTE		5
+#define SNDRV_SEQ_EVENT_NOTEON		6
+#define SNDRV_SEQ_EVENT_NOTEOFF		7
+#define SNDRV_SEQ_EVENT_KEYPRESS	8
+	
+/** control messages (channel specific)
+ * event data type = #snd_seq_ev_ctrl
+ */
+#define SNDRV_SEQ_EVENT_CONTROLLER	10
+#define SNDRV_SEQ_EVENT_PGMCHANGE	11
+#define SNDRV_SEQ_EVENT_CHANPRESS	12
+#define SNDRV_SEQ_EVENT_PITCHBEND	13	/**< from -8192 to 8191 */
+#define SNDRV_SEQ_EVENT_CONTROL14	14	/**< 14 bit controller value */
+#define SNDRV_SEQ_EVENT_NONREGPARAM	15	/**< 14 bit NRPN address + 14 bit unsigned value */
+#define SNDRV_SEQ_EVENT_REGPARAM	16	/**< 14 bit RPN address + 14 bit unsigned value */
+
+/** synchronisation messages
+ * event data type = #snd_seq_ev_ctrl
+ */
+#define SNDRV_SEQ_EVENT_SONGPOS		20	/* Song Position Pointer with LSB and MSB values */
+#define SNDRV_SEQ_EVENT_SONGSEL		21	/* Song Select with song ID number */
+#define SNDRV_SEQ_EVENT_QFRAME		22	/* midi time code quarter frame */
+#define SNDRV_SEQ_EVENT_TIMESIGN	23	/* SMF Time Signature event */
+#define SNDRV_SEQ_EVENT_KEYSIGN		24	/* SMF Key Signature event */
+	        
+/** timer messages
+ * event data type = snd_seq_ev_queue_control
+ */
+#define SNDRV_SEQ_EVENT_START		30	/* midi Real Time Start message */
+#define SNDRV_SEQ_EVENT_CONTINUE	31	/* midi Real Time Continue message */
+#define SNDRV_SEQ_EVENT_STOP		32	/* midi Real Time Stop message */	
+#define	SNDRV_SEQ_EVENT_SETPOS_TICK	33	/* set tick queue position */
+#define SNDRV_SEQ_EVENT_SETPOS_TIME	34	/* set realtime queue position */
+#define SNDRV_SEQ_EVENT_TEMPO		35	/* (SMF) Tempo event */
+#define SNDRV_SEQ_EVENT_CLOCK		36	/* midi Real Time Clock message */
+#define SNDRV_SEQ_EVENT_TICK		37	/* midi Real Time Tick message */
+#define SNDRV_SEQ_EVENT_QUEUE_SKEW	38	/* skew queue tempo */
+
+/** others
+ * event data type = none
+ */
+#define SNDRV_SEQ_EVENT_TUNE_REQUEST	40	/* tune request */
+#define SNDRV_SEQ_EVENT_RESET		41	/* reset to power-on state */
+#define SNDRV_SEQ_EVENT_SENSING		42	/* "active sensing" event */
+
+/** echo back, kernel private messages
+ * event data type = any type
+ */
+#define SNDRV_SEQ_EVENT_ECHO		50	/* echo event */
+#define SNDRV_SEQ_EVENT_OSS		51	/* OSS raw event */
+
+/** system status messages (broadcast for subscribers)
+ * event data type = snd_seq_addr
+ */
+#define SNDRV_SEQ_EVENT_CLIENT_START	60	/* new client has connected */
+#define SNDRV_SEQ_EVENT_CLIENT_EXIT	61	/* client has left the system */
+#define SNDRV_SEQ_EVENT_CLIENT_CHANGE	62	/* client status/info has changed */
+#define SNDRV_SEQ_EVENT_PORT_START	63	/* new port was created */
+#define SNDRV_SEQ_EVENT_PORT_EXIT	64	/* port was deleted from system */
+#define SNDRV_SEQ_EVENT_PORT_CHANGE	65	/* port status/info has changed */
+
+/** port connection changes
+ * event data type = snd_seq_connect
+ */
+#define SNDRV_SEQ_EVENT_PORT_SUBSCRIBED	66	/* ports connected */
+#define SNDRV_SEQ_EVENT_PORT_UNSUBSCRIBED 67	/* ports disconnected */
+
+/* 70-89:  synthesizer events - obsoleted */
+
+/** user-defined events with fixed length
+ * event data type = any
+ */
+#define SNDRV_SEQ_EVENT_USR0		90
+#define SNDRV_SEQ_EVENT_USR1		91
+#define SNDRV_SEQ_EVENT_USR2		92
+#define SNDRV_SEQ_EVENT_USR3		93
+#define SNDRV_SEQ_EVENT_USR4		94
+#define SNDRV_SEQ_EVENT_USR5		95
+#define SNDRV_SEQ_EVENT_USR6		96
+#define SNDRV_SEQ_EVENT_USR7		97
+#define SNDRV_SEQ_EVENT_USR8		98
+#define SNDRV_SEQ_EVENT_USR9		99
+
+/* 100-118: instrument layer - obsoleted */
+/* 119-129: reserved */
+
+/* 130-139: variable length events
+ * event data type = snd_seq_ev_ext
+ * (SNDRV_SEQ_EVENT_LENGTH_VARIABLE must be set)
+ */
+#define SNDRV_SEQ_EVENT_SYSEX		130	/* system exclusive data (variable length) */
+#define SNDRV_SEQ_EVENT_BOUNCE		131	/* error event */
+/* 132-134: reserved */
+#define SNDRV_SEQ_EVENT_USR_VAR0	135
+#define SNDRV_SEQ_EVENT_USR_VAR1	136
+#define SNDRV_SEQ_EVENT_USR_VAR2	137
+#define SNDRV_SEQ_EVENT_USR_VAR3	138
+#define SNDRV_SEQ_EVENT_USR_VAR4	139
+
+/* 150-151: kernel events with quote - DO NOT use in user clients */
+#define SNDRV_SEQ_EVENT_KERNEL_ERROR	150
+#define SNDRV_SEQ_EVENT_KERNEL_QUOTE	151	/* obsolete */
+
+/* 152-191: reserved */
+
+/* 192-254: hardware specific events */
+
+/* 255: special event */
+#define SNDRV_SEQ_EVENT_NONE		255
+
+
+typedef unsigned char snd_seq_event_type_t;
+
+/** event address */
+struct snd_seq_addr {
+	unsigned char client;	/**< Client number:         0..255, 255 = broadcast to all clients */
+	unsigned char port;	/**< Port within client:    0..255, 255 = broadcast to all ports */
+};
+
+/** port connection */
+struct snd_seq_connect {
+	struct snd_seq_addr sender;
+	struct snd_seq_addr dest;
+};
+
+
+#define SNDRV_SEQ_ADDRESS_UNKNOWN	253	/* unknown source */
+#define SNDRV_SEQ_ADDRESS_SUBSCRIBERS	254	/* send event to all subscribed ports */
+#define SNDRV_SEQ_ADDRESS_BROADCAST	255	/* send event to all queues/clients/ports/channels */
+#define SNDRV_SEQ_QUEUE_DIRECT		253	/* direct dispatch */
+
+	/* event mode flag - NOTE: only 8 bits available! */
+#define SNDRV_SEQ_TIME_STAMP_TICK	(0<<0) /* timestamp in clock ticks */
+#define SNDRV_SEQ_TIME_STAMP_REAL	(1<<0) /* timestamp in real time */
+#define SNDRV_SEQ_TIME_STAMP_MASK	(1<<0)
+
+#define SNDRV_SEQ_TIME_MODE_ABS		(0<<1)	/* absolute timestamp */
+#define SNDRV_SEQ_TIME_MODE_REL		(1<<1)	/* relative to current time */
+#define SNDRV_SEQ_TIME_MODE_MASK	(1<<1)
+
+#define SNDRV_SEQ_EVENT_LENGTH_FIXED	(0<<2)	/* fixed event size */
+#define SNDRV_SEQ_EVENT_LENGTH_VARIABLE	(1<<2)	/* variable event size */
+#define SNDRV_SEQ_EVENT_LENGTH_VARUSR	(2<<2)	/* variable event size - user memory space */
+#define SNDRV_SEQ_EVENT_LENGTH_MASK	(3<<2)
+
+#define SNDRV_SEQ_PRIORITY_NORMAL	(0<<4)	/* normal priority */
+#define SNDRV_SEQ_PRIORITY_HIGH		(1<<4)	/* event should be processed before others */
+#define SNDRV_SEQ_PRIORITY_MASK		(1<<4)
+
+
+	/* note event */
+struct snd_seq_ev_note {
+	unsigned char channel;
+	unsigned char note;
+	unsigned char velocity;
+	unsigned char off_velocity;	/* only for SNDRV_SEQ_EVENT_NOTE */
+	unsigned int duration;		/* only for SNDRV_SEQ_EVENT_NOTE */
+};
+
+	/* controller event */
+struct snd_seq_ev_ctrl {
+	unsigned char channel;
+	unsigned char unused1, unused2, unused3;	/* pad */
+	unsigned int param;
+	signed int value;
+};
+
+	/* generic set of bytes (12x8 bit) */
+struct snd_seq_ev_raw8 {
+	unsigned char d[12];	/* 8 bit value */
+};
+
+	/* generic set of integers (3x32 bit) */
+struct snd_seq_ev_raw32 {
+	unsigned int d[3];	/* 32 bit value */
+};
+
+	/* external stored data */
+struct snd_seq_ev_ext {
+	unsigned int len;	/* length of data */
+	void *ptr;		/* pointer to data (note: maybe 64-bit) */
+} __attribute__((packed));
+
+struct snd_seq_result {
+	int event;		/* processed event type */
+	int result;
+};
+
+
+struct snd_seq_real_time {
+	unsigned int tv_sec;	/* seconds */
+	unsigned int tv_nsec;	/* nanoseconds */
+};
+
+typedef unsigned int snd_seq_tick_time_t;	/* midi ticks */
+
+union snd_seq_timestamp {
+	snd_seq_tick_time_t tick;
+	struct snd_seq_real_time time;
+};
+
+struct snd_seq_queue_skew {
+	unsigned int value;
+	unsigned int base;
+};
+
+	/* queue timer control */
+struct snd_seq_ev_queue_control {
+	unsigned char queue;			/* affected queue */
+	unsigned char pad[3];			/* reserved */
+	union {
+		signed int value;		/* affected value (e.g. tempo) */
+		union snd_seq_timestamp time;	/* time */
+		unsigned int position;		/* sync position */
+		struct snd_seq_queue_skew skew;
+		unsigned int d32[2];
+		unsigned char d8[8];
+	} param;
+};
+
+	/* quoted event - inside the kernel only */
+struct snd_seq_ev_quote {
+	struct snd_seq_addr origin;		/* original sender */
+	unsigned short value;		/* optional data */
+	struct snd_seq_event *event;		/* quoted event */
+} __attribute__((packed));
+
+
+	/* sequencer event */
+struct snd_seq_event {
+	snd_seq_event_type_t type;	/* event type */
+	unsigned char flags;		/* event flags */
+	char tag;
+	
+	unsigned char queue;		/* schedule queue */
+	union snd_seq_timestamp time;	/* schedule time */
+
+
+	struct snd_seq_addr source;	/* source address */
+	struct snd_seq_addr dest;	/* destination address */
+
+	union {				/* event data... */
+		struct snd_seq_ev_note note;
+		struct snd_seq_ev_ctrl control;
+		struct snd_seq_ev_raw8 raw8;
+		struct snd_seq_ev_raw32 raw32;
+		struct snd_seq_ev_ext ext;
+		struct snd_seq_ev_queue_control queue;
+		union snd_seq_timestamp time;
+		struct snd_seq_addr addr;
+		struct snd_seq_connect connect;
+		struct snd_seq_result result;
+		struct snd_seq_ev_quote quote;
+	} data;
+};
+
+
+/*
+ * bounce event - stored as variable size data
+ */
+struct snd_seq_event_bounce {
+	int err;
+	struct snd_seq_event event;
+	/* external data follows here. */
+};
+
+#ifdef __KERNEL__
+
+/* helper macro */
+#define snd_seq_event_bounce_ext_data(ev) ((void*)((char *)(ev)->data.ext.ptr + sizeof(struct snd_seq_event_bounce)))
+
+/*
+ * type check macros
+ */
+/* result events: 0-4 */
+#define snd_seq_ev_is_result_type(ev)	((ev)->type < 5)
+/* channel specific events: 5-19 */
+#define snd_seq_ev_is_channel_type(ev)	((ev)->type >= 5 && (ev)->type < 20)
+/* note events: 5-9 */
+#define snd_seq_ev_is_note_type(ev)	((ev)->type >= 5 && (ev)->type < 10)
+/* control events: 10-19 */
+#define snd_seq_ev_is_control_type(ev)	((ev)->type >= 10 && (ev)->type < 20)
+/* queue control events: 30-39 */
+#define snd_seq_ev_is_queue_type(ev)	((ev)->type >= 30 && (ev)->type < 40)
+/* system status messages */
+#define snd_seq_ev_is_message_type(ev)	((ev)->type >= 60 && (ev)->type < 69)
+/* sample messages */
+#define snd_seq_ev_is_sample_type(ev)	((ev)->type >= 70 && (ev)->type < 79)
+/* user-defined messages */
+#define snd_seq_ev_is_user_type(ev)	((ev)->type >= 90 && (ev)->type < 99)
+/* fixed length events: 0-99 */
+#define snd_seq_ev_is_fixed_type(ev)	((ev)->type < 100)
+/* variable length events: 130-139 */
+#define snd_seq_ev_is_variable_type(ev)	((ev)->type >= 130 && (ev)->type < 140)
+/* reserved for kernel */
+#define snd_seq_ev_is_reserved(ev)	((ev)->type >= 150)
+
+/* direct dispatched events */
+#define snd_seq_ev_is_direct(ev)	((ev)->queue == SNDRV_SEQ_QUEUE_DIRECT)
+
+/*
+ * macros to check event flags
+ */
+/* prior events */
+#define snd_seq_ev_is_prior(ev)		(((ev)->flags & SNDRV_SEQ_PRIORITY_MASK) == SNDRV_SEQ_PRIORITY_HIGH)
+
+/* event length type */
+#define snd_seq_ev_length_type(ev)	((ev)->flags & SNDRV_SEQ_EVENT_LENGTH_MASK)
+#define snd_seq_ev_is_fixed(ev)		(snd_seq_ev_length_type(ev) == SNDRV_SEQ_EVENT_LENGTH_FIXED)
+#define snd_seq_ev_is_variable(ev)	(snd_seq_ev_length_type(ev) == SNDRV_SEQ_EVENT_LENGTH_VARIABLE)
+#define snd_seq_ev_is_varusr(ev)	(snd_seq_ev_length_type(ev) == SNDRV_SEQ_EVENT_LENGTH_VARUSR)
+
+/* time-stamp type */
+#define snd_seq_ev_timestamp_type(ev)	((ev)->flags & SNDRV_SEQ_TIME_STAMP_MASK)
+#define snd_seq_ev_is_tick(ev)		(snd_seq_ev_timestamp_type(ev) == SNDRV_SEQ_TIME_STAMP_TICK)
+#define snd_seq_ev_is_real(ev)		(snd_seq_ev_timestamp_type(ev) == SNDRV_SEQ_TIME_STAMP_REAL)
+
+/* time-mode type */
+#define snd_seq_ev_timemode_type(ev)	((ev)->flags & SNDRV_SEQ_TIME_MODE_MASK)
+#define snd_seq_ev_is_abstime(ev)	(snd_seq_ev_timemode_type(ev) == SNDRV_SEQ_TIME_MODE_ABS)
+#define snd_seq_ev_is_reltime(ev)	(snd_seq_ev_timemode_type(ev) == SNDRV_SEQ_TIME_MODE_REL)
+
+/* queue sync port */
+#define snd_seq_queue_sync_port(q)	((q) + 16)
+
+#endif /* __KERNEL__ */
+
+	/* system information */
+struct snd_seq_system_info {
+	int queues;			/* maximum queues count */
+	int clients;			/* maximum clients count */
+	int ports;			/* maximum ports per client */
+	int channels;			/* maximum channels per port */
+	int cur_clients;		/* current clients */
+	int cur_queues;			/* current queues */
+	char reserved[24];
+};
+
+
+	/* system running information */
+struct snd_seq_running_info {
+	unsigned char client;		/* client id */
+	unsigned char big_endian;	/* 1 = big-endian */
+	unsigned char cpu_mode;		/* 4 = 32bit, 8 = 64bit */
+	unsigned char pad;		/* reserved */
+	unsigned char reserved[12];
+};
+
+
+	/* known client numbers */
+#define SNDRV_SEQ_CLIENT_SYSTEM		0
+	/* internal client numbers */
+#define SNDRV_SEQ_CLIENT_DUMMY		14	/* midi through */
+#define SNDRV_SEQ_CLIENT_OSS		15	/* oss sequencer emulator */
+
+
+	/* client types */
+typedef int __bitwise snd_seq_client_type_t;
+#define	NO_CLIENT	((__force snd_seq_client_type_t) 0)
+#define	USER_CLIENT	((__force snd_seq_client_type_t) 1)
+#define	KERNEL_CLIENT	((__force snd_seq_client_type_t) 2)
+                        
+	/* event filter flags */
+#define SNDRV_SEQ_FILTER_BROADCAST	(1<<0)	/* accept broadcast messages */
+#define SNDRV_SEQ_FILTER_MULTICAST	(1<<1)	/* accept multicast messages */
+#define SNDRV_SEQ_FILTER_BOUNCE		(1<<2)	/* accept bounce event in error */
+#define SNDRV_SEQ_FILTER_USE_EVENT	(1<<31)	/* use event filter */
+
+struct snd_seq_client_info {
+	int client;			/* client number to inquire */
+	snd_seq_client_type_t type;	/* client type */
+	char name[64];			/* client name */
+	unsigned int filter;		/* filter flags */
+	unsigned char multicast_filter[8]; /* multicast filter bitmap */
+	unsigned char event_filter[32];	/* event filter bitmap */
+	int num_ports;			/* RO: number of ports */
+	int event_lost;			/* number of lost events */
+	char reserved[64];		/* for future use */
+};
+
+
+/* client pool size */
+struct snd_seq_client_pool {
+	int client;			/* client number to inquire */
+	int output_pool;		/* outgoing (write) pool size */
+	int input_pool;			/* incoming (read) pool size */
+	int output_room;		/* minimum free pool size for select/blocking mode */
+	int output_free;		/* unused size */
+	int input_free;			/* unused size */
+	char reserved[64];
+};
+
+
+/* Remove events by specified criteria */
+
+#define SNDRV_SEQ_REMOVE_INPUT		(1<<0)	/* Flush input queues */
+#define SNDRV_SEQ_REMOVE_OUTPUT		(1<<1)	/* Flush output queues */
+#define SNDRV_SEQ_REMOVE_DEST		(1<<2)	/* Restrict by destination q:client:port */
+#define SNDRV_SEQ_REMOVE_DEST_CHANNEL	(1<<3)	/* Restrict by channel */
+#define SNDRV_SEQ_REMOVE_TIME_BEFORE	(1<<4)	/* Restrict to before time */
+#define SNDRV_SEQ_REMOVE_TIME_AFTER	(1<<5)	/* Restrict to time or after */
+#define SNDRV_SEQ_REMOVE_TIME_TICK	(1<<6)	/* Time is in ticks */
+#define SNDRV_SEQ_REMOVE_EVENT_TYPE	(1<<7)	/* Restrict to event type */
+#define SNDRV_SEQ_REMOVE_IGNORE_OFF 	(1<<8)	/* Do not flush off events */
+#define SNDRV_SEQ_REMOVE_TAG_MATCH 	(1<<9)	/* Restrict to events with given tag */
+
+struct snd_seq_remove_events {
+	unsigned int  remove_mode;	/* Flags that determine what gets removed */
+
+	union snd_seq_timestamp time;
+
+	unsigned char queue;	/* Queue for REMOVE_DEST */
+	struct snd_seq_addr dest;	/* Address for REMOVE_DEST */
+	unsigned char channel;	/* Channel for REMOVE_DEST */
+
+	int  type;	/* For REMOVE_EVENT_TYPE */
+	char  tag;	/* Tag for REMOVE_TAG */
+
+	int  reserved[10];	/* To allow for future binary compatibility */
+
+};
+
+
+	/* known port numbers */
+#define SNDRV_SEQ_PORT_SYSTEM_TIMER	0
+#define SNDRV_SEQ_PORT_SYSTEM_ANNOUNCE	1
+
+	/* port capabilities (32 bits) */
+#define SNDRV_SEQ_PORT_CAP_READ		(1<<0)	/* readable from this port */
+#define SNDRV_SEQ_PORT_CAP_WRITE	(1<<1)	/* writable to this port */
+
+#define SNDRV_SEQ_PORT_CAP_SYNC_READ	(1<<2)
+#define SNDRV_SEQ_PORT_CAP_SYNC_WRITE	(1<<3)
+
+#define SNDRV_SEQ_PORT_CAP_DUPLEX	(1<<4)
+
+#define SNDRV_SEQ_PORT_CAP_SUBS_READ	(1<<5)	/* allow read subscription */
+#define SNDRV_SEQ_PORT_CAP_SUBS_WRITE	(1<<6)	/* allow write subscription */
+#define SNDRV_SEQ_PORT_CAP_NO_EXPORT	(1<<7)	/* routing not allowed */
+
+	/* port type */
+#define SNDRV_SEQ_PORT_TYPE_SPECIFIC	(1<<0)	/* hardware specific */
+#define SNDRV_SEQ_PORT_TYPE_MIDI_GENERIC (1<<1)	/* generic MIDI device */
+#define SNDRV_SEQ_PORT_TYPE_MIDI_GM	(1<<2)	/* General MIDI compatible device */
+#define SNDRV_SEQ_PORT_TYPE_MIDI_GS	(1<<3)	/* GS compatible device */
+#define SNDRV_SEQ_PORT_TYPE_MIDI_XG	(1<<4)	/* XG compatible device */
+#define SNDRV_SEQ_PORT_TYPE_MIDI_MT32	(1<<5)	/* MT-32 compatible device */
+#define SNDRV_SEQ_PORT_TYPE_MIDI_GM2	(1<<6)	/* General MIDI 2 compatible device */
+
+/* other standards...*/
+#define SNDRV_SEQ_PORT_TYPE_SYNTH	(1<<10)	/* Synth device (no MIDI compatible - direct wavetable) */
+#define SNDRV_SEQ_PORT_TYPE_DIRECT_SAMPLE (1<<11)	/* Sampling device (support sample download) */
+#define SNDRV_SEQ_PORT_TYPE_SAMPLE	(1<<12)	/* Sampling device (sample can be downloaded at any time) */
+/*...*/
+#define SNDRV_SEQ_PORT_TYPE_HARDWARE	(1<<16)	/* driver for a hardware device */
+#define SNDRV_SEQ_PORT_TYPE_SOFTWARE	(1<<17)	/* implemented in software */
+#define SNDRV_SEQ_PORT_TYPE_SYNTHESIZER	(1<<18)	/* generates sound */
+#define SNDRV_SEQ_PORT_TYPE_PORT	(1<<19)	/* connects to other device(s) */
+#define SNDRV_SEQ_PORT_TYPE_APPLICATION	(1<<20)	/* application (sequencer/editor) */
+
+/* misc. conditioning flags */
+#define SNDRV_SEQ_PORT_FLG_GIVEN_PORT	(1<<0)
+#define SNDRV_SEQ_PORT_FLG_TIMESTAMP	(1<<1)
+#define SNDRV_SEQ_PORT_FLG_TIME_REAL	(1<<2)
+
+struct snd_seq_port_info {
+	struct snd_seq_addr addr;	/* client/port numbers */
+	char name[64];			/* port name */
+
+	unsigned int capability;	/* port capability bits */
+	unsigned int type;		/* port type bits */
+	int midi_channels;		/* channels per MIDI port */
+	int midi_voices;		/* voices per MIDI port */
+	int synth_voices;		/* voices per SYNTH port */
+
+	int read_use;			/* R/O: subscribers for output (from this port) */
+	int write_use;			/* R/O: subscribers for input (to this port) */
+
+	void *kernel;			/* reserved for kernel use (must be NULL) */
+	unsigned int flags;		/* misc. conditioning */
+	unsigned char time_queue;	/* queue # for timestamping */
+	char reserved[59];		/* for future use */
+};
+
+
+/* queue flags */
+#define SNDRV_SEQ_QUEUE_FLG_SYNC	(1<<0)	/* sync enabled */
+
+/* queue information */
+struct snd_seq_queue_info {
+	int queue;		/* queue id */
+
+	/*
+	 *  security settings, only owner of this queue can start/stop timer
+	 *  etc. if the queue is locked for other clients
+	 */
+	int owner;		/* client id for owner of the queue */
+	unsigned locked:1;	/* timing queue locked for other queues */
+	char name[64];		/* name of this queue */
+	unsigned int flags;	/* flags */
+	char reserved[60];	/* for future use */
+
+};
+
+/* queue info/status */
+struct snd_seq_queue_status {
+	int queue;			/* queue id */
+	int events;			/* read-only - queue size */
+	snd_seq_tick_time_t tick;	/* current tick */
+	struct snd_seq_real_time time;	/* current time */
+	int running;			/* running state of queue */
+	int flags;			/* various flags */
+	char reserved[64];		/* for the future */
+};
+
+
+/* queue tempo */
+struct snd_seq_queue_tempo {
+	int queue;			/* sequencer queue */
+	unsigned int tempo;		/* current tempo, us/tick */
+	int ppq;			/* time resolution, ticks/quarter */
+	unsigned int skew_value;	/* queue skew */
+	unsigned int skew_base;		/* queue skew base */
+	char reserved[24];		/* for the future */
+};
+
+
+/* sequencer timer sources */
+#define SNDRV_SEQ_TIMER_ALSA		0	/* ALSA timer */
+#define SNDRV_SEQ_TIMER_MIDI_CLOCK	1	/* Midi Clock (CLOCK event) */
+#define SNDRV_SEQ_TIMER_MIDI_TICK	2	/* Midi Timer Tick (TICK event) */
+
+/* queue timer info */
+struct snd_seq_queue_timer {
+	int queue;			/* sequencer queue */
+	int type;			/* source timer type */
+	union {
+		struct {
+			struct snd_timer_id id;	/* ALSA's timer ID */
+			unsigned int resolution;	/* resolution in Hz */
+		} alsa;
+	} u;
+	char reserved[64];		/* for the future use */
+};
+
+
+struct snd_seq_queue_client {
+	int queue;		/* sequencer queue */
+	int client;		/* sequencer client */
+	int used;		/* queue is used with this client
+				   (must be set for accepting events) */
+	/* per client watermarks */
+	char reserved[64];	/* for future use */
+};
+
+
+#define SNDRV_SEQ_PORT_SUBS_EXCLUSIVE	(1<<0)	/* exclusive connection */
+#define SNDRV_SEQ_PORT_SUBS_TIMESTAMP	(1<<1)
+#define SNDRV_SEQ_PORT_SUBS_TIME_REAL	(1<<2)
+
+struct snd_seq_port_subscribe {
+	struct snd_seq_addr sender;	/* sender address */
+	struct snd_seq_addr dest;	/* destination address */
+	unsigned int voices;		/* number of voices to be allocated (0 = don't care) */
+	unsigned int flags;		/* modes */
+	unsigned char queue;		/* input time-stamp queue (optional) */
+	unsigned char pad[3];		/* reserved */
+	char reserved[64];
+};
+
+/* type of query subscription */
+#define SNDRV_SEQ_QUERY_SUBS_READ	0
+#define SNDRV_SEQ_QUERY_SUBS_WRITE	1
+
+struct snd_seq_query_subs {
+	struct snd_seq_addr root;	/* client/port id to be searched */
+	int type;		/* READ or WRITE */
+	int index;		/* 0..N-1 */
+	int num_subs;		/* R/O: number of subscriptions on this port */
+	struct snd_seq_addr addr;	/* R/O: result */
+	unsigned char queue;	/* R/O: result */
+	unsigned int flags;	/* R/O: result */
+	char reserved[64];	/* for future use */
+};
+
+
+/*
+ *  IOCTL commands
+ */
+
+#define SNDRV_SEQ_IOCTL_PVERSION	_IOR ('S', 0x00, int)
+#define SNDRV_SEQ_IOCTL_CLIENT_ID	_IOR ('S', 0x01, int)
+#define SNDRV_SEQ_IOCTL_SYSTEM_INFO	_IOWR('S', 0x02, struct snd_seq_system_info)
+#define SNDRV_SEQ_IOCTL_RUNNING_MODE	_IOWR('S', 0x03, struct snd_seq_running_info)
+
+#define SNDRV_SEQ_IOCTL_GET_CLIENT_INFO	_IOWR('S', 0x10, struct snd_seq_client_info)
+#define SNDRV_SEQ_IOCTL_SET_CLIENT_INFO	_IOW ('S', 0x11, struct snd_seq_client_info)
+
+#define SNDRV_SEQ_IOCTL_CREATE_PORT	_IOWR('S', 0x20, struct snd_seq_port_info)
+#define SNDRV_SEQ_IOCTL_DELETE_PORT	_IOW ('S', 0x21, struct snd_seq_port_info)
+#define SNDRV_SEQ_IOCTL_GET_PORT_INFO	_IOWR('S', 0x22, struct snd_seq_port_info)
+#define SNDRV_SEQ_IOCTL_SET_PORT_INFO	_IOW ('S', 0x23, struct snd_seq_port_info)
+
+#define SNDRV_SEQ_IOCTL_SUBSCRIBE_PORT	_IOW ('S', 0x30, struct snd_seq_port_subscribe)
+#define SNDRV_SEQ_IOCTL_UNSUBSCRIBE_PORT _IOW ('S', 0x31, struct snd_seq_port_subscribe)
+
+#define SNDRV_SEQ_IOCTL_CREATE_QUEUE	_IOWR('S', 0x32, struct snd_seq_queue_info)
+#define SNDRV_SEQ_IOCTL_DELETE_QUEUE	_IOW ('S', 0x33, struct snd_seq_queue_info)
+#define SNDRV_SEQ_IOCTL_GET_QUEUE_INFO	_IOWR('S', 0x34, struct snd_seq_queue_info)
+#define SNDRV_SEQ_IOCTL_SET_QUEUE_INFO	_IOWR('S', 0x35, struct snd_seq_queue_info)
+#define SNDRV_SEQ_IOCTL_GET_NAMED_QUEUE	_IOWR('S', 0x36, struct snd_seq_queue_info)
+#define SNDRV_SEQ_IOCTL_GET_QUEUE_STATUS _IOWR('S', 0x40, struct snd_seq_queue_status)
+#define SNDRV_SEQ_IOCTL_GET_QUEUE_TEMPO	_IOWR('S', 0x41, struct snd_seq_queue_tempo)
+#define SNDRV_SEQ_IOCTL_SET_QUEUE_TEMPO	_IOW ('S', 0x42, struct snd_seq_queue_tempo)
+#define SNDRV_SEQ_IOCTL_GET_QUEUE_OWNER	_IOWR('S', 0x43, struct snd_seq_queue_owner)
+#define SNDRV_SEQ_IOCTL_SET_QUEUE_OWNER	_IOW ('S', 0x44, struct snd_seq_queue_owner)
+#define SNDRV_SEQ_IOCTL_GET_QUEUE_TIMER	_IOWR('S', 0x45, struct snd_seq_queue_timer)
+#define SNDRV_SEQ_IOCTL_SET_QUEUE_TIMER	_IOW ('S', 0x46, struct snd_seq_queue_timer)
+/* XXX
+#define SNDRV_SEQ_IOCTL_GET_QUEUE_SYNC	_IOWR('S', 0x53, struct snd_seq_queue_sync)
+#define SNDRV_SEQ_IOCTL_SET_QUEUE_SYNC	_IOW ('S', 0x54, struct snd_seq_queue_sync)
+*/
+#define SNDRV_SEQ_IOCTL_GET_QUEUE_CLIENT	_IOWR('S', 0x49, struct snd_seq_queue_client)
+#define SNDRV_SEQ_IOCTL_SET_QUEUE_CLIENT	_IOW ('S', 0x4a, struct snd_seq_queue_client)
+#define SNDRV_SEQ_IOCTL_GET_CLIENT_POOL	_IOWR('S', 0x4b, struct snd_seq_client_pool)
+#define SNDRV_SEQ_IOCTL_SET_CLIENT_POOL	_IOW ('S', 0x4c, struct snd_seq_client_pool)
+#define SNDRV_SEQ_IOCTL_REMOVE_EVENTS	_IOW ('S', 0x4e, struct snd_seq_remove_events)
+#define SNDRV_SEQ_IOCTL_QUERY_SUBS	_IOWR('S', 0x4f, struct snd_seq_query_subs)
+#define SNDRV_SEQ_IOCTL_GET_SUBSCRIPTION	_IOWR('S', 0x50, struct snd_seq_port_subscribe)
+#define SNDRV_SEQ_IOCTL_QUERY_NEXT_CLIENT	_IOWR('S', 0x51, struct snd_seq_client_info)
+#define SNDRV_SEQ_IOCTL_QUERY_NEXT_PORT	_IOWR('S', 0x52, struct snd_seq_port_info)
+
+#endif /* __SOUND_ASEQUENCER_H */
diff --git a/include/sound/asound.h b/include/sound/asound.h
new file mode 100644
index 00000000..f80c7120
--- /dev/null
+++ b/include/sound/asound.h
@@ -0,0 +1,921 @@
+/*
+ *  Advanced Linux Sound Architecture - ALSA - Driver
+ *  Copyright (c) 1994-2003 by Jaroslav Kysela <perex@perex.cz>,
+ *                             Abramo Bagnara <abramo@alsa-project.org>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#ifndef __SOUND_ASOUND_H
+#define __SOUND_ASOUND_H
+
+#include <linux/types.h>
+
+#ifdef __KERNEL__
+#include <linux/ioctl.h>
+#include <linux/time.h>
+#include <asm/byteorder.h>
+
+#ifdef  __LITTLE_ENDIAN
+#define SNDRV_LITTLE_ENDIAN
+#else
+#ifdef __BIG_ENDIAN
+#define SNDRV_BIG_ENDIAN
+#else
+#error "Unsupported endian..."
+#endif
+#endif
+
+#endif /* __KERNEL__ **/
+
+/*
+ *  protocol version
+ */
+
+#define SNDRV_PROTOCOL_VERSION(major, minor, subminor) (((major)<<16)|((minor)<<8)|(subminor))
+#define SNDRV_PROTOCOL_MAJOR(version) (((version)>>16)&0xffff)
+#define SNDRV_PROTOCOL_MINOR(version) (((version)>>8)&0xff)
+#define SNDRV_PROTOCOL_MICRO(version) ((version)&0xff)
+#define SNDRV_PROTOCOL_INCOMPATIBLE(kversion, uversion) \
+	(SNDRV_PROTOCOL_MAJOR(kversion) != SNDRV_PROTOCOL_MAJOR(uversion) || \
+	 (SNDRV_PROTOCOL_MAJOR(kversion) == SNDRV_PROTOCOL_MAJOR(uversion) && \
+	   SNDRV_PROTOCOL_MINOR(kversion) != SNDRV_PROTOCOL_MINOR(uversion)))
+
+/****************************************************************************
+ *                                                                          *
+ *        Digital audio interface					    *
+ *                                                                          *
+ ****************************************************************************/
+
+struct snd_aes_iec958 {
+	unsigned char status[24];	/* AES/IEC958 channel status bits */
+	unsigned char subcode[147];	/* AES/IEC958 subcode bits */
+	unsigned char pad;		/* nothing */
+	unsigned char dig_subframe[4];	/* AES/IEC958 subframe bits */
+};
+
+/****************************************************************************
+ *                                                                          *
+ *      Section for driver hardware dependent interface - /dev/snd/hw?      *
+ *                                                                          *
+ ****************************************************************************/
+
+#define SNDRV_HWDEP_VERSION		SNDRV_PROTOCOL_VERSION(1, 0, 1)
+
+enum {
+	SNDRV_HWDEP_IFACE_OPL2 = 0,
+	SNDRV_HWDEP_IFACE_OPL3,
+	SNDRV_HWDEP_IFACE_OPL4,
+	SNDRV_HWDEP_IFACE_SB16CSP,	/* Creative Signal Processor */
+	SNDRV_HWDEP_IFACE_EMU10K1,	/* FX8010 processor in EMU10K1 chip */
+	SNDRV_HWDEP_IFACE_YSS225,	/* Yamaha FX processor */
+	SNDRV_HWDEP_IFACE_ICS2115,	/* Wavetable synth */
+	SNDRV_HWDEP_IFACE_SSCAPE,	/* Ensoniq SoundScape ISA card (MC68EC000) */
+	SNDRV_HWDEP_IFACE_VX,		/* Digigram VX cards */
+	SNDRV_HWDEP_IFACE_MIXART,	/* Digigram miXart cards */
+	SNDRV_HWDEP_IFACE_USX2Y,	/* Tascam US122, US224 & US428 usb */
+	SNDRV_HWDEP_IFACE_EMUX_WAVETABLE, /* EmuX wavetable */	
+	SNDRV_HWDEP_IFACE_BLUETOOTH,	/* Bluetooth audio */
+	SNDRV_HWDEP_IFACE_USX2Y_PCM,	/* Tascam US122, US224 & US428 rawusb pcm */
+	SNDRV_HWDEP_IFACE_PCXHR,	/* Digigram PCXHR */
+	SNDRV_HWDEP_IFACE_SB_RC,	/* SB Extigy/Audigy2NX remote control */
+	SNDRV_HWDEP_IFACE_HDA,		/* HD-audio */
+	SNDRV_HWDEP_IFACE_USB_STREAM,	/* direct access to usb stream */
+	SNDRV_HWDEP_IFACE_WMT,
+	/* Don't forget to change the following: */
+	//SNDRV_HWDEP_IFACE_LAST = SNDRV_HWDEP_IFACE_USB_STREAM
+	SNDRV_HWDEP_IFACE_LAST = SNDRV_HWDEP_IFACE_WMT
+};
+
+struct snd_hwdep_info {
+	unsigned int device;		/* WR: device number */
+	int card;			/* R: card number */
+	unsigned char id[64];		/* ID (user selectable) */
+	unsigned char name[80];		/* hwdep name */
+	int iface;			/* hwdep interface */
+	unsigned char reserved[64];	/* reserved for future */
+};
+
+/* generic DSP loader */
+struct snd_hwdep_dsp_status {
+	unsigned int version;		/* R: driver-specific version */
+	unsigned char id[32];		/* R: driver-specific ID string */
+	unsigned int num_dsps;		/* R: number of DSP images to transfer */
+	unsigned int dsp_loaded;	/* R: bit flags indicating the loaded DSPs */
+	unsigned int chip_ready;	/* R: 1 = initialization finished */
+	unsigned char reserved[16];	/* reserved for future use */
+};
+
+struct snd_hwdep_dsp_image {
+	unsigned int index;		/* W: DSP index */
+	unsigned char name[64];		/* W: ID (e.g. file name) */
+	unsigned char __user *image;	/* W: binary image */
+	size_t length;			/* W: size of image in bytes */
+	unsigned long driver_data;	/* W: driver-specific data */
+};
+
+#define SNDRV_HWDEP_IOCTL_PVERSION	_IOR ('H', 0x00, int)
+#define SNDRV_HWDEP_IOCTL_INFO		_IOR ('H', 0x01, struct snd_hwdep_info)
+#define SNDRV_HWDEP_IOCTL_DSP_STATUS	_IOR('H', 0x02, struct snd_hwdep_dsp_status)
+#define SNDRV_HWDEP_IOCTL_DSP_LOAD	_IOW('H', 0x03, struct snd_hwdep_dsp_image)
+
+/*****************************************************************************
+ *                                                                           *
+ *             Digital Audio (PCM) interface - /dev/snd/pcm??                *
+ *                                                                           *
+ *****************************************************************************/
+
+#define SNDRV_PCM_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 10)
+
+typedef unsigned long snd_pcm_uframes_t;
+typedef signed long snd_pcm_sframes_t;
+
+enum {
+	SNDRV_PCM_CLASS_GENERIC = 0,	/* standard mono or stereo device */
+	SNDRV_PCM_CLASS_MULTI,		/* multichannel device */
+	SNDRV_PCM_CLASS_MODEM,		/* software modem class */
+	SNDRV_PCM_CLASS_DIGITIZER,	/* digitizer class */
+	/* Don't forget to change the following: */
+	SNDRV_PCM_CLASS_LAST = SNDRV_PCM_CLASS_DIGITIZER,
+};
+
+enum {
+	SNDRV_PCM_SUBCLASS_GENERIC_MIX = 0, /* mono or stereo subdevices are mixed together */
+	SNDRV_PCM_SUBCLASS_MULTI_MIX,	/* multichannel subdevices are mixed together */
+	/* Don't forget to change the following: */
+	SNDRV_PCM_SUBCLASS_LAST = SNDRV_PCM_SUBCLASS_MULTI_MIX,
+};
+
+enum {
+	SNDRV_PCM_STREAM_PLAYBACK = 0,
+	SNDRV_PCM_STREAM_CAPTURE,
+	SNDRV_PCM_STREAM_LAST = SNDRV_PCM_STREAM_CAPTURE,
+};
+
+typedef int __bitwise snd_pcm_access_t;
+#define	SNDRV_PCM_ACCESS_MMAP_INTERLEAVED	((__force snd_pcm_access_t) 0) /* interleaved mmap */
+#define	SNDRV_PCM_ACCESS_MMAP_NONINTERLEAVED	((__force snd_pcm_access_t) 1) /* noninterleaved mmap */
+#define	SNDRV_PCM_ACCESS_MMAP_COMPLEX		((__force snd_pcm_access_t) 2) /* complex mmap */
+#define	SNDRV_PCM_ACCESS_RW_INTERLEAVED		((__force snd_pcm_access_t) 3) /* readi/writei */
+#define	SNDRV_PCM_ACCESS_RW_NONINTERLEAVED	((__force snd_pcm_access_t) 4) /* readn/writen */
+#define	SNDRV_PCM_ACCESS_LAST		SNDRV_PCM_ACCESS_RW_NONINTERLEAVED
+
+typedef int __bitwise snd_pcm_format_t;
+#define	SNDRV_PCM_FORMAT_S8	((__force snd_pcm_format_t) 0)
+#define	SNDRV_PCM_FORMAT_U8	((__force snd_pcm_format_t) 1)
+#define	SNDRV_PCM_FORMAT_S16_LE	((__force snd_pcm_format_t) 2)
+#define	SNDRV_PCM_FORMAT_S16_BE	((__force snd_pcm_format_t) 3)
+#define	SNDRV_PCM_FORMAT_U16_LE	((__force snd_pcm_format_t) 4)
+#define	SNDRV_PCM_FORMAT_U16_BE	((__force snd_pcm_format_t) 5)
+#define	SNDRV_PCM_FORMAT_S24_LE	((__force snd_pcm_format_t) 6) /* low three bytes */
+#define	SNDRV_PCM_FORMAT_S24_BE	((__force snd_pcm_format_t) 7) /* low three bytes */
+#define	SNDRV_PCM_FORMAT_U24_LE	((__force snd_pcm_format_t) 8) /* low three bytes */
+#define	SNDRV_PCM_FORMAT_U24_BE	((__force snd_pcm_format_t) 9) /* low three bytes */
+#define	SNDRV_PCM_FORMAT_S32_LE	((__force snd_pcm_format_t) 10)
+#define	SNDRV_PCM_FORMAT_S32_BE	((__force snd_pcm_format_t) 11)
+#define	SNDRV_PCM_FORMAT_U32_LE	((__force snd_pcm_format_t) 12)
+#define	SNDRV_PCM_FORMAT_U32_BE	((__force snd_pcm_format_t) 13)
+#define	SNDRV_PCM_FORMAT_FLOAT_LE	((__force snd_pcm_format_t) 14) /* 4-byte float, IEEE-754 32-bit, range -1.0 to 1.0 */
+#define	SNDRV_PCM_FORMAT_FLOAT_BE	((__force snd_pcm_format_t) 15) /* 4-byte float, IEEE-754 32-bit, range -1.0 to 1.0 */
+#define	SNDRV_PCM_FORMAT_FLOAT64_LE	((__force snd_pcm_format_t) 16) /* 8-byte float, IEEE-754 64-bit, range -1.0 to 1.0 */
+#define	SNDRV_PCM_FORMAT_FLOAT64_BE	((__force snd_pcm_format_t) 17) /* 8-byte float, IEEE-754 64-bit, range -1.0 to 1.0 */
+#define	SNDRV_PCM_FORMAT_IEC958_SUBFRAME_LE ((__force snd_pcm_format_t) 18) /* IEC-958 subframe, Little Endian */
+#define	SNDRV_PCM_FORMAT_IEC958_SUBFRAME_BE ((__force snd_pcm_format_t) 19) /* IEC-958 subframe, Big Endian */
+#define	SNDRV_PCM_FORMAT_MU_LAW		((__force snd_pcm_format_t) 20)
+#define	SNDRV_PCM_FORMAT_A_LAW		((__force snd_pcm_format_t) 21)
+#define	SNDRV_PCM_FORMAT_IMA_ADPCM	((__force snd_pcm_format_t) 22)
+#define	SNDRV_PCM_FORMAT_MPEG		((__force snd_pcm_format_t) 23)
+#define	SNDRV_PCM_FORMAT_GSM		((__force snd_pcm_format_t) 24)
+#define	SNDRV_PCM_FORMAT_SPECIAL	((__force snd_pcm_format_t) 31)
+#define	SNDRV_PCM_FORMAT_S24_3LE	((__force snd_pcm_format_t) 32)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_S24_3BE	((__force snd_pcm_format_t) 33)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_U24_3LE	((__force snd_pcm_format_t) 34)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_U24_3BE	((__force snd_pcm_format_t) 35)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_S20_3LE	((__force snd_pcm_format_t) 36)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_S20_3BE	((__force snd_pcm_format_t) 37)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_U20_3LE	((__force snd_pcm_format_t) 38)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_U20_3BE	((__force snd_pcm_format_t) 39)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_S18_3LE	((__force snd_pcm_format_t) 40)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_S18_3BE	((__force snd_pcm_format_t) 41)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_U18_3LE	((__force snd_pcm_format_t) 42)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_U18_3BE	((__force snd_pcm_format_t) 43)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_G723_24	((__force snd_pcm_format_t) 44) /* 8 samples in 3 bytes */
+#define	SNDRV_PCM_FORMAT_G723_24_1B	((__force snd_pcm_format_t) 45) /* 1 sample in 1 byte */
+#define	SNDRV_PCM_FORMAT_G723_40	((__force snd_pcm_format_t) 46) /* 8 Samples in 5 bytes */
+#define	SNDRV_PCM_FORMAT_G723_40_1B	((__force snd_pcm_format_t) 47) /* 1 sample in 1 byte */
+#define	SNDRV_PCM_FORMAT_LAST		SNDRV_PCM_FORMAT_G723_40_1B
+
+#ifdef SNDRV_LITTLE_ENDIAN
+#define	SNDRV_PCM_FORMAT_S16		SNDRV_PCM_FORMAT_S16_LE
+#define	SNDRV_PCM_FORMAT_U16		SNDRV_PCM_FORMAT_U16_LE
+#define	SNDRV_PCM_FORMAT_S24		SNDRV_PCM_FORMAT_S24_LE
+#define	SNDRV_PCM_FORMAT_U24		SNDRV_PCM_FORMAT_U24_LE
+#define	SNDRV_PCM_FORMAT_S32		SNDRV_PCM_FORMAT_S32_LE
+#define	SNDRV_PCM_FORMAT_U32		SNDRV_PCM_FORMAT_U32_LE
+#define	SNDRV_PCM_FORMAT_FLOAT		SNDRV_PCM_FORMAT_FLOAT_LE
+#define	SNDRV_PCM_FORMAT_FLOAT64	SNDRV_PCM_FORMAT_FLOAT64_LE
+#define	SNDRV_PCM_FORMAT_IEC958_SUBFRAME SNDRV_PCM_FORMAT_IEC958_SUBFRAME_LE
+#endif
+#ifdef SNDRV_BIG_ENDIAN
+#define	SNDRV_PCM_FORMAT_S16		SNDRV_PCM_FORMAT_S16_BE
+#define	SNDRV_PCM_FORMAT_U16		SNDRV_PCM_FORMAT_U16_BE
+#define	SNDRV_PCM_FORMAT_S24		SNDRV_PCM_FORMAT_S24_BE
+#define	SNDRV_PCM_FORMAT_U24		SNDRV_PCM_FORMAT_U24_BE
+#define	SNDRV_PCM_FORMAT_S32		SNDRV_PCM_FORMAT_S32_BE
+#define	SNDRV_PCM_FORMAT_U32		SNDRV_PCM_FORMAT_U32_BE
+#define	SNDRV_PCM_FORMAT_FLOAT		SNDRV_PCM_FORMAT_FLOAT_BE
+#define	SNDRV_PCM_FORMAT_FLOAT64	SNDRV_PCM_FORMAT_FLOAT64_BE
+#define	SNDRV_PCM_FORMAT_IEC958_SUBFRAME SNDRV_PCM_FORMAT_IEC958_SUBFRAME_BE
+#endif
+
+typedef int __bitwise snd_pcm_subformat_t;
+#define	SNDRV_PCM_SUBFORMAT_STD		((__force snd_pcm_subformat_t) 0)
+#define	SNDRV_PCM_SUBFORMAT_LAST	SNDRV_PCM_SUBFORMAT_STD
+
+#define SNDRV_PCM_INFO_MMAP		0x00000001	/* hardware supports mmap */
+#define SNDRV_PCM_INFO_MMAP_VALID	0x00000002	/* period data are valid during transfer */
+#define SNDRV_PCM_INFO_DOUBLE		0x00000004	/* Double buffering needed for PCM start/stop */
+#define SNDRV_PCM_INFO_BATCH		0x00000010	/* double buffering */
+#define SNDRV_PCM_INFO_INTERLEAVED	0x00000100	/* channels are interleaved */
+#define SNDRV_PCM_INFO_NONINTERLEAVED	0x00000200	/* channels are not interleaved */
+#define SNDRV_PCM_INFO_COMPLEX		0x00000400	/* complex frame organization (mmap only) */
+#define SNDRV_PCM_INFO_BLOCK_TRANSFER	0x00010000	/* hardware transfer block of samples */
+#define SNDRV_PCM_INFO_OVERRANGE	0x00020000	/* hardware supports ADC (capture) overrange detection */
+#define SNDRV_PCM_INFO_RESUME		0x00040000	/* hardware supports stream resume after suspend */
+#define SNDRV_PCM_INFO_PAUSE		0x00080000	/* pause ioctl is supported */
+#define SNDRV_PCM_INFO_HALF_DUPLEX	0x00100000	/* only half duplex */
+#define SNDRV_PCM_INFO_JOINT_DUPLEX	0x00200000	/* playback and capture stream are somewhat correlated */
+#define SNDRV_PCM_INFO_SYNC_START	0x00400000	/* pcm support some kind of sync go */
+#define SNDRV_PCM_INFO_NO_PERIOD_WAKEUP	0x00800000	/* period wakeup can be disabled */
+#define SNDRV_PCM_INFO_FIFO_IN_FRAMES	0x80000000	/* internal kernel flag - FIFO size is in frames */
+
+typedef int __bitwise snd_pcm_state_t;
+#define	SNDRV_PCM_STATE_OPEN		((__force snd_pcm_state_t) 0) /* stream is open */
+#define	SNDRV_PCM_STATE_SETUP		((__force snd_pcm_state_t) 1) /* stream has a setup */
+#define	SNDRV_PCM_STATE_PREPARED	((__force snd_pcm_state_t) 2) /* stream is ready to start */
+#define	SNDRV_PCM_STATE_RUNNING		((__force snd_pcm_state_t) 3) /* stream is running */
+#define	SNDRV_PCM_STATE_XRUN		((__force snd_pcm_state_t) 4) /* stream reached an xrun */
+#define	SNDRV_PCM_STATE_DRAINING	((__force snd_pcm_state_t) 5) /* stream is draining */
+#define	SNDRV_PCM_STATE_PAUSED		((__force snd_pcm_state_t) 6) /* stream is paused */
+#define	SNDRV_PCM_STATE_SUSPENDED	((__force snd_pcm_state_t) 7) /* hardware is suspended */
+#define	SNDRV_PCM_STATE_DISCONNECTED	((__force snd_pcm_state_t) 8) /* hardware is disconnected */
+#define	SNDRV_PCM_STATE_LAST		SNDRV_PCM_STATE_DISCONNECTED
+
+enum {
+	SNDRV_PCM_MMAP_OFFSET_DATA = 0x00000000,
+	SNDRV_PCM_MMAP_OFFSET_STATUS = 0x80000000,
+	SNDRV_PCM_MMAP_OFFSET_CONTROL = 0x81000000,
+};
+
+union snd_pcm_sync_id {
+	unsigned char id[16];
+	unsigned short id16[8];
+	unsigned int id32[4];
+};
+
+struct snd_pcm_info {
+	unsigned int device;		/* RO/WR (control): device number */
+	unsigned int subdevice;		/* RO/WR (control): subdevice number */
+	int stream;			/* RO/WR (control): stream direction */
+	int card;			/* R: card number */
+	unsigned char id[64];		/* ID (user selectable) */
+	unsigned char name[80];		/* name of this device */
+	unsigned char subname[32];	/* subdevice name */
+	int dev_class;			/* SNDRV_PCM_CLASS_* */
+	int dev_subclass;		/* SNDRV_PCM_SUBCLASS_* */
+	unsigned int subdevices_count;
+	unsigned int subdevices_avail;
+	union snd_pcm_sync_id sync;	/* hardware synchronization ID */
+	unsigned char reserved[64];	/* reserved for future... */
+};
+
+typedef int snd_pcm_hw_param_t;
+#define	SNDRV_PCM_HW_PARAM_ACCESS	0	/* Access type */
+#define	SNDRV_PCM_HW_PARAM_FORMAT	1	/* Format */
+#define	SNDRV_PCM_HW_PARAM_SUBFORMAT	2	/* Subformat */
+#define	SNDRV_PCM_HW_PARAM_FIRST_MASK	SNDRV_PCM_HW_PARAM_ACCESS
+#define	SNDRV_PCM_HW_PARAM_LAST_MASK	SNDRV_PCM_HW_PARAM_SUBFORMAT
+
+#define	SNDRV_PCM_HW_PARAM_SAMPLE_BITS	8	/* Bits per sample */
+#define	SNDRV_PCM_HW_PARAM_FRAME_BITS	9	/* Bits per frame */
+#define	SNDRV_PCM_HW_PARAM_CHANNELS	10	/* Channels */
+#define	SNDRV_PCM_HW_PARAM_RATE		11	/* Approx rate */
+#define	SNDRV_PCM_HW_PARAM_PERIOD_TIME	12	/* Approx distance between
+						 * interrupts in us
+						 */
+#define	SNDRV_PCM_HW_PARAM_PERIOD_SIZE	13	/* Approx frames between
+						 * interrupts
+						 */
+#define	SNDRV_PCM_HW_PARAM_PERIOD_BYTES	14	/* Approx bytes between
+						 * interrupts
+						 */
+#define	SNDRV_PCM_HW_PARAM_PERIODS	15	/* Approx interrupts per
+						 * buffer
+						 */
+#define	SNDRV_PCM_HW_PARAM_BUFFER_TIME	16	/* Approx duration of buffer
+						 * in us
+						 */
+#define	SNDRV_PCM_HW_PARAM_BUFFER_SIZE	17	/* Size of buffer in frames */
+#define	SNDRV_PCM_HW_PARAM_BUFFER_BYTES	18	/* Size of buffer in bytes */
+#define	SNDRV_PCM_HW_PARAM_TICK_TIME	19	/* Approx tick duration in us */
+#define	SNDRV_PCM_HW_PARAM_FIRST_INTERVAL	SNDRV_PCM_HW_PARAM_SAMPLE_BITS
+#define	SNDRV_PCM_HW_PARAM_LAST_INTERVAL	SNDRV_PCM_HW_PARAM_TICK_TIME
+
+#define SNDRV_PCM_HW_PARAMS_NORESAMPLE	(1<<0)	/* avoid rate resampling */
+#define SNDRV_PCM_HW_PARAMS_EXPORT_BUFFER	(1<<1)	/* export buffer */
+#define SNDRV_PCM_HW_PARAMS_NO_PERIOD_WAKEUP	(1<<2)	/* disable period wakeups */
+
+struct snd_interval {
+	unsigned int min, max;
+	unsigned int openmin:1,
+		     openmax:1,
+		     integer:1,
+		     empty:1;
+};
+
+#define SNDRV_MASK_MAX	256
+
+struct snd_mask {
+	__u32 bits[(SNDRV_MASK_MAX+31)/32];
+};
+
+struct snd_pcm_hw_params {
+	unsigned int flags;
+	struct snd_mask masks[SNDRV_PCM_HW_PARAM_LAST_MASK - 
+			       SNDRV_PCM_HW_PARAM_FIRST_MASK + 1];
+	struct snd_mask mres[5];	/* reserved masks */
+	struct snd_interval intervals[SNDRV_PCM_HW_PARAM_LAST_INTERVAL -
+				        SNDRV_PCM_HW_PARAM_FIRST_INTERVAL + 1];
+	struct snd_interval ires[9];	/* reserved intervals */
+	unsigned int rmask;		/* W: requested masks */
+	unsigned int cmask;		/* R: changed masks */
+	unsigned int info;		/* R: Info flags for returned setup */
+	unsigned int msbits;		/* R: used most significant bits */
+	unsigned int rate_num;		/* R: rate numerator */
+	unsigned int rate_den;		/* R: rate denominator */
+	snd_pcm_uframes_t fifo_size;	/* R: chip FIFO size in frames */
+	unsigned char reserved[64];	/* reserved for future */
+};
+
+enum {
+	SNDRV_PCM_TSTAMP_NONE = 0,
+	SNDRV_PCM_TSTAMP_ENABLE,
+	SNDRV_PCM_TSTAMP_LAST = SNDRV_PCM_TSTAMP_ENABLE,
+};
+
+struct snd_pcm_sw_params {
+	int tstamp_mode;			/* timestamp mode */
+	unsigned int period_step;
+	unsigned int sleep_min;			/* min ticks to sleep */
+	snd_pcm_uframes_t avail_min;		/* min avail frames for wakeup */
+	snd_pcm_uframes_t xfer_align;		/* obsolete: xfer size need to be a multiple */
+	snd_pcm_uframes_t start_threshold;	/* min hw_avail frames for automatic start */
+	snd_pcm_uframes_t stop_threshold;	/* min avail frames for automatic stop */
+	snd_pcm_uframes_t silence_threshold;	/* min distance from noise for silence filling */
+	snd_pcm_uframes_t silence_size;		/* silence block size */
+	snd_pcm_uframes_t boundary;		/* pointers wrap point */
+	unsigned char reserved[64];		/* reserved for future */
+};
+
+struct snd_pcm_channel_info {
+	unsigned int channel;
+	__kernel_off_t offset;		/* mmap offset */
+	unsigned int first;		/* offset to first sample in bits */
+	unsigned int step;		/* samples distance in bits */
+};
+
+struct snd_pcm_status {
+	snd_pcm_state_t state;		/* stream state */
+	struct timespec trigger_tstamp;	/* time when stream was started/stopped/paused */
+	struct timespec tstamp;		/* reference timestamp */
+	snd_pcm_uframes_t appl_ptr;	/* appl ptr */
+	snd_pcm_uframes_t hw_ptr;	/* hw ptr */
+	snd_pcm_sframes_t delay;	/* current delay in frames */
+	snd_pcm_uframes_t avail;	/* number of frames available */
+	snd_pcm_uframes_t avail_max;	/* max frames available on hw since last status */
+	snd_pcm_uframes_t overrange;	/* count of ADC (capture) overrange detections from last status */
+	snd_pcm_state_t suspended_state; /* suspended stream state */
+	unsigned char reserved[60];	/* must be filled with zero */
+};
+
+struct snd_pcm_mmap_status {
+	snd_pcm_state_t state;		/* RO: state - SNDRV_PCM_STATE_XXXX */
+	int pad1;			/* Needed for 64 bit alignment */
+	snd_pcm_uframes_t hw_ptr;	/* RO: hw ptr (0...boundary-1) */
+	struct timespec tstamp;		/* Timestamp */
+	snd_pcm_state_t suspended_state; /* RO: suspended stream state */
+};
+
+struct snd_pcm_mmap_control {
+	snd_pcm_uframes_t appl_ptr;	/* RW: appl ptr (0...boundary-1) */
+	snd_pcm_uframes_t avail_min;	/* RW: min available frames for wakeup */
+};
+
+#define SNDRV_PCM_SYNC_PTR_HWSYNC	(1<<0)	/* execute hwsync */
+#define SNDRV_PCM_SYNC_PTR_APPL		(1<<1)	/* get appl_ptr from driver (r/w op) */
+#define SNDRV_PCM_SYNC_PTR_AVAIL_MIN	(1<<2)	/* get avail_min from driver */
+
+struct snd_pcm_sync_ptr {
+	unsigned int flags;
+	union {
+		struct snd_pcm_mmap_status status;
+		unsigned char reserved[64];
+	} s;
+	union {
+		struct snd_pcm_mmap_control control;
+		unsigned char reserved[64];
+	} c;
+};
+
+struct snd_xferi {
+	snd_pcm_sframes_t result;
+	void __user *buf;
+	snd_pcm_uframes_t frames;
+};
+
+struct snd_xfern {
+	snd_pcm_sframes_t result;
+	void __user * __user *bufs;
+	snd_pcm_uframes_t frames;
+};
+
+enum {
+	SNDRV_PCM_TSTAMP_TYPE_GETTIMEOFDAY = 0,	/* gettimeofday equivalent */
+	SNDRV_PCM_TSTAMP_TYPE_MONOTONIC,	/* posix_clock_monotonic equivalent */
+	SNDRV_PCM_TSTAMP_TYPE_LAST = SNDRV_PCM_TSTAMP_TYPE_MONOTONIC,
+};
+
+#define SNDRV_PCM_IOCTL_PVERSION	_IOR('A', 0x00, int)
+#define SNDRV_PCM_IOCTL_INFO		_IOR('A', 0x01, struct snd_pcm_info)
+#define SNDRV_PCM_IOCTL_TSTAMP		_IOW('A', 0x02, int)
+#define SNDRV_PCM_IOCTL_TTSTAMP		_IOW('A', 0x03, int)
+#define SNDRV_PCM_IOCTL_HW_REFINE	_IOWR('A', 0x10, struct snd_pcm_hw_params)
+#define SNDRV_PCM_IOCTL_HW_PARAMS	_IOWR('A', 0x11, struct snd_pcm_hw_params)
+#define SNDRV_PCM_IOCTL_HW_FREE		_IO('A', 0x12)
+#define SNDRV_PCM_IOCTL_SW_PARAMS	_IOWR('A', 0x13, struct snd_pcm_sw_params)
+#define SNDRV_PCM_IOCTL_STATUS		_IOR('A', 0x20, struct snd_pcm_status)
+#define SNDRV_PCM_IOCTL_DELAY		_IOR('A', 0x21, snd_pcm_sframes_t)
+#define SNDRV_PCM_IOCTL_HWSYNC		_IO('A', 0x22)
+#define SNDRV_PCM_IOCTL_SYNC_PTR	_IOWR('A', 0x23, struct snd_pcm_sync_ptr)
+#define SNDRV_PCM_IOCTL_CHANNEL_INFO	_IOR('A', 0x32, struct snd_pcm_channel_info)
+#define SNDRV_PCM_IOCTL_PREPARE		_IO('A', 0x40)
+#define SNDRV_PCM_IOCTL_RESET		_IO('A', 0x41)
+#define SNDRV_PCM_IOCTL_START		_IO('A', 0x42)
+#define SNDRV_PCM_IOCTL_DROP		_IO('A', 0x43)
+#define SNDRV_PCM_IOCTL_DRAIN		_IO('A', 0x44)
+#define SNDRV_PCM_IOCTL_PAUSE		_IOW('A', 0x45, int)
+#define SNDRV_PCM_IOCTL_REWIND		_IOW('A', 0x46, snd_pcm_uframes_t)
+#define SNDRV_PCM_IOCTL_RESUME		_IO('A', 0x47)
+#define SNDRV_PCM_IOCTL_XRUN		_IO('A', 0x48)
+#define SNDRV_PCM_IOCTL_FORWARD		_IOW('A', 0x49, snd_pcm_uframes_t)
+#define SNDRV_PCM_IOCTL_WRITEI_FRAMES	_IOW('A', 0x50, struct snd_xferi)
+#define SNDRV_PCM_IOCTL_READI_FRAMES	_IOR('A', 0x51, struct snd_xferi)
+#define SNDRV_PCM_IOCTL_WRITEN_FRAMES	_IOW('A', 0x52, struct snd_xfern)
+#define SNDRV_PCM_IOCTL_READN_FRAMES	_IOR('A', 0x53, struct snd_xfern)
+#define SNDRV_PCM_IOCTL_LINK		_IOW('A', 0x60, int)
+#define SNDRV_PCM_IOCTL_UNLINK		_IO('A', 0x61)
+
+/*****************************************************************************
+ *                                                                           *
+ *                            MIDI v1.0 interface                            *
+ *                                                                           *
+ *****************************************************************************/
+
+/*
+ *  Raw MIDI section - /dev/snd/midi??
+ */
+
+#define SNDRV_RAWMIDI_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 0)
+
+enum {
+	SNDRV_RAWMIDI_STREAM_OUTPUT = 0,
+	SNDRV_RAWMIDI_STREAM_INPUT,
+	SNDRV_RAWMIDI_STREAM_LAST = SNDRV_RAWMIDI_STREAM_INPUT,
+};
+
+#define SNDRV_RAWMIDI_INFO_OUTPUT		0x00000001
+#define SNDRV_RAWMIDI_INFO_INPUT		0x00000002
+#define SNDRV_RAWMIDI_INFO_DUPLEX		0x00000004
+
+struct snd_rawmidi_info {
+	unsigned int device;		/* RO/WR (control): device number */
+	unsigned int subdevice;		/* RO/WR (control): subdevice number */
+	int stream;			/* WR: stream */
+	int card;			/* R: card number */
+	unsigned int flags;		/* SNDRV_RAWMIDI_INFO_XXXX */
+	unsigned char id[64];		/* ID (user selectable) */
+	unsigned char name[80];		/* name of device */
+	unsigned char subname[32];	/* name of active or selected subdevice */
+	unsigned int subdevices_count;
+	unsigned int subdevices_avail;
+	unsigned char reserved[64];	/* reserved for future use */
+};
+
+struct snd_rawmidi_params {
+	int stream;
+	size_t buffer_size;		/* queue size in bytes */
+	size_t avail_min;		/* minimum avail bytes for wakeup */
+	unsigned int no_active_sensing: 1; /* do not send active sensing byte in close() */
+	unsigned char reserved[16];	/* reserved for future use */
+};
+
+struct snd_rawmidi_status {
+	int stream;
+	struct timespec tstamp;		/* Timestamp */
+	size_t avail;			/* available bytes */
+	size_t xruns;			/* count of overruns since last status (in bytes) */
+	unsigned char reserved[16];	/* reserved for future use */
+};
+
+#define SNDRV_RAWMIDI_IOCTL_PVERSION	_IOR('W', 0x00, int)
+#define SNDRV_RAWMIDI_IOCTL_INFO	_IOR('W', 0x01, struct snd_rawmidi_info)
+#define SNDRV_RAWMIDI_IOCTL_PARAMS	_IOWR('W', 0x10, struct snd_rawmidi_params)
+#define SNDRV_RAWMIDI_IOCTL_STATUS	_IOWR('W', 0x20, struct snd_rawmidi_status)
+#define SNDRV_RAWMIDI_IOCTL_DROP	_IOW('W', 0x30, int)
+#define SNDRV_RAWMIDI_IOCTL_DRAIN	_IOW('W', 0x31, int)
+
+/*
+ *  Timer section - /dev/snd/timer
+ */
+
+#define SNDRV_TIMER_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 6)
+
+enum {
+	SNDRV_TIMER_CLASS_NONE = -1,
+	SNDRV_TIMER_CLASS_SLAVE = 0,
+	SNDRV_TIMER_CLASS_GLOBAL,
+	SNDRV_TIMER_CLASS_CARD,
+	SNDRV_TIMER_CLASS_PCM,
+	SNDRV_TIMER_CLASS_LAST = SNDRV_TIMER_CLASS_PCM,
+};
+
+/* slave timer classes */
+enum {
+	SNDRV_TIMER_SCLASS_NONE = 0,
+	SNDRV_TIMER_SCLASS_APPLICATION,
+	SNDRV_TIMER_SCLASS_SEQUENCER,		/* alias */
+	SNDRV_TIMER_SCLASS_OSS_SEQUENCER,	/* alias */
+	SNDRV_TIMER_SCLASS_LAST = SNDRV_TIMER_SCLASS_OSS_SEQUENCER,
+};
+
+/* global timers (device member) */
+#define SNDRV_TIMER_GLOBAL_SYSTEM	0
+#define SNDRV_TIMER_GLOBAL_RTC		1
+#define SNDRV_TIMER_GLOBAL_HPET		2
+#define SNDRV_TIMER_GLOBAL_HRTIMER	3
+
+/* info flags */
+#define SNDRV_TIMER_FLG_SLAVE		(1<<0)	/* cannot be controlled */
+
+struct snd_timer_id {
+	int dev_class;
+	int dev_sclass;
+	int card;
+	int device;
+	int subdevice;
+};
+
+struct snd_timer_ginfo {
+	struct snd_timer_id tid;	/* requested timer ID */
+	unsigned int flags;		/* timer flags - SNDRV_TIMER_FLG_* */
+	int card;			/* card number */
+	unsigned char id[64];		/* timer identification */
+	unsigned char name[80];		/* timer name */
+	unsigned long reserved0;	/* reserved for future use */
+	unsigned long resolution;	/* average period resolution in ns */
+	unsigned long resolution_min;	/* minimal period resolution in ns */
+	unsigned long resolution_max;	/* maximal period resolution in ns */
+	unsigned int clients;		/* active timer clients */
+	unsigned char reserved[32];
+};
+
+struct snd_timer_gparams {
+	struct snd_timer_id tid;	/* requested timer ID */
+	unsigned long period_num;	/* requested precise period duration (in seconds) - numerator */
+	unsigned long period_den;	/* requested precise period duration (in seconds) - denominator */
+	unsigned char reserved[32];
+};
+
+struct snd_timer_gstatus {
+	struct snd_timer_id tid;	/* requested timer ID */
+	unsigned long resolution;	/* current period resolution in ns */
+	unsigned long resolution_num;	/* precise current period resolution (in seconds) - numerator */
+	unsigned long resolution_den;	/* precise current period resolution (in seconds) - denominator */
+	unsigned char reserved[32];
+};
+
+struct snd_timer_select {
+	struct snd_timer_id id;	/* bind to timer ID */
+	unsigned char reserved[32];	/* reserved */
+};
+
+struct snd_timer_info {
+	unsigned int flags;		/* timer flags - SNDRV_TIMER_FLG_* */
+	int card;			/* card number */
+	unsigned char id[64];		/* timer identificator */
+	unsigned char name[80];		/* timer name */
+	unsigned long reserved0;	/* reserved for future use */
+	unsigned long resolution;	/* average period resolution in ns */
+	unsigned char reserved[64];	/* reserved */
+};
+
+#define SNDRV_TIMER_PSFLG_AUTO		(1<<0)	/* auto start, otherwise one-shot */
+#define SNDRV_TIMER_PSFLG_EXCLUSIVE	(1<<1)	/* exclusive use, precise start/stop/pause/continue */
+#define SNDRV_TIMER_PSFLG_EARLY_EVENT	(1<<2)	/* write early event to the poll queue */
+
+struct snd_timer_params {
+	unsigned int flags;		/* flags - SNDRV_MIXER_PSFLG_* */
+	unsigned int ticks;		/* requested resolution in ticks */
+	unsigned int queue_size;	/* total size of queue (32-1024) */
+	unsigned int reserved0;		/* reserved, was: failure locations */
+	unsigned int filter;		/* event filter (bitmask of SNDRV_TIMER_EVENT_*) */
+	unsigned char reserved[60];	/* reserved */
+};
+
+struct snd_timer_status {
+	struct timespec tstamp;		/* Timestamp - last update */
+	unsigned int resolution;	/* current period resolution in ns */
+	unsigned int lost;		/* counter of master tick lost */
+	unsigned int overrun;		/* count of read queue overruns */
+	unsigned int queue;		/* used queue size */
+	unsigned char reserved[64];	/* reserved */
+};
+
+#define SNDRV_TIMER_IOCTL_PVERSION	_IOR('T', 0x00, int)
+#define SNDRV_TIMER_IOCTL_NEXT_DEVICE	_IOWR('T', 0x01, struct snd_timer_id)
+#define SNDRV_TIMER_IOCTL_TREAD		_IOW('T', 0x02, int)
+#define SNDRV_TIMER_IOCTL_GINFO		_IOWR('T', 0x03, struct snd_timer_ginfo)
+#define SNDRV_TIMER_IOCTL_GPARAMS	_IOW('T', 0x04, struct snd_timer_gparams)
+#define SNDRV_TIMER_IOCTL_GSTATUS	_IOWR('T', 0x05, struct snd_timer_gstatus)
+#define SNDRV_TIMER_IOCTL_SELECT	_IOW('T', 0x10, struct snd_timer_select)
+#define SNDRV_TIMER_IOCTL_INFO		_IOR('T', 0x11, struct snd_timer_info)
+#define SNDRV_TIMER_IOCTL_PARAMS	_IOW('T', 0x12, struct snd_timer_params)
+#define SNDRV_TIMER_IOCTL_STATUS	_IOR('T', 0x14, struct snd_timer_status)
+/* The following four ioctls are changed since 1.0.9 due to confliction */
+#define SNDRV_TIMER_IOCTL_START		_IO('T', 0xa0)
+#define SNDRV_TIMER_IOCTL_STOP		_IO('T', 0xa1)
+#define SNDRV_TIMER_IOCTL_CONTINUE	_IO('T', 0xa2)
+#define SNDRV_TIMER_IOCTL_PAUSE		_IO('T', 0xa3)
+
+struct snd_timer_read {
+	unsigned int resolution;
+	unsigned int ticks;
+};
+
+enum {
+	SNDRV_TIMER_EVENT_RESOLUTION = 0,	/* val = resolution in ns */
+	SNDRV_TIMER_EVENT_TICK,			/* val = ticks */
+	SNDRV_TIMER_EVENT_START,		/* val = resolution in ns */
+	SNDRV_TIMER_EVENT_STOP,			/* val = 0 */
+	SNDRV_TIMER_EVENT_CONTINUE,		/* val = resolution in ns */
+	SNDRV_TIMER_EVENT_PAUSE,		/* val = 0 */
+	SNDRV_TIMER_EVENT_EARLY,		/* val = 0, early event */
+	SNDRV_TIMER_EVENT_SUSPEND,		/* val = 0 */
+	SNDRV_TIMER_EVENT_RESUME,		/* val = resolution in ns */
+	/* master timer events for slave timer instances */
+	SNDRV_TIMER_EVENT_MSTART = SNDRV_TIMER_EVENT_START + 10,
+	SNDRV_TIMER_EVENT_MSTOP = SNDRV_TIMER_EVENT_STOP + 10,
+	SNDRV_TIMER_EVENT_MCONTINUE = SNDRV_TIMER_EVENT_CONTINUE + 10,
+	SNDRV_TIMER_EVENT_MPAUSE = SNDRV_TIMER_EVENT_PAUSE + 10,
+	SNDRV_TIMER_EVENT_MSUSPEND = SNDRV_TIMER_EVENT_SUSPEND + 10,
+	SNDRV_TIMER_EVENT_MRESUME = SNDRV_TIMER_EVENT_RESUME + 10,
+};
+
+struct snd_timer_tread {
+	int event;
+	struct timespec tstamp;
+	unsigned int val;
+};
+
+/****************************************************************************
+ *                                                                          *
+ *        Section for driver control interface - /dev/snd/control?          *
+ *                                                                          *
+ ****************************************************************************/
+
+#define SNDRV_CTL_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 7)
+
+struct snd_ctl_card_info {
+	int card;			/* card number */
+	int pad;			/* reserved for future (was type) */
+	unsigned char id[16];		/* ID of card (user selectable) */
+	unsigned char driver[16];	/* Driver name */
+	unsigned char name[32];		/* Short name of soundcard */
+	unsigned char longname[80];	/* name + info text about soundcard */
+	unsigned char reserved_[16];	/* reserved for future (was ID of mixer) */
+	unsigned char mixername[80];	/* visual mixer identification */
+	unsigned char components[128];	/* card components / fine identification, delimited with one space (AC97 etc..) */
+};
+
+typedef int __bitwise snd_ctl_elem_type_t;
+#define	SNDRV_CTL_ELEM_TYPE_NONE	((__force snd_ctl_elem_type_t) 0) /* invalid */
+#define	SNDRV_CTL_ELEM_TYPE_BOOLEAN	((__force snd_ctl_elem_type_t) 1) /* boolean type */
+#define	SNDRV_CTL_ELEM_TYPE_INTEGER	((__force snd_ctl_elem_type_t) 2) /* integer type */
+#define	SNDRV_CTL_ELEM_TYPE_ENUMERATED	((__force snd_ctl_elem_type_t) 3) /* enumerated type */
+#define	SNDRV_CTL_ELEM_TYPE_BYTES	((__force snd_ctl_elem_type_t) 4) /* byte array */
+#define	SNDRV_CTL_ELEM_TYPE_IEC958	((__force snd_ctl_elem_type_t) 5) /* IEC958 (S/PDIF) setup */
+#define	SNDRV_CTL_ELEM_TYPE_INTEGER64	((__force snd_ctl_elem_type_t) 6) /* 64-bit integer type */
+#define	SNDRV_CTL_ELEM_TYPE_LAST	SNDRV_CTL_ELEM_TYPE_INTEGER64
+
+typedef int __bitwise snd_ctl_elem_iface_t;
+#define	SNDRV_CTL_ELEM_IFACE_CARD	((__force snd_ctl_elem_iface_t) 0) /* global control */
+#define	SNDRV_CTL_ELEM_IFACE_HWDEP	((__force snd_ctl_elem_iface_t) 1) /* hardware dependent device */
+#define	SNDRV_CTL_ELEM_IFACE_MIXER	((__force snd_ctl_elem_iface_t) 2) /* virtual mixer device */
+#define	SNDRV_CTL_ELEM_IFACE_PCM	((__force snd_ctl_elem_iface_t) 3) /* PCM device */
+#define	SNDRV_CTL_ELEM_IFACE_RAWMIDI	((__force snd_ctl_elem_iface_t) 4) /* RawMidi device */
+#define	SNDRV_CTL_ELEM_IFACE_TIMER	((__force snd_ctl_elem_iface_t) 5) /* timer device */
+#define	SNDRV_CTL_ELEM_IFACE_SEQUENCER	((__force snd_ctl_elem_iface_t) 6) /* sequencer client */
+#define	SNDRV_CTL_ELEM_IFACE_LAST	SNDRV_CTL_ELEM_IFACE_SEQUENCER
+
+#define SNDRV_CTL_ELEM_ACCESS_READ		(1<<0)
+#define SNDRV_CTL_ELEM_ACCESS_WRITE		(1<<1)
+#define SNDRV_CTL_ELEM_ACCESS_READWRITE		(SNDRV_CTL_ELEM_ACCESS_READ|SNDRV_CTL_ELEM_ACCESS_WRITE)
+#define SNDRV_CTL_ELEM_ACCESS_VOLATILE		(1<<2)	/* control value may be changed without a notification */
+#define SNDRV_CTL_ELEM_ACCESS_TIMESTAMP		(1<<3)	/* when was control changed */
+#define SNDRV_CTL_ELEM_ACCESS_TLV_READ		(1<<4)	/* TLV read is possible */
+#define SNDRV_CTL_ELEM_ACCESS_TLV_WRITE		(1<<5)	/* TLV write is possible */
+#define SNDRV_CTL_ELEM_ACCESS_TLV_READWRITE	(SNDRV_CTL_ELEM_ACCESS_TLV_READ|SNDRV_CTL_ELEM_ACCESS_TLV_WRITE)
+#define SNDRV_CTL_ELEM_ACCESS_TLV_COMMAND	(1<<6)	/* TLV command is possible */
+#define SNDRV_CTL_ELEM_ACCESS_INACTIVE		(1<<8)	/* control does actually nothing, but may be updated */
+#define SNDRV_CTL_ELEM_ACCESS_LOCK		(1<<9)	/* write lock */
+#define SNDRV_CTL_ELEM_ACCESS_OWNER		(1<<10)	/* write lock owner */
+#define SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK	(1<<28)	/* kernel use a TLV callback */ 
+#define SNDRV_CTL_ELEM_ACCESS_USER		(1<<29) /* user space element */
+/* bits 30 and 31 are obsoleted (for indirect access) */
+
+/* for further details see the ACPI and PCI power management specification */
+#define SNDRV_CTL_POWER_D0		0x0000	/* full On */
+#define SNDRV_CTL_POWER_D1		0x0100	/* partial On */
+#define SNDRV_CTL_POWER_D2		0x0200	/* partial On */
+#define SNDRV_CTL_POWER_D3		0x0300	/* Off */
+#define SNDRV_CTL_POWER_D3hot		(SNDRV_CTL_POWER_D3|0x0000)	/* Off, with power */
+#define SNDRV_CTL_POWER_D3cold		(SNDRV_CTL_POWER_D3|0x0001)	/* Off, without power */
+
+struct snd_ctl_elem_id {
+	unsigned int numid;		/* numeric identifier, zero = invalid */
+	snd_ctl_elem_iface_t iface;	/* interface identifier */
+	unsigned int device;		/* device/client number */
+	unsigned int subdevice;		/* subdevice (substream) number */
+	unsigned char name[44];		/* ASCII name of item */
+	unsigned int index;		/* index of item */
+};
+
+struct snd_ctl_elem_list {
+	unsigned int offset;		/* W: first element ID to get */
+	unsigned int space;		/* W: count of element IDs to get */
+	unsigned int used;		/* R: count of element IDs set */
+	unsigned int count;		/* R: count of all elements */
+	struct snd_ctl_elem_id __user *pids; /* R: IDs */
+	unsigned char reserved[50];
+};
+
+struct snd_ctl_elem_info {
+	struct snd_ctl_elem_id id;	/* W: element ID */
+	snd_ctl_elem_type_t type;	/* R: value type - SNDRV_CTL_ELEM_TYPE_* */
+	unsigned int access;		/* R: value access (bitmask) - SNDRV_CTL_ELEM_ACCESS_* */
+	unsigned int count;		/* count of values */
+	__kernel_pid_t owner;		/* owner's PID of this control */
+	union {
+		struct {
+			long min;		/* R: minimum value */
+			long max;		/* R: maximum value */
+			long step;		/* R: step (0 variable) */
+		} integer;
+		struct {
+			long long min;		/* R: minimum value */
+			long long max;		/* R: maximum value */
+			long long step;		/* R: step (0 variable) */
+		} integer64;
+		struct {
+			unsigned int items;	/* R: number of items */
+			unsigned int item;	/* W: item number */
+			char name[64];		/* R: value name */
+			__u64 names_ptr;	/* W: names list (ELEM_ADD only) */
+			unsigned int names_length;
+		} enumerated;
+		unsigned char reserved[128];
+	} value;
+	union {
+		unsigned short d[4];		/* dimensions */
+		unsigned short *d_ptr;		/* indirect - obsoleted */
+	} dimen;
+	unsigned char reserved[64-4*sizeof(unsigned short)];
+};
+
+struct snd_ctl_elem_value {
+	struct snd_ctl_elem_id id;	/* W: element ID */
+	unsigned int indirect: 1;	/* W: indirect access - obsoleted */
+	union {
+		union {
+			long value[128];
+			long *value_ptr;	/* obsoleted */
+		} integer;
+		union {
+			long long value[64];
+			long long *value_ptr;	/* obsoleted */
+		} integer64;
+		union {
+			unsigned int item[128];
+			unsigned int *item_ptr;	/* obsoleted */
+		} enumerated;
+		union {
+			unsigned char data[512];
+			unsigned char *data_ptr;	/* obsoleted */
+		} bytes;
+		struct snd_aes_iec958 iec958;
+	} value;		/* RO */
+	struct timespec tstamp;
+	unsigned char reserved[128-sizeof(struct timespec)];
+};
+
+struct snd_ctl_tlv {
+	unsigned int numid;	/* control element numeric identification */
+	unsigned int length;	/* in bytes aligned to 4 */
+	unsigned int tlv[0];	/* first TLV */
+};
+
+#define SNDRV_CTL_IOCTL_PVERSION	_IOR('U', 0x00, int)
+#define SNDRV_CTL_IOCTL_CARD_INFO	_IOR('U', 0x01, struct snd_ctl_card_info)
+#define SNDRV_CTL_IOCTL_ELEM_LIST	_IOWR('U', 0x10, struct snd_ctl_elem_list)
+#define SNDRV_CTL_IOCTL_ELEM_INFO	_IOWR('U', 0x11, struct snd_ctl_elem_info)
+#define SNDRV_CTL_IOCTL_ELEM_READ	_IOWR('U', 0x12, struct snd_ctl_elem_value)
+#define SNDRV_CTL_IOCTL_ELEM_WRITE	_IOWR('U', 0x13, struct snd_ctl_elem_value)
+#define SNDRV_CTL_IOCTL_ELEM_LOCK	_IOW('U', 0x14, struct snd_ctl_elem_id)
+#define SNDRV_CTL_IOCTL_ELEM_UNLOCK	_IOW('U', 0x15, struct snd_ctl_elem_id)
+#define SNDRV_CTL_IOCTL_SUBSCRIBE_EVENTS _IOWR('U', 0x16, int)
+#define SNDRV_CTL_IOCTL_ELEM_ADD	_IOWR('U', 0x17, struct snd_ctl_elem_info)
+#define SNDRV_CTL_IOCTL_ELEM_REPLACE	_IOWR('U', 0x18, struct snd_ctl_elem_info)
+#define SNDRV_CTL_IOCTL_ELEM_REMOVE	_IOWR('U', 0x19, struct snd_ctl_elem_id)
+#define SNDRV_CTL_IOCTL_TLV_READ	_IOWR('U', 0x1a, struct snd_ctl_tlv)
+#define SNDRV_CTL_IOCTL_TLV_WRITE	_IOWR('U', 0x1b, struct snd_ctl_tlv)
+#define SNDRV_CTL_IOCTL_TLV_COMMAND	_IOWR('U', 0x1c, struct snd_ctl_tlv)
+#define SNDRV_CTL_IOCTL_HWDEP_NEXT_DEVICE _IOWR('U', 0x20, int)
+#define SNDRV_CTL_IOCTL_HWDEP_INFO	_IOR('U', 0x21, struct snd_hwdep_info)
+#define SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE	_IOR('U', 0x30, int)
+#define SNDRV_CTL_IOCTL_PCM_INFO	_IOWR('U', 0x31, struct snd_pcm_info)
+#define SNDRV_CTL_IOCTL_PCM_PREFER_SUBDEVICE _IOW('U', 0x32, int)
+#define SNDRV_CTL_IOCTL_RAWMIDI_NEXT_DEVICE _IOWR('U', 0x40, int)
+#define SNDRV_CTL_IOCTL_RAWMIDI_INFO	_IOWR('U', 0x41, struct snd_rawmidi_info)
+#define SNDRV_CTL_IOCTL_RAWMIDI_PREFER_SUBDEVICE _IOW('U', 0x42, int)
+#define SNDRV_CTL_IOCTL_POWER		_IOWR('U', 0xd0, int)
+#define SNDRV_CTL_IOCTL_POWER_STATE	_IOR('U', 0xd1, int)
+
+/*
+ *  Read interface.
+ */
+
+enum sndrv_ctl_event_type {
+	SNDRV_CTL_EVENT_ELEM = 0,
+	SNDRV_CTL_EVENT_LAST = SNDRV_CTL_EVENT_ELEM,
+};
+
+#define SNDRV_CTL_EVENT_MASK_VALUE	(1<<0)	/* element value was changed */
+#define SNDRV_CTL_EVENT_MASK_INFO	(1<<1)	/* element info was changed */
+#define SNDRV_CTL_EVENT_MASK_ADD	(1<<2)	/* element was added */
+#define SNDRV_CTL_EVENT_MASK_TLV	(1<<3)	/* element TLV tree was changed */
+#define SNDRV_CTL_EVENT_MASK_REMOVE	(~0U)	/* element was removed */
+
+struct snd_ctl_event {
+	int type;	/* event type - SNDRV_CTL_EVENT_* */
+	union {
+		struct {
+			unsigned int mask;
+			struct snd_ctl_elem_id id;
+		} elem;
+		unsigned char data8[60];
+	} data;
+};
+
+/*
+ *  Control names
+ */
+
+#define SNDRV_CTL_NAME_NONE				""
+#define SNDRV_CTL_NAME_PLAYBACK				"Playback "
+#define SNDRV_CTL_NAME_CAPTURE				"Capture "
+
+#define SNDRV_CTL_NAME_IEC958_NONE			""
+#define SNDRV_CTL_NAME_IEC958_SWITCH			"Switch"
+#define SNDRV_CTL_NAME_IEC958_VOLUME			"Volume"
+#define SNDRV_CTL_NAME_IEC958_DEFAULT			"Default"
+#define SNDRV_CTL_NAME_IEC958_MASK			"Mask"
+#define SNDRV_CTL_NAME_IEC958_CON_MASK			"Con Mask"
+#define SNDRV_CTL_NAME_IEC958_PRO_MASK			"Pro Mask"
+#define SNDRV_CTL_NAME_IEC958_PCM_STREAM		"PCM Stream"
+#define SNDRV_CTL_NAME_IEC958(expl,direction,what)	"IEC958 " expl SNDRV_CTL_NAME_##direction SNDRV_CTL_NAME_IEC958_##what
+
+#endif /* __SOUND_ASOUND_H */
diff --git a/include/sound/asound_fm.h b/include/sound/asound_fm.h
new file mode 100644
index 00000000..c2a4b967
--- /dev/null
+++ b/include/sound/asound_fm.h
@@ -0,0 +1,134 @@
+#ifndef __SOUND_ASOUND_FM_H
+#define __SOUND_ASOUND_FM_H
+
+/*
+ *  Advanced Linux Sound Architecture - ALSA
+ *
+ *  Interface file between ALSA driver & user space
+ *  Copyright (c) 1994-98 by Jaroslav Kysela <perex@perex.cz>,
+ *                           4Front Technologies
+ *
+ *  Direct FM control
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#define SNDRV_DM_FM_MODE_OPL2	0x00
+#define SNDRV_DM_FM_MODE_OPL3	0x01
+
+struct snd_dm_fm_info {
+	unsigned char fm_mode;		/* OPL mode, see SNDRV_DM_FM_MODE_XXX */
+	unsigned char rhythm;		/* percussion mode flag */
+};
+
+/*
+ *  Data structure composing an FM "note" or sound event.
+ */
+
+struct snd_dm_fm_voice {
+	unsigned char op;		/* operator cell (0 or 1) */
+	unsigned char voice;		/* FM voice (0 to 17) */
+
+	unsigned char am;		/* amplitude modulation */
+	unsigned char vibrato;		/* vibrato effect */
+	unsigned char do_sustain;	/* sustain phase */
+	unsigned char kbd_scale;	/* keyboard scaling */
+	unsigned char harmonic;		/* 4 bits: harmonic and multiplier */
+	unsigned char scale_level;	/* 2 bits: decrease output freq rises */
+	unsigned char volume;		/* 6 bits: volume */
+
+	unsigned char attack;		/* 4 bits: attack rate */
+	unsigned char decay;		/* 4 bits: decay rate */
+	unsigned char sustain;		/* 4 bits: sustain level */
+	unsigned char release;		/* 4 bits: release rate */
+
+	unsigned char feedback;		/* 3 bits: feedback for op0 */
+	unsigned char connection;	/* 0 for serial, 1 for parallel */
+	unsigned char left;		/* stereo left */
+	unsigned char right;		/* stereo right */
+	unsigned char waveform;		/* 3 bits: waveform shape */
+};
+
+/*
+ *  This describes an FM note by its voice, octave, frequency number (10bit)
+ *  and key on/off.
+ */
+
+struct snd_dm_fm_note {
+	unsigned char voice;	/* 0-17 voice channel */
+	unsigned char octave;	/* 3 bits: what octave to play */
+	unsigned int fnum;	/* 10 bits: frequency number */
+	unsigned char key_on;	/* set for active, clear for silent */
+};
+
+/*
+ *  FM parameters that apply globally to all voices, and thus are not "notes"
+ */
+
+struct snd_dm_fm_params {
+	unsigned char am_depth;		/* amplitude modulation depth (1=hi) */
+	unsigned char vib_depth;	/* vibrato depth (1=hi) */
+	unsigned char kbd_split;	/* keyboard split */
+	unsigned char rhythm;		/* percussion mode select */
+
+	/* This block is the percussion instrument data */
+	unsigned char bass;
+	unsigned char snare;
+	unsigned char tomtom;
+	unsigned char cymbal;
+	unsigned char hihat;
+};
+
+/*
+ *  FM mode ioctl settings
+ */
+
+#define SNDRV_DM_FM_IOCTL_INFO		_IOR('H', 0x20, struct snd_dm_fm_info)
+#define SNDRV_DM_FM_IOCTL_RESET		_IO ('H', 0x21)
+#define SNDRV_DM_FM_IOCTL_PLAY_NOTE	_IOW('H', 0x22, struct snd_dm_fm_note)
+#define SNDRV_DM_FM_IOCTL_SET_VOICE	_IOW('H', 0x23, struct snd_dm_fm_voice)
+#define SNDRV_DM_FM_IOCTL_SET_PARAMS	_IOW('H', 0x24, struct snd_dm_fm_params)
+#define SNDRV_DM_FM_IOCTL_SET_MODE	_IOW('H', 0x25, int)
+/* for OPL3 only */
+#define SNDRV_DM_FM_IOCTL_SET_CONNECTION	_IOW('H', 0x26, int)
+/* SBI patch management */
+#define SNDRV_DM_FM_IOCTL_CLEAR_PATCHES	_IO ('H', 0x40)
+
+#define SNDRV_DM_FM_OSS_IOCTL_RESET		0x20
+#define SNDRV_DM_FM_OSS_IOCTL_PLAY_NOTE		0x21
+#define SNDRV_DM_FM_OSS_IOCTL_SET_VOICE		0x22
+#define SNDRV_DM_FM_OSS_IOCTL_SET_PARAMS	0x23
+#define SNDRV_DM_FM_OSS_IOCTL_SET_MODE		0x24
+#define SNDRV_DM_FM_OSS_IOCTL_SET_OPL		0x25
+
+/*
+ * Patch Record - fixed size for write
+ */
+
+#define FM_KEY_SBI	"SBI\032"
+#define FM_KEY_2OP	"2OP\032"
+#define FM_KEY_4OP	"4OP\032"
+
+struct sbi_patch {
+	unsigned char prog;
+	unsigned char bank;
+	char key[4];
+	char name[25];
+	char extension[7];
+	unsigned char data[32];
+};
+
+#endif /* __SOUND_ASOUND_FM_H */
diff --git a/include/sound/asoundef.h b/include/sound/asoundef.h
new file mode 100644
index 00000000..20ebf329
--- /dev/null
+++ b/include/sound/asoundef.h
@@ -0,0 +1,284 @@
+#ifndef __SOUND_ASOUNDEF_H
+#define __SOUND_ASOUNDEF_H
+
+/*
+ *  Advanced Linux Sound Architecture - ALSA - Driver
+ *  Copyright (c) 1994-2000 by Jaroslav Kysela <perex@perex.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+/****************************************************************************
+ *                                                                          *
+ *        Digital audio interface					    *
+ *                                                                          *
+ ****************************************************************************/
+
+/* AES/IEC958 channel status bits */
+#define IEC958_AES0_PROFESSIONAL	(1<<0)	/* 0 = consumer, 1 = professional */
+#define IEC958_AES0_NONAUDIO		(1<<1)	/* 0 = audio, 1 = non-audio */
+#define IEC958_AES0_PRO_EMPHASIS	(7<<2)	/* mask - emphasis */
+#define IEC958_AES0_PRO_EMPHASIS_NOTID	(0<<2)	/* emphasis not indicated */
+#define IEC958_AES0_PRO_EMPHASIS_NONE	(1<<2)	/* none emphasis */
+#define IEC958_AES0_PRO_EMPHASIS_5015	(3<<2)	/* 50/15us emphasis */
+#define IEC958_AES0_PRO_EMPHASIS_CCITT	(7<<2)	/* CCITT J.17 emphasis */
+#define IEC958_AES0_PRO_FREQ_UNLOCKED	(1<<5)	/* source sample frequency: 0 = locked, 1 = unlocked */
+#define IEC958_AES0_PRO_FS		(3<<6)	/* mask - sample frequency */
+#define IEC958_AES0_PRO_FS_NOTID	(0<<6)	/* fs not indicated */
+#define IEC958_AES0_PRO_FS_44100	(1<<6)	/* 44.1kHz */
+#define IEC958_AES0_PRO_FS_48000	(2<<6)	/* 48kHz */
+#define IEC958_AES0_PRO_FS_32000	(3<<6)	/* 32kHz */
+#define IEC958_AES0_CON_NOT_COPYRIGHT	(1<<2)	/* 0 = copyright, 1 = not copyright */
+#define IEC958_AES0_CON_EMPHASIS	(7<<3)	/* mask - emphasis */
+#define IEC958_AES0_CON_EMPHASIS_NONE	(0<<3)	/* none emphasis */
+#define IEC958_AES0_CON_EMPHASIS_5015	(1<<3)	/* 50/15us emphasis */
+#define IEC958_AES0_CON_MODE		(3<<6)	/* mask - mode */
+#define IEC958_AES1_PRO_MODE		(15<<0)	/* mask - channel mode */
+#define IEC958_AES1_PRO_MODE_NOTID	(0<<0)	/* not indicated */
+#define IEC958_AES1_PRO_MODE_STEREOPHONIC (2<<0) /* stereophonic - ch A is left */
+#define IEC958_AES1_PRO_MODE_SINGLE	(4<<0)	/* single channel */
+#define IEC958_AES1_PRO_MODE_TWO	(8<<0)	/* two channels */
+#define IEC958_AES1_PRO_MODE_PRIMARY	(12<<0)	/* primary/secondary */
+#define IEC958_AES1_PRO_MODE_BYTE3	(15<<0)	/* vector to byte 3 */
+#define IEC958_AES1_PRO_USERBITS	(15<<4)	/* mask - user bits */
+#define IEC958_AES1_PRO_USERBITS_NOTID	(0<<4)	/* not indicated */
+#define IEC958_AES1_PRO_USERBITS_192	(8<<4)	/* 192-bit structure */
+#define IEC958_AES1_PRO_USERBITS_UDEF	(12<<4)	/* user defined application */
+#define IEC958_AES1_CON_CATEGORY	0x7f
+#define IEC958_AES1_CON_GENERAL		0x00
+#define IEC958_AES1_CON_LASEROPT_MASK	0x07
+#define IEC958_AES1_CON_LASEROPT_ID	0x01
+#define IEC958_AES1_CON_IEC908_CD	(IEC958_AES1_CON_LASEROPT_ID|0x00)
+#define IEC958_AES1_CON_NON_IEC908_CD	(IEC958_AES1_CON_LASEROPT_ID|0x08)
+#define IEC958_AES1_CON_MINI_DISC	(IEC958_AES1_CON_LASEROPT_ID|0x48)
+#define IEC958_AES1_CON_DVD		(IEC958_AES1_CON_LASEROPT_ID|0x18)
+#define IEC958_AES1_CON_LASTEROPT_OTHER	(IEC958_AES1_CON_LASEROPT_ID|0x78)
+#define IEC958_AES1_CON_DIGDIGCONV_MASK 0x07
+#define IEC958_AES1_CON_DIGDIGCONV_ID	0x02
+#define IEC958_AES1_CON_PCM_CODER	(IEC958_AES1_CON_DIGDIGCONV_ID|0x00)
+#define IEC958_AES1_CON_MIXER		(IEC958_AES1_CON_DIGDIGCONV_ID|0x10)
+#define IEC958_AES1_CON_RATE_CONVERTER	(IEC958_AES1_CON_DIGDIGCONV_ID|0x18)
+#define IEC958_AES1_CON_SAMPLER		(IEC958_AES1_CON_DIGDIGCONV_ID|0x20)
+#define IEC958_AES1_CON_DSP		(IEC958_AES1_CON_DIGDIGCONV_ID|0x28)
+#define IEC958_AES1_CON_DIGDIGCONV_OTHER (IEC958_AES1_CON_DIGDIGCONV_ID|0x78)
+#define IEC958_AES1_CON_MAGNETIC_MASK	0x07
+#define IEC958_AES1_CON_MAGNETIC_ID	0x03
+#define IEC958_AES1_CON_DAT		(IEC958_AES1_CON_MAGNETIC_ID|0x00)
+#define IEC958_AES1_CON_VCR		(IEC958_AES1_CON_MAGNETIC_ID|0x08)
+#define IEC958_AES1_CON_DCC		(IEC958_AES1_CON_MAGNETIC_ID|0x40)
+#define IEC958_AES1_CON_MAGNETIC_DISC	(IEC958_AES1_CON_MAGNETIC_ID|0x18)
+#define IEC958_AES1_CON_MAGNETIC_OTHER	(IEC958_AES1_CON_MAGNETIC_ID|0x78)
+#define IEC958_AES1_CON_BROADCAST1_MASK 0x07
+#define IEC958_AES1_CON_BROADCAST1_ID	0x04
+#define IEC958_AES1_CON_DAB_JAPAN	(IEC958_AES1_CON_BROADCAST1_ID|0x00)
+#define IEC958_AES1_CON_DAB_EUROPE	(IEC958_AES1_CON_BROADCAST1_ID|0x08)
+#define IEC958_AES1_CON_DAB_USA		(IEC958_AES1_CON_BROADCAST1_ID|0x60)
+#define IEC958_AES1_CON_SOFTWARE	(IEC958_AES1_CON_BROADCAST1_ID|0x40)
+#define IEC958_AES1_CON_IEC62105	(IEC958_AES1_CON_BROADCAST1_ID|0x20)
+#define IEC958_AES1_CON_BROADCAST1_OTHER (IEC958_AES1_CON_BROADCAST1_ID|0x78)
+#define IEC958_AES1_CON_BROADCAST2_MASK 0x0f
+#define IEC958_AES1_CON_BROADCAST2_ID	0x0e
+#define IEC958_AES1_CON_MUSICAL_MASK	0x07
+#define IEC958_AES1_CON_MUSICAL_ID	0x05
+#define IEC958_AES1_CON_SYNTHESIZER	(IEC958_AES1_CON_MUSICAL_ID|0x00)
+#define IEC958_AES1_CON_MICROPHONE	(IEC958_AES1_CON_MUSICAL_ID|0x08)
+#define IEC958_AES1_CON_MUSICAL_OTHER	(IEC958_AES1_CON_MUSICAL_ID|0x78)
+#define IEC958_AES1_CON_ADC_MASK	0x1f
+#define IEC958_AES1_CON_ADC_ID		0x06
+#define IEC958_AES1_CON_ADC		(IEC958_AES1_CON_ADC_ID|0x00)
+#define IEC958_AES1_CON_ADC_OTHER	(IEC958_AES1_CON_ADC_ID|0x60)
+#define IEC958_AES1_CON_ADC_COPYRIGHT_MASK 0x1f
+#define IEC958_AES1_CON_ADC_COPYRIGHT_ID 0x16
+#define IEC958_AES1_CON_ADC_COPYRIGHT	(IEC958_AES1_CON_ADC_COPYRIGHT_ID|0x00)
+#define IEC958_AES1_CON_ADC_COPYRIGHT_OTHER (IEC958_AES1_CON_ADC_COPYRIGHT_ID|0x60)
+#define IEC958_AES1_CON_SOLIDMEM_MASK	0x0f
+#define IEC958_AES1_CON_SOLIDMEM_ID	0x08
+#define IEC958_AES1_CON_SOLIDMEM_DIGITAL_RECORDER_PLAYER (IEC958_AES1_CON_SOLIDMEM_ID|0x00)
+#define IEC958_AES1_CON_SOLIDMEM_OTHER	(IEC958_AES1_CON_SOLIDMEM_ID|0x70)
+#define IEC958_AES1_CON_EXPERIMENTAL	0x40
+#define IEC958_AES1_CON_ORIGINAL	(1<<7)	/* this bits depends on the category code */
+#define IEC958_AES2_PRO_SBITS		(7<<0)	/* mask - sample bits */
+#define IEC958_AES2_PRO_SBITS_20	(2<<0)	/* 20-bit - coordination */
+#define IEC958_AES2_PRO_SBITS_24	(4<<0)	/* 24-bit - main audio */
+#define IEC958_AES2_PRO_SBITS_UDEF	(6<<0)	/* user defined application */
+#define IEC958_AES2_PRO_WORDLEN		(7<<3)	/* mask - source word length */
+#define IEC958_AES2_PRO_WORDLEN_NOTID	(0<<3)	/* not indicated */
+#define IEC958_AES2_PRO_WORDLEN_22_18	(2<<3)	/* 22-bit or 18-bit */
+#define IEC958_AES2_PRO_WORDLEN_23_19	(4<<3)	/* 23-bit or 19-bit */
+#define IEC958_AES2_PRO_WORDLEN_24_20	(5<<3)	/* 24-bit or 20-bit */
+#define IEC958_AES2_PRO_WORDLEN_20_16	(6<<3)	/* 20-bit or 16-bit */
+#define IEC958_AES2_CON_SOURCE		(15<<0)	/* mask - source number */
+#define IEC958_AES2_CON_SOURCE_UNSPEC	(0<<0)	/* unspecified */
+#define IEC958_AES2_CON_CHANNEL		(15<<4)	/* mask - channel number */
+#define IEC958_AES2_CON_CHANNEL_UNSPEC	(0<<4)	/* unspecified */
+#define IEC958_AES3_CON_FS		(15<<0)	/* mask - sample frequency */
+#define IEC958_AES3_CON_FS_44100	(0<<0)	/* 44.1kHz */
+#define IEC958_AES3_CON_FS_NOTID	(1<<0)	/* non indicated */
+#define IEC958_AES3_CON_FS_48000	(2<<0)	/* 48kHz */
+#define IEC958_AES3_CON_FS_32000	(3<<0)	/* 32kHz */
+#define IEC958_AES3_CON_FS_22050	(4<<0)	/* 22.05kHz */
+#define IEC958_AES3_CON_FS_24000	(6<<0)	/* 24kHz */
+#define IEC958_AES3_CON_FS_88200	(8<<0)	/* 88.2kHz */
+#define IEC958_AES3_CON_FS_768000	(9<<0)	/* 768kHz */
+#define IEC958_AES3_CON_FS_96000	(10<<0)	/* 96kHz */
+#define IEC958_AES3_CON_FS_176400	(12<<0)	/* 176.4kHz */
+#define IEC958_AES3_CON_FS_192000	(14<<0)	/* 192kHz */
+#define IEC958_AES3_CON_CLOCK		(3<<4)	/* mask - clock accuracy */
+#define IEC958_AES3_CON_CLOCK_1000PPM	(0<<4)	/* 1000 ppm */
+#define IEC958_AES3_CON_CLOCK_50PPM	(1<<4)	/* 50 ppm */
+#define IEC958_AES3_CON_CLOCK_VARIABLE	(2<<4)	/* variable pitch */
+#define IEC958_AES4_CON_MAX_WORDLEN_24	(1<<0)	/* 0 = 20-bit, 1 = 24-bit */
+#define IEC958_AES4_CON_WORDLEN		(7<<1)	/* mask - sample word length */
+#define IEC958_AES4_CON_WORDLEN_NOTID	(0<<1)	/* not indicated */
+#define IEC958_AES4_CON_WORDLEN_20_16	(1<<1)	/* 20-bit or 16-bit */
+#define IEC958_AES4_CON_WORDLEN_22_18	(2<<1)	/* 22-bit or 18-bit */
+#define IEC958_AES4_CON_WORDLEN_23_19	(4<<1)	/* 23-bit or 19-bit */
+#define IEC958_AES4_CON_WORDLEN_24_20	(5<<1)	/* 24-bit or 20-bit */
+#define IEC958_AES4_CON_WORDLEN_21_17	(6<<1)	/* 21-bit or 17-bit */
+#define IEC958_AES4_CON_ORIGFS		(15<<4)	/* mask - original sample frequency */
+#define IEC958_AES4_CON_ORIGFS_NOTID	(0<<4)	/* not indicated */
+#define IEC958_AES4_CON_ORIGFS_192000	(1<<4)	/* 192kHz */
+#define IEC958_AES4_CON_ORIGFS_12000	(2<<4)	/* 12kHz */
+#define IEC958_AES4_CON_ORIGFS_176400	(3<<4)	/* 176.4kHz */
+#define IEC958_AES4_CON_ORIGFS_96000	(5<<4)	/* 96kHz */
+#define IEC958_AES4_CON_ORIGFS_8000	(6<<4)	/* 8kHz */
+#define IEC958_AES4_CON_ORIGFS_88200	(7<<4)	/* 88.2kHz */
+#define IEC958_AES4_CON_ORIGFS_16000	(8<<4)	/* 16kHz */
+#define IEC958_AES4_CON_ORIGFS_24000	(9<<4)	/* 24kHz */
+#define IEC958_AES4_CON_ORIGFS_11025	(10<<4)	/* 11.025kHz */
+#define IEC958_AES4_CON_ORIGFS_22050	(11<<4)	/* 22.05kHz */
+#define IEC958_AES4_CON_ORIGFS_32000	(12<<4)	/* 32kHz */
+#define IEC958_AES4_CON_ORIGFS_48000	(13<<4)	/* 48kHz */
+#define IEC958_AES4_CON_ORIGFS_44100	(15<<4)	/* 44.1kHz */
+#define IEC958_AES5_CON_CGMSA		(3<<0)	/* mask - CGMS-A */
+#define IEC958_AES5_CON_CGMSA_COPYFREELY (0<<0)	/* copying is permitted without restriction */
+#define IEC958_AES5_CON_CGMSA_COPYONCE	(1<<0)	/* one generation of copies may be made */
+#define IEC958_AES5_CON_CGMSA_COPYNOMORE (2<<0)	/* condition not be used */
+#define IEC958_AES5_CON_CGMSA_COPYNEVER	(3<<0)	/* no copying is permitted */
+
+/*****************************************************************************
+ *                                                                           *
+ *                            MIDI v1.0 interface                            *
+ *                                                                           *
+ *****************************************************************************/
+
+#define MIDI_CHANNELS			16
+#define MIDI_GM_DRUM_CHANNEL		(10-1)
+
+/*
+ *  MIDI commands
+ */
+
+#define MIDI_CMD_NOTE_OFF		0x80
+#define MIDI_CMD_NOTE_ON		0x90
+#define MIDI_CMD_NOTE_PRESSURE		0xa0
+#define MIDI_CMD_CONTROL		0xb0
+#define MIDI_CMD_PGM_CHANGE		0xc0
+#define MIDI_CMD_CHANNEL_PRESSURE	0xd0
+#define MIDI_CMD_BENDER			0xe0
+
+#define MIDI_CMD_COMMON_SYSEX		0xf0
+#define MIDI_CMD_COMMON_MTC_QUARTER	0xf1
+#define MIDI_CMD_COMMON_SONG_POS	0xf2
+#define MIDI_CMD_COMMON_SONG_SELECT	0xf3
+#define MIDI_CMD_COMMON_TUNE_REQUEST	0xf6
+#define MIDI_CMD_COMMON_SYSEX_END	0xf7
+#define MIDI_CMD_COMMON_CLOCK		0xf8
+#define MIDI_CMD_COMMON_START		0xfa
+#define MIDI_CMD_COMMON_CONTINUE	0xfb
+#define MIDI_CMD_COMMON_STOP		0xfc
+#define MIDI_CMD_COMMON_SENSING		0xfe
+#define MIDI_CMD_COMMON_RESET		0xff
+
+/*
+ *  MIDI controllers
+ */
+
+#define MIDI_CTL_MSB_BANK		0x00
+#define MIDI_CTL_MSB_MODWHEEL         	0x01
+#define MIDI_CTL_MSB_BREATH           	0x02
+#define MIDI_CTL_MSB_FOOT             	0x04
+#define MIDI_CTL_MSB_PORTAMENTO_TIME 	0x05
+#define MIDI_CTL_MSB_DATA_ENTRY		0x06
+#define MIDI_CTL_MSB_MAIN_VOLUME      	0x07
+#define MIDI_CTL_MSB_BALANCE          	0x08
+#define MIDI_CTL_MSB_PAN              	0x0a
+#define MIDI_CTL_MSB_EXPRESSION       	0x0b
+#define MIDI_CTL_MSB_EFFECT1		0x0c
+#define MIDI_CTL_MSB_EFFECT2		0x0d
+#define MIDI_CTL_MSB_GENERAL_PURPOSE1 	0x10
+#define MIDI_CTL_MSB_GENERAL_PURPOSE2 	0x11
+#define MIDI_CTL_MSB_GENERAL_PURPOSE3 	0x12
+#define MIDI_CTL_MSB_GENERAL_PURPOSE4 	0x13
+#define MIDI_CTL_LSB_BANK		0x20
+#define MIDI_CTL_LSB_MODWHEEL        	0x21
+#define MIDI_CTL_LSB_BREATH           	0x22
+#define MIDI_CTL_LSB_FOOT             	0x24
+#define MIDI_CTL_LSB_PORTAMENTO_TIME 	0x25
+#define MIDI_CTL_LSB_DATA_ENTRY		0x26
+#define MIDI_CTL_LSB_MAIN_VOLUME      	0x27
+#define MIDI_CTL_LSB_BALANCE          	0x28
+#define MIDI_CTL_LSB_PAN              	0x2a
+#define MIDI_CTL_LSB_EXPRESSION       	0x2b
+#define MIDI_CTL_LSB_EFFECT1		0x2c
+#define MIDI_CTL_LSB_EFFECT2		0x2d
+#define MIDI_CTL_LSB_GENERAL_PURPOSE1 	0x30
+#define MIDI_CTL_LSB_GENERAL_PURPOSE2 	0x31
+#define MIDI_CTL_LSB_GENERAL_PURPOSE3 	0x32
+#define MIDI_CTL_LSB_GENERAL_PURPOSE4 	0x33
+#define MIDI_CTL_SUSTAIN              	0x40
+#define MIDI_CTL_PORTAMENTO           	0x41
+#define MIDI_CTL_SOSTENUTO            	0x42
+#define MIDI_CTL_SOFT_PEDAL           	0x43
+#define MIDI_CTL_LEGATO_FOOTSWITCH	0x44
+#define MIDI_CTL_HOLD2                	0x45
+#define MIDI_CTL_SC1_SOUND_VARIATION	0x46
+#define MIDI_CTL_SC2_TIMBRE		0x47
+#define MIDI_CTL_SC3_RELEASE_TIME	0x48
+#define MIDI_CTL_SC4_ATTACK_TIME	0x49
+#define MIDI_CTL_SC5_BRIGHTNESS		0x4a
+#define MIDI_CTL_SC6			0x4b
+#define MIDI_CTL_SC7			0x4c
+#define MIDI_CTL_SC8			0x4d
+#define MIDI_CTL_SC9			0x4e
+#define MIDI_CTL_SC10			0x4f
+#define MIDI_CTL_GENERAL_PURPOSE5     	0x50
+#define MIDI_CTL_GENERAL_PURPOSE6     	0x51
+#define MIDI_CTL_GENERAL_PURPOSE7     	0x52
+#define MIDI_CTL_GENERAL_PURPOSE8     	0x53
+#define MIDI_CTL_PORTAMENTO_CONTROL	0x54
+#define MIDI_CTL_E1_REVERB_DEPTH	0x5b
+#define MIDI_CTL_E2_TREMOLO_DEPTH	0x5c
+#define MIDI_CTL_E3_CHORUS_DEPTH	0x5d
+#define MIDI_CTL_E4_DETUNE_DEPTH	0x5e
+#define MIDI_CTL_E5_PHASER_DEPTH	0x5f
+#define MIDI_CTL_DATA_INCREMENT       	0x60
+#define MIDI_CTL_DATA_DECREMENT       	0x61
+#define MIDI_CTL_NONREG_PARM_NUM_LSB  	0x62
+#define MIDI_CTL_NONREG_PARM_NUM_MSB  	0x63
+#define MIDI_CTL_REGIST_PARM_NUM_LSB  	0x64
+#define MIDI_CTL_REGIST_PARM_NUM_MSB	0x65
+#define MIDI_CTL_ALL_SOUNDS_OFF		0x78
+#define MIDI_CTL_RESET_CONTROLLERS	0x79
+#define MIDI_CTL_LOCAL_CONTROL_SWITCH	0x7a
+#define MIDI_CTL_ALL_NOTES_OFF		0x7b
+#define MIDI_CTL_OMNI_OFF		0x7c
+#define MIDI_CTL_OMNI_ON		0x7d
+#define MIDI_CTL_MONO1			0x7e
+#define MIDI_CTL_MONO2			0x7f
+
+#endif /* __SOUND_ASOUNDEF_H */
diff --git a/include/sound/atmel-abdac.h b/include/sound/atmel-abdac.h
new file mode 100644
index 00000000..edff6a8b
--- /dev/null
+++ b/include/sound/atmel-abdac.h
@@ -0,0 +1,23 @@
+/*
+ * Driver for the Atmel Audio Bitstream DAC (ABDAC)
+ *
+ * Copyright (C) 2009 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+#ifndef __INCLUDE_SOUND_ATMEL_ABDAC_H
+#define __INCLUDE_SOUND_ATMEL_ABDAC_H
+
+#include <linux/dw_dmac.h>
+
+/**
+ * struct atmel_abdac_pdata - board specific ABDAC configuration
+ * @dws: DMA slave interface to use for sound playback.
+ */
+struct atmel_abdac_pdata {
+	struct dw_dma_slave	dws;
+};
+
+#endif /* __INCLUDE_SOUND_ATMEL_ABDAC_H */
diff --git a/include/sound/atmel-ac97c.h b/include/sound/atmel-ac97c.h
new file mode 100644
index 00000000..e6aabdb4
--- /dev/null
+++ b/include/sound/atmel-ac97c.h
@@ -0,0 +1,40 @@
+/*
+ * Driver for the Atmel AC97C controller
+ *
+ * Copyright (C) 2005-2009 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+#ifndef __INCLUDE_SOUND_ATMEL_AC97C_H
+#define __INCLUDE_SOUND_ATMEL_AC97C_H
+
+#include <linux/dw_dmac.h>
+
+#define AC97C_CAPTURE	0x01
+#define AC97C_PLAYBACK	0x02
+#define AC97C_BOTH	(AC97C_CAPTURE | AC97C_PLAYBACK)
+
+/**
+ * struct atmel_ac97c_pdata - board specific AC97C configuration
+ * @rx_dws: DMA slave interface to use for sound capture.
+ * @tx_dws: DMA slave interface to use for sound playback.
+ * @reset_pin: GPIO pin wired to the reset input on the external AC97 codec,
+ *             optional to use, set to -ENODEV if not in use. AC97 layer will
+ *             try to do a software reset of the external codec anyway.
+ * @flags: Flags for which directions should be enabled.
+ *
+ * If the user do not want to use a DMA channel for playback or capture, i.e.
+ * only one feature is required on the board. The slave for playback or capture
+ * can be set to NULL. The AC97C driver will take use of this when setting up
+ * the sound streams.
+ */
+struct ac97c_platform_data {
+	struct dw_dma_slave	rx_dws;
+	struct dw_dma_slave	tx_dws;
+	unsigned int 		flags;
+	int			reset_pin;
+};
+
+#endif /* __INCLUDE_SOUND_ATMEL_AC97C_H */
diff --git a/include/sound/compress_driver.h b/include/sound/compress_driver.h
new file mode 100644
index 00000000..48f2a1ff
--- /dev/null
+++ b/include/sound/compress_driver.h
@@ -0,0 +1,167 @@
+/*
+ *  compress_driver.h - compress offload driver definations
+ *
+ *  Copyright (C) 2011 Intel Corporation
+ *  Authors:	Vinod Koul <vinod.koul@linux.intel.com>
+ *		Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
+ *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ */
+#ifndef __COMPRESS_DRIVER_H
+#define __COMPRESS_DRIVER_H
+
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <sound/compress_offload.h>
+#include <sound/asound.h>
+#include <sound/pcm.h>
+
+struct snd_compr_ops;
+
+/**
+ * struct snd_compr_runtime: runtime stream description
+ * @state: stream state
+ * @ops: pointer to DSP callbacks
+ * @buffer: pointer to kernel buffer, valid only when not in mmap mode or
+ *	DSP doesn't implement copy
+ * @buffer_size: size of the above buffer
+ * @fragment_size: size of buffer fragment in bytes
+ * @fragments: number of such fragments
+ * @hw_pointer: offset of last location in buffer where DSP copied data
+ * @app_pointer: offset of last location in buffer where app wrote data
+ * @total_bytes_available: cumulative number of bytes made available in
+ *	the ring buffer
+ * @total_bytes_transferred: cumulative bytes transferred by offload DSP
+ * @sleep: poll sleep
+ */
+struct snd_compr_runtime {
+	snd_pcm_state_t state;
+	struct snd_compr_ops *ops;
+	void *buffer;
+	u64 buffer_size;
+	u32 fragment_size;
+	u32 fragments;
+	u64 hw_pointer;
+	u64 app_pointer;
+	u64 total_bytes_available;
+	u64 total_bytes_transferred;
+	wait_queue_head_t sleep;
+};
+
+/**
+ * struct snd_compr_stream: compressed stream
+ * @name: device name
+ * @ops: pointer to DSP callbacks
+ * @runtime: pointer to runtime structure
+ * @device: device pointer
+ * @direction: stream direction, playback/recording
+ * @private_data: pointer to DSP private data
+ */
+struct snd_compr_stream {
+	const char *name;
+	struct snd_compr_ops *ops;
+	struct snd_compr_runtime *runtime;
+	struct snd_compr *device;
+	enum snd_compr_direction direction;
+	void *private_data;
+};
+
+/**
+ * struct snd_compr_ops: compressed path DSP operations
+ * @open: Open the compressed stream
+ * This callback is mandatory and shall keep dsp ready to receive the stream
+ * parameter
+ * @free: Close the compressed stream, mandatory
+ * @set_params: Sets the compressed stream parameters, mandatory
+ * This can be called in during stream creation only to set codec params
+ * and the stream properties
+ * @get_params: retrieve the codec parameters, mandatory
+ * @trigger: Trigger operations like start, pause, resume, drain, stop.
+ * This callback is mandatory
+ * @pointer: Retrieve current h/w pointer information. Mandatory
+ * @copy: Copy the compressed data to/from userspace, Optional
+ * Can't be implemented if DSP supports mmap
+ * @mmap: DSP mmap method to mmap DSP memory
+ * @ack: Ack for DSP when data is written to audio buffer, Optional
+ * Not valid if copy is implemented
+ * @get_caps: Retrieve DSP capabilities, mandatory
+ * @get_codec_caps: Retrieve capabilities for a specific codec, mandatory
+ */
+struct snd_compr_ops {
+	int (*open)(struct snd_compr_stream *stream);
+	int (*free)(struct snd_compr_stream *stream);
+	int (*set_params)(struct snd_compr_stream *stream,
+			struct snd_compr_params *params);
+	int (*get_params)(struct snd_compr_stream *stream,
+			struct snd_codec *params);
+	int (*trigger)(struct snd_compr_stream *stream, int cmd);
+	int (*pointer)(struct snd_compr_stream *stream,
+			struct snd_compr_tstamp *tstamp);
+	int (*copy)(struct snd_compr_stream *stream, const char __user *buf,
+		       size_t count);
+	int (*mmap)(struct snd_compr_stream *stream,
+			struct vm_area_struct *vma);
+	int (*ack)(struct snd_compr_stream *stream, size_t bytes);
+	int (*get_caps) (struct snd_compr_stream *stream,
+			struct snd_compr_caps *caps);
+	int (*get_codec_caps) (struct snd_compr_stream *stream,
+			struct snd_compr_codec_caps *codec);
+};
+
+/**
+ * struct snd_compr: Compressed device
+ * @name: DSP device name
+ * @dev: Device pointer
+ * @ops: pointer to DSP callbacks
+ * @private_data: pointer to DSP pvt data
+ * @card: sound card pointer
+ * @direction: Playback or capture direction
+ * @lock: device lock
+ * @device: device id
+ */
+struct snd_compr {
+	const char *name;
+	struct device *dev;
+	struct snd_compr_ops *ops;
+	void *private_data;
+	struct snd_card *card;
+	unsigned int direction;
+	struct mutex lock;
+	int device;
+};
+
+/* compress device register APIs */
+int snd_compress_register(struct snd_compr *device);
+int snd_compress_deregister(struct snd_compr *device);
+int snd_compress_new(struct snd_card *card, int device,
+			int type, struct snd_compr *compr);
+
+/* dsp driver callback apis
+ * For playback: driver should call snd_compress_fragment_elapsed() to let the
+ * framework know that a fragment has been consumed from the ring buffer
+ *
+ * For recording: we want to know when a frame is available or when
+ * at least one frame is available so snd_compress_frame_elapsed()
+ * callback should be called when a encodeded frame is available
+ */
+static inline void snd_compr_fragment_elapsed(struct snd_compr_stream *stream)
+{
+	wake_up(&stream->runtime->sleep);
+}
+
+#endif
diff --git a/include/sound/compress_offload.h b/include/sound/compress_offload.h
new file mode 100644
index 00000000..05341a43
--- /dev/null
+++ b/include/sound/compress_offload.h
@@ -0,0 +1,161 @@
+/*
+ *  compress_offload.h - compress offload header definations
+ *
+ *  Copyright (C) 2011 Intel Corporation
+ *  Authors:	Vinod Koul <vinod.koul@linux.intel.com>
+ *		Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
+ *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ */
+#ifndef __COMPRESS_OFFLOAD_H
+#define __COMPRESS_OFFLOAD_H
+
+#include <linux/types.h>
+#include <sound/asound.h>
+#include <sound/compress_params.h>
+
+
+#define SNDRV_COMPRESS_VERSION SNDRV_PROTOCOL_VERSION(0, 1, 0)
+/**
+ * struct snd_compressed_buffer: compressed buffer
+ * @fragment_size: size of buffer fragment in bytes
+ * @fragments: number of such fragments
+ */
+struct snd_compressed_buffer {
+	__u32 fragment_size;
+	__u32 fragments;
+};
+
+/**
+ * struct snd_compr_params: compressed stream params
+ * @buffer: buffer description
+ * @codec: codec parameters
+ * @no_wake_mode: dont wake on fragment elapsed
+ */
+struct snd_compr_params {
+	struct snd_compressed_buffer buffer;
+	struct snd_codec codec;
+	__u8 no_wake_mode;
+};
+
+/**
+ * struct snd_compr_tstamp: timestamp descriptor
+ * @byte_offset: Byte offset in ring buffer to DSP
+ * @copied_total: Total number of bytes copied from/to ring buffer to/by DSP
+ * @pcm_frames: Frames decoded or encoded by DSP. This field will evolve by
+ *	large steps and should only be used to monitor encoding/decoding
+ *	progress. It shall not be used for timing estimates.
+ * @pcm_io_frames: Frames rendered or received by DSP into a mixer or an audio
+ * output/input. This field should be used for A/V sync or time estimates.
+ * @sampling_rate: sampling rate of audio
+ */
+struct snd_compr_tstamp {
+	__u32 byte_offset;
+	__u32 copied_total;
+	snd_pcm_uframes_t pcm_frames;
+	snd_pcm_uframes_t pcm_io_frames;
+	__u32 sampling_rate;
+};
+
+/**
+ * struct snd_compr_avail: avail descriptor
+ * @avail: Number of bytes available in ring buffer for writing/reading
+ * @tstamp: timestamp infomation
+ */
+struct snd_compr_avail {
+	__u64 avail;
+	struct snd_compr_tstamp tstamp;
+};
+
+enum snd_compr_direction {
+	SND_COMPRESS_PLAYBACK = 0,
+	SND_COMPRESS_CAPTURE
+};
+
+/**
+ * struct snd_compr_caps: caps descriptor
+ * @codecs: pointer to array of codecs
+ * @direction: direction supported. Of type snd_compr_direction
+ * @min_fragment_size: minimum fragment supported by DSP
+ * @max_fragment_size: maximum fragment supported by DSP
+ * @min_fragments: min fragments supported by DSP
+ * @max_fragments: max fragments supported by DSP
+ * @num_codecs: number of codecs supported
+ * @reserved: reserved field
+ */
+struct snd_compr_caps {
+	__u32 num_codecs;
+	__u32 direction;
+	__u32 min_fragment_size;
+	__u32 max_fragment_size;
+	__u32 min_fragments;
+	__u32 max_fragments;
+	__u32 codecs[MAX_NUM_CODECS];
+	__u32 reserved[11];
+};
+
+/**
+ * struct snd_compr_codec_caps: query capability of codec
+ * @codec: codec for which capability is queried
+ * @num_descriptors: number of codec descriptors
+ * @descriptor: array of codec capability descriptor
+ */
+struct snd_compr_codec_caps {
+	__u32 codec;
+	__u32 num_descriptors;
+	struct snd_codec_desc descriptor[MAX_NUM_CODEC_DESCRIPTORS];
+};
+
+/**
+ * compress path ioctl definitions
+ * SNDRV_COMPRESS_GET_CAPS: Query capability of DSP
+ * SNDRV_COMPRESS_GET_CODEC_CAPS: Query capability of a codec
+ * SNDRV_COMPRESS_SET_PARAMS: Set codec and stream parameters
+ * Note: only codec params can be changed runtime and stream params cant be
+ * SNDRV_COMPRESS_GET_PARAMS: Query codec params
+ * SNDRV_COMPRESS_TSTAMP: get the current timestamp value
+ * SNDRV_COMPRESS_AVAIL: get the current buffer avail value.
+ * This also queries the tstamp properties
+ * SNDRV_COMPRESS_PAUSE: Pause the running stream
+ * SNDRV_COMPRESS_RESUME: resume a paused stream
+ * SNDRV_COMPRESS_START: Start a stream
+ * SNDRV_COMPRESS_STOP: stop a running stream, discarding ring buffer content
+ * and the buffers currently with DSP
+ * SNDRV_COMPRESS_DRAIN: Play till end of buffers and stop after that
+ * SNDRV_COMPRESS_IOCTL_VERSION: Query the API version
+ */
+#define SNDRV_COMPRESS_IOCTL_VERSION	_IOR('C', 0x00, int)
+#define SNDRV_COMPRESS_GET_CAPS		_IOWR('C', 0x10, struct snd_compr_caps)
+#define SNDRV_COMPRESS_GET_CODEC_CAPS	_IOWR('C', 0x11,\
+						struct snd_compr_codec_caps)
+#define SNDRV_COMPRESS_SET_PARAMS	_IOW('C', 0x12, struct snd_compr_params)
+#define SNDRV_COMPRESS_GET_PARAMS	_IOR('C', 0x13, struct snd_codec)
+#define SNDRV_COMPRESS_TSTAMP		_IOR('C', 0x20, struct snd_compr_tstamp)
+#define SNDRV_COMPRESS_AVAIL		_IOR('C', 0x21, struct snd_compr_avail)
+#define SNDRV_COMPRESS_PAUSE		_IO('C', 0x30)
+#define SNDRV_COMPRESS_RESUME		_IO('C', 0x31)
+#define SNDRV_COMPRESS_START		_IO('C', 0x32)
+#define SNDRV_COMPRESS_STOP		_IO('C', 0x33)
+#define SNDRV_COMPRESS_DRAIN		_IO('C', 0x34)
+/*
+ * TODO
+ * 1. add mmap support
+ *
+ */
+#define SND_COMPR_TRIGGER_DRAIN 7 /*FIXME move this to pcm.h */
+#endif
diff --git a/include/sound/compress_params.h b/include/sound/compress_params.h
new file mode 100644
index 00000000..da4a456d
--- /dev/null
+++ b/include/sound/compress_params.h
@@ -0,0 +1,399 @@
+/*
+ *  compress_params.h - codec types and parameters for compressed data
+ *  streaming interface
+ *
+ *  Copyright (C) 2011 Intel Corporation
+ *  Authors:	Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
+ *              Vinod Koul <vinod.koul@linux.intel.com>
+ *
+ *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * The definitions in this file are derived from the OpenMAX AL version 1.1
+ * and OpenMAX IL v 1.1.2 header files which contain the copyright notice below.
+ *
+ * Copyright (c) 2007-2010 The Khronos Group Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and/or associated documentation files (the
+ * "Materials "), to deal in the Materials without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Materials, and to
+ * permit persons to whom the Materials are furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Materials.
+ *
+ * THE MATERIALS ARE PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ * MATERIALS OR THE USE OR OTHER DEALINGS IN THE MATERIALS.
+ *
+ */
+#ifndef __SND_COMPRESS_PARAMS_H
+#define __SND_COMPRESS_PARAMS_H
+
+#include <linux/types.h>
+
+/* AUDIO CODECS SUPPORTED */
+#define MAX_NUM_CODECS 32
+#define MAX_NUM_CODEC_DESCRIPTORS 32
+#define MAX_NUM_BITRATES 32
+
+/* Codecs are listed linearly to allow for extensibility */
+#define SND_AUDIOCODEC_PCM                   ((__u32) 0x00000001)
+#define SND_AUDIOCODEC_MP3                   ((__u32) 0x00000002)
+#define SND_AUDIOCODEC_AMR                   ((__u32) 0x00000003)
+#define SND_AUDIOCODEC_AMRWB                 ((__u32) 0x00000004)
+#define SND_AUDIOCODEC_AMRWBPLUS             ((__u32) 0x00000005)
+#define SND_AUDIOCODEC_AAC                   ((__u32) 0x00000006)
+#define SND_AUDIOCODEC_WMA                   ((__u32) 0x00000007)
+#define SND_AUDIOCODEC_REAL                  ((__u32) 0x00000008)
+#define SND_AUDIOCODEC_VORBIS                ((__u32) 0x00000009)
+#define SND_AUDIOCODEC_FLAC                  ((__u32) 0x0000000A)
+#define SND_AUDIOCODEC_IEC61937              ((__u32) 0x0000000B)
+#define SND_AUDIOCODEC_G723_1                ((__u32) 0x0000000C)
+#define SND_AUDIOCODEC_G729                  ((__u32) 0x0000000D)
+
+/*
+ * Profile and modes are listed with bit masks. This allows for a
+ * more compact representation of fields that will not evolve
+ * (in contrast to the list of codecs)
+ */
+
+#define SND_AUDIOPROFILE_PCM                 ((__u32) 0x00000001)
+
+/* MP3 modes are only useful for encoders */
+#define SND_AUDIOCHANMODE_MP3_MONO           ((__u32) 0x00000001)
+#define SND_AUDIOCHANMODE_MP3_STEREO         ((__u32) 0x00000002)
+#define SND_AUDIOCHANMODE_MP3_JOINTSTEREO    ((__u32) 0x00000004)
+#define SND_AUDIOCHANMODE_MP3_DUAL           ((__u32) 0x00000008)
+
+#define SND_AUDIOPROFILE_AMR                 ((__u32) 0x00000001)
+
+/* AMR modes are only useful for encoders */
+#define SND_AUDIOMODE_AMR_DTX_OFF            ((__u32) 0x00000001)
+#define SND_AUDIOMODE_AMR_VAD1               ((__u32) 0x00000002)
+#define SND_AUDIOMODE_AMR_VAD2               ((__u32) 0x00000004)
+
+#define SND_AUDIOSTREAMFORMAT_UNDEFINED	     ((__u32) 0x00000000)
+#define SND_AUDIOSTREAMFORMAT_CONFORMANCE    ((__u32) 0x00000001)
+#define SND_AUDIOSTREAMFORMAT_IF1            ((__u32) 0x00000002)
+#define SND_AUDIOSTREAMFORMAT_IF2            ((__u32) 0x00000004)
+#define SND_AUDIOSTREAMFORMAT_FSF            ((__u32) 0x00000008)
+#define SND_AUDIOSTREAMFORMAT_RTPPAYLOAD     ((__u32) 0x00000010)
+#define SND_AUDIOSTREAMFORMAT_ITU            ((__u32) 0x00000020)
+
+#define SND_AUDIOPROFILE_AMRWB               ((__u32) 0x00000001)
+
+/* AMRWB modes are only useful for encoders */
+#define SND_AUDIOMODE_AMRWB_DTX_OFF          ((__u32) 0x00000001)
+#define SND_AUDIOMODE_AMRWB_VAD1             ((__u32) 0x00000002)
+#define SND_AUDIOMODE_AMRWB_VAD2             ((__u32) 0x00000004)
+
+#define SND_AUDIOPROFILE_AMRWBPLUS           ((__u32) 0x00000001)
+
+#define SND_AUDIOPROFILE_AAC                 ((__u32) 0x00000001)
+
+/* AAC modes are required for encoders and decoders */
+#define SND_AUDIOMODE_AAC_MAIN               ((__u32) 0x00000001)
+#define SND_AUDIOMODE_AAC_LC                 ((__u32) 0x00000002)
+#define SND_AUDIOMODE_AAC_SSR                ((__u32) 0x00000004)
+#define SND_AUDIOMODE_AAC_LTP                ((__u32) 0x00000008)
+#define SND_AUDIOMODE_AAC_HE                 ((__u32) 0x00000010)
+#define SND_AUDIOMODE_AAC_SCALABLE           ((__u32) 0x00000020)
+#define SND_AUDIOMODE_AAC_ERLC               ((__u32) 0x00000040)
+#define SND_AUDIOMODE_AAC_LD                 ((__u32) 0x00000080)
+#define SND_AUDIOMODE_AAC_HE_PS              ((__u32) 0x00000100)
+#define SND_AUDIOMODE_AAC_HE_MPS             ((__u32) 0x00000200)
+
+/* AAC formats are required for encoders and decoders */
+#define SND_AUDIOSTREAMFORMAT_MP2ADTS        ((__u32) 0x00000001)
+#define SND_AUDIOSTREAMFORMAT_MP4ADTS        ((__u32) 0x00000002)
+#define SND_AUDIOSTREAMFORMAT_MP4LOAS        ((__u32) 0x00000004)
+#define SND_AUDIOSTREAMFORMAT_MP4LATM        ((__u32) 0x00000008)
+#define SND_AUDIOSTREAMFORMAT_ADIF           ((__u32) 0x00000010)
+#define SND_AUDIOSTREAMFORMAT_MP4FF          ((__u32) 0x00000020)
+#define SND_AUDIOSTREAMFORMAT_RAW            ((__u32) 0x00000040)
+
+#define SND_AUDIOPROFILE_WMA7                ((__u32) 0x00000001)
+#define SND_AUDIOPROFILE_WMA8                ((__u32) 0x00000002)
+#define SND_AUDIOPROFILE_WMA9                ((__u32) 0x00000004)
+#define SND_AUDIOPROFILE_WMA10               ((__u32) 0x00000008)
+
+#define SND_AUDIOMODE_WMA_LEVEL1             ((__u32) 0x00000001)
+#define SND_AUDIOMODE_WMA_LEVEL2             ((__u32) 0x00000002)
+#define SND_AUDIOMODE_WMA_LEVEL3             ((__u32) 0x00000004)
+#define SND_AUDIOMODE_WMA_LEVEL4             ((__u32) 0x00000008)
+#define SND_AUDIOMODE_WMAPRO_LEVELM0         ((__u32) 0x00000010)
+#define SND_AUDIOMODE_WMAPRO_LEVELM1         ((__u32) 0x00000020)
+#define SND_AUDIOMODE_WMAPRO_LEVELM2         ((__u32) 0x00000040)
+#define SND_AUDIOMODE_WMAPRO_LEVELM3         ((__u32) 0x00000080)
+
+#define SND_AUDIOSTREAMFORMAT_WMA_ASF        ((__u32) 0x00000001)
+/*
+ * Some implementations strip the ASF header and only send ASF packets
+ * to the DSP
+ */
+#define SND_AUDIOSTREAMFORMAT_WMA_NOASF_HDR  ((__u32) 0x00000002)
+
+#define SND_AUDIOPROFILE_REALAUDIO           ((__u32) 0x00000001)
+
+#define SND_AUDIOMODE_REALAUDIO_G2           ((__u32) 0x00000001)
+#define SND_AUDIOMODE_REALAUDIO_8            ((__u32) 0x00000002)
+#define SND_AUDIOMODE_REALAUDIO_10           ((__u32) 0x00000004)
+#define SND_AUDIOMODE_REALAUDIO_SURROUND     ((__u32) 0x00000008)
+
+#define SND_AUDIOPROFILE_VORBIS              ((__u32) 0x00000001)
+
+#define SND_AUDIOMODE_VORBIS                 ((__u32) 0x00000001)
+
+#define SND_AUDIOPROFILE_FLAC                ((__u32) 0x00000001)
+
+/*
+ * Define quality levels for FLAC encoders, from LEVEL0 (fast)
+ * to LEVEL8 (best)
+ */
+#define SND_AUDIOMODE_FLAC_LEVEL0            ((__u32) 0x00000001)
+#define SND_AUDIOMODE_FLAC_LEVEL1            ((__u32) 0x00000002)
+#define SND_AUDIOMODE_FLAC_LEVEL2            ((__u32) 0x00000004)
+#define SND_AUDIOMODE_FLAC_LEVEL3            ((__u32) 0x00000008)
+#define SND_AUDIOMODE_FLAC_LEVEL4            ((__u32) 0x00000010)
+#define SND_AUDIOMODE_FLAC_LEVEL5            ((__u32) 0x00000020)
+#define SND_AUDIOMODE_FLAC_LEVEL6            ((__u32) 0x00000040)
+#define SND_AUDIOMODE_FLAC_LEVEL7            ((__u32) 0x00000080)
+#define SND_AUDIOMODE_FLAC_LEVEL8            ((__u32) 0x00000100)
+
+#define SND_AUDIOSTREAMFORMAT_FLAC           ((__u32) 0x00000001)
+#define SND_AUDIOSTREAMFORMAT_FLAC_OGG       ((__u32) 0x00000002)
+
+/* IEC61937 payloads without CUVP and preambles */
+#define SND_AUDIOPROFILE_IEC61937            ((__u32) 0x00000001)
+/* IEC61937 with S/PDIF preambles+CUVP bits in 32-bit containers */
+#define SND_AUDIOPROFILE_IEC61937_SPDIF      ((__u32) 0x00000002)
+
+/*
+ * IEC modes are mandatory for decoders. Format autodetection
+ * will only happen on the DSP side with mode 0. The PCM mode should
+ * not be used, the PCM codec should be used instead.
+ */
+#define SND_AUDIOMODE_IEC_REF_STREAM_HEADER  ((__u32) 0x00000000)
+#define SND_AUDIOMODE_IEC_LPCM		     ((__u32) 0x00000001)
+#define SND_AUDIOMODE_IEC_AC3		     ((__u32) 0x00000002)
+#define SND_AUDIOMODE_IEC_MPEG1		     ((__u32) 0x00000004)
+#define SND_AUDIOMODE_IEC_MP3		     ((__u32) 0x00000008)
+#define SND_AUDIOMODE_IEC_MPEG2		     ((__u32) 0x00000010)
+#define SND_AUDIOMODE_IEC_AACLC		     ((__u32) 0x00000020)
+#define SND_AUDIOMODE_IEC_DTS		     ((__u32) 0x00000040)
+#define SND_AUDIOMODE_IEC_ATRAC		     ((__u32) 0x00000080)
+#define SND_AUDIOMODE_IEC_SACD		     ((__u32) 0x00000100)
+#define SND_AUDIOMODE_IEC_EAC3		     ((__u32) 0x00000200)
+#define SND_AUDIOMODE_IEC_DTS_HD	     ((__u32) 0x00000400)
+#define SND_AUDIOMODE_IEC_MLP		     ((__u32) 0x00000800)
+#define SND_AUDIOMODE_IEC_DST		     ((__u32) 0x00001000)
+#define SND_AUDIOMODE_IEC_WMAPRO	     ((__u32) 0x00002000)
+#define SND_AUDIOMODE_IEC_REF_CXT            ((__u32) 0x00004000)
+#define SND_AUDIOMODE_IEC_HE_AAC	     ((__u32) 0x00008000)
+#define SND_AUDIOMODE_IEC_HE_AAC2	     ((__u32) 0x00010000)
+#define SND_AUDIOMODE_IEC_MPEG_SURROUND	     ((__u32) 0x00020000)
+
+#define SND_AUDIOPROFILE_G723_1              ((__u32) 0x00000001)
+
+#define SND_AUDIOMODE_G723_1_ANNEX_A         ((__u32) 0x00000001)
+#define SND_AUDIOMODE_G723_1_ANNEX_B         ((__u32) 0x00000002)
+#define SND_AUDIOMODE_G723_1_ANNEX_C         ((__u32) 0x00000004)
+
+#define SND_AUDIOPROFILE_G729                ((__u32) 0x00000001)
+
+#define SND_AUDIOMODE_G729_ANNEX_A           ((__u32) 0x00000001)
+#define SND_AUDIOMODE_G729_ANNEX_B           ((__u32) 0x00000002)
+
+/* <FIXME: multichannel encoders aren't supported for now. Would need
+   an additional definition of channel arrangement> */
+
+/* VBR/CBR definitions */
+#define SND_RATECONTROLMODE_CONSTANTBITRATE  ((__u32) 0x00000001)
+#define SND_RATECONTROLMODE_VARIABLEBITRATE  ((__u32) 0x00000002)
+
+/* Encoder options */
+
+struct snd_enc_wma {
+	__u32 super_block_align; /* WMA Type-specific data */
+};
+
+
+/**
+ * struct snd_enc_vorbis
+ * @quality: Sets encoding quality to n, between -1 (low) and 10 (high).
+ * In the default mode of operation, the quality level is 3.
+ * Normal quality range is 0 - 10.
+ * @managed: Boolean. Set  bitrate  management  mode. This turns off the
+ * normal VBR encoding, but allows hard or soft bitrate constraints to be
+ * enforced by the encoder. This mode can be slower, and may also be
+ * lower quality. It is primarily useful for streaming.
+ * @max_bit_rate: Enabled only if managed is TRUE
+ * @min_bit_rate: Enabled only if managed is TRUE
+ * @downmix: Boolean. Downmix input from stereo to mono (has no effect on
+ * non-stereo streams). Useful for lower-bitrate encoding.
+ *
+ * These options were extracted from the OpenMAX IL spec and Gstreamer vorbisenc
+ * properties
+ *
+ * For best quality users should specify VBR mode and set quality levels.
+ */
+
+struct snd_enc_vorbis {
+	__s32 quality;
+	__u32 managed;
+	__u32 max_bit_rate;
+	__u32 min_bit_rate;
+	__u32 downmix;
+};
+
+
+/**
+ * struct snd_enc_real
+ * @quant_bits: number of coupling quantization bits in the stream
+ * @start_region: coupling start region in the stream
+ * @num_regions: number of regions value
+ *
+ * These options were extracted from the OpenMAX IL spec
+ */
+
+struct snd_enc_real {
+	__u32 quant_bits;
+	__u32 start_region;
+	__u32 num_regions;
+};
+
+/**
+ * struct snd_enc_flac
+ * @num: serial number, valid only for OGG formats
+ *	needs to be set by application
+ * @gain: Add replay gain tags
+ *
+ * These options were extracted from the FLAC online documentation
+ * at http://flac.sourceforge.net/documentation_tools_flac.html
+ *
+ * To make the API simpler, it is assumed that the user will select quality
+ * profiles. Additional options that affect encoding quality and speed can
+ * be added at a later stage if needed.
+ *
+ * By default the Subset format is used by encoders.
+ *
+ * TAGS such as pictures, etc, cannot be handled by an offloaded encoder and are
+ * not supported in this API.
+ */
+
+struct snd_enc_flac {
+	__u32 num;
+	__u32 gain;
+};
+
+struct snd_enc_generic {
+	__u32 bw;	/* encoder bandwidth */
+	__s32 reserved[15];
+};
+
+union snd_codec_options {
+	struct snd_enc_wma wma;
+	struct snd_enc_vorbis vorbis;
+	struct snd_enc_real real;
+	struct snd_enc_flac flac;
+	struct snd_enc_generic generic;
+};
+
+/** struct snd_codec_desc - description of codec capabilities
+ * @max_ch: Maximum number of audio channels
+ * @sample_rates: Sampling rates in Hz, use SNDRV_PCM_RATE_xxx for this
+ * @bit_rate: Indexed array containing supported bit rates
+ * @num_bitrates: Number of valid values in bit_rate array
+ * @rate_control: value is specified by SND_RATECONTROLMODE defines.
+ * @profiles: Supported profiles. See SND_AUDIOPROFILE defines.
+ * @modes: Supported modes. See SND_AUDIOMODE defines
+ * @formats: Supported formats. See SND_AUDIOSTREAMFORMAT defines
+ * @min_buffer: Minimum buffer size handled by codec implementation
+ * @reserved: reserved for future use
+ *
+ * This structure provides a scalar value for profiles, modes and stream
+ * format fields.
+ * If an implementation supports multiple combinations, they will be listed as
+ * codecs with different descriptors, for example there would be 2 descriptors
+ * for AAC-RAW and AAC-ADTS.
+ * This entails some redundancy but makes it easier to avoid invalid
+ * configurations.
+ *
+ */
+
+struct snd_codec_desc {
+	__u32 max_ch;
+	__u32 sample_rates;
+	__u32 bit_rate[MAX_NUM_BITRATES];
+	__u32 num_bitrates;
+	__u32 rate_control;
+	__u32 profiles;
+	__u32 modes;
+	__u32 formats;
+	__u32 min_buffer;
+	__u32 reserved[15];
+};
+
+/** struct snd_codec
+ * @id: Identifies the supported audio encoder/decoder.
+ *		See SND_AUDIOCODEC macros.
+ * @ch_in: Number of input audio channels
+ * @ch_out: Number of output channels. In case of contradiction between
+ *		this field and the channelMode field, the channelMode field
+ *		overrides.
+ * @sample_rate: Audio sample rate of input data
+ * @bit_rate: Bitrate of encoded data. May be ignored by decoders
+ * @rate_control: Encoding rate control. See SND_RATECONTROLMODE defines.
+ *               Encoders may rely on profiles for quality levels.
+ *		 May be ignored by decoders.
+ * @profile: Mandatory for encoders, can be mandatory for specific
+ *		decoders as well. See SND_AUDIOPROFILE defines.
+ * @level: Supported level (Only used by WMA at the moment)
+ * @ch_mode: Channel mode for encoder. See SND_AUDIOCHANMODE defines
+ * @format: Format of encoded bistream. Mandatory when defined.
+ *		See SND_AUDIOSTREAMFORMAT defines.
+ * @align: Block alignment in bytes of an audio sample.
+ *		Only required for PCM or IEC formats.
+ * @options: encoder-specific settings
+ * @reserved: reserved for future use
+ */
+
+struct snd_codec {
+	__u32 id;
+	__u32 ch_in;
+	__u32 ch_out;
+	__u32 sample_rate;
+	__u32 bit_rate;
+	__u32 rate_control;
+	__u32 profile;
+	__u32 level;
+	__u32 ch_mode;
+	__u32 format;
+	__u32 align;
+	union snd_codec_options options;
+	__u32 reserved[3];
+};
+
+#endif
diff --git a/include/sound/control.h b/include/sound/control.h
new file mode 100644
index 00000000..8332e865
--- /dev/null
+++ b/include/sound/control.h
@@ -0,0 +1,243 @@
+#ifndef __SOUND_CONTROL_H
+#define __SOUND_CONTROL_H
+
+/*
+ *  Header file for control interface
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <sound/asound.h>
+
+#define snd_kcontrol_chip(kcontrol) ((kcontrol)->private_data)
+
+struct snd_kcontrol;
+typedef int (snd_kcontrol_info_t) (struct snd_kcontrol * kcontrol, struct snd_ctl_elem_info * uinfo);
+typedef int (snd_kcontrol_get_t) (struct snd_kcontrol * kcontrol, struct snd_ctl_elem_value * ucontrol);
+typedef int (snd_kcontrol_put_t) (struct snd_kcontrol * kcontrol, struct snd_ctl_elem_value * ucontrol);
+typedef int (snd_kcontrol_tlv_rw_t)(struct snd_kcontrol *kcontrol,
+				    int op_flag, /* 0=read,1=write,-1=command */
+				    unsigned int size,
+				    unsigned int __user *tlv);
+
+
+struct snd_kcontrol_new {
+	snd_ctl_elem_iface_t iface;	/* interface identifier */
+	unsigned int device;		/* device/client number */
+	unsigned int subdevice;		/* subdevice (substream) number */
+	const unsigned char *name;	/* ASCII name of item */
+	unsigned int index;		/* index of item */
+	unsigned int access;		/* access rights */
+	unsigned int count;		/* count of same elements */
+	snd_kcontrol_info_t *info;
+	snd_kcontrol_get_t *get;
+	snd_kcontrol_put_t *put;
+	union {
+		snd_kcontrol_tlv_rw_t *c;
+		const unsigned int *p;
+	} tlv;
+	unsigned long private_value;
+};
+
+struct snd_kcontrol_volatile {
+	struct snd_ctl_file *owner;	/* locked */
+	unsigned int access;	/* access rights */
+};
+
+struct snd_kcontrol {
+	struct list_head list;		/* list of controls */
+	struct snd_ctl_elem_id id;
+	unsigned int count;		/* count of same elements */
+	snd_kcontrol_info_t *info;
+	snd_kcontrol_get_t *get;
+	snd_kcontrol_put_t *put;
+	union {
+		snd_kcontrol_tlv_rw_t *c;
+		const unsigned int *p;
+	} tlv;
+	unsigned long private_value;
+	void *private_data;
+	void (*private_free)(struct snd_kcontrol *kcontrol);
+	struct snd_kcontrol_volatile vd[0];	/* volatile data */
+};
+
+#define snd_kcontrol(n) list_entry(n, struct snd_kcontrol, list)
+
+struct snd_kctl_event {
+	struct list_head list;	/* list of events */
+	struct snd_ctl_elem_id id;
+	unsigned int mask;
+};
+
+#define snd_kctl_event(n) list_entry(n, struct snd_kctl_event, list)
+
+struct pid;
+
+struct snd_ctl_file {
+	struct list_head list;		/* list of all control files */
+	struct snd_card *card;
+	struct pid *pid;
+	int prefer_pcm_subdevice;
+	int prefer_rawmidi_subdevice;
+	wait_queue_head_t change_sleep;
+	spinlock_t read_lock;
+	struct fasync_struct *fasync;
+	int subscribed;			/* read interface is activated */
+	struct list_head events;	/* waiting events for read */
+};
+
+#define snd_ctl_file(n) list_entry(n, struct snd_ctl_file, list)
+
+typedef int (*snd_kctl_ioctl_func_t) (struct snd_card * card,
+				      struct snd_ctl_file * control,
+				      unsigned int cmd, unsigned long arg);
+
+void snd_ctl_notify(struct snd_card * card, unsigned int mask, struct snd_ctl_elem_id * id);
+
+struct snd_kcontrol *snd_ctl_new1(const struct snd_kcontrol_new * kcontrolnew, void * private_data);
+void snd_ctl_free_one(struct snd_kcontrol * kcontrol);
+int snd_ctl_add(struct snd_card * card, struct snd_kcontrol * kcontrol);
+int snd_ctl_remove(struct snd_card * card, struct snd_kcontrol * kcontrol);
+int snd_ctl_replace(struct snd_card *card, struct snd_kcontrol *kcontrol, bool add_on_replace);
+int snd_ctl_remove_id(struct snd_card * card, struct snd_ctl_elem_id *id);
+int snd_ctl_rename_id(struct snd_card * card, struct snd_ctl_elem_id *src_id, struct snd_ctl_elem_id *dst_id);
+int snd_ctl_activate_id(struct snd_card *card, struct snd_ctl_elem_id *id,
+			int active);
+struct snd_kcontrol *snd_ctl_find_numid(struct snd_card * card, unsigned int numid);
+struct snd_kcontrol *snd_ctl_find_id(struct snd_card * card, struct snd_ctl_elem_id *id);
+
+int snd_ctl_create(struct snd_card *card);
+
+int snd_ctl_register_ioctl(snd_kctl_ioctl_func_t fcn);
+int snd_ctl_unregister_ioctl(snd_kctl_ioctl_func_t fcn);
+#ifdef CONFIG_COMPAT
+int snd_ctl_register_ioctl_compat(snd_kctl_ioctl_func_t fcn);
+int snd_ctl_unregister_ioctl_compat(snd_kctl_ioctl_func_t fcn);
+#else
+#define snd_ctl_register_ioctl_compat(fcn)
+#define snd_ctl_unregister_ioctl_compat(fcn)
+#endif
+
+static inline unsigned int snd_ctl_get_ioffnum(struct snd_kcontrol *kctl, struct snd_ctl_elem_id *id)
+{
+	return id->numid - kctl->id.numid;
+}
+
+static inline unsigned int snd_ctl_get_ioffidx(struct snd_kcontrol *kctl, struct snd_ctl_elem_id *id)
+{
+	return id->index - kctl->id.index;
+}
+
+static inline unsigned int snd_ctl_get_ioff(struct snd_kcontrol *kctl, struct snd_ctl_elem_id *id)
+{
+	if (id->numid) {
+		return snd_ctl_get_ioffnum(kctl, id);
+	} else {
+		return snd_ctl_get_ioffidx(kctl, id);
+	}
+}
+
+static inline struct snd_ctl_elem_id *snd_ctl_build_ioff(struct snd_ctl_elem_id *dst_id,
+						    struct snd_kcontrol *src_kctl,
+						    unsigned int offset)
+{
+	*dst_id = src_kctl->id;
+	dst_id->index += offset;
+	dst_id->numid += offset;
+	return dst_id;
+}
+
+/*
+ * Frequently used control callbacks/helpers
+ */
+int snd_ctl_boolean_mono_info(struct snd_kcontrol *kcontrol,
+			      struct snd_ctl_elem_info *uinfo);
+int snd_ctl_boolean_stereo_info(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_info *uinfo);
+int snd_ctl_enum_info(struct snd_ctl_elem_info *info, unsigned int channels,
+		      unsigned int items, const char *const names[]);
+
+/*
+ * virtual master control
+ */
+struct snd_kcontrol *snd_ctl_make_virtual_master(char *name,
+						 const unsigned int *tlv);
+int _snd_ctl_add_slave(struct snd_kcontrol *master, struct snd_kcontrol *slave,
+		       unsigned int flags);
+/* optional flags for slave */
+#define SND_CTL_SLAVE_NEED_UPDATE	(1 << 0)
+
+/**
+ * snd_ctl_add_slave - Add a virtual slave control
+ * @master: vmaster element
+ * @slave: slave element to add
+ *
+ * Add a virtual slave control to the given master element created via
+ * snd_ctl_create_virtual_master() beforehand.
+ * Returns zero if successful or a negative error code.
+ *
+ * All slaves must be the same type (returning the same information
+ * via info callback).  The function doesn't check it, so it's your
+ * responsibility.
+ *
+ * Also, some additional limitations:
+ * at most two channels,
+ * logarithmic volume control (dB level) thus no linear volume,
+ * master can only attenuate the volume without gain
+ */
+static inline int
+snd_ctl_add_slave(struct snd_kcontrol *master, struct snd_kcontrol *slave)
+{
+	return _snd_ctl_add_slave(master, slave, 0);
+}
+
+/**
+ * snd_ctl_add_slave_uncached - Add a virtual slave control
+ * @master: vmaster element
+ * @slave: slave element to add
+ *
+ * Add a virtual slave control to the given master.
+ * Unlike snd_ctl_add_slave(), the element added via this function
+ * is supposed to have volatile values, and get callback is called
+ * at each time quried from the master.
+ *
+ * When the control peeks the hardware values directly and the value
+ * can be changed by other means than the put callback of the element,
+ * this function should be used to keep the value always up-to-date.
+ */
+static inline int
+snd_ctl_add_slave_uncached(struct snd_kcontrol *master,
+			   struct snd_kcontrol *slave)
+{
+	return _snd_ctl_add_slave(master, slave, SND_CTL_SLAVE_NEED_UPDATE);
+}
+
+int snd_ctl_add_vmaster_hook(struct snd_kcontrol *kctl,
+			     void (*hook)(void *private_data, int),
+			     void *private_data);
+void snd_ctl_sync_vmaster_hook(struct snd_kcontrol *kctl);
+
+/*
+ * Helper functions for jack-detection controls
+ */
+struct snd_kcontrol *
+snd_kctl_jack_new(const char *name, int idx, void *private_data);
+void snd_kctl_jack_report(struct snd_card *card,
+			  struct snd_kcontrol *kctl, bool status);
+
+#endif	/* __SOUND_CONTROL_H */
diff --git a/include/sound/core.h b/include/sound/core.h
new file mode 100644
index 00000000..93896ad1
--- /dev/null
+++ b/include/sound/core.h
@@ -0,0 +1,474 @@
+#ifndef __SOUND_CORE_H
+#define __SOUND_CORE_H
+
+/*
+ *  Main header file for the ALSA driver
+ *  Copyright (c) 1994-2001 by Jaroslav Kysela <perex@perex.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <linux/sched.h>		/* wake_up() */
+#include <linux/mutex.h>		/* struct mutex */
+#include <linux/rwsem.h>		/* struct rw_semaphore */
+#include <linux/pm.h>			/* pm_message_t */
+#include <linux/stringify.h>
+
+/* number of supported soundcards */
+#ifdef CONFIG_SND_DYNAMIC_MINORS
+#define SNDRV_CARDS 32
+#else
+#define SNDRV_CARDS 8		/* don't change - minor numbers */
+#endif
+
+#define CONFIG_SND_MAJOR	116	/* standard configuration */
+
+/* forward declarations */
+struct pci_dev;
+struct module;
+struct device;
+struct device_attribute;
+
+/* device allocation stuff */
+
+#define SNDRV_DEV_TYPE_RANGE_SIZE		0x1000
+
+typedef int __bitwise snd_device_type_t;
+#define	SNDRV_DEV_TOPLEVEL	((__force snd_device_type_t) 0)
+#define	SNDRV_DEV_CONTROL	((__force snd_device_type_t) 1)
+#define	SNDRV_DEV_LOWLEVEL_PRE	((__force snd_device_type_t) 2)
+#define	SNDRV_DEV_LOWLEVEL_NORMAL ((__force snd_device_type_t) 0x1000)
+#define	SNDRV_DEV_PCM		((__force snd_device_type_t) 0x1001)
+#define	SNDRV_DEV_RAWMIDI	((__force snd_device_type_t) 0x1002)
+#define	SNDRV_DEV_TIMER		((__force snd_device_type_t) 0x1003)
+#define	SNDRV_DEV_SEQUENCER	((__force snd_device_type_t) 0x1004)
+#define	SNDRV_DEV_HWDEP		((__force snd_device_type_t) 0x1005)
+#define	SNDRV_DEV_INFO		((__force snd_device_type_t) 0x1006)
+#define	SNDRV_DEV_BUS		((__force snd_device_type_t) 0x1007)
+#define	SNDRV_DEV_CODEC		((__force snd_device_type_t) 0x1008)
+#define	SNDRV_DEV_JACK          ((__force snd_device_type_t) 0x1009)
+#define	SNDRV_DEV_COMPRESS	((__force snd_device_type_t) 0x100A)
+#define	SNDRV_DEV_LOWLEVEL	((__force snd_device_type_t) 0x2000)
+
+typedef int __bitwise snd_device_state_t;
+#define	SNDRV_DEV_BUILD		((__force snd_device_state_t) 0)
+#define	SNDRV_DEV_REGISTERED	((__force snd_device_state_t) 1)
+#define	SNDRV_DEV_DISCONNECTED	((__force snd_device_state_t) 2)
+
+typedef int __bitwise snd_device_cmd_t;
+#define	SNDRV_DEV_CMD_PRE	((__force snd_device_cmd_t) 0)
+#define	SNDRV_DEV_CMD_NORMAL	((__force snd_device_cmd_t) 1)	
+#define	SNDRV_DEV_CMD_POST	((__force snd_device_cmd_t) 2)
+
+struct snd_device;
+
+struct snd_device_ops {
+	int (*dev_free)(struct snd_device *dev);
+	int (*dev_register)(struct snd_device *dev);
+	int (*dev_disconnect)(struct snd_device *dev);
+};
+
+struct snd_device {
+	struct list_head list;		/* list of registered devices */
+	struct snd_card *card;		/* card which holds this device */
+	snd_device_state_t state;	/* state of the device */
+	snd_device_type_t type;		/* device type */
+	void *device_data;		/* device structure */
+	struct snd_device_ops *ops;	/* operations */
+};
+
+#define snd_device(n) list_entry(n, struct snd_device, list)
+
+/* main structure for soundcard */
+
+struct snd_card {
+	int number;			/* number of soundcard (index to
+								snd_cards) */
+
+	char id[16];			/* id string of this card */
+	char driver[16];		/* driver name */
+	char shortname[32];		/* short name of this soundcard */
+	char longname[80];		/* name of this soundcard */
+	char mixername[80];		/* mixer name */
+	char components[128];		/* card components delimited with
+								space */
+	struct module *module;		/* top-level module */
+
+	void *private_data;		/* private data for soundcard */
+	void (*private_free) (struct snd_card *card); /* callback for freeing of
+								private data */
+	struct list_head devices;	/* devices */
+
+	unsigned int last_numid;	/* last used numeric ID */
+	struct rw_semaphore controls_rwsem;	/* controls list lock */
+	rwlock_t ctl_files_rwlock;	/* ctl_files list lock */
+	int controls_count;		/* count of all controls */
+	int user_ctl_count;		/* count of all user controls */
+	struct list_head controls;	/* all controls for this card */
+	struct list_head ctl_files;	/* active control files */
+
+	struct snd_info_entry *proc_root;	/* root for soundcard specific files */
+	struct snd_info_entry *proc_id;	/* the card id */
+	struct proc_dir_entry *proc_root_link;	/* number link to real id */
+
+	struct list_head files_list;	/* all files associated to this card */
+	struct snd_shutdown_f_ops *s_f_ops; /* file operations in the shutdown
+								state */
+	spinlock_t files_lock;		/* lock the files for this card */
+	int shutdown;			/* this card is going down */
+	int free_on_last_close;		/* free in context of file_release */
+	wait_queue_head_t shutdown_sleep;
+	atomic_t refcount;		/* refcount for disconnection */
+	struct device *dev;		/* device assigned to this card */
+	struct device *card_dev;	/* cardX object for sysfs */
+
+#ifdef CONFIG_PM
+	unsigned int power_state;	/* power state */
+	struct mutex power_lock;	/* power lock */
+	wait_queue_head_t power_sleep;
+#endif
+
+#if defined(CONFIG_SND_MIXER_OSS) || defined(CONFIG_SND_MIXER_OSS_MODULE)
+	struct snd_mixer_oss *mixer_oss;
+	int mixer_oss_change_count;
+#endif
+};
+
+#ifdef CONFIG_PM
+static inline void snd_power_lock(struct snd_card *card)
+{
+	mutex_lock(&card->power_lock);
+}
+
+static inline void snd_power_unlock(struct snd_card *card)
+{
+	mutex_unlock(&card->power_lock);
+}
+
+static inline unsigned int snd_power_get_state(struct snd_card *card)
+{
+	return card->power_state;
+}
+
+static inline void snd_power_change_state(struct snd_card *card, unsigned int state)
+{
+	card->power_state = state;
+	wake_up(&card->power_sleep);
+}
+
+/* init.c */
+int snd_power_wait(struct snd_card *card, unsigned int power_state);
+
+#else /* ! CONFIG_PM */
+
+#define snd_power_lock(card)		do { (void)(card); } while (0)
+#define snd_power_unlock(card)		do { (void)(card); } while (0)
+static inline int snd_power_wait(struct snd_card *card, unsigned int state) { return 0; }
+#define snd_power_get_state(card)	({ (void)(card); SNDRV_CTL_POWER_D0; })
+#define snd_power_change_state(card, state)	do { (void)(card); } while (0)
+
+#endif /* CONFIG_PM */
+
+struct snd_minor {
+	int type;			/* SNDRV_DEVICE_TYPE_XXX */
+	int card;			/* card number */
+	int device;			/* device number */
+	const struct file_operations *f_ops;	/* file operations */
+	void *private_data;		/* private data for f_ops->open */
+	struct device *dev;		/* device for sysfs */
+	struct snd_card *card_ptr;	/* assigned card instance */
+};
+
+/* return a device pointer linked to each sound device as a parent */
+static inline struct device *snd_card_get_device_link(struct snd_card *card)
+{
+	return card ? card->card_dev : NULL;
+}
+
+/* sound.c */
+
+extern int snd_major;
+extern int snd_ecards_limit;
+extern struct class *sound_class;
+
+void snd_request_card(int card);
+
+int snd_register_device_for_dev(int type, struct snd_card *card,
+				int dev,
+				const struct file_operations *f_ops,
+				void *private_data,
+				const char *name,
+				struct device *device);
+
+/**
+ * snd_register_device - Register the ALSA device file for the card
+ * @type: the device type, SNDRV_DEVICE_TYPE_XXX
+ * @card: the card instance
+ * @dev: the device index
+ * @f_ops: the file operations
+ * @private_data: user pointer for f_ops->open()
+ * @name: the device file name
+ *
+ * Registers an ALSA device file for the given card.
+ * The operators have to be set in reg parameter.
+ *
+ * This function uses the card's device pointer to link to the
+ * correct &struct device.
+ *
+ * Returns zero if successful, or a negative error code on failure.
+ */
+static inline int snd_register_device(int type, struct snd_card *card, int dev,
+				      const struct file_operations *f_ops,
+				      void *private_data,
+				      const char *name)
+{
+	return snd_register_device_for_dev(type, card, dev, f_ops,
+					   private_data, name,
+					   snd_card_get_device_link(card));
+}
+
+int snd_unregister_device(int type, struct snd_card *card, int dev);
+void *snd_lookup_minor_data(unsigned int minor, int type);
+int snd_add_device_sysfs_file(int type, struct snd_card *card, int dev,
+			      struct device_attribute *attr);
+
+#ifdef CONFIG_SND_OSSEMUL
+int snd_register_oss_device(int type, struct snd_card *card, int dev,
+			    const struct file_operations *f_ops, void *private_data,
+			    const char *name);
+int snd_unregister_oss_device(int type, struct snd_card *card, int dev);
+void *snd_lookup_oss_minor_data(unsigned int minor, int type);
+#endif
+
+int snd_minor_info_init(void);
+int snd_minor_info_done(void);
+
+/* sound_oss.c */
+
+#ifdef CONFIG_SND_OSSEMUL
+int snd_minor_info_oss_init(void);
+int snd_minor_info_oss_done(void);
+#else
+static inline int snd_minor_info_oss_init(void) { return 0; }
+static inline int snd_minor_info_oss_done(void) { return 0; }
+#endif
+
+/* memory.c */
+
+int copy_to_user_fromio(void __user *dst, const volatile void __iomem *src, size_t count);
+int copy_from_user_toio(volatile void __iomem *dst, const void __user *src, size_t count);
+
+/* init.c */
+
+extern struct snd_card *snd_cards[SNDRV_CARDS];
+int snd_card_locked(int card);
+#if defined(CONFIG_SND_MIXER_OSS) || defined(CONFIG_SND_MIXER_OSS_MODULE)
+#define SND_MIXER_OSS_NOTIFY_REGISTER	0
+#define SND_MIXER_OSS_NOTIFY_DISCONNECT	1
+#define SND_MIXER_OSS_NOTIFY_FREE	2
+extern int (*snd_mixer_oss_notify_callback)(struct snd_card *card, int cmd);
+#endif
+
+int snd_card_create(int idx, const char *id,
+		    struct module *module, int extra_size,
+		    struct snd_card **card_ret);
+
+int snd_card_disconnect(struct snd_card *card);
+int snd_card_free(struct snd_card *card);
+int snd_card_free_when_closed(struct snd_card *card);
+void snd_card_set_id(struct snd_card *card, const char *id);
+int snd_card_register(struct snd_card *card);
+int snd_card_info_init(void);
+int snd_card_info_done(void);
+int snd_component_add(struct snd_card *card, const char *component);
+int snd_card_file_add(struct snd_card *card, struct file *file);
+int snd_card_file_remove(struct snd_card *card, struct file *file);
+void snd_card_unref(struct snd_card *card);
+
+#define snd_card_set_dev(card, devptr) ((card)->dev = (devptr))
+
+/* device.c */
+
+int snd_device_new(struct snd_card *card, snd_device_type_t type,
+		   void *device_data, struct snd_device_ops *ops);
+int snd_device_register(struct snd_card *card, void *device_data);
+int snd_device_register_all(struct snd_card *card);
+int snd_device_disconnect(struct snd_card *card, void *device_data);
+int snd_device_disconnect_all(struct snd_card *card);
+int snd_device_free(struct snd_card *card, void *device_data);
+int snd_device_free_all(struct snd_card *card, snd_device_cmd_t cmd);
+
+/* isadma.c */
+
+#ifdef CONFIG_ISA_DMA_API
+#define DMA_MODE_NO_ENABLE	0x0100
+
+void snd_dma_program(unsigned long dma, unsigned long addr, unsigned int size, unsigned short mode);
+void snd_dma_disable(unsigned long dma);
+unsigned int snd_dma_pointer(unsigned long dma, unsigned int size);
+#endif
+
+/* misc.c */
+struct resource;
+void release_and_free_resource(struct resource *res);
+
+/* --- */
+
+/* sound printk debug levels */
+enum {
+	SND_PR_ALWAYS,
+	SND_PR_DEBUG,
+	SND_PR_VERBOSE,
+};
+
+#if defined(CONFIG_SND_DEBUG) || defined(CONFIG_SND_VERBOSE_PRINTK)
+__printf(4, 5)
+void __snd_printk(unsigned int level, const char *file, int line,
+		  const char *format, ...);
+#else
+#define __snd_printk(level, file, line, format, args...) \
+	printk(format, ##args)
+#endif
+
+/**
+ * snd_printk - printk wrapper
+ * @fmt: format string
+ *
+ * Works like printk() but prints the file and the line of the caller
+ * when configured with CONFIG_SND_VERBOSE_PRINTK.
+ */
+#define snd_printk(fmt, args...) \
+	__snd_printk(0, __FILE__, __LINE__, fmt, ##args)
+
+#ifdef CONFIG_SND_DEBUG
+/**
+ * snd_printd - debug printk
+ * @fmt: format string
+ *
+ * Works like snd_printk() for debugging purposes.
+ * Ignored when CONFIG_SND_DEBUG is not set.
+ */
+#define snd_printd(fmt, args...) \
+	__snd_printk(1, __FILE__, __LINE__, fmt, ##args)
+#define _snd_printd(level, fmt, args...) \
+	__snd_printk(level, __FILE__, __LINE__, fmt, ##args)
+
+/**
+ * snd_BUG - give a BUG warning message and stack trace
+ *
+ * Calls WARN() if CONFIG_SND_DEBUG is set.
+ * Ignored when CONFIG_SND_DEBUG is not set.
+ */
+#define snd_BUG()		WARN(1, "BUG?\n")
+
+/**
+ * snd_BUG_ON - debugging check macro
+ * @cond: condition to evaluate
+ *
+ * When CONFIG_SND_DEBUG is set, this macro evaluates the given condition,
+ * and call WARN() and returns the value if it's non-zero.
+ * 
+ * When CONFIG_SND_DEBUG is not set, this just returns zero, and the given
+ * condition is ignored.
+ *
+ * NOTE: the argument won't be evaluated at all when CONFIG_SND_DEBUG=n.
+ * Thus, don't put any statement that influences on the code behavior,
+ * such as pre/post increment, to the argument of this macro.
+ * If you want to evaluate and give a warning, use standard WARN_ON().
+ */
+#define snd_BUG_ON(cond)	WARN((cond), "BUG? (%s)\n", __stringify(cond))
+
+#else /* !CONFIG_SND_DEBUG */
+
+#define snd_printd(fmt, args...)	do { } while (0)
+#define _snd_printd(level, fmt, args...) do { } while (0)
+#define snd_BUG()			do { } while (0)
+static inline int __snd_bug_on(int cond)
+{
+	return 0;
+}
+#define snd_BUG_ON(cond)	__snd_bug_on(0 && (cond))  /* always false */
+
+#endif /* CONFIG_SND_DEBUG */
+
+#ifdef CONFIG_SND_DEBUG_VERBOSE
+/**
+ * snd_printdd - debug printk
+ * @format: format string
+ *
+ * Works like snd_printk() for debugging purposes.
+ * Ignored when CONFIG_SND_DEBUG_VERBOSE is not set.
+ */
+#define snd_printdd(format, args...) \
+	__snd_printk(2, __FILE__, __LINE__, format, ##args)
+#else
+#define snd_printdd(format, args...)	do { } while (0)
+#endif
+
+
+#define SNDRV_OSS_VERSION         ((3<<16)|(8<<8)|(1<<4)|(0))	/* 3.8.1a */
+
+/* for easier backward-porting */
+#if defined(CONFIG_GAMEPORT) || defined(CONFIG_GAMEPORT_MODULE)
+#define gameport_set_dev_parent(gp,xdev) ((gp)->dev.parent = (xdev))
+#define gameport_set_port_data(gp,r) ((gp)->port_data = (r))
+#define gameport_get_port_data(gp) (gp)->port_data
+#endif
+
+#ifdef CONFIG_PCI
+/* PCI quirk list helper */
+struct snd_pci_quirk {
+	unsigned short subvendor;	/* PCI subvendor ID */
+	unsigned short subdevice;	/* PCI subdevice ID */
+	unsigned short subdevice_mask;	/* bitmask to match */
+	int value;			/* value */
+#ifdef CONFIG_SND_DEBUG_VERBOSE
+	const char *name;		/* name of the device (optional) */
+#endif
+};
+
+#define _SND_PCI_QUIRK_ID_MASK(vend, mask, dev)	\
+	.subvendor = (vend), .subdevice = (dev), .subdevice_mask = (mask)
+#define _SND_PCI_QUIRK_ID(vend, dev) \
+	_SND_PCI_QUIRK_ID_MASK(vend, 0xffff, dev)
+#define SND_PCI_QUIRK_ID(vend,dev) {_SND_PCI_QUIRK_ID(vend, dev)}
+#ifdef CONFIG_SND_DEBUG_VERBOSE
+#define SND_PCI_QUIRK(vend,dev,xname,val) \
+	{_SND_PCI_QUIRK_ID(vend, dev), .value = (val), .name = (xname)}
+#define SND_PCI_QUIRK_VENDOR(vend, xname, val)			\
+	{_SND_PCI_QUIRK_ID_MASK(vend, 0, 0), .value = (val), .name = (xname)}
+#define SND_PCI_QUIRK_MASK(vend, mask, dev, xname, val)			\
+	{_SND_PCI_QUIRK_ID_MASK(vend, mask, dev),			\
+			.value = (val), .name = (xname)}
+#else
+#define SND_PCI_QUIRK(vend,dev,xname,val) \
+	{_SND_PCI_QUIRK_ID(vend, dev), .value = (val)}
+#define SND_PCI_QUIRK_MASK(vend, mask, dev, xname, val)			\
+	{_SND_PCI_QUIRK_ID_MASK(vend, mask, dev), .value = (val)}
+#define SND_PCI_QUIRK_VENDOR(vend, xname, val)			\
+	{_SND_PCI_QUIRK_ID_MASK(vend, 0, 0), .value = (val)}
+#endif
+
+const struct snd_pci_quirk *
+snd_pci_quirk_lookup(struct pci_dev *pci, const struct snd_pci_quirk *list);
+
+const struct snd_pci_quirk *
+snd_pci_quirk_lookup_id(u16 vendor, u16 device,
+			const struct snd_pci_quirk *list);
+#endif
+
+#endif /* __SOUND_CORE_H */
diff --git a/include/sound/cs4231-regs.h b/include/sound/cs4231-regs.h
new file mode 100644
index 00000000..66d28c2c
--- /dev/null
+++ b/include/sound/cs4231-regs.h
@@ -0,0 +1,187 @@
+#ifndef __SOUND_CS4231_REGS_H
+#define __SOUND_CS4231_REGS_H
+
+/*
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ *  Definitions for CS4231 & InterWave chips & compatible chips registers
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+/* IO ports */
+
+#define CS4231P(x)		(c_d_c_CS4231##x)
+
+#define c_d_c_CS4231REGSEL	0
+#define c_d_c_CS4231REG		1
+#define c_d_c_CS4231STATUS	2
+#define c_d_c_CS4231PIO		3
+
+/* codec registers */
+
+#define CS4231_LEFT_INPUT	0x00	/* left input control */
+#define CS4231_RIGHT_INPUT	0x01	/* right input control */
+#define CS4231_AUX1_LEFT_INPUT	0x02	/* left AUX1 input control */
+#define CS4231_AUX1_RIGHT_INPUT	0x03	/* right AUX1 input control */
+#define CS4231_AUX2_LEFT_INPUT	0x04	/* left AUX2 input control */
+#define CS4231_AUX2_RIGHT_INPUT	0x05	/* right AUX2 input control */
+#define CS4231_LEFT_OUTPUT	0x06	/* left output control register */
+#define CS4231_RIGHT_OUTPUT	0x07	/* right output control register */
+#define CS4231_PLAYBK_FORMAT	0x08	/* clock and data format - playback - bits 7-0 MCE */
+#define CS4231_IFACE_CTRL	0x09	/* interface control - bits 7-2 MCE */
+#define CS4231_PIN_CTRL		0x0a	/* pin control */
+#define CS4231_TEST_INIT	0x0b	/* test and initialization */
+#define CS4231_MISC_INFO	0x0c	/* miscellaneous information */
+#define CS4231_LOOPBACK		0x0d	/* loopback control */
+#define CS4231_PLY_UPR_CNT	0x0e	/* playback upper base count */
+#define CS4231_PLY_LWR_CNT	0x0f	/* playback lower base count */
+#define CS4231_ALT_FEATURE_1	0x10	/* alternate #1 feature enable */
+#define AD1845_AF1_MIC_LEFT	0x10	/* alternate #1 feature + MIC left */
+#define CS4231_ALT_FEATURE_2	0x11	/* alternate #2 feature enable */
+#define AD1845_AF2_MIC_RIGHT	0x11	/* alternate #2 feature + MIC right */
+#define CS4231_LEFT_LINE_IN	0x12	/* left line input control */
+#define CS4231_RIGHT_LINE_IN	0x13	/* right line input control */
+#define CS4231_TIMER_LOW	0x14	/* timer low byte */
+#define CS4231_TIMER_HIGH	0x15	/* timer high byte */
+#define CS4231_LEFT_MIC_INPUT	0x16	/* left MIC input control register (InterWave only) */
+#define AD1845_UPR_FREQ_SEL	0x16	/* upper byte of frequency select */
+#define CS4231_RIGHT_MIC_INPUT	0x17	/* right MIC input control register (InterWave only) */
+#define AD1845_LWR_FREQ_SEL	0x17	/* lower byte of frequency select */
+#define CS4236_EXT_REG		0x17	/* extended register access */
+#define CS4231_IRQ_STATUS	0x18	/* irq status register */
+#define CS4231_LINE_LEFT_OUTPUT	0x19	/* left line output control register (InterWave only) */
+#define CS4231_VERSION		0x19	/* CS4231(A) - version values */
+#define CS4231_MONO_CTRL	0x1a	/* mono input/output control */
+#define CS4231_LINE_RIGHT_OUTPUT 0x1b	/* right line output control register (InterWave only) */
+#define AD1845_PWR_DOWN		0x1b	/* power down control */
+#define CS4235_LEFT_MASTER	0x1b	/* left master output control */
+#define CS4231_REC_FORMAT	0x1c	/* clock and data format - record - bits 7-0 MCE */
+#define AD1845_CLOCK		0x1d	/* crystal clock select and total power down */
+#define CS4235_RIGHT_MASTER	0x1d	/* right master output control */
+#define CS4231_REC_UPR_CNT	0x1e	/* record upper count */
+#define CS4231_REC_LWR_CNT	0x1f	/* record lower count */
+
+/* definitions for codec register select port - CODECP( REGSEL ) */
+
+#define CS4231_INIT		0x80	/* CODEC is initializing */
+#define CS4231_MCE		0x40	/* mode change enable */
+#define CS4231_TRD		0x20	/* transfer request disable */
+
+/* definitions for codec status register - CODECP( STATUS ) */
+
+#define CS4231_GLOBALIRQ	0x01	/* IRQ is active */
+
+/* definitions for codec irq status */
+
+#define CS4231_PLAYBACK_IRQ	0x10
+#define CS4231_RECORD_IRQ	0x20
+#define CS4231_TIMER_IRQ	0x40
+#define CS4231_ALL_IRQS		0x70
+#define CS4231_REC_UNDERRUN	0x08
+#define CS4231_REC_OVERRUN	0x04
+#define CS4231_PLY_OVERRUN	0x02
+#define CS4231_PLY_UNDERRUN	0x01
+
+/* definitions for CS4231_LEFT_INPUT and CS4231_RIGHT_INPUT registers */
+
+#define CS4231_ENABLE_MIC_GAIN	0x20
+
+#define CS4231_MIXS_LINE	0x00
+#define CS4231_MIXS_AUX1	0x40
+#define CS4231_MIXS_MIC		0x80
+#define CS4231_MIXS_ALL		0xc0
+
+/* definitions for clock and data format register - CS4231_PLAYBK_FORMAT */
+
+#define CS4231_LINEAR_8		0x00	/* 8-bit unsigned data */
+#define CS4231_ALAW_8		0x60	/* 8-bit A-law companded */
+#define CS4231_ULAW_8		0x20	/* 8-bit U-law companded */
+#define CS4231_LINEAR_16	0x40	/* 16-bit twos complement data - little endian */
+#define CS4231_LINEAR_16_BIG	0xc0	/* 16-bit twos complement data - big endian */
+#define CS4231_ADPCM_16		0xa0	/* 16-bit ADPCM */
+#define CS4231_STEREO		0x10	/* stereo mode */
+/* bits 3-1 define frequency divisor */
+#define CS4231_XTAL1		0x00	/* 24.576 crystal */
+#define CS4231_XTAL2		0x01	/* 16.9344 crystal */
+
+/* definitions for interface control register - CS4231_IFACE_CTRL */
+
+#define CS4231_RECORD_PIO	0x80	/* record PIO enable */
+#define CS4231_PLAYBACK_PIO	0x40	/* playback PIO enable */
+#define CS4231_CALIB_MODE	0x18	/* calibration mode bits */
+#define CS4231_AUTOCALIB	0x08	/* auto calibrate */
+#define CS4231_SINGLE_DMA	0x04	/* use single DMA channel */
+#define CS4231_RECORD_ENABLE	0x02	/* record enable */
+#define CS4231_PLAYBACK_ENABLE	0x01	/* playback enable */
+
+/* definitions for pin control register - CS4231_PIN_CTRL */
+
+#define CS4231_IRQ_ENABLE	0x02	/* enable IRQ */
+#define CS4231_XCTL1		0x40	/* external control #1 */
+#define CS4231_XCTL0		0x80	/* external control #0 */
+
+/* definitions for test and init register - CS4231_TEST_INIT */
+
+#define CS4231_CALIB_IN_PROGRESS 0x20	/* auto calibrate in progress */
+#define CS4231_DMA_REQUEST	0x10	/* DMA request in progress */
+
+/* definitions for misc control register - CS4231_MISC_INFO */
+
+#define CS4231_MODE2		0x40	/* MODE 2 */
+#define CS4231_IW_MODE3		0x6c	/* MODE 3 - InterWave enhanced mode */
+#define CS4231_4236_MODE3	0xe0	/* MODE 3 - CS4236+ enhanced mode */
+
+/* definitions for alternate feature 1 register - CS4231_ALT_FEATURE_1 */
+
+#define	CS4231_DACZ		0x01	/* zero DAC when underrun */
+#define CS4231_TIMER_ENABLE	0x40	/* codec timer enable */
+#define CS4231_OLB		0x80	/* output level bit */
+
+/* definitions for Extended Registers - CS4236+ */
+
+#define CS4236_REG(i23val)	(((i23val << 2) & 0x10) | ((i23val >> 4) & 0x0f))
+#define CS4236_I23VAL(reg)	((((reg)&0xf) << 4) | (((reg)&0x10) >> 2) | 0x8)
+
+#define CS4236_LEFT_LINE	0x08	/* left LINE alternate volume */
+#define CS4236_RIGHT_LINE	0x18	/* right LINE alternate volume */
+#define CS4236_LEFT_MIC		0x28	/* left MIC volume */
+#define CS4236_RIGHT_MIC	0x38	/* right MIC volume */
+#define CS4236_LEFT_MIX_CTRL	0x48	/* synthesis and left input mixer control */
+#define CS4236_RIGHT_MIX_CTRL	0x58	/* right input mixer control */
+#define CS4236_LEFT_FM		0x68	/* left FM volume */
+#define CS4236_RIGHT_FM		0x78	/* right FM volume */
+#define CS4236_LEFT_DSP		0x88	/* left DSP serial port volume */
+#define CS4236_RIGHT_DSP	0x98	/* right DSP serial port volume */
+#define CS4236_RIGHT_LOOPBACK	0xa8	/* right loopback monitor volume */
+#define CS4236_DAC_MUTE		0xb8	/* DAC mute and IFSE enable */
+#define CS4236_ADC_RATE		0xc8	/* indenpendent ADC sample frequency */
+#define CS4236_DAC_RATE		0xd8	/* indenpendent DAC sample frequency */
+#define CS4236_LEFT_MASTER	0xe8	/* left master digital audio volume */
+#define CS4236_RIGHT_MASTER	0xf8	/* right master digital audio volume */
+#define CS4236_LEFT_WAVE	0x0c	/* left wavetable serial port volume */
+#define CS4236_RIGHT_WAVE	0x1c	/* right wavetable serial port volume */
+#define CS4236_VERSION		0x9c	/* chip version and ID */
+
+/* definitions for extended registers - OPTI93X */
+#define OPTi931_AUX_LEFT_INPUT	0x10
+#define OPTi931_AUX_RIGHT_INPUT	0x11
+#define OPTi93X_MIC_LEFT_INPUT	0x14
+#define OPTi93X_MIC_RIGHT_INPUT	0x15
+#define OPTi93X_OUT_LEFT	0x16
+#define OPTi93X_OUT_RIGHT	0x17
+
+#endif /* __SOUND_CS4231_REGS_H */
diff --git a/include/sound/cs4271.h b/include/sound/cs4271.h
new file mode 100644
index 00000000..50a059e7
--- /dev/null
+++ b/include/sound/cs4271.h
@@ -0,0 +1,24 @@
+/*
+ * Definitions for CS4271 ASoC codec driver
+ *
+ * Copyright (c) 2010 Alexander Sverdlin <subaparts@yandex.ru>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __CS4271_H
+#define __CS4271_H
+
+struct cs4271_platform_data {
+	int gpio_nreset;	/* GPIO driving Reset pin, if any */
+};
+
+#endif /* __CS4271_H */
diff --git a/include/sound/cs46xx.h b/include/sound/cs46xx.h
new file mode 100644
index 00000000..e3005a67
--- /dev/null
+++ b/include/sound/cs46xx.h
@@ -0,0 +1,1745 @@
+#ifndef __SOUND_CS46XX_H
+#define __SOUND_CS46XX_H
+
+/*
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>,
+ *		     Cirrus Logic, Inc.
+ *  Definitions for Cirrus Logic CS46xx chips
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include "pcm.h"
+#include "pcm-indirect.h"
+#include "rawmidi.h"
+#include "ac97_codec.h"
+#include "cs46xx_dsp_spos.h"
+
+/*
+ *  Direct registers
+ */
+
+/*
+ *  The following define the offsets of the registers accessed via base address
+ *  register zero on the CS46xx part.
+ */
+#define BA0_HISR				0x00000000
+#define BA0_HSR0                                0x00000004
+#define BA0_HICR                                0x00000008
+#define BA0_DMSR                                0x00000100
+#define BA0_HSAR                                0x00000110
+#define BA0_HDAR                                0x00000114
+#define BA0_HDMR                                0x00000118
+#define BA0_HDCR                                0x0000011C
+#define BA0_PFMC                                0x00000200
+#define BA0_PFCV1                               0x00000204
+#define BA0_PFCV2                               0x00000208
+#define BA0_PCICFG00                            0x00000300
+#define BA0_PCICFG04                            0x00000304
+#define BA0_PCICFG08                            0x00000308
+#define BA0_PCICFG0C                            0x0000030C
+#define BA0_PCICFG10                            0x00000310
+#define BA0_PCICFG14                            0x00000314
+#define BA0_PCICFG18                            0x00000318
+#define BA0_PCICFG1C                            0x0000031C
+#define BA0_PCICFG20                            0x00000320
+#define BA0_PCICFG24                            0x00000324
+#define BA0_PCICFG28                            0x00000328
+#define BA0_PCICFG2C                            0x0000032C
+#define BA0_PCICFG30                            0x00000330
+#define BA0_PCICFG34                            0x00000334
+#define BA0_PCICFG38                            0x00000338
+#define BA0_PCICFG3C                            0x0000033C
+#define BA0_CLKCR1                              0x00000400
+#define BA0_CLKCR2                              0x00000404
+#define BA0_PLLM                                0x00000408
+#define BA0_PLLCC                               0x0000040C
+#define BA0_FRR                                 0x00000410 
+#define BA0_CFL1                                0x00000414
+#define BA0_CFL2                                0x00000418
+#define BA0_SERMC1                              0x00000420
+#define BA0_SERMC2                              0x00000424
+#define BA0_SERC1                               0x00000428
+#define BA0_SERC2                               0x0000042C
+#define BA0_SERC3                               0x00000430
+#define BA0_SERC4                               0x00000434
+#define BA0_SERC5                               0x00000438
+#define BA0_SERBSP                              0x0000043C
+#define BA0_SERBST                              0x00000440
+#define BA0_SERBCM                              0x00000444
+#define BA0_SERBAD                              0x00000448
+#define BA0_SERBCF                              0x0000044C
+#define BA0_SERBWP                              0x00000450
+#define BA0_SERBRP                              0x00000454
+#ifndef NO_CS4612
+#define BA0_ASER_FADDR                          0x00000458
+#endif
+#define BA0_ACCTL                               0x00000460
+#define BA0_ACSTS                               0x00000464
+#define BA0_ACOSV                               0x00000468
+#define BA0_ACCAD                               0x0000046C
+#define BA0_ACCDA                               0x00000470
+#define BA0_ACISV                               0x00000474
+#define BA0_ACSAD                               0x00000478
+#define BA0_ACSDA                               0x0000047C
+#define BA0_JSPT                                0x00000480
+#define BA0_JSCTL                               0x00000484
+#define BA0_JSC1                                0x00000488
+#define BA0_JSC2                                0x0000048C
+#define BA0_MIDCR                               0x00000490
+#define BA0_MIDSR                               0x00000494
+#define BA0_MIDWP                               0x00000498
+#define BA0_MIDRP                               0x0000049C
+#define BA0_JSIO                                0x000004A0
+#ifndef NO_CS4612
+#define BA0_ASER_MASTER                         0x000004A4
+#endif
+#define BA0_CFGI                                0x000004B0
+#define BA0_SSVID                               0x000004B4
+#define BA0_GPIOR                               0x000004B8
+#ifndef NO_CS4612
+#define BA0_EGPIODR                             0x000004BC
+#define BA0_EGPIOPTR                            0x000004C0
+#define BA0_EGPIOTR                             0x000004C4
+#define BA0_EGPIOWR                             0x000004C8
+#define BA0_EGPIOSR                             0x000004CC
+#define BA0_SERC6                               0x000004D0
+#define BA0_SERC7                               0x000004D4
+#define BA0_SERACC                              0x000004D8
+#define BA0_ACCTL2                              0x000004E0
+#define BA0_ACSTS2                              0x000004E4
+#define BA0_ACOSV2                              0x000004E8
+#define BA0_ACCAD2                              0x000004EC
+#define BA0_ACCDA2                              0x000004F0
+#define BA0_ACISV2                              0x000004F4
+#define BA0_ACSAD2                              0x000004F8
+#define BA0_ACSDA2                              0x000004FC
+#define BA0_IOTAC0                              0x00000500
+#define BA0_IOTAC1                              0x00000504
+#define BA0_IOTAC2                              0x00000508
+#define BA0_IOTAC3                              0x0000050C
+#define BA0_IOTAC4                              0x00000510
+#define BA0_IOTAC5                              0x00000514
+#define BA0_IOTAC6                              0x00000518
+#define BA0_IOTAC7                              0x0000051C
+#define BA0_IOTAC8                              0x00000520
+#define BA0_IOTAC9                              0x00000524
+#define BA0_IOTAC10                             0x00000528
+#define BA0_IOTAC11                             0x0000052C
+#define BA0_IOTFR0                              0x00000540
+#define BA0_IOTFR1                              0x00000544
+#define BA0_IOTFR2                              0x00000548
+#define BA0_IOTFR3                              0x0000054C
+#define BA0_IOTFR4                              0x00000550
+#define BA0_IOTFR5                              0x00000554
+#define BA0_IOTFR6                              0x00000558
+#define BA0_IOTFR7                              0x0000055C
+#define BA0_IOTFIFO                             0x00000580
+#define BA0_IOTRRD                              0x00000584
+#define BA0_IOTFP                               0x00000588
+#define BA0_IOTCR                               0x0000058C
+#define BA0_DPCID                               0x00000590
+#define BA0_DPCIA                               0x00000594
+#define BA0_DPCIC                               0x00000598
+#define BA0_PCPCIR                              0x00000600
+#define BA0_PCPCIG                              0x00000604
+#define BA0_PCPCIEN                             0x00000608
+#define BA0_EPCIPMC                             0x00000610
+#endif
+
+/*
+ *  The following define the offsets of the registers and memories accessed via
+ *  base address register one on the CS46xx part.
+ */
+#define BA1_SP_DMEM0                            0x00000000
+#define BA1_SP_DMEM1                            0x00010000
+#define BA1_SP_PMEM                             0x00020000
+#define BA1_SP_REG				0x00030000
+#define BA1_SPCR                                0x00030000
+#define BA1_DREG                                0x00030004
+#define BA1_DSRWP                               0x00030008
+#define BA1_TWPR                                0x0003000C
+#define BA1_SPWR                                0x00030010
+#define BA1_SPIR                                0x00030014
+#define BA1_FGR1                                0x00030020
+#define BA1_SPCS                                0x00030028
+#define BA1_SDSR                                0x0003002C
+#define BA1_FRMT                                0x00030030
+#define BA1_FRCC                                0x00030034
+#define BA1_FRSC                                0x00030038
+#define BA1_OMNI_MEM                            0x000E0000
+
+
+/*
+ *  The following defines are for the flags in the host interrupt status
+ *  register.
+ */
+#define HISR_VC_MASK                            0x0000FFFF
+#define HISR_VC0                                0x00000001
+#define HISR_VC1                                0x00000002
+#define HISR_VC2                                0x00000004
+#define HISR_VC3                                0x00000008
+#define HISR_VC4                                0x00000010
+#define HISR_VC5                                0x00000020
+#define HISR_VC6                                0x00000040
+#define HISR_VC7                                0x00000080
+#define HISR_VC8                                0x00000100
+#define HISR_VC9                                0x00000200
+#define HISR_VC10                               0x00000400
+#define HISR_VC11                               0x00000800
+#define HISR_VC12                               0x00001000
+#define HISR_VC13                               0x00002000
+#define HISR_VC14                               0x00004000
+#define HISR_VC15                               0x00008000
+#define HISR_INT0                               0x00010000
+#define HISR_INT1                               0x00020000
+#define HISR_DMAI                               0x00040000
+#define HISR_FROVR                              0x00080000
+#define HISR_MIDI                               0x00100000
+#ifdef NO_CS4612
+#define HISR_RESERVED                           0x0FE00000
+#else
+#define HISR_SBINT                              0x00200000
+#define HISR_RESERVED                           0x0FC00000
+#endif
+#define HISR_H0P                                0x40000000
+#define HISR_INTENA                             0x80000000
+
+/*
+ *  The following defines are for the flags in the host signal register 0.
+ */
+#define HSR0_VC_MASK                            0xFFFFFFFF
+#define HSR0_VC16                               0x00000001
+#define HSR0_VC17                               0x00000002
+#define HSR0_VC18                               0x00000004
+#define HSR0_VC19                               0x00000008
+#define HSR0_VC20                               0x00000010
+#define HSR0_VC21                               0x00000020
+#define HSR0_VC22                               0x00000040
+#define HSR0_VC23                               0x00000080
+#define HSR0_VC24                               0x00000100
+#define HSR0_VC25                               0x00000200
+#define HSR0_VC26                               0x00000400
+#define HSR0_VC27                               0x00000800
+#define HSR0_VC28                               0x00001000
+#define HSR0_VC29                               0x00002000
+#define HSR0_VC30                               0x00004000
+#define HSR0_VC31                               0x00008000
+#define HSR0_VC32                               0x00010000
+#define HSR0_VC33                               0x00020000
+#define HSR0_VC34                               0x00040000
+#define HSR0_VC35                               0x00080000
+#define HSR0_VC36                               0x00100000
+#define HSR0_VC37                               0x00200000
+#define HSR0_VC38                               0x00400000
+#define HSR0_VC39                               0x00800000
+#define HSR0_VC40                               0x01000000
+#define HSR0_VC41                               0x02000000
+#define HSR0_VC42                               0x04000000
+#define HSR0_VC43                               0x08000000
+#define HSR0_VC44                               0x10000000
+#define HSR0_VC45                               0x20000000
+#define HSR0_VC46                               0x40000000
+#define HSR0_VC47                               0x80000000
+
+/*
+ *  The following defines are for the flags in the host interrupt control
+ *  register.
+ */
+#define HICR_IEV                                0x00000001
+#define HICR_CHGM                               0x00000002
+
+/*
+ *  The following defines are for the flags in the DMA status register.
+ */
+#define DMSR_HP                                 0x00000001
+#define DMSR_HR                                 0x00000002
+#define DMSR_SP                                 0x00000004
+#define DMSR_SR                                 0x00000008
+
+/*
+ *  The following defines are for the flags in the host DMA source address
+ *  register.
+ */
+#define HSAR_HOST_ADDR_MASK                     0xFFFFFFFF
+#define HSAR_DSP_ADDR_MASK                      0x0000FFFF
+#define HSAR_MEMID_MASK                         0x000F0000
+#define HSAR_MEMID_SP_DMEM0                     0x00000000
+#define HSAR_MEMID_SP_DMEM1                     0x00010000
+#define HSAR_MEMID_SP_PMEM                      0x00020000
+#define HSAR_MEMID_SP_DEBUG                     0x00030000
+#define HSAR_MEMID_OMNI_MEM                     0x000E0000
+#define HSAR_END                                0x40000000
+#define HSAR_ERR                                0x80000000
+
+/*
+ *  The following defines are for the flags in the host DMA destination address
+ *  register.
+ */
+#define HDAR_HOST_ADDR_MASK                     0xFFFFFFFF
+#define HDAR_DSP_ADDR_MASK                      0x0000FFFF
+#define HDAR_MEMID_MASK                         0x000F0000
+#define HDAR_MEMID_SP_DMEM0                     0x00000000
+#define HDAR_MEMID_SP_DMEM1                     0x00010000
+#define HDAR_MEMID_SP_PMEM                      0x00020000
+#define HDAR_MEMID_SP_DEBUG                     0x00030000
+#define HDAR_MEMID_OMNI_MEM                     0x000E0000
+#define HDAR_END                                0x40000000
+#define HDAR_ERR                                0x80000000
+
+/*
+ *  The following defines are for the flags in the host DMA control register.
+ */
+#define HDMR_AC_MASK                            0x0000F000
+#define HDMR_AC_8_16                            0x00001000
+#define HDMR_AC_M_S                             0x00002000
+#define HDMR_AC_B_L                             0x00004000
+#define HDMR_AC_S_U                             0x00008000
+
+/*
+ *  The following defines are for the flags in the host DMA control register.
+ */
+#define HDCR_COUNT_MASK                         0x000003FF
+#define HDCR_DONE                               0x00004000
+#define HDCR_OPT                                0x00008000
+#define HDCR_WBD                                0x00400000
+#define HDCR_WBS                                0x00800000
+#define HDCR_DMS_MASK                           0x07000000
+#define HDCR_DMS_LINEAR                         0x00000000
+#define HDCR_DMS_16_DWORDS                      0x01000000
+#define HDCR_DMS_32_DWORDS                      0x02000000
+#define HDCR_DMS_64_DWORDS                      0x03000000
+#define HDCR_DMS_128_DWORDS                     0x04000000
+#define HDCR_DMS_256_DWORDS                     0x05000000
+#define HDCR_DMS_512_DWORDS                     0x06000000
+#define HDCR_DMS_1024_DWORDS                    0x07000000
+#define HDCR_DH                                 0x08000000
+#define HDCR_SMS_MASK                           0x70000000
+#define HDCR_SMS_LINEAR                         0x00000000
+#define HDCR_SMS_16_DWORDS                      0x10000000
+#define HDCR_SMS_32_DWORDS                      0x20000000
+#define HDCR_SMS_64_DWORDS                      0x30000000
+#define HDCR_SMS_128_DWORDS                     0x40000000
+#define HDCR_SMS_256_DWORDS                     0x50000000
+#define HDCR_SMS_512_DWORDS                     0x60000000
+#define HDCR_SMS_1024_DWORDS                    0x70000000
+#define HDCR_SH                                 0x80000000
+#define HDCR_COUNT_SHIFT                        0
+
+/*
+ *  The following defines are for the flags in the performance monitor control
+ *  register.
+ */
+#define PFMC_C1SS_MASK                          0x0000001F
+#define PFMC_C1EV                               0x00000020
+#define PFMC_C1RS                               0x00008000
+#define PFMC_C2SS_MASK                          0x001F0000
+#define PFMC_C2EV                               0x00200000
+#define PFMC_C2RS                               0x80000000
+#define PFMC_C1SS_SHIFT                         0
+#define PFMC_C2SS_SHIFT                         16
+#define PFMC_BUS_GRANT                          0
+#define PFMC_GRANT_AFTER_REQ                    1
+#define PFMC_TRANSACTION                        2
+#define PFMC_DWORD_TRANSFER                     3
+#define PFMC_SLAVE_READ                         4
+#define PFMC_SLAVE_WRITE                        5
+#define PFMC_PREEMPTION                         6
+#define PFMC_DISCONNECT_RETRY                   7
+#define PFMC_INTERRUPT                          8
+#define PFMC_BUS_OWNERSHIP                      9
+#define PFMC_TRANSACTION_LAG                    10
+#define PFMC_PCI_CLOCK                          11
+#define PFMC_SERIAL_CLOCK                       12
+#define PFMC_SP_CLOCK                           13
+
+/*
+ *  The following defines are for the flags in the performance counter value 1
+ *  register.
+ */
+#define PFCV1_PC1V_MASK                         0xFFFFFFFF
+#define PFCV1_PC1V_SHIFT                        0
+
+/*
+ *  The following defines are for the flags in the performance counter value 2
+ *  register.
+ */
+#define PFCV2_PC2V_MASK                         0xFFFFFFFF
+#define PFCV2_PC2V_SHIFT                        0
+
+/*
+ *  The following defines are for the flags in the clock control register 1.
+ */
+#define CLKCR1_OSCS                             0x00000001
+#define CLKCR1_OSCP                             0x00000002
+#define CLKCR1_PLLSS_MASK                       0x0000000C
+#define CLKCR1_PLLSS_SERIAL                     0x00000000
+#define CLKCR1_PLLSS_CRYSTAL                    0x00000004
+#define CLKCR1_PLLSS_PCI                        0x00000008
+#define CLKCR1_PLLSS_RESERVED                   0x0000000C
+#define CLKCR1_PLLP                             0x00000010
+#define CLKCR1_SWCE                             0x00000020
+#define CLKCR1_PLLOS                            0x00000040
+
+/*
+ *  The following defines are for the flags in the clock control register 2.
+ */
+#define CLKCR2_PDIVS_MASK                       0x0000000F
+#define CLKCR2_PDIVS_1                          0x00000001
+#define CLKCR2_PDIVS_2                          0x00000002
+#define CLKCR2_PDIVS_4                          0x00000004
+#define CLKCR2_PDIVS_7                          0x00000007
+#define CLKCR2_PDIVS_8                          0x00000008
+#define CLKCR2_PDIVS_16                         0x00000000
+
+/*
+ *  The following defines are for the flags in the PLL multiplier register.
+ */
+#define PLLM_MASK                               0x000000FF
+#define PLLM_SHIFT                              0
+
+/*
+ *  The following defines are for the flags in the PLL capacitor coefficient
+ *  register.
+ */
+#define PLLCC_CDR_MASK                          0x00000007
+#ifndef NO_CS4610
+#define PLLCC_CDR_240_350_MHZ                   0x00000000
+#define PLLCC_CDR_184_265_MHZ                   0x00000001
+#define PLLCC_CDR_144_205_MHZ                   0x00000002
+#define PLLCC_CDR_111_160_MHZ                   0x00000003
+#define PLLCC_CDR_87_123_MHZ                    0x00000004
+#define PLLCC_CDR_67_96_MHZ                     0x00000005
+#define PLLCC_CDR_52_74_MHZ                     0x00000006
+#define PLLCC_CDR_45_58_MHZ                     0x00000007
+#endif
+#ifndef NO_CS4612
+#define PLLCC_CDR_271_398_MHZ                   0x00000000
+#define PLLCC_CDR_227_330_MHZ                   0x00000001
+#define PLLCC_CDR_167_239_MHZ                   0x00000002
+#define PLLCC_CDR_150_215_MHZ                   0x00000003
+#define PLLCC_CDR_107_154_MHZ                   0x00000004
+#define PLLCC_CDR_98_140_MHZ                    0x00000005
+#define PLLCC_CDR_73_104_MHZ                    0x00000006
+#define PLLCC_CDR_63_90_MHZ                     0x00000007
+#endif
+#define PLLCC_LPF_MASK                          0x000000F8
+#ifndef NO_CS4610
+#define PLLCC_LPF_23850_60000_KHZ               0x00000000
+#define PLLCC_LPF_7960_26290_KHZ                0x00000008
+#define PLLCC_LPF_4160_10980_KHZ                0x00000018
+#define PLLCC_LPF_1740_4580_KHZ                 0x00000038
+#define PLLCC_LPF_724_1910_KHZ                  0x00000078
+#define PLLCC_LPF_317_798_KHZ                   0x000000F8
+#endif
+#ifndef NO_CS4612
+#define PLLCC_LPF_25580_64530_KHZ               0x00000000
+#define PLLCC_LPF_14360_37270_KHZ               0x00000008
+#define PLLCC_LPF_6100_16020_KHZ                0x00000018
+#define PLLCC_LPF_2540_6690_KHZ                 0x00000038
+#define PLLCC_LPF_1050_2780_KHZ                 0x00000078
+#define PLLCC_LPF_450_1160_KHZ                  0x000000F8
+#endif
+
+/*
+ *  The following defines are for the flags in the feature reporting register.
+ */
+#define FRR_FAB_MASK                            0x00000003
+#define FRR_MASK_MASK                           0x0000001C
+#ifdef NO_CS4612
+#define FRR_CFOP_MASK                           0x000000E0
+#else
+#define FRR_CFOP_MASK                           0x00000FE0
+#endif
+#define FRR_CFOP_NOT_DVD                        0x00000020
+#define FRR_CFOP_A3D                            0x00000040
+#define FRR_CFOP_128_PIN                        0x00000080
+#ifndef NO_CS4612
+#define FRR_CFOP_CS4280                         0x00000800
+#endif
+#define FRR_FAB_SHIFT                           0
+#define FRR_MASK_SHIFT                          2
+#define FRR_CFOP_SHIFT                          5
+
+/*
+ *  The following defines are for the flags in the configuration load 1
+ *  register.
+ */
+#define CFL1_CLOCK_SOURCE_MASK                  0x00000003
+#define CFL1_CLOCK_SOURCE_CS423X                0x00000000
+#define CFL1_CLOCK_SOURCE_AC97                  0x00000001
+#define CFL1_CLOCK_SOURCE_CRYSTAL               0x00000002
+#define CFL1_CLOCK_SOURCE_DUAL_AC97             0x00000003
+#define CFL1_VALID_DATA_MASK                    0x000000FF
+
+/*
+ *  The following defines are for the flags in the configuration load 2
+ *  register.
+ */
+#define CFL2_VALID_DATA_MASK                    0x000000FF
+
+/*
+ *  The following defines are for the flags in the serial port master control
+ *  register 1.
+ */
+#define SERMC1_MSPE                             0x00000001
+#define SERMC1_PTC_MASK                         0x0000000E
+#define SERMC1_PTC_CS423X                       0x00000000
+#define SERMC1_PTC_AC97                         0x00000002
+#define SERMC1_PTC_DAC                          0x00000004
+#define SERMC1_PLB                              0x00000010
+#define SERMC1_XLB                              0x00000020
+
+/*
+ *  The following defines are for the flags in the serial port master control
+ *  register 2.
+ */
+#define SERMC2_LROE                             0x00000001
+#define SERMC2_MCOE                             0x00000002
+#define SERMC2_MCDIV                            0x00000004
+
+/*
+ *  The following defines are for the flags in the serial port 1 configuration
+ *  register.
+ */
+#define SERC1_SO1EN                             0x00000001
+#define SERC1_SO1F_MASK                         0x0000000E
+#define SERC1_SO1F_CS423X                       0x00000000
+#define SERC1_SO1F_AC97                         0x00000002
+#define SERC1_SO1F_DAC                          0x00000004
+#define SERC1_SO1F_SPDIF                        0x00000006
+
+/*
+ *  The following defines are for the flags in the serial port 2 configuration
+ *  register.
+ */
+#define SERC2_SI1EN                             0x00000001
+#define SERC2_SI1F_MASK                         0x0000000E
+#define SERC2_SI1F_CS423X                       0x00000000
+#define SERC2_SI1F_AC97                         0x00000002
+#define SERC2_SI1F_ADC                          0x00000004
+#define SERC2_SI1F_SPDIF                        0x00000006
+
+/*
+ *  The following defines are for the flags in the serial port 3 configuration
+ *  register.
+ */
+#define SERC3_SO2EN                             0x00000001
+#define SERC3_SO2F_MASK                         0x00000006
+#define SERC3_SO2F_DAC                          0x00000000
+#define SERC3_SO2F_SPDIF                        0x00000002
+
+/*
+ *  The following defines are for the flags in the serial port 4 configuration
+ *  register.
+ */
+#define SERC4_SO3EN                             0x00000001
+#define SERC4_SO3F_MASK                         0x00000006
+#define SERC4_SO3F_DAC                          0x00000000
+#define SERC4_SO3F_SPDIF                        0x00000002
+
+/*
+ *  The following defines are for the flags in the serial port 5 configuration
+ *  register.
+ */
+#define SERC5_SI2EN                             0x00000001
+#define SERC5_SI2F_MASK                         0x00000006
+#define SERC5_SI2F_ADC                          0x00000000
+#define SERC5_SI2F_SPDIF                        0x00000002
+
+/*
+ *  The following defines are for the flags in the serial port backdoor sample
+ *  pointer register.
+ */
+#define SERBSP_FSP_MASK                         0x0000000F
+#define SERBSP_FSP_SHIFT                        0
+
+/*
+ *  The following defines are for the flags in the serial port backdoor status
+ *  register.
+ */
+#define SERBST_RRDY                             0x00000001
+#define SERBST_WBSY                             0x00000002
+
+/*
+ *  The following defines are for the flags in the serial port backdoor command
+ *  register.
+ */
+#define SERBCM_RDC                              0x00000001
+#define SERBCM_WRC                              0x00000002
+
+/*
+ *  The following defines are for the flags in the serial port backdoor address
+ *  register.
+ */
+#ifdef NO_CS4612
+#define SERBAD_FAD_MASK                         0x000000FF
+#else
+#define SERBAD_FAD_MASK                         0x000001FF
+#endif
+#define SERBAD_FAD_SHIFT                        0
+
+/*
+ *  The following defines are for the flags in the serial port backdoor
+ *  configuration register.
+ */
+#define SERBCF_HBP                              0x00000001
+
+/*
+ *  The following defines are for the flags in the serial port backdoor write
+ *  port register.
+ */
+#define SERBWP_FWD_MASK                         0x000FFFFF
+#define SERBWP_FWD_SHIFT                        0
+
+/*
+ *  The following defines are for the flags in the serial port backdoor read
+ *  port register.
+ */
+#define SERBRP_FRD_MASK                         0x000FFFFF
+#define SERBRP_FRD_SHIFT                        0
+
+/*
+ *  The following defines are for the flags in the async FIFO address register.
+ */
+#ifndef NO_CS4612
+#define ASER_FADDR_A1_MASK                      0x000001FF
+#define ASER_FADDR_EN1                          0x00008000
+#define ASER_FADDR_A2_MASK                      0x01FF0000
+#define ASER_FADDR_EN2                          0x80000000
+#define ASER_FADDR_A1_SHIFT                     0
+#define ASER_FADDR_A2_SHIFT                     16
+#endif
+
+/*
+ *  The following defines are for the flags in the AC97 control register.
+ */
+#define ACCTL_RSTN                              0x00000001
+#define ACCTL_ESYN                              0x00000002
+#define ACCTL_VFRM                              0x00000004
+#define ACCTL_DCV                               0x00000008
+#define ACCTL_CRW                               0x00000010
+#define ACCTL_ASYN                              0x00000020
+#ifndef NO_CS4612
+#define ACCTL_TC                                0x00000040
+#endif
+
+/*
+ *  The following defines are for the flags in the AC97 status register.
+ */
+#define ACSTS_CRDY                              0x00000001
+#define ACSTS_VSTS                              0x00000002
+#ifndef NO_CS4612
+#define ACSTS_WKUP                              0x00000004
+#endif
+
+/*
+ *  The following defines are for the flags in the AC97 output slot valid
+ *  register.
+ */
+#define ACOSV_SLV3                              0x00000001
+#define ACOSV_SLV4                              0x00000002
+#define ACOSV_SLV5                              0x00000004
+#define ACOSV_SLV6                              0x00000008
+#define ACOSV_SLV7                              0x00000010
+#define ACOSV_SLV8                              0x00000020
+#define ACOSV_SLV9                              0x00000040
+#define ACOSV_SLV10                             0x00000080
+#define ACOSV_SLV11                             0x00000100
+#define ACOSV_SLV12                             0x00000200
+
+/*
+ *  The following defines are for the flags in the AC97 command address
+ *  register.
+ */
+#define ACCAD_CI_MASK                           0x0000007F
+#define ACCAD_CI_SHIFT                          0
+
+/*
+ *  The following defines are for the flags in the AC97 command data register.
+ */
+#define ACCDA_CD_MASK                           0x0000FFFF
+#define ACCDA_CD_SHIFT                          0
+
+/*
+ *  The following defines are for the flags in the AC97 input slot valid
+ *  register.
+ */
+#define ACISV_ISV3                              0x00000001
+#define ACISV_ISV4                              0x00000002
+#define ACISV_ISV5                              0x00000004
+#define ACISV_ISV6                              0x00000008
+#define ACISV_ISV7                              0x00000010
+#define ACISV_ISV8                              0x00000020
+#define ACISV_ISV9                              0x00000040
+#define ACISV_ISV10                             0x00000080
+#define ACISV_ISV11                             0x00000100
+#define ACISV_ISV12                             0x00000200
+
+/*
+ *  The following defines are for the flags in the AC97 status address
+ *  register.
+ */
+#define ACSAD_SI_MASK                           0x0000007F
+#define ACSAD_SI_SHIFT                          0
+
+/*
+ *  The following defines are for the flags in the AC97 status data register.
+ */
+#define ACSDA_SD_MASK                           0x0000FFFF
+#define ACSDA_SD_SHIFT                          0
+
+/*
+ *  The following defines are for the flags in the joystick poll/trigger
+ *  register.
+ */
+#define JSPT_CAX                                0x00000001
+#define JSPT_CAY                                0x00000002
+#define JSPT_CBX                                0x00000004
+#define JSPT_CBY                                0x00000008
+#define JSPT_BA1                                0x00000010
+#define JSPT_BA2                                0x00000020
+#define JSPT_BB1                                0x00000040
+#define JSPT_BB2                                0x00000080
+
+/*
+ *  The following defines are for the flags in the joystick control register.
+ */
+#define JSCTL_SP_MASK                           0x00000003
+#define JSCTL_SP_SLOW                           0x00000000
+#define JSCTL_SP_MEDIUM_SLOW                    0x00000001
+#define JSCTL_SP_MEDIUM_FAST                    0x00000002
+#define JSCTL_SP_FAST                           0x00000003
+#define JSCTL_ARE                               0x00000004
+
+/*
+ *  The following defines are for the flags in the joystick coordinate pair 1
+ *  readback register.
+ */
+#define JSC1_Y1V_MASK                           0x0000FFFF
+#define JSC1_X1V_MASK                           0xFFFF0000
+#define JSC1_Y1V_SHIFT                          0
+#define JSC1_X1V_SHIFT                          16
+
+/*
+ *  The following defines are for the flags in the joystick coordinate pair 2
+ *  readback register.
+ */
+#define JSC2_Y2V_MASK                           0x0000FFFF
+#define JSC2_X2V_MASK                           0xFFFF0000
+#define JSC2_Y2V_SHIFT                          0
+#define JSC2_X2V_SHIFT                          16
+
+/*
+ *  The following defines are for the flags in the MIDI control register.
+ */
+#define MIDCR_TXE                               0x00000001	/* Enable transmitting. */
+#define MIDCR_RXE                               0x00000002	/* Enable receiving. */
+#define MIDCR_RIE                               0x00000004	/* Interrupt upon tx ready. */
+#define MIDCR_TIE                               0x00000008	/* Interrupt upon rx ready. */
+#define MIDCR_MLB                               0x00000010	/* Enable midi loopback. */
+#define MIDCR_MRST                              0x00000020	/* Reset interface. */
+
+/*
+ *  The following defines are for the flags in the MIDI status register.
+ */
+#define MIDSR_TBF                               0x00000001	/* Tx FIFO is full. */
+#define MIDSR_RBE                               0x00000002	/* Rx FIFO is empty. */
+
+/*
+ *  The following defines are for the flags in the MIDI write port register.
+ */
+#define MIDWP_MWD_MASK                          0x000000FF
+#define MIDWP_MWD_SHIFT                         0
+
+/*
+ *  The following defines are for the flags in the MIDI read port register.
+ */
+#define MIDRP_MRD_MASK                          0x000000FF
+#define MIDRP_MRD_SHIFT                         0
+
+/*
+ *  The following defines are for the flags in the joystick GPIO register.
+ */
+#define JSIO_DAX                                0x00000001
+#define JSIO_DAY                                0x00000002
+#define JSIO_DBX                                0x00000004
+#define JSIO_DBY                                0x00000008
+#define JSIO_AXOE                               0x00000010
+#define JSIO_AYOE                               0x00000020
+#define JSIO_BXOE                               0x00000040
+#define JSIO_BYOE                               0x00000080
+
+/*
+ *  The following defines are for the flags in the master async/sync serial
+ *  port enable register.
+ */
+#ifndef NO_CS4612
+#define ASER_MASTER_ME                          0x00000001
+#endif
+
+/*
+ *  The following defines are for the flags in the configuration interface
+ *  register.
+ */
+#define CFGI_CLK                                0x00000001
+#define CFGI_DOUT                               0x00000002
+#define CFGI_DIN_EEN                            0x00000004
+#define CFGI_EELD                               0x00000008
+
+/*
+ *  The following defines are for the flags in the subsystem ID and vendor ID
+ *  register.
+ */
+#define SSVID_VID_MASK                          0x0000FFFF
+#define SSVID_SID_MASK                          0xFFFF0000
+#define SSVID_VID_SHIFT                         0
+#define SSVID_SID_SHIFT                         16
+
+/*
+ *  The following defines are for the flags in the GPIO pin interface register.
+ */
+#define GPIOR_VOLDN                             0x00000001
+#define GPIOR_VOLUP                             0x00000002
+#define GPIOR_SI2D                              0x00000004
+#define GPIOR_SI2OE                             0x00000008
+
+/*
+ *  The following defines are for the flags in the extended GPIO pin direction
+ *  register.
+ */
+#ifndef NO_CS4612
+#define EGPIODR_GPOE0                           0x00000001
+#define EGPIODR_GPOE1                           0x00000002
+#define EGPIODR_GPOE2                           0x00000004
+#define EGPIODR_GPOE3                           0x00000008
+#define EGPIODR_GPOE4                           0x00000010
+#define EGPIODR_GPOE5                           0x00000020
+#define EGPIODR_GPOE6                           0x00000040
+#define EGPIODR_GPOE7                           0x00000080
+#define EGPIODR_GPOE8                           0x00000100
+#endif
+
+/*
+ *  The following defines are for the flags in the extended GPIO pin polarity/
+ *  type register.
+ */
+#ifndef NO_CS4612
+#define EGPIOPTR_GPPT0                          0x00000001
+#define EGPIOPTR_GPPT1                          0x00000002
+#define EGPIOPTR_GPPT2                          0x00000004
+#define EGPIOPTR_GPPT3                          0x00000008
+#define EGPIOPTR_GPPT4                          0x00000010
+#define EGPIOPTR_GPPT5                          0x00000020
+#define EGPIOPTR_GPPT6                          0x00000040
+#define EGPIOPTR_GPPT7                          0x00000080
+#define EGPIOPTR_GPPT8                          0x00000100
+#endif
+
+/*
+ *  The following defines are for the flags in the extended GPIO pin sticky
+ *  register.
+ */
+#ifndef NO_CS4612
+#define EGPIOTR_GPS0                            0x00000001
+#define EGPIOTR_GPS1                            0x00000002
+#define EGPIOTR_GPS2                            0x00000004
+#define EGPIOTR_GPS3                            0x00000008
+#define EGPIOTR_GPS4                            0x00000010
+#define EGPIOTR_GPS5                            0x00000020
+#define EGPIOTR_GPS6                            0x00000040
+#define EGPIOTR_GPS7                            0x00000080
+#define EGPIOTR_GPS8                            0x00000100
+#endif
+
+/*
+ *  The following defines are for the flags in the extended GPIO ping wakeup
+ *  register.
+ */
+#ifndef NO_CS4612
+#define EGPIOWR_GPW0                            0x00000001
+#define EGPIOWR_GPW1                            0x00000002
+#define EGPIOWR_GPW2                            0x00000004
+#define EGPIOWR_GPW3                            0x00000008
+#define EGPIOWR_GPW4                            0x00000010
+#define EGPIOWR_GPW5                            0x00000020
+#define EGPIOWR_GPW6                            0x00000040
+#define EGPIOWR_GPW7                            0x00000080
+#define EGPIOWR_GPW8                            0x00000100
+#endif
+
+/*
+ *  The following defines are for the flags in the extended GPIO pin status
+ *  register.
+ */
+#ifndef NO_CS4612
+#define EGPIOSR_GPS0                            0x00000001
+#define EGPIOSR_GPS1                            0x00000002
+#define EGPIOSR_GPS2                            0x00000004
+#define EGPIOSR_GPS3                            0x00000008
+#define EGPIOSR_GPS4                            0x00000010
+#define EGPIOSR_GPS5                            0x00000020
+#define EGPIOSR_GPS6                            0x00000040
+#define EGPIOSR_GPS7                            0x00000080
+#define EGPIOSR_GPS8                            0x00000100
+#endif
+
+/*
+ *  The following defines are for the flags in the serial port 6 configuration
+ *  register.
+ */
+#ifndef NO_CS4612
+#define SERC6_ASDO2EN                           0x00000001
+#endif
+
+/*
+ *  The following defines are for the flags in the serial port 7 configuration
+ *  register.
+ */
+#ifndef NO_CS4612
+#define SERC7_ASDI2EN                           0x00000001
+#define SERC7_POSILB                            0x00000002
+#define SERC7_SIPOLB                            0x00000004
+#define SERC7_SOSILB                            0x00000008
+#define SERC7_SISOLB                            0x00000010
+#endif
+
+/*
+ *  The following defines are for the flags in the serial port AC link
+ *  configuration register.
+ */
+#ifndef NO_CS4612
+#define SERACC_CHIP_TYPE_MASK                  0x00000001
+#define SERACC_CHIP_TYPE_1_03                  0x00000000
+#define SERACC_CHIP_TYPE_2_0                   0x00000001
+#define SERACC_TWO_CODECS                      0x00000002
+#define SERACC_MDM                             0x00000004
+#define SERACC_HSP                             0x00000008
+#define SERACC_ODT                             0x00000010 /* only CS4630 */
+#endif
+
+/*
+ *  The following defines are for the flags in the AC97 control register 2.
+ */
+#ifndef NO_CS4612
+#define ACCTL2_RSTN                             0x00000001
+#define ACCTL2_ESYN                             0x00000002
+#define ACCTL2_VFRM                             0x00000004
+#define ACCTL2_DCV                              0x00000008
+#define ACCTL2_CRW                              0x00000010
+#define ACCTL2_ASYN                             0x00000020
+#endif
+
+/*
+ *  The following defines are for the flags in the AC97 status register 2.
+ */
+#ifndef NO_CS4612
+#define ACSTS2_CRDY                             0x00000001
+#define ACSTS2_VSTS                             0x00000002
+#endif
+
+/*
+ *  The following defines are for the flags in the AC97 output slot valid
+ *  register 2.
+ */
+#ifndef NO_CS4612
+#define ACOSV2_SLV3                             0x00000001
+#define ACOSV2_SLV4                             0x00000002
+#define ACOSV2_SLV5                             0x00000004
+#define ACOSV2_SLV6                             0x00000008
+#define ACOSV2_SLV7                             0x00000010
+#define ACOSV2_SLV8                             0x00000020
+#define ACOSV2_SLV9                             0x00000040
+#define ACOSV2_SLV10                            0x00000080
+#define ACOSV2_SLV11                            0x00000100
+#define ACOSV2_SLV12                            0x00000200
+#endif
+
+/*
+ *  The following defines are for the flags in the AC97 command address
+ *  register 2.
+ */
+#ifndef NO_CS4612
+#define ACCAD2_CI_MASK                          0x0000007F
+#define ACCAD2_CI_SHIFT                         0
+#endif
+
+/*
+ *  The following defines are for the flags in the AC97 command data register
+ *  2.
+ */
+#ifndef NO_CS4612
+#define ACCDA2_CD_MASK                          0x0000FFFF
+#define ACCDA2_CD_SHIFT                         0  
+#endif
+
+/*
+ *  The following defines are for the flags in the AC97 input slot valid
+ *  register 2.
+ */
+#ifndef NO_CS4612
+#define ACISV2_ISV3                             0x00000001
+#define ACISV2_ISV4                             0x00000002
+#define ACISV2_ISV5                             0x00000004
+#define ACISV2_ISV6                             0x00000008
+#define ACISV2_ISV7                             0x00000010
+#define ACISV2_ISV8                             0x00000020
+#define ACISV2_ISV9                             0x00000040
+#define ACISV2_ISV10                            0x00000080
+#define ACISV2_ISV11                            0x00000100
+#define ACISV2_ISV12                            0x00000200
+#endif
+
+/*
+ *  The following defines are for the flags in the AC97 status address
+ *  register 2.
+ */
+#ifndef NO_CS4612
+#define ACSAD2_SI_MASK                          0x0000007F
+#define ACSAD2_SI_SHIFT                         0
+#endif
+
+/*
+ *  The following defines are for the flags in the AC97 status data register 2.
+ */
+#ifndef NO_CS4612
+#define ACSDA2_SD_MASK                          0x0000FFFF
+#define ACSDA2_SD_SHIFT                         0
+#endif
+
+/*
+ *  The following defines are for the flags in the I/O trap address and control
+ *  registers (all 12).
+ */
+#ifndef NO_CS4612
+#define IOTAC_SA_MASK                           0x0000FFFF
+#define IOTAC_MSK_MASK                          0x000F0000
+#define IOTAC_IODC_MASK                         0x06000000
+#define IOTAC_IODC_16_BIT                       0x00000000
+#define IOTAC_IODC_10_BIT                       0x02000000
+#define IOTAC_IODC_12_BIT                       0x04000000
+#define IOTAC_WSPI                              0x08000000
+#define IOTAC_RSPI                              0x10000000
+#define IOTAC_WSE                               0x20000000
+#define IOTAC_WE                                0x40000000
+#define IOTAC_RE                                0x80000000
+#define IOTAC_SA_SHIFT                          0
+#define IOTAC_MSK_SHIFT                         16
+#endif
+
+/*
+ *  The following defines are for the flags in the I/O trap fast read registers
+ *  (all 8).
+ */
+#ifndef NO_CS4612
+#define IOTFR_D_MASK                            0x0000FFFF
+#define IOTFR_A_MASK                            0x000F0000
+#define IOTFR_R_MASK                            0x0F000000
+#define IOTFR_ALL                               0x40000000
+#define IOTFR_VL                                0x80000000
+#define IOTFR_D_SHIFT                           0
+#define IOTFR_A_SHIFT                           16
+#define IOTFR_R_SHIFT                           24
+#endif
+
+/*
+ *  The following defines are for the flags in the I/O trap FIFO register.
+ */
+#ifndef NO_CS4612
+#define IOTFIFO_BA_MASK                         0x00003FFF
+#define IOTFIFO_S_MASK                          0x00FF0000
+#define IOTFIFO_OF                              0x40000000
+#define IOTFIFO_SPIOF                           0x80000000
+#define IOTFIFO_BA_SHIFT                        0
+#define IOTFIFO_S_SHIFT                         16
+#endif
+
+/*
+ *  The following defines are for the flags in the I/O trap retry read data
+ *  register.
+ */
+#ifndef NO_CS4612
+#define IOTRRD_D_MASK                           0x0000FFFF
+#define IOTRRD_RDV                              0x80000000
+#define IOTRRD_D_SHIFT                          0
+#endif
+
+/*
+ *  The following defines are for the flags in the I/O trap FIFO pointer
+ *  register.
+ */
+#ifndef NO_CS4612
+#define IOTFP_CA_MASK                           0x00003FFF
+#define IOTFP_PA_MASK                           0x3FFF0000
+#define IOTFP_CA_SHIFT                          0
+#define IOTFP_PA_SHIFT                          16
+#endif
+
+/*
+ *  The following defines are for the flags in the I/O trap control register.
+ */
+#ifndef NO_CS4612
+#define IOTCR_ITD                               0x00000001
+#define IOTCR_HRV                               0x00000002
+#define IOTCR_SRV                               0x00000004
+#define IOTCR_DTI                               0x00000008
+#define IOTCR_DFI                               0x00000010
+#define IOTCR_DDP                               0x00000020
+#define IOTCR_JTE                               0x00000040
+#define IOTCR_PPE                               0x00000080
+#endif
+
+/*
+ *  The following defines are for the flags in the direct PCI data register.
+ */
+#ifndef NO_CS4612
+#define DPCID_D_MASK                            0xFFFFFFFF
+#define DPCID_D_SHIFT                           0
+#endif
+
+/*
+ *  The following defines are for the flags in the direct PCI address register.
+ */
+#ifndef NO_CS4612
+#define DPCIA_A_MASK                            0xFFFFFFFF
+#define DPCIA_A_SHIFT                           0
+#endif
+
+/*
+ *  The following defines are for the flags in the direct PCI command register.
+ */
+#ifndef NO_CS4612
+#define DPCIC_C_MASK                            0x0000000F
+#define DPCIC_C_IOREAD                          0x00000002
+#define DPCIC_C_IOWRITE                         0x00000003
+#define DPCIC_BE_MASK                           0x000000F0
+#endif
+
+/*
+ *  The following defines are for the flags in the PC/PCI request register.
+ */
+#ifndef NO_CS4612
+#define PCPCIR_RDC_MASK                         0x00000007
+#define PCPCIR_C_MASK                           0x00007000
+#define PCPCIR_REQ                              0x00008000
+#define PCPCIR_RDC_SHIFT                        0
+#define PCPCIR_C_SHIFT                          12
+#endif
+
+/*
+ *  The following defines are for the flags in the PC/PCI grant register.
+ */ 
+#ifndef NO_CS4612
+#define PCPCIG_GDC_MASK                         0x00000007
+#define PCPCIG_VL                               0x00008000
+#define PCPCIG_GDC_SHIFT                        0
+#endif
+
+/*
+ *  The following defines are for the flags in the PC/PCI master enable
+ *  register.
+ */
+#ifndef NO_CS4612
+#define PCPCIEN_EN                              0x00000001
+#endif
+
+/*
+ *  The following defines are for the flags in the extended PCI power
+ *  management control register.
+ */
+#ifndef NO_CS4612
+#define EPCIPMC_GWU                             0x00000001
+#define EPCIPMC_FSPC                            0x00000002
+#endif 
+
+/*
+ *  The following defines are for the flags in the SP control register.
+ */
+#define SPCR_RUN                                0x00000001
+#define SPCR_STPFR                              0x00000002
+#define SPCR_RUNFR                              0x00000004
+#define SPCR_TICK                               0x00000008
+#define SPCR_DRQEN                              0x00000020
+#define SPCR_RSTSP                              0x00000040
+#define SPCR_OREN                               0x00000080
+#ifndef NO_CS4612
+#define SPCR_PCIINT                             0x00000100
+#define SPCR_OINTD                              0x00000200
+#define SPCR_CRE                                0x00008000
+#endif
+
+/*
+ *  The following defines are for the flags in the debug index register.
+ */
+#define DREG_REGID_MASK                         0x0000007F
+#define DREG_DEBUG                              0x00000080
+#define DREG_RGBK_MASK                          0x00000700
+#define DREG_TRAP                               0x00000800
+#if !defined(NO_CS4612)
+#if !defined(NO_CS4615)
+#define DREG_TRAPX                              0x00001000
+#endif
+#endif
+#define DREG_REGID_SHIFT                        0
+#define DREG_RGBK_SHIFT                         8
+#define DREG_RGBK_REGID_MASK                    0x0000077F
+#define DREG_REGID_R0                           0x00000010
+#define DREG_REGID_R1                           0x00000011
+#define DREG_REGID_R2                           0x00000012
+#define DREG_REGID_R3                           0x00000013
+#define DREG_REGID_R4                           0x00000014
+#define DREG_REGID_R5                           0x00000015
+#define DREG_REGID_R6                           0x00000016
+#define DREG_REGID_R7                           0x00000017
+#define DREG_REGID_R8                           0x00000018
+#define DREG_REGID_R9                           0x00000019
+#define DREG_REGID_RA                           0x0000001A
+#define DREG_REGID_RB                           0x0000001B
+#define DREG_REGID_RC                           0x0000001C
+#define DREG_REGID_RD                           0x0000001D
+#define DREG_REGID_RE                           0x0000001E
+#define DREG_REGID_RF                           0x0000001F
+#define DREG_REGID_RA_BUS_LOW                   0x00000020
+#define DREG_REGID_RA_BUS_HIGH                  0x00000038
+#define DREG_REGID_YBUS_LOW                     0x00000050
+#define DREG_REGID_YBUS_HIGH                    0x00000058
+#define DREG_REGID_TRAP_0                       0x00000100
+#define DREG_REGID_TRAP_1                       0x00000101
+#define DREG_REGID_TRAP_2                       0x00000102
+#define DREG_REGID_TRAP_3                       0x00000103
+#define DREG_REGID_TRAP_4                       0x00000104
+#define DREG_REGID_TRAP_5                       0x00000105
+#define DREG_REGID_TRAP_6                       0x00000106
+#define DREG_REGID_TRAP_7                       0x00000107
+#define DREG_REGID_INDIRECT_ADDRESS             0x0000010E
+#define DREG_REGID_TOP_OF_STACK                 0x0000010F
+#if !defined(NO_CS4612)
+#if !defined(NO_CS4615)
+#define DREG_REGID_TRAP_8                       0x00000110
+#define DREG_REGID_TRAP_9                       0x00000111
+#define DREG_REGID_TRAP_10                      0x00000112
+#define DREG_REGID_TRAP_11                      0x00000113
+#define DREG_REGID_TRAP_12                      0x00000114
+#define DREG_REGID_TRAP_13                      0x00000115
+#define DREG_REGID_TRAP_14                      0x00000116
+#define DREG_REGID_TRAP_15                      0x00000117
+#define DREG_REGID_TRAP_16                      0x00000118
+#define DREG_REGID_TRAP_17                      0x00000119
+#define DREG_REGID_TRAP_18                      0x0000011A
+#define DREG_REGID_TRAP_19                      0x0000011B
+#define DREG_REGID_TRAP_20                      0x0000011C
+#define DREG_REGID_TRAP_21                      0x0000011D
+#define DREG_REGID_TRAP_22                      0x0000011E
+#define DREG_REGID_TRAP_23                      0x0000011F
+#endif
+#endif
+#define DREG_REGID_RSA0_LOW                     0x00000200
+#define DREG_REGID_RSA0_HIGH                    0x00000201
+#define DREG_REGID_RSA1_LOW                     0x00000202
+#define DREG_REGID_RSA1_HIGH                    0x00000203
+#define DREG_REGID_RSA2                         0x00000204
+#define DREG_REGID_RSA3                         0x00000205
+#define DREG_REGID_RSI0_LOW                     0x00000206
+#define DREG_REGID_RSI0_HIGH                    0x00000207
+#define DREG_REGID_RSI1                         0x00000208
+#define DREG_REGID_RSI2                         0x00000209
+#define DREG_REGID_SAGUSTATUS                   0x0000020A
+#define DREG_REGID_RSCONFIG01_LOW               0x0000020B
+#define DREG_REGID_RSCONFIG01_HIGH              0x0000020C
+#define DREG_REGID_RSCONFIG23_LOW               0x0000020D
+#define DREG_REGID_RSCONFIG23_HIGH              0x0000020E
+#define DREG_REGID_RSDMA01E                     0x0000020F
+#define DREG_REGID_RSDMA23E                     0x00000210
+#define DREG_REGID_RSD0_LOW                     0x00000211
+#define DREG_REGID_RSD0_HIGH                    0x00000212
+#define DREG_REGID_RSD1_LOW                     0x00000213
+#define DREG_REGID_RSD1_HIGH                    0x00000214
+#define DREG_REGID_RSD2_LOW                     0x00000215
+#define DREG_REGID_RSD2_HIGH                    0x00000216
+#define DREG_REGID_RSD3_LOW                     0x00000217
+#define DREG_REGID_RSD3_HIGH                    0x00000218
+#define DREG_REGID_SRAR_HIGH                    0x0000021A
+#define DREG_REGID_SRAR_LOW                     0x0000021B
+#define DREG_REGID_DMA_STATE                    0x0000021C
+#define DREG_REGID_CURRENT_DMA_STREAM           0x0000021D
+#define DREG_REGID_NEXT_DMA_STREAM              0x0000021E
+#define DREG_REGID_CPU_STATUS                   0x00000300
+#define DREG_REGID_MAC_MODE                     0x00000301
+#define DREG_REGID_STACK_AND_REPEAT             0x00000302
+#define DREG_REGID_INDEX0                       0x00000304
+#define DREG_REGID_INDEX1                       0x00000305
+#define DREG_REGID_DMA_STATE_0_3                0x00000400
+#define DREG_REGID_DMA_STATE_4_7                0x00000404
+#define DREG_REGID_DMA_STATE_8_11               0x00000408
+#define DREG_REGID_DMA_STATE_12_15              0x0000040C
+#define DREG_REGID_DMA_STATE_16_19              0x00000410
+#define DREG_REGID_DMA_STATE_20_23              0x00000414
+#define DREG_REGID_DMA_STATE_24_27              0x00000418
+#define DREG_REGID_DMA_STATE_28_31              0x0000041C
+#define DREG_REGID_DMA_STATE_32_35              0x00000420
+#define DREG_REGID_DMA_STATE_36_39              0x00000424
+#define DREG_REGID_DMA_STATE_40_43              0x00000428
+#define DREG_REGID_DMA_STATE_44_47              0x0000042C
+#define DREG_REGID_DMA_STATE_48_51              0x00000430
+#define DREG_REGID_DMA_STATE_52_55              0x00000434
+#define DREG_REGID_DMA_STATE_56_59              0x00000438
+#define DREG_REGID_DMA_STATE_60_63              0x0000043C
+#define DREG_REGID_DMA_STATE_64_67              0x00000440
+#define DREG_REGID_DMA_STATE_68_71              0x00000444
+#define DREG_REGID_DMA_STATE_72_75              0x00000448
+#define DREG_REGID_DMA_STATE_76_79              0x0000044C
+#define DREG_REGID_DMA_STATE_80_83              0x00000450
+#define DREG_REGID_DMA_STATE_84_87              0x00000454
+#define DREG_REGID_DMA_STATE_88_91              0x00000458
+#define DREG_REGID_DMA_STATE_92_95              0x0000045C
+#define DREG_REGID_TRAP_SELECT                  0x00000500
+#define DREG_REGID_TRAP_WRITE_0                 0x00000500
+#define DREG_REGID_TRAP_WRITE_1                 0x00000501
+#define DREG_REGID_TRAP_WRITE_2                 0x00000502
+#define DREG_REGID_TRAP_WRITE_3                 0x00000503
+#define DREG_REGID_TRAP_WRITE_4                 0x00000504
+#define DREG_REGID_TRAP_WRITE_5                 0x00000505
+#define DREG_REGID_TRAP_WRITE_6                 0x00000506
+#define DREG_REGID_TRAP_WRITE_7                 0x00000507
+#if !defined(NO_CS4612)
+#if !defined(NO_CS4615)
+#define DREG_REGID_TRAP_WRITE_8                 0x00000510
+#define DREG_REGID_TRAP_WRITE_9                 0x00000511
+#define DREG_REGID_TRAP_WRITE_10                0x00000512
+#define DREG_REGID_TRAP_WRITE_11                0x00000513
+#define DREG_REGID_TRAP_WRITE_12                0x00000514
+#define DREG_REGID_TRAP_WRITE_13                0x00000515
+#define DREG_REGID_TRAP_WRITE_14                0x00000516
+#define DREG_REGID_TRAP_WRITE_15                0x00000517
+#define DREG_REGID_TRAP_WRITE_16                0x00000518
+#define DREG_REGID_TRAP_WRITE_17                0x00000519
+#define DREG_REGID_TRAP_WRITE_18                0x0000051A
+#define DREG_REGID_TRAP_WRITE_19                0x0000051B
+#define DREG_REGID_TRAP_WRITE_20                0x0000051C
+#define DREG_REGID_TRAP_WRITE_21                0x0000051D
+#define DREG_REGID_TRAP_WRITE_22                0x0000051E
+#define DREG_REGID_TRAP_WRITE_23                0x0000051F
+#endif
+#endif
+#define DREG_REGID_MAC0_ACC0_LOW                0x00000600
+#define DREG_REGID_MAC0_ACC1_LOW                0x00000601
+#define DREG_REGID_MAC0_ACC2_LOW                0x00000602
+#define DREG_REGID_MAC0_ACC3_LOW                0x00000603
+#define DREG_REGID_MAC1_ACC0_LOW                0x00000604
+#define DREG_REGID_MAC1_ACC1_LOW                0x00000605
+#define DREG_REGID_MAC1_ACC2_LOW                0x00000606
+#define DREG_REGID_MAC1_ACC3_LOW                0x00000607
+#define DREG_REGID_MAC0_ACC0_MID                0x00000608
+#define DREG_REGID_MAC0_ACC1_MID                0x00000609
+#define DREG_REGID_MAC0_ACC2_MID                0x0000060A
+#define DREG_REGID_MAC0_ACC3_MID                0x0000060B
+#define DREG_REGID_MAC1_ACC0_MID                0x0000060C
+#define DREG_REGID_MAC1_ACC1_MID                0x0000060D
+#define DREG_REGID_MAC1_ACC2_MID                0x0000060E
+#define DREG_REGID_MAC1_ACC3_MID                0x0000060F
+#define DREG_REGID_MAC0_ACC0_HIGH               0x00000610
+#define DREG_REGID_MAC0_ACC1_HIGH               0x00000611
+#define DREG_REGID_MAC0_ACC2_HIGH               0x00000612
+#define DREG_REGID_MAC0_ACC3_HIGH               0x00000613
+#define DREG_REGID_MAC1_ACC0_HIGH               0x00000614
+#define DREG_REGID_MAC1_ACC1_HIGH               0x00000615
+#define DREG_REGID_MAC1_ACC2_HIGH               0x00000616
+#define DREG_REGID_MAC1_ACC3_HIGH               0x00000617
+#define DREG_REGID_RSHOUT_LOW                   0x00000620
+#define DREG_REGID_RSHOUT_MID                   0x00000628
+#define DREG_REGID_RSHOUT_HIGH                  0x00000630
+
+/*
+ *  The following defines are for the flags in the DMA stream requestor write
+ */
+#define DSRWP_DSR_MASK                          0x0000000F
+#define DSRWP_DSR_BG_RQ                         0x00000001
+#define DSRWP_DSR_PRIORITY_MASK                 0x00000006
+#define DSRWP_DSR_PRIORITY_0                    0x00000000
+#define DSRWP_DSR_PRIORITY_1                    0x00000002
+#define DSRWP_DSR_PRIORITY_2                    0x00000004
+#define DSRWP_DSR_PRIORITY_3                    0x00000006
+#define DSRWP_DSR_RQ_PENDING                    0x00000008
+
+/*
+ *  The following defines are for the flags in the trap write port register.
+ */
+#define TWPR_TW_MASK                            0x0000FFFF
+#define TWPR_TW_SHIFT                           0
+
+/*
+ *  The following defines are for the flags in the stack pointer write
+ *  register.
+ */
+#define SPWR_STKP_MASK                          0x0000000F
+#define SPWR_STKP_SHIFT                         0
+
+/*
+ *  The following defines are for the flags in the SP interrupt register.
+ */
+#define SPIR_FRI                                0x00000001
+#define SPIR_DOI                                0x00000002
+#define SPIR_GPI2                               0x00000004
+#define SPIR_GPI3                               0x00000008
+#define SPIR_IP0                                0x00000010
+#define SPIR_IP1                                0x00000020
+#define SPIR_IP2                                0x00000040
+#define SPIR_IP3                                0x00000080
+
+/*
+ *  The following defines are for the flags in the functional group 1 register.
+ */
+#define FGR1_F1S_MASK                           0x0000FFFF
+#define FGR1_F1S_SHIFT                          0
+
+/*
+ *  The following defines are for the flags in the SP clock status register.
+ */
+#define SPCS_FRI                                0x00000001
+#define SPCS_DOI                                0x00000002
+#define SPCS_GPI2                               0x00000004
+#define SPCS_GPI3                               0x00000008
+#define SPCS_IP0                                0x00000010
+#define SPCS_IP1                                0x00000020
+#define SPCS_IP2                                0x00000040
+#define SPCS_IP3                                0x00000080
+#define SPCS_SPRUN                              0x00000100
+#define SPCS_SLEEP                              0x00000200
+#define SPCS_FG                                 0x00000400
+#define SPCS_ORUN                               0x00000800
+#define SPCS_IRQ                                0x00001000
+#define SPCS_FGN_MASK                           0x0000E000
+#define SPCS_FGN_SHIFT                          13
+
+/*
+ *  The following defines are for the flags in the SP DMA requestor status
+ *  register.
+ */
+#define SDSR_DCS_MASK                           0x000000FF
+#define SDSR_DCS_SHIFT                          0
+#define SDSR_DCS_NONE                           0x00000007
+
+/*
+ *  The following defines are for the flags in the frame timer register.
+ */
+#define FRMT_FTV_MASK                           0x0000FFFF
+#define FRMT_FTV_SHIFT                          0
+
+/*
+ *  The following defines are for the flags in the frame timer current count
+ *  register.
+ */
+#define FRCC_FCC_MASK                           0x0000FFFF
+#define FRCC_FCC_SHIFT                          0
+
+/*
+ *  The following defines are for the flags in the frame timer save count
+ *  register.
+ */
+#define FRSC_FCS_MASK                           0x0000FFFF
+#define FRSC_FCS_SHIFT                          0
+
+/*
+ *  The following define the various flags stored in the scatter/gather
+ *  descriptors.
+ */
+#define DMA_SG_NEXT_ENTRY_MASK                  0x00000FF8
+#define DMA_SG_SAMPLE_END_MASK                  0x0FFF0000
+#define DMA_SG_SAMPLE_END_FLAG                  0x10000000
+#define DMA_SG_LOOP_END_FLAG                    0x20000000
+#define DMA_SG_SIGNAL_END_FLAG                  0x40000000
+#define DMA_SG_SIGNAL_PAGE_FLAG                 0x80000000
+#define DMA_SG_NEXT_ENTRY_SHIFT                 3
+#define DMA_SG_SAMPLE_END_SHIFT                 16
+
+/*
+ *  The following define the offsets of the fields within the on-chip generic
+ *  DMA requestor.
+ */
+#define DMA_RQ_CONTROL1                         0x00000000
+#define DMA_RQ_CONTROL2                         0x00000004
+#define DMA_RQ_SOURCE_ADDR                      0x00000008
+#define DMA_RQ_DESTINATION_ADDR                 0x0000000C
+#define DMA_RQ_NEXT_PAGE_ADDR                   0x00000010
+#define DMA_RQ_NEXT_PAGE_SGDESC                 0x00000014
+#define DMA_RQ_LOOP_START_ADDR                  0x00000018
+#define DMA_RQ_POST_LOOP_ADDR                   0x0000001C
+#define DMA_RQ_PAGE_MAP_ADDR                    0x00000020
+
+/*
+ *  The following defines are for the flags in the first control word of the
+ *  on-chip generic DMA requestor.
+ */
+#define DMA_RQ_C1_COUNT_MASK                    0x000003FF
+#define DMA_RQ_C1_DESTINATION_SCATTER           0x00001000
+#define DMA_RQ_C1_SOURCE_GATHER                 0x00002000
+#define DMA_RQ_C1_DONE_FLAG                     0x00004000
+#define DMA_RQ_C1_OPTIMIZE_STATE                0x00008000
+#define DMA_RQ_C1_SAMPLE_END_STATE_MASK         0x00030000
+#define DMA_RQ_C1_FULL_PAGE                     0x00000000
+#define DMA_RQ_C1_BEFORE_SAMPLE_END             0x00010000
+#define DMA_RQ_C1_PAGE_MAP_ERROR                0x00020000
+#define DMA_RQ_C1_AT_SAMPLE_END                 0x00030000
+#define DMA_RQ_C1_LOOP_END_STATE_MASK           0x000C0000
+#define DMA_RQ_C1_NOT_LOOP_END                  0x00000000
+#define DMA_RQ_C1_BEFORE_LOOP_END               0x00040000
+#define DMA_RQ_C1_2PAGE_LOOP_BEGIN              0x00080000
+#define DMA_RQ_C1_LOOP_BEGIN                    0x000C0000
+#define DMA_RQ_C1_PAGE_MAP_MASK                 0x00300000
+#define DMA_RQ_C1_PM_NONE_PENDING               0x00000000
+#define DMA_RQ_C1_PM_NEXT_PENDING               0x00100000
+#define DMA_RQ_C1_PM_RESERVED                   0x00200000
+#define DMA_RQ_C1_PM_LOOP_NEXT_PENDING          0x00300000
+#define DMA_RQ_C1_WRITEBACK_DEST_FLAG           0x00400000
+#define DMA_RQ_C1_WRITEBACK_SRC_FLAG            0x00800000
+#define DMA_RQ_C1_DEST_SIZE_MASK                0x07000000
+#define DMA_RQ_C1_DEST_LINEAR                   0x00000000
+#define DMA_RQ_C1_DEST_MOD16                    0x01000000
+#define DMA_RQ_C1_DEST_MOD32                    0x02000000
+#define DMA_RQ_C1_DEST_MOD64                    0x03000000
+#define DMA_RQ_C1_DEST_MOD128                   0x04000000
+#define DMA_RQ_C1_DEST_MOD256                   0x05000000
+#define DMA_RQ_C1_DEST_MOD512                   0x06000000
+#define DMA_RQ_C1_DEST_MOD1024                  0x07000000
+#define DMA_RQ_C1_DEST_ON_HOST                  0x08000000
+#define DMA_RQ_C1_SOURCE_SIZE_MASK              0x70000000
+#define DMA_RQ_C1_SOURCE_LINEAR                 0x00000000
+#define DMA_RQ_C1_SOURCE_MOD16                  0x10000000
+#define DMA_RQ_C1_SOURCE_MOD32                  0x20000000
+#define DMA_RQ_C1_SOURCE_MOD64                  0x30000000
+#define DMA_RQ_C1_SOURCE_MOD128                 0x40000000
+#define DMA_RQ_C1_SOURCE_MOD256                 0x50000000
+#define DMA_RQ_C1_SOURCE_MOD512                 0x60000000
+#define DMA_RQ_C1_SOURCE_MOD1024                0x70000000
+#define DMA_RQ_C1_SOURCE_ON_HOST                0x80000000
+#define DMA_RQ_C1_COUNT_SHIFT                   0
+
+/*
+ *  The following defines are for the flags in the second control word of the
+ *  on-chip generic DMA requestor.
+ */
+#define DMA_RQ_C2_VIRTUAL_CHANNEL_MASK          0x0000003F
+#define DMA_RQ_C2_VIRTUAL_SIGNAL_MASK           0x00000300
+#define DMA_RQ_C2_NO_VIRTUAL_SIGNAL             0x00000000
+#define DMA_RQ_C2_SIGNAL_EVERY_DMA              0x00000100
+#define DMA_RQ_C2_SIGNAL_SOURCE_PINGPONG        0x00000200
+#define DMA_RQ_C2_SIGNAL_DEST_PINGPONG          0x00000300
+#define DMA_RQ_C2_AUDIO_CONVERT_MASK            0x0000F000
+#define DMA_RQ_C2_AC_NONE                       0x00000000
+#define DMA_RQ_C2_AC_8_TO_16_BIT                0x00001000
+#define DMA_RQ_C2_AC_MONO_TO_STEREO             0x00002000
+#define DMA_RQ_C2_AC_ENDIAN_CONVERT             0x00004000
+#define DMA_RQ_C2_AC_SIGNED_CONVERT             0x00008000
+#define DMA_RQ_C2_LOOP_END_MASK                 0x0FFF0000
+#define DMA_RQ_C2_LOOP_MASK                     0x30000000
+#define DMA_RQ_C2_NO_LOOP                       0x00000000
+#define DMA_RQ_C2_ONE_PAGE_LOOP                 0x10000000
+#define DMA_RQ_C2_TWO_PAGE_LOOP                 0x20000000
+#define DMA_RQ_C2_MULTI_PAGE_LOOP               0x30000000
+#define DMA_RQ_C2_SIGNAL_LOOP_BACK              0x40000000
+#define DMA_RQ_C2_SIGNAL_POST_BEGIN_PAGE        0x80000000
+#define DMA_RQ_C2_VIRTUAL_CHANNEL_SHIFT         0
+#define DMA_RQ_C2_LOOP_END_SHIFT                16
+
+/*
+ *  The following defines are for the flags in the source and destination words
+ *  of the on-chip generic DMA requestor.
+ */
+#define DMA_RQ_SD_ADDRESS_MASK                  0x0000FFFF
+#define DMA_RQ_SD_MEMORY_ID_MASK                0x000F0000
+#define DMA_RQ_SD_SP_PARAM_ADDR                 0x00000000
+#define DMA_RQ_SD_SP_SAMPLE_ADDR                0x00010000
+#define DMA_RQ_SD_SP_PROGRAM_ADDR               0x00020000
+#define DMA_RQ_SD_SP_DEBUG_ADDR                 0x00030000
+#define DMA_RQ_SD_OMNIMEM_ADDR                  0x000E0000
+#define DMA_RQ_SD_END_FLAG                      0x40000000
+#define DMA_RQ_SD_ERROR_FLAG                    0x80000000
+#define DMA_RQ_SD_ADDRESS_SHIFT                 0
+
+/*
+ *  The following defines are for the flags in the page map address word of the
+ *  on-chip generic DMA requestor.
+ */
+#define DMA_RQ_PMA_LOOP_THIRD_PAGE_ENTRY_MASK   0x00000FF8
+#define DMA_RQ_PMA_PAGE_TABLE_MASK              0xFFFFF000
+#define DMA_RQ_PMA_LOOP_THIRD_PAGE_ENTRY_SHIFT  3
+#define DMA_RQ_PMA_PAGE_TABLE_SHIFT             12
+
+#define BA1_VARIDEC_BUF_1       0x000
+
+#define BA1_PDTC                0x0c0    /* BA1_PLAY_DMA_TRANSACTION_COUNT_REG */
+#define BA1_PFIE                0x0c4    /* BA1_PLAY_FORMAT_&_INTERRUPT_ENABLE_REG */
+#define BA1_PBA                 0x0c8    /* BA1_PLAY_BUFFER_ADDRESS */
+#define BA1_PVOL                0x0f8    /* BA1_PLAY_VOLUME_REG */
+#define BA1_PSRC                0x288    /* BA1_PLAY_SAMPLE_RATE_CORRECTION_REG */
+#define BA1_PCTL                0x2a4    /* BA1_PLAY_CONTROL_REG */
+#define BA1_PPI                 0x2b4    /* BA1_PLAY_PHASE_INCREMENT_REG */
+
+#define BA1_CCTL                0x064    /* BA1_CAPTURE_CONTROL_REG */
+#define BA1_CIE                 0x104    /* BA1_CAPTURE_INTERRUPT_ENABLE_REG */
+#define BA1_CBA                 0x10c    /* BA1_CAPTURE_BUFFER_ADDRESS */
+#define BA1_CSRC                0x2c8    /* BA1_CAPTURE_SAMPLE_RATE_CORRECTION_REG */
+#define BA1_CCI                 0x2d8    /* BA1_CAPTURE_COEFFICIENT_INCREMENT_REG */
+#define BA1_CD                  0x2e0    /* BA1_CAPTURE_DELAY_REG */
+#define BA1_CPI                 0x2f4    /* BA1_CAPTURE_PHASE_INCREMENT_REG */
+#define BA1_CVOL                0x2f8    /* BA1_CAPTURE_VOLUME_REG */
+
+#define BA1_CFG1                0x134    /* BA1_CAPTURE_FRAME_GROUP_1_REG */
+#define BA1_CFG2                0x138    /* BA1_CAPTURE_FRAME_GROUP_2_REG */
+#define BA1_CCST                0x13c    /* BA1_CAPTURE_CONSTANT_REG */
+#define BA1_CSPB                0x340    /* BA1_CAPTURE_SPB_ADDRESS */
+
+/*
+ *
+ */
+
+#define CS46XX_MODE_OUTPUT	(1<<0)	 /* MIDI UART - output */ 
+#define CS46XX_MODE_INPUT	(1<<1)	 /* MIDI UART - input */
+
+/*
+ *
+ */
+
+#define SAVE_REG_MAX             0x10
+#define POWER_DOWN_ALL         0x7f0f
+
+/* maxinum number of AC97 codecs connected, AC97 2.0 defined 4 */
+#define MAX_NR_AC97				            4
+#define CS46XX_PRIMARY_CODEC_INDEX          0
+#define CS46XX_SECONDARY_CODEC_INDEX		1
+#define CS46XX_SECONDARY_CODEC_OFFSET		0x80
+#define CS46XX_DSP_CAPTURE_CHANNEL          1
+
+/* capture */
+#define CS46XX_DSP_CAPTURE_CHANNEL          1
+
+/* mixer */
+#define CS46XX_MIXER_SPDIF_INPUT_ELEMENT    1
+#define CS46XX_MIXER_SPDIF_OUTPUT_ELEMENT   2
+
+
+struct snd_cs46xx_pcm {
+	struct snd_dma_buffer hw_buf;
+  
+	unsigned int ctl;
+	unsigned int shift;	/* Shift count to trasform frames in bytes */
+	struct snd_pcm_indirect pcm_rec;
+	struct snd_pcm_substream *substream;
+
+	struct dsp_pcm_channel_descriptor * pcm_channel;
+
+	int pcm_channel_id;    /* Fron Rear, Center Lfe  ... */
+};
+
+struct snd_cs46xx_region {
+	char name[24];
+	unsigned long base;
+	void __iomem *remap_addr;
+	unsigned long size;
+	struct resource *resource;
+};
+
+struct snd_cs46xx {
+	int irq;
+	unsigned long ba0_addr;
+	unsigned long ba1_addr;
+	union {
+		struct {
+			struct snd_cs46xx_region ba0;
+			struct snd_cs46xx_region data0;
+			struct snd_cs46xx_region data1;
+			struct snd_cs46xx_region pmem;
+			struct snd_cs46xx_region reg;
+		} name;
+		struct snd_cs46xx_region idx[5];
+	} region;
+
+	unsigned int mode;
+	
+	struct {
+		struct snd_dma_buffer hw_buf;
+
+		unsigned int ctl;
+		unsigned int shift;	/* Shift count to trasform frames in bytes */
+		struct snd_pcm_indirect pcm_rec;
+		struct snd_pcm_substream *substream;
+	} capt;
+
+
+	int nr_ac97_codecs;
+	struct snd_ac97_bus *ac97_bus;
+	struct snd_ac97 *ac97[MAX_NR_AC97];
+
+	struct pci_dev *pci;
+	struct snd_card *card;
+	struct snd_pcm *pcm;
+
+	struct snd_rawmidi *rmidi;
+	struct snd_rawmidi_substream *midi_input;
+	struct snd_rawmidi_substream *midi_output;
+
+	spinlock_t reg_lock;
+	unsigned int midcr;
+	unsigned int uartm;
+
+	int amplifier;
+	void (*amplifier_ctrl)(struct snd_cs46xx *, int);
+	void (*active_ctrl)(struct snd_cs46xx *, int);
+  	void (*mixer_init)(struct snd_cs46xx *);
+
+	int acpi_port;
+	struct snd_kcontrol *eapd_switch; /* for amplifier hack */
+	int accept_valid;	/* accept mmap valid (for OSS) */
+	int in_suspend;
+
+	struct gameport *gameport;
+
+#ifdef CONFIG_SND_CS46XX_NEW_DSP
+	struct mutex spos_mutex;
+
+	struct dsp_spos_instance * dsp_spos_instance;
+
+	struct snd_pcm *pcm_rear;
+	struct snd_pcm *pcm_center_lfe;
+	struct snd_pcm *pcm_iec958;
+#else /* for compatibility */
+	struct snd_cs46xx_pcm *playback_pcm;
+	unsigned int play_ctl;
+#endif
+
+#ifdef CONFIG_PM
+	u32 *saved_regs;
+#endif
+};
+
+int snd_cs46xx_create(struct snd_card *card,
+		      struct pci_dev *pci,
+		      int external_amp, int thinkpad,
+		      struct snd_cs46xx **rcodec);
+int snd_cs46xx_suspend(struct pci_dev *pci, pm_message_t state);
+int snd_cs46xx_resume(struct pci_dev *pci);
+
+int snd_cs46xx_pcm(struct snd_cs46xx *chip, int device, struct snd_pcm **rpcm);
+int snd_cs46xx_pcm_rear(struct snd_cs46xx *chip, int device, struct snd_pcm **rpcm);
+int snd_cs46xx_pcm_iec958(struct snd_cs46xx *chip, int device, struct snd_pcm **rpcm);
+int snd_cs46xx_pcm_center_lfe(struct snd_cs46xx *chip, int device, struct snd_pcm **rpcm);
+int snd_cs46xx_mixer(struct snd_cs46xx *chip, int spdif_device);
+int snd_cs46xx_midi(struct snd_cs46xx *chip, int device, struct snd_rawmidi **rmidi);
+int snd_cs46xx_start_dsp(struct snd_cs46xx *chip);
+int snd_cs46xx_gameport(struct snd_cs46xx *chip);
+
+#endif /* __SOUND_CS46XX_H */
diff --git a/include/sound/cs46xx_dsp_scb_types.h b/include/sound/cs46xx_dsp_scb_types.h
new file mode 100644
index 00000000..080857ad
--- /dev/null
+++ b/include/sound/cs46xx_dsp_scb_types.h
@@ -0,0 +1,1213 @@
+/*
+ *  The driver for the Cirrus Logic's Sound Fusion CS46XX based soundcards
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ *
+ * NOTE: comments are copy/paste from cwcemb80.lst 
+ * provided by Tom Woller at Cirrus (my only
+ * documentation about the SP OS running inside
+ * the DSP) 
+ */
+
+#ifndef __CS46XX_DSP_SCB_TYPES_H__
+#define __CS46XX_DSP_SCB_TYPES_H__
+
+#include <asm/byteorder.h>
+
+#ifndef ___DSP_DUAL_16BIT_ALLOC
+#if   defined(__LITTLE_ENDIAN)
+#define ___DSP_DUAL_16BIT_ALLOC(a,b) u16 a; u16 b;
+#elif defined(__BIG_ENDIAN)
+#define ___DSP_DUAL_16BIT_ALLOC(a,b) u16 b; u16 a;
+#else
+#error Not __LITTLE_ENDIAN and not __BIG_ENDIAN, then what ???
+#endif
+#endif
+
+/* This structs are used internally by the SP */
+
+struct dsp_basic_dma_req {
+	/* DMA Requestor Word 0 (DCW)  fields:
+
+	   31 [30-28]27  [26:24] 23 22 21 20 [19:18] [17:16] 15 14 13  12  11 10 9 8 7 6  [5:0]
+	   _______________________________________________________________________________________	
+	   |S| SBT  |D|  DBT    |wb|wb|  |  |  LS  |  SS   |Opt|Do|SSG|DSG|  |  | | | | | Dword   |
+	   |H|_____ |H|_________|S_|D |__|__|______|_______|___|ne|__ |__ |__|__|_|_|_|_|_Count -1|
+	*/
+	u32 dcw;                 /* DMA Control Word */
+	u32 dmw;                 /* DMA Mode Word */
+	u32 saw;                 /* Source Address Word */
+	u32 daw;                 /* Destination Address Word  */
+};
+
+struct dsp_scatter_gather_ext {
+	u32 npaw;                /* Next-Page Address Word */
+
+	/* DMA Requestor Word 5 (NPCW)  fields:
+     
+	   31-30 29 28          [27:16]              [15:12]             [11:3]                [2:0] 				
+	   _________________________________________________________________________________________	
+	   |SV  |LE|SE|   Sample-end byte offset   |         | Page-map entry offset for next  |    | 
+	   |page|__|__| ___________________________|_________|__page, if !sample-end___________|____|
+	*/
+	u32 npcw;                /* Next-Page Control Word */
+	u32 lbaw;                /* Loop-Begin Address Word */
+	u32 nplbaw;              /* Next-Page after Loop-Begin Address Word */
+	u32 sgaw;                /* Scatter/Gather Address Word */
+};
+
+struct dsp_volume_control {
+	___DSP_DUAL_16BIT_ALLOC(
+	   rightTarg,  /* Target volume for left & right channels */
+	   leftTarg
+	)
+	___DSP_DUAL_16BIT_ALLOC(
+	   rightVol,   /* Current left & right channel volumes */
+	   leftVol
+	)
+};
+
+/* Generic stream control block (SCB) structure definition */
+struct dsp_generic_scb {
+	/* For streaming I/O, the DSP should never alter any words in the DMA
+	   requestor or the scatter/gather extension.  Only ad hoc DMA request
+	   streams are free to alter the requestor (currently only occur in the
+	   DOS-based MIDI controller and in debugger-inserted code).
+    
+	   If an SCB does not have any associated DMA requestor, these 9 ints
+	   may be freed for use by other tasks, but the pointer to the SCB must
+	   still be such that the insOrd:nextSCB appear at offset 9 from the
+	   SCB pointer.
+     
+	   Basic (non scatter/gather) DMA requestor (4 ints)
+	*/
+  
+	/* Initialized by the host, only modified by DMA 
+	   R/O for the DSP task */
+	struct dsp_basic_dma_req  basic_req;  /* Optional */
+
+	/* Scatter/gather DMA requestor extension   (5 ints) 
+	   Initialized by the host, only modified by DMA
+	   DSP task never needs to even read these.
+	*/
+	struct dsp_scatter_gather_ext sg_ext;  /* Optional */
+
+	/* Sublist pointer & next stream control block (SCB) link.
+	   Initialized & modified by the host R/O for the DSP task
+	*/
+	___DSP_DUAL_16BIT_ALLOC(
+	    next_scb,     /* REQUIRED */
+	    sub_list_ptr  /* REQUIRED */
+	)
+  
+	/* Pointer to this tasks parameter block & stream function pointer 
+	   Initialized by the host  R/O for the DSP task */
+	___DSP_DUAL_16BIT_ALLOC(
+	    entry_point,  /* REQUIRED */
+	    this_spb      /* REQUIRED */
+	)
+
+	/* rsConfig register for stream buffer (rsDMA reg. 
+	   is loaded from basicReq.daw for incoming streams, or 
+	   basicReq.saw, for outgoing streams) 
+
+	   31 30 29  [28:24]     [23:16] 15 14 13 12 11 10 9 8 7 6  5      4      [3:0]
+	   ______________________________________________________________________________
+	   |DMA  |D|maxDMAsize| streamNum|dir|p|  |  |  |  | | |ds |shr 1|rev Cy | mod   |
+	   |prio |_|__________|__________|___|_|__|__|__|__|_|_|___|_____|_______|_______|
+	   31 30 29  [28:24]     [23:16] 15 14 13 12 11 10 9 8 7 6  5      4      [3:0]
+
+
+	   Initialized by the host R/O for the DSP task
+	*/
+	u32  strm_rs_config; /* REQUIRED */
+               // 
+	/* On mixer input streams: indicates mixer input stream configuration
+	   On Tees, this is copied from the stream being snooped
+
+	   Stream sample pointer & MAC-unit mode for this stream 
+     
+	   Initialized by the host Updated by the DSP task
+	*/
+	u32  strm_buf_ptr; /* REQUIRED  */
+
+	/* On mixer input streams: points to next mixer input and is updated by the
+                                   mixer subroutine in the "parent" DSP task
+				   (least-significant 16 bits are preserved, unused)
+    
+           On Tees, the pointer is copied from the stream being snooped on
+	   initialization, and, subsequently, it is copied into the
+	   stream being snooped.
+
+	   On wavetable/3D voices: the strmBufPtr will use all 32 bits to allow for
+                                   fractional phase accumulation
+
+	   Fractional increment per output sample in the input sample buffer
+
+	   (Not used on mixer input streams & redefined on Tees)
+	   On wavetable/3D voices: this 32-bit word specifies the integer.fractional 
+	   increment per output sample.
+	*/
+	u32  strmPhiIncr;
+
+
+	/* Standard stereo volume control
+	   Initialized by the host (host updates target volumes) 
+
+	   Current volumes update by the DSP task
+	   On mixer input streams: required & updated by the mixer subroutine in the
+                                   "parent" DSP task
+
+	   On Tees, both current & target volumes are copied up on initialization,
+	   and, subsequently, the target volume is copied up while the current
+	   volume is copied down.
+     
+	   These two 32-bit words are redefined for wavetable & 3-D voices.    
+	*/
+	struct dsp_volume_control vol_ctrl_t;   /* Optional */
+};
+
+
+struct dsp_spos_control_block {
+	/* WARNING: Certain items in this structure are modified by the host
+	            Any dword that can be modified by the host, must not be
+		    modified by the SP as the host can only do atomic dword
+		    writes, and to do otherwise, even a read modify write, 
+		    may lead to corrupted data on the SP.
+  
+		    This rule does not apply to one off boot time initialisation prior to starting the SP
+	*/
+
+
+	___DSP_DUAL_16BIT_ALLOC( 
+	/* First element on the Hyper forground task tree */
+	    hfg_tree_root_ptr,  /* HOST */			    
+	/* First 3 dwords are written by the host and read-only on the DSP */
+	    hfg_stack_base      /* HOST */
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	/* Point to this data structure to enable easy access */
+	    spos_cb_ptr,	 /* SP */
+	    prev_task_tree_ptr   /* SP && HOST */
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	/* Currently Unused */
+	    xxinterval_timer_period,
+	/* Enable extension of SPOS data structure */
+	    HFGSPB_ptr
+	)
+
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    xxnum_HFG_ticks_thisInterval,
+	/* Modified by the DSP */
+	    xxnum_tntervals
+	)
+
+
+	/* Set by DSP upon encountering a trap (breakpoint) or a spurious
+	   interrupt.  The host must clear this dword after reading it
+	   upon receiving spInt1. */
+	___DSP_DUAL_16BIT_ALLOC(
+	    spurious_int_flag,	 /* (Host & SP) Nature of the spurious interrupt */
+	    trap_flag            /* (Host & SP) Nature of detected Trap */
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    unused2,					
+	    invalid_IP_flag        /* (Host & SP ) Indicate detection of invalid instruction pointer */
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	/* pointer to forground task tree header for use in next task search */
+	    fg_task_tree_hdr_ptr,	  /* HOST */		
+	/* Data structure for controlling synchronous link update */
+	    hfg_sync_update_ptr           /* HOST */
+	)
+  
+	___DSP_DUAL_16BIT_ALLOC(
+	     begin_foreground_FCNT,  /* SP */
+	/* Place holder for holding sleep timing */
+	     last_FCNT_before_sleep  /* SP */
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    unused7,           /* SP */
+	    next_task_treePtr  /* SP */
+	)
+
+	u32 unused5;        
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    active_flags,   /* SP */
+	/* State flags, used to assist control of execution of Hyper Forground */
+	    HFG_flags       /* SP */
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    unused9,
+	    unused8
+	)
+                              
+	/* Space for saving enough context so that we can set up enough 
+	   to save some more context.
+	*/
+	u32 rFE_save_for_invalid_IP;
+	u32 r32_save_for_spurious_int;
+	u32 r32_save_for_trap;
+	u32 r32_save_for_HFG;
+};
+
+/* SPB for MIX_TO_OSTREAM algorithm family */
+struct dsp_mix2_ostream_spb
+{
+	/* 16b.16b integer.frac approximation to the
+	   number of 3 sample triplets to output each
+	   frame. (approximation must be floor, to
+	   insure that the fractional error is always
+	   positive)
+	*/
+	u32 outTripletsPerFrame;
+
+	/* 16b.16b integer.frac accumulated number of
+	   output triplets since the start of group 
+	*/
+	u32 accumOutTriplets;  
+};
+
+/* SCB for Timing master algorithm */
+struct dsp_timing_master_scb {
+	/* First 12 dwords from generic_scb_t */
+	struct dsp_basic_dma_req  basic_req;  /* Optional */
+	struct dsp_scatter_gather_ext sg_ext;  /* Optional */
+	___DSP_DUAL_16BIT_ALLOC(
+	    next_scb,     /* REQUIRED */
+	    sub_list_ptr  /* REQUIRED */
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    entry_point,  /* REQUIRED */
+	    this_spb      /* REQUIRED */
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	/* Initial values are 0000:xxxx */
+ 	    reserved,
+	    extra_sample_accum
+	)
+
+  
+	/* Initial values are xxxx:0000
+	   hi: Current CODEC output FIFO pointer
+	       (0 to 0x0f)
+           lo: Flag indicating that the CODEC
+	       FIFO is sync'd (host clears to
+	       resynchronize the FIFO pointer
+	       upon start/restart) 
+	*/
+	___DSP_DUAL_16BIT_ALLOC(
+	    codec_FIFO_syncd, 
+	    codec_FIFO_ptr
+	)
+  
+	/* Init. 8000:0005 for 44.1k
+                 8000:0001 for 48k
+	   hi: Fractional sample accumulator 0.16b
+	   lo: Number of frames remaining to be
+	       processed in the current group of
+	       frames
+	*/
+	___DSP_DUAL_16BIT_ALLOC(
+	    frac_samp_accum_qm1,
+	    TM_frms_left_in_group
+	) 
+
+	/* Init. 0001:0005 for 44.1k
+                 0000:0001 for 48k
+	   hi: Fractional sample correction factor 0.16b
+	       to be added every frameGroupLength frames
+	       to correct for truncation error in
+	       nsamp_per_frm_q15
+	   lo: Number of frames in the group
+	*/
+	___DSP_DUAL_16BIT_ALLOC(
+	    frac_samp_correction_qm1,
+	    TM_frm_group_length  
+	)
+
+	/* Init. 44.1k*65536/8k = 0x00058333 for 44.1k
+                 48k*65536/8k = 0x00060000 for 48k
+	   16b.16b integer.frac approximation to the
+	   number of samples to output each frame.
+	   (approximation must be floor, to insure */
+	u32 nsamp_per_frm_q15;
+};
+
+/* SCB for CODEC output algorithm */
+struct dsp_codec_output_scb {
+	/* First 13 dwords from generic_scb_t */
+	struct dsp_basic_dma_req  basic_req;  /* Optional */
+	struct dsp_scatter_gather_ext sg_ext;  /* Optional */
+	___DSP_DUAL_16BIT_ALLOC(
+	    next_scb,       /* REQUIRED */
+	    sub_list_ptr    /* REQUIRED */
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    entry_point,    /* REQUIRED */
+	    this_spb        /* REQUIRED */
+	)
+
+	u32 strm_rs_config; /* REQUIRED */
+
+	u32 strm_buf_ptr;   /* REQUIRED */
+
+	/* NOTE: The CODEC output task reads samples from the first task on its
+                 sublist at the stream buffer pointer (init. to lag DMA destination
+		 address word).  After the required number of samples is transferred,
+		 the CODEC output task advances sub_list_ptr->strm_buf_ptr past the samples
+		 consumed.
+	*/
+
+	/* Init. 0000:0010 for SDout
+                 0060:0010 for SDout2
+		 0080:0010 for SDout3
+	   hi: Base IO address of FIFO to which
+	       the left-channel samples are to
+	       be written.
+	   lo: Displacement for the base IO
+	       address for left-channel to obtain
+	       the base IO address for the FIFO
+	       to which the right-channel samples
+	       are to be written.
+	*/
+	___DSP_DUAL_16BIT_ALLOC(
+	    left_chan_base_IO_addr,
+	    right_chan_IO_disp
+	)
+
+
+	/* Init: 0x0080:0004 for non-AC-97
+	   Init: 0x0080:0000 for AC-97
+	   hi: Exponential volume change rate
+	       for input stream
+	   lo: Positive shift count to shift the
+	       16-bit input sample to obtain the
+	       32-bit output word
+	*/
+	___DSP_DUAL_16BIT_ALLOC(
+	    CO_scale_shift_count, 
+	    CO_exp_vol_change_rate
+	)
+
+	/* Pointer to SCB at end of input chain */
+	___DSP_DUAL_16BIT_ALLOC(
+	    reserved,
+	    last_sub_ptr
+	)
+};
+
+/* SCB for CODEC input algorithm */
+struct dsp_codec_input_scb {
+	/* First 13 dwords from generic_scb_t */
+	struct dsp_basic_dma_req  basic_req;  /* Optional */
+	struct dsp_scatter_gather_ext sg_ext;  /* Optional */
+	___DSP_DUAL_16BIT_ALLOC(
+	    next_scb,       /* REQUIRED */
+	    sub_list_ptr    /* REQUIRED */
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    entry_point,    /* REQUIRED */
+	    this_spb        /* REQUIRED */
+	)
+
+	u32 strm_rs_config; /* REQUIRED */
+	u32 strm_buf_ptr;   /* REQUIRED */
+
+	/* NOTE: The CODEC input task reads samples from the hardware FIFO 
+                 sublist at the DMA source address word (sub_list_ptr->basic_req.saw).
+                 After the required number of samples is transferred, the CODEC
+                 output task advances sub_list_ptr->basic_req.saw past the samples
+                 consumed.  SPuD must initialize the sub_list_ptr->basic_req.saw
+                 to point half-way around from the initial sub_list_ptr->strm_nuf_ptr
+                 to allow for lag/lead.
+	*/
+
+	/* Init. 0000:0010 for SDout
+                 0060:0010 for SDout2
+		 0080:0010 for SDout3
+	   hi: Base IO address of FIFO to which
+	       the left-channel samples are to
+	       be written.
+	   lo: Displacement for the base IO
+	       address for left-channel to obtain
+	       the base IO address for the FIFO
+	       to which the right-channel samples
+	       are to be written.
+	*/
+	___DSP_DUAL_16BIT_ALLOC(
+	    rightChanINdisp, 
+	    left_chan_base_IN_addr
+	)
+	/* Init. ?:fffc
+	   lo: Negative shift count to shift the
+	       32-bit input dword to obtain the
+	       16-bit sample msb-aligned (count
+	       is negative to shift left)
+	*/
+	___DSP_DUAL_16BIT_ALLOC(
+	    scaleShiftCount, 
+	    reserver1
+	)
+
+	u32  reserved2;
+};
+
+
+struct dsp_pcm_serial_input_scb {
+	/* First 13 dwords from generic_scb_t */
+	struct dsp_basic_dma_req  basic_req;  /* Optional */
+	struct dsp_scatter_gather_ext sg_ext;  /* Optional */
+	___DSP_DUAL_16BIT_ALLOC(
+	    next_scb,       /* REQUIRED */
+	    sub_list_ptr    /* REQUIRED */
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    entry_point,    /* REQUIRED */
+	    this_spb        /* REQUIRED */
+	)
+
+	u32 strm_buf_ptr;   /* REQUIRED */
+	u32 strm_rs_config; /* REQUIRED */
+  
+	/* Init. Ptr to CODEC input SCB
+	   hi: Pointer to the SCB containing the
+	       input buffer to which CODEC input
+	       samples are written
+	   lo: Flag indicating the link to the CODEC
+	       input task is to be initialized
+	*/
+	___DSP_DUAL_16BIT_ALLOC(
+	    init_codec_input_link,
+	    codec_input_buf_scb
+	)
+
+	/* Initialized by the host (host updates target volumes) */
+	struct dsp_volume_control psi_vol_ctrl;   
+  
+};
+
+struct dsp_src_task_scb {
+	___DSP_DUAL_16BIT_ALLOC(
+	    frames_left_in_gof,
+	    gofs_left_in_sec
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    const2_thirds,
+	    num_extra_tnput_samples
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    cor_per_gof,
+	    correction_per_sec 
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    output_buf_producer_ptr,  
+	    junk_DMA_MID
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    gof_length,  
+	    gofs_per_sec
+	)
+
+	u32 input_buf_strm_config;
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    reserved_for_SRC_use,
+	    input_buf_consumer_ptr
+	)
+
+	u32 accum_phi;
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    exp_src_vol_change_rate,
+	    input_buf_producer_ptr
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    src_next_scb,
+	    src_sub_list_ptr
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    src_entry_point,
+	    src_this_sbp
+	)
+
+	u32  src_strm_rs_config;
+	u32  src_strm_buf_ptr;
+  
+	u32   phiIncr6int_26frac;
+  
+	struct dsp_volume_control src_vol_ctrl;
+};
+
+struct dsp_decimate_by_pow2_scb {
+	/* decimationFactor = 2, 4, or 8 (larger factors waste too much memory
+	                                  when compared to cascading decimators)
+	*/
+	___DSP_DUAL_16BIT_ALLOC(
+	    dec2_coef_base_ptr,
+	    dec2_coef_increment
+	)
+
+	/* coefIncrement = 128 / decimationFactor (for our ROM filter)
+	   coefBasePtr = 0x8000 (for our ROM filter)
+	*/
+	___DSP_DUAL_16BIT_ALLOC(
+	    dec2_in_samples_per_out_triplet,
+	    dec2_extra_in_samples
+	)
+	/* extraInSamples: # of accumulated, unused input samples (init. to 0)
+	   inSamplesPerOutTriplet = 3 * decimationFactor
+	*/
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    dec2_const2_thirds,
+	    dec2_half_num_taps_mp5
+	)
+	/* halfNumTapsM5: (1/2 number of taps in decimation filter) minus 5
+	   const2thirds: constant 2/3 in 16Q0 format (sign.15)
+	*/
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    dec2_output_buf_producer_ptr,
+	    dec2_junkdma_mid
+	)
+
+	u32  dec2_reserved2;
+
+	u32  dec2_input_nuf_strm_config;
+	/* inputBufStrmConfig: rsConfig for the input buffer to the decimator
+	   (buffer size = decimationFactor * 32 dwords)
+	*/
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    dec2_phi_incr,
+	    dec2_input_buf_consumer_ptr
+	)
+	/* inputBufConsumerPtr: Input buffer read pointer (into SRC filter)
+	   phiIncr = decimationFactor * 4
+	*/
+
+	u32 dec2_reserved3;
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    dec2_exp_vol_change_rate,
+	    dec2_input_buf_producer_ptr
+	)
+	/* inputBufProducerPtr: Input buffer write pointer
+	   expVolChangeRate: Exponential volume change rate for possible
+	                     future mixer on input streams
+	*/
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    dec2_next_scb,
+	    dec2_sub_list_ptr
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    dec2_entry_point,
+	    dec2_this_spb
+	)
+
+	u32  dec2_strm_rs_config;
+	u32  dec2_strm_buf_ptr;
+
+	u32  dec2_reserved4;
+
+	struct dsp_volume_control dec2_vol_ctrl; /* Not used! */
+};
+
+struct dsp_vari_decimate_scb {
+	___DSP_DUAL_16BIT_ALLOC(
+	    vdec_frames_left_in_gof,
+	    vdec_gofs_left_in_sec
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    vdec_const2_thirds,
+	    vdec_extra_in_samples
+	)
+	/* extraInSamples: # of accumulated, unused input samples (init. to 0)
+	   const2thirds: constant 2/3 in 16Q0 format (sign.15) */
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    vdec_cor_per_gof,
+	    vdec_correction_per_sec
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    vdec_output_buf_producer_ptr,
+	    vdec_input_buf_consumer_ptr
+	)
+	/* inputBufConsumerPtr: Input buffer read pointer (into SRC filter) */
+	___DSP_DUAL_16BIT_ALLOC(
+	    vdec_gof_length,
+	    vdec_gofs_per_sec
+	)
+
+	u32  vdec_input_buf_strm_config;
+	/* inputBufStrmConfig: rsConfig for the input buffer to the decimator
+	   (buffer size = 64 dwords) */
+	u32  vdec_coef_increment;
+	/* coefIncrement = - 128.0 / decimationFactor (as a 32Q15 number) */
+
+	u32  vdec_accumphi;
+	/* accumPhi: accumulated fractional phase increment (6.26) */
+
+	___DSP_DUAL_16BIT_ALLOC(
+ 	    vdec_exp_vol_change_rate,
+	    vdec_input_buf_producer_ptr
+	)
+	/* inputBufProducerPtr: Input buffer write pointer
+	   expVolChangeRate: Exponential volume change rate for possible
+	   future mixer on input streams */
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    vdec_next_scb,
+	    vdec_sub_list_ptr
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    vdec_entry_point,
+	    vdec_this_spb
+	)
+
+	u32 vdec_strm_rs_config;
+	u32 vdec_strm_buf_ptr;
+
+	u32 vdec_phi_incr_6int_26frac;
+
+	struct dsp_volume_control vdec_vol_ctrl;
+};
+
+
+/* SCB for MIX_TO_OSTREAM algorithm family */
+struct dsp_mix2_ostream_scb {
+	/* First 13 dwords from generic_scb_t */
+	struct dsp_basic_dma_req  basic_req;  /* Optional */
+	struct dsp_scatter_gather_ext sg_ext;  /* Optional */
+	___DSP_DUAL_16BIT_ALLOC(
+	    next_scb,       /* REQUIRED */
+	    sub_list_ptr    /* REQUIRED */
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    entry_point,    /* REQUIRED */
+	    this_spb        /* REQUIRED */
+	)
+
+	u32 strm_rs_config; /* REQUIRED */
+	u32 strm_buf_ptr;   /* REQUIRED */
+
+
+	/* hi: Number of mixed-down input triplets
+	       computed since start of group
+	   lo: Number of frames remaining to be
+	       processed in the current group of
+	       frames
+	*/
+	___DSP_DUAL_16BIT_ALLOC(
+	    frames_left_in_group,
+	    accum_input_triplets
+	)
+
+	/* hi: Exponential volume change rate
+	       for mixer on input streams
+	   lo: Number of frames in the group
+	*/
+	___DSP_DUAL_16BIT_ALLOC(
+	    frame_group_length,
+	    exp_vol_change_rate
+	)
+  
+	___DSP_DUAL_16BIT_ALLOC(
+	    const_FFFF,
+	    const_zero
+	)
+};
+
+
+/* SCB for S16_MIX algorithm */
+struct dsp_mix_only_scb {
+	/* First 13 dwords from generic_scb_t */
+	struct dsp_basic_dma_req  basic_req;  /* Optional */
+	struct dsp_scatter_gather_ext sg_ext;  /* Optional */
+	___DSP_DUAL_16BIT_ALLOC(
+	    next_scb,       /* REQUIRED */
+	    sub_list_ptr    /* REQUIRED */
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    entry_point,    /* REQUIRED */
+	    this_spb        /* REQUIRED */
+	)
+
+	u32 strm_rs_config; /* REQUIRED */
+	u32 strm_buf_ptr;   /* REQUIRED */
+
+	u32 reserved;
+	struct dsp_volume_control vol_ctrl;
+};
+
+/* SCB for the async. CODEC input algorithm */
+struct dsp_async_codec_input_scb {
+	u32 io_free2;     
+  
+	u32 io_current_total;
+	u32 io_previous_total;
+  
+	u16 io_count;
+	u16 io_count_limit;
+  
+	u16 o_fifo_base_addr;            
+	u16 ost_mo_format;
+	/* 1 = stereo; 0 = mono 
+	   xxx for ASER 1 (not allowed); 118 for ASER2 */
+
+	u32  ostrm_rs_config;
+	u32  ostrm_buf_ptr;
+  
+	___DSP_DUAL_16BIT_ALLOC(
+	    io_sclks_per_lr_clk,
+	    io_io_enable
+	)
+
+	u32  io_free4;
+
+	___DSP_DUAL_16BIT_ALLOC(  
+	    io_next_scb,
+	    io_sub_list_ptr
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    io_entry_point,
+	    io_this_spb
+	)
+
+	u32 istrm_rs_config;
+	u32 istrm_buf_ptr;
+
+	/* Init. 0000:8042: for ASER1
+                 0000:8044: for ASER2  */
+	___DSP_DUAL_16BIT_ALLOC(
+	    io_stat_reg_addr,
+	    iofifo_pointer
+	)
+
+	/* Init 1 stero:100 ASER1
+	   Init 0 mono:110 ASER2 
+	*/
+	___DSP_DUAL_16BIT_ALLOC(
+	    ififo_base_addr,            
+	    ist_mo_format
+	)
+
+	u32 i_free;
+};
+
+
+/* SCB for the SP/DIF CODEC input and output */
+struct dsp_spdifiscb {
+	___DSP_DUAL_16BIT_ALLOC(
+	    status_ptr,     
+	    status_start_ptr
+	)
+
+	u32 current_total;
+	u32 previous_total;
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    count,
+	    count_limit
+	)
+
+	u32 status_data;
+
+	___DSP_DUAL_16BIT_ALLOC(  
+	    status,
+	    free4
+	)
+
+	u32 free3;
+
+	___DSP_DUAL_16BIT_ALLOC(  
+	    free2,
+	    bit_count
+	)
+
+	u32  temp_status;
+  
+	___DSP_DUAL_16BIT_ALLOC(
+	    next_SCB,
+	    sub_list_ptr
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    entry_point,
+	    this_spb
+	)
+
+	u32  strm_rs_config;
+	u32  strm_buf_ptr;
+  
+	___DSP_DUAL_16BIT_ALLOC(
+	    stat_reg_addr, 
+	    fifo_pointer
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    fifo_base_addr, 
+	    st_mo_format
+	)
+
+	u32  free1;
+};
+
+
+/* SCB for the SP/DIF CODEC input and output  */
+struct dsp_spdifoscb {		 
+
+	u32 free2;     
+
+	u32 free3[4];             
+
+	/* Need to be here for compatibility with AsynchFGTxCode */
+	u32 strm_rs_config;
+                               
+	u32 strm_buf_ptr;
+
+	___DSP_DUAL_16BIT_ALLOC(  
+	    status,
+	    free5
+	)
+
+	u32 free4;
+
+	___DSP_DUAL_16BIT_ALLOC(  
+	    next_scb,
+	    sub_list_ptr
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    entry_point,
+	    this_spb
+	)
+
+	u32 free6[2];
+  
+	___DSP_DUAL_16BIT_ALLOC(
+	    stat_reg_addr, 
+	    fifo_pointer
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    fifo_base_addr,
+	    st_mo_format
+	)
+
+	u32  free1;                                         
+};
+
+
+struct dsp_asynch_fg_rx_scb {
+	___DSP_DUAL_16BIT_ALLOC(
+	    bot_buf_mask,
+	    buf_Mask
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    max,
+	    min
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    old_producer_pointer,
+	    hfg_scb_ptr
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    delta,
+	    adjust_count
+	)
+
+	u32 unused2[5];  
+
+	___DSP_DUAL_16BIT_ALLOC(  
+	    sibling_ptr,  
+	    child_ptr
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    code_ptr,
+	    this_ptr
+	)
+
+	u32 strm_rs_config; 
+
+	u32 strm_buf_ptr;
+  
+	u32 unused_phi_incr;
+  
+	___DSP_DUAL_16BIT_ALLOC(
+	    right_targ,   
+	    left_targ
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    right_vol,
+	    left_vol
+	)
+};
+
+
+struct dsp_asynch_fg_tx_scb {
+	___DSP_DUAL_16BIT_ALLOC(
+	    not_buf_mask,
+	    buf_mask
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    max,
+	    min
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    unused1,
+	    hfg_scb_ptr
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    delta,
+	    adjust_count
+	)
+
+	u32 accum_phi;
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    unused2,
+	    const_one_third
+	)
+
+	u32 unused3[3];
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    sibling_ptr,
+	    child_ptr
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    codePtr,
+	    this_ptr
+	)
+
+	u32 strm_rs_config;
+
+	u32 strm_buf_ptr;
+
+	u32 phi_incr;
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    unused_right_targ,
+	    unused_left_targ
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    unused_right_vol,
+	    unused_left_vol
+	)
+};
+
+
+struct dsp_output_snoop_scb {
+	/* First 13 dwords from generic_scb_t */
+	struct dsp_basic_dma_req  basic_req;  /* Optional */
+	struct dsp_scatter_gather_ext sg_ext;  /* Optional */
+	___DSP_DUAL_16BIT_ALLOC(
+	    next_scb,       /* REQUIRED */
+	    sub_list_ptr    /* REQUIRED */
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    entry_point,    /* REQUIRED */
+	    this_spb        /* REQUIRED */
+	)
+
+	u32 strm_rs_config; /* REQUIRED */
+	u32 strm_buf_ptr;   /* REQUIRED */
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    init_snoop_input_link,
+	    snoop_child_input_scb
+	)
+
+	u32 snoop_input_buf_ptr;
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    reserved,
+	    input_scb
+	)
+};
+
+struct dsp_spio_write_scb {
+	___DSP_DUAL_16BIT_ALLOC(
+	    address1,
+	    address2
+	)
+
+	u32 data1;
+
+	u32 data2;
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    address3,
+	    address4
+	)
+
+	u32 data3;
+
+	u32 data4;
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    unused1,
+	    data_ptr
+	)
+
+	u32 unused2[2];
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    sibling_ptr,
+	    child_ptr
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    entry_point,
+	    this_ptr
+	)
+
+	u32 unused3[5];
+};
+
+struct dsp_magic_snoop_task {
+	u32 i0;
+	u32 i1;
+
+	u32 strm_buf_ptr1;
+  
+	u16 i2;
+	u16 snoop_scb;
+
+	u32 i3;
+	u32 i4;
+	u32 i5;
+	u32 i6;
+
+	u32 i7;
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    next_scb,
+	    sub_list_ptr
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    entry_point,
+	    this_ptr
+	)
+
+	u32 strm_buf_config;
+	u32 strm_buf_ptr2;
+
+	u32 i8;
+
+	struct dsp_volume_control vdec_vol_ctrl;
+};
+
+
+struct dsp_filter_scb {
+	___DSP_DUAL_16BIT_ALLOC(
+	      a0_right,          /* 0x00 */
+	      a0_left
+	)
+	___DSP_DUAL_16BIT_ALLOC(
+	      a1_right,          /* 0x01 */
+	      a1_left
+	)
+	___DSP_DUAL_16BIT_ALLOC(
+	      a2_right,          /* 0x02 */
+	      a2_left
+	)
+	___DSP_DUAL_16BIT_ALLOC(
+	      output_buf_ptr,    /* 0x03 */
+	      init
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	      filter_unused3,    /* 0x04 */
+	      filter_unused2
+	)
+
+	u32 prev_sample_output1; /* 0x05 */
+	u32 prev_sample_output2; /* 0x06 */
+	u32 prev_sample_input1;  /* 0x07 */
+	u32 prev_sample_input2;  /* 0x08 */
+
+	___DSP_DUAL_16BIT_ALLOC(
+	      next_scb_ptr,      /* 0x09 */
+	      sub_list_ptr
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	      entry_point,       /* 0x0A */
+	      spb_ptr
+	)
+
+	u32  strm_rs_config;     /* 0x0B */
+	u32  strm_buf_ptr;       /* 0x0C */
+
+	___DSP_DUAL_16BIT_ALLOC(
+              b0_right,          /* 0x0D */
+	      b0_left
+	)
+	___DSP_DUAL_16BIT_ALLOC(
+              b1_right,          /* 0x0E */
+	      b1_left
+	)
+	___DSP_DUAL_16BIT_ALLOC(
+              b2_right,          /* 0x0F */
+	      b2_left
+	)
+};
+#endif /* __DSP_SCB_TYPES_H__ */
diff --git a/include/sound/cs46xx_dsp_spos.h b/include/sound/cs46xx_dsp_spos.h
new file mode 100644
index 00000000..8008c592
--- /dev/null
+++ b/include/sound/cs46xx_dsp_spos.h
@@ -0,0 +1,234 @@
+/*
+ *  The driver for the Cirrus Logic's Sound Fusion CS46XX based soundcards
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#ifndef __CS46XX_DSP_SPOS_H__
+#define __CS46XX_DSP_SPOS_H__
+
+#include "cs46xx_dsp_scb_types.h"
+#include "cs46xx_dsp_task_types.h"
+
+#define SYMBOL_CONSTANT  0x0
+#define SYMBOL_SAMPLE    0x1
+#define SYMBOL_PARAMETER 0x2
+#define SYMBOL_CODE      0x3
+
+#define SEGTYPE_SP_PROGRAM              0x00000001
+#define SEGTYPE_SP_PARAMETER            0x00000002
+#define SEGTYPE_SP_SAMPLE               0x00000003
+#define SEGTYPE_SP_COEFFICIENT          0x00000004
+
+#define DSP_SPOS_UU      0x0deadul     /* unused */
+#define DSP_SPOS_DC      0x0badul      /* don't care */
+#define DSP_SPOS_DC_DC   0x0bad0badul  /* don't care */
+#define DSP_SPOS_UUUU    0xdeadc0edul  /* unused */
+#define DSP_SPOS_UUHI    0xdeadul
+#define DSP_SPOS_UULO    0xc0edul
+#define DSP_SPOS_DCDC    0x0badf1d0ul  /* don't care */
+#define DSP_SPOS_DCDCHI  0x0badul
+#define DSP_SPOS_DCDCLO  0xf1d0ul
+
+#define DSP_MAX_TASK_NAME   60
+#define DSP_MAX_SYMBOL_NAME 100
+#define DSP_MAX_SCB_NAME    60
+#define DSP_MAX_SCB_DESC    200
+#define DSP_MAX_TASK_DESC   50
+
+#define DSP_MAX_PCM_CHANNELS 32
+#define DSP_MAX_SRC_NR       14
+
+#define DSP_PCM_MAIN_CHANNEL        1
+#define DSP_PCM_REAR_CHANNEL        2
+#define DSP_PCM_CENTER_LFE_CHANNEL  3
+#define DSP_PCM_S71_CHANNEL         4 /* surround 7.1 */
+#define DSP_IEC958_CHANNEL          5
+
+#define DSP_SPDIF_STATUS_OUTPUT_ENABLED       1
+#define DSP_SPDIF_STATUS_PLAYBACK_OPEN        2
+#define DSP_SPDIF_STATUS_HW_ENABLED           4
+#define DSP_SPDIF_STATUS_INPUT_CTRL_ENABLED   8
+
+struct dsp_symbol_entry {
+	u32 address;
+	char symbol_name[DSP_MAX_SYMBOL_NAME];
+	int symbol_type;
+
+	/* initialized by driver */
+	struct dsp_module_desc * module;
+	int deleted;
+};
+
+struct dsp_symbol_desc {
+	int nsymbols;
+
+	struct dsp_symbol_entry *symbols;
+
+	/* initialized by driver */
+	int highest_frag_index;
+};
+
+struct dsp_segment_desc {
+	int segment_type;
+	u32 offset;
+	u32 size;
+	u32 * data;
+};
+
+struct dsp_module_desc {
+	char * module_name;
+	struct dsp_symbol_desc symbol_table;
+	int nsegments;
+	struct dsp_segment_desc * segments;
+
+	/* initialized by driver */
+	u32 overlay_begin_address;
+	u32 load_address;
+	int nfixups;
+};
+
+struct dsp_scb_descriptor {
+	char scb_name[DSP_MAX_SCB_NAME];
+	u32 address;
+	int index;
+	u32 *data;
+
+	struct dsp_scb_descriptor * sub_list_ptr;
+	struct dsp_scb_descriptor * next_scb_ptr;
+	struct dsp_scb_descriptor * parent_scb_ptr;
+
+	struct dsp_symbol_entry * task_entry;
+	struct dsp_symbol_entry * scb_symbol;
+
+	struct snd_info_entry *proc_info;
+	int ref_count;
+
+	u16 volume[2];
+	unsigned int deleted :1;
+	unsigned int updated :1;
+	unsigned int volume_set :1;
+};
+
+struct dsp_task_descriptor {
+	char task_name[DSP_MAX_TASK_NAME];
+	int size;
+	u32 address;
+	int index;
+	u32 *data;
+};
+
+struct dsp_pcm_channel_descriptor {
+	int active;
+	int src_slot;
+	int pcm_slot;
+	u32 sample_rate;
+	u32 unlinked;
+	struct dsp_scb_descriptor * pcm_reader_scb;
+	struct dsp_scb_descriptor * src_scb;
+	struct dsp_scb_descriptor * mixer_scb;
+
+	void * private_data;
+};
+
+struct dsp_spos_instance {
+	struct dsp_symbol_desc symbol_table; /* currently available loaded symbols in SP */
+
+	int nmodules;
+	struct dsp_module_desc * modules; /* modules loaded into SP */
+
+	struct dsp_segment_desc code;
+
+	/* Main PCM playback mixer */
+	struct dsp_scb_descriptor * master_mix_scb;
+	u16 dac_volume_right;
+	u16 dac_volume_left;
+
+	/* Rear/surround PCM playback mixer */
+	struct dsp_scb_descriptor * rear_mix_scb;
+
+	/* Center/LFE mixer */
+	struct dsp_scb_descriptor * center_lfe_mix_scb;
+
+	int npcm_channels;
+	int nsrc_scb;
+	struct dsp_pcm_channel_descriptor pcm_channels[DSP_MAX_PCM_CHANNELS];
+	int src_scb_slots[DSP_MAX_SRC_NR];
+
+	/* cache this symbols */
+	struct dsp_symbol_entry * null_algorithm; /* used by PCMreaderSCB's */
+	struct dsp_symbol_entry * s16_up;         /* used by SRCtaskSCB's */
+
+	/* proc fs */  
+	struct snd_card *snd_card;
+	struct snd_info_entry * proc_dsp_dir;
+	struct snd_info_entry * proc_sym_info_entry;
+	struct snd_info_entry * proc_modules_info_entry;
+	struct snd_info_entry * proc_parameter_dump_info_entry;
+	struct snd_info_entry * proc_sample_dump_info_entry;
+
+	/* SCB's descriptors */
+	int nscb;
+	int scb_highest_frag_index;
+	struct dsp_scb_descriptor scbs[DSP_MAX_SCB_DESC];
+	struct snd_info_entry * proc_scb_info_entry;
+	struct dsp_scb_descriptor * the_null_scb;
+
+	/* Task's descriptors */
+	int ntask;
+	struct dsp_task_descriptor tasks[DSP_MAX_TASK_DESC];
+	struct snd_info_entry * proc_task_info_entry;
+
+	/* SPDIF status */
+	int spdif_status_out;
+	int spdif_status_in;
+	u16 spdif_input_volume_right;
+	u16 spdif_input_volume_left;
+	/* spdif channel status,
+	   left right and user validity bits */
+	unsigned int spdif_csuv_default;
+	unsigned int spdif_csuv_stream;
+
+	/* SPDIF input sample rate converter */
+	struct dsp_scb_descriptor * spdif_in_src;
+	/* SPDIF input asynch. receiver */
+	struct dsp_scb_descriptor * asynch_rx_scb;
+
+	/* Capture record mixer SCB */
+	struct dsp_scb_descriptor * record_mixer_scb;
+    
+	/* CODEC input SCB */
+	struct dsp_scb_descriptor * codec_in_scb;
+
+	/* reference snooper */
+	struct dsp_scb_descriptor * ref_snoop_scb;
+
+	/* SPDIF output  PCM reference  */
+	struct dsp_scb_descriptor * spdif_pcm_input_scb;
+
+	/* asynch TX task */
+	struct dsp_scb_descriptor * asynch_tx_scb;
+
+	/* record sources */
+	struct dsp_scb_descriptor * pcm_input;
+	struct dsp_scb_descriptor * adc_input;
+
+	int spdif_in_sample_rate;
+};
+
+#endif /* __DSP_SPOS_H__ */
diff --git a/include/sound/cs46xx_dsp_task_types.h b/include/sound/cs46xx_dsp_task_types.h
new file mode 100644
index 00000000..5cf920bf
--- /dev/null
+++ b/include/sound/cs46xx_dsp_task_types.h
@@ -0,0 +1,252 @@
+/*
+ *  The driver for the Cirrus Logic's Sound Fusion CS46XX based soundcards
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ *
+ * NOTE: comments are copy/paste from cwcemb80.lst 
+ * provided by Tom Woller at Cirrus (my only
+ * documentation about the SP OS running inside
+ * the DSP) 
+ */
+
+#ifndef __CS46XX_DSP_TASK_TYPES_H__
+#define __CS46XX_DSP_TASK_TYPES_H__
+
+#include "cs46xx_dsp_scb_types.h"
+
+/*********************************************************************************************
+Example hierarchy of stream control blocks in the SP
+
+hfgTree
+Ptr____Call (c)
+       \
+ -------+------         -------------      -------------      -------------      -----
+| SBlaster IF  |______\| Foreground  |___\| Middlegr'nd |___\| Background  |___\| Nul |
+|              |Goto  /| tree header |g  /| tree header |g  /| tree header |g  /| SCB |r
+ -------------- (g)     -------------      -------------      -------------      -----
+       |c                     |c                 |c                 |c
+       |                      |                  |                  |
+      \/                  -------------      -------------      -------------   
+                       | Foreground  |_\  | Middlegr'nd |_\  | Background  |_\
+                       |     tree    |g/  |    tree     |g/  |     tree    |g/
+                        -------------      -------------      -------------   
+                              |c                 |c                 |c
+                              |                  |                  | 
+                             \/                 \/                 \/ 
+
+*********************************************************************************************/
+
+#define		HFG_FIRST_EXECUTE_MODE			0x0001
+#define		HFG_FIRST_EXECUTE_MODE_BIT		0
+#define		HFG_CONTEXT_SWITCH_MODE			0x0002
+#define		HFG_CONTEXT_SWITCH_MODE_BIT		1
+
+#define MAX_FG_STACK_SIZE 	32			/* THESE NEED TO BE COMPUTED PROPERLY */
+#define MAX_MG_STACK_SIZE 	16
+#define MAX_BG_STACK_SIZE 	9
+#define MAX_HFG_STACK_SIZE	4
+
+#define SLEEP_ACTIVE_INCREMENT		0		/* Enable task tree thread to go to sleep
+											   This should only ever be used on the Background thread */
+#define STANDARD_ACTIVE_INCREMENT	1		/* Task tree thread normal operation */
+#define SUSPEND_ACTIVE_INCREMENT	2		/* Cause execution to suspend in the task tree thread
+                                               This should only ever be used on the Background thread */
+
+#define HOSTFLAGS_DISABLE_BG_SLEEP  0       /* Host-controlled flag that determines whether we go to sleep
+                                               at the end of BG */
+
+/* Minimal context save area for Hyper Forground */
+struct dsp_hf_save_area {
+	u32	r10_save;
+	u32	r54_save;
+	u32	r98_save;
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    status_save,
+	    ind_save
+	)
+
+	___DSP_DUAL_16BIT_ALLOC(
+	    rci1_save,
+	    rci0_save
+	)
+
+	u32	r32_save;
+	u32	r76_save;
+	u32	rsd2_save;
+
+       	___DSP_DUAL_16BIT_ALLOC(
+	      rsi2_save,	  /* See TaskTreeParameterBlock for 
+				     remainder of registers  */
+	      rsa2Save
+	)
+	/* saved as part of HFG context  */
+};
+
+
+/* Task link data structure */
+struct dsp_tree_link {
+	___DSP_DUAL_16BIT_ALLOC(
+	/* Pointer to sibling task control block */
+	    next_scb,
+	/* Pointer to child task control block */
+	    sub_ptr
+	)
+  
+	___DSP_DUAL_16BIT_ALLOC(
+	/* Pointer to code entry point */
+	    entry_point, 
+	/* Pointer to local data */
+	    this_spb
+	)
+};
+
+
+struct dsp_task_tree_data {
+	___DSP_DUAL_16BIT_ALLOC(
+	/* Initial tock count; controls task tree execution rate */
+	    tock_count_limit,
+	/* Tock down counter */
+	    tock_count
+	)
+
+	/* Add to ActiveCount when TockCountLimit reached: 
+	   Subtract on task tree termination */
+	___DSP_DUAL_16BIT_ALLOC(
+	    active_tncrement,		
+	/* Number of pending activations for task tree */
+	    active_count
+	)
+
+        ___DSP_DUAL_16BIT_ALLOC(
+	/* BitNumber to enable modification of correct bit in ActiveTaskFlags */
+	    active_bit,	    
+	/* Pointer to OS location for indicating current activity on task level */
+	    active_task_flags_ptr
+	)
+
+	/* Data structure for controlling movement of memory blocks:- 
+	   currently unused */
+	___DSP_DUAL_16BIT_ALLOC(
+	    mem_upd_ptr,
+	/* Data structure for controlling synchronous link update */
+	    link_upd_ptr
+	)
+  
+	___DSP_DUAL_16BIT_ALLOC(
+	/* Save area for remainder of full context. */
+	    save_area,
+	/* Address of start of local stack for data storage */
+	    data_stack_base_ptr
+	)
+
+};
+
+
+struct dsp_interval_timer_data
+{
+	/* These data items have the same relative locations to those */
+	___DSP_DUAL_16BIT_ALLOC(
+	     interval_timer_period,
+	     itd_unused
+	)
+
+	/* used for this data in the SPOS control block for SPOS 1.0 */
+	___DSP_DUAL_16BIT_ALLOC(
+	     num_FG_ticks_this_interval,        
+	     num_intervals
+	)
+};
+
+
+/* This structure contains extra storage for the task tree
+   Currently, this additional data is related only to a full context save */
+struct dsp_task_tree_context_block {
+	/* Up to 10 values are saved onto the stack.  8 for the task tree, 1 for
+	   The access to the context switch (call or interrupt), and 1 spare that
+	   users should never use.  This last may be required by the system */
+	___DSP_DUAL_16BIT_ALLOC(
+	     stack1,
+	     stack0
+	)
+	___DSP_DUAL_16BIT_ALLOC(
+	     stack3,
+	     stack2
+	)
+	___DSP_DUAL_16BIT_ALLOC(
+	     stack5,
+	     stack4
+	)
+	___DSP_DUAL_16BIT_ALLOC(
+	     stack7,
+	     stack6
+	)
+	___DSP_DUAL_16BIT_ALLOC(
+	     stack9,
+	     stack8
+	)
+
+	u32	  saverfe;					
+
+	/* Value may be overwriten by stack save algorithm.
+	   Retain the size of the stack data saved here if used */
+	___DSP_DUAL_16BIT_ALLOC(
+             reserved1,	
+  	     stack_size
+	)
+	u32		saverba;	  /* (HFG) */
+	u32		saverdc;
+	u32		savers_config_23; /* (HFG) */
+	u32		savers_DMA23;	  /* (HFG) */
+	u32		saversa0;
+	u32		saversi0;
+	u32		saversa1;
+	u32		saversi1;
+	u32		saversa3;
+	u32		saversd0;
+	u32		saversd1;
+	u32		saversd3;
+	u32		savers_config01;
+	u32		savers_DMA01;
+	u32		saveacc0hl;
+	u32		saveacc1hl;
+	u32		saveacc0xacc1x;
+	u32		saveacc2hl;
+	u32		saveacc3hl;
+	u32		saveacc2xacc3x;
+	u32		saveaux0hl;
+	u32		saveaux1hl;
+	u32		saveaux0xaux1x;
+	u32		saveaux2hl;
+	u32		saveaux3hl;
+	u32		saveaux2xaux3x;
+	u32		savershouthl;
+	u32		savershoutxmacmode;
+};
+                
+
+struct dsp_task_tree_control_block {
+	struct dsp_hf_save_area			context;
+	struct dsp_tree_link			links;
+	struct dsp_task_tree_data		data;
+	struct dsp_task_tree_context_block	context_blk;
+	struct dsp_interval_timer_data		int_timer;
+};
+
+
+#endif /* __DSP_TASK_TYPES_H__ */
diff --git a/include/sound/cs8403.h b/include/sound/cs8403.h
new file mode 100644
index 00000000..3a8c174a
--- /dev/null
+++ b/include/sound/cs8403.h
@@ -0,0 +1,257 @@
+#ifndef __SOUND_CS8403_H
+#define __SOUND_CS8403_H
+
+/*
+ *  Routines for Cirrus Logic CS8403/CS8404A IEC958 (S/PDIF) Transmitter
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>,
+ *		     Takashi Iwai <tiwai@suse.de>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#ifdef SND_CS8403
+
+#ifndef SND_CS8403_DECL
+#define SND_CS8403_DECL static
+#endif
+#ifndef SND_CS8403_DECODE
+#define SND_CS8403_DECODE snd_cs8403_decode_spdif_bits
+#endif
+#ifndef SND_CS8403_ENCODE
+#define SND_CS8403_ENCODE snd_cs8403_encode_spdif_bits
+#endif
+
+
+SND_CS8403_DECL void SND_CS8403_DECODE(struct snd_aes_iec958 *diga, unsigned char bits)
+{
+	if (bits & 0x01) {	/* consumer */
+		if (!(bits & 0x02))
+			diga->status[0] |= IEC958_AES0_NONAUDIO;
+		if (!(bits & 0x08))
+			diga->status[0] |= IEC958_AES0_CON_NOT_COPYRIGHT;
+		switch (bits & 0x10) {
+		case 0x10: diga->status[0] |= IEC958_AES0_CON_EMPHASIS_NONE; break;
+		case 0x00: diga->status[0] |= IEC958_AES0_CON_EMPHASIS_5015; break;
+		}
+		if (!(bits & 0x80))
+			diga->status[1] |= IEC958_AES1_CON_ORIGINAL;
+		switch (bits & 0x60) {
+		case 0x00: diga->status[1] |= IEC958_AES1_CON_MAGNETIC_ID; break;
+		case 0x20: diga->status[1] |= IEC958_AES1_CON_DIGDIGCONV_ID; break;
+		case 0x40: diga->status[1] |= IEC958_AES1_CON_LASEROPT_ID; break;
+		case 0x60: diga->status[1] |= IEC958_AES1_CON_GENERAL; break;
+		}
+		switch (bits & 0x06) {
+		case 0x00: diga->status[3] |= IEC958_AES3_CON_FS_44100; break;
+		case 0x02: diga->status[3] |= IEC958_AES3_CON_FS_48000; break;
+		case 0x04: diga->status[3] |= IEC958_AES3_CON_FS_32000; break;
+		}
+	} else {
+		diga->status[0] = IEC958_AES0_PROFESSIONAL;
+		switch (bits & 0x18) {
+		case 0x00: diga->status[0] |= IEC958_AES0_PRO_FS_32000; break;
+		case 0x10: diga->status[0] |= IEC958_AES0_PRO_FS_44100; break;
+		case 0x08: diga->status[0] |= IEC958_AES0_PRO_FS_48000; break;
+		case 0x18: diga->status[0] |= IEC958_AES0_PRO_FS_NOTID; break;
+		}
+		switch (bits & 0x60) {
+		case 0x20: diga->status[0] |= IEC958_AES0_PRO_EMPHASIS_NONE; break;
+		case 0x40: diga->status[0] |= IEC958_AES0_PRO_EMPHASIS_5015; break;
+		case 0x00: diga->status[0] |= IEC958_AES0_PRO_EMPHASIS_CCITT; break;
+		case 0x60: diga->status[0] |= IEC958_AES0_PRO_EMPHASIS_NOTID; break;
+		}
+		if (bits & 0x80)
+			diga->status[1] |= IEC958_AES1_PRO_MODE_STEREOPHONIC;
+	}
+}
+
+SND_CS8403_DECL unsigned char SND_CS8403_ENCODE(struct snd_aes_iec958 *diga)
+{
+	unsigned char bits;
+
+	if (!(diga->status[0] & IEC958_AES0_PROFESSIONAL)) {
+		bits = 0x01;	/* consumer mode */
+		if (diga->status[0] & IEC958_AES0_NONAUDIO)
+			bits &= ~0x02;
+		else
+			bits |= 0x02;
+		if (diga->status[0] & IEC958_AES0_CON_NOT_COPYRIGHT)
+			bits &= ~0x08;
+		else
+			bits |= 0x08;
+		switch (diga->status[0] & IEC958_AES0_CON_EMPHASIS) {
+		default:
+		case IEC958_AES0_CON_EMPHASIS_NONE: bits |= 0x10; break;
+		case IEC958_AES0_CON_EMPHASIS_5015: bits |= 0x00; break;
+		}
+		if (diga->status[1] & IEC958_AES1_CON_ORIGINAL)
+			bits &= ~0x80;
+		else
+			bits |= 0x80;
+		if ((diga->status[1] & IEC958_AES1_CON_CATEGORY) == IEC958_AES1_CON_GENERAL)
+			bits |= 0x60;
+		else {
+			switch(diga->status[1] & IEC958_AES1_CON_MAGNETIC_MASK) {
+			case IEC958_AES1_CON_MAGNETIC_ID:
+				bits |= 0x00; break;
+			case IEC958_AES1_CON_DIGDIGCONV_ID:
+				bits |= 0x20; break;
+			default:
+			case IEC958_AES1_CON_LASEROPT_ID:
+				bits |= 0x40; break;
+			}
+		}
+		switch (diga->status[3] & IEC958_AES3_CON_FS) {
+		default:
+		case IEC958_AES3_CON_FS_44100: bits |= 0x00; break;
+		case IEC958_AES3_CON_FS_48000: bits |= 0x02; break;
+		case IEC958_AES3_CON_FS_32000: bits |= 0x04; break;
+		}
+	} else {
+		bits = 0x00;	/* professional mode */
+		if (diga->status[0] & IEC958_AES0_NONAUDIO)
+			bits &= ~0x02;
+		else
+			bits |= 0x02;
+		/* CHECKME: I'm not sure about the bit order in val here */
+		switch (diga->status[0] & IEC958_AES0_PRO_FS) {
+		case IEC958_AES0_PRO_FS_32000:	bits |= 0x00; break;
+		case IEC958_AES0_PRO_FS_44100:	bits |= 0x10; break;	/* 44.1kHz */
+		case IEC958_AES0_PRO_FS_48000:	bits |= 0x08; break;	/* 48kHz */
+		default:
+		case IEC958_AES0_PRO_FS_NOTID: bits |= 0x18; break;
+		}
+		switch (diga->status[0] & IEC958_AES0_PRO_EMPHASIS) {
+		case IEC958_AES0_PRO_EMPHASIS_NONE: bits |= 0x20; break;
+		case IEC958_AES0_PRO_EMPHASIS_5015: bits |= 0x40; break;
+		case IEC958_AES0_PRO_EMPHASIS_CCITT: bits |= 0x00; break;
+		default:
+		case IEC958_AES0_PRO_EMPHASIS_NOTID: bits |= 0x60; break;
+		}
+		switch (diga->status[1] & IEC958_AES1_PRO_MODE) {
+		case IEC958_AES1_PRO_MODE_TWO:
+		case IEC958_AES1_PRO_MODE_STEREOPHONIC: bits |= 0x00; break;
+		default: bits |= 0x80; break;
+		}
+	}
+	return bits;
+}
+
+#endif /* SND_CS8403 */
+
+#ifdef SND_CS8404
+
+#ifndef SND_CS8404_DECL
+#define SND_CS8404_DECL static
+#endif
+#ifndef SND_CS8404_DECODE
+#define SND_CS8404_DECODE snd_cs8404_decode_spdif_bits
+#endif
+#ifndef SND_CS8404_ENCODE
+#define SND_CS8404_ENCODE snd_cs8404_encode_spdif_bits
+#endif
+
+
+SND_CS8404_DECL void SND_CS8404_DECODE(struct snd_aes_iec958 *diga, unsigned char bits)
+{
+	if (bits & 0x10) {	/* consumer */
+		if (!(bits & 0x20))
+			diga->status[0] |= IEC958_AES0_CON_NOT_COPYRIGHT;
+		if (!(bits & 0x40))
+			diga->status[0] |= IEC958_AES0_CON_EMPHASIS_5015;
+		if (!(bits & 0x80))
+			diga->status[1] |= IEC958_AES1_CON_ORIGINAL;
+		switch (bits & 0x03) {
+		case 0x00: diga->status[1] |= IEC958_AES1_CON_DAT; break;
+		case 0x03: diga->status[1] |= IEC958_AES1_CON_GENERAL; break;
+		}
+		switch (bits & 0x06) {
+		case 0x02: diga->status[3] |= IEC958_AES3_CON_FS_32000; break;
+		case 0x04: diga->status[3] |= IEC958_AES3_CON_FS_48000; break;
+		case 0x06: diga->status[3] |= IEC958_AES3_CON_FS_44100; break;
+		}
+	} else {
+		diga->status[0] = IEC958_AES0_PROFESSIONAL;
+		if (!(bits & 0x04))
+			diga->status[0] |= IEC958_AES0_NONAUDIO;
+		switch (bits & 0x60) {
+		case 0x00: diga->status[0] |= IEC958_AES0_PRO_FS_32000; break;
+		case 0x40: diga->status[0] |= IEC958_AES0_PRO_FS_44100; break;
+		case 0x20: diga->status[0] |= IEC958_AES0_PRO_FS_48000; break;
+		case 0x60: diga->status[0] |= IEC958_AES0_PRO_FS_NOTID; break;
+		}
+		switch (bits & 0x03) {
+		case 0x02: diga->status[0] |= IEC958_AES0_PRO_EMPHASIS_NONE; break;
+		case 0x01: diga->status[0] |= IEC958_AES0_PRO_EMPHASIS_5015; break;
+		case 0x00: diga->status[0] |= IEC958_AES0_PRO_EMPHASIS_CCITT; break;
+		case 0x03: diga->status[0] |= IEC958_AES0_PRO_EMPHASIS_NOTID; break;
+		}
+		if (!(bits & 0x80))
+			diga->status[1] |= IEC958_AES1_PRO_MODE_STEREOPHONIC;
+	}
+}
+
+SND_CS8404_DECL unsigned char SND_CS8404_ENCODE(struct snd_aes_iec958 *diga)
+{
+	unsigned char bits;
+
+	if (!(diga->status[0] & IEC958_AES0_PROFESSIONAL)) {
+		bits = 0x10;	/* consumer mode */
+		if (!(diga->status[0] & IEC958_AES0_CON_NOT_COPYRIGHT))
+			bits |= 0x20;
+		if ((diga->status[0] & IEC958_AES0_CON_EMPHASIS) == IEC958_AES0_CON_EMPHASIS_NONE)
+			bits |= 0x40;
+		if (!(diga->status[1] & IEC958_AES1_CON_ORIGINAL))
+			bits |= 0x80;
+		if ((diga->status[1] & IEC958_AES1_CON_CATEGORY) == IEC958_AES1_CON_GENERAL)
+			bits |= 0x03;
+		switch (diga->status[3] & IEC958_AES3_CON_FS) {
+		default:
+		case IEC958_AES3_CON_FS_44100: bits |= 0x06; break;
+		case IEC958_AES3_CON_FS_48000: bits |= 0x04; break;
+		case IEC958_AES3_CON_FS_32000: bits |= 0x02; break;
+		}
+	} else {
+		bits = 0x00;	/* professional mode */
+		if (!(diga->status[0] & IEC958_AES0_NONAUDIO))
+			bits |= 0x04;
+		switch (diga->status[0] & IEC958_AES0_PRO_FS) {
+		case IEC958_AES0_PRO_FS_32000:	bits |= 0x00; break;
+		case IEC958_AES0_PRO_FS_44100:	bits |= 0x40; break;	/* 44.1kHz */
+		case IEC958_AES0_PRO_FS_48000:	bits |= 0x20; break;	/* 48kHz */
+		default:
+		case IEC958_AES0_PRO_FS_NOTID:	bits |= 0x00; break;
+		}
+		switch (diga->status[0] & IEC958_AES0_PRO_EMPHASIS) {
+		case IEC958_AES0_PRO_EMPHASIS_NONE: bits |= 0x02; break;
+		case IEC958_AES0_PRO_EMPHASIS_5015: bits |= 0x01; break;
+		case IEC958_AES0_PRO_EMPHASIS_CCITT: bits |= 0x00; break;
+		default:
+		case IEC958_AES0_PRO_EMPHASIS_NOTID: bits |= 0x03; break;
+		}
+		switch (diga->status[1] & IEC958_AES1_PRO_MODE) {
+		case IEC958_AES1_PRO_MODE_TWO:
+		case IEC958_AES1_PRO_MODE_STEREOPHONIC: bits |= 0x00; break;
+		default: bits |= 0x80; break;
+		}
+	}
+	return bits;
+}
+
+#endif /* SND_CS8404 */
+
+#endif /* __SOUND_CS8403_H */
diff --git a/include/sound/cs8427.h b/include/sound/cs8427.h
new file mode 100644
index 00000000..f862cfff
--- /dev/null
+++ b/include/sound/cs8427.h
@@ -0,0 +1,201 @@
+#ifndef __SOUND_CS8427_H
+#define __SOUND_CS8427_H
+
+/*
+ *  Routines for Cirrus Logic CS8427
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>,
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <sound/i2c.h>
+
+#define CS8427_BASE_ADDR	0x10	/* base I2C address */
+
+#define CS8427_REG_AUTOINC	0x80	/* flag - autoincrement */
+#define CS8427_REG_CONTROL1	0x01
+#define CS8427_REG_CONTROL2	0x02
+#define CS8427_REG_DATAFLOW	0x03
+#define CS8427_REG_CLOCKSOURCE	0x04
+#define CS8427_REG_SERIALINPUT	0x05
+#define CS8427_REG_SERIALOUTPUT	0x06
+#define CS8427_REG_INT1STATUS	0x07
+#define CS8427_REG_INT2STATUS	0x08
+#define CS8427_REG_INT1MASK	0x09
+#define CS8427_REG_INT1MODEMSB	0x0a
+#define CS8427_REG_INT1MODELSB	0x0b
+#define CS8427_REG_INT2MASK	0x0c
+#define CS8427_REG_INT2MODEMSB	0x0d
+#define CS8427_REG_INT2MODELSB	0x0e
+#define CS8427_REG_RECVCSDATA	0x0f
+#define CS8427_REG_RECVERRORS	0x10
+#define CS8427_REG_RECVERRMASK	0x11
+#define CS8427_REG_CSDATABUF	0x12
+#define CS8427_REG_UDATABUF	0x13
+#define CS8427_REG_QSUBCODE	0x14	/* 0x14-0x1d (10 bytes) */
+#define CS8427_REG_OMCKRMCKRATIO 0x1e
+#define CS8427_REG_CORU_DATABUF	0x20	/* 24 byte buffer area */
+#define CS8427_REG_ID_AND_VER	0x7f
+
+/* CS8427_REG_CONTROL1 bits */
+#define CS8427_SWCLK		(1<<7)	/* 0 = RMCK default, 1 = OMCK output on RMCK pin */
+#define CS8427_VSET		(1<<6)	/* 0 = valid PCM data, 1 = invalid PCM data */
+#define CS8427_MUTESAO		(1<<5)	/* mute control for the serial audio output port, 0 = disabled, 1 = enabled */
+#define CS8427_MUTEAES		(1<<4)	/* mute control for the AES transmitter output, 0 = disabled, 1 = enabled */
+#define CS8427_INTMASK		(3<<1)	/* interrupt output pin setup mask */
+#define CS8427_INTACTHIGH	(0<<1)	/* active high */
+#define CS8427_INTACTLOW	(1<<1)	/* active low */
+#define CS8427_INTOPENDRAIN	(2<<1)	/* open drain, active low */
+#define CS8427_TCBLDIR		(1<<0)	/* 0 = TCBL is an input, 1 = TCBL is an output */
+
+/* CS8427_REQ_CONTROL2 bits */
+#define CS8427_HOLDMASK		(3<<5)	/* action when a receiver error occurs */
+#define CS8427_HOLDLASTSAMPLE	(0<<5)	/* hold the last valid sample */
+#define CS8427_HOLDZERO		(1<<5)	/* replace the current audio sample with zero (mute) */
+#define CS8427_HOLDNOCHANGE	(2<<5)	/* do not change the received audio sample */
+#define CS8427_RMCKF		(1<<4)	/* 0 = 256*Fsi, 1 = 128*Fsi */
+#define CS8427_MMR		(1<<3)	/* AES3 receiver operation, 0 = stereo, 1 = mono */
+#define CS8427_MMT		(1<<2)	/* AES3 transmitter operation, 0 = stereo, 1 = mono */
+#define CS8427_MMTCS		(1<<1)	/* 0 = use A + B CS data, 1 = use MMTLR CS data */
+#define CS8427_MMTLR		(1<<0)	/* 0 = use A CS data, 1 = use B CS data */
+
+/* CS8427_REG_DATAFLOW */
+#define CS8427_TXOFF		(1<<6)	/* AES3 transmitter Output, 0 = normal operation, 1 = off (0V) */
+#define CS8427_AESBP		(1<<5)	/* AES3 hardware bypass mode, 0 = normal, 1 = bypass (RX->TX) */
+#define CS8427_TXDMASK		(3<<3)	/* AES3 Transmitter Data Source Mask */
+#define CS8427_TXDSERIAL	(1<<3)	/* TXD - serial audio input port */
+#define CS8427_TXAES3DRECEIVER	(2<<3)	/* TXD - AES3 receiver */
+#define CS8427_SPDMASK		(3<<1)	/* Serial Audio Output Port Data Source Mask */
+#define CS8427_SPDSERIAL	(1<<1)	/* SPD - serial audio input port */
+#define CS8427_SPDAES3RECEIVER	(2<<1)	/* SPD - AES3 receiver */
+
+/* CS8427_REG_CLOCKSOURCE */
+#define CS8427_RUN		(1<<6)	/* 0 = clock off, 1 = clock on */
+#define CS8427_CLKMASK		(3<<4)	/* OMCK frequency mask */
+#define CS8427_CLK256		(0<<4)	/* 256*Fso */
+#define CS8427_CLK384		(1<<4)	/* 384*Fso */
+#define CS8427_CLK512		(2<<4)	/* 512*Fso */
+#define CS8427_OUTC		(1<<3)	/* Output Time Base, 0 = OMCK, 1 = recovered input clock */
+#define CS8427_INC		(1<<2)	/* Input Time Base Clock Source, 0 = recoverd input clock, 1 = OMCK input pin */
+#define CS8427_RXDMASK		(3<<0)	/* Recovered Input Clock Source Mask */
+#define CS8427_RXDILRCK		(0<<0)	/* 256*Fsi from ILRCK pin */
+#define CS8427_RXDAES3INPUT	(1<<0)	/* 256*Fsi from AES3 input */
+#define CS8427_EXTCLOCKRESET	(2<<0)	/* bypass PLL, 256*Fsi clock, synchronous reset */
+#define CS8427_EXTCLOCK		(3<<0)	/* bypass PLL, 256*Fsi clock */
+
+/* CS8427_REG_SERIALINPUT */
+#define CS8427_SIMS		(1<<7)	/* 0 = slave, 1 = master mode */
+#define CS8427_SISF		(1<<6)	/* ISCLK freq, 0 = 64*Fsi, 1 = 128*Fsi */
+#define CS8427_SIRESMASK	(3<<4)	/* Resolution of the input data for right justified formats */
+#define CS8427_SIRES24		(0<<4)	/* SIRES 24-bit */
+#define CS8427_SIRES20		(1<<4)	/* SIRES 20-bit */
+#define CS8427_SIRES16		(2<<4)	/* SIRES 16-bit */
+#define CS8427_SIJUST		(1<<3)	/* Justification of SDIN data relative to ILRCK, 0 = left-justified, 1 = right-justified */
+#define CS8427_SIDEL		(1<<2)	/* Delay of SDIN data relative to ILRCK for left-justified data formats, 0 = first ISCLK period, 1 = second ISCLK period */
+#define CS8427_SISPOL		(1<<1)	/* ICLK clock polarity, 0 = rising edge of ISCLK, 1 = falling edge of ISCLK */
+#define CS8427_SILRPOL		(1<<0)	/* ILRCK clock polarity, 0 = SDIN data left channel when ILRCK is high, 1 = SDIN right when ILRCK is high */
+
+/* CS8427_REG_SERIALOUTPUT */
+#define CS8427_SOMS		(1<<7)	/* 0 = slave, 1 = master mode */
+#define CS8427_SOSF		(1<<6)	/* OSCLK freq, 0 = 64*Fso, 1 = 128*Fso */
+#define CS8427_SORESMASK	(3<<4)	/* Resolution of the output data on SDOUT and AES3 output */
+#define CS8427_SORES24		(0<<4)	/* SIRES 24-bit */
+#define CS8427_SORES20		(1<<4)	/* SIRES 20-bit */
+#define CS8427_SORES16		(2<<4)	/* SIRES 16-bit */
+#define CS8427_SORESDIRECT	(2<<4)	/* SIRES direct copy from AES3 receiver */
+#define CS8427_SOJUST		(1<<3)	/* Justification of SDOUT data relative to OLRCK, 0 = left-justified, 1 = right-justified */
+#define CS8427_SODEL		(1<<2)	/* Delay of SDOUT data relative to OLRCK for left-justified data formats, 0 = first OSCLK period, 1 = second OSCLK period */
+#define CS8427_SOSPOL		(1<<1)	/* OSCLK clock polarity, 0 = rising edge of ISCLK, 1 = falling edge of ISCLK */
+#define CS8427_SOLRPOL		(1<<0)	/* OLRCK clock polarity, 0 = SDOUT data left channel when OLRCK is high, 1 = SDOUT right when OLRCK is high */
+
+/* CS8427_REG_INT1STATUS */
+#define CS8427_TSLIP		(1<<7)	/* AES3 transmitter source data slip interrupt */
+#define CS8427_OSLIP		(1<<6)	/* Serial audio output port data slip interrupt */
+#define CS8427_DETC		(1<<2)	/* D to E C-buffer transfer interrupt */
+#define CS8427_EFTC		(1<<1)	/* E to F C-buffer transfer interrupt */
+#define CS8427_RERR		(1<<0)	/* A receiver error has occurred */
+
+/* CS8427_REG_INT2STATUS */
+#define CS8427_DETU		(1<<3)	/* D to E U-buffer transfer interrupt */
+#define CS8427_EFTU		(1<<2)	/* E to F U-buffer transfer interrupt */
+#define CS8427_QCH		(1<<1)	/* A new block of Q-subcode data is available for reading */
+
+/* CS8427_REG_INT1MODEMSB && CS8427_REG_INT1MODELSB */
+/* bits are defined in CS8427_REG_INT1STATUS */
+/* CS8427_REG_INT2MODEMSB && CS8427_REG_INT2MODELSB */
+/* bits are defined in CS8427_REG_INT2STATUS */
+#define CS8427_INTMODERISINGMSB	0
+#define CS8427_INTMODERESINGLSB	0
+#define CS8427_INTMODEFALLINGMSB 0
+#define CS8427_INTMODEFALLINGLSB 1
+#define CS8427_INTMODELEVELMSB	1
+#define CS8427_INTMODELEVELLSB	0
+
+/* CS8427_REG_RECVCSDATA */
+#define CS8427_AUXMASK		(15<<4)	/* auxiliary data field width */
+#define CS8427_AUXSHIFT		4
+#define CS8427_PRO		(1<<3)	/* Channel status block format indicator */
+#define CS8427_AUDIO		(1<<2)	/* Audio indicator (0 = audio, 1 = nonaudio */
+#define CS8427_COPY		(1<<1)	/* 0 = copyright asserted, 1 = copyright not asserted */
+#define CS8427_ORIG		(1<<0)	/* SCMS generation indicator, 0 = 1st generation or highter, 1 = original */
+
+/* CS8427_REG_RECVERRORS */
+/* CS8427_REG_RECVERRMASK for CS8427_RERR */
+#define CS8427_QCRC		(1<<6)	/* Q-subcode data CRC error indicator */
+#define CS8427_CCRC		(1<<5)	/* Chancnel Status Block Cyclick Redundancy Check Bit */
+#define CS8427_UNLOCK		(1<<4)	/* PLL lock status bit */
+#define CS8427_V		(1<<3)	/* 0 = valid data */
+#define CS8427_CONF		(1<<2)	/* Confidence bit */
+#define CS8427_BIP		(1<<1)	/* Bi-phase error bit */
+#define CS8427_PAR		(1<<0)	/* Parity error */
+
+/* CS8427_REG_CSDATABUF	*/
+#define CS8427_BSEL		(1<<5)	/* 0 = CS data, 1 = U data */
+#define CS8427_CBMR		(1<<4)	/* 0 = overwrite first 5 bytes for CS D to E buffer, 1 = prevent */
+#define CS8427_DETCI		(1<<3)	/* D to E CS data buffer transfer inhibit bit, 0 = allow, 1 = inhibit */
+#define CS8427_EFTCI		(1<<2)	/* E to F CS data buffer transfer inhibit bit, 0 = allow, 1 = inhibit */
+#define CS8427_CAM		(1<<1)	/* CS data buffer control port access mode bit, 0 = one byte, 1 = two byte */
+#define CS8427_CHS		(1<<0)	/* Channel select bit, 0 = Channel A, 1 = Channel B */
+
+/* CS8427_REG_UDATABUF */
+#define CS8427_UD		(1<<4)	/* User data pin (U) direction, 0 = input, 1 = output */
+#define CS8427_UBMMASK		(3<<2)	/* Operating mode of the AES3 U bit manager */
+#define CS8427_UBMZEROS		(0<<2)	/* transmit all zeros mode */
+#define CS8427_UBMBLOCK		(1<<2)	/* block mode */
+#define CS8427_DETUI		(1<<1)	/* D to E U-data buffer transfer inhibit bit, 0 = allow, 1 = inhibit */
+#define CS8427_EFTUI		(1<<1)	/* E to F U-data buffer transfer inhibit bit, 0 = allow, 1 = inhibit */
+
+/* CS8427_REG_ID_AND_VER */
+#define CS8427_IDMASK		(15<<4)
+#define CS8427_IDSHIFT		4
+#define CS8427_VERMASK		(15<<0)
+#define CS8427_VERSHIFT		0
+#define CS8427_VER8427A		0x71
+
+struct snd_pcm_substream;
+
+int snd_cs8427_create(struct snd_i2c_bus *bus, unsigned char addr,
+		      unsigned int reset_timeout, struct snd_i2c_device **r_cs8427);
+int snd_cs8427_reg_write(struct snd_i2c_device *device, unsigned char reg,
+			 unsigned char val);
+int snd_cs8427_iec958_build(struct snd_i2c_device *cs8427,
+			    struct snd_pcm_substream *playback_substream,
+			    struct snd_pcm_substream *capture_substream);
+int snd_cs8427_iec958_active(struct snd_i2c_device *cs8427, int active);
+int snd_cs8427_iec958_pcm(struct snd_i2c_device *cs8427, unsigned int rate);
+
+#endif /* __SOUND_CS8427_H */
diff --git a/include/sound/dmaengine_pcm.h b/include/sound/dmaengine_pcm.h
new file mode 100644
index 00000000..a8fcaa6d
--- /dev/null
+++ b/include/sound/dmaengine_pcm.h
@@ -0,0 +1,49 @@
+/*
+ *  Copyright (C) 2012, Analog Devices Inc.
+ *	Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#ifndef __SOUND_DMAENGINE_PCM_H__
+#define __SOUND_DMAENGINE_PCM_H__
+
+#include <sound/pcm.h>
+#include <linux/dmaengine.h>
+
+/**
+ * snd_pcm_substream_to_dma_direction - Get dma_transfer_direction for a PCM
+ *   substream
+ * @substream: PCM substream
+ */
+static inline enum dma_transfer_direction
+snd_pcm_substream_to_dma_direction(const struct snd_pcm_substream *substream)
+{
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		return DMA_MEM_TO_DEV;
+	else
+		return DMA_DEV_TO_MEM;
+}
+
+void snd_dmaengine_pcm_set_data(struct snd_pcm_substream *substream, void *data);
+void *snd_dmaengine_pcm_get_data(struct snd_pcm_substream *substream);
+
+int snd_hwparams_to_dma_slave_config(const struct snd_pcm_substream *substream,
+	const struct snd_pcm_hw_params *params, struct dma_slave_config *slave_config);
+int snd_dmaengine_pcm_trigger(struct snd_pcm_substream *substream, int cmd);
+snd_pcm_uframes_t snd_dmaengine_pcm_pointer(struct snd_pcm_substream *substream);
+
+int snd_dmaengine_pcm_open(struct snd_pcm_substream *substream,
+	dma_filter_fn filter_fn, void *filter_data);
+int snd_dmaengine_pcm_close(struct snd_pcm_substream *substream);
+
+struct dma_chan *snd_dmaengine_pcm_get_chan(struct snd_pcm_substream *substream);
+
+#endif
diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h
new file mode 100644
index 00000000..4f865df4
--- /dev/null
+++ b/include/sound/emu10k1.h
@@ -0,0 +1,2248 @@
+#ifndef __SOUND_EMU10K1_H
+#define __SOUND_EMU10K1_H
+
+#include <linux/types.h>
+
+/*
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>,
+ *		     Creative Labs, Inc.
+ *  Definitions for EMU10K1 (SB Live!) chips
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#ifdef __KERNEL__
+
+#include <sound/pcm.h>
+#include <sound/rawmidi.h>
+#include <sound/hwdep.h>
+#include <sound/ac97_codec.h>
+#include <sound/util_mem.h>
+#include <sound/pcm-indirect.h>
+#include <sound/timer.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+
+#include <asm/io.h>
+
+/* ------------------- DEFINES -------------------- */
+
+#define EMUPAGESIZE     4096
+#define MAXREQVOICES    8
+#define MAXPAGES        8192
+#define RESERVED        0
+#define NUM_MIDI        16
+#define NUM_G           64              /* use all channels */
+#define NUM_FXSENDS     4
+#define NUM_EFX_PLAYBACK    16
+
+/* FIXME? - according to the OSS driver the EMU10K1 needs a 29 bit DMA mask */
+#define EMU10K1_DMA_MASK	0x7fffffffUL	/* 31bit */
+#define AUDIGY_DMA_MASK		0x7fffffffUL	/* 31bit FIXME - 32 should work? */
+						/* See ALSA bug #1276 - rlrevell */
+
+#define TMEMSIZE        256*1024
+#define TMEMSIZEREG     4
+
+#define IP_TO_CP(ip) ((ip == 0) ? 0 : (((0x00001000uL | (ip & 0x00000FFFL)) << (((ip >> 12) & 0x000FL) + 4)) & 0xFFFF0000uL))
+
+// Audigy specify registers are prefixed with 'A_'
+
+/************************************************************************************************/
+/* PCI function 0 registers, address = <val> + PCIBASE0						*/
+/************************************************************************************************/
+
+#define PTR			0x00		/* Indexed register set pointer register	*/
+						/* NOTE: The CHANNELNUM and ADDRESS words can	*/
+						/* be modified independently of each other.	*/
+#define PTR_CHANNELNUM_MASK	0x0000003f	/* For each per-channel register, indicates the	*/
+						/* channel number of the register to be		*/
+						/* accessed.  For non per-channel registers the	*/
+						/* value should be set to zero.			*/
+#define PTR_ADDRESS_MASK	0x07ff0000	/* Register index				*/
+#define A_PTR_ADDRESS_MASK	0x0fff0000
+
+#define DATA			0x04		/* Indexed register set data register		*/
+
+#define IPR			0x08		/* Global interrupt pending register		*/
+						/* Clear pending interrupts by writing a 1 to	*/
+						/* the relevant bits and zero to the other bits	*/
+#define IPR_P16V		0x80000000	/* Bit set when the CA0151 P16V chip wishes
+						   to interrupt */
+#define IPR_GPIOMSG		0x20000000	/* GPIO message interrupt (RE'd, still not sure 
+						   which INTE bits enable it)			*/
+
+/* The next two interrupts are for the midi port on the Audigy Drive (A_MPU1)			*/
+#define IPR_A_MIDITRANSBUFEMPTY2 0x10000000	/* MIDI UART transmit buffer empty		*/
+#define IPR_A_MIDIRECVBUFEMPTY2	0x08000000	/* MIDI UART receive buffer empty		*/
+
+#define IPR_SPDIFBUFFULL	0x04000000	/* SPDIF capture related, 10k2 only? (RE)	*/
+#define IPR_SPDIFBUFHALFFULL	0x02000000	/* SPDIF capture related? (RE)			*/
+
+#define IPR_SAMPLERATETRACKER	0x01000000	/* Sample rate tracker lock status change	*/
+#define IPR_FXDSP		0x00800000	/* Enable FX DSP interrupts			*/
+#define IPR_FORCEINT		0x00400000	/* Force Sound Blaster interrupt		*/
+#define IPR_PCIERROR		0x00200000	/* PCI bus error				*/
+#define IPR_VOLINCR		0x00100000	/* Volume increment button pressed		*/
+#define IPR_VOLDECR		0x00080000	/* Volume decrement button pressed		*/
+#define IPR_MUTE		0x00040000	/* Mute button pressed				*/
+#define IPR_MICBUFFULL		0x00020000	/* Microphone buffer full			*/
+#define IPR_MICBUFHALFFULL	0x00010000	/* Microphone buffer half full			*/
+#define IPR_ADCBUFFULL		0x00008000	/* ADC buffer full				*/
+#define IPR_ADCBUFHALFFULL	0x00004000	/* ADC buffer half full				*/
+#define IPR_EFXBUFFULL		0x00002000	/* Effects buffer full				*/
+#define IPR_EFXBUFHALFFULL	0x00001000	/* Effects buffer half full			*/
+#define IPR_GPSPDIFSTATUSCHANGE	0x00000800	/* GPSPDIF channel status change		*/
+#define IPR_CDROMSTATUSCHANGE	0x00000400	/* CD-ROM channel status change			*/
+#define IPR_INTERVALTIMER	0x00000200	/* Interval timer terminal count		*/
+#define IPR_MIDITRANSBUFEMPTY	0x00000100	/* MIDI UART transmit buffer empty		*/
+#define IPR_MIDIRECVBUFEMPTY	0x00000080	/* MIDI UART receive buffer empty		*/
+#define IPR_CHANNELLOOP		0x00000040	/* Channel (half) loop interrupt(s) pending	*/
+#define IPR_CHANNELNUMBERMASK	0x0000003f	/* When IPR_CHANNELLOOP is set, indicates the	*/
+						/* highest set channel in CLIPL, CLIPH, HLIPL,  */
+						/* or HLIPH.  When IP is written with CL set,	*/
+						/* the bit in H/CLIPL or H/CLIPH corresponding	*/
+						/* to the CIN value written will be cleared.	*/
+
+#define INTE			0x0c		/* Interrupt enable register			*/
+#define INTE_VIRTUALSB_MASK	0xc0000000	/* Virtual Soundblaster I/O port capture	*/
+#define INTE_VIRTUALSB_220	0x00000000	/* Capture at I/O base address 0x220-0x22f	*/
+#define INTE_VIRTUALSB_240	0x40000000	/* Capture at I/O base address 0x240		*/
+#define INTE_VIRTUALSB_260	0x80000000	/* Capture at I/O base address 0x260		*/
+#define INTE_VIRTUALSB_280	0xc0000000	/* Capture at I/O base address 0x280		*/
+#define INTE_VIRTUALMPU_MASK	0x30000000	/* Virtual MPU I/O port capture			*/
+#define INTE_VIRTUALMPU_300	0x00000000	/* Capture at I/O base address 0x300-0x301	*/
+#define INTE_VIRTUALMPU_310	0x10000000	/* Capture at I/O base address 0x310		*/
+#define INTE_VIRTUALMPU_320	0x20000000	/* Capture at I/O base address 0x320		*/
+#define INTE_VIRTUALMPU_330	0x30000000	/* Capture at I/O base address 0x330		*/
+#define INTE_MASTERDMAENABLE	0x08000000	/* Master DMA emulation at 0x000-0x00f		*/
+#define INTE_SLAVEDMAENABLE	0x04000000	/* Slave DMA emulation at 0x0c0-0x0df		*/
+#define INTE_MASTERPICENABLE	0x02000000	/* Master PIC emulation at 0x020-0x021		*/
+#define INTE_SLAVEPICENABLE	0x01000000	/* Slave PIC emulation at 0x0a0-0x0a1		*/
+#define INTE_VSBENABLE		0x00800000	/* Enable virtual Soundblaster			*/
+#define INTE_ADLIBENABLE	0x00400000	/* Enable AdLib emulation at 0x388-0x38b	*/
+#define INTE_MPUENABLE		0x00200000	/* Enable virtual MPU				*/
+#define INTE_FORCEINT		0x00100000	/* Continuously assert INTAN			*/
+
+#define INTE_MRHANDENABLE	0x00080000	/* Enable the "Mr. Hand" logic			*/
+						/* NOTE: There is no reason to use this under	*/
+						/* Linux, and it will cause odd hardware 	*/
+						/* behavior and possibly random segfaults and	*/
+						/* lockups if enabled.				*/
+
+/* The next two interrupts are for the midi port on the Audigy Drive (A_MPU1)			*/
+#define INTE_A_MIDITXENABLE2	0x00020000	/* Enable MIDI transmit-buffer-empty interrupts	*/
+#define INTE_A_MIDIRXENABLE2	0x00010000	/* Enable MIDI receive-buffer-empty interrupts	*/
+
+
+#define INTE_SAMPLERATETRACKER	0x00002000	/* Enable sample rate tracker interrupts	*/
+						/* NOTE: This bit must always be enabled       	*/
+#define INTE_FXDSPENABLE	0x00001000	/* Enable FX DSP interrupts			*/
+#define INTE_PCIERRORENABLE	0x00000800	/* Enable PCI bus error interrupts		*/
+#define INTE_VOLINCRENABLE	0x00000400	/* Enable volume increment button interrupts	*/
+#define INTE_VOLDECRENABLE	0x00000200	/* Enable volume decrement button interrupts	*/
+#define INTE_MUTEENABLE		0x00000100	/* Enable mute button interrupts		*/
+#define INTE_MICBUFENABLE	0x00000080	/* Enable microphone buffer interrupts		*/
+#define INTE_ADCBUFENABLE	0x00000040	/* Enable ADC buffer interrupts			*/
+#define INTE_EFXBUFENABLE	0x00000020	/* Enable Effects buffer interrupts		*/
+#define INTE_GPSPDIFENABLE	0x00000010	/* Enable GPSPDIF status interrupts		*/
+#define INTE_CDSPDIFENABLE	0x00000008	/* Enable CDSPDIF status interrupts		*/
+#define INTE_INTERVALTIMERENB	0x00000004	/* Enable interval timer interrupts		*/
+#define INTE_MIDITXENABLE	0x00000002	/* Enable MIDI transmit-buffer-empty interrupts	*/
+#define INTE_MIDIRXENABLE	0x00000001	/* Enable MIDI receive-buffer-empty interrupts	*/
+
+#define WC			0x10		/* Wall Clock register				*/
+#define WC_SAMPLECOUNTER_MASK	0x03FFFFC0	/* Sample periods elapsed since reset		*/
+#define WC_SAMPLECOUNTER	0x14060010
+#define WC_CURRENTCHANNEL	0x0000003F	/* Channel [0..63] currently being serviced	*/
+						/* NOTE: Each channel takes 1/64th of a sample	*/
+						/* period to be serviced.			*/
+
+#define HCFG			0x14		/* Hardware config register			*/
+						/* NOTE: There is no reason to use the legacy	*/
+						/* SoundBlaster emulation stuff described below	*/
+						/* under Linux, and all kinds of weird hardware	*/
+						/* behavior can result if you try.  Don't.	*/
+#define HCFG_LEGACYFUNC_MASK	0xe0000000	/* Legacy function number 			*/
+#define HCFG_LEGACYFUNC_MPU	0x00000000	/* Legacy MPU	 				*/
+#define HCFG_LEGACYFUNC_SB	0x40000000	/* Legacy SB					*/
+#define HCFG_LEGACYFUNC_AD	0x60000000	/* Legacy AD					*/
+#define HCFG_LEGACYFUNC_MPIC	0x80000000	/* Legacy MPIC					*/
+#define HCFG_LEGACYFUNC_MDMA	0xa0000000	/* Legacy MDMA					*/
+#define HCFG_LEGACYFUNC_SPCI	0xc0000000	/* Legacy SPCI					*/
+#define HCFG_LEGACYFUNC_SDMA	0xe0000000	/* Legacy SDMA					*/
+#define HCFG_IOCAPTUREADDR	0x1f000000	/* The 4 LSBs of the captured I/O address.	*/
+#define HCFG_LEGACYWRITE	0x00800000	/* 1 = write, 0 = read 				*/
+#define HCFG_LEGACYWORD		0x00400000	/* 1 = word, 0 = byte 				*/
+#define HCFG_LEGACYINT		0x00200000	/* 1 = legacy event captured. Write 1 to clear.	*/
+						/* NOTE: The rest of the bits in this register	*/
+						/* _are_ relevant under Linux.			*/
+#define HCFG_PUSH_BUTTON_ENABLE 0x00100000	/* Enables Volume Inc/Dec and Mute functions    */
+#define HCFG_BAUD_RATE		0x00080000	/* 0 = 48kHz, 1 = 44.1kHz			*/
+#define HCFG_EXPANDED_MEM	0x00040000	/* 1 = any 16M of 4G addr, 0 = 32M of 2G addr	*/
+#define HCFG_CODECFORMAT_MASK	0x00030000	/* CODEC format					*/
+
+/* Specific to Alice2, CA0102 */
+#define HCFG_CODECFORMAT_AC97_1	0x00000000	/* AC97 CODEC format -- Ver 1.03		*/
+#define HCFG_CODECFORMAT_AC97_2	0x00010000	/* AC97 CODEC format -- Ver 2.1			*/
+#define HCFG_AUTOMUTE_ASYNC	0x00008000	/* When set, the async sample rate convertors	*/
+						/* will automatically mute their output when	*/
+						/* they are not rate-locked to the external	*/
+						/* async audio source  				*/
+#define HCFG_AUTOMUTE_SPDIF	0x00004000	/* When set, the async sample rate convertors	*/
+						/* will automatically mute their output when	*/
+						/* the SPDIF V-bit indicates invalid audio	*/
+#define HCFG_EMU32_SLAVE	0x00002000	/* 0 = Master, 1 = Slave. Slave for EMU1010	*/
+#define HCFG_SLOW_RAMP		0x00001000	/* Increases Send Smoothing time constant	*/
+/* 0x00000800 not used on Alice2 */
+#define HCFG_PHASE_TRACK_MASK	0x00000700	/* When set, forces corresponding input to	*/
+						/* phase track the previous input.		*/
+						/* I2S0 can phase track the last S/PDIF input	*/
+#define HCFG_I2S_ASRC_ENABLE	0x00000070	/* When set, enables asynchronous sample rate   */
+						/* conversion for the corresponding		*/
+ 						/* I2S format input				*/
+/* Rest of HCFG 0x0000000f same as below. LOCKSOUNDCACHE etc.  */
+
+
+
+/* Older chips */
+#define HCFG_CODECFORMAT_AC97	0x00000000	/* AC97 CODEC format -- Primary Output		*/
+#define HCFG_CODECFORMAT_I2S	0x00010000	/* I2S CODEC format -- Secondary (Rear) Output	*/
+#define HCFG_GPINPUT0		0x00004000	/* External pin112				*/
+#define HCFG_GPINPUT1		0x00002000	/* External pin110				*/
+#define HCFG_GPOUTPUT_MASK	0x00001c00	/* External pins which may be controlled	*/
+#define HCFG_GPOUT0		0x00001000	/* External pin? (spdif enable on 5.1)		*/
+#define HCFG_GPOUT1		0x00000800	/* External pin? (IR)				*/
+#define HCFG_GPOUT2		0x00000400	/* External pin? (IR)				*/
+#define HCFG_JOYENABLE      	0x00000200	/* Internal joystick enable    			*/
+#define HCFG_PHASETRACKENABLE	0x00000100	/* Phase tracking enable			*/
+						/* 1 = Force all 3 async digital inputs to use	*/
+						/* the same async sample rate tracker (ZVIDEO)	*/
+#define HCFG_AC3ENABLE_MASK	0x000000e0	/* AC3 async input control - Not implemented	*/
+#define HCFG_AC3ENABLE_ZVIDEO	0x00000080	/* Channels 0 and 1 replace ZVIDEO		*/
+#define HCFG_AC3ENABLE_CDSPDIF	0x00000040	/* Channels 0 and 1 replace CDSPDIF		*/
+#define HCFG_AC3ENABLE_GPSPDIF  0x00000020      /* Channels 0 and 1 replace GPSPDIF             */
+#define HCFG_AUTOMUTE		0x00000010	/* When set, the async sample rate convertors	*/
+						/* will automatically mute their output when	*/
+						/* they are not rate-locked to the external	*/
+						/* async audio source  				*/
+#define HCFG_LOCKSOUNDCACHE	0x00000008	/* 1 = Cancel bustmaster accesses to soundcache */
+						/* NOTE: This should generally never be used.  	*/
+#define HCFG_LOCKTANKCACHE_MASK	0x00000004	/* 1 = Cancel bustmaster accesses to tankcache	*/
+						/* NOTE: This should generally never be used.  	*/
+#define HCFG_LOCKTANKCACHE	0x01020014
+#define HCFG_MUTEBUTTONENABLE	0x00000002	/* 1 = Master mute button sets AUDIOENABLE = 0.	*/
+						/* NOTE: This is a 'cheap' way to implement a	*/
+						/* master mute function on the mute button, and	*/
+						/* in general should not be used unless a more	*/
+						/* sophisticated master mute function has not	*/
+						/* been written.       				*/
+#define HCFG_AUDIOENABLE	0x00000001	/* 0 = CODECs transmit zero-valued samples	*/
+						/* Should be set to 1 when the EMU10K1 is	*/
+						/* completely initialized.			*/
+
+//For Audigy, MPU port move to 0x70-0x74 ptr register
+
+#define MUDATA			0x18		/* MPU401 data register (8 bits)       		*/
+
+#define MUCMD			0x19		/* MPU401 command register (8 bits)    		*/
+#define MUCMD_RESET		0xff		/* RESET command				*/
+#define MUCMD_ENTERUARTMODE	0x3f		/* Enter_UART_mode command			*/
+						/* NOTE: All other commands are ignored		*/
+
+#define MUSTAT			MUCMD		/* MPU401 status register (8 bits)     		*/
+#define MUSTAT_IRDYN		0x80		/* 0 = MIDI data or command ACK			*/
+#define MUSTAT_ORDYN		0x40		/* 0 = MUDATA can accept a command or data	*/
+
+#define A_IOCFG			0x18		/* GPIO on Audigy card (16bits)			*/
+#define A_GPINPUT_MASK		0xff00
+#define A_GPOUTPUT_MASK		0x00ff
+
+// Audigy output/GPIO stuff taken from the kX drivers
+#define A_IOCFG_GPOUT0		0x0044		/* analog/digital				*/
+#define A_IOCFG_DISABLE_ANALOG	0x0040		/* = 'enable' for Audigy2 (chiprev=4)		*/
+#define A_IOCFG_ENABLE_DIGITAL	0x0004
+#define A_IOCFG_ENABLE_DIGITAL_AUDIGY4	0x0080
+#define A_IOCFG_UNKNOWN_20      0x0020
+#define A_IOCFG_DISABLE_AC97_FRONT      0x0080  /* turn off ac97 front -> front (10k2.1)	*/
+#define A_IOCFG_GPOUT1		0x0002		/* IR? drive's internal bypass (?)		*/
+#define A_IOCFG_GPOUT2		0x0001		/* IR */
+#define A_IOCFG_MULTIPURPOSE_JACK	0x2000  /* center+lfe+rear_center (a2/a2ex)		*/
+                                                /* + digital for generic 10k2			*/
+#define A_IOCFG_DIGITAL_JACK    0x1000          /* digital for a2 platinum			*/
+#define A_IOCFG_FRONT_JACK      0x4000
+#define A_IOCFG_REAR_JACK       0x8000
+#define A_IOCFG_PHONES_JACK     0x0100          /* LiveDrive					*/
+
+/* outputs:
+ *	for audigy2 platinum:	0xa00
+ *	for a2 platinum ex:	0x1c00
+ *	for a1 platinum:	0x0
+ */
+
+#define TIMER			0x1a		/* Timer terminal count register		*/
+						/* NOTE: After the rate is changed, a maximum	*/
+						/* of 1024 sample periods should be allowed	*/
+						/* before the new rate is guaranteed accurate.	*/
+#define TIMER_RATE_MASK		0x000003ff	/* Timer interrupt rate in sample periods	*/
+						/* 0 == 1024 periods, [1..4] are not useful	*/
+#define TIMER_RATE		0x0a00001a
+
+#define AC97DATA		0x1c		/* AC97 register set data register (16 bit)	*/
+
+#define AC97ADDRESS		0x1e		/* AC97 register set address register (8 bit)	*/
+#define AC97ADDRESS_READY	0x80		/* Read-only bit, reflects CODEC READY signal	*/
+#define AC97ADDRESS_ADDRESS	0x7f		/* Address of indexed AC97 register		*/
+
+/* Available on the Audigy 2 and Audigy 4 only. This is the P16V chip. */
+#define PTR2			0x20		/* Indexed register set pointer register	*/
+#define DATA2			0x24		/* Indexed register set data register		*/
+#define IPR2			0x28		/* P16V interrupt pending register		*/
+#define IPR2_PLAYBACK_CH_0_LOOP      0x00001000 /* Playback Channel 0 loop                               */
+#define IPR2_PLAYBACK_CH_0_HALF_LOOP 0x00000100 /* Playback Channel 0 half loop                          */
+#define IPR2_CAPTURE_CH_0_LOOP       0x00100000 /* Capture Channel 0 loop                               */
+#define IPR2_CAPTURE_CH_0_HALF_LOOP  0x00010000 /* Capture Channel 0 half loop                          */
+						/* 0x00000100 Playback. Only in once per period.
+						 * 0x00110000 Capture. Int on half buffer.
+						 */
+#define INTE2			0x2c		/* P16V Interrupt enable register. 	*/
+#define INTE2_PLAYBACK_CH_0_LOOP      0x00001000 /* Playback Channel 0 loop                               */
+#define INTE2_PLAYBACK_CH_0_HALF_LOOP 0x00000100 /* Playback Channel 0 half loop                          */
+#define INTE2_PLAYBACK_CH_1_LOOP      0x00002000 /* Playback Channel 1 loop                               */
+#define INTE2_PLAYBACK_CH_1_HALF_LOOP 0x00000200 /* Playback Channel 1 half loop                          */
+#define INTE2_PLAYBACK_CH_2_LOOP      0x00004000 /* Playback Channel 2 loop                               */
+#define INTE2_PLAYBACK_CH_2_HALF_LOOP 0x00000400 /* Playback Channel 2 half loop                          */
+#define INTE2_PLAYBACK_CH_3_LOOP      0x00008000 /* Playback Channel 3 loop                               */
+#define INTE2_PLAYBACK_CH_3_HALF_LOOP 0x00000800 /* Playback Channel 3 half loop                          */
+#define INTE2_CAPTURE_CH_0_LOOP       0x00100000 /* Capture Channel 0 loop                               */
+#define INTE2_CAPTURE_CH_0_HALF_LOOP  0x00010000 /* Caputre Channel 0 half loop                          */
+#define HCFG2			0x34		/* Defaults: 0, win2000 sets it to 00004201 */
+						/* 0x00000000 2-channel output. */
+						/* 0x00000200 8-channel output. */
+						/* 0x00000004 pauses stream/irq fail. */
+						/* Rest of bits no nothing to sound output */
+						/* bit 0: Enable P16V audio.
+						 * bit 1: Lock P16V record memory cache.
+						 * bit 2: Lock P16V playback memory cache.
+						 * bit 3: Dummy record insert zero samples.
+						 * bit 8: Record 8-channel in phase.
+						 * bit 9: Playback 8-channel in phase.
+						 * bit 11-12: Playback mixer attenuation: 0=0dB, 1=-6dB, 2=-12dB, 3=Mute.
+						 * bit 13: Playback mixer enable.
+						 * bit 14: Route SRC48 mixer output to fx engine.
+						 * bit 15: Enable IEEE 1394 chip.
+						 */
+#define IPR3			0x38		/* Cdif interrupt pending register		*/
+#define INTE3			0x3c		/* Cdif interrupt enable register. 	*/
+/************************************************************************************************/
+/* PCI function 1 registers, address = <val> + PCIBASE1						*/
+/************************************************************************************************/
+
+#define JOYSTICK1		0x00		/* Analog joystick port register		*/
+#define JOYSTICK2		0x01		/* Analog joystick port register		*/
+#define JOYSTICK3		0x02		/* Analog joystick port register		*/
+#define JOYSTICK4		0x03		/* Analog joystick port register		*/
+#define JOYSTICK5		0x04		/* Analog joystick port register		*/
+#define JOYSTICK6		0x05		/* Analog joystick port register		*/
+#define JOYSTICK7		0x06		/* Analog joystick port register		*/
+#define JOYSTICK8		0x07		/* Analog joystick port register		*/
+
+/* When writing, any write causes JOYSTICK_COMPARATOR output enable to be pulsed on write.	*/
+/* When reading, use these bitfields: */
+#define JOYSTICK_BUTTONS	0x0f		/* Joystick button data				*/
+#define JOYSTICK_COMPARATOR	0xf0		/* Joystick comparator data			*/
+
+
+/********************************************************************************************************/
+/* Emu10k1 pointer-offset register set, accessed through the PTR and DATA registers			*/
+/********************************************************************************************************/
+
+#define CPF			0x00		/* Current pitch and fraction register			*/
+#define CPF_CURRENTPITCH_MASK	0xffff0000	/* Current pitch (linear, 0x4000 == unity pitch shift) 	*/
+#define CPF_CURRENTPITCH	0x10100000
+#define CPF_STEREO_MASK		0x00008000	/* 1 = Even channel interleave, odd channel locked	*/
+#define CPF_STOP_MASK		0x00004000	/* 1 = Current pitch forced to 0			*/
+#define CPF_FRACADDRESS_MASK	0x00003fff	/* Linear fractional address of the current channel	*/
+
+#define PTRX			0x01		/* Pitch target and send A/B amounts register		*/
+#define PTRX_PITCHTARGET_MASK	0xffff0000	/* Pitch target of specified channel			*/
+#define PTRX_PITCHTARGET	0x10100001
+#define PTRX_FXSENDAMOUNT_A_MASK 0x0000ff00	/* Linear level of channel output sent to FX send bus A	*/
+#define PTRX_FXSENDAMOUNT_A	0x08080001
+#define PTRX_FXSENDAMOUNT_B_MASK 0x000000ff	/* Linear level of channel output sent to FX send bus B	*/
+#define PTRX_FXSENDAMOUNT_B	0x08000001
+
+#define CVCF			0x02		/* Current volume and filter cutoff register		*/
+#define CVCF_CURRENTVOL_MASK	0xffff0000	/* Current linear volume of specified channel		*/
+#define CVCF_CURRENTVOL		0x10100002
+#define CVCF_CURRENTFILTER_MASK	0x0000ffff	/* Current filter cutoff frequency of specified channel	*/
+#define CVCF_CURRENTFILTER	0x10000002
+
+#define VTFT			0x03		/* Volume target and filter cutoff target register	*/
+#define VTFT_VOLUMETARGET_MASK	0xffff0000	/* Volume target of specified channel			*/
+#define VTFT_VOLUMETARGET	0x10100003
+#define VTFT_FILTERTARGET_MASK	0x0000ffff	/* Filter cutoff target of specified channel		*/
+#define VTFT_FILTERTARGET	0x10000003
+
+#define Z1			0x05		/* Filter delay memory 1 register			*/
+
+#define Z2			0x04		/* Filter delay memory 2 register			*/
+
+#define PSST			0x06		/* Send C amount and loop start address register	*/
+#define PSST_FXSENDAMOUNT_C_MASK 0xff000000	/* Linear level of channel output sent to FX send bus C	*/
+
+#define PSST_FXSENDAMOUNT_C	0x08180006
+
+#define PSST_LOOPSTARTADDR_MASK	0x00ffffff	/* Loop start address of the specified channel		*/
+#define PSST_LOOPSTARTADDR	0x18000006
+
+#define DSL			0x07		/* Send D amount and loop start address register	*/
+#define DSL_FXSENDAMOUNT_D_MASK	0xff000000	/* Linear level of channel output sent to FX send bus D	*/
+
+#define DSL_FXSENDAMOUNT_D	0x08180007
+
+#define DSL_LOOPENDADDR_MASK	0x00ffffff	/* Loop end address of the specified channel		*/
+#define DSL_LOOPENDADDR		0x18000007
+
+#define CCCA			0x08		/* Filter Q, interp. ROM, byte size, cur. addr register */
+#define CCCA_RESONANCE		0xf0000000	/* Lowpass filter resonance (Q) height			*/
+#define CCCA_INTERPROMMASK	0x0e000000	/* Selects passband of interpolation ROM		*/
+						/* 1 == full band, 7 == lowpass				*/
+						/* ROM 0 is used when pitch shifting downward or less	*/
+						/* then 3 semitones upward.  Increasingly higher ROM	*/
+						/* numbers are used, typically in steps of 3 semitones,	*/
+						/* as upward pitch shifting is performed.		*/
+#define CCCA_INTERPROM_0	0x00000000	/* Select interpolation ROM 0				*/
+#define CCCA_INTERPROM_1	0x02000000	/* Select interpolation ROM 1				*/
+#define CCCA_INTERPROM_2	0x04000000	/* Select interpolation ROM 2				*/
+#define CCCA_INTERPROM_3	0x06000000	/* Select interpolation ROM 3				*/
+#define CCCA_INTERPROM_4	0x08000000	/* Select interpolation ROM 4				*/
+#define CCCA_INTERPROM_5	0x0a000000	/* Select interpolation ROM 5				*/
+#define CCCA_INTERPROM_6	0x0c000000	/* Select interpolation ROM 6				*/
+#define CCCA_INTERPROM_7	0x0e000000	/* Select interpolation ROM 7				*/
+#define CCCA_8BITSELECT		0x01000000	/* 1 = Sound memory for this channel uses 8-bit samples	*/
+#define CCCA_CURRADDR_MASK	0x00ffffff	/* Current address of the selected channel		*/
+#define CCCA_CURRADDR		0x18000008
+
+/* undefine CCR to avoid conflict with the definition for SH */
+#undef CCR
+#define CCR			0x09		/* Cache control register				*/
+#define CCR_CACHEINVALIDSIZE	0x07190009
+#define CCR_CACHEINVALIDSIZE_MASK	0xfe000000	/* Number of invalid samples cache for this channel    	*/
+#define CCR_CACHELOOPFLAG	0x01000000	/* 1 = Cache has a loop service pending			*/
+#define CCR_INTERLEAVEDSAMPLES	0x00800000	/* 1 = A cache service will fetch interleaved samples	*/
+#define CCR_WORDSIZEDSAMPLES	0x00400000	/* 1 = A cache service will fetch word sized samples	*/
+#define CCR_READADDRESS		0x06100009
+#define CCR_READADDRESS_MASK	0x003f0000	/* Location of cache just beyond current cache service	*/
+#define CCR_LOOPINVALSIZE	0x0000fe00	/* Number of invalid samples in cache prior to loop	*/
+						/* NOTE: This is valid only if CACHELOOPFLAG is set	*/
+#define CCR_LOOPFLAG		0x00000100	/* Set for a single sample period when a loop occurs	*/
+#define CCR_CACHELOOPADDRHI	0x000000ff	/* DSL_LOOPSTARTADDR's hi byte if CACHELOOPFLAG is set	*/
+
+#define CLP			0x0a		/* Cache loop register (valid if CCR_CACHELOOPFLAG = 1) */
+						/* NOTE: This register is normally not used		*/
+#define CLP_CACHELOOPADDR	0x0000ffff	/* Cache loop address (DSL_LOOPSTARTADDR [0..15])	*/
+
+#define FXRT			0x0b		/* Effects send routing register			*/
+						/* NOTE: It is illegal to assign the same routing to	*/
+						/* two effects sends.					*/
+#define FXRT_CHANNELA		0x000f0000	/* Effects send bus number for channel's effects send A	*/
+#define FXRT_CHANNELB		0x00f00000	/* Effects send bus number for channel's effects send B	*/
+#define FXRT_CHANNELC		0x0f000000	/* Effects send bus number for channel's effects send C	*/
+#define FXRT_CHANNELD		0xf0000000	/* Effects send bus number for channel's effects send D	*/
+
+#define A_HR			0x0b	/* High Resolution. 24bit playback from host to DSP. */
+#define MAPA			0x0c		/* Cache map A						*/
+
+#define MAPB			0x0d		/* Cache map B						*/
+
+#define MAP_PTE_MASK		0xffffe000	/* The 19 MSBs of the PTE indexed by the PTI		*/
+#define MAP_PTI_MASK		0x00001fff	/* The 13 bit index to one of the 8192 PTE dwords      	*/
+
+/* 0x0e, 0x0f: Not used */
+
+#define ENVVOL			0x10		/* Volume envelope register				*/
+#define ENVVOL_MASK		0x0000ffff	/* Current value of volume envelope state variable	*/  
+						/* 0x8000-n == 666*n usec delay	       			*/
+
+#define ATKHLDV 		0x11		/* Volume envelope hold and attack register		*/
+#define ATKHLDV_PHASE0		0x00008000	/* 0 = Begin attack phase				*/
+#define ATKHLDV_HOLDTIME_MASK	0x00007f00	/* Envelope hold time (127-n == n*88.2msec)		*/
+#define ATKHLDV_ATTACKTIME_MASK	0x0000007f	/* Envelope attack time, log encoded			*/
+						/* 0 = infinite, 1 = 10.9msec, ... 0x7f = 5.5msec	*/
+
+#define DCYSUSV 		0x12		/* Volume envelope sustain and decay register		*/
+#define DCYSUSV_PHASE1_MASK	0x00008000	/* 0 = Begin attack phase, 1 = begin release phase	*/
+#define DCYSUSV_SUSTAINLEVEL_MASK 0x00007f00	/* 127 = full, 0 = off, 0.75dB increments		*/
+#define DCYSUSV_CHANNELENABLE_MASK 0x00000080	/* 1 = Inhibit envelope engine from writing values in	*/
+						/* this channel and from writing to pitch, filter and	*/
+						/* volume targets.					*/
+#define DCYSUSV_DECAYTIME_MASK	0x0000007f	/* Volume envelope decay time, log encoded     		*/
+						/* 0 = 43.7msec, 1 = 21.8msec, 0x7f = 22msec		*/
+
+#define LFOVAL1 		0x13		/* Modulation LFO value					*/
+#define LFOVAL_MASK		0x0000ffff	/* Current value of modulation LFO state variable	*/
+						/* 0x8000-n == 666*n usec delay				*/
+
+#define ENVVAL			0x14		/* Modulation envelope register				*/
+#define ENVVAL_MASK		0x0000ffff	/* Current value of modulation envelope state variable 	*/
+						/* 0x8000-n == 666*n usec delay				*/
+
+#define ATKHLDM			0x15		/* Modulation envelope hold and attack register		*/
+#define ATKHLDM_PHASE0		0x00008000	/* 0 = Begin attack phase				*/
+#define ATKHLDM_HOLDTIME	0x00007f00	/* Envelope hold time (127-n == n*42msec)		*/
+#define ATKHLDM_ATTACKTIME	0x0000007f	/* Envelope attack time, log encoded			*/
+						/* 0 = infinite, 1 = 11msec, ... 0x7f = 5.5msec		*/
+
+#define DCYSUSM			0x16		/* Modulation envelope decay and sustain register	*/
+#define DCYSUSM_PHASE1_MASK	0x00008000	/* 0 = Begin attack phase, 1 = begin release phase	*/
+#define DCYSUSM_SUSTAINLEVEL_MASK 0x00007f00	/* 127 = full, 0 = off, 0.75dB increments		*/
+#define DCYSUSM_DECAYTIME_MASK	0x0000007f	/* Envelope decay time, log encoded			*/
+						/* 0 = 43.7msec, 1 = 21.8msec, 0x7f = 22msec		*/
+
+#define LFOVAL2 		0x17		/* Vibrato LFO register					*/
+#define LFOVAL2_MASK		0x0000ffff	/* Current value of vibrato LFO state variable 		*/
+						/* 0x8000-n == 666*n usec delay				*/
+
+#define IP			0x18		/* Initial pitch register				*/
+#define IP_MASK			0x0000ffff	/* Exponential initial pitch shift			*/
+						/* 4 bits of octave, 12 bits of fractional octave	*/
+#define IP_UNITY		0x0000e000	/* Unity pitch shift					*/
+
+#define IFATN			0x19		/* Initial filter cutoff and attenuation register	*/
+#define IFATN_FILTERCUTOFF_MASK	0x0000ff00	/* Initial filter cutoff frequency in exponential units	*/
+						/* 6 most significant bits are semitones		*/
+						/* 2 least significant bits are fractions		*/
+#define IFATN_FILTERCUTOFF	0x08080019
+#define IFATN_ATTENUATION_MASK	0x000000ff	/* Initial attenuation in 0.375dB steps			*/
+#define IFATN_ATTENUATION	0x08000019
+
+
+#define PEFE			0x1a		/* Pitch envelope and filter envelope amount register	*/
+#define PEFE_PITCHAMOUNT_MASK	0x0000ff00	/* Pitch envlope amount					*/
+						/* Signed 2's complement, +/- one octave peak extremes	*/
+#define PEFE_PITCHAMOUNT	0x0808001a
+#define PEFE_FILTERAMOUNT_MASK	0x000000ff	/* Filter envlope amount				*/
+						/* Signed 2's complement, +/- six octaves peak extremes */
+#define PEFE_FILTERAMOUNT	0x0800001a
+#define FMMOD			0x1b		/* Vibrato/filter modulation from LFO register		*/
+#define FMMOD_MODVIBRATO	0x0000ff00	/* Vibrato LFO modulation depth				*/
+						/* Signed 2's complement, +/- one octave extremes	*/
+#define FMMOD_MOFILTER		0x000000ff	/* Filter LFO modulation depth				*/
+						/* Signed 2's complement, +/- three octave extremes	*/
+
+
+#define TREMFRQ 		0x1c		/* Tremolo amount and modulation LFO frequency register	*/
+#define TREMFRQ_DEPTH		0x0000ff00	/* Tremolo depth					*/
+						/* Signed 2's complement, with +/- 12dB extremes	*/
+
+#define TREMFRQ_FREQUENCY	0x000000ff	/* Tremolo LFO frequency				*/
+						/* ??Hz steps, maximum of ?? Hz.			*/
+#define FM2FRQ2 		0x1d		/* Vibrato amount and vibrato LFO frequency register	*/
+#define FM2FRQ2_DEPTH		0x0000ff00	/* Vibrato LFO vibrato depth				*/
+						/* Signed 2's complement, +/- one octave extremes	*/
+#define FM2FRQ2_FREQUENCY	0x000000ff	/* Vibrato LFO frequency				*/
+						/* 0.039Hz steps, maximum of 9.85 Hz.			*/
+
+#define TEMPENV 		0x1e		/* Tempory envelope register				*/
+#define TEMPENV_MASK		0x0000ffff	/* 16-bit value						*/
+						/* NOTE: All channels contain internal variables; do	*/
+						/* not write to these locations.			*/
+
+/* 0x1f: not used */
+
+#define CD0			0x20		/* Cache data 0 register				*/
+#define CD1			0x21		/* Cache data 1 register				*/
+#define CD2			0x22		/* Cache data 2 register				*/
+#define CD3			0x23		/* Cache data 3 register				*/
+#define CD4			0x24		/* Cache data 4 register				*/
+#define CD5			0x25		/* Cache data 5 register				*/
+#define CD6			0x26		/* Cache data 6 register				*/
+#define CD7			0x27		/* Cache data 7 register				*/
+#define CD8			0x28		/* Cache data 8 register				*/
+#define CD9			0x29		/* Cache data 9 register				*/
+#define CDA			0x2a		/* Cache data A register				*/
+#define CDB			0x2b		/* Cache data B register				*/
+#define CDC			0x2c		/* Cache data C register				*/
+#define CDD			0x2d		/* Cache data D register				*/
+#define CDE			0x2e		/* Cache data E register				*/
+#define CDF			0x2f		/* Cache data F register				*/
+
+/* 0x30-3f seem to be the same as 0x20-2f */
+
+#define PTB			0x40		/* Page table base register				*/
+#define PTB_MASK		0xfffff000	/* Physical address of the page table in host memory	*/
+
+#define TCB			0x41		/* Tank cache base register    				*/
+#define TCB_MASK		0xfffff000	/* Physical address of the bottom of host based TRAM	*/
+
+#define ADCCR			0x42		/* ADC sample rate/stereo control register		*/
+#define ADCCR_RCHANENABLE	0x00000010	/* Enables right channel for writing to the host       	*/
+#define ADCCR_LCHANENABLE	0x00000008	/* Enables left channel for writing to the host		*/
+						/* NOTE: To guarantee phase coherency, both channels	*/
+						/* must be disabled prior to enabling both channels.	*/
+#define A_ADCCR_RCHANENABLE	0x00000020
+#define A_ADCCR_LCHANENABLE	0x00000010
+
+#define A_ADCCR_SAMPLERATE_MASK 0x0000000F      /* Audigy sample rate convertor output rate		*/
+#define ADCCR_SAMPLERATE_MASK	0x00000007	/* Sample rate convertor output rate			*/
+#define ADCCR_SAMPLERATE_48	0x00000000	/* 48kHz sample rate					*/
+#define ADCCR_SAMPLERATE_44	0x00000001	/* 44.1kHz sample rate					*/
+#define ADCCR_SAMPLERATE_32	0x00000002	/* 32kHz sample rate					*/
+#define ADCCR_SAMPLERATE_24	0x00000003	/* 24kHz sample rate					*/
+#define ADCCR_SAMPLERATE_22	0x00000004	/* 22.05kHz sample rate					*/
+#define ADCCR_SAMPLERATE_16	0x00000005	/* 16kHz sample rate					*/
+#define ADCCR_SAMPLERATE_11	0x00000006	/* 11.025kHz sample rate				*/
+#define ADCCR_SAMPLERATE_8	0x00000007	/* 8kHz sample rate					*/
+#define A_ADCCR_SAMPLERATE_12	0x00000006	/* 12kHz sample rate					*/
+#define A_ADCCR_SAMPLERATE_11	0x00000007	/* 11.025kHz sample rate				*/
+#define A_ADCCR_SAMPLERATE_8	0x00000008	/* 8kHz sample rate					*/
+
+#define FXWC			0x43		/* FX output write channels register			*/
+						/* When set, each bit enables the writing of the	*/
+						/* corresponding FX output channel (internal registers  */
+						/* 0x20-0x3f) to host memory.  This mode of recording   */
+						/* is 16bit, 48KHz only. All 32 channels can be enabled */
+						/* simultaneously.					*/
+
+#define FXWC_DEFAULTROUTE_C     (1<<0)		/* left emu out? */
+#define FXWC_DEFAULTROUTE_B     (1<<1)		/* right emu out? */
+#define FXWC_DEFAULTROUTE_A     (1<<12)
+#define FXWC_DEFAULTROUTE_D     (1<<13)
+#define FXWC_ADCLEFT            (1<<18)
+#define FXWC_CDROMSPDIFLEFT     (1<<18)
+#define FXWC_ADCRIGHT           (1<<19)
+#define FXWC_CDROMSPDIFRIGHT    (1<<19)
+#define FXWC_MIC                (1<<20)
+#define FXWC_ZOOMLEFT           (1<<20)
+#define FXWC_ZOOMRIGHT          (1<<21)
+#define FXWC_SPDIFLEFT          (1<<22)		/* 0x00400000 */
+#define FXWC_SPDIFRIGHT         (1<<23)		/* 0x00800000 */
+
+#define A_TBLSZ			0x43	/* Effects Tank Internal Table Size. Only low byte or register used */
+
+#define TCBS			0x44		/* Tank cache buffer size register			*/
+#define TCBS_MASK		0x00000007	/* Tank cache buffer size field				*/
+#define TCBS_BUFFSIZE_16K	0x00000000
+#define TCBS_BUFFSIZE_32K	0x00000001
+#define TCBS_BUFFSIZE_64K	0x00000002
+#define TCBS_BUFFSIZE_128K	0x00000003
+#define TCBS_BUFFSIZE_256K	0x00000004
+#define TCBS_BUFFSIZE_512K	0x00000005
+#define TCBS_BUFFSIZE_1024K	0x00000006
+#define TCBS_BUFFSIZE_2048K	0x00000007
+
+#define MICBA			0x45		/* AC97 microphone buffer address register		*/
+#define MICBA_MASK		0xfffff000	/* 20 bit base address					*/
+
+#define ADCBA			0x46		/* ADC buffer address register				*/
+#define ADCBA_MASK		0xfffff000	/* 20 bit base address					*/
+
+#define FXBA			0x47		/* FX Buffer Address */
+#define FXBA_MASK		0xfffff000	/* 20 bit base address					*/
+
+#define A_HWM			0x48	/* High PCI Water Mark - word access, defaults to 3f */
+
+#define MICBS			0x49		/* Microphone buffer size register			*/
+
+#define ADCBS			0x4a		/* ADC buffer size register				*/
+
+#define FXBS			0x4b		/* FX buffer size register				*/
+
+/* register: 0x4c..4f: ffff-ffff current amounts, per-channel */
+
+/* The following mask values define the size of the ADC, MIX and FX buffers in bytes */
+#define ADCBS_BUFSIZE_NONE	0x00000000
+#define ADCBS_BUFSIZE_384	0x00000001
+#define ADCBS_BUFSIZE_448	0x00000002
+#define ADCBS_BUFSIZE_512	0x00000003
+#define ADCBS_BUFSIZE_640	0x00000004
+#define ADCBS_BUFSIZE_768	0x00000005
+#define ADCBS_BUFSIZE_896	0x00000006
+#define ADCBS_BUFSIZE_1024	0x00000007
+#define ADCBS_BUFSIZE_1280	0x00000008
+#define ADCBS_BUFSIZE_1536	0x00000009
+#define ADCBS_BUFSIZE_1792	0x0000000a
+#define ADCBS_BUFSIZE_2048	0x0000000b
+#define ADCBS_BUFSIZE_2560	0x0000000c
+#define ADCBS_BUFSIZE_3072	0x0000000d
+#define ADCBS_BUFSIZE_3584	0x0000000e
+#define ADCBS_BUFSIZE_4096	0x0000000f
+#define ADCBS_BUFSIZE_5120	0x00000010
+#define ADCBS_BUFSIZE_6144	0x00000011
+#define ADCBS_BUFSIZE_7168	0x00000012
+#define ADCBS_BUFSIZE_8192	0x00000013
+#define ADCBS_BUFSIZE_10240	0x00000014
+#define ADCBS_BUFSIZE_12288	0x00000015
+#define ADCBS_BUFSIZE_14366	0x00000016
+#define ADCBS_BUFSIZE_16384	0x00000017
+#define ADCBS_BUFSIZE_20480	0x00000018
+#define ADCBS_BUFSIZE_24576	0x00000019
+#define ADCBS_BUFSIZE_28672	0x0000001a
+#define ADCBS_BUFSIZE_32768	0x0000001b
+#define ADCBS_BUFSIZE_40960	0x0000001c
+#define ADCBS_BUFSIZE_49152	0x0000001d
+#define ADCBS_BUFSIZE_57344	0x0000001e
+#define ADCBS_BUFSIZE_65536	0x0000001f
+
+/* Current Send B, A Amounts */
+#define A_CSBA			0x4c
+
+/* Current Send D, C Amounts */
+#define A_CSDC			0x4d
+
+/* Current Send F, E Amounts */
+#define A_CSFE			0x4e
+
+/* Current Send H, G Amounts */
+#define A_CSHG			0x4f
+
+
+#define CDCS			0x50		/* CD-ROM digital channel status register	*/
+
+#define GPSCS			0x51		/* General Purpose SPDIF channel status register*/
+
+#define DBG			0x52		/* DO NOT PROGRAM THIS REGISTER!!! MAY DESTROY CHIP */
+
+/* S/PDIF Input C Channel Status */
+#define A_SPSC			0x52
+
+#define REG53			0x53		/* DO NOT PROGRAM THIS REGISTER!!! MAY DESTROY CHIP */
+
+#define A_DBG			 0x53
+#define A_DBG_SINGLE_STEP	 0x00020000	/* Set to zero to start dsp */
+#define A_DBG_ZC		 0x40000000	/* zero tram counter */
+#define A_DBG_STEP_ADDR		 0x000003ff
+#define A_DBG_SATURATION_OCCURED 0x20000000
+#define A_DBG_SATURATION_ADDR	 0x0ffc0000
+
+// NOTE: 0x54,55,56: 64-bit
+#define SPCS0			0x54		/* SPDIF output Channel Status 0 register	*/
+
+#define SPCS1			0x55		/* SPDIF output Channel Status 1 register	*/
+
+#define SPCS2			0x56		/* SPDIF output Channel Status 2 register	*/
+
+#define SPCS_CLKACCYMASK	0x30000000	/* Clock accuracy				*/
+#define SPCS_CLKACCY_1000PPM	0x00000000	/* 1000 parts per million			*/
+#define SPCS_CLKACCY_50PPM	0x10000000	/* 50 parts per million				*/
+#define SPCS_CLKACCY_VARIABLE	0x20000000	/* Variable accuracy				*/
+#define SPCS_SAMPLERATEMASK	0x0f000000	/* Sample rate					*/
+#define SPCS_SAMPLERATE_44	0x00000000	/* 44.1kHz sample rate				*/
+#define SPCS_SAMPLERATE_48	0x02000000	/* 48kHz sample rate				*/
+#define SPCS_SAMPLERATE_32	0x03000000	/* 32kHz sample rate				*/
+#define SPCS_CHANNELNUMMASK	0x00f00000	/* Channel number				*/
+#define SPCS_CHANNELNUM_UNSPEC	0x00000000	/* Unspecified channel number			*/
+#define SPCS_CHANNELNUM_LEFT	0x00100000	/* Left channel					*/
+#define SPCS_CHANNELNUM_RIGHT	0x00200000	/* Right channel				*/
+#define SPCS_SOURCENUMMASK	0x000f0000	/* Source number				*/
+#define SPCS_SOURCENUM_UNSPEC	0x00000000	/* Unspecified source number			*/
+#define SPCS_GENERATIONSTATUS	0x00008000	/* Originality flag (see IEC-958 spec)		*/
+#define SPCS_CATEGORYCODEMASK	0x00007f00	/* Category code (see IEC-958 spec)		*/
+#define SPCS_MODEMASK		0x000000c0	/* Mode (see IEC-958 spec)			*/
+#define SPCS_EMPHASISMASK	0x00000038	/* Emphasis					*/
+#define SPCS_EMPHASIS_NONE	0x00000000	/* No emphasis					*/
+#define SPCS_EMPHASIS_50_15	0x00000008	/* 50/15 usec 2 channel				*/
+#define SPCS_COPYRIGHT		0x00000004	/* Copyright asserted flag -- do not modify	*/
+#define SPCS_NOTAUDIODATA	0x00000002	/* 0 = Digital audio, 1 = not audio		*/
+#define SPCS_PROFESSIONAL	0x00000001	/* 0 = Consumer (IEC-958), 1 = pro (AES3-1992)	*/
+
+/* 0x57: Not used */
+
+/* The 32-bit CLIx and SOLx registers all have one bit per channel control/status      		*/
+#define CLIEL			0x58		/* Channel loop interrupt enable low register	*/
+
+#define CLIEH			0x59		/* Channel loop interrupt enable high register	*/
+
+#define CLIPL			0x5a		/* Channel loop interrupt pending low register	*/
+
+#define CLIPH			0x5b		/* Channel loop interrupt pending high register	*/
+
+#define SOLEL			0x5c		/* Stop on loop enable low register		*/
+
+#define SOLEH			0x5d		/* Stop on loop enable high register		*/
+
+#define SPBYPASS		0x5e		/* SPDIF BYPASS mode register			*/
+#define SPBYPASS_SPDIF0_MASK	0x00000003	/* SPDIF 0 bypass mode				*/
+#define SPBYPASS_SPDIF1_MASK	0x0000000c	/* SPDIF 1 bypass mode				*/
+/* bypass mode: 0 - DSP; 1 - SPDIF A, 2 - SPDIF B, 3 - SPDIF C					*/
+#define SPBYPASS_FORMAT		0x00000f00      /* If 1, SPDIF XX uses 24 bit, if 0 - 20 bit	*/
+
+#define AC97SLOT		0x5f            /* additional AC97 slots enable bits		*/
+#define AC97SLOT_REAR_RIGHT	0x01		/* Rear left */
+#define AC97SLOT_REAR_LEFT	0x02		/* Rear right */
+#define AC97SLOT_CNTR		0x10            /* Center enable */
+#define AC97SLOT_LFE		0x20            /* LFE enable */
+
+/* PCB Revision */
+#define A_PCB			0x5f
+
+// NOTE: 0x60,61,62: 64-bit
+#define CDSRCS			0x60		/* CD-ROM Sample Rate Converter status register	*/
+
+#define GPSRCS			0x61		/* General Purpose SPDIF sample rate cvt status */
+
+#define ZVSRCS			0x62		/* ZVideo sample rate converter status		*/
+						/* NOTE: This one has no SPDIFLOCKED field	*/
+						/* Assumes sample lock				*/
+
+/* These three bitfields apply to CDSRCS, GPSRCS, and (except as noted) ZVSRCS.			*/
+#define SRCS_SPDIFVALID		0x04000000	/* SPDIF stream valid				*/
+#define SRCS_SPDIFLOCKED	0x02000000	/* SPDIF stream locked				*/
+#define SRCS_RATELOCKED		0x01000000	/* Sample rate locked				*/
+#define SRCS_ESTSAMPLERATE	0x0007ffff	/* Do not modify this field.			*/
+
+/* Note that these values can vary +/- by a small amount                                        */
+#define SRCS_SPDIFRATE_44	0x0003acd9
+#define SRCS_SPDIFRATE_48	0x00040000
+#define SRCS_SPDIFRATE_96	0x00080000
+
+#define MICIDX                  0x63            /* Microphone recording buffer index register   */
+#define MICIDX_MASK             0x0000ffff      /* 16-bit value                                 */
+#define MICIDX_IDX		0x10000063
+
+#define ADCIDX			0x64		/* ADC recording buffer index register		*/
+#define ADCIDX_MASK		0x0000ffff	/* 16 bit index field				*/
+#define ADCIDX_IDX		0x10000064
+
+#define A_ADCIDX		0x63
+#define A_ADCIDX_IDX		0x10000063
+
+#define A_MICIDX		0x64
+#define A_MICIDX_IDX		0x10000064
+
+#define FXIDX			0x65		/* FX recording buffer index register		*/
+#define FXIDX_MASK		0x0000ffff	/* 16-bit value					*/
+#define FXIDX_IDX		0x10000065
+
+/* The 32-bit HLIx and HLIPx registers all have one bit per channel control/status      		*/
+#define HLIEL			0x66		/* Channel half loop interrupt enable low register	*/
+
+#define HLIEH			0x67		/* Channel half loop interrupt enable high register	*/
+
+#define HLIPL			0x68		/* Channel half loop interrupt pending low register	*/
+
+#define HLIPH			0x69		/* Channel half loop interrupt pending high register	*/
+
+/* S/PDIF Host Record Index (bypasses SRC) */
+#define A_SPRI			0x6a
+/* S/PDIF Host Record Address */
+#define A_SPRA			0x6b
+/* S/PDIF Host Record Control */
+#define A_SPRC			0x6c
+/* Delayed Interrupt Counter & Enable */
+#define A_DICE			0x6d
+/* Tank Table Base */
+#define A_TTB			0x6e
+/* Tank Delay Offset */
+#define A_TDOF			0x6f
+
+/* This is the MPU port on the card (via the game port)						*/
+#define A_MUDATA1		0x70
+#define A_MUCMD1		0x71
+#define A_MUSTAT1		A_MUCMD1
+
+/* This is the MPU port on the Audigy Drive 							*/
+#define A_MUDATA2		0x72
+#define A_MUCMD2		0x73
+#define A_MUSTAT2		A_MUCMD2	
+
+/* The next two are the Audigy equivalent of FXWC						*/
+/* the Audigy can record any output (16bit, 48kHz, up to 64 channel simultaneously) 		*/
+/* Each bit selects a channel for recording */
+#define A_FXWC1			0x74            /* Selects 0x7f-0x60 for FX recording           */
+#define A_FXWC2			0x75		/* Selects 0x9f-0x80 for FX recording           */
+
+/* Extended Hardware Control */
+#define A_SPDIF_SAMPLERATE	0x76		/* Set the sample rate of SPDIF output		*/
+#define A_SAMPLE_RATE		0x76		/* Various sample rate settings. */
+#define A_SAMPLE_RATE_NOT_USED  0x0ffc111e	/* Bits that are not used and cannot be set. 	*/
+#define A_SAMPLE_RATE_UNKNOWN	0xf0030001	/* Bits that can be set, but have unknown use. 	*/
+#define A_SPDIF_RATE_MASK	0x000000e0	/* Any other values for rates, just use 48000	*/
+#define A_SPDIF_48000		0x00000000
+#define A_SPDIF_192000		0x00000020
+#define A_SPDIF_96000		0x00000040
+#define A_SPDIF_44100		0x00000080
+
+#define A_I2S_CAPTURE_RATE_MASK	0x00000e00	/* This sets the capture PCM rate, but it is    */
+#define A_I2S_CAPTURE_48000	0x00000000	/* unclear if this sets the ADC rate as well.	*/
+#define A_I2S_CAPTURE_192000	0x00000200
+#define A_I2S_CAPTURE_96000	0x00000400
+#define A_I2S_CAPTURE_44100	0x00000800
+
+#define A_PCM_RATE_MASK		0x0000e000	/* This sets the playback PCM rate on the P16V	*/
+#define A_PCM_48000		0x00000000
+#define A_PCM_192000		0x00002000
+#define A_PCM_96000		0x00004000
+#define A_PCM_44100		0x00008000
+
+/* I2S0 Sample Rate Tracker Status */
+#define A_SRT3			0x77
+
+/* I2S1 Sample Rate Tracker Status */
+#define A_SRT4			0x78
+
+/* I2S2 Sample Rate Tracker Status */
+#define A_SRT5			0x79
+/* - default to 0x01080000 on my audigy 2 ZS --rlrevell	*/
+
+/* Tank Table DMA Address */
+#define A_TTDA			0x7a
+/* Tank Table DMA Data */
+#define A_TTDD			0x7b
+
+#define A_FXRT2			0x7c
+#define A_FXRT_CHANNELE		0x0000003f	/* Effects send bus number for channel's effects send E	*/
+#define A_FXRT_CHANNELF		0x00003f00	/* Effects send bus number for channel's effects send F	*/
+#define A_FXRT_CHANNELG		0x003f0000	/* Effects send bus number for channel's effects send G	*/
+#define A_FXRT_CHANNELH		0x3f000000	/* Effects send bus number for channel's effects send H	*/
+
+#define A_SENDAMOUNTS		0x7d
+#define A_FXSENDAMOUNT_E_MASK	0xFF000000
+#define A_FXSENDAMOUNT_F_MASK	0x00FF0000
+#define A_FXSENDAMOUNT_G_MASK	0x0000FF00
+#define A_FXSENDAMOUNT_H_MASK	0x000000FF
+/* 0x7c, 0x7e "high bit is used for filtering" */
+ 
+/* The send amounts for this one are the same as used with the emu10k1 */
+#define A_FXRT1			0x7e
+#define A_FXRT_CHANNELA		0x0000003f
+#define A_FXRT_CHANNELB		0x00003f00
+#define A_FXRT_CHANNELC		0x003f0000
+#define A_FXRT_CHANNELD		0x3f000000
+
+/* 0x7f: Not used */
+/* Each FX general purpose register is 32 bits in length, all bits are used			*/
+#define FXGPREGBASE		0x100		/* FX general purpose registers base       	*/
+#define A_FXGPREGBASE		0x400		/* Audigy GPRs, 0x400 to 0x5ff			*/
+
+#define A_TANKMEMCTLREGBASE	0x100		/* Tank memory control registers base - only for Audigy */
+#define A_TANKMEMCTLREG_MASK	0x1f		/* only 5 bits used - only for Audigy */
+
+/* Tank audio data is logarithmically compressed down to 16 bits before writing to TRAM and is	*/
+/* decompressed back to 20 bits on a read.  There are a total of 160 locations, the last 32	*/
+/* locations are for external TRAM. 								*/
+#define TANKMEMDATAREGBASE	0x200		/* Tank memory data registers base     		*/
+#define TANKMEMDATAREG_MASK	0x000fffff	/* 20 bit tank audio data field			*/
+
+/* Combined address field and memory opcode or flag field.  160 locations, last 32 are external	*/
+#define TANKMEMADDRREGBASE	0x300		/* Tank memory address registers base		*/
+#define TANKMEMADDRREG_ADDR_MASK 0x000fffff	/* 20 bit tank address field			*/
+#define TANKMEMADDRREG_CLEAR	0x00800000	/* Clear tank memory				*/
+#define TANKMEMADDRREG_ALIGN	0x00400000	/* Align read or write relative to tank access	*/
+#define TANKMEMADDRREG_WRITE	0x00200000	/* Write to tank memory				*/
+#define TANKMEMADDRREG_READ	0x00100000	/* Read from tank memory			*/
+
+#define MICROCODEBASE		0x400		/* Microcode data base address			*/
+
+/* Each DSP microcode instruction is mapped into 2 doublewords 					*/
+/* NOTE: When writing, always write the LO doubleword first.  Reads can be in either order.	*/
+#define LOWORD_OPX_MASK		0x000ffc00	/* Instruction operand X			*/
+#define LOWORD_OPY_MASK		0x000003ff	/* Instruction operand Y			*/
+#define HIWORD_OPCODE_MASK	0x00f00000	/* Instruction opcode				*/
+#define HIWORD_RESULT_MASK	0x000ffc00	/* Instruction result				*/
+#define HIWORD_OPA_MASK		0x000003ff	/* Instruction operand A			*/
+
+
+/* Audigy Soundcard have a different instruction format */
+#define A_MICROCODEBASE		0x600
+#define A_LOWORD_OPY_MASK	0x000007ff
+#define A_LOWORD_OPX_MASK	0x007ff000
+#define A_HIWORD_OPCODE_MASK	0x0f000000
+#define A_HIWORD_RESULT_MASK	0x007ff000
+#define A_HIWORD_OPA_MASK	0x000007ff
+
+/************************************************************************************************/
+/* EMU1010m HANA FPGA registers									*/
+/************************************************************************************************/
+#define EMU_HANA_DESTHI		0x00	/* 0000xxx  3 bits Link Destination */
+#define EMU_HANA_DESTLO		0x01	/* 00xxxxx  5 bits */
+#define EMU_HANA_SRCHI		0x02	/* 0000xxx  3 bits Link Source */
+#define EMU_HANA_SRCLO		0x03	/* 00xxxxx  5 bits */
+#define EMU_HANA_DOCK_PWR	0x04	/* 000000x  1 bits Audio Dock power */
+#define EMU_HANA_DOCK_PWR_ON		0x01 /* Audio Dock power on */
+#define EMU_HANA_WCLOCK		0x05	/* 0000xxx  3 bits Word Clock source select  */
+					/* Must be written after power on to reset DLL */
+					/* One is unable to detect the Audio dock without this */
+#define EMU_HANA_WCLOCK_SRC_MASK	0x07
+#define EMU_HANA_WCLOCK_INT_48K		0x00
+#define EMU_HANA_WCLOCK_INT_44_1K	0x01
+#define EMU_HANA_WCLOCK_HANA_SPDIF_IN	0x02
+#define EMU_HANA_WCLOCK_HANA_ADAT_IN	0x03
+#define EMU_HANA_WCLOCK_SYNC_BNCN	0x04
+#define EMU_HANA_WCLOCK_2ND_HANA	0x05
+#define EMU_HANA_WCLOCK_SRC_RESERVED	0x06
+#define EMU_HANA_WCLOCK_OFF		0x07 /* For testing, forces fallback to DEFCLOCK */
+#define EMU_HANA_WCLOCK_MULT_MASK	0x18
+#define EMU_HANA_WCLOCK_1X		0x00
+#define EMU_HANA_WCLOCK_2X		0x08
+#define EMU_HANA_WCLOCK_4X		0x10
+#define EMU_HANA_WCLOCK_MULT_RESERVED	0x18
+
+#define EMU_HANA_DEFCLOCK	0x06	/* 000000x  1 bits Default Word Clock  */
+#define EMU_HANA_DEFCLOCK_48K		0x00
+#define EMU_HANA_DEFCLOCK_44_1K		0x01
+
+#define EMU_HANA_UNMUTE		0x07	/* 000000x  1 bits Mute all audio outputs  */
+#define EMU_MUTE			0x00
+#define EMU_UNMUTE			0x01
+
+#define EMU_HANA_FPGA_CONFIG	0x08	/* 00000xx  2 bits Config control of FPGAs  */
+#define EMU_HANA_FPGA_CONFIG_AUDIODOCK	0x01 /* Set in order to program FPGA on Audio Dock */
+#define EMU_HANA_FPGA_CONFIG_HANA	0x02 /* Set in order to program FPGA on Hana */
+
+#define EMU_HANA_IRQ_ENABLE	0x09	/* 000xxxx  4 bits IRQ Enable  */
+#define EMU_HANA_IRQ_WCLK_CHANGED	0x01
+#define EMU_HANA_IRQ_ADAT		0x02
+#define EMU_HANA_IRQ_DOCK		0x04
+#define EMU_HANA_IRQ_DOCK_LOST		0x08
+
+#define EMU_HANA_SPDIF_MODE	0x0a	/* 00xxxxx  5 bits SPDIF MODE  */
+#define EMU_HANA_SPDIF_MODE_TX_COMSUMER	0x00
+#define EMU_HANA_SPDIF_MODE_TX_PRO	0x01
+#define EMU_HANA_SPDIF_MODE_TX_NOCOPY	0x02
+#define EMU_HANA_SPDIF_MODE_RX_COMSUMER	0x00
+#define EMU_HANA_SPDIF_MODE_RX_PRO	0x04
+#define EMU_HANA_SPDIF_MODE_RX_NOCOPY	0x08
+#define EMU_HANA_SPDIF_MODE_RX_INVALID	0x10
+
+#define EMU_HANA_OPTICAL_TYPE	0x0b	/* 00000xx  2 bits ADAT or SPDIF in/out  */
+#define EMU_HANA_OPTICAL_IN_SPDIF	0x00
+#define EMU_HANA_OPTICAL_IN_ADAT	0x01
+#define EMU_HANA_OPTICAL_OUT_SPDIF	0x00
+#define EMU_HANA_OPTICAL_OUT_ADAT	0x02
+
+#define EMU_HANA_MIDI_IN		0x0c	/* 000000x  1 bit  Control MIDI  */
+#define EMU_HANA_MIDI_IN_FROM_HAMOA	0x00 /* HAMOA MIDI in to Alice 2 MIDI B */
+#define EMU_HANA_MIDI_IN_FROM_DOCK	0x01 /* Audio Dock MIDI in to Alice 2 MIDI B */
+
+#define EMU_HANA_DOCK_LEDS_1	0x0d	/* 000xxxx  4 bit  Audio Dock LEDs  */
+#define EMU_HANA_DOCK_LEDS_1_MIDI1	0x01	/* MIDI 1 LED on */
+#define EMU_HANA_DOCK_LEDS_1_MIDI2	0x02	/* MIDI 2 LED on */
+#define EMU_HANA_DOCK_LEDS_1_SMPTE_IN	0x04	/* SMPTE IN LED on */
+#define EMU_HANA_DOCK_LEDS_1_SMPTE_OUT	0x08	/* SMPTE OUT LED on */
+
+#define EMU_HANA_DOCK_LEDS_2	0x0e	/* 0xxxxxx  6 bit  Audio Dock LEDs  */
+#define EMU_HANA_DOCK_LEDS_2_44K	0x01	/* 44.1 kHz LED on */
+#define EMU_HANA_DOCK_LEDS_2_48K	0x02	/* 48 kHz LED on */
+#define EMU_HANA_DOCK_LEDS_2_96K	0x04	/* 96 kHz LED on */
+#define EMU_HANA_DOCK_LEDS_2_192K	0x08	/* 192 kHz LED on */
+#define EMU_HANA_DOCK_LEDS_2_LOCK	0x10	/* LOCK LED on */
+#define EMU_HANA_DOCK_LEDS_2_EXT	0x20	/* EXT LED on */
+
+#define EMU_HANA_DOCK_LEDS_3	0x0f	/* 0xxxxxx  6 bit  Audio Dock LEDs  */
+#define EMU_HANA_DOCK_LEDS_3_CLIP_A	0x01	/* Mic A Clip LED on */
+#define EMU_HANA_DOCK_LEDS_3_CLIP_B	0x02	/* Mic B Clip LED on */
+#define EMU_HANA_DOCK_LEDS_3_SIGNAL_A	0x04	/* Signal A Clip LED on */
+#define EMU_HANA_DOCK_LEDS_3_SIGNAL_B	0x08	/* Signal B Clip LED on */
+#define EMU_HANA_DOCK_LEDS_3_MANUAL_CLIP	0x10	/* Manual Clip detection */
+#define EMU_HANA_DOCK_LEDS_3_MANUAL_SIGNAL	0x20	/* Manual Signal detection */
+
+#define EMU_HANA_ADC_PADS	0x10	/* 0000xxx  3 bit  Audio Dock ADC 14dB pads */
+#define EMU_HANA_DOCK_ADC_PAD1	0x01	/* 14dB Attenuation on Audio Dock ADC 1 */
+#define EMU_HANA_DOCK_ADC_PAD2	0x02	/* 14dB Attenuation on Audio Dock ADC 2 */
+#define EMU_HANA_DOCK_ADC_PAD3	0x04	/* 14dB Attenuation on Audio Dock ADC 3 */
+#define EMU_HANA_0202_ADC_PAD1	0x08	/* 14dB Attenuation on 0202 ADC 1 */
+
+#define EMU_HANA_DOCK_MISC	0x11	/* 0xxxxxx  6 bit  Audio Dock misc bits */
+#define EMU_HANA_DOCK_DAC1_MUTE	0x01	/* DAC 1 Mute */
+#define EMU_HANA_DOCK_DAC2_MUTE	0x02	/* DAC 2 Mute */
+#define EMU_HANA_DOCK_DAC3_MUTE	0x04	/* DAC 3 Mute */
+#define EMU_HANA_DOCK_DAC4_MUTE	0x08	/* DAC 4 Mute */
+#define EMU_HANA_DOCK_PHONES_192_DAC1	0x00	/* DAC 1 Headphones source at 192kHz */
+#define EMU_HANA_DOCK_PHONES_192_DAC2	0x10	/* DAC 2 Headphones source at 192kHz */
+#define EMU_HANA_DOCK_PHONES_192_DAC3	0x20	/* DAC 3 Headphones source at 192kHz */
+#define EMU_HANA_DOCK_PHONES_192_DAC4	0x30	/* DAC 4 Headphones source at 192kHz */
+
+#define EMU_HANA_MIDI_OUT	0x12	/* 00xxxxx  5 bit  Source for each MIDI out port */
+#define EMU_HANA_MIDI_OUT_0202	0x01 /* 0202 MIDI from Alice 2. 0 = A, 1 = B */
+#define EMU_HANA_MIDI_OUT_DOCK1	0x02 /* Audio Dock MIDI1 front, from Alice 2. 0 = A, 1 = B */
+#define EMU_HANA_MIDI_OUT_DOCK2	0x04 /* Audio Dock MIDI2 rear, from Alice 2. 0 = A, 1 = B */
+#define EMU_HANA_MIDI_OUT_SYNC2	0x08 /* Sync card. Not the actual MIDI out jack. 0 = A, 1 = B */
+#define EMU_HANA_MIDI_OUT_LOOP	0x10 /* 0 = bits (3:0) normal. 1 = MIDI loopback enabled. */
+
+#define EMU_HANA_DAC_PADS	0x13	/* 00xxxxx  5 bit  DAC 14dB attenuation pads */
+#define EMU_HANA_DOCK_DAC_PAD1	0x01	/* 14dB Attenuation on AudioDock DAC 1. Left and Right */
+#define EMU_HANA_DOCK_DAC_PAD2	0x02	/* 14dB Attenuation on AudioDock DAC 2. Left and Right */
+#define EMU_HANA_DOCK_DAC_PAD3	0x04	/* 14dB Attenuation on AudioDock DAC 3. Left and Right */
+#define EMU_HANA_DOCK_DAC_PAD4	0x08	/* 14dB Attenuation on AudioDock DAC 4. Left and Right */
+#define EMU_HANA_0202_DAC_PAD1	0x10	/* 14dB Attenuation on 0202 DAC 1. Left and Right */
+
+/* 0x14 - 0x1f Unused R/W registers */
+#define EMU_HANA_IRQ_STATUS	0x20	/* 000xxxx  4 bits IRQ Status  */
+#if 0  /* Already defined for reg 0x09 IRQ_ENABLE */
+#define EMU_HANA_IRQ_WCLK_CHANGED	0x01
+#define EMU_HANA_IRQ_ADAT		0x02
+#define EMU_HANA_IRQ_DOCK		0x04
+#define EMU_HANA_IRQ_DOCK_LOST		0x08
+#endif
+
+#define EMU_HANA_OPTION_CARDS	0x21	/* 000xxxx  4 bits Presence of option cards */
+#define EMU_HANA_OPTION_HAMOA	0x01	/* HAMOA card present */
+#define EMU_HANA_OPTION_SYNC	0x02	/* Sync card present */
+#define EMU_HANA_OPTION_DOCK_ONLINE	0x04	/* Audio Dock online and FPGA configured */
+#define EMU_HANA_OPTION_DOCK_OFFLINE	0x08	/* Audio Dock online and FPGA not configured */
+
+#define EMU_HANA_ID		0x22	/* 1010101  7 bits ID byte & 0x7f = 0x55 */
+
+#define EMU_HANA_MAJOR_REV	0x23	/* 0000xxx  3 bit  Hana FPGA Major rev */
+#define EMU_HANA_MINOR_REV	0x24	/* 0000xxx  3 bit  Hana FPGA Minor rev */
+
+#define EMU_DOCK_MAJOR_REV	0x25	/* 0000xxx  3 bit  Audio Dock FPGA Major rev */
+#define EMU_DOCK_MINOR_REV	0x26	/* 0000xxx  3 bit  Audio Dock FPGA Minor rev */
+
+#define EMU_DOCK_BOARD_ID	0x27	/* 00000xx  2 bits Audio Dock ID pins */
+#define EMU_DOCK_BOARD_ID0	0x00	/* ID bit 0 */
+#define EMU_DOCK_BOARD_ID1	0x03	/* ID bit 1 */
+
+#define EMU_HANA_WC_SPDIF_HI	0x28	/* 0xxxxxx  6 bit  SPDIF IN Word clock, upper 6 bits */
+#define EMU_HANA_WC_SPDIF_LO	0x29	/* 0xxxxxx  6 bit  SPDIF IN Word clock, lower 6 bits */
+
+#define EMU_HANA_WC_ADAT_HI	0x2a	/* 0xxxxxx  6 bit  ADAT IN Word clock, upper 6 bits */
+#define EMU_HANA_WC_ADAT_LO	0x2b	/* 0xxxxxx  6 bit  ADAT IN Word clock, lower 6 bits */
+
+#define EMU_HANA_WC_BNC_LO	0x2c	/* 0xxxxxx  6 bit  BNC IN Word clock, lower 6 bits */
+#define EMU_HANA_WC_BNC_HI	0x2d	/* 0xxxxxx  6 bit  BNC IN Word clock, upper 6 bits */
+
+#define EMU_HANA2_WC_SPDIF_HI	0x2e	/* 0xxxxxx  6 bit  HANA2 SPDIF IN Word clock, upper 6 bits */
+#define EMU_HANA2_WC_SPDIF_LO	0x2f	/* 0xxxxxx  6 bit  HANA2 SPDIF IN Word clock, lower 6 bits */
+/* 0x30 - 0x3f Unused Read only registers */
+
+/************************************************************************************************/
+/* EMU1010m HANA Destinations									*/
+/************************************************************************************************/
+/* Hana, original 1010,1212,1820 using Alice2
+ * Destiniations for SRATEX = 1X rates: 44.1 kHz or 48 kHz
+ * 0x00, 0x00-0x0f: 16 EMU32 channels to Alice2
+ * 0x01, 0x10-0x1f: 32 Elink channels to Audio Dock
+ * 0x01, 0x00: Dock DAC 1 Left
+ * 0x01, 0x04: Dock DAC 1 Right
+ * 0x01, 0x08: Dock DAC 2 Left
+ * 0x01, 0x0c: Dock DAC 2 Right
+ * 0x01, 0x10: Dock DAC 3 Left
+ * 0x01, 0x12: PHONES Left
+ * 0x01, 0x14: Dock DAC 3 Right
+ * 0x01, 0x16: PHONES Right
+ * 0x01, 0x18: Dock DAC 4 Left
+ * 0x01, 0x1a: S/PDIF Left
+ * 0x01, 0x1c: Dock DAC 4 Right
+ * 0x01, 0x1e: S/PDIF Right
+ * 0x02, 0x00: Hana S/PDIF Left
+ * 0x02, 0x01: Hana S/PDIF Right
+ * 0x03, 0x00: Hanoa DAC Left
+ * 0x03, 0x01: Hanoa DAC Right
+ * 0x04, 0x00-0x07: Hana ADAT
+ * 0x05, 0x00: I2S0 Left to Alice2
+ * 0x05, 0x01: I2S0 Right to Alice2
+ * 0x06, 0x00: I2S0 Left to Alice2
+ * 0x06, 0x01: I2S0 Right to Alice2
+ * 0x07, 0x00: I2S0 Left to Alice2
+ * 0x07, 0x01: I2S0 Right to Alice2
+ *
+ * Hana2 never released, but used Tina
+ * Not needed.
+ *
+ * Hana3, rev2 1010,1212,1616 using Tina
+ * Destinations for SRATEX = 1X rates: 44.1 kHz or 48 kHz
+ * 0x00, 0x00-0x0f: 16 EMU32A channels to Tina
+ * 0x01, 0x10-0x1f: 32 EDI channels to Micro Dock
+ * 0x01, 0x00: Dock DAC 1 Left
+ * 0x01, 0x04: Dock DAC 1 Right
+ * 0x01, 0x08: Dock DAC 2 Left
+ * 0x01, 0x0c: Dock DAC 2 Right
+ * 0x01, 0x10: Dock DAC 3 Left
+ * 0x01, 0x12: Dock S/PDIF Left
+ * 0x01, 0x14: Dock DAC 3 Right
+ * 0x01, 0x16: Dock S/PDIF Right
+ * 0x01, 0x18-0x1f: Dock ADAT 0-7
+ * 0x02, 0x00: Hana3 S/PDIF Left
+ * 0x02, 0x01: Hana3 S/PDIF Right
+ * 0x03, 0x00: Hanoa DAC Left
+ * 0x03, 0x01: Hanoa DAC Right
+ * 0x04, 0x00-0x07: Hana3 ADAT 0-7
+ * 0x05, 0x00-0x0f: 16 EMU32B channels to Tina
+ * 0x06-0x07: Not used
+ *
+ * HanaLite, rev1 0404 using Alice2
+ * Destiniations for SRATEX = 1X rates: 44.1 kHz or 48 kHz
+ * 0x00, 0x00-0x0f: 16 EMU32 channels to Alice2
+ * 0x01: Not used
+ * 0x02, 0x00: S/PDIF Left
+ * 0x02, 0x01: S/PDIF Right
+ * 0x03, 0x00: DAC Left
+ * 0x03, 0x01: DAC Right
+ * 0x04-0x07: Not used
+ *
+ * HanaLiteLite, rev2 0404 using Alice2
+ * Destiniations for SRATEX = 1X rates: 44.1 kHz or 48 kHz
+ * 0x00, 0x00-0x0f: 16 EMU32 channels to Alice2
+ * 0x01: Not used
+ * 0x02, 0x00: S/PDIF Left
+ * 0x02, 0x01: S/PDIF Right
+ * 0x03, 0x00: DAC Left
+ * 0x03, 0x01: DAC Right
+ * 0x04-0x07: Not used
+ *
+ * Mana, Cardbus 1616 using Tina2
+ * Destinations for SRATEX = 1X rates: 44.1 kHz or 48 kHz
+ * 0x00, 0x00-0x0f: 16 EMU32A channels to Tina2
+ * 0x01, 0x10-0x1f: 32 EDI channels to Micro Dock
+ * 0x01, 0x00: Dock DAC 1 Left
+ * 0x01, 0x04: Dock DAC 1 Right
+ * 0x01, 0x08: Dock DAC 2 Left
+ * 0x01, 0x0c: Dock DAC 2 Right
+ * 0x01, 0x10: Dock DAC 3 Left
+ * 0x01, 0x12: Dock S/PDIF Left
+ * 0x01, 0x14: Dock DAC 3 Right
+ * 0x01, 0x16: Dock S/PDIF Right
+ * 0x01, 0x18-0x1f: Dock ADAT 0-7
+ * 0x02: Not used
+ * 0x03, 0x00: Mana DAC Left
+ * 0x03, 0x01: Mana DAC Right
+ * 0x04, 0x00-0x0f: 16 EMU32B channels to Tina2
+ * 0x05-0x07: Not used
+ *
+ *
+ */
+/* 32-bit destinations of signal in the Hana FPGA. Destinations are either
+ * physical outputs of Hana, or outputs going to Alice2 (audigy) for capture
+ * - 16 x EMU_DST_ALICE2_EMU32_X.
+ */
+/* EMU32 = 32-bit serial channel between Alice2 (audigy) and Hana (FPGA) */
+/* EMU_DST_ALICE2_EMU32_X - data channels from Hana to Alice2 used for capture.
+ * Which data is fed into a EMU_DST_ALICE2_EMU32_X channel in Hana depends on
+ * setup of mixer control for each destination - see emumixer.c -
+ * snd_emu1010_output_enum_ctls[], snd_emu1010_input_enum_ctls[]
+ */
+#define EMU_DST_ALICE2_EMU32_0	0x000f	/* 16 EMU32 channels to Alice2 +0 to +0xf */
+#define EMU_DST_ALICE2_EMU32_1	0x0000	/* 16 EMU32 channels to Alice2 +0 to +0xf */
+#define EMU_DST_ALICE2_EMU32_2	0x0001	/* 16 EMU32 channels to Alice2 +0 to +0xf */
+#define EMU_DST_ALICE2_EMU32_3	0x0002	/* 16 EMU32 channels to Alice2 +0 to +0xf */
+#define EMU_DST_ALICE2_EMU32_4	0x0003	/* 16 EMU32 channels to Alice2 +0 to +0xf */
+#define EMU_DST_ALICE2_EMU32_5	0x0004	/* 16 EMU32 channels to Alice2 +0 to +0xf */
+#define EMU_DST_ALICE2_EMU32_6	0x0005	/* 16 EMU32 channels to Alice2 +0 to +0xf */
+#define EMU_DST_ALICE2_EMU32_7	0x0006	/* 16 EMU32 channels to Alice2 +0 to +0xf */
+#define EMU_DST_ALICE2_EMU32_8	0x0007	/* 16 EMU32 channels to Alice2 +0 to +0xf */
+#define EMU_DST_ALICE2_EMU32_9	0x0008	/* 16 EMU32 channels to Alice2 +0 to +0xf */
+#define EMU_DST_ALICE2_EMU32_A	0x0009	/* 16 EMU32 channels to Alice2 +0 to +0xf */
+#define EMU_DST_ALICE2_EMU32_B	0x000a	/* 16 EMU32 channels to Alice2 +0 to +0xf */
+#define EMU_DST_ALICE2_EMU32_C	0x000b	/* 16 EMU32 channels to Alice2 +0 to +0xf */
+#define EMU_DST_ALICE2_EMU32_D	0x000c	/* 16 EMU32 channels to Alice2 +0 to +0xf */
+#define EMU_DST_ALICE2_EMU32_E	0x000d	/* 16 EMU32 channels to Alice2 +0 to +0xf */
+#define EMU_DST_ALICE2_EMU32_F	0x000e	/* 16 EMU32 channels to Alice2 +0 to +0xf */
+#define EMU_DST_DOCK_DAC1_LEFT1	0x0100	/* Audio Dock DAC1 Left, 1st or 48kHz only */
+#define EMU_DST_DOCK_DAC1_LEFT2	0x0101	/* Audio Dock DAC1 Left, 2nd or 96kHz */
+#define EMU_DST_DOCK_DAC1_LEFT3	0x0102	/* Audio Dock DAC1 Left, 3rd or 192kHz */
+#define EMU_DST_DOCK_DAC1_LEFT4	0x0103	/* Audio Dock DAC1 Left, 4th or 192kHz */
+#define EMU_DST_DOCK_DAC1_RIGHT1	0x0104	/* Audio Dock DAC1 Right, 1st or 48kHz only */
+#define EMU_DST_DOCK_DAC1_RIGHT2	0x0105	/* Audio Dock DAC1 Right, 2nd or 96kHz */
+#define EMU_DST_DOCK_DAC1_RIGHT3	0x0106	/* Audio Dock DAC1 Right, 3rd or 192kHz */
+#define EMU_DST_DOCK_DAC1_RIGHT4	0x0107	/* Audio Dock DAC1 Right, 4th or 192kHz */
+#define EMU_DST_DOCK_DAC2_LEFT1	0x0108	/* Audio Dock DAC2 Left, 1st or 48kHz only */
+#define EMU_DST_DOCK_DAC2_LEFT2	0x0109	/* Audio Dock DAC2 Left, 2nd or 96kHz */
+#define EMU_DST_DOCK_DAC2_LEFT3	0x010a	/* Audio Dock DAC2 Left, 3rd or 192kHz */
+#define EMU_DST_DOCK_DAC2_LEFT4	0x010b	/* Audio Dock DAC2 Left, 4th or 192kHz */
+#define EMU_DST_DOCK_DAC2_RIGHT1	0x010c	/* Audio Dock DAC2 Right, 1st or 48kHz only */
+#define EMU_DST_DOCK_DAC2_RIGHT2	0x010d	/* Audio Dock DAC2 Right, 2nd or 96kHz */
+#define EMU_DST_DOCK_DAC2_RIGHT3	0x010e	/* Audio Dock DAC2 Right, 3rd or 192kHz */
+#define EMU_DST_DOCK_DAC2_RIGHT4	0x010f	/* Audio Dock DAC2 Right, 4th or 192kHz */
+#define EMU_DST_DOCK_DAC3_LEFT1	0x0110	/* Audio Dock DAC1 Left, 1st or 48kHz only */
+#define EMU_DST_DOCK_DAC3_LEFT2	0x0111	/* Audio Dock DAC1 Left, 2nd or 96kHz */
+#define EMU_DST_DOCK_DAC3_LEFT3	0x0112	/* Audio Dock DAC1 Left, 3rd or 192kHz */
+#define EMU_DST_DOCK_DAC3_LEFT4	0x0113	/* Audio Dock DAC1 Left, 4th or 192kHz */
+#define EMU_DST_DOCK_PHONES_LEFT1	0x0112	/* Audio Dock PHONES Left, 1st or 48kHz only */
+#define EMU_DST_DOCK_PHONES_LEFT2	0x0113	/* Audio Dock PHONES Left, 2nd or 96kHz */
+#define EMU_DST_DOCK_DAC3_RIGHT1	0x0114	/* Audio Dock DAC1 Right, 1st or 48kHz only */
+#define EMU_DST_DOCK_DAC3_RIGHT2	0x0115	/* Audio Dock DAC1 Right, 2nd or 96kHz */
+#define EMU_DST_DOCK_DAC3_RIGHT3	0x0116	/* Audio Dock DAC1 Right, 3rd or 192kHz */
+#define EMU_DST_DOCK_DAC3_RIGHT4	0x0117	/* Audio Dock DAC1 Right, 4th or 192kHz */
+#define EMU_DST_DOCK_PHONES_RIGHT1	0x0116	/* Audio Dock PHONES Right, 1st or 48kHz only */
+#define EMU_DST_DOCK_PHONES_RIGHT2	0x0117	/* Audio Dock PHONES Right, 2nd or 96kHz */
+#define EMU_DST_DOCK_DAC4_LEFT1	0x0118	/* Audio Dock DAC2 Left, 1st or 48kHz only */
+#define EMU_DST_DOCK_DAC4_LEFT2	0x0119	/* Audio Dock DAC2 Left, 2nd or 96kHz */
+#define EMU_DST_DOCK_DAC4_LEFT3	0x011a	/* Audio Dock DAC2 Left, 3rd or 192kHz */
+#define EMU_DST_DOCK_DAC4_LEFT4	0x011b	/* Audio Dock DAC2 Left, 4th or 192kHz */
+#define EMU_DST_DOCK_SPDIF_LEFT1	0x011a	/* Audio Dock SPDIF Left, 1st or 48kHz only */
+#define EMU_DST_DOCK_SPDIF_LEFT2	0x011b	/* Audio Dock SPDIF Left, 2nd or 96kHz */
+#define EMU_DST_DOCK_DAC4_RIGHT1	0x011c	/* Audio Dock DAC2 Right, 1st or 48kHz only */
+#define EMU_DST_DOCK_DAC4_RIGHT2	0x011d	/* Audio Dock DAC2 Right, 2nd or 96kHz */
+#define EMU_DST_DOCK_DAC4_RIGHT3	0x011e	/* Audio Dock DAC2 Right, 3rd or 192kHz */
+#define EMU_DST_DOCK_DAC4_RIGHT4	0x011f	/* Audio Dock DAC2 Right, 4th or 192kHz */
+#define EMU_DST_DOCK_SPDIF_RIGHT1	0x011e	/* Audio Dock SPDIF Right, 1st or 48kHz only */
+#define EMU_DST_DOCK_SPDIF_RIGHT2	0x011f	/* Audio Dock SPDIF Right, 2nd or 96kHz */
+#define EMU_DST_HANA_SPDIF_LEFT1	0x0200	/* Hana SPDIF Left, 1st or 48kHz only */
+#define EMU_DST_HANA_SPDIF_LEFT2	0x0202	/* Hana SPDIF Left, 2nd or 96kHz */
+#define EMU_DST_HANA_SPDIF_RIGHT1	0x0201	/* Hana SPDIF Right, 1st or 48kHz only */
+#define EMU_DST_HANA_SPDIF_RIGHT2	0x0203	/* Hana SPDIF Right, 2nd or 96kHz */
+#define EMU_DST_HAMOA_DAC_LEFT1	0x0300	/* Hamoa DAC Left, 1st or 48kHz only */
+#define EMU_DST_HAMOA_DAC_LEFT2	0x0302	/* Hamoa DAC Left, 2nd or 96kHz */
+#define EMU_DST_HAMOA_DAC_LEFT3	0x0304	/* Hamoa DAC Left, 3rd or 192kHz */
+#define EMU_DST_HAMOA_DAC_LEFT4	0x0306	/* Hamoa DAC Left, 4th or 192kHz */
+#define EMU_DST_HAMOA_DAC_RIGHT1	0x0301	/* Hamoa DAC Right, 1st or 48kHz only */
+#define EMU_DST_HAMOA_DAC_RIGHT2	0x0303	/* Hamoa DAC Right, 2nd or 96kHz */
+#define EMU_DST_HAMOA_DAC_RIGHT3	0x0305	/* Hamoa DAC Right, 3rd or 192kHz */
+#define EMU_DST_HAMOA_DAC_RIGHT4	0x0307	/* Hamoa DAC Right, 4th or 192kHz */
+#define EMU_DST_HANA_ADAT	0x0400	/* Hana ADAT 8 channel out +0 to +7 */
+#define EMU_DST_ALICE_I2S0_LEFT		0x0500	/* Alice2 I2S0 Left */
+#define EMU_DST_ALICE_I2S0_RIGHT	0x0501	/* Alice2 I2S0 Right */
+#define EMU_DST_ALICE_I2S1_LEFT		0x0600	/* Alice2 I2S1 Left */
+#define EMU_DST_ALICE_I2S1_RIGHT	0x0601	/* Alice2 I2S1 Right */
+#define EMU_DST_ALICE_I2S2_LEFT		0x0700	/* Alice2 I2S2 Left */
+#define EMU_DST_ALICE_I2S2_RIGHT	0x0701	/* Alice2 I2S2 Right */
+
+/* Additional destinations for 1616(M)/Microdock */
+/* Microdock S/PDIF OUT Left, 1st or 48kHz only */
+#define EMU_DST_MDOCK_SPDIF_LEFT1	0x0112
+/* Microdock S/PDIF OUT Left, 2nd or 96kHz */
+#define EMU_DST_MDOCK_SPDIF_LEFT2	0x0113
+/* Microdock S/PDIF OUT Right, 1st or 48kHz only */
+#define EMU_DST_MDOCK_SPDIF_RIGHT1	0x0116
+/* Microdock S/PDIF OUT Right, 2nd or 96kHz  */
+#define EMU_DST_MDOCK_SPDIF_RIGHT2	0x0117
+/* Microdock S/PDIF ADAT 8 channel out +8 to +f */
+#define EMU_DST_MDOCK_ADAT		0x0118
+
+/* Headphone jack on 1010 cardbus? 44.1/48kHz only? */
+#define EMU_DST_MANA_DAC_LEFT		0x0300
+/* Headphone jack on 1010 cardbus? 44.1/48kHz only? */
+#define EMU_DST_MANA_DAC_RIGHT		0x0301
+
+/************************************************************************************************/
+/* EMU1010m HANA Sources									*/
+/************************************************************************************************/
+/* Hana, original 1010,1212,1820 using Alice2
+ * Sources SRATEX = 1X rates: 44.1 kHz or 48 kHz
+ * 0x00,0x00-0x1f: Silence
+ * 0x01, 0x10-0x1f: 32 Elink channels from Audio Dock
+ * 0x01, 0x00: Dock Mic A
+ * 0x01, 0x04: Dock Mic B
+ * 0x01, 0x08: Dock ADC 1 Left
+ * 0x01, 0x0c: Dock ADC 1 Right
+ * 0x01, 0x10: Dock ADC 2 Left
+ * 0x01, 0x14: Dock ADC 2 Right
+ * 0x01, 0x18: Dock ADC 3 Left
+ * 0x01, 0x1c: Dock ADC 3 Right
+ * 0x02, 0x00: Hana ADC Left
+ * 0x02, 0x01: Hana ADC Right
+ * 0x03, 0x00-0x0f: 16 inputs from Alice2 Emu32A output
+ * 0x03, 0x10-0x1f: 16 inputs from Alice2 Emu32B output
+ * 0x04, 0x00-0x07: Hana ADAT
+ * 0x05, 0x00: Hana S/PDIF Left
+ * 0x05, 0x01: Hana S/PDIF Right
+ * 0x06-0x07: Not used
+ *
+ * Hana2 never released, but used Tina
+ * Not needed.
+ *
+ * Hana3, rev2 1010,1212,1616 using Tina
+ * Sources SRATEX = 1X rates: 44.1 kHz or 48 kHz
+ * 0x00,0x00-0x1f: Silence
+ * 0x01, 0x10-0x1f: 32 Elink channels from Audio Dock
+ * 0x01, 0x00: Dock Mic A
+ * 0x01, 0x04: Dock Mic B
+ * 0x01, 0x08: Dock ADC 1 Left
+ * 0x01, 0x0c: Dock ADC 1 Right
+ * 0x01, 0x10: Dock ADC 2 Left
+ * 0x01, 0x12: Dock S/PDIF Left
+ * 0x01, 0x14: Dock ADC 2 Right
+ * 0x01, 0x16: Dock S/PDIF Right
+ * 0x01, 0x18-0x1f: Dock ADAT 0-7
+ * 0x01, 0x18: Dock ADC 3 Left
+ * 0x01, 0x1c: Dock ADC 3 Right
+ * 0x02, 0x00: Hanoa ADC Left
+ * 0x02, 0x01: Hanoa ADC Right
+ * 0x03, 0x00-0x0f: 16 inputs from Tina Emu32A output
+ * 0x03, 0x10-0x1f: 16 inputs from Tina Emu32B output
+ * 0x04, 0x00-0x07: Hana3 ADAT
+ * 0x05, 0x00: Hana3 S/PDIF Left
+ * 0x05, 0x01: Hana3 S/PDIF Right
+ * 0x06-0x07: Not used
+ *
+ * HanaLite, rev1 0404 using Alice2
+ * Sources SRATEX = 1X rates: 44.1 kHz or 48 kHz
+ * 0x00,0x00-0x1f: Silence
+ * 0x01: Not used
+ * 0x02, 0x00: ADC Left
+ * 0x02, 0x01: ADC Right
+ * 0x03, 0x00-0x0f: 16 inputs from Alice2 Emu32A output
+ * 0x03, 0x10-0x1f: 16 inputs from Alice2 Emu32B output
+ * 0x04: Not used
+ * 0x05, 0x00: S/PDIF Left
+ * 0x05, 0x01: S/PDIF Right
+ * 0x06-0x07: Not used
+ *
+ * HanaLiteLite, rev2 0404 using Alice2
+ * Sources SRATEX = 1X rates: 44.1 kHz or 48 kHz
+ * 0x00,0x00-0x1f: Silence
+ * 0x01: Not used
+ * 0x02, 0x00: ADC Left
+ * 0x02, 0x01: ADC Right
+ * 0x03, 0x00-0x0f: 16 inputs from Alice2 Emu32A output
+ * 0x03, 0x10-0x1f: 16 inputs from Alice2 Emu32B output
+ * 0x04: Not used
+ * 0x05, 0x00: S/PDIF Left
+ * 0x05, 0x01: S/PDIF Right
+ * 0x06-0x07: Not used
+ *
+ * Mana, Cardbus 1616 using Tina2
+ * Sources SRATEX = 1X rates: 44.1 kHz or 48 kHz
+ * 0x00,0x00-0x1f: Silence
+ * 0x01, 0x10-0x1f: 32 Elink channels from Audio Dock
+ * 0x01, 0x00: Dock Mic A
+ * 0x01, 0x04: Dock Mic B
+ * 0x01, 0x08: Dock ADC 1 Left
+ * 0x01, 0x0c: Dock ADC 1 Right
+ * 0x01, 0x10: Dock ADC 2 Left
+ * 0x01, 0x12: Dock S/PDIF Left
+ * 0x01, 0x14: Dock ADC 2 Right
+ * 0x01, 0x16: Dock S/PDIF Right
+ * 0x01, 0x18-0x1f: Dock ADAT 0-7
+ * 0x01, 0x18: Dock ADC 3 Left
+ * 0x01, 0x1c: Dock ADC 3 Right
+ * 0x02: Not used
+ * 0x03, 0x00-0x0f: 16 inputs from Tina Emu32A output
+ * 0x03, 0x10-0x1f: 16 inputs from Tina Emu32B output
+ * 0x04-0x07: Not used
+ *
+ */
+
+/* 32-bit sources of signal in the Hana FPGA. The sources are routed to
+ * destinations using mixer control for each destination - see emumixer.c
+ * Sources are either physical inputs of FPGA,
+ * or outputs from Alice (audigy) - 16 x EMU_SRC_ALICE_EMU32A +
+ * 16 x EMU_SRC_ALICE_EMU32B
+ */
+#define EMU_SRC_SILENCE		0x0000	/* Silence */
+#define EMU_SRC_DOCK_MIC_A1	0x0100	/* Audio Dock Mic A, 1st or 48kHz only */
+#define EMU_SRC_DOCK_MIC_A2	0x0101	/* Audio Dock Mic A, 2nd or 96kHz */
+#define EMU_SRC_DOCK_MIC_A3	0x0102	/* Audio Dock Mic A, 3rd or 192kHz */
+#define EMU_SRC_DOCK_MIC_A4	0x0103	/* Audio Dock Mic A, 4th or 192kHz */
+#define EMU_SRC_DOCK_MIC_B1	0x0104	/* Audio Dock Mic B, 1st or 48kHz only */
+#define EMU_SRC_DOCK_MIC_B2	0x0105	/* Audio Dock Mic B, 2nd or 96kHz */
+#define EMU_SRC_DOCK_MIC_B3	0x0106	/* Audio Dock Mic B, 3rd or 192kHz */
+#define EMU_SRC_DOCK_MIC_B4	0x0107	/* Audio Dock Mic B, 4th or 192kHz */
+#define EMU_SRC_DOCK_ADC1_LEFT1	0x0108	/* Audio Dock ADC1 Left, 1st or 48kHz only */
+#define EMU_SRC_DOCK_ADC1_LEFT2	0x0109	/* Audio Dock ADC1 Left, 2nd or 96kHz */
+#define EMU_SRC_DOCK_ADC1_LEFT3	0x010a	/* Audio Dock ADC1 Left, 3rd or 192kHz */
+#define EMU_SRC_DOCK_ADC1_LEFT4	0x010b	/* Audio Dock ADC1 Left, 4th or 192kHz */
+#define EMU_SRC_DOCK_ADC1_RIGHT1	0x010c	/* Audio Dock ADC1 Right, 1st or 48kHz only */
+#define EMU_SRC_DOCK_ADC1_RIGHT2	0x010d	/* Audio Dock ADC1 Right, 2nd or 96kHz */
+#define EMU_SRC_DOCK_ADC1_RIGHT3	0x010e	/* Audio Dock ADC1 Right, 3rd or 192kHz */
+#define EMU_SRC_DOCK_ADC1_RIGHT4	0x010f	/* Audio Dock ADC1 Right, 4th or 192kHz */
+#define EMU_SRC_DOCK_ADC2_LEFT1	0x0110	/* Audio Dock ADC2 Left, 1st or 48kHz only */
+#define EMU_SRC_DOCK_ADC2_LEFT2	0x0111	/* Audio Dock ADC2 Left, 2nd or 96kHz */
+#define EMU_SRC_DOCK_ADC2_LEFT3	0x0112	/* Audio Dock ADC2 Left, 3rd or 192kHz */
+#define EMU_SRC_DOCK_ADC2_LEFT4	0x0113	/* Audio Dock ADC2 Left, 4th or 192kHz */
+#define EMU_SRC_DOCK_ADC2_RIGHT1	0x0114	/* Audio Dock ADC2 Right, 1st or 48kHz only */
+#define EMU_SRC_DOCK_ADC2_RIGHT2	0x0115	/* Audio Dock ADC2 Right, 2nd or 96kHz */
+#define EMU_SRC_DOCK_ADC2_RIGHT3	0x0116	/* Audio Dock ADC2 Right, 3rd or 192kHz */
+#define EMU_SRC_DOCK_ADC2_RIGHT4	0x0117	/* Audio Dock ADC2 Right, 4th or 192kHz */
+#define EMU_SRC_DOCK_ADC3_LEFT1	0x0118	/* Audio Dock ADC3 Left, 1st or 48kHz only */
+#define EMU_SRC_DOCK_ADC3_LEFT2	0x0119	/* Audio Dock ADC3 Left, 2nd or 96kHz */
+#define EMU_SRC_DOCK_ADC3_LEFT3	0x011a	/* Audio Dock ADC3 Left, 3rd or 192kHz */
+#define EMU_SRC_DOCK_ADC3_LEFT4	0x011b	/* Audio Dock ADC3 Left, 4th or 192kHz */
+#define EMU_SRC_DOCK_ADC3_RIGHT1	0x011c	/* Audio Dock ADC3 Right, 1st or 48kHz only */
+#define EMU_SRC_DOCK_ADC3_RIGHT2	0x011d	/* Audio Dock ADC3 Right, 2nd or 96kHz */
+#define EMU_SRC_DOCK_ADC3_RIGHT3	0x011e	/* Audio Dock ADC3 Right, 3rd or 192kHz */
+#define EMU_SRC_DOCK_ADC3_RIGHT4	0x011f	/* Audio Dock ADC3 Right, 4th or 192kHz */
+#define EMU_SRC_HAMOA_ADC_LEFT1	0x0200	/* Hamoa ADC Left, 1st or 48kHz only */
+#define EMU_SRC_HAMOA_ADC_LEFT2	0x0202	/* Hamoa ADC Left, 2nd or 96kHz */
+#define EMU_SRC_HAMOA_ADC_LEFT3	0x0204	/* Hamoa ADC Left, 3rd or 192kHz */
+#define EMU_SRC_HAMOA_ADC_LEFT4	0x0206	/* Hamoa ADC Left, 4th or 192kHz */
+#define EMU_SRC_HAMOA_ADC_RIGHT1	0x0201	/* Hamoa ADC Right, 1st or 48kHz only */
+#define EMU_SRC_HAMOA_ADC_RIGHT2	0x0203	/* Hamoa ADC Right, 2nd or 96kHz */
+#define EMU_SRC_HAMOA_ADC_RIGHT3	0x0205	/* Hamoa ADC Right, 3rd or 192kHz */
+#define EMU_SRC_HAMOA_ADC_RIGHT4	0x0207	/* Hamoa ADC Right, 4th or 192kHz */
+#define EMU_SRC_ALICE_EMU32A		0x0300	/* Alice2 EMU32a 16 outputs. +0 to +0xf */
+#define EMU_SRC_ALICE_EMU32B		0x0310	/* Alice2 EMU32b 16 outputs. +0 to +0xf */
+#define EMU_SRC_HANA_ADAT	0x0400	/* Hana ADAT 8 channel in +0 to +7 */
+#define EMU_SRC_HANA_SPDIF_LEFT1	0x0500	/* Hana SPDIF Left, 1st or 48kHz only */
+#define EMU_SRC_HANA_SPDIF_LEFT2	0x0502	/* Hana SPDIF Left, 2nd or 96kHz */
+#define EMU_SRC_HANA_SPDIF_RIGHT1	0x0501	/* Hana SPDIF Right, 1st or 48kHz only */
+#define EMU_SRC_HANA_SPDIF_RIGHT2	0x0503	/* Hana SPDIF Right, 2nd or 96kHz */
+
+/* Additional inputs for 1616(M)/Microdock */
+/* Microdock S/PDIF Left, 1st or 48kHz only */
+#define EMU_SRC_MDOCK_SPDIF_LEFT1	0x0112
+/* Microdock S/PDIF Left, 2nd or 96kHz */
+#define EMU_SRC_MDOCK_SPDIF_LEFT2	0x0113
+/* Microdock S/PDIF Right, 1st or 48kHz only */
+#define EMU_SRC_MDOCK_SPDIF_RIGHT1	0x0116
+/* Microdock S/PDIF Right, 2nd or 96kHz */
+#define EMU_SRC_MDOCK_SPDIF_RIGHT2	0x0117
+/* Microdock ADAT 8 channel in +8 to +f */
+#define EMU_SRC_MDOCK_ADAT		0x0118
+
+/* 0x600 and 0x700 no used */
+
+/* ------------------- STRUCTURES -------------------- */
+
+enum {
+	EMU10K1_EFX,
+	EMU10K1_PCM,
+	EMU10K1_SYNTH,
+	EMU10K1_MIDI
+};
+
+struct snd_emu10k1;
+
+struct snd_emu10k1_voice {
+	struct snd_emu10k1 *emu;
+	int number;
+	unsigned int use: 1,
+	    pcm: 1,
+	    efx: 1,
+	    synth: 1,
+	    midi: 1;
+	void (*interrupt)(struct snd_emu10k1 *emu, struct snd_emu10k1_voice *pvoice);
+
+	struct snd_emu10k1_pcm *epcm;
+};
+
+enum {
+	PLAYBACK_EMUVOICE,
+	PLAYBACK_EFX,
+	CAPTURE_AC97ADC,
+	CAPTURE_AC97MIC,
+	CAPTURE_EFX
+};
+
+struct snd_emu10k1_pcm {
+	struct snd_emu10k1 *emu;
+	int type;
+	struct snd_pcm_substream *substream;
+	struct snd_emu10k1_voice *voices[NUM_EFX_PLAYBACK];
+	struct snd_emu10k1_voice *extra;
+	unsigned short running;
+	unsigned short first_ptr;
+	struct snd_util_memblk *memblk;
+	unsigned int start_addr;
+	unsigned int ccca_start_addr;
+	unsigned int capture_ipr;	/* interrupt acknowledge mask */
+	unsigned int capture_inte;	/* interrupt enable mask */
+	unsigned int capture_ba_reg;	/* buffer address register */
+	unsigned int capture_bs_reg;	/* buffer size register */
+	unsigned int capture_idx_reg;	/* buffer index register */
+	unsigned int capture_cr_val;	/* control value */
+	unsigned int capture_cr_val2;	/* control value2 (for audigy) */
+	unsigned int capture_bs_val;	/* buffer size value */
+	unsigned int capture_bufsize;	/* buffer size in bytes */
+};
+
+struct snd_emu10k1_pcm_mixer {
+	/* mono, left, right x 8 sends (4 on emu10k1) */
+	unsigned char send_routing[3][8];
+	unsigned char send_volume[3][8];
+	unsigned short attn[3];
+	struct snd_emu10k1_pcm *epcm;
+};
+
+#define snd_emu10k1_compose_send_routing(route) \
+((route[0] | (route[1] << 4) | (route[2] << 8) | (route[3] << 12)) << 16)
+
+#define snd_emu10k1_compose_audigy_fxrt1(route) \
+((unsigned int)route[0] | ((unsigned int)route[1] << 8) | ((unsigned int)route[2] << 16) | ((unsigned int)route[3] << 24))
+
+#define snd_emu10k1_compose_audigy_fxrt2(route) \
+((unsigned int)route[4] | ((unsigned int)route[5] << 8) | ((unsigned int)route[6] << 16) | ((unsigned int)route[7] << 24))
+
+struct snd_emu10k1_memblk {
+	struct snd_util_memblk mem;
+	/* private part */
+	int first_page, last_page, pages, mapped_page;
+	unsigned int map_locked;
+	struct list_head mapped_link;
+	struct list_head mapped_order_link;
+};
+
+#define snd_emu10k1_memblk_offset(blk)	(((blk)->mapped_page << PAGE_SHIFT) | ((blk)->mem.offset & (PAGE_SIZE - 1)))
+
+#define EMU10K1_MAX_TRAM_BLOCKS_PER_CODE	16
+
+struct snd_emu10k1_fx8010_ctl {
+	struct list_head list;		/* list link container */
+	unsigned int vcount;
+	unsigned int count;		/* count of GPR (1..16) */
+	unsigned short gpr[32];		/* GPR number(s) */
+	unsigned int value[32];
+	unsigned int min;		/* minimum range */
+	unsigned int max;		/* maximum range */
+	unsigned int translation;	/* translation type (EMU10K1_GPR_TRANSLATION*) */
+	struct snd_kcontrol *kcontrol;
+};
+
+typedef void (snd_fx8010_irq_handler_t)(struct snd_emu10k1 *emu, void *private_data);
+
+struct snd_emu10k1_fx8010_irq {
+	struct snd_emu10k1_fx8010_irq *next;
+	snd_fx8010_irq_handler_t *handler;
+	unsigned short gpr_running;
+	void *private_data;
+};
+
+struct snd_emu10k1_fx8010_pcm {
+	unsigned int valid: 1,
+		     opened: 1,
+		     active: 1;
+	unsigned int channels;		/* 16-bit channels count */
+	unsigned int tram_start;	/* initial ring buffer position in TRAM (in samples) */
+	unsigned int buffer_size;	/* count of buffered samples */
+	unsigned short gpr_size;		/* GPR containing size of ring buffer in samples (host) */
+	unsigned short gpr_ptr;		/* GPR containing current pointer in the ring buffer (host = reset, FX8010) */
+	unsigned short gpr_count;	/* GPR containing count of samples between two interrupts (host) */
+	unsigned short gpr_tmpcount;	/* GPR containing current count of samples to interrupt (host = set, FX8010) */
+	unsigned short gpr_trigger;	/* GPR containing trigger (activate) information (host) */
+	unsigned short gpr_running;	/* GPR containing info if PCM is running (FX8010) */
+	unsigned char etram[32];	/* external TRAM address & data */
+	struct snd_pcm_indirect pcm_rec;
+	unsigned int tram_pos;
+	unsigned int tram_shift;
+	struct snd_emu10k1_fx8010_irq *irq;
+};
+
+struct snd_emu10k1_fx8010 {
+	unsigned short fxbus_mask;	/* used FX buses (bitmask) */
+	unsigned short extin_mask;	/* used external inputs (bitmask) */
+	unsigned short extout_mask;	/* used external outputs (bitmask) */
+	unsigned short pad1;
+	unsigned int itram_size;	/* internal TRAM size in samples */
+	struct snd_dma_buffer etram_pages; /* external TRAM pages and size */
+	unsigned int dbg;		/* FX debugger register */
+	unsigned char name[128];
+	int gpr_size;			/* size of allocated GPR controls */
+	int gpr_count;			/* count of used kcontrols */
+	struct list_head gpr_ctl;	/* GPR controls */
+	struct mutex lock;
+	struct snd_emu10k1_fx8010_pcm pcm[8];
+	spinlock_t irq_lock;
+	struct snd_emu10k1_fx8010_irq *irq_handlers;
+};
+
+struct snd_emu10k1_midi {
+	struct snd_emu10k1 *emu;
+	struct snd_rawmidi *rmidi;
+	struct snd_rawmidi_substream *substream_input;
+	struct snd_rawmidi_substream *substream_output;
+	unsigned int midi_mode;
+	spinlock_t input_lock;
+	spinlock_t output_lock;
+	spinlock_t open_lock;
+	int tx_enable, rx_enable;
+	int port;
+	int ipr_tx, ipr_rx;
+	void (*interrupt)(struct snd_emu10k1 *emu, unsigned int status);
+};
+
+enum {
+	EMU_MODEL_SB,
+	EMU_MODEL_EMU1010,
+	EMU_MODEL_EMU1010B,
+	EMU_MODEL_EMU1616,
+	EMU_MODEL_EMU0404,
+};
+
+struct snd_emu_chip_details {
+	u32 vendor;
+	u32 device;
+	u32 subsystem;
+	unsigned char revision;
+	unsigned char emu10k1_chip; /* Original SB Live. Not SB Live 24bit. */
+	unsigned char emu10k2_chip; /* Audigy 1 or Audigy 2. */
+	unsigned char ca0102_chip;  /* Audigy 1 or Audigy 2. Not SB Audigy 2 Value. */
+	unsigned char ca0108_chip;  /* Audigy 2 Value */
+	unsigned char ca_cardbus_chip; /* Audigy 2 ZS Notebook */
+	unsigned char ca0151_chip;  /* P16V */
+	unsigned char spk71;        /* Has 7.1 speakers */
+	unsigned char sblive51;	    /* SBLive! 5.1 - extout 0x11 -> center, 0x12 -> lfe */
+	unsigned char spdif_bug;    /* Has Spdif phasing bug */
+	unsigned char ac97_chip;    /* Has an AC97 chip: 1 = mandatory, 2 = optional */
+	unsigned char ecard;        /* APS EEPROM */
+	unsigned char emu_model;     /* EMU model type */
+	unsigned char spi_dac;      /* SPI interface for DAC */
+	unsigned char i2c_adc;      /* I2C interface for ADC */
+	unsigned char adc_1361t;    /* Use Philips 1361T ADC */
+	unsigned char invert_shared_spdif; /* analog/digital switch inverted */
+	const char *driver;
+	const char *name;
+	const char *id;		/* for backward compatibility - can be NULL if not needed */
+};
+
+struct snd_emu1010 {
+	unsigned int output_source[64];
+	unsigned int input_source[64];
+	unsigned int adc_pads; /* bit mask */
+	unsigned int dac_pads; /* bit mask */
+	unsigned int internal_clock; /* 44100 or 48000 */
+	unsigned int optical_in; /* 0:SPDIF, 1:ADAT */
+	unsigned int optical_out; /* 0:SPDIF, 1:ADAT */
+	struct task_struct *firmware_thread;
+};
+
+struct snd_emu10k1 {
+	int irq;
+
+	unsigned long port;			/* I/O port number */
+	unsigned int tos_link: 1,		/* tos link detected */
+		rear_ac97: 1,			/* rear channels are on AC'97 */
+		enable_ir: 1;
+	unsigned int support_tlv :1;
+	/* Contains profile of card capabilities */
+	const struct snd_emu_chip_details *card_capabilities;
+	unsigned int audigy;			/* is Audigy? */
+	unsigned int revision;			/* chip revision */
+	unsigned int serial;			/* serial number */
+	unsigned short model;			/* subsystem id */
+	unsigned int card_type;			/* EMU10K1_CARD_* */
+	unsigned int ecard_ctrl;		/* ecard control bits */
+	unsigned long dma_mask;			/* PCI DMA mask */
+	unsigned int delay_pcm_irq;		/* in samples */
+	int max_cache_pages;			/* max memory size / PAGE_SIZE */
+	struct snd_dma_buffer silent_page;	/* silent page */
+	struct snd_dma_buffer ptb_pages;	/* page table pages */
+	struct snd_dma_device p16v_dma_dev;
+	struct snd_dma_buffer p16v_buffer;
+
+	struct snd_util_memhdr *memhdr;		/* page allocation list */
+	struct snd_emu10k1_memblk *reserved_page;	/* reserved page */
+
+	struct list_head mapped_link_head;
+	struct list_head mapped_order_link_head;
+	void **page_ptr_table;
+	unsigned long *page_addr_table;
+	spinlock_t memblk_lock;
+
+	unsigned int spdif_bits[3];		/* s/pdif out setup */
+	unsigned int i2c_capture_source;
+	u8 i2c_capture_volume[4][2];
+
+	struct snd_emu10k1_fx8010 fx8010;		/* FX8010 info */
+	int gpr_base;
+	
+	struct snd_ac97 *ac97;
+
+	struct pci_dev *pci;
+	struct snd_card *card;
+	struct snd_pcm *pcm;
+	struct snd_pcm *pcm_mic;
+	struct snd_pcm *pcm_efx;
+	struct snd_pcm *pcm_multi;
+	struct snd_pcm *pcm_p16v;
+
+	spinlock_t synth_lock;
+	void *synth;
+	int (*get_synth_voice)(struct snd_emu10k1 *emu);
+
+	spinlock_t reg_lock;
+	spinlock_t emu_lock;
+	spinlock_t voice_lock;
+	spinlock_t spi_lock; /* serialises access to spi port */
+	spinlock_t i2c_lock; /* serialises access to i2c port */
+
+	struct snd_emu10k1_voice voices[NUM_G];
+	struct snd_emu10k1_voice p16v_voices[4];
+	struct snd_emu10k1_voice p16v_capture_voice;
+	int p16v_device_offset;
+	u32 p16v_capture_source;
+	u32 p16v_capture_channel;
+        struct snd_emu1010 emu1010;
+	struct snd_emu10k1_pcm_mixer pcm_mixer[32];
+	struct snd_emu10k1_pcm_mixer efx_pcm_mixer[NUM_EFX_PLAYBACK];
+	struct snd_kcontrol *ctl_send_routing;
+	struct snd_kcontrol *ctl_send_volume;
+	struct snd_kcontrol *ctl_attn;
+	struct snd_kcontrol *ctl_efx_send_routing;
+	struct snd_kcontrol *ctl_efx_send_volume;
+	struct snd_kcontrol *ctl_efx_attn;
+
+	void (*hwvol_interrupt)(struct snd_emu10k1 *emu, unsigned int status);
+	void (*capture_interrupt)(struct snd_emu10k1 *emu, unsigned int status);
+	void (*capture_mic_interrupt)(struct snd_emu10k1 *emu, unsigned int status);
+	void (*capture_efx_interrupt)(struct snd_emu10k1 *emu, unsigned int status);
+	void (*spdif_interrupt)(struct snd_emu10k1 *emu, unsigned int status);
+	void (*dsp_interrupt)(struct snd_emu10k1 *emu);
+
+	struct snd_pcm_substream *pcm_capture_substream;
+	struct snd_pcm_substream *pcm_capture_mic_substream;
+	struct snd_pcm_substream *pcm_capture_efx_substream;
+	struct snd_pcm_substream *pcm_playback_efx_substream;
+
+	struct snd_timer *timer;
+
+	struct snd_emu10k1_midi midi;
+	struct snd_emu10k1_midi midi2; /* for audigy */
+
+	unsigned int efx_voices_mask[2];
+	unsigned int next_free_voice;
+
+#ifdef CONFIG_PM
+	unsigned int *saved_ptr;
+	unsigned int *saved_gpr;
+	unsigned int *tram_val_saved;
+	unsigned int *tram_addr_saved;
+	unsigned int *saved_icode;
+	unsigned int *p16v_saved;
+	unsigned int saved_a_iocfg, saved_hcfg;
+#endif
+
+};
+
+int snd_emu10k1_create(struct snd_card *card,
+		       struct pci_dev *pci,
+		       unsigned short extin_mask,
+		       unsigned short extout_mask,
+		       long max_cache_bytes,
+		       int enable_ir,
+		       uint subsystem,
+		       struct snd_emu10k1 ** remu);
+
+int snd_emu10k1_pcm(struct snd_emu10k1 * emu, int device, struct snd_pcm ** rpcm);
+int snd_emu10k1_pcm_mic(struct snd_emu10k1 * emu, int device, struct snd_pcm ** rpcm);
+int snd_emu10k1_pcm_efx(struct snd_emu10k1 * emu, int device, struct snd_pcm ** rpcm);
+int snd_p16v_pcm(struct snd_emu10k1 * emu, int device, struct snd_pcm ** rpcm);
+int snd_p16v_free(struct snd_emu10k1 * emu);
+int snd_p16v_mixer(struct snd_emu10k1 * emu);
+int snd_emu10k1_pcm_multi(struct snd_emu10k1 * emu, int device, struct snd_pcm ** rpcm);
+int snd_emu10k1_fx8010_pcm(struct snd_emu10k1 * emu, int device, struct snd_pcm ** rpcm);
+int snd_emu10k1_mixer(struct snd_emu10k1 * emu, int pcm_device, int multi_device);
+int snd_emu10k1_timer(struct snd_emu10k1 * emu, int device);
+int snd_emu10k1_fx8010_new(struct snd_emu10k1 *emu, int device, struct snd_hwdep ** rhwdep);
+
+irqreturn_t snd_emu10k1_interrupt(int irq, void *dev_id);
+
+void snd_emu10k1_voice_init(struct snd_emu10k1 * emu, int voice);
+int snd_emu10k1_init_efx(struct snd_emu10k1 *emu);
+void snd_emu10k1_free_efx(struct snd_emu10k1 *emu);
+int snd_emu10k1_fx8010_tram_setup(struct snd_emu10k1 *emu, u32 size);
+int snd_emu10k1_done(struct snd_emu10k1 * emu);
+
+/* I/O functions */
+unsigned int snd_emu10k1_ptr_read(struct snd_emu10k1 * emu, unsigned int reg, unsigned int chn);
+void snd_emu10k1_ptr_write(struct snd_emu10k1 *emu, unsigned int reg, unsigned int chn, unsigned int data);
+unsigned int snd_emu10k1_ptr20_read(struct snd_emu10k1 * emu, unsigned int reg, unsigned int chn);
+void snd_emu10k1_ptr20_write(struct snd_emu10k1 *emu, unsigned int reg, unsigned int chn, unsigned int data);
+int snd_emu10k1_spi_write(struct snd_emu10k1 * emu, unsigned int data);
+int snd_emu10k1_i2c_write(struct snd_emu10k1 *emu, u32 reg, u32 value);
+int snd_emu1010_fpga_write(struct snd_emu10k1 * emu, u32 reg, u32 value);
+int snd_emu1010_fpga_read(struct snd_emu10k1 * emu, u32 reg, u32 *value);
+int snd_emu1010_fpga_link_dst_src_write(struct snd_emu10k1 * emu, u32 dst, u32 src);
+unsigned int snd_emu10k1_efx_read(struct snd_emu10k1 *emu, unsigned int pc);
+void snd_emu10k1_intr_enable(struct snd_emu10k1 *emu, unsigned int intrenb);
+void snd_emu10k1_intr_disable(struct snd_emu10k1 *emu, unsigned int intrenb);
+void snd_emu10k1_voice_intr_enable(struct snd_emu10k1 *emu, unsigned int voicenum);
+void snd_emu10k1_voice_intr_disable(struct snd_emu10k1 *emu, unsigned int voicenum);
+void snd_emu10k1_voice_intr_ack(struct snd_emu10k1 *emu, unsigned int voicenum);
+void snd_emu10k1_voice_half_loop_intr_enable(struct snd_emu10k1 *emu, unsigned int voicenum);
+void snd_emu10k1_voice_half_loop_intr_disable(struct snd_emu10k1 *emu, unsigned int voicenum);
+void snd_emu10k1_voice_half_loop_intr_ack(struct snd_emu10k1 *emu, unsigned int voicenum);
+void snd_emu10k1_voice_set_loop_stop(struct snd_emu10k1 *emu, unsigned int voicenum);
+void snd_emu10k1_voice_clear_loop_stop(struct snd_emu10k1 *emu, unsigned int voicenum);
+void snd_emu10k1_wait(struct snd_emu10k1 *emu, unsigned int wait);
+static inline unsigned int snd_emu10k1_wc(struct snd_emu10k1 *emu) { return (inl(emu->port + WC) >> 6) & 0xfffff; }
+unsigned short snd_emu10k1_ac97_read(struct snd_ac97 *ac97, unsigned short reg);
+void snd_emu10k1_ac97_write(struct snd_ac97 *ac97, unsigned short reg, unsigned short data);
+unsigned int snd_emu10k1_rate_to_pitch(unsigned int rate);
+
+#ifdef CONFIG_PM
+void snd_emu10k1_suspend_regs(struct snd_emu10k1 *emu);
+void snd_emu10k1_resume_init(struct snd_emu10k1 *emu);
+void snd_emu10k1_resume_regs(struct snd_emu10k1 *emu);
+int snd_emu10k1_efx_alloc_pm_buffer(struct snd_emu10k1 *emu);
+void snd_emu10k1_efx_free_pm_buffer(struct snd_emu10k1 *emu);
+void snd_emu10k1_efx_suspend(struct snd_emu10k1 *emu);
+void snd_emu10k1_efx_resume(struct snd_emu10k1 *emu);
+int snd_p16v_alloc_pm_buffer(struct snd_emu10k1 *emu);
+void snd_p16v_free_pm_buffer(struct snd_emu10k1 *emu);
+void snd_p16v_suspend(struct snd_emu10k1 *emu);
+void snd_p16v_resume(struct snd_emu10k1 *emu);
+#endif
+
+/* memory allocation */
+struct snd_util_memblk *snd_emu10k1_alloc_pages(struct snd_emu10k1 *emu, struct snd_pcm_substream *substream);
+int snd_emu10k1_free_pages(struct snd_emu10k1 *emu, struct snd_util_memblk *blk);
+struct snd_util_memblk *snd_emu10k1_synth_alloc(struct snd_emu10k1 *emu, unsigned int size);
+int snd_emu10k1_synth_free(struct snd_emu10k1 *emu, struct snd_util_memblk *blk);
+int snd_emu10k1_synth_bzero(struct snd_emu10k1 *emu, struct snd_util_memblk *blk, int offset, int size);
+int snd_emu10k1_synth_copy_from_user(struct snd_emu10k1 *emu, struct snd_util_memblk *blk, int offset, const char __user *data, int size);
+int snd_emu10k1_memblk_map(struct snd_emu10k1 *emu, struct snd_emu10k1_memblk *blk);
+
+/* voice allocation */
+int snd_emu10k1_voice_alloc(struct snd_emu10k1 *emu, int type, int pair, struct snd_emu10k1_voice **rvoice);
+int snd_emu10k1_voice_free(struct snd_emu10k1 *emu, struct snd_emu10k1_voice *pvoice);
+
+/* MIDI uart */
+int snd_emu10k1_midi(struct snd_emu10k1 * emu);
+int snd_emu10k1_audigy_midi(struct snd_emu10k1 * emu);
+
+/* proc interface */
+int snd_emu10k1_proc_init(struct snd_emu10k1 * emu);
+
+/* fx8010 irq handler */
+int snd_emu10k1_fx8010_register_irq_handler(struct snd_emu10k1 *emu,
+					    snd_fx8010_irq_handler_t *handler,
+					    unsigned char gpr_running,
+					    void *private_data,
+					    struct snd_emu10k1_fx8010_irq **r_irq);
+int snd_emu10k1_fx8010_unregister_irq_handler(struct snd_emu10k1 *emu,
+					      struct snd_emu10k1_fx8010_irq *irq);
+
+#endif /* __KERNEL__ */
+
+/*
+ * ---- FX8010 ----
+ */
+
+#define EMU10K1_CARD_CREATIVE			0x00000000
+#define EMU10K1_CARD_EMUAPS			0x00000001
+
+#define EMU10K1_FX8010_PCM_COUNT		8
+
+/* instruction set */
+#define iMAC0	 0x00	/* R = A + (X * Y >> 31)   ; saturation */
+#define iMAC1	 0x01	/* R = A + (-X * Y >> 31)  ; saturation */
+#define iMAC2	 0x02	/* R = A + (X * Y >> 31)   ; wraparound */
+#define iMAC3	 0x03	/* R = A + (-X * Y >> 31)  ; wraparound */
+#define iMACINT0 0x04	/* R = A + X * Y	   ; saturation */
+#define iMACINT1 0x05	/* R = A + X * Y	   ; wraparound (31-bit) */
+#define iACC3	 0x06	/* R = A + X + Y	   ; saturation */
+#define iMACMV   0x07	/* R = A, acc += X * Y >> 31 */
+#define iANDXOR  0x08	/* R = (A & X) ^ Y */
+#define iTSTNEG  0x09	/* R = (A >= Y) ? X : ~X */
+#define iLIMITGE 0x0a	/* R = (A >= Y) ? X : Y */
+#define iLIMITLT 0x0b	/* R = (A < Y) ? X : Y */
+#define iLOG	 0x0c	/* R = linear_data, A (log_data), X (max_exp), Y (format_word) */
+#define iEXP	 0x0d	/* R = log_data, A (linear_data), X (max_exp), Y (format_word) */
+#define iINTERP  0x0e	/* R = A + (X * (Y - A) >> 31)  ; saturation */
+#define iSKIP    0x0f	/* R = A (cc_reg), X (count), Y (cc_test) */
+
+/* GPRs */
+#define FXBUS(x)	(0x00 + (x))	/* x = 0x00 - 0x0f */
+#define EXTIN(x)	(0x10 + (x))	/* x = 0x00 - 0x0f */
+#define EXTOUT(x)	(0x20 + (x))	/* x = 0x00 - 0x0f physical outs -> FXWC low 16 bits */
+#define FXBUS2(x)	(0x30 + (x))	/* x = 0x00 - 0x0f copies of fx buses for capture -> FXWC high 16 bits */
+					/* NB: 0x31 and 0x32 are shared with Center/LFE on SB live 5.1 */
+
+#define C_00000000	0x40
+#define C_00000001	0x41
+#define C_00000002	0x42
+#define C_00000003	0x43
+#define C_00000004	0x44
+#define C_00000008	0x45
+#define C_00000010	0x46
+#define C_00000020	0x47
+#define C_00000100	0x48
+#define C_00010000	0x49
+#define C_00080000	0x4a
+#define C_10000000	0x4b
+#define C_20000000	0x4c
+#define C_40000000	0x4d
+#define C_80000000	0x4e
+#define C_7fffffff	0x4f
+#define C_ffffffff	0x50
+#define C_fffffffe	0x51
+#define C_c0000000	0x52
+#define C_4f1bbcdc	0x53
+#define C_5a7ef9db	0x54
+#define C_00100000	0x55		/* ?? */
+#define GPR_ACCU	0x56		/* ACCUM, accumulator */
+#define GPR_COND	0x57		/* CCR, condition register */
+#define GPR_NOISE0	0x58		/* noise source */
+#define GPR_NOISE1	0x59		/* noise source */
+#define GPR_IRQ		0x5a		/* IRQ register */
+#define GPR_DBAC	0x5b		/* TRAM Delay Base Address Counter */
+#define GPR(x)		(FXGPREGBASE + (x)) /* free GPRs: x = 0x00 - 0xff */
+#define ITRAM_DATA(x)	(TANKMEMDATAREGBASE + 0x00 + (x)) /* x = 0x00 - 0x7f */
+#define ETRAM_DATA(x)	(TANKMEMDATAREGBASE + 0x80 + (x)) /* x = 0x00 - 0x1f */
+#define ITRAM_ADDR(x)	(TANKMEMADDRREGBASE + 0x00 + (x)) /* x = 0x00 - 0x7f */
+#define ETRAM_ADDR(x)	(TANKMEMADDRREGBASE + 0x80 + (x)) /* x = 0x00 - 0x1f */
+
+#define A_ITRAM_DATA(x)	(TANKMEMDATAREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */
+#define A_ETRAM_DATA(x)	(TANKMEMDATAREGBASE + 0xc0 + (x)) /* x = 0x00 - 0x3f */
+#define A_ITRAM_ADDR(x)	(TANKMEMADDRREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */
+#define A_ETRAM_ADDR(x)	(TANKMEMADDRREGBASE + 0xc0 + (x)) /* x = 0x00 - 0x3f */
+#define A_ITRAM_CTL(x)	(A_TANKMEMCTLREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */
+#define A_ETRAM_CTL(x)	(A_TANKMEMCTLREGBASE + 0xc0 + (x)) /* x = 0x00 - 0x3f */
+
+#define A_FXBUS(x)	(0x00 + (x))	/* x = 0x00 - 0x3f FX buses */
+#define A_EXTIN(x)	(0x40 + (x))	/* x = 0x00 - 0x0f physical ins */
+#define A_P16VIN(x)	(0x50 + (x))	/* x = 0x00 - 0x0f p16v ins (A2 only) "EMU32 inputs" */
+#define A_EXTOUT(x)	(0x60 + (x))	/* x = 0x00 - 0x1f physical outs -> A_FXWC1 0x79-7f unknown   */
+#define A_FXBUS2(x)	(0x80 + (x))	/* x = 0x00 - 0x1f extra outs used for EFX capture -> A_FXWC2 */
+#define A_EMU32OUTH(x)	(0xa0 + (x))	/* x = 0x00 - 0x0f "EMU32_OUT_10 - _1F" - ??? */
+#define A_EMU32OUTL(x)	(0xb0 + (x))	/* x = 0x00 - 0x0f "EMU32_OUT_1 - _F" - ??? */
+#define A3_EMU32IN(x)	(0x160 + (x))	/* x = 0x00 - 0x3f "EMU32_IN_00 - _3F" - Only when .device = 0x0008 */
+#define A3_EMU32OUT(x)	(0x1E0 + (x))	/* x = 0x00 - 0x0f "EMU32_OUT_00 - _3F" - Only when .device = 0x0008 */
+#define A_GPR(x)	(A_FXGPREGBASE + (x))
+
+/* cc_reg constants */
+#define CC_REG_NORMALIZED C_00000001
+#define CC_REG_BORROW	C_00000002
+#define CC_REG_MINUS	C_00000004
+#define CC_REG_ZERO	C_00000008
+#define CC_REG_SATURATE	C_00000010
+#define CC_REG_NONZERO	C_00000100
+
+/* FX buses */
+#define FXBUS_PCM_LEFT		0x00
+#define FXBUS_PCM_RIGHT		0x01
+#define FXBUS_PCM_LEFT_REAR	0x02
+#define FXBUS_PCM_RIGHT_REAR	0x03
+#define FXBUS_MIDI_LEFT		0x04
+#define FXBUS_MIDI_RIGHT	0x05
+#define FXBUS_PCM_CENTER	0x06
+#define FXBUS_PCM_LFE		0x07
+#define FXBUS_PCM_LEFT_FRONT	0x08
+#define FXBUS_PCM_RIGHT_FRONT	0x09
+#define FXBUS_MIDI_REVERB	0x0c
+#define FXBUS_MIDI_CHORUS	0x0d
+#define FXBUS_PCM_LEFT_SIDE	0x0e
+#define FXBUS_PCM_RIGHT_SIDE	0x0f
+#define FXBUS_PT_LEFT		0x14
+#define FXBUS_PT_RIGHT		0x15
+
+/* Inputs */
+#define EXTIN_AC97_L	   0x00	/* AC'97 capture channel - left */
+#define EXTIN_AC97_R	   0x01	/* AC'97 capture channel - right */
+#define EXTIN_SPDIF_CD_L   0x02	/* internal S/PDIF CD - onboard - left */
+#define EXTIN_SPDIF_CD_R   0x03	/* internal S/PDIF CD - onboard - right */
+#define EXTIN_ZOOM_L	   0x04	/* Zoom Video I2S - left */
+#define EXTIN_ZOOM_R	   0x05	/* Zoom Video I2S - right */
+#define EXTIN_TOSLINK_L	   0x06	/* LiveDrive - TOSLink Optical - left */
+#define EXTIN_TOSLINK_R    0x07	/* LiveDrive - TOSLink Optical - right */
+#define EXTIN_LINE1_L	   0x08	/* LiveDrive - Line/Mic 1 - left */
+#define EXTIN_LINE1_R	   0x09	/* LiveDrive - Line/Mic 1 - right */
+#define EXTIN_COAX_SPDIF_L 0x0a	/* LiveDrive - Coaxial S/PDIF - left */
+#define EXTIN_COAX_SPDIF_R 0x0b /* LiveDrive - Coaxial S/PDIF - right */
+#define EXTIN_LINE2_L	   0x0c	/* LiveDrive - Line/Mic 2 - left */
+#define EXTIN_LINE2_R	   0x0d	/* LiveDrive - Line/Mic 2 - right */
+
+/* Outputs */
+#define EXTOUT_AC97_L	   0x00	/* AC'97 playback channel - left */
+#define EXTOUT_AC97_R	   0x01	/* AC'97 playback channel - right */
+#define EXTOUT_TOSLINK_L   0x02	/* LiveDrive - TOSLink Optical - left */
+#define EXTOUT_TOSLINK_R   0x03	/* LiveDrive - TOSLink Optical - right */
+#define EXTOUT_AC97_CENTER 0x04	/* SB Live 5.1 - center */
+#define EXTOUT_AC97_LFE	   0x05 /* SB Live 5.1 - LFE */
+#define EXTOUT_HEADPHONE_L 0x06	/* LiveDrive - Headphone - left */
+#define EXTOUT_HEADPHONE_R 0x07	/* LiveDrive - Headphone - right */
+#define EXTOUT_REAR_L	   0x08	/* Rear channel - left */
+#define EXTOUT_REAR_R	   0x09	/* Rear channel - right */
+#define EXTOUT_ADC_CAP_L   0x0a	/* ADC Capture buffer - left */
+#define EXTOUT_ADC_CAP_R   0x0b	/* ADC Capture buffer - right */
+#define EXTOUT_MIC_CAP	   0x0c	/* MIC Capture buffer */
+#define EXTOUT_AC97_REAR_L 0x0d	/* SB Live 5.1 (c) 2003 - Rear Left */
+#define EXTOUT_AC97_REAR_R 0x0e	/* SB Live 5.1 (c) 2003 - Rear Right */
+#define EXTOUT_ACENTER	   0x11 /* Analog Center */
+#define EXTOUT_ALFE	   0x12 /* Analog LFE */
+
+/* Audigy Inputs */
+#define A_EXTIN_AC97_L		0x00	/* AC'97 capture channel - left */
+#define A_EXTIN_AC97_R		0x01	/* AC'97 capture channel - right */
+#define A_EXTIN_SPDIF_CD_L	0x02	/* digital CD left */
+#define A_EXTIN_SPDIF_CD_R	0x03	/* digital CD left */
+#define A_EXTIN_OPT_SPDIF_L     0x04    /* audigy drive Optical SPDIF - left */
+#define A_EXTIN_OPT_SPDIF_R     0x05    /*                              right */ 
+#define A_EXTIN_LINE2_L		0x08	/* audigy drive line2/mic2 - left */
+#define A_EXTIN_LINE2_R		0x09	/*                           right */
+#define A_EXTIN_ADC_L		0x0a    /* Philips ADC - left */
+#define A_EXTIN_ADC_R		0x0b    /*               right */
+#define A_EXTIN_AUX2_L		0x0c	/* audigy drive aux2 - left */
+#define A_EXTIN_AUX2_R		0x0d	/*                   - right */
+
+/* Audigiy Outputs */
+#define A_EXTOUT_FRONT_L	0x00	/* digital front left */
+#define A_EXTOUT_FRONT_R	0x01	/*               right */
+#define A_EXTOUT_CENTER		0x02	/* digital front center */
+#define A_EXTOUT_LFE		0x03	/* digital front lfe */
+#define A_EXTOUT_HEADPHONE_L	0x04	/* headphone audigy drive left */
+#define A_EXTOUT_HEADPHONE_R	0x05	/*                        right */
+#define A_EXTOUT_REAR_L		0x06	/* digital rear left */
+#define A_EXTOUT_REAR_R		0x07	/*              right */
+#define A_EXTOUT_AFRONT_L	0x08	/* analog front left */
+#define A_EXTOUT_AFRONT_R	0x09	/*              right */
+#define A_EXTOUT_ACENTER	0x0a	/* analog center */
+#define A_EXTOUT_ALFE		0x0b	/* analog LFE */
+#define A_EXTOUT_ASIDE_L	0x0c	/* analog side left  - Audigy 2 ZS */
+#define A_EXTOUT_ASIDE_R	0x0d	/*             right - Audigy 2 ZS */
+#define A_EXTOUT_AREAR_L	0x0e	/* analog rear left */
+#define A_EXTOUT_AREAR_R	0x0f	/*             right */
+#define A_EXTOUT_AC97_L		0x10	/* AC97 left (front) */
+#define A_EXTOUT_AC97_R		0x11	/*      right */
+#define A_EXTOUT_ADC_CAP_L	0x16	/* ADC capture buffer left */
+#define A_EXTOUT_ADC_CAP_R	0x17	/*                    right */
+#define A_EXTOUT_MIC_CAP	0x18	/* Mic capture buffer */
+
+/* Audigy constants */
+#define A_C_00000000	0xc0
+#define A_C_00000001	0xc1
+#define A_C_00000002	0xc2
+#define A_C_00000003	0xc3
+#define A_C_00000004	0xc4
+#define A_C_00000008	0xc5
+#define A_C_00000010	0xc6
+#define A_C_00000020	0xc7
+#define A_C_00000100	0xc8
+#define A_C_00010000	0xc9
+#define A_C_00000800	0xca
+#define A_C_10000000	0xcb
+#define A_C_20000000	0xcc
+#define A_C_40000000	0xcd
+#define A_C_80000000	0xce
+#define A_C_7fffffff	0xcf
+#define A_C_ffffffff	0xd0
+#define A_C_fffffffe	0xd1
+#define A_C_c0000000	0xd2
+#define A_C_4f1bbcdc	0xd3
+#define A_C_5a7ef9db	0xd4
+#define A_C_00100000	0xd5
+#define A_GPR_ACCU	0xd6		/* ACCUM, accumulator */
+#define A_GPR_COND	0xd7		/* CCR, condition register */
+#define A_GPR_NOISE0	0xd8		/* noise source */
+#define A_GPR_NOISE1	0xd9		/* noise source */
+#define A_GPR_IRQ	0xda		/* IRQ register */
+#define A_GPR_DBAC	0xdb		/* TRAM Delay Base Address Counter - internal */
+#define A_GPR_DBACE	0xde		/* TRAM Delay Base Address Counter - external */
+
+/* definitions for debug register */
+#define EMU10K1_DBG_ZC			0x80000000	/* zero tram counter */
+#define EMU10K1_DBG_SATURATION_OCCURED	0x02000000	/* saturation control */
+#define EMU10K1_DBG_SATURATION_ADDR	0x01ff0000	/* saturation address */
+#define EMU10K1_DBG_SINGLE_STEP		0x00008000	/* single step mode */
+#define EMU10K1_DBG_STEP		0x00004000	/* start single step */
+#define EMU10K1_DBG_CONDITION_CODE	0x00003e00	/* condition code */
+#define EMU10K1_DBG_SINGLE_STEP_ADDR	0x000001ff	/* single step address */
+
+/* tank memory address line */
+#ifndef __KERNEL__
+#define TANKMEMADDRREG_ADDR_MASK 0x000fffff	/* 20 bit tank address field			*/
+#define TANKMEMADDRREG_CLEAR	 0x00800000	/* Clear tank memory				*/
+#define TANKMEMADDRREG_ALIGN	 0x00400000	/* Align read or write relative to tank access	*/
+#define TANKMEMADDRREG_WRITE	 0x00200000	/* Write to tank memory				*/
+#define TANKMEMADDRREG_READ	 0x00100000	/* Read from tank memory			*/
+#endif
+
+struct snd_emu10k1_fx8010_info {
+	unsigned int internal_tram_size;	/* in samples */
+	unsigned int external_tram_size;	/* in samples */
+	char fxbus_names[16][32];		/* names of FXBUSes */
+	char extin_names[16][32];		/* names of external inputs */
+	char extout_names[32][32];		/* names of external outputs */
+	unsigned int gpr_controls;		/* count of GPR controls */
+};
+
+#define EMU10K1_GPR_TRANSLATION_NONE		0
+#define EMU10K1_GPR_TRANSLATION_TABLE100	1
+#define EMU10K1_GPR_TRANSLATION_BASS		2
+#define EMU10K1_GPR_TRANSLATION_TREBLE		3
+#define EMU10K1_GPR_TRANSLATION_ONOFF		4
+
+struct snd_emu10k1_fx8010_control_gpr {
+	struct snd_ctl_elem_id id;		/* full control ID definition */
+	unsigned int vcount;		/* visible count */
+	unsigned int count;		/* count of GPR (1..16) */
+	unsigned short gpr[32];		/* GPR number(s) */
+	unsigned int value[32];		/* initial values */
+	unsigned int min;		/* minimum range */
+	unsigned int max;		/* maximum range */
+	unsigned int translation;	/* translation type (EMU10K1_GPR_TRANSLATION*) */
+	const unsigned int *tlv;
+};
+
+/* old ABI without TLV support */
+struct snd_emu10k1_fx8010_control_old_gpr {
+	struct snd_ctl_elem_id id;
+	unsigned int vcount;
+	unsigned int count;
+	unsigned short gpr[32];
+	unsigned int value[32];
+	unsigned int min;
+	unsigned int max;
+	unsigned int translation;
+};
+
+struct snd_emu10k1_fx8010_code {
+	char name[128];
+
+	DECLARE_BITMAP(gpr_valid, 0x200); /* bitmask of valid initializers */
+	__u32 __user *gpr_map;		/* initializers */
+
+	unsigned int gpr_add_control_count; /* count of GPR controls to add/replace */
+	struct snd_emu10k1_fx8010_control_gpr __user *gpr_add_controls; /* GPR controls to add/replace */
+
+	unsigned int gpr_del_control_count; /* count of GPR controls to remove */
+	struct snd_ctl_elem_id __user *gpr_del_controls; /* IDs of GPR controls to remove */
+
+	unsigned int gpr_list_control_count; /* count of GPR controls to list */
+	unsigned int gpr_list_control_total; /* total count of GPR controls */
+	struct snd_emu10k1_fx8010_control_gpr __user *gpr_list_controls; /* listed GPR controls */
+
+	DECLARE_BITMAP(tram_valid, 0x100); /* bitmask of valid initializers */
+	__u32 __user *tram_data_map;	  /* data initializers */
+	__u32 __user *tram_addr_map;	  /* map initializers */
+
+	DECLARE_BITMAP(code_valid, 1024); /* bitmask of valid instructions */
+	__u32 __user *code;		  /* one instruction - 64 bits */
+};
+
+struct snd_emu10k1_fx8010_tram {
+	unsigned int address;		/* 31.bit == 1 -> external TRAM */
+	unsigned int size;		/* size in samples (4 bytes) */
+	unsigned int *samples;		/* pointer to samples (20-bit) */
+					/* NULL->clear memory */
+};
+
+struct snd_emu10k1_fx8010_pcm_rec {
+	unsigned int substream;		/* substream number */
+	unsigned int res1;		/* reserved */
+	unsigned int channels;		/* 16-bit channels count, zero = remove this substream */
+	unsigned int tram_start;	/* ring buffer position in TRAM (in samples) */
+	unsigned int buffer_size;	/* count of buffered samples */
+	unsigned short gpr_size;		/* GPR containing size of ringbuffer in samples (host) */
+	unsigned short gpr_ptr;		/* GPR containing current pointer in the ring buffer (host = reset, FX8010) */
+	unsigned short gpr_count;	/* GPR containing count of samples between two interrupts (host) */
+	unsigned short gpr_tmpcount;	/* GPR containing current count of samples to interrupt (host = set, FX8010) */
+	unsigned short gpr_trigger;	/* GPR containing trigger (activate) information (host) */
+	unsigned short gpr_running;	/* GPR containing info if PCM is running (FX8010) */
+	unsigned char pad;		/* reserved */
+	unsigned char etram[32];	/* external TRAM address & data (one per channel) */
+	unsigned int res2;		/* reserved */
+};
+
+#define SNDRV_EMU10K1_VERSION		SNDRV_PROTOCOL_VERSION(1, 0, 1)
+
+#define SNDRV_EMU10K1_IOCTL_INFO	_IOR ('H', 0x10, struct snd_emu10k1_fx8010_info)
+#define SNDRV_EMU10K1_IOCTL_CODE_POKE	_IOW ('H', 0x11, struct snd_emu10k1_fx8010_code)
+#define SNDRV_EMU10K1_IOCTL_CODE_PEEK	_IOWR('H', 0x12, struct snd_emu10k1_fx8010_code)
+#define SNDRV_EMU10K1_IOCTL_TRAM_SETUP	_IOW ('H', 0x20, int)
+#define SNDRV_EMU10K1_IOCTL_TRAM_POKE	_IOW ('H', 0x21, struct snd_emu10k1_fx8010_tram)
+#define SNDRV_EMU10K1_IOCTL_TRAM_PEEK	_IOWR('H', 0x22, struct snd_emu10k1_fx8010_tram)
+#define SNDRV_EMU10K1_IOCTL_PCM_POKE	_IOW ('H', 0x30, struct snd_emu10k1_fx8010_pcm_rec)
+#define SNDRV_EMU10K1_IOCTL_PCM_PEEK	_IOWR('H', 0x31, struct snd_emu10k1_fx8010_pcm_rec)
+#define SNDRV_EMU10K1_IOCTL_PVERSION	_IOR ('H', 0x40, int)
+#define SNDRV_EMU10K1_IOCTL_STOP	_IO  ('H', 0x80)
+#define SNDRV_EMU10K1_IOCTL_CONTINUE	_IO  ('H', 0x81)
+#define SNDRV_EMU10K1_IOCTL_ZERO_TRAM_COUNTER _IO ('H', 0x82)
+#define SNDRV_EMU10K1_IOCTL_SINGLE_STEP	_IOW ('H', 0x83, int)
+#define SNDRV_EMU10K1_IOCTL_DBG_READ	_IOR ('H', 0x84, int)
+
+/* typedefs for compatibility to user-space */
+typedef struct snd_emu10k1_fx8010_info emu10k1_fx8010_info_t;
+typedef struct snd_emu10k1_fx8010_control_gpr emu10k1_fx8010_control_gpr_t;
+typedef struct snd_emu10k1_fx8010_code emu10k1_fx8010_code_t;
+typedef struct snd_emu10k1_fx8010_tram emu10k1_fx8010_tram_t;
+typedef struct snd_emu10k1_fx8010_pcm_rec emu10k1_fx8010_pcm_t;
+
+#endif	/* __SOUND_EMU10K1_H */
diff --git a/include/sound/emu10k1_synth.h b/include/sound/emu10k1_synth.h
new file mode 100644
index 00000000..6ef61c42
--- /dev/null
+++ b/include/sound/emu10k1_synth.h
@@ -0,0 +1,39 @@
+#ifndef __EMU10K1_SYNTH_H
+#define __EMU10K1_SYNTH_H
+/*
+ *  Defines for the Emu10k1 WaveTable synth
+ *
+ *  Copyright (C) 2000 Takashi Iwai <tiwai@suse.de>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include "emu10k1.h"
+#include "emux_synth.h"
+
+/* sequencer device id */
+#define SNDRV_SEQ_DEV_ID_EMU10K1_SYNTH	"emu10k1-synth"
+
+/* argument for snd_seq_device_new */
+struct snd_emu10k1_synth_arg {
+	struct snd_emu10k1 *hwptr;	/* chip */
+	int index;		/* sequencer client index */
+	int seq_ports;		/* number of sequencer ports to be created */
+	int max_voices;		/* maximum number of voices for wavetable */
+};
+
+#define EMU10K1_MAX_MEMSIZE	(32 * 1024 * 1024) /* 32MB */
+
+#endif
diff --git a/include/sound/emu8000.h b/include/sound/emu8000.h
new file mode 100644
index 00000000..c8f66bde
--- /dev/null
+++ b/include/sound/emu8000.h
@@ -0,0 +1,121 @@
+#ifndef __SOUND_EMU8000_H
+#define __SOUND_EMU8000_H
+/*
+ *  Defines for the emu8000 (AWE32/64)
+ *
+ *  Copyright (C) 1999 Steve Ratcliffe
+ *  Copyright (C) 1999-2000 Takashi Iwai <tiwai@suse.de>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include "emux_synth.h"
+#include "seq_kernel.h"
+
+/*
+ * Hardware parameters.
+ */
+#define EMU8000_MAX_DRAM (28 * 1024 * 1024) /* Max on-board mem is 28Mb ???*/
+#define EMU8000_DRAM_OFFSET 0x200000	/* Beginning of on board ram */
+#define EMU8000_CHANNELS   32	/* Number of hardware channels */
+#define EMU8000_DRAM_VOICES	30	/* number of normal voices */
+
+/* Flags to set a dma channel to read or write */
+#define EMU8000_RAM_READ   0
+#define EMU8000_RAM_WRITE  1
+#define EMU8000_RAM_CLOSE  2
+#define EMU8000_RAM_MODE_MASK	0x03
+#define EMU8000_RAM_RIGHT	0x10	/* use 'right' DMA channel */
+
+enum {
+	EMU8000_CONTROL_BASS = 0,
+	EMU8000_CONTROL_TREBLE,
+	EMU8000_CONTROL_CHORUS_MODE,
+	EMU8000_CONTROL_REVERB_MODE,
+	EMU8000_CONTROL_FM_CHORUS_DEPTH,
+	EMU8000_CONTROL_FM_REVERB_DEPTH,
+	EMU8000_NUM_CONTROLS,
+};
+
+/*
+ * Structure to hold all state information for the emu8000 driver.
+ *
+ * Note 1: The chip supports 32 channels in hardware this is max_channels
+ * some of the channels may be used for other things so max_channels is
+ * the number in use for wave voices.
+ */
+struct snd_emu8000 {
+
+	struct snd_emux *emu;
+
+	int index;		/* sequencer client index */
+	int seq_ports;		/* number of sequencer ports */
+	int fm_chorus_depth;	/* FM OPL3 chorus depth */
+	int fm_reverb_depth;	/* FM OPL3 reverb depth */
+
+	int mem_size;		/* memory size */
+	unsigned long port1;	/* Port usually base+0 */
+	unsigned long port2;	/* Port usually at base+0x400 */
+	unsigned long port3;	/* Port usually at base+0x800 */
+	struct resource *res_port1;
+	struct resource *res_port2;
+	struct resource *res_port3;
+	unsigned short last_reg;/* Last register command */
+	spinlock_t reg_lock;
+
+	int dram_checked;
+
+	struct snd_card *card;		/* The card that this belongs to */
+
+	int chorus_mode;
+	int reverb_mode;
+	int bass_level;
+	int treble_level;
+
+	struct snd_util_memhdr *memhdr;
+
+	spinlock_t control_lock;
+	struct snd_kcontrol *controls[EMU8000_NUM_CONTROLS];
+
+	struct snd_pcm *pcm; /* pcm on emu8000 wavetable */
+
+};
+
+/* sequencer device id */
+#define SNDRV_SEQ_DEV_ID_EMU8000	"emu8000-synth"
+
+
+/* exported functions */
+int snd_emu8000_new(struct snd_card *card, int device, long port, int seq_ports,
+		    struct snd_seq_device **ret);
+void snd_emu8000_poke(struct snd_emu8000 *emu, unsigned int port, unsigned int reg,
+		      unsigned int val);
+unsigned short snd_emu8000_peek(struct snd_emu8000 *emu, unsigned int port,
+				unsigned int reg);
+void snd_emu8000_poke_dw(struct snd_emu8000 *emu, unsigned int port, unsigned int reg,
+			 unsigned int val);
+unsigned int snd_emu8000_peek_dw(struct snd_emu8000 *emu, unsigned int port,
+				 unsigned int reg);
+void snd_emu8000_dma_chan(struct snd_emu8000 *emu, int ch, int mode);
+
+void snd_emu8000_init_fm(struct snd_emu8000 *emu);
+
+void snd_emu8000_update_chorus_mode(struct snd_emu8000 *emu);
+void snd_emu8000_update_reverb_mode(struct snd_emu8000 *emu);
+void snd_emu8000_update_equalizer(struct snd_emu8000 *emu);
+int snd_emu8000_load_chorus_fx(struct snd_emu8000 *emu, int mode, const void __user *buf, long len);
+int snd_emu8000_load_reverb_fx(struct snd_emu8000 *emu, int mode, const void __user *buf, long len);
+
+#endif /* __SOUND_EMU8000_H */
diff --git a/include/sound/emu8000_reg.h b/include/sound/emu8000_reg.h
new file mode 100644
index 00000000..4b9827ac
--- /dev/null
+++ b/include/sound/emu8000_reg.h
@@ -0,0 +1,207 @@
+#ifndef __SOUND_EMU8000_REG_H
+#define __SOUND_EMU8000_REG_H
+/*
+ *  Register operations for the EMU8000
+ *
+ *  Copyright (C) 1999 Steve Ratcliffe
+ *
+ *  Based on awe_wave.c by Takashi Iwai
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+/*
+ * Data port addresses relative to the EMU base.
+ */
+#define EMU8000_DATA0(e)    ((e)->port1)
+#define EMU8000_DATA1(e)    ((e)->port2)
+#define EMU8000_DATA2(e)    ((e)->port2+2)
+#define EMU8000_DATA3(e)    ((e)->port3)
+#define EMU8000_PTR(e)      ((e)->port3+2)
+
+/*
+ * Make a command from a register and channel.
+ */
+#define EMU8000_CMD(reg, chan) ((reg)<<5 | (chan))
+
+/*
+ * Commands to read and write the EMU8000 registers.
+ * These macros should be used for all register accesses.
+ */
+#define EMU8000_CPF_READ(emu, chan) \
+	snd_emu8000_peek_dw((emu), EMU8000_DATA0(emu), EMU8000_CMD(0, (chan)))
+#define EMU8000_PTRX_READ(emu, chan) \
+	snd_emu8000_peek_dw((emu), EMU8000_DATA0(emu), EMU8000_CMD(1, (chan)))
+#define EMU8000_CVCF_READ(emu, chan) \
+	snd_emu8000_peek_dw((emu), EMU8000_DATA0(emu), EMU8000_CMD(2, (chan)))
+#define EMU8000_VTFT_READ(emu, chan) \
+	snd_emu8000_peek_dw((emu), EMU8000_DATA0(emu), EMU8000_CMD(3, (chan)))
+#define EMU8000_PSST_READ(emu, chan) \
+	snd_emu8000_peek_dw((emu), EMU8000_DATA0(emu), EMU8000_CMD(6, (chan)))
+#define EMU8000_CSL_READ(emu, chan) \
+	snd_emu8000_peek_dw((emu), EMU8000_DATA0(emu), EMU8000_CMD(7, (chan)))
+#define EMU8000_CCCA_READ(emu, chan) \
+	snd_emu8000_peek_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(0, (chan)))
+#define EMU8000_HWCF4_READ(emu) \
+	snd_emu8000_peek_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 9))
+#define EMU8000_HWCF5_READ(emu) \
+	snd_emu8000_peek_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 10))
+#define EMU8000_HWCF6_READ(emu) \
+	snd_emu8000_peek_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 13))
+#define EMU8000_SMALR_READ(emu) \
+	snd_emu8000_peek_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 20))
+#define EMU8000_SMARR_READ(emu) \
+	snd_emu8000_peek_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 21))
+#define EMU8000_SMALW_READ(emu) \
+	snd_emu8000_peek_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 22))
+#define EMU8000_SMARW_READ(emu) \
+	snd_emu8000_peek_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 23))
+#define EMU8000_SMLD_READ(emu) \
+	snd_emu8000_peek((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 26))
+#define EMU8000_SMRD_READ(emu) \
+	snd_emu8000_peek((emu), EMU8000_DATA2(emu), EMU8000_CMD(1, 26))
+#define EMU8000_WC_READ(emu) \
+	snd_emu8000_peek((emu), EMU8000_DATA2(emu), EMU8000_CMD(1, 27))
+#define EMU8000_HWCF1_READ(emu) \
+	snd_emu8000_peek((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 29))
+#define EMU8000_HWCF2_READ(emu) \
+	snd_emu8000_peek((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 30))
+#define EMU8000_HWCF3_READ(emu) \
+	snd_emu8000_peek((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 31))
+#define EMU8000_INIT1_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA1(emu), EMU8000_CMD(2, (chan)))
+#define EMU8000_INIT2_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA2(emu), EMU8000_CMD(2, (chan)))
+#define EMU8000_INIT3_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA1(emu), EMU8000_CMD(3, (chan)))
+#define EMU8000_INIT4_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA2(emu), EMU8000_CMD(3, (chan)))
+#define EMU8000_ENVVOL_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA1(emu), EMU8000_CMD(4, (chan)))
+#define EMU8000_DCYSUSV_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA1(emu), EMU8000_CMD(5, (chan)))
+#define EMU8000_ENVVAL_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA1(emu), EMU8000_CMD(6, (chan)))
+#define EMU8000_DCYSUS_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA1(emu), EMU8000_CMD(7, (chan)))
+#define EMU8000_ATKHLDV_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA2(emu), EMU8000_CMD(4, (chan)))
+#define EMU8000_LFO1VAL_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA2(emu), EMU8000_CMD(5, (chan)))
+#define EMU8000_ATKHLD_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA2(emu), EMU8000_CMD(6, (chan)))
+#define EMU8000_LFO2VAL_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA2(emu), EMU8000_CMD(7, (chan)))
+#define EMU8000_IP_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA3(emu), EMU8000_CMD(0, (chan)))
+#define EMU8000_IFATN_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA3(emu), EMU8000_CMD(1, (chan)))
+#define EMU8000_PEFE_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA3(emu), EMU8000_CMD(2, (chan)))
+#define EMU8000_FMMOD_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA3(emu), EMU8000_CMD(3, (chan)))
+#define EMU8000_TREMFRQ_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA3(emu), EMU8000_CMD(4, (chan)))
+#define EMU8000_FM2FRQ2_READ(emu, chan) \
+	snd_emu8000_peek((emu), EMU8000_DATA3(emu), EMU8000_CMD(5, (chan)))
+
+
+#define EMU8000_CPF_WRITE(emu, chan, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA0(emu), EMU8000_CMD(0, (chan)), (val))
+#define EMU8000_PTRX_WRITE(emu, chan, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA0(emu), EMU8000_CMD(1, (chan)), (val))
+#define EMU8000_CVCF_WRITE(emu, chan, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA0(emu), EMU8000_CMD(2, (chan)), (val))
+#define EMU8000_VTFT_WRITE(emu, chan, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA0(emu), EMU8000_CMD(3, (chan)), (val))
+#define EMU8000_PSST_WRITE(emu, chan, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA0(emu), EMU8000_CMD(6, (chan)), (val))
+#define EMU8000_CSL_WRITE(emu, chan, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA0(emu), EMU8000_CMD(7, (chan)), (val))
+#define EMU8000_CCCA_WRITE(emu, chan, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(0, (chan)), (val))
+#define EMU8000_HWCF4_WRITE(emu, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 9), (val))
+#define EMU8000_HWCF5_WRITE(emu, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 10), (val))
+#define EMU8000_HWCF6_WRITE(emu, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 13), (val))
+/* this register is not documented */
+#define EMU8000_HWCF7_WRITE(emu, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 14), (val))
+#define EMU8000_SMALR_WRITE(emu, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 20), (val))
+#define EMU8000_SMARR_WRITE(emu, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 21), (val))
+#define EMU8000_SMALW_WRITE(emu, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 22), (val))
+#define EMU8000_SMARW_WRITE(emu, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 23), (val))
+#define EMU8000_SMLD_WRITE(emu, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 26), (val))
+#define EMU8000_SMRD_WRITE(emu, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA2(emu), EMU8000_CMD(1, 26), (val))
+#define EMU8000_WC_WRITE(emu, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA2(emu), EMU8000_CMD(1, 27), (val))
+#define EMU8000_HWCF1_WRITE(emu, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 29), (val))
+#define EMU8000_HWCF2_WRITE(emu, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 30), (val))
+#define EMU8000_HWCF3_WRITE(emu, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA1(emu), EMU8000_CMD(1, 31), (val))
+#define EMU8000_INIT1_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA1(emu), EMU8000_CMD(2, (chan)), (val))
+#define EMU8000_INIT2_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA2(emu), EMU8000_CMD(2, (chan)), (val))
+#define EMU8000_INIT3_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA1(emu), EMU8000_CMD(3, (chan)), (val))
+#define EMU8000_INIT4_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA2(emu), EMU8000_CMD(3, (chan)), (val))
+#define EMU8000_ENVVOL_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA1(emu), EMU8000_CMD(4, (chan)), (val))
+#define EMU8000_DCYSUSV_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA1(emu), EMU8000_CMD(5, (chan)), (val))
+#define EMU8000_ENVVAL_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA1(emu), EMU8000_CMD(6, (chan)), (val))
+#define EMU8000_DCYSUS_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA1(emu), EMU8000_CMD(7, (chan)), (val))
+#define EMU8000_ATKHLDV_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA2(emu), EMU8000_CMD(4, (chan)), (val))
+#define EMU8000_LFO1VAL_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA2(emu), EMU8000_CMD(5, (chan)), (val))
+#define EMU8000_ATKHLD_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA2(emu), EMU8000_CMD(6, (chan)), (val))
+#define EMU8000_LFO2VAL_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA2(emu), EMU8000_CMD(7, (chan)), (val))
+#define EMU8000_IP_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA3(emu), EMU8000_CMD(0, (chan)), (val))
+#define EMU8000_IFATN_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA3(emu), EMU8000_CMD(1, (chan)), (val))
+#define EMU8000_PEFE_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA3(emu), EMU8000_CMD(2, (chan)), (val))
+#define EMU8000_FMMOD_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA3(emu), EMU8000_CMD(3, (chan)), (val))
+#define EMU8000_TREMFRQ_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA3(emu), EMU8000_CMD(4, (chan)), (val))
+#define EMU8000_FM2FRQ2_WRITE(emu, chan, val) \
+	snd_emu8000_poke((emu), EMU8000_DATA3(emu), EMU8000_CMD(5, (chan)), (val))
+
+#define EMU8000_0080_WRITE(emu, chan, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA0(emu), EMU8000_CMD(4, (chan)), (val))
+#define EMU8000_00A0_WRITE(emu, chan, val) \
+	snd_emu8000_poke_dw((emu), EMU8000_DATA0(emu), EMU8000_CMD(5, (chan)), (val))
+
+#endif /* __SOUND_EMU8000_REG_H */
diff --git a/include/sound/emux_legacy.h b/include/sound/emux_legacy.h
new file mode 100644
index 00000000..6fe3da2a
--- /dev/null
+++ b/include/sound/emux_legacy.h
@@ -0,0 +1,146 @@
+#ifndef __SOUND_EMUX_LEGACY_H
+#define __SOUND_EMUX_LEGACY_H
+
+/*
+ *  Copyright (c) 1999-2000 Takashi Iwai <tiwai@suse.de>
+ *
+ *  Definitions of OSS compatible headers for Emu8000 device informations
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include "seq_oss_legacy.h"
+
+/*
+ * awe hardware controls
+ */
+
+#define _EMUX_OSS_DEBUG_MODE		0x00
+#define _EMUX_OSS_REVERB_MODE		0x01
+#define _EMUX_OSS_CHORUS_MODE		0x02
+#define _EMUX_OSS_REMOVE_LAST_SAMPLES	0x03
+#define _EMUX_OSS_INITIALIZE_CHIP	0x04
+#define _EMUX_OSS_SEND_EFFECT		0x05
+#define _EMUX_OSS_TERMINATE_CHANNEL	0x06
+#define _EMUX_OSS_TERMINATE_ALL		0x07
+#define _EMUX_OSS_INITIAL_VOLUME	0x08
+#define _EMUX_OSS_INITIAL_ATTEN	_EMUX_OSS_INITIAL_VOLUME
+#define _EMUX_OSS_RESET_CHANNEL		0x09
+#define _EMUX_OSS_CHANNEL_MODE		0x0a
+#define _EMUX_OSS_DRUM_CHANNELS		0x0b
+#define _EMUX_OSS_MISC_MODE		0x0c
+#define _EMUX_OSS_RELEASE_ALL		0x0d
+#define _EMUX_OSS_NOTEOFF_ALL		0x0e
+#define _EMUX_OSS_CHN_PRESSURE		0x0f
+#define _EMUX_OSS_EQUALIZER		0x11
+
+#define _EMUX_OSS_MODE_FLAG		0x80
+#define _EMUX_OSS_COOKED_FLAG		0x40	/* not supported */
+#define _EMUX_OSS_MODE_VALUE_MASK	0x3F
+
+
+/*
+ * mode type definitions
+ */
+enum {
+/* 0*/	EMUX_MD_EXCLUSIVE_OFF,	/* obsolete */
+/* 1*/	EMUX_MD_EXCLUSIVE_ON,	/* obsolete */
+/* 2*/	EMUX_MD_VERSION,		/* read only */
+/* 3*/	EMUX_MD_EXCLUSIVE_SOUND,	/* 0/1: exclusive note on (default=1) */
+/* 4*/	EMUX_MD_REALTIME_PAN,	/* 0/1: do realtime pan change (default=1) */
+/* 5*/	EMUX_MD_GUS_BANK,	/* bank number for GUS patches (default=0) */
+/* 6*/	EMUX_MD_KEEP_EFFECT,	/* 0/1: keep effect values, (default=0) */
+/* 7*/	EMUX_MD_ZERO_ATTEN,	/* attenuation of max volume (default=32) */
+/* 8*/	EMUX_MD_CHN_PRIOR,	/* 0/1: set MIDI channel priority mode (default=1) */
+/* 9*/	EMUX_MD_MOD_SENSE,	/* integer: modwheel sensitivity (def=18) */
+/*10*/	EMUX_MD_DEF_PRESET,	/* integer: default preset number (def=0) */
+/*11*/	EMUX_MD_DEF_BANK,	/* integer: default bank number (def=0) */
+/*12*/	EMUX_MD_DEF_DRUM,	/* integer: default drumset number (def=0) */
+/*13*/	EMUX_MD_TOGGLE_DRUM_BANK, /* 0/1: toggle drum flag with bank# (def=0) */
+/*14*/	EMUX_MD_NEW_VOLUME_CALC,	/* 0/1: volume calculation mode (def=1) */
+/*15*/	EMUX_MD_CHORUS_MODE,	/* integer: chorus mode (def=2) */
+/*16*/	EMUX_MD_REVERB_MODE,	/* integer: chorus mode (def=4) */
+/*17*/	EMUX_MD_BASS_LEVEL,	/* integer: bass level (def=5) */
+/*18*/	EMUX_MD_TREBLE_LEVEL,	/* integer: treble level (def=9) */
+/*19*/	EMUX_MD_DEBUG_MODE,	/* integer: debug level (def=0) */
+/*20*/	EMUX_MD_PAN_EXCHANGE,	/* 0/1: exchange panning direction (def=0) */
+	EMUX_MD_END,
+};
+
+
+/*
+ * effect parameters
+ */
+enum {
+
+/* modulation envelope parameters */
+/* 0*/	EMUX_FX_ENV1_DELAY,	/* WORD: ENVVAL */
+/* 1*/	EMUX_FX_ENV1_ATTACK,	/* BYTE: up ATKHLD */
+/* 2*/	EMUX_FX_ENV1_HOLD,	/* BYTE: lw ATKHLD */
+/* 3*/	EMUX_FX_ENV1_DECAY,	/* BYTE: lw DCYSUS */
+/* 4*/	EMUX_FX_ENV1_RELEASE,	/* BYTE: lw DCYSUS */
+/* 5*/	EMUX_FX_ENV1_SUSTAIN,	/* BYTE: up DCYSUS */
+/* 6*/	EMUX_FX_ENV1_PITCH,	/* BYTE: up PEFE */
+/* 7*/	EMUX_FX_ENV1_CUTOFF,	/* BYTE: lw PEFE */
+
+/* volume envelope parameters */
+/* 8*/	EMUX_FX_ENV2_DELAY,	/* WORD: ENVVOL */
+/* 9*/	EMUX_FX_ENV2_ATTACK,	/* BYTE: up ATKHLDV */
+/*10*/	EMUX_FX_ENV2_HOLD,	/* BYTE: lw ATKHLDV */
+/*11*/	EMUX_FX_ENV2_DECAY,	/* BYTE: lw DCYSUSV */
+/*12*/	EMUX_FX_ENV2_RELEASE,	/* BYTE: lw DCYSUSV */
+/*13*/	EMUX_FX_ENV2_SUSTAIN,	/* BYTE: up DCYSUSV */
+	
+/* LFO1 (tremolo & vibrato) parameters */
+/*14*/	EMUX_FX_LFO1_DELAY,	/* WORD: LFO1VAL */
+/*15*/	EMUX_FX_LFO1_FREQ,	/* BYTE: lo TREMFRQ */
+/*16*/	EMUX_FX_LFO1_VOLUME,	/* BYTE: up TREMFRQ */
+/*17*/	EMUX_FX_LFO1_PITCH,	/* BYTE: up FMMOD */
+/*18*/	EMUX_FX_LFO1_CUTOFF,	/* BYTE: lo FMMOD */
+
+/* LFO2 (vibrato) parameters */
+/*19*/	EMUX_FX_LFO2_DELAY,	/* WORD: LFO2VAL */
+/*20*/	EMUX_FX_LFO2_FREQ,	/* BYTE: lo FM2FRQ2 */
+/*21*/	EMUX_FX_LFO2_PITCH,	/* BYTE: up FM2FRQ2 */
+
+/* Other overall effect parameters */
+/*22*/	EMUX_FX_INIT_PITCH,	/* SHORT: pitch offset */
+/*23*/	EMUX_FX_CHORUS,		/* BYTE: chorus effects send (0-255) */
+/*24*/	EMUX_FX_REVERB,		/* BYTE: reverb effects send (0-255) */
+/*25*/	EMUX_FX_CUTOFF,		/* BYTE: up IFATN */
+/*26*/	EMUX_FX_FILTERQ,		/* BYTE: up CCCA */
+
+/* Sample / loop offset changes */
+/*27*/	EMUX_FX_SAMPLE_START,	/* SHORT: offset */
+/*28*/	EMUX_FX_LOOP_START,	/* SHORT: offset */
+/*29*/	EMUX_FX_LOOP_END,	/* SHORT: offset */
+/*30*/	EMUX_FX_COARSE_SAMPLE_START,	/* SHORT: upper word offset */
+/*31*/	EMUX_FX_COARSE_LOOP_START,	/* SHORT: upper word offset */
+/*32*/	EMUX_FX_COARSE_LOOP_END,		/* SHORT: upper word offset */
+/*33*/	EMUX_FX_ATTEN,		/* BYTE: lo IFATN */
+
+	EMUX_FX_END,
+};
+/* number of effects */
+#define EMUX_NUM_EFFECTS  EMUX_FX_END
+
+/* effect flag values */
+#define EMUX_FX_FLAG_OFF	0
+#define EMUX_FX_FLAG_SET	1
+#define EMUX_FX_FLAG_ADD	2
+
+
+#endif /* __SOUND_EMUX_LEGACY_H */
diff --git a/include/sound/emux_synth.h b/include/sound/emux_synth.h
new file mode 100644
index 00000000..d8cb51b8
--- /dev/null
+++ b/include/sound/emux_synth.h
@@ -0,0 +1,244 @@
+#ifndef __SOUND_EMUX_SYNTH_H
+#define __SOUND_EMUX_SYNTH_H
+
+/*
+ *  Defines for the Emu-series WaveTable chip
+ *
+ *  Copyright (C) 2000 Takashi Iwai <tiwai@suse.de>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include "seq_kernel.h"
+#include "seq_device.h"
+#include "soundfont.h"
+#include "seq_midi_emul.h"
+#ifdef CONFIG_SND_SEQUENCER_OSS
+#include "seq_oss.h"
+#endif
+#include "emux_legacy.h"
+#include "seq_virmidi.h"
+
+/*
+ * compile flags
+ */
+#define SNDRV_EMUX_USE_RAW_EFFECT
+
+struct snd_emux;
+struct snd_emux_port;
+struct snd_emux_voice;
+struct snd_emux_effect_table;
+
+/*
+ * operators
+ */
+struct snd_emux_operators {
+	struct module *owner;
+	struct snd_emux_voice *(*get_voice)(struct snd_emux *emu,
+					    struct snd_emux_port *port);
+	int (*prepare)(struct snd_emux_voice *vp);
+	void (*trigger)(struct snd_emux_voice *vp);
+	void (*release)(struct snd_emux_voice *vp);
+	void (*update)(struct snd_emux_voice *vp, int update);
+	void (*terminate)(struct snd_emux_voice *vp);
+	void (*free_voice)(struct snd_emux_voice *vp);
+	void (*reset)(struct snd_emux *emu, int ch);
+	/* the first parameters are struct snd_emux */
+	int (*sample_new)(struct snd_emux *emu, struct snd_sf_sample *sp,
+			  struct snd_util_memhdr *hdr,
+			  const void __user *data, long count);
+	int (*sample_free)(struct snd_emux *emu, struct snd_sf_sample *sp,
+			   struct snd_util_memhdr *hdr);
+	void (*sample_reset)(struct snd_emux *emu);
+	int (*load_fx)(struct snd_emux *emu, int type, int arg,
+		       const void __user *data, long count);
+	void (*sysex)(struct snd_emux *emu, char *buf, int len, int parsed,
+		      struct snd_midi_channel_set *chset);
+#ifdef CONFIG_SND_SEQUENCER_OSS
+	int (*oss_ioctl)(struct snd_emux *emu, int cmd, int p1, int p2);
+#endif
+};
+
+
+/*
+ * constant values
+ */
+#define SNDRV_EMUX_MAX_PORTS		32	/* max # of sequencer ports */
+#define SNDRV_EMUX_MAX_VOICES		64	/* max # of voices */
+#define SNDRV_EMUX_MAX_MULTI_VOICES	16	/* max # of playable voices
+						 * simultineously
+						 */
+
+/*
+ * flags
+ */
+#define SNDRV_EMUX_ACCEPT_ROM		(1<<0)
+
+/*
+ * emuX wavetable
+ */
+struct snd_emux {
+
+	struct snd_card *card;	/* assigned card */
+
+	/* following should be initialized before registration */
+	int max_voices;		/* Number of voices */
+	int mem_size;		/* memory size (in byte) */
+	int num_ports;		/* number of ports to be created */
+	int pitch_shift;	/* pitch shift value (for Emu10k1) */
+	struct snd_emux_operators ops;	/* operators */
+	void *hw;		/* hardware */
+	unsigned long flags;	/* other conditions */
+	int midi_ports;		/* number of virtual midi devices */
+	int midi_devidx;	/* device offset of virtual midi */
+	unsigned int linear_panning: 1; /* panning is linear (sbawe = 1, emu10k1 = 0) */
+	int hwdep_idx;		/* hwdep device index */
+	struct snd_hwdep *hwdep;	/* hwdep device */
+
+	/* private */
+	int num_voices;		/* current number of voices */
+	struct snd_sf_list *sflist;	/* root of SoundFont list */
+	struct snd_emux_voice *voices;	/* Voices (EMU 'channel') */
+	int use_time;	/* allocation counter */
+	spinlock_t voice_lock;	/* Lock for voice access */
+	struct mutex register_mutex;
+	int client;		/* For the sequencer client */
+	int ports[SNDRV_EMUX_MAX_PORTS];	/* The ports for this device */
+	struct snd_emux_port *portptrs[SNDRV_EMUX_MAX_PORTS];
+	int used;	/* use counter */
+	char *name;	/* name of the device (internal) */
+	struct snd_rawmidi **vmidi;
+	struct timer_list tlist;	/* for pending note-offs */
+	int timer_active;
+
+	struct snd_util_memhdr *memhdr;	/* memory chunk information */
+
+#ifdef CONFIG_PROC_FS
+	struct snd_info_entry *proc;
+#endif
+
+#ifdef CONFIG_SND_SEQUENCER_OSS
+	struct snd_seq_device *oss_synth;
+#endif
+};
+
+
+/*
+ * sequencer port information
+ */
+struct snd_emux_port {
+
+	struct snd_midi_channel_set chset;
+	struct snd_emux *emu;
+
+	char port_mode;			/* operation mode */
+	int volume_atten;		/* emuX raw attenuation */
+	unsigned long drum_flags;	/* drum bitmaps */
+	int ctrls[EMUX_MD_END];		/* control parameters */
+#ifdef SNDRV_EMUX_USE_RAW_EFFECT
+	struct snd_emux_effect_table *effect;
+#endif
+#ifdef CONFIG_SND_SEQUENCER_OSS
+	struct snd_seq_oss_arg *oss_arg;
+#endif
+};
+
+/* port_mode */
+#define SNDRV_EMUX_PORT_MODE_MIDI		0	/* normal MIDI port */
+#define SNDRV_EMUX_PORT_MODE_OSS_SYNTH	1	/* OSS synth port */
+#define SNDRV_EMUX_PORT_MODE_OSS_MIDI	2	/* OSS multi channel synth port */
+
+/*
+ * A structure to keep track of each hardware voice
+ */
+struct snd_emux_voice {
+	int  ch;		/* Hardware channel number */
+
+	int  state;		/* status */
+#define SNDRV_EMUX_ST_OFF		0x00	/* Not playing, and inactive */
+#define SNDRV_EMUX_ST_ON		0x01	/* Note on */
+#define SNDRV_EMUX_ST_RELEASED 	(0x02|SNDRV_EMUX_ST_ON)	/* Note released */
+#define SNDRV_EMUX_ST_SUSTAINED	(0x04|SNDRV_EMUX_ST_ON)	/* Note sustained */
+#define SNDRV_EMUX_ST_STANDBY	(0x08|SNDRV_EMUX_ST_ON)	/* Waiting to be triggered */
+#define SNDRV_EMUX_ST_PENDING 	(0x10|SNDRV_EMUX_ST_ON)	/* Note will be released */
+#define SNDRV_EMUX_ST_LOCKED		0x100	/* Not accessible */
+
+	unsigned int  time;	/* An allocation time */
+	unsigned char note;	/* Note currently assigned to this voice */
+	unsigned char key;
+	unsigned char velocity;	/* Velocity of current note */
+
+	struct snd_sf_zone *zone;	/* Zone assigned to this note */
+	void *block;		/* sample block pointer (optional) */
+	struct snd_midi_channel *chan;	/* Midi channel for this note */
+	struct snd_emux_port *port;	/* associated port */
+	struct snd_emux *emu;	/* assigned root info */
+	void *hw;		/* hardware pointer (emu8000 or emu10k1) */
+	unsigned long ontime;	/* jiffies at note triggered */
+	
+	/* Emu8k/Emu10k1 registers */
+	struct soundfont_voice_info reg;
+
+	/* additional registers */
+	int avol;		/* volume attenuation */
+	int acutoff;		/* cutoff target */
+	int apitch;		/* pitch offset */
+	int apan;		/* pan/aux pair */
+	int aaux;
+	int ptarget;		/* pitch target */
+	int vtarget;		/* volume target */
+	int ftarget;		/* filter target */
+
+};
+
+/*
+ * update flags (can be combined)
+ */
+#define SNDRV_EMUX_UPDATE_VOLUME		(1<<0)
+#define SNDRV_EMUX_UPDATE_PITCH		(1<<1)
+#define SNDRV_EMUX_UPDATE_PAN		(1<<2)
+#define SNDRV_EMUX_UPDATE_FMMOD		(1<<3)
+#define SNDRV_EMUX_UPDATE_TREMFREQ	(1<<4)
+#define SNDRV_EMUX_UPDATE_FM2FRQ2		(1<<5)
+#define SNDRV_EMUX_UPDATE_Q		(1<<6)
+
+
+#ifdef SNDRV_EMUX_USE_RAW_EFFECT
+/*
+ * effect table
+ */
+struct snd_emux_effect_table {
+	/* Emu8000 specific effects */
+	short val[EMUX_NUM_EFFECTS];
+	unsigned char flag[EMUX_NUM_EFFECTS];
+};
+#endif /* SNDRV_EMUX_USE_RAW_EFFECT */
+
+
+/*
+ * prototypes - interface to Emu10k1 and Emu8k routines
+ */
+int snd_emux_new(struct snd_emux **remu);
+int snd_emux_register(struct snd_emux *emu, struct snd_card *card, int index, char *name);
+int snd_emux_free(struct snd_emux *emu);
+
+/*
+ * exported functions
+ */
+void snd_emux_terminate_all(struct snd_emux *emu);
+void snd_emux_lock_voice(struct snd_emux *emu, int voice);
+void snd_emux_unlock_voice(struct snd_emux *emu, int voice);
+
+#endif /* __SOUND_EMUX_SYNTH_H */
diff --git a/include/sound/es1688.h b/include/sound/es1688.h
new file mode 100644
index 00000000..3ec7ecbe
--- /dev/null
+++ b/include/sound/es1688.h
@@ -0,0 +1,122 @@
+#ifndef __SOUND_ES1688_H
+#define __SOUND_ES1688_H
+
+/*
+ *  Header file for ES488/ES1688
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include "control.h"
+#include "pcm.h"
+#include <linux/interrupt.h>
+
+#define ES1688_HW_AUTO		0x0000
+#define ES1688_HW_688		0x0001
+#define ES1688_HW_1688		0x0002
+
+struct snd_es1688 {
+	unsigned long port;		/* port of ESS chip */
+	struct resource *res_port;
+	unsigned long mpu_port;		/* MPU-401 port of ESS chip */
+	int irq;			/* IRQ number of ESS chip */
+	int mpu_irq;			/* MPU IRQ */
+	int dma8;			/* 8-bit DMA */
+	unsigned short version;		/* version of ESS chip */
+	unsigned short hardware;	/* see to ES1688_HW_XXXX */
+
+	unsigned short trigger_value;
+	unsigned char pad;
+	unsigned int dma_size;
+
+	struct snd_pcm *pcm;
+	struct snd_pcm_substream *playback_substream;
+	struct snd_pcm_substream *capture_substream;
+
+	spinlock_t reg_lock;
+	spinlock_t mixer_lock;
+};
+
+/* I/O ports */
+
+#define ES1688P(codec, x) ((codec)->port + e_s_s_ESS1688##x)
+
+#define e_s_s_ESS1688RESET	0x6
+#define e_s_s_ESS1688READ	0xa
+#define e_s_s_ESS1688WRITE	0xc
+#define e_s_s_ESS1688COMMAND	0xc
+#define e_s_s_ESS1688STATUS	0xc
+#define e_s_s_ESS1688DATA_AVAIL	0xe
+#define e_s_s_ESS1688DATA_AVAIL_16 0xf
+#define e_s_s_ESS1688MIXER_ADDR	0x4
+#define e_s_s_ESS1688MIXER_DATA	0x5
+#define e_s_s_ESS1688OPL3_LEFT	0x0
+#define e_s_s_ESS1688OPL3_RIGHT	0x2
+#define e_s_s_ESS1688OPL3_BOTH	0x8
+#define e_s_s_ESS1688ENABLE0	0x0
+#define e_s_s_ESS1688ENABLE1	0x9
+#define e_s_s_ESS1688ENABLE2	0xb
+#define e_s_s_ESS1688INIT1	0x7
+
+#define ES1688_DSP_CMD_DMAOFF	0xd0
+#define ES1688_DSP_CMD_SPKON	0xd1
+#define ES1688_DSP_CMD_SPKOFF	0xd3
+#define ES1688_DSP_CMD_DMAON	0xd4
+
+#define ES1688_PCM_DEV		0x14
+#define ES1688_MIC_DEV		0x1a
+#define ES1688_REC_DEV		0x1c
+#define ES1688_MASTER_DEV	0x32
+#define ES1688_FM_DEV		0x36
+#define ES1688_CD_DEV		0x38
+#define ES1688_AUX_DEV		0x3a
+#define ES1688_SPEAKER_DEV	0x3c
+#define ES1688_LINE_DEV		0x3e
+#define ES1688_RECLEV_DEV	0xb4
+
+#define ES1688_MIXS_MASK	0x17
+#define ES1688_MIXS_MIC		0x00
+#define ES1688_MIXS_MIC_MASTER	0x01
+#define ES1688_MIXS_CD		0x02
+#define ES1688_MIXS_AOUT	0x03
+#define ES1688_MIXS_MIC1	0x04
+#define ES1688_MIXS_REC_MIX	0x05
+#define ES1688_MIXS_LINE	0x06
+#define ES1688_MIXS_MASTER	0x07
+#define ES1688_MIXS_MUTE	0x10
+
+/*
+
+ */
+
+void snd_es1688_mixer_write(struct snd_es1688 *chip, unsigned char reg, unsigned char data);
+
+int snd_es1688_create(struct snd_card *card,
+		      struct snd_es1688 *chip,
+		      unsigned long port,
+		      unsigned long mpu_port,
+		      int irq,
+		      int mpu_irq,
+		      int dma8,
+		      unsigned short hardware);
+int snd_es1688_pcm(struct snd_card *card, struct snd_es1688 *chip, int device,
+		   struct snd_pcm **rpcm);
+int snd_es1688_mixer(struct snd_card *card, struct snd_es1688 *chip);
+int snd_es1688_reset(struct snd_es1688 *chip);
+
+#endif /* __SOUND_ES1688_H */
diff --git a/include/sound/gus.h b/include/sound/gus.h
new file mode 100644
index 00000000..841bb8df
--- /dev/null
+++ b/include/sound/gus.h
@@ -0,0 +1,631 @@
+#ifndef __SOUND_GUS_H
+#define __SOUND_GUS_H
+
+/*
+ *  Global structures used for GUS part of ALSA driver
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include "pcm.h"
+#include "rawmidi.h"
+#include "timer.h"
+#include "seq_midi_emul.h"
+#include "seq_device.h"
+#include <asm/io.h>
+
+/* IO ports */
+
+#define GUSP(gus, x)			((gus)->gf1.port + SNDRV_g_u_s_##x)
+
+#define SNDRV_g_u_s_MIDICTRL		(0x320-0x220)
+#define SNDRV_g_u_s_MIDISTAT		(0x320-0x220)
+#define SNDRV_g_u_s_MIDIDATA		(0x321-0x220)
+
+#define SNDRV_g_u_s_GF1PAGE		(0x322-0x220)
+#define SNDRV_g_u_s_GF1REGSEL		(0x323-0x220)
+#define SNDRV_g_u_s_GF1DATALOW		(0x324-0x220)
+#define SNDRV_g_u_s_GF1DATAHIGH		(0x325-0x220)
+#define SNDRV_g_u_s_IRQSTAT		(0x226-0x220)
+#define SNDRV_g_u_s_TIMERCNTRL		(0x228-0x220)
+#define SNDRV_g_u_s_TIMERDATA		(0x229-0x220)
+#define SNDRV_g_u_s_DRAM		(0x327-0x220)
+#define SNDRV_g_u_s_MIXCNTRLREG		(0x220-0x220)
+#define SNDRV_g_u_s_IRQDMACNTRLREG	(0x22b-0x220)
+#define SNDRV_g_u_s_REGCNTRLS		(0x22f-0x220)
+#define SNDRV_g_u_s_BOARDVERSION	(0x726-0x220)
+#define SNDRV_g_u_s_MIXCNTRLPORT	(0x726-0x220)
+#define SNDRV_g_u_s_IVER		(0x325-0x220)
+#define SNDRV_g_u_s_MIXDATAPORT		(0x326-0x220)
+#define SNDRV_g_u_s_MAXCNTRLPORT	(0x326-0x220)
+
+/* GF1 registers */
+
+/* global registers */
+#define SNDRV_GF1_GB_ACTIVE_VOICES		0x0e
+#define SNDRV_GF1_GB_VOICES_IRQ			0x0f
+#define SNDRV_GF1_GB_GLOBAL_MODE		0x19
+#define SNDRV_GF1_GW_LFO_BASE			0x1a
+#define SNDRV_GF1_GB_VOICES_IRQ_READ		0x1f
+#define SNDRV_GF1_GB_DRAM_DMA_CONTROL		0x41
+#define SNDRV_GF1_GW_DRAM_DMA_LOW		0x42
+#define SNDRV_GF1_GW_DRAM_IO_LOW		0x43
+#define SNDRV_GF1_GB_DRAM_IO_HIGH		0x44
+#define SNDRV_GF1_GB_SOUND_BLASTER_CONTROL	0x45
+#define SNDRV_GF1_GB_ADLIB_TIMER_1		0x46
+#define SNDRV_GF1_GB_ADLIB_TIMER_2		0x47
+#define SNDRV_GF1_GB_RECORD_RATE		0x48
+#define SNDRV_GF1_GB_REC_DMA_CONTROL		0x49
+#define SNDRV_GF1_GB_JOYSTICK_DAC_LEVEL		0x4b
+#define SNDRV_GF1_GB_RESET			0x4c
+#define SNDRV_GF1_GB_DRAM_DMA_HIGH		0x50
+#define SNDRV_GF1_GW_DRAM_IO16			0x51
+#define SNDRV_GF1_GW_MEMORY_CONFIG		0x52
+#define SNDRV_GF1_GB_MEMORY_CONTROL		0x53
+#define SNDRV_GF1_GW_FIFO_RECORD_BASE_ADDR	0x54
+#define SNDRV_GF1_GW_FIFO_PLAY_BASE_ADDR	0x55
+#define SNDRV_GF1_GW_FIFO_SIZE			0x56
+#define SNDRV_GF1_GW_INTERLEAVE			0x57
+#define SNDRV_GF1_GB_COMPATIBILITY		0x59
+#define SNDRV_GF1_GB_DECODE_CONTROL		0x5a
+#define SNDRV_GF1_GB_VERSION_NUMBER		0x5b
+#define SNDRV_GF1_GB_MPU401_CONTROL_A		0x5c
+#define SNDRV_GF1_GB_MPU401_CONTROL_B		0x5d
+#define SNDRV_GF1_GB_EMULATION_IRQ		0x60
+/* voice specific registers */
+#define SNDRV_GF1_VB_ADDRESS_CONTROL		0x00
+#define SNDRV_GF1_VW_FREQUENCY			0x01
+#define SNDRV_GF1_VW_START_HIGH			0x02
+#define SNDRV_GF1_VW_START_LOW			0x03
+#define SNDRV_GF1_VA_START			SNDRV_GF1_VW_START_HIGH
+#define SNDRV_GF1_VW_END_HIGH			0x04
+#define SNDRV_GF1_VW_END_LOW			0x05
+#define SNDRV_GF1_VA_END			SNDRV_GF1_VW_END_HIGH
+#define SNDRV_GF1_VB_VOLUME_RATE		0x06
+#define SNDRV_GF1_VB_VOLUME_START		0x07
+#define SNDRV_GF1_VB_VOLUME_END			0x08
+#define SNDRV_GF1_VW_VOLUME			0x09
+#define SNDRV_GF1_VW_CURRENT_HIGH		0x0a
+#define SNDRV_GF1_VW_CURRENT_LOW		0x0b
+#define SNDRV_GF1_VA_CURRENT			SNDRV_GF1_VW_CURRENT_HIGH
+#define SNDRV_GF1_VB_PAN			0x0c
+#define SNDRV_GF1_VW_OFFSET_RIGHT		0x0c
+#define SNDRV_GF1_VB_VOLUME_CONTROL		0x0d
+#define SNDRV_GF1_VB_UPPER_ADDRESS		0x10
+#define SNDRV_GF1_VW_EFFECT_HIGH		0x11
+#define SNDRV_GF1_VW_EFFECT_LOW			0x12
+#define SNDRV_GF1_VA_EFFECT			SNDRV_GF1_VW_EFFECT_HIGH
+#define SNDRV_GF1_VW_OFFSET_LEFT		0x13
+#define SNDRV_GF1_VB_ACCUMULATOR		0x14
+#define SNDRV_GF1_VB_MODE			0x15
+#define SNDRV_GF1_VW_EFFECT_VOLUME		0x16
+#define SNDRV_GF1_VB_FREQUENCY_LFO		0x17
+#define SNDRV_GF1_VB_VOLUME_LFO			0x18
+#define SNDRV_GF1_VW_OFFSET_RIGHT_FINAL		0x1b
+#define SNDRV_GF1_VW_OFFSET_LEFT_FINAL		0x1c
+#define SNDRV_GF1_VW_EFFECT_VOLUME_FINAL	0x1d
+
+/* ICS registers */
+
+#define SNDRV_ICS_MIC_DEV		0
+#define SNDRV_ICS_LINE_DEV		1
+#define SNDRV_ICS_CD_DEV		2
+#define SNDRV_ICS_GF1_DEV		3
+#define SNDRV_ICS_NONE_DEV		4
+#define SNDRV_ICS_MASTER_DEV		5
+
+/* LFO */
+
+#define SNDRV_LFO_TREMOLO		0
+#define SNDRV_LFO_VIBRATO		1
+
+/* misc */
+
+#define SNDRV_GF1_DMA_UNSIGNED	0x80
+#define SNDRV_GF1_DMA_16BIT	0x40
+#define SNDRV_GF1_DMA_IRQ	0x20
+#define SNDRV_GF1_DMA_WIDTH16	0x04
+#define SNDRV_GF1_DMA_READ	0x02	/* read from GUS's DRAM */
+#define SNDRV_GF1_DMA_ENABLE	0x01
+
+/* ramp ranges */
+
+#define SNDRV_GF1_ATTEN(x)	(snd_gf1_atten_table[x])
+#define SNDRV_GF1_MIN_VOLUME	1800
+#define SNDRV_GF1_MAX_VOLUME	4095
+#define SNDRV_GF1_MIN_OFFSET	(SNDRV_GF1_MIN_VOLUME>>4)
+#define SNDRV_GF1_MAX_OFFSET	255
+#define SNDRV_GF1_MAX_TDEPTH	90
+
+/* defines for memory manager */
+
+#define SNDRV_GF1_MEM_BLOCK_16BIT	0x0001
+
+#define SNDRV_GF1_MEM_OWNER_DRIVER	0x0001
+#define SNDRV_GF1_MEM_OWNER_WAVE_SIMPLE	0x0002
+#define SNDRV_GF1_MEM_OWNER_WAVE_GF1	0x0003
+#define SNDRV_GF1_MEM_OWNER_WAVE_IWFFFF	0x0004
+
+/* constants for interrupt handlers */
+
+#define SNDRV_GF1_HANDLER_MIDI_OUT	0x00010000
+#define SNDRV_GF1_HANDLER_MIDI_IN	0x00020000
+#define SNDRV_GF1_HANDLER_TIMER1	0x00040000
+#define SNDRV_GF1_HANDLER_TIMER2	0x00080000
+#define SNDRV_GF1_HANDLER_VOICE		0x00100000
+#define SNDRV_GF1_HANDLER_DMA_WRITE	0x00200000
+#define SNDRV_GF1_HANDLER_DMA_READ	0x00400000
+#define SNDRV_GF1_HANDLER_ALL		(0xffff0000&~SNDRV_GF1_HANDLER_VOICE)
+
+/* constants for DMA flags */
+
+#define SNDRV_GF1_DMA_TRIGGER		1
+
+/* --- */
+
+struct snd_gus_card;
+
+/* GF1 specific structure */
+
+struct snd_gf1_bank_info {
+	unsigned int address;
+	unsigned int size;
+};
+
+struct snd_gf1_mem_block {
+	unsigned short flags;	/* flags - SNDRV_GF1_MEM_BLOCK_XXXX */
+	unsigned short owner;	/* owner - SNDRV_GF1_MEM_OWNER_XXXX */
+	unsigned int share;	/* share count */
+	unsigned int share_id[4]; /* share ID */
+	unsigned int ptr;
+	unsigned int size;
+	char *name;
+	struct snd_gf1_mem_block *next;
+	struct snd_gf1_mem_block *prev;
+};
+
+struct snd_gf1_mem {
+	struct snd_gf1_bank_info banks_8[4];
+	struct snd_gf1_bank_info banks_16[4];
+	struct snd_gf1_mem_block *first;
+	struct snd_gf1_mem_block *last;
+	struct mutex memory_mutex;
+};
+
+struct snd_gf1_dma_block {
+	void *buffer;		/* buffer in computer's RAM */
+	unsigned long buf_addr;	/* buffer address */
+	unsigned int addr;	/* address in onboard memory */
+	unsigned int count;	/* count in bytes */
+	unsigned int cmd;	/* DMA command (format) */
+	void (*ack)(struct snd_gus_card * gus, void *private_data);
+	void *private_data;
+	struct snd_gf1_dma_block *next;
+};
+
+struct snd_gus_port {
+	struct snd_midi_channel_set * chset;
+	struct snd_gus_card * gus;
+	int mode;		/* operation mode */
+	int client;		/* sequencer client number */
+	int port;		/* sequencer port number */
+	unsigned int midi_has_voices: 1;
+};
+
+struct snd_gus_voice;
+
+#define SNDRV_GF1_VOICE_TYPE_PCM	0
+#define SNDRV_GF1_VOICE_TYPE_SYNTH 	1
+#define SNDRV_GF1_VOICE_TYPE_MIDI	2
+
+#define SNDRV_GF1_VFLG_RUNNING		(1<<0)
+#define SNDRV_GF1_VFLG_EFFECT_TIMER1	(1<<1)
+#define SNDRV_GF1_VFLG_PAN		(1<<2)
+
+enum snd_gus_volume_state {
+	VENV_BEFORE,
+	VENV_ATTACK,
+	VENV_SUSTAIN,
+	VENV_RELEASE,
+	VENV_DONE,
+	VENV_VOLUME
+};
+
+struct snd_gus_voice {
+	int number;
+	unsigned int use: 1,
+	    pcm: 1,
+	    synth:1,
+	    midi: 1;
+	unsigned int flags;
+	unsigned char client;
+	unsigned char port;
+	unsigned char index;
+	unsigned char pad;
+	
+#ifdef CONFIG_SND_DEBUG
+	unsigned int interrupt_stat_wave;
+	unsigned int interrupt_stat_volume;
+#endif
+	void (*handler_wave) (struct snd_gus_card * gus, struct snd_gus_voice * voice);
+	void (*handler_volume) (struct snd_gus_card * gus, struct snd_gus_voice * voice);
+	void (*handler_effect) (struct snd_gus_card * gus, struct snd_gus_voice * voice);
+	void (*volume_change) (struct snd_gus_card * gus);
+
+	struct snd_gus_sample_ops *sample_ops;
+
+	/* running status / registers */
+
+	unsigned short fc_register;
+	unsigned short fc_lfo;
+	unsigned short gf1_volume;
+	unsigned char control;
+	unsigned char mode;
+	unsigned char gf1_pan;
+	unsigned char effect_accumulator;
+	unsigned char volume_control;
+	unsigned char venv_value_next;
+	enum snd_gus_volume_state venv_state;
+	enum snd_gus_volume_state venv_state_prev;
+	unsigned short vlo;
+	unsigned short vro;
+	unsigned short gf1_effect_volume;
+	
+	/* --- */
+
+	void *private_data;
+	void (*private_free)(struct snd_gus_voice *voice);
+};
+
+struct snd_gf1 {
+
+	unsigned int enh_mode:1,	/* enhanced mode (GFA1) */
+		     hw_lfo:1,		/* use hardware LFO */
+		     sw_lfo:1,		/* use software LFO */
+		     effect:1;		/* use effect voices */
+
+	unsigned long port;		/* port of GF1 chip */
+	struct resource *res_port1;
+	struct resource *res_port2;
+	int irq;			/* IRQ number */
+	int dma1;			/* DMA1 number */
+	int dma2;			/* DMA2 number */
+	unsigned int memory;		/* GUS's DRAM size in bytes */
+	unsigned int rom_memory;	/* GUS's ROM size in bytes */
+	unsigned int rom_present;	/* bitmask */
+	unsigned int rom_banks;		/* GUS's ROM banks */
+
+	struct snd_gf1_mem mem_alloc;
+
+	/* registers */
+	unsigned short reg_page;
+	unsigned short reg_regsel;
+	unsigned short reg_data8;
+	unsigned short reg_data16;
+	unsigned short reg_irqstat;
+	unsigned short reg_dram;
+	unsigned short reg_timerctrl;
+	unsigned short reg_timerdata;
+	unsigned char ics_regs[6][2];
+	/* --------- */
+
+	unsigned char active_voices;	/* active voices */
+	unsigned char active_voice;	/* selected voice (GF1PAGE register) */
+
+	struct snd_gus_voice voices[32];	/* GF1 voices */
+
+	unsigned int default_voice_address;
+
+	unsigned short playback_freq;	/* GF1 playback (mixing) frequency */
+	unsigned short mode;		/* see to SNDRV_GF1_MODE_XXXX */
+	unsigned char volume_ramp;
+	unsigned char smooth_pan;
+	unsigned char full_range_pan;
+	unsigned char pad0;
+
+	unsigned char *lfos;
+
+	/* interrupt handlers */
+
+	void (*interrupt_handler_midi_out) (struct snd_gus_card * gus);
+	void (*interrupt_handler_midi_in) (struct snd_gus_card * gus);
+	void (*interrupt_handler_timer1) (struct snd_gus_card * gus);
+	void (*interrupt_handler_timer2) (struct snd_gus_card * gus);
+	void (*interrupt_handler_dma_write) (struct snd_gus_card * gus);
+	void (*interrupt_handler_dma_read) (struct snd_gus_card * gus);
+
+#ifdef CONFIG_SND_DEBUG
+	unsigned int interrupt_stat_midi_out;
+	unsigned int interrupt_stat_midi_in;
+	unsigned int interrupt_stat_timer1;
+	unsigned int interrupt_stat_timer2;
+	unsigned int interrupt_stat_dma_write;
+	unsigned int interrupt_stat_dma_read;
+	unsigned int interrupt_stat_voice_lost;
+#endif
+
+	/* synthesizer */
+
+	int seq_client;
+	struct snd_gus_port seq_ports[4];
+
+	/* timer */
+
+	unsigned short timer_enabled;
+	struct snd_timer *timer1;
+	struct snd_timer *timer2;
+
+	/* midi */
+
+	unsigned short uart_cmd;
+	unsigned int uart_framing;
+	unsigned int uart_overrun;
+
+	/* dma operations */
+
+	unsigned int dma_flags;
+	unsigned int dma_shared;
+	struct snd_gf1_dma_block *dma_data_pcm;
+	struct snd_gf1_dma_block *dma_data_pcm_last;
+	struct snd_gf1_dma_block *dma_data_synth;
+	struct snd_gf1_dma_block *dma_data_synth_last;
+	void (*dma_ack)(struct snd_gus_card * gus, void *private_data);
+	void *dma_private_data;
+
+	/* pcm */
+	int pcm_channels;
+	int pcm_alloc_voices;
+        unsigned short pcm_volume_level_left;
+	unsigned short pcm_volume_level_right;
+	unsigned short pcm_volume_level_left1;
+	unsigned short pcm_volume_level_right1;
+                                
+	unsigned char pcm_rcntrl_reg;
+	unsigned char pad_end;
+};
+
+/* main structure for GUS card */
+
+struct snd_gus_card {
+	struct snd_card *card;
+
+	unsigned int
+	 initialized: 1,		/* resources were initialized */
+	 equal_irq:1,			/* GF1 and CODEC shares IRQ (GUS MAX only) */
+	 equal_dma:1,			/* if dma channels are equal (not valid for daughter board) */
+	 ics_flag:1,			/* have we ICS mixer chip */
+	 ics_flipped:1,			/* ICS mixer have flipped some channels? */
+	 codec_flag:1,			/* have we CODEC chip? */
+	 max_flag:1,			/* have we GUS MAX card? */
+	 max_ctrl_flag:1,		/* have we original GUS MAX card? */
+	 daughter_flag:1,		/* have we daughter board? */
+	 interwave:1,			/* hey - we have InterWave card */
+	 ess_flag:1,			/* ESS chip found... GUS Extreme */
+	 ace_flag:1,			/* GUS ACE detected */
+	 uart_enable:1;			/* enable MIDI UART */
+	unsigned short revision;	/* revision of chip */
+	unsigned short max_cntrl_val;	/* GUS MAX control value */
+	unsigned short mix_cntrl_reg;	/* mixer control register */
+	unsigned short joystick_dac;	/* joystick DAC level */
+	int timer_dev;			/* timer device */
+
+	struct snd_gf1 gf1;	/* gf1 specific variables */
+	struct snd_pcm *pcm;
+	struct snd_pcm_substream *pcm_cap_substream;
+	unsigned int c_dma_size;
+	unsigned int c_period_size;
+	unsigned int c_pos;
+
+	struct snd_rawmidi *midi_uart;
+	struct snd_rawmidi_substream *midi_substream_output;
+	struct snd_rawmidi_substream *midi_substream_input;
+
+	spinlock_t reg_lock;
+	spinlock_t voice_alloc;
+	spinlock_t active_voice_lock;
+	spinlock_t event_lock;
+	spinlock_t dma_lock;
+	spinlock_t pcm_volume_level_lock;
+	spinlock_t uart_cmd_lock;
+	struct mutex dma_mutex;
+	struct mutex register_mutex;
+};
+
+/* I/O functions for GF1/InterWave chip - gus_io.c */
+
+static inline void snd_gf1_select_voice(struct snd_gus_card * gus, int voice)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&gus->active_voice_lock, flags);
+	if (voice != gus->gf1.active_voice) {
+		gus->gf1.active_voice = voice;
+		outb(voice, GUSP(gus, GF1PAGE));
+	}
+	spin_unlock_irqrestore(&gus->active_voice_lock, flags);
+}
+
+static inline void snd_gf1_uart_cmd(struct snd_gus_card * gus, unsigned char b)
+{
+	outb(gus->gf1.uart_cmd = b, GUSP(gus, MIDICTRL));
+}
+
+static inline unsigned char snd_gf1_uart_stat(struct snd_gus_card * gus)
+{
+	return inb(GUSP(gus, MIDISTAT));
+}
+
+static inline void snd_gf1_uart_put(struct snd_gus_card * gus, unsigned char b)
+{
+	outb(b, GUSP(gus, MIDIDATA));
+}
+
+static inline unsigned char snd_gf1_uart_get(struct snd_gus_card * gus)
+{
+	return inb(GUSP(gus, MIDIDATA));
+}
+
+extern void snd_gf1_delay(struct snd_gus_card * gus);
+
+extern void snd_gf1_ctrl_stop(struct snd_gus_card * gus, unsigned char reg);
+
+extern void snd_gf1_write8(struct snd_gus_card * gus, unsigned char reg, unsigned char data);
+extern unsigned char snd_gf1_look8(struct snd_gus_card * gus, unsigned char reg);
+static inline unsigned char snd_gf1_read8(struct snd_gus_card * gus, unsigned char reg)
+{
+	return snd_gf1_look8(gus, reg | 0x80);
+}
+extern void snd_gf1_write16(struct snd_gus_card * gus, unsigned char reg, unsigned int data);
+extern unsigned short snd_gf1_look16(struct snd_gus_card * gus, unsigned char reg);
+static inline unsigned short snd_gf1_read16(struct snd_gus_card * gus, unsigned char reg)
+{
+	return snd_gf1_look16(gus, reg | 0x80);
+}
+extern void snd_gf1_adlib_write(struct snd_gus_card * gus, unsigned char reg, unsigned char data);
+extern void snd_gf1_dram_addr(struct snd_gus_card * gus, unsigned int addr);
+extern void snd_gf1_poke(struct snd_gus_card * gus, unsigned int addr, unsigned char data);
+extern unsigned char snd_gf1_peek(struct snd_gus_card * gus, unsigned int addr);
+extern void snd_gf1_write_addr(struct snd_gus_card * gus, unsigned char reg, unsigned int addr, short w_16bit);
+extern unsigned int snd_gf1_read_addr(struct snd_gus_card * gus, unsigned char reg, short w_16bit);
+extern void snd_gf1_i_ctrl_stop(struct snd_gus_card * gus, unsigned char reg);
+extern void snd_gf1_i_write8(struct snd_gus_card * gus, unsigned char reg, unsigned char data);
+extern unsigned char snd_gf1_i_look8(struct snd_gus_card * gus, unsigned char reg);
+extern void snd_gf1_i_write16(struct snd_gus_card * gus, unsigned char reg, unsigned int data);
+static inline unsigned char snd_gf1_i_read8(struct snd_gus_card * gus, unsigned char reg)
+{
+	return snd_gf1_i_look8(gus, reg | 0x80);
+}
+extern unsigned short snd_gf1_i_look16(struct snd_gus_card * gus, unsigned char reg);
+static inline unsigned short snd_gf1_i_read16(struct snd_gus_card * gus, unsigned char reg)
+{
+	return snd_gf1_i_look16(gus, reg | 0x80);
+}
+
+extern void snd_gf1_select_active_voices(struct snd_gus_card * gus);
+
+/* gus_lfo.c */
+
+struct _SND_IW_LFO_PROGRAM {
+	unsigned short freq_and_control;
+	unsigned char depth_final;
+	unsigned char depth_inc;
+	unsigned short twave;
+	unsigned short depth;
+};
+
+#if 0
+extern irqreturn_t snd_gf1_lfo_effect_interrupt(struct snd_gus_card * gus, snd_gf1_voice_t * voice);
+#endif
+extern void snd_gf1_lfo_init(struct snd_gus_card * gus);
+extern void snd_gf1_lfo_done(struct snd_gus_card * gus);
+extern void snd_gf1_lfo_program(struct snd_gus_card * gus, int voice, int lfo_type, struct _SND_IW_LFO_PROGRAM *program);
+extern void snd_gf1_lfo_enable(struct snd_gus_card * gus, int voice, int lfo_type);
+extern void snd_gf1_lfo_disable(struct snd_gus_card * gus, int voice, int lfo_type);
+extern void snd_gf1_lfo_change_freq(struct snd_gus_card * gus, int voice, int lfo_type, int freq);
+extern void snd_gf1_lfo_change_depth(struct snd_gus_card * gus, int voice, int lfo_type, int depth);
+extern void snd_gf1_lfo_setup(struct snd_gus_card * gus, int voice, int lfo_type, int freq, int current_depth, int depth, int sweep, int shape);
+extern void snd_gf1_lfo_shutdown(struct snd_gus_card * gus, int voice, int lfo_type);
+#if 0
+extern void snd_gf1_lfo_command(struct snd_gus_card * gus, int voice, unsigned char *command);
+#endif
+
+/* gus_mem.c */
+
+void snd_gf1_mem_lock(struct snd_gf1_mem * alloc, int xup);
+int snd_gf1_mem_xfree(struct snd_gf1_mem * alloc, struct snd_gf1_mem_block * block);
+struct snd_gf1_mem_block *snd_gf1_mem_alloc(struct snd_gf1_mem * alloc, int owner,
+				       char *name, int size, int w_16,
+				       int align, unsigned int *share_id);
+int snd_gf1_mem_free(struct snd_gf1_mem * alloc, unsigned int address);
+int snd_gf1_mem_free_owner(struct snd_gf1_mem * alloc, int owner);
+int snd_gf1_mem_init(struct snd_gus_card * gus);
+int snd_gf1_mem_done(struct snd_gus_card * gus);
+
+/* gus_mem_proc.c */
+
+int snd_gf1_mem_proc_init(struct snd_gus_card * gus);
+
+/* gus_dma.c */
+
+int snd_gf1_dma_init(struct snd_gus_card * gus);
+int snd_gf1_dma_done(struct snd_gus_card * gus);
+int snd_gf1_dma_transfer_block(struct snd_gus_card * gus,
+			       struct snd_gf1_dma_block * block,
+			       int atomic,
+			       int synth);
+
+/* gus_volume.c */
+
+unsigned short snd_gf1_lvol_to_gvol_raw(unsigned int vol);
+unsigned short snd_gf1_translate_freq(struct snd_gus_card * gus, unsigned int freq2);
+
+/* gus_reset.c */
+
+void snd_gf1_set_default_handlers(struct snd_gus_card * gus, unsigned int what);
+void snd_gf1_smart_stop_voice(struct snd_gus_card * gus, unsigned short voice);
+void snd_gf1_stop_voice(struct snd_gus_card * gus, unsigned short voice);
+void snd_gf1_stop_voices(struct snd_gus_card * gus, unsigned short v_min, unsigned short v_max);
+struct snd_gus_voice *snd_gf1_alloc_voice(struct snd_gus_card * gus, int type, int client, int port);
+void snd_gf1_free_voice(struct snd_gus_card * gus, struct snd_gus_voice *voice);
+int snd_gf1_start(struct snd_gus_card * gus);
+int snd_gf1_stop(struct snd_gus_card * gus);
+
+/* gus_mixer.c */
+
+int snd_gf1_new_mixer(struct snd_gus_card * gus);
+
+/* gus_pcm.c */
+
+int snd_gf1_pcm_new(struct snd_gus_card * gus, int pcm_dev, int control_index, struct snd_pcm ** rpcm);
+
+#ifdef CONFIG_SND_DEBUG
+extern void snd_gf1_print_voice_registers(struct snd_gus_card * gus);
+#endif
+
+/* gus.c */
+
+int snd_gus_use_inc(struct snd_gus_card * gus);
+void snd_gus_use_dec(struct snd_gus_card * gus);
+int snd_gus_create(struct snd_card *card,
+		   unsigned long port,
+		   int irq, int dma1, int dma2,
+		   int timer_dev,
+		   int voices,
+		   int pcm_channels,
+		   int effect,
+		   struct snd_gus_card ** rgus);
+int snd_gus_initialize(struct snd_gus_card * gus);
+
+/* gus_irq.c */
+
+irqreturn_t snd_gus_interrupt(int irq, void *dev_id);
+#ifdef CONFIG_SND_DEBUG
+void snd_gus_irq_profile_init(struct snd_gus_card *gus);
+#endif
+
+/* gus_uart.c */
+
+int snd_gf1_rawmidi_new(struct snd_gus_card * gus, int device, struct snd_rawmidi **rrawmidi);
+
+/* gus_dram.c */
+int snd_gus_dram_write(struct snd_gus_card *gus, char __user *ptr,
+		       unsigned int addr, unsigned int size);
+int snd_gus_dram_read(struct snd_gus_card *gus, char __user *ptr,
+		      unsigned int addr, unsigned int size, int rom);
+
+#endif /* __SOUND_GUS_H */
diff --git a/include/sound/hda_hwdep.h b/include/sound/hda_hwdep.h
new file mode 100644
index 00000000..1c0034e8
--- /dev/null
+++ b/include/sound/hda_hwdep.h
@@ -0,0 +1,44 @@
+/*
+ * HWDEP Interface for HD-audio codec
+ *
+ * Copyright (c) 2007 Takashi Iwai <tiwai@suse.de>
+ *
+ *  This driver is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This driver is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef __SOUND_HDA_HWDEP_H
+#define __SOUND_HDA_HWDEP_H
+
+#define HDA_HWDEP_VERSION	((1 << 16) | (0 << 8) | (0 << 0)) /* 1.0.0 */
+
+/* verb */
+#define HDA_REG_NID_SHIFT	24
+#define HDA_REG_VERB_SHIFT	8
+#define HDA_REG_VAL_SHIFT	0
+#define HDA_VERB(nid,verb,param)	((nid)<<24 | (verb)<<8 | (param))
+
+struct hda_verb_ioctl {
+	u32 verb;	/* HDA_VERB() */
+	u32 res;	/* response */
+};
+
+/*
+ * ioctls
+ */
+#define HDA_IOCTL_PVERSION		_IOR('H', 0x10, int)
+#define HDA_IOCTL_VERB_WRITE		_IOWR('H', 0x11, struct hda_verb_ioctl)
+#define HDA_IOCTL_GET_WCAP		_IOWR('H', 0x12, struct hda_verb_ioctl)
+
+#endif
diff --git a/include/sound/hdsp.h b/include/sound/hdsp.h
new file mode 100644
index 00000000..0909a384
--- /dev/null
+++ b/include/sound/hdsp.h
@@ -0,0 +1,110 @@
+#ifndef __SOUND_HDSP_H
+#define __SOUND_HDSP_H
+
+/*
+ *   Copyright (C) 2003 Thomas Charbonnel (thomas@undata.org)
+ *    
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/types.h>
+
+#define HDSP_MATRIX_MIXER_SIZE 2048
+
+enum HDSP_IO_Type {
+	Digiface,
+	Multiface,
+	H9652,
+	H9632,
+	RPM,
+	Undefined,
+};
+
+struct hdsp_peak_rms {
+	__u32 input_peaks[26];
+	__u32 playback_peaks[26];
+	__u32 output_peaks[28];
+	__u64 input_rms[26];
+	__u64 playback_rms[26];
+	/* These are only used for H96xx cards */
+	__u64 output_rms[26];
+};
+
+#define SNDRV_HDSP_IOCTL_GET_PEAK_RMS _IOR('H', 0x40, struct hdsp_peak_rms)
+
+struct hdsp_config_info {
+	unsigned char pref_sync_ref;
+	unsigned char wordclock_sync_check;
+	unsigned char spdif_sync_check;
+	unsigned char adatsync_sync_check;
+	unsigned char adat_sync_check[3];
+	unsigned char spdif_in;
+	unsigned char spdif_out;
+	unsigned char spdif_professional;
+	unsigned char spdif_emphasis;
+	unsigned char spdif_nonaudio;
+	unsigned int spdif_sample_rate;
+	unsigned int system_sample_rate;
+	unsigned int autosync_sample_rate;
+	unsigned char system_clock_mode;
+	unsigned char clock_source;
+	unsigned char autosync_ref;
+	unsigned char line_out;
+	unsigned char passthru; 
+	unsigned char da_gain;
+	unsigned char ad_gain;
+	unsigned char phone_gain;
+	unsigned char xlr_breakout_cable;
+	unsigned char analog_extension_board;
+};
+
+#define SNDRV_HDSP_IOCTL_GET_CONFIG_INFO _IOR('H', 0x41, struct hdsp_config_info)
+
+struct hdsp_firmware {
+	void __user *firmware_data;	/* 24413 x 4 bytes */
+};
+
+#define SNDRV_HDSP_IOCTL_UPLOAD_FIRMWARE _IOW('H', 0x42, struct hdsp_firmware)
+
+struct hdsp_version {
+	enum HDSP_IO_Type io_type;
+	unsigned short firmware_rev;
+};
+
+#define SNDRV_HDSP_IOCTL_GET_VERSION _IOR('H', 0x43, struct hdsp_version)
+
+struct hdsp_mixer {
+	unsigned short matrix[HDSP_MATRIX_MIXER_SIZE];
+};
+
+#define SNDRV_HDSP_IOCTL_GET_MIXER _IOR('H', 0x44, struct hdsp_mixer)
+
+struct hdsp_9632_aeb {
+	int aebi;
+	int aebo;
+};
+
+#define SNDRV_HDSP_IOCTL_GET_9632_AEB _IOR('H', 0x45, struct hdsp_9632_aeb)
+
+/* typedefs for compatibility to user-space */
+typedef enum HDSP_IO_Type HDSP_IO_Type;
+typedef struct hdsp_peak_rms hdsp_peak_rms_t;
+typedef struct hdsp_config_info hdsp_config_info_t;
+typedef struct hdsp_firmware hdsp_firmware_t;
+typedef struct hdsp_version hdsp_version_t;
+typedef struct hdsp_mixer hdsp_mixer_t;
+typedef struct hdsp_9632_aeb hdsp_9632_aeb_t;
+
+#endif /* __SOUND_HDSP_H */
diff --git a/include/sound/hdspm.h b/include/sound/hdspm.h
new file mode 100644
index 00000000..1f59ea2a
--- /dev/null
+++ b/include/sound/hdspm.h
@@ -0,0 +1,229 @@
+#ifndef __SOUND_HDSPM_H
+#define __SOUND_HDSPM_H
+/*
+ *   Copyright (C) 2003 Winfried Ritsch (IEM)
+ *   based on hdsp.h from Thomas Charbonnel (thomas@undata.org)
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Maximum channels is 64 even on 56Mode you have 64playbacks to matrix */
+#define HDSPM_MAX_CHANNELS      64
+
+enum hdspm_io_type {
+	MADI,
+	MADIface,
+	AIO,
+	AES32,
+	RayDAT
+};
+
+enum hdspm_speed {
+	ss,
+	ds,
+	qs
+};
+
+/* -------------------- IOCTL Peak/RMS Meters -------------------- */
+
+struct hdspm_peak_rms {
+	uint32_t input_peaks[64];
+	uint32_t playback_peaks[64];
+	uint32_t output_peaks[64];
+
+	uint64_t input_rms[64];
+	uint64_t playback_rms[64];
+	uint64_t output_rms[64];
+
+	uint8_t speed; /* enum {ss, ds, qs} */
+	int status2;
+};
+
+#define SNDRV_HDSPM_IOCTL_GET_PEAK_RMS \
+	_IOR('H', 0x42, struct hdspm_peak_rms)
+
+/* ------------ CONFIG block IOCTL ---------------------- */
+
+struct hdspm_config {
+	unsigned char pref_sync_ref;
+	unsigned char wordclock_sync_check;
+	unsigned char madi_sync_check;
+	unsigned int system_sample_rate;
+	unsigned int autosync_sample_rate;
+	unsigned char system_clock_mode;
+	unsigned char clock_source;
+	unsigned char autosync_ref;
+	unsigned char line_out;
+	unsigned int passthru;
+	unsigned int analog_out;
+};
+
+#define SNDRV_HDSPM_IOCTL_GET_CONFIG \
+	_IOR('H', 0x41, struct hdspm_config)
+
+/**
+ * If there's a TCO (TimeCode Option) board installed,
+ * there are further options and status data available.
+ * The hdspm_ltc structure contains the current SMPTE
+ * timecode and some status information and can be
+ * obtained via SNDRV_HDSPM_IOCTL_GET_LTC or in the
+ * hdspm_status struct.
+ **/
+
+enum hdspm_ltc_format {
+	format_invalid,
+	fps_24,
+	fps_25,
+	fps_2997,
+	fps_30
+};
+
+enum hdspm_ltc_frame {
+	frame_invalid,
+	drop_frame,
+	full_frame
+};
+
+enum hdspm_ltc_input_format {
+	ntsc,
+	pal,
+	no_video
+};
+
+struct hdspm_ltc {
+	unsigned int ltc;
+
+	enum hdspm_ltc_format format;
+	enum hdspm_ltc_frame frame;
+	enum hdspm_ltc_input_format input_format;
+};
+
+#define SNDRV_HDSPM_IOCTL_GET_LTC _IOR('H', 0x46, struct hdspm_mixer_ioctl)
+
+/**
+ * The status data reflects the device's current state
+ * as determined by the card's configuration and
+ * connection status.
+ **/
+
+enum hdspm_sync {
+	hdspm_sync_no_lock = 0,
+	hdspm_sync_lock = 1,
+	hdspm_sync_sync = 2
+};
+
+enum hdspm_madi_input {
+	hdspm_input_optical = 0,
+	hdspm_input_coax = 1
+};
+
+enum hdspm_madi_channel_format {
+	hdspm_format_ch_64 = 0,
+	hdspm_format_ch_56 = 1
+};
+
+enum hdspm_madi_frame_format {
+	hdspm_frame_48 = 0,
+	hdspm_frame_96 = 1
+};
+
+enum hdspm_syncsource {
+	syncsource_wc = 0,
+	syncsource_madi = 1,
+	syncsource_tco = 2,
+	syncsource_sync = 3,
+	syncsource_none = 4
+};
+
+struct hdspm_status {
+	uint8_t card_type; /* enum hdspm_io_type */
+	enum hdspm_syncsource autosync_source;
+
+	uint64_t card_clock;
+	uint32_t master_period;
+
+	union {
+		struct {
+			uint8_t sync_wc; /* enum hdspm_sync */
+			uint8_t sync_madi; /* enum hdspm_sync */
+			uint8_t sync_tco; /* enum hdspm_sync */
+			uint8_t sync_in; /* enum hdspm_sync */
+			uint8_t madi_input; /* enum hdspm_madi_input */
+			uint8_t channel_format; /* enum hdspm_madi_channel_format */
+			uint8_t frame_format; /* enum hdspm_madi_frame_format */
+		} madi;
+	} card_specific;
+};
+
+#define SNDRV_HDSPM_IOCTL_GET_STATUS \
+	_IOR('H', 0x47, struct hdspm_status)
+
+/**
+ * Get information about the card and its add-ons.
+ **/
+
+#define HDSPM_ADDON_TCO 1
+
+struct hdspm_version {
+	uint8_t card_type; /* enum hdspm_io_type */
+	char cardname[20];
+	unsigned int serial;
+	unsigned short firmware_rev;
+	int addons;
+};
+
+#define SNDRV_HDSPM_IOCTL_GET_VERSION _IOR('H', 0x48, struct hdspm_version)
+
+/* ------------- get Matrix Mixer IOCTL --------------- */
+
+/* MADI mixer: 64inputs+64playback in 64outputs = 8192 => *4Byte =
+ * 32768 Bytes
+ */
+
+/* organisation is 64 channelfader in a continuous memory block */
+/* equivalent to hardware definition, maybe for future feature of mmap of
+ * them
+ */
+/* each of 64 outputs has 64 infader and 64 outfader:
+   Ins to Outs mixer[out].in[in], Outstreams to Outs mixer[out].pb[pb] */
+
+#define HDSPM_MIXER_CHANNELS HDSPM_MAX_CHANNELS
+
+struct hdspm_channelfader {
+	unsigned int in[HDSPM_MIXER_CHANNELS];
+	unsigned int pb[HDSPM_MIXER_CHANNELS];
+};
+
+struct hdspm_mixer {
+	struct hdspm_channelfader ch[HDSPM_MIXER_CHANNELS];
+};
+
+struct hdspm_mixer_ioctl {
+	struct hdspm_mixer *mixer;
+};
+
+/* use indirect access due to the limit of ioctl bit size */
+#define SNDRV_HDSPM_IOCTL_GET_MIXER _IOR('H', 0x44, struct hdspm_mixer_ioctl)
+
+/* typedefs for compatibility to user-space */
+typedef struct hdspm_peak_rms hdspm_peak_rms_t;
+typedef struct hdspm_config_info hdspm_config_info_t;
+typedef struct hdspm_version hdspm_version_t;
+typedef struct hdspm_channelfader snd_hdspm_channelfader_t;
+typedef struct hdspm_mixer hdspm_mixer_t;
+
+
+#endif
diff --git a/include/sound/hwdep.h b/include/sound/hwdep.h
new file mode 100644
index 00000000..8c05e47a
--- /dev/null
+++ b/include/sound/hwdep.h
@@ -0,0 +1,82 @@
+#ifndef __SOUND_HWDEP_H
+#define __SOUND_HWDEP_H
+
+/*
+ *  Hardware dependent layer 
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <sound/asound.h>
+#include <linux/poll.h>
+
+struct snd_hwdep;
+
+/* hwdep file ops; all ops can be NULL */
+struct snd_hwdep_ops {
+	long long (*llseek)(struct snd_hwdep *hw, struct file *file,
+			    long long offset, int orig);
+	long (*read)(struct snd_hwdep *hw, char __user *buf,
+		     long count, loff_t *offset);
+	long (*write)(struct snd_hwdep *hw, const char __user *buf,
+		      long count, loff_t *offset);
+	int (*open)(struct snd_hwdep *hw, struct file * file);
+	int (*release)(struct snd_hwdep *hw, struct file * file);
+	unsigned int (*poll)(struct snd_hwdep *hw, struct file *file,
+			     poll_table *wait);
+	int (*ioctl)(struct snd_hwdep *hw, struct file *file,
+		     unsigned int cmd, unsigned long arg);
+	int (*ioctl_compat)(struct snd_hwdep *hw, struct file *file,
+			    unsigned int cmd, unsigned long arg);
+	int (*mmap)(struct snd_hwdep *hw, struct file *file,
+		    struct vm_area_struct *vma);
+	int (*dsp_status)(struct snd_hwdep *hw,
+			  struct snd_hwdep_dsp_status *status);
+	int (*dsp_load)(struct snd_hwdep *hw,
+			struct snd_hwdep_dsp_image *image);
+};
+
+struct snd_hwdep {
+	struct snd_card *card;
+	struct list_head list;
+	int device;
+	char id[32];
+	char name[80];
+	int iface;
+
+#ifdef CONFIG_SND_OSSEMUL
+	char oss_dev[32];
+	int oss_type;
+	int ossreg;
+#endif
+
+	struct snd_hwdep_ops ops;
+	wait_queue_head_t open_wait;
+	void *private_data;
+	void (*private_free) (struct snd_hwdep *hwdep);
+
+	struct mutex open_mutex;
+	int used;			/* reference counter */
+	unsigned int dsp_loaded;	/* bit fields of loaded dsp indices */
+	unsigned int exclusive:1;	/* exclusive access mode */
+};
+
+extern int snd_hwdep_new(struct snd_card *card, char *id, int device,
+			 struct snd_hwdep **rhwdep);
+
+#endif /* __SOUND_HWDEP_H */
diff --git a/include/sound/i2c.h b/include/sound/i2c.h
new file mode 100644
index 00000000..d125ff8c
--- /dev/null
+++ b/include/sound/i2c.h
@@ -0,0 +1,104 @@
+#ifndef __SOUND_I2C_H
+#define __SOUND_I2C_H
+
+/*
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ *
+ */
+
+#define SND_I2C_DEVICE_ADDRTEN	(1<<0)	/* 10-bit I2C address */
+
+struct snd_i2c_device {
+	struct list_head list;
+	struct snd_i2c_bus *bus;	/* I2C bus */
+	char name[32];		/* some useful device name */
+	unsigned short flags;	/* device flags */
+	unsigned short addr;	/* device address (might be 10-bit) */
+	unsigned long private_value;
+	void *private_data;
+	void (*private_free)(struct snd_i2c_device *device);
+};
+
+#define snd_i2c_device(n) list_entry(n, struct snd_i2c_device, list)
+
+struct snd_i2c_bit_ops {
+	void (*start)(struct snd_i2c_bus *bus);	/* transfer start */
+	void (*stop)(struct snd_i2c_bus *bus);	/* transfer stop */
+	void (*direction)(struct snd_i2c_bus *bus, int clock, int data);  /* set line direction (0 = write, 1 = read) */
+	void (*setlines)(struct snd_i2c_bus *bus, int clock, int data);
+	int (*getclock)(struct snd_i2c_bus *bus);
+	int (*getdata)(struct snd_i2c_bus *bus, int ack);
+};
+
+struct snd_i2c_ops {
+	int (*sendbytes)(struct snd_i2c_device *device, unsigned char *bytes, int count);
+	int (*readbytes)(struct snd_i2c_device *device, unsigned char *bytes, int count);
+	int (*probeaddr)(struct snd_i2c_bus *bus, unsigned short addr);
+};
+
+struct snd_i2c_bus {
+	struct snd_card *card;	/* card which I2C belongs to */
+	char name[32];		/* some useful label */
+
+	struct mutex lock_mutex;
+
+	struct snd_i2c_bus *master;	/* master bus when SCK/SCL is shared */
+	struct list_head buses;	/* master: slave buses sharing SCK/SCL, slave: link list */
+
+	struct list_head devices; /* attached devices to this bus */
+
+	union {
+		struct snd_i2c_bit_ops *bit;
+		void *ops;
+	} hw_ops;		/* lowlevel operations */
+	struct snd_i2c_ops *ops;	/* midlevel operations */
+
+	unsigned long private_value;
+	void *private_data;
+	void (*private_free)(struct snd_i2c_bus *bus);
+};
+
+#define snd_i2c_slave_bus(n) list_entry(n, struct snd_i2c_bus, buses)
+
+int snd_i2c_bus_create(struct snd_card *card, const char *name,
+		       struct snd_i2c_bus *master, struct snd_i2c_bus **ri2c);
+int snd_i2c_device_create(struct snd_i2c_bus *bus, const char *name,
+			  unsigned char addr, struct snd_i2c_device **rdevice);
+int snd_i2c_device_free(struct snd_i2c_device *device);
+
+static inline void snd_i2c_lock(struct snd_i2c_bus *bus)
+{
+	if (bus->master)
+		mutex_lock(&bus->master->lock_mutex);
+	else
+		mutex_lock(&bus->lock_mutex);
+}
+
+static inline void snd_i2c_unlock(struct snd_i2c_bus *bus)
+{
+	if (bus->master)
+		mutex_unlock(&bus->master->lock_mutex);
+	else
+		mutex_unlock(&bus->lock_mutex);
+}
+
+int snd_i2c_sendbytes(struct snd_i2c_device *device, unsigned char *bytes, int count);
+int snd_i2c_readbytes(struct snd_i2c_device *device, unsigned char *bytes, int count);
+int snd_i2c_probeaddr(struct snd_i2c_bus *bus, unsigned short addr);
+
+#endif /* __SOUND_I2C_H */
diff --git a/include/sound/info.h b/include/sound/info.h
new file mode 100644
index 00000000..9ca1a493
--- /dev/null
+++ b/include/sound/info.h
@@ -0,0 +1,202 @@
+#ifndef __SOUND_INFO_H
+#define __SOUND_INFO_H
+
+/*
+ *  Header file for info interface
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <linux/poll.h>
+
+/* buffer for information */
+struct snd_info_buffer {
+	char *buffer;		/* pointer to begin of buffer */
+	unsigned int curr;	/* current position in buffer */
+	unsigned int size;	/* current size */
+	unsigned int len;	/* total length of buffer */
+	int stop;		/* stop flag */
+	int error;		/* error code */
+};
+
+#define SNDRV_INFO_CONTENT_TEXT		0
+#define SNDRV_INFO_CONTENT_DATA		1
+
+struct snd_info_entry;
+
+struct snd_info_entry_text {
+	void (*read)(struct snd_info_entry *entry,
+		     struct snd_info_buffer *buffer);
+	void (*write)(struct snd_info_entry *entry,
+		      struct snd_info_buffer *buffer);
+};
+
+struct snd_info_entry_ops {
+	int (*open)(struct snd_info_entry *entry,
+		    unsigned short mode, void **file_private_data);
+	int (*release)(struct snd_info_entry *entry,
+		       unsigned short mode, void *file_private_data);
+	ssize_t (*read)(struct snd_info_entry *entry, void *file_private_data,
+			struct file *file, char __user *buf,
+			size_t count, loff_t pos);
+	ssize_t (*write)(struct snd_info_entry *entry, void *file_private_data,
+			 struct file *file, const char __user *buf,
+			 size_t count, loff_t pos);
+	loff_t (*llseek)(struct snd_info_entry *entry,
+			 void *file_private_data, struct file *file,
+			 loff_t offset, int orig);
+	unsigned int (*poll)(struct snd_info_entry *entry,
+			     void *file_private_data, struct file *file,
+			     poll_table *wait);
+	int (*ioctl)(struct snd_info_entry *entry, void *file_private_data,
+		     struct file *file, unsigned int cmd, unsigned long arg);
+	int (*mmap)(struct snd_info_entry *entry, void *file_private_data,
+		    struct inode *inode, struct file *file,
+		    struct vm_area_struct *vma);
+};
+
+struct snd_info_entry {
+	const char *name;
+	umode_t mode;
+	long size;
+	unsigned short content;
+	union {
+		struct snd_info_entry_text text;
+		struct snd_info_entry_ops *ops;
+	} c;
+	struct snd_info_entry *parent;
+	struct snd_card *card;
+	struct module *module;
+	void *private_data;
+	void (*private_free)(struct snd_info_entry *entry);
+	struct proc_dir_entry *p;
+	struct mutex access;
+	struct list_head children;
+	struct list_head list;
+};
+
+#if defined(CONFIG_SND_OSSEMUL) && defined(CONFIG_PROC_FS)
+int snd_info_minor_register(void);
+int snd_info_minor_unregister(void);
+#else
+#define snd_info_minor_register() /* NOP */
+#define snd_info_minor_unregister() /* NOP */
+#endif
+
+
+#ifdef CONFIG_PROC_FS
+
+extern struct snd_info_entry *snd_seq_root;
+#ifdef CONFIG_SND_OSSEMUL
+extern struct snd_info_entry *snd_oss_root;
+void snd_card_info_read_oss(struct snd_info_buffer *buffer);
+#else
+#define snd_oss_root NULL
+static inline void snd_card_info_read_oss(struct snd_info_buffer *buffer) {}
+#endif
+
+__printf(2, 3)
+int snd_iprintf(struct snd_info_buffer *buffer, const char *fmt, ...);
+int snd_info_init(void);
+int snd_info_done(void);
+
+int snd_info_get_line(struct snd_info_buffer *buffer, char *line, int len);
+const char *snd_info_get_str(char *dest, const char *src, int len);
+struct snd_info_entry *snd_info_create_module_entry(struct module *module,
+					       const char *name,
+					       struct snd_info_entry *parent);
+struct snd_info_entry *snd_info_create_card_entry(struct snd_card *card,
+					     const char *name,
+					     struct snd_info_entry *parent);
+void snd_info_free_entry(struct snd_info_entry *entry);
+int snd_info_store_text(struct snd_info_entry *entry);
+int snd_info_restore_text(struct snd_info_entry *entry);
+
+int snd_info_card_create(struct snd_card *card);
+int snd_info_card_register(struct snd_card *card);
+int snd_info_card_free(struct snd_card *card);
+void snd_info_card_disconnect(struct snd_card *card);
+void snd_info_card_id_change(struct snd_card *card);
+int snd_info_register(struct snd_info_entry *entry);
+
+/* for card drivers */
+int snd_card_proc_new(struct snd_card *card, const char *name,
+		      struct snd_info_entry **entryp);
+
+static inline void snd_info_set_text_ops(struct snd_info_entry *entry, 
+	void *private_data,
+	void (*read)(struct snd_info_entry *, struct snd_info_buffer *))
+{
+	entry->private_data = private_data;
+	entry->c.text.read = read;
+}
+
+int snd_info_check_reserved_words(const char *str);
+
+#else
+
+#define snd_seq_root NULL
+#define snd_oss_root NULL
+
+static inline int snd_iprintf(struct snd_info_buffer *buffer, char *fmt, ...) { return 0; }
+static inline int snd_info_init(void) { return 0; }
+static inline int snd_info_done(void) { return 0; }
+
+static inline int snd_info_get_line(struct snd_info_buffer *buffer, char *line, int len) { return 0; }
+static inline char *snd_info_get_str(char *dest, char *src, int len) { return NULL; }
+static inline struct snd_info_entry *snd_info_create_module_entry(struct module *module, const char *name, struct snd_info_entry *parent) { return NULL; }
+static inline struct snd_info_entry *snd_info_create_card_entry(struct snd_card *card, const char *name, struct snd_info_entry *parent) { return NULL; }
+static inline void snd_info_free_entry(struct snd_info_entry *entry) { ; }
+
+static inline int snd_info_card_create(struct snd_card *card) { return 0; }
+static inline int snd_info_card_register(struct snd_card *card) { return 0; }
+static inline int snd_info_card_free(struct snd_card *card) { return 0; }
+static inline void snd_info_card_disconnect(struct snd_card *card) { }
+static inline void snd_info_card_id_change(struct snd_card *card) { }
+static inline int snd_info_register(struct snd_info_entry *entry) { return 0; }
+
+static inline int snd_card_proc_new(struct snd_card *card, const char *name,
+				    struct snd_info_entry **entryp) { return -EINVAL; }
+static inline void snd_info_set_text_ops(struct snd_info_entry *entry __attribute__((unused)),
+					 void *private_data,
+					 void (*read)(struct snd_info_entry *, struct snd_info_buffer *)) {}
+
+static inline int snd_info_check_reserved_words(const char *str) { return 1; }
+
+#endif
+
+/*
+ * OSS info part
+ */
+
+#if defined(CONFIG_SND_OSSEMUL) && defined(CONFIG_PROC_FS)
+
+#define SNDRV_OSS_INFO_DEV_AUDIO	0
+#define SNDRV_OSS_INFO_DEV_SYNTH	1
+#define SNDRV_OSS_INFO_DEV_MIDI		2
+#define SNDRV_OSS_INFO_DEV_TIMERS	4
+#define SNDRV_OSS_INFO_DEV_MIXERS	5
+
+#define SNDRV_OSS_INFO_DEV_COUNT	6
+
+int snd_oss_info_register(int dev, int num, char *string);
+#define snd_oss_info_unregister(dev, num) snd_oss_info_register(dev, num, NULL)
+
+#endif /* CONFIG_SND_OSSEMUL && CONFIG_PROC_FS */
+
+#endif /* __SOUND_INFO_H */
diff --git a/include/sound/initval.h b/include/sound/initval.h
new file mode 100644
index 00000000..f99a0d2d
--- /dev/null
+++ b/include/sound/initval.h
@@ -0,0 +1,90 @@
+#ifndef __SOUND_INITVAL_H
+#define __SOUND_INITVAL_H
+
+/*
+ *  Init values for soundcard modules
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#define SNDRV_AUTO_PORT		1
+#define SNDRV_AUTO_IRQ		0xffff
+#define SNDRV_AUTO_DMA		0xffff
+#define SNDRV_AUTO_DMA_SIZE	(0x7fffffff)
+
+#define SNDRV_DEFAULT_IDX1	(-1)
+#define SNDRV_DEFAULT_STR1	NULL
+#define SNDRV_DEFAULT_ENABLE1	1
+#define SNDRV_DEFAULT_PORT1	SNDRV_AUTO_PORT
+#define SNDRV_DEFAULT_IRQ1	SNDRV_AUTO_IRQ
+#define SNDRV_DEFAULT_DMA1	SNDRV_AUTO_DMA
+#define SNDRV_DEFAULT_DMA_SIZE1	SNDRV_AUTO_DMA_SIZE
+#define SNDRV_DEFAULT_PTR1	SNDRV_DEFAULT_STR1
+
+#define SNDRV_DEFAULT_IDX	{ [0 ... (SNDRV_CARDS-1)] = -1 }
+#define SNDRV_DEFAULT_STR	{ [0 ... (SNDRV_CARDS-1)] = NULL }
+#define SNDRV_DEFAULT_ENABLE	{ 1, [1 ... (SNDRV_CARDS-1)] = 0 }
+#define SNDRV_DEFAULT_ENABLE_PNP { [0 ... (SNDRV_CARDS-1)] = 1 }
+#ifdef CONFIG_PNP
+#define SNDRV_DEFAULT_ENABLE_ISAPNP SNDRV_DEFAULT_ENABLE_PNP
+#else
+#define SNDRV_DEFAULT_ENABLE_ISAPNP SNDRV_DEFAULT_ENABLE
+#endif
+#define SNDRV_DEFAULT_PORT	{ [0 ... (SNDRV_CARDS-1)] = SNDRV_AUTO_PORT }
+#define SNDRV_DEFAULT_IRQ	{ [0 ... (SNDRV_CARDS-1)] = SNDRV_AUTO_IRQ }
+#define SNDRV_DEFAULT_DMA	{ [0 ... (SNDRV_CARDS-1)] = SNDRV_AUTO_DMA }
+#define SNDRV_DEFAULT_DMA_SIZE	{ [0 ... (SNDRV_CARDS-1)] = SNDRV_AUTO_DMA_SIZE }
+#define SNDRV_DEFAULT_PTR	SNDRV_DEFAULT_STR
+
+#ifdef SNDRV_LEGACY_FIND_FREE_IRQ
+#include <linux/interrupt.h>
+
+static irqreturn_t snd_legacy_empty_irq_handler(int irq, void *dev_id)
+{
+	return IRQ_HANDLED;
+}
+
+static int snd_legacy_find_free_irq(int *irq_table)
+{
+	while (*irq_table != -1) {
+		if (!request_irq(*irq_table, snd_legacy_empty_irq_handler,
+				 IRQF_PROBE_SHARED, "ALSA Test IRQ",
+				 (void *) irq_table)) {
+			free_irq(*irq_table, (void *) irq_table);
+			return *irq_table;
+		}
+		irq_table++;
+	}
+	return -1;
+}
+#endif
+
+#ifdef SNDRV_LEGACY_FIND_FREE_DMA
+static int snd_legacy_find_free_dma(int *dma_table)
+{
+	while (*dma_table != -1) {
+		if (!request_dma(*dma_table, "ALSA Test DMA")) {
+			free_dma(*dma_table);
+			return *dma_table;
+		}
+		dma_table++;
+	}
+	return -1;
+}
+#endif
+
+#endif /* __SOUND_INITVAL_H */
diff --git a/include/sound/jack.h b/include/sound/jack.h
new file mode 100644
index 00000000..58916573
--- /dev/null
+++ b/include/sound/jack.h
@@ -0,0 +1,99 @@
+#ifndef __SOUND_JACK_H
+#define __SOUND_JACK_H
+
+/*
+ *  Jack abstraction layer
+ *
+ *  Copyright 2008 Wolfson Microelectronics plc
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <sound/core.h>
+
+struct input_dev;
+
+/**
+ * Jack types which can be reported.  These values are used as a
+ * bitmask.
+ *
+ * Note that this must be kept in sync with the lookup table in
+ * sound/core/jack.c.
+ */
+enum snd_jack_types {
+	SND_JACK_HEADPHONE	= 0x0001,
+	SND_JACK_MICROPHONE	= 0x0002,
+	SND_JACK_HEADSET	= SND_JACK_HEADPHONE | SND_JACK_MICROPHONE,
+	SND_JACK_LINEOUT	= 0x0004,
+	SND_JACK_MECHANICAL	= 0x0008, /* If detected separately */
+	SND_JACK_VIDEOOUT	= 0x0010,
+	SND_JACK_AVOUT		= SND_JACK_LINEOUT | SND_JACK_VIDEOOUT,
+	SND_JACK_LINEIN		= 0x0020,
+
+	/* Kept separate from switches to facilitate implementation */
+	SND_JACK_BTN_0		= 0x4000,
+	SND_JACK_BTN_1		= 0x2000,
+	SND_JACK_BTN_2		= 0x1000,
+	SND_JACK_BTN_3		= 0x0800,
+	SND_JACK_BTN_4		= 0x0400,
+	SND_JACK_BTN_5		= 0x0200,
+};
+
+/* Keep in sync with definitions above */
+#define SND_JACK_SWITCH_TYPES 6
+
+struct snd_jack {
+	struct input_dev *input_dev;
+	int registered;
+	int type;
+	const char *id;
+	char name[100];
+	unsigned int key[6];   /* Keep in sync with definitions above */
+	void *private_data;
+	void (*private_free)(struct snd_jack *);
+};
+
+#ifdef CONFIG_SND_JACK
+
+int snd_jack_new(struct snd_card *card, const char *id, int type,
+		 struct snd_jack **jack);
+void snd_jack_set_parent(struct snd_jack *jack, struct device *parent);
+int snd_jack_set_key(struct snd_jack *jack, enum snd_jack_types type,
+		     int keytype);
+
+void snd_jack_report(struct snd_jack *jack, int status);
+
+#else
+
+static inline int snd_jack_new(struct snd_card *card, const char *id, int type,
+			       struct snd_jack **jack)
+{
+	return 0;
+}
+
+static inline void snd_jack_set_parent(struct snd_jack *jack,
+				       struct device *parent)
+{
+}
+
+static inline void snd_jack_report(struct snd_jack *jack, int status)
+{
+}
+
+#endif
+
+#endif
diff --git a/include/sound/l3.h b/include/sound/l3.h
new file mode 100644
index 00000000..423a08f0
--- /dev/null
+++ b/include/sound/l3.h
@@ -0,0 +1,18 @@
+#ifndef _L3_H_
+#define _L3_H_ 1
+
+struct l3_pins {
+	void (*setdat)(int);
+	void (*setclk)(int);
+	void (*setmode)(int);
+	int data_hold;
+	int data_setup;
+	int clock_high;
+	int mode_hold;
+	int mode;
+	int mode_setup;
+};
+
+int l3_write(struct l3_pins *adap, u8 addr, u8 *data, int len);
+
+#endif
diff --git a/include/sound/max9768.h b/include/sound/max9768.h
new file mode 100644
index 00000000..0f78b41d
--- /dev/null
+++ b/include/sound/max9768.h
@@ -0,0 +1,24 @@
+/*
+ * Platform data for MAX9768
+ * Copyright (C) 2011, 2012 by Wolfram Sang, Pengutronix e.K.
+ * same licence as the driver
+ */
+
+#ifndef __SOUND_MAX9768_PDATA_H__
+#define __SOUND_MAX9768_PDATA_H__
+
+/**
+ * struct max9768_pdata - optional platform specific MAX9768 configuration
+ * @shdn_gpio:	GPIO to SHDN pin. If not valid, pin must be hardwired HIGH
+ * @mute_gpio:	GPIO to MUTE pin. If not valid, control for mute won't be added
+ * @flags: configuration flags, e.g. set classic PWM mode (check datasheet
+ *         regarding "filterless modulation" which is default).
+ */
+struct max9768_pdata {
+	int shdn_gpio;
+	int mute_gpio;
+	unsigned flags;
+#define MAX9768_FLAG_CLASSIC_PWM	(1 << 0)
+};
+
+#endif /* __SOUND_MAX9768_PDATA_H__*/
diff --git a/include/sound/max98088.h b/include/sound/max98088.h
new file mode 100644
index 00000000..c3ba8239
--- /dev/null
+++ b/include/sound/max98088.h
@@ -0,0 +1,50 @@
+/*
+ * Platform data for MAX98088
+ *
+ * Copyright 2010 Maxim Integrated Products
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __SOUND_MAX98088_PDATA_H__
+#define __SOUND_MAX98088_PDATA_H__
+
+/* Equalizer filter response configuration */
+struct max98088_eq_cfg {
+       const char *name;
+       unsigned int rate;
+       u16 band1[5];
+       u16 band2[5];
+       u16 band3[5];
+       u16 band4[5];
+       u16 band5[5];
+};
+
+/* codec platform data */
+struct max98088_pdata {
+
+       /* Equalizers for DAI1 and DAI2 */
+       struct max98088_eq_cfg *eq_cfg;
+       unsigned int eq_cfgcnt;
+
+       /* Receiver output can be configured as power amplifier or LINE out */
+       /* Set receiver_mode to:
+        * 0 = amplifier output, or
+        * 1 = LINE level output
+        */
+       unsigned int receiver_mode:1;
+
+       /* Analog/digital microphone configuration:
+        * 0 = analog microphone input (normal setting)
+        * 1 = digital microphone input
+        */
+       unsigned int digmic_left_mode:1;
+       unsigned int digmic_right_mode:1;
+
+};
+
+#endif
diff --git a/include/sound/max98095.h b/include/sound/max98095.h
new file mode 100644
index 00000000..7513a42d
--- /dev/null
+++ b/include/sound/max98095.h
@@ -0,0 +1,54 @@
+/*
+ * Platform data for MAX98095
+ *
+ * Copyright 2011 Maxim Integrated Products
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __SOUND_MAX98095_PDATA_H__
+#define __SOUND_MAX98095_PDATA_H__
+
+/* Equalizer filter response configuration */
+struct max98095_eq_cfg {
+	const char *name;
+	unsigned int rate;
+	u16 band1[5];
+	u16 band2[5];
+	u16 band3[5];
+	u16 band4[5];
+	u16 band5[5];
+};
+
+/* Biquad filter response configuration */
+struct max98095_biquad_cfg {
+	const char *name;
+	unsigned int rate;
+	u16 band1[5];
+	u16 band2[5];
+};
+
+/* codec platform data */
+struct max98095_pdata {
+
+	/* Equalizers for DAI1 and DAI2 */
+	struct max98095_eq_cfg *eq_cfg;
+	unsigned int eq_cfgcnt;
+
+	/* Biquad filter for DAI1 and DAI2 */
+	struct max98095_biquad_cfg *bq_cfg;
+	unsigned int bq_cfgcnt;
+
+	/* Analog/digital microphone configuration:
+	 * 0 = analog microphone input (normal setting)
+	 * 1 = digital microphone input
+	 */
+	unsigned int digmic_left_mode:1;
+	unsigned int digmic_right_mode:1;
+};
+
+#endif
diff --git a/include/sound/memalloc.h b/include/sound/memalloc.h
new file mode 100644
index 00000000..c4250621
--- /dev/null
+++ b/include/sound/memalloc.h
@@ -0,0 +1,136 @@
+/*
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ *                   Takashi Iwai <tiwai@suse.de>
+ * 
+ *  Generic memory allocators
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#ifndef __SOUND_MEMALLOC_H
+#define __SOUND_MEMALLOC_H
+
+struct device;
+
+/*
+ * buffer device info
+ */
+struct snd_dma_device {
+	int type;			/* SNDRV_DMA_TYPE_XXX */
+	struct device *dev;		/* generic device */
+};
+
+#ifndef snd_dma_pci_data
+#define snd_dma_pci_data(pci)	(&(pci)->dev)
+#define snd_dma_isa_data()	NULL
+#define snd_dma_continuous_data(x)	((struct device *)(unsigned long)(x))
+#endif
+
+
+/*
+ * buffer types
+ */
+#define SNDRV_DMA_TYPE_UNKNOWN		0	/* not defined */
+#define SNDRV_DMA_TYPE_CONTINUOUS	1	/* continuous no-DMA memory */
+#define SNDRV_DMA_TYPE_DEV		2	/* generic device continuous */
+#ifdef CONFIG_SND_DMA_SGBUF
+#define SNDRV_DMA_TYPE_DEV_SG		3	/* generic device SG-buffer */
+#else
+#define SNDRV_DMA_TYPE_DEV_SG	SNDRV_DMA_TYPE_DEV /* no SG-buf support */
+#endif
+
+/*
+ * info for buffer allocation
+ */
+struct snd_dma_buffer {
+	struct snd_dma_device dev;	/* device type */
+	unsigned char *area;	/* virtual pointer */
+	dma_addr_t addr;	/* physical address */
+	size_t bytes;		/* buffer size in bytes */
+	void *private_data;	/* private for allocator; don't touch */
+};
+
+#ifdef CONFIG_SND_DMA_SGBUF
+/*
+ * Scatter-Gather generic device pages
+ */
+void *snd_malloc_sgbuf_pages(struct device *device,
+			     size_t size, struct snd_dma_buffer *dmab,
+			     size_t *res_size);
+int snd_free_sgbuf_pages(struct snd_dma_buffer *dmab);
+
+struct snd_sg_page {
+	void *buf;
+	dma_addr_t addr;
+};
+
+struct snd_sg_buf {
+	int size;	/* allocated byte size */
+	int pages;	/* allocated pages */
+	int tblsize;	/* allocated table size */
+	struct snd_sg_page *table;	/* address table */
+	struct page **page_table;	/* page table (for vmap/vunmap) */
+	struct device *dev;
+};
+
+/*
+ * return the pages matching with the given byte size
+ */
+static inline unsigned int snd_sgbuf_aligned_pages(size_t size)
+{
+	return (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
+}
+
+/*
+ * return the physical address at the corresponding offset
+ */
+static inline dma_addr_t snd_sgbuf_get_addr(struct snd_sg_buf *sgbuf, size_t offset)
+{
+	dma_addr_t addr = sgbuf->table[offset >> PAGE_SHIFT].addr;
+	addr &= PAGE_MASK;
+	return addr + offset % PAGE_SIZE;
+}
+
+/*
+ * return the virtual address at the corresponding offset
+ */
+static inline void *snd_sgbuf_get_ptr(struct snd_sg_buf *sgbuf, size_t offset)
+{
+	return sgbuf->table[offset >> PAGE_SHIFT].buf + offset % PAGE_SIZE;
+}
+#endif /* CONFIG_SND_DMA_SGBUF */
+
+/* allocate/release a buffer */
+int snd_dma_alloc_pages(int type, struct device *dev, size_t size,
+			struct snd_dma_buffer *dmab);
+int snd_dma_alloc_pages_fallback(int type, struct device *dev, size_t size,
+                                 struct snd_dma_buffer *dmab);
+void snd_dma_free_pages(struct snd_dma_buffer *dmab);
+
+/* buffer-preservation managements */
+
+#define snd_dma_pci_buf_id(pci)	(((unsigned int)(pci)->vendor << 16) | (pci)->device)
+
+size_t snd_dma_get_reserved_buf(struct snd_dma_buffer *dmab, unsigned int id);
+int snd_dma_reserve_buf(struct snd_dma_buffer *dmab, unsigned int id);
+
+/* basic memory allocation functions */
+void *snd_malloc_pages(size_t size, gfp_t gfp_flags);
+void snd_free_pages(void *ptr, size_t size);
+
+#endif /* __SOUND_MEMALLOC_H */
+
diff --git a/include/sound/minors.h b/include/sound/minors.h
new file mode 100644
index 00000000..5978f9a8
--- /dev/null
+++ b/include/sound/minors.h
@@ -0,0 +1,112 @@
+#ifndef __SOUND_MINORS_H
+#define __SOUND_MINORS_H
+
+/*
+ *  MINOR numbers
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#define SNDRV_OS_MINORS			256
+
+#define SNDRV_MINOR_DEVICES		32
+#define SNDRV_MINOR_CARD(minor)		((minor) >> 5)
+#define SNDRV_MINOR_DEVICE(minor)	((minor) & 0x001f)
+#define SNDRV_MINOR(card, dev)		(((card) << 5) | (dev))
+
+/* these minors can still be used for autoloading devices (/dev/aload*) */
+#define SNDRV_MINOR_CONTROL		0	/* 0 */
+#define SNDRV_MINOR_GLOBAL		1	/* 1 */
+#define SNDRV_MINOR_SEQUENCER		1	/* SNDRV_MINOR_GLOBAL + 0 * 32 */
+#define SNDRV_MINOR_TIMER		33	/* SNDRV_MINOR_GLOBAL + 1 * 32 */
+
+#ifndef CONFIG_SND_DYNAMIC_MINORS
+#define SNDRV_MINOR_COMPRESS		2	/* 2 - 3 */
+#define SNDRV_MINOR_HWDEP		4	/* 4 - 7 */
+#define SNDRV_MINOR_RAWMIDI		8	/* 8 - 15 */
+#define SNDRV_MINOR_PCM_PLAYBACK	16	/* 16 - 23 */
+#define SNDRV_MINOR_PCM_CAPTURE		24	/* 24 - 31 */
+
+/* same as first respective minor number to make minor allocation easier */
+#define SNDRV_DEVICE_TYPE_CONTROL	SNDRV_MINOR_CONTROL
+#define SNDRV_DEVICE_TYPE_HWDEP		SNDRV_MINOR_HWDEP
+#define SNDRV_DEVICE_TYPE_RAWMIDI	SNDRV_MINOR_RAWMIDI
+#define SNDRV_DEVICE_TYPE_PCM_PLAYBACK	SNDRV_MINOR_PCM_PLAYBACK
+#define SNDRV_DEVICE_TYPE_PCM_CAPTURE	SNDRV_MINOR_PCM_CAPTURE
+#define SNDRV_DEVICE_TYPE_SEQUENCER	SNDRV_MINOR_SEQUENCER
+#define SNDRV_DEVICE_TYPE_TIMER		SNDRV_MINOR_TIMER
+#define SNDRV_DEVICE_TYPE_COMPRESS	SNDRV_MINOR_COMPRESS
+
+#else /* CONFIG_SND_DYNAMIC_MINORS */
+
+enum {
+	SNDRV_DEVICE_TYPE_CONTROL,
+	SNDRV_DEVICE_TYPE_SEQUENCER,
+	SNDRV_DEVICE_TYPE_TIMER,
+	SNDRV_DEVICE_TYPE_HWDEP,
+	SNDRV_DEVICE_TYPE_RAWMIDI,
+	SNDRV_DEVICE_TYPE_PCM_PLAYBACK,
+	SNDRV_DEVICE_TYPE_PCM_CAPTURE,
+	SNDRV_DEVICE_TYPE_COMPRESS,
+};
+
+#endif /* CONFIG_SND_DYNAMIC_MINORS */
+
+#define SNDRV_MINOR_HWDEPS		4
+#define SNDRV_MINOR_RAWMIDIS		8
+#define SNDRV_MINOR_PCMS		8
+
+
+#ifdef CONFIG_SND_OSSEMUL
+
+#define SNDRV_MINOR_OSS_DEVICES		16
+#define SNDRV_MINOR_OSS_CARD(minor)	((minor) >> 4)
+#define SNDRV_MINOR_OSS_DEVICE(minor)	((minor) & 0x000f)
+#define SNDRV_MINOR_OSS(card, dev)	(((card) << 4) | (dev))
+
+#define SNDRV_MINOR_OSS_MIXER		0	/* /dev/mixer - OSS 3.XX compatible */
+#define SNDRV_MINOR_OSS_SEQUENCER	1	/* /dev/sequencer - OSS 3.XX compatible */
+#define	SNDRV_MINOR_OSS_MIDI		2	/* /dev/midi - native midi interface - OSS 3.XX compatible - UART */
+#define SNDRV_MINOR_OSS_PCM		3	/* alias */
+#define SNDRV_MINOR_OSS_PCM_8		3	/* /dev/dsp - 8bit PCM - OSS 3.XX compatible */
+#define SNDRV_MINOR_OSS_AUDIO		4	/* /dev/audio - SunSparc compatible */
+#define SNDRV_MINOR_OSS_PCM_16		5	/* /dev/dsp16 - 16bit PCM - OSS 3.XX compatible */
+#define SNDRV_MINOR_OSS_SNDSTAT		6	/* /dev/sndstat - for compatibility with OSS */
+#define SNDRV_MINOR_OSS_RESERVED7	7	/* reserved for future use */
+#define SNDRV_MINOR_OSS_MUSIC		8	/* /dev/music - OSS 3.XX compatible */
+#define SNDRV_MINOR_OSS_DMMIDI		9	/* /dev/dmmidi0 - this device can have another minor # with OSS */
+#define SNDRV_MINOR_OSS_DMFM		10	/* /dev/dmfm0 - this device can have another minor # with OSS */
+#define SNDRV_MINOR_OSS_MIXER1		11	/* alternate mixer */
+#define SNDRV_MINOR_OSS_PCM1		12	/* alternate PCM (GF-A-1) */
+#define SNDRV_MINOR_OSS_MIDI1		13	/* alternate midi - SYNTH */
+#define SNDRV_MINOR_OSS_DMMIDI1		14	/* alternate dmmidi - SYNTH */
+#define SNDRV_MINOR_OSS_RESERVED15	15	/* reserved for future use */
+
+#define SNDRV_OSS_DEVICE_TYPE_MIXER	0
+#define SNDRV_OSS_DEVICE_TYPE_SEQUENCER	1
+#define SNDRV_OSS_DEVICE_TYPE_PCM	2
+#define SNDRV_OSS_DEVICE_TYPE_MIDI	3
+#define SNDRV_OSS_DEVICE_TYPE_DMFM	4
+#define SNDRV_OSS_DEVICE_TYPE_SNDSTAT	5
+#define SNDRV_OSS_DEVICE_TYPE_MUSIC	6
+
+#define MODULE_ALIAS_SNDRV_MINOR(type) \
+	MODULE_ALIAS("sound-service-?-" __stringify(type))
+
+#endif
+
+#endif /* __SOUND_MINORS_H */
diff --git a/include/sound/mixer_oss.h b/include/sound/mixer_oss.h
new file mode 100644
index 00000000..13cb0b43
--- /dev/null
+++ b/include/sound/mixer_oss.h
@@ -0,0 +1,81 @@
+#ifndef __SOUND_MIXER_OSS_H
+#define __SOUND_MIXER_OSS_H
+
+/*
+ *  OSS MIXER API
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#if defined(CONFIG_SND_MIXER_OSS) || defined(CONFIG_SND_MIXER_OSS_MODULE)
+
+#define SNDRV_OSS_MAX_MIXERS	32
+
+struct snd_mixer_oss_file;
+
+struct snd_mixer_oss_slot {
+	int number;
+	unsigned int stereo: 1;
+	int (*get_volume)(struct snd_mixer_oss_file *fmixer,
+			  struct snd_mixer_oss_slot *chn,
+			  int *left, int *right);
+	int (*put_volume)(struct snd_mixer_oss_file *fmixer,
+			  struct snd_mixer_oss_slot *chn,
+			  int left, int right);
+	int (*get_recsrc)(struct snd_mixer_oss_file *fmixer,
+			  struct snd_mixer_oss_slot *chn,
+			  int *active);
+	int (*put_recsrc)(struct snd_mixer_oss_file *fmixer,
+			  struct snd_mixer_oss_slot *chn,
+			  int active);
+	unsigned long private_value;
+	void *private_data;
+	void (*private_free)(struct snd_mixer_oss_slot *slot);
+	int volume[2];
+};
+
+struct snd_mixer_oss {
+	struct snd_card *card;
+	char id[16];
+	char name[32];
+	struct snd_mixer_oss_slot slots[SNDRV_OSS_MAX_MIXERS]; /* OSS mixer slots */
+	unsigned int mask_recsrc;		/* exclusive recsrc mask */
+	int (*get_recsrc)(struct snd_mixer_oss_file *fmixer,
+			  unsigned int *active_index);
+	int (*put_recsrc)(struct snd_mixer_oss_file *fmixer,
+			  unsigned int active_index);
+	void *private_data_recsrc;
+	void (*private_free_recsrc)(struct snd_mixer_oss *mixer);
+	struct mutex reg_mutex;
+	struct snd_info_entry *proc_entry;
+	int oss_dev_alloc;
+	/* --- */
+	int oss_recsrc;
+};
+
+struct snd_mixer_oss_file {
+	struct snd_card *card;
+	struct snd_mixer_oss *mixer;
+};
+
+int snd_mixer_oss_ioctl_card(struct snd_card *card,
+			     unsigned int cmd, unsigned long arg);
+
+#endif /* CONFIG_SND_MIXER_OSS */
+
+#endif /* __SOUND_MIXER_OSS_H */
diff --git a/include/sound/mpu401.h b/include/sound/mpu401.h
new file mode 100644
index 00000000..20230db0
--- /dev/null
+++ b/include/sound/mpu401.h
@@ -0,0 +1,138 @@
+#ifndef __SOUND_MPU401_H
+#define __SOUND_MPU401_H
+
+/*
+ *  Header file for MPU-401 and compatible cards
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include "rawmidi.h"
+#include <linux/interrupt.h>
+
+#define MPU401_HW_MPU401		1	/* native MPU401 */
+#define MPU401_HW_SB			2	/* SoundBlaster MPU-401 UART */
+#define MPU401_HW_ES1688		3	/* AudioDrive ES1688 MPU-401 UART */
+#define MPU401_HW_OPL3SA2		4	/* Yamaha OPL3-SA2 */
+#define MPU401_HW_SONICVIBES		5	/* S3 SonicVibes */
+#define MPU401_HW_CS4232		6	/* CS4232 */
+#define MPU401_HW_ES18XX		7	/* AudioDrive ES18XX MPU-401 UART */
+#define MPU401_HW_FM801			8	/* ForteMedia FM801 */
+#define MPU401_HW_TRID4DWAVE		9	/* Trident 4DWave */
+#define MPU401_HW_AZT2320		10	/* Aztech AZT2320 */
+#define MPU401_HW_ALS100		11	/* Avance Logic ALS100 */
+#define MPU401_HW_ICE1712		12	/* Envy24 */
+#define MPU401_HW_VIA686A		13	/* VIA 82C686A */
+#define MPU401_HW_YMFPCI		14	/* YMF DS-XG PCI */
+#define MPU401_HW_CMIPCI		15	/* CMIPCI MPU-401 UART */
+#define MPU401_HW_ALS4000		16	/* Avance Logic ALS4000 */
+#define MPU401_HW_INTEL8X0		17	/* Intel8x0 driver */
+#define MPU401_HW_PC98II		18	/* Roland PC98II */
+#define MPU401_HW_AUREAL		19	/* Aureal Vortex */
+
+#define MPU401_INFO_INPUT	(1 << 0)	/* input stream */
+#define MPU401_INFO_OUTPUT	(1 << 1)	/* output stream */
+#define MPU401_INFO_INTEGRATED	(1 << 2)	/* integrated h/w port */
+#define MPU401_INFO_MMIO	(1 << 3)	/* MMIO access */
+#define MPU401_INFO_TX_IRQ	(1 << 4)	/* independent TX irq */
+#define MPU401_INFO_IRQ_HOOK	(1 << 5)	/* mpu401 irq handler is called
+						   from driver irq handler */
+#define MPU401_INFO_NO_ACK	(1 << 6)	/* No ACK cmd needed */
+#define MPU401_INFO_USE_TIMER	(1 << 15)	/* internal */
+
+#define MPU401_MODE_BIT_INPUT		0
+#define MPU401_MODE_BIT_OUTPUT		1
+#define MPU401_MODE_BIT_INPUT_TRIGGER	2
+#define MPU401_MODE_BIT_OUTPUT_TRIGGER	3
+
+#define MPU401_MODE_INPUT		(1<<MPU401_MODE_BIT_INPUT)
+#define MPU401_MODE_OUTPUT		(1<<MPU401_MODE_BIT_OUTPUT)
+#define MPU401_MODE_INPUT_TRIGGER	(1<<MPU401_MODE_BIT_INPUT_TRIGGER)
+#define MPU401_MODE_OUTPUT_TRIGGER	(1<<MPU401_MODE_BIT_OUTPUT_TRIGGER)
+
+#define MPU401_MODE_INPUT_TIMER		(1<<0)
+#define MPU401_MODE_OUTPUT_TIMER	(1<<1)
+
+struct snd_mpu401 {
+	struct snd_rawmidi *rmidi;
+
+	unsigned short hardware;	/* MPU401_HW_XXXX */
+	unsigned int info_flags;	/* MPU401_INFO_XXX */
+	unsigned long port;		/* base port of MPU-401 chip */
+	unsigned long cport;		/* port + 1 (usually) */
+	struct resource *res;		/* port resource */
+	int irq;			/* IRQ number of MPU-401 chip */
+
+	unsigned long mode;		/* MPU401_MODE_XXXX */
+	int timer_invoked;
+
+	int (*open_input) (struct snd_mpu401 * mpu);
+	void (*close_input) (struct snd_mpu401 * mpu);
+	int (*open_output) (struct snd_mpu401 * mpu);
+	void (*close_output) (struct snd_mpu401 * mpu);
+	void *private_data;
+
+	struct snd_rawmidi_substream *substream_input;
+	struct snd_rawmidi_substream *substream_output;
+
+	spinlock_t input_lock;
+	spinlock_t output_lock;
+	spinlock_t timer_lock;
+	
+	struct timer_list timer;
+
+	void (*write) (struct snd_mpu401 * mpu, unsigned char data, unsigned long addr);
+	unsigned char (*read) (struct snd_mpu401 *mpu, unsigned long addr);
+};
+
+/* I/O ports */
+
+#define MPU401C(mpu) (mpu)->cport
+#define MPU401D(mpu) (mpu)->port
+
+/*
+ * control register bits
+ */
+/* read MPU401C() */
+#define MPU401_RX_EMPTY		0x80
+#define MPU401_TX_FULL		0x40
+
+/* write MPU401C() */
+#define MPU401_RESET		0xff
+#define MPU401_ENTER_UART	0x3f
+
+/* read MPU401D() */
+#define MPU401_ACK		0xfe
+
+
+/*
+
+ */
+
+irqreturn_t snd_mpu401_uart_interrupt(int irq, void *dev_id);
+irqreturn_t snd_mpu401_uart_interrupt_tx(int irq, void *dev_id);
+
+int snd_mpu401_uart_new(struct snd_card *card,
+			int device,
+			unsigned short hardware,
+			unsigned long port,
+			unsigned int info_flags,
+			int irq,
+			struct snd_rawmidi ** rrawmidi);
+
+#endif /* __SOUND_MPU401_H */
diff --git a/include/sound/opl3.h b/include/sound/opl3.h
new file mode 100644
index 00000000..6ba67070
--- /dev/null
+++ b/include/sound/opl3.h
@@ -0,0 +1,393 @@
+#ifndef __SOUND_OPL3_H
+#define __SOUND_OPL3_H
+
+/*
+ * Definitions of the OPL-3 registers.
+ *
+ * Copyright (c) by Jaroslav Kysela <perex@perex.cz>,
+ *                  Hannu Savolainen 1993-1996
+ *
+ *
+ *      The OPL-3 mode is switched on by writing 0x01, to the offset 5
+ *      of the right side.
+ *
+ *      Another special register at the right side is at offset 4. It contains
+ *      a bit mask defining which voices are used as 4 OP voices.
+ *
+ *      The percussive mode is implemented in the left side only.
+ *
+ *      With the above exceptions the both sides can be operated independently.
+ *      
+ *      A 4 OP voice can be created by setting the corresponding
+ *      bit at offset 4 of the right side.
+ *
+ *      For example setting the rightmost bit (0x01) changes the
+ *      first voice on the right side to the 4 OP mode. The fourth
+ *      voice is made inaccessible.
+ *
+ *      If a voice is set to the 2 OP mode, it works like 2 OP modes
+ *      of the original YM3812 (AdLib). In addition the voice can 
+ *      be connected the left, right or both stereo channels. It can
+ *      even be left unconnected. This works with 4 OP voices also.
+ *
+ *      The stereo connection bits are located in the FEEDBACK_CONNECTION
+ *      register of the voice (0xC0-0xC8). In 4 OP voices these bits are
+ *      in the second half of the voice.
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <sound/core.h>
+#include <sound/hwdep.h>
+#include <sound/timer.h>
+#include <sound/seq_midi_emul.h>
+#ifdef CONFIG_SND_SEQUENCER_OSS
+#include <sound/seq_oss.h>
+#include <sound/seq_oss_legacy.h>
+#endif
+#include <sound/seq_device.h>
+#include <sound/asound_fm.h>
+
+/*
+ *    Register numbers for the global registers
+ */
+
+#define OPL3_REG_TEST			0x01
+#define   OPL3_ENABLE_WAVE_SELECT	0x20
+
+#define OPL3_REG_TIMER1			0x02
+#define OPL3_REG_TIMER2			0x03
+#define OPL3_REG_TIMER_CONTROL		0x04	/* Left side */
+#define   OPL3_IRQ_RESET		0x80
+#define   OPL3_TIMER1_MASK		0x40
+#define   OPL3_TIMER2_MASK		0x20
+#define   OPL3_TIMER1_START		0x01
+#define   OPL3_TIMER2_START		0x02
+
+#define OPL3_REG_CONNECTION_SELECT	0x04	/* Right side */
+#define   OPL3_LEFT_4OP_0		0x01
+#define   OPL3_LEFT_4OP_1		0x02
+#define   OPL3_LEFT_4OP_2		0x04
+#define   OPL3_RIGHT_4OP_0		0x08
+#define   OPL3_RIGHT_4OP_1		0x10
+#define   OPL3_RIGHT_4OP_2		0x20
+
+#define OPL3_REG_MODE			0x05	/* Right side */
+#define   OPL3_OPL3_ENABLE		0x01	/* OPL3 mode */
+#define   OPL3_OPL4_ENABLE		0x02	/* OPL4 mode */
+
+#define OPL3_REG_KBD_SPLIT		0x08	/* Left side */
+#define   OPL3_COMPOSITE_SINE_WAVE_MODE	0x80	/* Don't use with OPL-3? */
+#define   OPL3_KEYBOARD_SPLIT		0x40
+
+#define OPL3_REG_PERCUSSION		0xbd	/* Left side only */
+#define   OPL3_TREMOLO_DEPTH		0x80
+#define   OPL3_VIBRATO_DEPTH		0x40
+#define	  OPL3_PERCUSSION_ENABLE	0x20
+#define   OPL3_BASSDRUM_ON		0x10
+#define   OPL3_SNAREDRUM_ON		0x08
+#define   OPL3_TOMTOM_ON		0x04
+#define   OPL3_CYMBAL_ON		0x02
+#define   OPL3_HIHAT_ON			0x01
+
+/*
+ *    Offsets to the register banks for operators. To get the
+ *      register number just add the operator offset to the bank offset
+ *
+ *      AM/VIB/EG/KSR/Multiple (0x20 to 0x35)
+ */
+#define OPL3_REG_AM_VIB			0x20
+#define   OPL3_TREMOLO_ON		0x80
+#define   OPL3_VIBRATO_ON		0x40
+#define   OPL3_SUSTAIN_ON		0x20
+#define   OPL3_KSR			0x10	/* Key scaling rate */
+#define   OPL3_MULTIPLE_MASK		0x0f	/* Frequency multiplier */
+
+ /*
+  *   KSL/Total level (0x40 to 0x55)
+  */
+#define OPL3_REG_KSL_LEVEL		0x40
+#define   OPL3_KSL_MASK			0xc0	/* Envelope scaling bits */
+#define   OPL3_TOTAL_LEVEL_MASK		0x3f	/* Strength (volume) of OP */
+
+/*
+ *    Attack / Decay rate (0x60 to 0x75)
+ */
+#define OPL3_REG_ATTACK_DECAY		0x60
+#define   OPL3_ATTACK_MASK		0xf0
+#define   OPL3_DECAY_MASK		0x0f
+
+/*
+ * Sustain level / Release rate (0x80 to 0x95)
+ */
+#define OPL3_REG_SUSTAIN_RELEASE	0x80
+#define   OPL3_SUSTAIN_MASK		0xf0
+#define   OPL3_RELEASE_MASK		0x0f
+
+/*
+ * Wave select (0xE0 to 0xF5)
+ */
+#define OPL3_REG_WAVE_SELECT		0xe0
+#define   OPL3_WAVE_SELECT_MASK		0x07
+
+/*
+ *    Offsets to the register banks for voices. Just add to the
+ *      voice number to get the register number.
+ *
+ *      F-Number low bits (0xA0 to 0xA8).
+ */
+#define OPL3_REG_FNUM_LOW		0xa0
+
+/*
+ *    F-number high bits / Key on / Block (octave) (0xB0 to 0xB8)
+ */
+#define OPL3_REG_KEYON_BLOCK		0xb0
+#define	  OPL3_KEYON_BIT		0x20
+#define	  OPL3_BLOCKNUM_MASK		0x1c
+#define   OPL3_FNUM_HIGH_MASK		0x03
+
+/*
+ *    Feedback / Connection (0xc0 to 0xc8)
+ *
+ *      These registers have two new bits when the OPL-3 mode
+ *      is selected. These bits controls connecting the voice
+ *      to the stereo channels. For 4 OP voices this bit is
+ *      defined in the second half of the voice (add 3 to the
+ *      register offset).
+ *
+ *      For 4 OP voices the connection bit is used in the
+ *      both halves (gives 4 ways to connect the operators).
+ */
+#define OPL3_REG_FEEDBACK_CONNECTION	0xc0
+#define   OPL3_FEEDBACK_MASK		0x0e	/* Valid just for 1st OP of a voice */
+#define   OPL3_CONNECTION_BIT		0x01
+/*
+ *    In the 4 OP mode there is four possible configurations how the
+ *      operators can be connected together (in 2 OP modes there is just
+ *      AM or FM). The 4 OP connection mode is defined by the rightmost
+ *      bit of the FEEDBACK_CONNECTION (0xC0-0xC8) on the both halves.
+ *
+ *      First half      Second half     Mode
+ *
+ *                                       +---+
+ *                                       v   |
+ *      0               0               >+-1-+--2--3--4-->
+ *
+ *
+ *                                      
+ *                                       +---+
+ *                                       |   |
+ *      0               1               >+-1-+--2-+
+ *                                                |->
+ *                                      >--3----4-+
+ *                                      
+ *                                       +---+
+ *                                       |   |
+ *      1               0               >+-1-+-----+
+ *                                                 |->
+ *                                      >--2--3--4-+
+ *
+ *                                       +---+
+ *                                       |   |
+ *      1               1               >+-1-+--+
+ *                                              |
+ *                                      >--2--3-+->
+ *                                              |
+ *                                      >--4----+
+ */
+#define   OPL3_STEREO_BITS		0x30	/* OPL-3 only */
+#define     OPL3_VOICE_TO_LEFT		0x10
+#define     OPL3_VOICE_TO_RIGHT		0x20
+
+/*
+
+ */
+
+#define OPL3_LEFT		0x0000
+#define OPL3_RIGHT		0x0100
+
+#define OPL3_HW_AUTO		0x0000
+#define OPL3_HW_OPL2		0x0200
+#define OPL3_HW_OPL3		0x0300
+#define OPL3_HW_OPL3_SV		0x0301	/* S3 SonicVibes */
+#define OPL3_HW_OPL3_CS		0x0302	/* CS4232/CS4236+ */
+#define OPL3_HW_OPL3_FM801	0x0303	/* FM801 */
+#define OPL3_HW_OPL3_CS4281	0x0304	/* CS4281 */
+#define OPL3_HW_OPL4		0x0400	/* YMF278B/YMF295 */
+#define OPL3_HW_OPL4_ML		0x0401	/* YMF704/YMF721 */
+#define OPL3_HW_MASK		0xff00
+
+#define MAX_OPL2_VOICES		9
+#define MAX_OPL3_VOICES		18
+
+struct snd_opl3;
+
+/*
+ * Instrument record, aka "Patch"
+ */
+
+/* FM operator */
+struct fm_operator {
+	unsigned char am_vib;
+	unsigned char ksl_level;
+	unsigned char attack_decay;
+	unsigned char sustain_release;
+	unsigned char wave_select;
+} __attribute__((packed));
+
+/* Instrument data */
+struct fm_instrument {
+	struct fm_operator op[4];
+	unsigned char feedback_connection[2];
+	unsigned char echo_delay;
+	unsigned char echo_atten;
+	unsigned char chorus_spread;
+	unsigned char trnsps;
+	unsigned char fix_dur;
+	unsigned char modes;
+	unsigned char fix_key;
+};
+
+/* type */
+#define FM_PATCH_OPL2	0x01		/* OPL2 2 operators FM instrument */
+#define FM_PATCH_OPL3	0x02		/* OPL3 4 operators FM instrument */
+
+/* Instrument record */
+struct fm_patch {
+	unsigned char prog;
+	unsigned char bank;
+	unsigned char type;
+	struct fm_instrument inst;
+	char name[24];
+	struct fm_patch *next;
+};
+
+
+/*
+ * A structure to keep track of each hardware voice
+ */
+struct snd_opl3_voice {
+	int  state;		/* status */
+#define SNDRV_OPL3_ST_OFF		0	/* Not playing */
+#define SNDRV_OPL3_ST_ON_2OP	1	/* 2op voice is allocated */
+#define SNDRV_OPL3_ST_ON_4OP	2	/* 4op voice is allocated */
+#define SNDRV_OPL3_ST_NOT_AVAIL	-1	/* voice is not available */
+
+	unsigned int time;	/* An allocation time */
+	unsigned char note;	/* Note currently assigned to this voice */
+
+	unsigned long note_off;	/* note-off time */
+	int note_off_check;	/* check note-off time */
+
+	unsigned char keyon_reg;	/* KON register shadow */
+
+	struct snd_midi_channel *chan;	/* Midi channel for this note */
+};
+
+struct snd_opl3 {
+	unsigned long l_port;
+	unsigned long r_port;
+	struct resource *res_l_port;
+	struct resource *res_r_port;
+	unsigned short hardware;
+	/* hardware access */
+	void (*command) (struct snd_opl3 * opl3, unsigned short cmd, unsigned char val);
+	unsigned short timer_enable;
+	int seq_dev_num;	/* sequencer device number */
+	struct snd_timer *timer1;
+	struct snd_timer *timer2;
+	spinlock_t timer_lock;
+
+	void *private_data;
+	void (*private_free)(struct snd_opl3 *);
+
+	struct snd_hwdep *hwdep;
+	spinlock_t reg_lock;
+	struct snd_card *card;		/* The card that this belongs to */
+	unsigned char fm_mode;		/* OPL mode, see SNDRV_DM_FM_MODE_XXX */
+	unsigned char rhythm;		/* percussion mode flag */
+	unsigned char max_voices;	/* max number of voices */
+#if defined(CONFIG_SND_SEQUENCER) || defined(CONFIG_SND_SEQUENCER_MODULE)
+#define SNDRV_OPL3_MODE_SYNTH 0		/* OSS - voices allocated by application */
+#define SNDRV_OPL3_MODE_SEQ 1		/* ALSA - driver handles voice allocation */
+	int synth_mode;			/* synth mode */
+	int seq_client;
+
+	struct snd_seq_device *seq_dev;	/* sequencer device */
+	struct snd_midi_channel_set * chset;
+
+#ifdef CONFIG_SND_SEQUENCER_OSS
+	struct snd_seq_device *oss_seq_dev;	/* OSS sequencer device */
+	struct snd_midi_channel_set * oss_chset;
+#endif
+ 
+#define OPL3_PATCH_HASH_SIZE	32
+	struct fm_patch *patch_table[OPL3_PATCH_HASH_SIZE];
+
+	struct snd_opl3_voice voices[MAX_OPL3_VOICES]; /* Voices (OPL3 'channel') */
+	int use_time;			/* allocation counter */
+
+	unsigned short connection_reg;	/* connection reg shadow */
+	unsigned char drum_reg;		/* percussion reg shadow */
+
+	spinlock_t voice_lock;		/* Lock for voice access */
+
+	struct timer_list tlist;	/* timer for note-offs and effects */
+	int sys_timer_status;		/* system timer run status */
+	spinlock_t sys_timer_lock;	/* Lock for system timer access */
+#endif
+};
+
+/* opl3.c */
+void snd_opl3_interrupt(struct snd_hwdep * hw);
+int snd_opl3_new(struct snd_card *card, unsigned short hardware,
+		 struct snd_opl3 **ropl3);
+int snd_opl3_init(struct snd_opl3 *opl3);
+int snd_opl3_create(struct snd_card *card,
+		    unsigned long l_port, unsigned long r_port,
+		    unsigned short hardware,
+		    int integrated,
+		    struct snd_opl3 ** opl3);
+int snd_opl3_timer_new(struct snd_opl3 * opl3, int timer1_dev, int timer2_dev);
+int snd_opl3_hwdep_new(struct snd_opl3 * opl3, int device, int seq_device,
+		       struct snd_hwdep ** rhwdep);
+
+/* opl3_synth */
+int snd_opl3_open(struct snd_hwdep * hw, struct file *file);
+int snd_opl3_ioctl(struct snd_hwdep * hw, struct file *file,
+		   unsigned int cmd, unsigned long arg);
+int snd_opl3_release(struct snd_hwdep * hw, struct file *file);
+
+void snd_opl3_reset(struct snd_opl3 * opl3);
+
+#if defined(CONFIG_SND_SEQUENCER) || defined(CONFIG_SND_SEQUENCER_MODULE)
+long snd_opl3_write(struct snd_hwdep *hw, const char __user *buf, long count,
+		    loff_t *offset);
+int snd_opl3_load_patch(struct snd_opl3 *opl3,
+			int prog, int bank, int type,
+			const char *name,
+			const unsigned char *ext,
+			const unsigned char *data);
+struct fm_patch *snd_opl3_find_patch(struct snd_opl3 *opl3, int prog, int bank,
+				     int create_patch);
+void snd_opl3_clear_patches(struct snd_opl3 *opl3);
+#else
+#define snd_opl3_write	NULL
+static inline void snd_opl3_clear_patches(struct snd_opl3 *opl3) {}
+#endif
+
+#endif /* __SOUND_OPL3_H */
diff --git a/include/sound/opl4.h b/include/sound/opl4.h
new file mode 100644
index 00000000..60ae8454
--- /dev/null
+++ b/include/sound/opl4.h
@@ -0,0 +1,32 @@
+#ifndef __SOUND_OPL4_H
+#define __SOUND_OPL4_H
+
+/*
+ * Global definitions for the OPL4 driver
+ * Copyright (c) 2003 by Clemens Ladisch <clemens@ladisch.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <sound/opl3.h>
+
+struct snd_opl4;
+
+extern int snd_opl4_create(struct snd_card *card,
+			   unsigned long fm_port, unsigned long pcm_port,
+			   int seq_device,
+			   struct snd_opl3 **opl3, struct snd_opl4 **opl4);
+
+#endif /* __SOUND_OPL4_H */
diff --git a/include/sound/pcm-indirect.h b/include/sound/pcm-indirect.h
new file mode 100644
index 00000000..1df7acaa
--- /dev/null
+++ b/include/sound/pcm-indirect.h
@@ -0,0 +1,177 @@
+/*
+ * Helper functions for indirect PCM data transfer
+ *
+ *  Copyright (c) by Takashi Iwai <tiwai@suse.de>
+ *                   Jaroslav Kysela <perex@perex.cz>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __SOUND_PCM_INDIRECT_H
+#define __SOUND_PCM_INDIRECT_H
+
+#include <sound/pcm.h>
+
+struct snd_pcm_indirect {
+	unsigned int hw_buffer_size;	/* Byte size of hardware buffer */
+	unsigned int hw_queue_size;	/* Max queue size of hw buffer (0 = buffer size) */
+	unsigned int hw_data;	/* Offset to next dst (or src) in hw ring buffer */
+	unsigned int hw_io;	/* Ring buffer hw pointer */
+	int hw_ready;		/* Bytes ready for play (or captured) in hw ring buffer */
+	unsigned int sw_buffer_size;	/* Byte size of software buffer */
+	unsigned int sw_data;	/* Offset to next dst (or src) in sw ring buffer */
+	unsigned int sw_io;	/* Current software pointer in bytes */
+	int sw_ready;		/* Bytes ready to be transferred to/from hw */
+	snd_pcm_uframes_t appl_ptr;	/* Last seen appl_ptr */
+};
+
+typedef void (*snd_pcm_indirect_copy_t)(struct snd_pcm_substream *substream,
+					struct snd_pcm_indirect *rec, size_t bytes);
+
+/*
+ * helper function for playback ack callback
+ */
+static inline void
+snd_pcm_indirect_playback_transfer(struct snd_pcm_substream *substream,
+				   struct snd_pcm_indirect *rec,
+				   snd_pcm_indirect_copy_t copy)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	snd_pcm_uframes_t appl_ptr = runtime->control->appl_ptr;
+	snd_pcm_sframes_t diff = appl_ptr - rec->appl_ptr;
+	int qsize;
+
+	if (diff) {
+		if (diff < -(snd_pcm_sframes_t) (runtime->boundary / 2))
+			diff += runtime->boundary;
+		rec->sw_ready += (int)frames_to_bytes(runtime, diff);
+		rec->appl_ptr = appl_ptr;
+	}
+	qsize = rec->hw_queue_size ? rec->hw_queue_size : rec->hw_buffer_size;
+	while (rec->hw_ready < qsize && rec->sw_ready > 0) {
+		unsigned int hw_to_end = rec->hw_buffer_size - rec->hw_data;
+		unsigned int sw_to_end = rec->sw_buffer_size - rec->sw_data;
+		unsigned int bytes = qsize - rec->hw_ready;
+		if (rec->sw_ready < (int)bytes)
+			bytes = rec->sw_ready;
+		if (hw_to_end < bytes)
+			bytes = hw_to_end;
+		if (sw_to_end < bytes)
+			bytes = sw_to_end;
+		if (! bytes)
+			break;
+		copy(substream, rec, bytes);
+		rec->hw_data += bytes;
+		if (rec->hw_data == rec->hw_buffer_size)
+			rec->hw_data = 0;
+		rec->sw_data += bytes;
+		if (rec->sw_data == rec->sw_buffer_size)
+			rec->sw_data = 0;
+		rec->hw_ready += bytes;
+		rec->sw_ready -= bytes;
+	}
+}
+
+/*
+ * helper function for playback pointer callback
+ * ptr = current byte pointer
+ */
+static inline snd_pcm_uframes_t
+snd_pcm_indirect_playback_pointer(struct snd_pcm_substream *substream,
+				  struct snd_pcm_indirect *rec, unsigned int ptr)
+{
+	int bytes = ptr - rec->hw_io;
+	if (bytes < 0)
+		bytes += rec->hw_buffer_size;
+	rec->hw_io = ptr;
+	rec->hw_ready -= bytes;
+	rec->sw_io += bytes;
+	if (rec->sw_io >= rec->sw_buffer_size)
+		rec->sw_io -= rec->sw_buffer_size;
+	if (substream->ops->ack)
+		substream->ops->ack(substream);
+	return bytes_to_frames(substream->runtime, rec->sw_io);
+}
+
+
+/*
+ * helper function for capture ack callback
+ */
+static inline void
+snd_pcm_indirect_capture_transfer(struct snd_pcm_substream *substream,
+				  struct snd_pcm_indirect *rec,
+				  snd_pcm_indirect_copy_t copy)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	snd_pcm_uframes_t appl_ptr = runtime->control->appl_ptr;
+	snd_pcm_sframes_t diff = appl_ptr - rec->appl_ptr;
+
+	if (diff) {
+		if (diff < -(snd_pcm_sframes_t) (runtime->boundary / 2))
+			diff += runtime->boundary;
+		rec->sw_ready -= frames_to_bytes(runtime, diff);
+		rec->appl_ptr = appl_ptr;
+	}
+	while (rec->hw_ready > 0 && 
+	       rec->sw_ready < (int)rec->sw_buffer_size) {
+		size_t hw_to_end = rec->hw_buffer_size - rec->hw_data;
+		size_t sw_to_end = rec->sw_buffer_size - rec->sw_data;
+		size_t bytes = rec->sw_buffer_size - rec->sw_ready;
+		if (rec->hw_ready < (int)bytes)
+			bytes = rec->hw_ready;
+		if (hw_to_end < bytes)
+			bytes = hw_to_end;
+		if (sw_to_end < bytes)
+			bytes = sw_to_end;
+		if (! bytes)
+			break;
+		copy(substream, rec, bytes);
+		rec->hw_data += bytes;
+		if ((int)rec->hw_data == rec->hw_buffer_size)
+			rec->hw_data = 0;
+		rec->sw_data += bytes;
+		if (rec->sw_data == rec->sw_buffer_size)
+			rec->sw_data = 0;
+		rec->hw_ready -= bytes;
+		rec->sw_ready += bytes;
+	}
+}
+
+/*
+ * helper function for capture pointer callback,
+ * ptr = current byte pointer
+ */
+static inline snd_pcm_uframes_t
+snd_pcm_indirect_capture_pointer(struct snd_pcm_substream *substream,
+				 struct snd_pcm_indirect *rec, unsigned int ptr)
+{
+	int qsize;
+	int bytes = ptr - rec->hw_io;
+	if (bytes < 0)
+		bytes += rec->hw_buffer_size;
+	rec->hw_io = ptr;
+	rec->hw_ready += bytes;
+	qsize = rec->hw_queue_size ? rec->hw_queue_size : rec->hw_buffer_size;
+	if (rec->hw_ready > qsize)
+		return SNDRV_PCM_POS_XRUN;
+	rec->sw_io += bytes;
+	if (rec->sw_io >= rec->sw_buffer_size)
+		rec->sw_io -= rec->sw_buffer_size;
+	if (substream->ops->ack)
+		substream->ops->ack(substream);
+	return bytes_to_frames(substream->runtime, rec->sw_io);
+}
+
+#endif /* __SOUND_PCM_INDIRECT_H */
diff --git a/include/sound/pcm.h b/include/sound/pcm.h
new file mode 100644
index 00000000..0d111281
--- /dev/null
+++ b/include/sound/pcm.h
@@ -0,0 +1,1076 @@
+#ifndef __SOUND_PCM_H
+#define __SOUND_PCM_H
+
+/*
+ *  Digital Audio (PCM) abstract layer
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ *                   Abramo Bagnara <abramo@alsa-project.org>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <sound/asound.h>
+#include <sound/memalloc.h>
+#include <sound/minors.h>
+#include <linux/poll.h>
+#include <linux/mm.h>
+#include <linux/bitops.h>
+#include <linux/pm_qos.h>
+
+#define snd_pcm_substream_chip(substream) ((substream)->private_data)
+#define snd_pcm_chip(pcm) ((pcm)->private_data)
+
+#if defined(CONFIG_SND_PCM_OSS) || defined(CONFIG_SND_PCM_OSS_MODULE)
+#include "pcm_oss.h"
+#endif
+
+/*
+ *  Hardware (lowlevel) section
+ */
+
+struct snd_pcm_hardware {
+	unsigned int info;		/* SNDRV_PCM_INFO_* */
+	u64 formats;			/* SNDRV_PCM_FMTBIT_* */
+	unsigned int rates;		/* SNDRV_PCM_RATE_* */
+	unsigned int rate_min;		/* min rate */
+	unsigned int rate_max;		/* max rate */
+	unsigned int channels_min;	/* min channels */
+	unsigned int channels_max;	/* max channels */
+	size_t buffer_bytes_max;	/* max buffer size */
+	size_t period_bytes_min;	/* min period size */
+	size_t period_bytes_max;	/* max period size */
+	unsigned int periods_min;	/* min # of periods */
+	unsigned int periods_max;	/* max # of periods */
+	size_t fifo_size;		/* fifo size in bytes */
+};
+
+struct snd_pcm_substream;
+
+struct snd_pcm_ops {
+	int (*open)(struct snd_pcm_substream *substream);
+	int (*close)(struct snd_pcm_substream *substream);
+	int (*ioctl)(struct snd_pcm_substream * substream,
+		     unsigned int cmd, void *arg);
+	int (*hw_params)(struct snd_pcm_substream *substream,
+			 struct snd_pcm_hw_params *params);
+	int (*hw_free)(struct snd_pcm_substream *substream);
+	int (*prepare)(struct snd_pcm_substream *substream);
+	int (*trigger)(struct snd_pcm_substream *substream, int cmd);
+	snd_pcm_uframes_t (*pointer)(struct snd_pcm_substream *substream);
+	int (*copy)(struct snd_pcm_substream *substream, int channel,
+		    snd_pcm_uframes_t pos,
+		    void __user *buf, snd_pcm_uframes_t count);
+	int (*silence)(struct snd_pcm_substream *substream, int channel, 
+		       snd_pcm_uframes_t pos, snd_pcm_uframes_t count);
+	struct page *(*page)(struct snd_pcm_substream *substream,
+			     unsigned long offset);
+	int (*mmap)(struct snd_pcm_substream *substream, struct vm_area_struct *vma);
+	int (*ack)(struct snd_pcm_substream *substream);
+};
+
+/*
+ *
+ */
+
+#if defined(CONFIG_SND_DYNAMIC_MINORS)
+#define SNDRV_PCM_DEVICES	(SNDRV_OS_MINORS-2)
+#else
+#define SNDRV_PCM_DEVICES	8
+#endif
+
+#define SNDRV_PCM_IOCTL1_FALSE		((void *)0)
+#define SNDRV_PCM_IOCTL1_TRUE		((void *)1)
+
+#define SNDRV_PCM_IOCTL1_RESET		0
+#define SNDRV_PCM_IOCTL1_INFO		1
+#define SNDRV_PCM_IOCTL1_CHANNEL_INFO	2
+#define SNDRV_PCM_IOCTL1_GSTATE		3
+#define SNDRV_PCM_IOCTL1_FIFO_SIZE	4
+
+#define SNDRV_PCM_TRIGGER_STOP		0
+#define SNDRV_PCM_TRIGGER_START		1
+#define SNDRV_PCM_TRIGGER_PAUSE_PUSH	3
+#define SNDRV_PCM_TRIGGER_PAUSE_RELEASE	4
+#define SNDRV_PCM_TRIGGER_SUSPEND	5
+#define SNDRV_PCM_TRIGGER_RESUME	6
+
+#define SNDRV_PCM_POS_XRUN		((snd_pcm_uframes_t)-1)
+
+/* If you change this don't forget to change rates[] table in pcm_native.c */
+#define SNDRV_PCM_RATE_5512		(1<<0)		/* 5512Hz */
+#define SNDRV_PCM_RATE_8000		(1<<1)		/* 8000Hz */
+#define SNDRV_PCM_RATE_11025		(1<<2)		/* 11025Hz */
+#define SNDRV_PCM_RATE_16000		(1<<3)		/* 16000Hz */
+#define SNDRV_PCM_RATE_22050		(1<<4)		/* 22050Hz */
+#define SNDRV_PCM_RATE_32000		(1<<5)		/* 32000Hz */
+#define SNDRV_PCM_RATE_44100		(1<<6)		/* 44100Hz */
+#define SNDRV_PCM_RATE_48000		(1<<7)		/* 48000Hz */
+#define SNDRV_PCM_RATE_64000		(1<<8)		/* 64000Hz */
+#define SNDRV_PCM_RATE_88200		(1<<9)		/* 88200Hz */
+#define SNDRV_PCM_RATE_96000		(1<<10)		/* 96000Hz */
+#define SNDRV_PCM_RATE_176400		(1<<11)		/* 176400Hz */
+#define SNDRV_PCM_RATE_192000		(1<<12)		/* 192000Hz */
+
+#define SNDRV_PCM_RATE_CONTINUOUS	(1<<30)		/* continuous range */
+#define SNDRV_PCM_RATE_KNOT		(1<<31)		/* supports more non-continuos rates */
+
+#define SNDRV_PCM_RATE_8000_44100	(SNDRV_PCM_RATE_8000|SNDRV_PCM_RATE_11025|\
+					 SNDRV_PCM_RATE_16000|SNDRV_PCM_RATE_22050|\
+					 SNDRV_PCM_RATE_32000|SNDRV_PCM_RATE_44100)
+#define SNDRV_PCM_RATE_8000_48000	(SNDRV_PCM_RATE_8000_44100|SNDRV_PCM_RATE_48000)
+#define SNDRV_PCM_RATE_8000_96000	(SNDRV_PCM_RATE_8000_48000|SNDRV_PCM_RATE_64000|\
+					 SNDRV_PCM_RATE_88200|SNDRV_PCM_RATE_96000)
+#define SNDRV_PCM_RATE_8000_192000	(SNDRV_PCM_RATE_8000_96000|SNDRV_PCM_RATE_176400|\
+					 SNDRV_PCM_RATE_192000)
+#define _SNDRV_PCM_FMTBIT(fmt)		(1ULL << (__force int)SNDRV_PCM_FORMAT_##fmt)
+#define SNDRV_PCM_FMTBIT_S8		_SNDRV_PCM_FMTBIT(S8)
+#define SNDRV_PCM_FMTBIT_U8		_SNDRV_PCM_FMTBIT(U8)
+#define SNDRV_PCM_FMTBIT_S16_LE		_SNDRV_PCM_FMTBIT(S16_LE)
+#define SNDRV_PCM_FMTBIT_S16_BE		_SNDRV_PCM_FMTBIT(S16_BE)
+#define SNDRV_PCM_FMTBIT_U16_LE		_SNDRV_PCM_FMTBIT(U16_LE)
+#define SNDRV_PCM_FMTBIT_U16_BE		_SNDRV_PCM_FMTBIT(U16_BE)
+#define SNDRV_PCM_FMTBIT_S24_LE		_SNDRV_PCM_FMTBIT(S24_LE)
+#define SNDRV_PCM_FMTBIT_S24_BE		_SNDRV_PCM_FMTBIT(S24_BE)
+#define SNDRV_PCM_FMTBIT_U24_LE		_SNDRV_PCM_FMTBIT(U24_LE)
+#define SNDRV_PCM_FMTBIT_U24_BE		_SNDRV_PCM_FMTBIT(U24_BE)
+#define SNDRV_PCM_FMTBIT_S32_LE		_SNDRV_PCM_FMTBIT(S32_LE)
+#define SNDRV_PCM_FMTBIT_S32_BE		_SNDRV_PCM_FMTBIT(S32_BE)
+#define SNDRV_PCM_FMTBIT_U32_LE		_SNDRV_PCM_FMTBIT(U32_LE)
+#define SNDRV_PCM_FMTBIT_U32_BE		_SNDRV_PCM_FMTBIT(U32_BE)
+#define SNDRV_PCM_FMTBIT_FLOAT_LE	_SNDRV_PCM_FMTBIT(FLOAT_LE)
+#define SNDRV_PCM_FMTBIT_FLOAT_BE	_SNDRV_PCM_FMTBIT(FLOAT_BE)
+#define SNDRV_PCM_FMTBIT_FLOAT64_LE	_SNDRV_PCM_FMTBIT(FLOAT64_LE)
+#define SNDRV_PCM_FMTBIT_FLOAT64_BE	_SNDRV_PCM_FMTBIT(FLOAT64_BE)
+#define SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE _SNDRV_PCM_FMTBIT(IEC958_SUBFRAME_LE)
+#define SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_BE _SNDRV_PCM_FMTBIT(IEC958_SUBFRAME_BE)
+#define SNDRV_PCM_FMTBIT_MU_LAW		_SNDRV_PCM_FMTBIT(MU_LAW)
+#define SNDRV_PCM_FMTBIT_A_LAW		_SNDRV_PCM_FMTBIT(A_LAW)
+#define SNDRV_PCM_FMTBIT_IMA_ADPCM	_SNDRV_PCM_FMTBIT(IMA_ADPCM)
+#define SNDRV_PCM_FMTBIT_MPEG		_SNDRV_PCM_FMTBIT(MPEG)
+#define SNDRV_PCM_FMTBIT_GSM		_SNDRV_PCM_FMTBIT(GSM)
+#define SNDRV_PCM_FMTBIT_SPECIAL	_SNDRV_PCM_FMTBIT(SPECIAL)
+#define SNDRV_PCM_FMTBIT_S24_3LE	_SNDRV_PCM_FMTBIT(S24_3LE)
+#define SNDRV_PCM_FMTBIT_U24_3LE	_SNDRV_PCM_FMTBIT(U24_3LE)
+#define SNDRV_PCM_FMTBIT_S24_3BE	_SNDRV_PCM_FMTBIT(S24_3BE)
+#define SNDRV_PCM_FMTBIT_U24_3BE	_SNDRV_PCM_FMTBIT(U24_3BE)
+#define SNDRV_PCM_FMTBIT_S20_3LE	_SNDRV_PCM_FMTBIT(S20_3LE)
+#define SNDRV_PCM_FMTBIT_U20_3LE	_SNDRV_PCM_FMTBIT(U20_3LE)
+#define SNDRV_PCM_FMTBIT_S20_3BE	_SNDRV_PCM_FMTBIT(S20_3BE)
+#define SNDRV_PCM_FMTBIT_U20_3BE	_SNDRV_PCM_FMTBIT(U20_3BE)
+#define SNDRV_PCM_FMTBIT_S18_3LE	_SNDRV_PCM_FMTBIT(S18_3LE)
+#define SNDRV_PCM_FMTBIT_U18_3LE	_SNDRV_PCM_FMTBIT(U18_3LE)
+#define SNDRV_PCM_FMTBIT_S18_3BE	_SNDRV_PCM_FMTBIT(S18_3BE)
+#define SNDRV_PCM_FMTBIT_U18_3BE	_SNDRV_PCM_FMTBIT(U18_3BE)
+#define SNDRV_PCM_FMTBIT_G723_24	_SNDRV_PCM_FMTBIT(G723_24)
+#define SNDRV_PCM_FMTBIT_G723_24_1B	_SNDRV_PCM_FMTBIT(G723_24_1B)
+#define SNDRV_PCM_FMTBIT_G723_40	_SNDRV_PCM_FMTBIT(G723_40)
+#define SNDRV_PCM_FMTBIT_G723_40_1B	_SNDRV_PCM_FMTBIT(G723_40_1B)
+
+#ifdef SNDRV_LITTLE_ENDIAN
+#define SNDRV_PCM_FMTBIT_S16		SNDRV_PCM_FMTBIT_S16_LE
+#define SNDRV_PCM_FMTBIT_U16		SNDRV_PCM_FMTBIT_U16_LE
+#define SNDRV_PCM_FMTBIT_S24		SNDRV_PCM_FMTBIT_S24_LE
+#define SNDRV_PCM_FMTBIT_U24		SNDRV_PCM_FMTBIT_U24_LE
+#define SNDRV_PCM_FMTBIT_S32		SNDRV_PCM_FMTBIT_S32_LE
+#define SNDRV_PCM_FMTBIT_U32		SNDRV_PCM_FMTBIT_U32_LE
+#define SNDRV_PCM_FMTBIT_FLOAT		SNDRV_PCM_FMTBIT_FLOAT_LE
+#define SNDRV_PCM_FMTBIT_FLOAT64	SNDRV_PCM_FMTBIT_FLOAT64_LE
+#define SNDRV_PCM_FMTBIT_IEC958_SUBFRAME SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE
+#endif
+#ifdef SNDRV_BIG_ENDIAN
+#define SNDRV_PCM_FMTBIT_S16		SNDRV_PCM_FMTBIT_S16_BE
+#define SNDRV_PCM_FMTBIT_U16		SNDRV_PCM_FMTBIT_U16_BE
+#define SNDRV_PCM_FMTBIT_S24		SNDRV_PCM_FMTBIT_S24_BE
+#define SNDRV_PCM_FMTBIT_U24		SNDRV_PCM_FMTBIT_U24_BE
+#define SNDRV_PCM_FMTBIT_S32		SNDRV_PCM_FMTBIT_S32_BE
+#define SNDRV_PCM_FMTBIT_U32		SNDRV_PCM_FMTBIT_U32_BE
+#define SNDRV_PCM_FMTBIT_FLOAT		SNDRV_PCM_FMTBIT_FLOAT_BE
+#define SNDRV_PCM_FMTBIT_FLOAT64	SNDRV_PCM_FMTBIT_FLOAT64_BE
+#define SNDRV_PCM_FMTBIT_IEC958_SUBFRAME SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_BE
+#endif
+
+struct snd_pcm_file {
+	struct snd_pcm_substream *substream;
+	int no_compat_mmap;
+};
+
+struct snd_pcm_hw_rule;
+typedef int (*snd_pcm_hw_rule_func_t)(struct snd_pcm_hw_params *params,
+				      struct snd_pcm_hw_rule *rule);
+
+struct snd_pcm_hw_rule {
+	unsigned int cond;
+	snd_pcm_hw_rule_func_t func;
+	int var;
+	int deps[4];
+	void *private;
+};
+
+struct snd_pcm_hw_constraints {
+	struct snd_mask masks[SNDRV_PCM_HW_PARAM_LAST_MASK - 
+			 SNDRV_PCM_HW_PARAM_FIRST_MASK + 1];
+	struct snd_interval intervals[SNDRV_PCM_HW_PARAM_LAST_INTERVAL -
+			     SNDRV_PCM_HW_PARAM_FIRST_INTERVAL + 1];
+	unsigned int rules_num;
+	unsigned int rules_all;
+	struct snd_pcm_hw_rule *rules;
+};
+
+static inline struct snd_mask *constrs_mask(struct snd_pcm_hw_constraints *constrs,
+					    snd_pcm_hw_param_t var)
+{
+	return &constrs->masks[var - SNDRV_PCM_HW_PARAM_FIRST_MASK];
+}
+
+static inline struct snd_interval *constrs_interval(struct snd_pcm_hw_constraints *constrs,
+						    snd_pcm_hw_param_t var)
+{
+	return &constrs->intervals[var - SNDRV_PCM_HW_PARAM_FIRST_INTERVAL];
+}
+
+struct snd_ratnum {
+	unsigned int num;
+	unsigned int den_min, den_max, den_step;
+};
+
+struct snd_ratden {
+	unsigned int num_min, num_max, num_step;
+	unsigned int den;
+};
+
+struct snd_pcm_hw_constraint_ratnums {
+	int nrats;
+	struct snd_ratnum *rats;
+};
+
+struct snd_pcm_hw_constraint_ratdens {
+	int nrats;
+	struct snd_ratden *rats;
+};
+
+struct snd_pcm_hw_constraint_list {
+	unsigned int count;
+	const unsigned int *list;
+	unsigned int mask;
+};
+
+struct snd_pcm_hwptr_log;
+
+struct snd_pcm_runtime {
+	/* -- Status -- */
+	struct snd_pcm_substream *trigger_master;
+	struct timespec trigger_tstamp;	/* trigger timestamp */
+	int overrange;
+	snd_pcm_uframes_t avail_max;
+	snd_pcm_uframes_t hw_ptr_base;	/* Position at buffer restart */
+	snd_pcm_uframes_t hw_ptr_interrupt; /* Position at interrupt time */
+	unsigned long hw_ptr_jiffies;	/* Time when hw_ptr is updated */
+	unsigned long hw_ptr_buffer_jiffies; /* buffer time in jiffies */
+	snd_pcm_sframes_t delay;	/* extra delay; typically FIFO size */
+
+	/* -- HW params -- */
+	snd_pcm_access_t access;	/* access mode */
+	snd_pcm_format_t format;	/* SNDRV_PCM_FORMAT_* */
+	snd_pcm_subformat_t subformat;	/* subformat */
+	unsigned int rate;		/* rate in Hz */
+	unsigned int channels;		/* channels */
+	snd_pcm_uframes_t period_size;	/* period size */
+	unsigned int periods;		/* periods */
+	snd_pcm_uframes_t buffer_size;	/* buffer size */
+	snd_pcm_uframes_t min_align;	/* Min alignment for the format */
+	size_t byte_align;
+	unsigned int frame_bits;
+	unsigned int sample_bits;
+	unsigned int info;
+	unsigned int rate_num;
+	unsigned int rate_den;
+	unsigned int no_period_wakeup: 1;
+
+	/* -- SW params -- */
+	int tstamp_mode;		/* mmap timestamp is updated */
+  	unsigned int period_step;
+	snd_pcm_uframes_t start_threshold;
+	snd_pcm_uframes_t stop_threshold;
+	snd_pcm_uframes_t silence_threshold; /* Silence filling happens when
+						noise is nearest than this */
+	snd_pcm_uframes_t silence_size;	/* Silence filling size */
+	snd_pcm_uframes_t boundary;	/* pointers wrap point */
+
+	snd_pcm_uframes_t silence_start; /* starting pointer to silence area */
+	snd_pcm_uframes_t silence_filled; /* size filled with silence */
+
+	union snd_pcm_sync_id sync;	/* hardware synchronization ID */
+
+	/* -- mmap -- */
+	struct snd_pcm_mmap_status *status;
+	struct snd_pcm_mmap_control *control;
+
+	/* -- locking / scheduling -- */
+	snd_pcm_uframes_t twake; 	/* do transfer (!poll) wakeup if non-zero */
+	wait_queue_head_t sleep;	/* poll sleep */
+	wait_queue_head_t tsleep;	/* transfer sleep */
+	struct fasync_struct *fasync;
+
+	/* -- private section -- */
+	void *private_data;
+	void (*private_free)(struct snd_pcm_runtime *runtime);
+
+	/* -- hardware description -- */
+	struct snd_pcm_hardware hw;
+	struct snd_pcm_hw_constraints hw_constraints;
+
+	/* -- interrupt callbacks -- */
+	void (*transfer_ack_begin)(struct snd_pcm_substream *substream);
+	void (*transfer_ack_end)(struct snd_pcm_substream *substream);
+
+	/* -- timer -- */
+	unsigned int timer_resolution;	/* timer resolution */
+	int tstamp_type;		/* timestamp type */
+
+	/* -- DMA -- */           
+	unsigned char *dma_area;	/* DMA area */
+	dma_addr_t dma_addr;		/* physical bus address (not accessible from main CPU) */
+	size_t dma_bytes;		/* size of DMA area */
+
+	struct snd_dma_buffer *dma_buffer_p;	/* allocated buffer */
+
+#if defined(CONFIG_SND_PCM_OSS) || defined(CONFIG_SND_PCM_OSS_MODULE)
+	/* -- OSS things -- */
+	struct snd_pcm_oss_runtime oss;
+#endif
+
+#ifdef CONFIG_SND_PCM_XRUN_DEBUG
+	struct snd_pcm_hwptr_log *hwptr_log;
+#endif
+};
+
+struct snd_pcm_group {		/* keep linked substreams */
+	spinlock_t lock;
+	struct list_head substreams;
+	int count;
+};
+
+struct pid;
+
+struct snd_pcm_substream {
+	struct snd_pcm *pcm;
+	struct snd_pcm_str *pstr;
+	void *private_data;		/* copied from pcm->private_data */
+	int number;
+	char name[32];			/* substream name */
+	int stream;			/* stream (direction) */
+	struct pm_qos_request latency_pm_qos_req; /* pm_qos request */
+	size_t buffer_bytes_max;	/* limit ring buffer size */
+	struct snd_dma_buffer dma_buffer;
+	unsigned int dma_buf_id;
+	size_t dma_max;
+	/* -- hardware operations -- */
+	struct snd_pcm_ops *ops;
+	/* -- runtime information -- */
+	struct snd_pcm_runtime *runtime;
+        /* -- timer section -- */
+	struct snd_timer *timer;		/* timer */
+	unsigned timer_running: 1;	/* time is running */
+	/* -- next substream -- */
+	struct snd_pcm_substream *next;
+	/* -- linked substreams -- */
+	struct list_head link_list;	/* linked list member */
+	struct snd_pcm_group self_group;	/* fake group for non linked substream (with substream lock inside) */
+	struct snd_pcm_group *group;		/* pointer to current group */
+	/* -- assigned files -- */
+	void *file;
+	int ref_count;
+	atomic_t mmap_count;
+	unsigned int f_flags;
+	void (*pcm_release)(struct snd_pcm_substream *);
+	struct pid *pid;
+#if defined(CONFIG_SND_PCM_OSS) || defined(CONFIG_SND_PCM_OSS_MODULE)
+	/* -- OSS things -- */
+	struct snd_pcm_oss_substream oss;
+#endif
+#ifdef CONFIG_SND_VERBOSE_PROCFS
+	struct snd_info_entry *proc_root;
+	struct snd_info_entry *proc_info_entry;
+	struct snd_info_entry *proc_hw_params_entry;
+	struct snd_info_entry *proc_sw_params_entry;
+	struct snd_info_entry *proc_status_entry;
+	struct snd_info_entry *proc_prealloc_entry;
+	struct snd_info_entry *proc_prealloc_max_entry;
+#endif
+	/* misc flags */
+	unsigned int hw_opened: 1;
+};
+
+#define SUBSTREAM_BUSY(substream) ((substream)->ref_count > 0)
+
+
+struct snd_pcm_str {
+	int stream;				/* stream (direction) */
+	struct snd_pcm *pcm;
+	/* -- substreams -- */
+	unsigned int substream_count;
+	unsigned int substream_opened;
+	struct snd_pcm_substream *substream;
+#if defined(CONFIG_SND_PCM_OSS) || defined(CONFIG_SND_PCM_OSS_MODULE)
+	/* -- OSS things -- */
+	struct snd_pcm_oss_stream oss;
+#endif
+#ifdef CONFIG_SND_VERBOSE_PROCFS
+	struct snd_info_entry *proc_root;
+	struct snd_info_entry *proc_info_entry;
+#ifdef CONFIG_SND_PCM_XRUN_DEBUG
+	unsigned int xrun_debug;	/* 0 = disabled, 1 = verbose, 2 = stacktrace */
+	struct snd_info_entry *proc_xrun_debug_entry;
+#endif
+#endif
+};
+
+struct snd_pcm {
+	struct snd_card *card;
+	struct list_head list;
+	int device; /* device number */
+	unsigned int info_flags;
+	unsigned short dev_class;
+	unsigned short dev_subclass;
+	char id[64];
+	char name[80];
+	struct snd_pcm_str streams[2];
+	struct mutex open_mutex;
+	wait_queue_head_t open_wait;
+	void *private_data;
+	void (*private_free) (struct snd_pcm *pcm);
+	struct device *dev; /* actual hw device this belongs to */
+	bool internal; /* pcm is for internal use only */
+#if defined(CONFIG_SND_PCM_OSS) || defined(CONFIG_SND_PCM_OSS_MODULE)
+	struct snd_pcm_oss oss;
+#endif
+};
+
+struct snd_pcm_notify {
+	int (*n_register) (struct snd_pcm * pcm);
+	int (*n_disconnect) (struct snd_pcm * pcm);
+	int (*n_unregister) (struct snd_pcm * pcm);
+	struct list_head list;
+};
+
+/*
+ *  Registering
+ */
+
+extern const struct file_operations snd_pcm_f_ops[2];
+
+int snd_pcm_new(struct snd_card *card, const char *id, int device,
+		int playback_count, int capture_count,
+		struct snd_pcm **rpcm);
+int snd_pcm_new_internal(struct snd_card *card, const char *id, int device,
+		int playback_count, int capture_count,
+		struct snd_pcm **rpcm);
+int snd_pcm_new_stream(struct snd_pcm *pcm, int stream, int substream_count);
+
+int snd_pcm_notify(struct snd_pcm_notify *notify, int nfree);
+
+/*
+ *  Native I/O
+ */
+
+extern rwlock_t snd_pcm_link_rwlock;
+
+int snd_pcm_info(struct snd_pcm_substream *substream, struct snd_pcm_info *info);
+int snd_pcm_info_user(struct snd_pcm_substream *substream,
+		      struct snd_pcm_info __user *info);
+int snd_pcm_status(struct snd_pcm_substream *substream,
+		   struct snd_pcm_status *status);
+int snd_pcm_start(struct snd_pcm_substream *substream);
+int snd_pcm_stop(struct snd_pcm_substream *substream, snd_pcm_state_t status);
+int snd_pcm_drain_done(struct snd_pcm_substream *substream);
+#ifdef CONFIG_PM
+int snd_pcm_suspend(struct snd_pcm_substream *substream);
+int snd_pcm_suspend_all(struct snd_pcm *pcm);
+#endif
+int snd_pcm_kernel_ioctl(struct snd_pcm_substream *substream, unsigned int cmd, void *arg);
+int snd_pcm_open_substream(struct snd_pcm *pcm, int stream, struct file *file,
+			   struct snd_pcm_substream **rsubstream);
+void snd_pcm_release_substream(struct snd_pcm_substream *substream);
+int snd_pcm_attach_substream(struct snd_pcm *pcm, int stream, struct file *file,
+			     struct snd_pcm_substream **rsubstream);
+void snd_pcm_detach_substream(struct snd_pcm_substream *substream);
+void snd_pcm_vma_notify_data(void *client, void *data);
+int snd_pcm_mmap_data(struct snd_pcm_substream *substream, struct file *file, struct vm_area_struct *area);
+
+
+#ifdef CONFIG_SND_DEBUG
+void snd_pcm_debug_name(struct snd_pcm_substream *substream,
+			   char *name, size_t len);
+#else
+static inline void
+snd_pcm_debug_name(struct snd_pcm_substream *substream, char *buf, size_t size)
+{
+	*buf = 0;
+}
+#endif
+
+/*
+ *  PCM library
+ */
+
+static inline int snd_pcm_stream_linked(struct snd_pcm_substream *substream)
+{
+	return substream->group != &substream->self_group;
+}
+
+static inline void snd_pcm_stream_lock(struct snd_pcm_substream *substream)
+{
+	read_lock(&snd_pcm_link_rwlock);
+	spin_lock(&substream->self_group.lock);
+}
+
+static inline void snd_pcm_stream_unlock(struct snd_pcm_substream *substream)
+{
+	spin_unlock(&substream->self_group.lock);
+	read_unlock(&snd_pcm_link_rwlock);
+}
+
+static inline void snd_pcm_stream_lock_irq(struct snd_pcm_substream *substream)
+{
+	read_lock_irq(&snd_pcm_link_rwlock);
+	spin_lock(&substream->self_group.lock);
+}
+
+static inline void snd_pcm_stream_unlock_irq(struct snd_pcm_substream *substream)
+{
+	spin_unlock(&substream->self_group.lock);
+	read_unlock_irq(&snd_pcm_link_rwlock);
+}
+
+#define snd_pcm_stream_lock_irqsave(substream, flags) \
+do { \
+	read_lock_irqsave(&snd_pcm_link_rwlock, (flags)); \
+	spin_lock(&substream->self_group.lock); \
+} while (0)
+
+#define snd_pcm_stream_unlock_irqrestore(substream, flags) \
+do { \
+	spin_unlock(&substream->self_group.lock); \
+	read_unlock_irqrestore(&snd_pcm_link_rwlock, (flags)); \
+} while (0)
+
+#define snd_pcm_group_for_each_entry(s, substream) \
+	list_for_each_entry(s, &substream->group->substreams, link_list)
+
+static inline int snd_pcm_running(struct snd_pcm_substream *substream)
+{
+	return (substream->runtime->status->state == SNDRV_PCM_STATE_RUNNING ||
+		(substream->runtime->status->state == SNDRV_PCM_STATE_DRAINING &&
+		 substream->stream == SNDRV_PCM_STREAM_PLAYBACK));
+}
+
+static inline ssize_t bytes_to_samples(struct snd_pcm_runtime *runtime, ssize_t size)
+{
+	return size * 8 / runtime->sample_bits;
+}
+
+static inline snd_pcm_sframes_t bytes_to_frames(struct snd_pcm_runtime *runtime, ssize_t size)
+{
+	return size * 8 / runtime->frame_bits;
+}
+
+static inline ssize_t samples_to_bytes(struct snd_pcm_runtime *runtime, ssize_t size)
+{
+	return size * runtime->sample_bits / 8;
+}
+
+static inline ssize_t frames_to_bytes(struct snd_pcm_runtime *runtime, snd_pcm_sframes_t size)
+{
+	return size * runtime->frame_bits / 8;
+}
+
+static inline int frame_aligned(struct snd_pcm_runtime *runtime, ssize_t bytes)
+{
+	return bytes % runtime->byte_align == 0;
+}
+
+static inline size_t snd_pcm_lib_buffer_bytes(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	return frames_to_bytes(runtime, runtime->buffer_size);
+}
+
+static inline size_t snd_pcm_lib_period_bytes(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	return frames_to_bytes(runtime, runtime->period_size);
+}
+
+/*
+ *  result is: 0 ... (boundary - 1)
+ */
+static inline snd_pcm_uframes_t snd_pcm_playback_avail(struct snd_pcm_runtime *runtime)
+{
+	snd_pcm_sframes_t avail = runtime->status->hw_ptr + runtime->buffer_size - runtime->control->appl_ptr;
+	if (avail < 0)
+		avail += runtime->boundary;
+	else if ((snd_pcm_uframes_t) avail >= runtime->boundary)
+		avail -= runtime->boundary;
+	return avail;
+}
+
+/*
+ *  result is: 0 ... (boundary - 1)
+ */
+static inline snd_pcm_uframes_t snd_pcm_capture_avail(struct snd_pcm_runtime *runtime)
+{
+	snd_pcm_sframes_t avail = runtime->status->hw_ptr - runtime->control->appl_ptr;
+	if (avail < 0)
+		avail += runtime->boundary;
+	return avail;
+}
+
+static inline snd_pcm_sframes_t snd_pcm_playback_hw_avail(struct snd_pcm_runtime *runtime)
+{
+	return runtime->buffer_size - snd_pcm_playback_avail(runtime);
+}
+
+static inline snd_pcm_sframes_t snd_pcm_capture_hw_avail(struct snd_pcm_runtime *runtime)
+{
+	return runtime->buffer_size - snd_pcm_capture_avail(runtime);
+}
+
+/**
+ * snd_pcm_playback_ready - check whether the playback buffer is available
+ * @substream: the pcm substream instance
+ *
+ * Checks whether enough free space is available on the playback buffer.
+ *
+ * Returns non-zero if available, or zero if not.
+ */
+static inline int snd_pcm_playback_ready(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	return snd_pcm_playback_avail(runtime) >= runtime->control->avail_min;
+}
+
+/**
+ * snd_pcm_capture_ready - check whether the capture buffer is available
+ * @substream: the pcm substream instance
+ *
+ * Checks whether enough capture data is available on the capture buffer.
+ *
+ * Returns non-zero if available, or zero if not.
+ */
+static inline int snd_pcm_capture_ready(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	return snd_pcm_capture_avail(runtime) >= runtime->control->avail_min;
+}
+
+/**
+ * snd_pcm_playback_data - check whether any data exists on the playback buffer
+ * @substream: the pcm substream instance
+ *
+ * Checks whether any data exists on the playback buffer. If stop_threshold
+ * is bigger or equal to boundary, then this function returns always non-zero.
+ *
+ * Returns non-zero if exists, or zero if not.
+ */
+static inline int snd_pcm_playback_data(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	
+	if (runtime->stop_threshold >= runtime->boundary)
+		return 1;
+	return snd_pcm_playback_avail(runtime) < runtime->buffer_size;
+}
+
+/**
+ * snd_pcm_playback_empty - check whether the playback buffer is empty
+ * @substream: the pcm substream instance
+ *
+ * Checks whether the playback buffer is empty.
+ *
+ * Returns non-zero if empty, or zero if not.
+ */
+static inline int snd_pcm_playback_empty(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	return snd_pcm_playback_avail(runtime) >= runtime->buffer_size;
+}
+
+/**
+ * snd_pcm_capture_empty - check whether the capture buffer is empty
+ * @substream: the pcm substream instance
+ *
+ * Checks whether the capture buffer is empty.
+ *
+ * Returns non-zero if empty, or zero if not.
+ */
+static inline int snd_pcm_capture_empty(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	return snd_pcm_capture_avail(runtime) == 0;
+}
+
+static inline void snd_pcm_trigger_done(struct snd_pcm_substream *substream, 
+					struct snd_pcm_substream *master)
+{
+	substream->runtime->trigger_master = master;
+}
+
+static inline int hw_is_mask(int var)
+{
+	return var >= SNDRV_PCM_HW_PARAM_FIRST_MASK &&
+		var <= SNDRV_PCM_HW_PARAM_LAST_MASK;
+}
+
+static inline int hw_is_interval(int var)
+{
+	return var >= SNDRV_PCM_HW_PARAM_FIRST_INTERVAL &&
+		var <= SNDRV_PCM_HW_PARAM_LAST_INTERVAL;
+}
+
+static inline struct snd_mask *hw_param_mask(struct snd_pcm_hw_params *params,
+				     snd_pcm_hw_param_t var)
+{
+	return &params->masks[var - SNDRV_PCM_HW_PARAM_FIRST_MASK];
+}
+
+static inline struct snd_interval *hw_param_interval(struct snd_pcm_hw_params *params,
+					     snd_pcm_hw_param_t var)
+{
+	return &params->intervals[var - SNDRV_PCM_HW_PARAM_FIRST_INTERVAL];
+}
+
+static inline const struct snd_mask *hw_param_mask_c(const struct snd_pcm_hw_params *params,
+					     snd_pcm_hw_param_t var)
+{
+	return &params->masks[var - SNDRV_PCM_HW_PARAM_FIRST_MASK];
+}
+
+static inline const struct snd_interval *hw_param_interval_c(const struct snd_pcm_hw_params *params,
+						     snd_pcm_hw_param_t var)
+{
+	return &params->intervals[var - SNDRV_PCM_HW_PARAM_FIRST_INTERVAL];
+}
+
+#define params_channels(p) \
+	(hw_param_interval_c((p), SNDRV_PCM_HW_PARAM_CHANNELS)->min)
+#define params_rate(p) \
+	(hw_param_interval_c((p), SNDRV_PCM_HW_PARAM_RATE)->min)
+#define params_period_size(p) \
+	(hw_param_interval_c((p), SNDRV_PCM_HW_PARAM_PERIOD_SIZE)->min)
+#define params_periods(p) \
+	(hw_param_interval_c((p), SNDRV_PCM_HW_PARAM_PERIODS)->min)
+#define params_buffer_size(p) \
+	(hw_param_interval_c((p), SNDRV_PCM_HW_PARAM_BUFFER_SIZE)->min)
+#define params_buffer_bytes(p) \
+	(hw_param_interval_c((p), SNDRV_PCM_HW_PARAM_BUFFER_BYTES)->min)
+
+int snd_interval_refine(struct snd_interval *i, const struct snd_interval *v);
+void snd_interval_mul(const struct snd_interval *a, const struct snd_interval *b, struct snd_interval *c);
+void snd_interval_div(const struct snd_interval *a, const struct snd_interval *b, struct snd_interval *c);
+void snd_interval_muldivk(const struct snd_interval *a, const struct snd_interval *b, 
+			  unsigned int k, struct snd_interval *c);
+void snd_interval_mulkdiv(const struct snd_interval *a, unsigned int k,
+			  const struct snd_interval *b, struct snd_interval *c);
+int snd_interval_list(struct snd_interval *i, unsigned int count,
+		      const unsigned int *list, unsigned int mask);
+int snd_interval_ratnum(struct snd_interval *i,
+			unsigned int rats_count, struct snd_ratnum *rats,
+			unsigned int *nump, unsigned int *denp);
+
+void _snd_pcm_hw_params_any(struct snd_pcm_hw_params *params);
+void _snd_pcm_hw_param_setempty(struct snd_pcm_hw_params *params, snd_pcm_hw_param_t var);
+int snd_pcm_hw_params_choose(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params);
+
+int snd_pcm_hw_refine(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params);
+
+int snd_pcm_hw_constraints_init(struct snd_pcm_substream *substream);
+int snd_pcm_hw_constraints_complete(struct snd_pcm_substream *substream);
+
+int snd_pcm_hw_constraint_mask(struct snd_pcm_runtime *runtime, snd_pcm_hw_param_t var,
+			       u_int32_t mask);
+int snd_pcm_hw_constraint_mask64(struct snd_pcm_runtime *runtime, snd_pcm_hw_param_t var,
+				 u_int64_t mask);
+int snd_pcm_hw_constraint_minmax(struct snd_pcm_runtime *runtime, snd_pcm_hw_param_t var,
+				 unsigned int min, unsigned int max);
+int snd_pcm_hw_constraint_integer(struct snd_pcm_runtime *runtime, snd_pcm_hw_param_t var);
+int snd_pcm_hw_constraint_list(struct snd_pcm_runtime *runtime, 
+			       unsigned int cond,
+			       snd_pcm_hw_param_t var,
+			       struct snd_pcm_hw_constraint_list *l);
+int snd_pcm_hw_constraint_ratnums(struct snd_pcm_runtime *runtime, 
+				  unsigned int cond,
+				  snd_pcm_hw_param_t var,
+				  struct snd_pcm_hw_constraint_ratnums *r);
+int snd_pcm_hw_constraint_ratdens(struct snd_pcm_runtime *runtime, 
+				  unsigned int cond,
+				  snd_pcm_hw_param_t var,
+				  struct snd_pcm_hw_constraint_ratdens *r);
+int snd_pcm_hw_constraint_msbits(struct snd_pcm_runtime *runtime, 
+				 unsigned int cond,
+				 unsigned int width,
+				 unsigned int msbits);
+int snd_pcm_hw_constraint_step(struct snd_pcm_runtime *runtime,
+			       unsigned int cond,
+			       snd_pcm_hw_param_t var,
+			       unsigned long step);
+int snd_pcm_hw_constraint_pow2(struct snd_pcm_runtime *runtime,
+			       unsigned int cond,
+			       snd_pcm_hw_param_t var);
+int snd_pcm_hw_rule_noresample(struct snd_pcm_runtime *runtime,
+			       unsigned int base_rate);
+int snd_pcm_hw_rule_add(struct snd_pcm_runtime *runtime,
+			unsigned int cond,
+			int var,
+			snd_pcm_hw_rule_func_t func, void *private,
+			int dep, ...);
+
+int snd_pcm_format_signed(snd_pcm_format_t format);
+int snd_pcm_format_unsigned(snd_pcm_format_t format);
+int snd_pcm_format_linear(snd_pcm_format_t format);
+int snd_pcm_format_little_endian(snd_pcm_format_t format);
+int snd_pcm_format_big_endian(snd_pcm_format_t format);
+#if 0 /* just for DocBook */
+/**
+ * snd_pcm_format_cpu_endian - Check the PCM format is CPU-endian
+ * @format: the format to check
+ *
+ * Returns 1 if the given PCM format is CPU-endian, 0 if
+ * opposite, or a negative error code if endian not specified.
+ */
+int snd_pcm_format_cpu_endian(snd_pcm_format_t format);
+#endif /* DocBook */
+#ifdef SNDRV_LITTLE_ENDIAN
+#define snd_pcm_format_cpu_endian(format) snd_pcm_format_little_endian(format)
+#else
+#define snd_pcm_format_cpu_endian(format) snd_pcm_format_big_endian(format)
+#endif
+int snd_pcm_format_width(snd_pcm_format_t format);			/* in bits */
+int snd_pcm_format_physical_width(snd_pcm_format_t format);		/* in bits */
+ssize_t snd_pcm_format_size(snd_pcm_format_t format, size_t samples);
+const unsigned char *snd_pcm_format_silence_64(snd_pcm_format_t format);
+int snd_pcm_format_set_silence(snd_pcm_format_t format, void *buf, unsigned int frames);
+snd_pcm_format_t snd_pcm_build_linear_format(int width, int unsignd, int big_endian);
+
+void snd_pcm_set_ops(struct snd_pcm * pcm, int direction, struct snd_pcm_ops *ops);
+void snd_pcm_set_sync(struct snd_pcm_substream *substream);
+int snd_pcm_lib_interleave_len(struct snd_pcm_substream *substream);
+int snd_pcm_lib_ioctl(struct snd_pcm_substream *substream,
+		      unsigned int cmd, void *arg);                      
+int snd_pcm_update_state(struct snd_pcm_substream *substream,
+			 struct snd_pcm_runtime *runtime);
+int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream);
+int snd_pcm_playback_xrun_check(struct snd_pcm_substream *substream);
+int snd_pcm_capture_xrun_check(struct snd_pcm_substream *substream);
+int snd_pcm_playback_xrun_asap(struct snd_pcm_substream *substream);
+int snd_pcm_capture_xrun_asap(struct snd_pcm_substream *substream);
+void snd_pcm_playback_silence(struct snd_pcm_substream *substream, snd_pcm_uframes_t new_hw_ptr);
+void snd_pcm_period_elapsed(struct snd_pcm_substream *substream);
+snd_pcm_sframes_t snd_pcm_lib_write(struct snd_pcm_substream *substream,
+				    const void __user *buf,
+				    snd_pcm_uframes_t frames);
+snd_pcm_sframes_t snd_pcm_lib_read(struct snd_pcm_substream *substream,
+				   void __user *buf, snd_pcm_uframes_t frames);
+snd_pcm_sframes_t snd_pcm_lib_writev(struct snd_pcm_substream *substream,
+				     void __user **bufs, snd_pcm_uframes_t frames);
+snd_pcm_sframes_t snd_pcm_lib_readv(struct snd_pcm_substream *substream,
+				    void __user **bufs, snd_pcm_uframes_t frames);
+
+extern const struct snd_pcm_hw_constraint_list snd_pcm_known_rates;
+
+int snd_pcm_limit_hw_rates(struct snd_pcm_runtime *runtime);
+unsigned int snd_pcm_rate_to_rate_bit(unsigned int rate);
+
+static inline void snd_pcm_set_runtime_buffer(struct snd_pcm_substream *substream,
+					      struct snd_dma_buffer *bufp)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	if (bufp) {
+		runtime->dma_buffer_p = bufp;
+		runtime->dma_area = bufp->area;
+		runtime->dma_addr = bufp->addr;
+		runtime->dma_bytes = bufp->bytes;
+	} else {
+		runtime->dma_buffer_p = NULL;
+		runtime->dma_area = NULL;
+		runtime->dma_addr = 0;
+		runtime->dma_bytes = 0;
+	}
+}
+
+/*
+ *  Timer interface
+ */
+
+void snd_pcm_timer_resolution_change(struct snd_pcm_substream *substream);
+void snd_pcm_timer_init(struct snd_pcm_substream *substream);
+void snd_pcm_timer_done(struct snd_pcm_substream *substream);
+
+static inline void snd_pcm_gettime(struct snd_pcm_runtime *runtime,
+				   struct timespec *tv)
+{
+	if (runtime->tstamp_type == SNDRV_PCM_TSTAMP_TYPE_MONOTONIC)
+		do_posix_clock_monotonic_gettime(tv);
+	else
+		getnstimeofday(tv);
+}
+
+/*
+ *  Memory
+ */
+
+int snd_pcm_lib_preallocate_free(struct snd_pcm_substream *substream);
+int snd_pcm_lib_preallocate_free_for_all(struct snd_pcm *pcm);
+int snd_pcm_lib_preallocate_pages(struct snd_pcm_substream *substream,
+				  int type, struct device *data,
+				  size_t size, size_t max);
+int snd_pcm_lib_preallocate_pages_for_all(struct snd_pcm *pcm,
+					  int type, void *data,
+					  size_t size, size_t max);
+int snd_pcm_lib_malloc_pages(struct snd_pcm_substream *substream, size_t size);
+int snd_pcm_lib_free_pages(struct snd_pcm_substream *substream);
+
+int _snd_pcm_lib_alloc_vmalloc_buffer(struct snd_pcm_substream *substream,
+				      size_t size, gfp_t gfp_flags);
+int snd_pcm_lib_free_vmalloc_buffer(struct snd_pcm_substream *substream);
+struct page *snd_pcm_lib_get_vmalloc_page(struct snd_pcm_substream *substream,
+					  unsigned long offset);
+#if 0 /* for kernel-doc */
+/**
+ * snd_pcm_lib_alloc_vmalloc_buffer - allocate virtual DMA buffer
+ * @substream: the substream to allocate the buffer to
+ * @size: the requested buffer size, in bytes
+ *
+ * Allocates the PCM substream buffer using vmalloc(), i.e., the memory is
+ * contiguous in kernel virtual space, but not in physical memory.  Use this
+ * if the buffer is accessed by kernel code but not by device DMA.
+ *
+ * Returns 1 if the buffer was changed, 0 if not changed, or a negative error
+ * code.
+ */
+static int snd_pcm_lib_alloc_vmalloc_buffer
+			(struct snd_pcm_substream *substream, size_t size);
+/**
+ * snd_pcm_lib_alloc_vmalloc_32_buffer - allocate 32-bit-addressable buffer
+ * @substream: the substream to allocate the buffer to
+ * @size: the requested buffer size, in bytes
+ *
+ * This function works like snd_pcm_lib_alloc_vmalloc_buffer(), but uses
+ * vmalloc_32(), i.e., the pages are allocated from 32-bit-addressable memory.
+ */
+static int snd_pcm_lib_alloc_vmalloc_32_buffer
+			(struct snd_pcm_substream *substream, size_t size);
+#endif
+#define snd_pcm_lib_alloc_vmalloc_buffer(subs, size) \
+	_snd_pcm_lib_alloc_vmalloc_buffer \
+			(subs, size, GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO)
+#define snd_pcm_lib_alloc_vmalloc_32_buffer(subs, size) \
+	_snd_pcm_lib_alloc_vmalloc_buffer \
+			(subs, size, GFP_KERNEL | GFP_DMA32 | __GFP_ZERO)
+
+#ifdef CONFIG_SND_DMA_SGBUF
+/*
+ * SG-buffer handling
+ */
+#define snd_pcm_substream_sgbuf(substream) \
+	((substream)->runtime->dma_buffer_p->private_data)
+
+static inline dma_addr_t
+snd_pcm_sgbuf_get_addr(struct snd_pcm_substream *substream, unsigned int ofs)
+{
+	struct snd_sg_buf *sg = snd_pcm_substream_sgbuf(substream);
+	return snd_sgbuf_get_addr(sg, ofs);
+}
+
+static inline void *
+snd_pcm_sgbuf_get_ptr(struct snd_pcm_substream *substream, unsigned int ofs)
+{
+	struct snd_sg_buf *sg = snd_pcm_substream_sgbuf(substream);
+	return snd_sgbuf_get_ptr(sg, ofs);
+}
+
+struct page *snd_pcm_sgbuf_ops_page(struct snd_pcm_substream *substream,
+				    unsigned long offset);
+unsigned int snd_pcm_sgbuf_get_chunk_size(struct snd_pcm_substream *substream,
+					  unsigned int ofs, unsigned int size);
+
+#else /* !SND_DMA_SGBUF */
+/*
+ * fake using a continuous buffer
+ */
+static inline dma_addr_t
+snd_pcm_sgbuf_get_addr(struct snd_pcm_substream *substream, unsigned int ofs)
+{
+	return substream->runtime->dma_addr + ofs;
+}
+
+static inline void *
+snd_pcm_sgbuf_get_ptr(struct snd_pcm_substream *substream, unsigned int ofs)
+{
+	return substream->runtime->dma_area + ofs;
+}
+
+#define snd_pcm_sgbuf_ops_page	NULL
+
+#define snd_pcm_sgbuf_get_chunk_size(subs, ofs, size)	(size)
+
+#endif /* SND_DMA_SGBUF */
+
+/* handle mmap counter - PCM mmap callback should handle this counter properly */
+static inline void snd_pcm_mmap_data_open(struct vm_area_struct *area)
+{
+	struct snd_pcm_substream *substream = (struct snd_pcm_substream *)area->vm_private_data;
+	atomic_inc(&substream->mmap_count);
+}
+
+static inline void snd_pcm_mmap_data_close(struct vm_area_struct *area)
+{
+	struct snd_pcm_substream *substream = (struct snd_pcm_substream *)area->vm_private_data;
+	atomic_dec(&substream->mmap_count);
+}
+
+int snd_pcm_lib_default_mmap(struct snd_pcm_substream *substream,
+			     struct vm_area_struct *area);
+/* mmap for io-memory area */
+#if defined(CONFIG_X86) || defined(CONFIG_PPC) || defined(CONFIG_ALPHA)
+#define SNDRV_PCM_INFO_MMAP_IOMEM	SNDRV_PCM_INFO_MMAP
+int snd_pcm_lib_mmap_iomem(struct snd_pcm_substream *substream, struct vm_area_struct *area);
+#else
+#define SNDRV_PCM_INFO_MMAP_IOMEM	0
+#define snd_pcm_lib_mmap_iomem	NULL
+#endif
+
+#define snd_pcm_lib_mmap_vmalloc NULL
+
+static inline void snd_pcm_limit_isa_dma_size(int dma, size_t *max)
+{
+	*max = dma < 4 ? 64 * 1024 : 128 * 1024;
+}
+
+/*
+ *  Misc
+ */
+
+#define SNDRV_PCM_DEFAULT_CON_SPDIF	(IEC958_AES0_CON_EMPHASIS_NONE|\
+					 (IEC958_AES1_CON_ORIGINAL<<8)|\
+					 (IEC958_AES1_CON_PCM_CODER<<8)|\
+					 (IEC958_AES3_CON_FS_48000<<24))
+
+#define PCM_RUNTIME_CHECK(sub) snd_BUG_ON(!(sub) || !(sub)->runtime)
+
+const char *snd_pcm_format_name(snd_pcm_format_t format);
+
+#endif /* __SOUND_PCM_H */
diff --git a/include/sound/pcm_oss.h b/include/sound/pcm_oss.h
new file mode 100644
index 00000000..760c969d
--- /dev/null
+++ b/include/sound/pcm_oss.h
@@ -0,0 +1,89 @@
+#ifndef __SOUND_PCM_OSS_H
+#define __SOUND_PCM_OSS_H
+
+/*
+ *  Digital Audio (PCM) - OSS compatibility abstract layer
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+struct snd_pcm_oss_setup {
+	char *task_name;
+	unsigned int disable:1,
+		     direct:1,
+		     block:1,
+		     nonblock:1,
+		     partialfrag:1,
+		     nosilence:1,
+		     buggyptr:1;
+	unsigned int periods;
+	unsigned int period_size;
+	struct snd_pcm_oss_setup *next;
+};
+
+struct snd_pcm_oss_runtime {
+	unsigned params: 1,			/* format/parameter change */
+		 prepare: 1,			/* need to prepare the operation */
+		 trigger: 1,			/* trigger flag */
+		 sync_trigger: 1;		/* sync trigger flag */
+	int rate;				/* requested rate */
+	int format;				/* requested OSS format */
+	unsigned int channels;			/* requested channels */
+	unsigned int fragshift;
+	unsigned int maxfrags;
+	unsigned int subdivision;		/* requested subdivision */
+	size_t period_bytes;			/* requested period size */
+	size_t period_frames;			/* period frames for poll */
+	size_t period_ptr;			/* actual write pointer to period */
+	unsigned int periods;
+	size_t buffer_bytes;			/* requested buffer size */
+	size_t bytes;				/* total # bytes processed */
+	size_t mmap_bytes;
+	char *buffer;				/* vmallocated period */
+	size_t buffer_used;			/* used length from period buffer */
+	struct mutex params_lock;
+#ifdef CONFIG_SND_PCM_OSS_PLUGINS
+	struct snd_pcm_plugin *plugin_first;
+	struct snd_pcm_plugin *plugin_last;
+#endif
+	unsigned int prev_hw_ptr_period;
+};
+
+struct snd_pcm_oss_file {
+	struct snd_pcm_substream *streams[2];
+};
+
+struct snd_pcm_oss_substream {
+	unsigned oss: 1;			/* oss mode */
+	struct snd_pcm_oss_setup setup;		/* active setup */
+};
+
+struct snd_pcm_oss_stream {
+	struct snd_pcm_oss_setup *setup_list;	/* setup list */
+	struct mutex setup_mutex;
+#ifdef CONFIG_SND_VERBOSE_PROCFS
+	struct snd_info_entry *proc_entry;
+#endif
+};
+
+struct snd_pcm_oss {
+	int reg;
+	unsigned int reg_mask;
+};
+
+#endif /* __SOUND_PCM_OSS_H */
diff --git a/include/sound/pcm_params.h b/include/sound/pcm_params.h
new file mode 100644
index 00000000..f494f1e3
--- /dev/null
+++ b/include/sound/pcm_params.h
@@ -0,0 +1,355 @@
+#ifndef __SOUND_PCM_PARAMS_H
+#define __SOUND_PCM_PARAMS_H
+
+/*
+ *  PCM params helpers
+ *  Copyright (c) by Abramo Bagnara <abramo@alsa-project.org>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+int snd_pcm_hw_param_first(struct snd_pcm_substream *pcm, 
+			   struct snd_pcm_hw_params *params,
+			   snd_pcm_hw_param_t var, int *dir);
+int snd_pcm_hw_param_last(struct snd_pcm_substream *pcm, 
+			  struct snd_pcm_hw_params *params,
+			  snd_pcm_hw_param_t var, int *dir);
+int snd_pcm_hw_param_value(const struct snd_pcm_hw_params *params,
+			   snd_pcm_hw_param_t var, int *dir);
+
+#define SNDRV_MASK_BITS	64	/* we use so far 64bits only */
+#define SNDRV_MASK_SIZE	(SNDRV_MASK_BITS / 32)
+#define MASK_OFS(i)	((i) >> 5)
+#define MASK_BIT(i)	(1U << ((i) & 31))
+
+static inline unsigned int ld2(u_int32_t v)
+{
+        unsigned r = 0;
+
+        if (v >= 0x10000) {
+                v >>= 16;
+                r += 16;
+        }
+        if (v >= 0x100) {
+                v >>= 8;
+                r += 8;
+        }
+        if (v >= 0x10) {
+                v >>= 4;
+                r += 4;
+        }
+        if (v >= 4) {
+                v >>= 2;
+                r += 2;
+        }
+        if (v >= 2)
+                r++;
+        return r;
+}
+
+static inline size_t snd_mask_sizeof(void)
+{
+	return sizeof(struct snd_mask);
+}
+
+static inline void snd_mask_none(struct snd_mask *mask)
+{
+	memset(mask, 0, sizeof(*mask));
+}
+
+static inline void snd_mask_any(struct snd_mask *mask)
+{
+	memset(mask, 0xff, SNDRV_MASK_SIZE * sizeof(u_int32_t));
+}
+
+static inline int snd_mask_empty(const struct snd_mask *mask)
+{
+	int i;
+	for (i = 0; i < SNDRV_MASK_SIZE; i++)
+		if (mask->bits[i])
+			return 0;
+	return 1;
+}
+
+static inline unsigned int snd_mask_min(const struct snd_mask *mask)
+{
+	int i;
+	for (i = 0; i < SNDRV_MASK_SIZE; i++) {
+		if (mask->bits[i])
+			return ffs(mask->bits[i]) - 1 + (i << 5);
+	}
+	return 0;
+}
+
+static inline unsigned int snd_mask_max(const struct snd_mask *mask)
+{
+	int i;
+	for (i = SNDRV_MASK_SIZE - 1; i >= 0; i--) {
+		if (mask->bits[i])
+			return ld2(mask->bits[i]) + (i << 5);
+	}
+	return 0;
+}
+
+static inline void snd_mask_set(struct snd_mask *mask, unsigned int val)
+{
+	mask->bits[MASK_OFS(val)] |= MASK_BIT(val);
+}
+
+static inline void snd_mask_reset(struct snd_mask *mask, unsigned int val)
+{
+	mask->bits[MASK_OFS(val)] &= ~MASK_BIT(val);
+}
+
+static inline void snd_mask_set_range(struct snd_mask *mask,
+				      unsigned int from, unsigned int to)
+{
+	unsigned int i;
+	for (i = from; i <= to; i++)
+		mask->bits[MASK_OFS(i)] |= MASK_BIT(i);
+}
+
+static inline void snd_mask_reset_range(struct snd_mask *mask,
+					unsigned int from, unsigned int to)
+{
+	unsigned int i;
+	for (i = from; i <= to; i++)
+		mask->bits[MASK_OFS(i)] &= ~MASK_BIT(i);
+}
+
+static inline void snd_mask_leave(struct snd_mask *mask, unsigned int val)
+{
+	unsigned int v;
+	v = mask->bits[MASK_OFS(val)] & MASK_BIT(val);
+	snd_mask_none(mask);
+	mask->bits[MASK_OFS(val)] = v;
+}
+
+static inline void snd_mask_intersect(struct snd_mask *mask,
+				      const struct snd_mask *v)
+{
+	int i;
+	for (i = 0; i < SNDRV_MASK_SIZE; i++)
+		mask->bits[i] &= v->bits[i];
+}
+
+static inline int snd_mask_eq(const struct snd_mask *mask,
+			      const struct snd_mask *v)
+{
+	return ! memcmp(mask, v, SNDRV_MASK_SIZE * sizeof(u_int32_t));
+}
+
+static inline void snd_mask_copy(struct snd_mask *mask,
+				 const struct snd_mask *v)
+{
+	*mask = *v;
+}
+
+static inline int snd_mask_test(const struct snd_mask *mask, unsigned int val)
+{
+	return mask->bits[MASK_OFS(val)] & MASK_BIT(val);
+}
+
+static inline int snd_mask_single(const struct snd_mask *mask)
+{
+	int i, c = 0;
+	for (i = 0; i < SNDRV_MASK_SIZE; i++) {
+		if (! mask->bits[i])
+			continue;
+		if (mask->bits[i] & (mask->bits[i] - 1))
+			return 0;
+		if (c)
+			return 0;
+		c++;
+	}
+	return 1;
+}
+
+static inline int snd_mask_refine(struct snd_mask *mask,
+				  const struct snd_mask *v)
+{
+	struct snd_mask old;
+	snd_mask_copy(&old, mask);
+	snd_mask_intersect(mask, v);
+	if (snd_mask_empty(mask))
+		return -EINVAL;
+	return !snd_mask_eq(mask, &old);
+}
+
+static inline int snd_mask_refine_first(struct snd_mask *mask)
+{
+	if (snd_mask_single(mask))
+		return 0;
+	snd_mask_leave(mask, snd_mask_min(mask));
+	return 1;
+}
+
+static inline int snd_mask_refine_last(struct snd_mask *mask)
+{
+	if (snd_mask_single(mask))
+		return 0;
+	snd_mask_leave(mask, snd_mask_max(mask));
+	return 1;
+}
+
+static inline int snd_mask_refine_min(struct snd_mask *mask, unsigned int val)
+{
+	if (snd_mask_min(mask) >= val)
+		return 0;
+	snd_mask_reset_range(mask, 0, val - 1);
+	if (snd_mask_empty(mask))
+		return -EINVAL;
+	return 1;
+}
+
+static inline int snd_mask_refine_max(struct snd_mask *mask, unsigned int val)
+{
+	if (snd_mask_max(mask) <= val)
+		return 0;
+	snd_mask_reset_range(mask, val + 1, SNDRV_MASK_BITS);
+	if (snd_mask_empty(mask))
+		return -EINVAL;
+	return 1;
+}
+
+static inline int snd_mask_refine_set(struct snd_mask *mask, unsigned int val)
+{
+	int changed;
+	changed = !snd_mask_single(mask);
+	snd_mask_leave(mask, val);
+	if (snd_mask_empty(mask))
+		return -EINVAL;
+	return changed;
+}
+
+static inline int snd_mask_value(const struct snd_mask *mask)
+{
+	return snd_mask_min(mask);
+}
+
+static inline void snd_interval_any(struct snd_interval *i)
+{
+	i->min = 0;
+	i->openmin = 0;
+	i->max = UINT_MAX;
+	i->openmax = 0;
+	i->integer = 0;
+	i->empty = 0;
+}
+
+static inline void snd_interval_none(struct snd_interval *i)
+{
+	i->empty = 1;
+}
+
+static inline int snd_interval_checkempty(const struct snd_interval *i)
+{
+	return (i->min > i->max ||
+		(i->min == i->max && (i->openmin || i->openmax)));
+}
+
+static inline int snd_interval_empty(const struct snd_interval *i)
+{
+	return i->empty;
+}
+
+static inline int snd_interval_single(const struct snd_interval *i)
+{
+	return (i->min == i->max || 
+		(i->min + 1 == i->max && i->openmax));
+}
+
+static inline int snd_interval_value(const struct snd_interval *i)
+{
+	return i->min;
+}
+
+static inline int snd_interval_min(const struct snd_interval *i)
+{
+	return i->min;
+}
+
+static inline int snd_interval_max(const struct snd_interval *i)
+{
+	unsigned int v;
+	v = i->max;
+	if (i->openmax)
+		v--;
+	return v;
+}
+
+static inline int snd_interval_test(const struct snd_interval *i, unsigned int val)
+{
+	return !((i->min > val || (i->min == val && i->openmin) ||
+		  i->max < val || (i->max == val && i->openmax)));
+}
+
+static inline void snd_interval_copy(struct snd_interval *d, const struct snd_interval *s)
+{
+	*d = *s;
+}
+
+static inline int snd_interval_setinteger(struct snd_interval *i)
+{
+	if (i->integer)
+		return 0;
+	if (i->openmin && i->openmax && i->min == i->max)
+		return -EINVAL;
+	i->integer = 1;
+	return 1;
+}
+
+static inline int snd_interval_eq(const struct snd_interval *i1, const struct snd_interval *i2)
+{
+	if (i1->empty)
+		return i2->empty;
+	if (i2->empty)
+		return i1->empty;
+	return i1->min == i2->min && i1->openmin == i2->openmin &&
+		i1->max == i2->max && i1->openmax == i2->openmax;
+}
+
+static inline unsigned int add(unsigned int a, unsigned int b)
+{
+	if (a >= UINT_MAX - b)
+		return UINT_MAX;
+	return a + b;
+}
+
+static inline unsigned int sub(unsigned int a, unsigned int b)
+{
+	if (a > b)
+		return a - b;
+	return 0;
+}
+
+#define params_access(p) ((__force snd_pcm_access_t)\
+		snd_mask_min(hw_param_mask_c((p), SNDRV_PCM_HW_PARAM_ACCESS)))
+#define params_format(p) ((__force snd_pcm_format_t)\
+		snd_mask_min(hw_param_mask_c((p), SNDRV_PCM_HW_PARAM_FORMAT)))
+#define params_subformat(p) \
+	snd_mask_min(hw_param_mask_c((p), SNDRV_PCM_HW_PARAM_SUBFORMAT))
+
+static inline unsigned int
+params_period_bytes(const struct snd_pcm_hw_params *p)
+{
+	return (params_period_size(p) *
+		snd_pcm_format_physical_width(params_format(p)) *
+		params_channels(p)) / 8;
+}
+
+#endif /* __SOUND_PCM_PARAMS_H */
diff --git a/include/sound/pt2258.h b/include/sound/pt2258.h
new file mode 100644
index 00000000..160f812f
--- /dev/null
+++ b/include/sound/pt2258.h
@@ -0,0 +1,37 @@
+/*
+ *   ALSA Driver for the PT2258 volume controller.
+ *
+ *	Copyright (c) 2006  Jochen Voss <voss@seehuhn.de>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */      
+
+#ifndef __SOUND_PT2258_H
+#define __SOUND_PT2258_H
+
+struct snd_pt2258 {
+	struct snd_card *card;
+	struct snd_i2c_bus *i2c_bus;
+	struct snd_i2c_device *i2c_dev;
+
+	unsigned char volume[6];
+	int mute;
+};
+
+extern int snd_pt2258_reset(struct snd_pt2258 *pt);
+extern int snd_pt2258_build_controls(struct snd_pt2258 *pt);
+
+#endif /* __SOUND_PT2258_H */
diff --git a/include/sound/pxa2xx-lib.h b/include/sound/pxa2xx-lib.h
new file mode 100644
index 00000000..2fd3d251
--- /dev/null
+++ b/include/sound/pxa2xx-lib.h
@@ -0,0 +1,45 @@
+#ifndef PXA2XX_LIB_H
+#define PXA2XX_LIB_H
+
+#include <linux/platform_device.h>
+#include <sound/ac97_codec.h>
+
+/* PCM */
+
+struct pxa2xx_pcm_dma_params {
+	char *name;			/* stream identifier */
+	u32 dcmd;			/* DMA descriptor dcmd field */
+	volatile u32 *drcmr;		/* the DMA request channel to use */
+	u32 dev_addr;			/* device physical address for DMA */
+};
+
+extern int __pxa2xx_pcm_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params);
+extern int __pxa2xx_pcm_hw_free(struct snd_pcm_substream *substream);
+extern int pxa2xx_pcm_trigger(struct snd_pcm_substream *substream, int cmd);
+extern snd_pcm_uframes_t pxa2xx_pcm_pointer(struct snd_pcm_substream *substream);
+extern int __pxa2xx_pcm_prepare(struct snd_pcm_substream *substream);
+extern void pxa2xx_pcm_dma_irq(int dma_ch, void *dev_id);
+extern int __pxa2xx_pcm_open(struct snd_pcm_substream *substream);
+extern int __pxa2xx_pcm_close(struct snd_pcm_substream *substream);
+extern int pxa2xx_pcm_mmap(struct snd_pcm_substream *substream,
+	struct vm_area_struct *vma);
+extern int pxa2xx_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream);
+extern void pxa2xx_pcm_free_dma_buffers(struct snd_pcm *pcm);
+
+/* AC97 */
+
+extern unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97, unsigned short reg);
+extern void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg, unsigned short val);
+
+extern bool pxa2xx_ac97_try_warm_reset(struct snd_ac97 *ac97);
+extern bool pxa2xx_ac97_try_cold_reset(struct snd_ac97 *ac97);
+extern void pxa2xx_ac97_finish_reset(struct snd_ac97 *ac97);
+
+extern int pxa2xx_ac97_hw_suspend(void);
+extern int pxa2xx_ac97_hw_resume(void);
+
+extern int pxa2xx_ac97_hw_probe(struct platform_device *dev);
+extern void pxa2xx_ac97_hw_remove(struct platform_device *dev);
+
+#endif
diff --git a/include/sound/rawmidi.h b/include/sound/rawmidi.h
new file mode 100644
index 00000000..6b14359d
--- /dev/null
+++ b/include/sound/rawmidi.h
@@ -0,0 +1,189 @@
+#ifndef __SOUND_RAWMIDI_H
+#define __SOUND_RAWMIDI_H
+
+/*
+ *  Abstract layer for MIDI v1.0 stream
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <sound/asound.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+
+#if defined(CONFIG_SND_SEQUENCER) || defined(CONFIG_SND_SEQUENCER_MODULE)
+#include "seq_device.h"
+#endif
+
+/*
+ *  Raw MIDI interface
+ */
+
+#define SNDRV_RAWMIDI_DEVICES		8
+
+#define SNDRV_RAWMIDI_LFLG_OUTPUT	(1<<0)
+#define SNDRV_RAWMIDI_LFLG_INPUT	(1<<1)
+#define SNDRV_RAWMIDI_LFLG_OPEN		(3<<0)
+#define SNDRV_RAWMIDI_LFLG_APPEND	(1<<2)
+
+struct snd_rawmidi;
+struct snd_rawmidi_substream;
+struct snd_seq_port_info;
+struct pid;
+
+struct snd_rawmidi_ops {
+	int (*open) (struct snd_rawmidi_substream * substream);
+	int (*close) (struct snd_rawmidi_substream * substream);
+	void (*trigger) (struct snd_rawmidi_substream * substream, int up);
+	void (*drain) (struct snd_rawmidi_substream * substream);
+};
+
+struct snd_rawmidi_global_ops {
+	int (*dev_register) (struct snd_rawmidi * rmidi);
+	int (*dev_unregister) (struct snd_rawmidi * rmidi);
+	void (*get_port_info)(struct snd_rawmidi *rmidi, int number,
+			      struct snd_seq_port_info *info);
+};
+
+struct snd_rawmidi_runtime {
+	struct snd_rawmidi_substream *substream;
+	unsigned int drain: 1,	/* drain stage */
+		     oss: 1;	/* OSS compatible mode */
+	/* midi stream buffer */
+	unsigned char *buffer;	/* buffer for MIDI data */
+	size_t buffer_size;	/* size of buffer */
+	size_t appl_ptr;	/* application pointer */
+	size_t hw_ptr;		/* hardware pointer */
+	size_t avail_min;	/* min avail for wakeup */
+	size_t avail;		/* max used buffer for wakeup */
+	size_t xruns;		/* over/underruns counter */
+	/* misc */
+	spinlock_t lock;
+	wait_queue_head_t sleep;
+	/* event handler (new bytes, input only) */
+	void (*event)(struct snd_rawmidi_substream *substream);
+	/* defers calls to event [input] or ops->trigger [output] */
+	struct work_struct event_work;
+	/* private data */
+	void *private_data;
+	void (*private_free)(struct snd_rawmidi_substream *substream);
+};
+
+struct snd_rawmidi_substream {
+	struct list_head list;		/* list of all substream for given stream */
+	int stream;			/* direction */
+	int number;			/* substream number */
+	unsigned int opened: 1,		/* open flag */
+		     append: 1,		/* append flag (merge more streams) */
+		     active_sensing: 1; /* send active sensing when close */
+	int use_count;			/* use counter (for output) */
+	size_t bytes;
+	struct snd_rawmidi *rmidi;
+	struct snd_rawmidi_str *pstr;
+	char name[32];
+	struct snd_rawmidi_runtime *runtime;
+	struct pid *pid;
+	/* hardware layer */
+	struct snd_rawmidi_ops *ops;
+};
+
+struct snd_rawmidi_file {
+	struct snd_rawmidi *rmidi;
+	struct snd_rawmidi_substream *input;
+	struct snd_rawmidi_substream *output;
+};
+
+struct snd_rawmidi_str {
+	unsigned int substream_count;
+	unsigned int substream_opened;
+	struct list_head substreams;
+};
+
+struct snd_rawmidi {
+	struct snd_card *card;
+	struct list_head list;
+	unsigned int device;		/* device number */
+	unsigned int info_flags;	/* SNDRV_RAWMIDI_INFO_XXXX */
+	char id[64];
+	char name[80];
+
+#ifdef CONFIG_SND_OSSEMUL
+	int ossreg;
+#endif
+
+	struct snd_rawmidi_global_ops *ops;
+
+	struct snd_rawmidi_str streams[2];
+
+	void *private_data;
+	void (*private_free) (struct snd_rawmidi *rmidi);
+
+	struct mutex open_mutex;
+	wait_queue_head_t open_wait;
+
+	struct snd_info_entry *dev;
+	struct snd_info_entry *proc_entry;
+
+#if defined(CONFIG_SND_SEQUENCER) || defined(CONFIG_SND_SEQUENCER_MODULE)
+	struct snd_seq_device *seq_dev;
+#endif
+};
+
+/* main rawmidi functions */
+
+int snd_rawmidi_new(struct snd_card *card, char *id, int device,
+		    int output_count, int input_count,
+		    struct snd_rawmidi **rmidi);
+void snd_rawmidi_set_ops(struct snd_rawmidi *rmidi, int stream,
+			 struct snd_rawmidi_ops *ops);
+
+/* callbacks */
+
+void snd_rawmidi_receive_reset(struct snd_rawmidi_substream *substream);
+int snd_rawmidi_receive(struct snd_rawmidi_substream *substream,
+			const unsigned char *buffer, int count);
+void snd_rawmidi_transmit_reset(struct snd_rawmidi_substream *substream);
+int snd_rawmidi_transmit_empty(struct snd_rawmidi_substream *substream);
+int snd_rawmidi_transmit_peek(struct snd_rawmidi_substream *substream,
+			      unsigned char *buffer, int count);
+int snd_rawmidi_transmit_ack(struct snd_rawmidi_substream *substream, int count);
+int snd_rawmidi_transmit(struct snd_rawmidi_substream *substream,
+			 unsigned char *buffer, int count);
+
+/* main midi functions */
+
+int snd_rawmidi_info_select(struct snd_card *card, struct snd_rawmidi_info *info);
+int snd_rawmidi_kernel_open(struct snd_card *card, int device, int subdevice,
+			    int mode, struct snd_rawmidi_file *rfile);
+int snd_rawmidi_kernel_release(struct snd_rawmidi_file *rfile);
+int snd_rawmidi_output_params(struct snd_rawmidi_substream *substream,
+			      struct snd_rawmidi_params *params);
+int snd_rawmidi_input_params(struct snd_rawmidi_substream *substream,
+			     struct snd_rawmidi_params *params);
+int snd_rawmidi_drop_output(struct snd_rawmidi_substream *substream);
+int snd_rawmidi_drain_output(struct snd_rawmidi_substream *substream);
+int snd_rawmidi_drain_input(struct snd_rawmidi_substream *substream);
+long snd_rawmidi_kernel_read(struct snd_rawmidi_substream *substream,
+			     unsigned char *buf, long count);
+long snd_rawmidi_kernel_write(struct snd_rawmidi_substream *substream,
+			      const unsigned char *buf, long count);
+
+#endif /* __SOUND_RAWMIDI_H */
diff --git a/include/sound/s3c24xx_uda134x.h b/include/sound/s3c24xx_uda134x.h
new file mode 100644
index 00000000..33df4cb9
--- /dev/null
+++ b/include/sound/s3c24xx_uda134x.h
@@ -0,0 +1,14 @@
+#ifndef _S3C24XX_UDA134X_H_
+#define _S3C24XX_UDA134X_H_ 1
+
+#include <sound/uda134x.h>
+
+struct s3c24xx_uda134x_platform_data {
+	int l3_clk;
+	int l3_mode;
+	int l3_data;
+	void (*power) (int);
+	int model;
+};
+
+#endif
diff --git a/include/sound/saif.h b/include/sound/saif.h
new file mode 100644
index 00000000..f22f3e16
--- /dev/null
+++ b/include/sound/saif.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SOUND_SAIF_H__
+#define __SOUND_SAIF_H__
+
+struct mxs_saif_platform_data {
+	bool master_mode;	/* if true use master mode */
+	int master_id;		/* id of the master if in slave mode */
+};
+#endif
diff --git a/include/sound/sb.h b/include/sound/sb.h
new file mode 100644
index 00000000..95353542
--- /dev/null
+++ b/include/sound/sb.h
@@ -0,0 +1,375 @@
+#ifndef __SOUND_SB_H
+#define __SOUND_SB_H
+
+/*
+ *  Header file for SoundBlaster cards
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include "pcm.h"
+#include "rawmidi.h"
+#include <linux/interrupt.h>
+#include <asm/io.h>
+
+enum sb_hw_type {
+	SB_HW_AUTO,
+	SB_HW_10,
+	SB_HW_20,
+	SB_HW_201,
+	SB_HW_PRO,
+	SB_HW_JAZZ16,		/* Media Vision Jazz16 */
+	SB_HW_16,
+	SB_HW_16CSP,		/* SB16 with CSP chip */
+	SB_HW_ALS100,		/* Avance Logic ALS100 chip */
+	SB_HW_ALS4000,		/* Avance Logic ALS4000 chip */
+	SB_HW_DT019X,		/* Diamond Tech. DT-019X / Avance Logic ALS-007 */
+	SB_HW_CS5530,		/* Cyrix/NatSemi 5530 VSA1 */
+};
+
+#define SB_OPEN_PCM			0x01
+#define SB_OPEN_MIDI_INPUT		0x02
+#define SB_OPEN_MIDI_OUTPUT		0x04
+#define SB_OPEN_MIDI_INPUT_TRIGGER	0x08
+#define SB_OPEN_MIDI_OUTPUT_TRIGGER	0x10
+
+#define SB_MODE_HALT		0x00
+#define SB_MODE_PLAYBACK_8	0x01
+#define SB_MODE_PLAYBACK_16	0x02
+#define SB_MODE_PLAYBACK	(SB_MODE_PLAYBACK_8 | SB_MODE_PLAYBACK_16)
+#define SB_MODE_CAPTURE_8	0x04
+#define SB_MODE_CAPTURE_16	0x08
+#define SB_MODE_CAPTURE		(SB_MODE_CAPTURE_8 | SB_MODE_CAPTURE_16)
+
+#define SB_RATE_LOCK_PLAYBACK	0x10
+#define SB_RATE_LOCK_CAPTURE	0x20
+#define SB_RATE_LOCK		(SB_RATE_LOCK_PLAYBACK | SB_RATE_LOCK_CAPTURE)
+
+#define SB_MPU_INPUT		1
+
+struct snd_sb {
+	unsigned long port;		/* base port of DSP chip */
+	struct resource *res_port;
+	unsigned long mpu_port;		/* MPU port for SB DSP 4.0+ */
+	int irq;			/* IRQ number of DSP chip */
+	int dma8;			/* 8-bit DMA */
+	int dma16;			/* 16-bit DMA */
+	unsigned short version;		/* version of DSP chip */
+	enum sb_hw_type hardware;	/* see to SB_HW_XXXX */
+
+	unsigned long alt_port;		/* alternate port (ALS4000) */
+	struct pci_dev *pci;		/* ALS4000 */
+
+	unsigned int open;		/* see to SB_OPEN_XXXX for sb8 */
+					/* also SNDRV_SB_CSP_MODE_XXX for sb16_csp */
+	unsigned int mode;		/* current mode of stream */
+	unsigned int force_mode16;	/* force 16-bit mode of streams */
+	unsigned int locked_rate;	/* sb16 duplex */
+	unsigned int playback_format;
+	unsigned int capture_format;
+	struct timer_list midi_timer;
+	unsigned int p_dma_size;
+	unsigned int p_period_size;
+	unsigned int c_dma_size;
+	unsigned int c_period_size;
+
+	spinlock_t mixer_lock;
+
+	char name[32];
+
+	void *csp; /* used only when CONFIG_SND_SB16_CSP is set */
+
+	struct snd_card *card;
+	struct snd_pcm *pcm;
+	struct snd_pcm_substream *playback_substream;
+	struct snd_pcm_substream *capture_substream;
+
+	struct snd_rawmidi *rmidi;
+	struct snd_rawmidi_substream *midi_substream_input;
+	struct snd_rawmidi_substream *midi_substream_output;
+	irq_handler_t rmidi_callback;
+
+	spinlock_t reg_lock;
+	spinlock_t open_lock;
+	spinlock_t midi_input_lock;
+
+	struct snd_info_entry *proc_entry;
+
+#ifdef CONFIG_PM
+	unsigned char saved_regs[0x20];
+#endif
+};
+
+/* I/O ports */
+
+#define SBP(chip, x)		((chip)->port + s_b_SB_##x)
+#define SBP1(port, x)		((port) + s_b_SB_##x)
+
+#define s_b_SB_RESET		0x6
+#define s_b_SB_READ		0xa
+#define s_b_SB_WRITE		0xc
+#define s_b_SB_COMMAND		0xc
+#define s_b_SB_STATUS		0xc
+#define s_b_SB_DATA_AVAIL	0xe
+#define s_b_SB_DATA_AVAIL_16 	0xf
+#define s_b_SB_MIXER_ADDR	0x4
+#define s_b_SB_MIXER_DATA	0x5
+#define s_b_SB_OPL3_LEFT	0x0
+#define s_b_SB_OPL3_RIGHT	0x2
+#define s_b_SB_OPL3_BOTH	0x8
+
+#define SB_DSP_OUTPUT		0x14
+#define SB_DSP_INPUT		0x24
+#define SB_DSP_BLOCK_SIZE	0x48
+#define SB_DSP_HI_OUTPUT	0x91
+#define SB_DSP_HI_INPUT		0x99
+#define SB_DSP_LO_OUTPUT_AUTO	0x1c
+#define SB_DSP_LO_INPUT_AUTO	0x2c
+#define SB_DSP_HI_OUTPUT_AUTO	0x90
+#define SB_DSP_HI_INPUT_AUTO	0x98
+#define SB_DSP_IMMED_INT	0xf2
+#define SB_DSP_GET_VERSION	0xe1
+#define SB_DSP_SPEAKER_ON	0xd1
+#define SB_DSP_SPEAKER_OFF	0xd3
+#define SB_DSP_DMA8_OFF		0xd0
+#define SB_DSP_DMA8_ON		0xd4
+#define SB_DSP_DMA8_EXIT	0xda
+#define SB_DSP_DMA16_OFF	0xd5
+#define SB_DSP_DMA16_ON		0xd6
+#define SB_DSP_DMA16_EXIT	0xd9
+#define SB_DSP_SAMPLE_RATE	0x40
+#define SB_DSP_SAMPLE_RATE_OUT	0x41
+#define SB_DSP_SAMPLE_RATE_IN	0x42
+#define SB_DSP_MONO_8BIT	0xa0
+#define SB_DSP_MONO_16BIT	0xa4
+#define SB_DSP_STEREO_8BIT	0xa8
+#define SB_DSP_STEREO_16BIT	0xac
+
+#define SB_DSP_MIDI_INPUT_IRQ	0x31
+#define SB_DSP_MIDI_UART_IRQ	0x35
+#define SB_DSP_MIDI_OUTPUT	0x38
+
+#define SB_DSP4_OUT8_AI		0xc6
+#define SB_DSP4_IN8_AI		0xce
+#define SB_DSP4_OUT16_AI	0xb6
+#define SB_DSP4_IN16_AI		0xbe
+#define SB_DSP4_MODE_UNS_MONO	0x00
+#define SB_DSP4_MODE_SIGN_MONO	0x10
+#define SB_DSP4_MODE_UNS_STEREO	0x20
+#define SB_DSP4_MODE_SIGN_STEREO 0x30
+
+#define SB_DSP4_OUTPUT		0x3c
+#define SB_DSP4_INPUT_LEFT	0x3d
+#define SB_DSP4_INPUT_RIGHT	0x3e
+
+/* registers for SB 2.0 mixer */
+#define SB_DSP20_MASTER_DEV	0x02
+#define SB_DSP20_PCM_DEV	0x0A
+#define SB_DSP20_CD_DEV		0x08
+#define SB_DSP20_FM_DEV		0x06
+
+/* registers for SB PRO mixer */
+#define SB_DSP_MASTER_DEV	0x22
+#define SB_DSP_PCM_DEV		0x04
+#define SB_DSP_LINE_DEV		0x2e
+#define SB_DSP_CD_DEV		0x28
+#define SB_DSP_FM_DEV		0x26
+#define SB_DSP_MIC_DEV		0x0a
+#define SB_DSP_CAPTURE_SOURCE	0x0c
+#define SB_DSP_CAPTURE_FILT	0x0c
+#define SB_DSP_PLAYBACK_FILT	0x0e
+#define SB_DSP_STEREO_SW	0x0e
+
+#define SB_DSP_MIXS_MIC0	0x00	/* same as MIC */
+#define SB_DSP_MIXS_CD		0x01
+#define SB_DSP_MIXS_MIC		0x02
+#define SB_DSP_MIXS_LINE	0x03
+
+/* registers (only for left channel) for SB 16 mixer */
+#define SB_DSP4_MASTER_DEV	0x30
+#define SB_DSP4_BASS_DEV	0x46
+#define SB_DSP4_TREBLE_DEV	0x44
+#define SB_DSP4_SYNTH_DEV	0x34
+#define SB_DSP4_PCM_DEV		0x32
+#define SB_DSP4_SPEAKER_DEV	0x3b
+#define SB_DSP4_LINE_DEV	0x38
+#define SB_DSP4_MIC_DEV		0x3a
+#define SB_DSP4_OUTPUT_SW	0x3c
+#define SB_DSP4_CD_DEV		0x36
+#define SB_DSP4_IGAIN_DEV	0x3f
+#define SB_DSP4_OGAIN_DEV	0x41
+#define SB_DSP4_MIC_AGC		0x43
+
+/* additional registers for SB 16 mixer */
+#define SB_DSP4_IRQSETUP	0x80
+#define SB_DSP4_DMASETUP	0x81
+#define SB_DSP4_IRQSTATUS	0x82
+#define SB_DSP4_MPUSETUP	0x84
+
+#define SB_DSP4_3DSE		0x90
+
+/* Registers for DT-019x / ALS-007 mixer */
+#define SB_DT019X_MASTER_DEV	0x62
+#define SB_DT019X_PCM_DEV	0x64
+#define SB_DT019X_SYNTH_DEV	0x66
+#define SB_DT019X_CD_DEV	0x68
+#define SB_DT019X_MIC_DEV	0x6a
+#define SB_DT019X_SPKR_DEV	0x6a
+#define SB_DT019X_LINE_DEV	0x6e
+#define SB_DT019X_OUTPUT_SW2	0x4c
+#define SB_DT019X_CAPTURE_SW	0x6c
+
+#define SB_DT019X_CAP_CD	0x02
+#define SB_DT019X_CAP_MIC	0x04
+#define SB_DT019X_CAP_LINE	0x06
+#define SB_DT019X_CAP_SYNTH	0x07
+#define SB_DT019X_CAP_MAIN	0x07
+
+#define SB_ALS4000_MONO_IO_CTRL	0x4b
+#define SB_ALS4000_OUT_MIXER_CTRL_2	0x4c
+#define SB_ALS4000_MIC_IN_GAIN	0x4d
+#define SB_ALS4000_ANALOG_REFRNC_VOLT_CTRL 0x4e
+#define SB_ALS4000_FMDAC	0x4f
+#define SB_ALS4000_3D_SND_FX	0x50
+#define SB_ALS4000_3D_TIME_DELAY	0x51
+#define SB_ALS4000_3D_AUTO_MUTE	0x52
+#define SB_ALS4000_ANALOG_BLOCK_CTRL 0x53
+#define SB_ALS4000_3D_DELAYLINE_PATTERN 0x54
+#define SB_ALS4000_CR3_CONFIGURATION	0xc3 /* bit 7 is Digital Loop Enable */
+#define SB_ALS4000_QSOUND	0xdb
+
+/* IRQ setting bitmap */
+#define SB_IRQSETUP_IRQ9	0x01
+#define SB_IRQSETUP_IRQ5	0x02
+#define SB_IRQSETUP_IRQ7	0x04
+#define SB_IRQSETUP_IRQ10	0x08
+
+/* IRQ types */
+#define SB_IRQTYPE_8BIT		0x01
+#define SB_IRQTYPE_16BIT	0x02
+#define SB_IRQTYPE_MPUIN	0x04
+#define ALS4K_IRQTYPE_CR1E_DMA	0x20
+
+/* DMA setting bitmap */
+#define SB_DMASETUP_DMA0	0x01
+#define SB_DMASETUP_DMA1	0x02
+#define SB_DMASETUP_DMA3	0x08
+#define SB_DMASETUP_DMA5	0x20
+#define SB_DMASETUP_DMA6	0x40
+#define SB_DMASETUP_DMA7	0x80
+
+/*
+ *
+ */
+
+static inline void snd_sb_ack_8bit(struct snd_sb *chip)
+{
+	inb(SBP(chip, DATA_AVAIL));
+}
+
+static inline void snd_sb_ack_16bit(struct snd_sb *chip)
+{
+	inb(SBP(chip, DATA_AVAIL_16));
+}
+
+/* sb_common.c */
+int snd_sbdsp_command(struct snd_sb *chip, unsigned char val);
+int snd_sbdsp_get_byte(struct snd_sb *chip);
+int snd_sbdsp_reset(struct snd_sb *chip);
+int snd_sbdsp_create(struct snd_card *card,
+		     unsigned long port,
+		     int irq,
+		     irq_handler_t irq_handler,
+		     int dma8, int dma16,
+		     unsigned short hardware,
+		     struct snd_sb **r_chip);
+/* sb_mixer.c */
+void snd_sbmixer_write(struct snd_sb *chip, unsigned char reg, unsigned char data);
+unsigned char snd_sbmixer_read(struct snd_sb *chip, unsigned char reg);
+int snd_sbmixer_new(struct snd_sb *chip);
+#ifdef CONFIG_PM
+void snd_sbmixer_suspend(struct snd_sb *chip);
+void snd_sbmixer_resume(struct snd_sb *chip);
+#endif
+
+/* sb8_init.c */
+int snd_sb8dsp_pcm(struct snd_sb *chip, int device, struct snd_pcm ** rpcm);
+/* sb8.c */
+irqreturn_t snd_sb8dsp_interrupt(struct snd_sb *chip);
+int snd_sb8_playback_open(struct snd_pcm_substream *substream);
+int snd_sb8_capture_open(struct snd_pcm_substream *substream);
+int snd_sb8_playback_close(struct snd_pcm_substream *substream);
+int snd_sb8_capture_close(struct snd_pcm_substream *substream);
+/* midi8.c */
+irqreturn_t snd_sb8dsp_midi_interrupt(struct snd_sb *chip);
+int snd_sb8dsp_midi(struct snd_sb *chip, int device, struct snd_rawmidi ** rrawmidi);
+
+/* sb16_init.c */
+int snd_sb16dsp_pcm(struct snd_sb *chip, int device, struct snd_pcm ** rpcm);
+const struct snd_pcm_ops *snd_sb16dsp_get_pcm_ops(int direction);
+int snd_sb16dsp_configure(struct snd_sb *chip);
+/* sb16.c */
+irqreturn_t snd_sb16dsp_interrupt(int irq, void *dev_id);
+
+/* exported mixer stuffs */
+enum {
+	SB_MIX_SINGLE,
+	SB_MIX_DOUBLE,
+	SB_MIX_INPUT_SW,
+	SB_MIX_CAPTURE_PRO,
+	SB_MIX_CAPTURE_DT019X,
+	SB_MIX_MONO_CAPTURE_ALS4K
+};
+
+#define SB_MIXVAL_DOUBLE(left_reg, right_reg, left_shift, right_shift, mask) \
+  ((left_reg) | ((right_reg) << 8) | ((left_shift) << 16) | ((right_shift) << 19) | ((mask) << 24))
+#define SB_MIXVAL_SINGLE(reg, shift, mask) \
+  ((reg) | ((shift) << 16) | ((mask) << 24))
+#define SB_MIXVAL_INPUT_SW(reg1, reg2, left_shift, right_shift) \
+  ((reg1) | ((reg2) << 8) | ((left_shift) << 16) | ((right_shift) << 24))
+
+int snd_sbmixer_add_ctl(struct snd_sb *chip, const char *name, int index, int type, unsigned long value);
+
+/* for ease of use */
+struct sbmix_elem {
+	const char *name;
+	int type;
+	unsigned long private_value;
+};
+
+#define SB_SINGLE(xname, reg, shift, mask) \
+{ .name = xname, \
+  .type = SB_MIX_SINGLE, \
+  .private_value = SB_MIXVAL_SINGLE(reg, shift, mask) }
+
+#define SB_DOUBLE(xname, left_reg, right_reg, left_shift, right_shift, mask) \
+{ .name = xname, \
+  .type = SB_MIX_DOUBLE, \
+  .private_value = SB_MIXVAL_DOUBLE(left_reg, right_reg, left_shift, right_shift, mask) }
+
+#define SB16_INPUT_SW(xname, reg1, reg2, left_shift, right_shift) \
+{ .name = xname, \
+  .type = SB_MIX_INPUT_SW, \
+  .private_value = SB_MIXVAL_INPUT_SW(reg1, reg2, left_shift, right_shift) }
+
+static inline int snd_sbmixer_add_ctl_elem(struct snd_sb *chip, const struct sbmix_elem *c)
+{
+	return snd_sbmixer_add_ctl(chip, c->name, 0, c->type, c->private_value);
+}
+
+#endif /* __SOUND_SB_H */
diff --git a/include/sound/sb16_csp.h b/include/sound/sb16_csp.h
new file mode 100644
index 00000000..af1b49e9
--- /dev/null
+++ b/include/sound/sb16_csp.h
@@ -0,0 +1,188 @@
+#ifndef __SOUND_SB16_CSP_H
+#define __SOUND_SB16_CSP_H
+
+/*
+ *  Copyright (c) 1999 by Uros Bizjak <uros@kss-loka.si>
+ *                        Takashi Iwai <tiwai@suse.de>
+ *
+ *  SB16ASP/AWE32 CSP control
+ *
+ *   This program is free software; you can redistribute it and/or modify 
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+/* CSP modes */
+#define SNDRV_SB_CSP_MODE_NONE		0x00
+#define SNDRV_SB_CSP_MODE_DSP_READ	0x01	/* Record from DSP */
+#define SNDRV_SB_CSP_MODE_DSP_WRITE	0x02	/* Play to DSP */
+#define SNDRV_SB_CSP_MODE_QSOUND		0x04	/* QSound */
+
+/* CSP load flags */
+#define SNDRV_SB_CSP_LOAD_FROMUSER	0x01
+#define SNDRV_SB_CSP_LOAD_INITBLOCK	0x02
+
+/* CSP sample width */
+#define SNDRV_SB_CSP_SAMPLE_8BIT		0x01
+#define SNDRV_SB_CSP_SAMPLE_16BIT		0x02
+
+/* CSP channels */
+#define SNDRV_SB_CSP_MONO			0x01
+#define SNDRV_SB_CSP_STEREO		0x02
+
+/* CSP rates */
+#define SNDRV_SB_CSP_RATE_8000		0x01
+#define SNDRV_SB_CSP_RATE_11025		0x02
+#define SNDRV_SB_CSP_RATE_22050		0x04
+#define SNDRV_SB_CSP_RATE_44100		0x08
+#define SNDRV_SB_CSP_RATE_ALL		0x0f
+
+/* CSP running state */
+#define SNDRV_SB_CSP_ST_IDLE		0x00
+#define SNDRV_SB_CSP_ST_LOADED		0x01
+#define SNDRV_SB_CSP_ST_RUNNING		0x02
+#define SNDRV_SB_CSP_ST_PAUSED		0x04
+#define SNDRV_SB_CSP_ST_AUTO		0x08
+#define SNDRV_SB_CSP_ST_QSOUND		0x10
+
+/* maximum QSound value (180 degrees right) */
+#define SNDRV_SB_CSP_QSOUND_MAX_RIGHT	0x20
+
+/* maximum microcode RIFF file size */
+#define SNDRV_SB_CSP_MAX_MICROCODE_FILE_SIZE	0x3000
+
+/* microcode header */
+struct snd_sb_csp_mc_header {
+	char codec_name[16];		/* id name of codec */
+	unsigned short func_req;	/* requested function */
+};
+
+/* microcode to be loaded */
+struct snd_sb_csp_microcode {
+	struct snd_sb_csp_mc_header info;
+	unsigned char data[SNDRV_SB_CSP_MAX_MICROCODE_FILE_SIZE];
+};
+
+/* start CSP with sample_width in mono/stereo */
+struct snd_sb_csp_start {
+	int sample_width;	/* sample width, look above */
+	int channels;		/* channels, look above */
+};
+
+/* CSP information */
+struct snd_sb_csp_info {
+	char codec_name[16];		/* id name of codec */
+	unsigned short func_nr;		/* function number */
+	unsigned int acc_format;	/* accepted PCM formats */
+	unsigned short acc_channels;	/* accepted channels */
+	unsigned short acc_width;	/* accepted sample width */
+	unsigned short acc_rates;	/* accepted sample rates */
+	unsigned short csp_mode;	/* CSP mode, see above */
+	unsigned short run_channels;	/* current channels  */
+	unsigned short run_width;	/* current sample width */
+	unsigned short version;		/* version id: 0x10 - 0x1f */
+	unsigned short state;		/* state bits */
+};
+
+/* HWDEP controls */
+/* get CSP information */
+#define SNDRV_SB_CSP_IOCTL_INFO		_IOR('H', 0x10, struct snd_sb_csp_info)
+/* load microcode to CSP */
+/* NOTE: struct snd_sb_csp_microcode overflows the max size (13 bits)
+ * defined for some architectures like MIPS, and it leads to build errors.
+ * (x86 and co have 14-bit size, thus it's valid, though.)
+ * As a workaround for skipping the size-limit check, here we don't use the
+ * normal _IOW() macro but _IOC() with the manual argument.
+ */
+#define SNDRV_SB_CSP_IOCTL_LOAD_CODE	\
+	_IOC(_IOC_WRITE, 'H', 0x11, sizeof(struct snd_sb_csp_microcode))
+/* unload microcode from CSP */
+#define SNDRV_SB_CSP_IOCTL_UNLOAD_CODE	_IO('H', 0x12)
+/* start CSP */
+#define SNDRV_SB_CSP_IOCTL_START		_IOW('H', 0x13, struct snd_sb_csp_start)
+/* stop CSP */
+#define SNDRV_SB_CSP_IOCTL_STOP		_IO('H', 0x14)
+/* pause CSP and DMA transfer */
+#define SNDRV_SB_CSP_IOCTL_PAUSE		_IO('H', 0x15)
+/* restart CSP and DMA transfer */
+#define SNDRV_SB_CSP_IOCTL_RESTART	_IO('H', 0x16)
+
+#ifdef __KERNEL__
+#include "sb.h"
+#include "hwdep.h"
+#include <linux/firmware.h>
+
+struct snd_sb_csp;
+
+/* indices for the known CSP programs */
+enum {
+	CSP_PROGRAM_MULAW,
+	CSP_PROGRAM_ALAW,
+	CSP_PROGRAM_ADPCM_INIT,
+	CSP_PROGRAM_ADPCM_PLAYBACK,
+	CSP_PROGRAM_ADPCM_CAPTURE,
+
+	CSP_PROGRAM_COUNT
+};
+
+/*
+ * CSP operators
+ */
+struct snd_sb_csp_ops {
+	int (*csp_use) (struct snd_sb_csp * p);
+	int (*csp_unuse) (struct snd_sb_csp * p);
+	int (*csp_autoload) (struct snd_sb_csp * p, int pcm_sfmt, int play_rec_mode);
+	int (*csp_start) (struct snd_sb_csp * p, int sample_width, int channels);
+	int (*csp_stop) (struct snd_sb_csp * p);
+	int (*csp_qsound_transfer) (struct snd_sb_csp * p);
+};
+
+/*
+ * CSP private data
+ */
+struct snd_sb_csp {
+	struct snd_sb *chip;		/* SB16 DSP */
+	int used;		/* usage flag - exclusive */
+	char codec_name[16];	/* name of codec */
+	unsigned short func_nr;	/* function number */
+	unsigned int acc_format;	/* accepted PCM formats */
+	int acc_channels;	/* accepted channels */
+	int acc_width;		/* accepted sample width */
+	int acc_rates;		/* accepted sample rates */
+	int mode;		/* MODE */
+	int run_channels;	/* current CSP channels */
+	int run_width;		/* current sample width */
+	int version;		/* CSP version (0x10 - 0x1f) */
+	int running;		/* running state */
+
+	struct snd_sb_csp_ops ops;	/* operators */
+
+	spinlock_t q_lock;	/* locking */
+	int q_enabled;		/* enabled flag */
+	int qpos_left;		/* left position */
+	int qpos_right;		/* right position */
+	int qpos_changed;	/* position changed flag */
+
+	struct snd_kcontrol *qsound_switch;
+	struct snd_kcontrol *qsound_space;
+
+	struct mutex access_mutex;	/* locking */
+
+	const struct firmware *csp_programs[CSP_PROGRAM_COUNT];
+};
+
+int snd_sb_csp_new(struct snd_sb *chip, int device, struct snd_hwdep ** rhwdep);
+#endif
+
+#endif /* __SOUND_SB16_CSP */
diff --git a/include/sound/seq_device.h b/include/sound/seq_device.h
new file mode 100644
index 00000000..2b5f24cc
--- /dev/null
+++ b/include/sound/seq_device.h
@@ -0,0 +1,84 @@
+#ifndef __SOUND_SEQ_DEVICE_H
+#define __SOUND_SEQ_DEVICE_H
+
+/*
+ *  ALSA sequencer device management
+ *  Copyright (c) 1999 by Takashi Iwai <tiwai@suse.de>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+/*
+ * registered device information
+ */
+
+#define ID_LEN	32
+
+/* status flag */
+#define SNDRV_SEQ_DEVICE_FREE		0
+#define SNDRV_SEQ_DEVICE_REGISTERED	1
+
+struct snd_seq_device {
+	/* device info */
+	struct snd_card *card;	/* sound card */
+	int device;		/* device number */
+	char id[ID_LEN];	/* driver id */
+	char name[80];		/* device name */
+	int argsize;		/* size of the argument */
+	void *driver_data;	/* private data for driver */
+	int status;		/* flag - read only */
+	void *private_data;	/* private data for the caller */
+	void (*private_free)(struct snd_seq_device *device);
+	struct list_head list;	/* link to next device */
+};
+
+
+/* driver operators
+ * init_device:
+ *	Initialize the device with given parameters.
+ *	Typically,
+ *		1. call snd_hwdep_new
+ *		2. allocate private data and initialize it
+ *		3. call snd_hwdep_register
+ *		4. store the instance to dev->driver_data pointer.
+ *		
+ * free_device:
+ *	Release the private data.
+ *	Typically, call snd_device_free(dev->card, dev->driver_data)
+ */
+struct snd_seq_dev_ops {
+	int (*init_device)(struct snd_seq_device *dev);
+	int (*free_device)(struct snd_seq_device *dev);
+};
+
+/*
+ * prototypes
+ */
+void snd_seq_device_load_drivers(void);
+int snd_seq_device_new(struct snd_card *card, int device, char *id, int argsize, struct snd_seq_device **result);
+int snd_seq_device_register_driver(char *id, struct snd_seq_dev_ops *entry, int argsize);
+int snd_seq_device_unregister_driver(char *id);
+
+#define SNDRV_SEQ_DEVICE_ARGPTR(dev) (void *)((char *)(dev) + sizeof(struct snd_seq_device))
+
+
+/*
+ * id strings for generic devices
+ */
+#define SNDRV_SEQ_DEV_ID_MIDISYNTH	"seq-midi"
+#define SNDRV_SEQ_DEV_ID_OPL3		"opl3-synth"
+
+#endif /* __SOUND_SEQ_DEVICE_H */
diff --git a/include/sound/seq_kernel.h b/include/sound/seq_kernel.h
new file mode 100644
index 00000000..f352a98c
--- /dev/null
+++ b/include/sound/seq_kernel.h
@@ -0,0 +1,116 @@
+#ifndef __SOUND_SEQ_KERNEL_H
+#define __SOUND_SEQ_KERNEL_H
+
+/*
+ *  Main kernel header file for the ALSA sequencer
+ *  Copyright (c) 1998 by Frank van de Pol <fvdpol@coil.demon.nl>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+#include <linux/time.h>
+#include "asequencer.h"
+
+typedef struct snd_seq_real_time snd_seq_real_time_t;
+typedef union snd_seq_timestamp snd_seq_timestamp_t;
+
+/* maximum number of events dequeued per schedule interval */
+#define SNDRV_SEQ_MAX_DEQUEUE		50
+
+/* maximum number of queues */
+#define SNDRV_SEQ_MAX_QUEUES		8
+
+/* max number of concurrent clients */
+#define SNDRV_SEQ_MAX_CLIENTS 		192
+
+/* max number of concurrent ports */
+#define SNDRV_SEQ_MAX_PORTS 		254
+
+/* max number of events in memory pool */
+#define SNDRV_SEQ_MAX_EVENTS		2000
+
+/* default number of events in memory chunk */
+#define SNDRV_SEQ_DEFAULT_CHUNK_EVENTS	64
+
+/* default number of events in memory pool */
+#define SNDRV_SEQ_DEFAULT_EVENTS	500
+
+/* max number of events in memory pool for one client (outqueue) */
+#define SNDRV_SEQ_MAX_CLIENT_EVENTS	2000
+
+/* default number of events in memory pool for one client (outqueue) */
+#define SNDRV_SEQ_DEFAULT_CLIENT_EVENTS	200
+
+/* max delivery path length */
+#define SNDRV_SEQ_MAX_HOPS		10
+
+/* max size of event size */
+#define SNDRV_SEQ_MAX_EVENT_LEN		0x3fffffff
+
+/* call-backs for kernel port */
+struct snd_seq_port_callback {
+	struct module *owner;
+	void *private_data;
+	int (*subscribe)(void *private_data, struct snd_seq_port_subscribe *info);
+	int (*unsubscribe)(void *private_data, struct snd_seq_port_subscribe *info);
+	int (*use)(void *private_data, struct snd_seq_port_subscribe *info);
+	int (*unuse)(void *private_data, struct snd_seq_port_subscribe *info);
+	int (*event_input)(struct snd_seq_event *ev, int direct, void *private_data, int atomic, int hop);
+	void (*private_free)(void *private_data);
+	unsigned int callback_all;	/* call subscribe callbacks at each connection/disconnection */
+	/*...*/
+};
+
+/* interface for kernel client */
+__printf(3, 4)
+int snd_seq_create_kernel_client(struct snd_card *card, int client_index,
+				 const char *name_fmt, ...);
+int snd_seq_delete_kernel_client(int client);
+int snd_seq_kernel_client_enqueue(int client, struct snd_seq_event *ev, int atomic, int hop);
+int snd_seq_kernel_client_dispatch(int client, struct snd_seq_event *ev, int atomic, int hop);
+int snd_seq_kernel_client_ctl(int client, unsigned int cmd, void *arg);
+
+#define SNDRV_SEQ_EXT_MASK	0xc0000000
+#define SNDRV_SEQ_EXT_USRPTR	0x80000000
+#define SNDRV_SEQ_EXT_CHAINED	0x40000000
+
+typedef int (*snd_seq_dump_func_t)(void *ptr, void *buf, int count);
+int snd_seq_expand_var_event(const struct snd_seq_event *event, int count, char *buf,
+			     int in_kernel, int size_aligned);
+int snd_seq_dump_var_event(const struct snd_seq_event *event,
+			   snd_seq_dump_func_t func, void *private_data);
+
+/* interface for OSS emulation */
+int snd_seq_set_queue_tempo(int client, struct snd_seq_queue_tempo *tempo);
+
+/* port callback routines */
+void snd_port_init_callback(struct snd_seq_port_callback *p);
+struct snd_seq_port_callback *snd_port_alloc_callback(void);
+
+/* port attach/detach */
+int snd_seq_event_port_attach(int client, struct snd_seq_port_callback *pcbp,
+			      int cap, int type, int midi_channels, int midi_voices, char *portname);
+int snd_seq_event_port_detach(int client, int port);
+
+#ifdef CONFIG_MODULES
+void snd_seq_autoload_lock(void);
+void snd_seq_autoload_unlock(void);
+#else
+#define snd_seq_autoload_lock()
+#define snd_seq_autoload_unlock()
+#endif
+
+#endif /* __SOUND_SEQ_KERNEL_H */
diff --git a/include/sound/seq_midi_emul.h b/include/sound/seq_midi_emul.h
new file mode 100644
index 00000000..d6c46159
--- /dev/null
+++ b/include/sound/seq_midi_emul.h
@@ -0,0 +1,197 @@
+#ifndef __SOUND_SEQ_MIDI_EMUL_H
+#define __SOUND_SEQ_MIDI_EMUL_H
+
+/*
+ *  Midi channel definition for optional channel management.
+ *
+ *  Copyright (C) 1999 Steve Ratcliffe
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include "seq_kernel.h"
+
+/*
+ * This structure is used to keep track of the current state on each
+ * channel.  All drivers for hardware that does not understand midi
+ * directly will probably need to use this structure.
+ */
+struct snd_midi_channel {
+	void *private;		/* A back pointer to driver data */
+	int  number;		/* The channel number */
+	int  client;		/* The client associated with this channel */
+	int  port;		/* The port associated with this channel */
+
+	unsigned char midi_mode;	/* GM, GS, XG etc */
+	unsigned int 
+		drum_channel:1,		/* Drum channel */
+		param_type:1		/* RPN/NRPN */
+		;
+
+	unsigned char midi_aftertouch;	/* Aftertouch (key pressure) */
+	unsigned char midi_pressure;	/* Channel pressure */
+	unsigned char midi_program;	/* Instrument number */
+	short midi_pitchbend;		/* Pitch bend amount */
+
+	unsigned char control[128];	/* Current value of all controls */
+	unsigned char note[128];	/* Current status for all notes */
+
+	short gm_rpn_pitch_bend_range;	/* Pitch bend range */
+	short gm_rpn_fine_tuning; 	/* Master fine tuning */
+	short gm_rpn_coarse_tuning;	/* Master coarse tuning */
+
+};
+
+/*
+ * A structure that represets a set of channels bound to a port.  There
+ * would usually be 16 channels per port.  But fewer could be used for
+ * particular cases.
+ * The channel set consists of information describing the client and
+ * port for this midi synth and an array of snd_midi_channel structures.
+ * A driver that had no need for snd_midi_channel could still use the
+ * channel set type if it wished with the channel array null.
+ */
+struct snd_midi_channel_set {
+	void *private_data;		/* Driver data */
+	int  client;			/* Client for this port */
+	int  port;			/* The port number */
+
+	int  max_channels;		/* Size of the channels array */
+	struct snd_midi_channel *channels;
+
+	unsigned char midi_mode;	/* MIDI operating mode */
+	unsigned char gs_master_volume;	/* SYSEX master volume: 0-127 */
+	unsigned char gs_chorus_mode;
+	unsigned char gs_reverb_mode;
+
+};
+
+struct snd_midi_op {
+	void (*note_on)(void *private_data, int note, int vel, struct snd_midi_channel *chan);
+	void (*note_off)(void *private_data,int note, int vel, struct snd_midi_channel *chan); /* release note */
+	void (*key_press)(void *private_data, int note, int vel, struct snd_midi_channel *chan);
+	void (*note_terminate)(void *private_data, int note, struct snd_midi_channel *chan); /* terminate note immediately */
+	void (*control)(void *private_data, int type, struct snd_midi_channel *chan);
+	void (*nrpn)(void *private_data, struct snd_midi_channel *chan,
+		     struct snd_midi_channel_set *chset);
+	void (*sysex)(void *private_data, unsigned char *buf, int len, int parsed,
+		      struct snd_midi_channel_set *chset);
+};
+
+/*
+ * These defines are used so that pitchbend, aftertouch etc, can be
+ * distinguished from controller values.
+ */
+/* 0-127 controller values */
+#define MIDI_CTL_PITCHBEND	0x80
+#define MIDI_CTL_AFTERTOUCH	0x81
+#define MIDI_CTL_CHAN_PRESSURE	0x82
+
+/*
+ * These names exist to allow symbolic access to the controls array.
+ * The usage is eg: chan->gm_bank_select.  Another implementation would
+ * be really have these members in the struct, and not the array.
+ */
+#define gm_bank_select		control[0]
+#define gm_modulation		control[1]
+#define gm_breath		control[2]
+#define gm_foot_pedal		control[4]
+#define gm_portamento_time	control[5]
+#define gm_data_entry		control[6]
+#define gm_volume		control[7]
+#define gm_balance		control[8]
+#define gm_pan			control[10]
+#define gm_expression		control[11]
+#define gm_effect_control1	control[12]
+#define gm_effect_control2	control[13]
+#define gm_slider1		control[16]
+#define gm_slider2		control[17]
+#define gm_slider3		control[18]
+#define gm_slider4		control[19]
+
+#define gm_bank_select_lsb	control[32]
+#define gm_modulation_wheel_lsb	control[33]
+#define gm_breath_lsb		control[34]
+#define gm_foot_pedal_lsb	control[36]
+#define gm_portamento_time_lsb	control[37]
+#define gm_data_entry_lsb	control[38]
+#define gm_volume_lsb		control[39]
+#define gm_balance_lsb		control[40]
+#define gm_pan_lsb		control[42]
+#define gm_expression_lsb	control[43]
+#define gm_effect_control1_lsb	control[44]
+#define gm_effect_control2_lsb	control[45]
+
+#define gm_sustain	 	control[MIDI_CTL_SUSTAIN]
+#define gm_hold			gm_sustain
+#define gm_portamento		control[MIDI_CTL_PORTAMENTO]
+#define gm_sostenuto		control[MIDI_CTL_SOSTENUTO]
+
+/*
+ * These macros give the complete value of the controls that consist
+ * of coarse and fine pairs.  Of course the fine controls are seldom used
+ * but there is no harm in being complete.
+ */
+#define SNDRV_GM_BANK_SELECT(cp)		(((cp)->control[0]<<7)|((cp)->control[32]))
+#define SNDRV_GM_MODULATION_WHEEL(cp)	(((cp)->control[1]<<7)|((cp)->control[33]))
+#define SNDRV_GM_BREATH(cp)		(((cp)->control[2]<<7)|((cp)->control[34]))
+#define SNDRV_GM_FOOT_PEDAL(cp)		(((cp)->control[4]<<7)|((cp)->control[36]))
+#define SNDRV_GM_PORTAMENTO_TIME(cp)	(((cp)->control[5]<<7)|((cp)->control[37]))
+#define SNDRV_GM_DATA_ENTRY(cp)		(((cp)->control[6]<<7)|((cp)->control[38]))
+#define SNDRV_GM_VOLUME(cp)		(((cp)->control[7]<<7)|((cp)->control[39]))
+#define SNDRV_GM_BALANCE(cp)		(((cp)->control[8]<<7)|((cp)->control[40]))
+#define SNDRV_GM_PAN(cp)			(((cp)->control[10]<<7)|((cp)->control[42]))
+#define SNDRV_GM_EXPRESSION(cp)		(((cp)->control[11]<<7)|((cp)->control[43]))
+
+
+/* MIDI mode */
+#define SNDRV_MIDI_MODE_NONE	0	/* Generic midi */
+#define SNDRV_MIDI_MODE_GM	1
+#define SNDRV_MIDI_MODE_GS	2
+#define SNDRV_MIDI_MODE_XG	3
+#define SNDRV_MIDI_MODE_MT32	4
+
+/* MIDI note state */
+#define SNDRV_MIDI_NOTE_OFF		0x00
+#define SNDRV_MIDI_NOTE_ON		0x01
+#define SNDRV_MIDI_NOTE_RELEASED		0x02
+#define SNDRV_MIDI_NOTE_SOSTENUTO		0x04
+ 
+#define SNDRV_MIDI_PARAM_TYPE_REGISTERED		0
+#define SNDRV_MIDI_PARAM_TYPE_NONREGISTERED	1
+
+/* SYSEX parse flag */
+enum {
+	SNDRV_MIDI_SYSEX_NOT_PARSED = 0,
+	SNDRV_MIDI_SYSEX_GM_ON,	
+	SNDRV_MIDI_SYSEX_GS_ON,	
+	SNDRV_MIDI_SYSEX_GS_RESET,	
+	SNDRV_MIDI_SYSEX_GS_CHORUS_MODE,
+	SNDRV_MIDI_SYSEX_GS_REVERB_MODE,
+	SNDRV_MIDI_SYSEX_GS_MASTER_VOLUME,
+	SNDRV_MIDI_SYSEX_GS_PROGRAM,
+	SNDRV_MIDI_SYSEX_GS_DRUM_CHANNEL,
+	SNDRV_MIDI_SYSEX_XG_ON,	
+};
+
+/* Prototypes for midi_process.c */
+void snd_midi_process_event(struct snd_midi_op *ops, struct snd_seq_event *ev,
+			    struct snd_midi_channel_set *chanset);
+void snd_midi_channel_set_clear(struct snd_midi_channel_set *chset);
+struct snd_midi_channel_set *snd_midi_channel_alloc_set(int n);
+void snd_midi_channel_free_set(struct snd_midi_channel_set *chset);
+
+#endif /* __SOUND_SEQ_MIDI_EMUL_H */
diff --git a/include/sound/seq_midi_event.h b/include/sound/seq_midi_event.h
new file mode 100644
index 00000000..5efab8b2
--- /dev/null
+++ b/include/sound/seq_midi_event.h
@@ -0,0 +1,54 @@
+#ifndef __SOUND_SEQ_MIDI_EVENT_H
+#define __SOUND_SEQ_MIDI_EVENT_H
+
+/*
+ *  MIDI byte <-> sequencer event coder
+ *
+ *  Copyright (C) 1998,99 Takashi Iwai <tiwai@suse.de>,
+ *                        Jaroslav Kysela <perex@perex.cz>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include "asequencer.h"
+
+#define MAX_MIDI_EVENT_BUF	256
+
+/* midi status */
+struct snd_midi_event {
+	int qlen;		/* queue length */
+	int read;		/* chars read */
+	int type;		/* current event type */
+	unsigned char lastcmd;	/* last command (for MIDI state handling) */
+	unsigned char nostat;	/* no state flag */
+	int bufsize;		/* allocated buffer size */
+	unsigned char *buf;	/* input buffer */
+	spinlock_t lock;
+};
+
+int snd_midi_event_new(int bufsize, struct snd_midi_event **rdev);
+void snd_midi_event_free(struct snd_midi_event *dev);
+void snd_midi_event_reset_encode(struct snd_midi_event *dev);
+void snd_midi_event_reset_decode(struct snd_midi_event *dev);
+void snd_midi_event_no_status(struct snd_midi_event *dev, int on);
+/* encode from byte stream - return number of written bytes if success */
+long snd_midi_event_encode(struct snd_midi_event *dev, unsigned char *buf, long count,
+			   struct snd_seq_event *ev);
+int snd_midi_event_encode_byte(struct snd_midi_event *dev, int c, struct snd_seq_event *ev);
+/* decode from event to bytes - return number of written bytes if success */
+long snd_midi_event_decode(struct snd_midi_event *dev, unsigned char *buf, long count,
+			   struct snd_seq_event *ev);
+
+#endif /* __SOUND_SEQ_MIDI_EVENT_H */
diff --git a/include/sound/seq_oss.h b/include/sound/seq_oss.h
new file mode 100644
index 00000000..9b060bbd
--- /dev/null
+++ b/include/sound/seq_oss.h
@@ -0,0 +1,96 @@
+#ifndef __SOUND_SEQ_OSS_H
+#define __SOUND_SEQ_OSS_H
+
+/*
+ * OSS compatible sequencer driver
+ *
+ * Copyright (C) 1998,99 Takashi Iwai
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include "asequencer.h"
+#include "seq_kernel.h"
+
+/*
+ * argument structure for synthesizer operations
+ */
+struct snd_seq_oss_arg {
+	/* given by OSS sequencer */
+	int app_index;	/* application unique index */
+	int file_mode;	/* file mode - see below */
+	int seq_mode;	/* sequencer mode - see below */
+
+	/* following must be initialized in open callback */
+	struct snd_seq_addr addr;	/* opened port address */
+	void *private_data;	/* private data for lowlevel drivers */
+
+	/* note-on event passing mode: initially given by OSS seq,
+	 * but configurable by drivers - see below
+	 */
+	int event_passing;
+};
+
+
+/*
+ * synthesizer operation callbacks
+ */
+struct snd_seq_oss_callback {
+	struct module *owner;
+	int (*open)(struct snd_seq_oss_arg *p, void *closure);
+	int (*close)(struct snd_seq_oss_arg *p);
+	int (*ioctl)(struct snd_seq_oss_arg *p, unsigned int cmd, unsigned long arg);
+	int (*load_patch)(struct snd_seq_oss_arg *p, int format, const char __user *buf, int offs, int count);
+	int (*reset)(struct snd_seq_oss_arg *p);
+	int (*raw_event)(struct snd_seq_oss_arg *p, unsigned char *data);
+};
+
+/* flag: file_mode */
+#define SNDRV_SEQ_OSS_FILE_ACMODE		3
+#define SNDRV_SEQ_OSS_FILE_READ		1
+#define SNDRV_SEQ_OSS_FILE_WRITE		2
+#define SNDRV_SEQ_OSS_FILE_NONBLOCK	4
+
+/* flag: seq_mode */
+#define SNDRV_SEQ_OSS_MODE_SYNTH		0
+#define SNDRV_SEQ_OSS_MODE_MUSIC		1
+
+/* flag: event_passing */
+#define SNDRV_SEQ_OSS_PROCESS_EVENTS	0	/* key == 255 is processed as velocity change */
+#define SNDRV_SEQ_OSS_PASS_EVENTS		1	/* pass all events to callback */
+#define SNDRV_SEQ_OSS_PROCESS_KEYPRESS	2	/* key >= 128 will be processed as key-pressure */
+
+/* default control rate: fixed */
+#define SNDRV_SEQ_OSS_CTRLRATE		100
+
+/* default max queue length: configurable by module option */
+#define SNDRV_SEQ_OSS_MAX_QLEN		1024
+
+
+/*
+ * data pointer to snd_seq_register_device
+ */
+struct snd_seq_oss_reg {
+	int type;
+	int subtype;
+	int nvoices;
+	struct snd_seq_oss_callback oper;
+	void *private_data;
+};
+
+/* device id */
+#define SNDRV_SEQ_DEV_ID_OSS		"seq-oss"
+
+#endif /* __SOUND_SEQ_OSS_H */
diff --git a/include/sound/seq_oss_legacy.h b/include/sound/seq_oss_legacy.h
new file mode 100644
index 00000000..e66269ff
--- /dev/null
+++ b/include/sound/seq_oss_legacy.h
@@ -0,0 +1,31 @@
+#ifndef __SOUND_SEQ_OSS_LEGACY_H
+#define __SOUND_SEQ_OSS_LEGACY_H
+
+/*
+ * OSS compatible macro definitions
+ *
+ * Copyright (C) 2000 Abramo Bagnara <abramo@alsa-project.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/soundcard.h>
+
+#ifndef SAMPLE_TYPE_AWE32
+#define SAMPLE_TYPE_AWE32		0x20
+#endif
+
+#endif /* __SOUND_SEQ_OSS_LEGACY_H */
+
diff --git a/include/sound/seq_virmidi.h b/include/sound/seq_virmidi.h
new file mode 100644
index 00000000..d888433a
--- /dev/null
+++ b/include/sound/seq_virmidi.h
@@ -0,0 +1,81 @@
+#ifndef __SOUND_SEQ_VIRMIDI_H
+#define __SOUND_SEQ_VIRMIDI_H
+
+/*
+ *  Virtual Raw MIDI client on Sequencer
+ *  Copyright (c) 2000 by Takashi Iwai <tiwai@suse.de>,
+ *                        Jaroslav Kysela <perex@perex.cz>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include "rawmidi.h"
+#include "seq_midi_event.h"
+
+/*
+ * device file instance:
+ * This instance is created at each time the midi device file is
+ * opened.  Each instance has its own input buffer and MIDI parser
+ * (buffer), and is associated with the device instance.
+ */
+struct snd_virmidi {
+	struct list_head list;
+	int seq_mode;
+	int client;
+	int port;
+	unsigned int trigger: 1;
+	struct snd_midi_event *parser;
+	struct snd_seq_event event;
+	struct snd_virmidi_dev *rdev;
+	struct snd_rawmidi_substream *substream;
+};
+
+#define SNDRV_VIRMIDI_SUBSCRIBE		(1<<0)
+#define SNDRV_VIRMIDI_USE		(1<<1)
+
+/*
+ * device record:
+ * Each virtual midi device has one device instance.  It contains
+ * common information and the linked-list of opened files, 
+ */
+struct snd_virmidi_dev {
+	struct snd_card *card;		/* associated card */
+	struct snd_rawmidi *rmidi;		/* rawmidi device */
+	int seq_mode;			/* SNDRV_VIRMIDI_XXX */
+	int device;			/* sequencer device */
+	int client;			/* created/attached client */
+	int port;			/* created/attached port */
+	unsigned int flags;		/* SNDRV_VIRMIDI_* */
+	rwlock_t filelist_lock;
+	struct list_head filelist;
+};
+
+/* sequencer mode:
+ * ATTACH = input/output events from midi device are routed to the
+ *          attached sequencer port.  sequencer port is not created
+ *          by virmidi itself.
+ *          the input to rawmidi must be processed by passing the
+ *          incoming events via snd_virmidi_receive()
+ * DISPATCH = input/output events are routed to subscribers.
+ *            sequencer port is created in virmidi.
+ */
+#define SNDRV_VIRMIDI_SEQ_NONE		0
+#define SNDRV_VIRMIDI_SEQ_ATTACH	1
+#define SNDRV_VIRMIDI_SEQ_DISPATCH	2
+
+int snd_virmidi_new(struct snd_card *card, int device, struct snd_rawmidi **rrmidi);
+
+#endif /* __SOUND_SEQ_VIRMIDI */
diff --git a/include/sound/sfnt_info.h b/include/sound/sfnt_info.h
new file mode 100644
index 00000000..1bce7fd1
--- /dev/null
+++ b/include/sound/sfnt_info.h
@@ -0,0 +1,212 @@
+#ifndef __SOUND_SFNT_INFO_H
+#define __SOUND_SFNT_INFO_H
+
+/*
+ *  Patch record compatible with AWE driver on OSS
+ *
+ *  Copyright (C) 1999-2000 Takashi Iwai
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <sound/asound.h>
+
+/*
+ * patch information record
+ */
+
+#ifdef SNDRV_BIG_ENDIAN
+#define SNDRV_OSS_PATCHKEY(id) (0xfd00|id)
+#else
+#define SNDRV_OSS_PATCHKEY(id) ((id<<8)|0xfd)
+#endif
+
+/* patch interface header: 16 bytes */
+struct soundfont_patch_info {
+	unsigned short key;		/* use the key below */
+#define SNDRV_OSS_SOUNDFONT_PATCH		SNDRV_OSS_PATCHKEY(0x07)
+
+	short device_no;		/* synthesizer number */
+	unsigned short sf_id;		/* file id (should be zero) */
+	short optarg;			/* optional argument */
+	int len;			/* data length (without this header) */
+
+	short type;			/* patch operation type */
+#define SNDRV_SFNT_LOAD_INFO		0	/* awe_voice_rec */
+#define SNDRV_SFNT_LOAD_DATA		1	/* awe_sample_info */
+#define SNDRV_SFNT_OPEN_PATCH	2	/* awe_open_parm */
+#define SNDRV_SFNT_CLOSE_PATCH	3	/* none */
+	/* 4 is obsolete */
+#define SNDRV_SFNT_REPLACE_DATA	5	/* awe_sample_info (optarg=#channels)*/
+#define SNDRV_SFNT_MAP_PRESET	6	/* awe_voice_map */
+	/* 7 is not used */
+#define SNDRV_SFNT_PROBE_DATA		8	/* optarg=sample */
+#define SNDRV_SFNT_REMOVE_INFO		9	/* optarg=(bank<<8)|instr */
+
+	short reserved;			/* word alignment data */
+
+	/* the actual patch data begins after this */
+};
+
+
+/*
+ * open patch
+ */
+
+#define SNDRV_SFNT_PATCH_NAME_LEN	32
+
+struct soundfont_open_parm {
+	unsigned short type;		/* sample type */
+#define SNDRV_SFNT_PAT_TYPE_MISC	0
+#define SNDRV_SFNT_PAT_TYPE_GUS	6
+#define SNDRV_SFNT_PAT_TYPE_MAP	7
+#define SNDRV_SFNT_PAT_LOCKED	0x100	/* lock the samples */
+#define SNDRV_SFNT_PAT_SHARED	0x200	/* sample is shared */
+
+	short reserved;
+	char name[SNDRV_SFNT_PATCH_NAME_LEN];
+};
+
+
+/*
+ * raw voice information record
+ */
+
+/* wave table envelope & effect parameters to control EMU8000 */
+struct soundfont_voice_parm {
+	unsigned short moddelay;	/* modulation delay (0x8000) */
+	unsigned short modatkhld;	/* modulation attack & hold time (0x7f7f) */
+	unsigned short moddcysus;	/* modulation decay & sustain (0x7f7f) */
+	unsigned short modrelease;	/* modulation release time (0x807f) */
+	short modkeyhold, modkeydecay;	/* envelope change per key (not used) */
+	unsigned short voldelay;	/* volume delay (0x8000) */
+	unsigned short volatkhld;	/* volume attack & hold time (0x7f7f) */
+	unsigned short voldcysus;	/* volume decay & sustain (0x7f7f) */
+	unsigned short volrelease;	/* volume release time (0x807f) */
+	short volkeyhold, volkeydecay;	/* envelope change per key (not used) */
+	unsigned short lfo1delay;	/* LFO1 delay (0x8000) */
+	unsigned short lfo2delay;	/* LFO2 delay (0x8000) */
+	unsigned short pefe;		/* modulation pitch & cutoff (0x0000) */
+	unsigned short fmmod;		/* LFO1 pitch & cutoff (0x0000) */
+	unsigned short tremfrq;		/* LFO1 volume & freq (0x0000) */
+	unsigned short fm2frq2;		/* LFO2 pitch & freq (0x0000) */
+	unsigned char cutoff;		/* initial cutoff (0xff) */
+	unsigned char filterQ;		/* initial filter Q [0-15] (0x0) */
+	unsigned char chorus;		/* chorus send (0x00) */
+	unsigned char reverb;		/* reverb send (0x00) */
+	unsigned short reserved[4];	/* not used */
+};
+
+
+/* wave table parameters: 92 bytes */
+struct soundfont_voice_info {
+	unsigned short sf_id;		/* file id (should be zero) */
+	unsigned short sample;		/* sample id */
+	int start, end;			/* sample offset correction */
+	int loopstart, loopend;		/* loop offset correction */
+	short rate_offset;		/* sample rate pitch offset */
+	unsigned short mode;		/* sample mode */
+#define SNDRV_SFNT_MODE_ROMSOUND		0x8000
+#define SNDRV_SFNT_MODE_STEREO		1
+#define SNDRV_SFNT_MODE_LOOPING		2
+#define SNDRV_SFNT_MODE_NORELEASE		4	/* obsolete */
+#define SNDRV_SFNT_MODE_INIT_PARM		8
+
+	short root;			/* midi root key */
+	short tune;			/* pitch tuning (in cents) */
+	unsigned char low, high;	/* key note range */
+	unsigned char vellow, velhigh;	/* velocity range */
+	signed char fixkey, fixvel;	/* fixed key, velocity */
+	signed char pan, fixpan;	/* panning, fixed panning */
+	short exclusiveClass;		/* exclusive class (0 = none) */
+	unsigned char amplitude;	/* sample volume (127 max) */
+	unsigned char attenuation;	/* attenuation (0.375dB) */
+	short scaleTuning;		/* pitch scale tuning(%), normally 100 */
+	struct soundfont_voice_parm parm;	/* voice envelope parameters */
+	unsigned short sample_mode;	/* sample mode_flag (set by driver) */
+};
+
+
+/* instrument info header: 4 bytes */
+struct soundfont_voice_rec_hdr {
+	unsigned char bank;		/* midi bank number */
+	unsigned char instr;		/* midi preset number */
+	char nvoices;			/* number of voices */
+	char write_mode;		/* write mode; normally 0 */
+#define SNDRV_SFNT_WR_APPEND		0	/* append anyway */
+#define SNDRV_SFNT_WR_EXCLUSIVE		1	/* skip if already exists */
+#define SNDRV_SFNT_WR_REPLACE		2	/* replace if already exists */
+};
+
+
+/*
+ * sample wave information
+ */
+
+/* wave table sample header: 32 bytes */
+struct soundfont_sample_info {
+	unsigned short sf_id;		/* file id (should be zero) */
+	unsigned short sample;		/* sample id */
+	int start, end;			/* start & end offset */
+	int loopstart, loopend;		/* loop start & end offset */
+	int size;			/* size (0 = ROM) */
+	short dummy;			/* not used */
+	unsigned short mode_flags;	/* mode flags */
+#define SNDRV_SFNT_SAMPLE_8BITS		1	/* wave data is 8bits */
+#define SNDRV_SFNT_SAMPLE_UNSIGNED	2	/* wave data is unsigned */
+#define SNDRV_SFNT_SAMPLE_NO_BLANK	4	/* no blank loop is attached */
+#define SNDRV_SFNT_SAMPLE_SINGLESHOT	8	/* single-shot w/o loop */
+#define SNDRV_SFNT_SAMPLE_BIDIR_LOOP	16	/* bidirectional looping */
+#define SNDRV_SFNT_SAMPLE_STEREO_LEFT	32	/* stereo left sound */
+#define SNDRV_SFNT_SAMPLE_STEREO_RIGHT	64	/* stereo right sound */
+#define SNDRV_SFNT_SAMPLE_REVERSE_LOOP	128	/* reverse looping */
+	unsigned int truesize;		/* used memory size (set by driver) */
+};
+
+
+/*
+ * voice preset mapping (aliasing)
+ */
+
+struct soundfont_voice_map {
+	int map_bank, map_instr, map_key;	/* key = -1 means all keys */
+	int src_bank, src_instr, src_key;
+};
+
+
+/*
+ * ioctls for hwdep
+ */
+
+#define SNDRV_EMUX_HWDEP_NAME	"Emux WaveTable"
+
+#define SNDRV_EMUX_VERSION	((1 << 16) | (0 << 8) | 0)	/* 1.0.0 */
+
+struct snd_emux_misc_mode {
+	int port;	/* -1 = all */
+	int mode;
+	int value;
+	int value2;	/* reserved */
+};
+
+#define SNDRV_EMUX_IOCTL_VERSION	_IOR('H', 0x80, unsigned int)
+#define SNDRV_EMUX_IOCTL_LOAD_PATCH	_IOWR('H', 0x81, struct soundfont_patch_info)
+#define SNDRV_EMUX_IOCTL_RESET_SAMPLES	_IO('H', 0x82)
+#define SNDRV_EMUX_IOCTL_REMOVE_LAST_SAMPLES _IO('H', 0x83)
+#define SNDRV_EMUX_IOCTL_MEM_AVAIL	_IOW('H', 0x84, int)
+#define SNDRV_EMUX_IOCTL_MISC_MODE	_IOWR('H', 0x84, struct snd_emux_misc_mode)
+
+#endif /* __SOUND_SFNT_INFO_H */
diff --git a/include/sound/sh_dac_audio.h b/include/sound/sh_dac_audio.h
new file mode 100644
index 00000000..f5deaf1d
--- /dev/null
+++ b/include/sound/sh_dac_audio.h
@@ -0,0 +1,21 @@
+/*
+ * SH_DAC specific configuration, for the dac_audio platform_device
+ *
+ * Copyright (C) 2009 Rafael Ignacio Zurita <rizurita@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef __INCLUDE_SH_DAC_AUDIO_H
+#define __INCLUDE_SH_DAC_AUDIO_H
+
+struct dac_audio_pdata {
+	int buffer_size;
+	int channel;
+	void (*start)(struct dac_audio_pdata *pd);
+	void (*stop)(struct dac_audio_pdata *pd);
+};
+
+#endif /* __INCLUDE_SH_DAC_AUDIO_H */
diff --git a/include/sound/sh_fsi.h b/include/sound/sh_fsi.h
new file mode 100644
index 00000000..b457e87f
--- /dev/null
+++ b/include/sound/sh_fsi.h
@@ -0,0 +1,99 @@
+#ifndef __SOUND_FSI_H
+#define __SOUND_FSI_H
+
+/*
+ * Fifo-attached Serial Interface (FSI) support for SH7724
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define FSI_PORT_A	0
+#define FSI_PORT_B	1
+
+#include <linux/clk.h>
+#include <sound/soc.h>
+
+/*
+ * flags format
+ *
+ * 0x000000BA
+ *
+ * A:  inversion
+ * B:  format mode
+ */
+
+/* A: clock inversion */
+#define SH_FSI_INVERSION_MASK	0x0000000F
+#define SH_FSI_LRM_INV		(1 << 0)
+#define SH_FSI_BRM_INV		(1 << 1)
+#define SH_FSI_LRS_INV		(1 << 2)
+#define SH_FSI_BRS_INV		(1 << 3)
+
+/* B: format mode */
+#define SH_FSI_FMT_MASK		0x000000F0
+#define SH_FSI_FMT_DAI		(0 << 4)
+#define SH_FSI_FMT_SPDIF	(1 << 4)
+
+
+/*
+ * set_rate return value
+ *
+ * see ACKMD/BPFMD on
+ *     ACK_MD (FSI2)
+ *     CKG1   (FSI)
+ *
+ * err		: return value <  0
+ * no change	: return value == 0
+ * change xMD	: return value >  0
+ *
+ * 0x-00000AB
+ *
+ * A:  ACKMD value
+ * B:  BPFMD value
+ */
+
+#define SH_FSI_ACKMD_MASK	(0xF << 0)
+#define SH_FSI_ACKMD_512	(1 << 0)
+#define SH_FSI_ACKMD_256	(2 << 0)
+#define SH_FSI_ACKMD_128	(3 << 0)
+#define SH_FSI_ACKMD_64		(4 << 0)
+#define SH_FSI_ACKMD_32		(5 << 0)
+
+#define SH_FSI_BPFMD_MASK	(0xF << 4)
+#define SH_FSI_BPFMD_512	(1 << 4)
+#define SH_FSI_BPFMD_256	(2 << 4)
+#define SH_FSI_BPFMD_128	(3 << 4)
+#define SH_FSI_BPFMD_64		(4 << 4)
+#define SH_FSI_BPFMD_32		(5 << 4)
+#define SH_FSI_BPFMD_16		(6 << 4)
+
+struct sh_fsi_port_info {
+	unsigned long flags;
+	int tx_id;
+	int rx_id;
+	int (*set_rate)(struct device *dev, int rate, int enable);
+};
+
+struct sh_fsi_platform_info {
+	struct sh_fsi_port_info port_a;
+	struct sh_fsi_port_info port_b;
+};
+
+/*
+ * for fsi-ak4642
+ */
+struct fsi_ak4642_info {
+	const char *name;
+	const char *card;
+	const char *cpu_dai;
+	const char *codec;
+	const char *platform;
+	int id;
+};
+
+#endif /* __SOUND_FSI_H */
diff --git a/include/sound/snd_wavefront.h b/include/sound/snd_wavefront.h
new file mode 100644
index 00000000..fa149ca7
--- /dev/null
+++ b/include/sound/snd_wavefront.h
@@ -0,0 +1,142 @@
+#ifndef __SOUND_SND_WAVEFRONT_H__
+#define __SOUND_SND_WAVEFRONT_H__
+
+#include "mpu401.h"
+#include "hwdep.h"
+#include "rawmidi.h"
+#include "wavefront.h"  /* generic OSS/ALSA/user-level wavefront header */
+
+/* MIDI interface */
+
+struct _snd_wavefront_midi;
+struct _snd_wavefront_card;
+struct _snd_wavefront;
+
+typedef struct _snd_wavefront_midi snd_wavefront_midi_t;
+typedef struct _snd_wavefront_card snd_wavefront_card_t;
+typedef struct _snd_wavefront snd_wavefront_t;
+
+typedef enum { internal_mpu = 0, external_mpu = 1 } snd_wavefront_mpu_id;
+
+struct _snd_wavefront_midi {
+        unsigned long            base;        /* I/O port address */
+	char                     isvirtual;   /* doing virtual MIDI stuff ? */
+	char			 istimer;     /* timer is used */
+        snd_wavefront_mpu_id     output_mpu;  /* most-recently-used */
+        snd_wavefront_mpu_id     input_mpu;   /* most-recently-used */
+        unsigned int             mode[2];     /* MPU401_MODE_XXX */
+	struct snd_rawmidi_substream	 *substream_output[2];
+	struct snd_rawmidi_substream	 *substream_input[2];
+	struct timer_list	 timer;
+        spinlock_t               open;
+        spinlock_t               virtual;     /* protects isvirtual */
+};
+
+#define	OUTPUT_READY	0x40
+#define	INPUT_AVAIL	0x80
+#define	MPU_ACK		0xFE
+#define	UART_MODE_ON	0x3F
+
+extern struct snd_rawmidi_ops snd_wavefront_midi_output;
+extern struct snd_rawmidi_ops snd_wavefront_midi_input;
+
+extern void   snd_wavefront_midi_enable_virtual (snd_wavefront_card_t *);
+extern void   snd_wavefront_midi_disable_virtual (snd_wavefront_card_t *);
+extern void   snd_wavefront_midi_interrupt (snd_wavefront_card_t *);
+extern int    snd_wavefront_midi_start (snd_wavefront_card_t *);
+
+struct _snd_wavefront {
+	unsigned long    irq;   /* "you were one, one of the few ..." */
+	unsigned long    base;  /* low i/o port address */
+	struct resource	 *res_base; /* i/o port resource allocation */
+
+#define mpu_data_port    base 
+#define mpu_command_port base + 1 /* write semantics */
+#define mpu_status_port  base + 1 /* read semantics */
+#define data_port        base + 2 
+#define status_port      base + 3 /* read semantics */
+#define control_port     base + 3 /* write semantics  */
+#define block_port       base + 4 /* 16 bit, writeonly */
+#define last_block_port  base + 6 /* 16 bit, writeonly */
+
+	/* FX ports. These are mapped through the ICS2115 to the YS225.
+	   The ICS2115 takes care of flipping the relevant pins on the
+	   YS225 so that access to each of these ports does the right
+	   thing. Note: these are NOT documented by Turtle Beach.
+	*/
+
+#define fx_status       base + 8 
+#define fx_op           base + 8 
+#define fx_lcr          base + 9 
+#define fx_dsp_addr     base + 0xa
+#define fx_dsp_page     base + 0xb 
+#define fx_dsp_lsb      base + 0xc 
+#define fx_dsp_msb      base + 0xd 
+#define fx_mod_addr     base + 0xe
+#define fx_mod_data     base + 0xf 
+
+	volatile int irq_ok;               /* set by interrupt handler */
+        volatile int irq_cnt;              /* ditto */
+	char debug;                        /* debugging flags */
+	int freemem;                       /* installed RAM, in bytes */ 
+
+	char fw_version[2];                /* major = [0], minor = [1] */
+	char hw_version[2];                /* major = [0], minor = [1] */
+	char israw;                        /* needs Motorola microcode */
+	char has_fx;                       /* has FX processor (Tropez+) */
+	char fx_initialized;               /* FX's register pages initialized */
+	char prog_status[WF_MAX_PROGRAM];  /* WF_SLOT_* */
+	char patch_status[WF_MAX_PATCH];   /* WF_SLOT_* */
+	char sample_status[WF_MAX_SAMPLE]; /* WF_ST_* | WF_SLOT_* */
+	int samples_used;                  /* how many */
+	char interrupts_are_midi;          /* h/w MPU interrupts enabled ? */
+	char rom_samples_rdonly;           /* can we write on ROM samples */
+	spinlock_t irq_lock;
+	wait_queue_head_t interrupt_sleeper; 
+	snd_wavefront_midi_t midi;         /* ICS2115 MIDI interface */
+	struct snd_card *card;
+};
+
+struct _snd_wavefront_card {
+	snd_wavefront_t wavefront;
+#ifdef CONFIG_PNP
+	struct pnp_dev *wss;
+	struct pnp_dev *ctrl;
+	struct pnp_dev *mpu;
+	struct pnp_dev *synth;
+#endif /* CONFIG_PNP */
+};
+
+extern void snd_wavefront_internal_interrupt (snd_wavefront_card_t *card);
+extern int  snd_wavefront_detect_irq (snd_wavefront_t *dev) ;
+extern int  snd_wavefront_check_irq (snd_wavefront_t *dev, int irq);
+extern int  snd_wavefront_restart (snd_wavefront_t *dev);
+extern int  snd_wavefront_start (snd_wavefront_t *dev);
+extern int  snd_wavefront_detect (snd_wavefront_card_t *card);
+extern int  snd_wavefront_config_midi (snd_wavefront_t *dev) ;
+extern int  snd_wavefront_cmd (snd_wavefront_t *, int, unsigned char *,
+			       unsigned char *);
+
+extern int snd_wavefront_synth_ioctl   (struct snd_hwdep *, 
+					struct file *,
+					unsigned int cmd, 
+					unsigned long arg);
+extern int  snd_wavefront_synth_open    (struct snd_hwdep *, struct file *);
+extern int  snd_wavefront_synth_release (struct snd_hwdep *, struct file *);
+
+/* FX processor - see also yss225.[ch] */
+
+extern int  snd_wavefront_fx_start  (snd_wavefront_t *);
+extern int  snd_wavefront_fx_detect (snd_wavefront_t *);
+extern int  snd_wavefront_fx_ioctl  (struct snd_hwdep *, 
+				     struct file *,
+				     unsigned int cmd, 
+				     unsigned long arg);
+extern int snd_wavefront_fx_open    (struct snd_hwdep *, struct file *);
+extern int snd_wavefront_fx_release (struct snd_hwdep *, struct file *);
+
+/* prefix in all snd_printk() delivered messages */
+
+#define LOGNAME "WaveFront: "
+
+#endif  /* __SOUND_SND_WAVEFRONT_H__ */
diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h
new file mode 100644
index 00000000..c429f248
--- /dev/null
+++ b/include/sound/soc-dai.h
@@ -0,0 +1,290 @@
+/*
+ * linux/sound/soc-dai.h -- ALSA SoC Layer
+ *
+ * Copyright:	2005-2008 Wolfson Microelectronics. PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Digital Audio Interface (DAI) API.
+ */
+
+#ifndef __LINUX_SND_SOC_DAI_H
+#define __LINUX_SND_SOC_DAI_H
+
+
+#include <linux/list.h>
+
+struct snd_pcm_substream;
+struct snd_soc_dapm_widget;
+
+/*
+ * DAI hardware audio formats.
+ *
+ * Describes the physical PCM data formating and clocking. Add new formats
+ * to the end.
+ */
+#define SND_SOC_DAIFMT_I2S		1 /* I2S mode */
+#define SND_SOC_DAIFMT_RIGHT_J		2 /* Right Justified mode */
+#define SND_SOC_DAIFMT_LEFT_J		3 /* Left Justified mode */
+#define SND_SOC_DAIFMT_DSP_A		4 /* L data MSB after FRM LRC */
+#define SND_SOC_DAIFMT_DSP_B		5 /* L data MSB during FRM LRC */
+#define SND_SOC_DAIFMT_AC97		6 /* AC97 */
+#define SND_SOC_DAIFMT_PDM		7 /* Pulse density modulation */
+
+/* left and right justified also known as MSB and LSB respectively */
+#define SND_SOC_DAIFMT_MSB		SND_SOC_DAIFMT_LEFT_J
+#define SND_SOC_DAIFMT_LSB		SND_SOC_DAIFMT_RIGHT_J
+
+/*
+ * DAI Clock gating.
+ *
+ * DAI bit clocks can be be gated (disabled) when the DAI is not
+ * sending or receiving PCM data in a frame. This can be used to save power.
+ */
+#define SND_SOC_DAIFMT_CONT		(1 << 4) /* continuous clock */
+#define SND_SOC_DAIFMT_GATED		(2 << 4) /* clock is gated */
+
+/*
+ * DAI hardware signal inversions.
+ *
+ * Specifies whether the DAI can also support inverted clocks for the specified
+ * format.
+ */
+#define SND_SOC_DAIFMT_NB_NF		(1 << 8) /* normal bit clock + frame */
+#define SND_SOC_DAIFMT_NB_IF		(2 << 8) /* normal BCLK + inv FRM */
+#define SND_SOC_DAIFMT_IB_NF		(3 << 8) /* invert BCLK + nor FRM */
+#define SND_SOC_DAIFMT_IB_IF		(4 << 8) /* invert BCLK + FRM */
+
+/*
+ * DAI hardware clock masters.
+ *
+ * This is wrt the codec, the inverse is true for the interface
+ * i.e. if the codec is clk and FRM master then the interface is
+ * clk and frame slave.
+ */
+#define SND_SOC_DAIFMT_CBM_CFM		(1 << 12) /* codec clk & FRM master */
+#define SND_SOC_DAIFMT_CBS_CFM		(2 << 12) /* codec clk slave & FRM master */
+#define SND_SOC_DAIFMT_CBM_CFS		(3 << 12) /* codec clk master & frame slave */
+#define SND_SOC_DAIFMT_CBS_CFS		(4 << 12) /* codec clk & FRM slave */
+
+#define SND_SOC_DAIFMT_FORMAT_MASK	0x000f
+#define SND_SOC_DAIFMT_CLOCK_MASK	0x00f0
+#define SND_SOC_DAIFMT_INV_MASK		0x0f00
+#define SND_SOC_DAIFMT_MASTER_MASK	0xf000
+
+/*
+ * Master Clock Directions
+ */
+#define SND_SOC_CLOCK_IN		0
+#define SND_SOC_CLOCK_OUT		1
+
+#define SND_SOC_STD_AC97_FMTS (SNDRV_PCM_FMTBIT_S8 |\
+			       SNDRV_PCM_FMTBIT_S16_LE |\
+			       SNDRV_PCM_FMTBIT_S16_BE |\
+			       SNDRV_PCM_FMTBIT_S20_3LE |\
+			       SNDRV_PCM_FMTBIT_S20_3BE |\
+			       SNDRV_PCM_FMTBIT_S24_3LE |\
+			       SNDRV_PCM_FMTBIT_S24_3BE |\
+                               SNDRV_PCM_FMTBIT_S32_LE |\
+                               SNDRV_PCM_FMTBIT_S32_BE)
+
+struct snd_soc_dai_driver;
+struct snd_soc_dai;
+struct snd_ac97_bus_ops;
+
+/* Digital Audio Interface registration */
+int snd_soc_register_dai(struct device *dev,
+		struct snd_soc_dai_driver *dai_drv);
+void snd_soc_unregister_dai(struct device *dev);
+int snd_soc_register_dais(struct device *dev,
+		struct snd_soc_dai_driver *dai_drv, size_t count);
+void snd_soc_unregister_dais(struct device *dev, size_t count);
+
+/* Digital Audio Interface clocking API.*/
+int snd_soc_dai_set_sysclk(struct snd_soc_dai *dai, int clk_id,
+	unsigned int freq, int dir);
+
+int snd_soc_dai_set_clkdiv(struct snd_soc_dai *dai,
+	int div_id, int div);
+
+int snd_soc_dai_set_pll(struct snd_soc_dai *dai,
+	int pll_id, int source, unsigned int freq_in, unsigned int freq_out);
+
+/* Digital Audio interface formatting */
+int snd_soc_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt);
+
+int snd_soc_dai_set_tdm_slot(struct snd_soc_dai *dai,
+	unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width);
+
+int snd_soc_dai_set_channel_map(struct snd_soc_dai *dai,
+	unsigned int tx_num, unsigned int *tx_slot,
+	unsigned int rx_num, unsigned int *rx_slot);
+
+int snd_soc_dai_set_tristate(struct snd_soc_dai *dai, int tristate);
+
+/* Digital Audio Interface mute */
+int snd_soc_dai_digital_mute(struct snd_soc_dai *dai, int mute);
+
+struct snd_soc_dai_ops {
+	/*
+	 * DAI clocking configuration, all optional.
+	 * Called by soc_card drivers, normally in their hw_params.
+	 */
+	int (*set_sysclk)(struct snd_soc_dai *dai,
+		int clk_id, unsigned int freq, int dir);
+	int (*set_pll)(struct snd_soc_dai *dai, int pll_id, int source,
+		unsigned int freq_in, unsigned int freq_out);
+	int (*set_clkdiv)(struct snd_soc_dai *dai, int div_id, int div);
+
+	/*
+	 * DAI format configuration
+	 * Called by soc_card drivers, normally in their hw_params.
+	 */
+	int (*set_fmt)(struct snd_soc_dai *dai, unsigned int fmt);
+	int (*set_tdm_slot)(struct snd_soc_dai *dai,
+		unsigned int tx_mask, unsigned int rx_mask,
+		int slots, int slot_width);
+	int (*set_channel_map)(struct snd_soc_dai *dai,
+		unsigned int tx_num, unsigned int *tx_slot,
+		unsigned int rx_num, unsigned int *rx_slot);
+	int (*set_tristate)(struct snd_soc_dai *dai, int tristate);
+
+	/*
+	 * DAI digital mute - optional.
+	 * Called by soc-core to minimise any pops.
+	 */
+	int (*digital_mute)(struct snd_soc_dai *dai, int mute);
+
+	/*
+	 * ALSA PCM audio operations - all optional.
+	 * Called by soc-core during audio PCM operations.
+	 */
+	int (*startup)(struct snd_pcm_substream *,
+		struct snd_soc_dai *);
+	void (*shutdown)(struct snd_pcm_substream *,
+		struct snd_soc_dai *);
+	int (*hw_params)(struct snd_pcm_substream *,
+		struct snd_pcm_hw_params *, struct snd_soc_dai *);
+	int (*hw_free)(struct snd_pcm_substream *,
+		struct snd_soc_dai *);
+	int (*prepare)(struct snd_pcm_substream *,
+		struct snd_soc_dai *);
+	int (*trigger)(struct snd_pcm_substream *, int,
+		struct snd_soc_dai *);
+	/*
+	 * For hardware based FIFO caused delay reporting.
+	 * Optional.
+	 */
+	snd_pcm_sframes_t (*delay)(struct snd_pcm_substream *,
+		struct snd_soc_dai *);
+};
+
+/*
+ * Digital Audio Interface Driver.
+ *
+ * Describes the Digital Audio Interface in terms of its ALSA, DAI and AC97
+ * operations and capabilities. Codec and platform drivers will register this
+ * structure for every DAI they have.
+ *
+ * This structure covers the clocking, formating and ALSA operations for each
+ * interface.
+ */
+struct snd_soc_dai_driver {
+	/* DAI description */
+	const char *name;
+	unsigned int id;
+	int ac97_control;
+
+	/* DAI driver callbacks */
+	int (*probe)(struct snd_soc_dai *dai);
+	int (*remove)(struct snd_soc_dai *dai);
+	int (*suspend)(struct snd_soc_dai *dai);
+	int (*resume)(struct snd_soc_dai *dai);
+
+	/* ops */
+	const struct snd_soc_dai_ops *ops;
+
+	/* DAI capabilities */
+	struct snd_soc_pcm_stream capture;
+	struct snd_soc_pcm_stream playback;
+	unsigned int symmetric_rates:1;
+
+	/* probe ordering - for components with runtime dependencies */
+	int probe_order;
+	int remove_order;
+};
+
+/*
+ * Digital Audio Interface runtime data.
+ *
+ * Holds runtime data for a DAI.
+ */
+struct snd_soc_dai {
+	const char *name;
+	int id;
+	struct device *dev;
+	void *ac97_pdata;	/* platform_data for the ac97 codec */
+
+	/* driver ops */
+	struct snd_soc_dai_driver *driver;
+
+	/* DAI runtime info */
+	unsigned int capture_active:1;		/* stream is in use */
+	unsigned int playback_active:1;		/* stream is in use */
+	unsigned int symmetric_rates:1;
+	struct snd_pcm_runtime *runtime;
+	unsigned int active;
+	unsigned char pop_wait:1;
+	unsigned char probed:1;
+
+	struct snd_soc_dapm_widget *playback_widget;
+	struct snd_soc_dapm_widget *capture_widget;
+
+	/* DAI DMA data */
+	void *playback_dma_data;
+	void *capture_dma_data;
+
+	/* Symmetry data - only valid if symmetry is being enforced */
+	unsigned int rate;
+
+	/* parent platform/codec */
+	struct snd_soc_platform *platform;
+	struct snd_soc_codec *codec;
+
+	struct snd_soc_card *card;
+
+	struct list_head list;
+	struct list_head card_list;
+};
+
+static inline void *snd_soc_dai_get_dma_data(const struct snd_soc_dai *dai,
+					     const struct snd_pcm_substream *ss)
+{
+	return (ss->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+		dai->playback_dma_data : dai->capture_dma_data;
+}
+
+static inline void snd_soc_dai_set_dma_data(struct snd_soc_dai *dai,
+					    const struct snd_pcm_substream *ss,
+					    void *data)
+{
+	if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dai->playback_dma_data = data;
+	else
+		dai->capture_dma_data = data;
+}
+
+static inline void snd_soc_dai_set_drvdata(struct snd_soc_dai *dai,
+		void *data)
+{
+	dev_set_drvdata(dai->dev, data);
+}
+
+static inline void *snd_soc_dai_get_drvdata(struct snd_soc_dai *dai)
+{
+	return dev_get_drvdata(dai->dev);
+}
+
+#endif
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
new file mode 100644
index 00000000..055242e6
--- /dev/null
+++ b/include/sound/soc-dapm.h
@@ -0,0 +1,582 @@
+/*
+ * linux/sound/soc-dapm.h -- ALSA SoC Dynamic Audio Power Management
+ *
+ * Author:		Liam Girdwood
+ * Created:		Aug 11th 2005
+ * Copyright:	Wolfson Microelectronics. PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_SOC_DAPM_H
+#define __LINUX_SND_SOC_DAPM_H
+
+#include <linux/types.h>
+#include <sound/control.h>
+
+struct device;
+
+/* widget has no PM register bit */
+#define SND_SOC_NOPM	-1
+
+/*
+ * SoC dynamic audio power management
+ *
+ * We can have up to 4 power domains
+ *  1. Codec domain - VREF, VMID
+ *     Usually controlled at codec probe/remove, although can be set
+ *     at stream time if power is not needed for sidetone, etc.
+ *  2. Platform/Machine domain - physically connected inputs and outputs
+ *     Is platform/machine and user action specific, is set in the machine
+ *     driver and by userspace e.g when HP are inserted
+ *  3. Path domain - Internal codec path mixers
+ *     Are automatically set when mixer and mux settings are
+ *     changed by the user.
+ *  4. Stream domain - DAC's and ADC's.
+ *     Enabled when stream playback/capture is started.
+ */
+
+/* codec domain */
+#define SND_SOC_DAPM_VMID(wname) \
+{	.id = snd_soc_dapm_vmid, .name = wname, .kcontrol_news = NULL, \
+	.num_kcontrols = 0}
+
+/* platform domain */
+#define SND_SOC_DAPM_SIGGEN(wname) \
+{	.id = snd_soc_dapm_siggen, .name = wname, .kcontrol_news = NULL, \
+	.num_kcontrols = 0, .reg = SND_SOC_NOPM }
+#define SND_SOC_DAPM_INPUT(wname) \
+{	.id = snd_soc_dapm_input, .name = wname, .kcontrol_news = NULL, \
+	.num_kcontrols = 0, .reg = SND_SOC_NOPM }
+#define SND_SOC_DAPM_OUTPUT(wname) \
+{	.id = snd_soc_dapm_output, .name = wname, .kcontrol_news = NULL, \
+	.num_kcontrols = 0, .reg = SND_SOC_NOPM }
+#define SND_SOC_DAPM_MIC(wname, wevent) \
+{	.id = snd_soc_dapm_mic, .name = wname, .kcontrol_news = NULL, \
+	.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
+	.event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD}
+#define SND_SOC_DAPM_HP(wname, wevent) \
+{	.id = snd_soc_dapm_hp, .name = wname, .kcontrol_news = NULL, \
+	.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
+	.event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD}
+#define SND_SOC_DAPM_SPK(wname, wevent) \
+{	.id = snd_soc_dapm_spk, .name = wname, .kcontrol_news = NULL, \
+	.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
+	.event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD}
+#define SND_SOC_DAPM_LINE(wname, wevent) \
+{	.id = snd_soc_dapm_line, .name = wname, .kcontrol_news = NULL, \
+	.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
+	.event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD}
+
+/* path domain */
+#define SND_SOC_DAPM_PGA(wname, wreg, wshift, winvert,\
+	 wcontrols, wncontrols) \
+{	.id = snd_soc_dapm_pga, .name = wname, .reg = wreg, .shift = wshift, \
+	.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = wncontrols}
+#define SND_SOC_DAPM_OUT_DRV(wname, wreg, wshift, winvert,\
+	 wcontrols, wncontrols) \
+{	.id = snd_soc_dapm_out_drv, .name = wname, .reg = wreg, .shift = wshift, \
+	.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = wncontrols}
+#define SND_SOC_DAPM_MIXER(wname, wreg, wshift, winvert, \
+	 wcontrols, wncontrols)\
+{	.id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \
+	.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = wncontrols}
+#define SND_SOC_DAPM_MIXER_NAMED_CTL(wname, wreg, wshift, winvert, \
+	 wcontrols, wncontrols)\
+{       .id = snd_soc_dapm_mixer_named_ctl, .name = wname, .reg = wreg, \
+	.shift = wshift, .invert = winvert, .kcontrol_news = wcontrols, \
+	.num_kcontrols = wncontrols}
+#define SND_SOC_DAPM_MICBIAS(wname, wreg, wshift, winvert) \
+{	.id = snd_soc_dapm_micbias, .name = wname, .reg = wreg, .shift = wshift, \
+	.invert = winvert, .kcontrol_news = NULL, .num_kcontrols = 0}
+#define SND_SOC_DAPM_SWITCH(wname, wreg, wshift, winvert, wcontrols) \
+{	.id = snd_soc_dapm_switch, .name = wname, .reg = wreg, .shift = wshift, \
+	.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = 1}
+#define SND_SOC_DAPM_MUX(wname, wreg, wshift, winvert, wcontrols) \
+{	.id = snd_soc_dapm_mux, .name = wname, .reg = wreg, .shift = wshift, \
+	.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = 1}
+#define SND_SOC_DAPM_VIRT_MUX(wname, wreg, wshift, winvert, wcontrols) \
+{	.id = snd_soc_dapm_virt_mux, .name = wname, .reg = wreg, .shift = wshift, \
+	.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = 1}
+#define SND_SOC_DAPM_VALUE_MUX(wname, wreg, wshift, winvert, wcontrols) \
+{	.id = snd_soc_dapm_value_mux, .name = wname, .reg = wreg, \
+	.shift = wshift, .invert = winvert, .kcontrol_news = wcontrols, \
+	.num_kcontrols = 1}
+
+/* Simplified versions of above macros, assuming wncontrols = ARRAY_SIZE(wcontrols) */
+#define SOC_PGA_ARRAY(wname, wreg, wshift, winvert,\
+	 wcontrols) \
+{	.id = snd_soc_dapm_pga, .name = wname, .reg = wreg, .shift = wshift, \
+	.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols)}
+#define SOC_MIXER_ARRAY(wname, wreg, wshift, winvert, \
+	 wcontrols)\
+{	.id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \
+	.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols)}
+#define SOC_MIXER_NAMED_CTL_ARRAY(wname, wreg, wshift, winvert, \
+	 wcontrols)\
+{       .id = snd_soc_dapm_mixer_named_ctl, .name = wname, .reg = wreg, \
+	.shift = wshift, .invert = winvert, .kcontrol_news = wcontrols, \
+	.num_kcontrols = ARRAY_SIZE(wcontrols)}
+
+/* path domain with event - event handler must return 0 for success */
+#define SND_SOC_DAPM_PGA_E(wname, wreg, wshift, winvert, wcontrols, \
+	wncontrols, wevent, wflags) \
+{	.id = snd_soc_dapm_pga, .name = wname, .reg = wreg, .shift = wshift, \
+	.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = wncontrols, \
+	.event = wevent, .event_flags = wflags}
+#define SND_SOC_DAPM_OUT_DRV_E(wname, wreg, wshift, winvert, wcontrols, \
+	wncontrols, wevent, wflags) \
+{	.id = snd_soc_dapm_out_drv, .name = wname, .reg = wreg, .shift = wshift, \
+	.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = wncontrols, \
+	.event = wevent, .event_flags = wflags}
+#define SND_SOC_DAPM_MIXER_E(wname, wreg, wshift, winvert, wcontrols, \
+	wncontrols, wevent, wflags) \
+{	.id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \
+	.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = wncontrols, \
+	.event = wevent, .event_flags = wflags}
+#define SND_SOC_DAPM_MIXER_NAMED_CTL_E(wname, wreg, wshift, winvert, \
+	wcontrols, wncontrols, wevent, wflags) \
+{       .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \
+	.invert = winvert, .kcontrol_news = wcontrols, \
+	.num_kcontrols = wncontrols, .event = wevent, .event_flags = wflags}
+#define SND_SOC_DAPM_MICBIAS_E(wname, wreg, wshift, winvert, wevent, wflags) \
+{	.id = snd_soc_dapm_micbias, .name = wname, .reg = wreg, .shift = wshift, \
+	.invert = winvert, .kcontrol_news = NULL, .num_kcontrols = 0, \
+	.event = wevent, .event_flags = wflags}
+#define SND_SOC_DAPM_SWITCH_E(wname, wreg, wshift, winvert, wcontrols, \
+	wevent, wflags) \
+{	.id = snd_soc_dapm_switch, .name = wname, .reg = wreg, .shift = wshift, \
+	.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = 1, \
+	.event = wevent, .event_flags = wflags}
+#define SND_SOC_DAPM_MUX_E(wname, wreg, wshift, winvert, wcontrols, \
+	wevent, wflags) \
+{	.id = snd_soc_dapm_mux, .name = wname, .reg = wreg, .shift = wshift, \
+	.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = 1, \
+	.event = wevent, .event_flags = wflags}
+#define SND_SOC_DAPM_VIRT_MUX_E(wname, wreg, wshift, winvert, wcontrols, \
+	wevent, wflags) \
+{	.id = snd_soc_dapm_virt_mux, .name = wname, .reg = wreg, .shift = wshift, \
+	.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = 1, \
+	.event = wevent, .event_flags = wflags}
+
+/* additional sequencing control within an event type */
+#define SND_SOC_DAPM_PGA_S(wname, wsubseq, wreg, wshift, winvert, \
+	wevent, wflags) \
+{	.id = snd_soc_dapm_pga, .name = wname, .reg = wreg, .shift = wshift, \
+	.invert = winvert, .event = wevent, .event_flags = wflags, \
+	.subseq = wsubseq}
+#define SND_SOC_DAPM_SUPPLY_S(wname, wsubseq, wreg, wshift, winvert, wevent, \
+	wflags)	\
+{	.id = snd_soc_dapm_supply, .name = wname, .reg = wreg,	\
+	.shift = wshift, .invert = winvert, .event = wevent, \
+	.event_flags = wflags, .subseq = wsubseq}
+
+/* Simplified versions of above macros, assuming wncontrols = ARRAY_SIZE(wcontrols) */
+#define SOC_PGA_E_ARRAY(wname, wreg, wshift, winvert, wcontrols, \
+	wevent, wflags) \
+{	.id = snd_soc_dapm_pga, .name = wname, .reg = wreg, .shift = wshift, \
+	.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols), \
+	.event = wevent, .event_flags = wflags}
+#define SOC_MIXER_E_ARRAY(wname, wreg, wshift, winvert, wcontrols, \
+	wevent, wflags) \
+{	.id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \
+	.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols), \
+	.event = wevent, .event_flags = wflags}
+#define SOC_MIXER_NAMED_CTL_E_ARRAY(wname, wreg, wshift, winvert, \
+	wcontrols, wevent, wflags) \
+{       .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \
+	.invert = winvert, .kcontrol_news = wcontrols, \
+	.num_kcontrols = ARRAY_SIZE(wcontrols), .event = wevent, .event_flags = wflags}
+
+/* events that are pre and post DAPM */
+#define SND_SOC_DAPM_PRE(wname, wevent) \
+{	.id = snd_soc_dapm_pre, .name = wname, .kcontrol_news = NULL, \
+	.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
+	.event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD}
+#define SND_SOC_DAPM_POST(wname, wevent) \
+{	.id = snd_soc_dapm_post, .name = wname, .kcontrol_news = NULL, \
+	.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
+	.event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD}
+
+/* stream domain */
+#define SND_SOC_DAPM_AIF_IN(wname, stname, wslot, wreg, wshift, winvert) \
+{	.id = snd_soc_dapm_aif_in, .name = wname, .sname = stname, \
+	.reg = wreg, .shift = wshift, .invert = winvert }
+#define SND_SOC_DAPM_AIF_IN_E(wname, stname, wslot, wreg, wshift, winvert, \
+			      wevent, wflags)				\
+{	.id = snd_soc_dapm_aif_in, .name = wname, .sname = stname, \
+	.reg = wreg, .shift = wshift, .invert = winvert, \
+	.event = wevent, .event_flags = wflags }
+#define SND_SOC_DAPM_AIF_OUT(wname, stname, wslot, wreg, wshift, winvert) \
+{	.id = snd_soc_dapm_aif_out, .name = wname, .sname = stname, \
+	.reg = wreg, .shift = wshift, .invert = winvert }
+#define SND_SOC_DAPM_AIF_OUT_E(wname, stname, wslot, wreg, wshift, winvert, \
+			     wevent, wflags)				\
+{	.id = snd_soc_dapm_aif_out, .name = wname, .sname = stname, \
+	.reg = wreg, .shift = wshift, .invert = winvert, \
+	.event = wevent, .event_flags = wflags }
+#define SND_SOC_DAPM_DAC(wname, stname, wreg, wshift, winvert) \
+{	.id = snd_soc_dapm_dac, .name = wname, .sname = stname, .reg = wreg, \
+	.shift = wshift, .invert = winvert}
+#define SND_SOC_DAPM_DAC_E(wname, stname, wreg, wshift, winvert, \
+			   wevent, wflags)				\
+{	.id = snd_soc_dapm_dac, .name = wname, .sname = stname, .reg = wreg, \
+	.shift = wshift, .invert = winvert, \
+	.event = wevent, .event_flags = wflags}
+#define SND_SOC_DAPM_ADC(wname, stname, wreg, wshift, winvert) \
+{	.id = snd_soc_dapm_adc, .name = wname, .sname = stname, .reg = wreg, \
+	.shift = wshift, .invert = winvert}
+#define SND_SOC_DAPM_ADC_E(wname, stname, wreg, wshift, winvert, \
+			   wevent, wflags)				\
+{	.id = snd_soc_dapm_adc, .name = wname, .sname = stname, .reg = wreg, \
+	.shift = wshift, .invert = winvert, \
+	.event = wevent, .event_flags = wflags}
+
+/* generic widgets */
+#define SND_SOC_DAPM_REG(wid, wname, wreg, wshift, wmask, won_val, woff_val) \
+{	.id = wid, .name = wname, .kcontrol_news = NULL, .num_kcontrols = 0, \
+	.reg = -((wreg) + 1), .shift = wshift, .mask = wmask, \
+	.on_val = won_val, .off_val = woff_val, .event = dapm_reg_event, \
+	.event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD}
+#define SND_SOC_DAPM_SUPPLY(wname, wreg, wshift, winvert, wevent, wflags) \
+{	.id = snd_soc_dapm_supply, .name = wname, .reg = wreg,	\
+	.shift = wshift, .invert = winvert, .event = wevent, \
+	.event_flags = wflags}
+#define SND_SOC_DAPM_REGULATOR_SUPPLY(wname, wdelay) \
+{	.id = snd_soc_dapm_regulator_supply, .name = wname, \
+	.reg = SND_SOC_NOPM, .shift = wdelay, .event = dapm_regulator_event, \
+	.event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD }
+
+/* dapm kcontrol types */
+#define SOC_DAPM_SINGLE(xname, reg, shift, max, invert) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+	.info = snd_soc_info_volsw, \
+	.get = snd_soc_dapm_get_volsw, .put = snd_soc_dapm_put_volsw, \
+	.private_value =  SOC_SINGLE_VALUE(reg, shift, max, invert) }
+#define SOC_DAPM_SINGLE_TLV(xname, reg, shift, max, invert, tlv_array) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+	.info = snd_soc_info_volsw, \
+	.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | SNDRV_CTL_ELEM_ACCESS_READWRITE,\
+	.tlv.p = (tlv_array), \
+	.get = snd_soc_dapm_get_volsw, .put = snd_soc_dapm_put_volsw, \
+	.private_value =  SOC_SINGLE_VALUE(reg, shift, max, invert) }
+#define SOC_DAPM_ENUM(xname, xenum) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+	.info = snd_soc_info_enum_double, \
+ 	.get = snd_soc_dapm_get_enum_double, \
+ 	.put = snd_soc_dapm_put_enum_double, \
+  	.private_value = (unsigned long)&xenum }
+#define SOC_DAPM_ENUM_VIRT(xname, xenum)		    \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+	.info = snd_soc_info_enum_double, \
+	.get = snd_soc_dapm_get_enum_virt, \
+	.put = snd_soc_dapm_put_enum_virt, \
+	.private_value = (unsigned long)&xenum }
+#define SOC_DAPM_ENUM_EXT(xname, xenum, xget, xput) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+	.info = snd_soc_info_enum_double, \
+	.get = xget, \
+	.put = xput, \
+	.private_value = (unsigned long)&xenum }
+#define SOC_DAPM_VALUE_ENUM(xname, xenum) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+	.info = snd_soc_info_enum_double, \
+	.get = snd_soc_dapm_get_value_enum_double, \
+	.put = snd_soc_dapm_put_value_enum_double, \
+	.private_value = (unsigned long)&xenum }
+#define SOC_DAPM_PIN_SWITCH(xname) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname " Switch", \
+	.info = snd_soc_dapm_info_pin_switch, \
+	.get = snd_soc_dapm_get_pin_switch, \
+	.put = snd_soc_dapm_put_pin_switch, \
+	.private_value = (unsigned long)xname }
+
+/* dapm stream operations */
+#define SND_SOC_DAPM_STREAM_NOP			0x0
+#define SND_SOC_DAPM_STREAM_START		0x1
+#define SND_SOC_DAPM_STREAM_STOP		0x2
+#define SND_SOC_DAPM_STREAM_SUSPEND		0x4
+#define SND_SOC_DAPM_STREAM_RESUME		0x8
+#define SND_SOC_DAPM_STREAM_PAUSE_PUSH	0x10
+#define SND_SOC_DAPM_STREAM_PAUSE_RELEASE	0x20
+
+/* dapm event types */
+#define SND_SOC_DAPM_PRE_PMU	0x1 	/* before widget power up */
+#define SND_SOC_DAPM_POST_PMU	0x2		/* after widget power up */
+#define SND_SOC_DAPM_PRE_PMD	0x4 	/* before widget power down */
+#define SND_SOC_DAPM_POST_PMD	0x8		/* after widget power down */
+#define SND_SOC_DAPM_PRE_REG	0x10	/* before audio path setup */
+#define SND_SOC_DAPM_POST_REG	0x20	/* after audio path setup */
+#define SND_SOC_DAPM_PRE_POST_PMD \
+				(SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD)
+
+/* convenience event type detection */
+#define SND_SOC_DAPM_EVENT_ON(e)	\
+	(e & (SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU))
+#define SND_SOC_DAPM_EVENT_OFF(e)	\
+	(e & (SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD))
+
+struct snd_soc_dapm_widget;
+enum snd_soc_dapm_type;
+struct snd_soc_dapm_path;
+struct snd_soc_dapm_pin;
+struct snd_soc_dapm_route;
+struct snd_soc_dapm_context;
+
+int dapm_reg_event(struct snd_soc_dapm_widget *w,
+		   struct snd_kcontrol *kcontrol, int event);
+int dapm_regulator_event(struct snd_soc_dapm_widget *w,
+			 struct snd_kcontrol *kcontrol, int event);
+
+/* dapm controls */
+int snd_soc_dapm_put_volsw(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol);
+int snd_soc_dapm_get_volsw(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol);
+int snd_soc_dapm_get_enum_double(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol);
+int snd_soc_dapm_put_enum_double(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol);
+int snd_soc_dapm_get_enum_virt(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol);
+int snd_soc_dapm_put_enum_virt(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol);
+int snd_soc_dapm_get_value_enum_double(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol);
+int snd_soc_dapm_put_value_enum_double(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol);
+int snd_soc_dapm_info_pin_switch(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_info *uinfo);
+int snd_soc_dapm_get_pin_switch(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *uncontrol);
+int snd_soc_dapm_put_pin_switch(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *uncontrol);
+int snd_soc_dapm_new_controls(struct snd_soc_dapm_context *dapm,
+	const struct snd_soc_dapm_widget *widget,
+	int num);
+int snd_soc_dapm_new_dai_widgets(struct snd_soc_dapm_context *dapm,
+				 struct snd_soc_dai *dai);
+int snd_soc_dapm_link_dai_widgets(struct snd_soc_card *card);
+
+/* dapm path setup */
+int snd_soc_dapm_new_widgets(struct snd_soc_dapm_context *dapm);
+void snd_soc_dapm_free(struct snd_soc_dapm_context *dapm);
+int snd_soc_dapm_add_routes(struct snd_soc_dapm_context *dapm,
+			    const struct snd_soc_dapm_route *route, int num);
+int snd_soc_dapm_weak_routes(struct snd_soc_dapm_context *dapm,
+			     const struct snd_soc_dapm_route *route, int num);
+
+/* dapm events */
+int snd_soc_dapm_stream_event(struct snd_soc_pcm_runtime *rtd, int stream,
+			      struct snd_soc_dai *dai, int event);
+void snd_soc_dapm_shutdown(struct snd_soc_card *card);
+
+/* external DAPM widget events */
+int snd_soc_dapm_mixer_update_power(struct snd_soc_dapm_widget *widget,
+		struct snd_kcontrol *kcontrol, int connect);
+int snd_soc_dapm_mux_update_power(struct snd_soc_dapm_widget *widget,
+				 struct snd_kcontrol *kcontrol, int mux, struct soc_enum *e);
+
+/* dapm sys fs - used by the core */
+int snd_soc_dapm_sys_add(struct device *dev);
+void snd_soc_dapm_debugfs_init(struct snd_soc_dapm_context *dapm,
+				struct dentry *parent);
+
+/* dapm audio pin control and status */
+int snd_soc_dapm_enable_pin(struct snd_soc_dapm_context *dapm,
+			    const char *pin);
+int snd_soc_dapm_disable_pin(struct snd_soc_dapm_context *dapm,
+			     const char *pin);
+int snd_soc_dapm_nc_pin(struct snd_soc_dapm_context *dapm, const char *pin);
+int snd_soc_dapm_get_pin_status(struct snd_soc_dapm_context *dapm,
+				const char *pin);
+int snd_soc_dapm_sync(struct snd_soc_dapm_context *dapm);
+int snd_soc_dapm_force_enable_pin(struct snd_soc_dapm_context *dapm,
+				  const char *pin);
+int snd_soc_dapm_ignore_suspend(struct snd_soc_dapm_context *dapm,
+				const char *pin);
+void snd_soc_dapm_auto_nc_codec_pins(struct snd_soc_codec *codec);
+
+/* Mostly internal - should not normally be used */
+void dapm_mark_dirty(struct snd_soc_dapm_widget *w, const char *reason);
+
+/* dapm widget types */
+enum snd_soc_dapm_type {
+	snd_soc_dapm_input = 0,		/* input pin */
+	snd_soc_dapm_output,		/* output pin */
+	snd_soc_dapm_mux,			/* selects 1 analog signal from many inputs */
+	snd_soc_dapm_virt_mux,			/* virtual version of snd_soc_dapm_mux */
+	snd_soc_dapm_value_mux,			/* selects 1 analog signal from many inputs */
+	snd_soc_dapm_mixer,			/* mixes several analog signals together */
+	snd_soc_dapm_mixer_named_ctl,		/* mixer with named controls */
+	snd_soc_dapm_pga,			/* programmable gain/attenuation (volume) */
+	snd_soc_dapm_out_drv,			/* output driver */
+	snd_soc_dapm_adc,			/* analog to digital converter */
+	snd_soc_dapm_dac,			/* digital to analog converter */
+	snd_soc_dapm_micbias,		/* microphone bias (power) */
+	snd_soc_dapm_mic,			/* microphone */
+	snd_soc_dapm_hp,			/* headphones */
+	snd_soc_dapm_spk,			/* speaker */
+	snd_soc_dapm_line,			/* line input/output */
+	snd_soc_dapm_switch,		/* analog switch */
+	snd_soc_dapm_vmid,			/* codec bias/vmid - to minimise pops */
+	snd_soc_dapm_pre,			/* machine specific pre widget - exec first */
+	snd_soc_dapm_post,			/* machine specific post widget - exec last */
+	snd_soc_dapm_supply,		/* power/clock supply */
+	snd_soc_dapm_regulator_supply,	/* external regulator */
+	snd_soc_dapm_aif_in,		/* audio interface input */
+	snd_soc_dapm_aif_out,		/* audio interface output */
+	snd_soc_dapm_siggen,		/* signal generator */
+	snd_soc_dapm_dai,		/* link to DAI structure */
+};
+
+enum snd_soc_dapm_subclass {
+	SND_SOC_DAPM_CLASS_INIT	= 0,
+	SND_SOC_DAPM_CLASS_PCM	= 1,
+};
+
+/*
+ * DAPM audio route definition.
+ *
+ * Defines an audio route originating at source via control and finishing
+ * at sink.
+ */
+struct snd_soc_dapm_route {
+	const char *sink;
+	const char *control;
+	const char *source;
+
+	/* Note: currently only supported for links where source is a supply */
+	int (*connected)(struct snd_soc_dapm_widget *source,
+			 struct snd_soc_dapm_widget *sink);
+};
+
+/* dapm audio path between two widgets */
+struct snd_soc_dapm_path {
+	const char *name;
+	const char *long_name;
+
+	/* source (input) and sink (output) widgets */
+	struct snd_soc_dapm_widget *source;
+	struct snd_soc_dapm_widget *sink;
+	struct snd_kcontrol *kcontrol;
+
+	/* status */
+	u32 connect:1;	/* source and sink widgets are connected */
+	u32 walked:1;	/* path has been walked */
+	u32 weak:1;	/* path ignored for power management */
+
+	int (*connected)(struct snd_soc_dapm_widget *source,
+			 struct snd_soc_dapm_widget *sink);
+
+	struct list_head list_source;
+	struct list_head list_sink;
+	struct list_head list;
+};
+
+/* dapm widget */
+struct snd_soc_dapm_widget {
+	enum snd_soc_dapm_type id;
+	const char *name;		/* widget name */
+	const char *sname;	/* stream name */
+	struct snd_soc_codec *codec;
+	struct snd_soc_platform *platform;
+	struct list_head list;
+	struct snd_soc_dapm_context *dapm;
+
+	void *priv;				/* widget specific data */
+
+	/* dapm control */
+	short reg;						/* negative reg = no direct dapm */
+	unsigned char shift;			/* bits to shift */
+	unsigned int saved_value;		/* widget saved value */
+	unsigned int value;				/* widget current value */
+	unsigned int mask;			/* non-shifted mask */
+	unsigned int on_val;			/* on state value */
+	unsigned int off_val;			/* off state value */
+	unsigned char power:1;			/* block power status */
+	unsigned char invert:1;			/* invert the power bit */
+	unsigned char active:1;			/* active stream on DAC, ADC's */
+	unsigned char connected:1;		/* connected codec pin */
+	unsigned char new:1;			/* cnew complete */
+	unsigned char ext:1;			/* has external widgets */
+	unsigned char force:1;			/* force state */
+	unsigned char ignore_suspend:1;         /* kept enabled over suspend */
+	unsigned char new_power:1;		/* power from this run */
+	unsigned char power_checked:1;		/* power checked this run */
+	int subseq;				/* sort within widget type */
+
+	int (*power_check)(struct snd_soc_dapm_widget *w);
+
+	/* external events */
+	unsigned short event_flags;		/* flags to specify event types */
+	int (*event)(struct snd_soc_dapm_widget*, struct snd_kcontrol *, int);
+
+	/* kcontrols that relate to this widget */
+	int num_kcontrols;
+	const struct snd_kcontrol_new *kcontrol_news;
+	struct snd_kcontrol **kcontrols;
+
+	/* widget input and outputs */
+	struct list_head sources;
+	struct list_head sinks;
+
+	/* used during DAPM updates */
+	struct list_head power_list;
+	struct list_head dirty;
+	int inputs;
+	int outputs;
+};
+
+struct snd_soc_dapm_update {
+	struct snd_soc_dapm_widget *widget;
+	struct snd_kcontrol *kcontrol;
+	int reg;
+	int mask;
+	int val;
+};
+
+/* DAPM context */
+struct snd_soc_dapm_context {
+	int n_widgets; /* number of widgets in this context */
+	enum snd_soc_bias_level bias_level;
+	enum snd_soc_bias_level suspend_bias_level;
+	struct delayed_work delayed_work;
+	unsigned int idle_bias_off:1; /* Use BIAS_OFF instead of STANDBY */
+
+	struct snd_soc_dapm_update *update;
+
+	void (*seq_notifier)(struct snd_soc_dapm_context *,
+			     enum snd_soc_dapm_type, int);
+
+	struct device *dev; /* from parent - for debug */
+	struct snd_soc_codec *codec; /* parent codec */
+	struct snd_soc_platform *platform; /* parent platform */
+	struct snd_soc_card *card; /* parent card */
+
+	/* used during DAPM updates */
+	enum snd_soc_bias_level target_bias_level;
+	struct list_head list;
+
+	int (*stream_event)(struct snd_soc_dapm_context *dapm, int event);
+
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *debugfs_dapm;
+#endif
+};
+
+/* A list of widgets associated with an object, typically a snd_kcontrol */
+struct snd_soc_dapm_widget_list {
+	int num_widgets;
+	struct snd_soc_dapm_widget *widgets[0];
+};
+
+struct snd_soc_dapm_stats {
+	int power_checks;
+	int path_checks;
+	int neighbour_checks;
+};
+
+#endif
diff --git a/include/sound/soc.h b/include/sound/soc.h
new file mode 100644
index 00000000..66fd9bc9
--- /dev/null
+++ b/include/sound/soc.h
@@ -0,0 +1,1029 @@
+/*
+ * linux/sound/soc.h -- ALSA SoC Layer
+ *
+ * Author:		Liam Girdwood
+ * Created:		Aug 11th 2005
+ * Copyright:	Wolfson Microelectronics. PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_SOC_H
+#define __LINUX_SND_SOC_H
+
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/notifier.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/regmap.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/control.h>
+#include <sound/ac97_codec.h>
+
+/*
+ * Convenience kcontrol builders
+ */
+#define SOC_DOUBLE_VALUE(xreg, shift_left, shift_right, xmax, xinvert) \
+	((unsigned long)&(struct soc_mixer_control) \
+	{.reg = xreg, .rreg = xreg, .shift = shift_left, \
+	.rshift = shift_right, .max = xmax, .platform_max = xmax, \
+	.invert = xinvert})
+#define SOC_SINGLE_VALUE(xreg, xshift, xmax, xinvert) \
+	SOC_DOUBLE_VALUE(xreg, xshift, xshift, xmax, xinvert)
+#define SOC_SINGLE_VALUE_EXT(xreg, xmax, xinvert) \
+	((unsigned long)&(struct soc_mixer_control) \
+	{.reg = xreg, .max = xmax, .platform_max = xmax, .invert = xinvert})
+#define SOC_DOUBLE_R_VALUE(xlreg, xrreg, xshift, xmax, xinvert) \
+	((unsigned long)&(struct soc_mixer_control) \
+	{.reg = xlreg, .rreg = xrreg, .shift = xshift, .rshift = xshift, \
+	.max = xmax, .platform_max = xmax, .invert = xinvert})
+#define SOC_SINGLE(xname, reg, shift, max, invert) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+	.info = snd_soc_info_volsw, .get = snd_soc_get_volsw,\
+	.put = snd_soc_put_volsw, \
+	.private_value =  SOC_SINGLE_VALUE(reg, shift, max, invert) }
+#define SOC_SINGLE_TLV(xname, reg, shift, max, invert, tlv_array) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+	.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
+		 SNDRV_CTL_ELEM_ACCESS_READWRITE,\
+	.tlv.p = (tlv_array), \
+	.info = snd_soc_info_volsw, .get = snd_soc_get_volsw,\
+	.put = snd_soc_put_volsw, \
+	.private_value =  SOC_SINGLE_VALUE(reg, shift, max, invert) }
+#define SOC_DOUBLE(xname, reg, shift_left, shift_right, max, invert) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
+	.info = snd_soc_info_volsw, .get = snd_soc_get_volsw, \
+	.put = snd_soc_put_volsw, \
+	.private_value = SOC_DOUBLE_VALUE(reg, shift_left, shift_right, \
+					  max, invert) }
+#define SOC_DOUBLE_R(xname, reg_left, reg_right, xshift, xmax, xinvert) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
+	.info = snd_soc_info_volsw, \
+	.get = snd_soc_get_volsw, .put = snd_soc_put_volsw, \
+	.private_value = SOC_DOUBLE_R_VALUE(reg_left, reg_right, xshift, \
+					    xmax, xinvert) }
+#define SOC_DOUBLE_TLV(xname, reg, shift_left, shift_right, max, invert, tlv_array) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
+	.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
+		 SNDRV_CTL_ELEM_ACCESS_READWRITE,\
+	.tlv.p = (tlv_array), \
+	.info = snd_soc_info_volsw, .get = snd_soc_get_volsw, \
+	.put = snd_soc_put_volsw, \
+	.private_value = SOC_DOUBLE_VALUE(reg, shift_left, shift_right, \
+					  max, invert) }
+#define SOC_DOUBLE_R_TLV(xname, reg_left, reg_right, xshift, xmax, xinvert, tlv_array) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
+	.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
+		 SNDRV_CTL_ELEM_ACCESS_READWRITE,\
+	.tlv.p = (tlv_array), \
+	.info = snd_soc_info_volsw, \
+	.get = snd_soc_get_volsw, .put = snd_soc_put_volsw, \
+	.private_value = SOC_DOUBLE_R_VALUE(reg_left, reg_right, xshift, \
+					    xmax, xinvert) }
+#define SOC_DOUBLE_S8_TLV(xname, xreg, xmin, xmax, tlv_array) \
+{	.iface  = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
+	.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
+		  SNDRV_CTL_ELEM_ACCESS_READWRITE, \
+	.tlv.p  = (tlv_array), \
+	.info   = snd_soc_info_volsw_s8, .get = snd_soc_get_volsw_s8, \
+	.put    = snd_soc_put_volsw_s8, \
+	.private_value = (unsigned long)&(struct soc_mixer_control) \
+		{.reg = xreg, .min = xmin, .max = xmax, \
+		 .platform_max = xmax} }
+#define SOC_ENUM_DOUBLE(xreg, xshift_l, xshift_r, xmax, xtexts) \
+{	.reg = xreg, .shift_l = xshift_l, .shift_r = xshift_r, \
+	.max = xmax, .texts = xtexts }
+#define SOC_ENUM_SINGLE(xreg, xshift, xmax, xtexts) \
+	SOC_ENUM_DOUBLE(xreg, xshift, xshift, xmax, xtexts)
+#define SOC_ENUM_SINGLE_EXT(xmax, xtexts) \
+{	.max = xmax, .texts = xtexts }
+#define SOC_VALUE_ENUM_DOUBLE(xreg, xshift_l, xshift_r, xmask, xmax, xtexts, xvalues) \
+{	.reg = xreg, .shift_l = xshift_l, .shift_r = xshift_r, \
+	.mask = xmask, .max = xmax, .texts = xtexts, .values = xvalues}
+#define SOC_VALUE_ENUM_SINGLE(xreg, xshift, xmask, xmax, xtexts, xvalues) \
+	SOC_VALUE_ENUM_DOUBLE(xreg, xshift, xshift, xmask, xmax, xtexts, xvalues)
+#define SOC_ENUM(xname, xenum) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname,\
+	.info = snd_soc_info_enum_double, \
+	.get = snd_soc_get_enum_double, .put = snd_soc_put_enum_double, \
+	.private_value = (unsigned long)&xenum }
+#define SOC_VALUE_ENUM(xname, xenum) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname,\
+	.info = snd_soc_info_enum_double, \
+	.get = snd_soc_get_value_enum_double, \
+	.put = snd_soc_put_value_enum_double, \
+	.private_value = (unsigned long)&xenum }
+#define SOC_SINGLE_EXT(xname, xreg, xshift, xmax, xinvert,\
+	 xhandler_get, xhandler_put) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+	.info = snd_soc_info_volsw, \
+	.get = xhandler_get, .put = xhandler_put, \
+	.private_value = SOC_SINGLE_VALUE(xreg, xshift, xmax, xinvert) }
+#define SOC_DOUBLE_EXT(xname, reg, shift_left, shift_right, max, invert,\
+	 xhandler_get, xhandler_put) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
+	.info = snd_soc_info_volsw, \
+	.get = xhandler_get, .put = xhandler_put, \
+	.private_value = \
+		SOC_DOUBLE_VALUE(reg, shift_left, shift_right, max, invert) }
+#define SOC_SINGLE_EXT_TLV(xname, xreg, xshift, xmax, xinvert,\
+	 xhandler_get, xhandler_put, tlv_array) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+	.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
+		 SNDRV_CTL_ELEM_ACCESS_READWRITE,\
+	.tlv.p = (tlv_array), \
+	.info = snd_soc_info_volsw, \
+	.get = xhandler_get, .put = xhandler_put, \
+	.private_value = SOC_SINGLE_VALUE(xreg, xshift, xmax, xinvert) }
+#define SOC_DOUBLE_EXT_TLV(xname, xreg, shift_left, shift_right, xmax, xinvert,\
+	 xhandler_get, xhandler_put, tlv_array) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
+	.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
+		 SNDRV_CTL_ELEM_ACCESS_READWRITE, \
+	.tlv.p = (tlv_array), \
+	.info = snd_soc_info_volsw, \
+	.get = xhandler_get, .put = xhandler_put, \
+	.private_value = SOC_DOUBLE_VALUE(xreg, shift_left, shift_right, \
+					  xmax, xinvert) }
+#define SOC_DOUBLE_R_EXT_TLV(xname, reg_left, reg_right, xshift, xmax, xinvert,\
+	 xhandler_get, xhandler_put, tlv_array) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
+	.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
+		 SNDRV_CTL_ELEM_ACCESS_READWRITE, \
+	.tlv.p = (tlv_array), \
+	.info = snd_soc_info_volsw, \
+	.get = xhandler_get, .put = xhandler_put, \
+	.private_value = SOC_DOUBLE_R_VALUE(reg_left, reg_right, xshift, \
+					    xmax, xinvert) }
+#define SOC_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+	.info = snd_soc_info_bool_ext, \
+	.get = xhandler_get, .put = xhandler_put, \
+	.private_value = xdata }
+#define SOC_ENUM_EXT(xname, xenum, xhandler_get, xhandler_put) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+	.info = snd_soc_info_enum_ext, \
+	.get = xhandler_get, .put = xhandler_put, \
+	.private_value = (unsigned long)&xenum }
+
+#define SOC_DOUBLE_R_SX_TLV(xname, xreg_left, xreg_right, xshift,\
+		xmin, xmax, tlv_array) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
+	.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
+		  SNDRV_CTL_ELEM_ACCESS_READWRITE, \
+	.tlv.p = (tlv_array), \
+	.info = snd_soc_info_volsw_2r_sx, \
+	.get = snd_soc_get_volsw_2r_sx, \
+	.put = snd_soc_put_volsw_2r_sx, \
+	.private_value = (unsigned long)&(struct soc_mixer_control) \
+		{.reg = xreg_left, \
+		 .rreg = xreg_right, .shift = xshift, \
+		 .min = xmin, .max = xmax} }
+
+#define SND_SOC_BYTES(xname, xbase, xregs)		      \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname,   \
+	.info = snd_soc_bytes_info, .get = snd_soc_bytes_get, \
+	.put = snd_soc_bytes_put, .private_value =	      \
+		((unsigned long)&(struct soc_bytes)           \
+		{.base = xbase, .num_regs = xregs }) }
+
+#define SND_SOC_BYTES_MASK(xname, xbase, xregs, xmask)	      \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname,   \
+	.info = snd_soc_bytes_info, .get = snd_soc_bytes_get, \
+	.put = snd_soc_bytes_put, .private_value =	      \
+		((unsigned long)&(struct soc_bytes)           \
+		{.base = xbase, .num_regs = xregs,	      \
+		 .mask = xmask }) }
+
+/*
+ * Simplified versions of above macros, declaring a struct and calculating
+ * ARRAY_SIZE internally
+ */
+#define SOC_ENUM_DOUBLE_DECL(name, xreg, xshift_l, xshift_r, xtexts) \
+	struct soc_enum name = SOC_ENUM_DOUBLE(xreg, xshift_l, xshift_r, \
+						ARRAY_SIZE(xtexts), xtexts)
+#define SOC_ENUM_SINGLE_DECL(name, xreg, xshift, xtexts) \
+	SOC_ENUM_DOUBLE_DECL(name, xreg, xshift, xshift, xtexts)
+#define SOC_ENUM_SINGLE_EXT_DECL(name, xtexts) \
+	struct soc_enum name = SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(xtexts), xtexts)
+#define SOC_VALUE_ENUM_DOUBLE_DECL(name, xreg, xshift_l, xshift_r, xmask, xtexts, xvalues) \
+	struct soc_enum name = SOC_VALUE_ENUM_DOUBLE(xreg, xshift_l, xshift_r, xmask, \
+							ARRAY_SIZE(xtexts), xtexts, xvalues)
+#define SOC_VALUE_ENUM_SINGLE_DECL(name, xreg, xshift, xmask, xtexts, xvalues) \
+	SOC_VALUE_ENUM_DOUBLE_DECL(name, xreg, xshift, xshift, xmask, xtexts, xvalues)
+
+/*
+ * Component probe and remove ordering levels for components with runtime
+ * dependencies.
+ */
+#define SND_SOC_COMP_ORDER_FIRST		-2
+#define SND_SOC_COMP_ORDER_EARLY		-1
+#define SND_SOC_COMP_ORDER_NORMAL		0
+#define SND_SOC_COMP_ORDER_LATE		1
+#define SND_SOC_COMP_ORDER_LAST		2
+
+/*
+ * Bias levels
+ *
+ * @ON:      Bias is fully on for audio playback and capture operations.
+ * @PREPARE: Prepare for audio operations. Called before DAPM switching for
+ *           stream start and stop operations.
+ * @STANDBY: Low power standby state when no playback/capture operations are
+ *           in progress. NOTE: The transition time between STANDBY and ON
+ *           should be as fast as possible and no longer than 10ms.
+ * @OFF:     Power Off. No restrictions on transition times.
+ */
+enum snd_soc_bias_level {
+	SND_SOC_BIAS_OFF = 0,
+	SND_SOC_BIAS_STANDBY = 1,
+	SND_SOC_BIAS_PREPARE = 2,
+	SND_SOC_BIAS_ON = 3,
+};
+
+struct device_node;
+struct snd_jack;
+struct snd_soc_card;
+struct snd_soc_pcm_stream;
+struct snd_soc_ops;
+struct snd_soc_pcm_runtime;
+struct snd_soc_dai;
+struct snd_soc_dai_driver;
+struct snd_soc_platform;
+struct snd_soc_dai_link;
+struct snd_soc_platform_driver;
+struct snd_soc_codec;
+struct snd_soc_codec_driver;
+struct soc_enum;
+struct snd_soc_jack;
+struct snd_soc_jack_zone;
+struct snd_soc_jack_pin;
+struct snd_soc_cache_ops;
+#include <sound/soc-dapm.h>
+
+#ifdef CONFIG_GPIOLIB
+struct snd_soc_jack_gpio;
+#endif
+
+typedef int (*hw_write_t)(void *,const char* ,int);
+
+extern struct snd_ac97_bus_ops soc_ac97_ops;
+
+enum snd_soc_control_type {
+	SND_SOC_I2C = 1,
+	SND_SOC_SPI,
+	SND_SOC_REGMAP,
+};
+
+enum snd_soc_compress_type {
+	SND_SOC_FLAT_COMPRESSION = 1,
+};
+
+enum snd_soc_pcm_subclass {
+	SND_SOC_PCM_CLASS_PCM	= 0,
+	SND_SOC_PCM_CLASS_BE	= 1,
+};
+
+enum snd_soc_card_subclass {
+	SND_SOC_CARD_CLASS_INIT	= 0,
+	SND_SOC_CARD_CLASS_PCM	= 1,
+};
+
+int snd_soc_codec_set_sysclk(struct snd_soc_codec *codec, int clk_id,
+			     int source, unsigned int freq, int dir);
+int snd_soc_codec_set_pll(struct snd_soc_codec *codec, int pll_id, int source,
+			  unsigned int freq_in, unsigned int freq_out);
+
+int snd_soc_register_card(struct snd_soc_card *card);
+int snd_soc_unregister_card(struct snd_soc_card *card);
+int snd_soc_suspend(struct device *dev);
+int snd_soc_resume(struct device *dev);
+int snd_soc_poweroff(struct device *dev);
+int snd_soc_register_platform(struct device *dev,
+		struct snd_soc_platform_driver *platform_drv);
+void snd_soc_unregister_platform(struct device *dev);
+int snd_soc_register_codec(struct device *dev,
+		const struct snd_soc_codec_driver *codec_drv,
+		struct snd_soc_dai_driver *dai_drv, int num_dai);
+void snd_soc_unregister_codec(struct device *dev);
+int snd_soc_codec_volatile_register(struct snd_soc_codec *codec,
+				    unsigned int reg);
+int snd_soc_codec_readable_register(struct snd_soc_codec *codec,
+				    unsigned int reg);
+int snd_soc_codec_writable_register(struct snd_soc_codec *codec,
+				    unsigned int reg);
+int snd_soc_codec_set_cache_io(struct snd_soc_codec *codec,
+			       int addr_bits, int data_bits,
+			       enum snd_soc_control_type control);
+int snd_soc_cache_sync(struct snd_soc_codec *codec);
+int snd_soc_cache_init(struct snd_soc_codec *codec);
+int snd_soc_cache_exit(struct snd_soc_codec *codec);
+int snd_soc_cache_write(struct snd_soc_codec *codec,
+			unsigned int reg, unsigned int value);
+int snd_soc_cache_read(struct snd_soc_codec *codec,
+		       unsigned int reg, unsigned int *value);
+int snd_soc_default_volatile_register(struct snd_soc_codec *codec,
+				      unsigned int reg);
+int snd_soc_default_readable_register(struct snd_soc_codec *codec,
+				      unsigned int reg);
+int snd_soc_default_writable_register(struct snd_soc_codec *codec,
+				      unsigned int reg);
+int snd_soc_platform_read(struct snd_soc_platform *platform,
+					unsigned int reg);
+int snd_soc_platform_write(struct snd_soc_platform *platform,
+					unsigned int reg, unsigned int val);
+int soc_new_pcm(struct snd_soc_pcm_runtime *rtd, int num);
+
+/* Utility functions to get clock rates from various things */
+int snd_soc_calc_frame_size(int sample_size, int channels, int tdm_slots);
+int snd_soc_params_to_frame_size(struct snd_pcm_hw_params *params);
+int snd_soc_calc_bclk(int fs, int sample_size, int channels, int tdm_slots);
+int snd_soc_params_to_bclk(struct snd_pcm_hw_params *parms);
+
+/* set runtime hw params */
+int snd_soc_set_runtime_hwparams(struct snd_pcm_substream *substream,
+	const struct snd_pcm_hardware *hw);
+
+/* Jack reporting */
+int snd_soc_jack_new(struct snd_soc_codec *codec, const char *id, int type,
+		     struct snd_soc_jack *jack);
+void snd_soc_jack_report(struct snd_soc_jack *jack, int status, int mask);
+int snd_soc_jack_add_pins(struct snd_soc_jack *jack, int count,
+			  struct snd_soc_jack_pin *pins);
+void snd_soc_jack_notifier_register(struct snd_soc_jack *jack,
+				    struct notifier_block *nb);
+void snd_soc_jack_notifier_unregister(struct snd_soc_jack *jack,
+				      struct notifier_block *nb);
+int snd_soc_jack_add_zones(struct snd_soc_jack *jack, int count,
+			  struct snd_soc_jack_zone *zones);
+int snd_soc_jack_get_type(struct snd_soc_jack *jack, int micbias_voltage);
+#ifdef CONFIG_GPIOLIB
+int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count,
+			struct snd_soc_jack_gpio *gpios);
+void snd_soc_jack_free_gpios(struct snd_soc_jack *jack, int count,
+			struct snd_soc_jack_gpio *gpios);
+#endif
+
+/* codec register bit access */
+int snd_soc_update_bits(struct snd_soc_codec *codec, unsigned short reg,
+				unsigned int mask, unsigned int value);
+int snd_soc_update_bits_locked(struct snd_soc_codec *codec,
+			       unsigned short reg, unsigned int mask,
+			       unsigned int value);
+int snd_soc_test_bits(struct snd_soc_codec *codec, unsigned short reg,
+				unsigned int mask, unsigned int value);
+
+int snd_soc_new_ac97_codec(struct snd_soc_codec *codec,
+	struct snd_ac97_bus_ops *ops, int num);
+void snd_soc_free_ac97_codec(struct snd_soc_codec *codec);
+
+/*
+ *Controls
+ */
+struct snd_kcontrol *snd_soc_cnew(const struct snd_kcontrol_new *_template,
+				  void *data, const char *long_name,
+				  const char *prefix);
+int snd_soc_add_codec_controls(struct snd_soc_codec *codec,
+	const struct snd_kcontrol_new *controls, int num_controls);
+int snd_soc_add_platform_controls(struct snd_soc_platform *platform,
+	const struct snd_kcontrol_new *controls, int num_controls);
+int snd_soc_add_card_controls(struct snd_soc_card *soc_card,
+	const struct snd_kcontrol_new *controls, int num_controls);
+int snd_soc_add_dai_controls(struct snd_soc_dai *dai,
+	const struct snd_kcontrol_new *controls, int num_controls);
+int snd_soc_info_enum_double(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_info *uinfo);
+int snd_soc_info_enum_ext(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_info *uinfo);
+int snd_soc_get_enum_double(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol);
+int snd_soc_put_enum_double(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol);
+int snd_soc_get_value_enum_double(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol);
+int snd_soc_put_value_enum_double(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol);
+int snd_soc_info_volsw(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_info *uinfo);
+int snd_soc_info_volsw_ext(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_info *uinfo);
+#define snd_soc_info_bool_ext		snd_ctl_boolean_mono_info
+int snd_soc_get_volsw(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol);
+int snd_soc_put_volsw(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol);
+#define snd_soc_get_volsw_2r snd_soc_get_volsw
+#define snd_soc_put_volsw_2r snd_soc_put_volsw
+int snd_soc_info_volsw_s8(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_info *uinfo);
+int snd_soc_get_volsw_s8(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol);
+int snd_soc_put_volsw_s8(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol);
+int snd_soc_limit_volume(struct snd_soc_codec *codec,
+	const char *name, int max);
+int snd_soc_info_volsw_2r_sx(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_info *uinfo);
+int snd_soc_get_volsw_2r_sx(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol);
+int snd_soc_put_volsw_2r_sx(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol);
+int snd_soc_bytes_info(struct snd_kcontrol *kcontrol,
+		       struct snd_ctl_elem_info *uinfo);
+int snd_soc_bytes_get(struct snd_kcontrol *kcontrol,
+		      struct snd_ctl_elem_value *ucontrol);
+int snd_soc_bytes_put(struct snd_kcontrol *kcontrol,
+		      struct snd_ctl_elem_value *ucontrol);
+
+
+/**
+ * struct snd_soc_reg_access - Describes whether a given register is
+ * readable, writable or volatile.
+ *
+ * @reg: the register number
+ * @read: whether this register is readable
+ * @write: whether this register is writable
+ * @vol: whether this register is volatile
+ */
+struct snd_soc_reg_access {
+	u16 reg;
+	u16 read;
+	u16 write;
+	u16 vol;
+};
+
+/**
+ * struct snd_soc_jack_pin - Describes a pin to update based on jack detection
+ *
+ * @pin:    name of the pin to update
+ * @mask:   bits to check for in reported jack status
+ * @invert: if non-zero then pin is enabled when status is not reported
+ */
+struct snd_soc_jack_pin {
+	struct list_head list;
+	const char *pin;
+	int mask;
+	bool invert;
+};
+
+/**
+ * struct snd_soc_jack_zone - Describes voltage zones of jack detection
+ *
+ * @min_mv: start voltage in mv
+ * @max_mv: end voltage in mv
+ * @jack_type: type of jack that is expected for this voltage
+ * @debounce_time: debounce_time for jack, codec driver should wait for this
+ *		duration before reading the adc for voltages
+ * @:list: list container
+ */
+struct snd_soc_jack_zone {
+	unsigned int min_mv;
+	unsigned int max_mv;
+	unsigned int jack_type;
+	unsigned int debounce_time;
+	struct list_head list;
+};
+
+/**
+ * struct snd_soc_jack_gpio - Describes a gpio pin for jack detection
+ *
+ * @gpio:         gpio number
+ * @name:         gpio name
+ * @report:       value to report when jack detected
+ * @invert:       report presence in low state
+ * @debouce_time: debouce time in ms
+ * @wake:	  enable as wake source
+ * @jack_status_check: callback function which overrides the detection
+ *		       to provide more complex checks (eg, reading an
+ *		       ADC).
+ */
+#ifdef CONFIG_GPIOLIB
+struct snd_soc_jack_gpio {
+	unsigned int gpio;
+	const char *name;
+	int report;
+	int invert;
+	int debounce_time;
+	bool wake;
+
+	struct snd_soc_jack *jack;
+	struct delayed_work work;
+
+	int (*jack_status_check)(void);
+};
+#endif
+
+struct snd_soc_jack {
+	struct snd_jack *jack;
+	struct snd_soc_codec *codec;
+	struct list_head pins;
+	int status;
+	struct blocking_notifier_head notifier;
+	struct list_head jack_zones;
+};
+
+/* SoC PCM stream information */
+struct snd_soc_pcm_stream {
+	const char *stream_name;
+	u64 formats;			/* SNDRV_PCM_FMTBIT_* */
+	unsigned int rates;		/* SNDRV_PCM_RATE_* */
+	unsigned int rate_min;		/* min rate */
+	unsigned int rate_max;		/* max rate */
+	unsigned int channels_min;	/* min channels */
+	unsigned int channels_max;	/* max channels */
+	unsigned int sig_bits;		/* number of bits of content */
+};
+
+/* SoC audio ops */
+struct snd_soc_ops {
+	int (*startup)(struct snd_pcm_substream *);
+	void (*shutdown)(struct snd_pcm_substream *);
+	int (*hw_params)(struct snd_pcm_substream *, struct snd_pcm_hw_params *);
+	int (*hw_free)(struct snd_pcm_substream *);
+	int (*prepare)(struct snd_pcm_substream *);
+	int (*trigger)(struct snd_pcm_substream *, int);
+};
+
+/* SoC cache ops */
+struct snd_soc_cache_ops {
+	const char *name;
+	enum snd_soc_compress_type id;
+	int (*init)(struct snd_soc_codec *codec);
+	int (*exit)(struct snd_soc_codec *codec);
+	int (*read)(struct snd_soc_codec *codec, unsigned int reg,
+		unsigned int *value);
+	int (*write)(struct snd_soc_codec *codec, unsigned int reg,
+		unsigned int value);
+	int (*sync)(struct snd_soc_codec *codec);
+};
+
+/* SoC Audio Codec device */
+struct snd_soc_codec {
+	const char *name;
+	const char *name_prefix;
+	int id;
+	struct device *dev;
+	const struct snd_soc_codec_driver *driver;
+
+	struct mutex mutex;
+	struct snd_soc_card *card;
+	struct list_head list;
+	struct list_head card_list;
+	int num_dai;
+	enum snd_soc_compress_type compress_type;
+	size_t reg_size;	/* reg_cache_size * reg_word_size */
+	int (*volatile_register)(struct snd_soc_codec *, unsigned int);
+	int (*readable_register)(struct snd_soc_codec *, unsigned int);
+	int (*writable_register)(struct snd_soc_codec *, unsigned int);
+
+	/* runtime */
+	struct snd_ac97 *ac97;  /* for ad-hoc ac97 devices */
+	unsigned int active;
+	unsigned int cache_bypass:1; /* Suppress access to the cache */
+	unsigned int suspended:1; /* Codec is in suspend PM state */
+	unsigned int probed:1; /* Codec has been probed */
+	unsigned int ac97_registered:1; /* Codec has been AC97 registered */
+	unsigned int ac97_created:1; /* Codec has been created by SoC */
+	unsigned int sysfs_registered:1; /* codec has been sysfs registered */
+	unsigned int cache_init:1; /* codec cache has been initialized */
+	unsigned int using_regmap:1; /* using regmap access */
+	u32 cache_only;  /* Suppress writes to hardware */
+	u32 cache_sync; /* Cache needs to be synced to hardware */
+
+	/* codec IO */
+	void *control_data; /* codec control (i2c/3wire) data */
+	enum snd_soc_control_type control_type;
+	hw_write_t hw_write;
+	unsigned int (*hw_read)(struct snd_soc_codec *, unsigned int);
+	unsigned int (*read)(struct snd_soc_codec *, unsigned int);
+	int (*write)(struct snd_soc_codec *, unsigned int, unsigned int);
+	int (*bulk_write_raw)(struct snd_soc_codec *, unsigned int, const void *, size_t);
+	void *reg_cache;
+	const void *reg_def_copy;
+	const struct snd_soc_cache_ops *cache_ops;
+	struct mutex cache_rw_mutex;
+	int val_bytes;
+
+	/* dapm */
+	struct snd_soc_dapm_context dapm;
+	unsigned int ignore_pmdown_time:1; /* pmdown_time is ignored at stop */
+
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *debugfs_codec_root;
+	struct dentry *debugfs_reg;
+	struct dentry *debugfs_dapm;
+#endif
+};
+
+/* codec driver */
+struct snd_soc_codec_driver {
+
+	/* driver ops */
+	int (*probe)(struct snd_soc_codec *);
+	int (*remove)(struct snd_soc_codec *);
+	int (*suspend)(struct snd_soc_codec *);
+	int (*resume)(struct snd_soc_codec *);
+
+	/* Default control and setup, added after probe() is run */
+	const struct snd_kcontrol_new *controls;
+	int num_controls;
+	const struct snd_soc_dapm_widget *dapm_widgets;
+	int num_dapm_widgets;
+	const struct snd_soc_dapm_route *dapm_routes;
+	int num_dapm_routes;
+
+	/* codec wide operations */
+	int (*set_sysclk)(struct snd_soc_codec *codec,
+			  int clk_id, int source, unsigned int freq, int dir);
+	int (*set_pll)(struct snd_soc_codec *codec, int pll_id, int source,
+		unsigned int freq_in, unsigned int freq_out);
+
+	/* codec IO */
+	unsigned int (*read)(struct snd_soc_codec *, unsigned int);
+	int (*write)(struct snd_soc_codec *, unsigned int, unsigned int);
+	int (*display_register)(struct snd_soc_codec *, char *,
+				size_t, unsigned int);
+	int (*volatile_register)(struct snd_soc_codec *, unsigned int);
+	int (*readable_register)(struct snd_soc_codec *, unsigned int);
+	int (*writable_register)(struct snd_soc_codec *, unsigned int);
+	unsigned int reg_cache_size;
+	short reg_cache_step;
+	short reg_word_size;
+	const void *reg_cache_default;
+	short reg_access_size;
+	const struct snd_soc_reg_access *reg_access_default;
+	enum snd_soc_compress_type compress_type;
+
+	/* codec bias level */
+	int (*set_bias_level)(struct snd_soc_codec *,
+			      enum snd_soc_bias_level level);
+	bool idle_bias_off;
+
+	void (*seq_notifier)(struct snd_soc_dapm_context *,
+			     enum snd_soc_dapm_type, int);
+
+	/* codec stream completion event */
+	int (*stream_event)(struct snd_soc_dapm_context *dapm, int event);
+
+	bool ignore_pmdown_time;  /* Doesn't benefit from pmdown delay */
+
+	/* probe ordering - for components with runtime dependencies */
+	int probe_order;
+	int remove_order;
+};
+
+/* SoC platform interface */
+struct snd_soc_platform_driver {
+
+	int (*probe)(struct snd_soc_platform *);
+	int (*remove)(struct snd_soc_platform *);
+	int (*suspend)(struct snd_soc_dai *dai);
+	int (*resume)(struct snd_soc_dai *dai);
+
+	/* pcm creation and destruction */
+	int (*pcm_new)(struct snd_soc_pcm_runtime *);
+	void (*pcm_free)(struct snd_pcm *);
+
+	/* Default control and setup, added after probe() is run */
+	const struct snd_kcontrol_new *controls;
+	int num_controls;
+	const struct snd_soc_dapm_widget *dapm_widgets;
+	int num_dapm_widgets;
+	const struct snd_soc_dapm_route *dapm_routes;
+	int num_dapm_routes;
+
+	/*
+	 * For platform caused delay reporting.
+	 * Optional.
+	 */
+	snd_pcm_sframes_t (*delay)(struct snd_pcm_substream *,
+		struct snd_soc_dai *);
+
+	/* platform stream ops */
+	struct snd_pcm_ops *ops;
+
+	/* platform stream completion event */
+	int (*stream_event)(struct snd_soc_dapm_context *dapm, int event);
+
+	/* probe ordering - for components with runtime dependencies */
+	int probe_order;
+	int remove_order;
+
+	/* platform IO - used for platform DAPM */
+	unsigned int (*read)(struct snd_soc_platform *, unsigned int);
+	int (*write)(struct snd_soc_platform *, unsigned int, unsigned int);
+};
+
+struct snd_soc_platform {
+	const char *name;
+	int id;
+	struct device *dev;
+	struct snd_soc_platform_driver *driver;
+	struct mutex mutex;
+
+	unsigned int suspended:1; /* platform is suspended */
+	unsigned int probed:1;
+
+	struct snd_soc_card *card;
+	struct list_head list;
+	struct list_head card_list;
+
+	struct snd_soc_dapm_context dapm;
+
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *debugfs_platform_root;
+	struct dentry *debugfs_dapm;
+#endif
+};
+
+struct snd_soc_dai_link {
+	/* config - must be set by machine driver */
+	const char *name;			/* Codec name */
+	const char *stream_name;		/* Stream name */
+	const char *codec_name;		/* for multi-codec */
+	const struct device_node *codec_of_node;
+	const char *platform_name;	/* for multi-platform */
+	const struct device_node *platform_of_node;
+	const char *cpu_dai_name;
+	const struct device_node *cpu_dai_of_node;
+	const char *codec_dai_name;
+
+	unsigned int dai_fmt;           /* format to set on init */
+
+	/* Keep DAI active over suspend */
+	unsigned int ignore_suspend:1;
+
+	/* Symmetry requirements */
+	unsigned int symmetric_rates:1;
+
+	/* pmdown_time is ignored at stop */
+	unsigned int ignore_pmdown_time:1;
+
+	/* codec/machine specific init - e.g. add machine controls */
+	int (*init)(struct snd_soc_pcm_runtime *rtd);
+
+	/* machine stream operations */
+	struct snd_soc_ops *ops;
+};
+
+struct snd_soc_codec_conf {
+	const char *dev_name;
+
+	/*
+	 * optional map of kcontrol, widget and path name prefixes that are
+	 * associated per device
+	 */
+	const char *name_prefix;
+
+	/*
+	 * set this to the desired compression type if you want to
+	 * override the one supplied in codec->driver->compress_type
+	 */
+	enum snd_soc_compress_type compress_type;
+};
+
+struct snd_soc_aux_dev {
+	const char *name;		/* Codec name */
+	const char *codec_name;		/* for multi-codec */
+
+	/* codec/machine specific init - e.g. add machine controls */
+	int (*init)(struct snd_soc_dapm_context *dapm);
+};
+
+/* SoC card */
+struct snd_soc_card {
+	const char *name;
+	const char *long_name;
+	const char *driver_name;
+	struct device *dev;
+	struct snd_card *snd_card;
+	struct module *owner;
+
+	struct list_head list;
+	struct mutex mutex;
+	struct mutex dapm_mutex;
+
+	bool instantiated;
+
+	int (*probe)(struct snd_soc_card *card);
+	int (*late_probe)(struct snd_soc_card *card);
+	int (*remove)(struct snd_soc_card *card);
+
+	/* the pre and post PM functions are used to do any PM work before and
+	 * after the codec and DAI's do any PM work. */
+	int (*suspend_pre)(struct snd_soc_card *card);
+	int (*suspend_post)(struct snd_soc_card *card);
+	int (*resume_pre)(struct snd_soc_card *card);
+	int (*resume_post)(struct snd_soc_card *card);
+
+	/* callbacks */
+	int (*set_bias_level)(struct snd_soc_card *,
+			      struct snd_soc_dapm_context *dapm,
+			      enum snd_soc_bias_level level);
+	int (*set_bias_level_post)(struct snd_soc_card *,
+				   struct snd_soc_dapm_context *dapm,
+				   enum snd_soc_bias_level level);
+
+	long pmdown_time;
+
+	/* CPU <--> Codec DAI links  */
+	struct snd_soc_dai_link *dai_link;
+	int num_links;
+	struct snd_soc_pcm_runtime *rtd;
+	int num_rtd;
+
+	/* optional codec specific configuration */
+	struct snd_soc_codec_conf *codec_conf;
+	int num_configs;
+
+	/*
+	 * optional auxiliary devices such as amplifiers or codecs with DAI
+	 * link unused
+	 */
+	struct snd_soc_aux_dev *aux_dev;
+	int num_aux_devs;
+	struct snd_soc_pcm_runtime *rtd_aux;
+	int num_aux_rtd;
+
+	const struct snd_kcontrol_new *controls;
+	int num_controls;
+
+	/*
+	 * Card-specific routes and widgets.
+	 */
+	const struct snd_soc_dapm_widget *dapm_widgets;
+	int num_dapm_widgets;
+	const struct snd_soc_dapm_route *dapm_routes;
+	int num_dapm_routes;
+	bool fully_routed;
+
+	struct work_struct deferred_resume_work;
+
+	/* lists of probed devices belonging to this card */
+	struct list_head codec_dev_list;
+	struct list_head platform_dev_list;
+	struct list_head dai_dev_list;
+
+	struct list_head widgets;
+	struct list_head paths;
+	struct list_head dapm_list;
+	struct list_head dapm_dirty;
+
+	/* Generic DAPM context for the card */
+	struct snd_soc_dapm_context dapm;
+	struct snd_soc_dapm_stats dapm_stats;
+
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *debugfs_card_root;
+	struct dentry *debugfs_pop_time;
+#endif
+	u32 pop_time;
+
+	void *drvdata;
+};
+
+/* SoC machine DAI configuration, glues a codec and cpu DAI together */
+struct snd_soc_pcm_runtime {
+	struct device *dev;
+	struct snd_soc_card *card;
+	struct snd_soc_dai_link *dai_link;
+	struct mutex pcm_mutex;
+	enum snd_soc_pcm_subclass pcm_subclass;
+	struct snd_pcm_ops ops;
+
+	unsigned int complete:1;
+	unsigned int dev_registered:1;
+
+	long pmdown_time;
+
+	/* runtime devices */
+	struct snd_pcm *pcm;
+	struct snd_soc_codec *codec;
+	struct snd_soc_platform *platform;
+	struct snd_soc_dai *codec_dai;
+	struct snd_soc_dai *cpu_dai;
+
+	struct delayed_work delayed_work;
+};
+
+/* mixer control */
+struct soc_mixer_control {
+	int min, max, platform_max;
+	unsigned int reg, rreg, shift, rshift, invert;
+};
+
+struct soc_bytes {
+	int base;
+	int num_regs;
+	u32 mask;
+};
+
+/* enumerated kcontrol */
+struct soc_enum {
+	unsigned short reg;
+	unsigned short reg2;
+	unsigned char shift_l;
+	unsigned char shift_r;
+	unsigned int max;
+	unsigned int mask;
+	const char * const *texts;
+	const unsigned int *values;
+	void *dapm;
+};
+
+/* codec IO */
+unsigned int snd_soc_read(struct snd_soc_codec *codec, unsigned int reg);
+unsigned int snd_soc_write(struct snd_soc_codec *codec,
+			   unsigned int reg, unsigned int val);
+unsigned int snd_soc_bulk_write_raw(struct snd_soc_codec *codec,
+				    unsigned int reg, const void *data, size_t len);
+
+/* device driver data */
+
+static inline void snd_soc_card_set_drvdata(struct snd_soc_card *card,
+		void *data)
+{
+	card->drvdata = data;
+}
+
+static inline void *snd_soc_card_get_drvdata(struct snd_soc_card *card)
+{
+	return card->drvdata;
+}
+
+static inline void snd_soc_codec_set_drvdata(struct snd_soc_codec *codec,
+		void *data)
+{
+	dev_set_drvdata(codec->dev, data);
+}
+
+static inline void *snd_soc_codec_get_drvdata(struct snd_soc_codec *codec)
+{
+	return dev_get_drvdata(codec->dev);
+}
+
+static inline void snd_soc_platform_set_drvdata(struct snd_soc_platform *platform,
+		void *data)
+{
+	dev_set_drvdata(platform->dev, data);
+}
+
+static inline void *snd_soc_platform_get_drvdata(struct snd_soc_platform *platform)
+{
+	return dev_get_drvdata(platform->dev);
+}
+
+static inline void snd_soc_pcm_set_drvdata(struct snd_soc_pcm_runtime *rtd,
+		void *data)
+{
+	dev_set_drvdata(rtd->dev, data);
+}
+
+static inline void *snd_soc_pcm_get_drvdata(struct snd_soc_pcm_runtime *rtd)
+{
+	return dev_get_drvdata(rtd->dev);
+}
+
+static inline void snd_soc_initialize_card_lists(struct snd_soc_card *card)
+{
+	INIT_LIST_HEAD(&card->dai_dev_list);
+	INIT_LIST_HEAD(&card->codec_dev_list);
+	INIT_LIST_HEAD(&card->platform_dev_list);
+	INIT_LIST_HEAD(&card->widgets);
+	INIT_LIST_HEAD(&card->paths);
+	INIT_LIST_HEAD(&card->dapm_list);
+}
+
+static inline bool snd_soc_volsw_is_stereo(struct soc_mixer_control *mc)
+{
+	if (mc->reg == mc->rreg && mc->shift == mc->rshift)
+		return 0;
+	/*
+	 * mc->reg == mc->rreg && mc->shift != mc->rshift, or
+	 * mc->reg != mc->rreg means that the control is
+	 * stereo (bits in one register or in two registers)
+	 */
+	return 1;
+}
+
+int snd_soc_util_init(void);
+void snd_soc_util_exit(void);
+
+int snd_soc_of_parse_card_name(struct snd_soc_card *card,
+			       const char *propname);
+int snd_soc_of_parse_audio_routing(struct snd_soc_card *card,
+				   const char *propname);
+
+#include <sound/soc-dai.h>
+
+#ifdef CONFIG_DEBUG_FS
+extern struct dentry *snd_soc_debugfs_root;
+#endif
+
+extern const struct dev_pm_ops snd_soc_pm_ops;
+
+#endif
diff --git a/include/sound/soundfont.h b/include/sound/soundfont.h
new file mode 100644
index 00000000..679df057
--- /dev/null
+++ b/include/sound/soundfont.h
@@ -0,0 +1,129 @@
+#ifndef __SOUND_SOUNDFONT_H
+#define __SOUND_SOUNDFONT_H
+
+/*
+ *  Soundfont defines and definitions.
+ *
+ *  Copyright (C) 1999 Steve Ratcliffe
+ *  Copyright (c) 1999-2000 Takashi iwai <tiwai@suse.de>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include "sfnt_info.h"
+#include "util_mem.h"
+
+#define SF_MAX_INSTRUMENTS	128	/* maximum instrument number */
+#define SF_MAX_PRESETS  256	/* drums are mapped from 128 to 256 */
+#define SF_IS_DRUM_BANK(z) ((z) == 128)
+
+struct snd_sf_zone {
+	struct snd_sf_zone *next;	/* Link to next */
+	unsigned char bank;		/* Midi bank for this zone */
+	unsigned char instr;		/* Midi program for this zone */
+	unsigned char mapped;		/* True if mapped to something else */
+
+	struct soundfont_voice_info v;	/* All the soundfont parameters */
+	int counter;
+	struct snd_sf_sample *sample;	/* Link to sample */
+
+	/* The following deals with preset numbers (programs) */
+	struct snd_sf_zone *next_instr;	/* Next zone of this instrument */
+	struct snd_sf_zone *next_zone;	/* Next zone in play list */
+};
+
+struct snd_sf_sample {
+	struct soundfont_sample_info v;
+	int counter;
+	struct snd_util_memblk *block;	/* allocated data block */
+	struct snd_sf_sample *next;
+};
+
+/*
+ * This represents all the information relating to a soundfont.
+ */
+struct snd_soundfont {
+	struct snd_soundfont *next;	/* Link to next */
+	/*struct snd_soundfont *prev;*/	/* Link to previous */
+	short  id;		/* file id */
+	short  type;		/* font type */
+	unsigned char name[SNDRV_SFNT_PATCH_NAME_LEN];	/* identifier */
+	struct snd_sf_zone *zones; /* Font information */
+	struct snd_sf_sample *samples; /* The sample headers */
+};
+
+/*
+ * Type of the sample access callback
+ */
+struct snd_sf_callback {
+	void *private_data;
+	int (*sample_new)(void *private_data, struct snd_sf_sample *sp,
+			  struct snd_util_memhdr *hdr,
+			  const void __user *buf, long count);
+	int (*sample_free)(void *private_data, struct snd_sf_sample *sp,
+			   struct snd_util_memhdr *hdr);
+	void (*sample_reset)(void *private);
+};
+
+/*
+ * List of soundfonts.
+ */
+struct snd_sf_list {
+	struct snd_soundfont *currsf; /* The currently open soundfont */
+	int open_client;	/* client pointer for lock */
+	int mem_used;		/* used memory size */
+	struct snd_sf_zone *presets[SF_MAX_PRESETS];
+	struct snd_soundfont *fonts; /* The list of soundfonts */
+	int fonts_size;	/* number of fonts allocated */
+	int zone_counter;	/* last allocated time for zone */
+	int sample_counter;	/* last allocated time for sample */
+	int zone_locked;	/* locked time for zone */
+	int sample_locked;	/* locked time for sample */
+	struct snd_sf_callback callback;	/* callback functions */
+	int presets_locked;
+	struct mutex presets_mutex;
+	spinlock_t lock;
+	struct snd_util_memhdr *memhdr;
+};
+
+/* Prototypes for soundfont.c */
+int snd_soundfont_load(struct snd_sf_list *sflist, const void __user *data,
+		       long count, int client);
+int snd_soundfont_load_guspatch(struct snd_sf_list *sflist, const char __user *data,
+				long count, int client);
+int snd_soundfont_close_check(struct snd_sf_list *sflist, int client);
+
+struct snd_sf_list *snd_sf_new(struct snd_sf_callback *callback,
+			       struct snd_util_memhdr *hdr);
+void snd_sf_free(struct snd_sf_list *sflist);
+
+int snd_soundfont_remove_samples(struct snd_sf_list *sflist);
+int snd_soundfont_remove_unlocked(struct snd_sf_list *sflist);
+
+int snd_soundfont_search_zone(struct snd_sf_list *sflist, int *notep, int vel,
+			      int preset, int bank,
+			      int def_preset, int def_bank,
+			      struct snd_sf_zone **table, int max_layers);
+
+/* Parameter conversions */
+int snd_sf_calc_parm_hold(int msec);
+int snd_sf_calc_parm_attack(int msec);
+int snd_sf_calc_parm_decay(int msec);
+#define snd_sf_calc_parm_delay(msec) (0x8000 - (msec) * 1000 / 725)
+extern int snd_sf_vol_table[128];
+int snd_sf_linear_to_log(unsigned int amount, int offset, int ratio);
+
+
+#endif /* __SOUND_SOUNDFONT_H */
diff --git a/include/sound/sta32x.h b/include/sound/sta32x.h
new file mode 100644
index 00000000..8d93b035
--- /dev/null
+++ b/include/sound/sta32x.h
@@ -0,0 +1,35 @@
+/*
+ * Platform data for ST STA32x ASoC codec driver.
+ *
+ * Copyright: 2011 Raumfeld GmbH
+ * Author: Johannes Stezenbach <js@sig21.net>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef __LINUX_SND__STA32X_H
+#define __LINUX_SND__STA32X_H
+
+#define STA32X_OCFG_2CH		0
+#define STA32X_OCFG_2_1CH	1
+#define STA32X_OCFG_1CH		3
+
+#define STA32X_OM_CH1		0
+#define STA32X_OM_CH2		1
+#define STA32X_OM_CH3		2
+
+#define STA32X_THERMAL_ADJUSTMENT_ENABLE	1
+#define STA32X_THERMAL_RECOVERY_ENABLE		2
+
+struct sta32x_platform_data {
+	int output_conf;
+	int ch1_output_mapping;
+	int ch2_output_mapping;
+	int ch3_output_mapping;
+	int thermal_conf;
+	int needs_esd_watchdog;
+};
+
+#endif /* __LINUX_SND__STA32X_H */
diff --git a/include/sound/tea575x-tuner.h b/include/sound/tea575x-tuner.h
new file mode 100644
index 00000000..ec3f910a
--- /dev/null
+++ b/include/sound/tea575x-tuner.h
@@ -0,0 +1,68 @@
+#ifndef __SOUND_TEA575X_TUNER_H
+#define __SOUND_TEA575X_TUNER_H
+
+/*
+ *   ALSA driver for TEA5757/5759 Philips AM/FM tuner chips
+ *
+ *	Copyright (c) 2004 Jaroslav Kysela <perex@perex.cz>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <linux/videodev2.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-device.h>
+
+#define TEA575X_FMIF	10700
+
+#define TEA575X_DATA	(1 << 0)
+#define TEA575X_CLK	(1 << 1)
+#define TEA575X_WREN	(1 << 2)
+#define TEA575X_MOST	(1 << 3)
+
+struct snd_tea575x;
+
+struct snd_tea575x_ops {
+	void (*set_pins)(struct snd_tea575x *tea, u8 pins);
+	u8 (*get_pins)(struct snd_tea575x *tea);
+	void (*set_direction)(struct snd_tea575x *tea, bool output);
+};
+
+struct snd_tea575x {
+	struct v4l2_device *v4l2_dev;
+	struct video_device vd;		/* video device */
+	int radio_nr;			/* radio_nr */
+	bool tea5759;			/* 5759 chip is present */
+	bool cannot_read_data;		/* Device cannot read the data pin */
+	bool mute;			/* Device is muted? */
+	bool stereo;			/* receiving stereo */
+	bool tuned;			/* tuned to a station */
+	unsigned int val;		/* hw value */
+	u32 freq;			/* frequency */
+	struct mutex mutex;
+	struct snd_tea575x_ops *ops;
+	void *private_data;
+	u8 card[32];
+	u8 bus_info[32];
+	struct v4l2_ctrl_handler ctrl_handler;
+	int (*ext_init)(struct snd_tea575x *tea);
+};
+
+int snd_tea575x_init(struct snd_tea575x *tea);
+void snd_tea575x_exit(struct snd_tea575x *tea);
+
+#endif /* __SOUND_TEA575X_TUNER_H */
diff --git a/include/sound/tea6330t.h b/include/sound/tea6330t.h
new file mode 100644
index 00000000..51b282b7
--- /dev/null
+++ b/include/sound/tea6330t.h
@@ -0,0 +1,31 @@
+#ifndef __SOUND_TEA6330T_H
+#define __SOUND_TEA6330T_H
+
+/*
+ *  Routines for control of TEA6330T circuit.
+ *  Sound fader control circuit for car radios.
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ *
+ */
+
+#include "i2c.h"		/* generic i2c support */
+
+int snd_tea6330t_detect(struct snd_i2c_bus *bus, int equalizer);
+int snd_tea6330t_update_mixer(struct snd_card *card, struct snd_i2c_bus *bus,
+			      int equalizer, int fader);
+
+#endif /* __SOUND_TEA6330T_H */
diff --git a/include/sound/timer.h b/include/sound/timer.h
new file mode 100644
index 00000000..7990469a
--- /dev/null
+++ b/include/sound/timer.h
@@ -0,0 +1,143 @@
+#ifndef __SOUND_TIMER_H
+#define __SOUND_TIMER_H
+
+/*
+ *  Timer abstract layer
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>,
+ *		     Abramo Bagnara <abramo@alsa-project.org>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <sound/asound.h>
+#include <linux/interrupt.h>
+
+#define snd_timer_chip(timer) ((timer)->private_data)
+
+#define SNDRV_TIMER_DEVICES	16
+
+#define SNDRV_TIMER_DEV_FLG_PCM	0x10000000
+
+#define SNDRV_TIMER_HW_AUTO	0x00000001	/* auto trigger is supported */
+#define SNDRV_TIMER_HW_STOP	0x00000002	/* call stop before start */
+#define SNDRV_TIMER_HW_SLAVE	0x00000004	/* only slave timer (variable resolution) */
+#define SNDRV_TIMER_HW_FIRST	0x00000008	/* first tick can be incomplete */
+#define SNDRV_TIMER_HW_TASKLET	0x00000010	/* timer is called from tasklet */
+
+#define SNDRV_TIMER_IFLG_SLAVE	  0x00000001
+#define SNDRV_TIMER_IFLG_RUNNING  0x00000002
+#define SNDRV_TIMER_IFLG_START	  0x00000004
+#define SNDRV_TIMER_IFLG_AUTO	  0x00000008	/* auto restart */
+#define SNDRV_TIMER_IFLG_FAST	  0x00000010	/* fast callback (do not use tasklet) */
+#define SNDRV_TIMER_IFLG_CALLBACK 0x00000020	/* timer callback is active */
+#define SNDRV_TIMER_IFLG_EXCLUSIVE 0x00000040	/* exclusive owner - no more instances */
+#define SNDRV_TIMER_IFLG_EARLY_EVENT 0x00000080	/* write early event to the poll queue */
+
+#define SNDRV_TIMER_FLG_CHANGE	0x00000001
+#define SNDRV_TIMER_FLG_RESCHED	0x00000002	/* need reschedule */
+
+struct snd_timer;
+
+struct snd_timer_hardware {
+	/* -- must be filled with low-level driver */
+	unsigned int flags;		/* various flags */
+	unsigned long resolution;	/* average timer resolution for one tick in nsec */
+	unsigned long resolution_min;	/* minimal resolution */
+	unsigned long resolution_max;	/* maximal resolution */
+	unsigned long ticks;		/* max timer ticks per interrupt */
+	/* -- low-level functions -- */
+	int (*open) (struct snd_timer * timer);
+	int (*close) (struct snd_timer * timer);
+	unsigned long (*c_resolution) (struct snd_timer * timer);
+	int (*start) (struct snd_timer * timer);
+	int (*stop) (struct snd_timer * timer);
+	int (*set_period) (struct snd_timer * timer, unsigned long period_num, unsigned long period_den);
+	int (*precise_resolution) (struct snd_timer * timer, unsigned long *num, unsigned long *den);
+};
+
+struct snd_timer {
+	int tmr_class;
+	struct snd_card *card;
+	struct module *module;
+	int tmr_device;
+	int tmr_subdevice;
+	char id[64];
+	char name[80];
+	unsigned int flags;
+	int running;			/* running instances */
+	unsigned long sticks;		/* schedule ticks */
+	void *private_data;
+	void (*private_free) (struct snd_timer *timer);
+	struct snd_timer_hardware hw;
+	spinlock_t lock;
+	struct list_head device_list;
+	struct list_head open_list_head;
+	struct list_head active_list_head;
+	struct list_head ack_list_head;
+	struct list_head sack_list_head; /* slow ack list head */
+	struct tasklet_struct task_queue;
+};
+
+struct snd_timer_instance {
+	struct snd_timer *timer;
+	char *owner;
+	unsigned int flags;
+	void *private_data;
+	void (*private_free) (struct snd_timer_instance *ti);
+	void (*callback) (struct snd_timer_instance *timeri,
+			  unsigned long ticks, unsigned long resolution);
+	void (*ccallback) (struct snd_timer_instance * timeri,
+			   int event,
+			   struct timespec * tstamp,
+			   unsigned long resolution);
+	void *callback_data;
+	unsigned long ticks;		/* auto-load ticks when expired */
+	unsigned long cticks;		/* current ticks */
+	unsigned long pticks;		/* accumulated ticks for callback */
+	unsigned long resolution;	/* current resolution for tasklet */
+	unsigned long lost;		/* lost ticks */
+	int slave_class;
+	unsigned int slave_id;
+	struct list_head open_list;
+	struct list_head active_list;
+	struct list_head ack_list;
+	struct list_head slave_list_head;
+	struct list_head slave_active_head;
+	struct snd_timer_instance *master;
+};
+
+/*
+ *  Registering
+ */
+
+int snd_timer_new(struct snd_card *card, char *id, struct snd_timer_id *tid, struct snd_timer **rtimer);
+void snd_timer_notify(struct snd_timer *timer, int event, struct timespec *tstamp);
+int snd_timer_global_new(char *id, int device, struct snd_timer **rtimer);
+int snd_timer_global_free(struct snd_timer *timer);
+int snd_timer_global_register(struct snd_timer *timer);
+
+int snd_timer_open(struct snd_timer_instance **ti, char *owner, struct snd_timer_id *tid, unsigned int slave_id);
+int snd_timer_close(struct snd_timer_instance *timeri);
+unsigned long snd_timer_resolution(struct snd_timer_instance *timeri);
+int snd_timer_start(struct snd_timer_instance *timeri, unsigned int ticks);
+int snd_timer_stop(struct snd_timer_instance *timeri);
+int snd_timer_continue(struct snd_timer_instance *timeri);
+int snd_timer_pause(struct snd_timer_instance *timeri);
+
+void snd_timer_interrupt(struct snd_timer *timer, unsigned long ticks_left);
+
+#endif /* __SOUND_TIMER_H */
diff --git a/include/sound/tlv.h b/include/sound/tlv.h
new file mode 100644
index 00000000..7067e2df
--- /dev/null
+++ b/include/sound/tlv.h
@@ -0,0 +1,76 @@
+#ifndef __SOUND_TLV_H
+#define __SOUND_TLV_H
+
+/*
+ *  Advanced Linux Sound Architecture - ALSA - Driver
+ *  Copyright (c) 2006 by Jaroslav Kysela <perex@perex.cz>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+/*
+ * TLV structure is right behind the struct snd_ctl_tlv:
+ *   unsigned int type  	- see SNDRV_CTL_TLVT_*
+ *   unsigned int length
+ *   .... data aligned to sizeof(unsigned int), use
+ *        block_length = (length + (sizeof(unsigned int) - 1)) &
+ *                       ~(sizeof(unsigned int) - 1)) ....
+ */
+
+#define SNDRV_CTL_TLVT_CONTAINER 0	/* one level down - group of TLVs */
+#define SNDRV_CTL_TLVT_DB_SCALE	1       /* dB scale */
+#define SNDRV_CTL_TLVT_DB_LINEAR 2	/* linear volume */
+#define SNDRV_CTL_TLVT_DB_RANGE 3	/* dB range container */
+#define SNDRV_CTL_TLVT_DB_MINMAX 4	/* dB scale with min/max */
+#define SNDRV_CTL_TLVT_DB_MINMAX_MUTE 5	/* dB scale with min/max with mute */
+
+#define TLV_DB_SCALE_MASK	0xffff
+#define TLV_DB_SCALE_MUTE	0x10000
+#define TLV_DB_SCALE_ITEM(min, step, mute)			\
+	SNDRV_CTL_TLVT_DB_SCALE, 2 * sizeof(unsigned int),	\
+	(min), ((step) & TLV_DB_SCALE_MASK) | ((mute) ? TLV_DB_SCALE_MUTE : 0)
+#define DECLARE_TLV_DB_SCALE(name, min, step, mute) \
+	unsigned int name[] = { TLV_DB_SCALE_ITEM(min, step, mute) }
+
+/* dB scale specified with min/max values instead of step */
+#define TLV_DB_MINMAX_ITEM(min_dB, max_dB)			\
+	SNDRV_CTL_TLVT_DB_MINMAX, 2 * sizeof(unsigned int),	\
+	(min_dB), (max_dB)
+#define TLV_DB_MINMAX_MUTE_ITEM(min_dB, max_dB)			\
+	SNDRV_CTL_TLVT_DB_MINMAX_MUTE, 2 * sizeof(unsigned int),	\
+	(min_dB), (max_dB)
+#define DECLARE_TLV_DB_MINMAX(name, min_dB, max_dB) \
+	unsigned int name[] = { TLV_DB_MINMAX_ITEM(min_dB, max_dB) }
+#define DECLARE_TLV_DB_MINMAX_MUTE(name, min_dB, max_dB) \
+	unsigned int name[] = { TLV_DB_MINMAX_MUTE_ITEM(min_dB, max_dB) }
+
+/* linear volume between min_dB and max_dB (.01dB unit) */
+#define TLV_DB_LINEAR_ITEM(min_dB, max_dB)		    \
+	SNDRV_CTL_TLVT_DB_LINEAR, 2 * sizeof(unsigned int), \
+	(min_dB), (max_dB)
+#define DECLARE_TLV_DB_LINEAR(name, min_dB, max_dB)	\
+	unsigned int name[] = { TLV_DB_LINEAR_ITEM(min_dB, max_dB) }
+
+/* dB range container */
+/* Each item is: <min> <max> <TLV> */
+/* The below assumes that each item TLV is 4 words like DB_SCALE or LINEAR */
+#define TLV_DB_RANGE_HEAD(num)			\
+	SNDRV_CTL_TLVT_DB_RANGE, 6 * (num) * sizeof(unsigned int)
+
+#define TLV_DB_GAIN_MUTE	-9999999
+
+#endif /* __SOUND_TLV_H */
diff --git a/include/sound/tlv320aic32x4.h b/include/sound/tlv320aic32x4.h
new file mode 100644
index 00000000..c009f70b
--- /dev/null
+++ b/include/sound/tlv320aic32x4.h
@@ -0,0 +1,31 @@
+/*
+ * tlv320aic32x4.h  --  TLV320AIC32X4 Soc Audio driver platform data
+ *
+ * Copyright 2011 Vista Silicon S.L.
+ *
+ * Author: Javier Martin <javier.martin@vista-silicon.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _AIC32X4_PDATA_H
+#define _AIC32X4_PDATA_H
+
+#define AIC32X4_PWR_MICBIAS_2075_LDOIN		0x00000001
+#define AIC32X4_PWR_AVDD_DVDD_WEAK_DISABLE	0x00000002
+#define AIC32X4_PWR_AIC32X4_LDO_ENABLE		0x00000004
+#define AIC32X4_PWR_CMMODE_LDOIN_RANGE_18_36	0x00000008
+#define AIC32X4_PWR_CMMODE_HP_LDOIN_POWERED	0x00000010
+
+#define AIC32X4_MICPGA_ROUTE_LMIC_IN2R_10K	0x00000001
+#define AIC32X4_MICPGA_ROUTE_RMIC_IN1L_10K	0x00000002
+
+struct aic32x4_pdata {
+	u32 power_cfg;
+	u32 micpga_routing;
+	bool swapdacs;
+};
+
+#endif
diff --git a/include/sound/tlv320aic3x.h b/include/sound/tlv320aic3x.h
new file mode 100644
index 00000000..ffd9bc79
--- /dev/null
+++ b/include/sound/tlv320aic3x.h
@@ -0,0 +1,58 @@
+/*
+ * Platform data for Texas Instruments TLV320AIC3x codec
+ *
+ * Author: Jarkko Nikula <jarkko.nikula@bitmer.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __TLV320AIC3x_H__
+#define __TLV320AIC3x_H__
+
+/* GPIO API */
+enum {
+	AIC3X_GPIO1_FUNC_DISABLED		= 0,
+	AIC3X_GPIO1_FUNC_AUDIO_WORDCLK_ADC	= 1,
+	AIC3X_GPIO1_FUNC_CLOCK_MUX		= 2,
+	AIC3X_GPIO1_FUNC_CLOCK_MUX_DIV2		= 3,
+	AIC3X_GPIO1_FUNC_CLOCK_MUX_DIV4		= 4,
+	AIC3X_GPIO1_FUNC_CLOCK_MUX_DIV8		= 5,
+	AIC3X_GPIO1_FUNC_SHORT_CIRCUIT_IRQ	= 6,
+	AIC3X_GPIO1_FUNC_AGC_NOISE_IRQ		= 7,
+	AIC3X_GPIO1_FUNC_INPUT			= 8,
+	AIC3X_GPIO1_FUNC_OUTPUT			= 9,
+	AIC3X_GPIO1_FUNC_DIGITAL_MIC_MODCLK	= 10,
+	AIC3X_GPIO1_FUNC_AUDIO_WORDCLK		= 11,
+	AIC3X_GPIO1_FUNC_BUTTON_IRQ		= 12,
+	AIC3X_GPIO1_FUNC_HEADSET_DETECT_IRQ	= 13,
+	AIC3X_GPIO1_FUNC_HEADSET_DETECT_OR_BUTTON_IRQ	= 14,
+	AIC3X_GPIO1_FUNC_ALL_IRQ		= 16
+};
+
+enum {
+	AIC3X_GPIO2_FUNC_DISABLED		= 0,
+	AIC3X_GPIO2_FUNC_HEADSET_DETECT_IRQ	= 2,
+	AIC3X_GPIO2_FUNC_INPUT			= 3,
+	AIC3X_GPIO2_FUNC_OUTPUT			= 4,
+	AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT	= 5,
+	AIC3X_GPIO2_FUNC_AUDIO_BITCLK		= 8,
+	AIC3X_GPIO2_FUNC_HEADSET_DETECT_OR_BUTTON_IRQ = 9,
+	AIC3X_GPIO2_FUNC_ALL_IRQ		= 10,
+	AIC3X_GPIO2_FUNC_SHORT_CIRCUIT_OR_AGC_IRQ = 11,
+	AIC3X_GPIO2_FUNC_HEADSET_OR_BUTTON_PRESS_OR_SHORT_CIRCUIT_IRQ = 12,
+	AIC3X_GPIO2_FUNC_SHORT_CIRCUIT_IRQ	= 13,
+	AIC3X_GPIO2_FUNC_AGC_NOISE_IRQ		= 14,
+	AIC3X_GPIO2_FUNC_BUTTON_PRESS_IRQ	= 15
+};
+
+struct aic3x_setup_data {
+	unsigned int gpio_func[2];
+};
+
+struct aic3x_pdata {
+	int gpio_reset; /* < 0 if not used */
+	struct aic3x_setup_data *setup;
+};
+
+#endif
diff --git a/include/sound/tlv320dac33-plat.h b/include/sound/tlv320dac33-plat.h
new file mode 100644
index 00000000..0b94192a
--- /dev/null
+++ b/include/sound/tlv320dac33-plat.h
@@ -0,0 +1,24 @@
+/*
+ * Platform header for Texas Instruments TLV320DAC33 codec driver
+ *
+ * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+ *
+ * Copyright:   (C) 2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __TLV320DAC33_PLAT_H
+#define __TLV320DAC33_PLAT_H
+
+struct tlv320dac33_platform_data {
+	int power_gpio;
+	int mode1_latency; /* latency caused by the i2c writes in us */
+	int auto_fifo_config; /* FIFO config based on the period size */
+	int keep_bclk;	/* Keep the BCLK running in FIFO modes */
+	u8 burst_bclkdiv;
+};
+
+#endif /* __TLV320DAC33_PLAT_H */
diff --git a/include/sound/tpa6130a2-plat.h b/include/sound/tpa6130a2-plat.h
new file mode 100644
index 00000000..4cc10938
--- /dev/null
+++ b/include/sound/tpa6130a2-plat.h
@@ -0,0 +1,30 @@
+/*
+ * TPA6130A2 driver platform header
+ *
+ * Copyright (C) Nokia Corporation
+ *
+ * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef TPA6130A2_PLAT_H
+#define TPA6130A2_PLAT_H
+
+struct tpa6130a2_platform_data {
+	int power_gpio;
+};
+
+#endif
diff --git a/include/sound/trident.h b/include/sound/trident.h
new file mode 100644
index 00000000..9f191a0a
--- /dev/null
+++ b/include/sound/trident.h
@@ -0,0 +1,445 @@
+#ifndef __SOUND_TRIDENT_H
+#define __SOUND_TRIDENT_H
+
+/*
+ *  audio@tridentmicro.com
+ *  Fri Feb 19 15:55:28 MST 1999
+ *  Definitions for Trident 4DWave DX/NX chips
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include "pcm.h"
+#include "mpu401.h"
+#include "ac97_codec.h"
+#include "util_mem.h"
+
+#define TRIDENT_DEVICE_ID_DX		((PCI_VENDOR_ID_TRIDENT<<16)|PCI_DEVICE_ID_TRIDENT_4DWAVE_DX)
+#define TRIDENT_DEVICE_ID_NX		((PCI_VENDOR_ID_TRIDENT<<16)|PCI_DEVICE_ID_TRIDENT_4DWAVE_NX)
+#define TRIDENT_DEVICE_ID_SI7018	((PCI_VENDOR_ID_SI<<16)|PCI_DEVICE_ID_SI_7018)
+
+#define SNDRV_TRIDENT_VOICE_TYPE_PCM		0
+#define SNDRV_TRIDENT_VOICE_TYPE_SYNTH		1
+#define SNDRV_TRIDENT_VOICE_TYPE_MIDI		2
+
+#define SNDRV_TRIDENT_VFLG_RUNNING		(1<<0)
+
+/* TLB code constants */
+#define SNDRV_TRIDENT_PAGE_SIZE			4096
+#define SNDRV_TRIDENT_PAGE_SHIFT			12
+#define SNDRV_TRIDENT_PAGE_MASK			((1<<SNDRV_TRIDENT_PAGE_SHIFT)-1)
+#define SNDRV_TRIDENT_MAX_PAGES			4096
+
+/*
+ * Direct registers
+ */
+
+#define TRID_REG(trident, x) ((trident)->port + (x))
+
+#define ID_4DWAVE_DX        0x2000
+#define ID_4DWAVE_NX        0x2001
+
+/* Bank definitions */
+
+#define T4D_BANK_A	0
+#define T4D_BANK_B	1
+#define T4D_NUM_BANKS	2
+
+/* Register definitions */
+
+/* Global registers */
+
+enum global_control_bits {
+	CHANNEL_IDX	= 0x0000003f,
+	OVERRUN_IE	= 0x00000400,	/* interrupt enable: capture overrun */
+	UNDERRUN_IE	= 0x00000800,	/* interrupt enable: playback underrun */
+	ENDLP_IE	= 0x00001000,	/* interrupt enable: end of buffer */
+	MIDLP_IE	= 0x00002000,	/* interrupt enable: middle buffer */
+	ETOG_IE		= 0x00004000,	/* interrupt enable: envelope toggling */
+	EDROP_IE	= 0x00008000,	/* interrupt enable: envelope drop */
+	BANK_B_EN	= 0x00010000,	/* SiS: enable bank B (64 channels) */
+	PCMIN_B_MIX	= 0x00020000,	/* SiS: PCM IN B mixing enable */
+	I2S_OUT_ASSIGN	= 0x00040000,	/* SiS: I2S Out contains surround PCM */
+	SPDIF_OUT_ASSIGN= 0x00080000,	/* SiS: 0=S/PDIF L/R | 1=PCM Out FIFO */
+	MAIN_OUT_ASSIGN = 0x00100000,	/* SiS: 0=PCM Out FIFO | 1=MMC Out buffer */
+};
+
+enum miscint_bits {
+	PB_UNDERRUN_IRQ = 0x00000001, REC_OVERRUN_IRQ = 0x00000002,
+	SB_IRQ		= 0x00000004, MPU401_IRQ      = 0x00000008,
+	OPL3_IRQ        = 0x00000010, ADDRESS_IRQ     = 0x00000020,
+	ENVELOPE_IRQ    = 0x00000040, PB_UNDERRUN     = 0x00000100,
+	REC_OVERRUN	= 0x00000200, MIXER_UNDERFLOW = 0x00000400,
+	MIXER_OVERFLOW  = 0x00000800, NX_SB_IRQ_DISABLE = 0x00001000,
+        ST_TARGET_REACHED = 0x00008000,
+	PB_24K_MODE     = 0x00010000, ST_IRQ_EN       = 0x00800000,
+	ACGPIO_IRQ	= 0x01000000
+};
+
+/* T2 legacy dma control registers. */
+#define LEGACY_DMAR0                0x00  // ADR0
+#define LEGACY_DMAR4                0x04  // CNT0
+#define LEGACY_DMAR6		    0x06  // CNT0 - High bits
+#define LEGACY_DMAR11               0x0b  // MOD 
+#define LEGACY_DMAR15               0x0f  // MMR 
+
+#define T4D_START_A		     0x80
+#define T4D_STOP_A		     0x84
+#define T4D_DLY_A		     0x88
+#define T4D_SIGN_CSO_A		     0x8c
+#define T4D_CSPF_A		     0x90
+#define T4D_CSPF_B		     0xbc
+#define T4D_CEBC_A		     0x94
+#define T4D_AINT_A		     0x98
+#define T4D_AINTEN_A		     0x9c
+#define T4D_LFO_GC_CIR               0xa0
+#define T4D_MUSICVOL_WAVEVOL         0xa8
+#define T4D_SBDELTA_DELTA_R          0xac
+#define T4D_MISCINT                  0xb0
+#define T4D_START_B                  0xb4
+#define T4D_STOP_B                   0xb8
+#define T4D_SBBL_SBCL                0xc0
+#define T4D_SBCTRL_SBE2R_SBDD        0xc4
+#define T4D_STIMER		     0xc8
+#define T4D_AINT_B                   0xd8
+#define T4D_AINTEN_B                 0xdc
+#define T4D_RCI                      0x70
+
+/* MPU-401 UART */
+#define T4D_MPU401_BASE             0x20
+#define T4D_MPUR0                   0x20
+#define T4D_MPUR1                   0x21
+#define T4D_MPUR2                   0x22
+#define T4D_MPUR3                   0x23
+
+/* S/PDIF Registers */
+#define NX_SPCTRL_SPCSO             0x24
+#define NX_SPLBA                    0x28
+#define NX_SPESO                    0x2c
+#define NX_SPCSTATUS                0x64
+
+/* Joystick */
+#define GAMEPORT_GCR                0x30
+#define GAMEPORT_MODE_ADC           0x80
+#define GAMEPORT_LEGACY             0x31
+#define GAMEPORT_AXES               0x34
+
+/* NX Specific Registers */
+#define NX_TLBC                     0x6c
+
+/* Channel Registers */
+
+#define CH_START		    0xe0
+
+#define CH_DX_CSO_ALPHA_FMS         0xe0
+#define CH_DX_ESO_DELTA             0xe8
+#define CH_DX_FMC_RVOL_CVOL         0xec
+
+#define CH_NX_DELTA_CSO             0xe0
+#define CH_NX_DELTA_ESO             0xe8
+#define CH_NX_ALPHA_FMS_FMC_RVOL_CVOL 0xec
+
+#define CH_LBA                      0xe4
+#define CH_GVSEL_PAN_VOL_CTRL_EC    0xf0
+#define CH_EBUF1                    0xf4
+#define CH_EBUF2                    0xf8
+
+/* AC-97 Registers */
+
+#define DX_ACR0_AC97_W              0x40
+#define DX_ACR1_AC97_R              0x44
+#define DX_ACR2_AC97_COM_STAT       0x48
+
+#define NX_ACR0_AC97_COM_STAT       0x40
+#define NX_ACR1_AC97_W              0x44
+#define NX_ACR2_AC97_R_PRIMARY      0x48
+#define NX_ACR3_AC97_R_SECONDARY    0x4c
+
+#define SI_AC97_WRITE		    0x40
+#define SI_AC97_READ		    0x44
+#define SI_SERIAL_INTF_CTRL	    0x48
+#define SI_AC97_GPIO		    0x4c
+#define SI_ASR0			    0x50
+#define SI_SPDIF_CS		    0x70
+#define SI_GPIO			    0x7c
+
+enum trident_nx_ac97_bits {
+	/* ACR1-3 */
+	NX_AC97_BUSY_WRITE 	= 0x0800,
+	NX_AC97_BUSY_READ	= 0x0800,
+	NX_AC97_BUSY_DATA 	= 0x0400,
+	NX_AC97_WRITE_SECONDARY = 0x0100,
+	/* ACR0 */
+	NX_AC97_SECONDARY_READY = 0x0040,
+	NX_AC97_SECONDARY_RECORD = 0x0020,
+	NX_AC97_SURROUND_OUTPUT = 0x0010,
+	NX_AC97_PRIMARY_READY	= 0x0008,
+	NX_AC97_PRIMARY_RECORD	= 0x0004,
+	NX_AC97_PCM_OUTPUT	= 0x0002,
+	NX_AC97_WARM_RESET	= 0x0001
+};
+
+enum trident_dx_ac97_bits {
+	DX_AC97_BUSY_WRITE	= 0x8000,
+	DX_AC97_BUSY_READ	= 0x8000,
+	DX_AC97_READY		= 0x0010,
+	DX_AC97_RECORD		= 0x0008,
+	DX_AC97_PLAYBACK	= 0x0002
+};
+
+enum sis7018_ac97_bits {
+	SI_AC97_BUSY_WRITE =	0x00008000,
+	SI_AC97_AUDIO_BUSY =	0x00004000,
+	SI_AC97_MODEM_BUSY =	0x00002000,
+	SI_AC97_BUSY_READ =	0x00008000,
+	SI_AC97_SECONDARY =	0x00000080,
+};
+
+enum serial_intf_ctrl_bits {
+	WARM_RESET	= 0x00000001,
+	COLD_RESET	= 0x00000002,
+	I2S_CLOCK	= 0x00000004,
+	PCM_SEC_AC97	= 0x00000008,
+	AC97_DBL_RATE	= 0x00000010,
+	SPDIF_EN	= 0x00000020,
+	I2S_OUTPUT_EN	= 0x00000040,
+	I2S_INPUT_EN	= 0x00000080,
+	PCMIN		= 0x00000100,
+	LINE1IN		= 0x00000200,
+	MICIN		= 0x00000400,
+	LINE2IN		= 0x00000800,
+	HEAD_SET_IN	= 0x00001000,
+	GPIOIN		= 0x00002000,
+	/* 7018 spec says id = 01 but the demo board routed to 10
+	   SECONDARY_ID= 0x00004000, */
+	SECONDARY_ID	= 0x00004000,
+	PCMOUT		= 0x00010000,
+	SURROUT		= 0x00020000,
+	CENTEROUT	= 0x00040000,
+	LFEOUT		= 0x00080000,
+	LINE1OUT	= 0x00100000,
+	LINE2OUT	= 0x00200000,
+	GPIOOUT		= 0x00400000,
+	SI_AC97_PRIMARY_READY = 0x01000000,
+	SI_AC97_SECONDARY_READY = 0x02000000,
+	SI_AC97_POWERDOWN = 0x04000000,
+};
+                                                                                                                                   
+/* PCM defaults */
+
+#define T4D_DEFAULT_PCM_VOL	10	/* 0 - 255 */
+#define T4D_DEFAULT_PCM_PAN	0	/* 0 - 127 */
+#define T4D_DEFAULT_PCM_RVOL	127	/* 0 - 127 */
+#define T4D_DEFAULT_PCM_CVOL	127	/* 0 - 127 */
+
+struct snd_trident;
+struct snd_trident_voice;
+struct snd_trident_pcm_mixer;
+
+struct snd_trident_port {
+	struct snd_midi_channel_set * chset;
+	struct snd_trident * trident;
+	int mode;		/* operation mode */
+	int client;		/* sequencer client number */
+	int port;		/* sequencer port number */
+	unsigned int midi_has_voices: 1;
+};
+
+struct snd_trident_memblk_arg {
+	short first_page, last_page;
+};
+
+struct snd_trident_tlb {
+	unsigned int * entries;		/* 16k-aligned TLB table */
+	dma_addr_t entries_dmaaddr;	/* 16k-aligned PCI address to TLB table */
+	unsigned long * shadow_entries;	/* shadow entries with virtual addresses */
+	struct snd_dma_buffer buffer;
+	struct snd_util_memhdr * memhdr;	/* page allocation list */
+	struct snd_dma_buffer silent_page;
+};
+
+struct snd_trident_voice {
+	unsigned int number;
+	unsigned int use: 1,
+	    pcm: 1,
+	    synth:1,
+	    midi: 1;
+	unsigned int flags;
+	unsigned char client;
+	unsigned char port;
+	unsigned char index;
+
+	struct snd_trident_sample_ops *sample_ops;
+
+	/* channel parameters */
+	unsigned int CSO;		/* 24 bits (16 on DX) */
+	unsigned int ESO;		/* 24 bits (16 on DX) */
+	unsigned int LBA;		/* 30 bits */
+	unsigned short EC;		/* 12 bits */
+	unsigned short Alpha;		/* 12 bits */
+	unsigned short Delta;		/* 16 bits */
+	unsigned short Attribute;	/* 16 bits - SiS 7018 */
+	unsigned short Vol;		/* 12 bits (6.6) */
+	unsigned char Pan;		/* 7 bits (1.4.2) */
+	unsigned char GVSel;		/* 1 bit */
+	unsigned char RVol;		/* 7 bits (5.2) */
+	unsigned char CVol;		/* 7 bits (5.2) */
+	unsigned char FMC;		/* 2 bits */
+	unsigned char CTRL;		/* 4 bits */
+	unsigned char FMS;		/* 4 bits */
+	unsigned char LFO;		/* 8 bits */
+
+	unsigned int negCSO;	/* nonzero - use negative CSO */
+
+	struct snd_util_memblk *memblk;	/* memory block if TLB enabled */
+
+	/* PCM data */
+
+	struct snd_trident *trident;
+	struct snd_pcm_substream *substream;
+	struct snd_trident_voice *extra;	/* extra PCM voice (acts as interrupt generator) */
+	unsigned int running: 1,
+            capture: 1,
+            spdif: 1,
+            foldback: 1,
+            isync: 1,
+            isync2: 1,
+            isync3: 1;
+	int foldback_chan;		/* foldback subdevice number */
+	unsigned int stimer;		/* global sample timer (to detect spurious interrupts) */
+	unsigned int spurious_threshold; /* spurious threshold */
+	unsigned int isync_mark;
+	unsigned int isync_max;
+	unsigned int isync_ESO;
+
+	/* --- */
+
+	void *private_data;
+	void (*private_free)(struct snd_trident_voice *voice);
+};
+
+struct snd_4dwave {
+	int seq_client;
+
+	struct snd_trident_port seq_ports[4];
+	struct snd_trident_voice voices[64];	
+
+	int ChanSynthCount;		/* number of allocated synth channels */
+	int max_size;			/* maximum synth memory size in bytes */
+	int current_size;		/* current allocated synth mem in bytes */
+};
+
+struct snd_trident_pcm_mixer {
+	struct snd_trident_voice *voice;	/* active voice */
+	unsigned short vol;		/* front volume */
+	unsigned char pan;		/* pan control */
+	unsigned char rvol;		/* rear volume */
+	unsigned char cvol;		/* center volume */
+	unsigned char pad;
+};
+
+struct snd_trident {
+	int irq;
+
+	unsigned int device;	/* device ID */
+
+        unsigned char  bDMAStart;
+
+	unsigned long port;
+	unsigned long midi_port;
+
+	unsigned int spurious_irq_count;
+	unsigned int spurious_irq_max_delta;
+
+        struct snd_trident_tlb tlb;	/* TLB entries for NX cards */
+
+	unsigned char spdif_ctrl;
+	unsigned char spdif_pcm_ctrl;
+	unsigned int spdif_bits;
+	unsigned int spdif_pcm_bits;
+	struct snd_kcontrol *spdif_pcm_ctl;	/* S/PDIF settings */
+	unsigned int ac97_ctrl;
+        
+        unsigned int ChanMap[2];	/* allocation map for hardware channels */
+        
+        int ChanPCM;			/* max number of PCM channels */
+	int ChanPCMcnt;			/* actual number of PCM channels */
+
+	unsigned int ac97_detect: 1;	/* 1 = AC97 in detection phase */
+	unsigned int in_suspend: 1;	/* 1 during suspend/resume */
+
+	struct snd_4dwave synth;	/* synth specific variables */
+
+	spinlock_t event_lock;
+	spinlock_t voice_alloc;
+
+	struct snd_dma_device dma_dev;
+
+	struct pci_dev *pci;
+	struct snd_card *card;
+	struct snd_pcm *pcm;		/* ADC/DAC PCM */
+	struct snd_pcm *foldback;	/* Foldback PCM */
+	struct snd_pcm *spdif;	/* SPDIF PCM */
+	struct snd_rawmidi *rmidi;
+
+	struct snd_ac97_bus *ac97_bus;
+	struct snd_ac97 *ac97;
+	struct snd_ac97 *ac97_sec;
+
+	unsigned int musicvol_wavevol;
+	struct snd_trident_pcm_mixer pcm_mixer[32];
+	struct snd_kcontrol *ctl_vol;	/* front volume */
+	struct snd_kcontrol *ctl_pan;	/* pan */
+	struct snd_kcontrol *ctl_rvol;	/* rear volume */
+	struct snd_kcontrol *ctl_cvol;	/* center volume */
+
+	spinlock_t reg_lock;
+
+	struct gameport *gameport;
+};
+
+int snd_trident_create(struct snd_card *card,
+		       struct pci_dev *pci,
+		       int pcm_streams,
+		       int pcm_spdif_device,
+		       int max_wavetable_size,
+		       struct snd_trident ** rtrident);
+int snd_trident_create_gameport(struct snd_trident *trident);
+
+int snd_trident_pcm(struct snd_trident * trident, int device, struct snd_pcm **rpcm);
+int snd_trident_foldback_pcm(struct snd_trident * trident, int device, struct snd_pcm **rpcm);
+int snd_trident_spdif_pcm(struct snd_trident * trident, int device, struct snd_pcm **rpcm);
+int snd_trident_attach_synthesizer(struct snd_trident * trident);
+struct snd_trident_voice *snd_trident_alloc_voice(struct snd_trident * trident, int type,
+					     int client, int port);
+void snd_trident_free_voice(struct snd_trident * trident, struct snd_trident_voice *voice);
+void snd_trident_start_voice(struct snd_trident * trident, unsigned int voice);
+void snd_trident_stop_voice(struct snd_trident * trident, unsigned int voice);
+void snd_trident_write_voice_regs(struct snd_trident * trident, struct snd_trident_voice *voice);
+int snd_trident_suspend(struct pci_dev *pci, pm_message_t state);
+int snd_trident_resume(struct pci_dev *pci);
+
+/* TLB memory allocation */
+struct snd_util_memblk *snd_trident_alloc_pages(struct snd_trident *trident,
+						struct snd_pcm_substream *substream);
+int snd_trident_free_pages(struct snd_trident *trident, struct snd_util_memblk *blk);
+struct snd_util_memblk *snd_trident_synth_alloc(struct snd_trident *trident, unsigned int size);
+int snd_trident_synth_free(struct snd_trident *trident, struct snd_util_memblk *blk);
+int snd_trident_synth_copy_from_user(struct snd_trident *trident, struct snd_util_memblk *blk,
+				     int offset, const char __user *data, int size);
+
+#endif /* __SOUND_TRIDENT_H */
diff --git a/include/sound/uda134x.h b/include/sound/uda134x.h
new file mode 100644
index 00000000..e475659b
--- /dev/null
+++ b/include/sound/uda134x.h
@@ -0,0 +1,39 @@
+/*
+ * uda134x.h  --  UDA134x ALSA SoC Codec driver
+ *
+ * Copyright 2007 Dension Audio Systems Ltd.
+ * Author: Zoltan Devai
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _UDA134X_H
+#define _UDA134X_H
+
+#include <sound/l3.h>
+
+struct uda134x_platform_data {
+	struct l3_pins l3;
+	void (*power) (int);
+	int model;
+	/*
+	  ALSA SOC usually puts the device in standby mode when it's not used
+	  for sometime. If you unset is_powered_on_standby the driver will
+	  turn off the ADC/DAC when this callback is invoked and turn it back
+	  on when needed. Unfortunately this will result in a very light bump
+	  (it can be audible only with good earphones). If this bothers you
+	  set is_powered_on_standby, you will have slightly higher power
+	  consumption. Please note that sending the L3 command for ADC is
+	  enough to make the bump, so it doesn't make difference if you
+	  completely take off power from the codec.
+	*/
+	int is_powered_on_standby;
+#define UDA134X_UDA1340 1
+#define UDA134X_UDA1341 2
+#define UDA134X_UDA1344 3
+#define UDA134X_UDA1345 4
+};
+
+#endif /* _UDA134X_H */
diff --git a/include/sound/uda1380.h b/include/sound/uda1380.h
new file mode 100644
index 00000000..381319c7
--- /dev/null
+++ b/include/sound/uda1380.h
@@ -0,0 +1,22 @@
+/*
+ * UDA1380 ALSA SoC Codec driver
+ *
+ * Copyright 2009 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UDA1380_H
+#define __UDA1380_H
+
+struct uda1380_platform_data {
+	int gpio_power;
+	int gpio_reset;
+	int dac_clk;
+#define UDA1380_DAC_CLK_SYSCLK 0
+#define UDA1380_DAC_CLK_WSPLL  1
+};
+
+#endif /* __UDA1380_H */
diff --git a/include/sound/util_mem.h b/include/sound/util_mem.h
new file mode 100644
index 00000000..a1fb706b
--- /dev/null
+++ b/include/sound/util_mem.h
@@ -0,0 +1,64 @@
+#ifndef __SOUND_UTIL_MEM_H
+#define __SOUND_UTIL_MEM_H
+
+#include <linux/mutex.h>
+/*
+ *  Copyright (C) 2000 Takashi Iwai <tiwai@suse.de>
+ *
+ *  Generic memory management routines for soundcard memory allocation
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+/*
+ * memory block
+ */
+struct snd_util_memblk {
+	unsigned int size;		/* size of this block */
+	unsigned int offset;		/* zero-offset of this block */
+	struct list_head list;		/* link */
+};
+
+#define snd_util_memblk_argptr(blk)	(void*)((char*)(blk) + sizeof(struct snd_util_memblk))
+
+/*
+ * memory management information
+ */
+struct snd_util_memhdr {
+	unsigned int size;		/* size of whole data */
+	struct list_head block;		/* block linked-list header */
+	int nblocks;			/* # of allocated blocks */
+	unsigned int used;		/* used memory size */
+	int block_extra_size;		/* extra data size of chunk */
+	struct mutex block_mutex;	/* lock */
+};
+
+/*
+ * prototypes
+ */
+struct snd_util_memhdr *snd_util_memhdr_new(int memsize);
+void snd_util_memhdr_free(struct snd_util_memhdr *hdr);
+struct snd_util_memblk *snd_util_mem_alloc(struct snd_util_memhdr *hdr, int size);
+int snd_util_mem_free(struct snd_util_memhdr *hdr, struct snd_util_memblk *blk);
+int snd_util_mem_avail(struct snd_util_memhdr *hdr);
+
+/* functions without mutex */
+struct snd_util_memblk *__snd_util_mem_alloc(struct snd_util_memhdr *hdr, int size);
+void __snd_util_mem_free(struct snd_util_memhdr *hdr, struct snd_util_memblk *blk);
+struct snd_util_memblk *__snd_util_memblk_new(struct snd_util_memhdr *hdr,
+					      unsigned int units,
+					      struct list_head *prev);
+
+#endif /* __SOUND_UTIL_MEM_H */
diff --git a/include/sound/version.h b/include/sound/version.h
new file mode 100644
index 00000000..cc75024c
--- /dev/null
+++ b/include/sound/version.h
@@ -0,0 +1,3 @@
+/* include/version.h */
+#define CONFIG_SND_VERSION "1.0.25"
+#define CONFIG_SND_DATE ""
diff --git a/include/sound/vx_core.h b/include/sound/vx_core.h
new file mode 100644
index 00000000..5456343e
--- /dev/null
+++ b/include/sound/vx_core.h
@@ -0,0 +1,557 @@
+/*
+ * Driver for Digigram VX soundcards
+ *
+ * Hardware core part
+ *
+ * Copyright (c) 2002 by Takashi Iwai <tiwai@suse.de>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef __SOUND_VX_COMMON_H
+#define __SOUND_VX_COMMON_H
+
+#include <sound/pcm.h>
+#include <sound/hwdep.h>
+#include <linux/interrupt.h>
+
+#if defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)
+#if !defined(CONFIG_USE_VXLOADER) && !defined(CONFIG_SND_VX_LIB) /* built-in kernel */
+#define SND_VX_FW_LOADER	/* use the standard firmware loader */
+#endif
+#endif
+
+struct firmware;
+struct device;
+
+#define VX_DRIVER_VERSION	0x010000	/* 1.0.0 */
+
+/*
+ */
+#define SIZE_MAX_CMD    0x10
+#define SIZE_MAX_STATUS 0x10
+
+struct vx_rmh {
+	u16	LgCmd;		/* length of the command to send (WORDs) */
+	u16	LgStat;		/* length of the status received (WORDs) */
+	u32	Cmd[SIZE_MAX_CMD];
+	u32	Stat[SIZE_MAX_STATUS];
+	u16	DspStat;	/* status type, RMP_SSIZE_XXX */
+};
+	
+typedef u64 pcx_time_t;
+
+#define VX_MAX_PIPES	16
+#define VX_MAX_PERIODS	32
+#define VX_MAX_CODECS	2
+
+struct vx_ibl_info {
+	int size;	/* the current IBL size (0 = query) in bytes */
+	int max_size;	/* max. IBL size in bytes */
+	int min_size;	/* min. IBL size in bytes */
+	int granularity;	/* granularity */
+};
+
+struct vx_pipe {
+	int number;
+	unsigned int is_capture: 1;
+	unsigned int data_mode: 1;
+	unsigned int running: 1;
+	unsigned int prepared: 1;
+	int channels;
+	unsigned int differed_type;
+	pcx_time_t pcx_time;
+	struct snd_pcm_substream *substream;
+
+	int hbuf_size;		/* H-buffer size in bytes */
+	int buffer_bytes;	/* the ALSA pcm buffer size in bytes */
+	int period_bytes;	/* the ALSA pcm period size in bytes */
+	int hw_ptr;		/* the current hardware pointer in bytes */
+	int position;		/* the current position in frames (playback only) */
+	int transferred;	/* the transferred size (per period) in frames */
+	int align;		/* size of alignment */
+	u64 cur_count;		/* current sample position (for playback) */
+
+	unsigned int references;     /* an output pipe may be used for monitoring and/or playback */
+	struct vx_pipe *monitoring_pipe;  /* pointer to the monitoring pipe (capture pipe only)*/
+
+	struct tasklet_struct start_tq;
+};
+
+struct vx_core;
+
+struct snd_vx_ops {
+	/* low-level i/o */
+	unsigned char (*in8)(struct vx_core *chip, int reg);
+	unsigned int (*in32)(struct vx_core *chip, int reg);
+	void (*out8)(struct vx_core *chip, int reg, unsigned char val);
+	void (*out32)(struct vx_core *chip, int reg, unsigned int val);
+	/* irq */
+	int (*test_and_ack)(struct vx_core *chip);
+	void (*validate_irq)(struct vx_core *chip, int enable);
+	/* codec */
+	void (*write_codec)(struct vx_core *chip, int codec, unsigned int data);
+	void (*akm_write)(struct vx_core *chip, int reg, unsigned int data);
+	void (*reset_codec)(struct vx_core *chip);
+	void (*change_audio_source)(struct vx_core *chip, int src);
+	void (*set_clock_source)(struct vx_core *chp, int src);
+	/* chip init */
+	int (*load_dsp)(struct vx_core *chip, int idx, const struct firmware *fw);
+	void (*reset_dsp)(struct vx_core *chip);
+	void (*reset_board)(struct vx_core *chip, int cold_reset);
+	int (*add_controls)(struct vx_core *chip);
+	/* pcm */
+	void (*dma_write)(struct vx_core *chip, struct snd_pcm_runtime *runtime,
+			  struct vx_pipe *pipe, int count);
+	void (*dma_read)(struct vx_core *chip, struct snd_pcm_runtime *runtime,
+			  struct vx_pipe *pipe, int count);
+};
+
+struct snd_vx_hardware {
+	const char *name;
+	int type;	/* VX_TYPE_XXX */
+
+	/* hardware specs */
+	unsigned int num_codecs;
+	unsigned int num_ins;
+	unsigned int num_outs;
+	unsigned int output_level_max;
+	const unsigned int *output_level_db_scale;
+};
+
+/* hwdep id string */
+#define SND_VX_HWDEP_ID		"VX Loader"
+
+/* hardware type */
+enum {
+	/* VX222 PCI */
+	VX_TYPE_BOARD,		/* old VX222 PCI */
+	VX_TYPE_V2,		/* VX222 V2 PCI */
+	VX_TYPE_MIC,		/* VX222 Mic PCI */
+	/* VX-pocket */
+	VX_TYPE_VXPOCKET,	/* VXpocket V2 */
+	VX_TYPE_VXP440,		/* VXpocket 440 */
+	VX_TYPE_NUMS
+};
+
+/* chip status */
+enum {
+	VX_STAT_XILINX_LOADED	= (1 << 0),	/* devices are registered */
+	VX_STAT_DEVICE_INIT	= (1 << 1),	/* devices are registered */
+	VX_STAT_CHIP_INIT	= (1 << 2),	/* all operational */
+	VX_STAT_IN_SUSPEND	= (1 << 10),	/* in suspend phase */
+	VX_STAT_IS_STALE	= (1 << 15)	/* device is stale */
+};
+
+/* min/max values for analog output for old codecs */
+#define VX_ANALOG_OUT_LEVEL_MAX		0xe3
+
+struct vx_core {
+	/* ALSA stuff */
+	struct snd_card *card;
+	struct snd_pcm *pcm[VX_MAX_CODECS];
+	int type;	/* VX_TYPE_XXX */
+
+	int irq;
+	/* ports are defined externally */
+
+	/* low-level functions */
+	struct snd_vx_hardware *hw;
+	struct snd_vx_ops *ops;
+
+	spinlock_t lock;
+	spinlock_t irq_lock;
+	struct tasklet_struct tq;
+
+	unsigned int chip_status;
+	unsigned int pcm_running;
+
+	struct device *dev;
+	struct snd_hwdep *hwdep;
+
+	struct vx_rmh irq_rmh;	/* RMH used in interrupts */
+
+	unsigned int audio_info; /* see VX_AUDIO_INFO */
+	unsigned int audio_ins;
+	unsigned int audio_outs;
+	struct vx_pipe **playback_pipes;
+	struct vx_pipe **capture_pipes;
+
+	/* clock and audio sources */
+	unsigned int audio_source;	/* current audio input source */
+	unsigned int audio_source_target;
+	unsigned int clock_mode;	/* clock mode (VX_CLOCK_MODE_XXX) */
+	unsigned int clock_source;	/* current clock source (INTERNAL_QUARTZ or UER_SYNC) */
+	unsigned int freq;		/* current frequency */
+	unsigned int freq_detected;	/* detected frequency from digital in */
+	unsigned int uer_detected;	/* VX_UER_MODE_XXX */
+	unsigned int uer_bits;	/* IEC958 status bits */
+	struct vx_ibl_info ibl;	/* IBL information */
+
+	/* mixer setting */
+	int output_level[VX_MAX_CODECS][2];	/* analog output level */
+	int audio_gain[2][4];			/* digital audio level (playback/capture) */
+	unsigned char audio_active[4];		/* mute/unmute on digital playback */
+	int audio_monitor[4];			/* playback hw-monitor level */
+	unsigned char audio_monitor_active[4];	/* playback hw-monitor mute/unmute */
+
+	struct mutex mixer_mutex;
+
+	const struct firmware *firmware[4]; /* loaded firmware data */
+};
+
+
+/*
+ * constructor
+ */
+struct vx_core *snd_vx_create(struct snd_card *card, struct snd_vx_hardware *hw,
+			      struct snd_vx_ops *ops, int extra_size);
+int snd_vx_setup_firmware(struct vx_core *chip);
+int snd_vx_load_boot_image(struct vx_core *chip, const struct firmware *dsp);
+int snd_vx_dsp_boot(struct vx_core *chip, const struct firmware *dsp);
+int snd_vx_dsp_load(struct vx_core *chip, const struct firmware *dsp);
+
+void snd_vx_free_firmware(struct vx_core *chip);
+
+/*
+ * interrupt handler; exported for pcmcia
+ */
+irqreturn_t snd_vx_irq_handler(int irq, void *dev);
+
+/*
+ * lowlevel functions
+ */
+static inline int vx_test_and_ack(struct vx_core *chip)
+{
+	return chip->ops->test_and_ack(chip);
+}
+
+static inline void vx_validate_irq(struct vx_core *chip, int enable)
+{
+	chip->ops->validate_irq(chip, enable);
+}
+
+static inline unsigned char snd_vx_inb(struct vx_core *chip, int reg)
+{
+	return chip->ops->in8(chip, reg);
+}
+
+static inline unsigned int snd_vx_inl(struct vx_core *chip, int reg)
+{
+	return chip->ops->in32(chip, reg);
+}
+
+static inline void snd_vx_outb(struct vx_core *chip, int reg, unsigned char val)
+{
+	chip->ops->out8(chip, reg, val);
+}
+
+static inline void snd_vx_outl(struct vx_core *chip, int reg, unsigned int val)
+{
+	chip->ops->out32(chip, reg, val);
+}
+
+#define vx_inb(chip,reg)	snd_vx_inb(chip, VX_##reg)
+#define vx_outb(chip,reg,val)	snd_vx_outb(chip, VX_##reg,val)
+#define vx_inl(chip,reg)	snd_vx_inl(chip, VX_##reg)
+#define vx_outl(chip,reg,val)	snd_vx_outl(chip, VX_##reg,val)
+
+static inline void vx_reset_dsp(struct vx_core *chip)
+{
+	chip->ops->reset_dsp(chip);
+}
+
+int vx_send_msg(struct vx_core *chip, struct vx_rmh *rmh);
+int vx_send_msg_nolock(struct vx_core *chip, struct vx_rmh *rmh);
+int vx_send_rih(struct vx_core *chip, int cmd);
+int vx_send_rih_nolock(struct vx_core *chip, int cmd);
+
+void vx_reset_codec(struct vx_core *chip, int cold_reset);
+
+/*
+ * check the bit on the specified register
+ * returns zero if a bit matches, or a negative error code.
+ * exported for vxpocket driver
+ */
+int snd_vx_check_reg_bit(struct vx_core *chip, int reg, int mask, int bit, int time);
+#define vx_check_isr(chip,mask,bit,time) snd_vx_check_reg_bit(chip, VX_ISR, mask, bit, time)
+#define vx_wait_isr_bit(chip,bit) vx_check_isr(chip, bit, bit, 200)
+#define vx_wait_for_rx_full(chip) vx_wait_isr_bit(chip, ISR_RX_FULL)
+
+
+/*
+ * pseudo-DMA transfer
+ */
+static inline void vx_pseudo_dma_write(struct vx_core *chip, struct snd_pcm_runtime *runtime,
+				       struct vx_pipe *pipe, int count)
+{
+	chip->ops->dma_write(chip, runtime, pipe, count);
+}
+
+static inline void vx_pseudo_dma_read(struct vx_core *chip, struct snd_pcm_runtime *runtime,
+				      struct vx_pipe *pipe, int count)
+{
+	chip->ops->dma_read(chip, runtime, pipe, count);
+}
+
+
+
+/* error with hardware code,
+ * the return value is -(VX_ERR_MASK | actual-hw-error-code)
+ */
+#define VX_ERR_MASK	0x1000000
+#define vx_get_error(err)	(-(err) & ~VX_ERR_MASK)
+
+
+/*
+ * pcm stuff
+ */
+int snd_vx_pcm_new(struct vx_core *chip);
+void vx_pcm_update_intr(struct vx_core *chip, unsigned int events);
+
+/*
+ * mixer stuff
+ */
+int snd_vx_mixer_new(struct vx_core *chip);
+void vx_toggle_dac_mute(struct vx_core *chip, int mute);
+int vx_sync_audio_source(struct vx_core *chip);
+int vx_set_monitor_level(struct vx_core *chip, int audio, int level, int active);
+
+/*
+ * IEC958 & clock stuff
+ */
+void vx_set_iec958_status(struct vx_core *chip, unsigned int bits);
+int vx_set_clock(struct vx_core *chip, unsigned int freq);
+void vx_set_internal_clock(struct vx_core *chip, unsigned int freq);
+int vx_change_frequency(struct vx_core *chip);
+
+
+/*
+ * PM
+ */
+int snd_vx_suspend(struct vx_core *card, pm_message_t state);
+int snd_vx_resume(struct vx_core *card);
+
+/*
+ * hardware constants
+ */
+
+#define vx_has_new_dsp(chip)	((chip)->type != VX_TYPE_BOARD)
+#define vx_is_pcmcia(chip)	((chip)->type >= VX_TYPE_VXPOCKET)
+
+/* audio input source */
+enum {
+	VX_AUDIO_SRC_DIGITAL,
+	VX_AUDIO_SRC_LINE,
+	VX_AUDIO_SRC_MIC
+};
+
+/* clock source */
+enum {
+	INTERNAL_QUARTZ,
+	UER_SYNC
+};
+
+/* clock mode */
+enum {
+	VX_CLOCK_MODE_AUTO,	/* depending on the current audio source */
+	VX_CLOCK_MODE_INTERNAL,	/* fixed to internal quartz */
+	VX_CLOCK_MODE_EXTERNAL	/* fixed to UER sync */
+};
+
+/* SPDIF/UER type */
+enum {
+	VX_UER_MODE_CONSUMER,
+	VX_UER_MODE_PROFESSIONAL,
+	VX_UER_MODE_NOT_PRESENT,
+};
+
+/* register indices */
+enum {
+	VX_ICR,
+	VX_CVR,
+	VX_ISR,
+	VX_IVR,
+	VX_RXH,
+	VX_TXH = VX_RXH,
+	VX_RXM,
+	VX_TXM = VX_RXM,
+	VX_RXL,
+	VX_TXL = VX_RXL,
+	VX_DMA,
+	VX_CDSP,
+	VX_RFREQ,
+	VX_RUER_V2,
+	VX_GAIN,
+	VX_DATA = VX_GAIN,
+	VX_MEMIRQ,
+	VX_ACQ,
+	VX_BIT0,
+	VX_BIT1,
+	VX_MIC0,
+	VX_MIC1,
+	VX_MIC2,
+	VX_MIC3,
+	VX_PLX0,
+	VX_PLX1,
+	VX_PLX2,
+
+	VX_LOFREQ,  // V2: ACQ, VP: RFREQ
+	VX_HIFREQ,  // V2: BIT0, VP: RUER_V2
+	VX_CSUER,   // V2: BIT1, VP: BIT0
+	VX_RUER,    // V2: RUER_V2, VP: BIT1
+
+	VX_REG_MAX,
+
+	/* aliases for VX board */
+	VX_RESET_DMA = VX_ISR,
+	VX_CFG = VX_RFREQ,
+	VX_STATUS = VX_MEMIRQ,
+	VX_SELMIC = VX_MIC0,
+	VX_COMPOT = VX_MIC1,
+	VX_SCOMPR = VX_MIC2,
+	VX_GLIMIT = VX_MIC3,
+	VX_INTCSR = VX_PLX0,
+	VX_CNTRL = VX_PLX1,
+	VX_GPIOC = VX_PLX2,
+
+	/* aliases for VXPOCKET board */
+	VX_MICRO = VX_MEMIRQ,
+	VX_CODEC2 = VX_MEMIRQ,
+	VX_DIALOG = VX_ACQ,
+
+};
+
+/* RMH status type */
+enum {
+	RMH_SSIZE_FIXED = 0,	/* status size given by the driver (in LgStat) */
+	RMH_SSIZE_ARG = 1,	/* status size given in the LSB byte */
+	RMH_SSIZE_MASK = 2,	/* status size given in bitmask */
+};
+
+
+/* bits for ICR register */
+#define ICR_HF1		0x10
+#define ICR_HF0		0x08
+#define ICR_TREQ	0x02	/* Interrupt mode + HREQ set on for transfer (->DSP) request */
+#define ICR_RREQ	0x01	/* Interrupt mode + RREQ set on for transfer (->PC) request */
+
+/* bits for CVR register */
+#define CVR_HC		0x80
+
+/* bits for ISR register */
+#define ISR_HF3		0x10
+#define ISR_HF2		0x08
+#define ISR_CHK		0x10
+#define ISR_ERR		0x08
+#define ISR_TX_READY	0x04
+#define ISR_TX_EMPTY	0x02
+#define ISR_RX_FULL	0x01
+
+/* Constants used to access the DATA register */
+#define VX_DATA_CODEC_MASK	0x80
+#define VX_DATA_XICOR_MASK	0x80
+
+/* Constants used to access the CSUER register (both for VX2 and VXP) */
+#define VX_SUER_FREQ_MASK		0x0c
+#define VX_SUER_FREQ_32KHz_MASK		0x0c
+#define VX_SUER_FREQ_44KHz_MASK		0x00
+#define VX_SUER_FREQ_48KHz_MASK		0x04
+#define VX_SUER_DATA_PRESENT_MASK	0x02
+#define VX_SUER_CLOCK_PRESENT_MASK	0x01
+
+#define VX_CUER_HH_BITC_SEL_MASK	0x08
+#define VX_CUER_MH_BITC_SEL_MASK	0x04
+#define VX_CUER_ML_BITC_SEL_MASK	0x02
+#define VX_CUER_LL_BITC_SEL_MASK	0x01
+
+#define XX_UER_CBITS_OFFSET_MASK	0x1f
+
+
+/* bits for audio_info */
+#define VX_AUDIO_INFO_REAL_TIME	(1<<0)	/* real-time processing available */
+#define VX_AUDIO_INFO_OFFLINE	(1<<1)	/* offline processing available */
+#define VX_AUDIO_INFO_MPEG1	(1<<5)
+#define VX_AUDIO_INFO_MPEG2	(1<<6)
+#define VX_AUDIO_INFO_LINEAR_8	(1<<7)
+#define VX_AUDIO_INFO_LINEAR_16	(1<<8)
+#define VX_AUDIO_INFO_LINEAR_24	(1<<9)
+
+/* DSP Interrupt Request values */
+#define VXP_IRQ_OFFSET		0x40 /* add 0x40 offset for vxpocket and vx222/v2 */
+/* call with vx_send_irq_dsp() */
+#define IRQ_MESS_WRITE_END          0x30
+#define IRQ_MESS_WRITE_NEXT         0x32
+#define IRQ_MESS_READ_NEXT          0x34
+#define IRQ_MESS_READ_END           0x36
+#define IRQ_MESSAGE                 0x38
+#define IRQ_RESET_CHK               0x3A
+#define IRQ_CONNECT_STREAM_NEXT     0x26
+#define IRQ_CONNECT_STREAM_END      0x28
+#define IRQ_PAUSE_START_CONNECT     0x2A
+#define IRQ_END_CONNECTION          0x2C
+
+/* Is there async. events pending ( IT Source Test ) */
+#define ASYNC_EVENTS_PENDING            0x008000
+#define HBUFFER_EVENTS_PENDING          0x004000   // Not always accurate
+#define NOTIF_EVENTS_PENDING            0x002000
+#define TIME_CODE_EVENT_PENDING         0x001000
+#define FREQUENCY_CHANGE_EVENT_PENDING  0x000800
+#define END_OF_BUFFER_EVENTS_PENDING    0x000400
+#define FATAL_DSP_ERROR                 0xff0000
+
+/* Stream Format Header Defines */ 
+#define HEADER_FMT_BASE			0xFED00000
+#define HEADER_FMT_MONO			0x000000C0
+#define HEADER_FMT_INTEL		0x00008000
+#define HEADER_FMT_16BITS		0x00002000
+#define HEADER_FMT_24BITS		0x00004000
+#define HEADER_FMT_UPTO11		0x00000200	/* frequency is less or equ. to 11k.*/
+#define HEADER_FMT_UPTO32		0x00000100	/* frequency is over 11k and less then 32k.*/
+
+/* Constants used to access the Codec */
+#define XX_CODEC_SELECTOR               0x20
+/* codec commands */
+#define XX_CODEC_ADC_CONTROL_REGISTER   0x01
+#define XX_CODEC_DAC_CONTROL_REGISTER   0x02
+#define XX_CODEC_LEVEL_LEFT_REGISTER    0x03
+#define XX_CODEC_LEVEL_RIGHT_REGISTER   0x04
+#define XX_CODEC_PORT_MODE_REGISTER     0x05
+#define XX_CODEC_STATUS_REPORT_REGISTER 0x06
+#define XX_CODEC_CLOCK_CONTROL_REGISTER 0x07
+
+/*
+ * Audio-level control values
+ */
+#define CVAL_M110DB		0x000	/* -110dB */
+#define CVAL_M99DB		0x02C
+#define CVAL_M21DB		0x163
+#define CVAL_M18DB		0x16F
+#define CVAL_M10DB		0x18F
+#define CVAL_0DB		0x1B7
+#define CVAL_18DB		0x1FF	/* +18dB */
+#define CVAL_MAX		0x1FF
+
+#define AUDIO_IO_HAS_MUTE_LEVEL			0x400000
+#define AUDIO_IO_HAS_MUTE_MONITORING_1		0x200000
+#define AUDIO_IO_HAS_MUTE_MONITORING_2		0x100000
+#define VALID_AUDIO_IO_DIGITAL_LEVEL		0x01
+#define VALID_AUDIO_IO_MONITORING_LEVEL		0x02
+#define VALID_AUDIO_IO_MUTE_LEVEL		0x04
+#define VALID_AUDIO_IO_MUTE_MONITORING_1	0x08
+#define VALID_AUDIO_IO_MUTE_MONITORING_2	0x10
+
+
+#endif /* __SOUND_VX_COMMON_H */
diff --git a/include/sound/wavefront.h b/include/sound/wavefront.h
new file mode 100644
index 00000000..15d82e59
--- /dev/null
+++ b/include/sound/wavefront.h
@@ -0,0 +1,695 @@
+#ifndef __SOUND_WAVEFRONT_H__
+#define __SOUND_WAVEFRONT_H__
+
+/*
+ *  Driver for Turtle Beach Wavefront cards (Maui,Tropez,Tropez+)
+ *
+ *  Copyright (c) by Paul Barton-Davis <pbd@op.net>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#if (!defined(__GNUC__) && !defined(__GNUG__))
+
+     You will not be able to compile this file correctly without gcc, because
+     it is necessary to pack the "wavefront_alias" structure to a size
+     of 22 bytes, corresponding to 16-bit alignment (as would have been
+     the case on the original platform, MS-DOS). If this is not done,
+     then WavePatch-format files cannot be read/written correctly.
+     The method used to do this here ("__attribute__((packed)") is
+     completely compiler dependent.
+     
+     All other wavefront_* types end up aligned to 32 bit values and
+     still have the same (correct) size.
+
+#else
+
+     /* However, note that as of G++ 2.7.3.2, g++ was unable to
+	correctly parse *type* __attribute__ tags. It will do the
+	right thing if we use the "packed" attribute on each struct
+	member, which has the same semantics anyway. 
+     */
+
+#endif /* __GNUC__ */
+
+/***************************** WARNING ********************************
+  PLEASE DO NOT MODIFY THIS FILE IN ANY WAY THAT AFFECTS ITS ABILITY TO 
+  BE USED WITH EITHER C *OR* C++.
+ **********************************************************************/
+
+#ifndef NUM_MIDIKEYS 
+#define NUM_MIDIKEYS 128
+#endif  /* NUM_MIDIKEYS */
+
+#ifndef NUM_MIDICHANNELS
+#define NUM_MIDICHANNELS 16
+#endif  /* NUM_MIDICHANNELS */
+
+/* These are very useful/important. the original wavefront interface
+   was developed on a 16 bit system, where sizeof(int) = 2
+   bytes. Defining things like this makes the code much more portable, and
+   easier to understand without having to toggle back and forth
+   between a 16-bit view of the world and a 32-bit one. 
+ */   
+
+#ifndef __KERNEL__
+/* keep them for compatibility */
+typedef short s16;
+typedef unsigned short u16;
+typedef int s32;
+typedef unsigned int u32;
+typedef char s8;
+typedef unsigned char u8;
+typedef s16 INT16;
+typedef u16 UINT16;
+typedef s32 INT32;
+typedef u32 UINT32;
+typedef s8 CHAR8;
+typedef u8 UCHAR8;
+#endif
+
+/* Pseudo-commands not part of the WaveFront command set.
+   These are used for various driver controls and direct
+   hardware control.
+ */
+
+#define WFC_DEBUG_DRIVER                0
+#define WFC_FX_IOCTL                    1
+#define WFC_PATCH_STATUS                2
+#define WFC_PROGRAM_STATUS              3
+#define WFC_SAMPLE_STATUS               4
+#define WFC_DISABLE_INTERRUPTS          5
+#define WFC_ENABLE_INTERRUPTS           6
+#define WFC_INTERRUPT_STATUS            7
+#define WFC_ROMSAMPLES_RDONLY           8
+#define WFC_IDENTIFY_SLOT_TYPE          9
+
+/* Wavefront synth commands
+ */
+
+#define WFC_DOWNLOAD_SAMPLE		0x80
+#define WFC_DOWNLOAD_BLOCK		0x81
+#define WFC_DOWNLOAD_MULTISAMPLE	0x82
+#define WFC_DOWNLOAD_SAMPLE_ALIAS	0x83
+#define WFC_DELETE_SAMPLE		0x84
+#define WFC_REPORT_FREE_MEMORY		0x85
+#define WFC_DOWNLOAD_PATCH		0x86
+#define WFC_DOWNLOAD_PROGRAM		0x87
+#define WFC_SET_SYNTHVOL		0x89
+#define WFC_SET_NVOICES			0x8B
+#define WFC_DOWNLOAD_DRUM		0x90
+#define WFC_GET_SYNTHVOL		0x92
+#define WFC_GET_NVOICES			0x94
+#define WFC_DISABLE_CHANNEL		0x9A
+#define WFC_ENABLE_CHANNEL		0x9B
+#define WFC_MISYNTH_OFF			0x9D
+#define WFC_MISYNTH_ON			0x9E
+#define WFC_FIRMWARE_VERSION		0x9F
+#define WFC_GET_NSAMPLES		0xA0
+#define WFC_DISABLE_DRUM_PROGRAM	0xA2
+#define WFC_UPLOAD_PATCH		0xA3
+#define WFC_UPLOAD_PROGRAM		0xA4
+#define WFC_SET_TUNING			0xA6
+#define WFC_GET_TUNING			0xA7
+#define WFC_VMIDI_ON			0xA8
+#define WFC_VMIDI_OFF			0xA9
+#define WFC_MIDI_STATUS			0xAA
+#define WFC_GET_CHANNEL_STATUS		0xAB
+#define WFC_DOWNLOAD_SAMPLE_HEADER	0xAC
+#define WFC_UPLOAD_SAMPLE_HEADER	0xAD
+#define WFC_UPLOAD_MULTISAMPLE		0xAE
+#define WFC_UPLOAD_SAMPLE_ALIAS		0xAF
+#define WFC_IDENTIFY_SAMPLE_TYPE	0xB0
+#define WFC_DOWNLOAD_EDRUM_PROGRAM	0xB1
+#define WFC_UPLOAD_EDRUM_PROGRAM	0xB2
+#define WFC_SET_EDRUM_CHANNEL		0xB3
+#define WFC_INSTOUT_LEVELS		0xB4
+#define WFC_PEAKOUT_LEVELS		0xB5
+#define WFC_REPORT_CHANNEL_PROGRAMS	0xB6
+#define WFC_HARDWARE_VERSION		0xCF
+#define WFC_UPLOAD_SAMPLE_PARAMS	0xD7
+#define WFC_DOWNLOAD_OS			0xF1
+#define WFC_NOOP                        0xFF
+
+#define WF_MAX_SAMPLE   512
+#define WF_MAX_PATCH    256
+#define WF_MAX_PROGRAM  128
+
+#define WF_SECTION_MAX  44   /* longest OS section length */
+
+/* # of bytes we send to the board when sending it various kinds of
+   substantive data, such as samples, patches and programs.
+*/
+
+#define WF_PROGRAM_BYTES 32
+#define WF_PATCH_BYTES 132
+#define WF_SAMPLE_BYTES 27
+#define WF_SAMPLE_HDR_BYTES 25
+#define WF_ALIAS_BYTES 25
+#define WF_DRUM_BYTES 9
+#define WF_MSAMPLE_BYTES 259 /* (MIDI_KEYS * 2) + 3 */
+
+#define WF_ACK     0x80
+#define WF_DMA_ACK 0x81
+
+/* OR-values for MIDI status bits */
+
+#define WF_MIDI_VIRTUAL_ENABLED 0x1
+#define WF_MIDI_VIRTUAL_IS_EXTERNAL 0x2
+#define WF_MIDI_IN_TO_SYNTH_DISABLED 0x4
+
+/* slot indexes for struct address_info: makes code a little more mnemonic */
+
+#define WF_SYNTH_SLOT         0
+#define WF_INTERNAL_MIDI_SLOT 1
+#define WF_EXTERNAL_MIDI_SLOT 2
+
+/* Magic MIDI bytes used to switch I/O streams on the ICS2115 MPU401
+   emulation. Note these NEVER show up in output from the device and
+   should NEVER be used in input unless Virtual MIDI mode has been 
+   disabled. If they do show up as input, the results are unpredictable.
+*/
+
+#define WF_EXTERNAL_SWITCH  0xFD
+#define WF_INTERNAL_SWITCH  0xF9
+
+/* Debugging flags */
+
+#define WF_DEBUG_CMD 0x1
+#define WF_DEBUG_DATA 0x2
+#define WF_DEBUG_LOAD_PATCH 0x4
+#define WF_DEBUG_IO 0x8
+
+/* WavePatch file format stuff */
+
+#define WF_WAVEPATCH_VERSION     120;  /*  Current version number (1.2)  */
+#define WF_MAX_COMMENT           64    /*  Comment length */
+#define WF_NUM_LAYERS            4
+#define WF_NAME_LENGTH           32
+#define WF_SOURCE_LENGTH         260
+
+#define BankFileID     "Bank"
+#define DrumkitFileID  "DrumKit"
+#define ProgramFileID  "Program"
+
+struct wf_envelope
+{
+    u8 attack_time:7;
+    u8 Unused1:1;
+
+    u8 decay1_time:7;
+    u8 Unused2:1;
+
+    u8 decay2_time:7;
+    u8 Unused3:1;
+
+    u8 sustain_time:7;
+    u8 Unused4:1;
+
+    u8 release_time:7;
+    u8 Unused5:1;
+
+    u8 release2_time:7;
+    u8 Unused6:1;
+
+    s8 attack_level;
+    s8 decay1_level;
+    s8 decay2_level;
+    s8 sustain_level;
+    s8 release_level;
+
+    u8 attack_velocity:7;
+    u8 Unused7:1;
+
+    u8 volume_velocity:7;
+    u8 Unused8:1;
+
+    u8 keyboard_scaling:7;
+    u8 Unused9:1;
+};
+typedef struct wf_envelope wavefront_envelope;
+
+struct wf_lfo
+{
+    u8 sample_number;
+
+    u8 frequency:7;
+    u8 Unused1:1;
+
+    u8 am_src:4;
+    u8 fm_src:4;
+
+    s8 fm_amount;
+    s8 am_amount;
+    s8 start_level;
+    s8 end_level;
+
+    u8 ramp_delay:7;
+    u8 wave_restart:1; /* for LFO2 only */
+
+    u8 ramp_time:7;
+    u8 Unused2:1;
+};
+typedef struct wf_lfo wavefront_lfo;
+
+struct wf_patch
+{
+    s16  frequency_bias;         /*  ** THIS IS IN MOTOROLA FORMAT!! ** */
+
+    u8 amplitude_bias:7;
+    u8 Unused1:1;
+
+    u8 portamento:7;
+    u8 Unused2:1;
+
+    u8 sample_number;
+
+    u8 pitch_bend:4;
+    u8 sample_msb:1;
+    u8 Unused3:3;
+
+    u8 mono:1;
+    u8 retrigger:1;
+    u8 nohold:1;
+    u8 restart:1;
+    u8 filterconfig:2; /* SDK says "not used" */
+    u8 reuse:1;
+    u8 reset_lfo:1;    
+
+    u8 fm_src2:4;
+    u8 fm_src1:4;   
+
+    s8 fm_amount1;
+    s8 fm_amount2;
+
+    u8 am_src:4;
+    u8 Unused4:4;
+
+    s8 am_amount;
+
+    u8 fc1_mode:4;
+    u8 fc2_mode:4;
+
+    s8 fc1_mod_amount;
+    s8 fc1_keyboard_scaling;
+    s8 fc1_bias;
+    s8 fc2_mod_amount;
+    s8 fc2_keyboard_scaling;
+    s8 fc2_bias;
+
+    u8 randomizer:7;
+    u8 Unused5:1;
+
+    struct wf_envelope envelope1;
+    struct wf_envelope envelope2;
+    struct wf_lfo lfo1;
+    struct wf_lfo lfo2;
+};
+typedef struct wf_patch wavefront_patch;
+
+struct wf_layer
+{
+    u8 patch_number;
+
+    u8 mix_level:7;
+    u8 mute:1;
+
+    u8 split_point:7;
+    u8 play_below:1;
+
+    u8 pan_mod_src:2;
+    u8 pan_or_mod:1;
+    u8 pan:4;
+    u8 split_type:1;
+};
+typedef struct wf_layer wavefront_layer;
+
+struct wf_program
+{
+    struct wf_layer layer[WF_NUM_LAYERS];
+};
+typedef struct wf_program wavefront_program;
+
+struct wf_sample_offset
+{
+    s32 Fraction:4;
+    s32 Integer:20;
+    s32 Unused:8;
+};
+typedef struct wf_sample_offset wavefront_sample_offset;          
+     
+/* Sample slot types */
+
+#define WF_ST_SAMPLE      0
+#define WF_ST_MULTISAMPLE 1
+#define WF_ST_ALIAS       2
+#define WF_ST_EMPTY       3
+
+/* pseudo's */
+
+#define WF_ST_DRUM        4
+#define WF_ST_PROGRAM     5
+#define WF_ST_PATCH       6
+#define WF_ST_SAMPLEHDR   7
+
+#define WF_ST_MASK        0xf
+
+/* Flags for slot status. These occupy the upper bits of the same byte
+   as a sample type.
+*/
+
+#define WF_SLOT_USED      0x80   /* XXX don't rely on this being accurate */
+#define WF_SLOT_FILLED    0x40
+#define WF_SLOT_ROM       0x20
+
+#define WF_SLOT_MASK      0xf0
+
+/* channel constants */
+
+#define WF_CH_MONO  0
+#define WF_CH_LEFT  1
+#define WF_CH_RIGHT 2
+
+/* Sample formats */
+
+#define LINEAR_16BIT 0
+#define WHITE_NOISE  1
+#define LINEAR_8BIT  2
+#define MULAW_8BIT   3
+
+#define WF_SAMPLE_IS_8BIT(smpl) ((smpl)->SampleResolution&2)
+
+
+/* 
+
+  Because most/all of the sample data we pass in via pointers has
+  never been copied (just mmap-ed into user space straight from the
+  disk), it would be nice to allow handling of multi-channel sample
+  data without forcing user-level extraction of the relevant bytes.
+  
+  So, we need a way of specifying which channel to use (the WaveFront
+  only handles mono samples in a given slot), and the only way to do
+  this without using some struct other than wavefront_sample as the
+  interface is the awful hack of using the unused bits in a
+  wavefront_sample:
+  
+  Val      Meaning
+  ---      -------
+  0        no channel selection (use channel 1, sample is MONO)
+  1        use first channel, and skip one
+  2        use second channel, and skip one
+  3        use third channel, and skip two
+  4        use fourth channel, skip three
+  5        use fifth channel, skip four
+  6        use six channel, skip five
+
+
+  This can handle up to 4 channels, and anyone downloading >4 channels
+  of sample data just to select one of them needs to find some tools
+  like sox ...
+
+  NOTE: values 0, 1 and 2 correspond to WF_CH_* above. This is 
+  important.
+
+*/
+
+#define WF_SET_CHANNEL(samp,chn) \
+ (samp)->Unused1 = chn & 0x1; \
+ (samp)->Unused2 = chn & 0x2; \
+ (samp)->Unused3 = chn & 0x4 
+  
+#define WF_GET_CHANNEL(samp) \
+  (((samp)->Unused3 << 2)|((samp)->Unused2<<1)|(samp)->Unused1)
+  
+typedef struct wf_sample {
+    struct wf_sample_offset sampleStartOffset;
+    struct wf_sample_offset loopStartOffset;
+    struct wf_sample_offset loopEndOffset;
+    struct wf_sample_offset sampleEndOffset;
+    s16 FrequencyBias;
+    u8 SampleResolution:2;  /* sample_format */
+    u8 Unused1:1;
+    u8 Loop:1;
+    u8 Bidirectional:1;
+    u8 Unused2:1;
+    u8 Reverse:1;
+    u8 Unused3:1;
+} wavefront_sample;
+
+typedef struct wf_multisample {
+    s16 NumberOfSamples;   /* log2 of the number of samples */
+    s16 SampleNumber[NUM_MIDIKEYS];
+} wavefront_multisample;
+
+typedef struct wf_alias {
+    s16 OriginalSample;
+
+    struct wf_sample_offset sampleStartOffset;
+    struct wf_sample_offset loopStartOffset;
+    struct wf_sample_offset sampleEndOffset;
+    struct wf_sample_offset loopEndOffset;
+
+    s16  FrequencyBias;
+
+    u8 SampleResolution:2;
+    u8 Unused1:1;
+    u8 Loop:1;
+    u8 Bidirectional:1;
+    u8 Unused2:1;
+    u8 Reverse:1;
+    u8 Unused3:1;
+    
+    /* This structure is meant to be padded only to 16 bits on their
+       original. Of course, whoever wrote their documentation didn't
+       realize that sizeof(struct) can be >=
+       sum(sizeof(struct-fields)) and so thought that giving a C level
+       description of the structs used in WavePatch files was
+       sufficient. I suppose it was, as long as you remember the 
+       standard 16->32 bit issues.
+    */
+
+    u8 sixteen_bit_padding;
+} __attribute__((packed)) wavefront_alias;
+
+typedef struct wf_drum {
+    u8 PatchNumber;
+    u8 MixLevel:7;
+    u8 Unmute:1;
+    u8 Group:4;
+    u8 Unused1:4;
+    u8 PanModSource:2;
+    u8 PanModulated:1;
+    u8 PanAmount:4;
+    u8 Unused2:1;
+} wavefront_drum;
+
+typedef struct wf_drumkit {
+    struct wf_drum drum[NUM_MIDIKEYS];
+} wavefront_drumkit;
+
+typedef struct wf_channel_programs {
+    u8 Program[NUM_MIDICHANNELS];
+} wavefront_channel_programs;
+
+/* How to get MIDI channel status from the data returned by
+   a WFC_GET_CHANNEL_STATUS command (a struct wf_channel_programs)
+*/
+
+#define WF_CHANNEL_STATUS(ch,wcp) (wcp)[(ch/7)] & (1<<((ch)%7))
+
+typedef union wf_any {
+    wavefront_sample s;
+    wavefront_multisample ms;
+    wavefront_alias a;
+    wavefront_program pr;
+    wavefront_patch p;
+    wavefront_drum d;
+} wavefront_any;
+
+/* Hannu Solvainen hoped that his "patch_info" struct in soundcard.h
+   might work for other wave-table based patch loading situations.
+   Alas, his fears were correct. The WaveFront doesn't even come with
+   just "patches", but several different kind of structures that
+   control the sound generation process.
+ */
+
+typedef struct wf_patch_info {
+    
+    /* the first two fields are used by the OSS "patch loading" interface
+       only, and are unused by the current user-level library.
+    */
+
+    s16   key;               /* Use WAVEFRONT_PATCH here */
+    u16  devno;             /* fill in when sending */
+    u8  subkey;            /* WF_ST_{SAMPLE,ALIAS,etc.} */
+
+#define WAVEFRONT_FIND_FREE_SAMPLE_SLOT 999
+
+    u16  number;            /* patch/sample/prog number */
+
+    u32  size;              /* size of any data included in 
+				  one of the fields in `hdrptr', or
+				  as `dataptr'.
+
+				  NOTE: for actual samples, this is
+				  the size of the *SELECTED CHANNEL*
+				  even if more data is actually available.
+				  
+				  So, a stereo sample (2 channels) of
+				  6000 bytes total has `size' = 3000.
+
+				  See the macros and comments for
+				  WF_{GET,SET}_CHANNEL above.
+
+			       */
+    wavefront_any __user *hdrptr;      /* user-space ptr to hdr bytes */
+    u16 __user *dataptr;            /* actual sample data */
+
+    wavefront_any hdr;          /* kernel-space copy of hdr bytes */         
+} wavefront_patch_info;
+
+/* The maximum number of bytes we will ever move to or from user space
+   in response to a WFC_* command.  This obviously doesn't cover
+   actual sample data.
+*/
+
+#define WF_MAX_READ sizeof(wavefront_multisample)
+#define WF_MAX_WRITE sizeof(wavefront_multisample)
+
+/*
+   This allows us to execute any WF command except the download/upload
+   ones, which are handled differently due to copyin/copyout issues as
+   well as data-nybbling to/from the card.
+ */
+
+typedef struct wavefront_control {
+    int cmd;                           /* WFC_* */
+    char status;                       /* return status to user-space */
+    unsigned char rbuf[WF_MAX_READ];   /* bytes read from card */
+    unsigned char wbuf[WF_MAX_WRITE];  /* bytes written to card */
+} wavefront_control;
+
+#define WFCTL_WFCMD    0x1
+#define WFCTL_LOAD_SPP 0x2
+
+/* Modulator table */
+
+#define WF_MOD_LFO1      0
+#define WF_MOD_LFO2      1
+#define WF_MOD_ENV1      2
+#define WF_MOD_ENV2      3
+#define WF_MOD_KEYBOARD  4
+#define WF_MOD_LOGKEY    5
+#define WF_MOD_VELOCITY  6
+#define WF_MOD_LOGVEL    7
+#define WF_MOD_RANDOM    8
+#define WF_MOD_PRESSURE  9
+#define WF_MOD_MOD_WHEEL 10
+#define WF_MOD_1         WF_MOD_MOD_WHEEL 
+#define WF_MOD_BREATH    11
+#define WF_MOD_2         WF_MOD_BREATH
+#define WF_MOD_FOOT      12
+#define WF_MOD_4         WF_MOD_FOOT
+#define WF_MOD_VOLUME    13
+#define WF_MOD_7         WF_MOD_VOLUME
+#define WF_MOD_PAN       14
+#define WF_MOD_10        WF_MOD_PAN
+#define WF_MOD_EXPR      15
+#define WF_MOD_11        WF_MOD_EXPR
+
+/* FX-related material */
+
+typedef struct wf_fx_info {
+    int request;             /* see list below */
+    long data[4];             /* we don't need much */
+} wavefront_fx_info;
+
+/* support for each of these will be forthcoming once I or someone 
+   else has figured out which of the addresses on page 6 and page 7 of 
+   the YSS225 control each parameter. Incidentally, these come from
+   the Windows driver interface, but again, Turtle Beach didn't
+   document the API to use them.
+*/
+
+#define WFFX_SETOUTGAIN		        0
+#define WFFX_SETSTEREOOUTGAIN		1
+#define WFFX_SETREVERBIN1GAIN		2
+#define WFFX_SETREVERBIN2GAIN		3
+#define WFFX_SETREVERBIN3GAIN		4
+#define WFFX_SETCHORUSINPORT		5
+#define WFFX_SETREVERBIN1PORT		6
+#define WFFX_SETREVERBIN2PORT		7
+#define WFFX_SETREVERBIN3PORT		8
+#define WFFX_SETEFFECTPORT		9
+#define WFFX_SETAUXPORT		        10
+#define WFFX_SETREVERBTYPE		11
+#define WFFX_SETREVERBDELAY		12
+#define WFFX_SETCHORUSLFO		13
+#define WFFX_SETCHORUSPMD		14
+#define WFFX_SETCHORUSAMD		15
+#define WFFX_SETEFFECT		        16
+#define WFFX_SETBASEALL		        17
+#define WFFX_SETREVERBALL		18
+#define WFFX_SETCHORUSALL		20
+#define WFFX_SETREVERBDEF		22
+#define WFFX_SETCHORUSDEF		23
+#define WFFX_DELAYSETINGAIN		24
+#define WFFX_DELAYSETFBGAIN	        25
+#define WFFX_DELAYSETFBLPF		26
+#define WFFX_DELAYSETGAIN		27
+#define WFFX_DELAYSETTIME		28
+#define WFFX_DELAYSETFBTIME		29
+#define WFFX_DELAYSETALL		30
+#define WFFX_DELAYSETDEF		32
+#define WFFX_SDELAYSETINGAIN		33
+#define WFFX_SDELAYSETFBGAIN		34
+#define WFFX_SDELAYSETFBLPF		35
+#define WFFX_SDELAYSETGAIN		36
+#define WFFX_SDELAYSETTIME		37
+#define WFFX_SDELAYSETFBTIME		38
+#define WFFX_SDELAYSETALL		39
+#define WFFX_SDELAYSETDEF		41
+#define WFFX_DEQSETINGAIN		42
+#define WFFX_DEQSETFILTER		43
+#define WFFX_DEQSETALL		        44
+#define WFFX_DEQSETDEF		        46
+#define WFFX_MUTE		        47
+#define WFFX_FLANGESETBALANCE	        48	
+#define WFFX_FLANGESETDELAY		49
+#define WFFX_FLANGESETDWFFX_TH		50
+#define WFFX_FLANGESETFBGAIN		51
+#define WFFX_FLANGESETINGAIN		52
+#define WFFX_FLANGESETLFO		53
+#define WFFX_FLANGESETALL		54
+#define WFFX_FLANGESETDEF		56
+#define WFFX_PITCHSETSHIFT		57
+#define WFFX_PITCHSETBALANCE		58
+#define WFFX_PITCHSETALL		59
+#define WFFX_PITCHSETDEF		61
+#define WFFX_SRSSETINGAIN		62
+#define WFFX_SRSSETSPACE		63
+#define WFFX_SRSSETCENTER		64
+#define WFFX_SRSSETGAIN		        65
+#define WFFX_SRSSETMODE	        	66
+#define WFFX_SRSSETDEF		        68
+
+/* Allow direct user-space control over FX memory/coefficient data.
+   In theory this could be used to download the FX microprogram,
+   but it would be a little slower, and involve some weird code.
+ */
+
+#define WFFX_MEMSET              69
+
+#endif /* __SOUND_WAVEFRONT_H__ */
diff --git a/include/sound/wm1250-ev1.h b/include/sound/wm1250-ev1.h
new file mode 100644
index 00000000..7dff8283
--- /dev/null
+++ b/include/sound/wm1250-ev1.h
@@ -0,0 +1,27 @@
+/*
+ * linux/sound/wm1250-ev1.h - Platform data for WM1250-EV1
+ *
+ * Copyright 2011 Wolfson Microelectronics. PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_WM1250_EV1_H
+#define __LINUX_SND_WM1250_EV1_H
+
+#define WM1250_EV1_NUM_GPIOS 5
+
+#define WM1250_EV1_GPIO_CLK_ENA  0
+#define WM1250_EV1_GPIO_CLK_SEL0 1
+#define WM1250_EV1_GPIO_CLK_SEL1 2
+#define WM1250_EV1_GPIO_OSR      3
+#define WM1250_EV1_GPIO_MASTER   4
+
+
+struct wm1250_ev1_pdata {
+	int gpios[WM1250_EV1_NUM_GPIOS];
+};
+
+#endif
diff --git a/include/sound/wm2000.h b/include/sound/wm2000.h
new file mode 100644
index 00000000..aa388ca9
--- /dev/null
+++ b/include/sound/wm2000.h
@@ -0,0 +1,26 @@
+/*
+ * linux/sound/wm2000.h -- Platform data for WM2000
+ *
+ * Copyright 2010 Wolfson Microelectronics. PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_WM2000_H
+#define __LINUX_SND_WM2000_H
+
+struct wm2000_platform_data {
+	/** Filename for system-specific image to download to device. */
+	const char *download_file;
+
+	/** Divide MCLK by 2 for system clock? */
+	unsigned int mclkdiv2:1;
+
+	/** Disable speech clarity enhancement, for use when an
+	 * external algorithm is used. */
+	unsigned int speech_enh_disable:1;
+};
+
+#endif
diff --git a/include/sound/wm2200.h b/include/sound/wm2200.h
new file mode 100644
index 00000000..79bf55be
--- /dev/null
+++ b/include/sound/wm2200.h
@@ -0,0 +1,41 @@
+/*
+ * linux/sound/wm2200.h -- Platform data for WM2200
+ *
+ * Copyright 2012 Wolfson Microelectronics. PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_WM2200_H
+#define __LINUX_SND_WM2200_H
+
+#define WM2200_GPIO_SET 0x10000
+
+enum wm2200_in_mode {
+	WM2200_IN_SE = 0,
+	WM2200_IN_DIFF = 1,
+	WM2200_IN_DMIC = 2,
+};
+
+enum wm2200_dmic_sup {
+	WM2200_DMIC_SUP_MICVDD = 0,
+	WM2200_DMIC_SUP_MICBIAS1 = 1,
+	WM2200_DMIC_SUP_MICBIAS2 = 2,
+};
+
+struct wm2200_pdata {
+	int reset;      /** GPIO controlling /RESET, if any */
+	int ldo_ena;    /** GPIO controlling LODENA, if any */
+	int irq_flags;
+
+	int gpio_defaults[4];
+
+	enum wm2200_in_mode in_mode[3];
+	enum wm2200_dmic_sup dmic_sup[3];
+
+	int micbias_cfg[2];  /** Register value to configure MICBIAS */
+};
+
+#endif
diff --git a/include/sound/wm5100.h b/include/sound/wm5100.h
new file mode 100644
index 00000000..617d0c4a
--- /dev/null
+++ b/include/sound/wm5100.h
@@ -0,0 +1,59 @@
+/*
+ * linux/sound/wm5100.h -- Platform data for WM5100
+ *
+ * Copyright 2011 Wolfson Microelectronics. PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_WM5100_H
+#define __LINUX_SND_WM5100_H
+
+enum wm5100_in_mode {
+	WM5100_IN_SE = 0,
+	WM5100_IN_DIFF = 1,
+	WM5100_IN_DMIC = 2,
+};
+
+enum wm5100_dmic_sup {
+	WM5100_DMIC_SUP_MICVDD = 0,
+	WM5100_DMIC_SUP_MICBIAS1 = 1,
+	WM5100_DMIC_SUP_MICBIAS2 = 2,
+	WM5100_DMIC_SUP_MICBIAS3 = 3,
+};
+
+enum wm5100_micdet_bias {
+	WM5100_MICDET_MICBIAS1 = 0,
+	WM5100_MICDET_MICBIAS2 = 1,
+	WM5100_MICDET_MICBIAS3 = 2,
+};
+
+struct wm5100_jack_mode {
+	enum wm5100_micdet_bias bias;
+	int hp_pol;
+	int micd_src;
+};
+
+#define WM5100_GPIO_SET 0x10000
+
+struct wm5100_pdata {
+	int reset;      /** GPIO controlling /RESET, if any */
+	int ldo_ena;    /** GPIO controlling LODENA, if any */
+	int hp_pol;     /** GPIO controlling headset polarity, if any */
+	int irq_flags;
+	int gpio_base;
+
+	struct wm5100_jack_mode jack_modes[2];
+
+	/* Input pin mode selection */
+	enum wm5100_in_mode in_mode[4];
+
+	/* DMIC supply selection */
+	enum wm5100_dmic_sup dmic_sup[4];
+
+	int gpio_defaults[6];
+};
+
+#endif
diff --git a/include/sound/wm8903.h b/include/sound/wm8903.h
new file mode 100644
index 00000000..b310c5a3
--- /dev/null
+++ b/include/sound/wm8903.h
@@ -0,0 +1,266 @@
+/*
+ * linux/sound/wm8903.h -- Platform data for WM8903
+ *
+ * Copyright 2010 Wolfson Microelectronics. PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_WM8903_H
+#define __LINUX_SND_WM8903_H
+
+/*
+ * Used to enable configuration of a GPIO to all zeros; a gpio_cfg value of
+ * zero in platform data means "don't touch this pin".
+ */
+#define WM8903_GPIO_CONFIG_ZERO 0x8000
+
+/*
+ * R6 (0x06) - Mic Bias Control 0
+ */
+#define WM8903_MICDET_THR_MASK                  0x0030  /* MICDET_THR - [5:4] */
+#define WM8903_MICDET_THR_SHIFT                      4  /* MICDET_THR - [5:4] */
+#define WM8903_MICDET_THR_WIDTH                      2  /* MICDET_THR - [5:4] */
+#define WM8903_MICSHORT_THR_MASK                0x000C  /* MICSHORT_THR - [3:2] */
+#define WM8903_MICSHORT_THR_SHIFT                    2  /* MICSHORT_THR - [3:2] */
+#define WM8903_MICSHORT_THR_WIDTH                    2  /* MICSHORT_THR - [3:2] */
+#define WM8903_MICDET_ENA                       0x0002  /* MICDET_ENA */
+#define WM8903_MICDET_ENA_MASK                  0x0002  /* MICDET_ENA */
+#define WM8903_MICDET_ENA_SHIFT                      1  /* MICDET_ENA */
+#define WM8903_MICDET_ENA_WIDTH                      1  /* MICDET_ENA */
+#define WM8903_MICBIAS_ENA                      0x0001  /* MICBIAS_ENA */
+#define WM8903_MICBIAS_ENA_MASK                 0x0001  /* MICBIAS_ENA */
+#define WM8903_MICBIAS_ENA_SHIFT                     0  /* MICBIAS_ENA */
+#define WM8903_MICBIAS_ENA_WIDTH                     1  /* MICBIAS_ENA */
+
+/*
+ * WM8903_GPn_FN values
+ *
+ * See datasheets for list of valid values per pin
+ */
+#define WM8903_GPn_FN_GPIO_OUTPUT                    0
+#define WM8903_GPn_FN_BCLK                           1
+#define WM8903_GPn_FN_IRQ_OUTPT                      2
+#define WM8903_GPn_FN_GPIO_INPUT                     3
+#define WM8903_GPn_FN_MICBIAS_CURRENT_DETECT         4
+#define WM8903_GPn_FN_MICBIAS_SHORT_DETECT           5
+#define WM8903_GPn_FN_DMIC_LR_CLK_OUTPUT             6
+#define WM8903_GPn_FN_FLL_LOCK_OUTPUT                8
+#define WM8903_GPn_FN_FLL_CLOCK_OUTPUT               9
+
+/*
+ * R116 (0x74) - GPIO Control 1
+ */
+#define WM8903_GP1_FN_MASK                      0x1F00  /* GP1_FN - [12:8] */
+#define WM8903_GP1_FN_SHIFT                          8  /* GP1_FN - [12:8] */
+#define WM8903_GP1_FN_WIDTH                          5  /* GP1_FN - [12:8] */
+#define WM8903_GP1_DIR                          0x0080  /* GP1_DIR */
+#define WM8903_GP1_DIR_MASK                     0x0080  /* GP1_DIR */
+#define WM8903_GP1_DIR_SHIFT                         7  /* GP1_DIR */
+#define WM8903_GP1_DIR_WIDTH                         1  /* GP1_DIR */
+#define WM8903_GP1_OP_CFG                       0x0040  /* GP1_OP_CFG */
+#define WM8903_GP1_OP_CFG_MASK                  0x0040  /* GP1_OP_CFG */
+#define WM8903_GP1_OP_CFG_SHIFT                      6  /* GP1_OP_CFG */
+#define WM8903_GP1_OP_CFG_WIDTH                      1  /* GP1_OP_CFG */
+#define WM8903_GP1_IP_CFG                       0x0020  /* GP1_IP_CFG */
+#define WM8903_GP1_IP_CFG_MASK                  0x0020  /* GP1_IP_CFG */
+#define WM8903_GP1_IP_CFG_SHIFT                      5  /* GP1_IP_CFG */
+#define WM8903_GP1_IP_CFG_WIDTH                      1  /* GP1_IP_CFG */
+#define WM8903_GP1_LVL                          0x0010  /* GP1_LVL */
+#define WM8903_GP1_LVL_MASK                     0x0010  /* GP1_LVL */
+#define WM8903_GP1_LVL_SHIFT                         4  /* GP1_LVL */
+#define WM8903_GP1_LVL_WIDTH                         1  /* GP1_LVL */
+#define WM8903_GP1_PD                           0x0008  /* GP1_PD */
+#define WM8903_GP1_PD_MASK                      0x0008  /* GP1_PD */
+#define WM8903_GP1_PD_SHIFT                          3  /* GP1_PD */
+#define WM8903_GP1_PD_WIDTH                          1  /* GP1_PD */
+#define WM8903_GP1_PU                           0x0004  /* GP1_PU */
+#define WM8903_GP1_PU_MASK                      0x0004  /* GP1_PU */
+#define WM8903_GP1_PU_SHIFT                          2  /* GP1_PU */
+#define WM8903_GP1_PU_WIDTH                          1  /* GP1_PU */
+#define WM8903_GP1_INTMODE                      0x0002  /* GP1_INTMODE */
+#define WM8903_GP1_INTMODE_MASK                 0x0002  /* GP1_INTMODE */
+#define WM8903_GP1_INTMODE_SHIFT                     1  /* GP1_INTMODE */
+#define WM8903_GP1_INTMODE_WIDTH                     1  /* GP1_INTMODE */
+#define WM8903_GP1_DB                           0x0001  /* GP1_DB */
+#define WM8903_GP1_DB_MASK                      0x0001  /* GP1_DB */
+#define WM8903_GP1_DB_SHIFT                          0  /* GP1_DB */
+#define WM8903_GP1_DB_WIDTH                          1  /* GP1_DB */
+
+/*
+ * R117 (0x75) - GPIO Control 2
+ */
+#define WM8903_GP2_FN_MASK                      0x1F00  /* GP2_FN - [12:8] */
+#define WM8903_GP2_FN_SHIFT                          8  /* GP2_FN - [12:8] */
+#define WM8903_GP2_FN_WIDTH                          5  /* GP2_FN - [12:8] */
+#define WM8903_GP2_DIR                          0x0080  /* GP2_DIR */
+#define WM8903_GP2_DIR_MASK                     0x0080  /* GP2_DIR */
+#define WM8903_GP2_DIR_SHIFT                         7  /* GP2_DIR */
+#define WM8903_GP2_DIR_WIDTH                         1  /* GP2_DIR */
+#define WM8903_GP2_OP_CFG                       0x0040  /* GP2_OP_CFG */
+#define WM8903_GP2_OP_CFG_MASK                  0x0040  /* GP2_OP_CFG */
+#define WM8903_GP2_OP_CFG_SHIFT                      6  /* GP2_OP_CFG */
+#define WM8903_GP2_OP_CFG_WIDTH                      1  /* GP2_OP_CFG */
+#define WM8903_GP2_IP_CFG                       0x0020  /* GP2_IP_CFG */
+#define WM8903_GP2_IP_CFG_MASK                  0x0020  /* GP2_IP_CFG */
+#define WM8903_GP2_IP_CFG_SHIFT                      5  /* GP2_IP_CFG */
+#define WM8903_GP2_IP_CFG_WIDTH                      1  /* GP2_IP_CFG */
+#define WM8903_GP2_LVL                          0x0010  /* GP2_LVL */
+#define WM8903_GP2_LVL_MASK                     0x0010  /* GP2_LVL */
+#define WM8903_GP2_LVL_SHIFT                         4  /* GP2_LVL */
+#define WM8903_GP2_LVL_WIDTH                         1  /* GP2_LVL */
+#define WM8903_GP2_PD                           0x0008  /* GP2_PD */
+#define WM8903_GP2_PD_MASK                      0x0008  /* GP2_PD */
+#define WM8903_GP2_PD_SHIFT                          3  /* GP2_PD */
+#define WM8903_GP2_PD_WIDTH                          1  /* GP2_PD */
+#define WM8903_GP2_PU                           0x0004  /* GP2_PU */
+#define WM8903_GP2_PU_MASK                      0x0004  /* GP2_PU */
+#define WM8903_GP2_PU_SHIFT                          2  /* GP2_PU */
+#define WM8903_GP2_PU_WIDTH                          1  /* GP2_PU */
+#define WM8903_GP2_INTMODE                      0x0002  /* GP2_INTMODE */
+#define WM8903_GP2_INTMODE_MASK                 0x0002  /* GP2_INTMODE */
+#define WM8903_GP2_INTMODE_SHIFT                     1  /* GP2_INTMODE */
+#define WM8903_GP2_INTMODE_WIDTH                     1  /* GP2_INTMODE */
+#define WM8903_GP2_DB                           0x0001  /* GP2_DB */
+#define WM8903_GP2_DB_MASK                      0x0001  /* GP2_DB */
+#define WM8903_GP2_DB_SHIFT                          0  /* GP2_DB */
+#define WM8903_GP2_DB_WIDTH                          1  /* GP2_DB */
+
+/*
+ * R118 (0x76) - GPIO Control 3
+ */
+#define WM8903_GP3_FN_MASK                      0x1F00  /* GP3_FN - [12:8] */
+#define WM8903_GP3_FN_SHIFT                          8  /* GP3_FN - [12:8] */
+#define WM8903_GP3_FN_WIDTH                          5  /* GP3_FN - [12:8] */
+#define WM8903_GP3_DIR                          0x0080  /* GP3_DIR */
+#define WM8903_GP3_DIR_MASK                     0x0080  /* GP3_DIR */
+#define WM8903_GP3_DIR_SHIFT                         7  /* GP3_DIR */
+#define WM8903_GP3_DIR_WIDTH                         1  /* GP3_DIR */
+#define WM8903_GP3_OP_CFG                       0x0040  /* GP3_OP_CFG */
+#define WM8903_GP3_OP_CFG_MASK                  0x0040  /* GP3_OP_CFG */
+#define WM8903_GP3_OP_CFG_SHIFT                      6  /* GP3_OP_CFG */
+#define WM8903_GP3_OP_CFG_WIDTH                      1  /* GP3_OP_CFG */
+#define WM8903_GP3_IP_CFG                       0x0020  /* GP3_IP_CFG */
+#define WM8903_GP3_IP_CFG_MASK                  0x0020  /* GP3_IP_CFG */
+#define WM8903_GP3_IP_CFG_SHIFT                      5  /* GP3_IP_CFG */
+#define WM8903_GP3_IP_CFG_WIDTH                      1  /* GP3_IP_CFG */
+#define WM8903_GP3_LVL                          0x0010  /* GP3_LVL */
+#define WM8903_GP3_LVL_MASK                     0x0010  /* GP3_LVL */
+#define WM8903_GP3_LVL_SHIFT                         4  /* GP3_LVL */
+#define WM8903_GP3_LVL_WIDTH                         1  /* GP3_LVL */
+#define WM8903_GP3_PD                           0x0008  /* GP3_PD */
+#define WM8903_GP3_PD_MASK                      0x0008  /* GP3_PD */
+#define WM8903_GP3_PD_SHIFT                          3  /* GP3_PD */
+#define WM8903_GP3_PD_WIDTH                          1  /* GP3_PD */
+#define WM8903_GP3_PU                           0x0004  /* GP3_PU */
+#define WM8903_GP3_PU_MASK                      0x0004  /* GP3_PU */
+#define WM8903_GP3_PU_SHIFT                          2  /* GP3_PU */
+#define WM8903_GP3_PU_WIDTH                          1  /* GP3_PU */
+#define WM8903_GP3_INTMODE                      0x0002  /* GP3_INTMODE */
+#define WM8903_GP3_INTMODE_MASK                 0x0002  /* GP3_INTMODE */
+#define WM8903_GP3_INTMODE_SHIFT                     1  /* GP3_INTMODE */
+#define WM8903_GP3_INTMODE_WIDTH                     1  /* GP3_INTMODE */
+#define WM8903_GP3_DB                           0x0001  /* GP3_DB */
+#define WM8903_GP3_DB_MASK                      0x0001  /* GP3_DB */
+#define WM8903_GP3_DB_SHIFT                          0  /* GP3_DB */
+#define WM8903_GP3_DB_WIDTH                          1  /* GP3_DB */
+
+/*
+ * R119 (0x77) - GPIO Control 4
+ */
+#define WM8903_GP4_FN_MASK                      0x1F00  /* GP4_FN - [12:8] */
+#define WM8903_GP4_FN_SHIFT                          8  /* GP4_FN - [12:8] */
+#define WM8903_GP4_FN_WIDTH                          5  /* GP4_FN - [12:8] */
+#define WM8903_GP4_DIR                          0x0080  /* GP4_DIR */
+#define WM8903_GP4_DIR_MASK                     0x0080  /* GP4_DIR */
+#define WM8903_GP4_DIR_SHIFT                         7  /* GP4_DIR */
+#define WM8903_GP4_DIR_WIDTH                         1  /* GP4_DIR */
+#define WM8903_GP4_OP_CFG                       0x0040  /* GP4_OP_CFG */
+#define WM8903_GP4_OP_CFG_MASK                  0x0040  /* GP4_OP_CFG */
+#define WM8903_GP4_OP_CFG_SHIFT                      6  /* GP4_OP_CFG */
+#define WM8903_GP4_OP_CFG_WIDTH                      1  /* GP4_OP_CFG */
+#define WM8903_GP4_IP_CFG                       0x0020  /* GP4_IP_CFG */
+#define WM8903_GP4_IP_CFG_MASK                  0x0020  /* GP4_IP_CFG */
+#define WM8903_GP4_IP_CFG_SHIFT                      5  /* GP4_IP_CFG */
+#define WM8903_GP4_IP_CFG_WIDTH                      1  /* GP4_IP_CFG */
+#define WM8903_GP4_LVL                          0x0010  /* GP4_LVL */
+#define WM8903_GP4_LVL_MASK                     0x0010  /* GP4_LVL */
+#define WM8903_GP4_LVL_SHIFT                         4  /* GP4_LVL */
+#define WM8903_GP4_LVL_WIDTH                         1  /* GP4_LVL */
+#define WM8903_GP4_PD                           0x0008  /* GP4_PD */
+#define WM8903_GP4_PD_MASK                      0x0008  /* GP4_PD */
+#define WM8903_GP4_PD_SHIFT                          3  /* GP4_PD */
+#define WM8903_GP4_PD_WIDTH                          1  /* GP4_PD */
+#define WM8903_GP4_PU                           0x0004  /* GP4_PU */
+#define WM8903_GP4_PU_MASK                      0x0004  /* GP4_PU */
+#define WM8903_GP4_PU_SHIFT                          2  /* GP4_PU */
+#define WM8903_GP4_PU_WIDTH                          1  /* GP4_PU */
+#define WM8903_GP4_INTMODE                      0x0002  /* GP4_INTMODE */
+#define WM8903_GP4_INTMODE_MASK                 0x0002  /* GP4_INTMODE */
+#define WM8903_GP4_INTMODE_SHIFT                     1  /* GP4_INTMODE */
+#define WM8903_GP4_INTMODE_WIDTH                     1  /* GP4_INTMODE */
+#define WM8903_GP4_DB                           0x0001  /* GP4_DB */
+#define WM8903_GP4_DB_MASK                      0x0001  /* GP4_DB */
+#define WM8903_GP4_DB_SHIFT                          0  /* GP4_DB */
+#define WM8903_GP4_DB_WIDTH                          1  /* GP4_DB */
+
+/*
+ * R120 (0x78) - GPIO Control 5
+ */
+#define WM8903_GP5_FN_MASK                      0x1F00  /* GP5_FN - [12:8] */
+#define WM8903_GP5_FN_SHIFT                          8  /* GP5_FN - [12:8] */
+#define WM8903_GP5_FN_WIDTH                          5  /* GP5_FN - [12:8] */
+#define WM8903_GP5_DIR                          0x0080  /* GP5_DIR */
+#define WM8903_GP5_DIR_MASK                     0x0080  /* GP5_DIR */
+#define WM8903_GP5_DIR_SHIFT                         7  /* GP5_DIR */
+#define WM8903_GP5_DIR_WIDTH                         1  /* GP5_DIR */
+#define WM8903_GP5_OP_CFG                       0x0040  /* GP5_OP_CFG */
+#define WM8903_GP5_OP_CFG_MASK                  0x0040  /* GP5_OP_CFG */
+#define WM8903_GP5_OP_CFG_SHIFT                      6  /* GP5_OP_CFG */
+#define WM8903_GP5_OP_CFG_WIDTH                      1  /* GP5_OP_CFG */
+#define WM8903_GP5_IP_CFG                       0x0020  /* GP5_IP_CFG */
+#define WM8903_GP5_IP_CFG_MASK                  0x0020  /* GP5_IP_CFG */
+#define WM8903_GP5_IP_CFG_SHIFT                      5  /* GP5_IP_CFG */
+#define WM8903_GP5_IP_CFG_WIDTH                      1  /* GP5_IP_CFG */
+#define WM8903_GP5_LVL                          0x0010  /* GP5_LVL */
+#define WM8903_GP5_LVL_MASK                     0x0010  /* GP5_LVL */
+#define WM8903_GP5_LVL_SHIFT                         4  /* GP5_LVL */
+#define WM8903_GP5_LVL_WIDTH                         1  /* GP5_LVL */
+#define WM8903_GP5_PD                           0x0008  /* GP5_PD */
+#define WM8903_GP5_PD_MASK                      0x0008  /* GP5_PD */
+#define WM8903_GP5_PD_SHIFT                          3  /* GP5_PD */
+#define WM8903_GP5_PD_WIDTH                          1  /* GP5_PD */
+#define WM8903_GP5_PU                           0x0004  /* GP5_PU */
+#define WM8903_GP5_PU_MASK                      0x0004  /* GP5_PU */
+#define WM8903_GP5_PU_SHIFT                          2  /* GP5_PU */
+#define WM8903_GP5_PU_WIDTH                          1  /* GP5_PU */
+#define WM8903_GP5_INTMODE                      0x0002  /* GP5_INTMODE */
+#define WM8903_GP5_INTMODE_MASK                 0x0002  /* GP5_INTMODE */
+#define WM8903_GP5_INTMODE_SHIFT                     1  /* GP5_INTMODE */
+#define WM8903_GP5_INTMODE_WIDTH                     1  /* GP5_INTMODE */
+#define WM8903_GP5_DB                           0x0001  /* GP5_DB */
+#define WM8903_GP5_DB_MASK                      0x0001  /* GP5_DB */
+#define WM8903_GP5_DB_SHIFT                          0  /* GP5_DB */
+#define WM8903_GP5_DB_WIDTH                          1  /* GP5_DB */
+
+#define WM8903_NUM_GPIO 5
+
+struct wm8903_platform_data {
+	bool irq_active_low;   /* Set if IRQ active low, default high */
+
+        /* Default register value for R6 (Mic bias), used to configure
+	 * microphone detection.  In conjunction with gpio_cfg this
+	 * can be used to route the microphone status signals out onto
+	 * the GPIOs for use with snd_soc_jack_add_gpios().
+	 */
+	u16 micdet_cfg;
+
+	int micdet_delay;      /* Delay after microphone detection (ms) */
+
+	int gpio_base;
+	u32 gpio_cfg[WM8903_NUM_GPIO]; /* Default register values for GPIO pin mux */
+};
+
+#endif
diff --git a/include/sound/wm8904.h b/include/sound/wm8904.h
new file mode 100644
index 00000000..898be3a8
--- /dev/null
+++ b/include/sound/wm8904.h
@@ -0,0 +1,163 @@
+/*
+ * Platform data for WM8904
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM8994_PDATA_H__
+#define __MFD_WM8994_PDATA_H__
+
+/* Used to enable configuration of a GPIO to all zeros */
+#define WM8904_GPIO_NO_CONFIG 0x8000
+
+/*
+ * R6 (0x06) - Mic Bias Control 0
+ */
+#define WM8904_MICDET_THR_MASK                  0x0070  /* MICDET_THR - [6:4] */
+#define WM8904_MICDET_THR_SHIFT                      4  /* MICDET_THR - [6:4] */
+#define WM8904_MICDET_THR_WIDTH                      3  /* MICDET_THR - [6:4] */
+#define WM8904_MICSHORT_THR_MASK                0x000C  /* MICSHORT_THR - [3:2] */
+#define WM8904_MICSHORT_THR_SHIFT                    2  /* MICSHORT_THR - [3:2] */
+#define WM8904_MICSHORT_THR_WIDTH                    2  /* MICSHORT_THR - [3:2] */
+#define WM8904_MICDET_ENA                       0x0002  /* MICDET_ENA */
+#define WM8904_MICDET_ENA_MASK                  0x0002  /* MICDET_ENA */
+#define WM8904_MICDET_ENA_SHIFT                      1  /* MICDET_ENA */
+#define WM8904_MICDET_ENA_WIDTH                      1  /* MICDET_ENA */
+#define WM8904_MICBIAS_ENA                      0x0001  /* MICBIAS_ENA */
+#define WM8904_MICBIAS_ENA_MASK                 0x0001  /* MICBIAS_ENA */
+#define WM8904_MICBIAS_ENA_SHIFT                     0  /* MICBIAS_ENA */
+#define WM8904_MICBIAS_ENA_WIDTH                     1  /* MICBIAS_ENA */
+
+/*
+ * R7 (0x07) - Mic Bias Control 1
+ */
+#define WM8904_MIC_DET_FILTER_ENA               0x8000  /* MIC_DET_FILTER_ENA */
+#define WM8904_MIC_DET_FILTER_ENA_MASK          0x8000  /* MIC_DET_FILTER_ENA */
+#define WM8904_MIC_DET_FILTER_ENA_SHIFT             15  /* MIC_DET_FILTER_ENA */
+#define WM8904_MIC_DET_FILTER_ENA_WIDTH              1  /* MIC_DET_FILTER_ENA */
+#define WM8904_MIC_SHORT_FILTER_ENA             0x4000  /* MIC_SHORT_FILTER_ENA */
+#define WM8904_MIC_SHORT_FILTER_ENA_MASK        0x4000  /* MIC_SHORT_FILTER_ENA */
+#define WM8904_MIC_SHORT_FILTER_ENA_SHIFT           14  /* MIC_SHORT_FILTER_ENA */
+#define WM8904_MIC_SHORT_FILTER_ENA_WIDTH            1  /* MIC_SHORT_FILTER_ENA */
+#define WM8904_MICBIAS_SEL_MASK                 0x0007  /* MICBIAS_SEL - [2:0] */
+#define WM8904_MICBIAS_SEL_SHIFT                     0  /* MICBIAS_SEL - [2:0] */
+#define WM8904_MICBIAS_SEL_WIDTH                     3  /* MICBIAS_SEL - [2:0] */
+
+
+/*
+ * R121 (0x79) - GPIO Control 1
+ */
+#define WM8904_GPIO1_PU                         0x0020  /* GPIO1_PU */
+#define WM8904_GPIO1_PU_MASK                    0x0020  /* GPIO1_PU */
+#define WM8904_GPIO1_PU_SHIFT                        5  /* GPIO1_PU */
+#define WM8904_GPIO1_PU_WIDTH                        1  /* GPIO1_PU */
+#define WM8904_GPIO1_PD                         0x0010  /* GPIO1_PD */
+#define WM8904_GPIO1_PD_MASK                    0x0010  /* GPIO1_PD */
+#define WM8904_GPIO1_PD_SHIFT                        4  /* GPIO1_PD */
+#define WM8904_GPIO1_PD_WIDTH                        1  /* GPIO1_PD */
+#define WM8904_GPIO1_SEL_MASK                   0x000F  /* GPIO1_SEL - [3:0] */
+#define WM8904_GPIO1_SEL_SHIFT                       0  /* GPIO1_SEL - [3:0] */
+#define WM8904_GPIO1_SEL_WIDTH                       4  /* GPIO1_SEL - [3:0] */
+
+/*
+ * R122 (0x7A) - GPIO Control 2
+ */
+#define WM8904_GPIO2_PU                         0x0020  /* GPIO2_PU */
+#define WM8904_GPIO2_PU_MASK                    0x0020  /* GPIO2_PU */
+#define WM8904_GPIO2_PU_SHIFT                        5  /* GPIO2_PU */
+#define WM8904_GPIO2_PU_WIDTH                        1  /* GPIO2_PU */
+#define WM8904_GPIO2_PD                         0x0010  /* GPIO2_PD */
+#define WM8904_GPIO2_PD_MASK                    0x0010  /* GPIO2_PD */
+#define WM8904_GPIO2_PD_SHIFT                        4  /* GPIO2_PD */
+#define WM8904_GPIO2_PD_WIDTH                        1  /* GPIO2_PD */
+#define WM8904_GPIO2_SEL_MASK                   0x000F  /* GPIO2_SEL - [3:0] */
+#define WM8904_GPIO2_SEL_SHIFT                       0  /* GPIO2_SEL - [3:0] */
+#define WM8904_GPIO2_SEL_WIDTH                       4  /* GPIO2_SEL - [3:0] */
+
+/*
+ * R123 (0x7B) - GPIO Control 3
+ */
+#define WM8904_GPIO3_PU                         0x0020  /* GPIO3_PU */
+#define WM8904_GPIO3_PU_MASK                    0x0020  /* GPIO3_PU */
+#define WM8904_GPIO3_PU_SHIFT                        5  /* GPIO3_PU */
+#define WM8904_GPIO3_PU_WIDTH                        1  /* GPIO3_PU */
+#define WM8904_GPIO3_PD                         0x0010  /* GPIO3_PD */
+#define WM8904_GPIO3_PD_MASK                    0x0010  /* GPIO3_PD */
+#define WM8904_GPIO3_PD_SHIFT                        4  /* GPIO3_PD */
+#define WM8904_GPIO3_PD_WIDTH                        1  /* GPIO3_PD */
+#define WM8904_GPIO3_SEL_MASK                   0x000F  /* GPIO3_SEL - [3:0] */
+#define WM8904_GPIO3_SEL_SHIFT                       0  /* GPIO3_SEL - [3:0] */
+#define WM8904_GPIO3_SEL_WIDTH                       4  /* GPIO3_SEL - [3:0] */
+
+/*
+ * R124 (0x7C) - GPIO Control 4
+ */
+#define WM8904_GPI7_ENA                         0x0200  /* GPI7_ENA */
+#define WM8904_GPI7_ENA_MASK                    0x0200  /* GPI7_ENA */
+#define WM8904_GPI7_ENA_SHIFT                        9  /* GPI7_ENA */
+#define WM8904_GPI7_ENA_WIDTH                        1  /* GPI7_ENA */
+#define WM8904_GPI8_ENA                         0x0100  /* GPI8_ENA */
+#define WM8904_GPI8_ENA_MASK                    0x0100  /* GPI8_ENA */
+#define WM8904_GPI8_ENA_SHIFT                        8  /* GPI8_ENA */
+#define WM8904_GPI8_ENA_WIDTH                        1  /* GPI8_ENA */
+#define WM8904_GPIO_BCLK_MODE_ENA               0x0080  /* GPIO_BCLK_MODE_ENA */
+#define WM8904_GPIO_BCLK_MODE_ENA_MASK          0x0080  /* GPIO_BCLK_MODE_ENA */
+#define WM8904_GPIO_BCLK_MODE_ENA_SHIFT              7  /* GPIO_BCLK_MODE_ENA */
+#define WM8904_GPIO_BCLK_MODE_ENA_WIDTH              1  /* GPIO_BCLK_MODE_ENA */
+#define WM8904_GPIO_BCLK_SEL_MASK               0x000F  /* GPIO_BCLK_SEL - [3:0] */
+#define WM8904_GPIO_BCLK_SEL_SHIFT                   0  /* GPIO_BCLK_SEL - [3:0] */
+#define WM8904_GPIO_BCLK_SEL_WIDTH                   4  /* GPIO_BCLK_SEL - [3:0] */
+
+#define WM8904_MIC_REGS  2
+#define WM8904_GPIO_REGS 4
+#define WM8904_DRC_REGS  4
+#define WM8904_EQ_REGS   25
+
+/**
+ * DRC configurations are specified with a label and a set of register
+ * values to write (the enable bits will be ignored).  At runtime an
+ * enumerated control will be presented for each DRC block allowing
+ * the user to choose the configration to use.
+ *
+ * Configurations may be generated by hand or by using the DRC control
+ * panel provided by the WISCE - see  http://www.wolfsonmicro.com/wisce/
+ * for details.
+ */
+struct wm8904_drc_cfg {
+	const char *name;
+	u16 regs[WM8904_DRC_REGS];
+};
+
+/**
+ * ReTune Mobile configurations are specified with a label, sample
+ * rate and set of values to write (the enable bits will be ignored).
+ *
+ * Configurations are expected to be generated using the ReTune Mobile
+ * control panel in WISCE - see http://www.wolfsonmicro.com/wisce/
+ */
+struct wm8904_retune_mobile_cfg {
+	const char *name;
+	unsigned int rate;
+	u16 regs[WM8904_EQ_REGS];
+};
+
+struct wm8904_pdata {
+	int num_drc_cfgs;
+	struct wm8904_drc_cfg *drc_cfgs;
+
+	int num_retune_mobile_cfgs;
+	struct wm8904_retune_mobile_cfg *retune_mobile_cfgs;
+
+	u32 gpio_cfg[WM8904_GPIO_REGS];
+	u32 mic_cfg[WM8904_MIC_REGS];
+};
+
+#endif
diff --git a/include/sound/wm8955.h b/include/sound/wm8955.h
new file mode 100644
index 00000000..5074ef49
--- /dev/null
+++ b/include/sound/wm8955.h
@@ -0,0 +1,26 @@
+/*
+ * Platform data for WM8955
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __WM8955_PDATA_H__
+#define __WM8955_PDATA_H__
+
+struct wm8955_pdata {
+	/* Configure LOUT2/ROUT2 to drive a speaker */
+	unsigned int out2_speaker:1;
+
+	/* Configure MONOIN+/- in differential mode */
+	unsigned int monoin_diff:1;
+};
+
+#endif
diff --git a/include/sound/wm8960.h b/include/sound/wm8960.h
new file mode 100644
index 00000000..74e9a955
--- /dev/null
+++ b/include/sound/wm8960.h
@@ -0,0 +1,24 @@
+/*
+ * wm8960.h  --  WM8960 Soc Audio driver platform data
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _WM8960_PDATA_H
+#define _WM8960_PDATA_H
+
+#define WM8960_DRES_400R 0
+#define WM8960_DRES_200R 1
+#define WM8960_DRES_600R 2
+#define WM8960_DRES_150R 3
+#define WM8960_DRES_MAX  3
+
+struct wm8960_data {
+	bool capless;  /* Headphone outputs configured in capless mode */
+
+	int dres;  /* Discharge resistance for headphone outputs */
+};
+
+#endif
diff --git a/include/sound/wm8962.h b/include/sound/wm8962.h
new file mode 100644
index 00000000..79e6d427
--- /dev/null
+++ b/include/sound/wm8962.h
@@ -0,0 +1,60 @@
+/*
+ * wm8962.h  --  WM8962 Soc Audio driver platform data
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _WM8962_PDATA_H
+#define _WM8962_PDATA_H
+
+#define WM8962_MAX_GPIO 6
+
+/* Use to set GPIO default values to zero */
+#define WM8962_GPIO_SET 0x10000
+
+#define WM8962_GPIO_FN_CLKOUT           0
+#define WM8962_GPIO_FN_LOGIC            1
+#define WM8962_GPIO_FN_SDOUT            2
+#define WM8962_GPIO_FN_IRQ              3
+#define WM8962_GPIO_FN_THERMAL          4
+#define WM8962_GPIO_FN_PLL2_LOCK        6
+#define WM8962_GPIO_FN_PLL3_LOCK        7
+#define WM8962_GPIO_FN_FLL_LOCK         9
+#define WM8962_GPIO_FN_DRC_ACT         10
+#define WM8962_GPIO_FN_WSEQ_DONE       11
+#define WM8962_GPIO_FN_ALC_NG_ACT      12
+#define WM8962_GPIO_FN_ALC_PEAK_LIMIT  13
+#define WM8962_GPIO_FN_ALC_SATURATION  14
+#define WM8962_GPIO_FN_ALC_LEVEL_THR   15
+#define WM8962_GPIO_FN_ALC_LEVEL_LOCK  16
+#define WM8962_GPIO_FN_FIFO_ERR        17
+#define WM8962_GPIO_FN_OPCLK           18
+#define WM8962_GPIO_FN_DMICCLK         19
+#define WM8962_GPIO_FN_DMICDAT         20
+#define WM8962_GPIO_FN_MICD            21
+#define WM8962_GPIO_FN_MICSCD          22
+
+struct wm8962_pdata {
+	int gpio_base;
+	u32 gpio_init[WM8962_MAX_GPIO];
+
+	/* Setup for microphone detection, raw value to be written to
+	 * R48(0x30) - only microphone related bits will be updated.
+	 * Detection may be enabled here for use with signals brought
+	 * out on the GPIOs. */
+	u32 mic_cfg;
+
+	bool irq_active_low;
+
+	bool spk_mono;   /* Speaker outputs tied together as mono */
+
+	/**
+	 * This flag should be set if one or both IN4 inputs is wired
+	 * in a DC measurement configuration.
+	 */
+	bool in4_dc_measure;
+};
+
+#endif
diff --git a/include/sound/wm8993.h b/include/sound/wm8993.h
new file mode 100644
index 00000000..eee19f63
--- /dev/null
+++ b/include/sound/wm8993.h
@@ -0,0 +1,44 @@
+/*
+ * linux/sound/wm8993.h -- Platform data for WM8993
+ *
+ * Copyright 2009 Wolfson Microelectronics. PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_WM8993_H
+#define __LINUX_SND_WM8993_H
+
+/* Note that EQ1 only contains the enable/disable bit so will be
+   ignored but is included for simplicity.
+ */
+struct wm8993_retune_mobile_setting {
+	const char *name;
+	unsigned int rate;
+	u16 config[24];
+};
+
+struct wm8993_platform_data {
+	struct wm8993_retune_mobile_setting *retune_configs;
+	int num_retune_configs;
+
+	/* LINEOUT can be differential or single ended */
+	unsigned int lineout1_diff:1;
+	unsigned int lineout2_diff:1;
+
+	/* Common mode feedback */
+	unsigned int lineout1fb:1;
+	unsigned int lineout2fb:1;
+
+	/* Microphone biases: 0=0.9*AVDD1 1=0.65*AVVD1 */
+	unsigned int micbias1_lvl:1;
+	unsigned int micbias2_lvl:1;
+
+	/* Jack detect threshold levels, see datasheet for values */
+	unsigned int jd_scthr:2;
+	unsigned int jd_thr:2;
+};
+
+#endif
diff --git a/include/sound/wm8996.h b/include/sound/wm8996.h
new file mode 100644
index 00000000..ea4d88f4
--- /dev/null
+++ b/include/sound/wm8996.h
@@ -0,0 +1,55 @@
+/*
+ * linux/sound/wm8996.h -- Platform data for WM8996
+ *
+ * Copyright 2011 Wolfson Microelectronics. PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_WM8996_H
+#define __LINUX_SND_WM8996_H
+
+enum wm8996_inmode {
+	WM8996_DIFFERRENTIAL_1 = 0,   /* IN1xP - IN1xN */
+	WM8996_INVERTING = 1,         /* IN1xN */
+	WM8996_NON_INVERTING = 2,     /* IN1xP */
+	WM8996_DIFFERENTIAL_2 = 3,    /* IN2xP - IN2xP */
+};
+
+/**
+ * ReTune Mobile configurations are specified with a label, sample
+ * rate and set of values to write (the enable bits will be ignored).
+ *
+ * Configurations are expected to be generated using the ReTune Mobile
+ * control panel in WISCE - see http://www.wolfsonmicro.com/wisce/
+ */
+struct wm8996_retune_mobile_config {
+	const char *name;
+	int rate;
+	u16 regs[20];
+};
+
+#define WM8996_SET_DEFAULT 0x10000
+
+struct wm8996_pdata {
+	int irq_flags;  /** Set IRQ trigger flags; default active low */
+
+	int ldo_ena;  /** GPIO for LDO1; -1 for none */
+
+	int micdet_def;  /** Default MICDET_SRC/HP1FB_SRC/MICD_BIAS */
+
+	enum wm8996_inmode inl_mode;
+	enum wm8996_inmode inr_mode;
+
+	u32 spkmute_seq;  /** Value for register 0x802 */
+
+	int gpio_base;
+	u32 gpio_default[5];
+
+	int num_retune_mobile_cfgs;
+	struct wm8996_retune_mobile_config *retune_mobile_cfgs;
+};
+
+#endif
diff --git a/include/sound/wm9081.h b/include/sound/wm9081.h
new file mode 100644
index 00000000..f34b0b17
--- /dev/null
+++ b/include/sound/wm9081.h
@@ -0,0 +1,28 @@
+/*
+ * linux/sound/wm9081.h -- Platform data for WM9081
+ *
+ * Copyright 2009 Wolfson Microelectronics. PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_WM_9081_H
+#define __LINUX_SND_WM_9081_H
+
+struct wm9081_retune_mobile_setting {
+	const char *name;
+	unsigned int rate;
+	u16 config[20];
+};
+
+struct wm9081_pdata {
+	bool irq_high;   /* IRQ is active high */
+	bool irq_cmos;   /* IRQ is in CMOS mode */
+
+	struct wm9081_retune_mobile_setting *retune_configs;
+	int num_retune_configs;
+};
+
+#endif
diff --git a/include/sound/wm9090.h b/include/sound/wm9090.h
new file mode 100644
index 00000000..3718928c
--- /dev/null
+++ b/include/sound/wm9090.h
@@ -0,0 +1,28 @@
+/*
+ * linux/sound/wm9090.h -- Platform data for WM9090
+ *
+ * Copyright 2009, 2010 Wolfson Microelectronics. PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_WM9090_H
+#define __LINUX_SND_WM9090_H
+
+struct wm9090_platform_data {
+	/* Line inputs 1 & 2 can optionally be differential */
+	unsigned int lin1_diff:1;
+	unsigned int lin2_diff:1;
+
+	/* AGC configuration.  This is intended to protect the speaker
+	 * against overdriving and will therefore depend on the
+	 * hardware setup with incorrect runtime configuration
+	 * potentially causing hardware damage.
+	 */
+	unsigned int agc_ena:1;
+	u16 agc[3];
+};
+
+#endif
diff --git a/include/sound/wss.h b/include/sound/wss.h
new file mode 100644
index 00000000..fd01f228
--- /dev/null
+++ b/include/sound/wss.h
@@ -0,0 +1,235 @@
+#ifndef __SOUND_WSS_H
+#define __SOUND_WSS_H
+
+/*
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ *  Definitions for CS4231 & InterWave chips & compatible chips
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include "control.h"
+#include "pcm.h"
+#include "timer.h"
+
+#include "cs4231-regs.h"
+
+/* defines for codec.mode */
+
+#define WSS_MODE_NONE	0x0000
+#define WSS_MODE_PLAY	0x0001
+#define WSS_MODE_RECORD	0x0002
+#define WSS_MODE_TIMER	0x0004
+#define WSS_MODE_OPEN	(WSS_MODE_PLAY|WSS_MODE_RECORD|WSS_MODE_TIMER)
+
+/* defines for codec.hardware */
+
+#define WSS_HW_DETECT        0x0000	/* let CS4231 driver detect chip */
+#define WSS_HW_DETECT3	0x0001	/* allow mode 3 */
+#define WSS_HW_TYPE_MASK	0xff00	/* type mask */
+#define WSS_HW_CS4231_MASK   0x0100	/* CS4231 serie */
+#define WSS_HW_CS4231        0x0100	/* CS4231 chip */
+#define WSS_HW_CS4231A       0x0101	/* CS4231A chip */
+#define WSS_HW_AD1845	0x0102	/* AD1845 chip */
+#define WSS_HW_CS4232_MASK   0x0200	/* CS4232 serie (has control ports) */
+#define WSS_HW_CS4232        0x0200	/* CS4232 */
+#define WSS_HW_CS4232A       0x0201	/* CS4232A */
+#define WSS_HW_CS4236	0x0202	/* CS4236 */
+#define WSS_HW_CS4236B_MASK	0x0400	/* CS4236B serie (has extended control regs) */
+#define WSS_HW_CS4235	0x0400	/* CS4235 - Crystal Clear (tm) stereo enhancement */
+#define WSS_HW_CS4236B       0x0401	/* CS4236B */
+#define WSS_HW_CS4237B       0x0402	/* CS4237B - SRS 3D */
+#define WSS_HW_CS4238B	0x0403	/* CS4238B - QSOUND 3D */
+#define WSS_HW_CS4239	0x0404	/* CS4239 - Crystal Clear (tm) stereo enhancement */
+#define WSS_HW_AD1848_MASK	0x0800	/* AD1848 serie (half duplex) */
+#define WSS_HW_AD1847		0x0801	/* AD1847 chip */
+#define WSS_HW_AD1848		0x0802	/* AD1848 chip */
+#define WSS_HW_CS4248		0x0803	/* CS4248 chip */
+#define WSS_HW_CMI8330		0x0804	/* CMI8330 chip */
+#define WSS_HW_THINKPAD		0x0805	/* Thinkpad 360/750/755 */
+/* compatible, but clones */
+#define WSS_HW_INTERWAVE     0x1000	/* InterWave chip */
+#define WSS_HW_OPL3SA2       0x1101	/* OPL3-SA2 chip, similar to cs4231 */
+#define WSS_HW_OPTI93X 	0x1102	/* Opti 930/931/933 */
+
+/* defines for codec.hwshare */
+#define WSS_HWSHARE_IRQ	(1<<0)
+#define WSS_HWSHARE_DMA1	(1<<1)
+#define WSS_HWSHARE_DMA2	(1<<2)
+
+/* IBM Thinkpad specific stuff */
+#define AD1848_THINKPAD_CTL_PORT1		0x15e8
+#define AD1848_THINKPAD_CTL_PORT2		0x15e9
+#define AD1848_THINKPAD_CS4248_ENABLE_BIT	0x02
+
+struct snd_wss {
+	unsigned long port;		/* base i/o port */
+	struct resource *res_port;
+	unsigned long cport;		/* control base i/o port (CS4236) */
+	struct resource *res_cport;
+	int irq;			/* IRQ line */
+	int dma1;			/* playback DMA */
+	int dma2;			/* record DMA */
+	unsigned short version;		/* version of CODEC chip */
+	unsigned short mode;		/* see to WSS_MODE_XXXX */
+	unsigned short hardware;	/* see to WSS_HW_XXXX */
+	unsigned short hwshare;		/* shared resources */
+	unsigned short single_dma:1,	/* forced single DMA mode (GUS 16-bit */
+					/* daughter board) or dma1 == dma2 */
+		       ebus_flag:1,	/* SPARC: EBUS present */
+		       thinkpad_flag:1;	/* Thinkpad CS4248 needs extra help */
+
+	struct snd_card *card;
+	struct snd_pcm *pcm;
+	struct snd_pcm_substream *playback_substream;
+	struct snd_pcm_substream *capture_substream;
+	struct snd_timer *timer;
+
+	unsigned char image[32];	/* registers image */
+	unsigned char eimage[32];	/* extended registers image */
+	unsigned char cimage[16];	/* control registers image */
+	int mce_bit;
+	int calibrate_mute;
+	int sw_3d_bit;
+	unsigned int p_dma_size;
+	unsigned int c_dma_size;
+
+	spinlock_t reg_lock;
+	struct mutex mce_mutex;
+	struct mutex open_mutex;
+
+	int (*rate_constraint) (struct snd_pcm_runtime *runtime);
+	void (*set_playback_format) (struct snd_wss *chip,
+				     struct snd_pcm_hw_params *hw_params,
+				     unsigned char pdfr);
+	void (*set_capture_format) (struct snd_wss *chip,
+				    struct snd_pcm_hw_params *hw_params,
+				    unsigned char cdfr);
+	void (*trigger) (struct snd_wss *chip, unsigned int what, int start);
+#ifdef CONFIG_PM
+	void (*suspend) (struct snd_wss *chip);
+	void (*resume) (struct snd_wss *chip);
+#endif
+	void *dma_private_data;
+	int (*claim_dma) (struct snd_wss *chip,
+			  void *dma_private_data, int dma);
+	int (*release_dma) (struct snd_wss *chip,
+			    void *dma_private_data, int dma);
+};
+
+/* exported functions */
+
+void snd_wss_out(struct snd_wss *chip, unsigned char reg, unsigned char val);
+unsigned char snd_wss_in(struct snd_wss *chip, unsigned char reg);
+void snd_cs4236_ext_out(struct snd_wss *chip,
+			unsigned char reg, unsigned char val);
+unsigned char snd_cs4236_ext_in(struct snd_wss *chip, unsigned char reg);
+void snd_wss_mce_up(struct snd_wss *chip);
+void snd_wss_mce_down(struct snd_wss *chip);
+
+void snd_wss_overrange(struct snd_wss *chip);
+
+irqreturn_t snd_wss_interrupt(int irq, void *dev_id);
+
+const char *snd_wss_chip_id(struct snd_wss *chip);
+
+int snd_wss_create(struct snd_card *card,
+		      unsigned long port,
+		      unsigned long cport,
+		      int irq, int dma1, int dma2,
+		      unsigned short hardware,
+		      unsigned short hwshare,
+		      struct snd_wss **rchip);
+int snd_wss_pcm(struct snd_wss *chip, int device, struct snd_pcm **rpcm);
+int snd_wss_timer(struct snd_wss *chip, int device, struct snd_timer **rtimer);
+int snd_wss_mixer(struct snd_wss *chip);
+
+const struct snd_pcm_ops *snd_wss_get_pcm_ops(int direction);
+
+int snd_cs4236_create(struct snd_card *card,
+		      unsigned long port,
+		      unsigned long cport,
+		      int irq, int dma1, int dma2,
+		      unsigned short hardware,
+		      unsigned short hwshare,
+		      struct snd_wss **rchip);
+int snd_cs4236_pcm(struct snd_wss *chip, int device, struct snd_pcm **rpcm);
+int snd_cs4236_mixer(struct snd_wss *chip);
+
+/*
+ *  mixer library
+ */
+
+#define WSS_SINGLE(xname, xindex, reg, shift, mask, invert) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+  .name = xname, \
+  .index = xindex, \
+  .info = snd_wss_info_single, \
+  .get = snd_wss_get_single, \
+  .put = snd_wss_put_single, \
+  .private_value = reg | (shift << 8) | (mask << 16) | (invert << 24) }
+
+int snd_wss_info_single(struct snd_kcontrol *kcontrol,
+			struct snd_ctl_elem_info *uinfo);
+int snd_wss_get_single(struct snd_kcontrol *kcontrol,
+			struct snd_ctl_elem_value *ucontrol);
+int snd_wss_put_single(struct snd_kcontrol *kcontrol,
+			struct snd_ctl_elem_value *ucontrol);
+
+#define WSS_DOUBLE(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+  .name = xname, \
+  .index = xindex, \
+  .info = snd_wss_info_double, \
+  .get = snd_wss_get_double, \
+  .put = snd_wss_put_double, \
+  .private_value = left_reg | (right_reg << 8) | (shift_left << 16) | \
+		   (shift_right << 19) | (mask << 24) | (invert << 22) }
+
+#define WSS_SINGLE_TLV(xname, xindex, reg, shift, mask, invert, xtlv) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+  .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ, \
+  .name = xname, \
+  .index = xindex, \
+  .info = snd_wss_info_single, \
+  .get = snd_wss_get_single, \
+  .put = snd_wss_put_single, \
+  .private_value = reg | (shift << 8) | (mask << 16) | (invert << 24), \
+  .tlv = { .p = (xtlv) } }
+
+#define WSS_DOUBLE_TLV(xname, xindex, left_reg, right_reg, \
+			shift_left, shift_right, mask, invert, xtlv) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+  .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ, \
+  .name = xname, \
+  .index = xindex, \
+  .info = snd_wss_info_double, \
+  .get = snd_wss_get_double, \
+  .put = snd_wss_put_double, \
+  .private_value = left_reg | (right_reg << 8) | (shift_left << 16) | \
+		   (shift_right << 19) | (mask << 24) | (invert << 22), \
+  .tlv = { .p = (xtlv) } }
+
+
+int snd_wss_info_double(struct snd_kcontrol *kcontrol,
+			struct snd_ctl_elem_info *uinfo);
+int snd_wss_get_double(struct snd_kcontrol *kcontrol,
+			struct snd_ctl_elem_value *ucontrol);
+int snd_wss_put_double(struct snd_kcontrol *kcontrol,
+			struct snd_ctl_elem_value *ucontrol);
+
+#endif /* __SOUND_WSS_H */
diff --git a/include/sound/ymfpci.h b/include/sound/ymfpci.h
new file mode 100644
index 00000000..41199664
--- /dev/null
+++ b/include/sound/ymfpci.h
@@ -0,0 +1,390 @@
+#ifndef __SOUND_YMFPCI_H
+#define __SOUND_YMFPCI_H
+
+/*
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ *  Definitions for Yahama YMF724/740/744/754 chips
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include "pcm.h"
+#include "rawmidi.h"
+#include "ac97_codec.h"
+#include "timer.h"
+#include <linux/gameport.h>
+
+/*
+ *  Direct registers
+ */
+
+#define YMFREG(chip, reg)		(chip->port + YDSXGR_##reg)
+
+#define	YDSXGR_INTFLAG			0x0004
+#define	YDSXGR_ACTIVITY			0x0006
+#define	YDSXGR_GLOBALCTRL		0x0008
+#define	YDSXGR_ZVCTRL			0x000A
+#define	YDSXGR_TIMERCTRL		0x0010
+#define	YDSXGR_TIMERCOUNT		0x0012
+#define	YDSXGR_SPDIFOUTCTRL		0x0018
+#define	YDSXGR_SPDIFOUTSTATUS		0x001C
+#define	YDSXGR_EEPROMCTRL		0x0020
+#define	YDSXGR_SPDIFINCTRL		0x0034
+#define	YDSXGR_SPDIFINSTATUS		0x0038
+#define	YDSXGR_DSPPROGRAMDL		0x0048
+#define	YDSXGR_DLCNTRL			0x004C
+#define	YDSXGR_GPIOININTFLAG		0x0050
+#define	YDSXGR_GPIOININTENABLE		0x0052
+#define	YDSXGR_GPIOINSTATUS		0x0054
+#define	YDSXGR_GPIOOUTCTRL		0x0056
+#define	YDSXGR_GPIOFUNCENABLE		0x0058
+#define	YDSXGR_GPIOTYPECONFIG		0x005A
+#define	YDSXGR_AC97CMDDATA		0x0060
+#define	YDSXGR_AC97CMDADR		0x0062
+#define	YDSXGR_PRISTATUSDATA		0x0064
+#define	YDSXGR_PRISTATUSADR		0x0066
+#define	YDSXGR_SECSTATUSDATA		0x0068
+#define	YDSXGR_SECSTATUSADR		0x006A
+#define	YDSXGR_SECCONFIG		0x0070
+#define	YDSXGR_LEGACYOUTVOL		0x0080
+#define	YDSXGR_LEGACYOUTVOLL		0x0080
+#define	YDSXGR_LEGACYOUTVOLR		0x0082
+#define	YDSXGR_NATIVEDACOUTVOL		0x0084
+#define	YDSXGR_NATIVEDACOUTVOLL		0x0084
+#define	YDSXGR_NATIVEDACOUTVOLR		0x0086
+#define	YDSXGR_ZVOUTVOL			0x0088
+#define	YDSXGR_ZVOUTVOLL		0x0088
+#define	YDSXGR_ZVOUTVOLR		0x008A
+#define	YDSXGR_SECADCOUTVOL		0x008C
+#define	YDSXGR_SECADCOUTVOLL		0x008C
+#define	YDSXGR_SECADCOUTVOLR		0x008E
+#define	YDSXGR_PRIADCOUTVOL		0x0090
+#define	YDSXGR_PRIADCOUTVOLL		0x0090
+#define	YDSXGR_PRIADCOUTVOLR		0x0092
+#define	YDSXGR_LEGACYLOOPVOL		0x0094
+#define	YDSXGR_LEGACYLOOPVOLL		0x0094
+#define	YDSXGR_LEGACYLOOPVOLR		0x0096
+#define	YDSXGR_NATIVEDACLOOPVOL		0x0098
+#define	YDSXGR_NATIVEDACLOOPVOLL	0x0098
+#define	YDSXGR_NATIVEDACLOOPVOLR	0x009A
+#define	YDSXGR_ZVLOOPVOL		0x009C
+#define	YDSXGR_ZVLOOPVOLL		0x009E
+#define	YDSXGR_ZVLOOPVOLR		0x009E
+#define	YDSXGR_SECADCLOOPVOL		0x00A0
+#define	YDSXGR_SECADCLOOPVOLL		0x00A0
+#define	YDSXGR_SECADCLOOPVOLR		0x00A2
+#define	YDSXGR_PRIADCLOOPVOL		0x00A4
+#define	YDSXGR_PRIADCLOOPVOLL		0x00A4
+#define	YDSXGR_PRIADCLOOPVOLR		0x00A6
+#define	YDSXGR_NATIVEADCINVOL		0x00A8
+#define	YDSXGR_NATIVEADCINVOLL		0x00A8
+#define	YDSXGR_NATIVEADCINVOLR		0x00AA
+#define	YDSXGR_NATIVEDACINVOL		0x00AC
+#define	YDSXGR_NATIVEDACINVOLL		0x00AC
+#define	YDSXGR_NATIVEDACINVOLR		0x00AE
+#define	YDSXGR_BUF441OUTVOL		0x00B0
+#define	YDSXGR_BUF441OUTVOLL		0x00B0
+#define	YDSXGR_BUF441OUTVOLR		0x00B2
+#define	YDSXGR_BUF441LOOPVOL		0x00B4
+#define	YDSXGR_BUF441LOOPVOLL		0x00B4
+#define	YDSXGR_BUF441LOOPVOLR		0x00B6
+#define	YDSXGR_SPDIFOUTVOL		0x00B8
+#define	YDSXGR_SPDIFOUTVOLL		0x00B8
+#define	YDSXGR_SPDIFOUTVOLR		0x00BA
+#define	YDSXGR_SPDIFLOOPVOL		0x00BC
+#define	YDSXGR_SPDIFLOOPVOLL		0x00BC
+#define	YDSXGR_SPDIFLOOPVOLR		0x00BE
+#define	YDSXGR_ADCSLOTSR		0x00C0
+#define	YDSXGR_RECSLOTSR		0x00C4
+#define	YDSXGR_ADCFORMAT		0x00C8
+#define	YDSXGR_RECFORMAT		0x00CC
+#define	YDSXGR_P44SLOTSR		0x00D0
+#define	YDSXGR_STATUS			0x0100
+#define	YDSXGR_CTRLSELECT		0x0104
+#define	YDSXGR_MODE			0x0108
+#define	YDSXGR_SAMPLECOUNT		0x010C
+#define	YDSXGR_NUMOFSAMPLES		0x0110
+#define	YDSXGR_CONFIG			0x0114
+#define	YDSXGR_PLAYCTRLSIZE		0x0140
+#define	YDSXGR_RECCTRLSIZE		0x0144
+#define	YDSXGR_EFFCTRLSIZE		0x0148
+#define	YDSXGR_WORKSIZE			0x014C
+#define	YDSXGR_MAPOFREC			0x0150
+#define	YDSXGR_MAPOFEFFECT		0x0154
+#define	YDSXGR_PLAYCTRLBASE		0x0158
+#define	YDSXGR_RECCTRLBASE		0x015C
+#define	YDSXGR_EFFCTRLBASE		0x0160
+#define	YDSXGR_WORKBASE			0x0164
+#define	YDSXGR_DSPINSTRAM		0x1000
+#define	YDSXGR_CTRLINSTRAM		0x4000
+
+#define YDSXG_AC97READCMD		0x8000
+#define YDSXG_AC97WRITECMD		0x0000
+
+#define PCIR_DSXG_LEGACY		0x40
+#define PCIR_DSXG_ELEGACY		0x42
+#define PCIR_DSXG_CTRL			0x48
+#define PCIR_DSXG_PWRCTRL1		0x4a
+#define PCIR_DSXG_PWRCTRL2		0x4e
+#define PCIR_DSXG_FMBASE		0x60
+#define PCIR_DSXG_SBBASE		0x62
+#define PCIR_DSXG_MPU401BASE		0x64
+#define PCIR_DSXG_JOYBASE		0x66
+
+#define YDSXG_DSPLENGTH			0x0080
+#define YDSXG_CTRLLENGTH		0x3000
+
+#define YDSXG_DEFAULT_WORK_SIZE		0x0400
+
+#define YDSXG_PLAYBACK_VOICES		64
+#define YDSXG_CAPTURE_VOICES		2
+#define YDSXG_EFFECT_VOICES		5
+
+#define YMFPCI_LEGACY_SBEN	(1 << 0)	/* soundblaster enable */
+#define YMFPCI_LEGACY_FMEN	(1 << 1)	/* OPL3 enable */
+#define YMFPCI_LEGACY_JPEN	(1 << 2)	/* joystick enable */
+#define YMFPCI_LEGACY_MEN	(1 << 3)	/* MPU401 enable */
+#define YMFPCI_LEGACY_MIEN	(1 << 4)	/* MPU RX irq enable */
+#define YMFPCI_LEGACY_IOBITS	(1 << 5)	/* i/o bits range, 0 = 16bit, 1 =10bit */
+#define YMFPCI_LEGACY_SDMA	(3 << 6)	/* SB DMA select */
+#define YMFPCI_LEGACY_SBIRQ	(7 << 8)	/* SB IRQ select */
+#define YMFPCI_LEGACY_MPUIRQ	(7 << 11)	/* MPU IRQ select */
+#define YMFPCI_LEGACY_SIEN	(1 << 14)	/* serialized IRQ */
+#define YMFPCI_LEGACY_LAD	(1 << 15)	/* legacy audio disable */
+
+#define YMFPCI_LEGACY2_FMIO	(3 << 0)	/* OPL3 i/o address (724/740) */
+#define YMFPCI_LEGACY2_SBIO	(3 << 2)	/* SB i/o address (724/740) */
+#define YMFPCI_LEGACY2_MPUIO	(3 << 4)	/* MPU401 i/o address (724/740) */
+#define YMFPCI_LEGACY2_JSIO	(3 << 6)	/* joystick i/o address (724/740) */
+#define YMFPCI_LEGACY2_MAIM	(1 << 8)	/* MPU401 ack intr mask */
+#define YMFPCI_LEGACY2_SMOD	(3 << 11)	/* SB DMA mode */
+#define YMFPCI_LEGACY2_SBVER	(3 << 13)	/* SB version select */
+#define YMFPCI_LEGACY2_IMOD	(1 << 15)	/* legacy IRQ mode */
+/* SIEN:IMOD 0:0 = legacy irq, 0:1 = INTA, 1:0 = serialized IRQ */
+
+#if defined(CONFIG_GAMEPORT) || (defined(MODULE) && defined(CONFIG_GAMEPORT_MODULE))
+#define SUPPORT_JOYSTICK
+#endif
+
+/*
+ *
+ */
+
+struct snd_ymfpci_playback_bank {
+	u32 format;
+	u32 loop_default;
+	u32 base;			/* 32-bit address */
+	u32 loop_start;			/* 32-bit offset */
+	u32 loop_end;			/* 32-bit offset */
+	u32 loop_frac;			/* 8-bit fraction - loop_start */
+	u32 delta_end;			/* pitch delta end */
+	u32 lpfK_end;
+	u32 eg_gain_end;
+	u32 left_gain_end;
+	u32 right_gain_end;
+	u32 eff1_gain_end;
+	u32 eff2_gain_end;
+	u32 eff3_gain_end;
+	u32 lpfQ;
+	u32 status;
+	u32 num_of_frames;
+	u32 loop_count;
+	u32 start;
+	u32 start_frac;
+	u32 delta;
+	u32 lpfK;
+	u32 eg_gain;
+	u32 left_gain;
+	u32 right_gain;
+	u32 eff1_gain;
+	u32 eff2_gain;
+	u32 eff3_gain;
+	u32 lpfD1;
+	u32 lpfD2;
+ };
+
+struct snd_ymfpci_capture_bank {
+	u32 base;			/* 32-bit address */
+	u32 loop_end;			/* 32-bit offset */
+	u32 start;			/* 32-bit offset */
+	u32 num_of_loops;		/* counter */
+};
+
+struct snd_ymfpci_effect_bank {
+	u32 base;			/* 32-bit address */
+	u32 loop_end;			/* 32-bit offset */
+	u32 start;			/* 32-bit offset */
+	u32 temp;
+};
+
+struct snd_ymfpci_pcm;
+struct snd_ymfpci;
+
+enum snd_ymfpci_voice_type {
+	YMFPCI_PCM,
+	YMFPCI_SYNTH,
+	YMFPCI_MIDI
+};
+
+struct snd_ymfpci_voice {
+	struct snd_ymfpci *chip;
+	int number;
+	unsigned int use: 1,
+	    pcm: 1,
+	    synth: 1,
+	    midi: 1;
+	struct snd_ymfpci_playback_bank *bank;
+	dma_addr_t bank_addr;
+	void (*interrupt)(struct snd_ymfpci *chip, struct snd_ymfpci_voice *voice);
+	struct snd_ymfpci_pcm *ypcm;
+};
+
+enum snd_ymfpci_pcm_type {
+	PLAYBACK_VOICE,
+	CAPTURE_REC,
+	CAPTURE_AC97,
+	EFFECT_DRY_LEFT,
+	EFFECT_DRY_RIGHT,
+	EFFECT_EFF1,
+	EFFECT_EFF2,
+	EFFECT_EFF3
+};
+
+struct snd_ymfpci_pcm {
+	struct snd_ymfpci *chip;
+	enum snd_ymfpci_pcm_type type;
+	struct snd_pcm_substream *substream;
+	struct snd_ymfpci_voice *voices[2];	/* playback only */
+	unsigned int running: 1,
+		     use_441_slot: 1,
+	             output_front: 1,
+	             output_rear: 1,
+	             swap_rear: 1;
+	unsigned int update_pcm_vol;
+	u32 period_size;		/* cached from runtime->period_size */
+	u32 buffer_size;		/* cached from runtime->buffer_size */
+	u32 period_pos;
+	u32 last_pos;
+	u32 capture_bank_number;
+	u32 shift;
+};
+
+struct snd_ymfpci {
+	int irq;
+
+	unsigned int device_id;	/* PCI device ID */
+	unsigned char rev;	/* PCI revision */
+	unsigned long reg_area_phys;
+	void __iomem *reg_area_virt;
+	struct resource *res_reg_area;
+	struct resource *fm_res;
+	struct resource *mpu_res;
+
+	unsigned short old_legacy_ctrl;
+#ifdef SUPPORT_JOYSTICK
+	struct gameport *gameport;
+#endif
+
+	struct snd_dma_buffer work_ptr;
+
+	unsigned int bank_size_playback;
+	unsigned int bank_size_capture;
+	unsigned int bank_size_effect;
+	unsigned int work_size;
+
+	void *bank_base_playback;
+	void *bank_base_capture;
+	void *bank_base_effect;
+	void *work_base;
+	dma_addr_t bank_base_playback_addr;
+	dma_addr_t bank_base_capture_addr;
+	dma_addr_t bank_base_effect_addr;
+	dma_addr_t work_base_addr;
+	struct snd_dma_buffer ac3_tmp_base;
+
+	u32 *ctrl_playback;
+	struct snd_ymfpci_playback_bank *bank_playback[YDSXG_PLAYBACK_VOICES][2];
+	struct snd_ymfpci_capture_bank *bank_capture[YDSXG_CAPTURE_VOICES][2];
+	struct snd_ymfpci_effect_bank *bank_effect[YDSXG_EFFECT_VOICES][2];
+
+	int start_count;
+
+	u32 active_bank;
+	struct snd_ymfpci_voice voices[64];
+	int src441_used;
+
+	struct snd_ac97_bus *ac97_bus;
+	struct snd_ac97 *ac97;
+	struct snd_rawmidi *rawmidi;
+	struct snd_timer *timer;
+	unsigned int timer_ticks;
+
+	struct pci_dev *pci;
+	struct snd_card *card;
+	struct snd_pcm *pcm;
+	struct snd_pcm *pcm2;
+	struct snd_pcm *pcm_spdif;
+	struct snd_pcm *pcm_4ch;
+	struct snd_pcm_substream *capture_substream[YDSXG_CAPTURE_VOICES];
+	struct snd_pcm_substream *effect_substream[YDSXG_EFFECT_VOICES];
+	struct snd_kcontrol *ctl_vol_recsrc;
+	struct snd_kcontrol *ctl_vol_adcrec;
+	struct snd_kcontrol *ctl_vol_spdifrec;
+	unsigned short spdif_bits, spdif_pcm_bits;
+	struct snd_kcontrol *spdif_pcm_ctl;
+	int mode_dup4ch;
+	int rear_opened;
+	int spdif_opened;
+	struct snd_ymfpci_pcm_mixer {
+		u16 left;
+		u16 right;
+		struct snd_kcontrol *ctl;
+	} pcm_mixer[32];
+
+	spinlock_t reg_lock;
+	spinlock_t voice_lock;
+	wait_queue_head_t interrupt_sleep;
+	atomic_t interrupt_sleep_count;
+	struct snd_info_entry *proc_entry;
+	const struct firmware *dsp_microcode;
+	const struct firmware *controller_microcode;
+
+#ifdef CONFIG_PM
+	u32 *saved_regs;
+	u32 saved_ydsxgr_mode;
+	u16 saved_dsxg_legacy;
+	u16 saved_dsxg_elegacy;
+#endif
+};
+
+int snd_ymfpci_create(struct snd_card *card,
+		      struct pci_dev *pci,
+		      unsigned short old_legacy_ctrl,
+		      struct snd_ymfpci ** rcodec);
+void snd_ymfpci_free_gameport(struct snd_ymfpci *chip);
+
+int snd_ymfpci_suspend(struct pci_dev *pci, pm_message_t state);
+int snd_ymfpci_resume(struct pci_dev *pci);
+
+int snd_ymfpci_pcm(struct snd_ymfpci *chip, int device, struct snd_pcm **rpcm);
+int snd_ymfpci_pcm2(struct snd_ymfpci *chip, int device, struct snd_pcm **rpcm);
+int snd_ymfpci_pcm_spdif(struct snd_ymfpci *chip, int device, struct snd_pcm **rpcm);
+int snd_ymfpci_pcm_4ch(struct snd_ymfpci *chip, int device, struct snd_pcm **rpcm);
+int snd_ymfpci_mixer(struct snd_ymfpci *chip, int rear_switch);
+int snd_ymfpci_timer(struct snd_ymfpci *chip, int device);
+
+#endif /* __SOUND_YMFPCI_H */
diff --git a/include/target/configfs_macros.h b/include/target/configfs_macros.h
new file mode 100644
index 00000000..a0fc85bb
--- /dev/null
+++ b/include/target/configfs_macros.h
@@ -0,0 +1,147 @@
+/* -*- mode: c; c-basic-offset: 8; -*-
+ * vim: noexpandtab sw=8 ts=8 sts=0:
+ *
+ * configfs_macros.h - extends macros for configfs
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the
+ * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 021110-1307, USA.
+ *
+ * Based on sysfs:
+ * 	sysfs is Copyright (C) 2001, 2002, 2003 Patrick Mochel
+ *
+ * Based on kobject.h:
+ *      Copyright (c) 2002-2003	Patrick Mochel
+ *      Copyright (c) 2002-2003	Open Source Development Labs
+ *
+ * configfs Copyright (C) 2005 Oracle.  All rights reserved.
+ *
+ * Added CONFIGFS_EATTR() macros from original configfs.h macros
+ * Copright (C) 2008-2009 Nicholas A. Bellinger <nab@linux-iscsi.org>
+ *
+ * Please read Documentation/filesystems/configfs/configfs.txt before using
+ * the configfs interface, ESPECIALLY the parts about reference counts and
+ * item destructors.
+ */
+
+#ifndef _CONFIGFS_MACROS_H_
+#define _CONFIGFS_MACROS_H_
+
+#include <linux/configfs.h>
+
+/*
+ * Users often need to create attribute structures for their configurable
+ * attributes, containing a configfs_attribute member and function pointers
+ * for the show() and store() operations on that attribute. If they don't
+ * need anything else on the extended attribute structure, they can use
+ * this macro to define it.  The argument _name isends up as
+ * 'struct _name_attribute, as well as names of to CONFIGFS_ATTR_OPS() below.
+ * The argument _item is the name of the structure containing the
+ * struct config_item or struct config_group structure members
+ */
+#define CONFIGFS_EATTR_STRUCT(_name, _item)				\
+struct _name##_attribute {						\
+	struct configfs_attribute attr;					\
+	ssize_t (*show)(struct _item *, char *);			\
+	ssize_t (*store)(struct _item *, const char *, size_t);		\
+}
+
+/*
+ * With the extended attribute structure, users can use this macro
+ * (similar to sysfs' __ATTR) to make defining attributes easier.
+ * An example:
+ * #define MYITEM_EATTR(_name, _mode, _show, _store)	\
+ * struct myitem_attribute childless_attr_##_name =	\
+ *         __CONFIGFS_EATTR(_name, _mode, _show, _store)
+ */
+#define __CONFIGFS_EATTR(_name, _mode, _show, _store)			\
+{									\
+	.attr	= {							\
+			.ca_name = __stringify(_name),			\
+			.ca_mode = _mode,				\
+			.ca_owner = THIS_MODULE,			\
+	},								\
+	.show	= _show,						\
+	.store	= _store,						\
+}
+/* Here is a readonly version, only requiring a show() operation */
+#define __CONFIGFS_EATTR_RO(_name, _show)				\
+{									\
+	.attr	= {							\
+			.ca_name = __stringify(_name),			\
+			.ca_mode = 0444,				\
+			.ca_owner = THIS_MODULE,			\
+	},								\
+	.show	= _show,						\
+}
+
+/*
+ * With these extended attributes, the simple show_attribute() and
+ * store_attribute() operations need to call the show() and store() of the
+ * attributes.  This is a common pattern, so we provide a macro to define
+ * them.  The argument _name is the name of the attribute defined by
+ * CONFIGFS_ATTR_STRUCT(). The argument _item is the name of the structure
+ * containing the struct config_item or struct config_group structure member.
+ * The argument _item_member is the actual name of the struct config_* struct
+ * in your _item structure.  Meaning  my_structure->some_config_group.
+ *		                      ^^_item^^^^^  ^^_item_member^^^
+ * This macro expects the attributes to be named "struct <name>_attribute".
+ */
+#define CONFIGFS_EATTR_OPS_TO_FUNC(_name, _item, _item_member)		\
+static struct _item *to_##_name(struct config_item *ci)			\
+{									\
+	return (ci) ? container_of(to_config_group(ci), struct _item,	\
+		_item_member) : NULL;					\
+}
+
+#define CONFIGFS_EATTR_OPS_SHOW(_name, _item)				\
+static ssize_t _name##_attr_show(struct config_item *item,		\
+				 struct configfs_attribute *attr,	\
+				 char *page)				\
+{									\
+	struct _item *_item = to_##_name(item);				\
+	struct _name##_attribute * _name##_attr =			\
+		container_of(attr, struct _name##_attribute, attr);	\
+	ssize_t ret = 0;						\
+									\
+	if (_name##_attr->show)						\
+		ret = _name##_attr->show(_item, page);			\
+	return ret;							\
+}
+
+#define CONFIGFS_EATTR_OPS_STORE(_name, _item)				\
+static ssize_t _name##_attr_store(struct config_item *item,		\
+				  struct configfs_attribute *attr,	\
+				  const char *page, size_t count)	\
+{									\
+	struct _item *_item = to_##_name(item);				\
+	struct _name##_attribute * _name##_attr =			\
+		container_of(attr, struct _name##_attribute, attr);	\
+	ssize_t ret = -EINVAL;						\
+									\
+	if (_name##_attr->store)					\
+		ret = _name##_attr->store(_item, page, count);		\
+	return ret;							\
+}
+
+#define CONFIGFS_EATTR_OPS(_name, _item, _item_member)			\
+	CONFIGFS_EATTR_OPS_TO_FUNC(_name, _item, _item_member);		\
+	CONFIGFS_EATTR_OPS_SHOW(_name, _item);				\
+	CONFIGFS_EATTR_OPS_STORE(_name, _item);
+
+#define CONFIGFS_EATTR_OPS_RO(_name, _item, _item_member)		\
+	CONFIGFS_EATTR_OPS_TO_FUNC(_name, _item, _item_member);		\
+	CONFIGFS_EATTR_OPS_SHOW(_name, _item);
+
+#endif /* _CONFIGFS_MACROS_H_ */
diff --git a/include/target/target_core_backend.h b/include/target/target_core_backend.h
new file mode 100644
index 00000000..8c9ff1b1
--- /dev/null
+++ b/include/target/target_core_backend.h
@@ -0,0 +1,67 @@
+#ifndef TARGET_CORE_BACKEND_H
+#define TARGET_CORE_BACKEND_H
+
+#define TRANSPORT_PLUGIN_PHBA_PDEV		1
+#define TRANSPORT_PLUGIN_VHBA_PDEV		2
+#define TRANSPORT_PLUGIN_VHBA_VDEV		3
+
+struct se_subsystem_api {
+	struct list_head sub_api_list;
+
+	char name[16];
+	struct module *owner;
+
+	u8 transport_type;
+
+	unsigned int fua_write_emulated : 1;
+	unsigned int write_cache_emulated : 1;
+
+	int (*attach_hba)(struct se_hba *, u32);
+	void (*detach_hba)(struct se_hba *);
+	int (*pmode_enable_hba)(struct se_hba *, unsigned long);
+	void *(*allocate_virtdevice)(struct se_hba *, const char *);
+	struct se_device *(*create_virtdevice)(struct se_hba *,
+				struct se_subsystem_dev *, void *);
+	void (*free_device)(void *);
+	int (*transport_complete)(struct se_task *task);
+	struct se_task *(*alloc_task)(unsigned char *cdb);
+	int (*do_task)(struct se_task *);
+	int (*do_discard)(struct se_device *, sector_t, u32);
+	void (*do_sync_cache)(struct se_task *);
+	void (*free_task)(struct se_task *);
+	ssize_t (*check_configfs_dev_params)(struct se_hba *,
+			struct se_subsystem_dev *);
+	ssize_t (*set_configfs_dev_params)(struct se_hba *,
+			struct se_subsystem_dev *, const char *, ssize_t);
+	ssize_t (*show_configfs_dev_params)(struct se_hba *,
+			struct se_subsystem_dev *, char *);
+	u32 (*get_device_rev)(struct se_device *);
+	u32 (*get_device_type)(struct se_device *);
+	sector_t (*get_blocks)(struct se_device *);
+	unsigned char *(*get_sense_buffer)(struct se_task *);
+};
+
+int	transport_subsystem_register(struct se_subsystem_api *);
+void	transport_subsystem_release(struct se_subsystem_api *);
+
+struct se_device *transport_add_device_to_core_hba(struct se_hba *,
+		struct se_subsystem_api *, struct se_subsystem_dev *, u32,
+		void *, struct se_dev_limits *, const char *, const char *);
+
+void	transport_complete_sync_cache(struct se_cmd *, int);
+void	transport_complete_task(struct se_task *, int);
+
+void	target_get_task_cdb(struct se_task *, unsigned char *);
+
+void	transport_set_vpd_proto_id(struct t10_vpd *, unsigned char *);
+int	transport_set_vpd_assoc(struct t10_vpd *, unsigned char *);
+int	transport_set_vpd_ident_type(struct t10_vpd *, unsigned char *);
+int	transport_set_vpd_ident(struct t10_vpd *, unsigned char *);
+
+/* core helpers also used by command snooping in pscsi */
+void	*transport_kmap_data_sg(struct se_cmd *);
+void	transport_kunmap_data_sg(struct se_cmd *);
+
+void	array_free(void *array, int n);
+
+#endif /* TARGET_CORE_BACKEND_H */
diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h
new file mode 100644
index 00000000..aaccc5f5
--- /dev/null
+++ b/include/target/target_core_base.h
@@ -0,0 +1,960 @@
+#ifndef TARGET_CORE_BASE_H
+#define TARGET_CORE_BASE_H
+
+#include <linux/in.h>
+#include <linux/configfs.h>
+#include <linux/dma-mapping.h>
+#include <linux/blkdev.h>
+#include <scsi/scsi_cmnd.h>
+#include <net/sock.h>
+#include <net/tcp.h>
+
+#define TARGET_CORE_MOD_VERSION		"v4.1.0-rc2-ml"
+#define TARGET_CORE_VERSION		TARGET_CORE_MOD_VERSION
+
+/* Maximum Number of LUNs per Target Portal Group */
+/* Don't raise above 511 or REPORT_LUNS needs to handle >1 page */
+#define TRANSPORT_MAX_LUNS_PER_TPG		256
+/*
+ * By default we use 32-byte CDBs in TCM Core and subsystem plugin code.
+ *
+ * Note that both include/scsi/scsi_cmnd.h:MAX_COMMAND_SIZE and
+ * include/linux/blkdev.h:BLOCK_MAX_CDB as of v2.6.36-rc4 still use
+ * 16-byte CDBs by default and require an extra allocation for
+ * 32-byte CDBs to because of legacy issues.
+ *
+ * Within TCM Core there are no such legacy limitiations, so we go ahead
+ * use 32-byte CDBs by default and use include/scsi/scsi.h:scsi_command_size()
+ * within all TCM Core and subsystem plugin code.
+ */
+#define TCM_MAX_COMMAND_SIZE			32
+/*
+ * From include/scsi/scsi_cmnd.h:SCSI_SENSE_BUFFERSIZE, currently
+ * defined 96, but the real limit is 252 (or 260 including the header)
+ */
+#define TRANSPORT_SENSE_BUFFER			SCSI_SENSE_BUFFERSIZE
+/* Used by transport_send_check_condition_and_sense() */
+#define SPC_SENSE_KEY_OFFSET			2
+#define SPC_ADD_SENSE_LEN_OFFSET		7
+#define SPC_ASC_KEY_OFFSET			12
+#define SPC_ASCQ_KEY_OFFSET			13
+#define TRANSPORT_IQN_LEN			224
+/* Used by target_core_store_alua_lu_gp() and target_core_alua_lu_gp_show_attr_members() */
+#define LU_GROUP_NAME_BUF			256
+/* Used by core_alua_store_tg_pt_gp_info() and target_core_alua_tg_pt_gp_show_attr_members() */
+#define TG_PT_GROUP_NAME_BUF			256
+/* Used to parse VPD into struct t10_vpd */
+#define VPD_TMP_BUF_SIZE			128
+/* Used by transport_generic_cmd_sequencer() */
+#define READ_BLOCK_LEN          		6
+#define READ_CAP_LEN            		8
+#define READ_POSITION_LEN       		20
+#define INQUIRY_LEN				36
+/* Used by transport_get_inquiry_vpd_serial() */
+#define INQUIRY_VPD_SERIAL_LEN			254
+/* Used by transport_get_inquiry_vpd_device_ident() */
+#define INQUIRY_VPD_DEVICE_IDENTIFIER_LEN	254
+
+/* Attempts before moving from SHORT to LONG */
+#define PYX_TRANSPORT_WINDOW_CLOSED_THRESHOLD	3
+#define PYX_TRANSPORT_WINDOW_CLOSED_WAIT_SHORT	3  /* In milliseconds */
+#define PYX_TRANSPORT_WINDOW_CLOSED_WAIT_LONG	10 /* In milliseconds */
+
+#define PYX_TRANSPORT_STATUS_INTERVAL		5 /* In seconds */
+
+/*
+ * struct se_subsystem_dev->su_dev_flags
+*/
+#define SDF_FIRMWARE_VPD_UNIT_SERIAL		0x00000001
+#define SDF_EMULATED_VPD_UNIT_SERIAL		0x00000002
+#define SDF_USING_UDEV_PATH			0x00000004
+#define SDF_USING_ALIAS				0x00000008
+
+/*
+ * struct se_device->dev_flags
+ */
+#define DF_READ_ONLY				0x00000001
+#define DF_SPC2_RESERVATIONS			0x00000002
+#define DF_SPC2_RESERVATIONS_WITH_ISID		0x00000004
+
+/* struct se_dev_attrib sanity values */
+/* Default max_unmap_lba_count */
+#define DA_MAX_UNMAP_LBA_COUNT			0
+/* Default max_unmap_block_desc_count */
+#define DA_MAX_UNMAP_BLOCK_DESC_COUNT		0
+/* Default unmap_granularity */
+#define DA_UNMAP_GRANULARITY_DEFAULT		0
+/* Default unmap_granularity_alignment */
+#define DA_UNMAP_GRANULARITY_ALIGNMENT_DEFAULT	0
+/* Default max transfer length */
+#define DA_FABRIC_MAX_SECTORS			8192
+/* Emulation for Direct Page Out */
+#define DA_EMULATE_DPO				0
+/* Emulation for Forced Unit Access WRITEs */
+#define DA_EMULATE_FUA_WRITE			1
+/* Emulation for Forced Unit Access READs */
+#define DA_EMULATE_FUA_READ			0
+/* Emulation for WriteCache and SYNCHRONIZE_CACHE */
+#define DA_EMULATE_WRITE_CACHE			0
+/* Emulation for UNIT ATTENTION Interlock Control */
+#define DA_EMULATE_UA_INTLLCK_CTRL		0
+/* Emulation for TASK_ABORTED status (TAS) by default */
+#define DA_EMULATE_TAS				1
+/* Emulation for Thin Provisioning UNMAP using block/blk-lib.c:blkdev_issue_discard() */
+#define DA_EMULATE_TPU				0
+/*
+ * Emulation for Thin Provisioning WRITE_SAME w/ UNMAP=1 bit using
+ * block/blk-lib.c:blkdev_issue_discard()
+ */
+#define DA_EMULATE_TPWS				0
+/* No Emulation for PSCSI by default */
+#define DA_EMULATE_RESERVATIONS			0
+/* No Emulation for PSCSI by default */
+#define DA_EMULATE_ALUA				0
+/* Enforce SCSI Initiator Port TransportID with 'ISID' for PR */
+#define DA_ENFORCE_PR_ISIDS			1
+#define DA_STATUS_MAX_SECTORS_MIN		16
+#define DA_STATUS_MAX_SECTORS_MAX		8192
+/* By default don't report non-rotating (solid state) medium */
+#define DA_IS_NONROT				0
+/* Queue Algorithm Modifier default for restricted reordering in control mode page */
+#define DA_EMULATE_REST_REORD			0
+
+#define SE_INQUIRY_BUF				512
+#define SE_MODE_PAGE_BUF			512
+
+/* struct se_hba->hba_flags */
+enum hba_flags_table {
+	HBA_FLAGS_INTERNAL_USE	= 0x01,
+	HBA_FLAGS_PSCSI_MODE	= 0x02,
+};
+
+/* struct se_lun->lun_status */
+enum transport_lun_status_table {
+	TRANSPORT_LUN_STATUS_FREE = 0,
+	TRANSPORT_LUN_STATUS_ACTIVE = 1,
+};
+
+/* struct se_portal_group->se_tpg_type */
+enum transport_tpg_type_table {
+	TRANSPORT_TPG_TYPE_NORMAL = 0,
+	TRANSPORT_TPG_TYPE_DISCOVERY = 1,
+};
+
+/* struct se_task->task_flags */
+enum se_task_flags {
+	TF_ACTIVE		= (1 << 0),
+	TF_SENT			= (1 << 1),
+	TF_REQUEST_STOP		= (1 << 2),
+	TF_HAS_SENSE		= (1 << 3),
+};
+
+/* Special transport agnostic struct se_cmd->t_states */
+enum transport_state_table {
+	TRANSPORT_NO_STATE	= 0,
+	TRANSPORT_NEW_CMD	= 1,
+	TRANSPORT_WRITE_PENDING	= 3,
+	TRANSPORT_PROCESS_WRITE	= 4,
+	TRANSPORT_PROCESSING	= 5,
+	TRANSPORT_COMPLETE	= 6,
+	TRANSPORT_PROCESS_TMR	= 9,
+	TRANSPORT_ISTATE_PROCESSING = 11,
+	TRANSPORT_NEW_CMD_MAP	= 16,
+	TRANSPORT_COMPLETE_QF_WP = 18,
+	TRANSPORT_COMPLETE_QF_OK = 19,
+};
+
+/* Used for struct se_cmd->se_cmd_flags */
+enum se_cmd_flags_table {
+	SCF_SUPPORTED_SAM_OPCODE	= 0x00000001,
+	SCF_TRANSPORT_TASK_SENSE	= 0x00000002,
+	SCF_EMULATED_TASK_SENSE		= 0x00000004,
+	SCF_SCSI_DATA_SG_IO_CDB		= 0x00000008,
+	SCF_SCSI_CONTROL_SG_IO_CDB	= 0x00000010,
+	SCF_SCSI_NON_DATA_CDB		= 0x00000020,
+	SCF_SCSI_TMR_CDB		= 0x00000040,
+	SCF_SCSI_CDB_EXCEPTION		= 0x00000080,
+	SCF_SCSI_RESERVATION_CONFLICT	= 0x00000100,
+	SCF_FUA				= 0x00000200,
+	SCF_SE_LUN_CMD			= 0x00000800,
+	SCF_SE_ALLOW_EOO		= 0x00001000,
+	SCF_BIDI			= 0x00002000,
+	SCF_SENT_CHECK_CONDITION	= 0x00004000,
+	SCF_OVERFLOW_BIT		= 0x00008000,
+	SCF_UNDERFLOW_BIT		= 0x00010000,
+	SCF_SENT_DELAYED_TAS		= 0x00020000,
+	SCF_ALUA_NON_OPTIMIZED		= 0x00040000,
+	SCF_DELAYED_CMD_FROM_SAM_ATTR	= 0x00080000,
+	SCF_UNUSED			= 0x00100000,
+	SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC = 0x00200000,
+	SCF_ACK_KREF			= 0x00400000,
+};
+
+/* struct se_dev_entry->lun_flags and struct se_lun->lun_access */
+enum transport_lunflags_table {
+	TRANSPORT_LUNFLAGS_NO_ACCESS		= 0x00,
+	TRANSPORT_LUNFLAGS_INITIATOR_ACCESS	= 0x01,
+	TRANSPORT_LUNFLAGS_READ_ONLY		= 0x02,
+	TRANSPORT_LUNFLAGS_READ_WRITE		= 0x04,
+};
+
+/* struct se_device->dev_status */
+enum transport_device_status_table {
+	TRANSPORT_DEVICE_ACTIVATED		= 0x01,
+	TRANSPORT_DEVICE_DEACTIVATED		= 0x02,
+	TRANSPORT_DEVICE_QUEUE_FULL		= 0x04,
+	TRANSPORT_DEVICE_SHUTDOWN		= 0x08,
+	TRANSPORT_DEVICE_OFFLINE_ACTIVATED	= 0x10,
+	TRANSPORT_DEVICE_OFFLINE_DEACTIVATED	= 0x20,
+};
+
+/*
+ * Used by transport_send_check_condition_and_sense() and se_cmd->scsi_sense_reason
+ * to signal which ASC/ASCQ sense payload should be built.
+ */
+enum tcm_sense_reason_table {
+	TCM_NON_EXISTENT_LUN			= 0x01,
+	TCM_UNSUPPORTED_SCSI_OPCODE		= 0x02,
+	TCM_INCORRECT_AMOUNT_OF_DATA		= 0x03,
+	TCM_UNEXPECTED_UNSOLICITED_DATA		= 0x04,
+	TCM_SERVICE_CRC_ERROR			= 0x05,
+	TCM_SNACK_REJECTED			= 0x06,
+	TCM_SECTOR_COUNT_TOO_MANY		= 0x07,
+	TCM_INVALID_CDB_FIELD			= 0x08,
+	TCM_INVALID_PARAMETER_LIST		= 0x09,
+	TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE	= 0x0a,
+	TCM_UNKNOWN_MODE_PAGE			= 0x0b,
+	TCM_WRITE_PROTECTED			= 0x0c,
+	TCM_CHECK_CONDITION_ABORT_CMD		= 0x0d,
+	TCM_CHECK_CONDITION_UNIT_ATTENTION	= 0x0e,
+	TCM_CHECK_CONDITION_NOT_READY		= 0x0f,
+	TCM_RESERVATION_CONFLICT		= 0x10,
+};
+
+enum target_sc_flags_table {
+	TARGET_SCF_BIDI_OP		= 0x01,
+	TARGET_SCF_ACK_KREF		= 0x02,
+};
+
+/* fabric independent task management function values */
+enum tcm_tmreq_table {
+	TMR_ABORT_TASK		= 1,
+	TMR_ABORT_TASK_SET	= 2,
+	TMR_CLEAR_ACA		= 3,
+	TMR_CLEAR_TASK_SET	= 4,
+	TMR_LUN_RESET		= 5,
+	TMR_TARGET_WARM_RESET	= 6,
+	TMR_TARGET_COLD_RESET	= 7,
+	TMR_FABRIC_TMR		= 255,
+};
+
+/* fabric independent task management response values */
+enum tcm_tmrsp_table {
+	TMR_FUNCTION_COMPLETE		= 0,
+	TMR_TASK_DOES_NOT_EXIST		= 1,
+	TMR_LUN_DOES_NOT_EXIST		= 2,
+	TMR_TASK_STILL_ALLEGIANT	= 3,
+	TMR_TASK_FAILOVER_NOT_SUPPORTED	= 4,
+	TMR_TASK_MGMT_FUNCTION_NOT_SUPPORTED	= 5,
+	TMR_FUNCTION_AUTHORIZATION_FAILED = 6,
+	TMR_FUNCTION_REJECTED		= 255,
+};
+
+struct se_obj {
+	atomic_t obj_access_count;
+};
+
+/*
+ * Used by TCM Core internally to signal if ALUA emulation is enabled or
+ * disabled, or running in with TCM/pSCSI passthrough mode
+ */
+typedef enum {
+	SPC_ALUA_PASSTHROUGH,
+	SPC2_ALUA_DISABLED,
+	SPC3_ALUA_EMULATED
+} t10_alua_index_t;
+
+/*
+ * Used by TCM Core internally to signal if SAM Task Attribute emulation
+ * is enabled or disabled, or running in with TCM/pSCSI passthrough mode
+ */
+typedef enum {
+	SAM_TASK_ATTR_PASSTHROUGH,
+	SAM_TASK_ATTR_UNTAGGED,
+	SAM_TASK_ATTR_EMULATED
+} t10_task_attr_index_t;
+
+/*
+ * Used for target SCSI statistics
+ */
+typedef enum {
+	SCSI_INST_INDEX,
+	SCSI_DEVICE_INDEX,
+	SCSI_AUTH_INTR_INDEX,
+	SCSI_INDEX_TYPE_MAX
+} scsi_index_t;
+
+struct se_cmd;
+
+struct t10_alua {
+	t10_alua_index_t alua_type;
+	/* ALUA Target Port Group ID */
+	u16	alua_tg_pt_gps_counter;
+	u32	alua_tg_pt_gps_count;
+	spinlock_t tg_pt_gps_lock;
+	struct se_subsystem_dev *t10_sub_dev;
+	/* Used for default ALUA Target Port Group */
+	struct t10_alua_tg_pt_gp *default_tg_pt_gp;
+	/* Used for default ALUA Target Port Group ConfigFS group */
+	struct config_group alua_tg_pt_gps_group;
+	int (*alua_state_check)(struct se_cmd *, unsigned char *, u8 *);
+	struct list_head tg_pt_gps_list;
+};
+
+struct t10_alua_lu_gp {
+	u16	lu_gp_id;
+	int	lu_gp_valid_id;
+	u32	lu_gp_members;
+	atomic_t lu_gp_ref_cnt;
+	spinlock_t lu_gp_lock;
+	struct config_group lu_gp_group;
+	struct list_head lu_gp_node;
+	struct list_head lu_gp_mem_list;
+};
+
+struct t10_alua_lu_gp_member {
+	bool lu_gp_assoc;
+	atomic_t lu_gp_mem_ref_cnt;
+	spinlock_t lu_gp_mem_lock;
+	struct t10_alua_lu_gp *lu_gp;
+	struct se_device *lu_gp_mem_dev;
+	struct list_head lu_gp_mem_list;
+};
+
+struct t10_alua_tg_pt_gp {
+	u16	tg_pt_gp_id;
+	int	tg_pt_gp_valid_id;
+	int	tg_pt_gp_alua_access_status;
+	int	tg_pt_gp_alua_access_type;
+	int	tg_pt_gp_nonop_delay_msecs;
+	int	tg_pt_gp_trans_delay_msecs;
+	int	tg_pt_gp_pref;
+	int	tg_pt_gp_write_metadata;
+	/* Used by struct t10_alua_tg_pt_gp->tg_pt_gp_md_buf_len */
+#define ALUA_MD_BUF_LEN				1024
+	u32	tg_pt_gp_md_buf_len;
+	u32	tg_pt_gp_members;
+	atomic_t tg_pt_gp_alua_access_state;
+	atomic_t tg_pt_gp_ref_cnt;
+	spinlock_t tg_pt_gp_lock;
+	struct mutex tg_pt_gp_md_mutex;
+	struct se_subsystem_dev *tg_pt_gp_su_dev;
+	struct config_group tg_pt_gp_group;
+	struct list_head tg_pt_gp_list;
+	struct list_head tg_pt_gp_mem_list;
+};
+
+struct t10_alua_tg_pt_gp_member {
+	bool tg_pt_gp_assoc;
+	atomic_t tg_pt_gp_mem_ref_cnt;
+	spinlock_t tg_pt_gp_mem_lock;
+	struct t10_alua_tg_pt_gp *tg_pt_gp;
+	struct se_port *tg_pt;
+	struct list_head tg_pt_gp_mem_list;
+};
+
+struct t10_vpd {
+	unsigned char device_identifier[INQUIRY_VPD_DEVICE_IDENTIFIER_LEN];
+	int protocol_identifier_set;
+	u32 protocol_identifier;
+	u32 device_identifier_code_set;
+	u32 association;
+	u32 device_identifier_type;
+	struct list_head vpd_list;
+};
+
+struct t10_wwn {
+	char vendor[8];
+	char model[16];
+	char revision[4];
+	char unit_serial[INQUIRY_VPD_SERIAL_LEN];
+	spinlock_t t10_vpd_lock;
+	struct se_subsystem_dev *t10_sub_dev;
+	struct config_group t10_wwn_group;
+	struct list_head t10_vpd_list;
+};
+
+
+/*
+ * Used by TCM Core internally to signal if >= SPC-3 persistent reservations
+ * emulation is enabled or disabled, or running in with TCM/pSCSI passthrough
+ * mode
+ */
+typedef enum {
+	SPC_PASSTHROUGH,
+	SPC2_RESERVATIONS,
+	SPC3_PERSISTENT_RESERVATIONS
+} t10_reservations_index_t;
+
+struct t10_pr_registration {
+	/* Used for fabrics that contain WWN+ISID */
+#define PR_REG_ISID_LEN				16
+	/* PR_REG_ISID_LEN + ',i,0x' */
+#define PR_REG_ISID_ID_LEN			(PR_REG_ISID_LEN + 5)
+	char pr_reg_isid[PR_REG_ISID_LEN];
+	/* Used during APTPL metadata reading */
+#define PR_APTPL_MAX_IPORT_LEN			256
+	unsigned char pr_iport[PR_APTPL_MAX_IPORT_LEN];
+	/* Used during APTPL metadata reading */
+#define PR_APTPL_MAX_TPORT_LEN			256
+	unsigned char pr_tport[PR_APTPL_MAX_TPORT_LEN];
+	/* For writing out live meta data */
+	unsigned char *pr_aptpl_buf;
+	u16 pr_aptpl_rpti;
+	u16 pr_reg_tpgt;
+	/* Reservation effects all target ports */
+	int pr_reg_all_tg_pt;
+	/* Activate Persistence across Target Power Loss */
+	int pr_reg_aptpl;
+	int pr_res_holder;
+	int pr_res_type;
+	int pr_res_scope;
+	/* Used for fabric initiator WWPNs using a ISID */
+	bool isid_present_at_reg;
+	u32 pr_res_mapped_lun;
+	u32 pr_aptpl_target_lun;
+	u32 pr_res_generation;
+	u64 pr_reg_bin_isid;
+	u64 pr_res_key;
+	atomic_t pr_res_holders;
+	struct se_node_acl *pr_reg_nacl;
+	struct se_dev_entry *pr_reg_deve;
+	struct se_lun *pr_reg_tg_pt_lun;
+	struct list_head pr_reg_list;
+	struct list_head pr_reg_abort_list;
+	struct list_head pr_reg_aptpl_list;
+	struct list_head pr_reg_atp_list;
+	struct list_head pr_reg_atp_mem_list;
+};
+
+/*
+ * This set of function pointer ops is set based upon SPC3_PERSISTENT_RESERVATIONS,
+ * SPC2_RESERVATIONS or SPC_PASSTHROUGH in drivers/target/target_core_pr.c:
+ * core_setup_reservations()
+ */
+struct t10_reservation_ops {
+	int (*t10_reservation_check)(struct se_cmd *, u32 *);
+	int (*t10_seq_non_holder)(struct se_cmd *, unsigned char *, u32);
+	int (*t10_pr_register)(struct se_cmd *);
+	int (*t10_pr_clear)(struct se_cmd *);
+};
+
+struct t10_reservation {
+	/* Reservation effects all target ports */
+	int pr_all_tg_pt;
+	/* Activate Persistence across Target Power Loss enabled
+	 * for SCSI device */
+	int pr_aptpl_active;
+	/* Used by struct t10_reservation->pr_aptpl_buf_len */
+#define PR_APTPL_BUF_LEN			8192
+	u32 pr_aptpl_buf_len;
+	u32 pr_generation;
+	t10_reservations_index_t res_type;
+	spinlock_t registration_lock;
+	spinlock_t aptpl_reg_lock;
+	/*
+	 * This will always be set by one individual I_T Nexus.
+	 * However with all_tg_pt=1, other I_T Nexus from the
+	 * same initiator can access PR reg/res info on a different
+	 * target port.
+	 *
+	 * There is also the 'All Registrants' case, where there is
+	 * a single *pr_res_holder of the reservation, but all
+	 * registrations are considered reservation holders.
+	 */
+	struct se_node_acl *pr_res_holder;
+	struct list_head registration_list;
+	struct list_head aptpl_reg_list;
+	struct t10_reservation_ops pr_ops;
+};
+
+struct se_queue_obj {
+	atomic_t		queue_cnt;
+	spinlock_t		cmd_queue_lock;
+	struct list_head	qobj_list;
+	wait_queue_head_t	thread_wq;
+};
+
+struct se_task {
+	unsigned long long	task_lba;
+	u32			task_sectors;
+	u32			task_size;
+	struct se_cmd		*task_se_cmd;
+	struct scatterlist	*task_sg;
+	u32			task_sg_nents;
+	u16			task_flags;
+	u8			task_scsi_status;
+	enum dma_data_direction	task_data_direction;
+	struct list_head	t_list;
+	struct list_head	t_execute_list;
+	struct list_head	t_state_list;
+	bool			t_state_active;
+	struct completion	task_stop_comp;
+};
+
+struct se_tmr_req {
+	/* Task Management function to be performed */
+	u8			function;
+	/* Task Management response to send */
+	u8			response;
+	int			call_transport;
+	/* Reference to ITT that Task Mgmt should be performed */
+	u32			ref_task_tag;
+	/* 64-bit encoded SAM LUN from $FABRIC_MOD TMR header */
+	u64			ref_task_lun;
+	void 			*fabric_tmr_ptr;
+	struct se_cmd		*task_cmd;
+	struct se_cmd		*ref_cmd;
+	struct se_device	*tmr_dev;
+	struct se_lun		*tmr_lun;
+	struct list_head	tmr_list;
+};
+
+struct se_cmd {
+	/* SAM response code being sent to initiator */
+	u8			scsi_status;
+	u8			scsi_asc;
+	u8			scsi_ascq;
+	u8			scsi_sense_reason;
+	u16			scsi_sense_length;
+	/* Delay for ALUA Active/NonOptimized state access in milliseconds */
+	int			alua_nonop_delay;
+	/* See include/linux/dma-mapping.h */
+	enum dma_data_direction	data_direction;
+	/* For SAM Task Attribute */
+	int			sam_task_attr;
+	/* Transport protocol dependent state, see transport_state_table */
+	enum transport_state_table t_state;
+	/* Used to signal cmd->se_tfo->check_release_cmd() usage per cmd */
+	unsigned		check_release:1;
+	unsigned		cmd_wait_set:1;
+	/* See se_cmd_flags_table */
+	u32			se_cmd_flags;
+	u32			se_ordered_id;
+	/* Total size in bytes associated with command */
+	u32			data_length;
+	/* SCSI Presented Data Transfer Length */
+	u32			cmd_spdtl;
+	u32			residual_count;
+	u32			orig_fe_lun;
+	/* Persistent Reservation key */
+	u64			pr_res_key;
+	/* Used for sense data */
+	void			*sense_buffer;
+	struct list_head	se_delayed_node;
+	struct list_head	se_lun_node;
+	struct list_head	se_qf_node;
+	struct se_device      *se_dev;
+	struct se_dev_entry   *se_deve;
+	struct se_lun		*se_lun;
+	/* Only used for internal passthrough and legacy TCM fabric modules */
+	struct se_session	*se_sess;
+	struct se_tmr_req	*se_tmr_req;
+	struct list_head	se_queue_node;
+	struct list_head	se_cmd_list;
+	struct completion	cmd_wait_comp;
+	struct kref		cmd_kref;
+	struct target_core_fabric_ops *se_tfo;
+	int (*execute_task)(struct se_task *);
+	void (*transport_complete_callback)(struct se_cmd *);
+
+	unsigned char		*t_task_cdb;
+	unsigned char		__t_task_cdb[TCM_MAX_COMMAND_SIZE];
+	unsigned long long	t_task_lba;
+	u32			t_tasks_sg_chained_no;
+	atomic_t		t_fe_count;
+	atomic_t		t_se_count;
+	atomic_t		t_task_cdbs_left;
+	atomic_t		t_task_cdbs_ex_left;
+	atomic_t		t_task_cdbs_sent;
+	unsigned int		transport_state;
+#define CMD_T_ABORTED		(1 << 0)
+#define CMD_T_ACTIVE		(1 << 1)
+#define CMD_T_COMPLETE		(1 << 2)
+#define CMD_T_QUEUED		(1 << 3)
+#define CMD_T_SENT		(1 << 4)
+#define CMD_T_STOP		(1 << 5)
+#define CMD_T_FAILED		(1 << 6)
+#define CMD_T_LUN_STOP		(1 << 7)
+#define CMD_T_LUN_FE_STOP	(1 << 8)
+#define CMD_T_DEV_ACTIVE	(1 << 9)
+	spinlock_t		t_state_lock;
+	struct completion	t_transport_stop_comp;
+	struct completion	transport_lun_fe_stop_comp;
+	struct completion	transport_lun_stop_comp;
+	struct scatterlist	*t_tasks_sg_chained;
+
+	struct work_struct	work;
+
+	struct scatterlist	*t_data_sg;
+	unsigned int		t_data_nents;
+	void			*t_data_vmap;
+	struct scatterlist	*t_bidi_data_sg;
+	unsigned int		t_bidi_data_nents;
+
+	/* Used for BIDI READ */
+	struct list_head	t_task_list;
+	u32			t_task_list_num;
+
+};
+
+struct se_ua {
+	u8			ua_asc;
+	u8			ua_ascq;
+	struct se_node_acl	*ua_nacl;
+	struct list_head	ua_dev_list;
+	struct list_head	ua_nacl_list;
+};
+
+struct se_node_acl {
+	char			initiatorname[TRANSPORT_IQN_LEN];
+	/* Used to signal demo mode created ACL, disabled by default */
+	bool			dynamic_node_acl;
+	bool			acl_stop:1;
+	u32			queue_depth;
+	u32			acl_index;
+	u64			num_cmds;
+	u64			read_bytes;
+	u64			write_bytes;
+	spinlock_t		stats_lock;
+	/* Used for PR SPEC_I_PT=1 and REGISTER_AND_MOVE */
+	atomic_t		acl_pr_ref_count;
+	struct se_dev_entry	**device_list;
+	struct se_session	*nacl_sess;
+	struct se_portal_group *se_tpg;
+	spinlock_t		device_list_lock;
+	spinlock_t		nacl_sess_lock;
+	struct config_group	acl_group;
+	struct config_group	acl_attrib_group;
+	struct config_group	acl_auth_group;
+	struct config_group	acl_param_group;
+	struct config_group	acl_fabric_stat_group;
+	struct config_group	*acl_default_groups[5];
+	struct list_head	acl_list;
+	struct list_head	acl_sess_list;
+	struct completion	acl_free_comp;
+	struct kref		acl_kref;
+};
+
+struct se_session {
+	unsigned		sess_tearing_down:1;
+	u64			sess_bin_isid;
+	struct se_node_acl	*se_node_acl;
+	struct se_portal_group *se_tpg;
+	void			*fabric_sess_ptr;
+	struct list_head	sess_list;
+	struct list_head	sess_acl_list;
+	struct list_head	sess_cmd_list;
+	struct list_head	sess_wait_list;
+	spinlock_t		sess_cmd_lock;
+	struct kref		sess_kref;
+};
+
+struct se_device;
+struct se_transform_info;
+struct scatterlist;
+
+struct se_ml_stat_grps {
+	struct config_group	stat_group;
+	struct config_group	scsi_auth_intr_group;
+	struct config_group	scsi_att_intr_port_group;
+};
+
+struct se_lun_acl {
+	char			initiatorname[TRANSPORT_IQN_LEN];
+	u32			mapped_lun;
+	struct se_node_acl	*se_lun_nacl;
+	struct se_lun		*se_lun;
+	struct list_head	lacl_list;
+	struct config_group	se_lun_group;
+	struct se_ml_stat_grps	ml_stat_grps;
+};
+
+struct se_dev_entry {
+	bool			def_pr_registered;
+	/* See transport_lunflags_table */
+	u32			lun_flags;
+	u32			deve_cmds;
+	u32			mapped_lun;
+	u32			average_bytes;
+	u32			last_byte_count;
+	u32			total_cmds;
+	u32			total_bytes;
+	u64			pr_res_key;
+	u64			creation_time;
+	u32			attach_count;
+	u64			read_bytes;
+	u64			write_bytes;
+	atomic_t		ua_count;
+	/* Used for PR SPEC_I_PT=1 and REGISTER_AND_MOVE */
+	atomic_t		pr_ref_count;
+	struct se_lun_acl	*se_lun_acl;
+	spinlock_t		ua_lock;
+	struct se_lun		*se_lun;
+	struct list_head	alua_port_list;
+	struct list_head	ua_list;
+};
+
+struct se_dev_limits {
+	/* Max supported HW queue depth */
+	u32		hw_queue_depth;
+	/* Max supported virtual queue depth */
+	u32		queue_depth;
+	/* From include/linux/blkdev.h for the other HW/SW limits. */
+	struct queue_limits limits;
+};
+
+struct se_dev_attrib {
+	int		emulate_dpo;
+	int		emulate_fua_write;
+	int		emulate_fua_read;
+	int		emulate_write_cache;
+	int		emulate_ua_intlck_ctrl;
+	int		emulate_tas;
+	int		emulate_tpu;
+	int		emulate_tpws;
+	int		emulate_reservations;
+	int		emulate_alua;
+	int		enforce_pr_isids;
+	int		is_nonrot;
+	int		emulate_rest_reord;
+	u32		hw_block_size;
+	u32		block_size;
+	u32		hw_max_sectors;
+	u32		max_sectors;
+	u32		fabric_max_sectors;
+	u32		optimal_sectors;
+	u32		hw_queue_depth;
+	u32		queue_depth;
+	u32		max_unmap_lba_count;
+	u32		max_unmap_block_desc_count;
+	u32		unmap_granularity;
+	u32		unmap_granularity_alignment;
+	struct se_subsystem_dev *da_sub_dev;
+	struct config_group da_group;
+};
+
+struct se_dev_stat_grps {
+	struct config_group stat_group;
+	struct config_group scsi_dev_group;
+	struct config_group scsi_tgt_dev_group;
+	struct config_group scsi_lu_group;
+};
+
+struct se_subsystem_dev {
+/* Used for struct se_subsystem_dev-->se_dev_alias, must be less than PAGE_SIZE */
+#define SE_DEV_ALIAS_LEN		512
+	unsigned char	se_dev_alias[SE_DEV_ALIAS_LEN];
+/* Used for struct se_subsystem_dev->se_dev_udev_path[], must be less than PAGE_SIZE */
+#define SE_UDEV_PATH_LEN		512
+	unsigned char	se_dev_udev_path[SE_UDEV_PATH_LEN];
+	u32		su_dev_flags;
+	struct se_hba *se_dev_hba;
+	struct se_device *se_dev_ptr;
+	struct se_dev_attrib se_dev_attrib;
+	/* T10 Asymmetric Logical Unit Assignment for Target Ports */
+	struct t10_alua	t10_alua;
+	/* T10 Inquiry and VPD WWN Information */
+	struct t10_wwn	t10_wwn;
+	/* T10 SPC-2 + SPC-3 Reservations */
+	struct t10_reservation t10_pr;
+	spinlock_t      se_dev_lock;
+	void            *se_dev_su_ptr;
+	struct config_group se_dev_group;
+	/* For T10 Reservations */
+	struct config_group se_dev_pr_group;
+	/* For target_core_stat.c groups */
+	struct se_dev_stat_grps dev_stat_grps;
+};
+
+struct se_device {
+	/* RELATIVE TARGET PORT IDENTIFER Counter */
+	u16			dev_rpti_counter;
+	/* Used for SAM Task Attribute ordering */
+	u32			dev_cur_ordered_id;
+	u32			dev_flags;
+	u32			dev_port_count;
+	/* See transport_device_status_table */
+	u32			dev_status;
+	/* Physical device queue depth */
+	u32			queue_depth;
+	/* Used for SPC-2 reservations enforce of ISIDs */
+	u64			dev_res_bin_isid;
+	t10_task_attr_index_t	dev_task_attr_type;
+	/* Pointer to transport specific device structure */
+	void 			*dev_ptr;
+	u32			dev_index;
+	u64			creation_time;
+	u32			num_resets;
+	u64			num_cmds;
+	u64			read_bytes;
+	u64			write_bytes;
+	spinlock_t		stats_lock;
+	/* Active commands on this virtual SE device */
+	atomic_t		simple_cmds;
+	atomic_t		dev_ordered_id;
+	atomic_t		execute_tasks;
+	atomic_t		dev_ordered_sync;
+	atomic_t		dev_qf_count;
+	struct se_obj		dev_obj;
+	struct se_obj		dev_access_obj;
+	struct se_obj		dev_export_obj;
+	struct se_queue_obj	dev_queue_obj;
+	spinlock_t		delayed_cmd_lock;
+	spinlock_t		execute_task_lock;
+	spinlock_t		dev_reservation_lock;
+	spinlock_t		dev_status_lock;
+	spinlock_t		se_port_lock;
+	spinlock_t		se_tmr_lock;
+	spinlock_t		qf_cmd_lock;
+	/* Used for legacy SPC-2 reservationsa */
+	struct se_node_acl	*dev_reserved_node_acl;
+	/* Used for ALUA Logical Unit Group membership */
+	struct t10_alua_lu_gp_member *dev_alua_lu_gp_mem;
+	/* Used for SPC-3 Persistent Reservations */
+	struct t10_pr_registration *dev_pr_res_holder;
+	struct list_head	dev_sep_list;
+	struct list_head	dev_tmr_list;
+	/* Pointer to descriptor for processing thread */
+	struct task_struct	*process_thread;
+	struct work_struct	qf_work_queue;
+	struct list_head	delayed_cmd_list;
+	struct list_head	execute_task_list;
+	struct list_head	state_task_list;
+	struct list_head	qf_cmd_list;
+	/* Pointer to associated SE HBA */
+	struct se_hba		*se_hba;
+	struct se_subsystem_dev *se_sub_dev;
+	/* Pointer to template of function pointers for transport */
+	struct se_subsystem_api *transport;
+	/* Linked list for struct se_hba struct se_device list */
+	struct list_head	dev_list;
+};
+
+struct se_hba {
+	u16			hba_tpgt;
+	u32			hba_id;
+	/* See hba_flags_table */
+	u32			hba_flags;
+	/* Virtual iSCSI devices attached. */
+	u32			dev_count;
+	u32			hba_index;
+	/* Pointer to transport specific host structure. */
+	void			*hba_ptr;
+	/* Linked list for struct se_device */
+	struct list_head	hba_dev_list;
+	struct list_head	hba_node;
+	spinlock_t		device_lock;
+	struct config_group	hba_group;
+	struct mutex		hba_access_mutex;
+	struct se_subsystem_api *transport;
+};
+
+struct se_port_stat_grps {
+	struct config_group stat_group;
+	struct config_group scsi_port_group;
+	struct config_group scsi_tgt_port_group;
+	struct config_group scsi_transport_group;
+};
+
+struct se_lun {
+	/* See transport_lun_status_table */
+	enum transport_lun_status_table lun_status;
+	u32			lun_access;
+	u32			lun_flags;
+	u32			unpacked_lun;
+	atomic_t		lun_acl_count;
+	spinlock_t		lun_acl_lock;
+	spinlock_t		lun_cmd_lock;
+	spinlock_t		lun_sep_lock;
+	struct completion	lun_shutdown_comp;
+	struct list_head	lun_cmd_list;
+	struct list_head	lun_acl_list;
+	struct se_device	*lun_se_dev;
+	struct se_port		*lun_sep;
+	struct config_group	lun_group;
+	struct se_port_stat_grps port_stat_grps;
+};
+
+struct scsi_port_stats {
+       u64     cmd_pdus;
+       u64     tx_data_octets;
+       u64     rx_data_octets;
+};
+
+struct se_port {
+	/* RELATIVE TARGET PORT IDENTIFER */
+	u16		sep_rtpi;
+	int		sep_tg_pt_secondary_stat;
+	int		sep_tg_pt_secondary_write_md;
+	u32		sep_index;
+	struct scsi_port_stats sep_stats;
+	/* Used for ALUA Target Port Groups membership */
+	atomic_t	sep_tg_pt_secondary_offline;
+	/* Used for PR ALL_TG_PT=1 */
+	atomic_t	sep_tg_pt_ref_cnt;
+	spinlock_t	sep_alua_lock;
+	struct mutex	sep_tg_pt_md_mutex;
+	struct t10_alua_tg_pt_gp_member *sep_alua_tg_pt_gp_mem;
+	struct se_lun *sep_lun;
+	struct se_portal_group *sep_tpg;
+	struct list_head sep_alua_list;
+	struct list_head sep_list;
+};
+
+struct se_tpg_np {
+	struct se_portal_group *tpg_np_parent;
+	struct config_group	tpg_np_group;
+};
+
+struct se_portal_group {
+	/* Type of target portal group, see transport_tpg_type_table */
+	enum transport_tpg_type_table se_tpg_type;
+	/* Number of ACLed Initiator Nodes for this TPG */
+	u32			num_node_acls;
+	/* Used for PR SPEC_I_PT=1 and REGISTER_AND_MOVE */
+	atomic_t		tpg_pr_ref_count;
+	/* Spinlock for adding/removing ACLed Nodes */
+	spinlock_t		acl_node_lock;
+	/* Spinlock for adding/removing sessions */
+	spinlock_t		session_lock;
+	spinlock_t		tpg_lun_lock;
+	/* Pointer to $FABRIC_MOD portal group */
+	void			*se_tpg_fabric_ptr;
+	struct list_head	se_tpg_node;
+	/* linked list for initiator ACL list */
+	struct list_head	acl_node_list;
+	struct se_lun		**tpg_lun_list;
+	struct se_lun		tpg_virt_lun0;
+	/* List of TCM sessions associated wth this TPG */
+	struct list_head	tpg_sess_list;
+	/* Pointer to $FABRIC_MOD dependent code */
+	struct target_core_fabric_ops *se_tpg_tfo;
+	struct se_wwn		*se_tpg_wwn;
+	struct config_group	tpg_group;
+	struct config_group	*tpg_default_groups[6];
+	struct config_group	tpg_lun_group;
+	struct config_group	tpg_np_group;
+	struct config_group	tpg_acl_group;
+	struct config_group	tpg_attrib_group;
+	struct config_group	tpg_param_group;
+};
+
+struct se_wwn {
+	struct target_fabric_configfs *wwn_tf;
+	struct config_group	wwn_group;
+	struct config_group	*wwn_default_groups[2];
+	struct config_group	fabric_stat_group;
+};
+
+#endif /* TARGET_CORE_BASE_H */
diff --git a/include/target/target_core_configfs.h b/include/target/target_core_configfs.h
new file mode 100644
index 00000000..61250959
--- /dev/null
+++ b/include/target/target_core_configfs.h
@@ -0,0 +1,56 @@
+#define TARGET_CORE_CONFIGFS_VERSION TARGET_CORE_MOD_VERSION
+
+#define TARGET_CORE_CONFIG_ROOT	"/sys/kernel/config"
+
+#define TARGET_CORE_NAME_MAX_LEN	64
+#define TARGET_FABRIC_NAME_SIZE		32
+
+extern struct target_fabric_configfs *target_fabric_configfs_init(
+				struct module *, const char *);
+extern void target_fabric_configfs_free(struct target_fabric_configfs *);
+extern int target_fabric_configfs_register(struct target_fabric_configfs *);
+extern void target_fabric_configfs_deregister(struct target_fabric_configfs *);
+
+struct target_fabric_configfs_template {
+	struct config_item_type tfc_discovery_cit;
+	struct config_item_type	tfc_wwn_cit;
+	struct config_item_type tfc_wwn_fabric_stats_cit;
+	struct config_item_type tfc_tpg_cit;
+	struct config_item_type tfc_tpg_base_cit;
+	struct config_item_type tfc_tpg_lun_cit;
+	struct config_item_type tfc_tpg_port_cit;
+	struct config_item_type tfc_tpg_port_stat_cit;
+	struct config_item_type tfc_tpg_np_cit;
+	struct config_item_type tfc_tpg_np_base_cit;
+	struct config_item_type tfc_tpg_attrib_cit;
+	struct config_item_type tfc_tpg_param_cit;
+	struct config_item_type tfc_tpg_nacl_cit;
+	struct config_item_type tfc_tpg_nacl_base_cit;
+	struct config_item_type tfc_tpg_nacl_attrib_cit;
+	struct config_item_type tfc_tpg_nacl_auth_cit;
+	struct config_item_type tfc_tpg_nacl_param_cit;
+	struct config_item_type tfc_tpg_nacl_stat_cit;
+	struct config_item_type tfc_tpg_mappedlun_cit;
+	struct config_item_type tfc_tpg_mappedlun_stat_cit;
+};
+
+struct target_fabric_configfs {
+	char			tf_name[TARGET_FABRIC_NAME_SIZE];
+	atomic_t		tf_access_cnt;
+	struct list_head	tf_list;
+	struct config_group	tf_group;
+	struct config_group	tf_disc_group;
+	struct config_group	*tf_default_groups[2];
+	/* Pointer to fabric's config_item */
+	struct config_item	*tf_fabric;
+	/* Passed from fabric modules */
+	struct config_item_type	*tf_fabric_cit;
+	/* Pointer to target core subsystem */
+	struct configfs_subsystem *tf_subsys;
+	/* Pointer to fabric's struct module */
+	struct module *tf_module;
+	struct target_core_fabric_ops tf_ops;
+	struct target_fabric_configfs_template tf_cit_tmpl;
+};
+
+#define TF_CIT_TMPL(tf) (&(tf)->tf_cit_tmpl)
diff --git a/include/target/target_core_fabric.h b/include/target/target_core_fabric.h
new file mode 100644
index 00000000..10c69080
--- /dev/null
+++ b/include/target/target_core_fabric.h
@@ -0,0 +1,191 @@
+#ifndef TARGET_CORE_FABRIC_H
+#define TARGET_CORE_FABRIC_H
+
+struct target_core_fabric_ops {
+	struct configfs_subsystem *tf_subsys;
+	/*
+	 * Optional to signal struct se_task->task_sg[] padding entries
+	 * for scatterlist chaining using transport_do_task_sg_link(),
+	 * disabled by default
+	 */
+	bool task_sg_chaining;
+	char *(*get_fabric_name)(void);
+	u8 (*get_fabric_proto_ident)(struct se_portal_group *);
+	char *(*tpg_get_wwn)(struct se_portal_group *);
+	u16 (*tpg_get_tag)(struct se_portal_group *);
+	u32 (*tpg_get_default_depth)(struct se_portal_group *);
+	u32 (*tpg_get_pr_transport_id)(struct se_portal_group *,
+				struct se_node_acl *,
+				struct t10_pr_registration *, int *,
+				unsigned char *);
+	u32 (*tpg_get_pr_transport_id_len)(struct se_portal_group *,
+				struct se_node_acl *,
+				struct t10_pr_registration *, int *);
+	char *(*tpg_parse_pr_out_transport_id)(struct se_portal_group *,
+				const char *, u32 *, char **);
+	int (*tpg_check_demo_mode)(struct se_portal_group *);
+	int (*tpg_check_demo_mode_cache)(struct se_portal_group *);
+	int (*tpg_check_demo_mode_write_protect)(struct se_portal_group *);
+	int (*tpg_check_prod_mode_write_protect)(struct se_portal_group *);
+	/*
+	 * Optionally used by fabrics to allow demo-mode login, but not
+	 * expose any TPG LUNs, and return 'not connected' in standard
+	 * inquiry response
+	 */
+	int (*tpg_check_demo_mode_login_only)(struct se_portal_group *);
+	struct se_node_acl *(*tpg_alloc_fabric_acl)(
+					struct se_portal_group *);
+	void (*tpg_release_fabric_acl)(struct se_portal_group *,
+					struct se_node_acl *);
+	u32 (*tpg_get_inst_index)(struct se_portal_group *);
+	/*
+	 * Optional function pointer for TCM to perform command map
+	 * from TCM processing thread context, for those struct se_cmd
+	 * initially allocated in interrupt context.
+	 */
+	int (*new_cmd_map)(struct se_cmd *);
+	/*
+	 * Optional to release struct se_cmd and fabric dependent allocated
+	 * I/O descriptor in transport_cmd_check_stop().
+	 *
+	 * Returning 1 will signal a descriptor has been released.
+	 * Returning 0 will signal a descriptor has not been released.
+	 */
+	int (*check_stop_free)(struct se_cmd *);
+	void (*release_cmd)(struct se_cmd *);
+	/*
+	 * Called with spin_lock_bh(struct se_portal_group->session_lock held.
+	 */
+	int (*shutdown_session)(struct se_session *);
+	void (*close_session)(struct se_session *);
+	u32 (*sess_get_index)(struct se_session *);
+	/*
+	 * Used only for SCSI fabrics that contain multi-value TransportIDs
+	 * (like iSCSI).  All other SCSI fabrics should set this to NULL.
+	 */
+	u32 (*sess_get_initiator_sid)(struct se_session *,
+				      unsigned char *, u32);
+	int (*write_pending)(struct se_cmd *);
+	int (*write_pending_status)(struct se_cmd *);
+	void (*set_default_node_attributes)(struct se_node_acl *);
+	u32 (*get_task_tag)(struct se_cmd *);
+	int (*get_cmd_state)(struct se_cmd *);
+	int (*queue_data_in)(struct se_cmd *);
+	int (*queue_status)(struct se_cmd *);
+	int (*queue_tm_rsp)(struct se_cmd *);
+	u16 (*set_fabric_sense_len)(struct se_cmd *, u32);
+	u16 (*get_fabric_sense_len)(void);
+	/*
+	 * fabric module calls for target_core_fabric_configfs.c
+	 */
+	struct se_wwn *(*fabric_make_wwn)(struct target_fabric_configfs *,
+				struct config_group *, const char *);
+	void (*fabric_drop_wwn)(struct se_wwn *);
+	struct se_portal_group *(*fabric_make_tpg)(struct se_wwn *,
+				struct config_group *, const char *);
+	void (*fabric_drop_tpg)(struct se_portal_group *);
+	int (*fabric_post_link)(struct se_portal_group *,
+				struct se_lun *);
+	void (*fabric_pre_unlink)(struct se_portal_group *,
+				struct se_lun *);
+	struct se_tpg_np *(*fabric_make_np)(struct se_portal_group *,
+				struct config_group *, const char *);
+	void (*fabric_drop_np)(struct se_tpg_np *);
+	struct se_node_acl *(*fabric_make_nodeacl)(struct se_portal_group *,
+				struct config_group *, const char *);
+	void (*fabric_drop_nodeacl)(struct se_node_acl *);
+};
+
+struct se_session *transport_init_session(void);
+void	__transport_register_session(struct se_portal_group *,
+		struct se_node_acl *, struct se_session *, void *);
+void	transport_register_session(struct se_portal_group *,
+		struct se_node_acl *, struct se_session *, void *);
+void	target_get_session(struct se_session *);
+int	target_put_session(struct se_session *);
+void	transport_free_session(struct se_session *);
+void	target_put_nacl(struct se_node_acl *);
+void	transport_deregister_session_configfs(struct se_session *);
+void	transport_deregister_session(struct se_session *);
+
+
+void	transport_init_se_cmd(struct se_cmd *, struct target_core_fabric_ops *,
+		struct se_session *, u32, int, int, unsigned char *);
+int	transport_lookup_cmd_lun(struct se_cmd *, u32);
+int	transport_generic_allocate_tasks(struct se_cmd *, unsigned char *);
+void	target_submit_cmd(struct se_cmd *, struct se_session *, unsigned char *,
+		unsigned char *, u32, u32, int, int, int);
+int	target_submit_tmr(struct se_cmd *se_cmd, struct se_session *se_sess,
+		unsigned char *sense, u32 unpacked_lun,
+		void *fabric_tmr_ptr, unsigned char tm_type,
+		gfp_t, unsigned int, int);
+int	transport_handle_cdb_direct(struct se_cmd *);
+int	transport_generic_handle_cdb_map(struct se_cmd *);
+int	transport_generic_handle_data(struct se_cmd *);
+int	transport_generic_map_mem_to_cmd(struct se_cmd *cmd,
+		struct scatterlist *, u32, struct scatterlist *, u32);
+void	transport_do_task_sg_chain(struct se_cmd *);
+int	transport_generic_new_cmd(struct se_cmd *);
+
+void	transport_generic_process_write(struct se_cmd *);
+
+void	transport_generic_free_cmd(struct se_cmd *, int);
+
+bool	transport_wait_for_tasks(struct se_cmd *);
+int	transport_check_aborted_status(struct se_cmd *, int);
+int	transport_send_check_condition_and_sense(struct se_cmd *, u8, int);
+
+void	target_get_sess_cmd(struct se_session *, struct se_cmd *, bool);
+int	target_put_sess_cmd(struct se_session *, struct se_cmd *);
+void	target_splice_sess_cmd_list(struct se_session *);
+void	target_wait_for_sess_cmds(struct se_session *, int);
+
+int	core_alua_check_nonop_delay(struct se_cmd *);
+
+int	core_tmr_alloc_req(struct se_cmd *, void *, u8, gfp_t);
+void	core_tmr_release_req(struct se_tmr_req *);
+int	transport_generic_handle_tmr(struct se_cmd *);
+void	transport_generic_request_failure(struct se_cmd *);
+int	transport_lookup_tmr_lun(struct se_cmd *, u32);
+
+struct se_node_acl *core_tpg_check_initiator_node_acl(struct se_portal_group *,
+		unsigned char *);
+void	core_tpg_clear_object_luns(struct se_portal_group *);
+struct se_node_acl *core_tpg_add_initiator_node_acl(struct se_portal_group *,
+		struct se_node_acl *, const char *, u32);
+int	core_tpg_del_initiator_node_acl(struct se_portal_group *,
+		struct se_node_acl *, int);
+int	core_tpg_set_initiator_node_queue_depth(struct se_portal_group *,
+		unsigned char *, u32, int);
+int	core_tpg_register(struct target_core_fabric_ops *, struct se_wwn *,
+		struct se_portal_group *, void *, int);
+int	core_tpg_deregister(struct se_portal_group *);
+
+/* SAS helpers */
+u8	sas_get_fabric_proto_ident(struct se_portal_group *);
+u32	sas_get_pr_transport_id(struct se_portal_group *, struct se_node_acl *,
+		struct t10_pr_registration *, int *, unsigned char *);
+u32	sas_get_pr_transport_id_len(struct se_portal_group *, struct se_node_acl *,
+		struct t10_pr_registration *, int *);
+char	*sas_parse_pr_out_transport_id(struct se_portal_group *, const char *,
+		u32 *, char **);
+
+/* FC helpers */
+u8	fc_get_fabric_proto_ident(struct se_portal_group *);
+u32	fc_get_pr_transport_id(struct se_portal_group *, struct se_node_acl *,
+		struct t10_pr_registration *, int *, unsigned char *);
+u32	fc_get_pr_transport_id_len(struct se_portal_group *, struct se_node_acl *,
+		struct t10_pr_registration *, int *);
+char	*fc_parse_pr_out_transport_id(struct se_portal_group *, const char *,
+		u32 *, char **);
+
+/* iSCSI helpers */
+u8	iscsi_get_fabric_proto_ident(struct se_portal_group *);
+u32	iscsi_get_pr_transport_id(struct se_portal_group *, struct se_node_acl *,
+		struct t10_pr_registration *, int *, unsigned char *);
+u32	iscsi_get_pr_transport_id_len(struct se_portal_group *, struct se_node_acl *,
+		struct t10_pr_registration *, int *);
+char	*iscsi_parse_pr_out_transport_id(struct se_portal_group *, const char *,
+		u32 *, char **);
+
+#endif /* TARGET_CORE_FABRICH */
diff --git a/include/target/target_core_fabric_configfs.h b/include/target/target_core_fabric_configfs.h
new file mode 100644
index 00000000..a26fb758
--- /dev/null
+++ b/include/target/target_core_fabric_configfs.h
@@ -0,0 +1,106 @@
+/*
+ * Used for tfc_wwn_cit attributes
+ */
+
+#include <target/configfs_macros.h>
+
+CONFIGFS_EATTR_STRUCT(target_fabric_nacl_attrib, se_node_acl);
+#define TF_NACL_ATTRIB_ATTR(_fabric, _name, _mode)			\
+static struct target_fabric_nacl_attrib_attribute _fabric##_nacl_attrib_##_name = \
+	__CONFIGFS_EATTR(_name, _mode,					\
+	_fabric##_nacl_attrib_show_##_name,				\
+	_fabric##_nacl_attrib_store_##_name);
+
+CONFIGFS_EATTR_STRUCT(target_fabric_nacl_auth, se_node_acl);
+#define TF_NACL_AUTH_ATTR(_fabric, _name, _mode)			\
+static struct target_fabric_nacl_auth_attribute _fabric##_nacl_auth_##_name = \
+	__CONFIGFS_EATTR(_name, _mode,					\
+	_fabric##_nacl_auth_show_##_name,				\
+	_fabric##_nacl_auth_store_##_name);
+
+#define TF_NACL_AUTH_ATTR_RO(_fabric, _name)				\
+static struct target_fabric_nacl_auth_attribute _fabric##_nacl_auth_##_name = \
+	__CONFIGFS_EATTR_RO(_name,					\
+	_fabric##_nacl_auth_show_##_name);
+
+CONFIGFS_EATTR_STRUCT(target_fabric_nacl_param, se_node_acl);
+#define TF_NACL_PARAM_ATTR(_fabric, _name, _mode)			\
+static struct target_fabric_nacl_param_attribute _fabric##_nacl_param_##_name = \
+	__CONFIGFS_EATTR(_name, _mode,					\
+	_fabric##_nacl_param_show_##_name,				\
+	_fabric##_nacl_param_store_##_name);
+
+#define TF_NACL_PARAM_ATTR_RO(_fabric, _name)				\
+static struct target_fabric_nacl_param_attribute _fabric##_nacl_param_##_name = \
+	__CONFIGFS_EATTR_RO(_name,					\
+	_fabric##_nacl_param_show_##_name);
+
+
+CONFIGFS_EATTR_STRUCT(target_fabric_nacl_base, se_node_acl);
+#define TF_NACL_BASE_ATTR(_fabric, _name, _mode)			\
+static struct target_fabric_nacl_base_attribute _fabric##_nacl_##_name = \
+	__CONFIGFS_EATTR(_name, _mode,					\
+	_fabric##_nacl_show_##_name,					\
+	_fabric##_nacl_store_##_name);
+
+#define TF_NACL_BASE_ATTR_RO(_fabric, _name)				\
+static struct target_fabric_nacl_base_attribute _fabric##_nacl_##_name = \
+	__CONFIGFS_EATTR_RO(_name,					\
+	_fabric##_nacl_show_##_name);
+
+CONFIGFS_EATTR_STRUCT(target_fabric_np_base, se_tpg_np);
+#define TF_NP_BASE_ATTR(_fabric, _name, _mode)				\
+static struct target_fabric_np_base_attribute _fabric##_np_##_name =	\
+	__CONFIGFS_EATTR(_name, _mode,					\
+	_fabric##_np_show_##_name,					\
+	_fabric##_np_store_##_name);
+
+CONFIGFS_EATTR_STRUCT(target_fabric_tpg_attrib, se_portal_group);
+#define TF_TPG_ATTRIB_ATTR(_fabric, _name, _mode)			\
+static struct target_fabric_tpg_attrib_attribute _fabric##_tpg_attrib_##_name = \
+	__CONFIGFS_EATTR(_name, _mode,					\
+	_fabric##_tpg_attrib_show_##_name,				\
+	_fabric##_tpg_attrib_store_##_name);
+
+
+CONFIGFS_EATTR_STRUCT(target_fabric_tpg_param, se_portal_group);
+#define TF_TPG_PARAM_ATTR(_fabric, _name, _mode)			\
+static struct target_fabric_tpg_param_attribute _fabric##_tpg_param_##_name = \
+	__CONFIGFS_EATTR(_name, _mode,					\
+	_fabric##_tpg_param_show_##_name,				\
+	_fabric##_tpg_param_store_##_name);
+
+
+CONFIGFS_EATTR_STRUCT(target_fabric_tpg, se_portal_group);
+#define TF_TPG_BASE_ATTR(_fabric, _name, _mode)				\
+static struct target_fabric_tpg_attribute _fabric##_tpg_##_name =	\
+	__CONFIGFS_EATTR(_name, _mode,					\
+	_fabric##_tpg_show_##_name,					\
+	_fabric##_tpg_store_##_name);
+
+
+CONFIGFS_EATTR_STRUCT(target_fabric_wwn, target_fabric_configfs);
+#define TF_WWN_ATTR(_fabric, _name, _mode)				\
+static struct target_fabric_wwn_attribute _fabric##_wwn_##_name =	\
+	__CONFIGFS_EATTR(_name, _mode,					\
+	_fabric##_wwn_show_attr_##_name,				\
+	_fabric##_wwn_store_attr_##_name);
+
+#define TF_WWN_ATTR_RO(_fabric, _name)					\
+static struct target_fabric_wwn_attribute _fabric##_wwn_##_name =	\
+	__CONFIGFS_EATTR_RO(_name,					\
+	_fabric##_wwn_show_attr_##_name);
+
+CONFIGFS_EATTR_STRUCT(target_fabric_discovery, target_fabric_configfs);
+#define TF_DISC_ATTR(_fabric, _name, _mode)				\
+static struct target_fabric_discovery_attribute _fabric##_disc_##_name = \
+	__CONFIGFS_EATTR(_name, _mode,					\
+	_fabric##_disc_show_##_name,					\
+	_fabric##_disc_store_##_name);
+
+#define TF_DISC_ATTR_RO(_fabric, _name)					\
+static struct target_fabric_discovery_attribute _fabric##_disc_##_name = \
+	__CONFIGFS_EATTR_RO(_name,					\
+	_fabric##_disc_show_##_name);
+
+extern int target_fabric_setup_cits(struct target_fabric_configfs *);
diff --git a/include/trace/define_trace.h b/include/trace/define_trace.h
new file mode 100644
index 00000000..b0b4eb24
--- /dev/null
+++ b/include/trace/define_trace.h
@@ -0,0 +1,113 @@
+/*
+ * Trace files that want to automate creationg of all tracepoints defined
+ * in their file should include this file. The following are macros that the
+ * trace file may define:
+ *
+ * TRACE_SYSTEM defines the system the tracepoint is for
+ *
+ * TRACE_INCLUDE_FILE if the file name is something other than TRACE_SYSTEM.h
+ *     This macro may be defined to tell define_trace.h what file to include.
+ *     Note, leave off the ".h".
+ *
+ * TRACE_INCLUDE_PATH if the path is something other than core kernel include/trace
+ *     then this macro can define the path to use. Note, the path is relative to
+ *     define_trace.h, not the file including it. Full path names for out of tree
+ *     modules must be used.
+ */
+
+#ifdef CREATE_TRACE_POINTS
+
+/* Prevent recursion */
+#undef CREATE_TRACE_POINTS
+
+#include <linux/stringify.h>
+
+#undef TRACE_EVENT
+#define TRACE_EVENT(name, proto, args, tstruct, assign, print)	\
+	DEFINE_TRACE(name)
+
+#undef TRACE_EVENT_CONDITION
+#define TRACE_EVENT_CONDITION(name, proto, args, cond, tstruct, assign, print) \
+	TRACE_EVENT(name,						\
+		PARAMS(proto),						\
+		PARAMS(args),						\
+		PARAMS(tstruct),					\
+		PARAMS(assign),						\
+		PARAMS(print))
+
+#undef TRACE_EVENT_FN
+#define TRACE_EVENT_FN(name, proto, args, tstruct,		\
+		assign, print, reg, unreg)			\
+	DEFINE_TRACE_FN(name, reg, unreg)
+
+#undef DEFINE_EVENT
+#define DEFINE_EVENT(template, name, proto, args) \
+	DEFINE_TRACE(name)
+
+#undef DEFINE_EVENT_PRINT
+#define DEFINE_EVENT_PRINT(template, name, proto, args, print)	\
+	DEFINE_TRACE(name)
+
+#undef DEFINE_EVENT_CONDITION
+#define DEFINE_EVENT_CONDITION(template, name, proto, args, cond) \
+	DEFINE_EVENT(template, name, PARAMS(proto), PARAMS(args))
+
+#undef DECLARE_TRACE
+#define DECLARE_TRACE(name, proto, args)	\
+	DEFINE_TRACE(name)
+
+#undef TRACE_INCLUDE
+#undef __TRACE_INCLUDE
+
+#ifndef TRACE_INCLUDE_FILE
+# define TRACE_INCLUDE_FILE TRACE_SYSTEM
+# define UNDEF_TRACE_INCLUDE_FILE
+#endif
+
+#ifndef TRACE_INCLUDE_PATH
+# define __TRACE_INCLUDE(system) <trace/events/system.h>
+# define UNDEF_TRACE_INCLUDE_PATH
+#else
+# define __TRACE_INCLUDE(system) __stringify(TRACE_INCLUDE_PATH/system.h)
+#endif
+
+# define TRACE_INCLUDE(system) __TRACE_INCLUDE(system)
+
+/* Let the trace headers be reread */
+#define TRACE_HEADER_MULTI_READ
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+
+/* Make all open coded DECLARE_TRACE nops */
+#undef DECLARE_TRACE
+#define DECLARE_TRACE(name, proto, args)
+
+#ifdef CONFIG_EVENT_TRACING
+#include <trace/ftrace.h>
+#endif
+
+#undef TRACE_EVENT
+#undef TRACE_EVENT_FN
+#undef TRACE_EVENT_CONDITION
+#undef DECLARE_EVENT_CLASS
+#undef DEFINE_EVENT
+#undef DEFINE_EVENT_PRINT
+#undef DEFINE_EVENT_CONDITION
+#undef TRACE_HEADER_MULTI_READ
+#undef DECLARE_TRACE
+
+/* Only undef what we defined in this file */
+#ifdef UNDEF_TRACE_INCLUDE_FILE
+# undef TRACE_INCLUDE_FILE
+# undef UNDEF_TRACE_INCLUDE_FILE
+#endif
+
+#ifdef UNDEF_TRACE_INCLUDE_PATH
+# undef TRACE_INCLUDE_PATH
+# undef UNDEF_TRACE_INCLUDE_PATH
+#endif
+
+/* We may be processing more files */
+#define CREATE_TRACE_POINTS
+
+#endif /* CREATE_TRACE_POINTS */
diff --git a/include/trace/events/9p.h b/include/trace/events/9p.h
new file mode 100644
index 00000000..beeaed83
--- /dev/null
+++ b/include/trace/events/9p.h
@@ -0,0 +1,176 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM 9p
+
+#if !defined(_TRACE_9P_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_9P_H
+
+#include <linux/tracepoint.h>
+
+#define show_9p_op(type)						\
+	__print_symbolic(type,						\
+			 { P9_TLERROR,		"P9_TLERROR" },		\
+			 { P9_RLERROR,		"P9_RLERROR" },		\
+			 { P9_TSTATFS,		"P9_TSTATFS" },		\
+			 { P9_RSTATFS,		"P9_RSTATFS" },		\
+			 { P9_TLOPEN,		"P9_TLOPEN" },		\
+			 { P9_RLOPEN,		"P9_RLOPEN" },		\
+			 { P9_TLCREATE,		"P9_TLCREATE" },	\
+			 { P9_RLCREATE,		"P9_RLCREATE" },	\
+			 { P9_TSYMLINK,		"P9_TSYMLINK" },	\
+			 { P9_RSYMLINK,		"P9_RSYMLINK" },	\
+			 { P9_TMKNOD,		"P9_TMKNOD" },		\
+			 { P9_RMKNOD,		"P9_RMKNOD" },		\
+			 { P9_TRENAME,		"P9_TRENAME" },		\
+			 { P9_RRENAME,		"P9_RRENAME" },		\
+			 { P9_TREADLINK,	"P9_TREADLINK" },	\
+			 { P9_RREADLINK,	"P9_RREADLINK" },	\
+			 { P9_TGETATTR,		"P9_TGETATTR" },	\
+			 { P9_RGETATTR,		"P9_RGETATTR" },	\
+			 { P9_TSETATTR,		"P9_TSETATTR" },	\
+			 { P9_RSETATTR,		"P9_RSETATTR" },	\
+			 { P9_TXATTRWALK,	"P9_TXATTRWALK" },	\
+			 { P9_RXATTRWALK,	"P9_RXATTRWALK" },	\
+			 { P9_TXATTRCREATE,	"P9_TXATTRCREATE" },	\
+			 { P9_RXATTRCREATE,	"P9_RXATTRCREATE" },	\
+			 { P9_TREADDIR,		"P9_TREADDIR" },	\
+			 { P9_RREADDIR,		"P9_RREADDIR" },	\
+			 { P9_TFSYNC,		"P9_TFSYNC" },		\
+			 { P9_RFSYNC,		"P9_RFSYNC" },		\
+			 { P9_TLOCK,		"P9_TLOCK" },		\
+			 { P9_RLOCK,		"P9_RLOCK" },		\
+			 { P9_TGETLOCK,		"P9_TGETLOCK" },	\
+			 { P9_RGETLOCK,		"P9_RGETLOCK" },	\
+			 { P9_TLINK,		"P9_TLINK" },		\
+			 { P9_RLINK,		"P9_RLINK" },		\
+			 { P9_TMKDIR,		"P9_TMKDIR" },		\
+			 { P9_RMKDIR,		"P9_RMKDIR" },		\
+			 { P9_TRENAMEAT,	"P9_TRENAMEAT" },	\
+			 { P9_RRENAMEAT,	"P9_RRENAMEAT" },	\
+			 { P9_TUNLINKAT,	"P9_TUNLINKAT" },	\
+			 { P9_RUNLINKAT,	"P9_RUNLINKAT" },	\
+			 { P9_TVERSION,		"P9_TVERSION" },	\
+			 { P9_RVERSION,		"P9_RVERSION" },	\
+			 { P9_TAUTH,		"P9_TAUTH" },		\
+			 { P9_RAUTH,		"P9_RAUTH" },		\
+			 { P9_TATTACH,		"P9_TATTACH" },		\
+			 { P9_RATTACH,		"P9_RATTACH" },		\
+			 { P9_TERROR,		"P9_TERROR" },		\
+			 { P9_RERROR,		"P9_RERROR" },		\
+			 { P9_TFLUSH,		"P9_TFLUSH" },		\
+			 { P9_RFLUSH,		"P9_RFLUSH" },		\
+			 { P9_TWALK,		"P9_TWALK" },		\
+			 { P9_RWALK,		"P9_RWALK" },		\
+			 { P9_TOPEN,		"P9_TOPEN" },		\
+			 { P9_ROPEN,		"P9_ROPEN" },		\
+			 { P9_TCREATE,		"P9_TCREATE" },		\
+			 { P9_RCREATE,		"P9_RCREATE" },		\
+			 { P9_TREAD,		"P9_TREAD" },		\
+			 { P9_RREAD,		"P9_RREAD" },		\
+			 { P9_TWRITE,		"P9_TWRITE" },		\
+			 { P9_RWRITE,		"P9_RWRITE" },		\
+			 { P9_TCLUNK,		"P9_TCLUNK" },		\
+			 { P9_RCLUNK,		"P9_RCLUNK" },		\
+			 { P9_TREMOVE,		"P9_TREMOVE" },		\
+			 { P9_RREMOVE,		"P9_RREMOVE" },		\
+			 { P9_TSTAT,		"P9_TSTAT" },		\
+			 { P9_RSTAT,		"P9_RSTAT" },		\
+			 { P9_TWSTAT,		"P9_TWSTAT" },		\
+			 { P9_RWSTAT,		"P9_RWSTAT" })
+
+TRACE_EVENT(9p_client_req,
+	    TP_PROTO(struct p9_client *clnt, int8_t type, int tag),
+
+	    TP_ARGS(clnt, type, tag),
+
+	    TP_STRUCT__entry(
+		    __field(    void *,		clnt			     )
+		    __field(	__u8,		type			     )
+		    __field(	__u32,		tag			     )
+		    ),
+
+	    TP_fast_assign(
+		    __entry->clnt    =  clnt;
+		    __entry->type    =  type;
+		    __entry->tag     =  tag;
+		    ),
+
+	    TP_printk("client %lu request %s tag  %d",
+		    (long)__entry->clnt, show_9p_op(__entry->type),
+		    __entry->tag)
+ );
+
+TRACE_EVENT(9p_client_res,
+	    TP_PROTO(struct p9_client *clnt, int8_t type, int tag, int err),
+
+	    TP_ARGS(clnt, type, tag, err),
+
+	    TP_STRUCT__entry(
+		    __field(    void *,		clnt			     )
+		    __field(	__u8,		type			     )
+		    __field(	__u32,		tag			     )
+		    __field(	__u32,		err			     )
+		    ),
+
+	    TP_fast_assign(
+		    __entry->clnt    =  clnt;
+		    __entry->type    =  type;
+		    __entry->tag     =  tag;
+		    __entry->err     =  err;
+		    ),
+
+	    TP_printk("client %lu response %s tag  %d err %d",
+		      (long)__entry->clnt, show_9p_op(__entry->type),
+		      __entry->tag, __entry->err)
+);
+
+/* dump 32 bytes of protocol data */
+#define P9_PROTO_DUMP_SZ 32
+TRACE_EVENT(9p_protocol_dump,
+	    TP_PROTO(struct p9_client *clnt, struct p9_fcall *pdu),
+
+	    TP_ARGS(clnt, pdu),
+
+	    TP_STRUCT__entry(
+		    __field(	void *,		clnt				)
+		    __field(	__u8,		type				)
+		    __field(	__u16,		tag				)
+		    __array(	unsigned char,	line,	P9_PROTO_DUMP_SZ	)
+		    ),
+
+	    TP_fast_assign(
+		    __entry->clnt   =  clnt;
+		    __entry->type   =  pdu->id;
+		    __entry->tag    =  pdu->tag;
+		    memcpy(__entry->line, pdu->sdata, P9_PROTO_DUMP_SZ);
+		    ),
+	    TP_printk("clnt %lu %s(tag = %d)\n%.3x: "
+		      "%02x %02x %02x %02x %02x %02x %02x %02x "
+		      "%02x %02x %02x %02x %02x %02x %02x %02x\n"
+		      "%.3x: "
+		      "%02x %02x %02x %02x %02x %02x %02x %02x "
+		      "%02x %02x %02x %02x %02x %02x %02x %02x\n",
+		      (long)__entry->clnt, show_9p_op(__entry->type),
+		      __entry->tag, 0,
+		      __entry->line[0],  __entry->line[1],
+		      __entry->line[2],  __entry->line[3],
+		      __entry->line[4],  __entry->line[5],
+		      __entry->line[6],  __entry->line[7],
+		      __entry->line[8],  __entry->line[9],
+		      __entry->line[10], __entry->line[11],
+		      __entry->line[12], __entry->line[13],
+		      __entry->line[14], __entry->line[15],
+		      16,
+		      __entry->line[16], __entry->line[17],
+		      __entry->line[18], __entry->line[19],
+		      __entry->line[20], __entry->line[21],
+		      __entry->line[22], __entry->line[23],
+		      __entry->line[24], __entry->line[25],
+		      __entry->line[26], __entry->line[27],
+		      __entry->line[28], __entry->line[29],
+		      __entry->line[30], __entry->line[31])
+ );
+
+#endif /* _TRACE_9P_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/asoc.h b/include/trace/events/asoc.h
new file mode 100644
index 00000000..ab26f8aa
--- /dev/null
+++ b/include/trace/events/asoc.h
@@ -0,0 +1,330 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM asoc
+
+#if !defined(_TRACE_ASOC_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_ASOC_H
+
+#include <linux/ktime.h>
+#include <linux/tracepoint.h>
+
+struct snd_soc_jack;
+struct snd_soc_codec;
+struct snd_soc_platform;
+struct snd_soc_card;
+struct snd_soc_dapm_widget;
+
+/*
+ * Log register events
+ */
+DECLARE_EVENT_CLASS(snd_soc_reg,
+
+	TP_PROTO(struct snd_soc_codec *codec, unsigned int reg,
+		 unsigned int val),
+
+	TP_ARGS(codec, reg, val),
+
+	TP_STRUCT__entry(
+		__string(	name,		codec->name	)
+		__field(	int,		id		)
+		__field(	unsigned int,	reg		)
+		__field(	unsigned int,	val		)
+	),
+
+	TP_fast_assign(
+		__assign_str(name, codec->name);
+		__entry->id = codec->id;
+		__entry->reg = reg;
+		__entry->val = val;
+	),
+
+	TP_printk("codec=%s.%d reg=%x val=%x", __get_str(name),
+		  (int)__entry->id, (unsigned int)__entry->reg,
+		  (unsigned int)__entry->val)
+);
+
+DEFINE_EVENT(snd_soc_reg, snd_soc_reg_write,
+
+	TP_PROTO(struct snd_soc_codec *codec, unsigned int reg,
+		 unsigned int val),
+
+	TP_ARGS(codec, reg, val)
+
+);
+
+DEFINE_EVENT(snd_soc_reg, snd_soc_reg_read,
+
+	TP_PROTO(struct snd_soc_codec *codec, unsigned int reg,
+		 unsigned int val),
+
+	TP_ARGS(codec, reg, val)
+
+);
+
+DECLARE_EVENT_CLASS(snd_soc_preg,
+
+	TP_PROTO(struct snd_soc_platform *platform, unsigned int reg,
+		 unsigned int val),
+
+	TP_ARGS(platform, reg, val),
+
+	TP_STRUCT__entry(
+		__string(	name,		platform->name	)
+		__field(	int,		id		)
+		__field(	unsigned int,	reg		)
+		__field(	unsigned int,	val		)
+	),
+
+	TP_fast_assign(
+		__assign_str(name, platform->name);
+		__entry->id = platform->id;
+		__entry->reg = reg;
+		__entry->val = val;
+	),
+
+	TP_printk("platform=%s.%d reg=%x val=%x", __get_str(name),
+		  (int)__entry->id, (unsigned int)__entry->reg,
+		  (unsigned int)__entry->val)
+);
+
+DEFINE_EVENT(snd_soc_preg, snd_soc_preg_write,
+
+	TP_PROTO(struct snd_soc_platform *platform, unsigned int reg,
+		 unsigned int val),
+
+	TP_ARGS(platform, reg, val)
+
+);
+
+DEFINE_EVENT(snd_soc_preg, snd_soc_preg_read,
+
+	TP_PROTO(struct snd_soc_platform *platform, unsigned int reg,
+		 unsigned int val),
+
+	TP_ARGS(platform, reg, val)
+
+);
+
+DECLARE_EVENT_CLASS(snd_soc_card,
+
+	TP_PROTO(struct snd_soc_card *card, int val),
+
+	TP_ARGS(card, val),
+
+	TP_STRUCT__entry(
+		__string(	name,		card->name	)
+		__field(	int,		val		)
+	),
+
+	TP_fast_assign(
+		__assign_str(name, card->name);
+		__entry->val = val;
+	),
+
+	TP_printk("card=%s val=%d", __get_str(name), (int)__entry->val)
+);
+
+DEFINE_EVENT(snd_soc_card, snd_soc_bias_level_start,
+
+	TP_PROTO(struct snd_soc_card *card, int val),
+
+	TP_ARGS(card, val)
+
+);
+
+DEFINE_EVENT(snd_soc_card, snd_soc_bias_level_done,
+
+	TP_PROTO(struct snd_soc_card *card, int val),
+
+	TP_ARGS(card, val)
+
+);
+
+DECLARE_EVENT_CLASS(snd_soc_dapm_basic,
+
+	TP_PROTO(struct snd_soc_card *card),
+
+	TP_ARGS(card),
+
+	TP_STRUCT__entry(
+		__string(	name,	card->name	)
+	),
+
+	TP_fast_assign(
+		__assign_str(name, card->name);
+	),
+
+	TP_printk("card=%s", __get_str(name))
+);
+
+DEFINE_EVENT(snd_soc_dapm_basic, snd_soc_dapm_start,
+
+	TP_PROTO(struct snd_soc_card *card),
+
+	TP_ARGS(card)
+
+);
+
+DEFINE_EVENT(snd_soc_dapm_basic, snd_soc_dapm_done,
+
+	TP_PROTO(struct snd_soc_card *card),
+
+	TP_ARGS(card)
+
+);
+
+DECLARE_EVENT_CLASS(snd_soc_dapm_widget,
+
+	TP_PROTO(struct snd_soc_dapm_widget *w, int val),
+
+	TP_ARGS(w, val),
+
+	TP_STRUCT__entry(
+		__string(	name,	w->name		)
+		__field(	int,	val		)
+	),
+
+	TP_fast_assign(
+		__assign_str(name, w->name);
+		__entry->val = val;
+	),
+
+	TP_printk("widget=%s val=%d", __get_str(name),
+		  (int)__entry->val)
+);
+
+DEFINE_EVENT(snd_soc_dapm_widget, snd_soc_dapm_widget_power,
+
+	TP_PROTO(struct snd_soc_dapm_widget *w, int val),
+
+	TP_ARGS(w, val)
+
+);
+
+DEFINE_EVENT(snd_soc_dapm_widget, snd_soc_dapm_widget_event_start,
+
+	TP_PROTO(struct snd_soc_dapm_widget *w, int val),
+
+	TP_ARGS(w, val)
+
+);
+
+DEFINE_EVENT(snd_soc_dapm_widget, snd_soc_dapm_widget_event_done,
+
+	TP_PROTO(struct snd_soc_dapm_widget *w, int val),
+
+	TP_ARGS(w, val)
+
+);
+
+TRACE_EVENT(snd_soc_dapm_walk_done,
+
+	TP_PROTO(struct snd_soc_card *card),
+
+	TP_ARGS(card),
+
+	TP_STRUCT__entry(
+		__string(	name,	card->name		)
+		__field(	int,	power_checks		)
+		__field(	int,	path_checks		)
+		__field(	int,	neighbour_checks	)
+	),
+
+	TP_fast_assign(
+		__assign_str(name, card->name);
+		__entry->power_checks = card->dapm_stats.power_checks;
+		__entry->path_checks = card->dapm_stats.path_checks;
+		__entry->neighbour_checks = card->dapm_stats.neighbour_checks;
+	),
+
+	TP_printk("%s: checks %d power, %d path, %d neighbour",
+		  __get_str(name), (int)__entry->power_checks,
+		  (int)__entry->path_checks, (int)__entry->neighbour_checks)
+);
+
+TRACE_EVENT(snd_soc_jack_irq,
+
+	TP_PROTO(const char *name),
+
+	TP_ARGS(name),
+
+	TP_STRUCT__entry(
+		__string(	name,	name		)
+	),
+
+	TP_fast_assign(
+		__assign_str(name, name);
+	),
+
+	TP_printk("%s", __get_str(name))
+);
+
+TRACE_EVENT(snd_soc_jack_report,
+
+	TP_PROTO(struct snd_soc_jack *jack, int mask, int val),
+
+	TP_ARGS(jack, mask, val),
+
+	TP_STRUCT__entry(
+		__string(	name,		jack->jack->name	)
+		__field(	int,		mask			)
+		__field(	int,		val			)
+	),
+
+	TP_fast_assign(
+		__assign_str(name, jack->jack->name);
+		__entry->mask = mask;
+		__entry->val = val;
+	),
+
+	TP_printk("jack=%s %x/%x", __get_str(name), (int)__entry->val,
+		  (int)__entry->mask)
+);
+
+TRACE_EVENT(snd_soc_jack_notify,
+
+	TP_PROTO(struct snd_soc_jack *jack, int val),
+
+	TP_ARGS(jack, val),
+
+	TP_STRUCT__entry(
+		__string(	name,		jack->jack->name	)
+		__field(	int,		val			)
+	),
+
+	TP_fast_assign(
+		__assign_str(name, jack->jack->name);
+		__entry->val = val;
+	),
+
+	TP_printk("jack=%s %x", __get_str(name), (int)__entry->val)
+);
+
+TRACE_EVENT(snd_soc_cache_sync,
+
+	TP_PROTO(struct snd_soc_codec *codec, const char *type,
+		 const char *status),
+
+	TP_ARGS(codec, type, status),
+
+	TP_STRUCT__entry(
+		__string(	name,		codec->name	)
+		__string(	status,		status		)
+		__string(	type,		type		)
+		__field(	int,		id		)
+	),
+
+	TP_fast_assign(
+		__assign_str(name, codec->name);
+		__assign_str(status, status);
+		__assign_str(type, type);
+		__entry->id = codec->id;
+	),
+
+	TP_printk("codec=%s.%d type=%s status=%s", __get_str(name),
+		  (int)__entry->id, __get_str(type), __get_str(status))
+);
+
+#endif /* _TRACE_ASOC_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/block.h b/include/trace/events/block.h
new file mode 100644
index 00000000..05c5e61f
--- /dev/null
+++ b/include/trace/events/block.h
@@ -0,0 +1,571 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM block
+
+#if !defined(_TRACE_BLOCK_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_BLOCK_H
+
+#include <linux/blktrace_api.h>
+#include <linux/blkdev.h>
+#include <linux/tracepoint.h>
+
+#define RWBS_LEN	8
+
+DECLARE_EVENT_CLASS(block_rq_with_error,
+
+	TP_PROTO(struct request_queue *q, struct request *rq),
+
+	TP_ARGS(q, rq),
+
+	TP_STRUCT__entry(
+		__field(  dev_t,	dev			)
+		__field(  sector_t,	sector			)
+		__field(  unsigned int,	nr_sector		)
+		__field(  int,		errors			)
+		__array(  char,		rwbs,	RWBS_LEN	)
+		__dynamic_array( char,	cmd,	blk_cmd_buf_len(rq)	)
+	),
+
+	TP_fast_assign(
+		__entry->dev	   = rq->rq_disk ? disk_devt(rq->rq_disk) : 0;
+		__entry->sector    = (rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+					0 : blk_rq_pos(rq);
+		__entry->nr_sector = (rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+					0 : blk_rq_sectors(rq);
+		__entry->errors    = rq->errors;
+
+		blk_fill_rwbs(__entry->rwbs, rq->cmd_flags, blk_rq_bytes(rq));
+		blk_dump_cmd(__get_str(cmd), rq);
+	),
+
+	TP_printk("%d,%d %s (%s) %llu + %u [%d]",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->rwbs, __get_str(cmd),
+		  (unsigned long long)__entry->sector,
+		  __entry->nr_sector, __entry->errors)
+);
+
+/**
+ * block_rq_abort - abort block operation request
+ * @q: queue containing the block operation request
+ * @rq: block IO operation request
+ *
+ * Called immediately after pending block IO operation request @rq in
+ * queue @q is aborted. The fields in the operation request @rq
+ * can be examined to determine which device and sectors the pending
+ * operation would access.
+ */
+DEFINE_EVENT(block_rq_with_error, block_rq_abort,
+
+	TP_PROTO(struct request_queue *q, struct request *rq),
+
+	TP_ARGS(q, rq)
+);
+
+/**
+ * block_rq_requeue - place block IO request back on a queue
+ * @q: queue holding operation
+ * @rq: block IO operation request
+ *
+ * The block operation request @rq is being placed back into queue
+ * @q.  For some reason the request was not completed and needs to be
+ * put back in the queue.
+ */
+DEFINE_EVENT(block_rq_with_error, block_rq_requeue,
+
+	TP_PROTO(struct request_queue *q, struct request *rq),
+
+	TP_ARGS(q, rq)
+);
+
+/**
+ * block_rq_complete - block IO operation completed by device driver
+ * @q: queue containing the block operation request
+ * @rq: block operations request
+ *
+ * The block_rq_complete tracepoint event indicates that some portion
+ * of operation request has been completed by the device driver.  If
+ * the @rq->bio is %NULL, then there is absolutely no additional work to
+ * do for the request. If @rq->bio is non-NULL then there is
+ * additional work required to complete the request.
+ */
+DEFINE_EVENT(block_rq_with_error, block_rq_complete,
+
+	TP_PROTO(struct request_queue *q, struct request *rq),
+
+	TP_ARGS(q, rq)
+);
+
+DECLARE_EVENT_CLASS(block_rq,
+
+	TP_PROTO(struct request_queue *q, struct request *rq),
+
+	TP_ARGS(q, rq),
+
+	TP_STRUCT__entry(
+		__field(  dev_t,	dev			)
+		__field(  sector_t,	sector			)
+		__field(  unsigned int,	nr_sector		)
+		__field(  unsigned int,	bytes			)
+		__array(  char,		rwbs,	RWBS_LEN	)
+		__array(  char,         comm,   TASK_COMM_LEN   )
+		__dynamic_array( char,	cmd,	blk_cmd_buf_len(rq)	)
+	),
+
+	TP_fast_assign(
+		__entry->dev	   = rq->rq_disk ? disk_devt(rq->rq_disk) : 0;
+		__entry->sector    = (rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+					0 : blk_rq_pos(rq);
+		__entry->nr_sector = (rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+					0 : blk_rq_sectors(rq);
+		__entry->bytes     = (rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
+					blk_rq_bytes(rq) : 0;
+
+		blk_fill_rwbs(__entry->rwbs, rq->cmd_flags, blk_rq_bytes(rq));
+		blk_dump_cmd(__get_str(cmd), rq);
+		memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
+	),
+
+	TP_printk("%d,%d %s %u (%s) %llu + %u [%s]",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->rwbs, __entry->bytes, __get_str(cmd),
+		  (unsigned long long)__entry->sector,
+		  __entry->nr_sector, __entry->comm)
+);
+
+/**
+ * block_rq_insert - insert block operation request into queue
+ * @q: target queue
+ * @rq: block IO operation request
+ *
+ * Called immediately before block operation request @rq is inserted
+ * into queue @q.  The fields in the operation request @rq struct can
+ * be examined to determine which device and sectors the pending
+ * operation would access.
+ */
+DEFINE_EVENT(block_rq, block_rq_insert,
+
+	TP_PROTO(struct request_queue *q, struct request *rq),
+
+	TP_ARGS(q, rq)
+);
+
+/**
+ * block_rq_issue - issue pending block IO request operation to device driver
+ * @q: queue holding operation
+ * @rq: block IO operation operation request
+ *
+ * Called when block operation request @rq from queue @q is sent to a
+ * device driver for processing.
+ */
+DEFINE_EVENT(block_rq, block_rq_issue,
+
+	TP_PROTO(struct request_queue *q, struct request *rq),
+
+	TP_ARGS(q, rq)
+);
+
+/**
+ * block_bio_bounce - used bounce buffer when processing block operation
+ * @q: queue holding the block operation
+ * @bio: block operation
+ *
+ * A bounce buffer was used to handle the block operation @bio in @q.
+ * This occurs when hardware limitations prevent a direct transfer of
+ * data between the @bio data memory area and the IO device.  Use of a
+ * bounce buffer requires extra copying of data and decreases
+ * performance.
+ */
+TRACE_EVENT(block_bio_bounce,
+
+	TP_PROTO(struct request_queue *q, struct bio *bio),
+
+	TP_ARGS(q, bio),
+
+	TP_STRUCT__entry(
+		__field( dev_t,		dev			)
+		__field( sector_t,	sector			)
+		__field( unsigned int,	nr_sector		)
+		__array( char,		rwbs,	RWBS_LEN	)
+		__array( char,		comm,	TASK_COMM_LEN	)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= bio->bi_bdev ?
+					  bio->bi_bdev->bd_dev : 0;
+		__entry->sector		= bio->bi_sector;
+		__entry->nr_sector	= bio->bi_size >> 9;
+		blk_fill_rwbs(__entry->rwbs, bio->bi_rw, bio->bi_size);
+		memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
+	),
+
+	TP_printk("%d,%d %s %llu + %u [%s]",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->rwbs,
+		  (unsigned long long)__entry->sector,
+		  __entry->nr_sector, __entry->comm)
+);
+
+/**
+ * block_bio_complete - completed all work on the block operation
+ * @q: queue holding the block operation
+ * @bio: block operation completed
+ * @error: io error value
+ *
+ * This tracepoint indicates there is no further work to do on this
+ * block IO operation @bio.
+ */
+TRACE_EVENT(block_bio_complete,
+
+	TP_PROTO(struct request_queue *q, struct bio *bio, int error),
+
+	TP_ARGS(q, bio, error),
+
+	TP_STRUCT__entry(
+		__field( dev_t,		dev		)
+		__field( sector_t,	sector		)
+		__field( unsigned,	nr_sector	)
+		__field( int,		error		)
+		__array( char,		rwbs,	RWBS_LEN)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= bio->bi_bdev->bd_dev;
+		__entry->sector		= bio->bi_sector;
+		__entry->nr_sector	= bio->bi_size >> 9;
+		__entry->error		= error;
+		blk_fill_rwbs(__entry->rwbs, bio->bi_rw, bio->bi_size);
+	),
+
+	TP_printk("%d,%d %s %llu + %u [%d]",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->rwbs,
+		  (unsigned long long)__entry->sector,
+		  __entry->nr_sector, __entry->error)
+);
+
+DECLARE_EVENT_CLASS(block_bio,
+
+	TP_PROTO(struct request_queue *q, struct bio *bio),
+
+	TP_ARGS(q, bio),
+
+	TP_STRUCT__entry(
+		__field( dev_t,		dev			)
+		__field( sector_t,	sector			)
+		__field( unsigned int,	nr_sector		)
+		__array( char,		rwbs,	RWBS_LEN	)
+		__array( char,		comm,	TASK_COMM_LEN	)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= bio->bi_bdev->bd_dev;
+		__entry->sector		= bio->bi_sector;
+		__entry->nr_sector	= bio->bi_size >> 9;
+		blk_fill_rwbs(__entry->rwbs, bio->bi_rw, bio->bi_size);
+		memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
+	),
+
+	TP_printk("%d,%d %s %llu + %u [%s]",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->rwbs,
+		  (unsigned long long)__entry->sector,
+		  __entry->nr_sector, __entry->comm)
+);
+
+/**
+ * block_bio_backmerge - merging block operation to the end of an existing operation
+ * @q: queue holding operation
+ * @bio: new block operation to merge
+ *
+ * Merging block request @bio to the end of an existing block request
+ * in queue @q.
+ */
+DEFINE_EVENT(block_bio, block_bio_backmerge,
+
+	TP_PROTO(struct request_queue *q, struct bio *bio),
+
+	TP_ARGS(q, bio)
+);
+
+/**
+ * block_bio_frontmerge - merging block operation to the beginning of an existing operation
+ * @q: queue holding operation
+ * @bio: new block operation to merge
+ *
+ * Merging block IO operation @bio to the beginning of an existing block
+ * operation in queue @q.
+ */
+DEFINE_EVENT(block_bio, block_bio_frontmerge,
+
+	TP_PROTO(struct request_queue *q, struct bio *bio),
+
+	TP_ARGS(q, bio)
+);
+
+/**
+ * block_bio_queue - putting new block IO operation in queue
+ * @q: queue holding operation
+ * @bio: new block operation
+ *
+ * About to place the block IO operation @bio into queue @q.
+ */
+DEFINE_EVENT(block_bio, block_bio_queue,
+
+	TP_PROTO(struct request_queue *q, struct bio *bio),
+
+	TP_ARGS(q, bio)
+);
+
+DECLARE_EVENT_CLASS(block_get_rq,
+
+	TP_PROTO(struct request_queue *q, struct bio *bio, int rw),
+
+	TP_ARGS(q, bio, rw),
+
+	TP_STRUCT__entry(
+		__field( dev_t,		dev			)
+		__field( sector_t,	sector			)
+		__field( unsigned int,	nr_sector		)
+		__array( char,		rwbs,	RWBS_LEN	)
+		__array( char,		comm,	TASK_COMM_LEN	)
+        ),
+
+	TP_fast_assign(
+		__entry->dev		= bio ? bio->bi_bdev->bd_dev : 0;
+		__entry->sector		= bio ? bio->bi_sector : 0;
+		__entry->nr_sector	= bio ? bio->bi_size >> 9 : 0;
+		blk_fill_rwbs(__entry->rwbs,
+			      bio ? bio->bi_rw : 0, __entry->nr_sector);
+		memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
+        ),
+
+	TP_printk("%d,%d %s %llu + %u [%s]",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->rwbs,
+		  (unsigned long long)__entry->sector,
+		  __entry->nr_sector, __entry->comm)
+);
+
+/**
+ * block_getrq - get a free request entry in queue for block IO operations
+ * @q: queue for operations
+ * @bio: pending block IO operation
+ * @rw: low bit indicates a read (%0) or a write (%1)
+ *
+ * A request struct for queue @q has been allocated to handle the
+ * block IO operation @bio.
+ */
+DEFINE_EVENT(block_get_rq, block_getrq,
+
+	TP_PROTO(struct request_queue *q, struct bio *bio, int rw),
+
+	TP_ARGS(q, bio, rw)
+);
+
+/**
+ * block_sleeprq - waiting to get a free request entry in queue for block IO operation
+ * @q: queue for operation
+ * @bio: pending block IO operation
+ * @rw: low bit indicates a read (%0) or a write (%1)
+ *
+ * In the case where a request struct cannot be provided for queue @q
+ * the process needs to wait for an request struct to become
+ * available.  This tracepoint event is generated each time the
+ * process goes to sleep waiting for request struct become available.
+ */
+DEFINE_EVENT(block_get_rq, block_sleeprq,
+
+	TP_PROTO(struct request_queue *q, struct bio *bio, int rw),
+
+	TP_ARGS(q, bio, rw)
+);
+
+/**
+ * block_plug - keep operations requests in request queue
+ * @q: request queue to plug
+ *
+ * Plug the request queue @q.  Do not allow block operation requests
+ * to be sent to the device driver. Instead, accumulate requests in
+ * the queue to improve throughput performance of the block device.
+ */
+TRACE_EVENT(block_plug,
+
+	TP_PROTO(struct request_queue *q),
+
+	TP_ARGS(q),
+
+	TP_STRUCT__entry(
+		__array( char,		comm,	TASK_COMM_LEN	)
+	),
+
+	TP_fast_assign(
+		memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
+	),
+
+	TP_printk("[%s]", __entry->comm)
+);
+
+DECLARE_EVENT_CLASS(block_unplug,
+
+	TP_PROTO(struct request_queue *q, unsigned int depth, bool explicit),
+
+	TP_ARGS(q, depth, explicit),
+
+	TP_STRUCT__entry(
+		__field( int,		nr_rq			)
+		__array( char,		comm,	TASK_COMM_LEN	)
+	),
+
+	TP_fast_assign(
+		__entry->nr_rq = depth;
+		memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
+	),
+
+	TP_printk("[%s] %d", __entry->comm, __entry->nr_rq)
+);
+
+/**
+ * block_unplug - release of operations requests in request queue
+ * @q: request queue to unplug
+ * @depth: number of requests just added to the queue
+ * @explicit: whether this was an explicit unplug, or one from schedule()
+ *
+ * Unplug request queue @q because device driver is scheduled to work
+ * on elements in the request queue.
+ */
+DEFINE_EVENT(block_unplug, block_unplug,
+
+	TP_PROTO(struct request_queue *q, unsigned int depth, bool explicit),
+
+	TP_ARGS(q, depth, explicit)
+);
+
+/**
+ * block_split - split a single bio struct into two bio structs
+ * @q: queue containing the bio
+ * @bio: block operation being split
+ * @new_sector: The starting sector for the new bio
+ *
+ * The bio request @bio in request queue @q needs to be split into two
+ * bio requests. The newly created @bio request starts at
+ * @new_sector. This split may be required due to hardware limitation
+ * such as operation crossing device boundaries in a RAID system.
+ */
+TRACE_EVENT(block_split,
+
+	TP_PROTO(struct request_queue *q, struct bio *bio,
+		 unsigned int new_sector),
+
+	TP_ARGS(q, bio, new_sector),
+
+	TP_STRUCT__entry(
+		__field( dev_t,		dev				)
+		__field( sector_t,	sector				)
+		__field( sector_t,	new_sector			)
+		__array( char,		rwbs,		RWBS_LEN	)
+		__array( char,		comm,		TASK_COMM_LEN	)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= bio->bi_bdev->bd_dev;
+		__entry->sector		= bio->bi_sector;
+		__entry->new_sector	= new_sector;
+		blk_fill_rwbs(__entry->rwbs, bio->bi_rw, bio->bi_size);
+		memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
+	),
+
+	TP_printk("%d,%d %s %llu / %llu [%s]",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->rwbs,
+		  (unsigned long long)__entry->sector,
+		  (unsigned long long)__entry->new_sector,
+		  __entry->comm)
+);
+
+/**
+ * block_bio_remap - map request for a logical device to the raw device
+ * @q: queue holding the operation
+ * @bio: revised operation
+ * @dev: device for the operation
+ * @from: original sector for the operation
+ *
+ * An operation for a logical device has been mapped to the
+ * raw block device.
+ */
+TRACE_EVENT(block_bio_remap,
+
+	TP_PROTO(struct request_queue *q, struct bio *bio, dev_t dev,
+		 sector_t from),
+
+	TP_ARGS(q, bio, dev, from),
+
+	TP_STRUCT__entry(
+		__field( dev_t,		dev		)
+		__field( sector_t,	sector		)
+		__field( unsigned int,	nr_sector	)
+		__field( dev_t,		old_dev		)
+		__field( sector_t,	old_sector	)
+		__array( char,		rwbs,	RWBS_LEN)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= bio->bi_bdev->bd_dev;
+		__entry->sector		= bio->bi_sector;
+		__entry->nr_sector	= bio->bi_size >> 9;
+		__entry->old_dev	= dev;
+		__entry->old_sector	= from;
+		blk_fill_rwbs(__entry->rwbs, bio->bi_rw, bio->bi_size);
+	),
+
+	TP_printk("%d,%d %s %llu + %u <- (%d,%d) %llu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->rwbs,
+		  (unsigned long long)__entry->sector,
+		  __entry->nr_sector,
+		  MAJOR(__entry->old_dev), MINOR(__entry->old_dev),
+		  (unsigned long long)__entry->old_sector)
+);
+
+/**
+ * block_rq_remap - map request for a block operation request
+ * @q: queue holding the operation
+ * @rq: block IO operation request
+ * @dev: device for the operation
+ * @from: original sector for the operation
+ *
+ * The block operation request @rq in @q has been remapped.  The block
+ * operation request @rq holds the current information and @from hold
+ * the original sector.
+ */
+TRACE_EVENT(block_rq_remap,
+
+	TP_PROTO(struct request_queue *q, struct request *rq, dev_t dev,
+		 sector_t from),
+
+	TP_ARGS(q, rq, dev, from),
+
+	TP_STRUCT__entry(
+		__field( dev_t,		dev		)
+		__field( sector_t,	sector		)
+		__field( unsigned int,	nr_sector	)
+		__field( dev_t,		old_dev		)
+		__field( sector_t,	old_sector	)
+		__array( char,		rwbs,	RWBS_LEN)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= disk_devt(rq->rq_disk);
+		__entry->sector		= blk_rq_pos(rq);
+		__entry->nr_sector	= blk_rq_sectors(rq);
+		__entry->old_dev	= dev;
+		__entry->old_sector	= from;
+		blk_fill_rwbs(__entry->rwbs, rq->cmd_flags, blk_rq_bytes(rq));
+	),
+
+	TP_printk("%d,%d %s %llu + %u <- (%d,%d) %llu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->rwbs,
+		  (unsigned long long)__entry->sector,
+		  __entry->nr_sector,
+		  MAJOR(__entry->old_dev), MINOR(__entry->old_dev),
+		  (unsigned long long)__entry->old_sector)
+);
+
+#endif /* _TRACE_BLOCK_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
+
diff --git a/include/trace/events/btrfs.h b/include/trace/events/btrfs.h
new file mode 100644
index 00000000..91b91e80
--- /dev/null
+++ b/include/trace/events/btrfs.h
@@ -0,0 +1,912 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM btrfs
+
+#if !defined(_TRACE_BTRFS_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_BTRFS_H
+
+#include <linux/writeback.h>
+#include <linux/tracepoint.h>
+#include <trace/events/gfpflags.h>
+
+struct btrfs_root;
+struct btrfs_fs_info;
+struct btrfs_inode;
+struct extent_map;
+struct btrfs_ordered_extent;
+struct btrfs_delayed_ref_node;
+struct btrfs_delayed_tree_ref;
+struct btrfs_delayed_data_ref;
+struct btrfs_delayed_ref_head;
+struct btrfs_block_group_cache;
+struct btrfs_free_cluster;
+struct map_lookup;
+struct extent_buffer;
+
+#define show_ref_type(type)						\
+	__print_symbolic(type,						\
+		{ BTRFS_TREE_BLOCK_REF_KEY, 	"TREE_BLOCK_REF" },	\
+		{ BTRFS_EXTENT_DATA_REF_KEY, 	"EXTENT_DATA_REF" },	\
+		{ BTRFS_EXTENT_REF_V0_KEY, 	"EXTENT_REF_V0" },	\
+		{ BTRFS_SHARED_BLOCK_REF_KEY, 	"SHARED_BLOCK_REF" },	\
+		{ BTRFS_SHARED_DATA_REF_KEY, 	"SHARED_DATA_REF" })
+
+#define __show_root_type(obj)						\
+	__print_symbolic_u64(obj,					\
+		{ BTRFS_ROOT_TREE_OBJECTID, 	"ROOT_TREE"	},	\
+		{ BTRFS_EXTENT_TREE_OBJECTID, 	"EXTENT_TREE"	},	\
+		{ BTRFS_CHUNK_TREE_OBJECTID, 	"CHUNK_TREE"	},	\
+		{ BTRFS_DEV_TREE_OBJECTID, 	"DEV_TREE"	},	\
+		{ BTRFS_FS_TREE_OBJECTID, 	"FS_TREE"	},	\
+		{ BTRFS_ROOT_TREE_DIR_OBJECTID, "ROOT_TREE_DIR"	},	\
+		{ BTRFS_CSUM_TREE_OBJECTID, 	"CSUM_TREE"	},	\
+		{ BTRFS_TREE_LOG_OBJECTID,	"TREE_LOG"	},	\
+		{ BTRFS_TREE_RELOC_OBJECTID,	"TREE_RELOC"	},	\
+		{ BTRFS_DATA_RELOC_TREE_OBJECTID, "DATA_RELOC_TREE" })
+
+#define show_root_type(obj)						\
+	obj, ((obj >= BTRFS_DATA_RELOC_TREE_OBJECTID) ||		\
+	      (obj <= BTRFS_CSUM_TREE_OBJECTID )) ? __show_root_type(obj) : "-"
+
+#define BTRFS_GROUP_FLAGS	\
+	{ BTRFS_BLOCK_GROUP_DATA,	"DATA"}, \
+	{ BTRFS_BLOCK_GROUP_SYSTEM,	"SYSTEM"}, \
+	{ BTRFS_BLOCK_GROUP_METADATA,	"METADATA"}, \
+	{ BTRFS_BLOCK_GROUP_RAID0,	"RAID0"}, \
+	{ BTRFS_BLOCK_GROUP_RAID1,	"RAID1"}, \
+	{ BTRFS_BLOCK_GROUP_DUP,	"DUP"}, \
+	{ BTRFS_BLOCK_GROUP_RAID10,	"RAID10"}
+
+#define BTRFS_UUID_SIZE 16
+
+TRACE_EVENT(btrfs_transaction_commit,
+
+	TP_PROTO(struct btrfs_root *root),
+
+	TP_ARGS(root),
+
+	TP_STRUCT__entry(
+		__field(	u64,  generation		)
+		__field(	u64,  root_objectid		)
+	),
+
+	TP_fast_assign(
+		__entry->generation	= root->fs_info->generation;
+		__entry->root_objectid	= root->root_key.objectid;
+	),
+
+	TP_printk("root = %llu(%s), gen = %llu",
+		  show_root_type(__entry->root_objectid),
+		  (unsigned long long)__entry->generation)
+);
+
+DECLARE_EVENT_CLASS(btrfs__inode,
+
+	TP_PROTO(struct inode *inode),
+
+	TP_ARGS(inode),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,  ino			)
+		__field(	blkcnt_t,  blocks		)
+		__field(	u64,  disk_i_size		)
+		__field(	u64,  generation		)
+		__field(	u64,  last_trans		)
+		__field(	u64,  logged_trans		)
+		__field(	u64,  root_objectid		)
+	),
+
+	TP_fast_assign(
+		__entry->ino	= inode->i_ino;
+		__entry->blocks	= inode->i_blocks;
+		__entry->disk_i_size  = BTRFS_I(inode)->disk_i_size;
+		__entry->generation = BTRFS_I(inode)->generation;
+		__entry->last_trans = BTRFS_I(inode)->last_trans;
+		__entry->logged_trans = BTRFS_I(inode)->logged_trans;
+		__entry->root_objectid =
+				BTRFS_I(inode)->root->root_key.objectid;
+	),
+
+	TP_printk("root = %llu(%s), gen = %llu, ino = %lu, blocks = %llu, "
+		  "disk_i_size = %llu, last_trans = %llu, logged_trans = %llu",
+		  show_root_type(__entry->root_objectid),
+		  (unsigned long long)__entry->generation,
+		  (unsigned long)__entry->ino,
+		  (unsigned long long)__entry->blocks,
+		  (unsigned long long)__entry->disk_i_size,
+		  (unsigned long long)__entry->last_trans,
+		  (unsigned long long)__entry->logged_trans)
+);
+
+DEFINE_EVENT(btrfs__inode, btrfs_inode_new,
+
+	TP_PROTO(struct inode *inode),
+
+	TP_ARGS(inode)
+);
+
+DEFINE_EVENT(btrfs__inode, btrfs_inode_request,
+
+	TP_PROTO(struct inode *inode),
+
+	TP_ARGS(inode)
+);
+
+DEFINE_EVENT(btrfs__inode, btrfs_inode_evict,
+
+	TP_PROTO(struct inode *inode),
+
+	TP_ARGS(inode)
+);
+
+#define __show_map_type(type)						\
+	__print_symbolic_u64(type,					\
+		{ EXTENT_MAP_LAST_BYTE, "LAST_BYTE" 	},		\
+		{ EXTENT_MAP_HOLE, 	"HOLE" 		},		\
+		{ EXTENT_MAP_INLINE, 	"INLINE" 	},		\
+		{ EXTENT_MAP_DELALLOC,	"DELALLOC" 	})
+
+#define show_map_type(type)			\
+	type, (type >= EXTENT_MAP_LAST_BYTE) ? "-" :  __show_map_type(type)
+
+#define show_map_flags(flag)						\
+	__print_flags(flag, "|",					\
+		{ EXTENT_FLAG_PINNED, 		"PINNED" 	},	\
+		{ EXTENT_FLAG_COMPRESSED, 	"COMPRESSED" 	},	\
+		{ EXTENT_FLAG_VACANCY, 		"VACANCY" 	},	\
+		{ EXTENT_FLAG_PREALLOC, 	"PREALLOC" 	})
+
+TRACE_EVENT(btrfs_get_extent,
+
+	TP_PROTO(struct btrfs_root *root, struct extent_map *map),
+
+	TP_ARGS(root, map),
+
+	TP_STRUCT__entry(
+		__field(	u64,  root_objectid	)
+		__field(	u64,  start		)
+		__field(	u64,  len		)
+		__field(	u64,  orig_start	)
+		__field(	u64,  block_start	)
+		__field(	u64,  block_len		)
+		__field(	unsigned long,  flags	)
+		__field(	int,  refs		)
+		__field(	unsigned int,  compress_type	)
+	),
+
+	TP_fast_assign(
+		__entry->root_objectid	= root->root_key.objectid;
+		__entry->start 		= map->start;
+		__entry->len		= map->len;
+		__entry->orig_start	= map->orig_start;
+		__entry->block_start	= map->block_start;
+		__entry->block_len	= map->block_len;
+		__entry->flags		= map->flags;
+		__entry->refs		= atomic_read(&map->refs);
+		__entry->compress_type	= map->compress_type;
+	),
+
+	TP_printk("root = %llu(%s), start = %llu, len = %llu, "
+		  "orig_start = %llu, block_start = %llu(%s), "
+		  "block_len = %llu, flags = %s, refs = %u, "
+		  "compress_type = %u",
+		  show_root_type(__entry->root_objectid),
+		  (unsigned long long)__entry->start,
+		  (unsigned long long)__entry->len,
+		  (unsigned long long)__entry->orig_start,
+		  show_map_type(__entry->block_start),
+		  (unsigned long long)__entry->block_len,
+		  show_map_flags(__entry->flags),
+		  __entry->refs, __entry->compress_type)
+);
+
+#define show_ordered_flags(flags)					\
+	__print_symbolic(flags,					\
+		{ BTRFS_ORDERED_IO_DONE, 	"IO_DONE" 	},	\
+		{ BTRFS_ORDERED_COMPLETE, 	"COMPLETE" 	},	\
+		{ BTRFS_ORDERED_NOCOW, 		"NOCOW" 	},	\
+		{ BTRFS_ORDERED_COMPRESSED, 	"COMPRESSED" 	},	\
+		{ BTRFS_ORDERED_PREALLOC, 	"PREALLOC" 	},	\
+		{ BTRFS_ORDERED_DIRECT, 	"DIRECT" 	})
+
+DECLARE_EVENT_CLASS(btrfs__ordered_extent,
+
+	TP_PROTO(struct inode *inode, struct btrfs_ordered_extent *ordered),
+
+	TP_ARGS(inode, ordered),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,  ino		)
+		__field(	u64,  file_offset	)
+		__field(	u64,  start		)
+		__field(	u64,  len		)
+		__field(	u64,  disk_len		)
+		__field(	u64,  bytes_left	)
+		__field(	unsigned long,  flags	)
+		__field(	int,  compress_type	)
+		__field(	int,  refs		)
+		__field(	u64,  root_objectid	)
+	),
+
+	TP_fast_assign(
+		__entry->ino 		= inode->i_ino;
+		__entry->file_offset	= ordered->file_offset;
+		__entry->start		= ordered->start;
+		__entry->len		= ordered->len;
+		__entry->disk_len	= ordered->disk_len;
+		__entry->bytes_left	= ordered->bytes_left;
+		__entry->flags		= ordered->flags;
+		__entry->compress_type	= ordered->compress_type;
+		__entry->refs		= atomic_read(&ordered->refs);
+		__entry->root_objectid	=
+				BTRFS_I(inode)->root->root_key.objectid;
+	),
+
+	TP_printk("root = %llu(%s), ino = %llu, file_offset = %llu, "
+		  "start = %llu, len = %llu, disk_len = %llu, "
+		  "bytes_left = %llu, flags = %s, compress_type = %d, "
+		  "refs = %d",
+		  show_root_type(__entry->root_objectid),
+		  (unsigned long long)__entry->ino,
+		  (unsigned long long)__entry->file_offset,
+		  (unsigned long long)__entry->start,
+		  (unsigned long long)__entry->len,
+		  (unsigned long long)__entry->disk_len,
+		  (unsigned long long)__entry->bytes_left,
+		  show_ordered_flags(__entry->flags),
+		  __entry->compress_type, __entry->refs)
+);
+
+DEFINE_EVENT(btrfs__ordered_extent, btrfs_ordered_extent_add,
+
+	TP_PROTO(struct inode *inode, struct btrfs_ordered_extent *ordered),
+
+	TP_ARGS(inode, ordered)
+);
+
+DEFINE_EVENT(btrfs__ordered_extent, btrfs_ordered_extent_remove,
+
+	TP_PROTO(struct inode *inode, struct btrfs_ordered_extent *ordered),
+
+	TP_ARGS(inode, ordered)
+);
+
+DEFINE_EVENT(btrfs__ordered_extent, btrfs_ordered_extent_start,
+
+	TP_PROTO(struct inode *inode, struct btrfs_ordered_extent *ordered),
+
+	TP_ARGS(inode, ordered)
+);
+
+DEFINE_EVENT(btrfs__ordered_extent, btrfs_ordered_extent_put,
+
+	TP_PROTO(struct inode *inode, struct btrfs_ordered_extent *ordered),
+
+	TP_ARGS(inode, ordered)
+);
+
+DECLARE_EVENT_CLASS(btrfs__writepage,
+
+	TP_PROTO(struct page *page, struct inode *inode,
+		 struct writeback_control *wbc),
+
+	TP_ARGS(page, inode, wbc),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,  ino			)
+		__field(	pgoff_t,  index			)
+		__field(	long,   nr_to_write		)
+		__field(	long,   pages_skipped		)
+		__field(	loff_t, range_start		)
+		__field(	loff_t, range_end		)
+		__field(	char,   for_kupdate		)
+		__field(	char,   for_reclaim		)
+		__field(	char,   range_cyclic		)
+		__field(	pgoff_t,  writeback_index	)
+		__field(	u64,    root_objectid		)
+	),
+
+	TP_fast_assign(
+		__entry->ino		= inode->i_ino;
+		__entry->index		= page->index;
+		__entry->nr_to_write	= wbc->nr_to_write;
+		__entry->pages_skipped	= wbc->pages_skipped;
+		__entry->range_start	= wbc->range_start;
+		__entry->range_end	= wbc->range_end;
+		__entry->for_kupdate	= wbc->for_kupdate;
+		__entry->for_reclaim	= wbc->for_reclaim;
+		__entry->range_cyclic	= wbc->range_cyclic;
+		__entry->writeback_index = inode->i_mapping->writeback_index;
+		__entry->root_objectid	=
+				 BTRFS_I(inode)->root->root_key.objectid;
+	),
+
+	TP_printk("root = %llu(%s), ino = %lu, page_index = %lu, "
+		  "nr_to_write = %ld, pages_skipped = %ld, range_start = %llu, "
+		  "range_end = %llu, for_kupdate = %d, "
+		  "for_reclaim = %d, range_cyclic = %d, writeback_index = %lu",
+		  show_root_type(__entry->root_objectid),
+		  (unsigned long)__entry->ino, __entry->index,
+		  __entry->nr_to_write, __entry->pages_skipped,
+		  __entry->range_start, __entry->range_end,
+		  __entry->for_kupdate,
+		  __entry->for_reclaim, __entry->range_cyclic,
+		  (unsigned long)__entry->writeback_index)
+);
+
+DEFINE_EVENT(btrfs__writepage, __extent_writepage,
+
+	TP_PROTO(struct page *page, struct inode *inode,
+		 struct writeback_control *wbc),
+
+	TP_ARGS(page, inode, wbc)
+);
+
+TRACE_EVENT(btrfs_writepage_end_io_hook,
+
+	TP_PROTO(struct page *page, u64 start, u64 end, int uptodate),
+
+	TP_ARGS(page, start, end, uptodate),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,	 ino		)
+		__field(	pgoff_t, index		)
+		__field(	u64,	 start		)
+		__field(	u64,	 end		)
+		__field(	int,	 uptodate	)
+		__field(	u64,    root_objectid	)
+	),
+
+	TP_fast_assign(
+		__entry->ino	= page->mapping->host->i_ino;
+		__entry->index	= page->index;
+		__entry->start	= start;
+		__entry->end	= end;
+		__entry->uptodate = uptodate;
+		__entry->root_objectid	=
+			 BTRFS_I(page->mapping->host)->root->root_key.objectid;
+	),
+
+	TP_printk("root = %llu(%s), ino = %lu, page_index = %lu, start = %llu, "
+		  "end = %llu, uptodate = %d",
+		  show_root_type(__entry->root_objectid),
+		  (unsigned long)__entry->ino, (unsigned long)__entry->index,
+		  (unsigned long long)__entry->start,
+		  (unsigned long long)__entry->end, __entry->uptodate)
+);
+
+TRACE_EVENT(btrfs_sync_file,
+
+	TP_PROTO(struct file *file, int datasync),
+
+	TP_ARGS(file, datasync),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,  ino		)
+		__field(	ino_t,  parent		)
+		__field(	int,    datasync	)
+		__field(	u64,    root_objectid	)
+	),
+
+	TP_fast_assign(
+		struct dentry *dentry = file->f_path.dentry;
+		struct inode *inode = dentry->d_inode;
+
+		__entry->ino		= inode->i_ino;
+		__entry->parent		= dentry->d_parent->d_inode->i_ino;
+		__entry->datasync	= datasync;
+		__entry->root_objectid	=
+				 BTRFS_I(inode)->root->root_key.objectid;
+	),
+
+	TP_printk("root = %llu(%s), ino = %ld, parent = %ld, datasync = %d",
+		  show_root_type(__entry->root_objectid),
+		  (unsigned long)__entry->ino, (unsigned long)__entry->parent,
+		  __entry->datasync)
+);
+
+TRACE_EVENT(btrfs_sync_fs,
+
+	TP_PROTO(int wait),
+
+	TP_ARGS(wait),
+
+	TP_STRUCT__entry(
+		__field(	int,  wait		)
+	),
+
+	TP_fast_assign(
+		__entry->wait	= wait;
+	),
+
+	TP_printk("wait = %d", __entry->wait)
+);
+
+#define show_ref_action(action)						\
+	__print_symbolic(action,					\
+		{ BTRFS_ADD_DELAYED_REF,    "ADD_DELAYED_REF" },	\
+		{ BTRFS_DROP_DELAYED_REF,   "DROP_DELAYED_REF" },	\
+		{ BTRFS_ADD_DELAYED_EXTENT, "ADD_DELAYED_EXTENT" }, 	\
+		{ BTRFS_UPDATE_DELAYED_HEAD, "UPDATE_DELAYED_HEAD" })
+			
+
+TRACE_EVENT(btrfs_delayed_tree_ref,
+
+	TP_PROTO(struct btrfs_delayed_ref_node *ref,
+		 struct btrfs_delayed_tree_ref *full_ref,
+		 int action),
+
+	TP_ARGS(ref, full_ref, action),
+
+	TP_STRUCT__entry(
+		__field(	u64,  bytenr		)
+		__field(	u64,  num_bytes		)
+		__field(	int,  action		) 
+		__field(	u64,  parent		)
+		__field(	u64,  ref_root		)
+		__field(	int,  level		)
+		__field(	int,  type		)
+	),
+
+	TP_fast_assign(
+		__entry->bytenr		= ref->bytenr;
+		__entry->num_bytes	= ref->num_bytes;
+		__entry->action		= action;
+		__entry->parent		= full_ref->parent;
+		__entry->ref_root	= full_ref->root;
+		__entry->level		= full_ref->level;
+		__entry->type		= ref->type;
+	),
+
+	TP_printk("bytenr = %llu, num_bytes = %llu, action = %s, "
+		  "parent = %llu(%s), ref_root = %llu(%s), level = %d, "
+		  "type = %s",
+		  (unsigned long long)__entry->bytenr,
+		  (unsigned long long)__entry->num_bytes,
+		  show_ref_action(__entry->action),
+		  show_root_type(__entry->parent),
+		  show_root_type(__entry->ref_root),
+		  __entry->level, show_ref_type(__entry->type))
+);
+
+TRACE_EVENT(btrfs_delayed_data_ref,
+
+	TP_PROTO(struct btrfs_delayed_ref_node *ref,
+		 struct btrfs_delayed_data_ref *full_ref,
+		 int action),
+
+	TP_ARGS(ref, full_ref, action),
+
+	TP_STRUCT__entry(
+		__field(	u64,  bytenr		)
+		__field(	u64,  num_bytes		)
+		__field(	int,  action		) 
+		__field(	u64,  parent		)
+		__field(	u64,  ref_root		)
+		__field(	u64,  owner		)
+		__field(	u64,  offset		)
+		__field(	int,  type		)
+	),
+
+	TP_fast_assign(
+		__entry->bytenr		= ref->bytenr;
+		__entry->num_bytes	= ref->num_bytes;
+		__entry->action		= action;
+		__entry->parent		= full_ref->parent;
+		__entry->ref_root	= full_ref->root;
+		__entry->owner		= full_ref->objectid;
+		__entry->offset		= full_ref->offset;
+		__entry->type		= ref->type;
+	),
+
+	TP_printk("bytenr = %llu, num_bytes = %llu, action = %s, "
+		  "parent = %llu(%s), ref_root = %llu(%s), owner = %llu, "
+		  "offset = %llu, type = %s",
+		  (unsigned long long)__entry->bytenr,
+		  (unsigned long long)__entry->num_bytes,
+		  show_ref_action(__entry->action),
+		  show_root_type(__entry->parent),
+		  show_root_type(__entry->ref_root),
+		  (unsigned long long)__entry->owner,
+		  (unsigned long long)__entry->offset,
+		  show_ref_type(__entry->type))
+);
+
+TRACE_EVENT(btrfs_delayed_ref_head,
+
+	TP_PROTO(struct btrfs_delayed_ref_node *ref,
+		 struct btrfs_delayed_ref_head *head_ref,
+		 int action),
+
+	TP_ARGS(ref, head_ref, action),
+
+	TP_STRUCT__entry(
+		__field(	u64,  bytenr		)
+		__field(	u64,  num_bytes		)
+		__field(	int,  action		) 
+		__field(	int,  is_data		)
+	),
+
+	TP_fast_assign(
+		__entry->bytenr		= ref->bytenr;
+		__entry->num_bytes	= ref->num_bytes;
+		__entry->action		= action;
+		__entry->is_data	= head_ref->is_data;
+	),
+
+	TP_printk("bytenr = %llu, num_bytes = %llu, action = %s, is_data = %d",
+		  (unsigned long long)__entry->bytenr,
+		  (unsigned long long)__entry->num_bytes,
+		  show_ref_action(__entry->action),
+		  __entry->is_data)
+);
+
+#define show_chunk_type(type)					\
+	__print_flags(type, "|",				\
+		{ BTRFS_BLOCK_GROUP_DATA, 	"DATA"	},	\
+		{ BTRFS_BLOCK_GROUP_SYSTEM, 	"SYSTEM"},	\
+		{ BTRFS_BLOCK_GROUP_METADATA, 	"METADATA"},	\
+		{ BTRFS_BLOCK_GROUP_RAID0, 	"RAID0" },	\
+		{ BTRFS_BLOCK_GROUP_RAID1, 	"RAID1" },	\
+		{ BTRFS_BLOCK_GROUP_DUP, 	"DUP"	},	\
+		{ BTRFS_BLOCK_GROUP_RAID10, 	"RAID10"})
+
+DECLARE_EVENT_CLASS(btrfs__chunk,
+
+	TP_PROTO(struct btrfs_root *root, struct map_lookup *map,
+		 u64 offset, u64 size),
+
+	TP_ARGS(root, map, offset, size),
+
+	TP_STRUCT__entry(
+		__field(	int,  num_stripes		)
+		__field(	u64,  type			)
+		__field(	int,  sub_stripes		)
+		__field(	u64,  offset			)
+		__field(	u64,  size			)
+		__field(	u64,  root_objectid		)
+	),
+
+	TP_fast_assign(
+		__entry->num_stripes	= map->num_stripes;
+		__entry->type		= map->type;
+		__entry->sub_stripes	= map->sub_stripes;
+		__entry->offset		= offset;
+		__entry->size		= size;
+		__entry->root_objectid	= root->root_key.objectid;
+	),
+
+	TP_printk("root = %llu(%s), offset = %llu, size = %llu, "
+		  "num_stripes = %d, sub_stripes = %d, type = %s",
+		  show_root_type(__entry->root_objectid),
+		  (unsigned long long)__entry->offset,
+		  (unsigned long long)__entry->size,
+		  __entry->num_stripes, __entry->sub_stripes,
+		  show_chunk_type(__entry->type))
+);
+
+DEFINE_EVENT(btrfs__chunk,  btrfs_chunk_alloc,
+
+	TP_PROTO(struct btrfs_root *root, struct map_lookup *map,
+		 u64 offset, u64 size),
+
+	TP_ARGS(root, map, offset, size)
+);
+
+DEFINE_EVENT(btrfs__chunk,  btrfs_chunk_free,
+
+	TP_PROTO(struct btrfs_root *root, struct map_lookup *map,
+		 u64 offset, u64 size),
+
+	TP_ARGS(root, map, offset, size)
+);
+
+TRACE_EVENT(btrfs_cow_block,
+
+	TP_PROTO(struct btrfs_root *root, struct extent_buffer *buf,
+		 struct extent_buffer *cow),
+
+	TP_ARGS(root, buf, cow),
+
+	TP_STRUCT__entry(
+		__field(	u64,  root_objectid		)
+		__field(	u64,  buf_start			)
+		__field(	int,  refs			)
+		__field(	u64,  cow_start			)
+		__field(	int,  buf_level			)
+		__field(	int,  cow_level			)
+	),
+
+	TP_fast_assign(
+		__entry->root_objectid	= root->root_key.objectid;
+		__entry->buf_start	= buf->start;
+		__entry->refs		= atomic_read(&buf->refs);
+		__entry->cow_start	= cow->start;
+		__entry->buf_level	= btrfs_header_level(buf);
+		__entry->cow_level	= btrfs_header_level(cow);
+	),
+
+	TP_printk("root = %llu(%s), refs = %d, orig_buf = %llu "
+		  "(orig_level = %d), cow_buf = %llu (cow_level = %d)",
+		  show_root_type(__entry->root_objectid),
+		  __entry->refs,
+		  (unsigned long long)__entry->buf_start,
+		  __entry->buf_level,
+		  (unsigned long long)__entry->cow_start,
+		  __entry->cow_level)
+);
+
+TRACE_EVENT(btrfs_space_reservation,
+
+	TP_PROTO(struct btrfs_fs_info *fs_info, char *type, u64 val,
+		 u64 bytes, int reserve),
+
+	TP_ARGS(fs_info, type, val, bytes, reserve),
+
+	TP_STRUCT__entry(
+		__array(	u8,	fsid,	BTRFS_UUID_SIZE	)
+		__string(	type,	type			)
+		__field(	u64,	val			)
+		__field(	u64,	bytes			)
+		__field(	int,	reserve			)
+	),
+
+	TP_fast_assign(
+		memcpy(__entry->fsid, fs_info->fsid, BTRFS_UUID_SIZE);
+		__assign_str(type, type);
+		__entry->val		= val;
+		__entry->bytes		= bytes;
+		__entry->reserve	= reserve;
+	),
+
+	TP_printk("%pU: %s: %Lu %s %Lu", __entry->fsid, __get_str(type),
+		  __entry->val, __entry->reserve ? "reserve" : "release",
+		  __entry->bytes)
+);
+
+DECLARE_EVENT_CLASS(btrfs__reserved_extent,
+
+	TP_PROTO(struct btrfs_root *root, u64 start, u64 len),
+
+	TP_ARGS(root, start, len),
+
+	TP_STRUCT__entry(
+		__field(	u64,  root_objectid		)
+		__field(	u64,  start			)
+		__field(	u64,  len			)
+	),
+
+	TP_fast_assign(
+		__entry->root_objectid	= root->root_key.objectid;
+		__entry->start		= start;
+		__entry->len		= len;
+	),
+
+	TP_printk("root = %llu(%s), start = %llu, len = %llu",
+		  show_root_type(__entry->root_objectid),
+		  (unsigned long long)__entry->start,
+		  (unsigned long long)__entry->len)
+);
+
+DEFINE_EVENT(btrfs__reserved_extent,  btrfs_reserved_extent_alloc,
+
+	TP_PROTO(struct btrfs_root *root, u64 start, u64 len),
+
+	TP_ARGS(root, start, len)
+);
+
+DEFINE_EVENT(btrfs__reserved_extent,  btrfs_reserved_extent_free,
+
+	TP_PROTO(struct btrfs_root *root, u64 start, u64 len),
+
+	TP_ARGS(root, start, len)
+);
+
+TRACE_EVENT(find_free_extent,
+
+	TP_PROTO(struct btrfs_root *root, u64 num_bytes, u64 empty_size,
+		 u64 data),
+
+	TP_ARGS(root, num_bytes, empty_size, data),
+
+	TP_STRUCT__entry(
+		__field(	u64,	root_objectid		)
+		__field(	u64,	num_bytes		)
+		__field(	u64,	empty_size		)
+		__field(	u64,	data			)
+	),
+
+	TP_fast_assign(
+		__entry->root_objectid	= root->root_key.objectid;
+		__entry->num_bytes	= num_bytes;
+		__entry->empty_size	= empty_size;
+		__entry->data		= data;
+	),
+
+	TP_printk("root = %Lu(%s), len = %Lu, empty_size = %Lu, "
+		  "flags = %Lu(%s)", show_root_type(__entry->root_objectid),
+		  __entry->num_bytes, __entry->empty_size, __entry->data,
+		  __print_flags((unsigned long)__entry->data, "|",
+				 BTRFS_GROUP_FLAGS))
+);
+
+DECLARE_EVENT_CLASS(btrfs__reserve_extent,
+
+	TP_PROTO(struct btrfs_root *root,
+		 struct btrfs_block_group_cache *block_group, u64 start,
+		 u64 len),
+
+	TP_ARGS(root, block_group, start, len),
+
+	TP_STRUCT__entry(
+		__field(	u64,	root_objectid		)
+		__field(	u64,	bg_objectid		)
+		__field(	u64,	flags			)
+		__field(	u64,	start			)
+		__field(	u64,	len			)
+	),
+
+	TP_fast_assign(
+		__entry->root_objectid	= root->root_key.objectid;
+		__entry->bg_objectid	= block_group->key.objectid;
+		__entry->flags		= block_group->flags;
+		__entry->start		= start;
+		__entry->len		= len;
+	),
+
+	TP_printk("root = %Lu(%s), block_group = %Lu, flags = %Lu(%s), "
+		  "start = %Lu, len = %Lu",
+		  show_root_type(__entry->root_objectid), __entry->bg_objectid,
+		  __entry->flags, __print_flags((unsigned long)__entry->flags,
+						"|", BTRFS_GROUP_FLAGS),
+		  __entry->start, __entry->len)
+);
+
+DEFINE_EVENT(btrfs__reserve_extent, btrfs_reserve_extent,
+
+	TP_PROTO(struct btrfs_root *root,
+		 struct btrfs_block_group_cache *block_group, u64 start,
+		 u64 len),
+
+	TP_ARGS(root, block_group, start, len)
+);
+
+DEFINE_EVENT(btrfs__reserve_extent, btrfs_reserve_extent_cluster,
+
+	TP_PROTO(struct btrfs_root *root,
+		 struct btrfs_block_group_cache *block_group, u64 start,
+		 u64 len),
+
+	TP_ARGS(root, block_group, start, len)
+);
+
+TRACE_EVENT(btrfs_find_cluster,
+
+	TP_PROTO(struct btrfs_block_group_cache *block_group, u64 start,
+		 u64 bytes, u64 empty_size, u64 min_bytes),
+
+	TP_ARGS(block_group, start, bytes, empty_size, min_bytes),
+
+	TP_STRUCT__entry(
+		__field(	u64,	bg_objectid		)
+		__field(	u64,	flags			)
+		__field(	u64,	start			)
+		__field(	u64,	bytes			)
+		__field(	u64,	empty_size		)
+		__field(	u64,	min_bytes		)
+	),
+
+	TP_fast_assign(
+		__entry->bg_objectid	= block_group->key.objectid;
+		__entry->flags		= block_group->flags;
+		__entry->start		= start;
+		__entry->bytes		= bytes;
+		__entry->empty_size	= empty_size;
+		__entry->min_bytes	= min_bytes;
+	),
+
+	TP_printk("block_group = %Lu, flags = %Lu(%s), start = %Lu, len = %Lu,"
+		  " empty_size = %Lu, min_bytes = %Lu", __entry->bg_objectid,
+		  __entry->flags,
+		  __print_flags((unsigned long)__entry->flags, "|",
+				BTRFS_GROUP_FLAGS), __entry->start,
+		  __entry->bytes, __entry->empty_size,  __entry->min_bytes)
+);
+
+TRACE_EVENT(btrfs_failed_cluster_setup,
+
+	TP_PROTO(struct btrfs_block_group_cache *block_group),
+
+	TP_ARGS(block_group),
+
+	TP_STRUCT__entry(
+		__field(	u64,	bg_objectid		)
+	),
+
+	TP_fast_assign(
+		__entry->bg_objectid	= block_group->key.objectid;
+	),
+
+	TP_printk("block_group = %Lu", __entry->bg_objectid)
+);
+
+TRACE_EVENT(btrfs_setup_cluster,
+
+	TP_PROTO(struct btrfs_block_group_cache *block_group,
+		 struct btrfs_free_cluster *cluster, u64 size, int bitmap),
+
+	TP_ARGS(block_group, cluster, size, bitmap),
+
+	TP_STRUCT__entry(
+		__field(	u64,	bg_objectid		)
+		__field(	u64,	flags			)
+		__field(	u64,	start			)
+		__field(	u64,	max_size		)
+		__field(	u64,	size			)
+		__field(	int,	bitmap			)
+	),
+
+	TP_fast_assign(
+		__entry->bg_objectid	= block_group->key.objectid;
+		__entry->flags		= block_group->flags;
+		__entry->start		= cluster->window_start;
+		__entry->max_size	= cluster->max_size;
+		__entry->size		= size;
+		__entry->bitmap		= bitmap;
+	),
+
+	TP_printk("block_group = %Lu, flags = %Lu(%s), window_start = %Lu, "
+		  "size = %Lu, max_size = %Lu, bitmap = %d",
+		  __entry->bg_objectid,
+		  __entry->flags,
+		  __print_flags((unsigned long)__entry->flags, "|",
+				BTRFS_GROUP_FLAGS), __entry->start,
+		  __entry->size, __entry->max_size, __entry->bitmap)
+);
+
+struct extent_state;
+TRACE_EVENT(alloc_extent_state,
+
+	TP_PROTO(struct extent_state *state, gfp_t mask, unsigned long IP),
+
+	TP_ARGS(state, mask, IP),
+
+	TP_STRUCT__entry(
+		__field(struct extent_state *, state)
+		__field(gfp_t, mask)
+		__field(unsigned long, ip)
+	),
+
+	TP_fast_assign(
+		__entry->state	= state,
+		__entry->mask	= mask,
+		__entry->ip	= IP
+	),
+
+	TP_printk("state=%p; mask = %s; caller = %pF", __entry->state,
+		  show_gfp_flags(__entry->mask), (void *)__entry->ip)
+);
+
+TRACE_EVENT(free_extent_state,
+
+	TP_PROTO(struct extent_state *state, unsigned long IP),
+
+	TP_ARGS(state, IP),
+
+	TP_STRUCT__entry(
+		__field(struct extent_state *, state)
+		__field(unsigned long, ip)
+	),
+
+	TP_fast_assign(
+		__entry->state	= state,
+		__entry->ip = IP
+	),
+
+	TP_printk(" state=%p; caller = %pF", __entry->state,
+		  (void *)__entry->ip)
+);
+
+#endif /* _TRACE_BTRFS_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/compaction.h b/include/trace/events/compaction.h
new file mode 100644
index 00000000..388bcdd2
--- /dev/null
+++ b/include/trace/events/compaction.h
@@ -0,0 +1,74 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM compaction
+
+#if !defined(_TRACE_COMPACTION_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_COMPACTION_H
+
+#include <linux/types.h>
+#include <linux/tracepoint.h>
+#include "gfpflags.h"
+
+DECLARE_EVENT_CLASS(mm_compaction_isolate_template,
+
+	TP_PROTO(unsigned long nr_scanned,
+		unsigned long nr_taken),
+
+	TP_ARGS(nr_scanned, nr_taken),
+
+	TP_STRUCT__entry(
+		__field(unsigned long, nr_scanned)
+		__field(unsigned long, nr_taken)
+	),
+
+	TP_fast_assign(
+		__entry->nr_scanned = nr_scanned;
+		__entry->nr_taken = nr_taken;
+	),
+
+	TP_printk("nr_scanned=%lu nr_taken=%lu",
+		__entry->nr_scanned,
+		__entry->nr_taken)
+);
+
+DEFINE_EVENT(mm_compaction_isolate_template, mm_compaction_isolate_migratepages,
+
+	TP_PROTO(unsigned long nr_scanned,
+		unsigned long nr_taken),
+
+	TP_ARGS(nr_scanned, nr_taken)
+);
+
+DEFINE_EVENT(mm_compaction_isolate_template, mm_compaction_isolate_freepages,
+	TP_PROTO(unsigned long nr_scanned,
+		unsigned long nr_taken),
+
+	TP_ARGS(nr_scanned, nr_taken)
+);
+
+TRACE_EVENT(mm_compaction_migratepages,
+
+	TP_PROTO(unsigned long nr_migrated,
+		unsigned long nr_failed),
+
+	TP_ARGS(nr_migrated, nr_failed),
+
+	TP_STRUCT__entry(
+		__field(unsigned long, nr_migrated)
+		__field(unsigned long, nr_failed)
+	),
+
+	TP_fast_assign(
+		__entry->nr_migrated = nr_migrated;
+		__entry->nr_failed = nr_failed;
+	),
+
+	TP_printk("nr_migrated=%lu nr_failed=%lu",
+		__entry->nr_migrated,
+		__entry->nr_failed)
+);
+
+
+#endif /* _TRACE_COMPACTION_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/cpufreq_interactive.h b/include/trace/events/cpufreq_interactive.h
new file mode 100644
index 00000000..951e6ca1
--- /dev/null
+++ b/include/trace/events/cpufreq_interactive.h
@@ -0,0 +1,112 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM cpufreq_interactive
+
+#if !defined(_TRACE_CPUFREQ_INTERACTIVE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_CPUFREQ_INTERACTIVE_H
+
+#include <linux/tracepoint.h>
+
+DECLARE_EVENT_CLASS(set,
+	TP_PROTO(u32 cpu_id, unsigned long targfreq,
+	         unsigned long actualfreq),
+	TP_ARGS(cpu_id, targfreq, actualfreq),
+
+	TP_STRUCT__entry(
+	    __field(          u32, cpu_id    )
+	    __field(unsigned long, targfreq   )
+	    __field(unsigned long, actualfreq )
+	   ),
+
+	TP_fast_assign(
+	    __entry->cpu_id = (u32) cpu_id;
+	    __entry->targfreq = targfreq;
+	    __entry->actualfreq = actualfreq;
+	),
+
+	TP_printk("cpu=%u targ=%lu actual=%lu",
+	      __entry->cpu_id, __entry->targfreq,
+	      __entry->actualfreq)
+);
+
+DEFINE_EVENT(set, cpufreq_interactive_setspeed,
+	TP_PROTO(u32 cpu_id, unsigned long targfreq,
+	     unsigned long actualfreq),
+	TP_ARGS(cpu_id, targfreq, actualfreq)
+);
+
+DECLARE_EVENT_CLASS(loadeval,
+	    TP_PROTO(unsigned long cpu_id, unsigned long load,
+		     unsigned long curtarg, unsigned long curactual,
+		     unsigned long newtarg),
+		    TP_ARGS(cpu_id, load, curtarg, curactual, newtarg),
+
+	    TP_STRUCT__entry(
+		    __field(unsigned long, cpu_id    )
+		    __field(unsigned long, load      )
+		    __field(unsigned long, curtarg   )
+		    __field(unsigned long, curactual )
+		    __field(unsigned long, newtarg   )
+	    ),
+
+	    TP_fast_assign(
+		    __entry->cpu_id = cpu_id;
+		    __entry->load = load;
+		    __entry->curtarg = curtarg;
+		    __entry->curactual = curactual;
+		    __entry->newtarg = newtarg;
+	    ),
+
+	    TP_printk("cpu=%lu load=%lu cur=%lu actual=%lu targ=%lu",
+		      __entry->cpu_id, __entry->load, __entry->curtarg,
+		      __entry->curactual, __entry->newtarg)
+);
+
+DEFINE_EVENT(loadeval, cpufreq_interactive_target,
+	    TP_PROTO(unsigned long cpu_id, unsigned long load,
+		     unsigned long curtarg, unsigned long curactual,
+		     unsigned long newtarg),
+	    TP_ARGS(cpu_id, load, curtarg, curactual, newtarg)
+);
+
+DEFINE_EVENT(loadeval, cpufreq_interactive_already,
+	    TP_PROTO(unsigned long cpu_id, unsigned long load,
+		     unsigned long curtarg, unsigned long curactual,
+		     unsigned long newtarg),
+	    TP_ARGS(cpu_id, load, curtarg, curactual, newtarg)
+);
+
+DEFINE_EVENT(loadeval, cpufreq_interactive_notyet,
+	    TP_PROTO(unsigned long cpu_id, unsigned long load,
+		     unsigned long curtarg, unsigned long curactual,
+		     unsigned long newtarg),
+	    TP_ARGS(cpu_id, load, curtarg, curactual, newtarg)
+);
+
+TRACE_EVENT(cpufreq_interactive_boost,
+	    TP_PROTO(const char *s),
+	    TP_ARGS(s),
+	    TP_STRUCT__entry(
+		    __string(s, s)
+	    ),
+	    TP_fast_assign(
+		    __assign_str(s, s);
+	    ),
+	    TP_printk("%s", __get_str(s))
+);
+
+TRACE_EVENT(cpufreq_interactive_unboost,
+	    TP_PROTO(const char *s),
+	    TP_ARGS(s),
+	    TP_STRUCT__entry(
+		    __string(s, s)
+	    ),
+	    TP_fast_assign(
+		    __assign_str(s, s);
+	    ),
+	    TP_printk("%s", __get_str(s))
+);
+
+#endif /* _TRACE_CPUFREQ_INTERACTIVE_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/ext3.h b/include/trace/events/ext3.h
new file mode 100644
index 00000000..7b53c057
--- /dev/null
+++ b/include/trace/events/ext3.h
@@ -0,0 +1,864 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM ext3
+
+#if !defined(_TRACE_EXT3_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_EXT3_H
+
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(ext3_free_inode,
+	TP_PROTO(struct inode *inode),
+
+	TP_ARGS(inode),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	umode_t, mode			)
+		__field(	uid_t,	uid			)
+		__field(	gid_t,	gid			)
+		__field(	blkcnt_t, blocks		)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->mode	= inode->i_mode;
+		__entry->uid	= inode->i_uid;
+		__entry->gid	= inode->i_gid;
+		__entry->blocks	= inode->i_blocks;
+	),
+
+	TP_printk("dev %d,%d ino %lu mode 0%o uid %u gid %u blocks %lu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->mode, __entry->uid, __entry->gid,
+		  (unsigned long) __entry->blocks)
+);
+
+TRACE_EVENT(ext3_request_inode,
+	TP_PROTO(struct inode *dir, int mode),
+
+	TP_ARGS(dir, mode),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	dir			)
+		__field(	umode_t, mode			)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= dir->i_sb->s_dev;
+		__entry->dir	= dir->i_ino;
+		__entry->mode	= mode;
+	),
+
+	TP_printk("dev %d,%d dir %lu mode 0%o",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->dir, __entry->mode)
+);
+
+TRACE_EVENT(ext3_allocate_inode,
+	TP_PROTO(struct inode *inode, struct inode *dir, int mode),
+
+	TP_ARGS(inode, dir, mode),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	ino_t,	dir			)
+		__field(	umode_t, mode			)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->dir	= dir->i_ino;
+		__entry->mode	= mode;
+	),
+
+	TP_printk("dev %d,%d ino %lu dir %lu mode 0%o",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  (unsigned long) __entry->dir, __entry->mode)
+);
+
+TRACE_EVENT(ext3_evict_inode,
+	TP_PROTO(struct inode *inode),
+
+	TP_ARGS(inode),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	int,	nlink			)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->nlink	= inode->i_nlink;
+	),
+
+	TP_printk("dev %d,%d ino %lu nlink %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino, __entry->nlink)
+);
+
+TRACE_EVENT(ext3_drop_inode,
+	TP_PROTO(struct inode *inode, int drop),
+
+	TP_ARGS(inode, drop),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	int,	drop			)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->drop	= drop;
+	),
+
+	TP_printk("dev %d,%d ino %lu drop %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino, __entry->drop)
+);
+
+TRACE_EVENT(ext3_mark_inode_dirty,
+	TP_PROTO(struct inode *inode, unsigned long IP),
+
+	TP_ARGS(inode, IP),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(unsigned long,	ip			)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->ip	= IP;
+	),
+
+	TP_printk("dev %d,%d ino %lu caller %pF",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino, (void *)__entry->ip)
+);
+
+TRACE_EVENT(ext3_write_begin,
+	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
+		 unsigned int flags),
+
+	TP_ARGS(inode, pos, len, flags),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	loff_t,	pos			)
+		__field(	unsigned int, len		)
+		__field(	unsigned int, flags		)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->pos	= pos;
+		__entry->len	= len;
+		__entry->flags	= flags;
+	),
+
+	TP_printk("dev %d,%d ino %lu pos %llu len %u flags %u",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  (unsigned long long) __entry->pos, __entry->len,
+		  __entry->flags)
+);
+
+DECLARE_EVENT_CLASS(ext3__write_end,
+	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
+			unsigned int copied),
+
+	TP_ARGS(inode, pos, len, copied),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	loff_t,	pos			)
+		__field(	unsigned int, len		)
+		__field(	unsigned int, copied		)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->pos	= pos;
+		__entry->len	= len;
+		__entry->copied	= copied;
+	),
+
+	TP_printk("dev %d,%d ino %lu pos %llu len %u copied %u",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  (unsigned long long) __entry->pos, __entry->len,
+		  __entry->copied)
+);
+
+DEFINE_EVENT(ext3__write_end, ext3_ordered_write_end,
+
+	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
+		 unsigned int copied),
+
+	TP_ARGS(inode, pos, len, copied)
+);
+
+DEFINE_EVENT(ext3__write_end, ext3_writeback_write_end,
+
+	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
+		 unsigned int copied),
+
+	TP_ARGS(inode, pos, len, copied)
+);
+
+DEFINE_EVENT(ext3__write_end, ext3_journalled_write_end,
+
+	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
+		 unsigned int copied),
+
+	TP_ARGS(inode, pos, len, copied)
+);
+
+DECLARE_EVENT_CLASS(ext3__page_op,
+	TP_PROTO(struct page *page),
+
+	TP_ARGS(page),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	pgoff_t, index			)
+
+	),
+
+	TP_fast_assign(
+		__entry->index	= page->index;
+		__entry->ino	= page->mapping->host->i_ino;
+		__entry->dev	= page->mapping->host->i_sb->s_dev;
+	),
+
+	TP_printk("dev %d,%d ino %lu page_index %lu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino, __entry->index)
+);
+
+DEFINE_EVENT(ext3__page_op, ext3_ordered_writepage,
+
+	TP_PROTO(struct page *page),
+
+	TP_ARGS(page)
+);
+
+DEFINE_EVENT(ext3__page_op, ext3_writeback_writepage,
+
+	TP_PROTO(struct page *page),
+
+	TP_ARGS(page)
+);
+
+DEFINE_EVENT(ext3__page_op, ext3_journalled_writepage,
+
+	TP_PROTO(struct page *page),
+
+	TP_ARGS(page)
+);
+
+DEFINE_EVENT(ext3__page_op, ext3_readpage,
+
+	TP_PROTO(struct page *page),
+
+	TP_ARGS(page)
+);
+
+DEFINE_EVENT(ext3__page_op, ext3_releasepage,
+
+	TP_PROTO(struct page *page),
+
+	TP_ARGS(page)
+);
+
+TRACE_EVENT(ext3_invalidatepage,
+	TP_PROTO(struct page *page, unsigned long offset),
+
+	TP_ARGS(page, offset),
+
+	TP_STRUCT__entry(
+		__field(	pgoff_t, index			)
+		__field(	unsigned long, offset		)
+		__field(	ino_t,	ino			)
+		__field(	dev_t,	dev			)
+
+	),
+
+	TP_fast_assign(
+		__entry->index	= page->index;
+		__entry->offset	= offset;
+		__entry->ino	= page->mapping->host->i_ino;
+		__entry->dev	= page->mapping->host->i_sb->s_dev;
+	),
+
+	TP_printk("dev %d,%d ino %lu page_index %lu offset %lu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->index, __entry->offset)
+);
+
+TRACE_EVENT(ext3_discard_blocks,
+	TP_PROTO(struct super_block *sb, unsigned long blk,
+			unsigned long count),
+
+	TP_ARGS(sb, blk, count),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,		dev		)
+		__field(	unsigned long,	blk		)
+		__field(	unsigned long,	count		)
+
+	),
+
+	TP_fast_assign(
+		__entry->dev	= sb->s_dev;
+		__entry->blk	= blk;
+		__entry->count	= count;
+	),
+
+	TP_printk("dev %d,%d blk %lu count %lu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->blk, __entry->count)
+);
+
+TRACE_EVENT(ext3_request_blocks,
+	TP_PROTO(struct inode *inode, unsigned long goal,
+		 unsigned long count),
+
+	TP_ARGS(inode, goal, count),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	unsigned long, count		)
+		__field(	unsigned long,	goal		)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->count	= count;
+		__entry->goal	= goal;
+	),
+
+	TP_printk("dev %d,%d ino %lu count %lu goal %lu ",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->count, __entry->goal)
+);
+
+TRACE_EVENT(ext3_allocate_blocks,
+	TP_PROTO(struct inode *inode, unsigned long goal,
+		 unsigned long count, unsigned long block),
+
+	TP_ARGS(inode, goal, count, block),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	unsigned long,	block		)
+		__field(	unsigned long, count		)
+		__field(	unsigned long,	goal		)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->block	= block;
+		__entry->count	= count;
+		__entry->goal	= goal;
+	),
+
+	TP_printk("dev %d,%d ino %lu count %lu block %lu goal %lu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		   __entry->count, __entry->block,
+		  __entry->goal)
+);
+
+TRACE_EVENT(ext3_free_blocks,
+	TP_PROTO(struct inode *inode, unsigned long block,
+		 unsigned long count),
+
+	TP_ARGS(inode, block, count),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	umode_t, mode			)
+		__field(	unsigned long,	block		)
+		__field(	unsigned long,	count		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= inode->i_sb->s_dev;
+		__entry->ino		= inode->i_ino;
+		__entry->mode		= inode->i_mode;
+		__entry->block		= block;
+		__entry->count		= count;
+	),
+
+	TP_printk("dev %d,%d ino %lu mode 0%o block %lu count %lu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->mode, __entry->block, __entry->count)
+);
+
+TRACE_EVENT(ext3_sync_file_enter,
+	TP_PROTO(struct file *file, int datasync),
+
+	TP_ARGS(file, datasync),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	ino_t,	parent			)
+		__field(	int,	datasync		)
+	),
+
+	TP_fast_assign(
+		struct dentry *dentry = file->f_path.dentry;
+
+		__entry->dev		= dentry->d_inode->i_sb->s_dev;
+		__entry->ino		= dentry->d_inode->i_ino;
+		__entry->datasync	= datasync;
+		__entry->parent		= dentry->d_parent->d_inode->i_ino;
+	),
+
+	TP_printk("dev %d,%d ino %lu parent %ld datasync %d ",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  (unsigned long) __entry->parent, __entry->datasync)
+);
+
+TRACE_EVENT(ext3_sync_file_exit,
+	TP_PROTO(struct inode *inode, int ret),
+
+	TP_ARGS(inode, ret),
+
+	TP_STRUCT__entry(
+		__field(	int,	ret			)
+		__field(	ino_t,	ino			)
+		__field(	dev_t,	dev			)
+	),
+
+	TP_fast_assign(
+		__entry->ret		= ret;
+		__entry->ino		= inode->i_ino;
+		__entry->dev		= inode->i_sb->s_dev;
+	),
+
+	TP_printk("dev %d,%d ino %lu ret %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->ret)
+);
+
+TRACE_EVENT(ext3_sync_fs,
+	TP_PROTO(struct super_block *sb, int wait),
+
+	TP_ARGS(sb, wait),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	int,	wait			)
+
+	),
+
+	TP_fast_assign(
+		__entry->dev	= sb->s_dev;
+		__entry->wait	= wait;
+	),
+
+	TP_printk("dev %d,%d wait %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->wait)
+);
+
+TRACE_EVENT(ext3_rsv_window_add,
+	TP_PROTO(struct super_block *sb,
+		 struct ext3_reserve_window_node *rsv_node),
+
+	TP_ARGS(sb, rsv_node),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,	start		)
+		__field(	unsigned long,	end		)
+		__field(	dev_t,	dev			)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= sb->s_dev;
+		__entry->start	= rsv_node->rsv_window._rsv_start;
+		__entry->end	= rsv_node->rsv_window._rsv_end;
+	),
+
+	TP_printk("dev %d,%d start %lu end %lu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->start, __entry->end)
+);
+
+TRACE_EVENT(ext3_discard_reservation,
+	TP_PROTO(struct inode *inode,
+		 struct ext3_reserve_window_node *rsv_node),
+
+	TP_ARGS(inode, rsv_node),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,	start		)
+		__field(	unsigned long,	end		)
+		__field(	ino_t,	ino			)
+		__field(	dev_t,	dev			)
+	),
+
+	TP_fast_assign(
+		__entry->start	= rsv_node->rsv_window._rsv_start;
+		__entry->end	= rsv_node->rsv_window._rsv_end;
+		__entry->ino	= inode->i_ino;
+		__entry->dev	= inode->i_sb->s_dev;
+	),
+
+	TP_printk("dev %d,%d ino %lu start %lu end %lu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long)__entry->ino, __entry->start,
+		  __entry->end)
+);
+
+TRACE_EVENT(ext3_alloc_new_reservation,
+	TP_PROTO(struct super_block *sb, unsigned long goal),
+
+	TP_ARGS(sb, goal),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	unsigned long,	goal		)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= sb->s_dev;
+		__entry->goal	= goal;
+	),
+
+	TP_printk("dev %d,%d goal %lu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->goal)
+);
+
+TRACE_EVENT(ext3_reserved,
+	TP_PROTO(struct super_block *sb, unsigned long block,
+		 struct ext3_reserve_window_node *rsv_node),
+
+	TP_ARGS(sb, block, rsv_node),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,	block		)
+		__field(	unsigned long,	start		)
+		__field(	unsigned long,	end		)
+		__field(	dev_t,	dev			)
+	),
+
+	TP_fast_assign(
+		__entry->block	= block;
+		__entry->start	= rsv_node->rsv_window._rsv_start;
+		__entry->end	= rsv_node->rsv_window._rsv_end;
+		__entry->dev	= sb->s_dev;
+	),
+
+	TP_printk("dev %d,%d block %lu, start %lu end %lu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->block, __entry->start, __entry->end)
+);
+
+TRACE_EVENT(ext3_forget,
+	TP_PROTO(struct inode *inode, int is_metadata, unsigned long block),
+
+	TP_ARGS(inode, is_metadata, block),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	umode_t, mode			)
+		__field(	int,	is_metadata		)
+		__field(	unsigned long,	block		)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->mode	= inode->i_mode;
+		__entry->is_metadata = is_metadata;
+		__entry->block	= block;
+	),
+
+	TP_printk("dev %d,%d ino %lu mode 0%o is_metadata %d block %lu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->mode, __entry->is_metadata, __entry->block)
+);
+
+TRACE_EVENT(ext3_read_block_bitmap,
+	TP_PROTO(struct super_block *sb, unsigned int group),
+
+	TP_ARGS(sb, group),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	__u32,	group			)
+
+	),
+
+	TP_fast_assign(
+		__entry->dev	= sb->s_dev;
+		__entry->group	= group;
+	),
+
+	TP_printk("dev %d,%d group %u",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->group)
+);
+
+TRACE_EVENT(ext3_direct_IO_enter,
+	TP_PROTO(struct inode *inode, loff_t offset, unsigned long len, int rw),
+
+	TP_ARGS(inode, offset, len, rw),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,	ino			)
+		__field(	dev_t,	dev			)
+		__field(	loff_t,	pos			)
+		__field(	unsigned long,	len		)
+		__field(	int,	rw			)
+	),
+
+	TP_fast_assign(
+		__entry->ino	= inode->i_ino;
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->pos	= offset;
+		__entry->len	= len;
+		__entry->rw	= rw;
+	),
+
+	TP_printk("dev %d,%d ino %lu pos %llu len %lu rw %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  (unsigned long long) __entry->pos, __entry->len,
+		  __entry->rw)
+);
+
+TRACE_EVENT(ext3_direct_IO_exit,
+	TP_PROTO(struct inode *inode, loff_t offset, unsigned long len,
+		 int rw, int ret),
+
+	TP_ARGS(inode, offset, len, rw, ret),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,	ino			)
+		__field(	dev_t,	dev			)
+		__field(	loff_t,	pos			)
+		__field(	unsigned long,	len		)
+		__field(	int,	rw			)
+		__field(	int,	ret			)
+	),
+
+	TP_fast_assign(
+		__entry->ino	= inode->i_ino;
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->pos	= offset;
+		__entry->len	= len;
+		__entry->rw	= rw;
+		__entry->ret	= ret;
+	),
+
+	TP_printk("dev %d,%d ino %lu pos %llu len %lu rw %d ret %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  (unsigned long long) __entry->pos, __entry->len,
+		  __entry->rw, __entry->ret)
+);
+
+TRACE_EVENT(ext3_unlink_enter,
+	TP_PROTO(struct inode *parent, struct dentry *dentry),
+
+	TP_ARGS(parent, dentry),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,	parent			)
+		__field(	ino_t,	ino			)
+		__field(	loff_t,	size			)
+		__field(	dev_t,	dev			)
+	),
+
+	TP_fast_assign(
+		__entry->parent		= parent->i_ino;
+		__entry->ino		= dentry->d_inode->i_ino;
+		__entry->size		= dentry->d_inode->i_size;
+		__entry->dev		= dentry->d_inode->i_sb->s_dev;
+	),
+
+	TP_printk("dev %d,%d ino %lu size %lld parent %ld",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  (unsigned long long)__entry->size,
+		  (unsigned long) __entry->parent)
+);
+
+TRACE_EVENT(ext3_unlink_exit,
+	TP_PROTO(struct dentry *dentry, int ret),
+
+	TP_ARGS(dentry, ret),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,	ino			)
+		__field(	dev_t,	dev			)
+		__field(	int,	ret			)
+	),
+
+	TP_fast_assign(
+		__entry->ino		= dentry->d_inode->i_ino;
+		__entry->dev		= dentry->d_inode->i_sb->s_dev;
+		__entry->ret		= ret;
+	),
+
+	TP_printk("dev %d,%d ino %lu ret %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->ret)
+);
+
+DECLARE_EVENT_CLASS(ext3__truncate,
+	TP_PROTO(struct inode *inode),
+
+	TP_ARGS(inode),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,		ino		)
+		__field(	dev_t,		dev		)
+		__field(	blkcnt_t,	blocks		)
+	),
+
+	TP_fast_assign(
+		__entry->ino    = inode->i_ino;
+		__entry->dev    = inode->i_sb->s_dev;
+		__entry->blocks	= inode->i_blocks;
+	),
+
+	TP_printk("dev %d,%d ino %lu blocks %lu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino, (unsigned long) __entry->blocks)
+);
+
+DEFINE_EVENT(ext3__truncate, ext3_truncate_enter,
+
+	TP_PROTO(struct inode *inode),
+
+	TP_ARGS(inode)
+);
+
+DEFINE_EVENT(ext3__truncate, ext3_truncate_exit,
+
+	TP_PROTO(struct inode *inode),
+
+	TP_ARGS(inode)
+);
+
+TRACE_EVENT(ext3_get_blocks_enter,
+	TP_PROTO(struct inode *inode, unsigned long lblk,
+		 unsigned long len, int create),
+
+	TP_ARGS(inode, lblk, len, create),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,		ino		)
+		__field(	dev_t,		dev		)
+		__field(	unsigned long,	lblk		)
+		__field(	unsigned long,	len		)
+		__field(	int,		create		)
+	),
+
+	TP_fast_assign(
+		__entry->ino    = inode->i_ino;
+		__entry->dev    = inode->i_sb->s_dev;
+		__entry->lblk	= lblk;
+		__entry->len	= len;
+		__entry->create	= create;
+	),
+
+	TP_printk("dev %d,%d ino %lu lblk %lu len %lu create %u",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->lblk, __entry->len, __entry->create)
+);
+
+TRACE_EVENT(ext3_get_blocks_exit,
+	TP_PROTO(struct inode *inode, unsigned long lblk,
+		 unsigned long pblk, unsigned long len, int ret),
+
+	TP_ARGS(inode, lblk, pblk, len, ret),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,		ino		)
+		__field(	dev_t,		dev		)
+		__field(	unsigned long,	lblk		)
+		__field(	unsigned long,	pblk		)
+		__field(	unsigned long,	len		)
+		__field(	int,		ret		)
+	),
+
+	TP_fast_assign(
+		__entry->ino    = inode->i_ino;
+		__entry->dev    = inode->i_sb->s_dev;
+		__entry->lblk	= lblk;
+		__entry->pblk	= pblk;
+		__entry->len	= len;
+		__entry->ret	= ret;
+	),
+
+	TP_printk("dev %d,%d ino %lu lblk %lu pblk %lu len %lu ret %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		   __entry->lblk, __entry->pblk,
+		  __entry->len, __entry->ret)
+);
+
+TRACE_EVENT(ext3_load_inode,
+	TP_PROTO(struct inode *inode),
+
+	TP_ARGS(inode),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,	ino		)
+		__field(	dev_t,	dev		)
+	),
+
+	TP_fast_assign(
+		__entry->ino		= inode->i_ino;
+		__entry->dev		= inode->i_sb->s_dev;
+	),
+
+	TP_printk("dev %d,%d ino %lu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino)
+);
+
+#endif /* _TRACE_EXT3_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h
new file mode 100644
index 00000000..319538bf
--- /dev/null
+++ b/include/trace/events/ext4.h
@@ -0,0 +1,2061 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM ext4
+
+#if !defined(_TRACE_EXT4_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_EXT4_H
+
+#include <linux/writeback.h>
+#include <linux/tracepoint.h>
+
+struct ext4_allocation_context;
+struct ext4_allocation_request;
+struct ext4_extent;
+struct ext4_prealloc_space;
+struct ext4_inode_info;
+struct mpage_da_data;
+struct ext4_map_blocks;
+struct ext4_extent;
+
+#define EXT4_I(inode) (container_of(inode, struct ext4_inode_info, vfs_inode))
+
+TRACE_EVENT(ext4_free_inode,
+	TP_PROTO(struct inode *inode),
+
+	TP_ARGS(inode),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u16, mode			)
+		__field(	uid_t,	uid			)
+		__field(	gid_t,	gid			)
+		__field(	__u64, blocks			)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->mode	= inode->i_mode;
+		__entry->uid	= inode->i_uid;
+		__entry->gid	= inode->i_gid;
+		__entry->blocks	= inode->i_blocks;
+	),
+
+	TP_printk("dev %d,%d ino %lu mode 0%o uid %u gid %u blocks %llu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino, __entry->mode,
+		  __entry->uid, __entry->gid, __entry->blocks)
+);
+
+TRACE_EVENT(ext4_request_inode,
+	TP_PROTO(struct inode *dir, int mode),
+
+	TP_ARGS(dir, mode),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	dir			)
+		__field(	__u16, mode			)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= dir->i_sb->s_dev;
+		__entry->dir	= dir->i_ino;
+		__entry->mode	= mode;
+	),
+
+	TP_printk("dev %d,%d dir %lu mode 0%o",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->dir, __entry->mode)
+);
+
+TRACE_EVENT(ext4_allocate_inode,
+	TP_PROTO(struct inode *inode, struct inode *dir, int mode),
+
+	TP_ARGS(inode, dir, mode),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	ino_t,	dir			)
+		__field(	__u16,	mode			)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->dir	= dir->i_ino;
+		__entry->mode	= mode;
+	),
+
+	TP_printk("dev %d,%d ino %lu dir %lu mode 0%o",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  (unsigned long) __entry->dir, __entry->mode)
+);
+
+TRACE_EVENT(ext4_evict_inode,
+	TP_PROTO(struct inode *inode),
+
+	TP_ARGS(inode),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	int,	nlink			)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->nlink	= inode->i_nlink;
+	),
+
+	TP_printk("dev %d,%d ino %lu nlink %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino, __entry->nlink)
+);
+
+TRACE_EVENT(ext4_drop_inode,
+	TP_PROTO(struct inode *inode, int drop),
+
+	TP_ARGS(inode, drop),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	int,	drop			)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->drop	= drop;
+	),
+
+	TP_printk("dev %d,%d ino %lu drop %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino, __entry->drop)
+);
+
+TRACE_EVENT(ext4_mark_inode_dirty,
+	TP_PROTO(struct inode *inode, unsigned long IP),
+
+	TP_ARGS(inode, IP),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(unsigned long,	ip			)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->ip	= IP;
+	),
+
+	TP_printk("dev %d,%d ino %lu caller %pF",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino, (void *)__entry->ip)
+);
+
+TRACE_EVENT(ext4_begin_ordered_truncate,
+	TP_PROTO(struct inode *inode, loff_t new_size),
+
+	TP_ARGS(inode, new_size),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	loff_t,	new_size		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= inode->i_sb->s_dev;
+		__entry->ino		= inode->i_ino;
+		__entry->new_size	= new_size;
+	),
+
+	TP_printk("dev %d,%d ino %lu new_size %lld",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->new_size)
+);
+
+DECLARE_EVENT_CLASS(ext4__write_begin,
+
+	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
+		 unsigned int flags),
+
+	TP_ARGS(inode, pos, len, flags),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	loff_t,	pos			)
+		__field(	unsigned int, len		)
+		__field(	unsigned int, flags		)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->pos	= pos;
+		__entry->len	= len;
+		__entry->flags	= flags;
+	),
+
+	TP_printk("dev %d,%d ino %lu pos %lld len %u flags %u",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->pos, __entry->len, __entry->flags)
+);
+
+DEFINE_EVENT(ext4__write_begin, ext4_write_begin,
+
+	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
+		 unsigned int flags),
+
+	TP_ARGS(inode, pos, len, flags)
+);
+
+DEFINE_EVENT(ext4__write_begin, ext4_da_write_begin,
+
+	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
+		 unsigned int flags),
+
+	TP_ARGS(inode, pos, len, flags)
+);
+
+DECLARE_EVENT_CLASS(ext4__write_end,
+	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
+			unsigned int copied),
+
+	TP_ARGS(inode, pos, len, copied),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	loff_t,	pos			)
+		__field(	unsigned int, len		)
+		__field(	unsigned int, copied		)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->pos	= pos;
+		__entry->len	= len;
+		__entry->copied	= copied;
+	),
+
+	TP_printk("dev %d,%d ino %lu pos %lld len %u copied %u",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->pos, __entry->len, __entry->copied)
+);
+
+DEFINE_EVENT(ext4__write_end, ext4_ordered_write_end,
+
+	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
+		 unsigned int copied),
+
+	TP_ARGS(inode, pos, len, copied)
+);
+
+DEFINE_EVENT(ext4__write_end, ext4_writeback_write_end,
+
+	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
+		 unsigned int copied),
+
+	TP_ARGS(inode, pos, len, copied)
+);
+
+DEFINE_EVENT(ext4__write_end, ext4_journalled_write_end,
+
+	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
+		 unsigned int copied),
+
+	TP_ARGS(inode, pos, len, copied)
+);
+
+DEFINE_EVENT(ext4__write_end, ext4_da_write_end,
+
+	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
+		 unsigned int copied),
+
+	TP_ARGS(inode, pos, len, copied)
+);
+
+TRACE_EVENT(ext4_da_writepages,
+	TP_PROTO(struct inode *inode, struct writeback_control *wbc),
+
+	TP_ARGS(inode, wbc),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	long,	nr_to_write		)
+		__field(	long,	pages_skipped		)
+		__field(	loff_t,	range_start		)
+		__field(	loff_t,	range_end		)
+		__field(	int,	sync_mode		)
+		__field(	char,	for_kupdate		)
+		__field(	char,	range_cyclic		)
+		__field(       pgoff_t,	writeback_index		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= inode->i_sb->s_dev;
+		__entry->ino		= inode->i_ino;
+		__entry->nr_to_write	= wbc->nr_to_write;
+		__entry->pages_skipped	= wbc->pages_skipped;
+		__entry->range_start	= wbc->range_start;
+		__entry->range_end	= wbc->range_end;
+		__entry->sync_mode	= wbc->sync_mode;
+		__entry->for_kupdate	= wbc->for_kupdate;
+		__entry->range_cyclic	= wbc->range_cyclic;
+		__entry->writeback_index = inode->i_mapping->writeback_index;
+	),
+
+	TP_printk("dev %d,%d ino %lu nr_to_write %ld pages_skipped %ld "
+		  "range_start %lld range_end %lld sync_mode %d"
+		  "for_kupdate %d range_cyclic %d writeback_index %lu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino, __entry->nr_to_write,
+		  __entry->pages_skipped, __entry->range_start,
+		  __entry->range_end, __entry->sync_mode,
+		  __entry->for_kupdate, __entry->range_cyclic,
+		  (unsigned long) __entry->writeback_index)
+);
+
+TRACE_EVENT(ext4_da_write_pages,
+	TP_PROTO(struct inode *inode, struct mpage_da_data *mpd),
+
+	TP_ARGS(inode, mpd),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u64,	b_blocknr		)
+		__field(	__u32,	b_size			)
+		__field(	__u32,	b_state			)
+		__field(	unsigned long,	first_page	)
+		__field(	int,	io_done			)
+		__field(	int,	pages_written		)
+		__field(	int,	sync_mode		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= inode->i_sb->s_dev;
+		__entry->ino		= inode->i_ino;
+		__entry->b_blocknr	= mpd->b_blocknr;
+		__entry->b_size		= mpd->b_size;
+		__entry->b_state	= mpd->b_state;
+		__entry->first_page	= mpd->first_page;
+		__entry->io_done	= mpd->io_done;
+		__entry->pages_written	= mpd->pages_written;
+		__entry->sync_mode	= mpd->wbc->sync_mode;
+	),
+
+	TP_printk("dev %d,%d ino %lu b_blocknr %llu b_size %u b_state 0x%04x "
+		  "first_page %lu io_done %d pages_written %d sync_mode %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->b_blocknr, __entry->b_size,
+		  __entry->b_state, __entry->first_page,
+		  __entry->io_done, __entry->pages_written,
+		  __entry->sync_mode
+                  )
+);
+
+TRACE_EVENT(ext4_da_writepages_result,
+	TP_PROTO(struct inode *inode, struct writeback_control *wbc,
+			int ret, int pages_written),
+
+	TP_ARGS(inode, wbc, ret, pages_written),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	int,	ret			)
+		__field(	int,	pages_written		)
+		__field(	long,	pages_skipped		)
+		__field(	int,	sync_mode		)
+		__field(       pgoff_t,	writeback_index		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= inode->i_sb->s_dev;
+		__entry->ino		= inode->i_ino;
+		__entry->ret		= ret;
+		__entry->pages_written	= pages_written;
+		__entry->pages_skipped	= wbc->pages_skipped;
+		__entry->sync_mode	= wbc->sync_mode;
+		__entry->writeback_index = inode->i_mapping->writeback_index;
+	),
+
+	TP_printk("dev %d,%d ino %lu ret %d pages_written %d pages_skipped %ld "
+		  "sync_mode %d writeback_index %lu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino, __entry->ret,
+		  __entry->pages_written, __entry->pages_skipped,
+		  __entry->sync_mode,
+		  (unsigned long) __entry->writeback_index)
+);
+
+DECLARE_EVENT_CLASS(ext4__page_op,
+	TP_PROTO(struct page *page),
+
+	TP_ARGS(page),
+
+	TP_STRUCT__entry(
+		__field(	pgoff_t, index			)
+		__field(	ino_t,	ino			)
+		__field(	dev_t,	dev			)
+
+	),
+
+	TP_fast_assign(
+		__entry->index	= page->index;
+		__entry->ino	= page->mapping->host->i_ino;
+		__entry->dev	= page->mapping->host->i_sb->s_dev;
+	),
+
+	TP_printk("dev %d,%d ino %lu page_index %lu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  (unsigned long) __entry->index)
+);
+
+DEFINE_EVENT(ext4__page_op, ext4_writepage,
+
+	TP_PROTO(struct page *page),
+
+	TP_ARGS(page)
+);
+
+DEFINE_EVENT(ext4__page_op, ext4_readpage,
+
+	TP_PROTO(struct page *page),
+
+	TP_ARGS(page)
+);
+
+DEFINE_EVENT(ext4__page_op, ext4_releasepage,
+
+	TP_PROTO(struct page *page),
+
+	TP_ARGS(page)
+);
+
+TRACE_EVENT(ext4_invalidatepage,
+	TP_PROTO(struct page *page, unsigned long offset),
+
+	TP_ARGS(page, offset),
+
+	TP_STRUCT__entry(
+		__field(	pgoff_t, index			)
+		__field(	unsigned long, offset		)
+		__field(	ino_t,	ino			)
+		__field(	dev_t,	dev			)
+
+	),
+
+	TP_fast_assign(
+		__entry->index	= page->index;
+		__entry->offset	= offset;
+		__entry->ino	= page->mapping->host->i_ino;
+		__entry->dev	= page->mapping->host->i_sb->s_dev;
+	),
+
+	TP_printk("dev %d,%d ino %lu page_index %lu offset %lu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  (unsigned long) __entry->index, __entry->offset)
+);
+
+TRACE_EVENT(ext4_discard_blocks,
+	TP_PROTO(struct super_block *sb, unsigned long long blk,
+			unsigned long long count),
+
+	TP_ARGS(sb, blk, count),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	__u64,	blk			)
+		__field(	__u64,	count			)
+
+	),
+
+	TP_fast_assign(
+		__entry->dev	= sb->s_dev;
+		__entry->blk	= blk;
+		__entry->count	= count;
+	),
+
+	TP_printk("dev %d,%d blk %llu count %llu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->blk, __entry->count)
+);
+
+DECLARE_EVENT_CLASS(ext4__mb_new_pa,
+	TP_PROTO(struct ext4_allocation_context *ac,
+		 struct ext4_prealloc_space *pa),
+
+	TP_ARGS(ac, pa),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u64,	pa_pstart		)
+		__field(	__u32,	pa_len			)
+		__field(	__u64,	pa_lstart		)
+
+	),
+
+	TP_fast_assign(
+		__entry->dev		= ac->ac_sb->s_dev;
+		__entry->ino		= ac->ac_inode->i_ino;
+		__entry->pa_pstart	= pa->pa_pstart;
+		__entry->pa_len		= pa->pa_len;
+		__entry->pa_lstart	= pa->pa_lstart;
+	),
+
+	TP_printk("dev %d,%d ino %lu pstart %llu len %u lstart %llu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->pa_pstart, __entry->pa_len, __entry->pa_lstart)
+);
+
+DEFINE_EVENT(ext4__mb_new_pa, ext4_mb_new_inode_pa,
+
+	TP_PROTO(struct ext4_allocation_context *ac,
+		 struct ext4_prealloc_space *pa),
+
+	TP_ARGS(ac, pa)
+);
+
+DEFINE_EVENT(ext4__mb_new_pa, ext4_mb_new_group_pa,
+
+	TP_PROTO(struct ext4_allocation_context *ac,
+		 struct ext4_prealloc_space *pa),
+
+	TP_ARGS(ac, pa)
+);
+
+TRACE_EVENT(ext4_mb_release_inode_pa,
+	TP_PROTO(struct ext4_prealloc_space *pa,
+		 unsigned long long block, unsigned int count),
+
+	TP_ARGS(pa, block, count),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u64,	block			)
+		__field(	__u32,	count			)
+
+	),
+
+	TP_fast_assign(
+		__entry->dev		= pa->pa_inode->i_sb->s_dev;
+		__entry->ino		= pa->pa_inode->i_ino;
+		__entry->block		= block;
+		__entry->count		= count;
+	),
+
+	TP_printk("dev %d,%d ino %lu block %llu count %u",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->block, __entry->count)
+);
+
+TRACE_EVENT(ext4_mb_release_group_pa,
+	TP_PROTO(struct super_block *sb, struct ext4_prealloc_space *pa),
+
+	TP_ARGS(sb, pa),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	__u64,	pa_pstart		)
+		__field(	__u32,	pa_len			)
+
+	),
+
+	TP_fast_assign(
+		__entry->dev		= sb->s_dev;
+		__entry->pa_pstart	= pa->pa_pstart;
+		__entry->pa_len		= pa->pa_len;
+	),
+
+	TP_printk("dev %d,%d pstart %llu len %u",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->pa_pstart, __entry->pa_len)
+);
+
+TRACE_EVENT(ext4_discard_preallocations,
+	TP_PROTO(struct inode *inode),
+
+	TP_ARGS(inode),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+	),
+
+	TP_printk("dev %d,%d ino %lu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino)
+);
+
+TRACE_EVENT(ext4_mb_discard_preallocations,
+	TP_PROTO(struct super_block *sb, int needed),
+
+	TP_ARGS(sb, needed),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	int,	needed			)
+
+	),
+
+	TP_fast_assign(
+		__entry->dev	= sb->s_dev;
+		__entry->needed	= needed;
+	),
+
+	TP_printk("dev %d,%d needed %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->needed)
+);
+
+TRACE_EVENT(ext4_request_blocks,
+	TP_PROTO(struct ext4_allocation_request *ar),
+
+	TP_ARGS(ar),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	unsigned int, flags		)
+		__field(	unsigned int, len		)
+		__field(	__u32,  logical			)
+		__field(	__u32,	lleft			)
+		__field(	__u32,	lright			)
+		__field(	__u64,	goal			)
+		__field(	__u64,	pleft			)
+		__field(	__u64,	pright			)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= ar->inode->i_sb->s_dev;
+		__entry->ino	= ar->inode->i_ino;
+		__entry->flags	= ar->flags;
+		__entry->len	= ar->len;
+		__entry->logical = ar->logical;
+		__entry->goal	= ar->goal;
+		__entry->lleft	= ar->lleft;
+		__entry->lright	= ar->lright;
+		__entry->pleft	= ar->pleft;
+		__entry->pright	= ar->pright;
+	),
+
+	TP_printk("dev %d,%d ino %lu flags %u len %u lblk %u goal %llu "
+		  "lleft %u lright %u pleft %llu pright %llu ",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino, __entry->flags,
+		  __entry->len, __entry->logical, __entry->goal,
+		  __entry->lleft, __entry->lright, __entry->pleft,
+		  __entry->pright)
+);
+
+TRACE_EVENT(ext4_allocate_blocks,
+	TP_PROTO(struct ext4_allocation_request *ar, unsigned long long block),
+
+	TP_ARGS(ar, block),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u64,	block			)
+		__field(	unsigned int, flags		)
+		__field(	unsigned int, len		)
+		__field(	__u32,  logical			)
+		__field(	__u32,	lleft			)
+		__field(	__u32,	lright			)
+		__field(	__u64,	goal			)
+		__field(	__u64,	pleft			)
+		__field(	__u64,	pright			)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= ar->inode->i_sb->s_dev;
+		__entry->ino	= ar->inode->i_ino;
+		__entry->block	= block;
+		__entry->flags	= ar->flags;
+		__entry->len	= ar->len;
+		__entry->logical = ar->logical;
+		__entry->goal	= ar->goal;
+		__entry->lleft	= ar->lleft;
+		__entry->lright	= ar->lright;
+		__entry->pleft	= ar->pleft;
+		__entry->pright	= ar->pright;
+	),
+
+	TP_printk("dev %d,%d ino %lu flags %u len %u block %llu lblk %u "
+		  "goal %llu lleft %u lright %u pleft %llu pright %llu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino, __entry->flags,
+		  __entry->len, __entry->block, __entry->logical,
+		  __entry->goal,  __entry->lleft, __entry->lright,
+		  __entry->pleft, __entry->pright)
+);
+
+TRACE_EVENT(ext4_free_blocks,
+	TP_PROTO(struct inode *inode, __u64 block, unsigned long count,
+		 int flags),
+
+	TP_ARGS(inode, block, count, flags),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u16,	mode			)
+		__field(	__u64,	block			)
+		__field(	unsigned long,	count		)
+		__field(	int,	flags			)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= inode->i_sb->s_dev;
+		__entry->ino		= inode->i_ino;
+		__entry->mode		= inode->i_mode;
+		__entry->block		= block;
+		__entry->count		= count;
+		__entry->flags		= flags;
+	),
+
+	TP_printk("dev %d,%d ino %lu mode 0%o block %llu count %lu flags %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->mode, __entry->block, __entry->count,
+		  __entry->flags)
+);
+
+TRACE_EVENT(ext4_sync_file_enter,
+	TP_PROTO(struct file *file, int datasync),
+
+	TP_ARGS(file, datasync),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	ino_t,	parent			)
+		__field(	int,	datasync		)
+	),
+
+	TP_fast_assign(
+		struct dentry *dentry = file->f_path.dentry;
+
+		__entry->dev		= dentry->d_inode->i_sb->s_dev;
+		__entry->ino		= dentry->d_inode->i_ino;
+		__entry->datasync	= datasync;
+		__entry->parent		= dentry->d_parent->d_inode->i_ino;
+	),
+
+	TP_printk("dev %d,%d ino %lu parent %lu datasync %d ",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  (unsigned long) __entry->parent, __entry->datasync)
+);
+
+TRACE_EVENT(ext4_sync_file_exit,
+	TP_PROTO(struct inode *inode, int ret),
+
+	TP_ARGS(inode, ret),
+
+	TP_STRUCT__entry(
+		__field(	int,	ret			)
+		__field(	ino_t,	ino			)
+		__field(	dev_t,	dev			)
+	),
+
+	TP_fast_assign(
+		__entry->ret		= ret;
+		__entry->ino		= inode->i_ino;
+		__entry->dev		= inode->i_sb->s_dev;
+	),
+
+	TP_printk("dev %d,%d ino %lu ret %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->ret)
+);
+
+TRACE_EVENT(ext4_sync_fs,
+	TP_PROTO(struct super_block *sb, int wait),
+
+	TP_ARGS(sb, wait),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	int,	wait			)
+
+	),
+
+	TP_fast_assign(
+		__entry->dev	= sb->s_dev;
+		__entry->wait	= wait;
+	),
+
+	TP_printk("dev %d,%d wait %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->wait)
+);
+
+TRACE_EVENT(ext4_alloc_da_blocks,
+	TP_PROTO(struct inode *inode),
+
+	TP_ARGS(inode),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field( unsigned int,	data_blocks	)
+		__field( unsigned int,	meta_blocks	)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->data_blocks = EXT4_I(inode)->i_reserved_data_blocks;
+		__entry->meta_blocks = EXT4_I(inode)->i_reserved_meta_blocks;
+	),
+
+	TP_printk("dev %d,%d ino %lu data_blocks %u meta_blocks %u",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->data_blocks, __entry->meta_blocks)
+);
+
+TRACE_EVENT(ext4_mballoc_alloc,
+	TP_PROTO(struct ext4_allocation_context *ac),
+
+	TP_ARGS(ac),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u16,	found			)
+		__field(	__u16,	groups			)
+		__field(	__u16,	buddy			)
+		__field(	__u16,	flags			)
+		__field(	__u16,	tail			)
+		__field(	__u8,	cr			)
+		__field(	__u32, 	orig_logical		)
+		__field(	  int,	orig_start		)
+		__field(	__u32, 	orig_group		)
+		__field(	  int,	orig_len		)
+		__field(	__u32, 	goal_logical		)
+		__field(	  int,	goal_start		)
+		__field(	__u32, 	goal_group		)
+		__field(	  int,	goal_len		)
+		__field(	__u32, 	result_logical		)
+		__field(	  int,	result_start		)
+		__field(	__u32, 	result_group		)
+		__field(	  int,	result_len		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= ac->ac_inode->i_sb->s_dev;
+		__entry->ino		= ac->ac_inode->i_ino;
+		__entry->found		= ac->ac_found;
+		__entry->flags		= ac->ac_flags;
+		__entry->groups		= ac->ac_groups_scanned;
+		__entry->buddy		= ac->ac_buddy;
+		__entry->tail		= ac->ac_tail;
+		__entry->cr		= ac->ac_criteria;
+		__entry->orig_logical	= ac->ac_o_ex.fe_logical;
+		__entry->orig_start	= ac->ac_o_ex.fe_start;
+		__entry->orig_group	= ac->ac_o_ex.fe_group;
+		__entry->orig_len	= ac->ac_o_ex.fe_len;
+		__entry->goal_logical	= ac->ac_g_ex.fe_logical;
+		__entry->goal_start	= ac->ac_g_ex.fe_start;
+		__entry->goal_group	= ac->ac_g_ex.fe_group;
+		__entry->goal_len	= ac->ac_g_ex.fe_len;
+		__entry->result_logical	= ac->ac_f_ex.fe_logical;
+		__entry->result_start	= ac->ac_f_ex.fe_start;
+		__entry->result_group	= ac->ac_f_ex.fe_group;
+		__entry->result_len	= ac->ac_f_ex.fe_len;
+	),
+
+	TP_printk("dev %d,%d inode %lu orig %u/%d/%u@%u goal %u/%d/%u@%u "
+		  "result %u/%d/%u@%u blks %u grps %u cr %u flags 0x%04x "
+		  "tail %u broken %u",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->orig_group, __entry->orig_start,
+		  __entry->orig_len, __entry->orig_logical,
+		  __entry->goal_group, __entry->goal_start,
+		  __entry->goal_len, __entry->goal_logical,
+		  __entry->result_group, __entry->result_start,
+		  __entry->result_len, __entry->result_logical,
+		  __entry->found, __entry->groups, __entry->cr,
+		  __entry->flags, __entry->tail,
+		  __entry->buddy ? 1 << __entry->buddy : 0)
+);
+
+TRACE_EVENT(ext4_mballoc_prealloc,
+	TP_PROTO(struct ext4_allocation_context *ac),
+
+	TP_ARGS(ac),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u32, 	orig_logical		)
+		__field(	  int,	orig_start		)
+		__field(	__u32, 	orig_group		)
+		__field(	  int,	orig_len		)
+		__field(	__u32, 	result_logical		)
+		__field(	  int,	result_start		)
+		__field(	__u32, 	result_group		)
+		__field(	  int,	result_len		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= ac->ac_inode->i_sb->s_dev;
+		__entry->ino		= ac->ac_inode->i_ino;
+		__entry->orig_logical	= ac->ac_o_ex.fe_logical;
+		__entry->orig_start	= ac->ac_o_ex.fe_start;
+		__entry->orig_group	= ac->ac_o_ex.fe_group;
+		__entry->orig_len	= ac->ac_o_ex.fe_len;
+		__entry->result_logical	= ac->ac_b_ex.fe_logical;
+		__entry->result_start	= ac->ac_b_ex.fe_start;
+		__entry->result_group	= ac->ac_b_ex.fe_group;
+		__entry->result_len	= ac->ac_b_ex.fe_len;
+	),
+
+	TP_printk("dev %d,%d inode %lu orig %u/%d/%u@%u result %u/%d/%u@%u",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->orig_group, __entry->orig_start,
+		  __entry->orig_len, __entry->orig_logical,
+		  __entry->result_group, __entry->result_start,
+		  __entry->result_len, __entry->result_logical)
+);
+
+DECLARE_EVENT_CLASS(ext4__mballoc,
+	TP_PROTO(struct super_block *sb,
+		 struct inode *inode,
+		 ext4_group_t group,
+		 ext4_grpblk_t start,
+		 ext4_grpblk_t len),
+
+	TP_ARGS(sb, inode, group, start, len),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	  int,	result_start		)
+		__field(	__u32, 	result_group		)
+		__field(	  int,	result_len		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= sb->s_dev;
+		__entry->ino		= inode ? inode->i_ino : 0;
+		__entry->result_start	= start;
+		__entry->result_group	= group;
+		__entry->result_len	= len;
+	),
+
+	TP_printk("dev %d,%d inode %lu extent %u/%d/%d ",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->result_group, __entry->result_start,
+		  __entry->result_len)
+);
+
+DEFINE_EVENT(ext4__mballoc, ext4_mballoc_discard,
+
+	TP_PROTO(struct super_block *sb,
+		 struct inode *inode,
+		 ext4_group_t group,
+		 ext4_grpblk_t start,
+		 ext4_grpblk_t len),
+
+	TP_ARGS(sb, inode, group, start, len)
+);
+
+DEFINE_EVENT(ext4__mballoc, ext4_mballoc_free,
+
+	TP_PROTO(struct super_block *sb,
+		 struct inode *inode,
+		 ext4_group_t group,
+		 ext4_grpblk_t start,
+		 ext4_grpblk_t len),
+
+	TP_ARGS(sb, inode, group, start, len)
+);
+
+TRACE_EVENT(ext4_forget,
+	TP_PROTO(struct inode *inode, int is_metadata, __u64 block),
+
+	TP_ARGS(inode, is_metadata, block),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u16,	mode			)
+		__field(	int,	is_metadata		)
+		__field(	__u64,	block			)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->mode	= inode->i_mode;
+		__entry->is_metadata = is_metadata;
+		__entry->block	= block;
+	),
+
+	TP_printk("dev %d,%d ino %lu mode 0%o is_metadata %d block %llu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->mode, __entry->is_metadata, __entry->block)
+);
+
+TRACE_EVENT(ext4_da_update_reserve_space,
+	TP_PROTO(struct inode *inode, int used_blocks, int quota_claim),
+
+	TP_ARGS(inode, used_blocks, quota_claim),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u16,	mode			)
+		__field(	__u64,	i_blocks		)
+		__field(	int,	used_blocks		)
+		__field(	int,	reserved_data_blocks	)
+		__field(	int,	reserved_meta_blocks	)
+		__field(	int,	allocated_meta_blocks	)
+		__field(	int,	quota_claim		)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->mode	= inode->i_mode;
+		__entry->i_blocks = inode->i_blocks;
+		__entry->used_blocks = used_blocks;
+		__entry->reserved_data_blocks =
+				EXT4_I(inode)->i_reserved_data_blocks;
+		__entry->reserved_meta_blocks =
+				EXT4_I(inode)->i_reserved_meta_blocks;
+		__entry->allocated_meta_blocks =
+				EXT4_I(inode)->i_allocated_meta_blocks;
+		__entry->quota_claim = quota_claim;
+	),
+
+	TP_printk("dev %d,%d ino %lu mode 0%o i_blocks %llu used_blocks %d "
+		  "reserved_data_blocks %d reserved_meta_blocks %d "
+		  "allocated_meta_blocks %d quota_claim %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->mode, __entry->i_blocks,
+		  __entry->used_blocks, __entry->reserved_data_blocks,
+		  __entry->reserved_meta_blocks, __entry->allocated_meta_blocks,
+		  __entry->quota_claim)
+);
+
+TRACE_EVENT(ext4_da_reserve_space,
+	TP_PROTO(struct inode *inode, int md_needed),
+
+	TP_ARGS(inode, md_needed),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u16,  mode			)
+		__field(	__u64,	i_blocks		)
+		__field(	int,	md_needed		)
+		__field(	int,	reserved_data_blocks	)
+		__field(	int,	reserved_meta_blocks	)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->mode	= inode->i_mode;
+		__entry->i_blocks = inode->i_blocks;
+		__entry->md_needed = md_needed;
+		__entry->reserved_data_blocks = EXT4_I(inode)->i_reserved_data_blocks;
+		__entry->reserved_meta_blocks = EXT4_I(inode)->i_reserved_meta_blocks;
+	),
+
+	TP_printk("dev %d,%d ino %lu mode 0%o i_blocks %llu md_needed %d "
+		  "reserved_data_blocks %d reserved_meta_blocks %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->mode, __entry->i_blocks,
+		  __entry->md_needed, __entry->reserved_data_blocks,
+		  __entry->reserved_meta_blocks)
+);
+
+TRACE_EVENT(ext4_da_release_space,
+	TP_PROTO(struct inode *inode, int freed_blocks),
+
+	TP_ARGS(inode, freed_blocks),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u16,  mode			)
+		__field(	__u64,	i_blocks		)
+		__field(	int,	freed_blocks		)
+		__field(	int,	reserved_data_blocks	)
+		__field(	int,	reserved_meta_blocks	)
+		__field(	int,	allocated_meta_blocks	)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+		__entry->mode	= inode->i_mode;
+		__entry->i_blocks = inode->i_blocks;
+		__entry->freed_blocks = freed_blocks;
+		__entry->reserved_data_blocks = EXT4_I(inode)->i_reserved_data_blocks;
+		__entry->reserved_meta_blocks = EXT4_I(inode)->i_reserved_meta_blocks;
+		__entry->allocated_meta_blocks = EXT4_I(inode)->i_allocated_meta_blocks;
+	),
+
+	TP_printk("dev %d,%d ino %lu mode 0%o i_blocks %llu freed_blocks %d "
+		  "reserved_data_blocks %d reserved_meta_blocks %d "
+		  "allocated_meta_blocks %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->mode, __entry->i_blocks,
+		  __entry->freed_blocks, __entry->reserved_data_blocks,
+		  __entry->reserved_meta_blocks, __entry->allocated_meta_blocks)
+);
+
+DECLARE_EVENT_CLASS(ext4__bitmap_load,
+	TP_PROTO(struct super_block *sb, unsigned long group),
+
+	TP_ARGS(sb, group),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	__u32,	group			)
+
+	),
+
+	TP_fast_assign(
+		__entry->dev	= sb->s_dev;
+		__entry->group	= group;
+	),
+
+	TP_printk("dev %d,%d group %u",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->group)
+);
+
+DEFINE_EVENT(ext4__bitmap_load, ext4_mb_bitmap_load,
+
+	TP_PROTO(struct super_block *sb, unsigned long group),
+
+	TP_ARGS(sb, group)
+);
+
+DEFINE_EVENT(ext4__bitmap_load, ext4_mb_buddy_bitmap_load,
+
+	TP_PROTO(struct super_block *sb, unsigned long group),
+
+	TP_ARGS(sb, group)
+);
+
+DEFINE_EVENT(ext4__bitmap_load, ext4_read_block_bitmap_load,
+
+	TP_PROTO(struct super_block *sb, unsigned long group),
+
+	TP_ARGS(sb, group)
+);
+
+DEFINE_EVENT(ext4__bitmap_load, ext4_load_inode_bitmap,
+
+	TP_PROTO(struct super_block *sb, unsigned long group),
+
+	TP_ARGS(sb, group)
+);
+
+TRACE_EVENT(ext4_direct_IO_enter,
+	TP_PROTO(struct inode *inode, loff_t offset, unsigned long len, int rw),
+
+	TP_ARGS(inode, offset, len, rw),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,	ino			)
+		__field(	dev_t,	dev			)
+		__field(	loff_t,	pos			)
+		__field(	unsigned long,	len		)
+		__field(	int,	rw			)
+	),
+
+	TP_fast_assign(
+		__entry->ino	= inode->i_ino;
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->pos	= offset;
+		__entry->len	= len;
+		__entry->rw	= rw;
+	),
+
+	TP_printk("dev %d,%d ino %lu pos %lld len %lu rw %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->pos, __entry->len, __entry->rw)
+);
+
+TRACE_EVENT(ext4_direct_IO_exit,
+	TP_PROTO(struct inode *inode, loff_t offset, unsigned long len,
+		 int rw, int ret),
+
+	TP_ARGS(inode, offset, len, rw, ret),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,	ino			)
+		__field(	dev_t,	dev			)
+		__field(	loff_t,	pos			)
+		__field(	unsigned long,	len		)
+		__field(	int,	rw			)
+		__field(	int,	ret			)
+	),
+
+	TP_fast_assign(
+		__entry->ino	= inode->i_ino;
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->pos	= offset;
+		__entry->len	= len;
+		__entry->rw	= rw;
+		__entry->ret	= ret;
+	),
+
+	TP_printk("dev %d,%d ino %lu pos %lld len %lu rw %d ret %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->pos, __entry->len,
+		  __entry->rw, __entry->ret)
+);
+
+TRACE_EVENT(ext4_fallocate_enter,
+	TP_PROTO(struct inode *inode, loff_t offset, loff_t len, int mode),
+
+	TP_ARGS(inode, offset, len, mode),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,	ino			)
+		__field(	dev_t,	dev			)
+		__field(	loff_t,	pos			)
+		__field(	loff_t,	len			)
+		__field(	int,	mode			)
+	),
+
+	TP_fast_assign(
+		__entry->ino	= inode->i_ino;
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->pos	= offset;
+		__entry->len	= len;
+		__entry->mode	= mode;
+	),
+
+	TP_printk("dev %d,%d ino %lu pos %lld len %lld mode %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino, __entry->pos,
+		  __entry->len, __entry->mode)
+);
+
+TRACE_EVENT(ext4_fallocate_exit,
+	TP_PROTO(struct inode *inode, loff_t offset,
+		 unsigned int max_blocks, int ret),
+
+	TP_ARGS(inode, offset, max_blocks, ret),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,	ino			)
+		__field(	dev_t,	dev			)
+		__field(	loff_t,	pos			)
+		__field(	unsigned int,	blocks		)
+		__field(	int, 	ret			)
+	),
+
+	TP_fast_assign(
+		__entry->ino	= inode->i_ino;
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->pos	= offset;
+		__entry->blocks	= max_blocks;
+		__entry->ret	= ret;
+	),
+
+	TP_printk("dev %d,%d ino %lu pos %lld blocks %u ret %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->pos, __entry->blocks,
+		  __entry->ret)
+);
+
+TRACE_EVENT(ext4_unlink_enter,
+	TP_PROTO(struct inode *parent, struct dentry *dentry),
+
+	TP_ARGS(parent, dentry),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,	parent			)
+		__field(	ino_t,	ino			)
+		__field(	loff_t,	size			)
+		__field(	dev_t,	dev			)
+	),
+
+	TP_fast_assign(
+		__entry->parent		= parent->i_ino;
+		__entry->ino		= dentry->d_inode->i_ino;
+		__entry->size		= dentry->d_inode->i_size;
+		__entry->dev		= dentry->d_inode->i_sb->s_dev;
+	),
+
+	TP_printk("dev %d,%d ino %lu size %lld parent %lu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino, __entry->size,
+		  (unsigned long) __entry->parent)
+);
+
+TRACE_EVENT(ext4_unlink_exit,
+	TP_PROTO(struct dentry *dentry, int ret),
+
+	TP_ARGS(dentry, ret),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,	ino			)
+		__field(	dev_t,	dev			)
+		__field(	int,	ret			)
+	),
+
+	TP_fast_assign(
+		__entry->ino		= dentry->d_inode->i_ino;
+		__entry->dev		= dentry->d_inode->i_sb->s_dev;
+		__entry->ret		= ret;
+	),
+
+	TP_printk("dev %d,%d ino %lu ret %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->ret)
+);
+
+DECLARE_EVENT_CLASS(ext4__truncate,
+	TP_PROTO(struct inode *inode),
+
+	TP_ARGS(inode),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,  	ino		)
+		__field(	dev_t,  	dev		)
+		__field(	__u64,		blocks		)
+	),
+
+	TP_fast_assign(
+		__entry->ino    = inode->i_ino;
+		__entry->dev    = inode->i_sb->s_dev;
+		__entry->blocks	= inode->i_blocks;
+	),
+
+	TP_printk("dev %d,%d ino %lu blocks %llu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino, __entry->blocks)
+);
+
+DEFINE_EVENT(ext4__truncate, ext4_truncate_enter,
+
+	TP_PROTO(struct inode *inode),
+
+	TP_ARGS(inode)
+);
+
+DEFINE_EVENT(ext4__truncate, ext4_truncate_exit,
+
+	TP_PROTO(struct inode *inode),
+
+	TP_ARGS(inode)
+);
+
+/* 'ux' is the uninitialized extent. */
+TRACE_EVENT(ext4_ext_convert_to_initialized_enter,
+	TP_PROTO(struct inode *inode, struct ext4_map_blocks *map,
+		 struct ext4_extent *ux),
+
+	TP_ARGS(inode, map, ux),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,		ino	)
+		__field(	dev_t,		dev	)
+		__field(	ext4_lblk_t,	m_lblk	)
+		__field(	unsigned,	m_len	)
+		__field(	ext4_lblk_t,	u_lblk	)
+		__field(	unsigned,	u_len	)
+		__field(	ext4_fsblk_t,	u_pblk	)
+	),
+
+	TP_fast_assign(
+		__entry->ino		= inode->i_ino;
+		__entry->dev		= inode->i_sb->s_dev;
+		__entry->m_lblk		= map->m_lblk;
+		__entry->m_len		= map->m_len;
+		__entry->u_lblk		= le32_to_cpu(ux->ee_block);
+		__entry->u_len		= ext4_ext_get_actual_len(ux);
+		__entry->u_pblk		= ext4_ext_pblock(ux);
+	),
+
+	TP_printk("dev %d,%d ino %lu m_lblk %u m_len %u u_lblk %u u_len %u "
+		  "u_pblk %llu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->m_lblk, __entry->m_len,
+		  __entry->u_lblk, __entry->u_len, __entry->u_pblk)
+);
+
+/*
+ * 'ux' is the uninitialized extent.
+ * 'ix' is the initialized extent to which blocks are transferred.
+ */
+TRACE_EVENT(ext4_ext_convert_to_initialized_fastpath,
+	TP_PROTO(struct inode *inode, struct ext4_map_blocks *map,
+		 struct ext4_extent *ux, struct ext4_extent *ix),
+
+	TP_ARGS(inode, map, ux, ix),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,		ino	)
+		__field(	dev_t,		dev	)
+		__field(	ext4_lblk_t,	m_lblk	)
+		__field(	unsigned,	m_len	)
+		__field(	ext4_lblk_t,	u_lblk	)
+		__field(	unsigned,	u_len	)
+		__field(	ext4_fsblk_t,	u_pblk	)
+		__field(	ext4_lblk_t,	i_lblk	)
+		__field(	unsigned,	i_len	)
+		__field(	ext4_fsblk_t,	i_pblk	)
+	),
+
+	TP_fast_assign(
+		__entry->ino		= inode->i_ino;
+		__entry->dev		= inode->i_sb->s_dev;
+		__entry->m_lblk		= map->m_lblk;
+		__entry->m_len		= map->m_len;
+		__entry->u_lblk		= le32_to_cpu(ux->ee_block);
+		__entry->u_len		= ext4_ext_get_actual_len(ux);
+		__entry->u_pblk		= ext4_ext_pblock(ux);
+		__entry->i_lblk		= le32_to_cpu(ix->ee_block);
+		__entry->i_len		= ext4_ext_get_actual_len(ix);
+		__entry->i_pblk		= ext4_ext_pblock(ix);
+	),
+
+	TP_printk("dev %d,%d ino %lu m_lblk %u m_len %u "
+		  "u_lblk %u u_len %u u_pblk %llu "
+		  "i_lblk %u i_len %u i_pblk %llu ",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->m_lblk, __entry->m_len,
+		  __entry->u_lblk, __entry->u_len, __entry->u_pblk,
+		  __entry->i_lblk, __entry->i_len, __entry->i_pblk)
+);
+
+DECLARE_EVENT_CLASS(ext4__map_blocks_enter,
+	TP_PROTO(struct inode *inode, ext4_lblk_t lblk,
+		 unsigned int len, unsigned int flags),
+
+	TP_ARGS(inode, lblk, len, flags),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,  	ino		)
+		__field(	dev_t,  	dev		)
+		__field(	ext4_lblk_t,	lblk		)
+		__field(	unsigned int,	len		)
+		__field(	unsigned int,	flags		)
+	),
+
+	TP_fast_assign(
+		__entry->ino    = inode->i_ino;
+		__entry->dev    = inode->i_sb->s_dev;
+		__entry->lblk	= lblk;
+		__entry->len	= len;
+		__entry->flags	= flags;
+	),
+
+	TP_printk("dev %d,%d ino %lu lblk %u len %u flags %u",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->lblk, __entry->len, __entry->flags)
+);
+
+DEFINE_EVENT(ext4__map_blocks_enter, ext4_ext_map_blocks_enter,
+	TP_PROTO(struct inode *inode, ext4_lblk_t lblk,
+		 unsigned len, unsigned flags),
+
+	TP_ARGS(inode, lblk, len, flags)
+);
+
+DEFINE_EVENT(ext4__map_blocks_enter, ext4_ind_map_blocks_enter,
+	TP_PROTO(struct inode *inode, ext4_lblk_t lblk,
+		 unsigned len, unsigned flags),
+
+	TP_ARGS(inode, lblk, len, flags)
+);
+
+DECLARE_EVENT_CLASS(ext4__map_blocks_exit,
+	TP_PROTO(struct inode *inode, ext4_lblk_t lblk,
+		 ext4_fsblk_t pblk, unsigned int len, int ret),
+
+	TP_ARGS(inode, lblk, pblk, len, ret),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,		ino		)
+		__field(	dev_t,		dev		)
+		__field(	ext4_lblk_t,	lblk		)
+		__field(	ext4_fsblk_t,	pblk		)
+		__field(	unsigned int,	len		)
+		__field(	int,		ret		)
+	),
+
+	TP_fast_assign(
+		__entry->ino    = inode->i_ino;
+		__entry->dev    = inode->i_sb->s_dev;
+		__entry->lblk	= lblk;
+		__entry->pblk	= pblk;
+		__entry->len	= len;
+		__entry->ret	= ret;
+	),
+
+	TP_printk("dev %d,%d ino %lu lblk %u pblk %llu len %u ret %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->lblk, __entry->pblk,
+		  __entry->len, __entry->ret)
+);
+
+DEFINE_EVENT(ext4__map_blocks_exit, ext4_ext_map_blocks_exit,
+	TP_PROTO(struct inode *inode, ext4_lblk_t lblk,
+		 ext4_fsblk_t pblk, unsigned len, int ret),
+
+	TP_ARGS(inode, lblk, pblk, len, ret)
+);
+
+DEFINE_EVENT(ext4__map_blocks_exit, ext4_ind_map_blocks_exit,
+	TP_PROTO(struct inode *inode, ext4_lblk_t lblk,
+		 ext4_fsblk_t pblk, unsigned len, int ret),
+
+	TP_ARGS(inode, lblk, pblk, len, ret)
+);
+
+TRACE_EVENT(ext4_ext_load_extent,
+	TP_PROTO(struct inode *inode, ext4_lblk_t lblk, ext4_fsblk_t pblk),
+
+	TP_ARGS(inode, lblk, pblk),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,		ino		)
+		__field(	dev_t,		dev		)
+		__field(	ext4_lblk_t,	lblk		)
+		__field(	ext4_fsblk_t,	pblk		)
+	),
+
+	TP_fast_assign(
+		__entry->ino    = inode->i_ino;
+		__entry->dev    = inode->i_sb->s_dev;
+		__entry->lblk	= lblk;
+		__entry->pblk	= pblk;
+	),
+
+	TP_printk("dev %d,%d ino %lu lblk %u pblk %llu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  __entry->lblk, __entry->pblk)
+);
+
+TRACE_EVENT(ext4_load_inode,
+	TP_PROTO(struct inode *inode),
+
+	TP_ARGS(inode),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,	ino		)
+		__field(	dev_t,	dev		)
+	),
+
+	TP_fast_assign(
+		__entry->ino		= inode->i_ino;
+		__entry->dev		= inode->i_sb->s_dev;
+	),
+
+	TP_printk("dev %d,%d ino %ld",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino)
+);
+
+TRACE_EVENT(ext4_journal_start,
+	TP_PROTO(struct super_block *sb, int nblocks, unsigned long IP),
+
+	TP_ARGS(sb, nblocks, IP),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	  int, 	nblocks			)
+		__field(unsigned long,	ip			)
+	),
+
+	TP_fast_assign(
+		__entry->dev	 = sb->s_dev;
+		__entry->nblocks = nblocks;
+		__entry->ip	 = IP;
+	),
+
+	TP_printk("dev %d,%d nblocks %d caller %pF",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->nblocks, (void *)__entry->ip)
+);
+
+DECLARE_EVENT_CLASS(ext4__trim,
+	TP_PROTO(struct super_block *sb,
+		 ext4_group_t group,
+		 ext4_grpblk_t start,
+		 ext4_grpblk_t len),
+
+	TP_ARGS(sb, group, start, len),
+
+	TP_STRUCT__entry(
+		__field(	int,	dev_major		)
+		__field(	int,	dev_minor		)
+		__field(	__u32, 	group			)
+		__field(	int,	start			)
+		__field(	int,	len			)
+	),
+
+	TP_fast_assign(
+		__entry->dev_major	= MAJOR(sb->s_dev);
+		__entry->dev_minor	= MINOR(sb->s_dev);
+		__entry->group		= group;
+		__entry->start		= start;
+		__entry->len		= len;
+	),
+
+	TP_printk("dev %d,%d group %u, start %d, len %d",
+		  __entry->dev_major, __entry->dev_minor,
+		  __entry->group, __entry->start, __entry->len)
+);
+
+DEFINE_EVENT(ext4__trim, ext4_trim_extent,
+
+	TP_PROTO(struct super_block *sb,
+		 ext4_group_t group,
+		 ext4_grpblk_t start,
+		 ext4_grpblk_t len),
+
+	TP_ARGS(sb, group, start, len)
+);
+
+DEFINE_EVENT(ext4__trim, ext4_trim_all_free,
+
+	TP_PROTO(struct super_block *sb,
+		 ext4_group_t group,
+		 ext4_grpblk_t start,
+		 ext4_grpblk_t len),
+
+	TP_ARGS(sb, group, start, len)
+);
+
+TRACE_EVENT(ext4_ext_handle_uninitialized_extents,
+	TP_PROTO(struct inode *inode, struct ext4_map_blocks *map,
+		 unsigned int allocated, ext4_fsblk_t newblock),
+
+	TP_ARGS(inode, map, allocated, newblock),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,		ino		)
+		__field(	dev_t,		dev		)
+		__field(	ext4_lblk_t,	lblk		)
+		__field(	ext4_fsblk_t,	pblk		)
+		__field(	unsigned int,	len		)
+		__field(	int,		flags		)
+		__field(	unsigned int,	allocated	)
+		__field(	ext4_fsblk_t,	newblk		)
+	),
+
+	TP_fast_assign(
+		__entry->ino		= inode->i_ino;
+		__entry->dev		= inode->i_sb->s_dev;
+		__entry->lblk		= map->m_lblk;
+		__entry->pblk		= map->m_pblk;
+		__entry->len		= map->m_len;
+		__entry->flags		= map->m_flags;
+		__entry->allocated	= allocated;
+		__entry->newblk		= newblock;
+	),
+
+	TP_printk("dev %d,%d ino %lu m_lblk %u m_pblk %llu m_len %u flags %d"
+		  "allocated %d newblock %llu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  (unsigned) __entry->lblk, (unsigned long long) __entry->pblk,
+		  __entry->len, __entry->flags,
+		  (unsigned int) __entry->allocated,
+		  (unsigned long long) __entry->newblk)
+);
+
+TRACE_EVENT(ext4_get_implied_cluster_alloc_exit,
+	TP_PROTO(struct super_block *sb, struct ext4_map_blocks *map, int ret),
+
+	TP_ARGS(sb, map, ret),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,		dev	)
+		__field(	ext4_lblk_t,	lblk	)
+		__field(	ext4_fsblk_t,	pblk	)
+		__field(	unsigned int,	len	)
+		__field(	unsigned int,	flags	)
+		__field(	int,		ret	)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= sb->s_dev;
+		__entry->lblk	= map->m_lblk;
+		__entry->pblk	= map->m_pblk;
+		__entry->len	= map->m_len;
+		__entry->flags	= map->m_flags;
+		__entry->ret	= ret;
+	),
+
+	TP_printk("dev %d,%d m_lblk %u m_pblk %llu m_len %u m_flags %u ret %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->lblk, (unsigned long long) __entry->pblk,
+		  __entry->len, __entry->flags, __entry->ret)
+);
+
+TRACE_EVENT(ext4_ext_put_in_cache,
+	TP_PROTO(struct inode *inode, ext4_lblk_t lblk, unsigned int len,
+		 ext4_fsblk_t start),
+
+	TP_ARGS(inode, lblk, len, start),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,		ino	)
+		__field(	dev_t,		dev	)
+		__field(	ext4_lblk_t,	lblk	)
+		__field(	unsigned int,	len	)
+		__field(	ext4_fsblk_t,	start	)
+	),
+
+	TP_fast_assign(
+		__entry->ino	= inode->i_ino;
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->lblk	= lblk;
+		__entry->len	= len;
+		__entry->start	= start;
+	),
+
+	TP_printk("dev %d,%d ino %lu lblk %u len %u start %llu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  (unsigned) __entry->lblk,
+		  __entry->len,
+		  (unsigned long long) __entry->start)
+);
+
+TRACE_EVENT(ext4_ext_in_cache,
+	TP_PROTO(struct inode *inode, ext4_lblk_t lblk, int ret),
+
+	TP_ARGS(inode, lblk, ret),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,		ino	)
+		__field(	dev_t,		dev	)
+		__field(	ext4_lblk_t,	lblk	)
+		__field(	int,		ret	)
+	),
+
+	TP_fast_assign(
+		__entry->ino	= inode->i_ino;
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->lblk	= lblk;
+		__entry->ret	= ret;
+	),
+
+	TP_printk("dev %d,%d ino %lu lblk %u ret %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  (unsigned) __entry->lblk,
+		  __entry->ret)
+
+);
+
+TRACE_EVENT(ext4_find_delalloc_range,
+	TP_PROTO(struct inode *inode, ext4_lblk_t from, ext4_lblk_t to,
+		int reverse, int found, ext4_lblk_t found_blk),
+
+	TP_ARGS(inode, from, to, reverse, found, found_blk),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,		ino		)
+		__field(	dev_t,		dev		)
+		__field(	ext4_lblk_t,	from		)
+		__field(	ext4_lblk_t,	to		)
+		__field(	int,		reverse		)
+		__field(	int,		found		)
+		__field(	ext4_lblk_t,	found_blk	)
+	),
+
+	TP_fast_assign(
+		__entry->ino		= inode->i_ino;
+		__entry->dev		= inode->i_sb->s_dev;
+		__entry->from		= from;
+		__entry->to		= to;
+		__entry->reverse	= reverse;
+		__entry->found		= found;
+		__entry->found_blk	= found_blk;
+	),
+
+	TP_printk("dev %d,%d ino %lu from %u to %u reverse %d found %d "
+		  "(blk = %u)",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  (unsigned) __entry->from, (unsigned) __entry->to,
+		  __entry->reverse, __entry->found,
+		  (unsigned) __entry->found_blk)
+);
+
+TRACE_EVENT(ext4_get_reserved_cluster_alloc,
+	TP_PROTO(struct inode *inode, ext4_lblk_t lblk, unsigned int len),
+
+	TP_ARGS(inode, lblk, len),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,		ino	)
+		__field(	dev_t,		dev	)
+		__field(	ext4_lblk_t,	lblk	)
+		__field(	unsigned int,	len	)
+	),
+
+	TP_fast_assign(
+		__entry->ino	= inode->i_ino;
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->lblk	= lblk;
+		__entry->len	= len;
+	),
+
+	TP_printk("dev %d,%d ino %lu lblk %u len %u",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  (unsigned) __entry->lblk,
+		  __entry->len)
+);
+
+TRACE_EVENT(ext4_ext_show_extent,
+	TP_PROTO(struct inode *inode, ext4_lblk_t lblk, ext4_fsblk_t pblk,
+		 unsigned short len),
+
+	TP_ARGS(inode, lblk, pblk, len),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,		ino	)
+		__field(	dev_t,		dev	)
+		__field(	ext4_lblk_t,	lblk	)
+		__field(	ext4_fsblk_t,	pblk	)
+		__field(	unsigned short,	len	)
+	),
+
+	TP_fast_assign(
+		__entry->ino	= inode->i_ino;
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->lblk	= lblk;
+		__entry->pblk	= pblk;
+		__entry->len	= len;
+	),
+
+	TP_printk("dev %d,%d ino %lu lblk %u pblk %llu len %u",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  (unsigned) __entry->lblk,
+		  (unsigned long long) __entry->pblk,
+		  (unsigned short) __entry->len)
+);
+
+TRACE_EVENT(ext4_remove_blocks,
+	    TP_PROTO(struct inode *inode, struct ext4_extent *ex,
+		ext4_lblk_t from, ext4_fsblk_t to,
+		ext4_fsblk_t partial_cluster),
+
+	TP_ARGS(inode, ex, from, to, partial_cluster),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,		ino	)
+		__field(	dev_t,		dev	)
+		__field(	ext4_lblk_t,	ee_lblk	)
+		__field(	ext4_fsblk_t,	ee_pblk	)
+		__field(	unsigned short,	ee_len	)
+		__field(	ext4_lblk_t,	from	)
+		__field(	ext4_lblk_t,	to	)
+		__field(	ext4_fsblk_t,	partial	)
+	),
+
+	TP_fast_assign(
+		__entry->ino		= inode->i_ino;
+		__entry->dev		= inode->i_sb->s_dev;
+		__entry->ee_lblk	= cpu_to_le32(ex->ee_block);
+		__entry->ee_pblk	= ext4_ext_pblock(ex);
+		__entry->ee_len		= ext4_ext_get_actual_len(ex);
+		__entry->from		= from;
+		__entry->to		= to;
+		__entry->partial	= partial_cluster;
+	),
+
+	TP_printk("dev %d,%d ino %lu extent [%u(%llu), %u]"
+		  "from %u to %u partial_cluster %u",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  (unsigned) __entry->ee_lblk,
+		  (unsigned long long) __entry->ee_pblk,
+		  (unsigned short) __entry->ee_len,
+		  (unsigned) __entry->from,
+		  (unsigned) __entry->to,
+		  (unsigned) __entry->partial)
+);
+
+TRACE_EVENT(ext4_ext_rm_leaf,
+	TP_PROTO(struct inode *inode, ext4_lblk_t start,
+		 struct ext4_extent *ex, ext4_fsblk_t partial_cluster),
+
+	TP_ARGS(inode, start, ex, partial_cluster),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,		ino	)
+		__field(	dev_t,		dev	)
+		__field(	ext4_lblk_t,	start	)
+		__field(	ext4_lblk_t,	ee_lblk	)
+		__field(	ext4_fsblk_t,	ee_pblk	)
+		__field(	short,		ee_len	)
+		__field(	ext4_fsblk_t,	partial	)
+	),
+
+	TP_fast_assign(
+		__entry->ino		= inode->i_ino;
+		__entry->dev		= inode->i_sb->s_dev;
+		__entry->start		= start;
+		__entry->ee_lblk	= le32_to_cpu(ex->ee_block);
+		__entry->ee_pblk	= ext4_ext_pblock(ex);
+		__entry->ee_len		= ext4_ext_get_actual_len(ex);
+		__entry->partial	= partial_cluster;
+	),
+
+	TP_printk("dev %d,%d ino %lu start_lblk %u last_extent [%u(%llu), %u]"
+		  "partial_cluster %u",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  (unsigned) __entry->start,
+		  (unsigned) __entry->ee_lblk,
+		  (unsigned long long) __entry->ee_pblk,
+		  (unsigned short) __entry->ee_len,
+		  (unsigned) __entry->partial)
+);
+
+TRACE_EVENT(ext4_ext_rm_idx,
+	TP_PROTO(struct inode *inode, ext4_fsblk_t pblk),
+
+	TP_ARGS(inode, pblk),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,		ino	)
+		__field(	dev_t,		dev	)
+		__field(	ext4_fsblk_t,	pblk	)
+	),
+
+	TP_fast_assign(
+		__entry->ino	= inode->i_ino;
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->pblk	= pblk;
+	),
+
+	TP_printk("dev %d,%d ino %lu index_pblk %llu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  (unsigned long long) __entry->pblk)
+);
+
+TRACE_EVENT(ext4_ext_remove_space,
+	TP_PROTO(struct inode *inode, ext4_lblk_t start, int depth),
+
+	TP_ARGS(inode, start, depth),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,		ino	)
+		__field(	dev_t,		dev	)
+		__field(	ext4_lblk_t,	start	)
+		__field(	int,		depth	)
+	),
+
+	TP_fast_assign(
+		__entry->ino	= inode->i_ino;
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->start	= start;
+		__entry->depth	= depth;
+	),
+
+	TP_printk("dev %d,%d ino %lu since %u depth %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  (unsigned) __entry->start,
+		  __entry->depth)
+);
+
+TRACE_EVENT(ext4_ext_remove_space_done,
+	TP_PROTO(struct inode *inode, ext4_lblk_t start, int depth,
+		ext4_lblk_t partial, unsigned short eh_entries),
+
+	TP_ARGS(inode, start, depth, partial, eh_entries),
+
+	TP_STRUCT__entry(
+		__field(	ino_t,		ino		)
+		__field(	dev_t,		dev		)
+		__field(	ext4_lblk_t,	start		)
+		__field(	int,		depth		)
+		__field(	ext4_lblk_t,	partial		)
+		__field(	unsigned short,	eh_entries	)
+	),
+
+	TP_fast_assign(
+		__entry->ino		= inode->i_ino;
+		__entry->dev		= inode->i_sb->s_dev;
+		__entry->start		= start;
+		__entry->depth		= depth;
+		__entry->partial	= partial;
+		__entry->eh_entries	= eh_entries;
+	),
+
+	TP_printk("dev %d,%d ino %lu since %u depth %d partial %u "
+		  "remaining_entries %u",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino,
+		  (unsigned) __entry->start,
+		  __entry->depth,
+		  (unsigned) __entry->partial,
+		  (unsigned short) __entry->eh_entries)
+);
+
+#endif /* _TRACE_EXT4_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/gfpflags.h b/include/trace/events/gfpflags.h
new file mode 100644
index 00000000..9fe3a366
--- /dev/null
+++ b/include/trace/events/gfpflags.h
@@ -0,0 +1,41 @@
+/*
+ * The order of these masks is important. Matching masks will be seen
+ * first and the left over flags will end up showing by themselves.
+ *
+ * For example, if we have GFP_KERNEL before GFP_USER we wil get:
+ *
+ *  GFP_KERNEL|GFP_HARDWALL
+ *
+ * Thus most bits set go first.
+ */
+#define show_gfp_flags(flags)						\
+	(flags) ? __print_flags(flags, "|",				\
+	{(unsigned long)GFP_TRANSHUGE,		"GFP_TRANSHUGE"},	\
+	{(unsigned long)GFP_HIGHUSER_MOVABLE,	"GFP_HIGHUSER_MOVABLE"}, \
+	{(unsigned long)GFP_HIGHUSER,		"GFP_HIGHUSER"},	\
+	{(unsigned long)GFP_USER,		"GFP_USER"},		\
+	{(unsigned long)GFP_TEMPORARY,		"GFP_TEMPORARY"},	\
+	{(unsigned long)GFP_KERNEL,		"GFP_KERNEL"},		\
+	{(unsigned long)GFP_NOFS,		"GFP_NOFS"},		\
+	{(unsigned long)GFP_ATOMIC,		"GFP_ATOMIC"},		\
+	{(unsigned long)GFP_NOIO,		"GFP_NOIO"},		\
+	{(unsigned long)__GFP_HIGH,		"GFP_HIGH"},		\
+	{(unsigned long)__GFP_WAIT,		"GFP_WAIT"},		\
+	{(unsigned long)__GFP_IO,		"GFP_IO"},		\
+	{(unsigned long)__GFP_COLD,		"GFP_COLD"},		\
+	{(unsigned long)__GFP_NOWARN,		"GFP_NOWARN"},		\
+	{(unsigned long)__GFP_REPEAT,		"GFP_REPEAT"},		\
+	{(unsigned long)__GFP_NOFAIL,		"GFP_NOFAIL"},		\
+	{(unsigned long)__GFP_NORETRY,		"GFP_NORETRY"},		\
+	{(unsigned long)__GFP_COMP,		"GFP_COMP"},		\
+	{(unsigned long)__GFP_ZERO,		"GFP_ZERO"},		\
+	{(unsigned long)__GFP_NOMEMALLOC,	"GFP_NOMEMALLOC"},	\
+	{(unsigned long)__GFP_HARDWALL,		"GFP_HARDWALL"},	\
+	{(unsigned long)__GFP_THISNODE,		"GFP_THISNODE"},	\
+	{(unsigned long)__GFP_RECLAIMABLE,	"GFP_RECLAIMABLE"},	\
+	{(unsigned long)__GFP_MOVABLE,		"GFP_MOVABLE"},		\
+	{(unsigned long)__GFP_NOTRACK,		"GFP_NOTRACK"},		\
+	{(unsigned long)__GFP_NO_KSWAPD,	"GFP_NO_KSWAPD"},	\
+	{(unsigned long)__GFP_OTHER_NODE,	"GFP_OTHER_NODE"}	\
+	) : "GFP_NOWAIT"
+
diff --git a/include/trace/events/gpio.h b/include/trace/events/gpio.h
new file mode 100644
index 00000000..927a8ad9
--- /dev/null
+++ b/include/trace/events/gpio.h
@@ -0,0 +1,56 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM gpio
+
+#if !defined(_TRACE_GPIO_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_GPIO_H
+
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(gpio_direction,
+
+	TP_PROTO(unsigned gpio, int in, int err),
+
+	TP_ARGS(gpio, in, err),
+
+	TP_STRUCT__entry(
+		__field(unsigned, gpio)
+		__field(int, in)
+		__field(int, err)
+	),
+
+	TP_fast_assign(
+		__entry->gpio = gpio;
+		__entry->in = in;
+		__entry->err = err;
+	),
+
+	TP_printk("%u %3s (%d)", __entry->gpio,
+		__entry->in ? "in" : "out", __entry->err)
+);
+
+TRACE_EVENT(gpio_value,
+
+	TP_PROTO(unsigned gpio, int get, int value),
+
+	TP_ARGS(gpio, get, value),
+
+	TP_STRUCT__entry(
+		__field(unsigned, gpio)
+		__field(int, get)
+		__field(int, value)
+	),
+
+	TP_fast_assign(
+		__entry->gpio = gpio;
+		__entry->get = get;
+		__entry->value = value;
+	),
+
+	TP_printk("%u %3s %d", __entry->gpio,
+		__entry->get ? "get" : "set", __entry->value)
+);
+
+#endif /* if !defined(_TRACE_GPIO_H) || defined(TRACE_HEADER_MULTI_READ) */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/irq.h b/include/trace/events/irq.h
new file mode 100644
index 00000000..1c09820d
--- /dev/null
+++ b/include/trace/events/irq.h
@@ -0,0 +1,150 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM irq
+
+#if !defined(_TRACE_IRQ_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_IRQ_H
+
+#include <linux/tracepoint.h>
+
+struct irqaction;
+struct softirq_action;
+
+#define softirq_name(sirq) { sirq##_SOFTIRQ, #sirq }
+#define show_softirq_name(val)				\
+	__print_symbolic(val,				\
+			 softirq_name(HI),		\
+			 softirq_name(TIMER),		\
+			 softirq_name(NET_TX),		\
+			 softirq_name(NET_RX),		\
+			 softirq_name(BLOCK),		\
+			 softirq_name(BLOCK_IOPOLL),	\
+			 softirq_name(TASKLET),		\
+			 softirq_name(SCHED),		\
+			 softirq_name(HRTIMER),		\
+			 softirq_name(RCU))
+
+/**
+ * irq_handler_entry - called immediately before the irq action handler
+ * @irq: irq number
+ * @action: pointer to struct irqaction
+ *
+ * The struct irqaction pointed to by @action contains various
+ * information about the handler, including the device name,
+ * @action->name, and the device id, @action->dev_id. When used in
+ * conjunction with the irq_handler_exit tracepoint, we can figure
+ * out irq handler latencies.
+ */
+TRACE_EVENT(irq_handler_entry,
+
+	TP_PROTO(int irq, struct irqaction *action),
+
+	TP_ARGS(irq, action),
+
+	TP_STRUCT__entry(
+		__field(	int,	irq		)
+		__string(	name,	action->name	)
+	),
+
+	TP_fast_assign(
+		__entry->irq = irq;
+		__assign_str(name, action->name);
+	),
+
+	TP_printk("irq=%d name=%s", __entry->irq, __get_str(name))
+);
+
+/**
+ * irq_handler_exit - called immediately after the irq action handler returns
+ * @irq: irq number
+ * @action: pointer to struct irqaction
+ * @ret: return value
+ *
+ * If the @ret value is set to IRQ_HANDLED, then we know that the corresponding
+ * @action->handler scuccessully handled this irq. Otherwise, the irq might be
+ * a shared irq line, or the irq was not handled successfully. Can be used in
+ * conjunction with the irq_handler_entry to understand irq handler latencies.
+ */
+TRACE_EVENT(irq_handler_exit,
+
+	TP_PROTO(int irq, struct irqaction *action, int ret),
+
+	TP_ARGS(irq, action, ret),
+
+	TP_STRUCT__entry(
+		__field(	int,	irq	)
+		__field(	int,	ret	)
+	),
+
+	TP_fast_assign(
+		__entry->irq	= irq;
+		__entry->ret	= ret;
+	),
+
+	TP_printk("irq=%d ret=%s",
+		  __entry->irq, __entry->ret ? "handled" : "unhandled")
+);
+
+DECLARE_EVENT_CLASS(softirq,
+
+	TP_PROTO(unsigned int vec_nr),
+
+	TP_ARGS(vec_nr),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int,	vec	)
+	),
+
+	TP_fast_assign(
+		__entry->vec = vec_nr;
+	),
+
+	TP_printk("vec=%u [action=%s]", __entry->vec,
+		  show_softirq_name(__entry->vec))
+);
+
+/**
+ * softirq_entry - called immediately before the softirq handler
+ * @vec_nr:  softirq vector number
+ *
+ * When used in combination with the softirq_exit tracepoint
+ * we can determine the softirq handler runtine.
+ */
+DEFINE_EVENT(softirq, softirq_entry,
+
+	TP_PROTO(unsigned int vec_nr),
+
+	TP_ARGS(vec_nr)
+);
+
+/**
+ * softirq_exit - called immediately after the softirq handler returns
+ * @vec_nr:  softirq vector number
+ *
+ * When used in combination with the softirq_entry tracepoint
+ * we can determine the softirq handler runtine.
+ */
+DEFINE_EVENT(softirq, softirq_exit,
+
+	TP_PROTO(unsigned int vec_nr),
+
+	TP_ARGS(vec_nr)
+);
+
+/**
+ * softirq_raise - called immediately when a softirq is raised
+ * @vec_nr:  softirq vector number
+ *
+ * When used in combination with the softirq_entry tracepoint
+ * we can determine the softirq raise to run latency.
+ */
+DEFINE_EVENT(softirq, softirq_raise,
+
+	TP_PROTO(unsigned int vec_nr),
+
+	TP_ARGS(vec_nr)
+);
+
+#endif /*  _TRACE_IRQ_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/jbd.h b/include/trace/events/jbd.h
new file mode 100644
index 00000000..aff64d82
--- /dev/null
+++ b/include/trace/events/jbd.h
@@ -0,0 +1,203 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM jbd
+
+#if !defined(_TRACE_JBD_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_JBD_H
+
+#include <linux/jbd.h>
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(jbd_checkpoint,
+
+	TP_PROTO(journal_t *journal, int result),
+
+	TP_ARGS(journal, result),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	int,	result			)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= journal->j_fs_dev->bd_dev;
+		__entry->result		= result;
+	),
+
+	TP_printk("dev %d,%d result %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->result)
+);
+
+DECLARE_EVENT_CLASS(jbd_commit,
+
+	TP_PROTO(journal_t *journal, transaction_t *commit_transaction),
+
+	TP_ARGS(journal, commit_transaction),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	char,	sync_commit		)
+		__field(	int,	transaction		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= journal->j_fs_dev->bd_dev;
+		__entry->sync_commit = commit_transaction->t_synchronous_commit;
+		__entry->transaction	= commit_transaction->t_tid;
+	),
+
+	TP_printk("dev %d,%d transaction %d sync %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->transaction, __entry->sync_commit)
+);
+
+DEFINE_EVENT(jbd_commit, jbd_start_commit,
+
+	TP_PROTO(journal_t *journal, transaction_t *commit_transaction),
+
+	TP_ARGS(journal, commit_transaction)
+);
+
+DEFINE_EVENT(jbd_commit, jbd_commit_locking,
+
+	TP_PROTO(journal_t *journal, transaction_t *commit_transaction),
+
+	TP_ARGS(journal, commit_transaction)
+);
+
+DEFINE_EVENT(jbd_commit, jbd_commit_flushing,
+
+	TP_PROTO(journal_t *journal, transaction_t *commit_transaction),
+
+	TP_ARGS(journal, commit_transaction)
+);
+
+DEFINE_EVENT(jbd_commit, jbd_commit_logging,
+
+	TP_PROTO(journal_t *journal, transaction_t *commit_transaction),
+
+	TP_ARGS(journal, commit_transaction)
+);
+
+TRACE_EVENT(jbd_drop_transaction,
+
+	TP_PROTO(journal_t *journal, transaction_t *commit_transaction),
+
+	TP_ARGS(journal, commit_transaction),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	char,	sync_commit		)
+		__field(	int,	transaction		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= journal->j_fs_dev->bd_dev;
+		__entry->sync_commit = commit_transaction->t_synchronous_commit;
+		__entry->transaction	= commit_transaction->t_tid;
+	),
+
+	TP_printk("dev %d,%d transaction %d sync %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->transaction, __entry->sync_commit)
+);
+
+TRACE_EVENT(jbd_end_commit,
+	TP_PROTO(journal_t *journal, transaction_t *commit_transaction),
+
+	TP_ARGS(journal, commit_transaction),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	char,	sync_commit		)
+		__field(	int,	transaction		)
+		__field(	int,	head			)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= journal->j_fs_dev->bd_dev;
+		__entry->sync_commit = commit_transaction->t_synchronous_commit;
+		__entry->transaction	= commit_transaction->t_tid;
+		__entry->head		= journal->j_tail_sequence;
+	),
+
+	TP_printk("dev %d,%d transaction %d sync %d head %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->transaction, __entry->sync_commit, __entry->head)
+);
+
+TRACE_EVENT(jbd_do_submit_data,
+	TP_PROTO(journal_t *journal, transaction_t *commit_transaction),
+
+	TP_ARGS(journal, commit_transaction),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	char,	sync_commit		)
+		__field(	int,	transaction		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= journal->j_fs_dev->bd_dev;
+		__entry->sync_commit = commit_transaction->t_synchronous_commit;
+		__entry->transaction	= commit_transaction->t_tid;
+	),
+
+	TP_printk("dev %d,%d transaction %d sync %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		   __entry->transaction, __entry->sync_commit)
+);
+
+TRACE_EVENT(jbd_cleanup_journal_tail,
+
+	TP_PROTO(journal_t *journal, tid_t first_tid,
+		 unsigned long block_nr, unsigned long freed),
+
+	TP_ARGS(journal, first_tid, block_nr, freed),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	tid_t,	tail_sequence		)
+		__field(	tid_t,	first_tid		)
+		__field(unsigned long,	block_nr		)
+		__field(unsigned long,	freed			)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= journal->j_fs_dev->bd_dev;
+		__entry->tail_sequence	= journal->j_tail_sequence;
+		__entry->first_tid	= first_tid;
+		__entry->block_nr	= block_nr;
+		__entry->freed		= freed;
+	),
+
+	TP_printk("dev %d,%d from %u to %u offset %lu freed %lu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->tail_sequence, __entry->first_tid,
+		  __entry->block_nr, __entry->freed)
+);
+
+TRACE_EVENT(jbd_update_superblock_end,
+	TP_PROTO(journal_t *journal, int wait),
+
+	TP_ARGS(journal, wait),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	int,	wait			)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= journal->j_fs_dev->bd_dev;
+		__entry->wait		= wait;
+	),
+
+	TP_printk("dev %d,%d wait %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		   __entry->wait)
+);
+
+#endif /* _TRACE_JBD_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/jbd2.h b/include/trace/events/jbd2.h
new file mode 100644
index 00000000..127993db
--- /dev/null
+++ b/include/trace/events/jbd2.h
@@ -0,0 +1,262 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM jbd2
+
+#if !defined(_TRACE_JBD2_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_JBD2_H
+
+#include <linux/jbd2.h>
+#include <linux/tracepoint.h>
+
+struct transaction_chp_stats_s;
+struct transaction_run_stats_s;
+
+TRACE_EVENT(jbd2_checkpoint,
+
+	TP_PROTO(journal_t *journal, int result),
+
+	TP_ARGS(journal, result),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	int,	result			)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= journal->j_fs_dev->bd_dev;
+		__entry->result		= result;
+	),
+
+	TP_printk("dev %d,%d result %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->result)
+);
+
+DECLARE_EVENT_CLASS(jbd2_commit,
+
+	TP_PROTO(journal_t *journal, transaction_t *commit_transaction),
+
+	TP_ARGS(journal, commit_transaction),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	char,	sync_commit		  )
+		__field(	int,	transaction		  )
+	),
+
+	TP_fast_assign(
+		__entry->dev		= journal->j_fs_dev->bd_dev;
+		__entry->sync_commit = commit_transaction->t_synchronous_commit;
+		__entry->transaction	= commit_transaction->t_tid;
+	),
+
+	TP_printk("dev %d,%d transaction %d sync %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->transaction, __entry->sync_commit)
+);
+
+DEFINE_EVENT(jbd2_commit, jbd2_start_commit,
+
+	TP_PROTO(journal_t *journal, transaction_t *commit_transaction),
+
+	TP_ARGS(journal, commit_transaction)
+);
+
+DEFINE_EVENT(jbd2_commit, jbd2_commit_locking,
+
+	TP_PROTO(journal_t *journal, transaction_t *commit_transaction),
+
+	TP_ARGS(journal, commit_transaction)
+);
+
+DEFINE_EVENT(jbd2_commit, jbd2_commit_flushing,
+
+	TP_PROTO(journal_t *journal, transaction_t *commit_transaction),
+
+	TP_ARGS(journal, commit_transaction)
+);
+
+DEFINE_EVENT(jbd2_commit, jbd2_commit_logging,
+
+	TP_PROTO(journal_t *journal, transaction_t *commit_transaction),
+
+	TP_ARGS(journal, commit_transaction)
+);
+
+DEFINE_EVENT(jbd2_commit, jbd2_drop_transaction,
+
+	TP_PROTO(journal_t *journal, transaction_t *commit_transaction),
+
+	TP_ARGS(journal, commit_transaction)
+);
+
+TRACE_EVENT(jbd2_end_commit,
+	TP_PROTO(journal_t *journal, transaction_t *commit_transaction),
+
+	TP_ARGS(journal, commit_transaction),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	char,	sync_commit		  )
+		__field(	int,	transaction		  )
+		__field(	int,	head		  	  )
+	),
+
+	TP_fast_assign(
+		__entry->dev		= journal->j_fs_dev->bd_dev;
+		__entry->sync_commit = commit_transaction->t_synchronous_commit;
+		__entry->transaction	= commit_transaction->t_tid;
+		__entry->head		= journal->j_tail_sequence;
+	),
+
+	TP_printk("dev %d,%d transaction %d sync %d head %d",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->transaction, __entry->sync_commit, __entry->head)
+);
+
+TRACE_EVENT(jbd2_submit_inode_data,
+	TP_PROTO(struct inode *inode),
+
+	TP_ARGS(inode),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+	),
+
+	TP_fast_assign(
+		__entry->dev	= inode->i_sb->s_dev;
+		__entry->ino	= inode->i_ino;
+	),
+
+	TP_printk("dev %d,%d ino %lu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  (unsigned long) __entry->ino)
+);
+
+TRACE_EVENT(jbd2_run_stats,
+	TP_PROTO(dev_t dev, unsigned long tid,
+		 struct transaction_run_stats_s *stats),
+
+	TP_ARGS(dev, tid, stats),
+
+	TP_STRUCT__entry(
+		__field(		dev_t,	dev		)
+		__field(	unsigned long,	tid		)
+		__field(	unsigned long,	wait		)
+		__field(	unsigned long,	running		)
+		__field(	unsigned long,	locked		)
+		__field(	unsigned long,	flushing	)
+		__field(	unsigned long,	logging		)
+		__field(		__u32,	handle_count	)
+		__field(		__u32,	blocks		)
+		__field(		__u32,	blocks_logged	)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= dev;
+		__entry->tid		= tid;
+		__entry->wait		= stats->rs_wait;
+		__entry->running	= stats->rs_running;
+		__entry->locked		= stats->rs_locked;
+		__entry->flushing	= stats->rs_flushing;
+		__entry->logging	= stats->rs_logging;
+		__entry->handle_count	= stats->rs_handle_count;
+		__entry->blocks		= stats->rs_blocks;
+		__entry->blocks_logged	= stats->rs_blocks_logged;
+	),
+
+	TP_printk("dev %d,%d tid %lu wait %u running %u locked %u flushing %u "
+		  "logging %u handle_count %u blocks %u blocks_logged %u",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->tid,
+		  jiffies_to_msecs(__entry->wait),
+		  jiffies_to_msecs(__entry->running),
+		  jiffies_to_msecs(__entry->locked),
+		  jiffies_to_msecs(__entry->flushing),
+		  jiffies_to_msecs(__entry->logging),
+		  __entry->handle_count, __entry->blocks,
+		  __entry->blocks_logged)
+);
+
+TRACE_EVENT(jbd2_checkpoint_stats,
+	TP_PROTO(dev_t dev, unsigned long tid,
+		 struct transaction_chp_stats_s *stats),
+
+	TP_ARGS(dev, tid, stats),
+
+	TP_STRUCT__entry(
+		__field(		dev_t,	dev		)
+		__field(	unsigned long,	tid		)
+		__field(	unsigned long,	chp_time	)
+		__field(		__u32,	forced_to_close	)
+		__field(		__u32,	written		)
+		__field(		__u32,	dropped		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= dev;
+		__entry->tid		= tid;
+		__entry->chp_time	= stats->cs_chp_time;
+		__entry->forced_to_close= stats->cs_forced_to_close;
+		__entry->written	= stats->cs_written;
+		__entry->dropped	= stats->cs_dropped;
+	),
+
+	TP_printk("dev %d,%d tid %lu chp_time %u forced_to_close %u "
+		  "written %u dropped %u",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->tid,
+		  jiffies_to_msecs(__entry->chp_time),
+		  __entry->forced_to_close, __entry->written, __entry->dropped)
+);
+
+TRACE_EVENT(jbd2_update_log_tail,
+
+	TP_PROTO(journal_t *journal, tid_t first_tid,
+		 unsigned long block_nr, unsigned long freed),
+
+	TP_ARGS(journal, first_tid, block_nr, freed),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	tid_t,	tail_sequence		)
+		__field(	tid_t,	first_tid		)
+		__field(unsigned long,	block_nr		)
+		__field(unsigned long,	freed			)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= journal->j_fs_dev->bd_dev;
+		__entry->tail_sequence	= journal->j_tail_sequence;
+		__entry->first_tid	= first_tid;
+		__entry->block_nr	= block_nr;
+		__entry->freed		= freed;
+	),
+
+	TP_printk("dev %d,%d from %u to %u offset %lu freed %lu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev),
+		  __entry->tail_sequence, __entry->first_tid,
+		  __entry->block_nr, __entry->freed)
+);
+
+TRACE_EVENT(jbd2_write_superblock,
+
+	TP_PROTO(journal_t *journal, int write_op),
+
+	TP_ARGS(journal, write_op),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,  dev			)
+		__field(	  int,  write_op		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= journal->j_fs_dev->bd_dev;
+		__entry->write_op	= write_op;
+	),
+
+	TP_printk("dev %d,%d write_op %x", MAJOR(__entry->dev),
+		  MINOR(__entry->dev), __entry->write_op)
+);
+
+#endif /* _TRACE_JBD2_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/kmem.h b/include/trace/events/kmem.h
new file mode 100644
index 00000000..5f889f16
--- /dev/null
+++ b/include/trace/events/kmem.h
@@ -0,0 +1,308 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM kmem
+
+#if !defined(_TRACE_KMEM_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_KMEM_H
+
+#include <linux/types.h>
+#include <linux/tracepoint.h>
+#include "gfpflags.h"
+
+DECLARE_EVENT_CLASS(kmem_alloc,
+
+	TP_PROTO(unsigned long call_site,
+		 const void *ptr,
+		 size_t bytes_req,
+		 size_t bytes_alloc,
+		 gfp_t gfp_flags),
+
+	TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,	call_site	)
+		__field(	const void *,	ptr		)
+		__field(	size_t,		bytes_req	)
+		__field(	size_t,		bytes_alloc	)
+		__field(	gfp_t,		gfp_flags	)
+	),
+
+	TP_fast_assign(
+		__entry->call_site	= call_site;
+		__entry->ptr		= ptr;
+		__entry->bytes_req	= bytes_req;
+		__entry->bytes_alloc	= bytes_alloc;
+		__entry->gfp_flags	= gfp_flags;
+	),
+
+	TP_printk("call_site=%lx ptr=%p bytes_req=%zu bytes_alloc=%zu gfp_flags=%s",
+		__entry->call_site,
+		__entry->ptr,
+		__entry->bytes_req,
+		__entry->bytes_alloc,
+		show_gfp_flags(__entry->gfp_flags))
+);
+
+DEFINE_EVENT(kmem_alloc, kmalloc,
+
+	TP_PROTO(unsigned long call_site, const void *ptr,
+		 size_t bytes_req, size_t bytes_alloc, gfp_t gfp_flags),
+
+	TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags)
+);
+
+DEFINE_EVENT(kmem_alloc, kmem_cache_alloc,
+
+	TP_PROTO(unsigned long call_site, const void *ptr,
+		 size_t bytes_req, size_t bytes_alloc, gfp_t gfp_flags),
+
+	TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags)
+);
+
+DECLARE_EVENT_CLASS(kmem_alloc_node,
+
+	TP_PROTO(unsigned long call_site,
+		 const void *ptr,
+		 size_t bytes_req,
+		 size_t bytes_alloc,
+		 gfp_t gfp_flags,
+		 int node),
+
+	TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags, node),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,	call_site	)
+		__field(	const void *,	ptr		)
+		__field(	size_t,		bytes_req	)
+		__field(	size_t,		bytes_alloc	)
+		__field(	gfp_t,		gfp_flags	)
+		__field(	int,		node		)
+	),
+
+	TP_fast_assign(
+		__entry->call_site	= call_site;
+		__entry->ptr		= ptr;
+		__entry->bytes_req	= bytes_req;
+		__entry->bytes_alloc	= bytes_alloc;
+		__entry->gfp_flags	= gfp_flags;
+		__entry->node		= node;
+	),
+
+	TP_printk("call_site=%lx ptr=%p bytes_req=%zu bytes_alloc=%zu gfp_flags=%s node=%d",
+		__entry->call_site,
+		__entry->ptr,
+		__entry->bytes_req,
+		__entry->bytes_alloc,
+		show_gfp_flags(__entry->gfp_flags),
+		__entry->node)
+);
+
+DEFINE_EVENT(kmem_alloc_node, kmalloc_node,
+
+	TP_PROTO(unsigned long call_site, const void *ptr,
+		 size_t bytes_req, size_t bytes_alloc,
+		 gfp_t gfp_flags, int node),
+
+	TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags, node)
+);
+
+DEFINE_EVENT(kmem_alloc_node, kmem_cache_alloc_node,
+
+	TP_PROTO(unsigned long call_site, const void *ptr,
+		 size_t bytes_req, size_t bytes_alloc,
+		 gfp_t gfp_flags, int node),
+
+	TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags, node)
+);
+
+DECLARE_EVENT_CLASS(kmem_free,
+
+	TP_PROTO(unsigned long call_site, const void *ptr),
+
+	TP_ARGS(call_site, ptr),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,	call_site	)
+		__field(	const void *,	ptr		)
+	),
+
+	TP_fast_assign(
+		__entry->call_site	= call_site;
+		__entry->ptr		= ptr;
+	),
+
+	TP_printk("call_site=%lx ptr=%p", __entry->call_site, __entry->ptr)
+);
+
+DEFINE_EVENT(kmem_free, kfree,
+
+	TP_PROTO(unsigned long call_site, const void *ptr),
+
+	TP_ARGS(call_site, ptr)
+);
+
+DEFINE_EVENT(kmem_free, kmem_cache_free,
+
+	TP_PROTO(unsigned long call_site, const void *ptr),
+
+	TP_ARGS(call_site, ptr)
+);
+
+TRACE_EVENT(mm_page_free,
+
+	TP_PROTO(struct page *page, unsigned int order),
+
+	TP_ARGS(page, order),
+
+	TP_STRUCT__entry(
+		__field(	struct page *,	page		)
+		__field(	unsigned int,	order		)
+	),
+
+	TP_fast_assign(
+		__entry->page		= page;
+		__entry->order		= order;
+	),
+
+	TP_printk("page=%p pfn=%lu order=%d",
+			__entry->page,
+			page_to_pfn(__entry->page),
+			__entry->order)
+);
+
+TRACE_EVENT(mm_page_free_batched,
+
+	TP_PROTO(struct page *page, int cold),
+
+	TP_ARGS(page, cold),
+
+	TP_STRUCT__entry(
+		__field(	struct page *,	page		)
+		__field(	int,		cold		)
+	),
+
+	TP_fast_assign(
+		__entry->page		= page;
+		__entry->cold		= cold;
+	),
+
+	TP_printk("page=%p pfn=%lu order=0 cold=%d",
+			__entry->page,
+			page_to_pfn(__entry->page),
+			__entry->cold)
+);
+
+TRACE_EVENT(mm_page_alloc,
+
+	TP_PROTO(struct page *page, unsigned int order,
+			gfp_t gfp_flags, int migratetype),
+
+	TP_ARGS(page, order, gfp_flags, migratetype),
+
+	TP_STRUCT__entry(
+		__field(	struct page *,	page		)
+		__field(	unsigned int,	order		)
+		__field(	gfp_t,		gfp_flags	)
+		__field(	int,		migratetype	)
+	),
+
+	TP_fast_assign(
+		__entry->page		= page;
+		__entry->order		= order;
+		__entry->gfp_flags	= gfp_flags;
+		__entry->migratetype	= migratetype;
+	),
+
+	TP_printk("page=%p pfn=%lu order=%d migratetype=%d gfp_flags=%s",
+		__entry->page,
+		page_to_pfn(__entry->page),
+		__entry->order,
+		__entry->migratetype,
+		show_gfp_flags(__entry->gfp_flags))
+);
+
+DECLARE_EVENT_CLASS(mm_page,
+
+	TP_PROTO(struct page *page, unsigned int order, int migratetype),
+
+	TP_ARGS(page, order, migratetype),
+
+	TP_STRUCT__entry(
+		__field(	struct page *,	page		)
+		__field(	unsigned int,	order		)
+		__field(	int,		migratetype	)
+	),
+
+	TP_fast_assign(
+		__entry->page		= page;
+		__entry->order		= order;
+		__entry->migratetype	= migratetype;
+	),
+
+	TP_printk("page=%p pfn=%lu order=%u migratetype=%d percpu_refill=%d",
+		__entry->page,
+		page_to_pfn(__entry->page),
+		__entry->order,
+		__entry->migratetype,
+		__entry->order == 0)
+);
+
+DEFINE_EVENT(mm_page, mm_page_alloc_zone_locked,
+
+	TP_PROTO(struct page *page, unsigned int order, int migratetype),
+
+	TP_ARGS(page, order, migratetype)
+);
+
+DEFINE_EVENT_PRINT(mm_page, mm_page_pcpu_drain,
+
+	TP_PROTO(struct page *page, unsigned int order, int migratetype),
+
+	TP_ARGS(page, order, migratetype),
+
+	TP_printk("page=%p pfn=%lu order=%d migratetype=%d",
+		__entry->page, page_to_pfn(__entry->page),
+		__entry->order, __entry->migratetype)
+);
+
+TRACE_EVENT(mm_page_alloc_extfrag,
+
+	TP_PROTO(struct page *page,
+			int alloc_order, int fallback_order,
+			int alloc_migratetype, int fallback_migratetype),
+
+	TP_ARGS(page,
+		alloc_order, fallback_order,
+		alloc_migratetype, fallback_migratetype),
+
+	TP_STRUCT__entry(
+		__field(	struct page *,	page			)
+		__field(	int,		alloc_order		)
+		__field(	int,		fallback_order		)
+		__field(	int,		alloc_migratetype	)
+		__field(	int,		fallback_migratetype	)
+	),
+
+	TP_fast_assign(
+		__entry->page			= page;
+		__entry->alloc_order		= alloc_order;
+		__entry->fallback_order		= fallback_order;
+		__entry->alloc_migratetype	= alloc_migratetype;
+		__entry->fallback_migratetype	= fallback_migratetype;
+	),
+
+	TP_printk("page=%p pfn=%lu alloc_order=%d fallback_order=%d pageblock_order=%d alloc_migratetype=%d fallback_migratetype=%d fragmenting=%d change_ownership=%d",
+		__entry->page,
+		page_to_pfn(__entry->page),
+		__entry->alloc_order,
+		__entry->fallback_order,
+		pageblock_order,
+		__entry->alloc_migratetype,
+		__entry->fallback_migratetype,
+		__entry->fallback_order < pageblock_order,
+		__entry->alloc_migratetype == __entry->fallback_migratetype)
+);
+
+#endif /* _TRACE_KMEM_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/kvm.h b/include/trace/events/kvm.h
new file mode 100644
index 00000000..46e3cd8e
--- /dev/null
+++ b/include/trace/events/kvm.h
@@ -0,0 +1,312 @@
+#if !defined(_TRACE_KVM_MAIN_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_KVM_MAIN_H
+
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM kvm
+
+#define ERSN(x) { KVM_EXIT_##x, "KVM_EXIT_" #x }
+
+#define kvm_trace_exit_reason						\
+	ERSN(UNKNOWN), ERSN(EXCEPTION), ERSN(IO), ERSN(HYPERCALL),	\
+	ERSN(DEBUG), ERSN(HLT), ERSN(MMIO), ERSN(IRQ_WINDOW_OPEN),	\
+	ERSN(SHUTDOWN), ERSN(FAIL_ENTRY), ERSN(INTR), ERSN(SET_TPR),	\
+	ERSN(TPR_ACCESS), ERSN(S390_SIEIC), ERSN(S390_RESET), ERSN(DCR),\
+	ERSN(NMI), ERSN(INTERNAL_ERROR), ERSN(OSI)
+
+TRACE_EVENT(kvm_userspace_exit,
+	    TP_PROTO(__u32 reason, int errno),
+	    TP_ARGS(reason, errno),
+
+	TP_STRUCT__entry(
+		__field(	__u32,		reason		)
+		__field(	int,		errno		)
+	),
+
+	TP_fast_assign(
+		__entry->reason		= reason;
+		__entry->errno		= errno;
+	),
+
+	TP_printk("reason %s (%d)",
+		  __entry->errno < 0 ?
+		  (__entry->errno == -EINTR ? "restart" : "error") :
+		  __print_symbolic(__entry->reason, kvm_trace_exit_reason),
+		  __entry->errno < 0 ? -__entry->errno : __entry->reason)
+);
+
+#if defined(__KVM_HAVE_IOAPIC)
+TRACE_EVENT(kvm_set_irq,
+	TP_PROTO(unsigned int gsi, int level, int irq_source_id),
+	TP_ARGS(gsi, level, irq_source_id),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int,	gsi		)
+		__field(	int,		level		)
+		__field(	int,		irq_source_id	)
+	),
+
+	TP_fast_assign(
+		__entry->gsi		= gsi;
+		__entry->level		= level;
+		__entry->irq_source_id	= irq_source_id;
+	),
+
+	TP_printk("gsi %u level %d source %d",
+		  __entry->gsi, __entry->level, __entry->irq_source_id)
+);
+
+#define kvm_deliver_mode		\
+	{0x0, "Fixed"},			\
+	{0x1, "LowPrio"},		\
+	{0x2, "SMI"},			\
+	{0x3, "Res3"},			\
+	{0x4, "NMI"},			\
+	{0x5, "INIT"},			\
+	{0x6, "SIPI"},			\
+	{0x7, "ExtINT"}
+
+TRACE_EVENT(kvm_ioapic_set_irq,
+	    TP_PROTO(__u64 e, int pin, bool coalesced),
+	    TP_ARGS(e, pin, coalesced),
+
+	TP_STRUCT__entry(
+		__field(	__u64,		e		)
+		__field(	int,		pin		)
+		__field(	bool,		coalesced	)
+	),
+
+	TP_fast_assign(
+		__entry->e		= e;
+		__entry->pin		= pin;
+		__entry->coalesced	= coalesced;
+	),
+
+	TP_printk("pin %u dst %x vec=%u (%s|%s|%s%s)%s",
+		  __entry->pin, (u8)(__entry->e >> 56), (u8)__entry->e,
+		  __print_symbolic((__entry->e >> 8 & 0x7), kvm_deliver_mode),
+		  (__entry->e & (1<<11)) ? "logical" : "physical",
+		  (__entry->e & (1<<15)) ? "level" : "edge",
+		  (__entry->e & (1<<16)) ? "|masked" : "",
+		  __entry->coalesced ? " (coalesced)" : "")
+);
+
+TRACE_EVENT(kvm_msi_set_irq,
+	    TP_PROTO(__u64 address, __u64 data),
+	    TP_ARGS(address, data),
+
+	TP_STRUCT__entry(
+		__field(	__u64,		address		)
+		__field(	__u64,		data		)
+	),
+
+	TP_fast_assign(
+		__entry->address	= address;
+		__entry->data		= data;
+	),
+
+	TP_printk("dst %u vec %x (%s|%s|%s%s)",
+		  (u8)(__entry->address >> 12), (u8)__entry->data,
+		  __print_symbolic((__entry->data >> 8 & 0x7), kvm_deliver_mode),
+		  (__entry->address & (1<<2)) ? "logical" : "physical",
+		  (__entry->data & (1<<15)) ? "level" : "edge",
+		  (__entry->address & (1<<3)) ? "|rh" : "")
+);
+
+#define kvm_irqchips						\
+	{KVM_IRQCHIP_PIC_MASTER,	"PIC master"},		\
+	{KVM_IRQCHIP_PIC_SLAVE,		"PIC slave"},		\
+	{KVM_IRQCHIP_IOAPIC,		"IOAPIC"}
+
+TRACE_EVENT(kvm_ack_irq,
+	TP_PROTO(unsigned int irqchip, unsigned int pin),
+	TP_ARGS(irqchip, pin),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int,	irqchip		)
+		__field(	unsigned int,	pin		)
+	),
+
+	TP_fast_assign(
+		__entry->irqchip	= irqchip;
+		__entry->pin		= pin;
+	),
+
+	TP_printk("irqchip %s pin %u",
+		  __print_symbolic(__entry->irqchip, kvm_irqchips),
+		 __entry->pin)
+);
+
+
+
+#endif /* defined(__KVM_HAVE_IOAPIC) */
+
+#define KVM_TRACE_MMIO_READ_UNSATISFIED 0
+#define KVM_TRACE_MMIO_READ 1
+#define KVM_TRACE_MMIO_WRITE 2
+
+#define kvm_trace_symbol_mmio \
+	{ KVM_TRACE_MMIO_READ_UNSATISFIED, "unsatisfied-read" }, \
+	{ KVM_TRACE_MMIO_READ, "read" }, \
+	{ KVM_TRACE_MMIO_WRITE, "write" }
+
+TRACE_EVENT(kvm_mmio,
+	TP_PROTO(int type, int len, u64 gpa, u64 val),
+	TP_ARGS(type, len, gpa, val),
+
+	TP_STRUCT__entry(
+		__field(	u32,	type		)
+		__field(	u32,	len		)
+		__field(	u64,	gpa		)
+		__field(	u64,	val		)
+	),
+
+	TP_fast_assign(
+		__entry->type		= type;
+		__entry->len		= len;
+		__entry->gpa		= gpa;
+		__entry->val		= val;
+	),
+
+	TP_printk("mmio %s len %u gpa 0x%llx val 0x%llx",
+		  __print_symbolic(__entry->type, kvm_trace_symbol_mmio),
+		  __entry->len, __entry->gpa, __entry->val)
+);
+
+#define kvm_fpu_load_symbol	\
+	{0, "unload"},		\
+	{1, "load"}
+
+TRACE_EVENT(kvm_fpu,
+	TP_PROTO(int load),
+	TP_ARGS(load),
+
+	TP_STRUCT__entry(
+		__field(	u32,	        load		)
+	),
+
+	TP_fast_assign(
+		__entry->load		= load;
+	),
+
+	TP_printk("%s", __print_symbolic(__entry->load, kvm_fpu_load_symbol))
+);
+
+TRACE_EVENT(kvm_age_page,
+	TP_PROTO(ulong hva, struct kvm_memory_slot *slot, int ref),
+	TP_ARGS(hva, slot, ref),
+
+	TP_STRUCT__entry(
+		__field(	u64,	hva		)
+		__field(	u64,	gfn		)
+		__field(	u8,	referenced	)
+	),
+
+	TP_fast_assign(
+		__entry->hva		= hva;
+		__entry->gfn		=
+		  slot->base_gfn + ((hva - slot->userspace_addr) >> PAGE_SHIFT);
+		__entry->referenced	= ref;
+	),
+
+	TP_printk("hva %llx gfn %llx %s",
+		  __entry->hva, __entry->gfn,
+		  __entry->referenced ? "YOUNG" : "OLD")
+);
+
+#ifdef CONFIG_KVM_ASYNC_PF
+DECLARE_EVENT_CLASS(kvm_async_get_page_class,
+
+	TP_PROTO(u64 gva, u64 gfn),
+
+	TP_ARGS(gva, gfn),
+
+	TP_STRUCT__entry(
+		__field(__u64, gva)
+		__field(u64, gfn)
+	),
+
+	TP_fast_assign(
+		__entry->gva = gva;
+		__entry->gfn = gfn;
+	),
+
+	TP_printk("gva = %#llx, gfn = %#llx", __entry->gva, __entry->gfn)
+);
+
+DEFINE_EVENT(kvm_async_get_page_class, kvm_try_async_get_page,
+
+	TP_PROTO(u64 gva, u64 gfn),
+
+	TP_ARGS(gva, gfn)
+);
+
+DEFINE_EVENT(kvm_async_get_page_class, kvm_async_pf_doublefault,
+
+	TP_PROTO(u64 gva, u64 gfn),
+
+	TP_ARGS(gva, gfn)
+);
+
+DECLARE_EVENT_CLASS(kvm_async_pf_nopresent_ready,
+
+	TP_PROTO(u64 token, u64 gva),
+
+	TP_ARGS(token, gva),
+
+	TP_STRUCT__entry(
+		__field(__u64, token)
+		__field(__u64, gva)
+	),
+
+	TP_fast_assign(
+		__entry->token = token;
+		__entry->gva = gva;
+	),
+
+	TP_printk("token %#llx gva %#llx", __entry->token, __entry->gva)
+
+);
+
+DEFINE_EVENT(kvm_async_pf_nopresent_ready, kvm_async_pf_not_present,
+
+	TP_PROTO(u64 token, u64 gva),
+
+	TP_ARGS(token, gva)
+);
+
+DEFINE_EVENT(kvm_async_pf_nopresent_ready, kvm_async_pf_ready,
+
+	TP_PROTO(u64 token, u64 gva),
+
+	TP_ARGS(token, gva)
+);
+
+TRACE_EVENT(
+	kvm_async_pf_completed,
+	TP_PROTO(unsigned long address, struct page *page, u64 gva),
+	TP_ARGS(address, page, gva),
+
+	TP_STRUCT__entry(
+		__field(unsigned long, address)
+		__field(pfn_t, pfn)
+		__field(u64, gva)
+		),
+
+	TP_fast_assign(
+		__entry->address = address;
+		__entry->pfn = page ? page_to_pfn(page) : 0;
+		__entry->gva = gva;
+		),
+
+	TP_printk("gva %#llx address %#lx pfn %#llx",  __entry->gva,
+		  __entry->address, __entry->pfn)
+);
+
+#endif
+
+#endif /* _TRACE_KVM_MAIN_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/lock.h b/include/trace/events/lock.h
new file mode 100644
index 00000000..2821b86d
--- /dev/null
+++ b/include/trace/events/lock.h
@@ -0,0 +1,86 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM lock
+
+#if !defined(_TRACE_LOCK_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_LOCK_H
+
+#include <linux/lockdep.h>
+#include <linux/tracepoint.h>
+
+#ifdef CONFIG_LOCKDEP
+
+TRACE_EVENT(lock_acquire,
+
+	TP_PROTO(struct lockdep_map *lock, unsigned int subclass,
+		int trylock, int read, int check,
+		struct lockdep_map *next_lock, unsigned long ip),
+
+	TP_ARGS(lock, subclass, trylock, read, check, next_lock, ip),
+
+	TP_STRUCT__entry(
+		__field(unsigned int, flags)
+		__string(name, lock->name)
+		__field(void *, lockdep_addr)
+	),
+
+	TP_fast_assign(
+		__entry->flags = (trylock ? 1 : 0) | (read ? 2 : 0);
+		__assign_str(name, lock->name);
+		__entry->lockdep_addr = lock;
+	),
+
+	TP_printk("%p %s%s%s", __entry->lockdep_addr,
+		  (__entry->flags & 1) ? "try " : "",
+		  (__entry->flags & 2) ? "read " : "",
+		  __get_str(name))
+);
+
+DECLARE_EVENT_CLASS(lock,
+
+	TP_PROTO(struct lockdep_map *lock, unsigned long ip),
+
+	TP_ARGS(lock, ip),
+
+	TP_STRUCT__entry(
+		__string(	name, 	lock->name	)
+		__field(	void *, lockdep_addr	)
+	),
+
+	TP_fast_assign(
+		__assign_str(name, lock->name);
+		__entry->lockdep_addr = lock;
+	),
+
+	TP_printk("%p %s",  __entry->lockdep_addr, __get_str(name))
+);
+
+DEFINE_EVENT(lock, lock_release,
+
+	TP_PROTO(struct lockdep_map *lock, unsigned long ip),
+
+	TP_ARGS(lock, ip)
+);
+
+#ifdef CONFIG_LOCK_STAT
+
+DEFINE_EVENT(lock, lock_contended,
+
+	TP_PROTO(struct lockdep_map *lock, unsigned long ip),
+
+	TP_ARGS(lock, ip)
+);
+
+DEFINE_EVENT(lock, lock_acquired,
+
+	TP_PROTO(struct lockdep_map *lock, unsigned long ip),
+
+	TP_ARGS(lock, ip)
+);
+
+#endif
+#endif
+
+#endif /* _TRACE_LOCK_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/mce.h b/include/trace/events/mce.h
new file mode 100644
index 00000000..4cbbcef6
--- /dev/null
+++ b/include/trace/events/mce.h
@@ -0,0 +1,69 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM mce
+
+#if !defined(_TRACE_MCE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_MCE_H
+
+#include <linux/ktime.h>
+#include <linux/tracepoint.h>
+#include <asm/mce.h>
+
+TRACE_EVENT(mce_record,
+
+	TP_PROTO(struct mce *m),
+
+	TP_ARGS(m),
+
+	TP_STRUCT__entry(
+		__field(	u64,		mcgcap		)
+		__field(	u64,		mcgstatus	)
+		__field(	u64,		status		)
+		__field(	u64,		addr		)
+		__field(	u64,		misc		)
+		__field(	u64,		ip		)
+		__field(	u64,		tsc		)
+		__field(	u64,		walltime	)
+		__field(	u32,		cpu		)
+		__field(	u32,		cpuid		)
+		__field(	u32,		apicid		)
+		__field(	u32,		socketid	)
+		__field(	u8,		cs		)
+		__field(	u8,		bank		)
+		__field(	u8,		cpuvendor	)
+	),
+
+	TP_fast_assign(
+		__entry->mcgcap		= m->mcgcap;
+		__entry->mcgstatus	= m->mcgstatus;
+		__entry->status		= m->status;
+		__entry->addr		= m->addr;
+		__entry->misc		= m->misc;
+		__entry->ip		= m->ip;
+		__entry->tsc		= m->tsc;
+		__entry->walltime	= m->time;
+		__entry->cpu		= m->extcpu;
+		__entry->cpuid		= m->cpuid;
+		__entry->apicid		= m->apicid;
+		__entry->socketid	= m->socketid;
+		__entry->cs		= m->cs;
+		__entry->bank		= m->bank;
+		__entry->cpuvendor	= m->cpuvendor;
+	),
+
+	TP_printk("CPU: %d, MCGc/s: %llx/%llx, MC%d: %016Lx, ADDR/MISC: %016Lx/%016Lx, RIP: %02x:<%016Lx>, TSC: %llx, PROCESSOR: %u:%x, TIME: %llu, SOCKET: %u, APIC: %x",
+		__entry->cpu,
+		__entry->mcgcap, __entry->mcgstatus,
+		__entry->bank, __entry->status,
+		__entry->addr, __entry->misc,
+		__entry->cs, __entry->ip,
+		__entry->tsc,
+		__entry->cpuvendor, __entry->cpuid,
+		__entry->walltime,
+		__entry->socketid,
+		__entry->apicid)
+);
+
+#endif /* _TRACE_MCE_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/module.h b/include/trace/events/module.h
new file mode 100644
index 00000000..16193273
--- /dev/null
+++ b/include/trace/events/module.h
@@ -0,0 +1,131 @@
+/*
+ * Because linux/module.h has tracepoints in the header, and ftrace.h
+ * used to include this file, define_trace.h includes linux/module.h
+ * But we do not want the module.h to override the TRACE_SYSTEM macro
+ * variable that define_trace.h is processing, so we only set it
+ * when module events are being processed, which would happen when
+ * CREATE_TRACE_POINTS is defined.
+ */
+#ifdef CREATE_TRACE_POINTS
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM module
+#endif
+
+#if !defined(_TRACE_MODULE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_MODULE_H
+
+#include <linux/tracepoint.h>
+
+#ifdef CONFIG_MODULES
+
+struct module;
+
+#define show_module_flags(flags) __print_flags(flags, "",	\
+	{ (1UL << TAINT_PROPRIETARY_MODULE),	"P" },		\
+	{ (1UL << TAINT_FORCED_MODULE),		"F" },		\
+	{ (1UL << TAINT_CRAP),			"C" })
+
+TRACE_EVENT(module_load,
+
+	TP_PROTO(struct module *mod),
+
+	TP_ARGS(mod),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int,	taints		)
+		__string(	name,		mod->name	)
+	),
+
+	TP_fast_assign(
+		__entry->taints = mod->taints;
+		__assign_str(name, mod->name);
+	),
+
+	TP_printk("%s %s", __get_str(name), show_module_flags(__entry->taints))
+);
+
+TRACE_EVENT(module_free,
+
+	TP_PROTO(struct module *mod),
+
+	TP_ARGS(mod),
+
+	TP_STRUCT__entry(
+		__string(	name,		mod->name	)
+	),
+
+	TP_fast_assign(
+		__assign_str(name, mod->name);
+	),
+
+	TP_printk("%s", __get_str(name))
+);
+
+#ifdef CONFIG_MODULE_UNLOAD
+/* trace_module_get/put are only used if CONFIG_MODULE_UNLOAD is defined */
+
+DECLARE_EVENT_CLASS(module_refcnt,
+
+	TP_PROTO(struct module *mod, unsigned long ip),
+
+	TP_ARGS(mod, ip),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,	ip		)
+		__field(	int,		refcnt		)
+		__string(	name,		mod->name	)
+	),
+
+	TP_fast_assign(
+		__entry->ip	= ip;
+		__entry->refcnt	= __this_cpu_read(mod->refptr->incs) + __this_cpu_read(mod->refptr->decs);
+		__assign_str(name, mod->name);
+	),
+
+	TP_printk("%s call_site=%pf refcnt=%d",
+		  __get_str(name), (void *)__entry->ip, __entry->refcnt)
+);
+
+DEFINE_EVENT(module_refcnt, module_get,
+
+	TP_PROTO(struct module *mod, unsigned long ip),
+
+	TP_ARGS(mod, ip)
+);
+
+DEFINE_EVENT(module_refcnt, module_put,
+
+	TP_PROTO(struct module *mod, unsigned long ip),
+
+	TP_ARGS(mod, ip)
+);
+#endif /* CONFIG_MODULE_UNLOAD */
+
+TRACE_EVENT(module_request,
+
+	TP_PROTO(char *name, bool wait, unsigned long ip),
+
+	TP_ARGS(name, wait, ip),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,	ip		)
+		__field(	bool,		wait		)
+		__string(	name,		name		)
+	),
+
+	TP_fast_assign(
+		__entry->ip	= ip;
+		__entry->wait	= wait;
+		__assign_str(name, name);
+	),
+
+	TP_printk("%s wait=%d call_site=%pf",
+		  __get_str(name), (int)__entry->wait, (void *)__entry->ip)
+);
+
+#endif /* CONFIG_MODULES */
+
+#endif /* _TRACE_MODULE_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/napi.h b/include/trace/events/napi.h
new file mode 100644
index 00000000..8fe1e93f
--- /dev/null
+++ b/include/trace/events/napi.h
@@ -0,0 +1,38 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM napi
+
+#if !defined(_TRACE_NAPI_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_NAPI_H_
+
+#include <linux/netdevice.h>
+#include <linux/tracepoint.h>
+#include <linux/ftrace.h>
+
+#define NO_DEV "(no_device)"
+
+TRACE_EVENT(napi_poll,
+
+	TP_PROTO(struct napi_struct *napi),
+
+	TP_ARGS(napi),
+
+	TP_STRUCT__entry(
+		__field(	struct napi_struct *,	napi)
+		__string(	dev_name, napi->dev ? napi->dev->name : NO_DEV)
+	),
+
+	TP_fast_assign(
+		__entry->napi = napi;
+		__assign_str(dev_name, napi->dev ? napi->dev->name : NO_DEV);
+	),
+
+	TP_printk("napi poll on napi struct %p for device %s",
+		__entry->napi, __get_str(dev_name))
+);
+
+#undef NO_DEV
+
+#endif /* _TRACE_NAPI_H_ */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/net.h b/include/trace/events/net.h
new file mode 100644
index 00000000..f99645d0
--- /dev/null
+++ b/include/trace/events/net.h
@@ -0,0 +1,84 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM net
+
+#if !defined(_TRACE_NET_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_NET_H
+
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/ip.h>
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(net_dev_xmit,
+
+	TP_PROTO(struct sk_buff *skb,
+		 int rc,
+		 struct net_device *dev,
+		 unsigned int skb_len),
+
+	TP_ARGS(skb, rc, dev, skb_len),
+
+	TP_STRUCT__entry(
+		__field(	void *,		skbaddr		)
+		__field(	unsigned int,	len		)
+		__field(	int,		rc		)
+		__string(	name,		dev->name	)
+	),
+
+	TP_fast_assign(
+		__entry->skbaddr = skb;
+		__entry->len = skb_len;
+		__entry->rc = rc;
+		__assign_str(name, dev->name);
+	),
+
+	TP_printk("dev=%s skbaddr=%p len=%u rc=%d",
+		__get_str(name), __entry->skbaddr, __entry->len, __entry->rc)
+);
+
+DECLARE_EVENT_CLASS(net_dev_template,
+
+	TP_PROTO(struct sk_buff *skb),
+
+	TP_ARGS(skb),
+
+	TP_STRUCT__entry(
+		__field(	void *,		skbaddr		)
+		__field(	unsigned int,	len		)
+		__string(	name,		skb->dev->name	)
+	),
+
+	TP_fast_assign(
+		__entry->skbaddr = skb;
+		__entry->len = skb->len;
+		__assign_str(name, skb->dev->name);
+	),
+
+	TP_printk("dev=%s skbaddr=%p len=%u",
+		__get_str(name), __entry->skbaddr, __entry->len)
+)
+
+DEFINE_EVENT(net_dev_template, net_dev_queue,
+
+	TP_PROTO(struct sk_buff *skb),
+
+	TP_ARGS(skb)
+);
+
+DEFINE_EVENT(net_dev_template, netif_receive_skb,
+
+	TP_PROTO(struct sk_buff *skb),
+
+	TP_ARGS(skb)
+);
+
+DEFINE_EVENT(net_dev_template, netif_rx,
+
+	TP_PROTO(struct sk_buff *skb),
+
+	TP_ARGS(skb)
+);
+#endif /* _TRACE_NET_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/oom.h b/include/trace/events/oom.h
new file mode 100644
index 00000000..dd4ba3b9
--- /dev/null
+++ b/include/trace/events/oom.h
@@ -0,0 +1,33 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM oom
+
+#if !defined(_TRACE_OOM_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_OOM_H
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(oom_score_adj_update,
+
+	TP_PROTO(struct task_struct *task),
+
+	TP_ARGS(task),
+
+	TP_STRUCT__entry(
+		__field(	pid_t,	pid)
+		__array(	char,	comm,	TASK_COMM_LEN )
+		__field(	 int,	oom_score_adj)
+	),
+
+	TP_fast_assign(
+		__entry->pid = task->pid;
+		memcpy(__entry->comm, task->comm, TASK_COMM_LEN);
+		__entry->oom_score_adj = task->signal->oom_score_adj;
+	),
+
+	TP_printk("pid=%d comm=%s oom_score_adj=%d",
+		__entry->pid, __entry->comm, __entry->oom_score_adj)
+);
+
+#endif
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/power.h b/include/trace/events/power.h
new file mode 100644
index 00000000..243c677c
--- /dev/null
+++ b/include/trace/events/power.h
@@ -0,0 +1,294 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM power
+
+#if !defined(_TRACE_POWER_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_POWER_H
+
+#include <linux/ktime.h>
+#include <linux/tracepoint.h>
+
+DECLARE_EVENT_CLASS(cpu,
+
+	TP_PROTO(unsigned int state, unsigned int cpu_id),
+
+	TP_ARGS(state, cpu_id),
+
+	TP_STRUCT__entry(
+		__field(	u32,		state		)
+		__field(	u32,		cpu_id		)
+	),
+
+	TP_fast_assign(
+		__entry->state = state;
+		__entry->cpu_id = cpu_id;
+	),
+
+	TP_printk("state=%lu cpu_id=%lu", (unsigned long)__entry->state,
+		  (unsigned long)__entry->cpu_id)
+);
+
+DEFINE_EVENT(cpu, cpu_idle,
+
+	TP_PROTO(unsigned int state, unsigned int cpu_id),
+
+	TP_ARGS(state, cpu_id)
+);
+
+/* This file can get included multiple times, TRACE_HEADER_MULTI_READ at top */
+#ifndef _PWR_EVENT_AVOID_DOUBLE_DEFINING
+#define _PWR_EVENT_AVOID_DOUBLE_DEFINING
+
+#define PWR_EVENT_EXIT -1
+#endif
+
+DEFINE_EVENT(cpu, cpu_frequency,
+
+	TP_PROTO(unsigned int frequency, unsigned int cpu_id),
+
+	TP_ARGS(frequency, cpu_id)
+);
+
+TRACE_EVENT(machine_suspend,
+
+	TP_PROTO(unsigned int state),
+
+	TP_ARGS(state),
+
+	TP_STRUCT__entry(
+		__field(	u32,		state		)
+	),
+
+	TP_fast_assign(
+		__entry->state = state;
+	),
+
+	TP_printk("state=%lu", (unsigned long)__entry->state)
+);
+
+DECLARE_EVENT_CLASS(wakeup_source,
+
+	TP_PROTO(const char *name, unsigned int state),
+
+	TP_ARGS(name, state),
+
+	TP_STRUCT__entry(
+		__string(       name,           name            )
+		__field(        u64,            state           )
+	),
+
+	TP_fast_assign(
+		__assign_str(name, name);
+		__entry->state = state;
+	),
+
+	TP_printk("%s state=0x%lx", __get_str(name),
+		(unsigned long)__entry->state)
+);
+
+DEFINE_EVENT(wakeup_source, wakeup_source_activate,
+
+	TP_PROTO(const char *name, unsigned int state),
+
+	TP_ARGS(name, state)
+);
+
+DEFINE_EVENT(wakeup_source, wakeup_source_deactivate,
+
+	TP_PROTO(const char *name, unsigned int state),
+
+	TP_ARGS(name, state)
+);
+
+#ifdef CONFIG_EVENT_POWER_TRACING_DEPRECATED
+
+/*
+ * The power events are used for cpuidle & suspend (power_start, power_end)
+ *  and for cpufreq (power_frequency)
+ */
+DECLARE_EVENT_CLASS(power,
+
+	TP_PROTO(unsigned int type, unsigned int state, unsigned int cpu_id),
+
+	TP_ARGS(type, state, cpu_id),
+
+	TP_STRUCT__entry(
+		__field(	u64,		type		)
+		__field(	u64,		state		)
+		__field(	u64,		cpu_id		)
+	),
+
+	TP_fast_assign(
+		__entry->type = type;
+		__entry->state = state;
+		__entry->cpu_id = cpu_id;
+	),
+
+	TP_printk("type=%lu state=%lu cpu_id=%lu", (unsigned long)__entry->type,
+		(unsigned long)__entry->state, (unsigned long)__entry->cpu_id)
+);
+
+DEFINE_EVENT(power, power_start,
+
+	TP_PROTO(unsigned int type, unsigned int state, unsigned int cpu_id),
+
+	TP_ARGS(type, state, cpu_id)
+);
+
+DEFINE_EVENT(power, power_frequency,
+
+	TP_PROTO(unsigned int type, unsigned int state, unsigned int cpu_id),
+
+	TP_ARGS(type, state, cpu_id)
+);
+
+TRACE_EVENT(power_end,
+
+	TP_PROTO(unsigned int cpu_id),
+
+	TP_ARGS(cpu_id),
+
+	TP_STRUCT__entry(
+		__field(	u64,		cpu_id		)
+	),
+
+	TP_fast_assign(
+		__entry->cpu_id = cpu_id;
+	),
+
+	TP_printk("cpu_id=%lu", (unsigned long)__entry->cpu_id)
+
+);
+
+/* Deprecated dummy functions must be protected against multi-declartion */
+#ifndef _PWR_EVENT_AVOID_DOUBLE_DEFINING_DEPRECATED
+#define _PWR_EVENT_AVOID_DOUBLE_DEFINING_DEPRECATED
+
+enum {
+	POWER_NONE = 0,
+	POWER_CSTATE = 1,
+	POWER_PSTATE = 2,
+};
+#endif /* _PWR_EVENT_AVOID_DOUBLE_DEFINING_DEPRECATED */
+
+#else /* CONFIG_EVENT_POWER_TRACING_DEPRECATED */
+
+#ifndef _PWR_EVENT_AVOID_DOUBLE_DEFINING_DEPRECATED
+#define _PWR_EVENT_AVOID_DOUBLE_DEFINING_DEPRECATED
+enum {
+       POWER_NONE = 0,
+       POWER_CSTATE = 1,
+       POWER_PSTATE = 2,
+};
+
+/* These dummy declaration have to be ripped out when the deprecated
+   events get removed */
+static inline void trace_power_start(u64 type, u64 state, u64 cpuid) {};
+static inline void trace_power_end(u64 cpuid) {};
+static inline void trace_power_start_rcuidle(u64 type, u64 state, u64 cpuid) {};
+static inline void trace_power_end_rcuidle(u64 cpuid) {};
+static inline void trace_power_frequency(u64 type, u64 state, u64 cpuid) {};
+#endif /* _PWR_EVENT_AVOID_DOUBLE_DEFINING_DEPRECATED */
+
+#endif /* CONFIG_EVENT_POWER_TRACING_DEPRECATED */
+
+/*
+ * The clock events are used for clock enable/disable and for
+ *  clock rate change
+ */
+DECLARE_EVENT_CLASS(clock,
+
+	TP_PROTO(const char *name, unsigned int state, unsigned int cpu_id),
+
+	TP_ARGS(name, state, cpu_id),
+
+	TP_STRUCT__entry(
+		__string(       name,           name            )
+		__field(        u64,            state           )
+		__field(        u64,            cpu_id          )
+	),
+
+	TP_fast_assign(
+		__assign_str(name, name);
+		__entry->state = state;
+		__entry->cpu_id = cpu_id;
+	),
+
+	TP_printk("%s state=%lu cpu_id=%lu", __get_str(name),
+		(unsigned long)__entry->state, (unsigned long)__entry->cpu_id)
+);
+
+DEFINE_EVENT(clock, clock_enable,
+
+	TP_PROTO(const char *name, unsigned int state, unsigned int cpu_id),
+
+	TP_ARGS(name, state, cpu_id)
+);
+
+DEFINE_EVENT(clock, clock_disable,
+
+	TP_PROTO(const char *name, unsigned int state, unsigned int cpu_id),
+
+	TP_ARGS(name, state, cpu_id)
+);
+
+DEFINE_EVENT(clock, clock_set_rate,
+
+	TP_PROTO(const char *name, unsigned int state, unsigned int cpu_id),
+
+	TP_ARGS(name, state, cpu_id)
+);
+
+TRACE_EVENT(clock_set_parent,
+
+	TP_PROTO(const char *name, const char *parent_name),
+
+	TP_ARGS(name, parent_name),
+
+	TP_STRUCT__entry(
+		__string(       name,           name            )
+		__string(       parent_name,    parent_name     )
+	),
+
+	TP_fast_assign(
+		__assign_str(name, name);
+		__assign_str(parent_name, parent_name);
+	),
+
+	TP_printk("%s parent=%s", __get_str(name), __get_str(parent_name))
+);
+
+/*
+ * The power domain events are used for power domains transitions
+ */
+DECLARE_EVENT_CLASS(power_domain,
+
+	TP_PROTO(const char *name, unsigned int state, unsigned int cpu_id),
+
+	TP_ARGS(name, state, cpu_id),
+
+	TP_STRUCT__entry(
+		__string(       name,           name            )
+		__field(        u64,            state           )
+		__field(        u64,            cpu_id          )
+	),
+
+	TP_fast_assign(
+		__assign_str(name, name);
+		__entry->state = state;
+		__entry->cpu_id = cpu_id;
+),
+
+	TP_printk("%s state=%lu cpu_id=%lu", __get_str(name),
+		(unsigned long)__entry->state, (unsigned long)__entry->cpu_id)
+);
+
+DEFINE_EVENT(power_domain, power_domain_target,
+
+	TP_PROTO(const char *name, unsigned int state, unsigned int cpu_id),
+
+	TP_ARGS(name, state, cpu_id)
+);
+#endif /* _TRACE_POWER_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/printk.h b/include/trace/events/printk.h
new file mode 100644
index 00000000..94ec79cc
--- /dev/null
+++ b/include/trace/events/printk.h
@@ -0,0 +1,41 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM printk
+
+#if !defined(_TRACE_PRINTK_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_PRINTK_H
+
+#include <linux/tracepoint.h>
+
+TRACE_EVENT_CONDITION(console,
+	TP_PROTO(const char *log_buf, unsigned start, unsigned end,
+		 unsigned log_buf_len),
+
+	TP_ARGS(log_buf, start, end, log_buf_len),
+
+	TP_CONDITION(start != end),
+
+	TP_STRUCT__entry(
+		__dynamic_array(char, msg, end - start + 1)
+	),
+
+	TP_fast_assign(
+		if ((start & (log_buf_len - 1)) > (end & (log_buf_len - 1))) {
+			memcpy(__get_dynamic_array(msg),
+			       log_buf + (start & (log_buf_len - 1)),
+			       log_buf_len - (start & (log_buf_len - 1)));
+			memcpy((char *)__get_dynamic_array(msg) +
+			       log_buf_len - (start & (log_buf_len - 1)),
+			       log_buf, end & (log_buf_len - 1));
+		} else
+			memcpy(__get_dynamic_array(msg),
+			       log_buf + (start & (log_buf_len - 1)),
+			       end - start);
+		((char *)__get_dynamic_array(msg))[end - start] = 0;
+	),
+
+	TP_printk("%s", __get_str(msg))
+);
+#endif /* _TRACE_PRINTK_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/rcu.h b/include/trace/events/rcu.h
new file mode 100644
index 00000000..33709978
--- /dev/null
+++ b/include/trace/events/rcu.h
@@ -0,0 +1,570 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM rcu
+
+#if !defined(_TRACE_RCU_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_RCU_H
+
+#include <linux/tracepoint.h>
+
+/*
+ * Tracepoint for start/end markers used for utilization calculations.
+ * By convention, the string is of the following forms:
+ *
+ * "Start <activity>" -- Mark the start of the specified activity,
+ *			 such as "context switch".  Nesting is permitted.
+ * "End <activity>" -- Mark the end of the specified activity.
+ *
+ * An "@" character within "<activity>" is a comment character: Data
+ * reduction scripts will ignore the "@" and the remainder of the line.
+ */
+TRACE_EVENT(rcu_utilization,
+
+	TP_PROTO(char *s),
+
+	TP_ARGS(s),
+
+	TP_STRUCT__entry(
+		__field(char *, s)
+	),
+
+	TP_fast_assign(
+		__entry->s = s;
+	),
+
+	TP_printk("%s", __entry->s)
+);
+
+#ifdef CONFIG_RCU_TRACE
+
+#if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU)
+
+/*
+ * Tracepoint for grace-period events: starting and ending a grace
+ * period ("start" and "end", respectively), a CPU noting the start
+ * of a new grace period or the end of an old grace period ("cpustart"
+ * and "cpuend", respectively), a CPU passing through a quiescent
+ * state ("cpuqs"), a CPU coming online or going offline ("cpuonl"
+ * and "cpuofl", respectively), and a CPU being kicked for being too
+ * long in dyntick-idle mode ("kick").
+ */
+TRACE_EVENT(rcu_grace_period,
+
+	TP_PROTO(char *rcuname, unsigned long gpnum, char *gpevent),
+
+	TP_ARGS(rcuname, gpnum, gpevent),
+
+	TP_STRUCT__entry(
+		__field(char *, rcuname)
+		__field(unsigned long, gpnum)
+		__field(char *, gpevent)
+	),
+
+	TP_fast_assign(
+		__entry->rcuname = rcuname;
+		__entry->gpnum = gpnum;
+		__entry->gpevent = gpevent;
+	),
+
+	TP_printk("%s %lu %s",
+		  __entry->rcuname, __entry->gpnum, __entry->gpevent)
+);
+
+/*
+ * Tracepoint for grace-period-initialization events.  These are
+ * distinguished by the type of RCU, the new grace-period number, the
+ * rcu_node structure level, the starting and ending CPU covered by the
+ * rcu_node structure, and the mask of CPUs that will be waited for.
+ * All but the type of RCU are extracted from the rcu_node structure.
+ */
+TRACE_EVENT(rcu_grace_period_init,
+
+	TP_PROTO(char *rcuname, unsigned long gpnum, u8 level,
+		 int grplo, int grphi, unsigned long qsmask),
+
+	TP_ARGS(rcuname, gpnum, level, grplo, grphi, qsmask),
+
+	TP_STRUCT__entry(
+		__field(char *, rcuname)
+		__field(unsigned long, gpnum)
+		__field(u8, level)
+		__field(int, grplo)
+		__field(int, grphi)
+		__field(unsigned long, qsmask)
+	),
+
+	TP_fast_assign(
+		__entry->rcuname = rcuname;
+		__entry->gpnum = gpnum;
+		__entry->level = level;
+		__entry->grplo = grplo;
+		__entry->grphi = grphi;
+		__entry->qsmask = qsmask;
+	),
+
+	TP_printk("%s %lu %u %d %d %lx",
+		  __entry->rcuname, __entry->gpnum, __entry->level,
+		  __entry->grplo, __entry->grphi, __entry->qsmask)
+);
+
+/*
+ * Tracepoint for tasks blocking within preemptible-RCU read-side
+ * critical sections.  Track the type of RCU (which one day might
+ * include SRCU), the grace-period number that the task is blocking
+ * (the current or the next), and the task's PID.
+ */
+TRACE_EVENT(rcu_preempt_task,
+
+	TP_PROTO(char *rcuname, int pid, unsigned long gpnum),
+
+	TP_ARGS(rcuname, pid, gpnum),
+
+	TP_STRUCT__entry(
+		__field(char *, rcuname)
+		__field(unsigned long, gpnum)
+		__field(int, pid)
+	),
+
+	TP_fast_assign(
+		__entry->rcuname = rcuname;
+		__entry->gpnum = gpnum;
+		__entry->pid = pid;
+	),
+
+	TP_printk("%s %lu %d",
+		  __entry->rcuname, __entry->gpnum, __entry->pid)
+);
+
+/*
+ * Tracepoint for tasks that blocked within a given preemptible-RCU
+ * read-side critical section exiting that critical section.  Track the
+ * type of RCU (which one day might include SRCU) and the task's PID.
+ */
+TRACE_EVENT(rcu_unlock_preempted_task,
+
+	TP_PROTO(char *rcuname, unsigned long gpnum, int pid),
+
+	TP_ARGS(rcuname, gpnum, pid),
+
+	TP_STRUCT__entry(
+		__field(char *, rcuname)
+		__field(unsigned long, gpnum)
+		__field(int, pid)
+	),
+
+	TP_fast_assign(
+		__entry->rcuname = rcuname;
+		__entry->gpnum = gpnum;
+		__entry->pid = pid;
+	),
+
+	TP_printk("%s %lu %d", __entry->rcuname, __entry->gpnum, __entry->pid)
+);
+
+/*
+ * Tracepoint for quiescent-state-reporting events.  These are
+ * distinguished by the type of RCU, the grace-period number, the
+ * mask of quiescent lower-level entities, the rcu_node structure level,
+ * the starting and ending CPU covered by the rcu_node structure, and
+ * whether there are any blocked tasks blocking the current grace period.
+ * All but the type of RCU are extracted from the rcu_node structure.
+ */
+TRACE_EVENT(rcu_quiescent_state_report,
+
+	TP_PROTO(char *rcuname, unsigned long gpnum,
+		 unsigned long mask, unsigned long qsmask,
+		 u8 level, int grplo, int grphi, int gp_tasks),
+
+	TP_ARGS(rcuname, gpnum, mask, qsmask, level, grplo, grphi, gp_tasks),
+
+	TP_STRUCT__entry(
+		__field(char *, rcuname)
+		__field(unsigned long, gpnum)
+		__field(unsigned long, mask)
+		__field(unsigned long, qsmask)
+		__field(u8, level)
+		__field(int, grplo)
+		__field(int, grphi)
+		__field(u8, gp_tasks)
+	),
+
+	TP_fast_assign(
+		__entry->rcuname = rcuname;
+		__entry->gpnum = gpnum;
+		__entry->mask = mask;
+		__entry->qsmask = qsmask;
+		__entry->level = level;
+		__entry->grplo = grplo;
+		__entry->grphi = grphi;
+		__entry->gp_tasks = gp_tasks;
+	),
+
+	TP_printk("%s %lu %lx>%lx %u %d %d %u",
+		  __entry->rcuname, __entry->gpnum,
+		  __entry->mask, __entry->qsmask, __entry->level,
+		  __entry->grplo, __entry->grphi, __entry->gp_tasks)
+);
+
+/*
+ * Tracepoint for quiescent states detected by force_quiescent_state().
+ * These trace events include the type of RCU, the grace-period number
+ * that was blocked by the CPU, the CPU itself, and the type of quiescent
+ * state, which can be "dti" for dyntick-idle mode, "ofl" for CPU offline,
+ * or "kick" when kicking a CPU that has been in dyntick-idle mode for
+ * too long.
+ */
+TRACE_EVENT(rcu_fqs,
+
+	TP_PROTO(char *rcuname, unsigned long gpnum, int cpu, char *qsevent),
+
+	TP_ARGS(rcuname, gpnum, cpu, qsevent),
+
+	TP_STRUCT__entry(
+		__field(char *, rcuname)
+		__field(unsigned long, gpnum)
+		__field(int, cpu)
+		__field(char *, qsevent)
+	),
+
+	TP_fast_assign(
+		__entry->rcuname = rcuname;
+		__entry->gpnum = gpnum;
+		__entry->cpu = cpu;
+		__entry->qsevent = qsevent;
+	),
+
+	TP_printk("%s %lu %d %s",
+		  __entry->rcuname, __entry->gpnum,
+		  __entry->cpu, __entry->qsevent)
+);
+
+#endif /* #if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU) */
+
+/*
+ * Tracepoint for dyntick-idle entry/exit events.  These take a string
+ * as argument: "Start" for entering dyntick-idle mode, "End" for
+ * leaving it, "--=" for events moving towards idle, and "++=" for events
+ * moving away from idle.  "Error on entry: not idle task" and "Error on
+ * exit: not idle task" indicate that a non-idle task is erroneously
+ * toying with the idle loop.
+ *
+ * These events also take a pair of numbers, which indicate the nesting
+ * depth before and after the event of interest.  Note that task-related
+ * events use the upper bits of each number, while interrupt-related
+ * events use the lower bits.
+ */
+TRACE_EVENT(rcu_dyntick,
+
+	TP_PROTO(char *polarity, long long oldnesting, long long newnesting),
+
+	TP_ARGS(polarity, oldnesting, newnesting),
+
+	TP_STRUCT__entry(
+		__field(char *, polarity)
+		__field(long long, oldnesting)
+		__field(long long, newnesting)
+	),
+
+	TP_fast_assign(
+		__entry->polarity = polarity;
+		__entry->oldnesting = oldnesting;
+		__entry->newnesting = newnesting;
+	),
+
+	TP_printk("%s %llx %llx", __entry->polarity,
+		  __entry->oldnesting, __entry->newnesting)
+);
+
+/*
+ * Tracepoint for RCU preparation for idle, the goal being to get RCU
+ * processing done so that the current CPU can shut off its scheduling
+ * clock and enter dyntick-idle mode.  One way to accomplish this is
+ * to drain all RCU callbacks from this CPU, and the other is to have
+ * done everything RCU requires for the current grace period.  In this
+ * latter case, the CPU will be awakened at the end of the current grace
+ * period in order to process the remainder of its callbacks.
+ *
+ * These tracepoints take a string as argument:
+ *
+ *	"No callbacks": Nothing to do, no callbacks on this CPU.
+ *	"In holdoff": Nothing to do, holding off after unsuccessful attempt.
+ *	"Begin holdoff": Attempt failed, don't retry until next jiffy.
+ *	"Dyntick with callbacks": Entering dyntick-idle despite callbacks.
+ *	"More callbacks": Still more callbacks, try again to clear them out.
+ *	"Callbacks drained": All callbacks processed, off to dyntick idle!
+ *	"Timer": Timer fired to cause CPU to continue processing callbacks.
+ */
+TRACE_EVENT(rcu_prep_idle,
+
+	TP_PROTO(char *reason),
+
+	TP_ARGS(reason),
+
+	TP_STRUCT__entry(
+		__field(char *, reason)
+	),
+
+	TP_fast_assign(
+		__entry->reason = reason;
+	),
+
+	TP_printk("%s", __entry->reason)
+);
+
+/*
+ * Tracepoint for the registration of a single RCU callback function.
+ * The first argument is the type of RCU, the second argument is
+ * a pointer to the RCU callback itself, the third element is the
+ * number of lazy callbacks queued, and the fourth element is the
+ * total number of callbacks queued.
+ */
+TRACE_EVENT(rcu_callback,
+
+	TP_PROTO(char *rcuname, struct rcu_head *rhp, long qlen_lazy,
+		 long qlen),
+
+	TP_ARGS(rcuname, rhp, qlen_lazy, qlen),
+
+	TP_STRUCT__entry(
+		__field(char *, rcuname)
+		__field(void *, rhp)
+		__field(void *, func)
+		__field(long, qlen_lazy)
+		__field(long, qlen)
+	),
+
+	TP_fast_assign(
+		__entry->rcuname = rcuname;
+		__entry->rhp = rhp;
+		__entry->func = rhp->func;
+		__entry->qlen_lazy = qlen_lazy;
+		__entry->qlen = qlen;
+	),
+
+	TP_printk("%s rhp=%p func=%pf %ld/%ld",
+		  __entry->rcuname, __entry->rhp, __entry->func,
+		  __entry->qlen_lazy, __entry->qlen)
+);
+
+/*
+ * Tracepoint for the registration of a single RCU callback of the special
+ * kfree() form.  The first argument is the RCU type, the second argument
+ * is a pointer to the RCU callback, the third argument is the offset
+ * of the callback within the enclosing RCU-protected data structure,
+ * the fourth argument is the number of lazy callbacks queued, and the
+ * fifth argument is the total number of callbacks queued.
+ */
+TRACE_EVENT(rcu_kfree_callback,
+
+	TP_PROTO(char *rcuname, struct rcu_head *rhp, unsigned long offset,
+		 long qlen_lazy, long qlen),
+
+	TP_ARGS(rcuname, rhp, offset, qlen_lazy, qlen),
+
+	TP_STRUCT__entry(
+		__field(char *, rcuname)
+		__field(void *, rhp)
+		__field(unsigned long, offset)
+		__field(long, qlen_lazy)
+		__field(long, qlen)
+	),
+
+	TP_fast_assign(
+		__entry->rcuname = rcuname;
+		__entry->rhp = rhp;
+		__entry->offset = offset;
+		__entry->qlen_lazy = qlen_lazy;
+		__entry->qlen = qlen;
+	),
+
+	TP_printk("%s rhp=%p func=%ld %ld/%ld",
+		  __entry->rcuname, __entry->rhp, __entry->offset,
+		  __entry->qlen_lazy, __entry->qlen)
+);
+
+/*
+ * Tracepoint for marking the beginning rcu_do_batch, performed to start
+ * RCU callback invocation.  The first argument is the RCU flavor,
+ * the second is the number of lazy callbacks queued, the third is
+ * the total number of callbacks queued, and the fourth argument is
+ * the current RCU-callback batch limit.
+ */
+TRACE_EVENT(rcu_batch_start,
+
+	TP_PROTO(char *rcuname, long qlen_lazy, long qlen, int blimit),
+
+	TP_ARGS(rcuname, qlen_lazy, qlen, blimit),
+
+	TP_STRUCT__entry(
+		__field(char *, rcuname)
+		__field(long, qlen_lazy)
+		__field(long, qlen)
+		__field(int, blimit)
+	),
+
+	TP_fast_assign(
+		__entry->rcuname = rcuname;
+		__entry->qlen_lazy = qlen_lazy;
+		__entry->qlen = qlen;
+		__entry->blimit = blimit;
+	),
+
+	TP_printk("%s CBs=%ld/%ld bl=%d",
+		  __entry->rcuname, __entry->qlen_lazy, __entry->qlen,
+		  __entry->blimit)
+);
+
+/*
+ * Tracepoint for the invocation of a single RCU callback function.
+ * The first argument is the type of RCU, and the second argument is
+ * a pointer to the RCU callback itself.
+ */
+TRACE_EVENT(rcu_invoke_callback,
+
+	TP_PROTO(char *rcuname, struct rcu_head *rhp),
+
+	TP_ARGS(rcuname, rhp),
+
+	TP_STRUCT__entry(
+		__field(char *, rcuname)
+		__field(void *, rhp)
+		__field(void *, func)
+	),
+
+	TP_fast_assign(
+		__entry->rcuname = rcuname;
+		__entry->rhp = rhp;
+		__entry->func = rhp->func;
+	),
+
+	TP_printk("%s rhp=%p func=%pf",
+		  __entry->rcuname, __entry->rhp, __entry->func)
+);
+
+/*
+ * Tracepoint for the invocation of a single RCU callback of the special
+ * kfree() form.  The first argument is the RCU flavor, the second
+ * argument is a pointer to the RCU callback, and the third argument
+ * is the offset of the callback within the enclosing RCU-protected
+ * data structure.
+ */
+TRACE_EVENT(rcu_invoke_kfree_callback,
+
+	TP_PROTO(char *rcuname, struct rcu_head *rhp, unsigned long offset),
+
+	TP_ARGS(rcuname, rhp, offset),
+
+	TP_STRUCT__entry(
+		__field(char *, rcuname)
+		__field(void *, rhp)
+		__field(unsigned long, offset)
+	),
+
+	TP_fast_assign(
+		__entry->rcuname = rcuname;
+		__entry->rhp = rhp;
+		__entry->offset	= offset;
+	),
+
+	TP_printk("%s rhp=%p func=%ld",
+		  __entry->rcuname, __entry->rhp, __entry->offset)
+);
+
+/*
+ * Tracepoint for exiting rcu_do_batch after RCU callbacks have been
+ * invoked.  The first argument is the name of the RCU flavor,
+ * the second argument is number of callbacks actually invoked,
+ * the third argument (cb) is whether or not any of the callbacks that
+ * were ready to invoke at the beginning of this batch are still
+ * queued, the fourth argument (nr) is the return value of need_resched(),
+ * the fifth argument (iit) is 1 if the current task is the idle task,
+ * and the sixth argument (risk) is the return value from
+ * rcu_is_callbacks_kthread().
+ */
+TRACE_EVENT(rcu_batch_end,
+
+	TP_PROTO(char *rcuname, int callbacks_invoked,
+		 bool cb, bool nr, bool iit, bool risk),
+
+	TP_ARGS(rcuname, callbacks_invoked, cb, nr, iit, risk),
+
+	TP_STRUCT__entry(
+		__field(char *, rcuname)
+		__field(int, callbacks_invoked)
+		__field(bool, cb)
+		__field(bool, nr)
+		__field(bool, iit)
+		__field(bool, risk)
+	),
+
+	TP_fast_assign(
+		__entry->rcuname = rcuname;
+		__entry->callbacks_invoked = callbacks_invoked;
+		__entry->cb = cb;
+		__entry->nr = nr;
+		__entry->iit = iit;
+		__entry->risk = risk;
+	),
+
+	TP_printk("%s CBs-invoked=%d idle=%c%c%c%c",
+		  __entry->rcuname, __entry->callbacks_invoked,
+		  __entry->cb ? 'C' : '.',
+		  __entry->nr ? 'S' : '.',
+		  __entry->iit ? 'I' : '.',
+		  __entry->risk ? 'R' : '.')
+);
+
+/*
+ * Tracepoint for rcutorture readers.  The first argument is the name
+ * of the RCU flavor from rcutorture's viewpoint and the second argument
+ * is the callback address.
+ */
+TRACE_EVENT(rcu_torture_read,
+
+	TP_PROTO(char *rcutorturename, struct rcu_head *rhp),
+
+	TP_ARGS(rcutorturename, rhp),
+
+	TP_STRUCT__entry(
+		__field(char *, rcutorturename)
+		__field(struct rcu_head *, rhp)
+	),
+
+	TP_fast_assign(
+		__entry->rcutorturename = rcutorturename;
+		__entry->rhp = rhp;
+	),
+
+	TP_printk("%s torture read %p",
+		  __entry->rcutorturename, __entry->rhp)
+);
+
+#else /* #ifdef CONFIG_RCU_TRACE */
+
+#define trace_rcu_grace_period(rcuname, gpnum, gpevent) do { } while (0)
+#define trace_rcu_grace_period_init(rcuname, gpnum, level, grplo, grphi, \
+				    qsmask) do { } while (0)
+#define trace_rcu_preempt_task(rcuname, pid, gpnum) do { } while (0)
+#define trace_rcu_unlock_preempted_task(rcuname, gpnum, pid) do { } while (0)
+#define trace_rcu_quiescent_state_report(rcuname, gpnum, mask, qsmask, level, \
+					 grplo, grphi, gp_tasks) do { } \
+	while (0)
+#define trace_rcu_fqs(rcuname, gpnum, cpu, qsevent) do { } while (0)
+#define trace_rcu_dyntick(polarity, oldnesting, newnesting) do { } while (0)
+#define trace_rcu_prep_idle(reason) do { } while (0)
+#define trace_rcu_callback(rcuname, rhp, qlen_lazy, qlen) do { } while (0)
+#define trace_rcu_kfree_callback(rcuname, rhp, offset, qlen_lazy, qlen) \
+	do { } while (0)
+#define trace_rcu_batch_start(rcuname, qlen_lazy, qlen, blimit) \
+	do { } while (0)
+#define trace_rcu_invoke_callback(rcuname, rhp) do { } while (0)
+#define trace_rcu_invoke_kfree_callback(rcuname, rhp, offset) do { } while (0)
+#define trace_rcu_batch_end(rcuname, callbacks_invoked, cb, nr, iit, risk) \
+	do { } while (0)
+#define trace_rcu_torture_read(rcutorturename, rhp) do { } while (0)
+
+#endif /* #else #ifdef CONFIG_RCU_TRACE */
+
+#endif /* _TRACE_RCU_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/regmap.h b/include/trace/events/regmap.h
new file mode 100644
index 00000000..41a7dbd5
--- /dev/null
+++ b/include/trace/events/regmap.h
@@ -0,0 +1,181 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM regmap
+
+#if !defined(_TRACE_REGMAP_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_REGMAP_H
+
+#include <linux/ktime.h>
+#include <linux/tracepoint.h>
+
+struct device;
+struct regmap;
+
+/*
+ * Log register events
+ */
+DECLARE_EVENT_CLASS(regmap_reg,
+
+	TP_PROTO(struct device *dev, unsigned int reg,
+		 unsigned int val),
+
+	TP_ARGS(dev, reg, val),
+
+	TP_STRUCT__entry(
+		__string(	name,		dev_name(dev)	)
+		__field(	unsigned int,	reg		)
+		__field(	unsigned int,	val		)
+	),
+
+	TP_fast_assign(
+		__assign_str(name, dev_name(dev));
+		__entry->reg = reg;
+		__entry->val = val;
+	),
+
+	TP_printk("%s reg=%x val=%x", __get_str(name),
+		  (unsigned int)__entry->reg,
+		  (unsigned int)__entry->val)
+);
+
+DEFINE_EVENT(regmap_reg, regmap_reg_write,
+
+	TP_PROTO(struct device *dev, unsigned int reg,
+		 unsigned int val),
+
+	TP_ARGS(dev, reg, val)
+
+);
+
+DEFINE_EVENT(regmap_reg, regmap_reg_read,
+
+	TP_PROTO(struct device *dev, unsigned int reg,
+		 unsigned int val),
+
+	TP_ARGS(dev, reg, val)
+
+);
+
+DEFINE_EVENT(regmap_reg, regmap_reg_read_cache,
+
+	TP_PROTO(struct device *dev, unsigned int reg,
+		 unsigned int val),
+
+	TP_ARGS(dev, reg, val)
+
+);
+
+DECLARE_EVENT_CLASS(regmap_block,
+
+	TP_PROTO(struct device *dev, unsigned int reg, int count),
+
+	TP_ARGS(dev, reg, count),
+
+	TP_STRUCT__entry(
+		__string(	name,		dev_name(dev)	)
+		__field(	unsigned int,	reg		)
+		__field(	int,		count		)
+	),
+
+	TP_fast_assign(
+		__assign_str(name, dev_name(dev));
+		__entry->reg = reg;
+		__entry->count = count;
+	),
+
+	TP_printk("%s reg=%x count=%d", __get_str(name),
+		  (unsigned int)__entry->reg,
+		  (int)__entry->count)
+);
+
+DEFINE_EVENT(regmap_block, regmap_hw_read_start,
+
+	TP_PROTO(struct device *dev, unsigned int reg, int count),
+
+	TP_ARGS(dev, reg, count)
+);
+
+DEFINE_EVENT(regmap_block, regmap_hw_read_done,
+
+	TP_PROTO(struct device *dev, unsigned int reg, int count),
+
+	TP_ARGS(dev, reg, count)
+);
+
+DEFINE_EVENT(regmap_block, regmap_hw_write_start,
+
+	TP_PROTO(struct device *dev, unsigned int reg, int count),
+
+	TP_ARGS(dev, reg, count)
+);
+
+DEFINE_EVENT(regmap_block, regmap_hw_write_done,
+
+	TP_PROTO(struct device *dev, unsigned int reg, int count),
+
+	TP_ARGS(dev, reg, count)
+);
+
+TRACE_EVENT(regcache_sync,
+
+	TP_PROTO(struct device *dev, const char *type,
+		 const char *status),
+
+	TP_ARGS(dev, type, status),
+
+	TP_STRUCT__entry(
+		__string(       name,           dev_name(dev)   )
+		__string(	status,		status		)
+		__string(	type,		type		)
+		__field(	int,		type		)
+	),
+
+	TP_fast_assign(
+		__assign_str(name, dev_name(dev));
+		__assign_str(status, status);
+		__assign_str(type, type);
+	),
+
+	TP_printk("%s type=%s status=%s", __get_str(name),
+		  __get_str(type), __get_str(status))
+);
+
+DECLARE_EVENT_CLASS(regmap_bool,
+
+	TP_PROTO(struct device *dev, bool flag),
+
+	TP_ARGS(dev, flag),
+
+	TP_STRUCT__entry(
+		__string(	name,		dev_name(dev)	)
+		__field(	int,		flag		)
+	),
+
+	TP_fast_assign(
+		__assign_str(name, dev_name(dev));
+		__entry->flag = flag;
+	),
+
+	TP_printk("%s flag=%d", __get_str(name),
+		  (int)__entry->flag)
+);
+
+DEFINE_EVENT(regmap_bool, regmap_cache_only,
+
+	TP_PROTO(struct device *dev, bool flag),
+
+	TP_ARGS(dev, flag)
+
+);
+
+DEFINE_EVENT(regmap_bool, regmap_cache_bypass,
+
+	TP_PROTO(struct device *dev, bool flag),
+
+	TP_ARGS(dev, flag)
+
+);
+
+#endif /* _TRACE_REGMAP_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/regulator.h b/include/trace/events/regulator.h
new file mode 100644
index 00000000..37502a74
--- /dev/null
+++ b/include/trace/events/regulator.h
@@ -0,0 +1,141 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM regulator
+
+#if !defined(_TRACE_REGULATOR_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_REGULATOR_H
+
+#include <linux/ktime.h>
+#include <linux/tracepoint.h>
+
+/*
+ * Events which just log themselves and the regulator name for enable/disable
+ * type tracking.
+ */
+DECLARE_EVENT_CLASS(regulator_basic,
+
+	TP_PROTO(const char *name),
+
+	TP_ARGS(name),
+
+	TP_STRUCT__entry(
+		__string(	name,	name	)
+	),
+
+	TP_fast_assign(
+		__assign_str(name, name);
+	),
+
+	TP_printk("name=%s", __get_str(name))
+
+);
+
+DEFINE_EVENT(regulator_basic, regulator_enable,
+
+	TP_PROTO(const char *name),
+
+	TP_ARGS(name)
+
+);
+
+DEFINE_EVENT(regulator_basic, regulator_enable_delay,
+
+	TP_PROTO(const char *name),
+
+	TP_ARGS(name)
+
+);
+
+DEFINE_EVENT(regulator_basic, regulator_enable_complete,
+
+	TP_PROTO(const char *name),
+
+	TP_ARGS(name)
+
+);
+
+DEFINE_EVENT(regulator_basic, regulator_disable,
+
+	TP_PROTO(const char *name),
+
+	TP_ARGS(name)
+
+);
+
+DEFINE_EVENT(regulator_basic, regulator_disable_complete,
+
+	TP_PROTO(const char *name),
+
+	TP_ARGS(name)
+
+);
+
+/*
+ * Events that take a range of numerical values, mostly for voltages
+ * and so on.
+ */
+DECLARE_EVENT_CLASS(regulator_range,
+
+	TP_PROTO(const char *name, int min, int max),
+
+	TP_ARGS(name, min, max),
+
+	TP_STRUCT__entry(
+		__string(	name,		name		)
+		__field(        int,            min             )
+		__field(        int,            max             )
+	),
+
+	TP_fast_assign(
+		__assign_str(name, name);
+		__entry->min  = min;
+		__entry->max  = max;
+	),
+
+	TP_printk("name=%s (%d-%d)", __get_str(name),
+		  (int)__entry->min, (int)__entry->max)
+);
+
+DEFINE_EVENT(regulator_range, regulator_set_voltage,
+
+	TP_PROTO(const char *name, int min, int max),
+
+	TP_ARGS(name, min, max)
+
+);
+
+
+/*
+ * Events that take a single value, mostly for readback and refcounts.
+ */
+DECLARE_EVENT_CLASS(regulator_value,
+
+	TP_PROTO(const char *name, unsigned int val),
+
+	TP_ARGS(name, val),
+
+	TP_STRUCT__entry(
+		__string(	name,		name		)
+		__field(        unsigned int,   val             )
+	),
+
+	TP_fast_assign(
+		__assign_str(name, name);
+		__entry->val  = val;
+	),
+
+	TP_printk("name=%s, val=%u", __get_str(name),
+		  (int)__entry->val)
+);
+
+DEFINE_EVENT(regulator_value, regulator_set_voltage_complete,
+
+	TP_PROTO(const char *name, unsigned int value),
+
+	TP_ARGS(name, value)
+
+);
+
+#endif /* _TRACE_POWER_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/rpm.h b/include/trace/events/rpm.h
new file mode 100644
index 00000000..33f85b68
--- /dev/null
+++ b/include/trace/events/rpm.h
@@ -0,0 +1,100 @@
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM rpm
+
+#if !defined(_TRACE_RUNTIME_POWER_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_RUNTIME_POWER_H
+
+#include <linux/ktime.h>
+#include <linux/tracepoint.h>
+
+struct device;
+
+/*
+ * The rpm_internal events are used for tracing some important
+ * runtime pm internal functions.
+ */
+DECLARE_EVENT_CLASS(rpm_internal,
+
+	TP_PROTO(struct device *dev, int flags),
+
+	TP_ARGS(dev, flags),
+
+	TP_STRUCT__entry(
+		__string(       name,		dev_name(dev)	)
+		__field(        int,            flags           )
+		__field(        int ,   	usage_count	)
+		__field(        int ,   	disable_depth   )
+		__field(        int ,   	runtime_auto	)
+		__field(        int ,   	request_pending	)
+		__field(        int ,   	irq_safe	)
+		__field(        int ,   	child_count 	)
+	),
+
+	TP_fast_assign(
+		__assign_str(name, dev_name(dev));
+		__entry->flags = flags;
+		__entry->usage_count = atomic_read(
+			&dev->power.usage_count);
+		__entry->disable_depth = dev->power.disable_depth;
+		__entry->runtime_auto = dev->power.runtime_auto;
+		__entry->request_pending = dev->power.request_pending;
+		__entry->irq_safe = dev->power.irq_safe;
+		__entry->child_count = atomic_read(
+			&dev->power.child_count);
+	),
+
+	TP_printk("%s flags-%x cnt-%-2d dep-%-2d auto-%-1d p-%-1d"
+			" irq-%-1d child-%d",
+			__get_str(name), __entry->flags,
+			__entry->usage_count,
+			__entry->disable_depth,
+			__entry->runtime_auto,
+			__entry->request_pending,
+			__entry->irq_safe,
+			__entry->child_count
+		 )
+);
+DEFINE_EVENT(rpm_internal, rpm_suspend,
+
+	TP_PROTO(struct device *dev, int flags),
+
+	TP_ARGS(dev, flags)
+);
+DEFINE_EVENT(rpm_internal, rpm_resume,
+
+	TP_PROTO(struct device *dev, int flags),
+
+	TP_ARGS(dev, flags)
+);
+DEFINE_EVENT(rpm_internal, rpm_idle,
+
+	TP_PROTO(struct device *dev, int flags),
+
+	TP_ARGS(dev, flags)
+);
+
+TRACE_EVENT(rpm_return_int,
+	TP_PROTO(struct device *dev, unsigned long ip, int ret),
+	TP_ARGS(dev, ip, ret),
+
+	TP_STRUCT__entry(
+		__string(       name,		dev_name(dev))
+		__field(	unsigned long,		ip	)
+		__field(	int,			ret	)
+	),
+
+	TP_fast_assign(
+		__assign_str(name, dev_name(dev));
+		__entry->ip = ip;
+		__entry->ret = ret;
+	),
+
+	TP_printk("%pS:%s ret=%d", (void *)__entry->ip, __get_str(name),
+		__entry->ret)
+);
+
+#endif /* _TRACE_RUNTIME_POWER_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/sched.h b/include/trace/events/sched.h
new file mode 100644
index 00000000..ea7a2035
--- /dev/null
+++ b/include/trace/events/sched.h
@@ -0,0 +1,432 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM sched
+
+#if !defined(_TRACE_SCHED_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_SCHED_H
+
+#include <linux/sched.h>
+#include <linux/tracepoint.h>
+#include <linux/binfmts.h>
+
+/*
+ * Tracepoint for calling kthread_stop, performed to end a kthread:
+ */
+TRACE_EVENT(sched_kthread_stop,
+
+	TP_PROTO(struct task_struct *t),
+
+	TP_ARGS(t),
+
+	TP_STRUCT__entry(
+		__array(	char,	comm,	TASK_COMM_LEN	)
+		__field(	pid_t,	pid			)
+	),
+
+	TP_fast_assign(
+		memcpy(__entry->comm, t->comm, TASK_COMM_LEN);
+		__entry->pid	= t->pid;
+	),
+
+	TP_printk("comm=%s pid=%d", __entry->comm, __entry->pid)
+);
+
+/*
+ * Tracepoint for the return value of the kthread stopping:
+ */
+TRACE_EVENT(sched_kthread_stop_ret,
+
+	TP_PROTO(int ret),
+
+	TP_ARGS(ret),
+
+	TP_STRUCT__entry(
+		__field(	int,	ret	)
+	),
+
+	TP_fast_assign(
+		__entry->ret	= ret;
+	),
+
+	TP_printk("ret=%d", __entry->ret)
+);
+
+/*
+ * Tracepoint for waking up a task:
+ */
+DECLARE_EVENT_CLASS(sched_wakeup_template,
+
+	TP_PROTO(struct task_struct *p, int success),
+
+	TP_ARGS(p, success),
+
+	TP_STRUCT__entry(
+		__array(	char,	comm,	TASK_COMM_LEN	)
+		__field(	pid_t,	pid			)
+		__field(	int,	prio			)
+		__field(	int,	success			)
+		__field(	int,	target_cpu		)
+	),
+
+	TP_fast_assign(
+		memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
+		__entry->pid		= p->pid;
+		__entry->prio		= p->prio;
+		__entry->success	= success;
+		__entry->target_cpu	= task_cpu(p);
+	),
+
+	TP_printk("comm=%s pid=%d prio=%d success=%d target_cpu=%03d",
+		  __entry->comm, __entry->pid, __entry->prio,
+		  __entry->success, __entry->target_cpu)
+);
+
+DEFINE_EVENT(sched_wakeup_template, sched_wakeup,
+	     TP_PROTO(struct task_struct *p, int success),
+	     TP_ARGS(p, success));
+
+/*
+ * Tracepoint for waking up a new task:
+ */
+DEFINE_EVENT(sched_wakeup_template, sched_wakeup_new,
+	     TP_PROTO(struct task_struct *p, int success),
+	     TP_ARGS(p, success));
+
+#ifdef CREATE_TRACE_POINTS
+static inline long __trace_sched_switch_state(struct task_struct *p)
+{
+	long state = p->state;
+
+#ifdef CONFIG_PREEMPT
+	/*
+	 * For all intents and purposes a preempted task is a running task.
+	 */
+	if (task_thread_info(p)->preempt_count & PREEMPT_ACTIVE)
+		state = TASK_RUNNING | TASK_STATE_MAX;
+#endif
+
+	return state;
+}
+#endif
+
+/*
+ * Tracepoint for task switches, performed by the scheduler:
+ */
+TRACE_EVENT(sched_switch,
+
+	TP_PROTO(struct task_struct *prev,
+		 struct task_struct *next),
+
+	TP_ARGS(prev, next),
+
+	TP_STRUCT__entry(
+		__array(	char,	prev_comm,	TASK_COMM_LEN	)
+		__field(	pid_t,	prev_pid			)
+		__field(	int,	prev_prio			)
+		__field(	long,	prev_state			)
+		__array(	char,	next_comm,	TASK_COMM_LEN	)
+		__field(	pid_t,	next_pid			)
+		__field(	int,	next_prio			)
+	),
+
+	TP_fast_assign(
+		memcpy(__entry->next_comm, next->comm, TASK_COMM_LEN);
+		__entry->prev_pid	= prev->pid;
+		__entry->prev_prio	= prev->prio;
+		__entry->prev_state	= __trace_sched_switch_state(prev);
+		memcpy(__entry->prev_comm, prev->comm, TASK_COMM_LEN);
+		__entry->next_pid	= next->pid;
+		__entry->next_prio	= next->prio;
+	),
+
+	TP_printk("prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==> next_comm=%s next_pid=%d next_prio=%d",
+		__entry->prev_comm, __entry->prev_pid, __entry->prev_prio,
+		__entry->prev_state & (TASK_STATE_MAX-1) ?
+		  __print_flags(__entry->prev_state & (TASK_STATE_MAX-1), "|",
+				{ 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" },
+				{ 16, "Z" }, { 32, "X" }, { 64, "x" },
+				{ 128, "W" }) : "R",
+		__entry->prev_state & TASK_STATE_MAX ? "+" : "",
+		__entry->next_comm, __entry->next_pid, __entry->next_prio)
+);
+
+/*
+ * Tracepoint for a task being migrated:
+ */
+TRACE_EVENT(sched_migrate_task,
+
+	TP_PROTO(struct task_struct *p, int dest_cpu),
+
+	TP_ARGS(p, dest_cpu),
+
+	TP_STRUCT__entry(
+		__array(	char,	comm,	TASK_COMM_LEN	)
+		__field(	pid_t,	pid			)
+		__field(	int,	prio			)
+		__field(	int,	orig_cpu		)
+		__field(	int,	dest_cpu		)
+	),
+
+	TP_fast_assign(
+		memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
+		__entry->pid		= p->pid;
+		__entry->prio		= p->prio;
+		__entry->orig_cpu	= task_cpu(p);
+		__entry->dest_cpu	= dest_cpu;
+	),
+
+	TP_printk("comm=%s pid=%d prio=%d orig_cpu=%d dest_cpu=%d",
+		  __entry->comm, __entry->pid, __entry->prio,
+		  __entry->orig_cpu, __entry->dest_cpu)
+);
+
+DECLARE_EVENT_CLASS(sched_process_template,
+
+	TP_PROTO(struct task_struct *p),
+
+	TP_ARGS(p),
+
+	TP_STRUCT__entry(
+		__array(	char,	comm,	TASK_COMM_LEN	)
+		__field(	pid_t,	pid			)
+		__field(	int,	prio			)
+	),
+
+	TP_fast_assign(
+		memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
+		__entry->pid		= p->pid;
+		__entry->prio		= p->prio;
+	),
+
+	TP_printk("comm=%s pid=%d prio=%d",
+		  __entry->comm, __entry->pid, __entry->prio)
+);
+
+/*
+ * Tracepoint for freeing a task:
+ */
+DEFINE_EVENT(sched_process_template, sched_process_free,
+	     TP_PROTO(struct task_struct *p),
+	     TP_ARGS(p));
+	     
+
+/*
+ * Tracepoint for a task exiting:
+ */
+DEFINE_EVENT(sched_process_template, sched_process_exit,
+	     TP_PROTO(struct task_struct *p),
+	     TP_ARGS(p));
+
+/*
+ * Tracepoint for waiting on task to unschedule:
+ */
+DEFINE_EVENT(sched_process_template, sched_wait_task,
+	TP_PROTO(struct task_struct *p),
+	TP_ARGS(p));
+
+/*
+ * Tracepoint for a waiting task:
+ */
+TRACE_EVENT(sched_process_wait,
+
+	TP_PROTO(struct pid *pid),
+
+	TP_ARGS(pid),
+
+	TP_STRUCT__entry(
+		__array(	char,	comm,	TASK_COMM_LEN	)
+		__field(	pid_t,	pid			)
+		__field(	int,	prio			)
+	),
+
+	TP_fast_assign(
+		memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
+		__entry->pid		= pid_nr(pid);
+		__entry->prio		= current->prio;
+	),
+
+	TP_printk("comm=%s pid=%d prio=%d",
+		  __entry->comm, __entry->pid, __entry->prio)
+);
+
+/*
+ * Tracepoint for do_fork:
+ */
+TRACE_EVENT(sched_process_fork,
+
+	TP_PROTO(struct task_struct *parent, struct task_struct *child),
+
+	TP_ARGS(parent, child),
+
+	TP_STRUCT__entry(
+		__array(	char,	parent_comm,	TASK_COMM_LEN	)
+		__field(	pid_t,	parent_pid			)
+		__array(	char,	child_comm,	TASK_COMM_LEN	)
+		__field(	pid_t,	child_pid			)
+	),
+
+	TP_fast_assign(
+		memcpy(__entry->parent_comm, parent->comm, TASK_COMM_LEN);
+		__entry->parent_pid	= parent->pid;
+		memcpy(__entry->child_comm, child->comm, TASK_COMM_LEN);
+		__entry->child_pid	= child->pid;
+	),
+
+	TP_printk("comm=%s pid=%d child_comm=%s child_pid=%d",
+		__entry->parent_comm, __entry->parent_pid,
+		__entry->child_comm, __entry->child_pid)
+);
+
+/*
+ * Tracepoint for exec:
+ */
+TRACE_EVENT(sched_process_exec,
+
+	TP_PROTO(struct task_struct *p, pid_t old_pid,
+		 struct linux_binprm *bprm),
+
+	TP_ARGS(p, old_pid, bprm),
+
+	TP_STRUCT__entry(
+		__string(	filename,	bprm->filename	)
+		__field(	pid_t,		pid		)
+		__field(	pid_t,		old_pid		)
+	),
+
+	TP_fast_assign(
+		__assign_str(filename, bprm->filename);
+		__entry->pid		= p->pid;
+		__entry->old_pid	= old_pid;
+	),
+
+	TP_printk("filename=%s pid=%d old_pid=%d", __get_str(filename),
+		  __entry->pid, __entry->old_pid)
+);
+
+/*
+ * XXX the below sched_stat tracepoints only apply to SCHED_OTHER/BATCH/IDLE
+ *     adding sched_stat support to SCHED_FIFO/RR would be welcome.
+ */
+DECLARE_EVENT_CLASS(sched_stat_template,
+
+	TP_PROTO(struct task_struct *tsk, u64 delay),
+
+	TP_ARGS(tsk, delay),
+
+	TP_STRUCT__entry(
+		__array( char,	comm,	TASK_COMM_LEN	)
+		__field( pid_t,	pid			)
+		__field( u64,	delay			)
+	),
+
+	TP_fast_assign(
+		memcpy(__entry->comm, tsk->comm, TASK_COMM_LEN);
+		__entry->pid	= tsk->pid;
+		__entry->delay	= delay;
+	)
+	TP_perf_assign(
+		__perf_count(delay);
+	),
+
+	TP_printk("comm=%s pid=%d delay=%Lu [ns]",
+			__entry->comm, __entry->pid,
+			(unsigned long long)__entry->delay)
+);
+
+
+/*
+ * Tracepoint for accounting wait time (time the task is runnable
+ * but not actually running due to scheduler contention).
+ */
+DEFINE_EVENT(sched_stat_template, sched_stat_wait,
+	     TP_PROTO(struct task_struct *tsk, u64 delay),
+	     TP_ARGS(tsk, delay));
+
+/*
+ * Tracepoint for accounting sleep time (time the task is not runnable,
+ * including iowait, see below).
+ */
+DEFINE_EVENT(sched_stat_template, sched_stat_sleep,
+	     TP_PROTO(struct task_struct *tsk, u64 delay),
+	     TP_ARGS(tsk, delay));
+
+/*
+ * Tracepoint for accounting iowait time (time the task is not runnable
+ * due to waiting on IO to complete).
+ */
+DEFINE_EVENT(sched_stat_template, sched_stat_iowait,
+	     TP_PROTO(struct task_struct *tsk, u64 delay),
+	     TP_ARGS(tsk, delay));
+
+/*
+ * Tracepoint for accounting blocked time (time the task is in uninterruptible).
+ */
+DEFINE_EVENT(sched_stat_template, sched_stat_blocked,
+	     TP_PROTO(struct task_struct *tsk, u64 delay),
+	     TP_ARGS(tsk, delay));
+
+/*
+ * Tracepoint for accounting runtime (time the task is executing
+ * on a CPU).
+ */
+TRACE_EVENT(sched_stat_runtime,
+
+	TP_PROTO(struct task_struct *tsk, u64 runtime, u64 vruntime),
+
+	TP_ARGS(tsk, runtime, vruntime),
+
+	TP_STRUCT__entry(
+		__array( char,	comm,	TASK_COMM_LEN	)
+		__field( pid_t,	pid			)
+		__field( u64,	runtime			)
+		__field( u64,	vruntime			)
+	),
+
+	TP_fast_assign(
+		memcpy(__entry->comm, tsk->comm, TASK_COMM_LEN);
+		__entry->pid		= tsk->pid;
+		__entry->runtime	= runtime;
+		__entry->vruntime	= vruntime;
+	)
+	TP_perf_assign(
+		__perf_count(runtime);
+	),
+
+	TP_printk("comm=%s pid=%d runtime=%Lu [ns] vruntime=%Lu [ns]",
+			__entry->comm, __entry->pid,
+			(unsigned long long)__entry->runtime,
+			(unsigned long long)__entry->vruntime)
+);
+
+/*
+ * Tracepoint for showing priority inheritance modifying a tasks
+ * priority.
+ */
+TRACE_EVENT(sched_pi_setprio,
+
+	TP_PROTO(struct task_struct *tsk, int newprio),
+
+	TP_ARGS(tsk, newprio),
+
+	TP_STRUCT__entry(
+		__array( char,	comm,	TASK_COMM_LEN	)
+		__field( pid_t,	pid			)
+		__field( int,	oldprio			)
+		__field( int,	newprio			)
+	),
+
+	TP_fast_assign(
+		memcpy(__entry->comm, tsk->comm, TASK_COMM_LEN);
+		__entry->pid		= tsk->pid;
+		__entry->oldprio	= tsk->prio;
+		__entry->newprio	= newprio;
+	),
+
+	TP_printk("comm=%s pid=%d oldprio=%d newprio=%d",
+			__entry->comm, __entry->pid,
+			__entry->oldprio, __entry->newprio)
+);
+
+#endif /* _TRACE_SCHED_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/scsi.h b/include/trace/events/scsi.h
new file mode 100644
index 00000000..db6c9351
--- /dev/null
+++ b/include/trace/events/scsi.h
@@ -0,0 +1,365 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM scsi
+
+#if !defined(_TRACE_SCSI_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_SCSI_H
+
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_host.h>
+#include <linux/tracepoint.h>
+#include <linux/trace_seq.h>
+
+#define scsi_opcode_name(opcode)	{ opcode, #opcode }
+#define show_opcode_name(val)					\
+	__print_symbolic(val,					\
+		scsi_opcode_name(TEST_UNIT_READY),		\
+		scsi_opcode_name(REZERO_UNIT),			\
+		scsi_opcode_name(REQUEST_SENSE),		\
+		scsi_opcode_name(FORMAT_UNIT),			\
+		scsi_opcode_name(READ_BLOCK_LIMITS),		\
+		scsi_opcode_name(REASSIGN_BLOCKS),		\
+		scsi_opcode_name(INITIALIZE_ELEMENT_STATUS),	\
+		scsi_opcode_name(READ_6),			\
+		scsi_opcode_name(WRITE_6),			\
+		scsi_opcode_name(SEEK_6),			\
+		scsi_opcode_name(READ_REVERSE),			\
+		scsi_opcode_name(WRITE_FILEMARKS),		\
+		scsi_opcode_name(SPACE),			\
+		scsi_opcode_name(INQUIRY),			\
+		scsi_opcode_name(RECOVER_BUFFERED_DATA),	\
+		scsi_opcode_name(MODE_SELECT),			\
+		scsi_opcode_name(RESERVE),			\
+		scsi_opcode_name(RELEASE),			\
+		scsi_opcode_name(COPY),				\
+		scsi_opcode_name(ERASE),			\
+		scsi_opcode_name(MODE_SENSE),			\
+		scsi_opcode_name(START_STOP),			\
+		scsi_opcode_name(RECEIVE_DIAGNOSTIC),		\
+		scsi_opcode_name(SEND_DIAGNOSTIC),		\
+		scsi_opcode_name(ALLOW_MEDIUM_REMOVAL),		\
+		scsi_opcode_name(SET_WINDOW),			\
+		scsi_opcode_name(READ_CAPACITY),		\
+		scsi_opcode_name(READ_10),			\
+		scsi_opcode_name(WRITE_10),			\
+		scsi_opcode_name(SEEK_10),			\
+		scsi_opcode_name(POSITION_TO_ELEMENT),		\
+		scsi_opcode_name(WRITE_VERIFY),			\
+		scsi_opcode_name(VERIFY),			\
+		scsi_opcode_name(SEARCH_HIGH),			\
+		scsi_opcode_name(SEARCH_EQUAL),			\
+		scsi_opcode_name(SEARCH_LOW),			\
+		scsi_opcode_name(SET_LIMITS),			\
+		scsi_opcode_name(PRE_FETCH),			\
+		scsi_opcode_name(READ_POSITION),		\
+		scsi_opcode_name(SYNCHRONIZE_CACHE),		\
+		scsi_opcode_name(LOCK_UNLOCK_CACHE),		\
+		scsi_opcode_name(READ_DEFECT_DATA),		\
+		scsi_opcode_name(MEDIUM_SCAN),			\
+		scsi_opcode_name(COMPARE),			\
+		scsi_opcode_name(COPY_VERIFY),			\
+		scsi_opcode_name(WRITE_BUFFER),			\
+		scsi_opcode_name(READ_BUFFER),			\
+		scsi_opcode_name(UPDATE_BLOCK),			\
+		scsi_opcode_name(READ_LONG),			\
+		scsi_opcode_name(WRITE_LONG),			\
+		scsi_opcode_name(CHANGE_DEFINITION),		\
+		scsi_opcode_name(WRITE_SAME),			\
+		scsi_opcode_name(UNMAP),			\
+		scsi_opcode_name(READ_TOC),			\
+		scsi_opcode_name(LOG_SELECT),			\
+		scsi_opcode_name(LOG_SENSE),			\
+		scsi_opcode_name(XDWRITEREAD_10),		\
+		scsi_opcode_name(MODE_SELECT_10),		\
+		scsi_opcode_name(RESERVE_10),			\
+		scsi_opcode_name(RELEASE_10),			\
+		scsi_opcode_name(MODE_SENSE_10),		\
+		scsi_opcode_name(PERSISTENT_RESERVE_IN),	\
+		scsi_opcode_name(PERSISTENT_RESERVE_OUT),	\
+		scsi_opcode_name(VARIABLE_LENGTH_CMD),		\
+		scsi_opcode_name(REPORT_LUNS),			\
+		scsi_opcode_name(MAINTENANCE_IN),		\
+		scsi_opcode_name(MAINTENANCE_OUT),		\
+		scsi_opcode_name(MOVE_MEDIUM),			\
+		scsi_opcode_name(EXCHANGE_MEDIUM),		\
+		scsi_opcode_name(READ_12),			\
+		scsi_opcode_name(WRITE_12),			\
+		scsi_opcode_name(WRITE_VERIFY_12),		\
+		scsi_opcode_name(SEARCH_HIGH_12),		\
+		scsi_opcode_name(SEARCH_EQUAL_12),		\
+		scsi_opcode_name(SEARCH_LOW_12),		\
+		scsi_opcode_name(READ_ELEMENT_STATUS),		\
+		scsi_opcode_name(SEND_VOLUME_TAG),		\
+		scsi_opcode_name(WRITE_LONG_2),			\
+		scsi_opcode_name(READ_16),			\
+		scsi_opcode_name(WRITE_16),			\
+		scsi_opcode_name(VERIFY_16),			\
+		scsi_opcode_name(WRITE_SAME_16),		\
+		scsi_opcode_name(SERVICE_ACTION_IN),		\
+		scsi_opcode_name(SAI_READ_CAPACITY_16),		\
+		scsi_opcode_name(SAI_GET_LBA_STATUS),		\
+		scsi_opcode_name(MI_REPORT_TARGET_PGS),		\
+		scsi_opcode_name(MO_SET_TARGET_PGS),		\
+		scsi_opcode_name(READ_32),			\
+		scsi_opcode_name(WRITE_32),			\
+		scsi_opcode_name(WRITE_SAME_32),		\
+		scsi_opcode_name(ATA_16),			\
+		scsi_opcode_name(ATA_12))
+
+#define scsi_hostbyte_name(result)	{ result, #result }
+#define show_hostbyte_name(val)					\
+	__print_symbolic(val,					\
+		scsi_hostbyte_name(DID_OK),			\
+		scsi_hostbyte_name(DID_NO_CONNECT),		\
+		scsi_hostbyte_name(DID_BUS_BUSY),		\
+		scsi_hostbyte_name(DID_TIME_OUT),		\
+		scsi_hostbyte_name(DID_BAD_TARGET),		\
+		scsi_hostbyte_name(DID_ABORT),			\
+		scsi_hostbyte_name(DID_PARITY),			\
+		scsi_hostbyte_name(DID_ERROR),			\
+		scsi_hostbyte_name(DID_RESET),			\
+		scsi_hostbyte_name(DID_BAD_INTR),		\
+		scsi_hostbyte_name(DID_PASSTHROUGH),		\
+		scsi_hostbyte_name(DID_SOFT_ERROR),		\
+		scsi_hostbyte_name(DID_IMM_RETRY),		\
+		scsi_hostbyte_name(DID_REQUEUE),		\
+		scsi_hostbyte_name(DID_TRANSPORT_DISRUPTED),	\
+		scsi_hostbyte_name(DID_TRANSPORT_FAILFAST))
+
+#define scsi_driverbyte_name(result)	{ result, #result }
+#define show_driverbyte_name(val)				\
+	__print_symbolic(val,					\
+		scsi_driverbyte_name(DRIVER_OK),		\
+		scsi_driverbyte_name(DRIVER_BUSY),		\
+		scsi_driverbyte_name(DRIVER_SOFT),		\
+		scsi_driverbyte_name(DRIVER_MEDIA),		\
+		scsi_driverbyte_name(DRIVER_ERROR),		\
+		scsi_driverbyte_name(DRIVER_INVALID),		\
+		scsi_driverbyte_name(DRIVER_TIMEOUT),		\
+		scsi_driverbyte_name(DRIVER_HARD),		\
+		scsi_driverbyte_name(DRIVER_SENSE))
+
+#define scsi_msgbyte_name(result)	{ result, #result }
+#define show_msgbyte_name(val)					\
+	__print_symbolic(val,					\
+		scsi_msgbyte_name(COMMAND_COMPLETE),		\
+		scsi_msgbyte_name(EXTENDED_MESSAGE),		\
+		scsi_msgbyte_name(SAVE_POINTERS),		\
+		scsi_msgbyte_name(RESTORE_POINTERS),		\
+		scsi_msgbyte_name(DISCONNECT),			\
+		scsi_msgbyte_name(INITIATOR_ERROR),		\
+		scsi_msgbyte_name(ABORT_TASK_SET),		\
+		scsi_msgbyte_name(MESSAGE_REJECT),		\
+		scsi_msgbyte_name(NOP),				\
+		scsi_msgbyte_name(MSG_PARITY_ERROR),		\
+		scsi_msgbyte_name(LINKED_CMD_COMPLETE),		\
+		scsi_msgbyte_name(LINKED_FLG_CMD_COMPLETE),	\
+		scsi_msgbyte_name(TARGET_RESET),		\
+		scsi_msgbyte_name(ABORT_TASK),			\
+		scsi_msgbyte_name(CLEAR_TASK_SET),		\
+		scsi_msgbyte_name(INITIATE_RECOVERY),		\
+		scsi_msgbyte_name(RELEASE_RECOVERY),		\
+		scsi_msgbyte_name(CLEAR_ACA),			\
+		scsi_msgbyte_name(LOGICAL_UNIT_RESET),		\
+		scsi_msgbyte_name(SIMPLE_QUEUE_TAG),		\
+		scsi_msgbyte_name(HEAD_OF_QUEUE_TAG),		\
+		scsi_msgbyte_name(ORDERED_QUEUE_TAG),		\
+		scsi_msgbyte_name(IGNORE_WIDE_RESIDUE),		\
+		scsi_msgbyte_name(ACA),				\
+		scsi_msgbyte_name(QAS_REQUEST),			\
+		scsi_msgbyte_name(BUS_DEVICE_RESET),		\
+		scsi_msgbyte_name(ABORT))
+
+#define scsi_statusbyte_name(result)	{ result, #result }
+#define show_statusbyte_name(val)				\
+	__print_symbolic(val,					\
+		scsi_statusbyte_name(SAM_STAT_GOOD),		\
+		scsi_statusbyte_name(SAM_STAT_CHECK_CONDITION),	\
+		scsi_statusbyte_name(SAM_STAT_CONDITION_MET),	\
+		scsi_statusbyte_name(SAM_STAT_BUSY),		\
+		scsi_statusbyte_name(SAM_STAT_INTERMEDIATE),	\
+		scsi_statusbyte_name(SAM_STAT_INTERMEDIATE_CONDITION_MET), \
+		scsi_statusbyte_name(SAM_STAT_RESERVATION_CONFLICT),	\
+		scsi_statusbyte_name(SAM_STAT_COMMAND_TERMINATED),	\
+		scsi_statusbyte_name(SAM_STAT_TASK_SET_FULL),	\
+		scsi_statusbyte_name(SAM_STAT_ACA_ACTIVE),	\
+		scsi_statusbyte_name(SAM_STAT_TASK_ABORTED))
+
+#define scsi_prot_op_name(result)	{ result, #result }
+#define show_prot_op_name(val)					\
+	__print_symbolic(val,					\
+		scsi_prot_op_name(SCSI_PROT_NORMAL),		\
+		scsi_prot_op_name(SCSI_PROT_READ_INSERT),	\
+		scsi_prot_op_name(SCSI_PROT_WRITE_STRIP),	\
+		scsi_prot_op_name(SCSI_PROT_READ_STRIP),	\
+		scsi_prot_op_name(SCSI_PROT_WRITE_INSERT),	\
+		scsi_prot_op_name(SCSI_PROT_READ_PASS),		\
+		scsi_prot_op_name(SCSI_PROT_WRITE_PASS))
+
+const char *scsi_trace_parse_cdb(struct trace_seq*, unsigned char*, int);
+#define __parse_cdb(cdb, len) scsi_trace_parse_cdb(p, cdb, len)
+
+TRACE_EVENT(scsi_dispatch_cmd_start,
+
+	TP_PROTO(struct scsi_cmnd *cmd),
+
+	TP_ARGS(cmd),
+
+	TP_STRUCT__entry(
+		__field( unsigned int,	host_no	)
+		__field( unsigned int,	channel	)
+		__field( unsigned int,	id	)
+		__field( unsigned int,	lun	)
+		__field( unsigned int,	opcode	)
+		__field( unsigned int,	cmd_len )
+		__field( unsigned int,	data_sglen )
+		__field( unsigned int,	prot_sglen )
+		__field( unsigned char,	prot_op )
+		__dynamic_array(unsigned char,	cmnd, cmd->cmd_len)
+	),
+
+	TP_fast_assign(
+		__entry->host_no	= cmd->device->host->host_no;
+		__entry->channel	= cmd->device->channel;
+		__entry->id		= cmd->device->id;
+		__entry->lun		= cmd->device->lun;
+		__entry->opcode		= cmd->cmnd[0];
+		__entry->cmd_len	= cmd->cmd_len;
+		__entry->data_sglen	= scsi_sg_count(cmd);
+		__entry->prot_sglen	= scsi_prot_sg_count(cmd);
+		__entry->prot_op	= scsi_get_prot_op(cmd);
+		memcpy(__get_dynamic_array(cmnd), cmd->cmnd, cmd->cmd_len);
+	),
+
+	TP_printk("host_no=%u channel=%u id=%u lun=%u data_sgl=%u prot_sgl=%u" \
+		  " prot_op=%s cmnd=(%s %s raw=%s)",
+		  __entry->host_no, __entry->channel, __entry->id,
+		  __entry->lun, __entry->data_sglen, __entry->prot_sglen,
+		  show_prot_op_name(__entry->prot_op),
+		  show_opcode_name(__entry->opcode),
+		  __parse_cdb(__get_dynamic_array(cmnd), __entry->cmd_len),
+		  __print_hex(__get_dynamic_array(cmnd), __entry->cmd_len))
+);
+
+TRACE_EVENT(scsi_dispatch_cmd_error,
+
+	TP_PROTO(struct scsi_cmnd *cmd, int rtn),
+
+	TP_ARGS(cmd, rtn),
+
+	TP_STRUCT__entry(
+		__field( unsigned int,	host_no	)
+		__field( unsigned int,	channel	)
+		__field( unsigned int,	id	)
+		__field( unsigned int,	lun	)
+		__field( int,		rtn	)
+		__field( unsigned int,	opcode	)
+		__field( unsigned int,	cmd_len )
+		__field( unsigned int,	data_sglen )
+		__field( unsigned int,	prot_sglen )
+		__field( unsigned char,	prot_op )
+		__dynamic_array(unsigned char,	cmnd, cmd->cmd_len)
+	),
+
+	TP_fast_assign(
+		__entry->host_no	= cmd->device->host->host_no;
+		__entry->channel	= cmd->device->channel;
+		__entry->id		= cmd->device->id;
+		__entry->lun		= cmd->device->lun;
+		__entry->rtn		= rtn;
+		__entry->opcode		= cmd->cmnd[0];
+		__entry->cmd_len	= cmd->cmd_len;
+		__entry->data_sglen	= scsi_sg_count(cmd);
+		__entry->prot_sglen	= scsi_prot_sg_count(cmd);
+		__entry->prot_op	= scsi_get_prot_op(cmd);
+		memcpy(__get_dynamic_array(cmnd), cmd->cmnd, cmd->cmd_len);
+	),
+
+	TP_printk("host_no=%u channel=%u id=%u lun=%u data_sgl=%u prot_sgl=%u" \
+		  " prot_op=%s cmnd=(%s %s raw=%s) rtn=%d",
+		  __entry->host_no, __entry->channel, __entry->id,
+		  __entry->lun, __entry->data_sglen, __entry->prot_sglen,
+		  show_prot_op_name(__entry->prot_op),
+		  show_opcode_name(__entry->opcode),
+		  __parse_cdb(__get_dynamic_array(cmnd), __entry->cmd_len),
+		  __print_hex(__get_dynamic_array(cmnd), __entry->cmd_len),
+		  __entry->rtn)
+);
+
+DECLARE_EVENT_CLASS(scsi_cmd_done_timeout_template,
+
+	TP_PROTO(struct scsi_cmnd *cmd),
+
+	TP_ARGS(cmd),
+
+	TP_STRUCT__entry(
+		__field( unsigned int,	host_no	)
+		__field( unsigned int,	channel	)
+		__field( unsigned int,	id	)
+		__field( unsigned int,	lun	)
+		__field( int,		result	)
+		__field( unsigned int,	opcode	)
+		__field( unsigned int,	cmd_len )
+		__field( unsigned int,	data_sglen )
+		__field( unsigned int,	prot_sglen )
+		__field( unsigned char,	prot_op )
+		__dynamic_array(unsigned char,	cmnd, cmd->cmd_len)
+	),
+
+	TP_fast_assign(
+		__entry->host_no	= cmd->device->host->host_no;
+		__entry->channel	= cmd->device->channel;
+		__entry->id		= cmd->device->id;
+		__entry->lun		= cmd->device->lun;
+		__entry->result		= cmd->result;
+		__entry->opcode		= cmd->cmnd[0];
+		__entry->cmd_len	= cmd->cmd_len;
+		__entry->data_sglen	= scsi_sg_count(cmd);
+		__entry->prot_sglen	= scsi_prot_sg_count(cmd);
+		__entry->prot_op	= scsi_get_prot_op(cmd);
+		memcpy(__get_dynamic_array(cmnd), cmd->cmnd, cmd->cmd_len);
+	),
+
+	TP_printk("host_no=%u channel=%u id=%u lun=%u data_sgl=%u " \
+		  "prot_sgl=%u prot_op=%s cmnd=(%s %s raw=%s) result=(driver=" \
+		  "%s host=%s message=%s status=%s)",
+		  __entry->host_no, __entry->channel, __entry->id,
+		  __entry->lun, __entry->data_sglen, __entry->prot_sglen,
+		  show_prot_op_name(__entry->prot_op),
+		  show_opcode_name(__entry->opcode),
+		  __parse_cdb(__get_dynamic_array(cmnd), __entry->cmd_len),
+		  __print_hex(__get_dynamic_array(cmnd), __entry->cmd_len),
+		  show_driverbyte_name(((__entry->result) >> 24) & 0xff),
+		  show_hostbyte_name(((__entry->result) >> 16) & 0xff),
+		  show_msgbyte_name(((__entry->result) >> 8) & 0xff),
+		  show_statusbyte_name(__entry->result & 0xff))
+);
+
+DEFINE_EVENT(scsi_cmd_done_timeout_template, scsi_dispatch_cmd_done,
+	     TP_PROTO(struct scsi_cmnd *cmd),
+	     TP_ARGS(cmd));
+
+DEFINE_EVENT(scsi_cmd_done_timeout_template, scsi_dispatch_cmd_timeout,
+	     TP_PROTO(struct scsi_cmnd *cmd),
+	     TP_ARGS(cmd));
+
+TRACE_EVENT(scsi_eh_wakeup,
+
+	TP_PROTO(struct Scsi_Host *shost),
+
+	TP_ARGS(shost),
+
+	TP_STRUCT__entry(
+		__field( unsigned int,	host_no	)
+	),
+
+	TP_fast_assign(
+		__entry->host_no	= shost->host_no;
+	),
+
+	TP_printk("host_no=%u", __entry->host_no)
+);
+
+#endif /*  _TRACE_SCSI_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/signal.h b/include/trace/events/signal.h
new file mode 100644
index 00000000..39a8a430
--- /dev/null
+++ b/include/trace/events/signal.h
@@ -0,0 +1,125 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM signal
+
+#if !defined(_TRACE_SIGNAL_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_SIGNAL_H
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/tracepoint.h>
+
+#define TP_STORE_SIGINFO(__entry, info)				\
+	do {							\
+		if (info == SEND_SIG_NOINFO ||			\
+		    info == SEND_SIG_FORCED) {			\
+			__entry->errno	= 0;			\
+			__entry->code	= SI_USER;		\
+		} else if (info == SEND_SIG_PRIV) {		\
+			__entry->errno	= 0;			\
+			__entry->code	= SI_KERNEL;		\
+		} else {					\
+			__entry->errno	= info->si_errno;	\
+			__entry->code	= info->si_code;	\
+		}						\
+	} while (0)
+
+#ifndef TRACE_HEADER_MULTI_READ
+enum {
+	TRACE_SIGNAL_DELIVERED,
+	TRACE_SIGNAL_IGNORED,
+	TRACE_SIGNAL_ALREADY_PENDING,
+	TRACE_SIGNAL_OVERFLOW_FAIL,
+	TRACE_SIGNAL_LOSE_INFO,
+};
+#endif
+
+/**
+ * signal_generate - called when a signal is generated
+ * @sig: signal number
+ * @info: pointer to struct siginfo
+ * @task: pointer to struct task_struct
+ * @group: shared or private
+ * @result: TRACE_SIGNAL_*
+ *
+ * Current process sends a 'sig' signal to 'task' process with
+ * 'info' siginfo. If 'info' is SEND_SIG_NOINFO or SEND_SIG_PRIV,
+ * 'info' is not a pointer and you can't access its field. Instead,
+ * SEND_SIG_NOINFO means that si_code is SI_USER, and SEND_SIG_PRIV
+ * means that si_code is SI_KERNEL.
+ */
+TRACE_EVENT(signal_generate,
+
+	TP_PROTO(int sig, struct siginfo *info, struct task_struct *task,
+			int group, int result),
+
+	TP_ARGS(sig, info, task, group, result),
+
+	TP_STRUCT__entry(
+		__field(	int,	sig			)
+		__field(	int,	errno			)
+		__field(	int,	code			)
+		__array(	char,	comm,	TASK_COMM_LEN	)
+		__field(	pid_t,	pid			)
+		__field(	int,	group			)
+		__field(	int,	result			)
+	),
+
+	TP_fast_assign(
+		__entry->sig	= sig;
+		TP_STORE_SIGINFO(__entry, info);
+		memcpy(__entry->comm, task->comm, TASK_COMM_LEN);
+		__entry->pid	= task->pid;
+		__entry->group	= group;
+		__entry->result	= result;
+	),
+
+	TP_printk("sig=%d errno=%d code=%d comm=%s pid=%d grp=%d res=%d",
+		  __entry->sig, __entry->errno, __entry->code,
+		  __entry->comm, __entry->pid, __entry->group,
+		  __entry->result)
+);
+
+/**
+ * signal_deliver - called when a signal is delivered
+ * @sig: signal number
+ * @info: pointer to struct siginfo
+ * @ka: pointer to struct k_sigaction
+ *
+ * A 'sig' signal is delivered to current process with 'info' siginfo,
+ * and it will be handled by 'ka'. ka->sa.sa_handler can be SIG_IGN or
+ * SIG_DFL.
+ * Note that some signals reported by signal_generate tracepoint can be
+ * lost, ignored or modified (by debugger) before hitting this tracepoint.
+ * This means, this can show which signals are actually delivered, but
+ * matching generated signals and delivered signals may not be correct.
+ */
+TRACE_EVENT(signal_deliver,
+
+	TP_PROTO(int sig, struct siginfo *info, struct k_sigaction *ka),
+
+	TP_ARGS(sig, info, ka),
+
+	TP_STRUCT__entry(
+		__field(	int,		sig		)
+		__field(	int,		errno		)
+		__field(	int,		code		)
+		__field(	unsigned long,	sa_handler	)
+		__field(	unsigned long,	sa_flags	)
+	),
+
+	TP_fast_assign(
+		__entry->sig	= sig;
+		TP_STORE_SIGINFO(__entry, info);
+		__entry->sa_handler	= (unsigned long)ka->sa.sa_handler;
+		__entry->sa_flags	= ka->sa.sa_flags;
+	),
+
+	TP_printk("sig=%d errno=%d code=%d sa_handler=%lx sa_flags=%lx",
+		  __entry->sig, __entry->errno, __entry->code,
+		  __entry->sa_handler, __entry->sa_flags)
+);
+
+#endif /* _TRACE_SIGNAL_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/skb.h b/include/trace/events/skb.h
new file mode 100644
index 00000000..0c68ae22
--- /dev/null
+++ b/include/trace/events/skb.h
@@ -0,0 +1,75 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM skb
+
+#if !defined(_TRACE_SKB_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_SKB_H
+
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/tracepoint.h>
+
+/*
+ * Tracepoint for free an sk_buff:
+ */
+TRACE_EVENT(kfree_skb,
+
+	TP_PROTO(struct sk_buff *skb, void *location),
+
+	TP_ARGS(skb, location),
+
+	TP_STRUCT__entry(
+		__field(	void *,		skbaddr		)
+		__field(	void *,		location	)
+		__field(	unsigned short,	protocol	)
+	),
+
+	TP_fast_assign(
+		__entry->skbaddr = skb;
+		__entry->location = location;
+		__entry->protocol = ntohs(skb->protocol);
+	),
+
+	TP_printk("skbaddr=%p protocol=%u location=%p",
+		__entry->skbaddr, __entry->protocol, __entry->location)
+);
+
+TRACE_EVENT(consume_skb,
+
+	TP_PROTO(struct sk_buff *skb),
+
+	TP_ARGS(skb),
+
+	TP_STRUCT__entry(
+		__field(	void *,	skbaddr	)
+	),
+
+	TP_fast_assign(
+		__entry->skbaddr = skb;
+	),
+
+	TP_printk("skbaddr=%p", __entry->skbaddr)
+);
+
+TRACE_EVENT(skb_copy_datagram_iovec,
+
+	TP_PROTO(const struct sk_buff *skb, int len),
+
+	TP_ARGS(skb, len),
+
+	TP_STRUCT__entry(
+		__field(	const void *,		skbaddr		)
+		__field(	int,			len		)
+	),
+
+	TP_fast_assign(
+		__entry->skbaddr = skb;
+		__entry->len = len;
+	),
+
+	TP_printk("skbaddr=%p len=%d", __entry->skbaddr, __entry->len)
+);
+
+#endif /* _TRACE_SKB_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/sock.h b/include/trace/events/sock.h
new file mode 100644
index 00000000..779abb91
--- /dev/null
+++ b/include/trace/events/sock.h
@@ -0,0 +1,68 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM sock
+
+#if !defined(_TRACE_SOCK_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_SOCK_H
+
+#include <net/sock.h>
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(sock_rcvqueue_full,
+
+	TP_PROTO(struct sock *sk, struct sk_buff *skb),
+
+	TP_ARGS(sk, skb),
+
+	TP_STRUCT__entry(
+		__field(int, rmem_alloc)
+		__field(unsigned int, truesize)
+		__field(int, sk_rcvbuf)
+	),
+
+	TP_fast_assign(
+		__entry->rmem_alloc = atomic_read(&sk->sk_rmem_alloc);
+		__entry->truesize   = skb->truesize;
+		__entry->sk_rcvbuf  = sk->sk_rcvbuf;
+	),
+
+	TP_printk("rmem_alloc=%d truesize=%u sk_rcvbuf=%d",
+		__entry->rmem_alloc, __entry->truesize, __entry->sk_rcvbuf)
+);
+
+TRACE_EVENT(sock_exceed_buf_limit,
+
+	TP_PROTO(struct sock *sk, struct proto *prot, long allocated),
+
+	TP_ARGS(sk, prot, allocated),
+
+	TP_STRUCT__entry(
+		__array(char, name, 32)
+		__field(long *, sysctl_mem)
+		__field(long, allocated)
+		__field(int, sysctl_rmem)
+		__field(int, rmem_alloc)
+	),
+
+	TP_fast_assign(
+		strncpy(__entry->name, prot->name, 32);
+		__entry->sysctl_mem = prot->sysctl_mem;
+		__entry->allocated = allocated;
+		__entry->sysctl_rmem = prot->sysctl_rmem[0];
+		__entry->rmem_alloc = atomic_read(&sk->sk_rmem_alloc);
+	),
+
+	TP_printk("proto:%s sysctl_mem=%ld,%ld,%ld allocated=%ld "
+		"sysctl_rmem=%d rmem_alloc=%d",
+		__entry->name,
+		__entry->sysctl_mem[0],
+		__entry->sysctl_mem[1],
+		__entry->sysctl_mem[2],
+		__entry->allocated,
+		__entry->sysctl_rmem,
+		__entry->rmem_alloc)
+);
+
+#endif /* _TRACE_SOCK_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/sunrpc.h b/include/trace/events/sunrpc.h
new file mode 100644
index 00000000..43be87d5
--- /dev/null
+++ b/include/trace/events/sunrpc.h
@@ -0,0 +1,177 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM sunrpc
+
+#if !defined(_TRACE_SUNRPC_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_SUNRPC_H
+
+#include <linux/sunrpc/sched.h>
+#include <linux/sunrpc/clnt.h>
+#include <linux/tracepoint.h>
+
+DECLARE_EVENT_CLASS(rpc_task_status,
+
+	TP_PROTO(struct rpc_task *task),
+
+	TP_ARGS(task),
+
+	TP_STRUCT__entry(
+		__field(const struct rpc_task *, task)
+		__field(const struct rpc_clnt *, clnt)
+		__field(int, status)
+	),
+
+	TP_fast_assign(
+		__entry->task = task;
+		__entry->clnt = task->tk_client;
+		__entry->status = task->tk_status;
+	),
+
+	TP_printk("task:%p@%p, status %d",__entry->task, __entry->clnt, __entry->status)
+);
+
+DEFINE_EVENT(rpc_task_status, rpc_call_status,
+	TP_PROTO(struct rpc_task *task),
+
+	TP_ARGS(task)
+);
+
+DEFINE_EVENT(rpc_task_status, rpc_bind_status,
+	TP_PROTO(struct rpc_task *task),
+
+	TP_ARGS(task)
+);
+
+TRACE_EVENT(rpc_connect_status,
+	TP_PROTO(struct rpc_task *task, int status),
+
+	TP_ARGS(task, status),
+
+	TP_STRUCT__entry(
+		__field(const struct rpc_task *, task)
+		__field(const struct rpc_clnt *, clnt)
+		__field(int, status)
+	),
+
+	TP_fast_assign(
+		__entry->task = task;
+		__entry->clnt = task->tk_client;
+		__entry->status = status;
+	),
+
+	TP_printk("task:%p@%p, status %d",__entry->task, __entry->clnt, __entry->status)
+);
+
+DECLARE_EVENT_CLASS(rpc_task_running,
+
+	TP_PROTO(const struct rpc_clnt *clnt, const struct rpc_task *task, const void *action),
+
+	TP_ARGS(clnt, task, action),
+
+	TP_STRUCT__entry(
+		__field(const struct rpc_clnt *, clnt)
+		__field(const struct rpc_task *, task)
+		__field(const void *, action)
+		__field(unsigned long, runstate)
+		__field(int, status)
+		__field(unsigned short, flags)
+		),
+
+	TP_fast_assign(
+		__entry->clnt = clnt;
+		__entry->task = task;
+		__entry->action = action;
+		__entry->runstate = task->tk_runstate;
+		__entry->status = task->tk_status;
+		__entry->flags = task->tk_flags;
+		),
+
+	TP_printk("task:%p@%p flags=%4.4x state=%4.4lx status=%d action=%pf",
+		__entry->task,
+		__entry->clnt,
+		__entry->flags,
+		__entry->runstate,
+		__entry->status,
+		__entry->action
+		)
+);
+
+DEFINE_EVENT(rpc_task_running, rpc_task_begin,
+
+	TP_PROTO(const struct rpc_clnt *clnt, const struct rpc_task *task, const void *action),
+
+	TP_ARGS(clnt, task, action)
+
+);
+
+DEFINE_EVENT(rpc_task_running, rpc_task_run_action,
+
+	TP_PROTO(const struct rpc_clnt *clnt, const struct rpc_task *task, const void *action),
+
+	TP_ARGS(clnt, task, action)
+
+);
+
+DEFINE_EVENT(rpc_task_running, rpc_task_complete,
+
+	TP_PROTO(const struct rpc_clnt *clnt, const struct rpc_task *task, const void *action),
+
+	TP_ARGS(clnt, task, action)
+
+);
+
+DECLARE_EVENT_CLASS(rpc_task_queued,
+
+	TP_PROTO(const struct rpc_clnt *clnt, const struct rpc_task *task, const struct rpc_wait_queue *q),
+
+	TP_ARGS(clnt, task, q),
+
+	TP_STRUCT__entry(
+		__field(const struct rpc_clnt *, clnt)
+		__field(const struct rpc_task *, task)
+		__field(unsigned long, timeout)
+		__field(unsigned long, runstate)
+		__field(int, status)
+		__field(unsigned short, flags)
+		__string(q_name, rpc_qname(q))
+		),
+
+	TP_fast_assign(
+		__entry->clnt = clnt;
+		__entry->task = task;
+		__entry->timeout = task->tk_timeout;
+		__entry->runstate = task->tk_runstate;
+		__entry->status = task->tk_status;
+		__entry->flags = task->tk_flags;
+		__assign_str(q_name, rpc_qname(q));
+		),
+
+	TP_printk("task:%p@%p flags=%4.4x state=%4.4lx status=%d timeout=%lu queue=%s",
+		__entry->task,
+		__entry->clnt,
+		__entry->flags,
+		__entry->runstate,
+		__entry->status,
+		__entry->timeout,
+		__get_str(q_name)
+		)
+);
+
+DEFINE_EVENT(rpc_task_queued, rpc_task_sleep,
+
+	TP_PROTO(const struct rpc_clnt *clnt, const struct rpc_task *task, const struct rpc_wait_queue *q),
+
+	TP_ARGS(clnt, task, q)
+
+);
+
+DEFINE_EVENT(rpc_task_queued, rpc_task_wakeup,
+
+	TP_PROTO(const struct rpc_clnt *clnt, const struct rpc_task *task, const struct rpc_wait_queue *q),
+
+	TP_ARGS(clnt, task, q)
+
+);
+
+#endif /* _TRACE_SUNRPC_H */
+
+#include <trace/define_trace.h>
diff --git a/include/trace/events/sync.h b/include/trace/events/sync.h
new file mode 100644
index 00000000..f31bc63c
--- /dev/null
+++ b/include/trace/events/sync.h
@@ -0,0 +1,82 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM sync
+
+#if !defined(_TRACE_SYNC_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_SYNC_H
+
+#include <linux/sync.h>
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(sync_timeline,
+	    TP_PROTO(struct sync_timeline *timeline),
+
+	    TP_ARGS(timeline),
+
+	    TP_STRUCT__entry(
+		    __string(name, timeline->name)
+		    __array(char, value, 32)
+		    ),
+
+	    TP_fast_assign(
+		    __assign_str(name, timeline->name);
+		    if (timeline->ops->timeline_value_str) {
+			    timeline->ops->timeline_value_str(timeline,
+							      __entry->value,
+							      sizeof(__entry->value));
+		    } else {
+			    __entry->value[0] = '\0';
+		    }
+		    ),
+
+	    TP_printk("name=%s value=%s", __get_str(name), __entry->value)
+);
+
+TRACE_EVENT(sync_wait,
+	    TP_PROTO(struct sync_fence *fence, int begin),
+
+	    TP_ARGS(fence, begin),
+
+	    TP_STRUCT__entry(
+		    __string(name, fence->name)
+		    __field(s32, status)
+		    __field(u32, begin)
+		    ),
+
+	    TP_fast_assign(
+		    __assign_str(name, fence->name);
+		    __entry->status = fence->status;
+		    __entry->begin = begin;
+		    ),
+
+	    TP_printk("%s name=%s state=%d", __entry->begin ? "begin" : "end",
+		      __get_str(name), __entry->status)
+);
+
+TRACE_EVENT(sync_pt,
+	    TP_PROTO(struct sync_pt *pt),
+
+	    TP_ARGS(pt),
+
+	    TP_STRUCT__entry(
+		    __string(timeline, pt->parent->name)
+		    __array(char, value, 32)
+		    ),
+
+	    TP_fast_assign(
+		    __assign_str(timeline, pt->parent->name);
+		    if (pt->parent->ops->pt_value_str) {
+			    pt->parent->ops->pt_value_str(pt,
+							__entry->value,
+							sizeof(__entry->value));
+		    } else {
+			    __entry->value[0] = '\0';
+		    }
+		    ),
+
+	    TP_printk("name=%s value=%s", __get_str(timeline), __entry->value)
+	);
+
+#endif /* if !defined(_TRACE_SYNC_H) || defined(TRACE_HEADER_MULTI_READ) */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/syscalls.h b/include/trace/events/syscalls.h
new file mode 100644
index 00000000..5a4c04a7
--- /dev/null
+++ b/include/trace/events/syscalls.h
@@ -0,0 +1,75 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM raw_syscalls
+#define TRACE_INCLUDE_FILE syscalls
+
+#if !defined(_TRACE_EVENTS_SYSCALLS_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_EVENTS_SYSCALLS_H
+
+#include <linux/tracepoint.h>
+
+#include <asm/ptrace.h>
+#include <asm/syscall.h>
+
+
+#ifdef CONFIG_HAVE_SYSCALL_TRACEPOINTS
+
+extern void syscall_regfunc(void);
+extern void syscall_unregfunc(void);
+
+TRACE_EVENT_FN(sys_enter,
+
+	TP_PROTO(struct pt_regs *regs, long id),
+
+	TP_ARGS(regs, id),
+
+	TP_STRUCT__entry(
+		__field(	long,		id		)
+		__array(	unsigned long,	args,	6	)
+	),
+
+	TP_fast_assign(
+		__entry->id	= id;
+		syscall_get_arguments(current, regs, 0, 6, __entry->args);
+	),
+
+	TP_printk("NR %ld (%lx, %lx, %lx, %lx, %lx, %lx)",
+		  __entry->id,
+		  __entry->args[0], __entry->args[1], __entry->args[2],
+		  __entry->args[3], __entry->args[4], __entry->args[5]),
+
+	syscall_regfunc, syscall_unregfunc
+);
+
+TRACE_EVENT_FLAGS(sys_enter, TRACE_EVENT_FL_CAP_ANY)
+
+TRACE_EVENT_FN(sys_exit,
+
+	TP_PROTO(struct pt_regs *regs, long ret),
+
+	TP_ARGS(regs, ret),
+
+	TP_STRUCT__entry(
+		__field(	long,	id	)
+		__field(	long,	ret	)
+	),
+
+	TP_fast_assign(
+		__entry->id	= syscall_get_nr(current, regs);
+		__entry->ret	= ret;
+	),
+
+	TP_printk("NR %ld = %ld",
+		  __entry->id, __entry->ret),
+
+	syscall_regfunc, syscall_unregfunc
+);
+
+TRACE_EVENT_FLAGS(sys_exit, TRACE_EVENT_FL_CAP_ANY)
+
+#endif /* CONFIG_HAVE_SYSCALL_TRACEPOINTS */
+
+#endif /* _TRACE_EVENTS_SYSCALLS_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
+
diff --git a/include/trace/events/task.h b/include/trace/events/task.h
new file mode 100644
index 00000000..b53add02
--- /dev/null
+++ b/include/trace/events/task.h
@@ -0,0 +1,61 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM task
+
+#if !defined(_TRACE_TASK_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_TASK_H
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(task_newtask,
+
+	TP_PROTO(struct task_struct *task, unsigned long clone_flags),
+
+	TP_ARGS(task, clone_flags),
+
+	TP_STRUCT__entry(
+		__field(	pid_t,	pid)
+		__array(	char,	comm, TASK_COMM_LEN)
+		__field( unsigned long, clone_flags)
+		__field(	int,    oom_score_adj)
+	),
+
+	TP_fast_assign(
+		__entry->pid = task->pid;
+		memcpy(__entry->comm, task->comm, TASK_COMM_LEN);
+		__entry->clone_flags = clone_flags;
+		__entry->oom_score_adj = task->signal->oom_score_adj;
+	),
+
+	TP_printk("pid=%d comm=%s clone_flags=%lx oom_score_adj=%d",
+		__entry->pid, __entry->comm,
+		__entry->clone_flags, __entry->oom_score_adj)
+);
+
+TRACE_EVENT(task_rename,
+
+	TP_PROTO(struct task_struct *task, char *comm),
+
+	TP_ARGS(task, comm),
+
+	TP_STRUCT__entry(
+		__field(	pid_t,	pid)
+		__array(	char, oldcomm,  TASK_COMM_LEN)
+		__array(	char, newcomm,  TASK_COMM_LEN)
+		__field(	int, oom_score_adj)
+	),
+
+	TP_fast_assign(
+		__entry->pid = task->pid;
+		memcpy(entry->oldcomm, task->comm, TASK_COMM_LEN);
+		memcpy(entry->newcomm, comm, TASK_COMM_LEN);
+		__entry->oom_score_adj = task->signal->oom_score_adj;
+	),
+
+	TP_printk("pid=%d oldcomm=%s newcomm=%s oom_score_adj=%d",
+		__entry->pid, __entry->oldcomm,
+		__entry->newcomm, __entry->oom_score_adj)
+);
+
+#endif
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/timer.h b/include/trace/events/timer.h
new file mode 100644
index 00000000..425bcfe5
--- /dev/null
+++ b/include/trace/events/timer.h
@@ -0,0 +1,329 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM timer
+
+#if !defined(_TRACE_TIMER_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_TIMER_H
+
+#include <linux/tracepoint.h>
+#include <linux/hrtimer.h>
+#include <linux/timer.h>
+
+DECLARE_EVENT_CLASS(timer_class,
+
+	TP_PROTO(struct timer_list *timer),
+
+	TP_ARGS(timer),
+
+	TP_STRUCT__entry(
+		__field( void *,	timer	)
+	),
+
+	TP_fast_assign(
+		__entry->timer	= timer;
+	),
+
+	TP_printk("timer=%p", __entry->timer)
+);
+
+/**
+ * timer_init - called when the timer is initialized
+ * @timer:	pointer to struct timer_list
+ */
+DEFINE_EVENT(timer_class, timer_init,
+
+	TP_PROTO(struct timer_list *timer),
+
+	TP_ARGS(timer)
+);
+
+/**
+ * timer_start - called when the timer is started
+ * @timer:	pointer to struct timer_list
+ * @expires:	the timers expiry time
+ */
+TRACE_EVENT(timer_start,
+
+	TP_PROTO(struct timer_list *timer, unsigned long expires),
+
+	TP_ARGS(timer, expires),
+
+	TP_STRUCT__entry(
+		__field( void *,	timer		)
+		__field( void *,	function	)
+		__field( unsigned long,	expires		)
+		__field( unsigned long,	now		)
+	),
+
+	TP_fast_assign(
+		__entry->timer		= timer;
+		__entry->function	= timer->function;
+		__entry->expires	= expires;
+		__entry->now		= jiffies;
+	),
+
+	TP_printk("timer=%p function=%pf expires=%lu [timeout=%ld]",
+		  __entry->timer, __entry->function, __entry->expires,
+		  (long)__entry->expires - __entry->now)
+);
+
+/**
+ * timer_expire_entry - called immediately before the timer callback
+ * @timer:	pointer to struct timer_list
+ *
+ * Allows to determine the timer latency.
+ */
+TRACE_EVENT(timer_expire_entry,
+
+	TP_PROTO(struct timer_list *timer),
+
+	TP_ARGS(timer),
+
+	TP_STRUCT__entry(
+		__field( void *,	timer	)
+		__field( unsigned long,	now	)
+		__field( void *,	function)
+	),
+
+	TP_fast_assign(
+		__entry->timer		= timer;
+		__entry->now		= jiffies;
+		__entry->function	= timer->function;
+	),
+
+	TP_printk("timer=%p function=%pf now=%lu", __entry->timer, __entry->function,__entry->now)
+);
+
+/**
+ * timer_expire_exit - called immediately after the timer callback returns
+ * @timer:	pointer to struct timer_list
+ *
+ * When used in combination with the timer_expire_entry tracepoint we can
+ * determine the runtime of the timer callback function.
+ *
+ * NOTE: Do NOT derefernce timer in TP_fast_assign. The pointer might
+ * be invalid. We solely track the pointer.
+ */
+DEFINE_EVENT(timer_class, timer_expire_exit,
+
+	TP_PROTO(struct timer_list *timer),
+
+	TP_ARGS(timer)
+);
+
+/**
+ * timer_cancel - called when the timer is canceled
+ * @timer:	pointer to struct timer_list
+ */
+DEFINE_EVENT(timer_class, timer_cancel,
+
+	TP_PROTO(struct timer_list *timer),
+
+	TP_ARGS(timer)
+);
+
+/**
+ * hrtimer_init - called when the hrtimer is initialized
+ * @timer:	pointer to struct hrtimer
+ * @clockid:	the hrtimers clock
+ * @mode:	the hrtimers mode
+ */
+TRACE_EVENT(hrtimer_init,
+
+	TP_PROTO(struct hrtimer *hrtimer, clockid_t clockid,
+		 enum hrtimer_mode mode),
+
+	TP_ARGS(hrtimer, clockid, mode),
+
+	TP_STRUCT__entry(
+		__field( void *,		hrtimer		)
+		__field( clockid_t,		clockid		)
+		__field( enum hrtimer_mode,	mode		)
+	),
+
+	TP_fast_assign(
+		__entry->hrtimer	= hrtimer;
+		__entry->clockid	= clockid;
+		__entry->mode		= mode;
+	),
+
+	TP_printk("hrtimer=%p clockid=%s mode=%s", __entry->hrtimer,
+		  __entry->clockid == CLOCK_REALTIME ?
+			"CLOCK_REALTIME" : "CLOCK_MONOTONIC",
+		  __entry->mode == HRTIMER_MODE_ABS ?
+			"HRTIMER_MODE_ABS" : "HRTIMER_MODE_REL")
+);
+
+/**
+ * hrtimer_start - called when the hrtimer is started
+ * @timer: pointer to struct hrtimer
+ */
+TRACE_EVENT(hrtimer_start,
+
+	TP_PROTO(struct hrtimer *hrtimer),
+
+	TP_ARGS(hrtimer),
+
+	TP_STRUCT__entry(
+		__field( void *,	hrtimer		)
+		__field( void *,	function	)
+		__field( s64,		expires		)
+		__field( s64,		softexpires	)
+	),
+
+	TP_fast_assign(
+		__entry->hrtimer	= hrtimer;
+		__entry->function	= hrtimer->function;
+		__entry->expires	= hrtimer_get_expires(hrtimer).tv64;
+		__entry->softexpires	= hrtimer_get_softexpires(hrtimer).tv64;
+	),
+
+	TP_printk("hrtimer=%p function=%pf expires=%llu softexpires=%llu",
+		  __entry->hrtimer, __entry->function,
+		  (unsigned long long)ktime_to_ns((ktime_t) {
+				  .tv64 = __entry->expires }),
+		  (unsigned long long)ktime_to_ns((ktime_t) {
+				  .tv64 = __entry->softexpires }))
+);
+
+/**
+ * htimmer_expire_entry - called immediately before the hrtimer callback
+ * @timer:	pointer to struct hrtimer
+ * @now:	pointer to variable which contains current time of the
+ *		timers base.
+ *
+ * Allows to determine the timer latency.
+ */
+TRACE_EVENT(hrtimer_expire_entry,
+
+	TP_PROTO(struct hrtimer *hrtimer, ktime_t *now),
+
+	TP_ARGS(hrtimer, now),
+
+	TP_STRUCT__entry(
+		__field( void *,	hrtimer	)
+		__field( s64,		now	)
+		__field( void *,	function)
+	),
+
+	TP_fast_assign(
+		__entry->hrtimer	= hrtimer;
+		__entry->now		= now->tv64;
+		__entry->function	= hrtimer->function;
+	),
+
+	TP_printk("hrtimer=%p function=%pf now=%llu", __entry->hrtimer, __entry->function,
+		  (unsigned long long)ktime_to_ns((ktime_t) { .tv64 = __entry->now }))
+ );
+
+DECLARE_EVENT_CLASS(hrtimer_class,
+
+	TP_PROTO(struct hrtimer *hrtimer),
+
+	TP_ARGS(hrtimer),
+
+	TP_STRUCT__entry(
+		__field( void *,	hrtimer	)
+	),
+
+	TP_fast_assign(
+		__entry->hrtimer	= hrtimer;
+	),
+
+	TP_printk("hrtimer=%p", __entry->hrtimer)
+);
+
+/**
+ * hrtimer_expire_exit - called immediately after the hrtimer callback returns
+ * @timer:	pointer to struct hrtimer
+ *
+ * When used in combination with the hrtimer_expire_entry tracepoint we can
+ * determine the runtime of the callback function.
+ */
+DEFINE_EVENT(hrtimer_class, hrtimer_expire_exit,
+
+	TP_PROTO(struct hrtimer *hrtimer),
+
+	TP_ARGS(hrtimer)
+);
+
+/**
+ * hrtimer_cancel - called when the hrtimer is canceled
+ * @hrtimer:	pointer to struct hrtimer
+ */
+DEFINE_EVENT(hrtimer_class, hrtimer_cancel,
+
+	TP_PROTO(struct hrtimer *hrtimer),
+
+	TP_ARGS(hrtimer)
+);
+
+/**
+ * itimer_state - called when itimer is started or canceled
+ * @which:	name of the interval timer
+ * @value:	the itimers value, itimer is canceled if value->it_value is
+ *		zero, otherwise it is started
+ * @expires:	the itimers expiry time
+ */
+TRACE_EVENT(itimer_state,
+
+	TP_PROTO(int which, const struct itimerval *const value,
+		 cputime_t expires),
+
+	TP_ARGS(which, value, expires),
+
+	TP_STRUCT__entry(
+		__field(	int,		which		)
+		__field(	cputime_t,	expires		)
+		__field(	long,		value_sec	)
+		__field(	long,		value_usec	)
+		__field(	long,		interval_sec	)
+		__field(	long,		interval_usec	)
+	),
+
+	TP_fast_assign(
+		__entry->which		= which;
+		__entry->expires	= expires;
+		__entry->value_sec	= value->it_value.tv_sec;
+		__entry->value_usec	= value->it_value.tv_usec;
+		__entry->interval_sec	= value->it_interval.tv_sec;
+		__entry->interval_usec	= value->it_interval.tv_usec;
+	),
+
+	TP_printk("which=%d expires=%llu it_value=%ld.%ld it_interval=%ld.%ld",
+		  __entry->which, (unsigned long long)__entry->expires,
+		  __entry->value_sec, __entry->value_usec,
+		  __entry->interval_sec, __entry->interval_usec)
+);
+
+/**
+ * itimer_expire - called when itimer expires
+ * @which:	type of the interval timer
+ * @pid:	pid of the process which owns the timer
+ * @now:	current time, used to calculate the latency of itimer
+ */
+TRACE_EVENT(itimer_expire,
+
+	TP_PROTO(int which, struct pid *pid, cputime_t now),
+
+	TP_ARGS(which, pid, now),
+
+	TP_STRUCT__entry(
+		__field( int ,		which	)
+		__field( pid_t,		pid	)
+		__field( cputime_t,	now	)
+	),
+
+	TP_fast_assign(
+		__entry->which	= which;
+		__entry->now	= now;
+		__entry->pid	= pid_nr(pid);
+	),
+
+	TP_printk("which=%d pid=%d now=%llu", __entry->which,
+		  (int) __entry->pid, (unsigned long long)__entry->now)
+);
+
+#endif /*  _TRACE_TIMER_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/udp.h b/include/trace/events/udp.h
new file mode 100644
index 00000000..a664bb94
--- /dev/null
+++ b/include/trace/events/udp.h
@@ -0,0 +1,32 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM udp
+
+#if !defined(_TRACE_UDP_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_UDP_H
+
+#include <linux/udp.h>
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(udp_fail_queue_rcv_skb,
+
+	TP_PROTO(int rc, struct sock *sk),
+
+	TP_ARGS(rc, sk),
+
+	TP_STRUCT__entry(
+		__field(int, rc)
+		__field(__u16, lport)
+	),
+
+	TP_fast_assign(
+		__entry->rc = rc;
+		__entry->lport = inet_sk(sk)->inet_num;
+	),
+
+	TP_printk("rc=%d port=%hu", __entry->rc, __entry->lport)
+);
+
+#endif /* _TRACE_UDP_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/vmscan.h b/include/trace/events/vmscan.h
new file mode 100644
index 00000000..f64560e2
--- /dev/null
+++ b/include/trace/events/vmscan.h
@@ -0,0 +1,483 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM vmscan
+
+#if !defined(_TRACE_VMSCAN_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_VMSCAN_H
+
+#include <linux/types.h>
+#include <linux/tracepoint.h>
+#include <linux/mm.h>
+#include <linux/memcontrol.h>
+#include "gfpflags.h"
+
+#define RECLAIM_WB_ANON		0x0001u
+#define RECLAIM_WB_FILE		0x0002u
+#define RECLAIM_WB_MIXED	0x0010u
+#define RECLAIM_WB_SYNC		0x0004u
+#define RECLAIM_WB_ASYNC	0x0008u
+
+#define show_reclaim_flags(flags)				\
+	(flags) ? __print_flags(flags, "|",			\
+		{RECLAIM_WB_ANON,	"RECLAIM_WB_ANON"},	\
+		{RECLAIM_WB_FILE,	"RECLAIM_WB_FILE"},	\
+		{RECLAIM_WB_MIXED,	"RECLAIM_WB_MIXED"},	\
+		{RECLAIM_WB_SYNC,	"RECLAIM_WB_SYNC"},	\
+		{RECLAIM_WB_ASYNC,	"RECLAIM_WB_ASYNC"}	\
+		) : "RECLAIM_WB_NONE"
+
+#define trace_reclaim_flags(page, sync) ( \
+	(page_is_file_cache(page) ? RECLAIM_WB_FILE : RECLAIM_WB_ANON) | \
+	(sync & RECLAIM_MODE_SYNC ? RECLAIM_WB_SYNC : RECLAIM_WB_ASYNC)   \
+	)
+
+#define trace_shrink_flags(file, sync) ( \
+	(sync & RECLAIM_MODE_SYNC ? RECLAIM_WB_MIXED : \
+			(file ? RECLAIM_WB_FILE : RECLAIM_WB_ANON)) |  \
+	(sync & RECLAIM_MODE_SYNC ? RECLAIM_WB_SYNC : RECLAIM_WB_ASYNC) \
+	)
+
+TRACE_EVENT(mm_vmscan_kswapd_sleep,
+
+	TP_PROTO(int nid),
+
+	TP_ARGS(nid),
+
+	TP_STRUCT__entry(
+		__field(	int,	nid	)
+	),
+
+	TP_fast_assign(
+		__entry->nid	= nid;
+	),
+
+	TP_printk("nid=%d", __entry->nid)
+);
+
+TRACE_EVENT(mm_vmscan_kswapd_wake,
+
+	TP_PROTO(int nid, int order),
+
+	TP_ARGS(nid, order),
+
+	TP_STRUCT__entry(
+		__field(	int,	nid	)
+		__field(	int,	order	)
+	),
+
+	TP_fast_assign(
+		__entry->nid	= nid;
+		__entry->order	= order;
+	),
+
+	TP_printk("nid=%d order=%d", __entry->nid, __entry->order)
+);
+
+TRACE_EVENT(mm_vmscan_wakeup_kswapd,
+
+	TP_PROTO(int nid, int zid, int order),
+
+	TP_ARGS(nid, zid, order),
+
+	TP_STRUCT__entry(
+		__field(	int,		nid	)
+		__field(	int,		zid	)
+		__field(	int,		order	)
+	),
+
+	TP_fast_assign(
+		__entry->nid		= nid;
+		__entry->zid		= zid;
+		__entry->order		= order;
+	),
+
+	TP_printk("nid=%d zid=%d order=%d",
+		__entry->nid,
+		__entry->zid,
+		__entry->order)
+);
+
+DECLARE_EVENT_CLASS(mm_vmscan_direct_reclaim_begin_template,
+
+	TP_PROTO(int order, int may_writepage, gfp_t gfp_flags),
+
+	TP_ARGS(order, may_writepage, gfp_flags),
+
+	TP_STRUCT__entry(
+		__field(	int,	order		)
+		__field(	int,	may_writepage	)
+		__field(	gfp_t,	gfp_flags	)
+	),
+
+	TP_fast_assign(
+		__entry->order		= order;
+		__entry->may_writepage	= may_writepage;
+		__entry->gfp_flags	= gfp_flags;
+	),
+
+	TP_printk("order=%d may_writepage=%d gfp_flags=%s",
+		__entry->order,
+		__entry->may_writepage,
+		show_gfp_flags(__entry->gfp_flags))
+);
+
+DEFINE_EVENT(mm_vmscan_direct_reclaim_begin_template, mm_vmscan_direct_reclaim_begin,
+
+	TP_PROTO(int order, int may_writepage, gfp_t gfp_flags),
+
+	TP_ARGS(order, may_writepage, gfp_flags)
+);
+
+DEFINE_EVENT(mm_vmscan_direct_reclaim_begin_template, mm_vmscan_memcg_reclaim_begin,
+
+	TP_PROTO(int order, int may_writepage, gfp_t gfp_flags),
+
+	TP_ARGS(order, may_writepage, gfp_flags)
+);
+
+DEFINE_EVENT(mm_vmscan_direct_reclaim_begin_template, mm_vmscan_memcg_softlimit_reclaim_begin,
+
+	TP_PROTO(int order, int may_writepage, gfp_t gfp_flags),
+
+	TP_ARGS(order, may_writepage, gfp_flags)
+);
+
+DECLARE_EVENT_CLASS(mm_vmscan_direct_reclaim_end_template,
+
+	TP_PROTO(unsigned long nr_reclaimed),
+
+	TP_ARGS(nr_reclaimed),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,	nr_reclaimed	)
+	),
+
+	TP_fast_assign(
+		__entry->nr_reclaimed	= nr_reclaimed;
+	),
+
+	TP_printk("nr_reclaimed=%lu", __entry->nr_reclaimed)
+);
+
+DEFINE_EVENT(mm_vmscan_direct_reclaim_end_template, mm_vmscan_direct_reclaim_end,
+
+	TP_PROTO(unsigned long nr_reclaimed),
+
+	TP_ARGS(nr_reclaimed)
+);
+
+DEFINE_EVENT(mm_vmscan_direct_reclaim_end_template, mm_vmscan_memcg_reclaim_end,
+
+	TP_PROTO(unsigned long nr_reclaimed),
+
+	TP_ARGS(nr_reclaimed)
+);
+
+DEFINE_EVENT(mm_vmscan_direct_reclaim_end_template, mm_vmscan_memcg_softlimit_reclaim_end,
+
+	TP_PROTO(unsigned long nr_reclaimed),
+
+	TP_ARGS(nr_reclaimed)
+);
+
+TRACE_EVENT(mm_shrink_slab_start,
+	TP_PROTO(struct shrinker *shr, struct shrink_control *sc,
+		long nr_objects_to_shrink, unsigned long pgs_scanned,
+		unsigned long lru_pgs, unsigned long cache_items,
+		unsigned long long delta, unsigned long total_scan),
+
+	TP_ARGS(shr, sc, nr_objects_to_shrink, pgs_scanned, lru_pgs,
+		cache_items, delta, total_scan),
+
+	TP_STRUCT__entry(
+		__field(struct shrinker *, shr)
+		__field(void *, shrink)
+		__field(long, nr_objects_to_shrink)
+		__field(gfp_t, gfp_flags)
+		__field(unsigned long, pgs_scanned)
+		__field(unsigned long, lru_pgs)
+		__field(unsigned long, cache_items)
+		__field(unsigned long long, delta)
+		__field(unsigned long, total_scan)
+	),
+
+	TP_fast_assign(
+		__entry->shr = shr;
+		__entry->shrink = shr->shrink;
+		__entry->nr_objects_to_shrink = nr_objects_to_shrink;
+		__entry->gfp_flags = sc->gfp_mask;
+		__entry->pgs_scanned = pgs_scanned;
+		__entry->lru_pgs = lru_pgs;
+		__entry->cache_items = cache_items;
+		__entry->delta = delta;
+		__entry->total_scan = total_scan;
+	),
+
+	TP_printk("%pF %p: objects to shrink %ld gfp_flags %s pgs_scanned %ld lru_pgs %ld cache items %ld delta %lld total_scan %ld",
+		__entry->shrink,
+		__entry->shr,
+		__entry->nr_objects_to_shrink,
+		show_gfp_flags(__entry->gfp_flags),
+		__entry->pgs_scanned,
+		__entry->lru_pgs,
+		__entry->cache_items,
+		__entry->delta,
+		__entry->total_scan)
+);
+
+TRACE_EVENT(mm_shrink_slab_end,
+	TP_PROTO(struct shrinker *shr, int shrinker_retval,
+		long unused_scan_cnt, long new_scan_cnt),
+
+	TP_ARGS(shr, shrinker_retval, unused_scan_cnt, new_scan_cnt),
+
+	TP_STRUCT__entry(
+		__field(struct shrinker *, shr)
+		__field(void *, shrink)
+		__field(long, unused_scan)
+		__field(long, new_scan)
+		__field(int, retval)
+		__field(long, total_scan)
+	),
+
+	TP_fast_assign(
+		__entry->shr = shr;
+		__entry->shrink = shr->shrink;
+		__entry->unused_scan = unused_scan_cnt;
+		__entry->new_scan = new_scan_cnt;
+		__entry->retval = shrinker_retval;
+		__entry->total_scan = new_scan_cnt - unused_scan_cnt;
+	),
+
+	TP_printk("%pF %p: unused scan count %ld new scan count %ld total_scan %ld last shrinker return val %d",
+		__entry->shrink,
+		__entry->shr,
+		__entry->unused_scan,
+		__entry->new_scan,
+		__entry->total_scan,
+		__entry->retval)
+);
+
+DECLARE_EVENT_CLASS(mm_vmscan_lru_isolate_template,
+
+	TP_PROTO(int order,
+		unsigned long nr_requested,
+		unsigned long nr_scanned,
+		unsigned long nr_taken,
+		unsigned long nr_lumpy_taken,
+		unsigned long nr_lumpy_dirty,
+		unsigned long nr_lumpy_failed,
+		isolate_mode_t isolate_mode,
+		int file),
+
+	TP_ARGS(order, nr_requested, nr_scanned, nr_taken, nr_lumpy_taken, nr_lumpy_dirty, nr_lumpy_failed, isolate_mode, file),
+
+	TP_STRUCT__entry(
+		__field(int, order)
+		__field(unsigned long, nr_requested)
+		__field(unsigned long, nr_scanned)
+		__field(unsigned long, nr_taken)
+		__field(unsigned long, nr_lumpy_taken)
+		__field(unsigned long, nr_lumpy_dirty)
+		__field(unsigned long, nr_lumpy_failed)
+		__field(isolate_mode_t, isolate_mode)
+		__field(int, file)
+	),
+
+	TP_fast_assign(
+		__entry->order = order;
+		__entry->nr_requested = nr_requested;
+		__entry->nr_scanned = nr_scanned;
+		__entry->nr_taken = nr_taken;
+		__entry->nr_lumpy_taken = nr_lumpy_taken;
+		__entry->nr_lumpy_dirty = nr_lumpy_dirty;
+		__entry->nr_lumpy_failed = nr_lumpy_failed;
+		__entry->isolate_mode = isolate_mode;
+		__entry->file = file;
+	),
+
+	TP_printk("isolate_mode=%d order=%d nr_requested=%lu nr_scanned=%lu nr_taken=%lu contig_taken=%lu contig_dirty=%lu contig_failed=%lu file=%d",
+		__entry->isolate_mode,
+		__entry->order,
+		__entry->nr_requested,
+		__entry->nr_scanned,
+		__entry->nr_taken,
+		__entry->nr_lumpy_taken,
+		__entry->nr_lumpy_dirty,
+		__entry->nr_lumpy_failed,
+		__entry->file)
+);
+
+DEFINE_EVENT(mm_vmscan_lru_isolate_template, mm_vmscan_lru_isolate,
+
+	TP_PROTO(int order,
+		unsigned long nr_requested,
+		unsigned long nr_scanned,
+		unsigned long nr_taken,
+		unsigned long nr_lumpy_taken,
+		unsigned long nr_lumpy_dirty,
+		unsigned long nr_lumpy_failed,
+		isolate_mode_t isolate_mode,
+		int file),
+
+	TP_ARGS(order, nr_requested, nr_scanned, nr_taken, nr_lumpy_taken, nr_lumpy_dirty, nr_lumpy_failed, isolate_mode, file)
+
+);
+
+DEFINE_EVENT(mm_vmscan_lru_isolate_template, mm_vmscan_memcg_isolate,
+
+	TP_PROTO(int order,
+		unsigned long nr_requested,
+		unsigned long nr_scanned,
+		unsigned long nr_taken,
+		unsigned long nr_lumpy_taken,
+		unsigned long nr_lumpy_dirty,
+		unsigned long nr_lumpy_failed,
+		isolate_mode_t isolate_mode,
+		int file),
+
+	TP_ARGS(order, nr_requested, nr_scanned, nr_taken, nr_lumpy_taken, nr_lumpy_dirty, nr_lumpy_failed, isolate_mode, file)
+
+);
+
+TRACE_EVENT(mm_vmscan_writepage,
+
+	TP_PROTO(struct page *page,
+		int reclaim_flags),
+
+	TP_ARGS(page, reclaim_flags),
+
+	TP_STRUCT__entry(
+		__field(struct page *, page)
+		__field(int, reclaim_flags)
+	),
+
+	TP_fast_assign(
+		__entry->page = page;
+		__entry->reclaim_flags = reclaim_flags;
+	),
+
+	TP_printk("page=%p pfn=%lu flags=%s",
+		__entry->page,
+		page_to_pfn(__entry->page),
+		show_reclaim_flags(__entry->reclaim_flags))
+);
+
+TRACE_EVENT(mm_vmscan_lru_shrink_inactive,
+
+	TP_PROTO(int nid, int zid,
+			unsigned long nr_scanned, unsigned long nr_reclaimed,
+			int priority, int reclaim_flags),
+
+	TP_ARGS(nid, zid, nr_scanned, nr_reclaimed, priority, reclaim_flags),
+
+	TP_STRUCT__entry(
+		__field(int, nid)
+		__field(int, zid)
+		__field(unsigned long, nr_scanned)
+		__field(unsigned long, nr_reclaimed)
+		__field(int, priority)
+		__field(int, reclaim_flags)
+	),
+
+	TP_fast_assign(
+		__entry->nid = nid;
+		__entry->zid = zid;
+		__entry->nr_scanned = nr_scanned;
+		__entry->nr_reclaimed = nr_reclaimed;
+		__entry->priority = priority;
+		__entry->reclaim_flags = reclaim_flags;
+	),
+
+	TP_printk("nid=%d zid=%d nr_scanned=%ld nr_reclaimed=%ld priority=%d flags=%s",
+		__entry->nid, __entry->zid,
+		__entry->nr_scanned, __entry->nr_reclaimed,
+		__entry->priority,
+		show_reclaim_flags(__entry->reclaim_flags))
+);
+
+TRACE_EVENT(replace_swap_token,
+	TP_PROTO(struct mm_struct *old_mm,
+		 struct mm_struct *new_mm),
+
+	TP_ARGS(old_mm, new_mm),
+
+	TP_STRUCT__entry(
+		__field(struct mm_struct*,	old_mm)
+		__field(unsigned int,		old_prio)
+		__field(struct mm_struct*,	new_mm)
+		__field(unsigned int,		new_prio)
+	),
+
+	TP_fast_assign(
+		__entry->old_mm   = old_mm;
+		__entry->old_prio = old_mm ? old_mm->token_priority : 0;
+		__entry->new_mm   = new_mm;
+		__entry->new_prio = new_mm->token_priority;
+	),
+
+	TP_printk("old_token_mm=%p old_prio=%u new_token_mm=%p new_prio=%u",
+		  __entry->old_mm, __entry->old_prio,
+		  __entry->new_mm, __entry->new_prio)
+);
+
+DECLARE_EVENT_CLASS(put_swap_token_template,
+	TP_PROTO(struct mm_struct *swap_token_mm),
+
+	TP_ARGS(swap_token_mm),
+
+	TP_STRUCT__entry(
+		__field(struct mm_struct*, swap_token_mm)
+	),
+
+	TP_fast_assign(
+		__entry->swap_token_mm = swap_token_mm;
+	),
+
+	TP_printk("token_mm=%p", __entry->swap_token_mm)
+);
+
+DEFINE_EVENT(put_swap_token_template, put_swap_token,
+	TP_PROTO(struct mm_struct *swap_token_mm),
+	TP_ARGS(swap_token_mm)
+);
+
+DEFINE_EVENT_CONDITION(put_swap_token_template, disable_swap_token,
+	TP_PROTO(struct mm_struct *swap_token_mm),
+	TP_ARGS(swap_token_mm),
+	TP_CONDITION(swap_token_mm != NULL)
+);
+
+TRACE_EVENT_CONDITION(update_swap_token_priority,
+	TP_PROTO(struct mm_struct *mm,
+		 unsigned int old_prio,
+		 struct mm_struct *swap_token_mm),
+
+	TP_ARGS(mm, old_prio, swap_token_mm),
+
+	TP_CONDITION(mm->token_priority != old_prio),
+
+	TP_STRUCT__entry(
+		__field(struct mm_struct*, mm)
+		__field(unsigned int, old_prio)
+		__field(unsigned int, new_prio)
+		__field(struct mm_struct*, swap_token_mm)
+		__field(unsigned int, swap_token_prio)
+	),
+
+	TP_fast_assign(
+		__entry->mm		= mm;
+		__entry->old_prio	= old_prio;
+		__entry->new_prio	= mm->token_priority;
+		__entry->swap_token_mm	= swap_token_mm;
+		__entry->swap_token_prio = swap_token_mm ? swap_token_mm->token_priority : 0;
+	),
+
+	TP_printk("mm=%p old_prio=%u new_prio=%u swap_token_mm=%p token_prio=%u",
+		  __entry->mm, __entry->old_prio, __entry->new_prio,
+		  __entry->swap_token_mm, __entry->swap_token_prio)
+);
+
+#endif /* _TRACE_VMSCAN_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/workqueue.h b/include/trace/events/workqueue.h
new file mode 100644
index 00000000..7d497291
--- /dev/null
+++ b/include/trace/events/workqueue.h
@@ -0,0 +1,121 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM workqueue
+
+#if !defined(_TRACE_WORKQUEUE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_WORKQUEUE_H
+
+#include <linux/tracepoint.h>
+#include <linux/workqueue.h>
+
+DECLARE_EVENT_CLASS(workqueue_work,
+
+	TP_PROTO(struct work_struct *work),
+
+	TP_ARGS(work),
+
+	TP_STRUCT__entry(
+		__field( void *,	work	)
+	),
+
+	TP_fast_assign(
+		__entry->work		= work;
+	),
+
+	TP_printk("work struct %p", __entry->work)
+);
+
+/**
+ * workqueue_queue_work - called when a work gets queued
+ * @req_cpu:	the requested cpu
+ * @cwq:	pointer to struct cpu_workqueue_struct
+ * @work:	pointer to struct work_struct
+ *
+ * This event occurs when a work is queued immediately or once a
+ * delayed work is actually queued on a workqueue (ie: once the delay
+ * has been reached).
+ */
+TRACE_EVENT(workqueue_queue_work,
+
+	TP_PROTO(unsigned int req_cpu, struct cpu_workqueue_struct *cwq,
+		 struct work_struct *work),
+
+	TP_ARGS(req_cpu, cwq, work),
+
+	TP_STRUCT__entry(
+		__field( void *,	work	)
+		__field( void *,	function)
+		__field( void *,	workqueue)
+		__field( unsigned int,	req_cpu	)
+		__field( unsigned int,	cpu	)
+	),
+
+	TP_fast_assign(
+		__entry->work		= work;
+		__entry->function	= work->func;
+		__entry->workqueue	= cwq->wq;
+		__entry->req_cpu	= req_cpu;
+		__entry->cpu		= cwq->gcwq->cpu;
+	),
+
+	TP_printk("work struct=%p function=%pf workqueue=%p req_cpu=%u cpu=%u",
+		  __entry->work, __entry->function, __entry->workqueue,
+		  __entry->req_cpu, __entry->cpu)
+);
+
+/**
+ * workqueue_activate_work - called when a work gets activated
+ * @work:	pointer to struct work_struct
+ *
+ * This event occurs when a queued work is put on the active queue,
+ * which happens immediately after queueing unless @max_active limit
+ * is reached.
+ */
+DEFINE_EVENT(workqueue_work, workqueue_activate_work,
+
+	TP_PROTO(struct work_struct *work),
+
+	TP_ARGS(work)
+);
+
+/**
+ * workqueue_execute_start - called immediately before the workqueue callback
+ * @work:	pointer to struct work_struct
+ *
+ * Allows to track workqueue execution.
+ */
+TRACE_EVENT(workqueue_execute_start,
+
+	TP_PROTO(struct work_struct *work),
+
+	TP_ARGS(work),
+
+	TP_STRUCT__entry(
+		__field( void *,	work	)
+		__field( void *,	function)
+	),
+
+	TP_fast_assign(
+		__entry->work		= work;
+		__entry->function	= work->func;
+	),
+
+	TP_printk("work struct %p: function %pf", __entry->work, __entry->function)
+);
+
+/**
+ * workqueue_execute_end - called immediately before the workqueue callback
+ * @work:	pointer to struct work_struct
+ *
+ * Allows to track workqueue execution.
+ */
+DEFINE_EVENT(workqueue_work, workqueue_execute_end,
+
+	TP_PROTO(struct work_struct *work),
+
+	TP_ARGS(work)
+);
+
+#endif /*  _TRACE_WORKQUEUE_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/writeback.h b/include/trace/events/writeback.h
new file mode 100644
index 00000000..7b81887b
--- /dev/null
+++ b/include/trace/events/writeback.h
@@ -0,0 +1,470 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM writeback
+
+#if !defined(_TRACE_WRITEBACK_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_WRITEBACK_H
+
+#include <linux/backing-dev.h>
+#include <linux/writeback.h>
+
+#define show_inode_state(state)					\
+	__print_flags(state, "|",				\
+		{I_DIRTY_SYNC,		"I_DIRTY_SYNC"},	\
+		{I_DIRTY_DATASYNC,	"I_DIRTY_DATASYNC"},	\
+		{I_DIRTY_PAGES,		"I_DIRTY_PAGES"},	\
+		{I_NEW,			"I_NEW"},		\
+		{I_WILL_FREE,		"I_WILL_FREE"},		\
+		{I_FREEING,		"I_FREEING"},		\
+		{I_CLEAR,		"I_CLEAR"},		\
+		{I_SYNC,		"I_SYNC"},		\
+		{I_REFERENCED,		"I_REFERENCED"}		\
+	)
+
+#define WB_WORK_REASON							\
+		{WB_REASON_BACKGROUND,		"background"},		\
+		{WB_REASON_TRY_TO_FREE_PAGES,	"try_to_free_pages"},	\
+		{WB_REASON_SYNC,		"sync"},		\
+		{WB_REASON_PERIODIC,		"periodic"},		\
+		{WB_REASON_LAPTOP_TIMER,	"laptop_timer"},	\
+		{WB_REASON_FREE_MORE_MEM,	"free_more_memory"},	\
+		{WB_REASON_FS_FREE_SPACE,	"fs_free_space"},	\
+		{WB_REASON_FORKER_THREAD,	"forker_thread"}
+
+struct wb_writeback_work;
+
+DECLARE_EVENT_CLASS(writeback_work_class,
+	TP_PROTO(struct backing_dev_info *bdi, struct wb_writeback_work *work),
+	TP_ARGS(bdi, work),
+	TP_STRUCT__entry(
+		__array(char, name, 32)
+		__field(long, nr_pages)
+		__field(dev_t, sb_dev)
+		__field(int, sync_mode)
+		__field(int, for_kupdate)
+		__field(int, range_cyclic)
+		__field(int, for_background)
+		__field(int, reason)
+	),
+	TP_fast_assign(
+		struct device *dev = bdi->dev;
+		if (!dev)
+			dev = default_backing_dev_info.dev;
+		strncpy(__entry->name, dev_name(dev), 32);
+		__entry->nr_pages = work->nr_pages;
+		__entry->sb_dev = work->sb ? work->sb->s_dev : 0;
+		__entry->sync_mode = work->sync_mode;
+		__entry->for_kupdate = work->for_kupdate;
+		__entry->range_cyclic = work->range_cyclic;
+		__entry->for_background	= work->for_background;
+		__entry->reason = work->reason;
+	),
+	TP_printk("bdi %s: sb_dev %d:%d nr_pages=%ld sync_mode=%d "
+		  "kupdate=%d range_cyclic=%d background=%d reason=%s",
+		  __entry->name,
+		  MAJOR(__entry->sb_dev), MINOR(__entry->sb_dev),
+		  __entry->nr_pages,
+		  __entry->sync_mode,
+		  __entry->for_kupdate,
+		  __entry->range_cyclic,
+		  __entry->for_background,
+		  __print_symbolic(__entry->reason, WB_WORK_REASON)
+	)
+);
+#define DEFINE_WRITEBACK_WORK_EVENT(name) \
+DEFINE_EVENT(writeback_work_class, name, \
+	TP_PROTO(struct backing_dev_info *bdi, struct wb_writeback_work *work), \
+	TP_ARGS(bdi, work))
+DEFINE_WRITEBACK_WORK_EVENT(writeback_nothread);
+DEFINE_WRITEBACK_WORK_EVENT(writeback_queue);
+DEFINE_WRITEBACK_WORK_EVENT(writeback_exec);
+DEFINE_WRITEBACK_WORK_EVENT(writeback_start);
+DEFINE_WRITEBACK_WORK_EVENT(writeback_written);
+DEFINE_WRITEBACK_WORK_EVENT(writeback_wait);
+
+TRACE_EVENT(writeback_pages_written,
+	TP_PROTO(long pages_written),
+	TP_ARGS(pages_written),
+	TP_STRUCT__entry(
+		__field(long,		pages)
+	),
+	TP_fast_assign(
+		__entry->pages		= pages_written;
+	),
+	TP_printk("%ld", __entry->pages)
+);
+
+DECLARE_EVENT_CLASS(writeback_class,
+	TP_PROTO(struct backing_dev_info *bdi),
+	TP_ARGS(bdi),
+	TP_STRUCT__entry(
+		__array(char, name, 32)
+	),
+	TP_fast_assign(
+		strncpy(__entry->name, dev_name(bdi->dev), 32);
+	),
+	TP_printk("bdi %s",
+		  __entry->name
+	)
+);
+#define DEFINE_WRITEBACK_EVENT(name) \
+DEFINE_EVENT(writeback_class, name, \
+	TP_PROTO(struct backing_dev_info *bdi), \
+	TP_ARGS(bdi))
+
+DEFINE_WRITEBACK_EVENT(writeback_nowork);
+DEFINE_WRITEBACK_EVENT(writeback_wake_background);
+DEFINE_WRITEBACK_EVENT(writeback_wake_thread);
+DEFINE_WRITEBACK_EVENT(writeback_wake_forker_thread);
+DEFINE_WRITEBACK_EVENT(writeback_bdi_register);
+DEFINE_WRITEBACK_EVENT(writeback_bdi_unregister);
+DEFINE_WRITEBACK_EVENT(writeback_thread_start);
+DEFINE_WRITEBACK_EVENT(writeback_thread_stop);
+
+DECLARE_EVENT_CLASS(wbc_class,
+	TP_PROTO(struct writeback_control *wbc, struct backing_dev_info *bdi),
+	TP_ARGS(wbc, bdi),
+	TP_STRUCT__entry(
+		__array(char, name, 32)
+		__field(long, nr_to_write)
+		__field(long, pages_skipped)
+		__field(int, sync_mode)
+		__field(int, for_kupdate)
+		__field(int, for_background)
+		__field(int, for_reclaim)
+		__field(int, range_cyclic)
+		__field(long, range_start)
+		__field(long, range_end)
+	),
+
+	TP_fast_assign(
+		strncpy(__entry->name, dev_name(bdi->dev), 32);
+		__entry->nr_to_write	= wbc->nr_to_write;
+		__entry->pages_skipped	= wbc->pages_skipped;
+		__entry->sync_mode	= wbc->sync_mode;
+		__entry->for_kupdate	= wbc->for_kupdate;
+		__entry->for_background	= wbc->for_background;
+		__entry->for_reclaim	= wbc->for_reclaim;
+		__entry->range_cyclic	= wbc->range_cyclic;
+		__entry->range_start	= (long)wbc->range_start;
+		__entry->range_end	= (long)wbc->range_end;
+	),
+
+	TP_printk("bdi %s: towrt=%ld skip=%ld mode=%d kupd=%d "
+		"bgrd=%d reclm=%d cyclic=%d "
+		"start=0x%lx end=0x%lx",
+		__entry->name,
+		__entry->nr_to_write,
+		__entry->pages_skipped,
+		__entry->sync_mode,
+		__entry->for_kupdate,
+		__entry->for_background,
+		__entry->for_reclaim,
+		__entry->range_cyclic,
+		__entry->range_start,
+		__entry->range_end)
+)
+
+#define DEFINE_WBC_EVENT(name) \
+DEFINE_EVENT(wbc_class, name, \
+	TP_PROTO(struct writeback_control *wbc, struct backing_dev_info *bdi), \
+	TP_ARGS(wbc, bdi))
+DEFINE_WBC_EVENT(wbc_writepage);
+
+TRACE_EVENT(writeback_queue_io,
+	TP_PROTO(struct bdi_writeback *wb,
+		 struct wb_writeback_work *work,
+		 int moved),
+	TP_ARGS(wb, work, moved),
+	TP_STRUCT__entry(
+		__array(char,		name, 32)
+		__field(unsigned long,	older)
+		__field(long,		age)
+		__field(int,		moved)
+		__field(int,		reason)
+	),
+	TP_fast_assign(
+		unsigned long *older_than_this = work->older_than_this;
+		strncpy(__entry->name, dev_name(wb->bdi->dev), 32);
+		__entry->older	= older_than_this ?  *older_than_this : 0;
+		__entry->age	= older_than_this ?
+				  (jiffies - *older_than_this) * 1000 / HZ : -1;
+		__entry->moved	= moved;
+		__entry->reason	= work->reason;
+	),
+	TP_printk("bdi %s: older=%lu age=%ld enqueue=%d reason=%s",
+		__entry->name,
+		__entry->older,	/* older_than_this in jiffies */
+		__entry->age,	/* older_than_this in relative milliseconds */
+		__entry->moved,
+		__print_symbolic(__entry->reason, WB_WORK_REASON)
+	)
+);
+
+TRACE_EVENT(global_dirty_state,
+
+	TP_PROTO(unsigned long background_thresh,
+		 unsigned long dirty_thresh
+	),
+
+	TP_ARGS(background_thresh,
+		dirty_thresh
+	),
+
+	TP_STRUCT__entry(
+		__field(unsigned long,	nr_dirty)
+		__field(unsigned long,	nr_writeback)
+		__field(unsigned long,	nr_unstable)
+		__field(unsigned long,	background_thresh)
+		__field(unsigned long,	dirty_thresh)
+		__field(unsigned long,	dirty_limit)
+		__field(unsigned long,	nr_dirtied)
+		__field(unsigned long,	nr_written)
+	),
+
+	TP_fast_assign(
+		__entry->nr_dirty	= global_page_state(NR_FILE_DIRTY);
+		__entry->nr_writeback	= global_page_state(NR_WRITEBACK);
+		__entry->nr_unstable	= global_page_state(NR_UNSTABLE_NFS);
+		__entry->nr_dirtied	= global_page_state(NR_DIRTIED);
+		__entry->nr_written	= global_page_state(NR_WRITTEN);
+		__entry->background_thresh = background_thresh;
+		__entry->dirty_thresh	= dirty_thresh;
+		__entry->dirty_limit = global_dirty_limit;
+	),
+
+	TP_printk("dirty=%lu writeback=%lu unstable=%lu "
+		  "bg_thresh=%lu thresh=%lu limit=%lu "
+		  "dirtied=%lu written=%lu",
+		  __entry->nr_dirty,
+		  __entry->nr_writeback,
+		  __entry->nr_unstable,
+		  __entry->background_thresh,
+		  __entry->dirty_thresh,
+		  __entry->dirty_limit,
+		  __entry->nr_dirtied,
+		  __entry->nr_written
+	)
+);
+
+#define KBps(x)			((x) << (PAGE_SHIFT - 10))
+
+TRACE_EVENT(bdi_dirty_ratelimit,
+
+	TP_PROTO(struct backing_dev_info *bdi,
+		 unsigned long dirty_rate,
+		 unsigned long task_ratelimit),
+
+	TP_ARGS(bdi, dirty_rate, task_ratelimit),
+
+	TP_STRUCT__entry(
+		__array(char,		bdi, 32)
+		__field(unsigned long,	write_bw)
+		__field(unsigned long,	avg_write_bw)
+		__field(unsigned long,	dirty_rate)
+		__field(unsigned long,	dirty_ratelimit)
+		__field(unsigned long,	task_ratelimit)
+		__field(unsigned long,	balanced_dirty_ratelimit)
+	),
+
+	TP_fast_assign(
+		strlcpy(__entry->bdi, dev_name(bdi->dev), 32);
+		__entry->write_bw	= KBps(bdi->write_bandwidth);
+		__entry->avg_write_bw	= KBps(bdi->avg_write_bandwidth);
+		__entry->dirty_rate	= KBps(dirty_rate);
+		__entry->dirty_ratelimit = KBps(bdi->dirty_ratelimit);
+		__entry->task_ratelimit	= KBps(task_ratelimit);
+		__entry->balanced_dirty_ratelimit =
+					  KBps(bdi->balanced_dirty_ratelimit);
+	),
+
+	TP_printk("bdi %s: "
+		  "write_bw=%lu awrite_bw=%lu dirty_rate=%lu "
+		  "dirty_ratelimit=%lu task_ratelimit=%lu "
+		  "balanced_dirty_ratelimit=%lu",
+		  __entry->bdi,
+		  __entry->write_bw,		/* write bandwidth */
+		  __entry->avg_write_bw,	/* avg write bandwidth */
+		  __entry->dirty_rate,		/* bdi dirty rate */
+		  __entry->dirty_ratelimit,	/* base ratelimit */
+		  __entry->task_ratelimit, /* ratelimit with position control */
+		  __entry->balanced_dirty_ratelimit /* the balanced ratelimit */
+	)
+);
+
+TRACE_EVENT(balance_dirty_pages,
+
+	TP_PROTO(struct backing_dev_info *bdi,
+		 unsigned long thresh,
+		 unsigned long bg_thresh,
+		 unsigned long dirty,
+		 unsigned long bdi_thresh,
+		 unsigned long bdi_dirty,
+		 unsigned long dirty_ratelimit,
+		 unsigned long task_ratelimit,
+		 unsigned long dirtied,
+		 unsigned long period,
+		 long pause,
+		 unsigned long start_time),
+
+	TP_ARGS(bdi, thresh, bg_thresh, dirty, bdi_thresh, bdi_dirty,
+		dirty_ratelimit, task_ratelimit,
+		dirtied, period, pause, start_time),
+
+	TP_STRUCT__entry(
+		__array(	 char,	bdi, 32)
+		__field(unsigned long,	limit)
+		__field(unsigned long,	setpoint)
+		__field(unsigned long,	dirty)
+		__field(unsigned long,	bdi_setpoint)
+		__field(unsigned long,	bdi_dirty)
+		__field(unsigned long,	dirty_ratelimit)
+		__field(unsigned long,	task_ratelimit)
+		__field(unsigned int,	dirtied)
+		__field(unsigned int,	dirtied_pause)
+		__field(unsigned long,	paused)
+		__field(	 long,	pause)
+		__field(unsigned long,	period)
+		__field(	 long,	think)
+	),
+
+	TP_fast_assign(
+		unsigned long freerun = (thresh + bg_thresh) / 2;
+		strlcpy(__entry->bdi, dev_name(bdi->dev), 32);
+
+		__entry->limit		= global_dirty_limit;
+		__entry->setpoint	= (global_dirty_limit + freerun) / 2;
+		__entry->dirty		= dirty;
+		__entry->bdi_setpoint	= __entry->setpoint *
+						bdi_thresh / (thresh + 1);
+		__entry->bdi_dirty	= bdi_dirty;
+		__entry->dirty_ratelimit = KBps(dirty_ratelimit);
+		__entry->task_ratelimit	= KBps(task_ratelimit);
+		__entry->dirtied	= dirtied;
+		__entry->dirtied_pause	= current->nr_dirtied_pause;
+		__entry->think		= current->dirty_paused_when == 0 ? 0 :
+			 (long)(jiffies - current->dirty_paused_when) * 1000/HZ;
+		__entry->period		= period * 1000 / HZ;
+		__entry->pause		= pause * 1000 / HZ;
+		__entry->paused		= (jiffies - start_time) * 1000 / HZ;
+	),
+
+
+	TP_printk("bdi %s: "
+		  "limit=%lu setpoint=%lu dirty=%lu "
+		  "bdi_setpoint=%lu bdi_dirty=%lu "
+		  "dirty_ratelimit=%lu task_ratelimit=%lu "
+		  "dirtied=%u dirtied_pause=%u "
+		  "paused=%lu pause=%ld period=%lu think=%ld",
+		  __entry->bdi,
+		  __entry->limit,
+		  __entry->setpoint,
+		  __entry->dirty,
+		  __entry->bdi_setpoint,
+		  __entry->bdi_dirty,
+		  __entry->dirty_ratelimit,
+		  __entry->task_ratelimit,
+		  __entry->dirtied,
+		  __entry->dirtied_pause,
+		  __entry->paused,	/* ms */
+		  __entry->pause,	/* ms */
+		  __entry->period,	/* ms */
+		  __entry->think	/* ms */
+	  )
+);
+
+DECLARE_EVENT_CLASS(writeback_congest_waited_template,
+
+	TP_PROTO(unsigned int usec_timeout, unsigned int usec_delayed),
+
+	TP_ARGS(usec_timeout, usec_delayed),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int,	usec_timeout	)
+		__field(	unsigned int,	usec_delayed	)
+	),
+
+	TP_fast_assign(
+		__entry->usec_timeout	= usec_timeout;
+		__entry->usec_delayed	= usec_delayed;
+	),
+
+	TP_printk("usec_timeout=%u usec_delayed=%u",
+			__entry->usec_timeout,
+			__entry->usec_delayed)
+);
+
+DEFINE_EVENT(writeback_congest_waited_template, writeback_congestion_wait,
+
+	TP_PROTO(unsigned int usec_timeout, unsigned int usec_delayed),
+
+	TP_ARGS(usec_timeout, usec_delayed)
+);
+
+DEFINE_EVENT(writeback_congest_waited_template, writeback_wait_iff_congested,
+
+	TP_PROTO(unsigned int usec_timeout, unsigned int usec_delayed),
+
+	TP_ARGS(usec_timeout, usec_delayed)
+);
+
+DECLARE_EVENT_CLASS(writeback_single_inode_template,
+
+	TP_PROTO(struct inode *inode,
+		 struct writeback_control *wbc,
+		 unsigned long nr_to_write
+	),
+
+	TP_ARGS(inode, wbc, nr_to_write),
+
+	TP_STRUCT__entry(
+		__array(char, name, 32)
+		__field(unsigned long, ino)
+		__field(unsigned long, state)
+		__field(unsigned long, dirtied_when)
+		__field(unsigned long, writeback_index)
+		__field(long, nr_to_write)
+		__field(unsigned long, wrote)
+	),
+
+	TP_fast_assign(
+		strncpy(__entry->name,
+			dev_name(inode_to_bdi(inode)->dev), 32);
+		__entry->ino		= inode->i_ino;
+		__entry->state		= inode->i_state;
+		__entry->dirtied_when	= inode->dirtied_when;
+		__entry->writeback_index = inode->i_mapping->writeback_index;
+		__entry->nr_to_write	= nr_to_write;
+		__entry->wrote		= nr_to_write - wbc->nr_to_write;
+	),
+
+	TP_printk("bdi %s: ino=%lu state=%s dirtied_when=%lu age=%lu "
+		  "index=%lu to_write=%ld wrote=%lu",
+		  __entry->name,
+		  __entry->ino,
+		  show_inode_state(__entry->state),
+		  __entry->dirtied_when,
+		  (jiffies - __entry->dirtied_when) / HZ,
+		  __entry->writeback_index,
+		  __entry->nr_to_write,
+		  __entry->wrote
+	)
+);
+
+DEFINE_EVENT(writeback_single_inode_template, writeback_single_inode_requeue,
+	TP_PROTO(struct inode *inode,
+		 struct writeback_control *wbc,
+		 unsigned long nr_to_write),
+	TP_ARGS(inode, wbc, nr_to_write)
+);
+
+DEFINE_EVENT(writeback_single_inode_template, writeback_single_inode,
+	TP_PROTO(struct inode *inode,
+		 struct writeback_control *wbc,
+		 unsigned long nr_to_write),
+	TP_ARGS(inode, wbc, nr_to_write)
+);
+
+#endif /* _TRACE_WRITEBACK_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/xen.h b/include/trace/events/xen.h
new file mode 100644
index 00000000..92f1a796
--- /dev/null
+++ b/include/trace/events/xen.h
@@ -0,0 +1,506 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM xen
+
+#if !defined(_TRACE_XEN_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_XEN_H
+
+#include <linux/tracepoint.h>
+#include <asm/paravirt_types.h>
+#include <asm/xen/trace_types.h>
+
+struct multicall_entry;
+
+/* Multicalls */
+DECLARE_EVENT_CLASS(xen_mc__batch,
+	    TP_PROTO(enum paravirt_lazy_mode mode),
+	    TP_ARGS(mode),
+	    TP_STRUCT__entry(
+		    __field(enum paravirt_lazy_mode, mode)
+		    ),
+	    TP_fast_assign(__entry->mode = mode),
+	    TP_printk("start batch LAZY_%s",
+		      (__entry->mode == PARAVIRT_LAZY_MMU) ? "MMU" :
+		      (__entry->mode == PARAVIRT_LAZY_CPU) ? "CPU" : "NONE")
+	);
+#define DEFINE_XEN_MC_BATCH(name)			\
+	DEFINE_EVENT(xen_mc__batch, name,		\
+		TP_PROTO(enum paravirt_lazy_mode mode),	\
+		     TP_ARGS(mode))
+
+DEFINE_XEN_MC_BATCH(xen_mc_batch);
+DEFINE_XEN_MC_BATCH(xen_mc_issue);
+
+TRACE_EVENT(xen_mc_entry,
+	    TP_PROTO(struct multicall_entry *mc, unsigned nargs),
+	    TP_ARGS(mc, nargs),
+	    TP_STRUCT__entry(
+		    __field(unsigned int, op)
+		    __field(unsigned int, nargs)
+		    __array(unsigned long, args, 6)
+		    ),
+	    TP_fast_assign(__entry->op = mc->op;
+			   __entry->nargs = nargs;
+			   memcpy(__entry->args, mc->args, sizeof(unsigned long) * nargs);
+			   memset(__entry->args + nargs, 0, sizeof(unsigned long) * (6 - nargs));
+		    ),
+	    TP_printk("op %u%s args [%lx, %lx, %lx, %lx, %lx, %lx]",
+		      __entry->op, xen_hypercall_name(__entry->op),
+		      __entry->args[0], __entry->args[1], __entry->args[2],
+		      __entry->args[3], __entry->args[4], __entry->args[5])
+	);
+
+TRACE_EVENT(xen_mc_entry_alloc,
+	    TP_PROTO(size_t args),
+	    TP_ARGS(args),
+	    TP_STRUCT__entry(
+		    __field(size_t, args)
+		    ),
+	    TP_fast_assign(__entry->args = args),
+	    TP_printk("alloc entry %zu arg bytes", __entry->args)
+	);
+
+TRACE_EVENT(xen_mc_callback,
+	    TP_PROTO(xen_mc_callback_fn_t fn, void *data),
+	    TP_ARGS(fn, data),
+	    TP_STRUCT__entry(
+		    __field(xen_mc_callback_fn_t, fn)
+		    __field(void *, data)
+		    ),
+	    TP_fast_assign(
+		    __entry->fn = fn;
+		    __entry->data = data;
+		    ),
+	    TP_printk("callback %pf, data %p",
+		      __entry->fn, __entry->data)
+	);
+
+TRACE_EVENT(xen_mc_flush_reason,
+	    TP_PROTO(enum xen_mc_flush_reason reason),
+	    TP_ARGS(reason),
+	    TP_STRUCT__entry(
+		    __field(enum xen_mc_flush_reason, reason)
+		    ),
+	    TP_fast_assign(__entry->reason = reason),
+	    TP_printk("flush reason %s",
+		      (__entry->reason == XEN_MC_FL_NONE) ? "NONE" :
+		      (__entry->reason == XEN_MC_FL_BATCH) ? "BATCH" :
+		      (__entry->reason == XEN_MC_FL_ARGS) ? "ARGS" :
+		      (__entry->reason == XEN_MC_FL_CALLBACK) ? "CALLBACK" : "??")
+	);
+
+TRACE_EVENT(xen_mc_flush,
+	    TP_PROTO(unsigned mcidx, unsigned argidx, unsigned cbidx),
+	    TP_ARGS(mcidx, argidx, cbidx),
+	    TP_STRUCT__entry(
+		    __field(unsigned, mcidx)
+		    __field(unsigned, argidx)
+		    __field(unsigned, cbidx)
+		    ),
+	    TP_fast_assign(__entry->mcidx = mcidx;
+			   __entry->argidx = argidx;
+			   __entry->cbidx = cbidx),
+	    TP_printk("flushing %u hypercalls, %u arg bytes, %u callbacks",
+		      __entry->mcidx, __entry->argidx, __entry->cbidx)
+	);
+
+TRACE_EVENT(xen_mc_extend_args,
+	    TP_PROTO(unsigned long op, size_t args, enum xen_mc_extend_args res),
+	    TP_ARGS(op, args, res),
+	    TP_STRUCT__entry(
+		    __field(unsigned int, op)
+		    __field(size_t, args)
+		    __field(enum xen_mc_extend_args, res)
+		    ),
+	    TP_fast_assign(__entry->op = op;
+			   __entry->args = args;
+			   __entry->res = res),
+	    TP_printk("extending op %u%s by %zu bytes res %s",
+		      __entry->op, xen_hypercall_name(__entry->op),
+		      __entry->args,
+		      __entry->res == XEN_MC_XE_OK ? "OK" :
+		      __entry->res == XEN_MC_XE_BAD_OP ? "BAD_OP" :
+		      __entry->res == XEN_MC_XE_NO_SPACE ? "NO_SPACE" : "???")
+	);
+
+/* mmu */
+DECLARE_EVENT_CLASS(xen_mmu__set_pte,
+	    TP_PROTO(pte_t *ptep, pte_t pteval),
+	    TP_ARGS(ptep, pteval),
+	    TP_STRUCT__entry(
+		    __field(pte_t *, ptep)
+		    __field(pteval_t, pteval)
+		    ),
+	    TP_fast_assign(__entry->ptep = ptep;
+			   __entry->pteval = pteval.pte),
+	    TP_printk("ptep %p pteval %0*llx (raw %0*llx)",
+		      __entry->ptep,
+		      (int)sizeof(pteval_t) * 2, (unsigned long long)pte_val(native_make_pte(__entry->pteval)),
+		      (int)sizeof(pteval_t) * 2, (unsigned long long)__entry->pteval)
+	);
+
+#define DEFINE_XEN_MMU_SET_PTE(name)				\
+	DEFINE_EVENT(xen_mmu__set_pte, name,			\
+		     TP_PROTO(pte_t *ptep, pte_t pteval),	\
+		     TP_ARGS(ptep, pteval))
+
+DEFINE_XEN_MMU_SET_PTE(xen_mmu_set_pte);
+DEFINE_XEN_MMU_SET_PTE(xen_mmu_set_pte_atomic);
+
+TRACE_EVENT(xen_mmu_set_domain_pte,
+	    TP_PROTO(pte_t *ptep, pte_t pteval, unsigned domid),
+	    TP_ARGS(ptep, pteval, domid),
+	    TP_STRUCT__entry(
+		    __field(pte_t *, ptep)
+		    __field(pteval_t, pteval)
+		    __field(unsigned, domid)
+		    ),
+	    TP_fast_assign(__entry->ptep = ptep;
+			   __entry->pteval = pteval.pte;
+			   __entry->domid = domid),
+	    TP_printk("ptep %p pteval %0*llx (raw %0*llx) domid %u",
+		      __entry->ptep,
+		      (int)sizeof(pteval_t) * 2, (unsigned long long)pte_val(native_make_pte(__entry->pteval)),
+		      (int)sizeof(pteval_t) * 2, (unsigned long long)__entry->pteval,
+		      __entry->domid)
+	);
+
+TRACE_EVENT(xen_mmu_set_pte_at,
+	    TP_PROTO(struct mm_struct *mm, unsigned long addr,
+		     pte_t *ptep, pte_t pteval),
+	    TP_ARGS(mm, addr, ptep, pteval),
+	    TP_STRUCT__entry(
+		    __field(struct mm_struct *, mm)
+		    __field(unsigned long, addr)
+		    __field(pte_t *, ptep)
+		    __field(pteval_t, pteval)
+		    ),
+	    TP_fast_assign(__entry->mm = mm;
+			   __entry->addr = addr;
+			   __entry->ptep = ptep;
+			   __entry->pteval = pteval.pte),
+	    TP_printk("mm %p addr %lx ptep %p pteval %0*llx (raw %0*llx)",
+		      __entry->mm, __entry->addr, __entry->ptep,
+		      (int)sizeof(pteval_t) * 2, (unsigned long long)pte_val(native_make_pte(__entry->pteval)),
+		      (int)sizeof(pteval_t) * 2, (unsigned long long)__entry->pteval)
+	);
+
+TRACE_EVENT(xen_mmu_pte_clear,
+	    TP_PROTO(struct mm_struct *mm, unsigned long addr, pte_t *ptep),
+	    TP_ARGS(mm, addr, ptep),
+	    TP_STRUCT__entry(
+		    __field(struct mm_struct *, mm)
+		    __field(unsigned long, addr)
+		    __field(pte_t *, ptep)
+		    ),
+	    TP_fast_assign(__entry->mm = mm;
+			   __entry->addr = addr;
+			   __entry->ptep = ptep),
+	    TP_printk("mm %p addr %lx ptep %p",
+		      __entry->mm, __entry->addr, __entry->ptep)
+	);
+
+TRACE_EVENT(xen_mmu_set_pmd,
+	    TP_PROTO(pmd_t *pmdp, pmd_t pmdval),
+	    TP_ARGS(pmdp, pmdval),
+	    TP_STRUCT__entry(
+		    __field(pmd_t *, pmdp)
+		    __field(pmdval_t, pmdval)
+		    ),
+	    TP_fast_assign(__entry->pmdp = pmdp;
+			   __entry->pmdval = pmdval.pmd),
+	    TP_printk("pmdp %p pmdval %0*llx (raw %0*llx)",
+		      __entry->pmdp,
+		      (int)sizeof(pmdval_t) * 2, (unsigned long long)pmd_val(native_make_pmd(__entry->pmdval)),
+		      (int)sizeof(pmdval_t) * 2, (unsigned long long)__entry->pmdval)
+	);
+
+TRACE_EVENT(xen_mmu_pmd_clear,
+	    TP_PROTO(pmd_t *pmdp),
+	    TP_ARGS(pmdp),
+	    TP_STRUCT__entry(
+		    __field(pmd_t *, pmdp)
+		    ),
+	    TP_fast_assign(__entry->pmdp = pmdp),
+	    TP_printk("pmdp %p", __entry->pmdp)
+	);
+
+#if PAGETABLE_LEVELS >= 4
+
+TRACE_EVENT(xen_mmu_set_pud,
+	    TP_PROTO(pud_t *pudp, pud_t pudval),
+	    TP_ARGS(pudp, pudval),
+	    TP_STRUCT__entry(
+		    __field(pud_t *, pudp)
+		    __field(pudval_t, pudval)
+		    ),
+	    TP_fast_assign(__entry->pudp = pudp;
+			   __entry->pudval = native_pud_val(pudval)),
+	    TP_printk("pudp %p pudval %0*llx (raw %0*llx)",
+		      __entry->pudp,
+		      (int)sizeof(pudval_t) * 2, (unsigned long long)pud_val(native_make_pud(__entry->pudval)),
+		      (int)sizeof(pudval_t) * 2, (unsigned long long)__entry->pudval)
+	);
+
+TRACE_EVENT(xen_mmu_set_pgd,
+	    TP_PROTO(pgd_t *pgdp, pgd_t *user_pgdp, pgd_t pgdval),
+	    TP_ARGS(pgdp, user_pgdp, pgdval),
+	    TP_STRUCT__entry(
+		    __field(pgd_t *, pgdp)
+		    __field(pgd_t *, user_pgdp)
+		    __field(pgdval_t, pgdval)
+		    ),
+	    TP_fast_assign(__entry->pgdp = pgdp;
+			   __entry->user_pgdp = user_pgdp;
+			   __entry->pgdval = pgdval.pgd),
+	    TP_printk("pgdp %p user_pgdp %p pgdval %0*llx (raw %0*llx)",
+		      __entry->pgdp, __entry->user_pgdp,
+		      (int)sizeof(pgdval_t) * 2, (unsigned long long)pgd_val(native_make_pgd(__entry->pgdval)),
+		      (int)sizeof(pgdval_t) * 2, (unsigned long long)__entry->pgdval)
+	);
+
+TRACE_EVENT(xen_mmu_pud_clear,
+	    TP_PROTO(pud_t *pudp),
+	    TP_ARGS(pudp),
+	    TP_STRUCT__entry(
+		    __field(pud_t *, pudp)
+		    ),
+	    TP_fast_assign(__entry->pudp = pudp),
+	    TP_printk("pudp %p", __entry->pudp)
+	);
+#else
+
+TRACE_EVENT(xen_mmu_set_pud,
+	    TP_PROTO(pud_t *pudp, pud_t pudval),
+	    TP_ARGS(pudp, pudval),
+	    TP_STRUCT__entry(
+		    __field(pud_t *, pudp)
+		    __field(pudval_t, pudval)
+		    ),
+	    TP_fast_assign(__entry->pudp = pudp;
+			   __entry->pudval = native_pud_val(pudval)),
+	    TP_printk("pudp %p pudval %0*llx (raw %0*llx)",
+		      __entry->pudp,
+		      (int)sizeof(pudval_t) * 2, (unsigned long long)pgd_val(native_make_pgd(__entry->pudval)),
+		      (int)sizeof(pudval_t) * 2, (unsigned long long)__entry->pudval)
+	);
+
+#endif
+
+TRACE_EVENT(xen_mmu_pgd_clear,
+	    TP_PROTO(pgd_t *pgdp),
+	    TP_ARGS(pgdp),
+	    TP_STRUCT__entry(
+		    __field(pgd_t *, pgdp)
+		    ),
+	    TP_fast_assign(__entry->pgdp = pgdp),
+	    TP_printk("pgdp %p", __entry->pgdp)
+	);
+
+DECLARE_EVENT_CLASS(xen_mmu_ptep_modify_prot,
+	    TP_PROTO(struct mm_struct *mm, unsigned long addr,
+		     pte_t *ptep, pte_t pteval),
+	    TP_ARGS(mm, addr, ptep, pteval),
+	    TP_STRUCT__entry(
+		    __field(struct mm_struct *, mm)
+		    __field(unsigned long, addr)
+		    __field(pte_t *, ptep)
+		    __field(pteval_t, pteval)
+		    ),
+	    TP_fast_assign(__entry->mm = mm;
+			   __entry->addr = addr;
+			   __entry->ptep = ptep;
+			   __entry->pteval = pteval.pte),
+	    TP_printk("mm %p addr %lx ptep %p pteval %0*llx (raw %0*llx)",
+		      __entry->mm, __entry->addr, __entry->ptep,
+		      (int)sizeof(pteval_t) * 2, (unsigned long long)pte_val(native_make_pte(__entry->pteval)),
+		      (int)sizeof(pteval_t) * 2, (unsigned long long)__entry->pteval)
+	);
+#define DEFINE_XEN_MMU_PTEP_MODIFY_PROT(name)				\
+	DEFINE_EVENT(xen_mmu_ptep_modify_prot, name,			\
+		     TP_PROTO(struct mm_struct *mm, unsigned long addr,	\
+			      pte_t *ptep, pte_t pteval),		\
+		     TP_ARGS(mm, addr, ptep, pteval))
+
+DEFINE_XEN_MMU_PTEP_MODIFY_PROT(xen_mmu_ptep_modify_prot_start);
+DEFINE_XEN_MMU_PTEP_MODIFY_PROT(xen_mmu_ptep_modify_prot_commit);
+
+TRACE_EVENT(xen_mmu_alloc_ptpage,
+	    TP_PROTO(struct mm_struct *mm, unsigned long pfn, unsigned level, bool pinned),
+	    TP_ARGS(mm, pfn, level, pinned),
+	    TP_STRUCT__entry(
+		    __field(struct mm_struct *, mm)
+		    __field(unsigned long, pfn)
+		    __field(unsigned, level)
+		    __field(bool, pinned)
+		    ),
+	    TP_fast_assign(__entry->mm = mm;
+			   __entry->pfn = pfn;
+			   __entry->level = level;
+			   __entry->pinned = pinned),
+	    TP_printk("mm %p  pfn %lx  level %d  %spinned",
+		      __entry->mm, __entry->pfn, __entry->level,
+		      __entry->pinned ? "" : "un")
+	);
+
+TRACE_EVENT(xen_mmu_release_ptpage,
+	    TP_PROTO(unsigned long pfn, unsigned level, bool pinned),
+	    TP_ARGS(pfn, level, pinned),
+	    TP_STRUCT__entry(
+		    __field(unsigned long, pfn)
+		    __field(unsigned, level)
+		    __field(bool, pinned)
+		    ),
+	    TP_fast_assign(__entry->pfn = pfn;
+			   __entry->level = level;
+			   __entry->pinned = pinned),
+	    TP_printk("pfn %lx  level %d  %spinned",
+		      __entry->pfn, __entry->level,
+		      __entry->pinned ? "" : "un")
+	);
+
+DECLARE_EVENT_CLASS(xen_mmu_pgd,
+	    TP_PROTO(struct mm_struct *mm, pgd_t *pgd),
+	    TP_ARGS(mm, pgd),
+	    TP_STRUCT__entry(
+		    __field(struct mm_struct *, mm)
+		    __field(pgd_t *, pgd)
+		    ),
+	    TP_fast_assign(__entry->mm = mm;
+			   __entry->pgd = pgd),
+	    TP_printk("mm %p pgd %p", __entry->mm, __entry->pgd)
+	);
+#define DEFINE_XEN_MMU_PGD_EVENT(name)				\
+	DEFINE_EVENT(xen_mmu_pgd, name,				\
+		TP_PROTO(struct mm_struct *mm, pgd_t *pgd),	\
+		     TP_ARGS(mm, pgd))
+
+DEFINE_XEN_MMU_PGD_EVENT(xen_mmu_pgd_pin);
+DEFINE_XEN_MMU_PGD_EVENT(xen_mmu_pgd_unpin);
+
+TRACE_EVENT(xen_mmu_flush_tlb,
+	    TP_PROTO(int x),
+	    TP_ARGS(x),
+	    TP_STRUCT__entry(__array(char, x, 0)),
+	    TP_fast_assign((void)x),
+	    TP_printk("%s", "")
+	);
+
+TRACE_EVENT(xen_mmu_flush_tlb_single,
+	    TP_PROTO(unsigned long addr),
+	    TP_ARGS(addr),
+	    TP_STRUCT__entry(
+		    __field(unsigned long, addr)
+		    ),
+	    TP_fast_assign(__entry->addr = addr),
+	    TP_printk("addr %lx", __entry->addr)
+	);
+
+TRACE_EVENT(xen_mmu_flush_tlb_others,
+	    TP_PROTO(const struct cpumask *cpus, struct mm_struct *mm,
+		     unsigned long addr),
+	    TP_ARGS(cpus, mm, addr),
+	    TP_STRUCT__entry(
+		    __field(unsigned, ncpus)
+		    __field(struct mm_struct *, mm)
+		    __field(unsigned long, addr)
+		    ),
+	    TP_fast_assign(__entry->ncpus = cpumask_weight(cpus);
+			   __entry->mm = mm;
+			   __entry->addr = addr),
+	    TP_printk("ncpus %d mm %p addr %lx",
+		      __entry->ncpus, __entry->mm, __entry->addr)
+	);
+
+TRACE_EVENT(xen_mmu_write_cr3,
+	    TP_PROTO(bool kernel, unsigned long cr3),
+	    TP_ARGS(kernel, cr3),
+	    TP_STRUCT__entry(
+		    __field(bool, kernel)
+		    __field(unsigned long, cr3)
+		    ),
+	    TP_fast_assign(__entry->kernel = kernel;
+			   __entry->cr3 = cr3),
+	    TP_printk("%s cr3 %lx",
+		      __entry->kernel ? "kernel" : "user", __entry->cr3)
+	);
+
+
+/* CPU */
+TRACE_EVENT(xen_cpu_write_ldt_entry,
+	    TP_PROTO(struct desc_struct *dt, int entrynum, u64 desc),
+	    TP_ARGS(dt, entrynum, desc),
+	    TP_STRUCT__entry(
+		    __field(struct desc_struct *, dt)
+		    __field(int, entrynum)
+		    __field(u64, desc)
+		    ),
+	    TP_fast_assign(__entry->dt = dt;
+			   __entry->entrynum = entrynum;
+			   __entry->desc = desc;
+		    ),
+	    TP_printk("dt %p  entrynum %d  entry %016llx",
+		      __entry->dt, __entry->entrynum,
+		      (unsigned long long)__entry->desc)
+	);
+
+TRACE_EVENT(xen_cpu_write_idt_entry,
+	    TP_PROTO(gate_desc *dt, int entrynum, const gate_desc *ent),
+	    TP_ARGS(dt, entrynum, ent),
+	    TP_STRUCT__entry(
+		    __field(gate_desc *, dt)
+		    __field(int, entrynum)
+		    ),
+	    TP_fast_assign(__entry->dt = dt;
+			   __entry->entrynum = entrynum;
+		    ),
+	    TP_printk("dt %p  entrynum %d",
+		      __entry->dt, __entry->entrynum)
+	);
+
+TRACE_EVENT(xen_cpu_load_idt,
+	    TP_PROTO(const struct desc_ptr *desc),
+	    TP_ARGS(desc),
+	    TP_STRUCT__entry(
+		    __field(unsigned long, addr)
+		    ),
+	    TP_fast_assign(__entry->addr = desc->address),
+	    TP_printk("addr %lx", __entry->addr)
+	);
+
+TRACE_EVENT(xen_cpu_write_gdt_entry,
+	    TP_PROTO(struct desc_struct *dt, int entrynum, const void *desc, int type),
+	    TP_ARGS(dt, entrynum, desc, type),
+	    TP_STRUCT__entry(
+		    __field(u64, desc)
+		    __field(struct desc_struct *, dt)
+		    __field(int, entrynum)
+		    __field(int, type)
+		    ),
+	    TP_fast_assign(__entry->dt = dt;
+			   __entry->entrynum = entrynum;
+			   __entry->desc = *(u64 *)desc;
+			   __entry->type = type;
+		    ),
+	    TP_printk("dt %p  entrynum %d  type %d  desc %016llx",
+		      __entry->dt, __entry->entrynum, __entry->type,
+		      (unsigned long long)__entry->desc)
+	);
+
+TRACE_EVENT(xen_cpu_set_ldt,
+	    TP_PROTO(const void *addr, unsigned entries),
+	    TP_ARGS(addr, entries),
+	    TP_STRUCT__entry(
+		    __field(const void *, addr)
+		    __field(unsigned, entries)
+		    ),
+	    TP_fast_assign(__entry->addr = addr;
+			   __entry->entries = entries),
+	    TP_printk("addr %p  entries %u",
+		      __entry->addr, __entry->entries)
+	);
+
+
+#endif /*  _TRACE_XEN_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h
new file mode 100644
index 00000000..76972494
--- /dev/null
+++ b/include/trace/ftrace.h
@@ -0,0 +1,778 @@
+/*
+ * Stage 1 of the trace events.
+ *
+ * Override the macros in <trace/trace_events.h> to include the following:
+ *
+ * struct ftrace_raw_<call> {
+ *	struct trace_entry		ent;
+ *	<type>				<item>;
+ *	<type2>				<item2>[<len>];
+ *	[...]
+ * };
+ *
+ * The <type> <item> is created by the __field(type, item) macro or
+ * the __array(type2, item2, len) macro.
+ * We simply do "type item;", and that will create the fields
+ * in the structure.
+ */
+
+#include <linux/ftrace_event.h>
+
+/*
+ * DECLARE_EVENT_CLASS can be used to add a generic function
+ * handlers for events. That is, if all events have the same
+ * parameters and just have distinct trace points.
+ * Each tracepoint can be defined with DEFINE_EVENT and that
+ * will map the DECLARE_EVENT_CLASS to the tracepoint.
+ *
+ * TRACE_EVENT is a one to one mapping between tracepoint and template.
+ */
+#undef TRACE_EVENT
+#define TRACE_EVENT(name, proto, args, tstruct, assign, print) \
+	DECLARE_EVENT_CLASS(name,			       \
+			     PARAMS(proto),		       \
+			     PARAMS(args),		       \
+			     PARAMS(tstruct),		       \
+			     PARAMS(assign),		       \
+			     PARAMS(print));		       \
+	DEFINE_EVENT(name, name, PARAMS(proto), PARAMS(args));
+
+
+#undef __field
+#define __field(type, item)		type	item;
+
+#undef __field_ext
+#define __field_ext(type, item, filter_type)	type	item;
+
+#undef __array
+#define __array(type, item, len)	type	item[len];
+
+#undef __dynamic_array
+#define __dynamic_array(type, item, len) u32 __data_loc_##item;
+
+#undef __string
+#define __string(item, src) __dynamic_array(char, item, -1)
+
+#undef TP_STRUCT__entry
+#define TP_STRUCT__entry(args...) args
+
+#undef DECLARE_EVENT_CLASS
+#define DECLARE_EVENT_CLASS(name, proto, args, tstruct, assign, print)	\
+	struct ftrace_raw_##name {					\
+		struct trace_entry	ent;				\
+		tstruct							\
+		char			__data[0];			\
+	};								\
+									\
+	static struct ftrace_event_class event_class_##name;
+
+#undef DEFINE_EVENT
+#define DEFINE_EVENT(template, name, proto, args)	\
+	static struct ftrace_event_call	__used		\
+	__attribute__((__aligned__(4))) event_##name
+
+#undef DEFINE_EVENT_PRINT
+#define DEFINE_EVENT_PRINT(template, name, proto, args, print)	\
+	DEFINE_EVENT(template, name, PARAMS(proto), PARAMS(args))
+
+/* Callbacks are meaningless to ftrace. */
+#undef TRACE_EVENT_FN
+#define TRACE_EVENT_FN(name, proto, args, tstruct,			\
+		assign, print, reg, unreg)				\
+	TRACE_EVENT(name, PARAMS(proto), PARAMS(args),			\
+		PARAMS(tstruct), PARAMS(assign), PARAMS(print))		\
+
+#undef TRACE_EVENT_FLAGS
+#define TRACE_EVENT_FLAGS(name, value)					\
+	__TRACE_EVENT_FLAGS(name, value)
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+
+
+/*
+ * Stage 2 of the trace events.
+ *
+ * Include the following:
+ *
+ * struct ftrace_data_offsets_<call> {
+ *	u32				<item1>;
+ *	u32				<item2>;
+ *	[...]
+ * };
+ *
+ * The __dynamic_array() macro will create each u32 <item>, this is
+ * to keep the offset of each array from the beginning of the event.
+ * The size of an array is also encoded, in the higher 16 bits of <item>.
+ */
+
+#undef __field
+#define __field(type, item)
+
+#undef __field_ext
+#define __field_ext(type, item, filter_type)
+
+#undef __array
+#define __array(type, item, len)
+
+#undef __dynamic_array
+#define __dynamic_array(type, item, len)	u32 item;
+
+#undef __string
+#define __string(item, src) __dynamic_array(char, item, -1)
+
+#undef DECLARE_EVENT_CLASS
+#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print)	\
+	struct ftrace_data_offsets_##call {				\
+		tstruct;						\
+	};
+
+#undef DEFINE_EVENT
+#define DEFINE_EVENT(template, name, proto, args)
+
+#undef DEFINE_EVENT_PRINT
+#define DEFINE_EVENT_PRINT(template, name, proto, args, print)	\
+	DEFINE_EVENT(template, name, PARAMS(proto), PARAMS(args))
+
+#undef TRACE_EVENT_FLAGS
+#define TRACE_EVENT_FLAGS(event, flag)
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+
+/*
+ * Stage 3 of the trace events.
+ *
+ * Override the macros in <trace/trace_events.h> to include the following:
+ *
+ * enum print_line_t
+ * ftrace_raw_output_<call>(struct trace_iterator *iter, int flags)
+ * {
+ *	struct trace_seq *s = &iter->seq;
+ *	struct ftrace_raw_<call> *field; <-- defined in stage 1
+ *	struct trace_entry *entry;
+ *	struct trace_seq *p = &iter->tmp_seq;
+ *	int ret;
+ *
+ *	entry = iter->ent;
+ *
+ *	if (entry->type != event_<call>->event.type) {
+ *		WARN_ON_ONCE(1);
+ *		return TRACE_TYPE_UNHANDLED;
+ *	}
+ *
+ *	field = (typeof(field))entry;
+ *
+ *	trace_seq_init(p);
+ *	ret = trace_seq_printf(s, "%s: ", <call>);
+ *	if (ret)
+ *		ret = trace_seq_printf(s, <TP_printk> "\n");
+ *	if (!ret)
+ *		return TRACE_TYPE_PARTIAL_LINE;
+ *
+ *	return TRACE_TYPE_HANDLED;
+ * }
+ *
+ * This is the method used to print the raw event to the trace
+ * output format. Note, this is not needed if the data is read
+ * in binary.
+ */
+
+#undef __entry
+#define __entry field
+
+#undef TP_printk
+#define TP_printk(fmt, args...) fmt "\n", args
+
+#undef __get_dynamic_array
+#define __get_dynamic_array(field)	\
+		((void *)__entry + (__entry->__data_loc_##field & 0xffff))
+
+#undef __get_str
+#define __get_str(field) (char *)__get_dynamic_array(field)
+
+#undef __print_flags
+#define __print_flags(flag, delim, flag_array...)			\
+	({								\
+		static const struct trace_print_flags __flags[] =	\
+			{ flag_array, { -1, NULL }};			\
+		ftrace_print_flags_seq(p, delim, flag, __flags);	\
+	})
+
+#undef __print_symbolic
+#define __print_symbolic(value, symbol_array...)			\
+	({								\
+		static const struct trace_print_flags symbols[] =	\
+			{ symbol_array, { -1, NULL }};			\
+		ftrace_print_symbols_seq(p, value, symbols);		\
+	})
+
+#undef __print_symbolic_u64
+#if BITS_PER_LONG == 32
+#define __print_symbolic_u64(value, symbol_array...)			\
+	({								\
+		static const struct trace_print_flags_u64 symbols[] =	\
+			{ symbol_array, { -1, NULL } };			\
+		ftrace_print_symbols_seq_u64(p, value, symbols);	\
+	})
+#else
+#define __print_symbolic_u64(value, symbol_array...)			\
+			__print_symbolic(value, symbol_array)
+#endif
+
+#undef __print_hex
+#define __print_hex(buf, buf_len) ftrace_print_hex_seq(p, buf, buf_len)
+
+#undef DECLARE_EVENT_CLASS
+#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print)	\
+static notrace enum print_line_t					\
+ftrace_raw_output_##call(struct trace_iterator *iter, int flags,	\
+			 struct trace_event *trace_event)		\
+{									\
+	struct ftrace_event_call *event;				\
+	struct trace_seq *s = &iter->seq;				\
+	struct ftrace_raw_##call *field;				\
+	struct trace_entry *entry;					\
+	struct trace_seq *p = &iter->tmp_seq;				\
+	int ret;							\
+									\
+	event = container_of(trace_event, struct ftrace_event_call,	\
+			     event);					\
+									\
+	entry = iter->ent;						\
+									\
+	if (entry->type != event->event.type) {				\
+		WARN_ON_ONCE(1);					\
+		return TRACE_TYPE_UNHANDLED;				\
+	}								\
+									\
+	field = (typeof(field))entry;					\
+									\
+	trace_seq_init(p);						\
+	ret = trace_seq_printf(s, "%s: ", event->name);			\
+	if (ret)							\
+		ret = trace_seq_printf(s, print);			\
+	if (!ret)							\
+		return TRACE_TYPE_PARTIAL_LINE;				\
+									\
+	return TRACE_TYPE_HANDLED;					\
+}									\
+static struct trace_event_functions ftrace_event_type_funcs_##call = {	\
+	.trace			= ftrace_raw_output_##call,		\
+};
+
+#undef DEFINE_EVENT_PRINT
+#define DEFINE_EVENT_PRINT(template, call, proto, args, print)		\
+static notrace enum print_line_t					\
+ftrace_raw_output_##call(struct trace_iterator *iter, int flags,	\
+			 struct trace_event *event)			\
+{									\
+	struct trace_seq *s = &iter->seq;				\
+	struct ftrace_raw_##template *field;				\
+	struct trace_entry *entry;					\
+	struct trace_seq *p = &iter->tmp_seq;				\
+	int ret;							\
+									\
+	entry = iter->ent;						\
+									\
+	if (entry->type != event_##call.event.type) {			\
+		WARN_ON_ONCE(1);					\
+		return TRACE_TYPE_UNHANDLED;				\
+	}								\
+									\
+	field = (typeof(field))entry;					\
+									\
+	trace_seq_init(p);						\
+	ret = trace_seq_printf(s, "%s: ", #call);			\
+	if (ret)							\
+		ret = trace_seq_printf(s, print);			\
+	if (!ret)							\
+		return TRACE_TYPE_PARTIAL_LINE;				\
+									\
+	return TRACE_TYPE_HANDLED;					\
+}									\
+static struct trace_event_functions ftrace_event_type_funcs_##call = {	\
+	.trace			= ftrace_raw_output_##call,		\
+};
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+
+#undef __field_ext
+#define __field_ext(type, item, filter_type)				\
+	ret = trace_define_field(event_call, #type, #item,		\
+				 offsetof(typeof(field), item),		\
+				 sizeof(field.item),			\
+				 is_signed_type(type), filter_type);	\
+	if (ret)							\
+		return ret;
+
+#undef __field
+#define __field(type, item)	__field_ext(type, item, FILTER_OTHER)
+
+#undef __array
+#define __array(type, item, len)					\
+	do {								\
+		mutex_lock(&event_storage_mutex);			\
+		BUILD_BUG_ON(len > MAX_FILTER_STR_VAL);			\
+		snprintf(event_storage, sizeof(event_storage),		\
+			 "%s[%d]", #type, len);				\
+		ret = trace_define_field(event_call, event_storage, #item, \
+				 offsetof(typeof(field), item),		\
+				 sizeof(field.item),			\
+				 is_signed_type(type), FILTER_OTHER);	\
+		mutex_unlock(&event_storage_mutex);			\
+		if (ret)						\
+			return ret;					\
+	} while (0);
+
+#undef __dynamic_array
+#define __dynamic_array(type, item, len)				       \
+	ret = trace_define_field(event_call, "__data_loc " #type "[]", #item,  \
+				 offsetof(typeof(field), __data_loc_##item),   \
+				 sizeof(field.__data_loc_##item),	       \
+				 is_signed_type(type), FILTER_OTHER);
+
+#undef __string
+#define __string(item, src) __dynamic_array(char, item, -1)
+
+#undef DECLARE_EVENT_CLASS
+#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, func, print)	\
+static int notrace							\
+ftrace_define_fields_##call(struct ftrace_event_call *event_call)	\
+{									\
+	struct ftrace_raw_##call field;					\
+	int ret;							\
+									\
+	tstruct;							\
+									\
+	return ret;							\
+}
+
+#undef DEFINE_EVENT
+#define DEFINE_EVENT(template, name, proto, args)
+
+#undef DEFINE_EVENT_PRINT
+#define DEFINE_EVENT_PRINT(template, name, proto, args, print)	\
+	DEFINE_EVENT(template, name, PARAMS(proto), PARAMS(args))
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+
+/*
+ * remember the offset of each array from the beginning of the event.
+ */
+
+#undef __entry
+#define __entry entry
+
+#undef __field
+#define __field(type, item)
+
+#undef __field_ext
+#define __field_ext(type, item, filter_type)
+
+#undef __array
+#define __array(type, item, len)
+
+#undef __dynamic_array
+#define __dynamic_array(type, item, len)				\
+	__data_offsets->item = __data_size +				\
+			       offsetof(typeof(*entry), __data);	\
+	__data_offsets->item |= (len * sizeof(type)) << 16;		\
+	__data_size += (len) * sizeof(type);
+
+#undef __string
+#define __string(item, src) __dynamic_array(char, item, strlen(src) + 1)
+
+#undef DECLARE_EVENT_CLASS
+#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print)	\
+static inline notrace int ftrace_get_offsets_##call(			\
+	struct ftrace_data_offsets_##call *__data_offsets, proto)       \
+{									\
+	int __data_size = 0;						\
+	struct ftrace_raw_##call __maybe_unused *entry;			\
+									\
+	tstruct;							\
+									\
+	return __data_size;						\
+}
+
+#undef DEFINE_EVENT
+#define DEFINE_EVENT(template, name, proto, args)
+
+#undef DEFINE_EVENT_PRINT
+#define DEFINE_EVENT_PRINT(template, name, proto, args, print)	\
+	DEFINE_EVENT(template, name, PARAMS(proto), PARAMS(args))
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+
+/*
+ * Stage 4 of the trace events.
+ *
+ * Override the macros in <trace/trace_events.h> to include the following:
+ *
+ * For those macros defined with TRACE_EVENT:
+ *
+ * static struct ftrace_event_call event_<call>;
+ *
+ * static void ftrace_raw_event_<call>(void *__data, proto)
+ * {
+ *	struct ftrace_event_call *event_call = __data;
+ *	struct ftrace_data_offsets_<call> __maybe_unused __data_offsets;
+ *	struct ring_buffer_event *event;
+ *	struct ftrace_raw_<call> *entry; <-- defined in stage 1
+ *	struct ring_buffer *buffer;
+ *	unsigned long irq_flags;
+ *	int __data_size;
+ *	int pc;
+ *
+ *	local_save_flags(irq_flags);
+ *	pc = preempt_count();
+ *
+ *	__data_size = ftrace_get_offsets_<call>(&__data_offsets, args);
+ *
+ *	event = trace_current_buffer_lock_reserve(&buffer,
+ *				  event_<call>->event.type,
+ *				  sizeof(*entry) + __data_size,
+ *				  irq_flags, pc);
+ *	if (!event)
+ *		return;
+ *	entry	= ring_buffer_event_data(event);
+ *
+ *	{ <assign>; }  <-- Here we assign the entries by the __field and
+ *			   __array macros.
+ *
+ *	if (!filter_current_check_discard(buffer, event_call, entry, event))
+ *		trace_current_buffer_unlock_commit(buffer,
+ *						   event, irq_flags, pc);
+ * }
+ *
+ * static struct trace_event ftrace_event_type_<call> = {
+ *	.trace			= ftrace_raw_output_<call>, <-- stage 2
+ * };
+ *
+ * static const char print_fmt_<call>[] = <TP_printk>;
+ *
+ * static struct ftrace_event_class __used event_class_<template> = {
+ *	.system			= "<system>",
+ *	.define_fields		= ftrace_define_fields_<call>,
+ *	.fields			= LIST_HEAD_INIT(event_class_##call.fields),
+ *	.raw_init		= trace_event_raw_init,
+ *	.probe			= ftrace_raw_event_##call,
+ *	.reg			= ftrace_event_reg,
+ * };
+ *
+ * static struct ftrace_event_call event_<call> = {
+ *	.name			= "<call>",
+ *	.class			= event_class_<template>,
+ *	.event			= &ftrace_event_type_<call>,
+ *	.print_fmt		= print_fmt_<call>,
+ * };
+ * // its only safe to use pointers when doing linker tricks to
+ * // create an array.
+ * static struct ftrace_event_call __used
+ * __attribute__((section("_ftrace_events"))) *__event_<call> = &event_<call>;
+ *
+ */
+
+#ifdef CONFIG_PERF_EVENTS
+
+#define _TRACE_PERF_PROTO(call, proto)					\
+	static notrace void						\
+	perf_trace_##call(void *__data, proto);
+
+#define _TRACE_PERF_INIT(call)						\
+	.perf_probe		= perf_trace_##call,
+
+#else
+#define _TRACE_PERF_PROTO(call, proto)
+#define _TRACE_PERF_INIT(call)
+#endif /* CONFIG_PERF_EVENTS */
+
+#undef __entry
+#define __entry entry
+
+#undef __field
+#define __field(type, item)
+
+#undef __array
+#define __array(type, item, len)
+
+#undef __dynamic_array
+#define __dynamic_array(type, item, len)				\
+	__entry->__data_loc_##item = __data_offsets.item;
+
+#undef __string
+#define __string(item, src) __dynamic_array(char, item, -1)       	\
+
+#undef __assign_str
+#define __assign_str(dst, src)						\
+	strcpy(__get_str(dst), src);
+
+#undef TP_fast_assign
+#define TP_fast_assign(args...) args
+
+#undef TP_perf_assign
+#define TP_perf_assign(args...)
+
+#undef DECLARE_EVENT_CLASS
+#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print)	\
+									\
+static notrace void							\
+ftrace_raw_event_##call(void *__data, proto)				\
+{									\
+	struct ftrace_event_call *event_call = __data;			\
+	struct ftrace_data_offsets_##call __maybe_unused __data_offsets;\
+	struct ring_buffer_event *event;				\
+	struct ftrace_raw_##call *entry;				\
+	struct ring_buffer *buffer;					\
+	unsigned long irq_flags;					\
+	int __data_size;						\
+	int pc;								\
+									\
+	local_save_flags(irq_flags);					\
+	pc = preempt_count();						\
+									\
+	__data_size = ftrace_get_offsets_##call(&__data_offsets, args); \
+									\
+	event = trace_current_buffer_lock_reserve(&buffer,		\
+				 event_call->event.type,		\
+				 sizeof(*entry) + __data_size,		\
+				 irq_flags, pc);			\
+	if (!event)							\
+		return;							\
+	entry	= ring_buffer_event_data(event);			\
+									\
+	tstruct								\
+									\
+	{ assign; }							\
+									\
+	if (!filter_current_check_discard(buffer, event_call, entry, event)) \
+		trace_nowake_buffer_unlock_commit(buffer,		\
+						  event, irq_flags, pc); \
+}
+/*
+ * The ftrace_test_probe is compiled out, it is only here as a build time check
+ * to make sure that if the tracepoint handling changes, the ftrace probe will
+ * fail to compile unless it too is updated.
+ */
+
+#undef DEFINE_EVENT
+#define DEFINE_EVENT(template, call, proto, args)			\
+static inline void ftrace_test_probe_##call(void)			\
+{									\
+	check_trace_callback_type_##call(ftrace_raw_event_##template);	\
+}
+
+#undef DEFINE_EVENT_PRINT
+#define DEFINE_EVENT_PRINT(template, name, proto, args, print)
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+
+#undef __entry
+#define __entry REC
+
+#undef __print_flags
+#undef __print_symbolic
+#undef __get_dynamic_array
+#undef __get_str
+
+#undef TP_printk
+#define TP_printk(fmt, args...) "\"" fmt "\", "  __stringify(args)
+
+#undef DECLARE_EVENT_CLASS
+#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print)	\
+_TRACE_PERF_PROTO(call, PARAMS(proto));					\
+static const char print_fmt_##call[] = print;				\
+static struct ftrace_event_class __used event_class_##call = {		\
+	.system			= __stringify(TRACE_SYSTEM),		\
+	.define_fields		= ftrace_define_fields_##call,		\
+	.fields			= LIST_HEAD_INIT(event_class_##call.fields),\
+	.raw_init		= trace_event_raw_init,			\
+	.probe			= ftrace_raw_event_##call,		\
+	.reg			= ftrace_event_reg,			\
+	_TRACE_PERF_INIT(call)						\
+};
+
+#undef DEFINE_EVENT
+#define DEFINE_EVENT(template, call, proto, args)			\
+									\
+static struct ftrace_event_call __used event_##call = {			\
+	.name			= #call,				\
+	.class			= &event_class_##template,		\
+	.event.funcs		= &ftrace_event_type_funcs_##template,	\
+	.print_fmt		= print_fmt_##template,			\
+};									\
+static struct ftrace_event_call __used					\
+__attribute__((section("_ftrace_events"))) *__event_##call = &event_##call
+
+#undef DEFINE_EVENT_PRINT
+#define DEFINE_EVENT_PRINT(template, call, proto, args, print)		\
+									\
+static const char print_fmt_##call[] = print;				\
+									\
+static struct ftrace_event_call __used event_##call = {			\
+	.name			= #call,				\
+	.class			= &event_class_##template,		\
+	.event.funcs		= &ftrace_event_type_funcs_##call,	\
+	.print_fmt		= print_fmt_##call,			\
+};									\
+static struct ftrace_event_call __used					\
+__attribute__((section("_ftrace_events"))) *__event_##call = &event_##call
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+
+/*
+ * Define the insertion callback to perf events
+ *
+ * The job is very similar to ftrace_raw_event_<call> except that we don't
+ * insert in the ring buffer but in a perf counter.
+ *
+ * static void ftrace_perf_<call>(proto)
+ * {
+ *	struct ftrace_data_offsets_<call> __maybe_unused __data_offsets;
+ *	struct ftrace_event_call *event_call = &event_<call>;
+ *	extern void perf_tp_event(int, u64, u64, void *, int);
+ *	struct ftrace_raw_##call *entry;
+ *	struct perf_trace_buf *trace_buf;
+ *	u64 __addr = 0, __count = 1;
+ *	unsigned long irq_flags;
+ *	struct trace_entry *ent;
+ *	int __entry_size;
+ *	int __data_size;
+ *	int __cpu
+ *	int pc;
+ *
+ *	pc = preempt_count();
+ *
+ *	__data_size = ftrace_get_offsets_<call>(&__data_offsets, args);
+ *
+ *	// Below we want to get the aligned size by taking into account
+ *	// the u32 field that will later store the buffer size
+ *	__entry_size = ALIGN(__data_size + sizeof(*entry) + sizeof(u32),
+ *			     sizeof(u64));
+ *	__entry_size -= sizeof(u32);
+ *
+ *	// Protect the non nmi buffer
+ *	// This also protects the rcu read side
+ *	local_irq_save(irq_flags);
+ *	__cpu = smp_processor_id();
+ *
+ *	if (in_nmi())
+ *		trace_buf = rcu_dereference_sched(perf_trace_buf_nmi);
+ *	else
+ *		trace_buf = rcu_dereference_sched(perf_trace_buf);
+ *
+ *	if (!trace_buf)
+ *		goto end;
+ *
+ *	trace_buf = per_cpu_ptr(trace_buf, __cpu);
+ *
+ * 	// Avoid recursion from perf that could mess up the buffer
+ * 	if (trace_buf->recursion++)
+ *		goto end_recursion;
+ *
+ * 	raw_data = trace_buf->buf;
+ *
+ *	// Make recursion update visible before entering perf_tp_event
+ *	// so that we protect from perf recursions.
+ *
+ *	barrier();
+ *
+ *	//zero dead bytes from alignment to avoid stack leak to userspace:
+ *	*(u64 *)(&raw_data[__entry_size - sizeof(u64)]) = 0ULL;
+ *	entry = (struct ftrace_raw_<call> *)raw_data;
+ *	ent = &entry->ent;
+ *	tracing_generic_entry_update(ent, irq_flags, pc);
+ *	ent->type = event_call->id;
+ *
+ *	<tstruct> <- do some jobs with dynamic arrays
+ *
+ *	<assign>  <- affect our values
+ *
+ *	perf_tp_event(event_call->id, __addr, __count, entry,
+ *		     __entry_size);  <- submit them to perf counter
+ *
+ * }
+ */
+
+#ifdef CONFIG_PERF_EVENTS
+
+#undef __entry
+#define __entry entry
+
+#undef __get_dynamic_array
+#define __get_dynamic_array(field)	\
+		((void *)__entry + (__entry->__data_loc_##field & 0xffff))
+
+#undef __get_str
+#define __get_str(field) (char *)__get_dynamic_array(field)
+
+#undef __perf_addr
+#define __perf_addr(a) __addr = (a)
+
+#undef __perf_count
+#define __perf_count(c) __count = (c)
+
+#undef TP_perf_assign
+#define TP_perf_assign(args...) args
+
+#undef DECLARE_EVENT_CLASS
+#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print)	\
+static notrace void							\
+perf_trace_##call(void *__data, proto)					\
+{									\
+	struct ftrace_event_call *event_call = __data;			\
+	struct ftrace_data_offsets_##call __maybe_unused __data_offsets;\
+	struct ftrace_raw_##call *entry;				\
+	struct pt_regs __regs;						\
+	u64 __addr = 0, __count = 1;					\
+	struct hlist_head *head;					\
+	int __entry_size;						\
+	int __data_size;						\
+	int rctx;							\
+									\
+	perf_fetch_caller_regs(&__regs);				\
+									\
+	__data_size = ftrace_get_offsets_##call(&__data_offsets, args); \
+	__entry_size = ALIGN(__data_size + sizeof(*entry) + sizeof(u32),\
+			     sizeof(u64));				\
+	__entry_size -= sizeof(u32);					\
+									\
+	if (WARN_ONCE(__entry_size > PERF_MAX_TRACE_SIZE,		\
+		      "profile buffer not large enough"))		\
+		return;							\
+									\
+	entry = (struct ftrace_raw_##call *)perf_trace_buf_prepare(	\
+		__entry_size, event_call->event.type, &__regs, &rctx);	\
+	if (!entry)							\
+		return;							\
+									\
+	tstruct								\
+									\
+	{ assign; }							\
+									\
+	head = this_cpu_ptr(event_call->perf_events);			\
+	perf_trace_buf_submit(entry, __entry_size, rctx, __addr,	\
+		__count, &__regs, head);				\
+}
+
+/*
+ * This part is compiled out, it is only here as a build time check
+ * to make sure that if the tracepoint handling changes, the
+ * perf probe will fail to compile unless it too is updated.
+ */
+#undef DEFINE_EVENT
+#define DEFINE_EVENT(template, call, proto, args)			\
+static inline void perf_test_probe_##call(void)				\
+{									\
+	check_trace_callback_type_##call(perf_trace_##template);	\
+}
+
+
+#undef DEFINE_EVENT_PRINT
+#define DEFINE_EVENT_PRINT(template, name, proto, args, print)	\
+	DEFINE_EVENT(template, name, PARAMS(proto), PARAMS(args))
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+#endif /* CONFIG_PERF_EVENTS */
+
+#undef _TRACE_PROFILE_INIT
+
diff --git a/include/trace/syscall.h b/include/trace/syscall.h
new file mode 100644
index 00000000..31966a4f
--- /dev/null
+++ b/include/trace/syscall.h
@@ -0,0 +1,57 @@
+#ifndef _TRACE_SYSCALL_H
+#define _TRACE_SYSCALL_H
+
+#include <linux/tracepoint.h>
+#include <linux/unistd.h>
+#include <linux/ftrace_event.h>
+
+#include <asm/ptrace.h>
+
+
+/*
+ * A syscall entry in the ftrace syscalls array.
+ *
+ * @name: name of the syscall
+ * @syscall_nr: number of the syscall
+ * @nb_args: number of parameters it takes
+ * @types: list of types as strings
+ * @args: list of args as strings (args[i] matches types[i])
+ * @enter_event: associated syscall_enter trace event
+ * @exit_event: associated syscall_exit trace event
+ */
+struct syscall_metadata {
+	const char	*name;
+	int		syscall_nr;
+	int		nb_args;
+	const char	**types;
+	const char	**args;
+	struct list_head enter_fields;
+
+	struct ftrace_event_call *enter_event;
+	struct ftrace_event_call *exit_event;
+};
+
+#ifdef CONFIG_FTRACE_SYSCALLS
+extern unsigned long arch_syscall_addr(int nr);
+extern int init_syscall_trace(struct ftrace_event_call *call);
+
+extern int reg_event_syscall_enter(struct ftrace_event_call *call);
+extern void unreg_event_syscall_enter(struct ftrace_event_call *call);
+extern int reg_event_syscall_exit(struct ftrace_event_call *call);
+extern void unreg_event_syscall_exit(struct ftrace_event_call *call);
+extern int
+ftrace_format_syscall(struct ftrace_event_call *call, struct trace_seq *s);
+enum print_line_t print_syscall_enter(struct trace_iterator *iter, int flags,
+				      struct trace_event *event);
+enum print_line_t print_syscall_exit(struct trace_iterator *iter, int flags,
+				     struct trace_event *event);
+#endif
+
+#ifdef CONFIG_PERF_EVENTS
+int perf_sysenter_enable(struct ftrace_event_call *call);
+void perf_sysenter_disable(struct ftrace_event_call *call);
+int perf_sysexit_enable(struct ftrace_event_call *call);
+void perf_sysexit_disable(struct ftrace_event_call *call);
+#endif
+
+#endif /* _TRACE_SYSCALL_H */
diff --git a/include/video/Kbuild b/include/video/Kbuild
new file mode 100644
index 00000000..ad3e622c
--- /dev/null
+++ b/include/video/Kbuild
@@ -0,0 +1,3 @@
+header-y += edid.h
+header-y += sisfb.h
+header-y += uvesafb.h
diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h
new file mode 100644
index 00000000..28447f15
--- /dev/null
+++ b/include/video/atmel_lcdc.h
@@ -0,0 +1,219 @@
+/*
+ *  Header file for AT91/AT32 LCD Controller
+ *
+ *  Data structure and register user interface
+ *
+ *  Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ATMEL_LCDC_H__
+#define __ATMEL_LCDC_H__
+
+#include <linux/workqueue.h>
+
+/* Way LCD wires are connected to the chip:
+ * Some Atmel chips use BGR color mode (instead of standard RGB)
+ * A swapped wiring onboard can bring to RGB mode.
+ */
+#define ATMEL_LCDC_WIRING_BGR	0
+#define ATMEL_LCDC_WIRING_RGB	1
+#define ATMEL_LCDC_WIRING_RGB555	2
+
+
+ /* LCD Controller info data structure, stored in device platform_data */
+struct atmel_lcdfb_info {
+	spinlock_t		lock;
+	struct fb_info		*info;
+	void __iomem		*mmio;
+	int			irq_base;
+	struct work_struct	task;
+
+	unsigned int		guard_time;
+	unsigned int 		smem_len;
+	struct platform_device	*pdev;
+	struct clk		*bus_clk;
+	struct clk		*lcdc_clk;
+
+#ifdef CONFIG_BACKLIGHT_ATMEL_LCDC
+	struct backlight_device	*backlight;
+	u8			bl_power;
+#endif
+	bool			lcdcon_is_backlight;
+	bool			lcdcon_pol_negative;
+	u8			saved_lcdcon;
+
+	u8			default_bpp;
+	u8			lcd_wiring_mode;
+	unsigned int		default_lcdcon2;
+	unsigned int		default_dmacon;
+	void (*atmel_lcdfb_power_control)(int on);
+	struct fb_monspecs	*default_monspecs;
+	u32			pseudo_palette[16];
+};
+
+#define ATMEL_LCDC_DMABADDR1	0x00
+#define ATMEL_LCDC_DMABADDR2	0x04
+#define ATMEL_LCDC_DMAFRMPT1	0x08
+#define ATMEL_LCDC_DMAFRMPT2	0x0c
+#define ATMEL_LCDC_DMAFRMADD1	0x10
+#define ATMEL_LCDC_DMAFRMADD2	0x14
+
+#define ATMEL_LCDC_DMAFRMCFG	0x18
+#define	ATMEL_LCDC_FRSIZE	(0x7fffff <<  0)
+#define	ATMEL_LCDC_BLENGTH_OFFSET	24
+#define	ATMEL_LCDC_BLENGTH	(0x7f     << ATMEL_LCDC_BLENGTH_OFFSET)
+
+#define ATMEL_LCDC_DMACON	0x1c
+#define	ATMEL_LCDC_DMAEN	(0x1 << 0)
+#define	ATMEL_LCDC_DMARST	(0x1 << 1)
+#define	ATMEL_LCDC_DMABUSY	(0x1 << 2)
+#define		ATMEL_LCDC_DMAUPDT	(0x1 << 3)
+#define		ATMEL_LCDC_DMA2DEN	(0x1 << 4)
+
+#define ATMEL_LCDC_DMA2DCFG	0x20
+#define		ATMEL_LCDC_ADDRINC_OFFSET	0
+#define		ATMEL_LCDC_ADDRINC		(0xffff)
+#define		ATMEL_LCDC_PIXELOFF_OFFSET	24
+#define		ATMEL_LCDC_PIXELOFF		(0x1f << 24)
+
+#define ATMEL_LCDC_LCDCON1	0x0800
+#define	ATMEL_LCDC_BYPASS	(1     <<  0)
+#define	ATMEL_LCDC_CLKVAL_OFFSET	12
+#define	ATMEL_LCDC_CLKVAL	(0x1ff << ATMEL_LCDC_CLKVAL_OFFSET)
+#define	ATMEL_LCDC_LINCNT	(0x7ff << 21)
+
+#define ATMEL_LCDC_LCDCON2	0x0804
+#define	ATMEL_LCDC_DISTYPE	(3 << 0)
+#define		ATMEL_LCDC_DISTYPE_STNMONO	(0 << 0)
+#define		ATMEL_LCDC_DISTYPE_STNCOLOR	(1 << 0)
+#define		ATMEL_LCDC_DISTYPE_TFT		(2 << 0)
+#define	ATMEL_LCDC_SCANMOD	(1 << 2)
+#define		ATMEL_LCDC_SCANMOD_SINGLE	(0 << 2)
+#define		ATMEL_LCDC_SCANMOD_DUAL		(1 << 2)
+#define	ATMEL_LCDC_IFWIDTH	(3 << 3)
+#define		ATMEL_LCDC_IFWIDTH_4		(0 << 3)
+#define		ATMEL_LCDC_IFWIDTH_8		(1 << 3)
+#define		ATMEL_LCDC_IFWIDTH_16		(2 << 3)
+#define	ATMEL_LCDC_PIXELSIZE	(7 << 5)
+#define		ATMEL_LCDC_PIXELSIZE_1		(0 << 5)
+#define		ATMEL_LCDC_PIXELSIZE_2		(1 << 5)
+#define		ATMEL_LCDC_PIXELSIZE_4		(2 << 5)
+#define		ATMEL_LCDC_PIXELSIZE_8		(3 << 5)
+#define		ATMEL_LCDC_PIXELSIZE_16		(4 << 5)
+#define		ATMEL_LCDC_PIXELSIZE_24		(5 << 5)
+#define		ATMEL_LCDC_PIXELSIZE_32		(6 << 5)
+#define	ATMEL_LCDC_INVVD	(1 << 8)
+#define		ATMEL_LCDC_INVVD_NORMAL		(0 << 8)
+#define		ATMEL_LCDC_INVVD_INVERTED	(1 << 8)
+#define	ATMEL_LCDC_INVFRAME	(1 << 9 )
+#define		ATMEL_LCDC_INVFRAME_NORMAL	(0 << 9)
+#define		ATMEL_LCDC_INVFRAME_INVERTED	(1 << 9)
+#define	ATMEL_LCDC_INVLINE	(1 << 10)
+#define		ATMEL_LCDC_INVLINE_NORMAL	(0 << 10)
+#define		ATMEL_LCDC_INVLINE_INVERTED	(1 << 10)
+#define	ATMEL_LCDC_INVCLK	(1 << 11)
+#define		ATMEL_LCDC_INVCLK_NORMAL	(0 << 11)
+#define		ATMEL_LCDC_INVCLK_INVERTED	(1 << 11)
+#define	ATMEL_LCDC_INVDVAL	(1 << 12)
+#define		ATMEL_LCDC_INVDVAL_NORMAL	(0 << 12)
+#define		ATMEL_LCDC_INVDVAL_INVERTED	(1 << 12)
+#define	ATMEL_LCDC_CLKMOD	(1 << 15)
+#define		ATMEL_LCDC_CLKMOD_ACTIVEDISPLAY	(0 << 15)
+#define		ATMEL_LCDC_CLKMOD_ALWAYSACTIVE	(1 << 15)
+#define	ATMEL_LCDC_MEMOR	(1 << 31)
+#define		ATMEL_LCDC_MEMOR_BIG		(0 << 31)
+#define		ATMEL_LCDC_MEMOR_LITTLE		(1 << 31)
+
+#define ATMEL_LCDC_TIM1		0x0808
+#define	ATMEL_LCDC_VFP		(0xffU <<  0)
+#define	ATMEL_LCDC_VBP_OFFSET		8
+#define	ATMEL_LCDC_VBP		(0xffU <<  ATMEL_LCDC_VBP_OFFSET)
+#define	ATMEL_LCDC_VPW_OFFSET		16
+#define	ATMEL_LCDC_VPW		(0x3fU << ATMEL_LCDC_VPW_OFFSET)
+#define	ATMEL_LCDC_VHDLY_OFFSET		24
+#define	ATMEL_LCDC_VHDLY	(0xfU  << ATMEL_LCDC_VHDLY_OFFSET)
+
+#define ATMEL_LCDC_TIM2		0x080c
+#define	ATMEL_LCDC_HBP		(0xffU  <<  0)
+#define	ATMEL_LCDC_HPW_OFFSET		8
+#define	ATMEL_LCDC_HPW		(0x3fU  <<  ATMEL_LCDC_HPW_OFFSET)
+#define	ATMEL_LCDC_HFP_OFFSET		21
+#define	ATMEL_LCDC_HFP		(0x7ffU << ATMEL_LCDC_HFP_OFFSET)
+
+#define ATMEL_LCDC_LCDFRMCFG	0x0810
+#define	ATMEL_LCDC_LINEVAL	(0x7ff <<  0)
+#define	ATMEL_LCDC_HOZVAL_OFFSET	21
+#define	ATMEL_LCDC_HOZVAL	(0x7ff << ATMEL_LCDC_HOZVAL_OFFSET)
+
+#define ATMEL_LCDC_FIFO		0x0814
+#define	ATMEL_LCDC_FIFOTH	(0xffff)
+
+#define ATMEL_LCDC_MVAL		0x0818
+
+#define ATMEL_LCDC_DP1_2	0x081c
+#define ATMEL_LCDC_DP4_7	0x0820
+#define ATMEL_LCDC_DP3_5	0x0824
+#define ATMEL_LCDC_DP2_3	0x0828
+#define ATMEL_LCDC_DP5_7	0x082c
+#define ATMEL_LCDC_DP3_4	0x0830
+#define ATMEL_LCDC_DP4_5	0x0834
+#define ATMEL_LCDC_DP6_7	0x0838
+#define	ATMEL_LCDC_DP1_2_VAL	(0xff)
+#define	ATMEL_LCDC_DP4_7_VAL	(0xfffffff)
+#define	ATMEL_LCDC_DP3_5_VAL	(0xfffff)
+#define	ATMEL_LCDC_DP2_3_VAL	(0xfff)
+#define	ATMEL_LCDC_DP5_7_VAL	(0xfffffff)
+#define	ATMEL_LCDC_DP3_4_VAL	(0xffff)
+#define	ATMEL_LCDC_DP4_5_VAL	(0xfffff)
+#define	ATMEL_LCDC_DP6_7_VAL	(0xfffffff)
+
+#define ATMEL_LCDC_PWRCON	0x083c
+#define	ATMEL_LCDC_PWR		(1    <<  0)
+#define	ATMEL_LCDC_GUARDT_OFFSET	1
+#define	ATMEL_LCDC_GUARDT	(0x7f <<  ATMEL_LCDC_GUARDT_OFFSET)
+#define	ATMEL_LCDC_BUSY		(1    << 31)
+
+#define ATMEL_LCDC_CONTRAST_CTR	0x0840
+#define	ATMEL_LCDC_PS		(3 << 0)
+#define		ATMEL_LCDC_PS_DIV1		(0 << 0)
+#define		ATMEL_LCDC_PS_DIV2		(1 << 0)
+#define		ATMEL_LCDC_PS_DIV4		(2 << 0)
+#define		ATMEL_LCDC_PS_DIV8		(3 << 0)
+#define	ATMEL_LCDC_POL		(1 << 2)
+#define		ATMEL_LCDC_POL_NEGATIVE		(0 << 2)
+#define		ATMEL_LCDC_POL_POSITIVE		(1 << 2)
+#define	ATMEL_LCDC_ENA		(1 << 3)
+#define		ATMEL_LCDC_ENA_PWMDISABLE	(0 << 3)
+#define		ATMEL_LCDC_ENA_PWMENABLE	(1 << 3)
+
+#define ATMEL_LCDC_CONTRAST_VAL	0x0844
+#define	ATMEL_LCDC_CVAL	(0xff)
+
+#define ATMEL_LCDC_IER		0x0848
+#define ATMEL_LCDC_IDR		0x084c
+#define ATMEL_LCDC_IMR		0x0850
+#define ATMEL_LCDC_ISR		0x0854
+#define ATMEL_LCDC_ICR		0x0858
+#define	ATMEL_LCDC_LNI		(1 << 0)
+#define	ATMEL_LCDC_LSTLNI	(1 << 1)
+#define	ATMEL_LCDC_EOFI		(1 << 2)
+#define	ATMEL_LCDC_UFLWI	(1 << 4)
+#define	ATMEL_LCDC_OWRI		(1 << 5)
+#define	ATMEL_LCDC_MERI		(1 << 6)
+
+#define ATMEL_LCDC_LUT(n)	(0x0c00 + ((n)*4))
+
+#endif /* __ATMEL_LCDC_H__ */
diff --git a/include/video/aty128.h b/include/video/aty128.h
new file mode 100644
index 00000000..f0851e3b
--- /dev/null
+++ b/include/video/aty128.h
@@ -0,0 +1,422 @@
+/*  $Id: aty128.h,v 1.1 1999/10/12 11:00:40 geert Exp $
+ *  linux/drivers/video/aty128.h
+ *  Register definitions for ATI Rage128 boards
+ *
+ *  Anthony Tong <atong@uiuc.edu>, 1999
+ *  Brad Douglas <brad@neruo.com>, 2000
+ */
+
+#ifndef REG_RAGE128_H
+#define REG_RAGE128_H
+
+#define CLOCK_CNTL_INDEX			0x0008
+#define CLOCK_CNTL_DATA				0x000c
+#define BIOS_0_SCRATCH				0x0010
+#define BUS_CNTL				0x0030
+#define BUS_CNTL1				0x0034
+#define GEN_INT_CNTL				0x0040
+#define CRTC_GEN_CNTL				0x0050
+#define CRTC_EXT_CNTL				0x0054
+#define DAC_CNTL				0x0058
+#define I2C_CNTL_1				0x0094
+#define PALETTE_INDEX				0x00b0
+#define PALETTE_DATA				0x00b4
+#define CNFG_CNTL				0x00e0
+#define GEN_RESET_CNTL				0x00f0
+#define CNFG_MEMSIZE				0x00f8
+#define MEM_CNTL				0x0140
+#define MEM_POWER_MISC				0x015c
+#define AGP_BASE				0x0170
+#define AGP_CNTL				0x0174
+#define AGP_APER_OFFSET				0x0178
+#define PCI_GART_PAGE				0x017c
+#define PC_NGUI_MODE				0x0180
+#define PC_NGUI_CTLSTAT				0x0184
+#define MPP_TB_CONFIG				0x01C0
+#define MPP_GP_CONFIG				0x01C8
+#define VIPH_CONTROL				0x01D0
+#define CRTC_H_TOTAL_DISP			0x0200
+#define CRTC_H_SYNC_STRT_WID			0x0204
+#define CRTC_V_TOTAL_DISP			0x0208
+#define CRTC_V_SYNC_STRT_WID			0x020c
+#define CRTC_VLINE_CRNT_VLINE			0x0210
+#define CRTC_CRNT_FRAME				0x0214
+#define CRTC_GUI_TRIG_VLINE			0x0218
+#define CRTC_OFFSET				0x0224
+#define CRTC_OFFSET_CNTL			0x0228
+#define CRTC_PITCH				0x022c
+#define OVR_CLR					0x0230
+#define OVR_WID_LEFT_RIGHT			0x0234
+#define OVR_WID_TOP_BOTTOM			0x0238
+#define LVDS_GEN_CNTL				0x02d0
+#define DDA_CONFIG				0x02e0
+#define DDA_ON_OFF				0x02e4
+#define VGA_DDA_CONFIG				0x02e8
+#define VGA_DDA_ON_OFF				0x02ec
+#define CRTC2_H_TOTAL_DISP			0x0300
+#define CRTC2_H_SYNC_STRT_WID			0x0304
+#define CRTC2_V_TOTAL_DISP			0x0308
+#define CRTC2_V_SYNC_STRT_WID			0x030c
+#define CRTC2_VLINE_CRNT_VLINE			0x0310
+#define CRTC2_CRNT_FRAME			0x0314
+#define CRTC2_GUI_TRIG_VLINE			0x0318
+#define CRTC2_OFFSET				0x0324
+#define CRTC2_OFFSET_CNTL			0x0328
+#define CRTC2_PITCH				0x032c
+#define DDA2_CONFIG				0x03e0
+#define DDA2_ON_OFF				0x03e4
+#define CRTC2_GEN_CNTL				0x03f8
+#define CRTC2_STATUS				0x03fc
+#define OV0_SCALE_CNTL				0x0420
+#define SUBPIC_CNTL				0x0540
+#define PM4_BUFFER_OFFSET			0x0700
+#define PM4_BUFFER_CNTL				0x0704
+#define PM4_BUFFER_WM_CNTL			0x0708
+#define PM4_BUFFER_DL_RPTR_ADDR			0x070c
+#define PM4_BUFFER_DL_RPTR			0x0710
+#define PM4_BUFFER_DL_WPTR			0x0714
+#define PM4_VC_FPU_SETUP			0x071c
+#define PM4_FPU_CNTL				0x0720
+#define PM4_VC_FORMAT				0x0724
+#define PM4_VC_CNTL				0x0728
+#define PM4_VC_I01				0x072c
+#define PM4_VC_VLOFF				0x0730
+#define PM4_VC_VLSIZE				0x0734
+#define PM4_IW_INDOFF				0x0738
+#define PM4_IW_INDSIZE				0x073c
+#define PM4_FPU_FPX0				0x0740
+#define PM4_FPU_FPY0				0x0744
+#define PM4_FPU_FPX1				0x0748
+#define PM4_FPU_FPY1				0x074c
+#define PM4_FPU_FPX2				0x0750
+#define PM4_FPU_FPY2				0x0754
+#define PM4_FPU_FPY3				0x0758
+#define PM4_FPU_FPY4				0x075c
+#define PM4_FPU_FPY5				0x0760
+#define PM4_FPU_FPY6				0x0764
+#define PM4_FPU_FPR				0x0768
+#define PM4_FPU_FPG				0x076c
+#define PM4_FPU_FPB				0x0770
+#define PM4_FPU_FPA				0x0774
+#define PM4_FPU_INTXY0				0x0780
+#define PM4_FPU_INTXY1				0x0784
+#define PM4_FPU_INTXY2				0x0788
+#define PM4_FPU_INTARGB				0x078c
+#define PM4_FPU_FPTWICEAREA			0x0790
+#define PM4_FPU_DMAJOR01			0x0794
+#define PM4_FPU_DMAJOR12			0x0798
+#define PM4_FPU_DMAJOR02			0x079c
+#define PM4_FPU_STAT				0x07a0
+#define PM4_STAT				0x07b8
+#define PM4_TEST_CNTL				0x07d0
+#define PM4_MICROCODE_ADDR			0x07d4
+#define PM4_MICROCODE_RADDR			0x07d8
+#define PM4_MICROCODE_DATAH			0x07dc
+#define PM4_MICROCODE_DATAL			0x07e0
+#define PM4_CMDFIFO_ADDR			0x07e4
+#define PM4_CMDFIFO_DATAH			0x07e8
+#define PM4_CMDFIFO_DATAL			0x07ec
+#define PM4_BUFFER_ADDR				0x07f0
+#define PM4_BUFFER_DATAH			0x07f4
+#define PM4_BUFFER_DATAL			0x07f8
+#define PM4_MICRO_CNTL				0x07fc
+#define CAP0_TRIG_CNTL				0x0950
+#define CAP1_TRIG_CNTL				0x09c0
+
+/******************************************************************************
+ *                  GUI Block Memory Mapped Registers                         *
+ *                     These registers are FIFOed.                            *
+ *****************************************************************************/
+#define PM4_FIFO_DATA_EVEN			0x1000
+#define PM4_FIFO_DATA_ODD			0x1004
+
+#define DST_OFFSET				0x1404
+#define DST_PITCH				0x1408
+#define DST_WIDTH				0x140c
+#define DST_HEIGHT				0x1410
+#define SRC_X					0x1414
+#define SRC_Y					0x1418
+#define DST_X					0x141c
+#define DST_Y					0x1420
+#define SRC_PITCH_OFFSET			0x1428
+#define DST_PITCH_OFFSET			0x142c
+#define SRC_Y_X					0x1434
+#define DST_Y_X					0x1438
+#define DST_HEIGHT_WIDTH			0x143c
+#define DP_GUI_MASTER_CNTL			0x146c
+#define BRUSH_SCALE				0x1470
+#define BRUSH_Y_X				0x1474
+#define DP_BRUSH_BKGD_CLR			0x1478
+#define DP_BRUSH_FRGD_CLR			0x147c
+#define DST_WIDTH_X				0x1588
+#define DST_HEIGHT_WIDTH_8			0x158c
+#define SRC_X_Y					0x1590
+#define DST_X_Y					0x1594
+#define DST_WIDTH_HEIGHT			0x1598
+#define DST_WIDTH_X_INCY			0x159c
+#define DST_HEIGHT_Y				0x15a0
+#define DST_X_SUB				0x15a4
+#define DST_Y_SUB				0x15a8
+#define SRC_OFFSET				0x15ac
+#define SRC_PITCH				0x15b0
+#define DST_HEIGHT_WIDTH_BW			0x15b4
+#define CLR_CMP_CNTL				0x15c0
+#define CLR_CMP_CLR_SRC				0x15c4
+#define CLR_CMP_CLR_DST				0x15c8
+#define CLR_CMP_MASK				0x15cc
+#define DP_SRC_FRGD_CLR				0x15d8
+#define DP_SRC_BKGD_CLR				0x15dc
+#define DST_BRES_ERR				0x1628
+#define DST_BRES_INC				0x162c
+#define DST_BRES_DEC				0x1630
+#define DST_BRES_LNTH				0x1634
+#define DST_BRES_LNTH_SUB			0x1638
+#define SC_LEFT					0x1640
+#define SC_RIGHT				0x1644
+#define SC_TOP					0x1648
+#define SC_BOTTOM				0x164c
+#define SRC_SC_RIGHT				0x1654
+#define SRC_SC_BOTTOM				0x165c
+#define GUI_DEBUG0				0x16a0
+#define GUI_DEBUG1				0x16a4
+#define GUI_TIMEOUT				0x16b0
+#define GUI_TIMEOUT0				0x16b4
+#define GUI_TIMEOUT1				0x16b8
+#define GUI_PROBE				0x16bc
+#define DP_CNTL					0x16c0
+#define DP_DATATYPE				0x16c4
+#define DP_MIX					0x16c8
+#define DP_WRITE_MASK				0x16cc
+#define DP_CNTL_XDIR_YDIR_YMAJOR		0x16d0
+#define DEFAULT_OFFSET				0x16e0
+#define DEFAULT_PITCH				0x16e4
+#define DEFAULT_SC_BOTTOM_RIGHT			0x16e8
+#define SC_TOP_LEFT				0x16ec
+#define SC_BOTTOM_RIGHT				0x16f0
+#define SRC_SC_BOTTOM_RIGHT			0x16f4
+#define WAIT_UNTIL				0x1720
+#define CACHE_CNTL				0x1724
+#define GUI_STAT				0x1740
+#define PC_GUI_MODE				0x1744
+#define PC_GUI_CTLSTAT				0x1748
+#define PC_DEBUG_MODE				0x1760
+#define BRES_DST_ERR_DEC			0x1780
+#define TRAIL_BRES_T12_ERR_DEC			0x1784
+#define TRAIL_BRES_T12_INC			0x1788
+#define DP_T12_CNTL				0x178c
+#define DST_BRES_T1_LNTH			0x1790
+#define DST_BRES_T2_LNTH			0x1794
+#define SCALE_SRC_HEIGHT_WIDTH			0x1994
+#define SCALE_OFFSET_0				0x1998
+#define SCALE_PITCH				0x199c
+#define SCALE_X_INC				0x19a0
+#define SCALE_Y_INC				0x19a4
+#define SCALE_HACC				0x19a8
+#define SCALE_VACC				0x19ac
+#define SCALE_DST_X_Y				0x19b0
+#define SCALE_DST_HEIGHT_WIDTH			0x19b4
+#define SCALE_3D_CNTL				0x1a00
+#define SCALE_3D_DATATYPE			0x1a20
+#define SETUP_CNTL				0x1bc4
+#define SOLID_COLOR				0x1bc8
+#define WINDOW_XY_OFFSET			0x1bcc
+#define DRAW_LINE_POINT				0x1bd0
+#define SETUP_CNTL_PM4				0x1bd4
+#define DST_PITCH_OFFSET_C			0x1c80
+#define DP_GUI_MASTER_CNTL_C			0x1c84
+#define SC_TOP_LEFT_C				0x1c88
+#define SC_BOTTOM_RIGHT_C			0x1c8c
+
+#define CLR_CMP_MASK_3D				0x1A28
+#define MISC_3D_STATE_CNTL_REG			0x1CA0
+#define MC_SRC1_CNTL				0x19D8
+#define TEX_CNTL				0x1800
+
+/* CONSTANTS */
+#define GUI_ACTIVE				0x80000000
+#define ENGINE_IDLE				0x0
+
+#define PLL_WR_EN				0x00000080
+
+#define CLK_PIN_CNTL				0x0001
+#define PPLL_CNTL				0x0002
+#define PPLL_REF_DIV				0x0003
+#define PPLL_DIV_0				0x0004
+#define PPLL_DIV_1				0x0005
+#define PPLL_DIV_2				0x0006
+#define PPLL_DIV_3				0x0007
+#define VCLK_ECP_CNTL				0x0008
+#define HTOTAL_CNTL				0x0009
+#define X_MPLL_REF_FB_DIV			0x000a
+#define XPLL_CNTL				0x000b
+#define XDLL_CNTL				0x000c
+#define XCLK_CNTL				0x000d
+#define MPLL_CNTL				0x000e
+#define MCLK_CNTL				0x000f
+#define AGP_PLL_CNTL				0x0010
+#define FCP_CNTL				0x0012
+#define PLL_TEST_CNTL				0x0013
+#define P2PLL_CNTL				0x002a
+#define P2PLL_REF_DIV				0x002b
+#define P2PLL_DIV_0				0x002b
+#define POWER_MANAGEMENT			0x002f
+
+#define PPLL_RESET				0x01
+#define PPLL_ATOMIC_UPDATE_EN			0x10000
+#define PPLL_VGA_ATOMIC_UPDATE_EN		0x20000
+#define PPLL_REF_DIV_MASK			0x3FF
+#define PPLL_FB3_DIV_MASK			0x7FF
+#define PPLL_POST3_DIV_MASK			0x70000
+#define PPLL_ATOMIC_UPDATE_R			0x8000
+#define PPLL_ATOMIC_UPDATE_W			0x8000
+#define MEM_CFG_TYPE_MASK			0x3
+#define XCLK_SRC_SEL_MASK			0x7
+#define XPLL_FB_DIV_MASK			0xFF00
+#define X_MPLL_REF_DIV_MASK			0xFF
+
+/* CRTC control values (CRTC_GEN_CNTL) */
+#define CRTC_CSYNC_EN				0x00000010
+
+#define CRTC2_DBL_SCAN_EN			0x00000001
+#define CRTC2_DISPLAY_DIS			0x00800000
+#define CRTC2_FIFO_EXTSENSE			0x00200000
+#define CRTC2_ICON_EN				0x00100000
+#define CRTC2_CUR_EN				0x00010000
+#define CRTC2_EN				0x02000000
+#define CRTC2_DISP_REQ_EN_B			0x04000000
+
+#define CRTC_PIX_WIDTH_MASK			0x00000700
+#define CRTC_PIX_WIDTH_4BPP			0x00000100
+#define CRTC_PIX_WIDTH_8BPP			0x00000200
+#define CRTC_PIX_WIDTH_15BPP			0x00000300
+#define CRTC_PIX_WIDTH_16BPP			0x00000400
+#define CRTC_PIX_WIDTH_24BPP			0x00000500
+#define CRTC_PIX_WIDTH_32BPP			0x00000600
+
+/* DAC_CNTL bit constants */
+#define DAC_8BIT_EN				0x00000100
+#define DAC_MASK				0xFF000000
+#define DAC_BLANKING				0x00000004
+#define DAC_RANGE_CNTL				0x00000003
+#define DAC_CLK_SEL				0x00000010
+#define DAC_PALETTE_ACCESS_CNTL			0x00000020
+#define DAC_PALETTE2_SNOOP_EN			0x00000040
+#define DAC_PDWN				0x00008000
+
+/* CRTC_EXT_CNTL */
+#define CRT_CRTC_ON				0x00008000
+
+/* GEN_RESET_CNTL bit constants */
+#define SOFT_RESET_GUI				0x00000001
+#define SOFT_RESET_VCLK				0x00000100
+#define SOFT_RESET_PCLK				0x00000200
+#define SOFT_RESET_ECP				0x00000400
+#define SOFT_RESET_DISPENG_XCLK			0x00000800
+
+/* PC_GUI_CTLSTAT bit constants */
+#define PC_BUSY_INIT				0x10000000
+#define PC_BUSY_GUI				0x20000000
+#define PC_BUSY_NGUI				0x40000000
+#define PC_BUSY					0x80000000
+
+#define BUS_MASTER_DIS				0x00000040
+#define PM4_BUFFER_CNTL_NONPM4			0x00000000
+
+/* DP_DATATYPE bit constants */
+#define DST_8BPP				0x00000002
+#define DST_15BPP				0x00000003
+#define DST_16BPP				0x00000004
+#define DST_24BPP				0x00000005
+#define DST_32BPP				0x00000006
+
+#define BRUSH_SOLIDCOLOR			0x00000d00
+
+/* DP_GUI_MASTER_CNTL bit constants */
+#define	GMC_SRC_PITCH_OFFSET_DEFAULT		0x00000000
+#define GMC_DST_PITCH_OFFSET_DEFAULT		0x00000000
+#define GMC_SRC_CLIP_DEFAULT			0x00000000
+#define GMC_DST_CLIP_DEFAULT			0x00000000
+#define GMC_BRUSH_SOLIDCOLOR			0x000000d0
+#define GMC_SRC_DSTCOLOR			0x00003000
+#define GMC_BYTE_ORDER_MSB_TO_LSB		0x00000000
+#define GMC_DP_SRC_RECT				0x02000000
+#define GMC_3D_FCN_EN_CLR			0x00000000
+#define GMC_AUX_CLIP_CLEAR			0x20000000
+#define GMC_DST_CLR_CMP_FCN_CLEAR		0x10000000
+#define GMC_WRITE_MASK_SET			0x40000000
+#define GMC_DP_CONVERSION_TEMP_6500		0x00000000
+
+/* DP_GUI_MASTER_CNTL ROP3 named constants */
+#define	ROP3_PATCOPY				0x00f00000
+#define ROP3_SRCCOPY				0x00cc0000
+
+#define SRC_DSTCOLOR				0x00030000
+
+/* DP_CNTL bit constants */
+#define DST_X_RIGHT_TO_LEFT			0x00000000
+#define DST_X_LEFT_TO_RIGHT			0x00000001
+#define DST_Y_BOTTOM_TO_TOP			0x00000000
+#define DST_Y_TOP_TO_BOTTOM			0x00000002
+#define DST_X_MAJOR				0x00000000
+#define DST_Y_MAJOR				0x00000004
+#define DST_X_TILE				0x00000008
+#define DST_Y_TILE				0x00000010
+#define DST_LAST_PEL				0x00000020
+#define DST_TRAIL_X_RIGHT_TO_LEFT		0x00000000
+#define DST_TRAIL_X_LEFT_TO_RIGHT		0x00000040
+#define DST_TRAP_FILL_RIGHT_TO_LEFT		0x00000000
+#define DST_TRAP_FILL_LEFT_TO_RIGHT		0x00000080
+#define DST_BRES_SIGN				0x00000100
+#define DST_HOST_BIG_ENDIAN_EN			0x00000200
+#define DST_POLYLINE_NONLAST			0x00008000
+#define DST_RASTER_STALL			0x00010000
+#define DST_POLY_EDGE				0x00040000
+
+/* DP_MIX bit constants */
+#define DP_SRC_RECT				0x00000200
+#define DP_SRC_HOST				0x00000300
+#define DP_SRC_HOST_BYTEALIGN			0x00000400
+
+/* LVDS_GEN_CNTL constants */
+#define LVDS_BL_MOD_LEVEL_MASK			0x0000ff00
+#define LVDS_BL_MOD_LEVEL_SHIFT			8
+#define LVDS_BL_MOD_EN				0x00010000
+#define LVDS_DIGION				0x00040000
+#define LVDS_BLON				0x00080000
+#define LVDS_ON					0x00000001
+#define LVDS_DISPLAY_DIS			0x00000002
+#define LVDS_PANEL_TYPE_2PIX_PER_CLK		0x00000004
+#define LVDS_PANEL_24BITS_TFT			0x00000008
+#define LVDS_FRAME_MOD_NO			0x00000000
+#define LVDS_FRAME_MOD_2_LEVELS			0x00000010
+#define LVDS_FRAME_MOD_4_LEVELS			0x00000020
+#define LVDS_RST_FM				0x00000040
+#define LVDS_EN					0x00000080
+
+/* CRTC2_GEN_CNTL constants */
+#define CRTC2_EN				0x02000000
+
+/* POWER_MANAGEMENT constants */
+#define PWR_MGT_ON				0x00000001
+#define PWR_MGT_MODE_MASK			0x00000006
+#define PWR_MGT_MODE_PIN			0x00000000
+#define PWR_MGT_MODE_REGISTER			0x00000002
+#define PWR_MGT_MODE_TIMER			0x00000004
+#define PWR_MGT_MODE_PCI			0x00000006
+#define PWR_MGT_AUTO_PWR_UP_EN			0x00000008
+#define PWR_MGT_ACTIVITY_PIN_ON			0x00000010
+#define PWR_MGT_STANDBY_POL			0x00000020
+#define PWR_MGT_SUSPEND_POL			0x00000040
+#define PWR_MGT_SELF_REFRESH			0x00000080
+#define PWR_MGT_ACTIVITY_PIN_EN			0x00000100
+#define PWR_MGT_KEYBD_SNOOP			0x00000200
+#define PWR_MGT_TRISTATE_MEM_EN			0x00000800
+#define PWR_MGT_SELW4MS				0x00001000
+#define PWR_MGT_SLOWDOWN_MCLK			0x00002000
+
+#define PMI_PMSCR_REG				0x60
+
+/* used by ATI bug fix for hardware ROM */
+#define RAGE128_MPP_TB_CONFIG                   0x01c0
+
+#endif				/* REG_RAGE128_H */
diff --git a/include/video/broadsheetfb.h b/include/video/broadsheetfb.h
new file mode 100644
index 00000000..548d28f4
--- /dev/null
+++ b/include/video/broadsheetfb.h
@@ -0,0 +1,74 @@
+/*
+ * broadsheetfb.h - definitions for the broadsheet framebuffer driver
+ *
+ * Copyright (C) 2008 by Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ */
+
+#ifndef _LINUX_BROADSHEETFB_H_
+#define _LINUX_BROADSHEETFB_H_
+
+/* Broadsheet command defines */
+#define BS_CMD_INIT_SYS_RUN	0x06
+#define BS_CMD_INIT_DSPE_CFG	0x09
+#define BS_CMD_INIT_DSPE_TMG	0x0A
+#define BS_CMD_INIT_ROTMODE	0x0B
+#define BS_CMD_RD_REG		0x10
+#define BS_CMD_WR_REG		0x11
+#define BS_CMD_LD_IMG		0x20
+#define BS_CMD_LD_IMG_AREA	0x22
+#define BS_CMD_LD_IMG_END	0x23
+#define BS_CMD_WAIT_DSPE_TRG	0x28
+#define BS_CMD_WAIT_DSPE_FREND	0x29
+#define BS_CMD_RD_WFM_INFO	0x30
+#define BS_CMD_UPD_INIT		0x32
+#define BS_CMD_UPD_FULL		0x33
+#define BS_CMD_UPD_GDRV_CLR	0x37
+
+/* Broadsheet register interface defines */
+#define BS_REG_REV		0x00
+#define BS_REG_PRC		0x02
+
+/* Broadsheet pin interface specific defines */
+#define BS_CS	0x01
+#define BS_DC 	0x02
+#define BS_WR 	0x03
+
+/* Broadsheet IO interface specific defines */
+#define BS_MMIO_CMD	0x01
+#define BS_MMIO_DATA	0x02
+
+/* struct used by broadsheet. board specific stuff comes from *board */
+struct broadsheetfb_par {
+	struct fb_info *info;
+	struct broadsheet_board *board;
+	void (*write_reg)(struct broadsheetfb_par *, u16 reg, u16 val);
+	u16 (*read_reg)(struct broadsheetfb_par *, u16 reg);
+	wait_queue_head_t waitq;
+	int panel_index;
+	struct mutex io_lock;
+};
+
+/* board specific routines */
+struct broadsheet_board {
+	struct module *owner;
+	int (*init)(struct broadsheetfb_par *);
+	int (*wait_for_rdy)(struct broadsheetfb_par *);
+	void (*cleanup)(struct broadsheetfb_par *);
+	int (*get_panel_type)(void);
+	int (*setup_irq)(struct fb_info *);
+
+	/* Functions for boards that use GPIO */
+	void (*set_ctl)(struct broadsheetfb_par *, unsigned char, u8);
+	void (*set_hdb)(struct broadsheetfb_par *, u16);
+	u16 (*get_hdb)(struct broadsheetfb_par *);
+
+	/* Functions for boards that have specialized MMIO */
+	void (*mmio_write)(struct broadsheetfb_par *, int type, u16);
+	u16 (*mmio_read)(struct broadsheetfb_par *);
+};
+#endif
diff --git a/include/video/cirrus.h b/include/video/cirrus.h
new file mode 100644
index 00000000..9a5e9ee3
--- /dev/null
+++ b/include/video/cirrus.h
@@ -0,0 +1,122 @@
+/*
+ * drivers/video/clgenfb.h - Cirrus Logic chipset constants
+ *
+ * Copyright 1999 Jeff Garzik <jgarzik@pobox.com>
+ *
+ * Original clgenfb author:  Frank Neumann
+ *
+ * Based on retz3fb.c and clgen.c:
+ *      Copyright (C) 1997 Jes Sorensen
+ *      Copyright (C) 1996 Frank Neumann
+ *
+ ***************************************************************
+ *
+ * Format this code with GNU indent '-kr -i8 -pcs' options.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#ifndef __CLGENFB_H__
+#define __CLGENFB_H__
+
+/* OLD COMMENT: definitions for Piccolo/SD64 VGA controller chip   */
+/* OLD COMMENT: these definitions might most of the time also work */
+/* OLD COMMENT: for other CL-GD542x/543x based boards..            */
+
+/*** External/General Registers ***/
+#define CL_POS102	0x102  	/* POS102 register */
+#define CL_VSSM		0x46e8 	/* Adapter Sleep */
+#define CL_VSSM2	0x3c3	/* Motherboard Sleep */
+
+/*** VGA Sequencer Registers ***/
+/* the following are from the "extension registers" group */
+#define CL_SEQR6	0x6	/* Unlock ALL Extensions */
+#define CL_SEQR7	0x7	/* Extended Sequencer Mode */
+#define CL_SEQR8	0x8	/* EEPROM Control */
+#define CL_SEQR9	0x9	/* Scratch Pad 0 (do not access!) */
+#define CL_SEQRA	0xa	/* Scratch Pad 1 (do not access!) */
+#define CL_SEQRB	0xb	/* VCLK0 Numerator */
+#define CL_SEQRC	0xc	/* VCLK1 Numerator */
+#define CL_SEQRD	0xd	/* VCLK2 Numerator */
+#define CL_SEQRE	0xe	/* VCLK3 Numerator */
+#define CL_SEQRF	0xf	/* DRAM Control */
+#define CL_SEQR10	0x10	/* Graphics Cursor X Position */
+#define CL_SEQR11	0x11	/* Graphics Cursor Y Position */
+#define CL_SEQR12	0x12	/* Graphics Cursor Attributes */
+#define CL_SEQR13	0x13	/* Graphics Cursor Pattern Address Offset */
+#define CL_SEQR14	0x14	/* Scratch Pad 2 (CL-GD5426/'28 Only) (do not access!) */
+#define CL_SEQR15	0x15	/* Scratch Pad 3 (CL-GD5426/'28 Only) (do not access!) */
+#define CL_SEQR16	0x16	/* Performance Tuning (CL-GD5424/'26/'28 Only) */
+#define CL_SEQR17	0x17	/* Configuration ReadBack and Extended Control (CL-GF5428 Only) */
+#define CL_SEQR18	0x18	/* Signature Generator Control (Not CL-GD5420) */
+#define CL_SEQR19	0x19	/* Signature Generator Result Low Byte (Not CL-GD5420) */
+#define CL_SEQR1A	0x1a	/* Signature Generator Result High Byte (Not CL-GD5420) */
+#define CL_SEQR1B	0x1b	/* VCLK0 Denominator and Post-Scalar Value */
+#define CL_SEQR1C	0x1c	/* VCLK1 Denominator and Post-Scalar Value */
+#define CL_SEQR1D	0x1d	/* VCLK2 Denominator and Post-Scalar Value */
+#define CL_SEQR1E	0x1e	/* VCLK3 Denominator and Post-Scalar Value */
+#define CL_SEQR1F	0x1f	/* BIOS ROM write enable and MCLK Select */
+
+/*** CRT Controller Registers ***/
+#define CL_CRT22	0x22	/* Graphics Data Latches ReadBack */
+#define CL_CRT24	0x24	/* Attribute Controller Toggle ReadBack */
+#define CL_CRT26	0x26	/* Attribute Controller Index ReadBack */
+/* the following are from the "extension registers" group */
+#define CL_CRT19	0x19	/* Interlace End */
+#define CL_CRT1A	0x1a	/* Interlace Control */
+#define CL_CRT1B	0x1b	/* Extended Display Controls */
+#define CL_CRT1C	0x1c	/* Sync adjust and genlock register */
+#define CL_CRT1D	0x1d	/* Overlay Extended Control register */
+#define CL_CRT1E	0x1e	/* Another overflow register */
+#define CL_CRT25	0x25	/* Part Status Register */
+#define CL_CRT27	0x27	/* ID Register */
+#define CL_CRT51	0x51	/* P4 disable "flicker fixer" */
+
+/*** Graphics Controller Registers ***/
+/* the following are from the "extension registers" group */
+#define CL_GR9		0x9	/* Offset Register 0 */
+#define CL_GRA		0xa	/* Offset Register 1 */
+#define CL_GRB		0xb	/* Graphics Controller Mode Extensions */
+#define CL_GRC		0xc	/* Color Key (CL-GD5424/'26/'28 Only) */
+#define CL_GRD		0xd	/* Color Key Mask (CL-GD5424/'26/'28 Only) */
+#define CL_GRE		0xe	/* Miscellaneous Control (Cl-GD5428 Only) */
+#define CL_GRF		0xf	/* Display Compression Control register */
+#define CL_GR10		0x10	/* 16-bit Pixel BG Color High Byte (Not CL-GD5420) */
+#define CL_GR11		0x11	/* 16-bit Pixel FG Color High Byte (Not CL-GD5420) */
+#define CL_GR12		0x12	/* Background Color Byte 2 Register */
+#define CL_GR13		0x13	/* Foreground Color Byte 2 Register */
+#define CL_GR14		0x14	/* Background Color Byte 3 Register */
+#define CL_GR15		0x15	/* Foreground Color Byte 3 Register */
+/* the following are CL-GD5426/'28 specific blitter registers */
+#define CL_GR20		0x20	/* BLT Width Low */
+#define CL_GR21		0x21	/* BLT Width High */
+#define CL_GR22		0x22	/* BLT Height Low */
+#define CL_GR23		0x23	/* BLT Height High */
+#define CL_GR24		0x24	/* BLT Destination Pitch Low */
+#define CL_GR25		0x25	/* BLT Destination Pitch High */
+#define CL_GR26		0x26	/* BLT Source Pitch Low */
+#define CL_GR27		0x27	/* BLT Source Pitch High */
+#define CL_GR28		0x28	/* BLT Destination Start Low */
+#define CL_GR29		0x29	/* BLT Destination Start Mid */
+#define CL_GR2A		0x2a	/* BLT Destination Start High */
+#define CL_GR2C		0x2c	/* BLT Source Start Low */
+#define CL_GR2D		0x2d	/* BLT Source Start Mid */
+#define CL_GR2E		0x2e	/* BLT Source Start High */
+#define CL_GR2F		0x2f	/* Picasso IV Blitter compat mode..? */
+#define CL_GR30		0x30	/* BLT Mode */
+#define CL_GR31		0x31	/* BLT Start/Status */
+#define CL_GR32		0x32	/* BLT Raster Operation */
+#define CL_GR33		0x33	/* another P4 "compat" register.. */
+#define CL_GR34		0x34	/* Transparent Color Select Low */
+#define CL_GR35		0x35	/* Transparent Color Select High */
+#define CL_GR38		0x38	/* Source Transparent Color Mask Low */
+#define CL_GR39		0x39	/* Source Transparent Color Mask High */
+
+/*** Attribute Controller Registers ***/
+#define CL_AR33		0x33	/* The "real" Pixel Panning register (?) */
+#define CL_AR34		0x34	/* TEST */
+
+#endif /* __CLGENFB_H__ */
diff --git a/include/video/cvisionppc.h b/include/video/cvisionppc.h
new file mode 100644
index 00000000..11250eee
--- /dev/null
+++ b/include/video/cvisionppc.h
@@ -0,0 +1,51 @@
+/*
+ * Phase5 CybervisionPPC (TVP4020) definitions for the Permedia2 framebuffer
+ * driver.
+ *
+ * Copyright (c) 1998-1999 Ilario Nardinocchi (nardinoc@CS.UniBO.IT)
+ * --------------------------------------------------------------------------
+ * $Id: cvisionppc.h,v 1.8 1999/01/28 13:18:07 illo Exp $
+ * --------------------------------------------------------------------------
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef CVISIONPPC_H
+#define CVISIONPPC_H
+
+#ifndef PM2FB_H
+#include "pm2fb.h"
+#endif
+
+struct cvppc_par {
+	unsigned char* pci_config;
+	unsigned char* pci_bridge;
+	u32 user_flags;
+};
+
+#define CSPPC_PCI_BRIDGE		0xfffe0000
+#define CSPPC_BRIDGE_ENDIAN		0x0000
+#define CSPPC_BRIDGE_INT		0x0010
+
+#define	CVPPC_PCI_CONFIG		0xfffc0000
+#define CVPPC_ROM_ADDRESS		0xe2000001
+#define CVPPC_REGS_REGION		0xef000000
+#define CVPPC_FB_APERTURE_ONE		0xe0000000
+#define CVPPC_FB_APERTURE_TWO		0xe1000000
+#define CVPPC_FB_SIZE			0x00800000
+#define CVPPC_MEM_CONFIG_OLD		0xed61fcaa	/* FIXME Fujitsu?? */
+#define CVPPC_MEM_CONFIG_NEW		0xed41c532	/* FIXME USA?? */
+#define CVPPC_MEMCLOCK			83000		/* in KHz */
+
+/* CVPPC_BRIDGE_ENDIAN */
+#define CSPPCF_BRIDGE_BIG_ENDIAN	0x02
+
+/* CVPPC_BRIDGE_INT */
+#define CSPPCF_BRIDGE_ACTIVE_INT2	0x01
+
+#endif	/* CVISIONPPC_H */
+
+/*****************************************************************************
+ * That's all folks!
+ *****************************************************************************/
diff --git a/include/video/da8xx-fb.h b/include/video/da8xx-fb.h
new file mode 100644
index 00000000..89d43b3d
--- /dev/null
+++ b/include/video/da8xx-fb.h
@@ -0,0 +1,104 @@
+/*
+ * Header file for TI DA8XX LCD controller platform data.
+ *
+ * Copyright (C) 2008-2009 MontaVista Software Inc.
+ * Copyright (C) 2008-2009 Texas Instruments Inc
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef DA8XX_FB_H
+#define DA8XX_FB_H
+
+enum panel_type {
+	QVGA = 0
+};
+
+enum panel_shade {
+	MONOCHROME = 0,
+	COLOR_ACTIVE,
+	COLOR_PASSIVE,
+};
+
+enum raster_load_mode {
+	LOAD_DATA = 1,
+	LOAD_PALETTE,
+};
+
+struct display_panel {
+	enum panel_type panel_type; /* QVGA */
+	int max_bpp;
+	int min_bpp;
+	enum panel_shade panel_shade;
+};
+
+struct da8xx_lcdc_platform_data {
+	const char manu_name[10];
+	void *controller_data;
+	const char type[25];
+	void (*panel_power_ctrl)(int);
+};
+
+struct lcd_ctrl_config {
+	const struct display_panel *p_disp_panel;
+
+	/* AC Bias Pin Frequency */
+	int ac_bias;
+
+	/* AC Bias Pin Transitions per Interrupt */
+	int ac_bias_intrpt;
+
+	/* DMA burst size */
+	int dma_burst_sz;
+
+	/* Bits per pixel */
+	int bpp;
+
+	/* FIFO DMA Request Delay */
+	int fdd;
+
+	/* TFT Alternative Signal Mapping (Only for active) */
+	unsigned char tft_alt_mode;
+
+	/* 12 Bit Per Pixel (5-6-5) Mode (Only for passive) */
+	unsigned char stn_565_mode;
+
+	/* Mono 8-bit Mode: 1=D0-D7 or 0=D0-D3 */
+	unsigned char mono_8bit_mode;
+
+	/* Invert line clock */
+	unsigned char invert_line_clock;
+
+	/* Invert frame clock  */
+	unsigned char invert_frm_clock;
+
+	/* Horizontal and Vertical Sync Edge: 0=rising 1=falling */
+	unsigned char sync_edge;
+
+	/* Horizontal and Vertical Sync: Control: 0=ignore */
+	unsigned char sync_ctrl;
+
+	/* Raster Data Order Select: 1=Most-to-least 0=Least-to-most */
+	unsigned char raster_order;
+};
+
+struct lcd_sync_arg {
+	int back_porch;
+	int front_porch;
+	int pulse_width;
+};
+
+/* ioctls */
+#define FBIOGET_CONTRAST	_IOR('F', 1, int)
+#define FBIOPUT_CONTRAST	_IOW('F', 2, int)
+#define FBIGET_BRIGHTNESS	_IOR('F', 3, int)
+#define FBIPUT_BRIGHTNESS	_IOW('F', 3, int)
+#define FBIGET_COLOR		_IOR('F', 5, int)
+#define FBIPUT_COLOR		_IOW('F', 6, int)
+#define FBIPUT_HSYNC		_IOW('F', 9, int)
+#define FBIPUT_VSYNC		_IOW('F', 10, int)
+
+#endif  /* ifndef DA8XX_FB_H */
+
diff --git a/include/video/edid.h b/include/video/edid.h
new file mode 100644
index 00000000..c5f19870
--- /dev/null
+++ b/include/video/edid.h
@@ -0,0 +1,14 @@
+#ifndef __linux_video_edid_h__
+#define __linux_video_edid_h__
+
+struct edid_info {
+	unsigned char dummy[128];
+};
+
+#ifdef __KERNEL__
+#ifdef CONFIG_X86
+extern struct edid_info edid_info;
+#endif
+#endif
+
+#endif /* __linux_video_edid_h__ */
diff --git a/include/video/epson1355.h b/include/video/epson1355.h
new file mode 100644
index 00000000..9759f299
--- /dev/null
+++ b/include/video/epson1355.h
@@ -0,0 +1,64 @@
+/*
+ * include/video/epson13xx.h -- Epson 13xx frame buffer
+ *
+ * Copyright (C) Hewlett-Packard Company.  All rights reserved.
+ *
+ * Written by Christopher Hoover <ch@hpl.hp.com>
+ *
+ */
+
+#ifndef _EPSON13XX_H_
+#define _EPSON13XX_H_
+
+#define REG_REVISION_CODE              0x00
+#define REG_MEMORY_CONFIG              0x01
+#define REG_PANEL_TYPE                 0x02
+#define REG_MOD_RATE                   0x03
+#define REG_HORZ_DISP_WIDTH            0x04
+#define REG_HORZ_NONDISP_PERIOD        0x05
+#define REG_HRTC_START_POSITION        0x06
+#define REG_HRTC_PULSE_WIDTH           0x07
+#define REG_VERT_DISP_HEIGHT0          0x08
+#define REG_VERT_DISP_HEIGHT1          0x09
+#define REG_VERT_NONDISP_PERIOD        0x0A
+#define REG_VRTC_START_POSITION        0x0B
+#define REG_VRTC_PULSE_WIDTH           0x0C
+#define REG_DISPLAY_MODE               0x0D
+#define REG_SCRN1_LINE_COMPARE0        0x0E
+#define REG_SCRN1_LINE_COMPARE1        0x0F
+#define REG_SCRN1_DISP_START_ADDR0     0x10
+#define REG_SCRN1_DISP_START_ADDR1     0x11
+#define REG_SCRN1_DISP_START_ADDR2     0x12
+#define REG_SCRN2_DISP_START_ADDR0     0x13
+#define REG_SCRN2_DISP_START_ADDR1     0x14
+#define REG_SCRN2_DISP_START_ADDR2     0x15
+#define REG_MEM_ADDR_OFFSET0           0x16
+#define REG_MEM_ADDR_OFFSET1           0x17
+#define REG_PIXEL_PANNING              0x18
+#define REG_CLOCK_CONFIG               0x19
+#define REG_POWER_SAVE_CONFIG          0x1A
+#define REG_MISC                       0x1B
+#define REG_MD_CONFIG_READBACK0        0x1C
+#define REG_MD_CONFIG_READBACK1        0x1D
+#define REG_GPIO_CONFIG0               0x1E
+#define REG_GPIO_CONFIG1               0x1F
+#define REG_GPIO_CONTROL0              0x20
+#define REG_GPIO_CONTROL1              0x21
+#define REG_PERF_ENHANCEMENT0          0x22
+#define REG_PERF_ENHANCEMENT1          0x23
+#define REG_LUT_ADDR                   0x24
+#define REG_RESERVED_1                 0x25
+#define REG_LUT_DATA                   0x26
+#define REG_INK_CURSOR_CONTROL         0x27
+#define REG_CURSOR_X_POSITION0         0x28
+#define REG_CURSOR_X_POSITION1         0x29
+#define REG_CURSOR_Y_POSITION0         0x2A
+#define REG_CURSOR_Y_POSITION1         0x2B
+#define REG_INK_CURSOR_COLOR0_0        0x2C
+#define REG_INK_CURSOR_COLOR0_1        0x2D
+#define REG_INK_CURSOR_COLOR1_0        0x2E
+#define REG_INK_CURSOR_COLOR1_1        0x2F
+#define REG_INK_CURSOR_START_ADDR      0x30
+#define REG_ALTERNATE_FRM              0x31
+
+#endif
diff --git a/include/video/exynos_dp.h b/include/video/exynos_dp.h
new file mode 100644
index 00000000..8847a9d6
--- /dev/null
+++ b/include/video/exynos_dp.h
@@ -0,0 +1,131 @@
+/*
+ * Samsung SoC DP device support
+ *
+ * Copyright (C) 2012 Samsung Electronics Co., Ltd.
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _EXYNOS_DP_H
+#define _EXYNOS_DP_H
+
+#define DP_TIMEOUT_LOOP_COUNT 100
+#define MAX_CR_LOOP 5
+#define MAX_EQ_LOOP 4
+
+enum link_rate_type {
+	LINK_RATE_1_62GBPS = 0x06,
+	LINK_RATE_2_70GBPS = 0x0a
+};
+
+enum link_lane_count_type {
+	LANE_COUNT1 = 1,
+	LANE_COUNT2 = 2,
+	LANE_COUNT4 = 4
+};
+
+enum link_training_state {
+	START,
+	CLOCK_RECOVERY,
+	EQUALIZER_TRAINING,
+	FINISHED,
+	FAILED
+};
+
+enum voltage_swing_level {
+	VOLTAGE_LEVEL_0,
+	VOLTAGE_LEVEL_1,
+	VOLTAGE_LEVEL_2,
+	VOLTAGE_LEVEL_3,
+};
+
+enum pre_emphasis_level {
+	PRE_EMPHASIS_LEVEL_0,
+	PRE_EMPHASIS_LEVEL_1,
+	PRE_EMPHASIS_LEVEL_2,
+	PRE_EMPHASIS_LEVEL_3,
+};
+
+enum pattern_set {
+	PRBS7,
+	D10_2,
+	TRAINING_PTN1,
+	TRAINING_PTN2,
+	DP_NONE
+};
+
+enum color_space {
+	COLOR_RGB,
+	COLOR_YCBCR422,
+	COLOR_YCBCR444
+};
+
+enum color_depth {
+	COLOR_6,
+	COLOR_8,
+	COLOR_10,
+	COLOR_12
+};
+
+enum color_coefficient {
+	COLOR_YCBCR601,
+	COLOR_YCBCR709
+};
+
+enum dynamic_range {
+	VESA,
+	CEA
+};
+
+enum pll_status {
+	PLL_UNLOCKED,
+	PLL_LOCKED
+};
+
+enum clock_recovery_m_value_type {
+	CALCULATED_M,
+	REGISTER_M
+};
+
+enum video_timing_recognition_type {
+	VIDEO_TIMING_FROM_CAPTURE,
+	VIDEO_TIMING_FROM_REGISTER
+};
+
+enum analog_power_block {
+	AUX_BLOCK,
+	CH0_BLOCK,
+	CH1_BLOCK,
+	CH2_BLOCK,
+	CH3_BLOCK,
+	ANALOG_TOTAL,
+	POWER_ALL
+};
+
+struct video_info {
+	char *name;
+
+	bool h_sync_polarity;
+	bool v_sync_polarity;
+	bool interlaced;
+
+	enum color_space color_space;
+	enum dynamic_range dynamic_range;
+	enum color_coefficient ycbcr_coeff;
+	enum color_depth color_depth;
+
+	enum link_rate_type link_rate;
+	enum link_lane_count_type lane_count;
+};
+
+struct exynos_dp_platdata {
+	struct video_info *video_info;
+
+	void (*phy_init)(void);
+	void (*phy_exit)(void);
+};
+
+#endif /* _EXYNOS_DP_H */
diff --git a/include/video/exynos_mipi_dsim.h b/include/video/exynos_mipi_dsim.h
new file mode 100644
index 00000000..772c7705
--- /dev/null
+++ b/include/video/exynos_mipi_dsim.h
@@ -0,0 +1,359 @@
+/* include/video/exynos_mipi_dsim.h
+ *
+ * Platform data header for Samsung SoC MIPI-DSIM.
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd
+ *
+ * InKi Dae <inki.dae@samsung.com>
+ * Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _EXYNOS_MIPI_DSIM_H
+#define _EXYNOS_MIPI_DSIM_H
+
+#include <linux/device.h>
+#include <linux/fb.h>
+
+#define PANEL_NAME_SIZE		(32)
+
+/*
+ * Enumerate display interface type.
+ *
+ * DSIM_COMMAND means cpu interface and rgb interface for DSIM_VIDEO.
+ *
+ * P.S. MIPI DSI Master has two display controller intefaces, RGB Interface
+ *	for main display and CPU Interface(same as I80 Interface) for main
+ *	and sub display.
+ */
+enum mipi_dsim_interface_type {
+	DSIM_COMMAND,
+	DSIM_VIDEO
+};
+
+enum mipi_dsim_virtual_ch_no {
+	DSIM_VIRTUAL_CH_0,
+	DSIM_VIRTUAL_CH_1,
+	DSIM_VIRTUAL_CH_2,
+	DSIM_VIRTUAL_CH_3
+};
+
+enum mipi_dsim_burst_mode_type {
+	DSIM_NON_BURST_SYNC_EVENT,
+	DSIM_BURST_SYNC_EVENT,
+	DSIM_NON_BURST_SYNC_PULSE,
+	DSIM_BURST,
+	DSIM_NON_VIDEO_MODE
+};
+
+enum mipi_dsim_no_of_data_lane {
+	DSIM_DATA_LANE_1,
+	DSIM_DATA_LANE_2,
+	DSIM_DATA_LANE_3,
+	DSIM_DATA_LANE_4
+};
+
+enum mipi_dsim_byte_clk_src {
+	DSIM_PLL_OUT_DIV8,
+	DSIM_EXT_CLK_DIV8,
+	DSIM_EXT_CLK_BYPASS
+};
+
+enum mipi_dsim_pixel_format {
+	DSIM_CMD_3BPP,
+	DSIM_CMD_8BPP,
+	DSIM_CMD_12BPP,
+	DSIM_CMD_16BPP,
+	DSIM_VID_16BPP_565,
+	DSIM_VID_18BPP_666PACKED,
+	DSIM_18BPP_666LOOSELYPACKED,
+	DSIM_24BPP_888
+};
+
+/*
+ * struct mipi_dsim_config - interface for configuring mipi-dsi controller.
+ *
+ * @auto_flush: enable or disable Auto flush of MD FIFO using VSYNC pulse.
+ * @eot_disable: enable or disable EoT packet in HS mode.
+ * @auto_vertical_cnt: specifies auto vertical count mode.
+ *	in Video mode, the vertical line transition uses line counter
+ *	configured by VSA, VBP, and Vertical resolution.
+ *	If this bit is set to '1', the line counter does not use VSA and VBP
+ *	registers.(in command mode, this variable is ignored)
+ * @hse: set horizontal sync event mode.
+ *	In VSYNC pulse and Vporch area, MIPI DSI master transfers only HSYNC
+ *	start packet to MIPI DSI slave at MIPI DSI spec1.1r02.
+ *	this bit transfers HSYNC end packet in VSYNC pulse and Vporch area
+ *	(in mommand mode, this variable is ignored)
+ * @hfp: specifies HFP disable mode.
+ *	if this variable is set, DSI master ignores HFP area in VIDEO mode.
+ *	(in command mode, this variable is ignored)
+ * @hbp: specifies HBP disable mode.
+ *	if this variable is set, DSI master ignores HBP area in VIDEO mode.
+ *	(in command mode, this variable is ignored)
+ * @hsa: specifies HSA disable mode.
+ *	if this variable is set, DSI master ignores HSA area in VIDEO mode.
+ *	(in command mode, this variable is ignored)
+ * @cma_allow: specifies the number of horizontal lines, where command packet
+ *	transmission is allowed after Stable VFP period.
+ * @e_interface: specifies interface to be used.(CPU or RGB interface)
+ * @e_virtual_ch: specifies virtual channel number that main or
+ *	sub diaplsy uses.
+ * @e_pixel_format: specifies pixel stream format for main or sub display.
+ * @e_burst_mode: selects Burst mode in Video mode.
+ *	in Non-burst mode, RGB data area is filled with RGB data and NULL
+ *	packets, according to input bandwidth of RGB interface.
+ *	In Burst mode, RGB data area is filled with RGB data only.
+ * @e_no_data_lane: specifies data lane count to be used by Master.
+ * @e_byte_clk: select byte clock source. (it must be DSIM_PLL_OUT_DIV8)
+ *	DSIM_EXT_CLK_DIV8 and DSIM_EXT_CLK_BYPASSS are not supported.
+ * @pll_stable_time: specifies the PLL Timer for stability of the ganerated
+ *	clock(System clock cycle base)
+ *	if the timer value goes to 0x00000000, the clock stable bit of status
+ *	and interrupt register is set.
+ * @esc_clk: specifies escape clock frequency for getting the escape clock
+ *	prescaler value.
+ * @stop_holding_cnt: specifies the interval value between transmitting
+ *	read packet(or write "set_tear_on" command) and BTA request.
+ *	after transmitting read packet or write "set_tear_on" command,
+ *	BTA requests to D-PHY automatically. this counter value specifies
+ *	the interval between them.
+ * @bta_timeout: specifies the timer for BTA.
+ *	this register specifies time out from BTA request to change
+ *	the direction with respect to Tx escape clock.
+ * @rx_timeout: specifies the timer for LP Rx mode timeout.
+ *	this register specifies time out on how long RxValid deasserts,
+ *	after RxLpdt asserts with respect to Tx escape clock.
+ *	- RxValid specifies Rx data valid indicator.
+ *	- RxLpdt specifies an indicator that D-PHY is under RxLpdt mode.
+ *	- RxValid and RxLpdt specifies signal from D-PHY.
+ */
+struct mipi_dsim_config {
+	unsigned char			auto_flush;
+	unsigned char			eot_disable;
+
+	unsigned char			auto_vertical_cnt;
+	unsigned char			hse;
+	unsigned char			hfp;
+	unsigned char			hbp;
+	unsigned char			hsa;
+	unsigned char			cmd_allow;
+
+	enum mipi_dsim_interface_type	e_interface;
+	enum mipi_dsim_virtual_ch_no	e_virtual_ch;
+	enum mipi_dsim_pixel_format	e_pixel_format;
+	enum mipi_dsim_burst_mode_type	e_burst_mode;
+	enum mipi_dsim_no_of_data_lane	e_no_data_lane;
+	enum mipi_dsim_byte_clk_src	e_byte_clk;
+
+	/*
+	 * ===========================================
+	 * |    P    |    M    |    S    |    MHz    |
+	 * -------------------------------------------
+	 * |    3    |   100   |    3    |    100    |
+	 * |    3    |   100   |    2    |    200    |
+	 * |    3    |    63   |    1    |    252    |
+	 * |    4    |   100   |    1    |    300    |
+	 * |    4    |   110   |    1    |    330    |
+	 * |   12    |   350   |    1    |    350    |
+	 * |    3    |   100   |    1    |    400    |
+	 * |    4    |   150   |    1    |    450    |
+	 * |    6    |   118   |    1    |    472    |
+	 * |	3    |   120   |    1    |    480    |
+	 * |   12    |   250   |    0    |    500    |
+	 * |    4    |   100   |    0    |    600    |
+	 * |    3    |    81   |    0    |    648    |
+	 * |    3    |    88   |    0    |    704    |
+	 * |    3    |    90   |    0    |    720    |
+	 * |    3    |   100   |    0    |    800    |
+	 * |   12    |   425   |    0    |    850    |
+	 * |    4    |   150   |    0    |    900    |
+	 * |   12    |   475   |    0    |    950    |
+	 * |    6    |   250   |    0    |   1000    |
+	 * -------------------------------------------
+	 */
+
+	/*
+	 * pms could be calculated as the following.
+	 * M * 24 / P * 2 ^ S = MHz
+	 */
+	unsigned char			p;
+	unsigned short			m;
+	unsigned char			s;
+
+	unsigned int			pll_stable_time;
+	unsigned long			esc_clk;
+
+	unsigned short			stop_holding_cnt;
+	unsigned char			bta_timeout;
+	unsigned short			rx_timeout;
+};
+
+/*
+ * struct mipi_dsim_device - global interface for mipi-dsi driver.
+ *
+ * @dev: driver model representation of the device.
+ * @id: unique device id.
+ * @clock: pointer to MIPI-DSI clock of clock framework.
+ * @irq: interrupt number to MIPI-DSI controller.
+ * @reg_base: base address to memory mapped SRF of MIPI-DSI controller.
+ *	(virtual address)
+ * @lock: the mutex protecting this data structure.
+ * @dsim_info: infomation for configuring mipi-dsi controller.
+ * @master_ops: callbacks to mipi-dsi operations.
+ * @dsim_lcd_dev: pointer to activated ddi device.
+ *	(it would be registered by mipi-dsi driver.)
+ * @dsim_lcd_drv: pointer to activated_ddi driver.
+ *	(it would be registered by mipi-dsi driver.)
+ * @lcd_info: pointer to mipi_lcd_info structure.
+ * @state: specifies status of MIPI-DSI controller.
+ *	the status could be RESET, INIT, STOP, HSCLKEN and ULPS.
+ * @data_lane: specifiec enabled data lane number.
+ *	this variable would be set by driver according to e_no_data_lane
+ *	automatically.
+ * @e_clk_src: select byte clock source.
+ * @pd: pointer to MIPI-DSI driver platform data.
+ */
+struct mipi_dsim_device {
+	struct device			*dev;
+	int				id;
+	struct resource			*res;
+	struct clk			*clock;
+	unsigned int			irq;
+	void __iomem			*reg_base;
+	struct mutex			lock;
+
+	struct mipi_dsim_config		*dsim_config;
+	struct mipi_dsim_master_ops	*master_ops;
+	struct mipi_dsim_lcd_device	*dsim_lcd_dev;
+	struct mipi_dsim_lcd_driver	*dsim_lcd_drv;
+
+	unsigned int			state;
+	unsigned int			data_lane;
+	unsigned int			e_clk_src;
+	bool				suspended;
+
+	struct mipi_dsim_platform_data	*pd;
+};
+
+/*
+ * struct mipi_dsim_platform_data - interface to platform data
+ *	for mipi-dsi driver.
+ *
+ * @lcd_panel_name: specifies lcd panel name registered to mipi-dsi driver.
+ *	lcd panel driver searched would be actived.
+ * @dsim_config: pointer of structure for configuring mipi-dsi controller.
+ * @enabled: indicate whether mipi controller got enabled or not.
+ * @lcd_panel_info: pointer for lcd panel specific structure.
+ *	this structure specifies width, height, timing and polarity and so on.
+ * @phy_enable: pointer to a callback controlling D-PHY enable/reset
+ */
+struct mipi_dsim_platform_data {
+	char				lcd_panel_name[PANEL_NAME_SIZE];
+
+	struct mipi_dsim_config		*dsim_config;
+	unsigned int			enabled;
+	void				*lcd_panel_info;
+
+	int (*phy_enable)(struct platform_device *pdev, bool on);
+};
+
+/*
+ * struct mipi_dsim_master_ops - callbacks to mipi-dsi operations.
+ *
+ * @cmd_write: transfer command to lcd panel at LP mode.
+ * @cmd_read: read command from rx register.
+ * @get_dsim_frame_done: get the status that all screen data have been
+ *	transferred to mipi-dsi.
+ * @clear_dsim_frame_done: clear frame done status.
+ * @get_fb_frame_done: get frame done status of display controller.
+ * @trigger: trigger display controller.
+ *	- this one would be used only in case of CPU mode.
+ *  @set_early_blank_mode: set framebuffer blank mode.
+ *	- this callback should be called prior to fb_blank() by a client driver
+ *	only if needing.
+ *  @set_blank_mode: set framebuffer blank mode.
+ *	- this callback should be called after fb_blank() by a client driver
+ *	only if needing.
+ */
+
+struct mipi_dsim_master_ops {
+	int (*cmd_write)(struct mipi_dsim_device *dsim, unsigned int data_id,
+		const unsigned char *data0, unsigned int data1);
+	int (*cmd_read)(struct mipi_dsim_device *dsim, unsigned int data_id,
+		unsigned int data0, unsigned int req_size, u8 *rx_buf);
+	int (*get_dsim_frame_done)(struct mipi_dsim_device *dsim);
+	int (*clear_dsim_frame_done)(struct mipi_dsim_device *dsim);
+
+	int (*get_fb_frame_done)(struct fb_info *info);
+	void (*trigger)(struct fb_info *info);
+	int (*set_early_blank_mode)(struct mipi_dsim_device *dsim, int power);
+	int (*set_blank_mode)(struct mipi_dsim_device *dsim, int power);
+};
+
+/*
+ * device structure for mipi-dsi based lcd panel.
+ *
+ * @name: name of the device to use with this device, or an
+ *	alias for that name.
+ * @dev: driver model representation of the device.
+ * @id: id of device to be registered.
+ * @bus_id: bus id for identifing connected bus
+ *	and this bus id should be same as id of mipi_dsim_device.
+ * @irq: irq number for signaling when framebuffer transfer of
+ *	lcd panel module is completed.
+ *	this irq would be used only for MIPI-DSI based CPU mode lcd panel.
+ * @master: pointer to mipi-dsi master device object.
+ * @platform_data: lcd panel specific platform data.
+ */
+struct mipi_dsim_lcd_device {
+	char			*name;
+	struct device		dev;
+	int			id;
+	int			bus_id;
+	int			irq;
+
+	struct mipi_dsim_device *master;
+	void			*platform_data;
+};
+
+/*
+ * driver structure for mipi-dsi based lcd panel.
+ *
+ * this structure should be registered by lcd panel driver.
+ * mipi-dsi driver seeks lcd panel registered through name field
+ * and calls these callback functions in appropriate time.
+ *
+ * @name: name of the driver to use with this device, or an
+ *	alias for that name.
+ * @id: id of driver to be registered.
+ *	this id would be used for finding device object registered.
+ */
+struct mipi_dsim_lcd_driver {
+	char			*name;
+	int			id;
+
+	void	(*power_on)(struct mipi_dsim_lcd_device *dsim_dev, int enable);
+	void	(*set_sequence)(struct mipi_dsim_lcd_device *dsim_dev);
+	int	(*probe)(struct mipi_dsim_lcd_device *dsim_dev);
+	int	(*remove)(struct mipi_dsim_lcd_device *dsim_dev);
+	void	(*shutdown)(struct mipi_dsim_lcd_device *dsim_dev);
+	int	(*suspend)(struct mipi_dsim_lcd_device *dsim_dev);
+	int	(*resume)(struct mipi_dsim_lcd_device *dsim_dev);
+};
+
+/*
+ * register mipi_dsim_lcd_device to mipi-dsi master.
+ */
+int exynos_mipi_dsi_register_lcd_device(struct mipi_dsim_lcd_device
+						*lcd_dev);
+/**
+ * register mipi_dsim_lcd_driver object defined by lcd panel driver
+ * to mipi-dsi driver.
+ */
+int exynos_mipi_dsi_register_lcd_driver(struct mipi_dsim_lcd_driver
+						*lcd_drv);
+#endif /* _EXYNOS_MIPI_DSIM_H */
diff --git a/include/video/gbe.h b/include/video/gbe.h
new file mode 100644
index 00000000..ad510284
--- /dev/null
+++ b/include/video/gbe.h
@@ -0,0 +1,317 @@
+/*
+ * include/video/gbe.h -- SGI GBE (Graphics Back End)
+ *
+ * Copyright (C) 1999 Silicon Graphics, Inc. (Jeffrey Newquist)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License version 2 as published by the Free Software Foundation.
+ */
+
+#ifndef __GBE_H__
+#define __GBE_H__
+
+struct sgi_gbe {
+	volatile uint32_t ctrlstat;	/* general control */
+	volatile uint32_t dotclock;	/* dot clock PLL control */
+	volatile uint32_t i2c;		/* crt I2C control */
+	volatile uint32_t sysclk;	/* system clock PLL control */
+	volatile uint32_t i2cfp;	/* flat panel I2C control */
+	volatile uint32_t id;		/* device id/chip revision */
+	volatile uint32_t config;       /* power on configuration [1] */
+	volatile uint32_t bist;         /* internal bist status [1] */
+	uint32_t _pad0[0x010000/4 - 8];
+	volatile uint32_t vt_xy;	/* current dot coords */
+	volatile uint32_t vt_xymax;	/* maximum dot coords */
+	volatile uint32_t vt_vsync;	/* vsync on/off */
+	volatile uint32_t vt_hsync;	/* hsync on/off */
+	volatile uint32_t vt_vblank;	/* vblank on/off */
+	volatile uint32_t vt_hblank;	/* hblank on/off */
+	volatile uint32_t vt_flags;	/* polarity of vt signals */
+	volatile uint32_t vt_f2rf_lock;	/* f2rf & framelck y coord */
+	volatile uint32_t vt_intr01;	/* intr 0,1 y coords */
+	volatile uint32_t vt_intr23;	/* intr 2,3 y coords */
+	volatile uint32_t fp_hdrv;	/* flat panel hdrv on/off */
+	volatile uint32_t fp_vdrv;	/* flat panel vdrv on/off */
+	volatile uint32_t fp_de;	/* flat panel de on/off */
+	volatile uint32_t vt_hpixen;	/* intrnl horiz pixel on/off */
+	volatile uint32_t vt_vpixen;	/* intrnl vert pixel on/off */
+	volatile uint32_t vt_hcmap;	/* cmap write (horiz) */
+	volatile uint32_t vt_vcmap;	/* cmap write (vert) */
+	volatile uint32_t did_start_xy;	/* eol/f did/xy reset val */
+	volatile uint32_t crs_start_xy;	/* eol/f crs/xy reset val */
+	volatile uint32_t vc_start_xy;	/* eol/f vc/xy reset val */
+	uint32_t _pad1[0xffb0/4];
+	volatile uint32_t ovr_width_tile;/*overlay plane ctrl 0 */
+	volatile uint32_t ovr_inhwctrl;	/* overlay plane ctrl 1 */
+	volatile uint32_t ovr_control;	/* overlay plane ctrl 1 */
+	uint32_t _pad2[0xfff4/4];
+	volatile uint32_t frm_size_tile;/* normal plane ctrl 0 */
+	volatile uint32_t frm_size_pixel;/*normal plane ctrl 1 */
+	volatile uint32_t frm_inhwctrl;	/* normal plane ctrl 2 */
+	volatile uint32_t frm_control;	/* normal plane ctrl 3 */
+	uint32_t _pad3[0xfff0/4];
+	volatile uint32_t did_inhwctrl;	/* DID control */
+	volatile uint32_t did_control;	/* DID shadow */
+	uint32_t _pad4[0x7ff8/4];
+	volatile uint32_t mode_regs[32];/* WID table */
+	uint32_t _pad5[0x7f80/4];
+	volatile uint32_t cmap[6144];	/* color map */
+	uint32_t _pad6[0x2000/4];
+	volatile uint32_t cm_fifo;	/* color map fifo status */
+	uint32_t _pad7[0x7ffc/4];
+	volatile uint32_t gmap[256];	/* gamma map */
+	uint32_t _pad8[0x7c00/4];
+	volatile uint32_t gmap10[1024];	/* gamma map */
+	uint32_t _pad9[0x7000/4];
+	volatile uint32_t crs_pos;	/* cusror control 0 */
+	volatile uint32_t crs_ctl;	/* cusror control 1 */
+	volatile uint32_t crs_cmap[3];	/* crs cmap */
+	uint32_t _pad10[0x7fec/4];
+	volatile uint32_t crs_glyph[64];/* crs glyph */
+	uint32_t _pad11[0x7f00/4];
+	volatile uint32_t vc_0;	/* video capture crtl 0 */
+	volatile uint32_t vc_1;	/* video capture crtl 1 */
+	volatile uint32_t vc_2;	/* video capture crtl 2 */
+	volatile uint32_t vc_3;	/* video capture crtl 3 */
+	volatile uint32_t vc_4;	/* video capture crtl 4 */
+	volatile uint32_t vc_5;	/* video capture crtl 5 */
+	volatile uint32_t vc_6;	/* video capture crtl 6 */
+	volatile uint32_t vc_7;	/* video capture crtl 7 */
+	volatile uint32_t vc_8;	/* video capture crtl 8 */
+};
+
+#define MASK(msb, lsb)		\
+	( (((u32)1<<((msb)-(lsb)+1))-1) << (lsb) )
+#define GET(v, msb, lsb)	\
+	( ((u32)(v) & MASK(msb,lsb)) >> (lsb) )
+#define SET(v, f, msb, lsb)	\
+	( (v) = ((v)&~MASK(msb,lsb)) | (( (u32)(f)<<(lsb) ) & MASK(msb,lsb)) )
+
+#define GET_GBE_FIELD(reg, field, v)		\
+	GET((v), GBE_##reg##_##field##_MSB, GBE_##reg##_##field##_LSB)
+#define SET_GBE_FIELD(reg, field, v, f)		\
+	SET((v), (f), GBE_##reg##_##field##_MSB, GBE_##reg##_##field##_LSB)
+
+/*
+ * Bit mask information
+ */
+#define GBE_CTRLSTAT_CHIPID_MSB		 3
+#define GBE_CTRLSTAT_CHIPID_LSB		 0
+#define GBE_CTRLSTAT_SENSE_N_MSB	 4
+#define GBE_CTRLSTAT_SENSE_N_LSB	 4
+#define GBE_CTRLSTAT_PCLKSEL_MSB	29
+#define GBE_CTRLSTAT_PCLKSEL_LSB	28
+
+#define GBE_DOTCLK_M_MSB		 7
+#define GBE_DOTCLK_M_LSB		 0
+#define GBE_DOTCLK_N_MSB		13
+#define GBE_DOTCLK_N_LSB		 8
+#define GBE_DOTCLK_P_MSB		15
+#define GBE_DOTCLK_P_LSB		14
+#define GBE_DOTCLK_RUN_MSB		20
+#define GBE_DOTCLK_RUN_LSB		20
+
+#define GBE_VT_XY_Y_MSB		23
+#define GBE_VT_XY_Y_LSB		12
+#define GBE_VT_XY_X_MSB		11
+#define GBE_VT_XY_X_LSB		 0
+#define GBE_VT_XY_FREEZE_MSB		31
+#define GBE_VT_XY_FREEZE_LSB		31
+
+#define GBE_FP_VDRV_ON_MSB	23
+#define GBE_FP_VDRV_ON_LSB	12
+#define GBE_FP_VDRV_OFF_MSB	11
+#define GBE_FP_VDRV_OFF_LSB	0
+
+#define GBE_FP_HDRV_ON_MSB	23
+#define GBE_FP_HDRV_ON_LSB	12
+#define GBE_FP_HDRV_OFF_MSB	11
+#define GBE_FP_HDRV_OFF_LSB	0
+
+#define GBE_FP_DE_ON_MSB		23
+#define GBE_FP_DE_ON_LSB		12
+#define GBE_FP_DE_OFF_MSB		11
+#define GBE_FP_DE_OFF_LSB		0
+
+#define GBE_VT_VSYNC_VSYNC_ON_MSB	23
+#define GBE_VT_VSYNC_VSYNC_ON_LSB	12
+#define GBE_VT_VSYNC_VSYNC_OFF_MSB	11
+#define GBE_VT_VSYNC_VSYNC_OFF_LSB	 0
+
+#define GBE_VT_HSYNC_HSYNC_ON_MSB	23
+#define GBE_VT_HSYNC_HSYNC_ON_LSB	12
+#define GBE_VT_HSYNC_HSYNC_OFF_MSB	11
+#define GBE_VT_HSYNC_HSYNC_OFF_LSB	 0
+
+#define GBE_VT_VBLANK_VBLANK_ON_MSB	23
+#define GBE_VT_VBLANK_VBLANK_ON_LSB	12
+#define GBE_VT_VBLANK_VBLANK_OFF_MSB	11
+#define GBE_VT_VBLANK_VBLANK_OFF_LSB	 0
+
+#define GBE_VT_HBLANK_HBLANK_ON_MSB	23
+#define GBE_VT_HBLANK_HBLANK_ON_LSB	12
+#define GBE_VT_HBLANK_HBLANK_OFF_MSB	11
+#define GBE_VT_HBLANK_HBLANK_OFF_LSB	 0
+
+#define GBE_VT_FLAGS_F2RF_HIGH_MSB	 6
+#define GBE_VT_FLAGS_F2RF_HIGH_LSB	 6
+#define GBE_VT_FLAGS_SYNC_LOW_MSB	 5
+#define GBE_VT_FLAGS_SYNC_LOW_LSB	 5
+#define GBE_VT_FLAGS_SYNC_HIGH_MSB	 4
+#define GBE_VT_FLAGS_SYNC_HIGH_LSB	 4
+#define GBE_VT_FLAGS_HDRV_LOW_MSB	 3
+#define GBE_VT_FLAGS_HDRV_LOW_LSB	 3
+#define GBE_VT_FLAGS_HDRV_INVERT_MSB	 2
+#define GBE_VT_FLAGS_HDRV_INVERT_LSB	 2
+#define GBE_VT_FLAGS_VDRV_LOW_MSB	 1
+#define GBE_VT_FLAGS_VDRV_LOW_LSB	 1
+#define GBE_VT_FLAGS_VDRV_INVERT_MSB	 0
+#define GBE_VT_FLAGS_VDRV_INVERT_LSB	 0
+
+#define GBE_VT_VCMAP_VCMAP_ON_MSB	23
+#define GBE_VT_VCMAP_VCMAP_ON_LSB	12
+#define GBE_VT_VCMAP_VCMAP_OFF_MSB	11
+#define GBE_VT_VCMAP_VCMAP_OFF_LSB	 0
+
+#define GBE_VT_HCMAP_HCMAP_ON_MSB	23
+#define GBE_VT_HCMAP_HCMAP_ON_LSB	12
+#define GBE_VT_HCMAP_HCMAP_OFF_MSB	11
+#define GBE_VT_HCMAP_HCMAP_OFF_LSB	 0
+
+#define GBE_VT_XYMAX_MAXX_MSB	11
+#define GBE_VT_XYMAX_MAXX_LSB	 0
+#define GBE_VT_XYMAX_MAXY_MSB	23
+#define GBE_VT_XYMAX_MAXY_LSB	12
+
+#define GBE_VT_HPIXEN_HPIXEN_ON_MSB	23
+#define GBE_VT_HPIXEN_HPIXEN_ON_LSB	12
+#define GBE_VT_HPIXEN_HPIXEN_OFF_MSB	11
+#define GBE_VT_HPIXEN_HPIXEN_OFF_LSB	 0
+
+#define GBE_VT_VPIXEN_VPIXEN_ON_MSB	23
+#define GBE_VT_VPIXEN_VPIXEN_ON_LSB	12
+#define GBE_VT_VPIXEN_VPIXEN_OFF_MSB	11
+#define GBE_VT_VPIXEN_VPIXEN_OFF_LSB	 0
+
+#define GBE_OVR_CONTROL_OVR_DMA_ENABLE_MSB	 0
+#define GBE_OVR_CONTROL_OVR_DMA_ENABLE_LSB	 0
+
+#define GBE_OVR_INHWCTRL_OVR_DMA_ENABLE_MSB	 0
+#define GBE_OVR_INHWCTRL_OVR_DMA_ENABLE_LSB	 0
+
+#define GBE_OVR_WIDTH_TILE_OVR_FIFO_RESET_MSB	13
+#define GBE_OVR_WIDTH_TILE_OVR_FIFO_RESET_LSB	13
+
+#define GBE_FRM_CONTROL_FRM_DMA_ENABLE_MSB	 0
+#define GBE_FRM_CONTROL_FRM_DMA_ENABLE_LSB	 0
+#define GBE_FRM_CONTROL_FRM_TILE_PTR_MSB	31
+#define GBE_FRM_CONTROL_FRM_TILE_PTR_LSB	 9
+#define GBE_FRM_CONTROL_FRM_LINEAR_MSB		 1
+#define GBE_FRM_CONTROL_FRM_LINEAR_LSB		 1
+
+#define GBE_FRM_INHWCTRL_FRM_DMA_ENABLE_MSB	 0
+#define GBE_FRM_INHWCTRL_FRM_DMA_ENABLE_LSB	 0
+
+#define GBE_FRM_SIZE_TILE_FRM_WIDTH_TILE_MSB	12
+#define GBE_FRM_SIZE_TILE_FRM_WIDTH_TILE_LSB	 5
+#define GBE_FRM_SIZE_TILE_FRM_RHS_MSB		 4
+#define GBE_FRM_SIZE_TILE_FRM_RHS_LSB		 0
+#define GBE_FRM_SIZE_TILE_FRM_DEPTH_MSB		14
+#define GBE_FRM_SIZE_TILE_FRM_DEPTH_LSB		13
+#define GBE_FRM_SIZE_TILE_FRM_FIFO_RESET_MSB	15
+#define GBE_FRM_SIZE_TILE_FRM_FIFO_RESET_LSB	15
+
+#define GBE_FRM_SIZE_PIXEL_FB_HEIGHT_PIX_MSB	31
+#define GBE_FRM_SIZE_PIXEL_FB_HEIGHT_PIX_LSB	16
+
+#define GBE_DID_CONTROL_DID_DMA_ENABLE_MSB	 0
+#define GBE_DID_CONTROL_DID_DMA_ENABLE_LSB	 0
+#define GBE_DID_INHWCTRL_DID_DMA_ENABLE_MSB	 0
+#define GBE_DID_INHWCTRL_DID_DMA_ENABLE_LSB	 0
+
+#define GBE_DID_START_XY_DID_STARTY_MSB		23
+#define GBE_DID_START_XY_DID_STARTY_LSB		12
+#define GBE_DID_START_XY_DID_STARTX_MSB		11
+#define GBE_DID_START_XY_DID_STARTX_LSB		 0
+
+#define GBE_CRS_START_XY_CRS_STARTY_MSB		23
+#define GBE_CRS_START_XY_CRS_STARTY_LSB		12
+#define GBE_CRS_START_XY_CRS_STARTX_MSB		11
+#define GBE_CRS_START_XY_CRS_STARTX_LSB		 0
+
+#define GBE_WID_AUX_MSB		12
+#define GBE_WID_AUX_LSB		11
+#define GBE_WID_GAMMA_MSB	10
+#define GBE_WID_GAMMA_LSB	10
+#define GBE_WID_CM_MSB		 9
+#define GBE_WID_CM_LSB		 5
+#define GBE_WID_TYP_MSB		 4
+#define GBE_WID_TYP_LSB		 2
+#define GBE_WID_BUF_MSB		 1
+#define GBE_WID_BUF_LSB		 0
+
+#define GBE_VC_START_XY_VC_STARTY_MSB	23
+#define GBE_VC_START_XY_VC_STARTY_LSB	12
+#define GBE_VC_START_XY_VC_STARTX_MSB	11
+#define GBE_VC_START_XY_VC_STARTX_LSB	 0
+
+/* Constants */
+
+#define GBE_FRM_DEPTH_8		0
+#define GBE_FRM_DEPTH_16	1
+#define GBE_FRM_DEPTH_32	2
+
+#define GBE_CMODE_I8		0
+#define GBE_CMODE_I12		1
+#define GBE_CMODE_RG3B2		2
+#define GBE_CMODE_RGB4		3
+#define GBE_CMODE_ARGB5		4
+#define GBE_CMODE_RGB8		5
+#define GBE_CMODE_RGBA5		6
+#define GBE_CMODE_RGB10		7
+
+#define GBE_BMODE_BOTH		3
+
+#define GBE_CRS_MAGIC		54
+#define GBE_PIXEN_MAGIC_ON	19
+#define GBE_PIXEN_MAGIC_OFF	 2
+
+#define GBE_TLB_SIZE		128
+
+/* [1] - only GBE revision 2 and later */
+
+/*
+ * Video Timing Data Structure
+ */
+
+struct gbe_timing_info {
+	int flags;
+	short width;		/* Monitor resolution */
+	short height;
+	int fields_sec;		/* fields/sec  (Hz -3 dec. places */
+	int cfreq;		/* pixel clock frequency (MHz -3 dec. places) */
+	short htotal;		/* Horizontal total pixels */
+	short hblank_start;	/* Horizontal blank start */
+	short hblank_end;	/* Horizontal blank end */
+	short hsync_start;	/* Horizontal sync start */
+	short hsync_end;	/* Horizontal sync end */
+	short vtotal;		/* Vertical total lines */
+	short vblank_start;	/* Vertical blank start */
+	short vblank_end;	/* Vertical blank end */
+	short vsync_start;	/* Vertical sync start */
+	short vsync_end;	/* Vertical sync end */
+	short pll_m;		/* PLL M parameter */
+	short pll_n;		/* PLL P parameter */
+	short pll_p;		/* PLL N parameter */
+};
+
+/* Defines for gbe_vof_info_t flags */
+
+#define GBE_VOF_UNKNOWNMON	1
+#define GBE_VOF_STEREO		2
+#define GBE_VOF_DO_GENSYNC	4	/* enable incoming sync */
+#define GBE_VOF_SYNC_ON_GREEN	8	/* sync on green */
+#define GBE_VOF_FLATPANEL	0x1000	/* FLATPANEL Timing */
+#define GBE_VOF_MAGICKEY	0x2000	/* Backdoor key */
+
+#endif		/* ! __GBE_H__ */
diff --git a/include/video/hecubafb.h b/include/video/hecubafb.h
new file mode 100644
index 00000000..7b995233
--- /dev/null
+++ b/include/video/hecubafb.h
@@ -0,0 +1,51 @@
+/*
+ * hecubafb.h - definitions for the hecuba framebuffer driver
+ *
+ * Copyright (C) 2008 by Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ */
+
+#ifndef _LINUX_HECUBAFB_H_
+#define _LINUX_HECUBAFB_H_
+
+/* Apollo controller specific defines */
+#define APOLLO_START_NEW_IMG	0xA0
+#define APOLLO_STOP_IMG_DATA	0xA1
+#define APOLLO_DISPLAY_IMG	0xA2
+#define APOLLO_ERASE_DISPLAY	0xA3
+#define APOLLO_INIT_DISPLAY	0xA4
+
+/* Hecuba interface specific defines */
+#define HCB_WUP_BIT	0x01
+#define HCB_DS_BIT 	0x02
+#define HCB_RW_BIT 	0x04
+#define HCB_CD_BIT 	0x08
+#define HCB_ACK_BIT 	0x80
+
+/* struct used by hecuba. board specific stuff comes from *board */
+struct hecubafb_par {
+	struct fb_info *info;
+	struct hecuba_board *board;
+	void (*send_command)(struct hecubafb_par *, unsigned char);
+	void (*send_data)(struct hecubafb_par *, unsigned char);
+};
+
+/* board specific routines
+board drivers can implement wait_for_ack with interrupts if desired. if
+wait_for_ack is called with clear=0, then go to sleep and return when ack
+goes hi or if wait_for_ack with clear=1, then return when ack goes lo */
+struct hecuba_board {
+	struct module *owner;
+	void (*remove)(struct hecubafb_par *);
+	void (*set_ctl)(struct hecubafb_par *, unsigned char, unsigned char);
+	void (*set_data)(struct hecubafb_par *, unsigned char);
+	void (*wait_for_ack)(struct hecubafb_par *, int);
+	int (*init)(struct hecubafb_par *);
+};
+
+
+#endif
diff --git a/include/video/iga.h b/include/video/iga.h
new file mode 100644
index 00000000..5a48f165
--- /dev/null
+++ b/include/video/iga.h
@@ -0,0 +1,24 @@
+/* $Id: iga.h,v 1.2 1999/09/11 22:56:31 zaitcev Exp $
+ * iga1682.h: Sparc/PCI iga1682 driver constants etc.
+ *
+ * Copyleft 1998 V. Roganov and G. Raiko
+ */
+
+#ifndef _IGA1682_H
+#define _IGA1682_H 1
+
+#define IGA_ATTR_CTL			0x3C0
+#define   IGA_IDX_VGA_OVERSCAN		0x11
+#define DAC_W_INDEX                     0x03C8
+#define DAC_DATA                        0x03C9
+#define IGA_EXT_CNTRL                   0x3CE
+#define   IGA_IDX_EXT_BUS_CNTL          0x30
+#define     MEM_SIZE_ALIAS              0x3
+#define     MEM_SIZE_1M                 0x0
+#define     MEM_SIZE_2M                 0x1
+#define     MEM_SIZE_4M                 0x2
+#define     MEM_SIZE_RESERVED           0x3
+#define   IGA_IDX_OVERSCAN_COLOR        0x58
+#define   IGA_IDX_EXT_MEM_2             0x72
+
+#endif /* !(_IGA1682_H) */
diff --git a/include/video/ili9320.h b/include/video/ili9320.h
new file mode 100644
index 00000000..e5d1622e
--- /dev/null
+++ b/include/video/ili9320.h
@@ -0,0 +1,201 @@
+/* include/video/ili9320.c
+ *
+ * ILI9320 LCD controller configuration control.
+ *
+ * Copyright 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define ILI9320_REG(x)	(x)
+
+#define ILI9320_INDEX			ILI9320_REG(0x00)
+
+#define ILI9320_OSCILATION		ILI9320_REG(0x00)
+#define ILI9320_DRIVER			ILI9320_REG(0x01)
+#define ILI9320_DRIVEWAVE		ILI9320_REG(0x02)
+#define ILI9320_ENTRYMODE		ILI9320_REG(0x03)
+#define ILI9320_RESIZING		ILI9320_REG(0x04)
+#define ILI9320_DISPLAY1		ILI9320_REG(0x07)
+#define ILI9320_DISPLAY2		ILI9320_REG(0x08)
+#define ILI9320_DISPLAY3		ILI9320_REG(0x09)
+#define ILI9320_DISPLAY4		ILI9320_REG(0x0A)
+#define ILI9320_RGB_IF1			ILI9320_REG(0x0C)
+#define ILI9320_FRAMEMAKER		ILI9320_REG(0x0D)
+#define ILI9320_RGB_IF2			ILI9320_REG(0x0F)
+
+#define ILI9320_POWER1			ILI9320_REG(0x10)
+#define ILI9320_POWER2			ILI9320_REG(0x11)
+#define ILI9320_POWER3			ILI9320_REG(0x12)
+#define ILI9320_POWER4			ILI9320_REG(0x13)
+#define ILI9320_GRAM_HORIZ_ADDR		ILI9320_REG(0x20)
+#define ILI9320_GRAM_VERT_ADD		ILI9320_REG(0x21)
+#define ILI9320_POWER7			ILI9320_REG(0x29)
+#define ILI9320_FRAME_RATE_COLOUR	ILI9320_REG(0x2B)
+
+#define ILI9320_GAMMA1			ILI9320_REG(0x30)
+#define ILI9320_GAMMA2			ILI9320_REG(0x31)
+#define ILI9320_GAMMA3			ILI9320_REG(0x32)
+#define ILI9320_GAMMA4			ILI9320_REG(0x35)
+#define ILI9320_GAMMA5			ILI9320_REG(0x36)
+#define ILI9320_GAMMA6			ILI9320_REG(0x37)
+#define ILI9320_GAMMA7			ILI9320_REG(0x38)
+#define ILI9320_GAMMA8			ILI9320_REG(0x39)
+#define ILI9320_GAMMA9			ILI9320_REG(0x3C)
+#define ILI9320_GAMMA10			ILI9320_REG(0x3D)
+
+#define ILI9320_HORIZ_START		ILI9320_REG(0x50)
+#define ILI9320_HORIZ_END		ILI9320_REG(0x51)
+#define ILI9320_VERT_START		ILI9320_REG(0x52)
+#define ILI9320_VERT_END		ILI9320_REG(0x53)
+
+#define ILI9320_DRIVER2			ILI9320_REG(0x60)
+#define ILI9320_BASE_IMAGE		ILI9320_REG(0x61)
+#define ILI9320_VERT_SCROLL		ILI9320_REG(0x6a)
+
+#define ILI9320_PARTIAL1_POSITION	ILI9320_REG(0x80)
+#define ILI9320_PARTIAL1_START		ILI9320_REG(0x81)
+#define ILI9320_PARTIAL1_END		ILI9320_REG(0x82)
+#define ILI9320_PARTIAL2_POSITION	ILI9320_REG(0x83)
+#define ILI9320_PARTIAL2_START		ILI9320_REG(0x84)
+#define ILI9320_PARTIAL2_END		ILI9320_REG(0x85)
+
+#define ILI9320_INTERFACE1		ILI9320_REG(0x90)
+#define ILI9320_INTERFACE2		ILI9320_REG(0x92)
+#define ILI9320_INTERFACE3		ILI9320_REG(0x93)
+#define ILI9320_INTERFACE4		ILI9320_REG(0x95)
+#define ILI9320_INTERFACE5		ILI9320_REG(0x97)
+#define ILI9320_INTERFACE6		ILI9320_REG(0x98)
+
+/* Register contents definitions. */
+
+#define ILI9320_OSCILATION_OSC		(1 << 0)
+
+#define ILI9320_DRIVER_SS		(1 << 8)
+#define ILI9320_DRIVER_SM		(1 << 10)
+
+#define ILI9320_DRIVEWAVE_EOR		(1 << 8)
+#define ILI9320_DRIVEWAVE_BC		(1 << 9)
+#define ILI9320_DRIVEWAVE_MUSTSET	(1 << 10)
+
+#define ILI9320_ENTRYMODE_AM		(1 << 3)
+#define ILI9320_ENTRYMODE_ID(x)		((x) << 4)
+#define ILI9320_ENTRYMODE_ORG		(1 << 7)
+#define ILI9320_ENTRYMODE_HWM		(1 << 8)
+#define ILI9320_ENTRYMODE_BGR		(1 << 12)
+#define ILI9320_ENTRYMODE_DFM		(1 << 14)
+#define ILI9320_ENTRYMODE_TRI		(1 << 15)
+
+
+#define ILI9320_RESIZING_RSZ(x)		((x) << 0)
+#define ILI9320_RESIZING_RCH(x)		((x) << 4)
+#define ILI9320_RESIZING_RCV(x)		((x) << 8)
+
+
+#define ILI9320_DISPLAY1_D(x)		((x) << 0)
+#define ILI9320_DISPLAY1_CL		(1 << 3)
+#define ILI9320_DISPLAY1_DTE		(1 << 4)
+#define ILI9320_DISPLAY1_GON		(1 << 5)
+#define ILI9320_DISPLAY1_BASEE		(1 << 8)
+#define ILI9320_DISPLAY1_PTDE(x)	((x) << 12)
+
+
+#define ILI9320_DISPLAY2_BP(x)		((x) << 0)
+#define ILI9320_DISPLAY2_FP(x)		((x) << 8)
+
+
+#define ILI9320_RGBIF1_RIM_RGB18	(0 << 0)
+#define ILI9320_RGBIF1_RIM_RGB16	(1 << 0)
+#define ILI9320_RGBIF1_RIM_RGB6		(2 << 0)
+
+#define ILI9320_RGBIF1_CLK_INT		(0 << 4)
+#define ILI9320_RGBIF1_CLK_RGBIF	(1 << 4)
+#define ILI9320_RGBIF1_CLK_VSYNC	(2 << 4)
+
+#define ILI9320_RGBIF1_RM		(1 << 8)
+
+#define ILI9320_RGBIF1_ENC_FRAMES(x)	(((x) - 1)<< 13)
+
+#define ILI9320_RGBIF2_DPL		(1 << 0)
+#define ILI9320_RGBIF2_EPL		(1 << 1)
+#define ILI9320_RGBIF2_HSPL		(1 << 3)
+#define ILI9320_RGBIF2_VSPL		(1 << 4)
+
+
+#define ILI9320_POWER1_SLP		(1 << 1)
+#define ILI9320_POWER1_DSTB		(1 << 2)
+#define ILI9320_POWER1_AP(x)		((x) << 4)
+#define ILI9320_POWER1_APE		(1 << 7)
+#define ILI9320_POWER1_BT(x)		((x) << 8)
+#define ILI9320_POWER1_SAP		(1 << 12)
+
+
+#define ILI9320_POWER2_VC(x)		((x) << 0)
+#define ILI9320_POWER2_DC0(x)		((x) << 4)
+#define ILI9320_POWER2_DC1(x)		((x) << 8)
+
+
+#define ILI9320_POWER3_VRH(x)		((x) << 0)
+#define ILI9320_POWER3_PON		(1 << 4)
+#define ILI9320_POWER3_VCMR		(1 << 8)
+
+
+#define ILI9320_POWER4_VREOUT(x)	((x) << 8)
+
+
+#define ILI9320_DRIVER2_SCNL(x)		((x) << 0)
+#define ILI9320_DRIVER2_NL(x)		((x) << 8)
+#define ILI9320_DRIVER2_GS		(1 << 15)
+
+
+#define ILI9320_BASEIMAGE_REV		(1 << 0)
+#define ILI9320_BASEIMAGE_VLE		(1 << 1)
+#define ILI9320_BASEIMAGE_NDL		(1 << 2)
+
+
+#define ILI9320_INTERFACE4_RTNE(x)	(x)
+#define ILI9320_INTERFACE4_DIVE(x)	((x) << 8)
+
+/* SPI interface definitions */
+
+#define ILI9320_SPI_IDCODE		(0x70)
+#define ILI9320_SPI_ID(x)		((x) << 2)
+#define ILI9320_SPI_READ		(0x01)
+#define ILI9320_SPI_WRITE		(0x00)
+#define ILI9320_SPI_DATA		(0x02)
+#define ILI9320_SPI_INDEX		(0x00)
+
+/* platform data to pass configuration from lcd */
+
+enum ili9320_suspend {
+	ILI9320_SUSPEND_OFF,
+	ILI9320_SUSPEND_DEEP,
+};
+
+struct ili9320_platdata {
+	unsigned short	hsize;
+	unsigned short	vsize;
+
+	enum ili9320_suspend suspend;
+
+	/* set the reset line, 0 = reset asserted, 1 = normal */
+	void		(*reset)(unsigned int val);
+
+	unsigned short	entry_mode;
+	unsigned short	display2;
+	unsigned short	display3;
+	unsigned short	display4;
+	unsigned short	rgb_if1;
+	unsigned short	rgb_if2;
+	unsigned short	interface2;
+	unsigned short	interface3;
+	unsigned short	interface4;
+	unsigned short	interface5;
+	unsigned short	interface6;
+};
+
diff --git a/include/video/kyro.h b/include/video/kyro.h
new file mode 100644
index 00000000..c563968e
--- /dev/null
+++ b/include/video/kyro.h
@@ -0,0 +1,93 @@
+/*
+ *  linux/drivers/video/kyro/kryo.h
+ *
+ *  Copyright (C) 2002 STMicroelectronics
+ *  Copyright (C) 2004 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _KYRO_H
+#define _KYRO_H
+
+struct kyrofb_info {
+	void __iomem *regbase;
+
+	u32 palette[16];
+	u32 HTot;	/* Hor Total Time    */
+	u32 HFP;	/* Hor Front Porch   */
+	u32 HST;	/* Hor Sync Time     */
+	u32 HBP;	/* Hor Back Porch    */
+	s32 HSP;		/* Hor Sync Polarity */
+	u32 VTot;	/* Ver Total Time    */
+	u32 VFP;	/* Ver Front Porch   */
+	u32 VST;	/* Ver Sync Time     */
+	u32 VBP;	/* Ver Back Porch    */
+	s32 VSP;		/* Ver Sync Polarity */
+	u32 XRES;	/* X Resolution      */
+	u32 YRES;	/* Y Resolution      */
+	u32 VFREQ;	/* Ver Frequency     */
+	u32 PIXCLK;	/* Pixel Clock       */
+	u32 HCLK;	/* Hor Clock         */
+
+	/* Useful to hold depth here for Linux */
+	u8 PIXDEPTH;
+
+#ifdef CONFIG_MTRR
+	int mtrr_handle;
+#endif
+};
+
+extern int kyro_dev_init(void);
+extern void kyro_dev_reset(void);
+
+extern unsigned char *kyro_dev_physical_fb_ptr(void);
+extern unsigned char *kyro_dev_virtual_fb_ptr(void);
+extern void *kyro_dev_physical_regs_ptr(void);
+extern void *kyro_dev_virtual_regs_ptr(void);
+extern unsigned int kyro_dev_fb_size(void);
+extern unsigned int kyro_dev_regs_size(void);
+
+extern u32 kyro_dev_overlay_offset(void);
+
+/*
+ * benedict.gaster@superh.com
+ * Added the follow IOCTLS for the creation of overlay services...
+ */
+#define KYRO_IOC_MAGIC 'k'
+
+#define KYRO_IOCTL_OVERLAY_CREATE       _IO(KYRO_IOC_MAGIC, 0)
+#define KYRO_IOCTL_OVERLAY_VIEWPORT_SET _IO(KYRO_IOC_MAGIC, 1)
+#define KYRO_IOCTL_SET_VIDEO_MODE       _IO(KYRO_IOC_MAGIC, 2)
+#define KYRO_IOCTL_UVSTRIDE             _IO(KYRO_IOC_MAGIC, 3)
+#define KYRO_IOCTL_OVERLAY_OFFSET       _IO(KYRO_IOC_MAGIC, 4)
+#define KYRO_IOCTL_STRIDE               _IO(KYRO_IOC_MAGIC, 5)
+
+/*
+ * The follow 3 structures are used to pass data from user space into the kernel
+ * for the creation of overlay surfaces and setting the video mode.
+ */
+typedef struct _OVERLAY_CREATE {
+	u32 ulWidth;
+	u32 ulHeight;
+	int bLinear;
+} overlay_create;
+
+typedef struct _OVERLAY_VIEWPORT_SET {
+	u32 xOrgin;
+	u32 yOrgin;
+	u32 xSize;
+	u32 ySize;
+} overlay_viewport_set;
+
+typedef struct _SET_VIDEO_MODE {
+	u32 ulWidth;
+	u32 ulHeight;
+	u32 ulScan;
+	u8 displayDepth;
+	int bLinear;
+} set_video_mode;
+
+#endif /* _KYRO_H */
diff --git a/include/video/mach64.h b/include/video/mach64.h
new file mode 100644
index 00000000..89e91c0c
--- /dev/null
+++ b/include/video/mach64.h
@@ -0,0 +1,1378 @@
+/*
+ * ATI Mach64 Register Definitions
+ *
+ * Copyright (C) 1997 Michael AK Tesch
+ *  written with much help from Jon Howell
+ *
+ * Updated for 3D RAGE PRO and 3D RAGE Mobility by Geert Uytterhoeven
+ *	
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ * most of the rest of this file comes from ATI sample code
+ */
+#ifndef REGMACH64_H
+#define REGMACH64_H
+
+/* NON-GUI MEMORY MAPPED Registers - expressed in BYTE offsets */
+
+/* Accelerator CRTC */
+#define CRTC_H_TOTAL_DISP	0x0000	/* Dword offset 0_00 */
+#define CRTC2_H_TOTAL_DISP	0x0000	/* Dword offset 0_00 */
+#define CRTC_H_SYNC_STRT_WID	0x0004	/* Dword offset 0_01 */
+#define CRTC2_H_SYNC_STRT_WID	0x0004	/* Dword offset 0_01 */
+#define CRTC_H_SYNC_STRT	0x0004
+#define CRTC2_H_SYNC_STRT	0x0004
+#define CRTC_H_SYNC_DLY		0x0005
+#define CRTC2_H_SYNC_DLY	0x0005
+#define CRTC_H_SYNC_WID		0x0006
+#define CRTC2_H_SYNC_WID	0x0006
+#define CRTC_V_TOTAL_DISP	0x0008	/* Dword offset 0_02 */
+#define CRTC2_V_TOTAL_DISP	0x0008	/* Dword offset 0_02 */
+#define CRTC_V_TOTAL		0x0008
+#define CRTC2_V_TOTAL		0x0008
+#define CRTC_V_DISP		0x000A
+#define CRTC2_V_DISP		0x000A
+#define CRTC_V_SYNC_STRT_WID	0x000C	/* Dword offset 0_03 */
+#define CRTC2_V_SYNC_STRT_WID	0x000C	/* Dword offset 0_03 */
+#define CRTC_V_SYNC_STRT	0x000C
+#define CRTC2_V_SYNC_STRT	0x000C
+#define CRTC_V_SYNC_WID		0x000E
+#define CRTC2_V_SYNC_WID	0x000E
+#define CRTC_VLINE_CRNT_VLINE	0x0010	/* Dword offset 0_04 */
+#define CRTC2_VLINE_CRNT_VLINE	0x0010	/* Dword offset 0_04 */
+#define CRTC_OFF_PITCH		0x0014	/* Dword offset 0_05 */
+#define CRTC_OFFSET		0x0014
+#define CRTC_PITCH		0x0016
+#define CRTC_INT_CNTL		0x0018	/* Dword offset 0_06 */
+#define CRTC_GEN_CNTL		0x001C	/* Dword offset 0_07 */
+#define CRTC_PIX_WIDTH		0x001D
+#define CRTC_FIFO		0x001E
+#define CRTC_EXT_DISP		0x001F
+
+/* Memory Buffer Control */
+#define DSP_CONFIG		0x0020	/* Dword offset 0_08 */
+#define PM_DSP_CONFIG		0x0020	/* Dword offset 0_08 (Mobility Only) */
+#define DSP_ON_OFF		0x0024	/* Dword offset 0_09 */
+#define PM_DSP_ON_OFF		0x0024	/* Dword offset 0_09 (Mobility Only) */
+#define TIMER_CONFIG		0x0028	/* Dword offset 0_0A */
+#define MEM_BUF_CNTL		0x002C	/* Dword offset 0_0B */
+#define MEM_ADDR_CONFIG		0x0034	/* Dword offset 0_0D */
+
+/* Accelerator CRTC */
+#define CRT_TRAP		0x0038	/* Dword offset 0_0E */
+
+#define I2C_CNTL_0		0x003C	/* Dword offset 0_0F */
+
+#define DSTN_CONTROL_LG		0x003C	/* Dword offset 0_0F (LG) */
+
+/* Overscan */
+#define OVR_CLR			0x0040	/* Dword offset 0_10 */
+#define OVR2_CLR		0x0040	/* Dword offset 0_10 */
+#define OVR_WID_LEFT_RIGHT	0x0044	/* Dword offset 0_11 */
+#define OVR2_WID_LEFT_RIGHT	0x0044	/* Dword offset 0_11 */
+#define OVR_WID_TOP_BOTTOM	0x0048	/* Dword offset 0_12 */
+#define OVR2_WID_TOP_BOTTOM	0x0048	/* Dword offset 0_12 */
+
+/* Memory Buffer Control */
+#define VGA_DSP_CONFIG		0x004C	/* Dword offset 0_13 */
+#define PM_VGA_DSP_CONFIG	0x004C	/* Dword offset 0_13 (Mobility Only) */
+#define VGA_DSP_ON_OFF		0x0050	/* Dword offset 0_14 */
+#define PM_VGA_DSP_ON_OFF	0x0050	/* Dword offset 0_14 (Mobility Only) */
+#define DSP2_CONFIG		0x0054	/* Dword offset 0_15 */
+#define PM_DSP2_CONFIG		0x0054	/* Dword offset 0_15 (Mobility Only) */
+#define DSP2_ON_OFF		0x0058	/* Dword offset 0_16 */
+#define PM_DSP2_ON_OFF		0x0058	/* Dword offset 0_16 (Mobility Only) */
+
+/* Accelerator CRTC */
+#define CRTC2_OFF_PITCH		0x005C	/* Dword offset 0_17 */
+
+/* Hardware Cursor */
+#define CUR_CLR0		0x0060	/* Dword offset 0_18 */
+#define CUR2_CLR0		0x0060	/* Dword offset 0_18 */
+#define CUR_CLR1		0x0064	/* Dword offset 0_19 */
+#define CUR2_CLR1		0x0064	/* Dword offset 0_19 */
+#define CUR_OFFSET		0x0068	/* Dword offset 0_1A */
+#define CUR2_OFFSET		0x0068	/* Dword offset 0_1A */
+#define CUR_HORZ_VERT_POSN	0x006C	/* Dword offset 0_1B */
+#define CUR2_HORZ_VERT_POSN	0x006C	/* Dword offset 0_1B */
+#define CUR_HORZ_VERT_OFF	0x0070	/* Dword offset 0_1C */
+#define CUR2_HORZ_VERT_OFF	0x0070	/* Dword offset 0_1C */
+
+#define CNFG_PANEL_LG		0x0074	/* Dword offset 0_1D (LG) */
+
+/* General I/O Control */
+#define GP_IO			0x0078	/* Dword offset 0_1E */
+
+/* Test and Debug */
+#define HW_DEBUG		0x007C	/* Dword offset 0_1F */
+
+/* Scratch Pad and Test */
+#define SCRATCH_REG0		0x0080	/* Dword offset 0_20 */
+#define SCRATCH_REG1		0x0084	/* Dword offset 0_21 */
+#define SCRATCH_REG2		0x0088	/* Dword offset 0_22 */
+#define SCRATCH_REG3		0x008C	/* Dword offset 0_23 */
+
+/* Clock Control */
+#define CLOCK_CNTL			0x0090	/* Dword offset 0_24 */
+/* CLOCK_CNTL register constants CT LAYOUT */
+#define CLOCK_SEL			0x0f
+#define CLOCK_SEL_INTERNAL		0x03
+#define CLOCK_SEL_EXTERNAL		0x0c
+#define CLOCK_DIV			0x30
+#define CLOCK_DIV1			0x00
+#define CLOCK_DIV2			0x10
+#define CLOCK_DIV4			0x20
+#define CLOCK_STROBE			0x40
+/*  ?					0x80 */
+/* CLOCK_CNTL register constants GX LAYOUT */
+#define CLOCK_BIT			0x04	/* For ICS2595 */
+#define CLOCK_PULSE			0x08	/* For ICS2595 */
+/*#define CLOCK_STROBE			0x40 dito as CT */
+#define CLOCK_DATA			0x80
+
+/* For internal PLL(CT) start */
+#define CLOCK_CNTL_ADDR			CLOCK_CNTL + 1
+#define PLL_WR_EN			0x02
+#define PLL_ADDR			0xfc
+#define CLOCK_CNTL_DATA			CLOCK_CNTL + 2
+#define PLL_DATA			0xff
+/* For internal PLL(CT) end */
+
+#define CLOCK_SEL_CNTL		0x0090	/* Dword offset 0_24 */
+
+/* Configuration */
+#define CNFG_STAT1		0x0094	/* Dword offset 0_25 */
+#define CNFG_STAT2		0x0098	/* Dword offset 0_26 */
+
+/* Bus Control */
+#define BUS_CNTL		0x00A0	/* Dword offset 0_28 */
+
+#define LCD_INDEX		0x00A4	/* Dword offset 0_29 */
+#define LCD_DATA		0x00A8	/* Dword offset 0_2A */
+
+#define HFB_PITCH_ADDR_LG	0x00A8	/* Dword offset 0_2A (LG) */
+
+/* Memory Control */
+#define EXT_MEM_CNTL		0x00AC	/* Dword offset 0_2B */
+#define MEM_CNTL		0x00B0	/* Dword offset 0_2C */
+#define MEM_VGA_WP_SEL		0x00B4	/* Dword offset 0_2D */
+#define MEM_VGA_RP_SEL		0x00B8	/* Dword offset 0_2E */
+
+#define I2C_CNTL_1		0x00BC	/* Dword offset 0_2F */
+
+#define LT_GIO_LG		0x00BC	/* Dword offset 0_2F (LG) */
+
+/* DAC Control */
+#define DAC_REGS		0x00C0	/* Dword offset 0_30 */
+#define DAC_W_INDEX		0x00C0	/* Dword offset 0_30 */
+#define DAC_DATA		0x00C1	/* Dword offset 0_30 */
+#define DAC_MASK		0x00C2	/* Dword offset 0_30 */
+#define DAC_R_INDEX		0x00C3	/* Dword offset 0_30 */
+#define DAC_CNTL		0x00C4	/* Dword offset 0_31 */
+
+#define EXT_DAC_REGS		0x00C8	/* Dword offset 0_32 */
+
+#define HORZ_STRETCHING_LG	0x00C8	/* Dword offset 0_32 (LG) */
+#define VERT_STRETCHING_LG	0x00CC	/* Dword offset 0_33 (LG) */
+
+/* Test and Debug */
+#define GEN_TEST_CNTL		0x00D0	/* Dword offset 0_34 */
+
+/* Custom Macros */
+#define CUSTOM_MACRO_CNTL	0x00D4	/* Dword offset 0_35 */
+
+#define LCD_GEN_CNTL_LG		0x00D4	/* Dword offset 0_35 (LG) */
+#define POWER_MANAGEMENT_LG	0x00D8	/* Dword offset 0_36 (LG) */
+
+/* Configuration */
+#define CNFG_CNTL		0x00DC	/* Dword offset 0_37 (CT, ET, VT) */
+#define CNFG_CHIP_ID		0x00E0	/* Dword offset 0_38 */
+#define CNFG_STAT0		0x00E4	/* Dword offset 0_39 */
+
+/* Test and Debug */
+#define CRC_SIG			0x00E8	/* Dword offset 0_3A */
+#define CRC2_SIG		0x00E8	/* Dword offset 0_3A */
+
+
+/* GUI MEMORY MAPPED Registers */
+
+/* Draw Engine Destination Trajectory */
+#define DST_OFF_PITCH		0x0100	/* Dword offset 0_40 */
+#define DST_X			0x0104	/* Dword offset 0_41 */
+#define DST_Y			0x0108	/* Dword offset 0_42 */
+#define DST_Y_X			0x010C	/* Dword offset 0_43 */
+#define DST_WIDTH		0x0110	/* Dword offset 0_44 */
+#define DST_HEIGHT		0x0114	/* Dword offset 0_45 */
+#define DST_HEIGHT_WIDTH	0x0118	/* Dword offset 0_46 */
+#define DST_X_WIDTH		0x011C	/* Dword offset 0_47 */
+#define DST_BRES_LNTH		0x0120	/* Dword offset 0_48 */
+#define DST_BRES_ERR		0x0124	/* Dword offset 0_49 */
+#define DST_BRES_INC		0x0128	/* Dword offset 0_4A */
+#define DST_BRES_DEC		0x012C	/* Dword offset 0_4B */
+#define DST_CNTL		0x0130	/* Dword offset 0_4C */
+#define DST_Y_X__ALIAS__	0x0134	/* Dword offset 0_4D */
+#define TRAIL_BRES_ERR		0x0138	/* Dword offset 0_4E */
+#define TRAIL_BRES_INC		0x013C	/* Dword offset 0_4F */
+#define TRAIL_BRES_DEC		0x0140	/* Dword offset 0_50 */
+#define LEAD_BRES_LNTH		0x0144	/* Dword offset 0_51 */
+#define Z_OFF_PITCH		0x0148	/* Dword offset 0_52 */
+#define Z_CNTL			0x014C	/* Dword offset 0_53 */
+#define ALPHA_TST_CNTL		0x0150	/* Dword offset 0_54 */
+#define SECONDARY_STW_EXP	0x0158	/* Dword offset 0_56 */
+#define SECONDARY_S_X_INC	0x015C	/* Dword offset 0_57 */
+#define SECONDARY_S_Y_INC	0x0160	/* Dword offset 0_58 */
+#define SECONDARY_S_START	0x0164	/* Dword offset 0_59 */
+#define SECONDARY_W_X_INC	0x0168	/* Dword offset 0_5A */
+#define SECONDARY_W_Y_INC	0x016C	/* Dword offset 0_5B */
+#define SECONDARY_W_START	0x0170	/* Dword offset 0_5C */
+#define SECONDARY_T_X_INC	0x0174	/* Dword offset 0_5D */
+#define SECONDARY_T_Y_INC	0x0178	/* Dword offset 0_5E */
+#define SECONDARY_T_START	0x017C	/* Dword offset 0_5F */
+
+/* Draw Engine Source Trajectory */
+#define SRC_OFF_PITCH		0x0180	/* Dword offset 0_60 */
+#define SRC_X			0x0184	/* Dword offset 0_61 */
+#define SRC_Y			0x0188	/* Dword offset 0_62 */
+#define SRC_Y_X			0x018C	/* Dword offset 0_63 */
+#define SRC_WIDTH1		0x0190	/* Dword offset 0_64 */
+#define SRC_HEIGHT1		0x0194	/* Dword offset 0_65 */
+#define SRC_HEIGHT1_WIDTH1	0x0198	/* Dword offset 0_66 */
+#define SRC_X_START		0x019C	/* Dword offset 0_67 */
+#define SRC_Y_START		0x01A0	/* Dword offset 0_68 */
+#define SRC_Y_X_START		0x01A4	/* Dword offset 0_69 */
+#define SRC_WIDTH2		0x01A8	/* Dword offset 0_6A */
+#define SRC_HEIGHT2		0x01AC	/* Dword offset 0_6B */
+#define SRC_HEIGHT2_WIDTH2	0x01B0	/* Dword offset 0_6C */
+#define SRC_CNTL		0x01B4	/* Dword offset 0_6D */
+
+#define SCALE_OFF		0x01C0	/* Dword offset 0_70 */
+#define SECONDARY_SCALE_OFF	0x01C4	/* Dword offset 0_71 */
+
+#define TEX_0_OFF		0x01C0	/* Dword offset 0_70 */
+#define TEX_1_OFF		0x01C4	/* Dword offset 0_71 */
+#define TEX_2_OFF		0x01C8	/* Dword offset 0_72 */
+#define TEX_3_OFF		0x01CC	/* Dword offset 0_73 */
+#define TEX_4_OFF		0x01D0	/* Dword offset 0_74 */
+#define TEX_5_OFF		0x01D4	/* Dword offset 0_75 */
+#define TEX_6_OFF		0x01D8	/* Dword offset 0_76 */
+#define TEX_7_OFF		0x01DC	/* Dword offset 0_77 */
+
+#define SCALE_WIDTH		0x01DC	/* Dword offset 0_77 */
+#define SCALE_HEIGHT		0x01E0	/* Dword offset 0_78 */
+
+#define TEX_8_OFF		0x01E0	/* Dword offset 0_78 */
+#define TEX_9_OFF		0x01E4	/* Dword offset 0_79 */
+#define TEX_10_OFF		0x01E8	/* Dword offset 0_7A */
+#define S_Y_INC			0x01EC	/* Dword offset 0_7B */
+
+#define SCALE_PITCH		0x01EC	/* Dword offset 0_7B */
+#define SCALE_X_INC		0x01F0	/* Dword offset 0_7C */
+
+#define RED_X_INC		0x01F0	/* Dword offset 0_7C */
+#define GREEN_X_INC		0x01F4	/* Dword offset 0_7D */
+
+#define SCALE_Y_INC		0x01F4	/* Dword offset 0_7D */
+#define SCALE_VACC		0x01F8	/* Dword offset 0_7E */
+#define SCALE_3D_CNTL		0x01FC	/* Dword offset 0_7F */
+
+/* Host Data */
+#define HOST_DATA0		0x0200	/* Dword offset 0_80 */
+#define HOST_DATA1		0x0204	/* Dword offset 0_81 */
+#define HOST_DATA2		0x0208	/* Dword offset 0_82 */
+#define HOST_DATA3		0x020C	/* Dword offset 0_83 */
+#define HOST_DATA4		0x0210	/* Dword offset 0_84 */
+#define HOST_DATA5		0x0214	/* Dword offset 0_85 */
+#define HOST_DATA6		0x0218	/* Dword offset 0_86 */
+#define HOST_DATA7		0x021C	/* Dword offset 0_87 */
+#define HOST_DATA8		0x0220	/* Dword offset 0_88 */
+#define HOST_DATA9		0x0224	/* Dword offset 0_89 */
+#define HOST_DATAA		0x0228	/* Dword offset 0_8A */
+#define HOST_DATAB		0x022C	/* Dword offset 0_8B */
+#define HOST_DATAC		0x0230	/* Dword offset 0_8C */
+#define HOST_DATAD		0x0234	/* Dword offset 0_8D */
+#define HOST_DATAE		0x0238	/* Dword offset 0_8E */
+#define HOST_DATAF		0x023C	/* Dword offset 0_8F */
+#define HOST_CNTL		0x0240	/* Dword offset 0_90 */
+
+/* GUI Bus Mastering */
+#define BM_HOSTDATA		0x0244	/* Dword offset 0_91 */
+#define BM_ADDR			0x0248	/* Dword offset 0_92 */
+#define BM_DATA			0x0248	/* Dword offset 0_92 */
+#define BM_GUI_TABLE_CMD	0x024C	/* Dword offset 0_93 */
+
+/* Pattern */
+#define PAT_REG0		0x0280	/* Dword offset 0_A0 */
+#define PAT_REG1		0x0284	/* Dword offset 0_A1 */
+#define PAT_CNTL		0x0288	/* Dword offset 0_A2 */
+
+/* Scissors */
+#define SC_LEFT			0x02A0	/* Dword offset 0_A8 */
+#define SC_RIGHT		0x02A4	/* Dword offset 0_A9 */
+#define SC_LEFT_RIGHT		0x02A8	/* Dword offset 0_AA */
+#define SC_TOP			0x02AC	/* Dword offset 0_AB */
+#define SC_BOTTOM		0x02B0	/* Dword offset 0_AC */
+#define SC_TOP_BOTTOM		0x02B4	/* Dword offset 0_AD */
+
+/* Data Path */
+#define USR1_DST_OFF_PITCH	0x02B8	/* Dword offset 0_AE */
+#define USR2_DST_OFF_PITCH	0x02BC	/* Dword offset 0_AF */
+#define DP_BKGD_CLR		0x02C0	/* Dword offset 0_B0 */
+#define DP_FOG_CLR		0x02C4	/* Dword offset 0_B1 */
+#define DP_FRGD_CLR		0x02C4	/* Dword offset 0_B1 */
+#define DP_WRITE_MASK		0x02C8	/* Dword offset 0_B2 */
+#define DP_CHAIN_MASK		0x02CC	/* Dword offset 0_B3 */
+#define DP_PIX_WIDTH		0x02D0	/* Dword offset 0_B4 */
+#define DP_MIX			0x02D4	/* Dword offset 0_B5 */
+#define DP_SRC			0x02D8	/* Dword offset 0_B6 */
+#define DP_FRGD_CLR_MIX		0x02DC	/* Dword offset 0_B7 */
+#define DP_FRGD_BKGD_CLR	0x02E0	/* Dword offset 0_B8 */
+
+/* Draw Engine Destination Trajectory */
+#define DST_X_Y			0x02E8	/* Dword offset 0_BA */
+#define DST_WIDTH_HEIGHT	0x02EC	/* Dword offset 0_BB */
+
+/* Data Path */
+#define USR_DST_PICTH		0x02F0	/* Dword offset 0_BC */
+#define DP_SET_GUI_ENGINE2	0x02F8	/* Dword offset 0_BE */
+#define DP_SET_GUI_ENGINE	0x02FC	/* Dword offset 0_BF */
+
+/* Color Compare */
+#define CLR_CMP_CLR		0x0300	/* Dword offset 0_C0 */
+#define CLR_CMP_MASK		0x0304	/* Dword offset 0_C1 */
+#define CLR_CMP_CNTL		0x0308	/* Dword offset 0_C2 */
+
+/* Command FIFO */
+#define FIFO_STAT		0x0310	/* Dword offset 0_C4 */
+
+#define CONTEXT_MASK		0x0320	/* Dword offset 0_C8 */
+#define CONTEXT_LOAD_CNTL	0x032C	/* Dword offset 0_CB */
+
+/* Engine Control */
+#define GUI_TRAJ_CNTL		0x0330	/* Dword offset 0_CC */
+
+/* Engine Status/FIFO */
+#define GUI_STAT		0x0338	/* Dword offset 0_CE */
+
+#define TEX_PALETTE_INDEX	0x0340	/* Dword offset 0_D0 */
+#define STW_EXP			0x0344	/* Dword offset 0_D1 */
+#define LOG_MAX_INC		0x0348	/* Dword offset 0_D2 */
+#define S_X_INC			0x034C	/* Dword offset 0_D3 */
+#define S_Y_INC__ALIAS__	0x0350	/* Dword offset 0_D4 */
+
+#define SCALE_PITCH__ALIAS__	0x0350	/* Dword offset 0_D4 */
+
+#define S_START			0x0354	/* Dword offset 0_D5 */
+#define W_X_INC			0x0358	/* Dword offset 0_D6 */
+#define W_Y_INC			0x035C	/* Dword offset 0_D7 */
+#define W_START			0x0360	/* Dword offset 0_D8 */
+#define T_X_INC			0x0364	/* Dword offset 0_D9 */
+#define T_Y_INC			0x0368	/* Dword offset 0_DA */
+
+#define SECONDARY_SCALE_PITCH	0x0368	/* Dword offset 0_DA */
+
+#define T_START			0x036C	/* Dword offset 0_DB */
+#define TEX_SIZE_PITCH		0x0370	/* Dword offset 0_DC */
+#define TEX_CNTL		0x0374	/* Dword offset 0_DD */
+#define SECONDARY_TEX_OFFSET	0x0378	/* Dword offset 0_DE */
+#define TEX_PALETTE		0x037C	/* Dword offset 0_DF */
+
+#define SCALE_PITCH_BOTH	0x0380	/* Dword offset 0_E0 */
+#define SECONDARY_SCALE_OFF_ACC	0x0384	/* Dword offset 0_E1 */
+#define SCALE_OFF_ACC		0x0388	/* Dword offset 0_E2 */
+#define SCALE_DST_Y_X		0x038C	/* Dword offset 0_E3 */
+
+/* Draw Engine Destination Trajectory */
+#define COMPOSITE_SHADOW_ID	0x0398	/* Dword offset 0_E6 */
+
+#define SECONDARY_SCALE_X_INC	0x039C	/* Dword offset 0_E7 */
+
+#define SPECULAR_RED_X_INC	0x039C	/* Dword offset 0_E7 */
+#define SPECULAR_RED_Y_INC	0x03A0	/* Dword offset 0_E8 */
+#define SPECULAR_RED_START	0x03A4	/* Dword offset 0_E9 */
+
+#define SECONDARY_SCALE_HACC	0x03A4	/* Dword offset 0_E9 */
+
+#define SPECULAR_GREEN_X_INC	0x03A8	/* Dword offset 0_EA */
+#define SPECULAR_GREEN_Y_INC	0x03AC	/* Dword offset 0_EB */
+#define SPECULAR_GREEN_START	0x03B0	/* Dword offset 0_EC */
+#define SPECULAR_BLUE_X_INC	0x03B4	/* Dword offset 0_ED */
+#define SPECULAR_BLUE_Y_INC	0x03B8	/* Dword offset 0_EE */
+#define SPECULAR_BLUE_START	0x03BC	/* Dword offset 0_EF */
+
+#define SCALE_X_INC__ALIAS__	0x03C0	/* Dword offset 0_F0 */
+
+#define RED_X_INC__ALIAS__	0x03C0	/* Dword offset 0_F0 */
+#define RED_Y_INC		0x03C4	/* Dword offset 0_F1 */
+#define RED_START		0x03C8	/* Dword offset 0_F2 */
+
+#define SCALE_HACC		0x03C8	/* Dword offset 0_F2 */
+#define SCALE_Y_INC__ALIAS__	0x03CC	/* Dword offset 0_F3 */
+
+#define GREEN_X_INC__ALIAS__	0x03CC	/* Dword offset 0_F3 */
+#define GREEN_Y_INC		0x03D0	/* Dword offset 0_F4 */
+
+#define SECONDARY_SCALE_Y_INC	0x03D0	/* Dword offset 0_F4 */
+#define SECONDARY_SCALE_VACC	0x03D4	/* Dword offset 0_F5 */
+
+#define GREEN_START		0x03D4	/* Dword offset 0_F5 */
+#define BLUE_X_INC		0x03D8	/* Dword offset 0_F6 */
+#define BLUE_Y_INC		0x03DC	/* Dword offset 0_F7 */
+#define BLUE_START		0x03E0	/* Dword offset 0_F8 */
+#define Z_X_INC			0x03E4	/* Dword offset 0_F9 */
+#define Z_Y_INC			0x03E8	/* Dword offset 0_FA */
+#define Z_START			0x03EC	/* Dword offset 0_FB */
+#define ALPHA_X_INC		0x03F0	/* Dword offset 0_FC */
+#define FOG_X_INC		0x03F0	/* Dword offset 0_FC */
+#define ALPHA_Y_INC		0x03F4	/* Dword offset 0_FD */
+#define FOG_Y_INC		0x03F4	/* Dword offset 0_FD */
+#define ALPHA_START		0x03F8	/* Dword offset 0_FE */
+#define FOG_START		0x03F8	/* Dword offset 0_FE */
+
+#define OVERLAY_Y_X_START		0x0400	/* Dword offset 1_00 */
+#define OVERLAY_Y_X_END			0x0404	/* Dword offset 1_01 */
+#define OVERLAY_VIDEO_KEY_CLR		0x0408	/* Dword offset 1_02 */
+#define OVERLAY_VIDEO_KEY_MSK		0x040C	/* Dword offset 1_03 */
+#define OVERLAY_GRAPHICS_KEY_CLR	0x0410	/* Dword offset 1_04 */
+#define OVERLAY_GRAPHICS_KEY_MSK	0x0414	/* Dword offset 1_05 */
+#define OVERLAY_KEY_CNTL		0x0418	/* Dword offset 1_06 */
+
+#define OVERLAY_SCALE_INC	0x0420	/* Dword offset 1_08 */
+#define OVERLAY_SCALE_CNTL	0x0424	/* Dword offset 1_09 */
+#define SCALER_HEIGHT_WIDTH	0x0428	/* Dword offset 1_0A */
+#define SCALER_TEST		0x042C	/* Dword offset 1_0B */
+#define SCALER_BUF0_OFFSET	0x0434	/* Dword offset 1_0D */
+#define SCALER_BUF1_OFFSET	0x0438	/* Dword offset 1_0E */
+#define SCALE_BUF_PITCH		0x043C	/* Dword offset 1_0F */
+
+#define CAPTURE_START_END	0x0440	/* Dword offset 1_10 */
+#define CAPTURE_X_WIDTH		0x0444	/* Dword offset 1_11 */
+#define VIDEO_FORMAT		0x0448	/* Dword offset 1_12 */
+#define VBI_START_END		0x044C	/* Dword offset 1_13 */
+#define CAPTURE_CONFIG		0x0450	/* Dword offset 1_14 */
+#define TRIG_CNTL		0x0454	/* Dword offset 1_15 */
+
+#define OVERLAY_EXCLUSIVE_HORZ	0x0458	/* Dword offset 1_16 */
+#define OVERLAY_EXCLUSIVE_VERT	0x045C	/* Dword offset 1_17 */
+
+#define VAL_WIDTH		0x0460	/* Dword offset 1_18 */
+#define CAPTURE_DEBUG		0x0464	/* Dword offset 1_19 */
+#define VIDEO_SYNC_TEST		0x0468	/* Dword offset 1_1A */
+
+/* GenLocking */
+#define SNAPSHOT_VH_COUNTS	0x0470	/* Dword offset 1_1C */
+#define SNAPSHOT_F_COUNT	0x0474	/* Dword offset 1_1D */
+#define N_VIF_COUNT		0x0478	/* Dword offset 1_1E */
+#define SNAPSHOT_VIF_COUNT	0x047C	/* Dword offset 1_1F */
+
+#define CAPTURE_BUF0_OFFSET	0x0480	/* Dword offset 1_20 */
+#define CAPTURE_BUF1_OFFSET	0x0484	/* Dword offset 1_21 */
+#define CAPTURE_BUF_PITCH	0x0488	/* Dword offset 1_22 */
+
+/* GenLocking */
+#define SNAPSHOT2_VH_COUNTS	0x04B0	/* Dword offset 1_2C */
+#define SNAPSHOT2_F_COUNT	0x04B4	/* Dword offset 1_2D */
+#define N_VIF2_COUNT		0x04B8	/* Dword offset 1_2E */
+#define SNAPSHOT2_VIF_COUNT	0x04BC	/* Dword offset 1_2F */
+
+#define MPP_CONFIG		0x04C0	/* Dword offset 1_30 */
+#define MPP_STROBE_SEQ		0x04C4	/* Dword offset 1_31 */
+#define MPP_ADDR		0x04C8	/* Dword offset 1_32 */
+#define MPP_DATA		0x04CC	/* Dword offset 1_33 */
+#define TVO_CNTL		0x0500	/* Dword offset 1_40 */
+
+/* Test and Debug */
+#define CRT_HORZ_VERT_LOAD	0x0544	/* Dword offset 1_51 */
+
+/* AGP */
+#define AGP_BASE		0x0548	/* Dword offset 1_52 */
+#define AGP_CNTL		0x054C	/* Dword offset 1_53 */
+
+#define SCALER_COLOUR_CNTL	0x0550	/* Dword offset 1_54 */
+#define SCALER_H_COEFF0		0x0554	/* Dword offset 1_55 */
+#define SCALER_H_COEFF1		0x0558	/* Dword offset 1_56 */
+#define SCALER_H_COEFF2		0x055C	/* Dword offset 1_57 */
+#define SCALER_H_COEFF3		0x0560	/* Dword offset 1_58 */
+#define SCALER_H_COEFF4		0x0564	/* Dword offset 1_59 */
+
+/* Command FIFO */
+#define GUI_CMDFIFO_DEBUG	0x0570	/* Dword offset 1_5C */
+#define GUI_CMDFIFO_DATA	0x0574	/* Dword offset 1_5D */
+#define GUI_CNTL		0x0578	/* Dword offset 1_5E */
+
+/* Bus Mastering */
+#define BM_FRAME_BUF_OFFSET	0x0580	/* Dword offset 1_60 */
+#define BM_SYSTEM_MEM_ADDR	0x0584	/* Dword offset 1_61 */
+#define BM_COMMAND		0x0588	/* Dword offset 1_62 */
+#define BM_STATUS		0x058C	/* Dword offset 1_63 */
+#define BM_GUI_TABLE		0x05B8	/* Dword offset 1_6E */
+#define BM_SYSTEM_TABLE		0x05BC	/* Dword offset 1_6F */
+
+#define SCALER_BUF0_OFFSET_U	0x05D4	/* Dword offset 1_75 */
+#define SCALER_BUF0_OFFSET_V	0x05D8	/* Dword offset 1_76 */
+#define SCALER_BUF1_OFFSET_U	0x05DC	/* Dword offset 1_77 */
+#define SCALER_BUF1_OFFSET_V	0x05E0	/* Dword offset 1_78 */
+
+/* Setup Engine */
+#define VERTEX_1_S		0x0640	/* Dword offset 1_90 */
+#define VERTEX_1_T		0x0644	/* Dword offset 1_91 */
+#define VERTEX_1_W		0x0648	/* Dword offset 1_92 */
+#define VERTEX_1_SPEC_ARGB	0x064C	/* Dword offset 1_93 */
+#define VERTEX_1_Z		0x0650	/* Dword offset 1_94 */
+#define VERTEX_1_ARGB		0x0654	/* Dword offset 1_95 */
+#define VERTEX_1_X_Y		0x0658	/* Dword offset 1_96 */
+#define ONE_OVER_AREA		0x065C	/* Dword offset 1_97 */
+#define VERTEX_2_S		0x0660	/* Dword offset 1_98 */
+#define VERTEX_2_T		0x0664	/* Dword offset 1_99 */
+#define VERTEX_2_W		0x0668	/* Dword offset 1_9A */
+#define VERTEX_2_SPEC_ARGB	0x066C	/* Dword offset 1_9B */
+#define VERTEX_2_Z		0x0670	/* Dword offset 1_9C */
+#define VERTEX_2_ARGB		0x0674	/* Dword offset 1_9D */
+#define VERTEX_2_X_Y		0x0678	/* Dword offset 1_9E */
+#define ONE_OVER_AREA		0x065C	/* Dword offset 1_9F */
+#define VERTEX_3_S		0x0680	/* Dword offset 1_A0 */
+#define VERTEX_3_T		0x0684	/* Dword offset 1_A1 */
+#define VERTEX_3_W		0x0688	/* Dword offset 1_A2 */
+#define VERTEX_3_SPEC_ARGB	0x068C	/* Dword offset 1_A3 */
+#define VERTEX_3_Z		0x0690	/* Dword offset 1_A4 */
+#define VERTEX_3_ARGB		0x0694	/* Dword offset 1_A5 */
+#define VERTEX_3_X_Y		0x0698	/* Dword offset 1_A6 */
+#define ONE_OVER_AREA		0x065C	/* Dword offset 1_A7 */
+#define VERTEX_1_S		0x0640	/* Dword offset 1_AB */
+#define VERTEX_1_T		0x0644	/* Dword offset 1_AC */
+#define VERTEX_1_W		0x0648	/* Dword offset 1_AD */
+#define VERTEX_2_S		0x0660	/* Dword offset 1_AE */
+#define VERTEX_2_T		0x0664	/* Dword offset 1_AF */
+#define VERTEX_2_W		0x0668	/* Dword offset 1_B0 */
+#define VERTEX_3_SECONDARY_S	0x06C0	/* Dword offset 1_B0 */
+#define VERTEX_3_S		0x0680	/* Dword offset 1_B1 */
+#define VERTEX_3_SECONDARY_T	0x06C4	/* Dword offset 1_B1 */
+#define VERTEX_3_T		0x0684	/* Dword offset 1_B2 */
+#define VERTEX_3_SECONDARY_W	0x06C8	/* Dword offset 1_B2 */
+#define VERTEX_3_W		0x0688	/* Dword offset 1_B3 */
+#define VERTEX_1_SPEC_ARGB	0x064C	/* Dword offset 1_B4 */
+#define VERTEX_2_SPEC_ARGB	0x066C	/* Dword offset 1_B5 */
+#define VERTEX_3_SPEC_ARGB	0x068C	/* Dword offset 1_B6 */
+#define VERTEX_1_Z		0x0650	/* Dword offset 1_B7 */
+#define VERTEX_2_Z		0x0670	/* Dword offset 1_B8 */
+#define VERTEX_3_Z		0x0690	/* Dword offset 1_B9 */
+#define VERTEX_1_ARGB		0x0654	/* Dword offset 1_BA */
+#define VERTEX_2_ARGB		0x0674	/* Dword offset 1_BB */
+#define VERTEX_3_ARGB		0x0694	/* Dword offset 1_BC */
+#define VERTEX_1_X_Y		0x0658	/* Dword offset 1_BD */
+#define VERTEX_2_X_Y		0x0678	/* Dword offset 1_BE */
+#define VERTEX_3_X_Y		0x0698	/* Dword offset 1_BF */
+#define ONE_OVER_AREA_UC	0x0700	/* Dword offset 1_C0 */
+#define SETUP_CNTL		0x0704	/* Dword offset 1_C1 */
+#define VERTEX_1_SECONDARY_S	0x0728	/* Dword offset 1_CA */
+#define VERTEX_1_SECONDARY_T	0x072C	/* Dword offset 1_CB */
+#define VERTEX_1_SECONDARY_W	0x0730	/* Dword offset 1_CC */
+#define VERTEX_2_SECONDARY_S	0x0734	/* Dword offset 1_CD */
+#define VERTEX_2_SECONDARY_T	0x0738	/* Dword offset 1_CE */
+#define VERTEX_2_SECONDARY_W	0x073C	/* Dword offset 1_CF */
+
+
+#define GTC_3D_RESET_DELAY	3	/* 3D engine reset delay in ms */
+
+/* CRTC control values (mostly CRTC_GEN_CNTL) */
+
+#define CRTC_H_SYNC_NEG		0x00200000
+#define CRTC_V_SYNC_NEG		0x00200000
+
+#define CRTC_DBL_SCAN_EN	0x00000001
+#define CRTC_INTERLACE_EN	0x00000002
+#define CRTC_HSYNC_DIS		0x00000004
+#define CRTC_VSYNC_DIS		0x00000008
+#define CRTC_CSYNC_EN		0x00000010
+#define CRTC_PIX_BY_2_EN	0x00000020	/* unused on RAGE */
+#define CRTC_DISPLAY_DIS	0x00000040
+#define CRTC_VGA_XOVERSCAN	0x00000080
+
+#define CRTC_PIX_WIDTH_MASK	0x00000700
+#define CRTC_PIX_WIDTH_4BPP	0x00000100
+#define CRTC_PIX_WIDTH_8BPP	0x00000200
+#define CRTC_PIX_WIDTH_15BPP	0x00000300
+#define CRTC_PIX_WIDTH_16BPP	0x00000400
+#define CRTC_PIX_WIDTH_24BPP	0x00000500
+#define CRTC_PIX_WIDTH_32BPP	0x00000600
+
+#define CRTC_BYTE_PIX_ORDER	0x00000800
+#define CRTC_PIX_ORDER_MSN_LSN	0x00000000
+#define CRTC_PIX_ORDER_LSN_MSN	0x00000800
+
+#define CRTC_VSYNC_INT_EN	0x00001000ul	/* XC/XL */
+#define CRTC_VSYNC_INT		0x00002000ul	/* XC/XL */
+#define CRTC_FIFO_OVERFILL	0x0000c000ul	/* VT/GT */
+#define CRTC2_VSYNC_INT_EN	0x00004000ul	/* XC/XL */
+#define CRTC2_VSYNC_INT		0x00008000ul	/* XC/XL */
+
+#define CRTC_FIFO_LWM		0x000f0000
+#define CRTC_HVSYNC_IO_DRIVE	0x00010000	/* XC/XL */
+#define CRTC2_PIX_WIDTH		0x000e0000	/* LTPro */
+
+#define CRTC_VGA_128KAP_PAGING	0x00100000
+#define CRTC_VFC_SYNC_TRISTATE	0x00200000	/* VTB/GTB/LT */
+#define CRTC2_EN		0x00200000	/* LTPro */
+#define CRTC_LOCK_REGS		0x00400000
+#define CRTC_SYNC_TRISTATE	0x00800000
+
+#define CRTC_EXT_DISP_EN	0x01000000
+#define CRTC_EN			0x02000000
+#define CRTC_DISP_REQ_EN	0x04000000
+#define CRTC_VGA_LINEAR		0x08000000
+#define CRTC_VSYNC_FALL_EDGE	0x10000000
+#define CRTC_VGA_TEXT_132	0x20000000
+#define CRTC_CNT_EN		0x40000000
+#define CRTC_CUR_B_TEST		0x80000000
+
+#define CRTC_CRNT_VLINE		0x07f00000
+
+#define CRTC_PRESERVED_MASK	0x0001f000
+
+#define CRTC_VBLANK		0x00000001
+#define CRTC_VBLANK_INT_EN	0x00000002
+#define CRTC_VBLANK_INT		0x00000004
+#define CRTC_VBLANK_INT_AK	CRTC_VBLANK_INT
+#define CRTC_VLINE_INT_EN	0x00000008
+#define CRTC_VLINE_INT		0x00000010
+#define CRTC_VLINE_INT_AK	CRTC_VLINE_INT
+#define CRTC_VLINE_SYNC		0x00000020
+#define CRTC_FRAME		0x00000040
+#define SNAPSHOT_INT_EN		0x00000080
+#define SNAPSHOT_INT		0x00000100
+#define SNAPSHOT_INT_AK		SNAPSHOT_INT
+#define I2C_INT_EN		0x00000200
+#define I2C_INT			0x00000400
+#define I2C_INT_AK		I2C_INT
+#define CRTC2_VBLANK		0x00000800
+#define CRTC2_VBLANK_INT_EN	0x00001000
+#define CRTC2_VBLANK_INT	0x00002000
+#define CRTC2_VBLANK_INT_AK	CRTC2_VBLANK_INT
+#define CRTC2_VLINE_INT_EN	0x00004000
+#define CRTC2_VLINE_INT		0x00008000
+#define CRTC2_VLINE_INT_AK	CRTC2_VLINE_INT
+#define CAPBUF0_INT_EN		0x00010000
+#define CAPBUF0_INT		0x00020000
+#define CAPBUF0_INT_AK		CAPBUF0_INT
+#define CAPBUF1_INT_EN		0x00040000
+#define CAPBUF1_INT		0x00080000
+#define CAPBUF1_INT_AK		CAPBUF1_INT
+#define OVERLAY_EOF_INT_EN	0x00100000
+#define OVERLAY_EOF_INT		0x00200000
+#define OVERLAY_EOF_INT_AK	OVERLAY_EOF_INT
+#define ONESHOT_CAP_INT_EN	0x00400000
+#define ONESHOT_CAP_INT		0x00800000
+#define ONESHOT_CAP_INT_AK	ONESHOT_CAP_INT
+#define BUSMASTER_EOL_INT_EN	0x01000000
+#define BUSMASTER_EOL_INT	0x02000000
+#define BUSMASTER_EOL_INT_AK	BUSMASTER_EOL_INT
+#define GP_INT_EN		0x04000000
+#define GP_INT			0x08000000
+#define GP_INT_AK		GP_INT
+#define CRTC2_VLINE_SYNC	0x10000000
+#define SNAPSHOT2_INT_EN	0x20000000
+#define SNAPSHOT2_INT		0x40000000
+#define SNAPSHOT2_INT_AK	SNAPSHOT2_INT
+#define VBLANK_BIT2_INT		0x80000000
+#define VBLANK_BIT2_INT_AK	VBLANK_BIT2_INT
+
+#define CRTC_INT_EN_MASK	(CRTC_VBLANK_INT_EN |	\
+				 CRTC_VLINE_INT_EN |	\
+				 SNAPSHOT_INT_EN |	\
+				 I2C_INT_EN |		\
+				 CRTC2_VBLANK_INT_EN |	\
+				 CRTC2_VLINE_INT_EN |	\
+				 CAPBUF0_INT_EN |	\
+				 CAPBUF1_INT_EN |	\
+				 OVERLAY_EOF_INT_EN |	\
+				 ONESHOT_CAP_INT_EN |	\
+				 BUSMASTER_EOL_INT_EN |	\
+				 GP_INT_EN |		\
+				 SNAPSHOT2_INT_EN)
+
+/* DAC control values */
+
+#define DAC_EXT_SEL_RS2		0x01
+#define DAC_EXT_SEL_RS3		0x02
+#define DAC_8BIT_EN		0x00000100
+#define DAC_PIX_DLY_MASK	0x00000600
+#define DAC_PIX_DLY_0NS		0x00000000
+#define DAC_PIX_DLY_2NS		0x00000200
+#define DAC_PIX_DLY_4NS		0x00000400
+#define DAC_BLANK_ADJ_MASK	0x00001800
+#define DAC_BLANK_ADJ_0		0x00000000
+#define DAC_BLANK_ADJ_1		0x00000800
+#define DAC_BLANK_ADJ_2		0x00001000
+
+/* DAC control values (my source XL/XC Register reference) */
+#define DAC_OUTPUT_MASK         0x00000001  /* 0 - PAL, 1 - NTSC */
+#define DAC_MISTERY_BIT         0x00000002  /* PS2 ? RS343 ?, EXTRA_BRIGHT for GT */
+#define DAC_BLANKING            0x00000004
+#define DAC_CMP_DISABLE         0x00000008
+#define DAC1_CLK_SEL            0x00000010
+#define PALETTE_ACCESS_CNTL     0x00000020
+#define PALETTE2_SNOOP_EN       0x00000040
+#define DAC_CMP_OUTPUT          0x00000080 /* read only */
+/* #define DAC_8BIT_EN is ok */
+#define CRT_SENSE               0x00000800 /* read only */
+#define CRT_DETECTION_ON        0x00001000
+#define DAC_VGA_ADR_EN          0x00002000
+#define DAC_FEA_CON_EN          0x00004000
+#define DAC_PDWN                0x00008000
+#define DAC_TYPE_MASK           0x00070000 /* read only */
+
+
+
+/* Mix control values */
+
+#define MIX_NOT_DST		0x0000
+#define MIX_0			0x0001
+#define MIX_1			0x0002
+#define MIX_DST			0x0003
+#define MIX_NOT_SRC		0x0004
+#define MIX_XOR			0x0005
+#define MIX_XNOR		0x0006
+#define MIX_SRC			0x0007
+#define MIX_NAND		0x0008
+#define MIX_NOT_SRC_OR_DST	0x0009
+#define MIX_SRC_OR_NOT_DST	0x000a
+#define MIX_OR			0x000b
+#define MIX_AND			0x000c
+#define MIX_SRC_AND_NOT_DST	0x000d
+#define MIX_NOT_SRC_AND_DST	0x000e
+#define MIX_NOR			0x000f
+
+/* Maximum engine dimensions */
+#define ENGINE_MIN_X		0
+#define ENGINE_MIN_Y		0
+#define ENGINE_MAX_X		4095
+#define ENGINE_MAX_Y		16383
+
+/* Mach64 engine bit constants - these are typically ORed together */
+
+/* BUS_CNTL register constants */
+#define BUS_APER_REG_DIS	0x00000010
+#define BUS_FIFO_ERR_ACK	0x00200000
+#define BUS_HOST_ERR_ACK	0x00800000
+
+/* GEN_TEST_CNTL register constants */
+#define GEN_OVR_OUTPUT_EN	0x20
+#define HWCURSOR_ENABLE		0x80
+#define GUI_ENGINE_ENABLE	0x100
+#define BLOCK_WRITE_ENABLE	0x200
+
+/* DSP_CONFIG register constants */
+#define DSP_XCLKS_PER_QW	0x00003fff
+#define DSP_LOOP_LATENCY	0x000f0000
+#define DSP_PRECISION		0x00700000
+
+/* DSP_ON_OFF register constants */
+#define DSP_OFF			0x000007ff
+#define DSP_ON			0x07ff0000
+#define VGA_DSP_OFF		DSP_OFF
+#define VGA_DSP_ON		DSP_ON
+#define VGA_DSP_XCLKS_PER_QW	DSP_XCLKS_PER_QW
+
+/* PLL register indices and fields */
+#define MPLL_CNTL		0x00
+#define PLL_PC_GAIN		0x07
+#define PLL_VC_GAIN		0x18
+#define PLL_DUTY_CYC		0xE0
+#define VPLL_CNTL		0x01
+#define PLL_REF_DIV		0x02
+#define PLL_GEN_CNTL		0x03
+#define PLL_OVERRIDE		0x01	/* PLL_SLEEP */
+#define PLL_MCLK_RST		0x02	/* PLL_MRESET */
+#define OSC_EN			0x04
+#define EXT_CLK_EN		0x08
+#define FORCE_DCLK_TRI_STATE	0x08    /* VT4 -> */
+#define MCLK_SRC_SEL		0x70
+#define EXT_CLK_CNTL		0x80
+#define DLL_PWDN		0x80    /* VT4 -> */
+#define MCLK_FB_DIV		0x04
+#define PLL_VCLK_CNTL		0x05
+#define PLL_VCLK_SRC_SEL	0x03
+#define PLL_VCLK_RST		0x04
+#define PLL_VCLK_INVERT		0x08
+#define VCLK_POST_DIV		0x06
+#define VCLK0_POST		0x03
+#define VCLK1_POST		0x0C
+#define VCLK2_POST		0x30
+#define VCLK3_POST		0xC0
+#define VCLK0_FB_DIV		0x07
+#define VCLK1_FB_DIV		0x08
+#define VCLK2_FB_DIV		0x09
+#define VCLK3_FB_DIV		0x0A
+#define PLL_EXT_CNTL		0x0B
+#define PLL_XCLK_MCLK_RATIO	0x03
+#define PLL_XCLK_SRC_SEL	0x07
+#define PLL_MFB_TIMES_4_2B	0x08
+#define PLL_VCLK0_XDIV		0x10
+#define PLL_VCLK1_XDIV		0x20
+#define PLL_VCLK2_XDIV		0x40
+#define PLL_VCLK3_XDIV		0x80
+#define DLL_CNTL		0x0C
+#define DLL1_CNTL		0x0C
+#define VFC_CNTL		0x0D
+#define PLL_TEST_CNTL		0x0E
+#define PLL_TEST_COUNT		0x0F
+#define LVDS_CNTL0		0x10
+#define LVDS_CNTL1		0x11
+#define AGP1_CNTL		0x12
+#define AGP2_CNTL		0x13
+#define DLL2_CNTL		0x14
+#define SCLK_FB_DIV		0x15
+#define SPLL_CNTL1		0x16
+#define SPLL_CNTL2		0x17
+#define APLL_STRAPS		0x18
+#define EXT_VPLL_CNTL		0x19
+#define EXT_VPLL_EN		0x04
+#define EXT_VPLL_VGA_EN		0x08
+#define EXT_VPLL_INSYNC		0x10
+#define EXT_VPLL_REF_DIV	0x1A
+#define EXT_VPLL_FB_DIV		0x1B
+#define EXT_VPLL_MSB		0x1C
+#define HTOTAL_CNTL		0x1D
+#define BYTE_CLK_CNTL		0x1E
+#define TV_PLL_CNTL1		0x1F
+#define TV_PLL_CNTL2		0x20
+#define TV_PLL_CNTL		0x21
+#define EXT_TV_PLL		0x22
+#define V2PLL_CNTL		0x23
+#define PLL_V2CLK_CNTL		0x24
+#define EXT_V2PLL_REF_DIV	0x25
+#define EXT_V2PLL_FB_DIV	0x26
+#define EXT_V2PLL_MSB		0x27
+#define HTOTAL2_CNTL		0x28
+#define PLL_YCLK_CNTL		0x29
+#define PM_DYN_CLK_CNTL		0x2A
+
+/* CNFG_CNTL register constants */
+#define APERTURE_4M_ENABLE	1
+#define APERTURE_8M_ENABLE	2
+#define VGA_APERTURE_ENABLE	4
+
+/* CNFG_STAT0 register constants (GX, CX) */
+#define CFG_BUS_TYPE		0x00000007
+#define CFG_MEM_TYPE		0x00000038
+#define CFG_INIT_DAC_TYPE	0x00000e00
+
+/* CNFG_STAT0 register constants (CT, ET, VT) */
+#define CFG_MEM_TYPE_xT		0x00000007
+
+#define ISA			0
+#define EISA			1
+#define LOCAL_BUS		6
+#define PCI			7
+
+/* Memory types for GX, CX */
+#define DRAMx4			0
+#define VRAMx16			1
+#define VRAMx16ssr		2
+#define DRAMx16			3
+#define GraphicsDRAMx16		4
+#define EnhancedVRAMx16		5
+#define EnhancedVRAMx16ssr	6
+
+/* Memory types for CT, ET, VT, GT */
+#define DRAM			1
+#define EDO			2
+#define PSEUDO_EDO		3
+#define SDRAM			4
+#define SGRAM			5
+#define WRAM			6
+#define SDRAM32			6
+
+#define DAC_INTERNAL		0x00
+#define DAC_IBMRGB514		0x01
+#define DAC_ATI68875		0x02
+#define DAC_TVP3026_A		0x72
+#define DAC_BT476		0x03
+#define DAC_BT481		0x04
+#define DAC_ATT20C491		0x14
+#define DAC_SC15026		0x24
+#define DAC_MU9C1880		0x34
+#define DAC_IMSG174		0x44
+#define DAC_ATI68860_B		0x05
+#define DAC_ATI68860_C		0x15
+#define DAC_TVP3026_B		0x75
+#define DAC_STG1700		0x06
+#define DAC_ATT498		0x16
+#define DAC_STG1702		0x07
+#define DAC_SC15021		0x17
+#define DAC_ATT21C498		0x27
+#define DAC_STG1703		0x37
+#define DAC_CH8398		0x47
+#define DAC_ATT20C408		0x57
+
+#define CLK_ATI18818_0		0
+#define CLK_ATI18818_1		1
+#define CLK_STG1703		2
+#define CLK_CH8398		3
+#define CLK_INTERNAL		4
+#define CLK_ATT20C408		5
+#define CLK_IBMRGB514		6
+
+/* MEM_CNTL register constants */
+#define MEM_SIZE_ALIAS		0x00000007
+#define MEM_SIZE_512K		0x00000000
+#define MEM_SIZE_1M		0x00000001
+#define MEM_SIZE_2M		0x00000002
+#define MEM_SIZE_4M		0x00000003
+#define MEM_SIZE_6M		0x00000004
+#define MEM_SIZE_8M		0x00000005
+#define MEM_SIZE_ALIAS_GTB	0x0000000F
+#define MEM_SIZE_2M_GTB		0x00000003
+#define MEM_SIZE_4M_GTB		0x00000007
+#define MEM_SIZE_6M_GTB		0x00000009
+#define MEM_SIZE_8M_GTB		0x0000000B
+#define MEM_BNDRY		0x00030000
+#define MEM_BNDRY_0K		0x00000000
+#define MEM_BNDRY_256K		0x00010000
+#define MEM_BNDRY_512K		0x00020000
+#define MEM_BNDRY_1M		0x00030000
+#define MEM_BNDRY_EN		0x00040000
+
+#define ONE_MB			0x100000
+/* ATI PCI constants */
+#define PCI_ATI_VENDOR_ID	0x1002
+
+
+/* CNFG_CHIP_ID register constants */
+#define CFG_CHIP_TYPE		0x0000FFFF
+#define CFG_CHIP_CLASS		0x00FF0000
+#define CFG_CHIP_REV		0xFF000000
+#define CFG_CHIP_MAJOR		0x07000000
+#define CFG_CHIP_FND_ID		0x38000000
+#define CFG_CHIP_MINOR		0xC0000000
+
+
+/* Chip IDs read from CNFG_CHIP_ID */
+
+/* mach64GX family */
+#define GX_CHIP_ID	0xD7	/* mach64GX (ATI888GX00) */
+#define CX_CHIP_ID	0x57	/* mach64CX (ATI888CX00) */
+
+#define GX_PCI_ID	0x4758	/* mach64GX (ATI888GX00) */
+#define CX_PCI_ID	0x4358	/* mach64CX (ATI888CX00) */
+
+/* mach64CT family */
+#define CT_CHIP_ID	0x4354	/* mach64CT (ATI264CT) */
+#define ET_CHIP_ID	0x4554	/* mach64ET (ATI264ET) */
+
+/* mach64CT family / mach64VT class */
+#define VT_CHIP_ID	0x5654	/* mach64VT (ATI264VT) */
+#define VU_CHIP_ID	0x5655	/* mach64VTB (ATI264VTB) */
+#define VV_CHIP_ID	0x5656	/* mach64VT4 (ATI264VT4) */
+
+/* mach64CT family / mach64GT (3D RAGE) class */
+#define LB_CHIP_ID	0x4c42	/* RAGE LT PRO, AGP */
+#define LD_CHIP_ID	0x4c44	/* RAGE LT PRO */
+#define LG_CHIP_ID	0x4c47	/* RAGE LT */
+#define LI_CHIP_ID	0x4c49	/* RAGE LT PRO */
+#define LP_CHIP_ID	0x4c50	/* RAGE LT PRO */
+#define LT_CHIP_ID	0x4c54	/* RAGE LT */
+
+/* mach64CT family / (Rage XL) class */
+#define GR_CHIP_ID	0x4752	/* RAGE XL, BGA, PCI33 */
+#define GS_CHIP_ID	0x4753	/* RAGE XL, PQFP, PCI33 */
+#define GM_CHIP_ID	0x474d	/* RAGE XL, BGA, AGP 1x,2x */
+#define GN_CHIP_ID	0x474e	/* RAGE XL, PQFP,AGP 1x,2x */
+#define GO_CHIP_ID	0x474f	/* RAGE XL, BGA, PCI66 */
+#define GL_CHIP_ID	0x474c	/* RAGE XL, PQFP, PCI66 */
+
+#define IS_XL(id) ((id)==GR_CHIP_ID || (id)==GS_CHIP_ID || \
+		   (id)==GM_CHIP_ID || (id)==GN_CHIP_ID || \
+		   (id)==GO_CHIP_ID || (id)==GL_CHIP_ID)
+
+#define GT_CHIP_ID	0x4754	/* RAGE (GT) */
+#define GU_CHIP_ID	0x4755	/* RAGE II/II+ (GTB) */
+#define GV_CHIP_ID	0x4756	/* RAGE IIC, PCI */
+#define GW_CHIP_ID	0x4757	/* RAGE IIC, AGP */
+#define GZ_CHIP_ID	0x475a	/* RAGE IIC, AGP */
+#define GB_CHIP_ID	0x4742	/* RAGE PRO, BGA, AGP 1x and 2x */
+#define GD_CHIP_ID	0x4744	/* RAGE PRO, BGA, AGP 1x only */
+#define GI_CHIP_ID	0x4749	/* RAGE PRO, BGA, PCI33 only */
+#define GP_CHIP_ID	0x4750	/* RAGE PRO, PQFP, PCI33, full 3D */
+#define GQ_CHIP_ID	0x4751	/* RAGE PRO, PQFP, PCI33, limited 3D */
+
+#define LM_CHIP_ID	0x4c4d	/* RAGE Mobility AGP, full function */
+#define LN_CHIP_ID	0x4c4e	/* RAGE Mobility AGP */
+#define LR_CHIP_ID	0x4c52	/* RAGE Mobility PCI, full function */
+#define LS_CHIP_ID	0x4c53	/* RAGE Mobility PCI */
+
+#define IS_MOBILITY(id) ((id)==LM_CHIP_ID || (id)==LN_CHIP_ID || \
+			(id)==LR_CHIP_ID || (id)==LS_CHIP_ID)
+/* Mach64 major ASIC revisions */
+#define MACH64_ASIC_NEC_VT_A3		0x08
+#define MACH64_ASIC_NEC_VT_A4		0x48
+#define MACH64_ASIC_SGS_VT_A4		0x40
+#define MACH64_ASIC_SGS_VT_B1S1		0x01
+#define MACH64_ASIC_SGS_GT_B1S1		0x01
+#define MACH64_ASIC_SGS_GT_B1S2		0x41
+#define MACH64_ASIC_UMC_GT_B2U1		0x1a
+#define MACH64_ASIC_UMC_GT_B2U2		0x5a
+#define MACH64_ASIC_UMC_VT_B2U3		0x9a
+#define MACH64_ASIC_UMC_GT_B2U3		0x9a
+#define MACH64_ASIC_UMC_R3B_D_P_A1	0x1b
+#define MACH64_ASIC_UMC_R3B_D_P_A2	0x5b
+#define MACH64_ASIC_UMC_R3B_D_P_A3	0x1c
+#define MACH64_ASIC_UMC_R3B_D_P_A4	0x5c
+
+/* Mach64 foundries */
+#define MACH64_FND_SGS		0
+#define MACH64_FND_NEC		1
+#define MACH64_FND_UMC		3
+
+/* Mach64 chip types */
+#define MACH64_UNKNOWN		0
+#define MACH64_GX		1
+#define MACH64_CX		2
+#define MACH64_CT		3Restore
+#define MACH64_ET		4
+#define MACH64_VT		5
+#define MACH64_GT		6
+
+/* DST_CNTL register constants */
+#define DST_X_RIGHT_TO_LEFT	0
+#define DST_X_LEFT_TO_RIGHT	1
+#define DST_Y_BOTTOM_TO_TOP	0
+#define DST_Y_TOP_TO_BOTTOM	2
+#define DST_X_MAJOR		0
+#define DST_Y_MAJOR		4
+#define DST_X_TILE		8
+#define DST_Y_TILE		0x10
+#define DST_LAST_PEL		0x20
+#define DST_POLYGON_ENABLE	0x40
+#define DST_24_ROTATION_ENABLE	0x80
+
+/* SRC_CNTL register constants */
+#define SRC_PATTERN_ENABLE		1
+#define SRC_ROTATION_ENABLE		2
+#define SRC_LINEAR_ENABLE		4
+#define SRC_BYTE_ALIGN			8
+#define SRC_LINE_X_RIGHT_TO_LEFT	0
+#define SRC_LINE_X_LEFT_TO_RIGHT	0x10
+
+/* HOST_CNTL register constants */
+#define HOST_BYTE_ALIGN		1
+
+/* GUI_TRAJ_CNTL register constants */
+#define PAT_MONO_8x8_ENABLE	0x01000000
+#define PAT_CLR_4x2_ENABLE	0x02000000
+#define PAT_CLR_8x1_ENABLE	0x04000000
+
+/* DP_CHAIN_MASK register constants */
+#define DP_CHAIN_4BPP		0x8888
+#define DP_CHAIN_7BPP		0xD2D2
+#define DP_CHAIN_8BPP		0x8080
+#define DP_CHAIN_8BPP_RGB	0x9292
+#define DP_CHAIN_15BPP		0x4210
+#define DP_CHAIN_16BPP		0x8410
+#define DP_CHAIN_24BPP		0x8080
+#define DP_CHAIN_32BPP		0x8080
+
+/* DP_PIX_WIDTH register constants */
+#define DST_1BPP		0x0
+#define DST_4BPP		0x1
+#define DST_8BPP		0x2
+#define DST_15BPP		0x3
+#define DST_16BPP		0x4
+#define DST_24BPP		0x5
+#define DST_32BPP		0x6
+#define DST_MASK		0xF
+#define SRC_1BPP		0x000
+#define SRC_4BPP		0x100
+#define SRC_8BPP		0x200
+#define SRC_15BPP		0x300
+#define SRC_16BPP		0x400
+#define SRC_24BPP		0x500
+#define SRC_32BPP		0x600
+#define SRC_MASK		0xF00
+#define DP_HOST_TRIPLE_EN	0x2000
+#define HOST_1BPP		0x00000
+#define HOST_4BPP		0x10000
+#define HOST_8BPP		0x20000
+#define HOST_15BPP		0x30000
+#define HOST_16BPP		0x40000
+#define HOST_24BPP		0x50000
+#define HOST_32BPP		0x60000
+#define HOST_MASK		0xF0000
+#define BYTE_ORDER_MSB_TO_LSB	0
+#define BYTE_ORDER_LSB_TO_MSB	0x1000000
+#define BYTE_ORDER_MASK		0x1000000
+
+/* DP_MIX register constants */
+#define BKGD_MIX_NOT_D			0
+#define BKGD_MIX_ZERO			1
+#define BKGD_MIX_ONE			2
+#define BKGD_MIX_D			3
+#define BKGD_MIX_NOT_S			4
+#define BKGD_MIX_D_XOR_S		5
+#define BKGD_MIX_NOT_D_XOR_S		6
+#define BKGD_MIX_S			7
+#define BKGD_MIX_NOT_D_OR_NOT_S		8
+#define BKGD_MIX_D_OR_NOT_S		9
+#define BKGD_MIX_NOT_D_OR_S		10
+#define BKGD_MIX_D_OR_S			11
+#define BKGD_MIX_D_AND_S		12
+#define BKGD_MIX_NOT_D_AND_S		13
+#define BKGD_MIX_D_AND_NOT_S		14
+#define BKGD_MIX_NOT_D_AND_NOT_S	15
+#define BKGD_MIX_D_PLUS_S_DIV2		0x17
+#define FRGD_MIX_NOT_D			0
+#define FRGD_MIX_ZERO			0x10000
+#define FRGD_MIX_ONE			0x20000
+#define FRGD_MIX_D			0x30000
+#define FRGD_MIX_NOT_S			0x40000
+#define FRGD_MIX_D_XOR_S		0x50000
+#define FRGD_MIX_NOT_D_XOR_S		0x60000
+#define FRGD_MIX_S			0x70000
+#define FRGD_MIX_NOT_D_OR_NOT_S		0x80000
+#define FRGD_MIX_D_OR_NOT_S		0x90000
+#define FRGD_MIX_NOT_D_OR_S		0xa0000
+#define FRGD_MIX_D_OR_S			0xb0000
+#define FRGD_MIX_D_AND_S		0xc0000
+#define FRGD_MIX_NOT_D_AND_S		0xd0000
+#define FRGD_MIX_D_AND_NOT_S		0xe0000
+#define FRGD_MIX_NOT_D_AND_NOT_S	0xf0000
+#define FRGD_MIX_D_PLUS_S_DIV2		0x170000
+
+/* DP_SRC register constants */
+#define BKGD_SRC_BKGD_CLR	0
+#define BKGD_SRC_FRGD_CLR	1
+#define BKGD_SRC_HOST		2
+#define BKGD_SRC_BLIT		3
+#define BKGD_SRC_PATTERN	4
+#define FRGD_SRC_BKGD_CLR	0
+#define FRGD_SRC_FRGD_CLR	0x100
+#define FRGD_SRC_HOST		0x200
+#define FRGD_SRC_BLIT		0x300
+#define FRGD_SRC_PATTERN	0x400
+#define MONO_SRC_ONE		0
+#define MONO_SRC_PATTERN	0x10000
+#define MONO_SRC_HOST		0x20000
+#define MONO_SRC_BLIT		0x30000
+
+/* CLR_CMP_CNTL register constants */
+#define COMPARE_FALSE		0
+#define COMPARE_TRUE		1
+#define COMPARE_NOT_EQUAL	4
+#define COMPARE_EQUAL		5
+#define COMPARE_DESTINATION	0
+#define COMPARE_SOURCE		0x1000000
+
+/* FIFO_STAT register constants */
+#define FIFO_ERR		0x80000000
+
+/* CONTEXT_LOAD_CNTL constants */
+#define CONTEXT_NO_LOAD			0
+#define CONTEXT_LOAD			0x10000
+#define CONTEXT_LOAD_AND_DO_FILL	0x20000
+#define CONTEXT_LOAD_AND_DO_LINE	0x30000
+#define CONTEXT_EXECUTE			0
+#define CONTEXT_CMD_DISABLE		0x80000000
+
+/* GUI_STAT register constants */
+#define ENGINE_IDLE			0
+#define ENGINE_BUSY			1
+#define SCISSOR_LEFT_FLAG		0x10
+#define SCISSOR_RIGHT_FLAG		0x20
+#define SCISSOR_TOP_FLAG		0x40
+#define SCISSOR_BOTTOM_FLAG		0x80
+
+/* ATI VGA Extended Regsiters */
+#define sioATIEXT		0x1ce
+#define bioATIEXT		0x3ce
+
+#define ATI2E			0xae
+#define ATI32			0xb2
+#define ATI36			0xb6
+
+/* VGA Graphics Controller Registers */
+#define R_GENMO			0x3cc
+#define VGAGRA			0x3ce
+#define GRA06			0x06
+
+/* VGA Seququencer Registers */
+#define VGASEQ			0x3c4
+#define SEQ02			0x02
+#define SEQ04			0x04
+
+#define MACH64_MAX_X		ENGINE_MAX_X
+#define MACH64_MAX_Y		ENGINE_MAX_Y
+
+#define INC_X			0x0020
+#define INC_Y			0x0080
+
+#define RGB16_555		0x0000
+#define RGB16_565		0x0040
+#define RGB16_655		0x0080
+#define RGB16_664		0x00c0
+
+#define POLY_TEXT_TYPE		0x0001
+#define IMAGE_TEXT_TYPE		0x0002
+#define TEXT_TYPE_8_BIT		0x0004
+#define TEXT_TYPE_16_BIT	0x0008
+#define POLY_TEXT_TYPE_8	(POLY_TEXT_TYPE | TEXT_TYPE_8_BIT)
+#define IMAGE_TEXT_TYPE_8	(IMAGE_TEXT_TYPE | TEXT_TYPE_8_BIT)
+#define POLY_TEXT_TYPE_16	(POLY_TEXT_TYPE | TEXT_TYPE_16_BIT)
+#define IMAGE_TEXT_TYPE_16	(IMAGE_TEXT_TYPE | TEXT_TYPE_16_BIT)
+
+#define MACH64_NUM_CLOCKS	16
+#define MACH64_NUM_FREQS	50
+
+/* Power Management register constants (LT & LT Pro) */
+#define PWR_MGT_ON		0x00000001
+#define PWR_MGT_MODE_MASK	0x00000006
+#define AUTO_PWR_UP		0x00000008
+#define USE_F32KHZ		0x00000400
+#define TRISTATE_MEM_EN		0x00000800
+#define SELF_REFRESH		0x00000080
+#define PWR_BLON		0x02000000
+#define STANDBY_NOW		0x10000000
+#define SUSPEND_NOW		0x20000000
+#define PWR_MGT_STATUS_MASK	0xC0000000
+#define PWR_MGT_STATUS_SUSPEND	0x80000000
+
+/* PM Mode constants  */
+#define PWR_MGT_MODE_PIN	0x00000000
+#define PWR_MGT_MODE_REG	0x00000002
+#define PWR_MGT_MODE_TIMER	0x00000004
+#define PWR_MGT_MODE_PCI	0x00000006
+
+/* LCD registers (LT Pro) */
+
+/* LCD Index register */
+#define LCD_INDEX_MASK		0x0000003F
+#define LCD_DISPLAY_DIS		0x00000100
+#define LCD_SRC_SEL		0x00000200
+#define CRTC2_DISPLAY_DIS	0x00000400
+
+/* LCD register indices */
+#define CNFG_PANEL		0x00
+#define LCD_GEN_CNTL		0x01
+#define DSTN_CONTROL		0x02
+#define HFB_PITCH_ADDR		0x03
+#define HORZ_STRETCHING		0x04
+#define VERT_STRETCHING		0x05
+#define EXT_VERT_STRETCH	0x06
+#define LT_GIO			0x07
+#define POWER_MANAGEMENT	0x08
+#define ZVGPIO			0x09
+#define ICON_CLR0		0x0A
+#define ICON_CLR1		0x0B
+#define ICON_OFFSET		0x0C
+#define ICON_HORZ_VERT_POSN	0x0D
+#define ICON_HORZ_VERT_OFF	0x0E
+#define ICON2_CLR0		0x0F
+#define ICON2_CLR1		0x10
+#define ICON2_OFFSET		0x11
+#define ICON2_HORZ_VERT_POSN	0x12
+#define ICON2_HORZ_VERT_OFF	0x13
+#define LCD_MISC_CNTL		0x14
+#define APC_CNTL		0x1C
+#define POWER_MANAGEMENT_2	0x1D
+#define ALPHA_BLENDING		0x25
+#define PORTRAIT_GEN_CNTL	0x26
+#define APC_CTRL_IO		0x27
+#define TEST_IO			0x28
+#define TEST_OUTPUTS		0x29
+#define DP1_MEM_ACCESS		0x2A
+#define DP0_MEM_ACCESS		0x2B
+#define DP0_DEBUG_A		0x2C
+#define DP0_DEBUG_B		0x2D
+#define DP1_DEBUG_A		0x2E
+#define DP1_DEBUG_B		0x2F
+#define DPCTRL_DEBUG_A		0x30
+#define DPCTRL_DEBUG_B		0x31
+#define MEMBLK_DEBUG		0x32
+#define APC_LUT_AB		0x33
+#define APC_LUT_CD		0x34
+#define APC_LUT_EF		0x35
+#define APC_LUT_GH		0x36
+#define APC_LUT_IJ		0x37
+#define APC_LUT_KL		0x38
+#define APC_LUT_MN		0x39
+#define APC_LUT_OP		0x3A
+
+/* Values in LCD_GEN_CTRL */
+#define CRT_ON                          0x00000001ul
+#define LCD_ON                          0x00000002ul
+#define HORZ_DIVBY2_EN                  0x00000004ul
+#define DONT_DS_ICON                    0x00000008ul
+#define LOCK_8DOT                       0x00000010ul
+#define ICON_ENABLE                     0x00000020ul
+#define DONT_SHADOW_VPAR                0x00000040ul
+#define V2CLK_PM_EN                     0x00000080ul
+#define RST_FM                          0x00000100ul
+#define DISABLE_PCLK_RESET              0x00000200ul	/* XC/XL */
+#define DIS_HOR_CRT_DIVBY2              0x00000400ul
+#define SCLK_SEL                        0x00000800ul
+#define SCLK_DELAY                      0x0000f000ul
+#define TVCLK_PM_EN                     0x00010000ul
+#define VCLK_DAC_PM_EN                  0x00020000ul
+#define VCLK_LCD_OFF                    0x00040000ul
+#define SELECT_WAIT_4MS                 0x00080000ul
+#define XTALIN_PM_EN                    0x00080000ul	/* XC/XL */
+#define V2CLK_DAC_PM_EN                 0x00100000ul
+#define LVDS_EN                         0x00200000ul
+#define LVDS_PLL_EN                     0x00400000ul
+#define LVDS_PLL_RESET                  0x00800000ul
+#define LVDS_RESERVED_BITS              0x07000000ul
+#define CRTC_RW_SELECT                  0x08000000ul	/* LTPro */
+#define USE_SHADOWED_VEND               0x10000000ul
+#define USE_SHADOWED_ROWCUR             0x20000000ul
+#define SHADOW_EN                       0x40000000ul
+#define SHADOW_RW_EN                  	0x80000000ul
+
+#define LCD_SET_PRIMARY_MASK            0x07FFFBFBul
+
+/* Values in HORZ_STRETCHING */
+#define HORZ_STRETCH_BLEND		0x00000ffful
+#define HORZ_STRETCH_RATIO		0x0000fffful
+#define HORZ_STRETCH_LOOP		0x00070000ul
+#define HORZ_STRETCH_LOOP09		0x00000000ul
+#define HORZ_STRETCH_LOOP11		0x00010000ul
+#define HORZ_STRETCH_LOOP12		0x00020000ul
+#define HORZ_STRETCH_LOOP14		0x00030000ul
+#define HORZ_STRETCH_LOOP15		0x00040000ul
+/*	?				0x00050000ul */
+/*	?				0x00060000ul */
+/*	?				0x00070000ul */
+/*	?				0x00080000ul */
+#define HORZ_PANEL_SIZE			0x0ff00000ul	/* XC/XL */
+/*	?				0x10000000ul */
+#define AUTO_HORZ_RATIO			0x20000000ul	/* XC/XL */
+#define HORZ_STRETCH_MODE		0x40000000ul
+#define HORZ_STRETCH_EN			0x80000000ul
+
+/* Values in VERT_STRETCHING */
+#define VERT_STRETCH_RATIO0		0x000003fful
+#define VERT_STRETCH_RATIO1		0x000ffc00ul
+#define VERT_STRETCH_RATIO2		0x3ff00000ul
+#define VERT_STRETCH_USE0		0x40000000ul
+#define VERT_STRETCH_EN			0x80000000ul
+
+/* Values in EXT_VERT_STRETCH */
+#define VERT_STRETCH_RATIO3		0x000003fful
+#define FORCE_DAC_DATA			0x000000fful
+#define FORCE_DAC_DATA_SEL		0x00000300ul
+#define VERT_STRETCH_MODE		0x00000400ul
+#define VERT_PANEL_SIZE			0x003ff800ul
+#define AUTO_VERT_RATIO			0x00400000ul
+#define USE_AUTO_FP_POS			0x00800000ul
+#define USE_AUTO_LCD_VSYNC		0x01000000ul
+/*	?				0xfe000000ul */
+
+/* Values in LCD_MISC_CNTL */
+#define BIAS_MOD_LEVEL_MASK		0x0000ff00
+#define BIAS_MOD_LEVEL_SHIFT		8
+#define BLMOD_EN			0x00010000
+#define BIASMOD_EN			0x00020000
+
+#endif				/* REGMACH64_H */
diff --git a/include/video/maxinefb.h b/include/video/maxinefb.h
new file mode 100644
index 00000000..6aeb4acc
--- /dev/null
+++ b/include/video/maxinefb.h
@@ -0,0 +1,38 @@
+/*
+ *      linux/drivers/video/maxinefb.h
+ *
+ *      DECstation 5000/xx onboard framebuffer support, Copyright (C) 1999 by
+ *      Michael Engel <engel@unix-ag.org> and Karsten Merker <merker@guug.de>
+ *      This file is subject to the terms and conditions of the GNU General
+ *      Public License.  See the file COPYING in the main directory of this
+ *      archive for more details.
+ */
+
+#include <asm/addrspace.h>
+
+/*
+ * IMS332 video controller register base address
+ */
+#define MAXINEFB_IMS332_ADDRESS		KSEG1ADDR(0x1c140000)
+
+/*
+ * Begin of DECstation 5000/xx onboard framebuffer memory, default resolution
+ * is 1024x768x8
+ */
+#define DS5000_xx_ONBOARD_FBMEM_START	KSEG1ADDR(0x0a000000)
+
+/*
+ *      The IMS 332 video controller used in the DECstation 5000/xx series
+ *      uses 32 bits wide registers; the following defines declare the
+ *      register numbers, to get the real offset, these have to be multiplied
+ *      by four.
+ */
+
+#define IMS332_REG_CURSOR_RAM           0x200	/* hardware cursor bitmap */
+
+/*
+ * The color palette entries have the form 0x00BBGGRR
+ */
+#define IMS332_REG_COLOR_PALETTE        0x100	/* color palette, 256 entries */
+#define IMS332_REG_CURSOR_COLOR_PALETTE	0x0a1	/* cursor color palette, */
+						/* 3 entries             */
diff --git a/include/video/mbxfb.h b/include/video/mbxfb.h
new file mode 100644
index 00000000..ea18961f
--- /dev/null
+++ b/include/video/mbxfb.h
@@ -0,0 +1,98 @@
+#ifndef __MBX_FB_H
+#define __MBX_FB_H
+
+#include <asm/ioctl.h>
+#include <asm/types.h>
+
+struct mbxfb_val {
+	unsigned int	defval;
+	unsigned int	min;
+	unsigned int	max;
+};
+
+struct fb_info;
+
+struct mbxfb_platform_data {
+		/* Screen info */
+		struct mbxfb_val xres;
+		struct mbxfb_val yres;
+		struct mbxfb_val bpp;
+
+		/* Memory info */
+		unsigned long memsize; /* if 0 use ODFB? */
+		unsigned long timings1;
+		unsigned long timings2;
+		unsigned long timings3;
+
+		int (*probe)(struct fb_info *fb);
+		int (*remove)(struct fb_info *fb);
+};
+
+/* planar */
+#define MBXFB_FMT_YUV16		0
+#define MBXFB_FMT_YUV12		1
+
+/* packed */
+#define MBXFB_FMT_UY0VY1	2
+#define MBXFB_FMT_VY0UY1	3
+#define MBXFB_FMT_Y0UY1V	4
+#define MBXFB_FMT_Y0VY1U	5
+struct mbxfb_overlaySetup {
+	__u32 enable;
+	__u32 x, y;
+	__u32 width, height;
+	__u32 fmt;
+	__u32 mem_offset;
+	__u32 scaled_width;
+	__u32 scaled_height;
+
+	/* Filled by the driver */
+	__u32 U_offset;
+	__u32 V_offset;
+
+	__u16 Y_stride;
+	__u16 UV_stride;
+};
+
+#define MBXFB_ALPHABLEND_NONE		0
+#define MBXFB_ALPHABLEND_GLOBAL		1
+#define MBXFB_ALPHABLEND_PIXEL		2
+
+#define MBXFB_COLORKEY_DISABLED		0
+#define MBXFB_COLORKEY_PREVIOUS		1
+#define MBXFB_COLORKEY_CURRENT		2
+struct mbxfb_alphaCtl {
+	__u8 overlay_blend_mode;
+	__u8 overlay_colorkey_mode;
+	__u8 overlay_global_alpha;
+	__u32 overlay_colorkey;
+	__u32 overlay_colorkey_mask;
+
+	__u8 graphics_blend_mode;
+	__u8 graphics_colorkey_mode;
+	__u8 graphics_global_alpha;
+	__u32 graphics_colorkey;
+	__u32 graphics_colorkey_mask;
+};
+
+#define MBXFB_PLANE_GRAPHICS	0
+#define MBXFB_PLANE_VIDEO	1
+struct mbxfb_planeorder {
+	__u8 bottom;
+	__u8 top;
+};
+
+struct mbxfb_reg {
+	__u32 addr; 	/* offset from 0x03fe 0000 */
+	__u32 val;		/* value */
+	__u32 mask;		/* which bits to touch (for write) */
+};
+
+#define MBXFB_IOCX_OVERLAY		_IOWR(0xF4, 0x00,struct mbxfb_overlaySetup)
+#define MBXFB_IOCG_ALPHA		_IOR(0xF4, 0x01,struct mbxfb_alphaCtl)
+#define MBXFB_IOCS_ALPHA		_IOW(0xF4, 0x02,struct mbxfb_alphaCtl)
+#define MBXFB_IOCS_PLANEORDER	_IOR(0xF4, 0x03,struct mbxfb_planeorder)
+#define MBXFB_IOCS_REG			_IOW(0xF4, 0x04,struct mbxfb_reg)
+#define MBXFB_IOCX_REG			_IOWR(0xF4, 0x05,struct mbxfb_reg)
+
+#endif /* __MBX_FB_H */
diff --git a/include/video/metronomefb.h b/include/video/metronomefb.h
new file mode 100644
index 00000000..9863f4b6
--- /dev/null
+++ b/include/video/metronomefb.h
@@ -0,0 +1,57 @@
+/*
+ * metronomefb.h - definitions for the metronome framebuffer driver
+ *
+ * Copyright (C) 2008 by Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ */
+
+#ifndef _LINUX_METRONOMEFB_H_
+#define _LINUX_METRONOMEFB_H_
+
+/* command structure used by metronome controller */
+struct metromem_cmd {
+	u16 opcode;
+	u16 args[((64-2)/2)];
+	u16 csum;
+};
+
+/* struct used by metronome. board specific stuff comes from *board */
+struct metronomefb_par {
+	struct metromem_cmd *metromem_cmd;
+	unsigned char *metromem_wfm;
+	unsigned char *metromem_img;
+	u16 *metromem_img_csum;
+	u16 *csum_table;
+	dma_addr_t metromem_dma;
+	struct fb_info *info;
+	struct metronome_board *board;
+	wait_queue_head_t waitq;
+	u8 frame_count;
+	int extra_size;
+	int dt;
+};
+
+/* board specific routines and data */
+struct metronome_board {
+	struct module *owner; /* the platform device */
+	void (*set_rst)(struct metronomefb_par *, int);
+	void (*set_stdby)(struct metronomefb_par *, int);
+	void (*cleanup)(struct metronomefb_par *);
+	int (*met_wait_event)(struct metronomefb_par *);
+	int (*met_wait_event_intr)(struct metronomefb_par *);
+	int (*setup_irq)(struct fb_info *);
+	int (*setup_fb)(struct metronomefb_par *);
+	int (*setup_io)(struct metronomefb_par *);
+	int (*get_panel_type)(void);
+	unsigned char *metromem;
+	int fw;
+	int fh;
+	int wfm_size;
+	struct fb_info *host_fbinfo; /* the host LCD controller's fbi */
+};
+
+#endif
diff --git a/include/video/mipi_display.h b/include/video/mipi_display.h
new file mode 100644
index 00000000..ddcc8ca7
--- /dev/null
+++ b/include/video/mipi_display.h
@@ -0,0 +1,130 @@
+/*
+ * Defines for Mobile Industry Processor Interface (MIPI(R))
+ * Display Working Group standards: DSI, DCS, DBI, DPI
+ *
+ * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ * Copyright (C) 2006 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef MIPI_DISPLAY_H
+#define MIPI_DISPLAY_H
+
+/* MIPI DSI Processor-to-Peripheral transaction types */
+enum {
+	MIPI_DSI_V_SYNC_START				= 0x01,
+	MIPI_DSI_V_SYNC_END				= 0x11,
+	MIPI_DSI_H_SYNC_START				= 0x21,
+	MIPI_DSI_H_SYNC_END				= 0x31,
+
+	MIPI_DSI_COLOR_MODE_OFF				= 0x02,
+	MIPI_DSI_COLOR_MODE_ON				= 0x12,
+	MIPI_DSI_SHUTDOWN_PERIPHERAL			= 0x22,
+	MIPI_DSI_TURN_ON_PERIPHERAL			= 0x32,
+
+	MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM		= 0x03,
+	MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM		= 0x13,
+	MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM		= 0x23,
+
+	MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM		= 0x04,
+	MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM		= 0x14,
+	MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM		= 0x24,
+
+	MIPI_DSI_DCS_SHORT_WRITE			= 0x05,
+	MIPI_DSI_DCS_SHORT_WRITE_PARAM			= 0x15,
+
+	MIPI_DSI_DCS_READ				= 0x06,
+
+	MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE		= 0x37,
+
+	MIPI_DSI_END_OF_TRANSMISSION			= 0x08,
+
+	MIPI_DSI_NULL_PACKET				= 0x09,
+	MIPI_DSI_BLANKING_PACKET			= 0x19,
+	MIPI_DSI_GENERIC_LONG_WRITE			= 0x29,
+	MIPI_DSI_DCS_LONG_WRITE				= 0x39,
+
+	MIPI_DSI_LOOSELY_PACKED_PIXEL_STREAM_YCBCR20	= 0x0c,
+	MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR24		= 0x1c,
+	MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16		= 0x2c,
+
+	MIPI_DSI_PACKED_PIXEL_STREAM_30			= 0x0d,
+	MIPI_DSI_PACKED_PIXEL_STREAM_36			= 0x1d,
+	MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12		= 0x3d,
+
+	MIPI_DSI_PACKED_PIXEL_STREAM_16			= 0x0e,
+	MIPI_DSI_PACKED_PIXEL_STREAM_18			= 0x1e,
+	MIPI_DSI_PIXEL_STREAM_3BYTE_18			= 0x2e,
+	MIPI_DSI_PACKED_PIXEL_STREAM_24			= 0x3e,
+};
+
+/* MIPI DSI Peripheral-to-Processor transaction types */
+enum {
+	MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT	= 0x02,
+	MIPI_DSI_RX_END_OF_TRANSMISSION			= 0x08,
+	MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE	= 0x11,
+	MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE	= 0x12,
+	MIPI_DSI_RX_GENERIC_LONG_READ_RESPONSE		= 0x1a,
+	MIPI_DSI_RX_DCS_LONG_READ_RESPONSE		= 0x1c,
+	MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE	= 0x21,
+	MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_2BYTE	= 0x22,
+};
+
+/* MIPI DCS commands */
+enum {
+	MIPI_DCS_NOP			= 0x00,
+	MIPI_DCS_SOFT_RESET		= 0x01,
+	MIPI_DCS_GET_DISPLAY_ID		= 0x04,
+	MIPI_DCS_GET_RED_CHANNEL	= 0x06,
+	MIPI_DCS_GET_GREEN_CHANNEL	= 0x07,
+	MIPI_DCS_GET_BLUE_CHANNEL	= 0x08,
+	MIPI_DCS_GET_DISPLAY_STATUS	= 0x09,
+	MIPI_DCS_GET_POWER_MODE		= 0x0A,
+	MIPI_DCS_GET_ADDRESS_MODE	= 0x0B,
+	MIPI_DCS_GET_PIXEL_FORMAT	= 0x0C,
+	MIPI_DCS_GET_DISPLAY_MODE	= 0x0D,
+	MIPI_DCS_GET_SIGNAL_MODE	= 0x0E,
+	MIPI_DCS_GET_DIAGNOSTIC_RESULT	= 0x0F,
+	MIPI_DCS_ENTER_SLEEP_MODE	= 0x10,
+	MIPI_DCS_EXIT_SLEEP_MODE	= 0x11,
+	MIPI_DCS_ENTER_PARTIAL_MODE	= 0x12,
+	MIPI_DCS_ENTER_NORMAL_MODE	= 0x13,
+	MIPI_DCS_EXIT_INVERT_MODE	= 0x20,
+	MIPI_DCS_ENTER_INVERT_MODE	= 0x21,
+	MIPI_DCS_SET_GAMMA_CURVE	= 0x26,
+	MIPI_DCS_SET_DISPLAY_OFF	= 0x28,
+	MIPI_DCS_SET_DISPLAY_ON		= 0x29,
+	MIPI_DCS_SET_COLUMN_ADDRESS	= 0x2A,
+	MIPI_DCS_SET_PAGE_ADDRESS	= 0x2B,
+	MIPI_DCS_WRITE_MEMORY_START	= 0x2C,
+	MIPI_DCS_WRITE_LUT		= 0x2D,
+	MIPI_DCS_READ_MEMORY_START	= 0x2E,
+	MIPI_DCS_SET_PARTIAL_AREA	= 0x30,
+	MIPI_DCS_SET_SCROLL_AREA	= 0x33,
+	MIPI_DCS_SET_TEAR_OFF		= 0x34,
+	MIPI_DCS_SET_TEAR_ON		= 0x35,
+	MIPI_DCS_SET_ADDRESS_MODE	= 0x36,
+	MIPI_DCS_SET_SCROLL_START	= 0x37,
+	MIPI_DCS_EXIT_IDLE_MODE		= 0x38,
+	MIPI_DCS_ENTER_IDLE_MODE	= 0x39,
+	MIPI_DCS_SET_PIXEL_FORMAT	= 0x3A,
+	MIPI_DCS_WRITE_MEMORY_CONTINUE	= 0x3C,
+	MIPI_DCS_READ_MEMORY_CONTINUE	= 0x3E,
+	MIPI_DCS_SET_TEAR_SCANLINE	= 0x44,
+	MIPI_DCS_GET_SCANLINE		= 0x45,
+	MIPI_DCS_READ_DDB_START		= 0xA1,
+	MIPI_DCS_READ_DDB_CONTINUE	= 0xA8,
+};
+
+/* MIPI DCS pixel formats */
+#define MIPI_DCS_PIXEL_FMT_24BIT	7
+#define MIPI_DCS_PIXEL_FMT_18BIT	6
+#define MIPI_DCS_PIXEL_FMT_16BIT	5
+#define MIPI_DCS_PIXEL_FMT_12BIT	3
+#define MIPI_DCS_PIXEL_FMT_8BIT		2
+#define MIPI_DCS_PIXEL_FMT_3BIT		1
+
+#endif
diff --git a/include/video/neomagic.h b/include/video/neomagic.h
new file mode 100644
index 00000000..bc5013e8
--- /dev/null
+++ b/include/video/neomagic.h
@@ -0,0 +1,192 @@
+/*
+ * linux/include/video/neo_reg.h -- NeoMagic Framebuffer Driver
+ *
+ * Copyright (c) 2001  Denis Oliver Kropp <dok@convergence.de>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#define NEO_BS0_BLT_BUSY        0x00000001
+#define NEO_BS0_FIFO_AVAIL      0x00000002
+#define NEO_BS0_FIFO_PEND       0x00000004
+
+#define NEO_BC0_DST_Y_DEC       0x00000001
+#define NEO_BC0_X_DEC           0x00000002
+#define NEO_BC0_SRC_TRANS       0x00000004
+#define NEO_BC0_SRC_IS_FG       0x00000008
+#define NEO_BC0_SRC_Y_DEC       0x00000010
+#define NEO_BC0_FILL_PAT        0x00000020
+#define NEO_BC0_SRC_MONO        0x00000040
+#define NEO_BC0_SYS_TO_VID      0x00000080
+
+#define NEO_BC1_DEPTH8          0x00000100
+#define NEO_BC1_DEPTH16         0x00000200
+#define NEO_BC1_X_320           0x00000400
+#define NEO_BC1_X_640           0x00000800
+#define NEO_BC1_X_800           0x00000c00
+#define NEO_BC1_X_1024          0x00001000
+#define NEO_BC1_X_1152          0x00001400
+#define NEO_BC1_X_1280          0x00001800
+#define NEO_BC1_X_1600          0x00001c00
+#define NEO_BC1_DST_TRANS       0x00002000
+#define NEO_BC1_MSTR_BLT        0x00004000
+#define NEO_BC1_FILTER_Z        0x00008000
+
+#define NEO_BC2_WR_TR_DST       0x00800000
+
+#define NEO_BC3_SRC_XY_ADDR     0x01000000
+#define NEO_BC3_DST_XY_ADDR     0x02000000
+#define NEO_BC3_CLIP_ON         0x04000000
+#define NEO_BC3_FIFO_EN         0x08000000
+#define NEO_BC3_BLT_ON_ADDR     0x10000000
+#define NEO_BC3_SKIP_MAPPING    0x80000000
+
+#define NEO_MODE1_DEPTH8        0x0100
+#define NEO_MODE1_DEPTH16       0x0200
+#define NEO_MODE1_DEPTH24       0x0300
+#define NEO_MODE1_X_320         0x0400
+#define NEO_MODE1_X_640         0x0800
+#define NEO_MODE1_X_800         0x0c00
+#define NEO_MODE1_X_1024        0x1000
+#define NEO_MODE1_X_1152        0x1400
+#define NEO_MODE1_X_1280        0x1800
+#define NEO_MODE1_X_1600        0x1c00
+#define NEO_MODE1_BLT_ON_ADDR   0x2000
+
+/* These are offseted in MMIO space by par->CursorOff */
+#define NEOREG_CURSCNTL		0x00
+#define NEOREG_CURSX		0x04
+#define NEOREG_CURSY		0x08
+#define NEOREG_CURSBGCOLOR	0x0C
+#define NEOREG_CURSFGCOLOR	0x10
+#define NEOREG_CURSMEMPOS	0x14
+
+#define NEO_CURS_DISABLE	0x00000000
+#define NEO_CURS_ENABLE		0x00000001
+#define NEO_ICON64_ENABLE	0x00000008
+#define NEO_ICON128_ENABLE	0x0000000C
+#define NEO_ICON_BLANK		0x00000010
+
+#define NEO_GR01_SUPPRESS_VSYNC 0x10
+#define NEO_GR01_SUPPRESS_HSYNC 0x20
+
+#ifdef __KERNEL__
+
+#ifdef NEOFB_DEBUG
+# define DBG(x)		printk (KERN_DEBUG "neofb: %s\n", (x));
+#else
+# define DBG(x)
+#endif
+
+#define PCI_CHIP_NM2070 0x0001
+#define PCI_CHIP_NM2090 0x0002
+#define PCI_CHIP_NM2093 0x0003
+#define PCI_CHIP_NM2097 0x0083
+#define PCI_CHIP_NM2160 0x0004
+#define PCI_CHIP_NM2200 0x0005
+#define PCI_CHIP_NM2230 0x0025
+#define PCI_CHIP_NM2360 0x0006
+#define PCI_CHIP_NM2380 0x0016
+
+/* --------------------------------------------------------------------- */
+
+typedef volatile struct {
+	__u32 bltStat;
+	__u32 bltCntl;
+	__u32 xpColor;
+	__u32 fgColor;
+	__u32 bgColor;
+	__u32 pitch;
+	__u32 clipLT;
+	__u32 clipRB;
+	__u32 srcBitOffset;
+	__u32 srcStart;
+	__u32 reserved0;
+	__u32 dstStart;
+	__u32 xyExt;
+
+	__u32 reserved1[19];
+
+	__u32 pageCntl;
+	__u32 pageBase;
+	__u32 postBase;
+	__u32 postPtr;
+	__u32 dataPtr;
+} Neo2200;
+
+#define MMIO_SIZE 0x200000
+
+#define NEO_EXT_CR_MAX 0x85
+#define NEO_EXT_GR_MAX 0xC7
+
+struct neofb_par {
+	struct vgastate state;
+	unsigned int ref_count;
+
+	unsigned char MiscOutReg;	/* Misc */
+	unsigned char CRTC[25];		/* Crtc Controller */
+	unsigned char Sequencer[5];	/* Video Sequencer */
+	unsigned char Graphics[9];	/* Video Graphics */
+	unsigned char Attribute[21];	/* Video Attribute */
+
+	unsigned char GeneralLockReg;
+	unsigned char ExtCRTDispAddr;
+	unsigned char ExtCRTOffset;
+	unsigned char SysIfaceCntl1;
+	unsigned char SysIfaceCntl2;
+	unsigned char ExtColorModeSelect;
+	unsigned char biosMode;
+
+	unsigned char PanelDispCntlReg1;
+	unsigned char PanelDispCntlReg2;
+	unsigned char PanelDispCntlReg3;
+	unsigned char PanelDispCntlRegRead;
+	unsigned char PanelVertCenterReg1;
+	unsigned char PanelVertCenterReg2;
+	unsigned char PanelVertCenterReg3;
+	unsigned char PanelVertCenterReg4;
+	unsigned char PanelVertCenterReg5;
+	unsigned char PanelHorizCenterReg1;
+	unsigned char PanelHorizCenterReg2;
+	unsigned char PanelHorizCenterReg3;
+	unsigned char PanelHorizCenterReg4;
+	unsigned char PanelHorizCenterReg5;
+
+	int ProgramVCLK;
+	unsigned char VCLK3NumeratorLow;
+	unsigned char VCLK3NumeratorHigh;
+	unsigned char VCLK3Denominator;
+	unsigned char VerticalExt;
+
+#ifdef CONFIG_MTRR
+	int mtrr;
+#endif
+	u8 __iomem *mmio_vbase;
+	u8 cursorOff;
+	u8 *cursorPad;		/* Must die !! */
+
+	Neo2200 __iomem *neo2200;
+
+	/* Panels size */
+	int NeoPanelWidth;
+	int NeoPanelHeight;
+
+	int maxClock;
+
+	int pci_burst;
+	int lcd_stretch;
+	int internal_display;
+	int external_display;
+	int libretto;
+	u32 palette[16];
+};
+
+typedef struct {
+	int x_res;
+	int y_res;
+	int mode;
+} biosMode;
+
+#endif
diff --git a/include/video/newport.h b/include/video/newport.h
new file mode 100644
index 00000000..de980a3b
--- /dev/null
+++ b/include/video/newport.h
@@ -0,0 +1,583 @@
+/* $Id: newport.h,v 1.5 1999/08/04 06:01:51 ulfc Exp $
+ *
+ * newport.h: Defines and register layout for NEWPORT graphics
+ *            hardware.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
+ * 
+ * Ulf Carlsson - Compatibility with the IRIX structures added
+ */
+
+#ifndef _SGI_NEWPORT_H
+#define _SGI_NEWPORT_H
+
+
+typedef volatile unsigned int npireg_t;
+
+union npfloat {
+	volatile float flt;
+	npireg_t       word;
+};
+
+typedef union npfloat npfreg_t;
+
+union np_dcb {
+	npireg_t byword;
+	struct { volatile unsigned short s0, s1; } byshort;
+	struct { volatile unsigned char b0, b1, b2, b3; } bybytes;
+};
+
+struct newport_rexregs {
+	npireg_t drawmode1;      /* GL extra mode bits */
+	
+#define DM1_PLANES         0x00000007
+#define    DM1_NOPLANES    0x00000000
+#define    DM1_RGBPLANES   0x00000001
+#define    DM1_RGBAPLANES  0x00000002
+#define    DM1_OLAYPLANES  0x00000004
+#define    DM1_PUPPLANES   0x00000005
+#define    DM1_CIDPLANES   0x00000006
+	
+#define NPORT_DMODE1_DDMASK      0x00000018
+#define NPORT_DMODE1_DD4         0x00000000
+#define NPORT_DMODE1_DD8         0x00000008
+#define NPORT_DMODE1_DD12        0x00000010
+#define NPORT_DMODE1_DD24        0x00000018
+#define NPORT_DMODE1_DSRC        0x00000020
+#define NPORT_DMODE1_YFLIP       0x00000040
+#define NPORT_DMODE1_RWPCKD      0x00000080
+#define NPORT_DMODE1_HDMASK      0x00000300
+#define NPORT_DMODE1_HD4         0x00000000
+#define NPORT_DMODE1_HD8         0x00000100
+#define NPORT_DMODE1_HD12        0x00000200
+#define NPORT_DMODE1_HD32        0x00000300
+#define NPORT_DMODE1_RWDBL       0x00000400
+#define NPORT_DMODE1_ESWAP       0x00000800 /* Endian swap */
+#define NPORT_DMODE1_CCMASK      0x00007000
+#define NPORT_DMODE1_CCLT        0x00001000
+#define NPORT_DMODE1_CCEQ        0x00002000
+#define NPORT_DMODE1_CCGT        0x00004000
+#define NPORT_DMODE1_RGBMD       0x00008000
+#define NPORT_DMODE1_DENAB       0x00010000 /* Dither enable */
+#define NPORT_DMODE1_FCLR        0x00020000 /* Fast clear */
+#define NPORT_DMODE1_BENAB       0x00040000 /* Blend enable */
+#define NPORT_DMODE1_SFMASK      0x00380000
+#define NPORT_DMODE1_SF0         0x00000000
+#define NPORT_DMODE1_SF1         0x00080000
+#define NPORT_DMODE1_SFDC        0x00100000
+#define NPORT_DMODE1_SFMDC       0x00180000
+#define NPORT_DMODE1_SFSA        0x00200000
+#define NPORT_DMODE1_SFMSA       0x00280000
+#define NPORT_DMODE1_DFMASK      0x01c00000
+#define NPORT_DMODE1_DF0         0x00000000
+#define NPORT_DMODE1_DF1         0x00400000
+#define NPORT_DMODE1_DFSC        0x00800000
+#define NPORT_DMODE1_DFMSC       0x00c00000
+#define NPORT_DMODE1_DFSA        0x01000000
+#define NPORT_DMODE1_DFMSA       0x01400000
+#define NPORT_DMODE1_BBENAB      0x02000000 /* Back blend enable */
+#define NPORT_DMODE1_PFENAB      0x04000000 /* Pre-fetch enable */
+#define NPORT_DMODE1_ABLEND      0x08000000 /* Alpha blend */
+#define NPORT_DMODE1_LOMASK      0xf0000000
+#define NPORT_DMODE1_LOZERO      0x00000000
+#define NPORT_DMODE1_LOAND       0x10000000
+#define NPORT_DMODE1_LOANDR      0x20000000
+#define NPORT_DMODE1_LOSRC       0x30000000
+#define NPORT_DMODE1_LOANDI      0x40000000
+#define NPORT_DMODE1_LODST       0x50000000
+#define NPORT_DMODE1_LOXOR       0x60000000
+#define NPORT_DMODE1_LOOR        0x70000000
+#define NPORT_DMODE1_LONOR       0x80000000
+#define NPORT_DMODE1_LOXNOR      0x90000000
+#define NPORT_DMODE1_LONDST      0xa0000000
+#define NPORT_DMODE1_LOORR       0xb0000000
+#define NPORT_DMODE1_LONSRC      0xc0000000
+#define NPORT_DMODE1_LOORI       0xd0000000
+#define NPORT_DMODE1_LONAND      0xe0000000
+#define NPORT_DMODE1_LOONE       0xf0000000
+
+	npireg_t drawmode0;      /* REX command register */
+
+	/* These bits define the graphics opcode being performed. */
+#define NPORT_DMODE0_OPMASK   0x00000003 /* Opcode mask */
+#define NPORT_DMODE0_NOP      0x00000000 /* No operation */
+#define NPORT_DMODE0_RD       0x00000001 /* Read operation */
+#define NPORT_DMODE0_DRAW     0x00000002 /* Draw operation */
+#define NPORT_DMODE0_S2S      0x00000003 /* Screen to screen operation */
+
+	/* The following decide what addressing mode(s) are to be used */
+#define NPORT_DMODE0_AMMASK   0x0000001c /* Address mode mask */
+#define NPORT_DMODE0_SPAN     0x00000000 /* Spanning address mode */
+#define NPORT_DMODE0_BLOCK    0x00000004 /* Block address mode */
+#define NPORT_DMODE0_ILINE    0x00000008 /* Iline address mode */
+#define NPORT_DMODE0_FLINE    0x0000000c /* Fline address mode */
+#define NPORT_DMODE0_ALINE    0x00000010 /* Aline address mode */
+#define NPORT_DMODE0_TLINE    0x00000014 /* Tline address mode */
+#define NPORT_DMODE0_BLINE    0x00000018 /* Bline address mode */
+
+	/* And now some misc. operation control bits. */
+#define NPORT_DMODE0_DOSETUP  0x00000020
+#define NPORT_DMODE0_CHOST    0x00000040
+#define NPORT_DMODE0_AHOST    0x00000080
+#define NPORT_DMODE0_STOPX    0x00000100
+#define NPORT_DMODE0_STOPY    0x00000200
+#define NPORT_DMODE0_SK1ST    0x00000400
+#define NPORT_DMODE0_SKLST    0x00000800
+#define NPORT_DMODE0_ZPENAB   0x00001000
+#define NPORT_DMODE0_LISPENAB 0x00002000
+#define NPORT_DMODE0_LISLST   0x00004000
+#define NPORT_DMODE0_L32      0x00008000
+#define NPORT_DMODE0_ZOPQ     0x00010000
+#define NPORT_DMODE0_LISOPQ   0x00020000
+#define NPORT_DMODE0_SHADE    0x00040000
+#define NPORT_DMODE0_LRONLY   0x00080000
+#define NPORT_DMODE0_XYOFF    0x00100000
+#define NPORT_DMODE0_CLAMP    0x00200000
+#define NPORT_DMODE0_ENDPF    0x00400000
+#define NPORT_DMODE0_YSTR     0x00800000
+
+	npireg_t lsmode;      /* Mode for line stipple ops */
+	npireg_t lspattern;   /* Pattern for line stipple ops */
+	npireg_t lspatsave;   /* Backup save pattern */
+	npireg_t zpattern;    /* Pixel zpattern */
+	npireg_t colorback;   /* Background color */
+	npireg_t colorvram;   /* Clear color for fast vram */
+	npireg_t alpharef;    /* Reference value for afunctions */
+	unsigned int pad0;
+	npireg_t smask0x;     /* Window GL relative screen mask 0 */
+	npireg_t smask0y;     /* Window GL relative screen mask 0 */
+	npireg_t _setup;
+	npireg_t _stepz;
+	npireg_t _lsrestore;
+	npireg_t _lssave;
+
+	unsigned int _pad1[0x30];
+
+	/* Iterators, full state for context switch */
+	npfreg_t _xstart;	/* X-start point (current) */
+	npfreg_t _ystart;	/* Y-start point (current) */
+	npfreg_t _xend;		/* x-end point */
+	npfreg_t _yend;		/* y-end point */
+	npireg_t xsave;		/* copy of xstart integer value for BLOCk addressing MODE */
+	npireg_t xymove;	/* x.y offset from xstart, ystart for relative operations */
+	npfreg_t bresd;
+	npfreg_t bress1;
+	npireg_t bresoctinc1;
+	volatile int bresrndinc2;
+	npireg_t brese1;
+	npireg_t bress2;
+	npireg_t aweight0;
+	npireg_t aweight1;
+	npfreg_t xstartf;
+	npfreg_t ystartf;
+	npfreg_t xendf;
+	npfreg_t yendf;
+	npireg_t xstarti;
+	npfreg_t xendf1;
+	npireg_t xystarti;
+	npireg_t xyendi;
+	npireg_t xstartendi;
+
+	unsigned int _unused2[0x29];
+
+	npfreg_t colorred;
+	npfreg_t coloralpha;
+	npfreg_t colorgrn;
+	npfreg_t colorblue;
+	npfreg_t slopered;
+	npfreg_t slopealpha;
+	npfreg_t slopegrn;
+	npfreg_t slopeblue;
+	npireg_t wrmask;
+	npireg_t colori;
+	npfreg_t colorx;
+	npfreg_t slopered1;
+	npireg_t hostrw0;
+	npireg_t hostrw1;
+	npireg_t dcbmode;
+#define NPORT_DMODE_WMASK   0x00000003
+#define NPORT_DMODE_W4      0x00000000
+#define NPORT_DMODE_W1      0x00000001
+#define NPORT_DMODE_W2      0x00000002
+#define NPORT_DMODE_W3      0x00000003
+#define NPORT_DMODE_EDPACK  0x00000004
+#define NPORT_DMODE_ECINC   0x00000008
+#define NPORT_DMODE_CMASK   0x00000070
+#define NPORT_DMODE_AMASK   0x00000780
+#define NPORT_DMODE_AVC2    0x00000000
+#define NPORT_DMODE_ACMALL  0x00000080
+#define NPORT_DMODE_ACM0    0x00000100
+#define NPORT_DMODE_ACM1    0x00000180
+#define NPORT_DMODE_AXMALL  0x00000200
+#define NPORT_DMODE_AXM0    0x00000280
+#define NPORT_DMODE_AXM1    0x00000300
+#define NPORT_DMODE_ABT     0x00000380
+#define NPORT_DMODE_AVCC1   0x00000400
+#define NPORT_DMODE_AVAB1   0x00000480
+#define NPORT_DMODE_ALG3V0  0x00000500
+#define NPORT_DMODE_A1562   0x00000580
+#define NPORT_DMODE_ESACK   0x00000800
+#define NPORT_DMODE_EASACK  0x00001000
+#define NPORT_DMODE_CWMASK  0x0003e000
+#define NPORT_DMODE_CHMASK  0x007c0000
+#define NPORT_DMODE_CSMASK  0x0f800000
+#define NPORT_DMODE_SENDIAN 0x10000000
+
+	unsigned int _unused3;
+
+	union np_dcb dcbdata0;
+	npireg_t dcbdata1;
+};
+
+struct newport_cregs {
+	npireg_t smask1x;
+	npireg_t smask1y;
+	npireg_t smask2x;
+	npireg_t smask2y;
+	npireg_t smask3x;
+	npireg_t smask3y;
+	npireg_t smask4x;
+	npireg_t smask4y;
+	npireg_t topscan;
+	npireg_t xywin;
+	npireg_t clipmode;
+#define NPORT_CMODE_SM0   0x00000001
+#define NPORT_CMODE_SM1   0x00000002
+#define NPORT_CMODE_SM2   0x00000004
+#define NPORT_CMODE_SM3   0x00000008
+#define NPORT_CMODE_SM4   0x00000010
+#define NPORT_CMODE_CMSK  0x00001e00
+
+	unsigned int _unused0;
+	unsigned int config;
+#define NPORT_CFG_G32MD   0x00000001
+#define NPORT_CFG_BWIDTH  0x00000002
+#define NPORT_CFG_ERCVR   0x00000004
+#define NPORT_CFG_BDMSK   0x00000078
+#define NPORT_CFG_BFAINT  0x00000080
+#define NPORT_CFG_GDMSK   0x00001f80
+#define NPORT_CFG_GD0     0x00000100
+#define NPORT_CFG_GD1     0x00000200
+#define NPORT_CFG_GD2     0x00000400
+#define NPORT_CFG_GD3     0x00000800
+#define NPORT_CFG_GD4     0x00001000
+#define NPORT_CFG_GFAINT  0x00002000
+#define NPORT_CFG_TOMSK   0x0001c000
+#define NPORT_CFG_VRMSK   0x000e0000
+#define NPORT_CFG_FBTYP   0x00100000
+
+	npireg_t _unused1;
+	npireg_t status;
+#define NPORT_STAT_VERS   0x00000007
+#define NPORT_STAT_GBUSY  0x00000008
+#define NPORT_STAT_BBUSY  0x00000010
+#define NPORT_STAT_VRINT  0x00000020
+#define NPORT_STAT_VIDINT 0x00000040
+#define NPORT_STAT_GLMSK  0x00001f80
+#define NPORT_STAT_BLMSK  0x0007e000
+#define NPORT_STAT_BFIRQ  0x00080000
+#define NPORT_STAT_GFIRQ  0x00100000
+
+	npireg_t ustatus;
+	npireg_t dcbreset;
+};
+
+struct newport_regs {
+	struct newport_rexregs set;
+	unsigned int _unused0[0x16e];
+	struct newport_rexregs go;
+	unsigned int _unused1[0x22e];
+	struct newport_cregs cset;
+	unsigned int _unused2[0x1ef];
+	struct newport_cregs cgo;
+};
+
+typedef struct {
+	unsigned int drawmode1;
+	unsigned int drawmode0;
+	unsigned int lsmode;   
+	unsigned int lspattern;
+	unsigned int lspatsave;
+	unsigned int zpattern; 
+	unsigned int colorback;
+	unsigned int colorvram;
+	unsigned int alpharef; 
+	unsigned int smask0x;  
+	unsigned int smask0y;  
+	unsigned int _xstart;  
+	unsigned int _ystart;  
+	unsigned int _xend;    
+	unsigned int _yend;    
+	unsigned int xsave;    
+	unsigned int xymove;   
+	unsigned int bresd;    
+	unsigned int bress1;   
+	unsigned int bresoctinc1;
+	unsigned int bresrndinc2;
+	unsigned int brese1;     
+	unsigned int bress2;     
+	
+	unsigned int aweight0;    
+	unsigned int aweight1;    
+	unsigned int colorred;    
+	unsigned int coloralpha;  
+	unsigned int colorgrn;    
+	unsigned int colorblue;   
+	unsigned int slopered;    
+	unsigned int slopealpha;  
+	unsigned int slopegrn;    
+	unsigned int slopeblue;   
+	unsigned int wrmask;      
+	unsigned int hostrw0;     
+	unsigned int hostrw1;     
+	
+        /* configregs */
+	
+	unsigned int smask1x;    
+	unsigned int smask1y;    
+	unsigned int smask2x;    
+	unsigned int smask2y;    
+	unsigned int smask3x;    
+	unsigned int smask3y;    
+	unsigned int smask4x;    
+	unsigned int smask4y;    
+	unsigned int topscan;    
+	unsigned int xywin;      
+	unsigned int clipmode;   
+	unsigned int config;     
+	
+        /* dcb registers */
+	unsigned int dcbmode;   
+	unsigned int dcbdata0;  
+	unsigned int dcbdata1;
+} newport_ctx;
+
+/* Reading/writing VC2 registers. */
+#define VC2_REGADDR_INDEX      0x00000000
+#define VC2_REGADDR_IREG       0x00000010
+#define VC2_REGADDR_RAM        0x00000030
+#define VC2_PROTOCOL           (NPORT_DMODE_EASACK | 0x00800000 | 0x00040000)
+
+#define VC2_VLINET_ADDR        0x000
+#define VC2_VFRAMET_ADDR       0x400
+#define VC2_CGLYPH_ADDR        0x500
+
+/* Now the Indexed registers of the VC2. */
+#define VC2_IREG_VENTRY        0x00
+#define VC2_IREG_CENTRY        0x01
+#define VC2_IREG_CURSX         0x02
+#define VC2_IREG_CURSY         0x03
+#define VC2_IREG_CCURSX        0x04
+#define VC2_IREG_DENTRY        0x05
+#define VC2_IREG_SLEN          0x06
+#define VC2_IREG_RADDR         0x07
+#define VC2_IREG_VFPTR         0x08
+#define VC2_IREG_VLSPTR        0x09
+#define VC2_IREG_VLIR          0x0a
+#define VC2_IREG_VLCTR         0x0b
+#define VC2_IREG_CTPTR         0x0c
+#define VC2_IREG_WCURSY        0x0d
+#define VC2_IREG_DFPTR         0x0e
+#define VC2_IREG_DLTPTR        0x0f
+#define VC2_IREG_CONTROL       0x10
+#define VC2_IREG_CONFIG        0x20
+
+static inline void newport_vc2_set(struct newport_regs *regs,
+				   unsigned char vc2ireg,
+				   unsigned short val)
+{
+	regs->set.dcbmode = (NPORT_DMODE_AVC2 | VC2_REGADDR_INDEX | NPORT_DMODE_W3 |
+			   NPORT_DMODE_ECINC | VC2_PROTOCOL);
+	regs->set.dcbdata0.byword = (vc2ireg << 24) | (val << 8);
+}
+
+static inline unsigned short newport_vc2_get(struct newport_regs *regs,
+					     unsigned char vc2ireg)
+{
+	regs->set.dcbmode = (NPORT_DMODE_AVC2 | VC2_REGADDR_INDEX | NPORT_DMODE_W1 |
+			   NPORT_DMODE_ECINC | VC2_PROTOCOL);
+	regs->set.dcbdata0.bybytes.b3 = vc2ireg;
+	regs->set.dcbmode = (NPORT_DMODE_AVC2 | VC2_REGADDR_IREG | NPORT_DMODE_W2 |
+			   NPORT_DMODE_ECINC | VC2_PROTOCOL);
+	return regs->set.dcbdata0.byshort.s1;
+}
+
+/* VC2 Control register bits */
+#define VC2_CTRL_EVIRQ     0x0001
+#define VC2_CTRL_EDISP     0x0002
+#define VC2_CTRL_EVIDEO    0x0004
+#define VC2_CTRL_EDIDS     0x0008
+#define VC2_CTRL_ECURS     0x0010
+#define VC2_CTRL_EGSYNC    0x0020
+#define VC2_CTRL_EILACE    0x0040
+#define VC2_CTRL_ECDISP    0x0080
+#define VC2_CTRL_ECCURS    0x0100
+#define VC2_CTRL_ECG64     0x0200
+#define VC2_CTRL_GLSEL     0x0400
+
+/* Controlling the color map on NEWPORT. */
+#define NCMAP_REGADDR_AREG   0x00000000
+#define NCMAP_REGADDR_ALO    0x00000000
+#define NCMAP_REGADDR_AHI    0x00000010
+#define NCMAP_REGADDR_PBUF   0x00000020
+#define NCMAP_REGADDR_CREG   0x00000030
+#define NCMAP_REGADDR_SREG   0x00000040
+#define NCMAP_REGADDR_RREG   0x00000060
+#define NCMAP_PROTOCOL       (0x00008000 | 0x00040000 | 0x00800000)
+
+static __inline__ void newport_cmap_setaddr(struct newport_regs *regs,
+					unsigned short addr)
+{
+	regs->set.dcbmode = (NPORT_DMODE_ACMALL | NCMAP_PROTOCOL |
+			   NPORT_DMODE_SENDIAN | NPORT_DMODE_ECINC |
+			   NCMAP_REGADDR_AREG | NPORT_DMODE_W2);
+	regs->set.dcbdata0.byshort.s1 = addr;
+	regs->set.dcbmode = (NPORT_DMODE_ACMALL | NCMAP_PROTOCOL |
+			   NCMAP_REGADDR_PBUF | NPORT_DMODE_W3);
+}
+
+static __inline__ void newport_cmap_setrgb(struct newport_regs *regs,
+				       unsigned char red,
+				       unsigned char green,
+				       unsigned char blue)
+{
+	regs->set.dcbdata0.byword =
+		(red << 24) |
+		(green << 16) |
+		(blue << 8);
+}
+
+/* Miscellaneous NEWPORT routines. */
+#define BUSY_TIMEOUT 100000
+static __inline__ int newport_wait(struct newport_regs *regs)
+{
+	int t = BUSY_TIMEOUT;
+
+	while (--t)
+		if (!(regs->cset.status & NPORT_STAT_GBUSY))
+			break;
+	return !t;
+}
+
+static __inline__ int newport_bfwait(struct newport_regs *regs)
+{
+	int t = BUSY_TIMEOUT;
+
+	while (--t)
+		if(!(regs->cset.status & NPORT_STAT_BBUSY))
+			break;
+	return !t;
+}
+
+/*
+ * DCBMODE register defines:
+ */
+
+/* Width of the data being transferred for each DCBDATA[01] word */
+#define DCB_DATAWIDTH_4 0x0
+#define DCB_DATAWIDTH_1 0x1
+#define DCB_DATAWIDTH_2 0x2
+#define DCB_DATAWIDTH_3 0x3
+
+/* If set, all of DCBDATA will be moved, otherwise only DATAWIDTH bytes */
+#define DCB_ENDATAPACK   (1 << 2)
+
+/* Enables DCBCRS auto increment after each DCB transfer */
+#define DCB_ENCRSINC     (1 << 3)
+
+/* shift for accessing the control register select address (DBCCRS, 3 bits) */
+#define DCB_CRS_SHIFT    4
+
+/* DCBADDR (4 bits): display bus slave address */
+#define DCB_ADDR_SHIFT   7
+#define DCB_VC2          (0 <<  DCB_ADDR_SHIFT)
+#define DCB_CMAP_ALL     (1 <<  DCB_ADDR_SHIFT)
+#define DCB_CMAP0        (2 <<  DCB_ADDR_SHIFT)
+#define DCB_CMAP1        (3 <<  DCB_ADDR_SHIFT)
+#define DCB_XMAP_ALL     (4 <<  DCB_ADDR_SHIFT)
+#define DCB_XMAP0        (5 <<  DCB_ADDR_SHIFT)
+#define DCB_XMAP1        (6 <<  DCB_ADDR_SHIFT)
+#define DCB_BT445        (7 <<  DCB_ADDR_SHIFT)
+#define DCB_VCC1         (8 <<  DCB_ADDR_SHIFT)
+#define DCB_VAB1         (9 <<  DCB_ADDR_SHIFT)
+#define DCB_LG3_BDVERS0  (10 << DCB_ADDR_SHIFT)
+#define DCB_LG3_ICS1562  (11 << DCB_ADDR_SHIFT)
+#define DCB_RESERVED     (15 << DCB_ADDR_SHIFT)
+
+/* DCB protocol ack types */
+#define DCB_ENSYNCACK    (1 << 11)
+#define DCB_ENASYNCACK   (1 << 12)
+
+#define DCB_CSWIDTH_SHIFT 13
+#define DCB_CSHOLD_SHIFT  18
+#define DCB_CSSETUP_SHIFT 23
+
+/* XMAP9 specific defines */
+/*   XMAP9 -- registers as seen on the DCBMODE register*/
+#   define XM9_CRS_CONFIG            (0 << DCB_CRS_SHIFT)
+#       define XM9_PUPMODE           (1 << 0)
+#       define XM9_ODD_PIXEL         (1 << 1)
+#       define XM9_8_BITPLANES       (1 << 2)
+#       define XM9_SLOW_DCB          (1 << 3)
+#       define XM9_VIDEO_RGBMAP_MASK (3 << 4)
+#       define XM9_EXPRESS_VIDEO     (1 << 6)
+#       define XM9_VIDEO_OPTION      (1 << 7)
+#   define XM9_CRS_REVISION          (1 << DCB_CRS_SHIFT)
+#   define XM9_CRS_FIFO_AVAIL        (2 << DCB_CRS_SHIFT)
+#       define XM9_FIFO_0_AVAIL      0
+#       define XM9_FIFO_1_AVAIL      1
+#       define XM9_FIFO_2_AVAIL      3
+#       define XM9_FIFO_3_AVAIL      2
+#       define XM9_FIFO_FULL         XM9_FIFO_0_AVAIL
+#       define XM9_FIFO_EMPTY        XM9_FIFO_3_AVAIL
+#   define XM9_CRS_CURS_CMAP_MSB     (3 << DCB_CRS_SHIFT)
+#   define XM9_CRS_PUP_CMAP_MSB      (4 << DCB_CRS_SHIFT)
+#   define XM9_CRS_MODE_REG_DATA     (5 << DCB_CRS_SHIFT)
+#   define XM9_CRS_MODE_REG_INDEX    (7 << DCB_CRS_SHIFT)
+
+
+#define DCB_CYCLES(setup,hold,width)                \
+                  ((hold << DCB_CSHOLD_SHIFT)  |    \
+		   (setup << DCB_CSSETUP_SHIFT)|    \
+		   (width << DCB_CSWIDTH_SHIFT))
+
+#define W_DCB_XMAP9_PROTOCOL       DCB_CYCLES (2, 1, 0)
+#define WSLOW_DCB_XMAP9_PROTOCOL   DCB_CYCLES (5, 5, 0)
+#define WAYSLOW_DCB_XMAP9_PROTOCOL DCB_CYCLES (12, 12, 0)
+#define R_DCB_XMAP9_PROTOCOL       DCB_CYCLES (2, 1, 3)
+
+static __inline__ void
+xmap9FIFOWait (struct newport_regs *rex)
+{
+        rex->set.dcbmode = DCB_XMAP0 | XM9_CRS_FIFO_AVAIL |
+		DCB_DATAWIDTH_1 | R_DCB_XMAP9_PROTOCOL;
+        newport_bfwait (rex);
+	
+        while ((rex->set.dcbdata0.bybytes.b3 & 3) != XM9_FIFO_EMPTY)
+		;
+}
+
+static __inline__ void
+xmap9SetModeReg (struct newport_regs *rex, unsigned int modereg, unsigned int data24, int cfreq)
+{
+        if (cfreq > 119)
+            rex->set.dcbmode = DCB_XMAP_ALL | XM9_CRS_MODE_REG_DATA |
+                        DCB_DATAWIDTH_4 | W_DCB_XMAP9_PROTOCOL;
+        else if (cfreq > 59)
+            rex->set.dcbmode = DCB_XMAP_ALL | XM9_CRS_MODE_REG_DATA |
+		    DCB_DATAWIDTH_4 | WSLOW_DCB_XMAP9_PROTOCOL;    
+        else
+            rex->set.dcbmode = DCB_XMAP_ALL | XM9_CRS_MODE_REG_DATA |
+                        DCB_DATAWIDTH_4 | WAYSLOW_DCB_XMAP9_PROTOCOL; 
+        rex->set.dcbdata0.byword = ((modereg) << 24) | (data24 & 0xffffff);
+}
+
+#define BT445_PROTOCOL		DCB_CYCLES(1,1,3)
+
+#define BT445_CSR_ADDR_REG	(0 << DCB_CRS_SHIFT)
+#define BT445_CSR_REVISION	(2 << DCB_CRS_SHIFT)
+
+#define BT445_REVISION_REG	0x01
+
+#endif /* !(_SGI_NEWPORT_H) */
+
diff --git a/include/video/omap-panel-dvi.h b/include/video/omap-panel-dvi.h
new file mode 100644
index 00000000..87ad567b
--- /dev/null
+++ b/include/video/omap-panel-dvi.h
@@ -0,0 +1,37 @@
+/*
+ * Header for DVI output driver
+ *
+ * Copyright (C) 2011 Texas Instruments Inc
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __OMAP_PANEL_DVI_H
+#define __OMAP_PANEL_DVI_H
+
+struct omap_dss_device;
+
+/**
+ * struct panel_dvi_platform_data - panel driver configuration data
+ * @platform_enable: platform specific panel enable function
+ * @platform_disable: platform specific panel disable function
+ * @i2c_bus_num: i2c bus id for the panel
+ */
+struct panel_dvi_platform_data {
+	int (*platform_enable)(struct omap_dss_device *dssdev);
+	void (*platform_disable)(struct omap_dss_device *dssdev);
+	u16 i2c_bus_num;
+};
+
+#endif /* __OMAP_PANEL_DVI_H */
diff --git a/include/video/omap-panel-generic-dpi.h b/include/video/omap-panel-generic-dpi.h
new file mode 100644
index 00000000..127e3f20
--- /dev/null
+++ b/include/video/omap-panel-generic-dpi.h
@@ -0,0 +1,37 @@
+/*
+ * Header for generic DPI panel driver
+ *
+ * Copyright (C) 2010 Canonical Ltd.
+ * Author: Bryan Wu <bryan.wu@canonical.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __OMAP_PANEL_GENERIC_DPI_H
+#define __OMAP_PANEL_GENERIC_DPI_H
+
+struct omap_dss_device;
+
+/**
+ * struct panel_generic_dpi_data - panel driver configuration data
+ * @name: panel name
+ * @platform_enable: platform specific panel enable function
+ * @platform_disable: platform specific panel disable function
+ */
+struct panel_generic_dpi_data {
+	const char *name;
+	int (*platform_enable)(struct omap_dss_device *dssdev);
+	void (*platform_disable)(struct omap_dss_device *dssdev);
+};
+
+#endif /* __OMAP_PANEL_GENERIC_DPI_H */
diff --git a/include/video/omap-panel-n8x0.h b/include/video/omap-panel-n8x0.h
new file mode 100644
index 00000000..50a1302e
--- /dev/null
+++ b/include/video/omap-panel-n8x0.h
@@ -0,0 +1,15 @@
+#ifndef __OMAP_PANEL_N8X0_H
+#define __OMAP_PANEL_N8X0_H
+
+struct omap_dss_device;
+
+struct panel_n8x0_data {
+	int (*platform_enable)(struct omap_dss_device *dssdev);
+	void (*platform_disable)(struct omap_dss_device *dssdev);
+	int panel_reset;
+	int ctrl_pwrdown;
+
+	int (*set_backlight)(struct omap_dss_device *dssdev, int level);
+};
+
+#endif
diff --git a/include/video/omap-panel-nokia-dsi.h b/include/video/omap-panel-nokia-dsi.h
new file mode 100644
index 00000000..7dc71f9c
--- /dev/null
+++ b/include/video/omap-panel-nokia-dsi.h
@@ -0,0 +1,29 @@
+#ifndef __OMAP_NOKIA_DSI_PANEL_H
+#define __OMAP_NOKIA_DSI_PANEL_H
+
+struct omap_dss_device;
+
+/**
+ * struct nokia_dsi_panel_data - Nokia DSI panel driver configuration
+ * @name: panel name
+ * @use_ext_te: use external TE
+ * @ext_te_gpio: external TE GPIO
+ * @esd_interval: interval of ESD checks, 0 = disabled (ms)
+ * @ulps_timeout: time to wait before entering ULPS, 0 = disabled (ms)
+ * @use_dsi_backlight: true if panel uses DSI command to control backlight
+ */
+struct nokia_dsi_panel_data {
+	const char *name;
+
+	int reset_gpio;
+
+	bool use_ext_te;
+	int ext_te_gpio;
+
+	unsigned esd_interval;
+	unsigned ulps_timeout;
+
+	bool use_dsi_backlight;
+};
+
+#endif /* __OMAP_NOKIA_DSI_PANEL_H */
diff --git a/include/video/omap-panel-picodlp.h b/include/video/omap-panel-picodlp.h
new file mode 100644
index 00000000..1c342ef6
--- /dev/null
+++ b/include/video/omap-panel-picodlp.h
@@ -0,0 +1,23 @@
+/*
+ * panel data for picodlp panel
+ *
+ * Copyright (C) 2011 Texas Instruments
+ *
+ * Author: Mayuresh Janorkar <mayur@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __PANEL_PICODLP_H
+#define __PANEL_PICODLP_H
+/**
+ * struct : picodlp panel data
+ * picodlp_adapter_id:	i2c_adapter number for picodlp
+ */
+struct picodlp_panel_data {
+	int picodlp_adapter_id;
+	int emu_done_gpio;
+	int pwrgood_gpio;
+};
+#endif /* __PANEL_PICODLP_H */
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
new file mode 100644
index 00000000..483f67ca
--- /dev/null
+++ b/include/video/omapdss.h
@@ -0,0 +1,715 @@
+/*
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __OMAP_OMAPDSS_H
+#define __OMAP_OMAPDSS_H
+
+#include <linux/list.h>
+#include <linux/kobject.h>
+#include <linux/device.h>
+
+#define DISPC_IRQ_FRAMEDONE		(1 << 0)
+#define DISPC_IRQ_VSYNC			(1 << 1)
+#define DISPC_IRQ_EVSYNC_EVEN		(1 << 2)
+#define DISPC_IRQ_EVSYNC_ODD		(1 << 3)
+#define DISPC_IRQ_ACBIAS_COUNT_STAT	(1 << 4)
+#define DISPC_IRQ_PROG_LINE_NUM		(1 << 5)
+#define DISPC_IRQ_GFX_FIFO_UNDERFLOW	(1 << 6)
+#define DISPC_IRQ_GFX_END_WIN		(1 << 7)
+#define DISPC_IRQ_PAL_GAMMA_MASK	(1 << 8)
+#define DISPC_IRQ_OCP_ERR		(1 << 9)
+#define DISPC_IRQ_VID1_FIFO_UNDERFLOW	(1 << 10)
+#define DISPC_IRQ_VID1_END_WIN		(1 << 11)
+#define DISPC_IRQ_VID2_FIFO_UNDERFLOW	(1 << 12)
+#define DISPC_IRQ_VID2_END_WIN		(1 << 13)
+#define DISPC_IRQ_SYNC_LOST		(1 << 14)
+#define DISPC_IRQ_SYNC_LOST_DIGIT	(1 << 15)
+#define DISPC_IRQ_WAKEUP		(1 << 16)
+#define DISPC_IRQ_SYNC_LOST2		(1 << 17)
+#define DISPC_IRQ_VSYNC2		(1 << 18)
+#define DISPC_IRQ_VID3_END_WIN		(1 << 19)
+#define DISPC_IRQ_VID3_FIFO_UNDERFLOW	(1 << 20)
+#define DISPC_IRQ_ACBIAS_COUNT_STAT2	(1 << 21)
+#define DISPC_IRQ_FRAMEDONE2		(1 << 22)
+#define DISPC_IRQ_FRAMEDONEWB		(1 << 23)
+#define DISPC_IRQ_FRAMEDONETV		(1 << 24)
+#define DISPC_IRQ_WBBUFFEROVERFLOW	(1 << 25)
+
+struct omap_dss_device;
+struct omap_overlay_manager;
+
+enum omap_display_type {
+	OMAP_DISPLAY_TYPE_NONE		= 0,
+	OMAP_DISPLAY_TYPE_DPI		= 1 << 0,
+	OMAP_DISPLAY_TYPE_DBI		= 1 << 1,
+	OMAP_DISPLAY_TYPE_SDI		= 1 << 2,
+	OMAP_DISPLAY_TYPE_DSI		= 1 << 3,
+	OMAP_DISPLAY_TYPE_VENC		= 1 << 4,
+	OMAP_DISPLAY_TYPE_HDMI		= 1 << 5,
+};
+
+enum omap_plane {
+	OMAP_DSS_GFX	= 0,
+	OMAP_DSS_VIDEO1	= 1,
+	OMAP_DSS_VIDEO2	= 2,
+	OMAP_DSS_VIDEO3	= 3,
+};
+
+enum omap_channel {
+	OMAP_DSS_CHANNEL_LCD	= 0,
+	OMAP_DSS_CHANNEL_DIGIT	= 1,
+	OMAP_DSS_CHANNEL_LCD2	= 2,
+};
+
+enum omap_color_mode {
+	OMAP_DSS_COLOR_CLUT1	= 1 << 0,  /* BITMAP 1 */
+	OMAP_DSS_COLOR_CLUT2	= 1 << 1,  /* BITMAP 2 */
+	OMAP_DSS_COLOR_CLUT4	= 1 << 2,  /* BITMAP 4 */
+	OMAP_DSS_COLOR_CLUT8	= 1 << 3,  /* BITMAP 8 */
+	OMAP_DSS_COLOR_RGB12U	= 1 << 4,  /* RGB12, 16-bit container */
+	OMAP_DSS_COLOR_ARGB16	= 1 << 5,  /* ARGB16 */
+	OMAP_DSS_COLOR_RGB16	= 1 << 6,  /* RGB16 */
+	OMAP_DSS_COLOR_RGB24U	= 1 << 7,  /* RGB24, 32-bit container */
+	OMAP_DSS_COLOR_RGB24P	= 1 << 8,  /* RGB24, 24-bit container */
+	OMAP_DSS_COLOR_YUV2	= 1 << 9,  /* YUV2 4:2:2 co-sited */
+	OMAP_DSS_COLOR_UYVY	= 1 << 10, /* UYVY 4:2:2 co-sited */
+	OMAP_DSS_COLOR_ARGB32	= 1 << 11, /* ARGB32 */
+	OMAP_DSS_COLOR_RGBA32	= 1 << 12, /* RGBA32 */
+	OMAP_DSS_COLOR_RGBX32	= 1 << 13, /* RGBx32 */
+	OMAP_DSS_COLOR_NV12		= 1 << 14, /* NV12 format: YUV 4:2:0 */
+	OMAP_DSS_COLOR_RGBA16		= 1 << 15, /* RGBA16 - 4444 */
+	OMAP_DSS_COLOR_RGBX16		= 1 << 16, /* RGBx16 - 4444 */
+	OMAP_DSS_COLOR_ARGB16_1555	= 1 << 17, /* ARGB16 - 1555 */
+	OMAP_DSS_COLOR_XRGB16_1555	= 1 << 18, /* xRGB16 - 1555 */
+};
+
+enum omap_lcd_display_type {
+	OMAP_DSS_LCD_DISPLAY_STN,
+	OMAP_DSS_LCD_DISPLAY_TFT,
+};
+
+enum omap_dss_load_mode {
+	OMAP_DSS_LOAD_CLUT_AND_FRAME	= 0,
+	OMAP_DSS_LOAD_CLUT_ONLY		= 1,
+	OMAP_DSS_LOAD_FRAME_ONLY	= 2,
+	OMAP_DSS_LOAD_CLUT_ONCE_FRAME	= 3,
+};
+
+enum omap_dss_trans_key_type {
+	OMAP_DSS_COLOR_KEY_GFX_DST = 0,
+	OMAP_DSS_COLOR_KEY_VID_SRC = 1,
+};
+
+enum omap_rfbi_te_mode {
+	OMAP_DSS_RFBI_TE_MODE_1 = 1,
+	OMAP_DSS_RFBI_TE_MODE_2 = 2,
+};
+
+enum omap_panel_config {
+	OMAP_DSS_LCD_IVS		= 1<<0,
+	OMAP_DSS_LCD_IHS		= 1<<1,
+	OMAP_DSS_LCD_IPC		= 1<<2,
+	OMAP_DSS_LCD_IEO		= 1<<3,
+	OMAP_DSS_LCD_RF			= 1<<4,
+	OMAP_DSS_LCD_ONOFF		= 1<<5,
+
+	OMAP_DSS_LCD_TFT		= 1<<20,
+};
+
+enum omap_dss_venc_type {
+	OMAP_DSS_VENC_TYPE_COMPOSITE,
+	OMAP_DSS_VENC_TYPE_SVIDEO,
+};
+
+enum omap_dss_dsi_pixel_format {
+	OMAP_DSS_DSI_FMT_RGB888,
+	OMAP_DSS_DSI_FMT_RGB666,
+	OMAP_DSS_DSI_FMT_RGB666_PACKED,
+	OMAP_DSS_DSI_FMT_RGB565,
+};
+
+enum omap_dss_dsi_mode {
+	OMAP_DSS_DSI_CMD_MODE = 0,
+	OMAP_DSS_DSI_VIDEO_MODE,
+};
+
+enum omap_display_caps {
+	OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE	= 1 << 0,
+	OMAP_DSS_DISPLAY_CAP_TEAR_ELIM		= 1 << 1,
+};
+
+enum omap_dss_display_state {
+	OMAP_DSS_DISPLAY_DISABLED = 0,
+	OMAP_DSS_DISPLAY_ACTIVE,
+	OMAP_DSS_DISPLAY_SUSPENDED,
+};
+
+/* XXX perhaps this should be removed */
+enum omap_dss_overlay_managers {
+	OMAP_DSS_OVL_MGR_LCD,
+	OMAP_DSS_OVL_MGR_TV,
+	OMAP_DSS_OVL_MGR_LCD2,
+};
+
+enum omap_dss_rotation_type {
+	OMAP_DSS_ROT_DMA = 0,
+	OMAP_DSS_ROT_VRFB = 1,
+};
+
+/* clockwise rotation angle */
+enum omap_dss_rotation_angle {
+	OMAP_DSS_ROT_0   = 0,
+	OMAP_DSS_ROT_90  = 1,
+	OMAP_DSS_ROT_180 = 2,
+	OMAP_DSS_ROT_270 = 3,
+};
+
+enum omap_overlay_caps {
+	OMAP_DSS_OVL_CAP_SCALE = 1 << 0,
+	OMAP_DSS_OVL_CAP_GLOBAL_ALPHA = 1 << 1,
+	OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA = 1 << 2,
+	OMAP_DSS_OVL_CAP_ZORDER = 1 << 3,
+};
+
+enum omap_overlay_manager_caps {
+	OMAP_DSS_DUMMY_VALUE, /* add a dummy value to prevent compiler error */
+};
+
+enum omap_dss_clk_source {
+	OMAP_DSS_CLK_SRC_FCK = 0,		/* OMAP2/3: DSS1_ALWON_FCLK
+						 * OMAP4: DSS_FCLK */
+	OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC,	/* OMAP3: DSI1_PLL_FCLK
+						 * OMAP4: PLL1_CLK1 */
+	OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI,	/* OMAP3: DSI2_PLL_FCLK
+						 * OMAP4: PLL1_CLK2 */
+	OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC,	/* OMAP4: PLL2_CLK1 */
+	OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DSI,	/* OMAP4: PLL2_CLK2 */
+};
+
+enum omap_hdmi_flags {
+	OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP = 1 << 0,
+};
+
+/* RFBI */
+
+struct rfbi_timings {
+	int cs_on_time;
+	int cs_off_time;
+	int we_on_time;
+	int we_off_time;
+	int re_on_time;
+	int re_off_time;
+	int we_cycle_time;
+	int re_cycle_time;
+	int cs_pulse_width;
+	int access_time;
+
+	int clk_div;
+
+	u32 tim[5];             /* set by rfbi_convert_timings() */
+
+	int converted;
+};
+
+void omap_rfbi_write_command(const void *buf, u32 len);
+void omap_rfbi_read_data(void *buf, u32 len);
+void omap_rfbi_write_data(const void *buf, u32 len);
+void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width,
+		u16 x, u16 y,
+		u16 w, u16 h);
+int omap_rfbi_enable_te(bool enable, unsigned line);
+int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode,
+			     unsigned hs_pulse_time, unsigned vs_pulse_time,
+			     int hs_pol_inv, int vs_pol_inv, int extif_div);
+void rfbi_bus_lock(void);
+void rfbi_bus_unlock(void);
+
+/* DSI */
+
+struct omap_dss_dsi_videomode_data {
+	/* DSI video mode blanking data */
+	/* Unit: byte clock cycles */
+	u16 hsa;
+	u16 hfp;
+	u16 hbp;
+	/* Unit: line clocks */
+	u16 vsa;
+	u16 vfp;
+	u16 vbp;
+
+	/* DSI blanking modes */
+	int blanking_mode;
+	int hsa_blanking_mode;
+	int hbp_blanking_mode;
+	int hfp_blanking_mode;
+
+	/* Video port sync events */
+	int vp_de_pol;
+	int vp_hsync_pol;
+	int vp_vsync_pol;
+	bool vp_vsync_end;
+	bool vp_hsync_end;
+
+	bool ddr_clk_always_on;
+	int window_sync;
+};
+
+void dsi_bus_lock(struct omap_dss_device *dssdev);
+void dsi_bus_unlock(struct omap_dss_device *dssdev);
+int dsi_vc_dcs_write(struct omap_dss_device *dssdev, int channel, u8 *data,
+		int len);
+int dsi_vc_generic_write(struct omap_dss_device *dssdev, int channel, u8 *data,
+		int len);
+int dsi_vc_dcs_write_0(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd);
+int dsi_vc_generic_write_0(struct omap_dss_device *dssdev, int channel);
+int dsi_vc_dcs_write_1(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd,
+		u8 param);
+int dsi_vc_generic_write_1(struct omap_dss_device *dssdev, int channel,
+		u8 param);
+int dsi_vc_generic_write_2(struct omap_dss_device *dssdev, int channel,
+		u8 param1, u8 param2);
+int dsi_vc_dcs_write_nosync(struct omap_dss_device *dssdev, int channel,
+		u8 *data, int len);
+int dsi_vc_generic_write_nosync(struct omap_dss_device *dssdev, int channel,
+		u8 *data, int len);
+int dsi_vc_dcs_read(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd,
+		u8 *buf, int buflen);
+int dsi_vc_generic_read_0(struct omap_dss_device *dssdev, int channel, u8 *buf,
+		int buflen);
+int dsi_vc_generic_read_1(struct omap_dss_device *dssdev, int channel, u8 param,
+		u8 *buf, int buflen);
+int dsi_vc_generic_read_2(struct omap_dss_device *dssdev, int channel,
+		u8 param1, u8 param2, u8 *buf, int buflen);
+int dsi_vc_set_max_rx_packet_size(struct omap_dss_device *dssdev, int channel,
+		u16 len);
+int dsi_vc_send_null(struct omap_dss_device *dssdev, int channel);
+int dsi_vc_send_bta_sync(struct omap_dss_device *dssdev, int channel);
+int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel);
+void dsi_disable_video_output(struct omap_dss_device *dssdev, int channel);
+
+/* Board specific data */
+struct omap_dss_board_info {
+	int (*get_context_loss_count)(struct device *dev);
+	int num_devices;
+	struct omap_dss_device **devices;
+	struct omap_dss_device *default_device;
+	int (*dsi_enable_pads)(int dsi_id, unsigned lane_mask);
+	void (*dsi_disable_pads)(int dsi_id, unsigned lane_mask);
+};
+
+/* Init with the board info */
+extern int omap_display_init(struct omap_dss_board_info *board_data);
+/* HDMI mux init*/
+extern int omap_hdmi_init(enum omap_hdmi_flags flags);
+
+struct omap_display_platform_data {
+	struct omap_dss_board_info *board_data;
+	/* TODO: Additional members to be added when PM is considered */
+};
+
+struct omap_video_timings {
+	/* Unit: pixels */
+	u16 x_res;
+	/* Unit: pixels */
+	u16 y_res;
+	/* Unit: KHz */
+	u32 pixel_clock;
+	/* Unit: pixel clocks */
+	u16 hsw;	/* Horizontal synchronization pulse width */
+	/* Unit: pixel clocks */
+	u16 hfp;	/* Horizontal front porch */
+	/* Unit: pixel clocks */
+	u16 hbp;	/* Horizontal back porch */
+	/* Unit: line clocks */
+	u16 vsw;	/* Vertical synchronization pulse width */
+	/* Unit: line clocks */
+	u16 vfp;	/* Vertical front porch */
+	/* Unit: line clocks */
+	u16 vbp;	/* Vertical back porch */
+};
+
+#ifdef CONFIG_OMAP2_DSS_VENC
+/* Hardcoded timings for tv modes. Venc only uses these to
+ * identify the mode, and does not actually use the configs
+ * itself. However, the configs should be something that
+ * a normal monitor can also show */
+extern const struct omap_video_timings omap_dss_pal_timings;
+extern const struct omap_video_timings omap_dss_ntsc_timings;
+#endif
+
+struct omap_dss_cpr_coefs {
+	s16 rr, rg, rb;
+	s16 gr, gg, gb;
+	s16 br, bg, bb;
+};
+
+struct omap_overlay_info {
+	u32 paddr;
+	u32 p_uv_addr;  /* for NV12 format */
+	u16 screen_width;
+	u16 width;
+	u16 height;
+	enum omap_color_mode color_mode;
+	u8 rotation;
+	enum omap_dss_rotation_type rotation_type;
+	bool mirror;
+
+	u16 pos_x;
+	u16 pos_y;
+	u16 out_width;	/* if 0, out_width == width */
+	u16 out_height;	/* if 0, out_height == height */
+	u8 global_alpha;
+	u8 pre_mult_alpha;
+	u8 zorder;
+};
+
+struct omap_overlay {
+	struct kobject kobj;
+	struct list_head list;
+
+	/* static fields */
+	const char *name;
+	enum omap_plane id;
+	enum omap_color_mode supported_modes;
+	enum omap_overlay_caps caps;
+
+	/* dynamic fields */
+	struct omap_overlay_manager *manager;
+
+	/*
+	 * The following functions do not block:
+	 *
+	 * is_enabled
+	 * set_overlay_info
+	 * get_overlay_info
+	 *
+	 * The rest of the functions may block and cannot be called from
+	 * interrupt context
+	 */
+
+	int (*enable)(struct omap_overlay *ovl);
+	int (*disable)(struct omap_overlay *ovl);
+	bool (*is_enabled)(struct omap_overlay *ovl);
+
+	int (*set_manager)(struct omap_overlay *ovl,
+		struct omap_overlay_manager *mgr);
+	int (*unset_manager)(struct omap_overlay *ovl);
+
+	int (*set_overlay_info)(struct omap_overlay *ovl,
+			struct omap_overlay_info *info);
+	void (*get_overlay_info)(struct omap_overlay *ovl,
+			struct omap_overlay_info *info);
+
+	int (*wait_for_go)(struct omap_overlay *ovl);
+};
+
+struct omap_overlay_manager_info {
+	u32 default_color;
+
+	enum omap_dss_trans_key_type trans_key_type;
+	u32 trans_key;
+	bool trans_enabled;
+
+	bool partial_alpha_enabled;
+
+	bool cpr_enable;
+	struct omap_dss_cpr_coefs cpr_coefs;
+};
+
+struct omap_overlay_manager {
+	struct kobject kobj;
+
+	/* static fields */
+	const char *name;
+	enum omap_channel id;
+	enum omap_overlay_manager_caps caps;
+	struct list_head overlays;
+	enum omap_display_type supported_displays;
+
+	/* dynamic fields */
+	struct omap_dss_device *device;
+
+	/*
+	 * The following functions do not block:
+	 *
+	 * set_manager_info
+	 * get_manager_info
+	 * apply
+	 *
+	 * The rest of the functions may block and cannot be called from
+	 * interrupt context
+	 */
+
+	int (*set_device)(struct omap_overlay_manager *mgr,
+		struct omap_dss_device *dssdev);
+	int (*unset_device)(struct omap_overlay_manager *mgr);
+
+	int (*set_manager_info)(struct omap_overlay_manager *mgr,
+			struct omap_overlay_manager_info *info);
+	void (*get_manager_info)(struct omap_overlay_manager *mgr,
+			struct omap_overlay_manager_info *info);
+
+	int (*apply)(struct omap_overlay_manager *mgr);
+	int (*wait_for_go)(struct omap_overlay_manager *mgr);
+	int (*wait_for_vsync)(struct omap_overlay_manager *mgr);
+};
+
+struct omap_dss_device {
+	struct device dev;
+
+	enum omap_display_type type;
+
+	enum omap_channel channel;
+
+	union {
+		struct {
+			u8 data_lines;
+		} dpi;
+
+		struct {
+			u8 channel;
+			u8 data_lines;
+		} rfbi;
+
+		struct {
+			u8 datapairs;
+		} sdi;
+
+		struct {
+			u8 clk_lane;
+			u8 clk_pol;
+			u8 data1_lane;
+			u8 data1_pol;
+			u8 data2_lane;
+			u8 data2_pol;
+			u8 data3_lane;
+			u8 data3_pol;
+			u8 data4_lane;
+			u8 data4_pol;
+
+			int module;
+
+			bool ext_te;
+			u8 ext_te_gpio;
+		} dsi;
+
+		struct {
+			enum omap_dss_venc_type type;
+			bool invert_polarity;
+		} venc;
+	} phy;
+
+	struct {
+		struct {
+			struct {
+				u16 lck_div;
+				u16 pck_div;
+				enum omap_dss_clk_source lcd_clk_src;
+			} channel;
+
+			enum omap_dss_clk_source dispc_fclk_src;
+		} dispc;
+
+		struct {
+			/* regn is one greater than TRM's REGN value */
+			u16 regn;
+			u16 regm;
+			u16 regm_dispc;
+			u16 regm_dsi;
+
+			u16 lp_clk_div;
+			enum omap_dss_clk_source dsi_fclk_src;
+		} dsi;
+
+		struct {
+			/* regn is one greater than TRM's REGN value */
+			u16 regn;
+			u16 regm2;
+		} hdmi;
+	} clocks;
+
+	struct {
+		struct omap_video_timings timings;
+
+		int acbi;	/* ac-bias pin transitions per interrupt */
+		/* Unit: line clocks */
+		int acb;	/* ac-bias pin frequency */
+
+		enum omap_panel_config config;
+
+		enum omap_dss_dsi_pixel_format dsi_pix_fmt;
+		enum omap_dss_dsi_mode dsi_mode;
+		struct omap_dss_dsi_videomode_data dsi_vm_data;
+	} panel;
+
+	struct {
+		u8 pixel_size;
+		struct rfbi_timings rfbi_timings;
+	} ctrl;
+
+	int reset_gpio;
+
+	int max_backlight_level;
+
+	const char *name;
+
+	/* used to match device to driver */
+	const char *driver_name;
+
+	void *data;
+
+	struct omap_dss_driver *driver;
+
+	/* helper variable for driver suspend/resume */
+	bool activate_after_resume;
+
+	enum omap_display_caps caps;
+
+	struct omap_overlay_manager *manager;
+
+	enum omap_dss_display_state state;
+
+	/* platform specific  */
+	int (*platform_enable)(struct omap_dss_device *dssdev);
+	void (*platform_disable)(struct omap_dss_device *dssdev);
+	int (*set_backlight)(struct omap_dss_device *dssdev, int level);
+	int (*get_backlight)(struct omap_dss_device *dssdev);
+};
+
+struct omap_dss_hdmi_data
+{
+	int hpd_gpio;
+};
+
+struct omap_dss_driver {
+	struct device_driver driver;
+
+	int (*probe)(struct omap_dss_device *);
+	void (*remove)(struct omap_dss_device *);
+
+	int (*enable)(struct omap_dss_device *display);
+	void (*disable)(struct omap_dss_device *display);
+	int (*suspend)(struct omap_dss_device *display);
+	int (*resume)(struct omap_dss_device *display);
+	int (*run_test)(struct omap_dss_device *display, int test);
+
+	int (*update)(struct omap_dss_device *dssdev,
+			       u16 x, u16 y, u16 w, u16 h);
+	int (*sync)(struct omap_dss_device *dssdev);
+
+	int (*enable_te)(struct omap_dss_device *dssdev, bool enable);
+	int (*get_te)(struct omap_dss_device *dssdev);
+
+	u8 (*get_rotate)(struct omap_dss_device *dssdev);
+	int (*set_rotate)(struct omap_dss_device *dssdev, u8 rotate);
+
+	bool (*get_mirror)(struct omap_dss_device *dssdev);
+	int (*set_mirror)(struct omap_dss_device *dssdev, bool enable);
+
+	int (*memory_read)(struct omap_dss_device *dssdev,
+			void *buf, size_t size,
+			u16 x, u16 y, u16 w, u16 h);
+
+	void (*get_resolution)(struct omap_dss_device *dssdev,
+			u16 *xres, u16 *yres);
+	void (*get_dimensions)(struct omap_dss_device *dssdev,
+			u32 *width, u32 *height);
+	int (*get_recommended_bpp)(struct omap_dss_device *dssdev);
+
+	int (*check_timings)(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings);
+	void (*set_timings)(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings);
+	void (*get_timings)(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings);
+
+	int (*set_wss)(struct omap_dss_device *dssdev, u32 wss);
+	u32 (*get_wss)(struct omap_dss_device *dssdev);
+
+	int (*read_edid)(struct omap_dss_device *dssdev, u8 *buf, int len);
+	bool (*detect)(struct omap_dss_device *dssdev);
+};
+
+int omap_dss_register_driver(struct omap_dss_driver *);
+void omap_dss_unregister_driver(struct omap_dss_driver *);
+
+void omap_dss_get_device(struct omap_dss_device *dssdev);
+void omap_dss_put_device(struct omap_dss_device *dssdev);
+#define for_each_dss_dev(d) while ((d = omap_dss_get_next_device(d)) != NULL)
+struct omap_dss_device *omap_dss_get_next_device(struct omap_dss_device *from);
+struct omap_dss_device *omap_dss_find_device(void *data,
+		int (*match)(struct omap_dss_device *dssdev, void *data));
+
+int omap_dss_start_device(struct omap_dss_device *dssdev);
+void omap_dss_stop_device(struct omap_dss_device *dssdev);
+
+int omap_dss_get_num_overlay_managers(void);
+struct omap_overlay_manager *omap_dss_get_overlay_manager(int num);
+
+int omap_dss_get_num_overlays(void);
+struct omap_overlay *omap_dss_get_overlay(int num);
+
+void omapdss_default_get_resolution(struct omap_dss_device *dssdev,
+		u16 *xres, u16 *yres);
+int omapdss_default_get_recommended_bpp(struct omap_dss_device *dssdev);
+
+typedef void (*omap_dispc_isr_t) (void *arg, u32 mask);
+int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask);
+int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask);
+
+int omap_dispc_wait_for_irq_timeout(u32 irqmask, unsigned long timeout);
+int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask,
+		unsigned long timeout);
+
+#define to_dss_driver(x) container_of((x), struct omap_dss_driver, driver)
+#define to_dss_device(x) container_of((x), struct omap_dss_device, dev)
+
+void omapdss_dsi_vc_enable_hs(struct omap_dss_device *dssdev, int channel,
+		bool enable);
+int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable);
+
+int omap_dsi_update(struct omap_dss_device *dssdev, int channel,
+		void (*callback)(int, void *), void *data);
+int omap_dsi_request_vc(struct omap_dss_device *dssdev, int *channel);
+int omap_dsi_set_vc_id(struct omap_dss_device *dssdev, int channel, int vc_id);
+void omap_dsi_release_vc(struct omap_dss_device *dssdev, int channel);
+
+int omapdss_dsi_display_enable(struct omap_dss_device *dssdev);
+void omapdss_dsi_display_disable(struct omap_dss_device *dssdev,
+		bool disconnect_lanes, bool enter_ulps);
+
+int omapdss_dpi_display_enable(struct omap_dss_device *dssdev);
+void omapdss_dpi_display_disable(struct omap_dss_device *dssdev);
+void dpi_set_timings(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings);
+int dpi_check_timings(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings);
+
+int omapdss_sdi_display_enable(struct omap_dss_device *dssdev);
+void omapdss_sdi_display_disable(struct omap_dss_device *dssdev);
+
+int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev);
+void omapdss_rfbi_display_disable(struct omap_dss_device *dssdev);
+int omap_rfbi_prepare_update(struct omap_dss_device *dssdev,
+		u16 *x, u16 *y, u16 *w, u16 *h);
+int omap_rfbi_update(struct omap_dss_device *dssdev,
+		u16 x, u16 y, u16 w, u16 h,
+		void (*callback)(void *), void *data);
+int omap_rfbi_configure(struct omap_dss_device *dssdev, int pixel_size,
+		int data_lines);
+
+#endif
diff --git a/include/video/permedia2.h b/include/video/permedia2.h
new file mode 100644
index 00000000..9ce9adbf
--- /dev/null
+++ b/include/video/permedia2.h
@@ -0,0 +1,254 @@
+/*
+ * Permedia2 framebuffer driver definitions.
+ * Copyright (c) 1998-2000 Ilario Nardinocchi (nardinoc@CS.UniBO.IT)
+ * --------------------------------------------------------------------------
+ * $Id: pm2fb.h,v 1.26 2000/09/19 00:11:53 illo Exp $
+ * --------------------------------------------------------------------------
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef PM2FB_H
+#define PM2FB_H
+
+#define PM2_REFERENCE_CLOCK	14318			/* in KHz */
+#define PM2_MAX_PIXCLOCK	230000			/* in KHz */
+#define PM2_REGS_SIZE		0x10000
+
+#define PM2TAG(r) (u32 )(((r)-0x8000)>>3)
+
+/*****************************************************************************
+ * Permedia2 registers used in the framebuffer
+ *****************************************************************************/
+ 
+#define PM2R_RESET_STATUS				0x0000
+#define PM2R_IN_FIFO_SPACE				0x0018
+#define PM2R_OUT_FIFO_WORDS				0x0020
+#define PM2R_APERTURE_ONE				0x0050
+#define PM2R_APERTURE_TWO				0x0058
+#define PM2R_FIFO_DISCON				0x0068
+#define PM2R_CHIP_CONFIG				0x0070
+
+#define PM2R_REBOOT					0x1000
+#define PM2R_MEM_CONTROL				0x1040
+#define PM2R_BOOT_ADDRESS				0x1080
+#define PM2R_MEM_CONFIG					0x10c0
+#define PM2R_BYPASS_WRITE_MASK				0x1100
+#define PM2R_FRAMEBUFFER_WRITE_MASK			0x1140
+
+#define PM2R_OUT_FIFO					0x2000
+
+#define PM2R_SCREEN_BASE				0x3000
+#define PM2R_SCREEN_STRIDE				0x3008
+#define PM2R_H_TOTAL					0x3010
+#define PM2R_HG_END					0x3018
+#define PM2R_HB_END					0x3020
+#define PM2R_HS_START					0x3028
+#define PM2R_HS_END					0x3030
+#define PM2R_V_TOTAL					0x3038
+#define PM2R_VB_END					0x3040
+#define PM2R_VS_START					0x3048
+#define PM2R_VS_END					0x3050
+#define PM2R_VIDEO_CONTROL				0x3058
+#define PM2R_LINE_COUNT					0x3070
+#define PM2R_FIFO_CONTROL				0x3078
+
+#define PM2R_RD_PALETTE_WRITE_ADDRESS			0x4000
+#define PM2R_RD_PALETTE_DATA				0x4008
+#define PM2R_RD_PIXEL_MASK				0x4010
+#define PM2R_RD_PALETTE_READ_ADDRESS			0x4018
+#define PM2R_RD_CURSOR_COLOR_ADDRESS		        0x4020
+#define PM2R_RD_CURSOR_COLOR_DATA		        0x4028
+#define PM2R_RD_INDEXED_DATA				0x4050
+#define PM2R_RD_CURSOR_DATA				0x4058
+#define PM2R_RD_CURSOR_X_LSB				0x4060
+#define PM2R_RD_CURSOR_X_MSB				0x4068
+#define PM2R_RD_CURSOR_Y_LSB				0x4070
+#define PM2R_RD_CURSOR_Y_MSB				0x4078
+
+#define PM2R_START_X_DOM				0x8000
+#define PM2R_D_X_DOM					0x8008
+#define PM2R_START_X_SUB				0x8010
+#define PM2R_D_X_SUB					0x8018
+#define PM2R_START_Y					0x8020
+#define PM2R_D_Y					0x8028
+#define PM2R_COUNT					0x8030
+#define PM2R_RENDER					0x8038
+#define PM2R_BIT_MASK_PATTERN				0x8068
+#define PM2R_RASTERIZER_MODE				0x80a0
+#define PM2R_RECTANGLE_ORIGIN				0x80d0
+#define PM2R_RECTANGLE_SIZE				0x80d8
+#define PM2R_PACKED_DATA_LIMITS				0x8150
+#define PM2R_SCISSOR_MODE				0x8180
+#define PM2R_SCISSOR_MIN_XY				0x8188
+#define PM2R_SCISSOR_MAX_XY				0x8190
+#define PM2R_SCREEN_SIZE				0x8198
+#define PM2R_AREA_STIPPLE_MODE				0x81a0
+#define PM2R_WINDOW_ORIGIN				0x81c8
+#define PM2R_TEXTURE_ADDRESS_MODE			0x8380
+#define PM2R_TEXTURE_MAP_FORMAT				0x8588
+#define PM2R_TEXTURE_DATA_FORMAT			0x8590
+#define PM2R_TEXTURE_READ_MODE				0x8670
+#define PM2R_TEXEL_LUT_MODE				0x8678
+#define PM2R_TEXTURE_COLOR_MODE				0x8680
+#define PM2R_FOG_MODE					0x8690
+#define PM2R_TEXEL0					0x8760
+#define PM2R_COLOR_DDA_MODE				0x87e0
+#define PM2R_CONSTANT_COLOR				0x87e8
+#define PM2R_ALPHA_BLEND_MODE				0x8810
+#define PM2R_DITHER_MODE				0x8818
+#define PM2R_FB_SOFT_WRITE_MASK				0x8820
+#define PM2R_LOGICAL_OP_MODE				0x8828
+#define PM2R_LB_READ_MODE				0x8880
+#define PM2R_LB_READ_FORMAT				0x8888
+#define PM2R_LB_SOURCE_OFFSET				0x8890
+#define PM2R_LB_WINDOW_BASE				0x88b8
+#define PM2R_LB_WRITE_FORMAT				0x88c8
+#define PM2R_STENCIL_MODE				0x8988
+#define PM2R_DEPTH_MODE					0x89a0
+#define PM2R_FB_READ_MODE				0x8a80
+#define PM2R_FB_SOURCE_OFFSET				0x8a88
+#define PM2R_FB_PIXEL_OFFSET				0x8a90
+#define PM2R_FB_WINDOW_BASE				0x8ab0
+#define PM2R_FB_WRITE_MODE				0x8ab8
+#define PM2R_FB_HARD_WRITE_MASK				0x8ac0
+#define PM2R_FB_BLOCK_COLOR				0x8ac8
+#define PM2R_FB_READ_PIXEL				0x8ad0
+#define PM2R_FILTER_MODE				0x8c00
+#define PM2R_SYNC					0x8c40
+#define PM2R_YUV_MODE					0x8f00
+#define PM2R_STATISTICS_MODE				0x8c08
+#define PM2R_FB_SOURCE_DELTA				0x8d88
+#define PM2R_CONFIG					0x8d90
+#define PM2R_DELTA_MODE					0x9300
+
+/* Permedia2v */
+#define PM2VR_RD_INDEX_LOW				0x4020
+#define PM2VR_RD_INDEX_HIGH				0x4028
+#define PM2VR_RD_INDEXED_DATA				0x4030
+
+/* Permedia2 RAMDAC indexed registers */
+#define PM2I_RD_CURSOR_CONTROL				0x06
+#define PM2I_RD_COLOR_MODE				0x18
+#define PM2I_RD_MODE_CONTROL				0x19
+#define PM2I_RD_MISC_CONTROL				0x1e
+#define PM2I_RD_PIXEL_CLOCK_A1				0x20
+#define PM2I_RD_PIXEL_CLOCK_A2				0x21
+#define PM2I_RD_PIXEL_CLOCK_A3				0x22
+#define PM2I_RD_PIXEL_CLOCK_STATUS			0x29
+#define PM2I_RD_MEMORY_CLOCK_1				0x30
+#define PM2I_RD_MEMORY_CLOCK_2				0x31
+#define PM2I_RD_MEMORY_CLOCK_3				0x32
+#define PM2I_RD_MEMORY_CLOCK_STATUS			0x33
+#define PM2I_RD_COLOR_KEY_CONTROL			0x40
+#define PM2I_RD_OVERLAY_KEY				0x41
+#define PM2I_RD_RED_KEY					0x42
+#define PM2I_RD_GREEN_KEY				0x43
+#define PM2I_RD_BLUE_KEY				0x44
+
+/* Permedia2v extensions */
+#define PM2VI_RD_MISC_CONTROL				0x000
+#define PM2VI_RD_SYNC_CONTROL				0x001
+#define PM2VI_RD_DAC_CONTROL				0x002
+#define PM2VI_RD_PIXEL_SIZE				0x003
+#define PM2VI_RD_COLOR_FORMAT				0x004
+#define PM2VI_RD_CURSOR_MODE				0x005
+#define PM2VI_RD_CURSOR_X_LOW				0x007
+#define PM2VI_RD_CURSOR_X_HIGH				0x008
+#define PM2VI_RD_CURSOR_Y_LOW				0x009
+#define PM2VI_RD_CURSOR_Y_HIGH				0x00A
+#define PM2VI_RD_CURSOR_X_HOT				0x00B
+#define PM2VI_RD_CURSOR_Y_HOT				0x00C
+#define PM2VI_RD_OVERLAY_KEY				0x00D
+#define PM2VI_RD_CLK0_PRESCALE				0x201
+#define PM2VI_RD_CLK0_FEEDBACK				0x202
+#define PM2VI_RD_CLK0_POSTSCALE				0x203
+#define PM2VI_RD_CLK1_PRESCALE				0x204
+#define PM2VI_RD_CLK1_FEEDBACK				0x205
+#define PM2VI_RD_CLK1_POSTSCALE				0x206
+#define PM2VI_RD_MCLK_CONTROL				0x20D
+#define PM2VI_RD_MCLK_PRESCALE				0x20E
+#define PM2VI_RD_MCLK_FEEDBACK				0x20F
+#define PM2VI_RD_MCLK_POSTSCALE				0x210
+#define PM2VI_RD_CURSOR_PALETTE				0x303
+#define PM2VI_RD_CURSOR_PATTERN				0x400
+
+/* Fields and flags */
+#define PM2F_RENDER_AREASTIPPLE				(1L<<0)
+#define PM2F_RENDER_FASTFILL				(1L<<3)
+#define PM2F_RENDER_PRIMITIVE_MASK			(3L<<6)
+#define PM2F_RENDER_LINE				0
+#define PM2F_RENDER_TRAPEZOID				(1L<<6)
+#define PM2F_RENDER_POINT				(2L<<6)
+#define PM2F_RENDER_RECTANGLE				(3L<<6)
+#define PM2F_RENDER_SYNC_ON_BIT_MASK			(1L<<11)
+#define PM2F_RENDER_TEXTURE_ENABLE			(1L<<13)
+#define PM2F_SYNCHRONIZATION				(1L<<10)
+#define PM2F_PLL_LOCKED					0x10
+#define PM2F_BEING_RESET				(1L<<31)
+#define PM2F_DATATYPE_COLOR				0x8000
+#define PM2F_VGA_ENABLE					0x02
+#define PM2F_VGA_FIXED					0x04
+#define PM2F_FB_WRITE_ENABLE				0x01
+#define PM2F_FB_READ_SOURCE_ENABLE			0x0200
+#define PM2F_RD_PALETTE_WIDTH_8				0x02
+#define PM2F_PART_PROD_MASK				0x01ff
+#define PM2F_SCREEN_SCISSOR_ENABLE			0x02
+#define PM2F_DATA_64_ENABLE				0x00010000
+#define PM2F_BLANK_LOW					0x02
+#define PM2F_HSYNC_MASK					0x18
+#define PM2F_VSYNC_MASK					0x60
+#define PM2F_HSYNC_ACT_HIGH				0x08
+#define PM2F_HSYNC_FORCED_LOW				0x10
+#define PM2F_HSYNC_ACT_LOW				0x18
+#define PM2F_VSYNC_ACT_HIGH				0x20
+#define PM2F_VSYNC_FORCED_LOW				0x40
+#define PM2F_VSYNC_ACT_LOW				0x60
+#define PM2F_LINE_DOUBLE				0x04
+#define PM2F_VIDEO_ENABLE				0x01
+#define PM2F_RD_PIXELFORMAT_SVGA			0x01
+#define PM2F_RD_PIXELFORMAT_RGB232OFFSET		0x02
+#define PM2F_RD_PIXELFORMAT_RGBA2321			0x03
+#define PM2F_RD_PIXELFORMAT_RGBA5551			0x04
+#define PM2F_RD_PIXELFORMAT_RGBA4444			0x05
+#define PM2F_RD_PIXELFORMAT_RGB565			0x06
+#define PM2F_RD_PIXELFORMAT_RGBA8888			0x08
+#define PM2F_RD_PIXELFORMAT_RGB888			0x09
+#define PM2F_RD_GUI_ACTIVE				0x10
+#define PM2F_RD_COLOR_MODE_RGB				0x20
+#define PM2F_DELTA_ORDER_RGB				(1L<<18)
+#define PM2F_RD_TRUECOLOR				0x80
+#define PM2F_NO_ALPHA_BUFFER				0x10
+#define PM2F_TEXTEL_SIZE_16				0x00080000
+#define PM2F_TEXTEL_SIZE_32				0x00100000
+#define PM2F_TEXTEL_SIZE_4				0x00180000
+#define PM2F_TEXTEL_SIZE_24				0x00200000
+#define PM2F_INCREASE_X					(1L<<21)
+#define PM2F_INCREASE_Y					(1L<<22)
+#define PM2F_CONFIG_FB_WRITE_ENABLE			(1L<<3)
+#define PM2F_CONFIG_FB_PACKED_DATA			(1L<<2)
+#define PM2F_CONFIG_FB_READ_DEST_ENABLE			(1L<<1)
+#define PM2F_CONFIG_FB_READ_SOURCE_ENABLE		(1L<<0)
+#define PM2F_COLOR_KEY_TEST_OFF				(1L<<4)
+#define PM2F_MEM_CONFIG_RAM_MASK			(3L<<29)
+#define PM2F_MEM_BANKS_1				0L
+#define PM2F_MEM_BANKS_2				(1L<<29)
+#define PM2F_MEM_BANKS_3				(2L<<29)
+#define PM2F_MEM_BANKS_4				(3L<<29)
+#define PM2F_APERTURE_STANDARD				0
+#define PM2F_APERTURE_BYTESWAP				1
+#define PM2F_APERTURE_HALFWORDSWAP			2
+#define PM2F_CURSORMODE_CURSOR_ENABLE			(1 << 0)
+#define PM2F_CURSORMODE_TYPE_X				(1 << 4)
+
+typedef enum {
+	PM2_TYPE_PERMEDIA2,
+	PM2_TYPE_PERMEDIA2V
+} pm2type_t;
+
+#endif /* PM2FB_H */
+
+/*****************************************************************************
+ * That's all folks!
+ *****************************************************************************/
diff --git a/include/video/platform_lcd.h b/include/video/platform_lcd.h
new file mode 100644
index 00000000..ad3bdfe7
--- /dev/null
+++ b/include/video/platform_lcd.h
@@ -0,0 +1,21 @@
+/* include/video/platform_lcd.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Generic platform-device LCD power control interface.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+struct plat_lcd_data;
+struct fb_info;
+
+struct plat_lcd_data {
+	void	(*set_power)(struct plat_lcd_data *, unsigned int power);
+	int	(*match_fb)(struct plat_lcd_data *, struct fb_info *);
+};
+
diff --git a/include/video/pm3fb.h b/include/video/pm3fb.h
new file mode 100644
index 00000000..2b85134f
--- /dev/null
+++ b/include/video/pm3fb.h
@@ -0,0 +1,1061 @@
+/*
+ *  linux/drivers/video/pm3fb.h -- 3DLabs Permedia3 frame buffer device
+ *
+ *  Copyright (C) 2001 Romain Dolbeau <dolbeau@irisa.fr>
+ *  Copyright (C) 2001 Sven Luther, <luther@dpt-info.u-strasbg.fr>
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+#ifndef PM3FB_H
+#define PM3FB_H
+
+/**********************************************
+*  GLINT Permedia3 Control Status registers   *
+***********************************************/
+/* Control Status Registers */
+#define PM3ResetStatus						0x0000
+#define PM3IntEnable						0x0008
+#define PM3IntFlags						0x0010
+#define PM3InFIFOSpace						0x0018
+#define PM3OutFIFOWords						0x0020
+#define PM3DMAAddress						0x0028
+#define PM3DMACount						0x0030
+#define PM3ErrorFlags						0x0038
+#define PM3VClkCtl						0x0040
+#define PM3TestRegister						0x0048
+#define PM3Aperture0						0x0050
+#define PM3Aperture1						0x0058
+#define PM3DMAControl						0x0060
+#define PM3FIFODis						0x0068
+#define PM3ChipConfig						0x0070
+#define PM3AGPControl						0x0078
+
+#define PM3GPOutDMAAddress					0x0080
+#define PM3PCIFeedbackCount					0x0088
+#define PM3PCIAbortStatus					0x0090
+#define PM3PCIAbortAddress					0x0098
+
+#define PM3PCIPLLStatus						0x00f0
+
+#define PM3HostTextureAddress					0x0100
+#define PM3TextureDownloadControl				0x0108
+#define PM3TextureOperation					0x0110
+#define PM3LogicalTexturePage					0x0118
+#define PM3TexDMAAddress					0x0120
+#define PM3TexFIFOSpace						0x0128
+
+/**********************************************
+*  GLINT Permedia3 Region 0 Bypass Controls   *
+***********************************************/
+#define PM3ByAperture1Mode					0x0300
+	#define PM3ByApertureMode_BYTESWAP_ABCD			(0 << 0)
+	#define PM3ByApertureMode_BYTESWAP_BADC			(1 << 0)
+	#define PM3ByApertureMode_BYTESWAP_CDAB			(2 << 0)
+	#define PM3ByApertureMode_BYTESWAP_DCBA			(3 << 0)
+	#define PM3ByApertureMode_PATCH_ENABLE			(1 << 2)
+	#define PM3ByApertureMode_FORMAT_RAW			(0 << 3)
+	#define PM3ByApertureMode_FORMAT_YUYV			(1 << 3)
+	#define PM3ByApertureMode_FORMAT_UYVY			(2 << 3)
+	#define PM3ByApertureMode_PIXELSIZE_8BIT		(0 << 5)
+	#define PM3ByApertureMode_PIXELSIZE_16BIT		(1 << 5)
+	#define PM3ByApertureMode_PIXELSIZE_32BIT		(2 << 5)
+		#define PM3ByApertureMode_PIXELSIZE_MASK	(3 << 5)
+	#define PM3ByApertureMode_EFFECTIVE_STRIDE_1024		(0 << 7)
+	#define PM3ByApertureMode_EFFECTIVE_STRIDE_2048		(1 << 7)
+	#define PM3ByApertureMode_EFFECTIVE_STRIDE_4096		(2 << 7)
+	#define PM3ByApertureMode_EFFECTIVE_STRIDE_8192		(3 << 7)
+	#define PM3ByApertureMode_PATCH_OFFSET_X(off)	(((off) & 0x7f) << 9)
+	#define PM3ByApertureMode_PATCH_OFFSET_Y(off)	(((off) & 0x7f) << 16)
+	#define PM3ByApertureMode_FRAMEBUFFER			(0 << 21)
+	#define PM3ByApertureMode_LOCALBUFFER			(1 << 21)
+	#define PM3ByApertureMode_DOUBLE_WRITE_OFF		(0 << 22)
+	#define PM3ByApertureMode_DOUBLE_WRITE_1MB		(1 << 22)
+	#define PM3ByApertureMode_DOUBLE_WRITE_2MB		(2 << 22)
+	#define PM3ByApertureMode_DOUBLE_WRITE_4MB		(3 << 22)
+	#define PM3ByApertureMode_DOUBLE_WRITE_8MB		(4 << 22)
+	#define PM3ByApertureMode_DOUBLE_WRITE_16MB		(5 << 22)
+	#define PM3ByApertureMode_DOUBLE_WRITE_32MB		(6 << 22)
+
+#define PM3ByAperture2Mode					0x0328
+
+/**********************************************
+*  GLINT Permedia3 Memory Control (0x1000)    *
+***********************************************/
+#define PM3MemCounter						0x1000
+#define PM3MemBypassWriteMask					0x1008
+#define PM3MemScratch						0x1010
+#define PM3LocalMemCaps						0x1018
+	#define PM3LocalMemCaps_NoWriteMask			(1 << 28)
+#define PM3LocalMemTimings					0x1020
+#define PM3LocalMemControl					0x1028
+#define PM3LocalMemRefresh					0x1030
+#define PM3LocalMemPowerDown					0x1038
+#define PM3RemoteMemControl					0x1100
+
+/**********************************************
+*  GLINT Permedia3 Video Control (0x3000)     *
+***********************************************/
+
+#define PM3ScreenBase						0x3000
+#define PM3ScreenStride						0x3008
+#define PM3HTotal						0x3010
+#define PM3HgEnd						0x3018
+#define PM3HbEnd						0x3020
+#define PM3HsStart						0x3028
+#define PM3HsEnd						0x3030
+#define PM3VTotal						0x3038
+#define PM3VbEnd						0x3040
+#define PM3VsStart						0x3048
+#define PM3VsEnd						0x3050
+#define PM3VideoControl						0x3058
+	#define PM3VideoControl_ENABLE				(1 << 0)
+	#define PM3VideoControl_BLANK_ACTIVE_HIGH		(0 << 1)
+	#define PM3VideoControl_BLANK_ACTIVE_LOW		(1 << 1)
+	#define PM3VideoControl_LINE_DOUBLE_OFF			(0 << 2)
+	#define PM3VideoControl_LINE_DOUBLE_ON			(1 << 2)
+	#define PM3VideoControl_HSYNC_FORCE_HIGH		(0 << 3)
+	#define PM3VideoControl_HSYNC_ACTIVE_HIGH		(1 << 3)
+	#define PM3VideoControl_HSYNC_FORCE_LOW			(2 << 3)
+	#define PM3VideoControl_HSYNC_ACTIVE_LOW		(3 << 3)
+	#define PM3VideoControl_HSYNC_MASK			(3 << 3)
+	#define PM3VideoControl_VSYNC_FORCE_HIGH		(0 << 5)
+	#define PM3VideoControl_VSYNC_ACTIVE_HIGH		(1 << 5)
+	#define PM3VideoControl_VSYNC_FORCE_LOW			(2 << 5)
+	#define PM3VideoControl_VSYNC_ACTIVE_LOW		(3 << 5)
+	#define PM3VideoControl_VSYNC_MASK			(3 << 5)
+	#define PM3VideoControl_BYTE_DOUBLE_OFF			(0 << 7)
+	#define PM3VideoControl_BYTE_DOUBLE_ON			(1 << 7)
+	#define PM3VideoControl_BUFFER_SWAP_SYNCON_FRAMEBLANK	(0 << 9)
+	#define PM3VideoControl_BUFFER_SWAP_FREE_RUNNING	(1 << 9)
+	#define PM3VideoControl_BUFFER_SWAP_LIMITETO_FRAMERATE	(2 << 9)
+	#define PM3VideoControl_STEREO_ENABLE			(1 << 11)
+	#define PM3VideoControl_RIGHT_EYE_ACTIVE_HIGH		(0 << 12)
+	#define PM3VideoControl_RIGHT_EYE_ACTIVE_LOW		(1 << 12)
+	#define PM3VideoControl_VIDEO_EXT_LOW			(0 << 14)
+	#define PM3VideoControl_VIDEO_EXT_HIGH			(1 << 14)
+	#define PM3VideoControl_SYNC_MODE_INDEPENDENT		(0 << 16)
+	#define PM3VideoControl_SYNC_MODE_SYNCTO_VSA		(1 << 16)
+	#define PM3VideoControl_SYNC_MODE_SYNCTO_VSB		(2 << 16)
+	#define PM3VideoControl_PATCH_ENABLE			(1 << 18)
+	#define PM3VideoControl_PIXELSIZE_8BIT			(0 << 19)
+	#define PM3VideoControl_PIXELSIZE_16BIT			(1 << 19)
+	#define PM3VideoControl_PIXELSIZE_32BIT			(2 << 19)
+	#define PM3VideoControl_DISPLAY_ENABLE			(1 << 21)
+	#define PM3VideoControl_PATCH_OFFSET_X(off)	(((off) & 0x3f) << 22)
+	#define PM3VideoControl_PATCH_OFFSET_Y(off)	(((off) & 0x3f) << 28)
+#define PM3InterruptLine					0x3060
+#define PM3DisplayData						0x3068
+#define PM3VerticalLineCount					0x3070
+#define PM3FifoControl						0x3078
+#define PM3ScreenBaseRight					0x3080
+#define PM3MiscControl						0x3088
+
+#define PM3VideoOverlayUpdate					0x3100
+	#define PM3VideoOverlayUpdate_ENABLE			(1 << 0)
+#define PM3VideoOverlayMode					0x3108
+	#define PM3VideoOverlayMode_ENABLE			(1 << 0)
+	#define PM3VideoOverlayMode_BUFFERSYNC_MANUAL		(0 << 1)
+	#define PM3VideoOverlayMode_BUFFERSYNC_VIDEOSTREAMA	(1 << 1)
+	#define PM3VideoOverlayMode_BUFFERSYNC_VIDEOSTREAMB	(2 << 1)
+	#define PM3VideoOverlayMode_FIELDPOLARITY_NORMAL	(0 << 4)
+	#define PM3VideoOverlayMode_FIELDPOLARITY_INVERT	(1 << 4)
+	#define PM3VideoOverlayMode_PIXELSIZE_8BIT		(0 << 5)
+	#define PM3VideoOverlayMode_PIXELSIZE_16BIT		(1 << 5)
+	#define PM3VideoOverlayMode_PIXELSIZE_32BIT		(2 << 5)
+	#define PM3VideoOverlayMode_COLORFORMAT_RGB8888		\
+					((0 << 7)|(1 << 12)|(2 << 5))
+	#define PM3VideoOverlayMode_COLORFORMAT_RGB4444		\
+					((1 << 7)|(1 << 12)|(1 << 5))
+	#define PM3VideoOverlayMode_COLORFORMAT_RGB5551		\
+					((2 << 7)|(1 << 12)|(1 << 5))
+	#define PM3VideoOverlayMode_COLORFORMAT_RGB565		\
+					((3 << 7)|(1 << 12)|(1 << 5))
+	#define PM3VideoOverlayMode_COLORFORMAT_RGB332		\
+					((4 << 7)|(1 << 12)|(0 << 5))
+	#define PM3VideoOverlayMode_COLORFORMAT_BGR8888		\
+					((0 << 7)|(2 << 5))
+	#define PM3VideoOverlayMode_COLORFORMAT_BGR4444		\
+					((1 << 7)|(1 << 5))
+	#define PM3VideoOverlayMode_COLORFORMAT_BGR5551		\
+					((2 << 7)|(1 << 5))
+	#define PM3VideoOverlayMode_COLORFORMAT_BGR565		\
+					((3 << 7)|(1 << 5))
+	#define PM3VideoOverlayMode_COLORFORMAT_BGR332		\
+					((4 << 7)|(0 << 5))
+	#define PM3VideoOverlayMode_COLORFORMAT_CI8		\
+					((5 << 7)|(1 << 12)|(0 << 5))
+	#define PM3VideoOverlayMode_COLORFORMAT_VUY444		\
+					((2 << 10)|(1 << 12)|(2 << 5))
+	#define PM3VideoOverlayMode_COLORFORMAT_YUV444		\
+					((2 << 10)|(2 << 5))
+	#define PM3VideoOverlayMode_COLORFORMAT_VUY422		\
+					((1 << 10)|(1 << 12)|(1 << 5))
+	#define PM3VideoOverlayMode_COLORFORMAT_YUV422		\
+					((1 << 10)|(1 << 5))
+	#define PM3VideoOverlayMode_COLORORDER_BGR		(0 << 12)
+	#define PM3VideoOverlayMode_COLORORDER_RGB		(1 << 12)
+	#define PM3VideoOverlayMode_LINEARCOLOREXT_OFF		(0 << 13)
+	#define PM3VideoOverlayMode_LINEARCOLOREXT_ON		(1 << 13)
+	#define PM3VideoOverlayMode_FILTER_MASK			(3 << 14)
+	#define PM3VideoOverlayMode_FILTER_OFF			(0 << 14)
+	#define PM3VideoOverlayMode_FILTER_FULL			(1 << 14)
+	#define PM3VideoOverlayMode_FILTER_PARTIAL		(2 << 14)
+	#define PM3VideoOverlayMode_DEINTERLACE_OFF		(0 << 16)
+	#define PM3VideoOverlayMode_DEINTERLACE_BOB		(1 << 16)
+	#define PM3VideoOverlayMode_PATCHMODE_OFF		(0 << 18)
+	#define PM3VideoOverlayMode_PATCHMODE_ON		(1 << 18)
+	#define PM3VideoOverlayMode_FLIP_VIDEO			(0 << 20)
+	#define PM3VideoOverlayMode_FLIP_VIDEOSTREAMA		(1 << 20)
+	#define PM3VideoOverlayMode_FLIP_VIDEOSTREAMB		(2 << 20)
+	#define PM3VideoOverlayMode_MIRROR_MASK			(3 << 23)
+	#define PM3VideoOverlayMode_MIRRORX_OFF			(0 << 23)
+	#define PM3VideoOverlayMode_MIRRORX_ON			(1 << 23)
+	#define PM3VideoOverlayMode_MIRRORY_OFF			(0 << 24)
+	#define PM3VideoOverlayMode_MIRRORY_ON			(1 << 24)
+#define PM3VideoOverlayFifoControl				0x3110
+#define PM3VideoOverlayIndex					0x3118
+#define PM3VideoOverlayBase0					0x3120
+#define PM3VideoOverlayBase1					0x3128
+#define PM3VideoOverlayBase2					0x3130
+#define PM3VideoOverlayStride					0x3138
+	#define PM3VideoOverlayStride_STRIDE(s)		(((s) & 0xfff) << 0)
+#define PM3VideoOverlayWidth					0x3140
+	#define PM3VideoOverlayWidth_WIDTH(w)		(((w) & 0xfff) << 0)
+#define PM3VideoOverlayHeight					0x3148
+	#define PM3VideoOverlayHeight_HEIGHT(h)		(((h) & 0xfff) << 0)
+#define PM3VideoOverlayOrigin					0x3150
+	#define PM3VideoOverlayOrigin_XORIGIN(x)	(((x) & 0xfff) << 0)
+	#define PM3VideoOverlayOrigin_YORIGIN(y)	(((y) & 0xfff) << 16)
+#define PM3VideoOverlayShrinkXDelta				0x3158
+	#define PM3VideoOverlayShrinkXDelta_NONE		(1 << 16)
+	#define PM3VideoOverlayShrinkXDelta_DELTA(s,d)	\
+		((((s) << 16)/(d)) & 0x0ffffff0)
+#define PM3VideoOverlayZoomXDelta				0x3160
+	#define PM3VideoOverlayZoomXDelta_NONE			(1 << 16)
+	#define PM3VideoOverlayZoomXDelta_DELTA(s,d)	\
+		((((s) << 16)/(d)) & 0x0001fff0)
+#define PM3VideoOverlayYDelta					0x3168
+	#define PM3VideoOverlayYDelta_NONE			(1 << 16)
+	#define PM3VideoOverlayYDelta_DELTA(s,d)	\
+		((((s) << 16)/(d)) & 0x0ffffff0)
+#define PM3VideoOverlayFieldOffset				0x3170
+#define PM3VideoOverlayStatus					0x3178
+
+/**********************************************
+*  GLINT Permedia3 RAMDAC Registers (0x4000)  *
+***********************************************/
+/* Direct Registers */
+#define PM3RD_PaletteWriteAddress				0x4000
+#define PM3RD_PaletteData					0x4008
+#define PM3RD_PixelMask						0x4010
+#define PM3RD_PaletteReadAddress				0x4018
+
+#define PM3RD_IndexLow						0x4020
+#define PM3RD_IndexHigh						0x4028
+#define PM3RD_IndexedData					0x4030
+#define PM3RD_IndexControl					0x4038
+	#define PM3RD_IndexControl_AUTOINCREMENT_ENABLE		(1 << 0)
+
+/* Indirect Registers */
+#define PM3RD_MiscControl					0x000
+	#define PM3RD_MiscControl_HIGHCOLOR_RES_ENABLE		(1 << 0)
+	#define PM3RD_MiscControl_PIXELDOUBLE_ENABLE		(1 << 1)
+	#define PM3RD_MiscControl_LASTREAD_ADDR_ENABLE		(1 << 2)
+	#define PM3RD_MiscControl_DIRECTCOLOR_ENABLE		(1 << 3)
+	#define PM3RD_MiscControl_OVERLAY_ENABLE		(1 << 4)
+	#define PM3RD_MiscControl_PIXELDOUBLE_BUFFER_ENABLE	(1 << 5)
+	#define PM3RD_MiscControl_VSB_OUTPUT_ENABLE		(1 << 6)
+	#define PM3RD_MiscControl_STEREODOUBLE_BUFFER_ENABLE	(1 << 7)
+#define PM3RD_SyncControl					0x001
+	#define PM3RD_SyncControl_HSYNC_ACTIVE_LOW		(0 << 0)
+	#define PM3RD_SyncControl_HSYNC_ACTIVE_HIGH		(1 << 0)
+	#define PM3RD_SyncControl_HSYNC_FORCE_ACTIVE		(3 << 0)
+	#define PM3RD_SyncControl_HSYNC_FORCE_INACTIVE		(4 << 0)
+	#define PM3RD_SyncControl_HSYNC_TRI_STATE		(2 << 0)
+	#define PM3RD_SyncControl_VSYNC_ACTIVE_LOW		(0 << 3)
+	#define PM3RD_SyncControl_VSYNC_ACTIVE_HIGH		(1 << 3)
+	#define PM3RD_SyncControl_VSYNC_TRI_STATE		(2 << 3)
+	#define PM3RD_SyncControl_VSYNC_FORCE_ACTIVE		(3 << 3)
+	#define PM3RD_SyncControl_VSYNC_FORCE_INACTIVE		(4 << 3)
+	#define PM3RD_SyncControl_HSYNC_OVERRIDE_SETBY_HSYNC	(0 << 6)
+	#define PM3RD_SyncControl_HSYNC_OVERRIDE_FORCE_HIGH	(1 << 6)
+	#define PM3RD_SyncControl_VSYNC_OVERRIDE_SETBY_VSYNC	(0 << 7)
+	#define PM3RD_SyncControl_VSYNC_OVERRIDE_FORCE_HIGH	(1 << 7)
+#define PM3RD_DACControl					0x002
+	#define PM3RD_DACControl_DAC_POWER_ON			(0 << 0)
+	#define PM3RD_DACControl_DAC_POWER_OFF			(1 << 0)
+	#define PM3RD_DACControl_SYNC_ON_GREEN_ENABLE		(1 << 3)
+	#define PM3RD_DACControl_BLANK_RED_DAC_ENABLE		(1 << 4)
+	#define PM3RD_DACControl_BLANK_GREEN_DAC_ENABLE		(1 << 5)
+	#define PM3RD_DACControl_BLANK_BLUE_DAC_ENABLE		(1 << 6)
+	#define PM3RD_DACControl_BLANK_PEDESTAL_ENABLE		(1 << 7)
+#define PM3RD_PixelSize						0x003
+	#define PM3RD_PixelSize_24_BIT_PIXELS			(4 << 0)
+	#define PM3RD_PixelSize_32_BIT_PIXELS			(2 << 0)
+	#define PM3RD_PixelSize_16_BIT_PIXELS			(1 << 0)
+	#define PM3RD_PixelSize_8_BIT_PIXELS			(0 << 0)
+#define PM3RD_ColorFormat					0x004
+	#define PM3RD_ColorFormat_LINEAR_COLOR_EXT_ENABLE	(1 << 6)
+	#define PM3RD_ColorFormat_COLOR_ORDER_BLUE_LOW		(1 << 5)
+	#define PM3RD_ColorFormat_COLOR_ORDER_RED_LOW		(0 << 5)
+	#define PM3RD_ColorFormat_COLOR_FORMAT_MASK		(0x1f << 0)
+	#define PM3RD_ColorFormat_8888_COLOR			(0 << 0)
+	#define PM3RD_ColorFormat_5551_FRONT_COLOR		(1 << 0)
+	#define PM3RD_ColorFormat_4444_COLOR			(2 << 0)
+	#define PM3RD_ColorFormat_332_FRONT_COLOR		(5 << 0)
+	#define PM3RD_ColorFormat_332_BACK_COLOR		(6 << 0)
+	#define PM3RD_ColorFormat_2321_FRONT_COLOR		(9 << 0)
+	#define PM3RD_ColorFormat_2321_BACK_COLOR		(10 << 0)
+	#define PM3RD_ColorFormat_232_FRONTOFF_COLOR		(11 << 0)
+	#define PM3RD_ColorFormat_232_BACKOFF_COLOR		(12 << 0)
+	#define PM3RD_ColorFormat_5551_BACK_COLOR		(13 << 0)
+	#define PM3RD_ColorFormat_CI8_COLOR			(14 << 0)
+	#define PM3RD_ColorFormat_565_FRONT_COLOR		(16 << 0)
+	#define PM3RD_ColorFormat_565_BACK_COLOR		(17 << 0)
+#define PM3RD_CursorMode					0x005
+	#define PM3RD_CursorMode_CURSOR_ENABLE			(1 << 0)
+	#define PM3RD_CursorMode_FORMAT_64x64_2BPE_P0123	(0 << 2)
+	#define PM3RD_CursorMode_FORMAT_32x32_2BPE_P0		(1 << 2)
+	#define PM3RD_CursorMode_FORMAT_32x32_2BPE_P1		(2 << 2)
+	#define PM3RD_CursorMode_FORMAT_32x32_2BPE_P2		(3 << 2)
+	#define PM3RD_CursorMode_FORMAT_32x32_2BPE_P3		(4 << 2)
+	#define PM3RD_CursorMode_FORMAT_32x32_4BPE_P01		(5 << 2)
+	#define PM3RD_CursorMode_FORMAT_32x32_4BPE_P23		(6 << 2)
+	#define PM3RD_CursorMode_TYPE_MS			(0 << 4)
+	#define PM3RD_CursorMode_TYPE_X				(1 << 4)
+	#define PM3RD_CursorMode_REVERSE_PIXEL_ORDER_ENABLE	(1 << 6)
+	#define PM3RD_CursorMode_REVERSE_PIXEL_ORDER_3_COLOR	(2 << 6)
+	#define PM3RD_CursorMode_REVERSE_PIXEL_ORDER_15_COLOR	(3 << 6)
+#define PM3RD_CursorControl					0x006
+	#define PM3RD_CursorControl_DOUBLE_X_ENABLED		(1 << 0)
+	#define PM3RD_CursorControl_DOUBLE_Y_ENABLED		(1 << 1)
+	#define PM3RD_CursorControl_READBACK_POS_ENABLED	(1 << 2)
+
+#define PM3RD_CursorXLow					0x007
+#define PM3RD_CursorXHigh					0x008
+#define PM3RD_CursorYLow					0x009
+#define PM3RD_CursorYHigh					0x00a
+#define PM3RD_CursorHotSpotX					0x00b
+#define PM3RD_CursorHotSpotY					0x00c
+#define PM3RD_OverlayKey					0x00d
+#define PM3RD_Pan						0x00e
+	#define PM3RD_Pan_ENABLE				(1 << 0)
+	#define PM3RD_Pan_GATE_ENABLE				(1 << 1)
+#define PM3RD_Sense						0x00f
+
+#define PM3RD_CheckControl					0x018
+	#define PM3RD_CheckControl_PIXEL_ENABLED		(1 << 0)
+	#define PM3RD_CheckControl_LUT_ENABLED			(1 << 1)
+#define PM3RD_CheckPixelRed					0x019
+#define PM3RD_CheckPixelGreen					0x01a
+#define PM3RD_CheckPixelBlue					0x01b
+#define PM3RD_CheckLUTRed					0x01c
+#define PM3RD_CheckLUTGreen					0x01d
+#define PM3RD_CheckLUTBlue					0x01e
+#define PM3RD_Scratch						0x01f
+
+#define PM3RD_VideoOverlayControl				0x020
+	#define PM3RD_VideoOverlayControl_ENABLE		(1 << 0)
+	#define PM3RD_VideoOverlayControl_MODE_MASK		(3 << 1)
+	#define PM3RD_VideoOverlayControl_MODE_MAINKEY		(0 << 1)
+	#define PM3RD_VideoOverlayControl_MODE_OVERLAYKEY	(1 << 1)
+	#define PM3RD_VideoOverlayControl_MODE_ALWAYS		(2 << 1)
+	#define PM3RD_VideoOverlayControl_MODE_BLEND		(3 << 1)
+	#define PM3RD_VideoOverlayControl_DIRECTCOLOR_ENABLED	(1 << 3)
+	#define PM3RD_VideoOverlayControl_BLENDSRC_MAIN		(0 << 4)
+	#define PM3RD_VideoOverlayControl_BLENDSRC_REGISTER	(1 << 4)
+	#define PM3RD_VideoOverlayControl_KEY_COLOR		(0 << 5)
+	#define PM3RD_VideoOverlayControl_KEY_ALPHA		(1 << 5)
+#define PM3RD_VideoOverlayXStartLow				0x021
+#define PM3RD_VideoOverlayXStartHigh				0x022
+#define PM3RD_VideoOverlayYStartLow				0x023
+#define PM3RD_VideoOverlayYStartHigh				0x024
+#define PM3RD_VideoOverlayXEndLow				0x025
+#define PM3RD_VideoOverlayXEndHigh				0x026
+#define PM3RD_VideoOverlayYEndLow				0x027
+#define PM3RD_VideoOverlayYEndHigh				0x028
+#define PM3RD_VideoOverlayKeyR					0x029
+#define PM3RD_VideoOverlayKeyG					0x02a
+#define PM3RD_VideoOverlayKeyB					0x02b
+#define PM3RD_VideoOverlayBlend					0x02c
+	#define PM3RD_VideoOverlayBlend_FACTOR_0_PERCENT	(0 << 6)
+	#define PM3RD_VideoOverlayBlend_FACTOR_25_PERCENT	(1 << 6)
+	#define PM3RD_VideoOverlayBlend_FACTOR_75_PERCENT	(2 << 6)
+	#define PM3RD_VideoOverlayBlend_FACTOR_100_PERCENT	(3 << 6)
+
+#define PM3RD_DClkSetup1					0x1f0
+#define PM3RD_DClkSetup2					0x1f1
+#define PM3RD_KClkSetup1					0x1f2
+#define PM3RD_KClkSetup2					0x1f3
+
+#define PM3RD_DClkControl					0x200
+	#define PM3RD_DClkControl_SOURCE_PLL			(0 << 4)
+	#define PM3RD_DClkControl_SOURCE_VSA			(1 << 4)
+	#define PM3RD_DClkControl_SOURCE_VSB			(2 << 4)
+	#define PM3RD_DClkControl_SOURCE_EXT			(3 << 4)
+	#define PM3RD_DClkControl_STATE_RUN			(2 << 2)
+	#define PM3RD_DClkControl_STATE_HIGH			(1 << 2)
+	#define PM3RD_DClkControl_STATE_LOW			(0 << 2)
+	#define PM3RD_DClkControl_LOCKED			(1 << 1)
+	#define PM3RD_DClkControl_NOT_LOCKED			(0 << 1)
+	#define PM3RD_DClkControl_ENABLE			(1 << 0)
+#define PM3RD_DClk0PreScale					0x201
+#define PM3RD_DClk0FeedbackScale				0x202
+#define PM3RD_DClk0PostScale					0x203
+	#define PM3_REF_CLOCK					14318
+#define PM3RD_DClk1PreScale					0x204
+#define PM3RD_DClk1FeedbackScale				0x205
+#define PM3RD_DClk1PostScale					0x206
+#define PM3RD_DClk2PreScale					0x207
+#define PM3RD_DClk2FeedbackScale				0x208
+#define PM3RD_DClk2PostScale					0x209
+#define PM3RD_DClk3PreScale					0x20a
+#define PM3RD_DClk3FeedbackScale				0x20b
+#define PM3RD_DClk3PostScale					0x20c
+#define PM3RD_KClkControl					0x20d
+	#define PM3RD_KClkControl_ENABLE			(1 << 0)
+	#define PM3RD_KClkControl_NOT_LOCKED			(0 << 1)
+	#define PM3RD_KClkControl_LOCKED			(1 << 1)
+	#define PM3RD_KClkControl_STATE_LOW			(0 << 2)
+	#define PM3RD_KClkControl_STATE_HIGH			(1 << 2)
+	#define PM3RD_KClkControl_STATE_RUN			(2 << 2)
+	#define PM3RD_KClkControl_STATE_LOW_POWER		(3 << 2)
+	#define PM3RD_KClkControl_SOURCE_PCLK			(0 << 4)
+	#define PM3RD_KClkControl_SOURCE_HALF_PCLK		(1 << 4)
+	#define PM3RD_KClkControl_SOURCE_PLL			(2 << 4)
+#define PM3RD_KClkPreScale					0x20e
+#define PM3RD_KClkFeedbackScale					0x20f
+#define PM3RD_KClkPostScale					0x210
+#define PM3RD_MClkControl					0x211
+	#define PM3RD_MClkControl_ENABLE			(1 << 0)
+	#define PM3RD_MClkControl_NOT_LOCKED			(0 << 1)
+	#define PM3RD_MClkControl_LOCKED			(1 << 1)
+	#define PM3RD_MClkControl_STATE_LOW			(0 << 2)
+	#define PM3RD_MClkControl_STATE_HIGH			(1 << 2)
+	#define PM3RD_MClkControl_STATE_RUN			(2 << 2)
+	#define PM3RD_MClkControl_STATE_LOW_POWER		(3 << 2)
+	#define PM3RD_MClkControl_SOURCE_PCLK			(0 << 4)
+	#define PM3RD_MClkControl_SOURCE_HALF_PCLK		(1 << 4)
+	#define PM3RD_MClkControl_SOURCE_HALF_EXT		(3 << 4)
+	#define PM3RD_MClkControl_SOURCE_EXT			(4 << 4)
+	#define PM3RD_MClkControl_SOURCE_HALF_KCLK		(5 << 4)
+	#define PM3RD_MClkControl_SOURCE_KCLK			(6 << 4)
+#define PM3RD_MClkPreScale					0x212
+#define PM3RD_MClkFeedbackScale					0x213
+#define PM3RD_MClkPostScale					0x214
+#define PM3RD_SClkControl					0x215
+	#define PM3RD_SClkControl_ENABLE			(1 << 0)
+	#define PM3RD_SClkControl_NOT_LOCKED			(0 << 1)
+	#define PM3RD_SClkControl_LOCKED			(1 << 1)
+	#define PM3RD_SClkControl_STATE_LOW			(0 << 2)
+	#define PM3RD_SClkControl_STATE_HIGH			(1 << 2)
+	#define PM3RD_SClkControl_STATE_RUN			(2 << 2)
+	#define PM3RD_SClkControl_STATE_LOW_POWER		(3 << 2)
+	#define PM3RD_SClkControl_SOURCE_PCLK			(0 << 4)
+	#define PM3RD_SClkControl_SOURCE_HALF_PCLK		(1 << 4)
+	#define PM3RD_SClkControl_SOURCE_HALF_EXT		(3 << 4)
+	#define PM3RD_SClkControl_SOURCE_EXT			(4 << 4)
+	#define PM3RD_SClkControl_SOURCE_HALF_KCLK		(5 << 4)
+	#define PM3RD_SClkControl_SOURCE_KCLK			(6 << 4)
+#define PM3RD_SClkPreScale					0x216
+#define PM3RD_SClkFeedbackScale					0x217
+#define PM3RD_SClkPostScale					0x218
+
+#define PM3RD_CursorPalette(p)				(0x303 + (p))
+#define PM3RD_CursorPattern(p)				(0x400 + (p))
+/******************************************************
+*  GLINT Permedia3 Video Streaming Registers (0x5000) *
+*******************************************************/
+
+#define PM3VSConfiguration					0x5800
+
+/**********************************************
+*  GLINT Permedia3 Core Registers (0x8000+)   *
+***********************************************/
+#define PM3AALineWidth						0x94c0
+#define PM3AAPointsize						0x94a0
+#define PM3AlphaBlendAlphaMode					0xafa8
+#define PM3AlphaBlendAlphaModeAnd				0xad30
+#define PM3AlphaBlendAlphaModeOr				0xad38
+#define PM3AlphaBlendColorMode					0xafa0
+#define PM3AlphaBlendColorModeAnd				0xacb0
+#define PM3AlphaBlendColorModeOr				0xacb8
+#define PM3AlphaDestColor					0xaf88
+#define PM3AlphaSourceColor					0xaf80
+#define PM3AlphaTestMode					0x8800
+#define PM3AlphaTestModeAnd					0xabf0
+#define PM3AlphaTestModeOr					0xabf8
+#define PM3AntialiasMode					0x8808
+#define PM3AntialiasModeAnd					0xac00
+#define PM3AntialiasModeOr					0xac08
+/* ... */
+#define PM3BackgroundColor					0xb0c8
+/* ... */
+#define PM3ColorDDAMode						0x87e0
+#define PM3ColorDDAModeAnd					0xabe0
+#define PM3ColorDDAModeOr					0xabe8
+#define PM3CommandInterrupt					0xa990
+#define PM3ConstantColorDDA					0xafb0
+	#define PM3ConstantColorDDA_R(r)		((r) & 0xff)
+	#define PM3ConstantColorDDA_G(g)		(((g) & 0xff) << 8)
+	#define PM3ConstantColorDDA_B(b)		(((b) & 0xff) << 16)
+	#define PM3ConstantColorDDA_A(a)		(((a) & 0xff) << 24)
+#define PM3ContextData						0x8dd0
+#define PM3ContextDump						0x8dc0
+#define PM3ContextRestore					0x8dc8
+#define PM3Continue						0x8058
+#define PM3ContinueNewDom					0x8048
+#define PM3ContinueNewLine					0x8040
+#define PM3ContinueNewSub					0x8050
+#define PM3Count						0x8030
+/* ... */
+#define PM3DeltaControl						0x9350
+#define PM3DeltaControlAnd					0xab20
+#define PM3DeltaControlOr					0xab28
+#define PM3DeltaMode						0x9300
+#define PM3DeltaModeAnd						0xaad0
+#define PM3DeltaModeOr						0xaad8
+/* ... */
+#define PM3DitherMode						0x8818
+#define PM3DitherModeAnd					0xacd0
+#define PM3DitherModeOr						0xacd8
+/* ... */
+#define PM3dXDom						0x8008
+#define PM3dXSub						0x8018
+#define PM3dY							0x8028
+/* ... */
+#define PM3FBBlockColor						0x8ac8
+#define PM3FBBlockColor0					0xb060
+#define PM3FBBlockColor1					0xb068
+#define PM3FBBlockColor2					0xb070
+#define PM3FBBlockColor3					0xb078
+#define PM3FBBlockColorBack					0xb0a0
+#define PM3FBBlockColorBack0					0xb080
+#define PM3FBBlockColorBack1					0xb088
+#define PM3FBBlockColorBack2					0xb090
+#define PM3FBBlockColorBack3					0xb098
+#define PM3FBColor						0x8a98
+#define PM3FBDestReadBufferAddr0				0xae80
+#define PM3FBDestReadBufferAddr1				0xae88
+#define PM3FBDestReadBufferAddr2				0xae90
+#define PM3FBDestReadBufferAddr3				0xae98
+#define PM3FBDestReadBufferOffset0				0xaea0
+#define PM3FBDestReadBufferOffset1				0xaea8
+#define PM3FBDestReadBufferOffset2				0xaeb0
+#define PM3FBDestReadBufferOffset3				0xaeb8
+	#define PM3FBDestReadBufferOffset_XOffset(x)	((x) & 0xffff)
+	#define PM3FBDestReadBufferOffset_YOffset(y)	(((y) & 0xffff) << 16)
+#define PM3FBDestReadBufferWidth0				0xaec0
+#define PM3FBDestReadBufferWidth1				0xaec8
+#define PM3FBDestReadBufferWidth2				0xaed0
+#define PM3FBDestReadBufferWidth3				0xaed8
+	#define PM3FBDestReadBufferWidth_Width(w)	((w) & 0x0fff)
+
+#define PM3FBDestReadEnables					0xaee8
+#define PM3FBDestReadEnablesAnd					0xad20
+#define PM3FBDestReadEnablesOr					0xad28
+	#define PM3FBDestReadEnables_E(e)		((e) & 0xff)
+	#define PM3FBDestReadEnables_E0				(1 << 0)
+	#define PM3FBDestReadEnables_E1				(1 << 1)
+	#define PM3FBDestReadEnables_E2				(1 << 2)
+	#define PM3FBDestReadEnables_E3				(1 << 3)
+	#define PM3FBDestReadEnables_E4				(1 << 4)
+	#define PM3FBDestReadEnables_E5				(1 << 5)
+	#define PM3FBDestReadEnables_E6				(1 << 6)
+	#define PM3FBDestReadEnables_E7				(1 << 7)
+	#define PM3FBDestReadEnables_R(r)		(((r) & 0xff) << 8)
+	#define PM3FBDestReadEnables_R0				(1 << 8)
+	#define PM3FBDestReadEnables_R1				(1 << 9)
+	#define PM3FBDestReadEnables_R2				(1 << 10)
+	#define PM3FBDestReadEnables_R3				(1 << 11)
+	#define PM3FBDestReadEnables_R4				(1 << 12)
+	#define PM3FBDestReadEnables_R5				(1 << 13)
+	#define PM3FBDestReadEnables_R6				(1 << 14)
+	#define PM3FBDestReadEnables_R7				(1 << 15)
+	#define PM3FBDestReadEnables_ReferenceAlpha(a)	(((a) & 0xff) << 24)
+
+#define PM3FBDestReadMode					0xaee0
+#define PM3FBDestReadModeAnd					0xac90
+#define PM3FBDestReadModeOr					0xac98
+	#define PM3FBDestReadMode_ReadDisable			(0 << 0)
+	#define PM3FBDestReadMode_ReadEnable			(1 << 0)
+	#define PM3FBDestReadMode_StripePitch(sp)	(((sp) & 0x7) << 2)
+	#define PM3FBDestReadMode_StripeHeight(sh)	(((sh) & 0x7) << 7)
+	#define PM3FBDestReadMode_Enable0			(1 << 8)
+	#define PM3FBDestReadMode_Enable1			(1 << 9)
+	#define PM3FBDestReadMode_Enable2			(1 << 10)
+	#define PM3FBDestReadMode_Enable3			(1 << 11)
+	#define PM3FBDestReadMode_Layout0(l)		(((l) & 0x3) << 12)
+	#define PM3FBDestReadMode_Layout1(l)		(((l) & 0x3) << 14)
+	#define PM3FBDestReadMode_Layout2(l)		(((l) & 0x3) << 16)
+	#define PM3FBDestReadMode_Layout3(l)		(((l) & 0x3) << 18)
+	#define PM3FBDestReadMode_Origin0			(1 << 20)
+	#define PM3FBDestReadMode_Origin1			(1 << 21)
+	#define PM3FBDestReadMode_Origin2			(1 << 22)
+	#define PM3FBDestReadMode_Origin3			(1 << 23)
+	#define PM3FBDestReadMode_Blocking			(1 << 24)
+	#define PM3FBDestReadMode_UseReadEnabled		(1 << 26)
+	#define PM3FBDestReadMode_AlphaFiltering		(1 << 27)
+
+#define PM3FBHardwareWriteMask					0x8ac0
+#define PM3FBSoftwareWriteMask					0x8820
+#define PM3FBData						0x8aa0
+#define PM3FBSourceData						0x8aa8
+#define PM3FBSourceReadBufferAddr				0xaf08
+#define PM3FBSourceReadBufferOffset				0xaf10
+	#define PM3FBSourceReadBufferOffset_XOffset(x)	((x) & 0xffff)
+	#define PM3FBSourceReadBufferOffset_YOffset(y)	(((y) & 0xffff) << 16)
+#define PM3FBSourceReadBufferWidth				0xaf18
+	#define PM3FBSourceReadBufferWidth_Width(w)	((w) & 0x0fff)
+#define PM3FBSourceReadMode					0xaf00
+#define PM3FBSourceReadModeAnd					0xaca0
+#define PM3FBSourceReadModeOr					0xaca8
+	#define PM3FBSourceReadMode_ReadDisable			(0 << 0)
+	#define PM3FBSourceReadMode_ReadEnable			(1 << 0)
+	#define PM3FBSourceReadMode_StripePitch(sp)	(((sp) & 0x7) << 2)
+	#define PM3FBSourceReadMode_StripeHeight(sh)	(((sh) & 0x7) << 7)
+	#define PM3FBSourceReadMode_Layout(l)		(((l) & 0x3) << 8)
+	#define PM3FBSourceReadMode_Origin			(1 << 10)
+	#define PM3FBSourceReadMode_Blocking			(1 << 11)
+	#define PM3FBSourceReadMode_UserTexelCoord		(1 << 13)
+	#define PM3FBSourceReadMode_WrapXEnable			(1 << 14)
+	#define PM3FBSourceReadMode_WrapYEnable			(1 << 15)
+	#define PM3FBSourceReadMode_WrapX(w)		(((w) & 0xf) << 16)
+	#define PM3FBSourceReadMode_WrapY(w)		(((w) & 0xf) << 20)
+	#define PM3FBSourceReadMode_ExternalSourceData		(1 << 24)
+#define PM3FBWriteBufferAddr0					0xb000
+#define PM3FBWriteBufferAddr1					0xb008
+#define PM3FBWriteBufferAddr2					0xb010
+#define PM3FBWriteBufferAddr3					0xb018
+
+#define PM3FBWriteBufferOffset0					0xb020
+#define PM3FBWriteBufferOffset1					0xb028
+#define PM3FBWriteBufferOffset2					0xb030
+#define PM3FBWriteBufferOffset3					0xb038
+	#define PM3FBWriteBufferOffset_XOffset(x)	((x) & 0xffff)
+	#define PM3FBWriteBufferOffset_YOffset(y)	(((y) & 0xffff) << 16)
+
+#define PM3FBWriteBufferWidth0					0xb040
+#define PM3FBWriteBufferWidth1					0xb048
+#define PM3FBWriteBufferWidth2					0xb050
+#define PM3FBWriteBufferWidth3					0xb058
+	#define PM3FBWriteBufferWidth_Width(w)		((w) & 0x0fff)
+
+#define PM3FBWriteMode						0x8ab8
+#define PM3FBWriteModeAnd					0xacf0
+#define PM3FBWriteModeOr					0xacf8
+	#define PM3FBWriteMode_WriteDisable			(0 << 0)
+	#define PM3FBWriteMode_WriteEnable			(1 << 0)
+	#define PM3FBWriteMode_Replicate			(1 << 4)
+	#define PM3FBWriteMode_OpaqueSpan			(1 << 5)
+	#define PM3FBWriteMode_StripePitch(p)		(((p) & 0x7) << 6)
+	#define PM3FBWriteMode_StripeHeight(h)		(((h) & 0x7) << 9)
+	#define PM3FBWriteMode_Enable0				(1 << 12)
+	#define PM3FBWriteMode_Enable1				(1 << 13)
+	#define PM3FBWriteMode_Enable2				(1 << 14)
+	#define PM3FBWriteMode_Enable3				(1 << 15)
+	#define PM3FBWriteMode_Layout0(l)		(((l) & 0x3) << 16)
+	#define PM3FBWriteMode_Layout1(l)		(((l) & 0x3) << 18)
+	#define PM3FBWriteMode_Layout2(l)		(((l) & 0x3) << 20)
+	#define PM3FBWriteMode_Layout3(l)		(((l) & 0x3) << 22)
+	#define PM3FBWriteMode_Origin0				(1 << 24)
+	#define PM3FBWriteMode_Origin1				(1 << 25)
+	#define PM3FBWriteMode_Origin2				(1 << 26)
+	#define PM3FBWriteMode_Origin3				(1 << 27)
+#define PM3ForegroundColor					0xb0c0
+/* ... */
+#define PM3GIDMode						0xb538
+#define PM3GIDModeAnd						0xb5b0
+#define PM3GIDModeOr						0xb5b8
+/* ... */
+#define PM3LBDestReadBufferAddr					0xb510
+#define PM3LBDestReadBufferOffset				0xb518
+#define PM3LBDestReadEnables					0xb508
+#define PM3LBDestReadEnablesAnd					0xb590
+#define PM3LBDestReadEnablesOr					0xb598
+#define PM3LBDestReadMode					0xb500
+#define PM3LBDestReadModeAnd					0xb580
+#define PM3LBDestReadModeOr					0xb588
+	#define PM3LBDestReadMode_Disable			(0 << 0)
+	#define PM3LBDestReadMode_Enable			(1 << 0)
+	#define PM3LBDestReadMode_StripePitch(p)	(((p) & 0x7) << 2)
+	#define PM3LBDestReadMode_StripeHeight(h)	(((h) & 0x7) << 5)
+	#define PM3LBDestReadMode_Layout			(1 << 8)
+	#define PM3LBDestReadMode_Origin			(1 << 9)
+	#define PM3LBDestReadMode_UserReadEnables		(1 << 10)
+	#define PM3LBDestReadMode_Packed16			(1 << 11)
+	#define PM3LBDestReadMode_Width(w)		(((w) & 0xfff) << 12)
+#define PM3LBReadFormat						0x8888
+	#define PM3LBReadFormat_DepthWidth(w)		(((w) & 0x3) << 0)
+	#define PM3LBReadFormat_StencilWidth(w)		(((w) & 0xf) << 2)
+	#define PM3LBReadFormat_StencilPosition(p)	(((p) & 0x1f) << 6)
+	#define PM3LBReadFormat_FCPWidth(w)		(((w) & 0xf) << 11)
+	#define PM3LBReadFormat_FCPPosition(p)		(((p) & 0x1f) << 15)
+	#define PM3LBReadFormat_GIDWidth(w)		(((w) & 0x7) << 20)
+	#define PM3LBReadFormat_GIDPosition(p)		(((p) & 0x1f) << 23)
+#define PM3LBSourceReadBufferAddr				0xb528
+#define PM3LBSourceReadBufferOffset				0xb530
+#define PM3LBSourceReadMode					0xb520
+#define PM3LBSourceReadModeAnd					0xb5a0
+#define PM3LBSourceReadModeOr					0xb5a8
+	#define PM3LBSourceReadMode_Enable			(1 << 0)
+	#define PM3LBSourceReadMode_StripePitch(p)	(((p) & 0x7) << 2)
+	#define PM3LBSourceReadMode_StripeHeight(h)	(((h) & 0x7) << 5)
+	#define PM3LBSourceReadMode_Layout			(1 << 8)
+	#define PM3LBSourceReadMode_Origin			(1 << 9)
+	#define PM3LBSourceReadMode_Packed16			(1 << 10)
+	#define PM3LBSourceReadMode_Width(w)		(((w) & 0xfff) << 11)
+#define PM3LBStencil						0x88a8
+#define PM3LBWriteBufferAddr					0xb540
+#define PM3LBWriteBufferOffset					0xb548
+#define PM3LBWriteFormat					0x88c8
+	#define PM3LBWriteFormat_DepthWidth(w)		(((w) & 0x3) << 0)
+	#define PM3LBWriteFormat_StencilWidth(w)	(((w) & 0xf) << 2)
+	#define PM3LBWriteFormat_StencilPosition(p)	(((p) & 0x1f) << 6)
+	#define PM3LBWriteFormat_GIDWidth(w)		(((w) & 0x7) << 20)
+	#define PM3LBWriteFormat_GIDPosition(p)		(((p) & 0x1f) << 23)
+#define PM3LBWriteMode						0x88c0
+#define PM3LBWriteModeAnd					0xac80
+#define PM3LBWriteModeOr					0xac88
+	#define PM3LBWriteMode_WriteDisable			(0 << 0)
+	#define PM3LBWriteMode_WriteEnable			(1 << 0)
+	#define PM3LBWriteMode_StripePitch(p)		(((p) & 0x7) << 3)
+	#define PM3LBWriteMode_StripeHeight(h)		(((h) & 0x7) << 6)
+	#define PM3LBWriteMode_Layout				(1 << 9)
+	#define PM3LBWriteMode_Origin				(1 << 10)
+	#define PM3LBWriteMode_Packed16				(1 << 11)
+	#define PM3LBWriteMode_Width(w)			(((w) & 0xfff) << 12)
+/* ... */
+#define PM3LineStippleMode					0x81a8
+#define PM3LineStippleModeAnd					0xabc0
+#define PM3LineStippleModeOr					0xabc8
+#define PM3LoadLineStippleCounters				0x81b0
+/* ... */
+#define PM3LogicalOpMode					0x8828
+#define PM3LogicalOpModeAnd					0xace0
+#define PM3LogicalOpModeOr					0xace8
+	#define PM3LogicalOpMode_Disable			(0 << 0)
+	#define PM3LogicalOpMode_Enable				(1 << 0)
+	#define PM3LogicalOpMode_LogicOp(op)		(((op) & 0xf) << 1)
+	#define PM3LogicalOpMode_UseConstantWriteData_Disable	(0 << 5)
+	#define PM3LogicalOpMode_UseConstantWriteData_Enable	(1 << 5)
+	#define PM3LogicalOpMode_Background_Disable		(0 << 6)
+	#define PM3LogicalOpMode_Background_Enable		(1 << 6)
+	#define PM3LogicalOpMode_Background_LogicOp(op)	(((op) & 0xf) << 7)
+	#define PM3LogicalOpMode_UseConstantSource_Disable	(0 << 11)
+	#define PM3LogicalOpMode_UseConstantSource_Enable	(1 << 11)
+/* ... */
+#define PM3LUT							0x8e80
+#define PM3LUTAddress						0x84d0
+#define PM3LUTData						0x84c8
+#define PM3LUTIndex						0x84c0
+#define PM3LUTMode						0xb378
+#define PM3LUTModeAnd						0xad70
+#define PM3LUTModeOr						0xad78
+#define PM3LUTTransfer						0x84d8
+/* ... */
+#define PM3PixelSize						0x80c0
+	#define PM3PixelSize_GLOBAL_32BIT			(0 << 0)
+	#define PM3PixelSize_GLOBAL_16BIT			(1 << 0)
+	#define PM3PixelSize_GLOBAL_8BIT			(2 << 0)
+	#define PM3PixelSize_RASTERIZER_32BIT			(0 << 2)
+	#define PM3PixelSize_RASTERIZER_16BIT			(1 << 2)
+	#define PM3PixelSize_RASTERIZER_8BIT			(2 << 2)
+	#define PM3PixelSize_SCISSOR_AND_STIPPLE_32BIT		(0 << 4)
+	#define PM3PixelSize_SCISSOR_AND_STIPPLE_16BIT		(1 << 4)
+	#define PM3PixelSize_SCISSOR_AND_STIPPLE_8BIT		(2 << 4)
+	#define PM3PixelSize_TEXTURE_32BIT			(0 << 6)
+	#define PM3PixelSize_TEXTURE_16BIT			(1 << 6)
+	#define PM3PixelSize_TEXTURE_8BIT			(2 << 6)
+	#define PM3PixelSize_LUT_32BIT				(0 << 8)
+	#define PM3PixelSize_LUT_16BIT				(1 << 8)
+	#define PM3PixelSize_LUT_8BIT				(2 << 8)
+	#define PM3PixelSize_FRAMEBUFFER_32BIT			(0 << 10)
+	#define PM3PixelSize_FRAMEBUFFER_16BIT			(1 << 10)
+	#define PM3PixelSize_FRAMEBUFFER_8BIT			(2 << 10)
+	#define PM3PixelSize_LOGICAL_OP_32BIT			(0 << 12)
+	#define PM3PixelSize_LOGICAL_OP_16BIT			(1 << 12)
+	#define PM3PixelSize_LOGICAL_OP_8BIT			(2 << 12)
+	#define PM3PixelSize_LOCALBUFFER_32BIT			(0 << 14)
+	#define PM3PixelSize_LOCALBUFFER_16BIT			(1 << 14)
+	#define PM3PixelSize_LOCALBUFFER_8BIT			(2 << 14)
+	#define PM3PixelSize_SETUP_32BIT			(0 << 16)
+	#define PM3PixelSize_SETUP_16BIT			(1 << 16)
+	#define PM3PixelSize_SETUP_8BIT				(2 << 16)
+	#define PM3PixelSize_GLOBAL				(0 << 31)
+	#define PM3PixelSize_INDIVIDUAL				(1 << 31)
+/* ... */
+#define PM3Render						0x8038
+	#define PM3Render_AreaStipple_Disable			(0 << 0)
+	#define PM3Render_AreaStipple_Enable			(1 << 0)
+	#define PM3Render_LineStipple_Disable			(0 << 1)
+	#define PM3Render_LineStipple_Enable			(1 << 1)
+	#define PM3Render_ResetLine_Disable			(0 << 2)
+	#define PM3Render_ResetLine_Enable			(1 << 2)
+	#define PM3Render_FastFill_Disable			(0 << 3)
+	#define PM3Render_FastFill_Enable			(1 << 3)
+	#define PM3Render_Primitive_Line			(0 << 6)
+	#define PM3Render_Primitive_Trapezoid			(1 << 6)
+	#define PM3Render_Primitive_Point			(2 << 6)
+	#define PM3Render_Antialias_Disable			(0 << 8)
+	#define PM3Render_Antialias_Enable			(1 << 8)
+	#define PM3Render_Antialias_SubPixelRes_4x4		(0 << 9)
+	#define PM3Render_Antialias_SubPixelRes_8x8		(1 << 9)
+	#define PM3Render_UsePointTable_Disable			(0 << 10)
+	#define PM3Render_UsePointTable_Enable			(1 << 10)
+	#define PM3Render_SyncOnbitMask_Disable			(0 << 11)
+	#define PM3Render_SyncOnBitMask_Enable			(1 << 11)
+	#define PM3Render_SyncOnHostData_Disable		(0 << 12)
+	#define PM3Render_SyncOnHostData_Enable			(1 << 12)
+	#define PM3Render_Texture_Disable			(0 << 13)
+	#define PM3Render_Texture_Enable			(1 << 13)
+	#define PM3Render_Fog_Disable				(0 << 14)
+	#define PM3Render_Fog_Enable				(1 << 14)
+	#define PM3Render_Coverage_Disable			(0 << 15)
+	#define PM3Render_Coverage_Enable			(1 << 15)
+	#define PM3Render_SubPixelCorrection_Disable		(0 << 16)
+	#define PM3Render_SubPixelCorrection_Enable		(1 << 16)
+	#define PM3Render_SpanOperation_Disable			(0 << 18)
+	#define PM3Render_SpanOperation_Enable			(1 << 18)
+	#define PM3Render_FBSourceRead_Disable			(0 << 27)
+	#define PM3Render_FBSourceRead_Enable			(1 << 27)
+#define PM3RasterizerMode					0x80a0
+#define PM3RasterizerModeAnd					0xaba0
+#define PM3RasterizerModeOr					0xaba8
+#define PM3RectangleHeight					0x94e0
+#define PM3RepeatLine						0x9328
+#define PM3ResetPickResult					0x8c20
+#define PM3RLEMask						0x8c48
+#define PM3RouterMode						0x8840
+#define PM3RStart						0x8780
+#define PM3S1Start						0x8400
+#define PM3aveLineStippleCounters				0x81c0
+#define PM3ScissorMaxXY						0x8190
+#define PM3ScissorMinXY						0x8188
+#define PM3ScissorMode						0x8180
+#define PM3ScissorModeAnd					0xabb0
+#define PM3ScissorModeOr					0xabb8
+#define PM3ScreenSize						0x8198
+#define PM3Security						0x8908
+#define PM3SetLogicalTexturePage				0xb360
+#define PM3SizeOfFramebuffer					0xb0a8
+#define PM3SStart						0x8388
+#define PM3StartXDom						0x8000
+#define PM3StartXSub						0x8010
+#define PM3StartY						0x8020
+/* ... */
+#define PM3SpanColorMask					0x8168
+/* ... */
+#define PM3TextureApplicationMode				0x8680
+#define PM3TextureApplicationModeAnd				0xac50
+#define PM3TextureApplicationModeOr				0xac58
+#define PM3TextureBaseAddr					0x8500
+#define PM3TextureCacheControl					0x8490
+#define PM3TextureChromaLower0					0x84f0
+#define PM3TextureChromaLower1					0x8608
+#define PM3TextureChromaUpper0					0x84e8
+#define PM3TextureChromaUpper1					0x8600
+#define PM3TextureCompositeAlphaMode0				0xb310
+#define PM3TextureCompositeAlphaMode0And			0xb390
+#define PM3TextureCompositeAlphaMode0Or				0xb398
+#define PM3TextureCompositeAlphaMode1				0xb320
+#define PM3TextureCompositeAlphaMode1And			0xb3b0
+#define PM3TextureCompositeAlphaMode1Or				0xb3b8
+#define PM3TextureCompositeColorMode0				0xb308
+#define PM3TextureCompositeColorMode0And			0xb380
+#define PM3TextureCompositeColorMode0Or				0xb388
+#define PM3TextureCompositeColorMode1				0xb318
+#define PM3TextureCompositeColorMode1And			0xb3a0
+#define PM3TextureCompositeColorMode1Or				0xb3a8
+#define PM3TextureCompositeFactor0				0xb328
+#define PM3TextureCompositeFactor1				0xb330
+#define PM3TextureCompositeMode					0xb300
+#define PM3TextureCoordMode					0x8380
+#define PM3TextureCoordModeAnd					0xac20
+#define PM3TextureCoordModeOr					0xac28
+#define PM3TextureData						0x88e8
+/*
+#define PM3TextureDownloadControl				0x0108
+*/
+#define PM3TextureDownloadOffset				0x88f0
+#define PM3TextureEnvColor					0x8688
+#define PM3TextureFilterMode					0x84e0
+#define PM3TextureFilterModeAnd					0xad50
+#define PM3TextureFilterModeOr					0xad58
+#define PM3TextureIndexMode0					0xb338
+#define PM3TextureIndexMode0And					0xb3c0
+#define PM3TextureIndexMode0Or					0xb3c8
+#define PM3TextureIndexMode1					0xb340
+#define PM3TextureIndexMode1And					0xb3d0
+#define PM3TextureIndexMode1Or					0xb3d8
+/* ... */
+#define PM3TextureMapSize					0xb428
+#define PM3TextureMapWidth0					0x8580
+#define PM3TextureMapWidth1					0x8588
+	#define PM3TextureMapWidth_Width(w)		(((w) & 0xfff) << 0)
+	#define PM3TextureMapWidth_BorderLayout			(1 << 12)
+	#define PM3TextureMapWidth_Layout_Linear		(0 << 13)
+	#define PM3TextureMapWidth_Layout_Patch64		(1 << 13)
+	#define PM3TextureMapWidth_Layout_Patch32_2		(2 << 13)
+	#define PM3TextureMapWidth_Layout_Patch2		(3 << 13)
+	#define PM3TextureMapWidth_HostTexture			(1 << 15)
+#define PM3TextureReadMode0					0xb400
+#define PM3TextureReadMode0And					0xac30
+#define PM3TextureReadMode0Or					0xac38
+#define PM3TextureReadMode1					0xb408
+#define PM3TextureReadMode1And					0xad40
+#define PM3TextureReadMode1Or					0xad48
+/* ... */
+#define PM3WaitForCompletion					0x80b8
+#define PM3Window						0x8980
+	#define PM3Window_ForceLBUpdate				(1 << 3)
+	#define PM3Window_LBUpdateSource			(1 << 4)
+	#define PM3Window_FrameCount(c)			(((c) & 0xff) << 9)
+	#define PM3Window_StencilFCP				(1 << 17)
+	#define PM3Window_DepthFCP				(1 << 18)
+	#define PM3Window_OverrideWriteFiltering		(1 << 19)
+#define PM3WindowAnd						0xab80
+#define PM3WindowOr						0xab88
+#define PM3WindowOrigin						0x81c8
+#define PM3XBias						0x9480
+#define PM3YBias						0x9488
+#define PM3YLimits						0x80a8
+#define PM3UVMode						0x8f00
+#define PM3ZFogBias						0x86b8
+#define PM3ZStart						0xadd8
+#define PM3ZStartL						0x89b8
+#define PM3ZStartU						0x89b0
+
+
+/**********************************************
+*  GLINT Permedia3 2D setup Unit	      *
+***********************************************/
+#define PM3Config2D						0xb618
+	#define PM3Config2D_OpaqueSpan				(1 << 0)
+	#define PM3Config2D_MultiRXBlit				(1 << 1)
+	#define PM3Config2D_UserScissorEnable			(1 << 2)
+	#define PM3Config2D_FBDestReadEnable			(1 << 3)
+	#define PM3Config2D_AlphaBlendEnable			(1 << 4)
+	#define PM3Config2D_DitherEnable			(1 << 5)
+	#define PM3Config2D_ForegroundROPEnable			(1 << 6)
+	#define PM3Config2D_ForegroundROP(rop)		(((rop) & 0xf) << 7)
+	#define PM3Config2D_BackgroundROPEnable			(1 << 11)
+	#define PM3Config2D_BackgroundROP(rop)		(((rop) & 0xf) << 12)
+	#define PM3Config2D_UseConstantSource			(1 << 16)
+	#define PM3Config2D_FBWriteEnable			(1 << 17)
+	#define PM3Config2D_Blocking				(1 << 18)
+	#define PM3Config2D_ExternalSourceData			(1 << 19)
+	#define PM3Config2D_LUTModeEnable			(1 << 20)
+#define PM3DownloadGlyphwidth					0xb658
+	#define PM3DownloadGlyphwidth_GlyphWidth(gw)	((gw) & 0xffff)
+#define PM3DownloadTarget					0xb650
+	#define PM3DownloadTarget_TagName(tag)		((tag) & 0x1fff)
+#define PM3GlyphData						0xb660
+#define PM3GlyphPosition					0xb608
+	#define PM3GlyphPosition_XOffset(x)		((x) & 0xffff)
+	#define PM3GlyphPosition_YOffset(y)		(((y) & 0xffff) << 16)
+#define PM3Packed4Pixels					0xb668
+#define PM3Packed8Pixels					0xb630
+#define PM3Packed16Pixels					0xb638
+#define PM3RectanglePosition					0xb600
+	#define PM3RectanglePosition_XOffset(x)		((x) & 0xffff)
+	#define PM3RectanglePosition_YOffset(y)		(((y) & 0xffff) << 16)
+#define PM3Render2D						0xb640
+	#define PM3Render2D_Width(w)			((w) & 0x0fff)
+	#define PM3Render2D_Operation_Normal			(0 << 12)
+	#define PM3Render2D_Operation_SyncOnHostData		(1 << 12)
+	#define PM3Render2D_Operation_SyncOnBitMask		(2 << 12)
+	#define PM3Render2D_Operation_PatchOrderRendering	(3 << 12)
+	#define PM3Render2D_FBSourceReadEnable			(1 << 14)
+	#define PM3Render2D_SpanOperation			(1 << 15)
+	#define PM3Render2D_Height(h)			(((h) & 0x0fff) << 16)
+	#define PM3Render2D_XPositive				(1 << 28)
+	#define PM3Render2D_YPositive				(1 << 29)
+	#define PM3Render2D_AreaStippleEnable			(1 << 30)
+	#define PM3Render2D_TextureEnable			(1 << 31)
+#define PM3Render2DGlyph					0xb648
+	#define PM3Render2DGlyph_Width(w)		((w) & 0x7f)
+	#define PM3Render2DGlyph_Height(h)		(((h) & 0x7f) << 7)
+	#define PM3Render2DGlyph_XOffset(x)		(((x) & 0x1ff) << 14)
+	#define PM3Render2DGlyph_YOffset(y)		(((y) & 0x1ff) << 23)
+#define PM3RenderPatchOffset					0xb610
+	#define PM3RenderPatchOffset_XOffset(x)		((x) & 0xffff)
+	#define PM3RenderPatchOffset_YOffset(y)		(((y) & 0xffff) << 16)
+#define PM3RLCount						0xb678
+	#define PM3RLCount_Count(c)			((c) & 0x0fff)
+#define PM3RLData						0xb670
+
+/**********************************************
+*  GLINT Permedia3 Alias Register	     *
+***********************************************/
+#define PM3FillBackgroundColor					0x8330
+#define PM3FillConfig2D0					0x8338
+#define PM3FillConfig2D1					0x8360
+	#define PM3FillConfig2D_OpaqueSpan			(1 << 0)
+	#define PM3FillConfig2D_MultiRXBlit			(1 << 1)
+	#define PM3FillConfig2D_UserScissorEnable		(1 << 2)
+	#define PM3FillConfig2D_FBDestReadEnable		(1 << 3)
+	#define PM3FillConfig2D_AlphaBlendEnable		(1 << 4)
+	#define PM3FillConfig2D_DitherEnable			(1 << 5)
+	#define PM3FillConfig2D_ForegroundROPEnable		(1 << 6)
+	#define PM3FillConfig2D_ForegroundROP(rop)	(((rop) & 0xf) << 7)
+	#define PM3FillConfig2D_BackgroundROPEnable		(1 << 11)
+	#define PM3FillConfig2D_BackgroundROP(rop)	(((rop) & 0xf) << 12)
+	#define PM3FillConfig2D_UseConstantSource		(1 << 16)
+	#define PM3FillConfig2D_FBWriteEnable			(1 << 17)
+	#define PM3FillConfig2D_Blocking			(1 << 18)
+	#define PM3FillConfig2D_ExternalSourceData		(1 << 19)
+	#define PM3FillConfig2D_LUTModeEnable			(1 << 20)
+#define PM3FillFBDestReadBufferAddr				0x8310
+#define PM3FillFBSourceReadBufferAddr				0x8308
+#define PM3FillFBSourceReadBufferOffset				0x8340
+	#define PM3FillFBSourceReadBufferOffset_XOffset(x) ((x) & 0xffff)
+	#define PM3FillFBSourceReadBufferOffset_YOffset(y)	\
+						(((y) & 0xffff) << 16)
+#define PM3FillFBWriteBufferAddr				0x8300
+#define PM3FillForegroundColor0					0x8328
+#define PM3FillForegroundColor1					0x8358
+#define PM3FillGlyphPosition					0x8368
+	#define PM3FillGlyphPosition_XOffset(x)		((x) & 0xffff)
+	#define PM3FillGlyphPosition_YOffset(y)		(((y) & 0xffff) << 16)
+#define PM3FillRectanglePosition				0x8348
+	#define PM3FillRectanglePosition_XOffset(x)	((x) & 0xffff)
+	#define PM3FillRectanglePosition_YOffset(y)	(((y) & 0xffff) << 16)
+
+/* a few more useful registers & regs value... */
+#define PM3Sync							0x8c40
+	#define PM3Sync_Tag					0x188
+#define PM3FilterMode						0x8c00
+	#define PM3FilterModeSync				0x400
+#define PM3OutputFifo						0x2000
+#define PM3StatisticMode					0x8c08
+#define PM3AreaStippleMode					0x81a0
+#define AreaStipplePattern_indexed(i)		(0x8200 + ((i) * 0x8))
+
+#define PM3DepthMode						0x89a0
+#define PM3StencilMode						0x8988
+#define PM3StencilData						0x8990
+#define PM3TextureReadMode					0x8670
+#define PM3FogMode						0x8690
+#define PM3ChromaTestMode					0x8f18
+#define PM3YUVMode						0x8f00
+#define PM3BitMaskPattern					0x8068
+
+/* ***************************** */
+/* ***** pm3fb IOCTL const ***** */
+/* ***************************** */
+#define PM3FBIO_RESETCHIP		0x504D33FF /* 'PM3\377' */
+
+/* ***************************************** */
+/* ***** pm3fb useful define and macro ***** */
+/* ***************************************** */
+
+/* fifo size in chip */
+#define PM3_FIFO_SIZE						120
+#define PM3_REGS_SIZE						0x10000
+#define PM3_MAX_PIXCLOCK					300000
+
+#endif /* PM3FB_H */
diff --git a/include/video/pmag-ba-fb.h b/include/video/pmag-ba-fb.h
new file mode 100644
index 00000000..fceb6c0f
--- /dev/null
+++ b/include/video/pmag-ba-fb.h
@@ -0,0 +1,27 @@
+/*
+ *	linux/include/video/pmag-ba-fb.h
+ *
+ *	TURBOchannel PMAG-BA Color Frame Buffer (CFB) card support,
+ *	Copyright (C) 1999, 2000, 2001 by
+ *	Michael Engel <engel@unix-ag.org>,
+ *	Karsten Merker <merker@linuxtag.org>
+ *	Copyright (c) 2005  Maciej W. Rozycki
+ *
+ *	This file is subject to the terms and conditions of the GNU General
+ *	Public License.  See the file COPYING in the main directory of this
+ *	archive for more details.
+ */
+
+/* IOmem resource offsets.  */
+#define PMAG_BA_FBMEM		0x000000	/* frame buffer */
+#define PMAG_BA_BT459		0x200000	/* Bt459 RAMDAC */
+#define PMAG_BA_IRQ		0x300000	/* IRQ acknowledge */
+#define PMAG_BA_ROM		0x380000	/* REX option ROM */
+#define PMAG_BA_BT438		0x380000	/* Bt438 clock chip reset */
+#define PMAG_BA_SIZE		0x400000	/* address space size */
+
+/* Bt459 register offsets, byte-wide registers.  */
+#define BT459_ADDR_LO		0x0		/* address low */
+#define BT459_ADDR_HI		0x4		/* address high */
+#define BT459_DATA		0x8		/* data window register */
+#define BT459_CMAP		0xc		/* color map window register */
diff --git a/include/video/pmagb-b-fb.h b/include/video/pmagb-b-fb.h
new file mode 100644
index 00000000..7539b908
--- /dev/null
+++ b/include/video/pmagb-b-fb.h
@@ -0,0 +1,58 @@
+/*
+ *	linux/include/video/pmagb-b-fb.h
+ *
+ *	TURBOchannel PMAGB-B Smart Frame Buffer (SFB) card support,
+ *	Copyright (C) 1999, 2000, 2001 by
+ *	Michael Engel <engel@unix-ag.org> and
+ *	Karsten Merker <merker@linuxtag.org>
+ *	Copyright (c) 2005  Maciej W. Rozycki
+ *
+ *	This file is subject to the terms and conditions of the GNU General
+ *	Public License.  See the file COPYING in the main directory of this
+ *	archive for more details.
+ */
+
+/* IOmem resource offsets.  */
+#define PMAGB_B_ROM		0x000000	/* REX option ROM */
+#define PMAGB_B_SFB		0x100000	/* SFB ASIC */
+#define PMAGB_B_GP0		0x140000	/* general purpose output 0 */
+#define PMAGB_B_GP1		0x180000	/* general purpose output 1 */
+#define PMAGB_B_BT459		0x1c0000	/* Bt459 RAMDAC */
+#define PMAGB_B_FBMEM		0x200000	/* frame buffer */
+#define PMAGB_B_SIZE		0x400000	/* address space size */
+
+/* IOmem register offsets.  */
+#define SFB_REG_VID_HOR		0x64		/* video horizontal setup */
+#define SFB_REG_VID_VER		0x68		/* video vertical setup */
+#define SFB_REG_VID_BASE	0x6c		/* video base address */
+#define SFB_REG_TCCLK_COUNT	0x78		/* TURBOchannel clock count */
+#define SFB_REG_VIDCLK_COUNT	0x7c		/* video clock count */
+
+/* Video horizontal setup register constants.  All bits are r/w.  */
+#define SFB_VID_HOR_BP_SHIFT	0x15		/* back porch */
+#define SFB_VID_HOR_BP_MASK	0x7f
+#define SFB_VID_HOR_SYN_SHIFT	0x0e		/* sync pulse */
+#define SFB_VID_HOR_SYN_MASK	0x7f
+#define SFB_VID_HOR_FP_SHIFT	0x09		/* front porch */
+#define SFB_VID_HOR_FP_MASK	0x1f
+#define SFB_VID_HOR_PIX_SHIFT	0x00		/* active video */
+#define SFB_VID_HOR_PIX_MASK	0x1ff
+
+/* Video vertical setup register constants.  All bits are r/w.  */
+#define SFB_VID_VER_BP_SHIFT	0x16		/* back porch */
+#define SFB_VID_VER_BP_MASK	0x3f
+#define SFB_VID_VER_SYN_SHIFT	0x10		/* sync pulse */
+#define SFB_VID_VER_SYN_MASK	0x3f
+#define SFB_VID_VER_FP_SHIFT	0x0b		/* front porch */
+#define SFB_VID_VER_FP_MASK	0x1f
+#define SFB_VID_VER_SL_SHIFT	0x00		/* active scan lines */
+#define SFB_VID_VER_SL_MASK	0x7ff
+
+/* Video base address register constants.  All bits are r/w.  */
+#define SFB_VID_BASE_MASK	0x1ff		/* video base row address */
+
+/* Bt459 register offsets, byte-wide registers.  */
+#define BT459_ADDR_LO		0x0		/* address low */
+#define BT459_ADDR_HI		0x4		/* address high */
+#define BT459_DATA		0x8		/* data window register */
+#define BT459_CMAP		0xc		/* color map window register */
diff --git a/include/video/pxa168fb.h b/include/video/pxa168fb.h
new file mode 100644
index 00000000..8c2f385a
--- /dev/null
+++ b/include/video/pxa168fb.h
@@ -0,0 +1,125 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/pxa168fb.h
+ *
+ *  Copyright (C) 2009 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_PXA168FB_H
+#define __ASM_MACH_PXA168FB_H
+
+#include <linux/fb.h>
+#include <linux/interrupt.h>
+
+/* Dumb interface */
+#define PIN_MODE_DUMB_24		0
+#define PIN_MODE_DUMB_18_SPI		1
+#define PIN_MODE_DUMB_18_GPIO		2
+#define PIN_MODE_DUMB_16_SPI		3
+#define PIN_MODE_DUMB_16_GPIO		4
+#define PIN_MODE_DUMB_12_SPI_GPIO	5
+#define PIN_MODE_SMART_18_SPI		6
+#define PIN_MODE_SMART_16_SPI		7
+#define PIN_MODE_SMART_8_SPI_GPIO	8
+
+/* Dumb interface pin allocation */
+#define DUMB_MODE_RGB565		0
+#define DUMB_MODE_RGB565_UPPER		1
+#define DUMB_MODE_RGB666		2
+#define DUMB_MODE_RGB666_UPPER		3
+#define DUMB_MODE_RGB444		4
+#define DUMB_MODE_RGB444_UPPER		5
+#define DUMB_MODE_RGB888		6
+
+/* default fb buffer size WVGA-32bits */
+#define DEFAULT_FB_SIZE	(800 * 480 * 4)
+
+/*
+ * Buffer pixel format
+ * bit0 is for rb swap.
+ * bit12 is for Y UorV swap
+ */
+#define PIX_FMT_RGB565		0
+#define PIX_FMT_BGR565		1
+#define PIX_FMT_RGB1555		2
+#define PIX_FMT_BGR1555		3
+#define PIX_FMT_RGB888PACK	4
+#define PIX_FMT_BGR888PACK	5
+#define PIX_FMT_RGB888UNPACK	6
+#define PIX_FMT_BGR888UNPACK	7
+#define PIX_FMT_RGBA888		8
+#define PIX_FMT_BGRA888		9
+#define PIX_FMT_YUV422PACK	10
+#define PIX_FMT_YVU422PACK	11
+#define PIX_FMT_YUV422PLANAR	12
+#define PIX_FMT_YVU422PLANAR	13
+#define PIX_FMT_YUV420PLANAR	14
+#define PIX_FMT_YVU420PLANAR	15
+#define PIX_FMT_PSEUDOCOLOR	20
+#define PIX_FMT_UYVY422PACK	(0x1000|PIX_FMT_YUV422PACK)
+
+/*
+ * PXA LCD controller private state.
+ */
+struct pxa168fb_info {
+	struct device		*dev;
+	struct clk		*clk;
+	struct fb_info		*info;
+
+	void __iomem		*reg_base;
+	dma_addr_t		fb_start_dma;
+	u32			pseudo_palette[16];
+
+	int			pix_fmt;
+	unsigned		is_blanked:1;
+	unsigned		panel_rbswap:1;
+	unsigned		active:1;
+};
+
+/*
+ * PXA fb machine information
+ */
+struct pxa168fb_mach_info {
+	char	id[16];
+
+	int		num_modes;
+	struct fb_videomode *modes;
+
+	/*
+	 * Pix_fmt
+	 */
+	unsigned	pix_fmt;
+
+	/*
+	 * I/O pin allocation.
+	 */
+	unsigned	io_pin_allocation_mode:4;
+
+	/*
+	 * Dumb panel -- assignment of R/G/B component info to the 24
+	 * available external data lanes.
+	 */
+	unsigned	dumb_mode:4;
+	unsigned	panel_rgb_reverse_lanes:1;
+
+	/*
+	 * Dumb panel -- GPIO output data.
+	 */
+	unsigned	gpio_output_mask:8;
+	unsigned	gpio_output_data:8;
+
+	/*
+	 * Dumb panel -- configurable output signal polarity.
+	 */
+	unsigned	invert_composite_blank:1;
+	unsigned	invert_pix_val_ena:1;
+	unsigned	invert_pixclock:1;
+	unsigned	panel_rbswap:1;
+	unsigned	active:1;
+	unsigned	enable_lcd:1;
+};
+
+#endif /* __ASM_MACH_PXA168FB_H */
diff --git a/include/video/radeon.h b/include/video/radeon.h
new file mode 100644
index 00000000..56b188ab
--- /dev/null
+++ b/include/video/radeon.h
@@ -0,0 +1,1993 @@
+#ifndef _RADEON_H
+#define _RADEON_H
+
+
+#define RADEON_REGSIZE			0x4000
+
+
+#define MM_INDEX                               0x0000
+#define MM_DATA                                0x0004
+#define BUS_CNTL                               0x0030
+#define HI_STAT                                0x004C
+#define BUS_CNTL1                              0x0034
+#define I2C_CNTL_1			       0x0094
+#define CNFG_CNTL                              0x00E0
+#define CNFG_MEMSIZE                           0x00F8
+#define CNFG_APER_0_BASE                       0x0100
+#define CNFG_APER_1_BASE                       0x0104
+#define CNFG_APER_SIZE                         0x0108
+#define CNFG_REG_1_BASE                        0x010C
+#define CNFG_REG_APER_SIZE                     0x0110
+#define PAD_AGPINPUT_DELAY                     0x0164
+#define PAD_CTLR_STRENGTH                      0x0168
+#define PAD_CTLR_UPDATE                        0x016C
+#define PAD_CTLR_MISC                          0x0aa0
+#define AGP_CNTL                               0x0174
+#define BM_STATUS                              0x0160
+#define CAP0_TRIG_CNTL			       0x0950
+#define CAP1_TRIG_CNTL		               0x09c0
+#define VIPH_CONTROL			       0x0C40
+#define VENDOR_ID                              0x0F00
+#define DEVICE_ID                              0x0F02
+#define COMMAND                                0x0F04
+#define STATUS                                 0x0F06
+#define REVISION_ID                            0x0F08
+#define REGPROG_INF                            0x0F09
+#define SUB_CLASS                              0x0F0A
+#define BASE_CODE                              0x0F0B
+#define CACHE_LINE                             0x0F0C
+#define LATENCY                                0x0F0D
+#define HEADER                                 0x0F0E
+#define BIST                                   0x0F0F
+#define REG_MEM_BASE                           0x0F10
+#define REG_IO_BASE                            0x0F14
+#define REG_REG_BASE                           0x0F18
+#define ADAPTER_ID                             0x0F2C
+#define BIOS_ROM                               0x0F30
+#define CAPABILITIES_PTR                       0x0F34
+#define INTERRUPT_LINE                         0x0F3C
+#define INTERRUPT_PIN                          0x0F3D
+#define MIN_GRANT                              0x0F3E
+#define MAX_LATENCY                            0x0F3F
+#define ADAPTER_ID_W                           0x0F4C
+#define PMI_CAP_ID                             0x0F50
+#define PMI_NXT_CAP_PTR                        0x0F51
+#define PMI_PMC_REG                            0x0F52
+#define PM_STATUS                              0x0F54
+#define PMI_DATA                               0x0F57
+#define AGP_CAP_ID                             0x0F58
+#define AGP_STATUS                             0x0F5C
+#define AGP_COMMAND                            0x0F60
+#define AIC_CTRL                               0x01D0
+#define AIC_STAT                               0x01D4
+#define AIC_PT_BASE                            0x01D8
+#define AIC_LO_ADDR                            0x01DC
+#define AIC_HI_ADDR                            0x01E0
+#define AIC_TLB_ADDR                           0x01E4
+#define AIC_TLB_DATA                           0x01E8
+#define DAC_CNTL                               0x0058
+#define DAC_CNTL2                              0x007c
+#define CRTC_GEN_CNTL                          0x0050
+#define MEM_CNTL                               0x0140
+#define MC_CNTL                                0x0140
+#define EXT_MEM_CNTL                           0x0144
+#define MC_TIMING_CNTL                         0x0144
+#define MC_AGP_LOCATION                        0x014C
+#define MEM_IO_CNTL_A0                         0x0178
+#define MEM_REFRESH_CNTL                       0x0178
+#define MEM_INIT_LATENCY_TIMER                 0x0154
+#define MC_INIT_GFX_LAT_TIMER                  0x0154
+#define MEM_SDRAM_MODE_REG                     0x0158
+#define AGP_BASE                               0x0170
+#define MEM_IO_CNTL_A1                         0x017C
+#define MC_READ_CNTL_AB                        0x017C
+#define MEM_IO_CNTL_B0                         0x0180
+#define MC_INIT_MISC_LAT_TIMER                 0x0180
+#define MEM_IO_CNTL_B1                         0x0184
+#define MC_IOPAD_CNTL                          0x0184
+#define MC_DEBUG                               0x0188
+#define MC_STATUS                              0x0150
+#define MEM_IO_OE_CNTL                         0x018C
+#define MC_CHIP_IO_OE_CNTL_AB                  0x018C
+#define MC_FB_LOCATION                         0x0148
+#define HOST_PATH_CNTL                         0x0130
+#define MEM_VGA_WP_SEL                         0x0038
+#define MEM_VGA_RP_SEL                         0x003C
+#define HDP_DEBUG                              0x0138
+#define SW_SEMAPHORE                           0x013C
+#define CRTC2_GEN_CNTL                         0x03f8
+#define CRTC2_DISPLAY_BASE_ADDR                0x033c
+#define SURFACE_CNTL                           0x0B00
+#define SURFACE0_LOWER_BOUND                   0x0B04
+#define SURFACE1_LOWER_BOUND                   0x0B14
+#define SURFACE2_LOWER_BOUND                   0x0B24
+#define SURFACE3_LOWER_BOUND                   0x0B34
+#define SURFACE4_LOWER_BOUND                   0x0B44
+#define SURFACE5_LOWER_BOUND                   0x0B54
+#define SURFACE6_LOWER_BOUND                   0x0B64
+#define SURFACE7_LOWER_BOUND                   0x0B74
+#define SURFACE0_UPPER_BOUND                   0x0B08
+#define SURFACE1_UPPER_BOUND                   0x0B18
+#define SURFACE2_UPPER_BOUND                   0x0B28
+#define SURFACE3_UPPER_BOUND                   0x0B38
+#define SURFACE4_UPPER_BOUND                   0x0B48
+#define SURFACE5_UPPER_BOUND                   0x0B58
+#define SURFACE6_UPPER_BOUND                   0x0B68
+#define SURFACE7_UPPER_BOUND                   0x0B78
+#define SURFACE0_INFO                          0x0B0C
+#define SURFACE1_INFO                          0x0B1C
+#define SURFACE2_INFO                          0x0B2C
+#define SURFACE3_INFO                          0x0B3C
+#define SURFACE4_INFO                          0x0B4C
+#define SURFACE5_INFO                          0x0B5C
+#define SURFACE6_INFO                          0x0B6C
+#define SURFACE7_INFO                          0x0B7C
+#define SURFACE_ACCESS_FLAGS                   0x0BF8
+#define SURFACE_ACCESS_CLR                     0x0BFC
+#define GEN_INT_CNTL                           0x0040
+#define GEN_INT_STATUS                         0x0044
+#define CRTC_EXT_CNTL                          0x0054
+#define RB3D_CNTL			       0x1C3C
+#define WAIT_UNTIL                             0x1720
+#define ISYNC_CNTL                             0x1724
+#define RBBM_GUICNTL                           0x172C
+#define RBBM_STATUS                            0x0E40
+#define RBBM_STATUS_alt_1                      0x1740
+#define RBBM_CNTL                              0x00EC
+#define RBBM_CNTL_alt_1                        0x0E44
+#define RBBM_SOFT_RESET                        0x00F0
+#define RBBM_SOFT_RESET_alt_1                  0x0E48
+#define NQWAIT_UNTIL                           0x0E50
+#define RBBM_DEBUG                             0x0E6C
+#define RBBM_CMDFIFO_ADDR                      0x0E70
+#define RBBM_CMDFIFO_DATAL                     0x0E74
+#define RBBM_CMDFIFO_DATAH                     0x0E78
+#define RBBM_CMDFIFO_STAT                      0x0E7C
+#define CRTC_STATUS                            0x005C
+#define GPIO_VGA_DDC                           0x0060
+#define GPIO_DVI_DDC                           0x0064
+#define GPIO_MONID                             0x0068
+#define GPIO_CRT2_DDC                          0x006c
+#define PALETTE_INDEX                          0x00B0
+#define PALETTE_DATA                           0x00B4
+#define PALETTE_30_DATA                        0x00B8
+#define CRTC_H_TOTAL_DISP                      0x0200
+#define CRTC_H_SYNC_STRT_WID                   0x0204
+#define CRTC_V_TOTAL_DISP                      0x0208
+#define CRTC_V_SYNC_STRT_WID                   0x020C
+#define CRTC_VLINE_CRNT_VLINE                  0x0210
+#define CRTC_CRNT_FRAME                        0x0214
+#define CRTC_GUI_TRIG_VLINE                    0x0218
+#define CRTC_DEBUG                             0x021C
+#define CRTC_OFFSET_RIGHT                      0x0220
+#define CRTC_OFFSET                            0x0224
+#define CRTC_OFFSET_CNTL                       0x0228
+#define CRTC_PITCH                             0x022C
+#define OVR_CLR                                0x0230
+#define OVR_WID_LEFT_RIGHT                     0x0234
+#define OVR_WID_TOP_BOTTOM                     0x0238
+#define DISPLAY_BASE_ADDR                      0x023C
+#define SNAPSHOT_VH_COUNTS                     0x0240
+#define SNAPSHOT_F_COUNT                       0x0244
+#define N_VIF_COUNT                            0x0248
+#define SNAPSHOT_VIF_COUNT                     0x024C
+#define FP_CRTC_H_TOTAL_DISP                   0x0250
+#define FP_CRTC_V_TOTAL_DISP                   0x0254
+#define CRT_CRTC_H_SYNC_STRT_WID               0x0258
+#define CRT_CRTC_V_SYNC_STRT_WID               0x025C
+#define CUR_OFFSET                             0x0260
+#define CUR_HORZ_VERT_POSN                     0x0264
+#define CUR_HORZ_VERT_OFF                      0x0268
+#define CUR_CLR0                               0x026C
+#define CUR_CLR1                               0x0270
+#define FP_HORZ_VERT_ACTIVE                    0x0278
+#define CRTC_MORE_CNTL                         0x027C
+#define CRTC_H_CUTOFF_ACTIVE_EN                (1<<4)
+#define CRTC_V_CUTOFF_ACTIVE_EN                (1<<5)
+#define DAC_EXT_CNTL                           0x0280
+#define FP_GEN_CNTL                            0x0284
+#define FP_HORZ_STRETCH                        0x028C
+#define FP_VERT_STRETCH                        0x0290
+#define FP_H_SYNC_STRT_WID                     0x02C4
+#define FP_V_SYNC_STRT_WID                     0x02C8
+#define AUX_WINDOW_HORZ_CNTL                   0x02D8
+#define AUX_WINDOW_VERT_CNTL                   0x02DC
+//#define DDA_CONFIG			       0x02e0
+//#define DDA_ON_OFF			       0x02e4
+#define DVI_I2C_CNTL_1			       0x02e4
+#define GRPH_BUFFER_CNTL                       0x02F0
+#define GRPH2_BUFFER_CNTL                      0x03F0
+#define VGA_BUFFER_CNTL                        0x02F4
+#define OV0_Y_X_START                          0x0400
+#define OV0_Y_X_END                            0x0404
+#define OV0_PIPELINE_CNTL                      0x0408
+#define OV0_REG_LOAD_CNTL                      0x0410
+#define OV0_SCALE_CNTL                         0x0420
+#define OV0_V_INC                              0x0424
+#define OV0_P1_V_ACCUM_INIT                    0x0428
+#define OV0_P23_V_ACCUM_INIT                   0x042C
+#define OV0_P1_BLANK_LINES_AT_TOP              0x0430
+#define OV0_P23_BLANK_LINES_AT_TOP             0x0434
+#define OV0_BASE_ADDR                          0x043C
+#define OV0_VID_BUF0_BASE_ADRS                 0x0440
+#define OV0_VID_BUF1_BASE_ADRS                 0x0444
+#define OV0_VID_BUF2_BASE_ADRS                 0x0448
+#define OV0_VID_BUF3_BASE_ADRS                 0x044C
+#define OV0_VID_BUF4_BASE_ADRS                 0x0450
+#define OV0_VID_BUF5_BASE_ADRS                 0x0454
+#define OV0_VID_BUF_PITCH0_VALUE               0x0460
+#define OV0_VID_BUF_PITCH1_VALUE               0x0464
+#define OV0_AUTO_FLIP_CNTRL                    0x0470
+#define OV0_DEINTERLACE_PATTERN                0x0474
+#define OV0_SUBMIT_HISTORY                     0x0478
+#define OV0_H_INC                              0x0480
+#define OV0_STEP_BY                            0x0484
+#define OV0_P1_H_ACCUM_INIT                    0x0488
+#define OV0_P23_H_ACCUM_INIT                   0x048C
+#define OV0_P1_X_START_END                     0x0494
+#define OV0_P2_X_START_END                     0x0498
+#define OV0_P3_X_START_END                     0x049C
+#define OV0_FILTER_CNTL                        0x04A0
+#define OV0_FOUR_TAP_COEF_0                    0x04B0
+#define OV0_FOUR_TAP_COEF_1                    0x04B4
+#define OV0_FOUR_TAP_COEF_2                    0x04B8
+#define OV0_FOUR_TAP_COEF_3                    0x04BC
+#define OV0_FOUR_TAP_COEF_4                    0x04C0
+#define OV0_FLAG_CNTRL                         0x04DC
+#define OV0_SLICE_CNTL                         0x04E0
+#define OV0_VID_KEY_CLR_LOW                    0x04E4
+#define OV0_VID_KEY_CLR_HIGH                   0x04E8
+#define OV0_GRPH_KEY_CLR_LOW                   0x04EC
+#define OV0_GRPH_KEY_CLR_HIGH                  0x04F0
+#define OV0_KEY_CNTL                           0x04F4
+#define OV0_TEST                               0x04F8
+#define SUBPIC_CNTL                            0x0540
+#define SUBPIC_DEFCOLCON                       0x0544
+#define SUBPIC_Y_X_START                       0x054C
+#define SUBPIC_Y_X_END                         0x0550
+#define SUBPIC_V_INC                           0x0554
+#define SUBPIC_H_INC                           0x0558
+#define SUBPIC_BUF0_OFFSET                     0x055C
+#define SUBPIC_BUF1_OFFSET                     0x0560
+#define SUBPIC_LC0_OFFSET                      0x0564
+#define SUBPIC_LC1_OFFSET                      0x0568
+#define SUBPIC_PITCH                           0x056C
+#define SUBPIC_BTN_HLI_COLCON                  0x0570
+#define SUBPIC_BTN_HLI_Y_X_START               0x0574
+#define SUBPIC_BTN_HLI_Y_X_END                 0x0578
+#define SUBPIC_PALETTE_INDEX                   0x057C
+#define SUBPIC_PALETTE_DATA                    0x0580
+#define SUBPIC_H_ACCUM_INIT                    0x0584
+#define SUBPIC_V_ACCUM_INIT                    0x0588
+#define DISP_MISC_CNTL                         0x0D00
+#define DAC_MACRO_CNTL                         0x0D04
+#define DISP_PWR_MAN                           0x0D08
+#define DISP_TEST_DEBUG_CNTL                   0x0D10
+#define DISP_HW_DEBUG                          0x0D14
+#define DAC_CRC_SIG1                           0x0D18
+#define DAC_CRC_SIG2                           0x0D1C
+#define OV0_LIN_TRANS_A                        0x0D20
+#define OV0_LIN_TRANS_B                        0x0D24
+#define OV0_LIN_TRANS_C                        0x0D28
+#define OV0_LIN_TRANS_D                        0x0D2C
+#define OV0_LIN_TRANS_E                        0x0D30
+#define OV0_LIN_TRANS_F                        0x0D34
+#define OV0_GAMMA_0_F                          0x0D40
+#define OV0_GAMMA_10_1F                        0x0D44
+#define OV0_GAMMA_20_3F                        0x0D48
+#define OV0_GAMMA_40_7F                        0x0D4C
+#define OV0_GAMMA_380_3BF                      0x0D50
+#define OV0_GAMMA_3C0_3FF                      0x0D54
+#define DISP_MERGE_CNTL                        0x0D60
+#define DISP_OUTPUT_CNTL                       0x0D64
+#define DISP_LIN_TRANS_GRPH_A                  0x0D80
+#define DISP_LIN_TRANS_GRPH_B                  0x0D84
+#define DISP_LIN_TRANS_GRPH_C                  0x0D88
+#define DISP_LIN_TRANS_GRPH_D                  0x0D8C
+#define DISP_LIN_TRANS_GRPH_E                  0x0D90
+#define DISP_LIN_TRANS_GRPH_F                  0x0D94
+#define DISP_LIN_TRANS_VID_A                   0x0D98
+#define DISP_LIN_TRANS_VID_B                   0x0D9C
+#define DISP_LIN_TRANS_VID_C                   0x0DA0
+#define DISP_LIN_TRANS_VID_D                   0x0DA4
+#define DISP_LIN_TRANS_VID_E                   0x0DA8
+#define DISP_LIN_TRANS_VID_F                   0x0DAC
+#define RMX_HORZ_FILTER_0TAP_COEF              0x0DB0
+#define RMX_HORZ_FILTER_1TAP_COEF              0x0DB4
+#define RMX_HORZ_FILTER_2TAP_COEF              0x0DB8
+#define RMX_HORZ_PHASE                         0x0DBC
+#define DAC_EMBEDDED_SYNC_CNTL                 0x0DC0
+#define DAC_BROAD_PULSE                        0x0DC4
+#define DAC_SKEW_CLKS                          0x0DC8
+#define DAC_INCR                               0x0DCC
+#define DAC_NEG_SYNC_LEVEL                     0x0DD0
+#define DAC_POS_SYNC_LEVEL                     0x0DD4
+#define DAC_BLANK_LEVEL                        0x0DD8
+#define CLOCK_CNTL_INDEX                       0x0008
+#define CLOCK_CNTL_DATA                        0x000C
+#define CP_RB_CNTL                             0x0704
+#define CP_RB_BASE                             0x0700
+#define CP_RB_RPTR_ADDR                        0x070C
+#define CP_RB_RPTR                             0x0710
+#define CP_RB_WPTR                             0x0714
+#define CP_RB_WPTR_DELAY                       0x0718
+#define CP_IB_BASE                             0x0738
+#define CP_IB_BUFSZ                            0x073C
+#define SCRATCH_REG0                           0x15E0
+#define GUI_SCRATCH_REG0                       0x15E0
+#define SCRATCH_REG1                           0x15E4
+#define GUI_SCRATCH_REG1                       0x15E4
+#define SCRATCH_REG2                           0x15E8
+#define GUI_SCRATCH_REG2                       0x15E8
+#define SCRATCH_REG3                           0x15EC
+#define GUI_SCRATCH_REG3                       0x15EC
+#define SCRATCH_REG4                           0x15F0
+#define GUI_SCRATCH_REG4                       0x15F0
+#define SCRATCH_REG5                           0x15F4
+#define GUI_SCRATCH_REG5                       0x15F4
+#define SCRATCH_UMSK                           0x0770
+#define SCRATCH_ADDR                           0x0774
+#define DP_BRUSH_FRGD_CLR                      0x147C
+#define DP_BRUSH_BKGD_CLR                      0x1478
+#define DST_LINE_START                         0x1600
+#define DST_LINE_END                           0x1604
+#define SRC_OFFSET                             0x15AC
+#define SRC_PITCH                              0x15B0
+#define SRC_TILE                               0x1704
+#define SRC_PITCH_OFFSET                       0x1428
+#define SRC_X                                  0x1414
+#define SRC_Y                                  0x1418
+#define SRC_X_Y                                0x1590
+#define SRC_Y_X                                0x1434
+#define DST_Y_X				       0x1438
+#define DST_WIDTH_HEIGHT		       0x1598
+#define DST_HEIGHT_WIDTH		       0x143c
+#define DST_OFFSET                             0x1404
+#define SRC_CLUT_ADDRESS                       0x1780
+#define SRC_CLUT_DATA                          0x1784
+#define SRC_CLUT_DATA_RD                       0x1788
+#define HOST_DATA0                             0x17C0
+#define HOST_DATA1                             0x17C4
+#define HOST_DATA2                             0x17C8
+#define HOST_DATA3                             0x17CC
+#define HOST_DATA4                             0x17D0
+#define HOST_DATA5                             0x17D4
+#define HOST_DATA6                             0x17D8
+#define HOST_DATA7                             0x17DC
+#define HOST_DATA_LAST                         0x17E0
+#define DP_SRC_ENDIAN                          0x15D4
+#define DP_SRC_FRGD_CLR                        0x15D8
+#define DP_SRC_BKGD_CLR                        0x15DC
+#define SC_LEFT                                0x1640
+#define SC_RIGHT                               0x1644
+#define SC_TOP                                 0x1648
+#define SC_BOTTOM                              0x164C
+#define SRC_SC_RIGHT                           0x1654
+#define SRC_SC_BOTTOM                          0x165C
+#define DP_CNTL                                0x16C0
+#define DP_CNTL_XDIR_YDIR_YMAJOR               0x16D0
+#define DP_DATATYPE                            0x16C4
+#define DP_MIX                                 0x16C8
+#define DP_WRITE_MSK                           0x16CC
+#define DP_XOP                                 0x17F8
+#define CLR_CMP_CLR_SRC                        0x15C4
+#define CLR_CMP_CLR_DST                        0x15C8
+#define CLR_CMP_CNTL                           0x15C0
+#define CLR_CMP_MSK                            0x15CC
+#define DSTCACHE_MODE                          0x1710
+#define DSTCACHE_CTLSTAT                       0x1714
+#define DEFAULT_PITCH_OFFSET                   0x16E0
+#define DEFAULT_SC_BOTTOM_RIGHT                0x16E8
+#define DEFAULT_SC_TOP_LEFT                    0x16EC
+#define SRC_PITCH_OFFSET                       0x1428
+#define DST_PITCH_OFFSET                       0x142C
+#define DP_GUI_MASTER_CNTL                     0x146C
+#define SC_TOP_LEFT                            0x16EC
+#define SC_BOTTOM_RIGHT                        0x16F0
+#define SRC_SC_BOTTOM_RIGHT                    0x16F4
+#define RB2D_DSTCACHE_MODE		       0x3428
+#define RB2D_DSTCACHE_CTLSTAT_broken	       0x342C /* do not use */
+#define LVDS_GEN_CNTL			       0x02d0
+#define LVDS_PLL_CNTL			       0x02d4
+#define FP2_GEN_CNTL                           0x0288
+#define TMDS_CNTL                              0x0294
+#define TMDS_CRC			       0x02a0
+#define TMDS_TRANSMITTER_CNTL		       0x02a4
+#define MPP_TB_CONFIG            	       0x01c0
+#define PAMAC0_DLY_CNTL                        0x0a94
+#define PAMAC1_DLY_CNTL                        0x0a98
+#define PAMAC2_DLY_CNTL                        0x0a9c
+#define FW_CNTL                                0x0118
+#define FCP_CNTL                               0x0910
+#define VGA_DDA_ON_OFF                         0x02ec
+#define TV_MASTER_CNTL                         0x0800
+
+//#define BASE_CODE			       0x0f0b
+#define BIOS_0_SCRATCH			       0x0010
+#define BIOS_1_SCRATCH			       0x0014
+#define BIOS_2_SCRATCH			       0x0018
+#define BIOS_3_SCRATCH			       0x001c
+#define BIOS_4_SCRATCH			       0x0020
+#define BIOS_5_SCRATCH			       0x0024
+#define BIOS_6_SCRATCH			       0x0028
+#define BIOS_7_SCRATCH			       0x002c
+
+#define HDP_SOFT_RESET                         (1 << 26)
+
+#define TV_DAC_CNTL                            0x088c
+#define GPIOPAD_MASK                           0x0198
+#define GPIOPAD_A                              0x019c
+#define GPIOPAD_EN                             0x01a0
+#define GPIOPAD_Y                              0x01a4
+#define ZV_LCDPAD_MASK                         0x01a8
+#define ZV_LCDPAD_A                            0x01ac
+#define ZV_LCDPAD_EN                           0x01b0
+#define ZV_LCDPAD_Y                            0x01b4
+
+/* PLL Registers */
+#define CLK_PIN_CNTL                               0x0001
+#define PPLL_CNTL                                  0x0002
+#define PPLL_REF_DIV                               0x0003
+#define PPLL_DIV_0                                 0x0004
+#define PPLL_DIV_1                                 0x0005
+#define PPLL_DIV_2                                 0x0006
+#define PPLL_DIV_3                                 0x0007
+#define VCLK_ECP_CNTL                              0x0008
+#define HTOTAL_CNTL                                0x0009
+#define M_SPLL_REF_FB_DIV                          0x000a
+#define AGP_PLL_CNTL                               0x000b
+#define SPLL_CNTL                                  0x000c
+#define SCLK_CNTL                                  0x000d
+#define MPLL_CNTL                                  0x000e
+#define MDLL_CKO                                   0x000f
+#define MDLL_RDCKA                                 0x0010
+#define MCLK_CNTL                                  0x0012
+#define AGP_PLL_CNTL                               0x000b
+#define PLL_TEST_CNTL                              0x0013
+#define CLK_PWRMGT_CNTL                            0x0014
+#define PLL_PWRMGT_CNTL                            0x0015
+#define MCLK_MISC                                  0x001f
+#define P2PLL_CNTL                                 0x002a
+#define P2PLL_REF_DIV                              0x002b
+#define PIXCLKS_CNTL                               0x002d
+#define SCLK_MORE_CNTL				   0x0035
+
+/* MCLK_CNTL bit constants */
+#define FORCEON_MCLKA				   (1 << 16)
+#define FORCEON_MCLKB         		   	   (1 << 17)
+#define FORCEON_YCLKA         	    	   	   (1 << 18)
+#define FORCEON_YCLKB         		   	   (1 << 19)
+#define FORCEON_MC            		   	   (1 << 20)
+#define FORCEON_AIC           		   	   (1 << 21)
+
+/* SCLK_CNTL bit constants */
+#define DYN_STOP_LAT_MASK			   0x00007ff8
+#define CP_MAX_DYN_STOP_LAT			   0x0008
+#define SCLK_FORCEON_MASK			   0xffff8000
+
+/* SCLK_MORE_CNTL bit constants */
+#define SCLK_MORE_FORCEON			   0x0700
+
+/* BUS_CNTL bit constants */
+#define BUS_DBL_RESYNC                             0x00000001
+#define BUS_MSTR_RESET                             0x00000002
+#define BUS_FLUSH_BUF                              0x00000004
+#define BUS_STOP_REQ_DIS                           0x00000008
+#define BUS_ROTATION_DIS                           0x00000010
+#define BUS_MASTER_DIS                             0x00000040
+#define BUS_ROM_WRT_EN                             0x00000080
+#define BUS_DIS_ROM                                0x00001000
+#define BUS_PCI_READ_RETRY_EN                      0x00002000
+#define BUS_AGP_AD_STEPPING_EN                     0x00004000
+#define BUS_PCI_WRT_RETRY_EN                       0x00008000
+#define BUS_MSTR_RD_MULT                           0x00100000
+#define BUS_MSTR_RD_LINE                           0x00200000
+#define BUS_SUSPEND                                0x00400000
+#define LAT_16X                                    0x00800000
+#define BUS_RD_DISCARD_EN                          0x01000000
+#define BUS_RD_ABORT_EN                            0x02000000
+#define BUS_MSTR_WS                                0x04000000
+#define BUS_PARKING_DIS                            0x08000000
+#define BUS_MSTR_DISCONNECT_EN                     0x10000000
+#define BUS_WRT_BURST                              0x20000000
+#define BUS_READ_BURST                             0x40000000
+#define BUS_RDY_READ_DLY                           0x80000000
+
+/* PIXCLKS_CNTL */
+#define PIX2CLK_SRC_SEL_MASK                       0x03
+#define PIX2CLK_SRC_SEL_CPUCLK                     0x00
+#define PIX2CLK_SRC_SEL_PSCANCLK                   0x01
+#define PIX2CLK_SRC_SEL_BYTECLK                    0x02
+#define PIX2CLK_SRC_SEL_P2PLLCLK                   0x03
+#define PIX2CLK_ALWAYS_ONb                         (1<<6)
+#define PIX2CLK_DAC_ALWAYS_ONb                     (1<<7)
+#define PIXCLK_TV_SRC_SEL                          (1 << 8)
+#define PIXCLK_LVDS_ALWAYS_ONb                     (1 << 14)
+#define PIXCLK_TMDS_ALWAYS_ONb                     (1 << 15)
+
+
+/* CLOCK_CNTL_INDEX bit constants */
+#define PLL_WR_EN                                  0x00000080
+
+/* CNFG_CNTL bit constants */
+#define CFG_VGA_RAM_EN                             0x00000100
+#define CFG_ATI_REV_ID_MASK			   (0xf << 16)
+#define CFG_ATI_REV_A11				   (0 << 16)
+#define CFG_ATI_REV_A12				   (1 << 16)
+#define CFG_ATI_REV_A13				   (2 << 16)
+
+/* CRTC_EXT_CNTL bit constants */
+#define VGA_ATI_LINEAR                             0x00000008
+#define VGA_128KAP_PAGING                          0x00000010
+#define	XCRT_CNT_EN				   (1 << 6)
+#define CRTC_HSYNC_DIS				   (1 << 8)
+#define CRTC_VSYNC_DIS				   (1 << 9)
+#define CRTC_DISPLAY_DIS			   (1 << 10)
+#define CRTC_CRT_ON				   (1 << 15)
+
+
+/* DSTCACHE_CTLSTAT bit constants */
+#define RB2D_DC_FLUSH_2D			   (1 << 0)
+#define RB2D_DC_FREE_2D				   (1 << 2)
+#define RB2D_DC_FLUSH_ALL			   (RB2D_DC_FLUSH_2D | RB2D_DC_FREE_2D)
+#define RB2D_DC_BUSY				   (1 << 31)
+
+/* DSTCACHE_MODE bits constants */
+#define RB2D_DC_AUTOFLUSH_ENABLE                   (1 << 8)
+#define RB2D_DC_DC_DISABLE_IGNORE_PE               (1 << 17)
+
+/* CRTC_GEN_CNTL bit constants */
+#define CRTC_DBL_SCAN_EN                           0x00000001
+#define CRTC_CUR_EN                                0x00010000
+#define CRTC_INTERLACE_EN			   (1 << 1)
+#define CRTC_BYPASS_LUT_EN     			   (1 << 14)
+#define CRTC_EXT_DISP_EN      			   (1 << 24)
+#define CRTC_EN					   (1 << 25)
+#define CRTC_DISP_REQ_EN_B                         (1 << 26)
+
+/* CRTC_STATUS bit constants */
+#define CRTC_VBLANK                                0x00000001
+
+/* CRTC2_GEN_CNTL bit constants */
+#define CRT2_ON                                    (1 << 7)
+#define CRTC2_DISPLAY_DIS                          (1 << 23)
+#define CRTC2_EN                                   (1 << 25)
+#define CRTC2_DISP_REQ_EN_B                        (1 << 26)
+
+/* CUR_OFFSET, CUR_HORZ_VERT_POSN, CUR_HORZ_VERT_OFF bit constants */
+#define CUR_LOCK                                   0x80000000
+
+/* GPIO bit constants */
+#define GPIO_A_0		(1 <<  0)
+#define GPIO_A_1		(1 <<  1)
+#define GPIO_Y_0		(1 <<  8)
+#define GPIO_Y_1		(1 <<  9)
+#define GPIO_EN_0		(1 << 16)
+#define GPIO_EN_1		(1 << 17)
+#define GPIO_MASK_0		(1 << 24)
+#define GPIO_MASK_1		(1 << 25)
+#define VGA_DDC_DATA_OUTPUT	GPIO_A_0
+#define VGA_DDC_CLK_OUTPUT	GPIO_A_1
+#define VGA_DDC_DATA_INPUT	GPIO_Y_0
+#define VGA_DDC_CLK_INPUT	GPIO_Y_1
+#define VGA_DDC_DATA_OUT_EN	GPIO_EN_0
+#define VGA_DDC_CLK_OUT_EN	GPIO_EN_1
+
+
+/* FP bit constants */
+#define FP_CRTC_H_TOTAL_MASK			   0x000003ff
+#define FP_CRTC_H_DISP_MASK			   0x01ff0000
+#define FP_CRTC_V_TOTAL_MASK			   0x00000fff
+#define FP_CRTC_V_DISP_MASK			   0x0fff0000
+#define FP_H_SYNC_STRT_CHAR_MASK		   0x00001ff8
+#define FP_H_SYNC_WID_MASK			   0x003f0000
+#define FP_V_SYNC_STRT_MASK			   0x00000fff
+#define FP_V_SYNC_WID_MASK			   0x001f0000
+#define FP_CRTC_H_TOTAL_SHIFT			   0x00000000
+#define FP_CRTC_H_DISP_SHIFT			   0x00000010
+#define FP_CRTC_V_TOTAL_SHIFT			   0x00000000
+#define FP_CRTC_V_DISP_SHIFT			   0x00000010
+#define FP_H_SYNC_STRT_CHAR_SHIFT		   0x00000003
+#define FP_H_SYNC_WID_SHIFT			   0x00000010
+#define FP_V_SYNC_STRT_SHIFT			   0x00000000
+#define FP_V_SYNC_WID_SHIFT			   0x00000010
+
+/* FP_GEN_CNTL bit constants */
+#define FP_FPON					   (1 << 0)
+#define FP_TMDS_EN				   (1 << 2)
+#define FP_PANEL_FORMAT                            (1 << 3)
+#define FP_EN_TMDS				   (1 << 7)
+#define FP_DETECT_SENSE				   (1 << 8)
+#define R200_FP_SOURCE_SEL_MASK                    (3 << 10)
+#define R200_FP_SOURCE_SEL_CRTC1                   (0 << 10)
+#define R200_FP_SOURCE_SEL_CRTC2                   (1 << 10)
+#define R200_FP_SOURCE_SEL_RMX                     (2 << 10)
+#define R200_FP_SOURCE_SEL_TRANS                   (3 << 10)
+#define FP_SEL_CRTC1				   (0 << 13)
+#define FP_SEL_CRTC2				   (1 << 13)
+#define FP_USE_VGA_HSYNC                           (1 << 14)
+#define FP_CRTC_DONT_SHADOW_HPAR		   (1 << 15)
+#define FP_CRTC_DONT_SHADOW_VPAR		   (1 << 16)
+#define FP_CRTC_DONT_SHADOW_HEND		   (1 << 17)
+#define FP_CRTC_USE_SHADOW_VEND			   (1 << 18)
+#define FP_RMX_HVSYNC_CONTROL_EN		   (1 << 20)
+#define FP_DFP_SYNC_SEL				   (1 << 21)
+#define FP_CRTC_LOCK_8DOT			   (1 << 22)
+#define FP_CRT_SYNC_SEL				   (1 << 23)
+#define FP_USE_SHADOW_EN			   (1 << 24)
+#define FP_CRT_SYNC_ALT				   (1 << 26)
+
+/* FP2_GEN_CNTL bit constants */
+#define FP2_BLANK_EN             (1 <<  1)
+#define FP2_ON                   (1 <<  2)
+#define FP2_PANEL_FORMAT         (1 <<  3)
+#define FP2_SOURCE_SEL_MASK      (3 << 10)
+#define FP2_SOURCE_SEL_CRTC2     (1 << 10)
+#define FP2_SRC_SEL_MASK         (3 << 13)
+#define FP2_SRC_SEL_CRTC2        (1 << 13)
+#define FP2_FP_POL               (1 << 16)
+#define FP2_LP_POL               (1 << 17)
+#define FP2_SCK_POL              (1 << 18)
+#define FP2_LCD_CNTL_MASK        (7 << 19)
+#define FP2_PAD_FLOP_EN          (1 << 22)
+#define FP2_CRC_EN               (1 << 23)
+#define FP2_CRC_READ_EN          (1 << 24)
+#define FP2_DV0_EN               (1 << 25)
+#define FP2_DV0_RATE_SEL_SDR     (1 << 26)
+
+
+/* LVDS_GEN_CNTL bit constants */
+#define LVDS_ON					   (1 << 0)
+#define LVDS_DISPLAY_DIS			   (1 << 1)
+#define LVDS_PANEL_TYPE				   (1 << 2)
+#define LVDS_PANEL_FORMAT			   (1 << 3)
+#define LVDS_EN					   (1 << 7)
+#define LVDS_BL_MOD_LEVEL_MASK			   0x0000ff00
+#define LVDS_BL_MOD_LEVEL_SHIFT			   8
+#define LVDS_BL_MOD_EN				   (1 << 16)
+#define LVDS_DIGON				   (1 << 18)
+#define LVDS_BLON				   (1 << 19)
+#define LVDS_SEL_CRTC2				   (1 << 23)
+#define LVDS_STATE_MASK	\
+	(LVDS_ON | LVDS_DISPLAY_DIS | LVDS_BL_MOD_LEVEL_MASK | LVDS_BLON)
+
+/* LVDS_PLL_CNTL bit constatns */
+#define HSYNC_DELAY_SHIFT			   0x1c
+#define HSYNC_DELAY_MASK			   (0xf << 0x1c)
+
+/* TMDS_TRANSMITTER_CNTL bit constants */
+#define TMDS_PLL_EN				   (1 << 0)
+#define TMDS_PLLRST				   (1 << 1)
+#define TMDS_RAN_PAT_RST			   (1 << 7)
+#define TMDS_ICHCSEL				   (1 << 28)
+
+/* FP_HORZ_STRETCH bit constants */
+#define HORZ_STRETCH_RATIO_MASK			   0xffff
+#define HORZ_STRETCH_RATIO_MAX			   4096
+#define HORZ_PANEL_SIZE				   (0x1ff << 16)
+#define HORZ_PANEL_SHIFT			   16
+#define HORZ_STRETCH_PIXREP			   (0 << 25)
+#define HORZ_STRETCH_BLEND			   (1 << 26)
+#define HORZ_STRETCH_ENABLE			   (1 << 25)
+#define HORZ_AUTO_RATIO				   (1 << 27)
+#define HORZ_FP_LOOP_STRETCH			   (0x7 << 28)
+#define HORZ_AUTO_RATIO_INC			   (1 << 31)
+
+
+/* FP_VERT_STRETCH bit constants */
+#define VERT_STRETCH_RATIO_MASK			   0xfff
+#define VERT_STRETCH_RATIO_MAX			   4096
+#define VERT_PANEL_SIZE				   (0xfff << 12)
+#define VERT_PANEL_SHIFT			   12
+#define VERT_STRETCH_LINREP			   (0 << 26)
+#define VERT_STRETCH_BLEND			   (1 << 26)
+#define VERT_STRETCH_ENABLE			   (1 << 25)
+#define VERT_AUTO_RATIO_EN			   (1 << 27)
+#define VERT_FP_LOOP_STRETCH			   (0x7 << 28)
+#define VERT_STRETCH_RESERVED			   0xf1000000
+
+/* DAC_CNTL bit constants */
+#define DAC_8BIT_EN                                0x00000100
+#define DAC_4BPP_PIX_ORDER                         0x00000200
+#define DAC_CRC_EN                                 0x00080000
+#define DAC_MASK_ALL				   (0xff << 24)
+#define DAC_PDWN                                   (1 << 15)
+#define DAC_EXPAND_MODE				   (1 << 14)
+#define DAC_VGA_ADR_EN				   (1 << 13)
+#define DAC_RANGE_CNTL				   (3 <<  0)
+#define DAC_RANGE_CNTL_MASK    			   0x03
+#define DAC_BLANKING				   (1 <<  2)
+#define DAC_CMP_EN                                 (1 <<  3)
+#define DAC_CMP_OUTPUT                             (1 <<  7)
+
+/* DAC_CNTL2 bit constants */
+#define DAC2_EXPAND_MODE			   (1 << 14)
+#define DAC2_CMP_EN                                (1 << 7)
+#define DAC2_PALETTE_ACCESS_CNTL                   (1 << 5)
+
+/* DAC_EXT_CNTL bit constants */
+#define DAC_FORCE_BLANK_OFF_EN                     (1 << 4)
+#define DAC_FORCE_DATA_EN                          (1 << 5)
+#define DAC_FORCE_DATA_SEL_MASK                    (3 << 6)
+#define DAC_FORCE_DATA_MASK                        0x0003ff00
+#define DAC_FORCE_DATA_SHIFT                       8
+
+/* GEN_RESET_CNTL bit constants */
+#define SOFT_RESET_GUI                             0x00000001
+#define SOFT_RESET_VCLK                            0x00000100
+#define SOFT_RESET_PCLK                            0x00000200
+#define SOFT_RESET_ECP                             0x00000400
+#define SOFT_RESET_DISPENG_XCLK                    0x00000800
+
+/* MEM_CNTL bit constants */
+#define MEM_CTLR_STATUS_IDLE                       0x00000000
+#define MEM_CTLR_STATUS_BUSY                       0x00100000
+#define MEM_SEQNCR_STATUS_IDLE                     0x00000000
+#define MEM_SEQNCR_STATUS_BUSY                     0x00200000
+#define MEM_ARBITER_STATUS_IDLE                    0x00000000
+#define MEM_ARBITER_STATUS_BUSY                    0x00400000
+#define MEM_REQ_UNLOCK                             0x00000000
+#define MEM_REQ_LOCK                               0x00800000
+#define MEM_NUM_CHANNELS_MASK 			   0x00000001
+#define MEM_USE_B_CH_ONLY                          0x00000002
+#define RV100_MEM_HALF_MODE                        0x00000008
+#define R300_MEM_NUM_CHANNELS_MASK                 0x00000003
+#define R300_MEM_USE_CD_CH_ONLY                    0x00000004
+
+
+/* RBBM_SOFT_RESET bit constants */
+#define SOFT_RESET_CP           		   (1 <<  0)
+#define SOFT_RESET_HI           		   (1 <<  1)
+#define SOFT_RESET_SE           		   (1 <<  2)
+#define SOFT_RESET_RE           		   (1 <<  3)
+#define SOFT_RESET_PP           		   (1 <<  4)
+#define SOFT_RESET_E2           		   (1 <<  5)
+#define SOFT_RESET_RB           		   (1 <<  6)
+#define SOFT_RESET_HDP          		   (1 <<  7)
+
+/* WAIT_UNTIL bit constants */
+#define WAIT_DMA_GUI_IDLE			   (1 << 9)
+#define WAIT_2D_IDLECLEAN			   (1 << 16)
+
+/* SURFACE_CNTL bit consants */
+#define SURF_TRANSLATION_DIS			   (1 << 8)
+#define NONSURF_AP0_SWP_16BPP			   (1 << 20)
+#define NONSURF_AP0_SWP_32BPP			   (1 << 21)
+#define NONSURF_AP1_SWP_16BPP			   (1 << 22)
+#define NONSURF_AP1_SWP_32BPP			   (1 << 23)
+
+/* DEFAULT_SC_BOTTOM_RIGHT bit constants */
+#define DEFAULT_SC_RIGHT_MAX			   (0x1fff << 0)
+#define DEFAULT_SC_BOTTOM_MAX			   (0x1fff << 16)
+
+/* MM_INDEX bit constants */
+#define MM_APER                                    0x80000000
+
+/* CLR_CMP_CNTL bit constants */
+#define COMPARE_SRC_FALSE                          0x00000000
+#define COMPARE_SRC_TRUE                           0x00000001
+#define COMPARE_SRC_NOT_EQUAL                      0x00000004
+#define COMPARE_SRC_EQUAL                          0x00000005
+#define COMPARE_SRC_EQUAL_FLIP                     0x00000007
+#define COMPARE_DST_FALSE                          0x00000000
+#define COMPARE_DST_TRUE                           0x00000100
+#define COMPARE_DST_NOT_EQUAL                      0x00000400
+#define COMPARE_DST_EQUAL                          0x00000500
+#define COMPARE_DESTINATION                        0x00000000
+#define COMPARE_SOURCE                             0x01000000
+#define COMPARE_SRC_AND_DST                        0x02000000
+
+
+/* DP_CNTL bit constants */
+#define DST_X_RIGHT_TO_LEFT                        0x00000000
+#define DST_X_LEFT_TO_RIGHT                        0x00000001
+#define DST_Y_BOTTOM_TO_TOP                        0x00000000
+#define DST_Y_TOP_TO_BOTTOM                        0x00000002
+#define DST_X_MAJOR                                0x00000000
+#define DST_Y_MAJOR                                0x00000004
+#define DST_X_TILE                                 0x00000008
+#define DST_Y_TILE                                 0x00000010
+#define DST_LAST_PEL                               0x00000020
+#define DST_TRAIL_X_RIGHT_TO_LEFT                  0x00000000
+#define DST_TRAIL_X_LEFT_TO_RIGHT                  0x00000040
+#define DST_TRAP_FILL_RIGHT_TO_LEFT                0x00000000
+#define DST_TRAP_FILL_LEFT_TO_RIGHT                0x00000080
+#define DST_BRES_SIGN                              0x00000100
+#define DST_HOST_BIG_ENDIAN_EN                     0x00000200
+#define DST_POLYLINE_NONLAST                       0x00008000
+#define DST_RASTER_STALL                           0x00010000
+#define DST_POLY_EDGE                              0x00040000
+
+
+/* DP_CNTL_YDIR_XDIR_YMAJOR bit constants (short version of DP_CNTL) */
+#define DST_X_MAJOR_S                              0x00000000
+#define DST_Y_MAJOR_S                              0x00000001
+#define DST_Y_BOTTOM_TO_TOP_S                      0x00000000
+#define DST_Y_TOP_TO_BOTTOM_S                      0x00008000
+#define DST_X_RIGHT_TO_LEFT_S                      0x00000000
+#define DST_X_LEFT_TO_RIGHT_S                      0x80000000
+
+
+/* DP_DATATYPE bit constants */
+#define DST_8BPP                                   0x00000002
+#define DST_15BPP                                  0x00000003
+#define DST_16BPP                                  0x00000004
+#define DST_24BPP                                  0x00000005
+#define DST_32BPP                                  0x00000006
+#define DST_8BPP_RGB332                            0x00000007
+#define DST_8BPP_Y8                                0x00000008
+#define DST_8BPP_RGB8                              0x00000009
+#define DST_16BPP_VYUY422                          0x0000000b
+#define DST_16BPP_YVYU422                          0x0000000c
+#define DST_32BPP_AYUV444                          0x0000000e
+#define DST_16BPP_ARGB4444                         0x0000000f
+#define BRUSH_SOLIDCOLOR                           0x00000d00
+#define SRC_MONO                                   0x00000000
+#define SRC_MONO_LBKGD                             0x00010000
+#define SRC_DSTCOLOR                               0x00030000
+#define BYTE_ORDER_MSB_TO_LSB                      0x00000000
+#define BYTE_ORDER_LSB_TO_MSB                      0x40000000
+#define DP_CONVERSION_TEMP                         0x80000000
+#define HOST_BIG_ENDIAN_EN			   (1 << 29)
+
+
+/* DP_GUI_MASTER_CNTL bit constants */
+#define GMC_SRC_PITCH_OFFSET_DEFAULT               0x00000000
+#define GMC_SRC_PITCH_OFFSET_LEAVE                 0x00000001
+#define GMC_DST_PITCH_OFFSET_DEFAULT               0x00000000
+#define GMC_DST_PITCH_OFFSET_LEAVE                 0x00000002
+#define GMC_SRC_CLIP_DEFAULT                       0x00000000
+#define GMC_SRC_CLIP_LEAVE                         0x00000004
+#define GMC_DST_CLIP_DEFAULT                       0x00000000
+#define GMC_DST_CLIP_LEAVE                         0x00000008
+#define GMC_BRUSH_8x8MONO                          0x00000000
+#define GMC_BRUSH_8x8MONO_LBKGD                    0x00000010
+#define GMC_BRUSH_8x1MONO                          0x00000020
+#define GMC_BRUSH_8x1MONO_LBKGD                    0x00000030
+#define GMC_BRUSH_1x8MONO                          0x00000040
+#define GMC_BRUSH_1x8MONO_LBKGD                    0x00000050
+#define GMC_BRUSH_32x1MONO                         0x00000060
+#define GMC_BRUSH_32x1MONO_LBKGD                   0x00000070
+#define GMC_BRUSH_32x32MONO                        0x00000080
+#define GMC_BRUSH_32x32MONO_LBKGD                  0x00000090
+#define GMC_BRUSH_8x8COLOR                         0x000000a0
+#define GMC_BRUSH_8x1COLOR                         0x000000b0
+#define GMC_BRUSH_1x8COLOR                         0x000000c0
+#define GMC_BRUSH_SOLID_COLOR                       0x000000d0
+#define GMC_DST_8BPP                               0x00000200
+#define GMC_DST_15BPP                              0x00000300
+#define GMC_DST_16BPP                              0x00000400
+#define GMC_DST_24BPP                              0x00000500
+#define GMC_DST_32BPP                              0x00000600
+#define GMC_DST_8BPP_RGB332                        0x00000700
+#define GMC_DST_8BPP_Y8                            0x00000800
+#define GMC_DST_8BPP_RGB8                          0x00000900
+#define GMC_DST_16BPP_VYUY422                      0x00000b00
+#define GMC_DST_16BPP_YVYU422                      0x00000c00
+#define GMC_DST_32BPP_AYUV444                      0x00000e00
+#define GMC_DST_16BPP_ARGB4444                     0x00000f00
+#define GMC_SRC_MONO                               0x00000000
+#define GMC_SRC_MONO_LBKGD                         0x00001000
+#define GMC_SRC_DSTCOLOR                           0x00003000
+#define GMC_BYTE_ORDER_MSB_TO_LSB                  0x00000000
+#define GMC_BYTE_ORDER_LSB_TO_MSB                  0x00004000
+#define GMC_DP_CONVERSION_TEMP_9300                0x00008000
+#define GMC_DP_CONVERSION_TEMP_6500                0x00000000
+#define GMC_DP_SRC_RECT                            0x02000000
+#define GMC_DP_SRC_HOST                            0x03000000
+#define GMC_DP_SRC_HOST_BYTEALIGN                  0x04000000
+#define GMC_3D_FCN_EN_CLR                          0x00000000
+#define GMC_3D_FCN_EN_SET                          0x08000000
+#define GMC_DST_CLR_CMP_FCN_LEAVE                  0x00000000
+#define GMC_DST_CLR_CMP_FCN_CLEAR                  0x10000000
+#define GMC_AUX_CLIP_LEAVE                         0x00000000
+#define GMC_AUX_CLIP_CLEAR                         0x20000000
+#define GMC_WRITE_MASK_LEAVE                       0x00000000
+#define GMC_WRITE_MASK_SET                         0x40000000
+#define GMC_CLR_CMP_CNTL_DIS      		   (1 << 28)
+#define GMC_SRC_DATATYPE_COLOR			   (3 << 12)
+#define ROP3_S                			   0x00cc0000
+#define ROP3_SRCCOPY				   0x00cc0000
+#define ROP3_P                			   0x00f00000
+#define ROP3_PATCOPY				   0x00f00000
+#define DP_SRC_SOURCE_MASK        		   (7    << 24)
+#define GMC_BRUSH_NONE            		   (15   <<  4)
+#define DP_SRC_SOURCE_MEMORY			   (2    << 24)
+#define GMC_BRUSH_SOLIDCOLOR			   0x000000d0
+
+/* DP_MIX bit constants */
+#define DP_SRC_RECT                                0x00000200
+#define DP_SRC_HOST                                0x00000300
+#define DP_SRC_HOST_BYTEALIGN                      0x00000400
+
+/* MPLL_CNTL bit constants */
+#define MPLL_RESET                                 0x00000001
+
+/* MDLL_CKO bit constants */
+#define MCKOA_SLEEP                                0x00000001
+#define MCKOA_RESET                                0x00000002
+#define MCKOA_REF_SKEW_MASK                        0x00000700
+#define MCKOA_FB_SKEW_MASK                         0x00007000
+
+/* MDLL_RDCKA bit constants */
+#define MRDCKA0_SLEEP                              0x00000001
+#define MRDCKA0_RESET                              0x00000002
+#define MRDCKA1_SLEEP                              0x00010000
+#define MRDCKA1_RESET                              0x00020000
+
+/* VCLK_ECP_CNTL constants */
+#define VCLK_SRC_SEL_MASK                          0x03
+#define VCLK_SRC_SEL_CPUCLK                        0x00
+#define VCLK_SRC_SEL_PSCANCLK                      0x01
+#define VCLK_SRC_SEL_BYTECLK	                   0x02
+#define VCLK_SRC_SEL_PPLLCLK			   0x03
+#define PIXCLK_ALWAYS_ONb                          0x00000040
+#define PIXCLK_DAC_ALWAYS_ONb                      0x00000080
+
+/* BUS_CNTL1 constants */
+#define BUS_CNTL1_MOBILE_PLATFORM_SEL_MASK         0x0c000000
+#define BUS_CNTL1_MOBILE_PLATFORM_SEL_SHIFT        26
+#define BUS_CNTL1_AGPCLK_VALID                     0x80000000
+
+/* PLL_PWRMGT_CNTL constants */
+#define PLL_PWRMGT_CNTL_SPLL_TURNOFF               0x00000002
+#define PLL_PWRMGT_CNTL_PPLL_TURNOFF               0x00000004
+#define PLL_PWRMGT_CNTL_P2PLL_TURNOFF              0x00000008
+#define PLL_PWRMGT_CNTL_TVPLL_TURNOFF              0x00000010
+#define PLL_PWRMGT_CNTL_MOBILE_SU                  0x00010000
+#define PLL_PWRMGT_CNTL_SU_SCLK_USE_BCLK           0x00020000
+#define PLL_PWRMGT_CNTL_SU_MCLK_USE_BCLK           0x00040000
+
+/* TV_DAC_CNTL constants */
+#define TV_DAC_CNTL_BGSLEEP                        0x00000040
+#define TV_DAC_CNTL_DETECT                         0x00000010
+#define TV_DAC_CNTL_BGADJ_MASK                     0x000f0000
+#define TV_DAC_CNTL_DACADJ_MASK                    0x00f00000
+#define TV_DAC_CNTL_BGADJ__SHIFT                   16
+#define TV_DAC_CNTL_DACADJ__SHIFT                  20
+#define TV_DAC_CNTL_RDACPD                         0x01000000
+#define TV_DAC_CNTL_GDACPD                         0x02000000
+#define TV_DAC_CNTL_BDACPD                         0x04000000
+
+/* DISP_MISC_CNTL constants */
+#define DISP_MISC_CNTL_SOFT_RESET_GRPH_PP          (1 << 0)
+#define DISP_MISC_CNTL_SOFT_RESET_SUBPIC_PP        (1 << 1)
+#define DISP_MISC_CNTL_SOFT_RESET_OV0_PP           (1 << 2)
+#define DISP_MISC_CNTL_SOFT_RESET_GRPH_SCLK        (1 << 4)
+#define DISP_MISC_CNTL_SOFT_RESET_SUBPIC_SCLK      (1 << 5)
+#define DISP_MISC_CNTL_SOFT_RESET_OV0_SCLK         (1 << 6)
+#define DISP_MISC_CNTL_SOFT_RESET_GRPH2_PP         (1 << 12)
+#define DISP_MISC_CNTL_SOFT_RESET_GRPH2_SCLK       (1 << 15)
+#define DISP_MISC_CNTL_SOFT_RESET_LVDS             (1 << 16)
+#define DISP_MISC_CNTL_SOFT_RESET_TMDS             (1 << 17)
+#define DISP_MISC_CNTL_SOFT_RESET_DIG_TMDS         (1 << 18)
+#define DISP_MISC_CNTL_SOFT_RESET_TV               (1 << 19)
+
+/* DISP_PWR_MAN constants */
+#define DISP_PWR_MAN_DISP_PWR_MAN_D3_CRTC_EN       (1 << 0)
+#define DISP_PWR_MAN_DISP2_PWR_MAN_D3_CRTC2_EN     (1 << 4)
+#define DISP_PWR_MAN_DISP_D3_RST                   (1 << 16)
+#define DISP_PWR_MAN_DISP_D3_REG_RST               (1 << 17)
+#define DISP_PWR_MAN_DISP_D3_GRPH_RST              (1 << 18)
+#define DISP_PWR_MAN_DISP_D3_SUBPIC_RST            (1 << 19)
+#define DISP_PWR_MAN_DISP_D3_OV0_RST               (1 << 20)
+#define DISP_PWR_MAN_DISP_D1D2_GRPH_RST            (1 << 21)
+#define DISP_PWR_MAN_DISP_D1D2_SUBPIC_RST          (1 << 22)
+#define DISP_PWR_MAN_DISP_D1D2_OV0_RST             (1 << 23)
+#define DISP_PWR_MAN_DIG_TMDS_ENABLE_RST           (1 << 24)
+#define DISP_PWR_MAN_TV_ENABLE_RST                 (1 << 25)
+#define DISP_PWR_MAN_AUTO_PWRUP_EN                 (1 << 26)
+
+/* masks */
+
+#define CNFG_MEMSIZE_MASK		0x1f000000
+#define MEM_CFG_TYPE			0x40000000
+#define DST_OFFSET_MASK			0x003fffff
+#define DST_PITCH_MASK			0x3fc00000
+#define DEFAULT_TILE_MASK		0xc0000000
+#define	PPLL_DIV_SEL_MASK		0x00000300
+#define	PPLL_RESET			0x00000001
+#define	PPLL_SLEEP			0x00000002
+#define PPLL_ATOMIC_UPDATE_EN		0x00010000
+#define PPLL_REF_DIV_MASK		0x000003ff
+#define	PPLL_FB3_DIV_MASK		0x000007ff
+#define	PPLL_POST3_DIV_MASK		0x00070000
+#define PPLL_ATOMIC_UPDATE_R		0x00008000
+#define PPLL_ATOMIC_UPDATE_W		0x00008000
+#define	PPLL_VGA_ATOMIC_UPDATE_EN	0x00020000
+#define R300_PPLL_REF_DIV_ACC_MASK	(0x3ff << 18)
+#define R300_PPLL_REF_DIV_ACC_SHIFT	18
+
+#define GUI_ACTIVE			0x80000000
+
+
+#define MC_IND_INDEX                           0x01F8
+#define MC_IND_DATA                            0x01FC
+
+/* PAD_CTLR_STRENGTH */
+#define PAD_MANUAL_OVERRIDE		0x80000000
+
+// pllCLK_PIN_CNTL
+#define CLK_PIN_CNTL__OSC_EN_MASK                          0x00000001L
+#define CLK_PIN_CNTL__OSC_EN                               0x00000001L
+#define CLK_PIN_CNTL__XTL_LOW_GAIN_MASK                    0x00000004L
+#define CLK_PIN_CNTL__XTL_LOW_GAIN                         0x00000004L
+#define CLK_PIN_CNTL__DONT_USE_XTALIN_MASK                 0x00000010L
+#define CLK_PIN_CNTL__DONT_USE_XTALIN                      0x00000010L
+#define CLK_PIN_CNTL__SLOW_CLOCK_SOURCE_MASK               0x00000020L
+#define CLK_PIN_CNTL__SLOW_CLOCK_SOURCE                    0x00000020L
+#define CLK_PIN_CNTL__CG_CLK_TO_OUTPIN_MASK                0x00000800L
+#define CLK_PIN_CNTL__CG_CLK_TO_OUTPIN                     0x00000800L
+#define CLK_PIN_CNTL__CG_COUNT_UP_TO_OUTPIN_MASK           0x00001000L
+#define CLK_PIN_CNTL__CG_COUNT_UP_TO_OUTPIN                0x00001000L
+#define CLK_PIN_CNTL__ACCESS_REGS_IN_SUSPEND_MASK          0x00002000L
+#define CLK_PIN_CNTL__ACCESS_REGS_IN_SUSPEND               0x00002000L
+#define CLK_PIN_CNTL__CG_SPARE_MASK                        0x00004000L
+#define CLK_PIN_CNTL__CG_SPARE                             0x00004000L
+#define CLK_PIN_CNTL__SCLK_DYN_START_CNTL_MASK             0x00008000L
+#define CLK_PIN_CNTL__SCLK_DYN_START_CNTL                  0x00008000L
+#define CLK_PIN_CNTL__CP_CLK_RUNNING_MASK                  0x00010000L
+#define CLK_PIN_CNTL__CP_CLK_RUNNING                       0x00010000L
+#define CLK_PIN_CNTL__CG_SPARE_RD_MASK                     0x00060000L
+#define CLK_PIN_CNTL__XTALIN_ALWAYS_ONb_MASK               0x00080000L
+#define CLK_PIN_CNTL__XTALIN_ALWAYS_ONb                    0x00080000L
+#define CLK_PIN_CNTL__PWRSEQ_DELAY_MASK                    0xff000000L
+
+// pllCLK_PWRMGT_CNTL
+#define	CLK_PWRMGT_CNTL__MPLL_PWRMGT_OFF__SHIFT         0x00000000
+#define	CLK_PWRMGT_CNTL__SPLL_PWRMGT_OFF__SHIFT         0x00000001
+#define	CLK_PWRMGT_CNTL__PPLL_PWRMGT_OFF__SHIFT         0x00000002
+#define	CLK_PWRMGT_CNTL__P2PLL_PWRMGT_OFF__SHIFT        0x00000003
+#define	CLK_PWRMGT_CNTL__MCLK_TURNOFF__SHIFT            0x00000004
+#define	CLK_PWRMGT_CNTL__SCLK_TURNOFF__SHIFT            0x00000005
+#define	CLK_PWRMGT_CNTL__PCLK_TURNOFF__SHIFT            0x00000006
+#define	CLK_PWRMGT_CNTL__P2CLK_TURNOFF__SHIFT           0x00000007
+#define	CLK_PWRMGT_CNTL__MC_CH_MODE__SHIFT              0x00000008
+#define	CLK_PWRMGT_CNTL__TEST_MODE__SHIFT               0x00000009
+#define	CLK_PWRMGT_CNTL__GLOBAL_PMAN_EN__SHIFT          0x0000000a
+#define	CLK_PWRMGT_CNTL__ENGINE_DYNCLK_MODE__SHIFT      0x0000000c
+#define	CLK_PWRMGT_CNTL__ACTIVE_HILO_LAT__SHIFT         0x0000000d
+#define	CLK_PWRMGT_CNTL__DISP_DYN_STOP_LAT__SHIFT       0x0000000f
+#define	CLK_PWRMGT_CNTL__MC_BUSY__SHIFT                 0x00000010
+#define	CLK_PWRMGT_CNTL__MC_INT_CNTL__SHIFT             0x00000011
+#define	CLK_PWRMGT_CNTL__MC_SWITCH__SHIFT               0x00000012
+#define	CLK_PWRMGT_CNTL__DLL_READY__SHIFT               0x00000013
+#define	CLK_PWRMGT_CNTL__DISP_PM__SHIFT                 0x00000014
+#define	CLK_PWRMGT_CNTL__DYN_STOP_MODE__SHIFT           0x00000015
+#define	CLK_PWRMGT_CNTL__CG_NO1_DEBUG__SHIFT            0x00000018
+#define	CLK_PWRMGT_CNTL__TVPLL_PWRMGT_OFF__SHIFT        0x0000001e
+#define	CLK_PWRMGT_CNTL__TVCLK_TURNOFF__SHIFT           0x0000001f
+
+// pllP2PLL_CNTL
+#define P2PLL_CNTL__P2PLL_RESET_MASK                       0x00000001L
+#define P2PLL_CNTL__P2PLL_RESET                            0x00000001L
+#define P2PLL_CNTL__P2PLL_SLEEP_MASK                       0x00000002L
+#define P2PLL_CNTL__P2PLL_SLEEP                            0x00000002L
+#define P2PLL_CNTL__P2PLL_TST_EN_MASK                      0x00000004L
+#define P2PLL_CNTL__P2PLL_TST_EN                           0x00000004L
+#define P2PLL_CNTL__P2PLL_REFCLK_SEL_MASK                  0x00000010L
+#define P2PLL_CNTL__P2PLL_REFCLK_SEL                       0x00000010L
+#define P2PLL_CNTL__P2PLL_FBCLK_SEL_MASK                   0x00000020L
+#define P2PLL_CNTL__P2PLL_FBCLK_SEL                        0x00000020L
+#define P2PLL_CNTL__P2PLL_TCPOFF_MASK                      0x00000040L
+#define P2PLL_CNTL__P2PLL_TCPOFF                           0x00000040L
+#define P2PLL_CNTL__P2PLL_TVCOMAX_MASK                     0x00000080L
+#define P2PLL_CNTL__P2PLL_TVCOMAX                          0x00000080L
+#define P2PLL_CNTL__P2PLL_PCP_MASK                         0x00000700L
+#define P2PLL_CNTL__P2PLL_PVG_MASK                         0x00003800L
+#define P2PLL_CNTL__P2PLL_PDC_MASK                         0x0000c000L
+#define P2PLL_CNTL__P2PLL_ATOMIC_UPDATE_EN_MASK            0x00010000L
+#define P2PLL_CNTL__P2PLL_ATOMIC_UPDATE_EN                 0x00010000L
+#define P2PLL_CNTL__P2PLL_ATOMIC_UPDATE_SYNC_MASK          0x00040000L
+#define P2PLL_CNTL__P2PLL_ATOMIC_UPDATE_SYNC               0x00040000L
+#define P2PLL_CNTL__P2PLL_DISABLE_AUTO_RESET_MASK          0x00080000L
+#define P2PLL_CNTL__P2PLL_DISABLE_AUTO_RESET               0x00080000L
+
+// pllPIXCLKS_CNTL
+#define	PIXCLKS_CNTL__PIX2CLK_SRC_SEL__SHIFT               0x00000000
+#define	PIXCLKS_CNTL__PIX2CLK_INVERT__SHIFT                0x00000004
+#define	PIXCLKS_CNTL__PIX2CLK_SRC_INVERT__SHIFT            0x00000005
+#define	PIXCLKS_CNTL__PIX2CLK_ALWAYS_ONb__SHIFT            0x00000006
+#define	PIXCLKS_CNTL__PIX2CLK_DAC_ALWAYS_ONb__SHIFT        0x00000007
+#define	PIXCLKS_CNTL__PIXCLK_TV_SRC_SEL__SHIFT             0x00000008
+#define	PIXCLKS_CNTL__PIXCLK_BLEND_ALWAYS_ONb__SHIFT       0x0000000b
+#define	PIXCLKS_CNTL__PIXCLK_GV_ALWAYS_ONb__SHIFT          0x0000000c
+#define	PIXCLKS_CNTL__PIXCLK_DIG_TMDS_ALWAYS_ONb__SHIFT    0x0000000d
+#define	PIXCLKS_CNTL__PIXCLK_LVDS_ALWAYS_ONb__SHIFT        0x0000000e
+#define	PIXCLKS_CNTL__PIXCLK_TMDS_ALWAYS_ONb__SHIFT        0x0000000f
+
+
+// pllPIXCLKS_CNTL
+#define PIXCLKS_CNTL__PIX2CLK_SRC_SEL_MASK                 0x00000003L
+#define PIXCLKS_CNTL__PIX2CLK_INVERT                       0x00000010L
+#define PIXCLKS_CNTL__PIX2CLK_SRC_INVERT                   0x00000020L
+#define PIXCLKS_CNTL__PIX2CLK_ALWAYS_ONb                   0x00000040L
+#define PIXCLKS_CNTL__PIX2CLK_DAC_ALWAYS_ONb               0x00000080L
+#define PIXCLKS_CNTL__PIXCLK_TV_SRC_SEL                    0x00000100L
+#define PIXCLKS_CNTL__PIXCLK_BLEND_ALWAYS_ONb              0x00000800L
+#define PIXCLKS_CNTL__PIXCLK_GV_ALWAYS_ONb                 0x00001000L
+#define PIXCLKS_CNTL__PIXCLK_DIG_TMDS_ALWAYS_ONb           0x00002000L
+#define PIXCLKS_CNTL__PIXCLK_LVDS_ALWAYS_ONb               0x00004000L
+#define PIXCLKS_CNTL__PIXCLK_TMDS_ALWAYS_ONb               0x00008000L
+#define PIXCLKS_CNTL__DISP_TVOUT_PIXCLK_TV_ALWAYS_ONb      (1 << 9)
+#define PIXCLKS_CNTL__R300_DVOCLK_ALWAYS_ONb               (1 << 10)
+#define PIXCLKS_CNTL__R300_PIXCLK_DVO_ALWAYS_ONb           (1 << 13)
+#define PIXCLKS_CNTL__R300_PIXCLK_TRANS_ALWAYS_ONb         (1 << 16)
+#define PIXCLKS_CNTL__R300_PIXCLK_TVO_ALWAYS_ONb           (1 << 17)
+#define PIXCLKS_CNTL__R300_P2G2CLK_ALWAYS_ONb              (1 << 18)
+#define PIXCLKS_CNTL__R300_P2G2CLK_DAC_ALWAYS_ONb          (1 << 19)
+#define PIXCLKS_CNTL__R300_DISP_DAC_PIXCLK_DAC2_BLANK_OFF  (1 << 23)
+
+
+// pllP2PLL_DIV_0
+#define P2PLL_DIV_0__P2PLL_FB_DIV_MASK                     0x000007ffL
+#define P2PLL_DIV_0__P2PLL_ATOMIC_UPDATE_W_MASK            0x00008000L
+#define P2PLL_DIV_0__P2PLL_ATOMIC_UPDATE_W                 0x00008000L
+#define P2PLL_DIV_0__P2PLL_ATOMIC_UPDATE_R_MASK            0x00008000L
+#define P2PLL_DIV_0__P2PLL_ATOMIC_UPDATE_R                 0x00008000L
+#define P2PLL_DIV_0__P2PLL_POST_DIV_MASK                   0x00070000L
+
+// pllSCLK_CNTL
+#define SCLK_CNTL__SCLK_SRC_SEL_MASK                    0x00000007L
+#define SCLK_CNTL__CP_MAX_DYN_STOP_LAT                  0x00000008L
+#define SCLK_CNTL__HDP_MAX_DYN_STOP_LAT                 0x00000010L
+#define SCLK_CNTL__TV_MAX_DYN_STOP_LAT                  0x00000020L
+#define SCLK_CNTL__E2_MAX_DYN_STOP_LAT                  0x00000040L
+#define SCLK_CNTL__SE_MAX_DYN_STOP_LAT                  0x00000080L
+#define SCLK_CNTL__IDCT_MAX_DYN_STOP_LAT                0x00000100L
+#define SCLK_CNTL__VIP_MAX_DYN_STOP_LAT                 0x00000200L
+#define SCLK_CNTL__RE_MAX_DYN_STOP_LAT                  0x00000400L
+#define SCLK_CNTL__PB_MAX_DYN_STOP_LAT                  0x00000800L
+#define SCLK_CNTL__TAM_MAX_DYN_STOP_LAT                 0x00001000L
+#define SCLK_CNTL__TDM_MAX_DYN_STOP_LAT                 0x00002000L
+#define SCLK_CNTL__RB_MAX_DYN_STOP_LAT                  0x00004000L
+#define SCLK_CNTL__DYN_STOP_LAT_MASK                     0x00007ff8
+#define SCLK_CNTL__FORCE_DISP2                          0x00008000L
+#define SCLK_CNTL__FORCE_CP                             0x00010000L
+#define SCLK_CNTL__FORCE_HDP                            0x00020000L
+#define SCLK_CNTL__FORCE_DISP1                          0x00040000L
+#define SCLK_CNTL__FORCE_TOP                            0x00080000L
+#define SCLK_CNTL__FORCE_E2                             0x00100000L
+#define SCLK_CNTL__FORCE_SE                             0x00200000L
+#define SCLK_CNTL__FORCE_IDCT                           0x00400000L
+#define SCLK_CNTL__FORCE_VIP                            0x00800000L
+#define SCLK_CNTL__FORCE_RE                             0x01000000L
+#define SCLK_CNTL__FORCE_PB                             0x02000000L
+#define SCLK_CNTL__FORCE_TAM                            0x04000000L
+#define SCLK_CNTL__FORCE_TDM                            0x08000000L
+#define SCLK_CNTL__FORCE_RB                             0x10000000L
+#define SCLK_CNTL__FORCE_TV_SCLK                        0x20000000L
+#define SCLK_CNTL__FORCE_SUBPIC                         0x40000000L
+#define SCLK_CNTL__FORCE_OV0                            0x80000000L
+#define SCLK_CNTL__R300_FORCE_VAP                       (1<<21)
+#define SCLK_CNTL__R300_FORCE_SR                        (1<<25)
+#define SCLK_CNTL__R300_FORCE_PX                        (1<<26)
+#define SCLK_CNTL__R300_FORCE_TX                        (1<<27)
+#define SCLK_CNTL__R300_FORCE_US                        (1<<28)
+#define SCLK_CNTL__R300_FORCE_SU                        (1<<30)
+#define SCLK_CNTL__FORCEON_MASK                         0xffff8000L
+
+// pllSCLK_CNTL2
+#define SCLK_CNTL2__R300_TCL_MAX_DYN_STOP_LAT           (1<<10)
+#define SCLK_CNTL2__R300_GA_MAX_DYN_STOP_LAT            (1<<11)
+#define SCLK_CNTL2__R300_CBA_MAX_DYN_STOP_LAT           (1<<12)
+#define SCLK_CNTL2__R300_FORCE_TCL                      (1<<13)
+#define SCLK_CNTL2__R300_FORCE_CBA                      (1<<14)
+#define SCLK_CNTL2__R300_FORCE_GA                       (1<<15)
+
+// SCLK_MORE_CNTL
+#define SCLK_MORE_CNTL__DISPREGS_MAX_DYN_STOP_LAT          0x00000001L
+#define SCLK_MORE_CNTL__MC_GUI_MAX_DYN_STOP_LAT            0x00000002L
+#define SCLK_MORE_CNTL__MC_HOST_MAX_DYN_STOP_LAT           0x00000004L
+#define SCLK_MORE_CNTL__FORCE_DISPREGS                     0x00000100L
+#define SCLK_MORE_CNTL__FORCE_MC_GUI                       0x00000200L
+#define SCLK_MORE_CNTL__FORCE_MC_HOST                      0x00000400L
+#define SCLK_MORE_CNTL__STOP_SCLK_EN                       0x00001000L
+#define SCLK_MORE_CNTL__STOP_SCLK_A                        0x00002000L
+#define SCLK_MORE_CNTL__STOP_SCLK_B                        0x00004000L
+#define SCLK_MORE_CNTL__STOP_SCLK_C                        0x00008000L
+#define SCLK_MORE_CNTL__HALF_SPEED_SCLK                    0x00010000L
+#define SCLK_MORE_CNTL__IO_CG_VOLTAGE_DROP                 0x00020000L
+#define SCLK_MORE_CNTL__TVFB_SOFT_RESET                    0x00040000L
+#define SCLK_MORE_CNTL__VOLTAGE_DROP_SYNC                  0x00080000L
+#define SCLK_MORE_CNTL__IDLE_DELAY_HALF_SCLK               0x00400000L
+#define SCLK_MORE_CNTL__AGP_BUSY_HALF_SCLK                 0x00800000L
+#define SCLK_MORE_CNTL__CG_SPARE_RD_C_MASK                 0xff000000L
+#define SCLK_MORE_CNTL__FORCEON                            0x00000700L
+
+// MCLK_CNTL
+#define MCLK_CNTL__MCLKA_SRC_SEL_MASK                   0x00000007L
+#define MCLK_CNTL__YCLKA_SRC_SEL_MASK                   0x00000070L
+#define MCLK_CNTL__MCLKB_SRC_SEL_MASK                   0x00000700L
+#define MCLK_CNTL__YCLKB_SRC_SEL_MASK                   0x00007000L
+#define MCLK_CNTL__FORCE_MCLKA_MASK                     0x00010000L
+#define MCLK_CNTL__FORCE_MCLKA                          0x00010000L
+#define MCLK_CNTL__FORCE_MCLKB_MASK                     0x00020000L
+#define MCLK_CNTL__FORCE_MCLKB                          0x00020000L
+#define MCLK_CNTL__FORCE_YCLKA_MASK                     0x00040000L
+#define MCLK_CNTL__FORCE_YCLKA                          0x00040000L
+#define MCLK_CNTL__FORCE_YCLKB_MASK                     0x00080000L
+#define MCLK_CNTL__FORCE_YCLKB                          0x00080000L
+#define MCLK_CNTL__FORCE_MC_MASK                        0x00100000L
+#define MCLK_CNTL__FORCE_MC                             0x00100000L
+#define MCLK_CNTL__FORCE_AIC_MASK                       0x00200000L
+#define MCLK_CNTL__FORCE_AIC                            0x00200000L
+#define MCLK_CNTL__MRDCKA0_SOUTSEL_MASK                 0x03000000L
+#define MCLK_CNTL__MRDCKA1_SOUTSEL_MASK                 0x0c000000L
+#define MCLK_CNTL__MRDCKB0_SOUTSEL_MASK                 0x30000000L
+#define MCLK_CNTL__MRDCKB1_SOUTSEL_MASK                 0xc0000000L
+#define MCLK_CNTL__R300_DISABLE_MC_MCLKA                (1 << 21)
+#define MCLK_CNTL__R300_DISABLE_MC_MCLKB                (1 << 21)
+
+// MCLK_MISC
+#define MCLK_MISC__SCLK_SOURCED_FROM_MPLL_SEL_MASK         0x00000003L
+#define MCLK_MISC__MCLK_FROM_SPLL_DIV_SEL_MASK             0x00000004L
+#define MCLK_MISC__MCLK_FROM_SPLL_DIV_SEL                  0x00000004L
+#define MCLK_MISC__ENABLE_SCLK_FROM_MPLL_MASK              0x00000008L
+#define MCLK_MISC__ENABLE_SCLK_FROM_MPLL                   0x00000008L
+#define MCLK_MISC__MPLL_MODEA_MODEC_HW_SEL_EN_MASK         0x00000010L
+#define MCLK_MISC__MPLL_MODEA_MODEC_HW_SEL_EN              0x00000010L
+#define MCLK_MISC__DLL_READY_LAT_MASK                      0x00000100L
+#define MCLK_MISC__DLL_READY_LAT                           0x00000100L
+#define MCLK_MISC__MC_MCLK_MAX_DYN_STOP_LAT_MASK           0x00001000L
+#define MCLK_MISC__MC_MCLK_MAX_DYN_STOP_LAT                0x00001000L
+#define MCLK_MISC__IO_MCLK_MAX_DYN_STOP_LAT_MASK           0x00002000L
+#define MCLK_MISC__IO_MCLK_MAX_DYN_STOP_LAT                0x00002000L
+#define MCLK_MISC__MC_MCLK_DYN_ENABLE_MASK                 0x00004000L
+#define MCLK_MISC__MC_MCLK_DYN_ENABLE                      0x00004000L
+#define MCLK_MISC__IO_MCLK_DYN_ENABLE_MASK                 0x00008000L
+#define MCLK_MISC__IO_MCLK_DYN_ENABLE                      0x00008000L
+#define MCLK_MISC__CGM_CLK_TO_OUTPIN_MASK                  0x00010000L
+#define MCLK_MISC__CGM_CLK_TO_OUTPIN                       0x00010000L
+#define MCLK_MISC__CLK_OR_COUNT_SEL_MASK                   0x00020000L
+#define MCLK_MISC__CLK_OR_COUNT_SEL                        0x00020000L
+#define MCLK_MISC__EN_MCLK_TRISTATE_IN_SUSPEND_MASK        0x00040000L
+#define MCLK_MISC__EN_MCLK_TRISTATE_IN_SUSPEND             0x00040000L
+#define MCLK_MISC__CGM_SPARE_RD_MASK                       0x00300000L
+#define MCLK_MISC__CGM_SPARE_A_RD_MASK                     0x00c00000L
+#define MCLK_MISC__TCLK_TO_YCLKB_EN_MASK                   0x01000000L
+#define MCLK_MISC__TCLK_TO_YCLKB_EN                        0x01000000L
+#define MCLK_MISC__CGM_SPARE_A_MASK                        0x0e000000L
+
+// VCLK_ECP_CNTL
+#define VCLK_ECP_CNTL__VCLK_SRC_SEL_MASK                   0x00000003L
+#define VCLK_ECP_CNTL__VCLK_INVERT                         0x00000010L
+#define VCLK_ECP_CNTL__PIXCLK_SRC_INVERT                   0x00000020L
+#define VCLK_ECP_CNTL__PIXCLK_ALWAYS_ONb                   0x00000040L
+#define VCLK_ECP_CNTL__PIXCLK_DAC_ALWAYS_ONb               0x00000080L
+#define VCLK_ECP_CNTL__ECP_DIV_MASK                        0x00000300L
+#define VCLK_ECP_CNTL__ECP_FORCE_ON                        0x00040000L
+#define VCLK_ECP_CNTL__SUBCLK_FORCE_ON                     0x00080000L
+#define VCLK_ECP_CNTL__R300_DISP_DAC_PIXCLK_DAC_BLANK_OFF  (1<<23)
+
+// PLL_PWRMGT_CNTL
+#define PLL_PWRMGT_CNTL__MPLL_TURNOFF_MASK                 0x00000001L
+#define PLL_PWRMGT_CNTL__MPLL_TURNOFF                      0x00000001L
+#define PLL_PWRMGT_CNTL__SPLL_TURNOFF_MASK                 0x00000002L
+#define PLL_PWRMGT_CNTL__SPLL_TURNOFF                      0x00000002L
+#define PLL_PWRMGT_CNTL__PPLL_TURNOFF_MASK                 0x00000004L
+#define PLL_PWRMGT_CNTL__PPLL_TURNOFF                      0x00000004L
+#define PLL_PWRMGT_CNTL__P2PLL_TURNOFF_MASK                0x00000008L
+#define PLL_PWRMGT_CNTL__P2PLL_TURNOFF                     0x00000008L
+#define PLL_PWRMGT_CNTL__TVPLL_TURNOFF_MASK                0x00000010L
+#define PLL_PWRMGT_CNTL__TVPLL_TURNOFF                     0x00000010L
+#define PLL_PWRMGT_CNTL__AGPCLK_DYN_STOP_LAT_MASK          0x000001e0L
+#define PLL_PWRMGT_CNTL__APM_POWER_STATE_MASK              0x00000600L
+#define PLL_PWRMGT_CNTL__APM_PWRSTATE_RD_MASK              0x00001800L
+#define PLL_PWRMGT_CNTL__PM_MODE_SEL_MASK                  0x00002000L
+#define PLL_PWRMGT_CNTL__PM_MODE_SEL                       0x00002000L
+#define PLL_PWRMGT_CNTL__EN_PWRSEQ_DONE_COND_MASK          0x00004000L
+#define PLL_PWRMGT_CNTL__EN_PWRSEQ_DONE_COND               0x00004000L
+#define PLL_PWRMGT_CNTL__EN_DISP_PARKED_COND_MASK          0x00008000L
+#define PLL_PWRMGT_CNTL__EN_DISP_PARKED_COND               0x00008000L
+#define PLL_PWRMGT_CNTL__MOBILE_SU_MASK                    0x00010000L
+#define PLL_PWRMGT_CNTL__MOBILE_SU                         0x00010000L
+#define PLL_PWRMGT_CNTL__SU_SCLK_USE_BCLK_MASK             0x00020000L
+#define PLL_PWRMGT_CNTL__SU_SCLK_USE_BCLK                  0x00020000L
+#define PLL_PWRMGT_CNTL__SU_MCLK_USE_BCLK_MASK             0x00040000L
+#define PLL_PWRMGT_CNTL__SU_MCLK_USE_BCLK                  0x00040000L
+#define PLL_PWRMGT_CNTL__SU_SUSTAIN_DISABLE_MASK           0x00080000L
+#define PLL_PWRMGT_CNTL__SU_SUSTAIN_DISABLE                0x00080000L
+#define PLL_PWRMGT_CNTL__TCL_BYPASS_DISABLE_MASK           0x00100000L
+#define PLL_PWRMGT_CNTL__TCL_BYPASS_DISABLE                0x00100000L
+#define PLL_PWRMGT_CNTL__TCL_CLOCK_CTIVE_RD_MASK          0x00200000L
+#define PLL_PWRMGT_CNTL__TCL_CLOCK_ACTIVE_RD               0x00200000L
+#define PLL_PWRMGT_CNTL__CG_NO2_DEBUG_MASK                 0xff000000L
+
+// CLK_PWRMGT_CNTL
+#define CLK_PWRMGT_CNTL__MPLL_PWRMGT_OFF_MASK           0x00000001L
+#define CLK_PWRMGT_CNTL__MPLL_PWRMGT_OFF                0x00000001L
+#define CLK_PWRMGT_CNTL__SPLL_PWRMGT_OFF_MASK           0x00000002L
+#define CLK_PWRMGT_CNTL__SPLL_PWRMGT_OFF                0x00000002L
+#define CLK_PWRMGT_CNTL__PPLL_PWRMGT_OFF_MASK           0x00000004L
+#define CLK_PWRMGT_CNTL__PPLL_PWRMGT_OFF                0x00000004L
+#define CLK_PWRMGT_CNTL__P2PLL_PWRMGT_OFF_MASK          0x00000008L
+#define CLK_PWRMGT_CNTL__P2PLL_PWRMGT_OFF               0x00000008L
+#define CLK_PWRMGT_CNTL__MCLK_TURNOFF_MASK              0x00000010L
+#define CLK_PWRMGT_CNTL__MCLK_TURNOFF                   0x00000010L
+#define CLK_PWRMGT_CNTL__SCLK_TURNOFF_MASK              0x00000020L
+#define CLK_PWRMGT_CNTL__SCLK_TURNOFF                   0x00000020L
+#define CLK_PWRMGT_CNTL__PCLK_TURNOFF_MASK              0x00000040L
+#define CLK_PWRMGT_CNTL__PCLK_TURNOFF                   0x00000040L
+#define CLK_PWRMGT_CNTL__P2CLK_TURNOFF_MASK             0x00000080L
+#define CLK_PWRMGT_CNTL__P2CLK_TURNOFF                  0x00000080L
+#define CLK_PWRMGT_CNTL__MC_CH_MODE_MASK                0x00000100L
+#define CLK_PWRMGT_CNTL__MC_CH_MODE                     0x00000100L
+#define CLK_PWRMGT_CNTL__TEST_MODE_MASK                 0x00000200L
+#define CLK_PWRMGT_CNTL__TEST_MODE                      0x00000200L
+#define CLK_PWRMGT_CNTL__GLOBAL_PMAN_EN_MASK            0x00000400L
+#define CLK_PWRMGT_CNTL__GLOBAL_PMAN_EN                 0x00000400L
+#define CLK_PWRMGT_CNTL__ENGINE_DYNCLK_MODE_MASK        0x00001000L
+#define CLK_PWRMGT_CNTL__ENGINE_DYNCLK_MODE             0x00001000L
+#define CLK_PWRMGT_CNTL__ACTIVE_HILO_LAT_MASK           0x00006000L
+#define CLK_PWRMGT_CNTL__DISP_DYN_STOP_LAT_MASK         0x00008000L
+#define CLK_PWRMGT_CNTL__DISP_DYN_STOP_LAT              0x00008000L
+#define CLK_PWRMGT_CNTL__MC_BUSY_MASK                   0x00010000L
+#define CLK_PWRMGT_CNTL__MC_BUSY                        0x00010000L
+#define CLK_PWRMGT_CNTL__MC_INT_CNTL_MASK               0x00020000L
+#define CLK_PWRMGT_CNTL__MC_INT_CNTL                    0x00020000L
+#define CLK_PWRMGT_CNTL__MC_SWITCH_MASK                 0x00040000L
+#define CLK_PWRMGT_CNTL__MC_SWITCH                      0x00040000L
+#define CLK_PWRMGT_CNTL__DLL_READY_MASK                 0x00080000L
+#define CLK_PWRMGT_CNTL__DLL_READY                      0x00080000L
+#define CLK_PWRMGT_CNTL__DISP_PM_MASK                   0x00100000L
+#define CLK_PWRMGT_CNTL__DISP_PM                        0x00100000L
+#define CLK_PWRMGT_CNTL__DYN_STOP_MODE_MASK             0x00e00000L
+#define CLK_PWRMGT_CNTL__CG_NO1_DEBUG_MASK              0x3f000000L
+#define CLK_PWRMGT_CNTL__TVPLL_PWRMGT_OFF_MASK          0x40000000L
+#define CLK_PWRMGT_CNTL__TVPLL_PWRMGT_OFF               0x40000000L
+#define CLK_PWRMGT_CNTL__TVCLK_TURNOFF_MASK             0x80000000L
+#define CLK_PWRMGT_CNTL__TVCLK_TURNOFF                  0x80000000L
+
+// BUS_CNTL1
+#define BUS_CNTL1__PMI_IO_DISABLE_MASK                     0x00000001L
+#define BUS_CNTL1__PMI_IO_DISABLE                          0x00000001L
+#define BUS_CNTL1__PMI_MEM_DISABLE_MASK                    0x00000002L
+#define BUS_CNTL1__PMI_MEM_DISABLE                         0x00000002L
+#define BUS_CNTL1__PMI_BM_DISABLE_MASK                     0x00000004L
+#define BUS_CNTL1__PMI_BM_DISABLE                          0x00000004L
+#define BUS_CNTL1__PMI_INT_DISABLE_MASK                    0x00000008L
+#define BUS_CNTL1__PMI_INT_DISABLE                         0x00000008L
+#define BUS_CNTL1__BUS2_IMMEDIATE_PMI_DISABLE_MASK         0x00000020L
+#define BUS_CNTL1__BUS2_IMMEDIATE_PMI_DISABLE              0x00000020L
+#define BUS_CNTL1__BUS2_VGA_REG_COHERENCY_DIS_MASK         0x00000100L
+#define BUS_CNTL1__BUS2_VGA_REG_COHERENCY_DIS              0x00000100L
+#define BUS_CNTL1__BUS2_VGA_MEM_COHERENCY_DIS_MASK         0x00000200L
+#define BUS_CNTL1__BUS2_VGA_MEM_COHERENCY_DIS              0x00000200L
+#define BUS_CNTL1__BUS2_HDP_REG_COHERENCY_DIS_MASK         0x00000400L
+#define BUS_CNTL1__BUS2_HDP_REG_COHERENCY_DIS              0x00000400L
+#define BUS_CNTL1__BUS2_GUI_INITIATOR_COHERENCY_DIS_MASK   0x00000800L
+#define BUS_CNTL1__BUS2_GUI_INITIATOR_COHERENCY_DIS        0x00000800L
+#define BUS_CNTL1__MOBILE_PLATFORM_SEL_MASK                0x0c000000L
+#define BUS_CNTL1__SEND_SBA_LATENCY_MASK                   0x70000000L
+#define BUS_CNTL1__AGPCLK_VALID_MASK                       0x80000000L
+#define BUS_CNTL1__AGPCLK_VALID                            0x80000000L
+
+// BUS_CNTL1
+#define	BUS_CNTL1__PMI_IO_DISABLE__SHIFT                   0x00000000
+#define	BUS_CNTL1__PMI_MEM_DISABLE__SHIFT                  0x00000001
+#define	BUS_CNTL1__PMI_BM_DISABLE__SHIFT                   0x00000002
+#define	BUS_CNTL1__PMI_INT_DISABLE__SHIFT                  0x00000003
+#define	BUS_CNTL1__BUS2_IMMEDIATE_PMI_DISABLE__SHIFT       0x00000005
+#define	BUS_CNTL1__BUS2_VGA_REG_COHERENCY_DIS__SHIFT       0x00000008
+#define	BUS_CNTL1__BUS2_VGA_MEM_COHERENCY_DIS__SHIFT       0x00000009
+#define	BUS_CNTL1__BUS2_HDP_REG_COHERENCY_DIS__SHIFT       0x0000000a
+#define	BUS_CNTL1__BUS2_GUI_INITIATOR_COHERENCY_DIS__SHIFT 0x0000000b
+#define	BUS_CNTL1__MOBILE_PLATFORM_SEL__SHIFT              0x0000001a
+#define	BUS_CNTL1__SEND_SBA_LATENCY__SHIFT                 0x0000001c
+#define	BUS_CNTL1__AGPCLK_VALID__SHIFT                     0x0000001f
+
+// CRTC_OFFSET_CNTL
+#define CRTC_OFFSET_CNTL__CRTC_TILE_LINE_MASK              0x0000000fL
+#define CRTC_OFFSET_CNTL__CRTC_TILE_LINE_RIGHT_MASK        0x000000f0L
+#define CRTC_OFFSET_CNTL__CRTC_TILE_EN_RIGHT_MASK          0x00004000L
+#define CRTC_OFFSET_CNTL__CRTC_TILE_EN_RIGHT               0x00004000L
+#define CRTC_OFFSET_CNTL__CRTC_TILE_EN_MASK                0x00008000L
+#define CRTC_OFFSET_CNTL__CRTC_TILE_EN                     0x00008000L
+#define CRTC_OFFSET_CNTL__CRTC_OFFSET_FLIP_CNTL_MASK       0x00010000L
+#define CRTC_OFFSET_CNTL__CRTC_OFFSET_FLIP_CNTL            0x00010000L
+#define CRTC_OFFSET_CNTL__CRTC_STEREO_OFFSET_EN_MASK       0x00020000L
+#define CRTC_OFFSET_CNTL__CRTC_STEREO_OFFSET_EN            0x00020000L
+#define CRTC_OFFSET_CNTL__CRTC_STEREO_SYNC_EN_MASK         0x000c0000L
+#define CRTC_OFFSET_CNTL__CRTC_STEREO_SYNC_OUT_EN_MASK     0x00100000L
+#define CRTC_OFFSET_CNTL__CRTC_STEREO_SYNC_OUT_EN          0x00100000L
+#define CRTC_OFFSET_CNTL__CRTC_STEREO_SYNC_MASK            0x00200000L
+#define CRTC_OFFSET_CNTL__CRTC_STEREO_SYNC                 0x00200000L
+#define CRTC_OFFSET_CNTL__CRTC_GUI_TRIG_OFFSET_LEFT_EN_MASK 0x10000000L
+#define CRTC_OFFSET_CNTL__CRTC_GUI_TRIG_OFFSET_LEFT_EN     0x10000000L
+#define CRTC_OFFSET_CNTL__CRTC_GUI_TRIG_OFFSET_RIGHT_EN_MASK 0x20000000L
+#define CRTC_OFFSET_CNTL__CRTC_GUI_TRIG_OFFSET_RIGHT_EN    0x20000000L
+#define CRTC_OFFSET_CNTL__CRTC_GUI_TRIG_OFFSET_MASK        0x40000000L
+#define CRTC_OFFSET_CNTL__CRTC_GUI_TRIG_OFFSET             0x40000000L
+#define CRTC_OFFSET_CNTL__CRTC_OFFSET_LOCK_MASK            0x80000000L
+#define CRTC_OFFSET_CNTL__CRTC_OFFSET_LOCK                 0x80000000L
+
+// CRTC_GEN_CNTL
+#define CRTC_GEN_CNTL__CRTC_DBL_SCAN_EN_MASK               0x00000001L
+#define CRTC_GEN_CNTL__CRTC_DBL_SCAN_EN                    0x00000001L
+#define CRTC_GEN_CNTL__CRTC_INTERLACE_EN_MASK              0x00000002L
+#define CRTC_GEN_CNTL__CRTC_INTERLACE_EN                   0x00000002L
+#define CRTC_GEN_CNTL__CRTC_C_SYNC_EN_MASK                 0x00000010L
+#define CRTC_GEN_CNTL__CRTC_C_SYNC_EN                      0x00000010L
+#define CRTC_GEN_CNTL__CRTC_PIX_WIDTH_MASK                 0x00000f00L
+#define CRTC_GEN_CNTL__CRTC_ICON_EN_MASK                   0x00008000L
+#define CRTC_GEN_CNTL__CRTC_ICON_EN                        0x00008000L
+#define CRTC_GEN_CNTL__CRTC_CUR_EN_MASK                    0x00010000L
+#define CRTC_GEN_CNTL__CRTC_CUR_EN                         0x00010000L
+#define CRTC_GEN_CNTL__CRTC_VSTAT_MODE_MASK                0x00060000L
+#define CRTC_GEN_CNTL__CRTC_CUR_MODE_MASK                  0x00700000L
+#define CRTC_GEN_CNTL__CRTC_EXT_DISP_EN_MASK               0x01000000L
+#define CRTC_GEN_CNTL__CRTC_EXT_DISP_EN                    0x01000000L
+#define CRTC_GEN_CNTL__CRTC_EN_MASK                        0x02000000L
+#define CRTC_GEN_CNTL__CRTC_EN                             0x02000000L
+#define CRTC_GEN_CNTL__CRTC_DISP_REQ_EN_B_MASK             0x04000000L
+#define CRTC_GEN_CNTL__CRTC_DISP_REQ_EN_B                  0x04000000L
+
+// CRTC2_GEN_CNTL
+#define CRTC2_GEN_CNTL__CRTC2_DBL_SCAN_EN_MASK             0x00000001L
+#define CRTC2_GEN_CNTL__CRTC2_DBL_SCAN_EN                  0x00000001L
+#define CRTC2_GEN_CNTL__CRTC2_INTERLACE_EN_MASK            0x00000002L
+#define CRTC2_GEN_CNTL__CRTC2_INTERLACE_EN                 0x00000002L
+#define CRTC2_GEN_CNTL__CRTC2_SYNC_TRISTATE_MASK           0x00000010L
+#define CRTC2_GEN_CNTL__CRTC2_SYNC_TRISTATE                0x00000010L
+#define CRTC2_GEN_CNTL__CRTC2_HSYNC_TRISTATE_MASK          0x00000020L
+#define CRTC2_GEN_CNTL__CRTC2_HSYNC_TRISTATE               0x00000020L
+#define CRTC2_GEN_CNTL__CRTC2_VSYNC_TRISTATE_MASK          0x00000040L
+#define CRTC2_GEN_CNTL__CRTC2_VSYNC_TRISTATE               0x00000040L
+#define CRTC2_GEN_CNTL__CRT2_ON_MASK                       0x00000080L
+#define CRTC2_GEN_CNTL__CRT2_ON                            0x00000080L
+#define CRTC2_GEN_CNTL__CRTC2_PIX_WIDTH_MASK               0x00000f00L
+#define CRTC2_GEN_CNTL__CRTC2_ICON_EN_MASK                 0x00008000L
+#define CRTC2_GEN_CNTL__CRTC2_ICON_EN                      0x00008000L
+#define CRTC2_GEN_CNTL__CRTC2_CUR_EN_MASK                  0x00010000L
+#define CRTC2_GEN_CNTL__CRTC2_CUR_EN                       0x00010000L
+#define CRTC2_GEN_CNTL__CRTC2_CUR_MODE_MASK                0x00700000L
+#define CRTC2_GEN_CNTL__CRTC2_DISPLAY_DIS_MASK             0x00800000L
+#define CRTC2_GEN_CNTL__CRTC2_DISPLAY_DIS                  0x00800000L
+#define CRTC2_GEN_CNTL__CRTC2_EN_MASK                      0x02000000L
+#define CRTC2_GEN_CNTL__CRTC2_EN                           0x02000000L
+#define CRTC2_GEN_CNTL__CRTC2_DISP_REQ_EN_B_MASK           0x04000000L
+#define CRTC2_GEN_CNTL__CRTC2_DISP_REQ_EN_B                0x04000000L
+#define CRTC2_GEN_CNTL__CRTC2_C_SYNC_EN_MASK               0x08000000L
+#define CRTC2_GEN_CNTL__CRTC2_C_SYNC_EN                    0x08000000L
+#define CRTC2_GEN_CNTL__CRTC2_HSYNC_DIS_MASK               0x10000000L
+#define CRTC2_GEN_CNTL__CRTC2_HSYNC_DIS                    0x10000000L
+#define CRTC2_GEN_CNTL__CRTC2_VSYNC_DIS_MASK               0x20000000L
+#define CRTC2_GEN_CNTL__CRTC2_VSYNC_DIS                    0x20000000L
+
+// AGP_CNTL
+#define AGP_CNTL__MAX_IDLE_CLK_MASK                        0x000000ffL
+#define AGP_CNTL__HOLD_RD_FIFO_MASK                        0x00000100L
+#define AGP_CNTL__HOLD_RD_FIFO                             0x00000100L
+#define AGP_CNTL__HOLD_RQ_FIFO_MASK                        0x00000200L
+#define AGP_CNTL__HOLD_RQ_FIFO                             0x00000200L
+#define AGP_CNTL__EN_2X_STBB_MASK                          0x00000400L
+#define AGP_CNTL__EN_2X_STBB                               0x00000400L
+#define AGP_CNTL__FORCE_FULL_SBA_MASK                      0x00000800L
+#define AGP_CNTL__FORCE_FULL_SBA                           0x00000800L
+#define AGP_CNTL__SBA_DIS_MASK                             0x00001000L
+#define AGP_CNTL__SBA_DIS                                  0x00001000L
+#define AGP_CNTL__AGP_REV_ID_MASK                          0x00002000L
+#define AGP_CNTL__AGP_REV_ID                               0x00002000L
+#define AGP_CNTL__REG_CRIPPLE_AGP4X_MASK                   0x00004000L
+#define AGP_CNTL__REG_CRIPPLE_AGP4X                        0x00004000L
+#define AGP_CNTL__REG_CRIPPLE_AGP2X4X_MASK                 0x00008000L
+#define AGP_CNTL__REG_CRIPPLE_AGP2X4X                      0x00008000L
+#define AGP_CNTL__FORCE_INT_VREF_MASK                      0x00010000L
+#define AGP_CNTL__FORCE_INT_VREF                           0x00010000L
+#define AGP_CNTL__PENDING_SLOTS_VAL_MASK                   0x00060000L
+#define AGP_CNTL__PENDING_SLOTS_SEL_MASK                   0x00080000L
+#define AGP_CNTL__PENDING_SLOTS_SEL                        0x00080000L
+#define AGP_CNTL__EN_EXTENDED_AD_STB_2X_MASK               0x00100000L
+#define AGP_CNTL__EN_EXTENDED_AD_STB_2X                    0x00100000L
+#define AGP_CNTL__DIS_QUEUED_GNT_FIX_MASK                  0x00200000L
+#define AGP_CNTL__DIS_QUEUED_GNT_FIX                       0x00200000L
+#define AGP_CNTL__EN_RDATA2X4X_MULTIRESET_MASK             0x00400000L
+#define AGP_CNTL__EN_RDATA2X4X_MULTIRESET                  0x00400000L
+#define AGP_CNTL__EN_RBFCALM_MASK                          0x00800000L
+#define AGP_CNTL__EN_RBFCALM                               0x00800000L
+#define AGP_CNTL__FORCE_EXT_VREF_MASK                      0x01000000L
+#define AGP_CNTL__FORCE_EXT_VREF                           0x01000000L
+#define AGP_CNTL__DIS_RBF_MASK                             0x02000000L
+#define AGP_CNTL__DIS_RBF                                  0x02000000L
+#define AGP_CNTL__DELAY_FIRST_SBA_EN_MASK                  0x04000000L
+#define AGP_CNTL__DELAY_FIRST_SBA_EN                       0x04000000L
+#define AGP_CNTL__DELAY_FIRST_SBA_VAL_MASK                 0x38000000L
+#define AGP_CNTL__AGP_MISC_MASK                            0xc0000000L
+
+// AGP_CNTL
+#define	AGP_CNTL__MAX_IDLE_CLK__SHIFT                      0x00000000
+#define	AGP_CNTL__HOLD_RD_FIFO__SHIFT                      0x00000008
+#define	AGP_CNTL__HOLD_RQ_FIFO__SHIFT                      0x00000009
+#define	AGP_CNTL__EN_2X_STBB__SHIFT                        0x0000000a
+#define	AGP_CNTL__FORCE_FULL_SBA__SHIFT                    0x0000000b
+#define	AGP_CNTL__SBA_DIS__SHIFT                           0x0000000c
+#define	AGP_CNTL__AGP_REV_ID__SHIFT                        0x0000000d
+#define	AGP_CNTL__REG_CRIPPLE_AGP4X__SHIFT                 0x0000000e
+#define	AGP_CNTL__REG_CRIPPLE_AGP2X4X__SHIFT               0x0000000f
+#define	AGP_CNTL__FORCE_INT_VREF__SHIFT                    0x00000010
+#define	AGP_CNTL__PENDING_SLOTS_VAL__SHIFT                 0x00000011
+#define	AGP_CNTL__PENDING_SLOTS_SEL__SHIFT                 0x00000013
+#define	AGP_CNTL__EN_EXTENDED_AD_STB_2X__SHIFT             0x00000014
+#define	AGP_CNTL__DIS_QUEUED_GNT_FIX__SHIFT                0x00000015
+#define	AGP_CNTL__EN_RDATA2X4X_MULTIRESET__SHIFT           0x00000016
+#define	AGP_CNTL__EN_RBFCALM__SHIFT                        0x00000017
+#define	AGP_CNTL__FORCE_EXT_VREF__SHIFT                    0x00000018
+#define	AGP_CNTL__DIS_RBF__SHIFT                           0x00000019
+#define	AGP_CNTL__DELAY_FIRST_SBA_EN__SHIFT                0x0000001a
+#define	AGP_CNTL__DELAY_FIRST_SBA_VAL__SHIFT               0x0000001b
+#define	AGP_CNTL__AGP_MISC__SHIFT                          0x0000001e
+
+// DISP_MISC_CNTL
+#define DISP_MISC_CNTL__SOFT_RESET_GRPH_PP_MASK            0x00000001L
+#define DISP_MISC_CNTL__SOFT_RESET_GRPH_PP                 0x00000001L
+#define DISP_MISC_CNTL__SOFT_RESET_SUBPIC_PP_MASK          0x00000002L
+#define DISP_MISC_CNTL__SOFT_RESET_SUBPIC_PP               0x00000002L
+#define DISP_MISC_CNTL__SOFT_RESET_OV0_PP_MASK             0x00000004L
+#define DISP_MISC_CNTL__SOFT_RESET_OV0_PP                  0x00000004L
+#define DISP_MISC_CNTL__SOFT_RESET_GRPH_SCLK_MASK          0x00000010L
+#define DISP_MISC_CNTL__SOFT_RESET_GRPH_SCLK               0x00000010L
+#define DISP_MISC_CNTL__SOFT_RESET_SUBPIC_SCLK_MASK        0x00000020L
+#define DISP_MISC_CNTL__SOFT_RESET_SUBPIC_SCLK             0x00000020L
+#define DISP_MISC_CNTL__SOFT_RESET_OV0_SCLK_MASK           0x00000040L
+#define DISP_MISC_CNTL__SOFT_RESET_OV0_SCLK                0x00000040L
+#define DISP_MISC_CNTL__SYNC_STRENGTH_MASK                 0x00000300L
+#define DISP_MISC_CNTL__SYNC_PAD_FLOP_EN_MASK              0x00000400L
+#define DISP_MISC_CNTL__SYNC_PAD_FLOP_EN                   0x00000400L
+#define DISP_MISC_CNTL__SOFT_RESET_GRPH2_PP_MASK           0x00001000L
+#define DISP_MISC_CNTL__SOFT_RESET_GRPH2_PP                0x00001000L
+#define DISP_MISC_CNTL__SOFT_RESET_GRPH2_SCLK_MASK         0x00008000L
+#define DISP_MISC_CNTL__SOFT_RESET_GRPH2_SCLK              0x00008000L
+#define DISP_MISC_CNTL__SOFT_RESET_LVDS_MASK               0x00010000L
+#define DISP_MISC_CNTL__SOFT_RESET_LVDS                    0x00010000L
+#define DISP_MISC_CNTL__SOFT_RESET_TMDS_MASK               0x00020000L
+#define DISP_MISC_CNTL__SOFT_RESET_TMDS                    0x00020000L
+#define DISP_MISC_CNTL__SOFT_RESET_DIG_TMDS_MASK           0x00040000L
+#define DISP_MISC_CNTL__SOFT_RESET_DIG_TMDS                0x00040000L
+#define DISP_MISC_CNTL__SOFT_RESET_TV_MASK                 0x00080000L
+#define DISP_MISC_CNTL__SOFT_RESET_TV                      0x00080000L
+#define DISP_MISC_CNTL__PALETTE2_MEM_RD_MARGIN_MASK        0x00f00000L
+#define DISP_MISC_CNTL__PALETTE_MEM_RD_MARGIN_MASK         0x0f000000L
+#define DISP_MISC_CNTL__RMX_BUF_MEM_RD_MARGIN_MASK         0xf0000000L
+
+// DISP_PWR_MAN
+#define DISP_PWR_MAN__DISP_PWR_MAN_D3_CRTC_EN_MASK         0x00000001L
+#define DISP_PWR_MAN__DISP_PWR_MAN_D3_CRTC_EN              0x00000001L
+#define DISP_PWR_MAN__DISP2_PWR_MAN_D3_CRTC2_EN_MASK       0x00000010L
+#define DISP_PWR_MAN__DISP2_PWR_MAN_D3_CRTC2_EN            0x00000010L
+#define DISP_PWR_MAN__DISP_PWR_MAN_DPMS_MASK               0x00000300L
+#define DISP_PWR_MAN__DISP_D3_RST_MASK                     0x00010000L
+#define DISP_PWR_MAN__DISP_D3_RST                          0x00010000L
+#define DISP_PWR_MAN__DISP_D3_REG_RST_MASK                 0x00020000L
+#define DISP_PWR_MAN__DISP_D3_REG_RST                      0x00020000L
+#define DISP_PWR_MAN__DISP_D3_GRPH_RST_MASK                0x00040000L
+#define DISP_PWR_MAN__DISP_D3_GRPH_RST                     0x00040000L
+#define DISP_PWR_MAN__DISP_D3_SUBPIC_RST_MASK              0x00080000L
+#define DISP_PWR_MAN__DISP_D3_SUBPIC_RST                   0x00080000L
+#define DISP_PWR_MAN__DISP_D3_OV0_RST_MASK                 0x00100000L
+#define DISP_PWR_MAN__DISP_D3_OV0_RST                      0x00100000L
+#define DISP_PWR_MAN__DISP_D1D2_GRPH_RST_MASK              0x00200000L
+#define DISP_PWR_MAN__DISP_D1D2_GRPH_RST                   0x00200000L
+#define DISP_PWR_MAN__DISP_D1D2_SUBPIC_RST_MASK            0x00400000L
+#define DISP_PWR_MAN__DISP_D1D2_SUBPIC_RST                 0x00400000L
+#define DISP_PWR_MAN__DISP_D1D2_OV0_RST_MASK               0x00800000L
+#define DISP_PWR_MAN__DISP_D1D2_OV0_RST                    0x00800000L
+#define DISP_PWR_MAN__DIG_TMDS_ENABLE_RST_MASK             0x01000000L
+#define DISP_PWR_MAN__DIG_TMDS_ENABLE_RST                  0x01000000L
+#define DISP_PWR_MAN__TV_ENABLE_RST_MASK                   0x02000000L
+#define DISP_PWR_MAN__TV_ENABLE_RST                        0x02000000L
+#define DISP_PWR_MAN__AUTO_PWRUP_EN_MASK                   0x04000000L
+#define DISP_PWR_MAN__AUTO_PWRUP_EN                        0x04000000L
+
+// MC_IND_INDEX
+#define MC_IND_INDEX__MC_IND_ADDR_MASK                     0x0000001fL
+#define MC_IND_INDEX__MC_IND_WR_EN_MASK                    0x00000100L
+#define MC_IND_INDEX__MC_IND_WR_EN                         0x00000100L
+
+// MC_IND_DATA
+#define MC_IND_DATA__MC_IND_DATA_MASK                      0xffffffffL
+
+// MC_CHP_IO_CNTL_A1
+#define	MC_CHP_IO_CNTL_A1__MEM_SLEWN_CKA__SHIFT            0x00000000
+#define	MC_CHP_IO_CNTL_A1__MEM_SLEWN_AA__SHIFT             0x00000001
+#define	MC_CHP_IO_CNTL_A1__MEM_SLEWN_DQMA__SHIFT           0x00000002
+#define	MC_CHP_IO_CNTL_A1__MEM_SLEWN_DQSA__SHIFT           0x00000003
+#define	MC_CHP_IO_CNTL_A1__MEM_SLEWP_CKA__SHIFT            0x00000004
+#define	MC_CHP_IO_CNTL_A1__MEM_SLEWP_AA__SHIFT             0x00000005
+#define	MC_CHP_IO_CNTL_A1__MEM_SLEWP_DQMA__SHIFT           0x00000006
+#define	MC_CHP_IO_CNTL_A1__MEM_SLEWP_DQSA__SHIFT           0x00000007
+#define	MC_CHP_IO_CNTL_A1__MEM_PREAMP_AA__SHIFT            0x00000008
+#define	MC_CHP_IO_CNTL_A1__MEM_PREAMP_DQMA__SHIFT          0x00000009
+#define	MC_CHP_IO_CNTL_A1__MEM_PREAMP_DQSA__SHIFT          0x0000000a
+#define	MC_CHP_IO_CNTL_A1__MEM_IO_MODEA__SHIFT             0x0000000c
+#define	MC_CHP_IO_CNTL_A1__MEM_REC_CKA__SHIFT              0x0000000e
+#define	MC_CHP_IO_CNTL_A1__MEM_REC_AA__SHIFT               0x00000010
+#define	MC_CHP_IO_CNTL_A1__MEM_REC_DQMA__SHIFT             0x00000012
+#define	MC_CHP_IO_CNTL_A1__MEM_REC_DQSA__SHIFT             0x00000014
+#define	MC_CHP_IO_CNTL_A1__MEM_SYNC_PHASEA__SHIFT          0x00000016
+#define	MC_CHP_IO_CNTL_A1__MEM_SYNC_CENTERA__SHIFT         0x00000017
+#define	MC_CHP_IO_CNTL_A1__MEM_SYNC_ENA__SHIFT             0x00000018
+#define	MC_CHP_IO_CNTL_A1__MEM_CLK_SELA__SHIFT             0x0000001a
+#define	MC_CHP_IO_CNTL_A1__MEM_CLK_INVA__SHIFT             0x0000001c
+#define	MC_CHP_IO_CNTL_A1__MEM_DATA_ENIMP_A__SHIFT         0x0000001e
+#define	MC_CHP_IO_CNTL_A1__MEM_CNTL_ENIMP_A__SHIFT         0x0000001f
+
+// MC_CHP_IO_CNTL_B1
+#define	MC_CHP_IO_CNTL_B1__MEM_SLEWN_CKB__SHIFT            0x00000000
+#define	MC_CHP_IO_CNTL_B1__MEM_SLEWN_AB__SHIFT             0x00000001
+#define	MC_CHP_IO_CNTL_B1__MEM_SLEWN_DQMB__SHIFT           0x00000002
+#define	MC_CHP_IO_CNTL_B1__MEM_SLEWN_DQSB__SHIFT           0x00000003
+#define	MC_CHP_IO_CNTL_B1__MEM_SLEWP_CKB__SHIFT            0x00000004
+#define	MC_CHP_IO_CNTL_B1__MEM_SLEWP_AB__SHIFT             0x00000005
+#define	MC_CHP_IO_CNTL_B1__MEM_SLEWP_DQMB__SHIFT           0x00000006
+#define	MC_CHP_IO_CNTL_B1__MEM_SLEWP_DQSB__SHIFT           0x00000007
+#define	MC_CHP_IO_CNTL_B1__MEM_PREAMP_AB__SHIFT            0x00000008
+#define	MC_CHP_IO_CNTL_B1__MEM_PREAMP_DQMB__SHIFT          0x00000009
+#define	MC_CHP_IO_CNTL_B1__MEM_PREAMP_DQSB__SHIFT          0x0000000a
+#define	MC_CHP_IO_CNTL_B1__MEM_IO_MODEB__SHIFT             0x0000000c
+#define	MC_CHP_IO_CNTL_B1__MEM_REC_CKB__SHIFT              0x0000000e
+#define	MC_CHP_IO_CNTL_B1__MEM_REC_AB__SHIFT               0x00000010
+#define	MC_CHP_IO_CNTL_B1__MEM_REC_DQMB__SHIFT             0x00000012
+#define	MC_CHP_IO_CNTL_B1__MEM_REC_DQSB__SHIFT             0x00000014
+#define	MC_CHP_IO_CNTL_B1__MEM_SYNC_PHASEB__SHIFT          0x00000016
+#define	MC_CHP_IO_CNTL_B1__MEM_SYNC_CENTERB__SHIFT         0x00000017
+#define	MC_CHP_IO_CNTL_B1__MEM_SYNC_ENB__SHIFT             0x00000018
+#define	MC_CHP_IO_CNTL_B1__MEM_CLK_SELB__SHIFT             0x0000001a
+#define	MC_CHP_IO_CNTL_B1__MEM_CLK_INVB__SHIFT             0x0000001c
+#define	MC_CHP_IO_CNTL_B1__MEM_DATA_ENIMP_B__SHIFT         0x0000001e
+#define	MC_CHP_IO_CNTL_B1__MEM_CNTL_ENIMP_B__SHIFT         0x0000001f
+
+// MC_CHP_IO_CNTL_A1
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWN_CKA_MASK              0x00000001L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWN_CKA                   0x00000001L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWN_AA_MASK               0x00000002L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWN_AA                    0x00000002L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWN_DQMA_MASK             0x00000004L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWN_DQMA                  0x00000004L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWN_DQSA_MASK             0x00000008L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWN_DQSA                  0x00000008L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWP_CKA_MASK              0x00000010L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWP_CKA                   0x00000010L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWP_AA_MASK               0x00000020L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWP_AA                    0x00000020L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWP_DQMA_MASK             0x00000040L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWP_DQMA                  0x00000040L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWP_DQSA_MASK             0x00000080L
+#define MC_CHP_IO_CNTL_A1__MEM_SLEWP_DQSA                  0x00000080L
+#define MC_CHP_IO_CNTL_A1__MEM_PREAMP_AA_MASK              0x00000100L
+#define MC_CHP_IO_CNTL_A1__MEM_PREAMP_AA                   0x00000100L
+#define MC_CHP_IO_CNTL_A1__MEM_PREAMP_DQMA_MASK            0x00000200L
+#define MC_CHP_IO_CNTL_A1__MEM_PREAMP_DQMA                 0x00000200L
+#define MC_CHP_IO_CNTL_A1__MEM_PREAMP_DQSA_MASK            0x00000400L
+#define MC_CHP_IO_CNTL_A1__MEM_PREAMP_DQSA                 0x00000400L
+#define MC_CHP_IO_CNTL_A1__MEM_IO_MODEA_MASK               0x00003000L
+#define MC_CHP_IO_CNTL_A1__MEM_REC_CKA_MASK                0x0000c000L
+#define MC_CHP_IO_CNTL_A1__MEM_REC_AA_MASK                 0x00030000L
+#define MC_CHP_IO_CNTL_A1__MEM_REC_DQMA_MASK               0x000c0000L
+#define MC_CHP_IO_CNTL_A1__MEM_REC_DQSA_MASK               0x00300000L
+#define MC_CHP_IO_CNTL_A1__MEM_SYNC_PHASEA_MASK            0x00400000L
+#define MC_CHP_IO_CNTL_A1__MEM_SYNC_PHASEA                 0x00400000L
+#define MC_CHP_IO_CNTL_A1__MEM_SYNC_CENTERA_MASK           0x00800000L
+#define MC_CHP_IO_CNTL_A1__MEM_SYNC_CENTERA                0x00800000L
+#define MC_CHP_IO_CNTL_A1__MEM_SYNC_ENA_MASK               0x03000000L
+#define MC_CHP_IO_CNTL_A1__MEM_CLK_SELA_MASK               0x0c000000L
+#define MC_CHP_IO_CNTL_A1__MEM_CLK_INVA_MASK               0x10000000L
+#define MC_CHP_IO_CNTL_A1__MEM_CLK_INVA                    0x10000000L
+#define MC_CHP_IO_CNTL_A1__MEM_DATA_ENIMP_A_MASK           0x40000000L
+#define MC_CHP_IO_CNTL_A1__MEM_DATA_ENIMP_A                0x40000000L
+#define MC_CHP_IO_CNTL_A1__MEM_CNTL_ENIMP_A_MASK           0x80000000L
+#define MC_CHP_IO_CNTL_A1__MEM_CNTL_ENIMP_A                0x80000000L
+
+// MC_CHP_IO_CNTL_B1
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWN_CKB_MASK              0x00000001L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWN_CKB                   0x00000001L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWN_AB_MASK               0x00000002L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWN_AB                    0x00000002L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWN_DQMB_MASK             0x00000004L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWN_DQMB                  0x00000004L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWN_DQSB_MASK             0x00000008L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWN_DQSB                  0x00000008L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWP_CKB_MASK              0x00000010L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWP_CKB                   0x00000010L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWP_AB_MASK               0x00000020L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWP_AB                    0x00000020L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWP_DQMB_MASK             0x00000040L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWP_DQMB                  0x00000040L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWP_DQSB_MASK             0x00000080L
+#define MC_CHP_IO_CNTL_B1__MEM_SLEWP_DQSB                  0x00000080L
+#define MC_CHP_IO_CNTL_B1__MEM_PREAMP_AB_MASK              0x00000100L
+#define MC_CHP_IO_CNTL_B1__MEM_PREAMP_AB                   0x00000100L
+#define MC_CHP_IO_CNTL_B1__MEM_PREAMP_DQMB_MASK            0x00000200L
+#define MC_CHP_IO_CNTL_B1__MEM_PREAMP_DQMB                 0x00000200L
+#define MC_CHP_IO_CNTL_B1__MEM_PREAMP_DQSB_MASK            0x00000400L
+#define MC_CHP_IO_CNTL_B1__MEM_PREAMP_DQSB                 0x00000400L
+#define MC_CHP_IO_CNTL_B1__MEM_IO_MODEB_MASK               0x00003000L
+#define MC_CHP_IO_CNTL_B1__MEM_REC_CKB_MASK                0x0000c000L
+#define MC_CHP_IO_CNTL_B1__MEM_REC_AB_MASK                 0x00030000L
+#define MC_CHP_IO_CNTL_B1__MEM_REC_DQMB_MASK               0x000c0000L
+#define MC_CHP_IO_CNTL_B1__MEM_REC_DQSB_MASK               0x00300000L
+#define MC_CHP_IO_CNTL_B1__MEM_SYNC_PHASEB_MASK            0x00400000L
+#define MC_CHP_IO_CNTL_B1__MEM_SYNC_PHASEB                 0x00400000L
+#define MC_CHP_IO_CNTL_B1__MEM_SYNC_CENTERB_MASK           0x00800000L
+#define MC_CHP_IO_CNTL_B1__MEM_SYNC_CENTERB                0x00800000L
+#define MC_CHP_IO_CNTL_B1__MEM_SYNC_ENB_MASK               0x03000000L
+#define MC_CHP_IO_CNTL_B1__MEM_CLK_SELB_MASK               0x0c000000L
+#define MC_CHP_IO_CNTL_B1__MEM_CLK_INVB_MASK               0x10000000L
+#define MC_CHP_IO_CNTL_B1__MEM_CLK_INVB                    0x10000000L
+#define MC_CHP_IO_CNTL_B1__MEM_DATA_ENIMP_B_MASK           0x40000000L
+#define MC_CHP_IO_CNTL_B1__MEM_DATA_ENIMP_B                0x40000000L
+#define MC_CHP_IO_CNTL_B1__MEM_CNTL_ENIMP_B_MASK           0x80000000L
+#define MC_CHP_IO_CNTL_B1__MEM_CNTL_ENIMP_B                0x80000000L
+
+// MEM_SDRAM_MODE_REG
+#define MEM_SDRAM_MODE_REG__MEM_MODE_REG_MASK              0x00007fffL
+#define MEM_SDRAM_MODE_REG__MEM_WR_LATENCY_MASK            0x000f0000L
+#define MEM_SDRAM_MODE_REG__MEM_CAS_LATENCY_MASK           0x00700000L
+#define MEM_SDRAM_MODE_REG__MEM_CMD_LATENCY_MASK           0x00800000L
+#define MEM_SDRAM_MODE_REG__MEM_CMD_LATENCY                0x00800000L
+#define MEM_SDRAM_MODE_REG__MEM_STR_LATENCY_MASK           0x01000000L
+#define MEM_SDRAM_MODE_REG__MEM_STR_LATENCY                0x01000000L
+#define MEM_SDRAM_MODE_REG__MEM_FALL_OUT_CMD_MASK          0x02000000L
+#define MEM_SDRAM_MODE_REG__MEM_FALL_OUT_CMD               0x02000000L
+#define MEM_SDRAM_MODE_REG__MEM_FALL_OUT_DATA_MASK         0x04000000L
+#define MEM_SDRAM_MODE_REG__MEM_FALL_OUT_DATA              0x04000000L
+#define MEM_SDRAM_MODE_REG__MEM_FALL_OUT_STR_MASK          0x08000000L
+#define MEM_SDRAM_MODE_REG__MEM_FALL_OUT_STR               0x08000000L
+#define MEM_SDRAM_MODE_REG__MC_INIT_COMPLETE_MASK          0x10000000L
+#define MEM_SDRAM_MODE_REG__MC_INIT_COMPLETE               0x10000000L
+#define MEM_SDRAM_MODE_REG__MEM_DDR_DLL_MASK               0x20000000L
+#define MEM_SDRAM_MODE_REG__MEM_DDR_DLL                    0x20000000L
+#define MEM_SDRAM_MODE_REG__MEM_CFG_TYPE_MASK              0x40000000L
+#define MEM_SDRAM_MODE_REG__MEM_CFG_TYPE                   0x40000000L
+#define MEM_SDRAM_MODE_REG__MEM_SDRAM_RESET_MASK           0x80000000L
+#define MEM_SDRAM_MODE_REG__MEM_SDRAM_RESET                0x80000000L
+
+// MEM_SDRAM_MODE_REG
+#define	MEM_SDRAM_MODE_REG__MEM_MODE_REG__SHIFT            0x00000000
+#define	MEM_SDRAM_MODE_REG__MEM_WR_LATENCY__SHIFT          0x00000010
+#define	MEM_SDRAM_MODE_REG__MEM_CAS_LATENCY__SHIFT         0x00000014
+#define	MEM_SDRAM_MODE_REG__MEM_CMD_LATENCY__SHIFT         0x00000017
+#define	MEM_SDRAM_MODE_REG__MEM_STR_LATENCY__SHIFT         0x00000018
+#define	MEM_SDRAM_MODE_REG__MEM_FALL_OUT_CMD__SHIFT        0x00000019
+#define	MEM_SDRAM_MODE_REG__MEM_FALL_OUT_DATA__SHIFT       0x0000001a
+#define	MEM_SDRAM_MODE_REG__MEM_FALL_OUT_STR__SHIFT        0x0000001b
+#define	MEM_SDRAM_MODE_REG__MC_INIT_COMPLETE__SHIFT        0x0000001c
+#define	MEM_SDRAM_MODE_REG__MEM_DDR_DLL__SHIFT             0x0000001d
+#define	MEM_SDRAM_MODE_REG__MEM_CFG_TYPE__SHIFT            0x0000001e
+#define	MEM_SDRAM_MODE_REG__MEM_SDRAM_RESET__SHIFT         0x0000001f
+
+// MEM_REFRESH_CNTL
+#define MEM_REFRESH_CNTL__MEM_REFRESH_RATE_MASK            0x000000ffL
+#define MEM_REFRESH_CNTL__MEM_REFRESH_DIS_MASK             0x00000100L
+#define MEM_REFRESH_CNTL__MEM_REFRESH_DIS                  0x00000100L
+#define MEM_REFRESH_CNTL__MEM_DYNAMIC_CKE_MASK             0x00000200L
+#define MEM_REFRESH_CNTL__MEM_DYNAMIC_CKE                  0x00000200L
+#define MEM_REFRESH_CNTL__MEM_TRFC_MASK                    0x0000f000L
+#define MEM_REFRESH_CNTL__MEM_CLKA0_ENABLE_MASK            0x00010000L
+#define MEM_REFRESH_CNTL__MEM_CLKA0_ENABLE                 0x00010000L
+#define MEM_REFRESH_CNTL__MEM_CLKA0b_ENABLE_MASK           0x00020000L
+#define MEM_REFRESH_CNTL__MEM_CLKA0b_ENABLE                0x00020000L
+#define MEM_REFRESH_CNTL__MEM_CLKA1_ENABLE_MASK            0x00040000L
+#define MEM_REFRESH_CNTL__MEM_CLKA1_ENABLE                 0x00040000L
+#define MEM_REFRESH_CNTL__MEM_CLKA1b_ENABLE_MASK           0x00080000L
+#define MEM_REFRESH_CNTL__MEM_CLKA1b_ENABLE                0x00080000L
+#define MEM_REFRESH_CNTL__MEM_CLKAFB_ENABLE_MASK           0x00100000L
+#define MEM_REFRESH_CNTL__MEM_CLKAFB_ENABLE                0x00100000L
+#define MEM_REFRESH_CNTL__DLL_FB_SLCT_CKA_MASK             0x00c00000L
+#define MEM_REFRESH_CNTL__MEM_CLKB0_ENABLE_MASK            0x01000000L
+#define MEM_REFRESH_CNTL__MEM_CLKB0_ENABLE                 0x01000000L
+#define MEM_REFRESH_CNTL__MEM_CLKB0b_ENABLE_MASK           0x02000000L
+#define MEM_REFRESH_CNTL__MEM_CLKB0b_ENABLE                0x02000000L
+#define MEM_REFRESH_CNTL__MEM_CLKB1_ENABLE_MASK            0x04000000L
+#define MEM_REFRESH_CNTL__MEM_CLKB1_ENABLE                 0x04000000L
+#define MEM_REFRESH_CNTL__MEM_CLKB1b_ENABLE_MASK           0x08000000L
+#define MEM_REFRESH_CNTL__MEM_CLKB1b_ENABLE                0x08000000L
+#define MEM_REFRESH_CNTL__MEM_CLKBFB_ENABLE_MASK           0x10000000L
+#define MEM_REFRESH_CNTL__MEM_CLKBFB_ENABLE                0x10000000L
+#define MEM_REFRESH_CNTL__DLL_FB_SLCT_CKB_MASK             0xc0000000L
+
+// MC_STATUS
+#define MC_STATUS__MEM_PWRUP_COMPL_A_MASK                  0x00000001L
+#define MC_STATUS__MEM_PWRUP_COMPL_A                       0x00000001L
+#define MC_STATUS__MEM_PWRUP_COMPL_B_MASK                  0x00000002L
+#define MC_STATUS__MEM_PWRUP_COMPL_B                       0x00000002L
+#define MC_STATUS__MC_IDLE_MASK                            0x00000004L
+#define MC_STATUS__MC_IDLE                                 0x00000004L
+#define MC_STATUS__IMP_N_VALUE_R_BACK_MASK                 0x00000078L
+#define MC_STATUS__IMP_P_VALUE_R_BACK_MASK                 0x00000780L
+#define MC_STATUS__TEST_OUT_R_BACK_MASK                    0x00000800L
+#define MC_STATUS__TEST_OUT_R_BACK                         0x00000800L
+#define MC_STATUS__DUMMY_OUT_R_BACK_MASK                   0x00001000L
+#define MC_STATUS__DUMMY_OUT_R_BACK                        0x00001000L
+#define MC_STATUS__IMP_N_VALUE_A_R_BACK_MASK               0x0001e000L
+#define MC_STATUS__IMP_P_VALUE_A_R_BACK_MASK               0x001e0000L
+#define MC_STATUS__IMP_N_VALUE_CK_R_BACK_MASK              0x01e00000L
+#define MC_STATUS__IMP_P_VALUE_CK_R_BACK_MASK              0x1e000000L
+
+// MDLL_CKO
+#define MDLL_CKO__MCKOA_SLEEP_MASK                         0x00000001L
+#define MDLL_CKO__MCKOA_SLEEP                              0x00000001L
+#define MDLL_CKO__MCKOA_RESET_MASK                         0x00000002L
+#define MDLL_CKO__MCKOA_RESET                              0x00000002L
+#define MDLL_CKO__MCKOA_RANGE_MASK                         0x0000000cL
+#define MDLL_CKO__ERSTA_SOUTSEL_MASK                       0x00000030L
+#define MDLL_CKO__MCKOA_FB_SEL_MASK                        0x000000c0L
+#define MDLL_CKO__MCKOA_REF_SKEW_MASK                      0x00000700L
+#define MDLL_CKO__MCKOA_FB_SKEW_MASK                       0x00007000L
+#define MDLL_CKO__MCKOA_BP_SEL_MASK                        0x00008000L
+#define MDLL_CKO__MCKOA_BP_SEL                             0x00008000L
+#define MDLL_CKO__MCKOB_SLEEP_MASK                         0x00010000L
+#define MDLL_CKO__MCKOB_SLEEP                              0x00010000L
+#define MDLL_CKO__MCKOB_RESET_MASK                         0x00020000L
+#define MDLL_CKO__MCKOB_RESET                              0x00020000L
+#define MDLL_CKO__MCKOB_RANGE_MASK                         0x000c0000L
+#define MDLL_CKO__ERSTB_SOUTSEL_MASK                       0x00300000L
+#define MDLL_CKO__MCKOB_FB_SEL_MASK                        0x00c00000L
+#define MDLL_CKO__MCKOB_REF_SKEW_MASK                      0x07000000L
+#define MDLL_CKO__MCKOB_FB_SKEW_MASK                       0x70000000L
+#define MDLL_CKO__MCKOB_BP_SEL_MASK                        0x80000000L
+#define MDLL_CKO__MCKOB_BP_SEL                             0x80000000L
+
+// MDLL_RDCKA
+#define MDLL_RDCKA__MRDCKA0_SLEEP_MASK                     0x00000001L
+#define MDLL_RDCKA__MRDCKA0_SLEEP                          0x00000001L
+#define MDLL_RDCKA__MRDCKA0_RESET_MASK                     0x00000002L
+#define MDLL_RDCKA__MRDCKA0_RESET                          0x00000002L
+#define MDLL_RDCKA__MRDCKA0_RANGE_MASK                     0x0000000cL
+#define MDLL_RDCKA__MRDCKA0_REF_SEL_MASK                   0x00000030L
+#define MDLL_RDCKA__MRDCKA0_FB_SEL_MASK                    0x000000c0L
+#define MDLL_RDCKA__MRDCKA0_REF_SKEW_MASK                  0x00000700L
+#define MDLL_RDCKA__MRDCKA0_SINSEL_MASK                    0x00000800L
+#define MDLL_RDCKA__MRDCKA0_SINSEL                         0x00000800L
+#define MDLL_RDCKA__MRDCKA0_FB_SKEW_MASK                   0x00007000L
+#define MDLL_RDCKA__MRDCKA0_BP_SEL_MASK                    0x00008000L
+#define MDLL_RDCKA__MRDCKA0_BP_SEL                         0x00008000L
+#define MDLL_RDCKA__MRDCKA1_SLEEP_MASK                     0x00010000L
+#define MDLL_RDCKA__MRDCKA1_SLEEP                          0x00010000L
+#define MDLL_RDCKA__MRDCKA1_RESET_MASK                     0x00020000L
+#define MDLL_RDCKA__MRDCKA1_RESET                          0x00020000L
+#define MDLL_RDCKA__MRDCKA1_RANGE_MASK                     0x000c0000L
+#define MDLL_RDCKA__MRDCKA1_REF_SEL_MASK                   0x00300000L
+#define MDLL_RDCKA__MRDCKA1_FB_SEL_MASK                    0x00c00000L
+#define MDLL_RDCKA__MRDCKA1_REF_SKEW_MASK                  0x07000000L
+#define MDLL_RDCKA__MRDCKA1_SINSEL_MASK                    0x08000000L
+#define MDLL_RDCKA__MRDCKA1_SINSEL                         0x08000000L
+#define MDLL_RDCKA__MRDCKA1_FB_SKEW_MASK                   0x70000000L
+#define MDLL_RDCKA__MRDCKA1_BP_SEL_MASK                    0x80000000L
+#define MDLL_RDCKA__MRDCKA1_BP_SEL                         0x80000000L
+
+// MDLL_RDCKB
+#define MDLL_RDCKB__MRDCKB0_SLEEP_MASK                     0x00000001L
+#define MDLL_RDCKB__MRDCKB0_SLEEP                          0x00000001L
+#define MDLL_RDCKB__MRDCKB0_RESET_MASK                     0x00000002L
+#define MDLL_RDCKB__MRDCKB0_RESET                          0x00000002L
+#define MDLL_RDCKB__MRDCKB0_RANGE_MASK                     0x0000000cL
+#define MDLL_RDCKB__MRDCKB0_REF_SEL_MASK                   0x00000030L
+#define MDLL_RDCKB__MRDCKB0_FB_SEL_MASK                    0x000000c0L
+#define MDLL_RDCKB__MRDCKB0_REF_SKEW_MASK                  0x00000700L
+#define MDLL_RDCKB__MRDCKB0_SINSEL_MASK                    0x00000800L
+#define MDLL_RDCKB__MRDCKB0_SINSEL                         0x00000800L
+#define MDLL_RDCKB__MRDCKB0_FB_SKEW_MASK                   0x00007000L
+#define MDLL_RDCKB__MRDCKB0_BP_SEL_MASK                    0x00008000L
+#define MDLL_RDCKB__MRDCKB0_BP_SEL                         0x00008000L
+#define MDLL_RDCKB__MRDCKB1_SLEEP_MASK                     0x00010000L
+#define MDLL_RDCKB__MRDCKB1_SLEEP                          0x00010000L
+#define MDLL_RDCKB__MRDCKB1_RESET_MASK                     0x00020000L
+#define MDLL_RDCKB__MRDCKB1_RESET                          0x00020000L
+#define MDLL_RDCKB__MRDCKB1_RANGE_MASK                     0x000c0000L
+#define MDLL_RDCKB__MRDCKB1_REF_SEL_MASK                   0x00300000L
+#define MDLL_RDCKB__MRDCKB1_FB_SEL_MASK                    0x00c00000L
+#define MDLL_RDCKB__MRDCKB1_REF_SKEW_MASK                  0x07000000L
+#define MDLL_RDCKB__MRDCKB1_SINSEL_MASK                    0x08000000L
+#define MDLL_RDCKB__MRDCKB1_SINSEL                         0x08000000L
+#define MDLL_RDCKB__MRDCKB1_FB_SKEW_MASK                   0x70000000L
+#define MDLL_RDCKB__MRDCKB1_BP_SEL_MASK                    0x80000000L
+#define MDLL_RDCKB__MRDCKB1_BP_SEL                         0x80000000L
+
+#define MDLL_R300_RDCK__MRDCKA_SLEEP                       0x00000001L
+#define MDLL_R300_RDCK__MRDCKA_RESET                       0x00000002L
+#define MDLL_R300_RDCK__MRDCKB_SLEEP                       0x00000004L
+#define MDLL_R300_RDCK__MRDCKB_RESET                       0x00000008L
+#define MDLL_R300_RDCK__MRDCKC_SLEEP                       0x00000010L
+#define MDLL_R300_RDCK__MRDCKC_RESET                       0x00000020L
+#define MDLL_R300_RDCK__MRDCKD_SLEEP                       0x00000040L
+#define MDLL_R300_RDCK__MRDCKD_RESET                       0x00000080L
+
+#define pllCLK_PIN_CNTL                             0x0001
+#define pllPPLL_CNTL                                0x0002
+#define pllPPLL_REF_DIV                             0x0003
+#define pllPPLL_DIV_0                               0x0004
+#define pllPPLL_DIV_1                               0x0005
+#define pllPPLL_DIV_2                               0x0006
+#define pllPPLL_DIV_3                               0x0007
+#define pllVCLK_ECP_CNTL                            0x0008
+#define pllHTOTAL_CNTL                              0x0009
+#define pllM_SPLL_REF_FB_DIV                        0x000A
+#define pllAGP_PLL_CNTL                             0x000B
+#define pllSPLL_CNTL                                0x000C
+#define pllSCLK_CNTL                                0x000D
+#define pllMPLL_CNTL                                0x000E
+#define pllMDLL_CKO                                 0x000F
+#define pllMDLL_RDCKA                               0x0010
+#define pllMDLL_RDCKB                               0x0011
+#define pllMCLK_CNTL                                0x0012
+#define pllPLL_TEST_CNTL                            0x0013
+#define pllCLK_PWRMGT_CNTL                          0x0014
+#define pllPLL_PWRMGT_CNTL                          0x0015
+#define pllCG_TEST_MACRO_RW_WRITE                   0x0016
+#define pllCG_TEST_MACRO_RW_READ                    0x0017
+#define pllCG_TEST_MACRO_RW_DATA                    0x0018
+#define pllCG_TEST_MACRO_RW_CNTL                    0x0019
+#define pllDISP_TEST_MACRO_RW_WRITE                 0x001A
+#define pllDISP_TEST_MACRO_RW_READ                  0x001B
+#define pllDISP_TEST_MACRO_RW_DATA                  0x001C
+#define pllDISP_TEST_MACRO_RW_CNTL                  0x001D
+#define pllSCLK_CNTL2                               0x001E
+#define pllMCLK_MISC                                0x001F
+#define pllTV_PLL_FINE_CNTL                         0x0020
+#define pllTV_PLL_CNTL                              0x0021
+#define pllTV_PLL_CNTL1                             0x0022
+#define pllTV_DTO_INCREMENTS                        0x0023
+#define pllSPLL_AUX_CNTL                            0x0024
+#define pllMPLL_AUX_CNTL                            0x0025
+#define pllP2PLL_CNTL                               0x002A
+#define pllP2PLL_REF_DIV                            0x002B
+#define pllP2PLL_DIV_0                              0x002C
+#define pllPIXCLKS_CNTL                             0x002D
+#define pllHTOTAL2_CNTL                             0x002E
+#define pllSSPLL_CNTL                               0x0030
+#define pllSSPLL_REF_DIV                            0x0031
+#define pllSSPLL_DIV_0                              0x0032
+#define pllSS_INT_CNTL                              0x0033
+#define pllSS_TST_CNTL                              0x0034
+#define pllSCLK_MORE_CNTL                           0x0035
+
+#define ixMC_PERF_CNTL                             0x0000
+#define ixMC_PERF_SEL                              0x0001
+#define ixMC_PERF_REGION_0                         0x0002
+#define ixMC_PERF_REGION_1                         0x0003
+#define ixMC_PERF_COUNT_0                          0x0004
+#define ixMC_PERF_COUNT_1                          0x0005
+#define ixMC_PERF_COUNT_2                          0x0006
+#define ixMC_PERF_COUNT_3                          0x0007
+#define ixMC_PERF_COUNT_MEMCH_A                    0x0008
+#define ixMC_PERF_COUNT_MEMCH_B                    0x0009
+#define ixMC_IMP_CNTL                              0x000A
+#define ixMC_CHP_IO_CNTL_A0                        0x000B
+#define ixMC_CHP_IO_CNTL_A1                        0x000C
+#define ixMC_CHP_IO_CNTL_B0                        0x000D
+#define ixMC_CHP_IO_CNTL_B1                        0x000E
+#define ixMC_IMP_CNTL_0                            0x000F
+#define ixTC_MISMATCH_1                            0x0010
+#define ixTC_MISMATCH_2                            0x0011
+#define ixMC_BIST_CTRL                             0x0012
+#define ixREG_COLLAR_WRITE                         0x0013
+#define ixREG_COLLAR_READ                          0x0014
+#define ixR300_MC_IMP_CNTL                         0x0018
+#define ixR300_MC_CHP_IO_CNTL_A0                   0x0019
+#define ixR300_MC_CHP_IO_CNTL_A1                   0x001a
+#define ixR300_MC_CHP_IO_CNTL_B0                   0x001b
+#define ixR300_MC_CHP_IO_CNTL_B1                   0x001c
+#define ixR300_MC_CHP_IO_CNTL_C0                   0x001d
+#define ixR300_MC_CHP_IO_CNTL_C1                   0x001e
+#define ixR300_MC_CHP_IO_CNTL_D0                   0x001f
+#define ixR300_MC_CHP_IO_CNTL_D1                   0x0020
+#define ixR300_MC_IMP_CNTL_0                       0x0021
+#define ixR300_MC_ELPIDA_CNTL                      0x0022
+#define ixR300_MC_CHP_IO_OE_CNTL_CD                0x0023
+#define ixR300_MC_READ_CNTL_CD                     0x0024
+#define ixR300_MC_MC_INIT_WR_LAT_TIMER             0x0025
+#define ixR300_MC_DEBUG_CNTL                       0x0026
+#define ixR300_MC_BIST_CNTL_0                      0x0028
+#define ixR300_MC_BIST_CNTL_1                      0x0029
+#define ixR300_MC_BIST_CNTL_2                      0x002a
+#define ixR300_MC_BIST_CNTL_3                      0x002b
+#define ixR300_MC_BIST_CNTL_4                      0x002c
+#define ixR300_MC_BIST_CNTL_5                      0x002d
+#define ixR300_MC_IMP_STATUS                       0x002e
+#define ixR300_MC_DLL_CNTL                         0x002f
+#define NB_TOM                                     0x15C
+
+
+#endif	/* _RADEON_H */
+
diff --git a/include/video/s1d13xxxfb.h b/include/video/s1d13xxxfb.h
new file mode 100644
index 00000000..55f53449
--- /dev/null
+++ b/include/video/s1d13xxxfb.h
@@ -0,0 +1,174 @@
+/* include/video/s1d13xxxfb.h
+ *
+ * (c) 2004 Simtec Electronics
+ * (c) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ *
+ * Header file for Epson S1D13XXX driver code
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef	S1D13XXXFB_H
+#define	S1D13XXXFB_H
+
+#define S1D_PALETTE_SIZE		256
+#define S1D_FBID			"S1D13xxx"
+#define S1D_DEVICENAME			"s1d13xxxfb"
+
+/* S1DREG_REV_CODE register = prod_id (6 bits) + revision (2 bits) */
+#define S1D13505_PROD_ID		0x3	/* 000011 */
+#define S1D13506_PROD_ID		0x4	/* 000100 */
+#define S1D13806_PROD_ID		0x7	/* 000111 */
+
+/* register definitions (tested on s1d13896) */
+#define S1DREG_REV_CODE			0x0000	/* Prod + Rev Code Register */
+#define S1DREG_MISC			0x0001	/* Miscellaneous Register */
+#define S1DREG_GPIO_CNF0		0x0004	/* General IO Pins Configuration Register 0 */
+#define S1DREG_GPIO_CNF1		0x0005	/* General IO Pins Configuration Register 1 */
+#define S1DREG_GPIO_CTL0		0x0008	/* General IO Pins Control Register 0 */
+#define S1DREG_GPIO_CTL1		0x0009	/* General IO Pins Control Register 1 */
+#define S1DREG_CNF_STATUS		0x000C	/* Configuration Status Readback Register */
+#define S1DREG_CLK_CNF			0x0010	/* Memory Clock Configuration Register */
+#define S1DREG_LCD_CLK_CNF		0x0014	/* LCD Pixel Clock Configuration Register */
+#define S1DREG_CRT_CLK_CNF		0x0018	/* CRT/TV Pixel Clock Configuration Register */
+#define S1DREG_MPLUG_CLK_CNF		0x001C	/* MediaPlug Clock Configuration Register */
+#define S1DREG_CPU2MEM_WST_SEL		0x001E	/* CPU To Memory Wait State Select Register */
+#define S1DREG_MEM_CNF			0x0020	/* Memory Configuration Register */
+#define S1DREG_SDRAM_REF_RATE		0x0021	/* SDRAM Refresh Rate Register */
+#define S1DREG_SDRAM_TC0		0x002A	/* SDRAM Timing Control Register 0 */
+#define S1DREG_SDRAM_TC1		0x002B	/* SDRAM Timing Control Register 1 */
+#define S1DREG_PANEL_TYPE		0x0030	/* Panel Type Register */
+#define S1DREG_MOD_RATE			0x0031	/* MOD Rate Register */
+#define S1DREG_LCD_DISP_HWIDTH		0x0032	/* LCD Horizontal Display Width Register: ((val)+1)*8)=pix/line */
+#define S1DREG_LCD_NDISP_HPER		0x0034	/* LCD Horizontal Non-Display Period Register: ((val)+1)*8)=NDpix/line */
+#define S1DREG_TFT_FPLINE_START		0x0035	/* TFT FPLINE Start Position Register */
+#define S1DREG_TFT_FPLINE_PWIDTH	0x0036	/* TFT FPLINE Pulse Width Register. */
+#define S1DREG_LCD_DISP_VHEIGHT0	0x0038	/* LCD Vertical Display Height Register 0 */
+#define S1DREG_LCD_DISP_VHEIGHT1	0x0039	/* LCD Vertical Display Height Register 1 */
+#define S1DREG_LCD_NDISP_VPER		0x003A	/* LCD Vertical Non-Display Period Register: (val)+1=NDlines */
+#define S1DREG_TFT_FPFRAME_START	0x003B	/* TFT FPFRAME Start Position Register */
+#define S1DREG_TFT_FPFRAME_PWIDTH	0x003C	/* TFT FPFRAME Pulse Width Register */
+#define S1DREG_LCD_DISP_MODE		0x0040	/* LCD Display Mode Register */
+#define S1DREG_LCD_MISC			0x0041	/* LCD Miscellaneous Register */
+#define S1DREG_LCD_DISP_START0		0x0042	/* LCD Display Start Address Register 0 */
+#define S1DREG_LCD_DISP_START1		0x0043	/* LCD Display Start Address Register 1 */
+#define S1DREG_LCD_DISP_START2		0x0044	/* LCD Display Start Address Register 2 */
+#define S1DREG_LCD_MEM_OFF0		0x0046	/* LCD Memory Address Offset Register 0 */
+#define S1DREG_LCD_MEM_OFF1		0x0047	/* LCD Memory Address Offset Register 1 */
+#define S1DREG_LCD_PIX_PAN		0x0048	/* LCD Pixel Panning Register */
+#define S1DREG_LCD_DISP_FIFO_HTC	0x004A	/* LCD Display FIFO High Threshold Control Register */
+#define S1DREG_LCD_DISP_FIFO_LTC	0x004B	/* LCD Display FIFO Low Threshold Control Register */
+#define S1DREG_CRT_DISP_HWIDTH		0x0050	/* CRT/TV Horizontal Display Width Register: ((val)+1)*8)=pix/line */
+#define S1DREG_CRT_NDISP_HPER		0x0052	/* CRT/TV Horizontal Non-Display Period Register */
+#define S1DREG_CRT_HRTC_START		0x0053	/* CRT/TV HRTC Start Position Register */
+#define S1DREG_CRT_HRTC_PWIDTH		0x0054	/* CRT/TV HRTC Pulse Width Register */
+#define S1DREG_CRT_DISP_VHEIGHT0	0x0056	/* CRT/TV Vertical Display Height Register 0 */
+#define S1DREG_CRT_DISP_VHEIGHT1	0x0057	/* CRT/TV Vertical Display Height Register 1 */
+#define S1DREG_CRT_NDISP_VPER		0x0058	/* CRT/TV Vertical Non-Display Period Register */
+#define S1DREG_CRT_VRTC_START		0x0059	/* CRT/TV VRTC Start Position Register */
+#define S1DREG_CRT_VRTC_PWIDTH		0x005A	/* CRT/TV VRTC Pulse Width Register */
+#define S1DREG_TV_OUT_CTL		0x005B	/* TV Output Control Register */
+#define S1DREG_CRT_DISP_MODE		0x0060	/* CRT/TV Display Mode Register */
+#define S1DREG_CRT_DISP_START0		0x0062	/* CRT/TV Display Start Address Register 0 */
+#define S1DREG_CRT_DISP_START1		0x0063	/* CRT/TV Display Start Address Register 1 */
+#define S1DREG_CRT_DISP_START2		0x0064	/* CRT/TV Display Start Address Register 2 */
+#define S1DREG_CRT_MEM_OFF0		0x0066	/* CRT/TV Memory Address Offset Register 0 */
+#define S1DREG_CRT_MEM_OFF1		0x0067	/* CRT/TV Memory Address Offset Register 1 */
+#define S1DREG_CRT_PIX_PAN		0x0068	/* CRT/TV Pixel Panning Register */
+#define S1DREG_CRT_DISP_FIFO_HTC	0x006A	/* CRT/TV Display FIFO High Threshold Control Register */
+#define S1DREG_CRT_DISP_FIFO_LTC	0x006B	/* CRT/TV Display FIFO Low Threshold Control Register */
+#define S1DREG_LCD_CUR_CTL		0x0070	/* LCD Ink/Cursor Control Register */
+#define S1DREG_LCD_CUR_START		0x0071	/* LCD Ink/Cursor Start Address Register */
+#define S1DREG_LCD_CUR_XPOS0		0x0072	/* LCD Cursor X Position Register 0 */
+#define S1DREG_LCD_CUR_XPOS1		0x0073	/* LCD Cursor X Position Register 1 */
+#define S1DREG_LCD_CUR_YPOS0		0x0074	/* LCD Cursor Y Position Register 0 */
+#define S1DREG_LCD_CUR_YPOS1		0x0075	/* LCD Cursor Y Position Register 1 */
+#define S1DREG_LCD_CUR_BCTL0		0x0076	/* LCD Ink/Cursor Blue Color 0 Register */
+#define S1DREG_LCD_CUR_GCTL0		0x0077	/* LCD Ink/Cursor Green Color 0 Register */
+#define S1DREG_LCD_CUR_RCTL0		0x0078	/* LCD Ink/Cursor Red Color 0 Register */
+#define S1DREG_LCD_CUR_BCTL1		0x007A	/* LCD Ink/Cursor Blue Color 1 Register */
+#define S1DREG_LCD_CUR_GCTL1		0x007B	/* LCD Ink/Cursor Green Color 1 Register */
+#define S1DREG_LCD_CUR_RCTL1		0x007C	/* LCD Ink/Cursor Red Color 1 Register */
+#define S1DREG_LCD_CUR_FIFO_HTC		0x007E	/* LCD Ink/Cursor FIFO High Threshold Register */
+#define S1DREG_CRT_CUR_CTL		0x0080	/* CRT/TV Ink/Cursor Control Register */
+#define S1DREG_CRT_CUR_START		0x0081	/* CRT/TV Ink/Cursor Start Address Register */
+#define S1DREG_CRT_CUR_XPOS0		0x0082	/* CRT/TV Cursor X Position Register 0 */
+#define S1DREG_CRT_CUR_XPOS1		0x0083	/* CRT/TV Cursor X Position Register 1 */
+#define S1DREG_CRT_CUR_YPOS0		0x0084	/* CRT/TV Cursor Y Position Register 0 */
+#define S1DREG_CRT_CUR_YPOS1		0x0085	/* CRT/TV Cursor Y Position Register 1 */
+#define S1DREG_CRT_CUR_BCTL0		0x0086	/* CRT/TV Ink/Cursor Blue Color 0 Register */
+#define S1DREG_CRT_CUR_GCTL0		0x0087	/* CRT/TV Ink/Cursor Green Color 0 Register */
+#define S1DREG_CRT_CUR_RCTL0		0x0088	/* CRT/TV Ink/Cursor Red Color 0 Register */
+#define S1DREG_CRT_CUR_BCTL1		0x008A	/* CRT/TV Ink/Cursor Blue Color 1 Register */
+#define S1DREG_CRT_CUR_GCTL1		0x008B	/* CRT/TV Ink/Cursor Green Color 1 Register */
+#define S1DREG_CRT_CUR_RCTL1		0x008C	/* CRT/TV Ink/Cursor Red Color 1 Register */
+#define S1DREG_CRT_CUR_FIFO_HTC		0x008E	/* CRT/TV Ink/Cursor FIFO High Threshold Register */
+#define S1DREG_BBLT_CTL0		0x0100	/* BitBLT Control Register 0 */
+#define S1DREG_BBLT_CTL1		0x0101	/* BitBLT Control Register 1 */
+#define S1DREG_BBLT_CC_EXP		0x0102	/* BitBLT Code/Color Expansion Register */
+#define S1DREG_BBLT_OP			0x0103	/* BitBLT Operation Register */
+#define S1DREG_BBLT_SRC_START0		0x0104	/* BitBLT Source Start Address Register 0 */
+#define S1DREG_BBLT_SRC_START1		0x0105	/* BitBLT Source Start Address Register 1 */
+#define S1DREG_BBLT_SRC_START2		0x0106	/* BitBLT Source Start Address Register 2 */
+#define S1DREG_BBLT_DST_START0		0x0108	/* BitBLT Destination Start Address Register 0 */
+#define S1DREG_BBLT_DST_START1		0x0109	/* BitBLT Destination Start Address Register 1 */
+#define S1DREG_BBLT_DST_START2		0x010A	/* BitBLT Destination Start Address Register 2 */
+#define S1DREG_BBLT_MEM_OFF0		0x010C	/* BitBLT Memory Address Offset Register 0 */
+#define S1DREG_BBLT_MEM_OFF1		0x010D	/* BitBLT Memory Address Offset Register 1 */
+#define S1DREG_BBLT_WIDTH0		0x0110	/* BitBLT Width Register 0 */
+#define S1DREG_BBLT_WIDTH1		0x0111	/* BitBLT Width Register 1 */
+#define S1DREG_BBLT_HEIGHT0		0x0112	/* BitBLT Height Register 0 */
+#define S1DREG_BBLT_HEIGHT1		0x0113	/* BitBLT Height Register 1 */
+#define S1DREG_BBLT_BGC0		0x0114	/* BitBLT Background Color Register 0 */
+#define S1DREG_BBLT_BGC1		0x0115	/* BitBLT Background Color Register 1 */
+#define S1DREG_BBLT_FGC0		0x0118	/* BitBLT Foreground Color Register 0 */
+#define S1DREG_BBLT_FGC1		0x0119	/* BitBLT Foreground Color Register 1 */
+#define S1DREG_LKUP_MODE		0x01E0	/* Look-Up Table Mode Register */
+#define S1DREG_LKUP_ADDR		0x01E2	/* Look-Up Table Address Register */
+#define S1DREG_LKUP_DATA		0x01E4	/* Look-Up Table Data Register */
+#define S1DREG_PS_CNF			0x01F0	/* Power Save Configuration Register */
+#define S1DREG_PS_STATUS		0x01F1	/* Power Save Status Register */
+#define S1DREG_CPU2MEM_WDOGT		0x01F4	/* CPU-to-Memory Access Watchdog Timer Register */
+#define S1DREG_COM_DISP_MODE		0x01FC	/* Common Display Mode Register */
+
+#define S1DREG_DELAYOFF			0xFFFE
+#define S1DREG_DELAYON			0xFFFF
+
+#define BBLT_SOLID_FILL			0x0c
+
+
+/* Note: all above defines should go in separate header files
+   when implementing other S1D13xxx chip support. */
+
+struct s1d13xxxfb_regval {
+	u16	addr;
+	u8	value;
+};
+
+struct s1d13xxxfb_par {
+	void __iomem	*regs;
+	unsigned char	display;
+	unsigned char	prod_id;
+	unsigned char	revision;
+
+	unsigned int	pseudo_palette[16];
+#ifdef CONFIG_PM
+	void		*regs_save;	/* pm saves all registers here */
+	void		*disp_save;	/* pm saves entire screen here */
+#endif
+};
+
+struct s1d13xxxfb_pdata {
+	const struct s1d13xxxfb_regval	*initregs;
+	const unsigned int		initregssize;
+	void				(*platform_init_video)(void);
+#ifdef CONFIG_PM
+	int				(*platform_suspend_video)(void);
+	int				(*platform_resume_video)(void);
+#endif
+};
+
+#endif
+
diff --git a/include/video/sa1100fb.h b/include/video/sa1100fb.h
new file mode 100644
index 00000000..4ab40965
--- /dev/null
+++ b/include/video/sa1100fb.h
@@ -0,0 +1,63 @@
+/*
+ * StrongARM 1100 LCD Controller Frame Buffer Device
+ *
+ * Copyright (C) 1999 Eric A. Thomas
+ *  Based on acornfb.c Copyright (C) Russell King.
+ *  
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+#ifndef _VIDEO_SA1100FB_H
+#define _VIDEO_SA1100FB_H
+
+#include <linux/fb.h>
+#include <linux/types.h>
+
+#define RGB_4	0
+#define RGB_8	1
+#define RGB_16	2
+#define NR_RGB	3
+
+/* These are the bitfields for each display depth that we support. */
+struct sa1100fb_rgb {
+	struct fb_bitfield	red;
+	struct fb_bitfield	green;
+	struct fb_bitfield	blue;
+	struct fb_bitfield	transp;
+};
+
+/* This structure describes the machine which we are running on. */
+struct sa1100fb_mach_info {
+	u_long		pixclock;
+
+	u_short		xres;
+	u_short		yres;
+
+	u_char		bpp;
+	u_char		hsync_len;
+	u_char		left_margin;
+	u_char		right_margin;
+
+	u_char		vsync_len;
+	u_char		upper_margin;
+	u_char		lower_margin;
+	u_char		sync;
+
+	u_int		cmap_greyscale:1,
+			cmap_inverse:1,
+			cmap_static:1,
+			unused:29;
+
+	u_int		lccr0;
+	u_int		lccr3;
+
+	/* Overrides for the default RGB maps */
+	const struct sa1100fb_rgb *rgb[NR_RGB];
+
+	void (*backlight_power)(int);
+	void (*lcd_power)(int);
+	void (*set_visual)(u32);
+};
+
+#endif
diff --git a/include/video/sgivw.h b/include/video/sgivw.h
new file mode 100644
index 00000000..f6aa5692
--- /dev/null
+++ b/include/video/sgivw.h
@@ -0,0 +1,681 @@
+/*
+ *  linux/drivers/video/sgivw.h -- SGI DBE frame buffer device header
+ *
+ *      Copyright (C) 1999 Silicon Graphics, Inc.
+ *      Jeffrey Newquist, newquist@engr.sgi.som
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+#ifndef __SGIVWFB_H__
+#define __SGIVWFB_H__
+
+#define DBE_GETREG(reg, dest)		((dest) = DBE_REG_BASE->reg)
+#define DBE_SETREG(reg, src)		DBE_REG_BASE->reg = (src)
+#define DBE_IGETREG(reg, idx, dest)	((dest) = DBE_REG_BASE->reg[idx])
+#define DBE_ISETREG(reg, idx, src)	(DBE_REG_BASE->reg[idx] = (src))
+
+#define MASK(msb, lsb)          ( (((u32)1<<((msb)-(lsb)+1))-1) << (lsb) )
+#define GET(v, msb, lsb)        ( ((u32)(v) & MASK(msb,lsb)) >> (lsb) )
+#define SET(v, f, msb, lsb)     ( (v) = ((v)&~MASK(msb,lsb)) | (( (u32)(f)<<(lsb) ) & MASK(msb,lsb)) )
+
+#define GET_DBE_FIELD(reg, field, v)        GET((v), DBE_##reg##_##field##_MSB, DBE_##reg##_##field##_LSB)
+#define SET_DBE_FIELD(reg, field, v, f)     SET((v), (f), DBE_##reg##_##field##_MSB, DBE_##reg##_##field##_LSB)
+
+/* NOTE: All loads/stores must be 32 bits and uncached */
+
+#define DBE_REG_PHYS	0xd0000000
+#define DBE_REG_SIZE        0x01000000
+
+struct asregs {
+  volatile u32 ctrlstat;     /* 0x000000 general control */
+  volatile u32 dotclock;     /* 0x000004 dot clock PLL control */
+  volatile u32 i2c;          /* 0x000008 crt I2C control */
+  volatile u32 sysclk;       /* 0x00000c system clock PLL control */
+  volatile u32 i2cfp;        /* 0x000010 flat panel I2C control */
+  volatile u32 id;           /* 0x000014 device id/chip revision */
+  volatile u32 config;       /* 0x000018 power on configuration */
+  volatile u32 bist;         /* 0x00001c internal bist status */
+
+  char _pad0[ 0x010000 - 0x000020 ];
+
+  volatile u32 vt_xy;        /* 0x010000 current dot coords */
+  volatile u32 vt_xymax;     /* 0x010004 maximum dot coords */
+  volatile u32 vt_vsync;     /* 0x010008 vsync on/off */
+  volatile u32 vt_hsync;     /* 0x01000c hsync on/off */
+  volatile u32 vt_vblank;    /* 0x010010 vblank on/off */
+  volatile u32 vt_hblank;    /* 0x010014 hblank on/off */
+  volatile u32 vt_flags;     /* 0x010018 polarity of vt signals */
+  volatile u32 vt_f2rf_lock; /* 0x01001c f2rf & framelck y coord */
+  volatile u32 vt_intr01;    /* 0x010020 intr 0,1 y coords */
+  volatile u32 vt_intr23;    /* 0x010024 intr 2,3 y coords */
+  volatile u32 fp_hdrv;      /* 0x010028 flat panel hdrv on/off */
+  volatile u32 fp_vdrv;      /* 0x01002c flat panel vdrv on/off */
+  volatile u32 fp_de;        /* 0x010030 flat panel de on/off */
+  volatile u32 vt_hpixen;    /* 0x010034 intrnl horiz pixel on/off*/
+  volatile u32 vt_vpixen;    /* 0x010038 intrnl vert pixel on/off */
+  volatile u32 vt_hcmap;     /* 0x01003c cmap write (horiz) */
+  volatile u32 vt_vcmap;     /* 0x010040 cmap write (vert) */
+  volatile u32 did_start_xy; /* 0x010044 eol/f did/xy reset val */
+  volatile u32 crs_start_xy; /* 0x010048 eol/f crs/xy reset val */
+  volatile u32 vc_start_xy;  /* 0x01004c eol/f vc/xy reset val */
+
+  char _pad1[ 0x020000 - 0x010050 ];
+
+  volatile u32 ovr_width_tile; /* 0x020000 overlay plane ctrl 0 */
+  volatile u32 ovr_inhwctrl;   /* 0x020004 overlay plane ctrl 1 */
+  volatile u32 ovr_control;    /* 0x020008 overlay plane ctrl 1 */
+
+  char _pad2[ 0x030000 - 0x02000C ];
+
+  volatile u32 frm_size_tile;  /* 0x030000 normal plane ctrl 0 */
+  volatile u32 frm_size_pixel; /* 0x030004 normal plane ctrl 1 */
+  volatile u32 frm_inhwctrl;   /* 0x030008 normal plane ctrl 2 */
+  volatile u32 frm_control;	   /* 0x03000C normal plane ctrl 3 */
+
+  char _pad3[ 0x040000 - 0x030010 ];
+
+  volatile u32 did_inhwctrl;   /* 0x040000 DID control */
+  volatile u32 did_control;    /* 0x040004 DID shadow */
+
+  char _pad4[ 0x048000 - 0x040008 ];
+
+  volatile u32 mode_regs[32];  /* 0x048000 - 0x04807c WID table */
+
+  char _pad5[ 0x050000 - 0x048080 ];
+
+  volatile u32 cmap[6144];     /* 0x050000 - 0x055ffc color map */
+
+  char _pad6[ 0x058000 - 0x056000 ];
+
+  volatile u32 cm_fifo;        /* 0x058000 color map fifo status */
+
+  char _pad7[ 0x060000 - 0x058004 ];
+
+  volatile u32 gmap[256];      /* 0x060000 - 0x0603fc gamma map */
+
+  char _pad8[ 0x068000 - 0x060400 ];
+
+  volatile u32 gmap10[1024];   /* 0x068000 - 0x068ffc gamma map */
+
+  char _pad9[ 0x070000 - 0x069000 ];
+
+  volatile u32 crs_pos;        /* 0x070000 cusror control 0 */
+  volatile u32 crs_ctl;        /* 0x070004 cusror control 1 */
+  volatile u32 crs_cmap[3];    /* 0x070008 - 0x070010 crs cmap */
+
+  char _pad10[ 0x078000 - 0x070014 ];
+
+  volatile u32 crs_glyph[64];  /* 0x078000 - 0x0780fc crs glyph */
+
+  char _pad11[ 0x080000 - 0x078100 ];
+
+  volatile u32 vc_0;           /* 0x080000 video capture crtl 0 */
+  volatile u32 vc_1;           /* 0x080004 video capture crtl 1 */
+  volatile u32 vc_2;           /* 0x080008 video capture crtl 2 */
+  volatile u32 vc_3;           /* 0x08000c video capture crtl 3 */
+  volatile u32 vc_4;           /* 0x080010 video capture crtl 3 */
+  volatile u32 vc_5;           /* 0x080014 video capture crtl 3 */
+  volatile u32 vc_6;           /* 0x080018 video capture crtl 3 */
+  volatile u32 vc_7;           /* 0x08001c video capture crtl 3 */
+  volatile u32 vc_8;           /* 0x08000c video capture crtl 3 */
+};
+
+/* Bit mask information */
+
+#define DBE_CTRLSTAT_CHIPID_MSB     3
+#define DBE_CTRLSTAT_CHIPID_LSB     0
+#define DBE_CTRLSTAT_SENSE_N_MSB    4
+#define DBE_CTRLSTAT_SENSE_N_LSB    4
+#define DBE_CTRLSTAT_PCLKSEL_MSB    29
+#define DBE_CTRLSTAT_PCLKSEL_LSB    28
+
+#define DBE_DOTCLK_M_MSB            7
+#define DBE_DOTCLK_M_LSB            0
+#define DBE_DOTCLK_N_MSB            13
+#define DBE_DOTCLK_N_LSB            8
+#define DBE_DOTCLK_P_MSB            15
+#define DBE_DOTCLK_P_LSB            14
+#define DBE_DOTCLK_RUN_MSB          20
+#define DBE_DOTCLK_RUN_LSB          20
+
+#define DBE_VT_XY_VT_FREEZE_MSB     31
+#define DBE_VT_XY_VT_FREEZE_LSB     31
+
+#define DBE_FP_VDRV_FP_VDRV_ON_MSB	23
+#define DBE_FP_VDRV_FP_VDRV_ON_LSB	12
+#define DBE_FP_VDRV_FP_VDRV_OFF_MSB	11
+#define DBE_FP_VDRV_FP_VDRV_OFF_LSB	0
+
+#define DBE_FP_HDRV_FP_HDRV_ON_MSB	23
+#define DBE_FP_HDRV_FP_HDRV_ON_LSB	12
+#define DBE_FP_HDRV_FP_HDRV_OFF_MSB	11
+#define DBE_FP_HDRV_FP_HDRV_OFF_LSB	0
+
+#define DBE_FP_DE_FP_DE_ON_MSB		23
+#define DBE_FP_DE_FP_DE_ON_LSB		12
+#define DBE_FP_DE_FP_DE_OFF_MSB		11
+#define DBE_FP_DE_FP_DE_OFF_LSB		0
+
+#define DBE_VT_VSYNC_VT_VSYNC_ON_MSB        23
+#define DBE_VT_VSYNC_VT_VSYNC_ON_LSB        12
+#define DBE_VT_VSYNC_VT_VSYNC_OFF_MSB       11
+#define DBE_VT_VSYNC_VT_VSYNC_OFF_LSB       0
+
+#define DBE_VT_HSYNC_VT_HSYNC_ON_MSB        23
+#define DBE_VT_HSYNC_VT_HSYNC_ON_LSB        12
+#define DBE_VT_HSYNC_VT_HSYNC_OFF_MSB       11
+#define DBE_VT_HSYNC_VT_HSYNC_OFF_LSB       0
+
+#define DBE_VT_VBLANK_VT_VBLANK_ON_MSB        23
+#define DBE_VT_VBLANK_VT_VBLANK_ON_LSB        12
+#define DBE_VT_VBLANK_VT_VBLANK_OFF_MSB       11
+#define DBE_VT_VBLANK_VT_VBLANK_OFF_LSB       0
+
+#define DBE_VT_HBLANK_VT_HBLANK_ON_MSB        23
+#define DBE_VT_HBLANK_VT_HBLANK_ON_LSB        12
+#define DBE_VT_HBLANK_VT_HBLANK_OFF_MSB       11
+#define DBE_VT_HBLANK_VT_HBLANK_OFF_LSB       0
+
+#define DBE_VT_FLAGS_VDRV_INVERT_MSB		0
+#define DBE_VT_FLAGS_VDRV_INVERT_LSB		0
+#define DBE_VT_FLAGS_HDRV_INVERT_MSB		2
+#define DBE_VT_FLAGS_HDRV_INVERT_LSB		2
+
+#define DBE_VT_VCMAP_VT_VCMAP_ON_MSB        23
+#define DBE_VT_VCMAP_VT_VCMAP_ON_LSB        12
+#define DBE_VT_VCMAP_VT_VCMAP_OFF_MSB       11
+#define DBE_VT_VCMAP_VT_VCMAP_OFF_LSB       0
+
+#define DBE_VT_HCMAP_VT_HCMAP_ON_MSB        23
+#define DBE_VT_HCMAP_VT_HCMAP_ON_LSB        12
+#define DBE_VT_HCMAP_VT_HCMAP_OFF_MSB       11
+#define DBE_VT_HCMAP_VT_HCMAP_OFF_LSB       0
+
+#define DBE_VT_XYMAX_VT_MAXX_MSB    11
+#define DBE_VT_XYMAX_VT_MAXX_LSB    0
+#define DBE_VT_XYMAX_VT_MAXY_MSB    23
+#define DBE_VT_XYMAX_VT_MAXY_LSB    12
+
+#define DBE_VT_HPIXEN_VT_HPIXEN_ON_MSB      23
+#define DBE_VT_HPIXEN_VT_HPIXEN_ON_LSB      12
+#define DBE_VT_HPIXEN_VT_HPIXEN_OFF_MSB     11
+#define DBE_VT_HPIXEN_VT_HPIXEN_OFF_LSB     0
+
+#define DBE_VT_VPIXEN_VT_VPIXEN_ON_MSB      23
+#define DBE_VT_VPIXEN_VT_VPIXEN_ON_LSB      12
+#define DBE_VT_VPIXEN_VT_VPIXEN_OFF_MSB     11
+#define DBE_VT_VPIXEN_VT_VPIXEN_OFF_LSB     0
+
+#define DBE_OVR_CONTROL_OVR_DMA_ENABLE_MSB  0
+#define DBE_OVR_CONTROL_OVR_DMA_ENABLE_LSB  0
+
+#define DBE_OVR_INHWCTRL_OVR_DMA_ENABLE_MSB 0
+#define DBE_OVR_INHWCTRL_OVR_DMA_ENABLE_LSB 0
+
+#define DBE_OVR_WIDTH_TILE_OVR_FIFO_RESET_MSB       13
+#define DBE_OVR_WIDTH_TILE_OVR_FIFO_RESET_LSB       13
+
+#define DBE_FRM_CONTROL_FRM_DMA_ENABLE_MSB  0
+#define DBE_FRM_CONTROL_FRM_DMA_ENABLE_LSB  0
+#define DBE_FRM_CONTROL_FRM_TILE_PTR_MSB    31
+#define DBE_FRM_CONTROL_FRM_TILE_PTR_LSB    9
+#define DBE_FRM_CONTROL_FRM_LINEAR_MSB      1
+#define DBE_FRM_CONTROL_FRM_LINEAR_LSB      1
+
+#define DBE_FRM_INHWCTRL_FRM_DMA_ENABLE_MSB 0
+#define DBE_FRM_INHWCTRL_FRM_DMA_ENABLE_LSB 0
+
+#define DBE_FRM_SIZE_TILE_FRM_WIDTH_TILE_MSB        12
+#define DBE_FRM_SIZE_TILE_FRM_WIDTH_TILE_LSB        5
+#define DBE_FRM_SIZE_TILE_FRM_RHS_MSB       4
+#define DBE_FRM_SIZE_TILE_FRM_RHS_LSB       0
+#define DBE_FRM_SIZE_TILE_FRM_DEPTH_MSB     14
+#define DBE_FRM_SIZE_TILE_FRM_DEPTH_LSB     13
+#define DBE_FRM_SIZE_TILE_FRM_FIFO_RESET_MSB        15
+#define DBE_FRM_SIZE_TILE_FRM_FIFO_RESET_LSB        15
+
+#define DBE_FRM_SIZE_PIXEL_FB_HEIGHT_PIX_MSB        31
+#define DBE_FRM_SIZE_PIXEL_FB_HEIGHT_PIX_LSB        16
+
+#define DBE_DID_CONTROL_DID_DMA_ENABLE_MSB  0
+#define DBE_DID_CONTROL_DID_DMA_ENABLE_LSB  0
+#define DBE_DID_INHWCTRL_DID_DMA_ENABLE_MSB 0
+#define DBE_DID_INHWCTRL_DID_DMA_ENABLE_LSB 0
+
+#define DBE_DID_START_XY_DID_STARTY_MSB     23
+#define DBE_DID_START_XY_DID_STARTY_LSB     12
+#define DBE_DID_START_XY_DID_STARTX_MSB     11
+#define DBE_DID_START_XY_DID_STARTX_LSB     0
+
+#define DBE_CRS_START_XY_CRS_STARTY_MSB     23
+#define DBE_CRS_START_XY_CRS_STARTY_LSB     12
+#define DBE_CRS_START_XY_CRS_STARTX_MSB     11
+#define DBE_CRS_START_XY_CRS_STARTX_LSB     0
+
+#define DBE_WID_TYP_MSB     4
+#define DBE_WID_TYP_LSB     2
+#define DBE_WID_BUF_MSB     1
+#define DBE_WID_BUF_LSB     0
+
+#define DBE_VC_START_XY_VC_STARTY_MSB       23
+#define DBE_VC_START_XY_VC_STARTY_LSB       12
+#define DBE_VC_START_XY_VC_STARTX_MSB       11
+#define DBE_VC_START_XY_VC_STARTX_LSB       0
+
+/* Constants */
+
+#define DBE_FRM_DEPTH_8     0
+#define DBE_FRM_DEPTH_16    1
+#define DBE_FRM_DEPTH_32    2
+
+#define DBE_CMODE_I8        0
+#define DBE_CMODE_I12       1
+#define DBE_CMODE_RG3B2     2
+#define DBE_CMODE_RGB4      3
+#define DBE_CMODE_ARGB5     4
+#define DBE_CMODE_RGB8      5
+#define DBE_CMODE_RGBA5     6
+#define DBE_CMODE_RGB10     7
+
+#define DBE_BMODE_BOTH      3
+
+#define DBE_CRS_MAGIC       54
+
+#define DBE_CLOCK_REF_KHZ	27000
+
+/* Config Register (DBE Only) Definitions */
+
+#define DBE_CONFIG_VDAC_ENABLE       0x00000001
+#define DBE_CONFIG_VDAC_GSYNC        0x00000002
+#define DBE_CONFIG_VDAC_PBLANK       0x00000004
+#define DBE_CONFIG_FPENABLE          0x00000008
+#define DBE_CONFIG_LENDIAN           0x00000020
+#define DBE_CONFIG_TILEHIST          0x00000040
+#define DBE_CONFIG_EXT_ADDR          0x00000080
+
+#define DBE_CONFIG_FBDEV        ( DBE_CONFIG_VDAC_ENABLE | \
+                                      DBE_CONFIG_VDAC_GSYNC  | \
+                                      DBE_CONFIG_VDAC_PBLANK | \
+                                      DBE_CONFIG_LENDIAN     | \
+                                      DBE_CONFIG_EXT_ADDR )
+
+/*
+ * Available Video Timings and Corresponding Indices
+ */
+
+typedef enum {
+  DBE_VT_640_480_60,
+
+  DBE_VT_800_600_60,
+  DBE_VT_800_600_75,
+  DBE_VT_800_600_120,
+
+  DBE_VT_1024_768_50,
+  DBE_VT_1024_768_60,
+  DBE_VT_1024_768_75,
+  DBE_VT_1024_768_85,
+  DBE_VT_1024_768_120,
+
+  DBE_VT_1280_1024_50,
+  DBE_VT_1280_1024_60,
+  DBE_VT_1280_1024_75,
+  DBE_VT_1280_1024_85,
+
+  DBE_VT_1600_1024_53,
+  DBE_VT_1600_1024_60,
+
+  DBE_VT_1600_1200_50,
+  DBE_VT_1600_1200_60,
+  DBE_VT_1600_1200_75,
+
+  DBE_VT_1920_1080_50,
+  DBE_VT_1920_1080_60,
+  DBE_VT_1920_1080_72,
+
+  DBE_VT_1920_1200_50,
+  DBE_VT_1920_1200_60,
+  DBE_VT_1920_1200_66,
+
+  DBE_VT_UNKNOWN
+} dbe_timing_t;
+
+
+
+/*
+ * Crime Video Timing Data Structure
+ */
+
+struct dbe_timing_info
+{
+  dbe_timing_t type;
+  int flags;
+  short width;		    /* Monitor resolution		*/
+  short height;
+  int fields_sec;	    /* fields/sec  (Hz -3 dec. places */
+  int cfreq;		    /* pixel clock frequency (MHz -3 dec. places) */
+  short htotal;		    /* Horizontal total pixels	*/
+  short hblank_start;	    /* Horizontal blank start	*/
+  short hblank_end;	    /* Horizontal blank end		*/
+  short hsync_start;	    /* Horizontal sync start	*/
+  short hsync_end;	    /* Horizontal sync end		*/
+  short vtotal;		    /* Vertical total lines		*/
+  short vblank_start;	    /* Vertical blank start		*/
+  short vblank_end;	    /* Vertical blank end		*/
+  short vsync_start;	    /* Vertical sync start		*/
+  short vsync_end;	    /* Vertical sync end		*/
+  short pll_m;		    /* PLL M parameter		*/
+  short pll_n;		    /* PLL P parameter		*/
+  short pll_p;		    /* PLL N parameter		*/
+};
+
+/* Defines for dbe_vof_info_t flags */
+
+#define DBE_VOF_UNKNOWNMON    1
+#define DBE_VOF_STEREO        2
+#define DBE_VOF_DO_GENSYNC    4          /* enable incoming sync */
+#define DBE_VOF_SYNC_ON_GREEN 8          /* sync on green */
+#define DBE_VOF_FLATPANEL     0x1000     /* FLATPANEL Timing */
+#define DBE_VOF_MAGICKEY      0x2000     /* Backdoor key */
+
+/*
+ * DBE Timing Tables
+ */
+
+#ifdef INCLUDE_TIMING_TABLE_DATA
+struct dbe_timing_info dbeVTimings[] = {
+  {
+    DBE_VT_640_480_60,
+    /*	flags,	width,			height,		fields_sec,		cfreq */
+    0,	        640,			480,		59940,			25175,
+    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
+    800,	640,		        800,		656,		752,
+    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
+    525,	480,		        525,		490,		    492,
+    /*	pll_m,	pll_n,			pll_p */
+    15,	    2,				3
+  },
+
+  {
+    DBE_VT_800_600_60,
+    /*	flags,	width,			height,		fields_sec,		cfreq */
+    0,	    800,			600,		60317,			40000,
+    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
+    1056,	800,		    1056,		840,		    968,
+    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
+    628,	600,		    628,		601,		    605,
+    /*	pll_m,	pll_n,			pll_p */
+    3,	    1,				1
+  },
+
+  {
+    DBE_VT_800_600_75,
+    /*	flags,	width,		    height,		fields_sec,	    cfreq */
+    0,	    800,		    600,		75000,		    49500,
+    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
+    1056,	800,		    1056,		816,		    896,
+    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
+    625,	600,		    625,		601,		    604,
+    /*	pll_m,	pll_n,		    pll_p */
+    11,	    3,		        1
+  },
+
+  {
+    DBE_VT_800_600_120,
+    /*	flags,					width,		height,			fields_sec,	    cfreq */
+    DBE_VOF_STEREO,	    800,		600,			119800,		    82978,
+    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
+    1040,	800,		    1040,		856,		    976,
+    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
+    666,	600,		    666,		637,		    643,
+    /*	pll_m,	pll_n,		    pll_p */
+    31,	    5,		        1
+  },
+
+  {
+    DBE_VT_1024_768_50,
+    /*	flags,	width,		    height,		fields_sec,	    cfreq */
+    0,	    1024,		    768,		50000,		    54163,
+    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
+    1344,	1024,		    1344,		1048,		    1184,
+    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
+    806,	768,		    806,		771,		    777,
+    /*	pll_m,	pll_n,		    pll_p */
+    4,	    1,		        1
+  },
+
+  {
+    DBE_VT_1024_768_60,
+    /*	flags,	width,			height,		fields_sec,		cfreq */
+    0,	    1024,			768,		60004,			65000,
+    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
+    1344,	1024,		    1344,		1048,		    1184,
+    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
+    806,	768,		    806,		771,		    777,
+    /*	pll_m,	pll_n,			pll_p */
+    12,	    5,				0
+  },
+
+  {
+    DBE_VT_1024_768_75,
+    /*	flags,	width,			height,		fields_sec,		cfreq */
+    0,	    1024,			768,		75029,			78750,
+    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
+    1312,	1024,		    1312,		1040,		    1136,
+    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
+    800,	768,		    800,		769,		    772,
+    /*	pll_m,	pll_n,			pll_p */
+    29,	    5,				1
+  },
+
+  {
+    DBE_VT_1024_768_85,
+    /*	flags,	width,			height,		fields_sec,		cfreq */
+    0,	    1024,			768,		84997,			94500,
+    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
+    1376,	1024,		    1376,		1072,		    1168,
+    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
+    808,	768,		    808,		769,		    772,
+    /*	pll_m,	pll_n,			pll_p */
+    7,	    2,				0
+  },
+
+  {
+    DBE_VT_1024_768_120,
+    /*	flags,					width,		height,			fields_sec,		cfreq */
+    DBE_VOF_STEREO,	    1024,		768,			119800,			133195,
+    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
+    1376,	1024,		    1376,		1072,		    1168,
+    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
+    808,	768,		    808,		769,		    772,
+    /*	pll_m,	pll_n,			pll_p */
+    5,	    1,				0
+  },
+
+  {
+    DBE_VT_1280_1024_50,
+    /*	flags,	width,			height,		fields_sec,		cfreq */
+    0,	    1280,			1024,		50000,			89460,
+    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
+    1680,	1280,		    1680,		1360,		    1480,
+    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
+    1065,	1024,		    1065,		1027,		    1030,
+    /*	pll_m,	pll_n,			pll_p */
+    10,	    3,				0
+  },
+
+  {
+    DBE_VT_1280_1024_60,
+    /*	flags,	width,			height,		fields_sec,		cfreq */
+    0,	    1280,			1024,		60020,			108000,
+    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
+    1688,	1280,		    1688,		1328,		    1440,
+    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
+    1066,	1024,		    1066,		1025,		    1028,
+    /*	pll_m,	pll_n,			pll_p */
+    4,	    1,			    0
+  },
+
+  {
+    DBE_VT_1280_1024_75,
+    /*	flags,	width,			height,		fields_sec,		cfreq */
+    0,	    1280,			1024,		75025,			135000,
+    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
+    1688,	1280,		    1688,		1296,		    1440,
+    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
+    1066,	1024,		    1066,		1025,		    1028,
+    /*	pll_m,	pll_n,			pll_p */
+    5,	    1,				0
+  },
+
+  {
+    DBE_VT_1280_1024_85,
+    /*	flags,	width,		    height,		fields_sec,	    cfreq */
+    0,	    1280,		    1024,		85024,		    157500,
+    /*	htotal,	hblank_start,	hblank_end,	hsync_start,	hsync_end */
+    1728,	1280,		    1728,		1344,		    1504,
+    /*	vtotal,	vblank_start,	vblank_end,	vsync_start,	vsync_end */
+    1072,	1024,		    1072,		1025,		    1028,
+    /*	pll_m,	pll_n,		    pll_p */
+    29,	    5,		        0
+  },
+
+  {
+    DBE_VT_1600_1024_53,
+    /* flags,	width,			height,		fields_sec,     cfreq */
+    DBE_VOF_FLATPANEL | DBE_VOF_MAGICKEY,
+    1600,			1024,		53000,			107447,
+    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
+    1900,   1600,           1900,           1630,           1730,
+    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
+    1067,   1024,           1067,           1027,           1030,
+    /* pll_m,  pll_n,          pll_p */
+    4,      1,              0
+  },
+
+  {
+    DBE_VT_1600_1024_60,
+    /* flags,					width,          height,			fields_sec,     cfreq */
+    DBE_VOF_FLATPANEL,   1600,           1024,			60000,          106913,
+    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
+    1670,   1600,           1670,           1630,           1650,
+    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
+    1067,   1024,           1067,           1027,           1030,
+    /* pll_m,  pll_n,          pll_p */
+    4,      1,              0
+  },
+
+  {
+    DBE_VT_1600_1200_50,
+    /* flags,  width,          height,         fields_sec,     cfreq */
+    0,      1600,           1200,           50000,          130500,
+    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
+    2088,   1600,           2088,           1644,           1764,
+    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
+    1250,   1200,           1250,           1205,           1211,
+    /* pll_m,  pll_n,          pll_p */
+    24,     5,              0
+  },
+
+  {
+    DBE_VT_1600_1200_60,
+    /* flags,  width,          height,         fields_sec,     cfreq */
+    0,      1600,           1200,           59940,          162000,
+    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
+    2160,   1600,           2160,           1644,           1856,
+    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
+    1250,   1200,           1250,           1201,           1204,
+    /* pll_m,  pll_n,          pll_p */
+    6,		1,              0
+  },
+
+  {
+    DBE_VT_1600_1200_75,
+    /* flags,  width,          height,         fields_sec,     cfreq */
+    0,      1600,           1200,           75000,          202500,
+    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
+    2160,   1600,           2160,           1644,           1856,
+    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
+    1250,   1200,           1250,           1201,           1204,
+    /* pll_m,  pll_n,          pll_p */
+    15,		2,              0
+  },
+
+  {
+    DBE_VT_1920_1080_50,
+    /* flags,  width,          height,         fields_sec,     cfreq */
+    0,      1920,           1080,           50000,          133200,
+    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
+    2368,   1920,           2368,           1952,           2096,
+    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
+    1125,   1080,           1125,           1083,           1086,
+    /* pll_m,  pll_n,          pll_p */
+    5,      1,              0
+  },
+
+  {
+    DBE_VT_1920_1080_60,
+    /* flags,  width,          height,         fields_sec,     cfreq */
+    0,      1920,           1080,           59940,          159840,
+    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
+    2368,   1920,           2368,           1952,           2096,
+    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
+    1125,   1080,           1125,           1083,           1086,
+    /* pll_m,  pll_n,          pll_p */
+    6,      1,              0
+  },
+
+  {
+    DBE_VT_1920_1080_72,
+    /* flags,  width,          height,         fields_sec,     cfreq */
+    0,      1920,           1080,           72000,          216023,
+    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
+    2560,   1920,           2560,           1968,           2184,
+    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
+    1172,   1080,           1172,           1083,           1086,
+    /* pll_m,  pll_n,          pll_p */
+    8,      1,              0
+  },
+
+  {
+    DBE_VT_1920_1200_50,
+    /* flags,  width,          height,         fields_sec,     cfreq */
+    0,      1920,           1200,           50000,          161500,
+    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
+    2584,   1920,           2584,           1984,           2240,
+    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
+    1250,   1200,           1250,           1203,           1206,
+    /* pll_m,  pll_n,          pll_p */
+    6,      1,              0
+  },
+
+  {
+    DBE_VT_1920_1200_60,
+    /* flags,  width,          height,         fields_sec,     cfreq */
+    0,      1920,           1200,           59940,          193800,
+    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
+    2584,   1920,           2584,           1984,           2240,
+    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
+    1250,   1200,           1250,           1203,           1206,
+    /* pll_m,  pll_n,          pll_p */
+    29,     4,              0
+  },
+
+  {
+    DBE_VT_1920_1200_66,
+    /* flags,  width,          height,         fields_sec,     cfreq */
+    0,      1920,           1200,           66000,          213180,
+    /* htotal, hblank_start,   hblank_end,     hsync_start,    hsync_end */
+    2584,   1920,           2584,           1984,           2240,
+    /* vtotal, vblank_start,   vblank_end,     vsync_start,    vsync_end */
+    1250,   1200,           1250,           1203,           1206,
+    /* pll_m,  pll_n,          pll_p */
+    8,      1,              0
+  }
+};
+
+#endif // INCLUDE_TIMING_TABLE_DATA
+
+#endif // ! __SGIVWFB_H__
diff --git a/include/video/sh_mipi_dsi.h b/include/video/sh_mipi_dsi.h
new file mode 100644
index 00000000..06c67fbc
--- /dev/null
+++ b/include/video/sh_mipi_dsi.h
@@ -0,0 +1,61 @@
+/*
+ * Public SH-mobile MIPI DSI header
+ *
+ * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef VIDEO_SH_MIPI_DSI_H
+#define VIDEO_SH_MIPI_DSI_H
+
+enum sh_mipi_dsi_data_fmt {
+	MIPI_RGB888,
+	MIPI_RGB565,
+	MIPI_RGB666_LP,
+	MIPI_RGB666,
+	MIPI_BGR888,
+	MIPI_BGR565,
+	MIPI_BGR666_LP,
+	MIPI_BGR666,
+	MIPI_YUYV,
+	MIPI_UYVY,
+	MIPI_YUV420_L,
+	MIPI_YUV420,
+};
+
+struct sh_mobile_lcdc_chan_cfg;
+
+#define SH_MIPI_DSI_HSABM	(1 << 0)
+#define SH_MIPI_DSI_HBPBM	(1 << 1)
+#define SH_MIPI_DSI_HFPBM	(1 << 2)
+#define SH_MIPI_DSI_BL2E	(1 << 3)
+#define SH_MIPI_DSI_VSEE	(1 << 4)
+#define SH_MIPI_DSI_HSEE	(1 << 5)
+#define SH_MIPI_DSI_HSAE	(1 << 6)
+
+#define SH_MIPI_DSI_HSbyteCLK	(1 << 24)
+#define SH_MIPI_DSI_HS6divCLK	(1 << 25)
+#define SH_MIPI_DSI_HS4divCLK	(1 << 26)
+
+#define SH_MIPI_DSI_SYNC_PULSES_MODE	(SH_MIPI_DSI_VSEE | \
+					 SH_MIPI_DSI_HSEE | \
+					 SH_MIPI_DSI_HSAE)
+#define SH_MIPI_DSI_SYNC_EVENTS_MODE	(0)
+#define SH_MIPI_DSI_SYNC_BURST_MODE	(SH_MIPI_DSI_BL2E)
+
+struct sh_mipi_dsi_info {
+	enum sh_mipi_dsi_data_fmt	data_format;
+	struct sh_mobile_lcdc_chan_cfg	*lcd_chan;
+	int				lane;
+	unsigned long			flags;
+	u32				clksrc;
+	u32				phyctrl; /* for extra setting */
+	unsigned int			vsynw_offset;
+	int	(*set_dot_clock)(struct platform_device *pdev,
+				 void __iomem *base,
+				 int enable);
+};
+
+#endif
diff --git a/include/video/sh_mobile_hdmi.h b/include/video/sh_mobile_hdmi.h
new file mode 100644
index 00000000..728f9de9
--- /dev/null
+++ b/include/video/sh_mobile_hdmi.h
@@ -0,0 +1,39 @@
+/*
+ * SH-Mobile High-Definition Multimedia Interface (HDMI)
+ *
+ * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef SH_MOBILE_HDMI_H
+#define SH_MOBILE_HDMI_H
+
+struct sh_mobile_lcdc_chan_cfg;
+struct device;
+struct clk;
+
+/*
+ * flags format
+ *
+ * 0x0000000A
+ *
+ * A: Audio source select
+ */
+
+/* Audio source select */
+#define HDMI_SND_SRC_MASK	(0xF << 0)
+#define HDMI_SND_SRC_I2S	(0 << 0) /* default */
+#define HDMI_SND_SRC_SPDIF	(1 << 0)
+#define HDMI_SND_SRC_DSD	(2 << 0)
+#define HDMI_SND_SRC_HBR	(3 << 0)
+
+struct sh_mobile_hdmi_info {
+	unsigned int			 flags;
+	long (*clk_optimize_parent)(unsigned long target, unsigned long *best_freq,
+				    unsigned long *parent_freq);
+};
+
+#endif
diff --git a/include/video/sh_mobile_lcdc.h b/include/video/sh_mobile_lcdc.h
new file mode 100644
index 00000000..7571b27a
--- /dev/null
+++ b/include/video/sh_mobile_lcdc.h
@@ -0,0 +1,192 @@
+#ifndef __ASM_SH_MOBILE_LCDC_H__
+#define __ASM_SH_MOBILE_LCDC_H__
+
+#include <linux/fb.h>
+#include <video/sh_mobile_meram.h>
+
+/* Register definitions */
+#define _LDDCKR			0x410
+#define LDDCKR_ICKSEL_BUS	(0 << 16)
+#define LDDCKR_ICKSEL_MIPI	(1 << 16)
+#define LDDCKR_ICKSEL_HDMI	(2 << 16)
+#define LDDCKR_ICKSEL_EXT	(3 << 16)
+#define LDDCKR_ICKSEL_MASK	(7 << 16)
+#define LDDCKR_MOSEL		(1 << 6)
+#define _LDDCKSTPR		0x414
+#define _LDINTR			0x468
+#define LDINTR_FE		(1 << 10)
+#define LDINTR_VSE		(1 << 9)
+#define LDINTR_VEE		(1 << 8)
+#define LDINTR_FS		(1 << 2)
+#define LDINTR_VSS		(1 << 1)
+#define LDINTR_VES		(1 << 0)
+#define LDINTR_STATUS_MASK	(0xff << 0)
+#define _LDSR			0x46c
+#define LDSR_MSS		(1 << 10)
+#define LDSR_MRS		(1 << 8)
+#define LDSR_AS			(1 << 1)
+#define _LDCNT1R		0x470
+#define LDCNT1R_DE		(1 << 0)
+#define _LDCNT2R		0x474
+#define LDCNT2R_BR		(1 << 8)
+#define LDCNT2R_MD		(1 << 3)
+#define LDCNT2R_SE		(1 << 2)
+#define LDCNT2R_ME		(1 << 1)
+#define LDCNT2R_DO		(1 << 0)
+#define _LDRCNTR		0x478
+#define LDRCNTR_SRS		(1 << 17)
+#define LDRCNTR_SRC		(1 << 16)
+#define LDRCNTR_MRS		(1 << 1)
+#define LDRCNTR_MRC		(1 << 0)
+#define _LDDDSR			0x47c
+#define LDDDSR_LS		(1 << 2)
+#define LDDDSR_WS		(1 << 1)
+#define LDDDSR_BS		(1 << 0)
+
+#define LDMT1R_VPOL		(1 << 28)
+#define LDMT1R_HPOL		(1 << 27)
+#define LDMT1R_DWPOL		(1 << 26)
+#define LDMT1R_DIPOL		(1 << 25)
+#define LDMT1R_DAPOL		(1 << 24)
+#define LDMT1R_HSCNT		(1 << 17)
+#define LDMT1R_DWCNT		(1 << 16)
+#define LDMT1R_IFM		(1 << 12)
+#define LDMT1R_MIFTYP_RGB8	(0x0 << 0)
+#define LDMT1R_MIFTYP_RGB9	(0x4 << 0)
+#define LDMT1R_MIFTYP_RGB12A	(0x5 << 0)
+#define LDMT1R_MIFTYP_RGB12B	(0x6 << 0)
+#define LDMT1R_MIFTYP_RGB16	(0x7 << 0)
+#define LDMT1R_MIFTYP_RGB18	(0xa << 0)
+#define LDMT1R_MIFTYP_RGB24	(0xb << 0)
+#define LDMT1R_MIFTYP_YCBCR	(0xf << 0)
+#define LDMT1R_MIFTYP_SYS8A	(0x0 << 0)
+#define LDMT1R_MIFTYP_SYS8B	(0x1 << 0)
+#define LDMT1R_MIFTYP_SYS8C	(0x2 << 0)
+#define LDMT1R_MIFTYP_SYS8D	(0x3 << 0)
+#define LDMT1R_MIFTYP_SYS9	(0x4 << 0)
+#define LDMT1R_MIFTYP_SYS12	(0x5 << 0)
+#define LDMT1R_MIFTYP_SYS16A	(0x7 << 0)
+#define LDMT1R_MIFTYP_SYS16B	(0x8 << 0)
+#define LDMT1R_MIFTYP_SYS16C	(0x9 << 0)
+#define LDMT1R_MIFTYP_SYS18	(0xa << 0)
+#define LDMT1R_MIFTYP_SYS24	(0xb << 0)
+#define LDMT1R_MIFTYP_MASK	(0xf << 0)
+
+#define LDDFR_CF1		(1 << 18)
+#define LDDFR_CF0		(1 << 17)
+#define LDDFR_CC		(1 << 16)
+#define LDDFR_YF_420		(0 << 8)
+#define LDDFR_YF_422		(1 << 8)
+#define LDDFR_YF_444		(2 << 8)
+#define LDDFR_YF_MASK		(3 << 8)
+#define LDDFR_PKF_ARGB32	(0x00 << 0)
+#define LDDFR_PKF_RGB16		(0x03 << 0)
+#define LDDFR_PKF_RGB24		(0x0b << 0)
+#define LDDFR_PKF_MASK		(0x1f << 0)
+
+#define LDSM1R_OS		(1 << 0)
+
+#define LDSM2R_OSTRG		(1 << 0)
+
+#define LDPMR_LPS		(3 << 0)
+
+#define _LDDWD0R		0x800
+#define LDDWDxR_WDACT		(1 << 28)
+#define LDDWDxR_RSW		(1 << 24)
+#define _LDDRDR			0x840
+#define LDDRDR_RSR		(1 << 24)
+#define LDDRDR_DRD_MASK		(0x3ffff << 0)
+#define _LDDWAR			0x900
+#define LDDWAR_WA		(1 << 0)
+#define _LDDRAR			0x904
+#define LDDRAR_RA		(1 << 0)
+
+enum {
+	RGB8	= LDMT1R_MIFTYP_RGB8,	/* 24bpp, 8:8:8 */
+	RGB9	= LDMT1R_MIFTYP_RGB9,	/* 18bpp, 9:9 */
+	RGB12A	= LDMT1R_MIFTYP_RGB12A,	/* 24bpp, 12:12 */
+	RGB12B	= LDMT1R_MIFTYP_RGB12B,	/* 12bpp */
+	RGB16	= LDMT1R_MIFTYP_RGB16,	/* 16bpp */
+	RGB18	= LDMT1R_MIFTYP_RGB18,	/* 18bpp */
+	RGB24	= LDMT1R_MIFTYP_RGB24,	/* 24bpp */
+	YUV422	= LDMT1R_MIFTYP_YCBCR,	/* 16bpp */
+	SYS8A	= LDMT1R_IFM | LDMT1R_MIFTYP_SYS8A,	/* 24bpp, 8:8:8 */
+	SYS8B	= LDMT1R_IFM | LDMT1R_MIFTYP_SYS8B,	/* 18bpp, 8:8:2 */
+	SYS8C	= LDMT1R_IFM | LDMT1R_MIFTYP_SYS8C,	/* 18bpp, 2:8:8 */
+	SYS8D	= LDMT1R_IFM | LDMT1R_MIFTYP_SYS8D,	/* 16bpp, 8:8 */
+	SYS9	= LDMT1R_IFM | LDMT1R_MIFTYP_SYS9,	/* 18bpp, 9:9 */
+	SYS12	= LDMT1R_IFM | LDMT1R_MIFTYP_SYS12,	/* 24bpp, 12:12 */
+	SYS16A	= LDMT1R_IFM | LDMT1R_MIFTYP_SYS16A,	/* 16bpp */
+	SYS16B	= LDMT1R_IFM | LDMT1R_MIFTYP_SYS16B,	/* 18bpp, 16:2 */
+	SYS16C	= LDMT1R_IFM | LDMT1R_MIFTYP_SYS16C,	/* 18bpp, 2:16 */
+	SYS18	= LDMT1R_IFM | LDMT1R_MIFTYP_SYS18,	/* 18bpp */
+	SYS24	= LDMT1R_IFM | LDMT1R_MIFTYP_SYS24,	/* 24bpp */
+};
+
+enum { LCDC_CHAN_DISABLED = 0,
+       LCDC_CHAN_MAINLCD,
+       LCDC_CHAN_SUBLCD };
+
+enum { LCDC_CLK_BUS, LCDC_CLK_PERIPHERAL, LCDC_CLK_EXTERNAL };
+
+#define LCDC_FLAGS_DWPOL (1 << 0) /* Rising edge dot clock data latch */
+#define LCDC_FLAGS_DIPOL (1 << 1) /* Active low display enable polarity */
+#define LCDC_FLAGS_DAPOL (1 << 2) /* Active low display data polarity */
+#define LCDC_FLAGS_HSCNT (1 << 3) /* Disable HSYNC during VBLANK */
+#define LCDC_FLAGS_DWCNT (1 << 4) /* Disable dotclock during blanking */
+
+struct sh_mobile_lcdc_sys_bus_cfg {
+	unsigned long ldmt2r;
+	unsigned long ldmt3r;
+	unsigned long deferred_io_msec;
+};
+
+struct sh_mobile_lcdc_sys_bus_ops {
+	void (*write_index)(void *handle, unsigned long data);
+	void (*write_data)(void *handle, unsigned long data);
+	unsigned long (*read_data)(void *handle);
+};
+
+struct sh_mobile_lcdc_panel_cfg {
+	unsigned long width;		/* Panel width in mm */
+	unsigned long height;		/* Panel height in mm */
+	int (*setup_sys)(void *sys_ops_handle,
+			 struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
+	void (*start_transfer)(void *sys_ops_handle,
+			       struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
+	void (*display_on)(void);
+	void (*display_off)(void);
+};
+
+/* backlight info */
+struct sh_mobile_lcdc_bl_info {
+	const char *name;
+	int max_brightness;
+	int (*set_brightness)(int brightness);
+	int (*get_brightness)(void);
+};
+
+struct sh_mobile_lcdc_chan_cfg {
+	int chan;
+	int fourcc;
+	int colorspace;
+	int interface_type; /* selects RGBn or SYSn I/F, see above */
+	int clock_divider;
+	unsigned long flags; /* LCDC_FLAGS_... */
+	const struct fb_videomode *lcd_modes;
+	int num_modes;
+	struct sh_mobile_lcdc_panel_cfg panel_cfg;
+	struct sh_mobile_lcdc_bl_info bl_info;
+	struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */
+	const struct sh_mobile_meram_cfg *meram_cfg;
+
+	struct platform_device *tx_dev;	/* HDMI/DSI transmitter device */
+};
+
+struct sh_mobile_lcdc_info {
+	int clock_source;
+	struct sh_mobile_lcdc_chan_cfg ch[2];
+	struct sh_mobile_meram_info *meram_dev;
+};
+
+#endif /* __ASM_SH_MOBILE_LCDC_H__ */
diff --git a/include/video/sh_mobile_meram.h b/include/video/sh_mobile_meram.h
new file mode 100644
index 00000000..29b2fd3b
--- /dev/null
+++ b/include/video/sh_mobile_meram.h
@@ -0,0 +1,63 @@
+#ifndef __VIDEO_SH_MOBILE_MERAM_H__
+#define __VIDEO_SH_MOBILE_MERAM_H__
+
+/* For sh_mobile_meram_info.addr_mode */
+enum {
+	SH_MOBILE_MERAM_MODE0 = 0,
+	SH_MOBILE_MERAM_MODE1
+};
+
+enum {
+	SH_MOBILE_MERAM_PF_NV = 0,
+	SH_MOBILE_MERAM_PF_RGB,
+	SH_MOBILE_MERAM_PF_NV24
+};
+
+
+struct sh_mobile_meram_priv;
+struct sh_mobile_meram_ops;
+
+/*
+ * struct sh_mobile_meram_info - MERAM platform data
+ * @reserved_icbs: Bitmask of reserved ICBs (for instance used through UIO)
+ */
+struct sh_mobile_meram_info {
+	int				addr_mode;
+	u32				reserved_icbs;
+	struct sh_mobile_meram_ops	*ops;
+	struct sh_mobile_meram_priv	*priv;
+	struct platform_device		*pdev;
+};
+
+/* icb config */
+struct sh_mobile_meram_icb_cfg {
+	unsigned int meram_size;	/* MERAM Buffer Size to use */
+};
+
+struct sh_mobile_meram_cfg {
+	struct sh_mobile_meram_icb_cfg icb[2];
+};
+
+struct module;
+struct sh_mobile_meram_ops {
+	struct module	*module;
+	/* register usage of meram */
+	void *(*meram_register)(struct sh_mobile_meram_info *meram_dev,
+				const struct sh_mobile_meram_cfg *cfg,
+				unsigned int xres, unsigned int yres,
+				unsigned int pixelformat,
+				unsigned int *pitch);
+
+	/* unregister usage of meram */
+	void (*meram_unregister)(struct sh_mobile_meram_info *meram_dev,
+				 void *data);
+
+	/* update meram settings */
+	void (*meram_update)(struct sh_mobile_meram_info *meram_dev, void *data,
+			     unsigned long base_addr_y,
+			     unsigned long base_addr_c,
+			     unsigned long *icb_addr_y,
+			     unsigned long *icb_addr_c);
+};
+
+#endif /* __VIDEO_SH_MOBILE_MERAM_H__  */
diff --git a/include/video/sisfb.h b/include/video/sisfb.h
new file mode 100644
index 00000000..6dc5df9e
--- /dev/null
+++ b/include/video/sisfb.h
@@ -0,0 +1,224 @@
+/*
+ * sisfb.h - definitions for the SiS framebuffer driver
+ *
+ * Copyright (C) 2001-2005 by Thomas Winischhofer, Vienna, Austria.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the named License,
+ * or any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
+ */
+
+#ifndef _LINUX_SISFB_H_
+#define _LINUX_SISFB_H_
+
+#include <linux/types.h>
+#include <asm/ioctl.h>
+
+/**********************************************/
+/*                   PUBLIC                   */
+/**********************************************/
+
+/* vbflags, public (others in sis.h) */
+#define CRT2_DEFAULT		0x00000001
+#define CRT2_LCD		0x00000002
+#define CRT2_TV			0x00000004
+#define CRT2_VGA		0x00000008
+#define TV_NTSC			0x00000010
+#define TV_PAL			0x00000020
+#define TV_HIVISION		0x00000040
+#define TV_YPBPR		0x00000080
+#define TV_AVIDEO		0x00000100
+#define TV_SVIDEO		0x00000200
+#define TV_SCART		0x00000400
+#define TV_PALM			0x00001000
+#define TV_PALN			0x00002000
+#define TV_NTSCJ		0x00001000
+#define TV_CHSCART		0x00008000
+#define TV_CHYPBPR525I		0x00010000
+#define CRT1_VGA		0x00000000
+#define CRT1_LCDA		0x00020000
+#define VGA2_CONNECTED          0x00040000
+#define VB_DISPTYPE_CRT1	0x00080000	/* CRT1 connected and used */
+#define VB_SINGLE_MODE		0x20000000	/* CRT1 or CRT2; determined by DISPTYPE_CRTx */
+#define VB_MIRROR_MODE		0x40000000	/* CRT1 + CRT2 identical (mirror mode) */
+#define VB_DUALVIEW_MODE	0x80000000	/* CRT1 + CRT2 independent (dual head mode) */
+
+/* Aliases: */
+#define CRT2_ENABLE		(CRT2_LCD | CRT2_TV | CRT2_VGA)
+#define TV_STANDARD		(TV_NTSC | TV_PAL | TV_PALM | TV_PALN | TV_NTSCJ)
+#define TV_INTERFACE		(TV_AVIDEO|TV_SVIDEO|TV_SCART|TV_HIVISION|TV_YPBPR|TV_CHSCART|TV_CHYPBPR525I)
+
+/* Only if TV_YPBPR is set: */
+#define TV_YPBPR525I		TV_NTSC
+#define TV_YPBPR525P		TV_PAL
+#define TV_YPBPR750P		TV_PALM
+#define TV_YPBPR1080I		TV_PALN
+#define TV_YPBPRALL 		(TV_YPBPR525I | TV_YPBPR525P | TV_YPBPR750P | TV_YPBPR1080I)
+
+#define VB_DISPTYPE_DISP2	CRT2_ENABLE
+#define VB_DISPTYPE_CRT2	CRT2_ENABLE
+#define VB_DISPTYPE_DISP1	VB_DISPTYPE_CRT1
+#define VB_DISPMODE_SINGLE	VB_SINGLE_MODE
+#define VB_DISPMODE_MIRROR	VB_MIRROR_MODE
+#define VB_DISPMODE_DUAL	VB_DUALVIEW_MODE
+#define VB_DISPLAY_MODE		(SINGLE_MODE | MIRROR_MODE | DUALVIEW_MODE)
+
+/* Structure argument for SISFB_GET_INFO ioctl  */
+struct sisfb_info {
+	__u32	sisfb_id;		/* for identifying sisfb */
+#ifndef SISFB_ID
+#define SISFB_ID	  0x53495346    /* Identify myself with 'SISF' */
+#endif
+	__u32   chip_id;		/* PCI-ID of detected chip */
+	__u32   memory;			/* total video memory in KB */
+	__u32   heapstart;		/* heap start offset in KB */
+	__u8    fbvidmode;		/* current sisfb mode */
+
+	__u8	sisfb_version;
+	__u8	sisfb_revision;
+	__u8	sisfb_patchlevel;
+
+	__u8	sisfb_caps;		/* sisfb capabilities */
+
+	__u32	sisfb_tqlen;		/* turbo queue length (in KB) */
+
+	__u32	sisfb_pcibus;		/* The card's PCI ID */
+	__u32	sisfb_pcislot;
+	__u32	sisfb_pcifunc;
+
+	__u8	sisfb_lcdpdc;		/* PanelDelayCompensation */
+
+	__u8	sisfb_lcda;		/* Detected status of LCDA for low res/text modes */
+
+	__u32	sisfb_vbflags;
+	__u32	sisfb_currentvbflags;
+
+	__u32	sisfb_scalelcd;
+	__u32	sisfb_specialtiming;
+
+	__u8	sisfb_haveemi;
+	__u8	sisfb_emi30,sisfb_emi31,sisfb_emi32,sisfb_emi33;
+	__u8	sisfb_haveemilcd;
+
+	__u8	sisfb_lcdpdca;		/* PanelDelayCompensation for LCD-via-CRT1 */
+
+	__u16	sisfb_tvxpos, sisfb_tvypos;	/* Warning: Values + 32 ! */
+
+	__u32	sisfb_heapsize;		/* heap size (in KB) */
+	__u32	sisfb_videooffset;	/* Offset of viewport in video memory (in bytes) */
+
+	__u32	sisfb_curfstn;		/* currently running FSTN/DSTN mode */
+	__u32	sisfb_curdstn;
+
+	__u16	sisfb_pci_vendor;	/* PCI vendor (SiS or XGI) */
+
+	__u32	sisfb_vbflags2;		/* ivideo->vbflags2 */
+
+	__u8	sisfb_can_post;		/* sisfb can POST this card */
+	__u8	sisfb_card_posted;	/* card is POSTED */
+	__u8	sisfb_was_boot_device;	/* This card was the boot video device (ie is primary) */
+
+	__u8	reserved[183];		/* for future use */
+};
+
+#define SISFB_CMD_GETVBFLAGS	0x55AA0001	/* no arg; result[1] = vbflags */
+#define SISFB_CMD_SWITCHCRT1	0x55AA0010	/* arg[0]: 99 = query, 0 = off, 1 = on */
+/* more to come */
+
+#define SISFB_CMD_ERR_OK	0x80000000	/* command succeeded */
+#define SISFB_CMD_ERR_LOCKED	0x80000001	/* sisfb is locked */
+#define SISFB_CMD_ERR_EARLY	0x80000002	/* request before sisfb took over gfx system */
+#define SISFB_CMD_ERR_NOVB	0x80000003	/* No video bridge */
+#define SISFB_CMD_ERR_NOCRT2	0x80000004	/* can't change CRT1 status, CRT2 disabled */
+/* more to come */
+#define SISFB_CMD_ERR_UNKNOWN   0x8000ffff	/* Unknown command */
+#define SISFB_CMD_ERR_OTHER	0x80010000	/* Other error */
+
+/* Argument for SISFB_CMD ioctl */
+struct sisfb_cmd {
+	__u32  sisfb_cmd;
+	__u32  sisfb_arg[16];
+	__u32  sisfb_result[4];
+};
+
+/* Additional IOCTLs for communication sisfb <> X driver                */
+/* If changing this, vgatypes.h must also be changed (for X driver)    */
+
+/* ioctl for identifying and giving some info (esp. memory heap start) */
+#define SISFB_GET_INFO_SIZE	_IOR(0xF3,0x00,__u32)
+#define SISFB_GET_INFO		_IOR(0xF3,0x01,struct sisfb_info)
+
+/* ioctrl to get current vertical retrace status */
+#define SISFB_GET_VBRSTATUS	_IOR(0xF3,0x02,__u32)
+
+/* ioctl to enable/disable panning auto-maximize (like nomax parameter) */
+#define SISFB_GET_AUTOMAXIMIZE	_IOR(0xF3,0x03,__u32)
+#define SISFB_SET_AUTOMAXIMIZE	_IOW(0xF3,0x03,__u32)
+
+/* ioctls to relocate TV output (x=D[31:16], y=D[15:0], + 32)*/
+#define SISFB_GET_TVPOSOFFSET	_IOR(0xF3,0x04,__u32)
+#define SISFB_SET_TVPOSOFFSET	_IOW(0xF3,0x04,__u32)
+
+/* ioctl for internal sisfb commands (sisfbctrl) */
+#define SISFB_COMMAND		_IOWR(0xF3,0x05,struct sisfb_cmd)
+
+/* ioctl for locking sisfb (no register access during lock) */
+/* As of now, only used to avoid register access during
+ * the ioctls listed above.
+ */
+#define SISFB_SET_LOCK		_IOW(0xF3,0x06,__u32)
+
+/* ioctls 0xF3 up to 0x3F reserved for sisfb */
+
+/****************************************************************/
+/* The following are deprecated and should not be used anymore: */
+/****************************************************************/
+/* ioctl for identifying and giving some info (esp. memory heap start) */
+#define SISFB_GET_INFO_OLD	   _IOR('n',0xF8,__u32)
+/* ioctrl to get current vertical retrace status */
+#define SISFB_GET_VBRSTATUS_OLD	   _IOR('n',0xF9,__u32)
+/* ioctl to enable/disable panning auto-maximize (like nomax parameter) */
+#define SISFB_GET_AUTOMAXIMIZE_OLD _IOR('n',0xFA,__u32)
+#define SISFB_SET_AUTOMAXIMIZE_OLD _IOW('n',0xFA,__u32)
+/****************************************************************/
+/*               End of deprecated ioctl numbers                */
+/****************************************************************/
+
+/* For fb memory manager (FBIO_ALLOC, FBIO_FREE) */
+struct sis_memreq {
+	__u32	offset;
+	__u32	size;
+};
+
+/**********************************************/
+/*                  PRIVATE                   */
+/*         (for IN-KERNEL usage only)         */
+/**********************************************/
+
+#ifdef __KERNEL__
+
+#include <linux/pci.h>
+
+#define	UNKNOWN_VGA  0
+#define	SIS_300_VGA  1
+#define	SIS_315_VGA  2
+
+#define SISFB_HAVE_MALLOC_NEW
+extern void sis_malloc(struct sis_memreq *req);
+extern void sis_malloc_new(struct pci_dev *pdev, struct sis_memreq *req);
+
+extern void sis_free(u32 base);
+extern void sis_free_new(struct pci_dev *pdev, u32 base);
+#endif
+
+#endif
diff --git a/include/video/sstfb.h b/include/video/sstfb.h
new file mode 100644
index 00000000..c449eace
--- /dev/null
+++ b/include/video/sstfb.h
@@ -0,0 +1,355 @@
+/*
+ * linux/drivers/video/sstfb.h -- voodoo graphics frame buffer
+ *
+ *     Copyright (c) 2000,2001 Ghozlane Toumi <gtoumi@messel.emse.fr>
+ *
+ *     Created 28 Aug 2001 by Ghozlane Toumi
+ */
+
+
+#ifndef _SSTFB_H_
+#define _SSTFB_H_
+
+/*
+ *
+ *  Debug Stuff
+ *
+ */
+
+#ifdef SST_DEBUG
+#  define dprintk(X...)		printk("sstfb: " X)
+#  define SST_DEBUG_REG  1
+#  define SST_DEBUG_FUNC 1
+#  define SST_DEBUG_VAR  1
+#else
+#  define dprintk(X...)
+#  define SST_DEBUG_REG  0
+#  define SST_DEBUG_FUNC 0
+#  define SST_DEBUG_VAR  0
+#endif
+
+#if (SST_DEBUG_REG > 0)
+#  define r_dprintk(X...)	dprintk(X)
+#else
+#  define r_dprintk(X...)
+#endif
+#if (SST_DEBUG_REG > 1)
+#  define r_ddprintk(X...)	dprintk(" " X)
+#else
+#  define r_ddprintk(X...)
+#endif
+
+#if (SST_DEBUG_FUNC > 0)
+#  define f_dprintk(X...)	dprintk(X)
+#else
+#  define f_dprintk(X...)
+#endif
+#if (SST_DEBUG_FUNC > 1)
+#  define f_ddprintk(X...)	dprintk(" " X)
+#else
+#  define f_ddprintk(X...)
+#endif
+#if (SST_DEBUG_FUNC > 2)
+#  define f_dddprintk(X...)	dprintk(" " X)
+#else
+#  define f_dddprintk(X...)
+#endif
+
+#if (SST_DEBUG_VAR > 0)
+#  define v_dprintk(X...)	dprintk(X)
+#  define print_var(V, X...)	\
+   {				\
+     dprintk(X);		\
+     printk(" :\n");		\
+     sst_dbg_print_var(V);	\
+   }
+#else
+#  define v_dprintk(X...)
+#  define print_var(X,Y...)
+#endif
+
+#define POW2(x)		(1ul<<(x))
+
+/*
+ *
+ *  Const
+ *
+ */
+
+/* pci stuff */
+#define PCI_INIT_ENABLE		0x40
+#  define PCI_EN_INIT_WR	  BIT(0)
+#  define PCI_EN_FIFO_WR	  BIT(1)
+#  define PCI_REMAP_DAC		  BIT(2)
+#define PCI_VCLK_ENABLE		0xc0	/* enable video */
+#define PCI_VCLK_DISABLE	0xe0
+
+/* register offsets from memBaseAddr */
+#define STATUS			0x0000
+#  define STATUS_FBI_BUSY	  BIT(7)
+#define FBZMODE			0x0110
+#  define EN_CLIPPING		  BIT(0)	/* enable clipping */
+#  define EN_RGB_WRITE		  BIT(9)	/* enable writes to rgb area */
+#  define EN_ALPHA_WRITE	  BIT(10)
+#  define ENGINE_INVERT_Y	  BIT(17)	/* invert Y origin (pipe) */
+#define LFBMODE			0x0114
+#  define LFB_565		  0		/* bits 3:0 .16 bits RGB */
+#  define LFB_888		  4		/* 24 bits RGB */
+#  define LFB_8888		  5		/* 32 bits ARGB */
+#  define WR_BUFF_FRONT		  0		/* write buf select (front) */
+#  define WR_BUFF_BACK		  (1 << 4)	/* back */
+#  define RD_BUFF_FRONT		  0		/* read buff select (front) */
+#  define RD_BUFF_BACK		  (1 << 6)	/* back */
+#  define EN_PXL_PIPELINE	  BIT(8)	/* pixel pipeline (clip..)*/
+#  define LFB_WORD_SWIZZLE_WR	  BIT(11)	/* enable write-wordswap (big-endian) */
+#  define LFB_BYTE_SWIZZLE_WR	  BIT(12)	/* enable write-byteswap (big-endian) */
+#  define LFB_INVERT_Y		  BIT(13)	/* invert Y origin (LFB) */
+#  define LFB_WORD_SWIZZLE_RD	  BIT(15)	/* enable read-wordswap (big-endian) */
+#  define LFB_BYTE_SWIZZLE_RD	  BIT(16)	/* enable read-byteswap (big-endian) */
+#define CLIP_LEFT_RIGHT		0x0118
+#define CLIP_LOWY_HIGHY		0x011c
+#define NOPCMD			0x0120
+#define FASTFILLCMD		0x0124
+#define SWAPBUFFCMD		0x0128
+#define FBIINIT4		0x0200		/* misc controls */
+#  define FAST_PCI_READS	  0		/* 1 waitstate */
+#  define SLOW_PCI_READS	  BIT(0)	/* 2 ws */
+#  define LFB_READ_AHEAD	  BIT(1)
+#define BACKPORCH		0x0208
+#define VIDEODIMENSIONS		0x020c
+#define FBIINIT0		0x0210		/* misc+fifo  controls */
+#  define DIS_VGA_PASSTHROUGH	  BIT(0)
+#  define FBI_RESET		  BIT(1)
+#  define FIFO_RESET		  BIT(2)
+#define FBIINIT1		0x0214		/* PCI + video controls */
+#  define VIDEO_MASK		  0x8080010f	/* masks video related bits V1+V2*/
+#  define FAST_PCI_WRITES	  0		/* 0 ws */
+#  define SLOW_PCI_WRITES	  BIT(1)	/* 1 ws */
+#  define EN_LFB_READ		  BIT(3)
+#  define TILES_IN_X_SHIFT	  4
+#  define VIDEO_RESET		  BIT(8)
+#  define EN_BLANKING		  BIT(12)
+#  define EN_DATA_OE		  BIT(13)
+#  define EN_BLANK_OE		  BIT(14)
+#  define EN_HVSYNC_OE		  BIT(15)
+#  define EN_DCLK_OE		  BIT(16)
+#  define SEL_INPUT_VCLK_2X	  0		/* bit 17 */
+#  define SEL_INPUT_VCLK_SLAVE	  BIT(17)
+#  define SEL_SOURCE_VCLK_SLAVE	  0		/* bits 21:20 */
+#  define SEL_SOURCE_VCLK_2X_DIV2 (0x01 << 20)
+#  define SEL_SOURCE_VCLK_2X_SEL  (0x02 << 20)
+#  define EN_24BPP		  BIT(22)
+#  define TILES_IN_X_MSB_SHIFT	  24		/* v2 */
+#  define VCLK_2X_SEL_DEL_SHIFT	  27		/* vclk out delay 0,4,6,8ns */
+#  define VCLK_DEL_SHIFT	  29		/* vclk in delay */
+#define FBIINIT2		0x0218		/* Dram controls */
+#  define EN_FAST_RAS_READ	  BIT(5)
+#  define EN_DRAM_OE		  BIT(6)
+#  define EN_FAST_RD_AHEAD_WR	  BIT(7)
+#  define VIDEO_OFFSET_SHIFT	  11		/* unit: #rows tile 64x16/2 */
+#  define SWAP_DACVSYNC		  0
+#  define SWAP_DACDATA0		  (1 << 9)
+#  define SWAP_FIFO_STALL	  (2 << 9)
+#  define EN_RD_AHEAD_FIFO	  BIT(21)
+#  define EN_DRAM_REFRESH	  BIT(22)
+#  define DRAM_REFRESH_16	  (0x30 << 23)	/* dram 16 ms */
+#define DAC_READ		FBIINIT2	/* in remap mode */
+#define FBIINIT3		0x021c		/* fbi controls */
+#  define DISABLE_TEXTURE	  BIT(6)
+#  define Y_SWAP_ORIGIN_SHIFT	  22		/* Y swap subtraction value */
+#define HSYNC			0x0220
+#define VSYNC			0x0224
+#define DAC_DATA		0x022c
+#  define DAC_READ_CMD		  BIT(11)	/* set read dacreg mode */
+#define FBIINIT5		0x0244		/* v2 specific */
+#  define FBIINIT5_MASK		  0xfa40ffff    /* mask video bits*/
+#  define HDOUBLESCAN		  BIT(20)
+#  define VDOUBLESCAN		  BIT(21)
+#  define HSYNC_HIGH 		  BIT(23)
+#  define VSYNC_HIGH 		  BIT(24)
+#  define INTERLACE		  BIT(26)
+#define FBIINIT6		0x0248		/* v2 specific */
+#  define TILES_IN_X_LSB_SHIFT	  30		/* v2 */
+#define FBIINIT7		0x024c		/* v2 specific */
+
+#define BLTSRCBASEADDR		0x02c0	/* BitBLT Source base address */
+#define BLTDSTBASEADDR		0x02c4	/* BitBLT Destination base address */
+#define BLTXYSTRIDES		0x02c8	/* BitBLT Source and Destination strides */
+#define BLTSRCCHROMARANGE	0x02cc	/* BitBLT Source Chroma key range */
+#define BLTDSTCHROMARANGE	0x02d0	/* BitBLT Destination Chroma key range */
+#define BLTCLIPX		0x02d4	/* BitBLT Min/Max X clip values */
+#define BLTCLIPY		0x02d8	/* BitBLT Min/Max Y clip values */
+#define BLTSRCXY		0x02e0	/* BitBLT Source starting XY coordinates */
+#define BLTDSTXY		0x02e4	/* BitBLT Destination starting XY coordinates */
+#define BLTSIZE			0x02e8	/* BitBLT width and height */
+#define BLTROP			0x02ec	/* BitBLT Raster operations */
+#  define BLTROP_COPY		  0x0cccc
+#  define BLTROP_INVERT		  0x05555
+#  define BLTROP_XOR		  0x06666
+#define BLTCOLOR		0x02f0	/* BitBLT and foreground background colors */
+#define BLTCOMMAND		0x02f8	/* BitBLT command mode (v2 specific) */
+# define BLT_SCR2SCR_BITBLT	  0	  /* Screen-to-Screen BitBLT */
+# define BLT_CPU2SCR_BITBLT	  1	  /* CPU-to-screen BitBLT */
+# define BLT_RECFILL_BITBLT	  2	  /* BitBLT Rectangle Fill */
+# define BLT_16BPP_FMT		  2	  /* 16 BPP (5-6-5 RGB) */
+#define BLTDATA			0x02fc	/* BitBLT data for CPU-to-Screen BitBLTs */
+#  define LAUNCH_BITBLT		  BIT(31) /* Launch BitBLT in BltCommand, bltDstXY or bltSize */
+
+/* Dac Registers */
+#define DACREG_WMA		0x0	/* pixel write mode address */
+#define DACREG_LUT		0x01	/* color value */
+#define DACREG_RMR		0x02	/* pixel mask */
+#define DACREG_RMA		0x03	/* pixel read mode address */
+/*Dac registers in indexed mode (TI, ATT dacs) */
+#define DACREG_ADDR_I		DACREG_WMA
+#define DACREG_DATA_I		DACREG_RMR
+#define DACREG_RMR_I		0x00
+#define DACREG_CR0_I		0x01
+#  define DACREG_CR0_EN_INDEXED	  BIT(0)	/* enable indexec mode */
+#  define DACREG_CR0_8BIT	  BIT(1)	/* set dac to 8 bits/read */
+#  define DACREG_CR0_PWDOWN	  BIT(3)	/* powerdown dac */
+#  define DACREG_CR0_16BPP	  0x30		/* mode 3 */
+#  define DACREG_CR0_24BPP	  0x50		/* mode 5 */
+#define	DACREG_CR1_I		0x05
+#define DACREG_CC_I		0x06
+#  define DACREG_CC_CLKA	  BIT(7)	/* clk A controlled by regs */
+#  define DACREG_CC_CLKA_C	  (2<<4)	/* clk A uses reg C */
+#  define DACREG_CC_CLKB	  BIT(3)	/* clk B controlled by regs */
+#  define DACREG_CC_CLKB_D	  3		/* clkB uses reg D */
+#define DACREG_AC0_I		0x48		/* clock A reg C */
+#define DACREG_AC1_I		0x49
+#define DACREG_BD0_I		0x6c		/* clock B reg D */
+#define DACREG_BD1_I		0x6d
+
+/* identification constants */
+#define DACREG_MIR_TI		0x97
+#define DACREG_DIR_TI		0x09
+#define DACREG_MIR_ATT		0x84
+#define DACREG_DIR_ATT		0x09
+/* ics dac specific registers */
+#define DACREG_ICS_PLLWMA	0x04	/* PLL write mode address */
+#define DACREG_ICS_PLLDATA	0x05	/* PLL data /parameter */
+#define DACREG_ICS_CMD		0x06	/* command */
+#  define DACREG_ICS_CMD_16BPP	  0x50	/* ics color mode 6 (16bpp bypass)*/
+#  define DACREG_ICS_CMD_24BPP	  0x70	/* ics color mode 7 (24bpp bypass)*/
+#  define DACREG_ICS_CMD_PWDOWN BIT(0)	/* powerdown dac */
+#define DACREG_ICS_PLLRMA	0x07	/* PLL read mode address */
+/*
+ * pll parameter register:
+ * indexed : write addr to PLLWMA, write data in PLLDATA.
+ * for reads use PLLRMA .
+ * 8 freq registers (0-7) for video clock (CLK0)
+ * 2 freq registers (a-b) for graphic clock (CLK1)
+ */
+#define DACREG_ICS_PLL_CLK0_1_INI 0x55	/* initial pll M value for freq f1  */
+#define DACREG_ICS_PLL_CLK0_7_INI 0x71	/* f7 */
+#define DACREG_ICS_PLL_CLK1_B_INI 0x79	/* fb */
+#define DACREG_ICS_PLL_CTRL	0x0e
+#  define DACREG_ICS_CLK0	  BIT(5)
+#  define DACREG_ICS_CLK0_0	  0
+#  define DACREG_ICS_CLK1_A	  0	/* bit4 */
+
+/* sst default init registers */
+#define FBIINIT0_DEFAULT DIS_VGA_PASSTHROUGH
+
+#define FBIINIT1_DEFAULT 	\
+	(			\
+	  FAST_PCI_WRITES	\
+/*	  SLOW_PCI_WRITES*/	\
+	| VIDEO_RESET		\
+	| 10 << TILES_IN_X_SHIFT\
+	| SEL_SOURCE_VCLK_2X_SEL\
+	| EN_LFB_READ		\
+	)
+
+#define FBIINIT2_DEFAULT	\
+	(			\
+	 SWAP_DACVSYNC		\
+	| EN_DRAM_OE		\
+	| DRAM_REFRESH_16	\
+	| EN_DRAM_REFRESH	\
+	| EN_FAST_RAS_READ	\
+	| EN_RD_AHEAD_FIFO	\
+	| EN_FAST_RD_AHEAD_WR	\
+	)
+
+#define FBIINIT3_DEFAULT 	\
+	( DISABLE_TEXTURE )
+
+#define FBIINIT4_DEFAULT	\
+	(			\
+	  FAST_PCI_READS	\
+/*	  SLOW_PCI_READS*/	\
+	| LFB_READ_AHEAD	\
+	)
+/* Careful with this one : writing back the data just read will trash the DAC
+   reading some fields give logic value on pins, but setting this field will
+   set the source signal driving the pin. conclusion : just use the default
+   as a base before writing back .
+*/
+#define FBIINIT6_DEFAULT	(0x0)
+
+/*
+ *
+ * Misc Const
+ *
+ */
+
+/* ioctl to enable/disable VGA passthrough */
+#define SSTFB_SET_VGAPASS	_IOW('F', 0xdd, __u32)
+#define SSTFB_GET_VGAPASS	_IOR('F', 0xdd, __u32)
+
+
+/* used to know witch clock to set */
+enum {
+	VID_CLOCK=0,
+	GFX_CLOCK=1,
+};
+
+/* freq max */
+#define DAC_FREF	14318	/* DAC reference freq (Khz) */
+#define VCO_MAX		260000
+
+/*
+ *  driver structs
+ */
+
+struct pll_timing {
+	unsigned int m;
+	unsigned int n;
+	unsigned int p;
+};
+
+struct dac_switch {
+	const char *name;
+	int (*detect) (struct fb_info *info);
+	int (*set_pll) (struct fb_info *info, const struct pll_timing *t, const int clock);
+	void (*set_vidmod) (struct fb_info *info, const int bpp);
+};
+
+struct sst_spec {
+	char * name;
+	int default_gfx_clock;	/* 50000 for voodoo1, 75000 for voodoo2 */
+	int max_gfxclk; 	/* ! in Mhz ie 60 for voodoo 1 */
+};
+
+struct sstfb_par {
+	u32 palette[16];
+	unsigned int yDim;
+	unsigned int hSyncOn;	/* hsync_len */
+	unsigned int hSyncOff;	/* left_margin + xres + right_margin */
+	unsigned int hBackPorch;/* left_margin */
+	unsigned int vSyncOn;
+	unsigned int vSyncOff;
+	unsigned int vBackPorch;
+	struct pll_timing pll;
+	unsigned int tiles_in_X;/* num of tiles in X res */
+	u8 __iomem *mmio_vbase;
+	struct dac_switch 	dac_sw;	/* dac specific functions */
+	struct pci_dev		*dev;
+	int	type;
+	u8	revision;
+	u8	vgapass;	/* VGA pass through: 1=enabled, 0=disabled */
+};
+
+#endif /* _SSTFB_H_ */
diff --git a/include/video/tdfx.h b/include/video/tdfx.h
new file mode 100644
index 00000000..befbaf0a
--- /dev/null
+++ b/include/video/tdfx.h
@@ -0,0 +1,208 @@
+#ifndef _TDFX_H
+#define _TDFX_H
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+
+/* membase0 register offsets */
+#define STATUS		0x00
+#define PCIINIT0	0x04
+#define SIPMONITOR	0x08
+#define LFBMEMORYCONFIG	0x0c
+#define MISCINIT0	0x10
+#define MISCINIT1	0x14
+#define DRAMINIT0	0x18
+#define DRAMINIT1	0x1c
+#define AGPINIT		0x20
+#define TMUGBEINIT	0x24
+#define VGAINIT0	0x28
+#define VGAINIT1	0x2c
+#define DRAMCOMMAND	0x30
+#define DRAMDATA	0x34
+/* reserved	0x38 */
+/* reserved	0x3c */
+#define PLLCTRL0	0x40
+#define PLLCTRL1	0x44
+#define PLLCTRL2	0x48
+#define DACMODE		0x4c
+#define DACADDR		0x50
+#define DACDATA		0x54
+#define RGBMAXDELTA	0x58
+#define VIDPROCCFG	0x5c
+#define HWCURPATADDR	0x60
+#define HWCURLOC	0x64
+#define HWCURC0		0x68
+#define HWCURC1		0x6c
+#define VIDINFORMAT	0x70
+#define VIDINSTATUS	0x74
+#define VIDSERPARPORT	0x78
+#define VIDINXDELTA	0x7c
+#define VIDININITERR	0x80
+#define VIDINYDELTA	0x84
+#define VIDPIXBUFTHOLD	0x88
+#define VIDCHRMIN	0x8c
+#define VIDCHRMAX	0x90
+#define VIDCURLIN	0x94
+#define VIDSCREENSIZE	0x98
+#define VIDOVRSTARTCRD	0x9c
+#define VIDOVRENDCRD	0xa0
+#define VIDOVRDUDX	0xa4
+#define VIDOVRDUDXOFF	0xa8
+#define VIDOVRDVDY	0xac
+/* ... */
+#define VIDOVRDVDYOFF	0xe0
+#define VIDDESKSTART	0xe4
+#define VIDDESKSTRIDE	0xe8
+#define VIDINADDR0	0xec
+#define VIDINADDR1	0xf0
+#define VIDINADDR2	0xf4
+#define VIDINSTRIDE	0xf8
+#define VIDCUROVRSTART	0xfc
+
+#define INTCTRL		(0x00100000 + 0x04)
+#define CLIP0MIN	(0x00100000 + 0x08)
+#define CLIP0MAX	(0x00100000 + 0x0c)
+#define DSTBASE		(0x00100000 + 0x10)
+#define DSTFORMAT	(0x00100000 + 0x14)
+#define SRCBASE		(0x00100000 + 0x34)
+#define COMMANDEXTRA_2D	(0x00100000 + 0x38)
+#define CLIP1MIN	(0x00100000 + 0x4c)
+#define CLIP1MAX	(0x00100000 + 0x50)
+#define SRCFORMAT	(0x00100000 + 0x54)
+#define SRCSIZE		(0x00100000 + 0x58)
+#define SRCXY		(0x00100000 + 0x5c)
+#define COLORBACK	(0x00100000 + 0x60)
+#define COLORFORE	(0x00100000 + 0x64)
+#define DSTSIZE		(0x00100000 + 0x68)
+#define DSTXY		(0x00100000 + 0x6c)
+#define COMMAND_2D	(0x00100000 + 0x70)
+#define LAUNCH_2D	(0x00100000 + 0x80)
+
+#define COMMAND_3D	(0x00200000 + 0x120)
+
+/* register bitfields (not all, only as needed) */
+
+/* COMMAND_2D reg. values */
+#define TDFX_ROP_COPY		0xcc	/* src */
+#define TDFX_ROP_INVERT		0x55	/* NOT dst */
+#define TDFX_ROP_XOR		0x66	/* src XOR dst */
+
+#define AUTOINC_DSTX			BIT(10)
+#define AUTOINC_DSTY			BIT(11)
+#define COMMAND_2D_FILLRECT		0x05
+#define COMMAND_2D_S2S_BITBLT		0x01	/* screen to screen */
+#define COMMAND_2D_H2S_BITBLT		0x03	/* host to screen */
+
+#define COMMAND_3D_NOP			0x00
+#define STATUS_RETRACE			BIT(6)
+#define STATUS_BUSY			BIT(9)
+#define MISCINIT1_CLUT_INV		BIT(0)
+#define MISCINIT1_2DBLOCK_DIS		BIT(15)
+#define DRAMINIT0_SGRAM_NUM		BIT(26)
+#define DRAMINIT0_SGRAM_TYPE		BIT(27)
+#define DRAMINIT0_SGRAM_TYPE_MASK       (BIT(27) | BIT(28) | BIT(29))
+#define DRAMINIT0_SGRAM_TYPE_SHIFT      27
+#define DRAMINIT1_MEM_SDRAM		BIT(30)
+#define VGAINIT0_VGA_DISABLE		BIT(0)
+#define VGAINIT0_EXT_TIMING		BIT(1)
+#define VGAINIT0_8BIT_DAC		BIT(2)
+#define VGAINIT0_EXT_ENABLE		BIT(6)
+#define VGAINIT0_WAKEUP_3C3		BIT(8)
+#define VGAINIT0_LEGACY_DISABLE		BIT(9)
+#define VGAINIT0_ALT_READBACK		BIT(10)
+#define VGAINIT0_FAST_BLINK		BIT(11)
+#define VGAINIT0_EXTSHIFTOUT		BIT(12)
+#define VGAINIT0_DECODE_3C6		BIT(13)
+#define VGAINIT0_SGRAM_HBLANK_DISABLE	BIT(22)
+#define VGAINIT1_MASK			0x1fffff
+#define VIDCFG_VIDPROC_ENABLE		BIT(0)
+#define VIDCFG_CURS_X11			BIT(1)
+#define VIDCFG_INTERLACE		BIT(3)
+#define VIDCFG_HALF_MODE		BIT(4)
+#define VIDCFG_DESK_ENABLE		BIT(7)
+#define VIDCFG_CLUT_BYPASS		BIT(10)
+#define VIDCFG_2X			BIT(26)
+#define VIDCFG_HWCURSOR_ENABLE		BIT(27)
+#define VIDCFG_PIXFMT_SHIFT             18
+#define DACMODE_2X			BIT(0)
+
+/* I2C bit locations in the VIDSERPARPORT register */
+#define DDC_ENAB	0x00040000
+#define DDC_SCL_OUT	0x00080000
+#define DDC_SDA_OUT	0x00100000
+#define DDC_SCL_IN	0x00200000
+#define DDC_SDA_IN	0x00400000
+#define I2C_ENAB	0x00800000
+#define I2C_SCL_OUT	0x01000000
+#define I2C_SDA_OUT	0x02000000
+#define I2C_SCL_IN	0x04000000
+#define I2C_SDA_IN	0x08000000
+
+/* VGA rubbish, need to change this for multihead support */
+#define MISC_W		0x3c2
+#define MISC_R		0x3cc
+#define SEQ_I		0x3c4
+#define SEQ_D		0x3c5
+#define CRT_I		0x3d4
+#define CRT_D		0x3d5
+#define ATT_IW		0x3c0
+#define IS1_R		0x3da
+#define GRA_I		0x3ce
+#define GRA_D		0x3cf
+
+#ifdef __KERNEL__
+
+struct banshee_reg {
+	/* VGA rubbish */
+	unsigned char att[21];
+	unsigned char crt[25];
+	unsigned char gra[9];
+	unsigned char misc[1];
+	unsigned char seq[5];
+
+	/* Banshee extensions */
+	unsigned char ext[2];
+	unsigned long vidcfg;
+	unsigned long vidpll;
+	unsigned long mempll;
+	unsigned long gfxpll;
+	unsigned long dacmode;
+	unsigned long vgainit0;
+	unsigned long vgainit1;
+	unsigned long screensize;
+	unsigned long stride;
+	unsigned long cursloc;
+	unsigned long curspataddr;
+	unsigned long cursc0;
+	unsigned long cursc1;
+	unsigned long startaddr;
+	unsigned long clip0min;
+	unsigned long clip0max;
+	unsigned long clip1min;
+	unsigned long clip1max;
+	unsigned long miscinit0;
+};
+
+struct tdfx_par;
+
+struct tdfxfb_i2c_chan {
+	struct tdfx_par *par;
+	struct i2c_adapter adapter;
+	struct i2c_algo_bit_data algo;
+};
+
+struct tdfx_par {
+	u32 max_pixclock;
+	u32 palette[16];
+	void __iomem *regbase_virt;
+	unsigned long iobase;
+	int mtrr_handle;
+#ifdef CONFIG_FB_3DFX_I2C
+	struct tdfxfb_i2c_chan chan[2];
+#endif
+};
+
+#endif	/* __KERNEL__ */
+
+#endif	/* _TDFX_H */
+
diff --git a/include/video/tgafb.h b/include/video/tgafb.h
new file mode 100644
index 00000000..7bc5e2c1
--- /dev/null
+++ b/include/video/tgafb.h
@@ -0,0 +1,280 @@
+/*
+ *  linux/drivers/video/tgafb.h -- DEC 21030 TGA frame buffer device
+ *
+ *  	Copyright (C) 1999,2000 Martin Lucina, Tom Zerucha
+ *  
+ *  $Id: tgafb.h,v 1.4.2.3 2000/04/04 06:44:56 mato Exp $
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+#ifndef TGAFB_H
+#define TGAFB_H
+
+/*
+ * TGA hardware description (minimal)
+ */
+
+#define TGA_TYPE_8PLANE			0
+#define TGA_TYPE_24PLANE		1
+#define TGA_TYPE_24PLUSZ		3
+
+/*
+ * Offsets within Memory Space
+ */
+
+#define	TGA_ROM_OFFSET			0x0000000
+#define	TGA_REGS_OFFSET			0x0100000
+#define	TGA_8PLANE_FB_OFFSET		0x0200000
+#define	TGA_24PLANE_FB_OFFSET		0x0804000
+#define	TGA_24PLUSZ_FB_OFFSET		0x1004000
+
+#define TGA_FOREGROUND_REG		0x0020
+#define TGA_BACKGROUND_REG		0x0024
+#define	TGA_PLANEMASK_REG		0x0028
+#define TGA_PIXELMASK_ONESHOT_REG	0x002c
+#define	TGA_MODE_REG			0x0030
+#define	TGA_RASTEROP_REG		0x0034
+#define	TGA_PIXELSHIFT_REG		0x0038
+#define	TGA_DEEP_REG			0x0050
+#define	TGA_START_REG			0x0054
+#define	TGA_PIXELMASK_REG		0x005c
+#define	TGA_CURSOR_BASE_REG		0x0060
+#define	TGA_HORIZ_REG			0x0064
+#define	TGA_VERT_REG			0x0068
+#define	TGA_BASE_ADDR_REG		0x006c
+#define	TGA_VALID_REG			0x0070
+#define	TGA_CURSOR_XY_REG		0x0074
+#define	TGA_INTR_STAT_REG		0x007c
+#define TGA_DATA_REG			0x0080
+#define	TGA_RAMDAC_SETUP_REG		0x00c0
+#define	TGA_BLOCK_COLOR0_REG		0x0140
+#define	TGA_BLOCK_COLOR1_REG		0x0144
+#define	TGA_BLOCK_COLOR2_REG		0x0148
+#define	TGA_BLOCK_COLOR3_REG		0x014c
+#define	TGA_BLOCK_COLOR4_REG		0x0150
+#define	TGA_BLOCK_COLOR5_REG		0x0154
+#define	TGA_BLOCK_COLOR6_REG		0x0158
+#define	TGA_BLOCK_COLOR7_REG		0x015c
+#define TGA_COPY64_SRC			0x0160
+#define TGA_COPY64_DST			0x0164
+#define	TGA_CLOCK_REG			0x01e8
+#define	TGA_RAMDAC_REG			0x01f0
+#define	TGA_CMD_STAT_REG		0x01f8
+
+
+/* 
+ * Useful defines for managing the registers
+ */
+
+#define TGA_HORIZ_ODD			0x80000000
+#define TGA_HORIZ_POLARITY		0x40000000
+#define TGA_HORIZ_ACT_MSB		0x30000000
+#define TGA_HORIZ_BP			0x0fe00000
+#define TGA_HORIZ_SYNC			0x001fc000
+#define TGA_HORIZ_FP			0x00007c00
+#define TGA_HORIZ_ACT_LSB		0x000001ff
+
+#define TGA_VERT_SE			0x80000000
+#define TGA_VERT_POLARITY		0x40000000
+#define TGA_VERT_RESERVED		0x30000000
+#define TGA_VERT_BP			0x0fc00000
+#define TGA_VERT_SYNC			0x003f0000
+#define TGA_VERT_FP			0x0000f800
+#define TGA_VERT_ACTIVE			0x000007ff
+
+#define TGA_VALID_VIDEO			0x01
+#define TGA_VALID_BLANK			0x02
+#define TGA_VALID_CURSOR		0x04
+
+#define TGA_MODE_SBM_8BPP		0x000
+#define TGA_MODE_SBM_24BPP		0x300
+
+#define TGA_MODE_SIMPLE			0x00
+#define TGA_MODE_SIMPLEZ		0x10
+#define TGA_MODE_OPAQUE_STIPPLE		0x01
+#define TGA_MODE_OPAQUE_FILL		0x21
+#define TGA_MODE_TRANSPARENT_STIPPLE	0x03
+#define TGA_MODE_TRANSPARENT_FILL	0x23
+#define TGA_MODE_BLOCK_STIPPLE		0x0d
+#define TGA_MODE_BLOCK_FILL		0x2d
+#define TGA_MODE_COPY			0x07
+#define TGA_MODE_DMA_READ_COPY_ND	0x17
+#define TGA_MODE_DMA_READ_COPY_D	0x37
+#define TGA_MODE_DMA_WRITE_COPY		0x1f
+
+
+/*
+ * Useful defines for managing the ICS1562 PLL clock
+ */
+
+#define TGA_PLL_BASE_FREQ 		14318		/* .18 */
+#define TGA_PLL_MAX_FREQ 		230000
+
+
+/*
+ * Useful defines for managing the BT485 on the 8-plane TGA
+ */
+
+#define	BT485_READ_BIT			0x01
+#define	BT485_WRITE_BIT			0x00
+
+#define	BT485_ADDR_PAL_WRITE		0x00
+#define	BT485_DATA_PAL			0x02
+#define	BT485_PIXEL_MASK		0x04
+#define	BT485_ADDR_PAL_READ		0x06
+#define	BT485_ADDR_CUR_WRITE		0x08
+#define	BT485_DATA_CUR			0x0a
+#define	BT485_CMD_0			0x0c
+#define	BT485_ADDR_CUR_READ		0x0e
+#define	BT485_CMD_1			0x10
+#define	BT485_CMD_2			0x12
+#define	BT485_STATUS			0x14
+#define	BT485_CMD_3			0x14
+#define	BT485_CUR_RAM			0x16
+#define	BT485_CUR_LOW_X			0x18
+#define	BT485_CUR_HIGH_X		0x1a
+#define	BT485_CUR_LOW_Y			0x1c
+#define	BT485_CUR_HIGH_Y		0x1e
+
+
+/*
+ * Useful defines for managing the BT463 on the 24-plane TGAs/SFB+s
+ */
+
+#define	BT463_ADDR_LO		0x0
+#define	BT463_ADDR_HI		0x1
+#define	BT463_REG_ACC		0x2
+#define	BT463_PALETTE		0x3
+
+#define	BT463_CUR_CLR_0		0x0100
+#define	BT463_CUR_CLR_1		0x0101
+
+#define	BT463_CMD_REG_0		0x0201
+#define	BT463_CMD_REG_1		0x0202
+#define	BT463_CMD_REG_2		0x0203
+
+#define	BT463_READ_MASK_0	0x0205
+#define	BT463_READ_MASK_1	0x0206
+#define	BT463_READ_MASK_2	0x0207
+#define	BT463_READ_MASK_3	0x0208
+
+#define	BT463_BLINK_MASK_0	0x0209
+#define	BT463_BLINK_MASK_1	0x020a
+#define	BT463_BLINK_MASK_2	0x020b
+#define	BT463_BLINK_MASK_3	0x020c
+
+#define	BT463_WINDOW_TYPE_BASE	0x0300
+
+/*
+ * Useful defines for managing the BT459 on the 8-plane SFB+s
+ */
+
+#define	BT459_ADDR_LO		0x0
+#define	BT459_ADDR_HI		0x1
+#define	BT459_REG_ACC		0x2
+#define	BT459_PALETTE		0x3
+
+#define	BT459_CUR_CLR_1		0x0181
+#define	BT459_CUR_CLR_2		0x0182
+#define	BT459_CUR_CLR_3		0x0183
+
+#define	BT459_CMD_REG_0		0x0201
+#define	BT459_CMD_REG_1		0x0202
+#define	BT459_CMD_REG_2		0x0203
+
+#define	BT459_READ_MASK		0x0204
+
+#define	BT459_BLINK_MASK	0x0206
+
+#define	BT459_CUR_CMD_REG	0x0300
+
+/*
+ * The framebuffer driver private data.
+ */
+
+struct tga_par {
+	/* PCI/TC device.  */
+	struct device *dev;
+
+	/* Device dependent information.  */
+	void __iomem *tga_mem_base;
+	void __iomem *tga_fb_base;
+	void __iomem *tga_regs_base;
+	u8 tga_type;				/* TGA_TYPE_XXX */
+	u8 tga_chip_rev;			/* dc21030 revision */
+
+	/* Remember blank mode.  */
+	u8 vesa_blanked;
+
+	/* Define the video mode.  */
+	u32 xres, yres;			/* resolution in pixels */
+	u32 htimings;			/* horizontal timing register */
+	u32 vtimings;			/* vertical timing register */
+	u32 pll_freq;			/* pixclock in mhz */
+	u32 bits_per_pixel;		/* bits per pixel */
+	u32 sync_on_green;		/* set if sync is on green */
+	u32 palette[16];
+};
+
+
+/*
+ * Macros for reading/writing TGA and RAMDAC registers
+ */
+
+static inline void
+TGA_WRITE_REG(struct tga_par *par, u32 v, u32 r)
+{
+	writel(v, par->tga_regs_base +r);
+}
+
+static inline u32
+TGA_READ_REG(struct tga_par *par, u32 r)
+{
+	return readl(par->tga_regs_base +r);
+}
+
+static inline void
+BT485_WRITE(struct tga_par *par, u8 v, u8 r)
+{
+	TGA_WRITE_REG(par, r, TGA_RAMDAC_SETUP_REG);
+	TGA_WRITE_REG(par, v | (r << 8), TGA_RAMDAC_REG);
+}
+
+static inline void
+BT463_LOAD_ADDR(struct tga_par *par, u16 a)
+{
+	TGA_WRITE_REG(par, BT463_ADDR_LO<<2, TGA_RAMDAC_SETUP_REG);
+	TGA_WRITE_REG(par, (BT463_ADDR_LO<<10) | (a & 0xff), TGA_RAMDAC_REG);
+	TGA_WRITE_REG(par, BT463_ADDR_HI<<2, TGA_RAMDAC_SETUP_REG);
+	TGA_WRITE_REG(par, (BT463_ADDR_HI<<10) | (a >> 8), TGA_RAMDAC_REG);
+}
+
+static inline void
+BT463_WRITE(struct tga_par *par, u32 m, u16 a, u8 v)
+{
+	BT463_LOAD_ADDR(par, a);
+	TGA_WRITE_REG(par, m << 2, TGA_RAMDAC_SETUP_REG);
+	TGA_WRITE_REG(par, m << 10 | v, TGA_RAMDAC_REG);
+}
+
+static inline void
+BT459_LOAD_ADDR(struct tga_par *par, u16 a)
+{
+	TGA_WRITE_REG(par, BT459_ADDR_LO << 2, TGA_RAMDAC_SETUP_REG);
+	TGA_WRITE_REG(par, a & 0xff, TGA_RAMDAC_REG);
+	TGA_WRITE_REG(par, BT459_ADDR_HI << 2, TGA_RAMDAC_SETUP_REG);
+	TGA_WRITE_REG(par, a >> 8, TGA_RAMDAC_REG);
+}
+
+static inline void
+BT459_WRITE(struct tga_par *par, u32 m, u16 a, u8 v)
+{
+	BT459_LOAD_ADDR(par, a);
+	TGA_WRITE_REG(par, m << 2, TGA_RAMDAC_SETUP_REG);
+	TGA_WRITE_REG(par, v, TGA_RAMDAC_REG);
+}
+
+#endif /* TGAFB_H */
diff --git a/include/video/trident.h b/include/video/trident.h
new file mode 100644
index 00000000..b6ce19d1
--- /dev/null
+++ b/include/video/trident.h
@@ -0,0 +1,146 @@
+
+#ifndef TRIDENTFB_DEBUG
+#define TRIDENTFB_DEBUG 0
+#endif
+
+#if TRIDENTFB_DEBUG
+#define debug(f, a...)	printk("%s:" f,  __func__ , ## a);
+#else
+#define debug(f, a...)
+#endif
+
+#define output(f, a...) pr_info("tridentfb: " f, ## a)
+
+#define Kb	(1024)
+#define Mb	(Kb*Kb)
+
+/* PCI IDS of supported cards temporarily here */
+
+#define CYBER9320	0x9320
+#define CYBER9388	0x9388
+#define CYBER9382	0x9382		/* the real PCI id for this is 9660 */
+#define CYBER9385	0x9385		/* ditto */		
+#define CYBER9397	0x9397
+#define CYBER9397DVD	0x939A
+#define CYBER9520	0x9520
+#define CYBER9525DVD	0x9525
+#define TGUI9440	0x9440
+#define TGUI9660	0x9660
+#define PROVIDIA9685	0x9685
+#define IMAGE975	0x9750
+#define IMAGE985	0x9850
+#define BLADE3D		0x9880
+#define CYBERBLADEE4	0x9540
+#define CYBERBLADEi7	0x8400
+#define CYBERBLADEi7D	0x8420
+#define CYBERBLADEi1	0x8500
+#define CYBERBLADEi1D	0x8520
+#define CYBERBLADEAi1	0x8600
+#define CYBERBLADEAi1D	0x8620
+#define CYBERBLADEXPAi1 0x8820
+#define CYBERBLADEXPm8  0x9910
+#define CYBERBLADEXPm16 0x9930
+
+/* these defines are for 'lcd' variable */
+#define LCD_STRETCH	0
+#define LCD_CENTER	1
+#define LCD_BIOS	2
+
+/* General Registers */
+#define SPR	0x1F		/* Software Programming Register (videoram) */
+
+/* 3C4 */
+#define RevisionID 0x09
+#define OldOrNew 0x0B	
+#define ConfPort1 0x0C
+#define ConfPort2 0x0C
+#define NewMode2 0x0D
+#define NewMode1 0x0E
+#define Protection 0x11
+#define MCLKLow 0x16
+#define MCLKHigh 0x17
+#define ClockLow 0x18
+#define ClockHigh 0x19
+#define SSetup 0x20
+#define SKey 0x37
+#define SPKey 0x57
+
+/* 3x4 */
+#define CRTCModuleTest 0x1E
+#define FIFOControl 0x20
+#define LinearAddReg 0x21
+#define DRAMTiming 0x23
+#define New32 0x23
+#define RAMDACTiming 0x25
+#define CRTHiOrd 0x27
+#define AddColReg 0x29
+#define InterfaceSel 0x2A
+#define HorizOverflow 0x2B
+#define GETest 0x2D
+#define Performance 0x2F
+#define GraphEngReg 0x36
+#define I2C 0x37
+#define PixelBusReg 0x38
+#define PCIReg 0x39
+#define DRAMControl 0x3A
+#define MiscContReg 0x3C
+#define CursorXLow 0x40
+#define CursorXHigh 0x41
+#define CursorYLow 0x42
+#define CursorYHigh 0x43
+#define CursorLocLow 0x44
+#define CursorLocHigh 0x45
+#define CursorXOffset 0x46
+#define CursorYOffset 0x47
+#define CursorFG1 0x48
+#define CursorFG2 0x49
+#define CursorFG3 0x4A
+#define CursorFG4 0x4B
+#define CursorBG1 0x4C
+#define CursorBG2 0x4D
+#define CursorBG3 0x4E
+#define CursorBG4 0x4F
+#define CursorControl 0x50
+#define PCIRetry 0x55
+#define PreEndControl 0x56
+#define PreEndFetch 0x57
+#define PCIMaster 0x60
+#define Enhancement0 0x62
+#define NewEDO 0x64
+#define TVinterface 0xC0
+#define TVMode 0xC1
+#define ClockControl 0xCF
+
+
+/* 3CE */
+#define MiscExtFunc 0x0F
+#define PowerStatus 0x23
+#define MiscIntContReg 0x2F
+#define CyberControl 0x30
+#define CyberEnhance 0x31
+#define FPConfig     0x33
+#define VertStretch  0x52
+#define HorStretch   0x53
+#define BiosMode     0x5c
+#define BiosReg      0x5d
+
+/* Graphics Engine */
+#define STATUS	0x2120
+#define OLDCMD	0x2124
+#define DRAWFL	0x2128
+#define OLDCLR	0x212C
+#define OLDDST	0x2138
+#define OLDSRC	0x213C
+#define OLDDIM	0x2140
+#define CMD	0x2144
+#define ROP	0x2148
+#define COLOR	0x2160
+#define BGCOLOR	0x2164
+#define SRC1	0x2100
+#define SRC2	0x2104
+#define DST1	0x2108
+#define DST2	0x210C
+
+#define ROP_S	0xCC
+#define ROP_P	0xF0
+#define ROP_X	0x66
diff --git a/include/video/udlfb.h b/include/video/udlfb.h
new file mode 100644
index 00000000..f9466fa5
--- /dev/null
+++ b/include/video/udlfb.h
@@ -0,0 +1,97 @@
+#ifndef UDLFB_H
+#define UDLFB_H
+
+/*
+ * TODO: Propose standard fb.h ioctl for reporting damage,
+ * using _IOWR() and one of the existing area structs from fb.h
+ * Consider these ioctls deprecated, but they're still used by the
+ * DisplayLink X server as yet - need both to be modified in tandem
+ * when new ioctl(s) are ready.
+ */
+#define DLFB_IOCTL_RETURN_EDID	 0xAD
+#define DLFB_IOCTL_REPORT_DAMAGE 0xAA
+struct dloarea {
+	int x, y;
+	int w, h;
+	int x2, y2;
+};
+
+struct urb_node {
+	struct list_head entry;
+	struct dlfb_data *dev;
+	struct delayed_work release_urb_work;
+	struct urb *urb;
+};
+
+struct urb_list {
+	struct list_head list;
+	spinlock_t lock;
+	struct semaphore limit_sem;
+	int available;
+	int count;
+	size_t size;
+};
+
+struct dlfb_data {
+	struct usb_device *udev;
+	struct device *gdev; /* &udev->dev */
+	struct fb_info *info;
+	struct urb_list urbs;
+	struct kref kref;
+	char *backing_buffer;
+	int fb_count;
+	bool virtualized; /* true when physical usb device not present */
+	struct delayed_work init_framebuffer_work;
+	struct delayed_work free_framebuffer_work;
+	atomic_t usb_active; /* 0 = update virtual buffer, but no usb traffic */
+	atomic_t lost_pixels; /* 1 = a render op failed. Need screen refresh */
+	char *edid; /* null until we read edid from hw or get from sysfs */
+	size_t edid_size;
+	int sku_pixel_limit;
+	int base16;
+	int base8;
+	u32 pseudo_palette[256];
+	int blank_mode; /*one of FB_BLANK_ */
+	/* blit-only rendering path metrics, exposed through sysfs */
+	atomic_t bytes_rendered; /* raw pixel-bytes driver asked to render */
+	atomic_t bytes_identical; /* saved effort with backbuffer comparison */
+	atomic_t bytes_sent; /* to usb, after compression including overhead */
+	atomic_t cpu_kcycles_used; /* transpired during pixel processing */
+};
+
+#define NR_USB_REQUEST_I2C_SUB_IO 0x02
+#define NR_USB_REQUEST_CHANNEL 0x12
+
+/* -BULK_SIZE as per usb-skeleton. Can we get full page and avoid overhead? */
+#define BULK_SIZE 512
+#define MAX_TRANSFER (PAGE_SIZE*16 - BULK_SIZE)
+#define WRITES_IN_FLIGHT (4)
+
+#define MAX_VENDOR_DESCRIPTOR_SIZE 256
+
+#define GET_URB_TIMEOUT	HZ
+#define FREE_URB_TIMEOUT (HZ*2)
+
+#define BPP                     2
+#define MAX_CMD_PIXELS		255
+
+#define RLX_HEADER_BYTES	7
+#define MIN_RLX_PIX_BYTES       4
+#define MIN_RLX_CMD_BYTES	(RLX_HEADER_BYTES + MIN_RLX_PIX_BYTES)
+
+#define RLE_HEADER_BYTES	6
+#define MIN_RLE_PIX_BYTES	3
+#define MIN_RLE_CMD_BYTES	(RLE_HEADER_BYTES + MIN_RLE_PIX_BYTES)
+
+#define RAW_HEADER_BYTES	6
+#define MIN_RAW_PIX_BYTES	2
+#define MIN_RAW_CMD_BYTES	(RAW_HEADER_BYTES + MIN_RAW_PIX_BYTES)
+
+#define DL_DEFIO_WRITE_DELAY    5 /* fb_deferred_io.delay in jiffies */
+#define DL_DEFIO_WRITE_DISABLE  (HZ*60) /* "disable" with long delay */
+
+/* remove these once align.h patch is taken into kernel */
+#define DL_ALIGN_UP(x, a) ALIGN(x, a)
+#define DL_ALIGN_DOWN(x, a) ALIGN(x-(a-1), a)
+
+#endif
diff --git a/include/video/uvesafb.h b/include/video/uvesafb.h
new file mode 100644
index 00000000..0993a220
--- /dev/null
+++ b/include/video/uvesafb.h
@@ -0,0 +1,195 @@
+#ifndef _UVESAFB_H
+#define _UVESAFB_H
+
+#include <linux/types.h>
+
+struct v86_regs {
+	__u32 ebx;
+	__u32 ecx;
+	__u32 edx;
+	__u32 esi;
+	__u32 edi;
+	__u32 ebp;
+	__u32 eax;
+	__u32 eip;
+	__u32 eflags;
+	__u32 esp;
+	__u16 cs;
+	__u16 ss;
+	__u16 es;
+	__u16 ds;
+	__u16 fs;
+	__u16 gs;
+};
+
+/* Task flags */
+#define TF_VBEIB	0x01
+#define TF_BUF_ESDI	0x02
+#define TF_BUF_ESBX	0x04
+#define TF_BUF_RET	0x08
+#define TF_EXIT		0x10
+
+struct uvesafb_task {
+	__u8 flags;
+	int buf_len;
+	struct v86_regs regs;
+};
+
+/* Constants for the capabilities field
+ * in vbe_ib */
+#define VBE_CAP_CAN_SWITCH_DAC	0x01
+#define VBE_CAP_VGACOMPAT	0x02
+
+/* The VBE Info Block */
+struct vbe_ib {
+	char  vbe_signature[4];
+	__u16 vbe_version;
+	__u32 oem_string_ptr;
+	__u32 capabilities;
+	__u32 mode_list_ptr;
+	__u16 total_memory;
+	__u16 oem_software_rev;
+	__u32 oem_vendor_name_ptr;
+	__u32 oem_product_name_ptr;
+	__u32 oem_product_rev_ptr;
+	__u8  reserved[222];
+	char  oem_data[256];
+	char  misc_data[512];
+} __attribute__ ((packed));
+
+#ifdef __KERNEL__
+
+/* VBE CRTC Info Block */
+struct vbe_crtc_ib {
+	u16 horiz_total;
+	u16 horiz_start;
+	u16 horiz_end;
+	u16 vert_total;
+	u16 vert_start;
+	u16 vert_end;
+	u8  flags;
+	u32 pixel_clock;
+	u16 refresh_rate;
+	u8  reserved[40];
+} __attribute__ ((packed));
+
+#define VBE_MODE_VGACOMPAT	0x20
+#define VBE_MODE_COLOR		0x08
+#define VBE_MODE_SUPPORTEDHW	0x01
+#define VBE_MODE_GRAPHICS	0x10
+#define VBE_MODE_LFB		0x80
+
+#define VBE_MODE_MASK		(VBE_MODE_COLOR | VBE_MODE_SUPPORTEDHW | \
+				VBE_MODE_GRAPHICS | VBE_MODE_LFB)
+
+/* VBE Mode Info Block */
+struct vbe_mode_ib {
+	/* for all VBE revisions */
+	u16 mode_attr;
+	u8  winA_attr;
+	u8  winB_attr;
+	u16 win_granularity;
+	u16 win_size;
+	u16 winA_seg;
+	u16 winB_seg;
+	u32 win_func_ptr;
+	u16 bytes_per_scan_line;
+
+	/* for VBE 1.2+ */
+	u16 x_res;
+	u16 y_res;
+	u8  x_char_size;
+	u8  y_char_size;
+	u8  planes;
+	u8  bits_per_pixel;
+	u8  banks;
+	u8  memory_model;
+	u8  bank_size;
+	u8  image_pages;
+	u8  reserved1;
+
+	/* Direct color fields for direct/6 and YUV/7 memory models. */
+	/* Offsets are bit positions of lsb in the mask. */
+	u8  red_len;
+	u8  red_off;
+	u8  green_len;
+	u8  green_off;
+	u8  blue_len;
+	u8  blue_off;
+	u8  rsvd_len;
+	u8  rsvd_off;
+	u8  direct_color_info;	/* direct color mode attributes */
+
+	/* for VBE 2.0+ */
+	u32 phys_base_ptr;
+	u8  reserved2[6];
+
+	/* for VBE 3.0+ */
+	u16 lin_bytes_per_scan_line;
+	u8  bnk_image_pages;
+	u8  lin_image_pages;
+	u8  lin_red_len;
+	u8  lin_red_off;
+	u8  lin_green_len;
+	u8  lin_green_off;
+	u8  lin_blue_len;
+	u8  lin_blue_off;
+	u8  lin_rsvd_len;
+	u8  lin_rsvd_off;
+	u32 max_pixel_clock;
+	u16 mode_id;
+	u8  depth;
+} __attribute__ ((packed));
+
+#define UVESAFB_DEFAULT_MODE "640x480-16"
+
+/* How long to wait for a reply from userspace [ms] */
+#define UVESAFB_TIMEOUT 5000
+
+/* Max number of concurrent tasks */
+#define UVESAFB_TASKS_MAX 16
+
+#define dac_reg	(0x3c8)
+#define dac_val	(0x3c9)
+
+struct uvesafb_pal_entry {
+	u_char blue, green, red, pad;
+} __attribute__ ((packed));
+
+struct uvesafb_ktask {
+	struct uvesafb_task t;
+	void *buf;
+	struct completion *done;
+	u32 ack;
+};
+
+static int uvesafb_exec(struct uvesafb_ktask *tsk);
+
+#define UVESAFB_EXACT_RES	1
+#define UVESAFB_EXACT_DEPTH	2
+
+struct uvesafb_par {
+	struct vbe_ib vbe_ib;		/* VBE Info Block */
+	struct vbe_mode_ib *vbe_modes;	/* list of supported VBE modes */
+	int vbe_modes_cnt;
+
+	u8 nocrtc;
+	u8 ypan;			/* 0 - nothing, 1 - ypan, 2 - ywrap */
+	u8 pmi_setpal;			/* PMI for palette changes */
+	u16 *pmi_base;			/* protected mode interface location */
+	void *pmi_start;
+	void *pmi_pal;
+	u8 *vbe_state_orig;		/*
+					 * original hardware state, before the
+					 * driver was loaded
+					 */
+	u8 *vbe_state_saved;		/* state saved by fb_save_state */
+	int vbe_state_size;
+	atomic_t ref_count;
+
+	int mode_idx;
+	struct vbe_crtc_ib crtc;
+};
+
+#endif /* __KERNEL__ */
+#endif /* _UVESAFB_H */
diff --git a/include/video/vga.h b/include/video/vga.h
new file mode 100644
index 00000000..2b8691f7
--- /dev/null
+++ b/include/video/vga.h
@@ -0,0 +1,481 @@
+/*
+ * linux/include/video/vga.h -- standard VGA chipset interaction
+ *
+ * Copyright 1999 Jeff Garzik <jgarzik@pobox.com>
+ * 
+ * Copyright history from vga16fb.c:
+ *	Copyright 1999 Ben Pfaff and Petr Vandrovec
+ *	Based on VGA info at http://www.osdever.net/FreeVGA/home.htm 
+ *	Based on VESA framebuffer (c) 1998 Gerd Knorr
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.  
+ *
+ */
+
+#ifndef __linux_video_vga_h__
+#define __linux_video_vga_h__
+
+#include <linux/types.h>
+#include <asm/io.h>
+#ifndef CONFIG_AMIGA
+#include <asm/vga.h>
+#else
+/*
+ * FIXME
+ * Ugh, we don't have PCI space, so map readb() and friends to use Zorro space
+ * for MMIO accesses. This should make cirrusfb work again on Amiga
+ */
+#undef inb_p
+#undef inw_p
+#undef outb_p
+#undef outw
+#undef readb
+#undef writeb
+#undef writew
+#define inb_p(port)	0
+#define inw_p(port)	0
+#define outb_p(port, val)	do { } while (0)
+#define outw(port, val)		do { } while (0)
+#define readb		z_readb
+#define writeb		z_writeb
+#define writew		z_writew
+#endif
+#include <asm/byteorder.h>
+
+
+/* Some of the code below is taken from SVGAlib.  The original,
+   unmodified copyright notice for that code is below. */
+/* VGAlib version 1.2 - (c) 1993 Tommy Frandsen                    */
+/*                                                                 */
+/* This library is free software; you can redistribute it and/or   */
+/* modify it without any restrictions. This library is distributed */
+/* in the hope that it will be useful, but without any warranty.   */
+
+/* Multi-chipset support Copyright 1993 Harm Hanemaayer */
+/* partially copyrighted (C) 1993 by Hartmut Schirmer */
+
+/* VGA data register ports */
+#define VGA_CRT_DC  	0x3D5	/* CRT Controller Data Register - color emulation */
+#define VGA_CRT_DM  	0x3B5	/* CRT Controller Data Register - mono emulation */
+#define VGA_ATT_R   	0x3C1	/* Attribute Controller Data Read Register */
+#define VGA_ATT_W   	0x3C0	/* Attribute Controller Data Write Register */
+#define VGA_GFX_D   	0x3CF	/* Graphics Controller Data Register */
+#define VGA_SEQ_D   	0x3C5	/* Sequencer Data Register */
+#define VGA_MIS_R   	0x3CC	/* Misc Output Read Register */
+#define VGA_MIS_W   	0x3C2	/* Misc Output Write Register */
+#define VGA_FTC_R	0x3CA	/* Feature Control Read Register */
+#define VGA_IS1_RC  	0x3DA	/* Input Status Register 1 - color emulation */
+#define VGA_IS1_RM  	0x3BA	/* Input Status Register 1 - mono emulation */
+#define VGA_PEL_D   	0x3C9	/* PEL Data Register */
+#define VGA_PEL_MSK 	0x3C6	/* PEL mask register */
+
+/* EGA-specific registers */
+#define EGA_GFX_E0	0x3CC	/* Graphics enable processor 0 */
+#define EGA_GFX_E1	0x3CA	/* Graphics enable processor 1 */
+
+/* VGA index register ports */
+#define VGA_CRT_IC  	0x3D4	/* CRT Controller Index - color emulation */
+#define VGA_CRT_IM  	0x3B4	/* CRT Controller Index - mono emulation */
+#define VGA_ATT_IW  	0x3C0	/* Attribute Controller Index & Data Write Register */
+#define VGA_GFX_I   	0x3CE	/* Graphics Controller Index */
+#define VGA_SEQ_I   	0x3C4	/* Sequencer Index */
+#define VGA_PEL_IW  	0x3C8	/* PEL Write Index */
+#define VGA_PEL_IR  	0x3C7	/* PEL Read Index */
+
+/* standard VGA indexes max counts */
+#define VGA_CRT_C   	0x19	/* Number of CRT Controller Registers */
+#define VGA_ATT_C   	0x15	/* Number of Attribute Controller Registers */
+#define VGA_GFX_C   	0x09	/* Number of Graphics Controller Registers */
+#define VGA_SEQ_C   	0x05	/* Number of Sequencer Registers */
+#define VGA_MIS_C   	0x01	/* Number of Misc Output Register */
+
+/* VGA misc register bit masks */
+#define VGA_MIS_COLOR		0x01
+#define VGA_MIS_ENB_MEM_ACCESS	0x02
+#define VGA_MIS_DCLK_28322_720	0x04
+#define VGA_MIS_ENB_PLL_LOAD	(0x04 | 0x08)
+#define VGA_MIS_SEL_HIGH_PAGE	0x20
+
+/* VGA CRT controller register indices */
+#define VGA_CRTC_H_TOTAL	0
+#define VGA_CRTC_H_DISP		1
+#define VGA_CRTC_H_BLANK_START	2
+#define VGA_CRTC_H_BLANK_END	3
+#define VGA_CRTC_H_SYNC_START	4
+#define VGA_CRTC_H_SYNC_END	5
+#define VGA_CRTC_V_TOTAL	6
+#define VGA_CRTC_OVERFLOW	7
+#define VGA_CRTC_PRESET_ROW	8
+#define VGA_CRTC_MAX_SCAN	9
+#define VGA_CRTC_CURSOR_START	0x0A
+#define VGA_CRTC_CURSOR_END	0x0B
+#define VGA_CRTC_START_HI	0x0C
+#define VGA_CRTC_START_LO	0x0D
+#define VGA_CRTC_CURSOR_HI	0x0E
+#define VGA_CRTC_CURSOR_LO	0x0F
+#define VGA_CRTC_V_SYNC_START	0x10
+#define VGA_CRTC_V_SYNC_END	0x11
+#define VGA_CRTC_V_DISP_END	0x12
+#define VGA_CRTC_OFFSET		0x13
+#define VGA_CRTC_UNDERLINE	0x14
+#define VGA_CRTC_V_BLANK_START	0x15
+#define VGA_CRTC_V_BLANK_END	0x16
+#define VGA_CRTC_MODE		0x17
+#define VGA_CRTC_LINE_COMPARE	0x18
+#define VGA_CRTC_REGS		VGA_CRT_C
+
+/* VGA CRT controller bit masks */
+#define VGA_CR11_LOCK_CR0_CR7	0x80 /* lock writes to CR0 - CR7 */
+#define VGA_CR17_H_V_SIGNALS_ENABLED 0x80
+
+/* VGA attribute controller register indices */
+#define VGA_ATC_PALETTE0	0x00
+#define VGA_ATC_PALETTE1	0x01
+#define VGA_ATC_PALETTE2	0x02
+#define VGA_ATC_PALETTE3	0x03
+#define VGA_ATC_PALETTE4	0x04
+#define VGA_ATC_PALETTE5	0x05
+#define VGA_ATC_PALETTE6	0x06
+#define VGA_ATC_PALETTE7	0x07
+#define VGA_ATC_PALETTE8	0x08
+#define VGA_ATC_PALETTE9	0x09
+#define VGA_ATC_PALETTEA	0x0A
+#define VGA_ATC_PALETTEB	0x0B
+#define VGA_ATC_PALETTEC	0x0C
+#define VGA_ATC_PALETTED	0x0D
+#define VGA_ATC_PALETTEE	0x0E
+#define VGA_ATC_PALETTEF	0x0F
+#define VGA_ATC_MODE		0x10
+#define VGA_ATC_OVERSCAN	0x11
+#define VGA_ATC_PLANE_ENABLE	0x12
+#define VGA_ATC_PEL		0x13
+#define VGA_ATC_COLOR_PAGE	0x14
+
+#define VGA_AR_ENABLE_DISPLAY	0x20
+
+/* VGA sequencer register indices */
+#define VGA_SEQ_RESET		0x00
+#define VGA_SEQ_CLOCK_MODE	0x01
+#define VGA_SEQ_PLANE_WRITE	0x02
+#define VGA_SEQ_CHARACTER_MAP	0x03
+#define VGA_SEQ_MEMORY_MODE	0x04
+
+/* VGA sequencer register bit masks */
+#define VGA_SR01_CHAR_CLK_8DOTS	0x01 /* bit 0: character clocks 8 dots wide are generated */
+#define VGA_SR01_SCREEN_OFF	0x20 /* bit 5: Screen is off */
+#define VGA_SR02_ALL_PLANES	0x0F /* bits 3-0: enable access to all planes */
+#define VGA_SR04_EXT_MEM	0x02 /* bit 1: allows complete mem access to 256K */
+#define VGA_SR04_SEQ_MODE	0x04 /* bit 2: directs system to use a sequential addressing mode */
+#define VGA_SR04_CHN_4M		0x08 /* bit 3: selects modulo 4 addressing for CPU access to display memory */
+
+/* VGA graphics controller register indices */
+#define VGA_GFX_SR_VALUE	0x00
+#define VGA_GFX_SR_ENABLE	0x01
+#define VGA_GFX_COMPARE_VALUE	0x02
+#define VGA_GFX_DATA_ROTATE	0x03
+#define VGA_GFX_PLANE_READ	0x04
+#define VGA_GFX_MODE		0x05
+#define VGA_GFX_MISC		0x06
+#define VGA_GFX_COMPARE_MASK	0x07
+#define VGA_GFX_BIT_MASK	0x08
+
+/* VGA graphics controller bit masks */
+#define VGA_GR06_GRAPHICS_MODE	0x01
+
+/* macro for composing an 8-bit VGA register index and value
+ * into a single 16-bit quantity */
+#define VGA_OUT16VAL(v, r)       (((v) << 8) | (r))
+
+/* decide whether we should enable the faster 16-bit VGA register writes */
+#ifdef __LITTLE_ENDIAN
+#define VGA_OUTW_WRITE
+#endif
+
+/* VGA State Save and Restore */
+#define VGA_SAVE_FONT0 1  /* save/restore plane 2 fonts	  */
+#define VGA_SAVE_FONT1 2  /* save/restore plane 3 fonts   */
+#define VGA_SAVE_TEXT  4  /* save/restore plane 0/1 fonts */
+#define VGA_SAVE_FONTS 7  /* save/restore all fonts	  */
+#define VGA_SAVE_MODE  8  /* save/restore video mode 	  */
+#define VGA_SAVE_CMAP  16 /* save/restore color map/DAC   */
+
+struct vgastate {
+	void __iomem *vgabase;	/* mmio base, if supported 		   */
+	unsigned long membase;	/* VGA window base, 0 for default - 0xA000 */
+	__u32 memsize;		/* VGA window size, 0 for default 64K	   */
+	__u32 flags;		/* what state[s] to save (see VGA_SAVE_*)  */
+	__u32 depth;		/* current fb depth, not important	   */
+	__u32 num_attr;		/* number of att registers, 0 for default  */
+	__u32 num_crtc;		/* number of crt registers, 0 for default  */
+	__u32 num_gfx;		/* number of gfx registers, 0 for default  */
+	__u32 num_seq;		/* number of seq registers, 0 for default  */
+	void *vidstate;
+};	
+
+extern int save_vga(struct vgastate *state);
+extern int restore_vga(struct vgastate *state);
+
+/*
+ * generic VGA port read/write
+ */
+ 
+static inline unsigned char vga_io_r (unsigned short port)
+{
+	return inb_p(port);
+}
+
+static inline void vga_io_w (unsigned short port, unsigned char val)
+{
+	outb_p(val, port);
+}
+
+static inline void vga_io_w_fast (unsigned short port, unsigned char reg,
+				  unsigned char val)
+{
+	outw(VGA_OUT16VAL (val, reg), port);
+}
+
+static inline unsigned char vga_mm_r (void __iomem *regbase, unsigned short port)
+{
+	return readb (regbase + port);
+}
+
+static inline void vga_mm_w (void __iomem *regbase, unsigned short port, unsigned char val)
+{
+	writeb (val, regbase + port);
+}
+
+static inline void vga_mm_w_fast (void __iomem *regbase, unsigned short port,
+				  unsigned char reg, unsigned char val)
+{
+	writew (VGA_OUT16VAL (val, reg), regbase + port);
+}
+
+static inline unsigned char vga_r (void __iomem *regbase, unsigned short port)
+{
+	if (regbase)
+		return vga_mm_r (regbase, port);
+	else
+		return vga_io_r (port);
+}
+
+static inline void vga_w (void __iomem *regbase, unsigned short port, unsigned char val)
+{
+	if (regbase)
+		vga_mm_w (regbase, port, val);
+	else
+		vga_io_w (port, val);
+}
+
+
+static inline void vga_w_fast (void __iomem *regbase, unsigned short port,
+			       unsigned char reg, unsigned char val)
+{
+	if (regbase)
+		vga_mm_w_fast (regbase, port, reg, val);
+	else
+		vga_io_w_fast (port, reg, val);
+}
+
+
+/*
+ * VGA CRTC register read/write
+ */
+ 
+static inline unsigned char vga_rcrt (void __iomem *regbase, unsigned char reg)
+{
+        vga_w (regbase, VGA_CRT_IC, reg);
+        return vga_r (regbase, VGA_CRT_DC);
+}
+
+static inline void vga_wcrt (void __iomem *regbase, unsigned char reg, unsigned char val)
+{
+#ifdef VGA_OUTW_WRITE
+	vga_w_fast (regbase, VGA_CRT_IC, reg, val);
+#else
+        vga_w (regbase, VGA_CRT_IC, reg);
+        vga_w (regbase, VGA_CRT_DC, val);
+#endif /* VGA_OUTW_WRITE */
+}
+
+static inline unsigned char vga_io_rcrt (unsigned char reg)
+{
+        vga_io_w (VGA_CRT_IC, reg);
+        return vga_io_r (VGA_CRT_DC);
+}
+
+static inline void vga_io_wcrt (unsigned char reg, unsigned char val)
+{
+#ifdef VGA_OUTW_WRITE
+	vga_io_w_fast (VGA_CRT_IC, reg, val);
+#else
+        vga_io_w (VGA_CRT_IC, reg);
+        vga_io_w (VGA_CRT_DC, val);
+#endif /* VGA_OUTW_WRITE */
+}
+
+static inline unsigned char vga_mm_rcrt (void __iomem *regbase, unsigned char reg)
+{
+        vga_mm_w (regbase, VGA_CRT_IC, reg);
+        return vga_mm_r (regbase, VGA_CRT_DC);
+}
+
+static inline void vga_mm_wcrt (void __iomem *regbase, unsigned char reg, unsigned char val)
+{
+#ifdef VGA_OUTW_WRITE
+	vga_mm_w_fast (regbase, VGA_CRT_IC, reg, val);
+#else
+        vga_mm_w (regbase, VGA_CRT_IC, reg);
+        vga_mm_w (regbase, VGA_CRT_DC, val);
+#endif /* VGA_OUTW_WRITE */
+}
+
+
+/*
+ * VGA sequencer register read/write
+ */
+ 
+static inline unsigned char vga_rseq (void __iomem *regbase, unsigned char reg)
+{
+        vga_w (regbase, VGA_SEQ_I, reg);
+        return vga_r (regbase, VGA_SEQ_D);
+}
+
+static inline void vga_wseq (void __iomem *regbase, unsigned char reg, unsigned char val)
+{
+#ifdef VGA_OUTW_WRITE
+	vga_w_fast (regbase, VGA_SEQ_I, reg, val);
+#else
+        vga_w (regbase, VGA_SEQ_I, reg);
+        vga_w (regbase, VGA_SEQ_D, val);
+#endif /* VGA_OUTW_WRITE */
+}
+
+static inline unsigned char vga_io_rseq (unsigned char reg)
+{
+        vga_io_w (VGA_SEQ_I, reg);
+        return vga_io_r (VGA_SEQ_D);
+}
+
+static inline void vga_io_wseq (unsigned char reg, unsigned char val)
+{
+#ifdef VGA_OUTW_WRITE
+	vga_io_w_fast (VGA_SEQ_I, reg, val);
+#else
+        vga_io_w (VGA_SEQ_I, reg);
+        vga_io_w (VGA_SEQ_D, val);
+#endif /* VGA_OUTW_WRITE */
+}
+
+static inline unsigned char vga_mm_rseq (void __iomem *regbase, unsigned char reg)
+{
+        vga_mm_w (regbase, VGA_SEQ_I, reg);
+        return vga_mm_r (regbase, VGA_SEQ_D);
+}
+
+static inline void vga_mm_wseq (void __iomem *regbase, unsigned char reg, unsigned char val)
+{
+#ifdef VGA_OUTW_WRITE
+	vga_mm_w_fast (regbase, VGA_SEQ_I, reg, val);
+#else
+        vga_mm_w (regbase, VGA_SEQ_I, reg);
+        vga_mm_w (regbase, VGA_SEQ_D, val);
+#endif /* VGA_OUTW_WRITE */
+}
+
+/*
+ * VGA graphics controller register read/write
+ */
+ 
+static inline unsigned char vga_rgfx (void __iomem *regbase, unsigned char reg)
+{
+        vga_w (regbase, VGA_GFX_I, reg);
+        return vga_r (regbase, VGA_GFX_D);
+}
+
+static inline void vga_wgfx (void __iomem *regbase, unsigned char reg, unsigned char val)
+{
+#ifdef VGA_OUTW_WRITE
+	vga_w_fast (regbase, VGA_GFX_I, reg, val);
+#else
+        vga_w (regbase, VGA_GFX_I, reg);
+        vga_w (regbase, VGA_GFX_D, val);
+#endif /* VGA_OUTW_WRITE */
+}
+
+static inline unsigned char vga_io_rgfx (unsigned char reg)
+{
+        vga_io_w (VGA_GFX_I, reg);
+        return vga_io_r (VGA_GFX_D);
+}
+
+static inline void vga_io_wgfx (unsigned char reg, unsigned char val)
+{
+#ifdef VGA_OUTW_WRITE
+	vga_io_w_fast (VGA_GFX_I, reg, val);
+#else
+        vga_io_w (VGA_GFX_I, reg);
+        vga_io_w (VGA_GFX_D, val);
+#endif /* VGA_OUTW_WRITE */
+}
+
+static inline unsigned char vga_mm_rgfx (void __iomem *regbase, unsigned char reg)
+{
+        vga_mm_w (regbase, VGA_GFX_I, reg);
+        return vga_mm_r (regbase, VGA_GFX_D);
+}
+
+static inline void vga_mm_wgfx (void __iomem *regbase, unsigned char reg, unsigned char val)
+{
+#ifdef VGA_OUTW_WRITE
+	vga_mm_w_fast (regbase, VGA_GFX_I, reg, val);
+#else
+        vga_mm_w (regbase, VGA_GFX_I, reg);
+        vga_mm_w (regbase, VGA_GFX_D, val);
+#endif /* VGA_OUTW_WRITE */
+}
+
+
+/*
+ * VGA attribute controller register read/write
+ */
+ 
+static inline unsigned char vga_rattr (void __iomem *regbase, unsigned char reg)
+{
+        vga_w (regbase, VGA_ATT_IW, reg);
+        return vga_r (regbase, VGA_ATT_R);
+}
+
+static inline void vga_wattr (void __iomem *regbase, unsigned char reg, unsigned char val)
+{
+        vga_w (regbase, VGA_ATT_IW, reg);
+        vga_w (regbase, VGA_ATT_W, val);
+}
+
+static inline unsigned char vga_io_rattr (unsigned char reg)
+{
+        vga_io_w (VGA_ATT_IW, reg);
+        return vga_io_r (VGA_ATT_R);
+}
+
+static inline void vga_io_wattr (unsigned char reg, unsigned char val)
+{
+        vga_io_w (VGA_ATT_IW, reg);
+        vga_io_w (VGA_ATT_W, val);
+}
+
+static inline unsigned char vga_mm_rattr (void __iomem *regbase, unsigned char reg)
+{
+        vga_mm_w (regbase, VGA_ATT_IW, reg);
+        return vga_mm_r (regbase, VGA_ATT_R);
+}
+
+static inline void vga_mm_wattr (void __iomem *regbase, unsigned char reg, unsigned char val)
+{
+        vga_mm_w (regbase, VGA_ATT_IW, reg);
+        vga_mm_w (regbase, VGA_ATT_W, val);
+}
+
+#endif /* __linux_video_vga_h__ */
diff --git a/include/video/w100fb.h b/include/video/w100fb.h
new file mode 100644
index 00000000..677d4032
--- /dev/null
+++ b/include/video/w100fb.h
@@ -0,0 +1,150 @@
+/*
+ *  Support for the w100 frame buffer.
+ *
+ *  Copyright (c) 2004-2005 Richard Purdie
+ *  Copyright (c) 2005 Ian Molton
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#define W100_GPIO_PORT_A	0
+#define W100_GPIO_PORT_B	1
+
+#define CLK_SRC_XTAL  0
+#define CLK_SRC_PLL   1
+
+struct w100fb_par;
+
+unsigned long w100fb_gpio_read(int port);
+void w100fb_gpio_write(int port, unsigned long value);
+unsigned long w100fb_get_hsynclen(struct device *dev);
+
+/* LCD Specific Routines and Config */
+struct w100_tg_info {
+	void (*change)(struct w100fb_par*);
+	void (*suspend)(struct w100fb_par*);
+	void (*resume)(struct w100fb_par*);
+};
+
+/* General Platform Specific w100 Register Values */
+struct w100_gen_regs {
+	unsigned long lcd_format;
+	unsigned long lcdd_cntl1;
+	unsigned long lcdd_cntl2;
+	unsigned long genlcd_cntl1;
+	unsigned long genlcd_cntl2;
+	unsigned long genlcd_cntl3;
+};
+
+struct w100_gpio_regs {
+	unsigned long init_data1;
+	unsigned long init_data2;
+	unsigned long gpio_dir1;
+	unsigned long gpio_oe1;
+	unsigned long gpio_dir2;
+	unsigned long gpio_oe2;
+};
+
+/* Optional External Memory Configuration */
+struct w100_mem_info {
+	unsigned long ext_cntl;
+	unsigned long sdram_mode_reg;
+	unsigned long ext_timing_cntl;
+	unsigned long io_cntl;
+	unsigned int size;
+};
+
+struct w100_bm_mem_info {
+	unsigned long ext_mem_bw;
+	unsigned long offset;
+	unsigned long ext_timing_ctl;
+	unsigned long ext_cntl;
+	unsigned long mode_reg;
+	unsigned long io_cntl;
+	unsigned long config;
+};
+
+/* LCD Mode definition */
+struct w100_mode {
+	unsigned int xres;
+	unsigned int yres;
+	unsigned short left_margin;
+	unsigned short right_margin;
+	unsigned short upper_margin;
+	unsigned short lower_margin;
+	unsigned long crtc_ss;
+	unsigned long crtc_ls;
+	unsigned long crtc_gs;
+	unsigned long crtc_vpos_gs;
+	unsigned long crtc_rev;
+	unsigned long crtc_dclk;
+	unsigned long crtc_gclk;
+	unsigned long crtc_goe;
+	unsigned long crtc_ps1_active;
+	char pll_freq;
+	char fast_pll_freq;
+	int sysclk_src;
+	int sysclk_divider;
+	int pixclk_src;
+	int pixclk_divider;
+	int pixclk_divider_rotated;
+};
+
+struct w100_pll_info {
+	uint16_t freq;  /* desired Fout for PLL (Mhz) */
+	uint8_t M;      /* input divider */
+	uint8_t N_int;  /* VCO multiplier */
+	uint8_t N_fac;  /* VCO multiplier fractional part */
+	uint8_t tfgoal;
+	uint8_t lock_time;
+};
+
+/* Initial Video mode orientation flags */
+#define INIT_MODE_ROTATED  0x1
+#define INIT_MODE_FLIPPED  0x2
+
+/*
+ * This structure describes the machine which we are running on.
+ * It is set by machine specific code and used in the probe routine
+ * of drivers/video/w100fb.c
+ */
+struct w100fb_mach_info {
+	/* General Platform Specific Registers */
+	struct w100_gen_regs *regs;
+	/* Table of modes the LCD is capable of */
+	struct w100_mode *modelist;
+	unsigned int num_modes;
+	/* Hooks for any platform specific tg/lcd code (optional) */
+	struct w100_tg_info *tg;
+	/* External memory definition (if present) */
+	struct w100_mem_info *mem;
+	/* Additional External memory definition (if present) */
+	struct w100_bm_mem_info *bm_mem;
+	/* GPIO definitions (optional) */
+	struct w100_gpio_regs *gpio;
+	/* Initial Mode flags */
+	unsigned int init_mode;
+	/* Xtal Frequency */
+	unsigned int xtal_freq;
+	/* Enable Xtal input doubler (1 == enable) */
+	unsigned int xtal_dbl;
+};
+
+/* General frame buffer data structure */
+struct w100fb_par {
+	unsigned int chip_id;
+	unsigned int xres;
+	unsigned int yres;
+	unsigned int extmem_active;
+	unsigned int flip;
+	unsigned int blanked;
+	unsigned int fastpll_mode;
+	unsigned long hsync_len;
+	struct w100_mode *mode;
+	struct w100_pll_info *pll_table;
+	struct w100fb_mach_info *mach;
+	uint32_t *saved_intmem;
+	uint32_t *saved_extmem;
+};
diff --git a/include/xen/Kbuild b/include/xen/Kbuild
new file mode 100644
index 00000000..84ad8f02
--- /dev/null
+++ b/include/xen/Kbuild
@@ -0,0 +1,2 @@
+header-y += evtchn.h
+header-y += privcmd.h
diff --git a/include/xen/balloon.h b/include/xen/balloon.h
new file mode 100644
index 00000000..cc2e1a7e
--- /dev/null
+++ b/include/xen/balloon.h
@@ -0,0 +1,40 @@
+/******************************************************************************
+ * Xen balloon functionality
+ */
+
+#define RETRY_UNLIMITED	0
+
+struct balloon_stats {
+	/* We aim for 'current allocation' == 'target allocation'. */
+	unsigned long current_pages;
+	unsigned long target_pages;
+	/* Number of pages in high- and low-memory balloons. */
+	unsigned long balloon_low;
+	unsigned long balloon_high;
+	unsigned long schedule_delay;
+	unsigned long max_schedule_delay;
+	unsigned long retry_count;
+	unsigned long max_retry_count;
+#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
+	unsigned long hotplug_pages;
+	unsigned long balloon_hotplug;
+#endif
+};
+
+extern struct balloon_stats balloon_stats;
+
+void balloon_set_new_target(unsigned long target);
+
+int alloc_xenballooned_pages(int nr_pages, struct page **pages,
+		bool highmem);
+void free_xenballooned_pages(int nr_pages, struct page **pages);
+
+struct device;
+#ifdef CONFIG_XEN_SELFBALLOONING
+extern int register_xen_selfballooning(struct device *dev);
+#else
+static inline int register_xen_selfballooning(struct device *dev)
+{
+	return -ENOSYS;
+}
+#endif
diff --git a/include/xen/events.h b/include/xen/events.h
new file mode 100644
index 00000000..04399b28
--- /dev/null
+++ b/include/xen/events.h
@@ -0,0 +1,112 @@
+#ifndef _XEN_EVENTS_H
+#define _XEN_EVENTS_H
+
+#include <linux/interrupt.h>
+
+#include <xen/interface/event_channel.h>
+#include <asm/xen/hypercall.h>
+#include <asm/xen/events.h>
+
+int bind_evtchn_to_irq(unsigned int evtchn);
+int bind_evtchn_to_irqhandler(unsigned int evtchn,
+			      irq_handler_t handler,
+			      unsigned long irqflags, const char *devname,
+			      void *dev_id);
+int bind_virq_to_irq(unsigned int virq, unsigned int cpu);
+int bind_virq_to_irqhandler(unsigned int virq, unsigned int cpu,
+			    irq_handler_t handler,
+			    unsigned long irqflags, const char *devname,
+			    void *dev_id);
+int bind_ipi_to_irqhandler(enum ipi_vector ipi,
+			   unsigned int cpu,
+			   irq_handler_t handler,
+			   unsigned long irqflags,
+			   const char *devname,
+			   void *dev_id);
+int bind_interdomain_evtchn_to_irqhandler(unsigned int remote_domain,
+					  unsigned int remote_port,
+					  irq_handler_t handler,
+					  unsigned long irqflags,
+					  const char *devname,
+					  void *dev_id);
+
+/*
+ * Common unbind function for all event sources. Takes IRQ to unbind from.
+ * Automatically closes the underlying event channel (even for bindings
+ * made with bind_evtchn_to_irqhandler()).
+ */
+void unbind_from_irqhandler(unsigned int irq, void *dev_id);
+
+/*
+ * Allow extra references to event channels exposed to userspace by evtchn
+ */
+int evtchn_make_refcounted(unsigned int evtchn);
+int evtchn_get(unsigned int evtchn);
+void evtchn_put(unsigned int evtchn);
+
+void xen_send_IPI_one(unsigned int cpu, enum ipi_vector vector);
+int resend_irq_on_evtchn(unsigned int irq);
+void rebind_evtchn_irq(int evtchn, int irq);
+
+static inline void notify_remote_via_evtchn(int port)
+{
+	struct evtchn_send send = { .port = port };
+	(void)HYPERVISOR_event_channel_op(EVTCHNOP_send, &send);
+}
+
+void notify_remote_via_irq(int irq);
+
+void xen_irq_resume(void);
+
+/* Clear an irq's pending state, in preparation for polling on it */
+void xen_clear_irq_pending(int irq);
+void xen_set_irq_pending(int irq);
+bool xen_test_irq_pending(int irq);
+
+/* Poll waiting for an irq to become pending.  In the usual case, the
+   irq will be disabled so it won't deliver an interrupt. */
+void xen_poll_irq(int irq);
+
+/* Poll waiting for an irq to become pending with a timeout.  In the usual case,
+ * the irq will be disabled so it won't deliver an interrupt. */
+void xen_poll_irq_timeout(int irq, u64 timeout);
+
+/* Determine the IRQ which is bound to an event channel */
+unsigned irq_from_evtchn(unsigned int evtchn);
+
+/* Xen HVM evtchn vector callback */
+void xen_hvm_callback_vector(void);
+extern int xen_have_vector_callback;
+int xen_set_callback_via(uint64_t via);
+void xen_evtchn_do_upcall(struct pt_regs *regs);
+void xen_hvm_evtchn_do_upcall(void);
+
+/* Bind a pirq for a physical interrupt to an irq. */
+int xen_bind_pirq_gsi_to_irq(unsigned gsi,
+			     unsigned pirq, int shareable, char *name);
+
+#ifdef CONFIG_PCI_MSI
+/* Allocate a pirq for a MSI style physical interrupt. */
+int xen_allocate_pirq_msi(struct pci_dev *dev, struct msi_desc *msidesc);
+/* Bind an PSI pirq to an irq. */
+int xen_bind_pirq_msi_to_irq(struct pci_dev *dev, struct msi_desc *msidesc,
+			     int pirq, int vector, const char *name,
+			     domid_t domid);
+#endif
+
+/* De-allocates the above mentioned physical interrupt. */
+int xen_destroy_irq(int irq);
+
+/* Return irq from pirq */
+int xen_irq_from_pirq(unsigned pirq);
+
+/* Return the pirq allocated to the irq. */
+int xen_pirq_from_irq(unsigned irq);
+
+/* Return the irq allocated to the gsi */
+int xen_irq_from_gsi(unsigned gsi);
+
+/* Determine whether to ignore this IRQ if it is passed to a guest. */
+int xen_test_irq_shared(int irq);
+
+#endif	/* _XEN_EVENTS_H */
diff --git a/include/xen/evtchn.h b/include/xen/evtchn.h
new file mode 100644
index 00000000..14e833ee
--- /dev/null
+++ b/include/xen/evtchn.h
@@ -0,0 +1,88 @@
+/******************************************************************************
+ * evtchn.h
+ *
+ * Interface to /dev/xen/evtchn.
+ *
+ * Copyright (c) 2003-2005, K A Fraser
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef __LINUX_PUBLIC_EVTCHN_H__
+#define __LINUX_PUBLIC_EVTCHN_H__
+
+/*
+ * Bind a fresh port to VIRQ @virq.
+ * Return allocated port.
+ */
+#define IOCTL_EVTCHN_BIND_VIRQ				\
+	_IOC(_IOC_NONE, 'E', 0, sizeof(struct ioctl_evtchn_bind_virq))
+struct ioctl_evtchn_bind_virq {
+	unsigned int virq;
+};
+
+/*
+ * Bind a fresh port to remote <@remote_domain, @remote_port>.
+ * Return allocated port.
+ */
+#define IOCTL_EVTCHN_BIND_INTERDOMAIN			\
+	_IOC(_IOC_NONE, 'E', 1, sizeof(struct ioctl_evtchn_bind_interdomain))
+struct ioctl_evtchn_bind_interdomain {
+	unsigned int remote_domain, remote_port;
+};
+
+/*
+ * Allocate a fresh port for binding to @remote_domain.
+ * Return allocated port.
+ */
+#define IOCTL_EVTCHN_BIND_UNBOUND_PORT			\
+	_IOC(_IOC_NONE, 'E', 2, sizeof(struct ioctl_evtchn_bind_unbound_port))
+struct ioctl_evtchn_bind_unbound_port {
+	unsigned int remote_domain;
+};
+
+/*
+ * Unbind previously allocated @port.
+ */
+#define IOCTL_EVTCHN_UNBIND				\
+	_IOC(_IOC_NONE, 'E', 3, sizeof(struct ioctl_evtchn_unbind))
+struct ioctl_evtchn_unbind {
+	unsigned int port;
+};
+
+/*
+ * Unbind previously allocated @port.
+ */
+#define IOCTL_EVTCHN_NOTIFY				\
+	_IOC(_IOC_NONE, 'E', 4, sizeof(struct ioctl_evtchn_notify))
+struct ioctl_evtchn_notify {
+	unsigned int port;
+};
+
+/* Clear and reinitialise the event buffer. Clear error condition. */
+#define IOCTL_EVTCHN_RESET				\
+	_IOC(_IOC_NONE, 'E', 5, 0)
+
+#endif /* __LINUX_PUBLIC_EVTCHN_H__ */
diff --git a/include/xen/features.h b/include/xen/features.h
new file mode 100644
index 00000000..27292d4d
--- /dev/null
+++ b/include/xen/features.h
@@ -0,0 +1,23 @@
+/******************************************************************************
+ * features.h
+ *
+ * Query the features reported by Xen.
+ *
+ * Copyright (c) 2006, Ian Campbell
+ */
+
+#ifndef __XEN_FEATURES_H__
+#define __XEN_FEATURES_H__
+
+#include <xen/interface/features.h>
+
+void xen_setup_features(void);
+
+extern u8 xen_features[XENFEAT_NR_SUBMAPS * 32];
+
+static inline int xen_feature(int flag)
+{
+	return xen_features[flag];
+}
+
+#endif /* __ASM_XEN_FEATURES_H__ */
diff --git a/include/xen/gntalloc.h b/include/xen/gntalloc.h
new file mode 100644
index 00000000..76bd5806
--- /dev/null
+++ b/include/xen/gntalloc.h
@@ -0,0 +1,82 @@
+/******************************************************************************
+ * gntalloc.h
+ *
+ * Interface to /dev/xen/gntalloc.
+ *
+ * Author: Daniel De Graaf <dgdegra@tycho.nsa.gov>
+ *
+ * This file is in the public domain.
+ */
+
+#ifndef __LINUX_PUBLIC_GNTALLOC_H__
+#define __LINUX_PUBLIC_GNTALLOC_H__
+
+/*
+ * Allocates a new page and creates a new grant reference.
+ */
+#define IOCTL_GNTALLOC_ALLOC_GREF \
+_IOC(_IOC_NONE, 'G', 5, sizeof(struct ioctl_gntalloc_alloc_gref))
+struct ioctl_gntalloc_alloc_gref {
+	/* IN parameters */
+	/* The ID of the domain to be given access to the grants. */
+	uint16_t domid;
+	/* Flags for this mapping */
+	uint16_t flags;
+	/* Number of pages to map */
+	uint32_t count;
+	/* OUT parameters */
+	/* The offset to be used on a subsequent call to mmap(). */
+	uint64_t index;
+	/* The grant references of the newly created grant, one per page */
+	/* Variable size, depending on count */
+	uint32_t gref_ids[1];
+};
+
+#define GNTALLOC_FLAG_WRITABLE 1
+
+/*
+ * Deallocates the grant reference, allowing the associated page to be freed if
+ * no other domains are using it.
+ */
+#define IOCTL_GNTALLOC_DEALLOC_GREF \
+_IOC(_IOC_NONE, 'G', 6, sizeof(struct ioctl_gntalloc_dealloc_gref))
+struct ioctl_gntalloc_dealloc_gref {
+	/* IN parameters */
+	/* The offset returned in the map operation */
+	uint64_t index;
+	/* Number of references to unmap */
+	uint32_t count;
+};
+
+/*
+ * Sets up an unmap notification within the page, so that the other side can do
+ * cleanup if this side crashes. Required to implement cross-domain robust
+ * mutexes or close notification on communication channels.
+ *
+ * Each mapped page only supports one notification; multiple calls referring to
+ * the same page overwrite the previous notification. You must clear the
+ * notification prior to the IOCTL_GNTALLOC_DEALLOC_GREF if you do not want it
+ * to occur.
+ */
+#define IOCTL_GNTALLOC_SET_UNMAP_NOTIFY \
+_IOC(_IOC_NONE, 'G', 7, sizeof(struct ioctl_gntalloc_unmap_notify))
+struct ioctl_gntalloc_unmap_notify {
+	/* IN parameters */
+	/* Offset in the file descriptor for a byte within the page (same as
+	 * used in mmap). If using UNMAP_NOTIFY_CLEAR_BYTE, this is the byte to
+	 * be cleared. Otherwise, it can be any byte in the page whose
+	 * notification we are adjusting.
+	 */
+	uint64_t index;
+	/* Action(s) to take on unmap */
+	uint32_t action;
+	/* Event channel to notify */
+	uint32_t event_channel_port;
+};
+
+/* Clear (set to zero) the byte specified by index */
+#define UNMAP_NOTIFY_CLEAR_BYTE 0x1
+/* Send an interrupt on the indicated event channel */
+#define UNMAP_NOTIFY_SEND_EVENT 0x2
+
+#endif /* __LINUX_PUBLIC_GNTALLOC_H__ */
diff --git a/include/xen/gntdev.h b/include/xen/gntdev.h
new file mode 100644
index 00000000..5304bd3c
--- /dev/null
+++ b/include/xen/gntdev.h
@@ -0,0 +1,150 @@
+/******************************************************************************
+ * gntdev.h
+ * 
+ * Interface to /dev/xen/gntdev.
+ * 
+ * Copyright (c) 2007, D G Murray
+ * 
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ * 
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ * 
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ * 
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef __LINUX_PUBLIC_GNTDEV_H__
+#define __LINUX_PUBLIC_GNTDEV_H__
+
+struct ioctl_gntdev_grant_ref {
+	/* The domain ID of the grant to be mapped. */
+	uint32_t domid;
+	/* The grant reference of the grant to be mapped. */
+	uint32_t ref;
+};
+
+/*
+ * Inserts the grant references into the mapping table of an instance
+ * of gntdev. N.B. This does not perform the mapping, which is deferred
+ * until mmap() is called with @index as the offset.
+ */
+#define IOCTL_GNTDEV_MAP_GRANT_REF \
+_IOC(_IOC_NONE, 'G', 0, sizeof(struct ioctl_gntdev_map_grant_ref))
+struct ioctl_gntdev_map_grant_ref {
+	/* IN parameters */
+	/* The number of grants to be mapped. */
+	uint32_t count;
+	uint32_t pad;
+	/* OUT parameters */
+	/* The offset to be used on a subsequent call to mmap(). */
+	uint64_t index;
+	/* Variable IN parameter. */
+	/* Array of grant references, of size @count. */
+	struct ioctl_gntdev_grant_ref refs[1];
+};
+
+/*
+ * Removes the grant references from the mapping table of an instance of
+ * of gntdev. N.B. munmap() must be called on the relevant virtual address(es)
+ * before this ioctl is called, or an error will result.
+ */
+#define IOCTL_GNTDEV_UNMAP_GRANT_REF \
+_IOC(_IOC_NONE, 'G', 1, sizeof(struct ioctl_gntdev_unmap_grant_ref))
+struct ioctl_gntdev_unmap_grant_ref {
+	/* IN parameters */
+	/* The offset was returned by the corresponding map operation. */
+	uint64_t index;
+	/* The number of pages to be unmapped. */
+	uint32_t count;
+	uint32_t pad;
+};
+
+/*
+ * Returns the offset in the driver's address space that corresponds
+ * to @vaddr. This can be used to perform a munmap(), followed by an
+ * UNMAP_GRANT_REF ioctl, where no state about the offset is retained by
+ * the caller. The number of pages that were allocated at the same time as
+ * @vaddr is returned in @count.
+ *
+ * N.B. Where more than one page has been mapped into a contiguous range, the
+ *      supplied @vaddr must correspond to the start of the range; otherwise
+ *      an error will result. It is only possible to munmap() the entire
+ *      contiguously-allocated range at once, and not any subrange thereof.
+ */
+#define IOCTL_GNTDEV_GET_OFFSET_FOR_VADDR \
+_IOC(_IOC_NONE, 'G', 2, sizeof(struct ioctl_gntdev_get_offset_for_vaddr))
+struct ioctl_gntdev_get_offset_for_vaddr {
+	/* IN parameters */
+	/* The virtual address of the first mapped page in a range. */
+	uint64_t vaddr;
+	/* OUT parameters */
+	/* The offset that was used in the initial mmap() operation. */
+	uint64_t offset;
+	/* The number of pages mapped in the VM area that begins at @vaddr. */
+	uint32_t count;
+	uint32_t pad;
+};
+
+/*
+ * Sets the maximum number of grants that may mapped at once by this gntdev
+ * instance.
+ *
+ * N.B. This must be called before any other ioctl is performed on the device.
+ */
+#define IOCTL_GNTDEV_SET_MAX_GRANTS \
+_IOC(_IOC_NONE, 'G', 3, sizeof(struct ioctl_gntdev_set_max_grants))
+struct ioctl_gntdev_set_max_grants {
+	/* IN parameter */
+	/* The maximum number of grants that may be mapped at once. */
+	uint32_t count;
+};
+
+/*
+ * Sets up an unmap notification within the page, so that the other side can do
+ * cleanup if this side crashes. Required to implement cross-domain robust
+ * mutexes or close notification on communication channels.
+ *
+ * Each mapped page only supports one notification; multiple calls referring to
+ * the same page overwrite the previous notification. You must clear the
+ * notification prior to the IOCTL_GNTALLOC_DEALLOC_GREF if you do not want it
+ * to occur.
+ */
+#define IOCTL_GNTDEV_SET_UNMAP_NOTIFY \
+_IOC(_IOC_NONE, 'G', 7, sizeof(struct ioctl_gntdev_unmap_notify))
+struct ioctl_gntdev_unmap_notify {
+	/* IN parameters */
+	/* Offset in the file descriptor for a byte within the page (same as
+	 * used in mmap). If using UNMAP_NOTIFY_CLEAR_BYTE, this is the byte to
+	 * be cleared. Otherwise, it can be any byte in the page whose
+	 * notification we are adjusting.
+	 */
+	uint64_t index;
+	/* Action(s) to take on unmap */
+	uint32_t action;
+	/* Event channel to notify */
+	uint32_t event_channel_port;
+};
+
+/* Clear (set to zero) the byte specified by index */
+#define UNMAP_NOTIFY_CLEAR_BYTE 0x1
+/* Send an interrupt on the indicated event channel */
+#define UNMAP_NOTIFY_SEND_EVENT 0x2
+
+#endif /* __LINUX_PUBLIC_GNTDEV_H__ */
diff --git a/include/xen/grant_table.h b/include/xen/grant_table.h
new file mode 100644
index 00000000..15f8a00f
--- /dev/null
+++ b/include/xen/grant_table.h
@@ -0,0 +1,190 @@
+/******************************************************************************
+ * grant_table.h
+ *
+ * Two sets of functionality:
+ * 1. Granting foreign access to our memory reservation.
+ * 2. Accessing others' memory reservations via grant references.
+ * (i.e., mechanisms for both sender and recipient of grant references)
+ *
+ * Copyright (c) 2004-2005, K A Fraser
+ * Copyright (c) 2005, Christopher Clark
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef __ASM_GNTTAB_H__
+#define __ASM_GNTTAB_H__
+
+#include <asm/page.h>
+
+#include <xen/interface/xen.h>
+#include <xen/interface/grant_table.h>
+
+#include <asm/xen/hypervisor.h>
+
+#include <xen/features.h>
+
+/* NR_GRANT_FRAMES must be less than or equal to that configured in Xen */
+#define NR_GRANT_FRAMES 4
+
+struct gnttab_free_callback {
+	struct gnttab_free_callback *next;
+	void (*fn)(void *);
+	void *arg;
+	u16 count;
+};
+
+int gnttab_init(void);
+int gnttab_suspend(void);
+int gnttab_resume(void);
+
+int gnttab_grant_foreign_access(domid_t domid, unsigned long frame,
+				int readonly);
+int gnttab_grant_foreign_access_subpage(domid_t domid, unsigned long frame,
+					int flags, unsigned page_off,
+					unsigned length);
+int gnttab_grant_foreign_access_trans(domid_t domid, int flags,
+				      domid_t trans_domid,
+				      grant_ref_t trans_gref);
+
+/*
+ * Are sub-page grants available on this version of Xen?  Returns true if they
+ * are, and false if they're not.
+ */
+bool gnttab_subpage_grants_available(void);
+
+/*
+ * Are transitive grants available on this version of Xen?  Returns true if they
+ * are, and false if they're not.
+ */
+bool gnttab_trans_grants_available(void);
+
+/*
+ * End access through the given grant reference, iff the grant entry is no
+ * longer in use.  Return 1 if the grant entry was freed, 0 if it is still in
+ * use.
+ */
+int gnttab_end_foreign_access_ref(grant_ref_t ref, int readonly);
+
+/*
+ * Eventually end access through the given grant reference, and once that
+ * access has been ended, free the given page too.  Access will be ended
+ * immediately iff the grant entry is not in use, otherwise it will happen
+ * some time later.  page may be 0, in which case no freeing will occur.
+ */
+void gnttab_end_foreign_access(grant_ref_t ref, int readonly,
+			       unsigned long page);
+
+int gnttab_grant_foreign_transfer(domid_t domid, unsigned long pfn);
+
+unsigned long gnttab_end_foreign_transfer_ref(grant_ref_t ref);
+unsigned long gnttab_end_foreign_transfer(grant_ref_t ref);
+
+int gnttab_query_foreign_access(grant_ref_t ref);
+
+/*
+ * operations on reserved batches of grant references
+ */
+int gnttab_alloc_grant_references(u16 count, grant_ref_t *pprivate_head);
+
+void gnttab_free_grant_reference(grant_ref_t ref);
+
+void gnttab_free_grant_references(grant_ref_t head);
+
+int gnttab_empty_grant_references(const grant_ref_t *pprivate_head);
+
+int gnttab_claim_grant_reference(grant_ref_t *pprivate_head);
+
+void gnttab_release_grant_reference(grant_ref_t *private_head,
+				    grant_ref_t release);
+
+void gnttab_request_free_callback(struct gnttab_free_callback *callback,
+				  void (*fn)(void *), void *arg, u16 count);
+void gnttab_cancel_free_callback(struct gnttab_free_callback *callback);
+
+void gnttab_grant_foreign_access_ref(grant_ref_t ref, domid_t domid,
+				     unsigned long frame, int readonly);
+int gnttab_grant_foreign_access_subpage_ref(grant_ref_t ref, domid_t domid,
+					    unsigned long frame, int flags,
+					    unsigned page_off,
+					    unsigned length);
+int gnttab_grant_foreign_access_trans_ref(grant_ref_t ref, domid_t domid,
+					  int flags, domid_t trans_domid,
+					  grant_ref_t trans_gref);
+
+void gnttab_grant_foreign_transfer_ref(grant_ref_t, domid_t domid,
+				       unsigned long pfn);
+
+static inline void
+gnttab_set_map_op(struct gnttab_map_grant_ref *map, phys_addr_t addr,
+		  uint32_t flags, grant_ref_t ref, domid_t domid)
+{
+	if (flags & GNTMAP_contains_pte)
+		map->host_addr = addr;
+	else if (xen_feature(XENFEAT_auto_translated_physmap))
+		map->host_addr = __pa(addr);
+	else
+		map->host_addr = addr;
+
+	map->flags = flags;
+	map->ref = ref;
+	map->dom = domid;
+}
+
+static inline void
+gnttab_set_unmap_op(struct gnttab_unmap_grant_ref *unmap, phys_addr_t addr,
+		    uint32_t flags, grant_handle_t handle)
+{
+	if (flags & GNTMAP_contains_pte)
+		unmap->host_addr = addr;
+	else if (xen_feature(XENFEAT_auto_translated_physmap))
+		unmap->host_addr = __pa(addr);
+	else
+		unmap->host_addr = addr;
+
+	unmap->handle = handle;
+	unmap->dev_bus_addr = 0;
+}
+
+int arch_gnttab_map_shared(unsigned long *frames, unsigned long nr_gframes,
+			   unsigned long max_nr_gframes,
+			   void **__shared);
+int arch_gnttab_map_status(uint64_t *frames, unsigned long nr_gframes,
+			   unsigned long max_nr_gframes,
+			   grant_status_t **__shared);
+void arch_gnttab_unmap(void *shared, unsigned long nr_gframes);
+
+extern unsigned long xen_hvm_resume_frames;
+unsigned int gnttab_max_grant_frames(void);
+
+#define gnttab_map_vaddr(map) ((void *)(map.host_virt_addr))
+
+int gnttab_map_refs(struct gnttab_map_grant_ref *map_ops,
+		    struct gnttab_map_grant_ref *kmap_ops,
+		    struct page **pages, unsigned int count);
+int gnttab_unmap_refs(struct gnttab_unmap_grant_ref *unmap_ops,
+		      struct page **pages, unsigned int count, bool clear_pte);
+
+#endif /* __ASM_GNTTAB_H__ */
diff --git a/include/xen/hvc-console.h b/include/xen/hvc-console.h
new file mode 100644
index 00000000..b62dfef1
--- /dev/null
+++ b/include/xen/hvc-console.h
@@ -0,0 +1,18 @@
+#ifndef XEN_HVC_CONSOLE_H
+#define XEN_HVC_CONSOLE_H
+
+extern struct console xenboot_console;
+
+#ifdef CONFIG_HVC_XEN
+void xen_console_resume(void);
+void xen_raw_console_write(const char *str);
+__printf(1, 2)
+void xen_raw_printk(const char *fmt, ...);
+#else
+static inline void xen_console_resume(void) { }
+static inline void xen_raw_console_write(const char *str) { }
+static inline __printf(1, 2)
+void xen_raw_printk(const char *fmt, ...) { }
+#endif
+
+#endif	/* XEN_HVC_CONSOLE_H */
diff --git a/include/xen/hvm.h b/include/xen/hvm.h
new file mode 100644
index 00000000..b193fa2f
--- /dev/null
+++ b/include/xen/hvm.h
@@ -0,0 +1,30 @@
+/* Simple wrappers around HVM functions */
+#ifndef XEN_HVM_H__
+#define XEN_HVM_H__
+
+#include <xen/interface/hvm/params.h>
+#include <asm/xen/hypercall.h>
+
+static inline int hvm_get_parameter(int idx, uint64_t *value)
+{
+	struct xen_hvm_param xhv;
+	int r;
+
+	xhv.domid = DOMID_SELF;
+	xhv.index = idx;
+	r = HYPERVISOR_hvm_op(HVMOP_get_param, &xhv);
+	if (r < 0) {
+		printk(KERN_ERR "Cannot get hvm parameter %d: %d!\n",
+			idx, r);
+		return r;
+	}
+	*value = xhv.value;
+	return r;
+}
+
+#define HVM_CALLBACK_VIA_TYPE_VECTOR 0x2
+#define HVM_CALLBACK_VIA_TYPE_SHIFT 56
+#define HVM_CALLBACK_VECTOR(x) (((uint64_t)HVM_CALLBACK_VIA_TYPE_VECTOR)<<\
+		HVM_CALLBACK_VIA_TYPE_SHIFT | (x))
+
+#endif /* XEN_HVM_H__ */
diff --git a/include/xen/interface/callback.h b/include/xen/interface/callback.h
new file mode 100644
index 00000000..2ae3cd24
--- /dev/null
+++ b/include/xen/interface/callback.h
@@ -0,0 +1,102 @@
+/******************************************************************************
+ * callback.h
+ *
+ * Register guest OS callbacks with Xen.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Copyright (c) 2006, Ian Campbell
+ */
+
+#ifndef __XEN_PUBLIC_CALLBACK_H__
+#define __XEN_PUBLIC_CALLBACK_H__
+
+#include "xen.h"
+
+/*
+ * Prototype for this hypercall is:
+ *   long callback_op(int cmd, void *extra_args)
+ * @cmd        == CALLBACKOP_??? (callback operation).
+ * @extra_args == Operation-specific extra arguments (NULL if none).
+ */
+
+/* ia64, x86: Callback for event delivery. */
+#define CALLBACKTYPE_event                 0
+
+/* x86: Failsafe callback when guest state cannot be restored by Xen. */
+#define CALLBACKTYPE_failsafe              1
+
+/* x86/64 hypervisor: Syscall by 64-bit guest app ('64-on-64-on-64'). */
+#define CALLBACKTYPE_syscall               2
+
+/*
+ * x86/32 hypervisor: Only available on x86/32 when supervisor_mode_kernel
+ *     feature is enabled. Do not use this callback type in new code.
+ */
+#define CALLBACKTYPE_sysenter_deprecated   3
+
+/* x86: Callback for NMI delivery. */
+#define CALLBACKTYPE_nmi                   4
+
+/*
+ * x86: sysenter is only available as follows:
+ * - 32-bit hypervisor: with the supervisor_mode_kernel feature enabled
+ * - 64-bit hypervisor: 32-bit guest applications on Intel CPUs
+ *                      ('32-on-32-on-64', '32-on-64-on-64')
+ *                      [nb. also 64-bit guest applications on Intel CPUs
+ *                           ('64-on-64-on-64'), but syscall is preferred]
+ */
+#define CALLBACKTYPE_sysenter              5
+
+/*
+ * x86/64 hypervisor: Syscall by 32-bit guest app on AMD CPUs
+ *                    ('32-on-32-on-64', '32-on-64-on-64')
+ */
+#define CALLBACKTYPE_syscall32             7
+
+/*
+ * Disable event deliver during callback? This flag is ignored for event and
+ * NMI callbacks: event delivery is unconditionally disabled.
+ */
+#define _CALLBACKF_mask_events             0
+#define CALLBACKF_mask_events              (1U << _CALLBACKF_mask_events)
+
+/*
+ * Register a callback.
+ */
+#define CALLBACKOP_register                0
+struct callback_register {
+	uint16_t type;
+	uint16_t flags;
+	xen_callback_t address;
+};
+
+/*
+ * Unregister a callback.
+ *
+ * Not all callbacks can be unregistered. -EINVAL will be returned if
+ * you attempt to unregister such a callback.
+ */
+#define CALLBACKOP_unregister              1
+struct callback_unregister {
+    uint16_t type;
+    uint16_t _unused;
+};
+
+#endif /* __XEN_PUBLIC_CALLBACK_H__ */
diff --git a/include/xen/interface/elfnote.h b/include/xen/interface/elfnote.h
new file mode 100644
index 00000000..0360b15f
--- /dev/null
+++ b/include/xen/interface/elfnote.h
@@ -0,0 +1,153 @@
+/******************************************************************************
+ * elfnote.h
+ *
+ * Definitions used for the Xen ELF notes.
+ *
+ * Copyright (c) 2006, Ian Campbell, XenSource Ltd.
+ */
+
+#ifndef __XEN_PUBLIC_ELFNOTE_H__
+#define __XEN_PUBLIC_ELFNOTE_H__
+
+/*
+ * The notes should live in a SHT_NOTE segment and have "Xen" in the
+ * name field.
+ *
+ * Numeric types are either 4 or 8 bytes depending on the content of
+ * the desc field.
+ *
+ * LEGACY indicated the fields in the legacy __xen_guest string which
+ * this a note type replaces.
+ */
+
+/*
+ * NAME=VALUE pair (string).
+ *
+ * LEGACY: FEATURES and PAE
+ */
+#define XEN_ELFNOTE_INFO           0
+
+/*
+ * The virtual address of the entry point (numeric).
+ *
+ * LEGACY: VIRT_ENTRY
+ */
+#define XEN_ELFNOTE_ENTRY          1
+
+/* The virtual address of the hypercall transfer page (numeric).
+ *
+ * LEGACY: HYPERCALL_PAGE. (n.b. legacy value is a physical page
+ * number not a virtual address)
+ */
+#define XEN_ELFNOTE_HYPERCALL_PAGE 2
+
+/* The virtual address where the kernel image should be mapped (numeric).
+ *
+ * Defaults to 0.
+ *
+ * LEGACY: VIRT_BASE
+ */
+#define XEN_ELFNOTE_VIRT_BASE      3
+
+/*
+ * The offset of the ELF paddr field from the acutal required
+ * pseudo-physical address (numeric).
+ *
+ * This is used to maintain backwards compatibility with older kernels
+ * which wrote __PAGE_OFFSET into that field. This field defaults to 0
+ * if not present.
+ *
+ * LEGACY: ELF_PADDR_OFFSET. (n.b. legacy default is VIRT_BASE)
+ */
+#define XEN_ELFNOTE_PADDR_OFFSET   4
+
+/*
+ * The version of Xen that we work with (string).
+ *
+ * LEGACY: XEN_VER
+ */
+#define XEN_ELFNOTE_XEN_VERSION    5
+
+/*
+ * The name of the guest operating system (string).
+ *
+ * LEGACY: GUEST_OS
+ */
+#define XEN_ELFNOTE_GUEST_OS       6
+
+/*
+ * The version of the guest operating system (string).
+ *
+ * LEGACY: GUEST_VER
+ */
+#define XEN_ELFNOTE_GUEST_VERSION  7
+
+/*
+ * The loader type (string).
+ *
+ * LEGACY: LOADER
+ */
+#define XEN_ELFNOTE_LOADER         8
+
+/*
+ * The kernel supports PAE (x86/32 only, string = "yes" or "no").
+ *
+ * LEGACY: PAE (n.b. The legacy interface included a provision to
+ * indicate 'extended-cr3' support allowing L3 page tables to be
+ * placed above 4G. It is assumed that any kernel new enough to use
+ * these ELF notes will include this and therefore "yes" here is
+ * equivalent to "yes[entended-cr3]" in the __xen_guest interface.
+ */
+#define XEN_ELFNOTE_PAE_MODE       9
+
+/*
+ * The features supported/required by this kernel (string).
+ *
+ * The string must consist of a list of feature names (as given in
+ * features.h, without the "XENFEAT_" prefix) separated by '|'
+ * characters. If a feature is required for the kernel to function
+ * then the feature name must be preceded by a '!' character.
+ *
+ * LEGACY: FEATURES
+ */
+#define XEN_ELFNOTE_FEATURES      10
+
+/*
+ * The kernel requires the symbol table to be loaded (string = "yes" or "no")
+ * LEGACY: BSD_SYMTAB (n.b. The legacy treated the presence or absence
+ * of this string as a boolean flag rather than requiring "yes" or
+ * "no".
+ */
+#define XEN_ELFNOTE_BSD_SYMTAB    11
+
+/*
+ * The lowest address the hypervisor hole can begin at (numeric).
+ *
+ * This must not be set higher than HYPERVISOR_VIRT_START. Its presence
+ * also indicates to the hypervisor that the kernel can deal with the
+ * hole starting at a higher address.
+ */
+#define XEN_ELFNOTE_HV_START_LOW  12
+
+/*
+ * List of maddr_t-sized mask/value pairs describing how to recognize
+ * (non-present) L1 page table entries carrying valid MFNs (numeric).
+ */
+#define XEN_ELFNOTE_L1_MFN_VALID  13
+
+/*
+ * Whether or not the guest supports cooperative suspend cancellation.
+ */
+#define XEN_ELFNOTE_SUSPEND_CANCEL 14
+
+#endif /* __XEN_PUBLIC_ELFNOTE_H__ */
+
+/*
+ * Local variables:
+ * mode: C
+ * c-set-style: "BSD"
+ * c-basic-offset: 4
+ * tab-width: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
diff --git a/include/xen/interface/event_channel.h b/include/xen/interface/event_channel.h
new file mode 100644
index 00000000..2090881c
--- /dev/null
+++ b/include/xen/interface/event_channel.h
@@ -0,0 +1,197 @@
+/******************************************************************************
+ * event_channel.h
+ *
+ * Event channels between domains.
+ *
+ * Copyright (c) 2003-2004, K A Fraser.
+ */
+
+#ifndef __XEN_PUBLIC_EVENT_CHANNEL_H__
+#define __XEN_PUBLIC_EVENT_CHANNEL_H__
+
+#include <xen/interface/xen.h>
+
+typedef uint32_t evtchn_port_t;
+DEFINE_GUEST_HANDLE(evtchn_port_t);
+
+/*
+ * EVTCHNOP_alloc_unbound: Allocate a port in domain <dom> and mark as
+ * accepting interdomain bindings from domain <remote_dom>. A fresh port
+ * is allocated in <dom> and returned as <port>.
+ * NOTES:
+ *  1. If the caller is unprivileged then <dom> must be DOMID_SELF.
+ *  2. <rdom> may be DOMID_SELF, allowing loopback connections.
+ */
+#define EVTCHNOP_alloc_unbound	  6
+struct evtchn_alloc_unbound {
+	/* IN parameters */
+	domid_t dom, remote_dom;
+	/* OUT parameters */
+	evtchn_port_t port;
+};
+
+/*
+ * EVTCHNOP_bind_interdomain: Construct an interdomain event channel between
+ * the calling domain and <remote_dom>. <remote_dom,remote_port> must identify
+ * a port that is unbound and marked as accepting bindings from the calling
+ * domain. A fresh port is allocated in the calling domain and returned as
+ * <local_port>.
+ * NOTES:
+ *  2. <remote_dom> may be DOMID_SELF, allowing loopback connections.
+ */
+#define EVTCHNOP_bind_interdomain 0
+struct evtchn_bind_interdomain {
+	/* IN parameters. */
+	domid_t remote_dom;
+	evtchn_port_t remote_port;
+	/* OUT parameters. */
+	evtchn_port_t local_port;
+};
+
+/*
+ * EVTCHNOP_bind_virq: Bind a local event channel to VIRQ <irq> on specified
+ * vcpu.
+ * NOTES:
+ *  1. A virtual IRQ may be bound to at most one event channel per vcpu.
+ *  2. The allocated event channel is bound to the specified vcpu. The binding
+ *     may not be changed.
+ */
+#define EVTCHNOP_bind_virq	  1
+struct evtchn_bind_virq {
+	/* IN parameters. */
+	uint32_t virq;
+	uint32_t vcpu;
+	/* OUT parameters. */
+	evtchn_port_t port;
+};
+
+/*
+ * EVTCHNOP_bind_pirq: Bind a local event channel to PIRQ <irq>.
+ * NOTES:
+ *  1. A physical IRQ may be bound to at most one event channel per domain.
+ *  2. Only a sufficiently-privileged domain may bind to a physical IRQ.
+ */
+#define EVTCHNOP_bind_pirq	  2
+struct evtchn_bind_pirq {
+	/* IN parameters. */
+	uint32_t pirq;
+#define BIND_PIRQ__WILL_SHARE 1
+	uint32_t flags; /* BIND_PIRQ__* */
+	/* OUT parameters. */
+	evtchn_port_t port;
+};
+
+/*
+ * EVTCHNOP_bind_ipi: Bind a local event channel to receive events.
+ * NOTES:
+ *  1. The allocated event channel is bound to the specified vcpu. The binding
+ *     may not be changed.
+ */
+#define EVTCHNOP_bind_ipi	  7
+struct evtchn_bind_ipi {
+	uint32_t vcpu;
+	/* OUT parameters. */
+	evtchn_port_t port;
+};
+
+/*
+ * EVTCHNOP_close: Close a local event channel <port>. If the channel is
+ * interdomain then the remote end is placed in the unbound state
+ * (EVTCHNSTAT_unbound), awaiting a new connection.
+ */
+#define EVTCHNOP_close		  3
+struct evtchn_close {
+	/* IN parameters. */
+	evtchn_port_t port;
+};
+
+/*
+ * EVTCHNOP_send: Send an event to the remote end of the channel whose local
+ * endpoint is <port>.
+ */
+#define EVTCHNOP_send		  4
+struct evtchn_send {
+	/* IN parameters. */
+	evtchn_port_t port;
+};
+
+/*
+ * EVTCHNOP_status: Get the current status of the communication channel which
+ * has an endpoint at <dom, port>.
+ * NOTES:
+ *  1. <dom> may be specified as DOMID_SELF.
+ *  2. Only a sufficiently-privileged domain may obtain the status of an event
+ *     channel for which <dom> is not DOMID_SELF.
+ */
+#define EVTCHNOP_status		  5
+struct evtchn_status {
+	/* IN parameters */
+	domid_t  dom;
+	evtchn_port_t port;
+	/* OUT parameters */
+#define EVTCHNSTAT_closed	0  /* Channel is not in use.		     */
+#define EVTCHNSTAT_unbound	1  /* Channel is waiting interdom connection.*/
+#define EVTCHNSTAT_interdomain	2  /* Channel is connected to remote domain. */
+#define EVTCHNSTAT_pirq		3  /* Channel is bound to a phys IRQ line.   */
+#define EVTCHNSTAT_virq		4  /* Channel is bound to a virtual IRQ line */
+#define EVTCHNSTAT_ipi		5  /* Channel is bound to a virtual IPI line */
+	uint32_t status;
+	uint32_t vcpu;		   /* VCPU to which this channel is bound.   */
+	union {
+		struct {
+			domid_t dom;
+		} unbound; /* EVTCHNSTAT_unbound */
+		struct {
+			domid_t dom;
+			evtchn_port_t port;
+		} interdomain; /* EVTCHNSTAT_interdomain */
+		uint32_t pirq;	    /* EVTCHNSTAT_pirq	      */
+		uint32_t virq;	    /* EVTCHNSTAT_virq	      */
+	} u;
+};
+
+/*
+ * EVTCHNOP_bind_vcpu: Specify which vcpu a channel should notify when an
+ * event is pending.
+ * NOTES:
+ *  1. IPI- and VIRQ-bound channels always notify the vcpu that initialised
+ *     the binding. This binding cannot be changed.
+ *  2. All other channels notify vcpu0 by default. This default is set when
+ *     the channel is allocated (a port that is freed and subsequently reused
+ *     has its binding reset to vcpu0).
+ */
+#define EVTCHNOP_bind_vcpu	  8
+struct evtchn_bind_vcpu {
+	/* IN parameters. */
+	evtchn_port_t port;
+	uint32_t vcpu;
+};
+
+/*
+ * EVTCHNOP_unmask: Unmask the specified local event-channel port and deliver
+ * a notification to the appropriate VCPU if an event is pending.
+ */
+#define EVTCHNOP_unmask		  9
+struct evtchn_unmask {
+	/* IN parameters. */
+	evtchn_port_t port;
+};
+
+struct evtchn_op {
+	uint32_t cmd; /* EVTCHNOP_* */
+	union {
+		struct evtchn_alloc_unbound    alloc_unbound;
+		struct evtchn_bind_interdomain bind_interdomain;
+		struct evtchn_bind_virq	       bind_virq;
+		struct evtchn_bind_pirq	       bind_pirq;
+		struct evtchn_bind_ipi	       bind_ipi;
+		struct evtchn_close	       close;
+		struct evtchn_send	       send;
+		struct evtchn_status	       status;
+		struct evtchn_bind_vcpu	       bind_vcpu;
+		struct evtchn_unmask	       unmask;
+	} u;
+};
+DEFINE_GUEST_HANDLE_STRUCT(evtchn_op);
+
+#endif /* __XEN_PUBLIC_EVENT_CHANNEL_H__ */
diff --git a/include/xen/interface/features.h b/include/xen/interface/features.h
new file mode 100644
index 00000000..b6ca39a0
--- /dev/null
+++ b/include/xen/interface/features.h
@@ -0,0 +1,55 @@
+/******************************************************************************
+ * features.h
+ *
+ * Feature flags, reported by XENVER_get_features.
+ *
+ * Copyright (c) 2006, Keir Fraser <keir@xensource.com>
+ */
+
+#ifndef __XEN_PUBLIC_FEATURES_H__
+#define __XEN_PUBLIC_FEATURES_H__
+
+/*
+ * If set, the guest does not need to write-protect its pagetables, and can
+ * update them via direct writes.
+ */
+#define XENFEAT_writable_page_tables       0
+
+/*
+ * If set, the guest does not need to write-protect its segment descriptor
+ * tables, and can update them via direct writes.
+ */
+#define XENFEAT_writable_descriptor_tables 1
+
+/*
+ * If set, translation between the guest's 'pseudo-physical' address space
+ * and the host's machine address space are handled by the hypervisor. In this
+ * mode the guest does not need to perform phys-to/from-machine translations
+ * when performing page table operations.
+ */
+#define XENFEAT_auto_translated_physmap    2
+
+/* If set, the guest is running in supervisor mode (e.g., x86 ring 0). */
+#define XENFEAT_supervisor_mode_kernel     3
+
+/*
+ * If set, the guest does not need to allocate x86 PAE page directories
+ * below 4GB. This flag is usually implied by auto_translated_physmap.
+ */
+#define XENFEAT_pae_pgdir_above_4gb        4
+
+/* x86: Does this Xen host support the MMU_PT_UPDATE_PRESERVE_AD hypercall? */
+#define XENFEAT_mmu_pt_update_preserve_ad  5
+
+/* x86: Does this Xen host support the HVM callback vector type? */
+#define XENFEAT_hvm_callback_vector        8
+
+/* x86: pvclock algorithm is safe to use on HVM */
+#define XENFEAT_hvm_safe_pvclock           9
+
+/* x86: pirq can be used by HVM guests */
+#define XENFEAT_hvm_pirqs           10
+
+#define XENFEAT_NR_SUBMAPS 1
+
+#endif /* __XEN_PUBLIC_FEATURES_H__ */
diff --git a/include/xen/interface/grant_table.h b/include/xen/interface/grant_table.h
new file mode 100644
index 00000000..a17d8443
--- /dev/null
+++ b/include/xen/interface/grant_table.h
@@ -0,0 +1,538 @@
+/******************************************************************************
+ * grant_table.h
+ *
+ * Interface for granting foreign access to page frames, and receiving
+ * page-ownership transfers.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Copyright (c) 2004, K A Fraser
+ */
+
+#ifndef __XEN_PUBLIC_GRANT_TABLE_H__
+#define __XEN_PUBLIC_GRANT_TABLE_H__
+
+#include <xen/interface/xen.h>
+
+/***********************************
+ * GRANT TABLE REPRESENTATION
+ */
+
+/* Some rough guidelines on accessing and updating grant-table entries
+ * in a concurrency-safe manner. For more information, Linux contains a
+ * reference implementation for guest OSes (arch/xen/kernel/grant_table.c).
+ *
+ * NB. WMB is a no-op on current-generation x86 processors. However, a
+ *     compiler barrier will still be required.
+ *
+ * Introducing a valid entry into the grant table:
+ *  1. Write ent->domid.
+ *  2. Write ent->frame:
+ *      GTF_permit_access:   Frame to which access is permitted.
+ *      GTF_accept_transfer: Pseudo-phys frame slot being filled by new
+ *                           frame, or zero if none.
+ *  3. Write memory barrier (WMB).
+ *  4. Write ent->flags, inc. valid type.
+ *
+ * Invalidating an unused GTF_permit_access entry:
+ *  1. flags = ent->flags.
+ *  2. Observe that !(flags & (GTF_reading|GTF_writing)).
+ *  3. Check result of SMP-safe CMPXCHG(&ent->flags, flags, 0).
+ *  NB. No need for WMB as reuse of entry is control-dependent on success of
+ *      step 3, and all architectures guarantee ordering of ctrl-dep writes.
+ *
+ * Invalidating an in-use GTF_permit_access entry:
+ *  This cannot be done directly. Request assistance from the domain controller
+ *  which can set a timeout on the use of a grant entry and take necessary
+ *  action. (NB. This is not yet implemented!).
+ *
+ * Invalidating an unused GTF_accept_transfer entry:
+ *  1. flags = ent->flags.
+ *  2. Observe that !(flags & GTF_transfer_committed). [*]
+ *  3. Check result of SMP-safe CMPXCHG(&ent->flags, flags, 0).
+ *  NB. No need for WMB as reuse of entry is control-dependent on success of
+ *      step 3, and all architectures guarantee ordering of ctrl-dep writes.
+ *  [*] If GTF_transfer_committed is set then the grant entry is 'committed'.
+ *      The guest must /not/ modify the grant entry until the address of the
+ *      transferred frame is written. It is safe for the guest to spin waiting
+ *      for this to occur (detect by observing GTF_transfer_completed in
+ *      ent->flags).
+ *
+ * Invalidating a committed GTF_accept_transfer entry:
+ *  1. Wait for (ent->flags & GTF_transfer_completed).
+ *
+ * Changing a GTF_permit_access from writable to read-only:
+ *  Use SMP-safe CMPXCHG to set GTF_readonly, while checking !GTF_writing.
+ *
+ * Changing a GTF_permit_access from read-only to writable:
+ *  Use SMP-safe bit-setting instruction.
+ */
+
+/*
+ * Reference to a grant entry in a specified domain's grant table.
+ */
+typedef uint32_t grant_ref_t;
+
+/*
+ * A grant table comprises a packed array of grant entries in one or more
+ * page frames shared between Xen and a guest.
+ * [XEN]: This field is written by Xen and read by the sharing guest.
+ * [GST]: This field is written by the guest and read by Xen.
+ */
+
+/*
+ * Version 1 of the grant table entry structure is maintained purely
+ * for backwards compatibility.  New guests should use version 2.
+ */
+struct grant_entry_v1 {
+    /* GTF_xxx: various type and flag information.  [XEN,GST] */
+    uint16_t flags;
+    /* The domain being granted foreign privileges. [GST] */
+    domid_t  domid;
+    /*
+     * GTF_permit_access: Frame that @domid is allowed to map and access. [GST]
+     * GTF_accept_transfer: Frame whose ownership transferred by @domid. [XEN]
+     */
+    uint32_t frame;
+};
+
+/*
+ * Type of grant entry.
+ *  GTF_invalid: This grant entry grants no privileges.
+ *  GTF_permit_access: Allow @domid to map/access @frame.
+ *  GTF_accept_transfer: Allow @domid to transfer ownership of one page frame
+ *                       to this guest. Xen writes the page number to @frame.
+ *  GTF_transitive: Allow @domid to transitively access a subrange of
+ *                  @trans_grant in @trans_domid.  No mappings are allowed.
+ */
+#define GTF_invalid         (0U<<0)
+#define GTF_permit_access   (1U<<0)
+#define GTF_accept_transfer (2U<<0)
+#define GTF_transitive      (3U<<0)
+#define GTF_type_mask       (3U<<0)
+
+/*
+ * Subflags for GTF_permit_access.
+ *  GTF_readonly: Restrict @domid to read-only mappings and accesses. [GST]
+ *  GTF_reading: Grant entry is currently mapped for reading by @domid. [XEN]
+ *  GTF_writing: Grant entry is currently mapped for writing by @domid. [XEN]
+ *  GTF_sub_page: Grant access to only a subrange of the page.  @domid
+ *                will only be allowed to copy from the grant, and not
+ *                map it. [GST]
+ */
+#define _GTF_readonly       (2)
+#define GTF_readonly        (1U<<_GTF_readonly)
+#define _GTF_reading        (3)
+#define GTF_reading         (1U<<_GTF_reading)
+#define _GTF_writing        (4)
+#define GTF_writing         (1U<<_GTF_writing)
+#define _GTF_sub_page       (8)
+#define GTF_sub_page        (1U<<_GTF_sub_page)
+
+/*
+ * Subflags for GTF_accept_transfer:
+ *  GTF_transfer_committed: Xen sets this flag to indicate that it is committed
+ *      to transferring ownership of a page frame. When a guest sees this flag
+ *      it must /not/ modify the grant entry until GTF_transfer_completed is
+ *      set by Xen.
+ *  GTF_transfer_completed: It is safe for the guest to spin-wait on this flag
+ *      after reading GTF_transfer_committed. Xen will always write the frame
+ *      address, followed by ORing this flag, in a timely manner.
+ */
+#define _GTF_transfer_committed (2)
+#define GTF_transfer_committed  (1U<<_GTF_transfer_committed)
+#define _GTF_transfer_completed (3)
+#define GTF_transfer_completed  (1U<<_GTF_transfer_completed)
+
+/*
+ * Version 2 grant table entries.  These fulfil the same role as
+ * version 1 entries, but can represent more complicated operations.
+ * Any given domain will have either a version 1 or a version 2 table,
+ * and every entry in the table will be the same version.
+ *
+ * The interface by which domains use grant references does not depend
+ * on the grant table version in use by the other domain.
+ */
+
+/*
+ * Version 1 and version 2 grant entries share a common prefix.  The
+ * fields of the prefix are documented as part of struct
+ * grant_entry_v1.
+ */
+struct grant_entry_header {
+    uint16_t flags;
+    domid_t  domid;
+};
+
+/*
+ * Version 2 of the grant entry structure, here is an union because three
+ * different types are suppotted: full_page, sub_page and transitive.
+ */
+union grant_entry_v2 {
+    struct grant_entry_header hdr;
+
+    /*
+     * This member is used for V1-style full page grants, where either:
+     *
+     * -- hdr.type is GTF_accept_transfer, or
+     * -- hdr.type is GTF_permit_access and GTF_sub_page is not set.
+     *
+     * In that case, the frame field has the same semantics as the
+     * field of the same name in the V1 entry structure.
+     */
+    struct {
+	struct grant_entry_header hdr;
+	uint32_t pad0;
+	uint64_t frame;
+    } full_page;
+
+    /*
+     * If the grant type is GTF_grant_access and GTF_sub_page is set,
+     * @domid is allowed to access bytes [@page_off,@page_off+@length)
+     * in frame @frame.
+     */
+    struct {
+	struct grant_entry_header hdr;
+	uint16_t page_off;
+	uint16_t length;
+	uint64_t frame;
+    } sub_page;
+
+    /*
+     * If the grant is GTF_transitive, @domid is allowed to use the
+     * grant @gref in domain @trans_domid, as if it was the local
+     * domain.  Obviously, the transitive access must be compatible
+     * with the original grant.
+     */
+    struct {
+	struct grant_entry_header hdr;
+	domid_t trans_domid;
+	uint16_t pad0;
+	grant_ref_t gref;
+    } transitive;
+
+    uint32_t __spacer[4]; /* Pad to a power of two */
+};
+
+typedef uint16_t grant_status_t;
+
+/***********************************
+ * GRANT TABLE QUERIES AND USES
+ */
+
+/*
+ * Handle to track a mapping created via a grant reference.
+ */
+typedef uint32_t grant_handle_t;
+
+/*
+ * GNTTABOP_map_grant_ref: Map the grant entry (<dom>,<ref>) for access
+ * by devices and/or host CPUs. If successful, <handle> is a tracking number
+ * that must be presented later to destroy the mapping(s). On error, <handle>
+ * is a negative status code.
+ * NOTES:
+ *  1. If GNTMAP_device_map is specified then <dev_bus_addr> is the address
+ *     via which I/O devices may access the granted frame.
+ *  2. If GNTMAP_host_map is specified then a mapping will be added at
+ *     either a host virtual address in the current address space, or at
+ *     a PTE at the specified machine address.  The type of mapping to
+ *     perform is selected through the GNTMAP_contains_pte flag, and the
+ *     address is specified in <host_addr>.
+ *  3. Mappings should only be destroyed via GNTTABOP_unmap_grant_ref. If a
+ *     host mapping is destroyed by other means then it is *NOT* guaranteed
+ *     to be accounted to the correct grant reference!
+ */
+#define GNTTABOP_map_grant_ref        0
+struct gnttab_map_grant_ref {
+    /* IN parameters. */
+    uint64_t host_addr;
+    uint32_t flags;               /* GNTMAP_* */
+    grant_ref_t ref;
+    domid_t  dom;
+    /* OUT parameters. */
+    int16_t  status;              /* GNTST_* */
+    grant_handle_t handle;
+    uint64_t dev_bus_addr;
+};
+DEFINE_GUEST_HANDLE_STRUCT(gnttab_map_grant_ref);
+
+/*
+ * GNTTABOP_unmap_grant_ref: Destroy one or more grant-reference mappings
+ * tracked by <handle>. If <host_addr> or <dev_bus_addr> is zero, that
+ * field is ignored. If non-zero, they must refer to a device/host mapping
+ * that is tracked by <handle>
+ * NOTES:
+ *  1. The call may fail in an undefined manner if either mapping is not
+ *     tracked by <handle>.
+ *  3. After executing a batch of unmaps, it is guaranteed that no stale
+ *     mappings will remain in the device or host TLBs.
+ */
+#define GNTTABOP_unmap_grant_ref      1
+struct gnttab_unmap_grant_ref {
+    /* IN parameters. */
+    uint64_t host_addr;
+    uint64_t dev_bus_addr;
+    grant_handle_t handle;
+    /* OUT parameters. */
+    int16_t  status;              /* GNTST_* */
+};
+DEFINE_GUEST_HANDLE_STRUCT(gnttab_unmap_grant_ref);
+
+/*
+ * GNTTABOP_setup_table: Set up a grant table for <dom> comprising at least
+ * <nr_frames> pages. The frame addresses are written to the <frame_list>.
+ * Only <nr_frames> addresses are written, even if the table is larger.
+ * NOTES:
+ *  1. <dom> may be specified as DOMID_SELF.
+ *  2. Only a sufficiently-privileged domain may specify <dom> != DOMID_SELF.
+ *  3. Xen may not support more than a single grant-table page per domain.
+ */
+#define GNTTABOP_setup_table          2
+struct gnttab_setup_table {
+    /* IN parameters. */
+    domid_t  dom;
+    uint32_t nr_frames;
+    /* OUT parameters. */
+    int16_t  status;              /* GNTST_* */
+    GUEST_HANDLE(ulong) frame_list;
+};
+DEFINE_GUEST_HANDLE_STRUCT(gnttab_setup_table);
+
+/*
+ * GNTTABOP_dump_table: Dump the contents of the grant table to the
+ * xen console. Debugging use only.
+ */
+#define GNTTABOP_dump_table           3
+struct gnttab_dump_table {
+    /* IN parameters. */
+    domid_t dom;
+    /* OUT parameters. */
+    int16_t status;               /* GNTST_* */
+};
+DEFINE_GUEST_HANDLE_STRUCT(gnttab_dump_table);
+
+/*
+ * GNTTABOP_transfer_grant_ref: Transfer <frame> to a foreign domain. The
+ * foreign domain has previously registered its interest in the transfer via
+ * <domid, ref>.
+ *
+ * Note that, even if the transfer fails, the specified page no longer belongs
+ * to the calling domain *unless* the error is GNTST_bad_page.
+ */
+#define GNTTABOP_transfer                4
+struct gnttab_transfer {
+    /* IN parameters. */
+    unsigned long mfn;
+    domid_t       domid;
+    grant_ref_t   ref;
+    /* OUT parameters. */
+    int16_t       status;
+};
+DEFINE_GUEST_HANDLE_STRUCT(gnttab_transfer);
+
+/*
+ * GNTTABOP_copy: Hypervisor based copy
+ * source and destinations can be eithers MFNs or, for foreign domains,
+ * grant references. the foreign domain has to grant read/write access
+ * in its grant table.
+ *
+ * The flags specify what type source and destinations are (either MFN
+ * or grant reference).
+ *
+ * Note that this can also be used to copy data between two domains
+ * via a third party if the source and destination domains had previously
+ * grant appropriate access to their pages to the third party.
+ *
+ * source_offset specifies an offset in the source frame, dest_offset
+ * the offset in the target frame and  len specifies the number of
+ * bytes to be copied.
+ */
+
+#define _GNTCOPY_source_gref      (0)
+#define GNTCOPY_source_gref       (1<<_GNTCOPY_source_gref)
+#define _GNTCOPY_dest_gref        (1)
+#define GNTCOPY_dest_gref         (1<<_GNTCOPY_dest_gref)
+
+#define GNTTABOP_copy                 5
+struct gnttab_copy {
+	/* IN parameters. */
+	struct {
+		union {
+			grant_ref_t ref;
+			unsigned long   gmfn;
+		} u;
+		domid_t  domid;
+		uint16_t offset;
+	} source, dest;
+	uint16_t      len;
+	uint16_t      flags;          /* GNTCOPY_* */
+	/* OUT parameters. */
+	int16_t       status;
+};
+DEFINE_GUEST_HANDLE_STRUCT(gnttab_copy);
+
+/*
+ * GNTTABOP_query_size: Query the current and maximum sizes of the shared
+ * grant table.
+ * NOTES:
+ *  1. <dom> may be specified as DOMID_SELF.
+ *  2. Only a sufficiently-privileged domain may specify <dom> != DOMID_SELF.
+ */
+#define GNTTABOP_query_size           6
+struct gnttab_query_size {
+    /* IN parameters. */
+    domid_t  dom;
+    /* OUT parameters. */
+    uint32_t nr_frames;
+    uint32_t max_nr_frames;
+    int16_t  status;              /* GNTST_* */
+};
+DEFINE_GUEST_HANDLE_STRUCT(gnttab_query_size);
+
+/*
+ * GNTTABOP_unmap_and_replace: Destroy one or more grant-reference mappings
+ * tracked by <handle> but atomically replace the page table entry with one
+ * pointing to the machine address under <new_addr>.  <new_addr> will be
+ * redirected to the null entry.
+ * NOTES:
+ *  1. The call may fail in an undefined manner if either mapping is not
+ *     tracked by <handle>.
+ *  2. After executing a batch of unmaps, it is guaranteed that no stale
+ *     mappings will remain in the device or host TLBs.
+ */
+#define GNTTABOP_unmap_and_replace    7
+struct gnttab_unmap_and_replace {
+    /* IN parameters. */
+    uint64_t host_addr;
+    uint64_t new_addr;
+    grant_handle_t handle;
+    /* OUT parameters. */
+    int16_t  status;              /* GNTST_* */
+};
+DEFINE_GUEST_HANDLE_STRUCT(gnttab_unmap_and_replace);
+
+/*
+ * GNTTABOP_set_version: Request a particular version of the grant
+ * table shared table structure.  This operation can only be performed
+ * once in any given domain.  It must be performed before any grants
+ * are activated; otherwise, the domain will be stuck with version 1.
+ * The only defined versions are 1 and 2.
+ */
+#define GNTTABOP_set_version          8
+struct gnttab_set_version {
+    /* IN parameters */
+    uint32_t version;
+};
+DEFINE_GUEST_HANDLE_STRUCT(gnttab_set_version);
+
+/*
+ * GNTTABOP_get_status_frames: Get the list of frames used to store grant
+ * status for <dom>. In grant format version 2, the status is separated
+ * from the other shared grant fields to allow more efficient synchronization
+ * using barriers instead of atomic cmpexch operations.
+ * <nr_frames> specify the size of vector <frame_list>.
+ * The frame addresses are returned in the <frame_list>.
+ * Only <nr_frames> addresses are returned, even if the table is larger.
+ * NOTES:
+ *  1. <dom> may be specified as DOMID_SELF.
+ *  2. Only a sufficiently-privileged domain may specify <dom> != DOMID_SELF.
+ */
+#define GNTTABOP_get_status_frames     9
+struct gnttab_get_status_frames {
+    /* IN parameters. */
+    uint32_t nr_frames;
+    domid_t  dom;
+    /* OUT parameters. */
+    int16_t  status;              /* GNTST_* */
+    GUEST_HANDLE(uint64_t) frame_list;
+};
+DEFINE_GUEST_HANDLE_STRUCT(gnttab_get_status_frames);
+
+/*
+ * GNTTABOP_get_version: Get the grant table version which is in
+ * effect for domain <dom>.
+ */
+#define GNTTABOP_get_version          10
+struct gnttab_get_version {
+    /* IN parameters */
+    domid_t dom;
+    uint16_t pad;
+    /* OUT parameters */
+    uint32_t version;
+};
+DEFINE_GUEST_HANDLE_STRUCT(gnttab_get_version);
+
+/*
+ * Bitfield values for update_pin_status.flags.
+ */
+ /* Map the grant entry for access by I/O devices. */
+#define _GNTMAP_device_map      (0)
+#define GNTMAP_device_map       (1<<_GNTMAP_device_map)
+ /* Map the grant entry for access by host CPUs. */
+#define _GNTMAP_host_map        (1)
+#define GNTMAP_host_map         (1<<_GNTMAP_host_map)
+ /* Accesses to the granted frame will be restricted to read-only access. */
+#define _GNTMAP_readonly        (2)
+#define GNTMAP_readonly         (1<<_GNTMAP_readonly)
+ /*
+  * GNTMAP_host_map subflag:
+  *  0 => The host mapping is usable only by the guest OS.
+  *  1 => The host mapping is usable by guest OS + current application.
+  */
+#define _GNTMAP_application_map (3)
+#define GNTMAP_application_map  (1<<_GNTMAP_application_map)
+
+ /*
+  * GNTMAP_contains_pte subflag:
+  *  0 => This map request contains a host virtual address.
+  *  1 => This map request contains the machine addess of the PTE to update.
+  */
+#define _GNTMAP_contains_pte    (4)
+#define GNTMAP_contains_pte     (1<<_GNTMAP_contains_pte)
+
+/*
+ * Values for error status returns. All errors are -ve.
+ */
+#define GNTST_okay             (0)  /* Normal return.                        */
+#define GNTST_general_error    (-1) /* General undefined error.              */
+#define GNTST_bad_domain       (-2) /* Unrecognsed domain id.                */
+#define GNTST_bad_gntref       (-3) /* Unrecognised or inappropriate gntref. */
+#define GNTST_bad_handle       (-4) /* Unrecognised or inappropriate handle. */
+#define GNTST_bad_virt_addr    (-5) /* Inappropriate virtual address to map. */
+#define GNTST_bad_dev_addr     (-6) /* Inappropriate device address to unmap.*/
+#define GNTST_no_device_space  (-7) /* Out of space in I/O MMU.              */
+#define GNTST_permission_denied (-8) /* Not enough privilege for operation.  */
+#define GNTST_bad_page         (-9) /* Specified page was invalid for op.    */
+#define GNTST_bad_copy_arg    (-10) /* copy arguments cross page boundary */
+
+#define GNTTABOP_error_msgs {                   \
+    "okay",                                     \
+    "undefined error",                          \
+    "unrecognised domain id",                   \
+    "invalid grant reference",                  \
+    "invalid mapping handle",                   \
+    "invalid virtual address",                  \
+    "invalid device address",                   \
+    "no spare translation slot in the I/O MMU", \
+    "permission denied",                        \
+    "bad page",                                 \
+    "copy arguments cross page boundary"        \
+}
+
+#endif /* __XEN_PUBLIC_GRANT_TABLE_H__ */
diff --git a/include/xen/interface/hvm/hvm_op.h b/include/xen/interface/hvm/hvm_op.h
new file mode 100644
index 00000000..a4827f46
--- /dev/null
+++ b/include/xen/interface/hvm/hvm_op.h
@@ -0,0 +1,46 @@
+/*
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef __XEN_PUBLIC_HVM_HVM_OP_H__
+#define __XEN_PUBLIC_HVM_HVM_OP_H__
+
+/* Get/set subcommands: the second argument of the hypercall is a
+ * pointer to a xen_hvm_param struct. */
+#define HVMOP_set_param           0
+#define HVMOP_get_param           1
+struct xen_hvm_param {
+    domid_t  domid;    /* IN */
+    uint32_t index;    /* IN */
+    uint64_t value;    /* IN/OUT */
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_hvm_param);
+
+/* Hint from PV drivers for pagetable destruction. */
+#define HVMOP_pagetable_dying       9
+struct xen_hvm_pagetable_dying {
+    /* Domain with a pagetable about to be destroyed. */
+    domid_t  domid;
+    /* guest physical address of the toplevel pagetable dying */
+    aligned_u64 gpa;
+};
+typedef struct xen_hvm_pagetable_dying xen_hvm_pagetable_dying_t;
+DEFINE_GUEST_HANDLE_STRUCT(xen_hvm_pagetable_dying_t);
+ 
+#endif /* __XEN_PUBLIC_HVM_HVM_OP_H__ */
diff --git a/include/xen/interface/hvm/params.h b/include/xen/interface/hvm/params.h
new file mode 100644
index 00000000..1b4f923d
--- /dev/null
+++ b/include/xen/interface/hvm/params.h
@@ -0,0 +1,99 @@
+/*
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef __XEN_PUBLIC_HVM_PARAMS_H__
+#define __XEN_PUBLIC_HVM_PARAMS_H__
+
+#include "hvm_op.h"
+
+/*
+ * Parameter space for HVMOP_{set,get}_param.
+ */
+
+/*
+ * How should CPU0 event-channel notifications be delivered?
+ * val[63:56] == 0: val[55:0] is a delivery GSI (Global System Interrupt).
+ * val[63:56] == 1: val[55:0] is a delivery PCI INTx line, as follows:
+ *                  Domain = val[47:32], Bus  = val[31:16],
+ *                  DevFn  = val[15: 8], IntX = val[ 1: 0]
+ * val[63:56] == 2: val[7:0] is a vector number.
+ * If val == 0 then CPU0 event-channel notifications are not delivered.
+ */
+#define HVM_PARAM_CALLBACK_IRQ 0
+
+#define HVM_PARAM_STORE_PFN    1
+#define HVM_PARAM_STORE_EVTCHN 2
+
+#define HVM_PARAM_PAE_ENABLED  4
+
+#define HVM_PARAM_IOREQ_PFN    5
+
+#define HVM_PARAM_BUFIOREQ_PFN 6
+
+/*
+ * Set mode for virtual timers (currently x86 only):
+ *  delay_for_missed_ticks (default):
+ *   Do not advance a vcpu's time beyond the correct delivery time for
+ *   interrupts that have been missed due to preemption. Deliver missed
+ *   interrupts when the vcpu is rescheduled and advance the vcpu's virtual
+ *   time stepwise for each one.
+ *  no_delay_for_missed_ticks:
+ *   As above, missed interrupts are delivered, but guest time always tracks
+ *   wallclock (i.e., real) time while doing so.
+ *  no_missed_ticks_pending:
+ *   No missed interrupts are held pending. Instead, to ensure ticks are
+ *   delivered at some non-zero rate, if we detect missed ticks then the
+ *   internal tick alarm is not disabled if the VCPU is preempted during the
+ *   next tick period.
+ *  one_missed_tick_pending:
+ *   Missed interrupts are collapsed together and delivered as one 'late tick'.
+ *   Guest time always tracks wallclock (i.e., real) time.
+ */
+#define HVM_PARAM_TIMER_MODE   10
+#define HVMPTM_delay_for_missed_ticks    0
+#define HVMPTM_no_delay_for_missed_ticks 1
+#define HVMPTM_no_missed_ticks_pending   2
+#define HVMPTM_one_missed_tick_pending   3
+
+/* Boolean: Enable virtual HPET (high-precision event timer)? (x86-only) */
+#define HVM_PARAM_HPET_ENABLED 11
+
+/* Identity-map page directory used by Intel EPT when CR0.PG=0. */
+#define HVM_PARAM_IDENT_PT     12
+
+/* Device Model domain, defaults to 0. */
+#define HVM_PARAM_DM_DOMAIN    13
+
+/* ACPI S state: currently support S0 and S3 on x86. */
+#define HVM_PARAM_ACPI_S_STATE 14
+
+/* TSS used on Intel when CR0.PE=0. */
+#define HVM_PARAM_VM86_TSS     15
+
+/* Boolean: Enable aligning all periodic vpts to reduce interrupts */
+#define HVM_PARAM_VPT_ALIGN    16
+
+/* Console debug shared memory ring and event channel */
+#define HVM_PARAM_CONSOLE_PFN    17
+#define HVM_PARAM_CONSOLE_EVTCHN 18
+
+#define HVM_NR_PARAMS          19
+
+#endif /* __XEN_PUBLIC_HVM_PARAMS_H__ */
diff --git a/include/xen/interface/io/blkif.h b/include/xen/interface/io/blkif.h
new file mode 100644
index 00000000..ee338bfd
--- /dev/null
+++ b/include/xen/interface/io/blkif.h
@@ -0,0 +1,196 @@
+/******************************************************************************
+ * blkif.h
+ *
+ * Unified block-device I/O interface for Xen guest OSes.
+ *
+ * Copyright (c) 2003-2004, Keir Fraser
+ */
+
+#ifndef __XEN_PUBLIC_IO_BLKIF_H__
+#define __XEN_PUBLIC_IO_BLKIF_H__
+
+#include "ring.h"
+#include "../grant_table.h"
+
+/*
+ * Front->back notifications: When enqueuing a new request, sending a
+ * notification can be made conditional on req_event (i.e., the generic
+ * hold-off mechanism provided by the ring macros). Backends must set
+ * req_event appropriately (e.g., using RING_FINAL_CHECK_FOR_REQUESTS()).
+ *
+ * Back->front notifications: When enqueuing a new response, sending a
+ * notification can be made conditional on rsp_event (i.e., the generic
+ * hold-off mechanism provided by the ring macros). Frontends must set
+ * rsp_event appropriately (e.g., using RING_FINAL_CHECK_FOR_RESPONSES()).
+ */
+
+typedef uint16_t blkif_vdev_t;
+typedef uint64_t blkif_sector_t;
+
+/*
+ * REQUEST CODES.
+ */
+#define BLKIF_OP_READ              0
+#define BLKIF_OP_WRITE             1
+/*
+ * Recognised only if "feature-barrier" is present in backend xenbus info.
+ * The "feature_barrier" node contains a boolean indicating whether barrier
+ * requests are likely to succeed or fail. Either way, a barrier request
+ * may fail at any time with BLKIF_RSP_EOPNOTSUPP if it is unsupported by
+ * the underlying block-device hardware. The boolean simply indicates whether
+ * or not it is worthwhile for the frontend to attempt barrier requests.
+ * If a backend does not recognise BLKIF_OP_WRITE_BARRIER, it should *not*
+ * create the "feature-barrier" node!
+ */
+#define BLKIF_OP_WRITE_BARRIER     2
+
+/*
+ * Recognised if "feature-flush-cache" is present in backend xenbus
+ * info.  A flush will ask the underlying storage hardware to flush its
+ * non-volatile caches as appropriate.  The "feature-flush-cache" node
+ * contains a boolean indicating whether flush requests are likely to
+ * succeed or fail. Either way, a flush request may fail at any time
+ * with BLKIF_RSP_EOPNOTSUPP if it is unsupported by the underlying
+ * block-device hardware. The boolean simply indicates whether or not it
+ * is worthwhile for the frontend to attempt flushes.  If a backend does
+ * not recognise BLKIF_OP_WRITE_FLUSH_CACHE, it should *not* create the
+ * "feature-flush-cache" node!
+ */
+#define BLKIF_OP_FLUSH_DISKCACHE   3
+
+/*
+ * Recognised only if "feature-discard" is present in backend xenbus info.
+ * The "feature-discard" node contains a boolean indicating whether trim
+ * (ATA) or unmap (SCSI) - conviently called discard requests are likely
+ * to succeed or fail. Either way, a discard request
+ * may fail at any time with BLKIF_RSP_EOPNOTSUPP if it is unsupported by
+ * the underlying block-device hardware. The boolean simply indicates whether
+ * or not it is worthwhile for the frontend to attempt discard requests.
+ * If a backend does not recognise BLKIF_OP_DISCARD, it should *not*
+ * create the "feature-discard" node!
+ *
+ * Discard operation is a request for the underlying block device to mark
+ * extents to be erased. However, discard does not guarantee that the blocks
+ * will be erased from the device - it is just a hint to the device
+ * controller that these blocks are no longer in use. What the device
+ * controller does with that information is left to the controller.
+ * Discard operations are passed with sector_number as the
+ * sector index to begin discard operations at and nr_sectors as the number of
+ * sectors to be discarded. The specified sectors should be discarded if the
+ * underlying block device supports trim (ATA) or unmap (SCSI) operations,
+ * or a BLKIF_RSP_EOPNOTSUPP  should be returned.
+ * More information about trim/unmap operations at:
+ * http://t13.org/Documents/UploadedDocuments/docs2008/
+ *     e07154r6-Data_Set_Management_Proposal_for_ATA-ACS2.doc
+ * http://www.seagate.com/staticfiles/support/disc/manuals/
+ *     Interface%20manuals/100293068c.pdf
+ * The backend can optionally provide three extra XenBus attributes to
+ * further optimize the discard functionality:
+ * 'discard-aligment' - Devices that support discard functionality may
+ * internally allocate space in units that are bigger than the exported
+ * logical block size. The discard-alignment parameter indicates how many bytes
+ * the beginning of the partition is offset from the internal allocation unit's
+ * natural alignment.
+ * 'discard-granularity'  - Devices that support discard functionality may
+ * internally allocate space using units that are bigger than the logical block
+ * size. The discard-granularity parameter indicates the size of the internal
+ * allocation unit in bytes if reported by the device. Otherwise the
+ * discard-granularity will be set to match the device's physical block size.
+ * 'discard-secure' - All copies of the discarded sectors (potentially created
+ * by garbage collection) must also be erased.  To use this feature, the flag
+ * BLKIF_DISCARD_SECURE must be set in the blkif_request_trim.
+ */
+#define BLKIF_OP_DISCARD           5
+
+/*
+ * Maximum scatter/gather segments per request.
+ * This is carefully chosen so that sizeof(struct blkif_ring) <= PAGE_SIZE.
+ * NB. This could be 12 if the ring indexes weren't stored in the same page.
+ */
+#define BLKIF_MAX_SEGMENTS_PER_REQUEST 11
+
+struct blkif_request_rw {
+	uint8_t        nr_segments;  /* number of segments                   */
+	blkif_vdev_t   handle;       /* only for read/write requests         */
+#ifdef CONFIG_X86_64
+	uint32_t       _pad1;	     /* offsetof(blkif_request,u.rw.id) == 8 */
+#endif
+	uint64_t       id;           /* private guest value, echoed in resp  */
+	blkif_sector_t sector_number;/* start sector idx on disk (r/w only)  */
+	struct blkif_request_segment {
+		grant_ref_t gref;        /* reference to I/O buffer frame        */
+		/* @first_sect: first sector in frame to transfer (inclusive).   */
+		/* @last_sect: last sector in frame to transfer (inclusive).     */
+		uint8_t     first_sect, last_sect;
+	} seg[BLKIF_MAX_SEGMENTS_PER_REQUEST];
+} __attribute__((__packed__));
+
+struct blkif_request_discard {
+	uint8_t        flag;         /* BLKIF_DISCARD_SECURE or zero.        */
+#define BLKIF_DISCARD_SECURE (1<<0)  /* ignored if discard-secure=0          */
+	blkif_vdev_t   _pad1;        /* only for read/write requests         */
+#ifdef CONFIG_X86_64
+	uint32_t       _pad2;        /* offsetof(blkif_req..,u.discard.id)==8*/
+#endif
+	uint64_t       id;           /* private guest value, echoed in resp  */
+	blkif_sector_t sector_number;
+	uint64_t       nr_sectors;
+	uint8_t        _pad3;
+} __attribute__((__packed__));
+
+struct blkif_request {
+	uint8_t        operation;    /* BLKIF_OP_???                         */
+	union {
+		struct blkif_request_rw rw;
+		struct blkif_request_discard discard;
+	} u;
+} __attribute__((__packed__));
+
+struct blkif_response {
+	uint64_t        id;              /* copied from request */
+	uint8_t         operation;       /* copied from request */
+	int16_t         status;          /* BLKIF_RSP_???       */
+};
+
+/*
+ * STATUS RETURN CODES.
+ */
+ /* Operation not supported (only happens on barrier writes). */
+#define BLKIF_RSP_EOPNOTSUPP  -2
+ /* Operation failed for some unspecified reason (-EIO). */
+#define BLKIF_RSP_ERROR       -1
+ /* Operation completed successfully. */
+#define BLKIF_RSP_OKAY         0
+
+/*
+ * Generate blkif ring structures and types.
+ */
+
+DEFINE_RING_TYPES(blkif, struct blkif_request, struct blkif_response);
+
+#define VDISK_CDROM        0x1
+#define VDISK_REMOVABLE    0x2
+#define VDISK_READONLY     0x4
+
+/* Xen-defined major numbers for virtual disks, they look strangely
+ * familiar */
+#define XEN_IDE0_MAJOR	3
+#define XEN_IDE1_MAJOR	22
+#define XEN_SCSI_DISK0_MAJOR	8
+#define XEN_SCSI_DISK1_MAJOR	65
+#define XEN_SCSI_DISK2_MAJOR	66
+#define XEN_SCSI_DISK3_MAJOR	67
+#define XEN_SCSI_DISK4_MAJOR	68
+#define XEN_SCSI_DISK5_MAJOR	69
+#define XEN_SCSI_DISK6_MAJOR	70
+#define XEN_SCSI_DISK7_MAJOR	71
+#define XEN_SCSI_DISK8_MAJOR	128
+#define XEN_SCSI_DISK9_MAJOR	129
+#define XEN_SCSI_DISK10_MAJOR	130
+#define XEN_SCSI_DISK11_MAJOR	131
+#define XEN_SCSI_DISK12_MAJOR	132
+#define XEN_SCSI_DISK13_MAJOR	133
+#define XEN_SCSI_DISK14_MAJOR	134
+#define XEN_SCSI_DISK15_MAJOR	135
+
+#endif /* __XEN_PUBLIC_IO_BLKIF_H__ */
diff --git a/include/xen/interface/io/console.h b/include/xen/interface/io/console.h
new file mode 100644
index 00000000..e563de70
--- /dev/null
+++ b/include/xen/interface/io/console.h
@@ -0,0 +1,23 @@
+/******************************************************************************
+ * console.h
+ *
+ * Console I/O interface for Xen guest OSes.
+ *
+ * Copyright (c) 2005, Keir Fraser
+ */
+
+#ifndef __XEN_PUBLIC_IO_CONSOLE_H__
+#define __XEN_PUBLIC_IO_CONSOLE_H__
+
+typedef uint32_t XENCONS_RING_IDX;
+
+#define MASK_XENCONS_IDX(idx, ring) ((idx) & (sizeof(ring)-1))
+
+struct xencons_interface {
+    char in[1024];
+    char out[2048];
+    XENCONS_RING_IDX in_cons, in_prod;
+    XENCONS_RING_IDX out_cons, out_prod;
+};
+
+#endif /* __XEN_PUBLIC_IO_CONSOLE_H__ */
diff --git a/include/xen/interface/io/fbif.h b/include/xen/interface/io/fbif.h
new file mode 100644
index 00000000..974a51ed
--- /dev/null
+++ b/include/xen/interface/io/fbif.h
@@ -0,0 +1,143 @@
+/*
+ * fbif.h -- Xen virtual frame buffer device
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Copyright (C) 2005 Anthony Liguori <aliguori@us.ibm.com>
+ * Copyright (C) 2006 Red Hat, Inc., Markus Armbruster <armbru@redhat.com>
+ */
+
+#ifndef __XEN_PUBLIC_IO_FBIF_H__
+#define __XEN_PUBLIC_IO_FBIF_H__
+
+/* Out events (frontend -> backend) */
+
+/*
+ * Out events may be sent only when requested by backend, and receipt
+ * of an unknown out event is an error.
+ */
+
+/* Event type 1 currently not used */
+/*
+ * Framebuffer update notification event
+ * Capable frontend sets feature-update in xenstore.
+ * Backend requests it by setting request-update in xenstore.
+ */
+#define XENFB_TYPE_UPDATE 2
+
+struct xenfb_update {
+	uint8_t type;		/* XENFB_TYPE_UPDATE */
+	int32_t x;		/* source x */
+	int32_t y;		/* source y */
+	int32_t width;		/* rect width */
+	int32_t height;		/* rect height */
+};
+
+/*
+ * Framebuffer resize notification event
+ * Capable backend sets feature-resize in xenstore.
+ */
+#define XENFB_TYPE_RESIZE 3
+
+struct xenfb_resize {
+	uint8_t type;		/* XENFB_TYPE_RESIZE */
+	int32_t width;		/* width in pixels */
+	int32_t height;		/* height in pixels */
+	int32_t stride;		/* stride in bytes */
+	int32_t depth;		/* depth in bits */
+	int32_t offset;		/* start offset within framebuffer */
+};
+
+#define XENFB_OUT_EVENT_SIZE 40
+
+union xenfb_out_event {
+	uint8_t type;
+	struct xenfb_update update;
+	struct xenfb_resize resize;
+	char pad[XENFB_OUT_EVENT_SIZE];
+};
+
+/* In events (backend -> frontend) */
+
+/*
+ * Frontends should ignore unknown in events.
+ * No in events currently defined.
+ */
+
+#define XENFB_IN_EVENT_SIZE 40
+
+union xenfb_in_event {
+	uint8_t type;
+	char pad[XENFB_IN_EVENT_SIZE];
+};
+
+/* shared page */
+
+#define XENFB_IN_RING_SIZE 1024
+#define XENFB_IN_RING_LEN (XENFB_IN_RING_SIZE / XENFB_IN_EVENT_SIZE)
+#define XENFB_IN_RING_OFFS 1024
+#define XENFB_IN_RING(page) \
+	((union xenfb_in_event *)((char *)(page) + XENFB_IN_RING_OFFS))
+#define XENFB_IN_RING_REF(page, idx) \
+	(XENFB_IN_RING((page))[(idx) % XENFB_IN_RING_LEN])
+
+#define XENFB_OUT_RING_SIZE 2048
+#define XENFB_OUT_RING_LEN (XENFB_OUT_RING_SIZE / XENFB_OUT_EVENT_SIZE)
+#define XENFB_OUT_RING_OFFS (XENFB_IN_RING_OFFS + XENFB_IN_RING_SIZE)
+#define XENFB_OUT_RING(page) \
+	((union xenfb_out_event *)((char *)(page) + XENFB_OUT_RING_OFFS))
+#define XENFB_OUT_RING_REF(page, idx) \
+	(XENFB_OUT_RING((page))[(idx) % XENFB_OUT_RING_LEN])
+
+struct xenfb_page {
+	uint32_t in_cons, in_prod;
+	uint32_t out_cons, out_prod;
+
+	int32_t width;          /* width of the framebuffer (in pixels) */
+	int32_t height;         /* height of the framebuffer (in pixels) */
+	uint32_t line_length;   /* length of a row of pixels (in bytes) */
+	uint32_t mem_length;    /* length of the framebuffer (in bytes) */
+	uint8_t depth;          /* depth of a pixel (in bits) */
+
+	/*
+	 * Framebuffer page directory
+	 *
+	 * Each directory page holds PAGE_SIZE / sizeof(*pd)
+	 * framebuffer pages, and can thus map up to PAGE_SIZE *
+	 * PAGE_SIZE / sizeof(*pd) bytes.  With PAGE_SIZE == 4096 and
+	 * sizeof(unsigned long) == 4/8, that's 4 Megs 32 bit and 2
+	 * Megs 64 bit.  256 directories give enough room for a 512
+	 * Meg framebuffer with a max resolution of 12,800x10,240.
+	 * Should be enough for a while with room leftover for
+	 * expansion.
+	 */
+	unsigned long pd[256];
+};
+
+/*
+ * Wart: xenkbd needs to know default resolution.  Put it here until a
+ * better solution is found, but don't leak it to the backend.
+ */
+#ifdef __KERNEL__
+#define XENFB_WIDTH 800
+#define XENFB_HEIGHT 600
+#define XENFB_DEPTH 32
+#endif
+
+#endif
diff --git a/include/xen/interface/io/kbdif.h b/include/xen/interface/io/kbdif.h
new file mode 100644
index 00000000..8066c784
--- /dev/null
+++ b/include/xen/interface/io/kbdif.h
@@ -0,0 +1,116 @@
+/*
+ * kbdif.h -- Xen virtual keyboard/mouse
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Copyright (C) 2005 Anthony Liguori <aliguori@us.ibm.com>
+ * Copyright (C) 2006 Red Hat, Inc., Markus Armbruster <armbru@redhat.com>
+ */
+
+#ifndef __XEN_PUBLIC_IO_KBDIF_H__
+#define __XEN_PUBLIC_IO_KBDIF_H__
+
+/* In events (backend -> frontend) */
+
+/*
+ * Frontends should ignore unknown in events.
+ */
+
+/* Pointer movement event */
+#define XENKBD_TYPE_MOTION  1
+/* Event type 2 currently not used */
+/* Key event (includes pointer buttons) */
+#define XENKBD_TYPE_KEY     3
+/*
+ * Pointer position event
+ * Capable backend sets feature-abs-pointer in xenstore.
+ * Frontend requests ot instead of XENKBD_TYPE_MOTION by setting
+ * request-abs-update in xenstore.
+ */
+#define XENKBD_TYPE_POS     4
+
+struct xenkbd_motion {
+	uint8_t type;		/* XENKBD_TYPE_MOTION */
+	int32_t rel_x;		/* relative X motion */
+	int32_t rel_y;		/* relative Y motion */
+	int32_t rel_z;		/* relative Z motion (wheel) */
+};
+
+struct xenkbd_key {
+	uint8_t type;		/* XENKBD_TYPE_KEY */
+	uint8_t pressed;	/* 1 if pressed; 0 otherwise */
+	uint32_t keycode;	/* KEY_* from linux/input.h */
+};
+
+struct xenkbd_position {
+	uint8_t type;		/* XENKBD_TYPE_POS */
+	int32_t abs_x;		/* absolute X position (in FB pixels) */
+	int32_t abs_y;		/* absolute Y position (in FB pixels) */
+	int32_t rel_z;		/* relative Z motion (wheel) */
+};
+
+#define XENKBD_IN_EVENT_SIZE 40
+
+union xenkbd_in_event {
+	uint8_t type;
+	struct xenkbd_motion motion;
+	struct xenkbd_key key;
+	struct xenkbd_position pos;
+	char pad[XENKBD_IN_EVENT_SIZE];
+};
+
+/* Out events (frontend -> backend) */
+
+/*
+ * Out events may be sent only when requested by backend, and receipt
+ * of an unknown out event is an error.
+ * No out events currently defined.
+ */
+
+#define XENKBD_OUT_EVENT_SIZE 40
+
+union xenkbd_out_event {
+	uint8_t type;
+	char pad[XENKBD_OUT_EVENT_SIZE];
+};
+
+/* shared page */
+
+#define XENKBD_IN_RING_SIZE 2048
+#define XENKBD_IN_RING_LEN (XENKBD_IN_RING_SIZE / XENKBD_IN_EVENT_SIZE)
+#define XENKBD_IN_RING_OFFS 1024
+#define XENKBD_IN_RING(page) \
+	((union xenkbd_in_event *)((char *)(page) + XENKBD_IN_RING_OFFS))
+#define XENKBD_IN_RING_REF(page, idx) \
+	(XENKBD_IN_RING((page))[(idx) % XENKBD_IN_RING_LEN])
+
+#define XENKBD_OUT_RING_SIZE 1024
+#define XENKBD_OUT_RING_LEN (XENKBD_OUT_RING_SIZE / XENKBD_OUT_EVENT_SIZE)
+#define XENKBD_OUT_RING_OFFS (XENKBD_IN_RING_OFFS + XENKBD_IN_RING_SIZE)
+#define XENKBD_OUT_RING(page) \
+	((union xenkbd_out_event *)((char *)(page) + XENKBD_OUT_RING_OFFS))
+#define XENKBD_OUT_RING_REF(page, idx) \
+	(XENKBD_OUT_RING((page))[(idx) % XENKBD_OUT_RING_LEN])
+
+struct xenkbd_page {
+	uint32_t in_cons, in_prod;
+	uint32_t out_cons, out_prod;
+};
+
+#endif
diff --git a/include/xen/interface/io/netif.h b/include/xen/interface/io/netif.h
new file mode 100644
index 00000000..cb94668f
--- /dev/null
+++ b/include/xen/interface/io/netif.h
@@ -0,0 +1,162 @@
+/******************************************************************************
+ * netif.h
+ *
+ * Unified network-device I/O interface for Xen guest OSes.
+ *
+ * Copyright (c) 2003-2004, Keir Fraser
+ */
+
+#ifndef __XEN_PUBLIC_IO_NETIF_H__
+#define __XEN_PUBLIC_IO_NETIF_H__
+
+#include "ring.h"
+#include "../grant_table.h"
+
+/*
+ * Notifications after enqueuing any type of message should be conditional on
+ * the appropriate req_event or rsp_event field in the shared ring.
+ * If the client sends notification for rx requests then it should specify
+ * feature 'feature-rx-notify' via xenbus. Otherwise the backend will assume
+ * that it cannot safely queue packets (as it may not be kicked to send them).
+ */
+
+/*
+ * This is the 'wire' format for packets:
+ *  Request 1: xen_netif_tx_request  -- XEN_NETTXF_* (any flags)
+ * [Request 2: xen_netif_extra_info]    (only if request 1 has XEN_NETTXF_extra_info)
+ * [Request 3: xen_netif_extra_info]    (only if request 2 has XEN_NETIF_EXTRA_MORE)
+ *  Request 4: xen_netif_tx_request  -- XEN_NETTXF_more_data
+ *  Request 5: xen_netif_tx_request  -- XEN_NETTXF_more_data
+ *  ...
+ *  Request N: xen_netif_tx_request  -- 0
+ */
+
+/* Protocol checksum field is blank in the packet (hardware offload)? */
+#define _XEN_NETTXF_csum_blank		(0)
+#define  XEN_NETTXF_csum_blank		(1U<<_XEN_NETTXF_csum_blank)
+
+/* Packet data has been validated against protocol checksum. */
+#define _XEN_NETTXF_data_validated	(1)
+#define  XEN_NETTXF_data_validated	(1U<<_XEN_NETTXF_data_validated)
+
+/* Packet continues in the next request descriptor. */
+#define _XEN_NETTXF_more_data		(2)
+#define  XEN_NETTXF_more_data		(1U<<_XEN_NETTXF_more_data)
+
+/* Packet to be followed by extra descriptor(s). */
+#define _XEN_NETTXF_extra_info		(3)
+#define  XEN_NETTXF_extra_info		(1U<<_XEN_NETTXF_extra_info)
+
+struct xen_netif_tx_request {
+    grant_ref_t gref;      /* Reference to buffer page */
+    uint16_t offset;       /* Offset within buffer page */
+    uint16_t flags;        /* XEN_NETTXF_* */
+    uint16_t id;           /* Echoed in response message. */
+    uint16_t size;         /* Packet size in bytes.       */
+};
+
+/* Types of xen_netif_extra_info descriptors. */
+#define XEN_NETIF_EXTRA_TYPE_NONE	(0)  /* Never used - invalid */
+#define XEN_NETIF_EXTRA_TYPE_GSO	(1)  /* u.gso */
+#define XEN_NETIF_EXTRA_TYPE_MAX	(2)
+
+/* xen_netif_extra_info flags. */
+#define _XEN_NETIF_EXTRA_FLAG_MORE	(0)
+#define  XEN_NETIF_EXTRA_FLAG_MORE	(1U<<_XEN_NETIF_EXTRA_FLAG_MORE)
+
+/* GSO types - only TCPv4 currently supported. */
+#define XEN_NETIF_GSO_TYPE_TCPV4	(1)
+
+/*
+ * This structure needs to fit within both netif_tx_request and
+ * netif_rx_response for compatibility.
+ */
+struct xen_netif_extra_info {
+	uint8_t type;  /* XEN_NETIF_EXTRA_TYPE_* */
+	uint8_t flags; /* XEN_NETIF_EXTRA_FLAG_* */
+
+	union {
+		struct {
+			/*
+			 * Maximum payload size of each segment. For
+			 * example, for TCP this is just the path MSS.
+			 */
+			uint16_t size;
+
+			/*
+			 * GSO type. This determines the protocol of
+			 * the packet and any extra features required
+			 * to segment the packet properly.
+			 */
+			uint8_t type; /* XEN_NETIF_GSO_TYPE_* */
+
+			/* Future expansion. */
+			uint8_t pad;
+
+			/*
+			 * GSO features. This specifies any extra GSO
+			 * features required to process this packet,
+			 * such as ECN support for TCPv4.
+			 */
+			uint16_t features; /* XEN_NETIF_GSO_FEAT_* */
+		} gso;
+
+		uint16_t pad[3];
+	} u;
+};
+
+struct xen_netif_tx_response {
+	uint16_t id;
+	int16_t  status;       /* XEN_NETIF_RSP_* */
+};
+
+struct xen_netif_rx_request {
+	uint16_t    id;        /* Echoed in response message.        */
+	grant_ref_t gref;      /* Reference to incoming granted frame */
+};
+
+/* Packet data has been validated against protocol checksum. */
+#define _XEN_NETRXF_data_validated	(0)
+#define  XEN_NETRXF_data_validated	(1U<<_XEN_NETRXF_data_validated)
+
+/* Protocol checksum field is blank in the packet (hardware offload)? */
+#define _XEN_NETRXF_csum_blank		(1)
+#define  XEN_NETRXF_csum_blank		(1U<<_XEN_NETRXF_csum_blank)
+
+/* Packet continues in the next request descriptor. */
+#define _XEN_NETRXF_more_data		(2)
+#define  XEN_NETRXF_more_data		(1U<<_XEN_NETRXF_more_data)
+
+/* Packet to be followed by extra descriptor(s). */
+#define _XEN_NETRXF_extra_info		(3)
+#define  XEN_NETRXF_extra_info		(1U<<_XEN_NETRXF_extra_info)
+
+/* GSO Prefix descriptor. */
+#define _XEN_NETRXF_gso_prefix		(4)
+#define  XEN_NETRXF_gso_prefix		(1U<<_XEN_NETRXF_gso_prefix)
+
+struct xen_netif_rx_response {
+    uint16_t id;
+    uint16_t offset;       /* Offset in page of start of received packet  */
+    uint16_t flags;        /* XEN_NETRXF_* */
+    int16_t  status;       /* -ve: BLKIF_RSP_* ; +ve: Rx'ed pkt size. */
+};
+
+/*
+ * Generate netif ring structures and types.
+ */
+
+DEFINE_RING_TYPES(xen_netif_tx,
+		  struct xen_netif_tx_request,
+		  struct xen_netif_tx_response);
+DEFINE_RING_TYPES(xen_netif_rx,
+		  struct xen_netif_rx_request,
+		  struct xen_netif_rx_response);
+
+#define XEN_NETIF_RSP_DROPPED	-2
+#define XEN_NETIF_RSP_ERROR	-1
+#define XEN_NETIF_RSP_OKAY	 0
+/* No response: used for auxiliary requests (e.g., xen_netif_extra_info). */
+#define XEN_NETIF_RSP_NULL	 1
+
+#endif
diff --git a/include/xen/interface/io/pciif.h b/include/xen/interface/io/pciif.h
new file mode 100644
index 00000000..d9922ae3
--- /dev/null
+++ b/include/xen/interface/io/pciif.h
@@ -0,0 +1,112 @@
+/*
+ * PCI Backend/Frontend Common Data Structures & Macros
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ *   Author: Ryan Wilson <hap9@epoch.ncsc.mil>
+ */
+#ifndef __XEN_PCI_COMMON_H__
+#define __XEN_PCI_COMMON_H__
+
+/* Be sure to bump this number if you change this file */
+#define XEN_PCI_MAGIC "7"
+
+/* xen_pci_sharedinfo flags */
+#define	_XEN_PCIF_active		(0)
+#define	XEN_PCIF_active			(1<<_XEN_PCIF_active)
+#define	_XEN_PCIB_AERHANDLER		(1)
+#define	XEN_PCIB_AERHANDLER		(1<<_XEN_PCIB_AERHANDLER)
+#define	_XEN_PCIB_active		(2)
+#define	XEN_PCIB_active			(1<<_XEN_PCIB_active)
+
+/* xen_pci_op commands */
+#define	XEN_PCI_OP_conf_read		(0)
+#define	XEN_PCI_OP_conf_write		(1)
+#define	XEN_PCI_OP_enable_msi		(2)
+#define	XEN_PCI_OP_disable_msi		(3)
+#define	XEN_PCI_OP_enable_msix		(4)
+#define	XEN_PCI_OP_disable_msix		(5)
+#define	XEN_PCI_OP_aer_detected		(6)
+#define	XEN_PCI_OP_aer_resume		(7)
+#define	XEN_PCI_OP_aer_mmio		(8)
+#define	XEN_PCI_OP_aer_slotreset	(9)
+
+/* xen_pci_op error numbers */
+#define	XEN_PCI_ERR_success		(0)
+#define	XEN_PCI_ERR_dev_not_found	(-1)
+#define	XEN_PCI_ERR_invalid_offset	(-2)
+#define	XEN_PCI_ERR_access_denied	(-3)
+#define	XEN_PCI_ERR_not_implemented	(-4)
+/* XEN_PCI_ERR_op_failed - backend failed to complete the operation */
+#define XEN_PCI_ERR_op_failed		(-5)
+
+/*
+ * it should be PAGE_SIZE-sizeof(struct xen_pci_op))/sizeof(struct msix_entry))
+ * Should not exceed 128
+ */
+#define SH_INFO_MAX_VEC			128
+
+struct xen_msix_entry {
+	uint16_t vector;
+	uint16_t entry;
+};
+struct xen_pci_op {
+	/* IN: what action to perform: XEN_PCI_OP_* */
+	uint32_t cmd;
+
+	/* OUT: will contain an error number (if any) from errno.h */
+	int32_t err;
+
+	/* IN: which device to touch */
+	uint32_t domain; /* PCI Domain/Segment */
+	uint32_t bus;
+	uint32_t devfn;
+
+	/* IN: which configuration registers to touch */
+	int32_t offset;
+	int32_t size;
+
+	/* IN/OUT: Contains the result after a READ or the value to WRITE */
+	uint32_t value;
+	/* IN: Contains extra infor for this operation */
+	uint32_t info;
+	/*IN:  param for msi-x */
+	struct xen_msix_entry msix_entries[SH_INFO_MAX_VEC];
+};
+
+/*used for pcie aer handling*/
+struct xen_pcie_aer_op {
+	/* IN: what action to perform: XEN_PCI_OP_* */
+	uint32_t cmd;
+	/*IN/OUT: return aer_op result or carry error_detected state as input*/
+	int32_t err;
+
+	/* IN: which device to touch */
+	uint32_t domain; /* PCI Domain/Segment*/
+	uint32_t bus;
+	uint32_t devfn;
+};
+struct xen_pci_sharedinfo {
+	/* flags - XEN_PCIF_* */
+	uint32_t flags;
+	struct xen_pci_op op;
+	struct xen_pcie_aer_op aer_op;
+};
+
+#endif /* __XEN_PCI_COMMON_H__ */
diff --git a/include/xen/interface/io/protocols.h b/include/xen/interface/io/protocols.h
new file mode 100644
index 00000000..01fc8ae5
--- /dev/null
+++ b/include/xen/interface/io/protocols.h
@@ -0,0 +1,21 @@
+#ifndef __XEN_PROTOCOLS_H__
+#define __XEN_PROTOCOLS_H__
+
+#define XEN_IO_PROTO_ABI_X86_32     "x86_32-abi"
+#define XEN_IO_PROTO_ABI_X86_64     "x86_64-abi"
+#define XEN_IO_PROTO_ABI_IA64       "ia64-abi"
+#define XEN_IO_PROTO_ABI_POWERPC64  "powerpc64-abi"
+
+#if defined(__i386__)
+# define XEN_IO_PROTO_ABI_NATIVE XEN_IO_PROTO_ABI_X86_32
+#elif defined(__x86_64__)
+# define XEN_IO_PROTO_ABI_NATIVE XEN_IO_PROTO_ABI_X86_64
+#elif defined(__ia64__)
+# define XEN_IO_PROTO_ABI_NATIVE XEN_IO_PROTO_ABI_IA64
+#elif defined(__powerpc64__)
+# define XEN_IO_PROTO_ABI_NATIVE XEN_IO_PROTO_ABI_POWERPC64
+#else
+# error arch fixup needed here
+#endif
+
+#endif
diff --git a/include/xen/interface/io/ring.h b/include/xen/interface/io/ring.h
new file mode 100644
index 00000000..75271b9a
--- /dev/null
+++ b/include/xen/interface/io/ring.h
@@ -0,0 +1,267 @@
+/******************************************************************************
+ * ring.h
+ *
+ * Shared producer-consumer ring macros.
+ *
+ * Tim Deegan and Andrew Warfield November 2004.
+ */
+
+#ifndef __XEN_PUBLIC_IO_RING_H__
+#define __XEN_PUBLIC_IO_RING_H__
+
+typedef unsigned int RING_IDX;
+
+/* Round a 32-bit unsigned constant down to the nearest power of two. */
+#define __RD2(_x)  (((_x) & 0x00000002) ? 0x2		       : ((_x) & 0x1))
+#define __RD4(_x)  (((_x) & 0x0000000c) ? __RD2((_x)>>2)<<2    : __RD2(_x))
+#define __RD8(_x)  (((_x) & 0x000000f0) ? __RD4((_x)>>4)<<4    : __RD4(_x))
+#define __RD16(_x) (((_x) & 0x0000ff00) ? __RD8((_x)>>8)<<8    : __RD8(_x))
+#define __RD32(_x) (((_x) & 0xffff0000) ? __RD16((_x)>>16)<<16 : __RD16(_x))
+
+/*
+ * Calculate size of a shared ring, given the total available space for the
+ * ring and indexes (_sz), and the name tag of the request/response structure.
+ * A ring contains as many entries as will fit, rounded down to the nearest
+ * power of two (so we can mask with (size-1) to loop around).
+ */
+#define __CONST_RING_SIZE(_s, _sz)				\
+	(__RD32(((_sz) - offsetof(struct _s##_sring, ring)) /	\
+		sizeof(((struct _s##_sring *)0)->ring[0])))
+
+/*
+ * The same for passing in an actual pointer instead of a name tag.
+ */
+#define __RING_SIZE(_s, _sz)						\
+	(__RD32(((_sz) - (long)&(_s)->ring + (long)(_s)) / sizeof((_s)->ring[0])))
+
+/*
+ * Macros to make the correct C datatypes for a new kind of ring.
+ *
+ * To make a new ring datatype, you need to have two message structures,
+ * let's say struct request, and struct response already defined.
+ *
+ * In a header where you want the ring datatype declared, you then do:
+ *
+ *     DEFINE_RING_TYPES(mytag, struct request, struct response);
+ *
+ * These expand out to give you a set of types, as you can see below.
+ * The most important of these are:
+ *
+ *     struct mytag_sring      - The shared ring.
+ *     struct mytag_front_ring - The 'front' half of the ring.
+ *     struct mytag_back_ring  - The 'back' half of the ring.
+ *
+ * To initialize a ring in your code you need to know the location and size
+ * of the shared memory area (PAGE_SIZE, for instance). To initialise
+ * the front half:
+ *
+ *     struct mytag_front_ring front_ring;
+ *     SHARED_RING_INIT((struct mytag_sring *)shared_page);
+ *     FRONT_RING_INIT(&front_ring, (struct mytag_sring *)shared_page,
+ *		       PAGE_SIZE);
+ *
+ * Initializing the back follows similarly (note that only the front
+ * initializes the shared ring):
+ *
+ *     struct mytag_back_ring back_ring;
+ *     BACK_RING_INIT(&back_ring, (struct mytag_sring *)shared_page,
+ *		      PAGE_SIZE);
+ */
+
+#define DEFINE_RING_TYPES(__name, __req_t, __rsp_t)			\
+									\
+/* Shared ring entry */							\
+union __name##_sring_entry {						\
+    __req_t req;							\
+    __rsp_t rsp;							\
+};									\
+									\
+/* Shared ring page */							\
+struct __name##_sring {							\
+    RING_IDX req_prod, req_event;					\
+    RING_IDX rsp_prod, rsp_event;					\
+    uint8_t  pad[48];							\
+    union __name##_sring_entry ring[1]; /* variable-length */		\
+};									\
+									\
+/* "Front" end's private variables */					\
+struct __name##_front_ring {						\
+    RING_IDX req_prod_pvt;						\
+    RING_IDX rsp_cons;							\
+    unsigned int nr_ents;						\
+    struct __name##_sring *sring;					\
+};									\
+									\
+/* "Back" end's private variables */					\
+struct __name##_back_ring {						\
+    RING_IDX rsp_prod_pvt;						\
+    RING_IDX req_cons;							\
+    unsigned int nr_ents;						\
+    struct __name##_sring *sring;					\
+};
+
+/*
+ * Macros for manipulating rings.
+ *
+ * FRONT_RING_whatever works on the "front end" of a ring: here
+ * requests are pushed on to the ring and responses taken off it.
+ *
+ * BACK_RING_whatever works on the "back end" of a ring: here
+ * requests are taken off the ring and responses put on.
+ *
+ * N.B. these macros do NO INTERLOCKS OR FLOW CONTROL.
+ * This is OK in 1-for-1 request-response situations where the
+ * requestor (front end) never has more than RING_SIZE()-1
+ * outstanding requests.
+ */
+
+/* Initialising empty rings */
+#define SHARED_RING_INIT(_s) do {					\
+    (_s)->req_prod  = (_s)->rsp_prod  = 0;				\
+    (_s)->req_event = (_s)->rsp_event = 1;				\
+    memset((_s)->pad, 0, sizeof((_s)->pad));				\
+} while(0)
+
+#define FRONT_RING_INIT(_r, _s, __size) do {				\
+    (_r)->req_prod_pvt = 0;						\
+    (_r)->rsp_cons = 0;							\
+    (_r)->nr_ents = __RING_SIZE(_s, __size);				\
+    (_r)->sring = (_s);							\
+} while (0)
+
+#define BACK_RING_INIT(_r, _s, __size) do {				\
+    (_r)->rsp_prod_pvt = 0;						\
+    (_r)->req_cons = 0;							\
+    (_r)->nr_ents = __RING_SIZE(_s, __size);				\
+    (_r)->sring = (_s);							\
+} while (0)
+
+/* Initialize to existing shared indexes -- for recovery */
+#define FRONT_RING_ATTACH(_r, _s, __size) do {				\
+    (_r)->sring = (_s);							\
+    (_r)->req_prod_pvt = (_s)->req_prod;				\
+    (_r)->rsp_cons = (_s)->rsp_prod;					\
+    (_r)->nr_ents = __RING_SIZE(_s, __size);				\
+} while (0)
+
+#define BACK_RING_ATTACH(_r, _s, __size) do {				\
+    (_r)->sring = (_s);							\
+    (_r)->rsp_prod_pvt = (_s)->rsp_prod;				\
+    (_r)->req_cons = (_s)->req_prod;					\
+    (_r)->nr_ents = __RING_SIZE(_s, __size);				\
+} while (0)
+
+/* How big is this ring? */
+#define RING_SIZE(_r)							\
+    ((_r)->nr_ents)
+
+/* Number of free requests (for use on front side only). */
+#define RING_FREE_REQUESTS(_r)						\
+    (RING_SIZE(_r) - ((_r)->req_prod_pvt - (_r)->rsp_cons))
+
+/* Test if there is an empty slot available on the front ring.
+ * (This is only meaningful from the front. )
+ */
+#define RING_FULL(_r)							\
+    (RING_FREE_REQUESTS(_r) == 0)
+
+/* Test if there are outstanding messages to be processed on a ring. */
+#define RING_HAS_UNCONSUMED_RESPONSES(_r)				\
+    ((_r)->sring->rsp_prod - (_r)->rsp_cons)
+
+#define RING_HAS_UNCONSUMED_REQUESTS(_r)				\
+    ({									\
+	unsigned int req = (_r)->sring->req_prod - (_r)->req_cons;	\
+	unsigned int rsp = RING_SIZE(_r) -				\
+			   ((_r)->req_cons - (_r)->rsp_prod_pvt);	\
+	req < rsp ? req : rsp;						\
+    })
+
+/* Direct access to individual ring elements, by index. */
+#define RING_GET_REQUEST(_r, _idx)					\
+    (&((_r)->sring->ring[((_idx) & (RING_SIZE(_r) - 1))].req))
+
+#define RING_GET_RESPONSE(_r, _idx)					\
+    (&((_r)->sring->ring[((_idx) & (RING_SIZE(_r) - 1))].rsp))
+
+/* Loop termination condition: Would the specified index overflow the ring? */
+#define RING_REQUEST_CONS_OVERFLOW(_r, _cons)				\
+    (((_cons) - (_r)->rsp_prod_pvt) >= RING_SIZE(_r))
+
+#define RING_PUSH_REQUESTS(_r) do {					\
+    wmb(); /* back sees requests /before/ updated producer index */	\
+    (_r)->sring->req_prod = (_r)->req_prod_pvt;				\
+} while (0)
+
+#define RING_PUSH_RESPONSES(_r) do {					\
+    wmb(); /* front sees responses /before/ updated producer index */	\
+    (_r)->sring->rsp_prod = (_r)->rsp_prod_pvt;				\
+} while (0)
+
+/*
+ * Notification hold-off (req_event and rsp_event):
+ *
+ * When queueing requests or responses on a shared ring, it may not always be
+ * necessary to notify the remote end. For example, if requests are in flight
+ * in a backend, the front may be able to queue further requests without
+ * notifying the back (if the back checks for new requests when it queues
+ * responses).
+ *
+ * When enqueuing requests or responses:
+ *
+ *  Use RING_PUSH_{REQUESTS,RESPONSES}_AND_CHECK_NOTIFY(). The second argument
+ *  is a boolean return value. True indicates that the receiver requires an
+ *  asynchronous notification.
+ *
+ * After dequeuing requests or responses (before sleeping the connection):
+ *
+ *  Use RING_FINAL_CHECK_FOR_REQUESTS() or RING_FINAL_CHECK_FOR_RESPONSES().
+ *  The second argument is a boolean return value. True indicates that there
+ *  are pending messages on the ring (i.e., the connection should not be put
+ *  to sleep).
+ *
+ *  These macros will set the req_event/rsp_event field to trigger a
+ *  notification on the very next message that is enqueued. If you want to
+ *  create batches of work (i.e., only receive a notification after several
+ *  messages have been enqueued) then you will need to create a customised
+ *  version of the FINAL_CHECK macro in your own code, which sets the event
+ *  field appropriately.
+ */
+
+#define RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(_r, _notify) do {		\
+    RING_IDX __old = (_r)->sring->req_prod;				\
+    RING_IDX __new = (_r)->req_prod_pvt;				\
+    wmb(); /* back sees requests /before/ updated producer index */	\
+    (_r)->sring->req_prod = __new;					\
+    mb(); /* back sees new requests /before/ we check req_event */	\
+    (_notify) = ((RING_IDX)(__new - (_r)->sring->req_event) <		\
+		 (RING_IDX)(__new - __old));				\
+} while (0)
+
+#define RING_PUSH_RESPONSES_AND_CHECK_NOTIFY(_r, _notify) do {		\
+    RING_IDX __old = (_r)->sring->rsp_prod;				\
+    RING_IDX __new = (_r)->rsp_prod_pvt;				\
+    wmb(); /* front sees responses /before/ updated producer index */	\
+    (_r)->sring->rsp_prod = __new;					\
+    mb(); /* front sees new responses /before/ we check rsp_event */	\
+    (_notify) = ((RING_IDX)(__new - (_r)->sring->rsp_event) <		\
+		 (RING_IDX)(__new - __old));				\
+} while (0)
+
+#define RING_FINAL_CHECK_FOR_REQUESTS(_r, _work_to_do) do {		\
+    (_work_to_do) = RING_HAS_UNCONSUMED_REQUESTS(_r);			\
+    if (_work_to_do) break;						\
+    (_r)->sring->req_event = (_r)->req_cons + 1;			\
+    mb();								\
+    (_work_to_do) = RING_HAS_UNCONSUMED_REQUESTS(_r);			\
+} while (0)
+
+#define RING_FINAL_CHECK_FOR_RESPONSES(_r, _work_to_do) do {		\
+    (_work_to_do) = RING_HAS_UNCONSUMED_RESPONSES(_r);			\
+    if (_work_to_do) break;						\
+    (_r)->sring->rsp_event = (_r)->rsp_cons + 1;			\
+    mb();								\
+    (_work_to_do) = RING_HAS_UNCONSUMED_RESPONSES(_r);			\
+} while (0)
+
+#endif /* __XEN_PUBLIC_IO_RING_H__ */
diff --git a/include/xen/interface/io/xenbus.h b/include/xen/interface/io/xenbus.h
new file mode 100644
index 00000000..9fda5329
--- /dev/null
+++ b/include/xen/interface/io/xenbus.h
@@ -0,0 +1,50 @@
+/*****************************************************************************
+ * xenbus.h
+ *
+ * Xenbus protocol details.
+ *
+ * Copyright (C) 2005 XenSource Ltd.
+ */
+
+#ifndef _XEN_PUBLIC_IO_XENBUS_H
+#define _XEN_PUBLIC_IO_XENBUS_H
+
+/* The state of either end of the Xenbus, i.e. the current communication
+   status of initialisation across the bus.  States here imply nothing about
+   the state of the connection between the driver and the kernel's device
+   layers.  */
+enum xenbus_state
+{
+	XenbusStateUnknown      = 0,
+	XenbusStateInitialising = 1,
+	XenbusStateInitWait     = 2,  /* Finished early
+					 initialisation, but waiting
+					 for information from the peer
+					 or hotplug scripts. */
+	XenbusStateInitialised  = 3,  /* Initialised and waiting for a
+					 connection from the peer. */
+	XenbusStateConnected    = 4,
+	XenbusStateClosing      = 5,  /* The device is being closed
+					 due to an error or an unplug
+					 event. */
+	XenbusStateClosed       = 6,
+
+	/*
+	* Reconfiguring: The device is being reconfigured.
+	*/
+	XenbusStateReconfiguring = 7,
+
+	XenbusStateReconfigured  = 8
+};
+
+#endif /* _XEN_PUBLIC_IO_XENBUS_H */
+
+/*
+ * Local variables:
+ *  c-file-style: "linux"
+ *  indent-tabs-mode: t
+ *  c-indent-level: 8
+ *  c-basic-offset: 8
+ *  tab-width: 8
+ * End:
+ */
diff --git a/include/xen/interface/io/xs_wire.h b/include/xen/interface/io/xs_wire.h
new file mode 100644
index 00000000..7cdfca24
--- /dev/null
+++ b/include/xen/interface/io/xs_wire.h
@@ -0,0 +1,93 @@
+/*
+ * Details of the "wire" protocol between Xen Store Daemon and client
+ * library or guest kernel.
+ * Copyright (C) 2005 Rusty Russell IBM Corporation
+ */
+
+#ifndef _XS_WIRE_H
+#define _XS_WIRE_H
+
+enum xsd_sockmsg_type
+{
+    XS_DEBUG,
+    XS_DIRECTORY,
+    XS_READ,
+    XS_GET_PERMS,
+    XS_WATCH,
+    XS_UNWATCH,
+    XS_TRANSACTION_START,
+    XS_TRANSACTION_END,
+    XS_INTRODUCE,
+    XS_RELEASE,
+    XS_GET_DOMAIN_PATH,
+    XS_WRITE,
+    XS_MKDIR,
+    XS_RM,
+    XS_SET_PERMS,
+    XS_WATCH_EVENT,
+    XS_ERROR,
+    XS_IS_DOMAIN_INTRODUCED,
+    XS_RESUME,
+    XS_SET_TARGET,
+    XS_RESTRICT
+};
+
+#define XS_WRITE_NONE "NONE"
+#define XS_WRITE_CREATE "CREATE"
+#define XS_WRITE_CREATE_EXCL "CREATE|EXCL"
+
+/* We hand errors as strings, for portability. */
+struct xsd_errors
+{
+    int errnum;
+    const char *errstring;
+};
+#define XSD_ERROR(x) { x, #x }
+static struct xsd_errors xsd_errors[] __attribute__((unused)) = {
+    XSD_ERROR(EINVAL),
+    XSD_ERROR(EACCES),
+    XSD_ERROR(EEXIST),
+    XSD_ERROR(EISDIR),
+    XSD_ERROR(ENOENT),
+    XSD_ERROR(ENOMEM),
+    XSD_ERROR(ENOSPC),
+    XSD_ERROR(EIO),
+    XSD_ERROR(ENOTEMPTY),
+    XSD_ERROR(ENOSYS),
+    XSD_ERROR(EROFS),
+    XSD_ERROR(EBUSY),
+    XSD_ERROR(EAGAIN),
+    XSD_ERROR(EISCONN)
+};
+
+struct xsd_sockmsg
+{
+    uint32_t type;  /* XS_??? */
+    uint32_t req_id;/* Request identifier, echoed in daemon's response.  */
+    uint32_t tx_id; /* Transaction id (0 if not related to a transaction). */
+    uint32_t len;   /* Length of data following this. */
+
+    /* Generally followed by nul-terminated string(s). */
+};
+
+enum xs_watch_type
+{
+    XS_WATCH_PATH = 0,
+    XS_WATCH_TOKEN
+};
+
+/* Inter-domain shared memory communications. */
+#define XENSTORE_RING_SIZE 1024
+typedef uint32_t XENSTORE_RING_IDX;
+#define MASK_XENSTORE_IDX(idx) ((idx) & (XENSTORE_RING_SIZE-1))
+struct xenstore_domain_interface {
+    char req[XENSTORE_RING_SIZE]; /* Requests to xenstore daemon. */
+    char rsp[XENSTORE_RING_SIZE]; /* Replies and async watch events. */
+    XENSTORE_RING_IDX req_cons, req_prod;
+    XENSTORE_RING_IDX rsp_cons, rsp_prod;
+};
+
+/* Violating this is very bad.  See docs/misc/xenstore.txt. */
+#define XENSTORE_PAYLOAD_MAX 4096
+
+#endif /* _XS_WIRE_H */
diff --git a/include/xen/interface/memory.h b/include/xen/interface/memory.h
new file mode 100644
index 00000000..eac3ce15
--- /dev/null
+++ b/include/xen/interface/memory.h
@@ -0,0 +1,237 @@
+/******************************************************************************
+ * memory.h
+ *
+ * Memory reservation and information.
+ *
+ * Copyright (c) 2005, Keir Fraser <keir@xensource.com>
+ */
+
+#ifndef __XEN_PUBLIC_MEMORY_H__
+#define __XEN_PUBLIC_MEMORY_H__
+
+#include <linux/spinlock.h>
+
+/*
+ * Increase or decrease the specified domain's memory reservation. Returns a
+ * -ve errcode on failure, or the # extents successfully allocated or freed.
+ * arg == addr of struct xen_memory_reservation.
+ */
+#define XENMEM_increase_reservation 0
+#define XENMEM_decrease_reservation 1
+#define XENMEM_populate_physmap     6
+struct xen_memory_reservation {
+
+    /*
+     * XENMEM_increase_reservation:
+     *   OUT: MFN (*not* GMFN) bases of extents that were allocated
+     * XENMEM_decrease_reservation:
+     *   IN:  GMFN bases of extents to free
+     * XENMEM_populate_physmap:
+     *   IN:  GPFN bases of extents to populate with memory
+     *   OUT: GMFN bases of extents that were allocated
+     *   (NB. This command also updates the mach_to_phys translation table)
+     */
+    GUEST_HANDLE(ulong) extent_start;
+
+    /* Number of extents, and size/alignment of each (2^extent_order pages). */
+    unsigned long  nr_extents;
+    unsigned int   extent_order;
+
+    /*
+     * Maximum # bits addressable by the user of the allocated region (e.g.,
+     * I/O devices often have a 32-bit limitation even in 64-bit systems). If
+     * zero then the user has no addressing restriction.
+     * This field is not used by XENMEM_decrease_reservation.
+     */
+    unsigned int   address_bits;
+
+    /*
+     * Domain whose reservation is being changed.
+     * Unprivileged domains can specify only DOMID_SELF.
+     */
+    domid_t        domid;
+
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_memory_reservation);
+
+/*
+ * An atomic exchange of memory pages. If return code is zero then
+ * @out.extent_list provides GMFNs of the newly-allocated memory.
+ * Returns zero on complete success, otherwise a negative error code.
+ * On complete success then always @nr_exchanged == @in.nr_extents.
+ * On partial success @nr_exchanged indicates how much work was done.
+ */
+#define XENMEM_exchange             11
+struct xen_memory_exchange {
+    /*
+     * [IN] Details of memory extents to be exchanged (GMFN bases).
+     * Note that @in.address_bits is ignored and unused.
+     */
+    struct xen_memory_reservation in;
+
+    /*
+     * [IN/OUT] Details of new memory extents.
+     * We require that:
+     *  1. @in.domid == @out.domid
+     *  2. @in.nr_extents  << @in.extent_order ==
+     *     @out.nr_extents << @out.extent_order
+     *  3. @in.extent_start and @out.extent_start lists must not overlap
+     *  4. @out.extent_start lists GPFN bases to be populated
+     *  5. @out.extent_start is overwritten with allocated GMFN bases
+     */
+    struct xen_memory_reservation out;
+
+    /*
+     * [OUT] Number of input extents that were successfully exchanged:
+     *  1. The first @nr_exchanged input extents were successfully
+     *     deallocated.
+     *  2. The corresponding first entries in the output extent list correctly
+     *     indicate the GMFNs that were successfully exchanged.
+     *  3. All other input and output extents are untouched.
+     *  4. If not all input exents are exchanged then the return code of this
+     *     command will be non-zero.
+     *  5. THIS FIELD MUST BE INITIALISED TO ZERO BY THE CALLER!
+     */
+    unsigned long nr_exchanged;
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(xen_memory_exchange);
+/*
+ * Returns the maximum machine frame number of mapped RAM in this system.
+ * This command always succeeds (it never returns an error code).
+ * arg == NULL.
+ */
+#define XENMEM_maximum_ram_page     2
+
+/*
+ * Returns the current or maximum memory reservation, in pages, of the
+ * specified domain (may be DOMID_SELF). Returns -ve errcode on failure.
+ * arg == addr of domid_t.
+ */
+#define XENMEM_current_reservation  3
+#define XENMEM_maximum_reservation  4
+
+/*
+ * Returns a list of MFN bases of 2MB extents comprising the machine_to_phys
+ * mapping table. Architectures which do not have a m2p table do not implement
+ * this command.
+ * arg == addr of xen_machphys_mfn_list_t.
+ */
+#define XENMEM_machphys_mfn_list    5
+struct xen_machphys_mfn_list {
+    /*
+     * Size of the 'extent_start' array. Fewer entries will be filled if the
+     * machphys table is smaller than max_extents * 2MB.
+     */
+    unsigned int max_extents;
+
+    /*
+     * Pointer to buffer to fill with list of extent starts. If there are
+     * any large discontiguities in the machine address space, 2MB gaps in
+     * the machphys table will be represented by an MFN base of zero.
+     */
+    GUEST_HANDLE(ulong) extent_start;
+
+    /*
+     * Number of extents written to the above array. This will be smaller
+     * than 'max_extents' if the machphys table is smaller than max_e * 2MB.
+     */
+    unsigned int nr_extents;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_machphys_mfn_list);
+
+/*
+ * Returns the location in virtual address space of the machine_to_phys
+ * mapping table. Architectures which do not have a m2p table, or which do not
+ * map it by default into guest address space, do not implement this command.
+ * arg == addr of xen_machphys_mapping_t.
+ */
+#define XENMEM_machphys_mapping     12
+struct xen_machphys_mapping {
+    unsigned long v_start, v_end; /* Start and end virtual addresses.   */
+    unsigned long max_mfn;        /* Maximum MFN that can be looked up. */
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_machphys_mapping_t);
+
+/*
+ * Sets the GPFN at which a particular page appears in the specified guest's
+ * pseudophysical address space.
+ * arg == addr of xen_add_to_physmap_t.
+ */
+#define XENMEM_add_to_physmap      7
+struct xen_add_to_physmap {
+    /* Which domain to change the mapping for. */
+    domid_t domid;
+
+    /* Source mapping space. */
+#define XENMAPSPACE_shared_info 0 /* shared info page */
+#define XENMAPSPACE_grant_table 1 /* grant table page */
+    unsigned int space;
+
+    /* Index into source mapping space. */
+    unsigned long idx;
+
+    /* GPFN where the source mapping page should appear. */
+    unsigned long gpfn;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_add_to_physmap);
+
+/*
+ * Translates a list of domain-specific GPFNs into MFNs. Returns a -ve error
+ * code on failure. This call only works for auto-translated guests.
+ */
+#define XENMEM_translate_gpfn_list  8
+struct xen_translate_gpfn_list {
+    /* Which domain to translate for? */
+    domid_t domid;
+
+    /* Length of list. */
+    unsigned long nr_gpfns;
+
+    /* List of GPFNs to translate. */
+    GUEST_HANDLE(ulong) gpfn_list;
+
+    /*
+     * Output list to contain MFN translations. May be the same as the input
+     * list (in which case each input GPFN is overwritten with the output MFN).
+     */
+    GUEST_HANDLE(ulong) mfn_list;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_translate_gpfn_list);
+
+/*
+ * Returns the pseudo-physical memory map as it was when the domain
+ * was started (specified by XENMEM_set_memory_map).
+ * arg == addr of struct xen_memory_map.
+ */
+#define XENMEM_memory_map           9
+struct xen_memory_map {
+    /*
+     * On call the number of entries which can be stored in buffer. On
+     * return the number of entries which have been stored in
+     * buffer.
+     */
+    unsigned int nr_entries;
+
+    /*
+     * Entries in the buffer are in the same format as returned by the
+     * BIOS INT 0x15 EAX=0xE820 call.
+     */
+    GUEST_HANDLE(void) buffer;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_memory_map);
+
+/*
+ * Returns the real physical memory map. Passes the same structure as
+ * XENMEM_memory_map.
+ * arg == addr of struct xen_memory_map.
+ */
+#define XENMEM_machine_memory_map   10
+
+
+/*
+ * Prevent the balloon driver from changing the memory reservation
+ * during a driver critical region.
+ */
+extern spinlock_t xen_reservation_lock;
+#endif /* __XEN_PUBLIC_MEMORY_H__ */
diff --git a/include/xen/interface/physdev.h b/include/xen/interface/physdev.h
new file mode 100644
index 00000000..9ce788d8
--- /dev/null
+++ b/include/xen/interface/physdev.h
@@ -0,0 +1,282 @@
+/*
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef __XEN_PUBLIC_PHYSDEV_H__
+#define __XEN_PUBLIC_PHYSDEV_H__
+
+/*
+ * Prototype for this hypercall is:
+ *  int physdev_op(int cmd, void *args)
+ * @cmd	 == PHYSDEVOP_??? (physdev operation).
+ * @args == Operation-specific extra arguments (NULL if none).
+ */
+
+/*
+ * Notify end-of-interrupt (EOI) for the specified IRQ.
+ * @arg == pointer to physdev_eoi structure.
+ */
+#define PHYSDEVOP_eoi			12
+struct physdev_eoi {
+	/* IN */
+	uint32_t irq;
+};
+
+/*
+ * Register a shared page for the hypervisor to indicate whether the guest
+ * must issue PHYSDEVOP_eoi. The semantics of PHYSDEVOP_eoi change slightly
+ * once the guest used this function in that the associated event channel
+ * will automatically get unmasked. The page registered is used as a bit
+ * array indexed by Xen's PIRQ value.
+ */
+#define PHYSDEVOP_pirq_eoi_gmfn_v1       17
+/*
+ * Register a shared page for the hypervisor to indicate whether the
+ * guest must issue PHYSDEVOP_eoi. This hypercall is very similar to
+ * PHYSDEVOP_pirq_eoi_gmfn_v1 but it doesn't change the semantics of
+ * PHYSDEVOP_eoi. The page registered is used as a bit array indexed by
+ * Xen's PIRQ value.
+ */
+#define PHYSDEVOP_pirq_eoi_gmfn_v2       28
+struct physdev_pirq_eoi_gmfn {
+    /* IN */
+    unsigned long gmfn;
+};
+
+/*
+ * Query the status of an IRQ line.
+ * @arg == pointer to physdev_irq_status_query structure.
+ */
+#define PHYSDEVOP_irq_status_query	 5
+struct physdev_irq_status_query {
+	/* IN */
+	uint32_t irq;
+	/* OUT */
+	uint32_t flags; /* XENIRQSTAT_* */
+};
+
+/* Need to call PHYSDEVOP_eoi when the IRQ has been serviced? */
+#define _XENIRQSTAT_needs_eoi	(0)
+#define	 XENIRQSTAT_needs_eoi	(1U<<_XENIRQSTAT_needs_eoi)
+
+/* IRQ shared by multiple guests? */
+#define _XENIRQSTAT_shared	(1)
+#define	 XENIRQSTAT_shared	(1U<<_XENIRQSTAT_shared)
+
+/*
+ * Set the current VCPU's I/O privilege level.
+ * @arg == pointer to physdev_set_iopl structure.
+ */
+#define PHYSDEVOP_set_iopl		 6
+struct physdev_set_iopl {
+	/* IN */
+	uint32_t iopl;
+};
+
+/*
+ * Set the current VCPU's I/O-port permissions bitmap.
+ * @arg == pointer to physdev_set_iobitmap structure.
+ */
+#define PHYSDEVOP_set_iobitmap		 7
+struct physdev_set_iobitmap {
+	/* IN */
+	uint8_t * bitmap;
+	uint32_t nr_ports;
+};
+
+/*
+ * Read or write an IO-APIC register.
+ * @arg == pointer to physdev_apic structure.
+ */
+#define PHYSDEVOP_apic_read		 8
+#define PHYSDEVOP_apic_write		 9
+struct physdev_apic {
+	/* IN */
+	unsigned long apic_physbase;
+	uint32_t reg;
+	/* IN or OUT */
+	uint32_t value;
+};
+
+/*
+ * Allocate or free a physical upcall vector for the specified IRQ line.
+ * @arg == pointer to physdev_irq structure.
+ */
+#define PHYSDEVOP_alloc_irq_vector	10
+#define PHYSDEVOP_free_irq_vector	11
+struct physdev_irq {
+	/* IN */
+	uint32_t irq;
+	/* IN or OUT */
+	uint32_t vector;
+};
+
+#define MAP_PIRQ_TYPE_MSI		0x0
+#define MAP_PIRQ_TYPE_GSI		0x1
+#define MAP_PIRQ_TYPE_UNKNOWN		0x2
+#define MAP_PIRQ_TYPE_MSI_SEG		0x3
+
+#define PHYSDEVOP_map_pirq		13
+struct physdev_map_pirq {
+    domid_t domid;
+    /* IN */
+    int type;
+    /* IN */
+    int index;
+    /* IN or OUT */
+    int pirq;
+    /* IN - high 16 bits hold segment for MAP_PIRQ_TYPE_MSI_SEG */
+    int bus;
+    /* IN */
+    int devfn;
+    /* IN */
+    int entry_nr;
+    /* IN */
+    uint64_t table_base;
+};
+
+#define PHYSDEVOP_unmap_pirq		14
+struct physdev_unmap_pirq {
+    domid_t domid;
+    /* IN */
+    int pirq;
+};
+
+#define PHYSDEVOP_manage_pci_add	15
+#define PHYSDEVOP_manage_pci_remove	16
+struct physdev_manage_pci {
+	/* IN */
+	uint8_t bus;
+	uint8_t devfn;
+};
+
+#define PHYSDEVOP_restore_msi            19
+struct physdev_restore_msi {
+	/* IN */
+	uint8_t bus;
+	uint8_t devfn;
+};
+
+#define PHYSDEVOP_manage_pci_add_ext	20
+struct physdev_manage_pci_ext {
+	/* IN */
+	uint8_t bus;
+	uint8_t devfn;
+	unsigned is_extfn;
+	unsigned is_virtfn;
+	struct {
+		uint8_t bus;
+		uint8_t devfn;
+	} physfn;
+};
+
+/*
+ * Argument to physdev_op_compat() hypercall. Superceded by new physdev_op()
+ * hypercall since 0x00030202.
+ */
+struct physdev_op {
+	uint32_t cmd;
+	union {
+		struct physdev_irq_status_query	     irq_status_query;
+		struct physdev_set_iopl		     set_iopl;
+		struct physdev_set_iobitmap	     set_iobitmap;
+		struct physdev_apic		     apic_op;
+		struct physdev_irq		     irq_op;
+	} u;
+};
+
+#define PHYSDEVOP_setup_gsi    21
+struct physdev_setup_gsi {
+    int gsi;
+    /* IN */
+    uint8_t triggering;
+    /* IN */
+    uint8_t polarity;
+    /* IN */
+};
+
+#define PHYSDEVOP_get_nr_pirqs    22
+struct physdev_nr_pirqs {
+    /* OUT */
+    uint32_t nr_pirqs;
+};
+
+/* type is MAP_PIRQ_TYPE_GSI or MAP_PIRQ_TYPE_MSI
+ * the hypercall returns a free pirq */
+#define PHYSDEVOP_get_free_pirq    23
+struct physdev_get_free_pirq {
+    /* IN */ 
+    int type;
+    /* OUT */
+    uint32_t pirq;
+};
+
+#define XEN_PCI_DEV_EXTFN              0x1
+#define XEN_PCI_DEV_VIRTFN             0x2
+#define XEN_PCI_DEV_PXM                0x4
+
+#define PHYSDEVOP_pci_device_add        25
+struct physdev_pci_device_add {
+    /* IN */
+    uint16_t seg;
+    uint8_t bus;
+    uint8_t devfn;
+    uint32_t flags;
+    struct {
+        uint8_t bus;
+        uint8_t devfn;
+    } physfn;
+#if defined(__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
+    uint32_t optarr[];
+#elif defined(__GNUC__)
+    uint32_t optarr[0];
+#endif
+};
+
+#define PHYSDEVOP_pci_device_remove     26
+#define PHYSDEVOP_restore_msi_ext       27
+struct physdev_pci_device {
+    /* IN */
+    uint16_t seg;
+    uint8_t bus;
+    uint8_t devfn;
+};
+
+/*
+ * Notify that some PIRQ-bound event channels have been unmasked.
+ * ** This command is obsolete since interface version 0x00030202 and is **
+ * ** unsupported by newer versions of Xen.				 **
+ */
+#define PHYSDEVOP_IRQ_UNMASK_NOTIFY	 4
+
+/*
+ * These all-capitals physdev operation names are superceded by the new names
+ * (defined above) since interface version 0x00030202.
+ */
+#define PHYSDEVOP_IRQ_STATUS_QUERY	 PHYSDEVOP_irq_status_query
+#define PHYSDEVOP_SET_IOPL		 PHYSDEVOP_set_iopl
+#define PHYSDEVOP_SET_IOBITMAP		 PHYSDEVOP_set_iobitmap
+#define PHYSDEVOP_APIC_READ		 PHYSDEVOP_apic_read
+#define PHYSDEVOP_APIC_WRITE		 PHYSDEVOP_apic_write
+#define PHYSDEVOP_ASSIGN_VECTOR		 PHYSDEVOP_alloc_irq_vector
+#define PHYSDEVOP_FREE_VECTOR		 PHYSDEVOP_free_irq_vector
+#define PHYSDEVOP_IRQ_NEEDS_UNMASK_NOTIFY XENIRQSTAT_needs_eoi
+#define PHYSDEVOP_IRQ_SHARED		 XENIRQSTAT_shared
+
+#endif /* __XEN_PUBLIC_PHYSDEV_H__ */
diff --git a/include/xen/interface/platform.h b/include/xen/interface/platform.h
new file mode 100644
index 00000000..486653f0
--- /dev/null
+++ b/include/xen/interface/platform.h
@@ -0,0 +1,338 @@
+/******************************************************************************
+ * platform.h
+ *
+ * Hardware platform operations. Intended for use by domain-0 kernel.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Copyright (c) 2002-2006, K Fraser
+ */
+
+#ifndef __XEN_PUBLIC_PLATFORM_H__
+#define __XEN_PUBLIC_PLATFORM_H__
+
+#include "xen.h"
+
+#define XENPF_INTERFACE_VERSION 0x03000001
+
+/*
+ * Set clock such that it would read <secs,nsecs> after 00:00:00 UTC,
+ * 1 January, 1970 if the current system time was <system_time>.
+ */
+#define XENPF_settime             17
+struct xenpf_settime {
+	/* IN variables. */
+	uint32_t secs;
+	uint32_t nsecs;
+	uint64_t system_time;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_settime_t);
+
+/*
+ * Request memory range (@mfn, @mfn+@nr_mfns-1) to have type @type.
+ * On x86, @type is an architecture-defined MTRR memory type.
+ * On success, returns the MTRR that was used (@reg) and a handle that can
+ * be passed to XENPF_DEL_MEMTYPE to accurately tear down the new setting.
+ * (x86-specific).
+ */
+#define XENPF_add_memtype         31
+struct xenpf_add_memtype {
+	/* IN variables. */
+	unsigned long mfn;
+	uint64_t nr_mfns;
+	uint32_t type;
+	/* OUT variables. */
+	uint32_t handle;
+	uint32_t reg;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_add_memtype_t);
+
+/*
+ * Tear down an existing memory-range type. If @handle is remembered then it
+ * should be passed in to accurately tear down the correct setting (in case
+ * of overlapping memory regions with differing types). If it is not known
+ * then @handle should be set to zero. In all cases @reg must be set.
+ * (x86-specific).
+ */
+#define XENPF_del_memtype         32
+struct xenpf_del_memtype {
+	/* IN variables. */
+	uint32_t handle;
+	uint32_t reg;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_del_memtype_t);
+
+/* Read current type of an MTRR (x86-specific). */
+#define XENPF_read_memtype        33
+struct xenpf_read_memtype {
+	/* IN variables. */
+	uint32_t reg;
+	/* OUT variables. */
+	unsigned long mfn;
+	uint64_t nr_mfns;
+	uint32_t type;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_read_memtype_t);
+
+#define XENPF_microcode_update    35
+struct xenpf_microcode_update {
+	/* IN variables. */
+	GUEST_HANDLE(void) data;          /* Pointer to microcode data */
+	uint32_t length;                  /* Length of microcode data. */
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_microcode_update_t);
+
+#define XENPF_platform_quirk      39
+#define QUIRK_NOIRQBALANCING      1 /* Do not restrict IO-APIC RTE targets */
+#define QUIRK_IOAPIC_BAD_REGSEL   2 /* IO-APIC REGSEL forgets its value    */
+#define QUIRK_IOAPIC_GOOD_REGSEL  3 /* IO-APIC REGSEL behaves properly     */
+struct xenpf_platform_quirk {
+	/* IN variables. */
+	uint32_t quirk_id;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_platform_quirk_t);
+
+#define XENPF_firmware_info       50
+#define XEN_FW_DISK_INFO          1 /* from int 13 AH=08/41/48 */
+#define XEN_FW_DISK_MBR_SIGNATURE 2 /* from MBR offset 0x1b8 */
+#define XEN_FW_VBEDDC_INFO        3 /* from int 10 AX=4f15 */
+struct xenpf_firmware_info {
+	/* IN variables. */
+	uint32_t type;
+	uint32_t index;
+	/* OUT variables. */
+	union {
+		struct {
+			/* Int13, Fn48: Check Extensions Present. */
+			uint8_t device;                   /* %dl: bios device number */
+			uint8_t version;                  /* %ah: major version      */
+			uint16_t interface_support;       /* %cx: support bitmap     */
+			/* Int13, Fn08: Legacy Get Device Parameters. */
+			uint16_t legacy_max_cylinder;     /* %cl[7:6]:%ch: max cyl # */
+			uint8_t legacy_max_head;          /* %dh: max head #         */
+			uint8_t legacy_sectors_per_track; /* %cl[5:0]: max sector #  */
+			/* Int13, Fn41: Get Device Parameters (as filled into %ds:%esi). */
+			/* NB. First uint16_t of buffer must be set to buffer size.      */
+			GUEST_HANDLE(void) edd_params;
+		} disk_info; /* XEN_FW_DISK_INFO */
+		struct {
+			uint8_t device;                   /* bios device number  */
+			uint32_t mbr_signature;           /* offset 0x1b8 in mbr */
+		} disk_mbr_signature; /* XEN_FW_DISK_MBR_SIGNATURE */
+		struct {
+			/* Int10, AX=4F15: Get EDID info. */
+			uint8_t capabilities;
+			uint8_t edid_transfer_time;
+			/* must refer to 128-byte buffer */
+			GUEST_HANDLE(uchar) edid;
+		} vbeddc_info; /* XEN_FW_VBEDDC_INFO */
+	} u;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_firmware_info_t);
+
+#define XENPF_enter_acpi_sleep    51
+struct xenpf_enter_acpi_sleep {
+	/* IN variables */
+	uint16_t pm1a_cnt_val;      /* PM1a control value. */
+	uint16_t pm1b_cnt_val;      /* PM1b control value. */
+	uint32_t sleep_state;       /* Which state to enter (Sn). */
+	uint32_t flags;             /* Must be zero. */
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_enter_acpi_sleep_t);
+
+#define XENPF_change_freq         52
+struct xenpf_change_freq {
+	/* IN variables */
+	uint32_t flags; /* Must be zero. */
+	uint32_t cpu;   /* Physical cpu. */
+	uint64_t freq;  /* New frequency (Hz). */
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_change_freq_t);
+
+/*
+ * Get idle times (nanoseconds since boot) for physical CPUs specified in the
+ * @cpumap_bitmap with range [0..@cpumap_nr_cpus-1]. The @idletime array is
+ * indexed by CPU number; only entries with the corresponding @cpumap_bitmap
+ * bit set are written to. On return, @cpumap_bitmap is modified so that any
+ * non-existent CPUs are cleared. Such CPUs have their @idletime array entry
+ * cleared.
+ */
+#define XENPF_getidletime         53
+struct xenpf_getidletime {
+	/* IN/OUT variables */
+	/* IN: CPUs to interrogate; OUT: subset of IN which are present */
+	GUEST_HANDLE(uchar) cpumap_bitmap;
+	/* IN variables */
+	/* Size of cpumap bitmap. */
+	uint32_t cpumap_nr_cpus;
+	/* Must be indexable for every cpu in cpumap_bitmap. */
+	GUEST_HANDLE(uint64_t) idletime;
+	/* OUT variables */
+	/* System time when the idletime snapshots were taken. */
+	uint64_t now;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_getidletime_t);
+
+#define XENPF_set_processor_pminfo      54
+
+/* ability bits */
+#define XEN_PROCESSOR_PM_CX	1
+#define XEN_PROCESSOR_PM_PX	2
+#define XEN_PROCESSOR_PM_TX	4
+
+/* cmd type */
+#define XEN_PM_CX   0
+#define XEN_PM_PX   1
+#define XEN_PM_TX   2
+#define XEN_PM_PDC  3
+/* Px sub info type */
+#define XEN_PX_PCT   1
+#define XEN_PX_PSS   2
+#define XEN_PX_PPC   4
+#define XEN_PX_PSD   8
+
+struct xen_power_register {
+	uint32_t     space_id;
+	uint32_t     bit_width;
+	uint32_t     bit_offset;
+	uint32_t     access_size;
+	uint64_t     address;
+};
+
+struct xen_processor_csd {
+	uint32_t    domain;      /* domain number of one dependent group */
+	uint32_t    coord_type;  /* coordination type */
+	uint32_t    num;         /* number of processors in same domain */
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_processor_csd);
+
+struct xen_processor_cx {
+	struct xen_power_register  reg; /* GAS for Cx trigger register */
+	uint8_t     type;     /* cstate value, c0: 0, c1: 1, ... */
+	uint32_t    latency;  /* worst latency (ms) to enter/exit this cstate */
+	uint32_t    power;    /* average power consumption(mW) */
+	uint32_t    dpcnt;    /* number of dependency entries */
+	GUEST_HANDLE(xen_processor_csd) dp; /* NULL if no dependency */
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_processor_cx);
+
+struct xen_processor_flags {
+	uint32_t bm_control:1;
+	uint32_t bm_check:1;
+	uint32_t has_cst:1;
+	uint32_t power_setup_done:1;
+	uint32_t bm_rld_set:1;
+};
+
+struct xen_processor_power {
+	uint32_t count;  /* number of C state entries in array below */
+	struct xen_processor_flags flags;  /* global flags of this processor */
+	GUEST_HANDLE(xen_processor_cx) states; /* supported c states */
+};
+
+struct xen_pct_register {
+	uint8_t  descriptor;
+	uint16_t length;
+	uint8_t  space_id;
+	uint8_t  bit_width;
+	uint8_t  bit_offset;
+	uint8_t  reserved;
+	uint64_t address;
+};
+
+struct xen_processor_px {
+	uint64_t core_frequency; /* megahertz */
+	uint64_t power;      /* milliWatts */
+	uint64_t transition_latency; /* microseconds */
+	uint64_t bus_master_latency; /* microseconds */
+	uint64_t control;        /* control value */
+	uint64_t status;     /* success indicator */
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_processor_px);
+
+struct xen_psd_package {
+	uint64_t num_entries;
+	uint64_t revision;
+	uint64_t domain;
+	uint64_t coord_type;
+	uint64_t num_processors;
+};
+
+struct xen_processor_performance {
+	uint32_t flags;     /* flag for Px sub info type */
+	uint32_t platform_limit;  /* Platform limitation on freq usage */
+	struct xen_pct_register control_register;
+	struct xen_pct_register status_register;
+	uint32_t state_count;     /* total available performance states */
+	GUEST_HANDLE(xen_processor_px) states;
+	struct xen_psd_package domain_info;
+	uint32_t shared_type;     /* coordination type of this processor */
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_processor_performance);
+
+struct xenpf_set_processor_pminfo {
+	/* IN variables */
+	uint32_t id;    /* ACPI CPU ID */
+	uint32_t type;  /* {XEN_PM_CX, XEN_PM_PX} */
+	union {
+		struct xen_processor_power          power;/* Cx: _CST/_CSD */
+		struct xen_processor_performance    perf; /* Px: _PPC/_PCT/_PSS/_PSD */
+		GUEST_HANDLE(uint32_t)              pdc;
+	};
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_set_processor_pminfo);
+
+#define XENPF_get_cpuinfo 55
+struct xenpf_pcpuinfo {
+	/* IN */
+	uint32_t xen_cpuid;
+	/* OUT */
+	/* The maxium cpu_id that is present */
+	uint32_t max_present;
+#define XEN_PCPU_FLAGS_ONLINE   1
+	/* Correponding xen_cpuid is not present*/
+#define XEN_PCPU_FLAGS_INVALID  2
+	uint32_t flags;
+	uint32_t apic_id;
+	uint32_t acpi_id;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xenpf_pcpuinfo);
+
+struct xen_platform_op {
+	uint32_t cmd;
+	uint32_t interface_version; /* XENPF_INTERFACE_VERSION */
+	union {
+		struct xenpf_settime           settime;
+		struct xenpf_add_memtype       add_memtype;
+		struct xenpf_del_memtype       del_memtype;
+		struct xenpf_read_memtype      read_memtype;
+		struct xenpf_microcode_update  microcode;
+		struct xenpf_platform_quirk    platform_quirk;
+		struct xenpf_firmware_info     firmware_info;
+		struct xenpf_enter_acpi_sleep  enter_acpi_sleep;
+		struct xenpf_change_freq       change_freq;
+		struct xenpf_getidletime       getidletime;
+		struct xenpf_set_processor_pminfo set_pminfo;
+		struct xenpf_pcpuinfo          pcpu_info;
+		uint8_t                        pad[128];
+	} u;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_platform_op_t);
+
+#endif /* __XEN_PUBLIC_PLATFORM_H__ */
diff --git a/include/xen/interface/sched.h b/include/xen/interface/sched.h
new file mode 100644
index 00000000..dd55dac3
--- /dev/null
+++ b/include/xen/interface/sched.h
@@ -0,0 +1,111 @@
+/******************************************************************************
+ * sched.h
+ *
+ * Scheduler state interactions
+ *
+ * Copyright (c) 2005, Keir Fraser <keir@xensource.com>
+ */
+
+#ifndef __XEN_PUBLIC_SCHED_H__
+#define __XEN_PUBLIC_SCHED_H__
+
+#include "event_channel.h"
+
+/*
+ * The prototype for this hypercall is:
+ *  long sched_op_new(int cmd, void *arg)
+ * @cmd == SCHEDOP_??? (scheduler operation).
+ * @arg == Operation-specific extra argument(s), as described below.
+ *
+ * **NOTE**:
+ * Versions of Xen prior to 3.0.2 provide only the following legacy version
+ * of this hypercall, supporting only the commands yield, block and shutdown:
+ *  long sched_op(int cmd, unsigned long arg)
+ * @cmd == SCHEDOP_??? (scheduler operation).
+ * @arg == 0               (SCHEDOP_yield and SCHEDOP_block)
+ *      == SHUTDOWN_* code (SCHEDOP_shutdown)
+ */
+
+/*
+ * Voluntarily yield the CPU.
+ * @arg == NULL.
+ */
+#define SCHEDOP_yield       0
+
+/*
+ * Block execution of this VCPU until an event is received for processing.
+ * If called with event upcalls masked, this operation will atomically
+ * reenable event delivery and check for pending events before blocking the
+ * VCPU. This avoids a "wakeup waiting" race.
+ * @arg == NULL.
+ */
+#define SCHEDOP_block       1
+
+/*
+ * Halt execution of this domain (all VCPUs) and notify the system controller.
+ * @arg == pointer to sched_shutdown structure.
+ */
+#define SCHEDOP_shutdown    2
+struct sched_shutdown {
+    unsigned int reason; /* SHUTDOWN_* */
+};
+DEFINE_GUEST_HANDLE_STRUCT(sched_shutdown);
+
+/*
+ * Poll a set of event-channel ports. Return when one or more are pending. An
+ * optional timeout may be specified.
+ * @arg == pointer to sched_poll structure.
+ */
+#define SCHEDOP_poll        3
+struct sched_poll {
+    GUEST_HANDLE(evtchn_port_t) ports;
+    unsigned int nr_ports;
+    uint64_t timeout;
+};
+DEFINE_GUEST_HANDLE_STRUCT(sched_poll);
+
+/*
+ * Declare a shutdown for another domain. The main use of this function is
+ * in interpreting shutdown requests and reasons for fully-virtualized
+ * domains.  A para-virtualized domain may use SCHEDOP_shutdown directly.
+ * @arg == pointer to sched_remote_shutdown structure.
+ */
+#define SCHEDOP_remote_shutdown        4
+struct sched_remote_shutdown {
+    domid_t domain_id;         /* Remote domain ID */
+    unsigned int reason;       /* SHUTDOWN_xxx reason */
+};
+
+/*
+ * Latch a shutdown code, so that when the domain later shuts down it
+ * reports this code to the control tools.
+ * @arg == as for SCHEDOP_shutdown.
+ */
+#define SCHEDOP_shutdown_code 5
+
+/*
+ * Setup, poke and destroy a domain watchdog timer.
+ * @arg == pointer to sched_watchdog structure.
+ * With id == 0, setup a domain watchdog timer to cause domain shutdown
+ *               after timeout, returns watchdog id.
+ * With id != 0 and timeout == 0, destroy domain watchdog timer.
+ * With id != 0 and timeout != 0, poke watchdog timer and set new timeout.
+ */
+#define SCHEDOP_watchdog    6
+struct sched_watchdog {
+    uint32_t id;                /* watchdog ID */
+    uint32_t timeout;           /* timeout */
+};
+
+/*
+ * Reason codes for SCHEDOP_shutdown. These may be interpreted by control
+ * software to determine the appropriate action. For the most part, Xen does
+ * not care about the shutdown code.
+ */
+#define SHUTDOWN_poweroff   0  /* Domain exited normally. Clean up and kill. */
+#define SHUTDOWN_reboot     1  /* Clean up, kill, and then restart.          */
+#define SHUTDOWN_suspend    2  /* Clean up, save suspend info, kill.         */
+#define SHUTDOWN_crash      3  /* Tell controller we've crashed.             */
+#define SHUTDOWN_watchdog   4  /* Restart because watchdog time expired.     */
+
+#endif /* __XEN_PUBLIC_SCHED_H__ */
diff --git a/include/xen/interface/vcpu.h b/include/xen/interface/vcpu.h
new file mode 100644
index 00000000..87e6f8a4
--- /dev/null
+++ b/include/xen/interface/vcpu.h
@@ -0,0 +1,173 @@
+/******************************************************************************
+ * vcpu.h
+ *
+ * VCPU initialisation, query, and hotplug.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Copyright (c) 2005, Keir Fraser <keir@xensource.com>
+ */
+
+#ifndef __XEN_PUBLIC_VCPU_H__
+#define __XEN_PUBLIC_VCPU_H__
+
+/*
+ * Prototype for this hypercall is:
+ *	int vcpu_op(int cmd, int vcpuid, void *extra_args)
+ * @cmd		   == VCPUOP_??? (VCPU operation).
+ * @vcpuid	   == VCPU to operate on.
+ * @extra_args == Operation-specific extra arguments (NULL if none).
+ */
+
+/*
+ * Initialise a VCPU. Each VCPU can be initialised only once. A
+ * newly-initialised VCPU will not run until it is brought up by VCPUOP_up.
+ *
+ * @extra_arg == pointer to vcpu_guest_context structure containing initial
+ *				 state for the VCPU.
+ */
+#define VCPUOP_initialise			 0
+
+/*
+ * Bring up a VCPU. This makes the VCPU runnable. This operation will fail
+ * if the VCPU has not been initialised (VCPUOP_initialise).
+ */
+#define VCPUOP_up					 1
+
+/*
+ * Bring down a VCPU (i.e., make it non-runnable).
+ * There are a few caveats that callers should observe:
+ *	1. This operation may return, and VCPU_is_up may return false, before the
+ *	   VCPU stops running (i.e., the command is asynchronous). It is a good
+ *	   idea to ensure that the VCPU has entered a non-critical loop before
+ *	   bringing it down. Alternatively, this operation is guaranteed
+ *	   synchronous if invoked by the VCPU itself.
+ *	2. After a VCPU is initialised, there is currently no way to drop all its
+ *	   references to domain memory. Even a VCPU that is down still holds
+ *	   memory references via its pagetable base pointer and GDT. It is good
+ *	   practise to move a VCPU onto an 'idle' or default page table, LDT and
+ *	   GDT before bringing it down.
+ */
+#define VCPUOP_down					 2
+
+/* Returns 1 if the given VCPU is up. */
+#define VCPUOP_is_up				 3
+
+/*
+ * Return information about the state and running time of a VCPU.
+ * @extra_arg == pointer to vcpu_runstate_info structure.
+ */
+#define VCPUOP_get_runstate_info	 4
+struct vcpu_runstate_info {
+		/* VCPU's current state (RUNSTATE_*). */
+		int		 state;
+		/* When was current state entered (system time, ns)? */
+		uint64_t state_entry_time;
+		/*
+		 * Time spent in each RUNSTATE_* (ns). The sum of these times is
+		 * guaranteed not to drift from system time.
+		 */
+		uint64_t time[4];
+};
+DEFINE_GUEST_HANDLE_STRUCT(vcpu_runstate_info);
+
+/* VCPU is currently running on a physical CPU. */
+#define RUNSTATE_running  0
+
+/* VCPU is runnable, but not currently scheduled on any physical CPU. */
+#define RUNSTATE_runnable 1
+
+/* VCPU is blocked (a.k.a. idle). It is therefore not runnable. */
+#define RUNSTATE_blocked  2
+
+/*
+ * VCPU is not runnable, but it is not blocked.
+ * This is a 'catch all' state for things like hotplug and pauses by the
+ * system administrator (or for critical sections in the hypervisor).
+ * RUNSTATE_blocked dominates this state (it is the preferred state).
+ */
+#define RUNSTATE_offline  3
+
+/*
+ * Register a shared memory area from which the guest may obtain its own
+ * runstate information without needing to execute a hypercall.
+ * Notes:
+ *	1. The registered address may be virtual or physical, depending on the
+ *	   platform. The virtual address should be registered on x86 systems.
+ *	2. Only one shared area may be registered per VCPU. The shared area is
+ *	   updated by the hypervisor each time the VCPU is scheduled. Thus
+ *	   runstate.state will always be RUNSTATE_running and
+ *	   runstate.state_entry_time will indicate the system time at which the
+ *	   VCPU was last scheduled to run.
+ * @extra_arg == pointer to vcpu_register_runstate_memory_area structure.
+ */
+#define VCPUOP_register_runstate_memory_area 5
+struct vcpu_register_runstate_memory_area {
+		union {
+				GUEST_HANDLE(vcpu_runstate_info) h;
+				struct vcpu_runstate_info *v;
+				uint64_t p;
+		} addr;
+};
+
+/*
+ * Set or stop a VCPU's periodic timer. Every VCPU has one periodic timer
+ * which can be set via these commands. Periods smaller than one millisecond
+ * may not be supported.
+ */
+#define VCPUOP_set_periodic_timer	 6 /* arg == vcpu_set_periodic_timer_t */
+#define VCPUOP_stop_periodic_timer	 7 /* arg == NULL */
+struct vcpu_set_periodic_timer {
+		uint64_t period_ns;
+};
+DEFINE_GUEST_HANDLE_STRUCT(vcpu_set_periodic_timer);
+
+/*
+ * Set or stop a VCPU's single-shot timer. Every VCPU has one single-shot
+ * timer which can be set via these commands.
+ */
+#define VCPUOP_set_singleshot_timer	 8 /* arg == vcpu_set_singleshot_timer_t */
+#define VCPUOP_stop_singleshot_timer 9 /* arg == NULL */
+struct vcpu_set_singleshot_timer {
+		uint64_t timeout_abs_ns;
+		uint32_t flags;			   /* VCPU_SSHOTTMR_??? */
+};
+DEFINE_GUEST_HANDLE_STRUCT(vcpu_set_singleshot_timer);
+
+/* Flags to VCPUOP_set_singleshot_timer. */
+ /* Require the timeout to be in the future (return -ETIME if it's passed). */
+#define _VCPU_SSHOTTMR_future (0)
+#define VCPU_SSHOTTMR_future  (1U << _VCPU_SSHOTTMR_future)
+
+/*
+ * Register a memory location in the guest address space for the
+ * vcpu_info structure.  This allows the guest to place the vcpu_info
+ * structure in a convenient place, such as in a per-cpu data area.
+ * The pointer need not be page aligned, but the structure must not
+ * cross a page boundary.
+ */
+#define VCPUOP_register_vcpu_info   10  /* arg == struct vcpu_info */
+struct vcpu_register_vcpu_info {
+    uint64_t mfn;    /* mfn of page to place vcpu_info */
+    uint32_t offset; /* offset within page */
+    uint32_t rsvd;   /* unused */
+};
+DEFINE_GUEST_HANDLE_STRUCT(vcpu_register_vcpu_info);
+
+#endif /* __XEN_PUBLIC_VCPU_H__ */
diff --git a/include/xen/interface/version.h b/include/xen/interface/version.h
new file mode 100644
index 00000000..e8b6519d
--- /dev/null
+++ b/include/xen/interface/version.h
@@ -0,0 +1,63 @@
+/******************************************************************************
+ * version.h
+ *
+ * Xen version, type, and compile information.
+ *
+ * Copyright (c) 2005, Nguyen Anh Quynh <aquynh@gmail.com>
+ * Copyright (c) 2005, Keir Fraser <keir@xensource.com>
+ */
+
+#ifndef __XEN_PUBLIC_VERSION_H__
+#define __XEN_PUBLIC_VERSION_H__
+
+/* NB. All ops return zero on success, except XENVER_version. */
+
+/* arg == NULL; returns major:minor (16:16). */
+#define XENVER_version      0
+
+/* arg == xen_extraversion_t. */
+#define XENVER_extraversion 1
+struct xen_extraversion {
+    char extraversion[16];
+};
+#define XEN_EXTRAVERSION_LEN (sizeof(struct xen_extraversion))
+
+/* arg == xen_compile_info_t. */
+#define XENVER_compile_info 2
+struct xen_compile_info {
+    char compiler[64];
+    char compile_by[16];
+    char compile_domain[32];
+    char compile_date[32];
+};
+
+#define XENVER_capabilities 3
+struct xen_capabilities_info {
+    char info[1024];
+};
+#define XEN_CAPABILITIES_INFO_LEN (sizeof(struct xen_capabilities_info))
+
+#define XENVER_changeset 4
+struct xen_changeset_info {
+    char info[64];
+};
+#define XEN_CHANGESET_INFO_LEN (sizeof(struct xen_changeset_info))
+
+#define XENVER_platform_parameters 5
+struct xen_platform_parameters {
+    unsigned long virt_start;
+};
+
+#define XENVER_get_features 6
+struct xen_feature_info {
+    unsigned int submap_idx;    /* IN: which 32-bit submap to return */
+    uint32_t     submap;        /* OUT: 32-bit submap */
+};
+
+/* Declares the features reported by XENVER_get_features. */
+#include "features.h"
+
+/* arg == NULL; returns host memory page size. */
+#define XENVER_pagesize 7
+
+#endif /* __XEN_PUBLIC_VERSION_H__ */
diff --git a/include/xen/interface/xen.h b/include/xen/interface/xen.h
new file mode 100644
index 00000000..a8908049
--- /dev/null
+++ b/include/xen/interface/xen.h
@@ -0,0 +1,535 @@
+/******************************************************************************
+ * xen.h
+ *
+ * Guest OS interface to Xen.
+ *
+ * Copyright (c) 2004, K A Fraser
+ */
+
+#ifndef __XEN_PUBLIC_XEN_H__
+#define __XEN_PUBLIC_XEN_H__
+
+#include <asm/xen/interface.h>
+#include <asm/pvclock-abi.h>
+
+/*
+ * XEN "SYSTEM CALLS" (a.k.a. HYPERCALLS).
+ */
+
+/*
+ * x86_32: EAX = vector; EBX, ECX, EDX, ESI, EDI = args 1, 2, 3, 4, 5.
+ *         EAX = return value
+ *         (argument registers may be clobbered on return)
+ * x86_64: RAX = vector; RDI, RSI, RDX, R10, R8, R9 = args 1, 2, 3, 4, 5, 6.
+ *         RAX = return value
+ *         (argument registers not clobbered on return; RCX, R11 are)
+ */
+#define __HYPERVISOR_set_trap_table        0
+#define __HYPERVISOR_mmu_update            1
+#define __HYPERVISOR_set_gdt               2
+#define __HYPERVISOR_stack_switch          3
+#define __HYPERVISOR_set_callbacks         4
+#define __HYPERVISOR_fpu_taskswitch        5
+#define __HYPERVISOR_sched_op_compat       6
+#define __HYPERVISOR_dom0_op               7
+#define __HYPERVISOR_set_debugreg          8
+#define __HYPERVISOR_get_debugreg          9
+#define __HYPERVISOR_update_descriptor    10
+#define __HYPERVISOR_memory_op            12
+#define __HYPERVISOR_multicall            13
+#define __HYPERVISOR_update_va_mapping    14
+#define __HYPERVISOR_set_timer_op         15
+#define __HYPERVISOR_event_channel_op_compat 16
+#define __HYPERVISOR_xen_version          17
+#define __HYPERVISOR_console_io           18
+#define __HYPERVISOR_physdev_op_compat    19
+#define __HYPERVISOR_grant_table_op       20
+#define __HYPERVISOR_vm_assist            21
+#define __HYPERVISOR_update_va_mapping_otherdomain 22
+#define __HYPERVISOR_iret                 23 /* x86 only */
+#define __HYPERVISOR_vcpu_op              24
+#define __HYPERVISOR_set_segment_base     25 /* x86/64 only */
+#define __HYPERVISOR_mmuext_op            26
+#define __HYPERVISOR_acm_op               27
+#define __HYPERVISOR_nmi_op               28
+#define __HYPERVISOR_sched_op             29
+#define __HYPERVISOR_callback_op          30
+#define __HYPERVISOR_xenoprof_op          31
+#define __HYPERVISOR_event_channel_op     32
+#define __HYPERVISOR_physdev_op           33
+#define __HYPERVISOR_hvm_op               34
+#define __HYPERVISOR_tmem_op              38
+
+/* Architecture-specific hypercall definitions. */
+#define __HYPERVISOR_arch_0               48
+#define __HYPERVISOR_arch_1               49
+#define __HYPERVISOR_arch_2               50
+#define __HYPERVISOR_arch_3               51
+#define __HYPERVISOR_arch_4               52
+#define __HYPERVISOR_arch_5               53
+#define __HYPERVISOR_arch_6               54
+#define __HYPERVISOR_arch_7               55
+
+/*
+ * VIRTUAL INTERRUPTS
+ *
+ * Virtual interrupts that a guest OS may receive from Xen.
+ */
+#define VIRQ_TIMER      0  /* Timebase update, and/or requested timeout.  */
+#define VIRQ_DEBUG      1  /* Request guest to dump debug info.           */
+#define VIRQ_CONSOLE    2  /* (DOM0) Bytes received on emergency console. */
+#define VIRQ_DOM_EXC    3  /* (DOM0) Exceptional event for some domain.   */
+#define VIRQ_DEBUGGER   6  /* (DOM0) A domain has paused for debugging.   */
+
+/* Architecture-specific VIRQ definitions. */
+#define VIRQ_ARCH_0    16
+#define VIRQ_ARCH_1    17
+#define VIRQ_ARCH_2    18
+#define VIRQ_ARCH_3    19
+#define VIRQ_ARCH_4    20
+#define VIRQ_ARCH_5    21
+#define VIRQ_ARCH_6    22
+#define VIRQ_ARCH_7    23
+
+#define NR_VIRQS       24
+/*
+ * MMU-UPDATE REQUESTS
+ *
+ * HYPERVISOR_mmu_update() accepts a list of (ptr, val) pairs.
+ * A foreigndom (FD) can be specified (or DOMID_SELF for none).
+ * Where the FD has some effect, it is described below.
+ * ptr[1:0] specifies the appropriate MMU_* command.
+ *
+ * ptr[1:0] == MMU_NORMAL_PT_UPDATE:
+ * Updates an entry in a page table. If updating an L1 table, and the new
+ * table entry is valid/present, the mapped frame must belong to the FD, if
+ * an FD has been specified. If attempting to map an I/O page then the
+ * caller assumes the privilege of the FD.
+ * FD == DOMID_IO: Permit /only/ I/O mappings, at the priv level of the caller.
+ * FD == DOMID_XEN: Map restricted areas of Xen's heap space.
+ * ptr[:2]  -- Machine address of the page-table entry to modify.
+ * val      -- Value to write.
+ *
+ * ptr[1:0] == MMU_MACHPHYS_UPDATE:
+ * Updates an entry in the machine->pseudo-physical mapping table.
+ * ptr[:2]  -- Machine address within the frame whose mapping to modify.
+ *             The frame must belong to the FD, if one is specified.
+ * val      -- Value to write into the mapping entry.
+ *
+ * ptr[1:0] == MMU_PT_UPDATE_PRESERVE_AD:
+ * As MMU_NORMAL_PT_UPDATE above, but A/D bits currently in the PTE are ORed
+ * with those in @val.
+ */
+#define MMU_NORMAL_PT_UPDATE      0 /* checked '*ptr = val'. ptr is MA.       */
+#define MMU_MACHPHYS_UPDATE       1 /* ptr = MA of frame to modify entry for  */
+#define MMU_PT_UPDATE_PRESERVE_AD 2 /* atomically: *ptr = val | (*ptr&(A|D)) */
+
+/*
+ * MMU EXTENDED OPERATIONS
+ *
+ * HYPERVISOR_mmuext_op() accepts a list of mmuext_op structures.
+ * A foreigndom (FD) can be specified (or DOMID_SELF for none).
+ * Where the FD has some effect, it is described below.
+ *
+ * cmd: MMUEXT_(UN)PIN_*_TABLE
+ * mfn: Machine frame number to be (un)pinned as a p.t. page.
+ *      The frame must belong to the FD, if one is specified.
+ *
+ * cmd: MMUEXT_NEW_BASEPTR
+ * mfn: Machine frame number of new page-table base to install in MMU.
+ *
+ * cmd: MMUEXT_NEW_USER_BASEPTR [x86/64 only]
+ * mfn: Machine frame number of new page-table base to install in MMU
+ *      when in user space.
+ *
+ * cmd: MMUEXT_TLB_FLUSH_LOCAL
+ * No additional arguments. Flushes local TLB.
+ *
+ * cmd: MMUEXT_INVLPG_LOCAL
+ * linear_addr: Linear address to be flushed from the local TLB.
+ *
+ * cmd: MMUEXT_TLB_FLUSH_MULTI
+ * vcpumask: Pointer to bitmap of VCPUs to be flushed.
+ *
+ * cmd: MMUEXT_INVLPG_MULTI
+ * linear_addr: Linear address to be flushed.
+ * vcpumask: Pointer to bitmap of VCPUs to be flushed.
+ *
+ * cmd: MMUEXT_TLB_FLUSH_ALL
+ * No additional arguments. Flushes all VCPUs' TLBs.
+ *
+ * cmd: MMUEXT_INVLPG_ALL
+ * linear_addr: Linear address to be flushed from all VCPUs' TLBs.
+ *
+ * cmd: MMUEXT_FLUSH_CACHE
+ * No additional arguments. Writes back and flushes cache contents.
+ *
+ * cmd: MMUEXT_SET_LDT
+ * linear_addr: Linear address of LDT base (NB. must be page-aligned).
+ * nr_ents: Number of entries in LDT.
+ */
+#define MMUEXT_PIN_L1_TABLE      0
+#define MMUEXT_PIN_L2_TABLE      1
+#define MMUEXT_PIN_L3_TABLE      2
+#define MMUEXT_PIN_L4_TABLE      3
+#define MMUEXT_UNPIN_TABLE       4
+#define MMUEXT_NEW_BASEPTR       5
+#define MMUEXT_TLB_FLUSH_LOCAL   6
+#define MMUEXT_INVLPG_LOCAL      7
+#define MMUEXT_TLB_FLUSH_MULTI   8
+#define MMUEXT_INVLPG_MULTI      9
+#define MMUEXT_TLB_FLUSH_ALL    10
+#define MMUEXT_INVLPG_ALL       11
+#define MMUEXT_FLUSH_CACHE      12
+#define MMUEXT_SET_LDT          13
+#define MMUEXT_NEW_USER_BASEPTR 15
+
+#ifndef __ASSEMBLY__
+struct mmuext_op {
+	unsigned int cmd;
+	union {
+		/* [UN]PIN_TABLE, NEW_BASEPTR, NEW_USER_BASEPTR */
+		unsigned long mfn;
+		/* INVLPG_LOCAL, INVLPG_ALL, SET_LDT */
+		unsigned long linear_addr;
+	} arg1;
+	union {
+		/* SET_LDT */
+		unsigned int nr_ents;
+		/* TLB_FLUSH_MULTI, INVLPG_MULTI */
+		void *vcpumask;
+	} arg2;
+};
+DEFINE_GUEST_HANDLE_STRUCT(mmuext_op);
+#endif
+
+/* These are passed as 'flags' to update_va_mapping. They can be ORed. */
+/* When specifying UVMF_MULTI, also OR in a pointer to a CPU bitmap.   */
+/* UVMF_LOCAL is merely UVMF_MULTI with a NULL bitmap pointer.         */
+#define UVMF_NONE               (0UL<<0) /* No flushing at all.   */
+#define UVMF_TLB_FLUSH          (1UL<<0) /* Flush entire TLB(s).  */
+#define UVMF_INVLPG             (2UL<<0) /* Flush only one entry. */
+#define UVMF_FLUSHTYPE_MASK     (3UL<<0)
+#define UVMF_MULTI              (0UL<<2) /* Flush subset of TLBs. */
+#define UVMF_LOCAL              (0UL<<2) /* Flush local TLB.      */
+#define UVMF_ALL                (1UL<<2) /* Flush all TLBs.       */
+
+/*
+ * Commands to HYPERVISOR_console_io().
+ */
+#define CONSOLEIO_write         0
+#define CONSOLEIO_read          1
+
+/*
+ * Commands to HYPERVISOR_vm_assist().
+ */
+#define VMASST_CMD_enable                0
+#define VMASST_CMD_disable               1
+#define VMASST_TYPE_4gb_segments         0
+#define VMASST_TYPE_4gb_segments_notify  1
+#define VMASST_TYPE_writable_pagetables  2
+#define VMASST_TYPE_pae_extended_cr3     3
+#define MAX_VMASST_TYPE 3
+
+#ifndef __ASSEMBLY__
+
+typedef uint16_t domid_t;
+
+/* Domain ids >= DOMID_FIRST_RESERVED cannot be used for ordinary domains. */
+#define DOMID_FIRST_RESERVED (0x7FF0U)
+
+/* DOMID_SELF is used in certain contexts to refer to oneself. */
+#define DOMID_SELF (0x7FF0U)
+
+/*
+ * DOMID_IO is used to restrict page-table updates to mapping I/O memory.
+ * Although no Foreign Domain need be specified to map I/O pages, DOMID_IO
+ * is useful to ensure that no mappings to the OS's own heap are accidentally
+ * installed. (e.g., in Linux this could cause havoc as reference counts
+ * aren't adjusted on the I/O-mapping code path).
+ * This only makes sense in MMUEXT_SET_FOREIGNDOM, but in that context can
+ * be specified by any calling domain.
+ */
+#define DOMID_IO   (0x7FF1U)
+
+/*
+ * DOMID_XEN is used to allow privileged domains to map restricted parts of
+ * Xen's heap space (e.g., the machine_to_phys table).
+ * This only makes sense in MMUEXT_SET_FOREIGNDOM, and is only permitted if
+ * the caller is privileged.
+ */
+#define DOMID_XEN  (0x7FF2U)
+
+/*
+ * Send an array of these to HYPERVISOR_mmu_update().
+ * NB. The fields are natural pointer/address size for this architecture.
+ */
+struct mmu_update {
+    uint64_t ptr;       /* Machine address of PTE. */
+    uint64_t val;       /* New contents of PTE.    */
+};
+DEFINE_GUEST_HANDLE_STRUCT(mmu_update);
+
+/*
+ * Send an array of these to HYPERVISOR_multicall().
+ * NB. The fields are natural register size for this architecture.
+ */
+struct multicall_entry {
+    unsigned long op;
+    long result;
+    unsigned long args[6];
+};
+DEFINE_GUEST_HANDLE_STRUCT(multicall_entry);
+
+/*
+ * Event channel endpoints per domain:
+ *  1024 if a long is 32 bits; 4096 if a long is 64 bits.
+ */
+#define NR_EVENT_CHANNELS (sizeof(unsigned long) * sizeof(unsigned long) * 64)
+
+struct vcpu_time_info {
+	/*
+	 * Updates to the following values are preceded and followed
+	 * by an increment of 'version'. The guest can therefore
+	 * detect updates by looking for changes to 'version'. If the
+	 * least-significant bit of the version number is set then an
+	 * update is in progress and the guest must wait to read a
+	 * consistent set of values.  The correct way to interact with
+	 * the version number is similar to Linux's seqlock: see the
+	 * implementations of read_seqbegin/read_seqretry.
+	 */
+	uint32_t version;
+	uint32_t pad0;
+	uint64_t tsc_timestamp;   /* TSC at last update of time vals.  */
+	uint64_t system_time;     /* Time, in nanosecs, since boot.    */
+	/*
+	 * Current system time:
+	 *   system_time + ((tsc - tsc_timestamp) << tsc_shift) * tsc_to_system_mul
+	 * CPU frequency (Hz):
+	 *   ((10^9 << 32) / tsc_to_system_mul) >> tsc_shift
+	 */
+	uint32_t tsc_to_system_mul;
+	int8_t   tsc_shift;
+	int8_t   pad1[3];
+}; /* 32 bytes */
+
+struct vcpu_info {
+	/*
+	 * 'evtchn_upcall_pending' is written non-zero by Xen to indicate
+	 * a pending notification for a particular VCPU. It is then cleared
+	 * by the guest OS /before/ checking for pending work, thus avoiding
+	 * a set-and-check race. Note that the mask is only accessed by Xen
+	 * on the CPU that is currently hosting the VCPU. This means that the
+	 * pending and mask flags can be updated by the guest without special
+	 * synchronisation (i.e., no need for the x86 LOCK prefix).
+	 * This may seem suboptimal because if the pending flag is set by
+	 * a different CPU then an IPI may be scheduled even when the mask
+	 * is set. However, note:
+	 *  1. The task of 'interrupt holdoff' is covered by the per-event-
+	 *     channel mask bits. A 'noisy' event that is continually being
+	 *     triggered can be masked at source at this very precise
+	 *     granularity.
+	 *  2. The main purpose of the per-VCPU mask is therefore to restrict
+	 *     reentrant execution: whether for concurrency control, or to
+	 *     prevent unbounded stack usage. Whatever the purpose, we expect
+	 *     that the mask will be asserted only for short periods at a time,
+	 *     and so the likelihood of a 'spurious' IPI is suitably small.
+	 * The mask is read before making an event upcall to the guest: a
+	 * non-zero mask therefore guarantees that the VCPU will not receive
+	 * an upcall activation. The mask is cleared when the VCPU requests
+	 * to block: this avoids wakeup-waiting races.
+	 */
+	uint8_t evtchn_upcall_pending;
+	uint8_t evtchn_upcall_mask;
+	unsigned long evtchn_pending_sel;
+	struct arch_vcpu_info arch;
+	struct pvclock_vcpu_time_info time;
+}; /* 64 bytes (x86) */
+
+/*
+ * Xen/kernel shared data -- pointer provided in start_info.
+ * NB. We expect that this struct is smaller than a page.
+ */
+struct shared_info {
+	struct vcpu_info vcpu_info[MAX_VIRT_CPUS];
+
+	/*
+	 * A domain can create "event channels" on which it can send and receive
+	 * asynchronous event notifications. There are three classes of event that
+	 * are delivered by this mechanism:
+	 *  1. Bi-directional inter- and intra-domain connections. Domains must
+	 *     arrange out-of-band to set up a connection (usually by allocating
+	 *     an unbound 'listener' port and avertising that via a storage service
+	 *     such as xenstore).
+	 *  2. Physical interrupts. A domain with suitable hardware-access
+	 *     privileges can bind an event-channel port to a physical interrupt
+	 *     source.
+	 *  3. Virtual interrupts ('events'). A domain can bind an event-channel
+	 *     port to a virtual interrupt source, such as the virtual-timer
+	 *     device or the emergency console.
+	 *
+	 * Event channels are addressed by a "port index". Each channel is
+	 * associated with two bits of information:
+	 *  1. PENDING -- notifies the domain that there is a pending notification
+	 *     to be processed. This bit is cleared by the guest.
+	 *  2. MASK -- if this bit is clear then a 0->1 transition of PENDING
+	 *     will cause an asynchronous upcall to be scheduled. This bit is only
+	 *     updated by the guest. It is read-only within Xen. If a channel
+	 *     becomes pending while the channel is masked then the 'edge' is lost
+	 *     (i.e., when the channel is unmasked, the guest must manually handle
+	 *     pending notifications as no upcall will be scheduled by Xen).
+	 *
+	 * To expedite scanning of pending notifications, any 0->1 pending
+	 * transition on an unmasked channel causes a corresponding bit in a
+	 * per-vcpu selector word to be set. Each bit in the selector covers a
+	 * 'C long' in the PENDING bitfield array.
+	 */
+	unsigned long evtchn_pending[sizeof(unsigned long) * 8];
+	unsigned long evtchn_mask[sizeof(unsigned long) * 8];
+
+	/*
+	 * Wallclock time: updated only by control software. Guests should base
+	 * their gettimeofday() syscall on this wallclock-base value.
+	 */
+	struct pvclock_wall_clock wc;
+
+	struct arch_shared_info arch;
+
+};
+
+/*
+ * Start-of-day memory layout for the initial domain (DOM0):
+ *  1. The domain is started within contiguous virtual-memory region.
+ *  2. The contiguous region begins and ends on an aligned 4MB boundary.
+ *  3. The region start corresponds to the load address of the OS image.
+ *     If the load address is not 4MB aligned then the address is rounded down.
+ *  4. This the order of bootstrap elements in the initial virtual region:
+ *      a. relocated kernel image
+ *      b. initial ram disk              [mod_start, mod_len]
+ *      c. list of allocated page frames [mfn_list, nr_pages]
+ *      d. start_info_t structure        [register ESI (x86)]
+ *      e. bootstrap page tables         [pt_base, CR3 (x86)]
+ *      f. bootstrap stack               [register ESP (x86)]
+ *  5. Bootstrap elements are packed together, but each is 4kB-aligned.
+ *  6. The initial ram disk may be omitted.
+ *  7. The list of page frames forms a contiguous 'pseudo-physical' memory
+ *     layout for the domain. In particular, the bootstrap virtual-memory
+ *     region is a 1:1 mapping to the first section of the pseudo-physical map.
+ *  8. All bootstrap elements are mapped read-writable for the guest OS. The
+ *     only exception is the bootstrap page table, which is mapped read-only.
+ *  9. There is guaranteed to be at least 512kB padding after the final
+ *     bootstrap element. If necessary, the bootstrap virtual region is
+ *     extended by an extra 4MB to ensure this.
+ */
+
+#define MAX_GUEST_CMDLINE 1024
+struct start_info {
+	/* THE FOLLOWING ARE FILLED IN BOTH ON INITIAL BOOT AND ON RESUME.    */
+	char magic[32];             /* "xen-<version>-<platform>".            */
+	unsigned long nr_pages;     /* Total pages allocated to this domain.  */
+	unsigned long shared_info;  /* MACHINE address of shared info struct. */
+	uint32_t flags;             /* SIF_xxx flags.                         */
+	unsigned long store_mfn;    /* MACHINE page number of shared page.    */
+	uint32_t store_evtchn;      /* Event channel for store communication. */
+	union {
+		struct {
+			unsigned long mfn;  /* MACHINE page number of console page.   */
+			uint32_t  evtchn;   /* Event channel for console page.        */
+		} domU;
+		struct {
+			uint32_t info_off;  /* Offset of console_info struct.         */
+			uint32_t info_size; /* Size of console_info struct from start.*/
+		} dom0;
+	} console;
+	/* THE FOLLOWING ARE ONLY FILLED IN ON INITIAL BOOT (NOT RESUME).     */
+	unsigned long pt_base;      /* VIRTUAL address of page directory.     */
+	unsigned long nr_pt_frames; /* Number of bootstrap p.t. frames.       */
+	unsigned long mfn_list;     /* VIRTUAL address of page-frame list.    */
+	unsigned long mod_start;    /* VIRTUAL address of pre-loaded module.  */
+	unsigned long mod_len;      /* Size (bytes) of pre-loaded module.     */
+	int8_t cmd_line[MAX_GUEST_CMDLINE];
+};
+
+struct dom0_vga_console_info {
+	uint8_t video_type;
+#define XEN_VGATYPE_TEXT_MODE_3 0x03
+#define XEN_VGATYPE_VESA_LFB    0x23
+
+	union {
+		struct {
+			/* Font height, in pixels. */
+			uint16_t font_height;
+			/* Cursor location (column, row). */
+			uint16_t cursor_x, cursor_y;
+			/* Number of rows and columns (dimensions in characters). */
+			uint16_t rows, columns;
+		} text_mode_3;
+
+		struct {
+			/* Width and height, in pixels. */
+			uint16_t width, height;
+			/* Bytes per scan line. */
+			uint16_t bytes_per_line;
+			/* Bits per pixel. */
+			uint16_t bits_per_pixel;
+			/* LFB physical address, and size (in units of 64kB). */
+			uint32_t lfb_base;
+			uint32_t lfb_size;
+			/* RGB mask offsets and sizes, as defined by VBE 1.2+ */
+			uint8_t  red_pos, red_size;
+			uint8_t  green_pos, green_size;
+			uint8_t  blue_pos, blue_size;
+			uint8_t  rsvd_pos, rsvd_size;
+
+			/* VESA capabilities (offset 0xa, VESA command 0x4f00). */
+			uint32_t gbl_caps;
+			/* Mode attributes (offset 0x0, VESA command 0x4f01). */
+			uint16_t mode_attrs;
+		} vesa_lfb;
+	} u;
+};
+
+/* These flags are passed in the 'flags' field of start_info_t. */
+#define SIF_PRIVILEGED    (1<<0)  /* Is the domain privileged? */
+#define SIF_INITDOMAIN    (1<<1)  /* Is this the initial control domain? */
+#define SIF_PM_MASK       (0xFF<<8) /* reserve 1 byte for xen-pm options */
+
+typedef uint64_t cpumap_t;
+
+typedef uint8_t xen_domain_handle_t[16];
+
+/* Turn a plain number into a C unsigned long constant. */
+#define __mk_unsigned_long(x) x ## UL
+#define mk_unsigned_long(x) __mk_unsigned_long(x)
+
+#define TMEM_SPEC_VERSION 1
+
+struct tmem_op {
+	uint32_t cmd;
+	int32_t pool_id;
+	union {
+		struct {  /* for cmd == TMEM_NEW_POOL */
+			uint64_t uuid[2];
+			uint32_t flags;
+		} new;
+		struct {
+			uint64_t oid[3];
+			uint32_t index;
+			uint32_t tmem_offset;
+			uint32_t pfn_offset;
+			uint32_t len;
+			GUEST_HANDLE(void) gmfn; /* guest machine page frame */
+		} gen;
+	} u;
+};
+
+DEFINE_GUEST_HANDLE(u64);
+
+#else /* __ASSEMBLY__ */
+
+/* In assembly code we cannot use C numeric constant suffixes. */
+#define mk_unsigned_long(x) x
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __XEN_PUBLIC_XEN_H__ */
diff --git a/include/xen/interface/xencomm.h b/include/xen/interface/xencomm.h
new file mode 100644
index 00000000..ac45e071
--- /dev/null
+++ b/include/xen/interface/xencomm.h
@@ -0,0 +1,41 @@
+/*
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Copyright (C) IBM Corp. 2006
+ */
+
+#ifndef _XEN_XENCOMM_H_
+#define _XEN_XENCOMM_H_
+
+/* A xencomm descriptor is a scatter/gather list containing physical
+ * addresses corresponding to a virtually contiguous memory area. The
+ * hypervisor translates these physical addresses to machine addresses to copy
+ * to and from the virtually contiguous area.
+ */
+
+#define XENCOMM_MAGIC 0x58434F4D /* 'XCOM' */
+#define XENCOMM_INVALID (~0UL)
+
+struct xencomm_desc {
+    uint32_t magic;
+    uint32_t nr_addrs; /* the number of entries in address[] */
+    uint64_t address[0];
+};
+
+#endif /* _XEN_XENCOMM_H_ */
diff --git a/include/xen/page.h b/include/xen/page.h
new file mode 100644
index 00000000..12765b6f
--- /dev/null
+++ b/include/xen/page.h
@@ -0,0 +1,18 @@
+#ifndef _XEN_PAGE_H
+#define _XEN_PAGE_H
+
+#include <asm/xen/page.h>
+
+struct xen_memory_region {
+	phys_addr_t start;
+	phys_addr_t size;
+};
+
+#define XEN_EXTRA_MEM_MAX_REGIONS 128 /* == E820MAX */
+
+extern __initdata
+struct xen_memory_region xen_extra_mem[XEN_EXTRA_MEM_MAX_REGIONS];
+
+extern unsigned long xen_released_pages;
+
+#endif	/* _XEN_PAGE_H */
diff --git a/include/xen/platform_pci.h b/include/xen/platform_pci.h
new file mode 100644
index 00000000..438c256c
--- /dev/null
+++ b/include/xen/platform_pci.h
@@ -0,0 +1,51 @@
+#ifndef _XEN_PLATFORM_PCI_H
+#define _XEN_PLATFORM_PCI_H
+
+#define XEN_IOPORT_MAGIC_VAL 0x49d2
+#define XEN_IOPORT_LINUX_PRODNUM 0x0003
+#define XEN_IOPORT_LINUX_DRVVER  0x0001
+
+#define XEN_IOPORT_BASE 0x10
+
+#define XEN_IOPORT_PLATFLAGS	(XEN_IOPORT_BASE + 0) /* 1 byte access (R/W) */
+#define XEN_IOPORT_MAGIC	(XEN_IOPORT_BASE + 0) /* 2 byte access (R) */
+#define XEN_IOPORT_UNPLUG	(XEN_IOPORT_BASE + 0) /* 2 byte access (W) */
+#define XEN_IOPORT_DRVVER	(XEN_IOPORT_BASE + 0) /* 4 byte access (W) */
+
+#define XEN_IOPORT_SYSLOG	(XEN_IOPORT_BASE + 2) /* 1 byte access (W) */
+#define XEN_IOPORT_PROTOVER	(XEN_IOPORT_BASE + 2) /* 1 byte access (R) */
+#define XEN_IOPORT_PRODNUM	(XEN_IOPORT_BASE + 2) /* 2 byte access (W) */
+
+#define XEN_UNPLUG_ALL_IDE_DISKS	(1<<0)
+#define XEN_UNPLUG_ALL_NICS		(1<<1)
+#define XEN_UNPLUG_AUX_IDE_DISKS	(1<<2)
+#define XEN_UNPLUG_ALL			(XEN_UNPLUG_ALL_IDE_DISKS|\
+					 XEN_UNPLUG_ALL_NICS|\
+					 XEN_UNPLUG_AUX_IDE_DISKS)
+
+#define XEN_UNPLUG_UNNECESSARY 		(1<<16)
+#define XEN_UNPLUG_NEVER	 		(1<<17)
+
+static inline int xen_must_unplug_nics(void) {
+#if (defined(CONFIG_XEN_NETDEV_FRONTEND) || \
+		defined(CONFIG_XEN_NETDEV_FRONTEND_MODULE)) && \
+		defined(CONFIG_XEN_PVHVM)
+        return 1;
+#else
+        return 0;
+#endif
+}
+
+static inline int xen_must_unplug_disks(void) {
+#if (defined(CONFIG_XEN_BLKDEV_FRONTEND) || \
+		defined(CONFIG_XEN_BLKDEV_FRONTEND_MODULE)) && \
+		defined(CONFIG_XEN_PVHVM)
+        return 1;
+#else
+        return 0;
+#endif
+}
+
+extern int xen_platform_pci_unplug;
+
+#endif /* _XEN_PLATFORM_PCI_H */
diff --git a/include/xen/privcmd.h b/include/xen/privcmd.h
new file mode 100644
index 00000000..17857fb4
--- /dev/null
+++ b/include/xen/privcmd.h
@@ -0,0 +1,77 @@
+/******************************************************************************
+ * privcmd.h
+ *
+ * Interface to /proc/xen/privcmd.
+ *
+ * Copyright (c) 2003-2005, K A Fraser
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef __LINUX_PUBLIC_PRIVCMD_H__
+#define __LINUX_PUBLIC_PRIVCMD_H__
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+typedef unsigned long xen_pfn_t;
+
+struct privcmd_hypercall {
+	__u64 op;
+	__u64 arg[5];
+};
+
+struct privcmd_mmap_entry {
+	__u64 va;
+	__u64 mfn;
+	__u64 npages;
+};
+
+struct privcmd_mmap {
+	int num;
+	domid_t dom; /* target domain */
+	struct privcmd_mmap_entry __user *entry;
+};
+
+struct privcmd_mmapbatch {
+	int num;     /* number of pages to populate */
+	domid_t dom; /* target domain */
+	__u64 addr;  /* virtual address */
+	xen_pfn_t __user *arr; /* array of mfns - top nibble set on err */
+};
+
+/*
+ * @cmd: IOCTL_PRIVCMD_HYPERCALL
+ * @arg: &privcmd_hypercall_t
+ * Return: Value returned from execution of the specified hypercall.
+ */
+#define IOCTL_PRIVCMD_HYPERCALL					\
+	_IOC(_IOC_NONE, 'P', 0, sizeof(struct privcmd_hypercall))
+#define IOCTL_PRIVCMD_MMAP					\
+	_IOC(_IOC_NONE, 'P', 2, sizeof(struct privcmd_mmap))
+#define IOCTL_PRIVCMD_MMAPBATCH					\
+	_IOC(_IOC_NONE, 'P', 3, sizeof(struct privcmd_mmapbatch))
+
+#endif /* __LINUX_PUBLIC_PRIVCMD_H__ */
diff --git a/include/xen/swiotlb-xen.h b/include/xen/swiotlb-xen.h
new file mode 100644
index 00000000..4f4d449f
--- /dev/null
+++ b/include/xen/swiotlb-xen.h
@@ -0,0 +1,67 @@
+#ifndef __LINUX_SWIOTLB_XEN_H
+#define __LINUX_SWIOTLB_XEN_H
+
+#include <linux/swiotlb.h>
+
+extern void xen_swiotlb_init(int verbose);
+
+extern void
+*xen_swiotlb_alloc_coherent(struct device *hwdev, size_t size,
+			    dma_addr_t *dma_handle, gfp_t flags,
+			    struct dma_attrs *attrs);
+
+extern void
+xen_swiotlb_free_coherent(struct device *hwdev, size_t size,
+			  void *vaddr, dma_addr_t dma_handle,
+			  struct dma_attrs *attrs);
+
+extern dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page,
+				       unsigned long offset, size_t size,
+				       enum dma_data_direction dir,
+				       struct dma_attrs *attrs);
+
+extern void xen_swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
+				   size_t size, enum dma_data_direction dir,
+				   struct dma_attrs *attrs);
+/*
+extern int
+xen_swiotlb_map_sg(struct device *hwdev, struct scatterlist *sg, int nents,
+		   enum dma_data_direction dir);
+
+extern void
+xen_swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sg, int nents,
+		     enum dma_data_direction dir);
+*/
+extern int
+xen_swiotlb_map_sg_attrs(struct device *hwdev, struct scatterlist *sgl,
+			 int nelems, enum dma_data_direction dir,
+			 struct dma_attrs *attrs);
+
+extern void
+xen_swiotlb_unmap_sg_attrs(struct device *hwdev, struct scatterlist *sgl,
+			   int nelems, enum dma_data_direction dir,
+			   struct dma_attrs *attrs);
+
+extern void
+xen_swiotlb_sync_single_for_cpu(struct device *hwdev, dma_addr_t dev_addr,
+				size_t size, enum dma_data_direction dir);
+
+extern void
+xen_swiotlb_sync_sg_for_cpu(struct device *hwdev, struct scatterlist *sg,
+			    int nelems, enum dma_data_direction dir);
+
+extern void
+xen_swiotlb_sync_single_for_device(struct device *hwdev, dma_addr_t dev_addr,
+				   size_t size, enum dma_data_direction dir);
+
+extern void
+xen_swiotlb_sync_sg_for_device(struct device *hwdev, struct scatterlist *sg,
+			       int nelems, enum dma_data_direction dir);
+
+extern int
+xen_swiotlb_dma_mapping_error(struct device *hwdev, dma_addr_t dma_addr);
+
+extern int
+xen_swiotlb_dma_supported(struct device *hwdev, u64 mask);
+
+#endif /* __LINUX_SWIOTLB_XEN_H */
diff --git a/include/xen/tmem.h b/include/xen/tmem.h
new file mode 100644
index 00000000..591550a2
--- /dev/null
+++ b/include/xen/tmem.h
@@ -0,0 +1,9 @@
+#ifndef _XEN_TMEM_H
+#define _XEN_TMEM_H
+
+#include <linux/types.h>
+
+/* defined in drivers/xen/tmem.c */
+extern bool tmem_enabled;
+
+#endif /* _XEN_TMEM_H */
diff --git a/include/xen/xen-ops.h b/include/xen/xen-ops.h
new file mode 100644
index 00000000..6a198e46
--- /dev/null
+++ b/include/xen/xen-ops.h
@@ -0,0 +1,32 @@
+#ifndef INCLUDE_XEN_OPS_H
+#define INCLUDE_XEN_OPS_H
+
+#include <linux/percpu.h>
+
+DECLARE_PER_CPU(struct vcpu_info *, xen_vcpu);
+
+void xen_arch_pre_suspend(void);
+void xen_arch_post_suspend(int suspend_cancelled);
+void xen_arch_hvm_post_suspend(int suspend_cancelled);
+
+void xen_mm_pin_all(void);
+void xen_mm_unpin_all(void);
+
+void xen_timer_resume(void);
+void xen_arch_resume(void);
+
+int xen_setup_shutdown_event(void);
+
+extern unsigned long *xen_contiguous_bitmap;
+int xen_create_contiguous_region(unsigned long vstart, unsigned int order,
+				unsigned int address_bits);
+
+void xen_destroy_contiguous_region(unsigned long vstart, unsigned int order);
+
+struct vm_area_struct;
+int xen_remap_domain_mfn_range(struct vm_area_struct *vma,
+			       unsigned long addr,
+			       unsigned long mfn, int nr,
+			       pgprot_t prot, unsigned domid);
+
+#endif /* INCLUDE_XEN_OPS_H */
diff --git a/include/xen/xen.h b/include/xen/xen.h
new file mode 100644
index 00000000..a1640241
--- /dev/null
+++ b/include/xen/xen.h
@@ -0,0 +1,32 @@
+#ifndef _XEN_XEN_H
+#define _XEN_XEN_H
+
+enum xen_domain_type {
+	XEN_NATIVE,		/* running on bare hardware    */
+	XEN_PV_DOMAIN,		/* running in a PV domain      */
+	XEN_HVM_DOMAIN,		/* running in a Xen hvm domain */
+};
+
+#ifdef CONFIG_XEN
+extern enum xen_domain_type xen_domain_type;
+#else
+#define xen_domain_type		XEN_NATIVE
+#endif
+
+#define xen_domain()		(xen_domain_type != XEN_NATIVE)
+#define xen_pv_domain()		(xen_domain() &&			\
+				 xen_domain_type == XEN_PV_DOMAIN)
+#define xen_hvm_domain()	(xen_domain() &&			\
+				 xen_domain_type == XEN_HVM_DOMAIN)
+
+#ifdef CONFIG_XEN_DOM0
+#include <xen/interface/xen.h>
+#include <asm/xen/hypervisor.h>
+
+#define xen_initial_domain()	(xen_pv_domain() && \
+				 xen_start_info->flags & SIF_INITDOMAIN)
+#else  /* !CONFIG_XEN_DOM0 */
+#define xen_initial_domain()	(0)
+#endif	/* CONFIG_XEN_DOM0 */
+
+#endif	/* _XEN_XEN_H */
diff --git a/include/xen/xenbus.h b/include/xen/xenbus.h
new file mode 100644
index 00000000..0a7515c1
--- /dev/null
+++ b/include/xen/xenbus.h
@@ -0,0 +1,223 @@
+/******************************************************************************
+ * xenbus.h
+ *
+ * Talks to Xen Store to figure out what devices we have.
+ *
+ * Copyright (C) 2005 Rusty Russell, IBM Corporation
+ * Copyright (C) 2005 XenSource Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef _XEN_XENBUS_H
+#define _XEN_XENBUS_H
+
+#include <linux/device.h>
+#include <linux/notifier.h>
+#include <linux/mutex.h>
+#include <linux/export.h>
+#include <linux/completion.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <xen/interface/xen.h>
+#include <xen/interface/grant_table.h>
+#include <xen/interface/io/xenbus.h>
+#include <xen/interface/io/xs_wire.h>
+
+/* Register callback to watch this node. */
+struct xenbus_watch
+{
+	struct list_head list;
+
+	/* Path being watched. */
+	const char *node;
+
+	/* Callback (executed in a process context with no locks held). */
+	void (*callback)(struct xenbus_watch *,
+			 const char **vec, unsigned int len);
+};
+
+
+/* A xenbus device. */
+struct xenbus_device {
+	const char *devicetype;
+	const char *nodename;
+	const char *otherend;
+	int otherend_id;
+	struct xenbus_watch otherend_watch;
+	struct device dev;
+	enum xenbus_state state;
+	struct completion down;
+};
+
+static inline struct xenbus_device *to_xenbus_device(struct device *dev)
+{
+	return container_of(dev, struct xenbus_device, dev);
+}
+
+struct xenbus_device_id
+{
+	/* .../device/<device_type>/<identifier> */
+	char devicetype[32]; 	/* General class of device. */
+};
+
+/* A xenbus driver. */
+struct xenbus_driver {
+	const struct xenbus_device_id *ids;
+	int (*probe)(struct xenbus_device *dev,
+		     const struct xenbus_device_id *id);
+	void (*otherend_changed)(struct xenbus_device *dev,
+				 enum xenbus_state backend_state);
+	int (*remove)(struct xenbus_device *dev);
+	int (*suspend)(struct xenbus_device *dev);
+	int (*resume)(struct xenbus_device *dev);
+	int (*uevent)(struct xenbus_device *, struct kobj_uevent_env *);
+	struct device_driver driver;
+	int (*read_otherend_details)(struct xenbus_device *dev);
+	int (*is_ready)(struct xenbus_device *dev);
+};
+
+#define DEFINE_XENBUS_DRIVER(var, drvname, methods...)		\
+struct xenbus_driver var ## _driver = {				\
+	.driver.name = drvname + 0 ?: var ## _ids->devicetype,	\
+	.driver.owner = THIS_MODULE,				\
+	.ids = var ## _ids, ## methods				\
+}
+
+static inline struct xenbus_driver *to_xenbus_driver(struct device_driver *drv)
+{
+	return container_of(drv, struct xenbus_driver, driver);
+}
+
+int __must_check xenbus_register_frontend(struct xenbus_driver *);
+int __must_check xenbus_register_backend(struct xenbus_driver *);
+
+void xenbus_unregister_driver(struct xenbus_driver *drv);
+
+struct xenbus_transaction
+{
+	u32 id;
+};
+
+/* Nil transaction ID. */
+#define XBT_NIL ((struct xenbus_transaction) { 0 })
+
+char **xenbus_directory(struct xenbus_transaction t,
+			const char *dir, const char *node, unsigned int *num);
+void *xenbus_read(struct xenbus_transaction t,
+		  const char *dir, const char *node, unsigned int *len);
+int xenbus_write(struct xenbus_transaction t,
+		 const char *dir, const char *node, const char *string);
+int xenbus_mkdir(struct xenbus_transaction t,
+		 const char *dir, const char *node);
+int xenbus_exists(struct xenbus_transaction t,
+		  const char *dir, const char *node);
+int xenbus_rm(struct xenbus_transaction t, const char *dir, const char *node);
+int xenbus_transaction_start(struct xenbus_transaction *t);
+int xenbus_transaction_end(struct xenbus_transaction t, int abort);
+
+/* Single read and scanf: returns -errno or num scanned if > 0. */
+__scanf(4, 5)
+int xenbus_scanf(struct xenbus_transaction t,
+		 const char *dir, const char *node, const char *fmt, ...);
+
+/* Single printf and write: returns -errno or 0. */
+__printf(4, 5)
+int xenbus_printf(struct xenbus_transaction t,
+		  const char *dir, const char *node, const char *fmt, ...);
+
+/* Generic read function: NULL-terminated triples of name,
+ * sprintf-style type string, and pointer. Returns 0 or errno.*/
+int xenbus_gather(struct xenbus_transaction t, const char *dir, ...);
+
+/* notifer routines for when the xenstore comes up */
+extern int xenstored_ready;
+int register_xenstore_notifier(struct notifier_block *nb);
+void unregister_xenstore_notifier(struct notifier_block *nb);
+
+int register_xenbus_watch(struct xenbus_watch *watch);
+void unregister_xenbus_watch(struct xenbus_watch *watch);
+void xs_suspend(void);
+void xs_resume(void);
+void xs_suspend_cancel(void);
+
+/* Used by xenbus_dev to borrow kernel's store connection. */
+void *xenbus_dev_request_and_reply(struct xsd_sockmsg *msg);
+
+struct work_struct;
+
+/* Prepare for domain suspend: then resume or cancel the suspend. */
+void xenbus_suspend(void);
+void xenbus_resume(void);
+void xenbus_probe(struct work_struct *);
+void xenbus_suspend_cancel(void);
+
+#define XENBUS_IS_ERR_READ(str) ({			\
+	if (!IS_ERR(str) && strlen(str) == 0) {		\
+		kfree(str);				\
+		str = ERR_PTR(-ERANGE);			\
+	}						\
+	IS_ERR(str);					\
+})
+
+#define XENBUS_EXIST_ERR(err) ((err) == -ENOENT || (err) == -ERANGE)
+
+int xenbus_watch_path(struct xenbus_device *dev, const char *path,
+		      struct xenbus_watch *watch,
+		      void (*callback)(struct xenbus_watch *,
+				       const char **, unsigned int));
+__printf(4, 5)
+int xenbus_watch_pathfmt(struct xenbus_device *dev, struct xenbus_watch *watch,
+			 void (*callback)(struct xenbus_watch *,
+					  const char **, unsigned int),
+			 const char *pathfmt, ...);
+
+int xenbus_switch_state(struct xenbus_device *dev, enum xenbus_state new_state);
+int xenbus_grant_ring(struct xenbus_device *dev, unsigned long ring_mfn);
+int xenbus_map_ring_valloc(struct xenbus_device *dev,
+			   int gnt_ref, void **vaddr);
+int xenbus_map_ring(struct xenbus_device *dev, int gnt_ref,
+			   grant_handle_t *handle, void *vaddr);
+
+int xenbus_unmap_ring_vfree(struct xenbus_device *dev, void *vaddr);
+int xenbus_unmap_ring(struct xenbus_device *dev,
+		      grant_handle_t handle, void *vaddr);
+
+int xenbus_alloc_evtchn(struct xenbus_device *dev, int *port);
+int xenbus_bind_evtchn(struct xenbus_device *dev, int remote_port, int *port);
+int xenbus_free_evtchn(struct xenbus_device *dev, int port);
+
+enum xenbus_state xenbus_read_driver_state(const char *path);
+
+__printf(3, 4)
+void xenbus_dev_error(struct xenbus_device *dev, int err, const char *fmt, ...);
+__printf(3, 4)
+void xenbus_dev_fatal(struct xenbus_device *dev, int err, const char *fmt, ...);
+
+const char *xenbus_strstate(enum xenbus_state state);
+int xenbus_dev_is_online(struct xenbus_device *dev);
+int xenbus_frontend_closed(struct xenbus_device *dev);
+
+#endif /* _XEN_XENBUS_H */
diff --git a/include/xen/xenbus_dev.h b/include/xen/xenbus_dev.h
new file mode 100644
index 00000000..ac5f0fe4
--- /dev/null
+++ b/include/xen/xenbus_dev.h
@@ -0,0 +1,41 @@
+/******************************************************************************
+ * evtchn.h
+ *
+ * Interface to /dev/xen/xenbus_backend.
+ *
+ * Copyright (c) 2011 Bastian Blank <waldi@debian.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef __LINUX_XEN_XENBUS_DEV_H__
+#define __LINUX_XEN_XENBUS_DEV_H__
+
+#include <linux/ioctl.h>
+
+#define IOCTL_XENBUS_BACKEND_EVTCHN			\
+	_IOC(_IOC_NONE, 'B', 0, 0)
+
+#endif /* __LINUX_XEN_XENBUS_DEV_H__ */
diff --git a/include/xen/xencomm.h b/include/xen/xencomm.h
new file mode 100644
index 00000000..e43b039b
--- /dev/null
+++ b/include/xen/xencomm.h
@@ -0,0 +1,77 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * Copyright (C) IBM Corp. 2006
+ *
+ * Authors: Hollis Blanchard <hollisb@us.ibm.com>
+ *          Jerone Young <jyoung5@us.ibm.com>
+ */
+
+#ifndef _LINUX_XENCOMM_H_
+#define _LINUX_XENCOMM_H_
+
+#include <xen/interface/xencomm.h>
+
+#define XENCOMM_MINI_ADDRS 3
+struct xencomm_mini {
+	struct xencomm_desc _desc;
+	uint64_t address[XENCOMM_MINI_ADDRS];
+};
+
+/* To avoid additionnal virt to phys conversion, an opaque structure is
+   presented.  */
+struct xencomm_handle;
+
+extern void xencomm_free(struct xencomm_handle *desc);
+extern struct xencomm_handle *xencomm_map(void *ptr, unsigned long bytes);
+extern struct xencomm_handle *__xencomm_map_no_alloc(void *ptr,
+			unsigned long bytes,  struct xencomm_mini *xc_area);
+
+#if 0
+#define XENCOMM_MINI_ALIGNED(xc_desc, n)				\
+	struct xencomm_mini xc_desc ## _base[(n)]			\
+	__attribute__((__aligned__(sizeof(struct xencomm_mini))));	\
+	struct xencomm_mini *xc_desc = &xc_desc ## _base[0];
+#else
+/*
+ * gcc bug workaround:
+ * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=16660
+ * gcc doesn't handle properly stack variable with
+ * __attribute__((__align__(sizeof(struct xencomm_mini))))
+ */
+#define XENCOMM_MINI_ALIGNED(xc_desc, n)				\
+	unsigned char xc_desc ## _base[((n) + 1 ) *			\
+				       sizeof(struct xencomm_mini)];	\
+	struct xencomm_mini *xc_desc = (struct xencomm_mini *)		\
+		((unsigned long)xc_desc ## _base +			\
+		 (sizeof(struct xencomm_mini) -				\
+		  ((unsigned long)xc_desc ## _base) %			\
+		  sizeof(struct xencomm_mini)));
+#endif
+#define xencomm_map_no_alloc(ptr, bytes)			\
+	({ XENCOMM_MINI_ALIGNED(xc_desc, 1);			\
+		__xencomm_map_no_alloc(ptr, bytes, xc_desc); })
+
+/* provided by architecture code: */
+extern unsigned long xencomm_vtop(unsigned long vaddr);
+
+static inline void *xencomm_pa(void *ptr)
+{
+	return (void *)xencomm_vtop((unsigned long)ptr);
+}
+
+#define xen_guest_handle(hnd)  ((hnd).p)
+
+#endif /* _LINUX_XENCOMM_H_ */